git.kernel.dk Git - linux-2.6-block.git/log

net/mlx4_core: drop useless LIST_HEAD

Drop LIST_HEAD where the variable it declares has never
been used.

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier x;
@@
- LIST_HEAD(x);
... when != x
// </smpl>

Fixes: c82e9aa0a8bc ("mlx4_core: resource tracking for HCA resources used by guests")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum: drop useless LIST_HEAD

Drop LIST_HEAD where the variable it declares is never used.

The uses were removed in 244cd96adb5f ("net_sched: remove
list_head from tc_action"), but not the declaration.

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier x;
@@
- LIST_HEAD(x);
... when != x
// </smpl>

Fixes: 244cd96adb5f ("net_sched: remove list_head from tc_action")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5e: drop useless LIST_HEAD

Drop LIST_HEAD where the variable it declares is never used.

These became useless in 244cd96adb5f ("net_sched: remove list_head
from tc_action")

The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@@
identifier x;
@@
- LIST_HEAD(x);
... when != x
// </smpl>

Fixes: 244cd96adb5f ("net_sched: remove list_head from tc_action")
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/mlx5e: fix semicolon.cocci warnings

drivers/net/ethernet/mellanox/mlx5/core/en_rep.c:1339:57-58: Unneeded semicolon

Remove unneeded semicolon.

Generated by: scripts/coccinelle/misc/semicolon.cocci

Fixes: 4c8fb2986d44 ("net/mlx5e: Increase VF representors' SQ size to 128")
CC: Gavi Teitz <gavi@mellanox.com>
Signed-off-by: kbuild test robot <fengguang.wu@intel.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

staging: octeon: fix build failure with XFRM enabled

skb->sp doesn't exist anymore in the next-next tree, so mips defconfig
no longer builds. Use helper instead to reset the secpath.

Not even compile tested.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reported-by: Guenter Roeck <linux@roeck-us.net>
Fixes: 4165079ba328d ("net: switch secpath to use skb extension infrastructure")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./linux/kernel/git/davem/net

Merge git://git./linux/kernel/git/davem/sparc

Pull sparc fixes from David Miller:
"Just some small fixes here and there, and a refcount leak in a serial
  driver, nothing serious"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  serial/sunsu: fix refcount leak
  sparc: Set "ARCH: sunxx" information on the same line
  sparc: vdso: Drop implicit common-page-size linker flag

Merge git://git./linux/kernel/git/davem/net

Pull more networking fixes from David Miller:
"Some more bug fixes have trickled in, we have:

  1) Local MAC entries properly in mscc driver, from Allan W. Nielsen.

  2) Eric Dumazet found some more of the typical "pskb_may_pull() -->
     oops forgot to reload the header pointer" bugs in ipv6 tunnel
     handling.

  3) Bad SKB socket pointer in ipv6 fragmentation handling, from Herbert
     Xu.

  4) Overflow fix in sk_msg_clone(), from Vakul Garg.

  5) Validate address lengths in AF_PACKET, from Willem de Bruijn"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  qmi_wwan: Fix qmap header retrieval in qmimux_rx_fixup
  qmi_wwan: Add support for Fibocom NL678 series
  tls: Do not call sk_memcopy_from_iter with zero length
  ipv6: tunnels: fix two use-after-free
  Prevent overflow of sk_msg in sk_msg_clone()
  packet: validate address length
  net: netxen: fix a missing check and an uninitialized use
  tcp: fix a race in inet_diag_dump_icsk()
  MAINTAINERS: update cxgb4 and cxgb3 maintainer
  ipv6: frags: Fix bogus skb->sk in reassembled packets
  mscc: Configured MAC entries should be locked.

serial/sunsu: fix refcount leak

The function of_find_node_by_path() acquires a reference to the node
returned by it and that reference needs to be dropped by its caller.

su_get_type() doesn't do that. The match node are used as an identifier
to compare against the current node, so we can directly drop the refcount
after getting the node from the path as it is not used as pointer.

Fix this by use a single variable and drop the refcount right after
of_find_node_by_path().

Signed-off-by: Yangtao Li <tiny.windzz@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sparc: Set "ARCH: sunxx" information on the same line

While checking boot log from SPARC qemu, I saw that the "ARCH: sunxx"
information was split on two different line.
This patchs merge both line together.
In the meantime, thoses information need to be printed via pr_info
since printk print them by default via the warning loglevel.

Signed-off-by: Corentin Labbe <clabbe@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sparc: vdso: Drop implicit common-page-size linker flag

GNU linker's -z common-page-size's default value is based on the target
architecture. arch/sparc/vdso/Makefile sets it to the architecture
default, which is implicit and redundant. Drop it.

Link: https://lkml.kernel.org/r/20181206191231.192355-1-ndesaulniers@google.com
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'for-linus' of git://git./virt/kvm/kvm

Pull kvm fix from Paolo Bonzini:
"A simple patch for a pretty bad bug: Unbreak AMD nested
virtualization."

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: nSVM: fix switch to guest mmu

qmi_wwan: Fix qmap header retrieval in qmimux_rx_fixup

This patch fixes qmap header retrieval when modem is configured for
dl data aggregation.

Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'timers-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull timer fix from Ingo Molnar:
"Fix a division by zero crash in the posix-timers code"

* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-timers: Fix division by zero bug

qmi_wwan: Add support for Fibocom NL678 series

Added support for Fibocom NL678 series cellular module QMI interface.
Using QMI_QUIRK_SET_DTR required for Qualcomm MDM9x40 series chipsets.

Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tls: Do not call sk_memcopy_from_iter with zero length

In some conditions e.g. when tls_clone_plaintext_msg() returns -ENOSPC,
the number of bytes to be copied using subsequent function
sk_msg_memcopy_from_iter() becomes zero. This causes function
sk_msg_memcopy_from_iter() to fail which in turn causes tls_sw_sendmsg()
to return failure. To prevent it, do not call sk_msg_memcopy_from_iter()
when number of bytes to copy (indicated by 'try_to_copy') is zero.

Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface")
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'skb_ext-fixes'

Paolo Abeni says:

====================
net: skb extension follow-ups

This series includes some follow-up for the recently added skb extension.
The first patch addresses an unlikely race while adding skb extensions,
and the following two are just minor code clean-up.

v1 -> v2:
- be sure to flag the newly added extension as active in skb_ext_add()
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: minor cleanup in skb_ext_add()

When the extension to be added is already present, the only
skb field we may need to update is 'extensions': we can reorder
the code and avoid a branch.

v1 -> v2:
- be sure to flag the newly added extension as active

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: drop the unused helper skb_ext_get()

Such helper is currently unused, and skb extension users are
better off using skb_ext_add()/skb_ext_del(). So let's drop
it.

Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: fix possible user-after-free in skb_ext_add()

On cow we can free the old extension: we must avoid dereferencing
such extension after skb_ext_maybe_cow(). Since 'new' contents
are always equal to 'old' after the copy, we can fix the above
accessing the relevant data using 'new'.

Fixes: df5042f4c5b9 ("sk_buff: add skb extension infrastructure")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'locking-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull futex fix from Ingo Molnar:
"A single fix for a robust futexes race between sys_exit() and
sys_futex_lock_pi()"

* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Cure exit race

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
"The biggest part is a series of reverts for the macro based GCC
  inlining workarounds. It caused regressions in distro build and other
  kernel tooling environments, and the GCC project was very receptive to
  fixing the underlying inliner weaknesses - so as time ran out we
  decided to do a reasonably straightforward revert of the patches. The
  plan is to rely on the 'asm inline' GCC 9 feature, which might be
  backported to GCC 8 and could thus become reasonably widely available
  on modern distros.

  Other than those reverts, there's misc fixes from all around the
  place.

  I wish our final x86 pull request for v4.20 was smaller..."

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  Revert "kbuild/Makefile: Prepare for using macros in inline assembly code to work around asm() related GCC inlining bugs"
  Revert "x86/objtool: Use asm macros to work around GCC inlining bugs"
  Revert "x86/refcount: Work around GCC inlining bug"
  Revert "x86/alternatives: Macrofy lock prefixes to work around GCC inlining bugs"
  Revert "x86/bug: Macrofy the BUG table section handling, to work around GCC inlining bugs"
  Revert "x86/paravirt: Work around GCC inlining bugs when compiling paravirt ops"
  Revert "x86/extable: Macrofy inline assembly code to work around GCC inlining bugs"
  Revert "x86/cpufeature: Macrofy inline assembly code to work around GCC inlining bugs"
  Revert "x86/jump-labels: Macrofy inline assembly code to work around GCC inlining bugs"
  x86/mtrr: Don't copy uninitialized gentry fields back to userspace
  x86/fsgsbase/64: Fix the base write helper functions
  x86/mm/cpa: Fix cpa_flush_array() TLB invalidation
  x86/vdso: Pass --eh-frame-hdr to the linker
  x86/mm: Fix decoy address handling vs 32-bit builds
  x86/intel_rdt: Ensure a CPU remains online for the region's pseudo-locking sequence
  x86/dump_pagetables: Fix LDT remap address marker
  x86/mm: Fix guard hole handling

ipv6: tunnels: fix two use-after-free

xfrm6_policy_check() might have re-allocated skb->head, we need
to reload ipv6 header pointer.

sysbot reported :

BUG: KASAN: use-after-free in __ipv6_addr_type+0x302/0x32f net/ipv6/addrconf_core.c:40
Read of size 4 at addr ffff888191b8cb70 by task syz-executor2/1304

CPU: 0 PID: 1304 Comm: syz-executor2 Not tainted 4.20.0-rc7+ #356
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x244/0x39d lib/dump_stack.c:113
print_address_description.cold.7+0x9/0x1ff mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.8+0x242/0x309 mm/kasan/report.c:412
__asan_report_load4_noabort+0x14/0x20 mm/kasan/report.c:432
__ipv6_addr_type+0x302/0x32f net/ipv6/addrconf_core.c:40
ipv6_addr_type include/net/ipv6.h:403 [inline]
ip6_tnl_get_cap+0x27/0x190 net/ipv6/ip6_tunnel.c:727
ip6_tnl_rcv_ctl+0xdb/0x2a0 net/ipv6/ip6_tunnel.c:757
vti6_rcv+0x336/0x8f3 net/ipv6/ip6_vti.c:321
xfrm6_ipcomp_rcv+0x1a5/0x3a0 net/ipv6/xfrm6_protocol.c:132
ip6_protocol_deliver_rcu+0x372/0x1940 net/ipv6/ip6_input.c:394
ip6_input_finish+0x84/0x170 net/ipv6/ip6_input.c:434
NF_HOOK include/linux/netfilter.h:289 [inline]
ip6_input+0xe9/0x600 net/ipv6/ip6_input.c:443
IPVS: ftp: loaded support on port[0] = 21
ip6_mc_input+0x514/0x11c0 net/ipv6/ip6_input.c:537
dst_input include/net/dst.h:450 [inline]
ip6_rcv_finish+0x17a/0x330 net/ipv6/ip6_input.c:76
NF_HOOK include/linux/netfilter.h:289 [inline]
ipv6_rcv+0x115/0x640 net/ipv6/ip6_input.c:272
__netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4973
__netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5083
process_backlog+0x24e/0x7a0 net/core/dev.c:5923
napi_poll net/core/dev.c:6346 [inline]
net_rx_action+0x7fa/0x19b0 net/core/dev.c:6412
__do_softirq+0x308/0xb7e kernel/softirq.c:292
do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1027
</IRQ>
do_softirq.part.14+0x126/0x160 kernel/softirq.c:337
do_softirq+0x19/0x20 kernel/softirq.c:340
netif_rx_ni+0x521/0x860 net/core/dev.c:4569
dev_loopback_xmit+0x287/0x8c0 net/core/dev.c:3576
NF_HOOK include/linux/netfilter.h:289 [inline]
ip6_finish_output2+0x193a/0x2930 net/ipv6/ip6_output.c:84
ip6_fragment+0x2b06/0x3850 net/ipv6/ip6_output.c:727
ip6_finish_output+0x6b7/0xc50 net/ipv6/ip6_output.c:152
NF_HOOK_COND include/linux/netfilter.h:278 [inline]
ip6_output+0x232/0x9d0 net/ipv6/ip6_output.c:171
dst_output include/net/dst.h:444 [inline]
ip6_local_out+0xc5/0x1b0 net/ipv6/output_core.c:176
ip6_send_skb+0xbc/0x340 net/ipv6/ip6_output.c:1727
ip6_push_pending_frames+0xc5/0xf0 net/ipv6/ip6_output.c:1747
rawv6_push_pending_frames net/ipv6/raw.c:615 [inline]
rawv6_sendmsg+0x3a3e/0x4b40 net/ipv6/raw.c:945
kobject: 'queues' (0000000089e6eea2): kobject_add_internal: parent: 'tunl0', set: '<NULL>'
kobject: 'queues' (0000000089e6eea2): kobject_uevent_env
inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798
kobject: 'queues' (0000000089e6eea2): kobject_uevent_env: filter function caused the event to drop!
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg+0xd5/0x120 net/socket.c:631
sock_write_iter+0x35e/0x5c0 net/socket.c:900
call_write_iter include/linux/fs.h:1857 [inline]
new_sync_write fs/read_write.c:474 [inline]
__vfs_write+0x6b8/0x9f0 fs/read_write.c:487
kobject: 'rx-0' (00000000e2d902d9): kobject_add_internal: parent: 'queues', set: 'queues'
kobject: 'rx-0' (00000000e2d902d9): kobject_uevent_env
vfs_write+0x1fc/0x560 fs/read_write.c:549
ksys_write+0x101/0x260 fs/read_write.c:598
kobject: 'rx-0' (00000000e2d902d9): fill_kobj_path: path = '/devices/virtual/net/tunl0/queues/rx-0'
__do_sys_write fs/read_write.c:610 [inline]
__se_sys_write fs/read_write.c:607 [inline]
__x64_sys_write+0x73/0xb0 fs/read_write.c:607
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
kobject: 'tx-0' (00000000443b70ac): kobject_add_internal: parent: 'queues', set: 'queues'
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x457669
Code: fd b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 cb b3 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f9bd200bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000457669
RDX: 000000000000058f RSI: 00000000200033c0 RDI: 0000000000000003
kobject: 'tx-0' (00000000443b70ac): kobject_uevent_env
RBP: 000000000072bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f9bd200c6d4
R13: 00000000004c2dcc R14: 00000000004da398 R15: 00000000ffffffff

Allocated by task 1304:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
kasan_kmalloc+0xc7/0xe0 mm/kasan/kasan.c:553
__do_kmalloc_node mm/slab.c:3684 [inline]
__kmalloc_node_track_caller+0x50/0x70 mm/slab.c:3698
__kmalloc_reserve.isra.41+0x41/0xe0 net/core/skbuff.c:140
__alloc_skb+0x155/0x760 net/core/skbuff.c:208
kobject: 'tx-0' (00000000443b70ac): fill_kobj_path: path = '/devices/virtual/net/tunl0/queues/tx-0'
alloc_skb include/linux/skbuff.h:1011 [inline]
__ip6_append_data.isra.49+0x2f1a/0x3f50 net/ipv6/ip6_output.c:1450
ip6_append_data+0x1bc/0x2d0 net/ipv6/ip6_output.c:1619
rawv6_sendmsg+0x15ab/0x4b40 net/ipv6/raw.c:938
inet_sendmsg+0x1a1/0x690 net/ipv4/af_inet.c:798
sock_sendmsg_nosec net/socket.c:621 [inline]
sock_sendmsg+0xd5/0x120 net/socket.c:631
___sys_sendmsg+0x7fd/0x930 net/socket.c:2116
__sys_sendmsg+0x11d/0x280 net/socket.c:2154
__do_sys_sendmsg net/socket.c:2163 [inline]
__se_sys_sendmsg net/socket.c:2161 [inline]
__x64_sys_sendmsg+0x78/0xb0 net/socket.c:2161
do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
kobject: 'gre0' (00000000cb1b2d7b): kobject_add_internal: parent: 'net', set: 'devices'

Freed by task 1304:
save_stack+0x43/0xd0 mm/kasan/kasan.c:448
set_track mm/kasan/kasan.c:460 [inline]
__kasan_slab_free+0x102/0x150 mm/kasan/kasan.c:521
kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:528
__cache_free mm/slab.c:3498 [inline]
kfree+0xcf/0x230 mm/slab.c:3817
skb_free_head+0x93/0xb0 net/core/skbuff.c:553
pskb_expand_head+0x3b2/0x10d0 net/core/skbuff.c:1498
__pskb_pull_tail+0x156/0x18a0 net/core/skbuff.c:1896
pskb_may_pull include/linux/skbuff.h:2188 [inline]
_decode_session6+0xd11/0x14d0 net/ipv6/xfrm6_policy.c:150
__xfrm_decode_session+0x71/0x140 net/xfrm/xfrm_policy.c:3272
kobject: 'gre0' (00000000cb1b2d7b): kobject_uevent_env
__xfrm_policy_check+0x380/0x2c40 net/xfrm/xfrm_policy.c:3322
__xfrm_policy_check2 include/net/xfrm.h:1170 [inline]
xfrm_policy_check include/net/xfrm.h:1175 [inline]
xfrm6_policy_check include/net/xfrm.h:1185 [inline]
vti6_rcv+0x4bd/0x8f3 net/ipv6/ip6_vti.c:316
xfrm6_ipcomp_rcv+0x1a5/0x3a0 net/ipv6/xfrm6_protocol.c:132
ip6_protocol_deliver_rcu+0x372/0x1940 net/ipv6/ip6_input.c:394
ip6_input_finish+0x84/0x170 net/ipv6/ip6_input.c:434
NF_HOOK include/linux/netfilter.h:289 [inline]
ip6_input+0xe9/0x600 net/ipv6/ip6_input.c:443
ip6_mc_input+0x514/0x11c0 net/ipv6/ip6_input.c:537
dst_input include/net/dst.h:450 [inline]
ip6_rcv_finish+0x17a/0x330 net/ipv6/ip6_input.c:76
NF_HOOK include/linux/netfilter.h:289 [inline]
ipv6_rcv+0x115/0x640 net/ipv6/ip6_input.c:272
__netif_receive_skb_one_core+0x14d/0x200 net/core/dev.c:4973
__netif_receive_skb+0x2c/0x1e0 net/core/dev.c:5083
process_backlog+0x24e/0x7a0 net/core/dev.c:5923
kobject: 'gre0' (00000000cb1b2d7b): fill_kobj_path: path = '/devices/virtual/net/gre0'
napi_poll net/core/dev.c:6346 [inline]
net_rx_action+0x7fa/0x19b0 net/core/dev.c:6412
__do_softirq+0x308/0xb7e kernel/softirq.c:292

The buggy address belongs to the object at ffff888191b8cac0
which belongs to the cache kmalloc-512 of size 512
The buggy address is located 176 bytes inside of
512-byte region [ffff888191b8cac0, ffff888191b8ccc0)
The buggy address belongs to the page:
page:ffffea000646e300 count:1 mapcount:0 mapping:ffff8881da800940 index:0x0
flags: 0x2fffc0000000200(slab)
raw: 02fffc0000000200 ffffea0006eaaa48 ffffea00065356c8 ffff8881da800940
raw: 0000000000000000 ffff888191b8c0c0 0000000100000006 0000000000000000
page dumped because: kasan: bad access detected
kobject: 'queues' (000000005fd6226e): kobject_add_internal: parent: 'gre0', set: '<NULL>'

Memory state around the buggy address:
ffff888191b8ca00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
ffff888191b8ca80: fc fc fc fc fc fc fc fc fb fb fb fb fb fb fb fb
>ffff888191b8cb00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888191b8cb80: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888191b8cc00: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb

Fixes: 0d3c703a9d17 ("ipv6: Cleanup IPv6 tunnel receive path")
Fixes: ed1efb2aefbb ("ipv6: Add support for IPsec virtual tunnel interfaces")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'drm-fixes-2018-12-21' of git://anongit.freedesktop.org/drm/drm

Pull final drm fix from Daniel Vetter:
"Very calm week, so either everything perfect or everyone on holidays
already. Just one array_index_nospec patch, also for stable"

* tag 'drm-fixes-2018-12-21' of git://anongit.freedesktop.org/drm/drm:
drm/ioctl: Fix Spectre v1 vulnerabilities

Prevent overflow of sk_msg in sk_msg_clone()

Fixed function sk_msg_clone() to prevent overflow of 'dst' while adding
pages in scatterlist entries. The overflow of 'dst' causes crash in kernel
tls module while doing record encryption.

Crash fixed by this patch.

[   78.796119] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
[   78.804900] Mem abort info:
[   78.807683]   ESR = 0x96000004
[   78.810744]   Exception class = DABT (current EL), IL = 32 bits
[   78.816677]   SET = 0, FnV = 0
[   78.819727]   EA = 0, S1PTW = 0
[   78.822873] Data abort info:
[   78.825759]   ISV = 0, ISS = 0x00000004
[   78.829600]   CM = 0, WnR = 0
[   78.832576] user pgtable: 4k pages, 48-bit VAs, pgdp = 00000000bf8ee311
[   78.839195] [0000000000000008] pgd=0000000000000000
[   78.844081] Internal error: Oops: 96000004 [#1] PREEMPT SMP
[   78.849642] Modules linked in: tls xt_conntrack ipt_REJECT nf_reject_ipv4 ip6table_filter ip6_tables xt_CHECKSUM cpve cpufreq_conservative lm90 ina2xx crct10dif_ce
[   78.865377] CPU: 0 PID: 6007 Comm: openssl Not tainted 4.20.0-rc6-01647-g754d5da63145-dirty #107
[   78.874149] Hardware name: LS1043A RDB Board (DT)
[   78.878844] pstate: 60000005 (nZCv daif -PAN -UAO)
[   78.883632] pc : scatterwalk_copychunks+0x164/0x1c8
[   78.888500] lr : scatterwalk_copychunks+0x160/0x1c8
[   78.893366] sp : ffff00001d04b600
[   78.896668] x29: ffff00001d04b600 x28: ffff80006814c680
[   78.901970] x27: 0000000000000000 x26: ffff80006c8de786
[   78.907272] x25: ffff00001d04b760 x24: 000000000000001a
[   78.912573] x23: 0000000000000006 x22: ffff80006814e440
[   78.917874] x21: 0000000000000100 x20: 0000000000000000
[   78.923175] x19: 000081ffffffffff x18: 0000000000000400
[   78.928476] x17: 0000000000000008 x16: 0000000000000000
[   78.933778] x15: 0000000000000100 x14: 0000000000000001
[   78.939079] x13: 0000000000001080 x12: 0000000000000020
[   78.944381] x11: 0000000000001080 x10: 00000000ffff0002
[   78.949683] x9 : ffff80006814c248 x8 : 00000000ffff0000
[   78.954985] x7 : ffff80006814c318 x6 : ffff80006c8de786
[   78.960286] x5 : 0000000000000f80 x4 : ffff80006c8de000
[   78.965588] x3 : 0000000000000000 x2 : 0000000000001086
[   78.970889] x1 : ffff7e0001b74e02 x0 : 0000000000000000
[   78.976192] Process openssl (pid: 6007, stack limit = 0x00000000291367f9)
[   78.982968] Call trace:
[   78.985406]  scatterwalk_copychunks+0x164/0x1c8
[   78.989927]  skcipher_walk_next+0x28c/0x448
[   78.994099]  skcipher_walk_done+0xfc/0x258
[   78.998187]  gcm_encrypt+0x434/0x4c0
[   79.001758]  tls_push_record+0x354/0xa58 [tls]
[   79.006194]  bpf_exec_tx_verdict+0x1e4/0x3e8 [tls]
[   79.010978]  tls_sw_sendmsg+0x650/0x780 [tls]
[   79.015326]  inet_sendmsg+0x2c/0xf8
[   79.018806]  sock_sendmsg+0x18/0x30
[   79.022284]  __sys_sendto+0x104/0x138
[   79.025935]  __arm64_sys_sendto+0x24/0x30
[   79.029936]  el0_svc_common+0x60/0xe8
[   79.033588]  el0_svc_handler+0x2c/0x80
[   79.037327]  el0_svc+0x8/0xc
[   79.040200] Code: 6b01005f 54fff788 940169b1 f9000320 (b9400801)
[   79.046283] ---[ end trace 74db007d069c1cf7 ]---

Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface")
Signed-off-by: Vakul Garg <vakul.garg@nxp.com>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

packet: validate address length

Packet sockets with SOCK_DGRAM may pass an address for use in
dev_hard_header. Ensure that it is of sufficient length.

Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

Pull input fixes from Dmitry Torokhov:
"Switching a few devices with Synaptics over to SMbus and disabling
  SMbus on a couple devices with Elan touchpads as they need more
  plumbing on PS/2 side"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: synaptics - enable SMBus for HP EliteBook 840 G4
  Input: elantech - disable elan-i2c for P52 and P72
  Input: synaptics - enable RMI on ThinkPad T560
  Input: omap-keypad - fix idle configuration to not block SoC idle states

Merge tag 'gpio-v4.20-3' of git://git./linux/kernel/git/linusw/linux-gpio

Pull GPIO fixes from Linus Walleij:
"Hopefully last round of GPIO fixes.

  The ACPI patch is pretty important for some laptop users, the rest is
  driver-specific for embedded (mostly ARM) systems.

  I took out one ACPI patch that wasn't critical enough because I
  couldn't justify sending it at this point, and that is why the commit
  date is today, but the patches have been in linux-next.

  Sorry for not sending some of them earlier :(

  Notice that we have a co-maintainer for GPIO now, Bartosz Golaszewski,
  and he might jump in and make some pull requests at times when I am
  off.

  Summary:

   - ACPI IRQ request deferral

   - OMAP: revert deferred wakeup quirk

   - MAX7301: fix DMA safe memory handling

   - MVEBU: selective probe failure on missing clk"

* tag 'gpio-v4.20-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
  gpio: mvebu: only fail on missing clk if pwm is actually to be used
  gpio: max7301: fix driver for use with CONFIG_VMAP_STACK
  gpio: gpio-omap: Revert deferred wakeup quirk handling for regressions
  gpiolib-acpi: Only defer request_irq for GpioInt ACPI event handlers

net: netxen: fix a missing check and an uninitialized use

When netxen_rom_fast_read() fails, "bios" is left uninitialized and may
contain random value, thus should not be used.

The fix ensures that if netxen_rom_fast_read() fails, we return "-EIO".

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

bpf: fix segfault in test_verifier selftest

Minor fallout from merge resolution, test_verifier was segfaulting
because the REJECT result was correct, but errstr was NULL. Properly
fix it as in 339bbff2d6e0.

Fixes: 339bbff2d6e0 ("Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next")
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag '4.20-rc7-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull smb3 fix from Steve French:
"An important smb3 fix for an regression to some servers introduced by
  compounding optimization to rmdir.

  This fix has been tested by multiple developers (including me) with
  the usual private xfstesting, but also by the new cifs/smb3 "buildbot"
  xfstest VMs (thank you Ronnie and Aurelien for good work on this
  automation). The automated testing has been updated so that it will
  catch problems like this in the future.

  Note that Pavel discovered (very recently) some unrelated but
  extremely important bugs in credit handling (smb3 flow control problem
  that can lead to disconnects/reconnects) when compounding, that I
  would have liked to send in ASAP but the complete testing of those two
  fixes may not be done in time and have to wait for 4.21"

* tag '4.20-rc7-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb3: Fix rmdir compounding regression to strict servers

Merge tag 'mlx5-XDP-100Mpps' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-XDP-100Mpps

This series from Tariq, mainly adds the support of mlx5 Multi Packet WQE
(TX descriptor) - ConnectX-5 and above - for XDP TX, which allows us to
overcome the 70Mpps PCIe bottleneck of conventional TX queues (single TX
descriptor per packet), and achieve the 100Mpps milestone with the MPWQE
approach.

In the first five patches, Tariq did minor improvements to mlx5 tx path,
for better debug-ability and code structuring.

Next two patches lay down the foundation for MPWQE implementation to store
the in-flight XDP TX information for multiple packets of one descriptor
(WQE).

Next: Support Enhanced Multi-Packet TX WQE for XDP

In this patch we add support for the HW feature, which is supported
starting from ConnectX-5.

Performance:
Tested packet rate for UDP 64Byte multi-stream over ConnectX-5 NICs.
CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz

XDP_TX:
We see a huge gain on single port ConnectX-5, and reach the 100 Mpps
milestone.
* Single-port HCA:
Before:   70 Mpps
After:   100 Mpps (+42.8%)

* Dual-port HCA:
Before: 51.7 Mpps
After:  57.3 Mpps (+10.8%)

* In both cases we tested traffic on one port and for now On Dual-port
  HCAs we see only a small gain, we are working to overcome this
  bottleneck, but for the moment only with experimental firmware on dual
  port HCAs we can reach the wanted numbers as seen on Single-port HCAs.

XDP_REDIRECT:
Redirect from (A) ConnectX-5 to (B) ConnectX-5.
Due to a setup limitation, (A) and (B) are on different NUMA nodes,
so absolute performance numbers are not optimal.
- Note:
  Below is the transmit rate of (B), not the redirect rate of (A)
  which is in some cases higher.

* (B) is single-port:
Before:   77 Mpps
After:    90 Mpps (+16.8%)

* (B) is dual-port:
Before:  61 Mpps
After:   72 Mpps (+18%)

Last patch adds a knob in mlx5 ethtool private flag to turn on/off
XDP TX MPWQE.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Input: synaptics - enable SMBus for HP EliteBook 840 G4

dmesg reports that "Your touchpad (PNP: SYN3052 SYN0100 SYN0002 PNP0f13)
says it can support a different bus."

I've tested the offered psmouse.synaptics_intertouch=1 with 4.18.x and
4.19.x and it seems to work well. No problems seen with suspend/resume.

Also, it appears that RMI/SMBus mode is actually required for 3-4 finger
multitouch gestures to work -- otherwise they are not reported at all.

Information from dmesg in both modes:

  psmouse serio3: synaptics: Touchpad model: 1, fw: 8.2, id: 0x1e2b1,
      caps: 0xf00123/0x840300/0x2e800/0x0, board id: 3139, fw id: 2000742

  psmouse serio3: synaptics: Trying to set up SMBus access
  rmi4_smbus 6-002c: registering SMbus-connected sensor
  rmi4_f01 rmi4-00.fn01: found RMI device,
      manufacturer: Synaptics, product: TM3139-001, fw id: 2000742

Signed-off-by: Mantas Mikulėnas <grawity@gmail.com>
Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

Input: elantech - disable elan-i2c for P52 and P72

The current implementation of elan_i2c is known to not support those
2 laptops.

A proper fix is to tweak both elantech and elan_i2c to transmit the
correct information from PS/2, which would make a bad candidate for
stable.

So to give us some time for fixing the root of the problem, disable
elan_i2c for the devices we know are not behaving properly.

Link: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1803600
Link: https://bugs.archlinux.org/task/59714
Fixes: df077237cf55 Input: elantech - detect new ICs and setup Host Notify for them

Cc: stable@vger.kernel.org # v4.18+
Signed-off-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>

gpio: mvebu: only fail on missing clk if pwm is actually to be used

The gpio IP on Armada 370 at offset 0x18180 has neither a clk nor pwm
registers. So there is no need for a clk as the pwm isn't used anyhow.
So only check for the clk in the presence of the pwm registers. This fixes
a failure to probe the gpio driver for the above mentioned gpio device.

Fixes: 757642f9a584 ("gpio: mvebu: Add limited PWM support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio: max7301: fix driver for use with CONFIG_VMAP_STACK

spi_read() and spi_write() require DMA-safe memory. When
CONFIG_VMAP_STACK is selected, those functions cannot be used
with buffers on stack.

This patch replaces calls to spi_read() and spi_write() by
spi_write_then_read() which doesn't require DMA-safe buffers.

Fixes: 0c36ec314735 ("gpio: gpio driver for max7301 SPI GPIO expander")
Cc: <stable@vger.kernel.org>
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

gpio: gpio-omap: Revert deferred wakeup quirk handling for regressions

Commit ec0daae685b2 ("gpio: omap: Add level wakeup handling for omap4
based SoCs") attempted to fix omap4 GPIO wakeup handling as it was
blocking deeper SoC idle states. However this caused a regression for
GPIOs during runtime having over second long latencies for Ethernet
GPIO interrupt as reportedy by Russell King <rmk+kernel@armlinux.org.uk>.

Let's fix this issue by doing a partial revert of the breaking commit.
We still want to keep the quirk handling around as it is also used for
OMAP_GPIO_QUIRK_IDLE_REMOVE_TRIGGER.

The real fix for omap4 GPIO wakeup handling involves fixes for
omap_set_gpio_trigger() and omap_gpio_unmask_irq() and will be posted
separately. And we must keep the wakeup bit enabled during runtime
because of module doing clock autogating with autoidle configured.

Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Fixes: ec0daae685b2 ("gpio: omap: Add level wakeup handling for omap4
based SoCs")
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Keerthy <j-keerthy@ti.com>
Cc: Ladislav Michl <ladis@linux-mips.org>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

net/mlx5e: XDP, Add user control for XDP TX MPWQE feature

Add ethtool private flag 'xdp_tx_mpwqe' to control the feature
from userspace.
Feature is set ON by default, if supported.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: XDP, Support Enhanced Multi-Packet TX WQE

Add support for the HW feature of multi-packet WQE in XDP
xmit flow.

The conventional TX descriptor (WQE, Work Queue Element) serves
a single packet. Our HW has support for multi-packet WQE (MPWQE)
in which a single descriptor serves multiple TX packets.

This reduces both the PCI overhead and the CPU cycles wasted on
writing them.

In this patch we add support for the HW feature, which is supported
starting from ConnectX-5.

Performance:
Tested packet rate for UDP 64Byte multi-stream over ConnectX-5 NICs.
CPU: Intel(R) Xeon(R) CPU E5-2680 v3 @ 2.50GHz

XDP_TX:
We see a huge gain on single port ConnectX-5, and reach the 100 Mpps
milestone.
* Single-port HCA:
Before:   70 Mpps
After:   100 Mpps (+42.8%)

* Dual-port HCA:
Before: 51.7 Mpps
After:  57.3 Mpps (+10.8%)

* In both cases we tested traffic on one port and for now On Dual-port HCAs
  we see only small gain, we are working to overcome this bottleneck, but
  for the moment only with experimental firmware on dual port HCAs we can
  reach the wanted numbers as seen on Single-port HCAs.

XDP_REDIRECT:
Redirect from (A) ConnectX-5 to (B) ConnectX-5.
Due to a setup limitation, (A) and (B) are on different NUMA nodes,
so absolute performance numbers are not optimal.
Note:
  Below is the transmit rate of (B), not the redirect rate of (A)
  which is in some cases higher.

* (B) is single-port:
Before:   77 Mpps
After:    90 Mpps (+16.8%)

* (B) is dual-port:
Before:  61 Mpps
After:   72 Mpps (+18%)

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: XDP, Add array for WQE info descriptors

Each xdp_wqe_info instance describes the number of data-segments
and WQEBBs of the WQE.
This is useful for a downstream patch that adds support for
Multi-Packet TX WQE feature.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: XDP, Maintain a FIFO structure for xdp_info instances

This provides infrastructure to have multiple xdp_info instances
for the same consumer index.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: XDP, Replace boolean doorbell indication with segment pointer

Instead of calculating the control segment to be used upon an
XDP xmit doorbell, save it in SQ structure.
Nullify when no pending doorbell.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: XDP, Warn upon polling an error CQE

Do not ignore the CQE opcode.
This helps expose issues and debug them.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: XDP, Change the XDP SQ redirect indication

Do not maintain an SQ state bit to indicate whether an
XDP SQ serves redirect operations.

Instead, rely on the fact that such an XDP SQ doesn't reside
in an RQ instance, while the others do.
This info is not known to the XDP SQ functions themselves,
and they rely on their callers to distinguish between the cases.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: XDP, Precede XDP-related operations in RQ poll by a loaded program check

At the end of the RQ polling loop, some XDP-related operations
might be required. Before checking them one by one, check if
an XDP program is even loaded.
Combine all the checks and operations in a single function in xdp files.

This saves unnecessary checks for non-XDP flows.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5e: TX, Print opcode in error CQE warning

The opcode indicates about the error reason.
Printing it helps in debug.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

selftests: net: reuseport_addr_any: silence clang warning

Clang does not recognize that calls to error() terminate execution
and complains about uninitialized variable use that happens after calls
to error(). This noop patchset fixes this.

Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: fix a race in inet_diag_dump_icsk()

Alexei reported use after frees in inet_diag_dump_icsk() [1]

Because we use refcount_set() when various sockets are setup and
inserted into ehash, we also need to make sure inet_diag_dump_icsk()
wont race with the refcount_set() operations.

Jonathan Lemon sent a patch changing net_twsk_hashdance() but
other spots would need risky changes.

Instead, fix inet_diag_dump_icsk() as this bug came with
linux-4.10 only.

[1] Quoting Alexei :

First something iterating over sockets finds already freed tw socket:

refcount_t: increment on 0; use-after-free.
WARNING: CPU: 2 PID: 2738 at lib/refcount.c:153 refcount_inc+0x26/0x30
RIP: 0010:refcount_inc+0x26/0x30
RSP: 0018:ffffc90004c8fbc0 EFLAGS: 00010282
RAX: 000000000000002b RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88085ee9d680 RSI: ffff88085ee954c8 RDI: ffff88085ee954c8
RBP: ffff88010ecbd2c0 R08: 0000000000000000 R09: 000000000000174c
R10: ffffffff81e7c5a0 R11: 0000000000000000 R12: 0000000000000000
R13: ffff8806ba9bf210 R14: ffffffff82304600 R15: ffff88010ecbd328
FS:  00007f81f5a7d700(0000) GS:ffff88085ee80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f81e2a95000 CR3: 000000069b2eb006 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
inet_diag_dump_icsk+0x2b3/0x4e0 [inet_diag]  // sock_hold(sk); in net/ipv4/inet_diag.c:1002
? kmalloc_large_node+0x37/0x70
? __kmalloc_node_track_caller+0x1cb/0x260
? __alloc_skb+0x72/0x1b0
? __kmalloc_reserve.isra.40+0x2e/0x80
__inet_diag_dump+0x3b/0x80 [inet_diag]
netlink_dump+0x116/0x2a0
netlink_recvmsg+0x205/0x3c0
sock_read_iter+0x89/0xd0
__vfs_read+0xf7/0x140
vfs_read+0x8a/0x140
SyS_read+0x3f/0xa0
do_syscall_64+0x5a/0x100

then a minute later twsk timer fires and hits two bad refcnts
for this freed socket:

refcount_t: decrement hit 0; leaking memory.
WARNING: CPU: 31 PID: 0 at lib/refcount.c:228 refcount_dec+0x2e/0x40
Modules linked in:
RIP: 0010:refcount_dec+0x2e/0x40
RSP: 0018:ffff88085f5c3ea8 EFLAGS: 00010296
RAX: 000000000000002c RBX: ffff88010ecbd2c0 RCX: 000000000000083f
RDX: 0000000000000000 RSI: 00000000000000f6 RDI: 000000000000003f
RBP: ffffc90003c77280 R08: 0000000000000000 R09: 00000000000017d3
R10: ffffffff81e7c5a0 R11: 0000000000000000 R12: ffffffff82ad2d80
R13: ffffffff8182de00 R14: ffff88085f5c3ef8 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff88085f5c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fbe42685250 CR3: 0000000002209001 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
inet_twsk_kill+0x9d/0xc0  // inet_twsk_bind_unhash(tw, hashinfo);
call_timer_fn+0x29/0x110
run_timer_softirq+0x36b/0x3a0

refcount_t: underflow; use-after-free.
WARNING: CPU: 31 PID: 0 at lib/refcount.c:187 refcount_sub_and_test+0x46/0x50
RIP: 0010:refcount_sub_and_test+0x46/0x50
RSP: 0018:ffff88085f5c3eb8 EFLAGS: 00010296
RAX: 0000000000000026 RBX: ffff88010ecbd2c0 RCX: 000000000000083f
RDX: 0000000000000000 RSI: 00000000000000f6 RDI: 000000000000003f
RBP: ffff88010ecbd358 R08: 0000000000000000 R09: 000000000000185b
R10: ffffffff81e7c5a0 R11: 0000000000000000 R12: ffff88010ecbd358
R13: ffffffff8182de00 R14: ffff88085f5c3ef8 R15: 0000000000000000
FS:  0000000000000000(0000) GS:ffff88085f5c0000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007fbe42685250 CR3: 0000000002209001 CR4: 00000000003606e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
inet_twsk_put+0x12/0x20  // inet_twsk_put(tw);
call_timer_fn+0x29/0x110
run_timer_softirq+0x36b/0x3a0

Fixes: 67db3e4bfbc9 ("tcp: no longer hold ehash lock while calling tcp_get_info()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Alexei Starovoitov <ast@kernel.org>
Cc: Jonathan Lemon <jonathan.lemon@gmail.com>
Acked-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

virtio-net: ethtool configurable LRO

Virtio-net devices negotiate LRO support with the host.
Display the initially negotiated state with ethtool -k.

Also allow configuring it with ethtool -K, reusing the existing
virtnet_set_guest_offloads helper that configures LRO for XDP.
This is conditional on VIRTIO_NET_F_CTRL_GUEST_OFFLOADS.

Virtio-net negotiates TSO4 and TSO6 separately, but ethtool does not
distinguish between the two. Display LRO as on only if any offload
is active.

RTNL is held while calling virtnet_set_features, same as on the path
from virtnet_xdp_set.

Changes v1 -> v2
  - allow ethtool config (-K) only if VIRTIO_NET_F_CTRL_GUEST_OFFLOADS
  - show LRO as enabled if any LRO variant is enabled
  - do not allow configuration while XDP is active
  - differentiate current features from the capable set, to restore
    on XDP down only those features that were active on XDP up
  - move test out of VIRTIO_NET_F_CSUM/TSO branch, which is tx only

Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./linux/kernel/git/pablo/nf-next

Pablo Neira Ayuso says:

====================
Netfilter updates for net-next

The following patchset contains Netfilter updates for net-next:

1) Support for destination MAC in ipset, from Stefano Brivio.

2) Disallow all-zeroes MAC address in ipset, also from Stefano.

3) Add IPSET_CMD_GET_BYNAME and IPSET_CMD_GET_BYINDEX commands,
   introduce protocol version number 7, from Jozsef Kadlecsik.
   A follow up patch to fix ip_set_byindex() is also included
   in this batch.

4) Honor CTA_MARK_MASK from ctnetlink, from Andreas Jaggi.

5) Statify nf_flow_table_iterate(), from Taehee Yoo.

6) Use nf_flow_table_iterate() to simplify garbage collection in
   nf_flow_table logic, also from Taehee Yoo.

7) Don't use _bh variants of call_rcu(), rcu_barrier() and
   synchronize_rcu_bh() in Netfilter, from Paul E. McKenney.

8) Remove NFC_* cache definition from the old caching
   infrastructure.

9) Remove layer 4 port rover in NAT helpers, use random port
   instead, from Florian Westphal.

10) Use strscpy() in ipset, from Qian Cai.

11) Remove NF_NAT_RANGE_PROTO_RANDOM_FULLY branch now that
    random port is allocated by default, from Xiaozhou Liu.

12) Ignore NF_NAT_RANGE_PROTO_RANDOM too, from Florian Westphal.

13) Limit port allocation selection routine in NAT to avoid
    softlockup splats when most ports are in use, from Florian.

14) Remove unused parameters in nf_ct_l4proto_unregister_sysctl()
    from Yafang Shao.

15) Direct call to nf_nat_l4proto_unique_tuple() instead of
    indirection, from Florian Westphal.

16) Several patches to remove all layer 4 NAT indirections,
    remove nf_nat_l4proto struct, from Florian Westphal.

17) Fix RTP/RTCP source port translation when SNAT is in place,
    from Alin Nastac.

18) Selective rule dump per chain, from Phil Sutter.

19) Revisit CLUSTERIP target, this includes a deadlock fix from
    netns path, sleep in atomic, remove bogus WARN_ON_ONCE()
    and disallow mismatching IP address and MAC address.
    Patchset from Taehee Yoo.

20) Update UDP timeout to stream after 2 seconds, from Florian.

21) Shrink UDP established timeout to 120 seconds like TCP timewait.

22) Sysctl knobs to set GRE timeouts, from Yafang Shao.

23) Move seq_print_acct() to conntrack core file, from Florian.

24) Add enum for conntrack sysctl knobs, also from Florian.

25) Place nf_conntrack_acct, nf_conntrack_helper, nf_conntrack_events
    and nf_conntrack_timestamp knobs in the core, from Florian Westphal.
    As a side effect, shrink netns_ct structure by removing obsolete
    sysctl anchors, also from Florian.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./linux/kernel/git/bpf/bpf-next

Daniel Borkmann says:

====================
pull-request: bpf-next 2018-12-21

The following pull-request contains BPF updates for your *net-next* tree.

There is a merge conflict in test_verifier.c. Result looks as follows:

        [...]
        },
        {
                "calls: cross frame pruning",
                .insns = {
                [...]
                .prog_type = BPF_PROG_TYPE_SOCKET_FILTER,
                .errstr_unpriv = "function calls to other bpf functions are allowed for root only",
                .result_unpriv = REJECT,
                .errstr = "!read_ok",
                .result = REJECT,
},
        {
                "jset: functional",
                .insns = {
        [...]
        {
                "jset: unknown const compare not taken",
                .insns = {
                        BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
                                     BPF_FUNC_get_prandom_u32),
                        BPF_JMP_IMM(BPF_JSET, BPF_REG_0, 1, 1),
                        BPF_LDX_MEM(BPF_B, BPF_REG_8, BPF_REG_9, 0),
                        BPF_EXIT_INSN(),
                },
                .prog_type = BPF_PROG_TYPE_SOCKET_FILTER,
                .errstr_unpriv = "!read_ok",
                .result_unpriv = REJECT,
                .errstr = "!read_ok",
                .result = REJECT,
        },
        [...]
        {
                "jset: range",
                .insns = {
                [...]
                },
                .prog_type = BPF_PROG_TYPE_SOCKET_FILTER,
                .result_unpriv = ACCEPT,
                .result = ACCEPT,
        },

The main changes are:

1) Various BTF related improvements in order to get line info
   working. Meaning, verifier will now annotate the corresponding
   BPF C code to the error log, from Martin and Yonghong.

2) Implement support for raw BPF tracepoints in modules, from Matt.

3) Add several improvements to verifier state logic, namely speeding
   up stacksafe check, optimizations for stack state equivalence
   test and safety checks for liveness analysis, from Alexei.

4) Teach verifier to make use of BPF_JSET instruction, add several
   test cases to kselftests and remove nfp specific JSET optimization
   now that verifier has awareness, from Jakub.

5) Improve BPF verifier's slot_type marking logic in order to
   allow more stack slot sharing, from Jiong.

6) Add sk_msg->size member for context access and add set of fixes
   and improvements to make sock_map with kTLS usable with openssl
   based applications, from John.

7) Several cleanups and documentation updates in bpftool as well as
   auto-mount of tracefs for "bpftool prog tracelog" command,
   from Quentin.

8) Include sub-program tags from now on in bpf_prog_info in order to
   have a reliable way for user space to get all tags of the program
   e.g. needed for kallsyms correlation, from Song.

9) Add BTF annotations for cgroup_local_storage BPF maps and
   implement bpf fs pretty print support, from Roman.

10) Fix bpftool in order to allow for cross-compilation, from Ivan.

11) Update of bpftool license to GPLv2-only + BSD-2-Clause in order
    to be compatible with libbfd and allow for Debian packaging,
    from Jakub.

12) Remove an obsolete prog->aux sanitation in dump and get rid of
    version check for prog load, from Daniel.

13) Fix a memory leak in libbpf's line info handling, from Prashant.

14) Fix cpumap's frame alignment for build_skb() so that skb_shared_info
    does not get unaligned, from Jesper.

15) Fix test_progs kselftest to work with older compilers which are less
    smart in optimizing (and thus throwing build error), from Stanislav.

16) Cleanup and simplify AF_XDP socket teardown, from Björn.

17) Fix sk lookup in BPF kselftest's test_sock_addr with regards
    to netns_id argument, from Andrey.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'expand-txtimestamp-selftest'

Willem de Bruijn says:

====================
expand txtimestamp selftest

Convert the existing txtimestamp test to run as part of kselftest
and return a pass/fail.

Also expand the variations of timestamping tested, including packet
sockets, ipv6 raw and dgram and passing options using cmsg.

These are enough changes to split across a few patches, even if all
changes are only this one test.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: add txtimestamp kselftest

Run the transmit timestamp tests as part of kselftests.

Add a txtimestamp.sh test script that runs most variants:
ipv4/ipv6, tcp/udp/raw/raw_ipproto/pf_packet, data/nodata,
setsockopt/cmsg. The script runs tests with netem delays.

Refine txtimestamp.c to validate results. Take expected
netem delays as input and compare against real timestamps.

To run without dependencies, add a listener socket to be
able to connect in the case of TCP.

Add the timestamping directory to the kselftests Makefile.
Build all the binaries. Only run verified txtimestamp.sh.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: expand txtimestamp with ipv6 dgram + raw and pf_packet

Expand the transmit timestamp regression test with support for
missing protocols: ipv6 datagram and raw and pf_packet.

Also refine resolve_hostname to independently request AF_INET or
AF_INET6 addresses. Else, ipv4 addresses may be returned as AF_INET6.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: expand txtimestamp with cmsg support

Commit 3dd17e63f513 ("sock: accept SO_TIMESTAMPING flags in socket
cmsg") added support for passing tx timestamping options per-call
in sendmsg.

Expand the txtimestamp test with support for this feature.

Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Soheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: seg6.h: remove an unused #include

A minor code cleanup.

Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ppp: Move PFC decompression to PPP generic layer

Extract "Protocol" field decompression code from transport protocols to
PPP generic layer, where it actually belongs. As a consequence, this
patch fixes incorrect place of PFC decompression in L2TP driver (when
it's not PPPOX_BOUND) and also enables this decompression for other
protocols, like PPPoE.

Protocol field decompression also happens in PPP Multilink Protocol
code and in PPP compression protocols implementations (bsd, deflate,
mppe). It looks like there is no easy way to get rid of that, so it was
decided to leave it as is, but provide those cases with appropriate
comments instead.

Changes in v2:
  - Fix the order of checking skb data room and proto decompression
  - Remove "inline" keyword from ppp_decompress_proto()
  - Don't split line before function name
  - Prefix ppp_decompress_proto() function with "__"
  - Add ppp_decompress_proto() function with skb data room checks
  - Add description for introduced functions
  - Fix comments (as per review on mailing list)

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reviewed-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-next-for-davem-2018-12-20' of git://git./linux/kernel/git/kvalo/wireless-drivers-next

Kalle Valo says:

====================
wireless-drivers-next patches for 4.21

Last set of patches for 4.21. mt76 is still in very active development
and having some refactoring as well as new features. But also other
drivers got few new features and fixes.

Major changes:

ath10k

* add amsdu support for QCA6174 monitor mode

* report tx rate using the new ieee80211_tx_rate_update() API

* wcn3990 support is not experimental anymore

iwlwifi

* support for FW version 43 for 9000 and 22000 series

brcmfmac

* add support for CYW43012 SDIO chipset

* add the raw 4354 PCIe device ID for unprogrammed Cypress boards

mwifiex

* add NL80211_STA_INFO_RX_BITRATE support

mt76

* use the same firmware for mt76x2e and mt76x2u

* mt76x0e survey support

* more unification between mt76x2 and mt76x0

* mt76x0e AP mode support

* mt76x0e DFS support

* rework and fix tx status handling for mt76x0 and mt76x2
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

linux/netlink.h: drop unnecessary extern prefix

Don't need extern prefix before function prototypes.
Checkpatch has complained about this for a couple of years.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ipv4-Prevent-user-triggerable-warning'

Ido Schimmel says:

====================
net: ipv4: Prevent user triggerable warning

Patch #1 prevents a user triaggerable warning in the flow dissector by
setting 'skb->dev' in skbs used for IPv4 output route get requests.

Patch #2 adds a test case that triggers the warning without the first
patch.

I have audited all the RTM_GETROUTE handlers and could not find any
other callpath where an skb is passed to the flow dissector with both
'skb->dev' and 'skb->sk' cleared.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: rtnetlink: Add a test case for multipath route get

Without previous patch a warning would be generated upon multipath route
get when FIB multipath hash policy is to use a 5-tuple for multipath
hash calculation.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ipv4: Set skb->dev for output route resolution

When user requests to resolve an output route, the kernel synthesizes
an skb where the relevant parameters (e.g., source address) are set. The
skb is then passed to ip_route_output_key_hash_rcu() which might call
into the flow dissector in case a multipath route was hit and a nexthop
needs to be selected based on the multipath hash.

Since both 'skb->dev' and 'skb->sk' are not set, a warning is triggered
in the flow dissector [1]. The warning is there to prevent codepaths
from silently falling back to the standard flow dissector instead of the
BPF one.

Therefore, instead of removing the warning, set 'skb->dev' to the
loopback device, as its not used for anything but resolving the correct
namespace.

[1]
WARNING: CPU: 1 PID: 24819 at net/core/flow_dissector.c:764 __skb_flow_dissect+0x314/0x16b0
...
RSP: 0018:ffffa0df41fdf650 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8bcded232000 RCX: 0000000000000000
RDX: ffffa0df41fdf7e0 RSI: ffffffff98e415a0 RDI: ffff8bcded232000
RBP: ffffa0df41fdf760 R08: 0000000000000000 R09: 0000000000000000
R10: ffffa0df41fdf7e8 R11: ffff8bcdf27a3000 R12: ffffffff98e415a0
R13: ffffa0df41fdf7e0 R14: ffffffff98dd2980 R15: ffffa0df41fdf7e0
FS: 00007f46f6897680(0000) GS:ffff8bcdf7a80000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000055933e95f9a0 CR3: 000000021e636000 CR4: 00000000001006e0
Call Trace:
fib_multipath_hash+0x28c/0x2d0
? fib_multipath_hash+0x28c/0x2d0
fib_select_path+0x241/0x32f
? __fib_lookup+0x6a/0xb0
ip_route_output_key_hash_rcu+0x650/0xa30
? __alloc_skb+0x9b/0x1d0
inet_rtm_getroute+0x3f7/0xb80
? __alloc_pages_nodemask+0x11c/0x2c0
rtnetlink_rcv_msg+0x1d9/0x2f0
? rtnl_calcit.isra.24+0x120/0x120
netlink_rcv_skb+0x54/0x130
rtnetlink_rcv+0x15/0x20
netlink_unicast+0x20a/0x2c0
netlink_sendmsg+0x2d1/0x3d0
sock_sendmsg+0x39/0x50
___sys_sendmsg+0x2a0/0x2f0
? filemap_map_pages+0x16b/0x360
? __handle_mm_fault+0x108e/0x13d0
__sys_sendmsg+0x63/0xa0
? __sys_sendmsg+0x63/0xa0
__x64_sys_sendmsg+0x1f/0x30
do_syscall_64+0x5a/0x120
entry_SYSCALL_64_after_hwframe+0x44/0xa9

Fixes: d0e13a1488ad ("flow_dissector: lookup netns by skb->sk if skb->dev is NULL")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mscc: ocelot: Register poll timeout should be wall time not attempts

When doing indirect access in the Ocelot chip, a command is setup,
issued and then we need to poll until the result is ready. The polling
timeout is specified in milliseconds in the datasheet and not in
register access attempts.
It is not a bug on the currently supported platform, but we observed
that the code does not work properly on other platforms that we want to
support as the timing requirements there are different.

Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

neighbour: remove stray semicolon

Currently the stray semicolon means that the final term in the addition
is being missed. Fix this by removing it. Cleans up clang warning:

net/core/neighbour.c:2821:9: warning: expression result unused [-Wunused-value]

Fixes: 82cbb5c631a0 ("neighbour: register rtnl doit handler")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-By: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

MAINTAINERS: update cxgb4 and cxgb3 maintainer

Arjun Vynipadath will be taking over as maintainer from now.

Signed-off-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: frags: Fix bogus skb->sk in reassembled packets

It was reported that IPsec would crash when it encounters an IPv6
reassembled packet because skb->sk is non-zero and not a valid
pointer.

This is because skb->sk is now a union with ip_defrag_offset.

This patch fixes this by resetting skb->sk when exiting from
the reassembly code.

Reported-by: Xiumei Mu <xmu@redhat.com>
Fixes: 219badfaade9 ("ipv6: frags: get rid of ip6frag_skb_cb/...")
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

mscc: Configured MAC entries should be locked.

The MAC table in Ocelot supports auto aging (normal) and static entries.
MAC entries that is manually configured should be static and not subject
to aging.

Fixes: a556c76adc05 ("net: mscc: Add initial Ocelot switch support")
Signed-off-by: Allan Nielsen <allan.nielsen@microchip.com>
Reviewed-by: Steen Hegelund <steen.hegelund@microchip.com>
Signed-off-by: Steen Hegelund <steen.hegelund@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: microchip: fix unicast frame leak

Port partitioning is done by enabling UNICAST_VLAN_BOUNDARY and changing
the default port membership of 0x7f to other values such that there is
no communication between ports.  In KSZ9477 the member for port 1 is
0x41; port 2, 0x42; port 3, 0x44; port 4, 0x48; port 5, 0x50; and port 7,
0x60.  Port 6 is the host port.

Setting a zero value can be used to stop port from receiving.

However, when UNICAST_VLAN_BOUNDARY is disabled and the unicast addresses
are already learned in the dynamic MAC table, setting zero still allows
devices connected to those ports to communicate.  This does not apply to
multicast and broadcast addresses though.  To prevent these leaks and
make the function of port membership consistent UNICAST_VLAN_BOUNDARY
should never be disabled.

Note that UNICAST_VLAN_BOUNDARY is enabled by default in KSZ9477.

Fixes: b987e98e50ab90e5 ("dsa: add DSA switch driver for Microchip KSZ9477")
Signed-off-by: Tristram Ha <Tristram.Ha@microchip.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vxlan: Correct merge error.

When resolving the conflict wrt. the vxlan_fdb_update call
in vxlan_changelink() I made the last argument false instead
of true.

Fix this.

Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: netns: shrink netns_ct struct

remove the obsolete sysctl anchors and move auto_assign_helper_warned
to avoid/cover a hole. Reduces size by 40 bytes on 64 bit.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Merge tag 'mlx5-updates-2018-12-19' of git://git./linux/kernel/git/saeed/linux

Saeed Mahameed says:

====================
mlx5-updates-2018-12-19

This series adds some misc updates and the support for tunnels over VLAN
tc offloads.

From Miroslav Lichvar, patches #1,2
1) Update timecounter at least twice per counter overflow
2) Extend PTP gettime function to read system clock

From Gavi Teitz, patch #3
3) Increase VF representors' SQ size to 128

From Eli Britstein and Or Gerlitz, patches #4-10
4) Adds the capability to support tunnels over VLAN device.

Patch 4 avoids crash for TC flow with egress upper devices

Patch 5 refactors tunnel routing devs into a helper function

Patch 6 avoids crash for TC encap flows with vlan on underlay

Patches 7-8 refactor encap tunnel header preparing code.

Patch 9 adds support for building VLAN tagged ETH header.

Patch 10 adds support for tunnel routing to VLAN device.

From Aviv, patches 11,12 to fix earlier VF lag series
5) Fix query_nic_sys_image_guid() error during init
6) Fix LAG requirement when CONFIG_MLX5_ESWITCH is off
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: conntrack: remove empty pernet fini stubs

after moving sysctl handling into single place, the init functions
can't fail anymore and some of the fini functions are empty.

Remove them and change return type to void.
This also simplifies error unwinding in conntrack module init path.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: conntrack: merge ecache and timestamp sysctl tables with main one

Similar to previous change, this time for eache and timestamp.
Unlike helper and acct, these can be disabled at build time, so they
need ifdef guards.

Next patch will remove a few (now obsolete) functions.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: conntrack: merge acct and helper sysctl table with main one

Needless copy&paste, just handle all in one. Next patch will handle
acct and timestamp, which have similar functions.

Intentionally leaves cruft behind, will be cleaned up in a followup
patch.

The obsolete sysctl pointers in netns_ct struct are left in place and
removed in a single change, as changes to netns trigger rebuild of
almost all files.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: conntrack: add mnemonics for sysctl table

Its a bit hard to see what table[3] really lines up with, so add
human-readable mnemonics and use them for initialisation.

This makes it easier to see e.g. which sysctls are not exported to
unprivileged userns.

objdiff shows no changes.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: conntrack: un-export seq_print_acct

Only one caller, just place it where its needed.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: conntrack: register sysctl table for gre

This patch adds two sysctl knobs for GRE:

net.netfilter.nf_conntrack_gre_timeout = 30
net.netfilter.nf_conntrack_gre_timeout_stream = 180

Update the Documentation as well.

Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Merge branch 'mlxsw-Two-usability-improvements'

Ido Schimmel says:

====================
mlxsw: Two usability improvements

This patchset contains two small improvements in the mlxsw driver. The
first one, in patches #1-#2, relieves the user from the need to
configure a VLAN interface and only later the corresponding VXLAN
tunnel. The issue is explained in detail in the first patch.

The second improvement is described below and allows the user to make
use of VID 1 by having the driver use the reserved 4095 VID for untagged
traffic.

VLAN entries on a given port can be associated with either a bridge or a
router. For example, if swp1.10 is assigned an IP address and swp1.20 is
enslaved to a VLAN-unaware bridge, then both {Port 1, VID 10} and {Port
1, VID 20} would be associated with a filtering identifier (FID) of the
correct type.

In case swp1 itself is assigned an IP address or enslaved to a
VLAN-unaware bridge, then a FID would be associated with {Port 1, VID
1}. Using VID 1 for this purpose means that VLAN devices with VID 1
cannot be created over mlxsw ports, as this VID is (ab)used as the
default VLAN.

Instead of using VID 1 for this purpose, we can use VID 4095 which is
reserved for internal use and cannot be configured by either the 8021q
or the bridge driver.

Patches #3-#7 perform small and non-functional changes that finally
allow us to switch to VID 4095 as the default VID in patch #8.

Patch #9 removes the limitation about creation of VLAN devices with VID
1 over mlxsw ports.

Patches #10-#11 add test cases.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: forwarding: Add router test with VID 1

Previous patches made it possible to setup VLAN devices with VID 1 over
mlxsw ports. Verify this functionality actually works by conducting a
simple router test over VID 1.

Adding this test as a generic test since it can be run using veth pairs
and it can also be useful for other physical devices where VID 1 was
considered reserved (knowingly or not).

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: mlxsw: Adjust test regarding VID 1

Previous patches made it possible to create VLAN devices with VID 1 over
mlxsw ports. Adjust the test to verify such an operation succeeds.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum: Remove limitation regarding VID 1

VID 1 is not reserved anymore, so remove the check that prevented the
creation of VLAN devices with this VID over mlxsw ports.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum: Switch to VID 4095 as default VID

There is no need to abuse VID 1 anymore and we can instead use VID 4095
as the default VLAN, which will be configured on the port throughout its
lifetime.

The OVS join / leave functions are changed to enable VIDs 1-4094
(inclusive) instead of 2-4095. This because VID 4095 is now the default
VLAN instead of 1.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum: Add an helper function to cleanup VLAN entries

VLAN entries on a port can be associated with either a bridge VLAN or a
router port. Before the VLAN entry is destroyed these associations need
to be cleaned up.

Currently, this is always invoked from the function which destroys the
VLAN entry, but next patch is going to skip the destruction of the
default entry when a port in unlinked from a LAG.

The above does not mean that the associations should not be cleaned up,
so add a helper that will be invoked from both call sites.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum: Store pointer to default port VLAN in port struct

Subsequent patches will need to access the default port VLAN. Since this
VLAN will exist throughout the lifetime of the port, simply store it in
the port's struct.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum: Allow controlling destruction of default port VLAN

The function allows flushing all the existing VLAN entries on a port. It
is invoked when a port is destroyed and when it is unlinked from a LAG.
In the latter case, when moving to the new default VLAN, there will not
be a need to destroy the default VLAN entry.

Therefore, add an argument that allows to control whether the default
port VLAN should be destroyed or not. Currently it is always set to
'true'.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum: Set PVID during port initialization

Currently, the driver does not set the port's PVID when initializing a
new port. This is because the driver is using VID 1 as PVID which is the
firmware default.

Subsequent patches are going to change the PVID the driver is setting
when initializing a new port.

Prepare for that by explicitly setting the port's PVID.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum: Replace hard-coded default VID with a define

Subsequent patches are going to replace the current default VID (1) with
VLAN_N_VID - 1 (4095).

Prepare for this conversion by replacing the hard-coded '1' with a
define.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

selftests: mlxsw: Add a test case for L3 VNI

Previous patch added the ability to offload a VXLAN tunnel used for L3
VNI when it is present in the VLAN-aware bridge before the corresponding
VLAN interface is configured. This patch adds a test case to verify
that.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: spectrum_router: Do not force specific configuration order

In symmetric routing, the only two members in the VLAN corresponding to
the L3 VNI are the router port and the VXLAN tunnel.

In case the VXLAN device is already enslaved to the bridge and only
later the VLAN interface is configured, the tunnel will not be
offloaded.

The reason for this is that when the router interface (RIF)
corresponding to the VLAN interface is configured, it calls the core
fid_get() API which does not check if NVE should be enabled on the FID.

Instead, call into the bridge code which will check if NVE should be
enabled on the FID.

This effectively means that the same code path is used to retrieve a FID
when either a local port or a router port joins the FID.

Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Petr Machata <petrm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: conntrack: udp: set stream timeout to 2 minutes

We have no explicit signal when a UDP stream has terminated, peers just
stop sending.

For suspected stream connections a timeout of two minutes is sane to keep
NAT mapping alive a while longer.

It matches tcp conntracks 'timewait' default timeout value.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: conntrack: udp: only extend timeout to stream mode after 2s

Currently DNS resolvers that send both A and AAAA queries from same source port
can trigger stream mode prematurely, which results in non-early-evictable conntrack entry
for three minutes, even though DNS requests are done in a few milliseconds.

Add a two second grace period where we continue to use the ordinary
30-second default timeout. Its enough for DNS request/response traffic,
even if two request/reply packets are involved.

ASSURED is still set, else conntrack (and thus a possible
NAT mapping ...) gets zapped too in case conntrack table runs full.

Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Merge branch '1GbE' of git://git./linux/kernel/git/jkirsher/next-queue

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2018-12-20

This series contains updates to e100, igb, ixgbe, i40e and ice drivers.

I replaced spinlocks for mutex locks to reduce the latency on CPU0 for
igb when updating the statistics. This work was based off a patch
provided by Jan Jablonsky, which was against an older version of the igb
driver.

Jesus adjusts the receive packet buffer size from 32K to 30K when
running in QAV mode, to stay within 60K for total packet buffer size for
igb.

Vinicius adds igb kernel documentation regarding the CBS algorithm and
its implementation in the i210 family of NICs.

YueHaibing from Huawei fixed the e100 driver that was potentially
passing a NULL pointer, so use the kernel macro IS_ERR_OR_NULL()
instead.

Konstantin Khorenko fixes i40e where we were not setting up the
neigh_priv_len in our net_device, which caused the driver to read beyond
the neighbor entry allocated memory.

Miroslav Lichvar extends the PTP gettime() to read the system clock by
adding support for PTP_SYS_OFFSET_EXTENDED ioctl in i40e.

Young Xiao fixed the ice driver to only enable NAPI on q_vectors that
actually have transmit and receive rings.

Kai-Heng Feng fixes an igb issue that when placed in suspend mode, the
NIC does not wake up when a cable is plugged in. This was due to the
driver not setting PME during runtime suspend.

Stephen Douthit enables the ixgbe driver allow DSA devices to use the
MII interface to talk to switches.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'i2c/for-current' of git://git./linux/kernel/git/wsa/linux

Pull i2c fixes from Wolfram Sang:
"I2C has a MAINTAINERS update for you, so people will be immediately
  pointed to the right person for this previously orphaned driver.

  And one of Arnd's build warning fixes for a new driver added this
  cycle"

* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: nvidia-gpu: mark resume function as __maybe_unused
  MAINTAINERS: add entry for i2c-axxia driver

Merge branch 'bpf-sockmap-fixes-and-improvements'

John Fastabend says:

====================
Set of bpf fixes and improvements to make sockmap with kTLS usable
with "real" applications. This set came as the fallout of pulling
kTLS+sockmap into Cilium[1] and running in container environment.

Roughly broken into three parts,

Patches 1-3: resolve/improve handling of size field in sk_msg_md
Patch     4: it became difficult to use this in Cilium when the
     SK_PASS verdict was not correctly handle. So handle
     the case correctly.
Patch   5-8: Set of issues found while running OpenSSL TX kTLS
     enabled applications. This resolves the most obvious
     issues and gets applications using kTLS TX up and
     running with sock{map|has}.

Other than the "sk_msg, zap ingress queue on psock down" (PATCH 6/8)
which can potentially cause a WARNING the issues fixed in this
series do not cause kernel side warnings, BUG, etc. but instead
cause stalls and other odd behavior in the user space applications
when using kTLS with BPF policies applied.

Primarily tested with 'curl' compiled with latest openssl and
also 'openssl s_client/s_server' containers using Cilium network
plugin with docker/k8s. Some basic testing with httpd was also
enabled. Cilium CI tests will be added shortly to cover these
cases as well. We also have 'wrk' and other test and benchmarking
tools we can run now.

We have two more sets of patches currently under testing that
will be sent shortly to address a few more issues. First the
OpenSSL RX kTLS side breaks when both sk_msg and sk_skb_verdict
programs are used with kTLS, the sk_skb_verdict programs are
not enforced. Second skmsg needs to call into tcp stack to
send to indicate consumed data.
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

bpf: tls_sw, init TLS ULP removes BPF proto hooks

The existing code did not expect users would initialize the TLS ULP
without subsequently calling the TLS TX enabling socket option.
If the application tries to send data after the TLS ULP enable op
but before the TLS TX enable op the BPF sk_msg verdict program is
skipped. This patch resolves this by converting the ipv4 sock ops
to be calculated at init time the same way ipv6 ops are done. This
pulls in any changes to the sock ops structure that have been made
after the socket was created including the changes from adding the
socket to a sock{map|hash}.

This was discovered by running OpenSSL master branch which calls
the TLS ULP setsockopt early in TLS handshake but only enables
the TLS TX path once the handshake has completed. As a result the
datapath missed the initial handshake messages.

Fixes: 02c558b2d5d6 ("bpf: sockmap, support for msg_peek in sk_msg with redirect ingress")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

bpf: sk_msg, sock{map|hash} redirect through ULP

A sockmap program that redirects through a kTLS ULP enabled socket
will not work correctly because the ULP layer is skipped. This
fixes the behavior to call through the ULP layer on redirect to
ensure any operations required on the data stream at the ULP layer
continue to be applied.

To do this we add an internal flag MSG_SENDPAGE_NOPOLICY to avoid
calling the BPF layer on a redirected message. This is
required to avoid calling the BPF layer multiple times (possibly
recursively) which is not the current/expected behavior without
ULPs. In the future we may add a redirect flag if users _do_
want the policy applied again but this would need to work for both
ULP and non-ULP sockets and be opt-in to avoid breaking existing
programs.

Also to avoid polluting the flag space with an internal flag we
reuse the flag space overlapping MSG_SENDPAGE_NOPOLICY with
MSG_WAITFORONE. Here WAITFORONE is specific to recv path and
SENDPAGE_NOPOLICY is only used for sendpage hooks. The last thing
to verify is user space API is masked correctly to ensure the flag
can not be set by user. (Note this needs to be true regardless
because we have internal flags already in-use that user space
should not be able to set). But for completeness we have two UAPI
paths into sendpage, sendfile and splice.

In the sendfile case the function do_sendfile() zero's flags,

./fs/read_write.c:
static ssize_t do_sendfile(int out_fd, int in_fd, loff_t *ppos,
        size_t count, loff_t max)
{
   ...
   fl = 0;
#if 0
   /*
    * We need to debate whether we can enable this or not. The
    * man page documents EAGAIN return for the output at least,
    * and the application is arguably buggy if it doesn't expect
    * EAGAIN on a non-blocking file descriptor.
    */
    if (in.file->f_flags & O_NONBLOCK)
fl = SPLICE_F_NONBLOCK;
#endif
    file_start_write(out.file);
    retval = do_splice_direct(in.file, &pos, out.file, &out_pos, count, fl);
}

In the splice case the pipe_to_sendpage "actor" is used which
masks flags with SPLICE_F_MORE.

./fs/splice.c:
static int pipe_to_sendpage(struct pipe_inode_info *pipe,
    struct pipe_buffer *buf, struct splice_desc *sd)
{
   ...
   more = (sd->flags & SPLICE_F_MORE) ? MSG_MORE : 0;
   ...
}

Confirming what we expect that internal flags  are in fact internal
to socket side.

Fixes: d3b18ad31f93 ("tls: add bpf support to sk_msg handling")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

bpf: sk_msg, zap ingress queue on psock down

In addition to releasing any cork'ed data on a psock when the psock
is removed we should also release any skb's in the ingress work queue.
Otherwise the skb's eventually get free'd but late in the tear
down process so we see the WARNING due to non-zero sk_forward_alloc.

  void sk_stream_kill_queues(struct sock *sk)
  {
...
WARN_ON(sk->sk_forward_alloc);
...
  }

Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

bpf: sk_msg, fix socket data_ready events

When a skb verdict program is in-use and either another BPF program
redirects to that socket or the new SK_PASS support is used the
data_ready callback does not wake up application. Instead because
the stream parser/verdict is using the sk data_ready callback we wake
up the stream parser/verdict block.

Fix this by adding a helper to check if the stream parser block is
enabled on the sk and if so call the saved pointer which is the
upper layers wake up function.

This fixes application stalls observed when an application is waiting
for data in a blocking read().

Fixes: d829e9c4112b ("tls: convert to generic sk_msg interface")
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

bpf: skb_verdict, support SK_PASS on RX BPF path

Add SK_PASS verdict support to SK_SKB_VERDICT programs. Now that
support for redirects exists we can implement SK_PASS as a redirect
to the same socket. This simplifies the BPF programs and avoids an
extra map lookup on RX path for simple visibility cases.

Further, reduces user (BPF programmer in this context) confusion
when their program drops skb due to lack of support.

Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

bpf: skmsg, replace comments with BUILD bug

Enforce comment on structure layout dependency with a BUILD_BUG_ON
to ensure the condition is maintained.

Suggested-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: John Fastabend <john.fastabend@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>