From 03145864bd0fcac29e33442f39d67d4f28b0777c Mon Sep 17 00:00:00 2001 From: Russell King Date: Tue, 27 Feb 2018 15:52:57 +0000 Subject: [PATCH 1/1] sfp: support 1G BiDi (eg, FiberStore SFP-GE-BX) modules Some BiDi modules (eg, FiberStore SFP-GE-BX) are not compliant with 1000BASE-BX as they use different wavelengths from the 1000BASE-BX standard (eg, 1310nm/1550nm rather than 1310nm/1490nm). These modules support 1000BASE-X ethernet, so detect them by a failure to find any other support, the 8B10B encoding and a bit rate that falls within the 1Gbps window. Signed-off-by: Russell King Signed-off-by: David S. Miller --- drivers/net/phy/sfp-bus.c | 61 ++++++++++++++++++++++++--------------- 1 file changed, 38 insertions(+), 23 deletions(-) diff --git a/drivers/net/phy/sfp-bus.c b/drivers/net/phy/sfp-bus.c index 8961209ee949..15749428679e 100644 --- a/drivers/net/phy/sfp-bus.c +++ b/drivers/net/phy/sfp-bus.c @@ -180,10 +180,7 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id, unsigned long *support) { unsigned int br_min, br_nom, br_max; - - phylink_set(support, Autoneg); - phylink_set(support, Pause); - phylink_set(support, Asym_Pause); + __ETHTOOL_DECLARE_LINK_MODE_MASK(modes) = { 0, }; /* Decode the bitrate information to MBd */ br_min = br_nom = br_max = 0; @@ -201,20 +198,20 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id, /* Set ethtool support from the compliance fields. */ if (id->base.e10g_base_sr) - phylink_set(support, 10000baseSR_Full); + phylink_set(modes, 10000baseSR_Full); if (id->base.e10g_base_lr) - phylink_set(support, 10000baseLR_Full); + phylink_set(modes, 10000baseLR_Full); if (id->base.e10g_base_lrm) - phylink_set(support, 10000baseLRM_Full); + phylink_set(modes, 10000baseLRM_Full); if (id->base.e10g_base_er) - phylink_set(support, 10000baseER_Full); + phylink_set(modes, 10000baseER_Full); if (id->base.e1000_base_sx || id->base.e1000_base_lx || id->base.e1000_base_cx) - phylink_set(support, 1000baseX_Full); + phylink_set(modes, 1000baseX_Full); if (id->base.e1000_base_t) { - phylink_set(support, 1000baseT_Half); - phylink_set(support, 1000baseT_Full); + phylink_set(modes, 1000baseT_Half); + phylink_set(modes, 1000baseT_Full); } /* 1000Base-PX or 1000Base-BX10 */ @@ -228,20 +225,20 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id, if ((id->base.sfp_ct_passive || id->base.sfp_ct_active) && br_nom) { /* This may look odd, but some manufacturers use 12000MBd */ if (br_min <= 12000 && br_max >= 10300) - phylink_set(support, 10000baseCR_Full); + phylink_set(modes, 10000baseCR_Full); if (br_min <= 3200 && br_max >= 3100) - phylink_set(support, 2500baseX_Full); + phylink_set(modes, 2500baseX_Full); if (br_min <= 1300 && br_max >= 1200) - phylink_set(support, 1000baseX_Full); + phylink_set(modes, 1000baseX_Full); } if (id->base.sfp_ct_passive) { if (id->base.passive.sff8431_app_e) - phylink_set(support, 10000baseCR_Full); + phylink_set(modes, 10000baseCR_Full); } if (id->base.sfp_ct_active) { if (id->base.active.sff8431_app_e || id->base.active.sff8431_lim) { - phylink_set(support, 10000baseCR_Full); + phylink_set(modes, 10000baseCR_Full); } } @@ -249,18 +246,18 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id, case 0x00: /* Unspecified */ break; case 0x02: /* 100Gbase-SR4 or 25Gbase-SR */ - phylink_set(support, 100000baseSR4_Full); - phylink_set(support, 25000baseSR_Full); + phylink_set(modes, 100000baseSR4_Full); + phylink_set(modes, 25000baseSR_Full); break; case 0x03: /* 100Gbase-LR4 or 25Gbase-LR */ case 0x04: /* 100Gbase-ER4 or 25Gbase-ER */ - phylink_set(support, 100000baseLR4_ER4_Full); + phylink_set(modes, 100000baseLR4_ER4_Full); break; case 0x0b: /* 100Gbase-CR4 or 25Gbase-CR CA-L */ case 0x0c: /* 25Gbase-CR CA-S */ case 0x0d: /* 25Gbase-CR CA-N */ - phylink_set(support, 100000baseCR4_Full); - phylink_set(support, 25000baseCR_Full); + phylink_set(modes, 100000baseCR4_Full); + phylink_set(modes, 25000baseCR_Full); break; default: dev_warn(bus->sfp_dev, @@ -274,10 +271,28 @@ void sfp_parse_support(struct sfp_bus *bus, const struct sfp_eeprom_id *id, id->base.fc_speed_200 || id->base.fc_speed_400) { if (id->base.br_nominal >= 31) - phylink_set(support, 2500baseX_Full); + phylink_set(modes, 2500baseX_Full); if (id->base.br_nominal >= 12) - phylink_set(support, 1000baseX_Full); + phylink_set(modes, 1000baseX_Full); } + + /* If we haven't discovered any modes that this module supports, try + * the encoding and bitrate to determine supported modes. Some BiDi + * modules (eg, 1310nm/1550nm) are not 1000BASE-BX compliant due to + * the differing wavelengths, so do not set any transceiver bits. + */ + if (bitmap_empty(modes, __ETHTOOL_LINK_MODE_MASK_NBITS)) { + /* If the encoding and bit rate allows 1000baseX */ + if (id->base.encoding == SFP_ENCODING_8B10B && br_nom && + br_min <= 1300 && br_max >= 1200) + phylink_set(modes, 1000baseX_Full); + } + + bitmap_or(support, support, modes, __ETHTOOL_LINK_MODE_MASK_NBITS); + + phylink_set(support, Autoneg); + phylink_set(support, Pause); + phylink_set(support, Asym_Pause); } EXPORT_SYMBOL_GPL(sfp_parse_support); -- 2.25.1