From e81a8c7dabac05d444eda315ff1a747b0fe38396 Mon Sep 17 00:00:00 2001 From: Paul Burton Date: Tue, 22 Sep 2015 11:56:38 -0700 Subject: [PATCH] MIPS: Malta: Setup RAM regions via DT Move memory configuration to be performed via device tree for the Malta board. This moves more Malta specific code to malta-dtshim.c, leaving the rest of the mti-malta code a little more board-agnostic. This will be useful to share more code between boards, with the device tree providing the board specifics as intended. Since we can't rely upon Malta boards running a bootloader capable of handling devictrees & filling in the required information, a piece of shim code (malta_dt_shim) is added to consume the (e)memsize variables provided as part of the bootloader environment (or on the kernel command line) then generate the DT memory node using the provided values. Signed-off-by: Paul Burton Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: Kumar Gala Cc: linux-kernel@vger.kernel.org Cc: Ian Campbell Cc: Rob Herring Cc: James Hogan Cc: Pawel Moll Cc: Markos Chandras Cc: Mark Rutland Patchwork: https://patchwork.linux-mips.org/patch/11222/ Signed-off-by: Ralf Baechle --- arch/mips/Kconfig | 2 + arch/mips/boot/dts/mti/malta.dts | 4 + .../include/asm/mach-malta/malta-dtshim.h | 29 ++++ arch/mips/mti-malta/Makefile | 3 + arch/mips/mti-malta/malta-dtshim.c | 162 ++++++++++++++++++ arch/mips/mti-malta/malta-memory.c | 92 ---------- arch/mips/mti-malta/malta-setup.c | 5 +- 7 files changed, 204 insertions(+), 93 deletions(-) create mode 100644 arch/mips/include/asm/mach-malta/malta-dtshim.h create mode 100644 arch/mips/mti-malta/malta-dtshim.c diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 1943377ea491..703438a9698e 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -450,6 +450,8 @@ config MIPS_MALTA select SYS_SUPPORTS_ZBOOT select USE_OF select ZONE_DMA32 if 64BIT + select BUILTIN_DTB + select LIBFDT help This enables support for the MIPS Technologies Malta evaluation board. diff --git a/arch/mips/boot/dts/mti/malta.dts b/arch/mips/boot/dts/mti/malta.dts index c678115f5b7f..b18c46637d21 100644 --- a/arch/mips/boot/dts/mti/malta.dts +++ b/arch/mips/boot/dts/mti/malta.dts @@ -1,5 +1,9 @@ /dts-v1/; +/memreserve/ 0x00000000 0x00001000; /* YAMON exception vectors */ +/memreserve/ 0x00001000 0x000ef000; /* YAMON */ +/memreserve/ 0x000f0000 0x00010000; /* PIIX4 ISA memory */ + / { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/mips/include/asm/mach-malta/malta-dtshim.h b/arch/mips/include/asm/mach-malta/malta-dtshim.h new file mode 100644 index 000000000000..cfd777663c64 --- /dev/null +++ b/arch/mips/include/asm/mach-malta/malta-dtshim.h @@ -0,0 +1,29 @@ +/* + * Copyright (C) 2015 Imagination Technologies + * Author: Paul Burton + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __MIPS_MALTA_DTSHIM_H__ +#define __MIPS_MALTA_DTSHIM_H__ + +#include + +#ifdef CONFIG_MIPS_MALTA + +extern void __init *malta_dt_shim(void *fdt); + +#else /* !CONFIG_MIPS_MALTA */ + +static inline void *malta_dt_shim(void *fdt) +{ + return fdt; +} + +#endif /* !CONFIG_MIPS_MALTA */ + +#endif /* __MIPS_MALTA_DTSHIM_H__ */ diff --git a/arch/mips/mti-malta/Makefile b/arch/mips/mti-malta/Makefile index 87c85a5b4faf..5827af77c18e 100644 --- a/arch/mips/mti-malta/Makefile +++ b/arch/mips/mti-malta/Makefile @@ -7,6 +7,7 @@ # obj-y += malta-display.o obj-y += malta-dt.o +obj-y += malta-dtshim.o obj-y += malta-init.o obj-y += malta-int.o obj-y += malta-memory.o @@ -17,3 +18,5 @@ obj-y += malta-time.o obj-$(CONFIG_MIPS_CMP) += malta-amon.o obj-$(CONFIG_MIPS_MALTA_PM) += malta-pm.o + +CFLAGS_malta-dtshim.o = -I$(src)/../../../scripts/dtc/libfdt diff --git a/arch/mips/mti-malta/malta-dtshim.c b/arch/mips/mti-malta/malta-dtshim.c new file mode 100644 index 000000000000..f7133efc5843 --- /dev/null +++ b/arch/mips/mti-malta/malta-dtshim.c @@ -0,0 +1,162 @@ +/* + * Copyright (C) 2015 Imagination Technologies + * Author: Paul Burton + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +static unsigned char fdt_buf[16 << 10] __initdata; + +/* determined physical memory size, not overridden by command line args */ +extern unsigned long physical_memsize; + +#define MAX_MEM_ARRAY_ENTRIES 1 + +static unsigned __init gen_fdt_mem_array(__be32 *mem_array, unsigned long size) +{ + unsigned long size_preio; + unsigned entries; + + entries = 1; + mem_array[0] = cpu_to_be32(PHYS_OFFSET); + if (config_enabled(CONFIG_EVA)) { + /* + * The current Malta EVA configuration is "special" in that it + * always makes use of addresses in the upper half of the 32 bit + * physical address map, which gives it a contiguous region of + * DDR but limits it to 2GB. + */ + mem_array[1] = cpu_to_be32(size); + } else { + size_preio = min_t(unsigned long, size, SZ_256M); + mem_array[1] = cpu_to_be32(size_preio); + } + + BUG_ON(entries > MAX_MEM_ARRAY_ENTRIES); + return entries; +} + +static void __init append_memory(void *fdt, int root_off) +{ + __be32 mem_array[2 * MAX_MEM_ARRAY_ENTRIES]; + unsigned long memsize; + unsigned mem_entries; + int i, err, mem_off; + char *var, param_name[10], *var_names[] = { + "ememsize", "memsize", + }; + + /* if a memory node already exists, leave it alone */ + mem_off = fdt_path_offset(fdt, "/memory"); + if (mem_off >= 0) + return; + + /* find memory size from the bootloader environment */ + for (i = 0; i < ARRAY_SIZE(var_names); i++) { + var = fw_getenv(var_names[i]); + if (!var) + continue; + + err = kstrtoul(var, 0, &physical_memsize); + if (!err) + break; + + pr_warn("Failed to read the '%s' env variable '%s'\n", + var_names[i], var); + } + + if (!physical_memsize) { + pr_warn("The bootloader didn't provide memsize: defaulting to 32MB\n"); + physical_memsize = 32 << 20; + } + + if (config_enabled(CONFIG_CPU_BIG_ENDIAN)) { + /* + * SOC-it swaps, or perhaps doesn't swap, when DMA'ing + * the last word of physical memory. + */ + physical_memsize -= PAGE_SIZE; + } + + /* default to using all available RAM */ + memsize = physical_memsize; + + /* allow the user to override the usable memory */ + for (i = 0; i < ARRAY_SIZE(var_names); i++) { + snprintf(param_name, sizeof(param_name), "%s=", var_names[i]); + var = strstr(arcs_cmdline, param_name); + if (!var) + continue; + + memsize = memparse(var + strlen(param_name), NULL); + } + + /* if the user says there's more RAM than we thought, believe them */ + physical_memsize = max_t(unsigned long, physical_memsize, memsize); + + /* append memory to the DT */ + mem_off = fdt_add_subnode(fdt, root_off, "memory"); + if (mem_off < 0) + panic("Unable to add memory node to DT: %d", mem_off); + + err = fdt_setprop_string(fdt, mem_off, "device_type", "memory"); + if (err) + panic("Unable to set memory node device_type: %d", err); + + mem_entries = gen_fdt_mem_array(mem_array, physical_memsize); + err = fdt_setprop(fdt, mem_off, "reg", mem_array, + mem_entries * 2 * sizeof(mem_array[0])); + if (err) + panic("Unable to set memory regs property: %d", err); + + mem_entries = gen_fdt_mem_array(mem_array, memsize); + err = fdt_setprop(fdt, mem_off, "linux,usable-memory", mem_array, + mem_entries * 2 * sizeof(mem_array[0])); + if (err) + panic("Unable to set linux,usable-memory property: %d", err); +} + +void __init *malta_dt_shim(void *fdt) +{ + int root_off, len, err; + const char *compat; + + if (fdt_check_header(fdt)) + panic("Corrupt DT"); + + err = fdt_open_into(fdt, fdt_buf, sizeof(fdt_buf)); + if (err) + panic("Unable to open FDT: %d", err); + + root_off = fdt_path_offset(fdt_buf, "/"); + if (root_off < 0) + panic("No / node in DT"); + + compat = fdt_getprop(fdt_buf, root_off, "compatible", &len); + if (!compat) + panic("No root compatible property in DT: %d", len); + + /* if this isn't Malta, leave the DT alone */ + if (strncmp(compat, "mti,malta", len)) + return fdt; + + append_memory(fdt_buf, root_off); + + err = fdt_pack(fdt_buf); + if (err) + panic("Unable to pack FDT: %d\n", err); + + return fdt_buf; +} diff --git a/arch/mips/mti-malta/malta-memory.c b/arch/mips/mti-malta/malta-memory.c index 93ace96a1aa8..d5f8dae6a797 100644 --- a/arch/mips/mti-malta/malta-memory.c +++ b/arch/mips/mti-malta/malta-memory.c @@ -32,101 +32,9 @@ static void free_init_pages_eva_malta(void *begin, void *end) void __init fw_meminit(void) { - char *memsize_str, *ememsize_str = NULL, *ptr; - unsigned long memsize = 0, ememsize = 0; - unsigned long kernel_start_phys, kernel_end_phys; - static char cmdline[COMMAND_LINE_SIZE] __initdata; bool eva = config_enabled(CONFIG_EVA); - int tmp; free_init_pages_eva = eva ? free_init_pages_eva_malta : NULL; - - memsize_str = fw_getenv("memsize"); - if (memsize_str) { - tmp = kstrtoul(memsize_str, 0, &memsize); - if (tmp) - pr_warn("Failed to read the 'memsize' env variable.\n"); - } - if (eva) { - /* Look for ememsize for EVA */ - ememsize_str = fw_getenv("ememsize"); - if (ememsize_str) { - tmp = kstrtoul(ememsize_str, 0, &ememsize); - if (tmp) - pr_warn("Failed to read the 'ememsize' env variable.\n"); - } - } - if (!memsize && !ememsize) { - pr_warn("memsize not set in YAMON, set to default (32Mb)\n"); - physical_memsize = 0x02000000; - } else { - if (memsize > (256 << 20)) { /* memsize should be capped to 256M */ - pr_warn("Unsupported memsize value (0x%lx) detected! " - "Using 0x10000000 (256M) instead\n", - memsize); - memsize = 256 << 20; - } - /* If ememsize is set, then set physical_memsize to that */ - physical_memsize = ememsize ? : memsize; - } - -#ifdef CONFIG_CPU_BIG_ENDIAN - /* SOC-it swaps, or perhaps doesn't swap, when DMA'ing the last - word of physical memory */ - physical_memsize -= PAGE_SIZE; -#endif - - /* Check the command line for a memsize directive that overrides - the physical/default amount */ - strcpy(cmdline, arcs_cmdline); - ptr = strstr(cmdline, "memsize="); - if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' ')) - ptr = strstr(ptr, " memsize="); - /* And now look for ememsize */ - if (eva) { - ptr = strstr(cmdline, "ememsize="); - if (ptr && (ptr != cmdline) && (*(ptr - 1) != ' ')) - ptr = strstr(ptr, " ememsize="); - } - - if (ptr) - memsize = memparse(ptr + 8 + (eva ? 1 : 0), &ptr); - else - memsize = physical_memsize; - - /* Last 64K for HIGHMEM arithmetics */ - if (memsize > 0x7fff0000) - memsize = 0x7fff0000; - - add_memory_region(PHYS_OFFSET, 0x00001000, BOOT_MEM_RESERVED); - - /* - * YAMON may still be using the region of memory from 0x1000 to 0xfffff - * if it has started secondary CPUs. - */ - add_memory_region(PHYS_OFFSET + 0x00001000, 0x000ef000, - BOOT_MEM_ROM_DATA); - - /* - * The area 0x000f0000-0x000fffff is allocated for BIOS memory by the - * south bridge and PCI access always forwarded to the ISA Bus and - * BIOSCS# is always generated. - * This mean that this area can't be used as DMA memory for PCI - * devices. - */ - add_memory_region(PHYS_OFFSET + 0x000f0000, 0x00010000, - BOOT_MEM_RESERVED); - - /* - * Reserve the memory used by kernel code, and allow the rest of RAM to - * be used. - */ - kernel_start_phys = PHYS_OFFSET + 0x00100000; - kernel_end_phys = PHYS_OFFSET + CPHYSADDR(PFN_ALIGN(&_end)); - add_memory_region(kernel_start_phys, kernel_end_phys, - BOOT_MEM_RESERVED); - add_memory_region(kernel_end_phys, memsize - kernel_end_phys, - BOOT_MEM_RAM); } void __init prom_free_prom_memory(void) diff --git a/arch/mips/mti-malta/malta-setup.c b/arch/mips/mti-malta/malta-setup.c index 9d1e7f5ec36c..4740c82fb97a 100644 --- a/arch/mips/mti-malta/malta-setup.c +++ b/arch/mips/mti-malta/malta-setup.c @@ -27,6 +27,7 @@ #include #include +#include #include #include #include @@ -250,8 +251,10 @@ static void __init bonito_quirks_setup(void) void __init plat_mem_setup(void) { unsigned int i; + void *fdt = __dtb_start; - __dt_setup_arch(__dtb_start); + fdt = malta_dt_shim(fdt); + __dt_setup_arch(fdt); if (config_enabled(CONFIG_EVA)) /* EVA has already been configured in mach-malta/kernel-init.h */ -- 2.25.1