only safe with partial memory descriptor list support enabled
(allow_ext_sg=1).
* comp_vector, a number in the range 0..n-1 specifying the
- MSI-X completion vector. Some HCA's allocate multiple (n)
- MSI-X vectors per HCA port. If the IRQ affinity masks of
- these interrupts have been configured such that each MSI-X
- interrupt is handled by a different CPU then the comp_vector
- parameter can be used to spread the SRP completion workload
- over multiple CPU's.
+ MSI-X completion vector of the first RDMA channel. Some
+ HCA's allocate multiple (n) MSI-X vectors per HCA port. If
+ the IRQ affinity masks of these interrupts have been
+ configured such that each MSI-X interrupt is handled by a
+ different CPU then the comp_vector parameter can be used to
+ spread the SRP completion workload over multiple CPU's.
* tl_retry_count, a number in the range 2..7 specifying the
IB RC retry count.
* queue_size, the maximum number of commands that the
descriptor list in an SRP_CMD when communicating with an SRP
target.
+What: /sys/class/scsi_host/host<n>/ch_count
+Date: April 1, 2015
+KernelVersion: 3.19
+Contact: linux-rdma@vger.kernel.org
+Description: Number of RDMA channels used for communication with the SRP
+ target.
+
What: /sys/class/scsi_host/host<n>/cmd_sg_entries
Date: May 19, 2011
KernelVersion: 2.6.39
Description: Maximum number of data buffer descriptors that may be sent to
the target in a single SRP_CMD request.
+What: /sys/class/scsi_host/host<n>/comp_vector
+Date: September 2, 2013
+KernelVersion: 3.11
+Contact: linux-rdma@vger.kernel.org
+Description: Completion vector used for the first RDMA channel.
+
What: /sys/class/scsi_host/host<n>/dgid
Date: June 17, 2006
KernelVersion: 2.6.17
Contact: Konrad Rzeszutek <ketuzsezr@darnok.org>
Description: The /sys/firmware/ibft/ethernetX directory will contain
files that expose the iSCSI Boot Firmware Table NIC data.
- This can this can the IP address, MAC, and gateway of the NIC.
+ Usually this contains the IP address, MAC, and gateway of the NIC.
PHONY += cleanmediadocs
cleanmediadocs:
- -@rm `find $(MEDIA_OBJ_DIR) -type l` $(GENFILES) $(OBJIMGFILES) 2>/dev/null
+ -@rm -f `find $(MEDIA_OBJ_DIR) -type l` $(GENFILES) $(OBJIMGFILES) 2>/dev/null
$(obj)/media_api.xml: $(GENFILES) FORCE
<para>Added compound control types and &VIDIOC-QUERY-EXT-CTRL;.
</para>
</listitem>
+ </orderedlist>
+ </section>
+
+ <section>
<title>V4L2 in Linux 3.18</title>
<orderedlist>
<listitem>
testing repository exists into which virtually all subsystem trees are
pulled on an almost daily basis:
http://git.kernel.org/?p=linux/kernel/git/next/linux-next.git
- http://linux.f-seidel.de/linux-next/pmwiki/
This way, the -next kernel gives a summary outlook onto what will be
expected to go into the mainline kernel at the next merge period.
executed in user mode, or executed in the idle loop, we can
safely free up that item.
- Preemptible variants of RCU (CONFIG_TREE_PREEMPT_RCU) get the
+ Preemptible variants of RCU (CONFIG_PREEMPT_RCU) get the
same effect, but require that the readers manipulate CPU-local
counters. These counters allow limited types of blocking within
RCU read-side critical sections. SRCU also uses CPU-local
o I hear that RCU needs work in order to support realtime kernels?
This work is largely completed. Realtime-friendly RCU can be
- enabled via the CONFIG_TREE_PREEMPT_RCU kernel configuration
+ enabled via the CONFIG_PREEMPT_RCU kernel configuration
parameter. However, work is in progress for enabling priority
boosting of preempted RCU read-side critical sections. This is
needed if you have CPU-bound realtime threads.
Stall-warning messages may be enabled and disabled completely via
/sys/module/rcupdate/parameters/rcu_cpu_stall_suppress.
-CONFIG_RCU_CPU_STALL_VERBOSE
-
- This kernel configuration parameter causes the stall warning to
- also dump the stacks of any tasks that are blocking the current
- RCU-preempt grace period.
-
CONFIG_RCU_CPU_STALL_INFO
This kernel configuration parameter causes the stall warning to
and that the stall was affecting RCU-sched. This message will normally be
followed by a stack dump of the offending CPU. On TREE_RCU kernel builds,
RCU and RCU-sched are implemented by the same underlying mechanism,
-while on TREE_PREEMPT_RCU kernel builds, RCU is instead implemented
+while on PREEMPT_RCU kernel builds, RCU is instead implemented
by rcu_preempt_state.
On the other hand, if the offending CPU fails to print out a stall-warning
This message indicates that CPU 2 detected that CPUs 3 and 5 were both
causing stalls, and that the stall was affecting RCU-bh. This message
will normally be followed by stack dumps for each CPU. Please note that
-TREE_PREEMPT_RCU builds can be stalled by tasks as well as by CPUs,
+PREEMPT_RCU builds can be stalled by tasks as well as by CPUs,
and that the tasks will be indicated by PID, for example, "P3421".
It is even possible for a rcu_preempt_state stall to be caused by both
CPUs -and- tasks, in which case the offending CPUs and tasks will all
o A CPU-bound real-time task in a CONFIG_PREEMPT_RT kernel that
is running at a higher priority than the RCU softirq threads.
This will prevent RCU callbacks from ever being invoked,
- and in a CONFIG_TREE_PREEMPT_RCU kernel will further prevent
+ and in a CONFIG_PREEMPT_RCU kernel will further prevent
RCU grace periods from ever completing. Either way, the
system will eventually run out of memory and hang. In the
- CONFIG_TREE_PREEMPT_RCU case, you might see stall-warning
+ CONFIG_PREEMPT_RCU case, you might see stall-warning
messages.
o A hardware or software issue shuts off the scheduler-clock
for rcutree and next for rcutiny.
-CONFIG_TREE_RCU and CONFIG_TREE_PREEMPT_RCU debugfs Files and Formats
+CONFIG_TREE_RCU and CONFIG_PREEMPT_RCU debugfs Files and Formats
These implementations of RCU provide several debugfs directories under the
top-level directory "rcu":
rcu/rcu_sched
Each directory contains files for the corresponding flavor of RCU.
-Note that rcu/rcu_preempt is only present for CONFIG_TREE_PREEMPT_RCU.
+Note that rcu/rcu_preempt is only present for CONFIG_PREEMPT_RCU.
For CONFIG_TREE_RCU, the RCU flavor maps onto the RCU-sched flavor,
so that activity for both appears in rcu/rcu_sched.
Used by a reader to inform the reclaimer that the reader is
entering an RCU read-side critical section. It is illegal
to block while in an RCU read-side critical section, though
- kernels built with CONFIG_TREE_PREEMPT_RCU can preempt RCU
+ kernels built with CONFIG_PREEMPT_RCU can preempt RCU
read-side critical sections. Any RCU-protected data structure
accessed during an RCU read-side critical section is guaranteed to
remain unreclaimed for the full duration of that critical section.
14) Using Reported-by:, Tested-by:, Reviewed-by:, Suggested-by: and Fixes:
-If this patch fixes a problem reported by somebody else, consider adding a
-Reported-by: tag to credit the reporter for their contribution. Please
-note that this tag should not be added without the reporter's permission,
-especially if the problem was not reported in a public forum. That said,
-if we diligently credit our bug reporters, they will, hopefully, be
-inspired to help us again in the future.
+The Reported-by tag gives credit to people who find bugs and report them and it
+hopefully inspires them to help us again in the future. Please note that if
+the bug was reported in private, then ask for permission first before using the
+Reported-by tag.
A Tested-by: tag indicates that the patch has been successfully tested (in
some environment) by the person named. This tag informs maintainers that
a need to provide an interface for such platforms to specify available firmware
operations and call them when needed.
-Firmware operations can be specified using struct firmware_ops
-
- struct firmware_ops {
- /*
- * Enters CPU idle mode
- */
- int (*do_idle)(void);
- /*
- * Sets boot address of specified physical CPU
- */
- int (*set_cpu_boot_addr)(int cpu, unsigned long boot_addr);
- /*
- * Boots specified physical CPU
- */
- int (*cpu_boot)(int cpu);
- /*
- * Initializes L2 cache
- */
- int (*l2x0_init)(void);
- };
-
-and then registered with register_firmware_ops function
+Firmware operations can be specified by filling in a struct firmware_ops
+with appropriate callbacks and then registering it with register_firmware_ops()
+function.
void register_firmware_ops(const struct firmware_ops *ops)
-the ops pointer must be non-NULL.
+The ops pointer must be non-NULL. More information about struct firmware_ops
+and its members can be found in arch/arm/include/asm/firmware.h header.
There is a default, empty set of operations provided, so there is no need to
set anything if platform does not require firmware operations.
http://dl.linux-sunxi.org/A20/A20%20User%20Manual%202013-03-22.pdf
- Allwinner A23
- + Not Supported
+ + Datasheet
+ http://dl.linux-sunxi.org/A23/A23%20Datasheet%20V1.0%2020130830.pdf
+ + User Manual
+ http://dl.linux-sunxi.org/A23/A23%20User%20Manual%20V1.0%2020130830.pdf
* Quad ARM Cortex-A7 based SoCs
- Allwinner A31 (sun6i)
+ Datasheet
- http://dl.linux-sunxi.org/A31/A31%20Datasheet%20-%20v1.00%20(2012-12-24).pdf
+ http://dl.linux-sunxi.org/A31/A3x_release_document/A31/IC/A31%20datasheet%20V1.3%2020131106.pdf
+ + User Manual
+ http://dl.linux-sunxi.org/A31/A3x_release_document/A31/IC/A31%20user%20manual%20V1.1%2020130630.pdf
- Allwinner A31s (sun6i)
+ Not Supported
+ + Datasheet
+ http://dl.linux-sunxi.org/A31/A3x_release_document/A31s/IC/A31s%20datasheet%20V1.3%2020131106.pdf
+ + User Manual
+ http://dl.linux-sunxi.org/A31/A3x_release_document/A31s/IC/A31s%20User%20Manual%20%20V1.0%2020130322.pdf
* Quad ARM Cortex-A15, Quad ARM Cortex-A7 based SoCs
- Allwinner A80
- + Not Supported
\ No newline at end of file
+ + Datasheet
+ http://dl.linux-sunxi.org/A80/A80_Datasheet_Revision_1.0_0404.pdf
--- /dev/null
+The arm64 port of the Linux kernel provides infrastructure to support
+emulation of instructions which have been deprecated, or obsoleted in
+the architecture. The infrastructure code uses undefined instruction
+hooks to support emulation. Where available it also allows turning on
+the instruction execution in hardware.
+
+The emulation mode can be controlled by writing to sysctl nodes
+(/proc/sys/abi). The following explains the different execution
+behaviours and the corresponding values of the sysctl nodes -
+
+* Undef
+ Value: 0
+ Generates undefined instruction abort. Default for instructions that
+ have been obsoleted in the architecture, e.g., SWP
+
+* Emulate
+ Value: 1
+ Uses software emulation. To aid migration of software, in this mode
+ usage of emulated instruction is traced as well as rate limited
+ warnings are issued. This is the default for deprecated
+ instructions, .e.g., CP15 barriers
+
+* Hardware Execution
+ Value: 2
+ Although marked as deprecated, some implementations may support the
+ enabling/disabling of hardware support for the execution of these
+ instructions. Using hardware execution generally provides better
+ performance, but at the loss of ability to gather runtime statistics
+ about the use of the deprecated instructions.
+
+The default mode depends on the status of the instruction in the
+architecture. Deprecated instructions should default to emulation
+while obsolete instructions must be undefined by default.
+
+Supported legacy instructions
+-----------------------------
+* SWP{B}
+Node: /proc/sys/abi/swp
+Status: Obsolete
+Default: Undef (0)
+
+* CP15 Barriers
+Node: /proc/sys/abi/cp15_barrier
+Status: Deprecated
+Default: Emulate (1)
the same bits set to 1. TTBRx selection is given by bit 63 of the
virtual address. The swapper_pg_dir contains only kernel (global)
mappings while the user pgd contains only user (non-global) mappings.
-The swapper_pgd_dir address is written to TTBR1 and never written to
+The swapper_pg_dir address is written to TTBR1 and never written to
TTBR0.
maintainers on how to implement atomic counter, bitops, and spinlock
interfaces properly.
- The atomic_t type should be defined as a signed integer.
-Also, it should be made opaque such that any kind of cast to a normal
-C integer type will fail. Something like the following should
-suffice:
+ The atomic_t type should be defined as a signed integer and
+the atomic_long_t type as a signed long integer. Also, they should
+be made opaque such that any kind of cast to a normal C integer type
+will fail. Something like the following should suffice:
typedef struct { int counter; } atomic_t;
+ typedef struct { long counter; } atomic_long_t;
Historically, counter has been declared volatile. This is now discouraged.
See Documentation/volatile-considered-harmful.txt for the complete rationale.
proper implicit or explicit read memory barrier is needed before reading the
value with atomic_read from another thread.
+As with all of the atomic_ interfaces, replace the leading "atomic_"
+with "atomic_long_" to operate on atomic_long_t.
+
The second interface can be used at runtime, as in:
struct foo { atomic_t counter; };
that requests are restarted in the order they were queue. This may happen
if the driver needs to use blk_queue_invalidate_tags().
-Tagging also defines a new request flag, REQ_QUEUED. This is set whenever
-a request is currently tagged. You should not use this flag directly,
-blk_rq_tagged(rq) is the portable way to do so.
-
3.3 I/O Submission
The routine submit_bio() is used to submit a single io. Higher level i/o
http://www.kernel.org/pub/linux/kernel/next/
-Some information about linux-next has been gathered at:
-
- http://linux.f-seidel.de/linux-next/pmwiki/
-
Linux-next has become an integral part of the kernel development process;
all patches merged during a given merge window should really have found
their way into linux-next some time before the merge window opens.
http://kernelnewbies.org/
-Information about the linux-next tree gathers at:
-
- http://linux.f-seidel.de/linux-next/pmwiki/
-
And, of course, one should not forget http://kernel.org/, the definitive
location for kernel release information.
'discard_promote_adjustment <value>'
The sequential threshold indicates the number of contiguous I/Os
-required before a stream is treated as sequential. The random threshold
+required before a stream is treated as sequential. Once a stream is
+considered sequential it will bypass the cache. The random threshold
is the number of intervening non-contiguous I/Os that must be seen
before the stream is treated as random again.
The sequential and random thresholds default to 512 and 4 respectively.
-Large, sequential ios are probably better left on the origin device
-since spindles tend to have good bandwidth. The io_tracker counts
-contiguous I/Os to try to spot when the io is in one of these sequential
-modes.
-
-Internally the mq policy maintains a promotion threshold variable. If
-the hit count of a block not in the cache goes above this threshold it
-gets promoted to the cache. The read, write and discard promote adjustment
+Large, sequential I/Os are probably better left on the origin device
+since spindles tend to have good sequential I/O bandwidth. The
+io_tracker counts contiguous I/Os to try to spot when the I/O is in one
+of these sequential modes. But there are use-cases for wanting to
+promote sequential blocks to the cache (e.g. fast application startup).
+If sequential threshold is set to 0 the sequential I/O detection is
+disabled and sequential I/O will no longer implicitly bypass the cache.
+Setting the random threshold to 0 does _not_ disable the random I/O
+stream detection.
+
+Internally the mq policy determines a promotion threshold. If the hit
+count of a block not in the cache goes above this threshold it gets
+promoted to the cache. The read, write and discard promote adjustment
tunables allow you to tweak the promotion threshold by adding a small
value based on the io type. They default to 4, 8 and 1 respectively.
If you're trying to quickly warm a new cache device you may wish to
-------------------------------------------
Boards with the Amlogic Meson6 SoC shall have the following properties:
+ Required root node property:
+ compatible: "amlogic,meson6"
-Required root node property:
-
-compatible = "amlogic,meson6";
+Boards with the Amlogic Meson8 SoC shall have the following properties:
+ Required root node property:
+ compatible: "amlogic,meson8";
- always-on : a boolean property. If present, the timer is powered through an
always-on power domain, therefore it never loses context.
+** Optional properties:
+
+- arm,cpu-registers-not-fw-configured : Firmware does not initialize
+ any of the generic timer CPU registers, which contain their
+ architecturally-defined reset values. Only supported for 32-bit
+ systems which follow the ARMv7 architected reset values.
+
+
Example:
timer {
- core-module: the root node to the Versatile platforms must have
a core-module with regs and the compatible strings
"arm,core-module-versatile", "syscon"
+
+ARM RealView Boards
+-------------------
+The RealView boards cover tailored evaluation boards that are used to explore
+the ARM11 and Cortex A-8 and Cortex A-9 processors.
+
+Required properties (in root node):
+ /* RealView Emulation Baseboard */
+ compatible = "arm,realview-eb";
+ /* RealView Platform Baseboard for ARM1176JZF-S */
+ compatible = "arm,realview-pb1176";
+ /* RealView Platform Baseboard for ARM11 MPCore */
+ compatible = "arm,realview-pb11mp";
+ /* RealView Platform Baseboard for Cortex A-8 */
+ compatible = "arm,realview-pba8";
+ /* RealView Platform Baseboard Explore for Cortex A-9 */
+ compatible = "arm,realview-pbx";
+
+Required nodes:
+
+- soc: some node of the RealView platforms must be the SoC
+ node that contain the SoC-specific devices, withe the compatible
+ string set to one of these tuples:
+ "arm,realview-eb-soc", "simple-bus"
+ "arm,realview-pb1176-soc", "simple-bus"
+ "arm,realview-pb11mp-soc", "simple-bus"
+ "arm,realview-pba8-soc", "simple-bus"
+ "arm,realview-pbx-soc", "simple-bus"
+
+- syscon: some subnode of the RealView SoC node must be a
+ system controller node pointing to the control registers,
+ with the compatible string set to one of these tuples:
+ "arm,realview-eb-syscon", "syscon"
+ "arm,realview-pb1176-syscon", "syscon"
+ "arm,realview-pb11mp-syscon", "syscon"
+ "arm,realview-pba8-syscon", "syscon"
+ "arm,realview-pbx-syscon", "syscon"
+
+ Required properties for the system controller:
+ - regs: the location and size of the system controller registers,
+ one range of 0x1000 bytes.
+
+Example:
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "skeleton.dtsi"
+
+/ {
+ model = "ARM RealView PB1176 with device tree";
+ compatible = "arm,realview-pb1176";
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,realview-pb1176-soc", "simple-bus";
+ ranges;
+
+ syscon: syscon@10000000 {
+ compatible = "arm,realview-syscon", "syscon";
+ reg = <0x10000000 0x1000>;
+ };
+
+ };
+};
--- /dev/null
+Broadcom Cygnus device tree bindings
+------------------------------------
+
+
+Boards with Cygnus SoCs shall have the following properties:
+
+Required root node property:
+
+BCM11300
+compatible = "brcm,bcm11300", "brcm,cygnus";
+
+BCM11320
+compatible = "brcm,bcm11320", "brcm,cygnus";
+
+BCM11350
+compatible = "brcm,bcm11350", "brcm,cygnus";
+
+BCM11360
+compatible = "brcm,bcm11360", "brcm,cygnus";
+
+BCM58300
+compatible = "brcm,bcm58300", "brcm,cygnus";
+
+BCM58302
+compatible = "brcm,bcm58302", "brcm,cygnus";
+
+BCM58303
+compatible = "brcm,bcm58303", "brcm,cygnus";
+
+BCM58305
+compatible = "brcm,bcm58305", "brcm,cygnus";
# List of phandles to idle state nodes supported
by this cpu [3].
+ - rockchip,pmu
+ Usage: optional for systems that have an "enable-method"
+ property value of "rockchip,rk3066-smp"
+ While optional, it is the preferred way to get access to
+ the cpu-core power-domains.
+ Value type: <phandle>
+ Definition: Specifies the syscon node controlling the cpu core
+ power domains.
+
Example 1 (dual-cluster big.LITTLE system 32-bit):
cpus {
i.MX6q generic board
Required root node properties:
- compatible = "fsl,imx6q";
+
+
+Freescale LS1021A Platform Device Tree Bindings
+------------------------------------------------
+
+Required root node compatible properties:
+ - compatible = "fsl,ls1021a";
+
+Freescale LS1021A SoC-specific Device Tree Bindings
+-------------------------------------------
+
+Freescale SCFG
+ SCFG is the supplemental configuration unit, that provides SoC specific
+configuration and status registers for the chip. Such as getting PEX port
+status.
+ Required properties:
+ - compatible: should be "fsl,ls1021a-scfg"
+ - reg: should contain base address and length of SCFG memory-mapped registers
+
+Example:
+ scfg: scfg@1570000 {
+ compatible = "fsl,ls1021a-scfg";
+ reg = <0x0 0x1570000 0x0 0x10000>;
+ };
+
+Freescale DCFG
+ DCFG is the device configuration unit, that provides general purpose
+configuration and status for the device. Such as setting the secondary
+core start address and release the secondary core from holdoff and startup.
+ Required properties:
+ - compatible: should be "fsl,ls1021a-dcfg"
+ - reg : should contain base address and length of DCFG memory-mapped registers
+
+Example:
+ dcfg: dcfg@1ee0000 {
+ compatible = "fsl,ls1021a-dcfg";
+ reg = <0x0 0x1ee0000 0x0 0x10000>;
+ };
"arm,cortex-a7-gic"
"arm,arm11mp-gic"
"brcm,brahma-b15-gic"
+ "arm,arm1176jzf-devchip-gic"
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Specifies the number of cells needed to encode an
interrupt source. The type shall be a <u32> and the value shall be 3.
- groups: a list of strings describing the group names.
- function: a string describing the function used to mux the groups.
+* Reset controller binding
+
+A reset controller is part of the chip control registers set. The chip control
+node also provides the reset. The register set is not at the same offset between
+Berlin SoCs.
+
+Required property:
+- #reset-cells: must be set to 2
+
Example:
chip: chip-control@ea0000 {
compatible = "marvell,berlin2-chip-ctrl";
#clock-cells = <1>;
+ #reset-cells = <2>;
reg = <0xea0000 0x400>;
clocks = <&refclk>, <&externaldev 0>;
clock-names = "refclk", "video_ext0";
-Mediatek MT6589 Platforms Device Tree Bindings
+MediaTek mt65xx & mt81xx Platforms Device Tree Bindings
-Boards with a SoC of the Mediatek MT6589 shall have the following property:
+Boards with a MediaTek mt65xx/mt81xx SoC shall have the following property:
Required root node property:
-compatible: must contain "mediatek,mt6589"
+compatible: Must contain one of
+ "mediatek,mt6589"
+ "mediatek,mt6592"
+ "mediatek,mt8127"
+ "mediatek,mt8135"
Supported boards:
- bq Aquaris5 smart phone:
Required root node properties:
- compatible = "mundoreader,bq-aquaris5", "mediatek,mt6589";
+- Evaluation board for MT6592:
+ Required root node properties:
+ - compatible = "mediatek,mt6592-evb", "mediatek,mt6592";
+- MTK mt8127 tablet moose EVB:
+ Required root node properties:
+ - compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
+- MTK mt8135 tablet EVB:
+ Required root node properties:
+ - compatible = "mediatek,mt8135-evbp1", "mediatek,mt8135";
- AM335X Bone : Low cost community board
compatible = "ti,am335x-bone", "ti,am33xx", "ti,omap3"
+- AM335X OrionLXm : Substation Automation Platform
+ compatible = "novatech,am335x-lxm", "ti,am33xx"
+
- OMAP5 EVM : Evaluation Module
compatible = "ti,omap5-evm", "ti,omap5"
Rockchip platforms device tree bindings
---------------------------------------
+- MarsBoard RK3066 board:
+ Required root node properties:
+ - compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a";
+
- bq Curie 2 tablet:
Required root node properties:
- compatible = "mundoreader,bq-curie2", "rockchip,rk3066a";
-* Samsung's Exynos4210 based SMDKV310 evaluation board
-
-SMDKV310 evaluation board is based on Samsung's Exynos4210 SoC.
+* Samsung's Exynos SoC based boards
Required root node properties:
- compatible = should be one or more of the following.
- (a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board.
- (b) "samsung,exynos4210" - for boards based on Exynos4210 SoC.
+ - "samsung,monk" - for Exynos3250-based Samsung Simband board.
+ - "samsung,rinato" - for Exynos3250-based Samsung Gear2 board.
+ - "samsung,smdkv310" - for Exynos4210-based Samsung SMDKV310 eval board.
+ - "samsung,trats" - for Exynos4210-based Tizen Reference board.
+ - "samsung,universal_c210" - for Exynos4210-based Samsung board.
+ - "samsung,smdk4412", - for Exynos4412-based Samsung SMDK4412 eval board.
+ - "samsung,trats2" - for Exynos4412-based Tizen Reference board.
+ - "samsung,smdk5250" - for Exynos5250-based Samsung SMDK5250 eval board.
+ - "samsung,xyref5260" - for Exynos5260-based Samsung board.
+ - "samsung,smdk5410" - for Exynos5410-based Samsung SMDK5410 eval board.
+ - "samsung,smdk5420" - for Exynos5420-based Samsung SMDK5420 eval board.
+ - "samsung,sd5v1" - for Exynos5440-based Samsung board.
+ - "samsung,ssdk5440" - for Exynos5440-based Samsung board.
Optional:
- firmware node, specifying presence and type of secure firmware:
Boards with the Nomadik SoC include:
+Nomadik NHK-15 board manufactured by ST Microelectronics:
+
+Required root node property:
+
+compatible="st,nomadik-nhk-15";
+
S8815 "MiniKit" manufactured by Calao Systems:
Required root node property:
--- /dev/null
+Allwinner sunXi Platforms Device Tree Bindings
+
+Each device tree must specify which Allwinner SoC it uses,
+using one of the following compatible strings:
+
+ allwinner,sun4i-a10
+ allwinner,sun5i-a10s
+ allwinner,sun5i-a13
+ allwinner,sun6i-a31
+ allwinner,sun7i-a20
+ allwinner,sun8i-a23
+ allwinner,sun9i-a80
--- /dev/null
+* ST-Ericsson UX500 PM Domains
+
+UX500 supports multiple PM domains which are used to gate power to one or
+more peripherals on the SOC.
+
+The implementation of PM domains for UX500 are based upon the generic PM domain
+and use the corresponding DT bindings.
+
+==PM domain providers==
+
+Required properties:
+ - compatible: Must be "stericsson,ux500-pm-domains".
+ - #power-domain-cells : Number of cells in a power domain specifier, must be 1.
+
+Example:
+ pm_domains: pm_domains0 {
+ compatible = "stericsson,ux500-pm-domains";
+ #power-domain-cells = <1>;
+ };
+
+==PM domain consumers==
+
+Required properties:
+ - power-domains: A phandle and PM domain specifier. Below are the list of
+ valid specifiers:
+
+ Index Specifier
+ ----- ---------
+ 0 DOMAIN_VAPE
+
+Example:
+ sdi0_per1@80126000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ power-domains = <&pm_domains DOMAIN_VAPE>
+ };
Required properties:
- compatible : should contain one of the following:
- "renesas,sata-r8a7779" for R-Car H1
- - "renesas,sata-r8a7790" for R-Car H2
- - "renesas,sata-r8a7791" for R-Car M2
+ - "renesas,sata-r8a7790-es1" for R-Car H2 ES1
+ - "renesas,sata-r8a7790" for R-Car H2 other than ES1
+ - "renesas,sata-r8a7791" for R-Car M2-W
+ - "renesas,sata-r8a7793" for R-Car M2-N
- reg : address and length of the SATA registers;
- interrupts : must consist of one interrupt specifier.
Required properties:
-- compatible: should be "brcm,gisb-arb"
+- compatible:
+ "brcm,gisb-arb" or "brcm,bcm7445-gisb-arb" for 28nm chips
+ "brcm,bcm7435-gisb-arb" for newer 40nm chips
+ "brcm,bcm7400-gisb-arb" for older 40nm chips and all 65nm chips
+ "brcm,bcm7038-gisb-arb" for 130nm chips
- reg: specifies the base physical address and size of the registers
- interrupt-parent: specifies the phandle to the parent interrupt controller
this arbiter gets interrupt line from
- compatible: Should be set to "marvell,mbus-controller".
- reg: Device's register space.
- Two entries are expected (see the examples below):
- the first one controls the devices decoding window and
- the second one controls the SDRAM decoding window.
+ Two or three entries are expected (see the examples below):
+ the first one controls the devices decoding window,
+ the second one controls the SDRAM decoding window and
+ the third controls the MBus bridge (only with the
+ marvell,armada370-mbus and marvell,armadaxp-mbus
+ compatible strings)
Example:
mbusc: mbus-controller@20000 {
compatible = "marvell,mbus-controller";
- reg = <0x20000 0x100>, <0x20180 0x20>;
+ reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
};
/* more children ...*/
mbusc: mbus-controller@20000 {
compatible = "marvell,mbus-controller";
- reg = <0x20000 0x100>, <0x20180 0x20>;
+ reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
};
/* more children ...*/
mbusc: mbus-controller@20000 {
compatible = "marvell,mbus-controller";
- reg = <0x20000 0x100>, <0x20180 0x20>;
+ reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
};
/* other children */
ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
mbusc: mbus-controller@20000 {
- reg = <0x20000 0x100>, <0x20180 0x20>;
+ reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
};
interrupt-controller@20000 {
--- /dev/null
+Broadcom Cygnus Clocks
+
+This binding uses the common clock binding:
+Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Currently various "fixed" clocks are declared for peripheral drivers that use
+the common clock framework to reference their core clocks. Proper support of
+these clocks will be added later
+
+Device tree example:
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <1>;
+ clock-frequency = <25000000>;
+ };
+
+ apb_clk: apb_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000000>;
+ };
+
+ periph_clk: periph_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <500000000>;
+ };
+ };
- reg: Address and length of the register set
- #clock-cells: Should be <1>
+Optional properties:
+- clocks: list of clock identifiers which are external input clocks to the
+ given clock controller. Please refer the next section to find
+ the input clocks for a given controller.
+- clock-names: list of names of clocks which are exteral input clocks to the
+ given clock controller.
+
+Input clocks for top clock controller:
+ - sxosc (external crystal oscillator 32KHz, recommended)
+ - fxosc (external crystal oscillator 24MHz, recommended)
+ - audio_ext
+ - enet_ext
+
The clock consumer should specify the desired clock by having the clock
ID in its "clocks" phandle cell. See include/dt-bindings/clock/vf610-clock.h
for the full list of VF610 clock IDs.
compatible = "fsl,vf610-ccm";
reg = <0x4006b000 0x1000>;
#clock-cells = <1>;
+ clocks = <&sxosc>, <&fxosc>;
+ clock-names = "sxosc", "fxosc";
};
uart1: serial@40028000 {
- compatible: It should be either "xlnx,axi-vdma-mm2s-channel" or
"xlnx,axi-vdma-s2mm-channel".
- interrupts: Should contain per channel VDMA interrupts.
-- xlnx,data-width: Should contain the stream data width, take values
+- xlnx,datawidth: Should contain the stream data width, take values
{32,64...1024}.
Optional child node properties:
--- /dev/null
+ltc2978
+
+Required properties:
+- compatible: should contain one of:
+ * "lltc,ltc2974"
+ * "lltc,ltc2977"
+ * "lltc,ltc2978"
+ * "lltc,ltc3880"
+ * "lltc,ltc3883"
+ * "lltc,ltm4676"
+- reg: I2C slave address
+
+Optional properties:
+- regulators: A node that houses a sub-node for each regulator controlled by
+ the device. Each sub-node is identified using the node's name, with valid
+ values listed below. The content of each sub-node is defined by the
+ standard binding for regulators; see regulator.txt.
+
+Valid names of regulators depend on number of supplies supported per device:
+ * ltc2974 : vout0 - vout3
+ * ltc2977 : vout0 - vout7
+ * ltc2978 : vout0 - vout7
+ * ltc3880 : vout0 - vout1
+ * ltc3883 : vout0
+ * ltm4676 : vout0 - vout1
+
+Example:
+ltc2978@5e {
+ compatible = "lltc,ltc2978";
+ reg = <0x5e>;
+ regulators {
+ vout0 {
+ regulator-name = "FPGA-2.5V";
+ };
+ vout2 {
+ regulator-name = "FPGA-1.5V";
+ };
+ };
+};
specified, default value is 0.
- samsung,i2c-max-bus-freq: Desired frequency in Hz of the bus. If not
specified, the default value in Hz is 100000.
+ - samsung,sysreg-phandle - handle to syscon used to control the system registers
Example:
infineon,slb9635tt Infineon SLB9635 (Soft-) I2C TPM (old protocol, max 100khz)
infineon,slb9645tt Infineon SLB9645 I2C TPM (new protocol, max 400khz)
isl,isl12057 Intersil ISL12057 I2C RTC Chip
+isil,isl29028 (deprecated, use isl)
+isl,isl29028 Intersil ISL29028 Ambient Light and Proximity Sensor
maxim,ds1050 5 Bit Programmable, Pulse-Width Modulator
maxim,max1237 Low-Power, 4-/12-Channel, 2-Wire Serial, 12-Bit ADCs
maxim,max6625 9-Bit/12-Bit Temperature Sensors with I²C-Compatible Serial Interface
Example:
interrupts-extended = <&intc1 5 1>, <&intc2 1 0>;
-A device node may contain either "interrupts" or "interrupts-extended", but not
-both. If both properties are present, then the operating system should log an
-error and use only the data in "interrupts".
-
2) Interrupt controller nodes
-----------------------------
--- /dev/null
+* Generic Mailbox Controller and client driver bindings
+
+Generic binding to provide a way for Mailbox controller drivers to
+assign appropriate mailbox channel to client drivers.
+
+* Mailbox Controller
+
+Required property:
+- #mbox-cells: Must be at least 1. Number of cells in a mailbox
+ specifier.
+
+Example:
+ mailbox: mailbox {
+ ...
+ #mbox-cells = <1>;
+ };
+
+
+* Mailbox Client
+
+Required property:
+- mboxes: List of phandle and mailbox channel specifiers.
+
+Optional property:
+- mbox-names: List of identifier strings for each mailbox channel
+ required by the client. The use of this property
+ is discouraged in favor of using index in list of
+ 'mboxes' while requesting a mailbox. Instead the
+ platforms may define channel indices, in DT headers,
+ to something legible.
+
+Example:
+ pwr_cntrl: power {
+ ...
+ mbox-names = "pwr-ctrl", "rpc";
+ mboxes = <&mailbox 0
+ &mailbox 1>;
+ };
--- /dev/null
+Device Tree bindings for MVEBU SDRAM controllers
+
+The Marvell EBU SoCs all have a SDRAM controller. The SDRAM controller
+differs from one SoC variant to another, but they also share a number
+of commonalities.
+
+For now, this Device Tree binding documentation only documents the
+Armada XP SDRAM controller.
+
+Required properties:
+
+ - compatible: for Armada XP, "marvell,armada-xp-sdram-controller"
+ - reg: a resource specifier for the register space, which should
+ include all SDRAM controller registers as per the datasheet.
+
+Example:
+
+sdramc@1400 {
+ compatible = "marvell,armada-xp-sdram-controller";
+ reg = <0x1400 0x500>;
+};
--- /dev/null
+NVIDIA Tegra Memory Controller device tree bindings
+===================================================
+
+Required properties:
+- compatible: Should be "nvidia,tegra<chip>-mc"
+- reg: Physical base address and length of the controller's registers.
+- clocks: Must contain an entry for each entry in clock-names.
+ See ../clocks/clock-bindings.txt for details.
+- clock-names: Must include the following entries:
+ - mc: the module's clock input
+- interrupts: The interrupt outputs from the controller.
+- #iommu-cells: Should be 1. The single cell of the IOMMU specifier defines
+ the SWGROUP of the master.
+
+This device implements an IOMMU that complies with the generic IOMMU binding.
+See ../iommu/iommu.txt for details.
+
+Example:
+--------
+
+ mc: memory-controller@0,70019000 {
+ compatible = "nvidia,tegra124-mc";
+ reg = <0x0 0x70019000 0x0 0x1000>;
+ clocks = <&tegra_car TEGRA124_CLK_MC>;
+ clock-names = "mc";
+
+ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
+
+ #iommu-cells = <1>;
+ };
+
+ sdhci@0,700b0000 {
+ compatible = "nvidia,tegra124-sdhci";
+ ...
+ iommus = <&mc TEGRA_SWGROUP_SDMMC1A>;
+ };
--- /dev/null
+Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver
+
+Required properties:
+ - compatible: value should be one of the following:
+ "atmel,sama5d3-hlcdc"
+ - reg: base address and size of the HLCDC device registers.
+ - clock-names: the name of the 3 clocks requested by the HLCDC device.
+ Should contain "periph_clk", "sys_clk" and "slow_clk".
+ - clocks: should contain the 3 clocks requested by the HLCDC device.
+ - interrupts: should contain the description of the HLCDC interrupt line
+
+The HLCDC IP exposes two subdevices:
+ - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt
+ - a Display Controller: see ../drm/atmel-hlcdc-dc.txt
+
+Example:
+
+ hlcdc: hlcdc@f0030000 {
+ compatible = "atmel,sama5d3-hlcdc";
+ reg = <0xf0030000 0x2000>;
+ clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
+ clock-names = "periph_clk","sys_clk", "slow_clk";
+ interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
+ status = "disabled";
+
+ hlcdc-display-controller {
+ compatible = "atmel,hlcdc-display-controller";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ hlcdc_panel_output: endpoint@0 {
+ reg = <0>;
+ remote-endpoint = <&panel_input>;
+ };
+ };
+ };
+
+ hlcdc_pwm: hlcdc-pwm {
+ compatible = "atmel,hlcdc-pwm";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lcd_pwm>;
+ #pwm-cells = <3>;
+ };
+ };
-BUCKn : for BUCKs, where n can lie in range 1 to 9.
example: BUCK1, BUCK5, BUCK9.
+ Regulators which can be turned off during system suspend:
+ -LDOn : 2, 6-8, 10-12, 14-16,
+ -BUCKn : 1-4.
+ Use standard regulator bindings for it ('regulator-off-in-suspend').
+
+
Example:
max77686@09 {
[*] refer Documentation/devicetree/bindings/regulator/regulator.txt
+- haptic : The MAX77693 haptic device utilises a PWM controlled motor to provide
+ users with tactile feedback. PWM period and duty-cycle are varied in
+ order to provide the approprite level of feedback.
+
+ Required properties:
+ - compatible : Must be "maxim,max77693-hpatic"
+ - haptic-supply : power supply for the haptic motor
+ [*] refer Documentation/devicetree/bindings/regulator/regulator.txt
+ - pwms : phandle to the physical PWM(Pulse Width Modulation) device.
+ PWM properties should be named "pwms". And number of cell is different
+ for each pwm device.
+ To get more informations, please refer to documentaion.
+ [*] refer Documentation/devicetree/bindings/pwm/pwm.txt
+
Example:
max77693@66 {
compatible = "maxim,max77693";
regulator-boot-on;
};
};
+
+ haptic {
+ compatible = "maxim,max77693-haptic";
+ haptic-supply = <&haptic_supply>;
+ pwms = <&pwm 0 40000 0>;
+ pwm-names = "haptic";
+ };
};
-* Samsung S2MPS11, S2MPS14 and S2MPU02 Voltage and Current Regulator
+* Samsung S2MPS11, S2MPS13, S2MPS14 and S2MPU02 Voltage and Current Regulator
The Samsung S2MPS11 is a multi-function device which includes voltage and
current regulators, RTC, charger controller and other sub-blocks. It is
addressed by the host system using different I2C slave addresses.
Required properties:
-- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps14-pmic"
- or "samsung,s2mpu02-pmic".
+- compatible: Should be "samsung,s2mps11-pmic" or "samsung,s2mps13-pmic"
+ or "samsung,s2mps14-pmic" or "samsung,s2mpu02-pmic".
- reg: Specifies the I2C slave address of the pmic block. It should be 0x66.
Optional properties:
- interrupts: Interrupt specifiers for interrupt sources.
Optional nodes:
-- clocks: s2mps11 and s5m8767 provide three(AP/CP/BT) buffered 32.768 KHz
- outputs, so to register these as clocks with common clock framework
+- clocks: s2mps11, s2mps13 and s5m8767 provide three(AP/CP/BT) buffered 32.768
+ KHz outputs, so to register these as clocks with common clock framework
instantiate a sub-node named "clocks". It uses the common clock binding
documented in :
[Documentation/devicetree/bindings/clock/clock-bindings.txt]
the clock which they consume.
Clock ID Devices
----------------------------------------------------------
- 32KhzAP 0 S2MPS11, S2MPS14, S5M8767
- 32KhzCP 1 S2MPS11, S5M8767
- 32KhzBT 2 S2MPS11, S2MPS14, S5M8767
+ 32KhzAP 0 S2MPS11, S2MPS13, S2MPS14, S5M8767
+ 32KhzCP 1 S2MPS11, S2MPS13, S5M8767
+ 32KhzBT 2 S2MPS11, S2MPS13, S2MPS14, S5M8767
- - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps14-clk",
- "samsung,s5m8767-clk"
+ - compatible: Should be one of: "samsung,s2mps11-clk", "samsung,s2mps13-clk",
+ "samsung,s2mps14-clk", "samsung,s5m8767-clk"
- regulators: The regulators of s2mps11 that have to be instantiated should be
included in a sub-node named 'regulators'. Regulator nodes included in this
- LDOn
- valid values for n are:
- S2MPS11: 1 to 38
+ - S2MPS13: 1 to 40
- S2MPS14: 1 to 25
- S2MPU02: 1 to 28
- Example: LDO1, LDO2, LDO28
- BUCKn
- valid values for n are:
- S2MPS11: 1 to 10
+ - S2MPS13: 1 to 10
- S2MPS14: 1 to 5
- S2MPU02: 1 to 7
- Example: BUCK1, BUCK2, BUCK9
specific extensions.
- "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420
specific extensions.
+ - "samsung,exynos7-dw-mshc": for controllers with Samsung Exynos7
+ specific extensions.
+ - "samsung,exynos7-dw-mshc-smu": for controllers with Samsung Exynos7
+ specific extensions having an SMU.
* samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface
unit (ciu) clock. This property is applicable only for Exynos5 SoC's and
--- /dev/null
+* Imagination specific extensions to the Synopsys Designware Mobile Storage
+ Host Controller
+
+The Synopsys designware mobile storage host controller is used to interface
+a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
+differences between the core Synopsys dw mshc controller properties described
+by synopsys-dw-mshc.txt and the properties used by the Imagination specific
+extensions to the Synopsys Designware Mobile Storage Host Controller.
+
+Required Properties:
+
+* compatible: should be
+ - "img,pistachio-dw-mshc": for Pistachio SoCs
+
+Example:
+
+ mmc@18142000 {
+ compatible = "img,pistachio-dw-mshc";
+ reg = <0x18142000 0x400>;
+ interrupts = <GIC_SHARED 39 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&system_clk>, <&sdhost_clk>;
+ clock-names = "biu", "ciu";
+
+ fifo-depth = <0x20>;
+ bus-width = <4>;
+ num-slots = <1>;
+ disable-wp;
+ };
* for "marvell,armada-380-sdhci", two register areas. The first one
for the SDHCI registers themselves, and the second one for the
AXI/Mbus bridge registers of the SDHCI unit.
+- clocks: Array of clocks required for SDHCI; requires at least one for
+ I/O clock.
+- clock-names: Array of names corresponding to clocks property; shall be
+ "io" for I/O clock and "core" for optional core clock.
Optional properties:
- mrvl,clk-delay-cycles: Specify a number of cycles to delay for tuning.
reg = <0xd4280800 0x800>;
bus-width = <8>;
interrupts = <27>;
+ clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
+ clock-names = "io", "core";
non-removable;
mrvl,clk-delay-cycles = <31>;
};
reg = <0xd8000 0x1000>, <0xdc000 0x100>;
interrupts = <0 25 0x4>;
clocks = <&gateclk 17>;
+ clock-names = "io";
mrvl,clk-delay-cycles = <0x1F>;
};
are supported on the device. Valid value for SMSC LAN91c111 are
1, 2 or 4. If it's omitted or invalid, the size would be 2 meaning
16-bit access only.
+- power-gpios: GPIO to control the PWRDWN pin
+- reset-gpios: GPIO to control the RESET pin
--- /dev/null
+* Nios II Processor Binding
+
+This binding specifies what properties available in the device tree
+representation of a Nios II Processor Core.
+
+Users can use sopc2dts tool for generating device tree sources (dts) from a
+Qsys system. See more detail in: http://www.alterawiki.com/wiki/Sopc2dts
+
+Required properties:
+
+- compatible: Compatible property value should be "altr,nios2-1.0".
+- reg: Contains CPU index.
+- interrupt-controller: Specifies that the node is an interrupt controller
+- #interrupt-cells: Specifies the number of cells needed to encode an
+ interrupt source, should be 1.
+- clock-frequency: Contains the clock frequency for CPU, in Hz.
+- dcache-line-size: Contains data cache line size.
+- icache-line-size: Contains instruction line size.
+- dcache-size: Contains data cache size.
+- icache-size: Contains instruction cache size.
+- altr,pid-num-bits: Specifies the number of bits to use to represent the process
+ identifier (PID).
+- altr,tlb-num-ways: Specifies the number of set-associativity ways in the TLB.
+- altr,tlb-num-entries: Specifies the number of entries in the TLB.
+- altr,tlb-ptr-sz: Specifies size of TLB pointer.
+- altr,has-mul: Specifies CPU hardware multipy support, should be 1.
+- altr,has-mmu: Specifies CPU support MMU support, should be 1.
+- altr,has-initda: Specifies CPU support initda instruction, should be 1.
+- altr,reset-addr: Specifies CPU reset address
+- altr,fast-tlb-miss-addr: Specifies CPU fast TLB miss exception address
+- altr,exception-addr: Specifies CPU exception address
+
+Optional properties:
+- altr,has-div: Specifies CPU hardware divide support
+- altr,implementation: Nios II core implementation, this should be "fast";
+
+Example:
+
+cpu@0x0 {
+ device_type = "cpu";
+ compatible = "altr,nios2-1.0";
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ clock-frequency = <125000000>;
+ dcache-line-size = <32>;
+ icache-line-size = <32>;
+ dcache-size = <32768>;
+ icache-size = <32768>;
+ altr,implementation = "fast";
+ altr,pid-num-bits = <8>;
+ altr,tlb-num-ways = <16>;
+ altr,tlb-num-entries = <128>;
+ altr,tlb-ptr-sz = <7>;
+ altr,has-div = <1>;
+ altr,has-mul = <1>;
+ altr,reset-addr = <0xc2800000>;
+ altr,fast-tlb-miss-addr = <0xc7fff400>;
+ altr,exception-addr = <0xd0000020>;
+ altr,has-initda = <1>;
+ altr,has-mmu = <1>;
+};
--- /dev/null
+Altera Timer
+
+Required properties:
+
+- compatible : should be "altr,timer-1.0"
+- reg : Specifies base physical address and size of the registers.
+- interrupt-parent: phandle of the interrupt controller
+- interrupts : Should contain the timer interrupt number
+- clock-frequency : The frequency of the clock that drives the counter, in Hz.
+
+Example:
+
+timer {
+ compatible = "altr,timer-1.0";
+ reg = <0x00400000 0x00000020>;
+ interrupt-parent = <&cpu>;
+ interrupts = <11>;
+ clock-frequency = <125000000>;
+};
Open Firmware Recommended Practice: Interrupt Mapping
http://www.openfirmware.org/1275/practice/imap/imap0_9d.pdf
+
+Additionally to the properties specified in the above standards a host bridge
+driver implementation may support the following properties:
+
+- linux,pci-domain:
+ If present this property assigns a fixed PCI domain number to a host bridge,
+ otherwise an unstable (across boots) unique number will be assigned.
+ It is required to either not set this property at all or set it for all
+ host bridges in the system, otherwise potentially conflicting domain numbers
+ may be assigned to root buses behind different host bridges. The domain
+ number for each host bridge in the system must be unique.
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
-TZ1090-PDC's pin configuration nodes act as a container for an abitrary number
+TZ1090-PDC's pin configuration nodes act as a container for an arbitrary number
of subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those pin(s)/group(s), and various pin configuration
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
-TZ1090's pin configuration nodes act as a container for an abitrary number of
+TZ1090's pin configuration nodes act as a container for an arbitrary number of
subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those pin(s)/group(s), and various pin configuration
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
-Lantiq's pin configuration nodes act as a container for an abitrary number of
+Lantiq's pin configuration nodes act as a container for an arbitrary number of
subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those group(s), and two pin configuration parameters:
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
-Lantiq's pin configuration nodes act as a container for an abitrary number of
+Lantiq's pin configuration nodes act as a container for an arbitrary number of
subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those group(s), and two pin configuration parameters:
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
-Tegra's pin configuration nodes act as a container for an abitrary number of
+Tegra's pin configuration nodes act as a container for an arbitrary number of
subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those pin(s)/group(s), and various pin configuration
Please refer to pinctrl-bindings.txt in this directory for details of the common
pinctrl bindings used by client devices.
-SiRFprimaII's pinmux nodes act as a container for an abitrary number of subnodes.
+SiRFprimaII's pinmux nodes act as a container for an arbitrary number of subnodes.
Each of these subnodes represents some desired configuration for a group of pins.
Required subnode-properties:
Please refer to pinctrl-bindings.txt in this directory for details of the common
pinctrl bindings used by client devices.
-SPEAr's pinmux nodes act as a container for an abitrary number of subnodes. Each
+SPEAr's pinmux nodes act as a container for an arbitrary number of subnodes. Each
of these subnodes represents muxing for a pin, a group, or a list of pins or
groups.
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
-Qualcomm's pin configuration nodes act as a container for an abitrary number of
+Qualcomm's pin configuration nodes act as a container for an arbitrary number of
subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those pin(s)/group(s), and various pin configuration
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
-The pin configuration nodes act as a container for an abitrary number of
+The pin configuration nodes act as a container for an arbitrary number of
subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those pin(s)/group(s), and various pin configuration
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
-Qualcomm's pin configuration nodes act as a container for an abitrary number of
+Qualcomm's pin configuration nodes act as a container for an arbitrary number of
subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those pin(s)/group(s), and various pin configuration
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
-The pin configuration nodes act as a container for an abitrary number of
+The pin configuration nodes act as a container for an arbitrary number of
subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those pin(s)/group(s), and various pin configuration
common pinctrl bindings used by client devices, including the meaning of the
phrase "pin configuration node".
-Qualcomm's pin configuration nodes act as a container for an abitrary number of
+Qualcomm's pin configuration nodes act as a container for an arbitrary number of
subnodes. Each of these subnodes represents some desired configuration for a
pin, a group, or a list of pins or groups. This configuration can include the
mux function to select on those pin(s)/group(s), and various pin configuration
--- /dev/null
+* Generic system power control capability
+
+Power-management integrated circuits or miscellaneous hardware components are
+sometimes able to control the system power. The device driver associated with these
+components might need to define this capability, which tells the kernel that
+it can be used to switch off the system. The corresponding device must have the
+standard property "system-power-controller" in its device node. This property
+marks the device as able to control the system power. In order to test if this
+property is found programmatically, use the helper function
+"of_device_is_system_power_controller" from of.h .
+
+Example:
+
+act8846: act8846@5 {
+ compatible = "active-semi,act8846";
+ status = "okay";
+ system-power-controller;
+}
--- /dev/null
+i.mx6 Poweroff Driver
+
+SNVS_LPCR in SNVS module can power off the whole system by pull
+PMIC_ON_REQ low if PMIC_ON_REQ is connected with external PMIC.
+If you don't want to use PMIC_ON_REQ as power on/off control,
+please set status='disabled' to disable this driver.
+
+Required Properties:
+-compatible: "fsl,sec-v4.0-poweroff"
+-reg: Specifies the physical address of the SNVS_LPCR register
+
+Example:
+ snvs@020cc000 {
+ compatible = "fsl,sec-v4.0-mon", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x020cc000 0x4000>;
+ .....
+ snvs_poweroff: snvs-poweroff@38 {
+ compatible = "fsl,sec-v4.0-poweroff";
+ reg = <0x38 0x4>;
+ };
+ }
Freescale FlexTimer Module (FTM) PWM controller
+The same FTM PWM device can have a different endianness on different SoCs. The
+device tree provides a property to describing this so that an operating system
+device driver can handle all variants of the device. Refer to the table below
+for the endianness of the FTM PWM block as integrated into the existing SoCs:
+
+ SoC | FTM-PWM endianness
+ --------+-------------------
+ Vybrid | LE
+ LS1 | BE
+ LS2 | LE
+
+Please see ../regmap/regmap.txt for more detail about how to specify endian
+modes in device tree.
+
+
Required properties:
- compatible: Should be "fsl,vf610-ftm-pwm".
- reg: Physical base address and length of the controller's registers
- pinctrl-names: Must contain a "default" entry.
- pinctrl-NNN: One property must exist for each entry in pinctrl-names.
See pinctrl/pinctrl-bindings.txt for details of the property values.
-
+- big-endian: Boolean property, required if the FTM PWM registers use a big-
+ endian rather than little-endian layout.
Example:
<&clks VF610_CLK_FTM0_EXT_FIX_EN>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm0_1>;
+ big-endian;
};
"rockchip,vop-pwm": found integrated in VOP on RK3288 SoC
- reg: physical base address and length of the controller's registers
- clocks: phandle and clock specifier of the PWM reference clock
- - #pwm-cells: should be 2. See pwm.txt in this directory for a
- description of the cell format.
+ - #pwm-cells: must be 2 (rk2928) or 3 (rk3288). See pwm.txt in this directory
+ for a description of the cell format.
Example:
- compatible: "active-semi,act8846" or "active-semi,act8865"
- reg: I2C slave address
+Optional properties:
+- system-power-controller: Telling whether or not this pmic is controlling
+ the system power. See Documentation/devicetree/bindings/power/power-controller.txt .
+
Any standard regulator properties can be used to configure the single regulator.
The valid names for regulators are:
example: LDO1, LDO2, LDO35.
-BUCKn : for BUCKs, where n can lie in range 1 to 10.
example: BUCK1, BUCK5, BUCK10.
+
+The max77802 regulator supports two different operating modes: Normal and Low
+Power Mode. Some regulators support the modes to be changed at startup or by
+the consumers during normal operation while others only support to change the
+mode during system suspend. The standard regulator suspend states binding can
+be used to configure the regulator operating mode.
+
+The regulators that support the standard "regulator-initial-mode" property,
+changing their mode during normal operation are: LDOs 1, 3, 20 and 21.
+
+The possible values for "regulator-initial-mode" and "regulator-mode" are:
+ 1: Normal regulator voltage output mode.
+ 3: Low Power which reduces the quiescent current down to only 1uA
+
+The list of valid modes are defined in the dt-bindings/clock/maxim,max77802.h
+header and can be included by device tree source files.
+
+The standard "regulator-mode" property can only be used for regulators that
+support changing their mode to Low Power Mode during suspend. These regulators
+are: BUCKs 2-4 and LDOs 1-35. Also, it only takes effect if the regulator has
+been enabled for the given suspend state using "regulator-on-in-suspend" and
+has not been disabled for that state using "regulator-off-in-suspend".
+
Example:
max77802@09 {
#size-cells = <0>;
regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "vdd_1v0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-initial-mode = <MAX77802_OPMODE_LP>;
+ };
+
ldo11_reg: LDO11 {
regulator-name = "vdd_ldo11";
regulator-min-microvolt = <1900000>;
regulator-max-microvolt = <1900000>;
regulator-always-on;
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-mode = <MAX77802_OPMODE_LP>;
+ };
};
buck1_reg: BUCK1 {
design requires. This property describes the total system ramp time
required due to the combination of internal ramping of the regulator itself,
and board design issues such as trace capacitance and load on the supply.
+- regulator-state-mem sub-root node for Suspend-to-RAM mode
+ : suspend to memory, the device goes to sleep, but all data stored in memory,
+ only some external interrupt can wake the device.
+- regulator-state-disk sub-root node for Suspend-to-DISK mode
+ : suspend to disk, this state operates similarly to Suspend-to-RAM,
+ but includes a final step of writing memory contents to disk.
+- regulator-state-[mem/disk] node has following common properties:
+ - regulator-on-in-suspend: regulator should be on in suspend state.
+ - regulator-off-in-suspend: regulator should be off in suspend state.
+ - regulator-suspend-microvolt: regulator should be set to this voltage
+ in suspend.
+ - regulator-mode: operating mode in the given suspend state.
+ The set of possible operating modes depends on the capabilities of
+ every hardware so the valid modes are documented on each regulator
+ device tree binding document.
+- regulator-initial-mode: initial operating mode. The set of possible operating
+ modes depends on the capabilities of every hardware so each device binding
+ documentation explains which values the regulator supports.
Deprecated properties:
- regulator-compatible: If a regulator chip contains multiple
regulator-max-microvolt = <2500000>;
regulator-always-on;
vin-supply = <&vin>;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
};
Regulator Consumers:
SKY81452 voltage regulator
Required properties:
+- regulator node named lout.
- any required generic properties defined in regulator.txt
Optional properties:
Example:
regulator {
- /* generic regulator properties */
- regulator-name = "touch_en";
- regulator-min-microvolt = <4500000>;
- regulator-max-microvolt = <8000000>;
+ lout {
+ regulator-name = "sky81452-lout";
+ regulator-min-microvolt = <4500000>;
+ regulator-max-microvolt = <8000000>;
+ };
};
--- /dev/null
+STMicroelectronics STi family Sysconfig Picophy SoftReset Controller
+=============================================================================
+
+This binding describes a reset controller device that is used to enable and
+disable on-chip PicoPHY USB2 phy(s) using "softreset" control bits found in
+the STi family SoC system configuration registers.
+
+The actual action taken when softreset is asserted is hardware dependent.
+However, when asserted it may not be possible to access the hardware's
+registers and after an assert/deassert sequence the hardware's previous state
+may no longer be valid.
+
+Please refer to Documentation/devicetree/bindings/reset/reset.txt
+for common reset controller binding usage.
+
+Required properties:
+- compatible: Should be "st,stih407-picophyreset"
+- #reset-cells: 1, see below
+
+Example:
+
+ picophyreset: picophyreset-controller {
+ compatible = "st,stih407-picophyreset";
+ #reset-cells = <1>;
+ };
+
+Specifying picophyreset control of devices
+=======================================
+
+Device nodes should specify the reset channel required in their "resets"
+property, containing a phandle to the picophyreset device node and an
+index specifying which channel to use, as described in
+Documentation/devicetree/bindings/reset/reset.txt.
+
+Example:
+
+ usb2_picophy0: usbpicophy@0 {
+ resets = <&picophyreset STIH407_PICOPHY0_RESET>;
+ };
+
+Macro definitions for the supported reset channels can be found in:
+include/dt-bindings/reset-controller/stih407-resets.h
--- /dev/null
+Atmel AT91SAM9260 Real Time Timer
+
+Required properties:
+- compatible: should be: "atmel,at91sam9260-rtt"
+- reg: should encode the memory region of the RTT controller
+- interrupts: rtt alarm/event interrupt
+- clocks: should contain the 32 KHz slow clk that will drive the RTT block.
+- atmel,rtt-rtc-time-reg: should encode the GPBR register used to store
+ the time base when the RTT is used as an RTC.
+ The first cell should point to the GPBR node and the second one
+ encode the offset within the GPBR block (or in other words, the
+ GPBR register used to store the time base).
+
+
+Example:
+
+rtt@fffffd20 {
+ compatible = "atmel,at91sam9260-rtt";
+ reg = <0xfffffd20 0x10>;
+ interrupts = <1 4 7>;
+ clocks = <&clk32k>;
+ atmel,rtt-rtc-time-reg = <&gpbr 0x0>;
+};
- clocks : the clock provider of SYS_MCLK
+- VDDA-supply : the regulator provider of VDDA
+
+- VDDIO-supply: the regulator provider of VDDIO
+
+Optional properties:
+
+- VDDD-supply : the regulator provider of VDDD
+
Example:
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks 150>;
+ VDDA-supply = <®_3p3v>;
+ VDDIO-supply = <®_3p3v>;
};
devicetree@vger.kernel.org
+ 3) The Documentation/ portion of the patch should come in the series before
+ the code implementing the binding.
+
II. For kernel maintainers
1) If you aren't comfortable reviewing a given binding, reply to it and ask
* Temperature Monitor (TEMPMON) on Freescale i.MX SoCs
Required properties:
-- compatible : "fsl,imx6q-thermal"
+- compatible : "fsl,imx6q-tempmon" for i.MX6Q, "fsl,imx6sx-tempmon" for i.MX6SX.
+ i.MX6SX has two more IRQs than i.MX6Q, one is IRQ_LOW and the other is IRQ_PANIC,
+ when temperature is below than low threshold, IRQ_LOW will be triggered, when temperature
+ is higher than panic threshold, system will auto reboot by SRC module.
- fsl,tempmon : phandle pointer to system controller that contains TEMPMON
control registers, e.g. ANATOP on imx6q.
- fsl,tempmon-data : phandle pointer to fuse controller that contains TEMPMON
- "renesas,thermal-r8a73a4" (R-Mobile AP6)
- "renesas,thermal-r8a7779" (R-Car H1)
- "renesas,thermal-r8a7790" (R-Car H2)
- - "renesas,thermal-r8a7791" (R-Car M2)
+ - "renesas,thermal-r8a7791" (R-Car M2-W)
+ - "renesas,thermal-r8a7792" (R-Car V2H)
+ - "renesas,thermal-r8a7793" (R-Car M2-N)
+ - "renesas,thermal-r8a7794" (R-Car E2)
- reg : Address range of the thermal registers.
The 1st reg will be recognized as common register
if it has "interrupts".
---------------------------------------
Required properties:
-- compatible: Should be either "marvell,armada-370-timer" or
- "marvell,armada-xp-timer" as appropriate.
+- compatible: Should be one of the following
+ "marvell,armada-370-timer",
+ "marvell,armada-375-timer",
+ "marvell,armada-xp-timer".
- interrupts: Should contain the list of Global Timer interrupts and
then local timer interrupts
- reg: Should contain location and length for timers register. First
Clocks required for compatible = "marvell,armada-370-timer":
- clocks : Must contain a single entry describing the clock input
-Clocks required for compatible = "marvell,armada-xp-timer":
+Clocks required for compatibles = "marvell,armada-xp-timer",
+ "marvell,armada-375-timer":
- clocks : Must contain an entry for each entry in clock-names.
- clock-names : Must include the following entries:
"nbclk" (L2/coherency fabric clock),
-* Renesas R-Car Multi-Function Timer Pulse Unit 2 (MTU2)
+* Renesas Multi-Function Timer Pulse Unit 2 (MTU2)
The MTU2 is a multi-purpose, multi-channel timer/counter with configurable
clock inputs and programmable compare match.
-* Renesas R-Car Timer Unit (TMU)
+* Renesas R-Mobile/R-Car Timer Unit (TMU)
The TMU is a 32-bit timer/counter with configurable clock inputs and
programmable compare match.
Required Properties:
- compatible: must contain one or more of the following:
+ - "renesas,tmu-r8a7740" for the r8a7740 TMU
+ - "renesas,tmu-r8a7778" for the r8a7778 TMU
- "renesas,tmu-r8a7779" for the r8a7779 TMU
- "renesas,tmu" for any TMU.
This is a fallback for the above renesas,tmu-* entries
chrp Common Hardware Reference Platform
chunghwa Chunghwa Picture Tubes Ltd.
cirrus Cirrus Logic, Inc.
+cnm Chips&Media, Inc.
cortina Cortina Systems, Inc.
crystalfontz Crystalfontz America, Inc.
dallas Maxim Integrated Products (formerly Dallas Semiconductor)
davicom DAVICOM Semiconductor, Inc.
denx Denx Software Engineering
digi Digi International Inc.
+digilent Diglent, Inc.
dlg Dialog Semiconductor
dlink D-Link Corporation
dmo Data Modul AG
intel Intel Corporation
intercontrol Inter Control Group
isee ISEE 2007 S.L.
+isil Intersil (deprecated, use isl)
isl Intersil
karo Ka-Ro electronics GmbH
keymile Keymile GmbH
marvell Marvell Technology Group Ltd.
maxim Maxim Integrated Products
mediatek MediaTek Inc.
+merrii Merrii Technology Co., Ltd.
micrel Micrel Inc.
microchip Microchip Technology Inc.
+micron Micron Technology Inc.
mitsubishi Mitsubishi Electric Corporation
mosaixtech Mosaix Technologies, Inc.
moxa Moxa
ricoh Ricoh Co. Ltd.
rockchip Fuzhou Rockchip Electronics Co., Ltd
samsung Samsung Semiconductor
+sandisk Sandisk Corporation
sbs Smart Battery System
schindler Schindler
seagate Seagate Technology PLC
sirf SiRF Technology, Inc.
sitronix Sitronix Technology Corporation
smsc Standard Microsystems Corporation
-snps Synopsys, Inc.
+snps Synopsys, Inc.
solidrun SolidRun
sony Sony Corporation
spansion Spansion Inc.
ste ST-Ericsson
stericsson ST-Ericsson
synology Synology, Inc.
+tbs TBS Technologies
thine THine Electronics, Inc.
ti Texas Instruments
tlm Trusted Logic Mobility
--- /dev/null
+* OMAP HDQ One wire bus master controller
+
+Required properties:
+- compatible : should be "ti,omap3-1w"
+- reg : Address and length of the register set for the device
+- interrupts : interrupt line.
+- ti,hwmods : "hdq1w"
+
+Example:
+
+- From omap3.dtsi
+ hdqw1w: 1w@480b2000 {
+ compatible = "ti,omap3-1w";
+ reg = <0x480b2000 0x1000>;
+ interrupts = <58>;
+ ti,hwmods = "hdq1w";
+ };
--- /dev/null
+Zynq Watchdog Device Tree Bindings
+-------------------------------------------
+
+Required properties:
+- compatible : Should be "cdns,wdt-r1p2".
+- clocks : This is pclk (APB clock).
+- interrupts : This is wd_irq - watchdog timeout interrupt.
+- interrupt-parent : Must be core interrupt controller.
+
+Optional properties
+- reset-on-timeout : If this property exists, then a reset is done
+ when watchdog times out.
+- timeout-sec : Watchdog timeout value (in seconds).
+
+Example:
+ watchdog@f8005000 {
+ compatible = "cdns,wdt-r1p2";
+ clocks = <&clkc 45>;
+ interrupt-parent = <&intc>;
+ interrupts = <0 9 1>;
+ reg = <0xf8005000 0x1000>;
+ reset-on-timeout;
+ timeout-sec = <10>;
+ };
Optional property:
- big-endian: If present the watchdog device's registers are implemented
- in big endian mode, otherwise in little mode.
+ in big endian mode, otherwise in native mode(same with CPU), for more
+ detail please see: Documentation/devicetree/bindings/regmap/regmap.txt.
Examples:
- reg : A third entry is mandatory and should contain the
shared mask/unmask RSTOUT address.
+Clocks required for compatibles = "marvell,orion-wdt",
+ "marvell,armada-370-wdt":
+- clocks : Must contain a single entry describing the clock input
+
+Clocks required for compatibles = "marvell,armada-xp-wdt"
+ "marvell,armada-375-wdt"
+ "marvell,armada-380-wdt":
+- clocks : Must contain an entry for each entry in clock-names.
+- clock-names : Must include the following entries:
+ "nbclk" (L2/coherency fabric clock),
+ "fixed" (Reference 25 MHz fixed-clock).
+
Optional properties:
- interrupts : Contains the IRQ for watchdog expiration
interrupts = <3>;
timeout-sec = <10>;
status = "okay";
+ clocks = <&gate_clk 7>;
};
--- /dev/null
+Meson SoCs Watchdog timer
+
+Required properties:
+
+- compatible : should be "amlogic,meson6-wdt"
+- reg : Specifies base physical address and size of the registers.
+
+Example:
+
+wdt: watchdog@c1109900 {
+ compatible = "amlogic,meson6-wdt";
+ reg = <0xc1109900 0x8>;
+};
--- /dev/null
+Qualcomm Krait Processor Sub-system (KPSS) Watchdog
+---------------------------------------------------
+
+Required properties :
+- compatible : shall contain only one of the following:
+
+ "qcom,kpss-wdt-msm8960"
+ "qcom,kpss-wdt-apq8064"
+ "qcom,kpss-wdt-ipq8064"
+
+- reg : shall contain base register location and length
+- clocks : shall contain the input clock
+
+Optional properties :
+- timeout-sec : shall contain the default watchdog timeout in seconds,
+ if unset, the default timeout is 30 seconds
+
+Example:
+ watchdog@208a038 {
+ compatible = "qcom,kpss-wdt-ipq8064";
+ reg = <0x0208a038 0x40>;
+ clocks = <&sleep_clk>;
+ timeout-sec = <10>;
+ };
(a) "samsung,s3c2410-wdt" for Exynos4 and previous SoCs
(b) "samsung,exynos5250-wdt" for Exynos5250
(c) "samsung,exynos5420-wdt" for Exynos5420
+ (c) "samsung,exynos7-wdt" for Exynos7
- reg : base physical address of the controller and length of memory mapped
region.
struct file *, unsigned open_flag,
umode_t create_mode, int *opened);
int (*tmpfile) (struct inode *, struct dentry *, umode_t);
+ int (*dentry_open)(struct dentry *, struct file *, const struct cred *);
locking rules:
all may block
update_time: no
atomic_open: yes
tmpfile: no
+dentry_open: no
Additionally, ->rmdir(), ->unlink() and ->rename() have ->i_mutex on
victim.
--- /dev/null
+Written by: Neil Brown <neilb@suse.de>
+
+Overlay Filesystem
+==================
+
+This document describes a prototype for a new approach to providing
+overlay-filesystem functionality in Linux (sometimes referred to as
+union-filesystems). An overlay-filesystem tries to present a
+filesystem which is the result over overlaying one filesystem on top
+of the other.
+
+The result will inevitably fail to look exactly like a normal
+filesystem for various technical reasons. The expectation is that
+many use cases will be able to ignore these differences.
+
+This approach is 'hybrid' because the objects that appear in the
+filesystem do not all appear to belong to that filesystem. In many
+cases an object accessed in the union will be indistinguishable
+from accessing the corresponding object from the original filesystem.
+This is most obvious from the 'st_dev' field returned by stat(2).
+
+While directories will report an st_dev from the overlay-filesystem,
+all non-directory objects will report an st_dev from the lower or
+upper filesystem that is providing the object. Similarly st_ino will
+only be unique when combined with st_dev, and both of these can change
+over the lifetime of a non-directory object. Many applications and
+tools ignore these values and will not be affected.
+
+Upper and Lower
+---------------
+
+An overlay filesystem combines two filesystems - an 'upper' filesystem
+and a 'lower' filesystem. When a name exists in both filesystems, the
+object in the 'upper' filesystem is visible while the object in the
+'lower' filesystem is either hidden or, in the case of directories,
+merged with the 'upper' object.
+
+It would be more correct to refer to an upper and lower 'directory
+tree' rather than 'filesystem' as it is quite possible for both
+directory trees to be in the same filesystem and there is no
+requirement that the root of a filesystem be given for either upper or
+lower.
+
+The lower filesystem can be any filesystem supported by Linux and does
+not need to be writable. The lower filesystem can even be another
+overlayfs. The upper filesystem will normally be writable and if it
+is it must support the creation of trusted.* extended attributes, and
+must provide valid d_type in readdir responses, so NFS is not suitable.
+
+A read-only overlay of two read-only filesystems may use any
+filesystem type.
+
+Directories
+-----------
+
+Overlaying mainly involves directories. If a given name appears in both
+upper and lower filesystems and refers to a non-directory in either,
+then the lower object is hidden - the name refers only to the upper
+object.
+
+Where both upper and lower objects are directories, a merged directory
+is formed.
+
+At mount time, the two directories given as mount options "lowerdir" and
+"upperdir" are combined into a merged directory:
+
+ mount -t overlay overlay -olowerdir=/lower,upperdir=/upper,\
+workdir=/work /merged
+
+The "workdir" needs to be an empty directory on the same filesystem
+as upperdir.
+
+Then whenever a lookup is requested in such a merged directory, the
+lookup is performed in each actual directory and the combined result
+is cached in the dentry belonging to the overlay filesystem. If both
+actual lookups find directories, both are stored and a merged
+directory is created, otherwise only one is stored: the upper if it
+exists, else the lower.
+
+Only the lists of names from directories are merged. Other content
+such as metadata and extended attributes are reported for the upper
+directory only. These attributes of the lower directory are hidden.
+
+whiteouts and opaque directories
+--------------------------------
+
+In order to support rm and rmdir without changing the lower
+filesystem, an overlay filesystem needs to record in the upper filesystem
+that files have been removed. This is done using whiteouts and opaque
+directories (non-directories are always opaque).
+
+A whiteout is created as a character device with 0/0 device number.
+When a whiteout is found in the upper level of a merged directory, any
+matching name in the lower level is ignored, and the whiteout itself
+is also hidden.
+
+A directory is made opaque by setting the xattr "trusted.overlay.opaque"
+to "y". Where the upper filesystem contains an opaque directory, any
+directory in the lower filesystem with the same name is ignored.
+
+readdir
+-------
+
+When a 'readdir' request is made on a merged directory, the upper and
+lower directories are each read and the name lists merged in the
+obvious way (upper is read first, then lower - entries that already
+exist are not re-added). This merged name list is cached in the
+'struct file' and so remains as long as the file is kept open. If the
+directory is opened and read by two processes at the same time, they
+will each have separate caches. A seekdir to the start of the
+directory (offset 0) followed by a readdir will cause the cache to be
+discarded and rebuilt.
+
+This means that changes to the merged directory do not appear while a
+directory is being read. This is unlikely to be noticed by many
+programs.
+
+seek offsets are assigned sequentially when the directories are read.
+Thus if
+ - read part of a directory
+ - remember an offset, and close the directory
+ - re-open the directory some time later
+ - seek to the remembered offset
+
+there may be little correlation between the old and new locations in
+the list of filenames, particularly if anything has changed in the
+directory.
+
+Readdir on directories that are not merged is simply handled by the
+underlying directory (upper or lower).
+
+
+Non-directories
+---------------
+
+Objects that are not directories (files, symlinks, device-special
+files etc.) are presented either from the upper or lower filesystem as
+appropriate. When a file in the lower filesystem is accessed in a way
+the requires write-access, such as opening for write access, changing
+some metadata etc., the file is first copied from the lower filesystem
+to the upper filesystem (copy_up). Note that creating a hard-link
+also requires copy_up, though of course creation of a symlink does
+not.
+
+The copy_up may turn out to be unnecessary, for example if the file is
+opened for read-write but the data is not modified.
+
+The copy_up process first makes sure that the containing directory
+exists in the upper filesystem - creating it and any parents as
+necessary. It then creates the object with the same metadata (owner,
+mode, mtime, symlink-target etc.) and then if the object is a file, the
+data is copied from the lower to the upper filesystem. Finally any
+extended attributes are copied up.
+
+Once the copy_up is complete, the overlay filesystem simply
+provides direct access to the newly created file in the upper
+filesystem - future operations on the file are barely noticed by the
+overlay filesystem (though an operation on the name of the file such as
+rename or unlink will of course be noticed and handled).
+
+
+Non-standard behavior
+---------------------
+
+The copy_up operation essentially creates a new, identical file and
+moves it over to the old name. The new file may be on a different
+filesystem, so both st_dev and st_ino of the file may change.
+
+Any open files referring to this inode will access the old data and
+metadata. Similarly any file locks obtained before copy_up will not
+apply to the copied up file.
+
+On a file opened with O_RDONLY fchmod(2), fchown(2), futimesat(2) and
+fsetxattr(2) will fail with EROFS.
+
+If a file with multiple hard links is copied up, then this will
+"break" the link. Changes will not be propagated to other names
+referring to the same inode.
+
+Symlinks in /proc/PID/ and /proc/PID/fd which point to a non-directory
+object in overlayfs will not contain valid absolute paths, only
+relative paths leading up to the filesystem's root. This will be
+fixed in the future.
+
+Some operations are not atomic, for example a crash during copy_up or
+rename will leave the filesystem in an inconsistent state. This will
+be addressed in the future.
+
+Changes to underlying filesystems
+---------------------------------
+
+Offline changes, when the overlay is not mounted, are allowed to either
+the upper or the lower trees.
+
+Changes to the underlying filesystems while part of a mounted overlay
+filesystem are not allowed. If the underlying filesystem is changed,
+the behavior of the overlay is undefined, though it will not result in
+a crash or deadlock.
int (*atomic_open)(struct inode *, struct dentry *, struct file *,
unsigned open_flag, umode_t create_mode, int *opened);
int (*tmpfile) (struct inode *, struct dentry *, umode_t);
+ int (*dentry_open)(struct dentry *, struct file *, const struct cred *);
};
Again, all methods are called without any locks being held, unless
but instead uses bmap to find out where the blocks in the file
are and uses those addresses directly.
+ dentry_open: *WARNING: probably going away soon, do not use!* This is an
+ alternative to f_op->open(), the difference is that this method may open
+ a file not necessarily originating from the same filesystem as the one
+ i_op->open() was called on. It may be useful for stacking filesystems
+ which want to allow native I/O directly on underlying files.
+
invalidatepage: If a page has PagePrivate set, then invalidatepage
will be called when part or all of the page is to be removed
http://www.ti.com/product/tmp75
http://www.ti.com/product/tmp175
http://www.ti.com/product/tmp275
+ * NXP LM75B
+ Prefix: 'lm75b'
+ Addresses scanned: none
+ Datasheet: Publicly available at the NXP website
+ http://www.nxp.com/documents/data_sheet/LM75B.pdf
Author: Frodo Looijaard <frodol@dds.nl>
=====================
Supported chips:
+ * National Semiconductor / Texas Instruments LM95233
+ Addresses scanned: I2C 0x18, 0x2a, 0x2b
+ Datasheet: Publicly available at the Texas Instruments website
+ http://www.ti.com/product/lm95233
* National Semiconductor / Texas Instruments LM95234
Addresses scanned: I2C 0x18, 0x4d, 0x4e
Datasheet: Publicly available at the Texas Instruments website
Description
-----------
-LM95234 is an 11-bit digital temperature sensor with a 2-wire System Management
-Bus (SMBus) interface and TrueTherm technology that can very accurately monitor
-the temperature of four remote diodes as well as its own temperature.
-The four remote diodes can be external devices such as microprocessors,
-graphics processors or diode-connected 2N3904s. The LM95234's TruTherm
+LM95233 and LM95234 are 11-bit digital temperature sensors with a 2-wire
+System Management Bus (SMBus) interface and TrueTherm technology
+that can very accurately monitor the temperature of two (LM95233)
+or four (LM95234) remote diodes as well as its own temperature.
+The remote diodes can be external devices such as microprocessors,
+graphics processors or diode-connected 2N3904s. The chip's TruTherm
beta compensation technology allows sensing of 90 nm or 65 nm process
thermal diodes accurately.
==================
Supported chips:
- * National Semiconductor LM95245
+ * TI LM95235
+ Addresses scanned: I2C 0x18, 0x29, 0x4c
+ Datasheet: Publicly available at the TI website
+ http://www.ti.com/lit/ds/symlink/lm95235.pdf
+ * TI / National Semiconductor LM95245
Addresses scanned: I2C 0x18, 0x19, 0x29, 0x4c, 0x4d
- Datasheet: Publicly available at the National Semiconductor website
- http://www.national.com/mpf/LM/LM95245.html
+ Datasheet: Publicly available at the TI website
+ http://www.ti.com/lit/ds/symlink/lm95245.pdf
Author: Alexander Stein <alexander.stein@systec-electronic.com>
Description
-----------
-The LM95245 is an 11-bit digital temperature sensor with a 2-wire System
+LM95235 and LM95245 are 11-bit digital temperature sensors with a 2-wire System
Management Bus (SMBus) interface and TruTherm technology that can monitor
the temperature of a remote diode as well as its own temperature.
-The LM95245 can be used to very accurately monitor the temperature of
+The chips can be used to very accurately monitor the temperature of
external devices such as microprocessors.
All temperature values are given in millidegrees Celsius. Local temperature
=====================
Supported chips:
+ * Nuvoton NCT6102D/NCT6104D/NCT6106D
+ Prefix: 'nct6106'
+ Addresses scanned: ISA address retrieved from Super I/O registers
+ Datasheet: Available from the Nuvoton web site
* Nuvoton NCT5572D/NCT6771F/NCT6772F/NCT6775F/W83677HG-I
Prefix: 'nct6775'
Addresses scanned: ISA address retrieved from Super I/O registers
Datasheet: Available from Nuvoton upon request
- * Nuvoton NCT5577D/NCT6776D/NCT6776F
+ * Nuvoton NCT5573D/NCT5577D/NCT6776D/NCT6776F
Prefix: 'nct6776'
Addresses scanned: ISA address retrieved from Super I/O registers
Datasheet: Available from Nuvoton upon request
Prefix: 'nct6779'
Addresses scanned: ISA address retrieved from Super I/O registers
Datasheet: Available from Nuvoton upon request
+ * Nuvoton NCT6791D
+ Prefix: 'nct6791'
+ Addresses scanned: ISA address retrieved from Super I/O registers
+ Datasheet: Available from Nuvoton upon request
+ * Nuvoton NCT6792D
+ Prefix: 'nct6792'
+ Addresses scanned: ISA address retrieved from Super I/O registers
+ Datasheet: Available from Nuvoton upon request
Authors:
Guenter Roeck <linux@roeck-us.net>
--- /dev/null
+Kernel driver nct7802
+=====================
+
+Supported chips:
+ * Nuvoton NCT7802Y
+ Prefix: 'nct7802'
+ Addresses scanned: I2C 0x28..0x2f
+ Datasheet: Available from Nuvoton web site
+
+Authors:
+ Guenter Roeck <linux@roeck-us.net>
+
+Description
+-----------
+
+This driver implements support for the Nuvoton NCT7802Y hardware monitoring
+chip. NCT7802Y supports 6 temperature sensors, 5 voltage sensors, and 3 fan
+speed sensors.
+
+The chip also supports intelligent fan speed control. This functionality is
+not currently supported by the driver.
+
+Tested Boards and BIOS Versions
+-------------------------------
+
+The driver has been reported to work with the following boards and
+BIOS versions.
+
+Board BIOS version
+---------------------------------------------------------------
+Kontron COMe-bSC2 CHR2E934.001.GGO
+Kontron COMe-bIP2 CCR2E212
Prefix: 'tmp432'
Addresses scanned: I2C 0x4c, 0x4d
Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp432.html
+ * Texas Instruments TMP435
+ Prefix: 'tmp435'
+ Addresses scanned: I2C 0x37, 0x48 - 0x4f
+ Datasheet: http://focus.ti.com/docs/prod/folders/print/tmp435.html
Authors:
Hans de Goede <hdegoede@redhat.com>
-----------
This driver implements support for Texas Instruments TMP401, TMP411,
-TMP431, and TMP432 chips. These chips implement one or two remote and
-one local temperature sensors. Temperature is measured in degrees
+TMP431, TMP432 and TMP435 chips. These chips implement one or two remote
+and one local temperature sensors. Temperature is measured in degrees
Celsius. Resolution of the remote sensor is 0.0625 degree. Local
sensor resolution can be set to 0.5, 0.25, 0.125 or 0.0625 degree (not
supported by the driver so far, so using the default resolution of 0.5
7.2.1 Status packet
7.2.2 Head packet
7.2.3 Motion packet
+ 8. Trackpoint (for Hardware version 3 and 4)
+ 8.1 Registers
+ 8.2 Native relative mode 6 byte packet format
+ 8.2.1 Status Packet
1. Introduction
~~~~~~~~~~~~
-Currently the Linux Elantech touchpad driver is aware of two different
-hardware versions unimaginatively called version 1 and version 2. Version 1
-is found in "older" laptops and uses 4 bytes per packet. Version 2 seems to
-be introduced with the EeePC and uses 6 bytes per packet, and provides
-additional features such as position of two fingers, and width of the touch.
+Currently the Linux Elantech touchpad driver is aware of four different
+hardware versions unimaginatively called version 1,version 2, version 3
+and version 4. Version 1 is found in "older" laptops and uses 4 bytes per
+packet. Version 2 seems to be introduced with the EeePC and uses 6 bytes
+per packet, and provides additional features such as position of two fingers,
+and width of the touch. Hardware version 3 uses 6 bytes per packet (and
+for 2 fingers the concatenation of two 6 bytes packets) and allows tracking
+of up to 3 fingers. Hardware version 4 uses 6 bytes per packet, and can
+combine a status packet with multiple head or motion packets. Hardware version
+4 allows tracking up to 5 fingers.
+
+Some Hardware version 3 and version 4 also have a trackpoint which uses a
+separate packet format. It is also 6 bytes per packet.
The driver tries to support both hardware versions and should be compatible
with the Xorg Synaptics touchpad driver and its graphical configuration
utilities.
+Note that a mouse button is also associated with either the touchpad or the
+trackpoint when a trackpoint is available. Disabling the Touchpad in xorg
+(TouchPadOff=0) will also disable the buttons associated with the touchpad.
+
Additionally the operation of the touchpad can be altered by adjusting the
contents of some of its internal registers. These registers are represented
by the driver as sysfs entries under /sys/bus/serio/drivers/psmouse/serio?
2. Extra knobs
~~~~~~~~~~~
-Currently the Linux Elantech touchpad driver provides two extra knobs under
+Currently the Linux Elantech touchpad driver provides three extra knobs under
/sys/bus/serio/drivers/psmouse/serio? for the user.
* debug
data consistency checking can be done. For now checking is disabled by
default. Currently even turning it on will do nothing.
+* crc_enabled
+
+ Sets crc_enabled to 0/1. The name "crc_enabled" is the official name of
+ this integrity check, even though it is not an actual cyclic redundancy
+ check.
+
+ Depending on the state of crc_enabled, certain basic data integrity
+ verification is done by the driver on hardware version 3 and 4. The
+ driver will reject any packet that appears corrupted. Using this knob,
+ The state of crc_enabled can be altered with this knob.
+
+ Reading the crc_enabled value will show the active value. Echoing
+ "0" or "1" to this file will set the state to "0" or "1".
+
/////////////////////////////////////////////////////////////////////////////
3. Differentiating hardware versions
byte 0 ~ 2 for one finger
byte 3 ~ 5 for another
+
+
+8. Trackpoint (for Hardware version 3 and 4)
+ =========================================
+8.1 Registers
+ ~~~~~~~~~
+No special registers have been identified.
+
+8.2 Native relative mode 6 byte packet format
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+8.2.1 Status Packet
+ ~~~~~~~~~~~~~
+
+byte 0:
+ bit 7 6 5 4 3 2 1 0
+ 0 0 sx sy 0 M R L
+byte 1:
+ bit 7 6 5 4 3 2 1 0
+ ~sx 0 0 0 0 0 0 0
+byte 2:
+ bit 7 6 5 4 3 2 1 0
+ ~sy 0 0 0 0 0 0 0
+byte 3:
+ bit 7 6 5 4 3 2 1 0
+ 0 0 ~sy ~sx 0 1 1 0
+byte 4:
+ bit 7 6 5 4 3 2 1 0
+ x7 x6 x5 x4 x3 x2 x1 x0
+byte 5:
+ bit 7 6 5 4 3 2 1 0
+ y7 y6 y5 y4 y3 y2 y1 y0
+
+
+ x and y are written in two's complement spread
+ over 9 bits with sx/sy the relative top bit and
+ x7..x0 and y7..y0 the lower bits.
+ ~sx is the inverse of sx, ~sy is the inverse of sy.
+ The sign of y is opposite to what the input driver
+ expects for a relative movement
Format: {"off" | "on" | "skip[mbr]"}
efi= [EFI]
- Format: { "old_map" }
+ Format: { "old_map", "nochunk", "noruntime" }
old_map [X86-64]: switch to the old ioremap-based EFI
runtime services mapping. 32-bit still uses this one by
default.
+ nochunk: disable reading files in "chunks" in the EFI
+ boot stub, as chunking can cause problems with some
+ firmware implementations.
+ noruntime : disable EFI runtime services support
efi_no_storage_paranoia [EFI; X86]
Using this parameter you can use more than 50% of
i8042.noloop [HW] Disable the AUX Loopback command while probing
for the AUX port
i8042.nomux [HW] Don't check presence of an active multiplexing
- controller. Default: true.
+ controller
i8042.nopnp [HW] Don't use ACPIPnP / PnPBIOS to discover KBD/AUX
controllers
i8042.notimeout [HW] Ignore timeout condition signalled by controller
.cdrom .chs .ignore_cable are additional options
See Documentation/ide/ide.txt.
+ ide-generic.probe-mask= [HW] (E)IDE subsystem
+ Format: <int>
+ Probe mask for legacy ISA IDE ports. Depending on
+ platform up to 6 ports are supported, enabled by
+ setting corresponding bits in the mask to 1. The
+ default value is 0x0, which has a special meaning.
+ On systems that have PCI, it triggers scanning the
+ PCI bus for the first and the second port, which
+ are then probed. On systems without PCI the value
+ of 0x0 enables probing the two first ports as if it
+ was 0x3.
+
ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem
Claim all unknown PCI IDE storage controllers.
kmemleak= [KNL] Boot-time kmemleak enable/disable
Valid arguments: on, off
Default: on
+ Built with CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF=y,
+ the default is off.
kmemcheck= [X86] Boot-time kmemcheck enable/disable/one-shot mode
Valid arguments: 0, 1, 2
nodsp [SH] Disable hardware DSP at boot time.
- noefi [X86] Disable EFI runtime services support.
+ noefi Disable EFI runtime services support.
noexec [IA-64]
quiescent states. Units are jiffies, minimum
value is one, and maximum value is HZ.
+ rcutree.kthread_prio= [KNL,BOOT]
+ Set the SCHED_FIFO priority of the RCU
+ per-CPU kthreads (rcuc/N). This value is also
+ used for the priority of the RCU boost threads
+ (rcub/N). Valid values are 1-99 and the default
+ is 1 (the least-favored priority).
+
rcutree.rcu_nocb_leader_stride= [KNL]
Set the number of NOCB kthread groups, which
defaults to the square root of the number of
messages. Disable with a value less than or equal
to zero.
+ rcupdate.rcu_self_test= [KNL]
+ Run the RCU early boot self tests
+
+ rcupdate.rcu_self_test_bh= [KNL]
+ Run the RCU bh early boot self tests
+
+ rcupdate.rcu_self_test_sched= [KNL]
+ Run the RCU sched early boot self tests
+
rdinit= [KNL]
Format: <full_path>
Run specified binary instead of /init from the ramdisk,
e.g. base its process migration decisions on it.
Default is on.
+ topology_updates= [KNL, PPC, NUMA]
+ Format: {off}
+ Specify if the kernel should ignore (off)
+ topology updates sent by the hypervisor to this
+ LPAR.
+
tp720= [HW,PS2]
tpm_suspend_pcr=[HW,TPM]
usb-storage.delay_use=
[UMS] The delay in seconds before a new device is
- scanned for Logical Units (default 5).
+ scanned for Logical Units (default 1).
usb-storage.quirks=
[UMS] A list of quirks entries to supplement or
these actions are stored in an early log buffer. The size of this buffer
is configured via the CONFIG_DEBUG_KMEMLEAK_EARLY_LOG_SIZE option.
+If CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF are enabled, the kmemleak is
+disabled by default. Passing "kmemleak=on" on the kernel command
+line enables the function.
+
Basic Algorithm
---------------
--- /dev/null
+lglock - local/global locks for mostly local access patterns
+------------------------------------------------------------
+
+Origin: Nick Piggin's VFS scalability series introduced during
+ 2.6.35++ [1] [2]
+Location: kernel/locking/lglock.c
+ include/linux/lglock.h
+Users: currently only the VFS and stop_machine related code
+
+Design Goal:
+------------
+
+Improve scalability of globally used large data sets that are
+distributed over all CPUs as per_cpu elements.
+
+To manage global data structures that are partitioned over all CPUs
+as per_cpu elements but can be mostly handled by CPU local actions
+lglock will be used where the majority of accesses are cpu local
+reading and occasional cpu local writing with very infrequent
+global write access.
+
+
+* deal with things locally whenever possible
+ - very fast access to the local per_cpu data
+ - reasonably fast access to specific per_cpu data on a different
+ CPU
+* while making global action possible when needed
+ - by expensive access to all CPUs locks - effectively
+ resulting in a globally visible critical section.
+
+Design:
+-------
+
+Basically it is an array of per_cpu spinlocks with the
+lg_local_lock/unlock accessing the local CPUs lock object and the
+lg_local_lock_cpu/unlock_cpu accessing a remote CPUs lock object
+the lg_local_lock has to disable preemption as migration protection so
+that the reference to the local CPUs lock does not go out of scope.
+Due to the lg_local_lock/unlock only touching cpu-local resources it
+is fast. Taking the local lock on a different CPU will be more
+expensive but still relatively cheap.
+
+One can relax the migration constraints by acquiring the current
+CPUs lock with lg_local_lock_cpu, remember the cpu, and release that
+lock at the end of the critical section even if migrated. This should
+give most of the performance benefits without inhibiting migration
+though needs careful considerations for nesting of lglocks and
+consideration of deadlocks with lg_global_lock.
+
+The lg_global_lock/unlock locks all underlying spinlocks of all
+possible CPUs (including those off-line). The preemption disable/enable
+are needed in the non-RT kernels to prevent deadlocks like:
+
+ on cpu 1
+
+ task A task B
+ lg_global_lock
+ got cpu 0 lock
+ <<<< preempt <<<<
+ lg_local_lock_cpu for cpu 0
+ spin on cpu 0 lock
+
+On -RT this deadlock scenario is resolved by the arch_spin_locks in the
+lglocks being replaced by rt_mutexes which resolve the above deadlock
+by boosting the lock-holder.
+
+
+Implementation:
+---------------
+
+The initial lglock implementation from Nick Piggin used some complex
+macros to generate the lglock/brlock in lglock.h - they were later
+turned into a set of functions by Andi Kleen [7]. The change to functions
+was motivated by the presence of multiple lock users and also by them
+being easier to maintain than the generating macros. This change to
+functions is also the basis to eliminated the restriction of not
+being initializeable in kernel modules (the remaining problem is that
+locks are not explicitly initialized - see lockdep-design.txt)
+
+Declaration and initialization:
+-------------------------------
+
+ #include <linux/lglock.h>
+
+ DEFINE_LGLOCK(name)
+ or:
+ DEFINE_STATIC_LGLOCK(name);
+
+ lg_lock_init(&name, "lockdep_name_string");
+
+ on UP this is mapped to DEFINE_SPINLOCK(name) in both cases, note
+ also that as of 3.18-rc6 all declaration in use are of the _STATIC_
+ variant (and it seems that the non-static was never in use).
+ lg_lock_init is initializing the lockdep map only.
+
+Usage:
+------
+
+From the locking semantics it is a spinlock. It could be called a
+locality aware spinlock. lg_local_* behaves like a per_cpu
+spinlock and lg_global_* like a global spinlock.
+No surprises in the API.
+
+ lg_local_lock(*lglock);
+ access to protected per_cpu object on this CPU
+ lg_local_unlock(*lglock);
+
+ lg_local_lock_cpu(*lglock, cpu);
+ access to protected per_cpu object on other CPU cpu
+ lg_local_unlock_cpu(*lglock, cpu);
+
+ lg_global_lock(*lglock);
+ access all protected per_cpu objects on all CPUs
+ lg_global_unlock(*lglock);
+
+ There are no _trylock variants of the lglocks.
+
+Note that the lg_global_lock/unlock has to iterate over all possible
+CPUs rather than the actually present CPUs or a CPU could go off-line
+with a held lock [4] and that makes it very expensive. A discussion on
+these issues can be found at [5]
+
+Constraints:
+------------
+
+ * currently the declaration of lglocks in kernel modules is not
+ possible, though this should be doable with little change.
+ * lglocks are not recursive.
+ * suitable for code that can do most operations on the CPU local
+ data and will very rarely need the global lock
+ * lg_global_lock/unlock is *very* expensive and does not scale
+ * on UP systems all lg_* primitives are simply spinlocks
+ * in PREEMPT_RT the spinlock becomes an rt-mutex and can sleep but
+ does not change the tasks state while sleeping [6].
+ * in PREEMPT_RT the preempt_disable/enable in lg_local_lock/unlock
+ is downgraded to a migrate_disable/enable, the other
+ preempt_disable/enable are downgraded to barriers [6].
+ The deadlock noted for non-RT above is resolved due to rt_mutexes
+ boosting the lock-holder in this case which arch_spin_locks do
+ not do.
+
+lglocks were designed for very specific problems in the VFS and probably
+only are the right answer in these corner cases. Any new user that looks
+at lglocks probably wants to look at the seqlock and RCU alternatives as
+her first choice. There are also efforts to resolve the RCU issues that
+currently prevent using RCU in place of view remaining lglocks.
+
+Note on brlock history:
+-----------------------
+
+The 'Big Reader' read-write spinlocks were originally introduced by
+Ingo Molnar in 2000 (2.4/2.5 kernel series) and removed in 2003. They
+later were introduced by the VFS scalability patch set in 2.6 series
+again as the "big reader lock" brlock [2] variant of lglock which has
+been replaced by seqlock primitives or by RCU based primitives in the
+3.13 kernel series as was suggested in [3] in 2003. The brlock was
+entirely removed in the 3.13 kernel series.
+
+Link: 1 http://lkml.org/lkml/2010/8/2/81
+Link: 2 http://lwn.net/Articles/401738/
+Link: 3 http://lkml.org/lkml/2003/3/9/205
+Link: 4 https://lkml.org/lkml/2011/8/24/185
+Link: 5 http://lkml.org/lkml/2011/12/18/189
+Link: 6 https://www.kernel.org/pub/linux/kernel/projects/rt/
+ patch series - lglocks-rt.patch.patch
+Link: 7 http://lkml.org/lkml/2012/3/5/26
--- /dev/null
+ The Common Mailbox Framework
+ Jassi Brar <jaswinder.singh@linaro.org>
+
+ This document aims to help developers write client and controller
+drivers for the API. But before we start, let us note that the
+client (especially) and controller drivers are likely going to be
+very platform specific because the remote firmware is likely to be
+proprietary and implement non-standard protocol. So even if two
+platforms employ, say, PL320 controller, the client drivers can't
+be shared across them. Even the PL320 driver might need to accommodate
+some platform specific quirks. So the API is meant mainly to avoid
+similar copies of code written for each platform. Having said that,
+nothing prevents the remote f/w to also be Linux based and use the
+same api there. However none of that helps us locally because we only
+ever deal at client's protocol level.
+ Some of the choices made during implementation are the result of this
+peculiarity of this "common" framework.
+
+
+
+ Part 1 - Controller Driver (See include/linux/mailbox_controller.h)
+
+ Allocate mbox_controller and the array of mbox_chan.
+Populate mbox_chan_ops, except peek_data() all are mandatory.
+The controller driver might know a message has been consumed
+by the remote by getting an IRQ or polling some hardware flag
+or it can never know (the client knows by way of the protocol).
+The method in order of preference is IRQ -> Poll -> None, which
+the controller driver should set via 'txdone_irq' or 'txdone_poll'
+or neither.
+
+
+ Part 2 - Client Driver (See include/linux/mailbox_client.h)
+
+ The client might want to operate in blocking mode (synchronously
+send a message through before returning) or non-blocking/async mode (submit
+a message and a callback function to the API and return immediately).
+
+
+struct demo_client {
+ struct mbox_client cl;
+ struct mbox_chan *mbox;
+ struct completion c;
+ bool async;
+ /* ... */
+};
+
+/*
+ * This is the handler for data received from remote. The behaviour is purely
+ * dependent upon the protocol. This is just an example.
+ */
+static void message_from_remote(struct mbox_client *cl, void *mssg)
+{
+ struct demo_client *dc = container_of(mbox_client,
+ struct demo_client, cl);
+ if (dc->aysnc) {
+ if (is_an_ack(mssg)) {
+ /* An ACK to our last sample sent */
+ return; /* Or do something else here */
+ } else { /* A new message from remote */
+ queue_req(mssg);
+ }
+ } else {
+ /* Remote f/w sends only ACK packets on this channel */
+ return;
+ }
+}
+
+static void sample_sent(struct mbox_client *cl, void *mssg, int r)
+{
+ struct demo_client *dc = container_of(mbox_client,
+ struct demo_client, cl);
+ complete(&dc->c);
+}
+
+static void client_demo(struct platform_device *pdev)
+{
+ struct demo_client *dc_sync, *dc_async;
+ /* The controller already knows async_pkt and sync_pkt */
+ struct async_pkt ap;
+ struct sync_pkt sp;
+
+ dc_sync = kzalloc(sizeof(*dc_sync), GFP_KERNEL);
+ dc_async = kzalloc(sizeof(*dc_async), GFP_KERNEL);
+
+ /* Populate non-blocking mode client */
+ dc_async->cl.dev = &pdev->dev;
+ dc_async->cl.rx_callback = message_from_remote;
+ dc_async->cl.tx_done = sample_sent;
+ dc_async->cl.tx_block = false;
+ dc_async->cl.tx_tout = 0; /* doesn't matter here */
+ dc_async->cl.knows_txdone = false; /* depending upon protocol */
+ dc_async->async = true;
+ init_completion(&dc_async->c);
+
+ /* Populate blocking mode client */
+ dc_sync->cl.dev = &pdev->dev;
+ dc_sync->cl.rx_callback = message_from_remote;
+ dc_sync->cl.tx_done = NULL; /* operate in blocking mode */
+ dc_sync->cl.tx_block = true;
+ dc_sync->cl.tx_tout = 500; /* by half a second */
+ dc_sync->cl.knows_txdone = false; /* depending upon protocol */
+ dc_sync->async = false;
+
+ /* ASync mailbox is listed second in 'mboxes' property */
+ dc_async->mbox = mbox_request_channel(&dc_async->cl, 1);
+ /* Populate data packet */
+ /* ap.xxx = 123; etc */
+ /* Send async message to remote */
+ mbox_send_message(dc_async->mbox, &ap);
+
+ /* Sync mailbox is listed first in 'mboxes' property */
+ dc_sync->mbox = mbox_request_channel(&dc_sync->cl, 0);
+ /* Populate data packet */
+ /* sp.abc = 123; etc */
+ /* Send message to remote in blocking mode */
+ mbox_send_message(dc_sync->mbox, &sp);
+ /* At this point 'sp' has been sent */
+
+ /* Now wait for async chan to be done */
+ wait_for_completion(&dc_async->c);
+}
The set of accesses as seen by the memory system in the middle can be arranged
in 24 different combinations:
- STORE A=3, STORE B=4, x=LOAD A->3, y=LOAD B->4
- STORE A=3, STORE B=4, y=LOAD B->4, x=LOAD A->3
- STORE A=3, x=LOAD A->3, STORE B=4, y=LOAD B->4
- STORE A=3, x=LOAD A->3, y=LOAD B->2, STORE B=4
- STORE A=3, y=LOAD B->2, STORE B=4, x=LOAD A->3
- STORE A=3, y=LOAD B->2, x=LOAD A->3, STORE B=4
- STORE B=4, STORE A=3, x=LOAD A->3, y=LOAD B->4
+ STORE A=3, STORE B=4, y=LOAD A->3, x=LOAD B->4
+ STORE A=3, STORE B=4, x=LOAD B->4, y=LOAD A->3
+ STORE A=3, y=LOAD A->3, STORE B=4, x=LOAD B->4
+ STORE A=3, y=LOAD A->3, x=LOAD B->2, STORE B=4
+ STORE A=3, x=LOAD B->2, STORE B=4, y=LOAD A->3
+ STORE A=3, x=LOAD B->2, y=LOAD A->3, STORE B=4
+ STORE B=4, STORE A=3, y=LOAD A->3, x=LOAD B->4
STORE B=4, ...
...
and can thus result in four different combinations of values:
- x == 1, y == 2
- x == 1, y == 4
- x == 3, y == 2
- x == 3, y == 4
+ x == 2, y == 1
+ x == 2, y == 3
+ x == 4, y == 1
+ x == 4, y == 3
Furthermore, the stores committed by a CPU to the memory system may not be
identical, as noted earlier, the compiler could pull this store outside
of the 'if' statement.
+You must also be careful not to rely too much on boolean short-circuit
+evaluation. Consider this example:
+
+ q = ACCESS_ONCE(a);
+ if (a || 1 > 0)
+ ACCESS_ONCE(b) = 1;
+
+Because the second condition is always true, the compiler can transform
+this example as following, defeating control dependency:
+
+ q = ACCESS_ONCE(a);
+ ACCESS_ONCE(b) = 1;
+
+This example underscores the need to ensure that the compiler cannot
+out-guess your code. More generally, although ACCESS_ONCE() does force
+the compiler to actually emit code for a given load, it does not force
+the compiler to use the results.
+
Finally, control dependencies do -not- provide transitivity. This is
demonstrated by two related examples, with the initial values of
x and y both being zero:
Please refer to the PCI specification for more information on interactions
between PCI transactions.
- (*) readX_relaxed()
+ (*) readX_relaxed(), writeX_relaxed()
- These are similar to readX(), but are not guaranteed to be ordered in any
- way. Be aware that there is no I/O read barrier available.
+ These are similar to readX() and writeX(), but provide weaker memory
+ ordering guarantees. Specifically, they do not guarantee ordering with
+ respect to normal memory accesses (e.g. DMA buffers) nor do they guarantee
+ ordering with respect to LOCK or UNLOCK operations. If the latter is
+ required, an mmiowb() barrier can be used. Note that relaxed accesses to
+ the same peripheral are guaranteed to be ordered with respect to each
+ other.
(*) ioreadX(), iowriteX()
0 - disabled
1 - enabled
+fwmark_reflect - BOOLEAN
+ Controls the fwmark of kernel-generated IPv4 reply packets that are not
+ associated with a socket for example, TCP RSTs or ICMP echo replies).
+ If unset, these packets have a fwmark of zero. If set, they have the
+ fwmark of the packet they are replying to.
+ Default: 0
+
route/max_size - INTEGER
Maximum number of routes allowed in the kernel. Increase
this when using large numbers of interfaces and/or routes.
proxy_ndp - BOOLEAN
Do proxy ndp.
+fwmark_reflect - BOOLEAN
+ Controls the fwmark of kernel-generated IPv6 reply packets that are not
+ associated with a socket for example, TCP RSTs or ICMPv6 echo replies).
+ If unset, these packets have a fwmark of zero. If set, they have the
+ fwmark of the packet they are replying to.
+ Default: 0
+
conf/interface/*:
Change special settings per interface.
This option is implemented only for transmit timestamps. There, the
timestamp is always looped along with a struct sock_extended_err.
- The option modifies field ee_info to pass an id that is unique
+ The option modifies field ee_data to pass an id that is unique
among all possibly concurrently outstanding timestamp requests for
that socket. In practice, it is a monotonically increasing u32
(that wraps).
--- /dev/null
+Linux on the Nios II architecture
+=================================
+
+This is a port of Linux to Nios II (nios2) processor.
+
+In order to compile for Nios II, you need a version of GCC with support for the generic
+system call ABI. Please see this link for more information on how compiling and booting
+software for the Nios II platform:
+http://www.rocketboards.org/foswiki/Documentation/NiosIILinuxUserManual
+
+For reference, please see the following link:
+http://www.altera.com/literature/lit-nio2.jsp
+
+What is Nios II?
+================
+Nios II is a 32-bit embedded-processor architecture designed specifically for the
+Altera family of FPGAs. In order to support Linux, Nios II needs to be configured
+with MMU and hardware multiplier enabled.
+
+Nios II ABI
+===========
+Please refer to chapter "Application Binary Interface" in Nios II Processor Reference
+Handbook.
one of the parameters.
Two different PM QoS frameworks are available:
-1. PM QoS classes for cpu_dma_latency, network_latency, network_throughput.
+1. PM QoS classes for cpu_dma_latency, network_latency, network_throughput,
+memory_bandwidth.
2. the per-device PM QoS framework provides the API to manage the per-device latency
constraints and PM QoS flags.
* latency: usec
* timeout: usec
* throughput: kbs (kilo bit / sec)
+ * memory bandwidth: mbs (mega bit / sec)
1. PM QoS framework
# List of programs to build
-hostprogs-y := disable-tsc-ctxt-sw-stress-test disable-tsc-on-off-stress-test disable-tsc-test
+hostprogs-$(CONFIG_X86) := disable-tsc-ctxt-sw-stress-test disable-tsc-on-off-stress-test disable-tsc-test
# Tell kbuild to always build the programs
always := $(hostprogs-y)
--- /dev/null
+# PTP 1588 clock support - User space test program
+#
+# Copyright (C) 2010 OMICRON electronics GmbH
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+CC = $(CROSS_COMPILE)gcc
+INC = -I$(KBUILD_OUTPUT)/usr/include
+CFLAGS = -Wall $(INC)
+LDLIBS = -lrt
+PROGS = testptp
+
+all: $(PROGS)
+
+testptp: testptp.o
+
+clean:
+ rm -f testptp.o
+
+distclean: clean
+ rm -f $(PROGS)
my_ha->sas_ha.lldd_dev_found = my_dev_found;
my_ha->sas_ha.lldd_dev_gone = my_dev_gone;
- my_ha->sas_ha.lldd_max_execute_num = lldd_max_execute_num; (1)
-
- my_ha->sas_ha.lldd_queue_size = ha_can_queue;
my_ha->sas_ha.lldd_execute_task = my_execute_task;
my_ha->sas_ha.lldd_abort_task = my_abort_task;
return sas_register_ha(&my_ha->sas_ha);
}
-(1) This is normally a LLDD parameter, something of the
-lines of a task collector. What it tells the SAS Layer is
-whether the SAS layer should run in Direct Mode (default:
-value 0 or 1) or Task Collector Mode (value greater than 1).
-
-In Direct Mode, the SAS Layer calls Execute Task as soon as
-it has a command to send to the SDS, _and_ this is a single
-command, i.e. not linked.
-
-Some hardware (e.g. aic94xx) has the capability to DMA more
-than one task at a time (interrupt) from host memory. Task
-Collector Mode is an optional feature for HAs which support
-this in their hardware. (Again, it is completely optional
-even if your hardware supports it.)
-
-In Task Collector Mode, the SAS Layer would do _natural_
-coalescing of tasks and at the appropriate moment it would
-call your driver to DMA more than one task in a single HA
-interrupt. DMBS may want to use this by insmod/modprobe
-setting the lldd_max_execute_num to something greater than
-1.
-
(2) SAS 1.1 does not define I_T Nexus Reset TMF.
Events
The Execute Command SCSI RPC:
- int (*lldd_execute_task)(struct sas_task *, int num,
- unsigned long gfp_flags);
+ int (*lldd_execute_task)(struct sas_task *, gfp_t gfp_flags);
-Used to queue a task to the SAS LLDD. @task is the tasks to
-be executed. @num should be the number of tasks being
-queued at this function call (they are linked listed via
-task::list), @gfp_mask should be the gfp_mask defining the
-context of the caller.
+Used to queue a task to the SAS LLDD. @task is the task to be executed.
+@gfp_mask is the gfp_mask defining the context of the caller.
This function should implement the Execute Command SCSI RPC,
-or if you're sending a SCSI Task as linked commands, you
-should also use this function.
-That is, when lldd_execute_task() is called, the command(s)
+That is, when lldd_execute_task() is called, the command
go out on the transport *immediately*. There is *no*
queuing of any sort and at any level in a SAS LLDD.
-The use of task::list is two-fold, one for linked commands,
-the other discussed below.
-
-It is possible to queue up more than one task at a time, by
-initializing the list element of struct sas_task, and
-passing the number of tasks enlisted in this manner in num.
-
Returns: -SAS_QUEUE_FULL, -ENOMEM, nothing was queued;
0, the task(s) were queued.
-If you want to pass num > 1, then either
-A) you're the only caller of this function and keep track
- of what you've queued to the LLDD, or
-B) you know what you're doing and have a strategy of
- retrying.
-
-As opposed to queuing one task at a time (function call),
-batch queuing of tasks, by having num > 1, greatly
-simplifies LLDD code, sequencer code, and _hardware design_,
-and has some performance advantages in certain situations
-(DBMS).
-
-The LLDD advertises if it can take more than one command at
-a time at lldd_execute_task(), by setting the
-lldd_max_execute_num parameter (controlled by "collector"
-module parameter in aic94xx SAS LLDD).
-
-You should leave this to the default 1, unless you know what
-you're doing.
-
-This is a function of the LLDD, to which the SAS layer can
-cater to.
-
-int lldd_queue_size
- The host adapter's queue size. This is the maximum
-number of commands the lldd can have pending to domain
-devices on behalf of all upper layers submitting through
-lldd_execute_task().
-
-You really want to set this to something (much) larger than
-1.
-
-This _really_ has absolutely nothing to do with queuing.
-There is no queuing in SAS LLDDs.
-
struct sas_task {
dev -- the device this task is destined to
- list -- must be initialized (INIT_LIST_HEAD)
task_proto -- _one_ of enum sas_proto
scatter -- pointer to scatter gather list array
num_scatter -- number of elements in scatter
More up-to-date information can be found on:
http://open-osd.org
-Boaz Harrosh <bharrosh@panasas.com>
-Benny Halevy <bhalevy@panasas.com>
+Boaz Harrosh <ooo@electrozaur.com>
References
==========
scsi_scan_host() -------+
|
slave_alloc()
- slave_configure() --> scsi_adjust_queue_depth()
+ slave_configure() --> scsi_change_queue_depth()
|
slave_alloc()
slave_configure()
------------------------------------------------------------
If the LLD wants to adjust the default queue settings, it can invoke
-scsi_adjust_queue_depth() in its slave_configure() routine.
+scsi_change_queue_depth() in its slave_configure() routine.
*** For scsi devices that the mid level tries to scan but do not
respond, a slave_alloc(), slave_destroy() pair is called.
scsi_add_device() ------+
|
slave_alloc()
- slave_configure() [--> scsi_adjust_queue_depth()]
+ slave_configure() [--> scsi_change_queue_depth()]
------------------------------------------------------------
In a similar fashion, an LLD may become aware that a SCSI device has been
| scsi_register()
|
slave_alloc()
- slave_configure() --> scsi_adjust_queue_depth()
+ slave_configure() --> scsi_change_queue_depth()
slave_alloc() ***
slave_destroy() ***
|
slave_destroy() ***
------------------------------------------------------------
-The mid level invokes scsi_adjust_queue_depth() with tagged queuing off and
-"cmd_per_lun" for that host as the queue length. These settings can be
-overridden by a slave_configure() supplied by the LLD.
+The mid level invokes scsi_change_queue_depth() with "cmd_per_lun" for that
+host as the queue length. These settings can be overridden by a
+slave_configure() supplied by the LLD.
*** For scsi devices that the mid level tries to scan but do not
respond, a slave_alloc(), slave_destroy() pair is called.
names all start with "scsi_".
Summary:
- scsi_activate_tcq - turn on tag command queueing
scsi_add_device - creates new scsi device (lu) instance
scsi_add_host - perform sysfs registration and set up transport class
- scsi_adjust_queue_depth - change the queue depth on a SCSI device
+ scsi_change_queue_depth - change the queue depth on a SCSI device
scsi_bios_ptable - return copy of block device's partition table
scsi_block_requests - prevent further commands being queued to given host
- scsi_deactivate_tcq - turn off tag command queueing
scsi_host_alloc - return a new scsi_host instance whose refcount==1
scsi_host_get - increments Scsi_Host instance's refcount
scsi_host_put - decrements Scsi_Host instance's refcount (free if 0)
Details:
-/**
- * scsi_activate_tcq - turn on tag command queueing ("ordered" task attribute)
- * @sdev: device to turn on TCQ for
- * @depth: queue depth
- *
- * Returns nothing
- *
- * Might block: no
- *
- * Notes: Eventually, it is hoped depth would be the maximum depth
- * the device could cope with and the real queue depth
- * would be adjustable from 0 to depth.
- *
- * Defined (inline) in: include/scsi/scsi_tcq.h
- **/
-void scsi_activate_tcq(struct scsi_device *sdev, int depth)
-
-
/**
* scsi_add_device - creates new scsi device (lu) instance
* @shost: pointer to scsi host instance
/**
- * scsi_adjust_queue_depth - allow LLD to change queue depth on a SCSI device
+ * scsi_change_queue_depth - allow LLD to change queue depth on a SCSI device
* @sdev: pointer to SCSI device to change queue depth on
- * @tagged: 0 - no tagged queuing
- * MSG_SIMPLE_TAG - simple tagged queuing
- * MSG_ORDERED_TAG - ordered tagged queuing
* @tags Number of tags allowed if tagged queuing enabled,
* or number of commands the LLD can queue up
* in non-tagged mode (as per cmd_per_lun).
*
* Notes: Can be invoked any time on a SCSI device controlled by this
* LLD. [Specifically during and after slave_configure() and prior to
- * slave_destroy().] Can safely be invoked from interrupt code. Actual
- * queue depth change may be delayed until the next command is being
- * processed. See also scsi_activate_tcq() and scsi_deactivate_tcq().
+ * slave_destroy().] Can safely be invoked from interrupt code.
*
* Defined in: drivers/scsi/scsi.c [see source code for more notes]
*
**/
-void scsi_adjust_queue_depth(struct scsi_device * sdev, int tagged,
- int tags)
+int scsi_change_queue_depth(struct scsi_device *sdev, int tags)
/**
void scsi_block_requests(struct Scsi_Host * shost)
-/**
- * scsi_deactivate_tcq - turn off tag command queueing
- * @sdev: device to turn off TCQ for
- * @depth: queue depth (stored in sdev)
- *
- * Returns nothing
- *
- * Might block: no
- *
- * Defined (inline) in: include/scsi/scsi_tcq.h
- **/
-void scsi_deactivate_tcq(struct scsi_device *sdev, int depth)
-
-
/**
* scsi_host_alloc - create a scsi host adapter instance and perform basic
* initialization.
for disk firmware uploads.
cmd_per_lun - maximum number of commands that can be queued on devices
controlled by the host. Overridden by LLD calls to
- scsi_adjust_queue_depth().
+ scsi_change_queue_depth().
unchecked_isa_dma - 1=>only use bottom 16 MB of ram (ISA DMA addressing
restriction), 0=>can use full 32 bit (or better) DMA
address space
Instances of this structure convey SCSI commands to the LLD and responses
back to the mid level. The SCSI mid level will ensure that no more SCSI
commands become queued against the LLD than are indicated by
-scsi_adjust_queue_depth() (or struct Scsi_Host::cmd_per_lun). There will
+scsi_change_queue_depth() (or struct Scsi_Host::cmd_per_lun). There will
be at least one instance of struct scsi_cmnd available for each SCSI device.
Members of interest:
cmnd - array containing SCSI command
DEBUGGING HINTS
-To enable debugging messages, edit st.c and #define DEBUG 1. As seen
-above, debugging can be switched off with an ioctl if debugging is
-compiled into the driver. The debugging output is not voluminous.
+Debugging code is now compiled in by default but debugging is turned off
+with the kernel module parameter debug_flag defaulting to 0. Debugging
+can still be switched on and off with an ioctl. To enable debug at
+module load time add debug_flag=1 to the module load options, the
+debugging output is not voluminous.
If the tape seems to hang, I would be very interested to hear where
the driver is waiting. With the command 'ps -l' you can see the state
--- /dev/null
+Driver for Western Digital WD7193, WD7197 and WD7296 SCSI cards
+---------------------------------------------------------------
+
+The card requires firmware that can be cut out of the Windows NT driver that
+can be downloaded from WD at:
+http://support.wdc.com/product/download.asp?groupid=801&sid=27&lang=en
+
+There is no license anywhere in the file or on the page - so the firmware
+probably cannot be added to linux-firmware.
+
+This script downloads and extracts the firmware, creating wd719x-risc.bin and
+d719x-wcs.bin files. Put them in /lib/firmware/.
+
+#!/bin/sh
+wget http://support.wdc.com/download/archive/pciscsi.exe
+lha xi pciscsi.exe pci-scsi.exe
+lha xi pci-scsi.exe nt/wd7296a.sys
+rm pci-scsi.exe
+dd if=wd7296a.sys of=wd719x-risc.bin bs=1 skip=5760 count=14336
+dd if=wd7296a.sys of=wd719x-wcs.bin bs=1 skip=20096 count=514
+rm wd7296a.sys
--- /dev/null
+Contents:
+
+1) TCM Userspace Design
+ a) Background
+ b) Benefits
+ c) Design constraints
+ d) Implementation overview
+ i. Mailbox
+ ii. Command ring
+ iii. Data Area
+ e) Device discovery
+ f) Device events
+ g) Other contingencies
+2) Writing a user pass-through handler
+ a) Discovering and configuring TCMU uio devices
+ b) Waiting for events on the device(s)
+ c) Managing the command ring
+3) Command filtering and pass_level
+4) A final note
+
+
+TCM Userspace Design
+--------------------
+
+TCM is another name for LIO, an in-kernel iSCSI target (server).
+Existing TCM targets run in the kernel. TCMU (TCM in Userspace)
+allows userspace programs to be written which act as iSCSI targets.
+This document describes the design.
+
+The existing kernel provides modules for different SCSI transport
+protocols. TCM also modularizes the data storage. There are existing
+modules for file, block device, RAM or using another SCSI device as
+storage. These are called "backstores" or "storage engines". These
+built-in modules are implemented entirely as kernel code.
+
+Background:
+
+In addition to modularizing the transport protocol used for carrying
+SCSI commands ("fabrics"), the Linux kernel target, LIO, also modularizes
+the actual data storage as well. These are referred to as "backstores"
+or "storage engines". The target comes with backstores that allow a
+file, a block device, RAM, or another SCSI device to be used for the
+local storage needed for the exported SCSI LUN. Like the rest of LIO,
+these are implemented entirely as kernel code.
+
+These backstores cover the most common use cases, but not all. One new
+use case that other non-kernel target solutions, such as tgt, are able
+to support is using Gluster's GLFS or Ceph's RBD as a backstore. The
+target then serves as a translator, allowing initiators to store data
+in these non-traditional networked storage systems, while still only
+using standard protocols themselves.
+
+If the target is a userspace process, supporting these is easy. tgt,
+for example, needs only a small adapter module for each, because the
+modules just use the available userspace libraries for RBD and GLFS.
+
+Adding support for these backstores in LIO is considerably more
+difficult, because LIO is entirely kernel code. Instead of undertaking
+the significant work to port the GLFS or RBD APIs and protocols to the
+kernel, another approach is to create a userspace pass-through
+backstore for LIO, "TCMU".
+
+
+Benefits:
+
+In addition to allowing relatively easy support for RBD and GLFS, TCMU
+will also allow easier development of new backstores. TCMU combines
+with the LIO loopback fabric to become something similar to FUSE
+(Filesystem in Userspace), but at the SCSI layer instead of the
+filesystem layer. A SUSE, if you will.
+
+The disadvantage is there are more distinct components to configure, and
+potentially to malfunction. This is unavoidable, but hopefully not
+fatal if we're careful to keep things as simple as possible.
+
+Design constraints:
+
+- Good performance: high throughput, low latency
+- Cleanly handle if userspace:
+ 1) never attaches
+ 2) hangs
+ 3) dies
+ 4) misbehaves
+- Allow future flexibility in user & kernel implementations
+- Be reasonably memory-efficient
+- Simple to configure & run
+- Simple to write a userspace backend
+
+
+Implementation overview:
+
+The core of the TCMU interface is a memory region that is shared
+between kernel and userspace. Within this region is: a control area
+(mailbox); a lockless producer/consumer circular buffer for commands
+to be passed up, and status returned; and an in/out data buffer area.
+
+TCMU uses the pre-existing UIO subsystem. UIO allows device driver
+development in userspace, and this is conceptually very close to the
+TCMU use case, except instead of a physical device, TCMU implements a
+memory-mapped layout designed for SCSI commands. Using UIO also
+benefits TCMU by handling device introspection (e.g. a way for
+userspace to determine how large the shared region is) and signaling
+mechanisms in both directions.
+
+There are no embedded pointers in the memory region. Everything is
+expressed as an offset from the region's starting address. This allows
+the ring to still work if the user process dies and is restarted with
+the region mapped at a different virtual address.
+
+See target_core_user.h for the struct definitions.
+
+The Mailbox:
+
+The mailbox is always at the start of the shared memory region, and
+contains a version, details about the starting offset and size of the
+command ring, and head and tail pointers to be used by the kernel and
+userspace (respectively) to put commands on the ring, and indicate
+when the commands are completed.
+
+version - 1 (userspace should abort if otherwise)
+flags - none yet defined.
+cmdr_off - The offset of the start of the command ring from the start
+of the memory region, to account for the mailbox size.
+cmdr_size - The size of the command ring. This does *not* need to be a
+power of two.
+cmd_head - Modified by the kernel to indicate when a command has been
+placed on the ring.
+cmd_tail - Modified by userspace to indicate when it has completed
+processing of a command.
+
+The Command Ring:
+
+Commands are placed on the ring by the kernel incrementing
+mailbox.cmd_head by the size of the command, modulo cmdr_size, and
+then signaling userspace via uio_event_notify(). Once the command is
+completed, userspace updates mailbox.cmd_tail in the same way and
+signals the kernel via a 4-byte write(). When cmd_head equals
+cmd_tail, the ring is empty -- no commands are currently waiting to be
+processed by userspace.
+
+TCMU commands start with a common header containing "len_op", a 32-bit
+value that stores the length, as well as the opcode in the lowest
+unused bits. Currently only two opcodes are defined, TCMU_OP_PAD and
+TCMU_OP_CMD. When userspace encounters a command with PAD opcode, it
+should skip ahead by the bytes in "length". (The kernel inserts PAD
+entries to ensure each CMD entry fits contigously into the circular
+buffer.)
+
+When userspace handles a CMD, it finds the SCSI CDB (Command Data
+Block) via tcmu_cmd_entry.req.cdb_off. This is an offset from the
+start of the overall shared memory region, not the entry. The data
+in/out buffers are accessible via tht req.iov[] array. Note that
+each iov.iov_base is also an offset from the start of the region.
+
+TCMU currently does not support BIDI operations.
+
+When completing a command, userspace sets rsp.scsi_status, and
+rsp.sense_buffer if necessary. Userspace then increments
+mailbox.cmd_tail by entry.hdr.length (mod cmdr_size) and signals the
+kernel via the UIO method, a 4-byte write to the file descriptor.
+
+The Data Area:
+
+This is shared-memory space after the command ring. The organization
+of this area is not defined in the TCMU interface, and userspace
+should access only the parts referenced by pending iovs.
+
+
+Device Discovery:
+
+Other devices may be using UIO besides TCMU. Unrelated user processes
+may also be handling different sets of TCMU devices. TCMU userspace
+processes must find their devices by scanning sysfs
+class/uio/uio*/name. For TCMU devices, these names will be of the
+format:
+
+tcm-user/<hba_num>/<device_name>/<subtype>/<path>
+
+where "tcm-user" is common for all TCMU-backed UIO devices. <hba_num>
+and <device_name> allow userspace to find the device's path in the
+kernel target's configfs tree. Assuming the usual mount point, it is
+found at:
+
+/sys/kernel/config/target/core/user_<hba_num>/<device_name>
+
+This location contains attributes such as "hw_block_size", that
+userspace needs to know for correct operation.
+
+<subtype> will be a userspace-process-unique string to identify the
+TCMU device as expecting to be backed by a certain handler, and <path>
+will be an additional handler-specific string for the user process to
+configure the device, if needed. The name cannot contain ':', due to
+LIO limitations.
+
+For all devices so discovered, the user handler opens /dev/uioX and
+calls mmap():
+
+mmap(NULL, size, PROT_READ|PROT_WRITE, MAP_SHARED, fd, 0)
+
+where size must be equal to the value read from
+/sys/class/uio/uioX/maps/map0/size.
+
+
+Device Events:
+
+If a new device is added or removed, a notification will be broadcast
+over netlink, using a generic netlink family name of "TCM-USER" and a
+multicast group named "config". This will include the UIO name as
+described in the previous section, as well as the UIO minor
+number. This should allow userspace to identify both the UIO device and
+the LIO device, so that after determining the device is supported
+(based on subtype) it can take the appropriate action.
+
+
+Other contingencies:
+
+Userspace handler process never attaches:
+
+- TCMU will post commands, and then abort them after a timeout period
+ (30 seconds.)
+
+Userspace handler process is killed:
+
+- It is still possible to restart and re-connect to TCMU
+ devices. Command ring is preserved. However, after the timeout period,
+ the kernel will abort pending tasks.
+
+Userspace handler process hangs:
+
+- The kernel will abort pending tasks after a timeout period.
+
+Userspace handler process is malicious:
+
+- The process can trivially break the handling of devices it controls,
+ but should not be able to access kernel memory outside its shared
+ memory areas.
+
+
+Writing a user pass-through handler (with example code)
+-------------------------------------------------------
+
+A user process handing a TCMU device must support the following:
+
+a) Discovering and configuring TCMU uio devices
+b) Waiting for events on the device(s)
+c) Managing the command ring: Parsing operations and commands,
+ performing work as needed, setting response fields (scsi_status and
+ possibly sense_buffer), updating cmd_tail, and notifying the kernel
+ that work has been finished
+
+First, consider instead writing a plugin for tcmu-runner. tcmu-runner
+implements all of this, and provides a higher-level API for plugin
+authors.
+
+TCMU is designed so that multiple unrelated processes can manage TCMU
+devices separately. All handlers should make sure to only open their
+devices, based opon a known subtype string.
+
+a) Discovering and configuring TCMU UIO devices:
+
+(error checking omitted for brevity)
+
+int fd, dev_fd;
+char buf[256];
+unsigned long long map_len;
+void *map;
+
+fd = open("/sys/class/uio/uio0/name", O_RDONLY);
+ret = read(fd, buf, sizeof(buf));
+close(fd);
+buf[ret-1] = '\0'; /* null-terminate and chop off the \n */
+
+/* we only want uio devices whose name is a format we expect */
+if (strncmp(buf, "tcm-user", 8))
+ exit(-1);
+
+/* Further checking for subtype also needed here */
+
+fd = open(/sys/class/uio/%s/maps/map0/size, O_RDONLY);
+ret = read(fd, buf, sizeof(buf));
+close(fd);
+str_buf[ret-1] = '\0'; /* null-terminate and chop off the \n */
+
+map_len = strtoull(buf, NULL, 0);
+
+dev_fd = open("/dev/uio0", O_RDWR);
+map = mmap(NULL, map_len, PROT_READ|PROT_WRITE, MAP_SHARED, dev_fd, 0);
+
+
+b) Waiting for events on the device(s)
+
+while (1) {
+ char buf[4];
+
+ int ret = read(dev_fd, buf, 4); /* will block */
+
+ handle_device_events(dev_fd, map);
+}
+
+
+c) Managing the command ring
+
+#include <linux/target_core_user.h>
+
+int handle_device_events(int fd, void *map)
+{
+ struct tcmu_mailbox *mb = map;
+ struct tcmu_cmd_entry *ent = (void *) mb + mb->cmdr_off + mb->cmd_tail;
+ int did_some_work = 0;
+
+ /* Process events from cmd ring until we catch up with cmd_head */
+ while (ent != (void *)mb + mb->cmdr_off + mb->cmd_head) {
+
+ if (tcmu_hdr_get_op(&ent->hdr) == TCMU_OP_CMD) {
+ uint8_t *cdb = (void *)mb + ent->req.cdb_off;
+ bool success = true;
+
+ /* Handle command here. */
+ printf("SCSI opcode: 0x%x\n", cdb[0]);
+
+ /* Set response fields */
+ if (success)
+ ent->rsp.scsi_status = SCSI_NO_SENSE;
+ else {
+ /* Also fill in rsp->sense_buffer here */
+ ent->rsp.scsi_status = SCSI_CHECK_CONDITION;
+ }
+ }
+ else {
+ /* Do nothing for PAD entries */
+ }
+
+ /* update cmd_tail */
+ mb->cmd_tail = (mb->cmd_tail + tcmu_hdr_get_len(&ent->hdr)) % mb->cmdr_size;
+ ent = (void *) mb + mb->cmdr_off + mb->cmd_tail;
+ did_some_work = 1;
+ }
+
+ /* Notify the kernel that work has been finished */
+ if (did_some_work) {
+ uint32_t buf = 0;
+
+ write(fd, &buf, 4);
+ }
+
+ return 0;
+}
+
+
+Command filtering and pass_level
+--------------------------------
+
+TCMU supports a "pass_level" option with valid values of 0 or 1. When
+the value is 0 (the default), nearly all SCSI commands received for
+the device are passed through to the handler. This allows maximum
+flexibility but increases the amount of code required by the handler,
+to support all mandatory SCSI commands. If pass_level is set to 1,
+then only IO-related commands are presented, and the rest are handled
+by LIO's in-kernel command emulation. The commands presented at level
+1 include all versions of:
+
+READ
+WRITE
+WRITE_VERIFY
+XDWRITEREAD
+WRITE_SAME
+COMPARE_AND_WRITE
+SYNCHRONIZE_CACHE
+UNMAP
+
+
+A final note
+------------
+
+Please be careful to return codes as defined by the SCSI
+specifications. These are different than some values defined in the
+scsi/scsi.h include file. For example, CHECK CONDITION's status code
+is 2, not 1.
HOSTCFLAGS := -I$(objtree)/usr/include -std=gnu99
HOSTCFLAGS_vdso_standalone_test_x86.o := -fno-asynchronous-unwind-tables -fno-stack-protector
HOSTLOADLIBES_vdso_standalone_test_x86 := -nostdlib
+ifeq ($(CONFIG_X86_32),y)
+HOSTLOADLIBES_vdso_standalone_test_x86 += -lgcc_s
+endif
x86_syscall3(__NR_exit, code, 0, 0);
}
-void to_base10(char *lastdig, uint64_t n)
+void to_base10(char *lastdig, time_t n)
{
while (n) {
*lastdig = (n % 10) + '0';
key, not quality.
multiplanar: select whether each device instance supports multi-planar formats,
- and thus the V4L2 multi-planar API. By default the first device instance
- is single-planar, the second multi-planar, and it keeps alternating.
+ and thus the V4L2 multi-planar API. By default device instances are
+ single-planar.
This module option can override that for each instance. Values are:
- 0: use alternating single and multi-planar devices.
1: this is a single-planar instance.
2: this is a multi-planar instance.
0 otherwise.
The driver has to be configured to support the multiplanar formats. By default
-the first driver instance is single-planar, the second is multi-planar, and it
-keeps alternating. This can be changed by setting the multiplanar module option,
-see section 1 for more details on that option.
+the driver instances are single-planar. This can be changed by setting the
+multiplanar module option, see section 1 for more details on that option.
If the driver instance is using the multiplanar formats/API, then the first
single planar format (YUYV) and the multiplanar NV16M and NV61M formats the
to see the blended framebuffer overlay that's being written to by the second
instance. This setup would require the following commands:
- $ sudo modprobe vivid n_devs=2 node_types=0x10101,0x1 multiplanar=1,1
+ $ sudo modprobe vivid n_devs=2 node_types=0x10101,0x1
$ v4l2-ctl -d1 --find-fb
/dev/fb1 is the framebuffer associated with base address 0x12800000
$ sudo v4l2-ctl -d2 --set-fbuf fb=1
/mnt/huge. Any files created on /mnt/huge uses huge pages. The uid and gid
options sets the owner and group of the root of the file system. By default
the uid and gid of the current process are taken. The mode option sets the
-mode of root of file system to value & 0777. This value is given in octal.
+mode of root of file system to value & 01777. This value is given in octal.
By default the value 0755 is picked. The size option sets the maximum value of
memory (huge pages) allowed for that filesystem (/mnt/huge). The size is
rounded down to HPAGE_SIZE. The option nr_inodes sets the maximum number of
W: http://www.linux4sam.org
S: Supported
F: arch/arm/mach-at91/
+F: include/soc/at91/
F: arch/arm/boot/dts/at91*.dts
F: arch/arm/boot/dts/at91*.dtsi
F: arch/arm/boot/dts/sama*.dts
F: drivers/*/*/*rockchip*
F: sound/soc/rockchip/
-ARM/SAMSUNG ARM ARCHITECTURES
-M: Ben Dooks <ben-linux@fluff.org>
-M: Kukjin Kim <kgene.kim@samsung.com>
+ARM/SAMSUNG EXYNOS ARM ARCHITECTURES
+M: Kukjin Kim <kgene@kernel.org>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
-W: http://www.fluff.org/ben/linux/
S: Maintained
F: arch/arm/boot/dts/s3c*
F: arch/arm/boot/dts/exynos*
F: arch/arm/plat-samsung/
F: arch/arm/mach-s3c24*/
F: arch/arm/mach-s3c64xx/
+F: arch/arm/mach-s5p*/
+F: arch/arm/mach-exynos*/
F: drivers/*/*s3c2410*
F: drivers/*/*/*s3c2410*
F: drivers/spi/spi-s3c*
F: sound/soc/samsung/*
-
-ARM/S5P EXYNOS ARM ARCHITECTURES
-M: Kukjin Kim <kgene.kim@samsung.com>
-L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-L: linux-samsung-soc@vger.kernel.org (moderated for non-subscribers)
-S: Maintained
-F: arch/arm/mach-s5p*/
-F: arch/arm/mach-exynos*/
N: exynos
ARM/SAMSUNG MOBILE MACHINE SUPPORT
F: arch/arm/configs/ape6evm_defconfig
F: arch/arm/configs/armadillo800eva_defconfig
F: arch/arm/configs/bockw_defconfig
-F: arch/arm/configs/koelsch_defconfig
F: arch/arm/configs/kzm9g_defconfig
F: arch/arm/configs/lager_defconfig
F: arch/arm/configs/mackerel_defconfig
F: arch/arm/configs/marzen_defconfig
F: arch/arm/configs/shmobile_defconfig
+F: arch/arm/include/debug/renesas-scif.S
F: arch/arm/mach-shmobile/
F: drivers/sh/
F: drivers/usb/dwc3/dwc3-st.c
F: drivers/usb/host/ehci-st.c
F: drivers/usb/host/ohci-st.c
+F: drivers/ata/ahci_st.c
ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
M: Lennert Buytenhek <kernel@wantstofly.org>
F: drivers/clk/ux500/
F: include/linux/platform_data/clk-ux500.h
+ARM/VERSATILE EXPRESS PLATFORM
+M: Liviu Dudau <liviu.dudau@arm.com>
+M: Sudeep Holla <sudeep.holla@arm.com>
+M: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Maintained
+F: arch/arm/boot/dts/vexpress*
+F: arch/arm/mach-vexpress/
+F: */*/vexpress*
+F: */*/*/vexpress*
+F: drivers/clk/versatile/clk-vexpress-osc.c
+F: drivers/clocksource/versatile.c
+
ARM/VFP SUPPORT
M: Russell King <linux@arm.linux.org.uk>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
ARM/ZYNQ ARCHITECTURE
M: Michal Simek <michal.simek@xilinx.com>
+R: Sören Brinkmann <soren.brinkmann@xilinx.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
W: http://wiki.xilinx.com
T: git git://git.xilinx.com/linux-xlnx.git
S: Supported
F: drivers/spi/spi-atmel.*
+ATMEL SSC DRIVER
+M: Bo Shen <voice.shen@atmel.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+S: Supported
+F: drivers/misc/atmel-ssc.c
+F: include/linux/atmel-ssc.h
+
ATMEL Timer Counter (TC) AND CLOCKSOURCE DRIVERS
M: Nicolas Ferre <nicolas.ferre@atmel.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
F: net/ax25/
AZ6007 DVB DRIVER
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
BROADCOM BCM2835 ARM ARCHITECTURE
M: Stephen Warren <swarren@wwwdotorg.org>
+M: Lee Jones <lee@kernel.org>
L: linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers)
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/rpi/linux-rpi.git
S: Maintained
N: bcm2835
BROADCOM BCM7XXX ARM ARCHITECTURE
M: Marc Carino <marc.ceeeee@gmail.com>
M: Brian Norris <computersforpeace@gmail.com>
+M: Gregory Fong <gregory.0xf0@gmail.com>
+M: Florian Fainelli <f.fainelli@gmail.com>
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
S: Maintained
F: arch/arm/mach-bcm/*brcmstb*
F: arch/arm/boot/dts/bcm7*.dts*
+F: drivers/bus/brcmstb_gisb.c
BROADCOM TG3 GIGABIT ETHERNET DRIVER
M: Prashant Sreedharan <prashant@broadcom.com>
S: Supported
F: drivers/scsi/bnx2i/
+BROADCOM CYGNUS/IPROC ARM ARCHITECTURE
+M: Ray Jui <rjui@broadcom.com>
+M: Scott Branden <sbranden@broadcom.com>
+L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
+L: bcm-kernel-feedback-list@broadcom.com
+T: git git://git.github.com/brcm/linux.git
+S: Maintained
+N: iproc
+N: cygnus
+N: bcm9113*
+N: bcm9583*
+N: bcm583*
+N: bcm113*
+
BROADCOM KONA GPIO DRIVER
M: Ray Jui <rjui@broadcom.com>
L: bcm-kernel-feedback-list@broadcom.com
F: fs/btrfs/
BTTV VIDEO4LINUX DRIVER
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
F: include/media/cx2341x*
CX88 VIDEO4LINUX DRIVER
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
S: Supported
F: drivers/net/ethernet/chelsio/cxgb3/
+CXGB3 ISCSI DRIVER (CXGB3I)
+M: Karen Xie <kxie@chelsio.com>
+L: linux-scsi@vger.kernel.org
+W: http://www.chelsio.com
+S: Supported
+F: drivers/scsi/cxgbi/cxgb3i
+
CXGB3 IWARP RNIC DRIVER (IW_CXGB3)
M: Steve Wise <swise@chelsio.com>
L: linux-rdma@vger.kernel.org
S: Supported
F: drivers/net/ethernet/chelsio/cxgb4/
+CXGB4 ISCSI DRIVER (CXGB4I)
+M: Karen Xie <kxie@chelsio.com>
+L: linux-scsi@vger.kernel.org
+W: http://www.chelsio.com
+S: Supported
+F: drivers/scsi/cxgbi/cxgb4i
+
CXGB4 IWARP RNIC DRIVER (IW_CXGB4)
M: Steve Wise <swise@chelsio.com>
L: linux-rdma@vger.kernel.org
F: drivers/net/ethernet/dec/tulip/dmfe.c
DC390/AM53C974 SCSI driver
-M: Kurt Garloff <garloff@suse.de>
-W: http://www.garloff.de/kurt/linux/dc390/
-M: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
+M: Hannes Reinecke <hare@suse.de>
+L: linux-scsi@vger.kernel.org
S: Maintained
-F: drivers/scsi/tmscsim.*
+F: drivers/scsi/am53c974.c
DC395x SCSI driver
M: Oliver Neukum <oliver@neukum.org>
EDAC-CORE
M: Doug Thompson <dougthompson@xmission.com>
M: Borislav Petkov <bp@alien8.de>
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-edac@vger.kernel.org
W: bluesmoke.sourceforge.net
S: Supported
F: drivers/edac/e7xxx_edac.c
EDAC-GHES
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-edac@vger.kernel.org
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i5000_edac.c
EDAC-I5400
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-edac@vger.kernel.org
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i5400_edac.c
EDAC-I7300
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-edac@vger.kernel.org
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/i7300_edac.c
EDAC-I7CORE
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-edac@vger.kernel.org
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/edac/r82600_edac.c
EDAC-SBRIDGE
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-edac@vger.kernel.org
W: bluesmoke.sourceforge.net
S: Maintained
F: drivers/net/ethernet/ibm/ehea/
EM28XX VIDEO4LINUX DRIVER
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
F: drivers/block/cpqarray.*
HEWLETT-PACKARD SMART ARRAY RAID DRIVER (hpsa)
-M: "Stephen M. Cameron" <scameron@beardog.cce.hp.com>
+M: Don Brace <don.brace@pmcs.com>
L: iss_storagedev@hp.com
+L: storagedev@pmcs.com
+L: linux-scsi@vger.kernel.org
S: Supported
F: Documentation/scsi/hpsa.txt
F: drivers/scsi/hpsa*.[ch]
F: include/uapi/linux/cciss*.h
HEWLETT-PACKARD SMART CISS RAID DRIVER (cciss)
-M: Mike Miller <mike.miller@hp.com>
+M: Don Brace <don.brace@pmcs.com>
L: iss_storagedev@hp.com
+L: storagedev@pmcs.com
+L: linux-scsi@vger.kernel.org
S: Supported
F: Documentation/blockdev/cciss.txt
F: drivers/block/cciss*
F: drivers/crypto/nx/
IBM Power 842 compression accelerator
-M: Nathan Fontenot <nfont@linux.vnet.ibm.com>
+M: Dan Streetman <ddstreet@us.ibm.com>
S: Supported
F: drivers/crypto/nx/nx-842.c
F: include/linux/nx842.h
S: Maintained
F: drivers/iio/
F: drivers/staging/iio/
+F: include/linux/iio/
IKANOS/ADI EAGLE ADSL USB DRIVER
M: Matthieu Castet <castet.matthieu@free.fr>
F: drivers/net/macvlan.c
F: include/linux/if_macvlan.h
+MAILBOX API
+M: Jassi Brar <jassisinghbrar@gmail.com>
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: drivers/mailbox/
+F: include/linux/mailbox_client.h
+F: include/linux/mailbox_controller.h
+
MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7
M: Michael Kerrisk <mtk.manpages@gmail.com>
W: http://www.kernel.org/doc/man-pages
F: drivers/media/radio/radio-maxiradio*
MEDIA INPUT INFRASTRUCTURE (V4L/DVB)
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
P: LinuxTV.org Project
L: linux-media@vger.kernel.org
W: http://linuxtv.org
S: Odd Fixes
F: drivers/media/parport/pms*
-MEGARAID SCSI DRIVERS
-M: Neela Syam Kolli <megaraidlinux@lsi.com>
+MEGARAID SCSI/SAS DRIVERS
+M: Kashyap Desai <kashyap.desai@avagotech.com>
+M: Sumit Saxena <sumit.saxena@avagotech.com>
+M: Uday Lingala <uday.lingala@avagotech.com>
+L: megaraidlinux.pdl@avagotech.com
L: linux-scsi@vger.kernel.org
-W: http://megaraid.lsilogic.com
+W: http://www.lsi.com
S: Maintained
F: Documentation/scsi/megaraid.txt
F: drivers/scsi/megaraid.*
F: drivers/scsi/g_NCR5380_mmio.c
F: drivers/scsi/mac_scsi.*
F: drivers/scsi/pas16.*
-F: drivers/scsi/sun3_NCR5380.c
F: drivers/scsi/sun3_scsi.*
F: drivers/scsi/sun3_scsi_vme.c
F: drivers/scsi/t128.*
F: Documentation/scsi/NinjaSCSI.txt
F: drivers/scsi/nsp32*
+NIOS2 ARCHITECTURE
+M: Ley Foon Tan <lftan@altera.com>
+L: nios2-dev@lists.rocketboards.org (moderated for non-subscribers)
+T: git git://git.rocketboards.org/linux-socfpga.git
+S: Maintained
+F: arch/nios2/
+
NTB DRIVER
M: Jon Mason <jdmason@kudzu.us>
M: Dave Jiang <dave.jiang@intel.com>
S: Maintained
F: arch/arm/*omap*/
F: drivers/i2c/busses/i2c-omap.c
+F: drivers/irqchip/irq-omap-intc.c
+F: drivers/mfd/*omap*.c
+F: drivers/mfd/menelaus.c
+F: drivers/mfd/palmas.c
+F: drivers/mfd/tps65217.c
+F: drivers/mfd/tps65218.c
+F: drivers/mfd/tps65910.c
+F: drivers/mfd/twl-core.[ch]
+F: drivers/mfd/twl4030*.c
+F: drivers/mfd/twl6030*.c
+F: drivers/mfd/twl6040*.c
+F: drivers/regulator/palmas-regulator*.c
+F: drivers/regulator/pbias-regulator.c
+F: drivers/regulator/tps65217-regulator.c
+F: drivers/regulator/tps65218-regulator.c
+F: drivers/regulator/tps65910-regulator.c
+F: drivers/regulator/twl-regulator.c
F: include/linux/i2c-omap.h
OMAP DEVICE TREE SUPPORT
S: Maintained
F: arch/arm/boot/dts/*omap*
F: arch/arm/boot/dts/*am3*
+F: arch/arm/boot/dts/*am4*
+F: arch/arm/boot/dts/*am5*
+F: arch/arm/boot/dts/*dra7*
OMAP CLOCK FRAMEWORK SUPPORT
M: Paul Walmsley <paul@pwsan.com>
S: Maintained
F: sound/soc/omap/
+OMAP GENERAL PURPOSE MEMORY CONTROLLER SUPPORT
+M: Roger Quadros <rogerq@ti.com>
+M: Tony Lindgren <tony@atomide.com>
+L: linux-omap@vger.kernel.org
+S: Maintained
+F: drivers/memory/omap-gpmc.c
+F: arch/arm/mach-omap2/*gpmc*
+
OMAP FRAMEBUFFER SUPPORT
M: Tomi Valkeinen <tomi.valkeinen@ti.com>
L: linux-fbdev@vger.kernel.org
F: drivers/net/wireless/orinoco/
OSD LIBRARY and FILESYSTEM
-M: Boaz Harrosh <bharrosh@panasas.com>
+M: Boaz Harrosh <ooo@electrozaur.com>
M: Benny Halevy <bhalevy@primarydata.com>
L: osd-dev@open-osd.org
W: http://open-osd.org
F: include/scsi/osd_*
F: fs/exofs/
+OVERLAY FILESYSTEM
+M: Miklos Szeredi <miklos@szeredi.hu>
+L: linux-unionfs@vger.kernel.org
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs.git
+S: Supported
+F: fs/overlayfs/
+F: Documentation/filesystems/overlayfs.txt
+
P54 WIRELESS DRIVER
M: Christian Lamparter <chunkeey@googlemail.com>
L: linux-wireless@vger.kernel.org
PIN CONTROL SUBSYSTEM
M: Linus Walleij <linus.walleij@linaro.org>
+L: linux-gpio@vger.kernel.org
S: Maintained
F: drivers/pinctrl/
F: include/linux/pinctrl/
F: drivers/media/i2c/saa6588*
SAA7134 VIDEO4LINUX DRIVER
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
F: drivers/media/radio/si4713/radio-usb-si4713.c
SIANO DVB DRIVER
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
TI DAVINCI MACHINE SUPPORT
M: Sekhar Nori <nsekhar@ti.com>
M: Kevin Hilman <khilman@deeprootsystems.com>
-L: davinci-linux-open-source@linux.davincidsp.com (moderated for non-subscribers)
T: git git://gitorious.org/linux-davinci/linux-davinci.git
Q: http://patchwork.kernel.org/project/linux-davinci/list/
S: Supported
TI DAVINCI SERIES MEDIA DRIVER
M: Lad, Prabhakar <prabhakar.csengg@gmail.com>
L: linux-media@vger.kernel.org
-L: davinci-linux-open-source@linux.davincidsp.com (moderated for non-subscribers)
W: http://linuxtv.org/
Q: http://patchwork.linuxtv.org/project/linux-media/list/
T: git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git
F: drivers/leds/leds-net48xx.c
SOFTLOGIC 6x10 MPEG CODEC
-M: Ismael Luceno <ismael.luceno@corp.bluecherry.net>
+M: Bluecherry Maintainers <maintainers@bluecherrydvr.com>
+M: Andrey Utkin <andrey.utkin@corp.bluecherry.net>
+M: Andrey Utkin <andrey.krieger.utkin@gmail.com>
L: linux-media@vger.kernel.org
S: Supported
F: drivers/media/pci/solo6x10/
F: drivers/media/i2c/tda9840*
TEA5761 TUNER DRIVER
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
F: drivers/media/tuners/tea5761.*
TEA5767 TUNER DRIVER
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
F: mm/shmem.c
TM6000 VIDEO4LINUX DRIVER
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
UNIVERSAL FLASH STORAGE HOST CONTROLLER DRIVER
M: Vinayak Holikatti <vinholikatti@gmail.com>
-M: Santosh Y <santoshsy@gmail.com>
L: linux-scsi@vger.kernel.org
S: Supported
F: Documentation/scsi/ufs.txt
F: Documentation/hid/hiddev.txt
F: drivers/hid/usbhid/
-USB/IP DRIVERS
-L: linux-usb@vger.kernel.org
-S: Orphan
-F: drivers/staging/usbip/
-
USB ISP116X DRIVER
M: Olav Kongas <ok@artecdesign.ee>
L: linux-usb@vger.kernel.org
F: arch/x86/kernel/cpu/mcheck/*
XC2028/3028 TUNER DRIVER
-M: Mauro Carvalho Chehab <m.chehab@samsung.com>
+M: Mauro Carvalho Chehab <mchehab@osg.samsung.com>
L: linux-media@vger.kernel.org
W: http://linuxtv.org
T: git git://linuxtv.org/media_tree.git
VERSION = 3
PATCHLEVEL = 18
SUBLEVEL = 0
-EXTRAVERSION = -rc1
-NAME = Shuffling Zombie Juror
+EXTRAVERSION =
+NAME = Diseased Newt
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
HOSTCC = gcc
HOSTCXX = g++
-HOSTCFLAGS = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer
+HOSTCFLAGS = -Wall -Wmissing-prototypes -Wstrict-prototypes -O2 -fomit-frame-pointer -std=gnu89
HOSTCXXFLAGS = -O2
ifeq ($(shell $(HOSTCC) -v 2>&1 | grep -c "clang version"), 1)
KBUILD_CFLAGS := -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
-fno-strict-aliasing -fno-common \
-Werror-implicit-function-declaration \
- -Wno-format-security
+ -Wno-format-security \
+ -std=gnu89
KBUILD_AFLAGS_KERNEL :=
KBUILD_CFLAGS_KERNEL :=
config ARC
def_bool y
select BUILDTIME_EXTABLE_SORT
+ select COMMON_CLK
select CLONE_BACKWARDS
# ARC Busybox based initramfs absolutely relies on DEVTMPFS for /dev
select DEVTMPFS if !INITRAMFS_SOURCE=""
config HAVE_LATENCYTOP_SUPPORT
def_bool y
-config NO_DMA
- def_bool n
-
source "init/Kconfig"
source "kernel/Kconfig.freezer"
kernel mode. This saves memory access for each such access
-config ARC_MISALIGN_ACCESS
+config ARC_EMUL_UNALIGNED
bool "Emulate unaligned memory access (userspace only)"
select SYSCTL_ARCH_UNALIGN_NO_WARN
select SYSCTL_ARCH_UNALIGN_ALLOW
LINUXINCLUDE += -include ${src}/arch/arc/include/asm/current.h
endif
-upto_gcc42 := $(call cc-ifversion, -le, 0402, y)
upto_gcc44 := $(call cc-ifversion, -le, 0404, y)
atleast_gcc44 := $(call cc-ifversion, -ge, 0404, y)
atleast_gcc48 := $(call cc-ifversion, -ge, 0408, y)
# --build-id w/o "-marclinux". Default arc-elf32-ld is OK
ldflags-$(upto_gcc44) += -marclinux
-ARC_LIBGCC := -mA7
-cflags-$(CONFIG_ARC_HAS_HW_MPY) += -multcost=16
-
ifndef CONFIG_ARC_HAS_HW_MPY
cflags-y += -mno-mpy
-
-# newlib for ARC700 assumes MPY to be always present, which is generally true
-# However, if someone really doesn't want MPY, we need to use the 600 ver
-# which coupled with -mno-mpy will use mpy emulation
-# With gcc 4.4.7, -mno-mpy is enough to make any other related adjustments,
-# e.g. increased cost of MPY. With gcc 4.2.1 this had to be explicitly hinted
-
- ifeq ($(upto_gcc42),y)
- ARC_LIBGCC := -marc600
- cflags-y += -multcost=30
- endif
endif
-LIBGCC := $(shell $(CC) $(ARC_LIBGCC) $(cflags-y) --print-libgcc-file-name)
+LIBGCC := $(shell $(CC) $(cflags-y) --print-libgcc-file-name)
# Modules with short calls might break for calls into builtin-kernel
KBUILD_CFLAGS_MODULE += -mlong-calls
serial0 = &arcuart0;
};
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>; /* 256M */
- };
-
fpga {
compatible = "simple-bus";
#address-cells = <1>;
/* this is for console on PGU */
/* bootargs = "console=tty0 consoleblank=0"; */
/* this is for console on serial */
- bootargs = "earlycon=uart8250,mmio32,0xc0000000,115200n8 console=ttyS0,115200n8 consoleblank=0 debug";
+ bootargs = "earlycon=uart8250,mmio32,0xc0000000,115200n8 console=tty0 console=ttyS0,115200n8 consoleblank=0 debug";
};
aliases {
serial0 = &uart0;
};
- memory {
- device_type = "memory";
- reg = <0x80000000 0x10000000>; /* 256M */
- };
-
fpga {
compatible = "simple-bus";
#address-cells = <1>;
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARC_PLAT_FPGA_LEGACY=y
-CONFIG_ARC_BOARD_ML509=y
# CONFIG_ARC_HAS_RTSC is not set
CONFIG_ARC_BUILTIN_DTB_NAME="angel4"
CONFIG_PREEMPT=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARC_PLAT_FPGA_LEGACY=y
-CONFIG_ARC_BOARD_ML509=y
# CONFIG_ARC_HAS_RTSC is not set
CONFIG_ARC_BUILTIN_DTB_NAME="angel4"
CONFIG_PREEMPT=y
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARC_PLAT_FPGA_LEGACY=y
-CONFIG_ARC_BOARD_ML509=y
# CONFIG_ARC_IDE is not set
# CONFIG_ARCTANGENT_EMAC is not set
# CONFIG_ARC_HAS_RTSC is not set
#ifndef _ASM_ARC_ARCREGS_H
#define _ASM_ARC_ARCREGS_H
-#ifdef __KERNEL__
-
/* Build Configuration Registers */
#define ARC_REG_DCCMBASE_BCR 0x61 /* DCCM Base Addr */
#define ARC_REG_CRC_BCR 0x62
-#define ARC_REG_DVFB_BCR 0x64
-#define ARC_REG_EXTARITH_BCR 0x65
#define ARC_REG_VECBASE_BCR 0x68
#define ARC_REG_PERIBASE_BCR 0x69
-#define ARC_REG_FP_BCR 0x6B /* Single-Precision FPU */
-#define ARC_REG_DPFP_BCR 0x6C /* Dbl Precision FPU */
+#define ARC_REG_FP_BCR 0x6B /* ARCompact: Single-Precision FPU */
+#define ARC_REG_DPFP_BCR 0x6C /* ARCompact: Dbl Precision FPU */
#define ARC_REG_DCCM_BCR 0x74 /* DCCM Present + SZ */
#define ARC_REG_TIMERS_BCR 0x75
+#define ARC_REG_AP_BCR 0x76
#define ARC_REG_ICCM_BCR 0x78
#define ARC_REG_XY_MEM_BCR 0x79
#define ARC_REG_MAC_BCR 0x7a
#define ARC_REG_MIXMAX_BCR 0x7e
#define ARC_REG_BARREL_BCR 0x7f
#define ARC_REG_D_UNCACH_BCR 0x6A
+#define ARC_REG_BPU_BCR 0xc0
+#define ARC_REG_ISA_CFG_BCR 0xc1
+#define ARC_REG_SMART_BCR 0xFF
/* status32 Bits Positions */
#define STATUS_AE_BIT 5 /* Exception active */
#define PAGES_TO_KB(n_pages) ((n_pages) << (PAGE_SHIFT - 10))
#define PAGES_TO_MB(n_pages) (PAGES_TO_KB(n_pages) >> 10)
-#ifdef CONFIG_ARC_FPU_SAVE_RESTORE
-/* These DPFP regs need to be saved/restored across ctx-sw */
-struct arc_fpu {
- struct {
- unsigned int l, h;
- } aux_dpfp[2];
-};
-#endif
/*
***************************************************************
#endif
};
-#define EXTN_SWAP_VALID 0x1
-#define EXTN_NORM_VALID 0x2
-#define EXTN_MINMAX_VALID 0x2
-#define EXTN_BARREL_VALID 0x2
-
-struct bcr_extn {
+struct bcr_isa {
#ifdef CONFIG_CPU_BIG_ENDIAN
- unsigned int pad:20, crc:1, ext_arith:2, mul:2, barrel:2, minmax:2,
- norm:2, swap:1;
+ unsigned int pad1:23, atomic1:1, ver:8;
#else
- unsigned int swap:1, norm:2, minmax:2, barrel:2, mul:2, ext_arith:2,
- crc:1, pad:20;
+ unsigned int ver:8, atomic1:1, pad1:23;
#endif
};
-/* DSP Options Ref Manual */
-struct bcr_extn_mac_mul {
+struct bcr_mpy {
#ifdef CONFIG_CPU_BIG_ENDIAN
- unsigned int pad:16, type:8, ver:8;
+ unsigned int pad:8, x1616:8, dsp:4, cycles:2, type:2, ver:8;
#else
- unsigned int ver:8, type:8, pad:16;
+ unsigned int ver:8, type:2, cycles:2, dsp:4, x1616:8, pad:8;
#endif
};
unsigned int pad:8, sz:8, pad2:8, start:8;
#endif
};
+
struct bcr_iccm {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int base:16, pad:5, sz:3, ver:8;
#endif
};
-/* Both SP and DP FPU BCRs have same format */
-struct bcr_fp {
+/* ARCompact: Both SP and DP FPU BCRs have same format */
+struct bcr_fp_arcompact {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int fast:1, ver:8;
#else
#endif
};
+struct bcr_timer {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+ unsigned int pad2:15, rtsc:1, pad1:6, t1:1, t0:1, ver:8;
+#else
+ unsigned int ver:8, t0:1, t1:1, pad1:6, rtsc:1, pad2:15;
+#endif
+};
+
+struct bcr_bpu_arcompact {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+ unsigned int pad2:19, fam:1, pad:2, ent:2, ver:8;
+#else
+ unsigned int ver:8, ent:2, pad:2, fam:1, pad2:19;
+#endif
+};
+
+struct bcr_generic {
+#ifdef CONFIG_CPU_BIG_ENDIAN
+ unsigned int pad:24, ver:8;
+#else
+ unsigned int ver:8, pad:24;
+#endif
+};
+
/*
*******************************************************************
* Generic structures to hold build configuration used at runtime
unsigned int sz_k:8, line_len:8, assoc:4, ver:4, alias:1, vipt:1, pad:6;
};
+struct cpuinfo_arc_bpu {
+ unsigned int ver, full, num_cache, num_pred;
+};
+
struct cpuinfo_arc_ccm {
unsigned int base_addr, sz;
};
struct cpuinfo_arc {
struct cpuinfo_arc_cache icache, dcache;
struct cpuinfo_arc_mmu mmu;
+ struct cpuinfo_arc_bpu bpu;
struct bcr_identity core;
- unsigned int timers;
+ struct bcr_isa isa;
+ struct bcr_timer timers;
unsigned int vec_base;
unsigned int uncached_base;
struct cpuinfo_arc_ccm iccm, dccm;
- struct bcr_extn extn;
+ struct {
+ unsigned int swap:1, norm:1, minmax:1, barrel:1, crc:1, pad1:3,
+ fpu_sp:1, fpu_dp:1, pad2:6,
+ debug:1, ap:1, smart:1, rtt:1, pad3:4,
+ pad4:8;
+ } extn;
+ struct bcr_mpy extn_mpy;
struct bcr_extn_xymem extn_xymem;
- struct bcr_extn_mac_mul extn_mac_mul;
- struct bcr_fp fp, dpfp;
};
extern struct cpuinfo_arc cpuinfo_arc700[];
#endif /* __ASEMBLY__ */
-#endif /* __KERNEL__ */
-
#endif /* _ASM_ARC_ARCREGS_H */
#ifndef _ASM_ARC_ATOMIC_H
#define _ASM_ARC_ATOMIC_H
-#ifdef __KERNEL__
-
#ifndef __ASSEMBLY__
#include <linux/types.h>
#endif
#endif
-
-#endif
#error only <linux/bitops.h> can be included directly
#endif
-#ifdef __KERNEL__
-
#ifndef __ASSEMBLY__
#include <linux/types.h>
#endif /* !__ASSEMBLY__ */
-#endif /* __KERNEL__ */
-
#endif
unsigned long address);
void die(const char *str, struct pt_regs *regs, unsigned long address);
-#define BUG() do { \
- dump_stack(); \
- pr_warn("Kernel BUG in %s: %s: %d!\n", \
- __FILE__, __func__, __LINE__); \
+#define BUG() do { \
+ pr_warn("BUG: failure at %s:%d/%s()!\n", __FILE__, __LINE__, __func__); \
+ dump_stack(); \
} while (0)
#define HAVE_ARCH_BUG
#define CACHE_LINE_MASK (~(L1_CACHE_BYTES - 1))
/*
- * ARC700 doesn't cache any access in top 256M.
+ * ARC700 doesn't cache any access in top 1G (0xc000_0000 to 0xFFFF_FFFF)
* Ideal for wiring memory mapped peripherals as we don't need to do
* explicit uncached accesses (LD.di/ST.di) hence more portable drivers
*/
#ifndef _ASM_ARC_CURRENT_H
#define _ASM_ARC_CURRENT_H
-#ifdef __KERNEL__
-
#ifndef __ASSEMBLY__
#ifdef CONFIG_ARC_CURR_IN_REG
#endif /* ! __ASSEMBLY__ */
-#endif /* __KERNEL__ */
-
#endif /* _ASM_ARC_CURRENT_H */
#include <asm/byteorder.h>
#include <asm/page.h>
-#define PCI_IOBASE ((void __iomem *)0)
-
extern void __iomem *ioremap(unsigned long physaddr, unsigned long size);
extern void __iomem *ioremap_prot(phys_addr_t offset, unsigned long size,
unsigned long flags);
* -Conditionally disable interrupts (if they are not enabled, don't disable)
*/
-#ifdef __KERNEL__
-
#include <asm/arcregs.h>
/* status32 Reg bits related to Interrupt Handling */
#endif /* __ASSEMBLY__ */
-#endif /* KERNEL */
-
#endif
* register API yet */
#undef DBG_MAX_REG_NUM
-#define GDB_MAX_REGS 39
+#define GDB_MAX_REGS 87
#define BREAK_INSTR_SIZE 2
#define CACHE_FLUSH_IS_SAFE 1
extern void kgdb_trap(struct pt_regs *regs);
-enum arc700_linux_regnums {
+/* This is the numbering of registers according to the GDB. See GDB's
+ * arc-tdep.h for details.
+ *
+ * Registers are ordered for GDB 7.5. It is incompatible with GDB 6.8. */
+enum arc_linux_regnums {
_R0 = 0,
_R1, _R2, _R3, _R4, _R5, _R6, _R7, _R8, _R9, _R10, _R11, _R12, _R13,
_R14, _R15, _R16, _R17, _R18, _R19, _R20, _R21, _R22, _R23, _R24,
_R25, _R26,
- _BTA = 27,
- _LP_START = 28,
- _LP_END = 29,
- _LP_COUNT = 30,
- _STATUS32 = 31,
- _BLINK = 32,
- _FP = 33,
- __SP = 34,
- _EFA = 35,
- _RET = 36,
- _ORIG_R8 = 37,
- _STOP_PC = 38
+ _FP = 27,
+ __SP = 28,
+ _R30 = 30,
+ _BLINK = 31,
+ _LP_COUNT = 60,
+ _STOP_PC = 64,
+ _RET = 64,
+ _LP_START = 65,
+ _LP_END = 66,
+ _STATUS32 = 67,
+ _ECR = 76,
+ _BTA = 82,
};
#else
#ifndef __ASM_ARC_PROCESSOR_H
#define __ASM_ARC_PROCESSOR_H
-#ifdef __KERNEL__
-
#ifndef __ASSEMBLY__
#include <asm/ptrace.h>
+#ifdef CONFIG_ARC_FPU_SAVE_RESTORE
+/* These DPFP regs need to be saved/restored across ctx-sw */
+struct arc_fpu {
+ struct {
+ unsigned int l, h;
+ } aux_dpfp[2];
+};
+#endif
+
/* Arch specific stuff which needs to be saved per task.
* However these items are not so important so as to earn a place in
* struct thread_info
*/
#define TASK_UNMAPPED_BASE (TASK_SIZE / 3)
-#endif /* __KERNEL__ */
-
#endif /* __ASM_ARC_PROCESSOR_H */
};
extern int root_mountflags, end_mem;
-extern int running_on_hw;
void setup_processor(void);
void __init setup_arch_memory(void);
/* TBD: stop exporting it for direct population by platform */
extern struct plat_smp_ops plat_smp_ops;
-#endif /* CONFIG_SMP */
+#else /* CONFIG_SMP */
+
+static inline void smp_init_cpus(void) {}
+static inline const char *arc_platform_smp_cpuinfo(void)
+{
+ return "";
+}
+
+#endif /* !CONFIG_SMP */
/*
* ARC700 doesn't support atomic Read-Modify-Write ops.
#include <linux/types.h>
-#ifdef __KERNEL__
-
#define __HAVE_ARCH_MEMSET
#define __HAVE_ARCH_MEMCPY
#define __HAVE_ARCH_MEMCMP
extern int strcmp(const char *cs, const char *ct);
extern __kernel_size_t strlen(const char *);
-#endif /* __KERNEL__ */
#endif /* _ASM_ARC_STRING_H */
#ifndef _ASM_ARC_SYSCALLS_H
#define _ASM_ARC_SYSCALLS_H 1
-#ifdef __KERNEL__
-
#include <linux/compiler.h>
#include <linux/linkage.h>
#include <linux/types.h>
#include <asm-generic/syscalls.h>
-#endif /* __KERNEL__ */
-
#endif
#ifndef _ASM_THREAD_INFO_H
#define _ASM_THREAD_INFO_H
-#ifdef __KERNEL__
-
#include <asm/page.h>
#ifdef CONFIG_16KSTACKS
* syscall, so all that reamins to be tested is _TIF_WORK_MASK
*/
-#endif /* __KERNEL__ */
-
#endif /* _ASM_THREAD_INFO_H */
#include <asm-generic/unaligned.h>
#include <asm/ptrace.h>
-#ifdef CONFIG_ARC_MISALIGN_ACCESS
+#ifdef CONFIG_ARC_EMUL_UNALIGNED
int misaligned_fixup(unsigned long address, struct pt_regs *regs,
struct callee_regs *cregs);
#else
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_ARC_DW2_UNWIND) += unwind.o
obj-$(CONFIG_KPROBES) += kprobes.o
-obj-$(CONFIG_ARC_MISALIGN_ACCESS) += unaligned.o
+obj-$(CONFIG_ARC_EMUL_UNALIGNED) += unaligned.o
obj-$(CONFIG_KGDB) += kgdb.o
obj-$(CONFIG_ARC_METAWARE_HLINK) += arc_hostlink.o
obj-$(CONFIG_PERF_EVENTS) += perf_event.o
#include <linux/uaccess.h>
#include <asm/disasm.h>
-#if defined(CONFIG_KGDB) || defined(CONFIG_ARC_MISALIGN_ACCESS) || \
+#if defined(CONFIG_KGDB) || defined(CONFIG_ARC_EMUL_UNALIGNED) || \
defined(CONFIG_KPROBES)
/* disasm_instr: Analyses instruction at addr, stores
return instr.is_branch;
}
-#endif /* CONFIG_KGDB || CONFIG_ARC_MISALIGN_ACCESS || CONFIG_KPROBES */
+#endif /* CONFIG_KGDB || CONFIG_ARC_EMUL_UNALIGNED || CONFIG_KPROBES */
st r0, [@uboot_tag]
st r2, [@uboot_arg]
- ; Identify if running on ISS vs Silicon
- ; IDENTITY Reg [ 3 2 1 0 ]
- ; (chip-id) ^^^^^ ==> 0xffff for ISS
- lr r0, [identity]
- lsr r3, r0, 16
- cmp r3, 0xffff
- mov.z r4, 0
- mov.nz r4, 1
- st r4, [@running_on_hw]
-
; setup "current" tsk and optionally cache it in dedicated r25
mov r9, @init_task
SET_CURR_TASK_ON_CPU r9, r0 ; r9 = tsk, r0 = scratch
return -1;
}
-unsigned long kgdb_arch_pc(int exception, struct pt_regs *regs)
-{
- return instruction_pointer(regs);
-}
-
int kgdb_arch_init(void)
{
single_step_data.armed = 0;
pr_err("This core does not have performance counters!\n");
return -ENODEV;
}
+ BUG_ON(pct_bcr.c > ARC_PMU_MAX_HWEVENTS);
- arc_pmu = devm_kzalloc(&pdev->dev, sizeof(struct arc_pmu),
- GFP_KERNEL);
+ READ_BCR(ARC_REG_CC_BUILD, cc_bcr);
+ if (!cc_bcr.v) {
+ pr_err("Performance counters exist, but no countable conditions?\n");
+ return -ENODEV;
+ }
+
+ arc_pmu = devm_kzalloc(&pdev->dev, sizeof(struct arc_pmu), GFP_KERNEL);
if (!arc_pmu)
return -ENOMEM;
arc_pmu->n_counters = pct_bcr.c;
- BUG_ON(arc_pmu->n_counters > ARC_PMU_MAX_HWEVENTS);
-
arc_pmu->counter_size = 32 + (pct_bcr.s << 4);
- pr_info("ARC PMU found with %d counters of size %d bits\n",
- arc_pmu->n_counters, arc_pmu->counter_size);
-
- READ_BCR(ARC_REG_CC_BUILD, cc_bcr);
-
- if (!cc_bcr.v)
- pr_err("Strange! Performance counters exist, but no countable conditions?\n");
- pr_info("ARC PMU has %d countable conditions\n", cc_bcr.c);
+ pr_info("ARC perf\t: %d counters (%d bits), %d countable conditions\n",
+ arc_pmu->n_counters, arc_pmu->counter_size, cc_bcr.c);
cc_name.str[8] = 0;
for (i = 0; i < PERF_COUNT_HW_MAX; i++)
#include <linux/console.h>
#include <linux/module.h>
#include <linux/cpu.h>
+#include <linux/clk-provider.h>
#include <linux/of_fdt.h>
+#include <linux/of_platform.h>
#include <linux/cache.h>
#include <asm/sections.h>
#include <asm/arcregs.h>
#include <asm/unwind.h>
#include <asm/clk.h>
#include <asm/mach_desc.h>
+#include <asm/smp.h>
#define FIX_PTR(x) __asm__ __volatile__(";" : "+r"(x))
-int running_on_hw = 1; /* vs. on ISS */
-
/* Part of U-boot ABI: see head.S */
int __initdata uboot_tag;
char __initdata *uboot_arg;
static void read_arc_build_cfg_regs(void)
{
struct bcr_perip uncached_space;
+ struct bcr_generic bcr;
struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
FIX_PTR(cpu);
READ_BCR(AUX_IDENTITY, cpu->core);
+ READ_BCR(ARC_REG_ISA_CFG_BCR, cpu->isa);
- cpu->timers = read_aux_reg(ARC_REG_TIMERS_BCR);
+ READ_BCR(ARC_REG_TIMERS_BCR, cpu->timers);
cpu->vec_base = read_aux_reg(AUX_INTR_VEC_BASE);
READ_BCR(ARC_REG_D_UNCACH_BCR, uncached_space);
cpu->uncached_base = uncached_space.start << 24;
- cpu->extn.mul = read_aux_reg(ARC_REG_MUL_BCR);
- cpu->extn.swap = read_aux_reg(ARC_REG_SWAP_BCR);
- cpu->extn.norm = read_aux_reg(ARC_REG_NORM_BCR);
- cpu->extn.minmax = read_aux_reg(ARC_REG_MIXMAX_BCR);
- cpu->extn.barrel = read_aux_reg(ARC_REG_BARREL_BCR);
- READ_BCR(ARC_REG_MAC_BCR, cpu->extn_mac_mul);
+ READ_BCR(ARC_REG_MUL_BCR, cpu->extn_mpy);
- cpu->extn.ext_arith = read_aux_reg(ARC_REG_EXTARITH_BCR);
- cpu->extn.crc = read_aux_reg(ARC_REG_CRC_BCR);
+ cpu->extn.norm = read_aux_reg(ARC_REG_NORM_BCR) > 1 ? 1 : 0; /* 2,3 */
+ cpu->extn.barrel = read_aux_reg(ARC_REG_BARREL_BCR) > 1 ? 1 : 0; /* 2,3 */
+ cpu->extn.swap = read_aux_reg(ARC_REG_SWAP_BCR) ? 1 : 0; /* 1,3 */
+ cpu->extn.crc = read_aux_reg(ARC_REG_CRC_BCR) ? 1 : 0;
+ cpu->extn.minmax = read_aux_reg(ARC_REG_MIXMAX_BCR) > 1 ? 1 : 0; /* 2 */
/* Note that we read the CCM BCRs independent of kernel config
* This is to catch the cases where user doesn't know that
read_decode_mmu_bcr();
read_decode_cache_bcr();
- READ_BCR(ARC_REG_FP_BCR, cpu->fp);
- READ_BCR(ARC_REG_DPFP_BCR, cpu->dpfp);
+ {
+ struct bcr_fp_arcompact sp, dp;
+ struct bcr_bpu_arcompact bpu;
+
+ READ_BCR(ARC_REG_FP_BCR, sp);
+ READ_BCR(ARC_REG_DPFP_BCR, dp);
+ cpu->extn.fpu_sp = sp.ver ? 1 : 0;
+ cpu->extn.fpu_dp = dp.ver ? 1 : 0;
+
+ READ_BCR(ARC_REG_BPU_BCR, bpu);
+ cpu->bpu.ver = bpu.ver;
+ cpu->bpu.full = bpu.fam ? 1 : 0;
+ if (bpu.ent) {
+ cpu->bpu.num_cache = 256 << (bpu.ent - 1);
+ cpu->bpu.num_pred = 256 << (bpu.ent - 1);
+ }
+ }
+
+ READ_BCR(ARC_REG_AP_BCR, bcr);
+ cpu->extn.ap = bcr.ver ? 1 : 0;
+
+ READ_BCR(ARC_REG_SMART_BCR, bcr);
+ cpu->extn.smart = bcr.ver ? 1 : 0;
+
+ cpu->extn.debug = cpu->extn.ap | cpu->extn.smart;
}
static const struct cpuinfo_data arc_cpu_tbl[] = {
- { {0x10, "ARCTangent A5"}, 0x1F},
{ {0x20, "ARC 600" }, 0x2F},
{ {0x30, "ARC 700" }, 0x33},
{ {0x34, "ARC 700 R4.10"}, 0x34},
+ { {0x35, "ARC 700 R4.11"}, 0x35},
{ {0x00, NULL } }
};
+#define IS_AVAIL1(v, str) ((v) ? str : "")
+#define IS_USED(cfg) (IS_ENABLED(cfg) ? "" : "(not used) ")
+#define IS_AVAIL2(v, str, cfg) IS_AVAIL1(v, str), IS_AVAIL1(v, IS_USED(cfg))
+
static char *arc_cpu_mumbojumbo(int cpu_id, char *buf, int len)
{
- int n = 0;
struct cpuinfo_arc *cpu = &cpuinfo_arc700[cpu_id];
struct bcr_identity *core = &cpu->core;
const struct cpuinfo_data *tbl;
- int be = 0;
-#ifdef CONFIG_CPU_BIG_ENDIAN
- be = 1;
-#endif
+ char *isa_nm;
+ int i, be, atomic;
+ int n = 0;
+
FIX_PTR(cpu);
+ {
+ isa_nm = "ARCompact";
+ be = IS_ENABLED(CONFIG_CPU_BIG_ENDIAN);
+
+ atomic = cpu->isa.atomic1;
+ if (!cpu->isa.ver) /* ISA BCR absent, use Kconfig info */
+ atomic = IS_ENABLED(CONFIG_ARC_HAS_LLSC);
+ }
+
n += scnprintf(buf + n, len - n,
- "\nARC IDENTITY\t: Family [%#02x]"
- " Cpu-id [%#02x] Chip-id [%#4x]\n",
- core->family, core->cpu_id,
- core->chip_id);
+ "\nIDENTITY\t: ARCVER [%#02x] ARCNUM [%#02x] CHIPID [%#4x]\n",
+ core->family, core->cpu_id, core->chip_id);
for (tbl = &arc_cpu_tbl[0]; tbl->info.id != 0; tbl++) {
if ((core->family >= tbl->info.id) &&
(core->family <= tbl->up_range)) {
n += scnprintf(buf + n, len - n,
- "processor\t: %s %s\n",
- tbl->info.str,
- be ? "[Big Endian]" : "");
+ "processor [%d]\t: %s (%s ISA) %s\n",
+ cpu_id, tbl->info.str, isa_nm,
+ IS_AVAIL1(be, "[Big-Endian]"));
break;
}
}
(unsigned int)(arc_get_core_freq() / 1000000),
(unsigned int)(arc_get_core_freq() / 10000) % 100);
- n += scnprintf(buf + n, len - n, "Timers\t\t: %s %s\n",
- (cpu->timers & 0x200) ? "TIMER1" : "",
- (cpu->timers & 0x100) ? "TIMER0" : "");
+ n += scnprintf(buf + n, len - n, "Timers\t\t: %s%s%s%s\nISA Extn\t: ",
+ IS_AVAIL1(cpu->timers.t0, "Timer0 "),
+ IS_AVAIL1(cpu->timers.t1, "Timer1 "),
+ IS_AVAIL2(cpu->timers.rtsc, "64-bit RTSC ", CONFIG_ARC_HAS_RTSC));
- n += scnprintf(buf + n, len - n, "Vect Tbl Base\t: %#x\n",
- cpu->vec_base);
+ n += i = scnprintf(buf + n, len - n, "%s%s",
+ IS_AVAIL2(atomic, "atomic ", CONFIG_ARC_HAS_LLSC));
- n += scnprintf(buf + n, len - n, "UNCACHED Base\t: %#x\n",
- cpu->uncached_base);
+ if (i)
+ n += scnprintf(buf + n, len - n, "\n\t\t: ");
- return buf;
-}
+ n += scnprintf(buf + n, len - n, "%s%s%s%s%s%s%s%s\n",
+ IS_AVAIL1(cpu->extn_mpy.ver, "mpy "),
+ IS_AVAIL1(cpu->extn.norm, "norm "),
+ IS_AVAIL1(cpu->extn.barrel, "barrel-shift "),
+ IS_AVAIL1(cpu->extn.swap, "swap "),
+ IS_AVAIL1(cpu->extn.minmax, "minmax "),
+ IS_AVAIL1(cpu->extn.crc, "crc "),
+ IS_AVAIL2(1, "swape", CONFIG_ARC_HAS_SWAPE));
-static const struct id_to_str mul_type_nm[] = {
- { 0x0, "N/A"},
- { 0x1, "32x32 (spl Result Reg)" },
- { 0x2, "32x32 (ANY Result Reg)" }
-};
+ if (cpu->bpu.ver)
+ n += scnprintf(buf + n, len - n,
+ "BPU\t\t: %s%s match, cache:%d, Predict Table:%d\n",
+ IS_AVAIL1(cpu->bpu.full, "full"),
+ IS_AVAIL1(!cpu->bpu.full, "partial"),
+ cpu->bpu.num_cache, cpu->bpu.num_pred);
-static const struct id_to_str mac_mul_nm[] = {
- {0x0, "N/A"},
- {0x1, "N/A"},
- {0x2, "Dual 16 x 16"},
- {0x3, "N/A"},
- {0x4, "32x16"},
- {0x5, "N/A"},
- {0x6, "Dual 16x16 and 32x16"}
-};
+ return buf;
+}
static char *arc_extn_mumbojumbo(int cpu_id, char *buf, int len)
{
struct cpuinfo_arc *cpu = &cpuinfo_arc700[cpu_id];
FIX_PTR(cpu);
-#define IS_AVAIL1(var, str) ((var) ? str : "")
-#define IS_AVAIL2(var, str) ((var == 0x2) ? str : "")
-#define IS_USED(cfg) (IS_ENABLED(cfg) ? "(in-use)" : "(not used)")
n += scnprintf(buf + n, len - n,
- "Extn [700-Base]\t: %s %s %s %s %s %s\n",
- IS_AVAIL2(cpu->extn.norm, "norm,"),
- IS_AVAIL2(cpu->extn.barrel, "barrel-shift,"),
- IS_AVAIL1(cpu->extn.swap, "swap,"),
- IS_AVAIL2(cpu->extn.minmax, "minmax,"),
- IS_AVAIL1(cpu->extn.crc, "crc,"),
- IS_AVAIL2(cpu->extn.ext_arith, "ext-arith"));
-
- n += scnprintf(buf + n, len - n, "Extn [700-MPY]\t: %s",
- mul_type_nm[cpu->extn.mul].str);
-
- n += scnprintf(buf + n, len - n, " MAC MPY: %s\n",
- mac_mul_nm[cpu->extn_mac_mul.type].str);
-
- if (cpu->core.family == 0x34) {
- n += scnprintf(buf + n, len - n,
- "Extn [700-4.10]\t: LLOCK/SCOND %s, SWAPE %s, RTSC %s\n",
- IS_USED(CONFIG_ARC_HAS_LLSC),
- IS_USED(CONFIG_ARC_HAS_SWAPE),
- IS_USED(CONFIG_ARC_HAS_RTSC));
- }
-
- n += scnprintf(buf + n, len - n, "Extn [CCM]\t: %s",
- !(cpu->dccm.sz || cpu->iccm.sz) ? "N/A" : "");
-
- if (cpu->dccm.sz)
- n += scnprintf(buf + n, len - n, "DCCM: @ %x, %d KB ",
- cpu->dccm.base_addr, TO_KB(cpu->dccm.sz));
-
- if (cpu->iccm.sz)
- n += scnprintf(buf + n, len - n, "ICCM: @ %x, %d KB",
+ "Vector Table\t: %#x\nUncached Base\t: %#x\n",
+ cpu->vec_base, cpu->uncached_base);
+
+ if (cpu->extn.fpu_sp || cpu->extn.fpu_dp)
+ n += scnprintf(buf + n, len - n, "FPU\t\t: %s%s\n",
+ IS_AVAIL1(cpu->extn.fpu_sp, "SP "),
+ IS_AVAIL1(cpu->extn.fpu_dp, "DP "));
+
+ if (cpu->extn.debug)
+ n += scnprintf(buf + n, len - n, "DEBUG\t\t: %s%s%s\n",
+ IS_AVAIL1(cpu->extn.ap, "ActionPoint "),
+ IS_AVAIL1(cpu->extn.smart, "smaRT "),
+ IS_AVAIL1(cpu->extn.rtt, "RTT "));
+
+ if (cpu->dccm.sz || cpu->iccm.sz)
+ n += scnprintf(buf + n, len - n, "Extn [CCM]\t: DCCM @ %x, %d KB / ICCM: @ %x, %d KB\n",
+ cpu->dccm.base_addr, TO_KB(cpu->dccm.sz),
cpu->iccm.base_addr, TO_KB(cpu->iccm.sz));
- n += scnprintf(buf + n, len - n, "\nExtn [FPU]\t: %s",
- !(cpu->fp.ver || cpu->dpfp.ver) ? "N/A" : "");
-
- if (cpu->fp.ver)
- n += scnprintf(buf + n, len - n, "SP [v%d] %s",
- cpu->fp.ver, cpu->fp.fast ? "(fast)" : "");
-
- if (cpu->dpfp.ver)
- n += scnprintf(buf + n, len - n, "DP [v%d] %s",
- cpu->dpfp.ver, cpu->dpfp.fast ? "(fast)" : "");
-
- n += scnprintf(buf + n, len - n, "\n");
-
n += scnprintf(buf + n, len - n,
"OS ABI [v3]\t: no-legacy-syscalls\n");
return buf;
}
-static void arc_chk_ccms(void)
+static void arc_chk_core_config(void)
{
-#if defined(CONFIG_ARC_HAS_DCCM) || defined(CONFIG_ARC_HAS_ICCM)
struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
+ int fpu_enabled;
+
+ if (!cpu->timers.t0)
+ panic("Timer0 is not present!\n");
+
+ if (!cpu->timers.t1)
+ panic("Timer1 is not present!\n");
+
+ if (IS_ENABLED(CONFIG_ARC_HAS_RTSC) && !cpu->timers.rtsc)
+ panic("RTSC is not present\n");
#ifdef CONFIG_ARC_HAS_DCCM
/*
if (CONFIG_ARC_ICCM_SZ != cpu->iccm.sz)
panic("Linux built with incorrect ICCM Size\n");
#endif
-#endif
-}
-/*
- * Ensure that FP hardware and kernel config match
- * -If hardware contains DPFP, kernel needs to save/restore FPU state
- * across context switches
- * -If hardware lacks DPFP, but kernel configured to save FPU state then
- * kernel trying to access non-existant DPFP regs will crash
- *
- * We only check for Dbl precision Floating Point, because only DPFP
- * hardware has dedicated regs which need to be saved/restored on ctx-sw
- * (Single Precision uses core regs), thus kernel is kind of oblivious to it
- */
-static void arc_chk_fpu(void)
-{
- struct cpuinfo_arc *cpu = &cpuinfo_arc700[smp_processor_id()];
+ /*
+ * FP hardware/software config sanity
+ * -If hardware contains DPFP, kernel needs to save/restore FPU state
+ * -If not, it will crash trying to save/restore the non-existant regs
+ *
+ * (only DPDP checked since SP has no arch visible regs)
+ */
+ fpu_enabled = IS_ENABLED(CONFIG_ARC_FPU_SAVE_RESTORE);
- if (cpu->dpfp.ver) {
-#ifndef CONFIG_ARC_FPU_SAVE_RESTORE
- pr_warn("DPFP support broken in this kernel...\n");
-#endif
- } else {
-#ifdef CONFIG_ARC_FPU_SAVE_RESTORE
- panic("H/w lacks DPFP support, apps won't work\n");
-#endif
- }
+ if (cpu->extn.fpu_dp && !fpu_enabled)
+ pr_warn("CONFIG_ARC_FPU_SAVE_RESTORE needed for working apps\n");
+ else if (!cpu->extn.fpu_dp && fpu_enabled)
+ panic("FPU non-existent, disable CONFIG_ARC_FPU_SAVE_RESTORE\n");
}
/*
arc_mmu_init();
arc_cache_init();
- arc_chk_ccms();
printk(arc_extn_mumbojumbo(cpu_id, str, sizeof(str)));
-
-#ifdef CONFIG_SMP
printk(arc_platform_smp_cpuinfo());
-#endif
- arc_chk_fpu();
+ arc_chk_core_config();
}
static inline int is_kernel(unsigned long addr)
machine_desc->init_early();
setup_processor();
-
-#ifdef CONFIG_SMP
smp_init_cpus();
-#endif
-
setup_arch_memory();
/* copy flat DT out of .init and then unflatten it */
static int __init customize_machine(void)
{
- /* Add platform devices */
+ of_clk_init(NULL);
+ /*
+ * Traverses flattened DeviceTree - registering platform devices
+ * (if any) complete with their resources
+ */
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+
if (machine_desc->init_machine)
machine_desc->init_machine();
seq_printf(m, arc_cpu_mumbojumbo(cpu_id, str, PAGE_SIZE));
- seq_printf(m, "Bogo MIPS : \t%lu.%02lu\n",
+ seq_printf(m, "Bogo MIPS\t: %lu.%02lu\n",
loops_per_jiffy / (500000 / HZ),
(loops_per_jiffy / (5000 / HZ)) % 100);
seq_printf(m, arc_mmu_mumbojumbo(cpu_id, str, PAGE_SIZE));
-
seq_printf(m, arc_cache_mumbojumbo(cpu_id, str, PAGE_SIZE));
-
seq_printf(m, arc_extn_mumbojumbo(cpu_id, str, PAGE_SIZE));
-
-#ifdef CONFIG_SMP
seq_printf(m, arc_platform_smp_cpuinfo());
-#endif
free_page((unsigned long)str);
done:
const char *arc_platform_smp_cpuinfo(void)
{
- return plat_smp_ops.info;
+ return plat_smp_ops.info ? : "";
}
/*
*/
void flush_icache_range(unsigned long kstart, unsigned long kend)
{
- unsigned int tot_sz, off, sz;
- unsigned long phy, pfn;
+ unsigned int tot_sz;
- /* printk("Kernel Cache Cohenercy: %lx to %lx\n",kstart, kend); */
-
- /* This is not the right API for user virtual address */
- if (kstart < TASK_SIZE) {
- BUG_ON("Flush icache range for user virtual addr space");
- return;
- }
+ WARN(kstart < TASK_SIZE, "%s() can't handle user vaddr", __func__);
/* Shortcut for bigger flush ranges.
* Here we don't care if this was kernel virtual or phy addr
* straddles across 2 virtual pages and hence need for loop
*/
while (tot_sz > 0) {
+ unsigned int off, sz;
+ unsigned long phy, pfn;
+
off = kstart % PAGE_SIZE;
pfn = vmalloc_to_pfn((void *)kstart);
phy = (pfn << PAGE_SHIFT) + off;
int n = 0;
struct cpuinfo_arc_mmu *p_mmu = &cpuinfo_arc700[cpu_id].mmu;
- n += scnprintf(buf + n, len - n, "ARC700 MMU [v%x]\t: %dk PAGE, ",
- p_mmu->ver, TO_KB(p_mmu->pg_sz));
-
n += scnprintf(buf + n, len - n,
- "J-TLB %d (%dx%d), uDTLB %d, uITLB %d, %s\n",
+ "MMU [v%x]\t: %dk PAGE, JTLB %d (%dx%d), uDTLB %d, uITLB %d %s\n",
+ p_mmu->ver, TO_KB(p_mmu->pg_sz),
p_mmu->num_tlb, p_mmu->sets, p_mmu->ways,
p_mmu->u_dtlb, p_mmu->u_itlb,
- IS_ENABLED(CONFIG_ARC_MMU_SASID) ? "SASID" : "");
+ IS_ENABLED(CONFIG_ARC_MMU_SASID) ? ",SASID" : "");
return buf;
}
menuconfig ARC_PLAT_FPGA_LEGACY
bool "\"Legacy\" ARC FPGA dev Boards"
- select ISS_SMP_EXTN if SMP
+ select ARC_HAS_COH_CACHES if SMP
help
Support for ARC development boards, provided by Synopsys.
These are based on FPGA or ISS. e.g.
if ARC_PLAT_FPGA_LEGACY
-config ARC_BOARD_ANGEL4
- bool "ARC Angel4"
- default y
- help
- ARC Angel4 FPGA Ref Platform (Xilinx Virtex Based)
-
-config ARC_BOARD_ML509
- bool "ML509"
- help
- ARC ML509 FPGA Ref Platform (Xilinx Virtex-5 Based)
-
config ISS_SMP_EXTN
bool "ARC SMP Extensions (ISS Models only)"
default n
+++ /dev/null
-/*
- * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * vineetg: Feb 2009
- * -For AA4 board, IRQ assignments to peripherals
- */
-
-#ifndef __PLAT_IRQ_H
-#define __PLAT_IRQ_H
-
-#define UART0_IRQ 5
-#define UART1_IRQ 10
-#define UART2_IRQ 11
-
-#define IDE_IRQ 13
-#define PCI_IRQ 14
-#define PS2_IRQ 15
-
-#ifdef CONFIG_SMP
-#define IDU_INTERRUPT_0 16
-#endif
-
-#endif
+++ /dev/null
-/*
- * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * vineetg: Feb 2009
- * -For AA4 board, System Memory Map for Peripherals etc
- */
-
-#ifndef __PLAT_MEMMAP_H
-#define __PLAT_MEMMAP_H
-
-#define UART0_BASE 0xC0FC1000
-#define UART1_BASE 0xC0FC1100
-
-#define IDE_CONTROLLER_BASE 0xC0FC9000
-
-#define AHB_PCI_HOST_BRG_BASE 0xC0FD0000
-
-#define PGU_BASEADDR 0xC0FC8000
-#define VLCK_ADDR 0xC0FCF028
-
-#define BVCI_LAT_UNIT_BASE 0xC0FED000
-
-#define PS2_BASE_ADDR 0xC0FCC000
-
-#endif
* published by the Free Software Foundation.
*/
-#include <linux/types.h>
#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-#include <linux/console.h>
-#include <linux/of_platform.h>
-#include <asm/setup.h>
-#include <asm/clk.h>
#include <asm/mach_desc.h>
-#include <plat/memmap.h>
#include <plat/smp.h>
-#include <plat/irq.h>
-
-static void __init plat_fpga_early_init(void)
-{
- pr_info("[plat-arcfpga]: registering early dev resources\n");
-
-#ifdef CONFIG_ISS_SMP_EXTN
- iss_model_init_early_smp();
-#endif
-}
-
-static void __init plat_fpga_populate_dev(void)
-{
- /*
- * Traverses flattened DeviceTree - registering platform devices
- * (if any) complete with their resources
- */
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
/*----------------------- Machine Descriptions ------------------------------
*
* callback set, by matching the DT compatible name.
*/
-static const char *aa4_compat[] __initconst = {
+static const char *legacy_fpga_compat[] __initconst = {
"snps,arc-angel4",
- NULL,
-};
-
-MACHINE_START(ANGEL4, "angel4")
- .dt_compat = aa4_compat,
- .init_early = plat_fpga_early_init,
- .init_machine = plat_fpga_populate_dev,
-#ifdef CONFIG_ISS_SMP_EXTN
- .init_smp = iss_model_init_smp,
-#endif
-MACHINE_END
-
-static const char *ml509_compat[] __initconst = {
"snps,arc-ml509",
NULL,
};
-MACHINE_START(ML509, "ml509")
- .dt_compat = ml509_compat,
- .init_early = plat_fpga_early_init,
- .init_machine = plat_fpga_populate_dev,
-#ifdef CONFIG_SMP
+MACHINE_START(LEGACY_FPGA, "legacy_fpga")
+ .dt_compat = legacy_fpga_compat,
+#ifdef CONFIG_ISS_SMP_EXTN
+ .init_early = iss_model_init_early_smp,
.init_smp = iss_model_init_smp,
#endif
MACHINE_END
-static const char *nsimosci_compat[] __initconst = {
+static const char *simulation_compat[] __initconst = {
+ "snps,nsim",
"snps,nsimosci",
NULL,
};
-MACHINE_START(NSIMOSCI, "nsimosci")
- .dt_compat = nsimosci_compat,
- .init_early = NULL,
- .init_machine = plat_fpga_populate_dev,
+MACHINE_START(SIMULATION, "simulation")
+ .dt_compat = simulation_compat,
MACHINE_END
#include <linux/smp.h>
#include <linux/irq.h>
-#include <plat/irq.h>
#include <plat/smp.h>
+#define IDU_INTERRUPT_0 16
+
static char smp_cpuinfo_buf[128];
/*
menuconfig ARC_PLAT_TB10X
bool "Abilis TB10x"
- select COMMON_CLK
select PINCTRL
select PINCTRL_TB10X
select PINMUX
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
-
#include <linux/init.h>
-#include <linux/of_platform.h>
-#include <linux/clk-provider.h>
-#include <linux/pinctrl/consumer.h>
-
#include <asm/mach_desc.h>
-
-static void __init tb10x_platform_init(void)
-{
- of_clk_init(NULL);
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
static const char *tb10x_compat[] __initdata = {
"abilis,arc-tb10x",
NULL,
MACHINE_START(TB10x, "tb10x")
.dt_compat = tb10x_compat,
- .init_machine = tb10x_platform_init,
MACHINE_END
select SPARSE_IRQ
select USE_OF
-config ARCH_INTEGRATOR
- bool "ARM Ltd. Integrator family"
- select ARM_AMBA
- select ARM_PATCH_PHYS_VIRT if MMU
- select AUTO_ZRELADDR
- select COMMON_CLK
- select COMMON_CLK_VERSATILE
- select GENERIC_CLOCKEVENTS
- select HAVE_TCM
- select ICST
- select MULTI_IRQ_HANDLER
- select PLAT_VERSATILE
- select SPARSE_IRQ
- select USE_OF
- select VERSATILE_FPGA_IRQ
- help
- Support for ARM's Integrator platform.
-
config ARCH_REALVIEW
bool "ARM Ltd. RealView family"
select ARCH_WANT_OPTIONAL_GPIOLIB
select ICST
select NEED_MACH_MEMORY_H
select PLAT_VERSATILE
+ select PLAT_VERSATILE_SCHED_CLOCK
help
This enables support for ARM Ltd RealView boards.
select ICST
select PLAT_VERSATILE
select PLAT_VERSATILE_CLOCK
+ select PLAT_VERSATILE_SCHED_CLOCK
select VERSATILE_FPGA_IRQ
help
This enables support for ARM Ltd Versatile board.
select IRQ_DOMAIN
select NEED_MACH_IO_H if PCCARD
select PINCTRL
- select PINCTRL_AT91 if USE_OF
+ select PINCTRL_AT91
+ select USE_OF
help
This enables support for systems based on Atmel
- AT91RM9200 and AT91SAM9* processors.
+ AT91RM9200, AT91SAM9 and SAMA5 processors.
config ARCH_CLPS711X
bool "Cirrus Logic CLPS711x/EP721x/EP731x-based"
#
source "arch/arm/mach-mvebu/Kconfig"
+source "arch/arm/mach-asm9260/Kconfig"
+
source "arch/arm/mach-at91/Kconfig"
source "arch/arm/mach-axxia/Kconfig"
menu "Bus support"
-config ARM_AMBA
- bool
-
config ISA
bool
help
prompt "Kernel low-level debugging port"
depends on DEBUG_LL
+ config DEBUG_ASM9260_UART
+ bool "Kernel low-level debugging via asm9260 UART"
+ depends on MACH_ASM9260
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to an UART or USART port on asm9260 based
+ machines.
+
+ DEBUG_UART_PHYS | DEBUG_UART_VIRT
+
+ 0x80000000 | 0xf0000000 | UART0
+ 0x80004000 | 0xf0004000 | UART1
+ 0x80008000 | 0xf0008000 | UART2
+ 0x8000c000 | 0xf000c000 | UART3
+ 0x80010000 | 0xf0010000 | UART4
+ 0x80014000 | 0xf0014000 | UART5
+ 0x80018000 | 0xf0018000 | UART6
+ 0x8001c000 | 0xf001c000 | UART7
+ 0x80020000 | 0xf0020000 | UART8
+ 0x80024000 | 0xf0024000 | UART9
+
config AT91_DEBUG_LL_DBGU0
bool "Kernel low-level debugging on rm9200, 9260/9g20, 9261/9g10 and 9rl"
depends on HAVE_AT91_DBGU0
config DEBUG_BCM_5301X
bool "Kernel low-level debugging on BCM5301X UART1"
depends on ARCH_BCM_5301X
- select DEBUG_UART_PL01X
+ select DEBUG_UART_8250
config DEBUG_BCM_KONA_UART
bool "Kernel low-level debugging messages via BCM KONA UART"
Say Y here if you want kernel low-level debugging support
on Marvell Berlin SoC based platforms.
+ config DEBUG_BRCMSTB_UART
+ bool "Use BRCMSTB UART for low-level debug"
+ depends on ARCH_BRCMSTB
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want the debug print routines to direct
+ their output to the first serial port on these devices.
+
+ If you have a Broadcom STB chip and would like early print
+ messages to appear over the UART, select this option.
+
config DEBUG_CLPS711X_UART1
bool "Kernel low-level debugging messages via UART1"
depends on ARCH_CLPS711X
Say Y here if you want kernel low-level debugging support
on Rockchip RK32xx based platforms.
+ config DEBUG_R7S72100_SCIF2
+ bool "Kernel low-level debugging messages via SCIF2 on R7S72100"
+ depends on ARCH_R7S72100
+ help
+ Say Y here if you want kernel low-level debugging support
+ via SCIF2 on Renesas RZ/A1H (R7S72100).
+
+ config DEBUG_RCAR_GEN1_SCIF0
+ bool "Kernel low-level debugging messages via SCIF0 on R8A7778"
+ depends on ARCH_R8A7778
+ help
+ Say Y here if you want kernel low-level debugging support
+ via SCIF0 on Renesas R-Car M1A (R8A7778).
+
+ config DEBUG_RCAR_GEN1_SCIF2
+ bool "Kernel low-level debugging messages via SCIF2 on R8A7779"
+ depends on ARCH_R8A7779
+ help
+ Say Y here if you want kernel low-level debugging support
+ via SCIF2 on Renesas R-Car H1 (R8A7779).
+
+ config DEBUG_RCAR_GEN2_SCIF0
+ bool "Kernel low-level debugging messages via SCIF0 on R8A7790/R8A7791/R8A7793)"
+ depends on ARCH_R8A7790 || ARCH_R8A7791 || ARCH_R8A7793
+ help
+ Say Y here if you want kernel low-level debugging support
+ via SCIF0 on Renesas R-Car H2 (R8A7790), M2-W (R8A7791), or
+ M2-N (R8A7793).
+
+ config DEBUG_RCAR_GEN2_SCIF2
+ bool "Kernel low-level debugging messages via SCIF2 on R8A7794"
+ depends on ARCH_R8A7794
+ help
+ Say Y here if you want kernel low-level debugging support
+ via SCIF2 on Renesas R-Car E2 (R8A7794).
+
+ config DEBUG_RMOBILE_SCIFA0
+ bool "Kernel low-level debugging messages via SCIFA0 on R8A73A4/SH7372"
+ depends on ARCH_R8A73A4 || ARCH_SH7372
+ help
+ Say Y here if you want kernel low-level debugging support
+ via SCIFA0 on Renesas R-Mobile APE6 (R8A73A4) or SH-Mobile
+ AP4 (SH7372).
+
+ config DEBUG_RMOBILE_SCIFA1
+ bool "Kernel low-level debugging messages via SCIFA1 on R8A7740"
+ depends on ARCH_R8A7740
+ help
+ Say Y here if you want kernel low-level debugging support
+ via SCIFA1 on Renesas R-Mobile A1 (R8A7740).
+
+ config DEBUG_RMOBILE_SCIFA4
+ bool "Kernel low-level debugging messages via SCIFA4 on SH73A0"
+ depends on ARCH_SH73A0
+ help
+ Say Y here if you want kernel low-level debugging support
+ via SCIFA4 on Renesas SH-Mobile AG5 (SH73A0).
+
config DEBUG_S3C_UART0
depends on PLAT_SAMSUNG
select DEBUG_EXYNOS_UART if ARCH_EXYNOS
their output to UART 2. The port must have been initialised
by the boot-loader before use.
+ config DEBUG_SA1100
+ depends on ARCH_SA1100
+ bool "Use SA1100 UARTs for low-level debug"
+ help
+ Say Y here if you want kernel low-level debugging support
+ on SA-11x0 UART ports. The kernel will check for the first
+ enabled UART in a sequence 3-1-2.
+
config DEBUG_SOCFPGA_UART
depends on ARCH_SOCFPGA
bool "Use SOCFPGA UART for low-level debug"
Say Y here if you want kernel low-level debugging support
on SOCFPGA based platforms.
+ config DEBUG_SUN9I_UART0
+ bool "Kernel low-level debugging messages via sun9i UART0"
+ depends on MACH_SUN9I
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Allwinner A80 based platforms on the UART0.
+
config DEBUG_SUNXI_UART0
bool "Kernel low-level debugging messages via sunXi UART0"
depends on ARCH_SUNXI
Say Y here if you want kernel low-level debugging support
for Mediatek mt6589 based platforms on UART0.
+ config DEBUG_MT8127_UART0
+ bool "Mediatek mt8127 UART0"
+ depends on ARCH_MEDIATEK
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ for Mediatek mt8127 based platforms on UART0.
+
+ config DEBUG_MT8135_UART3
+ bool "Mediatek mt8135 UART3"
+ depends on ARCH_MEDIATEK
+ select DEBUG_UART_8250
+ help
+ Say Y here if you want kernel low-level debugging support
+ for Mediatek mt8135 based platforms on UART3.
+
config DEBUG_VEXPRESS_UART0_DETECT
bool "Autodetect UART0 on Versatile Express Cortex-A core tiles"
depends on ARCH_VEXPRESS && CPU_CP15_MMU
config DEBUG_LL_INCLUDE
string
+ default "debug/sa1100.S" if DEBUG_SA1100
default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
+ default "debug/asm9260.S" if DEBUG_ASM9260_UART
default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2
default "debug/meson.S" if DEBUG_MESON_UARTAO
default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X
DEBUG_IMX6SX_UART
default "debug/msm.S" if DEBUG_MSM_UART || DEBUG_QCOM_UARTDM
default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART
+ default "debug/renesas-scif.S" if DEBUG_R7S72100_SCIF2
+ default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF0
+ default "debug/renesas-scif.S" if DEBUG_RCAR_GEN1_SCIF2
+ default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF0
+ default "debug/renesas-scif.S" if DEBUG_RCAR_GEN2_SCIF2
+ default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA0
+ default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA1
+ default "debug/renesas-scif.S" if DEBUG_RMOBILE_SCIFA4
default "debug/s3c24xx.S" if DEBUG_S3C24XX_UART
default "debug/s5pv210.S" if DEBUG_S5PV210_UART
default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1
default 0x02530c00 if DEBUG_KEYSTONE_UART0
default 0x02531000 if DEBUG_KEYSTONE_UART1
default 0x03010fe0 if ARCH_RPC
+ default 0x07000000 if DEBUG_SUN9I_UART0
default 0x10009000 if DEBUG_REALVIEW_STD_PORT || \
DEBUG_VEXPRESS_UART0_CA9
default 0x1010c000 if DEBUG_REALVIEW_PB1176_PORT
default 0x10126000 if DEBUG_RK3X_UART1
default 0x101f1000 if ARCH_VERSATILE
default 0x101fb000 if DEBUG_NOMADIK_UART
+ default 0x11002000 if DEBUG_MT8127_UART0
default 0x11006000 if DEBUG_MT6589_UART0
+ default 0x11009000 if DEBUG_MT8135_UART3
default 0x16000000 if ARCH_INTEGRATOR
default 0x18000300 if DEBUG_BCM_5301X
default 0x1c090000 if DEBUG_VEXPRESS_UART0_RS1
default 0x78000000 if DEBUG_CNS3XXX
default 0x7c0003f8 if FOOTBRIDGE
default 0x78000000 if DEBUG_CNS3XXX
+ default 0x80010000 if DEBUG_ASM9260_UART
default 0x80070000 if DEBUG_IMX23_UART
default 0x80074000 if DEBUG_IMX28_UART
default 0x80230000 if DEBUG_PICOXCELL_UART
default 0xd4018000 if DEBUG_MMP_UART3
default 0xe0000000 if ARCH_SPEAR13XX
default 0xe4007000 if DEBUG_HIP04_UART
+ default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0
+ default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1
+ default 0xe6c80000 if DEBUG_RMOBILE_SCIFA4
+ default 0xe6e58000 if DEBUG_RCAR_GEN2_SCIF2
+ default 0xe6e60000 if DEBUG_RCAR_GEN2_SCIF0
+ default 0xe8008000 if DEBUG_R7S72100_SCIF2
default 0xf0000be0 if ARCH_EBSA110
+ default 0xf040ab00 if DEBUG_BRCMSTB_UART
default 0xf1012000 if DEBUG_MVEBU_UART_ALTERNATE
default 0xf1012000 if ARCH_DOVE || ARCH_MV78XX0 || \
ARCH_ORION5X
default 0xff690000 if DEBUG_RK32_UART2
default 0xffc02000 if DEBUG_SOCFPGA_UART
default 0xffd82340 if ARCH_IOP13XX
+ default 0xffe40000 if DEBUG_RCAR_GEN1_SCIF0
+ default 0xffe42000 if DEBUG_RCAR_GEN1_SCIF2
default 0xfff36000 if DEBUG_HIGHBANK_UART
default 0xfffe8600 if DEBUG_UART_BCM63XX
default 0xfffff700 if ARCH_IOP33X
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_LL_UART_EFM32 || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
- DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
- DEBUG_UART_BCM63XX
+ DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_R7S72100_SCIF2 || \
+ DEBUG_RCAR_GEN1_SCIF0 || DEBUG_RCAR_GEN1_SCIF2 || \
+ DEBUG_RCAR_GEN2_SCIF0 || DEBUG_RCAR_GEN2_SCIF2 || \
+ DEBUG_RMOBILE_SCIFA0 || DEBUG_RMOBILE_SCIFA1 || \
+ DEBUG_RMOBILE_SCIFA4 || DEBUG_S3C24XX_UART || \
+ DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART
config DEBUG_UART_VIRT
hex "Virtual base address of debug UART"
default 0xe0010fe0 if ARCH_RPC
default 0xe1000000 if DEBUG_MSM_UART
default 0xf0000be0 if ARCH_EBSA110
+ default 0xf0010000 if DEBUG_ASM9260_UART
default 0xf01fb000 if DEBUG_NOMADIK_UART
default 0xf0201000 if DEBUG_BCM2835
default 0xf1000300 if DEBUG_BCM_5301X
+ default 0xf1002000 if DEBUG_MT8127_UART0
default 0xf1006000 if DEBUG_MT6589_UART0
+ default 0xf1009000 if DEBUG_MT8135_UART3
default 0xf11f1000 if ARCH_VERSATILE
default 0xf1600000 if ARCH_INTEGRATOR
default 0xf1c28000 if DEBUG_SUNXI_UART0
default 0xf1c28400 if DEBUG_SUNXI_UART1
default 0xf1f02800 if DEBUG_SUNXI_R_UART
- default 0xf2100000 if DEBUG_PXA_UART1
+ default 0xf6200000 if DEBUG_PXA_UART1
default 0xf4090000 if ARCH_LPC32XX
default 0xf4200000 if ARCH_GEMINI
+ default 0xf7000000 if DEBUG_SUN9I_UART0
default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \
DEBUG_S3C2410_UART0)
default 0xf7004000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART1 || \
default 0xfb002000 if DEBUG_CNS3XXX
default 0xfb009000 if DEBUG_REALVIEW_STD_PORT
default 0xfb10c000 if DEBUG_REALVIEW_PB1176_PORT
+ default 0xfc40ab00 if DEBUG_BRCMSTB_UART
default 0xfcfe8600 if DEBUG_UART_BCM63XX
default 0xfd000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
default 0xfd000000 if ARCH_SPEAR13XX
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART || \
- DEBUG_UART_BCM63XX
+ DEBUG_UART_BCM63XX || DEBUG_ASM9260_UART
config DEBUG_UART_8250_SHIFT
int "Register offset shift for the 8250 debug UART"
depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
- default 0 if FOOTBRIDGE || ARCH_IOP32X
+ default 0 if FOOTBRIDGE || ARCH_IOP32X || DEBUG_BCM_5301X
default 2
config DEBUG_UART_8250_WORD
ARCH_KEYSTONE || \
DEBUG_DAVINCI_DMx_UART0 || DEBUG_DAVINCI_DA8XX_UART1 || \
DEBUG_DAVINCI_DA8XX_UART2 || \
- DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2
+ DEBUG_BCM_KONA_UART || DEBUG_RK32_UART2 || \
+ DEBUG_BRCMSTB_UART
config DEBUG_UART_8250_FLOW_CONTROL
bool "Enable flow control for 8250 UART"
$(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $(boot)/dts/$@
PHONY += dtbs dtbs_install
-dtbs dtbs_install: prepare scripts
- $(Q)$(MAKE) $(build)=$(boot)/dts MACHINE=$(MACHINE) $@
+
+dtbs: prepare scripts
+ $(Q)$(MAKE) $(build)=$(boot)/dts
+
+dtbs_install:
+ $(Q)$(MAKE) $(dtbinst)=$(boot)/dts
# We use MRPROPER_FILES and CLEAN_FILES now
archclean:
add sp, sp, r6
#endif
- tst r4, #1
- bleq cache_clean_flush
+ bl cache_clean_flush
adr r0, BSYM(restart)
add r0, r0, r6
b call_cache_fn
__armv4_mpu_cache_flush:
+ tst r4, #1
+ movne pc, lr
mov r2, #1
mov r3, #0
mcr p15, 0, ip, c7, c6, 0 @ invalidate D cache
mov pc, lr
__fa526_cache_flush:
+ tst r4, #1
+ movne pc, lr
mov r1, #0
mcr p15, 0, r1, c7, c14, 0 @ clean and invalidate D cache
mcr p15, 0, r1, c7, c5, 0 @ flush I cache
__armv6_mmu_cache_flush:
mov r1, #0
- mcr p15, 0, r1, c7, c14, 0 @ clean+invalidate D
+ tst r4, #1
+ mcreq p15, 0, r1, c7, c14, 0 @ clean+invalidate D
mcr p15, 0, r1, c7, c5, 0 @ invalidate I+BTB
- mcr p15, 0, r1, c7, c15, 0 @ clean+invalidate unified
+ mcreq p15, 0, r1, c7, c15, 0 @ clean+invalidate unified
mcr p15, 0, r1, c7, c10, 4 @ drain WB
mov pc, lr
__armv7_mmu_cache_flush:
+ tst r4, #1
+ bne iflush
mrc p15, 0, r10, c0, c1, 5 @ read ID_MMFR1
tst r10, #0xf << 16 @ hierarchical cache (ARMv7)
mov r10, #0
mov pc, lr
__armv5tej_mmu_cache_flush:
+ tst r4, #1
+ movne pc, lr
1: mrc p15, 0, r15, c7, c14, 3 @ test,clean,invalidate D cache
bne 1b
mcr p15, 0, r0, c7, c5, 0 @ flush I cache
mov pc, lr
__armv4_mmu_cache_flush:
+ tst r4, #1
+ movne pc, lr
mov r2, #64*1024 @ default: 32K dcache size (*2)
mov r11, #32 @ default: 32 byte line size
mrc p15, 0, r3, c0, c0, 1 @ read cache type
__armv3_mmu_cache_flush:
__armv3_mpu_cache_flush:
+ tst r4, #1
+ movne pc, lr
mov r1, #0
mcr p15, 0, r1, c7, c0, 0 @ invalidate whole cache v3
mov pc, lr
dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb
dtb-$(CONFIG_ARCH_AXXIA) += axm5516-amarillo.dtb
dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb
-dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
+dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b-plus.dtb
+dtb-$(CONFIG_ARCH_BCM_5301X) += \
+ bcm4708-buffalo-wzr-1750dhp.dtb \
+ bcm4708-netgear-r6250.dtb \
+ bcm4708-netgear-r6300-v2.dtb \
+ bcm47081-asus-rt-n18u.dtb \
+ bcm47081-buffalo-wzr-600dhp2.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += bcm963138dvt.dtb
+dtb-$(CONFIG_ARCH_BCM_CYGNUS) += bcm911360_entphn.dtb \
+ bcm911360k.dtb \
+ bcm958300k.dtb
dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm28155-ap.dtb \
bcm21664-garnet.dtb
dtb-$(CONFIG_ARCH_BERLIN) += \
dtb-$(CONFIG_ARCH_DAVINCI) += da850-enbw-cmc.dtb \
da850-evm.dtb
dtb-$(CONFIG_ARCH_EFM32) += efm32gg-dk3750.dtb
-dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \
+dtb-$(CONFIG_ARCH_EXYNOS) += exynos3250-monk.dtb \
+ exynos3250-rinato.dtb \
+ exynos4210-origen.dtb \
exynos4210-smdkv310.dtb \
exynos4210-trats.dtb \
exynos4210-universal_c210.dtb \
exynos5250-arndale.dtb \
exynos5250-smdk5250.dtb \
exynos5250-snow.dtb \
+ exynos5250-spring.dtb \
exynos5260-xyref5260.dtb \
exynos5410-smdk5410.dtb \
exynos5420-arndale-octa.dtb \
kirkwood-d2net.dtb \
kirkwood-db-88f6281.dtb \
kirkwood-db-88f6282.dtb \
+ kirkwood-dir665.dtb \
kirkwood-dns320.dtb \
kirkwood-dns325.dtb \
kirkwood-dockstar.dtb \
imx6q-sabrelite.dtb \
imx6q-sabresd.dtb \
imx6q-sbc6x.dtb \
+ imx6q-tbs2910.dtb \
imx6q-udoo.dtb \
imx6q-wandboard.dtb \
imx6q-wandboard-revb1.dtb \
imx6q-tx6q-1110.dtb \
imx6sl-evk.dtb \
imx6sx-sdb.dtb \
+ ls1021a-qds.dtb \
+ ls1021a-twr.dtb \
+ vf500-colibri-eval-v3.dtb \
vf610-colibri-eval-v3.dtb \
vf610-cosmic.dtb \
vf610-twr.dtb
imx28-m28evk.dtb \
imx28-sps1.dtb \
imx28-tx28.dtb
-dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb
+dtb-$(CONFIG_ARCH_NOMADIK) += ste-nomadik-s8815.dtb \
+ ste-nomadik-nhk15.dtb
dtb-$(CONFIG_ARCH_NSPIRE) += nspire-cx.dtb \
nspire-tp.dtb \
nspire-clp.dtb
omap3-ha.dtb \
omap3-ha-lcd.dtb \
omap3-igep0020.dtb \
+ omap3-igep0020-rev-f.dtb \
omap3-igep0030.dtb \
+ omap3-igep0030-rev-g.dtb \
omap3-ldp.dtb \
omap3-lilly-dbb056.dtb \
omap3-n900.dtb \
am335x-evm.dtb \
am335x-evmsk.dtb \
am335x-nano.dtb \
- am335x-pepper.dtb
+ am335x-pepper.dtb \
+ am335x-lxm.dtb
dtb-$(CONFIG_ARCH_OMAP4) += omap4-duovero-parlor.dtb \
omap4-panda.dtb \
omap4-panda-a4.dtb \
omap5-sbc-t54.dtb \
omap5-uevm.dtb
dtb-$(CONFIG_SOC_DRA7XX) += dra7-evm.dtb \
+ am57xx-beagle-x15.dtb \
dra72-evm.dtb
dtb-$(CONFIG_ARCH_ORION5X) += orion5x-lacie-d2-network.dtb \
orion5x-lacie-ethernet-disk-mini-v2.dtb \
qcom-msm8660-surf.dtb \
qcom-msm8960-cdp.dtb \
qcom-msm8974-sony-xperia-honami.dtb
+dtb-$(CONFIG_ARCH_REALVIEW) += arm-realview-pb1176.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
rk3066a-bqcurie2.dtb \
+ rk3066a-marsboard.dtb \
rk3188-radxarock.dtb \
rk3288-evb-act8846.dtb \
rk3288-evb-rk808.dtb
s5pv210-smdkc110.dtb \
s5pv210-smdkv210.dtb \
s5pv210-torbreck.dtb
-dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += r7s72100-genmai.dtb \
+dtb-$(CONFIG_ARCH_SHMOBILE_LEGACY) += \
+ r8a73a4-ape6evm.dtb \
+ r8a73a4-ape6evm-reference.dtb \
r8a7740-armadillo800eva.dtb \
r8a7778-bockw.dtb \
r8a7778-bockw-reference.dtb \
r8a7779-marzen.dtb \
- r8a7791-koelsch.dtb \
r8a7790-lager.dtb \
+ sh7372-mackerel.dtb \
sh73a0-kzm9g.dtb \
- sh73a0-kzm9g-reference.dtb \
- r8a73a4-ape6evm.dtb \
- r8a73a4-ape6evm-reference.dtb \
- sh7372-mackerel.dtb
+ sh73a0-kzm9g-reference.dtb
dtb-$(CONFIG_ARCH_SHMOBILE_MULTI) += emev2-kzm9d.dtb \
r7s72100-genmai.dtb \
r8a7740-armadillo800eva.dtb \
+ r8a7779-marzen.dtb \
+ r8a7790-lager.dtb \
r8a7791-henninger.dtb \
r8a7791-koelsch.dtb \
- r8a7790-lager.dtb \
- r8a7779-marzen.dtb \
r8a7794-alt.dtb
dtb-$(CONFIG_ARCH_SOCFPGA) += socfpga_arria5_socdk.dtb \
+ socfpga_arria10_socdk.dtb \
socfpga_cyclone5_socdk.dtb \
socfpga_cyclone5_sockit.dtb \
socfpga_cyclone5_socrates.dtb \
spear320-hmi.dtb
dtb-$(CONFIG_ARCH_SPEAR6XX)+= spear600-evb.dtb
dtb-$(CONFIG_ARCH_STI)+= stih407-b2120.dtb \
+ stih410-b2120.dtb \
stih415-b2000.dtb \
stih415-b2020.dtb \
stih416-b2000.dtb \
sun6i-a31-hummingbird.dtb \
sun6i-a31-m9.dtb
dtb-$(CONFIG_MACH_SUN7I) += \
+ sun7i-a20-bananapi.dtb \
sun7i-a20-cubieboard2.dtb \
sun7i-a20-cubietruck.dtb \
sun7i-a20-hummingbird.dtb \
sun7i-a20-i12-tvbox.dtb \
+ sun7i-a20-m3.dtb \
sun7i-a20-olinuxino-lime.dtb \
+ sun7i-a20-olinuxino-lime2.dtb \
sun7i-a20-olinuxino-micro.dtb \
sun7i-a20-pcduino3.dtb
dtb-$(CONFIG_MACH_SUN8I) += \
sun8i-a23-ippo-q8h-v5.dtb
+dtb-$(CONFIG_MACH_SUN9I) += \
+ sun9i-a80-optimus.dtb
dtb-$(CONFIG_ARCH_TEGRA) += tegra20-harmony.dtb \
tegra20-iris-512.dtb \
tegra20-medcom-wide.dtb \
zynq-parallella.dtb \
zynq-zc702.dtb \
zynq-zc706.dtb \
- zynq-zed.dtb
+ zynq-zed.dtb \
+ zynq-zybo.dtb
dtb-$(CONFIG_MACH_ARMADA_370) += \
armada-370-db.dtb \
armada-370-mirabox.dtb \
armada-370-netgear-rn102.dtb \
armada-370-netgear-rn104.dtb \
- armada-370-rd.dtb
+ armada-370-rd.dtb \
+ armada-370-synology-ds213j.dtb
dtb-$(CONFIG_MACH_ARMADA_375) += \
armada-375-db.dtb
dtb-$(CONFIG_MACH_ARMADA_38X) += \
armada-xp-lenovo-ix4-300d.dtb \
armada-xp-matrix.dtb \
armada-xp-netgear-rn2120.dtb \
- armada-xp-openblocks-ax3-4.dtb
+ armada-xp-openblocks-ax3-4.dtb \
+ armada-xp-synology-ds414.dtb
dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \
dove-cubox.dtb \
dove-cubox-es.dtb \
dove-d2plug.dtb \
dove-d3plug.dtb \
dove-dove-db.dtb
-dtb-$(CONFIG_ARCH_MEDIATEK) += mt6589-aquaris5.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt6589-aquaris5.dtb \
+ mt6592-evb.dtb \
+ mt8127-moose.dtb \
+ mt8135-evbp1.dtb
-targets += dtbs dtbs_install
-targets += $(dtb-y)
endif
-# *.dtb used to be generated in the directory above. Clean out the
-# old build results so people don't accidentally use them.
-dtbs: $(addprefix $(obj)/, $(dtb-y))
- $(Q)rm -f $(obj)/../*.dtb
-
-clean-files := *.dtb
-
-dtbs_install: $(addsuffix _dtbinst_, $(dtb-y))
+always := $(dtb-y)
+clean-files := *.dtb
0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
>;
};
+
+ dcan1_pins_default: dcan1_pins_default {
+ pinctrl-single,pins = <
+ 0x168 (PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */
+ 0x16c (PIN_INPUT_PULLDOWN | MUX_MODE2) /* uart0_rtsn.d_can1_rx */
+ >;
+ };
};
&uart0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&nandflash_pins_s0>;
- ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
+ ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
- reg = <0 0 0>; /* CS0, offset 0 */
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
ti,nand-ecc-opt = "bch8";
ti,elm-id = <&elm>;
nand-bus-width = <8>;
reg = <0x00060000 0x00020000>;
};
partition@4 {
- label = "NAND.u-boot-spl";
+ label = "NAND.u-boot-spl-os";
reg = <0x00080000 0x00040000>;
};
partition@5 {
&aes {
status = "okay";
};
+
+&dcan1 {
+ status = "disabled"; /* Enable only if Profile 1 is selected */
+ pinctrl-names = "default";
+ pinctrl-0 = <&dcan1_pins_default>;
+};
pinctrl-names = "default";
pinctrl-0 = <&nandflash_pins>;
- ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
+ ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
- reg = <0 0 0>; /* CS0, offset 0 */
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <8>;
ti,nand-ecc-opt = "bch8";
gpmc,device-width = <1>;
--- /dev/null
+/*
+ * Copyright (C) 2014 NovaTech LLC - http://www.novatechweb.com
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "am33xx.dtsi"
+
+/ {
+ model = "NovaTech OrionLXm";
+ compatible = "novatech,am335x-lxm", "ti,am33xx";
+
+ cpus {
+ cpu@0 {
+ cpu0-supply = <&vdd1_reg>;
+ };
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>; /* 512 MB */
+ };
+
+ /* Power supply provides a fixed 5V @2A */
+ vbat: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vbat";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+
+ /* Power supply provides a fixed 3.3V @3A */
+ vmmcsd_fixed: fixedregulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmcsd_fixed";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+};
+
+&am33xx_pinmux {
+ mmc1_pins: pinmux_mmc1_pins {
+ pinctrl-single,pins = <
+ 0xf0 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat3 */
+ 0xf4 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat2 */
+ 0xf8 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat1 */
+ 0xfc (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_dat0 */
+ 0x100 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_clk */
+ 0x104 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc0_cmd */
+ >;
+ };
+
+ i2c0_pins: pinmux_i2c0_pins {
+ pinctrl-single,pins = <
+ 0x188 (PIN_INPUT | MUX_MODE0) /* i2c0_sda.i2c0_sda */
+ 0x18c (PIN_INPUT | MUX_MODE0) /* i2c0_scl.i2c0_scl */
+ >;
+ };
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */
+ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_crs_dv */
+ 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rxer */
+ 0x114 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_txen */
+ 0x124 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td1 */
+ 0x128 (PIN_OUTPUT_PULLDOWN | MUX_MODE1) /* rmii1_td0 */
+ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd1 */
+ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii1_rd0 */
+ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE0) /* rmii1_refclk */
+
+ /* Slave 2 */
+ 0x40 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_txen */
+ 0x50 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td1 */
+ 0x54 (PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* rmii2_td0 */
+ 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd1 */
+ 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rd0 */
+ 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_crs_dv */
+ 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* rmii2_rxer */
+ 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */
+ 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE1) /* rmii2_refclk */
+ >;
+ };
+
+ cpsw_sleep: cpsw_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 reset value */
+ 0x64 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_int */
+ 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_crs_dv */
+ 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rxer */
+ 0x114 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_txen */
+ 0x124 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td1 */
+ 0x128 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_td0 */
+ 0x13c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd1 */
+ 0x140 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_rd0 */
+ 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii1_refclk */
+
+ /* Slave 2 reset value*/
+ 0x40 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_txen */
+ 0x50 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td1 */
+ 0x54 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_td0 */
+ 0x68 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd1 */
+ 0x6c (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rd0 */
+ 0x70 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_crs_dv */
+ 0x74 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_rxer */
+ 0x78 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_int */
+ 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) /* rmii2_refclk */
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* MDIO */
+ 0x148 (PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
+ 0x14c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+
+ davinci_mdio_sleep: davinci_mdio_sleep {
+ pinctrl-single,pins = <
+ /* MDIO reset value */
+ 0x148 (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ 0x14c (PIN_INPUT_PULLDOWN | MUX_MODE7)
+ >;
+ };
+
+ emmc_pins: pinmux_emmc_pins {
+ pinctrl-single,pins = <
+ 0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
+ 0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
+ 0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
+ 0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
+ 0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
+ 0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
+ 0x10 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
+ 0x14 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
+ 0x18 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
+ 0x1c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
+ >;
+ };
+
+ uart0_pins: pinmux_uart0_pins {
+ pinctrl-single,pins = <
+ 0x170 (PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
+ 0x174 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
+ >;
+ };
+};
+
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins>;
+
+ status = "okay";
+ clock-frequency = <400000>;
+
+ serial_config1: serial_config1@20 {
+ compatible = "nxp,pca9539";
+ reg = <0x20>;
+ };
+
+ serial_config2: serial_config2@21 {
+ compatible = "nxp,pca9539";
+ reg = <0x21>;
+ };
+
+ tps: tps@2d {
+ compatible = "ti,tps65910";
+ reg = <0x2d>;
+ };
+};
+
+/include/ "tps65910.dtsi"
+
+&tps {
+ vcc1-supply = <&vbat>;
+ vcc2-supply = <&vbat>;
+ vcc3-supply = <&vbat>;
+ vcc4-supply = <&vbat>;
+ vcc5-supply = <&vbat>;
+ vcc6-supply = <&vbat>;
+ vcc7-supply = <&vbat>;
+ vccio-supply = <&vbat>;
+
+ regulators {
+ /* vrtc - unused */
+
+ vio_reg: regulator@1 {
+ regulator-name = "vio_1v5,ddr";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd1_reg: regulator@2 {
+ regulator-name = "vdd1,mpu";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vdd2_reg: regulator@3 {
+ regulator-name = "vdd2_1v1,core";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* vdd3 - unused */
+
+ /* vdig1 - unused */
+
+ vdig2_reg: regulator@6 {
+ regulator-name = "vdig2_1v8,vdds_pll";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* vpll - unused */
+
+ vdac_reg: regulator@8 {
+ regulator-name = "vdac_1v8,vdds";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vaux1_reg: regulator@9 {
+ regulator-name = "vaux1_1v8,usb";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vaux2_reg: regulator@10 {
+ regulator-name = "vaux2_3v3,io";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vaux33_reg: regulator@11 {
+ regulator-name = "vaux33_3v3,usb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vmmc_reg: regulator@12 {
+ regulator-name = "vmmc_3v3,io";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+};
+
+&sham {
+ status = "okay";
+};
+
+&aes {
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins>;
+
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+};
+
+&usb_ctrl_mod {
+ status = "okay";
+};
+
+&usb0_phy {
+ status = "okay";
+};
+
+&usb1_phy {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&usb1 {
+ status = "okay";
+ dr_mode = "host";
+};
+
+&cppi41dma {
+ status = "okay";
+};
+
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <5>;
+ phy-mode = "rmii";
+ dual_emac_res_vlan = <2>;
+};
+
+&cpsw_emac1 {
+ phy_id = <&davinci_mdio>, <4>;
+ phy-mode = "rmii";
+ dual_emac_res_vlan = <3>;
+};
+
+&mac {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ dual_emac = <1>;
+ status = "okay";
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+ status = "okay";
+};
+
+&mmc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins>;
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_pins>;
+ vmmc-supply = <&vmmcsd_fixed>;
+ bus-width = <8>;
+ ti,non-removable;
+ status = "okay";
+};
+
};
};
+ am33xx_control_module: control_module@4a002000 {
+ compatible = "syscon";
+ reg = <0x44e10000 0x7fc>;
+ };
+
am33xx_pinmux: pinmux@44e10800 {
compatible = "pinctrl-single";
reg = <0x44e10800 0x0238>;
reg = <0x44e09000 0x2000>;
interrupts = <72>;
status = "disabled";
+ dmas = <&edma 26>, <&edma 27>;
+ dma-names = "tx", "rx";
};
uart1: serial@48022000 {
reg = <0x48022000 0x2000>;
interrupts = <73>;
status = "disabled";
+ dmas = <&edma 28>, <&edma 29>;
+ dma-names = "tx", "rx";
};
uart2: serial@48024000 {
reg = <0x48024000 0x2000>;
interrupts = <74>;
status = "disabled";
+ dmas = <&edma 30>, <&edma 31>;
+ dma-names = "tx", "rx";
};
uart3: serial@481a6000 {
interrupts = <91>;
};
- dcan0: d_can@481cc000 {
- compatible = "bosch,d_can";
+ dcan0: can@481cc000 {
+ compatible = "ti,am3352-d_can";
ti,hwmods = "d_can0";
- reg = <0x481cc000 0x2000
- 0x44e10644 0x4>;
+ reg = <0x481cc000 0x2000>;
+ clocks = <&dcan0_fck>;
+ clock-names = "fck";
+ syscon-raminit = <&am33xx_control_module 0x644 0>;
interrupts = <52>;
status = "disabled";
};
- dcan1: d_can@481d0000 {
- compatible = "bosch,d_can";
+ dcan1: can@481d0000 {
+ compatible = "ti,am3352-d_can";
ti,hwmods = "d_can1";
- reg = <0x481d0000 0x2000
- 0x44e10644 0x4>;
+ reg = <0x481d0000 0x2000>;
+ clocks = <&dcan1_fck>;
+ clock-names = "fck";
+ syscon-raminit = <&am33xx_control_module 0x644 1>;
interrupts = <55>;
status = "disabled";
};
reg = <0x480C8000 0x200>;
interrupts = <77>;
ti,hwmods = "mailbox";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <8>;
mbox_wkupm3: wkup_m3 {
cache-level = <2>;
};
+ am43xx_control_module: control_module@4a002000 {
+ compatible = "syscon";
+ reg = <0x44e10000 0x7f4>;
+ };
+
am43xx_pinmux: pinmux@44e10800 {
compatible = "ti,am437-padconf", "pinctrl-single";
reg = <0x44e10800 0x31c>;
reg = <0x480C8000 0x200>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <8>;
mbox_wkupm3: wkup_m3 {
};
};
+ tscadc: tscadc@44e0d000 {
+ compatible = "ti,am3359-tscadc";
+ reg = <0x44e0d000 0x1000>;
+ ti,hwmods = "adc_tsc";
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&adc_tsc_fck>;
+ clock-names = "fck";
+ status = "disabled";
+
+ tsc {
+ compatible = "ti,am3359-tsc";
+ };
+
+ adc {
+ #io-channel-cells = <1>;
+ compatible = "ti,am3359-adc";
+ };
+
+ };
+
sham: sham@53100000 {
compatible = "ti,omap5-sham";
ti,hwmods = "sham";
compatible = "mmio-sram";
reg = <0x40300000 0x40000>; /* 256k */
};
+
+ dcan0: can@481cc000 {
+ compatible = "ti,am4372-d_can", "ti,am3352-d_can";
+ ti,hwmods = "d_can0";
+ clocks = <&dcan0_fck>;
+ clock-names = "fck";
+ reg = <0x481cc000 0x2000>;
+ syscon-raminit = <&am43xx_control_module 0x644 0>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ dcan1: can@481d0000 {
+ compatible = "ti,am4372-d_can", "ti,am3352-d_can";
+ ti,hwmods = "d_can1";
+ clocks = <&dcan1_fck>;
+ clock-names = "fck";
+ reg = <0x481d0000 0x2000>;
+ syscon-raminit = <&am43xx_control_module 0x644 1>;
+ interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
};
};
0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7)
>;
};
+
+ dcan0_default: dcan0_default_pins {
+ pinctrl-single,pins = <
+ 0x178 (PIN_OUTPUT | MUX_MODE2) /* uart1_ctsn.d_can0_tx */
+ 0x17c (PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_rtsn.d_can0_rx */
+ >;
+ };
+
+ dcan1_default: dcan1_default_pins {
+ pinctrl-single,pins = <
+ 0x180 (PIN_OUTPUT | MUX_MODE2) /* uart1_rxd.d_can1_tx */
+ 0x184 (PIN_INPUT_PULLUP | MUX_MODE2) /* uart1_txd.d_can1_rx */
+ >;
+ };
};
&i2c0 {
dcdc3: regulator-dcdc3 {
compatible = "ti,tps65218-dcdc3";
regulator-name = "vdcdc3";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
status = "okay";
};
+&tscadc {
+ status = "okay";
+
+ adc {
+ ti,adc-channels = <0 1 2 3 4 5 6 7>;
+ };
+};
+
&ecap0 {
status = "okay";
pinctrl-names = "default";
};
};
};
+
+&dcan0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dcan0_default>;
+ status = "okay";
+};
+
+&dcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&dcan1_default>;
+ status = "okay";
+};
dcdc3: regulator-dcdc3 {
compatible = "ti,tps65218-dcdc3";
regulator-name = "vdds_ddr";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
dcdc3: regulator-dcdc3 {
compatible = "ti,tps65218-dcdc3";
regulator-name = "vdcdc3";
- regulator-min-microvolt = <1350000>;
- regulator-max-microvolt = <1350000>;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
regulator-boot-on;
regulator-always-on;
};
status = "okay"; /* Disable QSPI when enabling GPMC (NAND) */
pinctrl-names = "default";
pinctrl-0 = <&nand_flash_x8>;
- ranges = <0 0 0x08000000 0x10000000>; /* CS0: NAND */
+ ranges = <0 0 0x08000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
- reg = <0 0 0>; /* CS0, offset 0 */
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
ti,nand-ecc-opt = "bch16";
ti,elm-id = <&elm>;
nand-bus-width = <8>;
status = "okay";
};
+&tscadc {
+ status = "okay";
+
+ adc {
+ ti,adc-channels = <0 1 2 3 4 5 6 7>;
+ };
+};
+
&ecap0 {
status = "okay";
pinctrl-names = "default";
--- /dev/null
+/*
+ * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+
+#include "dra74x.dtsi"
+#include <dt-bindings/clk/ti-dra7-atl.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+ model = "TI AM5728 BeagleBoard-X15";
+ compatible = "ti,am572x-beagle-x15", "ti,am5728", "ti,dra742", "ti,dra74", "ti,dra7";
+
+ aliases {
+ rtc0 = &mcp_rtc;
+ rtc1 = &tps659038_rtc;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x80000000 0x80000000>;
+ };
+
+ vdd_3v3: fixedregulator-vdd_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_3v3";
+ vin-supply = <®en1>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vtt_fixed: fixedregulator-vtt {
+ /* TPS51200 */
+ compatible = "regulator-fixed";
+ regulator-name = "vtt_fixed";
+ vin-supply = <&smps3_reg>;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ enable-active-high;
+ gpio = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_pins_default>;
+
+ led@0 {
+ label = "beagle-x15:usr0";
+ gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ default-state = "off";
+ };
+
+ led@1 {
+ label = "beagle-x15:usr1";
+ gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+
+ led@2 {
+ label = "beagle-x15:usr2";
+ gpios = <&gpio7 14 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+
+ led@3 {
+ label = "beagle-x15:usr3";
+ gpios = <&gpio7 15 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "ide-disk";
+ default-state = "off";
+ };
+ };
+};
+
+&dra7_pmx_core {
+ leds_pins_default: leds_pins_default {
+ pinctrl-single,pins = <
+ 0x3a8 (PIN_OUTPUT | MUX_MODE14) /* spi1_d1.gpio7_8 */
+ 0x3ac (PIN_OUTPUT | MUX_MODE14) /* spi1_d0.gpio7_9 */
+ 0x3c0 (PIN_OUTPUT | MUX_MODE14) /* spi2_sclk.gpio7_14 */
+ 0x3c4 (PIN_OUTPUT | MUX_MODE14) /* spi2_d1.gpio7_15 */
+ >;
+ };
+
+ i2c1_pins_default: i2c1_pins_default {
+ pinctrl-single,pins = <
+ 0x400 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda.sda */
+ 0x404 (PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl.scl */
+ >;
+ };
+
+ i2c3_pins_default: i2c3_pins_default {
+ pinctrl-single,pins = <
+ 0x2a4 (PIN_INPUT| MUX_MODE10) /* mcasp1_aclkx.i2c3_sda */
+ 0x2a8 (PIN_INPUT| MUX_MODE10) /* mcasp1_fsx.i2c3_scl */
+ >;
+ };
+
+ uart3_pins_default: uart3_pins_default {
+ pinctrl-single,pins = <
+ 0x248 (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_rxd.rxd */
+ 0x24c (PIN_INPUT_SLEW | MUX_MODE0) /* uart3_txd.txd */
+ >;
+ };
+
+ mmc1_pins_default: mmc1_pins_default {
+ pinctrl-single,pins = <
+ 0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
+ 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc2_pins_default: mmc2_pins_default {
+ pinctrl-single,pins = <
+ 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ tps659038_pins_default: tps659038_pins_default {
+ pinctrl-single,pins = <
+ 0x418 (PIN_INPUT_PULLUP | MUX_MODE14) /* wakeup0.gpio1_0 */
+ >;
+ };
+
+ tmp102_pins_default: tmp102_pins_default {
+ pinctrl-single,pins = <
+ 0x3C8 (PIN_INPUT_PULLUP | MUX_MODE14) /* spi2_d0.gpio7_16 */
+ >;
+ };
+
+ mcp79410_pins_default: mcp79410_pins_default {
+ pinctrl-single,pins = <
+ 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
+ >;
+ };
+
+ usb1_pins: pinmux_usb1_pins {
+ pinctrl-single,pins = <
+ 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+ >;
+ };
+
+};
+
+&i2c1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_default>;
+ clock-frequency = <400000>;
+
+ tps659038: tps659038@58 {
+ compatible = "ti,tps659038";
+ reg = <0x58>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tps659038_pins_default>;
+
+ #interrupt-cells = <2>;
+ interrupt-controller;
+
+ ti,system-power-controller;
+
+ tps659038_pmic {
+ compatible = "ti,tps659038-pmic";
+
+ regulators {
+ smps12_reg: smps12 {
+ /* VDD_MPU */
+ regulator-name = "smps12";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps3_reg: smps3 {
+ /* VDD_DDR */
+ regulator-name = "smps3";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps45_reg: smps45 {
+ /* VDD_DSPEVE, VDD_IVA, VDD_GPU */
+ regulator-name = "smps45";
+ regulator-min-microvolt = < 850000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ smps6_reg: smps6 {
+ /* VDD_CORE */
+ regulator-name = "smps6";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1030000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* SMPS7 unused */
+
+ smps8_reg: smps8 {
+ /* VDD_1V8 */
+ regulator-name = "smps8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ /* SMPS9 unused */
+
+ ldo1_reg: ldo1 {
+ /* VDD_SD */
+ regulator-name = "ldo1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ ldo2_reg: ldo2 {
+ /* VDD_SHV5 */
+ regulator-name = "ldo2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo3_reg: ldo3 {
+ /* VDDA_1V8_PHY */
+ regulator-name = "ldo3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldo9_reg: ldo9 {
+ /* VDD_RTC */
+ regulator-name = "ldo9";
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldoln_reg: ldoln {
+ /* VDDA_1V8_PLL */
+ regulator-name = "ldoln";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ ldousb_reg: ldousb {
+ /* VDDA_3V_USB: VDDA_USBHS33 */
+ regulator-name = "ldousb";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ regen1: regen1 {
+ /* VDD_3V3_ON */
+ regulator-name = "regen1";
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+
+ tps659038_rtc: tps659038_rtc {
+ compatible = "ti,palmas-rtc";
+ interrupt-parent = <&tps659038>;
+ interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+ };
+
+ tps659038_pwr_button: tps659038_pwr_button {
+ compatible = "ti,palmas-pwrbutton";
+ interrupt-parent = <&tps659038>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ wakeup-source;
+ ti,palmas-long-press-seconds = <12>;
+ };
+ };
+
+ tmp102: tmp102@48 {
+ compatible = "ti,tmp102";
+ reg = <0x48>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tmp102_pins_default>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&i2c3 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins_default>;
+ clock-frequency = <400000>;
+
+ mcp_rtc: rtc@6f {
+ compatible = "microchip,mcp7941x";
+ reg = <0x6f>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_LOW>; /* IRQ_SYS_1N */
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcp79410_pins_default>;
+
+ vcc-supply = <&vdd_3v3>;
+ wakeup-source;
+ };
+};
+
+&gpio7 {
+ ti,no-reset-on-init;
+ ti,no-idle-on-init;
+};
+
+&cpu0 {
+ cpu0-supply = <&smps12_reg>;
+ voltage-tolerance = <1>;
+};
+
+&uart3 {
+ status = "okay";
+ interrupts-extended = <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <&dra7_pmx_core 0x248>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins_default>;
+};
+
+&mmc1 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_default>;
+
+ vmmc-supply = <&ldo1_reg>;
+ vmmc_aux-supply = <&vdd_3v3>;
+ pbias-supply = <&pbias_mmc_reg>;
+ bus-width = <4>;
+ cd-gpios = <&gpio6 27 0>; /* gpio 219 */
+};
+
+&mmc2 {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_default>;
+
+ vmmc-supply = <&vdd_3v3>;
+ bus-width = <8>;
+ ti,non-removable;
+ cap-mmc-dual-data-rate;
+};
+
+&sata {
+ status = "okay";
+};
+
+&usb2_phy1 {
+ phy-supply = <&ldousb_reg>;
+};
+
+&usb1 {
+ dr_mode = "host";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_pins>;
+};
--- /dev/null
+/*
+ * Copyright 2014 Linaro Ltd
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "skeleton.dtsi"
+
+/ {
+ model = "ARM RealView PB1176";
+ compatible = "arm,realview-pb1176";
+
+ chosen { };
+
+ aliases {
+ serial0 = &pb1176_serial0;
+ serial1 = &pb1176_serial1;
+ serial2 = &pb1176_serial2;
+ serial3 = &pb1176_serial3;
+ serial4 = &fpga_serial;
+ };
+
+ memory {
+ /* 128 MiB memory @ 0x0 */
+ reg = <0x00000000 0x08000000>;
+ };
+
+ /* The voltage to the MMC card is hardwired at 3.3V */
+ vmmc: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vmmc";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ };
+
+ xtal24mhz: xtal24mhz@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ };
+
+ timclk: timclk@1M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <24>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ mclk: mclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ kmiclk: kmiclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ sspclk: sspclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ uartclk: uartclk@24M {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clock-div = <1>;
+ clock-mult = <1>;
+ clocks = <&xtal24mhz>;
+ };
+
+ /* FIXME: this actually hangs off the PLL clocks */
+ pclk: pclk@0 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,realview-pb1176-soc", "simple-bus";
+ regmap = <&syscon>;
+ ranges;
+
+ syscon: syscon@10000000 {
+ compatible = "arm,realview-pb1176-syscon", "syscon";
+ reg = <0x10000000 0x1000>;
+
+ led@08.0 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x01>;
+ label = "versatile:0";
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+ led@08.1 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x02>;
+ label = "versatile:1";
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+ led@08.2 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x04>;
+ label = "versatile:2";
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+ led@08.3 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x08>;
+ label = "versatile:3";
+ default-state = "off";
+ };
+ led@08.4 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x10>;
+ label = "versatile:4";
+ default-state = "off";
+ };
+ led@08.5 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x20>;
+ label = "versatile:5";
+ default-state = "off";
+ };
+ led@08.6 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x40>;
+ label = "versatile:6";
+ default-state = "off";
+ };
+ led@08.7 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x80>;
+ label = "versatile:7";
+ default-state = "off";
+ };
+ };
+
+ /* Primary DevChip GIC synthesized with the CPU */
+ intc_dc1176: interrupt-controller@10120000 {
+ compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0x10121000 0x1000>,
+ <0x10120000 0x100>;
+ };
+
+ L2: l2-cache {
+ compatible = "arm,l220-cache";
+ reg = <0x10110000 0x1000>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 13 IRQ_TYPE_LEVEL_HIGH>;
+ cache-unified;
+ cache-level = <2>;
+ /*
+ * Override default cache size, sets and
+ * associativity as these may be erroneously set
+ * up by boot loader(s).
+ */
+ arm,override-auxreg;
+ cache-size = <131072>; // 128kB
+ cache-sets = <512>;
+ cache-line-size = <32>;
+ };
+
+ pmu {
+ compatible = "arm,arm1176-pmu";
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ timer01: timer@10104000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x10104000 0x1000>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>, <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&timclk>, <&timclk>, <&pclk>;
+ clock-names = "timer1", "timer2", "apb_pclk";
+ };
+
+ timer23: timer@10105000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x10105000 0x1000>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
+ arm,sp804-has-irq = <1>;
+ clocks = <&timclk>, <&timclk>, <&pclk>;
+ clock-names = "timer1", "timer2", "apb_pclk";
+ };
+
+ pb1176_rtc: rtc@10108000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x10108000 0x1000>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 14 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ pb1176_gpio0: gpio@1010a000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x1010a000 0x1000>;
+ gpio-controller;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 16 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ pb1176_ssp: ssp@1010b000 {
+ compatible = "arm,pl022", "arm,primecell";
+ reg = <0x1010b000 0x1000>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sspclk>, <&pclk>;
+ clock-names = "SSPCLK", "apb_pclk";
+ };
+
+ pb1176_serial0: serial@1010c000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1010c000 0x1000>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ pb1176_serial1: serial@1010d000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1010d000 0x1000>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ pb1176_serial2: serial@1010e000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1010e000 0x1000>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ pb1176_serial3: serial@1010f000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x1010f000 0x1000>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 21 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+ };
+
+ /* These peripherals are inside the FPGA rather than the DevChip */
+ fpga {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ fpga_mci: mmcsd@10005000 {
+ compatible = "arm,pl18x", "arm,primecell";
+ reg = <0x10005000 0x1000>;
+ interrupt-parent = <&intc_fpga1176>;
+ interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>,
+ <0 2 IRQ_TYPE_LEVEL_HIGH>;
+ /* Due to frequent FIFO overruns, use just 500 kHz */
+ max-frequency = <500000>;
+ bus-width = <4>;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ clocks = <&mclk>, <&pclk>;
+ clock-names = "mclk", "apb_pclk";
+ vmmc-supply = <&vmmc>;
+ cd-gpios = <&fpga_gpio1 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&fpga_gpio1 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ fpga_kmi0: kmi@10006000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x10006000 0x1000>;
+ interrupt-parent = <&intc_fpga1176>;
+ interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&kmiclk>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ fpga_kmi1: kmi@10007000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x10007000 0x1000>;
+ interrupt-parent = <&intc_fpga1176>;
+ interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&kmiclk>, <&pclk>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ fpga_charlcd: charlcd@10008000 {
+ compatible = "arm,versatile-lcd";
+ reg = <0x10008000 0x1000>;
+ interrupt-parent = <&intc_fpga1176>;
+ interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ fpga_serial: serial@10009000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x10009000 0x1000>;
+ interrupt-parent = <&intc_fpga1176>;
+ interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&uartclk>, <&pclk>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ /* This GIC on the board is cascaded off the DevChip GIC */
+ intc_fpga1176: interrupt-controller@10040000 {
+ compatible = "arm,arm1176jzf-devchip-gic", "arm,arm11mp-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <1>;
+ interrupt-controller;
+ reg = <0x10041000 0x1000>,
+ <0x10040000 0x100>;
+ interrupt-parent = <&intc_dc1176>;
+ interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ fpga_gpio0: gpio@10014000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x10014000 0x1000>;
+ gpio-controller;
+ interrupt-parent = <&intc_fpga1176>;
+ interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ fpga_gpio1: gpio@10015000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x10015000 0x1000>;
+ gpio-controller;
+ interrupt-parent = <&intc_fpga1176>;
+ interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+ fpga_rtc: rtc@10017000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x10017000 0x1000>;
+ interrupt-parent = <&intc_fpga1176>;
+ interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&pclk>;
+ clock-names = "apb_pclk";
+ };
+
+
+ };
+};
clock-frequency = <100000>;
status = "okay";
audio_codec: audio-codec@4a {
+ #sound-dai-cells = <0>;
compatible = "cirrus,cs42l51";
reg = <0x4a>;
};
broken-cd;
};
- pinctrl {
- /*
- * These pins might be muxed as I2S by
- * the bootloader, but it conflicts
- * with the real I2S pins that are
- * muxed using i2s_pins. We must mux
- * those pins to a function other than
- * I2S.
- */
- pinctrl-0 = <&hog_pins1 &hog_pins2>;
- pinctrl-names = "default";
-
- hog_pins1: hog-pins1 {
- marvell,pins = "mpp6", "mpp8", "mpp10",
- "mpp12", "mpp13";
- marvell,function = "gpio";
- };
-
- hog_pins2: hog-pins2 {
- marvell,pins = "mpp5", "mpp7", "mpp9";
- marvell,function = "gpo";
- };
- };
-
usb@50000 {
status = "okay";
};
};
spi0: spi@10600 {
+ pinctrl-0 = <&spi0_pins2>;
+ pinctrl-names = "default";
status = "okay";
spi-flash@0 {
};
sound {
- compatible = "marvell,a370db-audio";
- marvell,audio-controller = <&audio_controller>;
- marvell,audio-codec = <&audio_codec &spdif_out &spdif_in>;
- status = "okay";
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "Armada 370 DB Audio";
+ simple-audio-card,mclk-fs = <256>;
+ simple-audio-card,widgets =
+ "Headphone", "Out Jack",
+ "Line", "In Jack";
+ simple-audio-card,routing =
+ "Out Jack", "HPL",
+ "Out Jack", "HPR",
+ "AIN1L", "In Jack",
+ "AIN1L", "In Jack";
+ status = "okay";
+
+ simple-audio-card,dai-link@0 {
+ format = "i2s";
+ cpu {
+ sound-dai = <&audio_controller 0>;
+ };
+
+ codec {
+ sound-dai = <&audio_codec>;
+ };
+ };
+
+ simple-audio-card,dai-link@1 {
+ format = "i2s";
+ cpu {
+ sound-dai = <&audio_controller 1>;
+ };
+
+ codec {
+ sound-dai = <&spdif_out>;
+ };
+ };
+
+ simple-audio-card,dai-link@2 {
+ format = "i2s";
+ cpu {
+ sound-dai = <&audio_controller 1>;
+ };
+
+ codec {
+ sound-dai = <&spdif_in>;
+ };
+ };
};
spdif_out: spdif-out {
- compatible = "linux,spdif-dit";
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
};
spdif_in: spdif-in {
- compatible = "linux,spdif-dir";
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dir";
+ };
+};
+
+&pinctrl {
+ /*
+ * These pins might be muxed as I2S by
+ * the bootloader, but it conflicts
+ * with the real I2S pins that are
+ * muxed using i2s_pins. We must mux
+ * those pins to a function other than
+ * I2S.
+ */
+ pinctrl-0 = <&hog_pins1 &hog_pins2>;
+ pinctrl-names = "default";
+
+ hog_pins1: hog-pins1 {
+ marvell,pins = "mpp6", "mpp8", "mpp10",
+ "mpp12", "mpp13";
+ marvell,function = "gpio";
+ };
+
+ hog_pins2: hog-pins2 {
+ marvell,pins = "mpp5", "mpp7", "mpp9";
+ marvell,function = "gpo";
};
};
status = "okay";
};
- pinctrl {
- pwr_led_pin: pwr-led-pin {
- marvell,pins = "mpp63";
- marvell,function = "gpo";
- };
-
- stat_led_pins: stat-led-pins {
- marvell,pins = "mpp64", "mpp65";
- marvell,function = "gpio";
- };
- };
-
gpio_leds {
compatible = "gpio-leds";
pinctrl-names = "default";
};
};
};
+
+&pinctrl {
+ pwr_led_pin: pwr-led-pin {
+ marvell,pins = "mpp63";
+ marvell,function = "gpo";
+ };
+
+ stat_led_pins: stat-led-pins {
+ marvell,pins = "mpp64", "mpp65";
+ marvell,function = "gpio";
+ };
+};
+
pcie-controller {
status = "okay";
- /* Connected to Marvell SATA controller */
+ /* Connected to Marvell 88SE9170 SATA controller */
pcie@1,0 {
/* Port 0, Lane 0 */
status = "okay";
status = "okay";
};
+ /* eSATA interface */
sata@a0000 {
- nr-ports = <2>;
+ nr-ports = <1>;
status = "okay";
};
- pinctrl {
- power_led_pin: power-led-pin {
- marvell,pins = "mpp57";
- marvell,function = "gpio";
- };
-
- sata1_led_pin: sata1-led-pin {
- marvell,pins = "mpp15";
- marvell,function = "gpio";
- };
-
- sata2_led_pin: sata2-led-pin {
- marvell,pins = "mpp14";
- marvell,function = "gpio";
- };
-
- backup_led_pin: backup-led-pin {
- marvell,pins = "mpp56";
- marvell,function = "gpio";
- };
-
- backup_button_pin: backup-button-pin {
- marvell,pins = "mpp58";
- marvell,function = "gpio";
- };
-
- power_button_pin: power-button-pin {
- marvell,pins = "mpp62";
- marvell,function = "gpio";
- };
-
- reset_button_pin: reset-button-pin {
- marvell,pins = "mpp6";
- marvell,function = "gpio";
- };
-
- poweroff: poweroff {
- marvell,pins = "mpp8";
- marvell,function = "gpio";
- };
- };
-
mdio {
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
default-state = "keep";
};
- green-sata1-led {
- label = "rn102:green:sata1";
+ blue-sata1-led {
+ label = "rn102:blue:sata1";
gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
default-state = "on";
};
- green-sata2-led {
- label = "rn102:green:sata2";
+ blue-sata2-led {
+ label = "rn102:blue:sata2";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
default-state = "on";
};
- green-backup-led {
- label = "rn102:green:backup";
+ blue-backup-led {
+ label = "rn102:blue:backup";
gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
default-state = "on";
};
gpios = <&gpio0 8 GPIO_ACTIVE_LOW>;
};
};
+
+&pinctrl {
+ power_led_pin: power-led-pin {
+ marvell,pins = "mpp57";
+ marvell,function = "gpio";
+ };
+
+ sata1_led_pin: sata1-led-pin {
+ marvell,pins = "mpp15";
+ marvell,function = "gpio";
+ };
+
+ sata2_led_pin: sata2-led-pin {
+ marvell,pins = "mpp14";
+ marvell,function = "gpio";
+ };
+
+ backup_led_pin: backup-led-pin {
+ marvell,pins = "mpp56";
+ marvell,function = "gpio";
+ };
+
+ backup_button_pin: backup-button-pin {
+ marvell,pins = "mpp58";
+ marvell,function = "gpio";
+ };
+
+ power_button_pin: power-button-pin {
+ marvell,pins = "mpp62";
+ marvell,function = "gpio";
+ };
+
+ reset_button_pin: reset-button-pin {
+ marvell,pins = "mpp6";
+ marvell,function = "gpio";
+ };
+
+ poweroff: poweroff {
+ marvell,pins = "mpp8";
+ marvell,function = "gpio";
+ };
+};
status = "okay";
};
- pinctrl {
- poweroff: poweroff {
- marvell,pins = "mpp60";
- marvell,function = "gpio";
- };
-
- backup_button_pin: backup-button-pin {
- marvell,pins = "mpp52";
- marvell,function = "gpio";
- };
-
- power_button_pin: power-button-pin {
- marvell,pins = "mpp62";
- marvell,function = "gpio";
- };
-
- backup_led_pin: backup-led-pin {
- marvell,pins = "mpp63";
- marvell,function = "gpo";
- };
-
- power_led_pin: power-led-pin {
- marvell,pins = "mpp64";
- marvell,function = "gpio";
- };
-
- reset_button_pin: reset-button-pin {
- marvell,pins = "mpp65";
- marvell,function = "gpio";
- };
- };
-
mdio {
pinctrl-0 = <&mdio_pins>;
pinctrl-names = "default";
gpios = <&gpio1 28 GPIO_ACTIVE_LOW>;
};
};
+
+&pinctrl {
+ poweroff: poweroff {
+ marvell,pins = "mpp60";
+ marvell,function = "gpio";
+ };
+
+ backup_button_pin: backup-button-pin {
+ marvell,pins = "mpp52";
+ marvell,function = "gpio";
+ };
+
+ power_button_pin: power-button-pin {
+ marvell,pins = "mpp62";
+ marvell,function = "gpio";
+ };
+
+ backup_led_pin: backup-led-pin {
+ marvell,pins = "mpp63";
+ marvell,function = "gpo";
+ };
+
+ power_led_pin: power-led-pin {
+ marvell,pins = "mpp64";
+ marvell,function = "gpio";
+ };
+
+ reset_button_pin: reset-button-pin {
+ marvell,pins = "mpp65";
+ marvell,function = "gpio";
+ };
+};
};
internal-regs {
- pinctrl {
- fan_pins: fan-pins {
- marvell,pins = "mpp8";
- marvell,function = "gpio";
- };
-
- led_pins: led-pins {
- marvell,pins = "mpp32";
- marvell,function = "gpio";
- };
- };
-
serial@12000 {
status = "okay";
};
phy0: ethernet-phy@0 {
reg = <0>;
};
-
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
};
ethernet@70000 {
pinctrl-0 = <&ge1_rgmii_pins>;
pinctrl-names = "default";
status = "okay";
- phy = <&phy1>;
phy-mode = "rgmii-id";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
};
mvsdio@d4000 {
};
};
};
+
+ dsa@0 {
+ compatible = "marvell,dsa";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ dsa,ethernet = <ð1>;
+ dsa,mii-bus = <&mdio>;
+
+ switch@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10 0>; /* MDIO address 16, switch 0 in tree */
+
+ port@0 {
+ reg = <0>;
+ label = "lan0";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan3";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "cpu";
+ };
+ };
+ };
};
+
+&pinctrl {
+ fan_pins: fan-pins {
+ marvell,pins = "mpp8";
+ marvell,function = "gpio";
+ };
+
+ led_pins: led-pins {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+};
--- /dev/null
+/*
+ * Device Tree file for Synology DS213j
+ *
+ * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the old 0xd0000000).
+ * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
+ * bootloaders provided by Marvell. It is used in recent versions of
+ * DSM software provided by Synology. Nonetheless, some earlier boards
+ * were delivered with an older version of u-boot that left internal
+ * registers mapped at 0xd0000000. If you have such a device you will
+ * not be able to directly boot a kernel based on this Device Tree. In
+ * that case, the preferred solution is to update your bootloader (e.g.
+ * by upgrading to latest version of DSM, or building a new one and
+ * installing it from u-boot prompt) or adjust the Devive Tree
+ * (s/0xf1000000/0xd0000000/ in 'ranges' below).
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-370.dtsi"
+
+/ {
+ model = "Synology DS213j";
+ compatible = "synology,ds213j", "marvell,armada370",
+ "marvell,armada-370-xp";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ stdout-path = &uart0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x20000000>; /* 512 MB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
+ internal-regs {
+
+ /* RTC provided by Seiko S-35390A I2C RTC chip below */
+ rtc@10300 {
+ status = "disabled";
+ };
+
+ spi0: spi@10600 {
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q064";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <20000000>;
+
+ /*
+ * Warning!
+ *
+ * Synology u-boot uses its compiled-in environment
+ * and it seems Synology did not care to change u-boot
+ * default configuration in order to allow saving a
+ * modified environment at a sensible location. So,
+ * if you do a 'saveenv' under u-boot, your modified
+ * environment will be saved at 1MB after the start
+ * of the flash, i.e. in the middle of the uImage.
+ * For that reason, it is strongly advised not to
+ * change the default environment, unless you know
+ * what you are doing.
+ */
+ partition@00000000 { /* u-boot */
+ label = "RedBoot";
+ reg = <0x00000000 0x000c0000>; /* 768KB */
+ };
+
+ partition@000c0000 { /* uImage */
+ label = "zImage";
+ reg = <0x000c0000 0x002d0000>; /* 2880KB */
+ };
+
+ partition@00390000 { /* uInitramfs */
+ label = "rd.gz";
+ reg = <0x00390000 0x00440000>; /* 4250KB */
+ };
+
+ partition@007d0000 { /* MAC address and serial number */
+ label = "vendor";
+ reg = <0x007d0000 0x00010000>; /* 64KB */
+ };
+
+ partition@007e0000 {
+ label = "RedBoot config";
+ reg = <0x007e0000 0x00010000>; /* 64KB */
+ };
+
+ partition@007f0000 {
+ label = "FIS directory";
+ reg = <0x007f0000 0x00010000>; /* 64KB */
+ };
+ };
+ };
+
+ i2c@11000 {
+ compatible = "marvell,mv64xxx-i2c";
+ pinctrl-0 = <&i2c0_pins>;
+ pinctrl-names = "default";
+ clock-frequency = <400000>;
+ status = "okay";
+
+ /* Main device RTC chip */
+ s35390a: s35390a@30 {
+ compatible = "sii,s35390a";
+ reg = <0x30>;
+ };
+ };
+
+ /* Connected to a header on device's PCB */
+ serial@12000 {
+ status = "okay";
+ };
+
+ /* Connected to a TI MSP430F2111 for power control */
+ serial@12100 {
+ status = "okay";
+ };
+
+ poweroff@12100 {
+ compatible = "synology,power-off";
+ reg = <0x12100 0x100>;
+ clocks = <&coreclk 0>;
+ };
+
+ /* rear USB port, near reset button */
+ usb@50000 {
+ status = "okay";
+ };
+
+ /* rear USB port, near RJ45 port */
+ usb@51000 {
+ status = "okay";
+ };
+
+ mdio {
+ phy1: ethernet-phy@1 { /* Marvell 88E1512 */
+ reg = <1>;
+ };
+ };
+
+ ethernet@70000 {
+ status = "okay";
+ phy = <&phy1>;
+ phy-mode = "sgmii";
+ };
+
+ sata@a0000 {
+ nr-ports = <2>;
+ status = "okay";
+ };
+ };
+ };
+
+ gpio-fan-32-38 {
+ status = "okay";
+ compatible = "gpio-fan";
+ pinctrl-0 = <&fan_ctrl_low_pin &fan_ctrl_mid_pin
+ &fan_ctrl_high_pin &fan_alarm_pin>;
+ pinctrl-names = "default";
+ gpios = <&gpio1 31 GPIO_ACTIVE_HIGH
+ &gpio2 0 GPIO_ACTIVE_HIGH
+ &gpio2 1 GPIO_ACTIVE_HIGH>;
+ alarm-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = < 0 0
+ 1000 1
+ 1150 2
+ 1350 4
+ 1500 3
+ 1650 5
+ 1750 6
+ 1900 7 >;
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-0 = <&disk1_led_pin
+ &disk2_led_pin>;
+ pinctrl-names = "default";
+
+ disk1-led-amber {
+ label = "synology:amber:disk1";
+ gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+
+ disk2-led-amber {
+ label = "synology:amber:disk2";
+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ default-state = "keep";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin>;
+ pinctrl-names = "default";
+
+ sata1_regulator: sata1-regulator {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "SATA1 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <2000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ };
+
+ sata2_regulator: sata2-regulator {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "SATA2 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <4000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pinctrl {
+ disk1_led_pin: disk1-led-pin {
+ marvell,pins = "mpp31";
+ marvell,function = "gpio";
+ };
+
+ disk2_led_pin: disk2-led-pin {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+
+ sata1_pwr_pin: sata1-pwr-pin {
+ marvell,pins = "mpp37";
+ marvell,function = "gpio";
+ };
+
+ sata2_pwr_pin: sata2-pwr-pin {
+ marvell,pins = "mpp62";
+ marvell,function = "gpio";
+ };
+
+ sata1_pres_pin: sata1-pres-pin {
+ marvell,pins = "mpp60";
+ marvell,function = "gpio";
+ };
+
+ sata2_pres_pin: sata2-pres-pin {
+ marvell,pins = "mpp48";
+ marvell,function = "gpio";
+ };
+
+ syno_id_bit0_pin: syno-id-bit0-pin {
+ marvell,pins = "mpp55";
+ marvell,function = "gpio";
+ };
+
+ syno_id_bit1_pin: syno-id-bit1-pin {
+ marvell,pins = "mpp56";
+ marvell,function = "gpio";
+ };
+
+ syno_id_bit2_pin: syno-id-bit2-pin {
+ marvell,pins = "mpp57";
+ marvell,function = "gpio";
+ };
+
+ syno_id_bit3_pin: syno-id-bit3-pin {
+ marvell,pins = "mpp58";
+ marvell,function = "gpio";
+ };
+
+ fan_ctrl_low_pin: fan-ctrl-low-pin {
+ marvell,pins = "mpp65";
+ marvell,function = "gpio";
+ };
+
+ fan_ctrl_mid_pin: fan-ctrl-mid-pin {
+ marvell,pins = "mpp64";
+ marvell,function = "gpio";
+ };
+
+ fan_ctrl_high_pin: fan-ctrl-high-pin {
+ marvell,pins = "mpp63";
+ marvell,function = "gpo";
+ };
+
+ fan_alarm_pin: fan-alarm-pin {
+ marvell,pins = "mpp38";
+ marvell,function = "gpio";
+ };
+};
status = "disabled";
};
- serial@12000 {
+ uart0: serial@12000 {
compatible = "snps,dw-apb-uart";
reg = <0x12000 0x100>;
reg-shift = <2>;
clocks = <&coreclk 0>;
status = "disabled";
};
- serial@12100 {
+
+ uart1: serial@12100 {
compatible = "snps,dw-apb-uart";
reg = <0x12100 0x100>;
reg-shift = <2>;
status = "disabled";
};
+ pinctrl: pin-ctrl@18000 {
+ reg = <0x18000 0x38>;
+ };
+
coredivclk: corediv-clock@18740 {
compatible = "marvell,armada-370-corediv-clock";
reg = <0x18740 0xc>;
mbusc: mbus-controller@20000 {
compatible = "marvell,mbus-controller";
- reg = <0x20000 0x100>, <0x20180 0x20>;
+ reg = <0x20000 0x100>, <0x20180 0x20>,
+ <0x20250 0x8>;
};
mpic: interrupt-controller@20000 {
status = "disabled";
};
- mdio {
+ mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
compatible = "marvell,orion-mdio";
compatible = "marvell,aurora-outer-cache";
reg = <0x08000 0x1000>;
cache-id-part = <0x100>;
+ cache-unified;
wt-override;
};
- i2c0: i2c@11000 {
- reg = <0x11000 0x20>;
+ /*
+ * Default SPI pinctrl setting, can be overwritten on
+ * board level if a different configuration is used.
+ */
+ spi0: spi@10600 {
+ pinctrl-0 = <&spi0_pins1>;
+ pinctrl-names = "default";
};
- i2c1: i2c@11100 {
- reg = <0x11100 0x20>;
+ spi1: spi@10680 {
+ pinctrl-0 = <&spi1_pins>;
+ pinctrl-names = "default";
};
- system-controller@18200 {
- compatible = "marvell,armada-370-xp-system-controller";
- reg = <0x18200 0x100>;
+ i2c0: i2c@11000 {
+ reg = <0x11000 0x20>;
};
- pinctrl {
- compatible = "marvell,mv88f6710-pinctrl";
- reg = <0x18000 0x38>;
-
- sdio_pins1: sdio-pins1 {
- marvell,pins = "mpp9", "mpp11", "mpp12",
- "mpp13", "mpp14", "mpp15";
- marvell,function = "sd0";
- };
-
- sdio_pins2: sdio-pins2 {
- marvell,pins = "mpp47", "mpp48", "mpp49",
- "mpp50", "mpp51", "mpp52";
- marvell,function = "sd0";
- };
-
- sdio_pins3: sdio-pins3 {
- marvell,pins = "mpp48", "mpp49", "mpp50",
- "mpp51", "mpp52", "mpp53";
- marvell,function = "sd0";
- };
-
- i2c0_pins: i2c0-pins {
- marvell,pins = "mpp2", "mpp3";
- marvell,function = "i2c0";
- };
-
- i2s_pins1: i2s-pins1 {
- marvell,pins = "mpp5", "mpp6", "mpp7",
- "mpp8", "mpp9", "mpp10",
- "mpp12", "mpp13";
- marvell,function = "audio";
- };
-
- i2s_pins2: i2s-pins2 {
- marvell,pins = "mpp49", "mpp47", "mpp50",
- "mpp59", "mpp57", "mpp61",
- "mpp62", "mpp60", "mpp58";
- marvell,function = "audio";
- };
-
- mdio_pins: mdio-pins {
- marvell,pins = "mpp17", "mpp18";
- marvell,function = "ge";
- };
-
- ge0_rgmii_pins: ge0-rgmii-pins {
- marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8",
- "mpp9", "mpp10", "mpp11", "mpp12",
- "mpp13", "mpp14", "mpp15", "mpp16";
- marvell,function = "ge0";
- };
-
- ge1_rgmii_pins: ge1-rgmii-pins {
- marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22",
- "mpp23", "mpp24", "mpp25", "mpp26",
- "mpp27", "mpp28", "mpp29", "mpp30";
- marvell,function = "ge1";
- };
+ i2c1: i2c@11100 {
+ reg = <0x11100 0x20>;
};
gpio0: gpio@18100 {
interrupts = <91>;
};
+ /*
+ * Default UART pinctrl setting without RTS/CTS, can
+ * be overwritten on board level if a different
+ * configuration is used.
+ */
+ uart0: serial@12000 {
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+ };
+
+ uart1: serial@12100 {
+ pinctrl-0 = <&uart1_pins>;
+ pinctrl-names = "default";
+ };
+
+ system-controller@18200 {
+ compatible = "marvell,armada-370-xp-system-controller";
+ reg = <0x18200 0x100>;
+ };
+
gateclk: clock-gating-control@18220 {
compatible = "marvell,armada-370-gating-clock";
reg = <0x18220 0x4>;
};
audio_controller: audio-controller@30000 {
+ #sound-dai-cells = <1>;
compatible = "marvell,armada370-audio";
reg = <0x30000 0x4000>;
interrupts = <93>;
};
};
};
+
+&pinctrl {
+ compatible = "marvell,mv88f6710-pinctrl";
+
+ spi0_pins1: spi0-pins1 {
+ marvell,pins = "mpp33", "mpp34",
+ "mpp35", "mpp36";
+ marvell,function = "spi0";
+ };
+
+ spi0_pins2: spi0_pins2 {
+ marvell,pins = "mpp32", "mpp63",
+ "mpp64", "mpp65";
+ marvell,function = "spi0";
+ };
+
+ spi1_pins: spi1-pins {
+ marvell,pins = "mpp49", "mpp50",
+ "mpp51", "mpp52";
+ marvell,function = "spi1";
+ };
+
+ uart0_pins: uart0-pins {
+ marvell,pins = "mpp0", "mpp1";
+ marvell,function = "uart0";
+ };
+
+ uart1_pins: uart1-pins {
+ marvell,pins = "mpp41", "mpp42";
+ marvell,function = "uart1";
+ };
+
+ sdio_pins1: sdio-pins1 {
+ marvell,pins = "mpp9", "mpp11", "mpp12",
+ "mpp13", "mpp14", "mpp15";
+ marvell,function = "sd0";
+ };
+
+ sdio_pins2: sdio-pins2 {
+ marvell,pins = "mpp47", "mpp48", "mpp49",
+ "mpp50", "mpp51", "mpp52";
+ marvell,function = "sd0";
+ };
+
+ sdio_pins3: sdio-pins3 {
+ marvell,pins = "mpp48", "mpp49", "mpp50",
+ "mpp51", "mpp52", "mpp53";
+ marvell,function = "sd0";
+ };
+
+ i2c0_pins: i2c0-pins {
+ marvell,pins = "mpp2", "mpp3";
+ marvell,function = "i2c0";
+ };
+
+ i2s_pins1: i2s-pins1 {
+ marvell,pins = "mpp5", "mpp6", "mpp7",
+ "mpp8", "mpp9", "mpp10",
+ "mpp12", "mpp13";
+ marvell,function = "audio";
+ };
+
+ i2s_pins2: i2s-pins2 {
+ marvell,pins = "mpp49", "mpp47", "mpp50",
+ "mpp59", "mpp57", "mpp61",
+ "mpp62", "mpp60", "mpp58";
+ marvell,function = "audio";
+ };
+
+ mdio_pins: mdio-pins {
+ marvell,pins = "mpp17", "mpp18";
+ marvell,function = "ge";
+ };
+
+ ge0_rgmii_pins: ge0-rgmii-pins {
+ marvell,pins = "mpp5", "mpp6", "mpp7", "mpp8",
+ "mpp9", "mpp10", "mpp11", "mpp12",
+ "mpp13", "mpp14", "mpp15", "mpp16";
+ marvell,function = "ge0";
+ };
+
+ ge1_rgmii_pins: ge1-rgmii-pins {
+ marvell,pins = "mpp19", "mpp20", "mpp21", "mpp22",
+ "mpp23", "mpp24", "mpp25", "mpp26",
+ "mpp27", "mpp28", "mpp29", "mpp30";
+ marvell,function = "ge1";
+ };
+};
#clock-cells = <0>;
clock-frequency = <2000000000>;
};
+ /* 25 MHz reference crystal */
+ refclk: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
};
cpus {
<&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
<&mpic 5>,
<&mpic 6>;
- clocks = <&coreclk 0>;
+ clocks = <&coreclk 0>, <&refclk>;
+ clock-names = "nbclk", "fixed";
};
watchdog@20300 {
compatible = "marvell,armada-375-wdt";
reg = <0x20300 0x34>, <0x20704 0x4>, <0x18254 0x4>;
- clocks = <&coreclk 0>;
+ clocks = <&coreclk 0>, <&refclk>;
+ clock-names = "nbclk", "fixed";
};
cpurst@20800 {
};
sdhci@d8000 {
- clock-frequency = <200000000>;
broken-cd;
wp-inverted;
bus-width = <8>;
status = "okay";
+ no-1-8-v;
};
usb3@f0000 {
aliases {
gpio0 = &gpio0;
gpio1 = &gpio1;
- eth0 = ð0;
- eth1 = ð1;
- eth2 = ð2;
+ ethernet0 = ð0;
+ ethernet1 = ð1;
+ ethernet2 = ð2;
};
soc {
};
internal-regs {
- pinctrl {
- pinctrl-0 = <&pmx_phy_int>;
- pinctrl-names = "default";
-
- pmx_ge0: pmx-ge0 {
- marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3",
- "mpp4", "mpp5", "mpp6", "mpp7",
- "mpp8", "mpp9", "mpp10", "mpp11";
- marvell,function = "ge0";
- };
-
- pmx_ge1: pmx-ge1 {
- marvell,pins = "mpp12", "mpp13", "mpp14", "mpp15",
- "mpp16", "mpp17", "mpp18", "mpp19",
- "mpp20", "mpp21", "mpp22", "mpp23";
- marvell,function = "ge1";
- };
-
- pmx_keys: pmx-keys {
- marvell,pins = "mpp33";
- marvell,function = "gpio";
- };
-
- pmx_spi: pmx-spi {
- marvell,pins = "mpp36", "mpp37", "mpp38", "mpp39";
- marvell,function = "spi";
- };
-
- pmx_phy_int: pmx-phy-int {
- marvell,pins = "mpp32";
- marvell,function = "gpio";
- };
- };
-
serial@12000 {
status = "okay";
};
};
ethernet@70000 {
- pinctrl-0 = <&pmx_ge0>;
+ pinctrl-0 = <&ge0_rgmii_pins>;
pinctrl-names = "default";
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
ethernet@74000 {
- pinctrl-0 = <&pmx_ge1>;
+ pinctrl-0 = <&ge1_rgmii_pins>;
pinctrl-names = "default";
status = "okay";
phy = <&phy1>;
spi0: spi@10600 {
status = "okay";
- pinctrl-0 = <&pmx_spi>;
- pinctrl-names = "default";
spi-flash@0 {
#address-cells = <1>;
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
- pinctrl-0 = <&pmx_keys>;
+ pinctrl-0 = <&keys_pin>;
pinctrl-names = "default";
button@1 {
};
};
};
+
+&pinctrl {
+ pinctrl-0 = <&phy_int_pin>;
+ pinctrl-names = "default";
+
+ keys_pin: keys-pin {
+ marvell,pins = "mpp33";
+ marvell,function = "gpio";
+ };
+
+ phy_int_pin: phy-int-pin {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+};
*/
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
#include "armada-xp-mv78460.dtsi"
/ {
<0x00000001 0x00000000 0x00000001 0x00000000>;
};
+ cpus {
+ pm_pic {
+ ctrl-gpios = <&gpio0 16 GPIO_ACTIVE_LOW>,
+ <&gpio0 17 GPIO_ACTIVE_LOW>,
+ <&gpio0 18 GPIO_ACTIVE_LOW>;
+ };
+ };
+
soc {
ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
serial@12300 {
status = "okay";
};
-
+ pinctrl {
+ pinctrl-0 = <&pic_pins>;
+ pinctrl-names = "default";
+ pic_pins: pic-pins-0 {
+ marvell,pins = "mpp16", "mpp17",
+ "mpp18";
+ marvell,function = "gpio";
+ };
+ };
sata@a0000 {
nr-ports = <2>;
status = "okay";
chosen {
bootargs = "console=ttyS0,115200 earlyprintk";
- stdout-path = "/soc/internal-regs/serial@12000";
+ stdout-path = &uart0;
};
memory {
};
internal-regs {
- pinctrl {
- poweroff_pin: poweroff-pin {
- marvell,pins = "mpp24";
- marvell,function = "gpio";
- };
-
- power_button_pin: power-button-pin {
- marvell,pins = "mpp44";
- marvell,function = "gpio";
- };
-
- reset_button_pin: reset-button-pin {
- marvell,pins = "mpp45";
- marvell,function = "gpio";
- };
- select_button_pin: select-button-pin {
- marvell,pins = "mpp41";
- marvell,function = "gpio";
- };
-
- scroll_button_pin: scroll-button-pin {
- marvell,pins = "mpp42";
- marvell,function = "gpio";
- };
-
- hdd_led_pin: hdd-led-pin {
- marvell,pins = "mpp26";
- marvell,function = "gpio";
- };
- };
-
serial@12000 {
status = "okay";
};
};
ethernet@70000 {
+ pinctrl-0 = <&ge0_rgmii_pins>;
+ pinctrl-names = "default";
status = "okay";
phy = <&phy0>;
phy-mode = "rgmii-id";
};
ethernet@74000 {
+ pinctrl-0 = <&ge1_rgmii_pins>;
+ pinctrl-names = "default";
status = "okay";
phy = <&phy1>;
phy-mode = "rgmii-id";
reg = <0x2e>;
};
+ eeprom@50 {
+ compatible = "atmel,24c64";
+ reg = <0x50>;
+ };
+
pcf8563@51 {
compatible = "nxp,pcf8563";
reg = <0x51>;
gpio-controller;
#gpio-cells = <2>;
reg = <0>;
- registers-number = <2>;
+ registers-number = <1>;
spi-max-frequency = <100000>;
};
};
gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
};
};
+
+&pinctrl {
+ poweroff_pin: poweroff-pin {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+
+ power_button_pin: power-button-pin {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+
+ reset_button_pin: reset-button-pin {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ select_button_pin: select-button-pin {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+
+ scroll_button_pin: scroll-button-pin {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+
+ hdd_led_pin: hdd-led-pin {
+ marvell,pins = "mpp26";
+ marvell,function = "gpio";
+ };
+};
};
internal-regs {
- pinctrl {
- compatible = "marvell,mv78230-pinctrl";
- reg = <0x18000 0x38>;
-
- sdio_pins: sdio-pins {
- marvell,pins = "mpp30", "mpp31", "mpp32",
- "mpp33", "mpp34", "mpp35";
- marvell,function = "sd0";
- };
- };
-
gpio0: gpio@18100 {
compatible = "marvell,orion-gpio";
reg = <0x18100 0x40>;
};
};
};
+
+&pinctrl {
+ compatible = "marvell,mv78230-pinctrl";
+};
};
internal-regs {
- pinctrl {
- compatible = "marvell,mv78260-pinctrl";
- reg = <0x18000 0x38>;
-
- sdio_pins: sdio-pins {
- marvell,pins = "mpp30", "mpp31", "mpp32",
- "mpp33", "mpp34", "mpp35";
- marvell,function = "sd0";
- };
- };
-
gpio0: gpio@18100 {
compatible = "marvell,orion-gpio";
reg = <0x18100 0x40>;
};
};
};
+
+&pinctrl {
+ compatible = "marvell,mv78260-pinctrl";
+};
};
internal-regs {
- pinctrl {
- compatible = "marvell,mv78460-pinctrl";
- reg = <0x18000 0x38>;
-
- sdio_pins: sdio-pins {
- marvell,pins = "mpp30", "mpp31", "mpp32",
- "mpp33", "mpp34", "mpp35";
- marvell,function = "sd0";
- };
- };
-
gpio0: gpio@18100 {
compatible = "marvell,orion-gpio";
reg = <0x18100 0x40>;
};
};
};
+
+&pinctrl {
+ compatible = "marvell,mv78460-pinctrl";
+};
};
internal-regs {
- pinctrl {
- poweroff: poweroff {
- marvell,pins = "mpp42";
- marvell,function = "gpio";
- };
-
- power_button_pin: power-button-pin {
- marvell,pins = "mpp27";
- marvell,function = "gpio";
- };
-
- reset_button_pin: reset-button-pin {
- marvell,pins = "mpp41";
- marvell,function = "gpio";
- };
-
- sata1_led_pin: sata1-led-pin {
- marvell,pins = "mpp31";
- marvell,function = "gpio";
- };
-
- sata2_led_pin: sata2-led-pin {
- marvell,pins = "mpp40";
- marvell,function = "gpio";
- };
-
- sata3_led_pin: sata3-led-pin {
- marvell,pins = "mpp44";
- marvell,function = "gpio";
- };
-
- sata4_led_pin: sata4-led-pin {
- marvell,pins = "mpp47";
- marvell,function = "gpio";
- };
-
- sata1_power_pin: sata1-power-pin {
- marvell,pins = "mpp24";
- marvell,function = "gpio";
- };
-
- sata2_power_pin: sata2-power-pin {
- marvell,pins = "mpp25";
- marvell,function = "gpio";
- };
-
- sata3_power_pin: sata3-power-pin {
- marvell,pins = "mpp26";
- marvell,function = "gpio";
- };
-
- sata4_power_pin: sata4-power-pin {
- marvell,pins = "mpp28";
- marvell,function = "gpio";
- };
-
- sata1_pres_pin: sata1-pres-pin {
- marvell,pins = "mpp32";
- marvell,function = "gpio";
- };
-
- sata2_pres_pin: sata2-pres-pin {
- marvell,pins = "mpp33";
- marvell,function = "gpio";
- };
-
- sata3_pres_pin: sata3-pres-pin {
- marvell,pins = "mpp34";
- marvell,function = "gpio";
- };
-
- sata4_pres_pin: sata4-pres-pin {
- marvell,pins = "mpp35";
- marvell,function = "gpio";
- };
-
- err_led_pin: err-led-pin {
- marvell,pins = "mpp45";
- marvell,function = "gpio";
- };
+ /* Two rear eSATA ports */
+ sata@a0000 {
+ nr-ports = <2>;
+ status = "okay";
};
serial@12000 {
gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
};
};
+
+&pinctrl {
+ poweroff: poweroff {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+
+ power_button_pin: power-button-pin {
+ marvell,pins = "mpp27";
+ marvell,function = "gpio";
+ };
+
+ reset_button_pin: reset-button-pin {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+
+ sata1_led_pin: sata1-led-pin {
+ marvell,pins = "mpp31";
+ marvell,function = "gpio";
+ };
+
+ sata2_led_pin: sata2-led-pin {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+
+ sata3_led_pin: sata3-led-pin {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+
+ sata4_led_pin: sata4-led-pin {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+
+ sata1_power_pin: sata1-power-pin {
+ marvell,pins = "mpp24";
+ marvell,function = "gpio";
+ };
+
+ sata2_power_pin: sata2-power-pin {
+ marvell,pins = "mpp25";
+ marvell,function = "gpio";
+ };
+
+ sata3_power_pin: sata3-power-pin {
+ marvell,pins = "mpp26";
+ marvell,function = "gpio";
+ };
+
+ sata4_power_pin: sata4-power-pin {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+
+ sata1_pres_pin: sata1-pres-pin {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+
+ sata2_pres_pin: sata2-pres-pin {
+ marvell,pins = "mpp33";
+ marvell,function = "gpio";
+ };
+
+ sata3_pres_pin: sata3-pres-pin {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+
+ sata4_pres_pin: sata4-pres-pin {
+ marvell,pins = "mpp35";
+ marvell,function = "gpio";
+ };
+
+ err_led_pin: err-led-pin {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+};
serial@12100 {
status = "okay";
};
- pinctrl {
- led_pins: led-pins-0 {
- marvell,pins = "mpp49", "mpp51", "mpp53";
- marvell,function = "gpio";
- };
- };
+
leds {
compatible = "gpio-leds";
pinctrl-names = "default";
};
};
};
+
+&pinctrl {
+ led_pins: led-pins-0 {
+ marvell,pins = "mpp49", "mpp51", "mpp53";
+ marvell,function = "gpio";
+ };
+};
--- /dev/null
+/*
+ * Device Tree file for Synology DS414
+ *
+ * Copyright (C) 2014, Arnaud EBALARD <arno@natisbad.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ *
+ * Note: this Device Tree assumes that the bootloader has remapped the
+ * internal registers to 0xf1000000 (instead of the old 0xd0000000).
+ * The 0xf1000000 is the default used by the recent, DT-capable, U-Boot
+ * bootloaders provided by Marvell. It is used in recent versions of
+ * DSM software provided by Synology. Nonetheless, some earlier boards
+ * were delivered with an older version of u-boot that left internal
+ * registers mapped at 0xd0000000. If you have such a device you will
+ * not be able to directly boot a kernel based on this Device Tree. In
+ * that case, the preferred solution is to update your bootloader (e.g.
+ * by upgrading to latest version of DSM, or building a new one and
+ * installing it from u-boot prompt) or adjust the Devive Tree
+ * (s/0xf1000000/0xd0000000/ in 'ranges' below).
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "armada-xp-mv78230.dtsi"
+
+/ {
+ model = "Synology DS414";
+ compatible = "synology,ds414", "marvell,armadaxp-mv78230",
+ "marvell,armadaxp", "marvell,armada-370-xp";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlyprintk";
+ stdout-path = &uart0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0 0x00000000 0 0x40000000>; /* 1GB */
+ };
+
+ soc {
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xf1000000 0x100000
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>;
+
+ pcie-controller {
+ status = "okay";
+
+ /*
+ * Connected to Marvell 88SX7042 SATA-II controller
+ * handling the four disks.
+ */
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ status = "okay";
+ };
+
+ /*
+ * Connected to EtronTech EJ168A XHCI controller
+ * providing the two rear USB 3.0 ports.
+ */
+ pcie@5,0 {
+ /* Port 1, Lane 0 */
+ status = "okay";
+ };
+ };
+
+ internal-regs {
+
+ /* RTC is provided by Seiko S-35390A below */
+ rtc@10300 {
+ status = "disabled";
+ };
+
+ spi0: spi@10600 {
+ status = "okay";
+
+ spi-flash@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "micron,n25q064";
+ reg = <0>; /* Chip select 0 */
+ spi-max-frequency = <20000000>;
+
+ /*
+ * Warning!
+ *
+ * Synology u-boot uses its compiled-in environment
+ * and it seems Synology did not care to change u-boot
+ * default configuration in order to allow saving a
+ * modified environment at a sensible location. So,
+ * if you do a 'saveenv' under u-boot, your modified
+ * environment will be saved at 1MB after the start
+ * of the flash, i.e. in the middle of the uImage.
+ * For that reason, it is strongly advised not to
+ * change the default environment, unless you know
+ * what you are doing.
+ */
+ partition@00000000 { /* u-boot */
+ label = "RedBoot";
+ reg = <0x00000000 0x000d0000>; /* 832KB */
+ };
+
+ partition@000c0000 { /* uImage */
+ label = "zImage";
+ reg = <0x000d0000 0x002d0000>; /* 2880KB */
+ };
+
+ partition@003a0000 { /* uInitramfs */
+ label = "rd.gz";
+ reg = <0x003a0000 0x00430000>; /* 4250KB */
+ };
+
+ partition@007d0000 { /* MAC address and serial number */
+ label = "vendor";
+ reg = <0x007d0000 0x00010000>; /* 64KB */
+ };
+
+ partition@007e0000 {
+ label = "RedBoot config";
+ reg = <0x007e0000 0x00010000>; /* 64KB */
+ };
+
+ partition@007f0000 {
+ label = "FIS directory";
+ reg = <0x007f0000 0x00010000>; /* 64KB */
+ };
+ };
+ };
+
+ i2c@11000 {
+ clock-frequency = <400000>;
+ status = "okay";
+
+ s35390a: s35390a@30 {
+ compatible = "sii,s35390a";
+ reg = <0x30>;
+ };
+ };
+
+ /* Connected to a header on device's PCB. This
+ * provides the main console for the device.
+ *
+ * Warning: the device may not boot with a 3.3V
+ * USB-serial converter connected when the power
+ * button is pressed. The converter needs to be
+ * connected a few seconds after pressing the
+ * power button. This is possibly due to UART0_TXD
+ * pin being sampled at reset (bit 0 of SAR).
+ */
+ serial@12000 {
+ status = "okay";
+ };
+
+ /* Connected to a Microchip PIC16F883 for power control */
+ serial@12100 {
+ status = "okay";
+ };
+
+ poweroff@12100 {
+ compatible = "synology,power-off";
+ reg = <0x12100 0x100>;
+ clocks = <&coreclk 0>;
+ };
+
+ /* Front USB 2.0 port */
+ usb@50000 {
+ status = "okay";
+ };
+
+ mdio {
+ phy0: ethernet-phy@0 { /* Marvell 88E1512 */
+ reg = <0>;
+ };
+
+ phy1: ethernet-phy@1 { /* Marvell 88E1512 */
+ reg = <1>;
+ };
+ };
+
+ ethernet@70000 {
+ status = "okay";
+ pinctrl-0 = <&ge0_rgmii_pins>;
+ pinctrl-names = "default";
+ phy = <&phy1>;
+ phy-mode = "rgmii-id";
+ };
+
+ ethernet@74000 {
+ pinctrl-0 = <&ge1_rgmii_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ phy = <&phy0>;
+ phy-mode = "rgmii-id";
+ };
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-0 = <&sata1_pwr_pin &sata2_pwr_pin
+ &sata3_pwr_pin &sata4_pwr_pin>;
+ pinctrl-names = "default";
+
+ sata1_regulator: sata1-regulator {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "SATA1 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <2000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ sata2_regulator: sata2-regulator {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "SATA2 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <4000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+ };
+
+ sata3_regulator: sata3-regulator {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "SATA3 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <6000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+
+ sata4_regulator: sata4-regulator {
+ compatible = "regulator-fixed";
+ reg = <4>;
+ regulator-name = "SATA4 Power";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <8000000>;
+ enable-active-high;
+ regulator-always-on;
+ regulator-boot-on;
+ gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+ };
+ };
+};
+
+&pinctrl {
+ sata1_pwr_pin: sata1-pwr-pin {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+
+ sata2_pwr_pin: sata2-pwr-pin {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+
+ sata3_pwr_pin: sata3-pwr-pin {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+
+ sata4_pwr_pin: sata4-pwr-pin {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+
+ sata1_pres_pin: sata1-pres-pin {
+ marvell,pins = "mpp34";
+ marvell,function = "gpio";
+ };
+
+ sata2_pres_pin: sata2-pres-pin {
+ marvell,pins = "mpp35";
+ marvell,function = "gpio";
+ };
+
+ sata3_pres_pin: sata3-pres-pin {
+ marvell,pins = "mpp40";
+ marvell,function = "gpio";
+ };
+
+ sata4_pres_pin: sata4-pres-pin {
+ marvell,pins = "mpp41";
+ marvell,function = "gpio";
+ };
+
+ syno_id_bit0_pin: syno-id-bit0-pin {
+ marvell,pins = "mpp26";
+ marvell,function = "gpio";
+ };
+
+ syno_id_bit1_pin: syno-id-bit1-pin {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+
+ syno_id_bit2_pin: syno-id-bit2-pin {
+ marvell,pins = "mpp29";
+ marvell,function = "gpio";
+ };
+
+ fan1_alarm_pin: fan1-alarm-pin {
+ marvell,pins = "mpp33";
+ marvell,function = "gpio";
+ };
+
+ fan2_alarm_pin: fan2-alarm-pin {
+ marvell,pins = "mpp32";
+ marvell,function = "gpio";
+ };
+};
};
internal-regs {
+ sdramc@1400 {
+ compatible = "marvell,armada-xp-sdram-controller";
+ reg = <0x1400 0x500>;
+ };
+
L2: l2-cache {
compatible = "marvell,aurora-system-cache";
reg = <0x08000 0x1000>;
cache-id-part = <0x100>;
+ cache-unified;
wt-override;
};
+ spi0: spi@10600 {
+ pinctrl-0 = <&spi0_pins>;
+ pinctrl-names = "default";
+ };
+
i2c0: i2c@11000 {
compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c";
reg = <0x11000 0x100>;
reg = <0x11100 0x100>;
};
- serial@12200 {
+ uart2: serial@12200 {
compatible = "snps,dw-apb-uart";
+ pinctrl-0 = <&uart2_pins>;
+ pinctrl-names = "default";
reg = <0x12200 0x100>;
reg-shift = <2>;
interrupts = <43>;
clocks = <&coreclk 0>;
status = "disabled";
};
- serial@12300 {
+
+ uart3: serial@12300 {
compatible = "snps,dw-apb-uart";
+ pinctrl-0 = <&uart3_pins>;
+ pinctrl-names = "default";
reg = <0x12300 0x100>;
reg-shift = <2>;
interrupts = <44>;
};
};
};
+
+&pinctrl {
+ ge0_gmii_pins: ge0-gmii-pins {
+ marvell,pins =
+ "mpp0", "mpp1", "mpp2", "mpp3",
+ "mpp4", "mpp5", "mpp6", "mpp7",
+ "mpp8", "mpp9", "mpp10", "mpp11",
+ "mpp12", "mpp13", "mpp14", "mpp15",
+ "mpp16", "mpp17", "mpp18", "mpp19",
+ "mpp20", "mpp21", "mpp22", "mpp23";
+ marvell,function = "ge0";
+ };
+
+ ge0_rgmii_pins: ge0-rgmii-pins {
+ marvell,pins =
+ "mpp0", "mpp1", "mpp2", "mpp3",
+ "mpp4", "mpp5", "mpp6", "mpp7",
+ "mpp8", "mpp9", "mpp10", "mpp11";
+ marvell,function = "ge0";
+ };
+
+ ge1_rgmii_pins: ge1-rgmii-pins {
+ marvell,pins =
+ "mpp12", "mpp13", "mpp14", "mpp15",
+ "mpp16", "mpp17", "mpp18", "mpp19",
+ "mpp20", "mpp21", "mpp22", "mpp23";
+ marvell,function = "ge1";
+ };
+
+ sdio_pins: sdio-pins {
+ marvell,pins = "mpp30", "mpp31", "mpp32",
+ "mpp33", "mpp34", "mpp35";
+ marvell,function = "sd0";
+ };
+
+ spi0_pins: spi0-pins {
+ marvell,pins = "mpp36", "mpp37",
+ "mpp38", "mpp39";
+ marvell,function = "spi";
+ };
+
+ uart2_pins: uart2-pins {
+ marvell,pins = "mpp42", "mpp43";
+ marvell,function = "uart2";
+ };
+
+ uart3_pins: uart3-pins {
+ marvell,pins = "mpp44", "mpp45";
+ marvell,function = "uart3";
+ };
+};
interrupts-extended = <&pmc AT91_PMC_LOCKB>;
clocks = <&main>;
reg = <1>;
- atmel,clk-input-range = <1000000 5000000>;
+ atmel,clk-input-range = <1000000 32000000>;
#atmel,pll-clk-output-range-cells = <4>;
- atmel,pll-clk-output-ranges = <70000000 130000000 1 1>;
+ atmel,pll-clk-output-ranges = <80000000 200000000 0 1>,
+ <190000000 240000000 2 1>;
};
mck: masterck {
};
};
+ can {
+ pinctrl_can_rx_tx: can_rx_tx {
+ atmel,pins =
+ <AT91_PIOA 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* CANRX, conflicts with IRQ0 */
+ AT91_PIOA 13 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* CANTX, conflicts with PCK0 */
+ };
+ };
+
pioA: gpio@fffff200 {
compatible = "atmel,at91rm9200-gpio";
reg = <0xfffff200 0x200>;
clock-names = "pwm_clk";
status = "disabled";
};
+
+ can: can@fffac000 {
+ compatible = "atmel,at91sam9263-can";
+ reg = <0xfffac000 0x300>;
+ interrupts = <12 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can_rx_tx>;
+ clocks = <&can_clk>;
+ clock-names = "can_clk";
+ status = "disabled";
+ };
};
fb0: fb@0x00700000 {
#include "at91sam9x5_usart3.dtsi"
#include "at91sam9x5_macb0.dtsi"
#include "at91sam9x5_macb1.dtsi"
+#include "at91sam9x5_can.dtsi"
/ {
model = "Atmel AT91SAM9X25 SoC";
#include "at91sam9x5.dtsi"
#include "at91sam9x5_macb0.dtsi"
+#include "at91sam9x5_can.dtsi"
/ {
model = "Atmel AT91SAM9X35 SoC";
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
+ dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(8)>,
+ <&dma1 1 (AT91_DMA_CFG_PER_ID(9) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+ dma-names = "tx", "rx";
clocks = <&mck>;
clock-names = "usart";
status = "disabled";
interrupts = <5 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
+ dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(3)>,
+ <&dma0 1 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+ dma-names = "tx", "rx";
clocks = <&usart0_clk>;
clock-names = "usart";
status = "disabled";
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
+ dmas = <&dma0 1 AT91_DMA_CFG_PER_ID(5)>,
+ <&dma0 1 (AT91_DMA_CFG_PER_ID(6) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+ dma-names = "tx", "rx";
clocks = <&usart1_clk>;
clock-names = "usart";
status = "disabled";
interrupts = <7 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
+ dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(12)>,
+ <&dma1 1 (AT91_DMA_CFG_PER_ID(13) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+ dma-names = "tx", "rx";
clocks = <&usart2_clk>;
clock-names = "usart";
status = "disabled";
/*
- * at91sam9x5_macb0.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
+ * at91sam9x5_can.dtsi - Device Tree Include file for AT91SAM9x5 SoC with 1
* Ethernet interface.
*
* Copyright (C) 2013 Boris BREZILLON <b.brezillon@overkiz.com>
reg = <29>;
};
- can1_clk: can1_clk {
- #clock-cells = <0>;
- reg = <30>;
- };
+ can1_clk: can1_clk {
+ #clock-cells = <0>;
+ reg = <30>;
+ };
+ };
+ };
+
+ can0: can@f8000000 {
+ compatible = "atmel,at91sam9x5-can";
+ reg = <0xf8000000 0x300>;
+ interrupts = <29 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can0_rx_tx>;
+ clocks = <&can0_clk>;
+ clock-names = "can_clk";
+ status = "disabled";
+ };
+
+ can1: can@f8004000 {
+ compatible = "atmel,at91sam9x5-can";
+ reg = <0xf8004000 0x300>;
+ interrupts = <30 IRQ_TYPE_LEVEL_HIGH 3>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1_rx_tx>;
+ clocks = <&can1_clk>;
+ clock-names = "can_clk";
+ status = "disabled";
+ };
+
+ pinctrl@fffff400 {
+ can0 {
+ pinctrl_can0_rx_tx: can0_rx_tx {
+ atmel,pins =
+ <AT91_PIOA 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANRX0, conflicts with DRXD */
+ AT91_PIOA 10 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* CANTX0, conflicts with DTXD */
+ };
+ };
+
+ can1 {
+ pinctrl_can1_rx_tx: can1_rx_tx {
+ atmel,pins =
+ <AT91_PIOA 6 AT91_PERIPH_B AT91_PINCTRL_NONE /* CANRX1, conflicts with RXD1 */
+ AT91_PIOA 5 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* CANTX1, conflicts with TXD1 */
+ };
};
};
};
interrupts = <8 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
+ dmas = <&dma1 1 AT91_DMA_CFG_PER_ID(14)>,
+ <&dma1 1 (AT91_DMA_CFG_PER_ID(15) | AT91_DMA_CFG_FIFOCFG_ASAP)>;
+ dma-names = "tx", "rx";
clocks = <&usart3_clk>;
clock-names = "usart";
status = "disabled";
reg = <0x90020000 0x10000>;
interrupts = <31>;
clocks = <&clks 35>;
+ resets = <&rstc 6>;
};
};
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clks 19>;
+ resets = <&rstc 26>;
status = "disabled";
};
#address-cells = <1>;
#size-cells = <0>;
clocks = <&clks 20>;
+ resets = <&rstc 27>;
status = "disabled";
};
sirf,function = "sdmmc5";
};
};
+ i2s_mclk_pins_a: i2s_mclk@0 {
+ i2s_mclk {
+ sirf,pins = "i2smclkgrp";
+ sirf,function = "i2s_mclk";
+ };
+ };
+ i2s_ext_clk_input_pins_a: i2s_ext_clk_input@0 {
+ i2s_ext_clk_input {
+ sirf,pins = "i2s_ext_clk_inputgrp";
+ sirf,function = "i2s_ext_clk_input";
+ };
+ };
i2s_pins_a: i2s@0 {
i2s {
sirf,pins = "i2sgrp";
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2014 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ osc: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <1>;
+ clock-frequency = <25000000>;
+ };
+
+ apb_clk: apb_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000000>;
+ };
+
+ periph_clk: periph_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <500000000>;
+ };
+
+ sdio_clk: lcpll_ch2 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <200000000>;
+ };
+
+ axi81_clk: axi81_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+
+ keypad_clk: keypad_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <31806>;
+ };
+
+ adc_clk: adc_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1562500>;
+ };
+
+ pwm_clk: pwm_clk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000>;
+ };
+
+ lcd_clk: mipipll_ch1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ };
+};
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2014 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "brcm,cygnus";
+ model = "Broadcom Cygnus SoC";
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ reg = <0x0>;
+ };
+ };
+
+ /include/ "bcm-cygnus-clock.dtsi"
+
+ amba {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "arm,amba-bus", "simple-bus";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ wdt@18009000 {
+ compatible = "arm,sp805" , "arm,primecell";
+ reg = <0x18009000 0x1000>;
+ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi81_clk>;
+ clock-names = "apb_pclk";
+ };
+ };
+
+ uart0: serial@18020000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18020000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi81_clk>;
+ clock-frequency = <100000000>;
+ status = "disabled";
+ };
+
+ uart1: serial@18021000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18021000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi81_clk>;
+ clock-frequency = <100000000>;
+ status = "disabled";
+ };
+
+ uart2: serial@18022000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18020000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi81_clk>;
+ clock-frequency = <100000000>;
+ status = "disabled";
+ };
+
+ uart3: serial@18023000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x18023000 0x100>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&axi81_clk>;
+ clock-frequency = <100000000>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@19021000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x19021000 0x1000>,
+ <0x19020100 0x100>;
+ };
+
+ L2: l2-cache {
+ compatible = "arm,pl310-cache";
+ reg = <0x19022000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ timer@19020200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x19020200 0x100>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&periph_clk>;
+ };
+
+};
--- /dev/null
+/dts-v1/;
+/include/ "bcm2835-rpi.dtsi"
+
+/ {
+ compatible = "raspberrypi,model-b-plus", "brcm,bcm2835";
+ model = "Raspberry Pi Model B+";
+
+ leds {
+ act {
+ gpios = <&gpio 47 0>;
+ };
+
+ pwr {
+ label = "PWR";
+ gpios = <&gpio 35 0>;
+ default-state = "keep";
+ linux,default-trigger = "default-on";
+ };
+ };
+};
+
+&gpio {
+ pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>;
+
+ /* I2S interface */
+ i2s_alt0: i2s_alt0 {
+ brcm,pins = <18 19 20 21>;
+ brcm,function = <4>; /* alt0 */
+ };
+};
/dts-v1/;
-/include/ "bcm2835.dtsi"
+/include/ "bcm2835-rpi.dtsi"
/ {
compatible = "raspberrypi,model-b", "brcm,bcm2835";
model = "Raspberry Pi Model B";
- memory {
- reg = <0 0x10000000>;
- };
-
leds {
- compatible = "gpio-leds";
-
act {
- label = "ACT";
gpios = <&gpio 16 1>;
- default-state = "keep";
- linux,default-trigger = "heartbeat";
};
};
};
&gpio {
- pinctrl-names = "default";
- pinctrl-0 = <&gpioout &alt0 &alt2 &alt3>;
-
- gpioout: gpioout {
- brcm,pins = <6>;
- brcm,function = <1>; /* GPIO out */
- };
-
- alt0: alt0 {
- brcm,pins = <0 1 2 3 4 5 7 8 9 10 11 14 15 40 45>;
- brcm,function = <4>; /* alt0 */
- };
-
- alt3: alt3 {
- brcm,pins = <48 49 50 51 52 53>;
- brcm,function = <7>; /* alt3 */
- };
+ pinctrl-0 = <&gpioout &alt0 &i2s_alt2 &alt3>;
/* I2S interface */
- alt2: alt2 {
+ i2s_alt2: i2s_alt2 {
brcm,pins = <28 29 30 31>;
brcm,function = <6>; /* alt2 */
};
};
-
-&i2c0 {
- status = "okay";
- clock-frequency = <100000>;
-};
-
-&i2c1 {
- status = "okay";
- clock-frequency = <100000>;
-};
-
-&sdhci {
- status = "okay";
- bus-width = <4>;
-};
--- /dev/null
+/include/ "bcm2835.dtsi"
+
+/ {
+ memory {
+ reg = <0 0x10000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ act {
+ label = "ACT";
+ default-state = "keep";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&gpio {
+ pinctrl-names = "default";
+
+ gpioout: gpioout {
+ brcm,pins = <6>;
+ brcm,function = <1>; /* GPIO out */
+ };
+
+ alt0: alt0 {
+ brcm,pins = <0 1 2 3 4 5 7 8 9 10 11 14 15 40 45>;
+ brcm,function = <4>; /* alt0 */
+ };
+
+ alt3: alt3 {
+ brcm,pins = <48 49 50 51 52 53>;
+ brcm,function = <7>; /* alt3 */
+ };
+};
+
+&i2c0 {
+ status = "okay";
+ clock-frequency = <100000>;
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <100000>;
+};
+
+&sdhci {
+ status = "okay";
+ bus-width = <4>;
+};
--- /dev/null
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WZR-1750DHP
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+ compatible = "buffalo,wzr-1750dhp", "brcm,bcm4708";
+ model = "Buffalo WZR-1750DHP (BCM4708)";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <200>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+
+ aoss {
+ label = "AOSS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
+ };
+
+ /* Commit mode set by switch? */
+ mode {
+ label = "Mode";
+ linux,code = <KEY_SETUP>;
+ gpios = <&chipcommon 13 GPIO_ACTIVE_LOW>;
+ };
+
+ /* Switch: AP mode */
+ sw_ap {
+ label = "AP";
+ linux,code = <BTN_0>;
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ };
+
+ eject {
+ label = "USB eject";
+ linux,code = <KEY_EJECTCD>;
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
status = "okay";
};
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ logo {
+ label = "bcm53xx:white:logo";
+ gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ power0 {
+ label = "bcm53xx:green:power";
+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ power1 {
+ label = "bcm53xx:amber:power";
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ usb {
+ label = "bcm53xx:blue:usb";
+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ wireless {
+ label = "bcm53xx:blue:wireless";
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <200>;
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+ };
+
+ rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+ };
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+ };
+ };
};
--- /dev/null
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Netgear R6300 V2
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+
+/ {
+ compatible = "netgear,r6300v2", "brcm,bcm4708";
+ model = "Netgear R6300 V2 (BCM4708)";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ logo {
+ label = "bcm53xx:white:logo";
+ gpios = <&chipcommon 1 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ power0 {
+ label = "bcm53xx:green:power";
+ gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ power1 {
+ label = "bcm53xx:amber:power";
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ usb {
+ label = "bcm53xx:blue:usb";
+ gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ wireless {
+ label = "bcm53xx:blue:wireless";
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <200>;
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 4 GPIO_ACTIVE_LOW>;
+ };
+
+ rfkill {
+ label = "WiFi";
+ linux,code = <KEY_RFKILL>;
+ gpios = <&chipcommon 5 GPIO_ACTIVE_LOW>;
+ };
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Asus RT-N18U
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+ compatible = "asus,rt-n18u", "brcm,bcm47081", "brcm,bcm4708";
+ model = "Asus RT-N18U (BCM47081)";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power {
+ label = "bcm53xx:blue:power";
+ gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ usb2 {
+ label = "bcm53xx:blue:usb2";
+ gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+
+ wan {
+ label = "bcm53xx:blue:wan";
+ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ lan {
+ label = "bcm53xx:blue:lan";
+ gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-on";
+ };
+
+ usb3 {
+ label = "bcm53xx:blue:usb3";
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "default-off";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <200>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for Buffalo WZR-600DHP2
+ *
+ * Copyright (C) 2014 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+/dts-v1/;
+
+#include "bcm47081.dtsi"
+
+/ {
+ compatible = "buffalo,wzr-600dhp2", "brcm,bcm47081", "brcm,bcm4708";
+ model = "Buffalo WZR-600DHP2 (BCM47081)";
+
+ chosen {
+ bootargs = "console=ttyS0,115200";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <200>;
+
+ aoss {
+ label = "AOSS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+ };
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+ };
+
+ /* Switch device mode? */
+ mode {
+ label = "Mode";
+ linux,code = <KEY_SETUP>;
+ gpios = <&chipcommon 14 GPIO_ACTIVE_LOW>;
+ };
+
+ eject {
+ label = "USB eject";
+ linux,code = <KEY_EJECTCD>;
+ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Broadcom BCM470X / BCM5301X ARM platform code.
+ * DTS for BCM47081 SoC.
+ *
+ * Copyright © 2014 Rafał Miłecki <zajec5@gmail.com>
+ *
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
+#include "bcm5301x.dtsi"
+
+/ {
+ compatible = "brcm,bcm47081";
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ reg = <0x0>;
+ };
+ };
+};
* Licensed under the GNU/GPL. See COPYING for details.
*/
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "skeleton.dtsi"
clock-frequency = <400000000>;
};
};
+
+ axi@18000000 {
+ compatible = "brcm,bus-axi";
+ reg = <0x18000000 0x1000>;
+ ranges = <0x00000000 0x18000000 0x00100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x000fffff 0xffff>;
+ interrupt-map =
+ /* ChipCommon */
+ <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* USB 2.0 Controller */
+ <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* USB 3.0 Controller */
+ <0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* Ethernet Controller 0 */
+ <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* Ethernet Controller 1 */
+ <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* Ethernet Controller 2 */
+ <0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* Ethernet Controller 3 */
+ <0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* NAND Controller */
+ <0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+
+ chipcommon: chipcommon@0 {
+ reg = <0x00000000 0x1000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
};
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2014 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+
+/ {
+ model = "Cygnus Enterprise Phone (BCM911360_ENTPHN)";
+ compatible = "brcm,bcm11360", "brcm,cygnus";
+
+ aliases {
+ serial0 = &uart3;
+ };
+
+ chosen {
+ stdout-path = &uart3;
+ bootargs = "console=ttyS0,115200";
+ };
+
+ uart3: serial@18023000 {
+ status = "okay";
+ };
+};
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2014 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+
+/ {
+ model = "Cygnus SVK (BCM911360K)";
+ compatible = "brcm,bcm11360", "brcm,cygnus";
+
+ aliases {
+ serial0 = &uart3;
+ };
+
+ chosen {
+ stdout-path = &uart3;
+ bootargs = "console=ttyS0,115200";
+ };
+
+ uart3: serial@18023000 {
+ status = "okay";
+ };
+};
--- /dev/null
+/*
+ * BSD LICENSE
+ *
+ * Copyright(c) 2014 Broadcom Corporation. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ *
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in
+ * the documentation and/or other materials provided with the
+ * distribution.
+ * * Neither the name of Broadcom Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+
+#include "bcm-cygnus.dtsi"
+
+/ {
+ model = "Cygnus SVK (BCM958300K)";
+ compatible = "brcm,bcm58300", "brcm,cygnus";
+
+ aliases {
+ serial0 = &uart3;
+ };
+
+ chosen {
+ stdout-path = &uart3;
+ bootargs = "console=ttyS0,115200";
+ };
+
+ uart3: serial@18023000 {
+ status = "okay";
+ };
+};
};
};
+&ahci { status = "okay"; };
+
+ð1 { status = "okay"; };
+
+/* Unpopulated SATA plug on solder side */
+&sata0 { status = "okay"; };
+
+&sata_phy { status = "okay"; };
+
+/* Samsung M8G2FA 8GB eMMC */
+&sdhci2 {
+ non-removable;
+ bus-width = <8>;
+ status = "okay";
+};
+
&uart0 { status = "okay"; };
ranges = <0 0xf7000000 0x1000000>;
+ sdhci0: sdhci@ab0000 {
+ compatible = "mrvl,pxav3-mmc";
+ reg = <0xab0000 0x200>;
+ clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>;
+ clock-names = "io", "core";
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ sdhci1: sdhci@ab0800 {
+ compatible = "mrvl,pxav3-mmc";
+ reg = <0xab0800 0x200>;
+ clocks = <&chip CLKID_SDIO1XIN>, <&chip CLKID_SDIO1>;
+ clock-names = "io", "core";
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ sdhci2: sdhci@ab1000 {
+ compatible = "mrvl,pxav3-mmc";
+ reg = <0xab1000 0x200>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&chip CLKID_NFC_ECC>, <&chip CLKID_NFC>;
+ clock-names = "io", "core";
+ pinctrl-0 = <&emmc_pmux>;
+ pinctrl-names = "default";
+ status = "disabled";
+ };
+
l2: l2-cache-controller@ac0000 {
compatible = "marvell,tauros3-cache", "arm,pl310-cache";
reg = <0xac0000 0x1000>;
clocks = <&chip CLKID_TWD>;
};
+ eth1: ethernet@b90000 {
+ compatible = "marvell,pxa168-eth";
+ reg = <0xb90000 0x10000>;
+ clocks = <&chip CLKID_GETH1>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ /* set by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy-connection-type = "mii";
+ phy-handle = <ðphy1>;
+ status = "disabled";
+
+ ethphy1: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+
cpu-ctrl@dd0000 {
compatible = "marvell,berlin-cpu-ctrl";
reg = <0xdd0000 0x10000>;
};
+ eth0: ethernet@e50000 {
+ compatible = "marvell,pxa168-eth";
+ reg = <0xe50000 0x10000>;
+ clocks = <&chip CLKID_GETH0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ /* set by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy-connection-type = "mii";
+ phy-handle = <ðphy0>;
+ status = "disabled";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+
apb@e80000 {
compatible = "simple-bus";
#address-cells = <1>;
};
};
+ ahci: sata@e90000 {
+ compatible = "marvell,berlin2-ahci", "generic-ahci";
+ reg = <0xe90000 0x1000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&chip CLKID_SATA>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sata0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata_phy 0>;
+ status = "disabled";
+ };
+
+ sata1: sata-port@1 {
+ reg = <1>;
+ phys = <&sata_phy 1>;
+ status = "disabled";
+ };
+ };
+
+ sata_phy: phy@e900a0 {
+ compatible = "marvell,berlin2-sata-phy";
+ reg = <0xe900a0 0x200>;
+ clocks = <&chip CLKID_SATA>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #phy-cells = <1>;
+ status = "disabled";
+
+ sata-phy@0 {
+ reg = <0>;
+ };
+
+ sata-phy@1 {
+ reg = <1>;
+ };
+ };
+
chip: chip-control@ea0000 {
compatible = "marvell,berlin2-chip-ctrl";
#clock-cells = <1>;
+ #reset-cells = <2>;
reg = <0xea0000 0x400>;
clocks = <&refclk>;
clock-names = "refclk";
+
+ emmc_pmux: emmc-pmux {
+ groups = "G26";
+ function = "emmc";
+ };
};
apb@fc0000 {
/dts-v1/;
#include "berlin2cd.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Google Chromecast";
device_type = "memory";
reg = <0x00000000 0x20000000>; /* 512 MB */
};
+
+ leds {
+ compatible = "gpio-leds";
+
+ white {
+ label = "white";
+ gpios = <&portc 1 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+
+ red {
+ label = "red";
+ gpios = <&portc 2 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ };
+};
+
+/*
+ * AzureWave AW-NH387 (Marvell 88W8787)
+ * 802.11b/g/n + Bluetooth 2.1
+ */
+&sdhci0 {
+ non-removable;
+ status = "okay";
};
&uart0 { status = "okay"; };
+
+&usb_phy1 { status = "okay"; };
+
+&usb1 { status = "okay"; };
ranges = <0 0xf7000000 0x1000000>;
+ sdhci0: sdhci@ab0000 {
+ compatible = "mrvl,pxav3-mmc";
+ reg = <0xab0000 0x200>;
+ clocks = <&chip CLKID_SDIO0XIN>, <&chip CLKID_SDIO0>;
+ clock-names = "io", "core";
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
l2: l2-cache-controller@ac0000 {
compatible = "arm,pl310-cache";
reg = <0xac0000 0x1000>;
clocks = <&chip CLKID_TWD>;
};
+ usb_phy0: usb-phy@b74000 {
+ compatible = "marvell,berlin2cd-usb-phy";
+ reg = <0xb74000 0x128>;
+ #phy-cells = <0>;
+ resets = <&chip 0x178 23>;
+ status = "disabled";
+ };
+
+ usb_phy1: usb-phy@b78000 {
+ compatible = "marvell,berlin2cd-usb-phy";
+ reg = <0xb78000 0x128>;
+ #phy-cells = <0>;
+ resets = <&chip 0x178 24>;
+ status = "disabled";
+ };
+
+ eth1: ethernet@b90000 {
+ compatible = "marvell,pxa168-eth";
+ reg = <0xb90000 0x10000>;
+ clocks = <&chip CLKID_GETH1>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ /* set by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy-connection-type = "mii";
+ phy-handle = <ðphy1>;
+ status = "disabled";
+
+ ethphy1: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+
+ eth0: ethernet@e50000 {
+ compatible = "marvell,pxa168-eth";
+ reg = <0xe50000 0x10000>;
+ clocks = <&chip CLKID_GETH0>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+ /* set by bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy-connection-type = "mii";
+ phy-handle = <ðphy0>;
+ status = "disabled";
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+
apb@e80000 {
compatible = "simple-bus";
#address-cells = <1>;
chip: chip-control@ea0000 {
compatible = "marvell,berlin2cd-chip-ctrl";
#clock-cells = <1>;
+ #reset-cells = <2>;
reg = <0xea0000 0x400>;
clocks = <&refclk>;
clock-names = "refclk";
};
};
+ usb0: usb@ed0000 {
+ compatible = "chipidea,usb2";
+ reg = <0xed0000 0x200>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&chip CLKID_USB0>;
+ phys = <&usb_phy0>;
+ phy-names = "usb-phy";
+ status = "disabled";
+ };
+
+ usb1: usb@ee0000 {
+ compatible = "chipidea,usb2";
+ reg = <0xee0000 0x200>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&chip CLKID_USB1>;
+ phys = <&usb_phy1>;
+ phy-names = "usb-phy";
+ status = "disabled";
+ };
+
apb@fc0000 {
compatible = "simple-bus";
#address-cells = <1>;
*/
/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
#include "berlin2q.dtsi"
/ {
choosen {
bootargs = "console=ttyS0,115200 earlyprintk";
};
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_usb0_vbus: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb0_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&portb 8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb1_vbus: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&portb 10 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb2_vbus: regulator@2 {
+ compatible = "regulator-fixed";
+ regulator-name = "usb2_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&portb 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+ };
};
&sdhci1 {
status = "okay";
};
+&usb_phy0 {
+ status = "okay";
+};
+
+&usb_phy2 {
+ status = "okay";
+};
+
+&usb0 {
+ vbus-supply = <®_usb0_vbus>;
+ status = "okay";
+};
+
+&usb2 {
+ vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+};
+
ð0 {
status = "okay";
};
+
+&sata0 {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+};
#interrupt-cells = <3>;
};
+ usb_phy2: phy@a2f400 {
+ compatible = "marvell,berlin2-usb-phy";
+ reg = <0xa2f400 0x128>;
+ #phy-cells = <0>;
+ resets = <&chip 0x104 14>;
+ status = "disabled";
+ };
+
+ usb2: usb@a30000 {
+ compatible = "chipidea,usb2";
+ reg = <0xa30000 0x10000>;
+ interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&chip CLKID_USB2>;
+ phys = <&usb_phy2>;
+ phy-names = "usb-phy";
+ status = "disabled";
+ };
+
+ usb_phy0: phy@b74000 {
+ compatible = "marvell,berlin2-usb-phy";
+ reg = <0xb74000 0x128>;
+ #phy-cells = <0>;
+ resets = <&chip 0x104 12>;
+ status = "disabled";
+ };
+
+ usb_phy1: phy@b78000 {
+ compatible = "marvell,berlin2-usb-phy";
+ reg = <0xb78000 0x128>;
+ #phy-cells = <0>;
+ resets = <&chip 0x104 13>;
+ status = "disabled";
+ };
+
eth0: ethernet@b90000 {
compatible = "marvell,pxa168-eth";
reg = <0xb90000 0x10000>;
local-mac-address = [00 00 00 00 00 00];
#address-cells = <1>;
#size-cells = <0>;
+ phy-connection-type = "mii";
phy-handle = <ðphy0>;
status = "disabled";
reg = <0x2c14 0x14>;
clocks = <&chip CLKID_CFG>;
clock-names = "timer";
- status = "disabled";
};
timer2: timer@2c28 {
chip: chip-control@ea0000 {
compatible = "marvell,berlin2q-chip-ctrl";
#clock-cells = <1>;
+ #reset-cells = <2>;
reg = <0xea0000 0x400>, <0xdd0170 0x10>;
clocks = <&refclk>;
clock-names = "refclk";
};
};
+ ahci: sata@e90000 {
+ compatible = "marvell,berlin2q-ahci", "generic-ahci";
+ reg = <0xe90000 0x1000>;
+ interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&chip CLKID_SATA>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sata0: sata-port@0 {
+ reg = <0>;
+ phys = <&sata_phy 0>;
+ status = "disabled";
+ };
+
+ sata1: sata-port@1 {
+ reg = <1>;
+ phys = <&sata_phy 1>;
+ status = "disabled";
+ };
+ };
+
+ sata_phy: phy@e900a0 {
+ compatible = "marvell,berlin2q-sata-phy";
+ reg = <0xe900a0 0x200>;
+ clocks = <&chip CLKID_SATA>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #phy-cells = <1>;
+ status = "disabled";
+
+ sata-phy@0 {
+ reg = <0>;
+ };
+
+ sata-phy@1 {
+ reg = <1>;
+ };
+ };
+
+ usb0: usb@ed0000 {
+ compatible = "chipidea,usb2";
+ reg = <0xed0000 0x10000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&chip CLKID_USB0>;
+ phys = <&usb_phy0>;
+ phy-names = "usb-phy";
+ status = "disabled";
+ };
+
+ usb1: usb@ee0000 {
+ compatible = "chipidea,usb2";
+ reg = <0xee0000 0x10000>;
+ interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&chip CLKID_USB1>;
+ phys = <&usb_phy1>;
+ phy-names = "usb-phy";
+ status = "disabled";
+ };
+
apb@fc0000 {
compatible = "simple-bus";
#address-cells = <1>;
0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_be0n_cle */
>;
};
+
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ 0x250 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txc.rgmii0_txc */
+ 0x254 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txctl.rgmii0_txctl */
+ 0x258 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_td3.rgmii0_txd3 */
+ 0x25c (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd2.rgmii0_txd2 */
+ 0x260 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd1.rgmii0_txd1 */
+ 0x264 (PIN_OUTPUT | MUX_MODE0) /* rgmii0_txd0.rgmii0_txd0 */
+ 0x268 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxc.rgmii0_rxc */
+ 0x26c (PIN_INPUT | MUX_MODE0) /* rgmii0_rxctl.rgmii0_rxctl */
+ 0x270 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd3.rgmii0_rxd3 */
+ 0x274 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd2.rgmii0_rxd2 */
+ 0x278 (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd1.rgmii0_rxd1 */
+ 0x27c (PIN_INPUT | MUX_MODE0) /* rgmii0_rxd0.rgmii0_rxd0 */
+
+ /* Slave 2 */
+ 0x198 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */
+ 0x19c (PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
+ 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
+ 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
+ 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
+ 0x1ac (PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
+ 0x1b0 (PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
+ 0x1b4 (PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
+ 0x1b8 (PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
+ 0x1bc (PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
+ 0x1c0 (PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
+ 0x1c4 (PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
+ >;
+
+ };
+
+ cpsw_sleep: cpsw_sleep {
+ pinctrl-single,pins = <
+ /* Slave 1 */
+ 0x250 (MUX_MODE15)
+ 0x254 (MUX_MODE15)
+ 0x258 (MUX_MODE15)
+ 0x25c (MUX_MODE15)
+ 0x260 (MUX_MODE15)
+ 0x264 (MUX_MODE15)
+ 0x268 (MUX_MODE15)
+ 0x26c (MUX_MODE15)
+ 0x270 (MUX_MODE15)
+ 0x274 (MUX_MODE15)
+ 0x278 (MUX_MODE15)
+ 0x27c (MUX_MODE15)
+
+ /* Slave 2 */
+ 0x198 (MUX_MODE15)
+ 0x19c (MUX_MODE15)
+ 0x1a0 (MUX_MODE15)
+ 0x1a4 (MUX_MODE15)
+ 0x1a8 (MUX_MODE15)
+ 0x1ac (MUX_MODE15)
+ 0x1b0 (MUX_MODE15)
+ 0x1b4 (MUX_MODE15)
+ 0x1b8 (MUX_MODE15)
+ 0x1bc (MUX_MODE15)
+ 0x1c0 (MUX_MODE15)
+ 0x1c4 (MUX_MODE15)
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */
+ 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+
+ davinci_mdio_sleep: davinci_mdio_sleep {
+ pinctrl-single,pins = <
+ 0x23c (MUX_MODE15)
+ 0x240 (MUX_MODE15)
+ >;
+ };
+
+ dcan1_pins_default: dcan1_pins_default {
+ pinctrl-single,pins = <
+ 0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
+ 0x3d4 (MUX_MODE15) /* dcan1_rx.off */
+ 0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
+ >;
+ };
+
+ dcan1_pins_sleep: dcan1_pins_sleep {
+ pinctrl-single,pins = <
+ 0x3d0 (MUX_MODE15) /* dcan1_tx.off */
+ 0x3d4 (MUX_MODE15) /* dcan1_rx.off */
+ 0x418 (MUX_MODE15) /* wakeup0.off */
+ >;
+ };
};
&i2c1 {
regulator-name = "smps45";
regulator-min-microvolt = < 850000>;
regulator-max-microvolt = <1150000>;
+ regulator-always-on;
regulator-boot-on;
};
regulator-name = "smps6";
regulator-min-microvolt = <850000>;
regulator-max-microvolt = <12500000>;
+ regulator-always-on;
regulator-boot-on;
};
regulator-name = "smps8";
regulator-min-microvolt = < 850000>;
regulator-max-microvolt = <1250000>;
+ regulator-always-on;
regulator-boot-on;
};
regulator-name = "ldo2";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
+ regulator-always-on;
regulator-boot-on;
};
regulator-name = "ldo9";
regulator-min-microvolt = <1050000>;
regulator-max-microvolt = <1050000>;
+ regulator-always-on;
regulator-boot-on;
};
ti,no-reset-on-init;
ti,no-idle-on-init;
};
+
+&mac {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+ dual_emac;
+};
+
+&cpsw_emac0 {
+ phy_id = <&davinci_mdio>, <2>;
+ phy-mode = "rgmii";
+ dual_emac_res_vlan = <1>;
+};
+
+&cpsw_emac1 {
+ phy_id = <&davinci_mdio>, <3>;
+ phy-mode = "rgmii";
+ dual_emac_res_vlan = <2>;
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+};
+
+&dcan1 {
+ status = "ok";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&dcan1_pins_default>;
+ pinctrl-1 = <&dcan1_pins_sleep>;
+};
serial3 = &uart4;
serial4 = &uart5;
serial5 = &uart6;
+ serial6 = &uart7;
+ serial7 = &uart8;
+ serial8 = &uart9;
+ serial9 = &uart10;
+ ethernet0 = &cpsw_emac0;
+ ethernet1 = &cpsw_emac1;
+ d_can0 = &dcan1;
+ d_can1 = &dcan2;
};
timer {
ti,hwmods = "counter_32k";
};
+ dra7_ctrl_core: ctrl_core@4a002000 {
+ compatible = "syscon";
+ reg = <0x4a002000 0x6d0>;
+ };
+
dra7_ctrl_general: tisyscon@4a002e00 {
compatible = "syscon";
reg = <0x4a002e00 0x7c>;
ti,hwmods = "uart1";
clock-frequency = <48000000>;
status = "disabled";
+ dmas = <&sdma 49>, <&sdma 50>;
+ dma-names = "tx", "rx";
};
uart2: serial@4806c000 {
ti,hwmods = "uart2";
clock-frequency = <48000000>;
status = "disabled";
+ dmas = <&sdma 51>, <&sdma 52>;
+ dma-names = "tx", "rx";
};
uart3: serial@48020000 {
ti,hwmods = "uart3";
clock-frequency = <48000000>;
status = "disabled";
+ dmas = <&sdma 53>, <&sdma 54>;
+ dma-names = "tx", "rx";
};
uart4: serial@4806e000 {
ti,hwmods = "uart4";
clock-frequency = <48000000>;
status = "disabled";
+ dmas = <&sdma 55>, <&sdma 56>;
+ dma-names = "tx", "rx";
};
uart5: serial@48066000 {
ti,hwmods = "uart5";
clock-frequency = <48000000>;
status = "disabled";
+ dmas = <&sdma 63>, <&sdma 64>;
+ dma-names = "tx", "rx";
};
uart6: serial@48068000 {
ti,hwmods = "uart6";
clock-frequency = <48000000>;
status = "disabled";
+ dmas = <&sdma 79>, <&sdma 80>;
+ dma-names = "tx", "rx";
};
uart7: serial@48420000 {
mailbox1: mailbox@4a0f4000 {
compatible = "ti,omap4-mailbox";
reg = <0x4a0f4000 0x200>;
+ interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox1";
+ #mbox-cells = <1>;
ti,mbox-num-users = <3>;
ti,mbox-num-fifos = <8>;
status = "disabled";
mailbox2: mailbox@4883a000 {
compatible = "ti,omap4-mailbox";
reg = <0x4883a000 0x200>;
+ interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox2";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
mailbox3: mailbox@4883c000 {
compatible = "ti,omap4-mailbox";
reg = <0x4883c000 0x200>;
+ interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox3";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
mailbox4: mailbox@4883e000 {
compatible = "ti,omap4-mailbox";
reg = <0x4883e000 0x200>;
+ interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox4";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
mailbox5: mailbox@48840000 {
compatible = "ti,omap4-mailbox";
reg = <0x48840000 0x200>;
+ interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox5";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
mailbox6: mailbox@48842000 {
compatible = "ti,omap4-mailbox";
reg = <0x48842000 0x200>;
+ interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox6";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
mailbox7: mailbox@48844000 {
compatible = "ti,omap4-mailbox";
reg = <0x48844000 0x200>;
+ interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox7";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
mailbox8: mailbox@48846000 {
compatible = "ti,omap4-mailbox";
reg = <0x48846000 0x200>;
+ interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox8";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
mailbox9: mailbox@4885e000 {
compatible = "ti,omap4-mailbox";
reg = <0x4885e000 0x200>;
+ interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox9";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
mailbox10: mailbox@48860000 {
compatible = "ti,omap4-mailbox";
reg = <0x48860000 0x200>;
+ interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox10";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
mailbox11: mailbox@48862000 {
compatible = "ti,omap4-mailbox";
reg = <0x48862000 0x200>;
+ interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox11";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
mailbox12: mailbox@48864000 {
compatible = "ti,omap4-mailbox";
reg = <0x48864000 0x200>;
+ interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox12";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
mailbox13: mailbox@48802000 {
compatible = "ti,omap4-mailbox";
reg = <0x48802000 0x200>;
+ interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox13";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <12>;
status = "disabled";
status = "disabled";
};
+ rtc@48838000 {
+ compatible = "ti,am3352-rtc";
+ reg = <0x48838000 0x100>;
+ interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
+ ti,hwmods = "rtcss";
+ clocks = <&sys_32k_ck>;
+ };
+
omap_control_usb2phy1: control-phy@4a002300 {
compatible = "ti,control-phy-usb2";
reg = <0x4a002300 0x4>;
};
};
- omap_dwc3_1@48880000 {
+ omap_dwc3_1: omap_dwc3_1@48880000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss1";
reg = <0x48880000 0x10000>;
};
};
- omap_dwc3_2@488c0000 {
+ omap_dwc3_2: omap_dwc3_2@488c0000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss2";
reg = <0x488c0000 0x10000>;
};
/* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
- omap_dwc3_3@48900000 {
+ omap_dwc3_3: omap_dwc3_3@48900000 {
compatible = "ti,dwc3";
ti,hwmods = "usb_otg_ss3";
reg = <0x48900000 0x10000>;
};
};
- omap_dwc3_4@48940000 {
- compatible = "ti,dwc3";
- ti,hwmods = "usb_otg_ss4";
- reg = <0x48940000 0x10000>;
- interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
- #address-cells = <1>;
- #size-cells = <1>;
- utmi-mode = <2>;
- ranges;
- status = "disabled";
- usb4: usb@48950000 {
- compatible = "snps,dwc3";
- reg = <0x48950000 0x17000>;
- interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
- tx-fifo-resize;
- maximum-speed = "high-speed";
- dr_mode = "otg";
- };
- };
-
elm: elm@48078000 {
compatible = "ti,am3352-elm";
reg = <0x48078000 0xfc0>; /* device IO registers */
ti,irqs-skip = <10 133 139 140>;
ti,irqs-safe-map = <0>;
};
+
+ mac: ethernet@4a100000 {
+ compatible = "ti,cpsw";
+ ti,hwmods = "gmac";
+ clocks = <&dpll_gmac_ck>, <&gmac_gmii_ref_clk_div>;
+ clock-names = "fck", "cpts";
+ cpdma_channels = <8>;
+ ale_entries = <1024>;
+ bd_ram_size = <0x2000>;
+ no_bd_ram = <0>;
+ rx_descs = <64>;
+ mac_control = <0x20>;
+ slaves = <2>;
+ active_slave = <0>;
+ cpts_clock_mult = <0x80000000>;
+ cpts_clock_shift = <29>;
+ reg = <0x48484000 0x1000
+ 0x48485200 0x2E00>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /*
+ * rx_thresh_pend
+ * rx_pend
+ * tx_pend
+ * misc_pend
+ */
+ interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
+ ranges;
+ status = "disabled";
+
+ davinci_mdio: mdio@48485000 {
+ compatible = "ti,davinci_mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ti,hwmods = "davinci_mdio";
+ bus_freq = <1000000>;
+ reg = <0x48485000 0x100>;
+ };
+
+ cpsw_emac0: slave@48480200 {
+ /* Filled in by U-Boot */
+ mac-address = [ 00 00 00 00 00 00 ];
+ };
+
+ cpsw_emac1: slave@48480300 {
+ /* Filled in by U-Boot */
+ mac-address = [ 00 00 00 00 00 00 ];
+ };
+
+ phy_sel: cpsw-phy-sel@4a002554 {
+ compatible = "ti,dra7xx-cpsw-phy-sel";
+ reg= <0x4a002554 0x4>;
+ reg-names = "gmii-sel";
+ };
+ };
+
+ dcan1: can@481cc000 {
+ compatible = "ti,dra7-d_can";
+ ti,hwmods = "dcan1";
+ reg = <0x4ae3c000 0x2000>;
+ syscon-raminit = <&dra7_ctrl_core 0x558 0>;
+ interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&dcan1_sys_clk_mux>;
+ status = "disabled";
+ };
+
+ dcan2: can@481d0000 {
+ compatible = "ti,dra7-d_can";
+ ti,hwmods = "dcan2";
+ reg = <0x48480000 0x2000>;
+ syscon-raminit = <&dra7_ctrl_core 0x558 1>;
+ interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sys_clkin1>;
+ status = "disabled";
+ };
};
};
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1024 MB */
};
+
+ evm_3v3: fixedregulator-evm_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "evm_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
};
&dra7_pmx_core {
0x404 (PIN_INPUT | MUX_MODE0) /* i2c1_scl.i2c1_scl */
>;
};
+
+ nand_default: nand_default {
+ pinctrl-single,pins = <
+ 0x0 (PIN_INPUT | MUX_MODE0) /* gpmc_ad0 */
+ 0x4 (PIN_INPUT | MUX_MODE0) /* gpmc_ad1 */
+ 0x8 (PIN_INPUT | MUX_MODE0) /* gpmc_ad2 */
+ 0xc (PIN_INPUT | MUX_MODE0) /* gpmc_ad3 */
+ 0x10 (PIN_INPUT | MUX_MODE0) /* gpmc_ad4 */
+ 0x14 (PIN_INPUT | MUX_MODE0) /* gpmc_ad5 */
+ 0x18 (PIN_INPUT | MUX_MODE0) /* gpmc_ad6 */
+ 0x1c (PIN_INPUT | MUX_MODE0) /* gpmc_ad7 */
+ 0x20 (PIN_INPUT | MUX_MODE0) /* gpmc_ad8 */
+ 0x24 (PIN_INPUT | MUX_MODE0) /* gpmc_ad9 */
+ 0x28 (PIN_INPUT | MUX_MODE0) /* gpmc_ad10 */
+ 0x2c (PIN_INPUT | MUX_MODE0) /* gpmc_ad11 */
+ 0x30 (PIN_INPUT | MUX_MODE0) /* gpmc_ad12 */
+ 0x34 (PIN_INPUT | MUX_MODE0) /* gpmc_ad13 */
+ 0x38 (PIN_INPUT | MUX_MODE0) /* gpmc_ad14 */
+ 0x3c (PIN_INPUT | MUX_MODE0) /* gpmc_ad15 */
+ 0xb4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_cs0 */
+ 0xc4 (PIN_OUTPUT | MUX_MODE0) /* gpmc_advn_ale */
+ 0xcc (PIN_OUTPUT | MUX_MODE0) /* gpmc_wen */
+ 0xc8 (PIN_OUTPUT | MUX_MODE0) /* gpmc_oen_ren */
+ 0xd0 (PIN_OUTPUT | MUX_MODE0) /* gpmc_ben0 */
+ 0xd8 (PIN_INPUT | MUX_MODE0) /* gpmc_wait0 */
+ >;
+ };
+
+ usb1_pins: pinmux_usb1_pins {
+ pinctrl-single,pins = <
+ 0x280 (PIN_INPUT_SLEW | MUX_MODE0) /* usb1_drvvbus */
+ >;
+ };
+
+ usb2_pins: pinmux_usb2_pins {
+ pinctrl-single,pins = <
+ 0x284 (PIN_INPUT_SLEW | MUX_MODE0) /* usb2_drvvbus */
+ >;
+ };
+
+ tps65917_pins_default: tps65917_pins_default {
+ pinctrl-single,pins = <
+ 0x424 (PIN_INPUT_PULLUP | MUX_MODE1) /* wakeup3.sys_nirq1 */
+ >;
+ };
+
+ mmc1_pins_default: mmc1_pins_default {
+ pinctrl-single,pins = <
+ 0x36c (PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
+ 0x354 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
+ 0x358 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
+ 0x35c (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
+ 0x360 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
+ 0x364 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
+ 0x368 (PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
+ >;
+ };
+
+ mmc2_pins_default: mmc2_pins_default {
+ pinctrl-single,pins = <
+ 0x9c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
+ 0xb0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
+ 0xa0 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
+ 0xa4 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
+ 0xa8 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
+ 0xac (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
+ 0x8c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
+ 0x90 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
+ 0x94 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
+ 0x98 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
+ >;
+ };
+
+ dcan1_pins_default: dcan1_pins_default {
+ pinctrl-single,pins = <
+ 0x3d0 (PIN_OUTPUT | MUX_MODE0) /* dcan1_tx */
+ 0x3d4 (MUX_MODE15) /* dcan1_rx.off */
+ 0x418 (PULL_DIS | MUX_MODE1) /* wakeup0.dcan1_rx */
+ >;
+ };
+
+ dcan1_pins_sleep: dcan1_pins_sleep {
+ pinctrl-single,pins = <
+ 0x3d0 (MUX_MODE15) /* dcan1_tx.off */
+ 0x3d4 (MUX_MODE15) /* dcan1_rx.off */
+ 0x418 (MUX_MODE15) /* wakeup0.off */
+ >;
+ };
};
&i2c1 {
compatible = "ti,tps65917";
reg = <0x58>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&tps65917_pins_default>;
+
interrupts = <GIC_SPI 2 IRQ_TYPE_NONE>; /* IRQ_SYS_1N */
interrupt-parent = <&gic>;
interrupt-controller;
};
};
};
+
+ tps65917_power_button {
+ compatible = "ti,palmas-pwrbutton";
+ interrupt-parent = <&tps65917>;
+ interrupts = <1 IRQ_TYPE_NONE>;
+ wakeup-source;
+ ti,palmas-long-press-seconds = <6>;
+ };
};
};
&uart1 {
status = "okay";
};
+
+&elm {
+ status = "okay";
+};
+
+&gpmc {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&nand_default>;
+ ranges = <0 0 0 0x01000000>; /* minimum GPMC partition = 16MB */
+ nand@0,0 {
+ /* To use NAND, DIP switch SW5 must be set like so:
+ * SW5.1 (NAND_SELn) = ON (LOW)
+ * SW5.9 (GPMC_WPN) = OFF (HIGH)
+ */
+ reg = <0 0 4>; /* device IO registers */
+ ti,nand-ecc-opt = "bch8";
+ ti,elm-id = <&elm>;
+ nand-bus-width = <16>;
+ gpmc,device-width = <2>;
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <80>;
+ gpmc,cs-wr-off-ns = <80>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <60>;
+ gpmc,adv-wr-off-ns = <60>;
+ gpmc,we-on-ns = <10>;
+ gpmc,we-off-ns = <50>;
+ gpmc,oe-on-ns = <4>;
+ gpmc,oe-off-ns = <40>;
+ gpmc,access-ns = <40>;
+ gpmc,wr-access-ns = <80>;
+ gpmc,rd-cycle-ns = <80>;
+ gpmc,wr-cycle-ns = <80>;
+ gpmc,bus-turnaround-ns = <0>;
+ gpmc,cycle2cycle-delay-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ /* MTD partition table */
+ /* All SPL-* partitions are sized to minimal length
+ * which can be independently programmable. For
+ * NAND flash this is equal to size of erase-block */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ partition@0 {
+ label = "NAND.SPL";
+ reg = <0x00000000 0x000020000>;
+ };
+ partition@1 {
+ label = "NAND.SPL.backup1";
+ reg = <0x00020000 0x00020000>;
+ };
+ partition@2 {
+ label = "NAND.SPL.backup2";
+ reg = <0x00040000 0x00020000>;
+ };
+ partition@3 {
+ label = "NAND.SPL.backup3";
+ reg = <0x00060000 0x00020000>;
+ };
+ partition@4 {
+ label = "NAND.u-boot-spl-os";
+ reg = <0x00080000 0x00040000>;
+ };
+ partition@5 {
+ label = "NAND.u-boot";
+ reg = <0x000c0000 0x00100000>;
+ };
+ partition@6 {
+ label = "NAND.u-boot-env";
+ reg = <0x001c0000 0x00020000>;
+ };
+ partition@7 {
+ label = "NAND.u-boot-env.backup1";
+ reg = <0x001e0000 0x00020000>;
+ };
+ partition@8 {
+ label = "NAND.kernel";
+ reg = <0x00200000 0x00800000>;
+ };
+ partition@9 {
+ label = "NAND.file-system";
+ reg = <0x00a00000 0x0f600000>;
+ };
+ };
+};
+
+&usb2_phy1 {
+ phy-supply = <&ldo4_reg>;
+};
+
+&usb2_phy2 {
+ phy-supply = <&ldo4_reg>;
+};
+
+&usb1 {
+ dr_mode = "peripheral";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_pins>;
+};
+
+&usb2 {
+ dr_mode = "host";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb2_pins>;
+};
+
+&mmc1 {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc1_pins_default>;
+
+ vmmc-supply = <&ldo1_reg>;
+ bus-width = <4>;
+ /*
+ * SDCD signal is not being used here - using the fact that GPIO mode
+ * is a viable alternative
+ */
+ cd-gpios = <&gpio6 27 0>;
+};
+
+&mmc2 {
+ /* SW5-3 in ON position */
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_default>;
+
+ vmmc-supply = <&evm_3v3>;
+ bus-width = <8>;
+ ti,non-removable;
+};
+
+&dra7_pmx_core {
+ cpsw_default: cpsw_default {
+ pinctrl-single,pins = <
+ /* Slave 2 */
+ 0x198 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d12.rgmii1_txc */
+ 0x19c (PIN_OUTPUT | MUX_MODE3) /* vin2a_d13.rgmii1_tctl */
+ 0x1a0 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d14.rgmii1_td3 */
+ 0x1a4 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d15.rgmii1_td2 */
+ 0x1a8 (PIN_OUTPUT | MUX_MODE3) /* vin2a_d16.rgmii1_td1 */
+ 0x1ac (PIN_OUTPUT | MUX_MODE3) /* vin2a_d17.rgmii1_td0 */
+ 0x1b0 (PIN_INPUT | MUX_MODE3) /* vin2a_d18.rgmii1_rclk */
+ 0x1b4 (PIN_INPUT | MUX_MODE3) /* vin2a_d19.rgmii1_rctl */
+ 0x1b8 (PIN_INPUT | MUX_MODE3) /* vin2a_d20.rgmii1_rd3 */
+ 0x1bc (PIN_INPUT | MUX_MODE3) /* vin2a_d21.rgmii1_rd2 */
+ 0x1c0 (PIN_INPUT | MUX_MODE3) /* vin2a_d22.rgmii1_rd1 */
+ 0x1c4 (PIN_INPUT | MUX_MODE3) /* vin2a_d23.rgmii1_rd0 */
+ >;
+
+ };
+
+ cpsw_sleep: cpsw_sleep {
+ pinctrl-single,pins = <
+ /* Slave 2 */
+ 0x198 (MUX_MODE15)
+ 0x19c (MUX_MODE15)
+ 0x1a0 (MUX_MODE15)
+ 0x1a4 (MUX_MODE15)
+ 0x1a8 (MUX_MODE15)
+ 0x1ac (MUX_MODE15)
+ 0x1b0 (MUX_MODE15)
+ 0x1b4 (MUX_MODE15)
+ 0x1b8 (MUX_MODE15)
+ 0x1bc (MUX_MODE15)
+ 0x1c0 (MUX_MODE15)
+ 0x1c4 (MUX_MODE15)
+ >;
+ };
+
+ davinci_mdio_default: davinci_mdio_default {
+ pinctrl-single,pins = <
+ /* MDIO */
+ 0x23c (PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_d.mdio_d */
+ 0x240 (PIN_INPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
+ >;
+ };
+
+ davinci_mdio_sleep: davinci_mdio_sleep {
+ pinctrl-single,pins = <
+ 0x23c (MUX_MODE15)
+ 0x240 (MUX_MODE15)
+ >;
+ };
+};
+
+&mac {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&cpsw_default>;
+ pinctrl-1 = <&cpsw_sleep>;
+};
+
+&cpsw_emac1 {
+ phy_id = <&davinci_mdio>, <3>;
+ phy-mode = "rgmii";
+};
+
+&davinci_mdio {
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&davinci_mdio_default>;
+ pinctrl-1 = <&davinci_mdio_sleep>;
+ active_slave = <1>;
+};
+
+&dcan1 {
+ status = "ok";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&dcan1_pins_default>;
+ pinctrl-1 = <&dcan1_pins_sleep>;
+};
interrupts = <GIC_SPI DIRECT_IRQ(131) IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI DIRECT_IRQ(132) IRQ_TYPE_LEVEL_HIGH>;
};
+
+ ocp {
+ omap_dwc3_4: omap_dwc3_4@48940000 {
+ compatible = "ti,dwc3";
+ ti,hwmods = "usb_otg_ss4";
+ reg = <0x48940000 0x10000>;
+ interrupts = <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ utmi-mode = <2>;
+ ranges;
+ status = "disabled";
+ usb4: usb@48950000 {
+ compatible = "snps,dwc3";
+ reg = <0x48950000 0x17000>;
+ interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+ tx-fifo-resize;
+ maximum-speed = "high-speed";
+ dr_mode = "otg";
+ };
+ };
+ };
};
chosen {
bootargs = "console=ttyS1,115200n81 ignore_loglevel root=/dev/nfs ip=dhcp";
- };
-
- reg_1p8v: regulator@0 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- reg_3p3v: regulator@1 {
- compatible = "regulator-fixed";
- regulator-name = "fixed-3.3V";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- lan9220@20000000 {
- compatible = "smsc,lan9220", "smsc,lan9115";
- reg = <0x20000000 0x10000>;
- phy-mode = "mii";
- interrupt-parent = <&gpio0>;
- interrupts = <1 IRQ_TYPE_EDGE_RISING>;
- reg-io-width = <4>;
- smsc,irq-active-high;
- smsc,irq-push-pull;
- vddvario-supply = <®_1p8v>;
- vdd33a-supply = <®_3p3v>;
+ stdout-path = &uart1;
};
gpio_keys {
gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>;
};
};
+
+ reg_1p8v: regulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reg_3p3v: regulator@1 {
+ compatible = "regulator-fixed";
+ regulator-name = "fixed-3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ lan9220@20000000 {
+ compatible = "smsc,lan9220", "smsc,lan9115";
+ reg = <0x20000000 0x10000>;
+ phy-mode = "mii";
+ interrupt-parent = <&gpio0>;
+ interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+ reg-io-width = <4>;
+ smsc,irq-active-high;
+ smsc,irq-push-pull;
+ vddvario-supply = <®_1p8v>;
+ vdd33a-supply = <®_3p3v>;
+ };
};
<0 121 IRQ_TYPE_LEVEL_HIGH>;
};
- smu@e0110000 {
+ clocks@e0110000 {
compatible = "renesas,emev2-smu";
reg = <0xe0110000 0x10000>;
#address-cells = <2>;
};
};
- sti@e0180000 {
+ timer@e0180000 {
compatible = "renesas,em-sti";
reg = <0xe0180000 0x54>;
interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "sclk";
};
- uart@e1020000 {
+ uart0: serial@e1020000 {
compatible = "renesas,em-uart";
reg = <0xe1020000 0x38>;
interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "sclk";
};
- uart@e1030000 {
+ uart1: serial@e1030000 {
compatible = "renesas,em-uart";
reg = <0xe1030000 0x38>;
interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "sclk";
};
- uart@e1040000 {
+ uart2: serial@e1040000 {
compatible = "renesas,em-uart";
reg = <0xe1040000 0x38>;
interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>;
clock-names = "sclk";
};
- uart@e1050000 {
+ uart3: serial@e1050000 {
compatible = "renesas,em-uart";
reg = <0xe1050000 0x38>;
interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>;
--- /dev/null
+/*
+ * Samsung's Exynos3250 based Monk board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Device tree source file for Samsung's Monk board which is based on
+ * Samsung Exynos3250 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos3250.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Samsung Monk board";
+ compatible = "samsung,monk", "samsung,exynos3250", "samsung,exynos3";
+
+ aliases {
+ i2c7 = &i2c_max77836;
+ };
+
+ memory {
+ reg = <0x40000000 0x1ff00000>;
+ };
+
+ firmware@0205F000 {
+ compatible = "samsung,secure-firmware";
+ reg = <0x0205F000 0x1000>;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ power_key {
+ interrupt-parent = <&gpx2>;
+ interrupts = <7 0>;
+ gpios = <&gpx2 7 1>;
+ linux,code = <KEY_POWER>;
+ label = "power key";
+ debounce-interval = <10>;
+ gpio-key,wakeup;
+ };
+ };
+
+ vemmc_reg: voltage-regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "V_EMMC_2.8V-fixed";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ gpio = <&gpk0 2 0>;
+ enable-active-high;
+ };
+
+ i2c_max77836: i2c-gpio-0 {
+ compatible = "i2c-gpio";
+ gpios = <&gpd0 2 0>, <&gpd0 3 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ max77836: subpmic@25 {
+ compatible = "maxim,max77836";
+ interrupt-parent = <&gpx1>;
+ interrupts = <5 0>;
+ reg = <0x25>;
+ wakeup;
+
+ muic: max77836-muic {
+ compatible = "maxim,max77836-muic";
+ };
+
+ regulators {
+ compatible = "maxim,max77836-regulator";
+ safeout_reg: SAFEOUT {
+ regulator-name = "SAFEOUT";
+ };
+
+ charger_reg: CHARGER {
+ regulator-name = "CHARGER";
+ regulator-min-microamp = <45000>;
+ regulator-max-microamp = <475000>;
+ regulator-boot-on;
+ };
+
+ motor_reg: LDO1 {
+ regulator-name = "MOT_2.7V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ LDO2 {
+ regulator-name = "UNUSED_LDO2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+ };
+
+ charger {
+ compatible = "maxim,max77836-charger";
+
+ maxim,constant-uvolt = <4350000>;
+ maxim,fast-charge-uamp = <225000>;
+ maxim,eoc-uamp = <7500>;
+ maxim,ovp-uvolt = <6500000>;
+ };
+ };
+ };
+};
+
+&adc {
+ vdd-supply = <&ldo3_reg>;
+ status = "okay";
+ assigned-clocks = <&cmu CLK_SCLK_TSADC>;
+ assigned-clock-rates = <6000000>;
+
+ thermistor-ap {
+ compatible = "ntc,ncp15wb473";
+ pullup-uv = <1800000>;
+ pullup-ohm = <100000>;
+ pulldown-ohm = <100000>;
+ io-channels = <&adc 0>;
+ };
+
+ thermistor-battery {
+ compatible = "ntc,ncp15wb473";
+ pullup-uv = <1800000>;
+ pullup-ohm = <100000>;
+ pulldown-ohm = <100000>;
+ io-channels = <&adc 1>;
+ };
+};
+
+&i2c_0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <100000>;
+ status = "okay";
+
+ s2mps14_pmic@66 {
+ compatible = "samsung,s2mps14-pmic";
+ interrupt-parent = <&gpx0>;
+ interrupts = <7 0>;
+ reg = <0x66>;
+ wakeup;
+
+ s2mps14_osc: clocks {
+ compatible = "samsung,s2mps14-clk";
+ #clock-cells = <1>;
+ clock-output-names = "s2mps14_ap", "unused",
+ "s2mps14_bt";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VAP_ALIVE_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VAP_M1_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VCC_AP_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VAP_AVDD_PLL1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VAP_PLL_ISO_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VAP_MIPI_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VAP_AVDD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VAP_USB_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "V_LPDDR_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "UNUSED_LDO10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "V_EMMC_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ samsung,ext-control-gpios = <&gpk0 2 0>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "V_EMMC_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ samsung,ext-control-gpios = <&gpk0 2 0>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VSENSOR_2.85V";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+ regulator-always-on;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "UNUSED_LDO14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "TSP_AVDD_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "LCD_VDD_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "UNUSED_LDO17";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "UNUSED_LDO18";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "TSP_VDD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "LCD_VDD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "UNUSED_LDO21";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "UNUSED_LDO22";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "UNUSED_LDO23";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "UNUSED_LDO24";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "UNUSED_LDO25";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "VAP_MIF_1.0V";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <900000>;
+ regulator-always-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "VAP_ARM_1.0V";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "VAP_INT3D_1.0V";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "VCC_SUB_1.95V";
+ regulator-min-microvolt = <1950000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-always-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VCC_SUB_1.35V";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c_1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <400000>;
+ status = "okay";
+
+ fuelgauge@36 {
+ compatible = "maxim,max77836-battery";
+ interrupt-parent = <&gpx1>;
+ interrupts = <2 8>;
+ reg = <0x36>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&mshc_0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ num-slots = <1>;
+ broken-cd;
+ non-removable;
+ cap-mmc-highspeed;
+ desc-num = <4>;
+ mmc-hs200-1_8v;
+ card-detect-delay = <200>;
+ vmmc-supply = <&vemmc_reg>;
+ clock-frequency = <100000000>;
+ clock-freq-min-max = <400000 100000000>;
+ samsung,dw-mshc-ciu-div = <1>;
+ samsung,dw-mshc-sdr-timing = <0 1>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&serial_0 {
+ assigned-clocks = <&cmu CLK_SCLK_UART0>;
+ assigned-clock-rates = <100000000>;
+ status = "okay";
+};
+
+&serial_1 {
+ status = "okay";
+};
+
+&tmu {
+ vtmu-supply = <&ldo7_reg>;
+ status = "okay";
+};
+
+&rtc {
+ clocks = <&cmu CLK_RTC>, <&s2mps14_osc 0>;
+ clock-names = "rtc", "rtc_src";
+ status = "okay";
+};
+
+&xusbxti {
+ clock-frequency = <24000000>;
+};
+
+&pinctrl_0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sleep0>;
+
+ sleep0: sleep-state {
+ PIN_SLP(gpa0-0, INPUT, DOWN);
+ PIN_SLP(gpa0-1, INPUT, DOWN);
+ PIN_SLP(gpa0-2, INPUT, DOWN);
+ PIN_SLP(gpa0-3, INPUT, DOWN);
+ PIN_SLP(gpa0-4, INPUT, DOWN);
+ PIN_SLP(gpa0-5, INPUT, DOWN);
+ PIN_SLP(gpa0-6, INPUT, DOWN);
+ PIN_SLP(gpa0-7, INPUT, DOWN);
+
+ PIN_SLP(gpa1-0, INPUT, DOWN);
+ PIN_SLP(gpa1-1, INPUT, DOWN);
+ PIN_SLP(gpa1-2, INPUT, DOWN);
+ PIN_SLP(gpa1-3, INPUT, DOWN);
+ PIN_SLP(gpa1-4, INPUT, DOWN);
+ PIN_SLP(gpa1-5, INPUT, DOWN);
+
+ PIN_SLP(gpb-0, PREV, NONE);
+ PIN_SLP(gpb-1, PREV, NONE);
+ PIN_SLP(gpb-2, PREV, NONE);
+ PIN_SLP(gpb-3, PREV, NONE);
+ PIN_SLP(gpb-4, INPUT, DOWN);
+ PIN_SLP(gpb-5, INPUT, DOWN);
+ PIN_SLP(gpb-6, INPUT, DOWN);
+ PIN_SLP(gpb-7, INPUT, DOWN);
+
+ PIN_SLP(gpc0-0, INPUT, DOWN);
+ PIN_SLP(gpc0-1, INPUT, DOWN);
+ PIN_SLP(gpc0-2, INPUT, DOWN);
+ PIN_SLP(gpc0-3, INPUT, DOWN);
+ PIN_SLP(gpc0-4, INPUT, DOWN);
+
+ PIN_SLP(gpc1-0, INPUT, DOWN);
+ PIN_SLP(gpc1-1, INPUT, DOWN);
+ PIN_SLP(gpc1-2, INPUT, DOWN);
+ PIN_SLP(gpc1-3, INPUT, DOWN);
+ PIN_SLP(gpc1-4, INPUT, DOWN);
+
+ PIN_SLP(gpd0-0, INPUT, DOWN);
+ PIN_SLP(gpd0-1, INPUT, DOWN);
+ PIN_SLP(gpd0-2, INPUT, NONE);
+ PIN_SLP(gpd0-3, INPUT, NONE);
+
+ PIN_SLP(gpd1-0, INPUT, NONE);
+ PIN_SLP(gpd1-1, INPUT, NONE);
+ PIN_SLP(gpd1-2, INPUT, NONE);
+ PIN_SLP(gpd1-3, INPUT, NONE);
+ };
+};
+
+&pinctrl_1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sleep1>;
+
+ sleep1: sleep-state {
+ PIN_SLP(gpe0-0, PREV, NONE);
+ PIN_SLP(gpe0-1, PREV, NONE);
+ PIN_SLP(gpe0-2, INPUT, DOWN);
+ PIN_SLP(gpe0-3, INPUT, DOWN);
+ PIN_SLP(gpe0-4, PREV, NONE);
+ PIN_SLP(gpe0-5, INPUT, DOWN);
+ PIN_SLP(gpe0-6, INPUT, DOWN);
+ PIN_SLP(gpe0-7, INPUT, DOWN);
+
+ PIN_SLP(gpe1-0, INPUT, DOWN);
+ PIN_SLP(gpe1-1, PREV, NONE);
+ PIN_SLP(gpe1-2, INPUT, DOWN);
+ PIN_SLP(gpe1-3, INPUT, DOWN);
+ PIN_SLP(gpe1-4, INPUT, DOWN);
+ PIN_SLP(gpe1-5, INPUT, DOWN);
+ PIN_SLP(gpe1-6, INPUT, DOWN);
+ PIN_SLP(gpe1-7, INPUT, NONE);
+
+ PIN_SLP(gpe2-0, INPUT, NONE);
+ PIN_SLP(gpe2-1, INPUT, NONE);
+ PIN_SLP(gpe2-2, INPUT, NONE);
+
+ PIN_SLP(gpk0-0, INPUT, DOWN);
+ PIN_SLP(gpk0-1, INPUT, DOWN);
+ PIN_SLP(gpk0-2, OUT0, NONE);
+ PIN_SLP(gpk0-3, INPUT, DOWN);
+ PIN_SLP(gpk0-4, INPUT, DOWN);
+ PIN_SLP(gpk0-5, INPUT, DOWN);
+ PIN_SLP(gpk0-6, INPUT, DOWN);
+ PIN_SLP(gpk0-7, INPUT, DOWN);
+
+ PIN_SLP(gpk1-0, PREV, NONE);
+ PIN_SLP(gpk1-1, PREV, NONE);
+ PIN_SLP(gpk1-2, INPUT, DOWN);
+ PIN_SLP(gpk1-3, PREV, NONE);
+ PIN_SLP(gpk1-4, PREV, NONE);
+ PIN_SLP(gpk1-5, PREV, NONE);
+ PIN_SLP(gpk1-6, PREV, NONE);
+
+ PIN_SLP(gpk2-0, INPUT, DOWN);
+ PIN_SLP(gpk2-1, INPUT, DOWN);
+ PIN_SLP(gpk2-2, INPUT, DOWN);
+ PIN_SLP(gpk2-3, INPUT, DOWN);
+ PIN_SLP(gpk2-4, INPUT, DOWN);
+ PIN_SLP(gpk2-5, INPUT, DOWN);
+ PIN_SLP(gpk2-6, INPUT, DOWN);
+
+ PIN_SLP(gpl0-0, INPUT, DOWN);
+ PIN_SLP(gpl0-1, INPUT, DOWN);
+ PIN_SLP(gpl0-2, INPUT, DOWN);
+ PIN_SLP(gpl0-3, INPUT, DOWN);
+
+ PIN_SLP(gpm0-0, INPUT, DOWN);
+ PIN_SLP(gpm0-1, INPUT, DOWN);
+ PIN_SLP(gpm0-2, INPUT, DOWN);
+ PIN_SLP(gpm0-3, INPUT, DOWN);
+ PIN_SLP(gpm0-4, INPUT, DOWN);
+ PIN_SLP(gpm0-5, INPUT, DOWN);
+ PIN_SLP(gpm0-6, INPUT, DOWN);
+ PIN_SLP(gpm0-7, INPUT, DOWN);
+
+ PIN_SLP(gpm1-0, INPUT, DOWN);
+ PIN_SLP(gpm1-1, INPUT, DOWN);
+ PIN_SLP(gpm1-2, INPUT, DOWN);
+ PIN_SLP(gpm1-3, INPUT, DOWN);
+ PIN_SLP(gpm1-4, INPUT, DOWN);
+ PIN_SLP(gpm1-5, INPUT, DOWN);
+ PIN_SLP(gpm1-6, INPUT, DOWN);
+
+ PIN_SLP(gpm2-0, INPUT, DOWN);
+ PIN_SLP(gpm2-1, INPUT, DOWN);
+ PIN_SLP(gpm2-2, INPUT, DOWN);
+ PIN_SLP(gpm2-3, INPUT, DOWN);
+ PIN_SLP(gpm2-4, INPUT, DOWN);
+
+ PIN_SLP(gpm3-0, INPUT, DOWN);
+ PIN_SLP(gpm3-1, INPUT, DOWN);
+ PIN_SLP(gpm3-2, INPUT, DOWN);
+ PIN_SLP(gpm3-3, INPUT, DOWN);
+ PIN_SLP(gpm3-4, INPUT, DOWN);
+ PIN_SLP(gpm3-5, INPUT, DOWN);
+ PIN_SLP(gpm3-6, INPUT, DOWN);
+ PIN_SLP(gpm3-7, INPUT, DOWN);
+
+ PIN_SLP(gpm4-0, INPUT, DOWN);
+ PIN_SLP(gpm4-1, INPUT, DOWN);
+ PIN_SLP(gpm4-2, INPUT, DOWN);
+ PIN_SLP(gpm4-3, INPUT, DOWN);
+ PIN_SLP(gpm4-4, INPUT, DOWN);
+ PIN_SLP(gpm4-5, INPUT, DOWN);
+ PIN_SLP(gpm4-6, INPUT, DOWN);
+ PIN_SLP(gpm4-7, INPUT, DOWN);
+ };
+};
* published by the Free Software Foundation.
*/
+#define PIN_PULL_NONE 0
+#define PIN_PULL_DOWN 1
+#define PIN_PULL_UP 3
+
+#define PIN_PDN_OUT0 0
+#define PIN_PDN_OUT1 1
+#define PIN_PDN_INPUT 2
+#define PIN_PDN_PREV 3
+
+#define PIN_SLP(_pin, _mode, _pull) \
+ _pin { \
+ samsung,pins = #_pin; \
+ samsung,pin-con-pdn = <PIN_PDN_ ##_mode>; \
+ samsung,pin-pud-pdn = <PIN_PULL_ ##_pull>; \
+ }
+
&pinctrl_0 {
gpa0: gpa0 {
gpio-controller;
--- /dev/null
+/*
+ * Samsung's Exynos3250 based Rinato board device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Device tree source file for Samsung's Rinato board which is based on
+ * Samsung Exynos3250 SoC.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include "exynos3250.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Samsung Rinato board";
+ compatible = "samsung,rinato", "samsung,exynos3250", "samsung,exynos3";
+
+ aliases {
+ i2c7 = &i2c_max77836;
+ };
+
+ memory {
+ reg = <0x40000000 0x1ff00000>;
+ };
+
+ firmware@0205F000 {
+ compatible = "samsung,secure-firmware";
+ reg = <0x0205F000 0x1000>;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+
+ power_key {
+ interrupt-parent = <&gpx2>;
+ interrupts = <7 0>;
+ gpios = <&gpx2 7 1>;
+ linux,code = <KEY_POWER>;
+ label = "power key";
+ debounce-interval = <10>;
+ gpio-key,wakeup;
+ };
+ };
+
+ i2c_max77836: i2c-gpio-0 {
+ compatible = "i2c-gpio";
+ gpios = <&gpd0 2 0>, <&gpd0 3 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ max77836: subpmic@25 {
+ compatible = "maxim,max77836";
+ interrupt-parent = <&gpx1>;
+ interrupts = <5 0>;
+ reg = <0x25>;
+ wakeup;
+
+ muic: max77836-muic {
+ compatible = "maxim,max77836-muic";
+ };
+
+ regulators {
+ compatible = "maxim,max77836-regulator";
+ safeout_reg: SAFEOUT {
+ regulator-name = "SAFEOUT";
+ };
+
+ charger_reg: CHARGER {
+ regulator-name = "CHARGER";
+ regulator-min-microamp = <45000>;
+ regulator-max-microamp = <475000>;
+ regulator-boot-on;
+ };
+
+ motor_reg: LDO1 {
+ regulator-name = "MOT_2.7V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ LDO2 {
+ regulator-name = "UNUSED_LDO2";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ };
+ };
+
+ charger {
+ compatible = "maxim,max77836-charger";
+
+ maxim,constant-uvolt = <4350000>;
+ maxim,fast-charge-uamp = <225000>;
+ maxim,eoc-uamp = <7500>;
+ maxim,ovp-uvolt = <6500000>;
+ };
+ };
+ };
+};
+
+&adc {
+ vdd-supply = <&ldo3_reg>;
+ status = "okay";
+ assigned-clocks = <&cmu CLK_SCLK_TSADC>;
+ assigned-clock-rates = <6000000>;
+
+ thermistor-ap {
+ compatible = "ntc,ncp15wb473";
+ pullup-uv = <1800000>;
+ pullup-ohm = <100000>;
+ pulldown-ohm = <100000>;
+ io-channels = <&adc 0>;
+ };
+
+ thermistor-battery {
+ compatible = "ntc,ncp15wb473";
+ pullup-uv = <1800000>;
+ pullup-ohm = <100000>;
+ pulldown-ohm = <100000>;
+ io-channels = <&adc 1>;
+ };
+};
+
+&i2c_0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <100000>;
+ status = "okay";
+
+ s2mps14_pmic@66 {
+ compatible = "samsung,s2mps14-pmic";
+ interrupt-parent = <&gpx0>;
+ interrupts = <7 0>;
+ reg = <0x66>;
+ wakeup;
+
+ s2mps14_osc: clocks {
+ compatible = "samsung,s2mps14-clk";
+ #clock-cells = <1>;
+ clock-output-names = "s2mps14_ap", "unused",
+ "s2mps14_bt";
+ };
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VAP_ALIVE_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo2_reg: LDO2 {
+ regulator-name = "VAP_M1_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VCC_AP_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VAP_AVDD_PLL1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VAP_PLL_ISO_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VAP_VMIPI_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "VAP_AVDD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VAP_USB_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "V_LPDDR_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "UNUSED_LDO10";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "V_EMMC_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ samsung,ext-control-gpios = <&gpk0 2 0>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "V_EMMC_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ samsung,ext-control-gpios = <&gpk0 2 0>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "CAM_AVDD_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "UNUSED_LDO14";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "TSP_AVDD_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "LCD_VDD_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "V_IRLED_3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "CAM_AF_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo19_reg: LDO19 {
+ regulator-name = "TSP_VDD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo20_reg: LDO20 {
+ regulator-name = "LCD_VDD_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo21_reg: LDO21 {
+ regulator-name = "CAM_IO_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "CAM_DVDD_1.2V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "HRM_VCC_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ ldo24_reg: LDO24 {
+ regulator-name = "HRM_VCC_3.3V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "UNUSED_LDO25";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "VAP_MIF_1.0V";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <900000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "VAP_ARM_1.0V";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1150000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "VAP_INT3D_1.0V";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "VCC_SUB_1.95V";
+ regulator-min-microvolt = <1950000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VCC_SUB_1.35V";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+ };
+ };
+};
+
+&i2c_1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-slave-addr = <0x10>;
+ samsung,i2c-max-bus-freq = <400000>;
+ status = "okay";
+
+ fuelgauge@36 {
+ compatible = "maxim,max77836-battery";
+ interrupt-parent = <&gpx1>;
+ interrupts = <2 8>;
+ reg = <0x36>;
+ };
+};
+
+&i2s2 {
+ status = "okay";
+};
+
+&mfc {
+ status = "okay";
+};
+
+&mshc_0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ num-slots = <1>;
+ broken-cd;
+ non-removable;
+ cap-mmc-highspeed;
+ desc-num = <4>;
+ mmc-hs200-1_8v;
+ card-detect-delay = <200>;
+ vmmc-supply = <&ldo12_reg>;
+ clock-frequency = <100000000>;
+ clock-freq-min-max = <400000 100000000>;
+ samsung,dw-mshc-ciu-div = <1>;
+ samsung,dw-mshc-sdr-timing = <0 1>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_cmd &sd0_bus1 &sd0_bus4 &sd0_bus8>;
+ bus-width = <8>;
+ status = "okay";
+};
+
+&serial_0 {
+ assigned-clocks = <&cmu CLK_SCLK_UART0>;
+ assigned-clock-rates = <100000000>;
+ status = "okay";
+};
+
+&serial_1 {
+ status = "okay";
+};
+
+&tmu {
+ vtmu-supply = <&ldo7_reg>;
+ status = "okay";
+};
+
+&rtc {
+ clocks = <&cmu CLK_RTC>, <&s2mps14_osc 0>;
+ clock-names = "rtc", "rtc_src";
+ status = "okay";
+};
+
+&xusbxti {
+ clock-frequency = <24000000>;
+};
+
+&pinctrl_0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sleep0>;
+
+ sleep0: sleep-state {
+ PIN_SLP(gpa0-0, INPUT, DOWN);
+ PIN_SLP(gpa0-1, INPUT, DOWN);
+ PIN_SLP(gpa0-2, INPUT, DOWN);
+ PIN_SLP(gpa0-3, INPUT, DOWN);
+ PIN_SLP(gpa0-4, INPUT, DOWN);
+ PIN_SLP(gpa0-5, INPUT, DOWN);
+ PIN_SLP(gpa0-6, INPUT, DOWN);
+ PIN_SLP(gpa0-7, INPUT, DOWN);
+
+ PIN_SLP(gpa1-0, INPUT, DOWN);
+ PIN_SLP(gpa1-1, INPUT, DOWN);
+ PIN_SLP(gpa1-2, INPUT, DOWN);
+ PIN_SLP(gpa1-3, INPUT, DOWN);
+ PIN_SLP(gpa1-4, INPUT, DOWN);
+ PIN_SLP(gpa1-5, INPUT, DOWN);
+
+ PIN_SLP(gpb-0, PREV, NONE);
+ PIN_SLP(gpb-1, PREV, NONE);
+ PIN_SLP(gpb-2, PREV, NONE);
+ PIN_SLP(gpb-3, PREV, NONE);
+ PIN_SLP(gpb-4, INPUT, DOWN);
+ PIN_SLP(gpb-5, INPUT, DOWN);
+ PIN_SLP(gpb-6, INPUT, DOWN);
+ PIN_SLP(gpb-7, INPUT, DOWN);
+
+ PIN_SLP(gpc0-0, INPUT, DOWN);
+ PIN_SLP(gpc0-1, INPUT, DOWN);
+ PIN_SLP(gpc0-2, INPUT, DOWN);
+ PIN_SLP(gpc0-3, INPUT, DOWN);
+ PIN_SLP(gpc0-4, INPUT, DOWN);
+
+ PIN_SLP(gpc1-0, INPUT, DOWN);
+ PIN_SLP(gpc1-1, INPUT, DOWN);
+ PIN_SLP(gpc1-2, INPUT, DOWN);
+ PIN_SLP(gpc1-3, INPUT, DOWN);
+ PIN_SLP(gpc1-4, INPUT, DOWN);
+
+ PIN_SLP(gpd0-0, INPUT, DOWN);
+ PIN_SLP(gpd0-1, INPUT, DOWN);
+ PIN_SLP(gpd0-2, INPUT, NONE);
+ PIN_SLP(gpd0-3, INPUT, NONE);
+
+ PIN_SLP(gpd1-0, INPUT, NONE);
+ PIN_SLP(gpd1-1, INPUT, NONE);
+ PIN_SLP(gpd1-2, INPUT, NONE);
+ PIN_SLP(gpd1-3, INPUT, NONE);
+ };
+};
+
+&pinctrl_1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sleep1>;
+
+ sleep1: sleep-state {
+ PIN_SLP(gpe0-0, PREV, NONE);
+ PIN_SLP(gpe0-1, PREV, NONE);
+ PIN_SLP(gpe0-2, INPUT, DOWN);
+ PIN_SLP(gpe0-3, INPUT, UP);
+ PIN_SLP(gpe0-4, INPUT, DOWN);
+ PIN_SLP(gpe0-5, INPUT, DOWN);
+ PIN_SLP(gpe0-6, INPUT, DOWN);
+ PIN_SLP(gpe0-7, INPUT, DOWN);
+
+ PIN_SLP(gpe1-0, INPUT, DOWN);
+ PIN_SLP(gpe1-1, PREV, NONE);
+ PIN_SLP(gpe1-2, INPUT, DOWN);
+ PIN_SLP(gpe1-3, INPUT, DOWN);
+ PIN_SLP(gpe1-4, INPUT, DOWN);
+ PIN_SLP(gpe1-5, INPUT, DOWN);
+ PIN_SLP(gpe1-6, INPUT, DOWN);
+ PIN_SLP(gpe1-7, INPUT, NONE);
+
+ PIN_SLP(gpe2-0, INPUT, NONE);
+ PIN_SLP(gpe2-1, INPUT, NONE);
+ PIN_SLP(gpe2-2, INPUT, NONE);
+
+ PIN_SLP(gpk0-0, INPUT, DOWN);
+ PIN_SLP(gpk0-1, INPUT, DOWN);
+ PIN_SLP(gpk0-2, OUT0, NONE);
+ PIN_SLP(gpk0-3, INPUT, DOWN);
+ PIN_SLP(gpk0-4, INPUT, DOWN);
+ PIN_SLP(gpk0-5, INPUT, DOWN);
+ PIN_SLP(gpk0-6, INPUT, DOWN);
+ PIN_SLP(gpk0-7, INPUT, DOWN);
+
+ PIN_SLP(gpk1-0, INPUT, DOWN);
+ PIN_SLP(gpk1-1, INPUT, DOWN);
+ PIN_SLP(gpk1-2, INPUT, DOWN);
+ PIN_SLP(gpk1-3, INPUT, DOWN);
+ PIN_SLP(gpk1-4, INPUT, DOWN);
+ PIN_SLP(gpk1-5, INPUT, DOWN);
+ PIN_SLP(gpk1-6, INPUT, DOWN);
+
+ PIN_SLP(gpk2-0, INPUT, DOWN);
+ PIN_SLP(gpk2-1, INPUT, DOWN);
+ PIN_SLP(gpk2-2, INPUT, DOWN);
+ PIN_SLP(gpk2-3, INPUT, DOWN);
+ PIN_SLP(gpk2-4, INPUT, DOWN);
+ PIN_SLP(gpk2-5, INPUT, DOWN);
+ PIN_SLP(gpk2-6, INPUT, DOWN);
+
+ PIN_SLP(gpl0-0, INPUT, DOWN);
+ PIN_SLP(gpl0-1, INPUT, DOWN);
+ PIN_SLP(gpl0-2, INPUT, DOWN);
+ PIN_SLP(gpl0-3, INPUT, DOWN);
+
+ PIN_SLP(gpm0-0, INPUT, DOWN);
+ PIN_SLP(gpm0-1, INPUT, DOWN);
+ PIN_SLP(gpm0-2, INPUT, DOWN);
+ PIN_SLP(gpm0-3, INPUT, DOWN);
+ PIN_SLP(gpm0-4, INPUT, DOWN);
+ PIN_SLP(gpm0-5, INPUT, DOWN);
+ PIN_SLP(gpm0-6, INPUT, DOWN);
+ PIN_SLP(gpm0-7, INPUT, DOWN);
+
+ PIN_SLP(gpm1-0, INPUT, DOWN);
+ PIN_SLP(gpm1-1, INPUT, DOWN);
+ PIN_SLP(gpm1-2, INPUT, DOWN);
+ PIN_SLP(gpm1-3, INPUT, DOWN);
+ PIN_SLP(gpm1-4, INPUT, DOWN);
+ PIN_SLP(gpm1-5, INPUT, DOWN);
+ PIN_SLP(gpm1-6, INPUT, DOWN);
+
+ PIN_SLP(gpm2-0, INPUT, DOWN);
+ PIN_SLP(gpm2-1, INPUT, DOWN);
+ PIN_SLP(gpm2-2, INPUT, DOWN);
+ PIN_SLP(gpm2-3, INPUT, DOWN);
+ PIN_SLP(gpm2-4, INPUT, DOWN);
+
+ PIN_SLP(gpm3-0, INPUT, DOWN);
+ PIN_SLP(gpm3-1, INPUT, DOWN);
+ PIN_SLP(gpm3-2, INPUT, DOWN);
+ PIN_SLP(gpm3-3, INPUT, DOWN);
+ PIN_SLP(gpm3-4, INPUT, DOWN);
+ PIN_SLP(gpm3-5, INPUT, DOWN);
+ PIN_SLP(gpm3-6, INPUT, DOWN);
+ PIN_SLP(gpm3-7, INPUT, DOWN);
+
+ PIN_SLP(gpm4-0, INPUT, DOWN);
+ PIN_SLP(gpm4-1, INPUT, DOWN);
+ PIN_SLP(gpm4-2, INPUT, DOWN);
+ PIN_SLP(gpm4-3, INPUT, DOWN);
+ PIN_SLP(gpm4-4, INPUT, DOWN);
+ PIN_SLP(gpm4-5, INPUT, DOWN);
+ PIN_SLP(gpm4-6, INPUT, DOWN);
+ PIN_SLP(gpm4-7, INPUT, DOWN);
+ };
+};
status = "disabled";
};
+ mfc: codec@13400000 {
+ compatible = "samsung,mfc-v7";
+ reg = <0x13400000 0x10000>;
+ interrupts = <0 102 0>;
+ clock-names = "mfc", "sclk_mfc";
+ clocks = <&cmu CLK_MFC>, <&cmu CLK_SCLK_MFC>;
+ samsung,power-domain = <&pd_mfc>;
+ status = "disabled";
+ };
+
serial_0: serial@13800000 {
compatible = "samsung,exynos4210-uart";
reg = <0x13800000 0x100>;
reg = <0x13400000 0x10000>;
interrupts = <0 94 0>;
samsung,power-domain = <&pd_mfc>;
- clocks = <&clock CLK_MFC>;
- clock-names = "mfc";
+ clocks = <&clock CLK_MFC>, <&clock CLK_SCLK_MFC>;
+ clock-names = "mfc", "sclk_mfc";
status = "disabled";
};
fimc_0: fimc@11800000 {
status = "okay";
+ assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+ <&clock CLK_SCLK_FIMC0>;
+ assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+ assigned-clock-rates = <0>, <160000000>;
};
fimc_1: fimc@11810000 {
status = "okay";
+ assigned-clocks = <&clock CLK_MOUT_FIMC1>,
+ <&clock CLK_SCLK_FIMC1>;
+ assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+ assigned-clock-rates = <0>, <160000000>;
};
fimc_2: fimc@11820000 {
status = "okay";
+ assigned-clocks = <&clock CLK_MOUT_FIMC2>,
+ <&clock CLK_SCLK_FIMC2>;
+ assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+ assigned-clock-rates = <0>, <160000000>;
};
fimc_3: fimc@11830000 {
status = "okay";
+ assigned-clocks = <&clock CLK_MOUT_FIMC3>,
+ <&clock CLK_SCLK_FIMC3>;
+ assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+ assigned-clock-rates = <0>, <160000000>;
};
};
};
fimc_0: fimc@11800000 {
status = "okay";
+ assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+ <&clock CLK_SCLK_FIMC0>;
+ assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+ assigned-clock-rates = <0>, <160000000>;
};
fimc_1: fimc@11810000 {
status = "okay";
+ assigned-clocks = <&clock CLK_MOUT_FIMC1>,
+ <&clock CLK_SCLK_FIMC1>;
+ assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+ assigned-clock-rates = <0>, <160000000>;
};
fimc_2: fimc@11820000 {
status = "okay";
+ assigned-clocks = <&clock CLK_MOUT_FIMC2>,
+ <&clock CLK_SCLK_FIMC2>;
+ assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+ assigned-clock-rates = <0>, <160000000>;
};
fimc_3: fimc@11830000 {
status = "okay";
+ assigned-clocks = <&clock CLK_MOUT_FIMC3>,
+ <&clock CLK_SCLK_FIMC3>;
+ assigned-clock-parents = <&clock CLK_SCLK_MPLL>;
+ assigned-clock-rates = <0>, <160000000>;
};
};
};
pinctrl2 = &pinctrl_2;
};
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@900 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x900>;
+ };
+
+ cpu@901 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0x901>;
+ };
+ };
+
pmu_system_controller: system-controller@10020000 {
clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
"clkout4", "clkout8", "clkout9";
/ {
compatible = "samsung,exynos4212", "samsung,exynos4";
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@A00 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xA00>;
+ };
+
+ cpu@A01 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xA01>;
+ };
+ };
+
combiner: interrupt-controller@10440000 {
samsung,combiner-nr = <18>;
};
compatible = "samsung,odroidx2-audio";
samsung,i2s-controller = <&i2s0>;
samsung,audio-codec = <&max98090>;
+ assigned-clocks = <&clock_audss EXYNOS_MOUT_AUDSS>,
+ <&clock_audss EXYNOS_MOUT_I2S>,
+ <&clock_audss EXYNOS_DOUT_SRP>,
+ <&clock_audss EXYNOS_DOUT_AUD_BUS>;
+ assigned-clock-parents = <&clock CLK_FOUT_EPLL>,
+ <&clock_audss EXYNOS_MOUT_AUDSS>;
+ assigned-clock-rates = <0>,
+ <0>,
+ <192000000>,
+ <19200000>;
};
mmc@12550000 {
fimc_0: fimc@11800000 {
status = "okay";
+ assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+ <&clock CLK_SCLK_FIMC0>;
+ assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+ assigned-clock-rates = <0>, <176000000>;
};
fimc_1: fimc@11810000 {
status = "okay";
+ assigned-clocks = <&clock CLK_MOUT_FIMC1>,
+ <&clock CLK_SCLK_FIMC1>;
+ assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+ assigned-clock-rates = <0>, <176000000>;
};
fimc_2: fimc@11820000 {
status = "okay";
+ assigned-clocks = <&clock CLK_MOUT_FIMC2>,
+ <&clock CLK_SCLK_FIMC2>;
+ assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+ assigned-clock-rates = <0>, <176000000>;
};
fimc_3: fimc@11830000 {
status = "okay";
+ assigned-clocks = <&clock CLK_MOUT_FIMC3>,
+ <&clock CLK_SCLK_FIMC3>;
+ assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+ assigned-clock-rates = <0>, <176000000>;
};
};
/dts-v1/;
#include "exynos4412.dtsi"
+#include <dt-bindings/gpio/gpio.h>
/ {
model = "Samsung Trats 2 based on Exynos4412";
aliases {
i2c9 = &i2c_ak8975;
i2c10 = &i2c_cm36651;
+ i2c11 = &i2c_max77693;
};
memory {
regulator-name = "VMEM_VDD_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- regulator-always-on;
- regulator-mem-off;
};
ldo23_reg: ldo23 {
regulator-name = "VMEM_VDDF_3.0V";
regulator-min-microvolt = <2850000>;
regulator-max-microvolt = <2850000>;
- regulator-always-on;
- regulator-mem-off;
};
buck9_reg: buck9 {
};
};
+ i2c_max77693: i2c-gpio-1 {
+ compatible = "i2c-gpio";
+ gpios = <&gpm2 0 GPIO_ACTIVE_HIGH>, <&gpm2 1 GPIO_ACTIVE_HIGH>;
+ i2c-gpio,delay-us = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ max77693@66 {
+ compatible = "maxim,max77693";
+ interrupt-parent = <&gpx1>;
+ interrupts = <5 2>;
+ reg = <0x66>;
+
+ regulators {
+ esafeout1_reg: ESAFEOUT1@1 {
+ regulator-name = "ESAFEOUT1";
+ };
+ esafeout2_reg: ESAFEOUT2@2 {
+ regulator-name = "ESAFEOUT2";
+ };
+ charger_reg: CHARGER@0 {
+ regulator-name = "CHARGER";
+ regulator-min-microamp = <60000>;
+ regulator-max-microamp = <2580000>;
+ };
+ };
+
+ max77693_haptic {
+ compatible = "maxim,max77693-haptic";
+ haptic-supply = <&ldo26_reg>;
+ pwms = <&pwm 0 38022 0>;
+ };
+ };
+ };
+
mmc@12550000 {
num-slots = <1>;
broken-cd;
cap-mmc-highspeed;
};
+ sdhci@12530000 {
+ bus-width = <4>;
+ cd-gpios = <&gpx3 4 0>;
+ cd-inverted;
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
+ pinctrl-names = "default";
+ vmmc-supply = <&ldo21_reg>;
+ status = "okay";
+ };
+
serial@13800000 {
status = "okay";
};
status = "okay";
};
+ tmu@100C0000 {
+ vtmu-supply = <&ldo10_reg>;
+ status = "okay";
+ };
+
i2c_ak8975: i2c-gpio-0 {
compatible = "i2c-gpio";
gpios = <&gpy2 4 0>, <&gpy2 5 0>;
};
};
+ pwm: pwm@139D0000 {
+ pinctrl-0 = <&pwm0_out>;
+ pinctrl-names = "default";
+ samsung,pwm-outputs = <0>;
+ status = "okay";
+ };
+
dsi_0: dsi@11C80000 {
vddcore-supply = <&ldo8_reg>;
vddio-supply = <&ldo10_reg>;
pinctrl-0 = <&cam_port_a_clk_active &cam_port_b_clk_active>;
pinctrl-names = "default";
status = "okay";
+ assigned-clocks = <&clock CLK_MOUT_CAM0>,
+ <&clock CLK_MOUT_CAM1>;
+ assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>,
+ <&clock CLK_MOUT_MPLL_USER_T>;
fimc_0: fimc@11800000 {
status = "okay";
+ assigned-clocks = <&clock CLK_MOUT_FIMC0>,
+ <&clock CLK_SCLK_FIMC0>;
+ assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+ assigned-clock-rates = <0>, <176000000>;
};
fimc_1: fimc@11810000 {
status = "okay";
+ assigned-clocks = <&clock CLK_MOUT_FIMC1>,
+ <&clock CLK_SCLK_FIMC1>;
+ assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+ assigned-clock-rates = <0>, <176000000>;
};
fimc_2: fimc@11820000 {
status = "okay";
+ assigned-clocks = <&clock CLK_MOUT_FIMC2>,
+ <&clock CLK_SCLK_FIMC2>;
+ assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+ assigned-clock-rates = <0>, <176000000>;
};
fimc_3: fimc@11830000 {
status = "okay";
+ assigned-clocks = <&clock CLK_MOUT_FIMC3>,
+ <&clock CLK_SCLK_FIMC3>;
+ assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+ assigned-clock-rates = <0>, <176000000>;
};
csis_0: csis@11880000 {
status = "okay";
vddcore-supply = <&ldo8_reg>;
vddio-supply = <&ldo10_reg>;
- clock-frequency = <176000000>;
+ assigned-clocks = <&clock CLK_MOUT_CSIS0>,
+ <&clock CLK_SCLK_CSIS0>;
+ assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+ assigned-clock-rates = <0>, <176000000>;
/* Camera C (3) MIPI CSI-2 (CSIS0) */
port@3 {
};
csis_1: csis@11890000 {
+ status = "okay";
vddcore-supply = <&ldo8_reg>;
vddio-supply = <&ldo10_reg>;
- clock-frequency = <160000000>;
- status = "okay";
+ assigned-clocks = <&clock CLK_MOUT_CSIS1>,
+ <&clock CLK_SCLK_CSIS1>;
+ assigned-clock-parents = <&clock CLK_MOUT_MPLL_USER_T>;
+ assigned-clock-rates = <0>, <176000000>;
/* Camera D (4) MIPI CSI-2 (CSIS1) */
port@4 {
io-channels = <&adc 2>; /* Battery temperature */
};
};
+
+&pinctrl_0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sleep0>;
+
+ sleep0: sleep-states {
+ PIN_SLP(gpa0-0, INPUT, NONE);
+ PIN_SLP(gpa0-1, OUT0, NONE);
+ PIN_SLP(gpa0-2, INPUT, NONE);
+ PIN_SLP(gpa0-3, INPUT, UP);
+ PIN_SLP(gpa0-4, INPUT, NONE);
+ PIN_SLP(gpa0-5, INPUT, DOWN);
+ PIN_SLP(gpa0-6, INPUT, DOWN);
+ PIN_SLP(gpa0-7, INPUT, UP);
+
+ PIN_SLP(gpa1-0, INPUT, DOWN);
+ PIN_SLP(gpa1-1, INPUT, DOWN);
+ PIN_SLP(gpa1-2, INPUT, DOWN);
+ PIN_SLP(gpa1-3, INPUT, DOWN);
+ PIN_SLP(gpa1-4, INPUT, DOWN);
+ PIN_SLP(gpa1-5, INPUT, DOWN);
+
+ PIN_SLP(gpb-0, INPUT, NONE);
+ PIN_SLP(gpb-1, INPUT, NONE);
+ PIN_SLP(gpb-2, INPUT, NONE);
+ PIN_SLP(gpb-3, INPUT, NONE);
+ PIN_SLP(gpb-4, INPUT, DOWN);
+ PIN_SLP(gpb-5, INPUT, UP);
+ PIN_SLP(gpb-6, INPUT, DOWN);
+ PIN_SLP(gpb-7, INPUT, DOWN);
+
+ PIN_SLP(gpc0-0, INPUT, DOWN);
+ PIN_SLP(gpc0-1, INPUT, DOWN);
+ PIN_SLP(gpc0-2, INPUT, DOWN);
+ PIN_SLP(gpc0-3, INPUT, DOWN);
+ PIN_SLP(gpc0-4, INPUT, DOWN);
+
+ PIN_SLP(gpc1-0, INPUT, NONE);
+ PIN_SLP(gpc1-1, PREV, NONE);
+ PIN_SLP(gpc1-2, INPUT, NONE);
+ PIN_SLP(gpc1-3, INPUT, NONE);
+ PIN_SLP(gpc1-4, INPUT, NONE);
+
+ PIN_SLP(gpd0-0, INPUT, DOWN);
+ PIN_SLP(gpd0-1, INPUT, DOWN);
+ PIN_SLP(gpd0-2, INPUT, NONE);
+ PIN_SLP(gpd0-3, INPUT, NONE);
+
+ PIN_SLP(gpd1-0, INPUT, DOWN);
+ PIN_SLP(gpd1-1, INPUT, DOWN);
+ PIN_SLP(gpd1-2, INPUT, NONE);
+ PIN_SLP(gpd1-3, INPUT, NONE);
+
+ PIN_SLP(gpf0-0, INPUT, NONE);
+ PIN_SLP(gpf0-1, INPUT, NONE);
+ PIN_SLP(gpf0-2, INPUT, DOWN);
+ PIN_SLP(gpf0-3, INPUT, DOWN);
+ PIN_SLP(gpf0-4, INPUT, NONE);
+ PIN_SLP(gpf0-5, INPUT, DOWN);
+ PIN_SLP(gpf0-6, INPUT, NONE);
+ PIN_SLP(gpf0-7, INPUT, DOWN);
+
+ PIN_SLP(gpf1-0, INPUT, DOWN);
+ PIN_SLP(gpf1-1, INPUT, DOWN);
+ PIN_SLP(gpf1-2, INPUT, DOWN);
+ PIN_SLP(gpf1-3, INPUT, DOWN);
+ PIN_SLP(gpf1-4, INPUT, NONE);
+ PIN_SLP(gpf1-5, INPUT, NONE);
+ PIN_SLP(gpf1-6, INPUT, DOWN);
+ PIN_SLP(gpf1-7, PREV, NONE);
+
+ PIN_SLP(gpf2-0, PREV, NONE);
+ PIN_SLP(gpf2-1, INPUT, DOWN);
+ PIN_SLP(gpf2-2, INPUT, DOWN);
+ PIN_SLP(gpf2-3, INPUT, DOWN);
+ PIN_SLP(gpf2-4, INPUT, DOWN);
+ PIN_SLP(gpf2-5, INPUT, DOWN);
+ PIN_SLP(gpf2-6, INPUT, NONE);
+ PIN_SLP(gpf2-7, INPUT, NONE);
+
+ PIN_SLP(gpf3-0, INPUT, NONE);
+ PIN_SLP(gpf3-1, PREV, NONE);
+ PIN_SLP(gpf3-2, PREV, NONE);
+ PIN_SLP(gpf3-3, PREV, NONE);
+ PIN_SLP(gpf3-4, OUT1, NONE);
+ PIN_SLP(gpf3-5, INPUT, DOWN);
+
+ PIN_SLP(gpj0-0, PREV, NONE);
+ PIN_SLP(gpj0-1, PREV, NONE);
+ PIN_SLP(gpj0-2, PREV, NONE);
+ PIN_SLP(gpj0-3, INPUT, DOWN);
+ PIN_SLP(gpj0-4, PREV, NONE);
+ PIN_SLP(gpj0-5, PREV, NONE);
+ PIN_SLP(gpj0-6, INPUT, DOWN);
+ PIN_SLP(gpj0-7, INPUT, DOWN);
+
+ PIN_SLP(gpj1-0, INPUT, DOWN);
+ PIN_SLP(gpj1-1, PREV, NONE);
+ PIN_SLP(gpj1-2, PREV, NONE);
+ PIN_SLP(gpj1-3, INPUT, DOWN);
+ PIN_SLP(gpj1-4, INPUT, DOWN);
+ };
+};
+
+&pinctrl_1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sleep1>;
+
+ sleep1: sleep-states {
+ PIN_SLP(gpk0-0, PREV, NONE);
+ PIN_SLP(gpk0-1, PREV, NONE);
+ PIN_SLP(gpk0-2, OUT0, NONE);
+ PIN_SLP(gpk0-3, PREV, NONE);
+ PIN_SLP(gpk0-4, PREV, NONE);
+ PIN_SLP(gpk0-5, PREV, NONE);
+ PIN_SLP(gpk0-6, PREV, NONE);
+
+ PIN_SLP(gpk1-0, INPUT, DOWN);
+ PIN_SLP(gpk1-1, INPUT, DOWN);
+ PIN_SLP(gpk1-2, INPUT, DOWN);
+ PIN_SLP(gpk1-3, PREV, NONE);
+ PIN_SLP(gpk1-4, PREV, NONE);
+ PIN_SLP(gpk1-5, PREV, NONE);
+ PIN_SLP(gpk1-6, PREV, NONE);
+
+ PIN_SLP(gpk2-0, INPUT, DOWN);
+ PIN_SLP(gpk2-1, INPUT, DOWN);
+ PIN_SLP(gpk2-2, INPUT, DOWN);
+ PIN_SLP(gpk2-3, INPUT, DOWN);
+ PIN_SLP(gpk2-4, INPUT, DOWN);
+ PIN_SLP(gpk2-5, INPUT, DOWN);
+ PIN_SLP(gpk2-6, INPUT, DOWN);
+
+ PIN_SLP(gpk3-0, OUT0, NONE);
+ PIN_SLP(gpk3-1, INPUT, NONE);
+ PIN_SLP(gpk3-2, INPUT, DOWN);
+ PIN_SLP(gpk3-3, INPUT, NONE);
+ PIN_SLP(gpk3-4, INPUT, NONE);
+ PIN_SLP(gpk3-5, INPUT, NONE);
+ PIN_SLP(gpk3-6, INPUT, NONE);
+
+ PIN_SLP(gpl0-0, INPUT, DOWN);
+ PIN_SLP(gpl0-1, INPUT, DOWN);
+ PIN_SLP(gpl0-2, INPUT, DOWN);
+ PIN_SLP(gpl0-3, INPUT, DOWN);
+ PIN_SLP(gpl0-4, PREV, NONE);
+ PIN_SLP(gpl0-6, PREV, NONE);
+
+ PIN_SLP(gpl1-0, INPUT, DOWN);
+ PIN_SLP(gpl1-1, INPUT, DOWN);
+ PIN_SLP(gpl2-0, INPUT, DOWN);
+ PIN_SLP(gpl2-1, INPUT, DOWN);
+ PIN_SLP(gpl2-2, INPUT, DOWN);
+ PIN_SLP(gpl2-3, INPUT, DOWN);
+ PIN_SLP(gpl2-4, INPUT, DOWN);
+ PIN_SLP(gpl2-5, INPUT, DOWN);
+ PIN_SLP(gpl2-6, PREV, NONE);
+ PIN_SLP(gpl2-7, INPUT, DOWN);
+
+ PIN_SLP(gpm0-0, INPUT, DOWN);
+ PIN_SLP(gpm0-1, INPUT, DOWN);
+ PIN_SLP(gpm0-2, INPUT, DOWN);
+ PIN_SLP(gpm0-3, INPUT, DOWN);
+ PIN_SLP(gpm0-4, INPUT, DOWN);
+ PIN_SLP(gpm0-5, INPUT, DOWN);
+ PIN_SLP(gpm0-6, INPUT, DOWN);
+ PIN_SLP(gpm0-7, INPUT, DOWN);
+
+ PIN_SLP(gpm1-0, INPUT, DOWN);
+ PIN_SLP(gpm1-1, INPUT, DOWN);
+ PIN_SLP(gpm1-2, INPUT, NONE);
+ PIN_SLP(gpm1-3, INPUT, NONE);
+ PIN_SLP(gpm1-4, INPUT, NONE);
+ PIN_SLP(gpm1-5, INPUT, NONE);
+ PIN_SLP(gpm1-6, INPUT, DOWN);
+
+ PIN_SLP(gpm2-0, INPUT, NONE);
+ PIN_SLP(gpm2-1, INPUT, NONE);
+ PIN_SLP(gpm2-2, INPUT, DOWN);
+ PIN_SLP(gpm2-3, INPUT, DOWN);
+ PIN_SLP(gpm2-4, INPUT, DOWN);
+
+ PIN_SLP(gpm3-0, PREV, NONE);
+ PIN_SLP(gpm3-1, PREV, NONE);
+ PIN_SLP(gpm3-2, PREV, NONE);
+ PIN_SLP(gpm3-3, OUT1, NONE);
+ PIN_SLP(gpm3-4, INPUT, DOWN);
+ PIN_SLP(gpm3-5, INPUT, DOWN);
+ PIN_SLP(gpm3-6, INPUT, DOWN);
+ PIN_SLP(gpm3-7, INPUT, DOWN);
+
+ PIN_SLP(gpm4-0, INPUT, DOWN);
+ PIN_SLP(gpm4-1, INPUT, DOWN);
+ PIN_SLP(gpm4-2, INPUT, DOWN);
+ PIN_SLP(gpm4-3, INPUT, DOWN);
+ PIN_SLP(gpm4-4, INPUT, DOWN);
+ PIN_SLP(gpm4-5, INPUT, DOWN);
+ PIN_SLP(gpm4-6, INPUT, DOWN);
+ PIN_SLP(gpm4-7, INPUT, DOWN);
+
+ PIN_SLP(gpy0-0, INPUT, DOWN);
+ PIN_SLP(gpy0-1, INPUT, DOWN);
+ PIN_SLP(gpy0-2, INPUT, DOWN);
+ PIN_SLP(gpy0-3, INPUT, DOWN);
+ PIN_SLP(gpy0-4, INPUT, DOWN);
+ PIN_SLP(gpy0-5, INPUT, DOWN);
+
+ PIN_SLP(gpy1-0, INPUT, DOWN);
+ PIN_SLP(gpy1-1, INPUT, DOWN);
+ PIN_SLP(gpy1-2, INPUT, DOWN);
+ PIN_SLP(gpy1-3, INPUT, DOWN);
+
+ PIN_SLP(gpy2-0, PREV, NONE);
+ PIN_SLP(gpy2-1, INPUT, DOWN);
+ PIN_SLP(gpy2-2, INPUT, NONE);
+ PIN_SLP(gpy2-3, INPUT, NONE);
+ PIN_SLP(gpy2-4, INPUT, NONE);
+ PIN_SLP(gpy2-5, INPUT, NONE);
+
+ PIN_SLP(gpy3-0, INPUT, DOWN);
+ PIN_SLP(gpy3-1, INPUT, DOWN);
+ PIN_SLP(gpy3-2, INPUT, DOWN);
+ PIN_SLP(gpy3-3, INPUT, DOWN);
+ PIN_SLP(gpy3-4, INPUT, DOWN);
+ PIN_SLP(gpy3-5, INPUT, DOWN);
+ PIN_SLP(gpy3-6, INPUT, DOWN);
+ PIN_SLP(gpy3-7, INPUT, DOWN);
+
+ PIN_SLP(gpy4-0, INPUT, DOWN);
+ PIN_SLP(gpy4-1, INPUT, DOWN);
+ PIN_SLP(gpy4-2, INPUT, DOWN);
+ PIN_SLP(gpy4-3, INPUT, DOWN);
+ PIN_SLP(gpy4-4, INPUT, DOWN);
+ PIN_SLP(gpy4-5, INPUT, DOWN);
+ PIN_SLP(gpy4-6, INPUT, DOWN);
+ PIN_SLP(gpy4-7, INPUT, DOWN);
+
+ PIN_SLP(gpy5-0, INPUT, DOWN);
+ PIN_SLP(gpy5-1, INPUT, DOWN);
+ PIN_SLP(gpy5-2, INPUT, DOWN);
+ PIN_SLP(gpy5-3, INPUT, DOWN);
+ PIN_SLP(gpy5-4, INPUT, DOWN);
+ PIN_SLP(gpy5-5, INPUT, DOWN);
+ PIN_SLP(gpy5-6, INPUT, DOWN);
+ PIN_SLP(gpy5-7, INPUT, DOWN);
+
+ PIN_SLP(gpy6-0, INPUT, DOWN);
+ PIN_SLP(gpy6-1, INPUT, DOWN);
+ PIN_SLP(gpy6-2, INPUT, DOWN);
+ PIN_SLP(gpy6-3, INPUT, DOWN);
+ PIN_SLP(gpy6-4, INPUT, DOWN);
+ PIN_SLP(gpy6-5, INPUT, DOWN);
+ PIN_SLP(gpy6-6, INPUT, DOWN);
+ PIN_SLP(gpy6-7, INPUT, DOWN);
+ };
+};
+
+&pinctrl_2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sleep2>;
+
+ sleep2: sleep-states {
+ PIN_SLP(gpz-0, INPUT, DOWN);
+ PIN_SLP(gpz-1, INPUT, DOWN);
+ PIN_SLP(gpz-2, INPUT, DOWN);
+ PIN_SLP(gpz-3, INPUT, DOWN);
+ PIN_SLP(gpz-4, INPUT, DOWN);
+ PIN_SLP(gpz-5, INPUT, DOWN);
+ PIN_SLP(gpz-6, INPUT, DOWN);
+ };
+};
+
+&pinctrl_3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&sleep3>;
+
+ sleep3: sleep-states {
+ PIN_SLP(gpv0-0, INPUT, DOWN);
+ PIN_SLP(gpv0-1, INPUT, DOWN);
+ PIN_SLP(gpv0-2, INPUT, DOWN);
+ PIN_SLP(gpv0-3, INPUT, DOWN);
+ PIN_SLP(gpv0-4, INPUT, DOWN);
+ PIN_SLP(gpv0-5, INPUT, DOWN);
+ PIN_SLP(gpv0-6, INPUT, DOWN);
+ PIN_SLP(gpv0-7, INPUT, DOWN);
+
+ PIN_SLP(gpv1-0, INPUT, DOWN);
+ PIN_SLP(gpv1-1, INPUT, DOWN);
+ PIN_SLP(gpv1-2, INPUT, DOWN);
+ PIN_SLP(gpv1-3, INPUT, DOWN);
+ PIN_SLP(gpv1-4, INPUT, DOWN);
+ PIN_SLP(gpv1-5, INPUT, DOWN);
+ PIN_SLP(gpv1-6, INPUT, DOWN);
+ PIN_SLP(gpv1-7, INPUT, DOWN);
+
+ PIN_SLP(gpv2-0, INPUT, DOWN);
+ PIN_SLP(gpv2-1, INPUT, DOWN);
+ PIN_SLP(gpv2-2, INPUT, DOWN);
+ PIN_SLP(gpv2-3, INPUT, DOWN);
+ PIN_SLP(gpv2-4, INPUT, DOWN);
+ PIN_SLP(gpv2-5, INPUT, DOWN);
+ PIN_SLP(gpv2-6, INPUT, DOWN);
+ PIN_SLP(gpv2-7, INPUT, DOWN);
+
+ PIN_SLP(gpv3-0, INPUT, DOWN);
+ PIN_SLP(gpv3-1, INPUT, DOWN);
+ PIN_SLP(gpv3-2, INPUT, DOWN);
+ PIN_SLP(gpv3-3, INPUT, DOWN);
+ PIN_SLP(gpv3-4, INPUT, DOWN);
+ PIN_SLP(gpv3-5, INPUT, DOWN);
+ PIN_SLP(gpv3-6, INPUT, DOWN);
+ PIN_SLP(gpv3-7, INPUT, DOWN);
+
+ PIN_SLP(gpv4-0, INPUT, DOWN);
+ };
+};
/ {
compatible = "samsung,exynos4412", "samsung,exynos4";
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@A00 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xA00>;
+ };
+
+ cpu@A01 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xA01>;
+ };
+
+ cpu@A02 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xA02>;
+ };
+
+ cpu@A03 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xA03>;
+ };
+ };
+
combiner: interrupt-controller@10440000 {
samsung,combiner-nr = <20>;
};
--- /dev/null
+/*
+ * Samsung's Exynos4415 SoCs pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *
+ * Samsung's Exynos4415 SoCs pin-mux and pin-config optiosn are listed as device
+ * tree nodes are listed in this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+&pinctrl_0 {
+ gpa0: gpa0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpa1: gpa1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpb: gpb {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc0: gpc0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpc1: gpc1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd0: gpd0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpd1: gpd1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf0: gpf0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf1: gpf1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpf2: gpf2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ uart0_data: uart0-data {
+ samsung,pins = "gpa0-0", "gpa0-1";
+ samsung,pin-function = <0x2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart0_fctl: uart0-fctl {
+ samsung,pins = "gpa0-2", "gpa0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart1_data: uart1-data {
+ samsung,pins = "gpa0-4", "gpa0-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart1_fctl: uart1-fctl {
+ samsung,pins = "gpa0-6", "gpa0-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart2_data: uart2-data {
+ samsung,pins = "gpa1-0", "gpa1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart2_fctl: uart2-fctl {
+ samsung,pins = "gpa1-2", "gpa1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ uart3_data: uart3-data {
+ samsung,pins = "gpa1-4", "gpa1-5";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c2_bus: i2c2-bus {
+ samsung,pins = "gpa0-6", "gpa0-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c3_bus: i2c3-bus {
+ samsung,pins = "gpa1-2", "gpa1-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi0_bus: spi0-bus {
+ samsung,pins = "gpb-0", "gpb-2", "gpb-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c4_bus: i2c4-bus {
+ samsung,pins = "gpb-0", "gpb-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi1_bus: spi1-bus {
+ samsung,pins = "gpb-4", "gpb-6", "gpb-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c5_bus: i2c5-bus {
+ samsung,pins = "gpb-2", "gpb-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2s1_bus: i2s1-bus {
+ samsung,pins = "gpc0-0", "gpc0-1", "gpc0-2", "gpc0-3",
+ "gpc0-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2s2_bus: i2s2-bus {
+ samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+ "gpc1-4";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pcm2_bus: pcm2-bus {
+ samsung,pins = "gpc1-0", "gpc1-1", "gpc1-2", "gpc1-3",
+ "gpc1-4";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c6_bus: i2c6-bus {
+ samsung,pins = "gpc1-3", "gpc1-4";
+ samsung,pin-function = <4>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ spi2_bus: spi2-bus {
+ samsung,pins = "gpc1-1", "gpc1-3", "gpc1-4";
+ samsung,pin-function = <5>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm0_out: pwm0-out {
+ samsung,pins = "gpd0-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm1_out: pwm1-out {
+ samsung,pins = "gpd0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm2_out: pwm2-out {
+ samsung,pins = "gpd0-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ pwm3_out: pwm3-out {
+ samsung,pins = "gpd0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c7_bus: i2c7-bus {
+ samsung,pins = "gpd0-2", "gpd0-3";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c0_bus: i2c0-bus {
+ samsung,pins = "gpd1-0", "gpd1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ i2c1_bus: i2c1-bus {
+ samsung,pins = "gpd1-2", "gpd1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_1 {
+ gpk0: gpk0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpk1: gpk1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpk2: gpk2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpk3: gpk3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpl0: gpl0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpm0: gpm0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpm1: gpm1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpm2: gpm2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpm3: gpm3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpm4: gpm4 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpx0: gpx0 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <0 32 0>, <0 33 0>, <0 34 0>, <0 35 0>,
+ <0 36 0>, <0 37 0>, <0 38 0>, <0 39 0>;
+ #interrupt-cells = <2>;
+ };
+
+ gpx1: gpx1 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ interrupt-parent = <&gic>;
+ interrupts = <0 40 0>, <0 41 0>, <0 42 0>, <0 43 0>,
+ <0 44 0>, <0 45 0>, <0 46 0>, <0 47 0>;
+ #interrupt-cells = <2>;
+ };
+
+ gpx2: gpx2 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpx3: gpx3 {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ sd0_clk: sd0-clk {
+ samsung,pins = "gpk0-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_cmd: sd0-cmd {
+ samsung,pins = "gpk0-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_cd: sd0-cd {
+ samsung,pins = "gpk0-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_rdqs: sd0-rdqs {
+ samsung,pins = "gpk0-7";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus1: sd0-bus-width1 {
+ samsung,pins = "gpk0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus4: sd0-bus-width4 {
+ samsung,pins = "gpk0-4", "gpk0-5", "gpk0-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd0_bus8: sd0-bus-width8 {
+ samsung,pins = "gpl0-0", "gpl0-1", "gpl0-2", "gpl0-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_clk: sd1-clk {
+ samsung,pins = "gpk1-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_cmd: sd1-cmd {
+ samsung,pins = "gpk1-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_cd: sd1-cd {
+ samsung,pins = "gpk1-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_bus1: sd1-bus-width1 {
+ samsung,pins = "gpk1-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd1_bus4: sd1-bus-width4 {
+ samsung,pins = "gpk1-4", "gpk1-5", "gpk1-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_clk: sd2-clk {
+ samsung,pins = "gpk2-0";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <4>;
+ };
+
+ sd2_cmd: sd2-cmd {
+ samsung,pins = "gpk2-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <4>;
+ };
+
+ sd2_cd: sd2-cd {
+ samsung,pins = "gpk2-2";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <3>;
+ };
+
+ sd2_bus1: sd2-bus-width1 {
+ samsung,pins = "gpk2-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <4>;
+ };
+
+ sd2_bus4: sd2-bus-width4 {
+ samsung,pins = "gpk2-4", "gpk2-5", "gpk2-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <4>;
+ };
+
+ cam_port_b_io: cam-port-b-io {
+ samsung,pins = "gpm0-0", "gpm0-1", "gpm0-2", "gpm0-3",
+ "gpm0-4", "gpm0-5", "gpm0-6", "gpm0-7",
+ "gpm1-0", "gpm1-1", "gpm2-0", "gpm2-1";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ cam_port_b_clk_active: cam-port-b-clk-active {
+ samsung,pins = "gpm2-2";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <3>;
+ };
+
+ cam_port_b_clk_idle: cam-port-b-clk-idle {
+ samsung,pins = "gpm2-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ fimc_is_i2c0: fimc-is-i2c0 {
+ samsung,pins = "gpm4-0", "gpm4-1";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ fimc_is_i2c1: fimc-is-i2c1 {
+ samsung,pins = "gpm4-2", "gpm4-3";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ fimc_is_uart: fimc-is-uart {
+ samsung,pins = "gpm3-5", "gpm3-7";
+ samsung,pin-function = <3>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_2 {
+ gpz: gpz {
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ i2s0_bus: i2s0-bus {
+ samsung,pins = "gpz-0", "gpz-1", "gpz-2", "gpz-3",
+ "gpz-4", "gpz-5", "gpz-6";
+ samsung,pin-function = <2>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
--- /dev/null
+/*
+ * Samsung's Exynos4415 SoC device tree source
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *
+ * Samsung's Exynos4415 SoC device nodes are listed in this file. Exynos4415
+ * based board files can include this file and provide values for board
+ * specific bindings.
+ *
+ * Note: This file does not include device nodes for all the controllers in
+ * Exynos4415 SoC. As device tree coverage for Exynos4415 increases, additional
+ * nodes can be added to this file.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/exynos4415.h>
+#include <dt-bindings/clock/exynos-audss-clk.h>
+
+/ {
+ compatible = "samsung,exynos4415";
+ interrupt-parent = <&gic>;
+
+ aliases {
+ pinctrl0 = &pinctrl_0;
+ pinctrl1 = &pinctrl_1;
+ pinctrl2 = &pinctrl_2;
+ mshc0 = &mshc_0;
+ mshc1 = &mshc_1;
+ mshc2 = &mshc_2;
+ spi0 = &spi_0;
+ spi1 = &spi_1;
+ spi2 = &spi_2;
+ i2c0 = &i2c_0;
+ i2c1 = &i2c_1;
+ i2c2 = &i2c_2;
+ i2c3 = &i2c_3;
+ i2c4 = &i2c_4;
+ i2c5 = &i2c_5;
+ i2c6 = &i2c_6;
+ i2c7 = &i2c_7;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@a00 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xa00>;
+ clock-frequency = <1600000000>;
+ };
+
+ cpu1: cpu@a01 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xa01>;
+ clock-frequency = <1600000000>;
+ };
+
+ cpu2: cpu@a02 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xa02>;
+ clock-frequency = <1600000000>;
+ };
+
+ cpu3: cpu@a03 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0xa03>;
+ clock-frequency = <1600000000>;
+ };
+ };
+
+ soc: soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ sysram@02020000 {
+ compatible = "mmio-sram";
+ reg = <0x02020000 0x50000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x02020000 0x50000>;
+
+ smp-sysram@0 {
+ compatible = "samsung,exynos4210-sysram";
+ reg = <0x0 0x1000>;
+ };
+
+ smp-sysram@4f000 {
+ compatible = "samsung,exynos4210-sysram-ns";
+ reg = <0x4f000 0x1000>;
+ };
+ };
+
+ pinctrl_2: pinctrl@03860000 {
+ compatible = "samsung,exynos4415-pinctrl";
+ reg = <0x03860000 0x1000>;
+ interrupts = <0 242 0>;
+ };
+
+ chipid@10000000 {
+ compatible = "samsung,exynos4210-chipid";
+ reg = <0x10000000 0x100>;
+ };
+
+ sysreg_system_controller: syscon@10010000 {
+ compatible = "samsung,exynos4-sysreg", "syscon";
+ reg = <0x10010000 0x400>;
+ };
+
+ pmu_system_controller: system-controller@10020000 {
+ compatible = "samsung,exynos4415-pmu", "syscon";
+ reg = <0x10020000 0x4000>;
+ };
+
+ mipi_phy: video-phy@10020710 {
+ compatible = "samsung,s5pv210-mipi-video-phy";
+ reg = <0x10020710 8>;
+ #phy-cells = <1>;
+ };
+
+ pd_cam: cam-power-domain@10024000 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10024000 0x20>;
+ };
+
+ pd_tv: tv-power-domain@10024020 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10024020 0x20>;
+ };
+
+ pd_mfc: mfc-power-domain@10024040 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10024040 0x20>;
+ };
+
+ pd_g3d: g3d-power-domain@10024060 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10024060 0x20>;
+ };
+
+ pd_lcd0: lcd0-power-domain@10024080 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x10024080 0x20>;
+ };
+
+ pd_isp0: isp0-power-domain@100240A0 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x100240A0 0x20>;
+ };
+
+ pd_isp1: isp1-power-domain@100240E0 {
+ compatible = "samsung,exynos4210-pd";
+ reg = <0x100240E0 0x20>;
+ };
+
+ cmu: clock-controller@10030000 {
+ compatible = "samsung,exynos4415-cmu";
+ reg = <0x10030000 0x18000>;
+ #clock-cells = <1>;
+ };
+
+ rtc: rtc@10070000 {
+ compatible = "samsung,exynos3250-rtc";
+ reg = <0x10070000 0x100>;
+ interrupts = <0 73 0>, <0 74 0>;
+ status = "disabled";
+ };
+
+ mct@10050000 {
+ compatible = "samsung,exynos4210-mct";
+ reg = <0x10050000 0x800>;
+ interrupts = <0 218 0>, <0 219 0>, <0 220 0>, <0 221 0>,
+ <0 223 0>, <0 226 0>, <0 227 0>, <0 228 0>;
+ clocks = <&cmu CLK_FIN_PLL>, <&cmu CLK_MCT>;
+ clock-names = "fin_pll", "mct";
+ };
+
+ gic: interrupt-controller@10481000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x10481000 0x1000>,
+ <0x10482000 0x1000>,
+ <0x10484000 0x2000>,
+ <0x10486000 0x2000>;
+ interrupts = <1 9 0xf04>;
+ };
+
+ l2c: l2-cache-controller@10502000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x10502000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ arm,tag-latency = <2 2 1>;
+ arm,data-latency = <3 2 1>;
+ arm,double-linefill = <1>;
+ arm,double-linefill-incr = <0>;
+ arm,double-linefill-wrap = <1>;
+ arm,prefetch-drop = <1>;
+ arm,prefetch-offset = <7>;
+ };
+
+ cmu_dmc: clock-controller@105C0000 {
+ compatible = "samsung,exynos4415-cmu-dmc";
+ reg = <0x105C0000 0x3000>;
+ #clock-cells = <1>;
+ };
+
+ pinctrl_1: pinctrl@11000000 {
+ compatible = "samsung,exynos4415-pinctrl";
+ reg = <0x11000000 0x1000>;
+ interrupts = <0 225 0>;
+
+ wakeup-interrupt-controller {
+ compatible = "samsung,exynos4210-wakeup-eint";
+ interrupt-parent = <&gic>;
+ interrupts = <0 48 0>;
+ };
+ };
+
+ pinctrl_0: pinctrl@11400000 {
+ compatible = "samsung,exynos4415-pinctrl";
+ reg = <0x11400000 0x1000>;
+ interrupts = <0 240 0>;
+ };
+
+ hsotg: hsotg@12480000 {
+ compatible = "samsung,s3c6400-hsotg";
+ reg = <0x12480000 0x20000>;
+ interrupts = <0 141 0>;
+ clocks = <&cmu CLK_USBDEVICE>;
+ clock-names = "otg";
+ phys = <&exynos_usbphy 0>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ mshc_0: mshc@12510000 {
+ compatible = "samsung,exynos5250-dw-mshc";
+ reg = <0x12510000 0x1000>;
+ interrupts = <0 142 0>;
+ clocks = <&cmu CLK_SDMMC0>, <&cmu CLK_SCLK_MMC0>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ mshc_1: mshc@12520000 {
+ compatible = "samsung,exynos5250-dw-mshc";
+ reg = <0x12520000 0x1000>;
+ interrupts = <0 143 0>;
+ clocks = <&cmu CLK_SDMMC1>, <&cmu CLK_SCLK_MMC1>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ mshc_2: mshc@12530000 {
+ compatible = "samsung,exynos5250-dw-mshc";
+ reg = <0x12530000 0x1000>;
+ interrupts = <0 144 0>;
+ clocks = <&cmu CLK_SDMMC2>, <&cmu CLK_SCLK_MMC2>;
+ clock-names = "biu", "ciu";
+ fifo-depth = <0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ ehci: ehci@12580000 {
+ compatible = "samsung,exynos4210-ehci";
+ reg = <0x12580000 0x100>;
+ interrupts = <0 140 0>;
+ clocks = <&cmu CLK_USBHOST>;
+ clock-names = "usbhost";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ phys = <&exynos_usbphy 1>;
+ status = "disabled";
+ };
+ port@1 {
+ reg = <1>;
+ phys = <&exynos_usbphy 2>;
+ status = "disabled";
+ };
+ port@2 {
+ reg = <2>;
+ phys = <&exynos_usbphy 3>;
+ status = "disabled";
+ };
+ };
+
+ ohci: ohci@12590000 {
+ compatible = "samsung,exynos4210-ohci";
+ reg = <0x12590000 0x100>;
+ interrupts = <0 140 0>;
+ clocks = <&cmu CLK_USBHOST>;
+ clock-names = "usbhost";
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ phys = <&exynos_usbphy 1>;
+ status = "disabled";
+ };
+ };
+
+ exynos_usbphy: exynos-usbphy@125B0000 {
+ compatible = "samsung,exynos4x12-usb2-phy";
+ reg = <0x125B0000 0x100>;
+ samsung,pmureg-phandle = <&pmu_system_controller>;
+ samsung,sysreg-phandle = <&sysreg_system_controller>;
+ clocks = <&cmu CLK_USBDEVICE>, <&xusbxti>;
+ clock-names = "phy", "ref";
+ #phy-cells = <1>;
+ status = "disabled";
+ };
+
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&gic>;
+ ranges;
+
+ pdma0: pdma@12680000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x12680000 0x1000>;
+ interrupts = <0 138 0>;
+ clocks = <&cmu CLK_PDMA0>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+
+ pdma1: pdma@12690000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x12690000 0x1000>;
+ interrupts = <0 139 0>;
+ clocks = <&cmu CLK_PDMA1>;
+ clock-names = "apb_pclk";
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+ };
+
+ adc: adc@126C0000 {
+ compatible = "samsung,exynos3250-adc",
+ "samsung,exynos-adc-v2";
+ reg = <0x126C0000 0x100>, <0x10020718 0x4>;
+ interrupts = <0 137 0>;
+ clock-names = "adc", "sclk";
+ clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
+ #io-channel-cells = <1>;
+ io-channel-ranges;
+ status = "disabled";
+ };
+
+ serial_0: serial@13800000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13800000 0x100>;
+ interrupts = <0 109 0>;
+ clocks = <&cmu CLK_UART0>, <&cmu CLK_SCLK_UART0>;
+ clock-names = "uart", "clk_uart_baud0";
+ status = "disabled";
+ };
+
+ serial_1: serial@13810000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13810000 0x100>;
+ interrupts = <0 110 0>;
+ clocks = <&cmu CLK_UART1>, <&cmu CLK_SCLK_UART1>;
+ clock-names = "uart", "clk_uart_baud0";
+ status = "disabled";
+ };
+
+ serial_2: serial@13820000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13820000 0x100>;
+ interrupts = <0 111 0>;
+ clocks = <&cmu CLK_UART2>, <&cmu CLK_SCLK_UART2>;
+ clock-names = "uart", "clk_uart_baud0";
+ status = "disabled";
+ };
+
+ serial_3: serial@13830000 {
+ compatible = "samsung,exynos4210-uart";
+ reg = <0x13830000 0x100>;
+ interrupts = <0 112 0>;
+ clocks = <&cmu CLK_UART3>, <&cmu CLK_SCLK_UART3>;
+ clock-names = "uart", "clk_uart_baud0";
+ status = "disabled";
+ };
+
+ i2c_0: i2c@13860000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13860000 0x100>;
+ interrupts = <0 113 0>;
+ clocks = <&cmu CLK_I2C0>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_bus>;
+ status = "disabled";
+ };
+
+ i2c_1: i2c@13870000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13870000 0x100>;
+ interrupts = <0 114 0>;
+ clocks = <&cmu CLK_I2C1>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_bus>;
+ status = "disabled";
+ };
+
+ i2c_2: i2c@13880000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13880000 0x100>;
+ interrupts = <0 115 0>;
+ clocks = <&cmu CLK_I2C2>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_bus>;
+ status = "disabled";
+ };
+
+ i2c_3: i2c@13890000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x13890000 0x100>;
+ interrupts = <0 116 0>;
+ clocks = <&cmu CLK_I2C3>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_bus>;
+ status = "disabled";
+ };
+
+ i2c_4: i2c@138A0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x138A0000 0x100>;
+ interrupts = <0 117 0>;
+ clocks = <&cmu CLK_I2C4>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c4_bus>;
+ status = "disabled";
+ };
+
+ i2c_5: i2c@138B0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x138B0000 0x100>;
+ interrupts = <0 118 0>;
+ clocks = <&cmu CLK_I2C5>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c5_bus>;
+ status = "disabled";
+ };
+
+ i2c_6: i2c@138C0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x138C0000 0x100>;
+ interrupts = <0 119 0>;
+ clocks = <&cmu CLK_I2C6>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c6_bus>;
+ status = "disabled";
+ };
+
+ i2c_7: i2c@138D0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "samsung,s3c2440-i2c";
+ reg = <0x138D0000 0x100>;
+ interrupts = <0 120 0>;
+ clocks = <&cmu CLK_I2C7>;
+ clock-names = "i2c";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c7_bus>;
+ status = "disabled";
+ };
+
+ spi_0: spi@13920000 {
+ compatible = "samsung,exynos4210-spi";
+ reg = <0x13920000 0x100>;
+ interrupts = <0 121 0>;
+ dmas = <&pdma0 7>, <&pdma0 6>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu CLK_SPI0>, <&cmu CLK_SCLK_SPI0>;
+ clock-names = "spi", "spi_busclk0";
+ samsung,spi-src-clk = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_bus>;
+ status = "disabled";
+ };
+
+ spi_1: spi@13930000 {
+ compatible = "samsung,exynos4210-spi";
+ reg = <0x13930000 0x100>;
+ interrupts = <0 122 0>;
+ dmas = <&pdma1 7>, <&pdma1 6>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu CLK_SPI1>, <&cmu CLK_SCLK_SPI1>;
+ clock-names = "spi", "spi_busclk0";
+ samsung,spi-src-clk = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi1_bus>;
+ status = "disabled";
+ };
+
+ spi_2: spi@13940000 {
+ compatible = "samsung,exynos4210-spi";
+ reg = <0x13940000 0x100>;
+ interrupts = <0 123 0>;
+ dmas = <&pdma0 9>, <&pdma0 8>;
+ dma-names = "tx", "rx";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&cmu CLK_SPI2>, <&cmu CLK_SCLK_SPI2>;
+ clock-names = "spi", "spi_busclk0";
+ samsung,spi-src-clk = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi2_bus>;
+ status = "disabled";
+ };
+
+ clock_audss: clock-controller@03810000 {
+ compatible = "samsung,exynos4210-audss-clock";
+ reg = <0x03810000 0x0C>;
+ #clock-cells = <1>;
+ };
+
+ i2s0: i2s@3830000 {
+ compatible = "samsung,s5pv210-i2s";
+ reg = <0x03830000 0x100>;
+ interrupts = <0 124 0>;
+ clocks = <&clock_audss EXYNOS_I2S_BUS>,
+ <&clock_audss EXYNOS_SCLK_I2S>;
+ clock-names = "iis", "i2s_opclk0";
+ dmas = <&pdma1 10>, <&pdma1 9>, <&pdma1 8>;
+ dma-names = "tx", "rx", "tx-sec";
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_bus>;
+ samsung,idma-addr = <0x03000000>;
+ status = "disabled";
+ };
+
+ pwm: pwm@139D0000 {
+ compatible = "samsung,exynos4210-pwm";
+ reg = <0x139D0000 0x1000>;
+ interrupts = <0 104 0>, <0 105 0>, <0 106 0>,
+ <0 107 0>, <0 108 0>;
+ #pwm-cells = <3>;
+ status = "disabled";
+ };
+
+ pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <0 18 0>, <0 19 0>, <0 20 0>, <0 21 0>;
+ };
+ };
+};
+
+#include "exynos4415-pinctrl.dtsi"
* published by the Free Software Foundation.
*/
+#define PIN_PULL_NONE 0
+#define PIN_PULL_DOWN 1
+#define PIN_PULL_UP 3
+
+#define PIN_PDN_OUT0 0
+#define PIN_PDN_OUT1 1
+#define PIN_PDN_INPUT 2
+#define PIN_PDN_PREV 3
+
+#define PIN_SLP(_pin, _mode, _pull) \
+ _pin { \
+ samsung,pins = #_pin; \
+ samsung,pin-con-pdn = <PIN_PDN_ ##_mode>; \
+ samsung,pin-pud-pdn = <PIN_PULL_ ##_pull>; \
+ }
+
/ {
pinctrl@11400000 {
gpa0: gpa0 {
compatible = "samsung,exynos4x12-usb2-phy";
samsung,sysreg-phandle = <&sys_reg>;
};
+
+ tmu@100C0000 {
+ compatible = "samsung,exynos4412-tmu";
+ interrupt-parent = <&combiner>;
+ interrupts = <2 4>;
+ reg = <0x100C0000 0x100>;
+ clocks = <&clock 383>;
+ clock-names = "tmu_apbif";
+ status = "disabled";
+ };
};
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
/dts-v1/;
-#include "exynos5250.dtsi"
+#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/input/input.h>
+#include "exynos5250.dtsi"
/ {
model = "Insignal Arndale evaluation board based on EXYNOS5250";
bootargs = "console=ttySAC2,115200";
};
- rtc@101E0000 {
- status = "okay";
- };
-
- codec@11000000 {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
- };
-
- i2c@12C60000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <20000>;
- samsung,i2c-slave-addr = <0x66>;
- status = "okay";
-
- s5m8767_pmic@66 {
- compatible = "samsung,s5m8767-pmic";
- reg = <0x66>;
- interrupt-parent = <&gpx3>;
- interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
-
- vinb1-supply = <&main_dc_reg>;
- vinb2-supply = <&main_dc_reg>;
- vinb3-supply = <&main_dc_reg>;
- vinb4-supply = <&main_dc_reg>;
- vinb5-supply = <&main_dc_reg>;
- vinb6-supply = <&main_dc_reg>;
- vinb7-supply = <&main_dc_reg>;
- vinb8-supply = <&main_dc_reg>;
- vinb9-supply = <&main_dc_reg>;
-
- vinl1-supply = <&buck7_reg>;
- vinl2-supply = <&buck7_reg>;
- vinl3-supply = <&buck7_reg>;
- vinl4-supply = <&main_dc_reg>;
- vinl5-supply = <&main_dc_reg>;
- vinl6-supply = <&main_dc_reg>;
- vinl7-supply = <&main_dc_reg>;
- vinl8-supply = <&buck8_reg>;
- vinl9-supply = <&buck8_reg>;
-
- s5m8767,pmic-buck2-dvs-voltage = <1300000>;
- s5m8767,pmic-buck3-dvs-voltage = <1100000>;
- s5m8767,pmic-buck4-dvs-voltage = <1200000>;
- s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 0>,
- <&gpd1 1 0>,
- <&gpd1 2 0>;
- s5m8767,pmic-buck-ds-gpios = <&gpx2 3 0>,
- <&gpx2 4 0>,
- <&gpx2 5 0>;
- regulators {
- ldo1_reg: LDO1 {
- regulator-name = "VDD_ALIVE_1.0V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "VDD_28IO_DP_1.35V";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "VDD_COMMON1_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "VDD_IOPERI_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- op_mode = <1>;
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "VDD_EXT_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "VDD_MPLL_1.1V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "VDD_XPLL_1.1V";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "VDD_COMMON2_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo9_reg: LDO9 {
- regulator-name = "VDD_33ON_3.0V";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- op_mode = <1>;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "VDD_COMMON3_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "VDD_ABB2_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "VDD_USB_3.0V";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "VDDQ_C2C_W_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo14_reg: LDO14 {
- regulator-name = "VDD18_ABB0_3_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "VDD10_COMMON4_1.0V";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "VDD18_HSIC_1.8V";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo17_reg: LDO17 {
- regulator-name = "VDDQ_MMC2_3_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- ldo18_reg: LDO18 {
- regulator-name = "VDD_33ON_2.8V";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- op_mode = <1>;
- };
-
- ldo22_reg: LDO22 {
- regulator-name = "EXT_33_OFF";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- op_mode = <1>;
- };
-
- ldo23_reg: LDO23 {
- regulator-name = "EXT_28_OFF";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- op_mode = <1>;
- };
-
- ldo25_reg: LDO25 {
- regulator-name = "PVDD_LDO25";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- op_mode = <1>;
- };
-
- ldo26_reg: LDO26 {
- regulator-name = "EXT_18_OFF";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- op_mode = <1>;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <912500>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "VDD_MEM_1.35V";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1355000>;
- regulator-always-on;
- regulator-boot-on;
- op_mode = <1>;
- };
-
- buck7_reg: BUCK7 {
- regulator-name = "PVDD_BUCK7";
- regulator-always-on;
- op_mode = <1>;
- };
-
- buck8_reg: BUCK8 {
- regulator-name = "PVDD_BUCK8";
- regulator-always-on;
- op_mode = <1>;
- };
-
- buck9_reg: BUCK9 {
- regulator-name = "VDD_33_OFF_EXT1";
- regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <3000000>;
- op_mode = <1>;
- };
- };
- };
- };
-
- i2c@12C80000 {
- status = "okay";
-
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- samsung,i2c-slave-addr = <0x50>;
-
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
- };
-
- i2c@12C90000 {
- status = "okay";
-
- wm1811a@1a {
-
- compatible = "wlf,wm1811";
- reg = <0x1a>;
-
- AVDD2-supply = <&main_dc_reg>;
- CPVDD-supply = <&main_dc_reg>;
- DBVDD1-supply = <&main_dc_reg>;
- DBVDD2-supply = <&main_dc_reg>;
- DBVDD3-supply = <&main_dc_reg>;
- LDO1VDD-supply = <&main_dc_reg>;
- SPKVDD1-supply = <&main_dc_reg>;
- SPKVDD2-supply = <&main_dc_reg>;
-
- wlf,ldo1ena = <&gpb0 0 0>;
- wlf,ldo2ena = <&gpb0 1 0>;
- };
- };
-
- i2c@12CE0000 {
- status = "okay";
-
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- samsung,i2c-slave-addr = <0x38>;
-
- hdmiphy@38 {
- compatible = "samsung,exynos4212-hdmiphy";
- reg = <0x38>;
- };
- };
-
- i2c@121D0000 {
- status = "okay";
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <40000>;
- samsung,i2c-slave-addr = <0x38>;
-
- sata_phy_i2c:sata-phy@38 {
- compatible = "samsung,exynos-sataphy-i2c";
- reg = <0x38>;
- };
- };
-
- sata@122F0000 {
- status = "okay";
- };
-
- sata-phy@12170000 {
- status = "okay";
- samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
- };
-
- mmc_0: mmc@12200000 {
- status = "okay";
- num-slots = <1>;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- vmmc-supply = <&mmc_reg>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
- bus-width = <8>;
- cap-mmc-highspeed;
- };
-
- mmc_2: mmc@12220000 {
- status = "okay";
- num-slots = <1>;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- vmmc-supply = <&mmc_reg>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
- bus-width = <4>;
- disable-wp;
- cap-sd-highspeed;
- };
-
- i2s0: i2s@03830000 {
- status = "okay";
- };
-
gpio_keys {
compatible = "gpio-keys";
menu {
label = "SW-TACT2";
- gpios = <&gpx1 4 1>;
+ gpios = <&gpx1 4 GPIO_ACTIVE_LOW>;
linux,code = <KEY_MENU>;
gpio-key,wakeup;
};
home {
label = "SW-TACT3";
- gpios = <&gpx1 5 1>;
+ gpios = <&gpx1 5 GPIO_ACTIVE_LOW>;
linux,code = <KEY_HOME>;
gpio-key,wakeup;
};
up {
label = "SW-TACT4";
- gpios = <&gpx1 6 1>;
+ gpios = <&gpx1 6 GPIO_ACTIVE_LOW>;
linux,code = <KEY_UP>;
gpio-key,wakeup;
};
down {
label = "SW-TACT5";
- gpios = <&gpx1 7 1>;
+ gpios = <&gpx1 7 GPIO_ACTIVE_LOW>;
linux,code = <KEY_DOWN>;
gpio-key,wakeup;
};
back {
label = "SW-TACT6";
- gpios = <&gpx2 0 1>;
+ gpios = <&gpx2 0 GPIO_ACTIVE_LOW>;
linux,code = <KEY_BACK>;
gpio-key,wakeup;
};
wakeup {
label = "SW-TACT7";
- gpios = <&gpx2 1 1>;
+ gpios = <&gpx2 1 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WAKEUP>;
gpio-key,wakeup;
};
};
- hdmi {
- hpd-gpio = <&gpx3 7 2>;
- vdd_osc-supply = <&ldo10_reg>;
- vdd_pll-supply = <&ldo8_reg>;
- vdd-supply = <&ldo8_reg>;
- };
-
regulators {
compatible = "simple-bus";
#address-cells = <1>;
regulator-name = "VDD_33ON_2.8V";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
- gpio = <&gpx1 1 1>;
+ gpio = <&gpx1 1 GPIO_ACTIVE_LOW>;
enable-active-high;
};
};
};
- dp-controller@145B0000 {
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <4>;
- status = "okay";
+ // SMSC USB3503 connected in hardware only mode as a PHY
+ usb_hub: usb-hub {
+ compatible = "smsc,usb3503a";
+
+ reset-gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+ connect-gpios = <&gpd1 7 GPIO_ACTIVE_LOW>;
};
+};
- fimd: fimd@14400000 {
- status = "okay";
- display-timings {
- native-mode = <&timing0>;
- timing0: timing@0 {
- /* 2560x1600 DP panel */
- clock-frequency = <50000>;
- hactive = <2560>;
- vactive = <1600>;
- hfront-porch = <48>;
- hback-porch = <80>;
- hsync-len = <32>;
- vback-porch = <16>;
- vfront-porch = <8>;
- vsync-len = <6>;
- };
+&dp {
+ status = "okay";
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <4>;
+};
+
+&fimd {
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+
+ timing0: timing@0 {
+ /* 2560x1600 DP panel */
+ clock-frequency = <50000>;
+ hactive = <2560>;
+ vactive = <1600>;
+ hfront-porch = <48>;
+ hback-porch = <80>;
+ hsync-len = <32>;
+ vback-porch = <16>;
+ vfront-porch = <8>;
+ vsync-len = <6>;
};
};
+};
- usb_hub_bus {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
+&hdmi {
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_LOW>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+ vdd-supply = <&ldo8_reg>;
+};
+
+&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+ samsung,i2c-slave-addr = <0x66>;
+
+ s5m8767_pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
+
+ vinb1-supply = <&main_dc_reg>;
+ vinb2-supply = <&main_dc_reg>;
+ vinb3-supply = <&main_dc_reg>;
+ vinb4-supply = <&main_dc_reg>;
+ vinb5-supply = <&main_dc_reg>;
+ vinb6-supply = <&main_dc_reg>;
+ vinb7-supply = <&main_dc_reg>;
+ vinb8-supply = <&main_dc_reg>;
+ vinb9-supply = <&main_dc_reg>;
+
+ vinl1-supply = <&buck7_reg>;
+ vinl2-supply = <&buck7_reg>;
+ vinl3-supply = <&buck7_reg>;
+ vinl4-supply = <&main_dc_reg>;
+ vinl5-supply = <&main_dc_reg>;
+ vinl6-supply = <&main_dc_reg>;
+ vinl7-supply = <&main_dc_reg>;
+ vinl8-supply = <&buck8_reg>;
+ vinl9-supply = <&buck8_reg>;
+
+ s5m8767,pmic-buck2-dvs-voltage = <1300000>;
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>;
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>;
+ s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_HIGH>,
+ <&gpd1 1 GPIO_ACTIVE_HIGH>,
+ <&gpd1 2 GPIO_ACTIVE_HIGH>;
+ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_HIGH>,
+ <&gpx2 4 GPIO_ACTIVE_HIGH>,
+ <&gpx2 5 GPIO_ACTIVE_HIGH>;
+
+ regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "VDD_ALIVE_1.0V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
- // SMSC USB3503 connected in hardware only mode as a PHY
- usb_hub: usb_hub {
- compatible = "smsc,usb3503a";
+ ldo2_reg: LDO2 {
+ regulator-name = "VDD_28IO_DP_1.35V";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo3_reg: LDO3 {
+ regulator-name = "VDD_COMMON1_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo4_reg: LDO4 {
+ regulator-name = "VDD_IOPERI_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "VDD_EXT_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "VDD_MPLL_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
- reset-gpios = <&gpx3 5 1>;
- connect-gpios = <&gpd1 7 1>;
+ ldo7_reg: LDO7 {
+ regulator-name = "VDD_XPLL_1.1V";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "VDD_COMMON2_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo9_reg: LDO9 {
+ regulator-name = "VDD_33ON_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ op_mode = <1>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "VDD_COMMON3_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "VDD_ABB2_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "VDD_USB_3.0V";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "VDDQ_C2C_W_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "VDD18_ABB0_3_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "VDD10_COMMON4_1.0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "VDD18_HSIC_1.8V";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "VDDQ_MMC2_3_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ ldo18_reg: LDO18 {
+ regulator-name = "VDD_33ON_2.8V";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <1>;
+ };
+
+ ldo22_reg: LDO22 {
+ regulator-name = "EXT_33_OFF";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ op_mode = <1>;
+ };
+
+ ldo23_reg: LDO23 {
+ regulator-name = "EXT_28_OFF";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ op_mode = <1>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "PVDD_LDO25";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ op_mode = <1>;
+ };
+
+ ldo26_reg: LDO26 {
+ regulator-name = "EXT_18_OFF";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ op_mode = <1>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <912500>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "VDD_MEM_1.35V";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <1355000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck7_reg: BUCK7 {
+ regulator-name = "PVDD_BUCK7";
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ buck8_reg: BUCK8 {
+ regulator-name = "PVDD_BUCK8";
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "VDD_33_OFF_EXT1";
+ regulator-min-microvolt = <750000>;
+ regulator-max-microvolt = <3000000>;
+ op_mode = <1>;
+ };
};
};
};
+
+&i2c_2 {
+ status = "okay";
+
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ samsung,i2c-slave-addr = <0x50>;
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+};
+
+&i2c_3 {
+ status = "okay";
+
+ wm1811a@1a {
+ compatible = "wlf,wm1811";
+ reg = <0x1a>;
+
+ AVDD2-supply = <&main_dc_reg>;
+ CPVDD-supply = <&main_dc_reg>;
+ DBVDD1-supply = <&main_dc_reg>;
+ DBVDD2-supply = <&main_dc_reg>;
+ DBVDD3-supply = <&main_dc_reg>;
+ LDO1VDD-supply = <&main_dc_reg>;
+ SPKVDD1-supply = <&main_dc_reg>;
+ SPKVDD2-supply = <&main_dc_reg>;
+
+ wlf,ldo1ena = <&gpb0 0 GPIO_ACTIVE_HIGH>;
+ wlf,ldo2ena = <&gpb0 1 GPIO_ACTIVE_HIGH>;
+ };
+};
+
+&i2c_8 {
+ status = "okay";
+
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+ samsung,i2c-slave-addr = <0x38>;
+
+ hdmiphy@38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
+ };
+};
+
+&i2c_9 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <40000>;
+ samsung,i2c-slave-addr = <0x38>;
+
+ sata_phy_i2c:sata-phy@38 {
+ compatible = "samsung,exynos-sataphy-i2c";
+ reg = <0x38>;
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ vmmc-supply = <&mmc_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+};
+
+&mmc_2 {
+ status = "okay";
+ num-slots = <1>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ vmmc-supply = <&mmc_reg>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+ bus-width = <4>;
+ disable-wp;
+ cap-sd-highspeed;
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+ samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
+};
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
#include "exynos5250.dtsi"
/ {
bootargs = "root=/dev/ram0 rw ramdisk=8192 initrd=0x41000000,8M console=ttySAC2,115200 init=/linuxrc";
};
- rtc@101E0000 {
- status = "okay";
- };
-
- i2c@12C60000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <20000>;
- status = "okay";
-
- eeprom@50 {
- compatible = "samsung,s524ad0xd1";
- reg = <0x50>;
- };
-
- max77686@09 {
- compatible = "maxim,max77686";
- reg = <0x09>;
- interrupt-parent = <&gpx3>;
- interrupts = <2 0>;
-
- voltage-regulators {
- ldo1_reg: LDO1 {
- regulator-name = "P1.0V_LDO_OUT1";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- regulator-always-on;
- };
-
- ldo2_reg: LDO2 {
- regulator-name = "P1.2V_LDO_OUT2";
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- };
-
- ldo3_reg: LDO3 {
- regulator-name = "P1.8V_LDO_OUT3";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- };
-
- ldo4_reg: LDO4 {
- regulator-name = "P2.8V_LDO_OUT4";
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- };
-
- ldo5_reg: LDO5 {
- regulator-name = "P1.8V_LDO_OUT5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo6_reg: LDO6 {
- regulator-name = "P1.1V_LDO_OUT6";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- ldo7_reg: LDO7 {
- regulator-name = "P1.1V_LDO_OUT7";
- regulator-min-microvolt = <1100000>;
- regulator-max-microvolt = <1100000>;
- regulator-always-on;
- };
-
- ldo8_reg: LDO8 {
- regulator-name = "P1.0V_LDO_OUT8";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- ldo10_reg: LDO10 {
- regulator-name = "P1.8V_LDO_OUT10";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo11_reg: LDO11 {
- regulator-name = "P1.8V_LDO_OUT11";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo12_reg: LDO12 {
- regulator-name = "P3.0V_LDO_OUT12";
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- };
-
- ldo13_reg: LDO13 {
- regulator-name = "P1.8V_LDO_OUT13";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo14_reg: LDO14 {
- regulator-name = "P1.8V_LDO_OUT14";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- ldo15_reg: LDO15 {
- regulator-name = "P1.0V_LDO_OUT15";
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- ldo16_reg: LDO16 {
- regulator-name = "P1.8V_LDO_OUT16";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- buck1_reg: BUCK1 {
- regulator-name = "vdd_mif";
- regulator-min-microvolt = <950000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck2_reg: BUCK2 {
- regulator-name = "vdd_arm";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1350000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck3_reg: BUCK3 {
- regulator-name = "vdd_int";
- regulator-min-microvolt = <900000>;
- regulator-max-microvolt = <1200000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck4_reg: BUCK4 {
- regulator-name = "vdd_g3d";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1300000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck5_reg: BUCK5 {
- regulator-name = "P1.8V_BUCK_OUT5";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- regulator-boot-on;
- };
- };
- };
- };
-
vdd: fixed-regulator@0 {
compatible = "regulator-fixed";
regulator-name = "vdd-supply";
regulator-always-on;
};
- i2c@12C70000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <20000>;
- status = "okay";
+ sound {
+ compatible = "samsung,smdk-wm8994";
- eeprom@51 {
- compatible = "samsung,s524ad0xd1";
- reg = <0x51>;
+ samsung,i2s-controller = <&i2s0>;
+ samsung,audio-codec = <&wm8994>;
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <24000000>;
};
- wm8994: wm8994@1a {
- compatible = "wlf,wm8994";
- reg = <0x1a>;
+ codec_mclk: codec-mclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <16934000>;
+ };
+ };
+};
- gpio-controller;
- #gpio-cells = <2>;
+&dp {
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <4>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ status = "okay";
+};
- clocks = <&codec_mclk>;
- clock-names = "MCLK1";
+&ehci {
+ samsung,vbus-gpio = <&gpx2 6 GPIO_ACTIVE_HIGH>;
+};
- AVDD2-supply = <&vdd>;
- CPVDD-supply = <&vdd>;
- DBVDD-supply = <&dbvdd>;
- SPKVDD1-supply = <&spkvdd>;
- SPKVDD2-supply = <&spkvdd>;
+&fimd {
+ status = "okay";
+
+ display-timings {
+ native-mode = <&timing0>;
+
+ timing0: timing@0 {
+ /* 1280x800 */
+ clock-frequency = <50000>;
+ hactive = <1280>;
+ vactive = <800>;
+ hfront-porch = <4>;
+ hback-porch = <4>;
+ hsync-len = <4>;
+ vback-porch = <4>;
+ vfront-porch = <4>;
+ vsync-len = <4>;
};
};
+};
- i2c@121D0000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <40000>;
- samsung,i2c-slave-addr = <0x38>;
- status = "okay";
+&hdmi {
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+};
- sata_phy_i2c:sata-phy@38 {
- compatible = "samsung,exynos-sataphy-i2c";
- reg = <0x38>;
- };
+&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
+
+ eeprom@50 {
+ compatible = "samsung,s524ad0xd1";
+ reg = <0x50>;
};
- i2c@12C80000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- status = "okay";
+ max77686@09 {
+ compatible = "maxim,max77686";
+ reg = <0x09>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_NONE>;
+
+ voltage-regulators {
+ ldo1_reg: LDO1 {
+ regulator-name = "P1.0V_LDO_OUT1";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ };
- hdmiddc@50 {
- compatible = "samsung,exynos4210-hdmiddc";
- reg = <0x50>;
- };
- };
+ ldo2_reg: LDO2 {
+ regulator-name = "P1.2V_LDO_OUT2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ };
- i2c@12CE0000 {
- samsung,i2c-sda-delay = <100>;
- samsung,i2c-max-bus-freq = <66000>;
- status = "okay";
+ ldo3_reg: LDO3 {
+ regulator-name = "P1.8V_LDO_OUT3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
- hdmiphy@38 {
- compatible = "samsung,exynos4212-hdmiphy";
- reg = <0x38>;
- };
- };
+ ldo4_reg: LDO4 {
+ regulator-name = "P2.8V_LDO_OUT4";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
- sata@122F0000 {
- status = "okay";
- };
+ ldo5_reg: LDO5 {
+ regulator-name = "P1.8V_LDO_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- sata-phy@12170000 {
- status = "okay";
- samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
- };
+ ldo6_reg: LDO6 {
+ regulator-name = "P1.1V_LDO_OUT6";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
- mmc@12200000 {
- status = "okay";
- num-slots = <1>;
- broken-cd;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
- bus-width = <8>;
- cap-mmc-highspeed;
- };
+ ldo7_reg: LDO7 {
+ regulator-name = "P1.1V_LDO_OUT7";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ };
- mmc@12220000 {
- status = "okay";
- num-slots = <1>;
- card-detect-delay = <200>;
- samsung,dw-mshc-ciu-div = <3>;
- samsung,dw-mshc-sdr-timing = <2 3>;
- samsung,dw-mshc-ddr-timing = <1 2>;
- pinctrl-names = "default";
- pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
- bus-width = <4>;
- disable-wp;
- cap-sd-highspeed;
- };
+ ldo8_reg: LDO8 {
+ regulator-name = "P1.0V_LDO_OUT8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "P1.8V_LDO_OUT10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- spi_1: spi@12d30000 {
- cs-gpios = <&gpa2 5 0>;
- status = "okay";
+ ldo11_reg: LDO11 {
+ regulator-name = "P1.8V_LDO_OUT11";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
- w25q80bw@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "w25x80";
- reg = <0>;
- spi-max-frequency = <1000000>;
+ ldo12_reg: LDO12 {
+ regulator-name = "P3.0V_LDO_OUT12";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
- controller-data {
- samsung,spi-feedback-delay = <0>;
+ ldo13_reg: LDO13 {
+ regulator-name = "P1.8V_LDO_OUT13";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
- partition@0 {
- label = "U-Boot";
- reg = <0x0 0x40000>;
- read-only;
+ ldo14_reg: LDO14 {
+ regulator-name = "P1.8V_LDO_OUT14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
};
- partition@40000 {
- label = "Kernel";
- reg = <0x40000 0xc0000>;
+ ldo15_reg: LDO15 {
+ regulator-name = "P1.0V_LDO_OUT15";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "P1.8V_LDO_OUT16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "P1.8V_BUCK_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
};
};
};
+};
- hdmi {
- hpd-gpio = <&gpx3 7 0>;
- };
+&i2c_1 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <20000>;
- codec@11000000 {
- samsung,mfc-r = <0x43000000 0x800000>;
- samsung,mfc-l = <0x51000000 0x800000>;
+ eeprom@51 {
+ compatible = "samsung,s524ad0xd1";
+ reg = <0x51>;
};
- i2s0: i2s@03830000 {
- status = "okay";
+ wm8994: wm8994@1a {
+ compatible = "wlf,wm8994";
+ reg = <0x1a>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ clocks = <&codec_mclk>;
+ clock-names = "MCLK1";
+
+ AVDD2-supply = <&vdd>;
+ CPVDD-supply = <&vdd>;
+ DBVDD-supply = <&dbvdd>;
+ SPKVDD1-supply = <&spkvdd>;
+ SPKVDD2-supply = <&spkvdd>;
};
+};
- sound {
- compatible = "samsung,smdk-wm8994";
+&i2c_2 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
- samsung,i2s-controller = <&i2s0>;
- samsung,audio-codec = <&wm8994>;
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
};
+};
+
+&i2c_8 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
- usb@12110000 {
- samsung,vbus-gpio = <&gpx2 6 0>;
+ hdmiphy@38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
};
+};
+
+&i2c_9 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <40000>;
+ samsung,i2c-slave-addr = <0x38>;
- dp-controller@145B0000 {
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <4>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&dp_hpd>;
- status = "okay";
+ sata_phy_i2c: sata-phy@38 {
+ compatible = "samsung,exynos-sataphy-i2c";
+ reg = <0x38>;
};
+};
- fimd@14400000 {
- status = "okay";
- display-timings {
- native-mode = <&timing0>;
- timing0: timing@0 {
- /* 1280x800 */
- clock-frequency = <50000>;
- hactive = <1280>;
- vactive = <800>;
- hfront-porch = <4>;
- hback-porch = <4>;
- hsync-len = <4>;
- vback-porch = <4>;
- vfront-porch = <4>;
- vsync-len = <4>;
- };
+&i2s0 {
+ status = "okay";
+};
+
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>;
+ bus-width = <8>;
+ cap-mmc-highspeed;
+};
+
+&mmc_2 {
+ status = "okay";
+ num-slots = <1>;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
+ bus-width = <4>;
+ disable-wp;
+ cap-sd-highspeed;
+};
+
+&rtc {
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&sata_phy {
+ status = "okay";
+ samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
+};
+
+&spi_1 {
+ status = "okay";
+ cs-gpios = <&gpa2 5 GPIO_ACTIVE_HIGH>;
+
+ w25q80bw@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25x80";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+
+ controller-data {
+ samsung,spi-feedback-delay = <0>;
};
- };
- fixed-rate-clocks {
- xxti {
- compatible = "samsung,clock-xxti";
- clock-frequency = <24000000>;
+ partition@0 {
+ label = "U-Boot";
+ reg = <0x0 0x40000>;
+ read-only;
};
- codec_mclk: codec-mclk {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <16934000>;
+ partition@40000 {
+ label = "Kernel";
+ reg = <0x40000 0xc0000>;
};
};
};
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
-*/
+ */
/dts-v1/;
#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/clock/maxim,max77686.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
#include "exynos5250.dtsi"
/ {
};
chosen {
- };
-
- rtc@101E0000 {
- status = "okay";
- };
-
- pinctrl@11400000 {
- ec_irq: ec-irq {
- samsung,pins = "gpx1-6";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- sd3_clk: sd3-clk {
- samsung,pin-drv = <0>;
- };
-
- sd3_cmd: sd3-cmd {
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- sd3_bus4: sd3-bus-width4 {
- samsung,pin-drv = <0>;
- };
-
- max98095_en: max98095-en {
- samsung,pins = "gpx1-7";
- samsung,pin-function = <0>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- tps65090_irq: tps65090-irq {
- samsung,pins = "gpx2-6";
- samsung,pin-function = <0>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- usb3_vbus_en: usb3-vbus-en {
- samsung,pins = "gpx2-7";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
-
- hdmi_hpd_irq: hdmi-hpd-irq {
- samsung,pins = "gpx3-7";
- samsung,pin-function = <0>;
- samsung,pin-pud = <1>;
- samsung,pin-drv = <0>;
- };
- };
-
- pinctrl@13400000 {
- arb_their_claim: arb-their-claim {
- samsung,pins = "gpe0-4";
- samsung,pin-function = <0>;
- samsung,pin-pud = <3>;
- samsung,pin-drv = <0>;
- };
-
- arb_our_claim: arb-our-claim {
- samsung,pins = "gpf0-3";
- samsung,pin-function = <1>;
- samsung,pin-pud = <0>;
- samsung,pin-drv = <0>;
- };
+ bootargs = "console=tty1";
};
gpio-keys {
power {
label = "Power";
- gpios = <&gpx1 3 1>;
- linux,code = <116>; /* KEY_POWER */
+ gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
gpio-key,wakeup;
};
lid-switch {
label = "Lid";
- gpios = <&gpx3 5 1>;
+ gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
linux,input-type = <5>; /* EV_SW */
linux,code = <0>; /* SW_LID */
debounce-interval = <1>;
i2c-parent = <&{/i2c@12CA0000}>;
- our-claim-gpio = <&gpf0 3 1>;
- their-claim-gpios = <&gpe0 4 1>;
+ our-claim-gpio = <&gpf0 3 GPIO_ACTIVE_LOW>;
+ their-claim-gpios = <&gpe0 4 GPIO_ACTIVE_LOW>;
slew-delay-us = <10>;
wait-retry-us = <3000>;
wait-free-us = <50000>;
cros_ec: embedded-controller {
compatible = "google,cros-ec-i2c";
reg = <0x1e>;
- interrupts = <6 0>;
+ interrupts = <6 IRQ_TYPE_NONE>;
interrupt-parent = <&gpx1>;
pinctrl-names = "default";
pinctrl-0 = <&ec_irq>;
};
i2c@12CD0000 {
- max98095: codec@11 {
- compatible = "maxim,max98095";
- reg = <0x11>;
- pinctrl-0 = <&max98095_en>;
- pinctrl-names = "default";
- };
-
ptn3460: lvds-bridge@20 {
compatible = "nxp,ptn3460";
reg = <0x20>;
};
};
- i2s0: i2s@03830000 {
- status = "okay";
- };
-
sound {
compatible = "google,snow-audio-max98095";
regulator-name = "P5.0V_USB3CON";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
- gpio = <&gpx2 7 0>;
+ gpio = <&gpx2 7 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&usb3_vbus_en>;
enable-active-high;
};
- phy@12100000 {
- vbus-supply = <&usb3_vbus_reg>;
- };
-
- usb@12110000 {
- samsung,vbus-gpio = <&gpx1 1 0>;
- };
-
fixed-rate-clocks {
xxti {
compatible = "samsung,clock-xxti";
};
};
- hdmi {
- hpd-gpio = <&gpx3 7 0>;
- pinctrl-names = "default";
- pinctrl-0 = <&hdmi_hpd_irq>;
- phy = <&hdmiphy>;
- ddc = <&i2c_2>;
- hdmi-en-supply = <&tps65090_fet7>;
- vdd-supply = <&ldo8_reg>;
- vdd_osc-supply = <&ldo10_reg>;
- vdd_pll-supply = <&ldo8_reg>;
- };
-
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm 0 1000000 0>;
pinctrl-names = "default";
};
- fimd@14400000 {
- status = "okay";
- samsung,invert-vclk;
- };
-
panel: panel {
compatible = "auo,b116xw03";
power-supply = <&fet6>;
backlight = <&backlight>;
};
+};
- dp-controller@145B0000 {
- status = "okay";
- pinctrl-names = "default";
- pinctrl-0 = <&dp_hpd>;
- samsung,color-space = <0>;
- samsung,dynamic-range = <0>;
- samsung,ycbcr-coeff = <0>;
- samsung,color-depth = <1>;
- samsung,link-rate = <0x0a>;
- samsung,lane-count = <2>;
- samsung,hpd-gpio = <&gpx0 7 0>;
- bridge = <&ptn3460>;
- };
+&dp {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <2>;
+ samsung,hpd-gpio = <&gpx0 7 GPIO_ACTIVE_HIGH>;
+ bridge = <&ptn3460>;
+};
+
+&ehci {
+ samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+ status = "okay";
+ samsung,invert-vclk;
+};
+
+&hdmi {
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ phy = <&hdmiphy>;
+ ddc = <&i2c_2>;
+ hdmi-en-supply = <&tps65090_fet7>;
+ vdd-supply = <&ldo8_reg>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
};
&i2c_0 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <378000>;
- max77686@09 {
+ max77686: max77686@09 {
compatible = "maxim,max77686";
interrupt-parent = <&gpx3>;
- interrupts = <2 0>;
+ interrupts = <2 IRQ_TYPE_NONE>;
pinctrl-names = "default";
pinctrl-0 = <&max77686_irq>;
wakeup-source;
trackpad {
reg = <0x67>;
compatible = "cypress,cyapa";
- interrupts = <2 0>;
+ interrupts = <2 IRQ_TYPE_NONE>;
interrupt-parent = <&gpx1>;
wakeup-source;
};
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
+
+ max98095: codec@11 {
+ compatible = "maxim,max98095";
+ reg = <0x11>;
+ pinctrl-0 = <&max98095_en>;
+ pinctrl-names = "default";
+ };
};
&i2c_8 {
};
};
+&i2s0 {
+ status = "okay";
+};
+
&mmc_0 {
status = "okay";
num-slots = <1>;
pinctrl-names = "default";
pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>;
bus-width = <4>;
- wp-gpios = <&gpc2 1 0>;
+ wp-gpios = <&gpc2 1 GPIO_ACTIVE_HIGH>;
cap-sd-highspeed;
};
};
&pinctrl_0 {
+ ec_irq: ec-irq {
+ samsung,pins = "gpx1-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ max98095_en: max98095-en {
+ samsung,pins = "gpx1-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ tps65090_irq: tps65090-irq {
+ samsung,pins = "gpx2-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ usb3_vbus_en: usb3-vbus-en {
+ samsung,pins = "gpx2-7";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
max77686_irq: max77686-irq {
samsung,pins = "gpx3-2";
samsung,pin-function = <0>;
samsung,pin-pud = <0>;
samsung,pin-drv = <0>;
};
+
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_1 {
+ arb_their_claim: arb-their-claim {
+ samsung,pins = "gpe0-4";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ arb_our_claim: arb-our-claim {
+ samsung,pins = "gpf0-3";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&rtc {
+ status = "okay";
+ clocks = <&clock CLK_RTC>, <&max77686 MAX77686_CLK_AP>;
+ clock-names = "rtc", "rtc_src";
+};
+
+&sd3_bus4 {
+ samsung,pin-drv = <0>;
+};
+
+&sd3_clk {
+ samsung,pin-drv = <0>;
+};
+
+&sd3_cmd {
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
};
&spi_1 {
num-cs = <1>;
};
+&usbdrd_dwc3 {
+ dr_mode = "host";
+};
+
+&usbdrd_phy {
+ vbus-supply = <&usb3_vbus_reg>;
+};
+
#include "cros-ec-keyboard.dtsi"
--- /dev/null
+/*
+ * Google Spring board device tree source
+ *
+ * Copyright (c) 2013 Google, Inc
+ * Copyright (c) 2014 SUSE LINUX Products GmbH
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include "exynos5250.dtsi"
+
+/ {
+ model = "Google Spring";
+ compatible = "google,spring", "samsung,exynos5250", "samsung,exynos5";
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ chosen {
+ bootargs = "console=tty1";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&power_key_irq>, <&lid_irq>;
+
+ power {
+ label = "Power";
+ gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ gpio-key,wakeup;
+ };
+
+ lid-switch {
+ label = "Lid";
+ gpios = <&gpx3 5 GPIO_ACTIVE_LOW>;
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0>; /* SW_LID */
+ debounce-interval = <1>;
+ gpio-key,wakeup;
+ };
+ };
+
+ usb-hub {
+ compatible = "smsc,usb3503a";
+ reset-gpios = <&gpe1 0 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hsic_reset>;
+ };
+
+ fixed-rate-clocks {
+ xxti {
+ compatible = "samsung,clock-xxti";
+ clock-frequency = <24000000>;
+ };
+ };
+};
+
+&dp {
+ status = "okay";
+ pinctrl-names = "default";
+ pinctrl-0 = <&dp_hpd_gpio>;
+ samsung,color-space = <0>;
+ samsung,dynamic-range = <0>;
+ samsung,ycbcr-coeff = <0>;
+ samsung,color-depth = <1>;
+ samsung,link-rate = <0x0a>;
+ samsung,lane-count = <1>;
+ samsung,hpd-gpio = <&gpc3 0 GPIO_ACTIVE_HIGH>;
+};
+
+&ehci {
+ samsung,vbus-gpio = <&gpx1 1 GPIO_ACTIVE_HIGH>;
+};
+
+&fimd {
+ status = "okay";
+ samsung,invert-vclk;
+};
+
+&hdmi {
+ hpd-gpio = <&gpx3 7 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&hdmi_hpd_irq>;
+ phy = <&hdmiphy>;
+ ddc = <&i2c_2>;
+ hdmi-en-supply = <&ldo8_reg>;
+ vdd-supply = <&ldo8_reg>;
+ vdd_osc-supply = <&ldo10_reg>;
+ vdd_pll-supply = <&ldo8_reg>;
+};
+
+&i2c_0 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ s5m8767-pmic@66 {
+ compatible = "samsung,s5m8767-pmic";
+ reg = <0x66>;
+ interrupt-parent = <&gpx3>;
+ interrupts = <2 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&s5m8767_irq &s5m8767_dvs &s5m8767_ds>;
+ wakeup-source;
+
+ s5m8767,pmic-buck-dvs-gpios = <&gpd1 0 GPIO_ACTIVE_LOW>, /* DVS1 */
+ <&gpd1 1 GPIO_ACTIVE_LOW>, /* DVS2 */
+ <&gpd1 2 GPIO_ACTIVE_LOW>; /* DVS3 */
+
+ s5m8767,pmic-buck-ds-gpios = <&gpx2 3 GPIO_ACTIVE_LOW>, /* SET1 */
+ <&gpx2 4 GPIO_ACTIVE_LOW>, /* SET2 */
+ <&gpx2 5 GPIO_ACTIVE_LOW>; /* SET3 */
+
+ /*
+ * The following arrays of DVS voltages are not used, since we are
+ * not using GPIOs to control PMIC bucks, but they must be defined
+ * to please the driver.
+ */
+ s5m8767,pmic-buck2-dvs-voltage = <1350000>, <1300000>,
+ <1250000>, <1200000>,
+ <1150000>, <1100000>,
+ <1000000>, <950000>;
+
+ s5m8767,pmic-buck3-dvs-voltage = <1100000>, <1100000>,
+ <1100000>, <1100000>,
+ <1000000>, <1000000>,
+ <1000000>, <1000000>;
+
+ s5m8767,pmic-buck4-dvs-voltage = <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>,
+ <1200000>, <1200000>;
+
+ clocks {
+ compatible = "samsung,s5m8767-clk";
+ #clock-cells = <1>;
+ clock-output-names = "en32khz_ap",
+ "en32khz_cp",
+ "en32khz_bt";
+ };
+
+ regulators {
+ ldo4_reg: LDO4 {
+ regulator-name = "P1.0V_LDO_OUT4";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo5_reg: LDO5 {
+ regulator-name = "P1.0V_LDO_OUT5";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo6_reg: LDO6 {
+ regulator-name = "vdd_mydp";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo7_reg: LDO7 {
+ regulator-name = "P1.1V_LDO_OUT7";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo8_reg: LDO8 {
+ regulator-name = "P1.0V_LDO_OUT8";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo10_reg: LDO10 {
+ regulator-name = "P1.8V_LDO_OUT10";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo11_reg: LDO11 {
+ regulator-name = "P1.8V_LDO_OUT11";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo12_reg: LDO12 {
+ regulator-name = "P3.0V_LDO_OUT12";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo13_reg: LDO13 {
+ regulator-name = "P1.8V_LDO_OUT13";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo14_reg: LDO14 {
+ regulator-name = "P1.8V_LDO_OUT14";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo15_reg: LDO15 {
+ regulator-name = "P1.0V_LDO_OUT15";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo16_reg: LDO16 {
+ regulator-name = "P1.8V_LDO_OUT16";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ op_mode = <3>;
+ };
+
+ ldo17_reg: LDO17 {
+ regulator-name = "P2.8V_LDO_OUT17";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-always-on;
+ op_mode = <0>;
+ };
+
+ ldo25_reg: LDO25 {
+ regulator-name = "vdd_bridge";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ op_mode = <1>;
+ };
+
+ buck1_reg: BUCK1 {
+ regulator-name = "vdd_mif";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck2_reg: BUCK2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck3_reg: BUCK3 {
+ regulator-name = "vdd_int";
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck4_reg: BUCK4 {
+ regulator-name = "vdd_g3d";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+
+ buck5_reg: BUCK5 {
+ regulator-name = "P1.8V_BUCK_OUT5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <1>;
+ };
+
+ buck6_reg: BUCK6 {
+ regulator-name = "P1.2V_BUCK_OUT6";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <0>;
+ };
+
+ buck9_reg: BUCK9 {
+ regulator-name = "vdd_ummc";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-always-on;
+ regulator-boot-on;
+ op_mode = <3>;
+ };
+ };
+ };
+};
+
+&i2c_1 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ trackpad@4b {
+ compatible = "atmel,maxtouch";
+ reg = <0x4b>;
+ interrupt-parent = <&gpx1>;
+ interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&trackpad_irq>;
+ linux,gpio-keymap = <KEY_RESERVED
+ KEY_RESERVED
+ KEY_RESERVED
+ KEY_RESERVED
+ KEY_RESERVED
+ BTN_LEFT>;
+ wakeup-source;
+ };
+};
+
+/*
+ * Disabled pullups since external part has its own pullups and
+ * double-pulling gets us out of spec in some cases.
+ */
+&i2c2_bus {
+ samsung,pin-pud = <0>;
+};
+
+&i2c_2 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ hdmiddc@50 {
+ compatible = "samsung,exynos4210-hdmiddc";
+ reg = <0x50>;
+ };
+};
+
+&i2c_3 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_4 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ cros_ec: embedded-controller {
+ compatible = "google,cros-ec-i2c";
+ reg = <0x1e>;
+ interrupts = <6 IRQ_TYPE_NONE>;
+ interrupt-parent = <&gpx1>;
+ wakeup-source;
+ pinctrl-names = "default";
+ pinctrl-0 = <&ec_irq>;
+ };
+};
+
+&i2c_5 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+};
+
+&i2c_7 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <66000>;
+
+ temperature-sensor@4c {
+ compatible = "gmt,g781";
+ reg = <0x4c>;
+ };
+};
+
+&i2c_8 {
+ status = "okay";
+ samsung,i2c-sda-delay = <100>;
+ samsung,i2c-max-bus-freq = <378000>;
+
+ hdmiphy: hdmiphy@38 {
+ compatible = "samsung,exynos4212-hdmiphy";
+ reg = <0x38>;
+ };
+};
+
+&i2s0 {
+ status = "okay";
+};
+
+&mfc {
+ samsung,mfc-r = <0x43000000 0x800000>;
+ samsung,mfc-l = <0x51000000 0x800000>;
+};
+
+&mmc_0 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus4 &sd0_bus8>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <8>;
+ };
+};
+
+/*
+ * On Spring we've got SIP WiFi and so can keep drive strengths low to
+ * reduce EMI.
+ */
+&mmc_1 {
+ status = "okay";
+ num-slots = <1>;
+ supports-highspeed;
+ broken-cd;
+ card-detect-delay = <200>;
+ samsung,dw-mshc-ciu-div = <3>;
+ samsung,dw-mshc-sdr-timing = <2 3>;
+ samsung,dw-mshc-ddr-timing = <1 2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&sd1_clk &sd1_cmd &sd1_cd &sd1_bus4>;
+
+ slot@0 {
+ reg = <0>;
+ bus-width = <4>;
+ };
+};
+
+&pinctrl_0 {
+ s5m8767_dvs: s5m8767-dvs {
+ samsung,pins = "gpd1-0", "gpd1-1", "gpd1-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+
+ dp_hpd_gpio: dp-hpd-gpio {
+ samsung,pins = "gpc3-0";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+ };
+
+ trackpad_irq: trackpad-irq {
+ samsung,pins = "gpx1-2";
+ samsung,pin-function = <0xf>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ power_key_irq: power-key-irq {
+ samsung,pins = "gpx1-3";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ ec_irq: ec-irq {
+ samsung,pins = "gpx1-6";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ s5m8767_ds: s5m8767-ds {
+ samsung,pins = "gpx2-3", "gpx2-4", "gpx2-5";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+
+ s5m8767_irq: s5m8767-irq {
+ samsung,pins = "gpx3-2";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ lid_irq: lid-irq {
+ samsung,pins = "gpx3-5";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+
+ hdmi_hpd_irq: hdmi-hpd-irq {
+ samsung,pins = "gpx3-7";
+ samsung,pin-function = <0>;
+ samsung,pin-pud = <1>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&pinctrl_1 {
+ hsic_reset: hsic-reset {
+ samsung,pins = "gpe1-0";
+ samsung,pin-function = <1>;
+ samsung,pin-pud = <0>;
+ samsung,pin-drv = <0>;
+ };
+};
+
+&sd1_bus4 {
+ samsung,pin-drv = <0>;
+};
+
+&sd1_cd {
+ samsung,pin-drv = <0>;
+};
+
+&sd1_clk {
+ samsung,pin-drv = <0>;
+};
+
+&sd1_cmd {
+ samsung,pin-pud = <3>;
+ samsung,pin-drv = <0>;
+};
+
+&spi_1 {
+ status = "okay";
+ samsung,spi-src-clk = <0>;
+ num-cs = <1>;
+};
+
+#include "cros-ec-keyboard.dtsi"
clock-names = "fimg2d";
};
- codec@11000000 {
+ mfc: codec@11000000 {
compatible = "samsung,mfc-v6";
reg = <0x11000000 0x10000>;
interrupts = <0 96 0>;
clock-names = "mfc";
};
- rtc@101E0000 {
+ rtc: rtc@101E0000 {
clocks = <&clock CLK_RTC>;
clock-names = "rtc";
status = "disabled";
clock-names = "uart", "clk_uart_baud0";
};
- sata@122F0000 {
+ sata: sata@122F0000 {
compatible = "snps,dwc-ahci";
samsung,sata-freq = <66>;
reg = <0x122F0000 0x1ff>;
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_bus>;
+ samsung,sysreg-phandle = <&sysreg_system_controller>;
status = "disabled";
};
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_bus>;
+ samsung,sysreg-phandle = <&sysreg_system_controller>;
status = "disabled";
};
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c2_bus>;
+ samsung,sysreg-phandle = <&sysreg_system_controller>;
status = "disabled";
};
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c3_bus>;
+ samsung,sysreg-phandle = <&sysreg_system_controller>;
status = "disabled";
};
#size-cells = <1>;
ranges;
- dwc3 {
+ usbdrd_dwc3: dwc3 {
compatible = "synopsys,dwc3";
reg = <0x12000000 0x10000>;
interrupts = <0 72 0>;
#phy-cells = <1>;
};
- usb@12110000 {
+ ehci: usb@12110000 {
compatible = "samsung,exynos4210-ehci";
reg = <0x12110000 0x100>;
interrupts = <0 71 0>;
};
};
- usb@12120000 {
+ ohci: usb@12120000 {
compatible = "samsung,exynos4210-ohci";
reg = <0x12120000 0x100>;
interrupts = <0 71 0>;
clock-names = "gscl";
};
- hdmi {
+ hdmi: hdmi {
compatible = "samsung,exynos4212-hdmi";
reg = <0x14530000 0x70000>;
interrupts = <0 95 0>;
#phy-cells = <0>;
};
- dp-controller@145B0000 {
+ dp: dp-controller@145B0000 {
clocks = <&clock CLK_DP>;
clock-names = "dp";
phys = <&dp_phy>;
phy-names = "dp";
};
- fimd@14400000 {
+ fimd: fimd@14400000 {
clocks = <&clock CLK_SCLK_FIMD1>, <&clock CLK_FIMD1>;
clock-names = "sclk_fimd", "fimd";
};
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/maxim,max77802.h>
#include "exynos5420.dtsi"
/ {
status = "okay";
clock-frequency = <400000>;
- max77802-pmic@9 {
+ max77802: max77802-pmic@9 {
compatible = "maxim,max77802";
interrupt-parent = <&gpx3>;
interrupts = <1 IRQ_TYPE_NONE>;
status = "okay";
num-slots = <1>;
broken-cd;
- caps2-mmc-hs200-1_8v;
+ mmc-hs200-1_8v;
cap-mmc-highspeed;
non-removable;
card-detect-delay = <200>;
&rtc {
status = "okay";
+ clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
+ clock-names = "rtc", "rtc_src";
};
&spi_2 {
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c0_bus>;
+ samsung,sysreg-phandle = <&sysreg_system_controller>;
status = "disabled";
};
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c1_bus>;
+ samsung,sysreg-phandle = <&sysreg_system_controller>;
status = "disabled";
};
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c2_bus>;
+ samsung,sysreg-phandle = <&sysreg_system_controller>;
status = "disabled";
};
clock-names = "i2c";
pinctrl-names = "default";
pinctrl-0 = <&i2c3_bus>;
+ samsung,sysreg-phandle = <&sysreg_system_controller>;
status = "disabled";
};
#include <dt-bindings/input/input.h>
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/clock/maxim,max77802.h>
#include "exynos5800.dtsi"
/ {
status = "okay";
clock-frequency = <400000>;
- max77802-pmic@9 {
+ max77802: max77802-pmic@9 {
compatible = "maxim,max77802";
interrupt-parent = <&gpx3>;
interrupts = <1 IRQ_TYPE_NONE>;
status = "okay";
num-slots = <1>;
broken-cd;
- caps2-mmc-hs200-1_8v;
+ mmc-hs200-1_8v;
cap-mmc-highspeed;
non-removable;
card-detect-delay = <200>;
&rtc {
status = "okay";
+ clocks = <&clock CLK_RTC>, <&max77802 MAX77802_CLK_32K_AP>;
+ clock-names = "rtc", "rtc_src";
};
&spi_2 {
&uart0 {
status = "okay";
};
+
+&gmac0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy-handle = <&phy2>;
+ phy-mode = "mii";
+ /* Placeholder, overwritten by bootloader */
+ mac-address = [00 00 00 00 00 00];
+ status = "okay";
+
+ phy2: ethernet-phy@2 {
+ reg = <2>;
+ };
+};
+
+&gmac1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy-handle = <&phy1>;
+ phy-mode = "rgmii";
+ /* Placeholder, overwritten by bootloader */
+ mac-address = [00 00 00 00 00 00];
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
+
+&ahci {
+ phys = <&sata_phy>;
+ phy-names = "sata-phy";
+};
clock-names = "apb_pclk";
status = "disabled";
};
+
+ gpio0: gpio@b20000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb20000 0x1000>;
+ interrupts = <0 108 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio1: gpio@b21000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb21000 0x1000>;
+ interrupts = <0 109 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio2: gpio@b22000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb22000 0x1000>;
+ interrupts = <0 110 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio3: gpio@b23000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb23000 0x1000>;
+ interrupts = <0 111 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio4: gpio@b24000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb24000 0x1000>;
+ interrupts = <0 112 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio5: gpio@004000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0x004000 0x1000>;
+ interrupts = <0 113 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio6: gpio@b26000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb26000 0x1000>;
+ interrupts = <0 114 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio7: gpio@b27000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb27000 0x1000>;
+ interrupts = <0 115 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio8: gpio@b28000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb28000 0x1000>;
+ interrupts = <0 116 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio9: gpio@b29000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb29000 0x1000>;
+ interrupts = <0 117 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio10: gpio@b2a000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb2a000 0x1000>;
+ interrupts = <0 118 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio11: gpio@b2b000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb2b000 0x1000>;
+ interrupts = <0 119 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio12: gpio@b2c000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb2c000 0x1000>;
+ interrupts = <0 120 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio13: gpio@b2d000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb2d000 0x1000>;
+ interrupts = <0 121 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio14: gpio@b2e000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb2e000 0x1000>;
+ interrupts = <0 122 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio15: gpio@b2f000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb2f000 0x1000>;
+ interrupts = <0 123 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio16: gpio@b30000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb30000 0x1000>;
+ interrupts = <0 124 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ gpio17: gpio@b31000 {
+ compatible = "arm,pl061", "arm,primecell";
+ reg = <0xb31000 0x1000>;
+ interrupts = <0 125 0x4>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ clocks = <&clock HIX5HD2_FIXED_100M>;
+ clock-names = "apb_pclk";
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ status = "disabled";
+ };
+
+ wdt0: watchdog@a2c000 {
+ compatible = "arm,sp805", "arm,primecell";
+ arm,primecell-periphid = <0x00141805>;
+ reg = <0xa2c000 0x1000>;
+ interrupts = <0 29 4>;
+ clocks = <&clock HIX5HD2_WDG0_RST>;
+ clock-names = "apb_pclk";
+ };
};
local_timer@00a00600 {
};
sysctrl: system-controller@00000000 {
- compatible = "hisilicon,sysctrl";
+ compatible = "hisilicon,sysctrl", "syscon";
reg = <0x00000000 0x1000>;
- reboot-offset = <0x4>;
+ };
+
+ reboot {
+ compatible = "syscon-reboot";
+ regmap = <&sysctrl>;
+ offset = <0x4>;
+ mask = <0xdeadbeef>;
};
cpuctrl@00a22000 {
#clock-cells = <1>;
};
};
+
+ /* unremovable emmc as mmcblk0 */
+ mmc: mmc@1830000 {
+ compatible = "snps,dw-mshc";
+ reg = <0x1830000 0x1000>;
+ interrupts = <0 35 4>;
+ clocks = <&clock HIX5HD2_MMC_CIU_RST>,
+ <&clock HIX5HD2_MMC_BIU_CLK>;
+ clock-names = "ciu", "biu";
+ };
+
+ sd: mmc@1820000 {
+ compatible = "snps,dw-mshc";
+ reg = <0x1820000 0x1000>;
+ interrupts = <0 34 4>;
+ clocks = <&clock HIX5HD2_SD_CIU_RST>,
+ <&clock HIX5HD2_SD_BIU_CLK>;
+ clock-names = "ciu","biu";
+ };
+
+ gmac0: ethernet@1840000 {
+ compatible = "hisilicon,hix5hd2-gmac";
+ reg = <0x1840000 0x1000>,<0x184300c 0x4>;
+ interrupts = <0 71 4>;
+ clocks = <&clock HIX5HD2_MAC0_CLK>;
+ status = "disabled";
+ };
+
+ gmac1: ethernet@1841000 {
+ compatible = "hisilicon,hix5hd2-gmac";
+ reg = <0x1841000 0x1000>,<0x1843010 0x4>;
+ interrupts = <0 72 4>;
+ clocks = <&clock HIX5HD2_MAC1_CLK>;
+ status = "disabled";
+ };
+
+ usb0: ehci@1890000 {
+ compatible = "generic-ehci";
+ reg = <0x1890000 0x1000>;
+ interrupts = <0 66 4>;
+ clocks = <&clock HIX5HD2_USB_CLK>;
+ };
+
+ usb1: ohci@1880000 {
+ compatible = "generic-ohci";
+ reg = <0x1880000 0x1000>;
+ interrupts = <0 67 4>;
+ clocks = <&clock HIX5HD2_USB_CLK>;
+ };
+
+ peripheral_ctrl: syscon@a20000 {
+ compatible = "syscon";
+ reg = <0xa20000 0x1000>;
+ };
+
+ sata_phy: phy@1900000 {
+ compatible = "hisilicon,hix5hd2-sata-phy";
+ reg = <0x1900000 0x10000>;
+ #phy-cells = <0>;
+ hisilicon,peripheral-syscon = <&peripheral_ctrl>;
+ hisilicon,power-reg = <0x8 10>;
+ };
+
+ ahci: sata@1900000 {
+ compatible = "hisilicon,hisi-ahci";
+ reg = <0x1900000 0x10000>;
+ interrupts = <0 70 4>;
+ clocks = <&clock HIX5HD2_SATA_CLK>;
+ };
+
+ ir: ir@001000 {
+ compatible = "hisilicon,hix5hd2-ir";
+ reg = <0x001000 0x1000>;
+ interrupts = <0 47 4>;
+ clocks = <&clock HIX5HD2_FIXED_24M>;
+ hisilicon,power-syscon = <&sysctrl>;
+ };
+
+ i2c0: i2c@b10000 {
+ compatible = "hisilicon,hix5hd2-i2c";
+ reg = <0xb10000 0x1000>;
+ interrupts = <0 38 4>;
+ clocks = <&clock HIX5HD2_I2C0_RST>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@b11000 {
+ compatible = "hisilicon,hix5hd2-i2c";
+ reg = <0xb11000 0x1000>;
+ interrupts = <0 39 4>;
+ clocks = <&clock HIX5HD2_I2C1_RST>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@b12000 {
+ compatible = "hisilicon,hix5hd2-i2c";
+ reg = <0xb12000 0x1000>;
+ interrupts = <0 40 4>;
+ clocks = <&clock HIX5HD2_I2C2_RST>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@b13000 {
+ compatible = "hisilicon,hix5hd2-i2c";
+ reg = <0xb13000 0x1000>;
+ interrupts = <0 41 4>;
+ clocks = <&clock HIX5HD2_I2C3_RST>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@b16000 {
+ compatible = "hisilicon,hix5hd2-i2c";
+ reg = <0xb16000 0x1000>;
+ interrupts = <0 43 4>;
+ clocks = <&clock HIX5HD2_I2C4_RST>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c5: i2c@b17000 {
+ compatible = "hisilicon,hix5hd2-i2c";
+ reg = <0xb17000 0x1000>;
+ interrupts = <0 44 4>;
+ clocks = <&clock HIX5HD2_I2C5_RST>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
};
i2c0: i2c@80058000 {
pinctrl-names = "default";
pinctrl-0 = <&i2c0_pins_a>;
- clock-frequency = <400000>;
status = "okay";
sgtl5000: codec@0a {
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x70014000 0x4000>;
interrupts = <30>;
- clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
+ clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>,
+ <&clks IMX5_CLK_SSI2_ROOT_GATE>;
+ clock-names = "ipg", "baud";
dmas = <&sdma 24 1 0>,
<&sdma 25 1 0>;
dma-names = "rx", "tx";
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x83fcc000 0x4000>;
interrupts = <29>;
- clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
+ clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>,
+ <&clks IMX5_CLK_SSI1_ROOT_GATE>;
+ clock-names = "ipg", "baud";
dmas = <&sdma 28 0 0>,
<&sdma 29 0 0>;
dma-names = "rx", "tx";
compatible = "fsl,imx51-ssi", "fsl,imx21-ssi";
reg = <0x83fe8000 0x4000>;
interrupts = <96>;
- clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>;
+ clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>,
+ <&clks IMX5_CLK_SSI3_ROOT_GATE>;
+ clock-names = "ipg", "baud";
dmas = <&sdma 46 0 0>,
<&sdma 47 0 0>;
dma-names = "rx", "tx";
cpus {
#address-cells = <1>;
#size-cells = <0>;
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a8";
reg = <0x0>;
+ clocks = <&clks IMX5_CLK_ARM>;
+ clock-latency = <61036>;
+ voltage-tolerance = <5>;
+ operating-points = <
+ /* kHz */
+ 166666 850000
+ 400000 900000
+ 800000 1050000
+ 1000000 1200000
+ 1200000 1300000
+ >;
};
};
"fsl,imx21-ssi";
reg = <0x50014000 0x4000>;
interrupts = <30>;
- clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>;
+ clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>,
+ <&clks IMX5_CLK_SSI2_ROOT_GATE>;
+ clock-names = "ipg", "baud";
dmas = <&sdma 24 1 0>,
<&sdma 25 1 0>;
dma-names = "rx", "tx";
"fsl,imx21-ssi";
reg = <0x63fcc000 0x4000>;
interrupts = <29>;
- clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>;
+ clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>,
+ <&clks IMX5_CLK_SSI1_ROOT_GATE>;
+ clock-names = "ipg", "baud";
dmas = <&sdma 28 0 0>,
<&sdma 29 0 0>;
dma-names = "rx", "tx";
"fsl,imx21-ssi";
reg = <0x63fe8000 0x4000>;
interrupts = <96>;
- clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>;
+ clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>,
+ <&clks IMX5_CLK_SSI3_ROOT_GATE>;
+ clock-names = "ipg", "baud";
dmas = <&sdma 46 0 0>,
<&sdma 47 0 0>;
dma-names = "rx", "tx";
#include "imx6qdl.dtsi"
/ {
+ aliases {
+ i2c3 = &i2c4;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
"di0_sel", "di1_sel",
"di0", "di1";
};
+
+&vpu {
+ compatible = "fsl,imx6dl-vpu", "cnm,coda960";
+};
--- /dev/null
+/*
+ * Copyright 2014 Soeren Moch <smoch@web.de>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "TBS2910 Matrix ARM mini PC";
+ compatible = "tbs,imx6q-tbs2910", "fsl,imx6q";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+
+ fan {
+ compatible = "gpio-fan";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_fan>;
+ gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+ gpio-fan,speed-map = <0 0
+ 3000 1>;
+ };
+
+ ir_recv {
+ compatible = "gpio-ir-receiver";
+ gpios = <&gpio3 18 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ir>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_leds>;
+
+ blue {
+ label = "blue_status_led";
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ default-state = "keep";
+ };
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_2p5v: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ };
+
+ reg_3p3v: regulator@1 {
+ compatible = "regulator-fixed";
+ reg = <1>;
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_5p0v: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "5P0V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+ };
+
+ sound-sgtl5000 {
+ audio-codec = <&sgtl5000>;
+ audio-routing =
+ "MIC_IN", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "Headphone Jack", "HP_OUT";
+ compatible = "fsl,imx-audio-sgtl5000";
+ model = "On-board Codec";
+ mux-ext-port = <3>;
+ mux-int-port = <1>;
+ ssi-controller = <&ssi1>;
+ };
+
+ sound-spdif {
+ compatible = "fsl,imx-audio-spdif";
+ model = "On-board SPDIF";
+ spdif-controller = <&spdif>;
+ spdif-out;
+ };
+};
+
+&audmux {
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&hdmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi>;
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ sgtl5000: sgtl5000@0a {
+ clocks = <&clks 201>;
+ compatible = "fsl,sgtl5000";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sgtl5000>;
+ reg = <0x0a>;
+ VDDA-supply = <®_2p5v>;
+ VDDIO-supply = <®_3p3v>;
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ rtc: ds1307@68 {
+ compatible = "dallas,ds1307";
+ reg = <0x68>;
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&sata {
+ status = "okay";
+};
+
+&snvs_poweroff {
+ status = "okay";
+};
+
+&spdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spdif>;
+ status = "okay";
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_5p0v>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_5p0v>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+ wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+ vmmc-supply = <®_3p3v>;
+ status = "okay";
+};
+
+&usdhc4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc4>;
+ bus-width = <8>;
+ non-removable;
+ no-1-8-v;
+ status = "okay";
+};
+
+&iomuxc {
+ imx6q-tbs2910 {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b059
+ >;
+ };
+
+ pinctrl_hdmi: hdmigrp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_ir: irgrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x17059
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x17059
+ >;
+ };
+
+ pinctrl_sgtl5000: sgtl5000grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0
+ >;
+ };
+
+ pinctrl_spdif: spdifgrp {
+ fsl,pins = <MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x13091
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
+ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x17059
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
+ MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x17059
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x17059
+ >;
+ };
+
+ pinctrl_usdhc4: usdhc4grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
+ MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059
+ MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
+ MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
+ MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
+ MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
+ MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
+ MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
+ MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
+ MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
+ >;
+ };
+ };
+
+ gpio_fan {
+ pinctrl_gpio_fan: gpiofangrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x130b1
+ >;
+ };
+ };
+
+ gpio_leds {
+ pinctrl_gpio_leds: gpioledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b1
+ >;
+ };
+ };
+};
};
};
};
+
+&vpu {
+ compatible = "fsl,imx6q-vpu", "cnm,coda960";
+};
};
&ssi1 {
- fsl,mode = "i2s-slave";
status = "okay";
};
};
&ssi1 {
- fsl,mode = "i2s-slave";
status = "okay";
};
};
&ssi1 {
- fsl,mode = "i2s-slave";
status = "okay";
};
&ssi2 {
- fsl,mode = "i2s-slave";
status = "okay";
};
* http://www.gnu.org/copyleft/gpl.html
*/
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
/ {
chosen {
linux,stdout-path = &uart4;
};
+
+ regulators {
+ sound_1v8: regulator@2 {
+ compatible = "regulator-fixed";
+ reg = <2>;
+ regulator-name = "i2s-audio-1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ sound_3v3: regulator@3 {
+ compatible = "regulator-fixed";
+ reg = <3>;
+ regulator-name = "i2s-audio-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+
+ tlv320_mclk: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <19200000>;
+ clock-output-names = "tlv320-mclk";
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "OnboardTLV320AIC3007";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,bitclock-master = <&dailink_master>;
+ simple-audio-card,frame-master = <&dailink_master>;
+ simple-audio-card,widgets =
+ "Microphone", "Mic Jack",
+ "Line", "Line In",
+ "Line", "Line Out",
+ "Speaker", "Speaker",
+ "Headphone", "Headphone Jack";
+ simple-audio-card,routing =
+ "Line Out", "LLOUT",
+ "Line Out", "RLOUT",
+ "Speaker", "SPOP",
+ "Speaker", "SPOM",
+ "Headphone Jack", "HPLOUT",
+ "Headphone Jack", "HPROUT",
+ "MIC3L", "Mic Jack",
+ "MIC3R", "Mic Jack",
+ "Mic Jack", "Mic Bias",
+ "LINE1L", "Line In",
+ "LINE1R", "Line In";
+
+ simple-audio-card,cpu {
+ sound-dai = <&ssi2>;
+ };
+
+ dailink_master: simple-audio-card,codec {
+ sound-dai = <&codec>;
+ clocks = <&tlv320_mclk>;
+ };
+ };
+
};
-&fec {
+&audmux {
status = "okay";
+
+ ssi2 {
+ fsl,audmux-port = <1>;
+ fsl,port-config = <
+ (IMX_AUDMUX_V2_PTCR_TFSDIR |
+ IMX_AUDMUX_V2_PTCR_TFSEL(4) |
+ IMX_AUDMUX_V2_PTCR_TCLKDIR |
+ IMX_AUDMUX_V2_PTCR_TCSEL(4))
+ IMX_AUDMUX_V2_PDCR_RXDSEL(4)
+ >;
+ };
+
+ pins5 {
+ fsl,audmux-port = <4>;
+ fsl,port-config = <
+ 0x00000000
+ IMX_AUDMUX_V2_PDCR_RXDSEL(1)
+ >;
+ };
};
-&gpmi {
+&can1 {
+ status = "okay";
+};
+
+&fec {
status = "okay";
};
};
&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2>;
- clock-frequency = <100000>;
status = "okay";
- tlv320@18 {
- compatible = "ti,tlv320aic3x";
+ codec: tlv320@18 {
+ compatible = "ti,tlv320aic3007";
+ #sound-dai-cells = <0>;
reg = <0x18>;
+ ai3x-micbias-vg = <2>;
+
+ AVDD-supply = <&sound_3v3>;
+ IOVDD-supply = <&sound_3v3>;
+ DRVDD-supply = <&sound_3v3>;
+ DVDD-supply = <&sound_1v8>;
};
stmpe@41 {
};
&i2c3 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3>;
- clock-frequency = <100000>;
+ status = "okay";
+};
+
+&pcie {
+ status = "okay";
+};
+
+&ssi2 {
status = "okay";
};
&usdhc3 {
status = "okay";
};
-
-&iomuxc {
- pinctrl_i2c2: i2c2grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
- MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
- >;
- };
-
- pinctrl_i2c3: i2c3grp {
- fsl,pins = <
- MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
- MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
- >;
- };
-};
};
};
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "disabled";
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "disabled";
+};
+
&ecspi3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi3>;
};
};
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
+ phy-supply = <&vdd_eth_io_reg>;
+ status = "disabled";
+};
+
+&gpmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpmi_nand>;
+ nand-on-flash-bbt;
+ status = "okay";
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
pmic@58 {
compatible = "dlg,da9063";
reg = <0x58>;
- interrupt-parent = <&gpio4>;
- interrupts = <17 0x8>; /* active-low GPIO4_17 */
+ interrupt-parent = <&gpio2>;
+ interrupts = <9 0x8>; /* active-low GPIO2_9 */
regulators {
vddcore_reg: bcore1 {
};
};
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clock-frequency = <100000>;
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ clock-frequency = <100000>;
+};
+
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_hog>;
fsl,pins = <
MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */
- MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000 /* PMIC interrupt */
+ MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x80000000 /* PMIC interrupt */
MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */
MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */
>;
>;
};
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0
+ >;
+ };
+
pinctrl_gpmi_nand: gpminandgrp {
fsl,pins = <
MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
>;
};
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_pcie: pciegrp {
+ fsl,pins = <MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000>;
+ };
+
pinctrl_uart3: uart3grp {
fsl,pins = <
MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
>;
};
- };
-};
-&fec {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_enet>;
- phy-mode = "rgmii";
- phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>;
- phy-supply = <&vdd_eth_io_reg>;
- status = "disabled";
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT16__AUD5_TXC 0x130b0
+ MX6QDL_PAD_DISP0_DAT17__AUD5_TXD 0x110b0
+ MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x130b0
+ MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
+ >;
+ };
+ };
};
-&gpmi {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_gpmi_nand>;
- nand-on-flash-bbt;
+&pcie {
+ pinctrl-name = "default";
+ pinctrl-0 = <&pinctrl_pcie>;
+ reset-gpio = <&gpio4 17 0>;
status = "disabled";
};
};
&ssi1 {
- fsl,mode = "i2s-slave";
status = "okay";
};
"Headphone Jack", "HPOUTR",
"Ext Spk", "SPKOUTL",
"Ext Spk", "SPKOUTR",
- "MICBIAS", "AMIC",
- "IN3R", "MICBIAS",
- "DMIC", "MICBIAS",
- "DMICDAT", "DMIC";
+ "AMIC", "MICBIAS",
+ "IN3R", "AMIC";
mux-int-port = <2>;
mux-ext-port = <3>;
};
codec: wm8962@1a {
compatible = "wlf,wm8962";
reg = <0x1a>;
- clocks = <&clks 201>;
+ clocks = <&clks IMX6QDL_CLK_CKO>;
DCVDD-supply = <®_audio>;
DBVDD-supply = <®_audio>;
AVDD-supply = <®_audio>;
status = "okay";
};
+&snvs_poweroff {
+ status = "okay";
+};
+
&ssi2 {
status = "okay";
};
};
vpu: vpu@02040000 {
+ compatible = "cnm,coda960";
reg = <0x02040000 0x3c000>;
interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>,
<0 12 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "bit", "jpeg";
+ clocks = <&clks IMX6QDL_CLK_VPU_AXI>,
+ <&clks IMX6QDL_CLK_MMDC_CH0_AXI>,
+ <&clks IMX6QDL_CLK_OCRAM>;
+ clock-names = "per", "ahb", "ocram";
+ resets = <&src 1>;
+ iram = <&ocram>;
};
aipstz@0207c000 { /* AIPSTZ1 */
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
<0 20 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ snvs_poweroff: snvs-poweroff@38 {
+ compatible = "fsl,sec-v4.0-poweroff";
+ reg = <0x38 0x4>;
+ status = "disabled";
+ };
};
epit1: epit@020d0000 { /* EPIT1 */
status = "okay";
};
+&snvs_poweroff {
+ status = "okay";
+};
+
&ssi2 {
status = "okay";
};
interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>,
<0 20 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ snvs_poweroff: snvs-poweroff@38 {
+ compatible = "fsl,sec-v4.0-poweroff";
+ reg = <0x38 0x4>;
+ status = "disabled";
+ };
};
epit1: epit@020d0000 {
gpio = <&gpio3 27 0>;
enable-active-high;
};
+
+ reg_peri_3v3: regulator@5 {
+ compatible = "regulator-fixed";
+ reg = <5>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_peri_3v3>;
+ regulator-name = "peri_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_enet_3v3: regulator@6 {
+ compatible = "regulator-fixed";
+ reg = <6>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_3v3>;
+ regulator-name = "enet_3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpios = <&gpio2 6 GPIO_ACTIVE_LOW>;
+ };
};
sound {
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1>;
+ phy-supply = <®_enet_3v3>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&fec2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet2>;
phy-mode = "rgmii";
status = "okay";
};
status = "okay";
};
+&snvs_poweroff {
+ status = "okay";
+};
+
&ssi2 {
status = "okay";
};
MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081
MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081
MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081
+ MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91
+ >;
+ };
+
+ pinctrl_enet_3v3: enet3v3grp {
+ fsl,pins = <
+ MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x80000000
+ >;
+ };
+
+ pinctrl_enet2: enet2grp {
+ fsl,pins = <
+ MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9
+ MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1
+ MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1
+ MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1
+ MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1
+ MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1
+ MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081
+ MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081
+ MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081
+ MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081
+ MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081
+ MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081
>;
};
>;
};
+ pinctrl_peri_3v3: peri3v3grp {
+ fsl,pins = <
+ MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000
+ >;
+ };
+
pinctrl_pwm3: pwm3grp-1 {
fsl,pins = <
MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0
reg = <0x34 0x58>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
};
+
+ snvs_poweroff: snvs-poweroff@38 {
+ compatible = "fsl,sec-v4.0-poweroff";
+ reg = <0x38 0x4>;
+ status = "disabled";
+ };
};
epit1: epit@020d0000 {
};
fec2: ethernet@021b4000 {
- compatible = "fsl,imx6sx-fec";
+ compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec";
reg = <0x021b4000 0x4000>;
interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
<GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
/ {
core-module@10000000 {
- compatible = "arm,core-module-integrator";
+ compatible = "arm,core-module-integrator", "syscon";
reg = <0x10000000 0x200>;
+
+ /* Use core module LED to indicate CPU load */
+ led@0c.0 {
+ compatible = "register-bit-led";
+ offset = <0x0c>;
+ mask = <0x01>;
+ label = "integrator:core_module";
+ linux,default-trigger = "cpu0";
+ default-state = "on";
+ };
};
ebi@12000000 {
reg = <0x19000000 0x1000>;
interrupts = <4>;
};
+
+ syscon {
+ /* Debug registers mapped as syscon */
+ compatible = "syscon";
+ reg = <0x1a000000 0x10>;
+
+ led@04.0 {
+ compatible = "register-bit-led";
+ offset = <0x04>;
+ mask = <0x01>;
+ label = "integrator:green0";
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+ led@04.1 {
+ compatible = "register-bit-led";
+ offset = <0x04>;
+ mask = <0x02>;
+ label = "integrator:yellow";
+ default-state = "off";
+ };
+ led@04.2 {
+ compatible = "register-bit-led";
+ offset = <0x04>;
+ mask = <0x04>;
+ label = "integrator:red";
+ default-state = "off";
+ };
+ led@04.3 {
+ compatible = "register-bit-led";
+ offset = <0x04>;
+ mask = <0x08>;
+ label = "integrator:green1";
+ default-state = "off";
+ };
+ };
};
};
};
};
};
+
+&mdio {
+ ethphy0: ethernet-phy@0 {
+ compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
#gpio-cells = <2>;
gpio,syscon-dev = <&devctrl 0x240>;
};
+
+ pcie@21020000 {
+ compatible = "ti,keystone-pcie","snps,dw-pcie";
+ clocks = <&clkpcie1>;
+ clock-names = "pcie";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0x21021000 0x2000>, <0x21020000 0x1000>, <0x02620128 4>;
+ ranges = <0x81000000 0 0 0x23260000 0x4000 0x4000
+ 0x82000000 0 0x60000000 0x60000000 0 0x10000000>;
+
+ device_type = "pci";
+ num-lanes = <2>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc1 0>, /* INT A */
+ <0 0 0 2 &pcie_intc1 1>, /* INT B */
+ <0 0 0 3 &pcie_intc1 2>, /* INT C */
+ <0 0 0 4 &pcie_intc1 3>; /* INT D */
+
+ pcie_msi_intc1: msi-interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 378 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 379 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 380 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 381 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 382 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 383 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 384 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ pcie_intc1: legacy-interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 373 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 374 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 375 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
};
};
};
};
};
+
+&mdio {
+ ethphy0: ethernet-phy@0 {
+ compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ };
+
+ ethphy1: ethernet-phy@1 {
+ compatible = "marvell,88E1514", "marvell,88E1510", "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ };
+};
#interrupt-cells = <1>;
ti,syscon-dev = <&devctrl 0x2a0>;
};
+
+ pcie@21800000 {
+ compatible = "ti,keystone-pcie", "snps,dw-pcie";
+ clocks = <&clkpcie>;
+ clock-names = "pcie";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ reg = <0x21801000 0x2000>, <0x21800000 0x1000>, <0x02620128 4>;
+ ranges = <0x81000000 0 0 0x23250000 0 0x4000
+ 0x82000000 0 0x50000000 0x50000000 0 0x10000000>;
+
+ device_type = "pci";
+ num-lanes = <2>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc0 0>, /* INT A */
+ <0 0 0 2 &pcie_intc0 1>, /* INT B */
+ <0 0 0 3 &pcie_intc0 2>, /* INT C */
+ <0 0 0 4 &pcie_intc0 3>; /* INT D */
+
+ pcie_msi_intc0: msi-interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 32 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 33 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 34 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ pcie_intc0: legacy-interrupt-controller {
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 27 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 28 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 29 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
};
};
--- /dev/null
+/*
+ * Copyright (C) 2014 Claudio Leite <leitec@staticky.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+/dts-v1/;
+
+#include "kirkwood.dtsi"
+#include "kirkwood-6281.dtsi"
+
+/ {
+ model = "D-Link DIR-665";
+ compatible = "dlink,dir-665", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>; /* 128 MB */
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ stdout-path = &uart0;
+ };
+
+ mbus {
+ pcie-controller {
+ status = "okay";
+
+ pcie@1,0 {
+ status = "okay";
+ };
+ };
+ };
+
+ ocp@f1000000 {
+ pinctrl: pin-controller@10000 {
+ pinctrl-0 =< &pmx_led_usb
+ &pmx_led_internet_blue
+ &pmx_led_internet_amber
+ &pmx_led_5g &pmx_led_status_blue
+ &pmx_led_wps &pmx_led_status_amber
+ &pmx_led_24g
+ &pmx_btn_restart &pmx_btn_wps>;
+ pinctrl-names = "default";
+
+ pmx_led_usb: pmx-led-usb {
+ marvell,pins = "mpp12";
+ marvell,function = "gpio";
+ };
+ pmx_led_internet_blue: pmx-led-internet-blue {
+ marvell,pins = "mpp42";
+ marvell,function = "gpio";
+ };
+ pmx_led_internet_amber: pmx-led-internet-amber {
+ marvell,pins = "mpp43";
+ marvell,function = "gpio";
+ };
+ pmx_led_5g: pmx-led-5g {
+ marvell,pins = "mpp44";
+ marvell,function = "gpio";
+ };
+ pmx_led_status_blue: pmx-led-status-blue {
+ marvell,pins = "mpp45";
+ marvell,function = "gpio";
+ };
+ pmx_led_wps: pmx-led-wps {
+ marvell,pins = "mpp47";
+ marvell,function = "gpio";
+ };
+ pmx_led_status_amber: pmx-led-status-amber {
+ marvell,pins = "mpp48";
+ marvell,function = "gpio";
+ };
+ pmx_led_24g: pmx-led-24g {
+ marvell,pins = "mpp49";
+ marvell,function = "gpio";
+ };
+ pmx_btn_restart: pmx-btn-restart {
+ marvell,pins = "mpp28";
+ marvell,function = "gpio";
+ };
+ pmx_btn_wps: pmx-btn-wps {
+ marvell,pins = "mpp46";
+ marvell,function = "gpio";
+ };
+ };
+
+ spi@10600 {
+ status = "okay";
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "mxicy,mx25l12805d";
+ spi-max-frequency = <50000000>;
+ reg = <0>;
+
+ partition@0 {
+ label = "uboot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "nvram";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "kernel";
+ reg = <0x40000 0x180000>;
+ };
+
+ partition@1c0000 {
+ label = "rootfs";
+ reg = <0x1c0000 0xe00000>;
+ };
+
+ cal_data: partition@fc0000 {
+ label = "cal_data";
+ reg = <0xfc0000 0x10000>;
+ read-only;
+ };
+
+ partition@fd0000 {
+ label = "lang_pack";
+ reg = <0xfd0000 0x30000>;
+ read-only;
+ };
+ };
+ };
+
+ serial@12000 {
+ status = "okay";
+ };
+
+ i2c@11000 {
+ status = "okay";
+ };
+
+ ehci@50000 {
+ status = "okay";
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+
+ blue-usb {
+ label = "dir665:blue:usb";
+ gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
+ };
+ blue-internet {
+ /* Can only be turned on if the Internet
+ * Ethernet port has Link
+ */
+ label = "dir665:blue:internet";
+ gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+ };
+ amber-internet {
+ label = "dir665:amber:internet";
+ gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+ };
+ blue-wifi5g {
+ label = "dir665:blue:5g";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+ blue-status {
+ label = "dir665:blue:status";
+ gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+ };
+ blue-wps {
+ label = "dir665:blue:wps";
+ gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+ };
+ amber-status {
+ label = "dir665:amber:status";
+ gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>;
+ };
+ blue-24g {
+ label = "dir665:blue:24g";
+ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+ };
+ wps {
+ label = "wps";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ dsa@0 {
+ compatible = "marvell,dsa";
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ dsa,ethernet = <ð0port>;
+ dsa,mii-bus = <&mdio>;
+
+ switch@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0 0>; /* MDIO address 0, switch 0 in tree */
+
+ port@0 {
+ reg = <0>;
+ label = "lan4";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "lan3";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "lan2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "lan1";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "wan";
+ };
+
+ port@6 {
+ reg = <6>;
+ label = "cpu";
+ };
+ };
+ };
+};
+
+&mdio {
+ status = "okay";
+};
+
+/* eth0 is connected to a Marvell 88E6171 switch, without a PHY. So set
+ * fixed speed and duplex. */
+ð0 {
+ status = "okay";
+
+ ethernet0-port@0 {
+ speed = <1000>;
+ duplex = <1>;
+ };
+};
+
+/* eth1 is connected to the switch as well. However DSA only supports a
+ * single CPU port. So leave this port disabled to avoid confusion. */
+
+ð1 {
+ status = "disabled";
+};
+
+/* There is no battery on the boards, so the RTC does not keep time
+ * when there is no power, making it useless. */
+&rtc {
+ status = "disabled";
+};
s35390a: s35390a@30 {
status = "disabled";
- compatible = "ssi,s35390a";
+ compatible = "sii,s35390a";
reg = <0x30>;
};
};
--- /dev/null
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+ model = "LS1021A QDS Board";
+
+ aliases {
+ enet0_rgmii_phy = &rgmii_phy1;
+ enet1_rgmii_phy = &rgmii_phy2;
+ enet2_rgmii_phy = &rgmii_phy3;
+ enet0_sgmii_phy = &sgmii_phy1c;
+ enet1_sgmii_phy = &sgmii_phy1d;
+ };
+};
+
+&dspi0 {
+ bus-num = <0>;
+ status = "okay";
+
+ dspiflash: at45db021d@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash";
+ spi-max-frequency = <16000000>;
+ spi-cpol;
+ spi-cpha;
+ reg = <0>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+
+ pca9547: mux@77 {
+ reg = <0x77>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ i2c@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0>;
+
+ ds3232: rtc@68 {
+ compatible = "dallas,ds3232";
+ reg = <0x68>;
+ interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ i2c@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+
+ ina220@40 {
+ compatible = "ti,ina220";
+ reg = <0x40>;
+ shunt-resistor = <1000>;
+ };
+
+ ina220@41 {
+ compatible = "ti,ina220";
+ reg = <0x41>;
+ shunt-resistor = <1000>;
+ };
+ };
+
+ i2c@3 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x3>;
+
+ eeprom@56 {
+ compatible = "atmel,24c512";
+ reg = <0x56>;
+ };
+
+ eeprom@57 {
+ compatible = "atmel,24c512";
+ reg = <0x57>;
+ };
+
+ adt7461a@4c {
+ compatible = "adi,adt7461a";
+ reg = <0x4c>;
+ };
+ };
+ };
+};
+
+&ifc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ /* NOR, NAND Flashes and FPGA on board */
+ ranges = <0x0 0x0 0x0 0x60000000 0x08000000
+ 0x2 0x0 0x0 0x7e800000 0x00010000
+ 0x3 0x0 0x0 0x7fb00000 0x00000100>;
+ status = "okay";
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+
+ fpga: board-control@3,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ reg = <0x3 0x0 0x0000100>;
+ bank-width = <1>;
+ device-width = <1>;
+ ranges = <0 3 0 0x100>;
+
+ mdio-mux-emi1 {
+ compatible = "mdio-mux-mmioreg";
+ mdio-parent-bus = <&mdio0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x54 1>; /* BRDCFG4 */
+ mux-mask = <0xe0>; /* EMI1[2:0] */
+
+ /* Onboard PHYs */
+ ls1021amdio0: mdio@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rgmii_phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ };
+
+ ls1021amdio1: mdio@20 {
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rgmii_phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+ };
+
+ ls1021amdio2: mdio@40 {
+ reg = <0x40>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ rgmii_phy3: ethernet-phy@3 {
+ reg = <0x3>;
+ };
+ };
+
+ ls1021amdio3: mdio@60 {
+ reg = <0x60>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ sgmii_phy1c: ethernet-phy@1c {
+ reg = <0x1c>;
+ };
+ };
+
+ ls1021amdio4: mdio@80 {
+ reg = <0x80>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ sgmii_phy1d: ethernet-phy@1d {
+ reg = <0x1d>;
+ };
+ };
+ };
+ };
+};
+
+&lpuart0 {
+ status = "okay";
+};
+
+&mdio0 {
+ tbi0: tbi-phy@8 {
+ reg = <0x8>;
+ device_type = "tbi-phy";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "ls1021a.dtsi"
+
+/ {
+ model = "LS1021A TWR Board";
+
+ aliases {
+ enet2_rgmii_phy = &rgmii_phy1;
+ enet0_sgmii_phy = &sgmii_phy2;
+ enet1_sgmii_phy = &sgmii_phy0;
+ };
+};
+
+&dspi1 {
+ bus-num = <0>;
+ status = "okay";
+
+ dspiflash: s25fl064k@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "spansion,s25fl064k";
+ spi-max-frequency = <16000000>;
+ spi-cpol;
+ spi-cpha;
+ reg = <0>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&i2c1 {
+ status = "okay";
+};
+
+&ifc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ /* NOR Flash on board */
+ ranges = <0x0 0x0 0x0 0x60000000 0x08000000>;
+ status = "okay";
+
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ };
+};
+
+&lpuart0 {
+ status = "okay";
+};
+
+&mdio0 {
+ sgmii_phy0: ethernet-phy@0 {
+ reg = <0x0>;
+ };
+ rgmii_phy1: ethernet-phy@1 {
+ reg = <0x1>;
+ };
+ sgmii_phy2: ethernet-phy@2 {
+ reg = <0x2>;
+ };
+ tbi1: tbi-phy@1f {
+ reg = <0x1f>;
+ device_type = "tbi-phy";
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
--- /dev/null
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "skeleton64.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "fsl,ls1021a";
+ interrupt-parent = <&gic>;
+
+ aliases {
+ serial0 = &lpuart0;
+ serial1 = &lpuart1;
+ serial2 = &lpuart2;
+ serial3 = &lpuart3;
+ serial4 = &lpuart4;
+ serial5 = &lpuart5;
+ sysclk = &sysclk;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@f00 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0xf00>;
+ clocks = <&cluster1_clk>;
+ };
+
+ cpu@f01 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0xf01>;
+ clocks = <&cluster1_clk>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu {
+ compatible = "arm,cortex-a7-pmu";
+ interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ device_type = "soc";
+ interrupt-parent = <&gic>;
+ ranges;
+
+ gic: interrupt-controller@1400000 {
+ compatible = "arm,cortex-a7-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x0 0x1401000 0x0 0x1000>,
+ <0x0 0x1402000 0x0 0x1000>,
+ <0x0 0x1404000 0x0 0x2000>,
+ <0x0 0x1406000 0x0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+
+ };
+
+ ifc: ifc@1530000 {
+ compatible = "fsl,ifc", "simple-bus";
+ reg = <0x0 0x1530000 0x0 0x10000>;
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ dcfg: dcfg@1ee0000 {
+ compatible = "fsl,ls1021a-dcfg", "syscon";
+ reg = <0x0 0x1ee0000 0x0 0x10000>;
+ big-endian;
+ };
+
+ esdhc: esdhc@1560000 {
+ compatible = "fsl,esdhc";
+ reg = <0x0 0x1560000 0x0 0x10000>;
+ interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <0>;
+ voltage-ranges = <1800 1800 3300 3300>;
+ sdhci,auto-cmd12;
+ big-endian;
+ bus-width = <4>;
+ status = "disabled";
+ };
+
+ scfg: scfg@1570000 {
+ compatible = "fsl,ls1021a-scfg", "syscon";
+ reg = <0x0 0x1570000 0x0 0x10000>;
+ };
+
+ clockgen: clocking@1ee1000 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x0 0x0 0x1ee1000 0x10000>;
+
+ sysclk: sysclk {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-output-names = "sysclk";
+ };
+
+ cga_pll1: pll@800 {
+ compatible = "fsl,qoriq-core-pll-2.0";
+ #clock-cells = <1>;
+ reg = <0x800 0x10>;
+ clocks = <&sysclk>;
+ clock-output-names = "cga-pll1", "cga-pll1-div2",
+ "cga-pll1-div4";
+ };
+
+ platform_clk: pll@c00 {
+ compatible = "fsl,qoriq-core-pll-2.0";
+ #clock-cells = <1>;
+ reg = <0xc00 0x10>;
+ clocks = <&sysclk>;
+ clock-output-names = "platform-clk", "platform-clk-div2";
+ };
+
+ cluster1_clk: clk0c0@0 {
+ compatible = "fsl,qoriq-core-mux-2.0";
+ #clock-cells = <0>;
+ reg = <0x0 0x10>;
+ clock-names = "pll1cga", "pll1cga-div2", "pll1cga-div4";
+ clocks = <&cga_pll1 0>, <&cga_pll1 1>, <&cga_pll1 2>;
+ clock-output-names = "cluster1-clk";
+ };
+ };
+
+ dspi0: dspi@2100000 {
+ compatible = "fsl,vf610-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2100000 0x0 0x10000>;
+ interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "dspi";
+ clocks = <&platform_clk 1>;
+ spi-num-chipselects = <5>;
+ big-endian;
+ status = "disabled";
+ };
+
+ dspi1: dspi@2110000 {
+ compatible = "fsl,vf610-dspi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2110000 0x0 0x10000>;
+ interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "dspi";
+ clocks = <&platform_clk 1>;
+ spi-num-chipselects = <5>;
+ big-endian;
+ status = "disabled";
+ };
+
+ i2c0: i2c@2180000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2180000 0x0 0x10000>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "i2c";
+ clocks = <&platform_clk 1>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@2190000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2190000 0x0 0x10000>;
+ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "i2c";
+ clocks = <&platform_clk 1>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@21a0000 {
+ compatible = "fsl,vf610-i2c";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x21a0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+ clock-names = "i2c";
+ clocks = <&platform_clk 1>;
+ status = "disabled";
+ };
+
+ uart0: serial@21c0500 {
+ compatible = "fsl,16550-FIFO64", "ns16550a";
+ reg = <0x0 0x21c0500 0x0 0x100>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <0>;
+ fifo-size = <15>;
+ status = "disabled";
+ };
+
+ uart1: serial@21c0600 {
+ compatible = "fsl,16550-FIFO64", "ns16550a";
+ reg = <0x0 0x21c0600 0x0 0x100>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <0>;
+ fifo-size = <15>;
+ status = "disabled";
+ };
+
+ uart2: serial@21d0500 {
+ compatible = "fsl,16550-FIFO64", "ns16550a";
+ reg = <0x0 0x21d0500 0x0 0x100>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <0>;
+ fifo-size = <15>;
+ status = "disabled";
+ };
+
+ uart3: serial@21d0600 {
+ compatible = "fsl,16550-FIFO64", "ns16550a";
+ reg = <0x0 0x21d0600 0x0 0x100>;
+ interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <0>;
+ fifo-size = <15>;
+ status = "disabled";
+ };
+
+ lpuart0: serial@2950000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x2950000 0x0 0x1000>;
+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&sysclk>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart1: serial@2960000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x2960000 0x0 0x1000>;
+ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&platform_clk 1>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart2: serial@2970000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x2970000 0x0 0x1000>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&platform_clk 1>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart3: serial@2980000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x2980000 0x0 0x1000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&platform_clk 1>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart4: serial@2990000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x2990000 0x0 0x1000>;
+ interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&platform_clk 1>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ lpuart5: serial@29a0000 {
+ compatible = "fsl,ls1021a-lpuart";
+ reg = <0x0 0x29a0000 0x0 0x1000>;
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&platform_clk 1>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ wdog0: watchdog@2ad0000 {
+ compatible = "fsl,imx21-wdt";
+ reg = <0x0 0x2ad0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&platform_clk 1>;
+ clock-names = "wdog-en";
+ big-endian;
+ };
+
+ sai1: sai@2b50000 {
+ compatible = "fsl,vf610-sai";
+ reg = <0x0 0x2b50000 0x0 0x10000>;
+ interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&platform_clk 1>;
+ clock-names = "sai";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 47>,
+ <&edma0 1 46>;
+ big-endian;
+ status = "disabled";
+ };
+
+ sai2: sai@2b60000 {
+ compatible = "fsl,vf610-sai";
+ reg = <0x0 0x2b60000 0x0 0x10000>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&platform_clk 1>;
+ clock-names = "sai";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 1 45>,
+ <&edma0 1 44>;
+ big-endian;
+ status = "disabled";
+ };
+
+ edma0: edma@2c00000 {
+ #dma-cells = <2>;
+ compatible = "fsl,vf610-edma";
+ reg = <0x0 0x2c00000 0x0 0x10000>,
+ <0x0 0x2c10000 0x0 0x10000>,
+ <0x0 0x2c20000 0x0 0x10000>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma-tx", "edma-err";
+ dma-channels = <32>;
+ big-endian;
+ clock-names = "dmamux0", "dmamux1";
+ clocks = <&platform_clk 1>,
+ <&platform_clk 1>;
+ };
+
+ mdio0: mdio@2d24000 {
+ compatible = "gianfar";
+ device_type = "mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x0 0x2d24000 0x0 0x4000>;
+ };
+
+ usb@8600000 {
+ compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr";
+ reg = <0x0 0x8600000 0x0 0x1000>;
+ interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ phy_type = "ulpi";
+ };
+
+ usb3@3100000 {
+ compatible = "snps,dwc3";
+ reg = <0x0 0x3100000 0x0 0x10000>;
+ interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ dr_mode = "host";
+ };
+ };
+};
/ {
interrupt-parent = <&gic>;
+ L2: l2-cache-controller@c4200000 {
+ compatible = "arm,pl310-cache";
+ reg = <0xc4200000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
gic: interrupt-controller@c4301000 {
compatible = "arm,cortex-a9-gic";
reg = <0xc4301000 0x1000>,
clocks = <&clk81>;
status = "disabled";
};
+
+ i2c_AO: i2c@c8100500 {
+ compatible = "amlogic,meson6-i2c";
+ reg = <0xc8100500 0x20>;
+ interrupts = <0 92 1>;
+ clocks = <&clk81>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c_A: i2c@c1108500 {
+ compatible = "amlogic,meson6-i2c";
+ reg = <0xc1108500 0x20>;
+ interrupts = <0 21 1>;
+ clocks = <&clk81>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c_B: i2c@c11087c0 {
+ compatible = "amlogic,meson6-i2c";
+ reg = <0xc11087c0 0x20>;
+ interrupts = <0 128 1>;
+ clocks = <&clk81>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
};
}; /* end of / */
/ {
model = "Geniatech ATV1200";
- compatible = "geniatech,atv1200";
+ compatible = "geniatech,atv1200", "amlogic,meson6";
aliases {
serial0 = &uart_AO;
cpu@200 {
device_type = "cpu";
compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
reg = <0x200>;
};
cpu@201 {
device_type = "cpu";
compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
reg = <0x201>;
};
};
--- /dev/null
+/*
+ * Copyright 2014 Carlo Caione <carlo@caione.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "meson.dtsi"
+
+/ {
+ model = "Amlogic Meson8 SoC";
+ compatible = "amlogic,meson8";
+
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@200 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ reg = <0x200>;
+ };
+
+ cpu@201 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ reg = <0x201>;
+ };
+
+ cpu@202 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ reg = <0x202>;
+ };
+
+ cpu@203 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ next-level-cache = <&L2>;
+ reg = <0x203>;
+ };
+ };
+
+ clk81: clk@0 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <141666666>;
+ };
+}; /* end of / */
--- /dev/null
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Howard Chen <ibanezchen@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt6592.dtsi"
+
+/ {
+ model = "mt6592 evb";
+ compatible = "mediatek,mt6592-evb", "mediatek,mt6592";
+
+ memory {
+ reg = <0x80000000 0x40000000>;
+ };
+};
+
--- /dev/null
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Howard Chen <ibanezchen@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton.dtsi"
+
+/ {
+ compatible = "mediatek,mt6592";
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ };
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x2>;
+ };
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x3>;
+ };
+ cpu@4 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x4>;
+ };
+ cpu@5 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x5>;
+ };
+ cpu@6 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x6>;
+ };
+ cpu@7 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x7>;
+ };
+ };
+
+ system_clk: dummy13m {
+ compatible = "fixed-clock";
+ clock-frequency = <13000000>;
+ #clock-cells = <0>;
+ };
+
+ rtc_clk: dummy32k {
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ #clock-cells = <0>;
+ };
+
+ timer: timer@10008000 {
+ compatible = "mediatek,mt6577-timer";
+ reg = <0x10008000 0x80>;
+ interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&system_clk>, <&rtc_clk>;
+ clock-names = "system-clk", "rtc-clk";
+ };
+
+ gic: interrupt-controller@10211000 {
+ compatible = "arm,cortex-a7-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x10211000 0x1000>,
+ <0x10212000 0x1000>;
+ };
+
+};
+
--- /dev/null
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Joe.C <yingjoe.chen@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt8127.dtsi"
+
+/ {
+ model = "MediaTek MT8127 Moose Board";
+ compatible = "mediatek,mt8127-moose", "mediatek,mt8127";
+
+ memory {
+ reg = <0 0x80000000 0 0x40000000>;
+ };
+};
--- /dev/null
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Joe.C <yingjoe.chen@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton64.dtsi"
+
+/ {
+ compatible = "mediatek,mt8127";
+ interrupt-parent = <&gic>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x0>;
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x1>;
+ };
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x2>;
+ };
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x3>;
+ };
+
+ };
+
+ clocks {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+
+ system_clk: dummy13m {
+ compatible = "fixed-clock";
+ clock-frequency = <13000000>;
+ #clock-cells = <0>;
+ };
+
+ rtc_clk: dummy32k {
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ #clock-cells = <0>;
+ };
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+
+ timer: timer@10008000 {
+ compatible = "mediatek,mt8127-timer",
+ "mediatek,mt6577-timer";
+ reg = <0 0x10008000 0 0x80>;
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&system_clk>, <&rtc_clk>;
+ clock-names = "system-clk", "rtc-clk";
+ };
+
+ gic: interrupt-controller@10211000 {
+ compatible = "arm,cortex-a7-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0 0x10211000 0 0x1000>,
+ <0 0x10212000 0 0x1000>,
+ <0 0x10214000 0 0x2000>,
+ <0 0x10216000 0 0x2000>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Joe.C <yingjoe.chen@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+#include "mt8135.dtsi"
+
+/ {
+ model = "MediaTek MT8135 evaluation board";
+ compatible = "mediatek,mt8135-evbp1", "mediatek,mt8135";
+
+ memory {
+ reg = <0 0x80000000 0 0x40000000>;
+ };
+};
--- /dev/null
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Joe.C <yingjoe.chen@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include "skeleton64.dtsi"
+
+/ {
+ compatible = "mediatek,mt8135";
+ interrupt-parent = <&gic>;
+
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ };
+
+ cluster1 {
+ core0 {
+ cpu = <&cpu2>;
+ };
+ core1 {
+ cpu = <&cpu3>;
+ };
+ };
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x000>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0x001>;
+ };
+
+ cpu2: cpu@100 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x100>;
+ };
+
+ cpu3: cpu@101 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a15";
+ reg = <0x101>;
+ };
+ };
+
+ clocks {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+
+ system_clk: dummy13m {
+ compatible = "fixed-clock";
+ clock-frequency = <13000000>;
+ #clock-cells = <0>;
+ };
+
+ rtc_clk: dummy32k {
+ compatible = "fixed-clock";
+ clock-frequency = <32000>;
+ #clock-cells = <0>;
+ };
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+
+ timer: timer@10008000 {
+ compatible = "mediatek,mt8135-timer",
+ "mediatek,mt6577-timer";
+ reg = <0 0x10008000 0 0x80>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&system_clk>, <&rtc_clk>;
+ clock-names = "system-clk", "rtc-clk";
+ };
+
+ gic: interrupt-controller@10211000 {
+ compatible = "arm,cortex-a15-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0 0x10211000 0 0x1000>,
+ <0 0x10212000 0 0x1000>,
+ <0 0x10214000 0 0x2000>,
+ <0 0x10216000 0 0x2000>;
+ };
+ };
+};
ethernet@gpmc {
compatible = "smsc,lan9221", "smsc,lan9115";
bank-width = <2>;
- gpmc,mux-add-data;
- gpmc,cs-on-ns = <1>;
- gpmc,cs-rd-off-ns = <180>;
- gpmc,cs-wr-off-ns = <180>;
- gpmc,adv-rd-off-ns = <18>;
- gpmc,adv-wr-off-ns = <48>;
- gpmc,oe-on-ns = <54>;
- gpmc,oe-off-ns = <168>;
- gpmc,we-on-ns = <54>;
- gpmc,we-off-ns = <168>;
- gpmc,rd-cycle-ns = <186>;
- gpmc,wr-cycle-ns = <186>;
- gpmc,access-ns = <144>;
- gpmc,page-burst-access-ns = <24>;
- gpmc,bus-turnaround-ns = <90>;
- gpmc,cycle2cycle-delay-ns = <90>;
- gpmc,cycle2cycle-samecsen;
- gpmc,cycle2cycle-diffcsen;
+ gpmc,device-width = <1>;
+ gpmc,cycle2cycle-samecsen = <1>;
+ gpmc,cycle2cycle-diffcsen = <1>;
+ gpmc,cs-on-ns = <5>;
+ gpmc,cs-rd-off-ns = <150>;
+ gpmc,cs-wr-off-ns = <150>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <15>;
+ gpmc,adv-wr-off-ns = <40>;
+ gpmc,oe-on-ns = <45>;
+ gpmc,oe-off-ns = <140>;
+ gpmc,we-on-ns = <45>;
+ gpmc,we-off-ns = <140>;
+ gpmc,rd-cycle-ns = <155>;
+ gpmc,wr-cycle-ns = <155>;
+ gpmc,access-ns = <120>;
+ gpmc,page-burst-access-ns = <20>;
+ gpmc,bus-turnaround-ns = <75>;
+ gpmc,cycle2cycle-delay-ns = <75>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ gpmc,wr-access-ns = <0>;
vddvario-supply = <&vddvario>;
vdd33a-supply = <&vdd33a>;
reg-io-width = <4>;
#include "omap-gpmc-smsc911x.dtsi"
&gpmc {
- ranges = <3 0 0x10000000 0x00000400>,
+ ranges = <3 0 0x10000000 0x1000000>, /* CS3: 16MB for UART */
<7 0 0x2c000000 0x01000000>;
/*
*/
uart@3,0 {
compatible = "ns16550a";
- reg = <3 0 0x100>;
+ reg = <3 0 8>; /* CS3, offset 0, IO size 8 */
+ bank-width = <2>;
+ reg-shift = <1>;
+ reg-io-width = <1>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */
+ clock-frequency = <1843200>;
+ current-speed = <115200>;
+ gpmc,mux-add-data = <0>;
+ gpmc,device-width = <1>;
+ gpmc,wait-pin = <1>;
+ gpmc,cycle2cycle-samecsen = <1>;
+ gpmc,cycle2cycle-diffcsen = <1>;
+ gpmc,cs-on-ns = <5>;
+ gpmc,cs-rd-off-ns = <155>;
+ gpmc,cs-wr-off-ns = <155>;
+ gpmc,adv-on-ns = <15>;
+ gpmc,adv-rd-off-ns = <40>;
+ gpmc,adv-wr-off-ns = <40>;
+ gpmc,oe-on-ns = <45>;
+ gpmc,oe-off-ns = <145>;
+ gpmc,we-on-ns = <45>;
+ gpmc,we-off-ns = <145>;
+ gpmc,rd-cycle-ns = <155>;
+ gpmc,wr-cycle-ns = <155>;
+ gpmc,access-ns = <145>;
+ gpmc,page-burst-access-ns = <20>;
+ gpmc,bus-turnaround-ns = <20>;
+ gpmc,cycle2cycle-delay-ns = <20>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <45>;
+ gpmc,wr-access-ns = <145>;
+ };
+ uart@3,1 {
+ compatible = "ns16550a";
+ reg = <3 0x100 8>; /* CS3, offset 0x100, IO size 8 */
+ bank-width = <2>;
+ reg-shift = <1>;
+ reg-io-width = <1>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */
+ clock-frequency = <1843200>;
+ current-speed = <115200>;
+ };
+ uart@3,2 {
+ compatible = "ns16550a";
+ reg = <3 0x200 8>; /* CS3, offset 0x200, IO size 8 */
+ bank-width = <2>;
+ reg-shift = <1>;
+ reg-io-width = <1>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <6 IRQ_TYPE_EDGE_RISING>; /* gpio102 */
+ clock-frequency = <1843200>;
+ current-speed = <115200>;
+ };
+ uart@3,3 {
+ compatible = "ns16550a";
+ reg = <3 0x300 8>; /* CS3, offset 0x300, IO size 8 */
bank-width = <2>;
reg-shift = <1>;
reg-io-width = <1>;
};
&gpmc {
- ranges = <0 0 0x04000000 0x10000000>;
+ ranges = <0 0 0x04000000 0x1000000>; /* CS0: 16MB for OneNAND */
/* gpio-irq for dma: 26 */
onenand@0,0 {
#address-cells = <1>;
#size-cells = <1>;
- reg = <0 0 0x10000000>;
+ reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
gpmc,sync-read;
gpmc,burst-length = <16>;
interrupts = <26>, <34>;
interrupt-names = "dsp", "iva";
ti,hwmods = "mailbox";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <6>;
mbox_dsp: dsp {
interrupts = <21 IRQ_TYPE_LEVEL_LOW>; /* gpio149 */
reg = <5 0x300 0xf>;
bank-width = <2>;
- gpmc,mux-add-data;
- };
+ gpmc,sync-clk-ps = <0>;
+ gpmc,mux-add-data = <2>;
+ gpmc,device-width = <1>;
+ gpmc,cycle2cycle-samecsen = <1>;
+ gpmc,cycle2cycle-diffcsen = <1>;
+ gpmc,cs-on-ns = <7>;
+ gpmc,cs-rd-off-ns = <233>;
+ gpmc,cs-wr-off-ns = <233>;
+ gpmc,adv-on-ns = <22>;
+ gpmc,adv-rd-off-ns = <60>;
+ gpmc,adv-wr-off-ns = <60>;
+ gpmc,oe-on-ns = <67>;
+ gpmc,oe-off-ns = <210>;
+ gpmc,we-on-ns = <67>;
+ gpmc,we-off-ns = <210>;
+ gpmc,rd-cycle-ns = <233>;
+ gpmc,wr-cycle-ns = <233>;
+ gpmc,access-ns = <233>;
+ gpmc,page-burst-access-ns = <30>;
+ gpmc,bus-turnaround-ns = <30>;
+ gpmc,cycle2cycle-delay-ns = <30>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ gpmc,wr-access-ns = <0>;
+ };
};
reg = <0x48094000 0x200>;
interrupts = <26>;
ti,hwmods = "mailbox";
+ #mbox-cells = <1>;
ti,mbox-num-users = <4>;
ti,mbox-num-fifos = <6>;
mbox_dsp: dsp {
bus-width = <4>;
cap-power-off-card;
};
+
+&dss {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &dss_dpi_pins_common
+ &dss_dpi_pins_cm_t35x
+ >;
+};
+
bus-width = <4>;
cap-power-off-card;
};
+
+&dss {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &dss_dpi_pins_common
+ &dss_dpi_pins_cm_t35x
+ >;
+};
+
};
};
+&omap3_pmx_wkup {
+ dss_dpi_pins_cm_t3730: pinmux_dss_dpi_pins_cm_t3730 {
+ pinctrl-single,pins = <
+ OMAP3_WKUP_IOPAD(0x2a08, PIN_OUTPUT | MUX_MODE3) /* sys_boot0.dss_data18 */
+ OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE3) /* sys_boot1.dss_data19 */
+ OMAP3_WKUP_IOPAD(0x2a10, PIN_OUTPUT | MUX_MODE3) /* sys_boot3.dss_data20 */
+ OMAP3_WKUP_IOPAD(0x2a12, PIN_OUTPUT | MUX_MODE3) /* sys_boot4.dss_data21 */
+ OMAP3_WKUP_IOPAD(0x2a14, PIN_OUTPUT | MUX_MODE3) /* sys_boot5.dss_data22 */
+ OMAP3_WKUP_IOPAD(0x2a16, PIN_OUTPUT | MUX_MODE3) /* sys_boot6.dss_data23 */
+ >;
+ };
+};
+
&omap3_pmx_core {
mmc2_pins: pinmux_mmc2_pins {
bus-width = <4>;
cap-power-off-card;
};
+
+&dss {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &dss_dpi_pins_common
+ &dss_dpi_pins_cm_t3730
+ >;
+};
+
compatible = "usb-nop-xceiv";
vcc-supply = <&hsusb2_power>;
};
+
+ ads7846reg: ads7846-reg {
+ compatible = "regulator-fixed";
+ regulator-name = "ads7846-reg";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ tv0: connector@1 {
+ compatible = "svideo-connector";
+ label = "tv";
+
+ port {
+ tv_connector_in: endpoint {
+ remote-endpoint = <&venc_out>;
+ };
+ };
+ };
};
&omap3_pmx_core {
OMAP3_CORE1_IOPAD(0x21e2, PIN_OUTPUT | MUX_MODE4) /* sys_clkout2.gpio_186 */
>;
};
+
+ dss_dpi_pins_common: pinmux_dss_dpi_pins_common {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ >;
+ };
+
+ dss_dpi_pins_cm_t35x: pinmux_dss_dpi_pins_cm_t35x {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ >;
+ };
+
+ ads7846_pins: pinmux_ads7846_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20ba, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs6.gpio_57 */
+ >;
+ };
+
+ mcspi1_pins: pinmux_mcspi1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c8, PIN_INPUT | MUX_MODE0) /* mcspi1_clk */
+ OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0) /* mcspi1_simo */
+ OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0) /* mcspi1_somi */
+ OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcspi1_cs0 */
+ >;
+ };
+
+ i2c1_pins: pinmux_i2c1_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21ba, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_scl */
+ OMAP3_CORE1_IOPAD(0x21bc, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c1_sda */
+ >;
+ };
+
+ mcbsp2_pins: pinmux_mcbsp2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x213c, PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx */
+ OMAP3_CORE1_IOPAD(0x213e, PIN_INPUT | MUX_MODE0) /* mcbsp2_clkx */
+ OMAP3_CORE1_IOPAD(0x2140, PIN_INPUT | MUX_MODE0) /* mcbsp2_dr */
+ OMAP3_CORE1_IOPAD(0x2142, PIN_OUTPUT | MUX_MODE0) /* mcbsp2_dx */
+ >;
+ };
};
&uart3 {
};
&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+
clock-frequency = <400000>;
+
+ at24@50 {
+ compatible = "at24,24c02";
+ pagesize = <16>;
+ reg = <0x50>;
+ };
};
&i2c3 {
clock-frequency = <400000>;
};
+
&usbhshost {
port1-mode = "ehci-phy";
port2-mode = "ehci-phy";
&usbhsehci {
phys = <&hsusb1_phy &hsusb2_phy>;
};
+
+&mcspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcspi1_pins>;
+
+ /* touch controller */
+ ads7846@0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ads7846_pins>;
+
+ compatible = "ti,ads7846";
+ vcc-supply = <&ads7846reg>;
+
+ reg = <0>; /* CS0 */
+ spi-max-frequency = <1500000>;
+
+ interrupt-parent = <&gpio2>;
+ interrupts = <25 0>; /* gpio_57 */
+ pendown-gpio = <&gpio2 25 0>;
+
+ ti,x-min = /bits/ 16 <0x0>;
+ ti,x-max = /bits/ 16 <0x0fff>;
+ ti,y-min = /bits/ 16 <0x0>;
+ ti,y-max = /bits/ 16 <0x0fff>;
+
+ ti,x-plate-ohms = /bits/ 16 <180>;
+ ti,pressure-max = /bits/ 16 <255>;
+
+ ti,debounce-max = /bits/ 16 <30>;
+ ti,debounce-tol = /bits/ 16 <10>;
+ ti,debounce-rep = /bits/ 16 <1>;
+
+ linux,wakeup;
+ };
+};
+
+&venc {
+ status = "ok";
+
+ port {
+ venc_out: endpoint {
+ remote-endpoint = <&tv_connector_in>;
+ ti,channels = <2>;
+ };
+ };
+};
+
+&mcbsp2 {
+ status = "ok";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&mcbsp2_pins>;
+};
cpu0-supply = <&vcc>;
};
};
+
+ sound {
+ compatible = "ti,omap-twl4030";
+ ti,model = "cm-t35";
+
+ ti,mcbsp = <&mcbsp2>;
+ ti,codec = <&twl_audio>;
+ };
};
&omap3_pmx_core {
reg = <0x48>;
interrupts = <7>; /* SYS_NIRQ cascaded to intc */
interrupt-parent = <&intc>;
+
+ twl_audio: audio {
+ compatible = "ti,twl4030-audio";
+ codec {
+ };
+ };
};
};
#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"
+#include <dt-bindings/input/input.h>
+
+&venc {
+ vdda-supply = <&vdac>;
+};
&mmc1 {
vmmc-supply = <&vmmc1>;
ti,pullups = <0x000001>;
};
+&twl_keypad {
+ linux,keymap = <
+ MATRIX_KEY(0x00, 0x01, KEY_A)
+ MATRIX_KEY(0x00, 0x02, KEY_B)
+ MATRIX_KEY(0x00, 0x03, KEY_LEFT)
+
+ MATRIX_KEY(0x01, 0x01, KEY_UP)
+ MATRIX_KEY(0x01, 0x02, KEY_ENTER)
+ MATRIX_KEY(0x01, 0x03, KEY_DOWN)
+
+ MATRIX_KEY(0x02, 0x01, KEY_RIGHT)
+ MATRIX_KEY(0x02, 0x02, KEY_C)
+ MATRIX_KEY(0x02, 0x03, KEY_D)
+ >;
+};
+
&hsusb1_phy {
reset-gpios = <&twl_gpio 6 GPIO_ACTIVE_LOW>;
};
};
&gpmc {
- ranges = <0 0 0x30000000 0x04>; /* CS0: NAND */
+ ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
- reg = <0 0 0>; /* CS0, offset 0 */
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
gpmc,sync-clk-ps = <0>;
};
&gpmc {
- ranges = <0 0 0x00000000 0x20000000>,
+ ranges = <0 0 0x00000000 0x1000000>, /* CS0: 16MB for NAND */
<5 0 0x2c000000 0x01000000>;
nand@0,0 {
linux,mtd-name= "hynix,h8kds0un0mer-4em";
- reg = <0 0 0>;
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
+ gpmc,device-width = <2>;
ti,nand-ecc-opt = "bch8";
gpmc,sync-clk-ps = <0>;
* Common support for omap3 EVM boards
*/
+#include <dt-bindings/input/input.h>
#include "omap-gpmc-smsc911x.dtsi"
/ {
ti,use-leds;
};
+&twl_keypad {
+ linux,keymap = <
+ MATRIX_KEY(2, 2, KEY_1)
+ MATRIX_KEY(1, 1, KEY_2)
+ MATRIX_KEY(0, 0, KEY_3)
+ MATRIX_KEY(3, 2, KEY_4)
+ MATRIX_KEY(2, 1, KEY_5)
+ MATRIX_KEY(1, 0, KEY_6)
+ MATRIX_KEY(1, 3, KEY_7)
+ MATRIX_KEY(3, 1, KEY_8)
+ MATRIX_KEY(2, 0, KEY_9)
+ MATRIX_KEY(2, 3, KEY_KPASTERISK)
+ MATRIX_KEY(0, 2, KEY_0)
+ MATRIX_KEY(3, 0, KEY_KPDOT)
+ /* s4 not wired */
+ MATRIX_KEY(1, 2, KEY_BACKSPACE)
+ MATRIX_KEY(0, 1, KEY_ENTER)
+ >;
+};
+
&usb_otg_hs {
interface-type = <0>;
usb-phy = <&usb2_phy>;
uart1_pins: pinmux_uart1_pins {
pinctrl-single,pins = <
- 0x152 (PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
- 0x14c (PIN_OUTPUT |MUX_MODE0) /* uart1_tx.uart1_tx */
+ OMAP3_CORE1_IOPAD(0x2182, PIN_INPUT | MUX_MODE0) /* uart1_rx.uart1_rx */
+ OMAP3_CORE1_IOPAD(0x217c, PIN_OUTPUT | MUX_MODE0) /* uart1_tx.uart1_tx */
>;
};
uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
- 0x14a (PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
- 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
+ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
+ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
>;
};
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
- 0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */
- 0x170 (PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */
+ OMAP3_CORE1_IOPAD(0x219e, PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */
+ OMAP3_CORE1_IOPAD(0x21a0, PIN_OUTPUT | MUX_MODE0) /* uart3_tx.uart3_tx */
>;
};
mmc1_pins: pinmux_mmc1_pins {
pinctrl-single,pins = <
- 0x114 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
- 0x116 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
- 0x118 (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
- 0x11a (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
- 0x11c (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
- 0x11e (PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
+ OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_clk.sdmmc1_clk */
+ OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_cmd.sdmmc1_cmd */
+ OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat0.sdmmc1_dat0 */
+ OMAP3_CORE1_IOPAD(0x214a, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat1.sdmmc1_dat1 */
+ OMAP3_CORE1_IOPAD(0x214c, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat2.sdmmc1_dat2 */
+ OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0) /* sdmmc1_dat3.sdmmc1_dat3 */
>;
};
dss_dpi_pins: pinmux_dss_dpi_pins {
pinctrl-single,pins = <
- 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
- 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
- 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
- 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
- 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
- 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
- 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
- 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
- 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
- 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
- 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
- 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
- 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
- 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
- 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
- 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
- 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
- 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
- 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
- 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
- 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
- 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
- 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
- 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
- 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
- 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
- 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
- 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
- >;
+ OMAP3_CORE1_IOPAD(0x20d4, PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ OMAP3_CORE1_IOPAD(0x20d6, PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ OMAP3_CORE1_IOPAD(0x20d8, PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ OMAP3_CORE1_IOPAD(0x20da, PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ OMAP3_CORE1_IOPAD(0x20dc, PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ OMAP3_CORE1_IOPAD(0x20de, PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ OMAP3_CORE1_IOPAD(0x20e0, PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ OMAP3_CORE1_IOPAD(0x20e2, PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ OMAP3_CORE1_IOPAD(0x20e4, PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ OMAP3_CORE1_IOPAD(0x20e6, PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ OMAP3_CORE1_IOPAD(0x20e8, PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ OMAP3_CORE1_IOPAD(0x20ea, PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ OMAP3_CORE1_IOPAD(0x20ec, PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ OMAP3_CORE1_IOPAD(0x20ee, PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ OMAP3_CORE1_IOPAD(0x20f0, PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ OMAP3_CORE1_IOPAD(0x20f2, PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ OMAP3_CORE1_IOPAD(0x20f4, PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ OMAP3_CORE1_IOPAD(0x20f6, PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ OMAP3_CORE1_IOPAD(0x20f8, PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ OMAP3_CORE1_IOPAD(0x20fc, PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ OMAP3_CORE1_IOPAD(0x20fe, PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ OMAP3_CORE1_IOPAD(0x2100, PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ OMAP3_CORE1_IOPAD(0x2102, PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ OMAP3_CORE1_IOPAD(0x2104, PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ OMAP3_CORE1_IOPAD(0x2106, PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ OMAP3_CORE1_IOPAD(0x2108, PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ OMAP3_CORE1_IOPAD(0x210a, PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ >;
};
};
};
&gpmc {
- ranges = <0 0 0x30000000 0x04>; /* CS0: NAND */
+ ranges = <0 0 0x30000000 0x1000000>; /* CS0: 16MB for NAND */
nand@0,0 {
- reg = <0 0 0>; /* CS0, offset 0 */
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
regulator-always-on;
};
- lbee1usjyc_vmmc: lbee1usjyc_vmmc {
- pinctrl-names = "default";
- pinctrl-0 = <&lbee1usjyc_pins>;
- compatible = "regulator-fixed";
- regulator-name = "regulator-lbee1usjyc";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 WIFI_PDN */
- startup-delay-us = <10000>;
- enable-active-high;
- vin-supply = <&vdd33>;
- };
};
&omap3_pmx_core {
>;
};
- uart2_pins: pinmux_uart2_pins {
- pinctrl-single,pins = <
- 0x14a (PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
- 0x148 (PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
- >;
- };
-
uart3_pins: pinmux_uart3_pins {
pinctrl-single,pins = <
0x16e (PIN_INPUT | MUX_MODE0) /* uart3_rx.uart3_rx */
>;
};
- /* WiFi/BT combo */
- lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
- pinctrl-single,pins = <
- 0x136 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 */
- 0x138 (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 */
- 0x13a (PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 */
- >;
- };
-
mcbsp2_pins: pinmux_mcbsp2_pins {
pinctrl-single,pins = <
0x10c (PIN_INPUT | MUX_MODE0) /* mcbsp2_fsx.mcbsp2_fsx */
>;
};
- i2c2_pins: pinmux_i2c2_pins {
- pinctrl-single,pins = <
- 0x18e (PIN_INPUT | MUX_MODE0) /* i2c2_scl.i2c2_scl */
- 0x190 (PIN_INPUT | MUX_MODE0) /* i2c2_sda.i2c2_sda */
- >;
- };
-
i2c3_pins: pinmux_i2c3_pins {
pinctrl-single,pins = <
0x192 (PIN_INPUT | MUX_MODE0) /* i2c3_scl.i2c3_scl */
};
};
+&gpmc {
+ nand@0,0 {
+ linux,mtd-name= "micron,mt29c4g96maz";
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
+ nand-bus-width = <16>;
+ gpmc,device-width = <2>;
+ ti,nand-ecc-opt = "bch8";
+
+ gpmc,sync-clk-ps = <0>;
+ gpmc,cs-on-ns = <0>;
+ gpmc,cs-rd-off-ns = <44>;
+ gpmc,cs-wr-off-ns = <44>;
+ gpmc,adv-on-ns = <6>;
+ gpmc,adv-rd-off-ns = <34>;
+ gpmc,adv-wr-off-ns = <44>;
+ gpmc,we-off-ns = <40>;
+ gpmc,oe-off-ns = <54>;
+ gpmc,access-ns = <64>;
+ gpmc,rd-cycle-ns = <82>;
+ gpmc,wr-cycle-ns = <82>;
+ gpmc,wr-access-ns = <40>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "SPL";
+ reg = <0 0x100000>;
+ };
+ partition@80000 {
+ label = "U-Boot";
+ reg = <0x100000 0x180000>;
+ };
+ partition@1c0000 {
+ label = "Environment";
+ reg = <0x280000 0x100000>;
+ };
+ partition@280000 {
+ label = "Kernel";
+ reg = <0x380000 0x300000>;
+ };
+ partition@780000 {
+ label = "Filesystem";
+ reg = <0x680000 0x1f980000>;
+ };
+ };
+};
+
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&i2c1_pins>;
#include "twl4030.dtsi"
#include "twl4030_omap3.dtsi"
-&i2c2 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_pins>;
- clock-frequency = <400000>;
-};
-
&i2c3 {
pinctrl-names = "default";
pinctrl-0 = <&i2c3_pins>;
bus-width = <4>;
};
-&mmc2 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc2_pins>;
- vmmc-supply = <&lbee1usjyc_vmmc>;
- bus-width = <4>;
- non-removable;
-};
-
&mmc3 {
status = "disabled";
};
pinctrl-0 = <&uart1_pins>;
};
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart2_pins>;
-};
-
&uart3 {
pinctrl-names = "default";
pinctrl-0 = <&uart3_pins>;
--- /dev/null
+/*
+ * Common Device Tree Source for IGEPv2
+ *
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-igep.dtsi"
+#include "omap-gpmc-smsc9221.dtsi"
+
+/ {
+
+ leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_pins>;
+ compatible = "gpio-leds";
+
+ boot {
+ label = "omap3:green:boot";
+ gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+
+ user0 {
+ label = "omap3:red:user0";
+ gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ user1 {
+ label = "omap3:red:user1";
+ gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ default-state = "off";
+ };
+
+ user2 {
+ label = "omap3:green:user1";
+ gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ /* HS USB Port 1 Power */
+ hsusb1_power: hsusb1_power_reg {
+ compatible = "regulator-fixed";
+ regulator-name = "hsusb1_vbus";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* GPIO LEDA */
+ startup-delay-us = <70000>;
+ };
+
+ /* HS USB Host PHY on PORT 1 */
+ hsusb1_phy: hsusb1_phy {
+ compatible = "usb-nop-xceiv";
+ reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
+ vcc-supply = <&hsusb1_power>;
+ };
+
+ tfp410: encoder@0 {
+ compatible = "ti,tfp410";
+ powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tfp410_in: endpoint@0 {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tfp410_out: endpoint@0 {
+ remote-endpoint = <&dvi_connector_in>;
+ };
+ };
+ };
+ };
+
+ dvi0: connector@0 {
+ compatible = "dvi-connector";
+ label = "dvi";
+
+ digital;
+
+ ddc-i2c-bus = <&i2c3>;
+
+ port {
+ dvi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+ };
+};
+
+&omap3_pmx_core {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &tfp410_pins
+ &dss_dpi_pins
+ >;
+
+ tfp410_pins: pinmux_tfp410_pins {
+ pinctrl-single,pins = <
+ 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
+ >;
+ };
+
+ dss_dpi_pins: pinmux_dss_dpi_pins {
+ pinctrl-single,pins = <
+ 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
+ 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
+ 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
+ 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
+ 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
+ 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
+ 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
+ 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
+ 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
+ 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
+ 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
+ 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
+ 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
+ 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
+ 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
+ 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
+ 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
+ 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
+ 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
+ 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
+ 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
+ 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
+ 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
+ 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
+ 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
+ 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
+ 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
+ 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ >;
+ };
+
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */
+ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/
+ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
+ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
+ >;
+ };
+};
+
+&omap3_pmx_core2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <
+ &hsusbb1_pins
+ >;
+
+ hsusbb1_pins: pinmux_hsusbb1_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
+ OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
+ OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d8.hsusb1_dir */
+ OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d9.hsusb1_nxt */
+ OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d0.hsusb1_data0 */
+ OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d1.hsusb1_data1 */
+ OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d2.hsusb1_data2 */
+ OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d3.hsusb1_data7 */
+ OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d4.hsusb1_data4 */
+ OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d5.hsusb1_data5 */
+ OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d6.hsusb1_data6 */
+ OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */
+ >;
+ };
+
+ leds_pins: pinmux_leds_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
+ OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
+ OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
+ >;
+ };
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+
+ /*
+ * Display monitor features are burnt in the EEPROM
+ * as EDID data.
+ */
+ eeprom@50 {
+ compatible = "ti,eeprom";
+ reg = <0x50>;
+ };
+};
+
+&gpmc {
+ ranges = <0 0 0x00000000 0x20000000>,
+ <5 0 0x2c000000 0x01000000>;
+
+ ethernet@gpmc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&smsc9221_pins>;
+ reg = <5 0 0xff>;
+ interrupt-parent = <&gpio6>;
+ interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
+
+&usbhshost {
+ port1-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <&hsusb1_phy>;
+};
+
+&vpll2 {
+ /* Needed for DSS */
+ regulator-name = "vdds_dsi";
+};
+
+&dss {
+ status = "ok";
+
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Device Tree Source for IGEPv2 Rev. F (TI OMAP AM/DM37x)
+ *
+ * Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-igep0020-common.dtsi"
+
+/ {
+ model = "IGEPv2 Rev. F (TI OMAP AM/DM37x)";
+ compatible = "isee,omap3-igep0020-rev-f", "ti,omap36xx", "ti,omap3";
+
+ /* Regulator to trigger the WL_EN signal of the Wifi module */
+ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-lbep5clwmc-wlen";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - WL_EN */
+ enable-active-high;
+ };
+};
+
+&omap3_pmx_core {
+ lbep5clwmc_pins: pinmux_lbep5clwmc_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21d4, PIN_INPUT | MUX_MODE4) /* mcspi1_cs3.gpio_177 - W_IRQ */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - BT_EN */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - WL_EN */
+ >;
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins &lbep5clwmc_pins>;
+ vmmc-supply = <&lbep5clwmc_wlen>;
+ bus-width = <4>;
+ non-removable;
+};
/*
- * Device Tree Source for IGEPv2 Rev. (TI OMAP AM/DM37x)
+ * Device Tree Source for IGEPv2 Rev. C (TI OMAP AM/DM37x)
*
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
* published by the Free Software Foundation.
*/
-#include "omap3-igep.dtsi"
-#include "omap-gpmc-smsc9221.dtsi"
+#include "omap3-igep0020-common.dtsi"
/ {
- model = "IGEPv2 (TI OMAP AM/DM37x)";
+ model = "IGEPv2 Rev. C (TI OMAP AM/DM37x)";
compatible = "isee,omap3-igep0020", "ti,omap36xx", "ti,omap3";
- leds {
- pinctrl-names = "default";
- pinctrl-0 = <&leds_pins>;
- compatible = "gpio-leds";
-
- boot {
- label = "omap3:green:boot";
- gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
-
- user0 {
- label = "omap3:red:user0";
- gpios = <&gpio1 27 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- user1 {
- label = "omap3:red:user1";
- gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
- default-state = "off";
- };
-
- user2 {
- label = "omap3:green:user1";
- gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>;
- };
+ /* Regulator to trigger the WIFI_PDN signal of the Wifi module */
+ lbee1usjyc_pdn: lbee1usjyc_pdn {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-lbee1usjyc-pdn";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 - WIFI_PDN */
+ startup-delay-us = <10000>;
+ enable-active-high;
};
- /* HS USB Port 1 Power */
- hsusb1_power: hsusb1_power_reg {
- compatible = "regulator-fixed";
- regulator-name = "hsusb1_vbus";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* GPIO LEDA */
- startup-delay-us = <70000>;
- };
-
- /* HS USB Host PHY on PORT 1 */
- hsusb1_phy: hsusb1_phy {
- compatible = "usb-nop-xceiv";
- reset-gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; /* gpio_24 */
- vcc-supply = <&hsusb1_power>;
- };
-
- tfp410: encoder@0 {
- compatible = "ti,tfp410";
- powerdown-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>; /* gpio_170 */
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- port@0 {
- reg = <0>;
-
- tfp410_in: endpoint@0 {
- remote-endpoint = <&dpi_out>;
- };
- };
-
- port@1 {
- reg = <1>;
-
- tfp410_out: endpoint@0 {
- remote-endpoint = <&dvi_connector_in>;
- };
- };
- };
- };
-
- dvi0: connector@0 {
- compatible = "dvi-connector";
- label = "dvi";
-
- digital;
-
- ddc-i2c-bus = <&i2c3>;
-
- port {
- dvi_connector_in: endpoint {
- remote-endpoint = <&tfp410_out>;
- };
- };
+ /* Regulator to trigger the RESET_N_W signal of the Wifi module */
+ lbee1usjyc_reset_n_w: lbee1usjyc_reset_n_w {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-lbee1usjyc-reset-n-w";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - RESET_N_W */
+ enable-active-high;
};
};
&omap3_pmx_core {
- pinctrl-names = "default";
- pinctrl-0 = <
- &tfp410_pins
- &dss_dpi_pins
- >;
-
- tfp410_pins: pinmux_tfp410_pins {
+ lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
pinctrl-single,pins = <
- 0x196 (PIN_OUTPUT | MUX_MODE4) /* hdq_sio.gpio_170 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - RESET_N_W */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 - WIFI_PDN */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - RST_N_B */
>;
};
- dss_dpi_pins: pinmux_dss_dpi_pins {
+ uart2_pins: pinmux_uart2_pins {
pinctrl-single,pins = <
- 0x0a4 (PIN_OUTPUT | MUX_MODE0) /* dss_pclk.dss_pclk */
- 0x0a6 (PIN_OUTPUT | MUX_MODE0) /* dss_hsync.dss_hsync */
- 0x0a8 (PIN_OUTPUT | MUX_MODE0) /* dss_vsync.dss_vsync */
- 0x0aa (PIN_OUTPUT | MUX_MODE0) /* dss_acbias.dss_acbias */
- 0x0ac (PIN_OUTPUT | MUX_MODE0) /* dss_data0.dss_data0 */
- 0x0ae (PIN_OUTPUT | MUX_MODE0) /* dss_data1.dss_data1 */
- 0x0b0 (PIN_OUTPUT | MUX_MODE0) /* dss_data2.dss_data2 */
- 0x0b2 (PIN_OUTPUT | MUX_MODE0) /* dss_data3.dss_data3 */
- 0x0b4 (PIN_OUTPUT | MUX_MODE0) /* dss_data4.dss_data4 */
- 0x0b6 (PIN_OUTPUT | MUX_MODE0) /* dss_data5.dss_data5 */
- 0x0b8 (PIN_OUTPUT | MUX_MODE0) /* dss_data6.dss_data6 */
- 0x0ba (PIN_OUTPUT | MUX_MODE0) /* dss_data7.dss_data7 */
- 0x0bc (PIN_OUTPUT | MUX_MODE0) /* dss_data8.dss_data8 */
- 0x0be (PIN_OUTPUT | MUX_MODE0) /* dss_data9.dss_data9 */
- 0x0c0 (PIN_OUTPUT | MUX_MODE0) /* dss_data10.dss_data10 */
- 0x0c2 (PIN_OUTPUT | MUX_MODE0) /* dss_data11.dss_data11 */
- 0x0c4 (PIN_OUTPUT | MUX_MODE0) /* dss_data12.dss_data12 */
- 0x0c6 (PIN_OUTPUT | MUX_MODE0) /* dss_data13.dss_data13 */
- 0x0c8 (PIN_OUTPUT | MUX_MODE0) /* dss_data14.dss_data14 */
- 0x0ca (PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
- 0x0cc (PIN_OUTPUT | MUX_MODE0) /* dss_data16.dss_data16 */
- 0x0ce (PIN_OUTPUT | MUX_MODE0) /* dss_data17.dss_data17 */
- 0x0d0 (PIN_OUTPUT | MUX_MODE0) /* dss_data18.dss_data18 */
- 0x0d2 (PIN_OUTPUT | MUX_MODE0) /* dss_data19.dss_data19 */
- 0x0d4 (PIN_OUTPUT | MUX_MODE0) /* dss_data20.dss_data20 */
- 0x0d6 (PIN_OUTPUT | MUX_MODE0) /* dss_data21.dss_data21 */
- 0x0d8 (PIN_OUTPUT | MUX_MODE0) /* dss_data22.dss_data22 */
- 0x0da (PIN_OUTPUT | MUX_MODE0) /* dss_data23.dss_data23 */
+ OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT | MUX_MODE0) /* uart2_cts.uart2_cts */
+ OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT | MUX_MODE0) /* uart2_rts .uart2_rts*/
+ OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx.uart2_tx */
+ OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx.uart2_rx */
>;
};
};
-&omap3_pmx_core2 {
+/* On board Wifi module */
+&mmc2 {
pinctrl-names = "default";
- pinctrl-0 = <
- &hsusbb1_pins
- >;
-
- hsusbb1_pins: pinmux_hsusbb1_pins {
- pinctrl-single,pins = <
- OMAP3630_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
- OMAP3630_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
- OMAP3630_CORE2_IOPAD(0x25ec, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d8.hsusb1_dir */
- OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d9.hsusb1_nxt */
- OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d0.hsusb1_data0 */
- OMAP3630_CORE2_IOPAD(0x25de, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d1.hsusb1_data1 */
- OMAP3630_CORE2_IOPAD(0x25e0, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d2.hsusb1_data2 */
- OMAP3630_CORE2_IOPAD(0x25e2, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d3.hsusb1_data7 */
- OMAP3630_CORE2_IOPAD(0x25e4, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d4.hsusb1_data4 */
- OMAP3630_CORE2_IOPAD(0x25e6, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d5.hsusb1_data5 */
- OMAP3630_CORE2_IOPAD(0x25e8, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d6.hsusb1_data6 */
- OMAP3630_CORE2_IOPAD(0x25ea, PIN_INPUT_PULLDOWN | MUX_MODE3) /* etk_d7.hsusb1_data3 */
- >;
- };
-
- leds_pins: pinmux_leds_pins {
- pinctrl-single,pins = <
- OMAP3630_CORE2_IOPAD(0x25f4, PIN_OUTPUT | MUX_MODE4) /* etk_d12.gpio_26 */
- OMAP3630_CORE2_IOPAD(0x25f6, PIN_OUTPUT | MUX_MODE4) /* etk_d13.gpio_27 */
- OMAP3630_CORE2_IOPAD(0x25f8, PIN_OUTPUT | MUX_MODE4) /* etk_d14.gpio_28 */
- >;
- };
-};
-
-&i2c3 {
- clock-frequency = <100000>;
-
- /*
- * Display monitor features are burnt in the EEPROM
- * as EDID data.
- */
- eeprom@50 {
- compatible = "ti,eeprom";
- reg = <0x50>;
- };
-};
-
-&gpmc {
- ranges = <0 0 0x00000000 0x20000000>,
- <5 0 0x2c000000 0x01000000>;
-
- nand@0,0 {
- linux,mtd-name= "micron,mt29c4g96maz";
- reg = <0 0 0>;
- nand-bus-width = <16>;
- ti,nand-ecc-opt = "bch8";
-
- gpmc,sync-clk-ps = <0>;
- gpmc,cs-on-ns = <0>;
- gpmc,cs-rd-off-ns = <44>;
- gpmc,cs-wr-off-ns = <44>;
- gpmc,adv-on-ns = <6>;
- gpmc,adv-rd-off-ns = <34>;
- gpmc,adv-wr-off-ns = <44>;
- gpmc,we-off-ns = <40>;
- gpmc,oe-off-ns = <54>;
- gpmc,access-ns = <64>;
- gpmc,rd-cycle-ns = <82>;
- gpmc,wr-cycle-ns = <82>;
- gpmc,wr-access-ns = <40>;
- gpmc,wr-data-mux-bus-ns = <0>;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SPL";
- reg = <0 0x100000>;
- };
- partition@80000 {
- label = "U-Boot";
- reg = <0x100000 0x180000>;
- };
- partition@1c0000 {
- label = "Environment";
- reg = <0x280000 0x100000>;
- };
- partition@280000 {
- label = "Kernel";
- reg = <0x380000 0x300000>;
- };
- partition@780000 {
- label = "Filesystem";
- reg = <0x680000 0x1f980000>;
- };
- };
-
- ethernet@gpmc {
- pinctrl-names = "default";
- pinctrl-0 = <&smsc9221_pins>;
- reg = <5 0 0xff>;
- interrupt-parent = <&gpio6>;
- interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-&usbhshost {
- port1-mode = "ehci-phy";
-};
-
-&usbhsehci {
- phys = <&hsusb1_phy>;
-};
-
-&vpll2 {
- /* Needed for DSS */
- regulator-name = "vdds_dsi";
-};
-
-&dss {
- status = "ok";
-
- port {
- dpi_out: endpoint {
- remote-endpoint = <&tfp410_in>;
- data-lines = <24>;
- };
- };
+ pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
+ vmmc-supply = <&lbee1usjyc_pdn>;
+ vmmc_aux-supply = <&lbee1usjyc_reset_n_w>;
+ bus-width = <4>;
+ non-removable;
};
--- /dev/null
+/*
+ * Common Device Tree Source for IGEP COM MODULE
+ *
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-igep.dtsi"
+
+/ {
+ leds: gpio_leds {
+ compatible = "gpio-leds";
+
+ user0 {
+ label = "omap3:red:user0";
+ gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */
+ default-state = "off";
+ };
+
+ user1 {
+ label = "omap3:green:user1";
+ gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>; /* LEDB */
+ default-state = "off";
+ };
+
+ user2 {
+ label = "omap3:red:user1";
+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; /* gpio_16 */
+ default-state = "off";
+ };
+ };
+};
+
+&omap3_pmx_core {
+ uart2_pins: pinmux_uart2_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x216c, PIN_INPUT | MUX_MODE1) /* mcbsp3_dx.uart2_cts */
+ OMAP3_CORE1_IOPAD(0x216e, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_dr.uart2_rts */
+ OMAP3_CORE1_IOPAD(0x2170, PIN_OUTPUT | MUX_MODE1) /* mcbsp3_clk.uart2_tx */
+ OMAP3_CORE1_IOPAD(0x2172, PIN_INPUT | MUX_MODE1) /* mcbsp3_fsx.uart2_rx */
+ >;
+ };
+};
+
+&omap3_pmx_core2 {
+ leds_core2_pins: pinmux_leds_core2_pins {
+ pinctrl-single,pins = <
+ OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */
+ >;
+ };
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart2_pins>;
+};
--- /dev/null
+/*
+ * Device Tree Source for IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)
+ *
+ * Copyright (C) 2014 Javier Martinez Canillas <javier@collabora.co.uk>
+ * Copyright (C) 2014 Enric Balletbo i Serra <eballetbo@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include "omap3-igep0030-common.dtsi"
+
+/ {
+ model = "IGEP COM MODULE Rev. G (TI OMAP AM/DM37x)";
+ compatible = "isee,omap3-igep0030-rev-g", "ti,omap36xx", "ti,omap3";
+
+ /* Regulator to trigger the WL_EN signal of the Wifi module */
+ lbep5clwmc_wlen: regulator-lbep5clwmc-wlen {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-lbep5clwmc-wlen";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - WL_EN */
+ enable-active-high;
+ };
+};
+
+&omap3_pmx_core {
+ lbep5clwmc_pins: pinmux_lbep5clwmc_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x2164, PIN_INPUT | MUX_MODE4) /* sdmmc2_dat4.gpio_136 - W_IRQ */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - BT_EN */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - WL_EN */
+ >;
+ };
+
+ leds_pins: pinmux_leds_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21be, PIN_OUTPUT | MUX_MODE4) /* i2c2_scl.gpio_168 */
+ >;
+ };
+
+};
+
+&i2c2 {
+ status = "disabled";
+};
+
+&leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_pins &leds_core2_pins>;
+
+ boot {
+ label = "omap3:green:boot";
+ gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+};
+
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins &lbep5clwmc_pins>;
+ vmmc-supply = <&lbep5clwmc_wlen>;
+ bus-width = <4>;
+ non-removable;
+};
/*
- * Device Tree Source for IGEP COM MODULE (TI OMAP AM/DM37x)
+ * Device Tree Source for IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)
*
* Copyright (C) 2012 Javier Martinez Canillas <javier@collabora.co.uk>
* Copyright (C) 2012 Enric Balletbo i Serra <eballetbo@gmail.com>
* published by the Free Software Foundation.
*/
-#include "omap3-igep.dtsi"
+#include "omap3-igep0030-common.dtsi"
/ {
- model = "IGEP COM MODULE (TI OMAP AM/DM37x)";
+ model = "IGEP COM MODULE Rev. E (TI OMAP AM/DM37x)";
compatible = "isee,omap3-igep0030", "ti,omap36xx", "ti,omap3";
- leds {
- pinctrl-names = "default";
- pinctrl-0 = <&leds_pins>;
- compatible = "gpio-leds";
-
- boot {
- label = "omap3:green:boot";
- gpios = <&twl_gpio 13 GPIO_ACTIVE_LOW>;
- default-state = "on";
- };
-
- user0 {
- label = "omap3:red:user0";
- gpios = <&twl_gpio 18 GPIO_ACTIVE_LOW>; /* LEDA */
- default-state = "off";
- };
-
- user1 {
- label = "omap3:green:user1";
- gpios = <&twl_gpio 19 GPIO_ACTIVE_LOW>; /* LEDB */
- default-state = "off";
- };
+ /* Regulator to trigger the WIFI_PDN signal of the Wifi module */
+ lbee1usjyc_pdn: lbee1usjyc_pdn {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-lbee1usjyc-pdn";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 10 GPIO_ACTIVE_HIGH>; /* gpio_138 - WIFI_PDN */
+ startup-delay-us = <10000>;
+ enable-active-high;
+ };
- user2 {
- label = "omap3:red:user1";
- gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
- default-state = "off";
- };
+ /* Regulator to trigger the RESET_N_W signal of the Wifi module */
+ lbee1usjyc_reset_n_w: lbee1usjyc_reset_n_w {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-lbee1usjyc-reset-n-w";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio5 11 GPIO_ACTIVE_HIGH>; /* gpio_139 - RESET_N_W */
+ enable-active-high;
};
};
-&omap3_pmx_core2 {
- leds_pins: pinmux_leds_pins {
+&omap3_pmx_core {
+ lbee1usjyc_pins: pinmux_lbee1usjyc_pins {
pinctrl-single,pins = <
- OMAP3630_CORE2_IOPAD(0x25e0, PIN_OUTPUT | MUX_MODE4) /* etk_d2.gpio_16 */
+ OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat5.gpio_137 - RESET_N_W */
+ OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat6.gpio_138 - WIFI_PDN */
+ OMAP3_CORE1_IOPAD(0x216a, PIN_OUTPUT | MUX_MODE4) /* sdmmc2_dat7.gpio_139 - RST_N_B */
>;
};
};
-&gpmc {
- ranges = <0 0 0x00000000 0x20000000>;
-
- nand@0,0 {
- linux,mtd-name= "micron,mt29c4g96maz";
- reg = <0 0 0>;
- nand-bus-width = <16>;
- ti,nand-ecc-opt = "bch8";
+&leds {
+ pinctrl-names = "default";
+ pinctrl-0 = <&leds_core2_pins>;
- gpmc,sync-clk-ps = <0>;
- gpmc,cs-on-ns = <0>;
- gpmc,cs-rd-off-ns = <44>;
- gpmc,cs-wr-off-ns = <44>;
- gpmc,adv-on-ns = <6>;
- gpmc,adv-rd-off-ns = <34>;
- gpmc,adv-wr-off-ns = <44>;
- gpmc,we-off-ns = <40>;
- gpmc,oe-off-ns = <54>;
- gpmc,access-ns = <64>;
- gpmc,rd-cycle-ns = <82>;
- gpmc,wr-cycle-ns = <82>;
- gpmc,wr-access-ns = <40>;
- gpmc,wr-data-mux-bus-ns = <0>;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- partition@0 {
- label = "SPL";
- reg = <0 0x100000>;
- };
- partition@80000 {
- label = "U-Boot";
- reg = <0x100000 0x180000>;
- };
- partition@1c0000 {
- label = "Environment";
- reg = <0x280000 0x100000>;
- };
- partition@280000 {
- label = "Kernel";
- reg = <0x380000 0x300000>;
- };
- partition@780000 {
- label = "Filesystem";
- reg = <0x680000 0x1f980000>;
- };
+ boot {
+ label = "omap3:green:boot";
+ gpios = <&twl_gpio 13 GPIO_ACTIVE_LOW>; /* LEDSYNC */
+ default-state = "on";
};
};
+
+/* On board Wifi module */
+&mmc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins &lbee1usjyc_pins>;
+ vmmc-supply = <&lbee1usjyc_pdn>;
+ vmmc_aux-supply = <&lbee1usjyc_reset_n_w>;
+ bus-width = <4>;
+ non-removable;
+};
+
*/
/dts-v1/;
+#include <dt-bindings/input/input.h>
#include "omap34xx.dtsi"
#include "omap-gpmc-smsc911x.dtsi"
nand@0,0 {
linux,mtd-name= "micron,nand";
- reg = <0 0 0>;
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
+ gpmc,device-width = <2>;
ti,nand-ecc-opt = "bch8";
gpmc,sync-clk-ps = <0>;
};
partition@2000000 {
label = "Filesystem";
- reg = <0x2000000 0xe000000>;
+ reg = <0x2000000 0x6000000>;
};
};
};
};
+&twl_keypad {
+ linux,keymap = <MATRIX_KEY(0, 0, KEY_1)
+ MATRIX_KEY(0, 1, KEY_2)
+ MATRIX_KEY(0, 2, KEY_3)
+ MATRIX_KEY(1, 0, KEY_4)
+ MATRIX_KEY(1, 1, KEY_5)
+ MATRIX_KEY(1, 2, KEY_6)
+ MATRIX_KEY(1, 3, KEY_F5)
+ MATRIX_KEY(2, 0, KEY_7)
+ MATRIX_KEY(2, 1, KEY_8)
+ MATRIX_KEY(2, 2, KEY_9)
+ MATRIX_KEY(2, 3, KEY_F6)
+ MATRIX_KEY(3, 0, KEY_F7)
+ MATRIX_KEY(3, 1, KEY_0)
+ MATRIX_KEY(3, 2, KEY_F8)
+ MATRIX_KEY(5, 4, KEY_RESERVED)
+ MATRIX_KEY(4, 4, KEY_VOLUMEUP)
+ MATRIX_KEY(5, 5, KEY_VOLUMEDOWN)>;
+};
+
&uart3 {
interrupts-extended = <&intc 74 &omap3_pmx_core OMAP3_UART3_RX>;
};
<7 0 0x15000000 0x01000000>;
nand@0,0 {
- reg = <0 0 0x1000000>;
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
ti,nand-ecc-opt = "bch8";
/* no elm on omap3 */
eci-switch-gpios = <&gpio6 22 GPIO_ACTIVE_HIGH>; /* 182 */
speaker-amplifier-gpios = <&twl_gpio 7 GPIO_ACTIVE_HIGH>;
};
+
+ battery: n900-battery {
+ compatible = "nokia,n900-battery";
+ io-channels = <&twl_madc 0>, <&twl_madc 4>, <&twl_madc 12>;
+ io-channel-names = "temp", "bsi", "vbat";
+ };
};
&omap3_pmx_core {
>;
};
+ gpmc_pins: pinmux_gpmc_pins {
+ pinctrl-single,pins = <
+
+ /* address lines */
+ OMAP3_CORE1_IOPAD(0x207a, PIN_OUTPUT | MUX_MODE0) /* gpmc_a1.gpmc_a1 */
+ OMAP3_CORE1_IOPAD(0x207c, PIN_OUTPUT | MUX_MODE0) /* gpmc_a2.gpmc_a2 */
+ OMAP3_CORE1_IOPAD(0x207e, PIN_OUTPUT | MUX_MODE0) /* gpmc_a3.gpmc_a3 */
+
+ /* data lines, gpmc_d0..d7 not muxable according to TRM */
+ OMAP3_CORE1_IOPAD(0x209e, PIN_INPUT | MUX_MODE0) /* gpmc_d8.gpmc_d8 */
+ OMAP3_CORE1_IOPAD(0x20a0, PIN_INPUT | MUX_MODE0) /* gpmc_d9.gpmc_d9 */
+ OMAP3_CORE1_IOPAD(0x20a2, PIN_INPUT | MUX_MODE0) /* gpmc_d10.gpmc_d10 */
+ OMAP3_CORE1_IOPAD(0x20a4, PIN_INPUT | MUX_MODE0) /* gpmc_d11.gpmc_d11 */
+ OMAP3_CORE1_IOPAD(0x20a6, PIN_INPUT | MUX_MODE0) /* gpmc_d12.gpmc_d12 */
+ OMAP3_CORE1_IOPAD(0x20a8, PIN_INPUT | MUX_MODE0) /* gpmc_d13.gpmc_d13 */
+ OMAP3_CORE1_IOPAD(0x20aa, PIN_INPUT | MUX_MODE0) /* gpmc_d14.gpmc_d14 */
+ OMAP3_CORE1_IOPAD(0x20ac, PIN_INPUT | MUX_MODE0) /* gpmc_d15.gpmc_d15 */
+
+ /*
+ * gpmc_ncs0, gpmc_nadv_ale, gpmc_noe, gpmc_nwe, gpmc_wait0 not muxable
+ * according to TRM. OneNAND seems to require PIN_INPUT on clock.
+ */
+ OMAP3_CORE1_IOPAD(0x20b0, PIN_OUTPUT | MUX_MODE0) /* gpmc_ncs1.gpmc_ncs1 */
+ OMAP3_CORE1_IOPAD(0x20be, PIN_INPUT | MUX_MODE0) /* gpmc_clk.gpmc_clk */
+ >;
+ };
+
i2c1_pins: pinmux_i2c1_pins {
pinctrl-single,pins = <
0x18a (PIN_INPUT | MUX_MODE0) /* i2c1_scl */
power-gpio = <&gpio4 2 GPIO_ACTIVE_HIGH>; /* 98 */
};
+ si4713: si4713@63 {
+ compatible = "silabs,si4713";
+ reg = <0x63>;
+
+ interrupts-extended = <&gpio2 21 IRQ_TYPE_EDGE_FALLING>; /* 53 */
+ reset-gpios = <&gpio6 3 GPIO_ACTIVE_HIGH>; /* 163 */
+ vio-supply = <&vio>;
+ vdd-supply = <&vaux1>;
+ };
+
bq24150a: bq24150a@6b {
compatible = "ti,bq24150a";
reg = <0x6b>;
};
&gpmc {
- ranges = <0 0 0x04000000 0x10000000>; /* 256MB */
ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */
<1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpmc_pins>;
- /* gpio-irq for dma: 65 */
-
+ /* sys_ndmareq1 could be used by the driver, not as gpio65 though */
onenand@0,0 {
#address-cells = <1>;
#size-cells = <1>;
- reg = <0 0 0x10000000>;
+ reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
gpmc,sync-read;
gpmc,sync-write;
bank-width = <2>;
pinctrl-names = "default";
pinctrl-0 = <ðernet_pins>;
+ power-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>; /* gpio86 */
+ reset-gpios = <&gpio6 4 GPIO_ACTIVE_HIGH>; /* gpio164 */
gpmc,device-width = <2>;
gpmc,sync-clk-ps = <0>;
gpmc,cs-on-ns = <0>;
};
&gpmc {
- ranges = <0 0 0x04000000 0x20000000>;
+ ranges = <0 0 0x04000000 0x1000000>; /* CS0: 16MB for OneNAND */
onenand@0,0 {
#address-cells = <1>;
#size-cells = <1>;
- reg = <0 0 0x20000000>;
+ reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
gpmc,sync-read;
gpmc,sync-write;
* Common support for CompuLab SB-T35 used on SBC-T3530, SBC-T3517 and SBC-T3730
*/
+/ {
+ tfp410: encoder@0 {
+ compatible = "ti,tfp410";
+
+ powerdown-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* gpio_54 */
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&tfp410_pins>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ tfp410_in: endpoint@0 {
+ remote-endpoint = <&dpi_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ tfp410_out: endpoint@0 {
+ remote-endpoint = <&dvi_connector_in>;
+ };
+ };
+ };
+ };
+
+ dvi0: connector@0 {
+ compatible = "dvi-connector";
+ label = "dvi";
+
+ port {
+ dvi_connector_in: endpoint {
+ remote-endpoint = <&tfp410_out>;
+ };
+ };
+ };
+
+ audio_amp: audio_amp {
+ compatible = "regulator-fixed";
+ regulator-name = "audio_amp";
+ pinctrl-names = "default";
+ pinctrl-0 = <&sb_t35_audio_amp>;
+ gpio = <&gpio2 29 GPIO_ACTIVE_LOW>; /* gpio_61 */
+ enable-active-low;
+ regulator-always-on;
+ };
+};
+
&omap3_pmx_core {
smsc2_pins: pinmux_smsc2_pins {
pinctrl-single,pins = <
OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_wait3.gpio_65 */
>;
};
+
+ tfp410_pins: pinmux_tfp410_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20b4, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs3.gpio_54 */
+ >;
+ };
+
+ i2c3_pins: pinmux_i2c3_pins {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x21c2, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_scl */
+ OMAP3_CORE1_IOPAD(0x21c4, PIN_INPUT_PULLUP | MUX_MODE0) /* i2c3_sda */
+ >;
+ };
+
+ sb_t35_audio_amp: pinmux_sb_t35_audio_amp {
+ pinctrl-single,pins = <
+ OMAP3_CORE1_IOPAD(0x20c8, PIN_OUTPUT | MUX_MODE4) /* gpmc_nbe1.gpio_61 */
+ >;
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins>;
+
+ clock-frequency = <400000>;
+
+ at24@50 {
+ compatible = "at24,24c02";
+ pagesize = <16>;
+ reg = <0x50>;
+ };
};
&gpmc {
interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
reg = <4 0 0xff>;
bank-width = <2>;
- gpmc,mux-add-data;
- gpmc,cs-on-ns = <1>;
- gpmc,cs-rd-off-ns = <180>;
- gpmc,cs-wr-off-ns = <180>;
- gpmc,adv-rd-off-ns = <18>;
- gpmc,adv-wr-off-ns = <48>;
- gpmc,oe-on-ns = <54>;
- gpmc,oe-off-ns = <168>;
- gpmc,we-on-ns = <54>;
- gpmc,we-off-ns = <168>;
- gpmc,rd-cycle-ns = <186>;
- gpmc,wr-cycle-ns = <186>;
- gpmc,access-ns = <144>;
- gpmc,page-burst-access-ns = <24>;
- gpmc,bus-turnaround-ns = <90>;
- gpmc,cycle2cycle-delay-ns = <90>;
- gpmc,cycle2cycle-samecsen;
- gpmc,cycle2cycle-diffcsen;
+ gpmc,device-width = <1>;
+ gpmc,cycle2cycle-samecsen = <1>;
+ gpmc,cycle2cycle-diffcsen = <1>;
+ gpmc,cs-on-ns = <5>;
+ gpmc,cs-rd-off-ns = <150>;
+ gpmc,cs-wr-off-ns = <150>;
+ gpmc,adv-on-ns = <0>;
+ gpmc,adv-rd-off-ns = <15>;
+ gpmc,adv-wr-off-ns = <40>;
+ gpmc,oe-on-ns = <45>;
+ gpmc,oe-off-ns = <140>;
+ gpmc,we-on-ns = <45>;
+ gpmc,we-off-ns = <140>;
+ gpmc,rd-cycle-ns = <155>;
+ gpmc,wr-cycle-ns = <155>;
+ gpmc,access-ns = <120>;
+ gpmc,page-burst-access-ns = <20>;
+ gpmc,bus-turnaround-ns = <75>;
+ gpmc,cycle2cycle-delay-ns = <75>;
+ gpmc,wait-monitoring-ns = <0>;
+ gpmc,clk-activation-ns = <0>;
+ gpmc,wr-data-mux-bus-ns = <0>;
+ gpmc,wr-access-ns = <0>;
vddvario-supply = <&vddvario>;
vdd33a-supply = <&vdd33a>;
reg-io-width = <4>;
model = "CompuLab SBC-T3517 with CM-T3517";
compatible = "compulab,omap3-sbc-t3517", "compulab,omap3-cm-t3517", "ti,am3517", "ti,omap3";
+ aliases {
+ display0 = &dvi0;
+ display1 = &tv0;
+ };
+
/* Only one GPMC smsc9220 on SBC-T3517, CM-T3517 uses am35x Ethernet */
vddvario: regulator-vddvario-sb-t35 {
compatible = "regulator-fixed";
wp-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59 */
cd-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
};
+
+&dss {
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
/ {
model = "CompuLab SBC-T3530 with CM-T3530";
compatible = "compulab,omap3-sbc-t3530", "compulab,omap3-cm-t3530", "ti,omap34xx", "ti,omap3";
+
+ aliases {
+ display0 = &dvi0;
+ display1 = &tv0;
+ };
};
&omap3_pmx_core {
&mmc1 {
cd-gpios = <&twl_gpio 0 GPIO_ACTIVE_HIGH>;
};
+
+&dss {
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
/ {
model = "CompuLab SBC-T3730 with CM-T3730";
compatible = "compulab,omap3-sbc-t3730", "compulab,omap3-cm-t3730", "ti,omap36xx", "ti,omap3";
+
+ aliases {
+ display0 = &dvi0;
+ display1 = &tv0;
+ };
};
&omap3_pmx_core {
ranges = <5 0 0x2c000000 0x01000000>,
<4 0 0x2d000000 0x01000000>;
};
+
+&dss {
+ port {
+ dpi_out: endpoint {
+ remote-endpoint = <&tfp410_in>;
+ data-lines = <24>;
+ };
+ };
+};
+
ranges = <0 0 0x00000000 0x01000000>;
nand@0,0 {
- reg = <0 0 0>; /* CS0, offset 0 */
+ reg = <0 0 4>; /* CS0, offset 0, IO size 4 */
nand-bus-width = <16>;
gpmc,device-width = <2>; /* GPMC_DEVWIDTH_16BIT */
ti,nand-ecc-opt = "sw";
* hierarchy.
*/
ocp {
- compatible = "simple-bus";
+ compatible = "ti,omap3-l3-smx", "simple-bus";
reg = <0x68000000 0x10000>;
interrupts = <9 10>;
#address-cells = <1>;
ti,hwmods = "mailbox";
reg = <0x48094000 0x200>;
interrupts = <26>;
+ #mbox-cells = <1>;
ti,mbox-num-users = <2>;
ti,mbox-num-fifos = <2>;
mbox_dsp: dsp {
&gpmc {
ranges = <0 0 0x10000000 0x08000000>,
- <1 0 0x28000000 0x08000000>,
- <2 0 0x20000000 0x10000000>;
+ <1 0 0x28000000 0x1000000>, /* CS1: 16MB for NAND */
+ <2 0 0x20000000 0x1000000>; /* CS2: 16MB for OneNAND */
nor@0,0 {
compatible = "cfi-flash";
linux,mtd-name= "micron,mt29f1g08abb";
#address-cells = <1>;
#size-cells = <1>;
- reg = <1 0 0x08000000>;
+ reg = <1 0 4>; /* CS1, offset 0, IO size 4 */
ti,nand-ecc-opt = "sw";
nand-bus-width = <8>;
gpmc,cs-on-ns = <0>;
linux,mtd-name= "samsung,kfm2g16q2m-deb8";
#address-cells = <1>;
#size-cells = <1>;
- reg = <2 0 0x10000000>;
+ reg = <2 0 0x20000>; /* CS2, offset 0, IO size 4 */
gpmc,device-width = <2>;
gpmc,mux-add-data = <2>;
&hdmi {
status = "ok";
+ vdda-supply = <&vdac>;
pinctrl-names = "default";
pinctrl-0 = <&dss_hdmi_pins>;
reg = <0x4a0f4000 0x200>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox";
+ #mbox-cells = <1>;
ti,mbox-num-users = <3>;
ti,mbox-num-fifos = <8>;
mbox_ipu: mbox_ipu {
reg = <0x58002000 0x1000>;
status = "disabled";
ti,hwmods = "dss_rfbi";
- clocks = <&dss_dss_clk>, <&dss_fck>;
+ clocks = <&dss_dss_clk>, <&l3_div_ck>;
clock-names = "fck", "ick";
};
reg = <0x1120>;
};
- dss_fck: dss_fck {
- #clock-cells = <0>;
- compatible = "ti,gate-clock";
- clocks = <&l3_div_ck>;
- ti,bit-shift = <1>;
- reg = <0x1120>;
- };
-
fdif_fck: fdif_fck {
#clock-cells = <0>;
compatible = "ti,divider-clock";
reg = <0x4a0f4000 0x200>;
interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
ti,hwmods = "mailbox";
+ #mbox-cells = <1>;
ti,mbox-num-users = <3>;
ti,mbox-num-fifos = <8>;
mbox_ipu: mbox_ipu {
};
};
+ arm-pmu {
+ compatible = "arm,cortex-a9-pmu";
+ interrupts = <29>;
+ };
+
axi {
compatible = "simple-bus";
#address-cells = <1>;
reg = <0x90020000 0x10000>;
interrupts = <31>;
clocks = <&clks 35>;
+ resets = <&rstc 6>;
};
};
compatible = "sirf,prima2-dspif";
reg = <0xa8000000 0x10000>;
interrupts = <9>;
+ resets = <&rstc 1>;
};
gps@a8010000 {
reg = <0xa8010000 0x10000>;
interrupts = <7>;
clocks = <&clks 9>;
+ resets = <&rstc 2>;
};
dsp@a9000000 {
reg = <0xa9000000 0x1000000>;
interrupts = <8>;
clocks = <&clks 8>;
+ resets = <&rstc 0>;
};
};
sirf,function = "sdmmc5";
};
};
+ i2s_mclk_pins_a: i2s_mclk@0 {
+ i2s_mclk {
+ sirf,pins = "i2smclkgrp";
+ sirf,function = "i2s_mclk";
+ };
+ };
+ i2s_ext_clk_input_pins_a: i2s_ext_clk_input@0 {
+ i2s_ext_clk_input {
+ sirf,pins = "i2s_ext_clk_inputgrp";
+ sirf,function = "i2s_ext_clk_input";
+ };
+ };
i2s_pins_a: i2s@0 {
i2s {
sirf,pins = "i2sgrp";
sirf,function = "i2s";
};
};
+ i2s_no_din_pins_a: i2s_no_din@0 {
+ i2s_no_din {
+ sirf,pins = "i2s_no_dingrp";
+ sirf,function = "i2s_no_din";
+ };
+ };
+ i2s_6chn_pins_a: i2s_6chn@0 {
+ i2s_6chn {
+ sirf,pins = "i2s_6chngrp";
+ sirf,function = "i2s_6chn";
+ };
+ };
ac97_pins_a: ac97@0 {
ac97 {
sirf,pins = "ac97grp";
};
chosen {
- bootargs = "console=ttySC2,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ stdout-path = &scif2;
};
memory {
clock-output-names = "usb_x1";
};
- /* Special CPG clocks */
- cpg_clocks: cpg_clocks@fcfe0000 {
- #clock-cells = <1>;
- compatible = "renesas,r7s72100-cpg-clocks",
- "renesas,rz-cpg-clocks";
- reg = <0xfcfe0000 0x18>;
- clocks = <&extal_clk>, <&usb_x1_clk>;
- clock-output-names = "pll", "i", "g";
- };
-
/* Fixed factor clocks */
b_clk: b_clk {
#clock-cells = <0>;
clock-output-names = "p0";
};
+ /* Special CPG clocks */
+ cpg_clocks: cpg_clocks@fcfe0000 {
+ #clock-cells = <1>;
+ compatible = "renesas,r7s72100-cpg-clocks",
+ "renesas,rz-cpg-clocks";
+ reg = <0xfcfe0000 0x18>;
+ clocks = <&extal_clk>, <&usb_x1_clk>;
+ clock-output-names = "pll", "i", "g";
+ };
+
/* MSTP clocks */
mstp3_clks: mstp3_clks@fcfe0420 {
#clock-cells = <1>;
};
};
- gic: interrupt-controller@e8201000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0xe8201000 0x1000>,
- <0xe8202000 0x1000>;
- };
-
- i2c0: i2c@fcfee000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
- reg = <0xfcfee000 0x44>;
- interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>,
- <0 158 IRQ_TYPE_EDGE_RISING>,
- <0 159 IRQ_TYPE_EDGE_RISING>,
- <0 160 IRQ_TYPE_LEVEL_HIGH>,
- <0 161 IRQ_TYPE_LEVEL_HIGH>,
- <0 162 IRQ_TYPE_LEVEL_HIGH>,
- <0 163 IRQ_TYPE_LEVEL_HIGH>,
- <0 164 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
- clock-frequency = <100000>;
- status = "disabled";
- };
-
- i2c1: i2c@fcfee400 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
- reg = <0xfcfee400 0x44>;
- interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>,
- <0 166 IRQ_TYPE_EDGE_RISING>,
- <0 167 IRQ_TYPE_EDGE_RISING>,
- <0 168 IRQ_TYPE_LEVEL_HIGH>,
- <0 169 IRQ_TYPE_LEVEL_HIGH>,
- <0 170 IRQ_TYPE_LEVEL_HIGH>,
- <0 171 IRQ_TYPE_LEVEL_HIGH>,
- <0 172 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R7S72100_CLK_I2C1>;
- clock-frequency = <100000>;
- status = "disabled";
- };
-
- i2c2: i2c@fcfee800 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
- reg = <0xfcfee800 0x44>;
- interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>,
- <0 174 IRQ_TYPE_EDGE_RISING>,
- <0 175 IRQ_TYPE_EDGE_RISING>,
- <0 176 IRQ_TYPE_LEVEL_HIGH>,
- <0 177 IRQ_TYPE_LEVEL_HIGH>,
- <0 178 IRQ_TYPE_LEVEL_HIGH>,
- <0 179 IRQ_TYPE_LEVEL_HIGH>,
- <0 180 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R7S72100_CLK_I2C2>;
- clock-frequency = <100000>;
- status = "disabled";
- };
-
- i2c3: i2c@fcfeec00 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
- reg = <0xfcfeec00 0x44>;
- interrupts = <0 181 IRQ_TYPE_LEVEL_HIGH>,
- <0 182 IRQ_TYPE_EDGE_RISING>,
- <0 183 IRQ_TYPE_EDGE_RISING>,
- <0 184 IRQ_TYPE_LEVEL_HIGH>,
- <0 185 IRQ_TYPE_LEVEL_HIGH>,
- <0 186 IRQ_TYPE_LEVEL_HIGH>,
- <0 187 IRQ_TYPE_LEVEL_HIGH>,
- <0 188 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp9_clks R7S72100_CLK_I2C3>;
- clock-frequency = <100000>;
- status = "disabled";
- };
-
- mtu2: timer@fcff0000 {
- compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
- reg = <0xfcff0000 0x400>;
- interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "tgi0a";
- clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
- clock-names = "fck";
- status = "disabled";
- };
-
scif0: serial@e8007000 {
compatible = "renesas,scif-r7s72100", "renesas,scif";
reg = <0xe8007000 64>;
#size-cells = <0>;
status = "disabled";
};
+
+ gic: interrupt-controller@e8201000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0xe8201000 0x1000>,
+ <0xe8202000 0x1000>;
+ };
+
+ i2c0: i2c@fcfee000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+ reg = <0xfcfee000 0x44>;
+ interrupts = <0 157 IRQ_TYPE_LEVEL_HIGH>,
+ <0 158 IRQ_TYPE_EDGE_RISING>,
+ <0 159 IRQ_TYPE_EDGE_RISING>,
+ <0 160 IRQ_TYPE_LEVEL_HIGH>,
+ <0 161 IRQ_TYPE_LEVEL_HIGH>,
+ <0 162 IRQ_TYPE_LEVEL_HIGH>,
+ <0 163 IRQ_TYPE_LEVEL_HIGH>,
+ <0 164 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R7S72100_CLK_I2C0>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@fcfee400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+ reg = <0xfcfee400 0x44>;
+ interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>,
+ <0 166 IRQ_TYPE_EDGE_RISING>,
+ <0 167 IRQ_TYPE_EDGE_RISING>,
+ <0 168 IRQ_TYPE_LEVEL_HIGH>,
+ <0 169 IRQ_TYPE_LEVEL_HIGH>,
+ <0 170 IRQ_TYPE_LEVEL_HIGH>,
+ <0 171 IRQ_TYPE_LEVEL_HIGH>,
+ <0 172 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R7S72100_CLK_I2C1>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@fcfee800 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+ reg = <0xfcfee800 0x44>;
+ interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>,
+ <0 174 IRQ_TYPE_EDGE_RISING>,
+ <0 175 IRQ_TYPE_EDGE_RISING>,
+ <0 176 IRQ_TYPE_LEVEL_HIGH>,
+ <0 177 IRQ_TYPE_LEVEL_HIGH>,
+ <0 178 IRQ_TYPE_LEVEL_HIGH>,
+ <0 179 IRQ_TYPE_LEVEL_HIGH>,
+ <0 180 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R7S72100_CLK_I2C2>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@fcfeec00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,riic-r7s72100", "renesas,riic-rz";
+ reg = <0xfcfeec00 0x44>;
+ interrupts = <0 181 IRQ_TYPE_LEVEL_HIGH>,
+ <0 182 IRQ_TYPE_EDGE_RISING>,
+ <0 183 IRQ_TYPE_EDGE_RISING>,
+ <0 184 IRQ_TYPE_LEVEL_HIGH>,
+ <0 185 IRQ_TYPE_LEVEL_HIGH>,
+ <0 186 IRQ_TYPE_LEVEL_HIGH>,
+ <0 187 IRQ_TYPE_LEVEL_HIGH>,
+ <0 188 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp9_clks R7S72100_CLK_I2C3>;
+ clock-frequency = <100000>;
+ status = "disabled";
+ };
+
+ mtu2: timer@fcff0000 {
+ compatible = "renesas,mtu2-r7s72100", "renesas,mtu2";
+ reg = <0xfcff0000 0x400>;
+ interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "tgi0a";
+ clocks = <&mstp3_clks R7S72100_CLK_MTU2>;
+ clock-names = "fck";
+ status = "disabled";
+ };
};
};
chosen {
- bootargs = "console=ttySC0,115200 ignore_loglevel rw";
+ bootargs = "ignore_loglevel rw";
+ stdout-path = &scifa0;
};
memory@40000000 {
voltage-tolerance = <1>; /* 1% */
};
+&cmt1 {
+ status = "okay";
+};
+
&pfc {
scifa0_pins: serial0 {
renesas,groups = "scifa0_data";
};
};
- gic: interrupt-controller@f1001000 {
- compatible = "arm,cortex-a15-gic";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0 0xf1001000 0 0x1000>,
- <0 0xf1002000 0 0x1000>,
- <0 0xf1004000 0 0x2000>,
- <0 0xf1006000 0 0x2000>;
- interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
- };
-
timer {
compatible = "arm,armv7-timer";
interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
<1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
};
+ dmac: dma-multiplexer {
+ compatible = "renesas,shdma-mux";
+ #dma-cells = <1>;
+ dma-channels = <20>;
+ dma-requests = <256>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ dma0: dma-controller@e6700020 {
+ compatible = "renesas,shdma-r8a73a4";
+ reg = <0 0xe6700020 0 0x89e0>;
+ interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
+ 0 200 IRQ_TYPE_LEVEL_HIGH
+ 0 201 IRQ_TYPE_LEVEL_HIGH
+ 0 202 IRQ_TYPE_LEVEL_HIGH
+ 0 203 IRQ_TYPE_LEVEL_HIGH
+ 0 204 IRQ_TYPE_LEVEL_HIGH
+ 0 205 IRQ_TYPE_LEVEL_HIGH
+ 0 206 IRQ_TYPE_LEVEL_HIGH
+ 0 207 IRQ_TYPE_LEVEL_HIGH
+ 0 208 IRQ_TYPE_LEVEL_HIGH
+ 0 209 IRQ_TYPE_LEVEL_HIGH
+ 0 210 IRQ_TYPE_LEVEL_HIGH
+ 0 211 IRQ_TYPE_LEVEL_HIGH
+ 0 212 IRQ_TYPE_LEVEL_HIGH
+ 0 213 IRQ_TYPE_LEVEL_HIGH
+ 0 214 IRQ_TYPE_LEVEL_HIGH
+ 0 215 IRQ_TYPE_LEVEL_HIGH
+ 0 216 IRQ_TYPE_LEVEL_HIGH
+ 0 217 IRQ_TYPE_LEVEL_HIGH
+ 0 218 IRQ_TYPE_LEVEL_HIGH
+ 0 219 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15",
+ "ch16", "ch17", "ch18", "ch19";
+ };
+ };
+
+ pfc: pfc@e6050000 {
+ compatible = "renesas,pfc-r8a73a4";
+ reg = <0 0xe6050000 0 0x9000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupts-extended =
+ <&irqc0 0 0>, <&irqc0 1 0>, <&irqc0 2 0>, <&irqc0 3 0>,
+ <&irqc0 4 0>, <&irqc0 5 0>, <&irqc0 6 0>, <&irqc0 7 0>,
+ <&irqc0 8 0>, <&irqc0 9 0>, <&irqc0 10 0>, <&irqc0 11 0>,
+ <&irqc0 12 0>, <&irqc0 13 0>, <&irqc0 14 0>, <&irqc0 15 0>,
+ <&irqc0 16 0>, <&irqc0 17 0>, <&irqc0 18 0>, <&irqc0 19 0>,
+ <&irqc0 20 0>, <&irqc0 21 0>, <&irqc0 22 0>, <&irqc0 23 0>,
+ <&irqc0 24 0>, <&irqc0 25 0>, <&irqc0 26 0>, <&irqc0 27 0>,
+ <&irqc0 28 0>, <&irqc0 29 0>, <&irqc0 30 0>, <&irqc0 31 0>,
+ <&irqc1 0 0>, <&irqc1 1 0>, <&irqc1 2 0>, <&irqc1 3 0>,
+ <&irqc1 4 0>, <&irqc1 5 0>, <&irqc1 6 0>, <&irqc1 7 0>,
+ <&irqc1 8 0>, <&irqc1 9 0>, <&irqc1 10 0>, <&irqc1 11 0>,
+ <&irqc1 12 0>, <&irqc1 13 0>, <&irqc1 14 0>, <&irqc1 15 0>,
+ <&irqc1 16 0>, <&irqc1 17 0>, <&irqc1 18 0>, <&irqc1 19 0>,
+ <&irqc1 20 0>, <&irqc1 21 0>, <&irqc1 22 0>, <&irqc1 23 0>,
+ <&irqc1 24 0>, <&irqc1 25 0>;
+ };
+
+ i2c5: i2c@e60b0000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
+ reg = <0 0xe60b0000 0 0x428>;
+ interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>;
+
+ status = "disabled";
+ };
+
+ cmt1: timer@e6130000 {
+ compatible = "renesas,cmt-48-r8a73a4", "renesas,cmt-48-gen2";
+ reg = <0 0xe6130000 0 0x1004>;
+ interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+
+ renesas,channels-mask = <0xff>;
+
+ status = "disabled";
+ };
+
irqc0: interrupt-controller@e61c0000 {
compatible = "renesas,irqc-r8a73a4", "renesas,irqc";
#interrupt-cells = <2>;
<0 57 IRQ_TYPE_LEVEL_HIGH>;
};
- dmac: dma-multiplexer@0 {
- compatible = "renesas,shdma-mux";
- #dma-cells = <1>;
- dma-channels = <20>;
- dma-requests = <256>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- dma0: dma-controller@e6700020 {
- compatible = "renesas,shdma-r8a73a4";
- reg = <0 0xe6700020 0 0x89e0>;
- interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH
- 0 200 IRQ_TYPE_LEVEL_HIGH
- 0 201 IRQ_TYPE_LEVEL_HIGH
- 0 202 IRQ_TYPE_LEVEL_HIGH
- 0 203 IRQ_TYPE_LEVEL_HIGH
- 0 204 IRQ_TYPE_LEVEL_HIGH
- 0 205 IRQ_TYPE_LEVEL_HIGH
- 0 206 IRQ_TYPE_LEVEL_HIGH
- 0 207 IRQ_TYPE_LEVEL_HIGH
- 0 208 IRQ_TYPE_LEVEL_HIGH
- 0 209 IRQ_TYPE_LEVEL_HIGH
- 0 210 IRQ_TYPE_LEVEL_HIGH
- 0 211 IRQ_TYPE_LEVEL_HIGH
- 0 212 IRQ_TYPE_LEVEL_HIGH
- 0 213 IRQ_TYPE_LEVEL_HIGH
- 0 214 IRQ_TYPE_LEVEL_HIGH
- 0 215 IRQ_TYPE_LEVEL_HIGH
- 0 216 IRQ_TYPE_LEVEL_HIGH
- 0 217 IRQ_TYPE_LEVEL_HIGH
- 0 218 IRQ_TYPE_LEVEL_HIGH
- 0 219 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "error",
- "ch0", "ch1", "ch2", "ch3",
- "ch4", "ch5", "ch6", "ch7",
- "ch8", "ch9", "ch10", "ch11",
- "ch12", "ch13", "ch14", "ch15",
- "ch16", "ch17", "ch18", "ch19";
- };
- };
-
thermal@e61f0000 {
compatible = "renesas,thermal-r8a73a4", "renesas,rcar-thermal";
reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>,
i2c0: i2c@e6500000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,rmobile-iic";
+ compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6500000 0 0x428>;
interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
i2c1: i2c@e6510000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,rmobile-iic";
+ compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6510000 0 0x428>;
interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
i2c2: i2c@e6520000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,rmobile-iic";
+ compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6520000 0 0x428>;
interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
i2c3: i2c@e6530000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,rmobile-iic";
+ compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6530000 0 0x428>;
interrupts = <0 177 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
i2c4: i2c@e6540000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,rmobile-iic";
+ compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6540000 0 0x428>;
interrupts = <0 178 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- i2c5: i2c@e60b0000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "renesas,rmobile-iic";
- reg = <0 0xe60b0000 0 0x428>;
- interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
i2c6: i2c@e6550000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,rmobile-iic";
+ compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6550000 0 0x428>;
interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
i2c7: i2c@e6560000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,rmobile-iic";
+ compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6560000 0 0x428>;
interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
i2c8: i2c@e6570000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,rmobile-iic";
+ compatible = "renesas,iic-r8a73a4", "renesas,rmobile-iic";
reg = <0 0xe6570000 0 0x428>;
interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
+ scifb0: serial@e6c20000 {
+ compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
+ reg = <0 0xe6c20000 0 0x100>;
+ interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ scifb1: serial@e6c30000 {
+ compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
+ reg = <0 0xe6c30000 0 0x100>;
+ interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
scifa0: serial@e6c40000 {
compatible = "renesas,scifa-r8a73a4", "renesas,scifa";
reg = <0 0xe6c40000 0 0x100>;
status = "disabled";
};
- scifb2: serial@e6c20000 {
- compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
- reg = <0 0xe6c20000 0 0x100>;
- interrupts = <0 148 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- scifb3: serial@e6c30000 {
- compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
- reg = <0 0xe6c30000 0 0x100>;
- interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH>;
- status = "disabled";
- };
-
- scifb4: serial@e6ce0000 {
+ scifb2: serial@e6ce0000 {
compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
reg = <0 0xe6ce0000 0 0x100>;
interrupts = <0 150 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- scifb5: serial@e6cf0000 {
+ scifb3: serial@e6cf0000 {
compatible = "renesas,scifb-r8a73a4", "renesas,scifb";
reg = <0 0xe6cf0000 0 0x100>;
interrupts = <0 151 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
- mmcif0: mmc@ee200000 {
- compatible = "renesas,sh-mmcif";
- reg = <0 0xee200000 0 0x80>;
- interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <4>;
- status = "disabled";
- };
-
- mmcif1: mmc@ee220000 {
- compatible = "renesas,sh-mmcif";
- reg = <0 0xee220000 0 0x80>;
- interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
- reg-io-width = <4>;
- status = "disabled";
- };
-
- pfc: pfc@e6050000 {
- compatible = "renesas,pfc-r8a73a4";
- reg = <0 0xe6050000 0 0x9000>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupts-extended =
- <&irqc0 0 0>, <&irqc0 1 0>, <&irqc0 2 0>, <&irqc0 3 0>,
- <&irqc0 4 0>, <&irqc0 5 0>, <&irqc0 6 0>, <&irqc0 7 0>,
- <&irqc0 8 0>, <&irqc0 9 0>, <&irqc0 10 0>, <&irqc0 11 0>,
- <&irqc0 12 0>, <&irqc0 13 0>, <&irqc0 14 0>, <&irqc0 15 0>,
- <&irqc0 16 0>, <&irqc0 17 0>, <&irqc0 18 0>, <&irqc0 19 0>,
- <&irqc0 20 0>, <&irqc0 21 0>, <&irqc0 22 0>, <&irqc0 23 0>,
- <&irqc0 24 0>, <&irqc0 25 0>, <&irqc0 26 0>, <&irqc0 27 0>,
- <&irqc0 28 0>, <&irqc0 29 0>, <&irqc0 30 0>, <&irqc0 31 0>,
- <&irqc1 0 0>, <&irqc1 1 0>, <&irqc1 2 0>, <&irqc1 3 0>,
- <&irqc1 4 0>, <&irqc1 5 0>, <&irqc1 6 0>, <&irqc1 7 0>,
- <&irqc1 8 0>, <&irqc1 9 0>, <&irqc1 10 0>, <&irqc1 11 0>,
- <&irqc1 12 0>, <&irqc1 13 0>, <&irqc1 14 0>, <&irqc1 15 0>,
- <&irqc1 16 0>, <&irqc1 17 0>, <&irqc1 18 0>, <&irqc1 19 0>,
- <&irqc1 20 0>, <&irqc1 21 0>, <&irqc1 22 0>, <&irqc1 23 0>,
- <&irqc1 24 0>, <&irqc1 25 0>;
- };
-
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a73a4";
reg = <0 0xee100000 0 0x100>;
cap-sd-highspeed;
status = "disabled";
};
+
+ mmcif0: mmc@ee200000 {
+ compatible = "renesas,sh-mmcif";
+ reg = <0 0xee200000 0 0x80>;
+ interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ mmcif1: mmc@ee220000 {
+ compatible = "renesas,sh-mmcif";
+ reg = <0 0xee220000 0 0x80>;
+ interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
+ gic: interrupt-controller@f1001000 {
+ compatible = "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0 0xf1001000 0 0x1000>,
+ <0 0xf1002000 0 0x1000>,
+ <0 0xf1004000 0 0x2000>,
+ <0 0xf1006000 0 0x2000>;
+ interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
};
chosen {
bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
+ stdout-path = &scifa1;
};
memory {
regulator-boot-on;
};
- gpio-keys {
+ keyboard {
compatible = "gpio-keys";
power-key {
status = "okay";
};
+
+&tmu0 {
+ status = "okay";
+};
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
};
/* irqpin1: IRQ8 - IRQ15 */
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
};
/* irqpin2: IRQ16 - IRQ23 */
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
};
/* irqpin3: IRQ24 - IRQ31 */
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH
0 149 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp2_clks R8A7740_CLK_INTCA>;
};
ether: ethernet@e9a00000 {
compatible = "renesas,scifa-r8a7740", "renesas,scifa";
reg = <0xe6c60000 0x100>;
interrupts = <0 102 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp2_clks R8A7740_CLK_SCIFA0>;
+ clocks = <&mstp2_clks R8A7740_CLK_SCIFA2>;
clock-names = "sci_ick";
status = "disabled";
};
status = "disabled";
};
+ tmu0: timer@fff80000 {
+ compatible = "renesas,tmu-r8a7740", "renesas,tmu";
+ reg = <0xfff80000 0x2c>;
+ interrupts = <0 198 IRQ_TYPE_LEVEL_HIGH>,
+ <0 199 IRQ_TYPE_LEVEL_HIGH>,
+ <0 200 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7740_CLK_TMU0>;
+ clock-names = "fck";
+
+ #renesas,channels = <3>;
+
+ status = "disabled";
+ };
+
+ tmu1: timer@fff90000 {
+ compatible = "renesas,tmu-r8a7740", "renesas,tmu";
+ reg = <0xfff90000 0x2c>;
+ interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>,
+ <0 171 IRQ_TYPE_LEVEL_HIGH>,
+ <0 172 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7740_CLK_TMU1>;
+ clock-names = "fck";
+
+ #renesas,channels = <3>;
+
+ status = "disabled";
+ };
+
clocks {
#address-cells = <1>;
#size-cells = <1>;
clocks = <&cpg_clocks R8A7740_CLK_S>,
<&cpg_clocks R8A7740_CLK_S>, <&sub_clk>,
<&cpg_clocks R8A7740_CLK_B>,
- <&sub_clk>, <&sub_clk>,
+ <&cpg_clocks R8A7740_CLK_HPP>, <&sub_clk>,
<&cpg_clocks R8A7740_CLK_B>;
#clock-cells = <1>;
renesas,clock-indices = <
mstp2_clks: mstp2_clks@e6150138 {
compatible = "renesas,r8a7740-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0xe6150138 4>, <0xe6150040 4>;
- clocks = <&sub_clk>, <&sub_clk>,
- <&cpg_clocks R8A7740_CLK_HP>,
+ clocks = <&sub_clk>, <&cpg_clocks R8A7740_CLK_HP>,
+ <&sub_clk>, <&cpg_clocks R8A7740_CLK_HP>,
<&cpg_clocks R8A7740_CLK_HP>,
<&cpg_clocks R8A7740_CLK_HP>,
<&cpg_clocks R8A7740_CLK_HP>,
<&sub_clk>;
#clock-cells = <1>;
renesas,clock-indices = <
- R8A7740_CLK_SCIFA6 R8A7740_CLK_SCIFA7
+ R8A7740_CLK_SCIFA6 R8A7740_CLK_INTCA
+ R8A7740_CLK_SCIFA7
R8A7740_CLK_DMAC1 R8A7740_CLK_DMAC2
R8A7740_CLK_DMAC3 R8A7740_CLK_USBDMAC
R8A7740_CLK_SCIFA5 R8A7740_CLK_SCIFB
R8A7740_CLK_SCIFA4
>;
clock-output-names =
- "scifa6", "scifa7", "dmac1", "dmac2", "dmac3",
+ "scifa6", "intca",
+ "scifa7", "dmac1", "dmac2", "dmac3",
"usbdmac", "scifa5", "scifb", "scifa0", "scifa1",
"scifa2", "scifa3", "scifa4";
};
};
chosen {
- bootargs = "console=ttySC0,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
+ bootargs = "ignore_loglevel root=/dev/nfs ip=dhcp rw";
+ stdout-path = &scif0;
};
memory {
status = "okay";
};
+&tmu0 {
+ status = "okay";
+};
+
&pfc {
scif0_pins: serial0 {
renesas,groups = "scif0_data_a", "scif0_ctrl";
status = "disabled";
};
+ tmu0: timer@ffd80000 {
+ compatible = "renesas,tmu-r8a7778", "renesas,tmu";
+ reg = <0xffd80000 0x30>;
+ interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>,
+ <0 33 IRQ_TYPE_LEVEL_HIGH>,
+ <0 34 IRQ_TYPE_LEVEL_HIGH>;
+
+ #renesas,channels = <3>;
+
+ status = "disabled";
+ };
+
+ tmu1: timer@ffd81000 {
+ compatible = "renesas,tmu-r8a7778", "renesas,tmu";
+ reg = <0xffd81000 0x30>;
+ interrupts = <0 36 IRQ_TYPE_LEVEL_HIGH>,
+ <0 37 IRQ_TYPE_LEVEL_HIGH>,
+ <0 38 IRQ_TYPE_LEVEL_HIGH>;
+
+ #renesas,channels = <3>;
+
+ status = "disabled";
+ };
+
+ tmu2: timer@ffd82000 {
+ compatible = "renesas,tmu-r8a7778", "renesas,tmu";
+ reg = <0xffd82000 0x30>;
+ interrupts = <0 40 IRQ_TYPE_LEVEL_HIGH>,
+ <0 41 IRQ_TYPE_LEVEL_HIGH>,
+ <0 42 IRQ_TYPE_LEVEL_HIGH>;
+
+ #renesas,channels = <3>;
+
+ status = "disabled";
+ };
+
scif0: serial@ffe40000 {
compatible = "renesas,scif-r8a7778", "renesas,scif";
reg = <0xffe40000 0x100>;
compatible = "renesas,sdhi-r8a7778";
reg = <0xffe4c000 0x100>;
interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>;
- cap-sd-highspeed;
- cap-sdio-irq;
status = "disabled";
};
compatible = "renesas,sdhi-r8a7778";
reg = <0xffe4d000 0x100>;
interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>;
- cap-sd-highspeed;
- cap-sdio-irq;
status = "disabled";
};
compatible = "renesas,sdhi-r8a7778";
reg = <0xffe4f000 0x100>;
interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
- cap-sd-highspeed;
- cap-sdio-irq;
status = "disabled";
};
chosen {
bootargs = "console=ttySC2,115200 ignore_loglevel root=/dev/nfs ip=on";
+ stdout-path = &scif2;
};
memory {
gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>;
};
};
+
+ vga-encoder {
+ compatible = "adi,adv7123";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ vga_enc_in: endpoint {
+ remote-endpoint = <&du_out_rgb0>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ vga_enc_out: endpoint {
+ remote-endpoint = <&vga_in>;
+ };
+ };
+ };
+ };
+
+ vga {
+ compatible = "vga-connector";
+
+ port {
+ vga_in: endpoint {
+ remote-endpoint = <&vga_enc_out>;
+ };
+ };
+ };
+
+ lvds-encoder {
+ compatible = "thine,thc63lvdm83d";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ lvds_enc_in: endpoint {
+ remote-endpoint = <&du_out_rgb1>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ lvds_connector: endpoint {
+ };
+ };
+ };
+ };
+};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ ports {
+ port@0 {
+ endpoint {
+ remote-endpoint = <&vga_enc_in>;
+ };
+ };
+ port@1 {
+ endpoint {
+ remote-endpoint = <&lvds_enc_in>;
+ };
+ };
+ };
};
&irqpin0 {
};
&pfc {
+ du_pins: du {
+ du0 {
+ renesas,groups = "du0_rgb888", "du0_sync_1", "du0_clk_out_0";
+ renesas,function = "du0";
+ };
+ du1 {
+ renesas,groups = "du1_rgb666", "du1_sync_1", "du1_clk_out";
+ renesas,function = "du1";
+ };
+ };
+
lan0_pins: lan0 {
intc {
renesas,groups = "intc_irq1_b";
};
sata: sata@fc600000 {
- compatible = "renesas,rcar-sata";
+ compatible = "renesas,sata-r8a7779", "renesas,rcar-sata";
reg = <0xfc600000 0x2000>;
interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp1_clks R8A7779_CLK_SATA>;
reg = <0xffe4c000 0x100>;
interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI0>;
- cap-sd-highspeed;
- cap-sdio-irq;
status = "disabled";
};
reg = <0xffe4d000 0x100>;
interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI1>;
- cap-sd-highspeed;
- cap-sdio-irq;
status = "disabled";
};
reg = <0xffe4e000 0x100>;
interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI2>;
- cap-sd-highspeed;
- cap-sdio-irq;
status = "disabled";
};
reg = <0xffe4f000 0x100>;
interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7779_CLK_SDHI3>;
- cap-sd-highspeed;
- cap-sdio-irq;
status = "disabled";
};
status = "disabled";
};
+ du: display@fff80000 {
+ compatible = "renesas,du-r8a7779";
+ reg = <0 0xfff80000 0 0x40000>;
+ interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7779_CLK_DU>;
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_rgb0: endpoint {
+ };
+ };
+ port@1 {
+ reg = <1>;
+ du_out_rgb1: endpoint {
+ };
+ };
+ };
+ };
+
clocks {
#address-cells = <1>;
#size-cells = <1>;
* kind, whether express or implied.
*/
+/*
+ * SSI-AK4643
+ *
+ * SW1: 1: AK4643
+ * 2: CN22
+ * 3: ADV7511
+ *
+ * This command is required when Playback/Capture
+ *
+ * amixer set "LINEOUT Mixer DACL" on
+ * amixer set "DVC Out" 100%
+ * amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ * amixer set "DVC Out Mute" on
+ * amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
+ * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ * amixer set "DVC Out Ramp" on
+ * aplay xxx.wav &
+ * amixer set "DVC Out" 80% // Volume Down
+ * amixer set "DVC Out" 100% // Volume Up
+ */
+
/dts-v1/;
#include "r8a7790.dtsi"
#include <dt-bindings/gpio/gpio.h>
compatible = "renesas,lager", "renesas,r8a7790";
aliases {
- serial6 = &scif0;
- serial7 = &scif1;
+ serial6 = &scifa0;
+ serial7 = &scifa1;
};
chosen {
bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ stdout-path = &scifa0;
};
memory@40000000 {
#size-cells = <1>;
};
- gpio_keys {
+ keyboard {
compatible = "gpio-keys";
button@1 {
states = <3300000 1
1800000 0>;
};
+
+ sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,format = "left_j";
+ simple-audio-card,bitclock-master = <&sndcodec>;
+ simple-audio-card,frame-master = <&sndcodec>;
+
+ sndcpu: simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+
+ sndcodec: simple-audio-card,codec {
+ sound-dai = <&ak4643>;
+ system-clock-frequency = <11289600>;
+ };
+ };
+
+ vga-encoder {
+ compatible = "adi,adv7123";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ adv7123_in: endpoint {
+ remote-endpoint = <&du_out_rgb>;
+ };
+ };
+ port@1 {
+ reg = <1>;
+ adv7123_out: endpoint {
+ remote-endpoint = <&vga_in>;
+ };
+ };
+ };
+ };
+
+ vga {
+ compatible = "vga-connector";
+
+ port {
+ vga_in: endpoint {
+ remote-endpoint = <&adv7123_out>;
+ };
+ };
+ };
+};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ ports {
+ port@0 {
+ endpoint {
+ remote-endpoint = <&adv7123_in>;
+ };
+ };
+ port@2 {
+ lvds_connector: endpoint {
+ };
+ };
+ };
};
&extal_clk {
};
&pfc {
- pinctrl-0 = <&du_pins>;
- pinctrl-names = "default";
-
du_pins: du {
renesas,groups = "du_rgb666", "du_sync_1", "du_clk_out_0";
renesas,function = "du";
};
- scif0_pins: serial0 {
- renesas,groups = "scif0_data";
- renesas,function = "scif0";
+ scifa0_pins: serial0 {
+ renesas,groups = "scifa0_data";
+ renesas,function = "scifa0";
};
ether_pins: ether {
renesas,function = "intc";
};
- scif1_pins: serial1 {
- renesas,groups = "scif1_data";
- renesas,function = "scif1";
+ scifa1_pins: serial1 {
+ renesas,groups = "scifa1_data";
+ renesas,function = "scifa1";
};
sdhi0_pins: sd0 {
renesas,function = "iic3";
};
+ hsusb_pins: hsusb {
+ renesas,groups = "usb0_ovc_vbus";
+ renesas,function = "usb0";
+ };
+
usb0_pins: usb0 {
renesas,groups = "usb0";
renesas,function = "usb0";
renesas,groups = "vin1_data8", "vin1_clk";
renesas,function = "vin1";
};
+
+ sound_pins: sound {
+ renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+ renesas,function = "ssi";
+ };
+
+ sound_clk_pins: sound_clk {
+ renesas,groups = "audio_clk_a";
+ renesas,function = "audio_clk";
+ };
};
ðer {
};
};
-&scif0 {
- pinctrl-0 = <&scif0_pins>;
+&scifa0 {
+ pinctrl-0 = <&scifa0_pins>;
pinctrl-names = "default";
status = "okay";
};
-&scif1 {
- pinctrl-0 = <&scif1_pins>;
+&scifa1 {
+ pinctrl-0 = <&scifa1_pins>;
pinctrl-names = "default";
status = "okay";
pinctrl-0 = <&iic2_pins>;
pinctrl-names = "default";
+ clock-frequency = <100000>;
+
+ ak4643: sound-codec@12 {
+ compatible = "asahi-kasei,ak4643";
+ #sound-dai-cells = <0>;
+ reg = <0x12>;
+ };
+
composite-in@20 {
compatible = "adi,adv7180";
reg = <0x20>;
pinctrl-names = "default";
};
+&xhci {
+ status = "okay";
+ pinctrl-0 = <&usb2_pins>;
+ pinctrl-names = "default";
+};
+
&pci2 {
status = "okay";
pinctrl-0 = <&usb2_pins>;
pinctrl-names = "default";
};
+&hsusb {
+ status = "okay";
+ pinctrl-0 = <&hsusb_pins>;
+ pinctrl-names = "default";
+ renesas,enable-gpio = <&gpio5 18 GPIO_ACTIVE_HIGH>;
+};
+
+&usbphy {
+ status = "okay";
+};
+
/* composite video input */
&vin1 {
pinctrl-0 = <&vin1_pins>;
};
};
};
+
+&rcar_sound {
+ pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ pinctrl-names = "default";
+
+ #sound-dai-cells = <0>;
+
+ status = "okay";
+
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi0 &src2 &dvc0>;
+ capture = <&ssi1 &src3 &dvc1>;
+ };
+ };
+};
+
+&ssi1 {
+ shared-pin;
+};
#dma-cells = <1>;
dma-channels = <15>;
};
+
+ audma0: dma-controller@ec700000 {
+ compatible = "renesas,rcar-dmac";
+ reg = <0 0xec700000 0 0x10000>;
+ interrupts = <0 346 IRQ_TYPE_LEVEL_HIGH
+ 0 320 IRQ_TYPE_LEVEL_HIGH
+ 0 321 IRQ_TYPE_LEVEL_HIGH
+ 0 322 IRQ_TYPE_LEVEL_HIGH
+ 0 323 IRQ_TYPE_LEVEL_HIGH
+ 0 324 IRQ_TYPE_LEVEL_HIGH
+ 0 325 IRQ_TYPE_LEVEL_HIGH
+ 0 326 IRQ_TYPE_LEVEL_HIGH
+ 0 327 IRQ_TYPE_LEVEL_HIGH
+ 0 328 IRQ_TYPE_LEVEL_HIGH
+ 0 329 IRQ_TYPE_LEVEL_HIGH
+ 0 330 IRQ_TYPE_LEVEL_HIGH
+ 0 331 IRQ_TYPE_LEVEL_HIGH
+ 0 332 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12";
+ clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC0>;
+ clock-names = "fck";
+ #dma-cells = <1>;
+ dma-channels = <13>;
+ };
+
+ audma1: dma-controller@ec720000 {
+ compatible = "renesas,rcar-dmac";
+ reg = <0 0xec720000 0 0x10000>;
+ interrupts = <0 347 IRQ_TYPE_LEVEL_HIGH
+ 0 333 IRQ_TYPE_LEVEL_HIGH
+ 0 334 IRQ_TYPE_LEVEL_HIGH
+ 0 335 IRQ_TYPE_LEVEL_HIGH
+ 0 336 IRQ_TYPE_LEVEL_HIGH
+ 0 337 IRQ_TYPE_LEVEL_HIGH
+ 0 338 IRQ_TYPE_LEVEL_HIGH
+ 0 339 IRQ_TYPE_LEVEL_HIGH
+ 0 340 IRQ_TYPE_LEVEL_HIGH
+ 0 341 IRQ_TYPE_LEVEL_HIGH
+ 0 342 IRQ_TYPE_LEVEL_HIGH
+ 0 343 IRQ_TYPE_LEVEL_HIGH
+ 0 344 IRQ_TYPE_LEVEL_HIGH
+ 0 345 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12";
+ clocks = <&mstp5_clks R8A7790_CLK_AUDIO_DMAC1>;
+ clock-names = "fck";
+ #dma-cells = <1>;
+ dma-channels = <13>;
+ };
+
+ audmapp: dma-controller@ec740000 {
+ compatible = "renesas,rcar-audmapp";
+ #dma-cells = <1>;
+
+ reg = <0 0xec740000 0 0x200>;
+ };
+
i2c0: i2c@e6508000 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0 0xe6500000 0 0x425>;
interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_IIC0>;
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>;
+ dma-names = "tx", "rx";
status = "disabled";
};
reg = <0 0xe6510000 0 0x425>;
interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_IIC1>;
+ dmas = <&dmac0 0x65>, <&dmac0 0x66>;
+ dma-names = "tx", "rx";
status = "disabled";
};
reg = <0 0xe6520000 0 0x425>;
interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_IIC2>;
+ dmas = <&dmac0 0x69>, <&dmac0 0x6a>;
+ dma-names = "tx", "rx";
status = "disabled";
};
reg = <0 0xe60b0000 0 0x425>;
interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7790_CLK_IICDVFS>;
+ dmas = <&dmac0 0x77>, <&dmac0 0x78>;
+ dma-names = "tx", "rx";
status = "disabled";
};
- mmcif0: mmcif@ee200000 {
+ mmcif0: mmc@ee200000 {
compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif";
reg = <0 0xee200000 0 0x80>;
interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>;
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
+ dma-names = "tx", "rx";
reg-io-width = <4>;
status = "disabled";
};
reg = <0 0xee220000 0 0x80>;
interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>;
+ dmas = <&dmac0 0xe1>, <&dmac0 0xe2>;
+ dma-names = "tx", "rx";
reg-io-width = <4>;
status = "disabled";
};
reg = <0 0xee100000 0 0x200>;
interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI0>;
- cap-sd-highspeed;
status = "disabled";
};
reg = <0 0xee120000 0 0x200>;
interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI1>;
- cap-sd-highspeed;
status = "disabled";
};
reg = <0 0xee140000 0 0x100>;
interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI2>;
- cap-sd-highspeed;
status = "disabled";
};
reg = <0 0xee160000 0 0x100>;
interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7790_CLK_SDHI3>;
- cap-sd-highspeed;
status = "disabled";
};
status = "disabled";
};
+ hsusb: usb@e6590000 {
+ compatible = "renesas,usbhs-r8a7790";
+ reg = <0 0xe6590000 0 0x100>;
+ interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
+ renesas,buswait = <4>;
+ phys = <&usb0 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usbphy: usb-phy@e6590100 {
+ compatible = "renesas,usb-phy-r8a7790";
+ reg = <0 0xe6590100 0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mstp7_clks R8A7790_CLK_HSUSB>;
+ clock-names = "usbhs";
+ status = "disabled";
+
+ usb0: usb-channel@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+ usb2: usb-channel@2 {
+ reg = <2>;
+ #phy-cells = <1>;
+ };
+ };
+
vin0: video@e6ef0000 {
compatible = "renesas,vin-r8a7790";
clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
status = "disabled";
};
+ vsp1@fe920000 {
+ compatible = "renesas,vsp1";
+ reg = <0 0xfe920000 0 0x8000>;
+ interrupts = <0 266 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7790_CLK_VSP1_R>;
+
+ renesas,has-sru;
+ renesas,#rpf = <5>;
+ renesas,#uds = <1>;
+ renesas,#wpf = <4>;
+ };
+
+ vsp1@fe928000 {
+ compatible = "renesas,vsp1";
+ reg = <0 0xfe928000 0 0x8000>;
+ interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7790_CLK_VSP1_S>;
+
+ renesas,has-lut;
+ renesas,has-sru;
+ renesas,#rpf = <5>;
+ renesas,#uds = <3>;
+ renesas,#wpf = <4>;
+ };
+
+ vsp1@fe930000 {
+ compatible = "renesas,vsp1";
+ reg = <0 0xfe930000 0 0x8000>;
+ interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU0>;
+
+ renesas,has-lif;
+ renesas,has-lut;
+ renesas,#rpf = <4>;
+ renesas,#uds = <1>;
+ renesas,#wpf = <4>;
+ };
+
+ vsp1@fe938000 {
+ compatible = "renesas,vsp1";
+ reg = <0 0xfe938000 0 0x8000>;
+ interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7790_CLK_VSP1_DU1>;
+
+ renesas,has-lif;
+ renesas,has-lut;
+ renesas,#rpf = <4>;
+ renesas,#uds = <1>;
+ renesas,#wpf = <4>;
+ };
+
+ du: display@feb00000 {
+ compatible = "renesas,du-r8a7790";
+ reg = <0 0xfeb00000 0 0x70000>,
+ <0 0xfeb90000 0 0x1c>,
+ <0 0xfeb94000 0 0x1c>;
+ reg-names = "du", "lvds.0", "lvds.1";
+ interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
+ <0 268 IRQ_TYPE_LEVEL_HIGH>,
+ <0 269 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7790_CLK_DU0>,
+ <&mstp7_clks R8A7790_CLK_DU1>,
+ <&mstp7_clks R8A7790_CLK_DU2>,
+ <&mstp7_clks R8A7790_CLK_LVDS0>,
+ <&mstp7_clks R8A7790_CLK_LVDS1>;
+ clock-names = "du.0", "du.1", "du.2", "lvds.0", "lvds.1";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_rgb: endpoint {
+ };
+ };
+ port@1 {
+ reg = <1>;
+ du_out_lvds0: endpoint {
+ };
+ };
+ port@2 {
+ reg = <2>;
+ du_out_lvds1: endpoint {
+ };
+ };
+ };
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
#clock-cells = <0>;
clock-output-names = "sd2";
};
- sd3_clk: sd3_clk@e615007c {
+ sd3_clk: sd3_clk@e615026c {
compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock";
- reg = <0 0xe615007c 0 4>;
+ reg = <0 0xe615026c 0 4>;
clocks = <&pll1_div2_clk>;
#clock-cells = <0>;
clock-output-names = "sd3";
mstp1_clks: mstp1_clks@e6150134 {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
- clocks = <&m2_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
- <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>,
- <&zs_clk>;
+ clocks = <&zs_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&m2_clk>,
+ <&zs_clk>, <&p_clk>, <&zg_clk>, <&zs_clk>, <&zs_clk>,
+ <&zs_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
+ <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>;
#clock-cells = <1>;
renesas,clock-indices = <
- R8A7790_CLK_JPU R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2
- R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1
- R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S
+ R8A7790_CLK_VCP1 R8A7790_CLK_VCP0 R8A7790_CLK_VPC1
+ R8A7790_CLK_VPC0 R8A7790_CLK_JPU R8A7790_CLK_SSP1
+ R8A7790_CLK_TMU1 R8A7790_CLK_3DG R8A7790_CLK_2DDMAC
+ R8A7790_CLK_FDP1_2 R8A7790_CLK_FDP1_1 R8A7790_CLK_FDP1_0
+ R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 R8A7790_CLK_CMT0
+ R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1 R8A7790_CLK_VSP1_DU0
+ R8A7790_CLK_VSP1_R R8A7790_CLK_VSP1_S
>;
clock-output-names =
- "jpu", "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
- "vsp1-du0", "vsp1-rt", "vsp1-sy";
+ "vcp1", "vcp0", "vpc1", "vpc0", "jpu", "ssp1",
+ "tmu1", "3dg", "2ddmac", "fdp1-2", "fdp1-1",
+ "fdp1-0", "tmu3", "tmu2", "cmt0", "tmu0",
+ "vsp1-du1", "vsp1-du0", "vsp1-rt", "vsp1-sy";
};
mstp2_clks: mstp2_clks@e6150138 {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
clocks = <&hp_clk>, <&cp_clk>, <&mmc1_clk>, <&sd3_clk>,
<&sd2_clk>, <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, <&mmc0_clk>,
- <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>;
+ <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>,
+ <&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
renesas,clock-indices = <
R8A7790_CLK_IIC2 R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3
R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 R8A7790_CLK_MMCIF0
R8A7790_CLK_IIC0 R8A7790_CLK_PCIEC R8A7790_CLK_IIC1 R8A7790_CLK_SSUSB R8A7790_CLK_CMT1
+ R8A7790_CLK_USBDMAC0 R8A7790_CLK_USBDMAC1
>;
clock-output-names =
"iic2", "tpu0", "mmcif1", "sdhi3",
"sdhi2", "sdhi1", "sdhi0", "mmcif0",
- "iic0", "pciec", "iic1", "ssusb", "cmt1";
+ "iic0", "pciec", "iic1", "ssusb", "cmt1",
+ "usbdmac0", "usbdmac1";
};
mstp5_clks: mstp5_clks@e6150144 {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
- clocks = <&extal_clk>, <&p_clk>;
+ clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>, <&p_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <R8A7790_CLK_THERMAL R8A7790_CLK_PWM>;
- clock-output-names = "thermal", "pwm";
+ renesas,clock-indices = <R8A7790_CLK_AUDIO_DMAC0 R8A7790_CLK_AUDIO_DMAC1
+ R8A7790_CLK_THERMAL R8A7790_CLK_PWM>;
+ clock-output-names = "audmac0", "audmac1", "thermal", "pwm";
};
mstp7_clks: mstp7_clks@e615014c {
compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks";
status = "disabled";
};
+ xhci: usb@ee000000 {
+ compatible = "renesas,xhci-r8a7790";
+ reg = <0 0xee000000 0 0xc00>;
+ interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7790_CLK_SSUSB>;
+ phys = <&usb2 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
pci0: pci@ee090000 {
compatible = "renesas,pci-r8a7790";
device_type = "pci";
interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb@0,1 {
+ reg = <0x800 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb0 0>;
+ phy-names = "usb";
+ };
+
+ usb@0,2 {
+ reg = <0x1000 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb0 0>;
+ phy-names = "usb";
+ };
};
pci1: pci@ee0b0000 {
interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb@0,1 {
+ reg = <0x800 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb2 0>;
+ phy-names = "usb";
+ };
+
+ usb@0,2 {
+ reg = <0x1000 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb2 0>;
+ phy-names = "usb";
+ };
};
pciec: pcie@fe000000 {
status = "disabled";
};
- rcar_sound: rcar_sound@0xec500000 {
+ rcar_sound: rcar_sound@ec500000 {
#sound-dai-cells = <1>;
compatible = "renesas,rcar_sound-r8a7790", "renesas,rcar_sound-gen2", "renesas,rcar_sound";
reg = <0 0xec500000 0 0x1000>, /* SCU */
chosen {
bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ stdout-path = &scif0;
};
memory@40000000 {
pinctrl-names = "default";
};
+&hsusb {
+ status = "okay";
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+ renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+};
+
+&usbphy {
+ status = "okay";
+};
+
&pcie_bus_clk {
status = "okay";
};
* kind, whether express or implied.
*/
+/*
+ * SSI-AK4643
+ *
+ * SW1: 1: AK4643
+ * 2: CN22
+ * 3: ADV7511
+ *
+ * This command is required when Playback/Capture
+ *
+ * amixer set "LINEOUT Mixer DACL" on
+ * amixer set "DVC Out" 100%
+ * amixer set "DVC In" 100%
+ *
+ * You can use Mute
+ *
+ * amixer set "DVC Out Mute" on
+ * amixer set "DVC In Mute" on
+ *
+ * You can use Volume Ramp
+ *
+ * amixer set "DVC Out Ramp Up Rate" "0.125 dB/64 steps"
+ * amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
+ * amixer set "DVC Out Ramp" on
+ * aplay xxx.wav &
+ * amixer set "DVC Out" 80% // Volume Down
+ * amixer set "DVC Out" 100% // Volume Up
+ */
+
/dts-v1/;
#include "r8a7791.dtsi"
#include <dt-bindings/gpio/gpio.h>
};
chosen {
- bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ stdout-path = &scif0;
};
memory@40000000 {
#size-cells = <1>;
};
- gpio-keys {
+ keyboard {
compatible = "gpio-keys";
key-1 {
compatible = "gpio-leds";
led6 {
gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ label = "LED6";
};
led7 {
gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+ label = "LED7";
};
led8 {
gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+ label = "LED8";
};
};
states = <3300000 1
1800000 0>;
};
+
+ sound {
+ compatible = "simple-audio-card";
+
+ simple-audio-card,format = "left_j";
+ simple-audio-card,bitclock-master = <&sndcodec>;
+ simple-audio-card,frame-master = <&sndcodec>;
+
+ sndcpu: simple-audio-card,cpu {
+ sound-dai = <&rcar_sound>;
+ };
+
+ sndcodec: simple-audio-card,codec {
+ sound-dai = <&ak4643>;
+ system-clock-frequency = <11289600>;
+ };
+ };
+};
+
+&du {
+ pinctrl-0 = <&du_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+
+ ports {
+ port@1 {
+ lvds_connector: endpoint {
+ };
+ };
+ };
};
&extal_clk {
};
&pfc {
- pinctrl-0 = <&du_pins>;
- pinctrl-names = "default";
-
i2c2_pins: i2c2 {
renesas,groups = "i2c2";
renesas,function = "i2c2";
renesas,groups = "vin1_data8", "vin1_clk";
renesas,function = "vin1";
};
+
+ sound_pins: sound {
+ renesas,groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
+ renesas,function = "ssi";
+ };
+
+ sound_clk_pins: sound_clk {
+ renesas,groups = "audio_clk_a";
+ renesas,function = "audio_clk";
+ };
};
ðer {
pinctrl-names = "default";
status = "okay";
- clock-frequency = <400000>;
+ clock-frequency = <100000>;
+
+ ak4643: sound-codec@12 {
+ compatible = "asahi-kasei,ak4643";
+ #sound-dai-cells = <0>;
+ reg = <0x12>;
+ };
composite-in@20 {
compatible = "adi,adv7180";
pinctrl-names = "default";
};
+&hsusb {
+ status = "okay";
+ pinctrl-0 = <&usb0_pins>;
+ pinctrl-names = "default";
+ renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
+};
+
+&usbphy {
+ status = "okay";
+};
+
&pcie_bus_clk {
status = "okay";
};
};
};
};
+
+&rcar_sound {
+ pinctrl-0 = <&sound_pins &sound_clk_pins>;
+ pinctrl-names = "default";
+
+ #sound-dai-cells = <0>;
+
+ status = "okay";
+
+ rcar_sound,dai {
+ dai0 {
+ playback = <&ssi0 &src2 &dvc0>;
+ capture = <&ssi1 &src3 &dvc1>;
+ };
+ };
+};
+
+&ssi1 {
+ shared-pin;
+};
/*
* Device Tree Source for the r8a7791 SoC
*
- * Copyright (C) 2013 Renesas Electronics Corporation
+ * Copyright (C) 2013-2014 Renesas Electronics Corporation
* Copyright (C) 2013-2014 Renesas Solutions Corp.
* Copyright (C) 2014 Cogent Embedded Inc.
*
dma-channels = <15>;
};
+ audma0: dma-controller@ec700000 {
+ compatible = "renesas,rcar-dmac";
+ reg = <0 0xec700000 0 0x10000>;
+ interrupts = <0 346 IRQ_TYPE_LEVEL_HIGH
+ 0 320 IRQ_TYPE_LEVEL_HIGH
+ 0 321 IRQ_TYPE_LEVEL_HIGH
+ 0 322 IRQ_TYPE_LEVEL_HIGH
+ 0 323 IRQ_TYPE_LEVEL_HIGH
+ 0 324 IRQ_TYPE_LEVEL_HIGH
+ 0 325 IRQ_TYPE_LEVEL_HIGH
+ 0 326 IRQ_TYPE_LEVEL_HIGH
+ 0 327 IRQ_TYPE_LEVEL_HIGH
+ 0 328 IRQ_TYPE_LEVEL_HIGH
+ 0 329 IRQ_TYPE_LEVEL_HIGH
+ 0 330 IRQ_TYPE_LEVEL_HIGH
+ 0 331 IRQ_TYPE_LEVEL_HIGH
+ 0 332 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12";
+ clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC0>;
+ clock-names = "fck";
+ #dma-cells = <1>;
+ dma-channels = <13>;
+ };
+
+ audma1: dma-controller@ec720000 {
+ compatible = "renesas,rcar-dmac";
+ reg = <0 0xec720000 0 0x10000>;
+ interrupts = <0 347 IRQ_TYPE_LEVEL_HIGH
+ 0 333 IRQ_TYPE_LEVEL_HIGH
+ 0 334 IRQ_TYPE_LEVEL_HIGH
+ 0 335 IRQ_TYPE_LEVEL_HIGH
+ 0 336 IRQ_TYPE_LEVEL_HIGH
+ 0 337 IRQ_TYPE_LEVEL_HIGH
+ 0 338 IRQ_TYPE_LEVEL_HIGH
+ 0 339 IRQ_TYPE_LEVEL_HIGH
+ 0 340 IRQ_TYPE_LEVEL_HIGH
+ 0 341 IRQ_TYPE_LEVEL_HIGH
+ 0 342 IRQ_TYPE_LEVEL_HIGH
+ 0 343 IRQ_TYPE_LEVEL_HIGH
+ 0 344 IRQ_TYPE_LEVEL_HIGH
+ 0 345 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "error",
+ "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12";
+ clocks = <&mstp5_clks R8A7791_CLK_AUDIO_DMAC1>;
+ clock-names = "fck";
+ #dma-cells = <1>;
+ dma-channels = <13>;
+ };
+
+ audmapp: dma-controller@ec740000 {
+ compatible = "renesas,rcar-audmapp";
+ #dma-cells = <1>;
+
+ reg = <0 0xec740000 0 0x200>;
+ };
+
/* The memory map in the User's Manual maps the cores to bus numbers */
i2c0: i2c@e6508000 {
#address-cells = <1>;
reg = <0 0xe60b0000 0 0x425>;
interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp9_clks R8A7791_CLK_IICDVFS>;
+ dmas = <&dmac0 0x77>, <&dmac0 0x78>;
+ dma-names = "tx", "rx";
status = "disabled";
};
reg = <0 0xe6500000 0 0x425>;
interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_IIC0>;
+ dmas = <&dmac0 0x61>, <&dmac0 0x62>;
+ dma-names = "tx", "rx";
status = "disabled";
};
reg = <0 0xe6510000 0 0x425>;
interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>;
clocks = <&mstp3_clks R8A7791_CLK_IIC1>;
+ dmas = <&dmac0 0x65>, <&dmac0 0x66>;
+ dma-names = "tx", "rx";
status = "disabled";
};
#gpio-range-cells = <3>;
};
+ mmcif0: mmc@ee200000 {
+ compatible = "renesas,mmcif-r8a7791", "renesas,sh-mmcif";
+ reg = <0 0xee200000 0 0x80>;
+ interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7791_CLK_MMCIF0>;
+ dmas = <&dmac0 0xd1>, <&dmac0 0xd2>;
+ dma-names = "tx", "rx";
+ reg-io-width = <4>;
+ status = "disabled";
+ };
+
sdhi0: sd@ee100000 {
compatible = "renesas,sdhi-r8a7791";
reg = <0 0xee100000 0 0x200>;
status = "disabled";
};
+ hsusb: usb@e6590000 {
+ compatible = "renesas,usbhs-r8a7791";
+ reg = <0 0xe6590000 0 0x100>;
+ interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7791_CLK_HSUSB>;
+ renesas,buswait = <4>;
+ phys = <&usb0 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usbphy: usb-phy@e6590100 {
+ compatible = "renesas,usb-phy-r8a7791";
+ reg = <0 0xe6590100 0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&mstp7_clks R8A7791_CLK_HSUSB>;
+ clock-names = "usbhs";
+ status = "disabled";
+
+ usb0: usb-channel@0 {
+ reg = <0>;
+ #phy-cells = <1>;
+ };
+ usb2: usb-channel@2 {
+ reg = <2>;
+ #phy-cells = <1>;
+ };
+ };
+
vin0: video@e6ef0000 {
compatible = "renesas,vin-r8a7791";
clocks = <&mstp8_clks R8A7791_CLK_VIN0>;
status = "disabled";
};
+ vsp1@fe928000 {
+ compatible = "renesas,vsp1";
+ reg = <0 0xfe928000 0 0x8000>;
+ interrupts = <0 267 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7791_CLK_VSP1_S>;
+
+ renesas,has-lut;
+ renesas,has-sru;
+ renesas,#rpf = <5>;
+ renesas,#uds = <3>;
+ renesas,#wpf = <4>;
+ };
+
+ vsp1@fe930000 {
+ compatible = "renesas,vsp1";
+ reg = <0 0xfe930000 0 0x8000>;
+ interrupts = <0 246 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU0>;
+
+ renesas,has-lif;
+ renesas,has-lut;
+ renesas,#rpf = <4>;
+ renesas,#uds = <1>;
+ renesas,#wpf = <4>;
+ };
+
+ vsp1@fe938000 {
+ compatible = "renesas,vsp1";
+ reg = <0 0xfe938000 0 0x8000>;
+ interrupts = <0 247 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp1_clks R8A7791_CLK_VSP1_DU1>;
+
+ renesas,has-lif;
+ renesas,has-lut;
+ renesas,#rpf = <4>;
+ renesas,#uds = <1>;
+ renesas,#wpf = <4>;
+ };
+
+ du: display@feb00000 {
+ compatible = "renesas,du-r8a7791";
+ reg = <0 0xfeb00000 0 0x40000>,
+ <0 0xfeb90000 0 0x1c>;
+ reg-names = "du", "lvds.0";
+ interrupts = <0 256 IRQ_TYPE_LEVEL_HIGH>,
+ <0 268 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp7_clks R8A7791_CLK_DU0>,
+ <&mstp7_clks R8A7791_CLK_DU1>,
+ <&mstp7_clks R8A7791_CLK_LVDS0>;
+ clock-names = "du.0", "du.1", "lvds.0";
+ status = "disabled";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ du_out_rgb: endpoint {
+ };
+ };
+ port@1 {
+ reg = <1>;
+ du_out_lvds0: endpoint {
+ };
+ };
+ };
+ };
+
clocks {
#address-cells = <2>;
#size-cells = <2>;
mstp1_clks: mstp1_clks@e6150134 {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
- clocks = <&m2_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
- <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>;
+ clocks = <&zs_clk>, <&zs_clk>, <&m2_clk>, <&zs_clk>, <&p_clk>,
+ <&zg_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>,
+ <&p_clk>, <&rclk_clk>, <&cp_clk>, <&zs_clk>, <&zs_clk>,
+ <&zs_clk>;
#clock-cells = <1>;
renesas,clock-indices = <
- R8A7791_CLK_JPU R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2
- R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1
- R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_S
+ R8A7791_CLK_VCP0 R8A7791_CLK_VPC0 R8A7791_CLK_JPU
+ R8A7791_CLK_SSP1 R8A7791_CLK_TMU1 R8A7791_CLK_3DG
+ R8A7791_CLK_2DDMAC R8A7791_CLK_FDP1_1 R8A7791_CLK_FDP1_0
+ R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 R8A7791_CLK_CMT0
+ R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1 R8A7791_CLK_VSP1_DU0
+ R8A7791_CLK_VSP1_S
>;
clock-output-names =
- "jpu", "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1",
- "vsp1-du0", "vsp1-sy";
+ "vcp0", "vpc0", "jpu", "ssp1", "tmu1", "3dg",
+ "2ddmac", "fdp1-1", "fdp1-0", "tmu3", "tmu2", "cmt0",
+ "tmu0", "vsp1-du1", "vsp1-du0", "vsp1-sy";
};
mstp2_clks: mstp2_clks@e6150138 {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>;
clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, <&cpg_clocks R8A7791_CLK_SD0>,
- <&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>;
+ <&mmc0_clk>, <&hp_clk>, <&mp_clk>, <&hp_clk>, <&mp_clk>, <&rclk_clk>,
+ <&hp_clk>, <&hp_clk>;
#clock-cells = <1>;
renesas,clock-indices = <
R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 R8A7791_CLK_SDHI0
R8A7791_CLK_MMCIF0 R8A7791_CLK_IIC0 R8A7791_CLK_PCIEC R8A7791_CLK_IIC1
R8A7791_CLK_SSUSB R8A7791_CLK_CMT1
+ R8A7791_CLK_USBDMAC0 R8A7791_CLK_USBDMAC1
>;
clock-output-names =
"tpu0", "sdhi2", "sdhi1", "sdhi0",
- "mmcif0", "i2c7", "pciec", "i2c8", "ssusb", "cmt1";
+ "mmcif0", "i2c7", "pciec", "i2c8", "ssusb", "cmt1",
+ "usbdmac0", "usbdmac1";
};
mstp5_clks: mstp5_clks@e6150144 {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>;
- clocks = <&extal_clk>, <&p_clk>;
+ clocks = <&hp_clk>, <&hp_clk>, <&extal_clk>, <&p_clk>;
#clock-cells = <1>;
- renesas,clock-indices = <R8A7791_CLK_THERMAL R8A7791_CLK_PWM>;
- clock-output-names = "thermal", "pwm";
+ renesas,clock-indices = <R8A7791_CLK_AUDIO_DMAC0 R8A7791_CLK_AUDIO_DMAC1
+ R8A7791_CLK_THERMAL R8A7791_CLK_PWM>;
+ clock-output-names = "audmac0", "audmac1", "thermal", "pwm";
};
mstp7_clks: mstp7_clks@e615014c {
compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks";
status = "disabled";
};
+ xhci: usb@ee000000 {
+ compatible = "renesas,xhci-r8a7791";
+ reg = <0 0xee000000 0 0xc00>;
+ interrupts = <0 101 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&mstp3_clks R8A7791_CLK_SSUSB>;
+ phys = <&usb2 1>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
pci0: pci@ee090000 {
compatible = "renesas,pci-r8a7791";
device_type = "pci";
interrupt-map = <0x0000 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
0x0800 0 0 1 &gic 0 108 IRQ_TYPE_LEVEL_HIGH
0x1000 0 0 2 &gic 0 108 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb@0,1 {
+ reg = <0x800 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb0 0>;
+ phy-names = "usb";
+ };
+
+ usb@0,2 {
+ reg = <0x1000 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb0 0>;
+ phy-names = "usb";
+ };
};
pci1: pci@ee0d0000 {
interrupt-map = <0x0000 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
0x0800 0 0 1 &gic 0 113 IRQ_TYPE_LEVEL_HIGH
0x1000 0 0 2 &gic 0 113 IRQ_TYPE_LEVEL_HIGH>;
+
+ usb@0,1 {
+ reg = <0x800 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb2 0>;
+ phy-names = "usb";
+ };
+
+ usb@0,2 {
+ reg = <0x1000 0 0 0 0>;
+ device_type = "pci";
+ phys = <&usb2 0>;
+ phy-names = "usb";
+ };
};
pciec: pcie@fe000000 {
status = "disabled";
};
- rcar_sound: rcar_sound@0xec500000 {
+ rcar_sound: rcar_sound@ec500000 {
#sound-dai-cells = <1>;
compatible = "renesas,rcar_sound-r8a7791", "renesas,rcar_sound-gen2", "renesas,rcar_sound";
reg = <0 0xec500000 0 0x1000>, /* SCU */
};
chosen {
- bootargs = "console=ttySC0,38400 ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+ stdout-path = &scif2;
};
memory@40000000 {
status = "disabled";
};
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
irqc0: interrupt-controller@e61c0000 {
compatible = "renesas,irqc-r8a7794", "renesas,irqc";
#interrupt-cells = <2>;
mstp1_clks: mstp1_clks@e6150134 {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>;
- clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>,
- <&cp_clk>,
- <&zs_clk>, <&zs_clk>, <&zs_clk>;
+ clocks = <&zs_clk>, <&zs_clk>, <&p_clk>, <&zg_clk>, <&zs_clk>,
+ <&zs_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, <&cp_clk>,
+ <&zs_clk>, <&zs_clk>;
#clock-cells = <1>;
renesas,clock-indices = <
- R8A7794_CLK_TMU1 R8A7794_CLK_TMU3 R8A7794_CLK_TMU2
- R8A7794_CLK_CMT0 R8A7794_CLK_TMU0
+ R8A7794_CLK_VCP0 R8A7794_CLK_VPC0 R8A7794_CLK_TMU1
+ R8A7794_CLK_3DG R8A7794_CLK_2DDMAC R8A7794_CLK_FDP1_0
+ R8A7794_CLK_TMU3 R8A7794_CLK_TMU2 R8A7794_CLK_CMT0
+ R8A7794_CLK_TMU0 R8A7794_CLK_VSP1_DU0 R8A7794_CLK_VSP1_S
>;
clock-output-names =
- "tmu1", "tmu3", "tmu2", "cmt0", "tmu0";
+ "vcp0", "vpc0", "tmu1", "3dg", "2ddmac", "fdp1-0",
+ "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du0", "vsps";
};
mstp2_clks: mstp2_clks@e6150138 {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
mstp8_clks: mstp8_clks@e6150990 {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>;
- clocks = <&p_clk>;
+ clocks = <&zg_clk>, <&zg_clk>, <&p_clk>;
#clock-cells = <1>;
renesas,clock-indices = <
- R8A7794_CLK_ETHER
+ R8A7794_CLK_VIN1 R8A7794_CLK_VIN0 R8A7794_CLK_ETHER
>;
clock-output-names =
- "ether";
+ "vin1", "vin0", "ether";
};
mstp11_clks: mstp11_clks@e615099c {
compatible = "renesas,r8a7794-mstp-clocks", "renesas,cpg-mstp-clocks";
--- /dev/null
+/*
+ * Common file for the AA104XD12 panel connected to Renesas R-Car boards
+ *
+ * Copyright (C) 2014 Renesas Electronics Corp.
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+/ {
+ panel {
+ compatible = "mitsubishi,aa104xd12", "panel-dpi";
+
+ width-mm = <210>;
+ height-mm = <158>;
+
+ panel-timing {
+ /* 1024x768 @65Hz */
+ clock-frequency = <65000000>;
+ hactive = <1024>;
+ vactive = <768>;
+ hsync-len = <136>;
+ hfront-porch = <20>;
+ hback-porch = <160>;
+ vfront-porch = <3>;
+ vback-porch = <29>;
+ vsync-len = <6>;
+ };
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds_connector>;
+ };
+ };
+ };
+};
+
+&lvds_connector {
+ remote-endpoint = <&panel_in>;
+};
};
};
+&cpu0 {
+ cpu0-supply = <&vdd_arm>;
+};
+
&i2c1 {
status = "okay";
clock-frequency = <400000>;
--- /dev/null
+/*
+ * Copyright (c) 2014 Romain Perier <romain.perier@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+#include "rk3066a.dtsi"
+
+/ {
+ model = "MarsBoard RK3066";
+ compatible = "haoyu,marsboard-rk3066", "rockchip,rk3066a";
+
+ memory {
+ reg = <0x60000000 0x40000000>;
+ };
+
+ vcc_sd0: sdmmc-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "sdmmc-supply";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ gpio = <&gpio3 7 GPIO_ACTIVE_LOW>;
+ startup-delay-us = <100000>;
+ vin-supply = <&vcc_io>;
+ };
+
+ vsys: vsys-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vsys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
+ };
+};
+
+&i2c1 {
+ status = "okay";
+ clock-frequency = <400000>;
+
+ tps: tps@2d {
+ reg = <0x2d>;
+
+ interrupt-parent = <&gpio6>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
+
+ vcc1-supply = <&vsys>;
+ vcc2-supply = <&vsys>;
+ vcc3-supply = <&vsys>;
+ vcc4-supply = <&vsys>;
+ vcc5-supply = <&vcc_io>;
+ vcc6-supply = <&vcc_io>;
+ vcc7-supply = <&vsys>;
+ vccio-supply = <&vsys>;
+
+ regulators {
+ vcc_rtc: regulator@0 {
+ regulator-name = "vcc_rtc";
+ regulator-always-on;
+ };
+
+ vcc_io: regulator@1 {
+ regulator-name = "vcc_io";
+ regulator-always-on;
+ };
+
+ vdd_arm: regulator@2 {
+ regulator-name = "vdd_arm";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc_ddr: regulator@3 {
+ regulator-name = "vcc_ddr";
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vcc18_cif: regulator@5 {
+ regulator-name = "vcc18_cif";
+ regulator-always-on;
+ };
+
+ vdd_11: regulator@6 {
+ regulator-name = "vdd_11";
+ regulator-always-on;
+ };
+
+ vcc_25: regulator@7 {
+ regulator-name = "vcc_25";
+ regulator-always-on;
+ };
+
+ vcc_18: regulator@8 {
+ regulator-name = "vcc_18";
+ regulator-always-on;
+ };
+
+ vcc25_hdmi: regulator@9 {
+ regulator-name = "vcc25_hdmi";
+ regulator-always-on;
+ };
+
+ vcca_33: regulator@10 {
+ regulator-name = "vcca_33";
+ regulator-always-on;
+ };
+
+ vcc_rmii: regulator@11 {
+ regulator-name = "vcc_rmii";
+ };
+
+ vcc28_cif: regulator@12 {
+ regulator-name = "vcc28_cif";
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+/* must be included after &tps gets defined */
+#include "tps65910.dtsi"
+
+&emac {
+ status = "okay";
+
+ phy = <&phy0>;
+ phy-supply = <&vcc_rmii>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_xfer>, <&emac_mdio>, <&phy_int>;
+
+ phy0: ethernet-phy@0 {
+ reg = <0>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&pinctrl {
+ lan8720a {
+ phy_int: phy-int {
+ rockchip,pins = <RK_GPIO1 26 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&uart3 {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
#size-cells = <0>;
enable-method = "rockchip,rk3066-smp";
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
reg = <0x0>;
+ operating-points = <
+ /* kHz uV */
+ 1008000 1075000
+ 816000 1025000
+ 600000 1025000
+ 504000 1000000
+ 312000 975000
+ >;
+ clock-latency = <40000>;
+ clocks = <&cru ARMCLK>;
};
cpu@1 {
device_type = "cpu";
};
};
+ i2s0: i2s@10118000 {
+ compatible = "rockchip,rk3066-i2s";
+ reg = <0x10118000 0x2000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_bus>;
+ dmas = <&dmac1_s 4>, <&dmac1_s 5>;
+ dma-names = "tx", "rx";
+ clock-names = "i2s_hclk", "i2s_clk";
+ clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+ status = "disabled";
+ };
+
+ i2s1: i2s@1011a000 {
+ compatible = "rockchip,rk3066-i2s";
+ reg = <0x1011a000 0x2000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s1_bus>;
+ dmas = <&dmac1_s 6>, <&dmac1_s 7>;
+ dma-names = "tx", "rx";
+ clock-names = "i2s_hclk", "i2s_clk";
+ clocks = <&cru HCLK_I2S1>, <&cru SCLK_I2S1>;
+ status = "disabled";
+ };
+
+ i2s2: i2s@1011c000 {
+ compatible = "rockchip,rk3066-i2s";
+ reg = <0x1011c000 0x2000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s2_bus>;
+ dmas = <&dmac1_s 9>, <&dmac1_s 10>;
+ dma-names = "tx", "rx";
+ clock-names = "i2s_hclk", "i2s_clk";
+ clocks = <&cru HCLK_I2S2>, <&cru SCLK_I2S2>;
+ status = "disabled";
+ };
+
cru: clock-controller@20000000 {
compatible = "rockchip,rk3066a-cru";
reg = <0x20000000 0x1000>;
bias-disable;
};
+ emac {
+ emac_xfer: emac-xfer {
+ rockchip,pins = <RK_GPIO1 16 RK_FUNC_2 &pcfg_pull_none>, /* mac_clk */
+ <RK_GPIO1 17 RK_FUNC_2 &pcfg_pull_none>, /* tx_en */
+ <RK_GPIO1 18 RK_FUNC_2 &pcfg_pull_none>, /* txd1 */
+ <RK_GPIO1 19 RK_FUNC_2 &pcfg_pull_none>, /* txd0 */
+ <RK_GPIO1 20 RK_FUNC_2 &pcfg_pull_none>, /* rx_err */
+ <RK_GPIO1 21 RK_FUNC_2 &pcfg_pull_none>, /* crs_dvalid */
+ <RK_GPIO1 22 RK_FUNC_2 &pcfg_pull_none>, /* rxd1 */
+ <RK_GPIO1 23 RK_FUNC_2 &pcfg_pull_none>; /* rxd0 */
+ };
+
+ emac_mdio: emac-mdio {
+ rockchip,pins = <RK_GPIO1 24 RK_FUNC_2 &pcfg_pull_none>, /* mac_md */
+ <RK_GPIO1 25 RK_FUNC_2 &pcfg_pull_none>; /* mac_mdclk */
+ };
+ };
+
emmc {
emmc_clk: emmc-clk {
rockchip,pins = <RK_GPIO3 31 RK_FUNC_2 &pcfg_pull_default>;
<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_default>;
};
};
+
+ i2s0 {
+ i2s0_bus: i2s0-bus {
+ rockchip,pins = <RK_GPIO0 7 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 8 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 9 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 10 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 11 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 12 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 13 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 14 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 15 RK_FUNC_1 &pcfg_pull_default>;
+ };
+ };
+
+ i2s1 {
+ i2s1_bus: i2s1-bus {
+ rockchip,pins = <RK_GPIO0 16 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 17 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 18 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 19 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 20 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 21 RK_FUNC_1 &pcfg_pull_default>;
+ };
+ };
+
+ i2s2 {
+ i2s2_bus: i2s2-bus {
+ rockchip,pins = <RK_GPIO0 24 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 25 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 26 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 27 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 28 RK_FUNC_1 &pcfg_pull_default>,
+ <RK_GPIO0 29 RK_FUNC_1 &pcfg_pull_default>;
+ };
+ };
};
};
&wdt {
compatible = "rockchip,rk3066-wdt", "snps,dw-wdt";
};
+
+&emac {
+ compatible = "rockchip,rk3066-emac";
+};
compatible = "gpio-leds";
green {
+ label = "rock:green:user1";
gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
default-state = "off";
};
- yellow {
+ blue {
+ label = "rock:blue:user2";
gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
default-state = "off";
};
sleep {
+ label = "rock:red:power";
gpios = <&gpio0 15 0>;
default-state = "off";
};
};
};
+&cpu0 {
+ cpu0-supply = <&vdd_arm>;
+};
+
&i2c1 {
status = "okay";
clock-frequency = <400000>;
vdd_arm: REG3 {
regulator-name = "VDD_ARM";
regulator-min-microvolt = <875000>;
- regulator-max-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
regulator-always-on;
};
disable-wp;
};
+&pwm1 {
+ status = "okay";
+};
+
+&pwm2 {
+ status = "okay";
+};
+
+&pwm3 {
+ status = "okay";
+};
+
&pinctrl {
pcfg_output_low: pcfg-output-low {
output-low;
#size-cells = <0>;
enable-method = "rockchip,rk3066-smp";
- cpu@0 {
+ cpu0: cpu@0 {
device_type = "cpu";
compatible = "arm,cortex-a9";
next-level-cache = <&L2>;
reg = <0x0>;
+ operating-points = <
+ /* kHz uV */
+ 1608000 1350000
+ 1416000 1250000
+ 1200000 1150000
+ 1008000 1075000
+ 816000 975000
+ 600000 950000
+ 504000 925000
+ 312000 875000
+ >;
+ clock-latency = <40000>;
+ clocks = <&cru ARMCLK>;
};
cpu@1 {
device_type = "cpu";
};
};
+ i2s0: i2s@1011a000 {
+ compatible = "rockchip,rk3188-i2s", "rockchip,rk3066-i2s";
+ reg = <0x1011a000 0x2000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2s0_bus>;
+ dmas = <&dmac1_s 6>, <&dmac1_s 7>;
+ dma-names = "tx", "rx";
+ clock-names = "i2s_hclk", "i2s_clk";
+ clocks = <&cru HCLK_I2S0>, <&cru SCLK_I2S0>;
+ status = "disabled";
+ };
+
cru: clock-controller@20000000 {
compatible = "rockchip,rk3188-cru";
reg = <0x20000000 0x1000>;
#size-cells = <1>;
ranges;
- gpio0: gpio0@0x2000a000 {
+ gpio0: gpio0@2000a000 {
compatible = "rockchip,rk3188-gpio-bank0";
reg = <0x2000a000 0x100>;
interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
#interrupt-cells = <2>;
};
- gpio1: gpio1@0x2003c000 {
+ gpio1: gpio1@2003c000 {
compatible = "rockchip,gpio-bank";
reg = <0x2003c000 0x100>;
interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
<RK_GPIO3 20 RK_FUNC_1 &pcfg_pull_none>;
};
};
+
+ i2s0 {
+ i2s0_bus: i2s0-bus {
+ rockchip,pins = <RK_GPIO1 16 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO1 17 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO1 18 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO1 19 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO1 20 RK_FUNC_1 &pcfg_pull_none>,
+ <RK_GPIO1 21 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
};
};
compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288";
};
+&cpu0 {
+ cpu0-supply = <&vdd_cpu>;
+};
+
&i2c0 {
clock-frequency = <400000>;
status = "okay";
regulator-always-on;
regulator-boot-on;
regulator-min-microvolt = <750000>;
- regulator-max-microvolt = <1300000>;
+ regulator-max-microvolt = <1350000>;
regulator-name = "vdd_arm";
};
status = "okay";
};
+&tsadc {
+ rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+ rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+ status = "okay";
+};
+
&pinctrl {
backlight {
bl_en: bl-en {
--- /dev/null
+/*
+ * Device Tree Source for RK3288 SoC thermal
+ *
+ * Copyright (c) 2014, Fuzhou Rockchip Electronics Co., Ltd
+ *
+ * This file is licensed under the terms of the GNU General Public License
+ * version 2. This program is licensed "as is" without any warranty of any
+ * kind, whether express or implied.
+ */
+
+#include <dt-bindings/thermal/thermal.h>
+
+reserve_thermal: reserve_thermal {
+ polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay = <5000>; /* milliseconds */
+
+ thermal-sensors = <&tsadc 0>;
+};
+
+cpu_thermal: cpu_thermal {
+ polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay = <5000>; /* milliseconds */
+
+ thermal-sensors = <&tsadc 1>;
+
+ trips {
+ cpu_alert0: cpu_alert0 {
+ temperature = <70000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ cpu_crit: cpu_crit {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&cpu_alert0>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+};
+
+gpu_thermal: gpu_thermal {
+ polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay = <5000>; /* milliseconds */
+
+ thermal-sensors = <&tsadc 2>;
+
+ trips {
+ gpu_alert0: gpu_alert0 {
+ temperature = <70000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "passive";
+ };
+ gpu_crit: gpu_crit {
+ temperature = <90000>; /* millicelsius */
+ hysteresis = <2000>; /* millicelsius */
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&gpu_alert0>;
+ cooling-device =
+ <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+ };
+ };
+};
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/pinctrl/rockchip.h>
#include <dt-bindings/clock/rk3288-cru.h>
+#include <dt-bindings/thermal/thermal.h>
#include "skeleton.dtsi"
/ {
cpus {
#address-cells = <1>;
#size-cells = <0>;
+ enable-method = "rockchip,rk3066-smp";
+ rockchip,pmu = <&pmu>;
- cpu@500 {
+ cpu0: cpu@500 {
device_type = "cpu";
compatible = "arm,cortex-a12";
reg = <0x500>;
+ resets = <&cru SRST_CORE0>;
+ operating-points = <
+ /* KHz uV */
+ 1608000 1350000
+ 1512000 1300000
+ 1416000 1200000
+ 1200000 1100000
+ 1008000 1050000
+ 816000 1000000
+ 696000 950000
+ 600000 900000
+ 408000 900000
+ 312000 900000
+ 216000 900000
+ 126000 900000
+ >;
+ #cooling-cells = <2>; /* min followed by max */
+ clock-latency = <40000>;
+ clocks = <&cru ARMCLK>;
};
cpu@501 {
device_type = "cpu";
compatible = "arm,cortex-a12";
reg = <0x501>;
+ resets = <&cru SRST_CORE1>;
};
cpu@502 {
device_type = "cpu";
compatible = "arm,cortex-a12";
reg = <0x502>;
+ resets = <&cru SRST_CORE2>;
};
cpu@503 {
device_type = "cpu";
compatible = "arm,cortex-a12";
reg = <0x503>;
+ resets = <&cru SRST_CORE3>;
};
};
timer {
compatible = "arm,armv7-timer";
+ arm,cpu-registers-not-fw-configured;
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi";
clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
clock-names = "spiclk", "apb_pclk";
+ dmas = <&dmac_peri 11>, <&dmac_peri 12>;
+ dma-names = "tx", "rx";
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&spi0_clk &spi0_tx &spi0_rx &spi0_cs0>;
compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi";
clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
clock-names = "spiclk", "apb_pclk";
+ dmas = <&dmac_peri 13>, <&dmac_peri 14>;
+ dma-names = "tx", "rx";
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&spi1_clk &spi1_tx &spi1_rx &spi1_cs0>;
compatible = "rockchip,rk3288-spi", "rockchip,rk3066-spi";
clocks = <&cru SCLK_SPI2>, <&cru PCLK_SPI2>;
clock-names = "spiclk", "apb_pclk";
+ dmas = <&dmac_peri 15>, <&dmac_peri 16>;
+ dma-names = "tx", "rx";
interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&spi2_clk &spi2_tx &spi2_rx &spi2_cs0>;
status = "disabled";
};
+ thermal-zones {
+ #include "rk3288-thermal.dtsi"
+ };
+
+ tsadc: tsadc@ff280000 {
+ compatible = "rockchip,rk3288-tsadc";
+ reg = <0xff280000 0x100>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_TSADC>, <&cru PCLK_TSADC>;
+ clock-names = "tsadc", "apb_pclk";
+ resets = <&cru SRST_TSADC>;
+ reset-names = "tsadc-apb";
+ pinctrl-names = "default";
+ pinctrl-0 = <&otp_out>;
+ #thermal-sensor-cells = <1>;
+ rockchip,hw-tshut-temp = <95000>;
+ status = "disabled";
+ };
+
usb_host0_ehci: usb@ff500000 {
compatible = "generic-ehci";
reg = <0xff500000 0x100>;
status = "disabled";
};
+ bus_intmem@ff700000 {
+ compatible = "mmio-sram";
+ reg = <0xff700000 0x18000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0xff700000 0x18000>;
+ smp-sram@0 {
+ compatible = "rockchip,rk3066-smp-sram";
+ reg = <0x00 0x10>;
+ };
+ };
+
pmu: power-management@ff730000 {
compatible = "rockchip,rk3288-pmu", "syscon";
reg = <0xff730000 0x100>;
rockchip,grf = <&grf>;
#clock-cells = <1>;
#reset-cells = <1>;
+ assigned-clocks = <&cru PLL_GPLL>, <&cru PLL_CPLL>,
+ <&cru PLL_NPLL>, <&cru ACLK_CPU>,
+ <&cru HCLK_CPU>, <&cru PCLK_CPU>,
+ <&cru ACLK_PERI>, <&cru HCLK_PERI>,
+ <&cru PCLK_PERI>;
+ assigned-clock-rates = <594000000>, <400000000>,
+ <500000000>, <300000000>,
+ <150000000>, <75000000>,
+ <300000000>, <150000000>,
+ <75000000>;
};
grf: syscon@ff770000 {
status = "disabled";
};
+ vopb_mmu: iommu@ff930300 {
+ compatible = "rockchip,iommu";
+ reg = <0xff930300 0x100>;
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vopb_mmu";
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
+ vopl_mmu: iommu@ff940300 {
+ compatible = "rockchip,iommu";
+ reg = <0xff940300 0x100>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "vopl_mmu";
+ #iommu-cells = <0>;
+ status = "disabled";
+ };
+
gic: interrupt-controller@ffc01000 {
compatible = "arm,gic-400";
interrupt-controller;
};
};
+ tsadc {
+ otp_out: otp-out {
+ rockchip,pins = <0 10 RK_FUNC_1 &pcfg_pull_none>;
+ };
+ };
+
pwm0 {
pwm0_pin: pwm0-pin {
rockchip,pins = <7 0 RK_FUNC_1 &pcfg_pull_none>;
mshc0 = &emmc;
mshc1 = &mmc0;
mshc2 = &mmc1;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
spi0 = &spi0;
spi1 = &spi1;
};
compatible = "rockchip,rk2928-dw-mshc";
reg = <0x10214000 0x1000>;
interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
-
clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
clock-names = "biu", "ciu";
-
+ fifo-depth = <256>;
status = "disabled";
};
compatible = "rockchip,rk2928-dw-mshc";
reg = <0x10218000 0x1000>;
interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-
clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>;
clock-names = "biu", "ciu";
-
+ fifo-depth = <256>;
status = "disabled";
};
compatible = "rockchip,rk2928-dw-mshc";
reg = <0x1021c000 0x1000>;
interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
-
clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
clock-names = "biu", "ciu";
-
+ fifo-depth = <256>;
status = "disabled";
};
reg = <0x20070000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&dmac2 10>, <&dmac2 11>;
+ dma-names = "tx", "rx";
status = "disabled";
};
reg = <0x20074000 0x1000>;
#address-cells = <1>;
#size-cells = <0>;
+ dmas = <&dmac2 12>, <&dmac2 13>;
+ dma-names = "tx", "rx";
status = "disabled";
};
};
status = "okay";
};
-&pwm {
- status = "okay";
-};
-
&pinctrl0 {
gpio_leds: gpio-leds {
samsung,pins = "gpk-4", "gpk-5", "gpk-6", "gpk-7";
clocks = <&clocks PCLK_PWM>;
samsung,pwm-outputs = <0>, <1>;
#pwm-cells = <3>;
- status = "disabled";
};
pinctrl0: pinctrl@7f008000 {
#include "sama5d3_uart.dtsi"
/ {
- compatible = "atmel,samad31", "atmel,sama5d3", "atmel,sama5";
+ compatible = "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
};
#include "sama5d3_gmac.dtsi"
/ {
- compatible = "atmel,samad33", "atmel,sama5d3", "atmel,sama5";
+ compatible = "atmel,sama5d33", "atmel,sama5d3", "atmel,sama5";
};
#include "sama5d3_mci2.dtsi"
/ {
- compatible = "atmel,samad34", "atmel,sama5d3", "atmel,sama5";
+ compatible = "atmel,sama5d34", "atmel,sama5d3", "atmel,sama5";
};
#include "sama5d3_tcb1.dtsi"
/ {
- compatible = "atmel,samad35", "atmel,sama5d3", "atmel,sama5";
+ compatible = "atmel,sama5d35", "atmel,sama5d3", "atmel,sama5";
};
#include "sama5d3_uart.dtsi"
/ {
- compatible = "atmel,samad36", "atmel,sama5d3", "atmel,sama5";
+ compatible = "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
};
*/
/ {
- compatible = "atmel,samad3xcm", "atmel,sama5d3", "atmel,sama5";
+ compatible = "atmel,sama5d3xcm", "atmel,sama5d3", "atmel,sama5";
chosen {
bootargs = "console=ttyS0,115200 rootfstype=ubifs ubi.mtd=5 root=ubi0:rootfs";
chosen {
bootargs = "console=tty0 console=ttySC4,115200 root=/dev/nfs ip=dhcp ignore_loglevel rw";
+ stdout-path = &scifa4;
};
memory {
compatible = "gpio-leds";
led1 {
gpios = <&pfc 20 GPIO_ACTIVE_LOW>;
+ label = "LED1";
};
led2 {
gpios = <&pfc 21 GPIO_ACTIVE_LOW>;
+ label = "LED2";
};
led3 {
gpios = <&pfc 22 GPIO_ACTIVE_LOW>;
+ label = "LED3";
};
led4 {
gpios = <&pfc 23 GPIO_ACTIVE_LOW>;
+ label = "LED4";
};
};
- gpio-keys {
+ keyboard {
compatible = "gpio-keys";
back-key {
};
};
- ak4648: ak4648@0x12 {
+ ak4648: ak4648@12 {
#sound-dai-cells = <0>;
compatible = "asahi-kasei,ak4648";
reg = <0x12>;
i2c0: i2c@e6820000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,rmobile-iic";
+ compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
reg = <0xe6820000 0x425>;
interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH
0 168 IRQ_TYPE_LEVEL_HIGH
i2c1: i2c@e6822000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,rmobile-iic";
+ compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
reg = <0xe6822000 0x425>;
interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH
0 52 IRQ_TYPE_LEVEL_HIGH
i2c2: i2c@e6824000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,rmobile-iic";
+ compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
reg = <0xe6824000 0x425>;
interrupts = <0 171 IRQ_TYPE_LEVEL_HIGH
0 172 IRQ_TYPE_LEVEL_HIGH
i2c3: i2c@e6826000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,rmobile-iic";
+ compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
reg = <0xe6826000 0x425>;
interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH
0 184 IRQ_TYPE_LEVEL_HIGH
i2c4: i2c@e6828000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,rmobile-iic";
+ compatible = "renesas,iic-sh73a0", "renesas,rmobile-iic";
reg = <0xe6828000 0x425>;
interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH
0 188 IRQ_TYPE_LEVEL_HIGH
status = "disabled";
};
- gpio@ff708000 {
+ gpio0: gpio@ff708000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
clocks = <&per_base_clk>;
status = "disabled";
- gpio0: gpio-controller@0 {
+ porta: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
};
};
- gpio@ff709000 {
+ gpio1: gpio@ff709000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
clocks = <&per_base_clk>;
status = "disabled";
- gpio1: gpio-controller@0 {
+ portb: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
};
};
- gpio@ff70a000 {
+ gpio2: gpio@ff70a000 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "snps,dw-apb-gpio";
clocks = <&per_base_clk>;
status = "disabled";
- gpio2: gpio-controller@0 {
+ portc: gpio-controller@0 {
compatible = "snps,dw-apb-gpio-port";
gpio-controller;
#gpio-cells = <2>;
clock-names = "biu", "ciu";
};
+ ocram: sram@ffff0000 {
+ compatible = "mmio-sram";
+ reg = <0xffff0000 0x10000>;
+ };
+
+ spi0: spi@fff00000 {
+ compatible = "snps,dw-apb-ssi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfff00000 0x1000>;
+ interrupts = <0 154 4>;
+ num-cs = <4>;
+ clocks = <&spi_m_clk>;
+ status = "disabled";
+ };
+
+ spi1: spi@fff01000 {
+ compatible = "snps,dw-apb-ssi";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfff01000 0x1000>;
+ interrupts = <0 156 4>;
+ num-cs = <4>;
+ clocks = <&spi_m_clk>;
+ status = "disabled";
+ };
+
/* Local timer */
timer@fffec600 {
compatible = "arm,cortex-a9-twd-timer";
--- /dev/null
+/*
+ * Copyright Altera Corporation (C) 2014. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "skeleton.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ aliases {
+ ethernet0 = &gmac0;
+ ethernet1 = &gmac1;
+ ethernet2 = &gmac2;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ timer0 = &timer0;
+ timer1 = &timer1;
+ timer2 = &timer2;
+ timer3 = &timer3;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <0>;
+ next-level-cache = <&L2>;
+ };
+ cpu@1 {
+ compatible = "arm,cortex-a9";
+ device_type = "cpu";
+ reg = <1>;
+ next-level-cache = <&L2>;
+ };
+ };
+
+ intc: intc@ffffd000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0xffffd000 0x1000>,
+ <0xffffc100 0x100>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ device_type = "soc";
+ interrupt-parent = <&intc>;
+ ranges;
+
+ amba {
+ compatible = "arm,amba-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ pdma: pdma@ffda1000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0xffda1000 0x1000>;
+ interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>,
+ <0 84 IRQ_TYPE_LEVEL_HIGH>,
+ <0 85 IRQ_TYPE_LEVEL_HIGH>,
+ <0 86 IRQ_TYPE_LEVEL_HIGH>,
+ <0 87 IRQ_TYPE_LEVEL_HIGH>,
+ <0 88 IRQ_TYPE_LEVEL_HIGH>,
+ <0 89 IRQ_TYPE_LEVEL_HIGH>,
+ <0 90 IRQ_TYPE_LEVEL_HIGH>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ };
+ };
+
+ clkmgr@ffd04000 {
+ compatible = "altr,clk-mgr";
+ reg = <0xffd04000 0x1000>;
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ osc1: osc1 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ };
+
+ main_pll: main_pll {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-pll-clock";
+ clocks = <&osc1>;
+ };
+
+ periph_pll: periph_pll {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ #clock-cells = <0>;
+ compatible = "altr,socfpga-pll-clock";
+ clocks = <&osc1>;
+ };
+ };
+ };
+
+ gmac0: ethernet@ff800000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+ reg = <0xff800000 0x2000>;
+ interrupts = <0 92 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ /* Filled in by bootloader */
+ mac-address = [00 00 00 00 00 00];
+ status = "disabled";
+ };
+
+ gmac1: ethernet@ff802000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+ reg = <0xff802000 0x2000>;
+ interrupts = <0 93 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ /* Filled in by bootloader */
+ mac-address = [00 00 00 00 00 00];
+ status = "disabled";
+ };
+
+ gmac2: ethernet@ff804000 {
+ compatible = "altr,socfpga-stmmac", "snps,dwmac-3.72a", "snps,dwmac";
+ reg = <0xff804000 0x2000>;
+ interrupts = <0 94 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ /* Filled in by bootloader */
+ mac-address = [00 00 00 00 00 00];
+ status = "disabled";
+ };
+
+ gpio0: gpio@ffc02900 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xffc02900 0x100>;
+ status = "disabled";
+
+ porta: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <29>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 112 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio1: gpio@ffc02a00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xffc02a00 0x100>;
+ status = "disabled";
+
+ portb: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <29>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 113 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ gpio2: gpio@ffc02b00 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dw-apb-gpio";
+ reg = <0xffc02b00 0x100>;
+ status = "disabled";
+
+ portc: gpio-controller@0 {
+ compatible = "snps,dw-apb-gpio-port";
+ gpio-controller;
+ #gpio-cells = <2>;
+ snps,nr-gpios = <27>;
+ reg = <0>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <0 114 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
+
+ i2c0: i2c@ffc02200 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02200 0x100>;
+ interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@ffc02300 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02300 0x100>;
+ interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@ffc02400 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02400 0x100>;
+ interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c3: i2c@ffc02500 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02500 0x100>;
+ interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ i2c4: i2c@ffc02600 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,designware-i2c";
+ reg = <0xffc02600 0x100>;
+ interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ L2: l2-cache@fffff000 {
+ compatible = "arm,pl310-cache";
+ reg = <0xfffff000 0x1000>;
+ interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ mmc: dwmmc0@ff808000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "altr,socfpga-dw-mshc";
+ reg = <0xff808000 0x1000>;
+ interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>;
+ fifo-depth = <0x400>;
+ };
+
+ ocram: sram@ffe00000 {
+ compatible = "mmio-sram";
+ reg = <0xffe00000 0x40000>;
+ };
+
+ rst: rstmgr@ffd05000 {
+ #reset-cells = <1>;
+ compatible = "altr,rst-mgr";
+ reg = <0xffd05000 0x100>;
+ };
+
+ sysmgr: sysmgr@ffd06000 {
+ compatible = "altr,sys-mgr", "syscon";
+ reg = <0xffd06000 0x300>;
+ };
+
+ /* Local timer */
+ timer@ffffc600 {
+ compatible = "arm,cortex-a9-twd-timer";
+ reg = <0xffffc600 0x100>;
+ interrupts = <1 13 0xf04>;
+ };
+
+ timer0: timer0@ffc02700 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 115 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xffc02700 0x100>;
+ };
+
+ timer1: timer1@ffc02800 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 116 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xffc02800 0x100>;
+ };
+
+ timer2: timer2@ffd00000 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xffd00000 0x100>;
+ };
+
+ timer3: timer3@ffd00100 {
+ compatible = "snps,dw-apb-timer";
+ interrupts = <0 118 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0xffd01000 0x100>;
+ };
+
+ uart0: serial0@ffc02000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xffc02000 0x100>;
+ interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+ uart1: serial1@ffc02100 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0xffc02100 0x100>;
+ interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ };
+
+ usbphy0: usbphy@0 {
+ #phy-cells = <0>;
+ compatible = "usb-nop-xceiv";
+ status = "okay";
+ };
+
+ usb0: usb@ffb00000 {
+ compatible = "snps,dwc2";
+ reg = <0xffb00000 0xffff>;
+ interrupts = <0 95 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usbphy0>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ usb1: usb@ffb40000 {
+ compatible = "snps,dwc2";
+ reg = <0xffb40000 0xffff>;
+ interrupts = <0 96 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&usbphy0>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ watchdog0: watchdog@ffd00200 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd00200 0x100>;
+ interrupts = <0 119 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ watchdog1: watchdog@ffd00300 {
+ compatible = "snps,dw-wdt";
+ reg = <0xffd00300 0x100>;
+ interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2014 Altera Corporation <www.altera.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/dts-v1/;
+#include "socfpga_arria10.dtsi"
+
+/ {
+ model = "Altera SOCFPGA Arria 10";
+ compatible = "altr,socfpga-arria10", "altr,socfpga";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 rootwait";
+ };
+
+ memory {
+ name = "memory";
+ device_type = "memory";
+ reg = <0x0 0x40000000>; /* 1GB */
+ };
+
+ soc {
+ clkmgr@ffd04000 {
+ clocks {
+ osc1 {
+ clock-frequency = <25000000>;
+ };
+ };
+ };
+
+ serial0@ffc02000 {
+ status = "okay";
+ };
+ };
+};
};
};
- dwmmc0@ff704000 {
+ mmc0: dwmmc0@ff704000 {
num-slots = <1>;
broken-cd;
bus-width = <4>;
*/
ethernet0 = &gmac1;
};
+
+ regulator_3_3v: 3-3-v-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
};
&gmac1 {
};
};
+&mmc0 {
+ vmmc-supply = <®ulator_3_3v>;
+ vqmmc-supply = <®ulator_3_3v>;
+};
+
&usb1 {
status = "okay";
};
};
};
};
+
+&watchdog0 {
+ status = "okay";
+};
*/
ethernet0 = &gmac1;
};
+
+ regulator_3_3v: 3-3-v-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "3.3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
};
&gmac1 {
rxc-skew-ps = <2000>;
};
+&gpio1 {
+ status = "okay";
+};
+
&i2c0 {
status = "okay";
};
&mmc0 {
- cd-gpios = <&gpio1 18 0>;
+ cd-gpios = <&portb 18 0>;
+ vmmc-supply = <®ulator_3_3v>;
+ vqmmc-supply = <®ulator_3_3v>;
};
&usb1 {
*/
ethernet0 = &gmac1;
};
+
+ regulator_3_3v: vcc3p3-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3P3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
};
&gmac1 {
rxc-skew-ps = <2000>;
};
+&mmc0 {
+ vmmc-supply = <®ulator_3_3v>;
+ vqmmc-supply = <®ulator_3_3v>;
+};
+
&usb1 {
status = "okay";
};
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/mfd/dbx500-prcmu.h>
+#include <dt-bindings/arm/ux500_pm_domains.h>
#include "skeleton.dtsi"
/ {
interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>;
};
+ pm_domains: pm_domains0 {
+ compatible = "stericsson,ux500-pm-domains";
+ #power-domain-cells = <1>;
+ };
clocks {
compatible = "stericsson,u8500-clks";
clock-frequency = <400000>;
clocks = <&prcc_kclk 3 3>, <&prcc_pclk 3 3>;
clock-names = "i2cclk", "apb_pclk";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
};
i2c@80122000 {
clocks = <&prcc_kclk 1 2>, <&prcc_pclk 1 2>;
clock-names = "i2cclk", "apb_pclk";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
};
i2c@80128000 {
clocks = <&prcc_kclk 1 6>, <&prcc_pclk 1 6>;
clock-names = "i2cclk", "apb_pclk";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
};
i2c@80110000 {
clocks = <&prcc_kclk 2 0>, <&prcc_pclk 2 0>;
clock-names = "i2cclk", "apb_pclk";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
};
i2c@8012a000 {
clocks = <&prcc_kclk 1 9>, <&prcc_pclk 1 10>;
clock-names = "i2cclk", "apb_pclk";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
};
ssp@80002000 {
dmas = <&dma 8 0 0x2>, /* Logical - DevToMem */
<&dma 8 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
};
ssp@80003000 {
dmas = <&dma 9 0 0x2>, /* Logical - DevToMem */
<&dma 9 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
};
spi@8011a000 {
dmas = <&dma 0 0 0x2>, /* Logical - DevToMem */
<&dma 0 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
};
spi@80112000 {
dmas = <&dma 35 0 0x2>, /* Logical - DevToMem */
<&dma 35 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
};
spi@80111000 {
dmas = <&dma 33 0 0x2>, /* Logical - DevToMem */
<&dma 33 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
};
spi@80129000 {
dmas = <&dma 40 0 0x2>, /* Logical - DevToMem */
<&dma 40 0 0x0>; /* Logical - MemToDev */
dma-names = "rx", "tx";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
};
uart@80120000 {
clocks = <&prcc_kclk 1 5>, <&prcc_pclk 1 5>;
clock-names = "sdi", "apb_pclk";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
status = "disabled";
};
clocks = <&prcc_kclk 2 4>, <&prcc_pclk 2 6>;
clock-names = "sdi", "apb_pclk";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
status = "disabled";
};
clocks = <&prcc_kclk 3 4>, <&prcc_pclk 3 4>;
clock-names = "sdi", "apb_pclk";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
status = "disabled";
};
clocks = <&prcc_kclk 2 5>, <&prcc_pclk 2 7>;
clock-names = "sdi", "apb_pclk";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
status = "disabled";
};
clocks = <&prcc_kclk 2 2>, <&prcc_pclk 2 4>;
clock-names = "sdi", "apb_pclk";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
status = "disabled";
};
clocks = <&prcc_kclk 3 7>, <&prcc_pclk 3 7>;
clock-names = "sdi", "apb_pclk";
+ power-domains = <&pm_domains DOMAIN_VAPE>;
status = "disabled";
};
--- /dev/null
+/*
+ * Device Tree for the ST-Ericsson Nomadik S8815 board
+ * Produced by Calao Systems
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+#include "ste-nomadik-stn8815.dtsi"
+
+/ {
+ model = "Nomadik STN8815NHK";
+ compatible = "st,nomadik-nhk-15";
+
+ chosen {
+ bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
+ };
+
+ aliases {
+ stmpe-i2c0 = &stmpe0;
+ stmpe-i2c1 = &stmpe1;
+ };
+
+ pinctrl {
+ stmpe2401_1 {
+ stmpe2401_1_nhk_mode: stmpe2401_1_nhk {
+ nhk_cfg1 {
+ ste,pins = "GPIO76_B20"; // IRQ line
+ ste,input = <0>;
+ };
+ nhk_cfg2 {
+ ste,pins = "GPIO77_B8"; // reset line
+ ste,output = <1>;
+ };
+ };
+ };
+ stmpe2401_2 {
+ stmpe2401_2_nhk_mode: stmpe2401_2_nhk {
+ nhk_cfg1 {
+ ste,pins = "GPIO78_A8"; // IRQ line
+ ste,input = <0>;
+ };
+ nhk_cfg2 {
+ ste,pins = "GPIO79_C9"; // reset line
+ ste,output = <1>;
+ };
+ };
+ };
+ };
+
+ src@101e0000 {
+ /* These chrystal outputs are not used on this board */
+ disable-sxtalo;
+ disable-mxtalo;
+ };
+
+ /* This is where the interrupt is routed on the NHK-15 debug board */
+ external-bus@34000000 {
+ compatible = "simple-bus";
+ reg = <0x34000000 0x1000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x34000000 0x1000000>;
+ ethernet@300 {
+ compatible = "smsc,lan91c111";
+ reg = <0x300 0x0fd00>;
+ reg-io-width = <2>;
+ reset-gpios = <&stmpe_gpio44 10 GPIO_ACTIVE_HIGH>;
+ interrupt-parent = <&stmpe_gpio44>;
+ interrupts = <11 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
+ i2c0 {
+ stmpe0: stmpe2401@43 {
+ compatible = "st,stmpe2401";
+ reg = <0x43>;
+ reset-gpios = <&gpio2 13 GPIO_ACTIVE_LOW>; // GPIO77
+ interrupts = <12 IRQ_TYPE_EDGE_FALLING>; // GPIO76
+ interrupt-parent = <&gpio2>;
+ interrupt-controller;
+ wakeup-source;
+ pinctrl-names = "default";
+ pinctrl-0 = <&stmpe2401_1_nhk_mode>;
+ stmpe_gpio43: stmpe_gpio {
+ compatible = "st,stmpe-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ /* Some pins in alternate functions */
+ st,norequest-mask = <0xf0f002>;
+ };
+ stmpe_keypad {
+ compatible = "st,stmpe-keypad";
+ debounce-interval = <64>;
+ st,scan-count = <8>;
+ st,no-autorepeat;
+ keypad,num-rows = <8>;
+ keypad,num-columns = <8>;
+ linux,keymap = <0x00020072 // Vol down
+ 0x00030073 // Vol up
+ 0x0100009e // Back
+ 0x010100e3 // TV out
+ 0x01020098 // Lock
+ 0x0103013b // Start
+ 0x020000a3 // Next
+ 0x020100a4 // Play
+ 0x020200a5 // Prev
+ 0x02030160 // OK
+ 0x03000069 // Left
+ 0x0301006a // Right
+ 0x03020067 // Up
+ 0x0303006c>; // Down
+ };
+ };
+ stmpe1: stmpe2401@44 {
+ compatible = "st,stmpe2401";
+ reg = <0x44>;
+ reset-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; // GPIO79
+ interrupts = <14 IRQ_TYPE_EDGE_FALLING>; // GPIO78
+ interrupt-parent = <&gpio2>;
+ interrupt-controller;
+ wakeup-source;
+ pinctrl-names = "default";
+ pinctrl-0 = <&stmpe2401_2_nhk_mode>;
+ stmpe_gpio44: stmpe_gpio {
+ compatible = "st,stmpe-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+ };
+
+ amba {
+ mmcsd: sdi@101f6000 {
+ cd-gpios = <&stmpe_gpio44 7 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&stmpe_gpio44 18 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ /* Custom board node with GPIO pins to active etc */
+ usb-s8815 {
+ /* This will turn off SATA so that MMC/SD can thrive */
+ mmcsd-gpio {
+ gpios = <&stmpe_gpio44 2 0x1>;
+ };
+ };
+};
*/
/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
#include "ste-nomadik-stn8815.dtsi"
/ {
bootargs = "root=/dev/ram0 console=ttyAMA1,115200n8 earlyprintk";
};
- /* This is where the interrupt is routed on the S8815 board */
- external-bus@34000000 {
- ethernet@300 {
- interrupt-parent = <&gpio3>;
- interrupts = <8 0x1>;
- };
- };
-
src@101e0000 {
/* These chrystal drivers are not used on this board */
disable-sxtalo;
};
};
};
+ gpioi2c {
+ gpioi2c_default_mode: gpioi2c_default {
+ gpioi2c_default_cfg {
+ ste,pins = "GPIO73_C21", "GPIO74_C20";
+ ste,input = <0>;
+ };
+ };
+ };
user-led {
user_led_default_mode: user_led_default {
user_led_default_cfg {
};
};
+ /* Ethernet */
+ external-bus@34000000 {
+ compatible = "simple-bus";
+ reg = <0x34000000 0x1000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x34000000 0x1000000>;
+ ethernet@300 {
+ compatible = "smsc,lan91c111";
+ reg = <0x300 0x0fd00>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <8 IRQ_TYPE_EDGE_RISING>;
+ };
+ };
+
+ /* GPIO I2C connected to the USB portions of the STw4811 only */
+ gpio-i2c {
+ compatible = "i2c-gpio";
+ gpios = <&gpio2 10 0>, /* sda */
+ <&gpio2 9 0>; /* scl */
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpioi2c_default_mode>;
+
+ stw4811@2d {
+ compatible = "st,stw4811-usb";
+ reg = <0x2d>;
+ };
+ };
+
+
+ /* Configure card detect for the uSD slot */
+ amba {
+ mmcsd: sdi@101f6000 {
+ cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
+ };
+ };
+
/* Custom board node with GPIO pins to active etc */
usb-s8815 {
/* This will bias the MMC/SD card detect line */
mmcsd_default_mux: mmcsd_mux {
mmcsd_default_mux {
ste,function = "mmcsd";
- ste,pins = "mmcsd_a_1";
+ ste,pins = "mmcsd_a_1", "mmcsd_b_1";
};
};
mmcsd_default_mode: mmcsd_default {
ste,output = <0>;
};
mmcsd_default_cfg2 {
- /* MCCMDDIR, MCDAT0DIR, MCDAT31DIR */
+ /* MCCMDDIR, MCDAT0DIR, MCDAT31DIR, MCDATDIR2 */
ste,pins = "GPIO10_C11", "GPIO15_A12",
- "GPIO16_C13";
+ "GPIO16_C13", "GPIO23_D15";
ste,output = <1>;
};
mmcsd_default_cfg3 {
};
};
};
- i2c2 {
- i2c2_default_mode: i2c2_default {
- i2c2_default_cfg {
- ste,pins = "GPIO73_C21", "GPIO74_C20";
- ste,input = <0>;
- };
- };
- };
};
src: src@101e0000 {
compatible = "stericsson,nomadik-src";
reg = <0x101e0000 0x1000>;
- disable-sxtalo;
- disable-mxtalo;
/*
* MXTAL "Main Chrystal" is a chrystal oscillator @19.2 MHz
};
};
- external-bus@34000000 {
- compatible = "simple-bus";
- reg = <0x34000000 0x1000000>;
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 0x34000000 0x1000000>;
- ethernet@300 {
- compatible = "smsc,lan91c111";
- reg = <0x300 0x0fd00>;
- };
- };
-
/* I2C0 connected to the STw4811 power management chip */
i2c0 {
compatible = "st,nomadik-i2c", "arm,primecell";
};
};
- /* I2C2 connected to the USB portions of the STw4811 only */
- i2c2 {
- compatible = "i2c-gpio";
- gpios = <&gpio2 10 0>, /* sda */
- <&gpio2 9 0>; /* scl */
- #address-cells = <1>;
- #size-cells = <0>;
- pinctrl-names = "default";
- pinctrl-0 = <&i2c2_default_mode>;
-
- stw4811@2d {
- compatible = "st,stw4811-usb";
- reg = <0x2d>;
- };
- };
-
amba {
compatible = "arm,amba-bus";
#address-cells = <1>;
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
- cd-gpios = <&gpio3 15 GPIO_ACTIVE_LOW>;
pinctrl-names = "default";
pinctrl-0 = <&mmcsd_default_mux>, <&mmcsd_default_mode>;
vmmc-supply = <&vmmc_regulator>;
* published by the Free Software Foundation.
*/
/dts-v1/;
-#include "stih407.dtsi"
+#include "stih407-clock.dtsi"
+#include "stih407-family.dtsi"
+#include "stihxxx-b2120.dtsi"
/ {
model = "STiH407 B2120";
compatible = "st,stih407-b2120", "st,stih407";
chosen {
- bootargs = "console=ttyAS0,115200";
+ bootargs = "console=ttyAS0,115200 clk_ignore_unused";
linux,stdout-path = &sbc_serial0;
};
ttyAS0 = &sbc_serial0;
};
- soc {
- sbc_serial0: serial@9530000 {
- status = "okay";
- };
-
- leds {
- compatible = "gpio-leds";
- red {
- #gpio-cells = <2>;
- label = "Front Panel LED";
- gpios = <&pio4 1 0>;
- linux,default-trigger = "heartbeat";
- };
- green {
- #gpio-cells = <2>;
- gpios = <&pio1 3 0>;
- default-state = "off";
- };
- };
-
- i2c@9842000 {
- status = "okay";
- };
-
- i2c@9843000 {
- status = "okay";
- };
-
- i2c@9844000 {
- status = "okay";
- };
-
- i2c@9845000 {
- status = "okay";
- };
-
- i2c@9540000 {
- status = "okay";
- };
-
- /* SSC11 to HDMI */
- i2c@9541000 {
- status = "okay";
- /* HDMI V1.3a supports Standard mode only */
- clock-frequency = <100000>;
- st,i2c-min-scl-pulse-width-us = <0>;
- st,i2c-min-sda-pulse-width-us = <5>;
- };
- };
};
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <dt-bindings/clock/stih407-clks.h>
/ {
clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
/*
* Fixed 30MHz oscillator inputs to SoC
*/
/*
* ARM Peripheral clock for timers
*/
- arm_periph_clk: arm-periph-clk {
+ arm_periph_clk: clk-m-a9-periphs {
#clock-cells = <0>;
- compatible = "fixed-clock";
- clock-frequency = <600000000>;
+ compatible = "fixed-factor-clock";
+
+ clocks = <&clk_m_a9>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ /*
+ * A9 PLL.
+ */
+ clockgen-a9@92b0000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x92b0000 0xffff>;
+
+ clockgen_a9_pll: clockgen-a9-pll {
+ #clock-cells = <1>;
+ compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clockgen-a9-pll-odf";
+ };
+ };
+
+ /*
+ * ARM CPU related clocks.
+ */
+ clk_m_a9: clk-m-a9@92b0000 {
+ #clock-cells = <0>;
+ compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
+ reg = <0x92b0000 0x10000>;
+
+ clocks = <&clockgen_a9_pll 0>,
+ <&clockgen_a9_pll 0>,
+ <&clk_s_c0_flexgen 13>,
+ <&clk_m_a9_ext2f_div2>;
+ };
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+
+ clocks = <&clk_s_c0_flexgen 13>;
+
+ clock-output-names = "clk-m-a9-ext2f-div2";
+
+ clock-div = <2>;
+ clock-mult = <1>;
};
/*
clock-frequency = <200000000>;
clock-output-names = "clk-s-icn-reg-0";
};
+
+ clockgen-a@090ff000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x90ff000 0x1000>;
+
+ clk_s_a0_pll: clk-s-a0-pll {
+ #clock-cells = <1>;
+ compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-a0-pll-ofd-0";
+ };
+
+ clk_s_a0_flexgen: clk-s-a0-flexgen {
+ compatible = "st,flexgen";
+
+ #clock-cells = <1>;
+
+ clocks = <&clk_s_a0_pll 0>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-ic-lmi0";
+ };
+ };
+
+ clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-quadfs660-C", "st,quadfs";
+ reg = <0x9103000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-c0-fs0-ch0",
+ "clk-s-c0-fs0-ch1",
+ "clk-s-c0-fs0-ch2",
+ "clk-s-c0-fs0-ch3";
+ };
+
+ clk_s_c0: clockgen-c@09103000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9103000 0x1000>;
+
+ clk_s_c0_pll0: clk-s-c0-pll0 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-c0-pll0-odf-0";
+ };
+
+ clk_s_c0_pll1: clk-s-c0-pll1 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-c0-pll1-odf-0";
+ };
+
+ clk_s_c0_flexgen: clk-s-c0-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_c0_pll0 0>,
+ <&clk_s_c0_pll1 0>,
+ <&clk_s_c0_quadfs 0>,
+ <&clk_s_c0_quadfs 1>,
+ <&clk_s_c0_quadfs 2>,
+ <&clk_s_c0_quadfs 3>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-icn-gpu",
+ "clk-fdma",
+ "clk-nand",
+ "clk-hva",
+ "clk-proc-stfe",
+ "clk-proc-tp",
+ "clk-rx-icn-dmu",
+ "clk-rx-icn-hva",
+ "clk-icn-cpu",
+ "clk-tx-icn-dmu",
+ "clk-mmc-0",
+ "clk-mmc-1",
+ "clk-jpegdec",
+ "clk-ext2fa9",
+ "clk-ic-bdisp-0",
+ "clk-ic-bdisp-1",
+ "clk-pp-dmu",
+ "clk-vid-dmu",
+ "clk-dss-lpc",
+ "clk-st231-aud-0",
+ "clk-st231-gp-1",
+ "clk-st231-dmu",
+ "clk-icn-lmi",
+ "clk-tx-icn-disp-1",
+ "clk-icn-sbc",
+ "clk-stfe-frc2",
+ "clk-eth-phy",
+ "clk-eth-ref-phyclk",
+ "clk-flash-promip",
+ "clk-main-disp",
+ "clk-aux-disp",
+ "clk-compo-dvp";
+ };
+ };
+
+ clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-quadfs660-D", "st,quadfs";
+ reg = <0x9104000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-d0-fs0-ch0",
+ "clk-s-d0-fs0-ch1",
+ "clk-s-d0-fs0-ch2",
+ "clk-s-d0-fs0-ch3";
+ };
+
+ clockgen-d0@09104000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9104000 0x1000>;
+
+ clk_s_d0_flexgen: clk-s-d0-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_d0_quadfs 0>,
+ <&clk_s_d0_quadfs 1>,
+ <&clk_s_d0_quadfs 2>,
+ <&clk_s_d0_quadfs 3>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-pcm-0",
+ "clk-pcm-1",
+ "clk-pcm-2",
+ "clk-spdiff";
+ };
+ };
+
+ clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-quadfs660-D", "st,quadfs";
+ reg = <0x9106000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-d2-fs0-ch0",
+ "clk-s-d2-fs0-ch1",
+ "clk-s-d2-fs0-ch2",
+ "clk-s-d2-fs0-ch3";
+ };
+
+ clk_tmdsout_hdmi: clk-tmdsout-hdmi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ clockgen-d2@x9106000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9106000 0x1000>;
+
+ clk_s_d2_flexgen: clk-s-d2-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 1>,
+ <&clk_s_d2_quadfs 2>,
+ <&clk_s_d2_quadfs 3>,
+ <&clk_sysin>,
+ <&clk_sysin>,
+ <&clk_tmdsout_hdmi>;
+
+ clock-output-names = "clk-pix-main-disp",
+ "clk-pix-pip",
+ "clk-pix-gdp1",
+ "clk-pix-gdp2",
+ "clk-pix-gdp3",
+ "clk-pix-gdp4",
+ "clk-pix-aux-disp",
+ "clk-denc",
+ "clk-pix-hddac",
+ "clk-hddac",
+ "clk-sddac",
+ "clk-pix-dvo",
+ "clk-dvo",
+ "clk-pix-hdmi",
+ "clk-tmds-hdmi",
+ "clk-ref-hdmiphy";
+ };
+ };
+
+ clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-quadfs660-D", "st,quadfs";
+ reg = <0x9107000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-d3-fs0-ch0",
+ "clk-s-d3-fs0-ch1",
+ "clk-s-d3-fs0-ch2",
+ "clk-s-d3-fs0-ch3";
+ };
+
+ clockgen-d3@9107000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9107000 0x1000>;
+
+ clk_s_d3_flexgen: clk-s-d3-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_d3_quadfs 0>,
+ <&clk_s_d3_quadfs 1>,
+ <&clk_s_d3_quadfs 2>,
+ <&clk_s_d3_quadfs 3>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-stfe-frc1",
+ "clk-tsout-0",
+ "clk-tsout-1",
+ "clk-mchi",
+ "clk-vsens-compo",
+ "clk-frc1-remote",
+ "clk-lpc-0",
+ "clk-lpc-1";
+ };
+ };
};
};
--- /dev/null
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih407-pinctrl.dtsi"
+#include <dt-bindings/reset-controller/stih407-resets.h>
+/ {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <0>;
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a9";
+ reg = <1>;
+ };
+ };
+
+ intc: interrupt-controller@08761000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x08761000 0x1000>, <0x08760100 0x100>;
+ };
+
+ scu@08760000 {
+ compatible = "arm,cortex-a9-scu";
+ reg = <0x08760000 0x1000>;
+ };
+
+ timer@08760200 {
+ interrupt-parent = <&intc>;
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x08760200 0x100>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&arm_periph_clk>;
+ };
+
+ l2: cache-controller {
+ compatible = "arm,pl310-cache";
+ reg = <0x08762000 0x1000>;
+ arm,data-latency = <3 3 3>;
+ arm,tag-latency = <2 2 2>;
+ cache-unified;
+ cache-level = <2>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ interrupt-parent = <&intc>;
+ ranges;
+ compatible = "simple-bus";
+
+ powerdown: powerdown-controller {
+ compatible = "st,stih407-powerdown";
+ #reset-cells = <1>;
+ };
+
+ softreset: softreset-controller {
+ compatible = "st,stih407-softreset";
+ #reset-cells = <1>;
+ };
+
+ picophyreset: picophyreset-controller {
+ compatible = "st,stih407-picophyreset";
+ #reset-cells = <1>;
+ };
+
+ syscfg_sbc: sbc-syscfg@9620000 {
+ compatible = "st,stih407-sbc-syscfg", "syscon";
+ reg = <0x9620000 0x1000>;
+ };
+
+ syscfg_front: front-syscfg@9280000 {
+ compatible = "st,stih407-front-syscfg", "syscon";
+ reg = <0x9280000 0x1000>;
+ };
+
+ syscfg_rear: rear-syscfg@9290000 {
+ compatible = "st,stih407-rear-syscfg", "syscon";
+ reg = <0x9290000 0x1000>;
+ };
+
+ syscfg_flash: flash-syscfg@92a0000 {
+ compatible = "st,stih407-flash-syscfg", "syscon";
+ reg = <0x92a0000 0x1000>;
+ };
+
+ syscfg_sbc_reg: fvdp-lite-syscfg@9600000 {
+ compatible = "st,stih407-sbc-reg-syscfg", "syscon";
+ reg = <0x9600000 0x1000>;
+ };
+
+ syscfg_core: core-syscfg@92b0000 {
+ compatible = "st,stih407-core-syscfg", "syscon";
+ reg = <0x92b0000 0x1000>;
+ };
+
+ syscfg_lpm: lpm-syscfg@94b5100 {
+ compatible = "st,stih407-lpm-syscfg", "syscon";
+ reg = <0x94b5100 0x1000>;
+ };
+
+ serial@9830000 {
+ compatible = "st,asc";
+ reg = <0x9830000 0x2c>;
+ interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_serial0>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+ status = "disabled";
+ };
+
+ serial@9831000 {
+ compatible = "st,asc";
+ reg = <0x9831000 0x2c>;
+ interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_serial1>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+ status = "disabled";
+ };
+
+ serial@9832000 {
+ compatible = "st,asc";
+ reg = <0x9832000 0x2c>;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_serial2>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+
+ status = "disabled";
+ };
+
+ /* SBC_ASC0 - UART10 */
+ sbc_serial0: serial@9530000 {
+ compatible = "st,asc";
+ reg = <0x9530000 0x2c>;
+ interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sbc_serial0>;
+ clocks = <&clk_sysin>;
+
+ status = "disabled";
+ };
+
+ serial@9531000 {
+ compatible = "st,asc";
+ reg = <0x9531000 0x2c>;
+ interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sbc_serial1>;
+ clocks = <&clk_sysin>;
+
+ status = "disabled";
+ };
+
+ i2c@9840000 {
+ compatible = "st,comms-ssc4-i2c";
+ interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x9840000 0x110>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0_default>;
+
+ status = "disabled";
+ };
+
+ i2c@9841000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9841000 0x110>;
+ interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_default>;
+
+ status = "disabled";
+ };
+
+ i2c@9842000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9842000 0x110>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_default>;
+
+ status = "disabled";
+ };
+
+ i2c@9843000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9843000 0x110>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_default>;
+
+ status = "disabled";
+ };
+
+ i2c@9844000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9844000 0x110>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4_default>;
+
+ status = "disabled";
+ };
+
+ i2c@9845000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9845000 0x110>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_s_c0_flexgen CLK_EXT2F_A9>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c5_default>;
+
+ status = "disabled";
+ };
+
+
+ /* SSCs on SBC */
+ i2c@9540000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9540000 0x110>;
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_sysin>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c10_default>;
+
+ status = "disabled";
+ };
+
+ i2c@9541000 {
+ compatible = "st,comms-ssc4-i2c";
+ reg = <0x9541000 0x110>;
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk_sysin>;
+ clock-names = "ssc";
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c11_default>;
+
+ status = "disabled";
+ };
+ };
+};
+++ /dev/null
-/*
- * Copyright (C) 2014 STMicroelectronics Limited.
- * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * publishhed by the Free Software Foundation.
- */
-#include "stih407-clock.dtsi"
-#include "stih407-pinctrl.dtsi"
-/ {
- #address-cells = <1>;
- #size-cells = <1>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
- cpu@0 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <0>;
- };
- cpu@1 {
- device_type = "cpu";
- compatible = "arm,cortex-a9";
- reg = <1>;
- };
- };
-
- intc: interrupt-controller@08761000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x08761000 0x1000>, <0x08760100 0x100>;
- };
-
- scu@08760000 {
- compatible = "arm,cortex-a9-scu";
- reg = <0x08760000 0x1000>;
- };
-
- timer@08760200 {
- interrupt-parent = <&intc>;
- compatible = "arm,cortex-a9-global-timer";
- reg = <0x08760200 0x100>;
- interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&arm_periph_clk>;
- };
-
- l2: cache-controller {
- compatible = "arm,pl310-cache";
- reg = <0x08762000 0x1000>;
- arm,data-latency = <3 3 3>;
- arm,tag-latency = <2 2 2>;
- cache-unified;
- cache-level = <2>;
- };
-
- soc {
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&intc>;
- ranges;
- compatible = "simple-bus";
-
- syscfg_sbc: sbc-syscfg@9620000 {
- compatible = "st,stih407-sbc-syscfg", "syscon";
- reg = <0x9620000 0x1000>;
- };
-
- syscfg_front: front-syscfg@9280000 {
- compatible = "st,stih407-front-syscfg", "syscon";
- reg = <0x9280000 0x1000>;
- };
-
- syscfg_rear: rear-syscfg@9290000 {
- compatible = "st,stih407-rear-syscfg", "syscon";
- reg = <0x9290000 0x1000>;
- };
-
- syscfg_flash: flash-syscfg@92a0000 {
- compatible = "st,stih407-flash-syscfg", "syscon";
- reg = <0x92a0000 0x1000>;
- };
-
- syscfg_sbc_reg: fvdp-lite-syscfg@9600000 {
- compatible = "st,stih407-sbc-reg-syscfg", "syscon";
- reg = <0x9600000 0x1000>;
- };
-
- syscfg_core: core-syscfg@92b0000 {
- compatible = "st,stih407-core-syscfg", "syscon";
- reg = <0x92b0000 0x1000>;
- };
-
- syscfg_lpm: lpm-syscfg@94b5100 {
- compatible = "st,stih407-lpm-syscfg", "syscon";
- reg = <0x94b5100 0x1000>;
- };
-
- serial@9830000 {
- compatible = "st,asc";
- reg = <0x9830000 0x2c>;
- interrupts = <GIC_SPI 122 IRQ_TYPE_NONE>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_serial0>;
- clocks = <&clk_ext2f_a9>;
-
- status = "disabled";
- };
-
- serial@9831000 {
- compatible = "st,asc";
- reg = <0x9831000 0x2c>;
- interrupts = <GIC_SPI 123 IRQ_TYPE_NONE>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_serial1>;
- clocks = <&clk_ext2f_a9>;
-
- status = "disabled";
- };
-
- serial@9832000 {
- compatible = "st,asc";
- reg = <0x9832000 0x2c>;
- interrupts = <GIC_SPI 124 IRQ_TYPE_NONE>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_serial2>;
- clocks = <&clk_ext2f_a9>;
-
- status = "disabled";
- };
-
- /* SBC_ASC0 - UART10 */
- sbc_serial0: serial@9530000 {
- compatible = "st,asc";
- reg = <0x9530000 0x2c>;
- interrupts = <GIC_SPI 138 IRQ_TYPE_NONE>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sbc_serial0>;
- clocks = <&clk_sysin>;
-
- status = "disabled";
- };
-
- serial@9531000 {
- compatible = "st,asc";
- reg = <0x9531000 0x2c>;
- interrupts = <GIC_SPI 139 IRQ_TYPE_NONE>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_sbc_serial1>;
- clocks = <&clk_sysin>;
-
- status = "disabled";
- };
-
- i2c@9840000 {
- compatible = "st,comms-ssc4-i2c";
- interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x9840000 0x110>;
- clocks = <&clk_ext2f_a9>;
- clock-names = "ssc";
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c0_default>;
-
- status = "disabled";
- };
-
- i2c@9841000 {
- compatible = "st,comms-ssc4-i2c";
- reg = <0x9841000 0x110>;
- interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_ext2f_a9>;
- clock-names = "ssc";
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c1_default>;
-
- status = "disabled";
- };
-
- i2c@9842000 {
- compatible = "st,comms-ssc4-i2c";
- reg = <0x9842000 0x110>;
- interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_ext2f_a9>;
- clock-names = "ssc";
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c2_default>;
-
- status = "disabled";
- };
-
- i2c@9843000 {
- compatible = "st,comms-ssc4-i2c";
- reg = <0x9843000 0x110>;
- interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_ext2f_a9>;
- clock-names = "ssc";
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c3_default>;
-
- status = "disabled";
- };
-
- i2c@9844000 {
- compatible = "st,comms-ssc4-i2c";
- reg = <0x9844000 0x110>;
- interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_ext2f_a9>;
- clock-names = "ssc";
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c4_default>;
-
- status = "disabled";
- };
-
- i2c@9845000 {
- compatible = "st,comms-ssc4-i2c";
- reg = <0x9845000 0x110>;
- interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_ext2f_a9>;
- clock-names = "ssc";
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c5_default>;
-
- status = "disabled";
- };
-
-
- /* SSCs on SBC */
- i2c@9540000 {
- compatible = "st,comms-ssc4-i2c";
- reg = <0x9540000 0x110>;
- interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_sysin>;
- clock-names = "ssc";
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c10_default>;
-
- status = "disabled";
- };
-
- i2c@9541000 {
- compatible = "st,comms-ssc4-i2c";
- reg = <0x9541000 0x110>;
- interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clk_sysin>;
- clock-names = "ssc";
- clock-frequency = <400000>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_i2c11_default>;
-
- status = "disabled";
- };
- };
-};
--- /dev/null
+/*
+ * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/dts-v1/;
+#include "stih410.dtsi"
+#include "stihxxx-b2120.dtsi"
+/ {
+ model = "STiH410 B2120";
+ compatible = "st,stih410-b2120", "st,stih410";
+
+ chosen {
+ bootargs = "console=ttyAS0,115200 clk_ignore_unused";
+ linux,stdout-path = &sbc_serial0;
+ };
+
+ memory {
+ device_type = "memory";
+ reg = <0x40000000 0x80000000>;
+ };
+
+ aliases {
+ ttyAS0 = &sbc_serial0;
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2014 STMicroelectronics R&D Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <dt-bindings/clock/stih410-clks.h>
+/ {
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ compatible = "st,stih410-clk", "simple-bus";
+
+ /*
+ * Fixed 30MHz oscillator inputs to SoC
+ */
+ clk_sysin: clk-sysin {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <30000000>;
+ clock-output-names = "CLK_SYSIN";
+ };
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ arm_periph_clk: clk-m-a9-periphs {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+ clocks = <&clk_m_a9>;
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ /*
+ * A9 PLL.
+ */
+ clockgen-a9@92b0000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x92b0000 0xffff>;
+
+ clockgen_a9_pll: clockgen-a9-pll {
+ #clock-cells = <1>;
+ compatible = "st,stih407-plls-c32-a9", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clockgen-a9-pll-odf";
+ };
+ };
+
+ /*
+ * ARM CPU related clocks.
+ */
+ clk_m_a9: clk-m-a9@92b0000 {
+ #clock-cells = <0>;
+ compatible = "st,stih407-clkgen-a9-mux", "st,clkgen-mux";
+ reg = <0x92b0000 0x10000>;
+
+ clocks = <&clockgen_a9_pll 0>,
+ <&clockgen_a9_pll 0>,
+ <&clk_s_c0_flexgen 13>,
+ <&clk_m_a9_ext2f_div2>;
+ };
+
+ /*
+ * ARM Peripheral clock for timers
+ */
+ clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
+ #clock-cells = <0>;
+ compatible = "fixed-factor-clock";
+
+ clocks = <&clk_s_c0_flexgen 13>;
+
+ clock-output-names = "clk-m-a9-ext2f-div2";
+
+ clock-div = <2>;
+ clock-mult = <1>;
+ };
+
+ /*
+ * Bootloader initialized system infrastructure clock for
+ * serial devices.
+ */
+ clk_ext2f_a9: clockgen-c0@13 {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <200000000>;
+ clock-output-names = "clk-s-icn-reg-0";
+ };
+
+ clockgen-a@090ff000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x90ff000 0x1000>;
+
+ clk_s_a0_pll: clk-s-a0-pll {
+ #clock-cells = <1>;
+ compatible = "st,stih407-plls-c32-a0", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-a0-pll-ofd-0";
+ };
+
+ clk_s_a0_flexgen: clk-s-a0-flexgen {
+ compatible = "st,flexgen";
+
+ #clock-cells = <1>;
+
+ clocks = <&clk_s_a0_pll 0>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-ic-lmi0",
+ "clk-ic-lmi1";
+ };
+ };
+
+ clk_s_c0_quadfs: clk-s-c0-quadfs@9103000 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-quadfs660-C", "st,quadfs";
+ reg = <0x9103000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-c0-fs0-ch0",
+ "clk-s-c0-fs0-ch1",
+ "clk-s-c0-fs0-ch2",
+ "clk-s-c0-fs0-ch3";
+ };
+
+ clk_s_c0: clockgen-c@09103000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9103000 0x1000>;
+
+ clk_s_c0_pll0: clk-s-c0-pll0 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-plls-c32-c0_0", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-c0-pll0-odf-0";
+ };
+
+ clk_s_c0_pll1: clk-s-c0-pll1 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-plls-c32-c0_1", "st,clkgen-plls-c32";
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-c0-pll1-odf-0";
+ };
+
+ clk_s_c0_flexgen: clk-s-c0-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_c0_pll0 0>,
+ <&clk_s_c0_pll1 0>,
+ <&clk_s_c0_quadfs 0>,
+ <&clk_s_c0_quadfs 1>,
+ <&clk_s_c0_quadfs 2>,
+ <&clk_s_c0_quadfs 3>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-icn-gpu",
+ "clk-fdma",
+ "clk-nand",
+ "clk-hva",
+ "clk-proc-stfe",
+ "clk-proc-tp",
+ "clk-rx-icn-dmu",
+ "clk-rx-icn-hva",
+ "clk-icn-cpu",
+ "clk-tx-icn-dmu",
+ "clk-mmc-0",
+ "clk-mmc-1",
+ "clk-jpegdec",
+ "clk-ext2fa9",
+ "clk-ic-bdisp-0",
+ "clk-ic-bdisp-1",
+ "clk-pp-dmu",
+ "clk-vid-dmu",
+ "clk-dss-lpc",
+ "clk-st231-aud-0",
+ "clk-st231-gp-1",
+ "clk-st231-dmu",
+ "clk-icn-lmi",
+ "clk-tx-icn-disp-1",
+ "clk-icn-sbc",
+ "clk-stfe-frc2",
+ "clk-eth-phy",
+ "clk-eth-ref-phyclk",
+ "clk-flash-promip",
+ "clk-main-disp",
+ "clk-aux-disp",
+ "clk-compo-dvp",
+ "clk-tx-icn-hades",
+ "clk-rx-icn-hades",
+ "clk-icn-reg-16",
+ "clk-pp-hades",
+ "clk-clust-hades",
+ "clk-hwpe-hades",
+ "clk-fc-hades";
+ };
+ };
+
+ clk_s_d0_quadfs: clk-s-d0-quadfs@9104000 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-quadfs660-D", "st,quadfs";
+ reg = <0x9104000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-d0-fs0-ch0",
+ "clk-s-d0-fs0-ch1",
+ "clk-s-d0-fs0-ch2",
+ "clk-s-d0-fs0-ch3";
+ };
+
+ clockgen-d0@09104000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9104000 0x1000>;
+
+ clk_s_d0_flexgen: clk-s-d0-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_d0_quadfs 0>,
+ <&clk_s_d0_quadfs 1>,
+ <&clk_s_d0_quadfs 2>,
+ <&clk_s_d0_quadfs 3>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-pcm-0",
+ "clk-pcm-1",
+ "clk-pcm-2",
+ "clk-spdiff",
+ "clk-pcmr10-master",
+ "clk-usb2-phy";
+ };
+ };
+
+ clk_s_d2_quadfs: clk-s-d2-quadfs@9106000 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-quadfs660-D", "st,quadfs";
+ reg = <0x9106000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-d2-fs0-ch0",
+ "clk-s-d2-fs0-ch1",
+ "clk-s-d2-fs0-ch2",
+ "clk-s-d2-fs0-ch3";
+ };
+
+ clk_tmdsout_hdmi: clk-tmdsout-hdmi {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ };
+
+ clockgen-d2@x9106000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9106000 0x1000>;
+
+ clk_s_d2_flexgen: clk-s-d2-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_d2_quadfs 0>,
+ <&clk_s_d2_quadfs 1>,
+ <&clk_s_d2_quadfs 2>,
+ <&clk_s_d2_quadfs 3>,
+ <&clk_sysin>,
+ <&clk_sysin>,
+ <&clk_tmdsout_hdmi>;
+
+ clock-output-names = "clk-pix-main-disp",
+ "clk-pix-pip",
+ "clk-pix-gdp1",
+ "clk-pix-gdp2",
+ "clk-pix-gdp3",
+ "clk-pix-gdp4",
+ "clk-pix-aux-disp",
+ "clk-denc",
+ "clk-pix-hddac",
+ "clk-hddac",
+ "clk-sddac",
+ "clk-pix-dvo",
+ "clk-dvo",
+ "clk-pix-hdmi",
+ "clk-tmds-hdmi",
+ "clk-ref-hdmiphy";
+ };
+ };
+
+ clk_s_d3_quadfs: clk-s-d3-quadfs@9107000 {
+ #clock-cells = <1>;
+ compatible = "st,stih407-quadfs660-D", "st,quadfs";
+ reg = <0x9107000 0x1000>;
+
+ clocks = <&clk_sysin>;
+
+ clock-output-names = "clk-s-d3-fs0-ch0",
+ "clk-s-d3-fs0-ch1",
+ "clk-s-d3-fs0-ch2",
+ "clk-s-d3-fs0-ch3";
+ };
+
+ clockgen-d3@9107000 {
+ compatible = "st,clkgen-c32";
+ reg = <0x9107000 0x1000>;
+
+ clk_s_d3_flexgen: clk-s-d3-flexgen {
+ #clock-cells = <1>;
+ compatible = "st,flexgen";
+
+ clocks = <&clk_s_d3_quadfs 0>,
+ <&clk_s_d3_quadfs 1>,
+ <&clk_s_d3_quadfs 2>,
+ <&clk_s_d3_quadfs 3>,
+ <&clk_sysin>;
+
+ clock-output-names = "clk-stfe-frc1",
+ "clk-tsout-0",
+ "clk-tsout-1",
+ "clk-mchi",
+ "clk-vsens-compo",
+ "clk-frc1-remote",
+ "clk-lpc-0",
+ "clk-lpc-1";
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "st-pincfg.h"
+/ {
+
+ soc {
+ pin-controller-rear {
+
+ usb0 {
+ pinctrl_usb0: usb2-0 {
+ st,pins {
+ usb-oc-detect = <&pio35 0 ALT1 IN>;
+ usb-pwr-enable = <&pio35 1 ALT1 OUT>;
+ };
+ };
+ };
+
+ usb1 {
+ pinctrl_usb1: usb2-1 {
+ st,pins {
+ usb-oc-detect = <&pio35 2 ALT1 IN>;
+ usb-pwr-enable = <&pio35 3 ALT1 OUT>;
+ };
+ };
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright (C) 2014 STMicroelectronics Limited.
+ * Author: Peter Griffin <peter.griffin@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * publishhed by the Free Software Foundation.
+ */
+#include "stih410-clock.dtsi"
+#include "stih407-family.dtsi"
+#include "stih410-pinctrl.dtsi"
+/ {
+
+};
/ {
aliases {
- gpio0 = &PIO0;
- gpio1 = &PIO1;
- gpio2 = &PIO2;
- gpio3 = &PIO3;
- gpio4 = &PIO4;
- gpio5 = &PIO5;
- gpio6 = &PIO6;
- gpio7 = &PIO7;
- gpio8 = &PIO8;
- gpio9 = &PIO9;
- gpio10 = &PIO10;
- gpio11 = &PIO11;
- gpio12 = &PIO12;
- gpio13 = &PIO13;
- gpio14 = &PIO14;
- gpio15 = &PIO15;
- gpio16 = &PIO16;
- gpio17 = &PIO17;
- gpio18 = &PIO18;
- gpio19 = &PIO100;
- gpio20 = &PIO101;
- gpio21 = &PIO102;
- gpio22 = &PIO103;
- gpio23 = &PIO104;
- gpio24 = &PIO105;
- gpio25 = &PIO106;
- gpio26 = &PIO107;
+ gpio0 = &pio0;
+ gpio1 = &pio1;
+ gpio2 = &pio2;
+ gpio3 = &pio3;
+ gpio4 = &pio4;
+ gpio5 = &pio5;
+ gpio6 = &pio6;
+ gpio7 = &pio7;
+ gpio8 = &pio8;
+ gpio9 = &pio9;
+ gpio10 = &pio10;
+ gpio11 = &pio11;
+ gpio12 = &pio12;
+ gpio13 = &pio13;
+ gpio14 = &pio14;
+ gpio15 = &pio15;
+ gpio16 = &pio16;
+ gpio17 = &pio17;
+ gpio18 = &pio18;
+ gpio19 = &pio100;
+ gpio20 = &pio101;
+ gpio21 = &pio102;
+ gpio22 = &pio103;
+ gpio23 = &pio104;
+ gpio24 = &pio105;
+ gpio25 = &pio106;
+ gpio26 = &pio107;
};
soc {
interrupt-names = "irqmux";
ranges = <0 0xfe610000 0x5000>;
- PIO0: gpio@fe610000 {
+ pio0: gpio@fe610000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0 0x100>;
st,bank-name = "PIO0";
};
- PIO1: gpio@fe611000 {
+ pio1: gpio@fe611000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x1000 0x100>;
st,bank-name = "PIO1";
};
- PIO2: gpio@fe612000 {
+ pio2: gpio@fe612000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x2000 0x100>;
st,bank-name = "PIO2";
};
- PIO3: gpio@fe613000 {
+ pio3: gpio@fe613000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x3000 0x100>;
st,bank-name = "PIO3";
};
- PIO4: gpio@fe614000 {
+ pio4: gpio@fe614000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
sbc_serial1 {
pinctrl_sbc_serial1:sbc_serial1 {
st,pins {
- tx = <&PIO2 6 ALT3 OUT>;
- rx = <&PIO2 7 ALT3 IN>;
+ tx = <&pio2 6 ALT3 OUT>;
+ rx = <&pio2 7 ALT3 IN>;
};
};
};
keyscan {
pinctrl_keyscan: keyscan {
st,pins {
- keyin0 = <&PIO0 2 ALT2 IN>;
- keyin1 = <&PIO0 3 ALT2 IN>;
- keyin2 = <&PIO0 4 ALT2 IN>;
- keyin3 = <&PIO2 6 ALT2 IN>;
-
- keyout0 = <&PIO1 6 ALT2 OUT>;
- keyout1 = <&PIO1 7 ALT2 OUT>;
- keyout2 = <&PIO0 6 ALT2 OUT>;
- keyout3 = <&PIO2 7 ALT2 OUT>;
+ keyin0 = <&pio0 2 ALT2 IN>;
+ keyin1 = <&pio0 3 ALT2 IN>;
+ keyin2 = <&pio0 4 ALT2 IN>;
+ keyin3 = <&pio2 6 ALT2 IN>;
+
+ keyout0 = <&pio1 6 ALT2 OUT>;
+ keyout1 = <&pio1 7 ALT2 OUT>;
+ keyout2 = <&pio0 6 ALT2 OUT>;
+ keyout3 = <&pio2 7 ALT2 OUT>;
};
};
};
sbc_i2c0 {
pinctrl_sbc_i2c0_default: sbc_i2c0-default {
st,pins {
- sda = <&PIO4 6 ALT1 BIDIR>;
- scl = <&PIO4 5 ALT1 BIDIR>;
+ sda = <&pio4 6 ALT1 BIDIR>;
+ scl = <&pio4 5 ALT1 BIDIR>;
};
};
};
sbc_i2c1 {
pinctrl_sbc_i2c1_default: sbc_i2c1-default {
st,pins {
- sda = <&PIO3 2 ALT2 BIDIR>;
- scl = <&PIO3 1 ALT2 BIDIR>;
+ sda = <&pio3 2 ALT2 BIDIR>;
+ scl = <&pio3 1 ALT2 BIDIR>;
};
};
};
rc{
pinctrl_ir: ir0 {
st,pins {
- ir = <&PIO4 0 ALT2 IN>;
+ ir = <&pio4 0 ALT2 IN>;
};
};
};
gmac1 {
pinctrl_mii1: mii1 {
st,pins {
- txd0 = <&PIO0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txd1 = <&PIO0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txd2 = <&PIO0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txd3 = <&PIO0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txer = <&PIO0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txen = <&PIO0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
- col = <&PIO0 7 ALT1 IN BYPASS 1000>;
- mdio = <&PIO1 0 ALT1 OUT BYPASS 0>;
- mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
- crs = <&PIO1 2 ALT1 IN BYPASS 1000>;
- mdint = <&PIO1 3 ALT1 IN BYPASS 0>;
- rxd0 = <&PIO1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxd1 = <&PIO1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxd2 = <&PIO1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxd3 = <&PIO1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxdv = <&PIO2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rx_er = <&PIO2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
- phyclk = <&PIO2 3 ALT1 IN NICLK 1000 CLK_A>;
+ txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+ col = <&pio0 7 ALT1 IN BYPASS 1000>;
+ mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+ mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+ crs = <&pio1 2 ALT1 IN BYPASS 1000>;
+ mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+ rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+ phyclk = <&pio2 3 ALT1 IN NICLK 1000 CLK_A>;
};
};
pinctrl_rgmii1: rgmii1-0 {
st,pins {
- txd0 = <&PIO0 0 ALT1 OUT DE_IO 1000 CLK_A>;
- txd1 = <&PIO0 1 ALT1 OUT DE_IO 1000 CLK_A>;
- txd2 = <&PIO0 2 ALT1 OUT DE_IO 1000 CLK_A>;
- txd3 = <&PIO0 3 ALT1 OUT DE_IO 1000 CLK_A>;
- txen = <&PIO0 5 ALT1 OUT DE_IO 0 CLK_A>;
- txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
- mdio = <&PIO1 0 ALT1 OUT BYPASS 0>;
- mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
- rxd0 = <&PIO1 4 ALT1 IN DE_IO 0 CLK_A>;
- rxd1 = <&PIO1 5 ALT1 IN DE_IO 0 CLK_A>;
- rxd2 = <&PIO1 6 ALT1 IN DE_IO 0 CLK_A>;
- rxd3 = <&PIO1 7 ALT1 IN DE_IO 0 CLK_A>;
-
- rxdv = <&PIO2 0 ALT1 IN DE_IO 500 CLK_A>;
- rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
- phyclk = <&PIO2 3 ALT4 OUT NICLK 0 CLK_B>;
-
- clk125= <&PIO3 7 ALT4 IN NICLK 0 CLK_A>;
+ txd0 = <&pio0 0 ALT1 OUT DE_IO 1000 CLK_A>;
+ txd1 = <&pio0 1 ALT1 OUT DE_IO 1000 CLK_A>;
+ txd2 = <&pio0 2 ALT1 OUT DE_IO 1000 CLK_A>;
+ txd3 = <&pio0 3 ALT1 OUT DE_IO 1000 CLK_A>;
+ txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>;
+ txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+ mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+ mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+ rxd0 = <&pio1 4 ALT1 IN DE_IO 0 CLK_A>;
+ rxd1 = <&pio1 5 ALT1 IN DE_IO 0 CLK_A>;
+ rxd2 = <&pio1 6 ALT1 IN DE_IO 0 CLK_A>;
+ rxd3 = <&pio1 7 ALT1 IN DE_IO 0 CLK_A>;
+
+ rxdv = <&pio2 0 ALT1 IN DE_IO 500 CLK_A>;
+ rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+ phyclk = <&pio2 3 ALT4 OUT NICLK 0 CLK_B>;
+
+ clk125= <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
};
};
};
interrupt-names = "irqmux";
ranges = <0 0xfee00000 0x8000>;
- PIO5: gpio@fee00000 {
+ pio5: gpio@fee00000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0 0x100>;
st,bank-name = "PIO5";
};
- PIO6: gpio@fee01000 {
+ pio6: gpio@fee01000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x1000 0x100>;
st,bank-name = "PIO6";
};
- PIO7: gpio@fee02000 {
+ pio7: gpio@fee02000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x2000 0x100>;
st,bank-name = "PIO7";
};
- PIO8: gpio@fee03000 {
+ pio8: gpio@fee03000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x3000 0x100>;
st,bank-name = "PIO8";
};
- PIO9: gpio@fee04000 {
+ pio9: gpio@fee04000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x4000 0x100>;
st,bank-name = "PIO9";
};
- PIO10: gpio@fee05000 {
+ pio10: gpio@fee05000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x5000 0x100>;
st,bank-name = "PIO10";
};
- PIO11: gpio@fee06000 {
+ pio11: gpio@fee06000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x6000 0x100>;
st,bank-name = "PIO11";
};
- PIO12: gpio@fee07000 {
+ pio12: gpio@fee07000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
i2c0 {
pinctrl_i2c0_default: i2c0-default {
st,pins {
- sda = <&PIO9 3 ALT1 BIDIR>;
- scl = <&PIO9 2 ALT1 BIDIR>;
+ sda = <&pio9 3 ALT1 BIDIR>;
+ scl = <&pio9 2 ALT1 BIDIR>;
};
};
};
i2c1 {
pinctrl_i2c1_default: i2c1-default {
st,pins {
- sda = <&PIO12 1 ALT1 BIDIR>;
- scl = <&PIO12 0 ALT1 BIDIR>;
+ sda = <&pio12 1 ALT1 BIDIR>;
+ scl = <&pio12 0 ALT1 BIDIR>;
};
};
};
interrupt-names = "irqmux";
ranges = <0 0xfe820000 0x8000>;
- PIO13: gpio@fe820000 {
+ pio13: gpio@fe820000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0 0x100>;
st,bank-name = "PIO13";
};
- PIO14: gpio@fe821000 {
+ pio14: gpio@fe821000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x1000 0x100>;
st,bank-name = "PIO14";
};
- PIO15: gpio@fe822000 {
+ pio15: gpio@fe822000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x2000 0x100>;
st,bank-name = "PIO15";
};
- PIO16: gpio@fe823000 {
+ pio16: gpio@fe823000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x3000 0x100>;
st,bank-name = "PIO16";
};
- PIO17: gpio@fe824000 {
+ pio17: gpio@fe824000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x4000 0x100>;
st,bank-name = "PIO17";
};
- PIO18: gpio@fe825000 {
+ pio18: gpio@fe825000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
serial2 {
pinctrl_serial2: serial2-0 {
st,pins {
- tx = <&PIO17 4 ALT2 OUT>;
- rx = <&PIO17 5 ALT2 IN>;
+ tx = <&pio17 4 ALT2 OUT>;
+ rx = <&pio17 5 ALT2 IN>;
};
};
};
gmac0{
pinctrl_mii0: mii0 {
st,pins {
- mdint = <&PIO13 6 ALT2 IN BYPASS 0>;
- txen = <&PIO13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
-
- txd0 = <&PIO14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- txd1 = <&PIO14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- txd2 = <&PIO14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
- txd3 = <&PIO14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
-
- txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>;
- txer = <&PIO15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- crs = <&PIO15 2 ALT2 IN BYPASS 1000>;
- col = <&PIO15 3 ALT2 IN BYPASS 1000>;
- mdio = <&PIO15 4 ALT2 OUT BYPASS 3000>;
- mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>;
-
- rxd0 = <&PIO16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxd1 = <&PIO16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxd2 = <&PIO16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxd3 = <&PIO16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxdv = <&PIO15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
- phyclk = <&PIO13 5 ALT2 OUT NICLK 1000 CLK_A>;
+ mdint = <&pio13 6 ALT2 IN BYPASS 0>;
+ txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+
+ txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
+ txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
+
+ txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>;
+ txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ crs = <&pio15 2 ALT2 IN BYPASS 1000>;
+ col = <&pio15 3 ALT2 IN BYPASS 1000>;
+ mdio = <&pio15 4 ALT2 OUT BYPASS 3000>;
+ mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>;
+
+ rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>;
+ phyclk = <&pio13 5 ALT2 OUT NICLK 1000 CLK_A>;
};
};
pinctrl_gmii0: gmii0 {
st,pins {
- mdint = <&PIO13 6 ALT2 IN BYPASS 0>;
- mdio = <&PIO15 4 ALT2 OUT BYPASS 3000>;
- mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>;
- txen = <&PIO13 7 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
-
- txd0 = <&PIO14 0 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
- txd1 = <&PIO14 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
- txd2 = <&PIO14 2 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
- txd3 = <&PIO14 3 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
- txd4 = <&PIO14 4 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
- txd5 = <&PIO14 5 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
- txd6 = <&PIO14 6 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
- txd7 = <&PIO14 7 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
-
- txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>;
- txer = <&PIO15 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
- crs = <&PIO15 2 ALT2 IN BYPASS 1000>;
- col = <&PIO15 3 ALT2 IN BYPASS 1000>;
- rxdv = <&PIO15 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
- rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
-
- rxd0 = <&PIO16 0 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
- rxd1 = <&PIO16 1 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
- rxd2 = <&PIO16 2 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
- rxd3 = <&PIO16 3 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
- rxd4 = <&PIO16 4 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
- rxd5 = <&PIO16 5 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
- rxd6 = <&PIO16 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
- rxd7 = <&PIO16 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
-
- rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
- clk125 = <&PIO17 6 ALT1 IN NICLK 0 CLK_A>;
- phyclk = <&PIO13 5 ALT4 OUT NICLK 0 CLK_B>;
+ mdint = <&pio13 6 ALT2 IN BYPASS 0>;
+ mdio = <&pio15 4 ALT2 OUT BYPASS 3000>;
+ mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>;
+ txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
+
+ txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
+ txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
+ txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
+ txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
+ txd4 = <&pio14 4 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
+ txd5 = <&pio14 5 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
+ txd6 = <&pio14 6 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
+ txd7 = <&pio14 7 ALT2 OUT SE_NICLK_IO 3000 CLK_B>;
+
+ txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>;
+ txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 3000 CLK_A>;
+ crs = <&pio15 2 ALT2 IN BYPASS 1000>;
+ col = <&pio15 3 ALT2 IN BYPASS 1000>;
+ rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+
+ rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd4 = <&pio16 4 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd5 = <&pio16 5 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd6 = <&pio16 6 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+ rxd7 = <&pio16 7 ALT2 IN SE_NICLK_IO 1500 CLK_A>;
+
+ rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>;
+ clk125 = <&pio17 6 ALT1 IN NICLK 0 CLK_A>;
+ phyclk = <&pio13 5 ALT4 OUT NICLK 0 CLK_B>;
};
};
};
+
+ mmc0 {
+ pinctrl_mmc0: mmc0 {
+ st,pins {
+ mmcclk = <&pio13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>;
+ data0 = <&pio14 4 ALT4 BIDIR_PU BYPASS 0>;
+ data1 = <&pio14 5 ALT4 BIDIR_PU BYPASS 0>;
+ data2 = <&pio14 6 ALT4 BIDIR_PU BYPASS 0>;
+ data3 = <&pio14 7 ALT4 BIDIR_PU BYPASS 0>;
+ cmd = <&pio15 1 ALT4 BIDIR_PU BYPASS 0>;
+ wp = <&pio15 3 ALT4 IN>;
+ data4 = <&pio16 4 ALT4 BIDIR_PU BYPASS 0>;
+ data5 = <&pio16 5 ALT4 BIDIR_PU BYPASS 0>;
+ data6 = <&pio16 6 ALT4 BIDIR_PU BYPASS 0>;
+ data7 = <&pio16 7 ALT4 BIDIR_PU BYPASS 0>;
+ pwr = <&pio17 1 ALT4 OUT>;
+ cd = <&pio17 2 ALT4 IN>;
+ led = <&pio17 3 ALT4 OUT>;
+ };
+ };
+ };
};
pin-controller-left {
interrupt-names = "irqmux";
ranges = <0 0xfd6b0000 0x3000>;
- PIO100: gpio@fd6b0000 {
+ pio100: gpio@fd6b0000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0 0x100>;
st,bank-name = "PIO100";
};
- PIO101: gpio@fd6b1000 {
+ pio101: gpio@fd6b1000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x1000 0x100>;
st,bank-name = "PIO101";
};
- PIO102: gpio@fd6b2000 {
+ pio102: gpio@fd6b2000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
interrupt-names = "irqmux";
ranges = <0 0xfd330000 0x5000>;
- PIO103: gpio@fd330000 {
+ pio103: gpio@fd330000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0 0x100>;
st,bank-name = "PIO103";
};
- PIO104: gpio@fd331000 {
+ pio104: gpio@fd331000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x1000 0x100>;
st,bank-name = "PIO104";
};
- PIO105: gpio@fd332000 {
+ pio105: gpio@fd332000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x2000 0x100>;
st,bank-name = "PIO105";
};
- PIO106: gpio@fd333000 {
+ pio106: gpio@fd333000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x3000 0x100>;
st,bank-name = "PIO106";
};
- PIO107: gpio@fd334000 {
+ pio107: gpio@fd334000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
resets = <&powerdown STIH415_KEYSCAN_POWERDOWN>,
<&softreset STIH415_KEYSCAN_SOFTRESET>;
};
+
+ mmc0: sdhci@fe81e000 {
+ compatible = "st,sdhci";
+ status = "disabled";
+ reg = <0xfe81e000 0x1000>;
+ interrupts = <GIC_SPI 145 IRQ_TYPE_NONE>;
+ interrupt-names = "mmcirq";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc0>;
+ clock-names = "mmc";
+ clocks = <&clk_s_a1_ls 1>;
+ };
};
};
/ {
model = "STiH416 B2020";
compatible = "st,stih416-b2020", "st,stih416";
+
+ soc {
+ mmc1: sdhci@fe81f000 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+ };
+
+ miphy365x_phy: phy@fe382000 {
+ phy_port0: port@fe382000 {
+ st,sata-gen = <3>;
+ };
+
+ phy_port1: port@fe38a000 {
+ st,pcie-tx-pol-inv;
+ };
+ };
+
+ sata0: sata@fe380000{
+ status = "okay";
+ };
+ };
};
red {
#gpio-cells = <1>;
label = "Front Panel LED";
- gpios = <&PIO4 1>;
+ gpios = <&pio4 1>;
linux,default-trigger = "heartbeat";
};
green {
- gpios = <&PIO1 3>;
+ gpios = <&pio1 3>;
default-state = "off";
};
};
ethernet1: dwmac@fef08000 {
- snps,reset-gpio = <&PIO0 7>;
+ snps,reset-gpio = <&pio0 7>;
+ };
+
+ mmc1: sdhci@fe81f000 {
+ status = "okay";
+ bus-width = <8>;
+ non-removable;
+ };
+
+ miphy365x_phy: phy@fe382000 {
+ phy_port0: port@fe382000 {
+ st,sata-gen = <3>;
+ };
+
+ phy_port1: port@fe38a000 {
+ st,pcie-tx-pol-inv;
+ };
+ };
+
+ sata0: sata@fe380000{
+ status = "okay";
};
};
};
/ {
aliases {
- gpio0 = &PIO0;
- gpio1 = &PIO1;
- gpio2 = &PIO2;
- gpio3 = &PIO3;
- gpio4 = &PIO4;
- gpio5 = &PIO40;
- gpio6 = &PIO5;
- gpio7 = &PIO6;
- gpio8 = &PIO7;
- gpio9 = &PIO8;
- gpio10 = &PIO9;
- gpio11 = &PIO10;
- gpio12 = &PIO11;
- gpio13 = &PIO12;
- gpio14 = &PIO30;
- gpio15 = &PIO31;
- gpio16 = &PIO13;
- gpio17 = &PIO14;
- gpio18 = &PIO15;
- gpio19 = &PIO16;
- gpio20 = &PIO17;
- gpio21 = &PIO18;
- gpio22 = &PIO100;
- gpio23 = &PIO101;
- gpio24 = &PIO102;
- gpio25 = &PIO103;
- gpio26 = &PIO104;
- gpio27 = &PIO105;
- gpio28 = &PIO106;
- gpio29 = &PIO107;
+ gpio0 = &pio0;
+ gpio1 = &pio1;
+ gpio2 = &pio2;
+ gpio3 = &pio3;
+ gpio4 = &pio4;
+ gpio5 = &pio40;
+ gpio6 = &pio5;
+ gpio7 = &pio6;
+ gpio8 = &pio7;
+ gpio9 = &pio8;
+ gpio10 = &pio9;
+ gpio11 = &pio10;
+ gpio12 = &pio11;
+ gpio13 = &pio12;
+ gpio14 = &pio30;
+ gpio15 = &pio31;
+ gpio16 = &pio13;
+ gpio17 = &pio14;
+ gpio18 = &pio15;
+ gpio19 = &pio16;
+ gpio20 = &pio17;
+ gpio21 = &pio18;
+ gpio22 = &pio100;
+ gpio23 = &pio101;
+ gpio24 = &pio102;
+ gpio25 = &pio103;
+ gpio26 = &pio104;
+ gpio27 = &pio105;
+ gpio28 = &pio106;
+ gpio29 = &pio107;
};
soc {
interrupt-names = "irqmux";
ranges = <0 0xfe610000 0x6000>;
- PIO0: gpio@fe610000 {
+ pio0: gpio@fe610000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0 0x100>;
st,bank-name = "PIO0";
};
- PIO1: gpio@fe611000 {
+ pio1: gpio@fe611000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x1000 0x100>;
st,bank-name = "PIO1";
};
- PIO2: gpio@fe612000 {
+ pio2: gpio@fe612000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x2000 0x100>;
st,bank-name = "PIO2";
};
- PIO3: gpio@fe613000 {
+ pio3: gpio@fe613000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x3000 0x100>;
st,bank-name = "PIO3";
};
- PIO4: gpio@fe614000 {
+ pio4: gpio@fe614000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x4000 0x100>;
st,bank-name = "PIO4";
};
- PIO40: gpio@fe615000 {
+ pio40: gpio@fe615000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
rc{
pinctrl_ir: ir0 {
st,pins {
- ir = <&PIO4 0 ALT2 IN>;
+ ir = <&pio4 0 ALT2 IN>;
};
};
};
sbc_serial1 {
pinctrl_sbc_serial1: sbc_serial1 {
st,pins {
- tx = <&PIO2 6 ALT3 OUT>;
- rx = <&PIO2 7 ALT3 IN>;
+ tx = <&pio2 6 ALT3 OUT>;
+ rx = <&pio2 7 ALT3 IN>;
};
};
};
keyscan {
pinctrl_keyscan: keyscan {
st,pins {
- keyin0 = <&PIO0 2 ALT2 IN>;
- keyin1 = <&PIO0 3 ALT2 IN>;
- keyin2 = <&PIO0 4 ALT2 IN>;
- keyin3 = <&PIO2 6 ALT2 IN>;
-
- keyout0 = <&PIO1 6 ALT2 OUT>;
- keyout1 = <&PIO1 7 ALT2 OUT>;
- keyout2 = <&PIO0 6 ALT2 OUT>;
- keyout3 = <&PIO2 7 ALT2 OUT>;
+ keyin0 = <&pio0 2 ALT2 IN>;
+ keyin1 = <&pio0 3 ALT2 IN>;
+ keyin2 = <&pio0 4 ALT2 IN>;
+ keyin3 = <&pio2 6 ALT2 IN>;
+
+ keyout0 = <&pio1 6 ALT2 OUT>;
+ keyout1 = <&pio1 7 ALT2 OUT>;
+ keyout2 = <&pio0 6 ALT2 OUT>;
+ keyout3 = <&pio2 7 ALT2 OUT>;
};
};
};
sbc_i2c0 {
pinctrl_sbc_i2c0_default: sbc_i2c0-default {
st,pins {
- sda = <&PIO4 6 ALT1 BIDIR>;
- scl = <&PIO4 5 ALT1 BIDIR>;
+ sda = <&pio4 6 ALT1 BIDIR>;
+ scl = <&pio4 5 ALT1 BIDIR>;
+ };
+ };
+ };
+
+ usb {
+ pinctrl_usb3: usb3 {
+ st,pins {
+ oc-detect = <&pio40 0 ALT1 IN>;
+ pwr-enable = <&pio40 1 ALT1 OUT>;
};
};
};
sbc_i2c1 {
pinctrl_sbc_i2c1_default: sbc_i2c1-default {
st,pins {
- sda = <&PIO3 2 ALT2 BIDIR>;
- scl = <&PIO3 1 ALT2 BIDIR>;
+ sda = <&pio3 2 ALT2 BIDIR>;
+ scl = <&pio3 1 ALT2 BIDIR>;
};
};
};
gmac1 {
pinctrl_mii1: mii1 {
st,pins {
- txd0 = <&PIO0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txd1 = <&PIO0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txd2 = <&PIO0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txd3 = <&PIO0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txer = <&PIO0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txen = <&PIO0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
- txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
- col = <&PIO0 7 ALT1 IN BYPASS 1000>;
-
- mdio = <&PIO1 0 ALT1 OUT BYPASS 1500>;
- mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
- crs = <&PIO1 2 ALT1 IN BYPASS 1000>;
- mdint = <&PIO1 3 ALT1 IN BYPASS 0>;
- rxd0 = <&PIO1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxd1 = <&PIO1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxd2 = <&PIO1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxd3 = <&PIO1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
-
- rxdv = <&PIO2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rx_er = <&PIO2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
- rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
- phyclk = <&PIO2 3 ALT1 OUT NICLK 0 CLK_A>;
+ txd0 = <&pio0 0 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd1 = <&pio0 1 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd2 = <&pio0 2 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txd3 = <&pio0 3 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txer = <&pio0 4 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txen = <&pio0 5 ALT1 OUT SE_NICLK_IO 0 CLK_A>;
+ txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+ col = <&pio0 7 ALT1 IN BYPASS 1000>;
+
+ mdio = <&pio1 0 ALT1 OUT BYPASS 1500>;
+ mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+ crs = <&pio1 2 ALT1 IN BYPASS 1000>;
+ mdint = <&pio1 3 ALT1 IN BYPASS 0>;
+ rxd0 = <&pio1 4 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd1 = <&pio1 5 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd2 = <&pio1 6 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxd3 = <&pio1 7 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+
+ rxdv = <&pio2 0 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rx_er = <&pio2 1 ALT1 IN SE_NICLK_IO 0 CLK_A>;
+ rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+ phyclk = <&pio2 3 ALT1 OUT NICLK 0 CLK_A>;
};
};
pinctrl_rgmii1: rgmii1-0 {
st,pins {
- txd0 = <&PIO0 0 ALT1 OUT DE_IO 500 CLK_A>;
- txd1 = <&PIO0 1 ALT1 OUT DE_IO 500 CLK_A>;
- txd2 = <&PIO0 2 ALT1 OUT DE_IO 500 CLK_A>;
- txd3 = <&PIO0 3 ALT1 OUT DE_IO 500 CLK_A>;
- txen = <&PIO0 5 ALT1 OUT DE_IO 0 CLK_A>;
- txclk = <&PIO0 6 ALT1 IN NICLK 0 CLK_A>;
-
- mdio = <&PIO1 0 ALT1 OUT BYPASS 0>;
- mdc = <&PIO1 1 ALT1 OUT NICLK 0 CLK_A>;
- rxd0 = <&PIO1 4 ALT1 IN DE_IO 500 CLK_A>;
- rxd1 = <&PIO1 5 ALT1 IN DE_IO 500 CLK_A>;
- rxd2 = <&PIO1 6 ALT1 IN DE_IO 500 CLK_A>;
- rxd3 = <&PIO1 7 ALT1 IN DE_IO 500 CLK_A>;
-
- rxdv = <&PIO2 0 ALT1 IN DE_IO 500 CLK_A>;
- rxclk = <&PIO2 2 ALT1 IN NICLK 0 CLK_A>;
- phyclk = <&PIO2 3 ALT4 OUT NICLK 0 CLK_B>;
-
- clk125= <&PIO3 7 ALT4 IN NICLK 0 CLK_A>;
+ txd0 = <&pio0 0 ALT1 OUT DE_IO 500 CLK_A>;
+ txd1 = <&pio0 1 ALT1 OUT DE_IO 500 CLK_A>;
+ txd2 = <&pio0 2 ALT1 OUT DE_IO 500 CLK_A>;
+ txd3 = <&pio0 3 ALT1 OUT DE_IO 500 CLK_A>;
+ txen = <&pio0 5 ALT1 OUT DE_IO 0 CLK_A>;
+ txclk = <&pio0 6 ALT1 IN NICLK 0 CLK_A>;
+
+ mdio = <&pio1 0 ALT1 OUT BYPASS 0>;
+ mdc = <&pio1 1 ALT1 OUT NICLK 0 CLK_A>;
+ rxd0 = <&pio1 4 ALT1 IN DE_IO 500 CLK_A>;
+ rxd1 = <&pio1 5 ALT1 IN DE_IO 500 CLK_A>;
+ rxd2 = <&pio1 6 ALT1 IN DE_IO 500 CLK_A>;
+ rxd3 = <&pio1 7 ALT1 IN DE_IO 500 CLK_A>;
+
+ rxdv = <&pio2 0 ALT1 IN DE_IO 500 CLK_A>;
+ rxclk = <&pio2 2 ALT1 IN NICLK 0 CLK_A>;
+ phyclk = <&pio2 3 ALT4 OUT NICLK 0 CLK_B>;
+
+ clk125= <&pio3 7 ALT4 IN NICLK 0 CLK_A>;
};
};
};
interrupt-names = "irqmux";
ranges = <0 0xfee00000 0x10000>;
- PIO5: gpio@fee00000 {
+ pio5: gpio@fee00000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0 0x100>;
st,bank-name = "PIO5";
};
- PIO6: gpio@fee01000 {
+ pio6: gpio@fee01000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x1000 0x100>;
st,bank-name = "PIO6";
};
- PIO7: gpio@fee02000 {
+ pio7: gpio@fee02000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x2000 0x100>;
st,bank-name = "PIO7";
};
- PIO8: gpio@fee03000 {
+ pio8: gpio@fee03000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x3000 0x100>;
st,bank-name = "PIO8";
};
- PIO9: gpio@fee04000 {
+ pio9: gpio@fee04000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x4000 0x100>;
st,bank-name = "PIO9";
};
- PIO10: gpio@fee05000 {
+ pio10: gpio@fee05000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x5000 0x100>;
st,bank-name = "PIO10";
};
- PIO11: gpio@fee06000 {
+ pio11: gpio@fee06000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x6000 0x100>;
st,bank-name = "PIO11";
};
- PIO12: gpio@fee07000 {
+ pio12: gpio@fee07000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x7000 0x100>;
st,bank-name = "PIO12";
};
- PIO30: gpio@fee08000 {
+ pio30: gpio@fee08000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x8000 0x100>;
st,bank-name = "PIO30";
};
- PIO31: gpio@fee09000 {
+ pio31: gpio@fee09000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
serial2-oe {
pinctrl_serial2_oe: serial2-1 {
st,pins {
- output-enable = <&PIO11 3 ALT2 OUT>;
+ output-enable = <&pio11 3 ALT2 OUT>;
};
};
};
i2c0 {
pinctrl_i2c0_default: i2c0-default {
st,pins {
- sda = <&PIO9 3 ALT1 BIDIR>;
- scl = <&PIO9 2 ALT1 BIDIR>;
+ sda = <&pio9 3 ALT1 BIDIR>;
+ scl = <&pio9 2 ALT1 BIDIR>;
+ };
+ };
+ };
+
+ usb {
+ pinctrl_usb0: usb0 {
+ st,pins {
+ oc-detect = <&pio9 4 ALT1 IN>;
+ pwr-enable = <&pio9 5 ALT1 OUT>;
};
};
};
+
i2c1 {
pinctrl_i2c1_default: i2c1-default {
st,pins {
- sda = <&PIO12 1 ALT1 BIDIR>;
- scl = <&PIO12 0 ALT1 BIDIR>;
+ sda = <&pio12 1 ALT1 BIDIR>;
+ scl = <&pio12 0 ALT1 BIDIR>;
};
};
};
fsm {
pinctrl_fsm: fsm {
st,pins {
- spi-fsm-clk = <&PIO12 2 ALT1 OUT>;
- spi-fsm-cs = <&PIO12 3 ALT1 OUT>;
- spi-fsm-mosi = <&PIO12 4 ALT1 OUT>;
- spi-fsm-miso = <&PIO12 5 ALT1 IN>;
- spi-fsm-hol = <&PIO12 6 ALT1 OUT>;
- spi-fsm-wp = <&PIO12 7 ALT1 OUT>;
+ spi-fsm-clk = <&pio12 2 ALT1 OUT>;
+ spi-fsm-cs = <&pio12 3 ALT1 OUT>;
+ spi-fsm-mosi = <&pio12 4 ALT1 OUT>;
+ spi-fsm-miso = <&pio12 5 ALT1 IN>;
+ spi-fsm-hol = <&pio12 6 ALT1 OUT>;
+ spi-fsm-wp = <&pio12 7 ALT1 OUT>;
};
};
};
interrupt-names = "irqmux";
ranges = <0 0xfe820000 0x6000>;
- PIO13: gpio@fe820000 {
+ pio13: gpio@fe820000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0 0x100>;
st,bank-name = "PIO13";
};
- PIO14: gpio@fe821000 {
+ pio14: gpio@fe821000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x1000 0x100>;
st,bank-name = "PIO14";
};
- PIO15: gpio@fe822000 {
+ pio15: gpio@fe822000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x2000 0x100>;
st,bank-name = "PIO15";
};
- PIO16: gpio@fe823000 {
+ pio16: gpio@fe823000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x3000 0x100>;
st,bank-name = "PIO16";
};
- PIO17: gpio@fe824000 {
+ pio17: gpio@fe824000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x4000 0x100>;
st,bank-name = "PIO17";
};
- PIO18: gpio@fe825000 {
+ pio18: gpio@fe825000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
serial2 {
pinctrl_serial2: serial2-0 {
st,pins {
- tx = <&PIO17 4 ALT2 OUT>;
- rx = <&PIO17 5 ALT2 IN>;
+ tx = <&pio17 4 ALT2 OUT>;
+ rx = <&pio17 5 ALT2 IN>;
};
};
};
gmac0 {
pinctrl_mii0: mii0 {
st,pins {
- mdint = <&PIO13 6 ALT2 IN BYPASS 0>;
- txen = <&PIO13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- txd0 = <&PIO14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- txd1 = <&PIO14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- txd2 = <&PIO14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
- txd3 = <&PIO14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
-
- txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>;
- txer = <&PIO15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
- crs = <&PIO15 2 ALT2 IN BYPASS 1000>;
- col = <&PIO15 3 ALT2 IN BYPASS 1000>;
- mdio= <&PIO15 4 ALT2 OUT BYPASS 1500>;
- mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>;
-
- rxd0 = <&PIO16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxd1 = <&PIO16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxd2 = <&PIO16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxd3 = <&PIO16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxdv = <&PIO15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rx_er = <&PIO15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
- rxclk = <&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
- phyclk = <&PIO13 5 ALT2 OUT NICLK 0 CLK_B>;
+ mdint = <&pio13 6 ALT2 IN BYPASS 0>;
+ txen = <&pio13 7 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ txd0 = <&pio14 0 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ txd1 = <&pio14 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ txd2 = <&pio14 2 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
+ txd3 = <&pio14 3 ALT2 OUT SE_NICLK_IO 0 CLK_B>;
+
+ txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>;
+ txer = <&pio15 1 ALT2 OUT SE_NICLK_IO 0 CLK_A>;
+ crs = <&pio15 2 ALT2 IN BYPASS 1000>;
+ col = <&pio15 3 ALT2 IN BYPASS 1000>;
+ mdio= <&pio15 4 ALT2 OUT BYPASS 1500>;
+ mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>;
+
+ rxd0 = <&pio16 0 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxd1 = <&pio16 1 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxd2 = <&pio16 2 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxd3 = <&pio16 3 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxdv = <&pio15 6 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rx_er = <&pio15 7 ALT2 IN SE_NICLK_IO 0 CLK_A>;
+ rxclk = <&pio17 0 ALT2 IN NICLK 0 CLK_A>;
+ phyclk = <&pio13 5 ALT2 OUT NICLK 0 CLK_B>;
};
};
};
pinctrl_rgmii0: rgmii0 {
st,pins {
- phyclk = <&PIO13 5 ALT4 OUT NICLK 0 CLK_B>;
- txen = <&PIO13 7 ALT2 OUT DE_IO 0 CLK_A>;
- txd0 = <&PIO14 0 ALT2 OUT DE_IO 500 CLK_A>;
- txd1 = <&PIO14 1 ALT2 OUT DE_IO 500 CLK_A>;
- txd2 = <&PIO14 2 ALT2 OUT DE_IO 500 CLK_B>;
- txd3 = <&PIO14 3 ALT2 OUT DE_IO 500 CLK_B>;
- txclk = <&PIO15 0 ALT2 IN NICLK 0 CLK_A>;
-
- mdio = <&PIO15 4 ALT2 OUT BYPASS 0>;
- mdc = <&PIO15 5 ALT2 OUT NICLK 0 CLK_B>;
-
- rxdv = <&PIO15 6 ALT2 IN DE_IO 500 CLK_A>;
- rxd0 =<&PIO16 0 ALT2 IN DE_IO 500 CLK_A>;
- rxd1 =<&PIO16 1 ALT2 IN DE_IO 500 CLK_A>;
- rxd2 =<&PIO16 2 ALT2 IN DE_IO 500 CLK_A>;
- rxd3 =<&PIO16 3 ALT2 IN DE_IO 500 CLK_A>;
- rxclk =<&PIO17 0 ALT2 IN NICLK 0 CLK_A>;
-
- clk125=<&PIO17 6 ALT1 IN NICLK 0 CLK_A>;
+ phyclk = <&pio13 5 ALT4 OUT NICLK 0 CLK_B>;
+ txen = <&pio13 7 ALT2 OUT DE_IO 0 CLK_A>;
+ txd0 = <&pio14 0 ALT2 OUT DE_IO 500 CLK_A>;
+ txd1 = <&pio14 1 ALT2 OUT DE_IO 500 CLK_A>;
+ txd2 = <&pio14 2 ALT2 OUT DE_IO 500 CLK_B>;
+ txd3 = <&pio14 3 ALT2 OUT DE_IO 500 CLK_B>;
+ txclk = <&pio15 0 ALT2 IN NICLK 0 CLK_A>;
+
+ mdio = <&pio15 4 ALT2 OUT BYPASS 0>;
+ mdc = <&pio15 5 ALT2 OUT NICLK 0 CLK_B>;
+
+ rxdv = <&pio15 6 ALT2 IN DE_IO 500 CLK_A>;
+ rxd0 =<&pio16 0 ALT2 IN DE_IO 500 CLK_A>;
+ rxd1 =<&pio16 1 ALT2 IN DE_IO 500 CLK_A>;
+ rxd2 =<&pio16 2 ALT2 IN DE_IO 500 CLK_A>;
+ rxd3 =<&pio16 3 ALT2 IN DE_IO 500 CLK_A>;
+ rxclk =<&pio17 0 ALT2 IN NICLK 0 CLK_A>;
+
+ clk125=<&pio17 6 ALT1 IN NICLK 0 CLK_A>;
+ };
+ };
+ };
+
+ mmc0 {
+ pinctrl_mmc0: mmc0 {
+ st,pins {
+ mmcclk = <&pio13 4 ALT4 BIDIR_PU NICLK 0 CLK_B>;
+ data0 = <&pio14 4 ALT4 BIDIR_PU BYPASS 0>;
+ data1 = <&pio14 5 ALT4 BIDIR_PU BYPASS 0>;
+ data2 = <&pio14 6 ALT4 BIDIR_PU BYPASS 0>;
+ data3 = <&pio14 7 ALT4 BIDIR_PU BYPASS 0>;
+ cmd = <&pio15 1 ALT4 BIDIR_PU BYPASS 0>;
+ wp = <&pio15 3 ALT4 IN>;
+ data4 = <&pio16 4 ALT4 BIDIR_PU BYPASS 0>;
+ data5 = <&pio16 5 ALT4 BIDIR_PU BYPASS 0>;
+ data6 = <&pio16 6 ALT4 BIDIR_PU BYPASS 0>;
+ data7 = <&pio16 7 ALT4 BIDIR_PU BYPASS 0>;
+ pwr = <&pio17 1 ALT4 OUT>;
+ cd = <&pio17 2 ALT4 IN>;
+ led = <&pio17 3 ALT4 OUT>;
+ };
+ };
+ };
+ mmc1 {
+ pinctrl_mmc1: mmc1 {
+ st,pins {
+ mmcclk = <&pio15 0 ALT3 BIDIR_PU NICLK 0 CLK_B>;
+ data0 = <&pio13 7 ALT3 BIDIR_PU BYPASS 0>;
+ data1 = <&pio14 1 ALT3 BIDIR_PU BYPASS 0>;
+ data2 = <&pio14 2 ALT3 BIDIR_PU BYPASS 0>;
+ data3 = <&pio14 3 ALT3 BIDIR_PU BYPASS 0>;
+ cmd = <&pio15 4 ALT3 BIDIR_PU BYPASS 0>;
+ data4 = <&pio15 6 ALT3 BIDIR_PU BYPASS 0>;
+ data5 = <&pio15 7 ALT3 BIDIR_PU BYPASS 0>;
+ data6 = <&pio16 0 ALT3 BIDIR_PU BYPASS 0>;
+ data7 = <&pio16 1 ALT3 BIDIR_PU BYPASS 0>;
+ pwr = <&pio16 2 ALT3 OUT>;
+ nreset = <&pio13 6 ALT3 OUT>;
+ };
+ };
+ };
+
+ usb {
+ pinctrl_usb1: usb1 {
+ st,pins {
+ oc-detect = <&pio18 0 ALT1 IN>;
+ pwr-enable = <&pio18 1 ALT1 OUT>;
+ };
+ };
+ pinctrl_usb2: usb2 {
+ st,pins {
+ oc-detect = <&pio18 2 ALT1 IN>;
+ pwr-enable = <&pio18 3 ALT1 OUT>;
};
};
};
interrupt-names = "irqmux";
ranges = <0 0xfd6b0000 0x3000>;
- PIO100: gpio@fd6b0000 {
+ pio100: gpio@fd6b0000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0 0x100>;
st,bank-name = "PIO100";
};
- PIO101: gpio@fd6b1000 {
+ pio101: gpio@fd6b1000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x1000 0x100>;
st,bank-name = "PIO101";
};
- PIO102: gpio@fd6b2000 {
+ pio102: gpio@fd6b2000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
interrupt-names = "irqmux";
ranges = <0 0xfd330000 0x5000>;
- PIO103: gpio@fd330000 {
+ pio103: gpio@fd330000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0 0x100>;
st,bank-name = "PIO103";
};
- PIO104: gpio@fd331000 {
+ pio104: gpio@fd331000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x1000 0x100>;
st,bank-name = "PIO104";
};
- PIO105: gpio@fd332000 {
+ pio105: gpio@fd332000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
reg = <0x2000 0x100>;
st,bank-name = "PIO105";
};
- PIO106: gpio@fd333000 {
+ pio106: gpio@fd333000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
st,bank-name = "PIO106";
};
- PIO107: gpio@fd334000 {
+ pio107: gpio@fd334000 {
gpio-controller;
#gpio-cells = <1>;
interrupt-controller;
#include "stih41x.dtsi"
#include "stih416-clock.dtsi"
#include "stih416-pinctrl.dtsi"
+
+#include <dt-bindings/phy/phy-miphy365x.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include <dt-bindings/reset-controller/stih416-resets.h>
/ {
resets = <&powerdown STIH416_KEYSCAN_POWERDOWN>,
<&softreset STIH416_KEYSCAN_SOFTRESET>;
};
+
+ temp0 {
+ compatible = "st,stih416-sas-thermal";
+ clock-names = "thermal";
+ clocks = <&clockgen_c_vcc 14>;
+
+ status = "okay";
+ };
+
+ temp1@fdfe8000 {
+ compatible = "st,stih416-mpe-thermal";
+ reg = <0xfdfe8000 0x10>;
+ clocks = <&clockgen_e 3>;
+ clock-names = "thermal";
+ interrupts = <GIC_SPI 23 IRQ_TYPE_EDGE_RISING>;
+
+ status = "okay";
+ };
+
+ mmc0: sdhci@fe81e000 {
+ compatible = "st,sdhci";
+ status = "disabled";
+ reg = <0xfe81e000 0x1000>;
+ interrupts = <GIC_SPI 127 IRQ_TYPE_NONE>;
+ interrupt-names = "mmcirq";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc0>;
+ clock-names = "mmc";
+ clocks = <&clk_s_a1_ls 1>;
+ };
+
+ mmc1: sdhci@fe81f000 {
+ compatible = "st,sdhci";
+ status = "disabled";
+ reg = <0xfe81f000 0x1000>;
+ interrupts = <GIC_SPI 128 IRQ_TYPE_NONE>;
+ interrupt-names = "mmcirq";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mmc1>;
+ clock-names = "mmc";
+ clocks = <&clk_s_a1_ls 8>;
+ };
+
+ miphy365x_phy: phy@fe382000 {
+ compatible = "st,miphy365x-phy";
+ st,syscfg = <&syscfg_rear>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ phy_port0: port@fe382000 {
+ #phy-cells = <1>;
+ reg = <0xfe382000 0x100>, <0xfe394000 0x100>, <0x824 0x4>;
+ reg-names = "sata", "pcie", "syscfg";
+ };
+
+ phy_port1: port@fe38a000 {
+ #phy-cells = <1>;
+ reg = <0xfe38a000 0x100>, <0xfe804000 0x100>, <0x828 0x4>;
+ reg-names = "sata", "pcie", "syscfg";
+ };
+ };
+
+ sata0: sata@fe380000 {
+ compatible = "st,sti-ahci";
+ reg = <0xfe380000 0x1000>;
+ interrupts = <GIC_SPI 157 IRQ_TYPE_NONE>;
+ interrupt-names = "hostc";
+ phys = <&phy_port0 MIPHY_TYPE_SATA>;
+ phy-names = "sata-phy";
+ resets = <&powerdown STIH416_SATA0_POWERDOWN>,
+ <&softreset STIH416_SATA0_SOFTRESET>;
+ reset-names = "pwr-dwn", "sw-rst";
+ clock-names = "ahci_clk";
+ clocks = <&clk_s_a0_ls CLK_ICN_REG>;
+
+ status = "disabled";
+ };
+
+ usb2_phy: phy@0 {
+ compatible = "st,stih416-usb-phy";
+ #phy-cells = <0>;
+ st,syscfg = <&syscfg_rear>;
+ clocks = <&clk_sysin>;
+ clock-names = "osc_phy";
+ };
+
+ ehci0: usb@fe1ffe00 {
+ compatible = "st,st-ehci-300x";
+ reg = <0xfe1ffe00 0x100>;
+ interrupts = <GIC_SPI 148 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb0>;
+ clocks = <&clk_s_a1_ls 0>,
+ <&clockgen_b0 0>;
+ clock-names = "ic", "clk48";
+ phys = <&usb2_phy>;
+ phy-names = "usb";
+ resets = <&powerdown STIH416_USB0_POWERDOWN>,
+ <&softreset STIH416_USB0_SOFTRESET>;
+ reset-names = "power", "softreset";
+ };
+
+ ohci0: usb@fe1ffc00 {
+ compatible = "st,st-ohci-300x";
+ reg = <0xfe1ffc00 0x100>;
+ interrupts = <GIC_SPI 149 IRQ_TYPE_NONE>;
+ clocks = <&clk_s_a1_ls 0>,
+ <&clockgen_b0 0>;
+ clock-names = "ic", "clk48";
+ phys = <&usb2_phy>;
+ phy-names = "usb";
+ status = "okay";
+ resets = <&powerdown STIH416_USB0_POWERDOWN>,
+ <&softreset STIH416_USB0_SOFTRESET>;
+ reset-names = "power", "softreset";
+ };
+
+ ehci1: usb@fe203e00 {
+ compatible = "st,st-ehci-300x";
+ reg = <0xfe203e00 0x100>;
+ interrupts = <GIC_SPI 150 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb1>;
+ clocks = <&clk_s_a1_ls 0>,
+ <&clockgen_b0 0>;
+ clock-names = "ic", "clk48";
+ phys = <&usb2_phy>;
+ phy-names = "usb";
+ resets = <&powerdown STIH416_USB1_POWERDOWN>,
+ <&softreset STIH416_USB1_SOFTRESET>;
+ reset-names = "power", "softreset";
+ };
+
+ ohci1: usb@fe203c00 {
+ compatible = "st,st-ohci-300x";
+ reg = <0xfe203c00 0x100>;
+ interrupts = <GIC_SPI 151 IRQ_TYPE_NONE>;
+ clocks = <&clk_s_a1_ls 0>,
+ <&clockgen_b0 0>;
+ clock-names = "ic", "clk48";
+ phys = <&usb2_phy>;
+ phy-names = "usb";
+ resets = <&powerdown STIH416_USB1_POWERDOWN>,
+ <&softreset STIH416_USB1_SOFTRESET>;
+ reset-names = "power", "softreset";
+ };
+
+ ehci2: usb@fe303e00 {
+ compatible = "st,st-ehci-300x";
+ reg = <0xfe303e00 0x100>;
+ interrupts = <GIC_SPI 152 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb2>;
+ clocks = <&clk_s_a1_ls 0>,
+ <&clockgen_b0 0>;
+ clock-names = "ic", "clk48";
+ phys = <&usb2_phy>;
+ phy-names = "usb";
+ resets = <&powerdown STIH416_USB2_POWERDOWN>,
+ <&softreset STIH416_USB2_SOFTRESET>;
+ reset-names = "power", "softreset";
+ };
+
+ ohci2: usb@fe303c00 {
+ compatible = "st,st-ohci-300x";
+ reg = <0xfe303c00 0x100>;
+ interrupts = <GIC_SPI 153 IRQ_TYPE_NONE>;
+ clocks = <&clk_s_a1_ls 0>,
+ <&clockgen_b0 0>;
+ clock-names = "ic", "clk48";
+ phys = <&usb2_phy>;
+ phy-names = "usb";
+ resets = <&powerdown STIH416_USB2_POWERDOWN>,
+ <&softreset STIH416_USB2_SOFTRESET>;
+ reset-names = "power", "softreset";
+ };
+
+ ehci3: usb@fe343e00 {
+ compatible = "st,st-ehci-300x";
+ reg = <0xfe343e00 0x100>;
+ interrupts = <GIC_SPI 154 IRQ_TYPE_NONE>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb3>;
+ clocks = <&clk_s_a1_ls 0>,
+ <&clockgen_b0 0>;
+ clock-names = "ic", "clk48";
+ phys = <&usb2_phy>;
+ phy-names = "usb";
+ resets = <&powerdown STIH416_USB3_POWERDOWN>,
+ <&softreset STIH416_USB3_SOFTRESET>;
+ reset-names = "power", "softreset";
+ };
+
+ ohci3: usb@fe343c00 {
+ compatible = "st,st-ohci-300x";
+ reg = <0xfe343c00 0x100>;
+ interrupts = <GIC_SPI 155 IRQ_TYPE_NONE>;
+ clocks = <&clk_s_a1_ls 0>,
+ <&clockgen_b0 0>;
+ clock-names = "ic", "clk48";
+ phys = <&usb2_phy>;
+ phy-names = "usb";
+ resets = <&powerdown STIH416_USB3_POWERDOWN>,
+ <&softreset STIH416_USB3_SOFTRESET>;
+ reset-names = "power", "softreset";
+ };
};
};
fp_led {
#gpio-cells = <1>;
label = "Front Panel LED";
- gpios = <&PIO105 7>;
+ gpios = <&pio105 7>;
linux,default-trigger = "heartbeat";
};
};
phy-mode = "mii";
pinctrl-0 = <&pinctrl_mii0>;
- snps,reset-gpio = <&PIO106 2>;
+ snps,reset-gpio = <&pio106 2>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 10000>;
};
phy-mode = "mii";
st,tx-retime-src = "txclk";
- snps,reset-gpio = <&PIO4 7>;
+ snps,reset-gpio = <&pio4 7>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 10000>;
};
red {
#gpio-cells = <1>;
label = "Front Panel LED";
- gpios = <&PIO4 1>;
+ gpios = <&pio4 1>;
linux,default-trigger = "heartbeat";
};
green {
- gpios = <&PIO4 7>;
+ gpios = <&pio4 7>;
default-state = "off";
};
};
phy-mode = "rgmii-id";
max-speed = <1000>;
st,tx-retime-src = "clk_125";
- snps,reset-gpio = <&PIO3 0>;
+ snps,reset-gpio = <&pio3 0>;
snps,reset-active-low;
snps,reset-delays-us = <0 10000 10000>;
pinctrl-0 = <&pinctrl_rgmii1>;
};
+
+ mmc0: sdhci@fe81e000 {
+ bus-width = <8>;
+ };
};
};
*/
/ {
soc {
+ mmc0: sdhci@fe81e000 {
+ status = "okay";
+ };
+
spifsm: spifsm@fe902000 {
#address-cells = <1>;
#size-cells = <1>;
--- /dev/null
+/*
+ * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+/ {
+ soc {
+ sbc_serial0: serial@9530000 {
+ status = "okay";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ red {
+ #gpio-cells = <2>;
+ label = "Front Panel LED";
+ gpios = <&pio4 1 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ green {
+ #gpio-cells = <2>;
+ gpios = <&pio1 3 0>;
+ default-state = "off";
+ };
+ };
+
+ i2c@9842000 {
+ status = "okay";
+ };
+
+ i2c@9843000 {
+ status = "okay";
+ };
+
+ i2c@9844000 {
+ status = "okay";
+ };
+
+ i2c@9845000 {
+ status = "okay";
+ };
+
+ i2c@9540000 {
+ status = "okay";
+ };
+
+ /* SSC11 to HDMI */
+ i2c@9541000 {
+ status = "okay";
+ /* HDMI V1.3a supports Standard mode only */
+ clock-frequency = <100000>;
+ st,i2c-min-scl-pulse-width-us = <0>;
+ st,i2c-min-sda-pulse-width-us = <5>;
+ };
+ };
+};
*
* Emilio López <emilio@elopez.com.ar>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
/*
* Copyright 2014 Hans de Goede <hdegoede@redhat.com>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
* Copyright 2012 Stefan Roese
* Stefan Roese <sr@denx.de>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
*
* David Lanzendörfer <david.lanzendoerfer@o2s.ch>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
/*
* Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
* Copyright 2014 Zoltan HERPAI
* Zoltan HERPAI <wigyori@uid0.hu>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
serial7 = &uart7;
};
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer@0 {
+ compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0-hdmi";
+ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+ <&ahb_gates 44>;
+ status = "disabled";
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
/*
* Copyright 2014 Hans de Goede <hdegoede@redhat.com>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
serial3 = &uart3;
};
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer@0 {
+ compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0-hdmi";
+ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+ <&ahb_gates 44>;
+ status = "disabled";
+ };
+ };
+
cpus {
cpu@0 {
compatible = "arm,cortex-a8";
* licensing only applies to this file, and not this project as a
* whole.
*
- * a) This library is free software; you can redistribute it and/or
+ * a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This library is distributed in the hope that it will be useful,
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
+ * License along with this file; if not, write to the Free
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*
/*
- * Copyright 2012 Maxime Ripard
+ * Copyright 2012 Maxime Ripard <maxime.ripard@free-electrons.com>
* Copyright 2013 Hans de Goede <hdegoede@redhat.com>
*
- * Maxime Ripard <maxime.ripard@free-electrons.com>
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
*
* Boris Brezillon <boris.brezillon@free-electrons.com>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
*
* Maxime Ripard <maxime.ripard@free-electrons.com>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
/*
* Copyright 2014 Hans de Goede <hdegoede@redhat.com>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
status = "okay";
};
+ usbphy: phy@01c19400 {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ status = "okay";
+ };
+
+ ehci0: usb@01c1a000 {
+ status = "okay";
+ };
+
+ ehci1: usb@01c1b000 {
+ status = "okay";
+ };
+
pio: pinctrl@01c20800 {
+ led_pins_m9: led_pins@0 {
+ allwinner,pins = "PH13";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
mmc0_cd_pin_m9: mmc0_cd_pin@0 {
allwinner,pins = "PH22";
allwinner,function = "gpio_in";
allwinner,drive = <0>;
allwinner,pull = <1>;
};
+
+ usb1_vbus_pin_m9: usb1_vbus_pin@0 {
+ allwinner,pins = "PC27";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
};
uart0: serial@01c28000 {
pinctrl-0 = <&uart0_pins_a>;
status = "okay";
};
+
+ gmac: ethernet@01c30000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_m9>;
+
+ blue {
+ label = "m9:blue:usr";
+ gpios = <&pio 7 13 0>;
+ };
+ };
+
+ reg_usb1_vbus: usb1-vbus {
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb1_vbus_pin_m9>;
+ gpio = <&pio 2 27 0>;
+ status = "okay";
};
};
* licensing only applies to this file, and not this project as a
* whole.
*
- * a) This library is free software; you can redistribute it and/or
+ * a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This library is distributed in the hope that it will be useful,
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
+ * License along with this file; if not, write to the Free
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*
ethernet0 = &gmac;
};
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer@0 {
+ compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0-hdmi";
+ clocks = <&pll6 0>;
+ status = "disabled";
+ };
+ };
cpus {
enable-method = "allwinner,sun6i-a31";
};
pll6: clk@01c20028 {
- #clock-cells = <0>;
+ #clock-cells = <1>;
compatible = "allwinner,sun6i-a31-pll6-clk";
reg = <0x01c20028 0x4>;
clocks = <&osc24M>;
- clock-output-names = "pll6";
+ clock-output-names = "pll6", "pll6x2";
};
cpu: cpu@01c20050 {
#clock-cells = <0>;
compatible = "allwinner,sun6i-a31-ahb1-mux-clk";
reg = <0x01c20054 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6>;
+ clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>;
clock-output-names = "ahb1_mux";
};
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-apb1-mux-clk";
reg = <0x01c20058 0x4>;
- clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
+ clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
clock-output-names = "apb2_mux";
};
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20088 0x4>;
- clocks = <&osc24M>, <&pll6>;
+ clocks = <&osc24M>, <&pll6 0>;
clock-output-names = "mmc0";
};
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c2008c 0x4>;
- clocks = <&osc24M>, <&pll6>;
+ clocks = <&osc24M>, <&pll6 0>;
clock-output-names = "mmc1";
};
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20090 0x4>;
- clocks = <&osc24M>, <&pll6>;
+ clocks = <&osc24M>, <&pll6 0>;
clock-output-names = "mmc2";
};
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c20094 0x4>;
- clocks = <&osc24M>, <&pll6>;
+ clocks = <&osc24M>, <&pll6 0>;
clock-output-names = "mmc3";
};
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200a0 0x4>;
- clocks = <&osc24M>, <&pll6>;
+ clocks = <&osc24M>, <&pll6 0>;
clock-output-names = "spi0";
};
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200a4 0x4>;
- clocks = <&osc24M>, <&pll6>;
+ clocks = <&osc24M>, <&pll6 0>;
clock-output-names = "spi1";
};
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200a8 0x4>;
- clocks = <&osc24M>, <&pll6>;
+ clocks = <&osc24M>, <&pll6 0>;
clock-output-names = "spi2";
};
#clock-cells = <0>;
compatible = "allwinner,sun4i-a10-mod0-clk";
reg = <0x01c200ac 0x4>;
- clocks = <&osc24M>, <&pll6>;
+ clocks = <&osc24M>, <&pll6 0>;
clock-output-names = "spi3";
};
clocks = <&ahb1_gates 6>;
resets = <&ahb1_rst 6>;
#dma-cells = <1>;
+
+ /* DMA controller requires AHB1 clocked from PLL6 */
+ assigned-clocks = <&ahb1_mux>;
+ assigned-clock-parents = <&pll6 0>;
};
mmc0: mmc@01c0f000 {
ar100: ar100_clk {
compatible = "allwinner,sun6i-a31-ar100-clk";
#clock-cells = <0>;
- clocks = <&osc32k>, <&osc24M>, <&pll6>, <&pll6>;
+ clocks = <&osc32k>, <&osc24M>, <&pll6 0>, <&pll6 0>;
clock-output-names = "ar100";
};
--- /dev/null
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "sun7i-a20.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+ model = "LeMaker Banana Pi";
+ compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
+
+ soc@01c00000 {
+ spi0: spi@01c05000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&spi0_pins_a>;
+ status = "okay";
+ };
+
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 10 0>; /* PH10 */
+ cd-inverted;
+ status = "okay";
+ };
+
+ usbphy: phy@01c13400 {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+ };
+
+ ehci0: usb@01c14000 {
+ status = "okay";
+ };
+
+ ohci0: usb@01c14400 {
+ status = "okay";
+ };
+
+ ahci: sata@01c18000 {
+ status = "okay";
+ };
+
+ ehci1: usb@01c1c000 {
+ status = "okay";
+ };
+
+ ohci1: usb@01c1c400 {
+ status = "okay";
+ };
+
+ pinctrl@01c20800 {
+ mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
+ allwinner,pins = "PH10";
+ allwinner,function = "gpio_in";
+ allwinner,drive = <0>;
+ allwinner,pull = <1>;
+ };
+
+ gmac_power_pin_bananapi: gmac_power_pin@0 {
+ allwinner,pins = "PH23";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ led_pins_bananapi: led_pins@0 {
+ allwinner,pins = "PH24";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+ };
+
+ ir0: ir@01c21800 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_pins_a>;
+ status = "okay";
+ };
+
+ uart0: serial@01c28000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+ };
+
+ uart3: serial@01c28c00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart3_pins_b>;
+ status = "okay";
+ };
+
+ uart7: serial@01c29c00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart7_pins_a>;
+ status = "okay";
+ };
+
+ i2c0: i2c@01c2ac00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 8>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ i2c2: i2c@01c2b400 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c2_pins_a>;
+ status = "okay";
+ };
+
+ gmac: ethernet@01c50000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ phy-supply = <®_gmac_3v3>;
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_bananapi>;
+
+ green {
+ label = "bananapi:green:usr";
+ gpios = <&pio 7 24 0>;
+ };
+ };
+
+ reg_usb1_vbus: usb1-vbus {
+ status = "okay";
+ };
+
+ reg_usb2_vbus: usb2-vbus {
+ status = "okay";
+ };
+
+ reg_gmac_3v3: gmac-3v3 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_power_pin_bananapi>;
+ regulator-name = "gmac-3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100000>;
+ enable-active-high;
+ gpio = <&pio 7 23 0>;
+ };
+};
};
usbphy: phy@01c13400 {
+ usb0_vbus-supply = <®_usb0_vbus>;
usb1_vbus-supply = <®_usb1_vbus>;
usb2_vbus-supply = <®_usb2_vbus>;
status = "okay";
allwinner,drive = <0>;
allwinner,pull = <0>;
};
+
+ usb0_vbus_pin_a: usb0_vbus_pin@0 {
+ allwinner,pins = "PH17";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
};
pwm: pwm@01c20e00 {
status = "okay";
};
+ reg_usb0_vbus: usb0-vbus {
+ pinctrl-0 = <&usb0_vbus_pin_a>;
+ gpio = <&pio 7 17 0>;
+ status = "okay";
+ };
+
reg_usb1_vbus: usb1-vbus {
status = "okay";
};
/*
* Copyright 2014 Hans de Goede <hdegoede@redhat.com>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
--- /dev/null
+/*
+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
+ *
+ * Hans de Goede <hdegoede@redhat.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "sun7i-a20.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+ model = "Mele M3";
+ compatible = "mele,m3", "allwinner,sun7i-a20";
+
+ soc@01c00000 {
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+ };
+
+ mmc2: mmc@01c11000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc2_pins_a>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+ };
+
+ usbphy: phy@01c13400 {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+ };
+
+ ehci0: usb@01c14000 {
+ status = "okay";
+ };
+
+ ohci0: usb@01c14400 {
+ status = "okay";
+ };
+
+ ehci1: usb@01c1c000 {
+ status = "okay";
+ };
+
+ ohci1: usb@01c1c400 {
+ status = "okay";
+ };
+
+ pinctrl@01c20800 {
+ led_pins_m3: led_pins@0 {
+ allwinner,pins = "PH20";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+ };
+
+ ir0: ir@01c21800 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ir0_pins_a>;
+ status = "okay";
+ };
+
+ uart0: serial@01c28000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+ };
+
+ i2c0: i2c@01c2ac00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 8>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+ };
+
+ gmac: ethernet@01c50000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_mii_a>;
+ phy = <&phy1>;
+ phy-mode = "mii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_m3>;
+
+ blue {
+ label = "m3:blue:usr";
+ gpios = <&pio 7 20 0>;
+ };
+ };
+
+ reg_usb1_vbus: usb1-vbus {
+ status = "okay";
+ };
+
+ reg_usb2_vbus: usb2-vbus {
+ status = "okay";
+ };
+};
* Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
* Copyright (c) 2014 FUKAUMI Naoki <naobsd@gmail.com>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
--- /dev/null
+/*
+ * Copyright 2014 - Iain Paton <ipaton0@gmail.com>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "sun7i-a20.dtsi"
+/include/ "sunxi-common-regulators.dtsi"
+
+/ {
+ model = "Olimex A20-OLinuXino-LIME2";
+ compatible = "olimex,a20-olinuxino-lime2", "allwinner,sun7i-a20";
+
+ soc@01c00000 {
+ mmc0: mmc@01c0f000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <®_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 0>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+ };
+
+ usbphy: phy@01c13400 {
+ usb1_vbus-supply = <®_usb1_vbus>;
+ usb2_vbus-supply = <®_usb2_vbus>;
+ status = "okay";
+ };
+
+ ehci0: usb@01c14000 {
+ status = "okay";
+ };
+
+ ohci0: usb@01c14400 {
+ status = "okay";
+ };
+
+ ahci: sata@01c18000 {
+ target-supply = <®_ahci_5v>;
+ status = "okay";
+ };
+
+ ehci1: usb@01c1c000 {
+ status = "okay";
+ };
+
+ ohci1: usb@01c1c400 {
+ status = "okay";
+ };
+
+ pinctrl@01c20800 {
+ ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+ allwinner,pins = "PC3";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ led_pins_olinuxinolime: led_pins@0 {
+ allwinner,pins = "PH2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <1>;
+ allwinner,pull = <0>;
+ };
+ };
+
+ uart0: serial@01c28000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+ };
+
+ i2c0: i2c@01c2ac00 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
+
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupt-parent = <&nmi_intc>;
+ interrupts = <0 8>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ acin-supply = <®_axp_ipsout>;
+ vin2-supply = <®_axp_ipsout>;
+ vin3-supply = <®_axp_ipsout>;
+ ldo24in-supply = <®_axp_ipsout>;
+ ldo3in-supply = <®_axp_ipsout>;
+
+ regulators {
+ vdd_rtc: ldo1 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ regulator-always-on;
+ };
+
+ avcc: ldo2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vcc_csi0: ldo3 {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <3500000>;
+ regulator-always-on;
+ };
+
+ vcc_csi1: ldo4 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vdd_cpu: dcdc2 {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <2275000>;
+ regulator-always-on;
+ };
+
+ vdd_int: dcdc3 {
+ regulator-min-microvolt = <700000>;
+ regulator-max-microvolt = <3500000>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
+ i2c1: i2c@01c2b000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins_a>;
+ status = "okay";
+ };
+
+ gmac: ethernet@01c50000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&gmac_pins_rgmii_a>;
+ phy = <&phy1>;
+ phy-mode = "rgmii";
+ status = "okay";
+
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_olinuxinolime>;
+
+ green {
+ label = "a20-olinuxino-lime2:green:usr";
+ gpios = <&pio 7 2 0>;
+ default-state = "on";
+ };
+ };
+
+ reg_ahci_5v: ahci-5v {
+ pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
+ gpio = <&pio 2 3 0>;
+ status = "okay";
+ };
+
+ reg_usb1_vbus: usb1-vbus {
+ status = "okay";
+ };
+
+ reg_usb2_vbus: usb2-vbus {
+ status = "okay";
+ };
+
+ reg_axp_ipsout: axp_ipsout {
+ compatible = "regulator-fixed";
+ regulator-name = "axp-ipsout";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+};
* Copyright 2014 Zoltan HERPAI
* Zoltan HERPAI <wigyori@uid0.hu>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
* licensing only applies to this file, and not this project as a
* whole.
*
- * a) This library is free software; you can redistribute it and/or
+ * a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This library is distributed in the hope that it will be useful,
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
+ * License along with this file; if not, write to the Free
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*
serial7 = &uart7;
};
+ chosen {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ framebuffer@0 {
+ compatible = "allwinner,simple-framebuffer", "simple-framebuffer";
+ allwinner,pipeline = "de_be0-lcd0-hdmi";
+ clocks = <&pll5 1>, <&ahb_gates 36>, <&ahb_gates 43>,
+ <&ahb_gates 44>;
+ status = "disabled";
+ };
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
reg-names = "phy_ctrl", "pmu1", "pmu2";
clocks = <&usb_clk 8>;
clock-names = "usb_phy";
- resets = <&usb_clk 1>, <&usb_clk 2>;
- reset-names = "usb1_reset", "usb2_reset";
+ resets = <&usb_clk 0>, <&usb_clk 1>, <&usb_clk 2>;
+ reset-names = "usb0_reset", "usb1_reset", "usb2_reset";
status = "disabled";
};
allwinner,pull = <0>;
};
+ uart3_pins_b: uart3@1 {
+ allwinner,pins = "PH0", "PH1";
+ allwinner,function = "uart3";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
uart4_pins_a: uart4@0 {
allwinner,pins = "PG10", "PG11";
allwinner,function = "uart4";
allwinner,pull = <0>;
};
+ spi0_pins_a: spi0@0 {
+ allwinner,pins = "PI10", "PI11", "PI12", "PI13", "PI14";
+ allwinner,function = "spi0";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
spi1_pins_a: spi1@0 {
allwinner,pins = "PI16", "PI17", "PI18", "PI19";
allwinner,function = "spi1";
allwinner,pull = <1>;
};
+ mmc2_pins_a: mmc2@0 {
+ allwinner,pins = "PC6","PC7","PC8","PC9","PC10","PC11";
+ allwinner,function = "mmc2";
+ allwinner,drive = <2>;
+ allwinner,pull = <1>;
+ };
+
mmc3_pins_a: mmc3@0 {
allwinner,pins = "PI4","PI5","PI6","PI7","PI8","PI9";
allwinner,function = "mmc3";
*
* Chen-Yu Tsai <wens@csie.org>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
* licensing only applies to this file, and not this project as a
* whole.
*
- * a) This library is free software; you can redistribute it and/or
+ * a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of the
* License, or (at your option) any later version.
*
- * This library is distributed in the hope that it will be useful,
+ * This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
+ * License along with this file; if not, write to the Free
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*
--- /dev/null
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+/include/ "sun9i-a80.dtsi"
+
+/ {
+ model = "Merrii A80 Optimus Board";
+ compatible = "merrii,a80-optimus", "allwinner,sun9i-a80";
+
+ chosen {
+ bootargs = "earlyprintk console=ttyS0,115200";
+ };
+
+ soc {
+ pio: pinctrl@06000800 {
+ i2c3_pins_a: i2c3@0 {
+ /* Enable internal pull-up */
+ allwinner,pull = <1>;
+ };
+
+ led_pins_optimus: led-pins@0 {
+ allwinner,pins = "PH0", "PH1";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ uart4_pins_a: uart4@0 {
+ /* Enable internal pull-up */
+ allwinner,pull = <1>;
+ };
+ };
+
+ uart0: serial@07000000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+ };
+
+ uart4: serial@07001000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart4_pins_a>;
+ status = "okay";
+ };
+
+ i2c3: i2c@07003400 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c3_pins_a>;
+ status = "okay";
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_optimus>;
+
+ /* The LED names match those found on the board */
+
+ led2 {
+ label = "optimus:led2:usr";
+ gpios = <&pio 7 1 0>;
+ };
+
+ /* led3 is on PM15, in R_PIO */
+
+ led4 {
+ label = "optimus:led4:usr";
+ gpios = <&pio 7 0 0>;
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/include/ "skeleton64.dtsi"
+
+/ {
+ interrupt-parent = <&gic>;
+
+ aliases {
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ serial6 = &r_uart;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0x0>;
+ };
+
+ cpu1: cpu@1 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0x1>;
+ };
+
+ cpu2: cpu@2 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0x2>;
+ };
+
+ cpu3: cpu@3 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <0x3>;
+ };
+
+ cpu4: cpu@100 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <0x100>;
+ };
+
+ cpu5: cpu@101 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <0x101>;
+ };
+
+ cpu6: cpu@102 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <0x102>;
+ };
+
+ cpu7: cpu@103 {
+ compatible = "arm,cortex-a15";
+ device_type = "cpu";
+ reg = <0x103>;
+ };
+ };
+
+ memory {
+ /* 8GB max. with LPAE */
+ reg = <0 0x20000000 0x02 0>;
+ };
+
+ clocks {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /*
+ * map 64 bit address range down to 32 bits,
+ * as the peripherals are all under 512MB.
+ */
+ ranges = <0 0 0 0x20000000>;
+
+ osc24M: osc24M_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ clock-output-names = "osc24M";
+ };
+
+ osc32k: osc32k_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <32768>;
+ clock-output-names = "osc32k";
+ };
+
+ pll4: clk@0600000c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun9i-a80-pll4-clk";
+ reg = <0x0600000c 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll4";
+ };
+
+ pll12: clk@0600002c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun9i-a80-pll4-clk";
+ reg = <0x0600002c 0x4>;
+ clocks = <&osc24M>;
+ clock-output-names = "pll12";
+ };
+
+ gt_clk: clk@0600005c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun9i-a80-gt-clk";
+ reg = <0x0600005c 0x4>;
+ clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>;
+ clock-output-names = "gt";
+ };
+
+ ahb0: clk@06000060 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun9i-a80-ahb-clk";
+ reg = <0x06000060 0x4>;
+ clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>;
+ clock-output-names = "ahb0";
+ };
+
+ ahb1: clk@06000064 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun9i-a80-ahb-clk";
+ reg = <0x06000064 0x4>;
+ clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>;
+ clock-output-names = "ahb1";
+ };
+
+ ahb2: clk@06000068 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun9i-a80-ahb-clk";
+ reg = <0x06000068 0x4>;
+ clocks = <>_clk>, <&pll4>, <&pll12>, <&pll12>;
+ clock-output-names = "ahb2";
+ };
+
+ apb0: clk@06000070 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun9i-a80-apb0-clk";
+ reg = <0x06000070 0x4>;
+ clocks = <&osc24M>, <&pll4>;
+ clock-output-names = "apb0";
+ };
+
+ apb1: clk@06000074 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun9i-a80-apb1-clk";
+ reg = <0x06000074 0x4>;
+ clocks = <&osc24M>, <&pll4>;
+ clock-output-names = "apb1";
+ };
+
+ cci400_clk: clk@06000078 {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun9i-a80-gt-clk";
+ reg = <0x06000078 0x4>;
+ clocks = <&osc24M>, <&pll4>, <&pll12>, <&pll12>;
+ clock-output-names = "cci400";
+ };
+
+ ahb0_gates: clk@06000580 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun9i-a80-ahb0-gates-clk";
+ reg = <0x06000580 0x4>;
+ clocks = <&ahb0>;
+ clock-output-names = "ahb0_fd", "ahb0_ve", "ahb0_gpu",
+ "ahb0_ss", "ahb0_sd", "ahb0_nand1",
+ "ahb0_nand0", "ahb0_sdram",
+ "ahb0_mipi_hsi", "ahb0_sata", "ahb0_ts",
+ "ahb0_spi0","ahb0_spi1", "ahb0_spi2",
+ "ahb0_spi3";
+ };
+
+ ahb1_gates: clk@06000584 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun9i-a80-ahb1-gates-clk";
+ reg = <0x06000584 0x4>;
+ clocks = <&ahb1>;
+ clock-output-names = "ahb1_usbotg", "ahb1_usbhci",
+ "ahb1_gmac", "ahb1_msgbox",
+ "ahb1_spinlock", "ahb1_hstimer",
+ "ahb1_dma";
+ };
+
+ ahb2_gates: clk@06000588 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun9i-a80-ahb2-gates-clk";
+ reg = <0x06000588 0x4>;
+ clocks = <&ahb2>;
+ clock-output-names = "ahb2_lcd0", "ahb2_lcd1",
+ "ahb2_edp", "ahb2_csi", "ahb2_hdmi",
+ "ahb2_de", "ahb2_mp", "ahb2_mipi_dsi";
+ };
+
+ apb0_gates: clk@06000590 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun9i-a80-apb0-gates-clk";
+ reg = <0x06000590 0x4>;
+ clocks = <&apb0>;
+ clock-output-names = "apb0_spdif", "apb0_pio",
+ "apb0_ac97", "apb0_i2s0", "apb0_i2s1",
+ "apb0_lradc", "apb0_gpadc", "apb0_twd",
+ "apb0_cirtx";
+ };
+
+ apb1_gates: clk@06000594 {
+ #clock-cells = <1>;
+ compatible = "allwinner,sun9i-a80-apb1-gates-clk";
+ reg = <0x06000594 0x4>;
+ clocks = <&apb1>;
+ clock-output-names = "apb1_i2c0", "apb1_i2c1",
+ "apb1_i2c2", "apb1_i2c3", "apb1_i2c4",
+ "apb1_uart0", "apb1_uart1",
+ "apb1_uart2", "apb1_uart3",
+ "apb1_uart4", "apb1_uart5";
+ };
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ /*
+ * map 64 bit address range down to 32 bits,
+ * as the peripherals are all under 512MB.
+ */
+ ranges = <0 0 0 0x20000000>;
+
+ gic: interrupt-controller@01c41000 {
+ compatible = "arm,cortex-a7-gic", "arm,cortex-a15-gic";
+ reg = <0x01c41000 0x1000>,
+ <0x01c42000 0x1000>,
+ <0x01c44000 0x2000>,
+ <0x01c46000 0x2000>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupts = <1 9 0xf04>;
+ };
+
+ ahb0_resets: reset@060005a0 {
+ #reset-cells = <1>;
+ compatible = "allwinner,sun6i-a31-clock-reset";
+ reg = <0x060005a0 0x4>;
+ };
+
+ ahb1_resets: reset@060005a4 {
+ #reset-cells = <1>;
+ compatible = "allwinner,sun6i-a31-clock-reset";
+ reg = <0x060005a4 0x4>;
+ };
+
+ ahb2_resets: reset@060005a8 {
+ #reset-cells = <1>;
+ compatible = "allwinner,sun6i-a31-clock-reset";
+ reg = <0x060005a8 0x4>;
+ };
+
+ apb0_resets: reset@060005b0 {
+ #reset-cells = <1>;
+ compatible = "allwinner,sun6i-a31-clock-reset";
+ reg = <0x060005b0 0x4>;
+ };
+
+ apb1_resets: reset@060005b4 {
+ #reset-cells = <1>;
+ compatible = "allwinner,sun6i-a31-clock-reset";
+ reg = <0x060005b4 0x4>;
+ };
+
+ timer@06000c00 {
+ compatible = "allwinner,sun4i-a10-timer";
+ reg = <0x06000c00 0xa0>;
+ interrupts = <0 18 4>,
+ <0 19 4>,
+ <0 20 4>,
+ <0 21 4>,
+ <0 22 4>,
+ <0 23 4>;
+
+ clocks = <&osc24M>;
+ };
+
+ pio: pinctrl@06000800 {
+ compatible = "allwinner,sun9i-a80-pinctrl";
+ reg = <0x06000800 0x400>;
+ interrupts = <0 11 4>,
+ <0 15 4>,
+ <0 16 4>,
+ <0 17 4>,
+ <0 120 4>;
+ clocks = <&apb0_gates 5>;
+ gpio-controller;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ #size-cells = <0>;
+ #gpio-cells = <3>;
+
+ i2c3_pins_a: i2c3@0 {
+ allwinner,pins = "PG10", "PG11";
+ allwinner,function = "i2c3";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ uart0_pins_a: uart0@0 {
+ allwinner,pins = "PH12", "PH13";
+ allwinner,function = "uart0";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
+ uart4_pins_a: uart4@0 {
+ allwinner,pins = "PG12", "PG13", "PG14", "PG15";
+ allwinner,function = "uart4";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+ };
+
+ uart0: serial@07000000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x07000000 0x400>;
+ interrupts = <0 0 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb1_gates 16>;
+ resets = <&apb1_resets 16>;
+ status = "disabled";
+ };
+
+ uart1: serial@07000400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x07000400 0x400>;
+ interrupts = <0 1 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb1_gates 17>;
+ resets = <&apb1_resets 17>;
+ status = "disabled";
+ };
+
+ uart2: serial@07000800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x07000800 0x400>;
+ interrupts = <0 2 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb1_gates 18>;
+ resets = <&apb1_resets 18>;
+ status = "disabled";
+ };
+
+ uart3: serial@07000c00 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x07000c00 0x400>;
+ interrupts = <0 3 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb1_gates 19>;
+ resets = <&apb1_resets 19>;
+ status = "disabled";
+ };
+
+ uart4: serial@07001000 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x07001000 0x400>;
+ interrupts = <0 4 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb1_gates 20>;
+ resets = <&apb1_resets 20>;
+ status = "disabled";
+ };
+
+ uart5: serial@07001400 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x07001400 0x400>;
+ interrupts = <0 5 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&apb1_gates 21>;
+ resets = <&apb1_resets 21>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@07002800 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x07002800 0x400>;
+ interrupts = <0 6 4>;
+ clocks = <&apb1_gates 0>;
+ resets = <&apb1_resets 0>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c1: i2c@07002c00 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x07002c00 0x400>;
+ interrupts = <0 7 4>;
+ clocks = <&apb1_gates 1>;
+ resets = <&apb1_resets 1>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c2: i2c@07003000 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x07003000 0x400>;
+ interrupts = <0 8 4>;
+ clocks = <&apb1_gates 2>;
+ resets = <&apb1_resets 2>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c3: i2c@07003400 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x07003400 0x400>;
+ interrupts = <0 9 4>;
+ clocks = <&apb1_gates 3>;
+ resets = <&apb1_resets 3>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ i2c4: i2c@07003800 {
+ compatible = "allwinner,sun6i-a31-i2c";
+ reg = <0x07003800 0x400>;
+ interrupts = <0 10 4>;
+ clocks = <&apb1_gates 4>;
+ resets = <&apb1_resets 4>;
+ status = "disabled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ r_wdt: watchdog@08001000 {
+ compatible = "allwinner,sun6i-a31-wdt";
+ reg = <0x08001000 0x20>;
+ interrupts = <0 36 4>;
+ };
+
+ r_uart: serial@08002800 {
+ compatible = "snps,dw-apb-uart";
+ reg = <0x08002800 0x400>;
+ interrupts = <0 38 4>;
+ reg-shift = <2>;
+ reg-io-width = <4>;
+ clocks = <&osc24M>;
+ status = "disabled";
+ };
+ };
+};
*
* Copyright 2014 - Hans de Goede <hdegoede@redhat.com>
*
- * The code contained herein is licensed under the GNU General Public
- * License. You may obtain a copy of the GNU General Public License
- * Version 2 or later at the following locations:
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
*
- * http://www.opensource.org/licenses/gpl-license.html
- * http://www.gnu.org/copyleft/gpl.html
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
*/
/ {
allwinner,pull = <0>;
};
+ usb0_vbus_pin_a: usb0_vbus_pin@0 {
+ allwinner,pins = "PB9";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <0>;
+ allwinner,pull = <0>;
+ };
+
usb1_vbus_pin_a: usb1_vbus_pin@0 {
allwinner,pins = "PH6";
allwinner,function = "gpio_out";
regulator-name = "ahci-5v";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
+ regulator-boot-on;
enable-active-high;
gpio = <&pio 1 8 0>;
status = "disabled";
};
+ reg_usb0_vbus: usb0-vbus {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb0_vbus_pin_a>;
+ regulator-name = "usb0-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ gpio = <&pio 1 9 0>;
+ status = "disabled";
+ };
+
reg_usb1_vbus: usb1-vbus {
compatible = "regulator-fixed";
pinctrl-names = "default";
aliases {
rtc0 = "/i2c@7000d000/tps65913@58";
rtc1 = "/rtc@7000e000";
+ serial0 = &uartd;
};
memory {
linux,initrd-end = <0x82800000>;
};
+ aliases {
+ serial0 = &uartd;
+ };
+
firmware {
trusted-foundations {
compatible = "tlm,trusted-foundations";
regulator-name = "vddio-sdmmc3";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
- regulator-always-on;
- regulator-boot-on;
};
ldousb {
sdhci@78000400 {
status = "okay";
bus-width = <4>;
- vmmc-supply = <&vddio_sdmmc3>;
+ vqmmc-supply = <&vddio_sdmmc3>;
cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
power-gpios = <&gpio TEGRA_GPIO(H, 0) GPIO_ACTIVE_HIGH>;
};
sdhci@78000600 {
status = "okay";
bus-width = <8>;
- vmmc-supply = <&vdd_1v8>;
non-removable;
};
linux,initrd-end = <0x82800000>;
};
+ aliases {
+ serial0 = &uartd;
+ };
+
firmware {
trusted-foundations {
compatible = "tlm,trusted-foundations";
sdhci@78000600 {
status = "okay";
bus-width = <8>;
- vmmc-supply = <&vdd_1v8>;
non-removable;
};
compatible = "nvidia,tegra114";
interrupt-parent = <&gic>;
- aliases {
- serial0 = &uarta;
- serial1 = &uartb;
- serial2 = &uartc;
- serial3 = &uartd;
- };
-
host1x@50000000 {
compatible = "nvidia,tegra114-host1x", "simple-bus";
reg = <0x50000000 0x00028000>;
aliases {
rtc0 = "/i2c@0,7000d000/pmic@40";
rtc1 = "/rtc@0,7000e000";
+ serial0 = &uartd;
};
memory {
aliases {
rtc0 = "/i2c@0,7000d000/pmic@40";
rtc1 = "/rtc@0,7000e000";
+ serial0 = &uarta;
};
memory {
aliases {
rtc0 = "/i2c@0,7000d000/pmic@40";
rtc1 = "/rtc@0,7000e000";
+ serial0 = &uarta;
};
memory {
* the APB DMA based serial driver, the comptible is
* "nvidia,tegra124-hsuart", "nvidia,tegra30-hsuart".
*/
- serial@0,70006000 {
+ uarta: serial@0,70006000 {
compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
reg = <0x0 0x70006000 0x0 0x40>;
reg-shift = <2>;
status = "disabled";
};
- serial@0,70006040 {
+ uartb: serial@0,70006040 {
compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
reg = <0x0 0x70006040 0x0 0x40>;
reg-shift = <2>;
status = "disabled";
};
- serial@0,70006200 {
+ uartc: serial@0,70006200 {
compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
reg = <0x0 0x70006200 0x0 0x40>;
reg-shift = <2>;
status = "disabled";
};
- serial@0,70006300 {
+ uartd: serial@0,70006300 {
compatible = "nvidia,tegra124-uart", "nvidia,tegra20-uart";
reg = <0x0 0x70006300 0x0 0x40>;
reg-shift = <2>;
aliases {
rtc0 = "/i2c@7000d000/tps6586x@34";
rtc1 = "/rtc@7000e000";
+ serial0 = &uartd;
};
memory {
model = "Toradex Colibri T20 512MB on Iris";
compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20";
+ aliases {
+ serial0 = &uarta;
+ serial1 = &uartd;
+ };
+
host1x@50000000 {
hdmi@54280000 {
status = "okay";
model = "Avionic Design Medcom-Wide board";
compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20";
+ aliases {
+ serial0 = &uartd;
+ };
+
pwm@7000a000 {
status = "okay";
};
aliases {
rtc0 = "/i2c@7000d000/tps6586x@34";
rtc1 = "/rtc@7000e000";
+ serial0 = &uarta;
+ serial1 = &uartc;
};
memory {
aliases {
rtc0 = "/i2c@7000d000/tps6586x@34";
rtc1 = "/rtc@7000e000";
+ serial0 = &uartd;
};
memory {
aliases {
rtc0 = "/i2c@7000d000/tps6586x@34";
rtc1 = "/rtc@7000e000";
+ serial0 = &uartd;
};
memory {
aliases {
rtc0 = "/i2c@7000c500/rtc@56";
rtc1 = "/rtc@7000e000";
+ serial0 = &uarta;
};
memory {
aliases {
rtc0 = "/i2c@7000d000/tps6586x@34";
rtc1 = "/rtc@7000e000";
+ serial0 = &uartd;
};
memory {
aliases {
rtc0 = "/i2c@7000d000/max8907@3c";
rtc1 = "/rtc@7000e000";
+ serial0 = &uarta;
};
memory {
compatible = "nvidia,tegra20";
interrupt-parent = <&intc>;
- aliases {
- serial0 = &uarta;
- serial1 = &uartb;
- serial2 = &uartc;
- serial3 = &uartd;
- serial4 = &uarte;
- };
-
host1x@50000000 {
compatible = "nvidia,tegra20-host1x", "simple-bus";
reg = <0x50000000 0x00024000>;
rtc0 = "/i2c@7000c000/rtc@68";
rtc1 = "/i2c@7000d000/tps65911@2d";
rtc2 = "/rtc@7000e000";
+ serial0 = &uarta;
+ serial1 = &uartb;
+ serial2 = &uartc;
+ serial3 = &uartd;
};
pcie-controller@00003000 {
aliases {
rtc0 = "/i2c@7000d000/tps65911@2d";
rtc1 = "/rtc@7000e000";
+ serial0 = &uarta;
};
memory {
aliases {
rtc0 = "/i2c@7000d000/tps65911@2d";
rtc1 = "/rtc@7000e000";
+ serial0 = &uarta;
+ serial1 = &uartc;
};
memory {
/* ALS and Proximity sensor */
isl29028@44 {
- compatible = "isil,isl29028";
+ compatible = "isl,isl29028";
reg = <0x44>;
interrupt-parent = <&gpio>;
interrupts = <TEGRA_GPIO(L, 0) IRQ_TYPE_LEVEL_HIGH>;
rtc0 = "/i2c@7000c000/rtc@68";
rtc1 = "/i2c@7000d000/tps65911@2d";
rtc2 = "/rtc@7000e000";
+ serial0 = &uarta;
+ serial1 = &uartb;
+ serial2 = &uartd;
};
host1x@50000000 {
compatible = "nvidia,tegra30";
interrupt-parent = <&intc>;
- aliases {
- serial0 = &uarta;
- serial1 = &uartb;
- serial2 = &uartc;
- serial3 = &uartd;
- serial4 = &uarte;
- };
-
pcie-controller@00003000 {
compatible = "nvidia,tegra30-pcie";
device_type = "pci";
--- /dev/null
+/*
+ * Copyright 2014 Toradex AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/ {
+ chosen {
+ bootargs = "console=ttyLP0,115200";
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sys_5v0_reg: regulator@0 {
+ compatible = "regulator-fixed";
+ reg = <0>;
+ regulator-name = "5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ /* USBH_PEN */
+ usbh_vbus_reg: regulator@1 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbh1_reg>;
+ reg = <1>;
+ regulator-name = "usbh_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 19 GPIO_ACTIVE_LOW>;
+ vin-supply = <&sys_5v0_reg>;
+ };
+ };
+};
+
+&bl {
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&fec1 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+ status = "okay";
+};
+
+&i2c0 {
+ status = "okay";
+
+ /* M41T0M6 real time clock on carrier board */
+ rtc: m41t0m6@68 {
+ compatible = "st,m41t00";
+ reg = <0x68>;
+ };
+};
+
+&pwm0 {
+ status = "okay";
+};
+
+&pwm1 {
+ status = "okay";
+};
+
+&uart0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <&usbh_vbus_reg>;
+};
--- /dev/null
+/*
+ * Copyright 2014 Toradex AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/ {
+ bl: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm0 0 5000000 0>;
+ status = "disabled";
+ };
+};
+
+&adc0 {
+ status = "okay";
+};
+
+&adc1 {
+ status = "okay";
+};
+
+&edma0 {
+ status = "okay";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+};
+
+&fec1 {
+ phy-mode = "rmii";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1>;
+};
+
+&i2c0 {
+ clock-frequency = <400000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c0>;
+};
+
+&pwm0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm0>;
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+};
+
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart0>;
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+};
+
+&usbdev0 {
+ disable-over-current;
+ status = "okay";
+};
+
+&usbh1 {
+ disable-over-current;
+ status = "okay";
+};
+
+&usbmisc0 {
+ status = "okay";
+};
+
+&usbmisc1 {
+ status = "okay";
+};
+
+&usbphy0 {
+ status = "okay";
+};
+
+&usbphy1 {
+ status = "okay";
+};
+
+&iomuxc {
+ vf610-colibri {
+ pinctrl_gpio_ext: gpio_ext {
+ fsl,pins = <
+ VF610_PAD_PTD10__GPIO_89 0x22ed /* EXT_IO_0 */
+ VF610_PAD_PTD9__GPIO_88 0x22ed /* EXT_IO_1 */
+ VF610_PAD_PTD26__GPIO_68 0x22ed /* EXT_IO_2 */
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ VF610_PAD_PTB20__GPIO_42 0x219d
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
+ VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
+ VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
+ VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1
+ VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
+ VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
+ VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
+ VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
+ VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
+ >;
+ };
+
+ pinctrl_i2c0: i2c0grp {
+ fsl,pins = <
+ VF610_PAD_PTB14__I2C0_SCL 0x37ff
+ VF610_PAD_PTB15__I2C0_SDA 0x37ff
+ >;
+ };
+
+ pinctrl_pwm0: pwm0grp {
+ fsl,pins = <
+ VF610_PAD_PTB0__FTM0_CH0 0x1182
+ VF610_PAD_PTB1__FTM0_CH1 0x1182
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ VF610_PAD_PTB8__FTM1_CH0 0x1182
+ VF610_PAD_PTB9__FTM1_CH1 0x1182
+ >;
+ };
+
+ pinctrl_uart0: uart0grp {
+ fsl,pins = <
+ VF610_PAD_PTB10__UART0_TX 0x21a2
+ VF610_PAD_PTB11__UART0_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ VF610_PAD_PTB4__UART1_TX 0x21a2
+ VF610_PAD_PTB5__UART1_RX 0x21a1
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ VF610_PAD_PTD0__UART2_TX 0x21a2
+ VF610_PAD_PTD1__UART2_RX 0x21a1
+ VF610_PAD_PTD2__UART2_RTS 0x21a2
+ VF610_PAD_PTD3__UART2_CTS 0x21a1
+ >;
+ };
+
+ pinctrl_usbh1_reg: gpio_usb_vbus {
+ fsl,pins = <
+ VF610_PAD_PTD4__GPIO_83 0x22ed
+ >;
+ };
+ };
+};
--- /dev/null
+/*
+ * Copyright 2014 Toradex AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+/dts-v1/;
+#include "vf500-colibri.dtsi"
+#include "vf-colibri-eval-v3.dtsi"
+
+/ {
+ model = "Toradex Colibri VF50 on Colibri Evaluation Board";
+ compatible = "toradex,vf500-colibri_vf50-on-eval", "toradex,vf500-colibri_vf50", "fsl,vf500";
+};
--- /dev/null
+/*
+ * Copyright 2014 Toradex AG
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include "vf500.dtsi"
+#include "vf-colibri.dtsi"
+
+/ {
+ model = "Toradex Colibri VF50 COM";
+ compatible = "toradex,vf610-colibri_vf50", "fsl,vf500";
+
+ memory {
+ reg = <0x80000000 0x8000000>;
+ };
+};
--- /dev/null
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include "skeleton.dtsi"
+#include "vfxxx.dtsi"
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ a5_cpu: cpu@0 {
+ compatible = "arm,cortex-a5";
+ device_type = "cpu";
+ reg = <0x0>;
+ };
+ };
+
+ soc {
+ interrupt-parent = <&intc>;
+
+ aips-bus@40000000 {
+
+ intc: interrupt-controller@40002000 {
+ compatible = "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x40003000 0x1000>,
+ <0x40002100 0x100>;
+ };
+
+ global_timer: timer@40002200 {
+ compatible = "arm,cortex-a9-global-timer";
+ reg = <0x40002200 0x20>;
+ interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks VF610_CLK_PLATFORM_BUS>;
+ };
+ };
+ };
+};
+
+&adc0 {
+ interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&adc1 {
+ interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&can0 {
+ interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&can1 {
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&dspi0 {
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&edma0 {
+ interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma-tx", "edma-err";
+};
+
+&edma1 {
+ interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "edma-tx", "edma-err";
+};
+
+&esdhc1 {
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&fec0 {
+ interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&fec1 {
+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&ftm {
+ interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio1 {
+ interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio2 {
+ interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio3 {
+ interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio4 {
+ interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&gpio5 {
+ interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&i2c0 {
+ interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&pit {
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&qspi0 {
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&sai2 {
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart0 {
+ interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart1 {
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart2 {
+ interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart3 {
+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart4 {
+ interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&uart5 {
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usbdev0 {
+ interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usbh1 {
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usbphy0 {
+ interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
+};
+
+&usbphy1 {
+ interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+};
/dts-v1/;
#include "vf610-colibri.dtsi"
+#include "vf-colibri-eval-v3.dtsi"
/ {
model = "Toradex Colibri VF61 on Colibri Evaluation Board";
compatible = "toradex,vf610-colibri_vf61-on-eval", "toradex,vf610-colibri_vf61", "fsl,vf610";
-
- chosen {
- bootargs = "console=ttyLP0,115200";
- };
-};
-
-&esdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1>;
- bus-width = <4>;
- status = "okay";
-};
-
-&fec1 {
- phy-mode = "rmii";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec1>;
- status = "okay";
-};
-
-&uart0 {
- status = "okay";
-};
-
-&uart1 {
- status = "okay";
-};
-
-&uart2 {
- status = "okay";
-};
+};
\ No newline at end of file
*/
#include "vf610.dtsi"
+#include "vf-colibri.dtsi"
/ {
model = "Toradex Colibri VF61 COM";
memory {
reg = <0x80000000 0x10000000>;
};
-
- clocks {
- enet_ext {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <50000000>;
- };
- };
-
-};
-
-&esdhc1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_esdhc1>;
- bus-width = <4>;
-};
-
-&fec1 {
- phy-mode = "rmii";
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_fec1>;
};
&L2 {
arm,data-latency = <2 1 2>;
arm,tag-latency = <3 2 3>;
};
-
-&uart0 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart0>;
-};
-
-&uart1 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart1>;
-};
-
-&uart2 {
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_uart2>;
-};
-
-&usbdev0 {
- disable-over-current;
- status = "okay";
-};
-
-&usbh1 {
- disable-over-current;
- status = "okay";
-};
-
-&iomuxc {
- vf610-colibri {
- pinctrl_esdhc1: esdhc1grp {
- fsl,pins = <
- VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
- VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
- VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
- VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
- VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
- VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
- VF610_PAD_PTB20__GPIO_42 0x219d
- >;
- };
-
- pinctrl_fec1: fec1grp {
- fsl,pins = <
- VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
- VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3
- VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1
- VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1
- VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1
- VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1
- VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2
- VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2
- VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2
- >;
- };
-
- pinctrl_uart0: uart0grp {
- fsl,pins = <
- VF610_PAD_PTB10__UART0_TX 0x21a2
- VF610_PAD_PTB11__UART0_RX 0x21a1
- >;
- };
-
- pinctrl_uart1: uart1grp {
- fsl,pins = <
- VF610_PAD_PTB4__UART1_TX 0x21a2
- VF610_PAD_PTB5__UART1_RX 0x21a1
- >;
- };
-
- pinctrl_uart2: uart2grp {
- fsl,pins = <
- VF610_PAD_PTD0__UART2_TX 0x21a2
- VF610_PAD_PTD1__UART2_RX 0x21a1
- VF610_PAD_PTD2__UART2_RTS 0x21a2
- VF610_PAD_PTD3__UART2_CTS 0x21a1
- >;
- };
- };
-};
reg = <0x80000000 0x10000000>;
};
- clocks {
- enet_ext {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <50000000>;
- };
+ enet_ext: enet_ext {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
};
+};
+&clks {
+ clocks = <&sxosc>, <&fxosc>, <&enet_ext>;
+ clock-names = "sxosc", "fxosc", "enet_ext";
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ bus-width = <4>;
+ status = "okay";
};
&fec1 {
&iomuxc {
vf610-cosmic {
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ VF610_PAD_PTA24__ESDHC1_CLK 0x31ef
+ VF610_PAD_PTA25__ESDHC1_CMD 0x31ef
+ VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef
+ VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef
+ VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef
+ VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef
+ VF610_PAD_PTB28__GPIO_98 0x219d
+ >;
+ };
+
pinctrl_fec1: fec1grp {
fsl,pins = <
VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2
reg = <0x80000000 0x8000000>;
};
- clocks {
- audio_ext {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24576000>;
- };
+ audio_ext: mclk_osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24576000>;
+ };
- enet_ext {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <50000000>;
- };
+ enet_ext: eth_osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
};
regulators {
status = "okay";
};
+&clks {
+ clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>;
+ clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext";
+};
+
&dspi0 {
bus-num = <0>;
pinctrl-names = "default";
};
};
+&edma0 {
+ status = "okay";
+};
+
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
bus-width = <4>;
+ cd-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
status = "okay";
};
disable-over-current;
status = "okay";
};
+
+&usbmisc0 {
+ status = "okay";
+};
+
+&usbmisc1 {
+ status = "okay";
+};
+
+&usbphy0 {
+ status = "okay";
+};
+
+&usbphy1 {
+ status = "okay";
+};
* (at your option) any later version.
*/
-#include "skeleton.dtsi"
-#include "vf610-pinfunc.h"
-#include <dt-bindings/clock/vf610-clock.h>
-#include <dt-bindings/interrupt-controller/irq.h>
+#include "vf500.dtsi"
-/ {
- aliases {
- can0 = &can0;
- can1 = &can1;
- serial0 = &uart0;
- serial1 = &uart1;
- serial2 = &uart2;
- serial3 = &uart3;
- serial4 = &uart4;
- serial5 = &uart5;
- gpio0 = &gpio1;
- gpio1 = &gpio2;
- gpio2 = &gpio3;
- gpio3 = &gpio4;
- gpio4 = &gpio5;
- usbphy0 = &usbphy0;
- usbphy1 = &usbphy1;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- cpu@0 {
- compatible = "arm,cortex-a5";
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
- };
-
- clocks {
- #address-cells = <1>;
- #size-cells = <0>;
-
- sxosc {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- };
-
- fxosc {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- };
- };
-
- soc {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "simple-bus";
- interrupt-parent = <&intc>;
- ranges;
-
- aips0: aips-bus@40000000 {
- compatible = "fsl,aips-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- interrupt-parent = <&intc>;
- reg = <0x40000000 0x70000>;
- ranges;
-
- intc: interrupt-controller@40002000 {
- compatible = "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x40003000 0x1000>,
- <0x40002100 0x100>;
- };
-
- L2: l2-cache@40006000 {
- compatible = "arm,pl310-cache";
- reg = <0x40006000 0x1000>;
- cache-unified;
- cache-level = <2>;
- arm,data-latency = <1 1 1>;
- arm,tag-latency = <2 2 2>;
- };
-
- edma0: dma-controller@40018000 {
- #dma-cells = <2>;
- compatible = "fsl,vf610-edma";
- reg = <0x40018000 0x2000>,
- <0x40024000 0x1000>,
- <0x40025000 0x1000>;
- interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>,
- <0 9 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "edma-tx", "edma-err";
- dma-channels = <32>;
- clock-names = "dmamux0", "dmamux1";
- clocks = <&clks VF610_CLK_DMAMUX0>,
- <&clks VF610_CLK_DMAMUX1>;
- };
-
- can0: flexcan@40020000 {
- compatible = "fsl,vf610-flexcan";
- reg = <0x40020000 0x4000>;
- interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks VF610_CLK_FLEXCAN0>,
- <&clks VF610_CLK_FLEXCAN0>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
-
- uart0: serial@40027000 {
- compatible = "fsl,vf610-lpuart";
- reg = <0x40027000 0x1000>;
- interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks VF610_CLK_UART0>;
- clock-names = "ipg";
- dmas = <&edma0 0 2>,
- <&edma0 0 3>;
- dma-names = "rx","tx";
- status = "disabled";
- };
-
- uart1: serial@40028000 {
- compatible = "fsl,vf610-lpuart";
- reg = <0x40028000 0x1000>;
- interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks VF610_CLK_UART1>;
- clock-names = "ipg";
- dmas = <&edma0 0 4>,
- <&edma0 0 5>;
- dma-names = "rx","tx";
- status = "disabled";
- };
-
- uart2: serial@40029000 {
- compatible = "fsl,vf610-lpuart";
- reg = <0x40029000 0x1000>;
- interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks VF610_CLK_UART2>;
- clock-names = "ipg";
- dmas = <&edma0 0 6>,
- <&edma0 0 7>;
- dma-names = "rx","tx";
- status = "disabled";
- };
-
- uart3: serial@4002a000 {
- compatible = "fsl,vf610-lpuart";
- reg = <0x4002a000 0x1000>;
- interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks VF610_CLK_UART3>;
- clock-names = "ipg";
- dmas = <&edma0 0 8>,
- <&edma0 0 9>;
- dma-names = "rx","tx";
- status = "disabled";
- };
-
- dspi0: dspi0@4002c000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,vf610-dspi";
- reg = <0x4002c000 0x1000>;
- interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks VF610_CLK_DSPI0>;
- clock-names = "dspi";
- spi-num-chipselects = <5>;
- status = "disabled";
- };
-
- sai2: sai@40031000 {
- compatible = "fsl,vf610-sai";
- reg = <0x40031000 0x1000>;
- interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks VF610_CLK_SAI2>;
- clock-names = "sai";
- dma-names = "tx", "rx";
- dmas = <&edma0 0 21>,
- <&edma0 0 20>;
- status = "disabled";
- };
-
- pit: pit@40037000 {
- compatible = "fsl,vf610-pit";
- reg = <0x40037000 0x1000>;
- interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks VF610_CLK_PIT>;
- clock-names = "pit";
- };
-
- pwm0: pwm@40038000 {
- compatible = "fsl,vf610-ftm-pwm";
- #pwm-cells = <3>;
- reg = <0x40038000 0x1000>;
- clock-names = "ftm_sys", "ftm_ext",
- "ftm_fix", "ftm_cnt_clk_en";
- clocks = <&clks VF610_CLK_FTM0>,
- <&clks VF610_CLK_FTM0_EXT_SEL>,
- <&clks VF610_CLK_FTM0_FIX_SEL>,
- <&clks VF610_CLK_FTM0_EXT_FIX_EN>;
- status = "disabled";
- };
-
- adc0: adc@4003b000 {
- compatible = "fsl,vf610-adc";
- reg = <0x4003b000 0x1000>;
- interrupts = <0 53 0x04>;
- clocks = <&clks VF610_CLK_ADC0>;
- clock-names = "adc";
- status = "disabled";
- };
-
- wdog@4003e000 {
- compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
- reg = <0x4003e000 0x1000>;
- clocks = <&clks VF610_CLK_WDT>;
- clock-names = "wdog";
- };
-
- qspi0: quadspi@40044000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,vf610-qspi";
- reg = <0x40044000 0x1000>;
- interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks VF610_CLK_QSPI0_EN>,
- <&clks VF610_CLK_QSPI0>;
- clock-names = "qspi_en", "qspi";
- status = "disabled";
- };
-
- iomuxc: iomuxc@40048000 {
- compatible = "fsl,vf610-iomuxc";
- reg = <0x40048000 0x1000>;
- #gpio-range-cells = <3>;
- };
-
- gpio1: gpio@40049000 {
- compatible = "fsl,vf610-gpio";
- reg = <0x40049000 0x1000 0x400ff000 0x40>;
- interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-ranges = <&iomuxc 0 0 32>;
- };
-
- gpio2: gpio@4004a000 {
- compatible = "fsl,vf610-gpio";
- reg = <0x4004a000 0x1000 0x400ff040 0x40>;
- interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-ranges = <&iomuxc 0 32 32>;
- };
-
- gpio3: gpio@4004b000 {
- compatible = "fsl,vf610-gpio";
- reg = <0x4004b000 0x1000 0x400ff080 0x40>;
- interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-ranges = <&iomuxc 0 64 32>;
- };
-
- gpio4: gpio@4004c000 {
- compatible = "fsl,vf610-gpio";
- reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
- interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-ranges = <&iomuxc 0 96 32>;
- };
-
- gpio5: gpio@4004d000 {
- compatible = "fsl,vf610-gpio";
- reg = <0x4004d000 0x1000 0x400ff100 0x40>;
- interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>;
- gpio-controller;
- #gpio-cells = <2>;
- interrupt-controller;
- #interrupt-cells = <2>;
- gpio-ranges = <&iomuxc 0 128 7>;
- };
-
- anatop: anatop@40050000 {
- compatible = "fsl,vf610-anatop", "syscon";
- reg = <0x40050000 0x400>;
- };
-
- usbphy0: usbphy@40050800 {
- compatible = "fsl,vf610-usbphy";
- reg = <0x40050800 0x400>;
- interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks VF610_CLK_USBPHY0>;
- fsl,anatop = <&anatop>;
- };
-
- usbphy1: usbphy@40050c00 {
- compatible = "fsl,vf610-usbphy";
- reg = <0x40050c00 0x400>;
- interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks VF610_CLK_USBPHY1>;
- fsl,anatop = <&anatop>;
- };
-
- i2c0: i2c@40066000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,vf610-i2c";
- reg = <0x40066000 0x1000>;
- interrupts =<0 71 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks VF610_CLK_I2C0>;
- clock-names = "ipg";
- dmas = <&edma0 0 50>,
- <&edma0 0 51>;
- dma-names = "rx","tx";
- status = "disabled";
- };
-
- clks: ccm@4006b000 {
- compatible = "fsl,vf610-ccm";
- reg = <0x4006b000 0x1000>;
- #clock-cells = <1>;
- };
-
- usbdev0: usb@40034000 {
- compatible = "fsl,vf610-usb", "fsl,imx27-usb";
- reg = <0x40034000 0x800>;
- interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks VF610_CLK_USBC0>;
- fsl,usbphy = <&usbphy0>;
- fsl,usbmisc = <&usbmisc0 0>;
- dr_mode = "peripheral";
- status = "disabled";
- };
-
- usbmisc0: usb@40034800 {
- #index-cells = <1>;
- compatible = "fsl,vf610-usbmisc";
- reg = <0x40034800 0x200>;
- clocks = <&clks VF610_CLK_USBC0>;
- };
- };
-
- aips1: aips-bus@40080000 {
- compatible = "fsl,aips-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- reg = <0x40080000 0x80000>;
- ranges;
-
- edma1: dma-controller@40098000 {
- #dma-cells = <2>;
- compatible = "fsl,vf610-edma";
- reg = <0x40098000 0x2000>,
- <0x400a1000 0x1000>,
- <0x400a2000 0x1000>;
- interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>,
- <0 11 IRQ_TYPE_LEVEL_HIGH>;
- interrupt-names = "edma-tx", "edma-err";
- dma-channels = <32>;
- clock-names = "dmamux0", "dmamux1";
- clocks = <&clks VF610_CLK_DMAMUX2>,
- <&clks VF610_CLK_DMAMUX3>;
- };
-
- uart4: serial@400a9000 {
- compatible = "fsl,vf610-lpuart";
- reg = <0x400a9000 0x1000>;
- interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks VF610_CLK_UART4>;
- clock-names = "ipg";
- status = "disabled";
- };
-
- uart5: serial@400aa000 {
- compatible = "fsl,vf610-lpuart";
- reg = <0x400aa000 0x1000>;
- interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks VF610_CLK_UART5>;
- clock-names = "ipg";
- status = "disabled";
- };
-
- adc1: adc@400bb000 {
- compatible = "fsl,vf610-adc";
- reg = <0x400bb000 0x1000>;
- interrupts = <0 54 0x04>;
- clocks = <&clks VF610_CLK_ADC1>;
- clock-names = "adc";
- status = "disabled";
- };
-
- esdhc1: esdhc@400b2000 {
- compatible = "fsl,imx53-esdhc";
- reg = <0x400b2000 0x1000>;
- interrupts = <0 28 0x04>;
- clocks = <&clks VF610_CLK_IPG_BUS>,
- <&clks VF610_CLK_PLATFORM_BUS>,
- <&clks VF610_CLK_ESDHC1>;
- clock-names = "ipg", "ahb", "per";
- status = "disabled";
- };
-
- usbh1: usb@400b4000 {
- compatible = "fsl,vf610-usb", "fsl,imx27-usb";
- reg = <0x400b4000 0x800>;
- interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks VF610_CLK_USBC1>;
- fsl,usbphy = <&usbphy1>;
- fsl,usbmisc = <&usbmisc1 0>;
- dr_mode = "host";
- status = "disabled";
- };
-
- usbmisc1: usb@400b4800 {
- #index-cells = <1>;
- compatible = "fsl,vf610-usbmisc";
- reg = <0x400b4800 0x200>;
- clocks = <&clks VF610_CLK_USBC1>;
- };
-
- ftm: ftm@400b8000 {
- compatible = "fsl,ftm-timer";
- reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
- interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>;
- clock-names = "ftm-evt", "ftm-src",
- "ftm-evt-counter-en", "ftm-src-counter-en";
- clocks = <&clks VF610_CLK_FTM2>,
- <&clks VF610_CLK_FTM3>,
- <&clks VF610_CLK_FTM2_EXT_FIX_EN>,
- <&clks VF610_CLK_FTM3_EXT_FIX_EN>;
- status = "disabled";
- };
-
- fec0: ethernet@400d0000 {
- compatible = "fsl,mvf600-fec";
- reg = <0x400d0000 0x1000>;
- interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks VF610_CLK_ENET0>,
- <&clks VF610_CLK_ENET0>,
- <&clks VF610_CLK_ENET>;
- clock-names = "ipg", "ahb", "ptp";
- status = "disabled";
- };
-
- fec1: ethernet@400d1000 {
- compatible = "fsl,mvf600-fec";
- reg = <0x400d1000 0x1000>;
- interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks VF610_CLK_ENET1>,
- <&clks VF610_CLK_ENET1>,
- <&clks VF610_CLK_ENET>;
- clock-names = "ipg", "ahb", "ptp";
- status = "disabled";
- };
-
- can1: flexcan@400d4000 {
- compatible = "fsl,vf610-flexcan";
- reg = <0x400d4000 0x4000>;
- interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&clks VF610_CLK_FLEXCAN1>,
- <&clks VF610_CLK_FLEXCAN1>;
- clock-names = "ipg", "per";
- status = "disabled";
- };
+&a5_cpu {
+ next-level-cache = <&L2>;
+};
- };
+&aips0 {
+ L2: l2-cache@40006000 {
+ compatible = "arm,pl310-cache";
+ reg = <0x40006000 0x1000>;
+ cache-unified;
+ cache-level = <2>;
+ arm,data-latency = <1 1 1>;
+ arm,tag-latency = <2 2 2>;
};
};
--- /dev/null
+/*
+ * Copyright 2013 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include "vf610-pinfunc.h"
+#include <dt-bindings/clock/vf610-clock.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ aliases {
+ can0 = &can0;
+ can1 = &can1;
+ serial0 = &uart0;
+ serial1 = &uart1;
+ serial2 = &uart2;
+ serial3 = &uart3;
+ serial4 = &uart4;
+ serial5 = &uart5;
+ gpio0 = &gpio1;
+ gpio1 = &gpio2;
+ gpio2 = &gpio3;
+ gpio3 = &gpio4;
+ gpio4 = &gpio5;
+ usbphy0 = &usbphy0;
+ usbphy1 = &usbphy1;
+ };
+
+ fxosc: fxosc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ };
+
+ sxosc: sxosc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ };
+
+ soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "simple-bus";
+ ranges;
+
+ aips0: aips-bus@40000000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ edma0: dma-controller@40018000 {
+ #dma-cells = <2>;
+ compatible = "fsl,vf610-edma";
+ reg = <0x40018000 0x2000>,
+ <0x40024000 0x1000>,
+ <0x40025000 0x1000>;
+ dma-channels = <32>;
+ clock-names = "dmamux0", "dmamux1";
+ clocks = <&clks VF610_CLK_DMAMUX0>,
+ <&clks VF610_CLK_DMAMUX1>;
+ status = "disabled";
+ };
+
+ can0: flexcan@40020000 {
+ compatible = "fsl,vf610-flexcan";
+ reg = <0x40020000 0x4000>;
+ clocks = <&clks VF610_CLK_FLEXCAN0>,
+ <&clks VF610_CLK_FLEXCAN0>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ uart0: serial@40027000 {
+ compatible = "fsl,vf610-lpuart";
+ reg = <0x40027000 0x1000>;
+ clocks = <&clks VF610_CLK_UART0>;
+ clock-names = "ipg";
+ dmas = <&edma0 0 2>,
+ <&edma0 0 3>;
+ dma-names = "rx","tx";
+ status = "disabled";
+ };
+
+ uart1: serial@40028000 {
+ compatible = "fsl,vf610-lpuart";
+ reg = <0x40028000 0x1000>;
+ clocks = <&clks VF610_CLK_UART1>;
+ clock-names = "ipg";
+ dmas = <&edma0 0 4>,
+ <&edma0 0 5>;
+ dma-names = "rx","tx";
+ status = "disabled";
+ };
+
+ uart2: serial@40029000 {
+ compatible = "fsl,vf610-lpuart";
+ reg = <0x40029000 0x1000>;
+ clocks = <&clks VF610_CLK_UART2>;
+ clock-names = "ipg";
+ dmas = <&edma0 0 6>,
+ <&edma0 0 7>;
+ dma-names = "rx","tx";
+ status = "disabled";
+ };
+
+ uart3: serial@4002a000 {
+ compatible = "fsl,vf610-lpuart";
+ reg = <0x4002a000 0x1000>;
+ clocks = <&clks VF610_CLK_UART3>;
+ clock-names = "ipg";
+ dmas = <&edma0 0 8>,
+ <&edma0 0 9>;
+ dma-names = "rx","tx";
+ status = "disabled";
+ };
+
+ dspi0: dspi0@4002c000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-dspi";
+ reg = <0x4002c000 0x1000>;
+ clocks = <&clks VF610_CLK_DSPI0>;
+ clock-names = "dspi";
+ spi-num-chipselects = <5>;
+ status = "disabled";
+ };
+
+ sai2: sai@40031000 {
+ compatible = "fsl,vf610-sai";
+ reg = <0x40031000 0x1000>;
+ clocks = <&clks VF610_CLK_SAI2>;
+ clock-names = "sai";
+ dma-names = "tx", "rx";
+ dmas = <&edma0 0 21>,
+ <&edma0 0 20>;
+ status = "disabled";
+ };
+
+ pit: pit@40037000 {
+ compatible = "fsl,vf610-pit";
+ reg = <0x40037000 0x1000>;
+ clocks = <&clks VF610_CLK_PIT>;
+ clock-names = "pit";
+ };
+
+ pwm0: pwm@40038000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x40038000 0x1000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clks VF610_CLK_FTM0>,
+ <&clks VF610_CLK_FTM0_EXT_SEL>,
+ <&clks VF610_CLK_FTM0_FIX_SEL>,
+ <&clks VF610_CLK_FTM0_EXT_FIX_EN>;
+ status = "disabled";
+ };
+
+ pwm1: pwm@40039000 {
+ compatible = "fsl,vf610-ftm-pwm";
+ #pwm-cells = <3>;
+ reg = <0x40039000 0x1000>;
+ clock-names = "ftm_sys", "ftm_ext",
+ "ftm_fix", "ftm_cnt_clk_en";
+ clocks = <&clks VF610_CLK_FTM1>,
+ <&clks VF610_CLK_FTM1_EXT_SEL>,
+ <&clks VF610_CLK_FTM1_FIX_SEL>,
+ <&clks VF610_CLK_FTM1_EXT_FIX_EN>;
+ status = "disabled";
+ };
+
+ adc0: adc@4003b000 {
+ compatible = "fsl,vf610-adc";
+ reg = <0x4003b000 0x1000>;
+ clocks = <&clks VF610_CLK_ADC0>;
+ clock-names = "adc";
+ status = "disabled";
+ };
+
+ wdog@4003e000 {
+ compatible = "fsl,vf610-wdt", "fsl,imx21-wdt";
+ reg = <0x4003e000 0x1000>;
+ clocks = <&clks VF610_CLK_WDT>;
+ clock-names = "wdog";
+ status = "disabled";
+ };
+
+ qspi0: quadspi@40044000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-qspi";
+ reg = <0x40044000 0x1000>;
+ clocks = <&clks VF610_CLK_QSPI0_EN>,
+ <&clks VF610_CLK_QSPI0>;
+ clock-names = "qspi_en", "qspi";
+ status = "disabled";
+ };
+
+ iomuxc: iomuxc@40048000 {
+ compatible = "fsl,vf610-iomuxc";
+ reg = <0x40048000 0x1000>;
+ #gpio-range-cells = <3>;
+ };
+
+ gpio1: gpio@40049000 {
+ compatible = "fsl,vf610-gpio";
+ reg = <0x40049000 0x1000 0x400ff000 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 0 32>;
+ };
+
+ gpio2: gpio@4004a000 {
+ compatible = "fsl,vf610-gpio";
+ reg = <0x4004a000 0x1000 0x400ff040 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 32 32>;
+ };
+
+ gpio3: gpio@4004b000 {
+ compatible = "fsl,vf610-gpio";
+ reg = <0x4004b000 0x1000 0x400ff080 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 64 32>;
+ };
+
+ gpio4: gpio@4004c000 {
+ compatible = "fsl,vf610-gpio";
+ reg = <0x4004c000 0x1000 0x400ff0c0 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 96 32>;
+ };
+
+ gpio5: gpio@4004d000 {
+ compatible = "fsl,vf610-gpio";
+ reg = <0x4004d000 0x1000 0x400ff100 0x40>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&iomuxc 0 128 7>;
+ };
+
+ anatop: anatop@40050000 {
+ compatible = "fsl,vf610-anatop", "syscon";
+ reg = <0x40050000 0x400>;
+ };
+
+ usbphy0: usbphy@40050800 {
+ compatible = "fsl,vf610-usbphy";
+ reg = <0x40050800 0x400>;
+ clocks = <&clks VF610_CLK_USBPHY0>;
+ fsl,anatop = <&anatop>;
+ status = "disabled";
+ };
+
+ usbphy1: usbphy@40050c00 {
+ compatible = "fsl,vf610-usbphy";
+ reg = <0x40050c00 0x400>;
+ clocks = <&clks VF610_CLK_USBPHY1>;
+ fsl,anatop = <&anatop>;
+ status = "disabled";
+ };
+
+ i2c0: i2c@40066000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,vf610-i2c";
+ reg = <0x40066000 0x1000>;
+ clocks = <&clks VF610_CLK_I2C0>;
+ clock-names = "ipg";
+ dmas = <&edma0 0 50>,
+ <&edma0 0 51>;
+ dma-names = "rx","tx";
+ status = "disabled";
+ };
+
+ clks: ccm@4006b000 {
+ compatible = "fsl,vf610-ccm";
+ reg = <0x4006b000 0x1000>;
+ clocks = <&sxosc>, <&fxosc>;
+ clock-names = "sxosc", "fxosc";
+ #clock-cells = <1>;
+ };
+
+ usbdev0: usb@40034000 {
+ compatible = "fsl,vf610-usb", "fsl,imx27-usb";
+ reg = <0x40034000 0x800>;
+ clocks = <&clks VF610_CLK_USBC0>;
+ fsl,usbphy = <&usbphy0>;
+ fsl,usbmisc = <&usbmisc0 0>;
+ dr_mode = "peripheral";
+ status = "disabled";
+ };
+
+ usbmisc0: usb@40034800 {
+ #index-cells = <1>;
+ compatible = "fsl,vf610-usbmisc";
+ reg = <0x40034800 0x200>;
+ clocks = <&clks VF610_CLK_USBC0>;
+ status = "disabled";
+ };
+ };
+
+ aips1: aips-bus@40080000 {
+ compatible = "fsl,aips-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ edma1: dma-controller@40098000 {
+ #dma-cells = <2>;
+ compatible = "fsl,vf610-edma";
+ reg = <0x40098000 0x2000>,
+ <0x400a1000 0x1000>,
+ <0x400a2000 0x1000>;
+ dma-channels = <32>;
+ clock-names = "dmamux0", "dmamux1";
+ clocks = <&clks VF610_CLK_DMAMUX2>,
+ <&clks VF610_CLK_DMAMUX3>;
+ status = "disabled";
+ };
+
+ uart4: serial@400a9000 {
+ compatible = "fsl,vf610-lpuart";
+ reg = <0x400a9000 0x1000>;
+ clocks = <&clks VF610_CLK_UART4>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ uart5: serial@400aa000 {
+ compatible = "fsl,vf610-lpuart";
+ reg = <0x400aa000 0x1000>;
+ clocks = <&clks VF610_CLK_UART5>;
+ clock-names = "ipg";
+ status = "disabled";
+ };
+
+ adc1: adc@400bb000 {
+ compatible = "fsl,vf610-adc";
+ reg = <0x400bb000 0x1000>;
+ clocks = <&clks VF610_CLK_ADC1>;
+ clock-names = "adc";
+ status = "disabled";
+ };
+
+ esdhc1: esdhc@400b2000 {
+ compatible = "fsl,imx53-esdhc";
+ reg = <0x400b2000 0x1000>;
+ clocks = <&clks VF610_CLK_IPG_BUS>,
+ <&clks VF610_CLK_PLATFORM_BUS>,
+ <&clks VF610_CLK_ESDHC1>;
+ clock-names = "ipg", "ahb", "per";
+ status = "disabled";
+ };
+
+ usbh1: usb@400b4000 {
+ compatible = "fsl,vf610-usb", "fsl,imx27-usb";
+ reg = <0x400b4000 0x800>;
+ clocks = <&clks VF610_CLK_USBC1>;
+ fsl,usbphy = <&usbphy1>;
+ fsl,usbmisc = <&usbmisc1 0>;
+ dr_mode = "host";
+ status = "disabled";
+ };
+
+ usbmisc1: usb@400b4800 {
+ #index-cells = <1>;
+ compatible = "fsl,vf610-usbmisc";
+ reg = <0x400b4800 0x200>;
+ clocks = <&clks VF610_CLK_USBC1>;
+ status = "disabled";
+ };
+
+ ftm: ftm@400b8000 {
+ compatible = "fsl,ftm-timer";
+ reg = <0x400b8000 0x1000 0x400b9000 0x1000>;
+ clock-names = "ftm-evt", "ftm-src",
+ "ftm-evt-counter-en", "ftm-src-counter-en";
+ clocks = <&clks VF610_CLK_FTM2>,
+ <&clks VF610_CLK_FTM3>,
+ <&clks VF610_CLK_FTM2_EXT_FIX_EN>,
+ <&clks VF610_CLK_FTM3_EXT_FIX_EN>;
+ status = "disabled";
+ };
+
+ fec0: ethernet@400d0000 {
+ compatible = "fsl,mvf600-fec";
+ reg = <0x400d0000 0x1000>;
+ clocks = <&clks VF610_CLK_ENET0>,
+ <&clks VF610_CLK_ENET0>,
+ <&clks VF610_CLK_ENET>;
+ clock-names = "ipg", "ahb", "ptp";
+ status = "disabled";
+ };
+
+ fec1: ethernet@400d1000 {
+ compatible = "fsl,mvf600-fec";
+ reg = <0x400d1000 0x1000>;
+ clocks = <&clks VF610_CLK_ENET1>,
+ <&clks VF610_CLK_ENET1>,
+ <&clks VF610_CLK_ENET>;
+ clock-names = "ipg", "ahb", "ptp";
+ status = "disabled";
+ };
+
+ can1: flexcan@400d4000 {
+ compatible = "fsl,vf610-flexcan";
+ reg = <0x400d4000 0x4000>;
+ clocks = <&clks VF610_CLK_FLEXCAN1>,
+ <&clks VF610_CLK_FLEXCAN1>;
+ clock-names = "ipg", "per";
+ status = "disabled";
+ };
+
+ };
+ };
+};
/* kHz uV */
666667 1000000
333334 1000000
- 222223 1000000
>;
};
interrupt-parent = <&intc>;
ranges;
- adc@f8007100 {
+ adc: adc@f8007100 {
compatible = "xlnx,zynq-xadc-1.00.a";
reg = <0xf8007100 0x20>;
interrupts = <0 7 4>;
<0xF8F00100 0x100>;
};
- L2: cache-controller {
+ L2: cache-controller@f8f02000 {
compatible = "arm,pl310-cache";
reg = <0xF8F02000 0x1000>;
arm,data-latency = <3 2 2>;
cache-level = <2>;
};
- memory-controller@f8006000 {
+ mc: memory-controller@f8006000 {
compatible = "xlnx,zynq-ddrc-a05";
reg = <0xf8006000 0x1000>;
- } ;
+ };
uart0: serial@e0000000 {
compatible = "xlnx,xuartps", "cdns,uart-r1p8";
gem0: ethernet@e000b000 {
compatible = "cdns,gem";
- reg = <0xe000b000 0x4000>;
+ reg = <0xe000b000 0x1000>;
status = "disabled";
interrupts = <0 22 4>;
clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>;
gem1: ethernet@e000c000 {
compatible = "cdns,gem";
- reg = <0xe000c000 0x4000>;
+ reg = <0xe000c000 0x1000>;
status = "disabled";
interrupts = <0 45 4>;
clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>;
clkc: clkc@100 {
#clock-cells = <1>;
compatible = "xlnx,ps7-clkc";
- ps-clk-frequency = <33333333>;
fclk-enable = <0>;
clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
reg = <0xf8f00600 0x20>;
clocks = <&clkc 4>;
};
+
+ watchdog0: watchdog@f8005000 {
+ clocks = <&clkc 45>;
+ compatible = "xlnx,zynq-wdt-r1p2";
+ device_type = "watchdog";
+ interrupt-parent = <&intc>;
+ interrupts = <0 9 1>;
+ reg = <0xf8005000 0x1000>;
+ reset = <0>;
+ timeout-sec = <10>;
+ };
};
};
};
};
+&clkc {
+ fclk-enable = <0xf>;
+ ps-clk-frequency = <33333333>;
+};
+
&gem0 {
status = "okay";
phy-mode = "rgmii-id";
status = "okay";
};
+&clkc {
+ ps-clk-frequency = <33333333>;
+};
+
&gem0 {
status = "okay";
phy-mode = "rgmii-id";
};
+&clkc {
+ ps-clk-frequency = <33333333>;
+};
+
&gem0 {
status = "okay";
phy-mode = "rgmii-id";
};
+&clkc {
+ ps-clk-frequency = <33333333>;
+};
+
&gem0 {
status = "okay";
phy-mode = "rgmii-id";
--- /dev/null
+/*
+ * Copyright (C) 2011 - 2014 Xilinx
+ * Copyright (C) 2012 National Instruments Corp.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+/dts-v1/;
+/include/ "zynq-7000.dtsi"
+
+/ {
+ model = "Zynq ZYBO Development Board";
+ compatible = "digilent,zynq-zybo", "xlnx,zynq-7000";
+
+ memory {
+ device_type = "memory";
+ reg = <0x0 0x20000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyPS0,115200 earlyprintk";
+ };
+
+};
+
+&clkc {
+ ps-clk-frequency = <50000000>;
+};
+
+&gem0 {
+ status = "okay";
+ phy-mode = "rgmii-id";
+ phy-handle = <ðernet_phy>;
+
+ ethernet_phy: ethernet-phy@0 {
+ reg = <0>;
+ };
+};
+
+&sdhci0 {
+ status = "okay";
+};
+
+&uart1 {
+ status = "okay";
+};
#include <linux/io.h>
#include <linux/slab.h>
#include <linux/edma.h>
+#include <linux/dma-mapping.h>
#include <linux/of_address.h>
#include <linux/of_device.h>
#include <linux/of_dma.h>
/* list of channels with no even trigger; terminated by "-1" */
const s8 *noevent;
+ struct edma_soc_info *info;
+
/* The edma_inuse bit for each PaRAM slot is clear unless the
* channel is in use ... by ARM or DSP, for QDMA, or whatever.
*/
~(0x7 << bit), queue_no << bit);
}
-static void __init assign_priority_to_queue(unsigned ctlr, int queue_no,
+static void assign_priority_to_queue(unsigned ctlr, int queue_no,
int priority)
{
int bit = queue_no * 4;
* included in that particular EDMA variant (Eg : dm646x)
*
*/
-static void __init map_dmach_param(unsigned ctlr)
+static void map_dmach_param(unsigned ctlr)
{
int i;
for (i = 0; i < EDMA_MAX_DMACH; i++)
struct device_node *node = pdev->dev.of_node;
struct device *dev = &pdev->dev;
int ret;
+ struct platform_device_info edma_dev_info = {
+ .name = "edma-dma-engine",
+ .dma_mask = DMA_BIT_MASK(32),
+ .parent = &pdev->dev,
+ };
if (node) {
/* Check if this is a second instance registered */
edma_write_array2(j, EDMA_DRAE, i, 1, 0x0);
edma_write_array(j, EDMA_QRAE, i, 0x0);
}
+ edma_cc[j]->info = info[j];
arch_num_cc++;
+
+ edma_dev_info.id = j;
+ platform_device_register_full(&edma_dev_info);
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int edma_pm_resume(struct device *dev)
+{
+ int i, j;
+
+ for (j = 0; j < arch_num_cc; j++) {
+ struct edma *cc = edma_cc[j];
+
+ s8 (*queue_priority_mapping)[2];
+
+ queue_priority_mapping = cc->info->queue_priority_mapping;
+
+ /* Event queue priority mapping */
+ for (i = 0; queue_priority_mapping[i][0] != -1; i++)
+ assign_priority_to_queue(j,
+ queue_priority_mapping[i][0],
+ queue_priority_mapping[i][1]);
+
+ /*
+ * Map the channel to param entry if channel mapping logic
+ * exist
+ */
+ if (edma_read(j, EDMA_CCCFG) & CHMAP_EXIST)
+ map_dmach_param(j);
+
+ for (i = 0; i < cc->num_channels; i++) {
+ if (test_bit(i, cc->edma_inuse)) {
+ /* ensure access through shadow region 0 */
+ edma_or_array2(j, EDMA_DRAE, 0, i >> 5,
+ BIT(i & 0x1f));
+
+ setup_dma_interrupt(i,
+ cc->intr_data[i].callback,
+ cc->intr_data[i].data);
+ }
+ }
}
return 0;
}
+#endif
+
+static const struct dev_pm_ops edma_pm_ops = {
+ SET_LATE_SYSTEM_SLEEP_PM_OPS(NULL, edma_pm_resume)
+};
static struct platform_driver edma_driver = {
.driver = {
.name = "edma",
+ .pm = &edma_pm_ops,
.of_match_table = edma_of_ids,
},
.probe = edma_probe,
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_BINFMT_MISC=y
+CONFIG_PM_RUNTIME=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_NETDEVICES=y
CONFIG_MACB=y
# CONFIG_NET_VENDOR_BROADCOM is not set
+CONFIG_DM9000=y
# CONFIG_NET_VENDOR_FARADAY is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
CONFIG_INPUT_JOYDEV=y
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_QT1070=y
CONFIG_KEYBOARD_GPIO=y
# CONFIG_INPUT_MOUSE is not set
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_AT91_ADC=y
CONFIG_PWM=y
CONFIG_PWM_ATMEL=y
+CONFIG_PWM_ATMEL_TCB=y
CONFIG_EXT4_FS=y
CONFIG_FANOTIFY=y
CONFIG_VFAT_FS=y
+++ /dev/null
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_USER_NS=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_MODULES=y
-CONFIG_MODULE_FORCE_LOAD=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-CONFIG_MODULE_SRCVERSION_ALL=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91RM9200=y
-CONFIG_MACH_ONEARM=y
-CONFIG_MACH_AT91RM9200EK=y
-CONFIG_MACH_CSB337=y
-CONFIG_MACH_CSB637=y
-CONFIG_MACH_CARMEVA=y
-CONFIG_MACH_ATEB9200=y
-CONFIG_MACH_KB9200=y
-CONFIG_MACH_PICOTUX2XX=y
-CONFIG_MACH_KAFA=y
-CONFIG_MACH_ECBAT91=y
-CONFIG_MACH_YL9200=y
-CONFIG_MACH_CPUAT91=y
-CONFIG_MACH_ECO920=y
-CONFIG_MTD_AT91_DATAFLASH_CARD=y
-CONFIG_AT91_TIMER_HZ=100
-# CONFIG_ARM_THUMB is not set
-CONFIG_PCCARD=y
-CONFIG_AT91_CF=y
-CONFIG_AEABI=y
-# CONFIG_COMPACTION is not set
-CONFIG_ZBOOT_ROM_TEXT=0x10000000
-CONFIG_ZBOOT_ROM_BSS=0x20040000
-CONFIG_KEXEC=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_FPE_NWFPE=y
-CONFIG_BINFMT_MISC=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
-CONFIG_IPV6_PRIVACY=y
-CONFIG_IPV6_ROUTER_PREF=y
-CONFIG_IPV6_ROUTE_INFO=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_COMPLEX_MAPPINGS=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PLATRAM=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_ARM_AT91_ETHER=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_SMSC_PHY=y
-CONFIG_MICREL_PHY=y
-# CONFIG_WLAN is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91RM9200_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_S1D13XXX=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_AT91=y
-CONFIG_USB_G_SERIAL=y
-CONFIG_MMC=y
-CONFIG_MMC_ATMELMCI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_EXT4_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_FS=y
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_CRYPTO_PCBC=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_XZ_DEC_ARMTHUMB=y
+++ /dev/null
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_MACH_AT91SAM9260EK=y
-CONFIG_MACH_CAM60=y
-CONFIG_MACH_SAM9_L9260=y
-CONFIG_MACH_AFEB9260=y
-CONFIG_MACH_CPU9260=y
-CONFIG_MACH_FLEXIBITY=y
-CONFIG_MACH_AT91SAM9G20EK=y
-CONFIG_MACH_AT91SAM9G20EK_2MMC=y
-CONFIG_MACH_CPU9G20=y
-CONFIG_MACH_ACMENETUSFOXG20=y
-CONFIG_MACH_PORTUXG20=y
-CONFIG_MACH_STAMP9G20=y
-CONFIG_MACH_PCONTROL_G20=y
-CONFIG_MACH_GSIA18S=y
-CONFIG_MACH_SNAPPER_9260=y
-CONFIG_MACH_AT91SAM9_DT=y
-CONFIG_AT91_SLOW_CLOCK=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_EEPROM_AT25=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_MACB=y
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_MICROCHIP is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-CONFIG_SMSC_PHY=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-CONFIG_SPI_SPIDEV=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_POWER_RESET=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-CONFIG_SND_SEQUENCER_OSS=y
-# CONFIG_SND_VERBOSE_PROCFS is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_AT91=y
-CONFIG_USB_G_SERIAL=y
-CONFIG_MMC=y
-CONFIG_MMC_ATMELMCI=y
-CONFIG_MMC_SPI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RV3029C2=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_IIO=y
-CONFIG_AT91_ADC=y
-CONFIG_EXT4_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-CONFIG_DEBUG_INFO=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
+++ /dev/null
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_KERNEL_LZMA=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_NAMESPACES=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9261=y
-CONFIG_MACH_AT91SAM9261EK=y
-CONFIG_MACH_AT91SAM9G10EK=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_VFP=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_SSC=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_DM9000=y
-CONFIG_USB_ZD1201=m
-CONFIG_RTL8187=m
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_LIBERTAS_SPI=m
-CONFIG_RT2X00=m
-CONFIG_RT2500USB=m
-CONFIG_RT73USB=m
-CONFIG_ZD1211RW=m
-CONFIG_INPUT_POLLDEV=m
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=240
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=320
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_POWER_RESET=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_ATMEL=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_ATMEL_LCDC=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-CONFIG_SND_AT73C213=y
-CONFIG_SND_USB_AUDIO=m
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_AT91=y
-CONFIG_USB_G_SERIAL=y
-CONFIG_MMC=y
-CONFIG_MMC_ATMELMCI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_SQUASHFS=y
-CONFIG_SQUASHFS_LZO=y
-CONFIG_SQUASHFS_XZ=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-CONFIG_CRC_CCITT=m
+++ /dev/null
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_NAMESPACES=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9263=y
-CONFIG_MACH_AT91SAM9263EK=y
-CONFIG_MTD_AT91_DATAFLASH_CARD=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_NET_KEY=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_NFTL=y
-CONFIG_NFTL_RW=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_BLOCK2MTD=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_TCLIB=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-CONFIG_MACB=y
-CONFIG_SMSC_PHY=y
-# CONFIG_WLAN is not set
-CONFIG_INPUT_POLLDEV=m
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ADS7846=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_POWER_RESET=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_ATMEL=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-CONFIG_SND_ATMEL_AC97C=y
-# CONFIG_SND_SPI is not set
-CONFIG_SND_USB_AUDIO=m
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ATMEL_USBA=y
-CONFIG_USB_G_SERIAL=y
-CONFIG_MMC=y
-CONFIG_SDIO_UART=m
-CONFIG_MMC_ATMELMCI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PWM=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_PWM=y
-CONFIG_PWM_ATMEL=y
-CONFIG_EXT4_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=y
-CONFIG_DEBUG_USER=y
-CONFIG_XZ_DEC=y
-CONFIG_FONTS=y
+++ /dev/null
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9G45=y
-CONFIG_MACH_AT91SAM9M10G45EK=y
-CONFIG_MACH_AT91SAM9_DT=y
-CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AEABI=y
-CONFIG_UACCESS_WITH_MEMCPY=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=128M console=ttyS0,115200 initrd=0x71100000,25165824 root=/dev/ram0 rw"
-CONFIG_AUTO_ZRELADDR=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-CONFIG_IPV6_SIT_6RD=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_TCLIB=y
-CONFIG_ATMEL_SSC=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_MACB=y
-CONFIG_DAVICOM_PHY=y
-# CONFIG_INPUT_MOUSEDEV is not set
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_QT1070=y
-CONFIG_KEYBOARD_QT2160=y
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ATMEL_MXT=m
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_POWER_RESET=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_ATMEL=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_ATMEL_LCDC=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_BACKLIGHT_PWM=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_LOGO=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SEQUENCER=y
-CONFIG_SND_MIXER_OSS=y
-CONFIG_SND_PCM_OSS=y
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_VERBOSE_PROCFS is not set
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-CONFIG_SND_ATMEL_AC97C=y
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_ACM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ATMEL_USBA=y
-CONFIG_USB_G_MULTI=y
-CONFIG_USB_G_MULTI_CDC=y
-CONFIG_MMC=y
-# CONFIG_MMC_BLOCK_BOUNCE is not set
-CONFIG_MMC_ATMELMCI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PWM=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_DMADEVICES=y
-CONFIG_AT_HDMAC=y
-CONFIG_DMATEST=m
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_IIO=y
-CONFIG_AT91_ADC=y
-CONFIG_PWM=y
-CONFIG_PWM_ATMEL=y
-CONFIG_EXT4_FS=y
-CONFIG_FANOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_MEMORY_INIT=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_CRYPTO_ECB=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_USER_API_HASH=m
-CONFIG_CRYPTO_USER_API_SKCIPHER=m
-# CONFIG_CRYPTO_HW is not set
-CONFIG_FONTS=y
+++ /dev/null
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9RL=y
-CONFIG_MACH_AT91SAM9RLEK=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,17105363 root=/dev/ram0 rw"
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_NET=y
-CONFIG_UNIX=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=24576
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=320
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=240
-CONFIG_INPUT_EVDEV=y
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_POWER_RESET=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-CONFIG_FB=y
-CONFIG_FB_ATMEL=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ATMEL_USBA=y
-CONFIG_MMC=y
-CONFIG_MMC_ATMELMCI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_PWM=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_IIO=y
-CONFIG_AT91_ADC=y
-CONFIG_PWM=y
-CONFIG_PWM_ATMEL=y
-CONFIG_EXT4_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=y
-CONFIG_NLS_UTF8=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
+++ /dev/null
-CONFIG_EXPERIMENTAL=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-# CONFIG_HOTPLUG is not set
-# CONFIG_ELF_CORE is not set
-# CONFIG_FUTEX is not set
-# CONFIG_TIMERFD is not set
-# CONFIG_VM_EVENT_COUNTERS is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_MMU is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91X40=y
-CONFIG_MACH_AT91EB01=y
-CONFIG_AT91_EARLY_USART0=y
-CONFIG_CPU_ARM7TDMI=y
-CONFIG_SET_MEM_PARAM=y
-CONFIG_DRAM_BASE=0x01000000
-CONFIG_DRAM_SIZE=0x00400000
-CONFIG_FLASH_MEM_BASE=0x01400000
-CONFIG_PROCESSOR_ID=0x14000040
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_BINFMT_FLAT=y
-# CONFIG_SUSPEND is not set
-# CONFIG_FW_LOADER is not set
-CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_RAM=y
-CONFIG_MTD_ROM=y
-CONFIG_BLK_DEV_RAM=y
-# CONFIG_INPUT is not set
-# CONFIG_SERIO is not set
-# CONFIG_VT is not set
-# CONFIG_DEVKMEM is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_HWMON is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-# CONFIG_DNOTIFY is not set
-CONFIG_ROMFS_FS=y
-# CONFIG_ENABLE_MUST_CHECK is not set
# CONFIG_BLK_DEV_BSG is not set
CONFIG_PARTITION_ADVANCED=y
CONFIG_ARCH_BCM=y
-CONFIG_ARCH_BCM_MOBILE=y
+CONFIG_ARCH_BCM_21664=y
+CONFIG_ARCH_BCM_281XX=y
CONFIG_ARM_THUMBEE=y
CONFIG_SMP=y
CONFIG_PREEMPT=y
CONFIG_USB_DWC3=y
CONFIG_USB_HSIC_USB3503=y
CONFIG_MMC=y
+CONFIG_MMC_BLOCK_MINORS=16
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_S3C=y
CONFIG_MMC_SDHCI_S3C_DMA=y
CONFIG_MMC_DW_EXYNOS=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_MAX77686=y
+CONFIG_RTC_DRV_MAX77802=y
CONFIG_RTC_DRV_S5M=y
CONFIG_RTC_DRV_S3C=y
CONFIG_DMADEVICES=y
CONFIG_PL330_DMA=y
CONFIG_COMMON_CLK_MAX77686=y
+CONFIG_COMMON_CLK_MAX77802=y
CONFIG_COMMON_CLK_S2MPS11=y
CONFIG_EXYNOS_IOMMU=y
CONFIG_IIO=y
CONFIG_RD_LZMA=y
CONFIG_ARCH_HISI=y
CONFIG_ARCH_HI3xxx=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_CMDLINE_PARTITION=y
CONFIG_ARCH_HIX5HD2=y
CONFIG_ARCH_HIP04=y
CONFIG_SMP=y
CONFIG_HIGHMEM=y
CONFIG_ARM_APPENDED_DTB=y
CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_NEON=y
CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER=y
+CONFIG_PM_RUNTIME=y
CONFIG_NET=y
+CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_INET=y
CONFIG_IP_PNP=y
CONFIG_ATA=y
CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_NETDEVICES=y
+CONFIG_HIX5HD2_GMAC=y
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_DEPRECATED_OPTIONS=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SPI=y
CONFIG_SPI_PL022=y
CONFIG_PINCTRL_SINGLE=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIOLIB=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_REGULATOR_GPIO=y
+CONFIG_MFD_SYSCON=y
+CONFIG_POWER_RESET_SYSCON=y
CONFIG_DRM=y
CONFIG_FB_SIMPLE=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_MXC=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_STORAGE=y
CONFIG_NOP_USB_XCEIV=y
CONFIG_MMC=y
CONFIG_RTC_CLASS=y
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_IDMAC=y
+CONFIG_MMC_DW_PLTFM=y
CONFIG_RTC_DRV_PL031=y
CONFIG_DMADEVICES=y
CONFIG_DW_DMAC=y
CONFIG_PL330_DMA=y
CONFIG_PWM=y
+CONFIG_PHY_HIX5HD2_SATA=y
CONFIG_EXT4_FS=y
CONFIG_TMPFS=y
CONFIG_NFS_FS=y
CONFIG_ROOT_NFS=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_FS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
CONFIG_DEBUG_KERNEL=y
CONFIG_LOCKUP_DETECTOR=y
CONFIG_VFP=y
# CONFIG_HW_RANDOM is not set
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_IMX=y
+CONFIG_SPI=y
CONFIG_SPI_IMX=y
CONFIG_SPI_SPIDEV=y
CONFIG_GPIO_SYSFS=y
CONFIG_I2C_ALGOPCF=m
CONFIG_I2C_ALGOPCA=m
CONFIG_I2C_IMX=y
+CONFIG_SPI=y
CONFIG_SPI_IMX=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_MC9S08DZ60=y
CONFIG_GPIO_STMPE=y
-# CONFIG_HWMON is not set
+CONFIG_SENSORS_GPIO_FAN=y
+CONFIG_THERMAL=y
+CONFIG_CPU_THERMAL=y
+CONFIG_IMX_THERMAL=y
+CONFIG_POWER_SUPPLY=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_IMX=y
CONFIG_WATCHDOG=y
CONFIG_IMX2_WDT=y
CONFIG_MFD_DA9052_I2C=y
CONFIG_SND_SOC_IMX_SGTL5000=y
CONFIG_SND_SOC_IMX_SPDIF=y
CONFIG_SND_SOC_IMX_MC13783=y
+CONFIG_SND_SOC_TLV320AIC3X=y
CONFIG_SND_SIMPLE_CARD=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_LEDS_TRIGGER_GPIO=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_INTF_DEV_UIE_EMUL=y
+CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_ISL1208=y
CONFIG_RTC_DRV_PCF8563=y
CONFIG_RTC_DRV_MC13XXX=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
+CONFIG_ARCH_MULTI_V4T=y
+CONFIG_ARCH_MULTI_V5=y
+# CONFIG_ARCH_MULTI_V7 is not set
CONFIG_ARCH_INTEGRATOR=y
CONFIG_ARCH_INTEGRATOR_AP=y
CONFIG_ARCH_INTEGRATOR_CP=y
CONFIG_MODVERSIONS=y
CONFIG_ARCH_KEYSTONE=y
CONFIG_ARM_LPAE=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_KEYSTONE=y
CONFIG_SMP=y
CONFIG_PREEMPT=y
CONFIG_AEABI=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
CONFIG_LEDS_TRIGGER_BACKLIGHT=y
CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_KEYSTONE_IRQ=y
+CONFIG_GPIO_SYSCON=y
+CONFIG_TI_DAVINCI_MDIO=y
+CONFIG_MARVELL_PHY=y
+++ /dev/null
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_EMBEDDED=y
-CONFIG_PERF_EVENTS=y
-CONFIG_SLAB=y
-CONFIG_ARCH_SHMOBILE_LEGACY=y
-CONFIG_ARCH_R8A7791=y
-CONFIG_MACH_KOELSCH=y
-# CONFIG_SWP_EMULATE is not set
-CONFIG_CPU_BPREDICT_DISABLE=y
-CONFIG_PL310_ERRATA_588369=y
-CONFIG_ARM_ERRATA_754322=y
-CONFIG_PCI=y
-CONFIG_PCI_RCAR_GEN2=y
-CONFIG_PCI_RCAR_GEN2_PCIE=y
-CONFIG_SMP=y
-CONFIG_SCHED_MC=y
-CONFIG_NR_CPUS=8
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_KEXEC=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_PM_RUNTIME=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_SATA_RCAR=y
-CONFIG_MTD=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_SPI_NOR=y
-CONFIG_EEPROM_AT24=y
-CONFIG_NETDEVICES=y
-# CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-CONFIG_SH_ETH=y
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_VIA is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_SH_SCI=y
-CONFIG_SERIAL_SH_SCI_NR_UARTS=20
-CONFIG_SERIAL_SH_SCI_CONSOLE=y
-CONFIG_I2C=y
-CONFIG_I2C_MUX=y
-CONFIG_I2C_SH_MOBILE=y
-CONFIG_I2C_RCAR=y
-CONFIG_SPI=y
-CONFIG_SPI_RSPI=y
-CONFIG_SPI_SH_MSIOF=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_RCAR=y
-# CONFIG_HWMON is not set
-CONFIG_THERMAL=y
-CONFIG_RCAR_THERMAL=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_DA9210=y
-CONFIG_REGULATOR_GPIO=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_SOC_CAMERA=y
-CONFIG_SOC_CAMERA_PLATFORM=y
-CONFIG_VIDEO_RCAR_VIN=y
-# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
-CONFIG_VIDEO_ADV7180=y
-# CONFIG_HID is not set
-# CONFIG_USB_SUPPORT is not set
-CONFIG_MMC=y
-CONFIG_MMC_SDHI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-# CONFIG_IOMMU_SUPPORT is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_TMPFS=y
-CONFIG_CONFIGFS_FS=y
-# CONFIG_MISC_FILESYSTEMS is not set
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_ARM_UNWIND is not set
CONFIG_SATA_MV=y
CONFIG_NETDEVICES=y
CONFIG_NET_DSA_MV88E6123_61_65=y
+CONFIG_NET_DSA_MV88E6171=y
CONFIG_MV643XX_ETH=y
CONFIG_R8169=y
CONFIG_MARVELL_PHY=y
+CONFIG_MWL8K=m
CONFIG_LIBERTAS=y
CONFIG_LIBERTAS_SDIO=y
CONFIG_INPUT_EVDEV=y
CONFIG_IRQ_DOMAIN_DEBUG=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
+CONFIG_CGROUPS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_EMBEDDED=y
CONFIG_PERF_EVENTS=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
CONFIG_PARTITION_ADVANCED=y
+CONFIG_CMDLINE_PARTITION=y
CONFIG_ARCH_VIRT=y
CONFIG_ARCH_MVEBU=y
CONFIG_MACH_ARMADA_370=y
CONFIG_MACH_ARMADA_XP=y
CONFIG_MACH_DOVE=y
CONFIG_ARCH_BCM=y
-CONFIG_ARCH_BCM_MOBILE=y
+CONFIG_ARCH_BCM_CYGNUS=y
+CONFIG_ARCH_BCM_21664=y
+CONFIG_ARCH_BCM_281XX=y
CONFIG_ARCH_BCM_5301X=y
CONFIG_ARCH_BRCMSTB=y
CONFIG_ARCH_BERLIN=y
CONFIG_CMA_SIZE_MBYTES=64
CONFIG_OMAP_OCP2SCP=y
CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
CONFIG_MTD_SPI_NOR=y
+CONFIG_MTD_UBI=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_AD525X_DPOT=y
CONFIG_AD525X_DPOT_I2C=y
CONFIG_SATA_HIGHBANK=y
CONFIG_SATA_MV=y
CONFIG_NETDEVICES=y
+CONFIG_HIX5HD2_GMAC=y
CONFIG_SUN4I_EMAC=y
CONFIG_MACB=y
CONFIG_NET_CALXEDA_XGMAC=y
CONFIG_XILINX_EMACLITE=y
CONFIG_AT803X_PHY=y
CONFIG_MARVELL_PHY=y
+CONFIG_BROADCOM_PHY=y
CONFIG_ICPLUS_PHY=y
CONFIG_USB_PEGASUS=y
CONFIG_USB_USBNET=y
CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_I2C_EXYNOS5=y
CONFIG_I2C_MV64XXX=y
+CONFIG_I2C_S3C2410=y
CONFIG_I2C_SIRF=y
CONFIG_I2C_TEGRA=y
CONFIG_I2C_ST=y
CONFIG_SPI_TEGRA20_SFLASH=y
CONFIG_SPI_TEGRA20_SLINK=y
CONFIG_SPI_XILINX=y
+CONFIG_SPI_SPIDEV=y
CONFIG_PINCTRL_AS3722=y
CONFIG_PINCTRL_PALMAS=y
+CONFIG_PINCTRL_APQ8084=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_GENERIC_PLATFORM=y
CONFIG_GPIO_DWAPB=y
CONFIG_ST_THERMAL_MEMMAP=y
CONFIG_WATCHDOG=y
CONFIG_XILINX_WATCHDOG=y
+CONFIG_ARM_SP805_WATCHDOG=y
CONFIG_ORION_WATCHDOG=y
CONFIG_SUNXI_WATCHDOG=y
+CONFIG_MESON_WATCHDOG=y
CONFIG_MFD_AS3722=y
CONFIG_MFD_BCM590XX=y
CONFIG_MFD_CROS_EC=y
CONFIG_MFD_CROS_EC_SPI=y
+CONFIG_MFD_MAX77686=y
CONFIG_MFD_MAX8907=y
CONFIG_MFD_SEC_CORE=y
CONFIG_MFD_STMPE=y
CONFIG_REGULATOR_AS3722=y
CONFIG_REGULATOR_BCM590XX=y
CONFIG_REGULATOR_GPIO=y
+CONFIG_MFD_SYSCON=y
+CONFIG_POWER_RESET_SYSCON=y
CONFIG_REGULATOR_MAX8907=y
+CONFIG_REGULATOR_MAX77686=y
CONFIG_REGULATOR_PALMAS=y
CONFIG_REGULATOR_S2MPS11=y
CONFIG_REGULATOR_S5M8767=y
CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
CONFIG_SOUND=y
CONFIG_SND=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_SND_USB_AUDIO=y
CONFIG_SND_SOC=y
CONFIG_SND_SOC_TEGRA=y
CONFIG_SND_SOC_TEGRA_RT5640=y
CONFIG_USB_XHCI_MVEBU=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_TEGRA=y
+CONFIG_USB_EHCI_HCD_STI=y
CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_ISP1760_HCD=y
CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_STI=y
CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_CHIPIDEA=y
CONFIG_MMC_MVSDIO=y
CONFIG_MMC_SUNXI=y
CONFIG_MMC_DW=y
+CONFIG_MMC_DW_IDMAC=y
+CONFIG_MMC_DW_PLTFM=y
CONFIG_MMC_DW_EXYNOS=y
+CONFIG_MMC_DW_ROCKCHIP=y
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
CONFIG_LEDS_GPIO=y
CONFIG_RTC_DRV_AS3722=y
CONFIG_RTC_DRV_DS1307=y
CONFIG_RTC_DRV_MAX8907=y
+CONFIG_RTC_DRV_MAX77686=y
CONFIG_RTC_DRV_PALMAS=y
CONFIG_RTC_DRV_TWL4030=y
CONFIG_RTC_DRV_TPS6586X=y
CONFIG_NVEC_PAZ00=y
CONFIG_QCOM_GSBI=y
CONFIG_COMMON_CLK_QCOM=y
+CONFIG_COMMON_CLK_MAX77686=y
+CONFIG_APQ_MMCC_8084=y
CONFIG_MSM_GCC_8660=y
CONFIG_MSM_MMCC_8960=y
CONFIG_MSM_MMCC_8974=y
CONFIG_PWM=y
CONFIG_PWM_TEGRA=y
CONFIG_PWM_VT8500=y
+CONFIG_PHY_HIX5HD2_SATA=y
CONFIG_OMAP_USB2=y
CONFIG_TI_PIPE3=y
CONFIG_PHY_MIPHY365X=y
+CONFIG_PHY_STIH41X_USB=y
CONFIG_PHY_SUN4I_USB=y
CONFIG_EXT4_FS=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
+CONFIG_NTFS_FS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_UBIFS_FS=y
CONFIG_TMPFS=y
CONFIG_SQUASHFS=y
CONFIG_SQUASHFS_LZO=y
CONFIG_NFS_V3_ACL=y
CONFIG_NFS_V4=y
CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
CONFIG_PRINTK_TIME=y
CONFIG_DEBUG_FS=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_SATA_MV=y
CONFIG_NETDEVICES=y
CONFIG_NET_DSA_MV88E6123_61_65=y
+CONFIG_NET_DSA_MV88E6171=y
CONFIG_MV643XX_ETH=y
CONFIG_R8169=y
CONFIG_MARVELL_PHY=y
+CONFIG_MWL8K=m
CONFIG_LIBERTAS=y
CONFIG_LIBERTAS_SDIO=y
CONFIG_INPUT_EVDEV=y
CONFIG_DEVTMPFS=y
CONFIG_DEVTMPFS_MOUNT=y
CONFIG_MTD=y
+CONFIG_MTD_BLOCK=y
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_AHCI_MVEBU=y
CONFIG_SATA_MV=y
CONFIG_NETDEVICES=y
+CONFIG_NET_DSA_MV88E6171=y
CONFIG_MV643XX_ETH=y
CONFIG_MVNETA=y
CONFIG_MVPP2=y
CONFIG_MARVELL_PHY=y
+CONFIG_FIXED_PHY=y
CONFIG_MWIFIEX=y
CONFIG_MWIFIEX_SDIO=y
CONFIG_INPUT_EVDEV=y
CONFIG_SERIAL_8250_DW=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
CONFIG_I2C_MV64XXX=y
CONFIG_SPI=y
CONFIG_SPI_ORION=y
CONFIG_SND=y
CONFIG_SND_SOC=y
CONFIG_SND_KIRKWOOD_SOC=y
-CONFIG_SND_KIRKWOOD_SOC_ARMADA370_DB=y
+CONFIG_SND_SOC_CS42L51_I2C=y
+CONFIG_SND_SOC_SPDIF=y
+CONFIG_SND_SIMPLE_CARD=y
CONFIG_USB=y
CONFIG_USB_XHCI_HCD=y
CONFIG_USB_XHCI_MVEBU=y
CONFIG_MMC_SDHCI=y
CONFIG_MMC_SDHCI_PLTFM=y
CONFIG_MMC_SDHCI_DOVE=y
+CONFIG_MMC_SDHCI_PXAV3=y
CONFIG_MMC_MVSDIO=y
CONFIG_LEDS_GPIO=y
CONFIG_LEDS_CLASS=y
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_FPE_NWFPE=y
CONFIG_NET=y
CONFIG_PACKET=y
CONFIG_UNIX=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_MTD_ONENAND_GENERIC=y
-CONFIG_PROC_DEVICETREE=y
CONFIG_BLK_DEV_LOOP=y
CONFIG_BLK_DEV_CRYPTOLOOP=y
CONFIG_BLK_DEV_RAM=y
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_INPUT_EVDEV=y
# CONFIG_KEYBOARD_ATKBD is not set
CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_STMPE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_SERIO is not set
# CONFIG_LEGACY_PTYS is not set
CONFIG_SERIAL_AMBA_PL011=y
CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_NOMADIK=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_GPIO=y
-CONFIG_I2C_NOMADIK=y
CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_STMPE=y
# CONFIG_HWMON is not set
+CONFIG_MFD_STMPE=y
CONFIG_REGULATOR=y
CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
# CONFIG_MMC_BLOCK_BOUNCE is not set
CONFIG_MMC_ARMMMCI=y
CONFIG_NEW_LEDS=y
CONFIG_NLS_ASCII=y
CONFIG_NLS_ISO8859_1=y
CONFIG_NLS_ISO8859_15=y
+CONFIG_DEBUG_INFO=y
# CONFIG_ENABLE_MUST_CHECK is not set
CONFIG_DEBUG_FS=y
# CONFIG_SCHED_DEBUG is not set
# CONFIG_DEBUG_PREEMPT is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
CONFIG_CRYPTO_MD5=y
CONFIG_CRYPTO_SHA1=y
CONFIG_CRYPTO_DES=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
# CONFIG_INET_LRO is not set
-CONFIG_IPV6=y
CONFIG_NETFILTER=y
CONFIG_CAN=m
CONFIG_CAN_C_CAN=m
CONFIG_MTD_CFI=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ECC_BCH=y
CONFIG_MTD_NAND_OMAP2=y
CONFIG_MTD_ONENAND=y
CONFIG_MTD_ONENAND_VERIFY_WRITE=y
CONFIG_SCSI_SCAN_ASYNC=y
CONFIG_MD=y
CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_CADENCE is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_HISILICON is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
CONFIG_KS8851=y
CONFIG_KS8851_MLL=y
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_QUALCOMM is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
CONFIG_SMC91X=y
CONFIG_SMSC911X=y
+# CONFIG_NET_VENDOR_STMICRO is not set
CONFIG_TI_CPSW=y
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
CONFIG_AT803X_PHY=y
CONFIG_SMSC_PHY=y
CONFIG_USB_USBNET=y
CONFIG_KEYBOARD_TWL4030=y
CONFIG_INPUT_TOUCHSCREEN=y
CONFIG_TOUCHSCREEN_ADS7846=m
+CONFIG_TOUCHSCREEN_EDT_FT5X06=m
CONFIG_TOUCHSCREEN_TSC2005=m
CONFIG_TOUCHSCREEN_TSC2007=m
CONFIG_INPUT_MISC=y
CONFIG_SND_DEBUG=y
CONFIG_SND_USB_AUDIO=m
CONFIG_SND_SOC=m
+CONFIG_SND_EDMA_SOC=m
+CONFIG_SND_AM33XX_SOC_EVM=m
CONFIG_SND_OMAP_SOC=m
CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m
CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m
CONFIG_USB=y
CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
CONFIG_USB_MON=y
+CONFIG_USB_XHCI_HCD=m
CONFIG_USB_WDM=y
CONFIG_USB_STORAGE=y
CONFIG_USB_DWC3=m
CONFIG_EXTCON=y
CONFIG_EXTCON_PALMAS=y
CONFIG_PWM=y
+CONFIG_PWM_TIECAP=y
+CONFIG_PWM_TIEHRPWM=y
CONFIG_PWM_TWL=y
CONFIG_PWM_TWL_LED=y
CONFIG_OMAP_USB2=y
CONFIG_FANOTIFY=y
CONFIG_QUOTA=y
CONFIG_QFMT_V2=y
-CONFIG_AUTOFS4_FS=y
+CONFIG_AUTOFS4_FS=m
CONFIG_MSDOS_FS=y
CONFIG_VFAT_FS=y
CONFIG_TMPFS=y
CONFIG_MODULE_FORCE_LOAD=y
CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
-# CONFIG_LBDAF is not set
+CONFIG_LBDAF=y
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_SOC_SAM_V7=y
CONFIG_SOC_SAMA5D3=y
CONFIG_SOC_SAMA5D4=y
-CONFIG_MACH_SAMA5_DT=y
CONFIG_AEABI=y
CONFIG_UACCESS_WITH_MEMCPY=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_KEXEC=y
CONFIG_AUTO_ZRELADDR=y
CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_KERNEL_MODE_NEON=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
CONFIG_PM_RUNTIME=y
CONFIG_PM_DEBUG=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_DRV_AT91RM9200=y
CONFIG_DMADEVICES=y
+CONFIG_AT_XDMAC=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_IIO=y
CONFIG_AT91_ADC=y
CONFIG_PWM=y
CONFIG_PWM_ATMEL=y
+CONFIG_PWM_ATMEL_TCB=y
CONFIG_EXT4_FS=y
CONFIG_FANOTIFY=y
CONFIG_VFAT_FS=y
CONFIG_ARCH_R8A7790=y
CONFIG_ARCH_R8A7791=y
CONFIG_ARCH_R8A7794=y
-CONFIG_MACH_KOELSCH=y
CONFIG_MACH_LAGER=y
CONFIG_MACH_MARZEN=y
# CONFIG_SWP_EMULATE is not set
CONFIG_SND_SOC=y
CONFIG_SND_SOC_SH4_FSI=y
CONFIG_SND_SOC_RCAR=y
+CONFIG_SND_SOC_AK4642=y
CONFIG_SND_SOC_WM8978=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_RTC_DRV_S35390A=y
CONFIG_DMADEVICES=y
CONFIG_SH_DMAE=y
+CONFIG_RCAR_AUDMAC_PP=y
+CONFIG_RCAR_DMAC=y
# CONFIG_IOMMU_SUPPORT is not set
CONFIG_PWM=y
CONFIG_PWM_RENESAS_TPU=y
-CONFIG_EXPERIMENTAL=y
CONFIG_SYSVIPC=y
+CONFIG_FHANDLE=y
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
CONFIG_OPROFILE=y
CONFIG_MODULES=y
CONFIG_MODULE_UNLOAD=y
-CONFIG_HOTPLUG=y
# CONFIG_LBDAF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_IOSCHED_DEADLINE is not set
# CONFIG_IOSCHED_CFQ is not set
CONFIG_ARCH_SOCFPGA=y
-CONFIG_MACH_SOCFPGA_CYCLONE5=y
CONFIG_ARM_THUMBEE=y
-# CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_HIGH_RES_TIMERS=y
CONFIG_SMP=y
CONFIG_NR_CPUS=2
CONFIG_AEABI=y
CONFIG_ZBOOT_ROM_TEXT=0x0
CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE=""
CONFIG_VFP=y
CONFIG_NEON=y
CONFIG_NET=y
CONFIG_IP_PNP_DHCP=y
CONFIG_IP_PNP_BOOTP=y
CONFIG_IP_PNP_RARP=y
+CONFIG_IPV6=y
+CONFIG_NETWORK_PHY_TIMESTAMPING=y
+CONFIG_VLAN_8021Q=y
+CONFIG_VLAN_8021Q_GVRP=y
CONFIG_CAN=y
-CONFIG_CAN_RAW=y
-CONFIG_CAN_BCM=y
-CONFIG_CAN_GW=y
-CONFIG_CAN_DEV=y
-CONFIG_CAN_CALC_BITTIMING=y
CONFIG_CAN_C_CAN=y
CONFIG_CAN_C_CAN_PLATFORM=y
CONFIG_CAN_DEBUG_DEVICES=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_DEVTMPFS=y
-CONFIG_PROC_DEVICETREE=y
+CONFIG_DEVTMPFS_MOUNT=y
CONFIG_BLK_DEV_RAM=y
CONFIG_BLK_DEV_RAM_COUNT=2
CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_SRAM=y
CONFIG_SCSI=y
# CONFIG_SCSI_PROC_FS is not set
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_NETDEVICES=y
CONFIG_STMMAC_ETH=y
+CONFIG_DWMAC_SOCFPGA=y
CONFIG_MICREL_PHY=y
-# CONFIG_STMMAC_PHY_ID_ZERO_WORKAROUND is not set
CONFIG_INPUT_EVDEV=y
-CONFIG_DWMAC_SOCFPGA=y
-CONFIG_PPS=y
-CONFIG_NETWORK_PHY_TIMESTAMPING=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_VLAN_8021Q=y
-CONFIG_VLAN_8021Q_GVRP=y
-CONFIG_GARP=y
-CONFIG_IPV6=y
# CONFIG_SERIO_SERPORT is not set
CONFIG_SERIO_AMBAKMI=y
CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_8250_NR_UARTS=2
CONFIG_SERIAL_8250_RUNTIME_UARTS=2
CONFIG_SERIAL_8250_DW=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
CONFIG_GPIOLIB=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_DWAPB=y
-# CONFIG_RTC_HCTOSYS is not set
+CONFIG_PMBUS=y
+CONFIG_SENSORS_LTC2978=y
+CONFIG_SENSORS_LTC2978_REGULATOR=y
CONFIG_WATCHDOG=y
CONFIG_DW_WATCHDOG=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_USB=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_DWC2_HOST=y
+CONFIG_MMC=y
+CONFIG_MMC_DW=y
CONFIG_EXT2_FS=y
CONFIG_EXT2_FS_XATTR=y
CONFIG_EXT2_FS_POSIX_ACL=y
CONFIG_EXT3_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-# CONFIG_DNOTIFY is not set
-# CONFIG_INOTIFY_USER is not set
-CONFIG_FHANDLE=y
+CONFIG_EXT4_FS=y
CONFIG_VFAT_FS=y
CONFIG_NTFS_FS=y
CONFIG_NTFS_RW=y
CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
+CONFIG_CONFIGFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
CONFIG_NLS_CODEPAGE_437=y
CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
CONFIG_MAGIC_SYSRQ=y
CONFIG_DETECT_HUNG_TASK=y
# CONFIG_SCHED_DEBUG is not set
-CONFIG_DEBUG_INFO=y
CONFIG_ENABLE_DEFAULT_TRACERS=y
CONFIG_DEBUG_USER=y
CONFIG_XZ_DEC=y
-CONFIG_I2C=y
-CONFIG_I2C_DESIGNWARE_CORE=y
-CONFIG_I2C_DESIGNWARE_PLATFORM=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_MMC=y
-CONFIG_MMC_DW=y
-CONFIG_PM=y
-CONFIG_SUSPEND=y
-CONFIG_MMC_UNSAFE_RESUME=y
-CONFIG_USB=y
-CONFIG_USB_DWC2=y
-CONFIG_USB_DWC2_HOST=y
-CONFIG_USB_DWC2_PLATFORM=y
CONFIG_SUNXI_WATCHDOG=y
CONFIG_MFD_AXP20X=y
CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_REGULATOR_GPIO=y
CONFIG_USB=y
CONFIG_USB_EHCI_HCD=y
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
CONFIG_EEPROM_AT24=y
-CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
-CONFIG_SCSI_MULTI_LUN=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
CONFIG_SATA_AHCI=y
return val;
}
+static inline u64 arch_counter_get_cntpct(void)
+{
+ u64 cval;
+
+ isb();
+ asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (cval));
+ return cval;
+}
+
static inline u64 arch_counter_get_cntvct(void)
{
u64 cval;
/*
* Enters CPU idle mode
*/
- int (*do_idle)(void);
+ int (*do_idle)(unsigned long mode);
/*
* Sets boot address of specified physical CPU
*/
* Initializes L2 cache
*/
int (*l2x0_init)(void);
+ /*
+ * Enter system-wide suspend.
+ */
+ int (*suspend)(void);
+ /*
+ * Restore state of privileged hardware after system-wide suspend.
+ */
+ int (*resume)(void);
};
/* Global pointer for current firmware_ops structure, can't be NULL. */
* Generic IO read/write. These perform native-endian accesses. Note
* that some architectures will want to re-define __raw_{read,write}w.
*/
-extern void __raw_writesb(void __iomem *addr, const void *data, int bytelen);
-extern void __raw_writesw(void __iomem *addr, const void *data, int wordlen);
-extern void __raw_writesl(void __iomem *addr, const void *data, int longlen);
+void __raw_writesb(volatile void __iomem *addr, const void *data, int bytelen);
+void __raw_writesw(volatile void __iomem *addr, const void *data, int wordlen);
+void __raw_writesl(volatile void __iomem *addr, const void *data, int longlen);
-extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen);
-extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen);
-extern void __raw_readsl(const void __iomem *addr, void *data, int longlen);
+void __raw_readsb(const volatile void __iomem *addr, void *data, int bytelen);
+void __raw_readsw(const volatile void __iomem *addr, void *data, int wordlen);
+void __raw_readsl(const volatile void __iomem *addr, void *data, int longlen);
#if __LINUX_ARM_ARCH__ < 6
/*
* writeback addressing modes as these incur a significant performance
* overhead (the address generation must be emulated in software).
*/
+#define __raw_writew __raw_writew
static inline void __raw_writew(u16 val, volatile void __iomem *addr)
{
asm volatile("strh %1, %0"
: "r" (val));
}
+#define __raw_readw __raw_readw
static inline u16 __raw_readw(const volatile void __iomem *addr)
{
u16 val;
}
#endif
+#define __raw_writeb __raw_writeb
static inline void __raw_writeb(u8 val, volatile void __iomem *addr)
{
asm volatile("strb %1, %0"
: "r" (val));
}
+#define __raw_writel __raw_writel
static inline void __raw_writel(u32 val, volatile void __iomem *addr)
{
asm volatile("str %1, %0"
: "r" (val));
}
+#define __raw_readb __raw_readb
static inline u8 __raw_readb(const volatile void __iomem *addr)
{
u8 val;
return val;
}
+#define __raw_readl __raw_readl
static inline u32 __raw_readl(const volatile void __iomem *addr)
{
u32 val;
#define insl(p,d,l) __raw_readsl(__io(p),d,l)
#endif
-#define outb_p(val,port) outb((val),(port))
-#define outw_p(val,port) outw((val),(port))
-#define outl_p(val,port) outl((val),(port))
-#define inb_p(port) inb((port))
-#define inw_p(port) inw((port))
-#define inl_p(port) inl((port))
-
-#define outsb_p(port,from,len) outsb(port,from,len)
-#define outsw_p(port,from,len) outsw(port,from,len)
-#define outsl_p(port,from,len) outsl(port,from,len)
-#define insb_p(port,to,len) insb(port,to,len)
-#define insw_p(port,to,len) insw(port,to,len)
-#define insl_p(port,to,len) insl(port,to,len)
-
/*
* String version of IO memory access ops:
*/
#define iounmap __arm_iounmap
/*
- * io{read,write}{8,16,32} macros
+ * io{read,write}{16,32}be() macros
*/
-#ifndef ioread8
-#define ioread8(p) ({ unsigned int __v = __raw_readb(p); __iormb(); __v; })
-#define ioread16(p) ({ unsigned int __v = le16_to_cpu((__force __le16)__raw_readw(p)); __iormb(); __v; })
-#define ioread32(p) ({ unsigned int __v = le32_to_cpu((__force __le32)__raw_readl(p)); __iormb(); __v; })
-
-#define ioread16be(p) ({ unsigned int __v = be16_to_cpu((__force __be16)__raw_readw(p)); __iormb(); __v; })
-#define ioread32be(p) ({ unsigned int __v = be32_to_cpu((__force __be32)__raw_readl(p)); __iormb(); __v; })
-
-#define iowrite8(v,p) ({ __iowmb(); __raw_writeb(v, p); })
-#define iowrite16(v,p) ({ __iowmb(); __raw_writew((__force __u16)cpu_to_le16(v), p); })
-#define iowrite32(v,p) ({ __iowmb(); __raw_writel((__force __u32)cpu_to_le32(v), p); })
+#define ioread16be(p) ({ __u16 __v = be16_to_cpu((__force __be16)__raw_readw(p)); __iormb(); __v; })
+#define ioread32be(p) ({ __u32 __v = be32_to_cpu((__force __be32)__raw_readl(p)); __iormb(); __v; })
-#define iowrite16be(v,p) ({ __iowmb(); __raw_writew((__force __u16)cpu_to_be16(v), p); })
-#define iowrite32be(v,p) ({ __iowmb(); __raw_writel((__force __u32)cpu_to_be32(v), p); })
-
-#define ioread8_rep(p,d,c) __raw_readsb(p,d,c)
-#define ioread16_rep(p,d,c) __raw_readsw(p,d,c)
-#define ioread32_rep(p,d,c) __raw_readsl(p,d,c)
-
-#define iowrite8_rep(p,s,c) __raw_writesb(p,s,c)
-#define iowrite16_rep(p,s,c) __raw_writesw(p,s,c)
-#define iowrite32_rep(p,s,c) __raw_writesl(p,s,c)
+#define iowrite16be(v,p) ({ __iowmb(); __raw_writew((__force __u16)cpu_to_be16(v), p); })
+#define iowrite32be(v,p) ({ __iowmb(); __raw_writel((__force __u32)cpu_to_be32(v), p); })
+#ifndef ioport_map
+#define ioport_map ioport_map
extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
+#endif
+#ifndef ioport_unmap
+#define ioport_unmap ioport_unmap
extern void ioport_unmap(void __iomem *addr);
#endif
struct pci_dev;
+#define pci_iounmap pci_iounmap
extern void pci_iounmap(struct pci_dev *dev, void __iomem *addr);
+/*
+ * Convert a physical pointer to a virtual kernel pointer for /dev/mem
+ * access
+ */
+#define xlate_dev_mem_ptr(p) __va(p)
+
+/*
+ * Convert a virtual cached pointer to an uncached pointer
+ */
+#define xlate_dev_kmem_ptr(p) p
+
+#include <asm-generic/io.h>
+
/*
* can the hardware map this into one segment or not, given no other
* constraints.
extern int devmem_is_allowed(unsigned long pfn);
#endif
-/*
- * Convert a physical pointer to a virtual kernel pointer for /dev/mem
- * access
- */
-#define xlate_dev_mem_ptr(p) __va(p)
-
-/*
- * Convert a virtual cached pointer to an uncached pointer
- */
-#define xlate_dev_kmem_ptr(p) p
-
/*
* Register ISA memory and port locations for glibc iopl/inb/outb
* emulation.
* translation for translating DMA addresses. Use the driver
* DMA support - see dma-mapping.h.
*/
+#define virt_to_phys virt_to_phys
static inline phys_addr_t virt_to_phys(const volatile void *x)
{
return __virt_to_phys((unsigned long)(x));
}
+#define phys_to_virt phys_to_virt
static inline void *phys_to_virt(phys_addr_t x)
{
return (void *)__phys_to_virt(x);
#endif
#ifdef CONFIG_VIRT_TO_BUS
+#define virt_to_bus virt_to_bus
static inline __deprecated unsigned long virt_to_bus(void *x)
{
return __virt_to_bus((unsigned long)x);
}
+#define bus_to_virt bus_to_virt
static inline __deprecated void *bus_to_virt(unsigned long x)
{
return (void *)__bus_to_virt(x);
#ifndef __ARM_PERF_EVENT_H__
#define __ARM_PERF_EVENT_H__
-#ifdef CONFIG_HW_PERF_EVENTS
+#ifdef CONFIG_PERF_EVENTS
struct pt_regs;
extern unsigned long perf_instruction_pointer(struct pt_regs *regs);
extern unsigned long perf_misc_flags(struct pt_regs *regs);
#include <linux/interrupt.h>
#include <linux/perf_event.h>
+#include <asm/cputype.h>
+
/*
* struct arm_pmu_platdata - ARM PMU platform data
*
/*
* The events that are active on the PMU for the given index.
*/
- struct perf_event **events;
+ struct perf_event *events[ARMPMU_MAX_HWEVENTS];
/*
* A 1 bit for an index indicates that the counter is being used for
* an event. A 0 means that the counter can be used.
*/
- unsigned long *used_mask;
+ DECLARE_BITMAP(used_mask, ARMPMU_MAX_HWEVENTS);
/*
* Hardware lock to serialize accesses to PMU registers. Needed for the
* read/modify/write sequences.
*/
raw_spinlock_t pmu_lock;
+
+ /*
+ * When using percpu IRQs, we need a percpu dev_id. Place it here as we
+ * already have to allocate this struct per cpu.
+ */
+ struct arm_pmu *percpu_pmu;
};
struct arm_pmu {
struct mutex reserve_mutex;
u64 max_period;
struct platform_device *plat_device;
- struct pmu_hw_events *(*get_hw_events)(void);
+ struct pmu_hw_events __percpu *hw_events;
+ struct notifier_block hotplug_nb;
};
#define to_arm_pmu(p) (container_of(p, struct arm_pmu, pmu))
[PERF_COUNT_HW_CACHE_RESULT_MAX],
u32 raw_event_mask);
+struct pmu_probe_info {
+ unsigned int cpuid;
+ unsigned int mask;
+ int (*init)(struct arm_pmu *);
+};
+
+#define PMU_PROBE(_cpuid, _mask, _fn) \
+{ \
+ .cpuid = (_cpuid), \
+ .mask = (_mask), \
+ .init = (_fn), \
+}
+
+#define ARM_PMU_PROBE(_cpuid, _fn) \
+ PMU_PROBE(_cpuid, ARM_CPU_PART_MASK, _fn)
+
+#define ARM_PMU_XSCALE_MASK ((0xff << 24) | ARM_CPU_XSCALE_ARCH_MASK)
+
+#define XSCALE_PMU_PROBE(_version, _fn) \
+ PMU_PROBE(ARM_CPU_IMP_INTEL << 24 | _version, ARM_PMU_XSCALE_MASK, _fn)
+
#endif /* CONFIG_HW_PERF_EVENTS */
#endif /* __ARM_PMU_H__ */
__u32 extra[2]; /* Xscale 'acc' register, etc */
};
-struct arm_restart_block {
- union {
- /* For user cache flushing */
- struct {
- unsigned long start;
- unsigned long end;
- } cache;
- };
-};
-
/*
* low level task data that entry.S needs immediate access to.
* __switch_to() assumes cpu_context follows immediately after cpu_domain.
unsigned long thumbee_state; /* ThumbEE Handler Base register */
#endif
struct restart_block restart_block;
- struct arm_restart_block arm_restart_block;
};
#define INIT_THREAD_INFO(tsk) \
--- /dev/null
+/* Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ * Modified for ASM9260 by Oleksij Remepl <linux@rempel-privat.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+ .macro addruart, rp, rv, tmp
+ ldr \rp, = CONFIG_DEBUG_UART_PHYS
+ ldr \rv, = CONFIG_DEBUG_UART_VIRT
+ .endm
+
+ .macro waituart,rd,rx
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #0x50] @ TXDATA
+ .endm
+
+ .macro busyuart,rd,rx
+1002: ldr \rd, [\rx, #0x60] @ STAT
+ tst \rd, #1 << 27 @ TXEMPTY
+ beq 1002b @ wait until transmit done
+ .endm
--- /dev/null
+/*
+ * Renesas SCIF(A) debugging macro include header
+ *
+ * Based on r8a7790.S
+ *
+ * Copyright (C) 2012-2013 Renesas Electronics Corporation
+ * Copyright (C) 1994-1999 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#define SCIF_PHYS CONFIG_DEBUG_UART_PHYS
+#define SCIF_VIRT ((SCIF_PHYS & 0x00ffffff) | 0xfd000000)
+
+#if CONFIG_DEBUG_UART_PHYS < 0xe6e00000
+/* SCIFA */
+#define FTDR 0x20
+#define FSR 0x14
+#else
+/* SCIF */
+#define FTDR 0x0c
+#define FSR 0x10
+#endif
+
+#define TDFE (1 << 5)
+#define TEND (1 << 6)
+
+ .macro addruart, rp, rv, tmp
+ ldr \rp, =SCIF_PHYS
+ ldr \rv, =SCIF_VIRT
+ .endm
+
+ .macro waituart, rd, rx
+1001: ldrh \rd, [\rx, #FSR]
+ tst \rd, #TDFE
+ beq 1001b
+ .endm
+
+ .macro senduart, rd, rx
+ strb \rd, [\rx, #FTDR]
+ ldrh \rd, [\rx, #FSR]
+ bic \rd, \rd, #TEND
+ strh \rd, [\rx, #FSR]
+ .endm
+
+ .macro busyuart, rd, rx
+1001: ldrh \rd, [\rx, #FSR]
+ tst \rd, #TEND
+ beq 1001b
+ .endm
--- /dev/null
+/* arch/arm/include/debug/sa1100.S
+ *
+ * Debugging macro include header
+ *
+ * Copyright (C) 1994-1999 Russell King
+ * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+*/
+
+#define UTCR3 0x0c
+#define UTDR 0x14
+#define UTSR1 0x20
+#define UTCR3_TXE 0x00000002 /* Transmit Enable */
+#define UTSR1_TBY 0x00000001 /* Transmitter BusY (read) */
+#define UTSR1_TNF 0x00000004 /* Transmit FIFO Not Full (read) */
+
+ .macro addruart, rp, rv, tmp
+ mrc p15, 0, \rp, c1, c0
+ tst \rp, #1 @ MMU enabled?
+ moveq \rp, #0x80000000 @ physical base address
+ movne \rp, #0xf8000000 @ virtual address
+
+ @ We probe for the active serial port here, coherently with
+ @ the comment in arch/arm/mach-sa1100/include/mach/uncompress.h.
+ @ We assume r1 can be clobbered.
+
+ @ see if Ser3 is active
+ add \rp, \rp, #0x00050000
+ ldr \rv, [\rp, #UTCR3]
+ tst \rv, #UTCR3_TXE
+
+ @ if Ser3 is inactive, then try Ser1
+ addeq \rp, \rp, #(0x00010000 - 0x00050000)
+ ldreq \rv, [\rp, #UTCR3]
+ tsteq \rv, #UTCR3_TXE
+
+ @ if Ser1 is inactive, then try Ser2
+ addeq \rp, \rp, #(0x00030000 - 0x00010000)
+ ldreq \rv, [\rp, #UTCR3]
+ tsteq \rv, #UTCR3_TXE
+
+ @ clear top bits, and generate both phys and virt addresses
+ lsl \rp, \rp, #8
+ lsr \rp, \rp, #8
+ orr \rv, \rp, #0xf8000000 @ virtual
+ orr \rp, \rp, #0x80000000 @ physical
+
+ .endm
+
+ .macro senduart,rd,rx
+ str \rd, [\rx, #UTDR]
+ .endm
+
+ .macro waituart,rd,rx
+1001: ldr \rd, [\rx, #UTSR1]
+ tst \rd, #UTSR1_TNF
+ beq 1001b
+ .endm
+
+ .macro busyuart,rd,rx
+1001: ldr \rd, [\rx, #UTSR1]
+ tst \rd, #UTSR1_TBY
+ bne 1001b
+ .endm
#define __NR_seccomp (__NR_SYSCALL_BASE+383)
#define __NR_getrandom (__NR_SYSCALL_BASE+384)
#define __NR_memfd_create (__NR_SYSCALL_BASE+385)
+#define __NR_bpf (__NR_SYSCALL_BASE+386)
/*
* The following SWIs are ARM private.
obj-$(CONFIG_CPU_PJ4) += pj4-cp0.o
obj-$(CONFIG_CPU_PJ4B) += pj4-cp0.o
obj-$(CONFIG_IWMMXT) += iwmmxt.o
-obj-$(CONFIG_PERF_EVENTS) += perf_regs.o
+obj-$(CONFIG_PERF_EVENTS) += perf_regs.o perf_callchain.o
obj-$(CONFIG_HW_PERF_EVENTS) += perf_event.o perf_event_cpu.o
AFLAGS_iwmmxt.o := -Wa,-mcpu=iwmmxt
obj-$(CONFIG_ARM_CPU_TOPOLOGY) += topology.o
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+#include <linux/compiler.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/dma-mapping.h>
* GCC 3.2.x: miscompiles NEW_AUX_ENT in fs/binfmt_elf.c
* (http://gcc.gnu.org/PR8896) and incorrect structure
* initialisation in fs/jffs2/erase.c
+ * GCC 4.8.0-4.8.2: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58854
+ * miscompiles find_get_entry(), and can result in EXT3 and EXT4
+ * filesystem corruption (possibly other FS too).
*/
+#ifdef __GNUC__
#if (__GNUC__ == 3 && __GNUC_MINOR__ < 3)
#error Your compiler is too buggy; it is known to miscompile kernels.
-#error Known good compilers: 3.3
+#error Known good compilers: 3.3, 4.x
+#endif
+#if GCC_VERSION >= 40800 && GCC_VERSION < 40803
+#error Your compiler is too buggy; it is known to miscompile kernels
+#error and result in filesystem corruption and oopses.
+#endif
#endif
int main(void)
CALL(sys_seccomp)
CALL(sys_getrandom)
/* 385 */ CALL(sys_memfd_create)
+ CALL(sys_bpf)
#ifndef syscalls_counted
.equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls
#define syscalls_counted
--- /dev/null
+/*
+ * ARM callchain support
+ *
+ * Copyright (C) 2009 picoChip Designs, Ltd., Jamie Iles
+ * Copyright (C) 2010 ARM Ltd., Will Deacon <will.deacon@arm.com>
+ *
+ * This code is based on the ARM OProfile backtrace code.
+ */
+#include <linux/perf_event.h>
+#include <linux/uaccess.h>
+
+#include <asm/stacktrace.h>
+
+/*
+ * The registers we're interested in are at the end of the variable
+ * length saved register structure. The fp points at the end of this
+ * structure so the address of this struct is:
+ * (struct frame_tail *)(xxx->fp)-1
+ *
+ * This code has been adapted from the ARM OProfile support.
+ */
+struct frame_tail {
+ struct frame_tail __user *fp;
+ unsigned long sp;
+ unsigned long lr;
+} __attribute__((packed));
+
+/*
+ * Get the return address for a single stackframe and return a pointer to the
+ * next frame tail.
+ */
+static struct frame_tail __user *
+user_backtrace(struct frame_tail __user *tail,
+ struct perf_callchain_entry *entry)
+{
+ struct frame_tail buftail;
+ unsigned long err;
+
+ if (!access_ok(VERIFY_READ, tail, sizeof(buftail)))
+ return NULL;
+
+ pagefault_disable();
+ err = __copy_from_user_inatomic(&buftail, tail, sizeof(buftail));
+ pagefault_enable();
+
+ if (err)
+ return NULL;
+
+ perf_callchain_store(entry, buftail.lr);
+
+ /*
+ * Frame pointers should strictly progress back up the stack
+ * (towards higher addresses).
+ */
+ if (tail + 1 >= buftail.fp)
+ return NULL;
+
+ return buftail.fp - 1;
+}
+
+void
+perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
+{
+ struct frame_tail __user *tail;
+
+ if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
+ /* We don't support guest os callchain now */
+ return;
+ }
+
+ perf_callchain_store(entry, regs->ARM_pc);
+
+ if (!current->mm)
+ return;
+
+ tail = (struct frame_tail __user *)regs->ARM_fp - 1;
+
+ while ((entry->nr < PERF_MAX_STACK_DEPTH) &&
+ tail && !((unsigned long)tail & 0x3))
+ tail = user_backtrace(tail, entry);
+}
+
+/*
+ * Gets called by walk_stackframe() for every stackframe. This will be called
+ * whist unwinding the stackframe and is like a subroutine return so we use
+ * the PC.
+ */
+static int
+callchain_trace(struct stackframe *fr,
+ void *data)
+{
+ struct perf_callchain_entry *entry = data;
+ perf_callchain_store(entry, fr->pc);
+ return 0;
+}
+
+void
+perf_callchain_kernel(struct perf_callchain_entry *entry, struct pt_regs *regs)
+{
+ struct stackframe fr;
+
+ if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
+ /* We don't support guest os callchain now */
+ return;
+ }
+
+ arm_get_current_stackframe(regs, &fr);
+ walk_stackframe(&fr, callchain_trace, entry);
+}
+
+unsigned long perf_instruction_pointer(struct pt_regs *regs)
+{
+ if (perf_guest_cbs && perf_guest_cbs->is_in_guest())
+ return perf_guest_cbs->get_guest_ip();
+
+ return instruction_pointer(regs);
+}
+
+unsigned long perf_misc_flags(struct pt_regs *regs)
+{
+ int misc = 0;
+
+ if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
+ if (perf_guest_cbs->is_user_mode())
+ misc |= PERF_RECORD_MISC_GUEST_USER;
+ else
+ misc |= PERF_RECORD_MISC_GUEST_KERNEL;
+ } else {
+ if (user_mode(regs))
+ misc |= PERF_RECORD_MISC_USER;
+ else
+ misc |= PERF_RECORD_MISC_KERNEL;
+ }
+
+ return misc;
+}
* Copyright (C) 2010 ARM Ltd., Will Deacon <will.deacon@arm.com>
*
* This code is based on the sparc64 perf event code, which is in turn based
- * on the x86 code. Callchain code is based on the ARM OProfile backtrace
- * code.
+ * on the x86 code.
*/
#define pr_fmt(fmt) "hw perfevents: " fmt
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/pm_runtime.h>
-#include <linux/uaccess.h>
#include <linux/irq.h>
#include <linux/irqdesc.h>
#include <asm/irq_regs.h>
#include <asm/pmu.h>
-#include <asm/stacktrace.h>
static int
armpmu_map_cache_event(const unsigned (*cache_map)
u32 raw_event_mask)
{
u64 config = event->attr.config;
+ int type = event->attr.type;
- switch (event->attr.type) {
+ if (type == event->pmu->type)
+ return armpmu_map_raw_event(raw_event_mask, config);
+
+ switch (type) {
case PERF_TYPE_HARDWARE:
return armpmu_map_hw_event(event_map, config);
case PERF_TYPE_HW_CACHE:
armpmu_del(struct perf_event *event, int flags)
{
struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
- struct pmu_hw_events *hw_events = armpmu->get_hw_events();
+ struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events);
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
armpmu_add(struct perf_event *event, int flags)
{
struct arm_pmu *armpmu = to_arm_pmu(event->pmu);
- struct pmu_hw_events *hw_events = armpmu->get_hw_events();
+ struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events);
struct hw_perf_event *hwc = &event->hw;
int idx;
int err = 0;
{
struct perf_event *sibling, *leader = event->group_leader;
struct pmu_hw_events fake_pmu;
- DECLARE_BITMAP(fake_used_mask, ARMPMU_MAX_HWEVENTS);
/*
* Initialise the fake PMU. We only need to populate the
* used_mask for the purposes of validation.
*/
- memset(fake_used_mask, 0, sizeof(fake_used_mask));
- fake_pmu.used_mask = fake_used_mask;
+ memset(&fake_pmu.used_mask, 0, sizeof(fake_pmu.used_mask));
if (!validate_event(&fake_pmu, leader))
return -EINVAL;
int ret;
u64 start_clock, finish_clock;
- if (irq_is_percpu(irq))
- dev = *(void **)dev;
- armpmu = dev;
+ /*
+ * we request the IRQ with a (possibly percpu) struct arm_pmu**, but
+ * the handlers expect a struct arm_pmu*. The percpu_irq framework will
+ * do any necessary shifting, we just need to perform the first
+ * dereference.
+ */
+ armpmu = *(void **)dev;
plat_device = armpmu->plat_device;
plat = dev_get_platdata(&plat_device->dev);
start_clock = sched_clock();
if (plat && plat->handle_irq)
- ret = plat->handle_irq(irq, dev, armpmu->handle_irq);
+ ret = plat->handle_irq(irq, armpmu, armpmu->handle_irq);
else
- ret = armpmu->handle_irq(irq, dev);
+ ret = armpmu->handle_irq(irq, armpmu);
finish_clock = sched_clock();
perf_sample_event_took(finish_clock - start_clock);
static void armpmu_enable(struct pmu *pmu)
{
struct arm_pmu *armpmu = to_arm_pmu(pmu);
- struct pmu_hw_events *hw_events = armpmu->get_hw_events();
+ struct pmu_hw_events *hw_events = this_cpu_ptr(armpmu->hw_events);
int enabled = bitmap_weight(hw_events->used_mask, armpmu->num_events);
if (enabled)
return perf_pmu_register(&armpmu->pmu, armpmu->name, type);
}
-/*
- * Callchain handling code.
- */
-
-/*
- * The registers we're interested in are at the end of the variable
- * length saved register structure. The fp points at the end of this
- * structure so the address of this struct is:
- * (struct frame_tail *)(xxx->fp)-1
- *
- * This code has been adapted from the ARM OProfile support.
- */
-struct frame_tail {
- struct frame_tail __user *fp;
- unsigned long sp;
- unsigned long lr;
-} __attribute__((packed));
-
-/*
- * Get the return address for a single stackframe and return a pointer to the
- * next frame tail.
- */
-static struct frame_tail __user *
-user_backtrace(struct frame_tail __user *tail,
- struct perf_callchain_entry *entry)
-{
- struct frame_tail buftail;
- unsigned long err;
-
- if (!access_ok(VERIFY_READ, tail, sizeof(buftail)))
- return NULL;
-
- pagefault_disable();
- err = __copy_from_user_inatomic(&buftail, tail, sizeof(buftail));
- pagefault_enable();
-
- if (err)
- return NULL;
-
- perf_callchain_store(entry, buftail.lr);
-
- /*
- * Frame pointers should strictly progress back up the stack
- * (towards higher addresses).
- */
- if (tail + 1 >= buftail.fp)
- return NULL;
-
- return buftail.fp - 1;
-}
-
-void
-perf_callchain_user(struct perf_callchain_entry *entry, struct pt_regs *regs)
-{
- struct frame_tail __user *tail;
-
- if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
- /* We don't support guest os callchain now */
- return;
- }
-
- perf_callchain_store(entry, regs->ARM_pc);
-
- if (!current->mm)
- return;
-
- tail = (struct frame_tail __user *)regs->ARM_fp - 1;
-
- while ((entry->nr < PERF_MAX_STACK_DEPTH) &&
- tail && !((unsigned long)tail & 0x3))
- tail = user_backtrace(tail, entry);
-}
-
-/*
- * Gets called by walk_stackframe() for every stackframe. This will be called
- * whist unwinding the stackframe and is like a subroutine return so we use
- * the PC.
- */
-static int
-callchain_trace(struct stackframe *fr,
- void *data)
-{
- struct perf_callchain_entry *entry = data;
- perf_callchain_store(entry, fr->pc);
- return 0;
-}
-
-void
-perf_callchain_kernel(struct perf_callchain_entry *entry, struct pt_regs *regs)
-{
- struct stackframe fr;
-
- if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
- /* We don't support guest os callchain now */
- return;
- }
-
- arm_get_current_stackframe(regs, &fr);
- walk_stackframe(&fr, callchain_trace, entry);
-}
-
-unsigned long perf_instruction_pointer(struct pt_regs *regs)
-{
- if (perf_guest_cbs && perf_guest_cbs->is_in_guest())
- return perf_guest_cbs->get_guest_ip();
-
- return instruction_pointer(regs);
-}
-
-unsigned long perf_misc_flags(struct pt_regs *regs)
-{
- int misc = 0;
-
- if (perf_guest_cbs && perf_guest_cbs->is_in_guest()) {
- if (perf_guest_cbs->is_user_mode())
- misc |= PERF_RECORD_MISC_GUEST_USER;
- else
- misc |= PERF_RECORD_MISC_GUEST_KERNEL;
- } else {
- if (user_mode(regs))
- misc |= PERF_RECORD_MISC_USER;
- else
- misc |= PERF_RECORD_MISC_KERNEL;
- }
-
- return misc;
-}
/* Set at runtime when we know what CPU type we are. */
static struct arm_pmu *cpu_pmu;
-static DEFINE_PER_CPU(struct arm_pmu *, percpu_pmu);
-static DEFINE_PER_CPU(struct perf_event * [ARMPMU_MAX_HWEVENTS], hw_events);
-static DEFINE_PER_CPU(unsigned long [BITS_TO_LONGS(ARMPMU_MAX_HWEVENTS)], used_mask);
-static DEFINE_PER_CPU(struct pmu_hw_events, cpu_hw_events);
-
/*
* Despite the names, these two functions are CPU-specific and are used
* by the OProfile/perf code.
#include "perf_event_v6.c"
#include "perf_event_v7.c"
-static struct pmu_hw_events *cpu_pmu_get_cpu_events(void)
-{
- return this_cpu_ptr(&cpu_hw_events);
-}
-
static void cpu_pmu_enable_percpu_irq(void *data)
{
int irq = *(int *)data;
{
int i, irq, irqs;
struct platform_device *pmu_device = cpu_pmu->plat_device;
+ struct pmu_hw_events __percpu *hw_events = cpu_pmu->hw_events;
irqs = min(pmu_device->num_resources, num_possible_cpus());
irq = platform_get_irq(pmu_device, 0);
if (irq >= 0 && irq_is_percpu(irq)) {
on_each_cpu(cpu_pmu_disable_percpu_irq, &irq, 1);
- free_percpu_irq(irq, &percpu_pmu);
+ free_percpu_irq(irq, &hw_events->percpu_pmu);
} else {
for (i = 0; i < irqs; ++i) {
if (!cpumask_test_and_clear_cpu(i, &cpu_pmu->active_irqs))
continue;
irq = platform_get_irq(pmu_device, i);
if (irq >= 0)
- free_irq(irq, cpu_pmu);
+ free_irq(irq, per_cpu_ptr(&hw_events->percpu_pmu, i));
}
}
}
{
int i, err, irq, irqs;
struct platform_device *pmu_device = cpu_pmu->plat_device;
+ struct pmu_hw_events __percpu *hw_events = cpu_pmu->hw_events;
if (!pmu_device)
return -ENODEV;
irqs = min(pmu_device->num_resources, num_possible_cpus());
if (irqs < 1) {
- printk_once("perf/ARM: No irqs for PMU defined, sampling events not supported\n");
+ pr_warn_once("perf/ARM: No irqs for PMU defined, sampling events not supported\n");
return 0;
}
irq = platform_get_irq(pmu_device, 0);
if (irq >= 0 && irq_is_percpu(irq)) {
- err = request_percpu_irq(irq, handler, "arm-pmu", &percpu_pmu);
+ err = request_percpu_irq(irq, handler, "arm-pmu",
+ &hw_events->percpu_pmu);
if (err) {
pr_err("unable to request IRQ%d for ARM PMU counters\n",
irq);
err = request_irq(irq, handler,
IRQF_NOBALANCING | IRQF_NO_THREAD, "arm-pmu",
- cpu_pmu);
+ per_cpu_ptr(&hw_events->percpu_pmu, i));
if (err) {
pr_err("unable to request IRQ%d for ARM PMU counters\n",
irq);
return 0;
}
-static void cpu_pmu_init(struct arm_pmu *cpu_pmu)
+/*
+ * PMU hardware loses all context when a CPU goes offline.
+ * When a CPU is hotplugged back in, since some hardware registers are
+ * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
+ * junk values out of them.
+ */
+static int cpu_pmu_notify(struct notifier_block *b, unsigned long action,
+ void *hcpu)
+{
+ struct arm_pmu *pmu = container_of(b, struct arm_pmu, hotplug_nb);
+
+ if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
+ return NOTIFY_DONE;
+
+ if (pmu->reset)
+ pmu->reset(pmu);
+ else
+ return NOTIFY_DONE;
+
+ return NOTIFY_OK;
+}
+
+static int cpu_pmu_init(struct arm_pmu *cpu_pmu)
{
+ int err;
int cpu;
+ struct pmu_hw_events __percpu *cpu_hw_events;
+
+ cpu_hw_events = alloc_percpu(struct pmu_hw_events);
+ if (!cpu_hw_events)
+ return -ENOMEM;
+
+ cpu_pmu->hotplug_nb.notifier_call = cpu_pmu_notify;
+ err = register_cpu_notifier(&cpu_pmu->hotplug_nb);
+ if (err)
+ goto out_hw_events;
+
for_each_possible_cpu(cpu) {
- struct pmu_hw_events *events = &per_cpu(cpu_hw_events, cpu);
- events->events = per_cpu(hw_events, cpu);
- events->used_mask = per_cpu(used_mask, cpu);
+ struct pmu_hw_events *events = per_cpu_ptr(cpu_hw_events, cpu);
raw_spin_lock_init(&events->pmu_lock);
- per_cpu(percpu_pmu, cpu) = cpu_pmu;
+ events->percpu_pmu = cpu_pmu;
}
- cpu_pmu->get_hw_events = cpu_pmu_get_cpu_events;
+ cpu_pmu->hw_events = cpu_hw_events;
cpu_pmu->request_irq = cpu_pmu_request_irq;
cpu_pmu->free_irq = cpu_pmu_free_irq;
/* If no interrupts available, set the corresponding capability flag */
if (!platform_get_irq(cpu_pmu->plat_device, 0))
cpu_pmu->pmu.capabilities |= PERF_PMU_CAP_NO_INTERRUPT;
-}
-
-/*
- * PMU hardware loses all context when a CPU goes offline.
- * When a CPU is hotplugged back in, since some hardware registers are
- * UNKNOWN at reset, the PMU must be explicitly reset to avoid reading
- * junk values out of them.
- */
-static int cpu_pmu_notify(struct notifier_block *b, unsigned long action,
- void *hcpu)
-{
- if ((action & ~CPU_TASKS_FROZEN) != CPU_STARTING)
- return NOTIFY_DONE;
- if (cpu_pmu && cpu_pmu->reset)
- cpu_pmu->reset(cpu_pmu);
- else
- return NOTIFY_DONE;
+ return 0;
- return NOTIFY_OK;
+out_hw_events:
+ free_percpu(cpu_hw_events);
+ return err;
}
-static struct notifier_block cpu_pmu_hotplug_notifier = {
- .notifier_call = cpu_pmu_notify,
-};
+static void cpu_pmu_destroy(struct arm_pmu *cpu_pmu)
+{
+ unregister_cpu_notifier(&cpu_pmu->hotplug_nb);
+ free_percpu(cpu_pmu->hw_events);
+}
/*
* PMU platform driver and devicetree bindings.
{},
};
+static const struct pmu_probe_info pmu_probe_table[] = {
+ ARM_PMU_PROBE(ARM_CPU_PART_ARM1136, armv6_1136_pmu_init),
+ ARM_PMU_PROBE(ARM_CPU_PART_ARM1156, armv6_1156_pmu_init),
+ ARM_PMU_PROBE(ARM_CPU_PART_ARM1176, armv6_1176_pmu_init),
+ ARM_PMU_PROBE(ARM_CPU_PART_ARM11MPCORE, armv6mpcore_pmu_init),
+ ARM_PMU_PROBE(ARM_CPU_PART_CORTEX_A8, armv7_a8_pmu_init),
+ ARM_PMU_PROBE(ARM_CPU_PART_CORTEX_A9, armv7_a9_pmu_init),
+ XSCALE_PMU_PROBE(ARM_CPU_XSCALE_ARCH_V1, xscale1pmu_init),
+ XSCALE_PMU_PROBE(ARM_CPU_XSCALE_ARCH_V2, xscale2pmu_init),
+ { /* sentinel value */ }
+};
+
/*
* CPU PMU identification and probing.
*/
static int probe_current_pmu(struct arm_pmu *pmu)
{
int cpu = get_cpu();
+ unsigned int cpuid = read_cpuid_id();
int ret = -ENODEV;
+ const struct pmu_probe_info *info;
pr_info("probing PMU on CPU %d\n", cpu);
- switch (read_cpuid_part()) {
- /* ARM Ltd CPUs. */
- case ARM_CPU_PART_ARM1136:
- ret = armv6_1136_pmu_init(pmu);
- break;
- case ARM_CPU_PART_ARM1156:
- ret = armv6_1156_pmu_init(pmu);
- break;
- case ARM_CPU_PART_ARM1176:
- ret = armv6_1176_pmu_init(pmu);
- break;
- case ARM_CPU_PART_ARM11MPCORE:
- ret = armv6mpcore_pmu_init(pmu);
- break;
- case ARM_CPU_PART_CORTEX_A8:
- ret = armv7_a8_pmu_init(pmu);
- break;
- case ARM_CPU_PART_CORTEX_A9:
- ret = armv7_a9_pmu_init(pmu);
- break;
-
- default:
- if (read_cpuid_implementor() == ARM_CPU_IMP_INTEL) {
- switch (xscale_cpu_arch_version()) {
- case ARM_CPU_XSCALE_ARCH_V1:
- ret = xscale1pmu_init(pmu);
- break;
- case ARM_CPU_XSCALE_ARCH_V2:
- ret = xscale2pmu_init(pmu);
- break;
- }
- }
+ for (info = pmu_probe_table; info->init != NULL; info++) {
+ if ((cpuid & info->mask) != info->cpuid)
+ continue;
+ ret = info->init(pmu);
break;
}
int ret = -ENODEV;
if (cpu_pmu) {
- pr_info("attempt to register multiple PMU devices!");
+ pr_info("attempt to register multiple PMU devices!\n");
return -ENOSPC;
}
pmu = kzalloc(sizeof(struct arm_pmu), GFP_KERNEL);
if (!pmu) {
- pr_info("failed to allocate PMU device!");
+ pr_info("failed to allocate PMU device!\n");
return -ENOMEM;
}
}
if (ret) {
- pr_info("failed to probe PMU!");
+ pr_info("failed to probe PMU!\n");
goto out_free;
}
- cpu_pmu_init(cpu_pmu);
- ret = armpmu_register(cpu_pmu, PERF_TYPE_RAW);
+ ret = cpu_pmu_init(cpu_pmu);
+ if (ret)
+ goto out_free;
- if (!ret)
- return 0;
+ ret = armpmu_register(cpu_pmu, -1);
+ if (ret)
+ goto out_destroy;
+ return 0;
+
+out_destroy:
+ cpu_pmu_destroy(cpu_pmu);
out_free:
- pr_info("failed to register PMU devices!");
+ pr_info("failed to register PMU devices!\n");
kfree(pmu);
return ret;
}
static int __init register_pmu_driver(void)
{
- int err;
-
- err = register_cpu_notifier(&cpu_pmu_hotplug_notifier);
- if (err)
- return err;
-
- err = platform_driver_register(&cpu_pmu_driver);
- if (err)
- unregister_cpu_notifier(&cpu_pmu_hotplug_notifier);
-
- return err;
+ return platform_driver_register(&cpu_pmu_driver);
}
device_initcall(register_pmu_driver);
unsigned long val, mask, evt, flags;
struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
- struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+ struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
int idx = hwc->idx;
if (ARMV6_CYCLE_COUNTER == idx) {
unsigned long pmcr = armv6_pmcr_read();
struct perf_sample_data data;
struct arm_pmu *cpu_pmu = (struct arm_pmu *)dev;
- struct pmu_hw_events *cpuc = cpu_pmu->get_hw_events();
+ struct pmu_hw_events *cpuc = this_cpu_ptr(cpu_pmu->hw_events);
struct pt_regs *regs;
int idx;
static void armv6pmu_start(struct arm_pmu *cpu_pmu)
{
unsigned long flags, val;
- struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+ struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = armv6_pmcr_read();
static void armv6pmu_stop(struct arm_pmu *cpu_pmu)
{
unsigned long flags, val;
- struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+ struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = armv6_pmcr_read();
unsigned long val, mask, evt, flags;
struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
- struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+ struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
int idx = hwc->idx;
if (ARMV6_CYCLE_COUNTER == idx) {
unsigned long val, mask, flags, evt = 0;
struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
- struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+ struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
int idx = hwc->idx;
if (ARMV6_CYCLE_COUNTER == idx) {
return pmnc & BIT(ARMV7_IDX_TO_COUNTER(idx));
}
-static inline int armv7_pmnc_select_counter(int idx)
+static inline void armv7_pmnc_select_counter(int idx)
{
u32 counter = ARMV7_IDX_TO_COUNTER(idx);
asm volatile("mcr p15, 0, %0, c9, c12, 5" : : "r" (counter));
isb();
-
- return idx;
}
static inline u32 armv7pmu_read_counter(struct perf_event *event)
int idx = hwc->idx;
u32 value = 0;
- if (!armv7_pmnc_counter_valid(cpu_pmu, idx))
+ if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) {
pr_err("CPU%u reading wrong counter %d\n",
smp_processor_id(), idx);
- else if (idx == ARMV7_IDX_CYCLE_COUNTER)
+ } else if (idx == ARMV7_IDX_CYCLE_COUNTER) {
asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (value));
- else if (armv7_pmnc_select_counter(idx) == idx)
+ } else {
+ armv7_pmnc_select_counter(idx);
asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (value));
+ }
return value;
}
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
- if (!armv7_pmnc_counter_valid(cpu_pmu, idx))
+ if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) {
pr_err("CPU%u writing wrong counter %d\n",
smp_processor_id(), idx);
- else if (idx == ARMV7_IDX_CYCLE_COUNTER)
+ } else if (idx == ARMV7_IDX_CYCLE_COUNTER) {
asm volatile("mcr p15, 0, %0, c9, c13, 0" : : "r" (value));
- else if (armv7_pmnc_select_counter(idx) == idx)
+ } else {
+ armv7_pmnc_select_counter(idx);
asm volatile("mcr p15, 0, %0, c9, c13, 2" : : "r" (value));
+ }
}
static inline void armv7_pmnc_write_evtsel(int idx, u32 val)
{
- if (armv7_pmnc_select_counter(idx) == idx) {
- val &= ARMV7_EVTYPE_MASK;
- asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
- }
+ armv7_pmnc_select_counter(idx);
+ val &= ARMV7_EVTYPE_MASK;
+ asm volatile("mcr p15, 0, %0, c9, c13, 1" : : "r" (val));
}
-static inline int armv7_pmnc_enable_counter(int idx)
+static inline void armv7_pmnc_enable_counter(int idx)
{
u32 counter = ARMV7_IDX_TO_COUNTER(idx);
asm volatile("mcr p15, 0, %0, c9, c12, 1" : : "r" (BIT(counter)));
- return idx;
}
-static inline int armv7_pmnc_disable_counter(int idx)
+static inline void armv7_pmnc_disable_counter(int idx)
{
u32 counter = ARMV7_IDX_TO_COUNTER(idx);
asm volatile("mcr p15, 0, %0, c9, c12, 2" : : "r" (BIT(counter)));
- return idx;
}
-static inline int armv7_pmnc_enable_intens(int idx)
+static inline void armv7_pmnc_enable_intens(int idx)
{
u32 counter = ARMV7_IDX_TO_COUNTER(idx);
asm volatile("mcr p15, 0, %0, c9, c14, 1" : : "r" (BIT(counter)));
- return idx;
}
-static inline int armv7_pmnc_disable_intens(int idx)
+static inline void armv7_pmnc_disable_intens(int idx)
{
u32 counter = ARMV7_IDX_TO_COUNTER(idx);
asm volatile("mcr p15, 0, %0, c9, c14, 2" : : "r" (BIT(counter)));
/* Clear the overflow flag in case an interrupt is pending. */
asm volatile("mcr p15, 0, %0, c9, c12, 3" : : "r" (BIT(counter)));
isb();
-
- return idx;
}
static inline u32 armv7_pmnc_getreset_flags(void)
u32 val;
unsigned int cnt;
- printk(KERN_INFO "PMNC registers dump:\n");
+ pr_info("PMNC registers dump:\n");
asm volatile("mrc p15, 0, %0, c9, c12, 0" : "=r" (val));
- printk(KERN_INFO "PMNC =0x%08x\n", val);
+ pr_info("PMNC =0x%08x\n", val);
asm volatile("mrc p15, 0, %0, c9, c12, 1" : "=r" (val));
- printk(KERN_INFO "CNTENS=0x%08x\n", val);
+ pr_info("CNTENS=0x%08x\n", val);
asm volatile("mrc p15, 0, %0, c9, c14, 1" : "=r" (val));
- printk(KERN_INFO "INTENS=0x%08x\n", val);
+ pr_info("INTENS=0x%08x\n", val);
asm volatile("mrc p15, 0, %0, c9, c12, 3" : "=r" (val));
- printk(KERN_INFO "FLAGS =0x%08x\n", val);
+ pr_info("FLAGS =0x%08x\n", val);
asm volatile("mrc p15, 0, %0, c9, c12, 5" : "=r" (val));
- printk(KERN_INFO "SELECT=0x%08x\n", val);
+ pr_info("SELECT=0x%08x\n", val);
asm volatile("mrc p15, 0, %0, c9, c13, 0" : "=r" (val));
- printk(KERN_INFO "CCNT =0x%08x\n", val);
+ pr_info("CCNT =0x%08x\n", val);
for (cnt = ARMV7_IDX_COUNTER0;
cnt <= ARMV7_IDX_COUNTER_LAST(cpu_pmu); cnt++) {
armv7_pmnc_select_counter(cnt);
asm volatile("mrc p15, 0, %0, c9, c13, 2" : "=r" (val));
- printk(KERN_INFO "CNT[%d] count =0x%08x\n",
+ pr_info("CNT[%d] count =0x%08x\n",
ARMV7_IDX_TO_COUNTER(cnt), val);
asm volatile("mrc p15, 0, %0, c9, c13, 1" : "=r" (val));
- printk(KERN_INFO "CNT[%d] evtsel=0x%08x\n",
+ pr_info("CNT[%d] evtsel=0x%08x\n",
ARMV7_IDX_TO_COUNTER(cnt), val);
}
}
unsigned long flags;
struct hw_perf_event *hwc = &event->hw;
struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
- struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+ struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
int idx = hwc->idx;
if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) {
unsigned long flags;
struct hw_perf_event *hwc = &event->hw;
struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
- struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+ struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
int idx = hwc->idx;
if (!armv7_pmnc_counter_valid(cpu_pmu, idx)) {
u32 pmnc;
struct perf_sample_data data;
struct arm_pmu *cpu_pmu = (struct arm_pmu *)dev;
- struct pmu_hw_events *cpuc = cpu_pmu->get_hw_events();
+ struct pmu_hw_events *cpuc = this_cpu_ptr(cpu_pmu->hw_events);
struct pt_regs *regs;
int idx;
static void armv7pmu_start(struct arm_pmu *cpu_pmu)
{
unsigned long flags;
- struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+ struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
raw_spin_lock_irqsave(&events->pmu_lock, flags);
/* Enable all counters */
static void armv7pmu_stop(struct arm_pmu *cpu_pmu)
{
unsigned long flags;
- struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+ struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
raw_spin_lock_irqsave(&events->pmu_lock, flags);
/* Disable all counters */
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
- struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+ struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
/* Disable counter and interrupt */
raw_spin_lock_irqsave(&events->pmu_lock, flags);
struct hw_perf_event *hwc = &event->hw;
int idx = hwc->idx;
struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
- struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+ struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
/*
* Enable counter and interrupt, and set the counter to count
unsigned long pmnc;
struct perf_sample_data data;
struct arm_pmu *cpu_pmu = (struct arm_pmu *)dev;
- struct pmu_hw_events *cpuc = cpu_pmu->get_hw_events();
+ struct pmu_hw_events *cpuc = this_cpu_ptr(cpu_pmu->hw_events);
struct pt_regs *regs;
int idx;
unsigned long val, mask, evt, flags;
struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
- struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+ struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
int idx = hwc->idx;
switch (idx) {
unsigned long val, mask, evt, flags;
struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
- struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+ struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
int idx = hwc->idx;
switch (idx) {
static void xscale1pmu_start(struct arm_pmu *cpu_pmu)
{
unsigned long flags, val;
- struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+ struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale1pmu_read_pmnc();
static void xscale1pmu_stop(struct arm_pmu *cpu_pmu)
{
unsigned long flags, val;
- struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+ struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale1pmu_read_pmnc();
unsigned long pmnc, of_flags;
struct perf_sample_data data;
struct arm_pmu *cpu_pmu = (struct arm_pmu *)dev;
- struct pmu_hw_events *cpuc = cpu_pmu->get_hw_events();
+ struct pmu_hw_events *cpuc = this_cpu_ptr(cpu_pmu->hw_events);
struct pt_regs *regs;
int idx;
unsigned long flags, ien, evtsel;
struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
- struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+ struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
int idx = hwc->idx;
ien = xscale2pmu_read_int_enable();
unsigned long flags, ien, evtsel, of_flags;
struct arm_pmu *cpu_pmu = to_arm_pmu(event->pmu);
struct hw_perf_event *hwc = &event->hw;
- struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+ struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
int idx = hwc->idx;
ien = xscale2pmu_read_int_enable();
static void xscale2pmu_start(struct arm_pmu *cpu_pmu)
{
unsigned long flags, val;
- struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+ struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale2pmu_read_pmnc() & ~XSCALE_PMU_CNT64;
static void xscale2pmu_stop(struct arm_pmu *cpu_pmu)
{
unsigned long flags, val;
- struct pmu_hw_events *events = cpu_pmu->get_hw_events();
+ struct pmu_hw_events *events = this_cpu_ptr(cpu_pmu->hw_events);
raw_spin_lock_irqsave(&events->pmu_lock, flags);
val = xscale2pmu_read_pmnc();
return regs->ARM_r0;
}
-static long do_cache_op_restart(struct restart_block *);
-
static inline int
__do_cache_op(unsigned long start, unsigned long end)
{
do {
unsigned long chunk = min(PAGE_SIZE, end - start);
- if (signal_pending(current)) {
- struct thread_info *ti = current_thread_info();
-
- ti->restart_block = (struct restart_block) {
- .fn = do_cache_op_restart,
- };
-
- ti->arm_restart_block = (struct arm_restart_block) {
- {
- .cache = {
- .start = start,
- .end = end,
- },
- },
- };
-
- return -ERESTART_RESTARTBLOCK;
- }
+ if (fatal_signal_pending(current))
+ return 0;
ret = flush_cache_user_range(start, start + chunk);
if (ret)
return 0;
}
-static long do_cache_op_restart(struct restart_block *unused)
-{
- struct arm_restart_block *restart_block;
-
- restart_block = ¤t_thread_info()->arm_restart_block;
- return __do_cache_op(restart_block->cache.start,
- restart_block->cache.end);
-}
-
static inline int
do_cache_op(unsigned long start, unsigned long end, int flags)
{
pgd = pgdp + pgd_index(addr);
do {
next = kvm_pgd_addr_end(addr, end);
- unmap_puds(kvm, pgd, addr, next);
+ if (!pgd_none(*pgd))
+ unmap_puds(kvm, pgd, addr, next);
} while (pgd++, addr = next, addr != end);
}
return kvm_vcpu_dabt_iswrite(vcpu);
}
+static bool kvm_is_device_pfn(unsigned long pfn)
+{
+ return !pfn_valid(pfn);
+}
+
static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
struct kvm_memory_slot *memslot, unsigned long hva,
unsigned long fault_status)
if (is_error_pfn(pfn))
return -EFAULT;
- if (kvm_is_mmio_pfn(pfn))
+ if (kvm_is_device_pfn(pfn))
mem_type = PAGE_S2_DEVICE;
spin_lock(&kvm->mmu_lock);
--- /dev/null
+config MACH_ASM9260
+ bool "Alphascale ASM9260"
+ depends on ARCH_MULTI_V5
+ select CPU_ARM926T
+ help
+ Support for Alphascale ASM9260 based platform.
config HAVE_AT91_DBGU2
bool
-config AT91_USE_OLD_CLK
- bool
-
-config AT91_PMC_UNIT
- bool
- default !ARCH_AT91X40
-
config COMMON_CLK_AT91
bool
- default AT91_PMC_UNIT && USE_OF && !AT91_USE_OLD_CLK
select COMMON_CLK
-config OLD_CLK_AT91
- bool
- default AT91_PMC_UNIT && AT91_USE_OLD_CLK
-
-config OLD_IRQ_AT91
- bool
- select MULTI_IRQ_HANDLER
- select SPARSE_IRQ
-
config HAVE_AT91_SMD
bool
config SOC_AT91SAM9
bool
- select ATMEL_AIC_IRQ if !OLD_IRQ_AT91
+ select ATMEL_AIC_IRQ
+ select COMMON_CLK_AT91
select CPU_ARM926T
select GENERIC_CLOCKEVENTS
- select MEMORY if USE_OF
- select ATMEL_SDRAMC if USE_OF
+ select MEMORY
+ select ATMEL_SDRAMC
config SOC_SAMA5
bool
select ATMEL_AIC5_IRQ
+ select COMMON_CLK_AT91
select CPU_V7
select GENERIC_CLOCKEVENTS
- select USE_OF
select MEMORY
select ATMEL_SDRAMC
+ select PHYLIB if NETDEVICES
menu "Atmel AT91 System-on-Chip"
prompt "Core type"
-config ARCH_AT91X40
- bool "ARM7 AT91X40"
- depends on !MMU
- select CPU_ARM7TDMI
- select ARCH_USES_GETTIMEOFFSET
- select OLD_IRQ_AT91
-
- help
- Select this if you are using one of Atmel's AT91X40 SoC.
-
config SOC_SAM_V4_V5
bool "ARM9 AT91SAM9/AT91RM9200"
help
if SOC_SAM_V4_V5
config SOC_AT91RM9200
bool "AT91RM9200"
- select ATMEL_AIC_IRQ if !OLD_IRQ_AT91
+ select ATMEL_AIC_IRQ
+ select COMMON_CLK_AT91
select CPU_ARM920T
select GENERIC_CLOCKEVENTS
select HAVE_AT91_DBGU0
# ----------------------------------------------------------
endif # SOC_SAM_V4_V5
-
-if SOC_SAM_V4_V5 || ARCH_AT91X40
-source arch/arm/mach-at91/Kconfig.non_dt
-endif
-
-comment "Generic Board Type"
-
config MACH_AT91RM9200_DT
- bool "Atmel AT91RM9200 Evaluation Kits with device-tree support"
- depends on SOC_AT91RM9200
- select USE_OF
- help
- Select this if you want to experiment device-tree with
- an Atmel RM9200 Evaluation Kit.
+ def_bool SOC_AT91RM9200
config MACH_AT91SAM9_DT
- bool "Atmel AT91SAM Evaluation Kits with device-tree support"
- depends on SOC_AT91SAM9
- select USE_OF
- help
- Select this if you want to experiment device-tree with
- an Atmel Evaluation Kit.
-
-config MACH_SAMA5_DT
- bool "Atmel SAMA5 Evaluation Kits with device-tree support"
- depends on SOC_SAMA5
- select USE_OF
- select PHYLIB if NETDEVICES
- help
- Select this if you want to experiment device-tree with
- an Atmel Evaluation Kit.
+ def_bool SOC_AT91SAM9
# ----------------------------------------------------------
int "Kernel HZ (jiffies per second)"
range 32 1024
depends on ARCH_AT91
- default "128" if ARCH_AT91RM9200
+ default "128" if SOC_AT91RM9200
default "100"
help
On AT91rm9200 chips where you're using a system clock derived
+++ /dev/null
-menu "Atmel Non-DT world"
-
-config HAVE_AT91_DATAFLASH_CARD
- bool
-
-choice
- prompt "Atmel AT91 Processor Devices for non DT boards"
- depends on !ARCH_AT91X40
-
-config ARCH_AT91_NONE
- bool "None"
-
-config ARCH_AT91RM9200
- bool "AT91RM9200"
- select SOC_AT91RM9200
- select AT91_USE_OLD_CLK
- select OLD_IRQ_AT91
-
-config ARCH_AT91SAM9260
- bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20"
- select SOC_AT91SAM9260
- select AT91_USE_OLD_CLK
- select OLD_IRQ_AT91
-
-config ARCH_AT91SAM9261
- bool "AT91SAM9261 or AT91SAM9G10"
- select SOC_AT91SAM9261
- select AT91_USE_OLD_CLK
- select OLD_IRQ_AT91
-
-config ARCH_AT91SAM9263
- bool "AT91SAM9263"
- select SOC_AT91SAM9263
- select AT91_USE_OLD_CLK
- select OLD_IRQ_AT91
-
-config ARCH_AT91SAM9RL
- bool "AT91SAM9RL"
- select SOC_AT91SAM9RL
- select AT91_USE_OLD_CLK
- select OLD_IRQ_AT91
-
-config ARCH_AT91SAM9G45
- bool "AT91SAM9G45"
- select SOC_AT91SAM9G45
- select AT91_USE_OLD_CLK
- select OLD_IRQ_AT91
-
-endchoice
-
-config ARCH_AT91SAM9G20
- bool
- select ARCH_AT91SAM9260
-
-config ARCH_AT91SAM9G10
- bool
- select ARCH_AT91SAM9261
-
-# ----------------------------------------------------------
-
-if ARCH_AT91RM9200
-
-comment "AT91RM9200 Board Type"
-
-config MACH_ONEARM
- bool "Ajeco 1ARM Single Board Computer"
- help
- Select this if you are using Ajeco's 1ARM Single Board Computer.
- <http://www.ajeco.fi/>
-
-config MACH_AT91RM9200EK
- bool "Atmel AT91RM9200-EK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
-
-config MACH_CSB337
- bool "Cogent CSB337"
- help
- Select this if you are using Cogent's CSB337 board.
- <http://www.cogcomp.com/csb_csb337.htm>
-
-config MACH_CSB637
- bool "Cogent CSB637"
- help
- Select this if you are using Cogent's CSB637 board.
- <http://www.cogcomp.com/csb_csb637.htm>
-
-config MACH_CARMEVA
- bool "Conitec ARM&EVA"
- help
- Select this if you are using Conitec's AT91RM9200-MCU-Module.
- <http://www.conitec.net/english/linuxboard.php>
-
-config MACH_ATEB9200
- bool "Embest ATEB9200"
- help
- Select this if you are using Embest's ATEB9200 board.
- <http://www.embedinfo.com/english/product/ATEB9200.asp>
-
-config MACH_KB9200
- bool "KwikByte KB920x"
- help
- Select this if you are using KwikByte's KB920x board.
- <http://www.kwikbyte.com/KB9202.html>
-
-config MACH_PICOTUX2XX
- bool "picotux 200"
- help
- Select this if you are using a picotux 200.
- <http://www.picotux.com/>
-
-config MACH_KAFA
- bool "Sperry-Sun KAFA board"
- help
- Select this if you are using Sperry-Sun's KAFA board.
-
-config MACH_ECBAT91
- bool "emQbit ECB_AT91 SBC"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using emQbit's ECB_AT91 board.
- <http://wiki.emqbit.com/free-ecb-at91>
-
-config MACH_YL9200
- bool "ucDragon YL-9200"
- help
- Select this if you are using the ucDragon YL-9200 board.
-
-config MACH_CPUAT91
- bool "Eukrea CPUAT91"
- help
- Select this if you are using the Eukrea Electromatique's
- CPUAT91 board <http://www.eukrea.com/>.
-
-config MACH_ECO920
- bool "eco920"
- help
- Select this if you are using the eco920 board
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9260
-
-comment "AT91SAM9260 Variants"
-
-comment "AT91SAM9260 / AT91SAM9XE Board Type"
-
-config MACH_AT91SAM9260EK
- bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
-
-config MACH_CAM60
- bool "KwikByte KB9260 (CAM60) board"
- help
- Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
- <http://www.kwikbyte.com/KB9260.html>
-
-config MACH_SAM9_L9260
- bool "Olimex SAM9-L9260 board"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
- <http://www.olimex.com/dev/sam9-L9260.html>
-
-config MACH_AFEB9260
- bool "Custom afeb9260 board v1"
- help
- Select this if you are using custom afeb9260 board based on
- open hardware design. Select this for revision 1 of the board.
- <svn://194.85.238.22/home/users/george/svn/arm9eb>
- <http://groups.google.com/group/arm9fpga-evolution-board>
-
-config MACH_CPU9260
- bool "Eukrea CPU9260 board"
- help
- Select this if you are using a Eukrea Electromatique's
- CPU9260 Board <http://www.eukrea.com/>
-
-config MACH_FLEXIBITY
- bool "Flexibity Connect board"
- help
- Select this if you are using Flexibity Connect board
- <http://www.flexibity.com>
-
-comment "AT91SAM9G20 Board Type"
-
-config MACH_AT91SAM9G20EK
- bool "Atmel AT91SAM9G20-EK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
- that embeds only one SD/MMC slot.
-
-config MACH_AT91SAM9G20EK_2MMC
- depends on MACH_AT91SAM9G20EK
- bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
- help
- Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
- with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
- onwards.
- <http://www.atmel.com/tools/SAM9G20-EK.aspx>
-
-config MACH_CPU9G20
- bool "Eukrea CPU9G20 board"
- help
- Select this if you are using a Eukrea Electromatique's
- CPU9G20 Board <http://www.eukrea.com/>
-
-config MACH_PORTUXG20
- bool "taskit PortuxG20"
- help
- Select this if you are using taskit's PortuxG20.
- <http://www.taskit.de/en/>
-
-config MACH_STAMP9G20
- bool "taskit Stamp9G20 CPU module"
- help
- Select this if you are using taskit's Stamp9G20 CPU module on its
- evaluation board.
- <http://www.taskit.de/en/>
-
-config MACH_PCONTROL_G20
- bool "PControl G20 CPU module"
- help
- Select this if you are using taskit's Stamp9G20 CPU module on this
- carrier board, being the decentralized unit of a building automation
- system; featuring nvram, eth-switch, iso-rs485, display, io
-
-config MACH_GSIA18S
- bool "GS_IA18_S board"
- help
- This enables support for the GS_IA18_S board
- produced by GeoSIG Ltd company. This is an internet accelerograph.
- <http://www.geosig.com>
-
-config MACH_SNAPPER_9260
- bool "Bluewater Systems Snapper 9260/9G20 module"
- help
- Select this if you are using the Bluewater Systems Snapper 9260 or
- Snapper 9G20 modules.
- <http://www.bluewatersys.com/>
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9261
-
-comment "AT91SAM9261 Board Type"
-
-config MACH_AT91SAM9261EK
- bool "Atmel AT91SAM9261-EK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
-
-comment "AT91SAM9G10 Board Type"
-
-config MACH_AT91SAM9G10EK
- bool "Atmel AT91SAM9G10-EK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9263
-
-comment "AT91SAM9263 Board Type"
-
-config MACH_AT91SAM9263EK
- bool "Atmel AT91SAM9263-EK Evaluation Kit"
- select HAVE_AT91_DATAFLASH_CARD
- help
- Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
- <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9RL
-
-comment "AT91SAM9RL Board Type"
-
-config MACH_AT91SAM9RLEK
- bool "Atmel AT91SAM9RL-EK Evaluation Kit"
- help
- Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91SAM9G45
-
-comment "AT91SAM9G45 Board Type"
-
-config MACH_AT91SAM9M10G45EK
- bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
- help
- Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
- Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
- families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
- <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
-
-endif
-
-# ----------------------------------------------------------
-
-if ARCH_AT91X40
-
-comment "AT91X40 Board Type"
-
-config MACH_AT91EB01
- bool "Atmel AT91EB01 Evaluation Kit"
- help
- Select this if you are using Atmel's AT91EB01 Evaluation Kit.
- It is also a popular target for simulators such as GDB's
- ARM simulator (commonly known as the ARMulator) and the
- Skyeye simulator.
-
-endif
-
-# ----------------------------------------------------------
-
-comment "AT91 Board Options"
-
-config MTD_AT91_DATAFLASH_CARD
- bool "Enable DataFlash Card support"
- depends on HAVE_AT91_DATAFLASH_CARD
- help
- Enable support for the DataFlash card.
-
-endmenu
# Makefile for the linux kernel.
#
-obj-y := gpio.o setup.o sysirq_mask.o
+obj-y := setup.o sysirq_mask.o
-obj-$(CONFIG_OLD_IRQ_AT91) += irq.o
-obj-$(CONFIG_OLD_CLK_AT91) += clock.o
obj-$(CONFIG_SOC_AT91SAM9) += sam9_smc.o
# CPU-specific support
obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o
obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o
-obj-$(CONFIG_ARCH_AT91RM9200) += at91rm9200_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9260) += at91sam9260_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9261) += at91sam9261_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9263) += at91sam9263_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9RL) += at91sam9rl_devices.o
-obj-$(CONFIG_ARCH_AT91SAM9G45) += at91sam9g45_devices.o
-obj-$(CONFIG_ARCH_AT91X40) += at91x40.o at91x40_time.o
-
-# AT91RM9200 board-specific support
-obj-$(CONFIG_MACH_ONEARM) += board-1arm.o
-obj-$(CONFIG_MACH_AT91RM9200EK) += board-rm9200ek.o
-obj-$(CONFIG_MACH_CSB337) += board-csb337.o
-obj-$(CONFIG_MACH_CSB637) += board-csb637.o
-obj-$(CONFIG_MACH_CARMEVA) += board-carmeva.o
-obj-$(CONFIG_MACH_KB9200) += board-kb9202.o
-obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o
-obj-$(CONFIG_MACH_KAFA) += board-kafa.o
-obj-$(CONFIG_MACH_PICOTUX2XX) += board-picotux200.o
-obj-$(CONFIG_MACH_ECBAT91) += board-ecbat91.o
-obj-$(CONFIG_MACH_YL9200) += board-yl-9200.o
-obj-$(CONFIG_MACH_CPUAT91) += board-cpuat91.o
-obj-$(CONFIG_MACH_ECO920) += board-eco920.o
-
-# AT91SAM9260 board-specific support
-obj-$(CONFIG_MACH_AT91SAM9260EK) += board-sam9260ek.o
-obj-$(CONFIG_MACH_CAM60) += board-cam60.o
-obj-$(CONFIG_MACH_SAM9_L9260) += board-sam9-l9260.o
-obj-$(CONFIG_MACH_AFEB9260) += board-afeb-9260v1.o
-obj-$(CONFIG_MACH_CPU9260) += board-cpu9krea.o
-obj-$(CONFIG_MACH_FLEXIBITY) += board-flexibity.o
-
-# AT91SAM9261 board-specific support
-obj-$(CONFIG_MACH_AT91SAM9261EK) += board-sam9261ek.o
-obj-$(CONFIG_MACH_AT91SAM9G10EK) += board-sam9261ek.o
-
-# AT91SAM9263 board-specific support
-obj-$(CONFIG_MACH_AT91SAM9263EK) += board-sam9263ek.o
-
-# AT91SAM9RL board-specific support
-obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o
-
-# AT91SAM9G20 board-specific support
-obj-$(CONFIG_MACH_AT91SAM9G20EK) += board-sam9g20ek.o
-obj-$(CONFIG_MACH_CPU9G20) += board-cpu9krea.o
-obj-$(CONFIG_MACH_STAMP9G20) += board-stamp9g20.o
-obj-$(CONFIG_MACH_PORTUXG20) += board-stamp9g20.o
-obj-$(CONFIG_MACH_PCONTROL_G20) += board-pcontrol-g20.o board-stamp9g20.o
-obj-$(CONFIG_MACH_GSIA18S) += board-gsia18s.o board-stamp9g20.o
-
-# AT91SAM9260/AT91SAM9G20 board-specific support
-obj-$(CONFIG_MACH_SNAPPER_9260) += board-snapper9260.o
-
-# AT91SAM9G45 board-specific support
-obj-$(CONFIG_MACH_AT91SAM9M10G45EK) += board-sam9m10g45ek.o
-
# AT91SAM board with device-tree
obj-$(CONFIG_MACH_AT91RM9200_DT) += board-dt-rm9200.o
obj-$(CONFIG_MACH_AT91SAM9_DT) += board-dt-sam9.o
# SAMA5 board with device-tree
-obj-$(CONFIG_MACH_SAMA5_DT) += board-dt-sama5.o
-
-# AT91X40 board-specific support
-obj-$(CONFIG_MACH_AT91EB01) += board-eb01.o
-
-# Drivers
-obj-y += leds.o
+obj-$(CONFIG_SOC_SAMA5) += board-dt-sama5.o
# Power Management
obj-$(CONFIG_PM) += pm.o
# PARAMS_PHYS must be within 4MB of ZRELADDR
# INITRD_PHYS must be in RAM
-ifeq ($(CONFIG_ARCH_AT91SAM9G45),y)
- zreladdr-y += 0x70008000
-params_phys-y := 0x70000100
-initrd_phys-y := 0x70410000
-else
zreladdr-y += 0x20008000
params_phys-y := 0x20000100
initrd_phys-y := 0x20410000
-endif
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/at91_aic.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Advanced Interrupt Controller (AIC) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_AIC_H
-#define AT91_AIC_H
-
-#ifndef __ASSEMBLY__
-extern void __iomem *at91_aic_base;
-
-#define at91_aic_read(field) \
- __raw_readl(at91_aic_base + field)
-
-#define at91_aic_write(field, value) \
- __raw_writel(value, at91_aic_base + field)
-#else
-.extern at91_aic_base
-#endif
-
-/* Number of irq lines managed by AIC */
-#define NR_AIC_IRQS 32
-#define NR_AIC5_IRQS 128
-
-#define AT91_AIC5_SSR 0x0 /* Source Select Register [AIC5] */
-#define AT91_AIC5_INTSEL_MSK (0x7f << 0) /* Interrupt Line Selection Mask */
-
-#define AT91_AIC_IRQ_MIN_PRIORITY 0
-#define AT91_AIC_IRQ_MAX_PRIORITY 7
-
-#define AT91_AIC_SMR(n) ((n) * 4) /* Source Mode Registers 0-31 */
-#define AT91_AIC5_SMR 0x4 /* Source Mode Register [AIC5] */
-#define AT91_AIC_PRIOR (7 << 0) /* Priority Level */
-#define AT91_AIC_SRCTYPE (3 << 5) /* Interrupt Source Type */
-#define AT91_AIC_SRCTYPE_LOW (0 << 5)
-#define AT91_AIC_SRCTYPE_FALLING (1 << 5)
-#define AT91_AIC_SRCTYPE_HIGH (2 << 5)
-#define AT91_AIC_SRCTYPE_RISING (3 << 5)
-
-#define AT91_AIC_SVR(n) (0x80 + ((n) * 4)) /* Source Vector Registers 0-31 */
-#define AT91_AIC5_SVR 0x8 /* Source Vector Register [AIC5] */
-#define AT91_AIC_IVR 0x100 /* Interrupt Vector Register */
-#define AT91_AIC5_IVR 0x10 /* Interrupt Vector Register [AIC5] */
-#define AT91_AIC_FVR 0x104 /* Fast Interrupt Vector Register */
-#define AT91_AIC5_FVR 0x14 /* Fast Interrupt Vector Register [AIC5] */
-#define AT91_AIC_ISR 0x108 /* Interrupt Status Register */
-#define AT91_AIC5_ISR 0x18 /* Interrupt Status Register [AIC5] */
-#define AT91_AIC_IRQID (0x1f << 0) /* Current Interrupt Identifier */
-
-#define AT91_AIC_IPR 0x10c /* Interrupt Pending Register */
-#define AT91_AIC5_IPR0 0x20 /* Interrupt Pending Register 0 [AIC5] */
-#define AT91_AIC5_IPR1 0x24 /* Interrupt Pending Register 1 [AIC5] */
-#define AT91_AIC5_IPR2 0x28 /* Interrupt Pending Register 2 [AIC5] */
-#define AT91_AIC5_IPR3 0x2c /* Interrupt Pending Register 3 [AIC5] */
-#define AT91_AIC_IMR 0x110 /* Interrupt Mask Register */
-#define AT91_AIC5_IMR 0x30 /* Interrupt Mask Register [AIC5] */
-#define AT91_AIC_CISR 0x114 /* Core Interrupt Status Register */
-#define AT91_AIC5_CISR 0x34 /* Core Interrupt Status Register [AIC5] */
-#define AT91_AIC_NFIQ (1 << 0) /* nFIQ Status */
-#define AT91_AIC_NIRQ (1 << 1) /* nIRQ Status */
-
-#define AT91_AIC_IECR 0x120 /* Interrupt Enable Command Register */
-#define AT91_AIC5_IECR 0x40 /* Interrupt Enable Command Register [AIC5] */
-#define AT91_AIC_IDCR 0x124 /* Interrupt Disable Command Register */
-#define AT91_AIC5_IDCR 0x44 /* Interrupt Disable Command Register [AIC5] */
-#define AT91_AIC_ICCR 0x128 /* Interrupt Clear Command Register */
-#define AT91_AIC5_ICCR 0x48 /* Interrupt Clear Command Register [AIC5] */
-#define AT91_AIC_ISCR 0x12c /* Interrupt Set Command Register */
-#define AT91_AIC5_ISCR 0x4c /* Interrupt Set Command Register [AIC5] */
-#define AT91_AIC_EOICR 0x130 /* End of Interrupt Command Register */
-#define AT91_AIC5_EOICR 0x38 /* End of Interrupt Command Register [AIC5] */
-#define AT91_AIC_SPU 0x134 /* Spurious Interrupt Vector Register */
-#define AT91_AIC5_SPU 0x3c /* Spurious Interrupt Vector Register [AIC5] */
-#define AT91_AIC_DCR 0x138 /* Debug Control Register */
-#define AT91_AIC5_DCR 0x6c /* Debug Control Register [AIC5] */
-#define AT91_AIC_DCR_PROT (1 << 0) /* Protection Mode */
-#define AT91_AIC_DCR_GMSK (1 << 1) /* General Mask */
-
-#define AT91_AIC_FFER 0x140 /* Fast Forcing Enable Register [SAM9 only] */
-#define AT91_AIC5_FFER 0x50 /* Fast Forcing Enable Register [AIC5] */
-#define AT91_AIC_FFDR 0x144 /* Fast Forcing Disable Register [SAM9 only] */
-#define AT91_AIC5_FFDR 0x54 /* Fast Forcing Disable Register [AIC5] */
-#define AT91_AIC_FFSR 0x148 /* Fast Forcing Status Register [SAM9 only] */
-#define AT91_AIC5_FFSR 0x58 /* Fast Forcing Status Register [AIC5] */
-
-void at91_aic_handle_irq(struct pt_regs *regs);
-void at91_aic5_handle_irq(struct pt_regs *regs);
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/at91_tc.h
- *
- * Copyright (C) SAN People
- *
- * Timer/Counter Unit (TC) registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91_TC_H
-#define AT91_TC_H
-
-#define AT91_TC_BCR 0xc0 /* TC Block Control Register */
-#define AT91_TC_SYNC (1 << 0) /* Synchro Command */
-
-#define AT91_TC_BMR 0xc4 /* TC Block Mode Register */
-#define AT91_TC_TC0XC0S (3 << 0) /* External Clock Signal 0 Selection */
-#define AT91_TC_TC0XC0S_TCLK0 (0 << 0)
-#define AT91_TC_TC0XC0S_NONE (1 << 0)
-#define AT91_TC_TC0XC0S_TIOA1 (2 << 0)
-#define AT91_TC_TC0XC0S_TIOA2 (3 << 0)
-#define AT91_TC_TC1XC1S (3 << 2) /* External Clock Signal 1 Selection */
-#define AT91_TC_TC1XC1S_TCLK1 (0 << 2)
-#define AT91_TC_TC1XC1S_NONE (1 << 2)
-#define AT91_TC_TC1XC1S_TIOA0 (2 << 2)
-#define AT91_TC_TC1XC1S_TIOA2 (3 << 2)
-#define AT91_TC_TC2XC2S (3 << 4) /* External Clock Signal 2 Selection */
-#define AT91_TC_TC2XC2S_TCLK2 (0 << 4)
-#define AT91_TC_TC2XC2S_NONE (1 << 4)
-#define AT91_TC_TC2XC2S_TIOA0 (2 << 4)
-#define AT91_TC_TC2XC2S_TIOA1 (3 << 4)
-
-
-#define AT91_TC_CCR 0x00 /* Channel Control Register */
-#define AT91_TC_CLKEN (1 << 0) /* Counter Clock Enable Command */
-#define AT91_TC_CLKDIS (1 << 1) /* Counter CLock Disable Command */
-#define AT91_TC_SWTRG (1 << 2) /* Software Trigger Command */
-
-#define AT91_TC_CMR 0x04 /* Channel Mode Register */
-#define AT91_TC_TCCLKS (7 << 0) /* Capture/Waveform Mode: Clock Selection */
-#define AT91_TC_TIMER_CLOCK1 (0 << 0)
-#define AT91_TC_TIMER_CLOCK2 (1 << 0)
-#define AT91_TC_TIMER_CLOCK3 (2 << 0)
-#define AT91_TC_TIMER_CLOCK4 (3 << 0)
-#define AT91_TC_TIMER_CLOCK5 (4 << 0)
-#define AT91_TC_XC0 (5 << 0)
-#define AT91_TC_XC1 (6 << 0)
-#define AT91_TC_XC2 (7 << 0)
-#define AT91_TC_CLKI (1 << 3) /* Capture/Waveform Mode: Clock Invert */
-#define AT91_TC_BURST (3 << 4) /* Capture/Waveform Mode: Burst Signal Selection */
-#define AT91_TC_LDBSTOP (1 << 6) /* Capture Mode: Counter Clock Stopped with TB Loading */
-#define AT91_TC_LDBDIS (1 << 7) /* Capture Mode: Counter Clock Disable with RB Loading */
-#define AT91_TC_ETRGEDG (3 << 8) /* Capture Mode: External Trigger Edge Selection */
-#define AT91_TC_ABETRG (1 << 10) /* Capture Mode: TIOA or TIOB External Trigger Selection */
-#define AT91_TC_CPCTRG (1 << 14) /* Capture Mode: RC Compare Trigger Enable */
-#define AT91_TC_WAVE (1 << 15) /* Capture/Waveform mode */
-#define AT91_TC_LDRA (3 << 16) /* Capture Mode: RA Loading Selection */
-#define AT91_TC_LDRB (3 << 18) /* Capture Mode: RB Loading Selection */
-
-#define AT91_TC_CPCSTOP (1 << 6) /* Waveform Mode: Counter Clock Stopped with RC Compare */
-#define AT91_TC_CPCDIS (1 << 7) /* Waveform Mode: Counter Clock Disable with RC Compare */
-#define AT91_TC_EEVTEDG (3 << 8) /* Waveform Mode: External Event Edge Selection */
-#define AT91_TC_EEVTEDG_NONE (0 << 8)
-#define AT91_TC_EEVTEDG_RISING (1 << 8)
-#define AT91_TC_EEVTEDG_FALLING (2 << 8)
-#define AT91_TC_EEVTEDG_BOTH (3 << 8)
-#define AT91_TC_EEVT (3 << 10) /* Waveform Mode: External Event Selection */
-#define AT91_TC_EEVT_TIOB (0 << 10)
-#define AT91_TC_EEVT_XC0 (1 << 10)
-#define AT91_TC_EEVT_XC1 (2 << 10)
-#define AT91_TC_EEVT_XC2 (3 << 10)
-#define AT91_TC_ENETRG (1 << 12) /* Waveform Mode: External Event Trigger Enable */
-#define AT91_TC_WAVESEL (3 << 13) /* Waveform Mode: Waveform Selection */
-#define AT91_TC_WAVESEL_UP (0 << 13)
-#define AT91_TC_WAVESEL_UP_AUTO (2 << 13)
-#define AT91_TC_WAVESEL_UPDOWN (1 << 13)
-#define AT91_TC_WAVESEL_UPDOWN_AUTO (3 << 13)
-#define AT91_TC_ACPA (3 << 16) /* Waveform Mode: RA Compare Effect on TIOA */
-#define AT91_TC_ACPA_NONE (0 << 16)
-#define AT91_TC_ACPA_SET (1 << 16)
-#define AT91_TC_ACPA_CLEAR (2 << 16)
-#define AT91_TC_ACPA_TOGGLE (3 << 16)
-#define AT91_TC_ACPC (3 << 18) /* Waveform Mode: RC Compre Effect on TIOA */
-#define AT91_TC_ACPC_NONE (0 << 18)
-#define AT91_TC_ACPC_SET (1 << 18)
-#define AT91_TC_ACPC_CLEAR (2 << 18)
-#define AT91_TC_ACPC_TOGGLE (3 << 18)
-#define AT91_TC_AEEVT (3 << 20) /* Waveform Mode: External Event Effect on TIOA */
-#define AT91_TC_AEEVT_NONE (0 << 20)
-#define AT91_TC_AEEVT_SET (1 << 20)
-#define AT91_TC_AEEVT_CLEAR (2 << 20)
-#define AT91_TC_AEEVT_TOGGLE (3 << 20)
-#define AT91_TC_ASWTRG (3 << 22) /* Waveform Mode: Software Trigger Effect on TIOA */
-#define AT91_TC_ASWTRG_NONE (0 << 22)
-#define AT91_TC_ASWTRG_SET (1 << 22)
-#define AT91_TC_ASWTRG_CLEAR (2 << 22)
-#define AT91_TC_ASWTRG_TOGGLE (3 << 22)
-#define AT91_TC_BCPB (3 << 24) /* Waveform Mode: RB Compare Effect on TIOB */
-#define AT91_TC_BCPB_NONE (0 << 24)
-#define AT91_TC_BCPB_SET (1 << 24)
-#define AT91_TC_BCPB_CLEAR (2 << 24)
-#define AT91_TC_BCPB_TOGGLE (3 << 24)
-#define AT91_TC_BCPC (3 << 26) /* Waveform Mode: RC Compare Effect on TIOB */
-#define AT91_TC_BCPC_NONE (0 << 26)
-#define AT91_TC_BCPC_SET (1 << 26)
-#define AT91_TC_BCPC_CLEAR (2 << 26)
-#define AT91_TC_BCPC_TOGGLE (3 << 26)
-#define AT91_TC_BEEVT (3 << 28) /* Waveform Mode: External Event Effect on TIOB */
-#define AT91_TC_BEEVT_NONE (0 << 28)
-#define AT91_TC_BEEVT_SET (1 << 28)
-#define AT91_TC_BEEVT_CLEAR (2 << 28)
-#define AT91_TC_BEEVT_TOGGLE (3 << 28)
-#define AT91_TC_BSWTRG (3 << 30) /* Waveform Mode: Software Trigger Effect on TIOB */
-#define AT91_TC_BSWTRG_NONE (0 << 30)
-#define AT91_TC_BSWTRG_SET (1 << 30)
-#define AT91_TC_BSWTRG_CLEAR (2 << 30)
-#define AT91_TC_BSWTRG_TOGGLE (3 << 30)
-
-#define AT91_TC_CV 0x10 /* Counter Value */
-#define AT91_TC_RA 0x14 /* Register A */
-#define AT91_TC_RB 0x18 /* Register B */
-#define AT91_TC_RC 0x1c /* Register C */
-
-#define AT91_TC_SR 0x20 /* Status Register */
-#define AT91_TC_COVFS (1 << 0) /* Counter Overflow Status */
-#define AT91_TC_LOVRS (1 << 1) /* Load Overrun Status */
-#define AT91_TC_CPAS (1 << 2) /* RA Compare Status */
-#define AT91_TC_CPBS (1 << 3) /* RB Compare Status */
-#define AT91_TC_CPCS (1 << 4) /* RC Compare Status */
-#define AT91_TC_LDRAS (1 << 5) /* RA Loading Status */
-#define AT91_TC_LDRBS (1 << 6) /* RB Loading Status */
-#define AT91_TC_ETRGS (1 << 7) /* External Trigger Status */
-#define AT91_TC_CLKSTA (1 << 16) /* Clock Enabling Status */
-#define AT91_TC_MTIOA (1 << 17) /* TIOA Mirror */
-#define AT91_TC_MTIOB (1 << 18) /* TIOB Mirror */
-
-#define AT91_TC_IER 0x24 /* Interrupt Enable Register */
-#define AT91_TC_IDR 0x28 /* Interrupt Disable Register */
-#define AT91_TC_IMR 0x2c /* Interrupt Mask Register */
-
-#endif
*/
#include <linux/module.h>
-#include <linux/reboot.h>
#include <linux/clk/at91_pmc.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/system_misc.h>
-#include <mach/at91rm9200.h>
#include <mach/at91_st.h>
-#include <mach/cpu.h>
#include <mach/hardware.h>
-#include "at91_aic.h"
#include "soc.h"
#include "generic.h"
-#include "sam9_smc.h"
-#include "pm.h"
-
-#if defined(CONFIG_OLD_CLK_AT91)
-#include "clock.h"
-/* --------------------------------------------------------------------
- * Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk udc_clk = {
- .name = "udc_clk",
- .pmc_mask = 1 << AT91RM9200_ID_UDP,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ohci_clk = {
- .name = "ohci_clk",
- .pmc_mask = 1 << AT91RM9200_ID_UHP,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ether_clk = {
- .name = "ether_clk",
- .pmc_mask = 1 << AT91RM9200_ID_EMAC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc_clk = {
- .name = "mci_clk",
- .pmc_mask = 1 << AT91RM9200_ID_MCI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi_clk = {
- .name = "twi_clk",
- .pmc_mask = 1 << AT91RM9200_ID_TWI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
- .name = "usart0_clk",
- .pmc_mask = 1 << AT91RM9200_ID_US0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
- .name = "usart1_clk",
- .pmc_mask = 1 << AT91RM9200_ID_US1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
- .name = "usart2_clk",
- .pmc_mask = 1 << AT91RM9200_ID_US2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart3_clk = {
- .name = "usart3_clk",
- .pmc_mask = 1 << AT91RM9200_ID_US3,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi_clk = {
- .name = "spi_clk",
- .pmc_mask = 1 << AT91RM9200_ID_SPI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioA_clk = {
- .name = "pioA_clk",
- .pmc_mask = 1 << AT91RM9200_ID_PIOA,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
- .name = "pioB_clk",
- .pmc_mask = 1 << AT91RM9200_ID_PIOB,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioC_clk = {
- .name = "pioC_clk",
- .pmc_mask = 1 << AT91RM9200_ID_PIOC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioD_clk = {
- .name = "pioD_clk",
- .pmc_mask = 1 << AT91RM9200_ID_PIOD,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc0_clk = {
- .name = "ssc0_clk",
- .pmc_mask = 1 << AT91RM9200_ID_SSC0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc1_clk = {
- .name = "ssc1_clk",
- .pmc_mask = 1 << AT91RM9200_ID_SSC1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc2_clk = {
- .name = "ssc2_clk",
- .pmc_mask = 1 << AT91RM9200_ID_SSC2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc0_clk = {
- .name = "tc0_clk",
- .pmc_mask = 1 << AT91RM9200_ID_TC0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc1_clk = {
- .name = "tc1_clk",
- .pmc_mask = 1 << AT91RM9200_ID_TC1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc2_clk = {
- .name = "tc2_clk",
- .pmc_mask = 1 << AT91RM9200_ID_TC2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc3_clk = {
- .name = "tc3_clk",
- .pmc_mask = 1 << AT91RM9200_ID_TC3,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc4_clk = {
- .name = "tc4_clk",
- .pmc_mask = 1 << AT91RM9200_ID_TC4,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc5_clk = {
- .name = "tc5_clk",
- .pmc_mask = 1 << AT91RM9200_ID_TC5,
- .type = CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
- &pioA_clk,
- &pioB_clk,
- &pioC_clk,
- &pioD_clk,
- &usart0_clk,
- &usart1_clk,
- &usart2_clk,
- &usart3_clk,
- &mmc_clk,
- &udc_clk,
- &twi_clk,
- &spi_clk,
- &ssc0_clk,
- &ssc1_clk,
- &ssc2_clk,
- &tc0_clk,
- &tc1_clk,
- &tc2_clk,
- &tc3_clk,
- &tc4_clk,
- &tc5_clk,
- &ohci_clk,
- ðer_clk,
- // irq0 .. irq6
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
- CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
- CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
- CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
- CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
- CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
- CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc0_clk),
- CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk),
- CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.2", &ssc2_clk),
- CLKDEV_CON_DEV_ID("pclk", "fffd0000.ssc", &ssc0_clk),
- CLKDEV_CON_DEV_ID("pclk", "fffd4000.ssc", &ssc1_clk),
- CLKDEV_CON_DEV_ID("pclk", "fffd8000.ssc", &ssc2_clk),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91rm9200.0", &twi_clk),
- /* fake hclk clock */
- CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
- CLKDEV_CON_ID("pioA", &pioA_clk),
- CLKDEV_CON_ID("pioB", &pioB_clk),
- CLKDEV_CON_ID("pioC", &pioC_clk),
- CLKDEV_CON_ID("pioD", &pioD_clk),
- /* usart lookup table for DT entries */
- CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
- CLKDEV_CON_DEV_ID("usart", "fffc0000.serial", &usart0_clk),
- CLKDEV_CON_DEV_ID("usart", "fffc4000.serial", &usart1_clk),
- CLKDEV_CON_DEV_ID("usart", "fffc8000.serial", &usart2_clk),
- CLKDEV_CON_DEV_ID("usart", "fffcc000.serial", &usart3_clk),
- /* tc lookup table for DT entries */
- CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
- CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk),
- CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "fffa4000.timer", &tc3_clk),
- CLKDEV_CON_DEV_ID("t1_clk", "fffa4000.timer", &tc4_clk),
- CLKDEV_CON_DEV_ID("t2_clk", "fffa4000.timer", &tc5_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "fffb4000.mmc", &mmc_clk),
- CLKDEV_CON_DEV_ID("emac_clk", "fffbc000.ethernet", ðer_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffb8000.i2c", &twi_clk),
- CLKDEV_CON_DEV_ID("hclk", "300000.ohci", &ohci_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk),
-};
-
-static struct clk_lookup usart_clocks_lookups[] = {
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
-};
-
-/*
- * The four programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
- .name = "pck0",
- .pmc_mask = AT91_PMC_PCK0,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 0,
-};
-static struct clk pck1 = {
- .name = "pck1",
- .pmc_mask = AT91_PMC_PCK1,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 1,
-};
-static struct clk pck2 = {
- .name = "pck2",
- .pmc_mask = AT91_PMC_PCK2,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 2,
-};
-static struct clk pck3 = {
- .name = "pck3",
- .pmc_mask = AT91_PMC_PCK3,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 3,
-};
-
-static void __init at91rm9200_register_clocks(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
- clk_register(periph_clocks[i]);
-
- clkdev_add_table(periph_clocks_lookups,
- ARRAY_SIZE(periph_clocks_lookups));
- clkdev_add_table(usart_clocks_lookups,
- ARRAY_SIZE(usart_clocks_lookups));
-
- clk_register(&pck0);
- clk_register(&pck1);
- clk_register(&pck2);
- clk_register(&pck3);
-}
-#else
-#define at91rm9200_register_clocks NULL
-#endif
-
-/* --------------------------------------------------------------------
- * GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91rm9200_gpio[] __initdata = {
- {
- .id = AT91RM9200_ID_PIOA,
- .regbase = AT91RM9200_BASE_PIOA,
- }, {
- .id = AT91RM9200_ID_PIOB,
- .regbase = AT91RM9200_BASE_PIOB,
- }, {
- .id = AT91RM9200_ID_PIOC,
- .regbase = AT91RM9200_BASE_PIOC,
- }, {
- .id = AT91RM9200_ID_PIOD,
- .regbase = AT91RM9200_BASE_PIOD,
- }
-};
static void at91rm9200_idle(void)
{
at91_init_sram(0, AT91RM9200_SRAM_BASE, AT91RM9200_SRAM_SIZE);
}
-static void __init at91rm9200_ioremap_registers(void)
-{
- at91rm9200_ioremap_st(AT91RM9200_BASE_ST);
- at91_ioremap_ramc(0, AT91RM9200_BASE_MC, 256);
- at91_pm_set_standby(at91rm9200_standby);
-}
-
static void __init at91rm9200_initialize(void)
{
arm_pm_idle = at91rm9200_idle;
arm_pm_restart = at91rm9200_restart;
-
- /* Initialize GPIO subsystem */
- at91_gpio_init(at91rm9200_gpio,
- cpu_is_at91rm9200_bga() ? AT91RM9200_BGA : AT91RM9200_PQFP);
}
-/* --------------------------------------------------------------------
- * Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91rm9200_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller (FIQ) */
- 7, /* System Peripherals */
- 1, /* Parallel IO Controller A */
- 1, /* Parallel IO Controller B */
- 1, /* Parallel IO Controller C */
- 1, /* Parallel IO Controller D */
- 5, /* USART 0 */
- 5, /* USART 1 */
- 5, /* USART 2 */
- 5, /* USART 3 */
- 0, /* Multimedia Card Interface */
- 2, /* USB Device Port */
- 6, /* Two-Wire Interface */
- 5, /* Serial Peripheral Interface */
- 4, /* Serial Synchronous Controller 0 */
- 4, /* Serial Synchronous Controller 1 */
- 4, /* Serial Synchronous Controller 2 */
- 0, /* Timer Counter 0 */
- 0, /* Timer Counter 1 */
- 0, /* Timer Counter 2 */
- 0, /* Timer Counter 3 */
- 0, /* Timer Counter 4 */
- 0, /* Timer Counter 5 */
- 2, /* USB Host port */
- 3, /* Ethernet MAC */
- 0, /* Advanced Interrupt Controller (IRQ0) */
- 0, /* Advanced Interrupt Controller (IRQ1) */
- 0, /* Advanced Interrupt Controller (IRQ2) */
- 0, /* Advanced Interrupt Controller (IRQ3) */
- 0, /* Advanced Interrupt Controller (IRQ4) */
- 0, /* Advanced Interrupt Controller (IRQ5) */
- 0 /* Advanced Interrupt Controller (IRQ6) */
-};
-
AT91_SOC_START(at91rm9200)
.map_io = at91rm9200_map_io,
- .default_irq_priority = at91rm9200_default_irq_priority,
- .extern_irq = (1 << AT91RM9200_ID_IRQ0) | (1 << AT91RM9200_ID_IRQ1)
- | (1 << AT91RM9200_ID_IRQ2) | (1 << AT91RM9200_ID_IRQ3)
- | (1 << AT91RM9200_ID_IRQ4) | (1 << AT91RM9200_ID_IRQ5)
- | (1 << AT91RM9200_ID_IRQ6),
- .ioremap_registers = at91rm9200_ioremap_registers,
- .register_clocks = at91rm9200_register_clocks,
.init = at91rm9200_initialize,
AT91_SOC_END
+++ /dev/null
-/*
- * arch/arm/mach-at91/at91rm9200_devices.c
- *
- * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
- * Copyright (C) 2005 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/gpio/machine.h>
-#include <linux/platform_device.h>
-#include <linux/i2c-gpio.h>
-
-#include <mach/at91rm9200.h>
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-#include <mach/hardware.h>
-
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-/* --------------------------------------------------------------------
- * USB Host
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_data;
-
-static struct resource usbh_resources[] = {
- [0] = {
- .start = AT91RM9200_UHP_BASE,
- .end = AT91RM9200_UHP_BASE + SZ_1M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91RM9200_ID_UHP,
- .end = NR_IRQS_LEGACY + AT91RM9200_ID_UHP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91rm9200_usbh_device = {
- .name = "at91_ohci",
- .id = -1,
- .dev = {
- .dma_mask = &ohci_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &usbh_data,
- },
- .resource = usbh_resources,
- .num_resources = ARRAY_SIZE(usbh_resources),
-};
-
-void __init at91_add_device_usbh(struct at91_usbh_data *data)
-{
- int i;
-
- if (!data)
- return;
-
- /* Enable overcurrent notification */
- for (i = 0; i < data->ports; i++) {
- if (gpio_is_valid(data->overcurrent_pin[i]))
- at91_set_gpio_input(data->overcurrent_pin[i], 1);
- }
-
- usbh_data = *data;
- platform_device_register(&at91rm9200_usbh_device);
-}
-#else
-void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * USB Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
-static struct at91_udc_data udc_data;
-
-static struct resource udc_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_UDP,
- .end = AT91RM9200_BASE_UDP + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91RM9200_ID_UDP,
- .end = NR_IRQS_LEGACY + AT91RM9200_ID_UDP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91rm9200_udc_device = {
- .name = "at91_udc",
- .id = -1,
- .dev = {
- .platform_data = &udc_data,
- },
- .resource = udc_resources,
- .num_resources = ARRAY_SIZE(udc_resources),
-};
-
-void __init at91_add_device_udc(struct at91_udc_data *data)
-{
- if (!data)
- return;
-
- if (gpio_is_valid(data->vbus_pin)) {
- at91_set_gpio_input(data->vbus_pin, 0);
- at91_set_deglitch(data->vbus_pin, 1);
- }
- if (gpio_is_valid(data->pullup_pin))
- at91_set_gpio_output(data->pullup_pin, 0);
-
- udc_data = *data;
- platform_device_register(&at91rm9200_udc_device);
-}
-#else
-void __init at91_add_device_udc(struct at91_udc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Ethernet
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_ARM_AT91_ETHER) || defined(CONFIG_ARM_AT91_ETHER_MODULE)
-static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct macb_platform_data eth_data;
-
-static struct resource eth_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_EMAC,
- .end = AT91RM9200_BASE_EMAC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91RM9200_ID_EMAC,
- .end = NR_IRQS_LEGACY + AT91RM9200_ID_EMAC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91rm9200_eth_device = {
- .name = "at91_ether",
- .id = -1,
- .dev = {
- .dma_mask = ð_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = ð_data,
- },
- .resource = eth_resources,
- .num_resources = ARRAY_SIZE(eth_resources),
-};
-
-void __init at91_add_device_eth(struct macb_platform_data *data)
-{
- if (!data)
- return;
-
- if (gpio_is_valid(data->phy_irq_pin)) {
- at91_set_gpio_input(data->phy_irq_pin, 0);
- at91_set_deglitch(data->phy_irq_pin, 1);
- }
-
- /* Pins used for MII and RMII */
- at91_set_A_periph(AT91_PIN_PA16, 0); /* EMDIO */
- at91_set_A_periph(AT91_PIN_PA15, 0); /* EMDC */
- at91_set_A_periph(AT91_PIN_PA14, 0); /* ERXER */
- at91_set_A_periph(AT91_PIN_PA13, 0); /* ERX1 */
- at91_set_A_periph(AT91_PIN_PA12, 0); /* ERX0 */
- at91_set_A_periph(AT91_PIN_PA11, 0); /* ECRS_ECRSDV */
- at91_set_A_periph(AT91_PIN_PA10, 0); /* ETX1 */
- at91_set_A_periph(AT91_PIN_PA9, 0); /* ETX0 */
- at91_set_A_periph(AT91_PIN_PA8, 0); /* ETXEN */
- at91_set_A_periph(AT91_PIN_PA7, 0); /* ETXCK_EREFCK */
-
- if (!data->is_rmii) {
- at91_set_B_periph(AT91_PIN_PB19, 0); /* ERXCK */
- at91_set_B_periph(AT91_PIN_PB18, 0); /* ECOL */
- at91_set_B_periph(AT91_PIN_PB17, 0); /* ERXDV */
- at91_set_B_periph(AT91_PIN_PB16, 0); /* ERX3 */
- at91_set_B_periph(AT91_PIN_PB15, 0); /* ERX2 */
- at91_set_B_periph(AT91_PIN_PB14, 0); /* ETXER */
- at91_set_B_periph(AT91_PIN_PB13, 0); /* ETX3 */
- at91_set_B_periph(AT91_PIN_PB12, 0); /* ETX2 */
- }
-
- eth_data = *data;
- platform_device_register(&at91rm9200_eth_device);
-}
-#else
-void __init at91_add_device_eth(struct macb_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Compact Flash / PCMCIA
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
-static struct at91_cf_data cf_data;
-
-#define CF_BASE AT91_CHIPSELECT_4
-
-static struct resource cf_resources[] = {
- [0] = {
- .start = CF_BASE,
- /* ties up CS4, CS5 and CS6 */
- .end = CF_BASE + (0x30000000 - 1),
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
- },
-};
-
-static struct platform_device at91rm9200_cf_device = {
- .name = "at91_cf",
- .id = -1,
- .dev = {
- .platform_data = &cf_data,
- },
- .resource = cf_resources,
- .num_resources = ARRAY_SIZE(cf_resources),
-};
-
-void __init at91_add_device_cf(struct at91_cf_data *data)
-{
- unsigned int csa;
-
- if (!data)
- return;
-
- data->chipselect = 4; /* can only use EBI ChipSelect 4 */
-
- /* CF takes over CS4, CS5, CS6 */
- csa = at91_ramc_read(0, AT91_EBI_CSA);
- at91_ramc_write(0, AT91_EBI_CSA, csa | AT91_EBI_CS4A_SMC_COMPACTFLASH);
-
- /*
- * Static memory controller timing adjustments.
- * REVISIT: these timings are in terms of MCK cycles, so
- * when MCK changes (cpufreq etc) so must these values...
- */
- at91_ramc_write(0, AT91_SMC_CSR(4),
- AT91_SMC_ACSS_STD
- | AT91_SMC_DBW_16
- | AT91_SMC_BAT
- | AT91_SMC_WSEN
- | AT91_SMC_NWS_(32) /* wait states */
- | AT91_SMC_RWSETUP_(6) /* setup time */
- | AT91_SMC_RWHOLD_(4) /* hold time */
- );
-
- /* input/irq */
- if (gpio_is_valid(data->irq_pin)) {
- at91_set_gpio_input(data->irq_pin, 1);
- at91_set_deglitch(data->irq_pin, 1);
- }
- at91_set_gpio_input(data->det_pin, 1);
- at91_set_deglitch(data->det_pin, 1);
-
- /* outputs, initially off */
- if (gpio_is_valid(data->vcc_pin))
- at91_set_gpio_output(data->vcc_pin, 0);
- at91_set_gpio_output(data->rst_pin, 0);
-
- /* force poweron defaults for these pins ... */
- at91_set_A_periph(AT91_PIN_PC9, 0); /* A25/CFRNW */
- at91_set_A_periph(AT91_PIN_PC10, 0); /* NCS4/CFCS */
- at91_set_A_periph(AT91_PIN_PC11, 0); /* NCS5/CFCE1 */
- at91_set_A_periph(AT91_PIN_PC12, 0); /* NCS6/CFCE2 */
-
- /* nWAIT is _not_ a default setting */
- at91_set_A_periph(AT91_PIN_PC6, 1); /* nWAIT */
-
- cf_data = *data;
- platform_device_register(&at91rm9200_cf_device);
-}
-#else
-void __init at91_add_device_cf(struct at91_cf_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * MMC / SD
- * -------------------------------------------------------------------- */
-
-#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct mci_platform_data mmc_data;
-
-static struct resource mmc_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_MCI,
- .end = AT91RM9200_BASE_MCI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91RM9200_ID_MCI,
- .end = NR_IRQS_LEGACY + AT91RM9200_ID_MCI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91rm9200_mmc_device = {
- .name = "atmel_mci",
- .id = -1,
- .dev = {
- .dma_mask = &mmc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc_data,
- },
- .resource = mmc_resources,
- .num_resources = ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
-{
- unsigned int i;
- unsigned int slot_count = 0;
-
- if (!data)
- return;
-
- for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
-
- if (!data->slot[i].bus_width)
- continue;
-
- /* input/irq */
- if (gpio_is_valid(data->slot[i].detect_pin)) {
- at91_set_gpio_input(data->slot[i].detect_pin, 1);
- at91_set_deglitch(data->slot[i].detect_pin, 1);
- }
- if (gpio_is_valid(data->slot[i].wp_pin))
- at91_set_gpio_input(data->slot[i].wp_pin, 1);
-
- switch (i) {
- case 0: /* slot A */
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA28, 1);
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA29, 1);
- if (data->slot[i].bus_width == 4) {
- at91_set_B_periph(AT91_PIN_PB3, 1);
- at91_set_B_periph(AT91_PIN_PB4, 1);
- at91_set_B_periph(AT91_PIN_PB5, 1);
- }
- slot_count++;
- break;
- case 1: /* slot B */
- /* CMD */
- at91_set_B_periph(AT91_PIN_PA8, 1);
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_B_periph(AT91_PIN_PA9, 1);
- if (data->slot[i].bus_width == 4) {
- at91_set_B_periph(AT91_PIN_PA10, 1);
- at91_set_B_periph(AT91_PIN_PA11, 1);
- at91_set_B_periph(AT91_PIN_PA12, 1);
- }
- slot_count++;
- break;
- default:
- printk(KERN_ERR
- "AT91: SD/MMC slot %d not available\n", i);
- break;
- }
- if (slot_count) {
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA27, 0);
-
- mmc_data = *data;
- platform_device_register(&at91rm9200_mmc_device);
- }
- }
-
-}
-#else
-void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
-static struct atmel_nand_data nand_data;
-
-#define NAND_BASE AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
- {
- .start = NAND_BASE,
- .end = NAND_BASE + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at91rm9200_nand_device = {
- .name = "atmel_nand",
- .id = -1,
- .dev = {
- .platform_data = &nand_data,
- },
- .resource = nand_resources,
- .num_resources = ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct atmel_nand_data *data)
-{
- unsigned int csa;
-
- if (!data)
- return;
-
- /* enable the address range of CS3 */
- csa = at91_ramc_read(0, AT91_EBI_CSA);
- at91_ramc_write(0, AT91_EBI_CSA, csa | AT91_EBI_CS3A_SMC_SMARTMEDIA);
-
- /* set the bus interface characteristics */
- at91_ramc_write(0, AT91_SMC_CSR(3), AT91_SMC_ACSS_STD | AT91_SMC_DBW_8 | AT91_SMC_WSEN
- | AT91_SMC_NWS_(5)
- | AT91_SMC_TDF_(1)
- | AT91_SMC_RWSETUP_(0) /* tDS Data Set up Time 30 - ns */
- | AT91_SMC_RWHOLD_(1) /* tDH Data Hold Time 20 - ns */
- );
-
- /* enable pin */
- if (gpio_is_valid(data->enable_pin))
- at91_set_gpio_output(data->enable_pin, 1);
-
- /* ready/busy pin */
- if (gpio_is_valid(data->rdy_pin))
- at91_set_gpio_input(data->rdy_pin, 1);
-
- /* card detect pin */
- if (gpio_is_valid(data->det_pin))
- at91_set_gpio_input(data->det_pin, 1);
-
- at91_set_A_periph(AT91_PIN_PC1, 0); /* SMOE */
- at91_set_A_periph(AT91_PIN_PC3, 0); /* SMWE */
-
- nand_data = *data;
- platform_device_register(&at91rm9200_nand_device);
-}
-#else
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * TWI (i2c)
- * -------------------------------------------------------------------- */
-
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
- .sda_pin = AT91_PIN_PA25,
- .sda_is_open_drain = 1,
- .scl_pin = AT91_PIN_PA26,
- .scl_is_open_drain = 1,
- .udelay = 2, /* ~100 kHz */
-};
-
-static struct platform_device at91rm9200_twi_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev.platform_data = &pdata,
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- at91_set_GPIO_periph(AT91_PIN_PA25, 1); /* TWD (SDA) */
- at91_set_multi_drive(AT91_PIN_PA25, 1);
-
- at91_set_GPIO_periph(AT91_PIN_PA26, 1); /* TWCK (SCL) */
- at91_set_multi_drive(AT91_PIN_PA26, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91rm9200_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_TWI,
- .end = AT91RM9200_BASE_TWI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91RM9200_ID_TWI,
- .end = NR_IRQS_LEGACY + AT91RM9200_ID_TWI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91rm9200_twi_device = {
- .name = "i2c-at91rm9200",
- .id = 0,
- .resource = twi_resources,
- .num_resources = ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- /* pins used for TWI interface */
- at91_set_A_periph(AT91_PIN_PA25, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PA25, 1);
-
- at91_set_A_periph(AT91_PIN_PA26, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PA26, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91rm9200_twi_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-static struct resource spi_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_SPI,
- .end = AT91RM9200_BASE_SPI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91RM9200_ID_SPI,
- .end = NR_IRQS_LEGACY + AT91RM9200_ID_SPI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91rm9200_spi_device = {
- .name = "atmel_spi",
- .id = 0,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi_resources,
- .num_resources = ARRAY_SIZE(spi_resources),
-};
-
-static const unsigned spi_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
- int i;
- unsigned long cs_pin;
-
- at91_set_A_periph(AT91_PIN_PA0, 0); /* MISO */
- at91_set_A_periph(AT91_PIN_PA1, 0); /* MOSI */
- at91_set_A_periph(AT91_PIN_PA2, 0); /* SPCK */
-
- /* Enable SPI chip-selects */
- for (i = 0; i < nr_devices; i++) {
- if (devices[i].controller_data)
- cs_pin = (unsigned long) devices[i].controller_data;
- else
- cs_pin = spi_standard_cs[devices[i].chip_select];
-
- if (devices[i].chip_select == 0) /* for CS0 errata */
- at91_set_A_periph(cs_pin, 0);
- else
- at91_set_gpio_output(cs_pin, 1);
-
-
- /* pass chip-select pin to driver */
- devices[i].controller_data = (void *) cs_pin;
- }
-
- spi_register_board_info(devices, nr_devices);
- platform_device_register(&at91rm9200_spi_device);
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Timer/Counter blocks
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_ATMEL_TCLIB
-
-static struct resource tcb0_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_TCB0,
- .end = AT91RM9200_BASE_TCB0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC0,
- .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC0,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC1,
- .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC1,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC2,
- .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91rm9200_tcb0_device = {
- .name = "atmel_tcb",
- .id = 0,
- .resource = tcb0_resources,
- .num_resources = ARRAY_SIZE(tcb0_resources),
-};
-
-static struct resource tcb1_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_TCB1,
- .end = AT91RM9200_BASE_TCB1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC3,
- .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC3,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC4,
- .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC4,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = NR_IRQS_LEGACY + AT91RM9200_ID_TC5,
- .end = NR_IRQS_LEGACY + AT91RM9200_ID_TC5,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91rm9200_tcb1_device = {
- .name = "atmel_tcb",
- .id = 1,
- .resource = tcb1_resources,
- .num_resources = ARRAY_SIZE(tcb1_resources),
-};
-
-static void __init at91_add_device_tc(void)
-{
- platform_device_register(&at91rm9200_tcb0_device);
- platform_device_register(&at91rm9200_tcb1_device);
-}
-#else
-static void __init at91_add_device_tc(void) { }
-#endif
-
-
-/* --------------------------------------------------------------------
- * RTC
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
-static struct resource rtc_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_RTC,
- .end = AT91RM9200_BASE_RTC + SZ_256 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91_ID_SYS,
- .end = NR_IRQS_LEGACY + AT91_ID_SYS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91rm9200_rtc_device = {
- .name = "at91_rtc",
- .id = -1,
- .resource = rtc_resources,
- .num_resources = ARRAY_SIZE(rtc_resources),
-};
-
-static void __init at91_add_device_rtc(void)
-{
- platform_device_register(&at91rm9200_rtc_device);
-}
-#else
-static void __init at91_add_device_rtc(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Watchdog
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91RM9200_WATCHDOG) || defined(CONFIG_AT91RM9200_WATCHDOG_MODULE)
-static struct platform_device at91rm9200_wdt_device = {
- .name = "at91_wdt",
- .id = -1,
- .num_resources = 0,
-};
-
-static void __init at91_add_device_watchdog(void)
-{
- platform_device_register(&at91rm9200_wdt_device);
-}
-#else
-static void __init at91_add_device_watchdog(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * SSC -- Synchronous Serial Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
-static u64 ssc0_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc0_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_SSC0,
- .end = AT91RM9200_BASE_SSC0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91RM9200_ID_SSC0,
- .end = NR_IRQS_LEGACY + AT91RM9200_ID_SSC0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91rm9200_ssc0_device = {
- .name = "at91rm9200_ssc",
- .id = 0,
- .dev = {
- .dma_mask = &ssc0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ssc0_resources,
- .num_resources = ARRAY_SIZE(ssc0_resources),
-};
-
-static inline void configure_ssc0_pins(unsigned pins)
-{
- if (pins & ATMEL_SSC_TF)
- at91_set_A_periph(AT91_PIN_PB0, 1);
- if (pins & ATMEL_SSC_TK)
- at91_set_A_periph(AT91_PIN_PB1, 1);
- if (pins & ATMEL_SSC_TD)
- at91_set_A_periph(AT91_PIN_PB2, 1);
- if (pins & ATMEL_SSC_RD)
- at91_set_A_periph(AT91_PIN_PB3, 1);
- if (pins & ATMEL_SSC_RK)
- at91_set_A_periph(AT91_PIN_PB4, 1);
- if (pins & ATMEL_SSC_RF)
- at91_set_A_periph(AT91_PIN_PB5, 1);
-}
-
-static u64 ssc1_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc1_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_SSC1,
- .end = AT91RM9200_BASE_SSC1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91RM9200_ID_SSC1,
- .end = NR_IRQS_LEGACY + AT91RM9200_ID_SSC1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91rm9200_ssc1_device = {
- .name = "at91rm9200_ssc",
- .id = 1,
- .dev = {
- .dma_mask = &ssc1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ssc1_resources,
- .num_resources = ARRAY_SIZE(ssc1_resources),
-};
-
-static inline void configure_ssc1_pins(unsigned pins)
-{
- if (pins & ATMEL_SSC_TF)
- at91_set_A_periph(AT91_PIN_PB6, 1);
- if (pins & ATMEL_SSC_TK)
- at91_set_A_periph(AT91_PIN_PB7, 1);
- if (pins & ATMEL_SSC_TD)
- at91_set_A_periph(AT91_PIN_PB8, 1);
- if (pins & ATMEL_SSC_RD)
- at91_set_A_periph(AT91_PIN_PB9, 1);
- if (pins & ATMEL_SSC_RK)
- at91_set_A_periph(AT91_PIN_PB10, 1);
- if (pins & ATMEL_SSC_RF)
- at91_set_A_periph(AT91_PIN_PB11, 1);
-}
-
-static u64 ssc2_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc2_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_SSC2,
- .end = AT91RM9200_BASE_SSC2 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91RM9200_ID_SSC2,
- .end = NR_IRQS_LEGACY + AT91RM9200_ID_SSC2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91rm9200_ssc2_device = {
- .name = "at91rm9200_ssc",
- .id = 2,
- .dev = {
- .dma_mask = &ssc2_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ssc2_resources,
- .num_resources = ARRAY_SIZE(ssc2_resources),
-};
-
-static inline void configure_ssc2_pins(unsigned pins)
-{
- if (pins & ATMEL_SSC_TF)
- at91_set_A_periph(AT91_PIN_PB12, 1);
- if (pins & ATMEL_SSC_TK)
- at91_set_A_periph(AT91_PIN_PB13, 1);
- if (pins & ATMEL_SSC_TD)
- at91_set_A_periph(AT91_PIN_PB14, 1);
- if (pins & ATMEL_SSC_RD)
- at91_set_A_periph(AT91_PIN_PB15, 1);
- if (pins & ATMEL_SSC_RK)
- at91_set_A_periph(AT91_PIN_PB16, 1);
- if (pins & ATMEL_SSC_RF)
- at91_set_A_periph(AT91_PIN_PB17, 1);
-}
-
-/*
- * SSC controllers are accessed through library code, instead of any
- * kind of all-singing/all-dancing driver. For example one could be
- * used by a particular I2S audio codec's driver, while another one
- * on the same system might be used by a custom data capture driver.
- */
-void __init at91_add_device_ssc(unsigned id, unsigned pins)
-{
- struct platform_device *pdev;
-
- /*
- * NOTE: caller is responsible for passing information matching
- * "pins" to whatever will be using each particular controller.
- */
- switch (id) {
- case AT91RM9200_ID_SSC0:
- pdev = &at91rm9200_ssc0_device;
- configure_ssc0_pins(pins);
- break;
- case AT91RM9200_ID_SSC1:
- pdev = &at91rm9200_ssc1_device;
- configure_ssc1_pins(pins);
- break;
- case AT91RM9200_ID_SSC2:
- pdev = &at91rm9200_ssc2_device;
- configure_ssc2_pins(pins);
- break;
- default:
- return;
- }
-
- platform_device_register(pdev);
-}
-
-#else
-void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_DBGU,
- .end = AT91RM9200_BASE_DBGU + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91_ID_SYS,
- .end = NR_IRQS_LEGACY + AT91_ID_SYS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data dbgu_data = {
- .use_dma_tx = 0,
- .use_dma_rx = 0, /* DBGU not capable of receive DMA */
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91rm9200_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
- .dma_mask = &dbgu_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &dbgu_data,
- },
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PA30, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PA31, 1); /* DTXD */
-}
-
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_US0,
- .end = AT91RM9200_BASE_US0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91RM9200_ID_US0,
- .end = NR_IRQS_LEGACY + AT91RM9200_ID_US0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart0_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static struct gpiod_lookup_table uart0_gpios_table = {
- .dev_id = "atmel_usart",
- .table = {
- GPIO_LOOKUP("pioA", 21, "rts", GPIO_ACTIVE_LOW),
- { },
- },
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91rm9200_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
- .dma_mask = &uart0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart0_data,
- },
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PA17, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PA18, 0); /* RXD0 */
-
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PA20, 0); /* CTS0 */
-
- if (pins & ATMEL_UART_RTS) {
- /*
- * AT91RM9200 Errata #39 - RTS0 is not internally connected to PA21.
- * We need to drive the pin manually. The serial driver will driver
- * this to high when initializing.
- */
- gpiod_add_lookup_table(&uart0_gpios_table);
- }
-}
-
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_US1,
- .end = AT91RM9200_BASE_US1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91RM9200_ID_US1,
- .end = NR_IRQS_LEGACY + AT91RM9200_ID_US1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart1_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91rm9200_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
- .dma_mask = &uart1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart1_data,
- },
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PB20, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PB21, 0); /* RXD1 */
-
- if (pins & ATMEL_UART_RI)
- at91_set_A_periph(AT91_PIN_PB18, 0); /* RI1 */
- if (pins & ATMEL_UART_DTR)
- at91_set_A_periph(AT91_PIN_PB19, 0); /* DTR1 */
- if (pins & ATMEL_UART_DCD)
- at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD1 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PB24, 0); /* CTS1 */
- if (pins & ATMEL_UART_DSR)
- at91_set_A_periph(AT91_PIN_PB25, 0); /* DSR1 */
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS1 */
-}
-
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_US2,
- .end = AT91RM9200_BASE_US2 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91RM9200_ID_US2,
- .end = NR_IRQS_LEGACY + AT91RM9200_ID_US2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart2_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91rm9200_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
- .dma_mask = &uart2_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart2_data,
- },
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PA22, 0); /* RXD2 */
- at91_set_A_periph(AT91_PIN_PA23, 1); /* TXD2 */
-
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PA30, 0); /* CTS2 */
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PA31, 0); /* RTS2 */
-}
-
-static struct resource uart3_resources[] = {
- [0] = {
- .start = AT91RM9200_BASE_US3,
- .end = AT91RM9200_BASE_US3 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91RM9200_ID_US3,
- .end = NR_IRQS_LEGACY + AT91RM9200_ID_US3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart3_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart3_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91rm9200_uart3_device = {
- .name = "atmel_usart",
- .id = 4,
- .dev = {
- .dma_mask = &uart3_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart3_data,
- },
- .resource = uart3_resources,
- .num_resources = ARRAY_SIZE(uart3_resources),
-};
-
-static inline void configure_usart3_pins(unsigned pins)
-{
- at91_set_B_periph(AT91_PIN_PA5, 1); /* TXD3 */
- at91_set_B_periph(AT91_PIN_PA6, 0); /* RXD3 */
-
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PB1, 0); /* CTS3 */
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
- struct platform_device *pdev;
- struct atmel_uart_data *pdata;
-
- switch (id) {
- case 0: /* DBGU */
- pdev = &at91rm9200_dbgu_device;
- configure_dbgu_pins();
- break;
- case AT91RM9200_ID_US0:
- pdev = &at91rm9200_uart0_device;
- configure_usart0_pins(pins);
- break;
- case AT91RM9200_ID_US1:
- pdev = &at91rm9200_uart1_device;
- configure_usart1_pins(pins);
- break;
- case AT91RM9200_ID_US2:
- pdev = &at91rm9200_uart2_device;
- configure_usart2_pins(pins);
- break;
- case AT91RM9200_ID_US3:
- pdev = &at91rm9200_uart3_device;
- configure_usart3_pins(pins);
- break;
- default:
- return;
- }
- pdata = pdev->dev.platform_data;
- pdata->num = portnr; /* update to mapped ID */
-
- if (portnr < ATMEL_MAX_UART)
- at91_uarts[portnr] = pdev;
-}
-
-void __init at91_add_device_serial(void)
-{
- int i;
-
- for (i = 0; i < ATMEL_MAX_UART; i++) {
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-}
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-
-/* -------------------------------------------------------------------- */
-
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
- at91_add_device_rtc();
- at91_add_device_watchdog();
- at91_add_device_tc();
- return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
void __iomem *at91_st_base;
EXPORT_SYMBOL_GPL(at91_st_base);
-#ifdef CONFIG_OF
static struct of_device_id at91rm9200_st_timer_ids[] = {
{ .compatible = "atmel,at91rm9200-st" },
{ /* sentinel */ }
err:
return -EINVAL;
}
-#else
-static int __init of_at91rm9200_st_init(void)
-{
- return -EINVAL;
-}
-#endif
-
-void __init at91rm9200_ioremap_st(u32 addr)
-{
-#ifdef CONFIG_OF
- struct device_node *np;
-
- np = of_find_matching_node(NULL, at91rm9200_st_timer_ids);
- if (np) {
- of_node_put(np);
- return;
- }
-#endif
- at91_st_base = ioremap(addr, 256);
- if (!at91_st_base)
- panic("Impossible to ioremap ST\n");
-}
/*
* ST (system timer) module supports both clockevents and clocksource.
*
*/
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/clk/at91_pmc.h>
-
-#include <asm/proc-fns.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
-#include <mach/at91sam9260.h>
#include <mach/hardware.h>
-#include "at91_aic.h"
#include "soc.h"
#include "generic.h"
-#include "sam9_smc.h"
-#include "pm.h"
-
-#if defined(CONFIG_OLD_CLK_AT91)
-#include "clock.h"
-/* --------------------------------------------------------------------
- * Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioA_clk = {
- .name = "pioA_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_PIOA,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
- .name = "pioB_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_PIOB,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioC_clk = {
- .name = "pioC_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_PIOC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk adc_clk = {
- .name = "adc_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_ADC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk adc_op_clk = {
- .name = "adc_op_clk",
- .type = CLK_TYPE_PERIPHERAL,
- .rate_hz = 5000000,
-};
-
-static struct clk usart0_clk = {
- .name = "usart0_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_US0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
- .name = "usart1_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_US1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
- .name = "usart2_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_US2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc_clk = {
- .name = "mci_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_MCI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk udc_clk = {
- .name = "udc_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_UDP,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi_clk = {
- .name = "twi_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_TWI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
- .name = "spi0_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_SPI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
- .name = "spi1_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_SPI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc_clk = {
- .name = "ssc_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_SSC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc0_clk = {
- .name = "tc0_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_TC0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc1_clk = {
- .name = "tc1_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_TC1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc2_clk = {
- .name = "tc2_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_TC2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ohci_clk = {
- .name = "ohci_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_UHP,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk macb_clk = {
- .name = "pclk",
- .pmc_mask = 1 << AT91SAM9260_ID_EMAC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk isi_clk = {
- .name = "isi_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_ISI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart3_clk = {
- .name = "usart3_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_US3,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart4_clk = {
- .name = "usart4_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_US4,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart5_clk = {
- .name = "usart5_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_US5,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc3_clk = {
- .name = "tc3_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_TC3,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc4_clk = {
- .name = "tc4_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_TC4,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc5_clk = {
- .name = "tc5_clk",
- .pmc_mask = 1 << AT91SAM9260_ID_TC5,
- .type = CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
- &pioA_clk,
- &pioB_clk,
- &pioC_clk,
- &adc_clk,
- &adc_op_clk,
- &usart0_clk,
- &usart1_clk,
- &usart2_clk,
- &mmc_clk,
- &udc_clk,
- &twi_clk,
- &spi0_clk,
- &spi1_clk,
- &ssc_clk,
- &tc0_clk,
- &tc1_clk,
- &tc2_clk,
- &ohci_clk,
- &macb_clk,
- &isi_clk,
- &usart3_clk,
- &usart4_clk,
- &usart5_clk,
- &tc3_clk,
- &tc4_clk,
- &tc5_clk,
- // irq0 .. irq2
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
- /* One additional fake clock for macb_hclk */
- CLKDEV_CON_ID("hclk", &macb_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
- CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
- CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tc3_clk),
- CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.1", &tc4_clk),
- CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.1", &tc5_clk),
- CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc_clk),
- CLKDEV_CON_DEV_ID("pclk", "fffbc000.ssc", &ssc_clk),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi_clk),
- /* more usart lookup table for DT entries */
- CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
- CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
- CLKDEV_CON_DEV_ID("usart", "fffb4000.serial", &usart1_clk),
- CLKDEV_CON_DEV_ID("usart", "fffb8000.serial", &usart2_clk),
- CLKDEV_CON_DEV_ID("usart", "fffd0000.serial", &usart3_clk),
- CLKDEV_CON_DEV_ID("usart", "fffd4000.serial", &usart4_clk),
- CLKDEV_CON_DEV_ID("usart", "fffd8000.serial", &usart5_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi_clk),
- /* more tc lookup table for DT entries */
- CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
- CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk),
- CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "fffdc000.timer", &tc3_clk),
- CLKDEV_CON_DEV_ID("t1_clk", "fffdc000.timer", &tc4_clk),
- CLKDEV_CON_DEV_ID("t2_clk", "fffdc000.timer", &tc5_clk),
- CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &ohci_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "fffc8000.spi", &spi0_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "fffcc000.spi", &spi1_clk),
- /* fake hclk clock */
- CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
- CLKDEV_CON_ID("pioA", &pioA_clk),
- CLKDEV_CON_ID("pioB", &pioB_clk),
- CLKDEV_CON_ID("pioC", &pioC_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
-};
-
-static struct clk_lookup usart_clocks_lookups[] = {
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.5", &usart4_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.6", &usart5_clk),
-};
-
-/*
- * The two programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
- .name = "pck0",
- .pmc_mask = AT91_PMC_PCK0,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 0,
-};
-static struct clk pck1 = {
- .name = "pck1",
- .pmc_mask = AT91_PMC_PCK1,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 1,
-};
-
-static void __init at91sam9260_register_clocks(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
- clk_register(periph_clocks[i]);
-
- clkdev_add_table(periph_clocks_lookups,
- ARRAY_SIZE(periph_clocks_lookups));
- clkdev_add_table(usart_clocks_lookups,
- ARRAY_SIZE(usart_clocks_lookups));
-
- clk_register(&pck0);
- clk_register(&pck1);
-}
-#else
-#define at91sam9260_register_clocks NULL
-#endif
-
-/* --------------------------------------------------------------------
- * GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91sam9260_gpio[] __initdata = {
- {
- .id = AT91SAM9260_ID_PIOA,
- .regbase = AT91SAM9260_BASE_PIOA,
- }, {
- .id = AT91SAM9260_ID_PIOB,
- .regbase = AT91SAM9260_BASE_PIOB,
- }, {
- .id = AT91SAM9260_ID_PIOC,
- .regbase = AT91SAM9260_BASE_PIOC,
- }
-};
/* --------------------------------------------------------------------
* AT91SAM9260 processor initialization
at91_init_sram(0, AT91SAM9260_SRAM_BASE, AT91SAM9260_SRAM_SIZE);
}
-static void __init at91sam9260_ioremap_registers(void)
-{
- at91_ioremap_ramc(0, AT91SAM9260_BASE_SDRAMC, 512);
- at91sam926x_ioremap_pit(AT91SAM9260_BASE_PIT);
- at91sam9_ioremap_smc(0, AT91SAM9260_BASE_SMC);
- at91_ioremap_matrix(AT91SAM9260_BASE_MATRIX);
- at91_pm_set_standby(at91sam9_sdram_standby);
-}
-
static void __init at91sam9260_initialize(void)
{
arm_pm_idle = at91sam9_idle;
at91_sysirq_mask_rtt(AT91SAM9260_BASE_RTT);
-
- /* Register GPIO subsystem */
- at91_gpio_init(at91sam9260_gpio, 3);
-}
-
-static struct resource rstc_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_RSTC,
- .end = AT91SAM9260_BASE_RSTC + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9260_BASE_SDRAMC,
- .end = AT91SAM9260_BASE_SDRAMC + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device rstc_device = {
- .name = "at91-sam9260-reset",
- .resource = rstc_resources,
- .num_resources = ARRAY_SIZE(rstc_resources),
-};
-
-static struct resource shdwc_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_SHDWC,
- .end = AT91SAM9260_BASE_SHDWC + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device shdwc_device = {
- .name = "at91-poweroff",
- .resource = shdwc_resources,
- .num_resources = ARRAY_SIZE(shdwc_resources),
-};
-
-static void __init at91sam9260_register_devices(void)
-{
- platform_device_register(&rstc_device);
- platform_device_register(&shdwc_device);
-}
-
-/* --------------------------------------------------------------------
- * Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91sam9260_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller */
- 7, /* System Peripherals */
- 1, /* Parallel IO Controller A */
- 1, /* Parallel IO Controller B */
- 1, /* Parallel IO Controller C */
- 0, /* Analog-to-Digital Converter */
- 5, /* USART 0 */
- 5, /* USART 1 */
- 5, /* USART 2 */
- 0, /* Multimedia Card Interface */
- 2, /* USB Device Port */
- 6, /* Two-Wire Interface */
- 5, /* Serial Peripheral Interface 0 */
- 5, /* Serial Peripheral Interface 1 */
- 5, /* Serial Synchronous Controller */
- 0,
- 0,
- 0, /* Timer Counter 0 */
- 0, /* Timer Counter 1 */
- 0, /* Timer Counter 2 */
- 2, /* USB Host port */
- 3, /* Ethernet */
- 0, /* Image Sensor Interface */
- 5, /* USART 3 */
- 5, /* USART 4 */
- 5, /* USART 5 */
- 0, /* Timer Counter 3 */
- 0, /* Timer Counter 4 */
- 0, /* Timer Counter 5 */
- 0, /* Advanced Interrupt Controller */
- 0, /* Advanced Interrupt Controller */
- 0, /* Advanced Interrupt Controller */
-};
-
-static void __init at91sam9260_init_time(void)
-{
- at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS);
}
AT91_SOC_START(at91sam9260)
.map_io = at91sam9260_map_io,
- .default_irq_priority = at91sam9260_default_irq_priority,
- .extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1)
- | (1 << AT91SAM9260_ID_IRQ2),
- .ioremap_registers = at91sam9260_ioremap_registers,
- .register_clocks = at91sam9260_register_clocks,
- .register_devices = at91sam9260_register_devices,
.init = at91sam9260_initialize,
- .init_time = at91sam9260_init_time,
AT91_SOC_END
+++ /dev/null
-/*
- * arch/arm/mach-at91/at91sam9260_devices.c
- *
- * Copyright (C) 2006 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/i2c-gpio.h>
-
-#include <linux/platform_data/at91_adc.h>
-
-#include <mach/cpu.h>
-#include <mach/at91sam9260.h>
-#include <mach/at91sam9260_matrix.h>
-#include <mach/at91_matrix.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/hardware.h>
-
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-/* --------------------------------------------------------------------
- * USB Host
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_data;
-
-static struct resource usbh_resources[] = {
- [0] = {
- .start = AT91SAM9260_UHP_BASE,
- .end = AT91SAM9260_UHP_BASE + SZ_1M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_UHP,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_UHP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91_usbh_device = {
- .name = "at91_ohci",
- .id = -1,
- .dev = {
- .dma_mask = &ohci_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &usbh_data,
- },
- .resource = usbh_resources,
- .num_resources = ARRAY_SIZE(usbh_resources),
-};
-
-void __init at91_add_device_usbh(struct at91_usbh_data *data)
-{
- int i;
-
- if (!data)
- return;
-
- /* Enable overcurrent notification */
- for (i = 0; i < data->ports; i++) {
- if (gpio_is_valid(data->overcurrent_pin[i]))
- at91_set_gpio_input(data->overcurrent_pin[i], 1);
- }
-
- usbh_data = *data;
- platform_device_register(&at91_usbh_device);
-}
-#else
-void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * USB Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
-static struct at91_udc_data udc_data;
-
-static struct resource udc_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_UDP,
- .end = AT91SAM9260_BASE_UDP + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_UDP,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_UDP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91_udc_device = {
- .name = "at91_udc",
- .id = -1,
- .dev = {
- .platform_data = &udc_data,
- },
- .resource = udc_resources,
- .num_resources = ARRAY_SIZE(udc_resources),
-};
-
-void __init at91_add_device_udc(struct at91_udc_data *data)
-{
- if (!data)
- return;
-
- if (gpio_is_valid(data->vbus_pin)) {
- at91_set_gpio_input(data->vbus_pin, 0);
- at91_set_deglitch(data->vbus_pin, 1);
- }
-
- /* Pullup pin is handled internally by USB device peripheral */
-
- udc_data = *data;
- platform_device_register(&at91_udc_device);
-}
-#else
-void __init at91_add_device_udc(struct at91_udc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Ethernet
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct macb_platform_data eth_data;
-
-static struct resource eth_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_EMAC,
- .end = AT91SAM9260_BASE_EMAC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_EMAC,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_EMAC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9260_eth_device = {
- .name = "macb",
- .id = -1,
- .dev = {
- .dma_mask = ð_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = ð_data,
- },
- .resource = eth_resources,
- .num_resources = ARRAY_SIZE(eth_resources),
-};
-
-void __init at91_add_device_eth(struct macb_platform_data *data)
-{
- if (!data)
- return;
-
- if (gpio_is_valid(data->phy_irq_pin)) {
- at91_set_gpio_input(data->phy_irq_pin, 0);
- at91_set_deglitch(data->phy_irq_pin, 1);
- }
-
- /* Pins used for MII and RMII */
- at91_set_A_periph(AT91_PIN_PA19, 0); /* ETXCK_EREFCK */
- at91_set_A_periph(AT91_PIN_PA17, 0); /* ERXDV */
- at91_set_A_periph(AT91_PIN_PA14, 0); /* ERX0 */
- at91_set_A_periph(AT91_PIN_PA15, 0); /* ERX1 */
- at91_set_A_periph(AT91_PIN_PA18, 0); /* ERXER */
- at91_set_A_periph(AT91_PIN_PA16, 0); /* ETXEN */
- at91_set_A_periph(AT91_PIN_PA12, 0); /* ETX0 */
- at91_set_A_periph(AT91_PIN_PA13, 0); /* ETX1 */
- at91_set_A_periph(AT91_PIN_PA21, 0); /* EMDIO */
- at91_set_A_periph(AT91_PIN_PA20, 0); /* EMDC */
-
- if (!data->is_rmii) {
- at91_set_B_periph(AT91_PIN_PA28, 0); /* ECRS */
- at91_set_B_periph(AT91_PIN_PA29, 0); /* ECOL */
- at91_set_B_periph(AT91_PIN_PA25, 0); /* ERX2 */
- at91_set_B_periph(AT91_PIN_PA26, 0); /* ERX3 */
- at91_set_B_periph(AT91_PIN_PA27, 0); /* ERXCK */
- at91_set_B_periph(AT91_PIN_PA23, 0); /* ETX2 */
- at91_set_B_periph(AT91_PIN_PA24, 0); /* ETX3 */
- at91_set_B_periph(AT91_PIN_PA22, 0); /* ETXER */
- }
-
- eth_data = *data;
- platform_device_register(&at91sam9260_eth_device);
-}
-#else
-void __init at91_add_device_eth(struct macb_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * MMC / SD Slot for Atmel MCI Driver
- * -------------------------------------------------------------------- */
-
-#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct mci_platform_data mmc_data;
-
-static struct resource mmc_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_MCI,
- .end = AT91SAM9260_BASE_MCI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_MCI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9260_mmc_device = {
- .name = "atmel_mci",
- .id = -1,
- .dev = {
- .dma_mask = &mmc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc_data,
- },
- .resource = mmc_resources,
- .num_resources = ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
-{
- unsigned int i;
- unsigned int slot_count = 0;
-
- if (!data)
- return;
-
- for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
- if (data->slot[i].bus_width) {
- /* input/irq */
- if (gpio_is_valid(data->slot[i].detect_pin)) {
- at91_set_gpio_input(data->slot[i].detect_pin, 1);
- at91_set_deglitch(data->slot[i].detect_pin, 1);
- }
- if (gpio_is_valid(data->slot[i].wp_pin))
- at91_set_gpio_input(data->slot[i].wp_pin, 1);
-
- switch (i) {
- case 0:
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA7, 1);
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA6, 1);
- if (data->slot[i].bus_width == 4) {
- at91_set_A_periph(AT91_PIN_PA9, 1);
- at91_set_A_periph(AT91_PIN_PA10, 1);
- at91_set_A_periph(AT91_PIN_PA11, 1);
- }
- slot_count++;
- break;
- case 1:
- /* CMD */
- at91_set_B_periph(AT91_PIN_PA1, 1);
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_B_periph(AT91_PIN_PA0, 1);
- if (data->slot[i].bus_width == 4) {
- at91_set_B_periph(AT91_PIN_PA5, 1);
- at91_set_B_periph(AT91_PIN_PA4, 1);
- at91_set_B_periph(AT91_PIN_PA3, 1);
- }
- slot_count++;
- break;
- default:
- printk(KERN_ERR
- "AT91: SD/MMC slot %d not available\n", i);
- break;
- }
- }
- }
-
- if (slot_count) {
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA8, 0);
-
- mmc_data = *data;
- platform_device_register(&at91sam9260_mmc_device);
- }
-}
-#else
-void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
-static struct atmel_nand_data nand_data;
-
-#define NAND_BASE AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
- [0] = {
- .start = NAND_BASE,
- .end = NAND_BASE + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9260_BASE_ECC,
- .end = AT91SAM9260_BASE_ECC + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at91sam9260_nand_device = {
- .name = "atmel_nand",
- .id = -1,
- .dev = {
- .platform_data = &nand_data,
- },
- .resource = nand_resources,
- .num_resources = ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct atmel_nand_data *data)
-{
- unsigned long csa;
-
- if (!data)
- return;
-
- csa = at91_matrix_read(AT91_MATRIX_EBICSA);
- at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
-
- /* enable pin */
- if (gpio_is_valid(data->enable_pin))
- at91_set_gpio_output(data->enable_pin, 1);
-
- /* ready/busy pin */
- if (gpio_is_valid(data->rdy_pin))
- at91_set_gpio_input(data->rdy_pin, 1);
-
- /* card detect pin */
- if (gpio_is_valid(data->det_pin))
- at91_set_gpio_input(data->det_pin, 1);
-
- nand_data = *data;
- platform_device_register(&at91sam9260_nand_device);
-}
-#else
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * TWI (i2c)
- * -------------------------------------------------------------------- */
-
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
- .sda_pin = AT91_PIN_PA23,
- .sda_is_open_drain = 1,
- .scl_pin = AT91_PIN_PA24,
- .scl_is_open_drain = 1,
- .udelay = 2, /* ~100 kHz */
-};
-
-static struct platform_device at91sam9260_twi_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev.platform_data = &pdata,
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- at91_set_GPIO_periph(AT91_PIN_PA23, 1); /* TWD (SDA) */
- at91_set_multi_drive(AT91_PIN_PA23, 1);
-
- at91_set_GPIO_periph(AT91_PIN_PA24, 1); /* TWCK (SCL) */
- at91_set_multi_drive(AT91_PIN_PA24, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91sam9260_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_TWI,
- .end = AT91SAM9260_BASE_TWI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TWI,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TWI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9260_twi_device = {
- .id = 0,
- .resource = twi_resources,
- .num_resources = ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- /* IP version is not the same on 9260 and g20 */
- if (cpu_is_at91sam9g20()) {
- at91sam9260_twi_device.name = "i2c-at91sam9g20";
- } else {
- at91sam9260_twi_device.name = "i2c-at91sam9260";
- }
-
- /* pins used for TWI interface */
- at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PA23, 1);
-
- at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PA24, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91sam9260_twi_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-static struct resource spi0_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_SPI0,
- .end = AT91SAM9260_BASE_SPI0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI0,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9260_spi0_device = {
- .name = "atmel_spi",
- .id = 0,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi0_resources,
- .num_resources = ARRAY_SIZE(spi0_resources),
-};
-
-static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PC11, AT91_PIN_PC16, AT91_PIN_PC17 };
-
-static struct resource spi1_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_SPI1,
- .end = AT91SAM9260_BASE_SPI1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI1,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_SPI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9260_spi1_device = {
- .name = "atmel_spi",
- .id = 1,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi1_resources,
- .num_resources = ARRAY_SIZE(spi1_resources),
-};
-
-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PC5, AT91_PIN_PC4, AT91_PIN_PC3 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
- int i;
- unsigned long cs_pin;
- short enable_spi0 = 0;
- short enable_spi1 = 0;
-
- /* Choose SPI chip-selects */
- for (i = 0; i < nr_devices; i++) {
- if (devices[i].controller_data)
- cs_pin = (unsigned long) devices[i].controller_data;
- else if (devices[i].bus_num == 0)
- cs_pin = spi0_standard_cs[devices[i].chip_select];
- else
- cs_pin = spi1_standard_cs[devices[i].chip_select];
-
- if (!gpio_is_valid(cs_pin))
- continue;
-
- if (devices[i].bus_num == 0)
- enable_spi0 = 1;
- else
- enable_spi1 = 1;
-
- /* enable chip-select pin */
- at91_set_gpio_output(cs_pin, 1);
-
- /* pass chip-select pin to driver */
- devices[i].controller_data = (void *) cs_pin;
- }
-
- spi_register_board_info(devices, nr_devices);
-
- /* Configure SPI bus(es) */
- if (enable_spi0) {
- at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
- at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
- at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI1_SPCK */
-
- platform_device_register(&at91sam9260_spi0_device);
- }
- if (enable_spi1) {
- at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI1_MISO */
- at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI1_MOSI */
- at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI1_SPCK */
-
- platform_device_register(&at91sam9260_spi1_device);
- }
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Timer/Counter blocks
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_ATMEL_TCLIB
-
-static struct resource tcb0_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_TCB0,
- .end = AT91SAM9260_BASE_TCB0 + SZ_256 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC0,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC0,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC1,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC1,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC2,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9260_tcb0_device = {
- .name = "atmel_tcb",
- .id = 0,
- .resource = tcb0_resources,
- .num_resources = ARRAY_SIZE(tcb0_resources),
-};
-
-static struct resource tcb1_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_TCB1,
- .end = AT91SAM9260_BASE_TCB1 + SZ_256 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC3,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC3,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC4,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC4,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_TC5,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_TC5,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9260_tcb1_device = {
- .name = "atmel_tcb",
- .id = 1,
- .resource = tcb1_resources,
- .num_resources = ARRAY_SIZE(tcb1_resources),
-};
-
-static void __init at91_add_device_tc(void)
-{
- platform_device_register(&at91sam9260_tcb0_device);
- platform_device_register(&at91sam9260_tcb1_device);
-}
-#else
-static void __init at91_add_device_tc(void) { }
-#endif
-
-
-/* --------------------------------------------------------------------
- * RTT
- * -------------------------------------------------------------------- */
-
-static struct resource rtt_resources[] = {
- {
- .start = AT91SAM9260_BASE_RTT,
- .end = AT91SAM9260_BASE_RTT + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .flags = IORESOURCE_MEM,
- }, {
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9260_rtt_device = {
- .name = "at91_rtt",
- .id = 0,
- .resource = rtt_resources,
-};
-
-
-#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
-static void __init at91_add_device_rtt_rtc(void)
-{
- at91sam9260_rtt_device.name = "rtc-at91sam9";
- /*
- * The second resource is needed:
- * GPBR will serve as the storage for RTC time offset
- */
- at91sam9260_rtt_device.num_resources = 3;
- rtt_resources[1].start = AT91SAM9260_BASE_GPBR +
- 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
- rtt_resources[1].end = rtt_resources[1].start + 3;
- rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
- rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
-}
-#else
-static void __init at91_add_device_rtt_rtc(void)
-{
- /* Only one resource is needed: RTT not used as RTC */
- at91sam9260_rtt_device.num_resources = 1;
-}
-#endif
-
-static void __init at91_add_device_rtt(void)
-{
- at91_add_device_rtt_rtc();
- platform_device_register(&at91sam9260_rtt_device);
-}
-
-
-/* --------------------------------------------------------------------
- * Watchdog
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
-static struct resource wdt_resources[] = {
- {
- .start = AT91SAM9260_BASE_WDT,
- .end = AT91SAM9260_BASE_WDT + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at91sam9260_wdt_device = {
- .name = "at91_wdt",
- .id = -1,
- .resource = wdt_resources,
- .num_resources = ARRAY_SIZE(wdt_resources),
-};
-
-static void __init at91_add_device_watchdog(void)
-{
- platform_device_register(&at91sam9260_wdt_device);
-}
-#else
-static void __init at91_add_device_watchdog(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * SSC -- Synchronous Serial Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
-static u64 ssc_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_SSC,
- .end = AT91SAM9260_BASE_SSC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_SSC,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_SSC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9260_ssc_device = {
- .name = "at91rm9200_ssc",
- .id = 0,
- .dev = {
- .dma_mask = &ssc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ssc_resources,
- .num_resources = ARRAY_SIZE(ssc_resources),
-};
-
-static inline void configure_ssc_pins(unsigned pins)
-{
- if (pins & ATMEL_SSC_TF)
- at91_set_A_periph(AT91_PIN_PB17, 1);
- if (pins & ATMEL_SSC_TK)
- at91_set_A_periph(AT91_PIN_PB16, 1);
- if (pins & ATMEL_SSC_TD)
- at91_set_A_periph(AT91_PIN_PB18, 1);
- if (pins & ATMEL_SSC_RD)
- at91_set_A_periph(AT91_PIN_PB19, 1);
- if (pins & ATMEL_SSC_RK)
- at91_set_A_periph(AT91_PIN_PB20, 1);
- if (pins & ATMEL_SSC_RF)
- at91_set_A_periph(AT91_PIN_PB21, 1);
-}
-
-/*
- * SSC controllers are accessed through library code, instead of any
- * kind of all-singing/all-dancing driver. For example one could be
- * used by a particular I2S audio codec's driver, while another one
- * on the same system might be used by a custom data capture driver.
- */
-void __init at91_add_device_ssc(unsigned id, unsigned pins)
-{
- struct platform_device *pdev;
-
- /*
- * NOTE: caller is responsible for passing information matching
- * "pins" to whatever will be using each particular controller.
- */
- switch (id) {
- case AT91SAM9260_ID_SSC:
- pdev = &at91sam9260_ssc_device;
- configure_ssc_pins(pins);
- break;
- default:
- return;
- }
-
- platform_device_register(pdev);
-}
-
-#else
-void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_DBGU,
- .end = AT91SAM9260_BASE_DBGU + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91_ID_SYS,
- .end = NR_IRQS_LEGACY + AT91_ID_SYS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data dbgu_data = {
- .use_dma_tx = 0,
- .use_dma_rx = 0, /* DBGU not capable of receive DMA */
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
- .dma_mask = &dbgu_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &dbgu_data,
- },
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PB14, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PB15, 1); /* DTXD */
-}
-
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US0,
- .end = AT91SAM9260_BASE_US0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US0,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart0_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
- .dma_mask = &uart0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart0_data,
- },
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD0 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PB26, 0); /* RTS0 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PB27, 0); /* CTS0 */
- if (pins & ATMEL_UART_DTR)
- at91_set_A_periph(AT91_PIN_PB24, 0); /* DTR0 */
- if (pins & ATMEL_UART_DSR)
- at91_set_A_periph(AT91_PIN_PB22, 0); /* DSR0 */
- if (pins & ATMEL_UART_DCD)
- at91_set_A_periph(AT91_PIN_PB23, 0); /* DCD0 */
- if (pins & ATMEL_UART_RI)
- at91_set_A_periph(AT91_PIN_PB25, 0); /* RI0 */
-}
-
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US1,
- .end = AT91SAM9260_BASE_US1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US1,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart1_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
- .dma_mask = &uart1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart1_data,
- },
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD1 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PB28, 0); /* RTS1 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PB29, 0); /* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US2,
- .end = AT91SAM9260_BASE_US2 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US2,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart2_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
- .dma_mask = &uart2_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart2_data,
- },
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD2 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PA4, 0); /* RTS2 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PA5, 0); /* CTS2 */
-}
-
-static struct resource uart3_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US3,
- .end = AT91SAM9260_BASE_US3 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US3,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart3_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart3_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_uart3_device = {
- .name = "atmel_usart",
- .id = 4,
- .dev = {
- .dma_mask = &uart3_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart3_data,
- },
- .resource = uart3_resources,
- .num_resources = ARRAY_SIZE(uart3_resources),
-};
-
-static inline void configure_usart3_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PB10, 1); /* TXD3 */
- at91_set_A_periph(AT91_PIN_PB11, 0); /* RXD3 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PC8, 0); /* RTS3 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PC10, 0); /* CTS3 */
-}
-
-static struct resource uart4_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US4,
- .end = AT91SAM9260_BASE_US4 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US4,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US4,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart4_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart4_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_uart4_device = {
- .name = "atmel_usart",
- .id = 5,
- .dev = {
- .dma_mask = &uart4_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart4_data,
- },
- .resource = uart4_resources,
- .num_resources = ARRAY_SIZE(uart4_resources),
-};
-
-static inline void configure_usart4_pins(void)
-{
- at91_set_B_periph(AT91_PIN_PA31, 1); /* TXD4 */
- at91_set_B_periph(AT91_PIN_PA30, 0); /* RXD4 */
-}
-
-static struct resource uart5_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_US5,
- .end = AT91SAM9260_BASE_US5 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_US5,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_US5,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart5_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart5_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9260_uart5_device = {
- .name = "atmel_usart",
- .id = 6,
- .dev = {
- .dma_mask = &uart5_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart5_data,
- },
- .resource = uart5_resources,
- .num_resources = ARRAY_SIZE(uart5_resources),
-};
-
-static inline void configure_usart5_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PB12, 1); /* TXD5 */
- at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
- struct platform_device *pdev;
- struct atmel_uart_data *pdata;
-
- switch (id) {
- case 0: /* DBGU */
- pdev = &at91sam9260_dbgu_device;
- configure_dbgu_pins();
- break;
- case AT91SAM9260_ID_US0:
- pdev = &at91sam9260_uart0_device;
- configure_usart0_pins(pins);
- break;
- case AT91SAM9260_ID_US1:
- pdev = &at91sam9260_uart1_device;
- configure_usart1_pins(pins);
- break;
- case AT91SAM9260_ID_US2:
- pdev = &at91sam9260_uart2_device;
- configure_usart2_pins(pins);
- break;
- case AT91SAM9260_ID_US3:
- pdev = &at91sam9260_uart3_device;
- configure_usart3_pins(pins);
- break;
- case AT91SAM9260_ID_US4:
- pdev = &at91sam9260_uart4_device;
- configure_usart4_pins();
- break;
- case AT91SAM9260_ID_US5:
- pdev = &at91sam9260_uart5_device;
- configure_usart5_pins();
- break;
- default:
- return;
- }
- pdata = pdev->dev.platform_data;
- pdata->num = portnr; /* update to mapped ID */
-
- if (portnr < ATMEL_MAX_UART)
- at91_uarts[portnr] = pdev;
-}
-
-void __init at91_add_device_serial(void)
-{
- int i;
-
- for (i = 0; i < ATMEL_MAX_UART; i++) {
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-}
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-/* --------------------------------------------------------------------
- * CF/IDE
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
- defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
-
-static struct at91_cf_data cf0_data;
-
-static struct resource cf0_resources[] = {
- [0] = {
- .start = AT91_CHIPSELECT_4,
- .end = AT91_CHIPSELECT_4 + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device cf0_device = {
- .id = 0,
- .dev = {
- .platform_data = &cf0_data,
- },
- .resource = cf0_resources,
- .num_resources = ARRAY_SIZE(cf0_resources),
-};
-
-static struct at91_cf_data cf1_data;
-
-static struct resource cf1_resources[] = {
- [0] = {
- .start = AT91_CHIPSELECT_5,
- .end = AT91_CHIPSELECT_5 + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device cf1_device = {
- .id = 1,
- .dev = {
- .platform_data = &cf1_data,
- },
- .resource = cf1_resources,
- .num_resources = ARRAY_SIZE(cf1_resources),
-};
-
-void __init at91_add_device_cf(struct at91_cf_data *data)
-{
- struct platform_device *pdev;
- unsigned long csa;
-
- if (!data)
- return;
-
- csa = at91_matrix_read(AT91_MATRIX_EBICSA);
-
- switch (data->chipselect) {
- case 4:
- at91_set_multi_drive(AT91_PIN_PC8, 0);
- at91_set_A_periph(AT91_PIN_PC8, 0);
- csa |= AT91_MATRIX_CS4A_SMC_CF1;
- cf0_data = *data;
- pdev = &cf0_device;
- break;
- case 5:
- at91_set_multi_drive(AT91_PIN_PC9, 0);
- at91_set_A_periph(AT91_PIN_PC9, 0);
- csa |= AT91_MATRIX_CS5A_SMC_CF2;
- cf1_data = *data;
- pdev = &cf1_device;
- break;
- default:
- printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
- data->chipselect);
- return;
- }
-
- at91_matrix_write(AT91_MATRIX_EBICSA, csa);
-
- if (gpio_is_valid(data->rst_pin)) {
- at91_set_multi_drive(data->rst_pin, 0);
- at91_set_gpio_output(data->rst_pin, 1);
- }
-
- if (gpio_is_valid(data->irq_pin)) {
- at91_set_gpio_input(data->irq_pin, 0);
- at91_set_deglitch(data->irq_pin, 1);
- }
-
- if (gpio_is_valid(data->det_pin)) {
- at91_set_gpio_input(data->det_pin, 0);
- at91_set_deglitch(data->det_pin, 1);
- }
-
- at91_set_B_periph(AT91_PIN_PC6, 0); /* CFCE1 */
- at91_set_B_periph(AT91_PIN_PC7, 0); /* CFCE2 */
- at91_set_A_periph(AT91_PIN_PC10, 0); /* CFRNW */
- at91_set_A_periph(AT91_PIN_PC15, 1); /* NWAIT */
-
- if (IS_ENABLED(CONFIG_PATA_AT91) && (data->flags & AT91_CF_TRUE_IDE))
- pdev->name = "pata_at91";
- else
- pdev->name = "at91_cf";
-
- platform_device_register(pdev);
-}
-
-#else
-void __init at91_add_device_cf(struct at91_cf_data * data) {}
-#endif
-
-/* --------------------------------------------------------------------
- * ADCs
- * -------------------------------------------------------------------- */
-
-#if IS_ENABLED(CONFIG_AT91_ADC)
-static struct at91_adc_data adc_data;
-
-static struct resource adc_resources[] = {
- [0] = {
- .start = AT91SAM9260_BASE_ADC,
- .end = AT91SAM9260_BASE_ADC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9260_ID_ADC,
- .end = NR_IRQS_LEGACY + AT91SAM9260_ID_ADC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91_adc_device = {
- .name = "at91sam9260-adc",
- .id = -1,
- .dev = {
- .platform_data = &adc_data,
- },
- .resource = adc_resources,
- .num_resources = ARRAY_SIZE(adc_resources),
-};
-
-static struct at91_adc_trigger at91_adc_triggers[] = {
- [0] = {
- .name = "timer-counter-0",
- .value = 0x1,
- },
- [1] = {
- .name = "timer-counter-1",
- .value = 0x3,
- },
- [2] = {
- .name = "timer-counter-2",
- .value = 0x5,
- },
- [3] = {
- .name = "external",
- .value = 0xd,
- .is_external = true,
- },
-};
-
-void __init at91_add_device_adc(struct at91_adc_data *data)
-{
- if (!data)
- return;
-
- if (test_bit(0, &data->channels_used))
- at91_set_A_periph(AT91_PIN_PC0, 0);
- if (test_bit(1, &data->channels_used))
- at91_set_A_periph(AT91_PIN_PC1, 0);
- if (test_bit(2, &data->channels_used))
- at91_set_A_periph(AT91_PIN_PC2, 0);
- if (test_bit(3, &data->channels_used))
- at91_set_A_periph(AT91_PIN_PC3, 0);
-
- if (data->use_external_triggers)
- at91_set_A_periph(AT91_PIN_PA22, 0);
-
- data->startup_time = 10;
- data->trigger_number = 4;
- data->trigger_list = at91_adc_triggers;
-
- adc_data = *data;
- platform_device_register(&at91_adc_device);
-}
-#else
-void __init at91_add_device_adc(struct at91_adc_data *data) {}
-#endif
-
-/* -------------------------------------------------------------------- */
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
- if (of_have_populated_dt())
- return 0;
-
- at91_add_device_rtt();
- at91_add_device_watchdog();
- at91_add_device_tc();
- return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
*
*/
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/clk/at91_pmc.h>
-
-#include <asm/proc-fns.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
#include <asm/system_misc.h>
#include <mach/cpu.h>
-#include <mach/at91sam9261.h>
#include <mach/hardware.h>
-#include "at91_aic.h"
#include "soc.h"
#include "generic.h"
-#include "sam9_smc.h"
-#include "pm.h"
-
-#if defined(CONFIG_OLD_CLK_AT91)
-#include "clock.h"
-
-/* --------------------------------------------------------------------
- * Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioA_clk = {
- .name = "pioA_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_PIOA,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
- .name = "pioB_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_PIOB,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioC_clk = {
- .name = "pioC_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_PIOC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
- .name = "usart0_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_US0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
- .name = "usart1_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_US1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
- .name = "usart2_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_US2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc_clk = {
- .name = "mci_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_MCI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk udc_clk = {
- .name = "udc_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_UDP,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi_clk = {
- .name = "twi_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_TWI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
- .name = "spi0_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_SPI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
- .name = "spi1_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_SPI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc0_clk = {
- .name = "ssc0_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_SSC0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc1_clk = {
- .name = "ssc1_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_SSC1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc2_clk = {
- .name = "ssc2_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_SSC2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc0_clk = {
- .name = "tc0_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_TC0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc1_clk = {
- .name = "tc1_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_TC1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc2_clk = {
- .name = "tc2_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_TC2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ohci_clk = {
- .name = "ohci_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_UHP,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk lcdc_clk = {
- .name = "lcdc_clk",
- .pmc_mask = 1 << AT91SAM9261_ID_LCDC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-
-/* HClocks */
-static struct clk hck0 = {
- .name = "hck0",
- .pmc_mask = AT91_PMC_HCK0,
- .type = CLK_TYPE_SYSTEM,
- .id = 0,
-};
-static struct clk hck1 = {
- .name = "hck1",
- .pmc_mask = AT91_PMC_HCK1,
- .type = CLK_TYPE_SYSTEM,
- .id = 1,
-};
-
-static struct clk *periph_clocks[] __initdata = {
- &pioA_clk,
- &pioB_clk,
- &pioC_clk,
- &usart0_clk,
- &usart1_clk,
- &usart2_clk,
- &mmc_clk,
- &udc_clk,
- &twi_clk,
- &spi0_clk,
- &spi1_clk,
- &ssc0_clk,
- &ssc1_clk,
- &ssc2_clk,
- &tc0_clk,
- &tc1_clk,
- &tc2_clk,
- &ohci_clk,
- &lcdc_clk,
- // irq0 .. irq2
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
- CLKDEV_CON_DEV_ID("hclk", "at91sam9261-lcdfb.0", &hck1),
- CLKDEV_CON_DEV_ID("hclk", "at91sam9g10-lcdfb.0", &hck1),
- CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
- CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
- CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
- CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc0_clk),
- CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk),
- CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.2", &ssc2_clk),
- CLKDEV_CON_DEV_ID("pclk", "fffbc000.ssc", &ssc0_clk),
- CLKDEV_CON_DEV_ID("pclk", "fffc0000.ssc", &ssc1_clk),
- CLKDEV_CON_DEV_ID("pclk", "fffc4000.ssc", &ssc2_clk),
- CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &hck0),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9261.0", &twi_clk),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi_clk),
- CLKDEV_CON_ID("pioA", &pioA_clk),
- CLKDEV_CON_ID("pioB", &pioB_clk),
- CLKDEV_CON_ID("pioC", &pioC_clk),
- /* more lookup table for DT entries */
- CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
- CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
- CLKDEV_CON_DEV_ID("usart", "ffffb400.serial", &usart1_clk),
- CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
- CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk),
- CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk),
- CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &hck0),
- CLKDEV_CON_DEV_ID("hclk", "600000.fb", &hck1),
- CLKDEV_CON_DEV_ID("spi_clk", "fffc8000.spi", &spi0_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "fffcc000.spi", &spi1_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "fffa8000.mmc", &mmc_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
-};
-
-static struct clk_lookup usart_clocks_lookups[] = {
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
-};
-
-/*
- * The four programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
- .name = "pck0",
- .pmc_mask = AT91_PMC_PCK0,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 0,
-};
-static struct clk pck1 = {
- .name = "pck1",
- .pmc_mask = AT91_PMC_PCK1,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 1,
-};
-static struct clk pck2 = {
- .name = "pck2",
- .pmc_mask = AT91_PMC_PCK2,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 2,
-};
-static struct clk pck3 = {
- .name = "pck3",
- .pmc_mask = AT91_PMC_PCK3,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 3,
-};
-
-static void __init at91sam9261_register_clocks(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
- clk_register(periph_clocks[i]);
-
- clkdev_add_table(periph_clocks_lookups,
- ARRAY_SIZE(periph_clocks_lookups));
- clkdev_add_table(usart_clocks_lookups,
- ARRAY_SIZE(usart_clocks_lookups));
-
- clk_register(&pck0);
- clk_register(&pck1);
- clk_register(&pck2);
- clk_register(&pck3);
-
- clk_register(&hck0);
- clk_register(&hck1);
-}
-#else
-#define at91sam9261_register_clocks NULL
-#endif
-/* --------------------------------------------------------------------
- * GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91sam9261_gpio[] __initdata = {
- {
- .id = AT91SAM9261_ID_PIOA,
- .regbase = AT91SAM9261_BASE_PIOA,
- }, {
- .id = AT91SAM9261_ID_PIOB,
- .regbase = AT91SAM9261_BASE_PIOB,
- }, {
- .id = AT91SAM9261_ID_PIOC,
- .regbase = AT91SAM9261_BASE_PIOC,
- }
-};
/* --------------------------------------------------------------------
* AT91SAM9261 processor initialization
at91_init_sram(0, AT91SAM9261_SRAM_BASE, AT91SAM9261_SRAM_SIZE);
}
-static void __init at91sam9261_ioremap_registers(void)
-{
- at91_ioremap_ramc(0, AT91SAM9261_BASE_SDRAMC, 512);
- at91sam926x_ioremap_pit(AT91SAM9261_BASE_PIT);
- at91sam9_ioremap_smc(0, AT91SAM9261_BASE_SMC);
- at91_ioremap_matrix(AT91SAM9261_BASE_MATRIX);
- at91_pm_set_standby(at91sam9_sdram_standby);
-}
-
static void __init at91sam9261_initialize(void)
{
arm_pm_idle = at91sam9_idle;
at91_sysirq_mask_rtt(AT91SAM9261_BASE_RTT);
-
- /* Register GPIO subsystem */
- at91_gpio_init(at91sam9261_gpio, 3);
-}
-
-static struct resource rstc_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_RSTC,
- .end = AT91SAM9261_BASE_RSTC + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9261_BASE_SDRAMC,
- .end = AT91SAM9261_BASE_SDRAMC + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device rstc_device = {
- .name = "at91-sam9260-reset",
- .resource = rstc_resources,
- .num_resources = ARRAY_SIZE(rstc_resources),
-};
-
-static struct resource shdwc_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_SHDWC,
- .end = AT91SAM9261_BASE_SHDWC + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device shdwc_device = {
- .name = "at91-poweroff",
- .resource = shdwc_resources,
- .num_resources = ARRAY_SIZE(shdwc_resources),
-};
-
-static void __init at91sam9261_register_devices(void)
-{
- platform_device_register(&rstc_device);
- platform_device_register(&shdwc_device);
-}
-
-/* --------------------------------------------------------------------
- * Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91sam9261_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller */
- 7, /* System Peripherals */
- 1, /* Parallel IO Controller A */
- 1, /* Parallel IO Controller B */
- 1, /* Parallel IO Controller C */
- 0,
- 5, /* USART 0 */
- 5, /* USART 1 */
- 5, /* USART 2 */
- 0, /* Multimedia Card Interface */
- 2, /* USB Device Port */
- 6, /* Two-Wire Interface */
- 5, /* Serial Peripheral Interface 0 */
- 5, /* Serial Peripheral Interface 1 */
- 4, /* Serial Synchronous Controller 0 */
- 4, /* Serial Synchronous Controller 1 */
- 4, /* Serial Synchronous Controller 2 */
- 0, /* Timer Counter 0 */
- 0, /* Timer Counter 1 */
- 0, /* Timer Counter 2 */
- 2, /* USB Host port */
- 3, /* LCD Controller */
- 0,
- 0,
- 0,
- 0,
- 0,
- 0,
- 0,
- 0, /* Advanced Interrupt Controller */
- 0, /* Advanced Interrupt Controller */
- 0, /* Advanced Interrupt Controller */
-};
-
-static void __init at91sam9261_init_time(void)
-{
- at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS);
}
AT91_SOC_START(at91sam9261)
.map_io = at91sam9261_map_io,
- .default_irq_priority = at91sam9261_default_irq_priority,
- .extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1)
- | (1 << AT91SAM9261_ID_IRQ2),
- .ioremap_registers = at91sam9261_ioremap_registers,
- .register_clocks = at91sam9261_register_clocks,
- .register_devices = at91sam9261_register_devices,
.init = at91sam9261_initialize,
- .init_time = at91sam9261_init_time,
AT91_SOC_END
+++ /dev/null
-/*
- * arch/arm/mach-at91/at91sam9261_devices.c
- *
- * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
- * Copyright (C) 2005 David Brownell
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/i2c-gpio.h>
-
-#include <linux/fb.h>
-#include <video/atmel_lcdc.h>
-
-#include <mach/at91sam9261.h>
-#include <mach/at91sam9261_matrix.h>
-#include <mach/at91_matrix.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/hardware.h>
-
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-/* --------------------------------------------------------------------
- * USB Host
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_data;
-
-static struct resource usbh_resources[] = {
- [0] = {
- .start = AT91SAM9261_UHP_BASE,
- .end = AT91SAM9261_UHP_BASE + SZ_1M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9261_ID_UHP,
- .end = NR_IRQS_LEGACY + AT91SAM9261_ID_UHP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9261_usbh_device = {
- .name = "at91_ohci",
- .id = -1,
- .dev = {
- .dma_mask = &ohci_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &usbh_data,
- },
- .resource = usbh_resources,
- .num_resources = ARRAY_SIZE(usbh_resources),
-};
-
-void __init at91_add_device_usbh(struct at91_usbh_data *data)
-{
- int i;
-
- if (!data)
- return;
-
- /* Enable overcurrent notification */
- for (i = 0; i < data->ports; i++) {
- if (gpio_is_valid(data->overcurrent_pin[i]))
- at91_set_gpio_input(data->overcurrent_pin[i], 1);
- }
-
- usbh_data = *data;
- platform_device_register(&at91sam9261_usbh_device);
-}
-#else
-void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * USB Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
-static struct at91_udc_data udc_data;
-
-static struct resource udc_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_UDP,
- .end = AT91SAM9261_BASE_UDP + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9261_ID_UDP,
- .end = NR_IRQS_LEGACY + AT91SAM9261_ID_UDP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9261_udc_device = {
- .name = "at91_udc",
- .id = -1,
- .dev = {
- .platform_data = &udc_data,
- },
- .resource = udc_resources,
- .num_resources = ARRAY_SIZE(udc_resources),
-};
-
-void __init at91_add_device_udc(struct at91_udc_data *data)
-{
- if (!data)
- return;
-
- if (gpio_is_valid(data->vbus_pin)) {
- at91_set_gpio_input(data->vbus_pin, 0);
- at91_set_deglitch(data->vbus_pin, 1);
- }
-
- /* Pullup pin is handled internally by USB device peripheral */
-
- udc_data = *data;
- platform_device_register(&at91sam9261_udc_device);
-}
-#else
-void __init at91_add_device_udc(struct at91_udc_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
- * MMC / SD
- * -------------------------------------------------------------------- */
-
-#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct mci_platform_data mmc_data;
-
-static struct resource mmc_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_MCI,
- .end = AT91SAM9261_BASE_MCI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9261_ID_MCI,
- .end = NR_IRQS_LEGACY + AT91SAM9261_ID_MCI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9261_mmc_device = {
- .name = "atmel_mci",
- .id = -1,
- .dev = {
- .dma_mask = &mmc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc_data,
- },
- .resource = mmc_resources,
- .num_resources = ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
-{
- if (!data)
- return;
-
- if (data->slot[0].bus_width) {
- /* input/irq */
- if (gpio_is_valid(data->slot[0].detect_pin)) {
- at91_set_gpio_input(data->slot[0].detect_pin, 1);
- at91_set_deglitch(data->slot[0].detect_pin, 1);
- }
- if (gpio_is_valid(data->slot[0].wp_pin))
- at91_set_gpio_input(data->slot[0].wp_pin, 1);
-
- /* CLK */
- at91_set_B_periph(AT91_PIN_PA2, 0);
-
- /* CMD */
- at91_set_B_periph(AT91_PIN_PA1, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_B_periph(AT91_PIN_PA0, 1);
- if (data->slot[0].bus_width == 4) {
- at91_set_B_periph(AT91_PIN_PA4, 1);
- at91_set_B_periph(AT91_PIN_PA5, 1);
- at91_set_B_periph(AT91_PIN_PA6, 1);
- }
-
- mmc_data = *data;
- platform_device_register(&at91sam9261_mmc_device);
- }
-}
-#else
-void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
-static struct atmel_nand_data nand_data;
-
-#define NAND_BASE AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
- {
- .start = NAND_BASE,
- .end = NAND_BASE + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device atmel_nand_device = {
- .name = "atmel_nand",
- .id = -1,
- .dev = {
- .platform_data = &nand_data,
- },
- .resource = nand_resources,
- .num_resources = ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct atmel_nand_data *data)
-{
- unsigned long csa;
-
- if (!data)
- return;
-
- csa = at91_matrix_read(AT91_MATRIX_EBICSA);
- at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
-
- /* enable pin */
- if (gpio_is_valid(data->enable_pin))
- at91_set_gpio_output(data->enable_pin, 1);
-
- /* ready/busy pin */
- if (gpio_is_valid(data->rdy_pin))
- at91_set_gpio_input(data->rdy_pin, 1);
-
- /* card detect pin */
- if (gpio_is_valid(data->det_pin))
- at91_set_gpio_input(data->det_pin, 1);
-
- at91_set_A_periph(AT91_PIN_PC0, 0); /* NANDOE */
- at91_set_A_periph(AT91_PIN_PC1, 0); /* NANDWE */
-
- nand_data = *data;
- platform_device_register(&atmel_nand_device);
-}
-
-#else
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * TWI (i2c)
- * -------------------------------------------------------------------- */
-
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
- .sda_pin = AT91_PIN_PA7,
- .sda_is_open_drain = 1,
- .scl_pin = AT91_PIN_PA8,
- .scl_is_open_drain = 1,
- .udelay = 2, /* ~100 kHz */
-};
-
-static struct platform_device at91sam9261_twi_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev.platform_data = &pdata,
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- at91_set_GPIO_periph(AT91_PIN_PA7, 1); /* TWD (SDA) */
- at91_set_multi_drive(AT91_PIN_PA7, 1);
-
- at91_set_GPIO_periph(AT91_PIN_PA8, 1); /* TWCK (SCL) */
- at91_set_multi_drive(AT91_PIN_PA8, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91sam9261_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_TWI,
- .end = AT91SAM9261_BASE_TWI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TWI,
- .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TWI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9261_twi_device = {
- .id = 0,
- .resource = twi_resources,
- .num_resources = ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- /* IP version is not the same on 9261 and g10 */
- if (cpu_is_at91sam9g10()) {
- at91sam9261_twi_device.name = "i2c-at91sam9g10";
- /* I2C PIO must not be configured as open-drain on this chip */
- } else {
- at91sam9261_twi_device.name = "i2c-at91sam9261";
- at91_set_multi_drive(AT91_PIN_PA7, 1);
- at91_set_multi_drive(AT91_PIN_PA8, 1);
- }
-
- /* pins used for TWI interface */
- at91_set_A_periph(AT91_PIN_PA7, 0); /* TWD */
- at91_set_A_periph(AT91_PIN_PA8, 0); /* TWCK */
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91sam9261_twi_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-static struct resource spi0_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_SPI0,
- .end = AT91SAM9261_BASE_SPI0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI0,
- .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9261_spi0_device = {
- .name = "atmel_spi",
- .id = 0,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi0_resources,
- .num_resources = ARRAY_SIZE(spi0_resources),
-};
-
-static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PA5, AT91_PIN_PA6 };
-
-static struct resource spi1_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_SPI1,
- .end = AT91SAM9261_BASE_SPI1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI1,
- .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SPI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9261_spi1_device = {
- .name = "atmel_spi",
- .id = 1,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi1_resources,
- .num_resources = ARRAY_SIZE(spi1_resources),
-};
-
-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB28, AT91_PIN_PA24, AT91_PIN_PA25, AT91_PIN_PA26 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
- int i;
- unsigned long cs_pin;
- short enable_spi0 = 0;
- short enable_spi1 = 0;
-
- /* Choose SPI chip-selects */
- for (i = 0; i < nr_devices; i++) {
- if (devices[i].controller_data)
- cs_pin = (unsigned long) devices[i].controller_data;
- else if (devices[i].bus_num == 0)
- cs_pin = spi0_standard_cs[devices[i].chip_select];
- else
- cs_pin = spi1_standard_cs[devices[i].chip_select];
-
- if (!gpio_is_valid(cs_pin))
- continue;
-
- if (devices[i].bus_num == 0)
- enable_spi0 = 1;
- else
- enable_spi1 = 1;
-
- /* enable chip-select pin */
- at91_set_gpio_output(cs_pin, 1);
-
- /* pass chip-select pin to driver */
- devices[i].controller_data = (void *) cs_pin;
- }
-
- spi_register_board_info(devices, nr_devices);
-
- /* Configure SPI bus(es) */
- if (enable_spi0) {
- at91_set_A_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
- at91_set_A_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
- at91_set_A_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
-
- platform_device_register(&at91sam9261_spi0_device);
- }
- if (enable_spi1) {
- at91_set_A_periph(AT91_PIN_PB30, 0); /* SPI1_MISO */
- at91_set_A_periph(AT91_PIN_PB31, 0); /* SPI1_MOSI */
- at91_set_A_periph(AT91_PIN_PB29, 0); /* SPI1_SPCK */
-
- platform_device_register(&at91sam9261_spi1_device);
- }
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * LCD Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_pdata lcdc_data;
-
-static struct resource lcdc_resources[] = {
- [0] = {
- .start = AT91SAM9261_LCDC_BASE,
- .end = AT91SAM9261_LCDC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9261_ID_LCDC,
- .end = NR_IRQS_LEGACY + AT91SAM9261_ID_LCDC,
- .flags = IORESOURCE_IRQ,
- },
-#if defined(CONFIG_FB_INTSRAM)
- [2] = {
- .start = AT91SAM9261_SRAM_BASE,
- .end = AT91SAM9261_SRAM_BASE + AT91SAM9261_SRAM_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-#endif
-};
-
-static struct platform_device at91_lcdc_device = {
- .id = 0,
- .dev = {
- .dma_mask = &lcdc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &lcdc_data,
- },
- .resource = lcdc_resources,
- .num_resources = ARRAY_SIZE(lcdc_resources),
-};
-
-void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data)
-{
- if (!data) {
- return;
- }
-
- if (cpu_is_at91sam9g10())
- at91_lcdc_device.name = "at91sam9g10-lcdfb";
- else
- at91_lcdc_device.name = "at91sam9261-lcdfb";
-
-#if defined(CONFIG_FB_ATMEL_STN)
- at91_set_A_periph(AT91_PIN_PB0, 0); /* LCDVSYNC */
- at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
- at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
- at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
- at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */
- at91_set_A_periph(AT91_PIN_PB5, 0); /* LCDD0 */
- at91_set_A_periph(AT91_PIN_PB6, 0); /* LCDD1 */
- at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */
- at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */
-#else
- at91_set_A_periph(AT91_PIN_PB1, 0); /* LCDHSYNC */
- at91_set_A_periph(AT91_PIN_PB2, 0); /* LCDDOTCK */
- at91_set_A_periph(AT91_PIN_PB3, 0); /* LCDDEN */
- at91_set_A_periph(AT91_PIN_PB4, 0); /* LCDCC */
- at91_set_A_periph(AT91_PIN_PB7, 0); /* LCDD2 */
- at91_set_A_periph(AT91_PIN_PB8, 0); /* LCDD3 */
- at91_set_A_periph(AT91_PIN_PB9, 0); /* LCDD4 */
- at91_set_A_periph(AT91_PIN_PB10, 0); /* LCDD5 */
- at91_set_A_periph(AT91_PIN_PB11, 0); /* LCDD6 */
- at91_set_A_periph(AT91_PIN_PB12, 0); /* LCDD7 */
- at91_set_A_periph(AT91_PIN_PB15, 0); /* LCDD10 */
- at91_set_A_periph(AT91_PIN_PB16, 0); /* LCDD11 */
- at91_set_A_periph(AT91_PIN_PB17, 0); /* LCDD12 */
- at91_set_A_periph(AT91_PIN_PB18, 0); /* LCDD13 */
- at91_set_A_periph(AT91_PIN_PB19, 0); /* LCDD14 */
- at91_set_A_periph(AT91_PIN_PB20, 0); /* LCDD15 */
- at91_set_B_periph(AT91_PIN_PB23, 0); /* LCDD18 */
- at91_set_B_periph(AT91_PIN_PB24, 0); /* LCDD19 */
- at91_set_B_periph(AT91_PIN_PB25, 0); /* LCDD20 */
- at91_set_B_periph(AT91_PIN_PB26, 0); /* LCDD21 */
- at91_set_B_periph(AT91_PIN_PB27, 0); /* LCDD22 */
- at91_set_B_periph(AT91_PIN_PB28, 0); /* LCDD23 */
-#endif
-
- if (ARRAY_SIZE(lcdc_resources) > 2) {
- void __iomem *fb;
- struct resource *fb_res = &lcdc_resources[2];
- size_t fb_len = resource_size(fb_res);
-
- fb = ioremap(fb_res->start, fb_len);
- if (fb) {
- memset(fb, 0, fb_len);
- iounmap(fb);
- }
- }
- lcdc_data = *data;
- platform_device_register(&at91_lcdc_device);
-}
-#else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Timer/Counter block
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_ATMEL_TCLIB
-
-static struct resource tcb_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_TCB0,
- .end = AT91SAM9261_BASE_TCB0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TC0,
- .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TC0,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TC1,
- .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TC1,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = NR_IRQS_LEGACY + AT91SAM9261_ID_TC2,
- .end = NR_IRQS_LEGACY + AT91SAM9261_ID_TC2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9261_tcb_device = {
- .name = "atmel_tcb",
- .id = 0,
- .resource = tcb_resources,
- .num_resources = ARRAY_SIZE(tcb_resources),
-};
-
-static void __init at91_add_device_tc(void)
-{
- platform_device_register(&at91sam9261_tcb_device);
-}
-#else
-static void __init at91_add_device_tc(void) { }
-#endif
-
-
-/* --------------------------------------------------------------------
- * RTT
- * -------------------------------------------------------------------- */
-
-static struct resource rtt_resources[] = {
- {
- .start = AT91SAM9261_BASE_RTT,
- .end = AT91SAM9261_BASE_RTT + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .flags = IORESOURCE_MEM,
- }, {
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device at91sam9261_rtt_device = {
- .name = "at91_rtt",
- .id = 0,
- .resource = rtt_resources,
-};
-
-#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
-static void __init at91_add_device_rtt_rtc(void)
-{
- at91sam9261_rtt_device.name = "rtc-at91sam9";
- /*
- * The second resource is needed:
- * GPBR will serve as the storage for RTC time offset
- */
- at91sam9261_rtt_device.num_resources = 3;
- rtt_resources[1].start = AT91SAM9261_BASE_GPBR +
- 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
- rtt_resources[1].end = rtt_resources[1].start + 3;
- rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
- rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
-}
-#else
-static void __init at91_add_device_rtt_rtc(void)
-{
- /* Only one resource is needed: RTT not used as RTC */
- at91sam9261_rtt_device.num_resources = 1;
-}
-#endif
-
-static void __init at91_add_device_rtt(void)
-{
- at91_add_device_rtt_rtc();
- platform_device_register(&at91sam9261_rtt_device);
-}
-
-
-/* --------------------------------------------------------------------
- * Watchdog
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
-static struct resource wdt_resources[] = {
- {
- .start = AT91SAM9261_BASE_WDT,
- .end = AT91SAM9261_BASE_WDT + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at91sam9261_wdt_device = {
- .name = "at91_wdt",
- .id = -1,
- .resource = wdt_resources,
- .num_resources = ARRAY_SIZE(wdt_resources),
-};
-
-static void __init at91_add_device_watchdog(void)
-{
- platform_device_register(&at91sam9261_wdt_device);
-}
-#else
-static void __init at91_add_device_watchdog(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * SSC -- Synchronous Serial Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
-static u64 ssc0_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc0_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_SSC0,
- .end = AT91SAM9261_BASE_SSC0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC0,
- .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9261_ssc0_device = {
- .name = "at91rm9200_ssc",
- .id = 0,
- .dev = {
- .dma_mask = &ssc0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ssc0_resources,
- .num_resources = ARRAY_SIZE(ssc0_resources),
-};
-
-static inline void configure_ssc0_pins(unsigned pins)
-{
- if (pins & ATMEL_SSC_TF)
- at91_set_A_periph(AT91_PIN_PB21, 1);
- if (pins & ATMEL_SSC_TK)
- at91_set_A_periph(AT91_PIN_PB22, 1);
- if (pins & ATMEL_SSC_TD)
- at91_set_A_periph(AT91_PIN_PB23, 1);
- if (pins & ATMEL_SSC_RD)
- at91_set_A_periph(AT91_PIN_PB24, 1);
- if (pins & ATMEL_SSC_RK)
- at91_set_A_periph(AT91_PIN_PB25, 1);
- if (pins & ATMEL_SSC_RF)
- at91_set_A_periph(AT91_PIN_PB26, 1);
-}
-
-static u64 ssc1_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc1_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_SSC1,
- .end = AT91SAM9261_BASE_SSC1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC1,
- .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9261_ssc1_device = {
- .name = "at91rm9200_ssc",
- .id = 1,
- .dev = {
- .dma_mask = &ssc1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ssc1_resources,
- .num_resources = ARRAY_SIZE(ssc1_resources),
-};
-
-static inline void configure_ssc1_pins(unsigned pins)
-{
- if (pins & ATMEL_SSC_TF)
- at91_set_B_periph(AT91_PIN_PA17, 1);
- if (pins & ATMEL_SSC_TK)
- at91_set_B_periph(AT91_PIN_PA18, 1);
- if (pins & ATMEL_SSC_TD)
- at91_set_B_periph(AT91_PIN_PA19, 1);
- if (pins & ATMEL_SSC_RD)
- at91_set_B_periph(AT91_PIN_PA20, 1);
- if (pins & ATMEL_SSC_RK)
- at91_set_B_periph(AT91_PIN_PA21, 1);
- if (pins & ATMEL_SSC_RF)
- at91_set_B_periph(AT91_PIN_PA22, 1);
-}
-
-static u64 ssc2_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc2_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_SSC2,
- .end = AT91SAM9261_BASE_SSC2 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC2,
- .end = NR_IRQS_LEGACY + AT91SAM9261_ID_SSC2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9261_ssc2_device = {
- .name = "at91rm9200_ssc",
- .id = 2,
- .dev = {
- .dma_mask = &ssc2_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ssc2_resources,
- .num_resources = ARRAY_SIZE(ssc2_resources),
-};
-
-static inline void configure_ssc2_pins(unsigned pins)
-{
- if (pins & ATMEL_SSC_TF)
- at91_set_B_periph(AT91_PIN_PC25, 1);
- if (pins & ATMEL_SSC_TK)
- at91_set_B_periph(AT91_PIN_PC26, 1);
- if (pins & ATMEL_SSC_TD)
- at91_set_B_periph(AT91_PIN_PC27, 1);
- if (pins & ATMEL_SSC_RD)
- at91_set_B_periph(AT91_PIN_PC28, 1);
- if (pins & ATMEL_SSC_RK)
- at91_set_B_periph(AT91_PIN_PC29, 1);
- if (pins & ATMEL_SSC_RF)
- at91_set_B_periph(AT91_PIN_PC30, 1);
-}
-
-/*
- * SSC controllers are accessed through library code, instead of any
- * kind of all-singing/all-dancing driver. For example one could be
- * used by a particular I2S audio codec's driver, while another one
- * on the same system might be used by a custom data capture driver.
- */
-void __init at91_add_device_ssc(unsigned id, unsigned pins)
-{
- struct platform_device *pdev;
-
- /*
- * NOTE: caller is responsible for passing information matching
- * "pins" to whatever will be using each particular controller.
- */
- switch (id) {
- case AT91SAM9261_ID_SSC0:
- pdev = &at91sam9261_ssc0_device;
- configure_ssc0_pins(pins);
- break;
- case AT91SAM9261_ID_SSC1:
- pdev = &at91sam9261_ssc1_device;
- configure_ssc1_pins(pins);
- break;
- case AT91SAM9261_ID_SSC2:
- pdev = &at91sam9261_ssc2_device;
- configure_ssc2_pins(pins);
- break;
- default:
- return;
- }
-
- platform_device_register(pdev);
-}
-
-#else
-void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_DBGU,
- .end = AT91SAM9261_BASE_DBGU + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91_ID_SYS,
- .end = NR_IRQS_LEGACY + AT91_ID_SYS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data dbgu_data = {
- .use_dma_tx = 0,
- .use_dma_rx = 0, /* DBGU not capable of receive DMA */
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9261_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
- .dma_mask = &dbgu_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &dbgu_data,
- },
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PA9, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PA10, 1); /* DTXD */
-}
-
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_US0,
- .end = AT91SAM9261_BASE_US0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9261_ID_US0,
- .end = NR_IRQS_LEGACY + AT91SAM9261_ID_US0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart0_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9261_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
- .dma_mask = &uart0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart0_data,
- },
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PC8, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PC9, 0); /* RXD0 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PC10, 0); /* RTS0 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PC11, 0); /* CTS0 */
-}
-
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_US1,
- .end = AT91SAM9261_BASE_US1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9261_ID_US1,
- .end = NR_IRQS_LEGACY + AT91SAM9261_ID_US1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart1_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9261_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
- .dma_mask = &uart1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart1_data,
- },
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PC12, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PC13, 0); /* RXD1 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PA12, 0); /* RTS1 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PA13, 0); /* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT91SAM9261_BASE_US2,
- .end = AT91SAM9261_BASE_US2 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9261_ID_US2,
- .end = NR_IRQS_LEGACY + AT91SAM9261_ID_US2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart2_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9261_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
- .dma_mask = &uart2_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart2_data,
- },
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PC15, 0); /* RXD2 */
- at91_set_A_periph(AT91_PIN_PC14, 1); /* TXD2 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PA15, 0); /* RTS2*/
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PA16, 0); /* CTS2 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
- struct platform_device *pdev;
- struct atmel_uart_data *pdata;
-
- switch (id) {
- case 0: /* DBGU */
- pdev = &at91sam9261_dbgu_device;
- configure_dbgu_pins();
- break;
- case AT91SAM9261_ID_US0:
- pdev = &at91sam9261_uart0_device;
- configure_usart0_pins(pins);
- break;
- case AT91SAM9261_ID_US1:
- pdev = &at91sam9261_uart1_device;
- configure_usart1_pins(pins);
- break;
- case AT91SAM9261_ID_US2:
- pdev = &at91sam9261_uart2_device;
- configure_usart2_pins(pins);
- break;
- default:
- return;
- }
- pdata = pdev->dev.platform_data;
- pdata->num = portnr; /* update to mapped ID */
-
- if (portnr < ATMEL_MAX_UART)
- at91_uarts[portnr] = pdev;
-}
-
-void __init at91_add_device_serial(void)
-{
- int i;
-
- for (i = 0; i < ATMEL_MAX_UART; i++) {
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-}
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-
-/* -------------------------------------------------------------------- */
-
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
- at91_add_device_rtt();
- at91_add_device_watchdog();
- at91_add_device_tc();
- return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
*
*/
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/clk/at91_pmc.h>
-
-#include <asm/proc-fns.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
#include <asm/system_misc.h>
-#include <mach/at91sam9263.h>
#include <mach/hardware.h>
-#include "at91_aic.h"
#include "soc.h"
#include "generic.h"
-#include "sam9_smc.h"
-#include "pm.h"
-
-#if defined(CONFIG_OLD_CLK_AT91)
-#include "clock.h"
-/* --------------------------------------------------------------------
- * Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioA_clk = {
- .name = "pioA_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_PIOA,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
- .name = "pioB_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_PIOB,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioCDE_clk = {
- .name = "pioCDE_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_PIOCDE,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
- .name = "usart0_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_US0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
- .name = "usart1_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_US1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
- .name = "usart2_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_US2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc0_clk = {
- .name = "mci0_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_MCI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc1_clk = {
- .name = "mci1_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_MCI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk can_clk = {
- .name = "can_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_CAN,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi_clk = {
- .name = "twi_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_TWI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
- .name = "spi0_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_SPI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
- .name = "spi1_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_SPI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc0_clk = {
- .name = "ssc0_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_SSC0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc1_clk = {
- .name = "ssc1_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_SSC1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ac97_clk = {
- .name = "ac97_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_AC97C,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tcb_clk = {
- .name = "tcb_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_TCB,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pwm_clk = {
- .name = "pwm_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_PWMC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk macb_clk = {
- .name = "pclk",
- .pmc_mask = 1 << AT91SAM9263_ID_EMAC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk dma_clk = {
- .name = "dma_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_DMA,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk twodge_clk = {
- .name = "2dge_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_2DGE,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk udc_clk = {
- .name = "udc_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_UDP,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk isi_clk = {
- .name = "isi_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_ISI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk lcdc_clk = {
- .name = "lcdc_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_LCDC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ohci_clk = {
- .name = "ohci_clk",
- .pmc_mask = 1 << AT91SAM9263_ID_UHP,
- .type = CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
- &pioA_clk,
- &pioB_clk,
- &pioCDE_clk,
- &usart0_clk,
- &usart1_clk,
- &usart2_clk,
- &mmc0_clk,
- &mmc1_clk,
- &can_clk,
- &twi_clk,
- &spi0_clk,
- &spi1_clk,
- &ssc0_clk,
- &ssc1_clk,
- &ac97_clk,
- &tcb_clk,
- &pwm_clk,
- &macb_clk,
- &twodge_clk,
- &udc_clk,
- &isi_clk,
- &lcdc_clk,
- &dma_clk,
- &ohci_clk,
- // irq0 .. irq1
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
- /* One additional fake clock for macb_hclk */
- CLKDEV_CON_ID("hclk", &macb_clk),
- CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc0_clk),
- CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk),
- CLKDEV_CON_DEV_ID("pclk", "fff98000.ssc", &ssc0_clk),
- CLKDEV_CON_DEV_ID("pclk", "fff9c000.ssc", &ssc1_clk),
- CLKDEV_CON_DEV_ID("hclk", "at91sam9263-lcdfb.0", &lcdc_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb_clk),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9260.0", &twi_clk),
- CLKDEV_CON_DEV_ID(NULL, "at91sam9rl-pwm", &pwm_clk),
- /* fake hclk clock */
- CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &ohci_clk),
- CLKDEV_CON_ID("pioA", &pioA_clk),
- CLKDEV_CON_ID("pioB", &pioB_clk),
- CLKDEV_CON_ID("pioC", &pioCDE_clk),
- CLKDEV_CON_ID("pioD", &pioCDE_clk),
- CLKDEV_CON_ID("pioE", &pioCDE_clk),
- /* more usart lookup table for DT entries */
- CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
- CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk),
- CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk),
- CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
- /* more tc lookup table for DT entries */
- CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb_clk),
- CLKDEV_CON_DEV_ID("hclk", "a00000.ohci", &ohci_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "fff80000.mmc", &mmc0_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "fff84000.mmc", &mmc1_clk),
- CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioCDE_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCDE_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCDE_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffb8000.pwm", &pwm_clk),
-};
-
-static struct clk_lookup usart_clocks_lookups[] = {
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
-};
-
-/*
- * The four programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
- .name = "pck0",
- .pmc_mask = AT91_PMC_PCK0,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 0,
-};
-static struct clk pck1 = {
- .name = "pck1",
- .pmc_mask = AT91_PMC_PCK1,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 1,
-};
-static struct clk pck2 = {
- .name = "pck2",
- .pmc_mask = AT91_PMC_PCK2,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 2,
-};
-static struct clk pck3 = {
- .name = "pck3",
- .pmc_mask = AT91_PMC_PCK3,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 3,
-};
-
-static void __init at91sam9263_register_clocks(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
- clk_register(periph_clocks[i]);
-
- clkdev_add_table(periph_clocks_lookups,
- ARRAY_SIZE(periph_clocks_lookups));
- clkdev_add_table(usart_clocks_lookups,
- ARRAY_SIZE(usart_clocks_lookups));
-
- clk_register(&pck0);
- clk_register(&pck1);
- clk_register(&pck2);
- clk_register(&pck3);
-}
-#else
-#define at91sam9263_register_clocks NULL
-#endif
-
-/* --------------------------------------------------------------------
- * GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91sam9263_gpio[] __initdata = {
- {
- .id = AT91SAM9263_ID_PIOA,
- .regbase = AT91SAM9263_BASE_PIOA,
- }, {
- .id = AT91SAM9263_ID_PIOB,
- .regbase = AT91SAM9263_BASE_PIOB,
- }, {
- .id = AT91SAM9263_ID_PIOCDE,
- .regbase = AT91SAM9263_BASE_PIOC,
- }, {
- .id = AT91SAM9263_ID_PIOCDE,
- .regbase = AT91SAM9263_BASE_PIOD,
- }, {
- .id = AT91SAM9263_ID_PIOCDE,
- .regbase = AT91SAM9263_BASE_PIOE,
- }
-};
/* --------------------------------------------------------------------
* AT91SAM9263 processor initialization
at91_init_sram(1, AT91SAM9263_SRAM1_BASE, AT91SAM9263_SRAM1_SIZE);
}
-static void __init at91sam9263_ioremap_registers(void)
-{
- at91_ioremap_ramc(0, AT91SAM9263_BASE_SDRAMC0, 512);
- at91_ioremap_ramc(1, AT91SAM9263_BASE_SDRAMC1, 512);
- at91sam926x_ioremap_pit(AT91SAM9263_BASE_PIT);
- at91sam9_ioremap_smc(0, AT91SAM9263_BASE_SMC0);
- at91sam9_ioremap_smc(1, AT91SAM9263_BASE_SMC1);
- at91_ioremap_matrix(AT91SAM9263_BASE_MATRIX);
- at91_pm_set_standby(at91sam9_sdram_standby);
-}
-
static void __init at91sam9263_initialize(void)
{
arm_pm_idle = at91sam9_idle;
at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT0);
at91_sysirq_mask_rtt(AT91SAM9263_BASE_RTT1);
-
- /* Register GPIO subsystem */
- at91_gpio_init(at91sam9263_gpio, 5);
-}
-
-static struct resource rstc_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_RSTC,
- .end = AT91SAM9263_BASE_RSTC + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9263_BASE_SDRAMC0,
- .end = AT91SAM9263_BASE_SDRAMC0 + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device rstc_device = {
- .name = "at91-sam9260-reset",
- .resource = rstc_resources,
- .num_resources = ARRAY_SIZE(rstc_resources),
-};
-
-static struct resource shdwc_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_SHDWC,
- .end = AT91SAM9263_BASE_SHDWC + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device shdwc_device = {
- .name = "at91-poweroff",
- .resource = shdwc_resources,
- .num_resources = ARRAY_SIZE(shdwc_resources),
-};
-
-static void __init at91sam9263_register_devices(void)
-{
- platform_device_register(&rstc_device);
- platform_device_register(&shdwc_device);
-}
-
-/* --------------------------------------------------------------------
- * Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91sam9263_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller (FIQ) */
- 7, /* System Peripherals */
- 1, /* Parallel IO Controller A */
- 1, /* Parallel IO Controller B */
- 1, /* Parallel IO Controller C, D and E */
- 0,
- 0,
- 5, /* USART 0 */
- 5, /* USART 1 */
- 5, /* USART 2 */
- 0, /* Multimedia Card Interface 0 */
- 0, /* Multimedia Card Interface 1 */
- 3, /* CAN */
- 6, /* Two-Wire Interface */
- 5, /* Serial Peripheral Interface 0 */
- 5, /* Serial Peripheral Interface 1 */
- 4, /* Serial Synchronous Controller 0 */
- 4, /* Serial Synchronous Controller 1 */
- 5, /* AC97 Controller */
- 0, /* Timer Counter 0, 1 and 2 */
- 0, /* Pulse Width Modulation Controller */
- 3, /* Ethernet */
- 0,
- 0, /* 2D Graphic Engine */
- 2, /* USB Device Port */
- 0, /* Image Sensor Interface */
- 3, /* LDC Controller */
- 0, /* DMA Controller */
- 0,
- 2, /* USB Host port */
- 0, /* Advanced Interrupt Controller (IRQ0) */
- 0, /* Advanced Interrupt Controller (IRQ1) */
-};
-
-static void __init at91sam9263_init_time(void)
-{
- at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS);
}
AT91_SOC_START(at91sam9263)
.map_io = at91sam9263_map_io,
- .default_irq_priority = at91sam9263_default_irq_priority,
- .extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1),
- .ioremap_registers = at91sam9263_ioremap_registers,
- .register_clocks = at91sam9263_register_clocks,
- .register_devices = at91sam9263_register_devices,
.init = at91sam9263_initialize,
- .init_time = at91sam9263_init_time,
AT91_SOC_END
+++ /dev/null
-/*
- * arch/arm/mach-at91/at91sam9263_devices.c
- *
- * Copyright (C) 2007 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/i2c-gpio.h>
-
-#include <linux/fb.h>
-#include <video/atmel_lcdc.h>
-
-#include <mach/at91sam9263.h>
-#include <mach/at91sam9263_matrix.h>
-#include <mach/at91_matrix.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/hardware.h>
-
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-/* --------------------------------------------------------------------
- * USB Host
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_data;
-
-static struct resource usbh_resources[] = {
- [0] = {
- .start = AT91SAM9263_UHP_BASE,
- .end = AT91SAM9263_UHP_BASE + SZ_1M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_UHP,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_UHP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91_usbh_device = {
- .name = "at91_ohci",
- .id = -1,
- .dev = {
- .dma_mask = &ohci_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &usbh_data,
- },
- .resource = usbh_resources,
- .num_resources = ARRAY_SIZE(usbh_resources),
-};
-
-void __init at91_add_device_usbh(struct at91_usbh_data *data)
-{
- int i;
-
- if (!data)
- return;
-
- /* Enable VBus control for UHP ports */
- for (i = 0; i < data->ports; i++) {
- if (gpio_is_valid(data->vbus_pin[i]))
- at91_set_gpio_output(data->vbus_pin[i],
- data->vbus_pin_active_low[i]);
- }
-
- /* Enable overcurrent notification */
- for (i = 0; i < data->ports; i++) {
- if (gpio_is_valid(data->overcurrent_pin[i]))
- at91_set_gpio_input(data->overcurrent_pin[i], 1);
- }
-
- usbh_data = *data;
- platform_device_register(&at91_usbh_device);
-}
-#else
-void __init at91_add_device_usbh(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * USB Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_AT91) || defined(CONFIG_USB_AT91_MODULE)
-static struct at91_udc_data udc_data;
-
-static struct resource udc_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_UDP,
- .end = AT91SAM9263_BASE_UDP + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_UDP,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_UDP,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91_udc_device = {
- .name = "at91_udc",
- .id = -1,
- .dev = {
- .platform_data = &udc_data,
- },
- .resource = udc_resources,
- .num_resources = ARRAY_SIZE(udc_resources),
-};
-
-void __init at91_add_device_udc(struct at91_udc_data *data)
-{
- if (!data)
- return;
-
- if (gpio_is_valid(data->vbus_pin)) {
- at91_set_gpio_input(data->vbus_pin, 0);
- at91_set_deglitch(data->vbus_pin, 1);
- }
-
- /* Pullup pin is handled internally by USB device peripheral */
-
- udc_data = *data;
- platform_device_register(&at91_udc_device);
-}
-#else
-void __init at91_add_device_udc(struct at91_udc_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Ethernet
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct macb_platform_data eth_data;
-
-static struct resource eth_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_EMAC,
- .end = AT91SAM9263_BASE_EMAC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_EMAC,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_EMAC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_eth_device = {
- .name = "macb",
- .id = -1,
- .dev = {
- .dma_mask = ð_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = ð_data,
- },
- .resource = eth_resources,
- .num_resources = ARRAY_SIZE(eth_resources),
-};
-
-void __init at91_add_device_eth(struct macb_platform_data *data)
-{
- if (!data)
- return;
-
- if (gpio_is_valid(data->phy_irq_pin)) {
- at91_set_gpio_input(data->phy_irq_pin, 0);
- at91_set_deglitch(data->phy_irq_pin, 1);
- }
-
- /* Pins used for MII and RMII */
- at91_set_A_periph(AT91_PIN_PE21, 0); /* ETXCK_EREFCK */
- at91_set_B_periph(AT91_PIN_PC25, 0); /* ERXDV */
- at91_set_A_periph(AT91_PIN_PE25, 0); /* ERX0 */
- at91_set_A_periph(AT91_PIN_PE26, 0); /* ERX1 */
- at91_set_A_periph(AT91_PIN_PE27, 0); /* ERXER */
- at91_set_A_periph(AT91_PIN_PE28, 0); /* ETXEN */
- at91_set_A_periph(AT91_PIN_PE23, 0); /* ETX0 */
- at91_set_A_periph(AT91_PIN_PE24, 0); /* ETX1 */
- at91_set_A_periph(AT91_PIN_PE30, 0); /* EMDIO */
- at91_set_A_periph(AT91_PIN_PE29, 0); /* EMDC */
-
- if (!data->is_rmii) {
- at91_set_A_periph(AT91_PIN_PE22, 0); /* ECRS */
- at91_set_B_periph(AT91_PIN_PC26, 0); /* ECOL */
- at91_set_B_periph(AT91_PIN_PC22, 0); /* ERX2 */
- at91_set_B_periph(AT91_PIN_PC23, 0); /* ERX3 */
- at91_set_B_periph(AT91_PIN_PC27, 0); /* ERXCK */
- at91_set_B_periph(AT91_PIN_PC20, 0); /* ETX2 */
- at91_set_B_periph(AT91_PIN_PC21, 0); /* ETX3 */
- at91_set_B_periph(AT91_PIN_PC24, 0); /* ETXER */
- }
-
- eth_data = *data;
- platform_device_register(&at91sam9263_eth_device);
-}
-#else
-void __init at91_add_device_eth(struct macb_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * MMC / SD
- * -------------------------------------------------------------------- */
-
-#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct mci_platform_data mmc0_data, mmc1_data;
-
-static struct resource mmc0_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_MCI0,
- .end = AT91SAM9263_BASE_MCI0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI0,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_mmc0_device = {
- .name = "atmel_mci",
- .id = 0,
- .dev = {
- .dma_mask = &mmc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc0_data,
- },
- .resource = mmc0_resources,
- .num_resources = ARRAY_SIZE(mmc0_resources),
-};
-
-static struct resource mmc1_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_MCI1,
- .end = AT91SAM9263_BASE_MCI1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI1,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_MCI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_mmc1_device = {
- .name = "atmel_mci",
- .id = 1,
- .dev = {
- .dma_mask = &mmc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc1_data,
- },
- .resource = mmc1_resources,
- .num_resources = ARRAY_SIZE(mmc1_resources),
-};
-
-void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
-{
- unsigned int i;
- unsigned int slot_count = 0;
-
- if (!data)
- return;
-
- for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
-
- if (!data->slot[i].bus_width)
- continue;
-
- /* input/irq */
- if (gpio_is_valid(data->slot[i].detect_pin)) {
- at91_set_gpio_input(data->slot[i].detect_pin,
- 1);
- at91_set_deglitch(data->slot[i].detect_pin,
- 1);
- }
- if (gpio_is_valid(data->slot[i].wp_pin))
- at91_set_gpio_input(data->slot[i].wp_pin, 1);
-
- if (mmc_id == 0) { /* MCI0 */
- switch (i) {
- case 0: /* slot A */
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA1, 1);
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA0, 1);
- if (data->slot[i].bus_width == 4) {
- at91_set_A_periph(AT91_PIN_PA3, 1);
- at91_set_A_periph(AT91_PIN_PA4, 1);
- at91_set_A_periph(AT91_PIN_PA5, 1);
- }
- slot_count++;
- break;
- case 1: /* slot B */
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA16, 1);
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA17, 1);
- if (data->slot[i].bus_width == 4) {
- at91_set_A_periph(AT91_PIN_PA18, 1);
- at91_set_A_periph(AT91_PIN_PA19, 1);
- at91_set_A_periph(AT91_PIN_PA20, 1);
- }
- slot_count++;
- break;
- default:
- printk(KERN_ERR
- "AT91: SD/MMC slot %d not available\n", i);
- break;
- }
- if (slot_count) {
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA12, 0);
-
- mmc0_data = *data;
- platform_device_register(&at91sam9263_mmc0_device);
- }
- } else if (mmc_id == 1) { /* MCI1 */
- switch (i) {
- case 0: /* slot A */
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA7, 1);
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA8, 1);
- if (data->slot[i].bus_width == 4) {
- at91_set_A_periph(AT91_PIN_PA9, 1);
- at91_set_A_periph(AT91_PIN_PA10, 1);
- at91_set_A_periph(AT91_PIN_PA11, 1);
- }
- slot_count++;
- break;
- case 1: /* slot B */
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA21, 1);
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA22, 1);
- if (data->slot[i].bus_width == 4) {
- at91_set_A_periph(AT91_PIN_PA23, 1);
- at91_set_A_periph(AT91_PIN_PA24, 1);
- at91_set_A_periph(AT91_PIN_PA25, 1);
- }
- slot_count++;
- break;
- default:
- printk(KERN_ERR
- "AT91: SD/MMC slot %d not available\n", i);
- break;
- }
- if (slot_count) {
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA6, 0);
-
- mmc1_data = *data;
- platform_device_register(&at91sam9263_mmc1_device);
- }
- }
- }
-}
-#else
-void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
- * Compact Flash (PCMCIA or IDE)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_PATA_AT91) || defined(CONFIG_PATA_AT91_MODULE) || \
- defined(CONFIG_AT91_CF) || defined(CONFIG_AT91_CF_MODULE)
-
-static struct at91_cf_data cf0_data;
-
-static struct resource cf0_resources[] = {
- [0] = {
- .start = AT91_CHIPSELECT_4,
- .end = AT91_CHIPSELECT_4 + SZ_256M - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
- }
-};
-
-static struct platform_device cf0_device = {
- .id = 0,
- .dev = {
- .platform_data = &cf0_data,
- },
- .resource = cf0_resources,
- .num_resources = ARRAY_SIZE(cf0_resources),
-};
-
-static struct at91_cf_data cf1_data;
-
-static struct resource cf1_resources[] = {
- [0] = {
- .start = AT91_CHIPSELECT_5,
- .end = AT91_CHIPSELECT_5 + SZ_256M - 1,
- .flags = IORESOURCE_MEM | IORESOURCE_MEM_8AND16BIT,
- }
-};
-
-static struct platform_device cf1_device = {
- .id = 1,
- .dev = {
- .platform_data = &cf1_data,
- },
- .resource = cf1_resources,
- .num_resources = ARRAY_SIZE(cf1_resources),
-};
-
-void __init at91_add_device_cf(struct at91_cf_data *data)
-{
- unsigned long ebi0_csa;
- struct platform_device *pdev;
-
- if (!data)
- return;
-
- /*
- * assign CS4 or CS5 to SMC with Compact Flash logic support,
- * we assume SMC timings are configured by board code,
- * except True IDE where timings are controlled by driver
- */
- ebi0_csa = at91_matrix_read(AT91_MATRIX_EBI0CSA);
- switch (data->chipselect) {
- case 4:
- at91_set_A_periph(AT91_PIN_PD6, 0); /* EBI0_NCS4/CFCS0 */
- ebi0_csa |= AT91_MATRIX_EBI0_CS4A_SMC_CF1;
- cf0_data = *data;
- pdev = &cf0_device;
- break;
- case 5:
- at91_set_A_periph(AT91_PIN_PD7, 0); /* EBI0_NCS5/CFCS1 */
- ebi0_csa |= AT91_MATRIX_EBI0_CS5A_SMC_CF2;
- cf1_data = *data;
- pdev = &cf1_device;
- break;
- default:
- printk(KERN_ERR "AT91 CF: bad chip-select requested (%u)\n",
- data->chipselect);
- return;
- }
- at91_matrix_write(AT91_MATRIX_EBI0CSA, ebi0_csa);
-
- if (gpio_is_valid(data->det_pin)) {
- at91_set_gpio_input(data->det_pin, 1);
- at91_set_deglitch(data->det_pin, 1);
- }
-
- if (gpio_is_valid(data->irq_pin)) {
- at91_set_gpio_input(data->irq_pin, 1);
- at91_set_deglitch(data->irq_pin, 1);
- }
-
- if (gpio_is_valid(data->vcc_pin))
- /* initially off */
- at91_set_gpio_output(data->vcc_pin, 0);
-
- /* enable EBI controlled pins */
- at91_set_A_periph(AT91_PIN_PD5, 1); /* NWAIT */
- at91_set_A_periph(AT91_PIN_PD8, 0); /* CFCE1 */
- at91_set_A_periph(AT91_PIN_PD9, 0); /* CFCE2 */
- at91_set_A_periph(AT91_PIN_PD14, 0); /* CFNRW */
-
- pdev->name = (data->flags & AT91_CF_TRUE_IDE) ? "pata_at91" : "at91_cf";
- platform_device_register(pdev);
-}
-#else
-void __init at91_add_device_cf(struct at91_cf_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
- * NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
-static struct atmel_nand_data nand_data;
-
-#define NAND_BASE AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
- [0] = {
- .start = NAND_BASE,
- .end = NAND_BASE + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9263_BASE_ECC0,
- .end = AT91SAM9263_BASE_ECC0 + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at91sam9263_nand_device = {
- .name = "atmel_nand",
- .id = -1,
- .dev = {
- .platform_data = &nand_data,
- },
- .resource = nand_resources,
- .num_resources = ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct atmel_nand_data *data)
-{
- unsigned long csa;
-
- if (!data)
- return;
-
- csa = at91_matrix_read(AT91_MATRIX_EBI0CSA);
- at91_matrix_write(AT91_MATRIX_EBI0CSA, csa | AT91_MATRIX_EBI0_CS3A_SMC_SMARTMEDIA);
-
- /* enable pin */
- if (gpio_is_valid(data->enable_pin))
- at91_set_gpio_output(data->enable_pin, 1);
-
- /* ready/busy pin */
- if (gpio_is_valid(data->rdy_pin))
- at91_set_gpio_input(data->rdy_pin, 1);
-
- /* card detect pin */
- if (gpio_is_valid(data->det_pin))
- at91_set_gpio_input(data->det_pin, 1);
-
- nand_data = *data;
- platform_device_register(&at91sam9263_nand_device);
-}
-#else
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * TWI (i2c)
- * -------------------------------------------------------------------- */
-
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
- .sda_pin = AT91_PIN_PB4,
- .sda_is_open_drain = 1,
- .scl_pin = AT91_PIN_PB5,
- .scl_is_open_drain = 1,
- .udelay = 2, /* ~100 kHz */
-};
-
-static struct platform_device at91sam9263_twi_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev.platform_data = &pdata,
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- at91_set_GPIO_periph(AT91_PIN_PB4, 1); /* TWD (SDA) */
- at91_set_multi_drive(AT91_PIN_PB4, 1);
-
- at91_set_GPIO_periph(AT91_PIN_PB5, 1); /* TWCK (SCL) */
- at91_set_multi_drive(AT91_PIN_PB5, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91sam9263_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_TWI,
- .end = AT91SAM9263_BASE_TWI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_TWI,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_TWI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_twi_device = {
- .name = "i2c-at91sam9260",
- .id = 0,
- .resource = twi_resources,
- .num_resources = ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- /* pins used for TWI interface */
- at91_set_A_periph(AT91_PIN_PB4, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PB4, 1);
-
- at91_set_A_periph(AT91_PIN_PB5, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PB5, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91sam9263_twi_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-static struct resource spi0_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_SPI0,
- .end = AT91SAM9263_BASE_SPI0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI0,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_spi0_device = {
- .name = "atmel_spi",
- .id = 0,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi0_resources,
- .num_resources = ARRAY_SIZE(spi0_resources),
-};
-
-static const unsigned spi0_standard_cs[4] = { AT91_PIN_PA5, AT91_PIN_PA3, AT91_PIN_PA4, AT91_PIN_PB11 };
-
-static struct resource spi1_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_SPI1,
- .end = AT91SAM9263_BASE_SPI1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI1,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SPI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_spi1_device = {
- .name = "atmel_spi",
- .id = 1,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi1_resources,
- .num_resources = ARRAY_SIZE(spi1_resources),
-};
-
-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB15, AT91_PIN_PB16, AT91_PIN_PB17, AT91_PIN_PB18 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
- int i;
- unsigned long cs_pin;
- short enable_spi0 = 0;
- short enable_spi1 = 0;
-
- /* Choose SPI chip-selects */
- for (i = 0; i < nr_devices; i++) {
- if (devices[i].controller_data)
- cs_pin = (unsigned long) devices[i].controller_data;
- else if (devices[i].bus_num == 0)
- cs_pin = spi0_standard_cs[devices[i].chip_select];
- else
- cs_pin = spi1_standard_cs[devices[i].chip_select];
-
- if (!gpio_is_valid(cs_pin))
- continue;
-
- if (devices[i].bus_num == 0)
- enable_spi0 = 1;
- else
- enable_spi1 = 1;
-
- /* enable chip-select pin */
- at91_set_gpio_output(cs_pin, 1);
-
- /* pass chip-select pin to driver */
- devices[i].controller_data = (void *) cs_pin;
- }
-
- spi_register_board_info(devices, nr_devices);
-
- /* Configure SPI bus(es) */
- if (enable_spi0) {
- at91_set_B_periph(AT91_PIN_PA0, 0); /* SPI0_MISO */
- at91_set_B_periph(AT91_PIN_PA1, 0); /* SPI0_MOSI */
- at91_set_B_periph(AT91_PIN_PA2, 0); /* SPI0_SPCK */
-
- platform_device_register(&at91sam9263_spi0_device);
- }
- if (enable_spi1) {
- at91_set_A_periph(AT91_PIN_PB12, 0); /* SPI1_MISO */
- at91_set_A_periph(AT91_PIN_PB13, 0); /* SPI1_MOSI */
- at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_SPCK */
-
- platform_device_register(&at91sam9263_spi1_device);
- }
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * AC97
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
-static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct ac97c_platform_data ac97_data;
-
-static struct resource ac97_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_AC97C,
- .end = AT91SAM9263_BASE_AC97C + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_AC97C,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_AC97C,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_ac97_device = {
- .name = "atmel_ac97c",
- .id = 0,
- .dev = {
- .dma_mask = &ac97_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &ac97_data,
- },
- .resource = ac97_resources,
- .num_resources = ARRAY_SIZE(ac97_resources),
-};
-
-void __init at91_add_device_ac97(struct ac97c_platform_data *data)
-{
- if (!data)
- return;
-
- at91_set_A_periph(AT91_PIN_PB0, 0); /* AC97FS */
- at91_set_A_periph(AT91_PIN_PB1, 0); /* AC97CK */
- at91_set_A_periph(AT91_PIN_PB2, 0); /* AC97TX */
- at91_set_A_periph(AT91_PIN_PB3, 0); /* AC97RX */
-
- /* reset */
- if (gpio_is_valid(data->reset_pin))
- at91_set_gpio_output(data->reset_pin, 0);
-
- ac97_data = *data;
- platform_device_register(&at91sam9263_ac97_device);
-}
-#else
-void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
- * CAN Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_CAN_AT91) || defined(CONFIG_CAN_AT91_MODULE)
-static struct resource can_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_CAN,
- .end = AT91SAM9263_BASE_CAN + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_CAN,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_CAN,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_can_device = {
- .name = "at91_can",
- .id = -1,
- .resource = can_resources,
- .num_resources = ARRAY_SIZE(can_resources),
-};
-
-void __init at91_add_device_can(struct at91_can_data *data)
-{
- at91_set_A_periph(AT91_PIN_PA13, 0); /* CANTX */
- at91_set_A_periph(AT91_PIN_PA14, 0); /* CANRX */
- at91sam9263_can_device.dev.platform_data = data;
-
- platform_device_register(&at91sam9263_can_device);
-}
-#else
-void __init at91_add_device_can(struct at91_can_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
- * LCD Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_pdata lcdc_data;
-
-static struct resource lcdc_resources[] = {
- [0] = {
- .start = AT91SAM9263_LCDC_BASE,
- .end = AT91SAM9263_LCDC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_LCDC,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_LCDC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91_lcdc_device = {
- .name = "at91sam9263-lcdfb",
- .id = 0,
- .dev = {
- .dma_mask = &lcdc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &lcdc_data,
- },
- .resource = lcdc_resources,
- .num_resources = ARRAY_SIZE(lcdc_resources),
-};
-
-void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data)
-{
- if (!data)
- return;
-
- at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */
- at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */
- at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */
- at91_set_B_periph(AT91_PIN_PB9, 0); /* LCDCC */
- at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDD2 */
- at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDD3 */
- at91_set_A_periph(AT91_PIN_PC8, 0); /* LCDD4 */
- at91_set_A_periph(AT91_PIN_PC9, 0); /* LCDD5 */
- at91_set_A_periph(AT91_PIN_PC10, 0); /* LCDD6 */
- at91_set_A_periph(AT91_PIN_PC11, 0); /* LCDD7 */
- at91_set_A_periph(AT91_PIN_PC14, 0); /* LCDD10 */
- at91_set_A_periph(AT91_PIN_PC15, 0); /* LCDD11 */
- at91_set_A_periph(AT91_PIN_PC16, 0); /* LCDD12 */
- at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD13 */
- at91_set_A_periph(AT91_PIN_PC18, 0); /* LCDD14 */
- at91_set_A_periph(AT91_PIN_PC19, 0); /* LCDD15 */
- at91_set_A_periph(AT91_PIN_PC22, 0); /* LCDD18 */
- at91_set_A_periph(AT91_PIN_PC23, 0); /* LCDD19 */
- at91_set_A_periph(AT91_PIN_PC24, 0); /* LCDD20 */
- at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD21 */
- at91_set_A_periph(AT91_PIN_PC26, 0); /* LCDD22 */
- at91_set_A_periph(AT91_PIN_PC27, 0); /* LCDD23 */
-
- lcdc_data = *data;
- platform_device_register(&at91_lcdc_device);
-}
-#else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Image Sensor Interface
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_VIDEO_AT91_ISI) || defined(CONFIG_VIDEO_AT91_ISI_MODULE)
-
-struct resource isi_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_ISI,
- .end = AT91SAM9263_BASE_ISI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_ISI,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_ISI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_isi_device = {
- .name = "at91_isi",
- .id = -1,
- .resource = isi_resources,
- .num_resources = ARRAY_SIZE(isi_resources),
-};
-
-void __init at91_add_device_isi(struct isi_platform_data *data,
- bool use_pck_as_mck)
-{
- at91_set_A_periph(AT91_PIN_PE0, 0); /* ISI_D0 */
- at91_set_A_periph(AT91_PIN_PE1, 0); /* ISI_D1 */
- at91_set_A_periph(AT91_PIN_PE2, 0); /* ISI_D2 */
- at91_set_A_periph(AT91_PIN_PE3, 0); /* ISI_D3 */
- at91_set_A_periph(AT91_PIN_PE4, 0); /* ISI_D4 */
- at91_set_A_periph(AT91_PIN_PE5, 0); /* ISI_D5 */
- at91_set_A_periph(AT91_PIN_PE6, 0); /* ISI_D6 */
- at91_set_A_periph(AT91_PIN_PE7, 0); /* ISI_D7 */
- at91_set_A_periph(AT91_PIN_PE8, 0); /* ISI_PCK */
- at91_set_A_periph(AT91_PIN_PE9, 0); /* ISI_HSYNC */
- at91_set_A_periph(AT91_PIN_PE10, 0); /* ISI_VSYNC */
- at91_set_B_periph(AT91_PIN_PE12, 0); /* ISI_PD8 */
- at91_set_B_periph(AT91_PIN_PE13, 0); /* ISI_PD9 */
- at91_set_B_periph(AT91_PIN_PE14, 0); /* ISI_PD10 */
- at91_set_B_periph(AT91_PIN_PE15, 0); /* ISI_PD11 */
-
- if (use_pck_as_mck) {
- at91_set_B_periph(AT91_PIN_PE11, 0); /* ISI_MCK (PCK3) */
-
- /* TODO: register the PCK for ISI_MCK and set its parent */
- }
-}
-#else
-void __init at91_add_device_isi(struct isi_platform_data *data,
- bool use_pck_as_mck) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Timer/Counter block
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_ATMEL_TCLIB
-
-static struct resource tcb_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_TCB0,
- .end = AT91SAM9263_BASE_TCB0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_TCB,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_TCB,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_tcb_device = {
- .name = "atmel_tcb",
- .id = 0,
- .resource = tcb_resources,
- .num_resources = ARRAY_SIZE(tcb_resources),
-};
-
-#if defined(CONFIG_OF)
-static struct of_device_id tcb_ids[] = {
- { .compatible = "atmel,at91rm9200-tcb" },
- { /*sentinel*/ }
-};
-#endif
-
-static void __init at91_add_device_tc(void)
-{
-#if defined(CONFIG_OF)
- struct device_node *np;
-
- np = of_find_matching_node(NULL, tcb_ids);
- if (np) {
- of_node_put(np);
- return;
- }
-#endif
-
- platform_device_register(&at91sam9263_tcb_device);
-}
-#else
-static void __init at91_add_device_tc(void) { }
-#endif
-
-
-/* --------------------------------------------------------------------
- * RTT
- * -------------------------------------------------------------------- */
-
-static struct resource rtt0_resources[] = {
- {
- .start = AT91SAM9263_BASE_RTT0,
- .end = AT91SAM9263_BASE_RTT0 + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .flags = IORESOURCE_MEM,
- }, {
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device at91sam9263_rtt0_device = {
- .name = "at91_rtt",
- .id = 0,
- .resource = rtt0_resources,
-};
-
-static struct resource rtt1_resources[] = {
- {
- .start = AT91SAM9263_BASE_RTT1,
- .end = AT91SAM9263_BASE_RTT1 + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .flags = IORESOURCE_MEM,
- }, {
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device at91sam9263_rtt1_device = {
- .name = "at91_rtt",
- .id = 1,
- .resource = rtt1_resources,
-};
-
-#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
-static void __init at91_add_device_rtt_rtc(void)
-{
- struct platform_device *pdev;
- struct resource *r;
-
- switch (CONFIG_RTC_DRV_AT91SAM9_RTT) {
- case 0:
- /*
- * The second resource is needed only for the chosen RTT:
- * GPBR will serve as the storage for RTC time offset
- */
- at91sam9263_rtt0_device.num_resources = 3;
- at91sam9263_rtt1_device.num_resources = 1;
- pdev = &at91sam9263_rtt0_device;
- r = rtt0_resources;
- break;
- case 1:
- at91sam9263_rtt0_device.num_resources = 1;
- at91sam9263_rtt1_device.num_resources = 3;
- pdev = &at91sam9263_rtt1_device;
- r = rtt1_resources;
- break;
- default:
- pr_err("at91sam9263: only supports 2 RTT (%d)\n",
- CONFIG_RTC_DRV_AT91SAM9_RTT);
- return;
- }
-
- pdev->name = "rtc-at91sam9";
- r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
- r[1].end = r[1].start + 3;
- r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
- r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
-}
-#else
-static void __init at91_add_device_rtt_rtc(void)
-{
- /* Only one resource is needed: RTT not used as RTC */
- at91sam9263_rtt0_device.num_resources = 1;
- at91sam9263_rtt1_device.num_resources = 1;
-}
-#endif
-
-static void __init at91_add_device_rtt(void)
-{
- at91_add_device_rtt_rtc();
- platform_device_register(&at91sam9263_rtt0_device);
- platform_device_register(&at91sam9263_rtt1_device);
-}
-
-
-/* --------------------------------------------------------------------
- * Watchdog
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
-static struct resource wdt_resources[] = {
- {
- .start = AT91SAM9263_BASE_WDT,
- .end = AT91SAM9263_BASE_WDT + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at91sam9263_wdt_device = {
- .name = "at91_wdt",
- .id = -1,
- .resource = wdt_resources,
- .num_resources = ARRAY_SIZE(wdt_resources),
-};
-
-static void __init at91_add_device_watchdog(void)
-{
- platform_device_register(&at91sam9263_wdt_device);
-}
-#else
-static void __init at91_add_device_watchdog(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * PWM
- * --------------------------------------------------------------------*/
-
-#if IS_ENABLED(CONFIG_PWM_ATMEL)
-static struct resource pwm_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_PWMC,
- .end = AT91SAM9263_BASE_PWMC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_PWMC,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_PWMC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_pwm0_device = {
- .name = "at91sam9rl-pwm",
- .id = -1,
- .resource = pwm_resources,
- .num_resources = ARRAY_SIZE(pwm_resources),
-};
-
-void __init at91_add_device_pwm(u32 mask)
-{
- if (mask & (1 << AT91_PWM0))
- at91_set_B_periph(AT91_PIN_PB7, 1); /* enable PWM0 */
-
- if (mask & (1 << AT91_PWM1))
- at91_set_B_periph(AT91_PIN_PB8, 1); /* enable PWM1 */
-
- if (mask & (1 << AT91_PWM2))
- at91_set_B_periph(AT91_PIN_PC29, 1); /* enable PWM2 */
-
- if (mask & (1 << AT91_PWM3))
- at91_set_B_periph(AT91_PIN_PB29, 1); /* enable PWM3 */
-
- platform_device_register(&at91sam9263_pwm0_device);
-}
-#else
-void __init at91_add_device_pwm(u32 mask) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * SSC -- Synchronous Serial Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
-static u64 ssc0_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc0_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_SSC0,
- .end = AT91SAM9263_BASE_SSC0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC0,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_ssc0_device = {
- .name = "at91rm9200_ssc",
- .id = 0,
- .dev = {
- .dma_mask = &ssc0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ssc0_resources,
- .num_resources = ARRAY_SIZE(ssc0_resources),
-};
-
-static inline void configure_ssc0_pins(unsigned pins)
-{
- if (pins & ATMEL_SSC_TF)
- at91_set_B_periph(AT91_PIN_PB0, 1);
- if (pins & ATMEL_SSC_TK)
- at91_set_B_periph(AT91_PIN_PB1, 1);
- if (pins & ATMEL_SSC_TD)
- at91_set_B_periph(AT91_PIN_PB2, 1);
- if (pins & ATMEL_SSC_RD)
- at91_set_B_periph(AT91_PIN_PB3, 1);
- if (pins & ATMEL_SSC_RK)
- at91_set_B_periph(AT91_PIN_PB4, 1);
- if (pins & ATMEL_SSC_RF)
- at91_set_B_periph(AT91_PIN_PB5, 1);
-}
-
-static u64 ssc1_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc1_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_SSC1,
- .end = AT91SAM9263_BASE_SSC1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC1,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_SSC1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9263_ssc1_device = {
- .name = "at91rm9200_ssc",
- .id = 1,
- .dev = {
- .dma_mask = &ssc1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ssc1_resources,
- .num_resources = ARRAY_SIZE(ssc1_resources),
-};
-
-static inline void configure_ssc1_pins(unsigned pins)
-{
- if (pins & ATMEL_SSC_TF)
- at91_set_A_periph(AT91_PIN_PB6, 1);
- if (pins & ATMEL_SSC_TK)
- at91_set_A_periph(AT91_PIN_PB7, 1);
- if (pins & ATMEL_SSC_TD)
- at91_set_A_periph(AT91_PIN_PB8, 1);
- if (pins & ATMEL_SSC_RD)
- at91_set_A_periph(AT91_PIN_PB9, 1);
- if (pins & ATMEL_SSC_RK)
- at91_set_A_periph(AT91_PIN_PB10, 1);
- if (pins & ATMEL_SSC_RF)
- at91_set_A_periph(AT91_PIN_PB11, 1);
-}
-
-/*
- * SSC controllers are accessed through library code, instead of any
- * kind of all-singing/all-dancing driver. For example one could be
- * used by a particular I2S audio codec's driver, while another one
- * on the same system might be used by a custom data capture driver.
- */
-void __init at91_add_device_ssc(unsigned id, unsigned pins)
-{
- struct platform_device *pdev;
-
- /*
- * NOTE: caller is responsible for passing information matching
- * "pins" to whatever will be using each particular controller.
- */
- switch (id) {
- case AT91SAM9263_ID_SSC0:
- pdev = &at91sam9263_ssc0_device;
- configure_ssc0_pins(pins);
- break;
- case AT91SAM9263_ID_SSC1:
- pdev = &at91sam9263_ssc1_device;
- configure_ssc1_pins(pins);
- break;
- default:
- return;
- }
-
- platform_device_register(pdev);
-}
-
-#else
-void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SERIAL_ATMEL)
-
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_DBGU,
- .end = AT91SAM9263_BASE_DBGU + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91_ID_SYS,
- .end = NR_IRQS_LEGACY + AT91_ID_SYS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data dbgu_data = {
- .use_dma_tx = 0,
- .use_dma_rx = 0, /* DBGU not capable of receive DMA */
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9263_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
- .dma_mask = &dbgu_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &dbgu_data,
- },
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PC30, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PC31, 1); /* DTXD */
-}
-
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_US0,
- .end = AT91SAM9263_BASE_US0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US0,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart0_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9263_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
- .dma_mask = &uart0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart0_data,
- },
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PA26, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PA27, 0); /* RXD0 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PA28, 0); /* RTS0 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PA29, 0); /* CTS0 */
-}
-
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_US1,
- .end = AT91SAM9263_BASE_US1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US1,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart1_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9263_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
- .dma_mask = &uart1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart1_data,
- },
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PD0, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PD1, 0); /* RXD1 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PD7, 0); /* RTS1 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PD8, 0); /* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT91SAM9263_BASE_US2,
- .end = AT91SAM9263_BASE_US2 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9263_ID_US2,
- .end = NR_IRQS_LEGACY + AT91SAM9263_ID_US2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart2_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9263_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
- .dma_mask = &uart2_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart2_data,
- },
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PD2, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PD3, 0); /* RXD2 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PD5, 0); /* RTS2 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
- struct platform_device *pdev;
- struct atmel_uart_data *pdata;
-
- switch (id) {
- case 0: /* DBGU */
- pdev = &at91sam9263_dbgu_device;
- configure_dbgu_pins();
- break;
- case AT91SAM9263_ID_US0:
- pdev = &at91sam9263_uart0_device;
- configure_usart0_pins(pins);
- break;
- case AT91SAM9263_ID_US1:
- pdev = &at91sam9263_uart1_device;
- configure_usart1_pins(pins);
- break;
- case AT91SAM9263_ID_US2:
- pdev = &at91sam9263_uart2_device;
- configure_usart2_pins(pins);
- break;
- default:
- return;
- }
- pdata = pdev->dev.platform_data;
- pdata->num = portnr; /* update to mapped ID */
-
- if (portnr < ATMEL_MAX_UART)
- at91_uarts[portnr] = pdev;
-}
-
-void __init at91_add_device_serial(void)
-{
- int i;
-
- for (i = 0; i < ATMEL_MAX_UART; i++) {
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-}
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-
-/* -------------------------------------------------------------------- */
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
- if (of_have_populated_dt())
- return 0;
-
- at91_add_device_rtt();
- at91_add_device_watchdog();
- at91_add_device_tc();
- return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
*
*/
-#include <linux/module.h>
-#include <linux/dma-mapping.h>
-#include <linux/clk/at91_pmc.h>
-#include <linux/platform_device.h>
-
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
#include <asm/system_misc.h>
-#include <mach/at91sam9g45.h>
-#include <mach/cpu.h>
+#include <asm/irq.h>
#include <mach/hardware.h>
-#include "at91_aic.h"
#include "soc.h"
#include "generic.h"
-#include "sam9_smc.h"
-#include "pm.h"
-
-#if defined(CONFIG_OLD_CLK_AT91)
-#include "clock.h"
-/* --------------------------------------------------------------------
- * Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioA_clk = {
- .name = "pioA_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_PIOA,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
- .name = "pioB_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_PIOB,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioC_clk = {
- .name = "pioC_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_PIOC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioDE_clk = {
- .name = "pioDE_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_PIODE,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk trng_clk = {
- .name = "trng_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_TRNG,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
- .name = "usart0_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_US0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
- .name = "usart1_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_US1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
- .name = "usart2_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_US2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart3_clk = {
- .name = "usart3_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_US3,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc0_clk = {
- .name = "mci0_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_MCI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi0_clk = {
- .name = "twi0_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_TWI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi1_clk = {
- .name = "twi1_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_TWI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
- .name = "spi0_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_SPI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
- .name = "spi1_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_SPI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc0_clk = {
- .name = "ssc0_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_SSC0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc1_clk = {
- .name = "ssc1_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_SSC1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tcb0_clk = {
- .name = "tcb0_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_TCB,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pwm_clk = {
- .name = "pwm_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_PWMC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tsc_clk = {
- .name = "tsc_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_TSC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk dma_clk = {
- .name = "dma_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_DMA,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk uhphs_clk = {
- .name = "uhphs_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_UHPHS,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk lcdc_clk = {
- .name = "lcdc_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_LCDC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ac97_clk = {
- .name = "ac97_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_AC97C,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk macb_clk = {
- .name = "pclk",
- .pmc_mask = 1 << AT91SAM9G45_ID_EMAC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk isi_clk = {
- .name = "isi_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_ISI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk udphs_clk = {
- .name = "udphs_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_UDPHS,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc1_clk = {
- .name = "mci1_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_MCI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-
-/* Video decoder clock - Only for sam9m10/sam9m11 */
-static struct clk vdec_clk = {
- .name = "vdec_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_VDEC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk adc_op_clk = {
- .name = "adc_op_clk",
- .type = CLK_TYPE_PERIPHERAL,
- .rate_hz = 300000,
-};
-
-/* AES/TDES/SHA clock - Only for sam9m11/sam9g56 */
-static struct clk aestdessha_clk = {
- .name = "aestdessha_clk",
- .pmc_mask = 1 << AT91SAM9G45_ID_AESTDESSHA,
- .type = CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
- &pioA_clk,
- &pioB_clk,
- &pioC_clk,
- &pioDE_clk,
- &trng_clk,
- &usart0_clk,
- &usart1_clk,
- &usart2_clk,
- &usart3_clk,
- &mmc0_clk,
- &twi0_clk,
- &twi1_clk,
- &spi0_clk,
- &spi1_clk,
- &ssc0_clk,
- &ssc1_clk,
- &tcb0_clk,
- &pwm_clk,
- &tsc_clk,
- &dma_clk,
- &uhphs_clk,
- &lcdc_clk,
- &ac97_clk,
- &macb_clk,
- &isi_clk,
- &udphs_clk,
- &mmc1_clk,
- &adc_op_clk,
- &aestdessha_clk,
- // irq0
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
- /* One additional fake clock for macb_hclk */
- CLKDEV_CON_ID("hclk", &macb_clk),
- /* One additional fake clock for ohci */
- CLKDEV_CON_ID("ohci_clk", &uhphs_clk),
- CLKDEV_CON_DEV_ID("hclk", "at91sam9g45-lcdfb.0", &lcdc_clk),
- CLKDEV_CON_DEV_ID("hclk", "at91sam9g45es-lcdfb.0", &lcdc_clk),
- CLKDEV_CON_DEV_ID("ehci_clk", "atmel-ehci", &uhphs_clk),
- CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
- CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.0", &mmc0_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "atmel_mci.1", &mmc1_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.0", &spi0_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "atmel_spi.1", &spi1_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tcb0_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.1", &tcb0_clk),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.0", &twi0_clk),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g10.1", &twi1_clk),
- CLKDEV_CON_DEV_ID("pclk", "at91sam9g45_ssc.0", &ssc0_clk),
- CLKDEV_CON_DEV_ID("pclk", "at91sam9g45_ssc.1", &ssc1_clk),
- CLKDEV_CON_DEV_ID("pclk", "fff9c000.ssc", &ssc0_clk),
- CLKDEV_CON_DEV_ID("pclk", "fffa0000.ssc", &ssc1_clk),
- CLKDEV_CON_DEV_ID(NULL, "atmel-trng", &trng_clk),
- CLKDEV_CON_DEV_ID(NULL, "atmel_sha", &aestdessha_clk),
- CLKDEV_CON_DEV_ID(NULL, "atmel_tdes", &aestdessha_clk),
- CLKDEV_CON_DEV_ID(NULL, "atmel_aes", &aestdessha_clk),
- CLKDEV_CON_DEV_ID(NULL, "at91sam9rl-pwm", &pwm_clk),
- /* more usart lookup table for DT entries */
- CLKDEV_CON_DEV_ID("usart", "ffffee00.serial", &mck),
- CLKDEV_CON_DEV_ID("usart", "fff8c000.serial", &usart0_clk),
- CLKDEV_CON_DEV_ID("usart", "fff90000.serial", &usart1_clk),
- CLKDEV_CON_DEV_ID("usart", "fff94000.serial", &usart2_clk),
- CLKDEV_CON_DEV_ID("usart", "fff98000.serial", &usart3_clk),
- /* more tc lookup table for DT entries */
- CLKDEV_CON_DEV_ID("t0_clk", "fff7c000.timer", &tcb0_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "fffd4000.timer", &tcb0_clk),
- CLKDEV_CON_DEV_ID("hclk", "700000.ohci", &uhphs_clk),
- CLKDEV_CON_DEV_ID("ehci_clk", "800000.ehci", &uhphs_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "fff80000.mmc", &mmc0_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "fffd0000.mmc", &mmc1_clk),
- CLKDEV_CON_DEV_ID(NULL, "fff84000.i2c", &twi0_clk),
- CLKDEV_CON_DEV_ID(NULL, "fff88000.i2c", &twi1_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "fffa4000.spi", &spi0_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "fffa8000.spi", &spi1_clk),
- CLKDEV_CON_DEV_ID("hclk", "600000.gadget", &utmi_clk),
- CLKDEV_CON_DEV_ID("pclk", "600000.gadget", &udphs_clk),
- /* fake hclk clock */
- CLKDEV_CON_DEV_ID("hclk", "at91_ohci", &uhphs_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff200.gpio", &pioA_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioB_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioC_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioDE_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioDE_clk),
-
- CLKDEV_CON_ID("pioA", &pioA_clk),
- CLKDEV_CON_ID("pioB", &pioB_clk),
- CLKDEV_CON_ID("pioC", &pioC_clk),
- CLKDEV_CON_ID("pioD", &pioDE_clk),
- CLKDEV_CON_ID("pioE", &pioDE_clk),
- /* Fake adc clock */
- CLKDEV_CON_ID("adc_clk", &tsc_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffb8000.pwm", &pwm_clk),
-};
-
-static struct clk_lookup usart_clocks_lookups[] = {
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
-};
-
-/*
- * The two programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
- .name = "pck0",
- .pmc_mask = AT91_PMC_PCK0,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 0,
-};
-static struct clk pck1 = {
- .name = "pck1",
- .pmc_mask = AT91_PMC_PCK1,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 1,
-};
-
-static void __init at91sam9g45_register_clocks(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
- clk_register(periph_clocks[i]);
-
- clkdev_add_table(periph_clocks_lookups,
- ARRAY_SIZE(periph_clocks_lookups));
- clkdev_add_table(usart_clocks_lookups,
- ARRAY_SIZE(usart_clocks_lookups));
-
- if (cpu_is_at91sam9m10() || cpu_is_at91sam9m11())
- clk_register(&vdec_clk);
-
- clk_register(&pck0);
- clk_register(&pck1);
-}
-#else
-#define at91sam9g45_register_clocks NULL
-#endif
-
-/* --------------------------------------------------------------------
- * GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91sam9g45_gpio[] __initdata = {
- {
- .id = AT91SAM9G45_ID_PIOA,
- .regbase = AT91SAM9G45_BASE_PIOA,
- }, {
- .id = AT91SAM9G45_ID_PIOB,
- .regbase = AT91SAM9G45_BASE_PIOB,
- }, {
- .id = AT91SAM9G45_ID_PIOC,
- .regbase = AT91SAM9G45_BASE_PIOC,
- }, {
- .id = AT91SAM9G45_ID_PIODE,
- .regbase = AT91SAM9G45_BASE_PIOD,
- }, {
- .id = AT91SAM9G45_ID_PIODE,
- .regbase = AT91SAM9G45_BASE_PIOE,
- }
-};
/* --------------------------------------------------------------------
* AT91SAM9G45 processor initialization
at91_init_sram(0, AT91SAM9G45_SRAM_BASE, AT91SAM9G45_SRAM_SIZE);
}
-static void __init at91sam9g45_ioremap_registers(void)
-{
- at91_ioremap_ramc(0, AT91SAM9G45_BASE_DDRSDRC1, 512);
- at91_ioremap_ramc(1, AT91SAM9G45_BASE_DDRSDRC0, 512);
- at91sam926x_ioremap_pit(AT91SAM9G45_BASE_PIT);
- at91sam9_ioremap_smc(0, AT91SAM9G45_BASE_SMC);
- at91_ioremap_matrix(AT91SAM9G45_BASE_MATRIX);
- at91_pm_set_standby(at91_ddr_standby);
-}
-
static void __init at91sam9g45_initialize(void)
{
arm_pm_idle = at91sam9_idle;
at91_sysirq_mask_rtc(AT91SAM9G45_BASE_RTC);
at91_sysirq_mask_rtt(AT91SAM9G45_BASE_RTT);
-
- /* Register GPIO subsystem */
- at91_gpio_init(at91sam9g45_gpio, 5);
-}
-
-static struct resource rstc_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_RSTC,
- .end = AT91SAM9G45_BASE_RSTC + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9G45_BASE_DDRSDRC1,
- .end = AT91SAM9G45_BASE_DDRSDRC1 + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = AT91SAM9G45_BASE_DDRSDRC0,
- .end = AT91SAM9G45_BASE_DDRSDRC0 + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device rstc_device = {
- .name = "at91-sam9g45-reset",
- .resource = rstc_resources,
- .num_resources = ARRAY_SIZE(rstc_resources),
-};
-
-static struct resource shdwc_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_SHDWC,
- .end = AT91SAM9G45_BASE_SHDWC + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device shdwc_device = {
- .name = "at91-poweroff",
- .resource = shdwc_resources,
- .num_resources = ARRAY_SIZE(shdwc_resources),
-};
-
-static void __init at91sam9g45_register_devices(void)
-{
- platform_device_register(&rstc_device);
- platform_device_register(&shdwc_device);
-}
-
-/* --------------------------------------------------------------------
- * Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91sam9g45_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller (FIQ) */
- 7, /* System Peripherals */
- 1, /* Parallel IO Controller A */
- 1, /* Parallel IO Controller B */
- 1, /* Parallel IO Controller C */
- 1, /* Parallel IO Controller D and E */
- 0,
- 5, /* USART 0 */
- 5, /* USART 1 */
- 5, /* USART 2 */
- 5, /* USART 3 */
- 0, /* Multimedia Card Interface 0 */
- 6, /* Two-Wire Interface 0 */
- 6, /* Two-Wire Interface 1 */
- 5, /* Serial Peripheral Interface 0 */
- 5, /* Serial Peripheral Interface 1 */
- 4, /* Serial Synchronous Controller 0 */
- 4, /* Serial Synchronous Controller 1 */
- 0, /* Timer Counter 0, 1, 2, 3, 4 and 5 */
- 0, /* Pulse Width Modulation Controller */
- 0, /* Touch Screen Controller */
- 0, /* DMA Controller */
- 2, /* USB Host High Speed port */
- 3, /* LDC Controller */
- 5, /* AC97 Controller */
- 3, /* Ethernet */
- 0, /* Image Sensor Interface */
- 2, /* USB Device High speed port */
- 0, /* AESTDESSHA Crypto HW Accelerators */
- 0, /* Multimedia Card Interface 1 */
- 0,
- 0, /* Advanced Interrupt Controller (IRQ0) */
-};
-
-static void __init at91sam9g45_init_time(void)
-{
- at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS);
}
AT91_SOC_START(at91sam9g45)
.map_io = at91sam9g45_map_io,
- .default_irq_priority = at91sam9g45_default_irq_priority,
- .extern_irq = (1 << AT91SAM9G45_ID_IRQ0),
- .ioremap_registers = at91sam9g45_ioremap_registers,
- .register_clocks = at91sam9g45_register_clocks,
- .register_devices = at91sam9g45_register_devices,
.init = at91sam9g45_initialize,
- .init_time = at91sam9g45_init_time,
AT91_SOC_END
+++ /dev/null
-/*
- * On-Chip devices setup code for the AT91SAM9G45 family
- *
- * Copyright (C) 2009 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-#include <linux/i2c-gpio.h>
-#include <linux/atmel-mci.h>
-#include <linux/platform_data/crypto-atmel.h>
-
-#include <linux/platform_data/at91_adc.h>
-
-#include <linux/fb.h>
-#include <video/atmel_lcdc.h>
-
-#include <mach/at91sam9g45.h>
-#include <mach/at91sam9g45_matrix.h>
-#include <mach/at91_matrix.h>
-#include <mach/at91sam9_smc.h>
-#include <linux/platform_data/dma-atmel.h>
-#include <mach/atmel-mci.h>
-#include <mach/hardware.h>
-
-#include <media/atmel-isi.h>
-
-#include "board.h"
-#include "generic.h"
-#include "clock.h"
-#include "gpio.h"
-
-
-/* --------------------------------------------------------------------
- * HDMAC - AHB DMA Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
-static u64 hdmac_dmamask = DMA_BIT_MASK(32);
-
-static struct resource hdmac_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_DMA,
- .end = AT91SAM9G45_BASE_DMA + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_DMA,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_DMA,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at_hdmac_device = {
- .name = "at91sam9g45_dma",
- .id = -1,
- .dev = {
- .dma_mask = &hdmac_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = hdmac_resources,
- .num_resources = ARRAY_SIZE(hdmac_resources),
-};
-
-void __init at91_add_device_hdmac(void)
-{
- platform_device_register(&at_hdmac_device);
-}
-#else
-void __init at91_add_device_hdmac(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * USB Host (OHCI)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE)
-static u64 ohci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_ohci_data;
-
-static struct resource usbh_ohci_resources[] = {
- [0] = {
- .start = AT91SAM9G45_OHCI_BASE,
- .end = AT91SAM9G45_OHCI_BASE + SZ_1M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91_usbh_ohci_device = {
- .name = "at91_ohci",
- .id = -1,
- .dev = {
- .dma_mask = &ohci_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &usbh_ohci_data,
- },
- .resource = usbh_ohci_resources,
- .num_resources = ARRAY_SIZE(usbh_ohci_resources),
-};
-
-void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data)
-{
- int i;
-
- if (!data)
- return;
-
- /* Enable VBus control for UHP ports */
- for (i = 0; i < data->ports; i++) {
- if (gpio_is_valid(data->vbus_pin[i]))
- at91_set_gpio_output(data->vbus_pin[i],
- data->vbus_pin_active_low[i]);
- }
-
- /* Enable overcurrent notification */
- for (i = 0; i < data->ports; i++) {
- if (gpio_is_valid(data->overcurrent_pin[i]))
- at91_set_gpio_input(data->overcurrent_pin[i], 1);
- }
-
- usbh_ohci_data = *data;
- platform_device_register(&at91_usbh_ohci_device);
-}
-#else
-void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * USB Host HS (EHCI)
- * Needs an OHCI host for low and full speed management
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_EHCI_HCD) || defined(CONFIG_USB_EHCI_HCD_MODULE)
-static u64 ehci_dmamask = DMA_BIT_MASK(32);
-static struct at91_usbh_data usbh_ehci_data;
-
-static struct resource usbh_ehci_resources[] = {
- [0] = {
- .start = AT91SAM9G45_EHCI_BASE,
- .end = AT91SAM9G45_EHCI_BASE + SZ_1M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_UHPHS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91_usbh_ehci_device = {
- .name = "atmel-ehci",
- .id = -1,
- .dev = {
- .dma_mask = &ehci_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &usbh_ehci_data,
- },
- .resource = usbh_ehci_resources,
- .num_resources = ARRAY_SIZE(usbh_ehci_resources),
-};
-
-void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data)
-{
- int i;
-
- if (!data)
- return;
-
- /* Enable VBus control for UHP ports */
- for (i = 0; i < data->ports; i++) {
- if (gpio_is_valid(data->vbus_pin[i]))
- at91_set_gpio_output(data->vbus_pin[i],
- data->vbus_pin_active_low[i]);
- }
-
- usbh_ehci_data = *data;
- platform_device_register(&at91_usbh_ehci_device);
-}
-#else
-void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * USB HS Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
-static struct resource usba_udc_resources[] = {
- [0] = {
- .start = AT91SAM9G45_UDPHS_FIFO,
- .end = AT91SAM9G45_UDPHS_FIFO + SZ_512K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9G45_BASE_UDPHS,
- .end = AT91SAM9G45_BASE_UDPHS + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_UDPHS,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_UDPHS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
- [idx] = { \
- .name = nam, \
- .index = idx, \
- .fifo_size = maxpkt, \
- .nr_banks = maxbk, \
- .can_dma = dma, \
- .can_isoc = isoc, \
- }
-
-static struct usba_ep_data usba_udc_ep[] __initdata = {
- EP("ep0", 0, 64, 1, 0, 0),
- EP("ep1", 1, 1024, 2, 1, 1),
- EP("ep2", 2, 1024, 2, 1, 1),
- EP("ep3", 3, 1024, 3, 1, 0),
- EP("ep4", 4, 1024, 3, 1, 0),
- EP("ep5", 5, 1024, 3, 1, 1),
- EP("ep6", 6, 1024, 3, 1, 1),
-};
-
-#undef EP
-
-/*
- * pdata doesn't have room for any endpoints, so we need to
- * append room for the ones we need right after it.
- */
-static struct {
- struct usba_platform_data pdata;
- struct usba_ep_data ep[7];
-} usba_udc_data;
-
-static struct platform_device at91_usba_udc_device = {
- .name = "atmel_usba_udc",
- .id = -1,
- .dev = {
- .platform_data = &usba_udc_data.pdata,
- },
- .resource = usba_udc_resources,
- .num_resources = ARRAY_SIZE(usba_udc_resources),
-};
-
-void __init at91_add_device_usba(struct usba_platform_data *data)
-{
- usba_udc_data.pdata.vbus_pin = -EINVAL;
- usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
- memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
-
- if (data && gpio_is_valid(data->vbus_pin)) {
- at91_set_gpio_input(data->vbus_pin, 0);
- at91_set_deglitch(data->vbus_pin, 1);
- usba_udc_data.pdata.vbus_pin = data->vbus_pin;
- }
-
- /* Pullup pin is handled internally by USB device peripheral */
-
- platform_device_register(&at91_usba_udc_device);
-}
-#else
-void __init at91_add_device_usba(struct usba_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Ethernet
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MACB) || defined(CONFIG_MACB_MODULE)
-static u64 eth_dmamask = DMA_BIT_MASK(32);
-static struct macb_platform_data eth_data;
-
-static struct resource eth_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_EMAC,
- .end = AT91SAM9G45_BASE_EMAC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_EMAC,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_EMAC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9g45_eth_device = {
- .name = "macb",
- .id = -1,
- .dev = {
- .dma_mask = ð_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = ð_data,
- },
- .resource = eth_resources,
- .num_resources = ARRAY_SIZE(eth_resources),
-};
-
-void __init at91_add_device_eth(struct macb_platform_data *data)
-{
- if (!data)
- return;
-
- if (gpio_is_valid(data->phy_irq_pin)) {
- at91_set_gpio_input(data->phy_irq_pin, 0);
- at91_set_deglitch(data->phy_irq_pin, 1);
- }
-
- /* Pins used for MII and RMII */
- at91_set_A_periph(AT91_PIN_PA17, 0); /* ETXCK_EREFCK */
- at91_set_A_periph(AT91_PIN_PA15, 0); /* ERXDV */
- at91_set_A_periph(AT91_PIN_PA12, 0); /* ERX0 */
- at91_set_A_periph(AT91_PIN_PA13, 0); /* ERX1 */
- at91_set_A_periph(AT91_PIN_PA16, 0); /* ERXER */
- at91_set_A_periph(AT91_PIN_PA14, 0); /* ETXEN */
- at91_set_A_periph(AT91_PIN_PA10, 0); /* ETX0 */
- at91_set_A_periph(AT91_PIN_PA11, 0); /* ETX1 */
- at91_set_A_periph(AT91_PIN_PA19, 0); /* EMDIO */
- at91_set_A_periph(AT91_PIN_PA18, 0); /* EMDC */
-
- if (!data->is_rmii) {
- at91_set_B_periph(AT91_PIN_PA29, 0); /* ECRS */
- at91_set_B_periph(AT91_PIN_PA30, 0); /* ECOL */
- at91_set_B_periph(AT91_PIN_PA8, 0); /* ERX2 */
- at91_set_B_periph(AT91_PIN_PA9, 0); /* ERX3 */
- at91_set_B_periph(AT91_PIN_PA28, 0); /* ERXCK */
- at91_set_B_periph(AT91_PIN_PA6, 0); /* ETX2 */
- at91_set_B_periph(AT91_PIN_PA7, 0); /* ETX3 */
- at91_set_B_periph(AT91_PIN_PA27, 0); /* ETXER */
- }
-
- eth_data = *data;
- platform_device_register(&at91sam9g45_eth_device);
-}
-#else
-void __init at91_add_device_eth(struct macb_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * MMC / SD
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MMC_ATMELMCI) || defined(CONFIG_MMC_ATMELMCI_MODULE)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct mci_platform_data mmc0_data, mmc1_data;
-
-static struct resource mmc0_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_MCI0,
- .end = AT91SAM9G45_BASE_MCI0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI0,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9g45_mmc0_device = {
- .name = "atmel_mci",
- .id = 0,
- .dev = {
- .dma_mask = &mmc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc0_data,
- },
- .resource = mmc0_resources,
- .num_resources = ARRAY_SIZE(mmc0_resources),
-};
-
-static struct resource mmc1_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_MCI1,
- .end = AT91SAM9G45_BASE_MCI1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI1,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_MCI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9g45_mmc1_device = {
- .name = "atmel_mci",
- .id = 1,
- .dev = {
- .dma_mask = &mmc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc1_data,
- },
- .resource = mmc1_resources,
- .num_resources = ARRAY_SIZE(mmc1_resources),
-};
-
-/* Consider only one slot : slot 0 */
-void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
-{
-
- if (!data)
- return;
-
- /* Must have at least one usable slot */
- if (!data->slot[0].bus_width)
- return;
-
-#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
- {
- struct at_dma_slave *atslave;
- struct mci_dma_data *alt_atslave;
-
- alt_atslave = kzalloc(sizeof(struct mci_dma_data), GFP_KERNEL);
- atslave = &alt_atslave->sdata;
-
- /* DMA slave channel configuration */
- atslave->dma_dev = &at_hdmac_device.dev;
- atslave->cfg = ATC_FIFOCFG_HALFFIFO
- | ATC_SRC_H2SEL_HW | ATC_DST_H2SEL_HW;
- if (mmc_id == 0) /* MCI0 */
- atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI0)
- | ATC_DST_PER(AT_DMA_ID_MCI0);
-
- else /* MCI1 */
- atslave->cfg |= ATC_SRC_PER(AT_DMA_ID_MCI1)
- | ATC_DST_PER(AT_DMA_ID_MCI1);
-
- data->dma_slave = alt_atslave;
- }
-#endif
-
-
- /* input/irq */
- if (gpio_is_valid(data->slot[0].detect_pin)) {
- at91_set_gpio_input(data->slot[0].detect_pin, 1);
- at91_set_deglitch(data->slot[0].detect_pin, 1);
- }
- if (gpio_is_valid(data->slot[0].wp_pin))
- at91_set_gpio_input(data->slot[0].wp_pin, 1);
-
- if (mmc_id == 0) { /* MCI0 */
-
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA0, 0);
-
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA1, 1);
-
- /* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */
- at91_set_A_periph(AT91_PIN_PA2, 1);
- if (data->slot[0].bus_width == 4) {
- at91_set_A_periph(AT91_PIN_PA3, 1);
- at91_set_A_periph(AT91_PIN_PA4, 1);
- at91_set_A_periph(AT91_PIN_PA5, 1);
- if (data->slot[0].bus_width == 8) {
- at91_set_A_periph(AT91_PIN_PA6, 1);
- at91_set_A_periph(AT91_PIN_PA7, 1);
- at91_set_A_periph(AT91_PIN_PA8, 1);
- at91_set_A_periph(AT91_PIN_PA9, 1);
- }
- }
-
- mmc0_data = *data;
- platform_device_register(&at91sam9g45_mmc0_device);
-
- } else { /* MCI1 */
-
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA31, 0);
-
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA22, 1);
-
- /* DAT0, maybe DAT1..DAT3 and maybe DAT4..DAT7 */
- at91_set_A_periph(AT91_PIN_PA23, 1);
- if (data->slot[0].bus_width == 4) {
- at91_set_A_periph(AT91_PIN_PA24, 1);
- at91_set_A_periph(AT91_PIN_PA25, 1);
- at91_set_A_periph(AT91_PIN_PA26, 1);
- if (data->slot[0].bus_width == 8) {
- at91_set_A_periph(AT91_PIN_PA27, 1);
- at91_set_A_periph(AT91_PIN_PA28, 1);
- at91_set_A_periph(AT91_PIN_PA29, 1);
- at91_set_A_periph(AT91_PIN_PA30, 1);
- }
- }
-
- mmc1_data = *data;
- platform_device_register(&at91sam9g45_mmc1_device);
-
- }
-}
-#else
-void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
-static struct atmel_nand_data nand_data;
-
-#define NAND_BASE AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
- [0] = {
- .start = NAND_BASE,
- .end = NAND_BASE + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9G45_BASE_ECC,
- .end = AT91SAM9G45_BASE_ECC + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at91sam9g45_nand_device = {
- .name = "atmel_nand",
- .id = -1,
- .dev = {
- .platform_data = &nand_data,
- },
- .resource = nand_resources,
- .num_resources = ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct atmel_nand_data *data)
-{
- unsigned long csa;
-
- if (!data)
- return;
-
- csa = at91_matrix_read(AT91_MATRIX_EBICSA);
- at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_EBI_CS3A_SMC_SMARTMEDIA);
-
- /* enable pin */
- if (gpio_is_valid(data->enable_pin))
- at91_set_gpio_output(data->enable_pin, 1);
-
- /* ready/busy pin */
- if (gpio_is_valid(data->rdy_pin))
- at91_set_gpio_input(data->rdy_pin, 1);
-
- /* card detect pin */
- if (gpio_is_valid(data->det_pin))
- at91_set_gpio_input(data->det_pin, 1);
-
- nand_data = *data;
- platform_device_register(&at91sam9g45_nand_device);
-}
-#else
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * TWI (i2c)
- * -------------------------------------------------------------------- */
-
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-static struct i2c_gpio_platform_data pdata_i2c0 = {
- .sda_pin = AT91_PIN_PA20,
- .sda_is_open_drain = 1,
- .scl_pin = AT91_PIN_PA21,
- .scl_is_open_drain = 1,
- .udelay = 5, /* ~100 kHz */
-};
-
-static struct platform_device at91sam9g45_twi0_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev.platform_data = &pdata_i2c0,
-};
-
-static struct i2c_gpio_platform_data pdata_i2c1 = {
- .sda_pin = AT91_PIN_PB10,
- .sda_is_open_drain = 1,
- .scl_pin = AT91_PIN_PB11,
- .scl_is_open_drain = 1,
- .udelay = 5, /* ~100 kHz */
-};
-
-static struct platform_device at91sam9g45_twi1_device = {
- .name = "i2c-gpio",
- .id = 1,
- .dev.platform_data = &pdata_i2c1,
-};
-
-void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
-{
- i2c_register_board_info(i2c_id, devices, nr_devices);
-
- if (i2c_id == 0) {
- at91_set_GPIO_periph(AT91_PIN_PA20, 1); /* TWD (SDA) */
- at91_set_multi_drive(AT91_PIN_PA20, 1);
-
- at91_set_GPIO_periph(AT91_PIN_PA21, 1); /* TWCK (SCL) */
- at91_set_multi_drive(AT91_PIN_PA21, 1);
-
- platform_device_register(&at91sam9g45_twi0_device);
- } else {
- at91_set_GPIO_periph(AT91_PIN_PB10, 1); /* TWD (SDA) */
- at91_set_multi_drive(AT91_PIN_PB10, 1);
-
- at91_set_GPIO_periph(AT91_PIN_PB11, 1); /* TWCK (SCL) */
- at91_set_multi_drive(AT91_PIN_PB11, 1);
-
- platform_device_register(&at91sam9g45_twi1_device);
- }
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-static struct resource twi0_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_TWI0,
- .end = AT91SAM9G45_BASE_TWI0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI0,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9g45_twi0_device = {
- .name = "i2c-at91sam9g10",
- .id = 0,
- .resource = twi0_resources,
- .num_resources = ARRAY_SIZE(twi0_resources),
-};
-
-static struct resource twi1_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_TWI1,
- .end = AT91SAM9G45_BASE_TWI1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI1,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TWI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9g45_twi1_device = {
- .name = "i2c-at91sam9g10",
- .id = 1,
- .resource = twi1_resources,
- .num_resources = ARRAY_SIZE(twi1_resources),
-};
-
-void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices)
-{
- i2c_register_board_info(i2c_id, devices, nr_devices);
-
- /* pins used for TWI interface */
- if (i2c_id == 0) {
- at91_set_A_periph(AT91_PIN_PA20, 0); /* TWD */
- at91_set_A_periph(AT91_PIN_PA21, 0); /* TWCK */
-
- platform_device_register(&at91sam9g45_twi0_device);
- } else {
- at91_set_A_periph(AT91_PIN_PB10, 0); /* TWD */
- at91_set_A_periph(AT91_PIN_PB11, 0); /* TWCK */
-
- platform_device_register(&at91sam9g45_twi1_device);
- }
-}
-#else
-void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-static struct resource spi0_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_SPI0,
- .end = AT91SAM9G45_BASE_SPI0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI0,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9g45_spi0_device = {
- .name = "atmel_spi",
- .id = 0,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi0_resources,
- .num_resources = ARRAY_SIZE(spi0_resources),
-};
-
-static const unsigned spi0_standard_cs[4] = { AT91_PIN_PB3, AT91_PIN_PB18, AT91_PIN_PB19, AT91_PIN_PD27 };
-
-static struct resource spi1_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_SPI1,
- .end = AT91SAM9G45_BASE_SPI1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI1,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SPI1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9g45_spi1_device = {
- .name = "atmel_spi",
- .id = 1,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi1_resources,
- .num_resources = ARRAY_SIZE(spi1_resources),
-};
-
-static const unsigned spi1_standard_cs[4] = { AT91_PIN_PB17, AT91_PIN_PD28, AT91_PIN_PD18, AT91_PIN_PD19 };
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
- int i;
- unsigned long cs_pin;
- short enable_spi0 = 0;
- short enable_spi1 = 0;
-
- /* Choose SPI chip-selects */
- for (i = 0; i < nr_devices; i++) {
- if (devices[i].controller_data)
- cs_pin = (unsigned long) devices[i].controller_data;
- else if (devices[i].bus_num == 0)
- cs_pin = spi0_standard_cs[devices[i].chip_select];
- else
- cs_pin = spi1_standard_cs[devices[i].chip_select];
-
- if (!gpio_is_valid(cs_pin))
- continue;
-
- if (devices[i].bus_num == 0)
- enable_spi0 = 1;
- else
- enable_spi1 = 1;
-
- /* enable chip-select pin */
- at91_set_gpio_output(cs_pin, 1);
-
- /* pass chip-select pin to driver */
- devices[i].controller_data = (void *) cs_pin;
- }
-
- spi_register_board_info(devices, nr_devices);
-
- /* Configure SPI bus(es) */
- if (enable_spi0) {
- at91_set_A_periph(AT91_PIN_PB0, 0); /* SPI0_MISO */
- at91_set_A_periph(AT91_PIN_PB1, 0); /* SPI0_MOSI */
- at91_set_A_periph(AT91_PIN_PB2, 0); /* SPI0_SPCK */
-
- platform_device_register(&at91sam9g45_spi0_device);
- }
- if (enable_spi1) {
- at91_set_A_periph(AT91_PIN_PB14, 0); /* SPI1_MISO */
- at91_set_A_periph(AT91_PIN_PB15, 0); /* SPI1_MOSI */
- at91_set_A_periph(AT91_PIN_PB16, 0); /* SPI1_SPCK */
-
- platform_device_register(&at91sam9g45_spi1_device);
- }
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * AC97
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
-static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct ac97c_platform_data ac97_data;
-
-static struct resource ac97_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_AC97C,
- .end = AT91SAM9G45_BASE_AC97C + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AC97C,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AC97C,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9g45_ac97_device = {
- .name = "atmel_ac97c",
- .id = 0,
- .dev = {
- .dma_mask = &ac97_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &ac97_data,
- },
- .resource = ac97_resources,
- .num_resources = ARRAY_SIZE(ac97_resources),
-};
-
-void __init at91_add_device_ac97(struct ac97c_platform_data *data)
-{
- if (!data)
- return;
-
- at91_set_A_periph(AT91_PIN_PD8, 0); /* AC97FS */
- at91_set_A_periph(AT91_PIN_PD9, 0); /* AC97CK */
- at91_set_A_periph(AT91_PIN_PD7, 0); /* AC97TX */
- at91_set_A_periph(AT91_PIN_PD6, 0); /* AC97RX */
-
- /* reset */
- if (gpio_is_valid(data->reset_pin))
- at91_set_gpio_output(data->reset_pin, 0);
-
- ac97_data = *data;
- platform_device_register(&at91sam9g45_ac97_device);
-}
-#else
-void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
- * Image Sensor Interface
- * -------------------------------------------------------------------- */
-#if defined(CONFIG_VIDEO_ATMEL_ISI) || defined(CONFIG_VIDEO_ATMEL_ISI_MODULE)
-static u64 isi_dmamask = DMA_BIT_MASK(32);
-static struct isi_platform_data isi_data;
-
-struct resource isi_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_ISI,
- .end = AT91SAM9G45_BASE_ISI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_ISI,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_ISI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9g45_isi_device = {
- .name = "atmel_isi",
- .id = 0,
- .dev = {
- .dma_mask = &isi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &isi_data,
- },
- .resource = isi_resources,
- .num_resources = ARRAY_SIZE(isi_resources),
-};
-
-static struct clk_lookup isi_mck_lookups[] = {
- CLKDEV_CON_DEV_ID("isi_mck", "atmel_isi.0", NULL),
-};
-
-void __init at91_add_device_isi(struct isi_platform_data *data,
- bool use_pck_as_mck)
-{
- struct clk *pck;
- struct clk *parent;
-
- if (!data)
- return;
- isi_data = *data;
-
- at91_set_A_periph(AT91_PIN_PB20, 0); /* ISI_D0 */
- at91_set_A_periph(AT91_PIN_PB21, 0); /* ISI_D1 */
- at91_set_A_periph(AT91_PIN_PB22, 0); /* ISI_D2 */
- at91_set_A_periph(AT91_PIN_PB23, 0); /* ISI_D3 */
- at91_set_A_periph(AT91_PIN_PB24, 0); /* ISI_D4 */
- at91_set_A_periph(AT91_PIN_PB25, 0); /* ISI_D5 */
- at91_set_A_periph(AT91_PIN_PB26, 0); /* ISI_D6 */
- at91_set_A_periph(AT91_PIN_PB27, 0); /* ISI_D7 */
- at91_set_A_periph(AT91_PIN_PB28, 0); /* ISI_PCK */
- at91_set_A_periph(AT91_PIN_PB30, 0); /* ISI_HSYNC */
- at91_set_A_periph(AT91_PIN_PB29, 0); /* ISI_VSYNC */
- at91_set_B_periph(AT91_PIN_PB8, 0); /* ISI_PD8 */
- at91_set_B_periph(AT91_PIN_PB9, 0); /* ISI_PD9 */
- at91_set_B_periph(AT91_PIN_PB10, 0); /* ISI_PD10 */
- at91_set_B_periph(AT91_PIN_PB11, 0); /* ISI_PD11 */
-
- platform_device_register(&at91sam9g45_isi_device);
-
- if (use_pck_as_mck) {
- at91_set_B_periph(AT91_PIN_PB31, 0); /* ISI_MCK (PCK1) */
-
- pck = clk_get(NULL, "pck1");
- parent = clk_get(NULL, "plla");
-
- BUG_ON(IS_ERR(pck) || IS_ERR(parent));
-
- if (clk_set_parent(pck, parent)) {
- pr_err("Failed to set PCK's parent\n");
- } else {
- /* Register PCK as ISI_MCK */
- isi_mck_lookups[0].clk = pck;
- clkdev_add_table(isi_mck_lookups,
- ARRAY_SIZE(isi_mck_lookups));
- }
-
- clk_put(pck);
- clk_put(parent);
- }
-}
-#else
-void __init at91_add_device_isi(struct isi_platform_data *data,
- bool use_pck_as_mck) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * LCD Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_pdata lcdc_data;
-
-static struct resource lcdc_resources[] = {
- [0] = {
- .start = AT91SAM9G45_LCDC_BASE,
- .end = AT91SAM9G45_LCDC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_LCDC,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_LCDC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91_lcdc_device = {
- .id = 0,
- .dev = {
- .dma_mask = &lcdc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &lcdc_data,
- },
- .resource = lcdc_resources,
- .num_resources = ARRAY_SIZE(lcdc_resources),
-};
-
-void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data)
-{
- if (!data)
- return;
-
- if (cpu_is_at91sam9g45es())
- at91_lcdc_device.name = "at91sam9g45es-lcdfb";
- else
- at91_lcdc_device.name = "at91sam9g45-lcdfb";
-
- at91_set_A_periph(AT91_PIN_PE0, 0); /* LCDDPWR */
-
- at91_set_A_periph(AT91_PIN_PE2, 0); /* LCDCC */
- at91_set_A_periph(AT91_PIN_PE3, 0); /* LCDVSYNC */
- at91_set_A_periph(AT91_PIN_PE4, 0); /* LCDHSYNC */
- at91_set_A_periph(AT91_PIN_PE5, 0); /* LCDDOTCK */
- at91_set_A_periph(AT91_PIN_PE6, 0); /* LCDDEN */
- at91_set_A_periph(AT91_PIN_PE7, 0); /* LCDD0 */
- at91_set_A_periph(AT91_PIN_PE8, 0); /* LCDD1 */
- at91_set_A_periph(AT91_PIN_PE9, 0); /* LCDD2 */
- at91_set_A_periph(AT91_PIN_PE10, 0); /* LCDD3 */
- at91_set_A_periph(AT91_PIN_PE11, 0); /* LCDD4 */
- at91_set_A_periph(AT91_PIN_PE12, 0); /* LCDD5 */
- at91_set_A_periph(AT91_PIN_PE13, 0); /* LCDD6 */
- at91_set_A_periph(AT91_PIN_PE14, 0); /* LCDD7 */
- at91_set_A_periph(AT91_PIN_PE15, 0); /* LCDD8 */
- at91_set_A_periph(AT91_PIN_PE16, 0); /* LCDD9 */
- at91_set_A_periph(AT91_PIN_PE17, 0); /* LCDD10 */
- at91_set_A_periph(AT91_PIN_PE18, 0); /* LCDD11 */
- at91_set_A_periph(AT91_PIN_PE19, 0); /* LCDD12 */
- at91_set_A_periph(AT91_PIN_PE20, 0); /* LCDD13 */
- at91_set_A_periph(AT91_PIN_PE21, 0); /* LCDD14 */
- at91_set_A_periph(AT91_PIN_PE22, 0); /* LCDD15 */
- at91_set_A_periph(AT91_PIN_PE23, 0); /* LCDD16 */
- at91_set_A_periph(AT91_PIN_PE24, 0); /* LCDD17 */
- at91_set_A_periph(AT91_PIN_PE25, 0); /* LCDD18 */
- at91_set_A_periph(AT91_PIN_PE26, 0); /* LCDD19 */
- at91_set_A_periph(AT91_PIN_PE27, 0); /* LCDD20 */
- at91_set_A_periph(AT91_PIN_PE28, 0); /* LCDD21 */
- at91_set_A_periph(AT91_PIN_PE29, 0); /* LCDD22 */
- at91_set_A_periph(AT91_PIN_PE30, 0); /* LCDD23 */
-
- lcdc_data = *data;
- platform_device_register(&at91_lcdc_device);
-}
-#else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Timer/Counter block
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_ATMEL_TCLIB
-static struct resource tcb0_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_TCB0,
- .end = AT91SAM9G45_BASE_TCB0 + SZ_256 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9g45_tcb0_device = {
- .name = "atmel_tcb",
- .id = 0,
- .resource = tcb0_resources,
- .num_resources = ARRAY_SIZE(tcb0_resources),
-};
-
-/* TCB1 begins with TC3 */
-static struct resource tcb1_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_TCB1,
- .end = AT91SAM9G45_BASE_TCB1 + SZ_256 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TCB,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9g45_tcb1_device = {
- .name = "atmel_tcb",
- .id = 1,
- .resource = tcb1_resources,
- .num_resources = ARRAY_SIZE(tcb1_resources),
-};
-
-static void __init at91_add_device_tc(void)
-{
- platform_device_register(&at91sam9g45_tcb0_device);
- platform_device_register(&at91sam9g45_tcb1_device);
-}
-#else
-static void __init at91_add_device_tc(void) { }
-#endif
-
-
-/* --------------------------------------------------------------------
- * RTC
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
-static struct resource rtc_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_RTC,
- .end = AT91SAM9G45_BASE_RTC + SZ_256 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91_ID_SYS,
- .end = NR_IRQS_LEGACY + AT91_ID_SYS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9g45_rtc_device = {
- .name = "at91_rtc",
- .id = -1,
- .resource = rtc_resources,
- .num_resources = ARRAY_SIZE(rtc_resources),
-};
-
-static void __init at91_add_device_rtc(void)
-{
- platform_device_register(&at91sam9g45_rtc_device);
-}
-#else
-static void __init at91_add_device_rtc(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * ADC and touchscreen
- * -------------------------------------------------------------------- */
-
-#if IS_ENABLED(CONFIG_AT91_ADC)
-static struct at91_adc_data adc_data;
-
-static struct resource adc_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_TSC,
- .end = AT91SAM9G45_BASE_TSC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_TSC,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device at91_adc_device = {
- .name = "at91sam9g45-adc",
- .id = -1,
- .dev = {
- .platform_data = &adc_data,
- },
- .resource = adc_resources,
- .num_resources = ARRAY_SIZE(adc_resources),
-};
-
-static struct at91_adc_trigger at91_adc_triggers[] = {
- [0] = {
- .name = "external-rising",
- .value = 1,
- .is_external = true,
- },
- [1] = {
- .name = "external-falling",
- .value = 2,
- .is_external = true,
- },
- [2] = {
- .name = "external-any",
- .value = 3,
- .is_external = true,
- },
- [3] = {
- .name = "continuous",
- .value = 6,
- .is_external = false,
- },
-};
-
-void __init at91_add_device_adc(struct at91_adc_data *data)
-{
- if (!data)
- return;
-
- if (test_bit(0, &data->channels_used))
- at91_set_gpio_input(AT91_PIN_PD20, 0);
- if (test_bit(1, &data->channels_used))
- at91_set_gpio_input(AT91_PIN_PD21, 0);
- if (test_bit(2, &data->channels_used))
- at91_set_gpio_input(AT91_PIN_PD22, 0);
- if (test_bit(3, &data->channels_used))
- at91_set_gpio_input(AT91_PIN_PD23, 0);
- if (test_bit(4, &data->channels_used))
- at91_set_gpio_input(AT91_PIN_PD24, 0);
- if (test_bit(5, &data->channels_used))
- at91_set_gpio_input(AT91_PIN_PD25, 0);
- if (test_bit(6, &data->channels_used))
- at91_set_gpio_input(AT91_PIN_PD26, 0);
- if (test_bit(7, &data->channels_used))
- at91_set_gpio_input(AT91_PIN_PD27, 0);
-
- if (data->use_external_triggers)
- at91_set_A_periph(AT91_PIN_PD28, 0);
-
- data->startup_time = 40;
- data->trigger_number = 4;
- data->trigger_list = at91_adc_triggers;
-
- adc_data = *data;
- platform_device_register(&at91_adc_device);
-}
-#else
-void __init at91_add_device_adc(struct at91_adc_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
- * RTT
- * -------------------------------------------------------------------- */
-
-static struct resource rtt_resources[] = {
- {
- .start = AT91SAM9G45_BASE_RTT,
- .end = AT91SAM9G45_BASE_RTT + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .flags = IORESOURCE_MEM,
- }, {
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device at91sam9g45_rtt_device = {
- .name = "at91_rtt",
- .id = 0,
- .resource = rtt_resources,
-};
-
-#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
-static void __init at91_add_device_rtt_rtc(void)
-{
- at91sam9g45_rtt_device.name = "rtc-at91sam9";
- /*
- * The second resource is needed:
- * GPBR will serve as the storage for RTC time offset
- */
- at91sam9g45_rtt_device.num_resources = 3;
- rtt_resources[1].start = AT91SAM9G45_BASE_GPBR +
- 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
- rtt_resources[1].end = rtt_resources[1].start + 3;
- rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
- rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
-}
-#else
-static void __init at91_add_device_rtt_rtc(void)
-{
- /* Only one resource is needed: RTT not used as RTC */
- at91sam9g45_rtt_device.num_resources = 1;
-}
-#endif
-
-static void __init at91_add_device_rtt(void)
-{
- at91_add_device_rtt_rtc();
- platform_device_register(&at91sam9g45_rtt_device);
-}
-
-
-/* --------------------------------------------------------------------
- * TRNG
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_HW_RANDOM_ATMEL) || defined(CONFIG_HW_RANDOM_ATMEL_MODULE)
-static struct resource trng_resources[] = {
- {
- .start = AT91SAM9G45_BASE_TRNG,
- .end = AT91SAM9G45_BASE_TRNG + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device at91sam9g45_trng_device = {
- .name = "atmel-trng",
- .id = -1,
- .resource = trng_resources,
- .num_resources = ARRAY_SIZE(trng_resources),
-};
-
-static void __init at91_add_device_trng(void)
-{
- platform_device_register(&at91sam9g45_trng_device);
-}
-#else
-static void __init at91_add_device_trng(void) {}
-#endif
-
-/* --------------------------------------------------------------------
- * Watchdog
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
-static struct resource wdt_resources[] = {
- {
- .start = AT91SAM9G45_BASE_WDT,
- .end = AT91SAM9G45_BASE_WDT + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at91sam9g45_wdt_device = {
- .name = "at91_wdt",
- .id = -1,
- .resource = wdt_resources,
- .num_resources = ARRAY_SIZE(wdt_resources),
-};
-
-static void __init at91_add_device_watchdog(void)
-{
- platform_device_register(&at91sam9g45_wdt_device);
-}
-#else
-static void __init at91_add_device_watchdog(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * PWM
- * --------------------------------------------------------------------*/
-
-#if IS_ENABLED(CONFIG_PWM_ATMEL)
-static struct resource pwm_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_PWMC,
- .end = AT91SAM9G45_BASE_PWMC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_PWMC,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_PWMC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9g45_pwm0_device = {
- .name = "at91sam9rl-pwm",
- .id = -1,
- .resource = pwm_resources,
- .num_resources = ARRAY_SIZE(pwm_resources),
-};
-
-void __init at91_add_device_pwm(u32 mask)
-{
- if (mask & (1 << AT91_PWM0))
- at91_set_B_periph(AT91_PIN_PD24, 1); /* enable PWM0 */
-
- if (mask & (1 << AT91_PWM1))
- at91_set_B_periph(AT91_PIN_PD31, 1); /* enable PWM1 */
-
- if (mask & (1 << AT91_PWM2))
- at91_set_B_periph(AT91_PIN_PD26, 1); /* enable PWM2 */
-
- if (mask & (1 << AT91_PWM3))
- at91_set_B_periph(AT91_PIN_PD0, 1); /* enable PWM3 */
-
- platform_device_register(&at91sam9g45_pwm0_device);
-}
-#else
-void __init at91_add_device_pwm(u32 mask) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * SSC -- Synchronous Serial Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
-static u64 ssc0_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc0_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_SSC0,
- .end = AT91SAM9G45_BASE_SSC0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC0,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9g45_ssc0_device = {
- .name = "at91sam9g45_ssc",
- .id = 0,
- .dev = {
- .dma_mask = &ssc0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ssc0_resources,
- .num_resources = ARRAY_SIZE(ssc0_resources),
-};
-
-static inline void configure_ssc0_pins(unsigned pins)
-{
- if (pins & ATMEL_SSC_TF)
- at91_set_A_periph(AT91_PIN_PD1, 1);
- if (pins & ATMEL_SSC_TK)
- at91_set_A_periph(AT91_PIN_PD0, 1);
- if (pins & ATMEL_SSC_TD)
- at91_set_A_periph(AT91_PIN_PD2, 1);
- if (pins & ATMEL_SSC_RD)
- at91_set_A_periph(AT91_PIN_PD3, 1);
- if (pins & ATMEL_SSC_RK)
- at91_set_A_periph(AT91_PIN_PD4, 1);
- if (pins & ATMEL_SSC_RF)
- at91_set_A_periph(AT91_PIN_PD5, 1);
-}
-
-static u64 ssc1_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc1_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_SSC1,
- .end = AT91SAM9G45_BASE_SSC1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC1,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_SSC1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9g45_ssc1_device = {
- .name = "at91sam9g45_ssc",
- .id = 1,
- .dev = {
- .dma_mask = &ssc1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ssc1_resources,
- .num_resources = ARRAY_SIZE(ssc1_resources),
-};
-
-static inline void configure_ssc1_pins(unsigned pins)
-{
- if (pins & ATMEL_SSC_TF)
- at91_set_A_periph(AT91_PIN_PD14, 1);
- if (pins & ATMEL_SSC_TK)
- at91_set_A_periph(AT91_PIN_PD12, 1);
- if (pins & ATMEL_SSC_TD)
- at91_set_A_periph(AT91_PIN_PD10, 1);
- if (pins & ATMEL_SSC_RD)
- at91_set_A_periph(AT91_PIN_PD11, 1);
- if (pins & ATMEL_SSC_RK)
- at91_set_A_periph(AT91_PIN_PD13, 1);
- if (pins & ATMEL_SSC_RF)
- at91_set_A_periph(AT91_PIN_PD15, 1);
-}
-
-/*
- * SSC controllers are accessed through library code, instead of any
- * kind of all-singing/all-dancing driver. For example one could be
- * used by a particular I2S audio codec's driver, while another one
- * on the same system might be used by a custom data capture driver.
- */
-void __init at91_add_device_ssc(unsigned id, unsigned pins)
-{
- struct platform_device *pdev;
-
- /*
- * NOTE: caller is responsible for passing information matching
- * "pins" to whatever will be using each particular controller.
- */
- switch (id) {
- case AT91SAM9G45_ID_SSC0:
- pdev = &at91sam9g45_ssc0_device;
- configure_ssc0_pins(pins);
- break;
- case AT91SAM9G45_ID_SSC1:
- pdev = &at91sam9g45_ssc1_device;
- configure_ssc1_pins(pins);
- break;
- default:
- return;
- }
-
- platform_device_register(pdev);
-}
-
-#else
-void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_DBGU,
- .end = AT91SAM9G45_BASE_DBGU + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91_ID_SYS,
- .end = NR_IRQS_LEGACY + AT91_ID_SYS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data dbgu_data = {
- .use_dma_tx = 0,
- .use_dma_rx = 0,
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9g45_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
- .dma_mask = &dbgu_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &dbgu_data,
- },
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PB12, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PB13, 1); /* DTXD */
-}
-
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_US0,
- .end = AT91SAM9G45_BASE_US0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US0,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart0_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9g45_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
- .dma_mask = &uart0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart0_data,
- },
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PB19, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PB18, 0); /* RXD0 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PB17, 0); /* RTS0 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PB15, 0); /* CTS0 */
-}
-
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_US1,
- .end = AT91SAM9G45_BASE_US1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US1,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart1_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9g45_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
- .dma_mask = &uart1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart1_data,
- },
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PB4, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PB5, 0); /* RXD1 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PD16, 0); /* RTS1 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PD17, 0); /* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_US2,
- .end = AT91SAM9G45_BASE_US2 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US2,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart2_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9g45_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
- .dma_mask = &uart2_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart2_data,
- },
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PB6, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PB7, 0); /* RXD2 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PC9, 0); /* RTS2 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PC11, 0); /* CTS2 */
-}
-
-static struct resource uart3_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_US3,
- .end = AT91SAM9G45_BASE_US3 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_US3,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_US3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart3_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart3_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9g45_uart3_device = {
- .name = "atmel_usart",
- .id = 4,
- .dev = {
- .dma_mask = &uart3_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart3_data,
- },
- .resource = uart3_resources,
- .num_resources = ARRAY_SIZE(uart3_resources),
-};
-
-static inline void configure_usart3_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PB8, 1); /* TXD3 */
- at91_set_A_periph(AT91_PIN_PB9, 0); /* RXD3 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PA23, 0); /* RTS3 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PA24, 0); /* CTS3 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
- struct platform_device *pdev;
- struct atmel_uart_data *pdata;
-
- switch (id) {
- case 0: /* DBGU */
- pdev = &at91sam9g45_dbgu_device;
- configure_dbgu_pins();
- break;
- case AT91SAM9G45_ID_US0:
- pdev = &at91sam9g45_uart0_device;
- configure_usart0_pins(pins);
- break;
- case AT91SAM9G45_ID_US1:
- pdev = &at91sam9g45_uart1_device;
- configure_usart1_pins(pins);
- break;
- case AT91SAM9G45_ID_US2:
- pdev = &at91sam9g45_uart2_device;
- configure_usart2_pins(pins);
- break;
- case AT91SAM9G45_ID_US3:
- pdev = &at91sam9g45_uart3_device;
- configure_usart3_pins(pins);
- break;
- default:
- return;
- }
- pdata = pdev->dev.platform_data;
- pdata->num = portnr; /* update to mapped ID */
-
- if (portnr < ATMEL_MAX_UART)
- at91_uarts[portnr] = pdev;
-}
-
-void __init at91_add_device_serial(void)
-{
- int i;
-
- for (i = 0; i < ATMEL_MAX_UART; i++) {
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-}
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-/* --------------------------------------------------------------------
- * SHA1/SHA256
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_CRYPTO_DEV_ATMEL_SHA) || defined(CONFIG_CRYPTO_DEV_ATMEL_SHA_MODULE)
-static struct resource sha_resources[] = {
- {
- .start = AT91SAM9G45_BASE_SHA,
- .end = AT91SAM9G45_BASE_SHA + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9g45_sha_device = {
- .name = "atmel_sha",
- .id = -1,
- .resource = sha_resources,
- .num_resources = ARRAY_SIZE(sha_resources),
-};
-
-static void __init at91_add_device_sha(void)
-{
- platform_device_register(&at91sam9g45_sha_device);
-}
-#else
-static void __init at91_add_device_sha(void) {}
-#endif
-
-/* --------------------------------------------------------------------
- * DES/TDES
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_CRYPTO_DEV_ATMEL_TDES) || defined(CONFIG_CRYPTO_DEV_ATMEL_TDES_MODULE)
-static struct resource tdes_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_TDES,
- .end = AT91SAM9G45_BASE_TDES + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9g45_tdes_device = {
- .name = "atmel_tdes",
- .id = -1,
- .resource = tdes_resources,
- .num_resources = ARRAY_SIZE(tdes_resources),
-};
-
-static void __init at91_add_device_tdes(void)
-{
- platform_device_register(&at91sam9g45_tdes_device);
-}
-#else
-static void __init at91_add_device_tdes(void) {}
-#endif
-
-/* --------------------------------------------------------------------
- * AES
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_CRYPTO_DEV_ATMEL_AES) || defined(CONFIG_CRYPTO_DEV_ATMEL_AES_MODULE)
-static struct crypto_platform_data aes_data;
-static struct crypto_dma_data alt_atslave;
-static u64 aes_dmamask = DMA_BIT_MASK(32);
-
-static struct resource aes_resources[] = {
- [0] = {
- .start = AT91SAM9G45_BASE_AES,
- .end = AT91SAM9G45_BASE_AES + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
- .end = NR_IRQS_LEGACY + AT91SAM9G45_ID_AESTDESSHA,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9g45_aes_device = {
- .name = "atmel_aes",
- .id = -1,
- .dev = {
- .dma_mask = &aes_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &aes_data,
- },
- .resource = aes_resources,
- .num_resources = ARRAY_SIZE(aes_resources),
-};
-
-static void __init at91_add_device_aes(void)
-{
- struct at_dma_slave *atslave;
-
- /* DMA TX slave channel configuration */
- atslave = &alt_atslave.txdata;
- atslave->dma_dev = &at_hdmac_device.dev;
- atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE | ATC_SRC_H2SEL_HW |
- ATC_SRC_PER(AT_DMA_ID_AES_RX);
-
- /* DMA RX slave channel configuration */
- atslave = &alt_atslave.rxdata;
- atslave->dma_dev = &at_hdmac_device.dev;
- atslave->cfg = ATC_FIFOCFG_ENOUGHSPACE | ATC_DST_H2SEL_HW |
- ATC_DST_PER(AT_DMA_ID_AES_TX);
-
- aes_data.dma_slave = &alt_atslave;
- platform_device_register(&at91sam9g45_aes_device);
-}
-#else
-static void __init at91_add_device_aes(void) {}
-#endif
-
-/* -------------------------------------------------------------------- */
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
- if (of_have_populated_dt())
- return 0;
-
- at91_add_device_hdmac();
- at91_add_device_rtc();
- at91_add_device_rtt();
- at91_add_device_trng();
- at91_add_device_watchdog();
- at91_add_device_tc();
- at91_add_device_sha();
- at91_add_device_tdes();
- at91_add_device_aes();
- return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
* Licensed under GPLv2 or later.
*/
-#include <linux/module.h>
-#include <linux/dma-mapping.h>
-#include <linux/clk/at91_pmc.h>
+#include <asm/system_misc.h>
+#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/at91sam9n12.h>
-#include <mach/cpu.h>
-
-#include "board.h"
#include "soc.h"
#include "generic.h"
-#include "sam9_smc.h"
-
-#if defined(CONFIG_OLD_CLK_AT91)
-#include "clock.h"
-/* --------------------------------------------------------------------
- * Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioAB_clk = {
- .name = "pioAB_clk",
- .pmc_mask = 1 << AT91SAM9N12_ID_PIOAB,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioCD_clk = {
- .name = "pioCD_clk",
- .pmc_mask = 1 << AT91SAM9N12_ID_PIOCD,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
- .name = "usart0_clk",
- .pmc_mask = 1 << AT91SAM9N12_ID_USART0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
- .name = "usart1_clk",
- .pmc_mask = 1 << AT91SAM9N12_ID_USART1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
- .name = "usart2_clk",
- .pmc_mask = 1 << AT91SAM9N12_ID_USART2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart3_clk = {
- .name = "usart3_clk",
- .pmc_mask = 1 << AT91SAM9N12_ID_USART3,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi0_clk = {
- .name = "twi0_clk",
- .pmc_mask = 1 << AT91SAM9N12_ID_TWI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi1_clk = {
- .name = "twi1_clk",
- .pmc_mask = 1 << AT91SAM9N12_ID_TWI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc_clk = {
- .name = "mci_clk",
- .pmc_mask = 1 << AT91SAM9N12_ID_MCI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
- .name = "spi0_clk",
- .pmc_mask = 1 << AT91SAM9N12_ID_SPI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
- .name = "spi1_clk",
- .pmc_mask = 1 << AT91SAM9N12_ID_SPI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk uart0_clk = {
- .name = "uart0_clk",
- .pmc_mask = 1 << AT91SAM9N12_ID_UART0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk uart1_clk = {
- .name = "uart1_clk",
- .pmc_mask = 1 << AT91SAM9N12_ID_UART1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tcb_clk = {
- .name = "tcb_clk",
- .pmc_mask = 1 << AT91SAM9N12_ID_TCB,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pwm_clk = {
- .name = "pwm_clk",
- .pmc_mask = 1 << AT91SAM9N12_ID_PWM,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk adc_clk = {
- .name = "adc_clk",
- .pmc_mask = 1 << AT91SAM9N12_ID_ADC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk dma_clk = {
- .name = "dma_clk",
- .pmc_mask = 1 << AT91SAM9N12_ID_DMA,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk uhp_clk = {
- .name = "uhp",
- .pmc_mask = 1 << AT91SAM9N12_ID_UHP,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk udp_clk = {
- .name = "udp_clk",
- .pmc_mask = 1 << AT91SAM9N12_ID_UDP,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk lcdc_clk = {
- .name = "lcdc_clk",
- .pmc_mask = 1 << AT91SAM9N12_ID_LCDC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc_clk = {
- .name = "ssc_clk",
- .pmc_mask = 1 << AT91SAM9N12_ID_SSC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
- &pioAB_clk,
- &pioCD_clk,
- &usart0_clk,
- &usart1_clk,
- &usart2_clk,
- &usart3_clk,
- &twi0_clk,
- &twi1_clk,
- &mmc_clk,
- &spi0_clk,
- &spi1_clk,
- &lcdc_clk,
- &uart0_clk,
- &uart1_clk,
- &tcb_clk,
- &pwm_clk,
- &adc_clk,
- &dma_clk,
- &uhp_clk,
- &udp_clk,
- &ssc_clk,
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
- /* lookup table for DT entries */
- CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
- CLKDEV_CON_DEV_ID("usart", "f801c000.serial", &usart0_clk),
- CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart1_clk),
- CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart2_clk),
- CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc_clk),
- CLKDEV_CON_DEV_ID(NULL, "f0010000.ssc", &ssc_clk),
- CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma_clk),
- CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk),
- CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "f0000000.spi", &spi0_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "f0004000.spi", &spi1_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioAB_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioAB_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCD_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCD_clk),
- /* additional fake clock for macb_hclk */
- CLKDEV_CON_DEV_ID("hclk", "500000.ohci", &uhp_clk),
- CLKDEV_CON_DEV_ID("ohci_clk", "500000.ohci", &uhp_clk),
- CLKDEV_CON_DEV_ID(NULL, "f8034000.pwm", &pwm_clk),
-};
-
-/*
- * The two programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
- .name = "pck0",
- .pmc_mask = AT91_PMC_PCK0,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 0,
-};
-static struct clk pck1 = {
- .name = "pck1",
- .pmc_mask = AT91_PMC_PCK1,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 1,
-};
-
-static void __init at91sam9n12_register_clocks(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
- clk_register(periph_clocks[i]);
- clk_register(&pck0);
- clk_register(&pck1);
-
- clkdev_add_table(periph_clocks_lookups,
- ARRAY_SIZE(periph_clocks_lookups));
-
-}
-#else
-#define at91sam9n12_register_clocks NULL
-#endif
/* --------------------------------------------------------------------
* AT91SAM9N12 processor initialization
AT91_SOC_START(at91sam9n12)
.map_io = at91sam9n12_map_io,
- .register_clocks = at91sam9n12_register_clocks,
.init = at91sam9n12_initialize,
AT91_SOC_END
* more details.
*/
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/clk/at91_pmc.h>
-
-#include <asm/proc-fns.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
#include <asm/system_misc.h>
+#include <asm/irq.h>
#include <mach/cpu.h>
#include <mach/at91_dbgu.h>
-#include <mach/at91sam9rl.h>
#include <mach/hardware.h>
-#include "at91_aic.h"
#include "soc.h"
#include "generic.h"
-#include "sam9_smc.h"
-#include "pm.h"
-
-/* --------------------------------------------------------------------
- * Clocks
- * -------------------------------------------------------------------- */
-#if defined(CONFIG_OLD_CLK_AT91)
-#include "clock.h"
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioA_clk = {
- .name = "pioA_clk",
- .pmc_mask = 1 << AT91SAM9RL_ID_PIOA,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioB_clk = {
- .name = "pioB_clk",
- .pmc_mask = 1 << AT91SAM9RL_ID_PIOB,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioC_clk = {
- .name = "pioC_clk",
- .pmc_mask = 1 << AT91SAM9RL_ID_PIOC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioD_clk = {
- .name = "pioD_clk",
- .pmc_mask = 1 << AT91SAM9RL_ID_PIOD,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
- .name = "usart0_clk",
- .pmc_mask = 1 << AT91SAM9RL_ID_US0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
- .name = "usart1_clk",
- .pmc_mask = 1 << AT91SAM9RL_ID_US1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
- .name = "usart2_clk",
- .pmc_mask = 1 << AT91SAM9RL_ID_US2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart3_clk = {
- .name = "usart3_clk",
- .pmc_mask = 1 << AT91SAM9RL_ID_US3,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc_clk = {
- .name = "mci_clk",
- .pmc_mask = 1 << AT91SAM9RL_ID_MCI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi0_clk = {
- .name = "twi0_clk",
- .pmc_mask = 1 << AT91SAM9RL_ID_TWI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi1_clk = {
- .name = "twi1_clk",
- .pmc_mask = 1 << AT91SAM9RL_ID_TWI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi_clk = {
- .name = "spi_clk",
- .pmc_mask = 1 << AT91SAM9RL_ID_SPI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc0_clk = {
- .name = "ssc0_clk",
- .pmc_mask = 1 << AT91SAM9RL_ID_SSC0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc1_clk = {
- .name = "ssc1_clk",
- .pmc_mask = 1 << AT91SAM9RL_ID_SSC1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc0_clk = {
- .name = "tc0_clk",
- .pmc_mask = 1 << AT91SAM9RL_ID_TC0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc1_clk = {
- .name = "tc1_clk",
- .pmc_mask = 1 << AT91SAM9RL_ID_TC1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tc2_clk = {
- .name = "tc2_clk",
- .pmc_mask = 1 << AT91SAM9RL_ID_TC2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pwm_clk = {
- .name = "pwm_clk",
- .pmc_mask = 1 << AT91SAM9RL_ID_PWMC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tsc_clk = {
- .name = "tsc_clk",
- .pmc_mask = 1 << AT91SAM9RL_ID_TSC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk dma_clk = {
- .name = "dma_clk",
- .pmc_mask = 1 << AT91SAM9RL_ID_DMA,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk udphs_clk = {
- .name = "udphs_clk",
- .pmc_mask = 1 << AT91SAM9RL_ID_UDPHS,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk lcdc_clk = {
- .name = "lcdc_clk",
- .pmc_mask = 1 << AT91SAM9RL_ID_LCDC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ac97_clk = {
- .name = "ac97_clk",
- .pmc_mask = 1 << AT91SAM9RL_ID_AC97C,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk adc_op_clk = {
- .name = "adc_op_clk",
- .type = CLK_TYPE_PERIPHERAL,
- .rate_hz = 1000000,
-};
-
-static struct clk *periph_clocks[] __initdata = {
- &pioA_clk,
- &pioB_clk,
- &pioC_clk,
- &pioD_clk,
- &usart0_clk,
- &usart1_clk,
- &usart2_clk,
- &usart3_clk,
- &mmc_clk,
- &twi0_clk,
- &twi1_clk,
- &spi_clk,
- &ssc0_clk,
- &ssc1_clk,
- &tc0_clk,
- &tc1_clk,
- &tc2_clk,
- &pwm_clk,
- &tsc_clk,
- &dma_clk,
- &udphs_clk,
- &lcdc_clk,
- &ac97_clk,
- &adc_op_clk,
- // irq0
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
- CLKDEV_CON_DEV_ID("hclk", "at91sam9rl-lcdfb.0", &lcdc_clk),
- CLKDEV_CON_DEV_ID("hclk", "atmel_usba_udc", &utmi_clk),
- CLKDEV_CON_DEV_ID("pclk", "atmel_usba_udc", &udphs_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "atmel_tcb.0", &tc0_clk),
- CLKDEV_CON_DEV_ID("t1_clk", "atmel_tcb.0", &tc1_clk),
- CLKDEV_CON_DEV_ID("t2_clk", "atmel_tcb.0", &tc2_clk),
- CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.0", &ssc0_clk),
- CLKDEV_CON_DEV_ID("pclk", "at91rm9200_ssc.1", &ssc1_clk),
- CLKDEV_CON_DEV_ID("pclk", "fffc0000.ssc", &ssc0_clk),
- CLKDEV_CON_DEV_ID("pclk", "fffc4000.ssc", &ssc1_clk),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.0", &twi0_clk),
- CLKDEV_CON_DEV_ID(NULL, "i2c-at91sam9g20.1", &twi1_clk),
- CLKDEV_CON_DEV_ID(NULL, "at91sam9rl-pwm", &pwm_clk),
- CLKDEV_CON_ID("pioA", &pioA_clk),
- CLKDEV_CON_ID("pioB", &pioB_clk),
- CLKDEV_CON_ID("pioC", &pioC_clk),
- CLKDEV_CON_ID("pioD", &pioD_clk),
- /* more lookup table for DT entries */
- CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
- CLKDEV_CON_DEV_ID("usart", "fffb0000.serial", &usart0_clk),
- CLKDEV_CON_DEV_ID("usart", "ffffb400.serial", &usart1_clk),
- CLKDEV_CON_DEV_ID("usart", "ffffb800.serial", &usart2_clk),
- CLKDEV_CON_DEV_ID("usart", "ffffbc00.serial", &usart3_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "fffa0000.timer", &tc0_clk),
- CLKDEV_CON_DEV_ID("t1_clk", "fffa0000.timer", &tc1_clk),
- CLKDEV_CON_DEV_ID("t2_clk", "fffa0000.timer", &tc2_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "fffa4000.mmc", &mmc_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffa8000.i2c", &twi0_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffac000.i2c", &twi1_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffc8000.pwm", &pwm_clk),
- CLKDEV_CON_DEV_ID(NULL, "ffffc800.pwm", &pwm_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioA_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioB_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioC_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioD_clk),
- CLKDEV_CON_ID("adc_clk", &tsc_clk),
-};
-
-static struct clk_lookup usart_clocks_lookups[] = {
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.0", &mck),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.1", &usart0_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.2", &usart1_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.3", &usart2_clk),
- CLKDEV_CON_DEV_ID("usart", "atmel_usart.4", &usart3_clk),
-};
-
-/*
- * The two programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
- .name = "pck0",
- .pmc_mask = AT91_PMC_PCK0,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 0,
-};
-static struct clk pck1 = {
- .name = "pck1",
- .pmc_mask = AT91_PMC_PCK1,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 1,
-};
-
-static void __init at91sam9rl_register_clocks(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
- clk_register(periph_clocks[i]);
-
- clkdev_add_table(periph_clocks_lookups,
- ARRAY_SIZE(periph_clocks_lookups));
- clkdev_add_table(usart_clocks_lookups,
- ARRAY_SIZE(usart_clocks_lookups));
-
- clk_register(&pck0);
- clk_register(&pck1);
-}
-#endif
-
-/* --------------------------------------------------------------------
- * GPIO
- * -------------------------------------------------------------------- */
-
-static struct at91_gpio_bank at91sam9rl_gpio[] __initdata = {
- {
- .id = AT91SAM9RL_ID_PIOA,
- .regbase = AT91SAM9RL_BASE_PIOA,
- }, {
- .id = AT91SAM9RL_ID_PIOB,
- .regbase = AT91SAM9RL_BASE_PIOB,
- }, {
- .id = AT91SAM9RL_ID_PIOC,
- .regbase = AT91SAM9RL_BASE_PIOC,
- }, {
- .id = AT91SAM9RL_ID_PIOD,
- .regbase = AT91SAM9RL_BASE_PIOD,
- }
-};
/* --------------------------------------------------------------------
* AT91SAM9RL processor initialization
at91_init_sram(0, AT91SAM9RL_SRAM_BASE, sram_size);
}
-static void __init at91sam9rl_ioremap_registers(void)
-{
- at91_ioremap_ramc(0, AT91SAM9RL_BASE_SDRAMC, 512);
- at91sam926x_ioremap_pit(AT91SAM9RL_BASE_PIT);
- at91sam9_ioremap_smc(0, AT91SAM9RL_BASE_SMC);
- at91_ioremap_matrix(AT91SAM9RL_BASE_MATRIX);
- at91_pm_set_standby(at91sam9_sdram_standby);
-}
-
static void __init at91sam9rl_initialize(void)
{
arm_pm_idle = at91sam9_idle;
at91_sysirq_mask_rtc(AT91SAM9RL_BASE_RTC);
at91_sysirq_mask_rtt(AT91SAM9RL_BASE_RTT);
-
- /* Register GPIO subsystem */
- at91_gpio_init(at91sam9rl_gpio, 4);
-}
-
-static struct resource rstc_resources[] = {
- [0] = {
- .start = AT91SAM9RL_BASE_RSTC,
- .end = AT91SAM9RL_BASE_RSTC + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9RL_BASE_SDRAMC,
- .end = AT91SAM9RL_BASE_SDRAMC + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device rstc_device = {
- .name = "at91-sam9260-reset",
- .resource = rstc_resources,
- .num_resources = ARRAY_SIZE(rstc_resources),
-};
-
-static struct resource shdwc_resources[] = {
- [0] = {
- .start = AT91SAM9RL_BASE_SHDWC,
- .end = AT91SAM9RL_BASE_SHDWC + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device shdwc_device = {
- .name = "at91-poweroff",
- .resource = shdwc_resources,
- .num_resources = ARRAY_SIZE(shdwc_resources),
-};
-
-static void __init at91sam9rl_register_devices(void)
-{
- platform_device_register(&rstc_device);
- platform_device_register(&shdwc_device);
-}
-
-/* --------------------------------------------------------------------
- * Interrupt initialization
- * -------------------------------------------------------------------- */
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91sam9rl_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller */
- 7, /* System Peripherals */
- 1, /* Parallel IO Controller A */
- 1, /* Parallel IO Controller B */
- 1, /* Parallel IO Controller C */
- 1, /* Parallel IO Controller D */
- 5, /* USART 0 */
- 5, /* USART 1 */
- 5, /* USART 2 */
- 5, /* USART 3 */
- 0, /* Multimedia Card Interface */
- 6, /* Two-Wire Interface 0 */
- 6, /* Two-Wire Interface 1 */
- 5, /* Serial Peripheral Interface */
- 4, /* Serial Synchronous Controller 0 */
- 4, /* Serial Synchronous Controller 1 */
- 0, /* Timer Counter 0 */
- 0, /* Timer Counter 1 */
- 0, /* Timer Counter 2 */
- 0,
- 0, /* Touch Screen Controller */
- 0, /* DMA Controller */
- 2, /* USB Device High speed port */
- 2, /* LCD Controller */
- 6, /* AC97 Controller */
- 0,
- 0,
- 0,
- 0,
- 0,
- 0,
- 0, /* Advanced Interrupt Controller */
-};
-
-static void __init at91sam9rl_init_time(void)
-{
- at91sam926x_pit_init(NR_IRQS_LEGACY + AT91_ID_SYS);
}
AT91_SOC_START(at91sam9rl)
.map_io = at91sam9rl_map_io,
- .default_irq_priority = at91sam9rl_default_irq_priority,
- .extern_irq = (1 << AT91SAM9RL_ID_IRQ0),
- .ioremap_registers = at91sam9rl_ioremap_registers,
-#if defined(CONFIG_OLD_CLK_AT91)
- .register_clocks = at91sam9rl_register_clocks,
-#endif
- .register_devices = at91sam9rl_register_devices,
.init = at91sam9rl_initialize,
- .init_time = at91sam9rl_init_time,
AT91_SOC_END
+++ /dev/null
-/*
- * Copyright (C) 2007 Atmel Corporation
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/i2c-gpio.h>
-
-#include <linux/fb.h>
-#include <video/atmel_lcdc.h>
-
-#include <mach/at91sam9rl.h>
-#include <mach/at91sam9rl_matrix.h>
-#include <mach/at91_matrix.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/hardware.h>
-#include <linux/platform_data/dma-atmel.h>
-#include <linux/platform_data/at91_adc.h>
-
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-/* --------------------------------------------------------------------
- * HDMAC - AHB DMA Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT_HDMAC) || defined(CONFIG_AT_HDMAC_MODULE)
-static u64 hdmac_dmamask = DMA_BIT_MASK(32);
-
-static struct resource hdmac_resources[] = {
- [0] = {
- .start = AT91SAM9RL_BASE_DMA,
- .end = AT91SAM9RL_BASE_DMA + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_DMA,
- .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_DMA,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at_hdmac_device = {
- .name = "at91sam9rl_dma",
- .id = -1,
- .dev = {
- .dma_mask = &hdmac_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = hdmac_resources,
- .num_resources = ARRAY_SIZE(hdmac_resources),
-};
-
-void __init at91_add_device_hdmac(void)
-{
- platform_device_register(&at_hdmac_device);
-}
-#else
-void __init at91_add_device_hdmac(void) {}
-#endif
-
-/* --------------------------------------------------------------------
- * USB HS Device (Gadget)
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_USB_ATMEL_USBA) || defined(CONFIG_USB_ATMEL_USBA_MODULE)
-
-static struct resource usba_udc_resources[] = {
- [0] = {
- .start = AT91SAM9RL_UDPHS_FIFO,
- .end = AT91SAM9RL_UDPHS_FIFO + SZ_512K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9RL_BASE_UDPHS,
- .end = AT91SAM9RL_BASE_UDPHS + SZ_1K - 1,
- .flags = IORESOURCE_MEM,
- },
- [2] = {
- .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_UDPHS,
- .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_UDPHS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-#define EP(nam, idx, maxpkt, maxbk, dma, isoc) \
- [idx] = { \
- .name = nam, \
- .index = idx, \
- .fifo_size = maxpkt, \
- .nr_banks = maxbk, \
- .can_dma = dma, \
- .can_isoc = isoc, \
- }
-
-static struct usba_ep_data usba_udc_ep[] __initdata = {
- EP("ep0", 0, 64, 1, 0, 0),
- EP("ep1", 1, 1024, 2, 1, 1),
- EP("ep2", 2, 1024, 2, 1, 1),
- EP("ep3", 3, 1024, 3, 1, 0),
- EP("ep4", 4, 1024, 3, 1, 0),
- EP("ep5", 5, 1024, 3, 1, 1),
- EP("ep6", 6, 1024, 3, 1, 1),
-};
-
-#undef EP
-
-/*
- * pdata doesn't have room for any endpoints, so we need to
- * append room for the ones we need right after it.
- */
-static struct {
- struct usba_platform_data pdata;
- struct usba_ep_data ep[7];
-} usba_udc_data;
-
-static struct platform_device at91_usba_udc_device = {
- .name = "atmel_usba_udc",
- .id = -1,
- .dev = {
- .platform_data = &usba_udc_data.pdata,
- },
- .resource = usba_udc_resources,
- .num_resources = ARRAY_SIZE(usba_udc_resources),
-};
-
-void __init at91_add_device_usba(struct usba_platform_data *data)
-{
- /*
- * Invalid pins are 0 on AT91, but the usba driver is shared
- * with AVR32, which use negative values instead. Once/if
- * gpio_is_valid() is ported to AT91, revisit this code.
- */
- usba_udc_data.pdata.vbus_pin = -EINVAL;
- usba_udc_data.pdata.num_ep = ARRAY_SIZE(usba_udc_ep);
- memcpy(usba_udc_data.ep, usba_udc_ep, sizeof(usba_udc_ep));
-
- if (data && gpio_is_valid(data->vbus_pin)) {
- at91_set_gpio_input(data->vbus_pin, 0);
- at91_set_deglitch(data->vbus_pin, 1);
- usba_udc_data.pdata.vbus_pin = data->vbus_pin;
- }
-
- /* Pullup pin is handled internally by USB device peripheral */
-
- platform_device_register(&at91_usba_udc_device);
-}
-#else
-void __init at91_add_device_usba(struct usba_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * MMC / SD
- * -------------------------------------------------------------------- */
-
-#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
-static u64 mmc_dmamask = DMA_BIT_MASK(32);
-static struct mci_platform_data mmc_data;
-
-static struct resource mmc_resources[] = {
- [0] = {
- .start = AT91SAM9RL_BASE_MCI,
- .end = AT91SAM9RL_BASE_MCI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_MCI,
- .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_MCI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9rl_mmc_device = {
- .name = "atmel_mci",
- .id = -1,
- .dev = {
- .dma_mask = &mmc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &mmc_data,
- },
- .resource = mmc_resources,
- .num_resources = ARRAY_SIZE(mmc_resources),
-};
-
-void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data)
-{
- if (!data)
- return;
-
- if (data->slot[0].bus_width) {
- /* input/irq */
- if (gpio_is_valid(data->slot[0].detect_pin)) {
- at91_set_gpio_input(data->slot[0].detect_pin, 1);
- at91_set_deglitch(data->slot[0].detect_pin, 1);
- }
- if (gpio_is_valid(data->slot[0].wp_pin))
- at91_set_gpio_input(data->slot[0].wp_pin, 1);
-
- /* CLK */
- at91_set_A_periph(AT91_PIN_PA2, 0);
-
- /* CMD */
- at91_set_A_periph(AT91_PIN_PA1, 1);
-
- /* DAT0, maybe DAT1..DAT3 */
- at91_set_A_periph(AT91_PIN_PA0, 1);
- if (data->slot[0].bus_width == 4) {
- at91_set_A_periph(AT91_PIN_PA3, 1);
- at91_set_A_periph(AT91_PIN_PA4, 1);
- at91_set_A_periph(AT91_PIN_PA5, 1);
- }
-
- mmc_data = *data;
- platform_device_register(&at91sam9rl_mmc_device);
- }
-}
-#else
-void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * NAND / SmartMedia
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_MTD_NAND_ATMEL) || defined(CONFIG_MTD_NAND_ATMEL_MODULE)
-static struct atmel_nand_data nand_data;
-
-#define NAND_BASE AT91_CHIPSELECT_3
-
-static struct resource nand_resources[] = {
- [0] = {
- .start = NAND_BASE,
- .end = NAND_BASE + SZ_256M - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = AT91SAM9RL_BASE_ECC,
- .end = AT91SAM9RL_BASE_ECC + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device atmel_nand_device = {
- .name = "atmel_nand",
- .id = -1,
- .dev = {
- .platform_data = &nand_data,
- },
- .resource = nand_resources,
- .num_resources = ARRAY_SIZE(nand_resources),
-};
-
-void __init at91_add_device_nand(struct atmel_nand_data *data)
-{
- unsigned long csa;
-
- if (!data)
- return;
-
- csa = at91_matrix_read(AT91_MATRIX_EBICSA);
- at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_CS3A_SMC_SMARTMEDIA);
-
- /* enable pin */
- if (gpio_is_valid(data->enable_pin))
- at91_set_gpio_output(data->enable_pin, 1);
-
- /* ready/busy pin */
- if (gpio_is_valid(data->rdy_pin))
- at91_set_gpio_input(data->rdy_pin, 1);
-
- /* card detect pin */
- if (gpio_is_valid(data->det_pin))
- at91_set_gpio_input(data->det_pin, 1);
-
- at91_set_A_periph(AT91_PIN_PB4, 0); /* NANDOE */
- at91_set_A_periph(AT91_PIN_PB5, 0); /* NANDWE */
-
- nand_data = *data;
- platform_device_register(&atmel_nand_device);
-}
-
-#else
-void __init at91_add_device_nand(struct atmel_nand_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * TWI (i2c)
- * -------------------------------------------------------------------- */
-
-/*
- * Prefer the GPIO code since the TWI controller isn't robust
- * (gets overruns and underruns under load) and can only issue
- * repeated STARTs in one scenario (the driver doesn't yet handle them).
- */
-#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE)
-
-static struct i2c_gpio_platform_data pdata = {
- .sda_pin = AT91_PIN_PA23,
- .sda_is_open_drain = 1,
- .scl_pin = AT91_PIN_PA24,
- .scl_is_open_drain = 1,
- .udelay = 2, /* ~100 kHz */
-};
-
-static struct platform_device at91sam9rl_twi_device = {
- .name = "i2c-gpio",
- .id = 0,
- .dev.platform_data = &pdata,
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- at91_set_GPIO_periph(AT91_PIN_PA23, 1); /* TWD (SDA) */
- at91_set_multi_drive(AT91_PIN_PA23, 1);
-
- at91_set_GPIO_periph(AT91_PIN_PA24, 1); /* TWCK (SCL) */
- at91_set_multi_drive(AT91_PIN_PA24, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91sam9rl_twi_device);
-}
-
-#elif defined(CONFIG_I2C_AT91) || defined(CONFIG_I2C_AT91_MODULE)
-
-static struct resource twi_resources[] = {
- [0] = {
- .start = AT91SAM9RL_BASE_TWI0,
- .end = AT91SAM9RL_BASE_TWI0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TWI0,
- .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TWI0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9rl_twi_device = {
- .name = "i2c-at91sam9g20",
- .id = 0,
- .resource = twi_resources,
- .num_resources = ARRAY_SIZE(twi_resources),
-};
-
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices)
-{
- /* pins used for TWI interface */
- at91_set_A_periph(AT91_PIN_PA23, 0); /* TWD */
- at91_set_multi_drive(AT91_PIN_PA23, 1);
-
- at91_set_A_periph(AT91_PIN_PA24, 0); /* TWCK */
- at91_set_multi_drive(AT91_PIN_PA24, 1);
-
- i2c_register_board_info(0, devices, nr_devices);
- platform_device_register(&at91sam9rl_twi_device);
-}
-#else
-void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * SPI
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-static u64 spi_dmamask = DMA_BIT_MASK(32);
-
-static struct resource spi_resources[] = {
- [0] = {
- .start = AT91SAM9RL_BASE_SPI,
- .end = AT91SAM9RL_BASE_SPI + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_SPI,
- .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_SPI,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9rl_spi_device = {
- .name = "atmel_spi",
- .id = 0,
- .dev = {
- .dma_mask = &spi_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = spi_resources,
- .num_resources = ARRAY_SIZE(spi_resources),
-};
-
-static const unsigned spi_standard_cs[4] = { AT91_PIN_PA28, AT91_PIN_PB7, AT91_PIN_PD8, AT91_PIN_PD9 };
-
-
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices)
-{
- int i;
- unsigned long cs_pin;
-
- at91_set_A_periph(AT91_PIN_PA25, 0); /* MISO */
- at91_set_A_periph(AT91_PIN_PA26, 0); /* MOSI */
- at91_set_A_periph(AT91_PIN_PA27, 0); /* SPCK */
-
- /* Enable SPI chip-selects */
- for (i = 0; i < nr_devices; i++) {
- if (devices[i].controller_data)
- cs_pin = (unsigned long) devices[i].controller_data;
- else
- cs_pin = spi_standard_cs[devices[i].chip_select];
-
- if (!gpio_is_valid(cs_pin))
- continue;
-
- /* enable chip-select pin */
- at91_set_gpio_output(cs_pin, 1);
-
- /* pass chip-select pin to driver */
- devices[i].controller_data = (void *) cs_pin;
- }
-
- spi_register_board_info(devices, nr_devices);
- platform_device_register(&at91sam9rl_spi_device);
-}
-#else
-void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * AC97
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SND_ATMEL_AC97C) || defined(CONFIG_SND_ATMEL_AC97C_MODULE)
-static u64 ac97_dmamask = DMA_BIT_MASK(32);
-static struct ac97c_platform_data ac97_data;
-
-static struct resource ac97_resources[] = {
- [0] = {
- .start = AT91SAM9RL_BASE_AC97C,
- .end = AT91SAM9RL_BASE_AC97C + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_AC97C,
- .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_AC97C,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9rl_ac97_device = {
- .name = "atmel_ac97c",
- .id = 0,
- .dev = {
- .dma_mask = &ac97_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &ac97_data,
- },
- .resource = ac97_resources,
- .num_resources = ARRAY_SIZE(ac97_resources),
-};
-
-void __init at91_add_device_ac97(struct ac97c_platform_data *data)
-{
- if (!data)
- return;
-
- at91_set_A_periph(AT91_PIN_PD1, 0); /* AC97FS */
- at91_set_A_periph(AT91_PIN_PD2, 0); /* AC97CK */
- at91_set_A_periph(AT91_PIN_PD3, 0); /* AC97TX */
- at91_set_A_periph(AT91_PIN_PD4, 0); /* AC97RX */
-
- /* reset */
- if (gpio_is_valid(data->reset_pin))
- at91_set_gpio_output(data->reset_pin, 0);
-
- ac97_data = *data;
- platform_device_register(&at91sam9rl_ac97_device);
-}
-#else
-void __init at91_add_device_ac97(struct ac97c_platform_data *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * LCD Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static u64 lcdc_dmamask = DMA_BIT_MASK(32);
-static struct atmel_lcdfb_pdata lcdc_data;
-
-static struct resource lcdc_resources[] = {
- [0] = {
- .start = AT91SAM9RL_LCDC_BASE,
- .end = AT91SAM9RL_LCDC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_LCDC,
- .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_LCDC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91_lcdc_device = {
- .name = "at91sam9rl-lcdfb",
- .id = 0,
- .dev = {
- .dma_mask = &lcdc_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &lcdc_data,
- },
- .resource = lcdc_resources,
- .num_resources = ARRAY_SIZE(lcdc_resources),
-};
-
-void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data)
-{
- if (!data) {
- return;
- }
-
- at91_set_B_periph(AT91_PIN_PC1, 0); /* LCDPWR */
- at91_set_A_periph(AT91_PIN_PC5, 0); /* LCDHSYNC */
- at91_set_A_periph(AT91_PIN_PC6, 0); /* LCDDOTCK */
- at91_set_A_periph(AT91_PIN_PC7, 0); /* LCDDEN */
- at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDCC */
- at91_set_B_periph(AT91_PIN_PC9, 0); /* LCDD3 */
- at91_set_B_periph(AT91_PIN_PC10, 0); /* LCDD4 */
- at91_set_B_periph(AT91_PIN_PC11, 0); /* LCDD5 */
- at91_set_B_periph(AT91_PIN_PC12, 0); /* LCDD6 */
- at91_set_B_periph(AT91_PIN_PC13, 0); /* LCDD7 */
- at91_set_B_periph(AT91_PIN_PC15, 0); /* LCDD11 */
- at91_set_B_periph(AT91_PIN_PC16, 0); /* LCDD12 */
- at91_set_B_periph(AT91_PIN_PC17, 0); /* LCDD13 */
- at91_set_B_periph(AT91_PIN_PC18, 0); /* LCDD14 */
- at91_set_B_periph(AT91_PIN_PC19, 0); /* LCDD15 */
- at91_set_B_periph(AT91_PIN_PC20, 0); /* LCDD18 */
- at91_set_B_periph(AT91_PIN_PC21, 0); /* LCDD19 */
- at91_set_B_periph(AT91_PIN_PC22, 0); /* LCDD20 */
- at91_set_B_periph(AT91_PIN_PC23, 0); /* LCDD21 */
- at91_set_B_periph(AT91_PIN_PC24, 0); /* LCDD22 */
- at91_set_B_periph(AT91_PIN_PC25, 0); /* LCDD23 */
-
- lcdc_data = *data;
- platform_device_register(&at91_lcdc_device);
-}
-#else
-void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * Timer/Counter block
- * -------------------------------------------------------------------- */
-
-#ifdef CONFIG_ATMEL_TCLIB
-
-static struct resource tcb_resources[] = {
- [0] = {
- .start = AT91SAM9RL_BASE_TCB0,
- .end = AT91SAM9RL_BASE_TCB0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC0,
- .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC0,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC1,
- .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC1,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC2,
- .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TC2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9rl_tcb_device = {
- .name = "atmel_tcb",
- .id = 0,
- .resource = tcb_resources,
- .num_resources = ARRAY_SIZE(tcb_resources),
-};
-
-static void __init at91_add_device_tc(void)
-{
- platform_device_register(&at91sam9rl_tcb_device);
-}
-#else
-static void __init at91_add_device_tc(void) { }
-#endif
-
-
-/* --------------------------------------------------------------------
- * ADC and Touchscreen
- * -------------------------------------------------------------------- */
-
-#if IS_ENABLED(CONFIG_AT91_ADC)
-static struct at91_adc_data adc_data;
-
-static struct resource adc_resources[] = {
- [0] = {
- .start = AT91SAM9RL_BASE_TSC,
- .end = AT91SAM9RL_BASE_TSC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_TSC,
- .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_TSC,
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device at91_adc_device = {
- .name = "at91sam9rl-adc",
- .id = -1,
- .dev = {
- .platform_data = &adc_data,
- },
- .resource = adc_resources,
- .num_resources = ARRAY_SIZE(adc_resources),
-};
-
-static struct at91_adc_trigger at91_adc_triggers[] = {
- [0] = {
- .name = "external-rising",
- .value = 1,
- .is_external = true,
- },
- [1] = {
- .name = "external-falling",
- .value = 2,
- .is_external = true,
- },
- [2] = {
- .name = "external-any",
- .value = 3,
- .is_external = true,
- },
- [3] = {
- .name = "continuous",
- .value = 6,
- .is_external = false,
- },
-};
-
-void __init at91_add_device_adc(struct at91_adc_data *data)
-{
- if (!data)
- return;
-
- if (test_bit(0, &data->channels_used))
- at91_set_A_periph(AT91_PIN_PA17, 0);
- if (test_bit(1, &data->channels_used))
- at91_set_A_periph(AT91_PIN_PA18, 0);
- if (test_bit(2, &data->channels_used))
- at91_set_A_periph(AT91_PIN_PA19, 0);
- if (test_bit(3, &data->channels_used))
- at91_set_A_periph(AT91_PIN_PA20, 0);
- if (test_bit(4, &data->channels_used))
- at91_set_A_periph(AT91_PIN_PD6, 0);
- if (test_bit(5, &data->channels_used))
- at91_set_A_periph(AT91_PIN_PD7, 0);
-
- if (data->use_external_triggers)
- at91_set_A_periph(AT91_PIN_PB15, 0);
-
- data->startup_time = 40;
- data->trigger_number = 4;
- data->trigger_list = at91_adc_triggers;
-
- adc_data = *data;
- platform_device_register(&at91_adc_device);
-}
-#else
-void __init at91_add_device_adc(struct at91_adc_data *data) {}
-#endif
-
-/* --------------------------------------------------------------------
- * RTC
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_RTC_DRV_AT91RM9200) || defined(CONFIG_RTC_DRV_AT91RM9200_MODULE)
-static struct platform_device at91sam9rl_rtc_device = {
- .name = "at91_rtc",
- .id = -1,
- .num_resources = 0,
-};
-
-static void __init at91_add_device_rtc(void)
-{
- platform_device_register(&at91sam9rl_rtc_device);
-}
-#else
-static void __init at91_add_device_rtc(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * RTT
- * -------------------------------------------------------------------- */
-
-static struct resource rtt_resources[] = {
- {
- .start = AT91SAM9RL_BASE_RTT,
- .end = AT91SAM9RL_BASE_RTT + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .flags = IORESOURCE_MEM,
- }, {
- .flags = IORESOURCE_IRQ,
- }
-};
-
-static struct platform_device at91sam9rl_rtt_device = {
- .name = "at91_rtt",
- .id = 0,
- .resource = rtt_resources,
-};
-
-#if IS_ENABLED(CONFIG_RTC_DRV_AT91SAM9)
-static void __init at91_add_device_rtt_rtc(void)
-{
- at91sam9rl_rtt_device.name = "rtc-at91sam9";
- /*
- * The second resource is needed:
- * GPBR will serve as the storage for RTC time offset
- */
- at91sam9rl_rtt_device.num_resources = 3;
- rtt_resources[1].start = AT91SAM9RL_BASE_GPBR +
- 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
- rtt_resources[1].end = rtt_resources[1].start + 3;
- rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
- rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
-}
-#else
-static void __init at91_add_device_rtt_rtc(void)
-{
- /* Only one resource is needed: RTT not used as RTC */
- at91sam9rl_rtt_device.num_resources = 1;
-}
-#endif
-
-static void __init at91_add_device_rtt(void)
-{
- at91_add_device_rtt_rtc();
- platform_device_register(&at91sam9rl_rtt_device);
-}
-
-
-/* --------------------------------------------------------------------
- * Watchdog
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
-static struct resource wdt_resources[] = {
- {
- .start = AT91SAM9RL_BASE_WDT,
- .end = AT91SAM9RL_BASE_WDT + SZ_16 - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device at91sam9rl_wdt_device = {
- .name = "at91_wdt",
- .id = -1,
- .resource = wdt_resources,
- .num_resources = ARRAY_SIZE(wdt_resources),
-};
-
-static void __init at91_add_device_watchdog(void)
-{
- platform_device_register(&at91sam9rl_wdt_device);
-}
-#else
-static void __init at91_add_device_watchdog(void) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * PWM
- * --------------------------------------------------------------------*/
-
-#if IS_ENABLED(CONFIG_PWM_ATMEL)
-static struct resource pwm_resources[] = {
- [0] = {
- .start = AT91SAM9RL_BASE_PWMC,
- .end = AT91SAM9RL_BASE_PWMC + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_PWMC,
- .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_PWMC,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9rl_pwm0_device = {
- .name = "at91sam9rl-pwm",
- .id = -1,
- .resource = pwm_resources,
- .num_resources = ARRAY_SIZE(pwm_resources),
-};
-
-void __init at91_add_device_pwm(u32 mask)
-{
- if (mask & (1 << AT91_PWM0))
- at91_set_B_periph(AT91_PIN_PB8, 1); /* enable PWM0 */
-
- if (mask & (1 << AT91_PWM1))
- at91_set_B_periph(AT91_PIN_PB9, 1); /* enable PWM1 */
-
- if (mask & (1 << AT91_PWM2))
- at91_set_B_periph(AT91_PIN_PD5, 1); /* enable PWM2 */
-
- if (mask & (1 << AT91_PWM3))
- at91_set_B_periph(AT91_PIN_PD8, 1); /* enable PWM3 */
-
- platform_device_register(&at91sam9rl_pwm0_device);
-}
-#else
-void __init at91_add_device_pwm(u32 mask) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * SSC -- Synchronous Serial Controller
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_ATMEL_SSC) || defined(CONFIG_ATMEL_SSC_MODULE)
-static u64 ssc0_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc0_resources[] = {
- [0] = {
- .start = AT91SAM9RL_BASE_SSC0,
- .end = AT91SAM9RL_BASE_SSC0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC0,
- .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9rl_ssc0_device = {
- .name = "at91rm9200_ssc",
- .id = 0,
- .dev = {
- .dma_mask = &ssc0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ssc0_resources,
- .num_resources = ARRAY_SIZE(ssc0_resources),
-};
-
-static inline void configure_ssc0_pins(unsigned pins)
-{
- if (pins & ATMEL_SSC_TF)
- at91_set_A_periph(AT91_PIN_PC0, 1);
- if (pins & ATMEL_SSC_TK)
- at91_set_A_periph(AT91_PIN_PC1, 1);
- if (pins & ATMEL_SSC_TD)
- at91_set_A_periph(AT91_PIN_PA15, 1);
- if (pins & ATMEL_SSC_RD)
- at91_set_A_periph(AT91_PIN_PA16, 1);
- if (pins & ATMEL_SSC_RK)
- at91_set_B_periph(AT91_PIN_PA10, 1);
- if (pins & ATMEL_SSC_RF)
- at91_set_B_periph(AT91_PIN_PA22, 1);
-}
-
-static u64 ssc1_dmamask = DMA_BIT_MASK(32);
-
-static struct resource ssc1_resources[] = {
- [0] = {
- .start = AT91SAM9RL_BASE_SSC1,
- .end = AT91SAM9RL_BASE_SSC1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC1,
- .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_SSC1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device at91sam9rl_ssc1_device = {
- .name = "at91rm9200_ssc",
- .id = 1,
- .dev = {
- .dma_mask = &ssc1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- .resource = ssc1_resources,
- .num_resources = ARRAY_SIZE(ssc1_resources),
-};
-
-static inline void configure_ssc1_pins(unsigned pins)
-{
- if (pins & ATMEL_SSC_TF)
- at91_set_B_periph(AT91_PIN_PA29, 1);
- if (pins & ATMEL_SSC_TK)
- at91_set_B_periph(AT91_PIN_PA30, 1);
- if (pins & ATMEL_SSC_TD)
- at91_set_B_periph(AT91_PIN_PA13, 1);
- if (pins & ATMEL_SSC_RD)
- at91_set_B_periph(AT91_PIN_PA14, 1);
- if (pins & ATMEL_SSC_RK)
- at91_set_B_periph(AT91_PIN_PA9, 1);
- if (pins & ATMEL_SSC_RF)
- at91_set_B_periph(AT91_PIN_PA8, 1);
-}
-
-/*
- * SSC controllers are accessed through library code, instead of any
- * kind of all-singing/all-dancing driver. For example one could be
- * used by a particular I2S audio codec's driver, while another one
- * on the same system might be used by a custom data capture driver.
- */
-void __init at91_add_device_ssc(unsigned id, unsigned pins)
-{
- struct platform_device *pdev;
-
- /*
- * NOTE: caller is responsible for passing information matching
- * "pins" to whatever will be using each particular controller.
- */
- switch (id) {
- case AT91SAM9RL_ID_SSC0:
- pdev = &at91sam9rl_ssc0_device;
- configure_ssc0_pins(pins);
- break;
- case AT91SAM9RL_ID_SSC1:
- pdev = &at91sam9rl_ssc1_device;
- configure_ssc1_pins(pins);
- break;
- default:
- return;
- }
-
- platform_device_register(pdev);
-}
-
-#else
-void __init at91_add_device_ssc(unsigned id, unsigned pins) {}
-#endif
-
-
-/* --------------------------------------------------------------------
- * UART
- * -------------------------------------------------------------------- */
-
-#if defined(CONFIG_SERIAL_ATMEL)
-static struct resource dbgu_resources[] = {
- [0] = {
- .start = AT91SAM9RL_BASE_DBGU,
- .end = AT91SAM9RL_BASE_DBGU + SZ_512 - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91_ID_SYS,
- .end = NR_IRQS_LEGACY + AT91_ID_SYS,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data dbgu_data = {
- .use_dma_tx = 0,
- .use_dma_rx = 0, /* DBGU not capable of receive DMA */
-};
-
-static u64 dbgu_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9rl_dbgu_device = {
- .name = "atmel_usart",
- .id = 0,
- .dev = {
- .dma_mask = &dbgu_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &dbgu_data,
- },
- .resource = dbgu_resources,
- .num_resources = ARRAY_SIZE(dbgu_resources),
-};
-
-static inline void configure_dbgu_pins(void)
-{
- at91_set_A_periph(AT91_PIN_PA21, 0); /* DRXD */
- at91_set_A_periph(AT91_PIN_PA22, 1); /* DTXD */
-}
-
-static struct resource uart0_resources[] = {
- [0] = {
- .start = AT91SAM9RL_BASE_US0,
- .end = AT91SAM9RL_BASE_US0 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US0,
- .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US0,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart0_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart0_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9rl_uart0_device = {
- .name = "atmel_usart",
- .id = 1,
- .dev = {
- .dma_mask = &uart0_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart0_data,
- },
- .resource = uart0_resources,
- .num_resources = ARRAY_SIZE(uart0_resources),
-};
-
-static inline void configure_usart0_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PA6, 1); /* TXD0 */
- at91_set_A_periph(AT91_PIN_PA7, 0); /* RXD0 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PA9, 0); /* RTS0 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PA10, 0); /* CTS0 */
- if (pins & ATMEL_UART_DSR)
- at91_set_A_periph(AT91_PIN_PD14, 0); /* DSR0 */
- if (pins & ATMEL_UART_DTR)
- at91_set_A_periph(AT91_PIN_PD15, 0); /* DTR0 */
- if (pins & ATMEL_UART_DCD)
- at91_set_A_periph(AT91_PIN_PD16, 0); /* DCD0 */
- if (pins & ATMEL_UART_RI)
- at91_set_A_periph(AT91_PIN_PD17, 0); /* RI0 */
-}
-
-static struct resource uart1_resources[] = {
- [0] = {
- .start = AT91SAM9RL_BASE_US1,
- .end = AT91SAM9RL_BASE_US1 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US1,
- .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US1,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart1_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart1_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9rl_uart1_device = {
- .name = "atmel_usart",
- .id = 2,
- .dev = {
- .dma_mask = &uart1_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart1_data,
- },
- .resource = uart1_resources,
- .num_resources = ARRAY_SIZE(uart1_resources),
-};
-
-static inline void configure_usart1_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PA11, 1); /* TXD1 */
- at91_set_A_periph(AT91_PIN_PA12, 0); /* RXD1 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PA18, 0); /* RTS1 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PA19, 0); /* CTS1 */
-}
-
-static struct resource uart2_resources[] = {
- [0] = {
- .start = AT91SAM9RL_BASE_US2,
- .end = AT91SAM9RL_BASE_US2 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US2,
- .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US2,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart2_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart2_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9rl_uart2_device = {
- .name = "atmel_usart",
- .id = 3,
- .dev = {
- .dma_mask = &uart2_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart2_data,
- },
- .resource = uart2_resources,
- .num_resources = ARRAY_SIZE(uart2_resources),
-};
-
-static inline void configure_usart2_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PA13, 1); /* TXD2 */
- at91_set_A_periph(AT91_PIN_PA14, 0); /* RXD2 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_A_periph(AT91_PIN_PA29, 0); /* RTS2 */
- if (pins & ATMEL_UART_CTS)
- at91_set_A_periph(AT91_PIN_PA30, 0); /* CTS2 */
-}
-
-static struct resource uart3_resources[] = {
- [0] = {
- .start = AT91SAM9RL_BASE_US3,
- .end = AT91SAM9RL_BASE_US3 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .start = NR_IRQS_LEGACY + AT91SAM9RL_ID_US3,
- .end = NR_IRQS_LEGACY + AT91SAM9RL_ID_US3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct atmel_uart_data uart3_data = {
- .use_dma_tx = 1,
- .use_dma_rx = 1,
-};
-
-static u64 uart3_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device at91sam9rl_uart3_device = {
- .name = "atmel_usart",
- .id = 4,
- .dev = {
- .dma_mask = &uart3_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &uart3_data,
- },
- .resource = uart3_resources,
- .num_resources = ARRAY_SIZE(uart3_resources),
-};
-
-static inline void configure_usart3_pins(unsigned pins)
-{
- at91_set_A_periph(AT91_PIN_PB0, 1); /* TXD3 */
- at91_set_A_periph(AT91_PIN_PB1, 0); /* RXD3 */
-
- if (pins & ATMEL_UART_RTS)
- at91_set_B_periph(AT91_PIN_PD4, 0); /* RTS3 */
- if (pins & ATMEL_UART_CTS)
- at91_set_B_periph(AT91_PIN_PD3, 0); /* CTS3 */
-}
-
-static struct platform_device *__initdata at91_uarts[ATMEL_MAX_UART]; /* the UARTs to use */
-
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins)
-{
- struct platform_device *pdev;
- struct atmel_uart_data *pdata;
-
- switch (id) {
- case 0: /* DBGU */
- pdev = &at91sam9rl_dbgu_device;
- configure_dbgu_pins();
- break;
- case AT91SAM9RL_ID_US0:
- pdev = &at91sam9rl_uart0_device;
- configure_usart0_pins(pins);
- break;
- case AT91SAM9RL_ID_US1:
- pdev = &at91sam9rl_uart1_device;
- configure_usart1_pins(pins);
- break;
- case AT91SAM9RL_ID_US2:
- pdev = &at91sam9rl_uart2_device;
- configure_usart2_pins(pins);
- break;
- case AT91SAM9RL_ID_US3:
- pdev = &at91sam9rl_uart3_device;
- configure_usart3_pins(pins);
- break;
- default:
- return;
- }
- pdata = pdev->dev.platform_data;
- pdata->num = portnr; /* update to mapped ID */
-
- if (portnr < ATMEL_MAX_UART)
- at91_uarts[portnr] = pdev;
-}
-
-void __init at91_add_device_serial(void)
-{
- int i;
-
- for (i = 0; i < ATMEL_MAX_UART; i++) {
- if (at91_uarts[i])
- platform_device_register(at91_uarts[i]);
- }
-}
-#else
-void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {}
-void __init at91_add_device_serial(void) {}
-#endif
-
-
-/* -------------------------------------------------------------------- */
-
-/*
- * These devices are always present and don't need any board-specific
- * setup.
- */
-static int __init at91_add_standard_devices(void)
-{
- at91_add_device_hdmac();
- at91_add_device_rtc();
- at91_add_device_rtt();
- at91_add_device_watchdog();
- at91_add_device_tc();
- return 0;
-}
-
-arch_initcall(at91_add_standard_devices);
* Licensed under GPLv2 or later.
*/
-#include <linux/module.h>
-#include <linux/dma-mapping.h>
-#include <linux/clk/at91_pmc.h>
+#include <asm/system_misc.h>
+#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <mach/at91sam9x5.h>
-#include <mach/cpu.h>
-
-#include "board.h"
#include "soc.h"
#include "generic.h"
-#include "sam9_smc.h"
-
-#if defined(CONFIG_OLD_CLK_AT91)
-#include "clock.h"
-/* --------------------------------------------------------------------
- * Clocks
- * -------------------------------------------------------------------- */
-
-/*
- * The peripheral clocks.
- */
-static struct clk pioAB_clk = {
- .name = "pioAB_clk",
- .pmc_mask = 1 << AT91SAM9X5_ID_PIOAB,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pioCD_clk = {
- .name = "pioCD_clk",
- .pmc_mask = 1 << AT91SAM9X5_ID_PIOCD,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk smd_clk = {
- .name = "smd_clk",
- .pmc_mask = 1 << AT91SAM9X5_ID_SMD,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart0_clk = {
- .name = "usart0_clk",
- .pmc_mask = 1 << AT91SAM9X5_ID_USART0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart1_clk = {
- .name = "usart1_clk",
- .pmc_mask = 1 << AT91SAM9X5_ID_USART1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk usart2_clk = {
- .name = "usart2_clk",
- .pmc_mask = 1 << AT91SAM9X5_ID_USART2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-/* USART3 clock - Only for sam9g25/sam9x25 */
-static struct clk usart3_clk = {
- .name = "usart3_clk",
- .pmc_mask = 1 << AT91SAM9X5_ID_USART3,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi0_clk = {
- .name = "twi0_clk",
- .pmc_mask = 1 << AT91SAM9X5_ID_TWI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi1_clk = {
- .name = "twi1_clk",
- .pmc_mask = 1 << AT91SAM9X5_ID_TWI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk twi2_clk = {
- .name = "twi2_clk",
- .pmc_mask = 1 << AT91SAM9X5_ID_TWI2,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc0_clk = {
- .name = "mci0_clk",
- .pmc_mask = 1 << AT91SAM9X5_ID_MCI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi0_clk = {
- .name = "spi0_clk",
- .pmc_mask = 1 << AT91SAM9X5_ID_SPI0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk spi1_clk = {
- .name = "spi1_clk",
- .pmc_mask = 1 << AT91SAM9X5_ID_SPI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk uart0_clk = {
- .name = "uart0_clk",
- .pmc_mask = 1 << AT91SAM9X5_ID_UART0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk uart1_clk = {
- .name = "uart1_clk",
- .pmc_mask = 1 << AT91SAM9X5_ID_UART1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk tcb0_clk = {
- .name = "tcb0_clk",
- .pmc_mask = 1 << AT91SAM9X5_ID_TCB,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk pwm_clk = {
- .name = "pwm_clk",
- .pmc_mask = 1 << AT91SAM9X5_ID_PWM,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk adc_clk = {
- .name = "adc_clk",
- .pmc_mask = 1 << AT91SAM9X5_ID_ADC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk adc_op_clk = {
- .name = "adc_op_clk",
- .type = CLK_TYPE_PERIPHERAL,
- .rate_hz = 5000000,
-};
-static struct clk dma0_clk = {
- .name = "dma0_clk",
- .pmc_mask = 1 << AT91SAM9X5_ID_DMA0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk dma1_clk = {
- .name = "dma1_clk",
- .pmc_mask = 1 << AT91SAM9X5_ID_DMA1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk uhphs_clk = {
- .name = "uhphs",
- .pmc_mask = 1 << AT91SAM9X5_ID_UHPHS,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk udphs_clk = {
- .name = "udphs_clk",
- .pmc_mask = 1 << AT91SAM9X5_ID_UDPHS,
- .type = CLK_TYPE_PERIPHERAL,
-};
-/* emac0 clock - Only for sam9g25/sam9x25/sam9g35/sam9x35 */
-static struct clk macb0_clk = {
- .name = "pclk",
- .pmc_mask = 1 << AT91SAM9X5_ID_EMAC0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-/* lcd clock - Only for sam9g15/sam9g35/sam9x35 */
-static struct clk lcdc_clk = {
- .name = "lcdc_clk",
- .pmc_mask = 1 << AT91SAM9X5_ID_LCDC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-/* isi clock - Only for sam9g25 */
-static struct clk isi_clk = {
- .name = "isi_clk",
- .pmc_mask = 1 << AT91SAM9X5_ID_ISI,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk mmc1_clk = {
- .name = "mci1_clk",
- .pmc_mask = 1 << AT91SAM9X5_ID_MCI1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-/* emac1 clock - Only for sam9x25 */
-static struct clk macb1_clk = {
- .name = "pclk",
- .pmc_mask = 1 << AT91SAM9X5_ID_EMAC1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-static struct clk ssc_clk = {
- .name = "ssc_clk",
- .pmc_mask = 1 << AT91SAM9X5_ID_SSC,
- .type = CLK_TYPE_PERIPHERAL,
-};
-/* can0 clock - Only for sam9x35 */
-static struct clk can0_clk = {
- .name = "can0_clk",
- .pmc_mask = 1 << AT91SAM9X5_ID_CAN0,
- .type = CLK_TYPE_PERIPHERAL,
-};
-/* can1 clock - Only for sam9x35 */
-static struct clk can1_clk = {
- .name = "can1_clk",
- .pmc_mask = 1 << AT91SAM9X5_ID_CAN1,
- .type = CLK_TYPE_PERIPHERAL,
-};
-
-static struct clk *periph_clocks[] __initdata = {
- &pioAB_clk,
- &pioCD_clk,
- &smd_clk,
- &usart0_clk,
- &usart1_clk,
- &usart2_clk,
- &twi0_clk,
- &twi1_clk,
- &twi2_clk,
- &mmc0_clk,
- &spi0_clk,
- &spi1_clk,
- &uart0_clk,
- &uart1_clk,
- &tcb0_clk,
- &pwm_clk,
- &adc_clk,
- &adc_op_clk,
- &dma0_clk,
- &dma1_clk,
- &uhphs_clk,
- &udphs_clk,
- &mmc1_clk,
- &ssc_clk,
- // irq0
-};
-
-static struct clk_lookup periph_clocks_lookups[] = {
- /* lookup table for DT entries */
- CLKDEV_CON_DEV_ID("usart", "fffff200.serial", &mck),
- CLKDEV_CON_DEV_ID("usart", "f801c000.serial", &usart0_clk),
- CLKDEV_CON_DEV_ID("usart", "f8020000.serial", &usart1_clk),
- CLKDEV_CON_DEV_ID("usart", "f8024000.serial", &usart2_clk),
- CLKDEV_CON_DEV_ID("usart", "f8028000.serial", &usart3_clk),
- CLKDEV_CON_DEV_ID("usart", "f8040000.serial", &uart0_clk),
- CLKDEV_CON_DEV_ID("usart", "f8044000.serial", &uart1_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "f8008000.timer", &tcb0_clk),
- CLKDEV_CON_DEV_ID("t0_clk", "f800c000.timer", &tcb0_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "f0008000.mmc", &mmc0_clk),
- CLKDEV_CON_DEV_ID("mci_clk", "f000c000.mmc", &mmc1_clk),
- CLKDEV_CON_DEV_ID("dma_clk", "ffffec00.dma-controller", &dma0_clk),
- CLKDEV_CON_DEV_ID("dma_clk", "ffffee00.dma-controller", &dma1_clk),
- CLKDEV_CON_DEV_ID("pclk", "f0010000.ssc", &ssc_clk),
- CLKDEV_CON_DEV_ID(NULL, "f8010000.i2c", &twi0_clk),
- CLKDEV_CON_DEV_ID(NULL, "f8014000.i2c", &twi1_clk),
- CLKDEV_CON_DEV_ID(NULL, "f8018000.i2c", &twi2_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "f0000000.spi", &spi0_clk),
- CLKDEV_CON_DEV_ID("spi_clk", "f0004000.spi", &spi1_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff400.gpio", &pioAB_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff600.gpio", &pioAB_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffff800.gpio", &pioCD_clk),
- CLKDEV_CON_DEV_ID(NULL, "fffffa00.gpio", &pioCD_clk),
- /* additional fake clock for macb_hclk */
- CLKDEV_CON_DEV_ID("hclk", "f802c000.ethernet", &macb0_clk),
- CLKDEV_CON_DEV_ID("hclk", "f8030000.ethernet", &macb1_clk),
- CLKDEV_CON_DEV_ID("hclk", "600000.ohci", &uhphs_clk),
- CLKDEV_CON_DEV_ID("ohci_clk", "600000.ohci", &uhphs_clk),
- CLKDEV_CON_DEV_ID("ehci_clk", "700000.ehci", &uhphs_clk),
- CLKDEV_CON_DEV_ID("hclk", "500000.gadget", &utmi_clk),
- CLKDEV_CON_DEV_ID("pclk", "500000.gadget", &udphs_clk),
- CLKDEV_CON_DEV_ID(NULL, "f8034000.pwm", &pwm_clk),
-};
-
-/*
- * The two programmable clocks.
- * You must configure pin multiplexing to bring these signals out.
- */
-static struct clk pck0 = {
- .name = "pck0",
- .pmc_mask = AT91_PMC_PCK0,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 0,
-};
-static struct clk pck1 = {
- .name = "pck1",
- .pmc_mask = AT91_PMC_PCK1,
- .type = CLK_TYPE_PROGRAMMABLE,
- .id = 1,
-};
-
-static void __init at91sam9x5_register_clocks(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(periph_clocks); i++)
- clk_register(periph_clocks[i]);
-
- clkdev_add_table(periph_clocks_lookups,
- ARRAY_SIZE(periph_clocks_lookups));
-
- if (cpu_is_at91sam9g25()
- || cpu_is_at91sam9x25())
- clk_register(&usart3_clk);
-
- if (cpu_is_at91sam9g25()
- || cpu_is_at91sam9x25()
- || cpu_is_at91sam9g35()
- || cpu_is_at91sam9x35())
- clk_register(&macb0_clk);
-
- if (cpu_is_at91sam9g15()
- || cpu_is_at91sam9g35()
- || cpu_is_at91sam9x35())
- clk_register(&lcdc_clk);
-
- if (cpu_is_at91sam9g25())
- clk_register(&isi_clk);
-
- if (cpu_is_at91sam9x25())
- clk_register(&macb1_clk);
-
- if (cpu_is_at91sam9x25()
- || cpu_is_at91sam9x35()) {
- clk_register(&can0_clk);
- clk_register(&can1_clk);
- }
-
- clk_register(&pck0);
- clk_register(&pck1);
-}
-#else
-#define at91sam9x5_register_clocks NULL
-#endif
/* --------------------------------------------------------------------
* AT91SAM9x5 processor initialization
AT91_SOC_START(at91sam9x5)
.map_io = at91sam9x5_map_io,
- .register_clocks = at91sam9x5_register_clocks,
.init = at91sam9x5_initialize,
AT91_SOC_END
+++ /dev/null
-/*
- * arch/arm/mach-at91/at91x40.c
- *
- * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <asm/proc-fns.h>
-#include <asm/system_misc.h>
-#include <asm/mach/arch.h>
-#include <mach/at91x40.h>
-#include <mach/at91_st.h>
-#include <mach/hardware.h>
-
-#include "at91_aic.h"
-#include "generic.h"
-
-/*
- * Export the clock functions for the AT91X40. Some external code common
- * to all AT91 family parts relys on this, like the gpio and serial support.
- */
-int clk_enable(struct clk *clk)
-{
- return 0;
-}
-
-void clk_disable(struct clk *clk)
-{
-}
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- return AT91X40_MASTER_CLOCK;
-}
-
-static void at91x40_idle(void)
-{
- /*
- * Disable the processor clock. The processor will be automatically
- * re-enabled by an interrupt or by a reset.
- */
- __raw_writel(AT91_PS_CR_CPU, AT91_IO_P2V(AT91_PS_CR));
- cpu_do_idle();
-}
-
-void __init at91x40_initialize(unsigned long main_clock)
-{
- arm_pm_idle = at91x40_idle;
-}
-
-/*
- * The default interrupt priority levels (0 = lowest, 7 = highest).
- */
-static unsigned int at91x40_default_irq_priority[NR_AIC_IRQS] __initdata = {
- 7, /* Advanced Interrupt Controller (FIQ) */
- 0, /* System Peripherals */
- 0, /* USART 0 */
- 0, /* USART 1 */
- 2, /* Timer Counter 0 */
- 2, /* Timer Counter 1 */
- 2, /* Timer Counter 2 */
- 0, /* Watchdog timer */
- 0, /* Parallel IO Controller A */
- 0, /* Reserved */
- 0, /* Reserved */
- 0, /* Reserved */
- 0, /* Reserved */
- 0, /* Reserved */
- 0, /* Reserved */
- 0, /* Reserved */
- 0, /* External IRQ0 */
- 0, /* External IRQ1 */
- 0, /* External IRQ2 */
-};
-
-void __init at91x40_init_interrupts(unsigned int priority[NR_AIC_IRQS])
-{
- u32 extern_irq = (1 << AT91X40_ID_IRQ0) | (1 << AT91X40_ID_IRQ1)
- | (1 << AT91X40_ID_IRQ2);
- if (!priority)
- priority = at91x40_default_irq_priority;
-
- at91_aic_init(priority, extern_irq);
-}
+++ /dev/null
-/*
- * arch/arm/mach-at91/at91x40_time.c
- *
- * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/time.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/at91x40.h>
-#include <asm/mach/time.h>
-
-#include "at91_tc.h"
-
-#define at91_tc_read(field) \
- __raw_readl(AT91_IO_P2V(AT91_TC) + field)
-
-#define at91_tc_write(field, value) \
- __raw_writel(value, AT91_IO_P2V(AT91_TC) + field)
-
-/*
- * 3 counter/timer units present.
- */
-#define AT91_TC_CLK0BASE 0
-#define AT91_TC_CLK1BASE 0x40
-#define AT91_TC_CLK2BASE 0x80
-
-static u32 at91x40_gettimeoffset(void)
-{
- return (at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_CV) * 1000000 /
- (AT91X40_MASTER_CLOCK / 128)) * 1000;
-}
-
-static irqreturn_t at91x40_timer_interrupt(int irq, void *dev_id)
-{
- at91_tc_read(AT91_TC_CLK1BASE + AT91_TC_SR);
- timer_tick();
- return IRQ_HANDLED;
-}
-
-static struct irqaction at91x40_timer_irq = {
- .name = "at91_tick",
- .flags = IRQF_TIMER,
- .handler = at91x40_timer_interrupt
-};
-
-void __init at91x40_timer_init(void)
-{
- unsigned int v;
-
- arch_gettimeoffset = at91x40_gettimeoffset;
-
- at91_tc_write(AT91_TC_BCR, 0);
- v = at91_tc_read(AT91_TC_BMR);
- v = (v & ~AT91_TC_TC1XC1S) | AT91_TC_TC1XC1S_NONE;
- at91_tc_write(AT91_TC_BMR, v);
-
- at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, AT91_TC_CLKDIS);
- at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CMR, (AT91_TC_TIMER_CLOCK4 | AT91_TC_CPCTRG));
- at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_IDR, 0xffffffff);
- at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_RC, (AT91X40_MASTER_CLOCK / 128) / HZ - 1);
- at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_IER, (1<<4));
-
- setup_irq(AT91X40_ID_TC1, &at91x40_timer_irq);
-
- at91_tc_write(AT91_TC_CLK1BASE + AT91_TC_CCR, (AT91_TC_SWTRG | AT91_TC_CLKEN));
-}
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/board-1arm.c
- *
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/cpu.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-static void __init onearm_init_early(void)
-{
- /* Set cpu type: PQFP */
- at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata onearm_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-};
-
-static struct at91_usbh_data __initdata onearm_usbh_data = {
- .ports = 1,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata onearm_udc_data = {
- .vbus_pin = AT91_PIN_PC2,
- .pullup_pin = AT91_PIN_PC3,
-};
-
-static void __init onearm_board_init(void)
-{
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* USART1 on ttyS2 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&onearm_eth_data);
- /* USB Host */
- at91_add_device_usbh(&onearm_usbh_data);
- /* USB Device */
- at91_add_device_udc(&onearm_udc_data);
-}
-
-MACHINE_START(ONEARM, "Ajeco 1ARM single board computer")
- /* Maintainer: Lennert Buytenhek <buytenh@wantstofly.org> */
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = onearm_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = onearm_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/board-afeb-9260v1.c
- *
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2006 Atmel
- * Copyright (C) 2008 Sergey Lapin
- *
- * A custom board designed as open hardware; PCBs and various information
- * is available at http://groups.google.com/group/arm9fpga-evolution-board/
- * Subversion repository: svn://194.85.238.22/home/users/george/svn/arm9eb
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/clk.h>
-#include <linux/dma-mapping.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init afeb9260_init_early(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata afeb9260_usbh_data = {
- .ports = 1,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata afeb9260_udc_data = {
- .vbus_pin = AT91_PIN_PC5,
- .pullup_pin = -EINVAL, /* pull-up driven by UDC */
-};
-
-
-
-/*
- * SPI devices.
- */
-static struct spi_board_info afeb9260_spi_devices[] = {
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 1,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata afeb9260_macb_data = {
- .phy_irq_pin = AT91_PIN_PA9,
- .is_rmii = 0,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata afeb9260_nand_partition[] = {
- {
- .name = "bootloader",
- .offset = 0,
- .size = (640 * SZ_1K),
- },
- {
- .name = "kernel",
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_2M,
- },
- {
- .name = "rootfs",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct atmel_nand_data __initdata afeb9260_nand_data = {
- .ale = 21,
- .cle = 22,
- .rdy_pin = AT91_PIN_PC13,
- .enable_pin = AT91_PIN_PC14,
- .bus_width_16 = 0,
- .ecc_mode = NAND_ECC_SOFT,
- .parts = afeb9260_nand_partition,
- .num_parts = ARRAY_SIZE(afeb9260_nand_partition),
- .det_pin = -EINVAL,
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct mci_platform_data __initdata afeb9260_mci0_data = {
- .slot[1] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PC9,
- .wp_pin = AT91_PIN_PC4,
- },
-};
-
-
-
-static struct i2c_board_info __initdata afeb9260_i2c_devices[] = {
- {
- I2C_BOARD_INFO("tlv320aic23", 0x1a),
- }, {
- I2C_BOARD_INFO("fm3130", 0x68),
- }, {
- I2C_BOARD_INFO("24c64", 0x50),
- },
-};
-
-/*
- * IDE (CF True IDE mode)
- */
-static struct at91_cf_data afeb9260_cf_data = {
- .chipselect = 4,
- .irq_pin = AT91_PIN_PA6,
- .det_pin = -EINVAL,
- .vcc_pin = -EINVAL,
- .rst_pin = AT91_PIN_PA7,
- .flags = AT91_CF_TRUE_IDE,
-};
-
-static void __init afeb9260_board_init(void)
-{
- at91_register_devices();
-
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1,
- ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR
- | ATMEL_UART_DCD | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2,
- ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&afeb9260_usbh_data);
- /* USB Device */
- at91_add_device_udc(&afeb9260_udc_data);
- /* SPI */
- at91_add_device_spi(afeb9260_spi_devices,
- ARRAY_SIZE(afeb9260_spi_devices));
- /* NAND */
- at91_add_device_nand(&afeb9260_nand_data);
- /* Ethernet */
- at91_add_device_eth(&afeb9260_macb_data);
-
- /* Standard function's pin assignments are not
- * appropriate for us and generic code provide
- * no API to configure these pins any other way */
- at91_set_B_periph(AT91_PIN_PA10, 0); /* ETX2 */
- at91_set_B_periph(AT91_PIN_PA11, 0); /* ETX3 */
- /* MMC */
- at91_add_device_mci(0, &afeb9260_mci0_data);
- /* I2C */
- at91_add_device_i2c(afeb9260_i2c_devices,
- ARRAY_SIZE(afeb9260_i2c_devices));
- /* Audio */
- at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
- /* IDE */
- at91_add_device_cf(&afeb9260_cf_data);
-}
-
-MACHINE_START(AFEB9260, "Custom afeb9260 board")
- /* Maintainer: Sergey Lapin <slapin@ossfans.org> */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = afeb9260_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = afeb9260_board_init,
-MACHINE_END
-
+++ /dev/null
-/*
- * KwikByte CAM60 (KB9260)
- *
- * based on board-sam9260ek.c
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2006 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/at91sam9_smc.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init cam60_init_early(void)
-{
- /* Initialize processor: 10 MHz crystal */
- at91_initialize(10000000);
-}
-
-/*
- * USB Host
- */
-static struct at91_usbh_data __initdata cam60_usbh_data = {
- .ports = 1,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-
-/*
- * SPI devices.
- */
-#if defined(CONFIG_MTD_DATAFLASH)
-static struct mtd_partition cam60_spi_partitions[] = {
- {
- .name = "BOOT1",
- .offset = 0,
- .size = 4 * 1056,
- },
- {
- .name = "BOOT2",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 256 * 1056,
- },
- {
- .name = "kernel",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 2222 * 1056,
- },
- {
- .name = "file system",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct flash_platform_data cam60_spi_flash_platform_data = {
- .name = "spi_flash",
- .parts = cam60_spi_partitions,
- .nr_parts = ARRAY_SIZE(cam60_spi_partitions)
-};
-#endif
-
-static struct spi_board_info cam60_spi_devices[] __initdata = {
-#if defined(CONFIG_MTD_DATAFLASH)
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- .platform_data = &cam60_spi_flash_platform_data
- },
-#endif
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data cam60_macb_data __initdata = {
- .phy_irq_pin = AT91_PIN_PB5,
- .is_rmii = 0,
-};
-
-
-/*
- * NAND Flash
- */
-static struct mtd_partition __initdata cam60_nand_partition[] = {
- {
- .name = "nand_fs",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct atmel_nand_data __initdata cam60_nand_data = {
- .ale = 21,
- .cle = 22,
- .det_pin = -EINVAL,
- .rdy_pin = AT91_PIN_PA9,
- .enable_pin = AT91_PIN_PA7,
- .ecc_mode = NAND_ECC_SOFT,
- .parts = cam60_nand_partition,
- .num_parts = ARRAY_SIZE(cam60_nand_partition),
-};
-
-static struct sam9_smc_config __initdata cam60_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 1,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 3,
- .nrd_pulse = 3,
- .ncs_write_pulse = 3,
- .nwe_pulse = 3,
-
- .read_cycle = 5,
- .write_cycle = 5,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
- .tdf_cycles = 2,
-};
-
-static void __init cam60_add_device_nand(void)
-{
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(0, 3, &cam60_nand_smc_config);
-
- at91_add_device_nand(&cam60_nand_data);
-}
-
-
-static void __init cam60_board_init(void)
-{
- at91_register_devices();
-
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
- at91_add_device_serial();
- /* SPI */
- at91_add_device_spi(cam60_spi_devices, ARRAY_SIZE(cam60_spi_devices));
- /* Ethernet */
- at91_add_device_eth(&cam60_macb_data);
- /* USB Host */
- /* enable USB power supply circuit */
- at91_set_gpio_output(AT91_PIN_PB18, 1);
- at91_add_device_usbh(&cam60_usbh_data);
- /* NAND */
- cam60_add_device_nand();
-}
-
-MACHINE_START(CAM60, "KwikByte CAM60")
- /* Maintainer: KwikByte */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = cam60_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = cam60_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/board-carmeva.c
- *
- * Copyright (c) 2005 Peer Georgi
- * Conitec Datasystems
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init carmeva_init_early(void)
-{
- /* Initialize processor: 20.000 MHz crystal */
- at91_initialize(20000000);
-}
-
-static struct macb_platform_data __initdata carmeva_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-};
-
-static struct at91_usbh_data __initdata carmeva_usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata carmeva_udc_data = {
- .vbus_pin = AT91_PIN_PD12,
- .pullup_pin = AT91_PIN_PD9,
-};
-
-/* FIXME: user dependent */
-// static struct at91_cf_data __initdata carmeva_cf_data = {
-// .det_pin = AT91_PIN_PB0,
-// .rst_pin = AT91_PIN_PC5,
- // .irq_pin = -EINVAL,
- // .vcc_pin = -EINVAL,
-// };
-
-static struct mci_platform_data __initdata carmeva_mci0_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PB10,
- .wp_pin = AT91_PIN_PC14,
- },
-};
-
-static struct spi_board_info carmeva_spi_devices[] = {
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 10 * 1000 * 1000,
- },
- { /* User accessible spi - cs1 (250KHz) */
- .modalias = "spi-cs1",
- .chip_select = 1,
- .max_speed_hz = 250 * 1000,
- },
- { /* User accessible spi - cs2 (1MHz) */
- .modalias = "spi-cs2",
- .chip_select = 2,
- .max_speed_hz = 1 * 1000 * 1000,
- },
- { /* User accessible spi - cs3 (10MHz) */
- .modalias = "spi-cs3",
- .chip_select = 3,
- .max_speed_hz = 10 * 1000 * 1000,
- },
-};
-
-static struct gpio_led carmeva_leds[] = {
- { /* "user led 1", LED9 */
- .name = "led9",
- .gpio = AT91_PIN_PA21,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
- { /* "user led 2", LED10 */
- .name = "led10",
- .gpio = AT91_PIN_PA25,
- .active_low = 1,
- },
- { /* "user led 3", LED11 */
- .name = "led11",
- .gpio = AT91_PIN_PA26,
- .active_low = 1,
- },
- { /* "user led 4", LED12 */
- .name = "led12",
- .gpio = AT91_PIN_PA18,
- .active_low = 1,
- }
-};
-
-static void __init carmeva_board_init(void)
-{
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&carmeva_eth_data);
- /* USB Host */
- at91_add_device_usbh(&carmeva_usbh_data);
- /* USB Device */
- at91_add_device_udc(&carmeva_udc_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* SPI */
- at91_add_device_spi(carmeva_spi_devices, ARRAY_SIZE(carmeva_spi_devices));
- /* Compact Flash */
-// at91_add_device_cf(&carmeva_cf_data);
- /* MMC */
- at91_add_device_mci(0, &carmeva_mci0_data);
- /* LEDs */
- at91_gpio_leds(carmeva_leds, ARRAY_SIZE(carmeva_leds));
-}
-
-MACHINE_START(CARMEVA, "Carmeva")
- /* Maintainer: Conitec Datasystems */
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = carmeva_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = carmeva_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/board-cpu9krea.c
- *
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2006 Atmel
- * Copyright (C) 2009 Eric Benard - eric@eukrea.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/clk.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/at91sam9260_matrix.h>
-#include <mach/at91_matrix.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-#include "gpio.h"
-
-static void __init cpu9krea_init_early(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata cpu9krea_usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata cpu9krea_udc_data = {
- .vbus_pin = AT91_PIN_PC8,
- .pullup_pin = -EINVAL, /* pull-up driven by UDC */
-};
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata cpu9krea_macb_data = {
- .phy_irq_pin = -EINVAL,
- .is_rmii = 1,
-};
-
-/*
- * NAND flash
- */
-static struct atmel_nand_data __initdata cpu9krea_nand_data = {
- .ale = 21,
- .cle = 22,
- .rdy_pin = AT91_PIN_PC13,
- .enable_pin = AT91_PIN_PC14,
- .bus_width_16 = 0,
- .det_pin = -EINVAL,
- .ecc_mode = NAND_ECC_SOFT,
-};
-
-#ifdef CONFIG_MACH_CPU9260
-static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 1,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 3,
- .nrd_pulse = 3,
- .ncs_write_pulse = 3,
- .nwe_pulse = 3,
-
- .read_cycle = 5,
- .write_cycle = 5,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
- | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
- .tdf_cycles = 2,
-};
-#else
-static struct sam9_smc_config __initdata cpu9krea_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 2,
- .ncs_write_setup = 0,
- .nwe_setup = 2,
-
- .ncs_read_pulse = 4,
- .nrd_pulse = 4,
- .ncs_write_pulse = 4,
- .nwe_pulse = 4,
-
- .read_cycle = 7,
- .write_cycle = 7,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
- | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
- .tdf_cycles = 3,
-};
-#endif
-
-static void __init cpu9krea_add_device_nand(void)
-{
- sam9_smc_configure(0, 3, &cpu9krea_nand_smc_config);
- at91_add_device_nand(&cpu9krea_nand_data);
-}
-
-/*
- * NOR flash
- */
-static struct physmap_flash_data cpuat9260_nor_data = {
- .width = 2,
-};
-
-#define NOR_BASE AT91_CHIPSELECT_0
-#define NOR_SIZE SZ_64M
-
-static struct resource nor_flash_resources[] = {
- {
- .start = NOR_BASE,
- .end = NOR_BASE + NOR_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device cpu9krea_nor_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &cpuat9260_nor_data,
- },
- .resource = nor_flash_resources,
- .num_resources = ARRAY_SIZE(nor_flash_resources),
-};
-
-#ifdef CONFIG_MACH_CPU9260
-static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 1,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 10,
- .nrd_pulse = 10,
- .ncs_write_pulse = 6,
- .nwe_pulse = 6,
-
- .read_cycle = 12,
- .write_cycle = 8,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
- | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
- | AT91_SMC_DBW_16,
- .tdf_cycles = 2,
-};
-#else
-static struct sam9_smc_config __initdata cpu9krea_nor_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 1,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 13,
- .nrd_pulse = 13,
- .ncs_write_pulse = 8,
- .nwe_pulse = 8,
-
- .read_cycle = 15,
- .write_cycle = 10,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
- | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE
- | AT91_SMC_DBW_16,
- .tdf_cycles = 2,
-};
-#endif
-
-static __init void cpu9krea_add_device_nor(void)
-{
- unsigned long csa;
-
- csa = at91_matrix_read(AT91_MATRIX_EBICSA);
- at91_matrix_write(AT91_MATRIX_EBICSA, csa | AT91_MATRIX_VDDIOMSEL_3_3V);
-
- /* configure chip-select 0 (NOR) */
- sam9_smc_configure(0, 0, &cpu9krea_nor_smc_config);
-
- platform_device_register(&cpu9krea_nor_flash);
-}
-
-/*
- * LEDs
- */
-static struct gpio_led cpu9krea_leds[] = {
- { /* LED1 */
- .name = "LED1",
- .gpio = AT91_PIN_PC11,
- .active_low = 1,
- .default_trigger = "timer",
- },
- { /* LED2 */
- .name = "LED2",
- .gpio = AT91_PIN_PC12,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
- { /* LED3 */
- .name = "LED3",
- .gpio = AT91_PIN_PC7,
- .active_low = 1,
- .default_trigger = "none",
- },
- { /* LED4 */
- .name = "LED4",
- .gpio = AT91_PIN_PC9,
- .active_low = 1,
- .default_trigger = "none",
- }
-};
-
-static struct i2c_board_info __initdata cpu9krea_i2c_devices[] = {
- {
- I2C_BOARD_INFO("ds1339", 0x68),
- },
-};
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button cpu9krea_buttons[] = {
- {
- .gpio = AT91_PIN_PC3,
- .code = BTN_0,
- .desc = "BP1",
- .active_low = 1,
- .wakeup = 1,
- },
- {
- .gpio = AT91_PIN_PB20,
- .code = BTN_1,
- .desc = "BP2",
- .active_low = 1,
- .wakeup = 1,
- }
-};
-
-static struct gpio_keys_platform_data cpu9krea_button_data = {
- .buttons = cpu9krea_buttons,
- .nbuttons = ARRAY_SIZE(cpu9krea_buttons),
-};
-
-static struct platform_device cpu9krea_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &cpu9krea_button_data,
- }
-};
-
-static void __init cpu9krea_add_device_buttons(void)
-{
- at91_set_gpio_input(AT91_PIN_PC3, 1); /* BP1 */
- at91_set_deglitch(AT91_PIN_PC3, 1);
- at91_set_gpio_input(AT91_PIN_PB20, 1); /* BP2 */
- at91_set_deglitch(AT91_PIN_PB20, 1);
-
- platform_device_register(&cpu9krea_button_device);
-}
-#else
-static void __init cpu9krea_add_device_buttons(void)
-{
-}
-#endif
-
-/*
- * MCI (SD/MMC)
- */
-static struct mci_platform_data __initdata cpu9krea_mci0_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PA29,
- .wp_pin = -EINVAL,
- },
-};
-
-static void __init cpu9krea_board_init(void)
-{
- at91_register_devices();
-
- /* NOR */
- cpu9krea_add_device_nor();
- /* Serial */
- /* DGBU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS |
- ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
- ATMEL_UART_DCD | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS |
- ATMEL_UART_RTS);
-
- /* USART2 on ttyS3. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS |
- ATMEL_UART_RTS);
-
- /* USART3 on ttyS4. (Rx, Tx) */
- at91_register_uart(AT91SAM9260_ID_US3, 4, 0);
-
- /* USART4 on ttyS5. (Rx, Tx) */
- at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
-
- /* USART5 on ttyS6. (Rx, Tx) */
- at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&cpu9krea_usbh_data);
- /* USB Device */
- at91_add_device_udc(&cpu9krea_udc_data);
- /* NAND */
- cpu9krea_add_device_nand();
- /* Ethernet */
- at91_add_device_eth(&cpu9krea_macb_data);
- /* MMC */
- at91_add_device_mci(0, &cpu9krea_mci0_data);
- /* I2C */
- at91_add_device_i2c(cpu9krea_i2c_devices,
- ARRAY_SIZE(cpu9krea_i2c_devices));
- /* LEDs */
- at91_gpio_leds(cpu9krea_leds, ARRAY_SIZE(cpu9krea_leds));
- /* Push Buttons */
- cpu9krea_add_device_buttons();
-}
-
-#ifdef CONFIG_MACH_CPU9260
-MACHINE_START(CPUAT9260, "Eukrea CPU9260")
-#else
-MACHINE_START(CPUAT9G20, "Eukrea CPU9G20")
-#endif
- /* Maintainer: Eric Benard - EUKREA Electromatique */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = cpu9krea_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = cpu9krea_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/board-cpuat91.c
- *
- * Copyright (C) 2009 Eric Benard - eric@eukrea.com
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mtd/plat-ram.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-#include <mach/cpu.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static struct gpio_led cpuat91_leds[] = {
- {
- .name = "led1",
- .default_trigger = "heartbeat",
- .active_low = 1,
- .gpio = AT91_PIN_PC0,
- },
-};
-
-static void __init cpuat91_init_early(void)
-{
- /* Set cpu type: PQFP */
- at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata cpuat91_eth_data = {
- .phy_irq_pin = -EINVAL,
- .is_rmii = 1,
-};
-
-static struct at91_usbh_data __initdata cpuat91_usbh_data = {
- .ports = 1,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata cpuat91_udc_data = {
- .vbus_pin = AT91_PIN_PC15,
- .pullup_pin = AT91_PIN_PC14,
-};
-
-static struct mci_platform_data __initdata cpuat91_mci0_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PC2,
- .wp_pin = -EINVAL,
- },
-};
-
-static struct physmap_flash_data cpuat91_flash_data = {
- .width = 2,
-};
-
-static struct resource cpuat91_flash_resource = {
- .start = AT91_CHIPSELECT_0,
- .end = AT91_CHIPSELECT_0 + SZ_16M - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device cpuat91_norflash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &cpuat91_flash_data,
- },
- .resource = &cpuat91_flash_resource,
- .num_resources = 1,
-};
-
-#ifdef CONFIG_MTD_PLATRAM
-struct platdata_mtd_ram at91_sram_pdata = {
- .mapname = "SRAM",
- .bankwidth = 2,
-};
-
-static struct resource at91_sram_resource[] = {
- [0] = {
- .start = AT91RM9200_SRAM_BASE,
- .end = AT91RM9200_SRAM_BASE + AT91RM9200_SRAM_SIZE - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device at91_sram = {
- .name = "mtd-ram",
- .id = 0,
- .resource = at91_sram_resource,
- .num_resources = ARRAY_SIZE(at91_sram_resource),
- .dev = {
- .platform_data = &at91_sram_pdata,
- },
-};
-#endif /* MTD_PLATRAM */
-
-static struct platform_device *platform_devices[] __initdata = {
- &cpuat91_norflash,
-#ifdef CONFIG_MTD_PLATRAM
- &at91_sram,
-#endif /* CONFIG_MTD_PLATRAM */
-};
-
-static void __init cpuat91_board_init(void)
-{
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS |
- ATMEL_UART_RTS);
-
- /* USART1 on ttyS2. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 2, ATMEL_UART_CTS |
- ATMEL_UART_RTS | ATMEL_UART_DTR | ATMEL_UART_DSR |
- ATMEL_UART_DCD | ATMEL_UART_RI);
-
- /* USART2 on ttyS3 (Rx, Tx) */
- at91_register_uart(AT91RM9200_ID_US2, 3, 0);
-
- /* USART3 on ttyS4 (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91RM9200_ID_US3, 4, ATMEL_UART_CTS |
- ATMEL_UART_RTS);
- at91_add_device_serial();
- /* LEDs. */
- at91_gpio_leds(cpuat91_leds, ARRAY_SIZE(cpuat91_leds));
- /* Ethernet */
- at91_add_device_eth(&cpuat91_eth_data);
- /* USB Host */
- at91_add_device_usbh(&cpuat91_usbh_data);
- /* USB Device */
- at91_add_device_udc(&cpuat91_udc_data);
- /* MMC */
- at91_add_device_mci(0, &cpuat91_mci0_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* Platform devices */
- platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
-}
-
-MACHINE_START(CPUAT91, "Eukrea")
- /* Maintainer: Eric Benard - EUKREA Electromatique */
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = cpuat91_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = cpuat91_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/board-csb337.c
- *
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/physmap.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-static void __init csb337_init_early(void)
-{
- /* Initialize processor: 3.6864 MHz crystal */
- at91_initialize(3686400);
-}
-
-static struct macb_platform_data __initdata csb337_eth_data = {
- .phy_irq_pin = AT91_PIN_PC2,
- .is_rmii = 0,
- /* The CSB337 bootloader stores the MAC the wrong-way around */
- .rev_eth_addr = 1,
-};
-
-static struct at91_usbh_data __initdata csb337_usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata csb337_udc_data = {
- .pullup_pin = AT91_PIN_PA24,
- .vbus_pin = -EINVAL,
-};
-
-static struct i2c_board_info __initdata csb337_i2c_devices[] = {
- {
- I2C_BOARD_INFO("ds1307", 0x68),
- },
-};
-
-static struct at91_cf_data __initdata csb337_cf_data = {
- /*
- * connector P4 on the CSB 337 mates to
- * connector P8 on the CSB 300CF
- */
-
- /* CSB337 specific */
- .det_pin = AT91_PIN_PC3,
-
- /* CSB300CF specific */
- .irq_pin = AT91_PIN_PA19,
- .vcc_pin = AT91_PIN_PD0,
- .rst_pin = AT91_PIN_PD2,
-};
-
-static struct mci_platform_data __initdata csb337_mci0_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PD5,
- .wp_pin = AT91_PIN_PD6,
- },
-};
-
-static struct spi_board_info csb337_spi_devices[] = {
- { /* CAN controller */
- .modalias = "sak82c900",
- .chip_select = 0,
- .max_speed_hz = 6 * 1000 * 1000,
- },
-};
-
-#define CSB_FLASH_BASE AT91_CHIPSELECT_0
-#define CSB_FLASH_SIZE SZ_8M
-
-static struct mtd_partition csb_flash_partitions[] = {
- {
- .name = "uMON flash",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = MTD_WRITEABLE, /* read only */
- }
-};
-
-static struct physmap_flash_data csb_flash_data = {
- .width = 2,
- .parts = csb_flash_partitions,
- .nr_parts = ARRAY_SIZE(csb_flash_partitions),
-};
-
-static struct resource csb_flash_resources[] = {
- {
- .start = CSB_FLASH_BASE,
- .end = CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device csb_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &csb_flash_data,
- },
- .resource = csb_flash_resources,
- .num_resources = ARRAY_SIZE(csb_flash_resources),
-};
-
-/*
- * GPIO Buttons (on CSB300)
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button csb300_buttons[] = {
- {
- .gpio = AT91_PIN_PB29,
- .code = BTN_0,
- .desc = "sw0",
- .active_low = 1,
- .wakeup = 1,
- },
- {
- .gpio = AT91_PIN_PB28,
- .code = BTN_1,
- .desc = "sw1",
- .active_low = 1,
- .wakeup = 1,
- },
- {
- .gpio = AT91_PIN_PA21,
- .code = BTN_2,
- .desc = "sw2",
- .active_low = 1,
- .wakeup = 1,
- }
-};
-
-static struct gpio_keys_platform_data csb300_button_data = {
- .buttons = csb300_buttons,
- .nbuttons = ARRAY_SIZE(csb300_buttons),
-};
-
-static struct platform_device csb300_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &csb300_button_data,
- }
-};
-
-static void __init csb300_add_device_buttons(void)
-{
- at91_set_gpio_input(AT91_PIN_PB29, 1); /* sw0 */
- at91_set_deglitch(AT91_PIN_PB29, 1);
- at91_set_gpio_input(AT91_PIN_PB28, 1); /* sw1 */
- at91_set_deglitch(AT91_PIN_PB28, 1);
- at91_set_gpio_input(AT91_PIN_PA21, 1); /* sw2 */
- at91_set_deglitch(AT91_PIN_PA21, 1);
-
- platform_device_register(&csb300_button_device);
-}
-#else
-static void __init csb300_add_device_buttons(void) {}
-#endif
-
-static struct gpio_led csb_leds[] = {
- { /* "led0", yellow */
- .name = "led0",
- .gpio = AT91_PIN_PB2,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
- { /* "led1", green */
- .name = "led1",
- .gpio = AT91_PIN_PB1,
- .active_low = 1,
- .default_trigger = "mmc0",
- },
- { /* "led2", yellow */
- .name = "led2",
- .gpio = AT91_PIN_PB0,
- .active_low = 1,
- .default_trigger = "ide-disk",
- }
-};
-
-
-static void __init csb337_board_init(void)
-{
- /* Serial */
- /* DBGU on ttyS0 */
- at91_register_uart(0, 0, 0);
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&csb337_eth_data);
- /* USB Host */
- at91_add_device_usbh(&csb337_usbh_data);
- /* USB Device */
- at91_add_device_udc(&csb337_udc_data);
- /* I2C */
- at91_add_device_i2c(csb337_i2c_devices, ARRAY_SIZE(csb337_i2c_devices));
- /* Compact Flash */
- at91_set_gpio_input(AT91_PIN_PB22, 1); /* IOIS16 */
- at91_add_device_cf(&csb337_cf_data);
- /* SPI */
- at91_add_device_spi(csb337_spi_devices, ARRAY_SIZE(csb337_spi_devices));
- /* MMC */
- at91_add_device_mci(0, &csb337_mci0_data);
- /* NOR flash */
- platform_device_register(&csb_flash);
- /* LEDs */
- at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
- /* Switches on CSB300 */
- csb300_add_device_buttons();
-}
-
-MACHINE_START(CSB337, "Cogent CSB337")
- /* Maintainer: Bill Gatliff */
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = csb337_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = csb337_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/board-csb637.c
- *
- * Copyright (C) 2005 SAN People
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init csb637_init_early(void)
-{
- /* Initialize processor: 3.6864 MHz crystal */
- at91_initialize(3686400);
-}
-
-static struct macb_platform_data __initdata csb637_eth_data = {
- .phy_irq_pin = AT91_PIN_PC0,
- .is_rmii = 0,
-};
-
-static struct at91_usbh_data __initdata csb637_usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata csb637_udc_data = {
- .vbus_pin = AT91_PIN_PB28,
- .pullup_pin = AT91_PIN_PB1,
-};
-
-#define CSB_FLASH_BASE AT91_CHIPSELECT_0
-#define CSB_FLASH_SIZE SZ_16M
-
-static struct mtd_partition csb_flash_partitions[] = {
- {
- .name = "uMON flash",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = MTD_WRITEABLE, /* read only */
- }
-};
-
-static struct physmap_flash_data csb_flash_data = {
- .width = 2,
- .parts = csb_flash_partitions,
- .nr_parts = ARRAY_SIZE(csb_flash_partitions),
-};
-
-static struct resource csb_flash_resources[] = {
- {
- .start = CSB_FLASH_BASE,
- .end = CSB_FLASH_BASE + CSB_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device csb_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &csb_flash_data,
- },
- .resource = csb_flash_resources,
- .num_resources = ARRAY_SIZE(csb_flash_resources),
-};
-
-static struct gpio_led csb_leds[] = {
- { /* "d1", red */
- .name = "d1",
- .gpio = AT91_PIN_PB2,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
-};
-
-static void __init csb637_board_init(void)
-{
- /* LED(s) */
- at91_gpio_leds(csb_leds, ARRAY_SIZE(csb_leds));
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&csb637_eth_data);
- /* USB Host */
- at91_add_device_usbh(&csb637_usbh_data);
- /* USB Device */
- at91_add_device_udc(&csb637_udc_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* SPI */
- at91_add_device_spi(NULL, 0);
- /* NOR flash */
- platform_device_register(&csb_flash);
-}
-
-MACHINE_START(CSB637, "Cogent CSB637")
- /* Maintainer: Bill Gatliff */
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = csb637_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = csb637_board_init,
-MACHINE_END
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include "at91_aic.h"
#include "generic.h"
static void __init at91rm9200_dt_timer_init(void)
{
-#if defined(CONFIG_COMMON_CLK)
of_clk_init(NULL);
-#endif
at91rm9200_timer_init();
}
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include "at91_aic.h"
-#include "board.h"
#include "generic.h"
static const char *at91_dt_board_compat[] __initdata = {
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
-#include "at91_aic.h"
#include "generic.h"
static void __init sama5_dt_device_init(void)
+++ /dev/null
-/*
- * arch/arm/mach-at91/board-eb01.c
- *
- * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/irq.h>
-#include <asm/mach-types.h>
-#include <mach/hardware.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-
-static void __init at91eb01_init_irq(void)
-{
- at91x40_init_interrupts(NULL);
-}
-
-static void __init at91eb01_init_early(void)
-{
- at91x40_initialize(40000000);
-}
-
-MACHINE_START(AT91EB01, "Atmel AT91 EB01")
- /* Maintainer: Greg Ungerer <gerg@snapgear.com> */
- .init_time = at91x40_timer_init,
- .handle_irq = at91_aic_handle_irq,
- .init_early = at91eb01_init_early,
- .init_irq = at91eb01_init_irq,
-MACHINE_END
-
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/board-eb9200.c
- *
- * Copyright (C) 2005 SAN People, adapted for ATEB9200 from Embest
- * by Andrew Patrikalakis
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/device.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init eb9200_init_early(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata eb9200_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-};
-
-static struct at91_usbh_data __initdata eb9200_usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata eb9200_udc_data = {
- .vbus_pin = AT91_PIN_PD4,
- .pullup_pin = AT91_PIN_PD5,
-};
-
-static struct at91_cf_data __initdata eb9200_cf_data = {
- .irq_pin = -EINVAL,
- .det_pin = AT91_PIN_PB0,
- .vcc_pin = -EINVAL,
- .rst_pin = AT91_PIN_PC5,
-};
-
-static struct mci_platform_data __initdata eb9200_mci0_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = -EINVAL,
- .wp_pin = -EINVAL,
- },
-};
-
-static struct i2c_board_info __initdata eb9200_i2c_devices[] = {
- {
- I2C_BOARD_INFO("24c512", 0x50),
- },
-};
-
-
-static void __init eb9200_board_init(void)
-{
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART2 on ttyS2. (Rx, Tx) - IRDA */
- at91_register_uart(AT91RM9200_ID_US2, 2, 0);
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&eb9200_eth_data);
- /* USB Host */
- at91_add_device_usbh(&eb9200_usbh_data);
- /* USB Device */
- at91_add_device_udc(&eb9200_udc_data);
- /* I2C */
- at91_add_device_i2c(eb9200_i2c_devices, ARRAY_SIZE(eb9200_i2c_devices));
- /* Compact Flash */
- at91_add_device_cf(&eb9200_cf_data);
- /* SPI */
- at91_add_device_spi(NULL, 0);
- /* MMC */
- /* only supports 1 or 4 bit interface, not wired through to SPI */
- at91_add_device_mci(0, &eb9200_mci0_data);
-}
-
-MACHINE_START(ATEB9200, "Embest ATEB9200")
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = eb9200_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = eb9200_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91rm9200/board-ecbat91.c
- * Copyright (C) 2007 emQbit.com.
- *
- * We started from board-dk.c, which is Copyright (C) 2005 SAN People.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/flash.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/cpu.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init ecb_at91init_early(void)
-{
- /* Set cpu type: PQFP */
- at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata ecb_at91eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 0,
-};
-
-static struct at91_usbh_data __initdata ecb_at91usbh_data = {
- .ports = 1,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct mci_platform_data __initdata ecbat91_mci0_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = -EINVAL,
- .wp_pin = -EINVAL,
- },
-};
-
-
-#if defined(CONFIG_MTD_DATAFLASH)
-static struct mtd_partition __initdata my_flash0_partitions[] =
-{
- { /* 0x8400 */
- .name = "Darrell-loader",
- .offset = 0,
- .size = 12 * 1056,
- },
- {
- .name = "U-boot",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 110 * 1056,
- },
- { /* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */
- .name = "UBoot-env",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 8 * 1056,
- },
- { /* 1336 (167 blocks) pages * 1056 bytes = 0x158700 bytes */
- .name = "Kernel",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 1534 * 1056,
- },
- { /* 190200 - jffs2 root filesystem */
- .name = "Filesystem",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL, /* 26 sectors */
- }
-};
-
-static struct flash_platform_data __initdata my_flash0_platform = {
- .name = "Removable flash card",
- .parts = my_flash0_partitions,
- .nr_parts = ARRAY_SIZE(my_flash0_partitions)
-};
-
-#endif
-
-static struct spi_board_info __initdata ecb_at91spi_devices[] = {
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 10 * 1000 * 1000,
- .bus_num = 0,
-#if defined(CONFIG_MTD_DATAFLASH)
- .platform_data = &my_flash0_platform,
-#endif
- },
- { /* User accessible spi - cs1 (250KHz) */
- .modalias = "spi-cs1",
- .chip_select = 1,
- .max_speed_hz = 250 * 1000,
- },
- { /* User accessible spi - cs2 (1MHz) */
- .modalias = "spi-cs2",
- .chip_select = 2,
- .max_speed_hz = 1 * 1000 * 1000,
- },
- { /* User accessible spi - cs3 (10MHz) */
- .modalias = "spi-cs3",
- .chip_select = 3,
- .max_speed_hz = 10 * 1000 * 1000,
- },
-};
-
-/*
- * LEDs
- */
-static struct gpio_led ecb_leds[] = {
- { /* D1 */
- .name = "led1",
- .gpio = AT91_PIN_PC7,
- .active_low = 1,
- .default_trigger = "heartbeat",
- }
-};
-
-static void __init ecb_at91board_init(void)
-{
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx & Tx only) */
- at91_register_uart(AT91RM9200_ID_US0, 1, 0);
- at91_add_device_serial();
-
- /* Ethernet */
- at91_add_device_eth(&ecb_at91eth_data);
-
- /* USB Host */
- at91_add_device_usbh(&ecb_at91usbh_data);
-
- /* I2C */
- at91_add_device_i2c(NULL, 0);
-
- /* MMC */
- at91_add_device_mci(0, &ecbat91_mci0_data);
-
- /* SPI */
- at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices));
-
- /* LEDs */
- at91_gpio_leds(ecb_leds, ARRAY_SIZE(ecb_leds));
-}
-
-MACHINE_START(ECBAT91, "emQbit's ECB_AT91")
- /* Maintainer: emQbit.com */
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = ecb_at91init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ecb_at91board_init,
-MACHINE_END
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-#include <mach/cpu.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init eco920_init_early(void)
-{
- /* Set cpu type: PQFP */
- at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
- at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata eco920_eth_data = {
- .phy_irq_pin = AT91_PIN_PC2,
- .is_rmii = 1,
-};
-
-static struct at91_usbh_data __initdata eco920_usbh_data = {
- .ports = 1,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata eco920_udc_data = {
- .vbus_pin = AT91_PIN_PB12,
- .pullup_pin = AT91_PIN_PB13,
-};
-
-static struct mci_platform_data __initdata eco920_mci0_data = {
- .slot[0] = {
- .bus_width = 1,
- .detect_pin = -EINVAL,
- .wp_pin = -EINVAL,
- },
-};
-
-static struct physmap_flash_data eco920_flash_data = {
- .width = 2,
-};
-
-static struct resource eco920_flash_resource = {
- .start = 0x11000000,
- .end = 0x11ffffff,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device eco920_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &eco920_flash_data,
- },
- .resource = &eco920_flash_resource,
- .num_resources = 1,
-};
-
-static struct spi_board_info eco920_spi_devices[] = {
- { /* CAN controller */
- .modalias = "tlv5638",
- .chip_select = 3,
- .max_speed_hz = 20 * 1000 * 1000,
- .mode = SPI_CPHA,
- },
-};
-
-/*
- * LEDs
- */
-static struct gpio_led eco920_leds[] = {
- { /* D1 */
- .name = "led1",
- .gpio = AT91_PIN_PB0,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
- { /* D2 */
- .name = "led2",
- .gpio = AT91_PIN_PB1,
- .active_low = 1,
- .default_trigger = "timer",
- }
-};
-
-static void __init eco920_board_init(void)
-{
- /* DBGU on ttyS0. (Rx & Tx only */
- at91_register_uart(0, 0, 0);
- at91_add_device_serial();
- at91_add_device_eth(&eco920_eth_data);
- at91_add_device_usbh(&eco920_usbh_data);
- at91_add_device_udc(&eco920_udc_data);
-
- at91_add_device_mci(0, &eco920_mci0_data);
- platform_device_register(&eco920_flash);
-
- at91_ramc_write(0, AT91_SMC_CSR(7), AT91_SMC_RWHOLD_(1)
- | AT91_SMC_RWSETUP_(1)
- | AT91_SMC_DBW_8
- | AT91_SMC_WSEN
- | AT91_SMC_NWS_(15));
-
- at91_set_A_periph(AT91_PIN_PC6, 1);
-
- at91_set_gpio_input(AT91_PIN_PA23, 0);
- at91_set_deglitch(AT91_PIN_PA23, 1);
-
-/* Initialization of the Static Memory Controller for Chip Select 3 */
- at91_ramc_write(0, AT91_SMC_CSR(3),
- AT91_SMC_DBW_16 | /* 16 bit */
- AT91_SMC_WSEN |
- AT91_SMC_NWS_(5) | /* wait states */
- AT91_SMC_TDF_(1) /* float time */
- );
-
- at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices));
- /* LEDs */
- at91_gpio_leds(eco920_leds, ARRAY_SIZE(eco920_leds));
-}
-
-MACHINE_START(ECO920, "eco920")
- /* Maintainer: Sascha Hauer */
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = eco920_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = eco920_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/board-flexibity.c
- *
- * Copyright (C) 2010-2011 Flexibity
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2006 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/input.h>
-#include <linux/gpio.h>
-
-#include <asm/mach-types.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-static void __init flexibity_init_early(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-/* USB Host port */
-static struct at91_usbh_data __initdata flexibity_usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/* USB Device port */
-static struct at91_udc_data __initdata flexibity_udc_data = {
- .vbus_pin = AT91_PIN_PC5,
- .pullup_pin = -EINVAL, /* pull-up driven by UDC */
-};
-
-/* I2C devices */
-static struct i2c_board_info __initdata flexibity_i2c_devices[] = {
- {
- I2C_BOARD_INFO("ds1307", 0x68),
- },
-};
-
-/* SPI devices */
-static struct spi_board_info flexibity_spi_devices[] = {
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 1,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-};
-
-/* MCI (SD/MMC) */
-static struct mci_platform_data __initdata flexibity_mci0_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PC9,
- .wp_pin = AT91_PIN_PC4,
- },
-};
-
-/* LEDs */
-static struct gpio_led flexibity_leds[] = {
- {
- .name = "usb1:green",
- .gpio = AT91_PIN_PA12,
- .active_low = 1,
- .default_trigger = "default-on",
- },
- {
- .name = "usb1:red",
- .gpio = AT91_PIN_PA13,
- .active_low = 1,
- .default_trigger = "default-on",
- },
- {
- .name = "usb2:green",
- .gpio = AT91_PIN_PB26,
- .active_low = 1,
- .default_trigger = "default-on",
- },
- {
- .name = "usb2:red",
- .gpio = AT91_PIN_PB27,
- .active_low = 1,
- .default_trigger = "default-on",
- },
- {
- .name = "usb3:green",
- .gpio = AT91_PIN_PC8,
- .active_low = 1,
- .default_trigger = "default-on",
- },
- {
- .name = "usb3:red",
- .gpio = AT91_PIN_PC6,
- .active_low = 1,
- .default_trigger = "default-on",
- },
- {
- .name = "usb4:green",
- .gpio = AT91_PIN_PB4,
- .active_low = 1,
- .default_trigger = "default-on",
- },
- {
- .name = "usb4:red",
- .gpio = AT91_PIN_PB5,
- .active_low = 1,
- .default_trigger = "default-on",
- }
-};
-
-static void __init flexibity_board_init(void)
-{
- at91_register_devices();
-
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&flexibity_usbh_data);
- /* USB Device */
- at91_add_device_udc(&flexibity_udc_data);
- /* I2C */
- at91_add_device_i2c(flexibity_i2c_devices,
- ARRAY_SIZE(flexibity_i2c_devices));
- /* SPI */
- at91_add_device_spi(flexibity_spi_devices,
- ARRAY_SIZE(flexibity_spi_devices));
- /* MMC */
- at91_add_device_mci(0, &flexibity_mci0_data);
- /* LEDs */
- at91_gpio_leds(flexibity_leds, ARRAY_SIZE(flexibity_leds));
-}
-
-MACHINE_START(FLEXIBITY, "Flexibity Connect")
- /* Maintainer: Maxim Osipov */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = flexibity_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = flexibity_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * Copyright (C) 2010 Christian Glindkamp <christian.glindkamp@taskit.de>
- * taskit GmbH
- * 2010 Igor Plyatov <plyatov@gmail.com>
- * GeoSIG Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/w1-gpio.h>
-#include <linux/i2c.h>
-#include <linux/i2c/pcf857x.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/at91sam9_smc.h>
-#include <mach/hardware.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-#include "gsia18s.h"
-#include "stamp9g20.h"
-#include "gpio.h"
-
-static void __init gsia18s_init_early(void)
-{
- stamp9g20_init_early();
-}
-
-/*
- * Two USB Host ports
- */
-static struct at91_usbh_data __initdata usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata udc_data = {
- .vbus_pin = AT91_PIN_PA22,
- .pullup_pin = -EINVAL, /* pull-up driven by UDC */
-};
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata macb_data = {
- .phy_irq_pin = AT91_PIN_PA28,
- .is_rmii = 1,
-};
-
-/*
- * LEDs and GPOs
- */
-static struct gpio_led gpio_leds[] = {
- {
- .name = "gpo:spi1reset",
- .gpio = AT91_PIN_PC1,
- .active_low = 0,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- {
- .name = "gpo:trig_net_out",
- .gpio = AT91_PIN_PB20,
- .active_low = 0,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- {
- .name = "gpo:trig_net_dir",
- .gpio = AT91_PIN_PB19,
- .active_low = 0,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- {
- .name = "gpo:charge_dis",
- .gpio = AT91_PIN_PC2,
- .active_low = 0,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- {
- .name = "led:event",
- .gpio = AT91_PIN_PB17,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- {
- .name = "led:lan",
- .gpio = AT91_PIN_PB18,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- {
- .name = "led:error",
- .gpio = AT91_PIN_PB16,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- }
-};
-
-static struct gpio_led_platform_data gpio_led_info = {
- .leds = gpio_leds,
- .num_leds = ARRAY_SIZE(gpio_leds),
-};
-
-static struct platform_device leds = {
- .name = "leds-gpio",
- .id = 0,
- .dev = {
- .platform_data = &gpio_led_info,
- }
-};
-
-static void __init gsia18s_leds_init(void)
-{
- platform_device_register(&leds);
-}
-
-/* PCF8574 0x20 GPIO - U1 on the GS_IA18-CB_V3 board */
-static struct gpio_led pcf_gpio_leds1[] = {
- { /* bit 0 */
- .name = "gpo:hdc_power",
- .gpio = PCF_GPIO_HDC_POWER,
- .active_low = 0,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- { /* bit 1 */
- .name = "gpo:wifi_setup",
- .gpio = PCF_GPIO_WIFI_SETUP,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- { /* bit 2 */
- .name = "gpo:wifi_enable",
- .gpio = PCF_GPIO_WIFI_ENABLE,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- { /* bit 3 */
- .name = "gpo:wifi_reset",
- .gpio = PCF_GPIO_WIFI_RESET,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
- /* bit 4 used as GPI */
- { /* bit 5 */
- .name = "gpo:gps_setup",
- .gpio = PCF_GPIO_GPS_SETUP,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- { /* bit 6 */
- .name = "gpo:gps_standby",
- .gpio = PCF_GPIO_GPS_STANDBY,
- .active_low = 0,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
- { /* bit 7 */
- .name = "gpo:gps_power",
- .gpio = PCF_GPIO_GPS_POWER,
- .active_low = 0,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- }
-};
-
-static struct gpio_led_platform_data pcf_gpio_led_info1 = {
- .leds = pcf_gpio_leds1,
- .num_leds = ARRAY_SIZE(pcf_gpio_leds1),
-};
-
-static struct platform_device pcf_leds1 = {
- .name = "leds-gpio", /* GS_IA18-CB_board */
- .id = 1,
- .dev = {
- .platform_data = &pcf_gpio_led_info1,
- }
-};
-
-/* PCF8574 0x22 GPIO - U1 on the GS_2G_OPT1-A_V0 board (Alarm) */
-static struct gpio_led pcf_gpio_leds2[] = {
- { /* bit 0 */
- .name = "gpo:alarm_1",
- .gpio = PCF_GPIO_ALARM1,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- { /* bit 1 */
- .name = "gpo:alarm_2",
- .gpio = PCF_GPIO_ALARM2,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- { /* bit 2 */
- .name = "gpo:alarm_3",
- .gpio = PCF_GPIO_ALARM3,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- { /* bit 3 */
- .name = "gpo:alarm_4",
- .gpio = PCF_GPIO_ALARM4,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- /* bits 4, 5, 6 not used */
- { /* bit 7 */
- .name = "gpo:alarm_v_relay_on",
- .gpio = PCF_GPIO_ALARM_V_RELAY_ON,
- .active_low = 0,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
-};
-
-static struct gpio_led_platform_data pcf_gpio_led_info2 = {
- .leds = pcf_gpio_leds2,
- .num_leds = ARRAY_SIZE(pcf_gpio_leds2),
-};
-
-static struct platform_device pcf_leds2 = {
- .name = "leds-gpio",
- .id = 2,
- .dev = {
- .platform_data = &pcf_gpio_led_info2,
- }
-};
-
-/* PCF8574 0x24 GPIO U1 on the GS_2G-OPT23-A_V0 board (Modem) */
-static struct gpio_led pcf_gpio_leds3[] = {
- { /* bit 0 */
- .name = "gpo:modem_power",
- .gpio = PCF_GPIO_MODEM_POWER,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_OFF,
- },
- /* bits 1 and 2 not used */
- { /* bit 3 */
- .name = "gpo:modem_reset",
- .gpio = PCF_GPIO_MODEM_RESET,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
- /* bits 4, 5 and 6 not used */
- { /* bit 7 */
- .name = "gpo:trx_reset",
- .gpio = PCF_GPIO_TRX_RESET,
- .active_low = 1,
- .default_trigger = "none",
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- }
-};
-
-static struct gpio_led_platform_data pcf_gpio_led_info3 = {
- .leds = pcf_gpio_leds3,
- .num_leds = ARRAY_SIZE(pcf_gpio_leds3),
-};
-
-static struct platform_device pcf_leds3 = {
- .name = "leds-gpio",
- .id = 3,
- .dev = {
- .platform_data = &pcf_gpio_led_info3,
- }
-};
-
-static void __init gsia18s_pcf_leds_init(void)
-{
- platform_device_register(&pcf_leds1);
- platform_device_register(&pcf_leds2);
- platform_device_register(&pcf_leds3);
-}
-
-/*
- * SPI busses.
- */
-static struct spi_board_info gsia18s_spi_devices[] = {
- { /* User accessible spi0, cs0 used for communication with MSP RTC */
- .modalias = "spidev",
- .bus_num = 0,
- .chip_select = 0,
- .max_speed_hz = 580000,
- .mode = SPI_MODE_1,
- },
- { /* User accessible spi1, cs0 used for communication with int. DSP */
- .modalias = "spidev",
- .bus_num = 1,
- .chip_select = 0,
- .max_speed_hz = 5600000,
- .mode = SPI_MODE_0,
- },
- { /* User accessible spi1, cs1 used for communication with ext. DSP */
- .modalias = "spidev",
- .bus_num = 1,
- .chip_select = 1,
- .max_speed_hz = 5600000,
- .mode = SPI_MODE_0,
- },
- { /* User accessible spi1, cs2 used for communication with ext. DSP */
- .modalias = "spidev",
- .bus_num = 1,
- .chip_select = 2,
- .max_speed_hz = 5600000,
- .mode = SPI_MODE_0,
- },
- { /* User accessible spi1, cs3 used for communication with ext. DSP */
- .modalias = "spidev",
- .bus_num = 1,
- .chip_select = 3,
- .max_speed_hz = 5600000,
- .mode = SPI_MODE_0,
- }
-};
-
-/*
- * GPI Buttons
- */
-static struct gpio_keys_button buttons[] = {
- {
- .gpio = GPIO_TRIG_NET_IN,
- .code = BTN_1,
- .desc = "TRIG_NET_IN",
- .type = EV_KEY,
- .active_low = 0,
- .wakeup = 1,
- },
- { /* SW80 on the GS_IA18_S-MN board*/
- .gpio = GPIO_CARD_UNMOUNT_0,
- .code = BTN_2,
- .desc = "Card umount 0",
- .type = EV_KEY,
- .active_low = 1,
- .wakeup = 1,
- },
- { /* SW79 on the GS_IA18_S-MN board*/
- .gpio = GPIO_CARD_UNMOUNT_1,
- .code = BTN_3,
- .desc = "Card umount 1",
- .type = EV_KEY,
- .active_low = 1,
- .wakeup = 1,
- },
- { /* SW280 on the GS_IA18-CB board*/
- .gpio = GPIO_KEY_POWER,
- .code = KEY_POWER,
- .desc = "Power Off Button",
- .type = EV_KEY,
- .active_low = 0,
- .wakeup = 1,
- }
-};
-
-static struct gpio_keys_platform_data button_data = {
- .buttons = buttons,
- .nbuttons = ARRAY_SIZE(buttons),
-};
-
-static struct platform_device button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &button_data,
- }
-};
-
-static void __init gsia18s_add_device_buttons(void)
-{
- at91_set_gpio_input(GPIO_TRIG_NET_IN, 1);
- at91_set_deglitch(GPIO_TRIG_NET_IN, 1);
- at91_set_gpio_input(GPIO_CARD_UNMOUNT_0, 1);
- at91_set_deglitch(GPIO_CARD_UNMOUNT_0, 1);
- at91_set_gpio_input(GPIO_CARD_UNMOUNT_1, 1);
- at91_set_deglitch(GPIO_CARD_UNMOUNT_1, 1);
- at91_set_gpio_input(GPIO_KEY_POWER, 0);
- at91_set_deglitch(GPIO_KEY_POWER, 1);
-
- platform_device_register(&button_device);
-}
-
-/*
- * I2C
- */
-static int pcf8574x_0x20_setup(struct i2c_client *client, int gpio,
- unsigned int ngpio, void *context)
-{
- int status;
-
- status = gpio_request(gpio + PCF_GPIO_ETH_DETECT, "eth_det");
- if (status < 0) {
- pr_err("error: can't request GPIO%d\n",
- gpio + PCF_GPIO_ETH_DETECT);
- return status;
- }
- status = gpio_direction_input(gpio + PCF_GPIO_ETH_DETECT);
- if (status < 0) {
- pr_err("error: can't setup GPIO%d as input\n",
- gpio + PCF_GPIO_ETH_DETECT);
- return status;
- }
- status = gpio_export(gpio + PCF_GPIO_ETH_DETECT, false);
- if (status < 0) {
- pr_err("error: can't export GPIO%d\n",
- gpio + PCF_GPIO_ETH_DETECT);
- return status;
- }
- status = gpio_sysfs_set_active_low(gpio + PCF_GPIO_ETH_DETECT, 1);
- if (status < 0) {
- pr_err("error: gpio_sysfs_set active_low(GPIO%d, 1)\n",
- gpio + PCF_GPIO_ETH_DETECT);
- return status;
- }
-
- return 0;
-}
-
-static int pcf8574x_0x20_teardown(struct i2c_client *client, int gpio,
- unsigned ngpio, void *context)
-{
- gpio_free(gpio + PCF_GPIO_ETH_DETECT);
- return 0;
-}
-
-static struct pcf857x_platform_data pcf20_pdata = {
- .gpio_base = GS_IA18_S_PCF_GPIO_BASE0,
- .n_latch = (1 << 4),
- .setup = pcf8574x_0x20_setup,
- .teardown = pcf8574x_0x20_teardown,
-};
-
-static struct pcf857x_platform_data pcf22_pdata = {
- .gpio_base = GS_IA18_S_PCF_GPIO_BASE1,
-};
-
-static struct pcf857x_platform_data pcf24_pdata = {
- .gpio_base = GS_IA18_S_PCF_GPIO_BASE2,
-};
-
-static struct i2c_board_info __initdata gsia18s_i2c_devices[] = {
- { /* U1 on the GS_IA18-CB_V3 board */
- I2C_BOARD_INFO("pcf8574", 0x20),
- .platform_data = &pcf20_pdata,
- },
- { /* U1 on the GS_2G_OPT1-A_V0 board (Alarm) */
- I2C_BOARD_INFO("pcf8574", 0x22),
- .platform_data = &pcf22_pdata,
- },
- { /* U1 on the GS_2G-OPT23-A_V0 board (Modem) */
- I2C_BOARD_INFO("pcf8574", 0x24),
- .platform_data = &pcf24_pdata,
- },
- { /* U161 on the GS_IA18_S-MN board */
- I2C_BOARD_INFO("24c1024", 0x50),
- },
- { /* U162 on the GS_IA18_S-MN board */
- I2C_BOARD_INFO("24c01", 0x53),
- },
-};
-
-/*
- * Compact Flash
- */
-static struct at91_cf_data __initdata gsia18s_cf1_data = {
- .irq_pin = AT91_PIN_PA27,
- .det_pin = AT91_PIN_PB30,
- .vcc_pin = -EINVAL,
- .rst_pin = AT91_PIN_PB31,
- .chipselect = 5,
- .flags = AT91_CF_TRUE_IDE,
-};
-
-/* Power Off by RTC */
-static void gsia18s_power_off(void)
-{
- pr_notice("Power supply will be switched off automatically now or after 60 seconds without ArmDAS.\n");
- at91_set_gpio_output(AT91_PIN_PA25, 1);
- /* Spin to death... */
- while (1)
- ;
-}
-
-static int __init gsia18s_power_off_init(void)
-{
- pm_power_off = gsia18s_power_off;
- return 0;
-}
-
-/* ---------------------------------------------------------------------------*/
-
-static void __init gsia18s_board_init(void)
-{
- /*
- * USART0 on ttyS1 (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI).
- * Used for Internal Analog Modem.
- */
- at91_register_uart(AT91SAM9260_ID_US0, 1,
- ATMEL_UART_CTS | ATMEL_UART_RTS |
- ATMEL_UART_DTR | ATMEL_UART_DSR |
- ATMEL_UART_DCD | ATMEL_UART_RI);
- /*
- * USART1 on ttyS2 (Rx, Tx, CTS, RTS).
- * Used for GPS or WiFi or Data stream.
- */
- at91_register_uart(AT91SAM9260_ID_US1, 2,
- ATMEL_UART_CTS | ATMEL_UART_RTS);
- /*
- * USART2 on ttyS3 (Rx, Tx, CTS, RTS).
- * Used for External Modem.
- */
- at91_register_uart(AT91SAM9260_ID_US2, 3,
- ATMEL_UART_CTS | ATMEL_UART_RTS);
- /*
- * USART3 on ttyS4 (Rx, Tx, RTS).
- * Used for RS-485.
- */
- at91_register_uart(AT91SAM9260_ID_US3, 4, ATMEL_UART_RTS);
-
- /*
- * USART4 on ttyS5 (Rx, Tx).
- * Used for TRX433 Radio Module.
- */
- at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
- stamp9g20_board_init();
- at91_add_device_usbh(&usbh_data);
- at91_add_device_udc(&udc_data);
- at91_add_device_eth(&macb_data);
- gsia18s_leds_init();
- gsia18s_pcf_leds_init();
- gsia18s_add_device_buttons();
- at91_add_device_i2c(gsia18s_i2c_devices,
- ARRAY_SIZE(gsia18s_i2c_devices));
- at91_add_device_cf(&gsia18s_cf1_data);
- at91_add_device_spi(gsia18s_spi_devices,
- ARRAY_SIZE(gsia18s_spi_devices));
- gsia18s_power_off_init();
-}
-
-MACHINE_START(GSIA18S, "GS_IA18_S")
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = gsia18s_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = gsia18s_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/board-kafa.c
- *
- * Copyright (C) 2006 Sperry-Sun
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/cpu.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init kafa_init_early(void)
-{
- /* Set cpu type: PQFP */
- at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata kafa_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 0,
-};
-
-static struct at91_usbh_data __initdata kafa_usbh_data = {
- .ports = 1,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata kafa_udc_data = {
- .vbus_pin = AT91_PIN_PB6,
- .pullup_pin = AT91_PIN_PB7,
-};
-
-/*
- * LEDs
- */
-static struct gpio_led kafa_leds[] = {
- { /* D1 */
- .name = "led1",
- .gpio = AT91_PIN_PB4,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
-};
-
-static void __init kafa_board_init(void)
-{
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1 (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91RM9200_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&kafa_eth_data);
- /* USB Host */
- at91_add_device_usbh(&kafa_usbh_data);
- /* USB Device */
- at91_add_device_udc(&kafa_udc_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* SPI */
- at91_add_device_spi(NULL, 0);
- /* LEDs */
- at91_gpio_leds(kafa_leds, ARRAY_SIZE(kafa_leds));
-}
-
-MACHINE_START(KAFA, "Sperry-Sun KAFA")
- /* Maintainer: Sergei Sharonov */
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = kafa_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = kafa_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/board-kb9202.c
- *
- * Copyright (c) 2005 kb_admin
- * KwikByte, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/cpu.h>
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init kb9202_init_early(void)
-{
- /* Set cpu type: PQFP */
- at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
- /* Initialize processor: 10 MHz crystal */
- at91_initialize(10000000);
-}
-
-static struct macb_platform_data __initdata kb9202_eth_data = {
- .phy_irq_pin = AT91_PIN_PB29,
- .is_rmii = 0,
-};
-
-static struct at91_usbh_data __initdata kb9202_usbh_data = {
- .ports = 1,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata kb9202_udc_data = {
- .vbus_pin = AT91_PIN_PB24,
- .pullup_pin = AT91_PIN_PB22,
-};
-
-static struct mci_platform_data __initdata kb9202_mci0_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PB2,
- .wp_pin = -EINVAL,
- },
-};
-
-static struct mtd_partition __initdata kb9202_nand_partition[] = {
- {
- .name = "nand_fs",
- .offset = 0,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct atmel_nand_data __initdata kb9202_nand_data = {
- .ale = 22,
- .cle = 21,
- .det_pin = -EINVAL,
- .rdy_pin = AT91_PIN_PC29,
- .enable_pin = AT91_PIN_PC28,
- .ecc_mode = NAND_ECC_SOFT,
- .parts = kb9202_nand_partition,
- .num_parts = ARRAY_SIZE(kb9202_nand_partition),
-};
-
-/*
- * LEDs
- */
-static struct gpio_led kb9202_leds[] = {
- { /* D1 */
- .name = "led1",
- .gpio = AT91_PIN_PC19,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
- { /* D2 */
- .name = "led2",
- .gpio = AT91_PIN_PC18,
- .active_low = 1,
- .default_trigger = "timer",
- }
-};
-
-static void __init kb9202_board_init(void)
-{
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1 (Rx & Tx only) */
- at91_register_uart(AT91RM9200_ID_US0, 1, 0);
-
- /* USART1 on ttyS2 (Rx & Tx only) - IRDA (optional) */
- at91_register_uart(AT91RM9200_ID_US1, 2, 0);
-
- /* USART3 on ttyS3 (Rx, Tx, CTS, RTS) - RS485 (optional) */
- at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&kb9202_eth_data);
- /* USB Host */
- at91_add_device_usbh(&kb9202_usbh_data);
- /* USB Device */
- at91_add_device_udc(&kb9202_udc_data);
- /* MMC */
- at91_add_device_mci(0, &kb9202_mci0_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* SPI */
- at91_add_device_spi(NULL, 0);
- /* NAND */
- at91_add_device_nand(&kb9202_nand_data);
- /* LEDs */
- at91_gpio_leds(kb9202_leds, ARRAY_SIZE(kb9202_leds));
-}
-
-MACHINE_START(KB9200, "KB920x")
- /* Maintainer: KwikByte, Inc. */
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = kb9202_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = kb9202_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * Copyright (C) 2010 Christian Glindkamp <christian.glindkamp@taskit.de>
- * taskit GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-/*
- * copied and adjusted from board-stamp9g20.c
- * by Peter Gsellmann <pgsellmann@portner-elektronik.at>
- */
-
-#include <linux/mm.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/w1-gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/at91sam9_smc.h>
-#include <mach/hardware.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-#include "stamp9g20.h"
-#include "gpio.h"
-
-
-static void __init pcontrol_g20_init_early(void)
-{
- stamp9g20_init_early();
-}
-
-static struct sam9_smc_config __initdata pcontrol_smc_config[2] = { {
- .ncs_read_setup = 16,
- .nrd_setup = 18,
- .ncs_write_setup = 16,
- .nwe_setup = 18,
-
- .ncs_read_pulse = 63,
- .nrd_pulse = 55,
- .ncs_write_pulse = 63,
- .nwe_pulse = 55,
-
- .read_cycle = 127,
- .write_cycle = 127,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
- | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_SELECT
- | AT91_SMC_DBW_8 | AT91_SMC_PS_4
- | AT91_SMC_TDFMODE,
- .tdf_cycles = 3,
-}, {
- .ncs_read_setup = 0,
- .nrd_setup = 0,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 8,
- .nrd_pulse = 8,
- .ncs_write_pulse = 5,
- .nwe_pulse = 4,
-
- .read_cycle = 8,
- .write_cycle = 7,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE
- | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_SELECT
- | AT91_SMC_DBW_16 | AT91_SMC_PS_8
- | AT91_SMC_TDFMODE,
- .tdf_cycles = 1,
-} };
-
-static void __init add_device_pcontrol(void)
-{
- /* configure chip-select 4 (IO compatible to 8051 X4 ) */
- sam9_smc_configure(0, 4, &pcontrol_smc_config[0]);
- /* configure chip-select 7 (FerroRAM 256KiBx16bit MR2A16A D4 ) */
- sam9_smc_configure(0, 7, &pcontrol_smc_config[1]);
-}
-
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata pcontrol_g20_udc_data = {
- .vbus_pin = AT91_PIN_PA22, /* Detect +5V bus voltage */
- .pullup_pin = AT91_PIN_PA4, /* K-state, active low */
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata macb_data = {
- .phy_irq_pin = AT91_PIN_PA28,
- .is_rmii = 1,
-};
-
-
-/*
- * I2C devices: eeprom and phy/switch
- */
-static struct i2c_board_info __initdata pcontrol_g20_i2c_devices[] = {
-{ /* D7 address width=2, 8KiB */
- I2C_BOARD_INFO("24c64", 0x50)
-}, { /* D8 address width=1, 1 byte has 32 bits! */
- I2C_BOARD_INFO("lan9303", 0x0a)
-}, };
-
-
-/*
- * LEDs
- */
-static struct gpio_led pcontrol_g20_leds[] = {
- {
- .name = "LED1", /* red H5 */
- .gpio = AT91_PIN_PB18,
- .active_low = 1,
- .default_trigger = "none", /* supervisor */
- }, {
- .name = "LED2", /* yellow H7 */
- .gpio = AT91_PIN_PB19,
- .active_low = 1,
- .default_trigger = "mmc0", /* SD-card activity */
- }, {
- .name = "LED3", /* green H2 */
- .gpio = AT91_PIN_PB20,
- .active_low = 1,
- .default_trigger = "heartbeat", /* blinky */
- }, {
- .name = "LED4", /* red H3 */
- .gpio = AT91_PIN_PC6,
- .active_low = 1,
- .default_trigger = "none", /* connection lost */
- }, {
- .name = "LED5", /* yellow H6 */
- .gpio = AT91_PIN_PC7,
- .active_low = 1,
- .default_trigger = "none", /* unsent data */
- }, {
- .name = "LED6", /* green H1 */
- .gpio = AT91_PIN_PC9,
- .active_low = 1,
- .default_trigger = "none", /* snafu */
- }
-};
-
-
-/*
- * SPI devices
- */
-static struct spi_board_info pcontrol_g20_spi_devices[] = {
- {
- .modalias = "spidev", /* HMI port X4 */
- .chip_select = 1,
- .max_speed_hz = 50 * 1000 * 1000,
- .bus_num = 0,
- }, {
- .modalias = "spidev", /* piggyback A2 */
- .chip_select = 0,
- .max_speed_hz = 50 * 1000 * 1000,
- .bus_num = 1,
- },
-};
-
-
-static void __init pcontrol_g20_board_init(void)
-{
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) piggyback A2 */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS
- | ATMEL_UART_RTS);
-
- /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) isolated RS485 X5 */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS
- | ATMEL_UART_RTS);
-
- /* USART2 on ttyS3. (Rx, Tx) 9bit-Bus Multidrop-mode X4 */
- at91_register_uart(AT91SAM9260_ID_US4, 3, 0);
- stamp9g20_board_init();
- at91_add_device_usbh(&usbh_data);
- at91_add_device_eth(&macb_data);
- at91_add_device_i2c(pcontrol_g20_i2c_devices,
- ARRAY_SIZE(pcontrol_g20_i2c_devices));
- add_device_pcontrol();
- at91_add_device_spi(pcontrol_g20_spi_devices,
- ARRAY_SIZE(pcontrol_g20_spi_devices));
- at91_add_device_udc(&pcontrol_g20_udc_data);
- at91_gpio_leds(pcontrol_g20_leds,
- ARRAY_SIZE(pcontrol_g20_leds));
- /* piggyback A2 */
- at91_set_gpio_output(AT91_PIN_PB31, 1);
-}
-
-
-MACHINE_START(PCONTROL_G20, "PControl G20")
- /* Maintainer: pgsellmann@portner-elektronik.at */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = pcontrol_g20_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = pcontrol_g20_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/board-picotux200.c
- *
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2007 Kleinhenz Elektronik GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/physmap.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init picotux200_init_early(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata picotux200_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-};
-
-static struct at91_usbh_data __initdata picotux200_usbh_data = {
- .ports = 1,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct mci_platform_data __initdata picotux200_mci0_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PB27,
- .wp_pin = AT91_PIN_PA17,
- },
-};
-
-#define PICOTUX200_FLASH_BASE AT91_CHIPSELECT_0
-#define PICOTUX200_FLASH_SIZE SZ_4M
-
-static struct physmap_flash_data picotux200_flash_data = {
- .width = 2,
-};
-
-static struct resource picotux200_flash_resource = {
- .start = PICOTUX200_FLASH_BASE,
- .end = PICOTUX200_FLASH_BASE + PICOTUX200_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device picotux200_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &picotux200_flash_data,
- },
- .resource = &picotux200_flash_resource,
- .num_resources = 1,
-};
-
-static void __init picotux200_board_init(void)
-{
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&picotux200_eth_data);
- /* USB Host */
- at91_add_device_usbh(&picotux200_usbh_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* MMC */
- at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
- at91_add_device_mci(0, &picotux200_mci0_data);
- /* NOR Flash */
- platform_device_register(&picotux200_flash);
-}
-
-MACHINE_START(PICOTUX2XX, "picotux 200")
- /* Maintainer: Kleinhenz Elektronik GmbH */
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = picotux200_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = picotux200_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/board-rm9200ek.c
- *
- * Copyright (C) 2005 SAN People
- *
- * Epson S1D framebuffer glue code is:
- * Copyright (C) 2005 Thibaut VARENE <varenet@parisc-linux.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/mtd/physmap.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init ek_init_early(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-static struct macb_platform_data __initdata ek_eth_data = {
- .phy_irq_pin = AT91_PIN_PC4,
- .is_rmii = 1,
-};
-
-static struct at91_usbh_data __initdata ek_usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata ek_udc_data = {
- .vbus_pin = AT91_PIN_PD4,
- .pullup_pin = AT91_PIN_PD5,
-};
-
-#ifndef CONFIG_MTD_AT91_DATAFLASH_CARD
-static struct mci_platform_data __initdata ek_mci0_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PB27,
- .wp_pin = AT91_PIN_PA17,
- }
-};
-#endif
-
-static struct spi_board_info ek_spi_devices[] = {
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- },
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
- { /* DataFlash card */
- .modalias = "mtd_dataflash",
- .chip_select = 3,
- .max_speed_hz = 15 * 1000 * 1000,
- },
-#endif
-};
-
-static struct i2c_board_info __initdata ek_i2c_devices[] = {
- {
- I2C_BOARD_INFO("ics1523", 0x26),
- },
- {
- I2C_BOARD_INFO("dac3550", 0x4d),
- }
-};
-
-#define EK_FLASH_BASE AT91_CHIPSELECT_0
-#define EK_FLASH_SIZE SZ_8M
-
-static struct physmap_flash_data ek_flash_data = {
- .width = 2,
-};
-
-static struct resource ek_flash_resource = {
- .start = EK_FLASH_BASE,
- .end = EK_FLASH_BASE + EK_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device ek_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &ek_flash_data,
- },
- .resource = &ek_flash_resource,
- .num_resources = 1,
-};
-
-static struct gpio_led ek_leds[] = {
- { /* "user led 1", DS2 */
- .name = "green",
- .gpio = AT91_PIN_PB0,
- .active_low = 1,
- .default_trigger = "mmc0",
- },
- { /* "user led 2", DS4 */
- .name = "yellow",
- .gpio = AT91_PIN_PB1,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
- { /* "user led 3", DS6 */
- .name = "red",
- .gpio = AT91_PIN_PB2,
- .active_low = 1,
- }
-};
-
-static void __init ek_board_init(void)
-{
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&ek_eth_data);
- /* USB Host */
- at91_add_device_usbh(&ek_usbh_data);
- /* USB Device */
- at91_add_device_udc(&ek_udc_data);
- at91_set_multi_drive(ek_udc_data.pullup_pin, 1); /* pullup_pin is connected to reset */
- /* I2C */
- at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
- /* SPI */
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
-#ifdef CONFIG_MTD_AT91_DATAFLASH_CARD
- /* DataFlash card */
- at91_set_gpio_output(AT91_PIN_PB22, 0);
-#else
- /* MMC */
- at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
- at91_add_device_mci(0, &ek_mci0_data);
-#endif
- /* NOR Flash */
- platform_device_register(&ek_flash);
- /* LEDs */
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
- /* VGA */
-// ek_add_device_video();
-}
-
-MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK")
- /* Maintainer: SAN People/Atmel */
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = ek_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ek_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/board-sam9-l9260.c
- *
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2006 Atmel
- * Copyright (C) 2007 Olimex Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/at91sam9_smc.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init ek_init_early(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
- .vbus_pin = AT91_PIN_PC5,
- .pullup_pin = -EINVAL, /* pull-up driven by UDC */
-};
-
-
-/*
- * SPI devices.
- */
-static struct spi_board_info ek_spi_devices[] = {
-#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 1,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
- { /* DataFlash card */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#endif
-#endif
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata ek_macb_data = {
- .phy_irq_pin = AT91_PIN_PA7,
- .is_rmii = 0,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
- {
- .name = "Bootloader Area",
- .offset = 0,
- .size = 10 * SZ_1M,
- },
- {
- .name = "User Area",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct atmel_nand_data __initdata ek_nand_data = {
- .ale = 21,
- .cle = 22,
- .det_pin = -EINVAL,
- .rdy_pin = AT91_PIN_PC13,
- .enable_pin = AT91_PIN_PC14,
- .ecc_mode = NAND_ECC_SOFT,
- .parts = ek_nand_partition,
- .num_parts = ARRAY_SIZE(ek_nand_partition),
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 1,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 3,
- .nrd_pulse = 3,
- .ncs_write_pulse = 3,
- .nwe_pulse = 3,
-
- .read_cycle = 5,
- .write_cycle = 5,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
- .tdf_cycles = 2,
-};
-
-static void __init ek_add_device_nand(void)
-{
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(0, 3, &ek_nand_smc_config);
-
- at91_add_device_nand(&ek_nand_data);
-}
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct mci_platform_data __initdata ek_mci0_data = {
- .slot[1] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PC8,
- .wp_pin = AT91_PIN_PC4,
- },
-};
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
- { /* D1 */
- .name = "led1",
- .gpio = AT91_PIN_PA9,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
- { /* D2 */
- .name = "led2",
- .gpio = AT91_PIN_PA6,
- .active_low = 1,
- .default_trigger = "timer",
- }
-};
-
-static void __init ek_board_init(void)
-{
- at91_register_devices();
-
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&ek_usbh_data);
- /* USB Device */
- at91_add_device_udc(&ek_udc_data);
- /* SPI */
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
- /* NAND */
- ek_add_device_nand();
- /* Ethernet */
- at91_add_device_eth(&ek_macb_data);
- /* MMC */
- at91_add_device_mci(0, &ek_mci0_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* LEDs */
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-}
-
-MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260")
- /* Maintainer: Olimex */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = ek_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ek_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/board-sam9260ek.c
- *
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2006 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/at73c213.h>
-#include <linux/clk.h>
-#include <linux/platform_data/at24.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/system_rev.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init ek_init_early(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
- .vbus_pin = AT91_PIN_PC5,
- .pullup_pin = -EINVAL, /* pull-up driven by UDC */
-};
-
-
-/*
- * Audio
- */
-static struct at73c213_board_info at73c213_data = {
- .ssc_id = 0,
- .shortname = "AT91SAM9260-EK external DAC",
-};
-
-#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
-static void __init at73c213_set_clk(struct at73c213_board_info *info)
-{
- struct clk *pck0;
- struct clk *plla;
-
- pck0 = clk_get(NULL, "pck0");
- plla = clk_get(NULL, "plla");
-
- /* AT73C213 MCK Clock */
- at91_set_B_periph(AT91_PIN_PC1, 0); /* PCK0 */
-
- clk_set_parent(pck0, plla);
- clk_put(plla);
-
- info->dac_clk = pck0;
-}
-#else
-static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
-#endif
-
-/*
- * SPI devices.
- */
-static struct spi_board_info ek_spi_devices[] = {
-#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 1,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
- { /* DataFlash card */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#endif
-#endif
-#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
- { /* AT73C213 DAC */
- .modalias = "at73c213",
- .chip_select = 0,
- .max_speed_hz = 10 * 1000 * 1000,
- .bus_num = 1,
- .mode = SPI_MODE_1,
- .platform_data = &at73c213_data,
- },
-#endif
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata ek_macb_data = {
- .phy_irq_pin = AT91_PIN_PA7,
- .is_rmii = 1,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
- {
- .name = "Partition 1",
- .offset = 0,
- .size = SZ_256K,
- },
- {
- .name = "Partition 2",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct atmel_nand_data __initdata ek_nand_data = {
- .ale = 21,
- .cle = 22,
- .det_pin = -EINVAL,
- .rdy_pin = AT91_PIN_PC13,
- .enable_pin = AT91_PIN_PC14,
- .ecc_mode = NAND_ECC_SOFT,
- .on_flash_bbt = 1,
- .parts = ek_nand_partition,
- .num_parts = ARRAY_SIZE(ek_nand_partition),
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 1,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 3,
- .nrd_pulse = 3,
- .ncs_write_pulse = 3,
- .nwe_pulse = 3,
-
- .read_cycle = 5,
- .write_cycle = 5,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
- .tdf_cycles = 2,
-};
-
-static void __init ek_add_device_nand(void)
-{
- ek_nand_data.bus_width_16 = board_have_nand_16bit();
- /* setup bus-width (8 or 16) */
- if (ek_nand_data.bus_width_16)
- ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
- else
- ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(0, 3, &ek_nand_smc_config);
-
- at91_add_device_nand(&ek_nand_data);
-}
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct mci_platform_data __initdata ek_mci0_data = {
- .slot[1] = {
- .bus_width = 4,
- .detect_pin = -EINVAL,
- .wp_pin = -EINVAL,
- },
-};
-
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
- { /* "bottom" led, green, userled1 to be defined */
- .name = "ds5",
- .gpio = AT91_PIN_PA6,
- .active_low = 1,
- .default_trigger = "none",
- },
- { /* "power" led, yellow */
- .name = "ds1",
- .gpio = AT91_PIN_PA9,
- .default_trigger = "heartbeat",
- }
-};
-
-/*
- * I2C devices
- */
-static struct at24_platform_data at24c512 = {
- .byte_len = SZ_512K / 8,
- .page_size = 128,
- .flags = AT24_FLAG_ADDR16,
-};
-
-static struct i2c_board_info __initdata ek_i2c_devices[] = {
- {
- I2C_BOARD_INFO("24c512", 0x50),
- .platform_data = &at24c512,
- },
- /* more devices can be added using expansion connectors */
-};
-
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
- {
- .gpio = AT91_PIN_PA30,
- .code = BTN_3,
- .desc = "Button 3",
- .active_low = 1,
- .wakeup = 1,
- },
- {
- .gpio = AT91_PIN_PA31,
- .code = BTN_4,
- .desc = "Button 4",
- .active_low = 1,
- .wakeup = 1,
- }
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
- .buttons = ek_buttons,
- .nbuttons = ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &ek_button_data,
- }
-};
-
-static void __init ek_add_device_buttons(void)
-{
- at91_set_gpio_input(AT91_PIN_PA30, 1); /* btn3 */
- at91_set_deglitch(AT91_PIN_PA30, 1);
- at91_set_gpio_input(AT91_PIN_PA31, 1); /* btn4 */
- at91_set_deglitch(AT91_PIN_PA31, 1);
-
- platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-
-static void __init ek_board_init(void)
-{
- at91_register_devices();
-
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&ek_usbh_data);
- /* USB Device */
- at91_add_device_udc(&ek_udc_data);
- /* SPI */
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
- /* NAND */
- ek_add_device_nand();
- /* Ethernet */
- at91_add_device_eth(&ek_macb_data);
- /* MMC */
- at91_add_device_mci(0, &ek_mci0_data);
- /* I2C */
- at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
- /* SSC (to AT73C213) */
- at73c213_set_clk(&at73c213_data);
- at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
- /* LEDs */
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
- /* Push Buttons */
- ek_add_device_buttons();
-}
-
-MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK")
- /* Maintainer: Atmel */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = ek_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ek_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/board-sam9261ek.c
- *
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2006 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/spi/at73c213.h>
-#include <linux/clk.h>
-#include <linux/dm9000.h>
-#include <linux/fb.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/system_rev.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init ek_init_early(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-/*
- * DM9000 ethernet device
- */
-#if defined(CONFIG_DM9000)
-static struct resource dm9000_resource[] = {
- [0] = {
- .start = AT91_CHIPSELECT_2,
- .end = AT91_CHIPSELECT_2 + 3,
- .flags = IORESOURCE_MEM
- },
- [1] = {
- .start = AT91_CHIPSELECT_2 + 0x44,
- .end = AT91_CHIPSELECT_2 + 0xFF,
- .flags = IORESOURCE_MEM
- },
- [2] = {
- .flags = IORESOURCE_IRQ
- | IORESOURCE_IRQ_LOWEDGE | IORESOURCE_IRQ_HIGHEDGE,
- }
-};
-
-static struct dm9000_plat_data dm9000_platdata = {
- .flags = DM9000_PLATF_16BITONLY | DM9000_PLATF_NO_EEPROM,
-};
-
-static struct platform_device dm9000_device = {
- .name = "dm9000",
- .id = 0,
- .num_resources = ARRAY_SIZE(dm9000_resource),
- .resource = dm9000_resource,
- .dev = {
- .platform_data = &dm9000_platdata,
- }
-};
-
-/*
- * SMC timings for the DM9000.
- * Note: These timings were calculated for MASTER_CLOCK = 100000000 according to the DM9000 timings.
- */
-static struct sam9_smc_config __initdata dm9000_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 2,
- .ncs_write_setup = 0,
- .nwe_setup = 2,
-
- .ncs_read_pulse = 8,
- .nrd_pulse = 4,
- .ncs_write_pulse = 8,
- .nwe_pulse = 4,
-
- .read_cycle = 16,
- .write_cycle = 16,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_BAT_WRITE | AT91_SMC_DBW_16,
- .tdf_cycles = 1,
-};
-
-static void __init ek_add_device_dm9000(void)
-{
- struct resource *r = &dm9000_resource[2];
-
- /* Configure chip-select 2 (DM9000) */
- sam9_smc_configure(0, 2, &dm9000_smc_config);
-
- /* Configure Reset signal as output */
- at91_set_gpio_output(AT91_PIN_PC10, 0);
-
- /* Configure Interrupt pin as input, no pull-up */
- at91_set_gpio_input(AT91_PIN_PC11, 0);
-
- r->start = r->end = gpio_to_irq(AT91_PIN_PC11);
- platform_device_register(&dm9000_device);
-}
-#else
-static void __init ek_add_device_dm9000(void) {}
-#endif /* CONFIG_DM9000 */
-
-
-/*
- * USB Host Port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-
-/*
- * USB Device Port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
- .vbus_pin = AT91_PIN_PB29,
- .pullup_pin = -EINVAL, /* pull-up driven by UDC */
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
- {
- .name = "Partition 1",
- .offset = 0,
- .size = SZ_256K,
- },
- {
- .name = "Partition 2",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct atmel_nand_data __initdata ek_nand_data = {
- .ale = 22,
- .cle = 21,
- .det_pin = -EINVAL,
- .rdy_pin = AT91_PIN_PC15,
- .enable_pin = AT91_PIN_PC14,
- .ecc_mode = NAND_ECC_SOFT,
- .on_flash_bbt = 1,
- .parts = ek_nand_partition,
- .num_parts = ARRAY_SIZE(ek_nand_partition),
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 1,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 3,
- .nrd_pulse = 3,
- .ncs_write_pulse = 3,
- .nwe_pulse = 3,
-
- .read_cycle = 5,
- .write_cycle = 5,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
- .tdf_cycles = 2,
-};
-
-static void __init ek_add_device_nand(void)
-{
- ek_nand_data.bus_width_16 = board_have_nand_16bit();
- /* setup bus-width (8 or 16) */
- if (ek_nand_data.bus_width_16)
- ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
- else
- ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(0, 3, &ek_nand_smc_config);
-
- at91_add_device_nand(&ek_nand_data);
-}
-
-/*
- * SPI related devices
- */
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
-
-/*
- * ADS7846 Touchscreen
- */
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-
-static int ads7843_pendown_state(void)
-{
- return !at91_get_gpio_value(AT91_PIN_PC2); /* Touchscreen PENIRQ */
-}
-
-static struct ads7846_platform_data ads_info = {
- .model = 7843,
- .x_min = 150,
- .x_max = 3830,
- .y_min = 190,
- .y_max = 3830,
- .vref_delay_usecs = 100,
- .x_plate_ohms = 450,
- .y_plate_ohms = 250,
- .pressure_max = 15000,
- .debounce_max = 1,
- .debounce_rep = 0,
- .debounce_tol = (~0),
- .get_pendown_state = ads7843_pendown_state,
-};
-
-static void __init ek_add_device_ts(void)
-{
- at91_set_B_periph(AT91_PIN_PC2, 1); /* External IRQ0, with pullup */
- at91_set_gpio_input(AT91_PIN_PA11, 1); /* Touchscreen BUSY signal */
-}
-#else
-static void __init ek_add_device_ts(void) {}
-#endif
-
-/*
- * Audio
- */
-static struct at73c213_board_info at73c213_data = {
- .ssc_id = 1,
- .shortname = "AT91SAM9261/9G10-EK external DAC",
-};
-
-#if defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
-static void __init at73c213_set_clk(struct at73c213_board_info *info)
-{
- struct clk *pck2;
- struct clk *plla;
-
- pck2 = clk_get(NULL, "pck2");
- plla = clk_get(NULL, "plla");
-
- /* AT73C213 MCK Clock */
- at91_set_B_periph(AT91_PIN_PB31, 0); /* PCK2 */
-
- clk_set_parent(pck2, plla);
- clk_put(plla);
-
- info->dac_clk = pck2;
-}
-#else
-static void __init at73c213_set_clk(struct at73c213_board_info *info) {}
-#endif
-
-/*
- * SPI devices
- */
-static struct spi_board_info ek_spi_devices[] = {
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
- {
- .modalias = "ads7846",
- .chip_select = 2,
- .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
- .bus_num = 0,
- .platform_data = &ads_info,
- .irq = NR_IRQS_LEGACY + AT91SAM9261_ID_IRQ0,
- .controller_data = (void *) AT91_PIN_PA28, /* CS pin */
- },
-#endif
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
- { /* DataFlash card - jumper (J12) configurable to CS3 or CS0 */
- .modalias = "mtd_dataflash",
- .chip_select = 3,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#elif defined(CONFIG_SND_AT73C213) || defined(CONFIG_SND_AT73C213_MODULE)
- { /* AT73C213 DAC */
- .modalias = "at73c213",
- .chip_select = 3,
- .max_speed_hz = 10 * 1000 * 1000,
- .bus_num = 0,
- .mode = SPI_MODE_1,
- .platform_data = &at73c213_data,
- .controller_data = (void*) AT91_PIN_PA29, /* default for CS3 is PA6, but it must be PA29 */
- },
-#endif
-};
-
-#else /* CONFIG_SPI_ATMEL_* */
-/* spi0 and mmc/sd share the same PIO pins: cannot be used at the same time */
-
-/*
- * MCI (SD/MMC)
- * det_pin, wp_pin and vcc_pin are not connected
- */
-static struct mci_platform_data __initdata mci0_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = -EINVAL,
- .wp_pin = -EINVAL,
- },
-};
-
-#endif /* CONFIG_SPI_ATMEL_* */
-
-
-/*
- * LCD Controller
- */
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-
-#if defined(CONFIG_FB_ATMEL_STN)
-
-/* STN */
-static struct fb_videomode at91_stn_modes[] = {
- {
- .name = "SP06Q002 @ 75",
- .refresh = 75,
- .xres = 320, .yres = 240,
- .pixclock = KHZ2PICOS(1440),
-
- .left_margin = 1, .right_margin = 1,
- .upper_margin = 0, .lower_margin = 0,
- .hsync_len = 1, .vsync_len = 1,
-
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- .vmode = FB_VMODE_NONINTERLACED,
- },
-};
-
-static struct fb_monspecs at91fb_default_stn_monspecs = {
- .manufacturer = "HIT",
- .monitor = "SP06Q002",
-
- .modedb = at91_stn_modes,
- .modedb_len = ARRAY_SIZE(at91_stn_modes),
- .hfmin = 15000,
- .hfmax = 64000,
- .vfmin = 50,
- .vfmax = 150,
-};
-
-#define AT91SAM9261_DEFAULT_STN_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
- | ATMEL_LCDC_DISTYPE_STNMONO \
- | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE \
- | ATMEL_LCDC_IFWIDTH_4 \
- | ATMEL_LCDC_SCANMOD_SINGLE)
-
-static void at91_lcdc_stn_power_control(struct atmel_lcdfb_pdata *pdata, int on)
-{
- /* backlight */
- if (on) { /* power up */
- at91_set_gpio_value(AT91_PIN_PC14, 0);
- at91_set_gpio_value(AT91_PIN_PC15, 0);
- } else { /* power down */
- at91_set_gpio_value(AT91_PIN_PC14, 1);
- at91_set_gpio_value(AT91_PIN_PC15, 1);
- }
-}
-
-static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
- .default_bpp = 1,
- .default_dmacon = ATMEL_LCDC_DMAEN,
- .default_lcdcon2 = AT91SAM9261_DEFAULT_STN_LCDCON2,
- .default_monspecs = &at91fb_default_stn_monspecs,
- .atmel_lcdfb_power_control = at91_lcdc_stn_power_control,
- .guard_time = 1,
-};
-
-#else
-
-/* TFT */
-static struct fb_videomode at91_tft_vga_modes[] = {
- {
- .name = "TX09D50VM1CCA @ 60",
- .refresh = 60,
- .xres = 240, .yres = 320,
- .pixclock = KHZ2PICOS(4965),
-
- .left_margin = 1, .right_margin = 33,
- .upper_margin = 1, .lower_margin = 0,
- .hsync_len = 5, .vsync_len = 1,
-
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- .vmode = FB_VMODE_NONINTERLACED,
- },
-};
-
-static struct fb_monspecs at91fb_default_tft_monspecs = {
- .manufacturer = "HIT",
- .monitor = "TX09D50VM1CCA",
-
- .modedb = at91_tft_vga_modes,
- .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
- .hfmin = 15000,
- .hfmax = 64000,
- .vfmin = 50,
- .vfmax = 150,
-};
-
-#define AT91SAM9261_DEFAULT_TFT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
- | ATMEL_LCDC_DISTYPE_TFT \
- | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-
-static void at91_lcdc_tft_power_control(struct atmel_lcdfb_pdata *pdata, int on)
-{
- if (on)
- at91_set_gpio_value(AT91_PIN_PA12, 0); /* power up */
- else
- at91_set_gpio_value(AT91_PIN_PA12, 1); /* power down */
-}
-
-static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
- .lcdcon_is_backlight = true,
- .default_bpp = 16,
- .default_dmacon = ATMEL_LCDC_DMAEN,
- .default_lcdcon2 = AT91SAM9261_DEFAULT_TFT_LCDCON2,
- .default_monspecs = &at91fb_default_tft_monspecs,
- .atmel_lcdfb_power_control = at91_lcdc_tft_power_control,
- .guard_time = 1,
-};
-#endif
-
-#else
-static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
-#endif
-
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
- {
- .gpio = AT91_PIN_PA27,
- .code = BTN_0,
- .desc = "Button 0",
- .active_low = 1,
- .wakeup = 1,
- },
- {
- .gpio = AT91_PIN_PA26,
- .code = BTN_1,
- .desc = "Button 1",
- .active_low = 1,
- .wakeup = 1,
- },
- {
- .gpio = AT91_PIN_PA25,
- .code = BTN_2,
- .desc = "Button 2",
- .active_low = 1,
- .wakeup = 1,
- },
- {
- .gpio = AT91_PIN_PA24,
- .code = BTN_3,
- .desc = "Button 3",
- .active_low = 1,
- .wakeup = 1,
- }
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
- .buttons = ek_buttons,
- .nbuttons = ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &ek_button_data,
- }
-};
-
-static void __init ek_add_device_buttons(void)
-{
- at91_set_gpio_input(AT91_PIN_PA27, 1); /* btn0 */
- at91_set_deglitch(AT91_PIN_PA27, 1);
- at91_set_gpio_input(AT91_PIN_PA26, 1); /* btn1 */
- at91_set_deglitch(AT91_PIN_PA26, 1);
- at91_set_gpio_input(AT91_PIN_PA25, 1); /* btn2 */
- at91_set_deglitch(AT91_PIN_PA25, 1);
- at91_set_gpio_input(AT91_PIN_PA24, 1); /* btn3 */
- at91_set_deglitch(AT91_PIN_PA24, 1);
-
- platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
- { /* "bottom" led, green, userled1 to be defined */
- .name = "ds7",
- .gpio = AT91_PIN_PA14,
- .active_low = 1,
- .default_trigger = "none",
- },
- { /* "top" led, green, userled2 to be defined */
- .name = "ds8",
- .gpio = AT91_PIN_PA13,
- .active_low = 1,
- .default_trigger = "none",
- },
- { /* "power" led, yellow */
- .name = "ds1",
- .gpio = AT91_PIN_PA23,
- .default_trigger = "heartbeat",
- }
-};
-
-static void __init ek_board_init(void)
-{
- at91_register_devices();
-
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
- at91_add_device_serial();
-
- if (cpu_is_at91sam9g10())
- ek_lcdc_data.lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB;
-
- /* USB Host */
- at91_add_device_usbh(&ek_usbh_data);
- /* USB Device */
- at91_add_device_udc(&ek_udc_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* NAND */
- ek_add_device_nand();
- /* DM9000 ethernet */
- ek_add_device_dm9000();
-
- /* spi0 and mmc/sd share the same PIO pins */
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
- /* SPI */
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
- /* Touchscreen */
- ek_add_device_ts();
- /* SSC (to AT73C213) */
- at73c213_set_clk(&at73c213_data);
- at91_add_device_ssc(AT91SAM9261_ID_SSC1, ATMEL_SSC_TX);
-#else
- /* MMC */
- at91_add_device_mci(0, &mci0_data);
-#endif
- /* LCD Controller */
- at91_add_device_lcdc(&ek_lcdc_data);
- /* Push Buttons */
- ek_add_device_buttons();
- /* LEDs */
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-}
-
-MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK")
- /* Maintainer: Atmel */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = ek_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ek_board_init,
-MACHINE_END
-
-MACHINE_START(AT91SAM9G10EK, "Atmel AT91SAM9G10-EK")
- /* Maintainer: Atmel */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = ek_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ek_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/board-sam9263ek.c
- *
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2007 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/platform_data/at24.h>
-#include <linux/fb.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/pwm.h>
-#include <linux/leds_pwm.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/at91sam9_smc.h>
-#include <mach/system_rev.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init ek_init_early(void)
-{
- /* Initialize processor: 16.367 MHz crystal */
- at91_initialize(16367660);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
- .ports = 2,
- .vbus_pin = { AT91_PIN_PA24, AT91_PIN_PA21 },
- .vbus_pin_active_low = {1, 1},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
- .vbus_pin = AT91_PIN_PA25,
- .pullup_pin = -EINVAL, /* pull-up driven by UDC */
-};
-
-
-/*
- * ADS7846 Touchscreen
- */
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-static int ads7843_pendown_state(void)
-{
- return !at91_get_gpio_value(AT91_PIN_PA15); /* Touchscreen PENIRQ */
-}
-
-static struct ads7846_platform_data ads_info = {
- .model = 7843,
- .x_min = 150,
- .x_max = 3830,
- .y_min = 190,
- .y_max = 3830,
- .vref_delay_usecs = 100,
- .x_plate_ohms = 450,
- .y_plate_ohms = 250,
- .pressure_max = 15000,
- .debounce_max = 1,
- .debounce_rep = 0,
- .debounce_tol = (~0),
- .get_pendown_state = ads7843_pendown_state,
-};
-
-static void __init ek_add_device_ts(void)
-{
- at91_set_B_periph(AT91_PIN_PA15, 1); /* External IRQ1, with pullup */
- at91_set_gpio_input(AT91_PIN_PA31, 1); /* Touchscreen BUSY signal */
-}
-#else
-static void __init ek_add_device_ts(void) {}
-#endif
-
-/*
- * SPI devices.
- */
-static struct spi_board_info ek_spi_devices[] = {
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
- { /* DataFlash card */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#endif
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
- {
- .modalias = "ads7846",
- .chip_select = 3,
- .max_speed_hz = 125000 * 26, /* (max sample rate @ 3V) * (cmd + data + overhead) */
- .bus_num = 0,
- .platform_data = &ads_info,
- .irq = NR_IRQS_LEGACY + AT91SAM9263_ID_IRQ1,
- },
-#endif
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct mci_platform_data __initdata mci1_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PE18,
- .wp_pin = AT91_PIN_PE19,
- },
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata ek_macb_data = {
- .phy_irq_pin = AT91_PIN_PE31,
- .is_rmii = 1,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
- {
- .name = "Partition 1",
- .offset = 0,
- .size = SZ_64M,
- },
- {
- .name = "Partition 2",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct atmel_nand_data __initdata ek_nand_data = {
- .ale = 21,
- .cle = 22,
- .det_pin = -EINVAL,
- .rdy_pin = AT91_PIN_PA22,
- .enable_pin = AT91_PIN_PD15,
- .ecc_mode = NAND_ECC_SOFT,
- .on_flash_bbt = 1,
- .parts = ek_nand_partition,
- .num_parts = ARRAY_SIZE(ek_nand_partition),
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 1,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 3,
- .nrd_pulse = 3,
- .ncs_write_pulse = 3,
- .nwe_pulse = 3,
-
- .read_cycle = 5,
- .write_cycle = 5,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
- .tdf_cycles = 2,
-};
-
-static void __init ek_add_device_nand(void)
-{
- ek_nand_data.bus_width_16 = board_have_nand_16bit();
- /* setup bus-width (8 or 16) */
- if (ek_nand_data.bus_width_16)
- ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
- else
- ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(0, 3, &ek_nand_smc_config);
-
- at91_add_device_nand(&ek_nand_data);
-}
-
-
-/*
- * I2C devices
- */
-static struct at24_platform_data at24c512 = {
- .byte_len = SZ_512K / 8,
- .page_size = 128,
- .flags = AT24_FLAG_ADDR16,
-};
-
-
-static struct i2c_board_info __initdata ek_i2c_devices[] = {
- {
- I2C_BOARD_INFO("24c512", 0x50),
- .platform_data = &at24c512,
- },
- /* more devices can be added using expansion connectors */
-};
-
-/*
- * LCD Controller
- */
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static struct fb_videomode at91_tft_vga_modes[] = {
- {
- .name = "TX09D50VM1CCA @ 60",
- .refresh = 60,
- .xres = 240, .yres = 320,
- .pixclock = KHZ2PICOS(4965),
-
- .left_margin = 1, .right_margin = 33,
- .upper_margin = 1, .lower_margin = 0,
- .hsync_len = 5, .vsync_len = 1,
-
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- .vmode = FB_VMODE_NONINTERLACED,
- },
-};
-
-static struct fb_monspecs at91fb_default_monspecs = {
- .manufacturer = "HIT",
- .monitor = "TX09D70VM1CCA",
-
- .modedb = at91_tft_vga_modes,
- .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
- .hfmin = 15000,
- .hfmax = 64000,
- .vfmin = 50,
- .vfmax = 150,
-};
-
-#define AT91SAM9263_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
- | ATMEL_LCDC_DISTYPE_TFT \
- | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-
-static void at91_lcdc_power_control(struct atmel_lcdfb_pdata *pdata, int on)
-{
- at91_set_gpio_value(AT91_PIN_PA30, on);
-}
-
-/* Driver datas */
-static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
- .lcdcon_is_backlight = true,
- .default_bpp = 16,
- .default_dmacon = ATMEL_LCDC_DMAEN,
- .default_lcdcon2 = AT91SAM9263_DEFAULT_LCDCON2,
- .default_monspecs = &at91fb_default_monspecs,
- .atmel_lcdfb_power_control = at91_lcdc_power_control,
- .guard_time = 1,
-};
-
-#else
-static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
-#endif
-
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
- { /* BP1, "leftclic" */
- .code = BTN_LEFT,
- .gpio = AT91_PIN_PC5,
- .active_low = 1,
- .desc = "left_click",
- .wakeup = 1,
- },
- { /* BP2, "rightclic" */
- .code = BTN_RIGHT,
- .gpio = AT91_PIN_PC4,
- .active_low = 1,
- .desc = "right_click",
- .wakeup = 1,
- }
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
- .buttons = ek_buttons,
- .nbuttons = ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &ek_button_data,
- }
-};
-
-static void __init ek_add_device_buttons(void)
-{
- at91_set_GPIO_periph(AT91_PIN_PC5, 1); /* left button */
- at91_set_deglitch(AT91_PIN_PC5, 1);
- at91_set_GPIO_periph(AT91_PIN_PC4, 1); /* right button */
- at91_set_deglitch(AT91_PIN_PC4, 1);
-
- platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-
-/*
- * AC97
- * reset_pin is not connected: NRST
- */
-static struct ac97c_platform_data ek_ac97_data = {
- .reset_pin = -EINVAL,
-};
-
-
-/*
- * LEDs ... these could all be PWM-driven, for variable brightness
- */
-static struct gpio_led ek_leds[] = {
- { /* "right" led, green, userled2 (could be driven by pwm2) */
- .name = "ds2",
- .gpio = AT91_PIN_PC29,
- .active_low = 1,
- .default_trigger = "nand-disk",
- },
- { /* "power" led, yellow (could be driven by pwm0) */
- .name = "ds3",
- .gpio = AT91_PIN_PB7,
- .default_trigger = "heartbeat",
- },
-#if !IS_ENABLED(CONFIG_LEDS_PWM)
- {
- .name = "ds1",
- .gpio = AT91_PIN_PB8,
- .active_low = 1,
- .default_trigger = "none",
- }
-#endif
-};
-
-/*
- * PWM Leds
- */
-static struct pwm_lookup pwm_lookup[] = {
- PWM_LOOKUP("at91sam9rl-pwm", 1, "leds_pwm", "ds1",
- 5000, PWM_POLARITY_INVERSED),
-};
-
-#if IS_ENABLED(CONFIG_LEDS_PWM)
-static struct led_pwm pwm_leds[] = {
- {
- .name = "ds1",
- .max_brightness = 255,
- },
-};
-
-static struct led_pwm_platform_data pwm_data = {
- .num_leds = ARRAY_SIZE(pwm_leds),
- .leds = pwm_leds,
-};
-
-static struct platform_device leds_pwm = {
- .name = "leds_pwm",
- .id = -1,
- .dev = {
- .platform_data = &pwm_data,
- },
-};
-#endif
-
-
-/*
- * CAN
- */
-static void sam9263ek_transceiver_switch(int on)
-{
- if (on) {
- at91_set_gpio_output(AT91_PIN_PA18, 1); /* CANRXEN */
- at91_set_gpio_output(AT91_PIN_PA19, 0); /* CANRS */
- } else {
- at91_set_gpio_output(AT91_PIN_PA18, 0); /* CANRXEN */
- at91_set_gpio_output(AT91_PIN_PA19, 1); /* CANRS */
- }
-}
-
-static struct at91_can_data ek_can_data = {
- .transceiver_switch = sam9263ek_transceiver_switch,
-};
-
-static struct platform_device *devices[] __initdata = {
-#if IS_ENABLED(CONFIG_LEDS_PWM)
- &leds_pwm,
-#endif
-};
-
-static void __init ek_board_init(void)
-{
- at91_register_devices();
-
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9263_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&ek_usbh_data);
- /* USB Device */
- at91_add_device_udc(&ek_udc_data);
- /* SPI */
- at91_set_gpio_output(AT91_PIN_PE20, 1); /* select spi0 clock */
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
- /* Touchscreen */
- ek_add_device_ts();
- /* MMC */
- at91_add_device_mci(1, &mci1_data);
- /* Ethernet */
- at91_add_device_eth(&ek_macb_data);
- /* NAND */
- ek_add_device_nand();
- /* I2C */
- at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
- /* LCD Controller */
- at91_add_device_lcdc(&ek_lcdc_data);
- /* Push Buttons */
- ek_add_device_buttons();
- /* AC97 */
- at91_add_device_ac97(&ek_ac97_data);
- /* LEDs */
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
- pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
-#if IS_ENABLED(CONFIG_LEDS_PWM)
- at91_add_device_pwm(1 << AT91_PWM1);
-#endif
- /* CAN */
- at91_add_device_can(&ek_can_data);
- /* Other platform devices */
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK")
- /* Maintainer: Atmel */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = ek_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ek_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2008 Atmel
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/at73c213.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/clk.h>
-#include <linux/regulator/machine.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/consumer.h>
-
-#include <linux/platform_data/at91_adc.h>
-
-#include <mach/hardware.h>
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/at91sam9_smc.h>
-#include <mach/system_rev.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-#include "gpio.h"
-
-/*
- * board revision encoding
- * bit 0:
- * 0 => 1 sd/mmc slot
- * 1 => 2 sd/mmc slots connectors (board from revision C)
- */
-#define HAVE_2MMC (1 << 0)
-static int inline ek_have_2mmc(void)
-{
- return machine_is_at91sam9g20ek_2mmc() || (system_rev & HAVE_2MMC);
-}
-
-
-static void __init ek_init_early(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata ek_usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata ek_udc_data = {
- .vbus_pin = AT91_PIN_PC5,
- .pullup_pin = -EINVAL, /* pull-up driven by UDC */
-};
-
-
-/*
- * SPI devices.
- */
-static struct spi_board_info ek_spi_devices[] = {
-#if !IS_ENABLED(CONFIG_MMC_ATMELMCI)
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 1,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#if defined(CONFIG_MTD_AT91_DATAFLASH_CARD)
- { /* DataFlash card */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-#endif
-#endif
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata ek_macb_data = {
- .phy_irq_pin = AT91_PIN_PA7,
- .is_rmii = 1,
-};
-
-static void __init ek_add_device_macb(void)
-{
- if (ek_have_2mmc())
- ek_macb_data.phy_irq_pin = AT91_PIN_PB0;
-
- at91_add_device_eth(&ek_macb_data);
-}
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
- {
- .name = "Bootstrap",
- .offset = 0,
- .size = 4 * SZ_1M,
- },
- {
- .name = "Partition 1",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 60 * SZ_1M,
- },
- {
- .name = "Partition 2",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-/* det_pin is not connected */
-static struct atmel_nand_data __initdata ek_nand_data = {
- .ale = 21,
- .cle = 22,
- .rdy_pin = AT91_PIN_PC13,
- .enable_pin = AT91_PIN_PC14,
- .det_pin = -EINVAL,
- .ecc_mode = NAND_ECC_SOFT,
- .on_flash_bbt = 1,
- .parts = ek_nand_partition,
- .num_parts = ARRAY_SIZE(ek_nand_partition),
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 2,
- .ncs_write_setup = 0,
- .nwe_setup = 2,
-
- .ncs_read_pulse = 4,
- .nrd_pulse = 4,
- .ncs_write_pulse = 4,
- .nwe_pulse = 4,
-
- .read_cycle = 7,
- .write_cycle = 7,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
- .tdf_cycles = 3,
-};
-
-static void __init ek_add_device_nand(void)
-{
- ek_nand_data.bus_width_16 = board_have_nand_16bit();
- /* setup bus-width (8 or 16) */
- if (ek_nand_data.bus_width_16)
- ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
- else
- ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(0, 3, &ek_nand_smc_config);
-
- at91_add_device_nand(&ek_nand_data);
-}
-
-
-/*
- * MCI (SD/MMC)
- * wp_pin and vcc_pin are not connected
- */
-static struct mci_platform_data __initdata ek_mmc_data = {
- .slot[1] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PC9,
- .wp_pin = -EINVAL,
- },
-
-};
-
-static void __init ek_add_device_mmc(void)
-{
- if (ek_have_2mmc()) {
- ek_mmc_data.slot[0].bus_width = 4;
- ek_mmc_data.slot[0].detect_pin = AT91_PIN_PC2;
- ek_mmc_data.slot[0].wp_pin = -1;
- }
- at91_add_device_mci(0, &ek_mmc_data);
-}
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
- { /* "bottom" led, green, userled1 to be defined */
- .name = "ds5",
- .gpio = AT91_PIN_PA6,
- .active_low = 1,
- .default_trigger = "none",
- },
- { /* "power" led, yellow */
- .name = "ds1",
- .gpio = AT91_PIN_PA9,
- .default_trigger = "heartbeat",
- }
-};
-
-static void __init ek_add_device_gpio_leds(void)
-{
- if (ek_have_2mmc()) {
- ek_leds[0].gpio = AT91_PIN_PB8;
- ek_leds[1].gpio = AT91_PIN_PB9;
- }
-
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
-}
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
- {
- .gpio = AT91_PIN_PA30,
- .code = BTN_3,
- .desc = "Button 3",
- .active_low = 1,
- .wakeup = 1,
- },
- {
- .gpio = AT91_PIN_PA31,
- .code = BTN_4,
- .desc = "Button 4",
- .active_low = 1,
- .wakeup = 1,
- }
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
- .buttons = ek_buttons,
- .nbuttons = ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &ek_button_data,
- }
-};
-
-static void __init ek_add_device_buttons(void)
-{
- at91_set_gpio_input(AT91_PIN_PA30, 1); /* btn3 */
- at91_set_deglitch(AT91_PIN_PA30, 1);
- at91_set_gpio_input(AT91_PIN_PA31, 1); /* btn4 */
- at91_set_deglitch(AT91_PIN_PA31, 1);
-
- platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-/*
- * ADCs
- */
-
-static struct at91_adc_data ek_adc_data = {
- .channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3),
- .use_external_triggers = true,
- .vref = 3300,
-};
-
-#if defined(CONFIG_REGULATOR_FIXED_VOLTAGE) || defined(CONFIG_REGULATOR_FIXED_VOLTAGE_MODULE)
-static struct regulator_consumer_supply ek_audio_consumer_supplies[] = {
- REGULATOR_SUPPLY("AVDD", "0-001b"),
- REGULATOR_SUPPLY("HPVDD", "0-001b"),
- REGULATOR_SUPPLY("DBVDD", "0-001b"),
- REGULATOR_SUPPLY("DCVDD", "0-001b"),
-};
-
-static struct regulator_init_data ek_avdd_reg_init_data = {
- .constraints = {
- .name = "3V3",
- .valid_ops_mask = REGULATOR_CHANGE_STATUS,
- },
- .consumer_supplies = ek_audio_consumer_supplies,
- .num_consumer_supplies = ARRAY_SIZE(ek_audio_consumer_supplies),
-};
-
-static struct fixed_voltage_config ek_vdd_pdata = {
- .supply_name = "board-3V3",
- .microvolts = 3300000,
- .gpio = -EINVAL,
- .enabled_at_boot = 0,
- .init_data = &ek_avdd_reg_init_data,
-};
-static struct platform_device ek_voltage_regulator = {
- .name = "reg-fixed-voltage",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &ek_vdd_pdata,
- },
-};
-static void __init ek_add_regulators(void)
-{
- platform_device_register(&ek_voltage_regulator);
-}
-#else
-static void __init ek_add_regulators(void) {}
-#endif
-
-
-static struct i2c_board_info __initdata ek_i2c_devices[] = {
- {
- I2C_BOARD_INFO("24c512", 0x50)
- },
- {
- I2C_BOARD_INFO("wm8731", 0x1b)
- },
-};
-
-static struct platform_device sam9g20ek_audio_device = {
- .name = "at91sam9g20ek-audio",
- .id = -1,
-};
-
-static void __init ek_add_device_audio(void)
-{
- platform_device_register(&sam9g20ek_audio_device);
-}
-
-
-static void __init ek_board_init(void)
-{
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_add_device_serial();
- /* USB Host */
- at91_add_device_usbh(&ek_usbh_data);
- /* USB Device */
- at91_add_device_udc(&ek_udc_data);
- /* SPI */
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
- /* NAND */
- ek_add_device_nand();
- /* Ethernet */
- ek_add_device_macb();
- /* Regulators */
- ek_add_regulators();
- /* MMC */
- ek_add_device_mmc();
- /* I2C */
- at91_add_device_i2c(ek_i2c_devices, ARRAY_SIZE(ek_i2c_devices));
- /* LEDs */
- ek_add_device_gpio_leds();
- /* Push Buttons */
- ek_add_device_buttons();
- /* ADCs */
- at91_add_device_adc(&ek_adc_data);
- /* PCK0 provides MCLK to the WM8731 */
- at91_set_B_periph(AT91_PIN_PC1, 0);
- /* SSC (for WM8731) */
- at91_add_device_ssc(AT91SAM9260_ID_SSC, ATMEL_SSC_TX);
- ek_add_device_audio();
-}
-
-MACHINE_START(AT91SAM9G20EK, "Atmel AT91SAM9G20-EK")
- /* Maintainer: Atmel */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = ek_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ek_board_init,
-MACHINE_END
-
-MACHINE_START(AT91SAM9G20EK_2MMC, "Atmel AT91SAM9G20-EK 2 MMC Slot Mod")
- /* Maintainer: Atmel */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = ek_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ek_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * Board-specific setup code for the AT91SAM9M10G45 Evaluation Kit family
- *
- * Covers: * AT91SAM9G45-EKES board
- * * AT91SAM9M10G45-EK board
- *
- * Copyright (C) 2009 Atmel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/fb.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/leds.h>
-#include <linux/atmel-mci.h>
-#include <linux/delay.h>
-#include <linux/pwm.h>
-#include <linux/leds_pwm.h>
-
-#include <linux/platform_data/at91_adc.h>
-
-#include <mach/hardware.h>
-#include <video/atmel_lcdc.h>
-#include <media/soc_camera.h>
-#include <media/atmel-isi.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/at91sam9_smc.h>
-#include <mach/system_rev.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init ek_init_early(void)
-{
- /* Initialize processor: 12.000 MHz crystal */
- at91_initialize(12000000);
-}
-
-/*
- * USB HS Host port (common to OHCI & EHCI)
- */
-static struct at91_usbh_data __initdata ek_usbh_hs_data = {
- .ports = 2,
- .vbus_pin = {AT91_PIN_PD1, AT91_PIN_PD3},
- .vbus_pin_active_low = {1, 1},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-
-/*
- * USB HS Device port
- */
-static struct usba_platform_data __initdata ek_usba_udc_data = {
- .vbus_pin = AT91_PIN_PB19,
-};
-
-
-/*
- * SPI devices.
- */
-static struct spi_board_info ek_spi_devices[] = {
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct mci_platform_data __initdata mci0_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PD10,
- .wp_pin = -EINVAL,
- },
-};
-
-static struct mci_platform_data __initdata mci1_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PD11,
- .wp_pin = AT91_PIN_PD29,
- },
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata ek_macb_data = {
- .phy_irq_pin = AT91_PIN_PD5,
- .is_rmii = 1,
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
- {
- .name = "Partition 1",
- .offset = 0,
- .size = SZ_64M,
- },
- {
- .name = "Partition 2",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-/* det_pin is not connected */
-static struct atmel_nand_data __initdata ek_nand_data = {
- .ale = 21,
- .cle = 22,
- .rdy_pin = AT91_PIN_PC8,
- .enable_pin = AT91_PIN_PC14,
- .det_pin = -EINVAL,
- .ecc_mode = NAND_ECC_SOFT,
- .on_flash_bbt = 1,
- .parts = ek_nand_partition,
- .num_parts = ARRAY_SIZE(ek_nand_partition),
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 2,
- .ncs_write_setup = 0,
- .nwe_setup = 2,
-
- .ncs_read_pulse = 4,
- .nrd_pulse = 4,
- .ncs_write_pulse = 4,
- .nwe_pulse = 4,
-
- .read_cycle = 7,
- .write_cycle = 7,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE,
- .tdf_cycles = 3,
-};
-
-static void __init ek_add_device_nand(void)
-{
- ek_nand_data.bus_width_16 = board_have_nand_16bit();
- /* setup bus-width (8 or 16) */
- if (ek_nand_data.bus_width_16)
- ek_nand_smc_config.mode |= AT91_SMC_DBW_16;
- else
- ek_nand_smc_config.mode |= AT91_SMC_DBW_8;
-
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(0, 3, &ek_nand_smc_config);
-
- at91_add_device_nand(&ek_nand_data);
-}
-
-
-/*
- * ISI
- */
-static struct isi_platform_data __initdata isi_data = {
- .frate = ISI_CFG1_FRATE_CAPTURE_ALL,
- /* to use codec and preview path simultaneously */
- .full_mode = 1,
- .data_width_flags = ISI_DATAWIDTH_8 | ISI_DATAWIDTH_10,
- /* ISI_MCK is provided by programmable clock or external clock */
- .mck_hz = 25000000,
-};
-
-
-/*
- * soc-camera OV2640
- */
-#if defined(CONFIG_SOC_CAMERA_OV2640) || \
- defined(CONFIG_SOC_CAMERA_OV2640_MODULE)
-static unsigned long isi_camera_query_bus_param(struct soc_camera_link *link)
-{
- /* ISI board for ek using default 8-bits connection */
- return SOCAM_DATAWIDTH_8;
-}
-
-static int i2c_camera_power(struct device *dev, int on)
-{
- /* enable or disable the camera */
- pr_debug("%s: %s the camera\n", __func__, on ? "ENABLE" : "DISABLE");
- at91_set_gpio_output(AT91_PIN_PD13, !on);
-
- if (!on)
- goto out;
-
- /* If enabled, give a reset impulse */
- at91_set_gpio_output(AT91_PIN_PD12, 0);
- msleep(20);
- at91_set_gpio_output(AT91_PIN_PD12, 1);
- msleep(100);
-
-out:
- return 0;
-}
-
-static struct i2c_board_info i2c_camera = {
- I2C_BOARD_INFO("ov2640", 0x30),
-};
-
-static struct soc_camera_link iclink_ov2640 = {
- .bus_id = 0,
- .board_info = &i2c_camera,
- .i2c_adapter_id = 0,
- .power = i2c_camera_power,
- .query_bus_param = isi_camera_query_bus_param,
-};
-
-static struct platform_device isi_ov2640 = {
- .name = "soc-camera-pdrv",
- .id = 0,
- .dev = {
- .platform_data = &iclink_ov2640,
- },
-};
-#endif
-
-
-/*
- * LCD Controller
- */
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static struct fb_videomode at91_tft_vga_modes[] = {
- {
- .name = "LG",
- .refresh = 60,
- .xres = 480, .yres = 272,
- .pixclock = KHZ2PICOS(9000),
-
- .left_margin = 1, .right_margin = 1,
- .upper_margin = 40, .lower_margin = 1,
- .hsync_len = 45, .vsync_len = 1,
-
- .sync = 0,
- .vmode = FB_VMODE_NONINTERLACED,
- },
-};
-
-static struct fb_monspecs at91fb_default_monspecs = {
- .manufacturer = "LG",
- .monitor = "LB043WQ1",
-
- .modedb = at91_tft_vga_modes,
- .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
- .hfmin = 15000,
- .hfmax = 17640,
- .vfmin = 57,
- .vfmax = 67,
-};
-
-#define AT91SAM9G45_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
- | ATMEL_LCDC_DISTYPE_TFT \
- | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-
-/* Driver datas */
-static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
- .lcdcon_is_backlight = true,
- .default_bpp = 32,
- .default_dmacon = ATMEL_LCDC_DMAEN,
- .default_lcdcon2 = AT91SAM9G45_DEFAULT_LCDCON2,
- .default_monspecs = &at91fb_default_monspecs,
- .guard_time = 9,
- .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
-};
-
-#else
-static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
-#endif
-
-
-/*
- * ADCs and touchscreen
- */
-static struct at91_adc_data ek_adc_data = {
- .channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5) | BIT(6) | BIT(7),
- .use_external_triggers = true,
- .vref = 3300,
- .touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE,
-};
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
- { /* BP1, "leftclic" */
- .code = BTN_LEFT,
- .gpio = AT91_PIN_PB6,
- .active_low = 1,
- .desc = "left_click",
- .wakeup = 1,
- },
- { /* BP2, "rightclic" */
- .code = BTN_RIGHT,
- .gpio = AT91_PIN_PB7,
- .active_low = 1,
- .desc = "right_click",
- .wakeup = 1,
- },
- /* BP3, "joystick" */
- {
- .code = KEY_LEFT,
- .gpio = AT91_PIN_PB14,
- .active_low = 1,
- .desc = "Joystick Left",
- },
- {
- .code = KEY_RIGHT,
- .gpio = AT91_PIN_PB15,
- .active_low = 1,
- .desc = "Joystick Right",
- },
- {
- .code = KEY_UP,
- .gpio = AT91_PIN_PB16,
- .active_low = 1,
- .desc = "Joystick Up",
- },
- {
- .code = KEY_DOWN,
- .gpio = AT91_PIN_PB17,
- .active_low = 1,
- .desc = "Joystick Down",
- },
- {
- .code = KEY_ENTER,
- .gpio = AT91_PIN_PB18,
- .active_low = 1,
- .desc = "Joystick Press",
- },
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
- .buttons = ek_buttons,
- .nbuttons = ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &ek_button_data,
- }
-};
-
-static void __init ek_add_device_buttons(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(ek_buttons); i++) {
- at91_set_GPIO_periph(ek_buttons[i].gpio, 1);
- at91_set_deglitch(ek_buttons[i].gpio, 1);
- }
-
- platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-
-/*
- * AC97
- * reset_pin is not connected: NRST
- */
-static struct ac97c_platform_data ek_ac97_data = {
- .reset_pin = -EINVAL,
-};
-
-
-/*
- * LEDs ... these could all be PWM-driven, for variable brightness
- */
-static struct gpio_led ek_leds[] = {
- { /* "top" led, red, powerled */
- .name = "d8",
- .gpio = AT91_PIN_PD30,
- .default_trigger = "heartbeat",
- },
- { /* "left" led, green, userled2, pwm3 */
- .name = "d6",
- .gpio = AT91_PIN_PD0,
- .active_low = 1,
- .default_trigger = "nand-disk",
- },
-#if !IS_ENABLED(CONFIG_LEDS_PWM)
- { /* "right" led, green, userled1, pwm1 */
- .name = "d7",
- .gpio = AT91_PIN_PD31,
- .active_low = 1,
- .default_trigger = "mmc0",
- },
-#endif
-};
-
-
-/*
- * PWM Leds
- */
-static struct pwm_lookup pwm_lookup[] = {
- PWM_LOOKUP("at91sam9rl-pwm", 1, "leds_pwm", "d7",
- 5000, PWM_POLARITY_INVERSED),
-};
-
-#if IS_ENABLED(CONFIG_LEDS_PWM)
-static struct led_pwm pwm_leds[] = {
- { /* "right" led, green, userled1, pwm1 */
- .name = "d7",
- .max_brightness = 255,
- },
-};
-
-static struct led_pwm_platform_data pwm_data = {
- .num_leds = ARRAY_SIZE(pwm_leds),
- .leds = pwm_leds,
-};
-
-static struct platform_device leds_pwm = {
- .name = "leds_pwm",
- .id = -1,
- .dev = {
- .platform_data = &pwm_data,
- },
-};
-#endif
-
-static struct platform_device *devices[] __initdata = {
-#if defined(CONFIG_SOC_CAMERA_OV2640) || \
- defined(CONFIG_SOC_CAMERA_OV2640_MODULE)
- &isi_ov2640,
-#endif
-#if IS_ENABLED(CONFIG_LEDS_PWM)
- &leds_pwm,
-#endif
-};
-
-static void __init ek_board_init(void)
-{
- at91_register_devices();
-
- /* Serial */
- /* DGBU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 not connected on the -EK board */
- /* USART1 on ttyS2. (Rx, Tx, RTS, CTS) */
- at91_register_uart(AT91SAM9G45_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_add_device_serial();
- /* USB HS Host */
- at91_add_device_usbh_ohci(&ek_usbh_hs_data);
- at91_add_device_usbh_ehci(&ek_usbh_hs_data);
- /* USB HS Device */
- at91_add_device_usba(&ek_usba_udc_data);
- /* SPI */
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
- /* MMC */
- at91_add_device_mci(0, &mci0_data);
- at91_add_device_mci(1, &mci1_data);
- /* Ethernet */
- at91_add_device_eth(&ek_macb_data);
- /* NAND */
- ek_add_device_nand();
- /* I2C */
- at91_add_device_i2c(0, NULL, 0);
- /* ISI, using programmable clock as ISI_MCK */
- at91_add_device_isi(&isi_data, true);
- /* LCD Controller */
- at91_add_device_lcdc(&ek_lcdc_data);
- /* ADC and touchscreen */
- at91_add_device_adc(&ek_adc_data);
- /* Push Buttons */
- ek_add_device_buttons();
- /* AC97 */
- at91_add_device_ac97(&ek_ac97_data);
- /* LEDs */
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
- pwm_add_table(pwm_lookup, ARRAY_SIZE(pwm_lookup));
-#if IS_ENABLED(CONFIG_LEDS_PWM)
- at91_add_device_pwm(1 << AT91_PWM1);
-#endif
- /* Other platform devices */
- platform_add_devices(devices, ARRAY_SIZE(devices));
-}
-
-MACHINE_START(AT91SAM9M10G45EK, "Atmel AT91SAM9M10G45-EK")
- /* Maintainer: Atmel */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = ek_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ek_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * Copyright (C) 2005 SAN People
- * Copyright (C) 2007 Atmel Corporation
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/fb.h>
-#include <linux/clk.h>
-#include <linux/input.h>
-#include <linux/gpio_keys.h>
-#include <linux/platform_data/at91_adc.h>
-
-#include <video/atmel_lcdc.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/at91sam9_smc.h>
-
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init ek_init_early(void)
-{
- /* Initialize processor: 12.000 MHz crystal */
- at91_initialize(12000000);
-}
-
-/*
- * USB HS Device port
- */
-static struct usba_platform_data __initdata ek_usba_udc_data = {
- .vbus_pin = AT91_PIN_PA8,
-};
-
-
-/*
- * MCI (SD/MMC)
- */
-static struct mci_platform_data __initdata mci0_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PA15,
- .wp_pin = -EINVAL,
- },
-};
-
-
-/*
- * NAND flash
- */
-static struct mtd_partition __initdata ek_nand_partition[] = {
- {
- .name = "Partition 1",
- .offset = 0,
- .size = SZ_256K,
- },
- {
- .name = "Partition 2",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct atmel_nand_data __initdata ek_nand_data = {
- .ale = 21,
- .cle = 22,
- .det_pin = -EINVAL,
- .rdy_pin = AT91_PIN_PD17,
- .enable_pin = AT91_PIN_PB6,
- .ecc_mode = NAND_ECC_SOFT,
- .on_flash_bbt = 1,
- .parts = ek_nand_partition,
- .num_parts = ARRAY_SIZE(ek_nand_partition),
-};
-
-static struct sam9_smc_config __initdata ek_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 1,
- .ncs_write_setup = 0,
- .nwe_setup = 1,
-
- .ncs_read_pulse = 3,
- .nrd_pulse = 3,
- .ncs_write_pulse = 3,
- .nwe_pulse = 3,
-
- .read_cycle = 5,
- .write_cycle = 5,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
- .tdf_cycles = 2,
-};
-
-static void __init ek_add_device_nand(void)
-{
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(0, 3, &ek_nand_smc_config);
-
- at91_add_device_nand(&ek_nand_data);
-}
-
-
-/*
- * SPI devices
- */
-static struct spi_board_info ek_spi_devices[] = {
- { /* DataFlash chip */
- .modalias = "mtd_dataflash",
- .chip_select = 0,
- .max_speed_hz = 15 * 1000 * 1000,
- .bus_num = 0,
- },
-};
-
-
-/*
- * LCD Controller
- */
-#if defined(CONFIG_FB_ATMEL) || defined(CONFIG_FB_ATMEL_MODULE)
-static struct fb_videomode at91_tft_vga_modes[] = {
- {
- .name = "TX09D50VM1CCA @ 60",
- .refresh = 60,
- .xres = 240, .yres = 320,
- .pixclock = KHZ2PICOS(4965),
-
- .left_margin = 1, .right_margin = 33,
- .upper_margin = 1, .lower_margin = 0,
- .hsync_len = 5, .vsync_len = 1,
-
- .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
- .vmode = FB_VMODE_NONINTERLACED,
- },
-};
-
-static struct fb_monspecs at91fb_default_monspecs = {
- .manufacturer = "HIT",
- .monitor = "TX09D50VM1CCA",
-
- .modedb = at91_tft_vga_modes,
- .modedb_len = ARRAY_SIZE(at91_tft_vga_modes),
- .hfmin = 15000,
- .hfmax = 64000,
- .vfmin = 50,
- .vfmax = 150,
-};
-
-#define AT91SAM9RL_DEFAULT_LCDCON2 (ATMEL_LCDC_MEMOR_LITTLE \
- | ATMEL_LCDC_DISTYPE_TFT \
- | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE)
-
-static void at91_lcdc_power_control(struct atmel_lcdfb_pdata *pdata, int on)
-{
- if (on)
- at91_set_gpio_value(AT91_PIN_PC1, 0); /* power up */
- else
- at91_set_gpio_value(AT91_PIN_PC1, 1); /* power down */
-}
-
-/* Driver datas */
-static struct atmel_lcdfb_pdata __initdata ek_lcdc_data = {
- .lcdcon_is_backlight = true,
- .default_bpp = 16,
- .default_dmacon = ATMEL_LCDC_DMAEN,
- .default_lcdcon2 = AT91SAM9RL_DEFAULT_LCDCON2,
- .default_monspecs = &at91fb_default_monspecs,
- .atmel_lcdfb_power_control = at91_lcdc_power_control,
- .guard_time = 1,
- .lcd_wiring_mode = ATMEL_LCDC_WIRING_RGB,
-};
-
-#else
-static struct atmel_lcdfb_pdata __initdata ek_lcdc_data;
-#endif
-
-
-/*
- * AC97
- * reset_pin is not connected: NRST
- */
-static struct ac97c_platform_data ek_ac97_data = {
- .reset_pin = -EINVAL,
-};
-
-
-/*
- * LEDs
- */
-static struct gpio_led ek_leds[] = {
- { /* "bottom" led, green, userled1 to be defined */
- .name = "ds1",
- .gpio = AT91_PIN_PD15,
- .active_low = 1,
- .default_trigger = "none",
- },
- { /* "bottom" led, green, userled2 to be defined */
- .name = "ds2",
- .gpio = AT91_PIN_PD16,
- .active_low = 1,
- .default_trigger = "none",
- },
- { /* "power" led, yellow */
- .name = "ds3",
- .gpio = AT91_PIN_PD14,
- .default_trigger = "heartbeat",
- }
-};
-
-
-/*
- * ADC + Touchscreen
- */
-static struct at91_adc_data ek_adc_data = {
- .channels_used = BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(4) | BIT(5),
- .use_external_triggers = true,
- .vref = 3300,
- .touchscreen_type = ATMEL_ADC_TOUCHSCREEN_4WIRE,
-};
-
-
-/*
- * GPIO Buttons
- */
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button ek_buttons[] = {
- {
- .gpio = AT91_PIN_PB0,
- .code = BTN_2,
- .desc = "Right Click",
- .active_low = 1,
- .wakeup = 1,
- },
- {
- .gpio = AT91_PIN_PB1,
- .code = BTN_1,
- .desc = "Left Click",
- .active_low = 1,
- .wakeup = 1,
- }
-};
-
-static struct gpio_keys_platform_data ek_button_data = {
- .buttons = ek_buttons,
- .nbuttons = ARRAY_SIZE(ek_buttons),
-};
-
-static struct platform_device ek_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &ek_button_data,
- }
-};
-
-static void __init ek_add_device_buttons(void)
-{
- at91_set_gpio_input(AT91_PIN_PB1, 1); /* btn1 */
- at91_set_deglitch(AT91_PIN_PB1, 1);
- at91_set_gpio_input(AT91_PIN_PB0, 1); /* btn2 */
- at91_set_deglitch(AT91_PIN_PB0, 1);
-
- platform_device_register(&ek_button_device);
-}
-#else
-static void __init ek_add_device_buttons(void) {}
-#endif
-
-
-static void __init ek_board_init(void)
-{
- at91_register_devices();
-
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9RL_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_add_device_serial();
- /* USB HS */
- at91_add_device_usba(&ek_usba_udc_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* NAND */
- ek_add_device_nand();
- /* SPI */
- at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices));
- /* MMC */
- at91_add_device_mci(0, &mci0_data);
- /* LCD Controller */
- at91_add_device_lcdc(&ek_lcdc_data);
- /* AC97 */
- at91_add_device_ac97(&ek_ac97_data);
- /* Touch Screen Controller + ADC */
- at91_add_device_adc(&ek_adc_data);
- /* LEDs */
- at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds));
- /* Push Buttons */
- ek_add_device_buttons();
-}
-
-MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK")
- /* Maintainer: Atmel */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = ek_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = ek_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/board-snapper9260.c
- *
- * Copyright (C) 2010 Bluewater System Ltd
- *
- * Author: Andre Renaud <andre@bluewatersys.com>
- * Author: Ryan Mallon
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- */
-
-#include <linux/init.h>
-#include <linux/gpio.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/platform_data/pca953x.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/hardware.h>
-#include <mach/at91sam9_smc.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-#include "gpio.h"
-
-#define SNAPPER9260_IO_EXP_GPIO(x) (NR_BUILTIN_GPIO + (x))
-
-static void __init snapper9260_init_early(void)
-{
- at91_initialize(18432000);
-}
-
-static struct at91_usbh_data __initdata snapper9260_usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-static struct at91_udc_data __initdata snapper9260_udc_data = {
- .vbus_pin = SNAPPER9260_IO_EXP_GPIO(5),
- .vbus_active_low = 1,
- .vbus_polled = 1,
- .pullup_pin = -EINVAL,
-};
-
-static struct macb_platform_data snapper9260_macb_data = {
- .phy_irq_pin = -EINVAL,
- .is_rmii = 1,
-};
-
-static struct mtd_partition __initdata snapper9260_nand_partitions[] = {
- {
- .name = "Preboot",
- .offset = 0,
- .size = SZ_128K,
- },
- {
- .name = "Bootloader",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_256K,
- },
- {
- .name = "Environment",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_128K,
- },
- {
- .name = "Kernel",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_4M,
- },
- {
- .name = "Filesystem",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct atmel_nand_data __initdata snapper9260_nand_data = {
- .ale = 21,
- .cle = 22,
- .rdy_pin = AT91_PIN_PC13,
- .parts = snapper9260_nand_partitions,
- .num_parts = ARRAY_SIZE(snapper9260_nand_partitions),
- .bus_width_16 = 0,
- .enable_pin = -EINVAL,
- .det_pin = -EINVAL,
- .ecc_mode = NAND_ECC_SOFT,
-};
-
-static struct sam9_smc_config __initdata snapper9260_nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 0,
- .ncs_write_setup = 0,
- .nwe_setup = 0,
-
- .ncs_read_pulse = 5,
- .nrd_pulse = 2,
- .ncs_write_pulse = 5,
- .nwe_pulse = 2,
-
- .read_cycle = 7,
- .write_cycle = 7,
-
- .mode = (AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
- AT91_SMC_EXNWMODE_DISABLE),
- .tdf_cycles = 1,
-};
-
-static struct pca953x_platform_data snapper9260_io_expander_data = {
- .gpio_base = SNAPPER9260_IO_EXP_GPIO(0),
-};
-
-static struct i2c_board_info __initdata snapper9260_i2c_devices[] = {
- {
- /* IO expander */
- I2C_BOARD_INFO("max7312", 0x28),
- .platform_data = &snapper9260_io_expander_data,
- },
- {
- /* Audio codec */
- I2C_BOARD_INFO("tlv320aic23", 0x1a),
- },
-};
-
-static struct i2c_board_info __initdata snapper9260_i2c_isl1208 = {
- /* RTC */
- I2C_BOARD_INFO("isl1208", 0x6f),
-};
-
-static void __init snapper9260_add_device_nand(void)
-{
- at91_set_A_periph(AT91_PIN_PC14, 0);
- sam9_smc_configure(0, 3, &snapper9260_nand_smc_config);
- at91_add_device_nand(&snapper9260_nand_data);
-}
-
-static void __init snapper9260_board_init(void)
-{
- at91_register_devices();
-
- at91_add_device_i2c(snapper9260_i2c_devices,
- ARRAY_SIZE(snapper9260_i2c_devices));
-
- snapper9260_i2c_isl1208.irq = gpio_to_irq(AT91_PIN_PA31);
- i2c_register_board_info(0, &snapper9260_i2c_isl1208, 1);
-
- /* Debug on ttyS0 */
- at91_register_uart(0, 0, 0);
-
- at91_register_uart(AT91SAM9260_ID_US0, 1,
- ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_register_uart(AT91SAM9260_ID_US1, 2,
- ATMEL_UART_CTS | ATMEL_UART_RTS);
- at91_register_uart(AT91SAM9260_ID_US2, 3, 0);
- at91_add_device_serial();
- at91_add_device_usbh(&snapper9260_usbh_data);
- at91_add_device_udc(&snapper9260_udc_data);
- at91_add_device_eth(&snapper9260_macb_data);
- at91_add_device_ssc(AT91SAM9260_ID_SSC, (ATMEL_SSC_TF | ATMEL_SSC_TK |
- ATMEL_SSC_TD | ATMEL_SSC_RD));
- snapper9260_add_device_nand();
-}
-
-MACHINE_START(SNAPPER_9260, "Bluewater Systems Snapper 9260/9G20 module")
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = snapper9260_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = snapper9260_board_init,
-MACHINE_END
-
-
+++ /dev/null
-/*
- * Copyright (C) 2010 Christian Glindkamp <christian.glindkamp@taskit.de>
- * taskit GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/mm.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/w1-gpio.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include <mach/at91sam9_smc.h>
-#include <mach/hardware.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "sam9_smc.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-void __init stamp9g20_init_early(void)
-{
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-/*
- * NAND flash
- */
-static struct atmel_nand_data __initdata nand_data = {
- .ale = 21,
- .cle = 22,
- .rdy_pin = AT91_PIN_PC13,
- .enable_pin = AT91_PIN_PC14,
- .bus_width_16 = 0,
- .det_pin = -EINVAL,
- .ecc_mode = NAND_ECC_SOFT,
-};
-
-static struct sam9_smc_config __initdata nand_smc_config = {
- .ncs_read_setup = 0,
- .nrd_setup = 2,
- .ncs_write_setup = 0,
- .nwe_setup = 2,
-
- .ncs_read_pulse = 4,
- .nrd_pulse = 4,
- .ncs_write_pulse = 4,
- .nwe_pulse = 4,
-
- .read_cycle = 7,
- .write_cycle = 7,
-
- .mode = AT91_SMC_READMODE | AT91_SMC_WRITEMODE | AT91_SMC_EXNWMODE_DISABLE | AT91_SMC_DBW_8,
- .tdf_cycles = 3,
-};
-
-static void __init add_device_nand(void)
-{
- /* configure chip-select 3 (NAND) */
- sam9_smc_configure(0, 3, &nand_smc_config);
-
- at91_add_device_nand(&nand_data);
-}
-
-
-/*
- * MCI (SD/MMC)
- * det_pin, wp_pin and vcc_pin are not connected
- */
-static struct mci_platform_data __initdata mmc_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = -1,
- .wp_pin = -1,
- },
-};
-
-
-/*
- * USB Host port
- */
-static struct at91_usbh_data __initdata usbh_data = {
- .ports = 2,
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-
-/*
- * USB Device port
- */
-static struct at91_udc_data __initdata portuxg20_udc_data = {
- .vbus_pin = AT91_PIN_PC7,
- .pullup_pin = -EINVAL, /* pull-up driven by UDC */
-};
-
-static struct at91_udc_data __initdata stamp9g20evb_udc_data = {
- .vbus_pin = AT91_PIN_PA22,
- .pullup_pin = -EINVAL, /* pull-up driven by UDC */
-};
-
-
-/*
- * MACB Ethernet device
- */
-static struct macb_platform_data __initdata macb_data = {
- .phy_irq_pin = AT91_PIN_PA28,
- .is_rmii = 1,
-};
-
-
-/*
- * LEDs
- */
-static struct gpio_led portuxg20_leds[] = {
- {
- .name = "LED2",
- .gpio = AT91_PIN_PC5,
- .default_trigger = "none",
- }, {
- .name = "LED3",
- .gpio = AT91_PIN_PC4,
- .default_trigger = "none",
- }, {
- .name = "LED4",
- .gpio = AT91_PIN_PC10,
- .default_trigger = "heartbeat",
- }
-};
-
-static struct gpio_led stamp9g20evb_leds[] = {
- {
- .name = "D8",
- .gpio = AT91_PIN_PB18,
- .active_low = 1,
- .default_trigger = "none",
- }, {
- .name = "D9",
- .gpio = AT91_PIN_PB19,
- .active_low = 1,
- .default_trigger = "none",
- }, {
- .name = "D10",
- .gpio = AT91_PIN_PB20,
- .active_low = 1,
- .default_trigger = "heartbeat",
- }
-};
-
-
-/*
- * SPI devices
- */
-static struct spi_board_info portuxg20_spi_devices[] = {
- {
- .modalias = "spidev",
- .chip_select = 0,
- .max_speed_hz = 1 * 1000 * 1000,
- .bus_num = 0,
- }, {
- .modalias = "spidev",
- .chip_select = 0,
- .max_speed_hz = 1 * 1000 * 1000,
- .bus_num = 1,
- },
-};
-
-
-/*
- * Dallas 1-Wire
- */
-static struct w1_gpio_platform_data w1_gpio_pdata = {
- .pin = AT91_PIN_PA29,
- .is_open_drain = 1,
- .ext_pullup_enable_pin = -EINVAL,
-};
-
-static struct platform_device w1_device = {
- .name = "w1-gpio",
- .id = -1,
- .dev.platform_data = &w1_gpio_pdata,
-};
-
-void add_w1(void)
-{
- at91_set_GPIO_periph(w1_gpio_pdata.pin, 1);
- at91_set_multi_drive(w1_gpio_pdata.pin, 1);
- platform_device_register(&w1_device);
-}
-
-
-void __init stamp9g20_board_init(void)
-{
- /* Serial */
- /* DGBU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
- at91_add_device_serial();
- /* NAND */
- add_device_nand();
- /* MMC */
- at91_add_device_mci(0, &mmc_data);
- /* W1 */
- add_w1();
-}
-
-static void __init portuxg20_board_init(void)
-{
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR
- | ATMEL_UART_DCD | ATMEL_UART_RI);
-
- /* USART1 on ttyS2. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9260_ID_US1, 2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* USART2 on ttyS3. (Rx, Tx, CTS, RTS) */
- at91_register_uart(AT91SAM9260_ID_US2, 3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-
- /* USART4 on ttyS5. (Rx, Tx only) */
- at91_register_uart(AT91SAM9260_ID_US4, 5, 0);
-
- /* USART5 on ttyS6. (Rx, Tx only) */
- at91_register_uart(AT91SAM9260_ID_US5, 6, 0);
- stamp9g20_board_init();
- /* USB Host */
- at91_add_device_usbh(&usbh_data);
- /* USB Device */
- at91_add_device_udc(&portuxg20_udc_data);
- /* Ethernet */
- at91_add_device_eth(&macb_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* SPI */
- at91_add_device_spi(portuxg20_spi_devices, ARRAY_SIZE(portuxg20_spi_devices));
- /* LEDs */
- at91_gpio_leds(portuxg20_leds, ARRAY_SIZE(portuxg20_leds));
-}
-
-static void __init stamp9g20evb_board_init(void)
-{
- /* USART0 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91SAM9260_ID_US0, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR
- | ATMEL_UART_DCD | ATMEL_UART_RI);
- stamp9g20_board_init();
- /* USB Host */
- at91_add_device_usbh(&usbh_data);
- /* USB Device */
- at91_add_device_udc(&stamp9g20evb_udc_data);
- /* Ethernet */
- at91_add_device_eth(&macb_data);
- /* I2C */
- at91_add_device_i2c(NULL, 0);
- /* LEDs */
- at91_gpio_leds(stamp9g20evb_leds, ARRAY_SIZE(stamp9g20evb_leds));
-}
-
-MACHINE_START(PORTUXG20, "taskit PortuxG20")
- /* Maintainer: taskit GmbH */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = stamp9g20_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = portuxg20_board_init,
-MACHINE_END
-
-MACHINE_START(STAMP9G20, "taskit Stamp9G20")
- /* Maintainer: taskit GmbH */
- .init_time = at91_init_time,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = stamp9g20_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = stamp9g20evb_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/board-yl-9200.c
- *
- * Adapted from various board files in arch/arm/mach-at91
- *
- * Modifications for YL-9200 platform:
- * Copyright (C) 2007 S. Birtles
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/gpio.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
-#include <linux/mtd/physmap.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <asm/setup.h>
-#include <asm/mach-types.h>
-#include <asm/irq.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/at91rm9200_mc.h>
-#include <mach/at91_ramc.h>
-#include <mach/cpu.h>
-
-#include "at91_aic.h"
-#include "board.h"
-#include "generic.h"
-#include "gpio.h"
-
-
-static void __init yl9200_init_early(void)
-{
- /* Set cpu type: PQFP */
- at91rm9200_set_type(ARCH_REVISON_9200_PQFP);
-
- /* Initialize processor: 18.432 MHz crystal */
- at91_initialize(18432000);
-}
-
-/*
- * LEDs
- */
-static struct gpio_led yl9200_leds[] = {
- { /* D2 */
- .name = "led2",
- .gpio = AT91_PIN_PB17,
- .active_low = 1,
- .default_trigger = "timer",
- },
- { /* D3 */
- .name = "led3",
- .gpio = AT91_PIN_PB16,
- .active_low = 1,
- .default_trigger = "heartbeat",
- },
- { /* D4 */
- .name = "led4",
- .gpio = AT91_PIN_PB15,
- .active_low = 1,
- },
- { /* D5 */
- .name = "led5",
- .gpio = AT91_PIN_PB8,
- .active_low = 1,
- }
-};
-
-/*
- * Ethernet
- */
-static struct macb_platform_data __initdata yl9200_eth_data = {
- .phy_irq_pin = AT91_PIN_PB28,
- .is_rmii = 1,
-};
-
-/*
- * USB Host
- */
-static struct at91_usbh_data __initdata yl9200_usbh_data = {
- .ports = 1, /* PQFP version of AT91RM9200 */
- .vbus_pin = {-EINVAL, -EINVAL},
- .overcurrent_pin= {-EINVAL, -EINVAL},
-};
-
-/*
- * USB Device
- */
-static struct at91_udc_data __initdata yl9200_udc_data = {
- .pullup_pin = AT91_PIN_PC4,
- .vbus_pin = AT91_PIN_PC5,
- .pullup_active_low = 1, /* Active Low due to PNP transistor (pg 7) */
-
-};
-
-/*
- * MMC
- */
-static struct mci_platform_data __initdata yl9200_mci0_data = {
- .slot[0] = {
- .bus_width = 4,
- .detect_pin = AT91_PIN_PB9,
- .wp_pin = -EINVAL,
- },
-};
-
-/*
- * NAND Flash
- */
-static struct mtd_partition __initdata yl9200_nand_partition[] = {
- {
- .name = "AT91 NAND partition 1, boot",
- .offset = 0,
- .size = SZ_256K
- },
- {
- .name = "AT91 NAND partition 2, kernel",
- .offset = MTDPART_OFS_NXTBLK,
- .size = (2 * SZ_1M) - SZ_256K
- },
- {
- .name = "AT91 NAND partition 3, filesystem",
- .offset = MTDPART_OFS_NXTBLK,
- .size = 14 * SZ_1M
- },
- {
- .name = "AT91 NAND partition 4, storage",
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_16M
- },
- {
- .name = "AT91 NAND partition 5, ext-fs",
- .offset = MTDPART_OFS_NXTBLK,
- .size = SZ_32M
- }
-};
-
-static struct atmel_nand_data __initdata yl9200_nand_data = {
- .ale = 6,
- .cle = 7,
- .det_pin = -EINVAL,
- .rdy_pin = AT91_PIN_PC14, /* R/!B (Sheet10) */
- .enable_pin = AT91_PIN_PC15, /* !CE (Sheet10) */
- .ecc_mode = NAND_ECC_SOFT,
- .parts = yl9200_nand_partition,
- .num_parts = ARRAY_SIZE(yl9200_nand_partition),
-};
-
-/*
- * NOR Flash
- */
-#define YL9200_FLASH_BASE AT91_CHIPSELECT_0
-#define YL9200_FLASH_SIZE SZ_16M
-
-static struct mtd_partition yl9200_flash_partitions[] = {
- {
- .name = "Bootloader",
- .offset = 0,
- .size = SZ_256K,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- {
- .name = "Kernel",
- .offset = MTDPART_OFS_NXTBLK,
- .size = (2 * SZ_1M) - SZ_256K
- },
- {
- .name = "Filesystem",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL
- }
-};
-
-static struct physmap_flash_data yl9200_flash_data = {
- .width = 2,
- .parts = yl9200_flash_partitions,
- .nr_parts = ARRAY_SIZE(yl9200_flash_partitions),
-};
-
-static struct resource yl9200_flash_resources[] = {
- {
- .start = YL9200_FLASH_BASE,
- .end = YL9200_FLASH_BASE + YL9200_FLASH_SIZE - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct platform_device yl9200_flash = {
- .name = "physmap-flash",
- .id = 0,
- .dev = {
- .platform_data = &yl9200_flash_data,
- },
- .resource = yl9200_flash_resources,
- .num_resources = ARRAY_SIZE(yl9200_flash_resources),
-};
-
-/*
- * I2C (TWI)
- */
-static struct i2c_board_info __initdata yl9200_i2c_devices[] = {
- { /* EEPROM */
- I2C_BOARD_INFO("24c128", 0x50),
- }
-};
-
-/*
- * GPIO Buttons
-*/
-#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE)
-static struct gpio_keys_button yl9200_buttons[] = {
- {
- .gpio = AT91_PIN_PA24,
- .code = BTN_2,
- .desc = "SW2",
- .active_low = 1,
- .wakeup = 1,
- },
- {
- .gpio = AT91_PIN_PB1,
- .code = BTN_3,
- .desc = "SW3",
- .active_low = 1,
- .wakeup = 1,
- },
- {
- .gpio = AT91_PIN_PB2,
- .code = BTN_4,
- .desc = "SW4",
- .active_low = 1,
- .wakeup = 1,
- },
- {
- .gpio = AT91_PIN_PB6,
- .code = BTN_5,
- .desc = "SW5",
- .active_low = 1,
- .wakeup = 1,
- }
-};
-
-static struct gpio_keys_platform_data yl9200_button_data = {
- .buttons = yl9200_buttons,
- .nbuttons = ARRAY_SIZE(yl9200_buttons),
-};
-
-static struct platform_device yl9200_button_device = {
- .name = "gpio-keys",
- .id = -1,
- .num_resources = 0,
- .dev = {
- .platform_data = &yl9200_button_data,
- }
-};
-
-static void __init yl9200_add_device_buttons(void)
-{
- at91_set_gpio_input(AT91_PIN_PA24, 1); /* SW2 */
- at91_set_deglitch(AT91_PIN_PA24, 1);
- at91_set_gpio_input(AT91_PIN_PB1, 1); /* SW3 */
- at91_set_deglitch(AT91_PIN_PB1, 1);
- at91_set_gpio_input(AT91_PIN_PB2, 1); /* SW4 */
- at91_set_deglitch(AT91_PIN_PB2, 1);
- at91_set_gpio_input(AT91_PIN_PB6, 1); /* SW5 */
- at91_set_deglitch(AT91_PIN_PB6, 1);
-
- /* Enable buttons (Sheet 5) */
- at91_set_gpio_output(AT91_PIN_PB7, 1);
-
- platform_device_register(&yl9200_button_device);
-}
-#else
-static void __init yl9200_add_device_buttons(void) {}
-#endif
-
-/*
- * Touchscreen
- */
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
-static int ads7843_pendown_state(void)
-{
- return !at91_get_gpio_value(AT91_PIN_PB11); /* Touchscreen PENIRQ */
-}
-
-static struct ads7846_platform_data ads_info = {
- .model = 7843,
- .x_min = 150,
- .x_max = 3830,
- .y_min = 190,
- .y_max = 3830,
- .vref_delay_usecs = 100,
-
- /* For a 8" touch-screen */
- // .x_plate_ohms = 603,
- // .y_plate_ohms = 332,
-
- /* For a 10.4" touch-screen */
- // .x_plate_ohms = 611,
- // .y_plate_ohms = 325,
-
- .x_plate_ohms = 576,
- .y_plate_ohms = 366,
-
- .pressure_max = 15000, /* generally nonsense on the 7843 */
- .debounce_max = 1,
- .debounce_rep = 0,
- .debounce_tol = (~0),
- .get_pendown_state = ads7843_pendown_state,
-};
-
-static void __init yl9200_add_device_ts(void)
-{
- at91_set_gpio_input(AT91_PIN_PB11, 1); /* Touchscreen interrupt pin */
- at91_set_gpio_input(AT91_PIN_PB10, 1); /* Touchscreen BUSY signal - not used! */
-}
-#else
-static void __init yl9200_add_device_ts(void) {}
-#endif
-
-/*
- * SPI devices
- */
-static struct spi_board_info yl9200_spi_devices[] = {
-#if defined(CONFIG_TOUCHSCREEN_ADS7846) || defined(CONFIG_TOUCHSCREEN_ADS7846_MODULE)
- { /* Touchscreen */
- .modalias = "ads7846",
- .chip_select = 0,
- .max_speed_hz = 5000 * 26,
- .platform_data = &ads_info,
- .irq = AT91_PIN_PB11,
- },
-#endif
- { /* CAN */
- .modalias = "mcp2510",
- .chip_select = 1,
- .max_speed_hz = 25000 * 26,
- .irq = AT91_PIN_PC0,
- }
-};
-
-/*
- * LCD / VGA
- *
- * EPSON S1D13806 FB (discontinued chip)
- * EPSON S1D13506 FB
- */
-#if defined(CONFIG_FB_S1D13XXX) || defined(CONFIG_FB_S1D13XXX_MODULE)
-#include <video/s1d13xxxfb.h>
-
-
-static void yl9200_init_video(void)
-{
- /* NWAIT Signal */
- at91_set_A_periph(AT91_PIN_PC6, 0);
-
- /* Initialization of the Static Memory Controller for Chip Select 2 */
- at91_ramc_write(0, AT91_SMC_CSR(2), AT91_SMC_DBW_16 /* 16 bit */
- | AT91_SMC_WSEN | AT91_SMC_NWS_(0x4) /* wait states */
- | AT91_SMC_TDF_(0x100) /* float time */
- );
-}
-
-static struct s1d13xxxfb_regval yl9200_s1dfb_initregs[] =
-{
- {S1DREG_MISC, 0x00}, /* Miscellaneous Register*/
- {S1DREG_COM_DISP_MODE, 0x01}, /* Display Mode Register, LCD only*/
- {S1DREG_GPIO_CNF0, 0x00}, /* General IO Pins Configuration Register*/
- {S1DREG_GPIO_CTL0, 0x00}, /* General IO Pins Control Register*/
- {S1DREG_CLK_CNF, 0x11}, /* Memory Clock Configuration Register*/
- {S1DREG_LCD_CLK_CNF, 0x10}, /* LCD Pixel Clock Configuration Register*/
- {S1DREG_CRT_CLK_CNF, 0x12}, /* CRT/TV Pixel Clock Configuration Register*/
- {S1DREG_MPLUG_CLK_CNF, 0x01}, /* MediaPlug Clock Configuration Register*/
- {S1DREG_CPU2MEM_WST_SEL, 0x02}, /* CPU To Memory Wait State Select Register*/
- {S1DREG_MEM_CNF, 0x00}, /* Memory Configuration Register*/
- {S1DREG_SDRAM_REF_RATE, 0x04}, /* DRAM Refresh Rate Register, MCLK source*/
- {S1DREG_SDRAM_TC0, 0x12}, /* DRAM Timings Control Register 0*/
- {S1DREG_SDRAM_TC1, 0x02}, /* DRAM Timings Control Register 1*/
- {S1DREG_PANEL_TYPE, 0x25}, /* Panel Type Register*/
- {S1DREG_MOD_RATE, 0x00}, /* MOD Rate Register*/
- {S1DREG_LCD_DISP_HWIDTH, 0x4F}, /* LCD Horizontal Display Width Register*/
- {S1DREG_LCD_NDISP_HPER, 0x13}, /* LCD Horizontal Non-Display Period Register*/
- {S1DREG_TFT_FPLINE_START, 0x01}, /* TFT FPLINE Start Position Register*/
- {S1DREG_TFT_FPLINE_PWIDTH, 0x0c}, /* TFT FPLINE Pulse Width Register*/
- {S1DREG_LCD_DISP_VHEIGHT0, 0xDF}, /* LCD Vertical Display Height Register 0*/
- {S1DREG_LCD_DISP_VHEIGHT1, 0x01}, /* LCD Vertical Display Height Register 1*/
- {S1DREG_LCD_NDISP_VPER, 0x2c}, /* LCD Vertical Non-Display Period Register*/
- {S1DREG_TFT_FPFRAME_START, 0x0a}, /* TFT FPFRAME Start Position Register*/
- {S1DREG_TFT_FPFRAME_PWIDTH, 0x02}, /* TFT FPFRAME Pulse Width Register*/
- {S1DREG_LCD_DISP_MODE, 0x05}, /* LCD Display Mode Register*/
- {S1DREG_LCD_MISC, 0x01}, /* LCD Miscellaneous Register*/
- {S1DREG_LCD_DISP_START0, 0x00}, /* LCD Display Start Address Register 0*/
- {S1DREG_LCD_DISP_START1, 0x00}, /* LCD Display Start Address Register 1*/
- {S1DREG_LCD_DISP_START2, 0x00}, /* LCD Display Start Address Register 2*/
- {S1DREG_LCD_MEM_OFF0, 0x80}, /* LCD Memory Address Offset Register 0*/
- {S1DREG_LCD_MEM_OFF1, 0x02}, /* LCD Memory Address Offset Register 1*/
- {S1DREG_LCD_PIX_PAN, 0x03}, /* LCD Pixel Panning Register*/
- {S1DREG_LCD_DISP_FIFO_HTC, 0x00}, /* LCD Display FIFO High Threshold Control Register*/
- {S1DREG_LCD_DISP_FIFO_LTC, 0x00}, /* LCD Display FIFO Low Threshold Control Register*/
- {S1DREG_CRT_DISP_HWIDTH, 0x4F}, /* CRT/TV Horizontal Display Width Register*/
- {S1DREG_CRT_NDISP_HPER, 0x13}, /* CRT/TV Horizontal Non-Display Period Register*/
- {S1DREG_CRT_HRTC_START, 0x01}, /* CRT/TV HRTC Start Position Register*/
- {S1DREG_CRT_HRTC_PWIDTH, 0x0B}, /* CRT/TV HRTC Pulse Width Register*/
- {S1DREG_CRT_DISP_VHEIGHT0, 0xDF}, /* CRT/TV Vertical Display Height Register 0*/
- {S1DREG_CRT_DISP_VHEIGHT1, 0x01}, /* CRT/TV Vertical Display Height Register 1*/
- {S1DREG_CRT_NDISP_VPER, 0x2B}, /* CRT/TV Vertical Non-Display Period Register*/
- {S1DREG_CRT_VRTC_START, 0x09}, /* CRT/TV VRTC Start Position Register*/
- {S1DREG_CRT_VRTC_PWIDTH, 0x01}, /* CRT/TV VRTC Pulse Width Register*/
- {S1DREG_TV_OUT_CTL, 0x18}, /* TV Output Control Register */
- {S1DREG_CRT_DISP_MODE, 0x05}, /* CRT/TV Display Mode Register, 16BPP*/
- {S1DREG_CRT_DISP_START0, 0x00}, /* CRT/TV Display Start Address Register 0*/
- {S1DREG_CRT_DISP_START1, 0x00}, /* CRT/TV Display Start Address Register 1*/
- {S1DREG_CRT_DISP_START2, 0x00}, /* CRT/TV Display Start Address Register 2*/
- {S1DREG_CRT_MEM_OFF0, 0x80}, /* CRT/TV Memory Address Offset Register 0*/
- {S1DREG_CRT_MEM_OFF1, 0x02}, /* CRT/TV Memory Address Offset Register 1*/
- {S1DREG_CRT_PIX_PAN, 0x00}, /* CRT/TV Pixel Panning Register*/
- {S1DREG_CRT_DISP_FIFO_HTC, 0x00}, /* CRT/TV Display FIFO High Threshold Control Register*/
- {S1DREG_CRT_DISP_FIFO_LTC, 0x00}, /* CRT/TV Display FIFO Low Threshold Control Register*/
- {S1DREG_LCD_CUR_CTL, 0x00}, /* LCD Ink/Cursor Control Register*/
- {S1DREG_LCD_CUR_START, 0x01}, /* LCD Ink/Cursor Start Address Register*/
- {S1DREG_LCD_CUR_XPOS0, 0x00}, /* LCD Cursor X Position Register 0*/
- {S1DREG_LCD_CUR_XPOS1, 0x00}, /* LCD Cursor X Position Register 1*/
- {S1DREG_LCD_CUR_YPOS0, 0x00}, /* LCD Cursor Y Position Register 0*/
- {S1DREG_LCD_CUR_YPOS1, 0x00}, /* LCD Cursor Y Position Register 1*/
- {S1DREG_LCD_CUR_BCTL0, 0x00}, /* LCD Ink/Cursor Blue Color 0 Register*/
- {S1DREG_LCD_CUR_GCTL0, 0x00}, /* LCD Ink/Cursor Green Color 0 Register*/
- {S1DREG_LCD_CUR_RCTL0, 0x00}, /* LCD Ink/Cursor Red Color 0 Register*/
- {S1DREG_LCD_CUR_BCTL1, 0x1F}, /* LCD Ink/Cursor Blue Color 1 Register*/
- {S1DREG_LCD_CUR_GCTL1, 0x3F}, /* LCD Ink/Cursor Green Color 1 Register*/
- {S1DREG_LCD_CUR_RCTL1, 0x1F}, /* LCD Ink/Cursor Red Color 1 Register*/
- {S1DREG_LCD_CUR_FIFO_HTC, 0x00}, /* LCD Ink/Cursor FIFO Threshold Register*/
- {S1DREG_CRT_CUR_CTL, 0x00}, /* CRT/TV Ink/Cursor Control Register*/
- {S1DREG_CRT_CUR_START, 0x01}, /* CRT/TV Ink/Cursor Start Address Register*/
- {S1DREG_CRT_CUR_XPOS0, 0x00}, /* CRT/TV Cursor X Position Register 0*/
- {S1DREG_CRT_CUR_XPOS1, 0x00}, /* CRT/TV Cursor X Position Register 1*/
- {S1DREG_CRT_CUR_YPOS0, 0x00}, /* CRT/TV Cursor Y Position Register 0*/
- {S1DREG_CRT_CUR_YPOS1, 0x00}, /* CRT/TV Cursor Y Position Register 1*/
- {S1DREG_CRT_CUR_BCTL0, 0x00}, /* CRT/TV Ink/Cursor Blue Color 0 Register*/
- {S1DREG_CRT_CUR_GCTL0, 0x00}, /* CRT/TV Ink/Cursor Green Color 0 Register*/
- {S1DREG_CRT_CUR_RCTL0, 0x00}, /* CRT/TV Ink/Cursor Red Color 0 Register*/
- {S1DREG_CRT_CUR_BCTL1, 0x1F}, /* CRT/TV Ink/Cursor Blue Color 1 Register*/
- {S1DREG_CRT_CUR_GCTL1, 0x3F}, /* CRT/TV Ink/Cursor Green Color 1 Register*/
- {S1DREG_CRT_CUR_RCTL1, 0x1F}, /* CRT/TV Ink/Cursor Red Color 1 Register*/
- {S1DREG_CRT_CUR_FIFO_HTC, 0x00}, /* CRT/TV Ink/Cursor FIFO Threshold Register*/
- {S1DREG_BBLT_CTL0, 0x00}, /* BitBlt Control Register 0*/
- {S1DREG_BBLT_CTL1, 0x01}, /* BitBlt Control Register 1*/
- {S1DREG_BBLT_CC_EXP, 0x00}, /* BitBlt ROP Code/Color Expansion Register*/
- {S1DREG_BBLT_OP, 0x00}, /* BitBlt Operation Register*/
- {S1DREG_BBLT_SRC_START0, 0x00}, /* BitBlt Source Start Address Register 0*/
- {S1DREG_BBLT_SRC_START1, 0x00}, /* BitBlt Source Start Address Register 1*/
- {S1DREG_BBLT_SRC_START2, 0x00}, /* BitBlt Source Start Address Register 2*/
- {S1DREG_BBLT_DST_START0, 0x00}, /* BitBlt Destination Start Address Register 0*/
- {S1DREG_BBLT_DST_START1, 0x00}, /* BitBlt Destination Start Address Register 1*/
- {S1DREG_BBLT_DST_START2, 0x00}, /* BitBlt Destination Start Address Register 2*/
- {S1DREG_BBLT_MEM_OFF0, 0x00}, /* BitBlt Memory Address Offset Register 0*/
- {S1DREG_BBLT_MEM_OFF1, 0x00}, /* BitBlt Memory Address Offset Register 1*/
- {S1DREG_BBLT_WIDTH0, 0x00}, /* BitBlt Width Register 0*/
- {S1DREG_BBLT_WIDTH1, 0x00}, /* BitBlt Width Register 1*/
- {S1DREG_BBLT_HEIGHT0, 0x00}, /* BitBlt Height Register 0*/
- {S1DREG_BBLT_HEIGHT1, 0x00}, /* BitBlt Height Register 1*/
- {S1DREG_BBLT_BGC0, 0x00}, /* BitBlt Background Color Register 0*/
- {S1DREG_BBLT_BGC1, 0x00}, /* BitBlt Background Color Register 1*/
- {S1DREG_BBLT_FGC0, 0x00}, /* BitBlt Foreground Color Register 0*/
- {S1DREG_BBLT_FGC1, 0x00}, /* BitBlt Foreground Color Register 1*/
- {S1DREG_LKUP_MODE, 0x00}, /* Look-Up Table Mode Register*/
- {S1DREG_LKUP_ADDR, 0x00}, /* Look-Up Table Address Register*/
- {S1DREG_PS_CNF, 0x00}, /* Power Save Configuration Register*/
- {S1DREG_PS_STATUS, 0x00}, /* Power Save Status Register*/
- {S1DREG_CPU2MEM_WDOGT, 0x00}, /* CPU-to-Memory Access Watchdog Timer Register*/
- {S1DREG_COM_DISP_MODE, 0x01}, /* Display Mode Register, LCD only*/
-};
-
-static struct s1d13xxxfb_pdata yl9200_s1dfb_pdata = {
- .initregs = yl9200_s1dfb_initregs,
- .initregssize = ARRAY_SIZE(yl9200_s1dfb_initregs),
- .platform_init_video = yl9200_init_video,
-};
-
-#define YL9200_FB_REG_BASE AT91_CHIPSELECT_7
-#define YL9200_FB_VMEM_BASE YL9200_FB_REG_BASE + SZ_2M
-#define YL9200_FB_VMEM_SIZE SZ_2M
-
-static struct resource yl9200_s1dfb_resource[] = {
- [0] = { /* video mem */
- .name = "s1d13xxxfb memory",
- .start = YL9200_FB_VMEM_BASE,
- .end = YL9200_FB_VMEM_BASE + YL9200_FB_VMEM_SIZE -1,
- .flags = IORESOURCE_MEM,
- },
- [1] = { /* video registers */
- .name = "s1d13xxxfb registers",
- .start = YL9200_FB_REG_BASE,
- .end = YL9200_FB_REG_BASE + SZ_512 -1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static u64 s1dfb_dmamask = DMA_BIT_MASK(32);
-
-static struct platform_device yl9200_s1dfb_device = {
- .name = "s1d13806fb",
- .id = -1,
- .dev = {
- .dma_mask = &s1dfb_dmamask,
- .coherent_dma_mask = DMA_BIT_MASK(32),
- .platform_data = &yl9200_s1dfb_pdata,
- },
- .resource = yl9200_s1dfb_resource,
- .num_resources = ARRAY_SIZE(yl9200_s1dfb_resource),
-};
-
-void __init yl9200_add_device_video(void)
-{
- platform_device_register(&yl9200_s1dfb_device);
-}
-#else
-void __init yl9200_add_device_video(void) {}
-#endif
-
-
-static void __init yl9200_board_init(void)
-{
- /* Serial */
- /* DBGU on ttyS0. (Rx & Tx only) */
- at91_register_uart(0, 0, 0);
-
- /* USART1 on ttyS1. (Rx, Tx, CTS, RTS, DTR, DSR, DCD, RI) */
- at91_register_uart(AT91RM9200_ID_US1, 1, ATMEL_UART_CTS | ATMEL_UART_RTS
- | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- | ATMEL_UART_RI);
-
- /* USART0 on ttyS2. (Rx & Tx only to JP3) */
- at91_register_uart(AT91RM9200_ID_US0, 2, 0);
-
- /* USART3 on ttyS3. (Rx, Tx, RTS - RS485 interface) */
- at91_register_uart(AT91RM9200_ID_US3, 3, ATMEL_UART_RTS);
- at91_add_device_serial();
- /* Ethernet */
- at91_add_device_eth(&yl9200_eth_data);
- /* USB Host */
- at91_add_device_usbh(&yl9200_usbh_data);
- /* USB Device */
- at91_add_device_udc(&yl9200_udc_data);
- /* I2C */
- at91_add_device_i2c(yl9200_i2c_devices, ARRAY_SIZE(yl9200_i2c_devices));
- /* MMC */
- at91_add_device_mci(0, &yl9200_mci0_data);
- /* NAND */
- at91_add_device_nand(&yl9200_nand_data);
- /* NOR Flash */
- platform_device_register(&yl9200_flash);
-#if defined(CONFIG_SPI_ATMEL) || defined(CONFIG_SPI_ATMEL_MODULE)
- /* SPI */
- at91_add_device_spi(yl9200_spi_devices, ARRAY_SIZE(yl9200_spi_devices));
- /* Touchscreen */
- yl9200_add_device_ts();
-#endif
- /* LEDs. */
- at91_gpio_leds(yl9200_leds, ARRAY_SIZE(yl9200_leds));
- /* Push Buttons */
- yl9200_add_device_buttons();
- /* VGA */
- yl9200_add_device_video();
-}
-
-MACHINE_START(YL9200, "uCdragon YL-9200")
- /* Maintainer: S.Birtles */
- .init_time = at91rm9200_timer_init,
- .map_io = at91_map_io,
- .handle_irq = at91_aic_handle_irq,
- .init_early = yl9200_init_early,
- .init_irq = at91_init_irq_default,
- .init_machine = yl9200_board_init,
-MACHINE_END
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/board.h
- *
- * Copyright (C) 2005 HP Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-/*
- * These are data structures found in platform_device.dev.platform_data,
- * and describing board-specific data needed by drivers. For example,
- * which pin is used for a given GPIO role.
- *
- * In 2.6, drivers should strongly avoid board-specific knowledge so
- * that supporting new boards normally won't require driver patches.
- * Most board-specific knowledge should be in arch/.../board-*.c files.
- */
-
-#ifndef __ASM_ARCH_BOARD_H
-#define __ASM_ARCH_BOARD_H
-
-#include <linux/platform_data/atmel.h>
-
- /* USB Device */
-extern void __init at91_add_device_udc(struct at91_udc_data *data);
-
- /* USB High Speed Device */
-extern void __init at91_add_device_usba(struct usba_platform_data *data);
-
- /* Compact Flash */
-extern void __init at91_add_device_cf(struct at91_cf_data *data);
-
- /* MMC / SD */
- /* atmel-mci platform config */
-extern void __init at91_add_device_mci(short mmc_id, struct mci_platform_data *data);
-
-extern void __init at91_add_device_eth(struct macb_platform_data *data);
-
- /* USB Host */
-extern void __init at91_add_device_usbh(struct at91_usbh_data *data);
-extern void __init at91_add_device_usbh_ohci(struct at91_usbh_data *data);
-extern void __init at91_add_device_usbh_ehci(struct at91_usbh_data *data);
-
-extern void __init at91_add_device_nand(struct atmel_nand_data *data);
-
- /* I2C*/
-#if defined(CONFIG_ARCH_AT91SAM9G45)
-extern void __init at91_add_device_i2c(short i2c_id, struct i2c_board_info *devices, int nr_devices);
-#else
-extern void __init at91_add_device_i2c(struct i2c_board_info *devices, int nr_devices);
-#endif
-
- /* SPI */
-extern void __init at91_add_device_spi(struct spi_board_info *devices, int nr_devices);
-
- /* Serial */
-#define ATMEL_UART_CTS 0x01
-#define ATMEL_UART_RTS 0x02
-#define ATMEL_UART_DSR 0x04
-#define ATMEL_UART_DTR 0x08
-#define ATMEL_UART_DCD 0x10
-#define ATMEL_UART_RI 0x20
-
-extern void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins);
-
-extern struct platform_device *atmel_default_console_device;
-
-extern void __init at91_add_device_serial(void);
-
-/*
- * PWM
- */
-#define AT91_PWM0 0
-#define AT91_PWM1 1
-#define AT91_PWM2 2
-#define AT91_PWM3 3
-
-extern void __init at91_add_device_pwm(u32 mask);
-
-/*
- * SSC -- accessed through ssc_request(id). Drivers don't bind to SSC
- * platform devices. Their SSC ID is part of their configuration data,
- * along with information about which SSC signals they should use.
- */
-#define ATMEL_SSC_TK 0x01
-#define ATMEL_SSC_TF 0x02
-#define ATMEL_SSC_TD 0x04
-#define ATMEL_SSC_TX (ATMEL_SSC_TK | ATMEL_SSC_TF | ATMEL_SSC_TD)
-
-#define ATMEL_SSC_RK 0x10
-#define ATMEL_SSC_RF 0x20
-#define ATMEL_SSC_RD 0x40
-#define ATMEL_SSC_RX (ATMEL_SSC_RK | ATMEL_SSC_RF | ATMEL_SSC_RD)
-
-extern void __init at91_add_device_ssc(unsigned id, unsigned pins);
-
- /* LCD Controller */
-struct atmel_lcdfb_pdata;
-extern void __init at91_add_device_lcdc(struct atmel_lcdfb_pdata *data);
-
- /* AC97 */
-extern void __init at91_add_device_ac97(struct ac97c_platform_data *data);
-
- /* ISI */
-struct isi_platform_data;
-extern void __init at91_add_device_isi(struct isi_platform_data *data,
- bool use_pck_as_mck);
-
-/* CAN */
-extern void __init at91_add_device_can(struct at91_can_data *data);
-
- /* LEDs */
-extern void __init at91_gpio_leds(struct gpio_led *leds, int nr);
-
-#endif
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/clock.c
- *
- * Copyright (C) 2005 David Brownell
- * Copyright (C) 2005 Ivan Kokshaysky
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/fs.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/list.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/spinlock.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/of_address.h>
-#include <linux/clk/at91_pmc.h>
-
-#include <mach/hardware.h>
-#include <mach/cpu.h>
-
-#include <asm/proc-fns.h>
-
-#include "clock.h"
-#include "generic.h"
-
-void __iomem *at91_pmc_base;
-EXPORT_SYMBOL_GPL(at91_pmc_base);
-
-/*
- * There's a lot more which can be done with clocks, including cpufreq
- * integration, slow clock mode support (for system suspend), letting
- * PLLB be used at other rates (on boards that don't need USB), etc.
- */
-
-#define clk_is_primary(x) ((x)->type & CLK_TYPE_PRIMARY)
-#define clk_is_programmable(x) ((x)->type & CLK_TYPE_PROGRAMMABLE)
-#define clk_is_peripheral(x) ((x)->type & CLK_TYPE_PERIPHERAL)
-#define clk_is_sys(x) ((x)->type & CLK_TYPE_SYSTEM)
-
-
-/*
- * Chips have some kind of clocks : group them by functionality
- */
-#define cpu_has_utmi() ( cpu_is_at91sam9rl() \
- || cpu_is_at91sam9g45() \
- || cpu_is_at91sam9x5() \
- || cpu_is_sama5d3())
-
-#define cpu_has_1056M_plla() (cpu_is_sama5d3())
-
-#define cpu_has_800M_plla() ( cpu_is_at91sam9g20() \
- || cpu_is_at91sam9g45() \
- || cpu_is_at91sam9x5() \
- || cpu_is_at91sam9n12())
-
-#define cpu_has_300M_plla() (cpu_is_at91sam9g10())
-
-#define cpu_has_240M_plla() (cpu_is_at91sam9261() \
- || cpu_is_at91sam9263() \
- || cpu_is_at91sam9rl())
-
-#define cpu_has_210M_plla() (cpu_is_at91sam9260())
-
-#define cpu_has_pllb() (!(cpu_is_at91sam9rl() \
- || cpu_is_at91sam9g45() \
- || cpu_is_at91sam9x5() \
- || cpu_is_sama5d3()))
-
-#define cpu_has_upll() (cpu_is_at91sam9g45() \
- || cpu_is_at91sam9x5() \
- || cpu_is_sama5d3())
-
-/* USB host HS & FS */
-#define cpu_has_uhp() (!cpu_is_at91sam9rl())
-
-/* USB device FS only */
-#define cpu_has_udpfs() (!(cpu_is_at91sam9rl() \
- || cpu_is_at91sam9g45() \
- || cpu_is_at91sam9x5() \
- || cpu_is_sama5d3()))
-
-#define cpu_has_plladiv2() (cpu_is_at91sam9g45() \
- || cpu_is_at91sam9x5() \
- || cpu_is_at91sam9n12() \
- || cpu_is_sama5d3())
-
-#define cpu_has_mdiv3() (cpu_is_at91sam9g45() \
- || cpu_is_at91sam9x5() \
- || cpu_is_at91sam9n12() \
- || cpu_is_sama5d3())
-
-#define cpu_has_alt_prescaler() (cpu_is_at91sam9x5() \
- || cpu_is_at91sam9n12() \
- || cpu_is_sama5d3())
-
-static LIST_HEAD(clocks);
-static DEFINE_SPINLOCK(clk_lock);
-
-static u32 at91_pllb_usb_init;
-
-/*
- * Four primary clock sources: two crystal oscillators (32K, main), and
- * two PLLs. PLLA usually runs the master clock; and PLLB must run at
- * 48 MHz (unless no USB function clocks are needed). The main clock and
- * both PLLs are turned off to run in "slow clock mode" (system suspend).
- */
-static struct clk clk32k = {
- .name = "clk32k",
- .rate_hz = AT91_SLOW_CLOCK,
- .users = 1, /* always on */
- .id = 0,
- .type = CLK_TYPE_PRIMARY,
-};
-static struct clk main_clk = {
- .name = "main",
- .pmc_mask = AT91_PMC_MOSCS, /* in PMC_SR */
- .id = 1,
- .type = CLK_TYPE_PRIMARY,
-};
-static struct clk plla = {
- .name = "plla",
- .parent = &main_clk,
- .pmc_mask = AT91_PMC_LOCKA, /* in PMC_SR */
- .id = 2,
- .type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL,
-};
-
-static void pllb_mode(struct clk *clk, int is_on)
-{
- u32 value;
-
- if (is_on) {
- is_on = AT91_PMC_LOCKB;
- value = at91_pllb_usb_init;
- } else
- value = 0;
-
- // REVISIT: Add work-around for AT91RM9200 Errata #26 ?
- at91_pmc_write(AT91_CKGR_PLLBR, value);
-
- do {
- cpu_relax();
- } while ((at91_pmc_read(AT91_PMC_SR) & AT91_PMC_LOCKB) != is_on);
-}
-
-static struct clk pllb = {
- .name = "pllb",
- .parent = &main_clk,
- .pmc_mask = AT91_PMC_LOCKB, /* in PMC_SR */
- .mode = pllb_mode,
- .id = 3,
- .type = CLK_TYPE_PRIMARY | CLK_TYPE_PLL,
-};
-
-static void pmc_sys_mode(struct clk *clk, int is_on)
-{
- if (is_on)
- at91_pmc_write(AT91_PMC_SCER, clk->pmc_mask);
- else
- at91_pmc_write(AT91_PMC_SCDR, clk->pmc_mask);
-}
-
-static void pmc_uckr_mode(struct clk *clk, int is_on)
-{
- unsigned int uckr = at91_pmc_read(AT91_CKGR_UCKR);
-
- if (is_on) {
- is_on = AT91_PMC_LOCKU;
- at91_pmc_write(AT91_CKGR_UCKR, uckr | clk->pmc_mask);
- } else
- at91_pmc_write(AT91_CKGR_UCKR, uckr & ~(clk->pmc_mask));
-
- do {
- cpu_relax();
- } while ((at91_pmc_read(AT91_PMC_SR) & AT91_PMC_LOCKU) != is_on);
-}
-
-/* USB function clocks (PLLB must be 48 MHz) */
-static struct clk udpck = {
- .name = "udpck",
- .parent = &pllb,
- .mode = pmc_sys_mode,
-};
-struct clk utmi_clk = {
- .name = "utmi_clk",
- .parent = &main_clk,
- .pmc_mask = AT91_PMC_UPLLEN, /* in CKGR_UCKR */
- .mode = pmc_uckr_mode,
- .type = CLK_TYPE_PLL,
-};
-static struct clk uhpck = {
- .name = "uhpck",
- /*.parent = ... we choose parent at runtime */
- .mode = pmc_sys_mode,
-};
-
-
-/*
- * The master clock is divided from the CPU clock (by 1-4). It's used for
- * memory, interfaces to on-chip peripherals, the AIC, and sometimes more
- * (e.g baud rate generation). It's sourced from one of the primary clocks.
- */
-struct clk mck = {
- .name = "mck",
- .pmc_mask = AT91_PMC_MCKRDY, /* in PMC_SR */
-};
-
-static void pmc_periph_mode(struct clk *clk, int is_on)
-{
- u32 regval = 0;
-
- /*
- * With sama5d3 devices, we are managing clock division so we have to
- * use the Peripheral Control Register introduced from at91sam9x5
- * devices.
- */
- if (cpu_is_sama5d3()) {
- regval |= AT91_PMC_PCR_CMD; /* write command */
- regval |= clk->pid & AT91_PMC_PCR_PID; /* peripheral selection */
- regval |= AT91_PMC_PCR_DIV(clk->div);
- if (is_on)
- regval |= AT91_PMC_PCR_EN; /* enable clock */
- at91_pmc_write(AT91_PMC_PCR, regval);
- } else {
- if (is_on)
- at91_pmc_write(AT91_PMC_PCER, clk->pmc_mask);
- else
- at91_pmc_write(AT91_PMC_PCDR, clk->pmc_mask);
- }
-}
-
-static struct clk __init *at91_css_to_clk(unsigned long css)
-{
- switch (css) {
- case AT91_PMC_CSS_SLOW:
- return &clk32k;
- case AT91_PMC_CSS_MAIN:
- return &main_clk;
- case AT91_PMC_CSS_PLLA:
- return &plla;
- case AT91_PMC_CSS_PLLB:
- if (cpu_has_upll())
- /* CSS_PLLB == CSS_UPLL */
- return &utmi_clk;
- else if (cpu_has_pllb())
- return &pllb;
- break;
- /* alternate PMC: can use master clock */
- case AT91_PMC_CSS_MASTER:
- return &mck;
- }
-
- return NULL;
-}
-
-static int pmc_prescaler_divider(u32 reg)
-{
- if (cpu_has_alt_prescaler()) {
- return 1 << ((reg & AT91_PMC_ALT_PRES) >> PMC_ALT_PRES_OFFSET);
- } else {
- return 1 << ((reg & AT91_PMC_PRES) >> PMC_PRES_OFFSET);
- }
-}
-
-static void __clk_enable(struct clk *clk)
-{
- if (clk->parent)
- __clk_enable(clk->parent);
- if (clk->users++ == 0 && clk->mode)
- clk->mode(clk, 1);
-}
-
-int clk_enable(struct clk *clk)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&clk_lock, flags);
- __clk_enable(clk);
- spin_unlock_irqrestore(&clk_lock, flags);
- return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-static void __clk_disable(struct clk *clk)
-{
- BUG_ON(clk->users == 0);
- if (--clk->users == 0 && clk->mode)
- clk->mode(clk, 0);
- if (clk->parent)
- __clk_disable(clk->parent);
-}
-
-void clk_disable(struct clk *clk)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&clk_lock, flags);
- __clk_disable(clk);
- spin_unlock_irqrestore(&clk_lock, flags);
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
- unsigned long flags;
- unsigned long rate;
-
- spin_lock_irqsave(&clk_lock, flags);
- for (;;) {
- rate = clk->rate_hz;
- if (rate || !clk->parent)
- break;
- clk = clk->parent;
- }
- spin_unlock_irqrestore(&clk_lock, flags);
- return rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-/*------------------------------------------------------------------------*/
-
-/*
- * For now, only the programmable clocks support reparenting (MCK could
- * do this too, with care) or rate changing (the PLLs could do this too,
- * ditto MCK but that's more for cpufreq). Drivers may reparent to get
- * a better rate match; we don't.
- */
-
-long clk_round_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long flags;
- unsigned prescale;
- unsigned long actual;
- unsigned long prev = ULONG_MAX;
-
- if (!clk_is_programmable(clk))
- return -EINVAL;
- spin_lock_irqsave(&clk_lock, flags);
-
- actual = clk->parent->rate_hz;
- for (prescale = 0; prescale < 7; prescale++) {
- if (actual > rate)
- prev = actual;
-
- if (actual && actual <= rate) {
- if ((prev - rate) < (rate - actual)) {
- actual = prev;
- prescale--;
- }
- break;
- }
- actual >>= 1;
- }
-
- spin_unlock_irqrestore(&clk_lock, flags);
- return (prescale < 7) ? actual : -ENOENT;
-}
-EXPORT_SYMBOL(clk_round_rate);
-
-int clk_set_rate(struct clk *clk, unsigned long rate)
-{
- unsigned long flags;
- unsigned prescale;
- unsigned long prescale_offset, css_mask;
- unsigned long actual;
-
- if (!clk_is_programmable(clk))
- return -EINVAL;
- if (clk->users)
- return -EBUSY;
-
- if (cpu_has_alt_prescaler()) {
- prescale_offset = PMC_ALT_PRES_OFFSET;
- css_mask = AT91_PMC_ALT_PCKR_CSS;
- } else {
- prescale_offset = PMC_PRES_OFFSET;
- css_mask = AT91_PMC_CSS;
- }
-
- spin_lock_irqsave(&clk_lock, flags);
-
- actual = clk->parent->rate_hz;
- for (prescale = 0; prescale < 7; prescale++) {
- if (actual && actual <= rate) {
- u32 pckr;
-
- pckr = at91_pmc_read(AT91_PMC_PCKR(clk->id));
- pckr &= css_mask; /* keep clock selection */
- pckr |= prescale << prescale_offset;
- at91_pmc_write(AT91_PMC_PCKR(clk->id), pckr);
- clk->rate_hz = actual;
- break;
- }
- actual >>= 1;
- }
-
- spin_unlock_irqrestore(&clk_lock, flags);
- return (prescale < 7) ? actual : -ENOENT;
-}
-EXPORT_SYMBOL(clk_set_rate);
-
-struct clk *clk_get_parent(struct clk *clk)
-{
- return clk->parent;
-}
-EXPORT_SYMBOL(clk_get_parent);
-
-int clk_set_parent(struct clk *clk, struct clk *parent)
-{
- unsigned long flags;
-
- if (clk->users)
- return -EBUSY;
- if (!clk_is_primary(parent) || !clk_is_programmable(clk))
- return -EINVAL;
-
- if (cpu_is_at91sam9rl() && parent->id == AT91_PMC_CSS_PLLB)
- return -EINVAL;
-
- spin_lock_irqsave(&clk_lock, flags);
-
- clk->rate_hz = parent->rate_hz;
- clk->parent = parent;
- at91_pmc_write(AT91_PMC_PCKR(clk->id), parent->id);
-
- spin_unlock_irqrestore(&clk_lock, flags);
- return 0;
-}
-EXPORT_SYMBOL(clk_set_parent);
-
-/* establish PCK0..PCKN parentage and rate */
-static void __init init_programmable_clock(struct clk *clk)
-{
- struct clk *parent;
- u32 pckr;
- unsigned int css_mask;
-
- if (cpu_has_alt_prescaler())
- css_mask = AT91_PMC_ALT_PCKR_CSS;
- else
- css_mask = AT91_PMC_CSS;
-
- pckr = at91_pmc_read(AT91_PMC_PCKR(clk->id));
- parent = at91_css_to_clk(pckr & css_mask);
- clk->parent = parent;
- clk->rate_hz = parent->rate_hz / pmc_prescaler_divider(pckr);
-}
-
-/*------------------------------------------------------------------------*/
-
-#ifdef CONFIG_DEBUG_FS
-
-static int at91_clk_show(struct seq_file *s, void *unused)
-{
- u32 scsr, pcsr, pcsr1 = 0, uckr = 0, sr;
- struct clk *clk;
-
- scsr = at91_pmc_read(AT91_PMC_SCSR);
- pcsr = at91_pmc_read(AT91_PMC_PCSR);
- if (cpu_is_sama5d3())
- pcsr1 = at91_pmc_read(AT91_PMC_PCSR1);
- sr = at91_pmc_read(AT91_PMC_SR);
- seq_printf(s, "SCSR = %8x\n", scsr);
- seq_printf(s, "PCSR = %8x\n", pcsr);
- if (cpu_is_sama5d3())
- seq_printf(s, "PCSR1 = %8x\n", pcsr1);
- seq_printf(s, "MOR = %8x\n", at91_pmc_read(AT91_CKGR_MOR));
- seq_printf(s, "MCFR = %8x\n", at91_pmc_read(AT91_CKGR_MCFR));
- seq_printf(s, "PLLA = %8x\n", at91_pmc_read(AT91_CKGR_PLLAR));
- if (cpu_has_pllb())
- seq_printf(s, "PLLB = %8x\n", at91_pmc_read(AT91_CKGR_PLLBR));
- if (cpu_has_utmi()) {
- uckr = at91_pmc_read(AT91_CKGR_UCKR);
- seq_printf(s, "UCKR = %8x\n", uckr);
- }
- seq_printf(s, "MCKR = %8x\n", at91_pmc_read(AT91_PMC_MCKR));
- if (cpu_has_upll() || cpu_is_at91sam9n12())
- seq_printf(s, "USB = %8x\n", at91_pmc_read(AT91_PMC_USB));
- seq_printf(s, "SR = %8x\n", sr);
-
- seq_printf(s, "\n");
-
- list_for_each_entry(clk, &clocks, node) {
- char *state;
-
- if (clk->mode == pmc_sys_mode) {
- state = (scsr & clk->pmc_mask) ? "on" : "off";
- } else if (clk->mode == pmc_periph_mode) {
- if (cpu_is_sama5d3()) {
- u32 pmc_mask = 1 << (clk->pid % 32);
-
- if (clk->pid > 31)
- state = (pcsr1 & pmc_mask) ? "on" : "off";
- else
- state = (pcsr & pmc_mask) ? "on" : "off";
- } else {
- state = (pcsr & clk->pmc_mask) ? "on" : "off";
- }
- } else if (clk->mode == pmc_uckr_mode) {
- state = (uckr & clk->pmc_mask) ? "on" : "off";
- } else if (clk->pmc_mask) {
- state = (sr & clk->pmc_mask) ? "on" : "off";
- } else if (clk == &clk32k || clk == &main_clk) {
- state = "on";
- } else {
- state = "";
- }
-
- seq_printf(s, "%-10s users=%2d %-3s %9lu Hz %s\n",
- clk->name, clk->users, state, clk_get_rate(clk),
- clk->parent ? clk->parent->name : "");
- }
- return 0;
-}
-
-static int at91_clk_open(struct inode *inode, struct file *file)
-{
- return single_open(file, at91_clk_show, NULL);
-}
-
-static const struct file_operations at91_clk_operations = {
- .open = at91_clk_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int __init at91_clk_debugfs_init(void)
-{
- /* /sys/kernel/debug/at91_clk */
- (void) debugfs_create_file("at91_clk", S_IFREG | S_IRUGO, NULL, NULL, &at91_clk_operations);
-
- return 0;
-}
-postcore_initcall(at91_clk_debugfs_init);
-
-#endif
-
-/*------------------------------------------------------------------------*/
-
-/* Register a new clock */
-static void __init at91_clk_add(struct clk *clk)
-{
- list_add_tail(&clk->node, &clocks);
-
- clk->cl.con_id = clk->name;
- clk->cl.clk = clk;
- clkdev_add(&clk->cl);
-}
-
-int __init clk_register(struct clk *clk)
-{
- if (clk_is_peripheral(clk)) {
- if (!clk->parent)
- clk->parent = &mck;
- if (cpu_is_sama5d3())
- clk->rate_hz = DIV_ROUND_UP(clk->parent->rate_hz,
- 1 << clk->div);
- clk->mode = pmc_periph_mode;
- }
- else if (clk_is_sys(clk)) {
- clk->parent = &mck;
- clk->mode = pmc_sys_mode;
- }
- else if (clk_is_programmable(clk)) {
- clk->mode = pmc_sys_mode;
- init_programmable_clock(clk);
- }
-
- at91_clk_add(clk);
-
- return 0;
-}
-
-/*------------------------------------------------------------------------*/
-
-static u32 __init at91_pll_rate(struct clk *pll, u32 freq, u32 reg)
-{
- unsigned mul, div;
-
- div = reg & 0xff;
- if (cpu_is_sama5d3())
- mul = AT91_PMC3_MUL_GET(reg);
- else
- mul = AT91_PMC_MUL_GET(reg);
-
- if (div && mul) {
- freq /= div;
- freq *= mul + 1;
- } else
- freq = 0;
-
- return freq;
-}
-
-static u32 __init at91_usb_rate(struct clk *pll, u32 freq, u32 reg)
-{
- if (pll == &pllb && (reg & AT91_PMC_USB96M))
- return freq / 2;
- else if (pll == &utmi_clk || cpu_is_at91sam9n12())
- return freq / (1 + ((reg & AT91_PMC_OHCIUSBDIV) >> 8));
- else
- return freq;
-}
-
-static unsigned __init at91_pll_calc(unsigned main_freq, unsigned out_freq)
-{
- unsigned i, div = 0, mul = 0, diff = 1 << 30;
- unsigned ret = (out_freq > 155000000) ? 0xbe00 : 0x3e00;
-
- /* PLL output max 240 MHz (or 180 MHz per errata) */
- if (out_freq > 240000000)
- goto fail;
-
- for (i = 1; i < 256; i++) {
- int diff1;
- unsigned input, mul1;
-
- /*
- * PLL input between 1MHz and 32MHz per spec, but lower
- * frequences seem necessary in some cases so allow 100K.
- * Warning: some newer products need 2MHz min.
- */
- input = main_freq / i;
- if (cpu_is_at91sam9g20() && input < 2000000)
- continue;
- if (input < 100000)
- continue;
- if (input > 32000000)
- continue;
-
- mul1 = out_freq / input;
- if (cpu_is_at91sam9g20() && mul > 63)
- continue;
- if (mul1 > 2048)
- continue;
- if (mul1 < 2)
- goto fail;
-
- diff1 = out_freq - input * mul1;
- if (diff1 < 0)
- diff1 = -diff1;
- if (diff > diff1) {
- diff = diff1;
- div = i;
- mul = mul1;
- if (diff == 0)
- break;
- }
- }
- if (i == 256 && diff > (out_freq >> 5))
- goto fail;
- return ret | ((mul - 1) << 16) | div;
-fail:
- return 0;
-}
-
-static struct clk *const standard_pmc_clocks[] __initconst = {
- /* four primary clocks */
- &clk32k,
- &main_clk,
- &plla,
-
- /* MCK */
- &mck
-};
-
-/* PLLB generated USB full speed clock init */
-static void __init at91_pllb_usbfs_clock_init(unsigned long main_clock)
-{
- unsigned int reg;
-
- /*
- * USB clock init: choose 48 MHz PLLB value,
- * disable 48MHz clock during usb peripheral suspend.
- *
- * REVISIT: assumes MCK doesn't derive from PLLB!
- */
- uhpck.parent = &pllb;
-
- reg = at91_pllb_usb_init = at91_pll_calc(main_clock, 48000000 * 2);
- pllb.rate_hz = at91_pll_rate(&pllb, main_clock, at91_pllb_usb_init);
- if (cpu_is_at91rm9200()) {
- reg = at91_pllb_usb_init |= AT91_PMC_USB96M;
- uhpck.pmc_mask = AT91RM9200_PMC_UHP;
- udpck.pmc_mask = AT91RM9200_PMC_UDP;
- at91_pmc_write(AT91_PMC_SCER, AT91RM9200_PMC_MCKUDP);
- } else if (cpu_is_at91sam9260() || cpu_is_at91sam9261() ||
- cpu_is_at91sam9263() || cpu_is_at91sam9g20() ||
- cpu_is_at91sam9g10()) {
- reg = at91_pllb_usb_init |= AT91_PMC_USB96M;
- uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
- udpck.pmc_mask = AT91SAM926x_PMC_UDP;
- } else if (cpu_is_at91sam9n12()) {
- /* Divider for USB clock is in USB clock register for 9n12 */
- reg = AT91_PMC_USBS_PLLB;
-
- /* For PLLB output 96M, set usb divider 2 (USBDIV + 1) */
- reg |= AT91_PMC_OHCIUSBDIV_2;
- at91_pmc_write(AT91_PMC_USB, reg);
-
- /* Still setup masks */
- uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
- udpck.pmc_mask = AT91SAM926x_PMC_UDP;
- }
- at91_pmc_write(AT91_CKGR_PLLBR, 0);
-
- udpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, reg);
- uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, reg);
-}
-
-/* UPLL generated USB full speed clock init */
-static void __init at91_upll_usbfs_clock_init(unsigned long main_clock)
-{
- /*
- * USB clock init: choose 480 MHz from UPLL,
- */
- unsigned int usbr = AT91_PMC_USBS_UPLL;
-
- /* Setup divider by 10 to reach 48 MHz */
- usbr |= ((10 - 1) << 8) & AT91_PMC_OHCIUSBDIV;
-
- at91_pmc_write(AT91_PMC_USB, usbr);
-
- /* Now set uhpck values */
- uhpck.parent = &utmi_clk;
- uhpck.pmc_mask = AT91SAM926x_PMC_UHP;
- uhpck.rate_hz = at91_usb_rate(&utmi_clk, utmi_clk.rate_hz, usbr);
-}
-
-static int __init at91_pmc_init(unsigned long main_clock)
-{
- unsigned tmp, freq, mckr;
- int i;
- int pll_overclock = false;
-
- /*
- * When the bootloader initialized the main oscillator correctly,
- * there's no problem using the cycle counter. But if it didn't,
- * or when using oscillator bypass mode, we must be told the speed
- * of the main clock.
- */
- if (!main_clock) {
- do {
- tmp = at91_pmc_read(AT91_CKGR_MCFR);
- } while (!(tmp & AT91_PMC_MAINRDY));
- main_clock = (tmp & AT91_PMC_MAINF) * (AT91_SLOW_CLOCK / 16);
- }
- main_clk.rate_hz = main_clock;
-
- /* report if PLLA is more than mildly overclocked */
- plla.rate_hz = at91_pll_rate(&plla, main_clock, at91_pmc_read(AT91_CKGR_PLLAR));
- if (cpu_has_1056M_plla()) {
- if (plla.rate_hz > 1056000000)
- pll_overclock = true;
- } else if (cpu_has_800M_plla()) {
- if (plla.rate_hz > 800000000)
- pll_overclock = true;
- } else if (cpu_has_300M_plla()) {
- if (plla.rate_hz > 300000000)
- pll_overclock = true;
- } else if (cpu_has_240M_plla()) {
- if (plla.rate_hz > 240000000)
- pll_overclock = true;
- } else if (cpu_has_210M_plla()) {
- if (plla.rate_hz > 210000000)
- pll_overclock = true;
- } else {
- if (plla.rate_hz > 209000000)
- pll_overclock = true;
- }
- if (pll_overclock)
- pr_info("Clocks: PLLA overclocked, %ld MHz\n", plla.rate_hz / 1000000);
-
- if (cpu_has_plladiv2()) {
- mckr = at91_pmc_read(AT91_PMC_MCKR);
- plla.rate_hz /= (1 << ((mckr & AT91_PMC_PLLADIV2) >> 12)); /* plla divisor by 2 */
- }
-
- if (!cpu_has_pllb() && cpu_has_upll()) {
- /* setup UTMI clock as the fourth primary clock
- * (instead of pllb) */
- utmi_clk.type |= CLK_TYPE_PRIMARY;
- utmi_clk.id = 3;
- }
-
-
- /*
- * USB HS clock init
- */
- if (cpu_has_utmi()) {
- /*
- * multiplier is hard-wired to 40
- * (obtain the USB High Speed 480 MHz when input is 12 MHz)
- */
- utmi_clk.rate_hz = 40 * utmi_clk.parent->rate_hz;
-
- /* UTMI bias and PLL are managed at the same time */
- if (cpu_has_upll())
- utmi_clk.pmc_mask |= AT91_PMC_BIASEN;
- }
-
- /*
- * USB FS clock init
- */
- if (cpu_has_pllb())
- at91_pllb_usbfs_clock_init(main_clock);
- if (cpu_has_upll())
- /* assumes that we choose UPLL for USB and not PLLA */
- at91_upll_usbfs_clock_init(main_clock);
-
- /*
- * MCK and CPU derive from one of those primary clocks.
- * For now, assume this parentage won't change.
- */
- mckr = at91_pmc_read(AT91_PMC_MCKR);
- mck.parent = at91_css_to_clk(mckr & AT91_PMC_CSS);
- freq = mck.parent->rate_hz;
- freq /= pmc_prescaler_divider(mckr); /* prescale */
- if (cpu_is_at91rm9200()) {
- mck.rate_hz = freq / (1 + ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
- } else if (cpu_is_at91sam9g20()) {
- mck.rate_hz = (mckr & AT91_PMC_MDIV) ?
- freq / ((mckr & AT91_PMC_MDIV) >> 7) : freq; /* mdiv ; (x >> 7) = ((x >> 8) * 2) */
- if (mckr & AT91_PMC_PDIV)
- freq /= 2; /* processor clock division */
- } else if (cpu_has_mdiv3()) {
- mck.rate_hz = (mckr & AT91_PMC_MDIV) == AT91SAM9_PMC_MDIV_3 ?
- freq / 3 : freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
- } else {
- mck.rate_hz = freq / (1 << ((mckr & AT91_PMC_MDIV) >> 8)); /* mdiv */
- }
-
- if (cpu_has_alt_prescaler()) {
- /* Programmable clocks can use MCK */
- mck.type |= CLK_TYPE_PRIMARY;
- mck.id = 4;
- }
-
- /* Register the PMC's standard clocks */
- for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++)
- at91_clk_add(standard_pmc_clocks[i]);
-
- if (cpu_has_pllb())
- at91_clk_add(&pllb);
-
- if (cpu_has_uhp())
- at91_clk_add(&uhpck);
-
- if (cpu_has_udpfs())
- at91_clk_add(&udpck);
-
- if (cpu_has_utmi())
- at91_clk_add(&utmi_clk);
-
- /* MCK and CPU clock are "always on" */
- clk_enable(&mck);
-
- printk("Clocks: CPU %u MHz, master %u MHz, main %u.%03u MHz\n",
- freq / 1000000, (unsigned) mck.rate_hz / 1000000,
- (unsigned) main_clock / 1000000,
- ((unsigned) main_clock % 1000000) / 1000);
-
- return 0;
-}
-
-#if defined(CONFIG_OF)
-static struct of_device_id pmc_ids[] = {
- { .compatible = "atmel,at91rm9200-pmc" },
- { .compatible = "atmel,at91sam9260-pmc" },
- { .compatible = "atmel,at91sam9g45-pmc" },
- { .compatible = "atmel,at91sam9n12-pmc" },
- { .compatible = "atmel,at91sam9x5-pmc" },
- { .compatible = "atmel,sama5d3-pmc" },
- { /*sentinel*/ }
-};
-
-static struct of_device_id osc_ids[] = {
- { .compatible = "atmel,osc" },
- { /*sentinel*/ }
-};
-
-int __init at91_dt_clock_init(void)
-{
- struct device_node *np;
- u32 main_clock = 0;
-
- np = of_find_matching_node(NULL, pmc_ids);
- if (!np)
- panic("unable to find compatible pmc node in dtb\n");
-
- at91_pmc_base = of_iomap(np, 0);
- if (!at91_pmc_base)
- panic("unable to map pmc cpu registers\n");
-
- of_node_put(np);
-
- /* retrieve the freqency of fixed clocks from device tree */
- np = of_find_matching_node(NULL, osc_ids);
- if (np) {
- u32 rate;
- if (!of_property_read_u32(np, "clock-frequency", &rate))
- main_clock = rate;
- }
-
- of_node_put(np);
-
- return at91_pmc_init(main_clock);
-}
-#endif
-
-int __init at91_clock_init(unsigned long main_clock)
-{
- at91_pmc_base = ioremap(AT91_PMC, 256);
- if (!at91_pmc_base)
- panic("Impossible to ioremap AT91_PMC 0x%x\n", AT91_PMC);
-
- return at91_pmc_init(main_clock);
-}
-
-/*
- * Several unused clocks may be active. Turn them off.
- */
-static int __init at91_clock_reset(void)
-{
- unsigned long pcdr = 0;
- unsigned long pcdr1 = 0;
- unsigned long scdr = 0;
- struct clk *clk;
-
- list_for_each_entry(clk, &clocks, node) {
- if (clk->users > 0)
- continue;
-
- if (clk->mode == pmc_periph_mode) {
- if (cpu_is_sama5d3()) {
- u32 pmc_mask = 1 << (clk->pid % 32);
-
- if (clk->pid > 31)
- pcdr1 |= pmc_mask;
- else
- pcdr |= pmc_mask;
- } else
- pcdr |= clk->pmc_mask;
- }
-
- if (clk->mode == pmc_sys_mode)
- scdr |= clk->pmc_mask;
-
- pr_debug("Clocks: disable unused %s\n", clk->name);
- }
-
- at91_pmc_write(AT91_PMC_SCDR, scdr);
- at91_pmc_write(AT91_PMC_PCDR, pcdr);
- if (cpu_is_sama5d3())
- at91_pmc_write(AT91_PMC_PCDR1, pcdr1);
-
- return 0;
-}
-late_initcall(at91_clock_reset);
-
-void at91sam9_idle(void)
-{
- at91_pmc_write(AT91_PMC_SCDR, AT91_PMC_PCK);
- cpu_do_idle();
-}
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/clock.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/clkdev.h>
-
-#define CLK_TYPE_PRIMARY 0x1
-#define CLK_TYPE_PLL 0x2
-#define CLK_TYPE_PROGRAMMABLE 0x4
-#define CLK_TYPE_PERIPHERAL 0x8
-#define CLK_TYPE_SYSTEM 0x10
-
-
-struct clk {
- struct list_head node;
- const char *name; /* unique clock name */
- struct clk_lookup cl;
- unsigned long rate_hz;
- unsigned div; /* parent clock divider */
- struct clk *parent;
- unsigned pid; /* peripheral ID */
- u32 pmc_mask;
- void (*mode)(struct clk *, int);
- unsigned id:3; /* PCK0..4, or 32k/main/a/b */
- unsigned type; /* clock type */
- u16 users;
-};
-
-
-extern int __init clk_register(struct clk *clk);
-extern struct clk mck;
-extern struct clk utmi_clk;
-
-#define CLKDEV_CON_ID(_id, _clk) \
- { \
- .con_id = _id, \
- .clk = _clk, \
- }
-
-#define CLKDEV_CON_DEV_ID(_con_id, _dev_id, _clk) \
- { \
- .con_id = _con_id, \
- .dev_id = _dev_id, \
- .clk = _clk, \
- }
#ifndef _AT91_GENERIC_H
#define _AT91_GENERIC_H
-#include <linux/clkdev.h>
#include <linux/of.h>
#include <linux/reboot.h>
/* Processors */
extern void __init at91rm9200_set_type(int type);
-extern void __init at91_initialize(unsigned long main_clock);
-extern void __init at91x40_initialize(unsigned long main_clock);
extern void __init at91rm9200_dt_initialize(void);
extern void __init at91_dt_initialize(void);
/* Interrupts */
-extern void __init at91_init_irq_default(void);
-extern void __init at91_init_interrupts(unsigned int priority[]);
-extern void __init at91x40_init_interrupts(unsigned int priority[]);
-extern void __init at91_aic_init(unsigned int priority[],
- unsigned int ext_irq_mask);
-extern int __init at91_aic_of_init(struct device_node *node,
- struct device_node *parent);
-extern int __init at91_aic5_of_init(struct device_node *node,
- struct device_node *parent);
extern void __init at91_sysirq_mask_rtc(u32 rtc_base);
extern void __init at91_sysirq_mask_rtt(u32 rtt_base);
- /* Devices */
-extern void __init at91_register_devices(void);
-
/* Timer */
-extern void __init at91_init_time(void);
-extern void at91rm9200_ioremap_st(u32 addr);
extern void at91rm9200_timer_init(void);
-extern void at91sam926x_ioremap_pit(u32 addr);
-extern void at91sam926x_pit_init(int irq);
-extern void at91x40_timer_init(void);
-
- /* Clocks */
-#ifdef CONFIG_OLD_CLK_AT91
-extern int __init at91_clock_init(unsigned long main_clock);
-extern int __init at91_dt_clock_init(void);
-#else
-static int inline at91_clock_init(unsigned long main_clock) { return 0; }
-static int inline at91_dt_clock_init(void) { return 0; }
-#endif
-struct device;
-
- /* Power Management */
-extern void at91_irq_suspend(void);
-extern void at91_irq_resume(void);
/* idle */
extern void at91sam9_idle(void);
/* Matrix */
extern void at91_ioremap_matrix(u32 base_addr);
-
-/* Ram Controler */
-extern void at91_ioremap_ramc(int id, u32 addr, u32 size);
-
- /* GPIO */
-#define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */
-#define AT91RM9200_BGA 4 /* AT91RM9200 BGA package has 4 banks */
-
-struct at91_gpio_bank {
- unsigned short id; /* peripheral ID */
- unsigned long regbase; /* offset from system peripheral base */
-};
-extern void __init at91_gpio_init(struct at91_gpio_bank *, int nr_banks);
-extern void __init at91_gpio_irq_setup(void);
-extern int __init at91_gpio_of_irq_setup(struct device_node *node,
- struct device_node *parent);
-
-extern u32 at91_get_extern_irq(void);
-
#endif /* _AT91_GENERIC_H */
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/gpio.c
- *
- * Copyright (C) 2005 HP Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/clk.h>
-#include <linux/errno.h>
-#include <linux/device.h>
-#include <linux/gpio.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/irqdomain.h>
-#include <linux/irqchip/chained_irq.h>
-#include <linux/of_address.h>
-
-#include <mach/hardware.h>
-#include <mach/at91_pio.h>
-
-#include "generic.h"
-#include "gpio.h"
-
-#define MAX_NB_GPIO_PER_BANK 32
-
-struct at91_gpio_chip {
- struct gpio_chip chip;
- struct at91_gpio_chip *next; /* Bank sharing same clock */
- int pioc_hwirq; /* PIO bank interrupt identifier on AIC */
- int pioc_virq; /* PIO bank Linux virtual interrupt */
- int pioc_idx; /* PIO bank index */
- void __iomem *regbase; /* PIO bank virtual address */
- struct clk *clock; /* associated clock */
- struct irq_domain *domain; /* associated irq domain */
-};
-
-#define to_at91_gpio_chip(c) container_of(c, struct at91_gpio_chip, chip)
-
-static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset);
-static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip);
-static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val);
-static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset);
-static int at91_gpiolib_get_direction(struct gpio_chip *chip, unsigned offset);
-static int at91_gpiolib_direction_output(struct gpio_chip *chip,
- unsigned offset, int val);
-static int at91_gpiolib_direction_input(struct gpio_chip *chip,
- unsigned offset);
-static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset);
-
-#define AT91_GPIO_CHIP(name) \
- { \
- .chip = { \
- .label = name, \
- .request = at91_gpiolib_request, \
- .get_direction = at91_gpiolib_get_direction, \
- .direction_input = at91_gpiolib_direction_input, \
- .direction_output = at91_gpiolib_direction_output, \
- .get = at91_gpiolib_get, \
- .set = at91_gpiolib_set, \
- .dbg_show = at91_gpiolib_dbg_show, \
- .to_irq = at91_gpiolib_to_irq, \
- .ngpio = MAX_NB_GPIO_PER_BANK, \
- }, \
- }
-
-static struct at91_gpio_chip gpio_chip[] = {
- AT91_GPIO_CHIP("pioA"),
- AT91_GPIO_CHIP("pioB"),
- AT91_GPIO_CHIP("pioC"),
- AT91_GPIO_CHIP("pioD"),
- AT91_GPIO_CHIP("pioE"),
-};
-
-static int gpio_banks;
-static unsigned long at91_gpio_caps;
-
-/* All PIO controllers support PIO3 features */
-#define AT91_GPIO_CAP_PIO3 (1 << 0)
-
-#define has_pio3() (at91_gpio_caps & AT91_GPIO_CAP_PIO3)
-
-/*--------------------------------------------------------------------------*/
-
-static inline void __iomem *pin_to_controller(unsigned pin)
-{
- pin /= MAX_NB_GPIO_PER_BANK;
- if (likely(pin < gpio_banks))
- return gpio_chip[pin].regbase;
-
- return NULL;
-}
-
-static inline unsigned pin_to_mask(unsigned pin)
-{
- return 1 << (pin % MAX_NB_GPIO_PER_BANK);
-}
-
-
-static char peripheral_function(void __iomem *pio, unsigned mask)
-{
- char ret = 'X';
- u8 select;
-
- if (pio) {
- if (has_pio3()) {
- select = !!(__raw_readl(pio + PIO_ABCDSR1) & mask);
- select |= (!!(__raw_readl(pio + PIO_ABCDSR2) & mask) << 1);
- ret = 'A' + select;
- } else {
- ret = __raw_readl(pio + PIO_ABSR) & mask ?
- 'B' : 'A';
- }
- }
-
- return ret;
-}
-
-/*--------------------------------------------------------------------------*/
-
-/* Not all hardware capabilities are exposed through these calls; they
- * only encapsulate the most common features and modes. (So if you
- * want to change signals in groups, do it directly.)
- *
- * Bootloaders will usually handle some of the pin multiplexing setup.
- * The intent is certainly that by the time Linux is fully booted, all
- * pins should have been fully initialized. These setup calls should
- * only be used by board setup routines, or possibly in driver probe().
- *
- * For bootloaders doing all that setup, these calls could be inlined
- * as NOPs so Linux won't duplicate any setup code
- */
-
-
-/*
- * mux the pin to the "GPIO" peripheral role.
- */
-int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (!pio)
- return -EINVAL;
- __raw_writel(mask, pio + PIO_IDR);
- __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
- __raw_writel(mask, pio + PIO_PER);
- return 0;
-}
-EXPORT_SYMBOL(at91_set_GPIO_periph);
-
-
-/*
- * mux the pin to the "A" internal peripheral role.
- */
-int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (!pio)
- return -EINVAL;
-
- __raw_writel(mask, pio + PIO_IDR);
- __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
- if (has_pio3()) {
- __raw_writel(__raw_readl(pio + PIO_ABCDSR1) & ~mask,
- pio + PIO_ABCDSR1);
- __raw_writel(__raw_readl(pio + PIO_ABCDSR2) & ~mask,
- pio + PIO_ABCDSR2);
- } else {
- __raw_writel(mask, pio + PIO_ASR);
- }
- __raw_writel(mask, pio + PIO_PDR);
- return 0;
-}
-EXPORT_SYMBOL(at91_set_A_periph);
-
-
-/*
- * mux the pin to the "B" internal peripheral role.
- */
-int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (!pio)
- return -EINVAL;
-
- __raw_writel(mask, pio + PIO_IDR);
- __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
- if (has_pio3()) {
- __raw_writel(__raw_readl(pio + PIO_ABCDSR1) | mask,
- pio + PIO_ABCDSR1);
- __raw_writel(__raw_readl(pio + PIO_ABCDSR2) & ~mask,
- pio + PIO_ABCDSR2);
- } else {
- __raw_writel(mask, pio + PIO_BSR);
- }
- __raw_writel(mask, pio + PIO_PDR);
- return 0;
-}
-EXPORT_SYMBOL(at91_set_B_periph);
-
-
-/*
- * mux the pin to the "C" internal peripheral role.
- */
-int __init_or_module at91_set_C_periph(unsigned pin, int use_pullup)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (!pio || !has_pio3())
- return -EINVAL;
-
- __raw_writel(mask, pio + PIO_IDR);
- __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
- __raw_writel(__raw_readl(pio + PIO_ABCDSR1) & ~mask, pio + PIO_ABCDSR1);
- __raw_writel(__raw_readl(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2);
- __raw_writel(mask, pio + PIO_PDR);
- return 0;
-}
-EXPORT_SYMBOL(at91_set_C_periph);
-
-
-/*
- * mux the pin to the "D" internal peripheral role.
- */
-int __init_or_module at91_set_D_periph(unsigned pin, int use_pullup)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (!pio || !has_pio3())
- return -EINVAL;
-
- __raw_writel(mask, pio + PIO_IDR);
- __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
- __raw_writel(__raw_readl(pio + PIO_ABCDSR1) | mask, pio + PIO_ABCDSR1);
- __raw_writel(__raw_readl(pio + PIO_ABCDSR2) | mask, pio + PIO_ABCDSR2);
- __raw_writel(mask, pio + PIO_PDR);
- return 0;
-}
-EXPORT_SYMBOL(at91_set_D_periph);
-
-
-/*
- * mux the pin to the gpio controller (instead of "A", "B", "C"
- * or "D" peripheral), and configure it for an input.
- */
-int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (!pio)
- return -EINVAL;
-
- __raw_writel(mask, pio + PIO_IDR);
- __raw_writel(mask, pio + (use_pullup ? PIO_PUER : PIO_PUDR));
- __raw_writel(mask, pio + PIO_ODR);
- __raw_writel(mask, pio + PIO_PER);
- return 0;
-}
-EXPORT_SYMBOL(at91_set_gpio_input);
-
-
-/*
- * mux the pin to the gpio controller (instead of "A", "B", "C"
- * or "D" peripheral), and configure it for an output.
- */
-int __init_or_module at91_set_gpio_output(unsigned pin, int value)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (!pio)
- return -EINVAL;
-
- __raw_writel(mask, pio + PIO_IDR);
- __raw_writel(mask, pio + PIO_PUDR);
- __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
- __raw_writel(mask, pio + PIO_OER);
- __raw_writel(mask, pio + PIO_PER);
- return 0;
-}
-EXPORT_SYMBOL(at91_set_gpio_output);
-
-
-/*
- * enable/disable the glitch filter; mostly used with IRQ handling.
- */
-int __init_or_module at91_set_deglitch(unsigned pin, int is_on)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (!pio)
- return -EINVAL;
-
- if (has_pio3() && is_on)
- __raw_writel(mask, pio + PIO_IFSCDR);
- __raw_writel(mask, pio + (is_on ? PIO_IFER : PIO_IFDR));
- return 0;
-}
-EXPORT_SYMBOL(at91_set_deglitch);
-
-/*
- * enable/disable the debounce filter;
- */
-int __init_or_module at91_set_debounce(unsigned pin, int is_on, int div)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (!pio || !has_pio3())
- return -EINVAL;
-
- if (is_on) {
- __raw_writel(mask, pio + PIO_IFSCER);
- __raw_writel(div & PIO_SCDR_DIV, pio + PIO_SCDR);
- __raw_writel(mask, pio + PIO_IFER);
- } else {
- __raw_writel(mask, pio + PIO_IFDR);
- }
- return 0;
-}
-EXPORT_SYMBOL(at91_set_debounce);
-
-/*
- * enable/disable the multi-driver; This is only valid for output and
- * allows the output pin to run as an open collector output.
- */
-int __init_or_module at91_set_multi_drive(unsigned pin, int is_on)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (!pio)
- return -EINVAL;
-
- __raw_writel(mask, pio + (is_on ? PIO_MDER : PIO_MDDR));
- return 0;
-}
-EXPORT_SYMBOL(at91_set_multi_drive);
-
-/*
- * enable/disable the pull-down.
- * If pull-up already enabled while calling the function, we disable it.
- */
-int __init_or_module at91_set_pulldown(unsigned pin, int is_on)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (!pio || !has_pio3())
- return -EINVAL;
-
- /* Disable pull-up anyway */
- __raw_writel(mask, pio + PIO_PUDR);
- __raw_writel(mask, pio + (is_on ? PIO_PPDER : PIO_PPDDR));
- return 0;
-}
-EXPORT_SYMBOL(at91_set_pulldown);
-
-/*
- * disable Schmitt trigger
- */
-int __init_or_module at91_disable_schmitt_trig(unsigned pin)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (!pio || !has_pio3())
- return -EINVAL;
-
- __raw_writel(__raw_readl(pio + PIO_SCHMITT) | mask, pio + PIO_SCHMITT);
- return 0;
-}
-EXPORT_SYMBOL(at91_disable_schmitt_trig);
-
-/*
- * assuming the pin is muxed as a gpio output, set its value.
- */
-int at91_set_gpio_value(unsigned pin, int value)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (!pio)
- return -EINVAL;
- __raw_writel(mask, pio + (value ? PIO_SODR : PIO_CODR));
- return 0;
-}
-EXPORT_SYMBOL(at91_set_gpio_value);
-
-
-/*
- * read the pin's value (works even if it's not muxed as a gpio).
- */
-int at91_get_gpio_value(unsigned pin)
-{
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
- u32 pdsr;
-
- if (!pio)
- return -EINVAL;
- pdsr = __raw_readl(pio + PIO_PDSR);
- return (pdsr & mask) != 0;
-}
-EXPORT_SYMBOL(at91_get_gpio_value);
-
-/*--------------------------------------------------------------------------*/
-
-#ifdef CONFIG_PM
-
-static u32 wakeups[MAX_GPIO_BANKS];
-static u32 backups[MAX_GPIO_BANKS];
-
-static int gpio_irq_set_wake(struct irq_data *d, unsigned state)
-{
- struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
- unsigned mask = 1 << d->hwirq;
- unsigned bank = at91_gpio->pioc_idx;
-
- if (unlikely(bank >= MAX_GPIO_BANKS))
- return -EINVAL;
-
- if (state)
- wakeups[bank] |= mask;
- else
- wakeups[bank] &= ~mask;
-
- irq_set_irq_wake(at91_gpio->pioc_virq, state);
-
- return 0;
-}
-
-void at91_gpio_suspend(void)
-{
- int i;
-
- for (i = 0; i < gpio_banks; i++) {
- void __iomem *pio = gpio_chip[i].regbase;
-
- backups[i] = __raw_readl(pio + PIO_IMR);
- __raw_writel(backups[i], pio + PIO_IDR);
- __raw_writel(wakeups[i], pio + PIO_IER);
-
- if (!wakeups[i]) {
- clk_unprepare(gpio_chip[i].clock);
- clk_disable(gpio_chip[i].clock);
- } else {
-#ifdef CONFIG_PM_DEBUG
- printk(KERN_DEBUG "GPIO-%c may wake for %08x\n", 'A'+i, wakeups[i]);
-#endif
- }
- }
-}
-
-void at91_gpio_resume(void)
-{
- int i;
-
- for (i = 0; i < gpio_banks; i++) {
- void __iomem *pio = gpio_chip[i].regbase;
-
- if (!wakeups[i]) {
- if (clk_prepare(gpio_chip[i].clock) == 0)
- clk_enable(gpio_chip[i].clock);
- }
-
- __raw_writel(wakeups[i], pio + PIO_IDR);
- __raw_writel(backups[i], pio + PIO_IER);
- }
-}
-
-#else
-#define gpio_irq_set_wake NULL
-#endif
-
-
-/* Several AIC controller irqs are dispatched through this GPIO handler.
- * To use any AT91_PIN_* as an externally triggered IRQ, first call
- * at91_set_gpio_input() then maybe enable its glitch filter.
- * Then just request_irq() with the pin ID; it works like any ARM IRQ
- * handler.
- * First implementation always triggers on rising and falling edges
- * whereas the newer PIO3 can be additionally configured to trigger on
- * level, edge with any polarity.
- *
- * Alternatively, certain pins may be used directly as IRQ0..IRQ6 after
- * configuring them with at91_set_a_periph() or at91_set_b_periph().
- * IRQ0..IRQ6 should be configurable, e.g. level vs edge triggering.
- */
-
-static void gpio_irq_mask(struct irq_data *d)
-{
- struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
- void __iomem *pio = at91_gpio->regbase;
- unsigned mask = 1 << d->hwirq;
-
- if (pio)
- __raw_writel(mask, pio + PIO_IDR);
-}
-
-static void gpio_irq_unmask(struct irq_data *d)
-{
- struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
- void __iomem *pio = at91_gpio->regbase;
- unsigned mask = 1 << d->hwirq;
-
- if (pio)
- __raw_writel(mask, pio + PIO_IER);
-}
-
-static int gpio_irq_type(struct irq_data *d, unsigned type)
-{
- switch (type) {
- case IRQ_TYPE_NONE:
- case IRQ_TYPE_EDGE_BOTH:
- return 0;
- default:
- return -EINVAL;
- }
-}
-
-/* Alternate irq type for PIO3 support */
-static int alt_gpio_irq_type(struct irq_data *d, unsigned type)
-{
- struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(d);
- void __iomem *pio = at91_gpio->regbase;
- unsigned mask = 1 << d->hwirq;
-
- switch (type) {
- case IRQ_TYPE_EDGE_RISING:
- __raw_writel(mask, pio + PIO_ESR);
- __raw_writel(mask, pio + PIO_REHLSR);
- break;
- case IRQ_TYPE_EDGE_FALLING:
- __raw_writel(mask, pio + PIO_ESR);
- __raw_writel(mask, pio + PIO_FELLSR);
- break;
- case IRQ_TYPE_LEVEL_LOW:
- __raw_writel(mask, pio + PIO_LSR);
- __raw_writel(mask, pio + PIO_FELLSR);
- break;
- case IRQ_TYPE_LEVEL_HIGH:
- __raw_writel(mask, pio + PIO_LSR);
- __raw_writel(mask, pio + PIO_REHLSR);
- break;
- case IRQ_TYPE_EDGE_BOTH:
- /*
- * disable additional interrupt modes:
- * fall back to default behavior
- */
- __raw_writel(mask, pio + PIO_AIMDR);
- return 0;
- case IRQ_TYPE_NONE:
- default:
- pr_warn("AT91: No type for irq %d\n", gpio_to_irq(d->irq));
- return -EINVAL;
- }
-
- /* enable additional interrupt modes */
- __raw_writel(mask, pio + PIO_AIMER);
-
- return 0;
-}
-
-static struct irq_chip gpio_irqchip = {
- .name = "GPIO",
- .irq_disable = gpio_irq_mask,
- .irq_mask = gpio_irq_mask,
- .irq_unmask = gpio_irq_unmask,
- /* .irq_set_type is set dynamically */
- .irq_set_wake = gpio_irq_set_wake,
-};
-
-static void gpio_irq_handler(unsigned irq, struct irq_desc *desc)
-{
- struct irq_chip *chip = irq_desc_get_chip(desc);
- struct irq_data *idata = irq_desc_get_irq_data(desc);
- struct at91_gpio_chip *at91_gpio = irq_data_get_irq_chip_data(idata);
- void __iomem *pio = at91_gpio->regbase;
- unsigned long isr;
- int n;
-
- chained_irq_enter(chip, desc);
- for (;;) {
- /* Reading ISR acks pending (edge triggered) GPIO interrupts.
- * When there none are pending, we're finished unless we need
- * to process multiple banks (like ID_PIOCDE on sam9263).
- */
- isr = __raw_readl(pio + PIO_ISR) & __raw_readl(pio + PIO_IMR);
- if (!isr) {
- if (!at91_gpio->next)
- break;
- at91_gpio = at91_gpio->next;
- pio = at91_gpio->regbase;
- continue;
- }
-
- n = find_first_bit(&isr, BITS_PER_LONG);
- while (n < BITS_PER_LONG) {
- generic_handle_irq(irq_find_mapping(at91_gpio->domain, n));
- n = find_next_bit(&isr, BITS_PER_LONG, n + 1);
- }
- }
- chained_irq_exit(chip, desc);
- /* now it may re-trigger */
-}
-
-/*--------------------------------------------------------------------------*/
-
-#ifdef CONFIG_DEBUG_FS
-
-static void gpio_printf(struct seq_file *s, void __iomem *pio, unsigned mask)
-{
- char *trigger = NULL;
- char *polarity = NULL;
-
- if (__raw_readl(pio + PIO_IMR) & mask) {
- if (!has_pio3() || !(__raw_readl(pio + PIO_AIMMR) & mask )) {
- trigger = "edge";
- polarity = "both";
- } else {
- if (__raw_readl(pio + PIO_ELSR) & mask) {
- trigger = "level";
- polarity = __raw_readl(pio + PIO_FRLHSR) & mask ?
- "high" : "low";
- } else {
- trigger = "edge";
- polarity = __raw_readl(pio + PIO_FRLHSR) & mask ?
- "rising" : "falling";
- }
- }
- seq_printf(s, "IRQ:%s-%s\t", trigger, polarity);
- } else {
- seq_printf(s, "GPIO:%s\t\t",
- __raw_readl(pio + PIO_PDSR) & mask ? "1" : "0");
- }
-}
-
-static int at91_gpio_show(struct seq_file *s, void *unused)
-{
- int bank, j;
-
- /* print heading */
- seq_printf(s, "Pin\t");
- for (bank = 0; bank < gpio_banks; bank++) {
- seq_printf(s, "PIO%c\t\t", 'A' + bank);
- };
- seq_printf(s, "\n\n");
-
- /* print pin status */
- for (j = 0; j < 32; j++) {
- seq_printf(s, "%i:\t", j);
-
- for (bank = 0; bank < gpio_banks; bank++) {
- unsigned pin = (32 * bank) + j;
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
-
- if (__raw_readl(pio + PIO_PSR) & mask)
- gpio_printf(s, pio, mask);
- else
- seq_printf(s, "%c\t\t",
- peripheral_function(pio, mask));
- }
-
- seq_printf(s, "\n");
- }
-
- return 0;
-}
-
-static int at91_gpio_open(struct inode *inode, struct file *file)
-{
- return single_open(file, at91_gpio_show, NULL);
-}
-
-static const struct file_operations at91_gpio_operations = {
- .open = at91_gpio_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int __init at91_gpio_debugfs_init(void)
-{
- /* /sys/kernel/debug/at91_gpio */
- (void) debugfs_create_file("at91_gpio", S_IFREG | S_IRUGO, NULL, NULL, &at91_gpio_operations);
- return 0;
-}
-postcore_initcall(at91_gpio_debugfs_init);
-
-#endif
-
-/*--------------------------------------------------------------------------*/
-
-/*
- * This lock class tells lockdep that GPIO irqs are in a different
- * category than their parents, so it won't report false recursion.
- */
-static struct lock_class_key gpio_lock_class;
-
-/*
- * irqdomain initialization: pile up irqdomains on top of AIC range
- */
-static void __init at91_gpio_irqdomain(struct at91_gpio_chip *at91_gpio)
-{
- int irq_base;
-
- irq_base = irq_alloc_descs(-1, 0, at91_gpio->chip.ngpio, 0);
- if (irq_base < 0)
- panic("at91_gpio.%d: error %d: couldn't allocate IRQ numbers.\n",
- at91_gpio->pioc_idx, irq_base);
- at91_gpio->domain = irq_domain_add_legacy(NULL, at91_gpio->chip.ngpio,
- irq_base, 0,
- &irq_domain_simple_ops, NULL);
- if (!at91_gpio->domain)
- panic("at91_gpio.%d: couldn't allocate irq domain.\n",
- at91_gpio->pioc_idx);
-}
-
-/*
- * Called from the processor-specific init to enable GPIO interrupt support.
- */
-void __init at91_gpio_irq_setup(void)
-{
- unsigned pioc;
- int gpio_irqnbr = 0;
- struct at91_gpio_chip *this, *prev;
-
- /* Setup proper .irq_set_type function */
- if (has_pio3())
- gpio_irqchip.irq_set_type = alt_gpio_irq_type;
- else
- gpio_irqchip.irq_set_type = gpio_irq_type;
-
- for (pioc = 0, this = gpio_chip, prev = NULL;
- pioc++ < gpio_banks;
- prev = this, this++) {
- int offset;
-
- __raw_writel(~0, this->regbase + PIO_IDR);
-
- /* setup irq domain for this GPIO controller */
- at91_gpio_irqdomain(this);
-
- for (offset = 0; offset < this->chip.ngpio; offset++) {
- unsigned int virq = irq_find_mapping(this->domain, offset);
- irq_set_lockdep_class(virq, &gpio_lock_class);
-
- /*
- * Can use the "simple" and not "edge" handler since it's
- * shorter, and the AIC handles interrupts sanely.
- */
- irq_set_chip_and_handler(virq, &gpio_irqchip,
- handle_simple_irq);
- set_irq_flags(virq, IRQF_VALID);
- irq_set_chip_data(virq, this);
-
- gpio_irqnbr++;
- }
-
- /* The toplevel handler handles one bank of GPIOs, except
- * on some SoC it can handles up to three...
- * We only set up the handler for the first of the list.
- */
- if (prev && prev->next == this)
- continue;
-
- this->pioc_virq = irq_create_mapping(NULL, this->pioc_hwirq);
- irq_set_chip_data(this->pioc_virq, this);
- irq_set_chained_handler(this->pioc_virq, gpio_irq_handler);
- }
- pr_info("AT91: %d gpio irqs in %d banks\n", gpio_irqnbr, gpio_banks);
-}
-
-/* gpiolib support */
-static int at91_gpiolib_request(struct gpio_chip *chip, unsigned offset)
-{
- struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
- void __iomem *pio = at91_gpio->regbase;
- unsigned mask = 1 << offset;
-
- __raw_writel(mask, pio + PIO_PER);
- return 0;
-}
-
-static int at91_gpiolib_get_direction(struct gpio_chip *chip, unsigned offset)
-{
- struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
- void __iomem *pio = at91_gpio->regbase;
- unsigned mask = 1 << offset;
- u32 osr;
-
- osr = __raw_readl(pio + PIO_OSR);
- return !(osr & mask);
-}
-
-static int at91_gpiolib_direction_input(struct gpio_chip *chip,
- unsigned offset)
-{
- struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
- void __iomem *pio = at91_gpio->regbase;
- unsigned mask = 1 << offset;
-
- __raw_writel(mask, pio + PIO_ODR);
- return 0;
-}
-
-static int at91_gpiolib_direction_output(struct gpio_chip *chip,
- unsigned offset, int val)
-{
- struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
- void __iomem *pio = at91_gpio->regbase;
- unsigned mask = 1 << offset;
-
- __raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR));
- __raw_writel(mask, pio + PIO_OER);
- return 0;
-}
-
-static int at91_gpiolib_get(struct gpio_chip *chip, unsigned offset)
-{
- struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
- void __iomem *pio = at91_gpio->regbase;
- unsigned mask = 1 << offset;
- u32 pdsr;
-
- pdsr = __raw_readl(pio + PIO_PDSR);
- return (pdsr & mask) != 0;
-}
-
-static void at91_gpiolib_set(struct gpio_chip *chip, unsigned offset, int val)
-{
- struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
- void __iomem *pio = at91_gpio->regbase;
- unsigned mask = 1 << offset;
-
- __raw_writel(mask, pio + (val ? PIO_SODR : PIO_CODR));
-}
-
-static void at91_gpiolib_dbg_show(struct seq_file *s, struct gpio_chip *chip)
-{
- int i;
-
- for (i = 0; i < chip->ngpio; i++) {
- unsigned pin = chip->base + i;
- void __iomem *pio = pin_to_controller(pin);
- unsigned mask = pin_to_mask(pin);
- const char *gpio_label;
-
- gpio_label = gpiochip_is_requested(chip, i);
- if (gpio_label) {
- seq_printf(s, "[%s] GPIO%s%d: ",
- gpio_label, chip->label, i);
- if (__raw_readl(pio + PIO_PSR) & mask)
- seq_printf(s, "[gpio] %s\n",
- at91_get_gpio_value(pin) ?
- "set" : "clear");
- else
- seq_printf(s, "[periph %c]\n",
- peripheral_function(pio, mask));
- }
- }
-}
-
-static int at91_gpiolib_to_irq(struct gpio_chip *chip, unsigned offset)
-{
- struct at91_gpio_chip *at91_gpio = to_at91_gpio_chip(chip);
- int virq;
-
- if (offset < chip->ngpio)
- virq = irq_create_mapping(at91_gpio->domain, offset);
- else
- virq = -ENXIO;
-
- dev_dbg(chip->dev, "%s: request IRQ for GPIO %d, return %d\n",
- chip->label, offset + chip->base, virq);
- return virq;
-}
-
-static int __init at91_gpio_setup_clk(int idx)
-{
- struct at91_gpio_chip *at91_gpio = &gpio_chip[idx];
-
- /* retreive PIO controller's clock */
- at91_gpio->clock = clk_get_sys(NULL, at91_gpio->chip.label);
- if (IS_ERR(at91_gpio->clock)) {
- pr_err("at91_gpio.%d, failed to get clock, ignoring.\n", idx);
- goto err;
- }
-
- if (clk_prepare(at91_gpio->clock))
- goto clk_prep_err;
-
- /* enable PIO controller's clock */
- if (clk_enable(at91_gpio->clock)) {
- pr_err("at91_gpio.%d, failed to enable clock, ignoring.\n", idx);
- goto clk_err;
- }
-
- return 0;
-
-clk_err:
- clk_unprepare(at91_gpio->clock);
-clk_prep_err:
- clk_put(at91_gpio->clock);
-err:
- return -EINVAL;
-}
-
-static void __init at91_gpio_init_one(int idx, u32 regbase, int pioc_hwirq)
-{
- struct at91_gpio_chip *at91_gpio = &gpio_chip[idx];
-
- at91_gpio->chip.base = idx * MAX_NB_GPIO_PER_BANK;
- at91_gpio->pioc_hwirq = pioc_hwirq;
- at91_gpio->pioc_idx = idx;
-
- at91_gpio->regbase = ioremap(regbase, 512);
- if (!at91_gpio->regbase) {
- pr_err("at91_gpio.%d, failed to map registers, ignoring.\n", idx);
- return;
- }
-
- if (at91_gpio_setup_clk(idx))
- goto ioremap_err;
-
- gpio_banks = max(gpio_banks, idx + 1);
- return;
-
-ioremap_err:
- iounmap(at91_gpio->regbase);
-}
-
-/*
- * Called from the processor-specific init to enable GPIO pin support.
- */
-void __init at91_gpio_init(struct at91_gpio_bank *data, int nr_banks)
-{
- unsigned i;
- struct at91_gpio_chip *at91_gpio, *last = NULL;
-
- BUG_ON(nr_banks > MAX_GPIO_BANKS);
-
- if (of_have_populated_dt())
- return;
-
- for (i = 0; i < nr_banks; i++)
- at91_gpio_init_one(i, data[i].regbase, data[i].id);
-
- for (i = 0; i < gpio_banks; i++) {
- at91_gpio = &gpio_chip[i];
-
- /*
- * GPIO controller are grouped on some SoC:
- * PIOC, PIOD and PIOE can share the same IRQ line
- */
- if (last && last->pioc_hwirq == at91_gpio->pioc_hwirq)
- last->next = at91_gpio;
- last = at91_gpio;
-
- gpiochip_add(&at91_gpio->chip);
- }
-}
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/gpio.h
- *
- * Copyright (C) 2005 HP Labs
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#ifndef __ASM_ARCH_AT91RM9200_GPIO_H
-#define __ASM_ARCH_AT91RM9200_GPIO_H
-
-#include <linux/kernel.h>
-#include <asm/irq.h>
-
-#define MAX_GPIO_BANKS 5
-#define NR_BUILTIN_GPIO (MAX_GPIO_BANKS * 32)
-
-/* these pin numbers double as IRQ numbers, like AT91xxx_ID_* values */
-
-#define AT91_PIN_PA0 (0x00 + 0)
-#define AT91_PIN_PA1 (0x00 + 1)
-#define AT91_PIN_PA2 (0x00 + 2)
-#define AT91_PIN_PA3 (0x00 + 3)
-#define AT91_PIN_PA4 (0x00 + 4)
-#define AT91_PIN_PA5 (0x00 + 5)
-#define AT91_PIN_PA6 (0x00 + 6)
-#define AT91_PIN_PA7 (0x00 + 7)
-#define AT91_PIN_PA8 (0x00 + 8)
-#define AT91_PIN_PA9 (0x00 + 9)
-#define AT91_PIN_PA10 (0x00 + 10)
-#define AT91_PIN_PA11 (0x00 + 11)
-#define AT91_PIN_PA12 (0x00 + 12)
-#define AT91_PIN_PA13 (0x00 + 13)
-#define AT91_PIN_PA14 (0x00 + 14)
-#define AT91_PIN_PA15 (0x00 + 15)
-#define AT91_PIN_PA16 (0x00 + 16)
-#define AT91_PIN_PA17 (0x00 + 17)
-#define AT91_PIN_PA18 (0x00 + 18)
-#define AT91_PIN_PA19 (0x00 + 19)
-#define AT91_PIN_PA20 (0x00 + 20)
-#define AT91_PIN_PA21 (0x00 + 21)
-#define AT91_PIN_PA22 (0x00 + 22)
-#define AT91_PIN_PA23 (0x00 + 23)
-#define AT91_PIN_PA24 (0x00 + 24)
-#define AT91_PIN_PA25 (0x00 + 25)
-#define AT91_PIN_PA26 (0x00 + 26)
-#define AT91_PIN_PA27 (0x00 + 27)
-#define AT91_PIN_PA28 (0x00 + 28)
-#define AT91_PIN_PA29 (0x00 + 29)
-#define AT91_PIN_PA30 (0x00 + 30)
-#define AT91_PIN_PA31 (0x00 + 31)
-
-#define AT91_PIN_PB0 (0x20 + 0)
-#define AT91_PIN_PB1 (0x20 + 1)
-#define AT91_PIN_PB2 (0x20 + 2)
-#define AT91_PIN_PB3 (0x20 + 3)
-#define AT91_PIN_PB4 (0x20 + 4)
-#define AT91_PIN_PB5 (0x20 + 5)
-#define AT91_PIN_PB6 (0x20 + 6)
-#define AT91_PIN_PB7 (0x20 + 7)
-#define AT91_PIN_PB8 (0x20 + 8)
-#define AT91_PIN_PB9 (0x20 + 9)
-#define AT91_PIN_PB10 (0x20 + 10)
-#define AT91_PIN_PB11 (0x20 + 11)
-#define AT91_PIN_PB12 (0x20 + 12)
-#define AT91_PIN_PB13 (0x20 + 13)
-#define AT91_PIN_PB14 (0x20 + 14)
-#define AT91_PIN_PB15 (0x20 + 15)
-#define AT91_PIN_PB16 (0x20 + 16)
-#define AT91_PIN_PB17 (0x20 + 17)
-#define AT91_PIN_PB18 (0x20 + 18)
-#define AT91_PIN_PB19 (0x20 + 19)
-#define AT91_PIN_PB20 (0x20 + 20)
-#define AT91_PIN_PB21 (0x20 + 21)
-#define AT91_PIN_PB22 (0x20 + 22)
-#define AT91_PIN_PB23 (0x20 + 23)
-#define AT91_PIN_PB24 (0x20 + 24)
-#define AT91_PIN_PB25 (0x20 + 25)
-#define AT91_PIN_PB26 (0x20 + 26)
-#define AT91_PIN_PB27 (0x20 + 27)
-#define AT91_PIN_PB28 (0x20 + 28)
-#define AT91_PIN_PB29 (0x20 + 29)
-#define AT91_PIN_PB30 (0x20 + 30)
-#define AT91_PIN_PB31 (0x20 + 31)
-
-#define AT91_PIN_PC0 (0x40 + 0)
-#define AT91_PIN_PC1 (0x40 + 1)
-#define AT91_PIN_PC2 (0x40 + 2)
-#define AT91_PIN_PC3 (0x40 + 3)
-#define AT91_PIN_PC4 (0x40 + 4)
-#define AT91_PIN_PC5 (0x40 + 5)
-#define AT91_PIN_PC6 (0x40 + 6)
-#define AT91_PIN_PC7 (0x40 + 7)
-#define AT91_PIN_PC8 (0x40 + 8)
-#define AT91_PIN_PC9 (0x40 + 9)
-#define AT91_PIN_PC10 (0x40 + 10)
-#define AT91_PIN_PC11 (0x40 + 11)
-#define AT91_PIN_PC12 (0x40 + 12)
-#define AT91_PIN_PC13 (0x40 + 13)
-#define AT91_PIN_PC14 (0x40 + 14)
-#define AT91_PIN_PC15 (0x40 + 15)
-#define AT91_PIN_PC16 (0x40 + 16)
-#define AT91_PIN_PC17 (0x40 + 17)
-#define AT91_PIN_PC18 (0x40 + 18)
-#define AT91_PIN_PC19 (0x40 + 19)
-#define AT91_PIN_PC20 (0x40 + 20)
-#define AT91_PIN_PC21 (0x40 + 21)
-#define AT91_PIN_PC22 (0x40 + 22)
-#define AT91_PIN_PC23 (0x40 + 23)
-#define AT91_PIN_PC24 (0x40 + 24)
-#define AT91_PIN_PC25 (0x40 + 25)
-#define AT91_PIN_PC26 (0x40 + 26)
-#define AT91_PIN_PC27 (0x40 + 27)
-#define AT91_PIN_PC28 (0x40 + 28)
-#define AT91_PIN_PC29 (0x40 + 29)
-#define AT91_PIN_PC30 (0x40 + 30)
-#define AT91_PIN_PC31 (0x40 + 31)
-
-#define AT91_PIN_PD0 (0x60 + 0)
-#define AT91_PIN_PD1 (0x60 + 1)
-#define AT91_PIN_PD2 (0x60 + 2)
-#define AT91_PIN_PD3 (0x60 + 3)
-#define AT91_PIN_PD4 (0x60 + 4)
-#define AT91_PIN_PD5 (0x60 + 5)
-#define AT91_PIN_PD6 (0x60 + 6)
-#define AT91_PIN_PD7 (0x60 + 7)
-#define AT91_PIN_PD8 (0x60 + 8)
-#define AT91_PIN_PD9 (0x60 + 9)
-#define AT91_PIN_PD10 (0x60 + 10)
-#define AT91_PIN_PD11 (0x60 + 11)
-#define AT91_PIN_PD12 (0x60 + 12)
-#define AT91_PIN_PD13 (0x60 + 13)
-#define AT91_PIN_PD14 (0x60 + 14)
-#define AT91_PIN_PD15 (0x60 + 15)
-#define AT91_PIN_PD16 (0x60 + 16)
-#define AT91_PIN_PD17 (0x60 + 17)
-#define AT91_PIN_PD18 (0x60 + 18)
-#define AT91_PIN_PD19 (0x60 + 19)
-#define AT91_PIN_PD20 (0x60 + 20)
-#define AT91_PIN_PD21 (0x60 + 21)
-#define AT91_PIN_PD22 (0x60 + 22)
-#define AT91_PIN_PD23 (0x60 + 23)
-#define AT91_PIN_PD24 (0x60 + 24)
-#define AT91_PIN_PD25 (0x60 + 25)
-#define AT91_PIN_PD26 (0x60 + 26)
-#define AT91_PIN_PD27 (0x60 + 27)
-#define AT91_PIN_PD28 (0x60 + 28)
-#define AT91_PIN_PD29 (0x60 + 29)
-#define AT91_PIN_PD30 (0x60 + 30)
-#define AT91_PIN_PD31 (0x60 + 31)
-
-#define AT91_PIN_PE0 (0x80 + 0)
-#define AT91_PIN_PE1 (0x80 + 1)
-#define AT91_PIN_PE2 (0x80 + 2)
-#define AT91_PIN_PE3 (0x80 + 3)
-#define AT91_PIN_PE4 (0x80 + 4)
-#define AT91_PIN_PE5 (0x80 + 5)
-#define AT91_PIN_PE6 (0x80 + 6)
-#define AT91_PIN_PE7 (0x80 + 7)
-#define AT91_PIN_PE8 (0x80 + 8)
-#define AT91_PIN_PE9 (0x80 + 9)
-#define AT91_PIN_PE10 (0x80 + 10)
-#define AT91_PIN_PE11 (0x80 + 11)
-#define AT91_PIN_PE12 (0x80 + 12)
-#define AT91_PIN_PE13 (0x80 + 13)
-#define AT91_PIN_PE14 (0x80 + 14)
-#define AT91_PIN_PE15 (0x80 + 15)
-#define AT91_PIN_PE16 (0x80 + 16)
-#define AT91_PIN_PE17 (0x80 + 17)
-#define AT91_PIN_PE18 (0x80 + 18)
-#define AT91_PIN_PE19 (0x80 + 19)
-#define AT91_PIN_PE20 (0x80 + 20)
-#define AT91_PIN_PE21 (0x80 + 21)
-#define AT91_PIN_PE22 (0x80 + 22)
-#define AT91_PIN_PE23 (0x80 + 23)
-#define AT91_PIN_PE24 (0x80 + 24)
-#define AT91_PIN_PE25 (0x80 + 25)
-#define AT91_PIN_PE26 (0x80 + 26)
-#define AT91_PIN_PE27 (0x80 + 27)
-#define AT91_PIN_PE28 (0x80 + 28)
-#define AT91_PIN_PE29 (0x80 + 29)
-#define AT91_PIN_PE30 (0x80 + 30)
-#define AT91_PIN_PE31 (0x80 + 31)
-
-#ifndef __ASSEMBLY__
-/* setup setup routines, called from board init or driver probe() */
-extern int __init_or_module at91_set_GPIO_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_A_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_B_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_C_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_D_periph(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_gpio_input(unsigned pin, int use_pullup);
-extern int __init_or_module at91_set_gpio_output(unsigned pin, int value);
-extern int __init_or_module at91_set_deglitch(unsigned pin, int is_on);
-extern int __init_or_module at91_set_debounce(unsigned pin, int is_on, int div);
-extern int __init_or_module at91_set_multi_drive(unsigned pin, int is_on);
-extern int __init_or_module at91_set_pulldown(unsigned pin, int is_on);
-extern int __init_or_module at91_disable_schmitt_trig(unsigned pin);
-
-/* callable at any time */
-extern int at91_set_gpio_value(unsigned pin, int value);
-extern int at91_get_gpio_value(unsigned pin);
-
-/* callable only from core power-management code */
-extern void at91_gpio_suspend(void);
-extern void at91_gpio_resume(void);
-
-#endif /* __ASSEMBLY__ */
-
-#endif
+++ /dev/null
-/* Buttons */
-#define GPIO_TRIG_NET_IN AT91_PIN_PB21
-#define GPIO_CARD_UNMOUNT_0 AT91_PIN_PB13
-#define GPIO_CARD_UNMOUNT_1 AT91_PIN_PB12
-#define GPIO_KEY_POWER AT91_PIN_PA25
-
-/* PCF8574 0x20 GPIO - U1 on the GS_IA18-CB_V3 board */
-#define GS_IA18_S_PCF_GPIO_BASE0 NR_BUILTIN_GPIO
-#define PCF_GPIO_HDC_POWER (GS_IA18_S_PCF_GPIO_BASE0 + 0)
-#define PCF_GPIO_WIFI_SETUP (GS_IA18_S_PCF_GPIO_BASE0 + 1)
-#define PCF_GPIO_WIFI_ENABLE (GS_IA18_S_PCF_GPIO_BASE0 + 2)
-#define PCF_GPIO_WIFI_RESET (GS_IA18_S_PCF_GPIO_BASE0 + 3)
-#define PCF_GPIO_ETH_DETECT 4 /* this is a GPI */
-#define PCF_GPIO_GPS_SETUP (GS_IA18_S_PCF_GPIO_BASE0 + 5)
-#define PCF_GPIO_GPS_STANDBY (GS_IA18_S_PCF_GPIO_BASE0 + 6)
-#define PCF_GPIO_GPS_POWER (GS_IA18_S_PCF_GPIO_BASE0 + 7)
-
-/* PCF8574 0x22 GPIO - U1 on the GS_2G_OPT1-A_V0 board (Alarm) */
-#define GS_IA18_S_PCF_GPIO_BASE1 (GS_IA18_S_PCF_GPIO_BASE0 + 8)
-#define PCF_GPIO_ALARM1 (GS_IA18_S_PCF_GPIO_BASE1 + 0)
-#define PCF_GPIO_ALARM2 (GS_IA18_S_PCF_GPIO_BASE1 + 1)
-#define PCF_GPIO_ALARM3 (GS_IA18_S_PCF_GPIO_BASE1 + 2)
-#define PCF_GPIO_ALARM4 (GS_IA18_S_PCF_GPIO_BASE1 + 3)
-/* bits 4, 5, 6 not used */
-#define PCF_GPIO_ALARM_V_RELAY_ON (GS_IA18_S_PCF_GPIO_BASE1 + 7)
-
-/* PCF8574 0x24 GPIO U1 on the GS_2G-OPT23-A_V0 board (Modem) */
-#define GS_IA18_S_PCF_GPIO_BASE2 (GS_IA18_S_PCF_GPIO_BASE1 + 8)
-#define PCF_GPIO_MODEM_POWER (GS_IA18_S_PCF_GPIO_BASE2 + 0)
-#define PCF_GPIO_MODEM_RESET (GS_IA18_S_PCF_GPIO_BASE2 + 3)
-/* bits 1, 2, 4, 5 not used */
-#define PCF_GPIO_TRX_RESET (GS_IA18_S_PCF_GPIO_BASE2 + 6)
-/* bit 7 not used */
#ifndef AT91_DBGU_H
#define AT91_DBGU_H
-#if !defined(CONFIG_ARCH_AT91X40)
#define AT91_DBGU_CR (0x00) /* Control Register */
#define AT91_DBGU_MR (0x04) /* Mode Register */
#define AT91_DBGU_IER (0x08) /* Interrupt Enable Register */
#define AT91_DBGU_FNR (0x48) /* Force NTRST Register [SAM9 only] */
#define AT91_DBGU_FNTRST (1 << 0) /* Force NTRST */
-#endif /* AT91_DBGU */
-
/*
* Some AT91 parts that don't have full DEBUG units still support the ID
* and extensions register.
#define AT91_MEMCTRL_SDRAMC 1
#define AT91_MEMCTRL_DDRSDR 2
-#include <mach/at91rm9200_sdramc.h>
-#include <mach/at91sam9_ddrsdr.h>
-#include <mach/at91sam9_sdramc.h>
+#include <soc/at91/at91rm9200_sdramc.h>
+#include <soc/at91/at91sam9_ddrsdr.h>
+#include <soc/at91/at91sam9_sdramc.h>
#endif /* __AT91_RAMC_H__ */
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h
- *
- * Copyright (C) 2005 Ivan Kokshaysky
- * Copyright (C) SAN People
- *
- * Memory Controllers (SDRAMC only) - System peripherals registers.
- * Based on AT91RM9200 datasheet revision E.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91RM9200_SDRAMC_H
-#define AT91RM9200_SDRAMC_H
-
-/* SDRAM Controller registers */
-#define AT91RM9200_SDRAMC_MR 0x90 /* Mode Register */
-#define AT91RM9200_SDRAMC_MODE (0xf << 0) /* Command Mode */
-#define AT91RM9200_SDRAMC_MODE_NORMAL (0 << 0)
-#define AT91RM9200_SDRAMC_MODE_NOP (1 << 0)
-#define AT91RM9200_SDRAMC_MODE_PRECHARGE (2 << 0)
-#define AT91RM9200_SDRAMC_MODE_LMR (3 << 0)
-#define AT91RM9200_SDRAMC_MODE_REFRESH (4 << 0)
-#define AT91RM9200_SDRAMC_DBW (1 << 4) /* Data Bus Width */
-#define AT91RM9200_SDRAMC_DBW_32 (0 << 4)
-#define AT91RM9200_SDRAMC_DBW_16 (1 << 4)
-
-#define AT91RM9200_SDRAMC_TR 0x94 /* Refresh Timer Register */
-#define AT91RM9200_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Count */
-
-#define AT91RM9200_SDRAMC_CR 0x98 /* Configuration Register */
-#define AT91RM9200_SDRAMC_NC (3 << 0) /* Number of Column Bits */
-#define AT91RM9200_SDRAMC_NC_8 (0 << 0)
-#define AT91RM9200_SDRAMC_NC_9 (1 << 0)
-#define AT91RM9200_SDRAMC_NC_10 (2 << 0)
-#define AT91RM9200_SDRAMC_NC_11 (3 << 0)
-#define AT91RM9200_SDRAMC_NR (3 << 2) /* Number of Row Bits */
-#define AT91RM9200_SDRAMC_NR_11 (0 << 2)
-#define AT91RM9200_SDRAMC_NR_12 (1 << 2)
-#define AT91RM9200_SDRAMC_NR_13 (2 << 2)
-#define AT91RM9200_SDRAMC_NB (1 << 4) /* Number of Banks */
-#define AT91RM9200_SDRAMC_NB_2 (0 << 4)
-#define AT91RM9200_SDRAMC_NB_4 (1 << 4)
-#define AT91RM9200_SDRAMC_CAS (3 << 5) /* CAS Latency */
-#define AT91RM9200_SDRAMC_CAS_2 (2 << 5)
-#define AT91RM9200_SDRAMC_TWR (0xf << 7) /* Write Recovery Delay */
-#define AT91RM9200_SDRAMC_TRC (0xf << 11) /* Row Cycle Delay */
-#define AT91RM9200_SDRAMC_TRP (0xf << 15) /* Row Precharge Delay */
-#define AT91RM9200_SDRAMC_TRCD (0xf << 19) /* Row to Column Delay */
-#define AT91RM9200_SDRAMC_TRAS (0xf << 23) /* Active to Precharge Delay */
-#define AT91RM9200_SDRAMC_TXSR (0xf << 27) /* Exit Self Refresh to Active Delay */
-
-#define AT91RM9200_SDRAMC_SRR 0x9c /* Self Refresh Register */
-#define AT91RM9200_SDRAMC_LPR 0xa0 /* Low Power Register */
-#define AT91RM9200_SDRAMC_IER 0xa4 /* Interrupt Enable Register */
-#define AT91RM9200_SDRAMC_IDR 0xa8 /* Interrupt Disable Register */
-#define AT91RM9200_SDRAMC_IMR 0xac /* Interrupt Mask Register */
-#define AT91RM9200_SDRAMC_ISR 0xb0 /* Interrupt Status Register */
-
-#endif
+++ /dev/null
-/*
- * Header file for the Atmel DDR/SDR SDRAM Controller
- *
- * Copyright (C) 2010 Atmel Corporation
- * Nicolas Ferre <nicolas.ferre@atmel.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-#ifndef AT91SAM9_DDRSDR_H
-#define AT91SAM9_DDRSDR_H
-
-#define AT91_DDRSDRC_MR 0x00 /* Mode Register */
-#define AT91_DDRSDRC_MODE (0x7 << 0) /* Command Mode */
-#define AT91_DDRSDRC_MODE_NORMAL 0
-#define AT91_DDRSDRC_MODE_NOP 1
-#define AT91_DDRSDRC_MODE_PRECHARGE 2
-#define AT91_DDRSDRC_MODE_LMR 3
-#define AT91_DDRSDRC_MODE_REFRESH 4
-#define AT91_DDRSDRC_MODE_EXT_LMR 5
-#define AT91_DDRSDRC_MODE_DEEP 6
-
-#define AT91_DDRSDRC_RTR 0x04 /* Refresh Timer Register */
-#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */
-
-#define AT91_DDRSDRC_CR 0x08 /* Configuration Register */
-#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */
-#define AT91_DDRSDRC_NC_SDR8 (0 << 0)
-#define AT91_DDRSDRC_NC_SDR9 (1 << 0)
-#define AT91_DDRSDRC_NC_SDR10 (2 << 0)
-#define AT91_DDRSDRC_NC_SDR11 (3 << 0)
-#define AT91_DDRSDRC_NC_DDR9 (0 << 0)
-#define AT91_DDRSDRC_NC_DDR10 (1 << 0)
-#define AT91_DDRSDRC_NC_DDR11 (2 << 0)
-#define AT91_DDRSDRC_NC_DDR12 (3 << 0)
-#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */
-#define AT91_DDRSDRC_NR_11 (0 << 2)
-#define AT91_DDRSDRC_NR_12 (1 << 2)
-#define AT91_DDRSDRC_NR_13 (2 << 2)
-#define AT91_DDRSDRC_NR_14 (3 << 2)
-#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */
-#define AT91_DDRSDRC_CAS_2 (2 << 4)
-#define AT91_DDRSDRC_CAS_3 (3 << 4)
-#define AT91_DDRSDRC_CAS_25 (6 << 4)
-#define AT91_DDRSDRC_RST_DLL (1 << 7) /* Reset DLL */
-#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */
-#define AT91_DDRSDRC_DIS_DLL (1 << 9) /* Disable DLL [SAM9 Only] */
-#define AT91_DDRSDRC_OCD (1 << 12) /* Off-Chip Driver [SAM9 Only] */
-#define AT91_DDRSDRC_DQMS (1 << 16) /* Mask Data is Shared [SAM9 Only] */
-#define AT91_DDRSDRC_ACTBST (1 << 18) /* Active Bank X to Burst Stop Read Access Bank Y [SAM9 Only] */
-
-#define AT91_DDRSDRC_T0PR 0x0C /* Timing 0 Register */
-#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */
-#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */
-#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */
-#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */
-#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */
-#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */
-#define AT91_DDRSDRC_TWTR (0x7 << 24) /* Internal Write to Read delay */
-#define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay [SAM9 Only] */
-#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */
-
-#define AT91_DDRSDRC_T1PR 0x10 /* Timing 1 Register */
-#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */
-#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */
-#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */
-#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */
-
-#define AT91_DDRSDRC_T2PR 0x14 /* Timing 2 Register [SAM9 Only] */
-#define AT91_DDRSDRC_TXARD (0xf << 0) /* Exit active power down delay to read command in mode "Fast Exit" */
-#define AT91_DDRSDRC_TXARDS (0xf << 4) /* Exit active power down delay to read command in mode "Slow Exit" */
-#define AT91_DDRSDRC_TRPA (0xf << 8) /* Row Precharge All delay */
-#define AT91_DDRSDRC_TRTP (0x7 << 12) /* Read to Precharge delay */
-
-#define AT91_DDRSDRC_LPR 0x1C /* Low Power Register */
-#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */
-#define AT91_DDRSDRC_LPCB_DISABLE 0
-#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1
-#define AT91_DDRSDRC_LPCB_POWER_DOWN 2
-#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3
-#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */
-#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */
-#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
-#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */
-#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
-#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12)
-#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12)
-#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12)
-#define AT91_DDRSDRC_APDE (1 << 16) /* Active power down exit time */
-#define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */
-
-#define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */
-#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */
-#define AT91_DDRSDRC_MD_SDR 0
-#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1
-#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3
-#define AT91_DDRSDRC_MD_DDR2 6 /* [SAM9 Only] */
-#define AT91_DDRSDRC_DBW (1 << 4) /* Data Bus Width */
-#define AT91_DDRSDRC_DBW_32BITS (0 << 4)
-#define AT91_DDRSDRC_DBW_16BITS (1 << 4)
-
-#define AT91_DDRSDRC_DLL 0x24 /* DLL Information Register */
-#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */
-#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */
-#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */
-#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */
-
-#define AT91_DDRSDRC_HS 0x2C /* High Speed Register [SAM9 Only] */
-#define AT91_DDRSDRC_DIS_ATCP_RD (1 << 2) /* Anticip read access is disabled */
-
-#define AT91_DDRSDRC_DELAY(n) (0x30 + (0x4 * (n))) /* Delay I/O Register n */
-
-#define AT91_DDRSDRC_WPMR 0xE4 /* Write Protect Mode Register [SAM9 Only] */
-#define AT91_DDRSDRC_WP (1 << 0) /* Write protect enable */
-#define AT91_DDRSDRC_WPKEY (0xffffff << 8) /* Write protect key */
-#define AT91_DDRSDRC_KEY (0x444452 << 8) /* Write protect key = "DDR" */
-
-#define AT91_DDRSDRC_WPSR 0xE8 /* Write Protect Status Register [SAM9 Only] */
-#define AT91_DDRSDRC_WPVS (1 << 0) /* Write protect violation status */
-#define AT91_DDRSDRC_WPVSRC (0xffff << 8) /* Write protect violation source */
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
- *
- * Copyright (C) 2007 Andrew Victor
- * Copyright (C) 2007 Atmel Corporation.
- *
- * SDRAM Controllers (SDRAMC) - System peripherals registers.
- * Based on AT91SAM9261 datasheet revision D.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91SAM9_SDRAMC_H
-#define AT91SAM9_SDRAMC_H
-
-/* SDRAM Controller (SDRAMC) registers */
-#define AT91_SDRAMC_MR 0x00 /* SDRAM Controller Mode Register */
-#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */
-#define AT91_SDRAMC_MODE_NORMAL 0
-#define AT91_SDRAMC_MODE_NOP 1
-#define AT91_SDRAMC_MODE_PRECHARGE 2
-#define AT91_SDRAMC_MODE_LMR 3
-#define AT91_SDRAMC_MODE_REFRESH 4
-#define AT91_SDRAMC_MODE_EXT_LMR 5
-#define AT91_SDRAMC_MODE_DEEP 6
-
-#define AT91_SDRAMC_TR 0x04 /* SDRAM Controller Refresh Timer Register */
-#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */
-
-#define AT91_SDRAMC_CR 0x08 /* SDRAM Controller Configuration Register */
-#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */
-#define AT91_SDRAMC_NC_8 (0 << 0)
-#define AT91_SDRAMC_NC_9 (1 << 0)
-#define AT91_SDRAMC_NC_10 (2 << 0)
-#define AT91_SDRAMC_NC_11 (3 << 0)
-#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
-#define AT91_SDRAMC_NR_11 (0 << 2)
-#define AT91_SDRAMC_NR_12 (1 << 2)
-#define AT91_SDRAMC_NR_13 (2 << 2)
-#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
-#define AT91_SDRAMC_NB_2 (0 << 4)
-#define AT91_SDRAMC_NB_4 (1 << 4)
-#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
-#define AT91_SDRAMC_CAS_1 (1 << 5)
-#define AT91_SDRAMC_CAS_2 (2 << 5)
-#define AT91_SDRAMC_CAS_3 (3 << 5)
-#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */
-#define AT91_SDRAMC_DBW_32 (0 << 7)
-#define AT91_SDRAMC_DBW_16 (1 << 7)
-#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */
-#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */
-#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */
-#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */
-#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */
-#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */
-
-#define AT91_SDRAMC_LPR 0x10 /* SDRAM Controller Low Power Register */
-#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */
-#define AT91_SDRAMC_LPCB_DISABLE 0
-#define AT91_SDRAMC_LPCB_SELF_REFRESH 1
-#define AT91_SDRAMC_LPCB_POWER_DOWN 2
-#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3
-#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */
-#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
-#define AT91_SDRAMC_DS (3 << 10) /* Drive Strength */
-#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
-#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12)
-#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12)
-#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12)
-
-#define AT91_SDRAMC_IER 0x14 /* SDRAM Controller Interrupt Enable Register */
-#define AT91_SDRAMC_IDR 0x18 /* SDRAM Controller Interrupt Disable Register */
-#define AT91_SDRAMC_IMR 0x1C /* SDRAM Controller Interrupt Mask Register */
-#define AT91_SDRAMC_ISR 0x20 /* SDRAM Controller Interrupt Status Register */
-#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */
-
-#define AT91_SDRAMC_MDR 0x24 /* SDRAM Memory Device Register */
-#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */
-#define AT91_SDRAMC_MD_SDRAM 0
-#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1
-
-#endif
+++ /dev/null
-/*
- * arch/arm/mach-at91/include/mach/at91x40.h
- *
- * (C) Copyright 2007, Greg Ungerer <gerg@snapgear.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#ifndef AT91X40_H
-#define AT91X40_H
-
-/*
- * IRQ list.
- */
-#define AT91X40_ID_USART0 2 /* USART port 0 */
-#define AT91X40_ID_USART1 3 /* USART port 1 */
-#define AT91X40_ID_TC0 4 /* Timer/Counter 0 */
-#define AT91X40_ID_TC1 5 /* Timer/Counter 1*/
-#define AT91X40_ID_TC2 6 /* Timer/Counter 2*/
-#define AT91X40_ID_WD 7 /* Watchdog? */
-#define AT91X40_ID_PIOA 8 /* Parallel IO Controller A */
-
-#define AT91X40_ID_IRQ0 16 /* External IRQ 0 */
-#define AT91X40_ID_IRQ1 17 /* External IRQ 1 */
-#define AT91X40_ID_IRQ2 18 /* External IRQ 2 */
-
-/*
- * System Peripherals
- */
-#define AT91_BASE_SYS 0xffc00000
-
-#define AT91_EBI 0xffe00000 /* External Bus Interface */
-#define AT91_SF 0xfff00000 /* Special Function */
-#define AT91_USART1 0xfffcc000 /* USART 1 */
-#define AT91_USART0 0xfffd0000 /* USART 0 */
-#define AT91_TC 0xfffe0000 /* Timer Counter */
-#define AT91_PIOA 0xffff0000 /* PIO Controller A */
-#define AT91_PS 0xffff4000 /* Power Save */
-#define AT91_WD 0xffff8000 /* Watchdog Timer */
-
-/*
- * The AT91x40 series doesn't have a debug unit like the other AT91 parts.
- * But it does have a chip identify register and extension ID, so define at
- * least these here.
- */
-#define AT91_DBGU_CIDR (AT91_SF + 0) /* CIDR in PS segment */
-#define AT91_DBGU_EXID (AT91_SF + 4) /* EXID in PS segment */
-
-/*
- * Support defines for the simple Power Controller module.
- */
-#define AT91_PS_CR (AT91_PS + 0) /* PS Control register */
-#define AT91_PS_CR_CPU (1 << 0) /* CPU clock disable bit */
-
-#define AT91X40_MASTER_CLOCK 40000000
-
-#endif /* AT91X40_H */
+++ /dev/null
-#ifndef __MACH_ATMEL_MCI_H
-#define __MACH_ATMEL_MCI_H
-
-#include <linux/platform_data/dma-atmel.h>
-
-/**
- * struct mci_dma_data - DMA data for MCI interface
- */
-struct mci_dma_data {
- struct at_dma_slave sdata;
-};
-
-/* accessor macros */
-#define slave_data_ptr(s) (&(s)->sdata)
-#define find_slave_dev(s) ((s)->sdata.dma_dev)
-
-#endif /* __MACH_ATMEL_MCI_H */
#define ARCH_EXID_SAMA5D43 0x00000003
#define ARCH_EXID_SAMA5D44 0x00000004
-#define ARCH_FAMILY_AT91X92 0x09200000
#define ARCH_FAMILY_AT91SAM9 0x01900000
#define ARCH_FAMILY_AT91SAM9XE 0x02900000
/* sama5d4 */
#define AT91_BASE_DBGU2 0xfc069000
-#if defined(CONFIG_ARCH_AT91X40)
-#include <mach/at91x40.h>
-#else
#include <mach/at91rm9200.h>
#include <mach/at91sam9260.h>
#include <mach/at91sam9261.h>
*/
#define AT91_BASE_SYS 0xffffc000
-#endif
-
/*
* On sama5d4 there is no system controller, we map some needed peripherals
*/
* called as part of the generic suspend/resume path.
*/
#ifndef __ASSEMBLY__
-#ifdef CONFIG_PINCTRL_AT91
extern void at91_pinctrl_gpio_suspend(void);
extern void at91_pinctrl_gpio_resume(void);
-#else
-static inline void at91_pinctrl_gpio_suspend(void) {}
-static inline void at91_pinctrl_gpio_resume(void) {}
-#endif
#endif
#endif
void __iomem *at91_uart;
-#if !defined(CONFIG_ARCH_AT91X40)
static const u32 uarts_rm9200[] = {
AT91_BASE_DBGU0,
AT91RM9200_BASE_US0,
at91_uart = NULL;
}
-#else
-static inline void arch_decomp_setup(void)
-{
- at91_uart = NULL;
-}
-#endif
/*
* The following code assumes the serial port has already been
+++ /dev/null
-/*
- * linux/arch/arm/mach-at91/irq.c
- *
- * Copyright (C) 2004 SAN People
- * Copyright (C) 2004 ATMEL
- * Copyright (C) Rick Bronson
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/mm.h>
-#include <linux/bitmap.h>
-#include <linux/types.h>
-#include <linux/irq.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/irqdomain.h>
-#include <linux/err.h>
-#include <linux/slab.h>
-
-#include <mach/hardware.h>
-#include <asm/irq.h>
-#include <asm/setup.h>
-
-#include <asm/exception.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/irq.h>
-#include <asm/mach/map.h>
-
-#include "at91_aic.h"
-
-void __iomem *at91_aic_base;
-static struct irq_domain *at91_aic_domain;
-static struct device_node *at91_aic_np;
-static unsigned int n_irqs = NR_AIC_IRQS;
-
-#ifdef CONFIG_PM
-
-static unsigned long *wakeups;
-static unsigned long *backups;
-
-#define set_backup(bit) set_bit(bit, backups)
-#define clear_backup(bit) clear_bit(bit, backups)
-
-static int at91_aic_pm_init(void)
-{
- backups = kzalloc(BITS_TO_LONGS(n_irqs) * sizeof(*backups), GFP_KERNEL);
- if (!backups)
- return -ENOMEM;
-
- wakeups = kzalloc(BITS_TO_LONGS(n_irqs) * sizeof(*backups), GFP_KERNEL);
- if (!wakeups) {
- kfree(backups);
- return -ENOMEM;
- }
-
- return 0;
-}
-
-static int at91_aic_set_wake(struct irq_data *d, unsigned value)
-{
- if (unlikely(d->hwirq >= n_irqs))
- return -EINVAL;
-
- if (value)
- set_bit(d->hwirq, wakeups);
- else
- clear_bit(d->hwirq, wakeups);
-
- return 0;
-}
-
-void at91_irq_suspend(void)
-{
- at91_aic_write(AT91_AIC_IDCR, *backups);
- at91_aic_write(AT91_AIC_IECR, *wakeups);
-}
-
-void at91_irq_resume(void)
-{
- at91_aic_write(AT91_AIC_IDCR, *wakeups);
- at91_aic_write(AT91_AIC_IECR, *backups);
-}
-
-#else
-static inline int at91_aic_pm_init(void)
-{
- return 0;
-}
-
-#define set_backup(bit)
-#define clear_backup(bit)
-#define at91_aic_set_wake NULL
-
-#endif /* CONFIG_PM */
-
-asmlinkage void __exception_irq_entry
-at91_aic_handle_irq(struct pt_regs *regs)
-{
- u32 irqnr;
- u32 irqstat;
-
- irqnr = at91_aic_read(AT91_AIC_IVR);
- irqstat = at91_aic_read(AT91_AIC_ISR);
-
- /*
- * ISR value is 0 when there is no current interrupt or when there is
- * a spurious interrupt
- */
- if (!irqstat)
- at91_aic_write(AT91_AIC_EOICR, 0);
- else
- handle_IRQ(irqnr, regs);
-}
-
-static void at91_aic_mask_irq(struct irq_data *d)
-{
- /* Disable interrupt on AIC */
- at91_aic_write(AT91_AIC_IDCR, 1 << d->hwirq);
- /* Update ISR cache */
- clear_backup(d->hwirq);
-}
-
-static void at91_aic_unmask_irq(struct irq_data *d)
-{
- /* Enable interrupt on AIC */
- at91_aic_write(AT91_AIC_IECR, 1 << d->hwirq);
- /* Update ISR cache */
- set_backup(d->hwirq);
-}
-
-static void at91_aic_eoi(struct irq_data *d)
-{
- /*
- * Mark end-of-interrupt on AIC, the controller doesn't care about
- * the value written. Moreover it's a write-only register.
- */
- at91_aic_write(AT91_AIC_EOICR, 0);
-}
-
-static unsigned long *at91_extern_irq;
-
-u32 at91_get_extern_irq(void)
-{
- if (!at91_extern_irq)
- return 0;
- return *at91_extern_irq;
-}
-
-#define is_extern_irq(hwirq) test_bit(hwirq, at91_extern_irq)
-
-static int at91_aic_compute_srctype(struct irq_data *d, unsigned type)
-{
- int srctype;
-
- switch (type) {
- case IRQ_TYPE_LEVEL_HIGH:
- srctype = AT91_AIC_SRCTYPE_HIGH;
- break;
- case IRQ_TYPE_EDGE_RISING:
- srctype = AT91_AIC_SRCTYPE_RISING;
- break;
- case IRQ_TYPE_LEVEL_LOW:
- if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq)) /* only supported on external interrupts */
- srctype = AT91_AIC_SRCTYPE_LOW;
- else
- srctype = -EINVAL;
- break;
- case IRQ_TYPE_EDGE_FALLING:
- if ((d->hwirq == AT91_ID_FIQ) || is_extern_irq(d->hwirq)) /* only supported on external interrupts */
- srctype = AT91_AIC_SRCTYPE_FALLING;
- else
- srctype = -EINVAL;
- break;
- default:
- srctype = -EINVAL;
- }
-
- return srctype;
-}
-
-static int at91_aic_set_type(struct irq_data *d, unsigned type)
-{
- unsigned int smr;
- int srctype;
-
- srctype = at91_aic_compute_srctype(d, type);
- if (srctype < 0)
- return srctype;
-
- smr = at91_aic_read(AT91_AIC_SMR(d->hwirq)) & ~AT91_AIC_SRCTYPE;
- at91_aic_write(AT91_AIC_SMR(d->hwirq), smr | srctype);
-
- return 0;
-}
-
-static struct irq_chip at91_aic_chip = {
- .name = "AIC",
- .irq_mask = at91_aic_mask_irq,
- .irq_unmask = at91_aic_unmask_irq,
- .irq_set_type = at91_aic_set_type,
- .irq_set_wake = at91_aic_set_wake,
- .irq_eoi = at91_aic_eoi,
-};
-
-static void __init at91_aic_hw_init(unsigned int spu_vector)
-{
- int i;
-
- /*
- * Perform 8 End Of Interrupt Command to make sure AIC
- * will not Lock out nIRQ
- */
- for (i = 0; i < 8; i++)
- at91_aic_write(AT91_AIC_EOICR, 0);
-
- /*
- * Spurious Interrupt ID in Spurious Vector Register.
- * When there is no current interrupt, the IRQ Vector Register
- * reads the value stored in AIC_SPU
- */
- at91_aic_write(AT91_AIC_SPU, spu_vector);
-
- /* No debugging in AIC: Debug (Protect) Control Register */
- at91_aic_write(AT91_AIC_DCR, 0);
-
- /* Disable and clear all interrupts initially */
- at91_aic_write(AT91_AIC_IDCR, 0xFFFFFFFF);
- at91_aic_write(AT91_AIC_ICCR, 0xFFFFFFFF);
-}
-
-/*
- * Initialize the AIC interrupt controller.
- */
-void __init at91_aic_init(unsigned int *priority, unsigned int ext_irq_mask)
-{
- unsigned int i;
- int irq_base;
-
- at91_extern_irq = kzalloc(BITS_TO_LONGS(n_irqs)
- * sizeof(*at91_extern_irq), GFP_KERNEL);
-
- if (at91_aic_pm_init() || at91_extern_irq == NULL)
- panic("Unable to allocate bit maps\n");
-
- *at91_extern_irq = ext_irq_mask;
-
- at91_aic_base = ioremap(AT91_AIC, 512);
- if (!at91_aic_base)
- panic("Unable to ioremap AIC registers\n");
-
- /* Add irq domain for AIC */
- irq_base = irq_alloc_descs(-1, 0, n_irqs, 0);
- if (irq_base < 0) {
- WARN(1, "Cannot allocate irq_descs, assuming pre-allocated\n");
- irq_base = 0;
- }
- at91_aic_domain = irq_domain_add_legacy(at91_aic_np, n_irqs,
- irq_base, 0,
- &irq_domain_simple_ops, NULL);
-
- if (!at91_aic_domain)
- panic("Unable to add AIC irq domain\n");
-
- irq_set_default_host(at91_aic_domain);
-
- /*
- * The IVR is used by macro get_irqnr_and_base to read and verify.
- * The irq number is NR_AIC_IRQS when a spurious interrupt has occurred.
- */
- for (i = 0; i < n_irqs; i++) {
- /* Put hardware irq number in Source Vector Register: */
- at91_aic_write(AT91_AIC_SVR(i), NR_IRQS_LEGACY + i);
- /* Active Low interrupt, with the specified priority */
- at91_aic_write(AT91_AIC_SMR(i), AT91_AIC_SRCTYPE_LOW | priority[i]);
- irq_set_chip_and_handler(NR_IRQS_LEGACY + i, &at91_aic_chip, handle_fasteoi_irq);
- set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
- }
-
- at91_aic_hw_init(n_irqs);
-}
+++ /dev/null
-/*
- * LED driver for Atmel AT91-based boards.
- *
- * Copyright (C) SAN People (Pty) Ltd
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
-*/
-
-#include <linux/gpio.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-
-#include "board.h"
-#include "gpio.h"
-
-
-/* ------------------------------------------------------------------------- */
-
-#if defined(CONFIG_NEW_LEDS)
-
-/*
- * New cross-platform LED support.
- */
-
-static struct gpio_led_platform_data led_data;
-
-static struct platform_device at91_gpio_leds_device = {
- .name = "leds-gpio",
- .id = -1,
- .dev.platform_data = &led_data,
-};
-
-void __init at91_gpio_leds(struct gpio_led *leds, int nr)
-{
- int i;
-
- if (!nr)
- return;
-
- for (i = 0; i < nr; i++)
- at91_set_gpio_output(leds[i].gpio, leds[i].active_low);
-
- led_data.leds = leds;
- led_data.num_leds = nr;
- platform_device_register(&at91_gpio_leds_device);
-}
-
-#else
-void __init at91_gpio_leds(struct gpio_led *leds, int nr) {}
-#endif
-
#include <mach/cpu.h>
#include <mach/hardware.h>
-#include "at91_aic.h"
#include "generic.h"
#include "pm.h"
-#include "gpio.h"
static void (*at91_pm_standby)(void);
static int at91_pm_enter(suspend_state_t state)
{
- if (of_have_populated_dt())
- at91_pinctrl_gpio_suspend();
- else
- at91_gpio_suspend();
-
- if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && at91_aic_base) {
- at91_irq_suspend();
-
- pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
- /* remember all the always-wake irqs */
- (at91_pmc_read(AT91_PMC_PCSR)
- | (1 << AT91_ID_FIQ)
- | (1 << AT91_ID_SYS)
- | (at91_get_extern_irq()))
- & at91_aic_read(AT91_AIC_IMR),
- state);
- }
+ at91_pinctrl_gpio_suspend();
switch (state) {
/*
goto error;
}
- if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && at91_aic_base)
- pr_debug("AT91: PM - wakeup %08x\n",
- at91_aic_read(AT91_AIC_IPR) &
- at91_aic_read(AT91_AIC_IMR));
-
error:
target_state = PM_SUSPEND_ON;
- if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && at91_aic_base)
- at91_irq_resume();
-
- if (of_have_populated_dt())
- at91_pinctrl_gpio_resume();
- else
- at91_gpio_resume();
+ at91_pinctrl_gpio_resume();
return 0;
}
#include <asm/proc-fns.h>
#include <mach/at91_ramc.h>
-#include <mach/at91rm9200_sdramc.h>
#ifdef CONFIG_PM
extern void at91_pm_set_standby(void (*at91_standby)(void));
at91_get_soc_subtype(&at91_soc_initdata));
}
-void __init at91_init_irq_default(void)
-{
- at91_init_interrupts(at91_boot_soc.default_irq_priority);
-}
-
-void __init at91_init_interrupts(unsigned int *priority)
-{
- /* Initialize the AIC interrupt controller */
- if (IS_ENABLED(CONFIG_OLD_IRQ_AT91))
- at91_aic_init(priority, at91_boot_soc.extern_irq);
-
- /* Enable GPIO interrupts */
- at91_gpio_irq_setup();
-}
-
void __iomem *at91_ramc_base[2];
EXPORT_SYMBOL_GPL(at91_ramc_base);
-void __init at91_ioremap_ramc(int id, u32 addr, u32 size)
-{
- if (id < 0 || id > 1) {
- pr_emerg("Wrong RAM controller id (%d), cannot continue\n", id);
- BUG();
- }
- at91_ramc_base[id] = ioremap(addr, size);
- if (!at91_ramc_base[id])
- panic(pr_fmt("Impossible to ioremap ramc.%d 0x%x\n"), id, addr);
-}
-
static struct map_desc sram_desc[2] __initdata;
void __init at91_init_sram(int bank, unsigned long base, unsigned int length)
panic(pr_fmt("Impossible to ioremap at91_matrix_base\n"));
}
-#if defined(CONFIG_OF) && !defined(CONFIG_ARCH_AT91X40)
static struct of_device_id ramc_ids[] = {
{ .compatible = "atmel,at91rm9200-sdramc", .data = at91rm9200_standby },
{ .compatible = "atmel,at91sam9260-sdramc", .data = at91sam9_sdram_standby },
{
at91_dt_ramc();
- /* Init clock subsystem */
- at91_dt_clock_init();
-
- /* Register the processor-specific clocks */
- if (at91_boot_soc.register_clocks)
- at91_boot_soc.register_clocks();
-
at91_boot_soc.init();
}
{
at91_dt_ramc();
- /* Init clock subsystem */
- at91_dt_clock_init();
-
- /* Register the processor-specific clocks */
- if (at91_boot_soc.register_clocks)
- at91_boot_soc.register_clocks();
-
if (at91_boot_soc.init)
at91_boot_soc.init();
}
-#endif
-
-void __init at91_initialize(unsigned long main_clock)
-{
- at91_boot_soc.ioremap_registers();
-
- /* Init clock subsystem */
- at91_clock_init(main_clock);
-
- /* Register the processor-specific clocks */
- at91_boot_soc.register_clocks();
-
- at91_boot_soc.init();
-
- pinctrl_provide_dummies();
-}
-
-void __init at91_register_devices(void)
-{
- at91_boot_soc.register_devices();
-}
-
-void __init at91_init_time(void)
-{
- at91_boot_soc.init_time();
-}
struct at91_init_soc {
int builtin;
- u32 extern_irq;
- unsigned int *default_irq_priority;
void (*map_io)(void);
- void (*ioremap_registers)(void);
- void (*register_clocks)(void);
- void (*register_devices)(void);
void (*init)(void);
- void (*init_time)(void);
};
extern struct at91_init_soc at91_boot_soc;
+++ /dev/null
-#ifndef __MACH_STAMP9G20_H
-#define __MACH_STAMP9G20_H
-
-void stamp9g20_init_early(void);
-void stamp9g20_board_init(void);
-
-#endif
if ARCH_BCM
+comment "IPROC architected SoCs"
+
+config ARCH_BCM_IPROC
+ bool
+ select ARM_GIC
+ select CACHE_L2X0
+ select HAVE_ARM_SCU if SMP
+ select HAVE_ARM_TWD if SMP
+ select ARM_GLOBAL_TIMER
+
+ select CLKSRC_MMIO
+ select ARCH_REQUIRE_GPIOLIB
+ select ARM_AMBA
+ select PINCTRL
+ help
+ This enables support for systems based on Broadcom IPROC architected SoCs.
+ The IPROC complex contains one or more ARM CPUs along with common
+ core periperals. Application specific SoCs are created by adding a
+ uArchitecture containing peripherals outside of the IPROC complex.
+ Currently supported SoCs are Cygnus.
+
+config ARCH_BCM_CYGNUS
+ bool "Broadcom Cygnus Support" if ARCH_MULTI_V7
+ select ARCH_BCM_IPROC
+ help
+ Enable support for the Cygnus family,
+ which includes the following variants:
+ BCM11300, BCM11320, BCM11350, BCM11360,
+ BCM58300, BCM58302, BCM58303, BCM58305.
+
+config ARCH_BCM_5301X
+ bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
+ select ARCH_BCM_IPROC
+ help
+ Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
+
+ This is a network SoC line mostly used in home routers and
+ wifi access points, it's internal name is Northstar.
+ This inclused the following SoC: BCM53010, BCM53011, BCM53012,
+ BCM53014, BCM53015, BCM53016, BCM53017, BCM53018, BCM4707,
+ BCM4708 and BCM4709.
+
+ Do not confuse this with the BCM4760 which is a totally
+ different SoC or with the older BCM47XX and BCM53XX based
+ network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx
+
+comment "KONA architected SoCs"
+
config ARCH_BCM_MOBILE
- bool "Broadcom Mobile SoC Support" if ARCH_MULTI_V7
+ bool
select ARCH_REQUIRE_GPIOLIB
select ARM_ERRATA_754322
select ARM_ERRATA_775420
select TICK_ONESHOT
select HAVE_ARM_ARCH_TIMER
select PINCTRL
+ select ARCH_BCM_MOBILE_SMP if SMP
help
This enables support for systems based on Broadcom mobile SoCs.
-if ARCH_BCM_MOBILE
-
-menu "Broadcom Mobile SoC Selection"
-
config ARCH_BCM_281XX
bool "Broadcom BCM281XX SoC family"
- default y
+ select ARCH_BCM_MOBILE
select HAVE_SMP
help
Enable support for the BCM281XX family, which includes
config ARCH_BCM_21664
bool "Broadcom BCM21664 SoC family"
- default y
+ select ARCH_BCM_MOBILE
select HAVE_SMP
help
Enable support for the BCM21664 family, which includes
config ARCH_BCM_MOBILE_L2_CACHE
bool "Broadcom mobile SoC level 2 cache support"
- depends on (ARCH_BCM_281XX || ARCH_BCM_21664)
+ depends on ARCH_BCM_MOBILE
default y
select CACHE_L2X0
select ARCH_BCM_MOBILE_SMC
config ARCH_BCM_MOBILE_SMC
bool
- depends on ARCH_BCM_281XX || ARCH_BCM_21664
+ depends on ARCH_BCM_MOBILE
config ARCH_BCM_MOBILE_SMP
- bool "Broadcom mobile SoC SMP support"
- depends on (ARCH_BCM_281XX || ARCH_BCM_21664) && SMP
- default y
+ bool
+ depends on ARCH_BCM_MOBILE
select HAVE_ARM_SCU
select ARM_ERRATA_764369
help
Provided as an option so SMP support for SoCs of this type
can be disabled for an SMP-enabled kernel.
-endmenu
-
-endif
+comment "Other Architectures"
config ARCH_BCM2835
bool "Broadcom BCM2835 family" if ARCH_MULTI_V6
This enables support for the Broadcom BCM2835 SoC. This SoC is
used in the Raspberry Pi and Roku 2 devices.
-config ARCH_BCM_5301X
- bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
- select ARM_GIC
- select CACHE_L2X0
- select HAVE_ARM_SCU if SMP
- select HAVE_ARM_TWD if SMP
- select ARM_GLOBAL_TIMER
- select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
- help
- Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
-
- This is a network SoC line mostly used in home routers and
- wifi access points, it's internal name is Northstar.
- This inclused the following SoC: BCM53010, BCM53011, BCM53012,
- BCM53014, BCM53015, BCM53016, BCM53017, BCM53018, BCM4707,
- BCM4708 and BCM4709.
-
- Do not confuse this with the BCM4760 which is a totally
- different SoC or with the older BCM47XX and BCM53XX based
- network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx
-
config ARCH_BCM_63XX
bool "Broadcom BCM63xx DSL SoC" if ARCH_MULTI_V7
depends on MMU
config ARCH_BRCMSTB
bool "Broadcom BCM7XXX based boards" if ARCH_MULTI_V7
- depends on MMU
select ARM_GIC
- select MIGHT_HAVE_PCI
- select HAVE_SMP
select HAVE_ARM_ARCH_TIMER
select BRCMSTB_GISB_ARB
select BRCMSTB_L2_IRQ
# of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
+# Cygnus
+obj-$(CONFIG_ARCH_BCM_CYGNUS) += bcm_cygnus.o
+
# BCM281XX
obj-$(CONFIG_ARCH_BCM_281XX) += board_bcm281xx.o
obj-$(CONFIG_ARCH_BCM_63XX) := bcm63xx.o
ifeq ($(CONFIG_ARCH_BRCMSTB),y)
+CFLAGS_platsmp-brcmstb.o += -march=armv7-a
obj-y += brcmstb.o
+obj-$(CONFIG_SMP) += headsmp-brcmstb.o platsmp-brcmstb.o
endif
--- /dev/null
+/*
+ * Copyright (C) 2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/mach/arch.h>
+
+static const char const *bcm_cygnus_dt_compat[] = {
+ "brcm,cygnus",
+ NULL,
+};
+
+DT_MACHINE_START(BCM_CYGNUS_DT, "Broadcom Cygnus SoC")
+ .l2c_aux_val = 0,
+ .l2c_aux_mask = ~0,
+ .dt_compat = bcm_cygnus_dt_compat,
+MACHINE_END
--- /dev/null
+/*
+ * Copyright (C) 2013-2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __BRCMSTB_H__
+#define __BRCMSTB_H__
+
+void brcmstb_secondary_startup(void);
+
+#endif /* __BRCMSTB_H__ */
--- /dev/null
+/*
+ * SMP boot code for secondary CPUs
+ * Based on arch/arm/mach-tegra/headsmp.S
+ *
+ * Copyright (C) 2010 NVIDIA, Inc.
+ * Copyright (C) 2013-2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/assembler.h>
+#include <linux/linkage.h>
+#include <linux/init.h>
+
+ .section ".text.head", "ax"
+
+ENTRY(brcmstb_secondary_startup)
+ /*
+ * Ensure CPU is in a sane state by disabling all IRQs and switching
+ * into SVC mode.
+ */
+ setmode PSR_I_BIT | PSR_F_BIT | SVC_MODE, r0
+
+ bl v7_invalidate_l1
+ b secondary_startup
+ENDPROC(brcmstb_secondary_startup)
--- /dev/null
+/*
+ * Broadcom STB CPU SMP and hotplug support for ARM
+ *
+ * Copyright (C) 2013-2014 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/printk.h>
+#include <linux/regmap.h>
+#include <linux/smp.h>
+#include <linux/mfd/syscon.h>
+
+#include <asm/cacheflush.h>
+#include <asm/cp15.h>
+#include <asm/mach-types.h>
+#include <asm/smp_plat.h>
+
+#include "brcmstb.h"
+
+enum {
+ ZONE_MAN_CLKEN_MASK = BIT(0),
+ ZONE_MAN_RESET_CNTL_MASK = BIT(1),
+ ZONE_MAN_MEM_PWR_MASK = BIT(4),
+ ZONE_RESERVED_1_MASK = BIT(5),
+ ZONE_MAN_ISO_CNTL_MASK = BIT(6),
+ ZONE_MANUAL_CONTROL_MASK = BIT(7),
+ ZONE_PWR_DN_REQ_MASK = BIT(9),
+ ZONE_PWR_UP_REQ_MASK = BIT(10),
+ ZONE_BLK_RST_ASSERT_MASK = BIT(12),
+ ZONE_PWR_OFF_STATE_MASK = BIT(25),
+ ZONE_PWR_ON_STATE_MASK = BIT(26),
+ ZONE_DPG_PWR_STATE_MASK = BIT(28),
+ ZONE_MEM_PWR_STATE_MASK = BIT(29),
+ ZONE_RESET_STATE_MASK = BIT(31),
+ CPU0_PWR_ZONE_CTRL_REG = 1,
+ CPU_RESET_CONFIG_REG = 2,
+};
+
+static void __iomem *cpubiuctrl_block;
+static void __iomem *hif_cont_block;
+static u32 cpu0_pwr_zone_ctrl_reg;
+static u32 cpu_rst_cfg_reg;
+static u32 hif_cont_reg;
+
+#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * We must quiesce a dying CPU before it can be killed by the boot CPU. Because
+ * one or more cache may be disabled, we must flush to ensure coherency. We
+ * cannot use traditionl completion structures or spinlocks as they rely on
+ * coherency.
+ */
+static DEFINE_PER_CPU_ALIGNED(int, per_cpu_sw_state);
+
+static int per_cpu_sw_state_rd(u32 cpu)
+{
+ sync_cache_r(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu)));
+ return per_cpu(per_cpu_sw_state, cpu);
+}
+
+static void per_cpu_sw_state_wr(u32 cpu, int val)
+{
+ dmb();
+ per_cpu(per_cpu_sw_state, cpu) = val;
+ sync_cache_w(SHIFT_PERCPU_PTR(&per_cpu_sw_state, per_cpu_offset(cpu)));
+}
+#else
+static inline void per_cpu_sw_state_wr(u32 cpu, int val) { }
+#endif
+
+static void __iomem *pwr_ctrl_get_base(u32 cpu)
+{
+ void __iomem *base = cpubiuctrl_block + cpu0_pwr_zone_ctrl_reg;
+ base += (cpu_logical_map(cpu) * 4);
+ return base;
+}
+
+static u32 pwr_ctrl_rd(u32 cpu)
+{
+ void __iomem *base = pwr_ctrl_get_base(cpu);
+ return readl_relaxed(base);
+}
+
+static void pwr_ctrl_wr(u32 cpu, u32 val)
+{
+ void __iomem *base = pwr_ctrl_get_base(cpu);
+ writel(val, base);
+}
+
+static void cpu_rst_cfg_set(u32 cpu, int set)
+{
+ u32 val;
+ val = readl_relaxed(cpubiuctrl_block + cpu_rst_cfg_reg);
+ if (set)
+ val |= BIT(cpu_logical_map(cpu));
+ else
+ val &= ~BIT(cpu_logical_map(cpu));
+ writel_relaxed(val, cpubiuctrl_block + cpu_rst_cfg_reg);
+}
+
+static void cpu_set_boot_addr(u32 cpu, unsigned long boot_addr)
+{
+ const int reg_ofs = cpu_logical_map(cpu) * 8;
+ writel_relaxed(0, hif_cont_block + hif_cont_reg + reg_ofs);
+ writel_relaxed(boot_addr, hif_cont_block + hif_cont_reg + 4 + reg_ofs);
+}
+
+static void brcmstb_cpu_boot(u32 cpu)
+{
+ /* Mark this CPU as "up" */
+ per_cpu_sw_state_wr(cpu, 1);
+
+ /*
+ * Set the reset vector to point to the secondary_startup
+ * routine
+ */
+ cpu_set_boot_addr(cpu, virt_to_phys(brcmstb_secondary_startup));
+
+ /* Unhalt the cpu */
+ cpu_rst_cfg_set(cpu, 0);
+}
+
+static void brcmstb_cpu_power_on(u32 cpu)
+{
+ /*
+ * The secondary cores power was cut, so we must go through
+ * power-on initialization.
+ */
+ u32 tmp;
+
+ /* Request zone power up */
+ pwr_ctrl_wr(cpu, ZONE_PWR_UP_REQ_MASK);
+
+ /* Wait for the power up FSM to complete */
+ do {
+ tmp = pwr_ctrl_rd(cpu);
+ } while (!(tmp & ZONE_PWR_ON_STATE_MASK));
+}
+
+static int brcmstb_cpu_get_power_state(u32 cpu)
+{
+ int tmp = pwr_ctrl_rd(cpu);
+ return (tmp & ZONE_RESET_STATE_MASK) ? 0 : 1;
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+
+static void brcmstb_cpu_die(u32 cpu)
+{
+ v7_exit_coherency_flush(all);
+
+ per_cpu_sw_state_wr(cpu, 0);
+
+ /* Sit and wait to die */
+ wfi();
+
+ /* We should never get here... */
+ while (1)
+ ;
+}
+
+static int brcmstb_cpu_kill(u32 cpu)
+{
+ u32 tmp;
+
+ while (per_cpu_sw_state_rd(cpu))
+ ;
+
+ /* Program zone reset */
+ pwr_ctrl_wr(cpu, ZONE_RESET_STATE_MASK | ZONE_BLK_RST_ASSERT_MASK |
+ ZONE_PWR_DN_REQ_MASK);
+
+ /* Verify zone reset */
+ tmp = pwr_ctrl_rd(cpu);
+ if (!(tmp & ZONE_RESET_STATE_MASK))
+ pr_err("%s: Zone reset bit for CPU %d not asserted!\n",
+ __func__, cpu);
+
+ /* Wait for power down */
+ do {
+ tmp = pwr_ctrl_rd(cpu);
+ } while (!(tmp & ZONE_PWR_OFF_STATE_MASK));
+
+ /* Flush pipeline before resetting CPU */
+ mb();
+
+ /* Assert reset on the CPU */
+ cpu_rst_cfg_set(cpu, 1);
+
+ return 1;
+}
+
+#endif /* CONFIG_HOTPLUG_CPU */
+
+static int __init setup_hifcpubiuctrl_regs(struct device_node *np)
+{
+ int rc = 0;
+ char *name;
+ struct device_node *syscon_np = NULL;
+
+ name = "syscon-cpu";
+
+ syscon_np = of_parse_phandle(np, name, 0);
+ if (!syscon_np) {
+ pr_err("can't find phandle %s\n", name);
+ rc = -EINVAL;
+ goto cleanup;
+ }
+
+ cpubiuctrl_block = of_iomap(syscon_np, 0);
+ if (!cpubiuctrl_block) {
+ pr_err("iomap failed for cpubiuctrl_block\n");
+ rc = -EINVAL;
+ goto cleanup;
+ }
+
+ rc = of_property_read_u32_index(np, name, CPU0_PWR_ZONE_CTRL_REG,
+ &cpu0_pwr_zone_ctrl_reg);
+ if (rc) {
+ pr_err("failed to read 1st entry from %s property (%d)\n", name,
+ rc);
+ rc = -EINVAL;
+ goto cleanup;
+ }
+
+ rc = of_property_read_u32_index(np, name, CPU_RESET_CONFIG_REG,
+ &cpu_rst_cfg_reg);
+ if (rc) {
+ pr_err("failed to read 2nd entry from %s property (%d)\n", name,
+ rc);
+ rc = -EINVAL;
+ goto cleanup;
+ }
+
+cleanup:
+ of_node_put(syscon_np);
+ return rc;
+}
+
+static int __init setup_hifcont_regs(struct device_node *np)
+{
+ int rc = 0;
+ char *name;
+ struct device_node *syscon_np = NULL;
+
+ name = "syscon-cont";
+
+ syscon_np = of_parse_phandle(np, name, 0);
+ if (!syscon_np) {
+ pr_err("can't find phandle %s\n", name);
+ rc = -EINVAL;
+ goto cleanup;
+ }
+
+ hif_cont_block = of_iomap(syscon_np, 0);
+ if (!hif_cont_block) {
+ pr_err("iomap failed for hif_cont_block\n");
+ rc = -EINVAL;
+ goto cleanup;
+ }
+
+ /* Offset is at top of hif_cont_block */
+ hif_cont_reg = 0;
+
+cleanup:
+ of_node_put(syscon_np);
+ return rc;
+}
+
+static void __init brcmstb_cpu_ctrl_setup(unsigned int max_cpus)
+{
+ int rc;
+ struct device_node *np;
+ char *name;
+
+ name = "brcm,brcmstb-smpboot";
+ np = of_find_compatible_node(NULL, NULL, name);
+ if (!np) {
+ pr_err("can't find compatible node %s\n", name);
+ return;
+ }
+
+ rc = setup_hifcpubiuctrl_regs(np);
+ if (rc)
+ return;
+
+ rc = setup_hifcont_regs(np);
+ if (rc)
+ return;
+}
+
+static int brcmstb_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ /* Missing the brcm,brcmstb-smpboot DT node? */
+ if (!cpubiuctrl_block || !hif_cont_block)
+ return -ENODEV;
+
+ /* Bring up power to the core if necessary */
+ if (brcmstb_cpu_get_power_state(cpu) == 0)
+ brcmstb_cpu_power_on(cpu);
+
+ brcmstb_cpu_boot(cpu);
+
+ return 0;
+}
+
+static struct smp_operations brcmstb_smp_ops __initdata = {
+ .smp_prepare_cpus = brcmstb_cpu_ctrl_setup,
+ .smp_boot_secondary = brcmstb_boot_secondary,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_kill = brcmstb_cpu_kill,
+ .cpu_die = brcmstb_cpu_die,
+#endif
+};
+
+CPU_METHOD_OF_DECLARE(brcmstb_smp, "brcm,brahma-b15", &brcmstb_smp_ops);
menuconfig ARCH_BERLIN
bool "Marvell Berlin SoCs" if ARCH_MULTI_V7
+ select ARCH_HAS_RESET_CONTROLLER
select ARCH_REQUIRE_GPIOLIB
select ARM_GIC
- select GENERIC_IRQ_CHIP
select DW_APB_ICTL
select DW_APB_TIMER_OF
+ select GENERIC_IRQ_CHIP
select PINCTRL
if ARCH_BERLIN
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING,
"OHCI over-current indicator", NULL);
if (error)
- printk(KERN_ERR "%s: could not request IRQ to watch "
- "over-current indicator changes\n", __func__);
+ pr_err("%s: could not request IRQ to watch over-current indicator changes\n",
+ __func__);
} else
free_irq(irq, NULL);
/* USB_REFCLKIN is not used. */
ret = davinci_cfg_reg(DA830_USB0_DRVVBUS);
if (ret)
- pr_warning("%s: USB 2.0 PinMux setup failed: %d\n",
- __func__, ret);
+ pr_warn("%s: USB 2.0 PinMux setup failed: %d\n", __func__, ret);
else {
/*
* TPS2065 switch @ 5V supplies 1 A (sustains 1.5 A),
*/
ret = da8xx_register_usb20(1000, 3);
if (ret)
- pr_warning("%s: USB 2.0 registration failed: %d\n",
- __func__, ret);
+ pr_warn("%s: USB 2.0 registration failed: %d\n",
+ __func__, ret);
}
ret = davinci_cfg_reg_list(da830_evm_usb11_pins);
if (ret) {
- pr_warning("%s: USB 1.1 PinMux setup failed: %d\n",
- __func__, ret);
+ pr_warn("%s: USB 1.1 PinMux setup failed: %d\n", __func__, ret);
return;
}
ret = gpio_request(ON_BD_USB_DRV, "ON_BD_USB_DRV");
if (ret) {
- printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port "
- "power control: %d\n", __func__, ret);
+ pr_err("%s: failed to request GPIO for USB 1.1 port power control: %d\n",
+ __func__, ret);
return;
}
gpio_direction_output(ON_BD_USB_DRV, 0);
ret = gpio_request(ON_BD_USB_OVC, "ON_BD_USB_OVC");
if (ret) {
- printk(KERN_ERR "%s: failed to request GPIO for USB 1.1 port "
- "over-current indicator: %d\n", __func__, ret);
+ pr_err("%s: failed to request GPIO for USB 1.1 port over-current indicator: %d\n",
+ __func__, ret);
return;
}
gpio_direction_input(ON_BD_USB_OVC);
ret = da8xx_register_usb11(&da830_evm_usb11_pdata);
if (ret)
- pr_warning("%s: USB 1.1 registration failed: %d\n",
- __func__, ret);
+ pr_warn("%s: USB 1.1 registration failed: %d\n", __func__, ret);
}
static const short da830_evm_mcasp1_pins[] = {
ret = davinci_cfg_reg_list(da830_evm_mmc_sd_pins);
if (ret) {
- pr_warning("da830_evm_init: mmc/sd mux setup failed: %d\n",
- ret);
+ pr_warn("%s: mmc/sd mux setup failed: %d\n", __func__, ret);
return;
}
ret = gpio_request(DA830_MMCSD_WP_PIN, "MMC WP");
if (ret) {
- pr_warning("da830_evm_init: can not open GPIO %d\n",
- DA830_MMCSD_WP_PIN);
+ pr_warn("%s: can not open GPIO %d\n",
+ __func__, DA830_MMCSD_WP_PIN);
return;
}
gpio_direction_input(DA830_MMCSD_WP_PIN);
ret = gpio_request(DA830_MMCSD_CD_PIN, "MMC CD\n");
if (ret) {
- pr_warning("da830_evm_init: can not open GPIO %d\n",
- DA830_MMCSD_CD_PIN);
+ pr_warn("%s: can not open GPIO %d\n",
+ __func__, DA830_MMCSD_CD_PIN);
return;
}
gpio_direction_input(DA830_MMCSD_CD_PIN);
ret = da8xx_register_mmcsd0(&da830_evm_mmc_config);
if (ret) {
- pr_warning("da830_evm_init: mmc/sd registration failed: %d\n",
- ret);
+ pr_warn("%s: mmc/sd registration failed: %d\n", __func__, ret);
gpio_free(DA830_MMCSD_WP_PIN);
}
}
int ret;
if (HAS_MMC) {
- pr_warning("WARNING: both MMC/SD and NAND are "
- "enabled, but they share AEMIF pins.\n"
- "\tDisable MMC/SD for NAND support.\n");
+ pr_warn("WARNING: both MMC/SD and NAND are enabled, but they share AEMIF pins\n"
+ "\tDisable MMC/SD for NAND support\n");
return;
}
ret = davinci_cfg_reg_list(da830_evm_emif25_pins);
if (ret)
- pr_warning("da830_evm_init: emif25 mux setup failed: %d\n",
- ret);
+ pr_warn("%s: emif25 mux setup failed: %d\n", __func__, ret);
ret = platform_device_register(&da830_evm_nand_device);
if (ret)
- pr_warning("da830_evm_init: NAND device not registered.\n");
+ pr_warn("%s: NAND device not registered\n", __func__);
if (davinci_aemif_setup(&da830_evm_nand_device))
- pr_warn("%s: Cannot configure AEMIF.\n", __func__);
+ pr_warn("%s: Cannot configure AEMIF\n", __func__);
gpio_direction_output(mux_mode, 1);
}
ret = davinci_cfg_reg_list(da830_lcdcntl_pins);
if (ret)
- pr_warning("da830_evm_init: lcdcntl mux setup failed: %d\n",
- ret);
+ pr_warn("%s: lcdcntl mux setup failed: %d\n", __func__, ret);
ret = da8xx_register_lcdc(&sharp_lcd035q3dg01_pdata);
if (ret)
- pr_warning("da830_evm_init: lcd setup failed: %d\n", ret);
+ pr_warn("%s: lcd setup failed: %d\n", __func__, ret);
gpio_direction_output(mux_mode, 0);
}
ret = da830_register_gpio();
if (ret)
- pr_warn("da830_evm_init: GPIO init failed: %d\n", ret);
+ pr_warn("%s: GPIO init failed: %d\n", __func__, ret);
ret = da830_register_edma(da830_edma_rsv);
if (ret)
- pr_warning("da830_evm_init: edma registration failed: %d\n",
- ret);
+ pr_warn("%s: edma registration failed: %d\n", __func__, ret);
ret = davinci_cfg_reg_list(da830_i2c0_pins);
if (ret)
- pr_warning("da830_evm_init: i2c0 mux setup failed: %d\n",
- ret);
+ pr_warn("%s: i2c0 mux setup failed: %d\n", __func__, ret);
ret = da8xx_register_i2c(0, &da830_evm_i2c_0_pdata);
if (ret)
- pr_warning("da830_evm_init: i2c0 registration failed: %d\n",
- ret);
+ pr_warn("%s: i2c0 registration failed: %d\n", __func__, ret);
da830_evm_usb_init();
ret = davinci_cfg_reg_list(da830_cpgmac_pins);
if (ret)
- pr_warning("da830_evm_init: cpgmac mux setup failed: %d\n",
- ret);
+ pr_warn("%s: cpgmac mux setup failed: %d\n", __func__, ret);
ret = da8xx_register_emac();
if (ret)
- pr_warning("da830_evm_init: emac registration failed: %d\n",
- ret);
+ pr_warn("%s: emac registration failed: %d\n", __func__, ret);
ret = da8xx_register_watchdog();
if (ret)
- pr_warning("da830_evm_init: watchdog registration failed: %d\n",
- ret);
+ pr_warn("%s: watchdog registration failed: %d\n",
+ __func__, ret);
davinci_serial_init(da8xx_serial_device);
i2c_register_board_info(1, da830_evm_i2c_devices,
ret = davinci_cfg_reg_list(da830_evm_mcasp1_pins);
if (ret)
- pr_warning("da830_evm_init: mcasp1 mux setup failed: %d\n",
- ret);
+ pr_warn("%s: mcasp1 mux setup failed: %d\n", __func__, ret);
da8xx_register_mcasp(1, &da830_evm_snd_data);
ret = da8xx_register_rtc();
if (ret)
- pr_warning("da830_evm_init: rtc setup failed: %d\n", ret);
+ pr_warn("%s: rtc setup failed: %d\n", __func__, ret);
ret = spi_register_board_info(da830evm_spi_info,
ARRAY_SIZE(da830evm_spi_info));
if (ret)
- pr_warn("%s: spi info registration failed: %d\n", __func__,
- ret);
+ pr_warn("%s: spi info registration failed: %d\n",
+ __func__, ret);
ret = da8xx_register_spi_bus(0, ARRAY_SIZE(da830evm_spi_info));
if (ret)
- pr_warning("da830_evm_init: spi 0 registration failed: %d\n",
- ret);
+ pr_warn("%s: spi 0 registration failed: %d\n", __func__, ret);
}
#ifdef CONFIG_SERIAL_8250_CONSOLE
for (i = 0; i < DA850_N_UI_PB; i++) {
button = &da850_evm_ui_keys[i];
button->code = KEY_F8 - i;
- button->desc = (char *)
- da850_evm_ui_exp[DA850_EVM_UI_EXP_PB8 + i];
+ button->desc = da850_evm_ui_exp[DA850_EVM_UI_EXP_PB8 + i];
button->gpio = gpio + DA850_EVM_UI_EXP_PB8 + i;
}
}
struct gpio_keys_button *button;
button = &da850_evm_bb_keys[0];
- button->desc = (char *)
- da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_PB1];
+ button->desc = da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_PB1];
button->gpio = gpio + DA850_EVM_BB_EXP_USER_PB1;
for (i = 0; i < DA850_N_BB_USER_SW; i++) {
button = &da850_evm_bb_keys[i + 1];
button->code = SW_LID + i;
- button->desc = (char *)
- da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_SW1 + i];
+ button->desc = da850_evm_bb_exp[DA850_EVM_BB_EXP_USER_SW1 + i];
button->gpio = gpio + DA850_EVM_BB_EXP_USER_SW1 + i;
}
}
if (HAS_ATA) {
if (HAS_NAND || HAS_NOR)
- pr_warning("WARNING: both IDE and Flash are "
- "enabled, but they share AEMIF pins.\n"
- "\tDisable IDE for NAND/NOR support.\n");
+ pr_warn("WARNING: both IDE and Flash are enabled, but they share AEMIF pins\n"
+ "\tDisable IDE for NAND/NOR support\n");
davinci_init_ide();
} else if (HAS_NAND || HAS_NOR) {
davinci_cfg_reg(DM644X_HPIEN_DISABLE);
platform_device_register(&davinci_evm_nandflash_device);
if (davinci_aemif_setup(&davinci_evm_nandflash_device))
- pr_warn("%s: Cannot configure AEMIF.\n",
+ pr_warn("%s: Cannot configure AEMIF\n",
__func__);
evm_leds[7].default_trigger = "nand-disk";
if (HAS_NOR)
- pr_warning("WARNING: both NAND and NOR flash "
- "are enabled; disable one of them.\n");
+ pr_warn("WARNING: both NAND and NOR flash are enabled; disable one of them.\n");
} else if (HAS_NOR)
platform_device_register(&davinci_evm_norflash_device);
}
* any kind, whether express or implied.
*/
+#define pr_fmt(fmt) "MityOMAPL138: " fmt
+
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/console.h>
ret = da850_register_cpufreq("pll0_sysclk3");
if (ret)
- pr_warning("cpufreq registration failed: %d\n", ret);
+ pr_warn("cpufreq registration failed: %d\n", ret);
}
#else
static void mityomapl138_cpufreq_init(const char *partnum) { }
ret = a->read(a, (char *)&factory_config, 0, sizeof(factory_config));
if (ret != sizeof(struct factory_config)) {
- pr_warning("MityOMAPL138: Read Factory Config Failed: %d\n",
- ret);
+ pr_warn("Read Factory Config Failed: %d\n", ret);
goto bad_config;
}
if (factory_config.magic != FACTORY_CONFIG_MAGIC) {
- pr_warning("MityOMAPL138: Factory Config Magic Wrong (%X)\n",
- factory_config.magic);
+ pr_warn("Factory Config Magic Wrong (%X)\n",
+ factory_config.magic);
goto bad_config;
}
if (factory_config.version != FACTORY_CONFIG_VERSION) {
- pr_warning("MityOMAPL138: Factory Config Version Wrong (%X)\n",
- factory_config.version);
+ pr_warn("Factory Config Version Wrong (%X)\n",
+ factory_config.version);
goto bad_config;
}
- pr_info("MityOMAPL138: Found MAC = %pM\n", factory_config.mac);
+ pr_info("Found MAC = %pM\n", factory_config.mac);
if (is_valid_ether_addr(factory_config.mac))
memcpy(soc_info->emac_pdata->mac_addr,
factory_config.mac, ETH_ALEN);
else
- pr_warning("MityOMAPL138: Invalid MAC found "
- "in factory config block\n");
+ pr_warn("Invalid MAC found in factory config block\n");
partnum = factory_config.partnum;
- pr_info("MityOMAPL138: Part Number = %s\n", partnum);
+ pr_info("Part Number = %s\n", partnum);
bad_config:
/* default maximum speed is valid for all platforms */
ARRAY_SIZE(mityomapl138_devices));
if (davinci_aemif_setup(&mityomapl138_nandflash_device))
- pr_warn("%s: Cannot configure AEMIF.\n", __func__);
+ pr_warn("%s: Cannot configure AEMIF\n", __func__);
}
static const short mityomap_mii_pins[] = {
}
if (ret) {
- pr_warning("mii/rmii mux setup failed: %d\n", ret);
+ pr_warn("mii/rmii mux setup failed: %d\n", ret);
return;
}
ret = da8xx_register_emac();
if (ret)
- pr_warning("emac registration failed: %d\n", ret);
+ pr_warn("emac registration failed: %d\n", ret);
}
static struct davinci_pm_config da850_pm_pdata = {
/* for now, no special EDMA channels are reserved */
ret = da850_register_edma(NULL);
if (ret)
- pr_warning("edma registration failed: %d\n", ret);
+ pr_warn("edma registration failed: %d\n", ret);
ret = da8xx_register_watchdog();
if (ret)
- pr_warning("watchdog registration failed: %d\n", ret);
+ pr_warn("watchdog registration failed: %d\n", ret);
davinci_serial_init(da8xx_serial_device);
ret = da8xx_register_i2c(0, &mityomap_i2c_0_pdata);
if (ret)
- pr_warning("i2c0 registration failed: %d\n", ret);
+ pr_warn("i2c0 registration failed: %d\n", ret);
ret = pmic_tps65023_init();
if (ret)
- pr_warning("TPS65023 PMIC init failed: %d\n", ret);
+ pr_warn("TPS65023 PMIC init failed: %d\n", ret);
mityomapl138_setup_nand();
ret = da8xx_register_spi_bus(1,
ARRAY_SIZE(mityomapl138_spi_flash_info));
if (ret)
- pr_warning("spi 1 registration failed: %d\n", ret);
+ pr_warn("spi 1 registration failed: %d\n", ret);
mityomapl138_config_emac();
ret = da8xx_register_rtc();
if (ret)
- pr_warning("rtc setup failed: %d\n", ret);
+ pr_warn("rtc setup failed: %d\n", ret);
ret = da8xx_register_cpuidle();
if (ret)
- pr_warning("cpuidle registration failed: %d\n", ret);
+ pr_warn("cpuidle registration failed: %d\n", ret);
ret = da850_register_pm(&da850_pm_device);
if (ret)
- pr_warning("da850_evm_init: suspend registration failed: %d\n",
- ret);
+ pr_warn("suspend registration failed: %d\n", ret);
}
#ifdef CONFIG_SERIAL_8250_CONSOLE
if (HAS_ATA) {
if (HAS_NAND)
- pr_warning("WARNING: both IDE and Flash are "
- "enabled, but they share AEMIF pins.\n"
- "\tDisable IDE for NAND/NOR support.\n");
+ pr_warn("WARNING: both IDE and Flash are enabled, but they share AEMIF pins\n"
+ "\tDisable IDE for NAND/NOR support\n");
davinci_init_ide();
} else if (HAS_NAND) {
davinci_cfg_reg(DM644X_HPIEN_DISABLE);
refclk = clk_get(NULL, "ref");
if (IS_ERR(refclk)) {
- pr_err("%s: failed to get reference clock.\n", __func__);
+ pr_err("%s: failed to get reference clock\n", __func__);
return PTR_ERR(refclk);
}
*
* Copyright (C) 2008 Texas Instruments.
*/
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/io.h>
#include <linux/module.h>
#include <linux/spinlock.h>
}
if (index >= soc_info->pinmux_pins_num) {
- printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
+ pr_err("Invalid pin mux index: %lu (%lu)\n",
index, soc_info->pinmux_pins_num);
dump_stack();
return -ENODEV;
cfg = &soc_info->pinmux_pins[index];
if (cfg->name == NULL) {
- printk(KERN_ERR "No entry for the specified index\n");
+ pr_err("No entry for the specified index\n");
return -ENODEV;
}
if (warn) {
#ifdef CONFIG_DAVINCI_MUX_WARNINGS
- printk(KERN_WARNING "MUX: initialized %s\n", cfg->name);
+ pr_warn("initialized %s\n", cfg->name);
#endif
}
#ifdef CONFIG_DAVINCI_MUX_DEBUG
if (cfg->debug || warn) {
- printk(KERN_WARNING "MUX: Setting register %s\n", cfg->name);
- printk(KERN_WARNING " %s (0x%08x) = 0x%08x -> 0x%08x\n",
- cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
+ pr_warn("Setting register %s\n", cfg->name);
+ pr_warn(" %s (0x%08x) = 0x%08x -> 0x%08x\n",
+ cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
}
#endif
struct davinci_soc_info *soc_info = &davinci_soc_info;
unsigned int clockevent_id;
unsigned int clocksource_id;
- static char err[] __initdata = KERN_ERR
- "%s: can't register clocksource!\n";
int i;
clockevent_id = soc_info->timer_info->clockevent_id;
/* Only bottom timers can use compare regs */
if (IS_TIMER_TOP(clockevent_id))
- pr_warning("davinci_timer_init: Invalid use"
- " of system timers. Results unpredictable.\n");
+ pr_warn("%s: Invalid use of system timers. Results unpredictable.\n",
+ __func__);
else if ((dtip[event_timer].cmp_off == 0)
|| (dtip[event_timer].cmp_irq == 0))
- pr_warning("davinci_timer_init: Invalid timer instance"
- " setup. Results unpredictable.\n");
+ pr_warn("%s: Invalid timer instance setup. Results unpredictable.\n",
+ __func__);
else {
timers[TID_CLOCKEVENT].opts |= TIMER_OPTS_USE_COMPARE;
clockevent_davinci.features = CLOCK_EVT_FEAT_ONESHOT;
clocksource_davinci.name = id_to_name[clocksource_id];
if (clocksource_register_hz(&clocksource_davinci,
davinci_clock_tick_rate))
- printk(err, clocksource_davinci.name);
+ pr_err("%s: can't register clocksource!\n",
+ clocksource_davinci.name);
sched_clock_register(davinci_read_sched_clock, 32,
davinci_clock_tick_rate);
u16 __readw(const volatile void __iomem *addr);
u32 __readl(const volatile void __iomem *addr);
-void __writeb(u8 val, void __iomem *addr);
-void __writew(u16 val, void __iomem *addr);
-void __writel(u32 val, void __iomem *addr);
+void __writeb(u8 val, volatile void __iomem *addr);
+void __writew(u16 val, volatile void __iomem *addr);
+void __writel(u32 val, volatile void __iomem *addr);
/*
* Argh, someone forgot the IOCS16 line. We therefore have to handle
#define writew(v,b) __writew(v,b)
#define writel(v,b) __writel(v,b)
+#define insb insb
extern void insb(unsigned int port, void *buf, int sz);
+#define insw insw
extern void insw(unsigned int port, void *buf, int sz);
+#define insl insl
extern void insl(unsigned int port, void *buf, int sz);
+#define outsb outsb
extern void outsb(unsigned int port, const void *buf, int sz);
+#define outsw outsw
extern void outsw(unsigned int port, const void *buf, int sz);
+#define outsl outsl
extern void outsl(unsigned int port, const void *buf, int sz);
/* can't support writesb atm */
-extern void writesw(void __iomem *addr, const void *data, int wordlen);
-extern void writesl(void __iomem *addr, const void *data, int longlen);
+#define writesw writesw
+extern void writesw(volatile void __iomem *addr, const void *data, int wordlen);
+#define writesl writesl
+extern void writesl(volatile void __iomem *addr, const void *data, int longlen);
/* can't support readsb atm */
-extern void readsw(const void __iomem *addr, void *data, int wordlen);
-extern void readsl(const void __iomem *addr, void *data, int longlen);
+#define readsw readsw
+extern void readsw(const volatile void __iomem *addr, void *data, int wordlen);
+
+#define readsl readsl
+extern void readsl(const volatile void __iomem *addr, void *data, int longlen);
#endif
EXPORT_SYMBOL(__readw);
EXPORT_SYMBOL(__readl);
-void readsw(const void __iomem *addr, void *data, int len)
+void readsw(const volatile void __iomem *addr, void *data, int len)
{
void __iomem *a = __isamem_convert_addr(addr);
}
EXPORT_SYMBOL(readsw);
-void readsl(const void __iomem *addr, void *data, int len)
+void readsl(const volatile void __iomem *addr, void *data, int len)
{
void __iomem *a = __isamem_convert_addr(addr);
}
EXPORT_SYMBOL(readsl);
-void __writeb(u8 val, void __iomem *addr)
+void __writeb(u8 val, volatile void __iomem *addr)
{
void __iomem *a = __isamem_convert_addr(addr);
__raw_writeb(val, a);
}
-void __writew(u16 val, void __iomem *addr)
+void __writew(u16 val, volatile void __iomem *addr)
{
void __iomem *a = __isamem_convert_addr(addr);
__raw_writew(val, a);
}
-void __writel(u32 val, void __iomem *addr)
+void __writel(u32 val, volatile void __iomem *addr)
{
void __iomem *a = __isamem_convert_addr(addr);
EXPORT_SYMBOL(__writew);
EXPORT_SYMBOL(__writel);
-void writesw(void __iomem *addr, const void *data, int len)
+void writesw(volatile void __iomem *addr, const void *data, int len)
{
void __iomem *a = __isamem_convert_addr(addr);
}
EXPORT_SYMBOL(writesw);
-void writesl(void __iomem *addr, const void *data, int len)
+void writesl(volatile void __iomem *addr, const void *data, int len)
{
void __iomem *a = __isamem_convert_addr(addr);
.num_channels = ARRAY_SIZE(ep93xx_dma_m2p_channels),
};
+static u64 ep93xx_dma_m2p_mask = DMA_BIT_MASK(32);
+
static struct platform_device ep93xx_dma_m2p_device = {
.name = "ep93xx-dma-m2p",
.id = -1,
.dev = {
- .platform_data = &ep93xx_dma_m2p_data,
+ .platform_data = &ep93xx_dma_m2p_data,
+ .dma_mask = &ep93xx_dma_m2p_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
};
.num_channels = ARRAY_SIZE(ep93xx_dma_m2m_channels),
};
+static u64 ep93xx_dma_m2m_mask = DMA_BIT_MASK(32);
+
static struct platform_device ep93xx_dma_m2m_device = {
.name = "ep93xx-dma-m2m",
.id = -1,
.dev = {
- .platform_data = &ep93xx_dma_m2m_data,
+ .platform_data = &ep93xx_dma_m2m_data,
+ .dma_mask = &ep93xx_dma_m2m_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
},
};
select PM_GENERIC_DOMAINS if PM_RUNTIME
select S5P_DEV_MFC
select SRAM
+ select MFD_SYSCON
help
Support for SAMSUNG EXYNOS SoCs (EXYNOS4/5)
default y
depends on ARCH_EXYNOS4
+config SOC_EXYNOS4415
+ bool "SAMSUNG EXYNOS4415"
+ default y
+ depends on ARCH_EXYNOS4
+
config SOC_EXYNOS5250
bool "SAMSUNG EXYNOS5250"
default y
This is needed to provide CPU and cluster power management
on Exynos5420 implementing big.LITTLE.
+config EXYNOS_CPU_SUSPEND
+ bool
+ select ARM_CPU_SUSPEND
+ default PM_SLEEP || ARM_EXYNOS_CPUIDLE
+
endif
obj-$(CONFIG_ARCH_EXYNOS) += exynos.o pmu.o exynos-smc.o firmware.o
-obj-$(CONFIG_PM_SLEEP) += pm.o sleep.o
+obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm.o sleep.o
+obj-$(CONFIG_PM_SLEEP) += suspend.o
obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
-obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
-CFLAGS_hotplug.o += -march=armv7-a
-
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec)
+AFLAGS_sleep.o :=-Wa,-march=armv7-a$(plus_sec)
obj-$(CONFIG_EXYNOS5420_MCPM) += mcpm-exynos.o
CFLAGS_mcpm-exynos.o += -march=armv7-a
#ifndef __ARCH_ARM_MACH_EXYNOS_COMMON_H
#define __ARCH_ARM_MACH_EXYNOS_COMMON_H
-#include <linux/reboot.h>
#include <linux/of.h>
#define EXYNOS3250_SOC_ID 0xE3472000
#define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5410() || \
soc_is_exynos5420() || soc_is_exynos5800())
+extern u32 cp15_save_diag;
+extern u32 cp15_save_power;
+
extern void __iomem *sysram_ns_base_addr;
extern void __iomem *sysram_base_addr;
extern void __iomem *pmu_base_addr;
void exynos_sysram_init(void);
+enum {
+ FW_DO_IDLE_SLEEP,
+ FW_DO_IDLE_AFTR,
+};
+
void exynos_firmware_init(void);
extern u32 exynos_get_eint_wake_mask(void);
#endif
extern void exynos_cpu_resume(void);
+extern void exynos_cpu_resume_ns(void);
extern struct smp_operations exynos_smp_ops;
-extern void exynos_cpu_die(unsigned int cpu);
-
-/* PMU(Power Management Unit) support */
-
-#define PMU_TABLE_END (-1U)
-
-enum sys_powerdown {
- SYS_AFTR,
- SYS_LPA,
- SYS_SLEEP,
- NUM_SYS_POWERDOWN,
-};
-
-struct exynos_pmu_conf {
- unsigned int offset;
- unsigned int val[NUM_SYS_POWERDOWN];
-};
-
-extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
extern void exynos_cpu_power_down(int cpu);
extern void exynos_cpu_power_up(int cpu);
extern int exynos_cpu_power_state(int cpu);
extern void exynos_cluster_power_down(int cluster);
extern void exynos_cluster_power_up(int cluster);
extern int exynos_cluster_power_state(int cluster);
+extern void exynos_cpu_save_register(void);
+extern void exynos_cpu_restore_register(void);
+extern void exynos_pm_central_suspend(void);
+extern int exynos_pm_central_resume(void);
extern void exynos_enter_aftr(void);
extern void s5p_init_cpu(void __iomem *cpuid_addr);
--- /dev/null
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * Header for EXYNOS PMU Driver support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __EXYNOS_PMU_H
+#define __EXYNOS_PMU_H
+
+enum sys_powerdown {
+ SYS_AFTR,
+ SYS_LPA,
+ SYS_SLEEP,
+ NUM_SYS_POWERDOWN,
+};
+
+extern void exynos_sys_powerdown_conf(enum sys_powerdown mode);
+
+#endif /* __EXYNOS_PMU_H */
.pfn = __phys_to_pfn(EXYNOS4_PA_SYSCON),
.length = SZ_64K,
.type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_TIMER,
- .pfn = __phys_to_pfn(EXYNOS4_PA_TIMER),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_WATCHDOG,
- .pfn = __phys_to_pfn(EXYNOS4_PA_WATCHDOG),
- .length = SZ_4K,
- .type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_SROMC,
.pfn = __phys_to_pfn(EXYNOS4_PA_SROMC),
.length = SZ_4K,
.type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_SYSTIMER,
- .pfn = __phys_to_pfn(EXYNOS4_PA_SYSTIMER),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_COMBINER_BASE,
- .pfn = __phys_to_pfn(EXYNOS4_PA_COMBINER),
- .length = SZ_4K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GIC_CPU,
- .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_CPU),
- .length = SZ_64K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_GIC_DIST,
- .pfn = __phys_to_pfn(EXYNOS4_PA_GIC_DIST),
- .length = SZ_64K,
- .type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_CMU,
.pfn = __phys_to_pfn(EXYNOS4_PA_CMU),
.pfn = __phys_to_pfn(EXYNOS4_PA_COREPERI),
.length = SZ_8K,
.type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S5P_VA_L2CC,
- .pfn = __phys_to_pfn(EXYNOS4_PA_L2CC),
- .length = SZ_4K,
- .type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_DMC0,
.pfn = __phys_to_pfn(EXYNOS4_PA_DMC0),
.pfn = __phys_to_pfn(EXYNOS4_PA_DMC1),
.length = SZ_64K,
.type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_USB_HSPHY,
- .pfn = __phys_to_pfn(EXYNOS4_PA_HSPHY),
- .length = SZ_4K,
- .type = MT_DEVICE,
},
};
.pfn = __phys_to_pfn(EXYNOS5_PA_SYSCON),
.length = SZ_64K,
.type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_TIMER,
- .pfn = __phys_to_pfn(EXYNOS5_PA_TIMER),
- .length = SZ_16K,
- .type = MT_DEVICE,
- }, {
- .virtual = (unsigned long)S3C_VA_WATCHDOG,
- .pfn = __phys_to_pfn(EXYNOS5_PA_WATCHDOG),
- .length = SZ_4K,
- .type = MT_DEVICE,
}, {
.virtual = (unsigned long)S5P_VA_SROMC,
.pfn = __phys_to_pfn(EXYNOS5_PA_SROMC),
},
};
-static void exynos_restart(enum reboot_mode mode, const char *cmd)
-{
- struct device_node *np;
- u32 val = 0x1;
- void __iomem *addr = pmu_base_addr + EXYNOS_SWRESET;
-
- if (of_machine_is_compatible("samsung,exynos5440")) {
- u32 status;
- np = of_find_compatible_node(NULL, NULL, "samsung,exynos5440-clock");
-
- addr = of_iomap(np, 0) + 0xbc;
- status = __raw_readl(addr);
-
- addr = of_iomap(np, 0) + 0xcc;
- val = __raw_readl(addr);
-
- val = (val & 0xffff0000) | (status & 0xffff);
- }
-
- __raw_writel(val, addr);
-}
-
static struct platform_device exynos_cpuidle = {
.name = "exynos_cpuidle",
#ifdef CONFIG_ARM_EXYNOS_CPUIDLE
{ .compatible = "samsung,exynos4210-pmu" },
{ .compatible = "samsung,exynos4212-pmu" },
{ .compatible = "samsung,exynos4412-pmu" },
+ { .compatible = "samsung,exynos4415-pmu" },
{ .compatible = "samsung,exynos5250-pmu" },
{ .compatible = "samsung,exynos5260-pmu" },
{ .compatible = "samsung,exynos5410-pmu" },
exynos_sysram_init();
if (of_machine_is_compatible("samsung,exynos4210") ||
- of_machine_is_compatible("samsung,exynos5250"))
+ of_machine_is_compatible("samsung,exynos4212") ||
+ (of_machine_is_compatible("samsung,exynos4412") &&
+ of_machine_is_compatible("samsung,trats2")) ||
+ of_machine_is_compatible("samsung,exynos5250"))
platform_device_register(&exynos_cpuidle);
platform_device_register_simple("exynos-cpufreq", -1, NULL, 0);
"samsung,exynos4210",
"samsung,exynos4212",
"samsung,exynos4412",
+ "samsung,exynos4415",
"samsung,exynos5",
"samsung,exynos5250",
"samsung,exynos5260",
.init_machine = exynos_dt_machine_init,
.init_late = exynos_init_late,
.dt_compat = exynos_dt_compat,
- .restart = exynos_restart,
.reserve = exynos_reserve,
.dt_fixup = exynos_dt_fixup,
MACHINE_END
#include <linux/of.h>
#include <linux/of_address.h>
+#include <asm/cacheflush.h>
+#include <asm/cputype.h>
#include <asm/firmware.h>
+#include <asm/suspend.h>
#include <mach/map.h>
#include "common.h"
#include "smc.h"
-static int exynos_do_idle(void)
+#define EXYNOS_SLEEP_MAGIC 0x00000bad
+#define EXYNOS_AFTR_MAGIC 0xfcba0d10
+#define EXYNOS_BOOT_ADDR 0x8
+#define EXYNOS_BOOT_FLAG 0xc
+
+static void exynos_save_cp15(void)
{
- exynos_smc(SMC_CMD_SLEEP, 0, 0, 0);
+ /* Save Power control and Diagnostic registers */
+ asm ("mrc p15, 0, %0, c15, c0, 0\n"
+ "mrc p15, 0, %1, c15, c0, 1\n"
+ : "=r" (cp15_save_power), "=r" (cp15_save_diag)
+ : : "cc");
+}
+
+static int exynos_do_idle(unsigned long mode)
+{
+ switch (mode) {
+ case FW_DO_IDLE_AFTR:
+ if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
+ exynos_save_cp15();
+ __raw_writel(virt_to_phys(exynos_cpu_resume_ns),
+ sysram_ns_base_addr + 0x24);
+ __raw_writel(EXYNOS_AFTR_MAGIC, sysram_ns_base_addr + 0x20);
+ exynos_smc(SMC_CMD_CPU0AFTR, 0, 0, 0);
+ break;
+ case FW_DO_IDLE_SLEEP:
+ exynos_smc(SMC_CMD_SLEEP, 0, 0, 0);
+ }
return 0;
}
return 0;
}
+static int exynos_cpu_suspend(unsigned long arg)
+{
+ flush_cache_all();
+ outer_flush_all();
+
+ exynos_smc(SMC_CMD_SLEEP, 0, 0, 0);
+
+ pr_info("Failed to suspend the system\n");
+ writel(0, sysram_ns_base_addr + EXYNOS_BOOT_FLAG);
+ return 1;
+}
+
+static int exynos_suspend(void)
+{
+ if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
+ exynos_save_cp15();
+
+ writel(EXYNOS_SLEEP_MAGIC, sysram_ns_base_addr + EXYNOS_BOOT_FLAG);
+ writel(virt_to_phys(exynos_cpu_resume_ns),
+ sysram_ns_base_addr + EXYNOS_BOOT_ADDR);
+
+ return cpu_suspend(0, exynos_cpu_suspend);
+}
+
+static int exynos_resume(void)
+{
+ writel(0, sysram_ns_base_addr + EXYNOS_BOOT_FLAG);
+
+ return 0;
+}
+
static const struct firmware_ops exynos_firmware_ops = {
- .do_idle = exynos_do_idle,
+ .do_idle = IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_do_idle : NULL,
.set_cpu_boot_addr = exynos_set_cpu_boot_addr,
.cpu_boot = exynos_cpu_boot,
+ .suspend = IS_ENABLED(CONFIG_PM_SLEEP) ? exynos_suspend : NULL,
+ .resume = IS_ENABLED(CONFIG_EXYNOS_CPU_SUSPEND) ? exynos_resume : NULL,
};
void __init exynos_firmware_init(void)
+++ /dev/null
-/*
- * Cloned from linux/arch/arm/mach-realview/hotplug.c
- *
- * Copyright (C) 2002 ARM Ltd.
- * All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-
-#include <asm/cacheflush.h>
-#include <asm/cp15.h>
-#include <asm/smp_plat.h>
-
-#include "common.h"
-#include "regs-pmu.h"
-
-static inline void cpu_leave_lowpower(void)
-{
- unsigned int v;
-
- asm volatile(
- "mrc p15, 0, %0, c1, c0, 0\n"
- " orr %0, %0, %1\n"
- " mcr p15, 0, %0, c1, c0, 0\n"
- " mrc p15, 0, %0, c1, c0, 1\n"
- " orr %0, %0, %2\n"
- " mcr p15, 0, %0, c1, c0, 1\n"
- : "=&r" (v)
- : "Ir" (CR_C), "Ir" (0x40)
- : "cc");
-}
-
-static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
-{
- u32 mpidr = cpu_logical_map(cpu);
- u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
-
- for (;;) {
-
- /* Turn the CPU off on next WFI instruction. */
- exynos_cpu_power_down(core_id);
-
- wfi();
-
- if (pen_release == core_id) {
- /*
- * OK, proper wakeup, we're done
- */
- break;
- }
-
- /*
- * Getting here, means that we have come out of WFI without
- * having been woken up - this shouldn't happen
- *
- * Just note it happening - when we're woken, we can report
- * its occurrence.
- */
- (*spurious)++;
- }
-}
-
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void __ref exynos_cpu_die(unsigned int cpu)
-{
- int spurious = 0;
-
- v7_exit_coherency_flush(louis);
-
- platform_do_lowpower(cpu, &spurious);
-
- /*
- * bring this CPU back into the world of cache
- * coherency, and then restore interrupts
- */
- cpu_leave_lowpower();
-
- if (spurious)
- pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
-}
#define EXYNOS4_PA_CMU 0x10030000
#define EXYNOS5_PA_CMU 0x10010000
-#define EXYNOS4_PA_SYSTIMER 0x10050000
-
-#define EXYNOS4_PA_WATCHDOG 0x10060000
-#define EXYNOS5_PA_WATCHDOG 0x101D0000
-
#define EXYNOS4_PA_DMC0 0x10400000
#define EXYNOS4_PA_DMC1 0x10410000
-#define EXYNOS4_PA_COMBINER 0x10440000
-#define EXYNOS5_PA_COMBINER 0x10440000
-
-#define EXYNOS4_PA_GIC_CPU 0x10480000
-#define EXYNOS4_PA_GIC_DIST 0x10490000
-#define EXYNOS5_PA_GIC_CPU 0x10482000
-#define EXYNOS5_PA_GIC_DIST 0x10481000
-
#define EXYNOS4_PA_COREPERI 0x10500000
#define EXYNOS4_PA_L2CC 0x10502000
#define EXYNOS4_PA_SROMC 0x12570000
#define EXYNOS5_PA_SROMC 0x12250000
-#define EXYNOS4_PA_HSPHY 0x125B0000
-
-#define EXYNOS4_PA_UART 0x13800000
-#define EXYNOS5_PA_UART 0x12C00000
-
-#define EXYNOS4_PA_TIMER 0x139D0000
-#define EXYNOS5_PA_TIMER 0x12DD0000
-
/* Compatibility UART */
#define EXYNOS5440_PA_UART0 0x000B0000
-#define S3C_VA_UARTx(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
-
#endif /* __ASM_ARCH_MAP_H */
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
#include <asm/cputype.h>
#include <asm/cp15.h>
#define EXYNOS5420_USE_ARM_CORE_DOWN_STATE BIT(29)
#define EXYNOS5420_USE_L2_COMMON_UP_STATE BIT(30)
+static void __iomem *ns_sram_base_addr;
+
/*
* The common v7_exit_coherency_flush API could not be used because of the
* Erratum 799270 workaround. This macro is the same as the common one (in
{},
};
+static void exynos_mcpm_setup_entry_point(void)
+{
+ /*
+ * U-Boot SPL is hardcoded to jump to the start of ns_sram_base_addr
+ * as part of secondary_cpu_start(). Let's redirect it to the
+ * mcpm_entry_point(). This is done during both secondary boot-up as
+ * well as system resume.
+ */
+ __raw_writel(0xe59f0000, ns_sram_base_addr); /* ldr r0, [pc, #0] */
+ __raw_writel(0xe12fff10, ns_sram_base_addr + 4); /* bx r0 */
+ __raw_writel(virt_to_phys(mcpm_entry_point), ns_sram_base_addr + 8);
+}
+
+static struct syscore_ops exynos_mcpm_syscore_ops = {
+ .resume = exynos_mcpm_setup_entry_point,
+};
+
static int __init exynos_mcpm_init(void)
{
struct device_node *node;
- void __iomem *ns_sram_base_addr;
unsigned int value, i;
int ret;
pmu_raw_writel(value, EXYNOS_COMMON_OPTION(i));
}
- /*
- * U-Boot SPL is hardcoded to jump to the start of ns_sram_base_addr
- * as part of secondary_cpu_start(). Let's redirect it to the
- * mcpm_entry_point().
- */
- __raw_writel(0xe59f0000, ns_sram_base_addr); /* ldr r0, [pc, #0] */
- __raw_writel(0xe12fff10, ns_sram_base_addr + 4); /* bx r0 */
- __raw_writel(virt_to_phys(mcpm_entry_point), ns_sram_base_addr + 8);
+ exynos_mcpm_setup_entry_point();
- iounmap(ns_sram_base_addr);
+ register_syscore_ops(&exynos_mcpm_syscore_ops);
return ret;
}
#include <linux/of_address.h>
#include <asm/cacheflush.h>
+#include <asm/cp15.h>
#include <asm/smp_plat.h>
#include <asm/smp_scu.h>
#include <asm/firmware.h>
extern void exynos4_secondary_startup(void);
+/*
+ * Set or clear the USE_DELAYED_RESET_ASSERTION option, set on Exynos4 SoCs
+ * during hot-(un)plugging CPUx.
+ *
+ * The feature can be cleared safely during first boot of secondary CPU.
+ *
+ * Exynos4 SoCs require setting USE_DELAYED_RESET_ASSERTION during powering
+ * down a CPU so the CPU idle clock down feature could properly detect global
+ * idle state when CPUx is off.
+ */
+static void exynos_set_delayed_reset_assertion(u32 core_id, bool enable)
+{
+ if (soc_is_exynos4()) {
+ unsigned int tmp;
+
+ tmp = pmu_raw_readl(EXYNOS_ARM_CORE_OPTION(core_id));
+ if (enable)
+ tmp |= S5P_USE_DELAYED_RESET_ASSERTION;
+ else
+ tmp &= ~(S5P_USE_DELAYED_RESET_ASSERTION);
+ pmu_raw_writel(tmp, EXYNOS_ARM_CORE_OPTION(core_id));
+ }
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static inline void cpu_leave_lowpower(u32 core_id)
+{
+ unsigned int v;
+
+ asm volatile(
+ "mrc p15, 0, %0, c1, c0, 0\n"
+ " orr %0, %0, %1\n"
+ " mcr p15, 0, %0, c1, c0, 0\n"
+ " mrc p15, 0, %0, c1, c0, 1\n"
+ " orr %0, %0, %2\n"
+ " mcr p15, 0, %0, c1, c0, 1\n"
+ : "=&r" (v)
+ : "Ir" (CR_C), "Ir" (0x40)
+ : "cc");
+
+ exynos_set_delayed_reset_assertion(core_id, false);
+}
+
+static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
+{
+ u32 mpidr = cpu_logical_map(cpu);
+ u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+
+ for (;;) {
+
+ /* Turn the CPU off on next WFI instruction. */
+ exynos_cpu_power_down(core_id);
+
+ /*
+ * Exynos4 SoCs require setting
+ * USE_DELAYED_RESET_ASSERTION so the CPU idle
+ * clock down feature could properly detect
+ * global idle state when CPUx is off.
+ */
+ exynos_set_delayed_reset_assertion(core_id, true);
+
+ wfi();
+
+ if (pen_release == core_id) {
+ /*
+ * OK, proper wakeup, we're done
+ */
+ break;
+ }
+
+ /*
+ * Getting here, means that we have come out of WFI without
+ * having been woken up - this shouldn't happen
+ *
+ * Just note it happening - when we're woken, we can report
+ * its occurrence.
+ */
+ (*spurious)++;
+ }
+}
+#endif /* CONFIG_HOTPLUG_CPU */
+
/**
* exynos_core_power_down : power down the specified cpu
* @cpu : the cpu to power down
*/
void exynos_cpu_power_down(int cpu)
{
+ if (cpu == 0 && (of_machine_is_compatible("samsung,exynos5420") ||
+ of_machine_is_compatible("samsung,exynos5800"))) {
+ /*
+ * Bypass power down for CPU0 during suspend. Check for
+ * the SYS_PWR_REG value to decide if we are suspending
+ * the system.
+ */
+ int val = pmu_raw_readl(EXYNOS5_ARM_CORE0_SYS_PWR_REG);
+
+ if (!(val & S5P_CORE_LOCAL_PWR_EN))
+ return;
+ }
pmu_raw_writel(0, EXYNOS_ARM_CORE_CONFIGURATION(cpu));
}
return boot_reg;
}
+/*
+ * Set wake up by local power mode and execute software reset for given core.
+ *
+ * Currently this is needed only when booting secondary CPU on Exynos3250.
+ */
+static void exynos_core_restart(u32 core_id)
+{
+ u32 val;
+
+ if (!of_machine_is_compatible("samsung,exynos3250"))
+ return;
+
+ val = pmu_raw_readl(EXYNOS_ARM_CORE_STATUS(core_id));
+ val |= S5P_CORE_WAKEUP_FROM_LOCAL_CFG;
+ pmu_raw_writel(val, EXYNOS_ARM_CORE_STATUS(core_id));
+
+ pr_info("CPU%u: Software reset\n", core_id);
+ pmu_raw_writel(EXYNOS_CORE_PO_RESET(core_id), EXYNOS_SWRESET);
+}
+
/*
* Write pen_release in a way that is guaranteed to be visible to all
* observers, irrespective of whether they're taking part in coherency
return -ETIMEDOUT;
}
}
+
+ exynos_core_restart(core_id);
+
/*
* Send the secondary CPU a soft interrupt, thereby causing
* the boot monitor to read the system wide flags register,
udelay(10);
}
+ /* No harm if this is called during first boot of secondary CPU */
+ exynos_set_delayed_reset_assertion(core_id, false);
+
/*
* now the secondary core is starting up let it run its
* calibrations, then wait for it to finish
}
}
+#ifdef CONFIG_HOTPLUG_CPU
+/*
+ * platform-specific code to shutdown a CPU
+ *
+ * Called with IRQs disabled
+ */
+static void exynos_cpu_die(unsigned int cpu)
+{
+ int spurious = 0;
+ u32 mpidr = cpu_logical_map(cpu);
+ u32 core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+
+ v7_exit_coherency_flush(louis);
+
+ platform_do_lowpower(cpu, &spurious);
+
+ /*
+ * bring this CPU back into the world of cache
+ * coherency, and then restore interrupts
+ */
+ cpu_leave_lowpower(core_id);
+
+ if (spurious)
+ pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
+}
+#endif /* CONFIG_HOTPLUG_CPU */
+
struct smp_operations exynos_smp_ops __initdata = {
.smp_init_cpus = exynos_smp_init_cpus,
.smp_prepare_cpus = exynos_smp_prepare_cpus,
/*
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS - Power Management support
#include <linux/init.h>
#include <linux/suspend.h>
-#include <linux/syscore_ops.h>
#include <linux/cpu_pm.h>
#include <linux/io.h>
-#include <linux/irqchip/arm-gic.h>
#include <linux/err.h>
-#include <linux/clk.h>
-#include <asm/cacheflush.h>
-#include <asm/hardware/cache-l2x0.h>
+#include <asm/firmware.h>
#include <asm/smp_scu.h>
#include <asm/suspend.h>
#include <plat/pm-common.h>
-#include <plat/regs-srom.h>
-
-#include <mach/map.h>
#include "common.h"
+#include "exynos-pmu.h"
#include "regs-pmu.h"
#include "regs-sys.h"
-/**
- * struct exynos_wkup_irq - Exynos GIC to PMU IRQ mapping
- * @hwirq: Hardware IRQ signal of the GIC
- * @mask: Mask in PMU wake-up mask register
- */
-struct exynos_wkup_irq {
- unsigned int hwirq;
- u32 mask;
-};
-
-static struct sleep_save exynos5_sys_save[] = {
- SAVE_ITEM(EXYNOS5_SYS_I2C_CFG),
-};
-
-static struct sleep_save exynos_core_save[] = {
- /* SROM side */
- SAVE_ITEM(S5P_SROM_BW),
- SAVE_ITEM(S5P_SROM_BC0),
- SAVE_ITEM(S5P_SROM_BC1),
- SAVE_ITEM(S5P_SROM_BC2),
- SAVE_ITEM(S5P_SROM_BC3),
-};
-
-/*
- * GIC wake-up support
- */
-
-static u32 exynos_irqwake_intmask = 0xffffffff;
-
-static const struct exynos_wkup_irq exynos4_wkup_irq[] = {
- { 76, BIT(1) }, /* RTC alarm */
- { 77, BIT(2) }, /* RTC tick */
- { /* sentinel */ },
-};
-
-static const struct exynos_wkup_irq exynos5250_wkup_irq[] = {
- { 75, BIT(1) }, /* RTC alarm */
- { 76, BIT(2) }, /* RTC tick */
- { /* sentinel */ },
-};
-
-static int exynos_irq_set_wake(struct irq_data *data, unsigned int state)
+static inline void __iomem *exynos_boot_vector_addr(void)
{
- const struct exynos_wkup_irq *wkup_irq;
-
- if (soc_is_exynos5250())
- wkup_irq = exynos5250_wkup_irq;
- else
- wkup_irq = exynos4_wkup_irq;
-
- while (wkup_irq->mask) {
- if (wkup_irq->hwirq == data->hwirq) {
- if (!state)
- exynos_irqwake_intmask |= wkup_irq->mask;
- else
- exynos_irqwake_intmask &= ~wkup_irq->mask;
- return 0;
- }
- ++wkup_irq;
- }
-
- return -ENOENT;
+ if (samsung_rev() == EXYNOS4210_REV_1_1)
+ return pmu_base_addr + S5P_INFORM7;
+ else if (samsung_rev() == EXYNOS4210_REV_1_0)
+ return sysram_base_addr + 0x24;
+ return pmu_base_addr + S5P_INFORM0;
}
-#define EXYNOS_BOOT_VECTOR_ADDR (samsung_rev() == EXYNOS4210_REV_1_1 ? \
- pmu_base_addr + S5P_INFORM7 : \
- (samsung_rev() == EXYNOS4210_REV_1_0 ? \
- (sysram_base_addr + 0x24) : \
- pmu_base_addr + S5P_INFORM0))
-#define EXYNOS_BOOT_VECTOR_FLAG (samsung_rev() == EXYNOS4210_REV_1_1 ? \
- pmu_base_addr + S5P_INFORM6 : \
- (samsung_rev() == EXYNOS4210_REV_1_0 ? \
- (sysram_base_addr + 0x20) : \
- pmu_base_addr + S5P_INFORM1))
+static inline void __iomem *exynos_boot_vector_flag(void)
+{
+ if (samsung_rev() == EXYNOS4210_REV_1_1)
+ return pmu_base_addr + S5P_INFORM6;
+ else if (samsung_rev() == EXYNOS4210_REV_1_0)
+ return sysram_base_addr + 0x20;
+ return pmu_base_addr + S5P_INFORM1;
+}
#define S5P_CHECK_AFTR 0xFCBA0D10
-#define S5P_CHECK_SLEEP 0x00000BAD
/* For Cortex-A9 Diagnostic and Power control register */
static unsigned int save_arm_register[2];
-static void exynos_cpu_save_register(void)
+void exynos_cpu_save_register(void)
{
unsigned long tmp;
save_arm_register[1] = tmp;
}
-static void exynos_cpu_restore_register(void)
+void exynos_cpu_restore_register(void)
{
unsigned long tmp;
: "cc");
}
-static void exynos_pm_central_suspend(void)
+void exynos_pm_central_suspend(void)
{
unsigned long tmp;
tmp = pmu_raw_readl(S5P_CENTRAL_SEQ_CONFIGURATION);
tmp &= ~S5P_CENTRAL_LOWPWR_CFG;
pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION);
+
+ /* Setting SEQ_OPTION register */
+ pmu_raw_writel(S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0,
+ S5P_CENTRAL_SEQ_OPTION);
}
-static int exynos_pm_central_resume(void)
+int exynos_pm_central_resume(void)
{
unsigned long tmp;
static void exynos_cpu_set_boot_vector(long flags)
{
- __raw_writel(virt_to_phys(exynos_cpu_resume), EXYNOS_BOOT_VECTOR_ADDR);
- __raw_writel(flags, EXYNOS_BOOT_VECTOR_FLAG);
+ __raw_writel(virt_to_phys(exynos_cpu_resume),
+ exynos_boot_vector_addr());
+ __raw_writel(flags, exynos_boot_vector_flag());
}
static int exynos_aftr_finisher(unsigned long flags)
{
+ int ret;
+
exynos_set_wakeupmask(0x0000ff3e);
- exynos_cpu_set_boot_vector(S5P_CHECK_AFTR);
/* Set value of power down register for aftr mode */
exynos_sys_powerdown_conf(SYS_AFTR);
- cpu_do_idle();
+
+ ret = call_firmware_op(do_idle, FW_DO_IDLE_AFTR);
+ if (ret == -ENOSYS) {
+ if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
+ exynos_cpu_save_register();
+ exynos_cpu_set_boot_vector(S5P_CHECK_AFTR);
+ cpu_do_idle();
+ }
return 1;
}
cpu_pm_enter();
exynos_pm_central_suspend();
- if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
- exynos_cpu_save_register();
cpu_suspend(0, exynos_aftr_finisher);
if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
scu_enable(S5P_VA_SCU);
- exynos_cpu_restore_register();
+ if (call_firmware_op(resume) == -ENOSYS)
+ exynos_cpu_restore_register();
}
exynos_pm_central_resume();
cpu_pm_exit();
}
-
-static int exynos_cpu_suspend(unsigned long arg)
-{
-#ifdef CONFIG_CACHE_L2X0
- outer_flush_all();
-#endif
-
- if (soc_is_exynos5250())
- flush_cache_all();
-
- /* issue the standby signal into the pm unit. */
- cpu_do_idle();
-
- pr_info("Failed to suspend the system\n");
- return 1; /* Aborting suspend */
-}
-
-static void exynos_pm_prepare(void)
-{
- unsigned int tmp;
-
- /* Set wake-up mask registers */
- pmu_raw_writel(exynos_get_eint_wake_mask(), S5P_EINT_WAKEUP_MASK);
- pmu_raw_writel(exynos_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK);
-
- s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
-
- if (soc_is_exynos5250()) {
- s3c_pm_do_save(exynos5_sys_save, ARRAY_SIZE(exynos5_sys_save));
- /* Disable USE_RETENTION of JPEG_MEM_OPTION */
- tmp = pmu_raw_readl(EXYNOS5_JPEG_MEM_OPTION);
- tmp &= ~EXYNOS5_OPTION_USE_RETENTION;
- pmu_raw_writel(tmp, EXYNOS5_JPEG_MEM_OPTION);
- }
-
- /* Set value of power down register for sleep mode */
-
- exynos_sys_powerdown_conf(SYS_SLEEP);
- pmu_raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1);
-
- /* ensure at least INFORM0 has the resume address */
-
- pmu_raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0);
-}
-
-static int exynos_pm_suspend(void)
-{
- unsigned long tmp;
-
- exynos_pm_central_suspend();
-
- /* Setting SEQ_OPTION register */
-
- tmp = (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFE0);
- pmu_raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION);
-
- if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
- exynos_cpu_save_register();
-
- return 0;
-}
-
-static void exynos_pm_resume(void)
-{
- if (exynos_pm_central_resume())
- goto early_wakeup;
-
- if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
- exynos_cpu_restore_register();
-
- /* For release retention */
-
- pmu_raw_writel((1 << 28), S5P_PAD_RET_MAUDIO_OPTION);
- pmu_raw_writel((1 << 28), S5P_PAD_RET_GPIO_OPTION);
- pmu_raw_writel((1 << 28), S5P_PAD_RET_UART_OPTION);
- pmu_raw_writel((1 << 28), S5P_PAD_RET_MMCA_OPTION);
- pmu_raw_writel((1 << 28), S5P_PAD_RET_MMCB_OPTION);
- pmu_raw_writel((1 << 28), S5P_PAD_RET_EBIA_OPTION);
- pmu_raw_writel((1 << 28), S5P_PAD_RET_EBIB_OPTION);
-
- if (soc_is_exynos5250())
- s3c_pm_do_restore(exynos5_sys_save,
- ARRAY_SIZE(exynos5_sys_save));
-
- s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save));
-
- if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
- scu_enable(S5P_VA_SCU);
-
-early_wakeup:
-
- /* Clear SLEEP mode set in INFORM1 */
- pmu_raw_writel(0x0, S5P_INFORM1);
-
- return;
-}
-
-static struct syscore_ops exynos_pm_syscore_ops = {
- .suspend = exynos_pm_suspend,
- .resume = exynos_pm_resume,
-};
-
-/*
- * Suspend Ops
- */
-
-static int exynos_suspend_enter(suspend_state_t state)
-{
- int ret;
-
- s3c_pm_debug_init();
-
- S3C_PMDBG("%s: suspending the system...\n", __func__);
-
- S3C_PMDBG("%s: wakeup masks: %08x,%08x\n", __func__,
- exynos_irqwake_intmask, exynos_get_eint_wake_mask());
-
- if (exynos_irqwake_intmask == -1U
- && exynos_get_eint_wake_mask() == -1U) {
- pr_err("%s: No wake-up sources!\n", __func__);
- pr_err("%s: Aborting sleep\n", __func__);
- return -EINVAL;
- }
-
- s3c_pm_save_uarts();
- exynos_pm_prepare();
- flush_cache_all();
- s3c_pm_check_store();
-
- ret = cpu_suspend(0, exynos_cpu_suspend);
- if (ret)
- return ret;
-
- s3c_pm_restore_uarts();
-
- S3C_PMDBG("%s: wakeup stat: %08x\n", __func__,
- pmu_raw_readl(S5P_WAKEUP_STAT));
-
- s3c_pm_check_restore();
-
- S3C_PMDBG("%s: resuming the system...\n", __func__);
-
- return 0;
-}
-
-static int exynos_suspend_prepare(void)
-{
- s3c_pm_check_prepare();
-
- return 0;
-}
-
-static void exynos_suspend_finish(void)
-{
- s3c_pm_check_cleanup();
-}
-
-static const struct platform_suspend_ops exynos_suspend_ops = {
- .enter = exynos_suspend_enter,
- .prepare = exynos_suspend_prepare,
- .finish = exynos_suspend_finish,
- .valid = suspend_valid_only_mem,
-};
-
-void __init exynos_pm_init(void)
-{
- u32 tmp;
-
- /* Platform-specific GIC callback */
- gic_arch_extn.irq_set_wake = exynos_irq_set_wake;
-
- /* All wakeup disable */
- tmp = pmu_raw_readl(S5P_WAKEUP_MASK);
- tmp |= ((0xFF << 8) | (0x1F << 1));
- pmu_raw_writel(tmp, S5P_WAKEUP_MASK);
-
- register_syscore_ops(&exynos_pm_syscore_ops);
- suspend_set_ops(&exynos_suspend_ops);
-}
/*
- * Copyright (c) 2011-2012 Samsung Electronics Co., Ltd.
+ * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* EXYNOS - CPU PMU(Power Management Unit) support
*/
#include <linux/io.h>
-#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
-#include "common.h"
+
+#include "exynos-pmu.h"
#include "regs-pmu.h"
-static const struct exynos_pmu_conf *exynos_pmu_config;
+#define PMU_TABLE_END (-1U)
+
+struct exynos_pmu_conf {
+ unsigned int offset;
+ u8 val[NUM_SYS_POWERDOWN];
+};
+
+struct exynos_pmu_data {
+ const struct exynos_pmu_conf *pmu_config;
+ const struct exynos_pmu_conf *pmu_config_extra;
+
+ void (*pmu_init)(void);
+ void (*powerdown_conf)(enum sys_powerdown);
+ void (*powerdown_conf_extra)(enum sys_powerdown);
+};
+
+struct exynos_pmu_context {
+ struct device *dev;
+ const struct exynos_pmu_data *pmu_data;
+};
+
+static void __iomem *pmu_base_addr;
+static struct exynos_pmu_context *pmu_context;
+
+static inline void pmu_raw_writel(u32 val, u32 offset)
+{
+ writel_relaxed(val, pmu_base_addr + offset);
+}
+
+static inline u32 pmu_raw_readl(u32 offset)
+{
+ return readl_relaxed(pmu_base_addr + offset);
+}
+
+static struct exynos_pmu_conf exynos3250_pmu_config[] = {
+ /* { .offset = offset, .val = { AFTR, W-AFTR, SLEEP } */
+ { EXYNOS3_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
+ { EXYNOS3_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS3_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS3_ARM_CORE1_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
+ { EXYNOS3_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS3_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS3_ISP_ARM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS3_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS3_ARM_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x2} },
+ { EXYNOS3_ARM_L2_SYS_PWR_REG, { 0x0, 0x0, 0x3} },
+ { EXYNOS3_CMU_ACLKSTOP_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_CMU_SCLKSTOP_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_CMU_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_DRAM_FREQ_DOWN_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_DDRPHY_DLLOFF_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_LPDDR_PHY_DLL_LOCK_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_CMU_ACLKSTOP_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_SCLKSTOP_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_APLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_MPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_BPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_VPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_EPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_UPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_EPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_MPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_BPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_CLKSTOP_CAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_CLKSTOP_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_CLKSTOP_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_CLKSTOP_LCD0_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_CLKSTOP_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_CLKSTOP_MAUDIO_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_CAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_MFC_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_G3D_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_LCD0_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_CMU_RESET_MAUDIO_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS3_TOP_BUS_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS3_TOP_RETENTION_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_TOP_PWR_SYS_PWR_REG, { 0x3, 0x3, 0x3} },
+ { EXYNOS3_TOP_BUS_COREBLK_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS3_TOP_RETENTION_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_TOP_PWR_COREBLK_SYS_PWR_REG, { 0x3, 0x3, 0x3} },
+ { EXYNOS3_LOGIC_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_OSCCLK_GATE_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS3_LOGIC_RESET_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_OSCCLK_GATE_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
+ { EXYNOS3_PAD_RETENTION_DRAM_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_MAUDIO_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_GPIO_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_UART_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_MMC0_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_MMC1_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_MMC2_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_SPI_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_EBIA_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_EBIB_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_RETENTION_JTAG_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_ISOLATION_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_PAD_ALV_SEL_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_XUSBXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_XXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_EXT_REGULATOR_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_EXT_REGULATOR_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_GPIO_MODE_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_GPIO_MODE_MAUDIO_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_TOP_ASB_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_TOP_ASB_ISOLATION_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_TOP_ASB_RESET_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_TOP_ASB_ISOLATION_COREBLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS3_CAM_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS3_MFC_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS3_G3D_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS3_LCD0_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS3_ISP_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS3_MAUDIO_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS3_CMU_SYSCLK_ISP_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { PMU_TABLE_END,},
+};
static const struct exynos_pmu_conf exynos4210_pmu_config[] = {
/* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
{ EXYNOS5_INTRAM_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
{ EXYNOS5_INTROM_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
{ EXYNOS5_JPEG_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS5_JPEG_MEM_OPTION, { 0x10, 0x10, 0x0} },
{ EXYNOS5_HSI_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
{ EXYNOS5_MCUIOP_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
{ EXYNOS5_SATA_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
{ PMU_TABLE_END,},
};
+static struct exynos_pmu_conf exynos5420_pmu_config[] = {
+ /* { .offset = offset, .val = { AFTR, LPA, SLEEP } */
+ { EXYNOS5_ARM_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_ARM_CORE1_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_ARM_CORE2_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_ARM_CORE3_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_DIS_IRQ_ARM_CORE3_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_DIS_IRQ_ARM_CORE3_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_KFC_CORE0_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_DIS_IRQ_KFC_CORE0_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_DIS_IRQ_KFC_CORE0_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_KFC_CORE1_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_DIS_IRQ_KFC_CORE1_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_DIS_IRQ_KFC_CORE1_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_KFC_CORE2_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_DIS_IRQ_KFC_CORE2_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_DIS_IRQ_KFC_CORE2_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_KFC_CORE3_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_DIS_IRQ_KFC_CORE3_LOCAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_DIS_IRQ_KFC_CORE3_CENTRAL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_ISP_ARM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_ARM_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_KFC_COMMON_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_ARM_L2_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_KFC_L2_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_CMU_ACLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_CMU_SCLKSTOP_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
+ { EXYNOS5_CMU_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_CMU_ACLKSTOP_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_CMU_SCLKSTOP_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
+ { EXYNOS5_CMU_RESET_SYSMEM_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_DRAM_FREQ_DOWN_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
+ { EXYNOS5_DDRPHY_DLLOFF_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS5_DDRPHY_DLLLOCK_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
+ { EXYNOS5_APLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_MPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_VPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_EPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_BPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_CPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_DPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_IPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_KPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_MPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_BPLLUSER_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_RPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_SPLL_SYSCLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_TOP_BUS_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS5_TOP_RETENTION_SYS_PWR_REG, { 0x1, 0x1, 0x1} },
+ { EXYNOS5_TOP_PWR_SYS_PWR_REG, { 0x3, 0x3, 0x0} },
+ { EXYNOS5_TOP_BUS_SYSMEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS5_TOP_RETENTION_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
+ { EXYNOS5_TOP_PWR_SYSMEM_SYS_PWR_REG, { 0x3, 0x0, 0x0} },
+ { EXYNOS5_LOGIC_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_OSCCLK_GATE_SYS_PWR_REG, { 0x1, 0x0, 0x1} },
+ { EXYNOS5_LOGIC_RESET_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_OSCCLK_GATE_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_INTRAM_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x3} },
+ { EXYNOS5420_INTROM_MEM_SYS_PWR_REG, { 0x3, 0x0, 0x3} },
+ { EXYNOS5_PAD_RETENTION_DRAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_PAD_RETENTION_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5420_PAD_RETENTION_JTAG_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5420_PAD_RETENTION_DRAM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_PAD_RETENTION_UART_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_PAD_RETENTION_MMC0_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_PAD_RETENTION_MMC1_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_PAD_RETENTION_MMC2_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_PAD_RETENTION_HSI_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_PAD_RETENTION_EBIA_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_PAD_RETENTION_EBIB_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_PAD_RETENTION_SPI_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5420_PAD_RETENTION_DRAM_COREBLK_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_PAD_ISOLATION_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_PAD_ISOLATION_SYSMEM_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_PAD_ALV_SEL_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_XUSBXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_XXTI_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_EXT_REGULATOR_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_GPIO_MODE_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_GPIO_MODE_SYSMEM_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_GPIO_MODE_MAU_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_TOP_ASB_RESET_SYS_PWR_REG, { 0x1, 0x1, 0x0} },
+ { EXYNOS5_TOP_ASB_ISOLATION_SYS_PWR_REG, { 0x1, 0x0, 0x0} },
+ { EXYNOS5_GSCL_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5_ISP_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5_MFC_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5_G3D_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5420_DISP1_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5420_MAU_SYS_PWR_REG, { 0x7, 0x7, 0x0} },
+ { EXYNOS5420_G2D_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5420_MSC_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5420_FSYS_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5420_FSYS2_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5420_PSGEN_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5420_PERIC_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5420_WCORE_SYS_PWR_REG, { 0x7, 0x0, 0x0} },
+ { EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_CMU_CLKSTOP_MFC_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_CMU_SYSCLK_MFC_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_CMU_RESET_MFC_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG, { 0x0, 0x0, 0x0} },
+ { PMU_TABLE_END,},
+};
+
+static unsigned int const exynos3250_list_feed[] = {
+ EXYNOS3_ARM_CORE_OPTION(0),
+ EXYNOS3_ARM_CORE_OPTION(1),
+ EXYNOS3_ARM_CORE_OPTION(2),
+ EXYNOS3_ARM_CORE_OPTION(3),
+ EXYNOS3_ARM_COMMON_OPTION,
+ EXYNOS3_TOP_PWR_OPTION,
+ EXYNOS3_CORE_TOP_PWR_OPTION,
+ S5P_CAM_OPTION,
+ S5P_MFC_OPTION,
+ S5P_G3D_OPTION,
+ S5P_LCD0_OPTION,
+ S5P_ISP_OPTION,
+};
+
+static void exynos3250_powerdown_conf_extra(enum sys_powerdown mode)
+{
+ unsigned int i;
+ unsigned int tmp;
+
+ /* Enable only SC_FEEDBACK */
+ for (i = 0; i < ARRAY_SIZE(exynos3250_list_feed); i++) {
+ tmp = pmu_raw_readl(exynos3250_list_feed[i]);
+ tmp &= ~(EXYNOS3_OPTION_USE_SC_COUNTER);
+ tmp |= EXYNOS3_OPTION_USE_SC_FEEDBACK;
+ pmu_raw_writel(tmp, exynos3250_list_feed[i]);
+ }
+
+ if (mode != SYS_SLEEP)
+ return;
+
+ pmu_raw_writel(XUSBXTI_DURATION, EXYNOS3_XUSBXTI_DURATION);
+ pmu_raw_writel(XXTI_DURATION, EXYNOS3_XXTI_DURATION);
+ pmu_raw_writel(EXT_REGULATOR_DURATION, EXYNOS3_EXT_REGULATOR_DURATION);
+ pmu_raw_writel(EXT_REGULATOR_COREBLK_DURATION,
+ EXYNOS3_EXT_REGULATOR_COREBLK_DURATION);
+}
+
static unsigned int const exynos5_list_both_cnt_feed[] = {
EXYNOS5_ARM_CORE0_OPTION,
EXYNOS5_ARM_CORE1_OPTION,
EXYNOS5_TOP_PWR_SYSMEM_OPTION,
};
-static unsigned int const exynos5_list_diable_wfi_wfe[] = {
+static unsigned int const exynos5_list_disable_wfi_wfe[] = {
EXYNOS5_ARM_CORE1_OPTION,
EXYNOS5_FSYS_ARM_OPTION,
EXYNOS5_ISP_ARM_OPTION,
};
-static void exynos5_init_pmu(void)
+static unsigned int const exynos5420_list_disable_pmu_reg[] = {
+ EXYNOS5_CMU_CLKSTOP_GSCL_SYS_PWR_REG,
+ EXYNOS5_CMU_CLKSTOP_ISP_SYS_PWR_REG,
+ EXYNOS5_CMU_CLKSTOP_G3D_SYS_PWR_REG,
+ EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG,
+ EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG,
+ EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG,
+ EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG,
+ EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG,
+ EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG,
+ EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG,
+ EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG,
+ EXYNOS5_CMU_SYSCLK_GSCL_SYS_PWR_REG,
+ EXYNOS5_CMU_SYSCLK_ISP_SYS_PWR_REG,
+ EXYNOS5_CMU_SYSCLK_G3D_SYS_PWR_REG,
+ EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG,
+ EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG,
+ EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG,
+ EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG,
+ EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG,
+ EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG,
+ EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG,
+ EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG,
+ EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG,
+ EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG,
+ EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG,
+ EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG,
+ EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG,
+ EXYNOS5_CMU_RESET_GSCL_SYS_PWR_REG,
+ EXYNOS5_CMU_RESET_ISP_SYS_PWR_REG,
+ EXYNOS5_CMU_RESET_G3D_SYS_PWR_REG,
+ EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG,
+ EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG,
+ EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG,
+ EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG,
+ EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG,
+};
+
+static void exynos5_power_off(void)
+{
+ unsigned int tmp;
+
+ pr_info("Power down.\n");
+ tmp = pmu_raw_readl(EXYNOS_PS_HOLD_CONTROL);
+ tmp ^= (1 << 8);
+ pmu_raw_writel(tmp, EXYNOS_PS_HOLD_CONTROL);
+
+ /* Wait a little so we don't give a false warning below */
+ mdelay(100);
+
+ pr_err("Power down failed, please power off system manually.\n");
+ while (1)
+ ;
+}
+
+void exynos5420_powerdown_conf(enum sys_powerdown mode)
+{
+ u32 this_cluster;
+
+ this_cluster = MPIDR_AFFINITY_LEVEL(read_cpuid_mpidr(), 1);
+
+ /*
+ * set the cluster id to IROM register to ensure that we wake
+ * up with the current cluster.
+ */
+ pmu_raw_writel(this_cluster, EXYNOS_IROM_DATA2);
+}
+
+
+static void exynos5_powerdown_conf(enum sys_powerdown mode)
{
unsigned int i;
unsigned int tmp;
/*
* Enable both SC_FEEDBACK and SC_COUNTER
*/
- for (i = 0 ; i < ARRAY_SIZE(exynos5_list_both_cnt_feed) ; i++) {
+ for (i = 0; i < ARRAY_SIZE(exynos5_list_both_cnt_feed); i++) {
tmp = pmu_raw_readl(exynos5_list_both_cnt_feed[i]);
tmp |= (EXYNOS5_USE_SC_FEEDBACK |
EXYNOS5_USE_SC_COUNTER);
/*
* Disable WFI/WFE on XXX_OPTION
*/
- for (i = 0 ; i < ARRAY_SIZE(exynos5_list_diable_wfi_wfe) ; i++) {
- tmp = pmu_raw_readl(exynos5_list_diable_wfi_wfe[i]);
+ for (i = 0; i < ARRAY_SIZE(exynos5_list_disable_wfi_wfe); i++) {
+ tmp = pmu_raw_readl(exynos5_list_disable_wfi_wfe[i]);
tmp &= ~(EXYNOS5_OPTION_USE_STANDBYWFE |
EXYNOS5_OPTION_USE_STANDBYWFI);
- pmu_raw_writel(tmp, exynos5_list_diable_wfi_wfe[i]);
+ pmu_raw_writel(tmp, exynos5_list_disable_wfi_wfe[i]);
}
}
{
unsigned int i;
- if (soc_is_exynos5250())
- exynos5_init_pmu();
+ const struct exynos_pmu_data *pmu_data = pmu_context->pmu_data;
+
+ if (pmu_data->powerdown_conf)
+ pmu_data->powerdown_conf(mode);
+
+ if (pmu_data->pmu_config) {
+ for (i = 0; (pmu_data->pmu_config[i].offset != PMU_TABLE_END); i++)
+ pmu_raw_writel(pmu_data->pmu_config[i].val[mode],
+ pmu_data->pmu_config[i].offset);
+ }
- for (i = 0; (exynos_pmu_config[i].offset != PMU_TABLE_END) ; i++)
- pmu_raw_writel(exynos_pmu_config[i].val[mode],
- exynos_pmu_config[i].offset);
+ if (pmu_data->powerdown_conf_extra)
+ pmu_data->powerdown_conf_extra(mode);
- if (soc_is_exynos4412()) {
- for (i = 0; exynos4412_pmu_config[i].offset != PMU_TABLE_END ; i++)
- pmu_raw_writel(exynos4412_pmu_config[i].val[mode],
- exynos4412_pmu_config[i].offset);
+ if (pmu_data->pmu_config_extra) {
+ for (i = 0; pmu_data->pmu_config_extra[i].offset != PMU_TABLE_END; i++)
+ pmu_raw_writel(pmu_data->pmu_config_extra[i].val[mode],
+ pmu_data->pmu_config_extra[i].offset);
}
}
-static int __init exynos_pmu_init(void)
+static void exynos3250_pmu_init(void)
+{
+ unsigned int value;
+
+ /*
+ * To prevent from issuing new bus request form L2 memory system
+ * If core status is power down, should be set '1' to L2 power down
+ */
+ value = pmu_raw_readl(EXYNOS3_ARM_COMMON_OPTION);
+ value |= EXYNOS3_OPTION_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
+ pmu_raw_writel(value, EXYNOS3_ARM_COMMON_OPTION);
+
+ /* Enable USE_STANDBY_WFI for all CORE */
+ pmu_raw_writel(S5P_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION);
+
+ /*
+ * Set PSHOLD port for output high
+ */
+ value = pmu_raw_readl(S5P_PS_HOLD_CONTROL);
+ value |= S5P_PS_HOLD_OUTPUT_HIGH;
+ pmu_raw_writel(value, S5P_PS_HOLD_CONTROL);
+
+ /*
+ * Enable signal for PSHOLD port
+ */
+ value = pmu_raw_readl(S5P_PS_HOLD_CONTROL);
+ value |= S5P_PS_HOLD_EN;
+ pmu_raw_writel(value, S5P_PS_HOLD_CONTROL);
+}
+
+static void exynos5250_pmu_init(void)
{
unsigned int value;
+ /*
+ * When SYS_WDTRESET is set, watchdog timer reset request
+ * is ignored by power management unit.
+ */
+ value = pmu_raw_readl(EXYNOS5_AUTO_WDTRESET_DISABLE);
+ value &= ~EXYNOS5_SYS_WDTRESET;
+ pmu_raw_writel(value, EXYNOS5_AUTO_WDTRESET_DISABLE);
+
+ value = pmu_raw_readl(EXYNOS5_MASK_WDTRESET_REQUEST);
+ value &= ~EXYNOS5_SYS_WDTRESET;
+ pmu_raw_writel(value, EXYNOS5_MASK_WDTRESET_REQUEST);
+}
+
+static void exynos5420_pmu_init(void)
+{
+ unsigned int value;
+ int i;
+
+ /*
+ * Set the CMU_RESET, CMU_SYSCLK and CMU_CLKSTOP registers
+ * for local power blocks to Low initially as per Table 8-4:
+ * "System-Level Power-Down Configuration Registers".
+ */
+ for (i = 0; i < ARRAY_SIZE(exynos5420_list_disable_pmu_reg); i++)
+ pmu_raw_writel(0, exynos5420_list_disable_pmu_reg[i]);
+
+ /* Enable USE_STANDBY_WFI for all CORE */
+ pmu_raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL, S5P_CENTRAL_SEQ_OPTION);
+
+ value = pmu_raw_readl(EXYNOS_L2_OPTION(0));
+ value &= ~EXYNOS5_USE_RETENTION;
+ pmu_raw_writel(value, EXYNOS_L2_OPTION(0));
+
+ value = pmu_raw_readl(EXYNOS_L2_OPTION(1));
+ value &= ~EXYNOS5_USE_RETENTION;
+ pmu_raw_writel(value, EXYNOS_L2_OPTION(1));
+
+ /*
+ * If L2_COMMON is turned off, clocks related to ATB async
+ * bridge are gated. Thus, when ISP power is gated, LPI
+ * may get stuck.
+ */
+ value = pmu_raw_readl(EXYNOS5420_LPI_MASK);
+ value |= EXYNOS5420_ATB_ISP_ARM;
+ pmu_raw_writel(value, EXYNOS5420_LPI_MASK);
+
+ value = pmu_raw_readl(EXYNOS5420_LPI_MASK1);
+ value |= EXYNOS5420_ATB_KFC;
+ pmu_raw_writel(value, EXYNOS5420_LPI_MASK1);
+
+ /* Prevent issue of new bus request from L2 memory */
+ value = pmu_raw_readl(EXYNOS5420_ARM_COMMON_OPTION);
+ value |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
+ pmu_raw_writel(value, EXYNOS5420_ARM_COMMON_OPTION);
+
+ value = pmu_raw_readl(EXYNOS5420_KFC_COMMON_OPTION);
+ value |= EXYNOS5_SKIP_DEACTIVATE_ACEACP_IN_PWDN;
+ pmu_raw_writel(value, EXYNOS5420_KFC_COMMON_OPTION);
+
+ /* This setting is to reduce suspend/resume time */
+ pmu_raw_writel(DUR_WAIT_RESET, EXYNOS5420_LOGIC_RESET_DURATION3);
+
+ /* Serialized CPU wakeup of Eagle */
+ pmu_raw_writel(SPREAD_ENABLE, EXYNOS5420_ARM_INTR_SPREAD_ENABLE);
+
+ pmu_raw_writel(SPREAD_USE_STANDWFI,
+ EXYNOS5420_ARM_INTR_SPREAD_USE_STANDBYWFI);
+
+ pmu_raw_writel(0x1, EXYNOS5420_UP_SCHEDULER);
+
+ pm_power_off = exynos5_power_off;
+ pr_info("EXYNOS5420 PMU initialized\n");
+}
+
+static int pmu_restart_notify(struct notifier_block *this,
+ unsigned long code, void *unused)
+{
+ pmu_raw_writel(0x1, EXYNOS_SWRESET);
+
+ return NOTIFY_DONE;
+}
+
+static const struct exynos_pmu_data exynos3250_pmu_data = {
+ .pmu_config = exynos3250_pmu_config,
+ .pmu_init = exynos3250_pmu_init,
+ .powerdown_conf_extra = exynos3250_powerdown_conf_extra,
+};
- exynos_pmu_config = exynos4210_pmu_config;
-
- if (soc_is_exynos4210()) {
- exynos_pmu_config = exynos4210_pmu_config;
- pr_info("EXYNOS4210 PMU Initialize\n");
- } else if (soc_is_exynos4212() || soc_is_exynos4412()) {
- exynos_pmu_config = exynos4x12_pmu_config;
- pr_info("EXYNOS4x12 PMU Initialize\n");
- } else if (soc_is_exynos5250()) {
- /*
- * When SYS_WDTRESET is set, watchdog timer reset request
- * is ignored by power management unit.
- */
- value = pmu_raw_readl(EXYNOS5_AUTO_WDTRESET_DISABLE);
- value &= ~EXYNOS5_SYS_WDTRESET;
- pmu_raw_writel(value, EXYNOS5_AUTO_WDTRESET_DISABLE);
-
- value = pmu_raw_readl(EXYNOS5_MASK_WDTRESET_REQUEST);
- value &= ~EXYNOS5_SYS_WDTRESET;
- pmu_raw_writel(value, EXYNOS5_MASK_WDTRESET_REQUEST);
-
- exynos_pmu_config = exynos5250_pmu_config;
- pr_info("EXYNOS5250 PMU Initialize\n");
- } else {
- pr_info("EXYNOS: PMU not supported\n");
+static const struct exynos_pmu_data exynos4210_pmu_data = {
+ .pmu_config = exynos4210_pmu_config,
+};
+
+static const struct exynos_pmu_data exynos4212_pmu_data = {
+ .pmu_config = exynos4x12_pmu_config,
+};
+
+static const struct exynos_pmu_data exynos4412_pmu_data = {
+ .pmu_config = exynos4x12_pmu_config,
+ .pmu_config_extra = exynos4412_pmu_config,
+};
+
+static const struct exynos_pmu_data exynos5250_pmu_data = {
+ .pmu_config = exynos5250_pmu_config,
+ .pmu_init = exynos5250_pmu_init,
+ .powerdown_conf = exynos5_powerdown_conf,
+};
+
+static struct exynos_pmu_data exynos5420_pmu_data = {
+ .pmu_config = exynos5420_pmu_config,
+ .pmu_init = exynos5420_pmu_init,
+ .powerdown_conf = exynos5420_powerdown_conf,
+};
+
+/*
+ * PMU platform driver and devicetree bindings.
+ */
+static const struct of_device_id exynos_pmu_of_device_ids[] = {
+ {
+ .compatible = "samsung,exynos3250-pmu",
+ .data = &exynos3250_pmu_data,
+ }, {
+ .compatible = "samsung,exynos4210-pmu",
+ .data = &exynos4210_pmu_data,
+ }, {
+ .compatible = "samsung,exynos4212-pmu",
+ .data = &exynos4212_pmu_data,
+ }, {
+ .compatible = "samsung,exynos4412-pmu",
+ .data = &exynos4412_pmu_data,
+ }, {
+ .compatible = "samsung,exynos5250-pmu",
+ .data = &exynos5250_pmu_data,
+ }, {
+ .compatible = "samsung,exynos5420-pmu",
+ .data = &exynos5420_pmu_data,
+ },
+ { /*sentinel*/ },
+};
+
+/*
+ * Exynos PMU restart notifier, handles restart functionality
+ */
+static struct notifier_block pmu_restart_handler = {
+ .notifier_call = pmu_restart_notify,
+ .priority = 128,
+};
+
+static int exynos_pmu_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ int ret;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ pmu_base_addr = devm_ioremap_resource(dev, res);
+ if (IS_ERR(pmu_base_addr))
+ return PTR_ERR(pmu_base_addr);
+
+ pmu_context = devm_kzalloc(&pdev->dev,
+ sizeof(struct exynos_pmu_context),
+ GFP_KERNEL);
+ if (!pmu_context) {
+ dev_err(dev, "Cannot allocate memory.\n");
+ return -ENOMEM;
}
+ pmu_context->dev = dev;
+
+ match = of_match_node(exynos_pmu_of_device_ids, dev->of_node);
+
+ pmu_context->pmu_data = match->data;
+
+ if (pmu_context->pmu_data->pmu_init)
+ pmu_context->pmu_data->pmu_init();
+
+ platform_set_drvdata(pdev, pmu_context);
+ ret = register_restart_handler(&pmu_restart_handler);
+ if (ret)
+ dev_warn(dev, "can't register restart handler err=%d\n", ret);
+
+ dev_dbg(dev, "Exynos PMU Driver probe done\n");
return 0;
}
-arch_initcall(exynos_pmu_init);
+
+static struct platform_driver exynos_pmu_driver = {
+ .driver = {
+ .name = "exynos-pmu",
+ .owner = THIS_MODULE,
+ .of_match_table = exynos_pmu_of_device_ids,
+ },
+ .probe = exynos_pmu_probe,
+};
+
+static int __init exynos_pmu_init(void)
+{
+ return platform_driver_register(&exynos_pmu_driver);
+
+}
+postcore_initcall(exynos_pmu_init);
#define S5P_CENTRAL_SEQ_OPTION 0x0208
#define S5P_USE_STANDBY_WFI0 (1 << 16)
+#define S5P_USE_STANDBY_WFI1 (1 << 17)
+#define S5P_USE_STANDBY_WFI2 (1 << 19)
+#define S5P_USE_STANDBY_WFI3 (1 << 20)
#define S5P_USE_STANDBY_WFE0 (1 << 24)
+#define S5P_USE_STANDBY_WFE1 (1 << 25)
+#define S5P_USE_STANDBY_WFE2 (1 << 27)
+#define S5P_USE_STANDBY_WFE3 (1 << 28)
+#define S5P_USE_STANDBY_WFI_ALL \
+ (S5P_USE_STANDBY_WFI0 | S5P_USE_STANDBY_WFI1 | \
+ S5P_USE_STANDBY_WFI2 | S5P_USE_STANDBY_WFI3 | \
+ S5P_USE_STANDBY_WFE0 | S5P_USE_STANDBY_WFE1 | \
+ S5P_USE_STANDBY_WFE2 | S5P_USE_STANDBY_WFE3)
+
+#define S5P_USE_DELAYED_RESET_ASSERTION BIT(12)
+
+#define EXYNOS_CORE_PO_RESET(n) ((1 << 4) << n)
+#define EXYNOS_WAKEUP_FROM_LOWPWR (1 << 28)
#define EXYNOS_SWRESET 0x0400
#define EXYNOS5440_SWRESET 0x00C4
#define S5P_INFORM7 0x081C
#define S5P_PMU_SPARE3 0x090C
+#define EXYNOS_IROM_DATA2 0x0988
#define S5P_ARM_CORE0_LOWPWR 0x1000
#define S5P_DIS_IRQ_CORE0 0x1004
#define S5P_DIS_IRQ_CENTRAL0 0x1008
(EXYNOS_ARM_CORE0_CONFIGURATION + (0x80 * (_nr)))
#define EXYNOS_ARM_CORE_STATUS(_nr) \
(EXYNOS_ARM_CORE_CONFIGURATION(_nr) + 0x4)
+#define EXYNOS_ARM_CORE_OPTION(_nr) \
+ (EXYNOS_ARM_CORE_CONFIGURATION(_nr) + 0x8)
#define EXYNOS_ARM_COMMON_CONFIGURATION 0x2500
#define EXYNOS_COMMON_CONFIGURATION(_nr) \
#define EXYNOS_COMMON_OPTION(_nr) \
(EXYNOS_COMMON_CONFIGURATION(_nr) + 0x8)
+#define EXYNOS_CORE_LOCAL_PWR_EN 0x3
+
+#define EXYNOS_ARM_COMMON_STATUS 0x2504
+#define EXYNOS_COMMON_OPTION(_nr) \
+ (EXYNOS_COMMON_CONFIGURATION(_nr) + 0x8)
+
+#define EXYNOS_ARM_L2_CONFIGURATION 0x2600
+#define EXYNOS_L2_CONFIGURATION(_nr) \
+ (EXYNOS_ARM_L2_CONFIGURATION + ((_nr) * 0x80))
+#define EXYNOS_L2_STATUS(_nr) \
+ (EXYNOS_L2_CONFIGURATION(_nr) + 0x4)
+#define EXYNOS_L2_OPTION(_nr) \
+ (EXYNOS_L2_CONFIGURATION(_nr) + 0x8)
+#define EXYNOS_L2_COMMON_PWR_EN 0x3
+
+#define EXYNOS_ARM_CORE_X_STATUS_OFFSET 0x4
+
+#define EXYNOS5_APLL_SYSCLK_CONFIGURATION 0x2A00
+#define EXYNOS5_APLL_SYSCLK_STATUS 0x2A04
+
+#define EXYNOS5_ARM_L2_OPTION 0x2608
+#define EXYNOS5_USE_RETENTION BIT(4)
+
+#define EXYNOS5_L2RSTDISABLE_VALUE BIT(3)
+
#define S5P_PAD_RET_MAUDIO_OPTION 0x3028
#define S5P_PAD_RET_GPIO_OPTION 0x3108
#define S5P_PAD_RET_UART_OPTION 0x3128
#define S5P_PAD_RET_EBIA_OPTION 0x3188
#define S5P_PAD_RET_EBIB_OPTION 0x31A8
+#define S5P_PS_HOLD_CONTROL 0x330C
+#define S5P_PS_HOLD_EN (1 << 31)
+#define S5P_PS_HOLD_OUTPUT_HIGH (3 << 8)
+
+#define S5P_CAM_OPTION 0x3C08
+#define S5P_MFC_OPTION 0x3C48
+#define S5P_G3D_OPTION 0x3C68
+#define S5P_LCD0_OPTION 0x3C88
+#define S5P_LCD1_OPTION 0x3CA8
+#define S5P_ISP_OPTION S5P_LCD1_OPTION
+
#define S5P_CORE_LOCAL_PWR_EN 0x3
+#define S5P_CORE_WAKEUP_FROM_LOCAL_CFG (0x3 << 8)
/* Only for EXYNOS4210 */
#define S5P_CMU_CLKSTOP_LCD1_LOWPWR 0x1154
#define S5P_DIS_IRQ_CORE3 0x1034
#define S5P_DIS_IRQ_CENTRAL3 0x1038
+/* Only for EXYNOS3XXX */
+#define EXYNOS3_ARM_CORE0_SYS_PWR_REG 0x1000
+#define EXYNOS3_DIS_IRQ_ARM_CORE0_LOCAL_SYS_PWR_REG 0x1004
+#define EXYNOS3_DIS_IRQ_ARM_CORE0_CENTRAL_SYS_PWR_REG 0x1008
+#define EXYNOS3_ARM_CORE1_SYS_PWR_REG 0x1010
+#define EXYNOS3_DIS_IRQ_ARM_CORE1_LOCAL_SYS_PWR_REG 0x1014
+#define EXYNOS3_DIS_IRQ_ARM_CORE1_CENTRAL_SYS_PWR_REG 0x1018
+#define EXYNOS3_ISP_ARM_SYS_PWR_REG 0x1050
+#define EXYNOS3_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG 0x1054
+#define EXYNOS3_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG 0x1058
+#define EXYNOS3_ARM_COMMON_SYS_PWR_REG 0x1080
+#define EXYNOS3_ARM_L2_SYS_PWR_REG 0x10C0
+#define EXYNOS3_CMU_ACLKSTOP_SYS_PWR_REG 0x1100
+#define EXYNOS3_CMU_SCLKSTOP_SYS_PWR_REG 0x1104
+#define EXYNOS3_CMU_RESET_SYS_PWR_REG 0x110C
+#define EXYNOS3_CMU_ACLKSTOP_COREBLK_SYS_PWR_REG 0x1110
+#define EXYNOS3_CMU_SCLKSTOP_COREBLK_SYS_PWR_REG 0x1114
+#define EXYNOS3_CMU_RESET_COREBLK_SYS_PWR_REG 0x111C
+#define EXYNOS3_APLL_SYSCLK_SYS_PWR_REG 0x1120
+#define EXYNOS3_MPLL_SYSCLK_SYS_PWR_REG 0x1124
+#define EXYNOS3_VPLL_SYSCLK_SYS_PWR_REG 0x1128
+#define EXYNOS3_EPLL_SYSCLK_SYS_PWR_REG 0x112C
+#define EXYNOS3_MPLLUSER_SYSCLK_SYS_PWR_REG 0x1130
+#define EXYNOS3_BPLLUSER_SYSCLK_SYS_PWR_REG 0x1134
+#define EXYNOS3_EPLLUSER_SYSCLK_SYS_PWR_REG 0x1138
+#define EXYNOS3_CMU_CLKSTOP_CAM_SYS_PWR_REG 0x1140
+#define EXYNOS3_CMU_CLKSTOP_MFC_SYS_PWR_REG 0x1148
+#define EXYNOS3_CMU_CLKSTOP_G3D_SYS_PWR_REG 0x114C
+#define EXYNOS3_CMU_CLKSTOP_LCD0_SYS_PWR_REG 0x1150
+#define EXYNOS3_CMU_CLKSTOP_ISP_SYS_PWR_REG 0x1154
+#define EXYNOS3_CMU_CLKSTOP_MAUDIO_SYS_PWR_REG 0x1158
+#define EXYNOS3_CMU_RESET_CAM_SYS_PWR_REG 0x1160
+#define EXYNOS3_CMU_RESET_MFC_SYS_PWR_REG 0x1168
+#define EXYNOS3_CMU_RESET_G3D_SYS_PWR_REG 0x116C
+#define EXYNOS3_CMU_RESET_LCD0_SYS_PWR_REG 0x1170
+#define EXYNOS3_CMU_RESET_ISP_SYS_PWR_REG 0x1174
+#define EXYNOS3_CMU_RESET_MAUDIO_SYS_PWR_REG 0x1178
+#define EXYNOS3_TOP_BUS_SYS_PWR_REG 0x1180
+#define EXYNOS3_TOP_RETENTION_SYS_PWR_REG 0x1184
+#define EXYNOS3_TOP_PWR_SYS_PWR_REG 0x1188
+#define EXYNOS3_TOP_BUS_COREBLK_SYS_PWR_REG 0x1190
+#define EXYNOS3_TOP_RETENTION_COREBLK_SYS_PWR_REG 0x1194
+#define EXYNOS3_TOP_PWR_COREBLK_SYS_PWR_REG 0x1198
+#define EXYNOS3_LOGIC_RESET_SYS_PWR_REG 0x11A0
+#define EXYNOS3_OSCCLK_GATE_SYS_PWR_REG 0x11A4
+#define EXYNOS3_LOGIC_RESET_COREBLK_SYS_PWR_REG 0x11B0
+#define EXYNOS3_OSCCLK_GATE_COREBLK_SYS_PWR_REG 0x11B4
+#define EXYNOS3_PAD_RETENTION_DRAM_SYS_PWR_REG 0x1200
+#define EXYNOS3_PAD_RETENTION_MAUDIO_SYS_PWR_REG 0x1204
+#define EXYNOS3_PAD_RETENTION_SPI_SYS_PWR_REG 0x1208
+#define EXYNOS3_PAD_RETENTION_MMC2_SYS_PWR_REG 0x1218
+#define EXYNOS3_PAD_RETENTION_GPIO_SYS_PWR_REG 0x1220
+#define EXYNOS3_PAD_RETENTION_UART_SYS_PWR_REG 0x1224
+#define EXYNOS3_PAD_RETENTION_MMC0_SYS_PWR_REG 0x1228
+#define EXYNOS3_PAD_RETENTION_MMC1_SYS_PWR_REG 0x122C
+#define EXYNOS3_PAD_RETENTION_EBIA_SYS_PWR_REG 0x1230
+#define EXYNOS3_PAD_RETENTION_EBIB_SYS_PWR_REG 0x1234
+#define EXYNOS3_PAD_RETENTION_JTAG_SYS_PWR_REG 0x1238
+#define EXYNOS3_PAD_ISOLATION_SYS_PWR_REG 0x1240
+#define EXYNOS3_PAD_ALV_SEL_SYS_PWR_REG 0x1260
+#define EXYNOS3_XUSBXTI_SYS_PWR_REG 0x1280
+#define EXYNOS3_XXTI_SYS_PWR_REG 0x1284
+#define EXYNOS3_EXT_REGULATOR_SYS_PWR_REG 0x12C0
+#define EXYNOS3_EXT_REGULATOR_COREBLK_SYS_PWR_REG 0x12C4
+#define EXYNOS3_GPIO_MODE_SYS_PWR_REG 0x1300
+#define EXYNOS3_GPIO_MODE_MAUDIO_SYS_PWR_REG 0x1340
+#define EXYNOS3_TOP_ASB_RESET_SYS_PWR_REG 0x1344
+#define EXYNOS3_TOP_ASB_ISOLATION_SYS_PWR_REG 0x1348
+#define EXYNOS3_TOP_ASB_RESET_COREBLK_SYS_PWR_REG 0x1350
+#define EXYNOS3_TOP_ASB_ISOLATION_COREBLK_SYS_PWR_REG 0x1354
+#define EXYNOS3_CAM_SYS_PWR_REG 0x1380
+#define EXYNOS3_MFC_SYS_PWR_REG 0x1388
+#define EXYNOS3_G3D_SYS_PWR_REG 0x138C
+#define EXYNOS3_LCD0_SYS_PWR_REG 0x1390
+#define EXYNOS3_ISP_SYS_PWR_REG 0x1394
+#define EXYNOS3_MAUDIO_SYS_PWR_REG 0x1398
+#define EXYNOS3_DRAM_FREQ_DOWN_SYS_PWR_REG 0x13B0
+#define EXYNOS3_DDRPHY_DLLOFF_SYS_PWR_REG 0x13B4
+#define EXYNOS3_CMU_SYSCLK_ISP_SYS_PWR_REG 0x13B8
+#define EXYNOS3_LPDDR_PHY_DLL_LOCK_SYS_PWR_REG 0x13C0
+#define EXYNOS3_BPLL_SYSCLK_SYS_PWR_REG 0x13C4
+#define EXYNOS3_UPLL_SYSCLK_SYS_PWR_REG 0x13C8
+
+#define EXYNOS3_ARM_CORE0_OPTION 0x2008
+#define EXYNOS3_ARM_CORE_OPTION(_nr) \
+ (EXYNOS3_ARM_CORE0_OPTION + ((_nr) * 0x80))
+
+#define EXYNOS3_ARM_COMMON_OPTION 0x2408
+#define EXYNOS3_TOP_PWR_OPTION 0x2C48
+#define EXYNOS3_CORE_TOP_PWR_OPTION 0x2CA8
+#define EXYNOS3_XUSBXTI_DURATION 0x341C
+#define EXYNOS3_XXTI_DURATION 0x343C
+#define EXYNOS3_EXT_REGULATOR_DURATION 0x361C
+#define EXYNOS3_EXT_REGULATOR_COREBLK_DURATION 0x363C
+#define XUSBXTI_DURATION 0x00000BB8
+#define XXTI_DURATION XUSBXTI_DURATION
+#define EXT_REGULATOR_DURATION 0x00001D4C
+#define EXT_REGULATOR_COREBLK_DURATION EXT_REGULATOR_DURATION
+
+/* for XXX_OPTION */
+#define EXYNOS3_OPTION_USE_SC_COUNTER (1 << 0)
+#define EXYNOS3_OPTION_USE_SC_FEEDBACK (1 << 1)
+#define EXYNOS3_OPTION_SKIP_DEACTIVATE_ACEACP_IN_PWDN (1 << 7)
+
/* For EXYNOS5 */
#define EXYNOS5_AUTO_WDTRESET_DISABLE 0x0408
#define EXYNOS5_MASK_WDTRESET_REQUEST 0x040C
+#define EXYNOS5_USE_RETENTION BIT(4)
#define EXYNOS5_SYS_WDTRESET (1 << 20)
#define EXYNOS5_ARM_CORE0_SYS_PWR_REG 0x1000
+ MPIDR_AFFINITY_LEVEL(mpidr, 0));
}
+/* Only for EXYNOS5420 */
+#define EXYNOS5420_ISP_ARM_OPTION 0x2488
+#define EXYNOS5420_L2RSTDISABLE_VALUE BIT(3)
+
+#define EXYNOS5420_LPI_MASK 0x0004
+#define EXYNOS5420_LPI_MASK1 0x0008
+#define EXYNOS5420_UFS BIT(8)
+#define EXYNOS5420_ATB_KFC BIT(13)
+#define EXYNOS5420_ATB_ISP_ARM BIT(19)
+#define EXYNOS5420_EMULATION BIT(31)
+#define ATB_ISP_ARM BIT(12)
+#define ATB_KFC BIT(13)
+#define ATB_NOC BIT(14)
+
+#define EXYNOS5420_ARM_INTR_SPREAD_ENABLE 0x0100
+#define EXYNOS5420_ARM_INTR_SPREAD_USE_STANDBYWFI 0x0104
+#define EXYNOS5420_UP_SCHEDULER 0x0120
+#define SPREAD_ENABLE 0xF
+#define SPREAD_USE_STANDWFI 0xF
+
+#define EXYNOS5420_BB_CON1 0x0784
+#define EXYNOS5420_BB_SEL_EN BIT(31)
+#define EXYNOS5420_BB_PMOS_EN BIT(7)
+#define EXYNOS5420_BB_1300X 0XF
+
+#define EXYNOS5420_ARM_CORE2_SYS_PWR_REG 0x1020
+#define EXYNOS5420_DIS_IRQ_ARM_CORE2_LOCAL_SYS_PWR_REG 0x1024
+#define EXYNOS5420_DIS_IRQ_ARM_CORE2_CENTRAL_SYS_PWR_REG 0x1028
+#define EXYNOS5420_ARM_CORE3_SYS_PWR_REG 0x1030
+#define EXYNOS5420_DIS_IRQ_ARM_CORE3_LOCAL_SYS_PWR_REG 0x1034
+#define EXYNOS5420_DIS_IRQ_ARM_CORE3_CENTRAL_SYS_PWR_REG 0x1038
+#define EXYNOS5420_KFC_CORE0_SYS_PWR_REG 0x1040
+#define EXYNOS5420_DIS_IRQ_KFC_CORE0_LOCAL_SYS_PWR_REG 0x1044
+#define EXYNOS5420_DIS_IRQ_KFC_CORE0_CENTRAL_SYS_PWR_REG 0x1048
+#define EXYNOS5420_KFC_CORE1_SYS_PWR_REG 0x1050
+#define EXYNOS5420_DIS_IRQ_KFC_CORE1_LOCAL_SYS_PWR_REG 0x1054
+#define EXYNOS5420_DIS_IRQ_KFC_CORE1_CENTRAL_SYS_PWR_REG 0x1058
+#define EXYNOS5420_KFC_CORE2_SYS_PWR_REG 0x1060
+#define EXYNOS5420_DIS_IRQ_KFC_CORE2_LOCAL_SYS_PWR_REG 0x1064
+#define EXYNOS5420_DIS_IRQ_KFC_CORE2_CENTRAL_SYS_PWR_REG 0x1068
+#define EXYNOS5420_KFC_CORE3_SYS_PWR_REG 0x1070
+#define EXYNOS5420_DIS_IRQ_KFC_CORE3_LOCAL_SYS_PWR_REG 0x1074
+#define EXYNOS5420_DIS_IRQ_KFC_CORE3_CENTRAL_SYS_PWR_REG 0x1078
+#define EXYNOS5420_ISP_ARM_SYS_PWR_REG 0x1090
+#define EXYNOS5420_DIS_IRQ_ISP_ARM_LOCAL_SYS_PWR_REG 0x1094
+#define EXYNOS5420_DIS_IRQ_ISP_ARM_CENTRAL_SYS_PWR_REG 0x1098
+#define EXYNOS5420_ARM_COMMON_SYS_PWR_REG 0x10A0
+#define EXYNOS5420_KFC_COMMON_SYS_PWR_REG 0x10B0
+#define EXYNOS5420_KFC_L2_SYS_PWR_REG 0x10D0
+#define EXYNOS5420_DPLL_SYSCLK_SYS_PWR_REG 0x1158
+#define EXYNOS5420_IPLL_SYSCLK_SYS_PWR_REG 0x115C
+#define EXYNOS5420_KPLL_SYSCLK_SYS_PWR_REG 0x1160
+#define EXYNOS5420_RPLL_SYSCLK_SYS_PWR_REG 0x1174
+#define EXYNOS5420_SPLL_SYSCLK_SYS_PWR_REG 0x1178
+#define EXYNOS5420_INTRAM_MEM_SYS_PWR_REG 0x11B8
+#define EXYNOS5420_INTROM_MEM_SYS_PWR_REG 0x11BC
+#define EXYNOS5420_ONENANDXL_MEM_SYS_PWR 0x11C0
+#define EXYNOS5420_USBDEV_MEM_SYS_PWR 0x11CC
+#define EXYNOS5420_USBDEV1_MEM_SYS_PWR 0x11D0
+#define EXYNOS5420_SDMMC_MEM_SYS_PWR 0x11D4
+#define EXYNOS5420_CSSYS_MEM_SYS_PWR 0x11D8
+#define EXYNOS5420_SECSS_MEM_SYS_PWR 0x11DC
+#define EXYNOS5420_ROTATOR_MEM_SYS_PWR 0x11E0
+#define EXYNOS5420_INTRAM_MEM_SYS_PWR 0x11E4
+#define EXYNOS5420_INTROM_MEM_SYS_PWR 0x11E8
+#define EXYNOS5420_PAD_RETENTION_JTAG_SYS_PWR_REG 0x1208
+#define EXYNOS5420_PAD_RETENTION_DRAM_SYS_PWR_REG 0x1210
+#define EXYNOS5420_PAD_RETENTION_UART_SYS_PWR_REG 0x1214
+#define EXYNOS5420_PAD_RETENTION_MMC0_SYS_PWR_REG 0x1218
+#define EXYNOS5420_PAD_RETENTION_MMC1_SYS_PWR_REG 0x121C
+#define EXYNOS5420_PAD_RETENTION_MMC2_SYS_PWR_REG 0x1220
+#define EXYNOS5420_PAD_RETENTION_HSI_SYS_PWR_REG 0x1224
+#define EXYNOS5420_PAD_RETENTION_EBIA_SYS_PWR_REG 0x1228
+#define EXYNOS5420_PAD_RETENTION_EBIB_SYS_PWR_REG 0x122C
+#define EXYNOS5420_PAD_RETENTION_SPI_SYS_PWR_REG 0x1230
+#define EXYNOS5420_PAD_RETENTION_DRAM_COREBLK_SYS_PWR_REG 0x1234
+#define EXYNOS5420_DISP1_SYS_PWR_REG 0x1410
+#define EXYNOS5420_MAU_SYS_PWR_REG 0x1414
+#define EXYNOS5420_G2D_SYS_PWR_REG 0x1418
+#define EXYNOS5420_MSC_SYS_PWR_REG 0x141C
+#define EXYNOS5420_FSYS_SYS_PWR_REG 0x1420
+#define EXYNOS5420_FSYS2_SYS_PWR_REG 0x1424
+#define EXYNOS5420_PSGEN_SYS_PWR_REG 0x1428
+#define EXYNOS5420_PERIC_SYS_PWR_REG 0x142C
+#define EXYNOS5420_WCORE_SYS_PWR_REG 0x1430
+#define EXYNOS5420_CMU_CLKSTOP_DISP1_SYS_PWR_REG 0x1490
+#define EXYNOS5420_CMU_CLKSTOP_MAU_SYS_PWR_REG 0x1494
+#define EXYNOS5420_CMU_CLKSTOP_G2D_SYS_PWR_REG 0x1498
+#define EXYNOS5420_CMU_CLKSTOP_MSC_SYS_PWR_REG 0x149C
+#define EXYNOS5420_CMU_CLKSTOP_FSYS_SYS_PWR_REG 0x14A0
+#define EXYNOS5420_CMU_CLKSTOP_FSYS2_SYS_PWR_REG 0x14A4
+#define EXYNOS5420_CMU_CLKSTOP_PSGEN_SYS_PWR_REG 0x14A8
+#define EXYNOS5420_CMU_CLKSTOP_PERIC_SYS_PWR_REG 0x14AC
+#define EXYNOS5420_CMU_CLKSTOP_WCORE_SYS_PWR_REG 0x14B0
+#define EXYNOS5420_CMU_SYSCLK_TOPPWR_SYS_PWR_REG 0x14BC
+#define EXYNOS5420_CMU_SYSCLK_DISP1_SYS_PWR_REG 0x14D0
+#define EXYNOS5420_CMU_SYSCLK_MAU_SYS_PWR_REG 0x14D4
+#define EXYNOS5420_CMU_SYSCLK_G2D_SYS_PWR_REG 0x14D8
+#define EXYNOS5420_CMU_SYSCLK_MSC_SYS_PWR_REG 0x14DC
+#define EXYNOS5420_CMU_SYSCLK_FSYS_SYS_PWR_REG 0x14E0
+#define EXYNOS5420_CMU_SYSCLK_FSYS2_SYS_PWR_REG 0x14E4
+#define EXYNOS5420_CMU_SYSCLK_PSGEN_SYS_PWR_REG 0x14E8
+#define EXYNOS5420_CMU_SYSCLK_PERIC_SYS_PWR_REG 0x14EC
+#define EXYNOS5420_CMU_SYSCLK_WCORE_SYS_PWR_REG 0x14F0
+#define EXYNOS5420_CMU_SYSCLK_SYSMEM_TOPPWR_SYS_PWR_REG 0x14F4
+#define EXYNOS5420_CMU_RESET_FSYS2_SYS_PWR_REG 0x1570
+#define EXYNOS5420_CMU_RESET_PSGEN_SYS_PWR_REG 0x1574
+#define EXYNOS5420_CMU_RESET_PERIC_SYS_PWR_REG 0x1578
+#define EXYNOS5420_CMU_RESET_WCORE_SYS_PWR_REG 0x157C
+#define EXYNOS5420_CMU_RESET_DISP1_SYS_PWR_REG 0x1590
+#define EXYNOS5420_CMU_RESET_MAU_SYS_PWR_REG 0x1594
+#define EXYNOS5420_CMU_RESET_G2D_SYS_PWR_REG 0x1598
+#define EXYNOS5420_CMU_RESET_MSC_SYS_PWR_REG 0x159C
+#define EXYNOS5420_CMU_RESET_FSYS_SYS_PWR_REG 0x15A0
+#define EXYNOS5420_SFR_AXI_CGDIS1 0x15E4
+#define EXYNOS_ARM_CORE2_CONFIGURATION 0x2100
+#define EXYNOS5420_ARM_CORE2_OPTION 0x2108
+#define EXYNOS_ARM_CORE3_CONFIGURATION 0x2180
+#define EXYNOS5420_ARM_CORE3_OPTION 0x2188
+#define EXYNOS5420_ARM_COMMON_STATUS 0x2504
+#define EXYNOS5420_ARM_COMMON_OPTION 0x2508
+#define EXYNOS5420_KFC_COMMON_STATUS 0x2584
+#define EXYNOS5420_KFC_COMMON_OPTION 0x2588
+#define EXYNOS5420_LOGIC_RESET_DURATION3 0x2D1C
+
+#define EXYNOS5420_PAD_RET_GPIO_OPTION 0x30C8
+#define EXYNOS5420_PAD_RET_UART_OPTION 0x30E8
+#define EXYNOS5420_PAD_RET_MMCA_OPTION 0x3108
+#define EXYNOS5420_PAD_RET_MMCB_OPTION 0x3128
+#define EXYNOS5420_PAD_RET_MMCC_OPTION 0x3148
+#define EXYNOS5420_PAD_RET_HSI_OPTION 0x3168
+#define EXYNOS5420_PAD_RET_SPI_OPTION 0x31C8
+#define EXYNOS5420_PAD_RET_DRAM_COREBLK_OPTION 0x31E8
+#define EXYNOS_PAD_RET_DRAM_OPTION 0x3008
+#define EXYNOS_PAD_RET_MAUDIO_OPTION 0x3028
+#define EXYNOS_PAD_RET_JTAG_OPTION 0x3048
+#define EXYNOS_PAD_RET_GPIO_OPTION 0x3108
+#define EXYNOS_PAD_RET_UART_OPTION 0x3128
+#define EXYNOS_PAD_RET_MMCA_OPTION 0x3148
+#define EXYNOS_PAD_RET_MMCB_OPTION 0x3168
+#define EXYNOS_PAD_RET_EBIA_OPTION 0x3188
+#define EXYNOS_PAD_RET_EBIB_OPTION 0x31A8
+
+#define EXYNOS_PS_HOLD_CONTROL 0x330C
+
+/* For SYS_PWR_REG */
+#define EXYNOS_SYS_PWR_CFG BIT(0)
+
+#define EXYNOS5420_MFC_CONFIGURATION 0x4060
+#define EXYNOS5420_MFC_STATUS 0x4064
+#define EXYNOS5420_MFC_OPTION 0x4068
+#define EXYNOS5420_G3D_CONFIGURATION 0x4080
+#define EXYNOS5420_G3D_STATUS 0x4084
+#define EXYNOS5420_G3D_OPTION 0x4088
+#define EXYNOS5420_DISP0_CONFIGURATION 0x40A0
+#define EXYNOS5420_DISP0_STATUS 0x40A4
+#define EXYNOS5420_DISP0_OPTION 0x40A8
+#define EXYNOS5420_DISP1_CONFIGURATION 0x40C0
+#define EXYNOS5420_DISP1_STATUS 0x40C4
+#define EXYNOS5420_DISP1_OPTION 0x40C8
+#define EXYNOS5420_MAU_CONFIGURATION 0x40E0
+#define EXYNOS5420_MAU_STATUS 0x40E4
+#define EXYNOS5420_MAU_OPTION 0x40E8
+#define EXYNOS5420_FSYS2_OPTION 0x4168
+#define EXYNOS5420_PSGEN_OPTION 0x4188
+
+/* For EXYNOS_CENTRAL_SEQ_OPTION */
+#define EXYNOS5_USE_STANDBYWFI_ARM_CORE0 BIT(16)
+#define EXYNOS5_USE_STANDBYWFI_ARM_CORE1 BUT(17)
+#define EXYNOS5_USE_STANDBYWFE_ARM_CORE0 BIT(24)
+#define EXYNOS5_USE_STANDBYWFE_ARM_CORE1 BIT(25)
+
+#define EXYNOS5420_ARM_USE_STANDBY_WFI0 BIT(4)
+#define EXYNOS5420_ARM_USE_STANDBY_WFI1 BIT(5)
+#define EXYNOS5420_ARM_USE_STANDBY_WFI2 BIT(6)
+#define EXYNOS5420_ARM_USE_STANDBY_WFI3 BIT(7)
+#define EXYNOS5420_KFC_USE_STANDBY_WFI0 BIT(8)
+#define EXYNOS5420_KFC_USE_STANDBY_WFI1 BIT(9)
+#define EXYNOS5420_KFC_USE_STANDBY_WFI2 BIT(10)
+#define EXYNOS5420_KFC_USE_STANDBY_WFI3 BIT(11)
+#define EXYNOS5420_ARM_USE_STANDBY_WFE0 BIT(16)
+#define EXYNOS5420_ARM_USE_STANDBY_WFE1 BIT(17)
+#define EXYNOS5420_ARM_USE_STANDBY_WFE2 BIT(18)
+#define EXYNOS5420_ARM_USE_STANDBY_WFE3 BIT(19)
+#define EXYNOS5420_KFC_USE_STANDBY_WFE0 BIT(20)
+#define EXYNOS5420_KFC_USE_STANDBY_WFE1 BIT(21)
+#define EXYNOS5420_KFC_USE_STANDBY_WFE2 BIT(22)
+#define EXYNOS5420_KFC_USE_STANDBY_WFE3 BIT(23)
+
+#define DUR_WAIT_RESET 0xF
+
+#define EXYNOS5420_USE_STANDBY_WFI_ALL (EXYNOS5420_ARM_USE_STANDBY_WFI0 \
+ | EXYNOS5420_ARM_USE_STANDBY_WFI1 \
+ | EXYNOS5420_ARM_USE_STANDBY_WFI2 \
+ | EXYNOS5420_ARM_USE_STANDBY_WFI3 \
+ | EXYNOS5420_KFC_USE_STANDBY_WFI0 \
+ | EXYNOS5420_KFC_USE_STANDBY_WFI1 \
+ | EXYNOS5420_KFC_USE_STANDBY_WFI2 \
+ | EXYNOS5420_KFC_USE_STANDBY_WFI3)
+
#endif /* __ASM_ARCH_REGS_PMU_H */
*/
#include <linux/linkage.h>
+#include "smc.h"
#define CPU_MASK 0xff0ffff0
#define CPU_CORTEX_A9 0x410fc090
#endif
b cpu_resume
ENDPROC(exynos_cpu_resume)
+
+ .align
+
+ENTRY(exynos_cpu_resume_ns)
+ mrc p15, 0, r0, c0, c0, 0
+ ldr r1, =CPU_MASK
+ and r0, r0, r1
+ ldr r1, =CPU_CORTEX_A9
+ cmp r0, r1
+ bne skip_cp15
+
+ adr r0, cp15_save_power
+ ldr r1, [r0]
+ adr r0, cp15_save_diag
+ ldr r2, [r0]
+ mov r0, #SMC_CMD_C15RESUME
+ dsb
+ smc #0
+skip_cp15:
+ b cpu_resume
+ENDPROC(exynos_cpu_resume_ns)
+ .globl cp15_save_diag
+cp15_save_diag:
+ .long 0 @ cp15 diagnostic
+ .globl cp15_save_power
+cp15_save_power:
+ .long 0 @ cp15 power control
#define SMC_CMD_L2X0INVALL (-24)
#define SMC_CMD_L2X0DEBUG (-25)
+#ifndef __ASSEMBLY__
+
extern void exynos_smc(u32 cmd, u32 arg1, u32 arg2, u32 arg3);
+#endif /* __ASSEMBLY__ */
+
#endif
--- /dev/null
+/*
+ * Copyright (c) 2011-2014 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS - Suspend support
+ *
+ * Based on arch/arm/mach-s3c2410/pm.c
+ * Copyright (c) 2006 Simtec Electronics
+ * Ben Dooks <ben@simtec.co.uk>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/suspend.h>
+#include <linux/syscore_ops.h>
+#include <linux/cpu_pm.h>
+#include <linux/io.h>
+#include <linux/irqchip/arm-gic.h>
+#include <linux/err.h>
+#include <linux/regulator/machine.h>
+
+#include <asm/cacheflush.h>
+#include <asm/hardware/cache-l2x0.h>
+#include <asm/firmware.h>
+#include <asm/mcpm.h>
+#include <asm/smp_scu.h>
+#include <asm/suspend.h>
+
+#include <plat/pm-common.h>
+#include <plat/regs-srom.h>
+
+#include "common.h"
+#include "regs-pmu.h"
+#include "regs-sys.h"
+#include "exynos-pmu.h"
+
+#define S5P_CHECK_SLEEP 0x00000BAD
+
+#define REG_TABLE_END (-1U)
+
+#define EXYNOS5420_CPU_STATE 0x28
+
+/**
+ * struct exynos_wkup_irq - Exynos GIC to PMU IRQ mapping
+ * @hwirq: Hardware IRQ signal of the GIC
+ * @mask: Mask in PMU wake-up mask register
+ */
+struct exynos_wkup_irq {
+ unsigned int hwirq;
+ u32 mask;
+};
+
+static struct sleep_save exynos5_sys_save[] = {
+ SAVE_ITEM(EXYNOS5_SYS_I2C_CFG),
+};
+
+static struct sleep_save exynos_core_save[] = {
+ /* SROM side */
+ SAVE_ITEM(S5P_SROM_BW),
+ SAVE_ITEM(S5P_SROM_BC0),
+ SAVE_ITEM(S5P_SROM_BC1),
+ SAVE_ITEM(S5P_SROM_BC2),
+ SAVE_ITEM(S5P_SROM_BC3),
+};
+
+struct exynos_pm_data {
+ const struct exynos_wkup_irq *wkup_irq;
+ struct sleep_save *extra_save;
+ int num_extra_save;
+ unsigned int wake_disable_mask;
+ unsigned int *release_ret_regs;
+
+ void (*pm_prepare)(void);
+ void (*pm_resume_prepare)(void);
+ void (*pm_resume)(void);
+ int (*pm_suspend)(void);
+ int (*cpu_suspend)(unsigned long);
+};
+
+struct exynos_pm_data *pm_data;
+
+static int exynos5420_cpu_state;
+static unsigned int exynos_pmu_spare3;
+
+/*
+ * GIC wake-up support
+ */
+
+static u32 exynos_irqwake_intmask = 0xffffffff;
+
+static const struct exynos_wkup_irq exynos4_wkup_irq[] = {
+ { 76, BIT(1) }, /* RTC alarm */
+ { 77, BIT(2) }, /* RTC tick */
+ { /* sentinel */ },
+};
+
+static const struct exynos_wkup_irq exynos5250_wkup_irq[] = {
+ { 75, BIT(1) }, /* RTC alarm */
+ { 76, BIT(2) }, /* RTC tick */
+ { /* sentinel */ },
+};
+
+unsigned int exynos_release_ret_regs[] = {
+ S5P_PAD_RET_MAUDIO_OPTION,
+ S5P_PAD_RET_GPIO_OPTION,
+ S5P_PAD_RET_UART_OPTION,
+ S5P_PAD_RET_MMCA_OPTION,
+ S5P_PAD_RET_MMCB_OPTION,
+ S5P_PAD_RET_EBIA_OPTION,
+ S5P_PAD_RET_EBIB_OPTION,
+ REG_TABLE_END,
+};
+
+unsigned int exynos5420_release_ret_regs[] = {
+ EXYNOS_PAD_RET_DRAM_OPTION,
+ EXYNOS_PAD_RET_MAUDIO_OPTION,
+ EXYNOS_PAD_RET_JTAG_OPTION,
+ EXYNOS5420_PAD_RET_GPIO_OPTION,
+ EXYNOS5420_PAD_RET_UART_OPTION,
+ EXYNOS5420_PAD_RET_MMCA_OPTION,
+ EXYNOS5420_PAD_RET_MMCB_OPTION,
+ EXYNOS5420_PAD_RET_MMCC_OPTION,
+ EXYNOS5420_PAD_RET_HSI_OPTION,
+ EXYNOS_PAD_RET_EBIA_OPTION,
+ EXYNOS_PAD_RET_EBIB_OPTION,
+ EXYNOS5420_PAD_RET_SPI_OPTION,
+ EXYNOS5420_PAD_RET_DRAM_COREBLK_OPTION,
+ REG_TABLE_END,
+};
+
+static int exynos_irq_set_wake(struct irq_data *data, unsigned int state)
+{
+ const struct exynos_wkup_irq *wkup_irq;
+
+ if (!pm_data->wkup_irq)
+ return -ENOENT;
+ wkup_irq = pm_data->wkup_irq;
+
+ while (wkup_irq->mask) {
+ if (wkup_irq->hwirq == data->hwirq) {
+ if (!state)
+ exynos_irqwake_intmask |= wkup_irq->mask;
+ else
+ exynos_irqwake_intmask &= ~wkup_irq->mask;
+ return 0;
+ }
+ ++wkup_irq;
+ }
+
+ return -ENOENT;
+}
+
+static int exynos_cpu_do_idle(void)
+{
+ /* issue the standby signal into the pm unit. */
+ cpu_do_idle();
+
+ pr_info("Failed to suspend the system\n");
+ return 1; /* Aborting suspend */
+}
+static void exynos_flush_cache_all(void)
+{
+ flush_cache_all();
+ outer_flush_all();
+}
+
+static int exynos_cpu_suspend(unsigned long arg)
+{
+ exynos_flush_cache_all();
+ return exynos_cpu_do_idle();
+}
+
+static int exynos5420_cpu_suspend(unsigned long arg)
+{
+ /* MCPM works with HW CPU identifiers */
+ unsigned int mpidr = read_cpuid_mpidr();
+ unsigned int cluster = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+ unsigned int cpu = MPIDR_AFFINITY_LEVEL(mpidr, 0);
+
+ __raw_writel(0x0, sysram_base_addr + EXYNOS5420_CPU_STATE);
+
+ if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM)) {
+ mcpm_set_entry_vector(cpu, cluster, exynos_cpu_resume);
+
+ /*
+ * Residency value passed to mcpm_cpu_suspend back-end
+ * has to be given clear semantics. Set to 0 as a
+ * temporary value.
+ */
+ mcpm_cpu_suspend(0);
+ }
+
+ pr_info("Failed to suspend the system\n");
+
+ /* return value != 0 means failure */
+ return 1;
+}
+
+static void exynos_pm_set_wakeup_mask(void)
+{
+ /* Set wake-up mask registers */
+ pmu_raw_writel(exynos_get_eint_wake_mask(), S5P_EINT_WAKEUP_MASK);
+ pmu_raw_writel(exynos_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK);
+}
+
+static void exynos_pm_enter_sleep_mode(void)
+{
+ /* Set value of power down register for sleep mode */
+ exynos_sys_powerdown_conf(SYS_SLEEP);
+ pmu_raw_writel(S5P_CHECK_SLEEP, S5P_INFORM1);
+}
+
+static void exynos_pm_prepare(void)
+{
+ /* Set wake-up mask registers */
+ exynos_pm_set_wakeup_mask();
+
+ s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
+
+ if (pm_data->extra_save)
+ s3c_pm_do_save(pm_data->extra_save,
+ pm_data->num_extra_save);
+
+ exynos_pm_enter_sleep_mode();
+
+ /* ensure at least INFORM0 has the resume address */
+ pmu_raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0);
+}
+
+static void exynos5420_pm_prepare(void)
+{
+ unsigned int tmp;
+
+ /* Set wake-up mask registers */
+ exynos_pm_set_wakeup_mask();
+
+ s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
+
+ exynos_pmu_spare3 = pmu_raw_readl(S5P_PMU_SPARE3);
+ /*
+ * The cpu state needs to be saved and restored so that the
+ * secondary CPUs will enter low power start. Though the U-Boot
+ * is setting the cpu state with low power flag, the kernel
+ * needs to restore it back in case, the primary cpu fails to
+ * suspend for any reason.
+ */
+ exynos5420_cpu_state = __raw_readl(sysram_base_addr +
+ EXYNOS5420_CPU_STATE);
+
+ exynos_pm_enter_sleep_mode();
+
+ /* ensure at least INFORM0 has the resume address */
+ if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM))
+ pmu_raw_writel(virt_to_phys(mcpm_entry_point), S5P_INFORM0);
+
+ tmp = pmu_raw_readl(EXYNOS5_ARM_L2_OPTION);
+ tmp &= ~EXYNOS5_USE_RETENTION;
+ pmu_raw_writel(tmp, EXYNOS5_ARM_L2_OPTION);
+
+ tmp = pmu_raw_readl(EXYNOS5420_SFR_AXI_CGDIS1);
+ tmp |= EXYNOS5420_UFS;
+ pmu_raw_writel(tmp, EXYNOS5420_SFR_AXI_CGDIS1);
+
+ tmp = pmu_raw_readl(EXYNOS5420_ARM_COMMON_OPTION);
+ tmp &= ~EXYNOS5420_L2RSTDISABLE_VALUE;
+ pmu_raw_writel(tmp, EXYNOS5420_ARM_COMMON_OPTION);
+
+ tmp = pmu_raw_readl(EXYNOS5420_FSYS2_OPTION);
+ tmp |= EXYNOS5420_EMULATION;
+ pmu_raw_writel(tmp, EXYNOS5420_FSYS2_OPTION);
+
+ tmp = pmu_raw_readl(EXYNOS5420_PSGEN_OPTION);
+ tmp |= EXYNOS5420_EMULATION;
+ pmu_raw_writel(tmp, EXYNOS5420_PSGEN_OPTION);
+}
+
+
+static int exynos_pm_suspend(void)
+{
+ exynos_pm_central_suspend();
+
+ if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9)
+ exynos_cpu_save_register();
+
+ return 0;
+}
+
+static int exynos5420_pm_suspend(void)
+{
+ u32 this_cluster;
+
+ exynos_pm_central_suspend();
+
+ /* Setting SEQ_OPTION register */
+
+ this_cluster = MPIDR_AFFINITY_LEVEL(read_cpuid_mpidr(), 1);
+ if (!this_cluster)
+ pmu_raw_writel(EXYNOS5420_ARM_USE_STANDBY_WFI0,
+ S5P_CENTRAL_SEQ_OPTION);
+ else
+ pmu_raw_writel(EXYNOS5420_KFC_USE_STANDBY_WFI0,
+ S5P_CENTRAL_SEQ_OPTION);
+ return 0;
+}
+
+static void exynos_pm_release_retention(void)
+{
+ unsigned int i;
+
+ for (i = 0; (pm_data->release_ret_regs[i] != REG_TABLE_END); i++)
+ pmu_raw_writel(EXYNOS_WAKEUP_FROM_LOWPWR,
+ pm_data->release_ret_regs[i]);
+}
+
+static void exynos_pm_resume(void)
+{
+ u32 cpuid = read_cpuid_part();
+
+ if (exynos_pm_central_resume())
+ goto early_wakeup;
+
+ /* For release retention */
+ exynos_pm_release_retention();
+
+ if (pm_data->extra_save)
+ s3c_pm_do_restore_core(pm_data->extra_save,
+ pm_data->num_extra_save);
+
+ s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save));
+
+ if (cpuid == ARM_CPU_PART_CORTEX_A9)
+ scu_enable(S5P_VA_SCU);
+
+ if (call_firmware_op(resume) == -ENOSYS
+ && cpuid == ARM_CPU_PART_CORTEX_A9)
+ exynos_cpu_restore_register();
+
+early_wakeup:
+
+ /* Clear SLEEP mode set in INFORM1 */
+ pmu_raw_writel(0x0, S5P_INFORM1);
+}
+
+static void exynos5420_prepare_pm_resume(void)
+{
+ if (IS_ENABLED(CONFIG_EXYNOS5420_MCPM))
+ WARN_ON(mcpm_cpu_powered_up());
+}
+
+static void exynos5420_pm_resume(void)
+{
+ unsigned long tmp;
+
+ /* Restore the CPU0 low power state register */
+ tmp = pmu_raw_readl(EXYNOS5_ARM_CORE0_SYS_PWR_REG);
+ pmu_raw_writel(tmp | S5P_CORE_LOCAL_PWR_EN,
+ EXYNOS5_ARM_CORE0_SYS_PWR_REG);
+
+ /* Restore the sysram cpu state register */
+ __raw_writel(exynos5420_cpu_state,
+ sysram_base_addr + EXYNOS5420_CPU_STATE);
+
+ pmu_raw_writel(EXYNOS5420_USE_STANDBY_WFI_ALL,
+ S5P_CENTRAL_SEQ_OPTION);
+
+ if (exynos_pm_central_resume())
+ goto early_wakeup;
+
+ /* For release retention */
+ exynos_pm_release_retention();
+
+ pmu_raw_writel(exynos_pmu_spare3, S5P_PMU_SPARE3);
+
+ s3c_pm_do_restore_core(exynos_core_save, ARRAY_SIZE(exynos_core_save));
+
+early_wakeup:
+
+ tmp = pmu_raw_readl(EXYNOS5420_SFR_AXI_CGDIS1);
+ tmp &= ~EXYNOS5420_UFS;
+ pmu_raw_writel(tmp, EXYNOS5420_SFR_AXI_CGDIS1);
+
+ tmp = pmu_raw_readl(EXYNOS5420_FSYS2_OPTION);
+ tmp &= ~EXYNOS5420_EMULATION;
+ pmu_raw_writel(tmp, EXYNOS5420_FSYS2_OPTION);
+
+ tmp = pmu_raw_readl(EXYNOS5420_PSGEN_OPTION);
+ tmp &= ~EXYNOS5420_EMULATION;
+ pmu_raw_writel(tmp, EXYNOS5420_PSGEN_OPTION);
+
+ /* Clear SLEEP mode set in INFORM1 */
+ pmu_raw_writel(0x0, S5P_INFORM1);
+}
+
+/*
+ * Suspend Ops
+ */
+
+static int exynos_suspend_enter(suspend_state_t state)
+{
+ int ret;
+
+ s3c_pm_debug_init();
+
+ S3C_PMDBG("%s: suspending the system...\n", __func__);
+
+ S3C_PMDBG("%s: wakeup masks: %08x,%08x\n", __func__,
+ exynos_irqwake_intmask, exynos_get_eint_wake_mask());
+
+ if (exynos_irqwake_intmask == -1U
+ && exynos_get_eint_wake_mask() == -1U) {
+ pr_err("%s: No wake-up sources!\n", __func__);
+ pr_err("%s: Aborting sleep\n", __func__);
+ return -EINVAL;
+ }
+
+ s3c_pm_save_uarts();
+ if (pm_data->pm_prepare)
+ pm_data->pm_prepare();
+ flush_cache_all();
+ s3c_pm_check_store();
+
+ ret = call_firmware_op(suspend);
+ if (ret == -ENOSYS)
+ ret = cpu_suspend(0, pm_data->cpu_suspend);
+ if (ret)
+ return ret;
+
+ if (pm_data->pm_resume_prepare)
+ pm_data->pm_resume_prepare();
+ s3c_pm_restore_uarts();
+
+ S3C_PMDBG("%s: wakeup stat: %08x\n", __func__,
+ pmu_raw_readl(S5P_WAKEUP_STAT));
+
+ s3c_pm_check_restore();
+
+ S3C_PMDBG("%s: resuming the system...\n", __func__);
+
+ return 0;
+}
+
+static int exynos_suspend_prepare(void)
+{
+ int ret;
+
+ /*
+ * REVISIT: It would be better if struct platform_suspend_ops
+ * .prepare handler get the suspend_state_t as a parameter to
+ * avoid hard-coding the suspend to mem state. It's safe to do
+ * it now only because the suspend_valid_only_mem function is
+ * used as the .valid callback used to check if a given state
+ * is supported by the platform anyways.
+ */
+ ret = regulator_suspend_prepare(PM_SUSPEND_MEM);
+ if (ret) {
+ pr_err("Failed to prepare regulators for suspend (%d)\n", ret);
+ return ret;
+ }
+
+ s3c_pm_check_prepare();
+
+ return 0;
+}
+
+static void exynos_suspend_finish(void)
+{
+ int ret;
+
+ s3c_pm_check_cleanup();
+
+ ret = regulator_suspend_finish();
+ if (ret)
+ pr_warn("Failed to resume regulators from suspend (%d)\n", ret);
+}
+
+static const struct platform_suspend_ops exynos_suspend_ops = {
+ .enter = exynos_suspend_enter,
+ .prepare = exynos_suspend_prepare,
+ .finish = exynos_suspend_finish,
+ .valid = suspend_valid_only_mem,
+};
+
+static const struct exynos_pm_data exynos4_pm_data = {
+ .wkup_irq = exynos4_wkup_irq,
+ .wake_disable_mask = ((0xFF << 8) | (0x1F << 1)),
+ .release_ret_regs = exynos_release_ret_regs,
+ .pm_suspend = exynos_pm_suspend,
+ .pm_resume = exynos_pm_resume,
+ .pm_prepare = exynos_pm_prepare,
+ .cpu_suspend = exynos_cpu_suspend,
+};
+
+static const struct exynos_pm_data exynos5250_pm_data = {
+ .wkup_irq = exynos5250_wkup_irq,
+ .wake_disable_mask = ((0xFF << 8) | (0x1F << 1)),
+ .release_ret_regs = exynos_release_ret_regs,
+ .extra_save = exynos5_sys_save,
+ .num_extra_save = ARRAY_SIZE(exynos5_sys_save),
+ .pm_suspend = exynos_pm_suspend,
+ .pm_resume = exynos_pm_resume,
+ .pm_prepare = exynos_pm_prepare,
+ .cpu_suspend = exynos_cpu_suspend,
+};
+
+static struct exynos_pm_data exynos5420_pm_data = {
+ .wkup_irq = exynos5250_wkup_irq,
+ .wake_disable_mask = (0x7F << 7) | (0x1F << 1),
+ .release_ret_regs = exynos5420_release_ret_regs,
+ .pm_resume_prepare = exynos5420_prepare_pm_resume,
+ .pm_resume = exynos5420_pm_resume,
+ .pm_suspend = exynos5420_pm_suspend,
+ .pm_prepare = exynos5420_pm_prepare,
+ .cpu_suspend = exynos5420_cpu_suspend,
+};
+
+static struct of_device_id exynos_pmu_of_device_ids[] = {
+ {
+ .compatible = "samsung,exynos4210-pmu",
+ .data = &exynos4_pm_data,
+ }, {
+ .compatible = "samsung,exynos4212-pmu",
+ .data = &exynos4_pm_data,
+ }, {
+ .compatible = "samsung,exynos4412-pmu",
+ .data = &exynos4_pm_data,
+ }, {
+ .compatible = "samsung,exynos5250-pmu",
+ .data = &exynos5250_pm_data,
+ }, {
+ .compatible = "samsung,exynos5420-pmu",
+ .data = &exynos5420_pm_data,
+ },
+ { /*sentinel*/ },
+};
+
+static struct syscore_ops exynos_pm_syscore_ops;
+
+void __init exynos_pm_init(void)
+{
+ const struct of_device_id *match;
+ u32 tmp;
+
+ of_find_matching_node_and_match(NULL, exynos_pmu_of_device_ids, &match);
+ if (!match) {
+ pr_err("Failed to find PMU node\n");
+ return;
+ }
+ pm_data = (struct exynos_pm_data *) match->data;
+
+ /* Platform-specific GIC callback */
+ gic_arch_extn.irq_set_wake = exynos_irq_set_wake;
+
+ /* All wakeup disable */
+ tmp = pmu_raw_readl(S5P_WAKEUP_MASK);
+ tmp |= pm_data->wake_disable_mask;
+ pmu_raw_writel(tmp, S5P_WAKEUP_MASK);
+
+ exynos_pm_syscore_ops.suspend = pm_data->pm_suspend;
+ exynos_pm_syscore_ops.resume = pm_data->pm_resume;
+
+ register_syscore_ops(&exynos_pm_syscore_ops);
+ suspend_set_ops(&exynos_suspend_ops);
+}
#include <linux/input.h>
#include <linux/io.h>
#include <linux/irqchip.h>
-#include <linux/mailbox.h>
+#include <linux/pl320-ipc.h>
#include <linux/of.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
bool "Vybrid Family VF610 support"
select ARM_GIC
select PINCTRL_VF610
- select VF_PIT_TIMER
select PL310_ERRATA_769419 if CACHE_L2X0
help
This enable support for Freescale Vybrid VF610 processor.
+choice
+ prompt "Clocksource for scheduler clock"
+ depends on SOC_VF610
+ default VF_USE_ARM_GLOBAL_TIMER
+
+ config VF_USE_ARM_GLOBAL_TIMER
+ bool "Use ARM Global Timer"
+ select ARM_GLOBAL_TIMER
+ select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
+ help
+ Use the ARM Global Timer as clocksource
+
+ config VF_USE_PIT_TIMER
+ bool "Use PIT timer"
+ select VF_PIT_TIMER
+ help
+ Use SoC Periodic Interrupt Timer (PIT) as clocksource
+
+endchoice
+
+config SOC_LS1021A
+ bool "Freescale LS1021A support"
+ select ARM_GIC
+ select HAVE_ARM_ARCH_TIMER
+ select PCI_DOMAINS if PCI
+ select ZONE_DMA if ARM_LPAE
+
+ help
+ This enable support for Freescale LS1021A processor.
+
endif
source "arch/arm/mach-imx/devices/Kconfig"
obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o
imx5-pm-$(CONFIG_PM) += pm-imx5.o
-obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o clk-imx51-imx53.o $(imx5-pm-y)
+obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o clk-imx51-imx53.o clk-cpu.o $(imx5-pm-y)
obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \
clk-pfd.o clk-busy.o clk.o \
obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o
obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o
obj-$(CONFIG_HAVE_IMX_SRC) += src.o
-ifdef CONFIG_SOC_IMX6
+ifneq ($(CONFIG_SOC_IMX6)$(CONFIG_SOC_LS1021A),)
AFLAGS_headsmp.o :=-Wa,-march=armv7-a
obj-$(CONFIG_SMP) += headsmp.o platsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
obj-$(CONFIG_SOC_VF610) += clk-vf610.o mach-vf610.o
+obj-$(CONFIG_SOC_LS1021A) += mach-ls1021a.o
+
obj-y += devices/
#define ANADIG_DIGPROG_IMX6SL 0x280
#define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG 0x40000
+#define BM_ANADIG_REG_2P5_ENABLE_PULLDOWN 0x8
#define BM_ANADIG_REG_CORE_FET_ODRIVE 0x20000000
#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG 0x1000
+/* Below MISC0_DISCON_HIGH_SNVS is only for i.MX6SL */
+#define BM_ANADIG_ANA_MISC0_DISCON_HIGH_SNVS 0x2000
#define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x80000
#define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x100000
BM_ANADIG_REG_CORE_FET_ODRIVE);
}
+static inline void imx_anatop_enable_2p5_pulldown(bool enable)
+{
+ regmap_write(anatop, ANADIG_REG_2P5 + (enable ? REG_SET : REG_CLR),
+ BM_ANADIG_REG_2P5_ENABLE_PULLDOWN);
+}
+
+static inline void imx_anatop_disconnect_high_snvs(bool enable)
+{
+ regmap_write(anatop, ANADIG_ANA_MISC0 + (enable ? REG_SET : REG_CLR),
+ BM_ANADIG_ANA_MISC0_DISCON_HIGH_SNVS);
+}
+
void imx_anatop_pre_suspend(void)
{
- imx_anatop_enable_weak2p5(true);
+ if (imx_mmdc_get_ddr_type() == IMX_DDR_TYPE_LPDDR2)
+ imx_anatop_enable_2p5_pulldown(true);
+ else
+ imx_anatop_enable_weak2p5(true);
+
imx_anatop_enable_fet_odrive(true);
+
+ if (cpu_is_imx6sl())
+ imx_anatop_disconnect_high_snvs(true);
}
void imx_anatop_post_resume(void)
{
+ if (imx_mmdc_get_ddr_type() == IMX_DDR_TYPE_LPDDR2)
+ imx_anatop_enable_2p5_pulldown(false);
+ else
+ imx_anatop_enable_weak2p5(false);
+
imx_anatop_enable_fet_odrive(false);
- imx_anatop_enable_weak2p5(false);
+
+ if (cpu_is_imx6sl())
+ imx_anatop_disconnect_high_snvs(false);
+
}
static void imx_anatop_usb_chrg_detect_disable(void)
--- /dev/null
+/*
+ * Copyright (c) 2014 Lucas Stach <l.stach@pengutronix.de>, Pengutronix
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <linux/slab.h>
+
+struct clk_cpu {
+ struct clk_hw hw;
+ struct clk *div;
+ struct clk *mux;
+ struct clk *pll;
+ struct clk *step;
+};
+
+static inline struct clk_cpu *to_clk_cpu(struct clk_hw *hw)
+{
+ return container_of(hw, struct clk_cpu, hw);
+}
+
+static unsigned long clk_cpu_recalc_rate(struct clk_hw *hw,
+ unsigned long parent_rate)
+{
+ struct clk_cpu *cpu = to_clk_cpu(hw);
+
+ return clk_get_rate(cpu->div);
+}
+
+static long clk_cpu_round_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *prate)
+{
+ struct clk_cpu *cpu = to_clk_cpu(hw);
+
+ return clk_round_rate(cpu->pll, rate);
+}
+
+static int clk_cpu_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_cpu *cpu = to_clk_cpu(hw);
+ int ret;
+
+ /* switch to PLL bypass clock */
+ ret = clk_set_parent(cpu->mux, cpu->step);
+ if (ret)
+ return ret;
+
+ /* reprogram PLL */
+ ret = clk_set_rate(cpu->pll, rate);
+ if (ret) {
+ clk_set_parent(cpu->mux, cpu->pll);
+ return ret;
+ }
+ /* switch back to PLL clock */
+ clk_set_parent(cpu->mux, cpu->pll);
+
+ /* Ensure the divider is what we expect */
+ clk_set_rate(cpu->div, rate);
+
+ return 0;
+}
+
+static const struct clk_ops clk_cpu_ops = {
+ .recalc_rate = clk_cpu_recalc_rate,
+ .round_rate = clk_cpu_round_rate,
+ .set_rate = clk_cpu_set_rate,
+};
+
+struct clk *imx_clk_cpu(const char *name, const char *parent_name,
+ struct clk *div, struct clk *mux, struct clk *pll,
+ struct clk *step)
+{
+ struct clk_cpu *cpu;
+ struct clk *clk;
+ struct clk_init_data init;
+
+ cpu = kzalloc(sizeof(*cpu), GFP_KERNEL);
+ if (!cpu)
+ return ERR_PTR(-ENOMEM);
+
+ cpu->div = div;
+ cpu->mux = mux;
+ cpu->pll = pll;
+ cpu->step = step;
+
+ init.name = name;
+ init.ops = &clk_cpu_ops;
+ init.flags = 0;
+ init.parent_names = &parent_name;
+ init.num_parents = 1;
+
+ cpu->hw.init = &init;
+
+ clk = clk_register(NULL, &cpu->hw);
+ if (IS_ERR(clk))
+ kfree(cpu);
+
+ return clk;
+}
static const char *spdif_sel[] = { "pll1_sw", "pll2_sw", "pll3_sw", "spdif_xtal_sel", };
static const char *spdif0_com_sel[] = { "spdif0_podf", "ssi1_root_gate", };
static const char *mx51_spdif1_com_sel[] = { "spdif1_podf", "ssi2_root_gate", };
+static const char *step_sels[] = { "lp_apm", };
+static const char *cpu_podf_sels[] = { "pll1_sw", "step_sel" };
static struct clk *clk[IMX5_CLK_END];
static struct clk_onecell_data clk_data;
clk[IMX5_CLK_USB_PHY_PODF] = imx_clk_divider("usb_phy_podf", "usb_phy_pred", MXC_CCM_CDCDR, 0, 3);
clk[IMX5_CLK_USB_PHY_SEL] = imx_clk_mux("usb_phy_sel", MXC_CCM_CSCMR1, 26, 1,
usb_phy_sel_str, ARRAY_SIZE(usb_phy_sel_str));
- clk[IMX5_CLK_CPU_PODF] = imx_clk_divider("cpu_podf", "pll1_sw", MXC_CCM_CACRR, 0, 3);
+ clk[IMX5_CLK_STEP_SEL] = imx_clk_mux("step_sel", MXC_CCM_CCSR, 7, 2, step_sels, ARRAY_SIZE(step_sels));
+ clk[IMX5_CLK_CPU_PODF_SEL] = imx_clk_mux("cpu_podf_sel", MXC_CCM_CCSR, 2, 1, cpu_podf_sels, ARRAY_SIZE(cpu_podf_sels));
+ clk[IMX5_CLK_CPU_PODF] = imx_clk_divider("cpu_podf", "cpu_podf_sel", MXC_CCM_CACRR, 0, 3);
clk[IMX5_CLK_DI_PRED] = imx_clk_divider("di_pred", "pll3_sw", MXC_CCM_CDCDR, 6, 3);
clk[IMX5_CLK_IIM_GATE] = imx_clk_gate2("iim_gate", "ipg", MXC_CCM_CCGR0, 30);
clk[IMX5_CLK_UART1_IPG_GATE] = imx_clk_gate2("uart1_ipg_gate", "ipg", MXC_CCM_CCGR1, 6);
clk[IMX5_CLK_CKO2] = imx_clk_gate2("cko2", "cko2_podf", MXC_CCM_CCOSR, 24);
clk[IMX5_CLK_SPDIF_XTAL_SEL] = imx_clk_mux("spdif_xtal_sel", MXC_CCM_CSCMR1, 2, 2,
mx53_spdif_xtal_sel, ARRAY_SIZE(mx53_spdif_xtal_sel));
+ clk[IMX5_CLK_ARM] = imx_clk_cpu("arm", "cpu_podf",
+ clk[IMX5_CLK_CPU_PODF],
+ clk[IMX5_CLK_CPU_PODF_SEL],
+ clk[IMX5_CLK_PLL1_SW],
+ clk[IMX5_CLK_STEP_SEL]);
imx_check_clocks(clk, ARRAY_SIZE(clk));
/* move can bus clk to 24MHz */
clk_set_parent(clk[IMX5_CLK_CAN_SEL], clk[IMX5_CLK_LP_APM]);
+ /* make sure step clock is running from 24MHz */
+ clk_set_parent(clk[IMX5_CLK_STEP_SEL], clk[IMX5_CLK_LP_APM]);
+
clk_prepare_enable(clk[IMX5_CLK_IIM_GATE]);
imx_print_silicon_rev("i.MX53", mx53_revision());
clk_disable_unprepare(clk[IMX5_CLK_IIM_GATE]);
static const char *ssi_sels[] = { "pll3_pfd2_508m", "pll3_pfd3_454m", "pll4_audio_div", };
static const char *usdhc_sels[] = { "pll2_pfd2_396m", "pll2_pfd0_352m", };
static const char *enfc_sels[] = { "pll2_pfd0_352m", "pll2_bus", "pll3_usb_otg", "pll2_pfd2_396m", };
-static const char *emi_sels[] = { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", };
-static const char *emi_slow_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
+static const char *eim_sels[] = { "pll2_pfd2_396m", "pll3_usb_otg", "axi", "pll2_pfd0_352m", };
+static const char *eim_slow_sels[] = { "axi", "pll3_usb_otg", "pll2_pfd2_396m", "pll2_pfd0_352m", };
static const char *vdo_axi_sels[] = { "axi", "ahb", };
static const char *vpu_axi_sels[] = { "axi", "pll2_pfd2_396m", "pll2_pfd0_352m", };
static const char *cko1_sels[] = { "pll3_usb_otg", "pll2_bus", "pll1_sys", "pll5_video_div",
post_div_table[2].div = 1;
video_div_table[1].div = 1;
video_div_table[2].div = 1;
- };
+ }
clk[IMX6QDL_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", base + 0x00, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
clk[IMX6QDL_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", base + 0x30, 14, 2, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
clk[IMX6QDL_CLK_USDHC3_SEL] = imx_clk_fixup_mux("usdhc3_sel", base + 0x1c, 18, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
clk[IMX6QDL_CLK_USDHC4_SEL] = imx_clk_fixup_mux("usdhc4_sel", base + 0x1c, 19, 1, usdhc_sels, ARRAY_SIZE(usdhc_sels), imx_cscmr1_fixup);
clk[IMX6QDL_CLK_ENFC_SEL] = imx_clk_mux("enfc_sel", base + 0x2c, 16, 2, enfc_sels, ARRAY_SIZE(enfc_sels));
- clk[IMX6QDL_CLK_EMI_SEL] = imx_clk_fixup_mux("emi_sel", base + 0x1c, 27, 2, emi_sels, ARRAY_SIZE(emi_sels), imx_cscmr1_fixup);
- clk[IMX6QDL_CLK_EMI_SLOW_SEL] = imx_clk_fixup_mux("emi_slow_sel", base + 0x1c, 29, 2, emi_slow_sels, ARRAY_SIZE(emi_slow_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_EIM_SEL] = imx_clk_fixup_mux("eim_sel", base + 0x1c, 27, 2, eim_sels, ARRAY_SIZE(eim_sels), imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_EIM_SLOW_SEL] = imx_clk_fixup_mux("eim_slow_sel", base + 0x1c, 29, 2, eim_slow_sels, ARRAY_SIZE(eim_slow_sels), imx_cscmr1_fixup);
clk[IMX6QDL_CLK_VDO_AXI_SEL] = imx_clk_mux("vdo_axi_sel", base + 0x18, 11, 1, vdo_axi_sels, ARRAY_SIZE(vdo_axi_sels));
clk[IMX6QDL_CLK_VPU_AXI_SEL] = imx_clk_mux("vpu_axi_sel", base + 0x18, 14, 2, vpu_axi_sels, ARRAY_SIZE(vpu_axi_sels));
clk[IMX6QDL_CLK_CKO1_SEL] = imx_clk_mux("cko1_sel", base + 0x60, 0, 4, cko1_sels, ARRAY_SIZE(cko1_sels));
clk[IMX6QDL_CLK_USDHC4_PODF] = imx_clk_divider("usdhc4_podf", "usdhc4_sel", base + 0x24, 22, 3);
clk[IMX6QDL_CLK_ENFC_PRED] = imx_clk_divider("enfc_pred", "enfc_sel", base + 0x2c, 18, 3);
clk[IMX6QDL_CLK_ENFC_PODF] = imx_clk_divider("enfc_podf", "enfc_pred", base + 0x2c, 21, 6);
- clk[IMX6QDL_CLK_EMI_PODF] = imx_clk_fixup_divider("emi_podf", "emi_sel", base + 0x1c, 20, 3, imx_cscmr1_fixup);
- clk[IMX6QDL_CLK_EMI_SLOW_PODF] = imx_clk_fixup_divider("emi_slow_podf", "emi_slow_sel", base + 0x1c, 23, 3, imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_EIM_PODF] = imx_clk_fixup_divider("eim_podf", "eim_sel", base + 0x1c, 20, 3, imx_cscmr1_fixup);
+ clk[IMX6QDL_CLK_EIM_SLOW_PODF] = imx_clk_fixup_divider("eim_slow_podf", "eim_slow_sel", base + 0x1c, 23, 3, imx_cscmr1_fixup);
clk[IMX6QDL_CLK_VPU_AXI_PODF] = imx_clk_divider("vpu_axi_podf", "vpu_axi_sel", base + 0x24, 25, 3);
clk[IMX6QDL_CLK_CKO1_PODF] = imx_clk_divider("cko1_podf", "cko1_sel", base + 0x60, 4, 3);
clk[IMX6QDL_CLK_CKO2_PODF] = imx_clk_divider("cko2_podf", "cko2_sel", base + 0x60, 21, 3);
clk[IMX6QDL_CLK_USDHC2] = imx_clk_gate2("usdhc2", "usdhc2_podf", base + 0x80, 4);
clk[IMX6QDL_CLK_USDHC3] = imx_clk_gate2("usdhc3", "usdhc3_podf", base + 0x80, 6);
clk[IMX6QDL_CLK_USDHC4] = imx_clk_gate2("usdhc4", "usdhc4_podf", base + 0x80, 8);
- clk[IMX6QDL_CLK_EIM_SLOW] = imx_clk_gate2("eim_slow", "emi_slow_podf", base + 0x80, 10);
+ clk[IMX6QDL_CLK_EIM_SLOW] = imx_clk_gate2("eim_slow", "eim_slow_podf", base + 0x80, 10);
clk[IMX6QDL_CLK_VDO_AXI] = imx_clk_gate2("vdo_axi", "vdo_axi_sel", base + 0x80, 12);
clk[IMX6QDL_CLK_VPU_AXI] = imx_clk_gate2("vpu_axi", "vpu_axi_podf", base + 0x80, 14);
clk[IMX6QDL_CLK_CKO1] = imx_clk_gate("cko1", "cko1_podf", base + 0x60, 7);
{
struct clk_pllv3 *pll = to_clk_pllv3(hw);
u32 val;
- int ret;
val = readl_relaxed(pll->base);
if (pll->powerup_set)
val &= ~BM_PLL_POWER;
writel_relaxed(val, pll->base);
- ret = clk_pllv3_wait_lock(pll);
- if (ret)
- return ret;
-
- return 0;
+ return clk_pllv3_wait_lock(pll);
}
static void clk_pllv3_unprepare(struct clk_hw *hw)
#define PFD_PLL1_BASE (anatop_base + 0x2b0)
#define PFD_PLL2_BASE (anatop_base + 0x100)
#define PFD_PLL3_BASE (anatop_base + 0xf0)
+#define PLL1_CTRL (anatop_base + 0x270)
+#define PLL2_CTRL (anatop_base + 0x30)
#define PLL3_CTRL (anatop_base + 0x10)
+#define PLL4_CTRL (anatop_base + 0x70)
+#define PLL5_CTRL (anatop_base + 0xe0)
+#define PLL6_CTRL (anatop_base + 0xa0)
#define PLL7_CTRL (anatop_base + 0x20)
+#define ANA_MISC1 (anatop_base + 0x160)
static void __iomem *anatop_base;
static void __iomem *ccm_base;
/* sources for multiplexer clocks, this is used multiple times */
static const char *fast_sels[] = { "firc", "fxosc", };
static const char *slow_sels[] = { "sirc_32k", "sxosc", };
-static const char *pll1_sels[] = { "pll1_main", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", };
-static const char *pll2_sels[] = { "pll2_main", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", };
-static const char *sys_sels[] = { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_main", "pll1_pfd_sel", "pll3_main", };
+static const char *pll1_sels[] = { "pll1_sys", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", };
+static const char *pll2_sels[] = { "pll2_bus", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", };
+static const char *pll_bypass_src_sels[] = { "fast_clk_sel", "lvds1_in", };
+static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", };
+static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", };
+static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", };
+static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", };
+static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", };
+static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", };
+static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", };
+static const char *sys_sels[] = { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_bus", "pll1_pfd_sel", "pll3_usb_otg", };
static const char *ddr_sels[] = { "pll2_pfd2", "sys_sel", };
static const char *rmii_sels[] = { "enet_ext", "audio_ext", "enet_50m", "enet_25m", };
static const char *enet_ts_sels[] = { "enet_ext", "fxosc", "audio_ext", "usb", "enet_ts", "enet_25m", "enet_50m", };
-static const char *esai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
-static const char *sai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", };
+static const char *esai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", };
+static const char *sai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", };
static const char *nfc_sels[] = { "platform_bus", "pll1_pfd1", "pll3_pfd1", "pll3_pfd3", };
-static const char *qspi_sels[] = { "pll3_main", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", };
-static const char *esdhc_sels[] = { "pll3_main", "pll3_pfd3", "pll1_pfd3", "platform_bus", };
-static const char *dcu_sels[] = { "pll1_pfd2", "pll3_main", };
+static const char *qspi_sels[] = { "pll3_usb_otg", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", };
+static const char *esdhc_sels[] = { "pll3_usb_otg", "pll3_pfd3", "pll1_pfd3", "platform_bus", };
+static const char *dcu_sels[] = { "pll1_pfd2", "pll3_usb_otg", };
static const char *gpu_sels[] = { "pll2_pfd2", "pll3_pfd2", };
-static const char *vadc_sels[] = { "pll6_main_div", "pll3_main_div", "pll3_main", };
+static const char *vadc_sels[] = { "pll6_video_div", "pll3_usb_otg_div", "pll3_usb_otg", };
/* FTM counter clock source, not module clock */
static const char *ftm_ext_sels[] = {"sirc_128k", "sxosc", "fxosc_half", "audio_ext", };
static const char *ftm_fix_sels[] = { "sxosc", "ipg_bus", };
-static struct clk_div_table pll4_main_div_table[] = {
+
+static struct clk_div_table pll4_audio_div_table[] = {
{ .val = 0, .div = 1 },
{ .val = 1, .div = 2 },
{ .val = 2, .div = 6 },
VF610_CLK_DDR_SEL,
};
+static struct clk * __init vf610_get_fixed_clock(
+ struct device_node *ccm_node, const char *name)
+{
+ struct clk *clk = of_clk_get_by_name(ccm_node, name);
+
+ /* Backward compatibility if device tree is missing clks assignments */
+ if (IS_ERR(clk))
+ clk = imx_obtain_fixed_clock(name, 0);
+ return clk;
+};
+
static void __init vf610_clocks_init(struct device_node *ccm_node)
{
struct device_node *np;
clk[VF610_CLK_SIRC_32K] = imx_clk_fixed("sirc_32k", 32000);
clk[VF610_CLK_FIRC] = imx_clk_fixed("firc", 24000000);
- clk[VF610_CLK_SXOSC] = imx_obtain_fixed_clock("sxosc", 0);
- clk[VF610_CLK_FXOSC] = imx_obtain_fixed_clock("fxosc", 0);
- clk[VF610_CLK_AUDIO_EXT] = imx_obtain_fixed_clock("audio_ext", 0);
- clk[VF610_CLK_ENET_EXT] = imx_obtain_fixed_clock("enet_ext", 0);
+ clk[VF610_CLK_SXOSC] = vf610_get_fixed_clock(ccm_node, "sxosc");
+ clk[VF610_CLK_FXOSC] = vf610_get_fixed_clock(ccm_node, "fxosc");
+ clk[VF610_CLK_AUDIO_EXT] = vf610_get_fixed_clock(ccm_node, "audio_ext");
+ clk[VF610_CLK_ENET_EXT] = vf610_get_fixed_clock(ccm_node, "enet_ext");
+
+ /* Clock source from external clock via LVDs PAD */
+ clk[VF610_CLK_ANACLK1] = vf610_get_fixed_clock(ccm_node, "anaclk1");
clk[VF610_CLK_FXOSC_HALF] = imx_clk_fixed_factor("fxosc_half", "fxosc", 1, 2);
clk[VF610_CLK_SLOW_CLK_SEL] = imx_clk_mux("slow_clk_sel", CCM_CCSR, 4, 1, slow_sels, ARRAY_SIZE(slow_sels));
clk[VF610_CLK_FASK_CLK_SEL] = imx_clk_mux("fast_clk_sel", CCM_CCSR, 5, 1, fast_sels, ARRAY_SIZE(fast_sels));
- clk[VF610_CLK_PLL1_MAIN] = imx_clk_fixed_factor("pll1_main", "fast_clk_sel", 22, 1);
- clk[VF610_CLK_PLL1_PFD1] = imx_clk_pfd("pll1_pfd1", "pll1_main", PFD_PLL1_BASE, 0);
- clk[VF610_CLK_PLL1_PFD2] = imx_clk_pfd("pll1_pfd2", "pll1_main", PFD_PLL1_BASE, 1);
- clk[VF610_CLK_PLL1_PFD3] = imx_clk_pfd("pll1_pfd3", "pll1_main", PFD_PLL1_BASE, 2);
- clk[VF610_CLK_PLL1_PFD4] = imx_clk_pfd("pll1_pfd4", "pll1_main", PFD_PLL1_BASE, 3);
-
- clk[VF610_CLK_PLL2_MAIN] = imx_clk_fixed_factor("pll2_main", "fast_clk_sel", 22, 1);
- clk[VF610_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_main", PFD_PLL2_BASE, 0);
- clk[VF610_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_main", PFD_PLL2_BASE, 1);
- clk[VF610_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3", "pll2_main", PFD_PLL2_BASE, 2);
- clk[VF610_CLK_PLL2_PFD4] = imx_clk_pfd("pll2_pfd4", "pll2_main", PFD_PLL2_BASE, 3);
-
- clk[VF610_CLK_PLL3_MAIN] = imx_clk_fixed_factor("pll3_main", "fast_clk_sel", 20, 1);
- clk[VF610_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_main", PFD_PLL3_BASE, 0);
- clk[VF610_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_main", PFD_PLL3_BASE, 1);
- clk[VF610_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_main", PFD_PLL3_BASE, 2);
- clk[VF610_CLK_PLL3_PFD4] = imx_clk_pfd("pll3_pfd4", "pll3_main", PFD_PLL3_BASE, 3);
-
- clk[VF610_CLK_PLL4_MAIN] = imx_clk_fixed_factor("pll4_main", "fast_clk_sel", 25, 1);
- /* Enet pll: fixed 50Mhz */
- clk[VF610_CLK_PLL5_MAIN] = imx_clk_fixed_factor("pll5_main", "fast_clk_sel", 125, 6);
- /* pll6: default 960Mhz */
- clk[VF610_CLK_PLL6_MAIN] = imx_clk_fixed_factor("pll6_main", "fast_clk_sel", 40, 1);
- /* pll7: USB1 PLL at 480MHz */
- clk[VF610_CLK_PLL7_MAIN] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_main", "fast_clk_sel", PLL7_CTRL, 0x2);
+ clk[VF610_CLK_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", PLL1_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", PLL2_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", PLL3_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", PLL4_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", PLL5_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", PLL6_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+ clk[VF610_CLK_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", PLL7_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels));
+
+ clk[VF610_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll1", "pll1_bypass_src", PLL1_CTRL, 0x1);
+ clk[VF610_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", PLL2_CTRL, 0x1);
+ clk[VF610_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", PLL3_CTRL, 0x1);
+ clk[VF610_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", PLL4_CTRL, 0x7f);
+ clk[VF610_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll5", "pll5_bypass_src", PLL5_CTRL, 0x3);
+ clk[VF610_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_AV, "pll6", "pll6_bypass_src", PLL6_CTRL, 0x7f);
+ clk[VF610_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", PLL7_CTRL, 0x1);
+
+ clk[VF610_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", PLL1_CTRL, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", PLL2_CTRL, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", PLL3_CTRL, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", PLL4_CTRL, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", PLL5_CTRL, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", PLL6_CTRL, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT);
+ clk[VF610_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", PLL7_CTRL, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT);
+
+ /* Do not bypass PLLs initially */
+ clk_set_parent(clk[VF610_PLL1_BYPASS], clk[VF610_CLK_PLL1]);
+ clk_set_parent(clk[VF610_PLL2_BYPASS], clk[VF610_CLK_PLL2]);
+ clk_set_parent(clk[VF610_PLL3_BYPASS], clk[VF610_CLK_PLL3]);
+ clk_set_parent(clk[VF610_PLL4_BYPASS], clk[VF610_CLK_PLL4]);
+ clk_set_parent(clk[VF610_PLL5_BYPASS], clk[VF610_CLK_PLL5]);
+ clk_set_parent(clk[VF610_PLL6_BYPASS], clk[VF610_CLK_PLL6]);
+ clk_set_parent(clk[VF610_PLL7_BYPASS], clk[VF610_CLK_PLL7]);
+
+ clk[VF610_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", PLL1_CTRL, 13);
+ clk[VF610_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", PLL2_CTRL, 13);
+ clk[VF610_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", PLL3_CTRL, 13);
+ clk[VF610_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", PLL4_CTRL, 13);
+ clk[VF610_CLK_PLL5_ENET] = imx_clk_gate("pll5_enet", "pll5_bypass", PLL5_CTRL, 13);
+ clk[VF610_CLK_PLL6_VIDEO] = imx_clk_gate("pll6_video", "pll6_bypass", PLL6_CTRL, 13);
+ clk[VF610_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", PLL7_CTRL, 13);
+
+ clk[VF610_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", ANA_MISC1, 12, BIT(10));
+
+ clk[VF610_CLK_PLL1_PFD1] = imx_clk_pfd("pll1_pfd1", "pll1_sys", PFD_PLL1_BASE, 0);
+ clk[VF610_CLK_PLL1_PFD2] = imx_clk_pfd("pll1_pfd2", "pll1_sys", PFD_PLL1_BASE, 1);
+ clk[VF610_CLK_PLL1_PFD3] = imx_clk_pfd("pll1_pfd3", "pll1_sys", PFD_PLL1_BASE, 2);
+ clk[VF610_CLK_PLL1_PFD4] = imx_clk_pfd("pll1_pfd4", "pll1_sys", PFD_PLL1_BASE, 3);
+
+ clk[VF610_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_bus", PFD_PLL2_BASE, 0);
+ clk[VF610_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_bus", PFD_PLL2_BASE, 1);
+ clk[VF610_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3", "pll2_bus", PFD_PLL2_BASE, 2);
+ clk[VF610_CLK_PLL2_PFD4] = imx_clk_pfd("pll2_pfd4", "pll2_bus", PFD_PLL2_BASE, 3);
+
+ clk[VF610_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_usb_otg", PFD_PLL3_BASE, 0);
+ clk[VF610_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_usb_otg", PFD_PLL3_BASE, 1);
+ clk[VF610_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_usb_otg", PFD_PLL3_BASE, 2);
+ clk[VF610_CLK_PLL3_PFD4] = imx_clk_pfd("pll3_pfd4", "pll3_usb_otg", PFD_PLL3_BASE, 3);
clk[VF610_CLK_PLL1_PFD_SEL] = imx_clk_mux("pll1_pfd_sel", CCM_CCSR, 16, 3, pll1_sels, 5);
clk[VF610_CLK_PLL2_PFD_SEL] = imx_clk_mux("pll2_pfd_sel", CCM_CCSR, 19, 3, pll2_sels, 5);
clk[VF610_CLK_PLATFORM_BUS] = imx_clk_divider("platform_bus", "sys_bus", CCM_CACRR, 3, 3);
clk[VF610_CLK_IPG_BUS] = imx_clk_divider("ipg_bus", "platform_bus", CCM_CACRR, 11, 2);
- clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_main_div", "pll3_main", CCM_CACRR, 20, 1);
- clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_main_div", "pll4_main", 0, CCM_CACRR, 6, 3, 0, pll4_main_div_table, &imx_ccm_lock);
- clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_main_div", "pll6_main", CCM_CACRR, 21, 1);
+ clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_usb_otg_div", "pll3_usb_otg", CCM_CACRR, 20, 1);
+ clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_audio_div", "pll4_audio", 0, CCM_CACRR, 6, 3, 0, pll4_audio_div_table, &imx_ccm_lock);
+ clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_video_div", "pll6_video", CCM_CACRR, 21, 1);
- clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_main", PLL3_CTRL, 6);
- clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_main", PLL7_CTRL, 6);
+ clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_usb_otg", PLL3_CTRL, 6);
+ clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_usb_host", PLL7_CTRL, 6);
clk[VF610_CLK_USBC0] = imx_clk_gate2("usbc0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(4));
clk[VF610_CLK_USBC1] = imx_clk_gate2("usbc1", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(4));
clk[VF610_CLK_QSPI1_X1_DIV] = imx_clk_divider("qspi1_x1", "qspi1_x2", CCM_CSCDR3, 11, 1);
clk[VF610_CLK_QSPI1] = imx_clk_gate2("qspi1", "qspi1_x1", CCM_CCGR8, CCM_CCGRx_CGn(4));
- clk[VF610_CLK_ENET_50M] = imx_clk_fixed_factor("enet_50m", "pll5_main", 1, 10);
- clk[VF610_CLK_ENET_25M] = imx_clk_fixed_factor("enet_25m", "pll5_main", 1, 20);
+ clk[VF610_CLK_ENET_50M] = imx_clk_fixed_factor("enet_50m", "pll5_enet", 1, 10);
+ clk[VF610_CLK_ENET_25M] = imx_clk_fixed_factor("enet_25m", "pll5_enet", 1, 20);
clk[VF610_CLK_ENET_SEL] = imx_clk_mux("enet_sel", CCM_CSCMR2, 4, 2, rmii_sels, 4);
clk[VF610_CLK_ENET_TS_SEL] = imx_clk_mux("enet_ts_sel", CCM_CSCMR2, 0, 3, enet_ts_sels, 7);
clk[VF610_CLK_ENET] = imx_clk_gate("enet", "enet_sel", CCM_CSCDR1, 24);
CLK_SET_RATE_PARENT, mult, div);
}
+struct clk *imx_clk_cpu(const char *name, const char *parent_name,
+ struct clk *div, struct clk *mux, struct clk *pll,
+ struct clk *step);
+
#endif
void mxc_set_cpu_type(unsigned int type);
void mxc_restart(enum reboot_mode, const char *);
void mxc_arch_reset_init(void __iomem *);
-void mxc_arch_reset_init_dt(void);
int mx51_revision(void);
int mx53_revision(void);
void imx_set_aips(void __iomem *);
void imx_gpc_post_resume(void);
void imx_gpc_mask_all(void);
void imx_gpc_restore_all(void);
-void imx_gpc_irq_mask(struct irq_data *d);
-void imx_gpc_irq_unmask(struct irq_data *d);
+void imx_gpc_hwirq_mask(unsigned int hwirq);
+void imx_gpc_hwirq_unmask(unsigned int hwirq);
void imx_anatop_init(void);
void imx_anatop_pre_suspend(void);
void imx_anatop_post_resume(void);
int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode);
void imx6q_set_int_mem_clk_lpm(bool enable);
void imx6sl_set_wait_clk(bool enter);
+int imx_mmdc_get_ddr_type(void);
void imx_cpu_die(unsigned int cpu);
int imx_cpu_kill(unsigned int cpu);
#endif
extern struct smp_operations imx_smp_ops;
+extern struct smp_operations ls1021a_smp_ops;
#endif
static int imx_gpc_irq_set_wake(struct irq_data *d, unsigned int on)
{
- unsigned int idx = d->irq / 32 - 1;
+ unsigned int idx = d->hwirq / 32 - 1;
u32 mask;
/* Sanity check for SPI irq */
- if (d->irq < 32)
+ if (d->hwirq < 32)
return -EINVAL;
- mask = 1 << d->irq % 32;
+ mask = 1 << d->hwirq % 32;
gpc_wake_irqs[idx] = on ? gpc_wake_irqs[idx] | mask :
gpc_wake_irqs[idx] & ~mask;
writel_relaxed(gpc_saved_imrs[i], reg_imr1 + i * 4);
}
-void imx_gpc_irq_unmask(struct irq_data *d)
+void imx_gpc_hwirq_unmask(unsigned int hwirq)
{
void __iomem *reg;
u32 val;
- /* Sanity check for SPI irq */
- if (d->irq < 32)
- return;
-
- reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
+ reg = gpc_base + GPC_IMR1 + (hwirq / 32 - 1) * 4;
val = readl_relaxed(reg);
- val &= ~(1 << d->irq % 32);
+ val &= ~(1 << hwirq % 32);
writel_relaxed(val, reg);
}
-void imx_gpc_irq_mask(struct irq_data *d)
+void imx_gpc_hwirq_mask(unsigned int hwirq)
{
void __iomem *reg;
u32 val;
+ reg = gpc_base + GPC_IMR1 + (hwirq / 32 - 1) * 4;
+ val = readl_relaxed(reg);
+ val |= 1 << (hwirq % 32);
+ writel_relaxed(val, reg);
+}
+
+static void imx_gpc_irq_unmask(struct irq_data *d)
+{
+ /* Sanity check for SPI irq */
+ if (d->hwirq < 32)
+ return;
+
+ imx_gpc_hwirq_unmask(d->hwirq);
+}
+
+static void imx_gpc_irq_mask(struct irq_data *d)
+{
/* Sanity check for SPI irq */
- if (d->irq < 32)
+ if (d->hwirq < 32)
return;
- reg = gpc_base + GPC_IMR1 + (d->irq / 32 - 1) * 4;
- val = readl_relaxed(reg);
- val |= 1 << (d->irq % 32);
- writel_relaxed(val, reg);
+ imx_gpc_hwirq_mask(d->hwirq);
}
void __init imx_gpc_init(void)
#include "common.h"
#include "mx25.h"
-static void __init imx25_dt_init(void)
-{
- mxc_arch_reset_init_dt();
-
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
static const char * const imx25_dt_board_compat[] __initconst = {
"fsl,imx25",
NULL
.map_io = mx25_map_io,
.init_early = imx25_init_early,
.init_irq = mx25_init_irq,
- .init_machine = imx25_dt_init,
.dt_compat = imx25_dt_board_compat,
- .restart = mxc_restart,
MACHINE_END
{
struct platform_device_info devinfo = { .name = "cpufreq-dt", };
- mxc_arch_reset_init_dt();
-
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
platform_device_register_full(&devinfo);
.init_irq = mx27_init_irq,
.init_machine = imx27_dt_init,
.dt_compat = imx27_dt_board_compat,
- .restart = mxc_restart,
MACHINE_END
#include "common.h"
#include "mx31.h"
-static void __init imx31_dt_init(void)
-{
- mxc_arch_reset_init_dt();
-
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
static const char * const imx31_dt_board_compat[] __initconst = {
"fsl,imx31",
NULL
.init_early = imx31_init_early,
.init_irq = mx31_init_irq,
.init_time = imx31_dt_timer_init,
- .init_machine = imx31_dt_init,
.dt_compat = imx31_dt_board_compat,
- .restart = mxc_restart,
MACHINE_END
#include "common.h"
#include "mx35.h"
-static void __init imx35_dt_init(void)
-{
- mxc_arch_reset_init_dt();
-
- of_platform_populate(NULL, of_default_bus_match_table,
- NULL, NULL);
-}
-
static void __init imx35_irq_init(void)
{
imx_init_l2cache();
.map_io = mx35_map_io,
.init_early = imx35_init_early,
.init_irq = imx35_irq_init,
- .init_machine = imx35_dt_init,
.dt_compat = imx35_dt_board_compat,
- .restart = mxc_restart,
MACHINE_END
/*
* set the mode for a IOMUX pin.
*/
-int mxc_iomux_mode(unsigned int pin_mode)
+void mxc_iomux_mode(unsigned int pin_mode)
{
- u32 field, l, mode, ret = 0;
+ u32 field;
+ u32 l;
+ u32 mode;
void __iomem *reg;
reg = IOMUXSW_MUX_CTL + (pin_mode & IOMUX_REG_MASK);
__raw_writel(l, reg);
spin_unlock(&gpio_mux_lock);
-
- return ret;
}
/*
* It is called by the setup functions and should not be called directly anymore.
* It is here visible for backward compatibility
*/
-int mxc_iomux_mode(unsigned int pin_mode);
+void mxc_iomux_mode(unsigned int pin_mode);
#define IOMUX_PADNUM_MASK 0x1ff
#define IOMUX_GPIONUM_SHIFT 9
#include "common.h"
-static void __init imx50_dt_init(void)
-{
- mxc_arch_reset_init_dt();
-
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
static const char * const imx50_dt_board_compat[] __initconst = {
"fsl,imx50",
NULL
DT_MACHINE_START(IMX50_DT, "Freescale i.MX50 (Device Tree Support)")
.init_irq = tzic_init_irq,
- .init_machine = imx50_dt_init,
.dt_compat = imx50_dt_board_compat,
- .restart = mxc_restart,
MACHINE_END
{
struct platform_device_info devinfo = { .name = "cpufreq-dt", };
- mxc_arch_reset_init_dt();
imx51_ipu_mipi_setup();
imx_src_init();
.init_machine = imx51_dt_init,
.init_late = imx51_init_late,
.dt_compat = imx51_dt_board_compat,
- .restart = mxc_restart,
MACHINE_END
static void __init imx53_dt_init(void)
{
- mxc_arch_reset_init_dt();
imx_src_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
static void __init imx53_init_late(void)
{
imx53_pm_init();
+
+ platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
}
static const char * const imx53_dt_board_compat[] __initconst = {
.init_machine = imx53_dt_init,
.init_late = imx53_init_late,
.dt_compat = imx53_dt_board_compat,
- .restart = mxc_restart,
MACHINE_END
imx_print_silicon_rev(cpu_is_imx6dl() ? "i.MX6DL" : "i.MX6Q",
imx_get_soc_revision());
- mxc_arch_reset_init_dt();
-
parent = imx_soc_device_init();
if (parent == NULL)
pr_warn("failed to initialize soc device\n");
.init_machine = imx6q_init_machine,
.init_late = imx6q_init_late,
.dt_compat = imx6q_dt_compat,
- .restart = mxc_restart,
MACHINE_END
{
struct device *parent;
- mxc_arch_reset_init_dt();
-
parent = imx_soc_device_init();
if (parent == NULL)
pr_warn("failed to initialize soc device\n");
};
DT_MACHINE_START(IMX6SL, "Freescale i.MX6 SoloLite (Device Tree)")
- .map_io = debug_ll_io_init,
.init_irq = imx6sl_init_irq,
.init_machine = imx6sl_init_machine,
.init_late = imx6sl_init_late,
.dt_compat = imx6sl_dt_compat,
- .restart = mxc_restart,
MACHINE_END
#include <linux/irqchip.h>
#include <linux/of_platform.h>
+#include <linux/phy.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include "common.h"
#include "cpuidle.h"
+static int ar8031_phy_fixup(struct phy_device *dev)
+{
+ u16 val;
+
+ /* Set RGMII IO voltage to 1.8V */
+ phy_write(dev, 0x1d, 0x1f);
+ phy_write(dev, 0x1e, 0x8);
+
+ /* introduce tx clock delay */
+ phy_write(dev, 0x1d, 0x5);
+ val = phy_read(dev, 0x1e);
+ val |= 0x0100;
+ phy_write(dev, 0x1e, val);
+
+ return 0;
+}
+
+#define PHY_ID_AR8031 0x004dd074
+static void __init imx6sx_enet_phy_init(void)
+{
+ if (IS_BUILTIN(CONFIG_PHYLIB))
+ phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff,
+ ar8031_phy_fixup);
+}
+
+static void __init imx6sx_enet_clk_sel(void)
+{
+ struct regmap *gpr;
+
+ gpr = syscon_regmap_lookup_by_compatible("fsl,imx6sx-iomuxc-gpr");
+ if (!IS_ERR(gpr)) {
+ regmap_update_bits(gpr, IOMUXC_GPR1,
+ IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_MASK, 0);
+ regmap_update_bits(gpr, IOMUXC_GPR1,
+ IMX6SX_GPR1_FEC_CLOCK_PAD_DIR_MASK, 0);
+ } else {
+ pr_err("failed to find fsl,imx6sx-iomux-gpr regmap\n");
+ }
+}
+
+static inline void imx6sx_enet_init(void)
+{
+ imx6sx_enet_phy_init();
+ imx6sx_enet_clk_sel();
+}
+
static void __init imx6sx_init_machine(void)
{
struct device *parent;
- mxc_arch_reset_init_dt();
-
parent = imx_soc_device_init();
if (parent == NULL)
pr_warn("failed to initialize soc device\n");
of_platform_populate(NULL, of_default_bus_match_table, NULL, parent);
+ imx6sx_enet_init();
imx_anatop_init();
imx6sx_pm_init();
}
};
DT_MACHINE_START(IMX6SX, "Freescale i.MX6 SoloX (Device Tree)")
- .map_io = debug_ll_io_init,
.init_irq = imx6sx_init_irq,
.init_machine = imx6sx_init_machine,
.dt_compat = imx6sx_dt_compat,
.init_late = imx6sx_init_late,
- .restart = mxc_restart,
MACHINE_END
--- /dev/null
+/*
+ * Copyright 2013-2014 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <asm/mach/arch.h>
+
+#include "common.h"
+
+static const char * const ls1021a_dt_compat[] __initconst = {
+ "fsl,ls1021a",
+ NULL,
+};
+
+DT_MACHINE_START(LS1021A, "Freescale LS1021A")
+ .smp = smp_ops(ls1021a_smp_ops),
+ .dt_compat = ls1021a_dt_compat,
+MACHINE_END
#include <asm/mach/arch.h>
#include <asm/hardware/cache-l2x0.h>
-#include "common.h"
-
-static void __init vf610_init_machine(void)
-{
- mxc_arch_reset_init_dt();
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
static const char * const vf610_dt_compat[] __initconst = {
"fsl,vf610",
NULL,
DT_MACHINE_START(VYBRID_VF610, "Freescale Vybrid VF610 (Device Tree)")
.l2c_aux_val = 0,
.l2c_aux_mask = ~0,
- .init_machine = vf610_init_machine,
.dt_compat = vf610_dt_compat,
- .restart = mxc_restart,
MACHINE_END
#define BP_MMDC_MAPSR_PSD 0
#define BP_MMDC_MAPSR_PSS 4
+#define MMDC_MDMISC 0x18
+#define BM_MMDC_MDMISC_DDR_TYPE 0x18
+#define BP_MMDC_MDMISC_DDR_TYPE 0x3
+
+static int ddr_type;
+
static int imx_mmdc_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
mmdc_base = of_iomap(np, 0);
WARN_ON(!mmdc_base);
+ reg = mmdc_base + MMDC_MDMISC;
+ /* Get ddr type */
+ val = readl_relaxed(reg);
+ ddr_type = (val & BM_MMDC_MDMISC_DDR_TYPE) >>
+ BP_MMDC_MDMISC_DDR_TYPE;
+
reg = mmdc_base + MMDC_MAPSR;
/* Enable automatic power saving */
return 0;
}
+int imx_mmdc_get_ddr_type(void)
+{
+ return ddr_type;
+}
+
static struct of_device_id imx_mmdc_dt_ids[] = {
{ .compatible = "fsl,imx6q-mmdc", },
{ /* sentinel */ }
#define IMX_CHIP_REVISION_3_3 0x33
#define IMX_CHIP_REVISION_UNKNOWN 0xff
+#define IMX_DDR_TYPE_LPDDR2 1
+
#ifndef __ASSEMBLY__
extern unsigned int __mxc_cpu_type;
#endif
*/
#include <linux/init.h>
+#include <linux/of_address.h>
+#include <linux/of.h>
#include <linux/smp.h>
+
#include <asm/cacheflush.h>
#include <asm/page.h>
#include <asm/smp_scu.h>
.cpu_kill = imx_cpu_kill,
#endif
};
+
+#define DCFG_CCSR_SCRATCHRW1 0x200
+
+static int ls1021a_boot_secondary(unsigned int cpu, struct task_struct *idle)
+{
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
+ return 0;
+}
+
+static void __init ls1021a_smp_prepare_cpus(unsigned int max_cpus)
+{
+ struct device_node *np;
+ void __iomem *dcfg_base;
+ unsigned long paddr;
+
+ np = of_find_compatible_node(NULL, NULL, "fsl,ls1021a-dcfg");
+ dcfg_base = of_iomap(np, 0);
+ BUG_ON(!dcfg_base);
+
+ paddr = virt_to_phys(secondary_startup);
+ writel_relaxed(cpu_to_be32(paddr), dcfg_base + DCFG_CCSR_SCRATCHRW1);
+
+ iounmap(dcfg_base);
+}
+
+struct smp_operations ls1021a_smp_ops __initdata = {
+ .smp_prepare_cpus = ls1021a_smp_prepare_cpus,
+ .smp_boot_secondary = ls1021a_boot_secondary,
+};
};
struct imx6_pm_socdata {
- u32 cpu_type;
+ u32 ddr_type;
const char *mmdc_compat;
const char *src_compat;
const char *iomuxc_compat;
};
static const struct imx6_pm_socdata imx6q_pm_data __initconst = {
- .cpu_type = MXC_CPU_IMX6Q,
.mmdc_compat = "fsl,imx6q-mmdc",
.src_compat = "fsl,imx6q-src",
.iomuxc_compat = "fsl,imx6q-iomuxc",
};
static const struct imx6_pm_socdata imx6dl_pm_data __initconst = {
- .cpu_type = MXC_CPU_IMX6DL,
.mmdc_compat = "fsl,imx6q-mmdc",
.src_compat = "fsl,imx6q-src",
.iomuxc_compat = "fsl,imx6dl-iomuxc",
};
static const struct imx6_pm_socdata imx6sl_pm_data __initconst = {
- .cpu_type = MXC_CPU_IMX6SL,
.mmdc_compat = "fsl,imx6sl-mmdc",
.src_compat = "fsl,imx6sl-src",
.iomuxc_compat = "fsl,imx6sl-iomuxc",
};
static const struct imx6_pm_socdata imx6sx_pm_data __initconst = {
- .cpu_type = MXC_CPU_IMX6SX,
.mmdc_compat = "fsl,imx6sx-mmdc",
.src_compat = "fsl,imx6sx-src",
.iomuxc_compat = "fsl,imx6sx-iomuxc",
struct imx6_cpu_pm_info {
phys_addr_t pbase; /* The physical address of pm_info. */
phys_addr_t resume_addr; /* The physical resume address for asm code */
- u32 cpu_type;
+ u32 ddr_type;
u32 pm_info_size; /* Size of pm_info. */
struct imx6_pm_base mmdc_base;
struct imx6_pm_base src_base;
int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode)
{
- struct irq_data *iomuxc_irq_data = irq_get_irq_data(32);
u32 val = readl_relaxed(ccm_base + CLPCR);
val &= ~BM_CLPCR_LPM;
* 3) Software should mask IRQ #32 right after CCM Low-Power mode
* is set (set bits 0-1 of CCM_CLPCR).
*/
- imx_gpc_irq_unmask(iomuxc_irq_data);
+ imx_gpc_hwirq_unmask(32);
writel_relaxed(val, ccm_base + CLPCR);
- imx_gpc_irq_mask(iomuxc_irq_data);
+ imx_gpc_hwirq_mask(32);
return 0;
}
goto pl310_cache_map_failed;
}
- pm_info->cpu_type = socdata->cpu_type;
+ pm_info->ddr_type = imx_mmdc_get_ddr_type();
pm_info->mmdc_io_num = socdata->mmdc_io_num;
mmdc_offset_array = socdata->mmdc_io_offset;
*/
#define PM_INFO_PBASE_OFFSET 0x0
#define PM_INFO_RESUME_ADDR_OFFSET 0x4
-#define PM_INFO_CPU_TYPE_OFFSET 0x8
+#define PM_INFO_DDR_TYPE_OFFSET 0x8
#define PM_INFO_PM_INFO_SIZE_OFFSET 0xC
#define PM_INFO_MX6Q_MMDC_P_OFFSET 0x10
#define PM_INFO_MX6Q_MMDC_V_OFFSET 0x14
ldreq r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET]
ldrne r11, [r0, #PM_INFO_MX6Q_MMDC_P_OFFSET]
- cmp r3, #MXC_CPU_IMX6SL
+ cmp r3, #IMX_DDR_TYPE_LPDDR2
bne 4f
/* reset read FIFO, RST_RD_FIFO */
ENTRY(imx6_suspend)
ldr r1, [r0, #PM_INFO_PBASE_OFFSET]
ldr r2, [r0, #PM_INFO_RESUME_ADDR_OFFSET]
- ldr r3, [r0, #PM_INFO_CPU_TYPE_OFFSET]
+ ldr r3, [r0, #PM_INFO_DDR_TYPE_OFFSET]
ldr r4, [r0, #PM_INFO_PM_INFO_SIZE_OFFSET]
/*
ldr r7, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET]
ldr r8, =PM_INFO_MMDC_IO_VAL_OFFSET
add r8, r8, r0
- /* i.MX6SL's last 3 IOs need special setting */
- cmp r3, #MXC_CPU_IMX6SL
+ /* LPDDR2's last 3 IOs need special setting */
+ cmp r3, #IMX_DDR_TYPE_LPDDR2
subeq r7, r7, #0x3
set_mmdc_io_lpm:
ldr r9, [r8], #0x8
subs r7, r7, #0x1
bne set_mmdc_io_lpm
- cmp r3, #MXC_CPU_IMX6SL
+ cmp r3, #IMX_DDR_TYPE_LPDDR2
bne set_mmdc_io_lpm_done
ldr r6, =0x1000
ldr r9, [r8], #0x8
str r7, [r11, #MX6Q_SRC_GPR1]
str r7, [r11, #MX6Q_SRC_GPR2]
- ldr r3, [r0, #PM_INFO_CPU_TYPE_OFFSET]
+ ldr r3, [r0, #PM_INFO_DDR_TYPE_OFFSET]
mov r5, #0x1
resume_mmdc
clk_prepare(wdog_clk);
}
-void __init mxc_arch_reset_init_dt(void)
-{
- struct device_node *np;
-
- np = of_find_compatible_node(NULL, NULL, "fsl,imx21-wdt");
- wdog_base = of_iomap(np, 0);
- WARN_ON(!wdog_base);
-
- wdog_clk = of_clk_get(np, 0);
- if (IS_ERR(wdog_clk))
- pr_warn("%s: failed to get wdog clock\n", __func__);
- else
- clk_prepare(wdog_clk);
-}
-
#ifdef CONFIG_CACHE_L2X0
void __init imx_init_l2cache(void)
{
+config ARCH_INTEGRATOR
+ bool "ARM Ltd. Integrator family" if (ARCH_MULTI_V4T || ARCH_MULTI_V5 || ARCH_MULTI_V6)
+ select ARM_AMBA
+ select ARM_PATCH_PHYS_VIRT if MMU
+ select AUTO_ZRELADDR
+ select COMMON_CLK
+ select COMMON_CLK_VERSATILE
+ select GENERIC_CLOCKEVENTS
+ select HAVE_TCM
+ select ICST
+ select MFD_SYSCON
+ select MULTI_IRQ_HANDLER
+ select PLAT_VERSATILE
+ select POWER_RESET
+ select POWER_RESET_VERSATILE
+ select POWER_SUPPLY
+ select SOC_INTEGRATOR_CM
+ select SPARSE_IRQ
+ select USE_OF
+ select VERSATILE_FPGA_IRQ
+ help
+ Support for ARM's Integrator platform.
+
if ARCH_INTEGRATOR
menu "Integrator Options"
# Object file lists.
-obj-y := core.o lm.o leds.o
+obj-y := core.o lm.o
obj-$(CONFIG_ARCH_INTEGRATOR_AP) += integrator_ap.o
obj-$(CONFIG_ARCH_INTEGRATOR_CP) += integrator_cp.o
#define CM_CTRL_LED (1 << 0)
#define CM_CTRL_nMBDET (1 << 1)
#define CM_CTRL_REMAP (1 << 2)
-#define CM_CTRL_RESET (1 << 3)
/*
* Integrator/AP,PP2 specific
void integrator_init_early(void);
int integrator_init(bool is_cp);
void integrator_reserve(void);
-void integrator_restart(enum reboot_mode, const char *);
-void integrator_init_sysfs(struct device *parent, u32 id);
raw_spin_unlock_irqrestore(&cm_lock, flags);
}
-static const char *integrator_arch_str(u32 id)
-{
- switch ((id >> 16) & 0xff) {
- case 0x00:
- return "ASB little-endian";
- case 0x01:
- return "AHB little-endian";
- case 0x03:
- return "AHB-Lite system bus, bi-endian";
- case 0x04:
- return "AHB";
- case 0x08:
- return "AHB system bus, ASB processor bus";
- default:
- return "Unknown";
- }
-}
-
-static const char *integrator_fpga_str(u32 id)
-{
- switch ((id >> 12) & 0xf) {
- case 0x01:
- return "XC4062";
- case 0x02:
- return "XC4085";
- case 0x03:
- return "XVC600";
- case 0x04:
- return "EPM7256AE (Altera PLD)";
- default:
- return "Unknown";
- }
-}
-
void cm_clear_irqs(void)
{
/* disable core module IRQs */
void cm_init(void)
{
struct device_node *cm = of_find_matching_node(NULL, cm_match);
- u32 val;
if (!cm) {
pr_crit("no core module node found in device tree\n");
return;
}
cm_clear_irqs();
- val = readl(cm_base + INTEGRATOR_HDR_ID_OFFSET);
- pr_info("Detected ARM core module:\n");
- pr_info(" Manufacturer: %02x\n", (val >> 24));
- pr_info(" Architecture: %s\n", integrator_arch_str(val));
- pr_info(" FPGA: %s\n", integrator_fpga_str(val));
- pr_info(" Build: %02x\n", (val >> 4) & 0xFF);
- pr_info(" Rev: %c\n", ('A' + (val & 0x03)));
}
/*
{
memblock_reserve(PHYS_OFFSET, __pa(swapper_pg_dir) - PHYS_OFFSET);
}
-
-/*
- * To reset, we hit the on-board reset register in the system FPGA
- */
-void integrator_restart(enum reboot_mode mode, const char *cmd)
-{
- cm_control(CM_CTRL_RESET, CM_CTRL_RESET);
-}
-
-static u32 integrator_id;
-
-static ssize_t intcp_get_manf(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- return sprintf(buf, "%02x\n", integrator_id >> 24);
-}
-
-static struct device_attribute intcp_manf_attr =
- __ATTR(manufacturer, S_IRUGO, intcp_get_manf, NULL);
-
-static ssize_t intcp_get_arch(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- return sprintf(buf, "%s\n", integrator_arch_str(integrator_id));
-}
-
-static struct device_attribute intcp_arch_attr =
- __ATTR(architecture, S_IRUGO, intcp_get_arch, NULL);
-
-static ssize_t intcp_get_fpga(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- return sprintf(buf, "%s\n", integrator_fpga_str(integrator_id));
-}
-
-static struct device_attribute intcp_fpga_attr =
- __ATTR(fpga, S_IRUGO, intcp_get_fpga, NULL);
-
-static ssize_t intcp_get_build(struct device *dev,
- struct device_attribute *attr,
- char *buf)
-{
- return sprintf(buf, "%02x\n", (integrator_id >> 4) & 0xFF);
-}
-
-static struct device_attribute intcp_build_attr =
- __ATTR(build, S_IRUGO, intcp_get_build, NULL);
-
-
-
-void integrator_init_sysfs(struct device *parent, u32 id)
-{
- integrator_id = id;
- device_create_file(parent, &intcp_manf_attr);
- device_create_file(parent, &intcp_arch_attr);
- device_create_file(parent, &intcp_fpga_attr);
- device_create_file(parent, &intcp_build_attr);
-}
+++ /dev/null
-/*
- * arch/arm/mach-integrator/include/mach/uncompress.h
- *
- * Copyright (C) 1999 ARM Limited
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#define AMBA_UART_DR (*(volatile unsigned char *)0x16000000)
-#define AMBA_UART_LCRH (*(volatile unsigned char *)0x16000008)
-#define AMBA_UART_LCRM (*(volatile unsigned char *)0x1600000c)
-#define AMBA_UART_LCRL (*(volatile unsigned char *)0x16000010)
-#define AMBA_UART_CR (*(volatile unsigned char *)0x16000014)
-#define AMBA_UART_FR (*(volatile unsigned char *)0x16000018)
-
-/*
- * This does not append a newline
- */
-static void putc(int c)
-{
- while (AMBA_UART_FR & (1 << 5))
- barrier();
-
- AMBA_UART_DR = c;
-}
-
-static inline void flush(void)
-{
- while (AMBA_UART_FR & (1 << 3))
- barrier();
-}
-
-/*
- * nothing to do
- */
-#define arch_decomp_setup()
#include <linux/syscore_ops.h>
#include <linux/amba/bus.h>
#include <linux/amba/kmi.h>
-#include <linux/clocksource.h>
-#include <linux/clockchips.h>
-#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irqchip.h>
#include <linux/mtd/physmap.h>
-#include <linux/clk.h>
#include <linux/platform_data/clk-integrator.h>
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/stat.h>
-#include <linux/sys_soc.h>
#include <linux/termios.h>
-#include <linux/sched_clock.h>
-#include <linux/clk-provider.h>
#include <asm/hardware/arm_timer.h>
#include <asm/setup.h>
static struct map_desc ap_io_desc[] __initdata __maybe_unused = {
{
- .virtual = IO_ADDRESS(INTEGRATOR_CT_BASE),
- .pfn = __phys_to_pfn(INTEGRATOR_CT_BASE),
- .length = SZ_4K,
- .type = MT_DEVICE
- }, {
.virtual = IO_ADDRESS(INTEGRATOR_IC_BASE),
.pfn = __phys_to_pfn(INTEGRATOR_IC_BASE),
.length = SZ_4K,
.set_mctrl = integrator_uart_set_mctrl,
};
-/*
- * Where is the timer (VA)?
- */
-#define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE)
-#define TIMER1_VA_BASE __io_address(INTEGRATOR_TIMER1_BASE)
-#define TIMER2_VA_BASE __io_address(INTEGRATOR_TIMER2_BASE)
-
-static unsigned long timer_reload;
-
-static u64 notrace integrator_read_sched_clock(void)
-{
- return -readl((void __iomem *) TIMER2_VA_BASE + TIMER_VALUE);
-}
-
-static void integrator_clocksource_init(unsigned long inrate,
- void __iomem *base)
-{
- u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
- unsigned long rate = inrate;
-
- if (rate >= 1500000) {
- rate /= 16;
- ctrl |= TIMER_CTRL_DIV16;
- }
-
- writel(0xffff, base + TIMER_LOAD);
- writel(ctrl, base + TIMER_CTRL);
-
- clocksource_mmio_init(base + TIMER_VALUE, "timer2",
- rate, 200, 16, clocksource_mmio_readl_down);
- sched_clock_register(integrator_read_sched_clock, 16, rate);
-}
-
-static void __iomem * clkevt_base;
-
-/*
- * IRQ handler for the timer
- */
-static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = dev_id;
-
- /* clear the interrupt */
- writel(1, clkevt_base + TIMER_INTCLR);
-
- evt->event_handler(evt);
-
- return IRQ_HANDLED;
-}
-
-static void clkevt_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
-{
- u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE;
-
- /* Disable timer */
- writel(ctrl, clkevt_base + TIMER_CTRL);
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- /* Enable the timer and start the periodic tick */
- writel(timer_reload, clkevt_base + TIMER_LOAD);
- ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
- writel(ctrl, clkevt_base + TIMER_CTRL);
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- /* Leave the timer disabled, .set_next_event will enable it */
- ctrl &= ~TIMER_CTRL_PERIODIC;
- writel(ctrl, clkevt_base + TIMER_CTRL);
- break;
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- case CLOCK_EVT_MODE_RESUME:
- default:
- /* Just leave in disabled state */
- break;
- }
-
-}
-
-static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt)
-{
- unsigned long ctrl = readl(clkevt_base + TIMER_CTRL);
-
- writel(ctrl & ~TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
- writel(next, clkevt_base + TIMER_LOAD);
- writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
-
- return 0;
-}
-
-static struct clock_event_device integrator_clockevent = {
- .name = "timer1",
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
- .set_mode = clkevt_set_mode,
- .set_next_event = clkevt_set_next_event,
- .rating = 300,
-};
-
-static struct irqaction integrator_timer_irq = {
- .name = "timer",
- .flags = IRQF_TIMER | IRQF_IRQPOLL,
- .handler = integrator_timer_interrupt,
- .dev_id = &integrator_clockevent,
-};
-
-static void integrator_clockevent_init(unsigned long inrate,
- void __iomem *base, int irq)
-{
- unsigned long rate = inrate;
- unsigned int ctrl = 0;
-
- clkevt_base = base;
- /* Calculate and program a divisor */
- if (rate > 0x100000 * HZ) {
- rate /= 256;
- ctrl |= TIMER_CTRL_DIV256;
- } else if (rate > 0x10000 * HZ) {
- rate /= 16;
- ctrl |= TIMER_CTRL_DIV16;
- }
- timer_reload = rate / HZ;
- writel(ctrl, clkevt_base + TIMER_CTRL);
-
- setup_irq(irq, &integrator_timer_irq);
- clockevents_config_and_register(&integrator_clockevent,
- rate,
- 1,
- 0xffffU);
-}
-
void __init ap_init_early(void)
{
}
-static void __init ap_of_timer_init(void)
-{
- struct device_node *node;
- const char *path;
- void __iomem *base;
- int err;
- int irq;
- struct clk *clk;
- unsigned long rate;
-
- of_clk_init(NULL);
-
- err = of_property_read_string(of_aliases,
- "arm,timer-primary", &path);
- if (WARN_ON(err))
- return;
- node = of_find_node_by_path(path);
- base = of_iomap(node, 0);
- if (WARN_ON(!base))
- return;
-
- clk = of_clk_get(node, 0);
- BUG_ON(IS_ERR(clk));
- clk_prepare_enable(clk);
- rate = clk_get_rate(clk);
-
- writel(0, base + TIMER_CTRL);
- integrator_clocksource_init(rate, base);
-
- err = of_property_read_string(of_aliases,
- "arm,timer-secondary", &path);
- if (WARN_ON(err))
- return;
- node = of_find_node_by_path(path);
- base = of_iomap(node, 0);
- if (WARN_ON(!base))
- return;
- irq = irq_of_parse_and_map(node, 0);
-
- clk = of_clk_get(node, 0);
- BUG_ON(IS_ERR(clk));
- clk_prepare_enable(clk);
- rate = clk_get_rate(clk);
-
- writel(0, base + TIMER_CTRL);
- integrator_clockevent_init(rate, base, irq);
-}
-
static void __init ap_init_irq_of(void)
{
cm_init();
unsigned long sc_dec;
struct device_node *syscon;
struct device_node *ebi;
- struct device *parent;
- struct soc_device *soc_dev;
- struct soc_device_attribute *soc_dev_attr;
- u32 ap_sc_id;
int i;
syscon = of_find_matching_node(NULL, ap_syscon_match);
of_platform_populate(NULL, of_default_bus_match_table,
ap_auxdata_lookup, NULL);
- ap_sc_id = readl(ap_syscon_base);
-
- soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
- if (!soc_dev_attr)
- return;
-
- soc_dev_attr->soc_id = "XVC";
- soc_dev_attr->machine = "Integrator/AP";
- soc_dev_attr->family = "Integrator";
- soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%c",
- 'A' + (ap_sc_id & 0x0f));
-
- soc_dev = soc_device_register(soc_dev_attr);
- if (IS_ERR(soc_dev)) {
- kfree(soc_dev_attr->revision);
- kfree(soc_dev_attr);
- return;
- }
-
- parent = soc_device_to_device(soc_dev);
- integrator_init_sysfs(parent, ap_sc_id);
-
sc_dec = readl(ap_syscon_base + INTEGRATOR_SC_DEC_OFFSET);
for (i = 0; i < 4; i++) {
struct lm_device *lmdev;
.map_io = ap_map_io,
.init_early = ap_init_early,
.init_irq = ap_init_irq_of,
- .init_time = ap_of_timer_init,
.init_machine = ap_init_of,
- .restart = integrator_restart,
.dt_compat = ap_dt_board_compat,
MACHINE_END
#include <linux/of_irq.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
-#include <linux/sys_soc.h>
#include <linux/sched_clock.h>
#include <asm/setup.h>
static void __init intcp_init_of(void)
{
struct device_node *cpcon;
- struct device *parent;
- struct soc_device *soc_dev;
- struct soc_device_attribute *soc_dev_attr;
- u32 intcp_sc_id;
cpcon = of_find_matching_node(NULL, intcp_syscon_match);
if (!cpcon)
of_platform_populate(NULL, of_default_bus_match_table,
intcp_auxdata_lookup, NULL);
-
- intcp_sc_id = readl(intcp_con_base);
-
- soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
- if (!soc_dev_attr)
- return;
-
- soc_dev_attr->soc_id = "XCV";
- soc_dev_attr->machine = "Integrator/CP";
- soc_dev_attr->family = "Integrator";
- soc_dev_attr->revision = kasprintf(GFP_KERNEL, "%c",
- 'A' + (intcp_sc_id & 0x0f));
-
- soc_dev = soc_device_register(soc_dev_attr);
- if (IS_ERR(soc_dev)) {
- kfree(soc_dev_attr->revision);
- kfree(soc_dev_attr);
- return;
- }
-
- parent = soc_device_to_device(soc_dev);
- integrator_init_sysfs(parent, intcp_sc_id);
}
static const char * intcp_dt_board_compat[] = {
.init_early = intcp_init_early,
.init_irq = intcp_init_irq_of,
.init_machine = intcp_init_of,
- .restart = integrator_restart,
.dt_compat = intcp_dt_board_compat,
MACHINE_END
+++ /dev/null
-/*
- * Driver for the 4 user LEDs found on the Integrator AP/CP baseboard
- * Based on Versatile and RealView machine LED code
- *
- * License terms: GNU General Public License (GPL) version 2
- * Author: Bryan Wu <bryan.wu@canonical.com>
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-#include <linux/leds.h>
-
-#include "hardware.h"
-#include "cm.h"
-
-#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
-
-#define ALPHA_REG __io_address(INTEGRATOR_DBG_BASE)
-#define LEDREG (__io_address(INTEGRATOR_DBG_BASE) + INTEGRATOR_DBG_LEDS_OFFSET)
-
-struct integrator_led {
- struct led_classdev cdev;
- u8 mask;
-};
-
-/*
- * The triggers lines up below will only be used if the
- * LED triggers are compiled in.
- */
-static const struct {
- const char *name;
- const char *trigger;
-} integrator_leds[] = {
- { "integrator:green0", "heartbeat", },
- { "integrator:yellow", },
- { "integrator:red", },
- { "integrator:green1", },
- { "integrator:core_module", "cpu0", },
-};
-
-static void integrator_led_set(struct led_classdev *cdev,
- enum led_brightness b)
-{
- struct integrator_led *led = container_of(cdev,
- struct integrator_led, cdev);
- u32 reg = __raw_readl(LEDREG);
-
- if (b != LED_OFF)
- reg |= led->mask;
- else
- reg &= ~led->mask;
-
- while (__raw_readl(ALPHA_REG) & 1)
- cpu_relax();
-
- __raw_writel(reg, LEDREG);
-}
-
-static enum led_brightness integrator_led_get(struct led_classdev *cdev)
-{
- struct integrator_led *led = container_of(cdev,
- struct integrator_led, cdev);
- u32 reg = __raw_readl(LEDREG);
-
- return (reg & led->mask) ? LED_FULL : LED_OFF;
-}
-
-static void cm_led_set(struct led_classdev *cdev,
- enum led_brightness b)
-{
- if (b != LED_OFF)
- cm_control(CM_CTRL_LED, CM_CTRL_LED);
- else
- cm_control(CM_CTRL_LED, 0);
-}
-
-static enum led_brightness cm_led_get(struct led_classdev *cdev)
-{
- u32 reg = cm_get();
-
- return (reg & CM_CTRL_LED) ? LED_FULL : LED_OFF;
-}
-
-static int __init integrator_leds_init(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(integrator_leds); i++) {
- struct integrator_led *led;
-
- led = kzalloc(sizeof(*led), GFP_KERNEL);
- if (!led)
- break;
-
-
- led->cdev.name = integrator_leds[i].name;
-
- if (i == 4) { /* Setting for LED in core module */
- led->cdev.brightness_set = cm_led_set;
- led->cdev.brightness_get = cm_led_get;
- } else {
- led->cdev.brightness_set = integrator_led_set;
- led->cdev.brightness_get = integrator_led_get;
- }
-
- led->cdev.default_trigger = integrator_leds[i].trigger;
- led->mask = BIT(i);
-
- if (led_classdev_register(NULL, &led->cdev) < 0) {
- kfree(led);
- break;
- }
- }
-
- return 0;
-}
-
-/*
- * Since we may have triggers on any subsystem, defer registration
- * until after subsystem_init.
- */
-fs_initcall(integrator_leds_init);
-#endif
return (void __iomem *)addr;
}
-static void ixp4xx_iounmap(void __iomem *addr)
+static void ixp4xx_iounmap(volatile void __iomem *addr)
{
if (!is_pci_memory((__force u32)addr))
__iounmap(addr);
#define writew(v, p) __indirect_writew(v, p)
#define writel(v, p) __indirect_writel(v, p)
+#define writeb_relaxed(v, p) __indirect_writeb(v, p)
+#define writew_relaxed(v, p) __indirect_writew(v, p)
+#define writel_relaxed(v, p) __indirect_writel(v, p)
+
#define writesb(p, v, l) __indirect_writesb(p, v, l)
#define writesw(p, v, l) __indirect_writesw(p, v, l)
#define writesl(p, v, l) __indirect_writesl(p, v, l)
#define readw(p) __indirect_readw(p)
#define readl(p) __indirect_readl(p)
+#define readb_relaxed(p) __indirect_readb(p)
+#define readw_relaxed(p) __indirect_readw(p)
+#define readl_relaxed(p) __indirect_readl(p)
+
#define readsb(p, v, l) __indirect_readsb(p, v, l)
#define readsw(p, v, l) __indirect_readsw(p, v, l)
#define readsl(p, v, l) __indirect_readsl(p, v, l)
u32 n, byte_enables, data;
if (!is_pci_memory(addr)) {
- __raw_writeb(value, addr);
+ __raw_writeb(value, p);
return;
}
u32 n, byte_enables, data;
if (!is_pci_memory(addr)) {
- __raw_writew(value, addr);
+ __raw_writew(value, p);
return;
}
u32 n, byte_enables, data;
if (!is_pci_memory(addr))
- return __raw_readb(addr);
+ return __raw_readb(p);
n = addr % 4;
byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL;
u32 n, byte_enables, data;
if (!is_pci_memory(addr))
- return __raw_readw(addr);
+ return __raw_readw(p);
n = addr % 4;
byte_enables = (0xf & ~(BIT(n) | BIT(n+1))) << IXP4XX_PCI_NP_CBE_BESL;
* I/O functions.
*/
+#define outb outb
static inline void outb(u8 value, u32 addr)
{
u32 n, byte_enables, data;
ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
}
+#define outsb outsb
static inline void outsb(u32 io_addr, const u8 *vaddr, u32 count)
{
while (count--)
outb(*vaddr++, io_addr);
}
+#define outw outw
static inline void outw(u16 value, u32 addr)
{
u32 n, byte_enables, data;
ixp4xx_pci_write(addr, byte_enables | NP_CMD_IOWRITE, data);
}
+#define outsw outsw
static inline void outsw(u32 io_addr, const u16 *vaddr, u32 count)
{
while (count--)
outw(cpu_to_le16(*vaddr++), io_addr);
}
+#define outl outl
static inline void outl(u32 value, u32 addr)
{
ixp4xx_pci_write(addr, NP_CMD_IOWRITE, value);
}
+#define outsl outsl
static inline void outsl(u32 io_addr, const u32 *vaddr, u32 count)
{
while (count--)
outl(cpu_to_le32(*vaddr++), io_addr);
}
+#define inb inb
static inline u8 inb(u32 addr)
{
u32 n, byte_enables, data;
return data >> (8*n);
}
+#define insb insb
static inline void insb(u32 io_addr, u8 *vaddr, u32 count)
{
while (count--)
*vaddr++ = inb(io_addr);
}
+#define inw inw
static inline u16 inw(u32 addr)
{
u32 n, byte_enables, data;
return data>>(8*n);
}
+#define insw insw
static inline void insw(u32 io_addr, u16 *vaddr, u32 count)
{
while (count--)
*vaddr++ = le16_to_cpu(inw(io_addr));
}
+#define inl inl
static inline u32 inl(u32 addr)
{
u32 data;
return data;
}
+#define insl insl
static inline void insl(u32 io_addr, u32 *vaddr, u32 count)
{
while (count--)
select COMMON_CLK_KEYSTONE
select ARCH_SUPPORTS_BIG_ENDIAN
select ZONE_DMA if ARM_LPAE
+ select MIGHT_HAVE_PCI
+ select PCI_DOMAINS if PCI
help
Support for boards based on the Texas Instruments Keystone family of
SoCs.
config ARCH_MEDIATEK
- bool "Mediatek MT6589 SoC" if ARCH_MULTI_V7
+ bool "Mediatek MT65xx & MT81xx SoC" if ARCH_MULTI_V7
select ARM_GIC
select MTK_TIMER
help
- Support for Mediatek Cortex-A7 Quad-Core-SoC MT6589.
+ Support for Mediatek MT65xx & MT81xx SoCs
static const char * const mediatek_board_dt_compat[] = {
"mediatek,mt6589",
+ "mediatek,mt6592",
+ "mediatek,mt8127",
+ "mediatek,mt8135",
NULL,
};
bool "Amlogic Meson SoCs" if ARCH_MULTI_V7
select GENERIC_IRQ_CHIP
select ARM_GIC
+ select CACHE_L2X0
if ARCH_MESON
default ARCH_MESON
select MESON6_TIMER
+config MACH_MESON8
+ bool "Amlogic Meson8 SoCs support"
+ default ARCH_MESON
+ select MESON6_TIMER
+
endif
#include <linux/of_platform.h>
#include <asm/mach/arch.h>
-static const char * const m6_common_board_compat[] = {
+static const char * const meson_common_board_compat[] = {
"amlogic,meson6",
+ "amlogic,meson8",
NULL,
};
-DT_MACHINE_START(AML8726_MX, "Amlogic Meson6 platform")
- .dt_compat = m6_common_board_compat,
+DT_MACHINE_START(MESON, "Amlogic Meson platform")
+ .dt_compat = meson_common_board_compat,
+ .l2c_aux_val = 0,
+ .l2c_aux_mask = ~0,
MACHINE_END
-
obj-$(CONFIG_MACH_MVEBU_ANY) += system-controller.o mvebu-soc-id.o
ifeq ($(CONFIG_MACH_MVEBU_V7),y)
-obj-y += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o pmsu_ll.o
+obj-y += cpu-reset.o board-v7.o coherency.o coherency_ll.o pmsu.o pmsu_ll.o pm.o pm-board.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o platsmp-a9.o headsmp-a9.o
endif
#define __MACH_ARMADA_370_XP_H
#ifdef CONFIG_SMP
-#include <linux/cpumask.h>
-
-#define ARMADA_XP_MAX_CPUS 4
-
void armada_xp_secondary_startup(void);
extern struct smp_operations armada_xp_smp_ops;
#endif
-int armada_370_xp_pmsu_idle_enter(unsigned long deepidle);
-
#endif /* __MACH_ARMADA_370_XP_H */
#include <linux/init.h>
#include <linux/clk-provider.h>
#include <linux/of_address.h>
+#include <linux/of_fdt.h>
#include <linux/of_platform.h>
#include <linux/io.h>
#include <linux/clocksource.h>
#include <linux/dma-mapping.h>
+#include <linux/memblock.h>
#include <linux/mbus.h>
#include <linux/signal.h>
#include <linux/slab.h>
return scu_base;
}
+/*
+ * When returning from suspend, the platform goes through the
+ * bootloader, which executes its DDR3 training code. This code has
+ * the unfortunate idea of using the first 10 KB of each DRAM bank to
+ * exercise the RAM and calculate the optimal timings. Therefore, this
+ * area of RAM is overwritten, and shouldn't be used by the kernel if
+ * suspend/resume is supported.
+ */
+
+#ifdef CONFIG_SUSPEND
+#define MVEBU_DDR_TRAINING_AREA_SZ (10 * SZ_1K)
+static int __init mvebu_scan_mem(unsigned long node, const char *uname,
+ int depth, void *data)
+{
+ const char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+ const __be32 *reg, *endp;
+ int l;
+
+ if (type == NULL || strcmp(type, "memory"))
+ return 0;
+
+ reg = of_get_flat_dt_prop(node, "linux,usable-memory", &l);
+ if (reg == NULL)
+ reg = of_get_flat_dt_prop(node, "reg", &l);
+ if (reg == NULL)
+ return 0;
+
+ endp = reg + (l / sizeof(__be32));
+ while ((endp - reg) >= (dt_root_addr_cells + dt_root_size_cells)) {
+ u64 base, size;
+
+ base = dt_mem_next_cell(dt_root_addr_cells, ®);
+ size = dt_mem_next_cell(dt_root_size_cells, ®);
+
+ memblock_reserve(base, MVEBU_DDR_TRAINING_AREA_SZ);
+ }
+
+ return 0;
+}
+
+static void __init mvebu_memblock_reserve(void)
+{
+ of_scan_flat_dt(mvebu_scan_mem, NULL);
+}
+#else
+static void __init mvebu_memblock_reserve(void) {}
+#endif
+
/*
* Early versions of Armada 375 SoC have a bug where the BootROM
* leaves an external data abort pending. The kernel is hit by this
return;
}
-#define A375_Z1_THERMAL_FIXUP_OFFSET 0xc
-
-static void __init thermal_quirk(void)
-{
- struct device_node *np;
- u32 dev, rev;
- int res;
-
- /*
- * The early SoC Z1 revision needs a quirk to be applied in order
- * for the thermal controller to work properly. This quirk breaks
- * the thermal support if applied on a SoC that doesn't need it,
- * so we enforce the SoC revision to be known.
- */
- res = mvebu_get_soc_id(&dev, &rev);
- if (res < 0 || (res == 0 && rev > ARMADA_375_Z1_REV))
- return;
-
- for_each_compatible_node(np, NULL, "marvell,armada375-thermal") {
- struct property *prop;
- __be32 newval, *newprop, *oldprop;
- int len;
-
- /*
- * The register offset is at a wrong location. This quirk
- * creates a new reg property as a clone of the previous
- * one and corrects the offset.
- */
- oldprop = (__be32 *)of_get_property(np, "reg", &len);
- if (!oldprop)
- continue;
-
- /* Create a duplicate of the 'reg' property */
- prop = kzalloc(sizeof(*prop), GFP_KERNEL);
- prop->length = len;
- prop->name = kstrdup("reg", GFP_KERNEL);
- prop->value = kzalloc(len, GFP_KERNEL);
- memcpy(prop->value, oldprop, len);
-
- /* Fixup the register offset of the second entry */
- oldprop += 2;
- newprop = (__be32 *)prop->value + 2;
- newval = cpu_to_be32(be32_to_cpu(*oldprop) -
- A375_Z1_THERMAL_FIXUP_OFFSET);
- *newprop = newval;
- of_update_property(np, prop);
-
- /*
- * The thermal controller needs some quirk too, so let's change
- * the compatible string to reflect this and allow the driver
- * the take the necessary action.
- */
- prop = kzalloc(sizeof(*prop), GFP_KERNEL);
- prop->name = kstrdup("compatible", GFP_KERNEL);
- prop->length = sizeof("marvell,armada375-z1-thermal");
- prop->value = kstrdup("marvell,armada375-z1-thermal",
- GFP_KERNEL);
- of_update_property(np, prop);
- }
- return;
-}
-
static void __init mvebu_dt_init(void)
{
if (of_machine_is_compatible("marvell,armadaxp"))
i2c_quirk();
- if (of_machine_is_compatible("marvell,a375-db")) {
+ if (of_machine_is_compatible("marvell,a375-db"))
external_abort_quirk();
- thermal_quirk();
- }
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
DT_MACHINE_START(ARMADA_370_XP_DT, "Marvell Armada 370/XP (Device Tree)")
.l2c_aux_val = 0,
.l2c_aux_mask = ~0,
+/*
+ * The following field (.smp) is still needed to ensure backward
+ * compatibility with old Device Trees that were not specifying the
+ * cpus enable-method property.
+ */
.smp = smp_ops(armada_xp_smp_ops),
.init_machine = mvebu_dt_init,
.init_irq = mvebu_init_irq,
.restart = mvebu_restart,
+ .reserve = mvebu_memblock_reserve,
.dt_compat = armada_370_xp_dt_compat,
MACHINE_END
/*
- * Coherency fabric (Aurora) support for Armada 370 and XP platforms.
+ * Coherency fabric (Aurora) support for Armada 370, 375, 38x and XP
+ * platforms.
*
* Copyright (C) 2012 Marvell
*
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*
- * The Armada 370 and Armada XP SOCs have a coherency fabric which is
+ * The Armada 370, 375, 38x and XP SOCs have a coherency fabric which is
* responsible for ensuring hardware coherency between all CPUs and between
* CPUs and I/O masters. This file initializes the coherency fabric and
* supplies basic routines for configuring and controlling hardware coherency
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/mbus.h>
-#include <linux/clk.h>
#include <linux/pci.h>
#include <asm/smp_plat.h>
#include <asm/cacheflush.h>
#include <asm/mach/map.h>
-#include "armada-370-xp.h"
#include "coherency.h"
#include "mvebu-soc-id.h"
static void __iomem *coherency_cpu_base;
/* Coherency fabric registers */
-#define COHERENCY_FABRIC_CFG_OFFSET 0x4
-
#define IO_SYNC_BARRIER_CTL_OFFSET 0x0
enum {
return ll_enable_coherency();
}
-/*
- * The below code implements the I/O coherency workaround on Armada
- * 375. This workaround consists in using the two channels of the
- * first XOR engine to trigger a XOR transaction that serves as the
- * I/O coherency barrier.
- */
-
-static void __iomem *xor_base, *xor_high_base;
-static dma_addr_t coherency_wa_buf_phys[CONFIG_NR_CPUS];
-static void *coherency_wa_buf[CONFIG_NR_CPUS];
-static bool coherency_wa_enabled;
-
-#define XOR_CONFIG(chan) (0x10 + (chan * 4))
-#define XOR_ACTIVATION(chan) (0x20 + (chan * 4))
-#define WINDOW_BAR_ENABLE(chan) (0x240 + ((chan) << 2))
-#define WINDOW_BASE(w) (0x250 + ((w) << 2))
-#define WINDOW_SIZE(w) (0x270 + ((w) << 2))
-#define WINDOW_REMAP_HIGH(w) (0x290 + ((w) << 2))
-#define WINDOW_OVERRIDE_CTRL(chan) (0x2A0 + ((chan) << 2))
-#define XOR_DEST_POINTER(chan) (0x2B0 + (chan * 4))
-#define XOR_BLOCK_SIZE(chan) (0x2C0 + (chan * 4))
-#define XOR_INIT_VALUE_LOW 0x2E0
-#define XOR_INIT_VALUE_HIGH 0x2E4
-
-static inline void mvebu_hwcc_armada375_sync_io_barrier_wa(void)
-{
- int idx = smp_processor_id();
-
- /* Write '1' to the first word of the buffer */
- writel(0x1, coherency_wa_buf[idx]);
-
- /* Wait until the engine is idle */
- while ((readl(xor_base + XOR_ACTIVATION(idx)) >> 4) & 0x3)
- ;
-
- dmb();
-
- /* Trigger channel */
- writel(0x1, xor_base + XOR_ACTIVATION(idx));
-
- /* Poll the data until it is cleared by the XOR transaction */
- while (readl(coherency_wa_buf[idx]))
- ;
-}
-
-static void __init armada_375_coherency_init_wa(void)
-{
- const struct mbus_dram_target_info *dram;
- struct device_node *xor_node;
- struct property *xor_status;
- struct clk *xor_clk;
- u32 win_enable = 0;
- int i;
-
- pr_warn("enabling coherency workaround for Armada 375 Z1, one XOR engine disabled\n");
-
- /*
- * Since the workaround uses one XOR engine, we grab a
- * reference to its Device Tree node first.
- */
- xor_node = of_find_compatible_node(NULL, NULL, "marvell,orion-xor");
- BUG_ON(!xor_node);
-
- /*
- * Then we mark it as disabled so that the real XOR driver
- * will not use it.
- */
- xor_status = kzalloc(sizeof(struct property), GFP_KERNEL);
- BUG_ON(!xor_status);
-
- xor_status->value = kstrdup("disabled", GFP_KERNEL);
- BUG_ON(!xor_status->value);
-
- xor_status->length = 8;
- xor_status->name = kstrdup("status", GFP_KERNEL);
- BUG_ON(!xor_status->name);
-
- of_update_property(xor_node, xor_status);
-
- /*
- * And we remap the registers, get the clock, and do the
- * initial configuration of the XOR engine.
- */
- xor_base = of_iomap(xor_node, 0);
- xor_high_base = of_iomap(xor_node, 1);
-
- xor_clk = of_clk_get_by_name(xor_node, NULL);
- BUG_ON(!xor_clk);
-
- clk_prepare_enable(xor_clk);
-
- dram = mv_mbus_dram_info();
-
- for (i = 0; i < 8; i++) {
- writel(0, xor_base + WINDOW_BASE(i));
- writel(0, xor_base + WINDOW_SIZE(i));
- if (i < 4)
- writel(0, xor_base + WINDOW_REMAP_HIGH(i));
- }
-
- for (i = 0; i < dram->num_cs; i++) {
- const struct mbus_dram_window *cs = dram->cs + i;
- writel((cs->base & 0xffff0000) |
- (cs->mbus_attr << 8) |
- dram->mbus_dram_target_id, xor_base + WINDOW_BASE(i));
- writel((cs->size - 1) & 0xffff0000, xor_base + WINDOW_SIZE(i));
-
- win_enable |= (1 << i);
- win_enable |= 3 << (16 + (2 * i));
- }
-
- writel(win_enable, xor_base + WINDOW_BAR_ENABLE(0));
- writel(win_enable, xor_base + WINDOW_BAR_ENABLE(1));
- writel(0, xor_base + WINDOW_OVERRIDE_CTRL(0));
- writel(0, xor_base + WINDOW_OVERRIDE_CTRL(1));
-
- for (i = 0; i < CONFIG_NR_CPUS; i++) {
- coherency_wa_buf[i] = kzalloc(PAGE_SIZE, GFP_KERNEL);
- BUG_ON(!coherency_wa_buf[i]);
-
- /*
- * We can't use the DMA mapping API, since we don't
- * have a valid 'struct device' pointer
- */
- coherency_wa_buf_phys[i] =
- virt_to_phys(coherency_wa_buf[i]);
- BUG_ON(!coherency_wa_buf_phys[i]);
-
- /*
- * Configure the XOR engine for memset operation, with
- * a 128 bytes block size
- */
- writel(0x444, xor_base + XOR_CONFIG(i));
- writel(128, xor_base + XOR_BLOCK_SIZE(i));
- writel(coherency_wa_buf_phys[i],
- xor_base + XOR_DEST_POINTER(i));
- }
-
- writel(0x0, xor_base + XOR_INIT_VALUE_LOW);
- writel(0x0, xor_base + XOR_INIT_VALUE_HIGH);
-
- coherency_wa_enabled = true;
-}
-
static inline void mvebu_hwcc_sync_io_barrier(void)
{
- if (coherency_wa_enabled) {
- mvebu_hwcc_armada375_sync_io_barrier_wa();
- return;
- }
-
writel(0x1, coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET);
while (readl(coherency_cpu_base + IO_SYNC_BARRIER_CTL_OFFSET) & 0x1);
}
{
struct device_node *np;
const struct of_device_id *match;
+ int type;
- np = of_find_matching_node_and_match(NULL, of_coherency_table, &match);
- if (np) {
- int type = (int) match->data;
+ /*
+ * The coherency fabric is needed:
+ * - For coherency between processors on Armada XP, so only
+ * when SMP is enabled.
+ * - For coherency between the processor and I/O devices, but
+ * this coherency requires many pre-requisites (write
+ * allocate cache policy, shareable pages, SMP bit set) that
+ * are only meant in SMP situations.
+ *
+ * Note that this means that on Armada 370, there is currently
+ * no way to use hardware I/O coherency, because even when
+ * CONFIG_SMP is enabled, is_smp() returns false due to the
+ * Armada 370 being a single-core processor. To lift this
+ * limitation, we would have to find a way to make the cache
+ * policy set to write-allocate (on all Armada SoCs), and to
+ * set the shareable attribute in page tables (on all Armada
+ * SoCs except the Armada 370). Unfortunately, such decisions
+ * are taken very early in the kernel boot process, at a point
+ * where we don't know yet on which SoC we are running.
- /* Armada 370/XP coherency works in both UP and SMP */
- if (type == COHERENCY_FABRIC_TYPE_ARMADA_370_XP)
- return type;
+ */
+ if (!is_smp())
+ return COHERENCY_FABRIC_TYPE_NONE;
- /* Armada 375 coherency works only on SMP */
- else if (type == COHERENCY_FABRIC_TYPE_ARMADA_375 && is_smp())
- return type;
+ np = of_find_matching_node_and_match(NULL, of_coherency_table, &match);
+ if (!np)
+ return COHERENCY_FABRIC_TYPE_NONE;
- /* Armada 380 coherency works only on SMP */
- else if (type == COHERENCY_FABRIC_TYPE_ARMADA_380 && is_smp())
- return type;
- }
+ type = (int) match->data;
- return COHERENCY_FABRIC_TYPE_NONE;
+ of_node_put(np);
+
+ return type;
}
int coherency_available(void)
type == COHERENCY_FABRIC_TYPE_ARMADA_380)
armada_375_380_coherency_init(np);
+ of_node_put(np);
+
return 0;
}
static int __init coherency_late_init(void)
{
- int type = coherency_type();
-
- if (type == COHERENCY_FABRIC_TYPE_NONE)
- return 0;
-
- if (type == COHERENCY_FABRIC_TYPE_ARMADA_375) {
- u32 dev, rev;
-
- if (mvebu_get_soc_id(&dev, &rev) == 0 &&
- rev == ARMADA_375_Z1_REV)
- armada_375_coherency_init_wa();
- }
-
- bus_register_notifier(&platform_bus_type,
- &mvebu_hwcc_nb);
-
+ if (coherency_available())
+ bus_register_notifier(&platform_bus_type,
+ &mvebu_hwcc_nb);
return 0;
}
#include <asm/cp15.h>
.text
-/* Returns the coherency base address in r1 (r0 is untouched) */
+/*
+ * Returns the coherency base address in r1 (r0 is untouched), or 0 if
+ * the coherency fabric is not enabled.
+ */
ENTRY(ll_get_coherency_base)
mrc p15, 0, r1, c1, c0, 0
tst r1, #CR_M @ Check MMU bit enabled
/*
* MMU is disabled, use the physical address of the coherency
- * base address.
+ * base address. However, if the coherency fabric isn't mapped
+ * (i.e its virtual address is zero), it means coherency is
+ * not enabled, so we return 0.
*/
+ ldr r1, =coherency_base
+ cmp r1, #0
+ beq 2f
adr r1, 3f
ldr r3, [r1]
ldr r1, [r1, r3]
*/
mov r0, lr
bl ll_get_coherency_base
+ /* Bail out if the coherency is not enabled */
+ cmp r1, #0
+ reteq r0
bl ll_get_coherency_cpumask
mov lr, r0
add r0, r1, #ARMADA_XP_CFB_CFG_REG_OFFSET
*/
mov r0, lr
bl ll_get_coherency_base
+ /* Bail out if the coherency is not enabled */
+ cmp r1, #0
+ reteq r0
bl ll_get_coherency_cpumask
mov lr, r0
add r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET
*/
mov r0, lr
bl ll_get_coherency_base
+ /* Bail out if the coherency is not enabled */
+ cmp r1, #0
+ reteq r0
bl ll_get_coherency_cpumask
mov lr, r0
add r0, r1, #ARMADA_XP_CFB_CTL_REG_OFFSET
void __iomem *mvebu_get_scu_base(void);
+int mvebu_pm_init(void (*board_pm_enter)(void __iomem *sdram_reg, u32 srcmd));
+
#endif
#include <linux/of_address.h>
#include <linux/io.h>
#include <linux/resource.h>
-#include "armada-370-xp.h"
static void __iomem *cpu_reset_base;
static size_t cpu_reset_size;
ENTRY(mvebu_cortex_a9_secondary_startup)
ARM_BE8(setend be)
bl v7_invalidate_l1
+ bl armada_38x_scu_power_up
b secondary_startup
ENDPROC(mvebu_cortex_a9_secondary_startup)
else
mvebu_pmsu_set_cpu_boot_addr(hw_cpu, mvebu_cortex_a9_secondary_startup);
smp_wmb();
+
+ /*
+ * Doing this before deasserting the CPUs is needed to wake up CPUs
+ * in the offline state after using CPU hotplug.
+ */
+ arch_send_wakeup_ipi_mask(cpumask_of(cpu));
+
ret = mvebu_cpu_reset_deassert(hw_cpu);
if (ret) {
pr_err("Could not start the secondary CPU: %d\n", ret);
return ret;
}
- arch_send_wakeup_ipi_mask(cpumask_of(cpu));
return 0;
}
+/*
+ * When a CPU is brought back online, either through CPU hotplug, or
+ * because of the boot of a kexec'ed kernel, the PMSU configuration
+ * for this CPU might be in the deep idle state, preventing this CPU
+ * from receiving interrupts. Here, we therefore take out the current
+ * CPU from this state, which was entered by armada_38x_cpu_die()
+ * below.
+ */
+static void armada_38x_secondary_init(unsigned int cpu)
+{
+ mvebu_v7_pmsu_idle_exit();
+}
+
+#ifdef CONFIG_HOTPLUG_CPU
+static void armada_38x_cpu_die(unsigned int cpu)
+{
+ /*
+ * CPU hotplug is implemented by putting offline CPUs into the
+ * deep idle sleep state.
+ */
+ armada_38x_do_cpu_suspend(true);
+}
+
+/*
+ * We need a dummy function, so that platform_can_cpu_hotplug() knows
+ * we support CPU hotplug. However, the function does not need to do
+ * anything, because CPUs going offline can enter the deep idle state
+ * by themselves, without any help from a still alive CPU.
+ */
+static int armada_38x_cpu_kill(unsigned int cpu)
+{
+ return 1;
+}
+#endif
static struct smp_operations mvebu_cortex_a9_smp_ops __initdata = {
.smp_boot_secondary = mvebu_cortex_a9_boot_secondary,
};
+static struct smp_operations armada_38x_smp_ops __initdata = {
+ .smp_boot_secondary = mvebu_cortex_a9_boot_secondary,
+ .smp_secondary_init = armada_38x_secondary_init,
+#ifdef CONFIG_HOTPLUG_CPU
+ .cpu_die = armada_38x_cpu_die,
+ .cpu_kill = armada_38x_cpu_kill,
+#endif
+};
+
CPU_METHOD_OF_DECLARE(mvebu_armada_375_smp, "marvell,armada-375-smp",
&mvebu_cortex_a9_smp_ops);
CPU_METHOD_OF_DECLARE(mvebu_armada_380_smp, "marvell,armada-380-smp",
- &mvebu_cortex_a9_smp_ops);
+ &armada_38x_smp_ops);
#include "pmsu.h"
#include "coherency.h"
+#define ARMADA_XP_MAX_CPUS 4
+
#define AXP_BOOTROM_BASE 0xfff00000
#define AXP_BOOTROM_SIZE 0x100000
-static struct clk *__init get_cpu_clk(int cpu)
+static struct clk *get_cpu_clk(int cpu)
{
struct clk *cpu_clk;
struct device_node *np = of_get_cpu_node(cpu, NULL);
return cpu_clk;
}
-static void __init set_secondary_cpus_clock(void)
+static void set_secondary_cpu_clock(unsigned int cpu)
{
- int thiscpu, cpu;
+ int thiscpu;
unsigned long rate;
struct clk *cpu_clk;
- thiscpu = smp_processor_id();
+ thiscpu = get_cpu();
+
cpu_clk = get_cpu_clk(thiscpu);
if (!cpu_clk)
- return;
+ goto out;
clk_prepare_enable(cpu_clk);
rate = clk_get_rate(cpu_clk);
- /* set all the other CPU clk to the same rate than the boot CPU */
- for_each_possible_cpu(cpu) {
- if (cpu == thiscpu)
- continue;
- cpu_clk = get_cpu_clk(cpu);
- if (!cpu_clk)
- return;
- clk_set_rate(cpu_clk, rate);
- clk_prepare_enable(cpu_clk);
- }
+ cpu_clk = get_cpu_clk(cpu);
+ if (!cpu_clk)
+ goto out;
+ clk_set_rate(cpu_clk, rate);
+ clk_prepare_enable(cpu_clk);
+
+out:
+ put_cpu();
}
static int armada_xp_boot_secondary(unsigned int cpu, struct task_struct *idle)
pr_info("Booting CPU %d\n", cpu);
hw_cpu = cpu_logical_map(cpu);
+ set_secondary_cpu_clock(hw_cpu);
mvebu_pmsu_set_cpu_boot_addr(hw_cpu, armada_xp_secondary_startup);
/*
struct resource res;
int err;
- set_secondary_cpus_clock();
flush_cache_all();
set_cpu_coherent();
--- /dev/null
+/*
+ * Board-level suspend/resume support.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_gpio.h>
+#include <linux/slab.h>
+#include "common.h"
+
+#define ARMADA_XP_GP_PIC_NR_GPIOS 3
+
+static void __iomem *gpio_ctrl;
+static int pic_gpios[ARMADA_XP_GP_PIC_NR_GPIOS];
+static int pic_raw_gpios[ARMADA_XP_GP_PIC_NR_GPIOS];
+
+static void mvebu_armada_xp_gp_pm_enter(void __iomem *sdram_reg, u32 srcmd)
+{
+ u32 reg, ackcmd;
+ int i;
+
+ /* Put 001 as value on the GPIOs */
+ reg = readl(gpio_ctrl);
+ for (i = 0; i < ARMADA_XP_GP_PIC_NR_GPIOS; i++)
+ reg &= ~BIT(pic_raw_gpios[i]);
+ reg |= BIT(pic_raw_gpios[0]);
+ writel(reg, gpio_ctrl);
+
+ /* Prepare writing 111 to the GPIOs */
+ ackcmd = readl(gpio_ctrl);
+ for (i = 0; i < ARMADA_XP_GP_PIC_NR_GPIOS; i++)
+ ackcmd |= BIT(pic_raw_gpios[i]);
+
+ /*
+ * Wait a while, the PIC needs quite a bit of time between the
+ * two GPIO commands.
+ */
+ mdelay(3000);
+
+ asm volatile (
+ /* Align to a cache line */
+ ".balign 32\n\t"
+
+ /* Enter self refresh */
+ "str %[srcmd], [%[sdram_reg]]\n\t"
+
+ /*
+ * Wait 100 cycles for DDR to enter self refresh, by
+ * doing 50 times two instructions.
+ */
+ "mov r1, #50\n\t"
+ "1: subs r1, r1, #1\n\t"
+ "bne 1b\n\t"
+
+ /* Issue the command ACK */
+ "str %[ackcmd], [%[gpio_ctrl]]\n\t"
+
+ /* Trap the processor */
+ "b .\n\t"
+ : : [srcmd] "r" (srcmd), [sdram_reg] "r" (sdram_reg),
+ [ackcmd] "r" (ackcmd), [gpio_ctrl] "r" (gpio_ctrl) : "r1");
+}
+
+static int mvebu_armada_xp_gp_pm_init(void)
+{
+ struct device_node *np;
+ struct device_node *gpio_ctrl_np;
+ int ret = 0, i;
+
+ if (!of_machine_is_compatible("marvell,axp-gp"))
+ return -ENODEV;
+
+ np = of_find_node_by_name(NULL, "pm_pic");
+ if (!np)
+ return -ENODEV;
+
+ for (i = 0; i < ARMADA_XP_GP_PIC_NR_GPIOS; i++) {
+ char *name;
+ struct of_phandle_args args;
+
+ pic_gpios[i] = of_get_named_gpio(np, "ctrl-gpios", i);
+ if (pic_gpios[i] < 0) {
+ ret = -ENODEV;
+ goto out;
+ }
+
+ name = kasprintf(GFP_KERNEL, "pic-pin%d", i);
+ if (!name) {
+ ret = -ENOMEM;
+ goto out;
+ }
+
+ ret = gpio_request(pic_gpios[i], name);
+ if (ret < 0) {
+ kfree(name);
+ goto out;
+ }
+
+ ret = gpio_direction_output(pic_gpios[i], 0);
+ if (ret < 0) {
+ gpio_free(pic_gpios[i]);
+ kfree(name);
+ goto out;
+ }
+
+ ret = of_parse_phandle_with_fixed_args(np, "ctrl-gpios", 2,
+ i, &args);
+ if (ret < 0) {
+ gpio_free(pic_gpios[i]);
+ kfree(name);
+ goto out;
+ }
+
+ gpio_ctrl_np = args.np;
+ pic_raw_gpios[i] = args.args[0];
+ }
+
+ gpio_ctrl = of_iomap(gpio_ctrl_np, 0);
+ if (!gpio_ctrl)
+ return -ENOMEM;
+
+ mvebu_pm_init(mvebu_armada_xp_gp_pm_enter);
+
+out:
+ of_node_put(np);
+ return ret;
+}
+
+late_initcall(mvebu_armada_xp_gp_pm_init);
--- /dev/null
+/*
+ * Suspend/resume support. Currently supporting Armada XP only.
+ *
+ * Copyright (C) 2014 Marvell
+ *
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/cpu_pm.h>
+#include <linux/delay.h>
+#include <linux/gpio.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/mbus.h>
+#include <linux/of_address.h>
+#include <linux/suspend.h>
+#include <asm/cacheflush.h>
+#include <asm/outercache.h>
+#include <asm/suspend.h>
+
+#include "coherency.h"
+#include "pmsu.h"
+
+#define SDRAM_CONFIG_OFFS 0x0
+#define SDRAM_CONFIG_SR_MODE_BIT BIT(24)
+#define SDRAM_OPERATION_OFFS 0x18
+#define SDRAM_OPERATION_SELF_REFRESH 0x7
+#define SDRAM_DLB_EVICTION_OFFS 0x30c
+#define SDRAM_DLB_EVICTION_THRESHOLD_MASK 0xff
+
+static void (*mvebu_board_pm_enter)(void __iomem *sdram_reg, u32 srcmd);
+static void __iomem *sdram_ctrl;
+
+static int mvebu_pm_powerdown(unsigned long data)
+{
+ u32 reg, srcmd;
+
+ flush_cache_all();
+ outer_flush_all();
+
+ /*
+ * Issue a Data Synchronization Barrier instruction to ensure
+ * that all state saving has been completed.
+ */
+ dsb();
+
+ /* Flush the DLB and wait ~7 usec */
+ reg = readl(sdram_ctrl + SDRAM_DLB_EVICTION_OFFS);
+ reg &= ~SDRAM_DLB_EVICTION_THRESHOLD_MASK;
+ writel(reg, sdram_ctrl + SDRAM_DLB_EVICTION_OFFS);
+
+ udelay(7);
+
+ /* Set DRAM in battery backup mode */
+ reg = readl(sdram_ctrl + SDRAM_CONFIG_OFFS);
+ reg &= ~SDRAM_CONFIG_SR_MODE_BIT;
+ writel(reg, sdram_ctrl + SDRAM_CONFIG_OFFS);
+
+ /* Prepare to go to self-refresh */
+
+ srcmd = readl(sdram_ctrl + SDRAM_OPERATION_OFFS);
+ srcmd &= ~0x1F;
+ srcmd |= SDRAM_OPERATION_SELF_REFRESH;
+
+ mvebu_board_pm_enter(sdram_ctrl + SDRAM_OPERATION_OFFS, srcmd);
+
+ return 0;
+}
+
+#define BOOT_INFO_ADDR 0x3000
+#define BOOT_MAGIC_WORD 0xdeadb002
+#define BOOT_MAGIC_LIST_END 0xffffffff
+
+/*
+ * Those registers are accessed before switching the internal register
+ * base, which is why we hardcode the 0xd0000000 base address, the one
+ * used by the SoC out of reset.
+ */
+#define MBUS_WINDOW_12_CTRL 0xd00200b0
+#define MBUS_INTERNAL_REG_ADDRESS 0xd0020080
+
+#define SDRAM_WIN_BASE_REG(x) (0x20180 + (0x8*x))
+#define SDRAM_WIN_CTRL_REG(x) (0x20184 + (0x8*x))
+
+static phys_addr_t mvebu_internal_reg_base(void)
+{
+ struct device_node *np;
+ __be32 in_addr[2];
+
+ np = of_find_node_by_name(NULL, "internal-regs");
+ BUG_ON(!np);
+
+ /*
+ * Ask the DT what is the internal register address on this
+ * platform. In the mvebu-mbus DT binding, 0xf0010000
+ * corresponds to the internal register window.
+ */
+ in_addr[0] = cpu_to_be32(0xf0010000);
+ in_addr[1] = 0x0;
+
+ return of_translate_address(np, in_addr);
+}
+
+static void mvebu_pm_store_bootinfo(void)
+{
+ u32 *store_addr;
+ phys_addr_t resume_pc;
+
+ store_addr = phys_to_virt(BOOT_INFO_ADDR);
+ resume_pc = virt_to_phys(armada_370_xp_cpu_resume);
+
+ /*
+ * The bootloader expects the first two words to be a magic
+ * value (BOOT_MAGIC_WORD), followed by the address of the
+ * resume code to jump to. Then, it expects a sequence of
+ * (address, value) pairs, which can be used to restore the
+ * value of certain registers. This sequence must end with the
+ * BOOT_MAGIC_LIST_END magic value.
+ */
+
+ writel(BOOT_MAGIC_WORD, store_addr++);
+ writel(resume_pc, store_addr++);
+
+ /*
+ * Some platforms remap their internal register base address
+ * to 0xf1000000. However, out of reset, window 12 starts at
+ * 0xf0000000 and ends at 0xf7ffffff, which would overlap with
+ * the internal registers. Therefore, disable window 12.
+ */
+ writel(MBUS_WINDOW_12_CTRL, store_addr++);
+ writel(0x0, store_addr++);
+
+ /*
+ * Set the internal register base address to the value
+ * expected by Linux, as read from the Device Tree.
+ */
+ writel(MBUS_INTERNAL_REG_ADDRESS, store_addr++);
+ writel(mvebu_internal_reg_base(), store_addr++);
+
+ /*
+ * Ask the mvebu-mbus driver to store the SDRAM window
+ * configuration, which has to be restored by the bootloader
+ * before re-entering the kernel on resume.
+ */
+ store_addr += mvebu_mbus_save_cpu_target(store_addr);
+
+ writel(BOOT_MAGIC_LIST_END, store_addr);
+}
+
+static int mvebu_pm_enter(suspend_state_t state)
+{
+ if (state != PM_SUSPEND_MEM)
+ return -EINVAL;
+
+ cpu_pm_enter();
+
+ mvebu_pm_store_bootinfo();
+ cpu_suspend(0, mvebu_pm_powerdown);
+
+ outer_resume();
+
+ mvebu_v7_pmsu_idle_exit();
+
+ set_cpu_coherent();
+
+ cpu_pm_exit();
+
+ return 0;
+}
+
+static const struct platform_suspend_ops mvebu_pm_ops = {
+ .enter = mvebu_pm_enter,
+ .valid = suspend_valid_only_mem,
+};
+
+int mvebu_pm_init(void (*board_pm_enter)(void __iomem *sdram_reg, u32 srcmd))
+{
+ struct device_node *np;
+ struct resource res;
+
+ if (!of_machine_is_compatible("marvell,armadaxp"))
+ return -ENODEV;
+
+ np = of_find_compatible_node(NULL, NULL,
+ "marvell,armada-xp-sdram-controller");
+ if (!np)
+ return -ENODEV;
+
+ if (of_address_to_resource(np, 0, &res)) {
+ of_node_put(np);
+ return -ENODEV;
+ }
+
+ if (!request_mem_region(res.start, resource_size(&res),
+ np->full_name)) {
+ of_node_put(np);
+ return -EBUSY;
+ }
+
+ sdram_ctrl = ioremap(res.start, resource_size(&res));
+ if (!sdram_ctrl) {
+ release_mem_region(res.start, resource_size(&res));
+ of_node_put(np);
+ return -ENOMEM;
+ }
+
+ of_node_put(np);
+
+ mvebu_board_pm_enter = board_pm_enter;
+
+ suspend_set_ops(&mvebu_pm_ops);
+
+ return 0;
+}
#include <linux/clk.h>
#include <linux/cpu_pm.h>
+#include <linux/cpufreq-dt.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <asm/suspend.h>
#include <asm/tlbflush.h>
#include "common.h"
-#include "armada-370-xp.h"
#define PMSU_BASE_OFFSET 0x100
return cpu_suspend(deepidle, armada_370_xp_pmsu_idle_enter);
}
-static int armada_38x_do_cpu_suspend(unsigned long deepidle)
+int armada_38x_do_cpu_suspend(unsigned long deepidle)
{
unsigned long flags = 0;
return 0;
}
+struct cpufreq_dt_platform_data cpufreq_dt_pd = {
+ .independent_clocks = true,
+};
+
static int __init armada_xp_pmsu_cpufreq_init(void)
{
struct device_node *np;
}
}
- platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+ platform_device_register_data(NULL, "cpufreq-dt", -1,
+ &cpufreq_dt_pd, sizeof(cpufreq_dt_pd));
return 0;
}
phys_addr_t resume_addr_reg);
void mvebu_v7_pmsu_idle_exit(void);
+void armada_370_xp_cpu_resume(void);
+int armada_370_xp_pmsu_idle_enter(unsigned long deepidle);
+int armada_38x_do_cpu_suspend(unsigned long deepidle);
#endif /* __MACH_370_XP_PMSU_H */
#include <linux/linkage.h>
#include <asm/assembler.h>
+
+ENTRY(armada_38x_scu_power_up)
+ mrc p15, 4, r1, c15, c0 @ get SCU base address
+ orr r1, r1, #0x8 @ SCU CPU Power Status Register
+ mrc 15, 0, r0, cr0, cr0, 5 @ get the CPU ID
+ and r0, r0, #15
+ add r1, r1, r0
+ mov r0, #0x0
+ strb r0, [r1] @ switch SCU power state to Normal mode
+ ret lr
+ENDPROC(armada_38x_scu_power_up)
+
/*
* This is the entry point through which CPUs exiting cpuidle deep
* idle state are going.
*/
ENTRY(armada_370_xp_cpu_resume)
ARM_BE8(setend be ) @ go BE8 if entered LE
+ /*
+ * Disable the MMU that might have been enabled in BootROM if
+ * this code is used in the resume path of a suspend/resume
+ * cycle.
+ */
+ mrc p15, 0, r1, c1, c0, 0
+ bic r1, #1
+ mcr p15, 0, r1, c1, c0, 0
bl ll_add_cpu_to_smp_group
bl ll_enable_coherency
b cpu_resume
/* do we need it for Armada 38x*/
ARM_BE8(setend be ) @ go BE8 if entered LE
bl v7_invalidate_l1
- mrc p15, 4, r1, c15, c0 @ get SCU base address
- orr r1, r1, #0x8 @ SCU CPU Power Status Register
- mrc 15, 0, r0, cr0, cr0, 5 @ get the CPU ID
- and r0, r0, #15
- add r1, r1, r0
- mov r0, #0x0
- strb r0, [r1] @ switch SCU power state to Normal mode
+ bl armada_38x_scu_power_up
b cpu_resume
ENDPROC(armada_38x_cpu_resume)
device_initcall(cpu8815_mmcsd_init);
static const char * cpu8815_board_compat[] = {
+ "st,nomadik-nhk-15",
"calaosystems,usb-s8815",
NULL,
};
select CLKSRC_MMIO
select GENERIC_IRQ_CHIP
select MACH_OMAP_GENERIC
+ select MEMORY
select OMAP_DM_TIMER
+ select OMAP_GPMC
select PINCTRL
select SOC_BUS
select TI_PRIV_EDMA
default y
select OMAP_PACKAGE_CBB
-config MACH_OMAP_3430SDP
- bool "OMAP 3430 SDP board"
- depends on ARCH_OMAP3
- default y
- select OMAP_PACKAGE_CBB
-
config MACH_NOKIA_N810
bool
default y
select OMAP_PACKAGE_CUS
-config MACH_TI8168EVM
- bool "TI8168 Evaluation Module"
- depends on SOC_TI81XX
- default y
-
-config MACH_TI8148EVM
- bool "TI8148 Evaluation Module"
- depends on SOC_TI81XX
- default y
-
config OMAP3_EMU
bool "OMAP3 debugging peripherals"
depends on ARCH_OMAP3
-I$(srctree)/arch/arm/plat-omap/include
# Common support
-obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o gpmc.o timer.o pm.o \
+obj-y := id.o io.o control.o mux.o devices.o fb.o serial.o timer.o pm.o \
common.o gpio.o dma.o wd_timer.o display.o i2c.o hdq1w.o omap_hwmod.o \
omap_device.o sram.o drm.o
obj-$(CONFIG_ARCH_OMAP2) += prm2xxx_3xxx.o prm2xxx.o cm2xxx.o
obj-$(CONFIG_ARCH_OMAP3) += prm2xxx_3xxx.o prm3xxx.o cm3xxx.o
obj-$(CONFIG_ARCH_OMAP3) += vc3xxx_data.o vp3xxx_data.o
-omap-prcm-4-5-common = cminst44xx.o cm44xx.o prm44xx.o \
+omap-prcm-4-5-common = cminst44xx.o prm44xx.o \
prcm_mpu44xx.o prminst44xx.o \
vc44xx_data.o vp44xx_data.o
obj-$(CONFIG_ARCH_OMAP4) += $(omap-prcm-4-5-common)
obj-$(CONFIG_MACH_OMAP3_TORPEDO) += board-omap3logic.o
obj-$(CONFIG_MACH_OVERO) += board-overo.o
obj-$(CONFIG_MACH_OMAP3_PANDORA) += board-omap3pandora.o
-obj-$(CONFIG_MACH_OMAP_3430SDP) += board-3430sdp.o
obj-$(CONFIG_MACH_NOKIA_N8X0) += board-n8x0.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51.o sdram-nokia.o
obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-peripherals.o
obj-$(CONFIG_MACH_CRANEBOARD) += board-am3517crane.o
obj-$(CONFIG_MACH_SBC3530) += board-omap3stalker.o
-obj-$(CONFIG_MACH_TI8168EVM) += board-ti8168evm.o
-obj-$(CONFIG_MACH_TI8148EVM) += board-ti8168evm.o
# Platform specific device init code
nand-$(CONFIG_MTD_NAND_OMAP2) := gpmc-nand.o
obj-y += $(nand-m) $(nand-y)
-smc91x-$(CONFIG_SMC91X) := gpmc-smc91x.o
-obj-y += $(smc91x-m) $(smc91x-y)
-
smsc911x-$(CONFIG_SMSC911X) := gpmc-smsc911x.o
obj-y += $(smsc911x-m) $(smsc911x-y)
ifneq ($(CONFIG_HWSPINLOCK_OMAP),)
#include <linux/reboot.h>
#include "common.h"
-#include "prm-regbits-33xx.h"
-#include "prm33xx.h"
+#include "prm.h"
/**
* am3xx_restart - trigger a software restart of the SoC
{
/* TODO: Handle mode and cmd if necessary */
- am33xx_prm_rmw_reg_bits(AM33XX_RST_GLOBAL_WARM_SW_MASK,
- AM33XX_RST_GLOBAL_WARM_SW_MASK,
- AM33XX_PRM_DEVICE_MOD,
- AM33XX_PRM_RSTCTRL_OFFSET);
-
- /* OCP barrier */
- (void)am33xx_prm_read_reg(AM33XX_PRM_DEVICE_MOD,
- AM33XX_PRM_RSTCTRL_OFFSET);
+ omap_prm_reset_system();
}
+++ /dev/null
-/*
- * linux/arch/arm/mach-omap2/board-3430sdp.c
- *
- * Copyright (C) 2007 Texas Instruments
- *
- * Modified from mach-omap2/board-generic.c
- *
- * Initial code: Syed Mohammed Khasim
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/input.h>
-#include <linux/input/matrix_keypad.h>
-#include <linux/spi/spi.h>
-#include <linux/i2c/twl.h>
-#include <linux/regulator/machine.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/mmc/host.h>
-#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/omap-twl4030.h>
-#include <linux/usb/phy.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include <linux/omap-dma.h>
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "gpmc.h"
-#include "gpmc-smc91x.h"
-
-#include "soc.h"
-#include "board-flash.h"
-#include "mux.h"
-#include "sdram-qimonda-hyb18m512160af-6.h"
-#include "hsmmc.h"
-#include "pm.h"
-#include "control.h"
-#include "common-board-devices.h"
-
-#define CONFIG_DISABLE_HFCLK 1
-
-#define SDP3430_TS_GPIO_IRQ_SDPV1 3
-#define SDP3430_TS_GPIO_IRQ_SDPV2 2
-
-#define ENABLE_VAUX3_DEDICATED 0x03
-#define ENABLE_VAUX3_DEV_GRP 0x20
-
-#define TWL4030_MSECURE_GPIO 22
-
-static uint32_t board_keymap[] = {
- KEY(0, 0, KEY_LEFT),
- KEY(0, 1, KEY_RIGHT),
- KEY(0, 2, KEY_A),
- KEY(0, 3, KEY_B),
- KEY(0, 4, KEY_C),
- KEY(1, 0, KEY_DOWN),
- KEY(1, 1, KEY_UP),
- KEY(1, 2, KEY_E),
- KEY(1, 3, KEY_F),
- KEY(1, 4, KEY_G),
- KEY(2, 0, KEY_ENTER),
- KEY(2, 1, KEY_I),
- KEY(2, 2, KEY_J),
- KEY(2, 3, KEY_K),
- KEY(2, 4, KEY_3),
- KEY(3, 0, KEY_M),
- KEY(3, 1, KEY_N),
- KEY(3, 2, KEY_O),
- KEY(3, 3, KEY_P),
- KEY(3, 4, KEY_Q),
- KEY(4, 0, KEY_R),
- KEY(4, 1, KEY_4),
- KEY(4, 2, KEY_T),
- KEY(4, 3, KEY_U),
- KEY(4, 4, KEY_D),
- KEY(5, 0, KEY_V),
- KEY(5, 1, KEY_W),
- KEY(5, 2, KEY_L),
- KEY(5, 3, KEY_S),
- KEY(5, 4, KEY_H),
- 0
-};
-
-static struct matrix_keymap_data board_map_data = {
- .keymap = board_keymap,
- .keymap_size = ARRAY_SIZE(board_keymap),
-};
-
-static struct twl4030_keypad_data sdp3430_kp_data = {
- .keymap_data = &board_map_data,
- .rows = 5,
- .cols = 6,
- .rep = 1,
-};
-
-#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8
-#define SDP3430_LCD_PANEL_ENABLE_GPIO 5
-
-static void __init sdp3430_display_init(void)
-{
- int r;
-
- /*
- * the backlight GPIO doesn't directly go to the panel, it enables
- * an internal circuit on 3430sdp to create the signal V_BKL_28V,
- * this is connected to LED+ pin of the sharp panel. This GPIO
- * is left enabled in the board file, and not passed to the panel
- * as platform_data.
- */
- r = gpio_request_one(SDP3430_LCD_PANEL_BACKLIGHT_GPIO,
- GPIOF_OUT_INIT_HIGH, "LCD Backlight");
- if (r)
- pr_err("failed to get LCD Backlight GPIO\n");
-
-}
-
-static struct panel_sharp_ls037v7dw01_platform_data sdp3430_lcd_pdata = {
- .name = "lcd",
- .source = "dpi.0",
-
- .data_lines = 16,
-
- .resb_gpio = SDP3430_LCD_PANEL_ENABLE_GPIO,
- .ini_gpio = -1,
- .mo_gpio = -1,
- .lr_gpio = -1,
- .ud_gpio = -1,
-};
-
-static struct platform_device sdp3430_lcd_device = {
- .name = "panel-sharp-ls037v7dw01",
- .id = 0,
- .dev.platform_data = &sdp3430_lcd_pdata,
-};
-
-static struct connector_dvi_platform_data sdp3430_dvi_connector_pdata = {
- .name = "dvi",
- .source = "tfp410.0",
- .i2c_bus_num = -1,
-};
-
-static struct platform_device sdp3430_dvi_connector_device = {
- .name = "connector-dvi",
- .id = 0,
- .dev.platform_data = &sdp3430_dvi_connector_pdata,
-};
-
-static struct encoder_tfp410_platform_data sdp3430_tfp410_pdata = {
- .name = "tfp410.0",
- .source = "dpi.0",
- .data_lines = 24,
- .power_down_gpio = -1,
-};
-
-static struct platform_device sdp3430_tfp410_device = {
- .name = "tfp410",
- .id = 0,
- .dev.platform_data = &sdp3430_tfp410_pdata,
-};
-
-static struct connector_atv_platform_data sdp3430_tv_pdata = {
- .name = "tv",
- .source = "venc.0",
- .connector_type = OMAP_DSS_VENC_TYPE_SVIDEO,
- .invert_polarity = false,
-};
-
-static struct platform_device sdp3430_tv_connector_device = {
- .name = "connector-analog-tv",
- .id = 0,
- .dev.platform_data = &sdp3430_tv_pdata,
-};
-
-static struct omap_dss_board_info sdp3430_dss_data = {
- .default_display_name = "lcd",
-};
-
-static struct omap2_hsmmc_info mmc[] = {
- {
- .mmc = 1,
- /* 8 bits (default) requires S6.3 == ON,
- * so the SIM card isn't used; else 4 bits.
- */
- .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
- .gpio_wp = 4,
- .deferred = true,
- },
- {
- .mmc = 2,
- .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA,
- .gpio_wp = 7,
- .deferred = true,
- },
- {} /* Terminator */
-};
-
-static struct omap_tw4030_pdata omap_twl4030_audio_data = {
- .voice_connected = true,
- .custom_routing = true,
-
- .has_hs = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
- .has_hf = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
-
- .has_mainmic = true,
- .has_submic = true,
- .has_hsmic = true,
- .has_linein = OMAP_TWL4030_LEFT | OMAP_TWL4030_RIGHT,
-};
-
-static int sdp3430_twl_gpio_setup(struct device *dev,
- unsigned gpio, unsigned ngpio)
-{
- /* gpio + 0 is "mmc0_cd" (input/IRQ),
- * gpio + 1 is "mmc1_cd" (input/IRQ)
- */
- mmc[0].gpio_cd = gpio + 0;
- mmc[1].gpio_cd = gpio + 1;
- omap_hsmmc_late_init(mmc);
-
- /* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */
- gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "sub_lcd_en_bkl");
-
- /* gpio + 15 is "sub_lcd_nRST" (output) */
- gpio_request_one(gpio + 15, GPIOF_OUT_INIT_LOW, "sub_lcd_nRST");
-
- omap_twl4030_audio_data.jack_detect = gpio + 2;
- omap_twl4030_audio_init("SDP3430", &omap_twl4030_audio_data);
-
- return 0;
-}
-
-static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
- .pulldowns = BIT(2) | BIT(6) | BIT(8) | BIT(13)
- | BIT(16) | BIT(17),
- .setup = sdp3430_twl_gpio_setup,
-};
-
-/* regulator consumer mappings */
-
-/* ads7846 on SPI */
-static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = {
- REGULATOR_SUPPLY("vcc", "spi1.0"),
-};
-
-static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = {
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply sdp3430_vsim_supplies[] = {
- REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"),
-};
-
-static struct regulator_consumer_supply sdp3430_vmmc2_supplies[] = {
- REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"),
-};
-
-/*
- * Apply all the fixed voltages since most versions of U-Boot
- * don't bother with that initialization.
- */
-
-/* VAUX1 for mainboard (irda and sub-lcd) */
-static struct regulator_init_data sdp3430_vaux1 = {
- .constraints = {
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-/* VAUX2 for camera module */
-static struct regulator_init_data sdp3430_vaux2 = {
- .constraints = {
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-/* VAUX3 for LCD board */
-static struct regulator_init_data sdp3430_vaux3 = {
- .constraints = {
- .min_uV = 2800000,
- .max_uV = 2800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(sdp3430_vaux3_supplies),
- .consumer_supplies = sdp3430_vaux3_supplies,
-};
-
-/* VAUX4 for OMAP VDD_CSI2 (camera) */
-static struct regulator_init_data sdp3430_vaux4 = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 1800000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
-};
-
-/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
-static struct regulator_init_data sdp3430_vmmc1 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 3150000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(sdp3430_vmmc1_supplies),
- .consumer_supplies = sdp3430_vmmc1_supplies,
-};
-
-/* VMMC2 for MMC2 card */
-static struct regulator_init_data sdp3430_vmmc2 = {
- .constraints = {
- .min_uV = 1850000,
- .max_uV = 1850000,
- .apply_uV = true,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(sdp3430_vmmc2_supplies),
- .consumer_supplies = sdp3430_vmmc2_supplies,
-};
-
-/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */
-static struct regulator_init_data sdp3430_vsim = {
- .constraints = {
- .min_uV = 1800000,
- .max_uV = 3000000,
- .valid_modes_mask = REGULATOR_MODE_NORMAL
- | REGULATOR_MODE_STANDBY,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE
- | REGULATOR_CHANGE_MODE
- | REGULATOR_CHANGE_STATUS,
- },
- .num_consumer_supplies = ARRAY_SIZE(sdp3430_vsim_supplies),
- .consumer_supplies = sdp3430_vsim_supplies,
-};
-
-static struct twl4030_platform_data sdp3430_twldata = {
- /* platform_data for children goes here */
- .gpio = &sdp3430_gpio_data,
- .keypad = &sdp3430_kp_data,
-
- .vaux1 = &sdp3430_vaux1,
- .vaux2 = &sdp3430_vaux2,
- .vaux3 = &sdp3430_vaux3,
- .vaux4 = &sdp3430_vaux4,
- .vmmc1 = &sdp3430_vmmc1,
- .vmmc2 = &sdp3430_vmmc2,
- .vsim = &sdp3430_vsim,
-};
-
-static int __init omap3430_i2c_init(void)
-{
- /* i2c1 for PMIC only */
- omap3_pmic_get_config(&sdp3430_twldata,
- TWL_COMMON_PDATA_USB | TWL_COMMON_PDATA_BCI |
- TWL_COMMON_PDATA_MADC | TWL_COMMON_PDATA_AUDIO,
- TWL_COMMON_REGULATOR_VDAC | TWL_COMMON_REGULATOR_VPLL2);
- sdp3430_twldata.vdac->constraints.apply_uV = true;
- sdp3430_twldata.vpll2->constraints.apply_uV = true;
- sdp3430_twldata.vpll2->constraints.name = "VDVI";
-
- sdp3430_twldata.audio->codec->hs_extmute = 1;
- sdp3430_twldata.audio->codec->hs_extmute_gpio = -EINVAL;
-
- omap3_pmic_init("twl4030", &sdp3430_twldata);
-
- /* i2c2 on camera connector (for sensor control) and optional isp1301 */
- omap_register_i2c_bus(2, 400, NULL, 0);
- /* i2c3 on display connector (for DVI, tfp410) */
- omap_register_i2c_bus(3, 400, NULL, 0);
- return 0;
-}
-
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-
-static struct omap_smc91x_platform_data board_smc91x_data = {
- .cs = 3,
- .flags = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
- IORESOURCE_IRQ_LOWLEVEL,
-};
-
-static void __init board_smc91x_init(void)
-{
- if (omap_rev() > OMAP3430_REV_ES1_0)
- board_smc91x_data.gpio_irq = 6;
- else
- board_smc91x_data.gpio_irq = 29;
-
- gpmc_smc91x_init(&board_smc91x_data);
-}
-
-#else
-
-static inline void board_smc91x_init(void)
-{
-}
-
-#endif
-
-static void enable_board_wakeup_source(void)
-{
- /* T2 interrupt line (keypad) */
- omap_mux_init_signal("sys_nirq",
- OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP);
-}
-
-static struct usbhs_phy_data phy_data[] __initdata = {
- {
- .port = 1,
- .reset_gpio = 57,
- .vcc_gpio = -EINVAL,
- },
- {
- .port = 2,
- .reset_gpio = 61,
- .vcc_gpio = -EINVAL,
- },
-};
-
-static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
-
- .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
- .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
- { .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#else
-#define board_mux NULL
-#endif
-
-/*
- * SDP3430 V2 Board CS organization
- * Different from SDP3430 V1. Now 4 switches used to specify CS
- *
- * See also the Switch S8 settings in the comments.
- */
-static char chip_sel_3430[][GPMC_CS_NUM] = {
- {PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */
- {PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */
- {PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */
-};
-
-static struct mtd_partition sdp_nor_partitions[] = {
- /* bootloader (U-Boot, etc) in first sector */
- {
- .name = "Bootloader-NOR",
- .offset = 0,
- .size = SZ_256K,
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- /* bootloader params in the next sector */
- {
- .name = "Params-NOR",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_256K,
- .mask_flags = 0,
- },
- /* kernel */
- {
- .name = "Kernel-NOR",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_2M,
- .mask_flags = 0
- },
- /* file system */
- {
- .name = "Filesystem-NOR",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- .mask_flags = 0
- }
-};
-
-static struct mtd_partition sdp_onenand_partitions[] = {
- {
- .name = "X-Loader-OneNAND",
- .offset = 0,
- .size = 4 * (64 * 2048),
- .mask_flags = MTD_WRITEABLE /* force read-only */
- },
- {
- .name = "U-Boot-OneNAND",
- .offset = MTDPART_OFS_APPEND,
- .size = 2 * (64 * 2048),
- .mask_flags = MTD_WRITEABLE /* force read-only */
- },
- {
- .name = "U-Boot Environment-OneNAND",
- .offset = MTDPART_OFS_APPEND,
- .size = 1 * (64 * 2048),
- },
- {
- .name = "Kernel-OneNAND",
- .offset = MTDPART_OFS_APPEND,
- .size = 16 * (64 * 2048),
- },
- {
- .name = "File System-OneNAND",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static struct mtd_partition sdp_nand_partitions[] = {
- /* All the partition sizes are listed in terms of NAND block size */
- {
- .name = "X-Loader-NAND",
- .offset = 0,
- .size = 4 * (64 * 2048),
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- {
- .name = "U-Boot-NAND",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
- .size = 10 * (64 * 2048),
- .mask_flags = MTD_WRITEABLE, /* force read-only */
- },
- {
- .name = "Boot Env-NAND",
-
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */
- .size = 6 * (64 * 2048),
- },
- {
- .name = "Kernel-NAND",
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */
- .size = 40 * (64 * 2048),
- },
- {
- .name = "File System - NAND",
- .size = MTDPART_SIZ_FULL,
- .offset = MTDPART_OFS_APPEND, /* Offset = 0x780000 */
- },
-};
-
-static struct flash_partitions sdp_flash_partitions[] = {
- {
- .parts = sdp_nor_partitions,
- .nr_parts = ARRAY_SIZE(sdp_nor_partitions),
- },
- {
- .parts = sdp_onenand_partitions,
- .nr_parts = ARRAY_SIZE(sdp_onenand_partitions),
- },
- {
- .parts = sdp_nand_partitions,
- .nr_parts = ARRAY_SIZE(sdp_nand_partitions),
- },
-};
-
-static void __init omap_3430sdp_init(void)
-{
- int gpio_pendown;
-
- omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
- omap_hsmmc_init(mmc);
- omap3430_i2c_init();
- omap_display_init(&sdp3430_dss_data);
- platform_device_register(&sdp3430_lcd_device);
- platform_device_register(&sdp3430_tfp410_device);
- platform_device_register(&sdp3430_dvi_connector_device);
- platform_device_register(&sdp3430_tv_connector_device);
-
- if (omap_rev() > OMAP3430_REV_ES1_0)
- gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV2;
- else
- gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1;
- omap_ads7846_init(1, gpio_pendown, 310, NULL);
- omap_serial_init();
- omap_sdrc_init(hyb18m512160af6_sdrc_params, NULL);
- usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
- usb_musb_init(NULL);
- board_smc91x_init();
- board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);
- sdp3430_display_init();
- enable_board_wakeup_source();
-
- usbhs_init_phys(phy_data, ARRAY_SIZE(phy_data));
- usbhs_init(&usbhs_bdata);
-}
-
-MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board")
- /* Maintainer: Syed Khasim - Texas Instruments Inc */
- .atag_offset = 0x100,
- .reserve = omap_reserve,
- .map_io = omap3_map_io,
- .init_early = omap3430_init_early,
- .init_irq = omap3_init_irq,
- .init_machine = omap_3430sdp_init,
- .init_late = omap3430_init_late,
- .init_time = omap3_sync32k_timer_init,
- .restart = omap3xxx_restart,
-MACHINE_END
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
+#include <linux/omap-gpmc.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <linux/input/matrix_keypad.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/omap-gpmc.h>
#include <linux/platform_data/gpio-omap.h>
#include <linux/platform_data/at24.h>
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
#include "common-board-devices.h"
-#include "gpmc.h"
-#include "gpmc-nand.h"
#define CM_T35_GPIO_PENDOWN 57
#define SB_T35_USB_HUB_RESET_GPIO 167
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/leds.h>
+#include <linux/omap-gpmc.h>
#include <linux/rtc-v3020.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
#include "common.h"
#include <linux/platform_data/mtd-nand-omap2.h>
-#include "gpmc.h"
#include "am35xx.h"
#include "hsmmc.h"
#include "common-board-devices.h"
#include "am35xx-emac.h"
-#include "gpmc-nand.h"
#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE)
static struct gpio_led cm_t3517_leds[] = {
*/
#include <linux/kernel.h>
+#include <linux/omap-gpmc.h>
#include <linux/platform_device.h>
#include <linux/mtd/physmap.h>
#include <linux/io.h>
#include "soc.h"
#include "common.h"
#include "board-flash.h"
-#include "gpmc-onenand.h"
-#include "gpmc-nand.h"
#define REG_FPGA_REV 0x10
#define REG_FPGA_DIP_SWITCH_INPUT2 0x60
*/
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
-#include "gpmc.h"
#define PDC_NOR 1
#define PDC_NAND 2
#include <linux/i2c.h>
#include <linux/spi/spi.h>
#include <linux/usb/musb.h>
+#include <linux/mmc/host.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
-#include <linux/platform_data/mtd-onenand-omap2.h>
+#include <linux/platform_data/mmc-omap.h>
#include <linux/mfd/menelaus.h>
#include <sound/tlv320aic3x.h>
#include "common.h"
#include "mmc.h"
#include "soc.h"
-#include "gpmc-onenand.h"
#include "common-board-devices.h"
#define TUSB6010_ASYNC_CS 1
#include <linux/spi/spi.h>
#include <linux/regulator/machine.h>
#include <linux/i2c/twl.h>
+#include <linux/omap-gpmc.h>
#include <linux/wl12xx.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/nand.h>
#include "sdram-micron-mt46h32m32lf-6.h"
#include "hsmmc.h"
#include "common-board-devices.h"
-#include "gpmc-nand.h"
#define PANDORA_WIFI_IRQ_GPIO 21
#define PANDORA_WIFI_NRESET_GPIO 23
#include <linux/regulator/machine.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
+#include <linux/omap-gpmc.h>
#include <linux/mmc/host.h>
#include <linux/power/isp1704_charger.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include "common.h"
#include <linux/omap-dma.h>
-#include "gpmc-smc91x.h"
#include "board-rx51.h"
#include "omap-pm.h"
#include "hsmmc.h"
#include "common-board-devices.h"
-#include "gpmc.h"
-#include "gpmc-onenand.h"
#include "soc.h"
#include "omap-secure.h"
* Current flows to eMMC when eMMC is off and the data lines are pulled up,
* so pull them down. N.B. we pull 8 lines because we are using 8 lines.
*/
-static void rx51_mmc2_remux(struct device *dev, int slot, int power_on)
+static void rx51_mmc2_remux(struct device *dev, int power_on)
{
if (power_on)
omap_mux_write_array(partition, rx51_mmc2_on_mux);
.cover_only = true,
.gpio_cd = 160,
.gpio_wp = -EINVAL,
- .power_saving = true,
},
{
.name = "internal",
.gpio_cd = -EINVAL,
.gpio_wp = -EINVAL,
.nonremovable = true,
- .power_saving = true,
.remux = rx51_mmc2_remux,
},
{} /* Terminator */
};
#endif
-#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
-
-static struct omap_smc91x_platform_data board_smc91x_data = {
- .cs = 1,
- .gpio_irq = 54,
- .gpio_pwrdwn = 86,
- .gpio_reset = 164,
- .flags = GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL,
-};
-
-static void __init board_smc91x_init(void)
-{
- omap_mux_init_gpio(54, OMAP_PIN_INPUT_PULLDOWN);
- omap_mux_init_gpio(86, OMAP_PIN_OUTPUT);
- omap_mux_init_gpio(164, OMAP_PIN_OUTPUT);
-
- gpmc_smc91x_init(&board_smc91x_data);
-}
-
-#else
-
-static inline void board_smc91x_init(void)
-{
-}
-
-#endif
-
static struct gpio rx51_wl1251_gpios[] __initdata = {
{ RX51_WL1251_IRQ_GPIO, GPIOF_IN, "wl1251 irq" },
};
rx51_i2c_init();
regulator_has_full_constraints();
gpmc_onenand_init(board_onenand_data);
- board_smc91x_init();
rx51_add_gpio_keys();
rx51_init_wl1251();
rx51_init_tsc2005();
+++ /dev/null
-/*
- * Code for TI8168/TI8148 EVM.
- *
- * Copyright (C) 2010 Texas Instruments, Inc. - http://www.ti.com/
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation version 2.
- *
- * This program is distributed "as is" WITHOUT ANY WARRANTY of any
- * kind, whether express or implied; without even the implied warranty
- * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/usb/musb.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-
-static struct omap_musb_board_data musb_board_data = {
- .set_phy_power = ti81xx_musb_phy_power,
- .interface_type = MUSB_INTERFACE_ULPI,
- .mode = MUSB_OTG,
- .power = 500,
-};
-
-static void __init ti81xx_evm_init(void)
-{
- omap_serial_init();
- omap_sdrc_init(NULL, NULL);
- usb_musb_init(&musb_board_data);
-}
-
-MACHINE_START(TI8168EVM, "ti8168evm")
- /* Maintainer: Texas Instruments */
- .atag_offset = 0x100,
- .map_io = ti81xx_map_io,
- .init_early = ti81xx_init_early,
- .init_irq = ti81xx_init_irq,
- .init_time = omap3_sync32k_timer_init,
- .init_machine = ti81xx_evm_init,
- .init_late = ti81xx_init_late,
- .restart = omap44xx_restart,
-MACHINE_END
-
-MACHINE_START(TI8148EVM, "ti8148evm")
- /* Maintainer: Texas Instruments */
- .atag_offset = 0x100,
- .map_io = ti81xx_map_io,
- .init_early = ti81xx_init_early,
- .init_irq = ti81xx_init_irq,
- .init_time = omap3_sync32k_timer_init,
- .init_machine = ti81xx_evm_init,
- .init_late = ti81xx_init_late,
- .restart = omap44xx_restart,
-MACHINE_END
.get_parent = &omap2_init_dpll_parent,
.recalc_rate = &omap3_dpll_recalc,
.set_rate = &omap3_noncore_dpll_set_rate,
+ .set_parent = &omap3_noncore_dpll_set_parent,
+ .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent,
+ .determine_rate = &omap3_noncore_dpll_determine_rate,
.round_rate = &omap2_dpll_round_rate,
};
.get_parent = &omap2_init_dpll_parent,
.recalc_rate = &omap3_dpll_recalc,
.set_rate = &omap3_dpll4_set_rate,
+ .set_parent = &omap3_noncore_dpll_set_parent,
+ .set_rate_and_parent = &omap3_dpll4_set_rate_and_parent,
+ .determine_rate = &omap3_noncore_dpll_determine_rate,
.round_rate = &omap2_dpll_round_rate,
};
_wait_idlest_generic(clk, idlest_reg, (1 << idlest_bit),
idlest_val, __clk_get_name(clk->hw.clk));
} else {
- cm_wait_module_ready(prcm_mod, idlest_reg_id, idlest_bit);
+ omap_cm_wait_module_ready(0, prcm_mod, idlest_reg_id,
+ idlest_bit);
};
}
ti_clk_features.cm_idlest_val = OMAP24XX_CM_IDLEST_VAL;
else if (cpu_is_omap34xx())
ti_clk_features.cm_idlest_val = OMAP34XX_CM_IDLEST_VAL;
+
+ /* On OMAP3430 ES1.0, DPLL4 can't be re-programmed */
+ if (omap_rev() == OMAP3430_REV_ES1_0)
+ ti_clk_features.flags |= TI_CLK_DPLL4_DENY_REPROGRAM;
}
};
#define TI_CLK_DPLL_HAS_FREQSEL (1 << 0)
+#define TI_CLK_DPLL4_DENY_REPROGRAM (1 << 1)
extern struct ti_clk_features ti_clk_features;
/* needed by omap3_core_dpll_m2_set_rate() */
struct clk *sdrc_ick_p, *arm_fck_p;
+
+/**
+ * omap3_dpll4_set_rate - set rate for omap3 per-dpll
+ * @hw: clock to change
+ * @rate: target rate for clock
+ * @parent_rate: rate of the parent clock
+ *
+ * Check if the current SoC supports the per-dpll reprogram operation
+ * or not, and then do the rate change if supported. Returns -EINVAL
+ * if not supported, 0 for success, and potential error codes from the
+ * clock rate change.
+ */
int omap3_dpll4_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate)
{
* on 3430ES1 prevents us from changing DPLL multipliers or dividers
* on DPLL4.
*/
- if (omap_rev() == OMAP3430_REV_ES1_0) {
+ if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
return -EINVAL;
}
return omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
}
+/**
+ * omap3_dpll4_set_rate_and_parent - set rate and parent for omap3 per-dpll
+ * @hw: clock to change
+ * @rate: target rate for clock
+ * @parent_rate: rate of the parent clock
+ * @index: parent index, 0 - reference clock, 1 - bypass clock
+ *
+ * Check if the current SoC support the per-dpll reprogram operation
+ * or not, and then do the rate + parent change if supported. Returns
+ * -EINVAL if not supported, 0 for success, and potential error codes
+ * from the clock rate change.
+ */
+int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate, u8 index)
+{
+ if (ti_clk_features.flags & TI_CLK_DPLL4_DENY_REPROGRAM) {
+ pr_err("clock: DPLL4 cannot change rate due to silicon 'Limitation 2.5' on 3430ES1.\n");
+ return -EINVAL;
+ }
+
+ return omap3_noncore_dpll_set_rate_and_parent(hw, rate, parent_rate,
+ index);
+}
+
void __init omap3_clk_lock_dpll5(void)
{
struct clk *dpll5_clk;
* struct cm_ll_data - fn ptrs to per-SoC CM function implementations
* @split_idlest_reg: ptr to the SoC CM-specific split_idlest_reg impl
* @wait_module_ready: ptr to the SoC CM-specific wait_module_ready impl
+ * @wait_module_idle: ptr to the SoC CM-specific wait_module_idle impl
+ * @module_enable: ptr to the SoC CM-specific module_enable impl
+ * @module_disable: ptr to the SoC CM-specific module_disable impl
*/
struct cm_ll_data {
int (*split_idlest_reg)(void __iomem *idlest_reg, s16 *prcm_inst,
u8 *idlest_reg_id);
- int (*wait_module_ready)(s16 prcm_mod, u8 idlest_id, u8 idlest_shift);
+ int (*wait_module_ready)(u8 part, s16 prcm_mod, u16 idlest_reg,
+ u8 idlest_shift);
+ int (*wait_module_idle)(u8 part, s16 prcm_mod, u16 idlest_reg,
+ u8 idlest_shift);
+ void (*module_enable)(u8 mode, u8 part, u16 inst, u16 clkctrl_offs);
+ void (*module_disable)(u8 part, u16 inst, u16 clkctrl_offs);
};
extern int cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
u8 *idlest_reg_id);
-extern int cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift);
-
+int omap_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_reg,
+ u8 idlest_shift);
+int omap_cm_wait_module_idle(u8 part, s16 prcm_mod, u16 idlest_reg,
+ u8 idlest_shift);
+int omap_cm_module_enable(u8 mode, u8 part, u16 inst, u16 clkctrl_offs);
+int omap_cm_module_disable(u8 part, u16 inst, u16 clkctrl_offs);
extern int cm_register(struct cm_ll_data *cld);
extern int cm_unregister(struct cm_ll_data *cld);
#ifndef __ARCH_ARM_MACH_OMAP2_CM1_44XX_H
#define __ARCH_ARM_MACH_OMAP2_CM1_44XX_H
-#include "cm_44xx_54xx.h"
-
/* CM1 base address */
#define OMAP4430_CM1_BASE 0x4a004000
#ifndef __ARCH_ARM_MACH_OMAP2_CM1_54XX_H
#define __ARCH_ARM_MACH_OMAP2_CM1_54XX_H
-#include "cm_44xx_54xx.h"
-
/* CM1 base address */
#define OMAP54XX_CM_CORE_AON_BASE 0x4a004000
#ifndef __ARCH_ARM_MACH_OMAP2_CM1_7XX_H
#define __ARCH_ARM_MACH_OMAP2_CM1_7XX_H
-#include "cm_44xx_54xx.h"
-
/* CM1 base address */
#define DRA7XX_CM_CORE_AON_BASE 0x4a005000
#ifndef __ARCH_ARM_MACH_OMAP2_CM2_44XX_H
#define __ARCH_ARM_MACH_OMAP2_CM2_44XX_H
-#include "cm_44xx_54xx.h"
-
/* CM2 base address */
#define OMAP4430_CM2_BASE 0x4a008000
#ifndef __ARCH_ARM_MACH_OMAP2_CM2_54XX_H
#define __ARCH_ARM_MACH_OMAP2_CM2_54XX_H
-#include "cm_44xx_54xx.h"
-
/* CM2 base address */
#define OMAP54XX_CM_CORE_BASE 0x4a008000
#ifndef __ARCH_ARM_MACH_OMAP2_CM2_7XX_H
#define __ARCH_ARM_MACH_OMAP2_CM2_7XX_H
-#include "cm_44xx_54xx.h"
-
/* CM2 base address */
#define DRA7XX_CM_CORE_BASE 0x4a008000
omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL);
}
-bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
+static bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
{
u32 v;
return (v == OMAP24XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
}
-void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
+static void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
{
_write_clktrctrl(OMAP24XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
}
-void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
+static void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
{
_write_clktrctrl(OMAP24XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
}
v |= m;
omap2_cm_write_mod_reg(v, PLL_MOD, CM_CLKEN);
- omap2xxx_cm_wait_module_ready(PLL_MOD, 1, status_bit);
+ omap2xxx_cm_wait_module_ready(0, PLL_MOD, 1, status_bit);
/*
* REVISIT: Should we return an error code if
* XXX This function is only needed until absolute register addresses are
* removed from the OMAP struct clk records.
*/
-int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
- u8 *idlest_reg_id)
+static int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg,
+ s16 *prcm_inst,
+ u8 *idlest_reg_id)
{
unsigned long offs;
u8 idlest_offs;
/**
* omap2xxx_cm_wait_module_ready - wait for a module to leave idle or standby
+ * @part: PRCM partition, ignored for OMAP2
* @prcm_mod: PRCM module offset
* @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
* @idlest_shift: shift of the bit in the CM_IDLEST* register to check
* (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon
* success or -EBUSY if the module doesn't enable in time.
*/
-int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
+int omap2xxx_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_id,
+ u8 idlest_shift)
{
int ena = 0, i = 0;
u8 cm_idlest_reg;
#ifndef __ASSEMBLER__
-extern void omap2xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
-extern void omap2xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
-
extern void omap2xxx_cm_set_dpll_disable_autoidle(void);
extern void omap2xxx_cm_set_dpll_auto_low_power_stop(void);
extern void omap2xxx_cm_set_apll96_disable_autoidle(void);
extern void omap2xxx_cm_set_apll96_auto_low_power_stop(void);
-extern bool omap2xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask);
-extern int omap2xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
- u8 idlest_shift);
-extern int omap2xxx_cm_split_idlest_reg(void __iomem *idlest_reg,
- s16 *prcm_inst, u8 *idlest_reg_id);
+int omap2xxx_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_id,
+ u8 idlest_shift);
extern int omap2xxx_cm_fclks_active(void);
extern int omap2xxx_cm_mpu_retention_allowed(void);
extern u32 omap2xxx_cm_get_core_clk_src(void);
/**
* _clkctrl_idlest - read a CM_*_CLKCTRL register; mask & shift IDLEST bitfield
* @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
* @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
*
* Return the IDLEST bitfield of a CM_*_CLKCTRL register, shifted down to
* bit 0.
*/
-static u32 _clkctrl_idlest(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+static u32 _clkctrl_idlest(u16 inst, u16 clkctrl_offs)
{
u32 v = am33xx_cm_read_reg(inst, clkctrl_offs);
v &= AM33XX_IDLEST_MASK;
/**
* _is_module_ready - can module registers be accessed without causing an abort?
* @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
* @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
*
* Returns true if the module's CM_*_CLKCTRL.IDLEST bitfield is either
* *FUNCTIONAL or *INTERFACE_IDLE; false otherwise.
*/
-static bool _is_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+static bool _is_module_ready(u16 inst, u16 clkctrl_offs)
{
u32 v;
- v = _clkctrl_idlest(inst, cdoffs, clkctrl_offs);
+ v = _clkctrl_idlest(inst, clkctrl_offs);
return (v == CLKCTRL_IDLEST_FUNCTIONAL ||
v == CLKCTRL_IDLEST_INTERFACE_IDLE) ? true : false;
* Returns true if the clockdomain referred to by (@inst, @cdoffs)
* is in hardware-supervised idle mode, or 0 otherwise.
*/
-bool am33xx_cm_is_clkdm_in_hwsup(u16 inst, u16 cdoffs)
+static bool am33xx_cm_is_clkdm_in_hwsup(u16 inst, u16 cdoffs)
{
u32 v;
* Put a clockdomain referred to by (@inst, @cdoffs) into
* hardware-supervised idle mode. No return value.
*/
-void am33xx_cm_clkdm_enable_hwsup(u16 inst, u16 cdoffs)
+static void am33xx_cm_clkdm_enable_hwsup(u16 inst, u16 cdoffs)
{
_clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, inst, cdoffs);
}
* software-supervised idle mode, i.e., controlled manually by the
* Linux OMAP clockdomain code. No return value.
*/
-void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs)
+static void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs)
{
_clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, inst, cdoffs);
}
* Put a clockdomain referred to by (@inst, @cdoffs) into idle
* No return value.
*/
-void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs)
+static void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs)
{
_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, inst, cdoffs);
}
* Take a clockdomain referred to by (@inst, @cdoffs) out of idle,
* waking it up. No return value.
*/
-void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs)
+static void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs)
{
_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, inst, cdoffs);
}
/**
* am33xx_cm_wait_module_ready - wait for a module to be in 'func' state
+ * @part: PRCM partition, ignored for AM33xx
* @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
* @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ * @bit_shift: bit shift for the register, ignored for AM33xx
*
* Wait for the module IDLEST to be functional. If the idle state is in any
* the non functional state (trans, idle or disabled), module and thus the
* sysconfig cannot be accessed and will probably lead to an "imprecise
* external abort"
*/
-int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+static int am33xx_cm_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs,
+ u8 bit_shift)
{
int i = 0;
- omap_test_timeout(_is_module_ready(inst, cdoffs, clkctrl_offs),
+ omap_test_timeout(_is_module_ready(inst, clkctrl_offs),
MAX_MODULE_READY_TIME, i);
return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
/**
* am33xx_cm_wait_module_idle - wait for a module to be in 'disabled'
* state
+ * @part: CM partition, ignored for AM33xx
* @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
* @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ * @bit_shift: bit shift for the register, ignored for AM33xx
*
* Wait for the module IDLEST to be disabled. Some PRCM transition,
* like reset assertion or parent clock de-activation must wait the
* module to be fully disabled.
*/
-int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+static int am33xx_cm_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs,
+ u8 bit_shift)
{
int i = 0;
if (!clkctrl_offs)
return 0;
- omap_test_timeout((_clkctrl_idlest(inst, cdoffs, clkctrl_offs) ==
+ omap_test_timeout((_clkctrl_idlest(inst, clkctrl_offs) ==
CLKCTRL_IDLEST_DISABLED),
MAX_MODULE_READY_TIME, i);
/**
* am33xx_cm_module_enable - Enable the modulemode inside CLKCTRL
* @mode: Module mode (SW or HW)
+ * @part: CM partition, ignored for AM33xx
* @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
* @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
*
* No return value.
*/
-void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs, u16 clkctrl_offs)
+static void am33xx_cm_module_enable(u8 mode, u8 part, u16 inst,
+ u16 clkctrl_offs)
{
u32 v;
/**
* am33xx_cm_module_disable - Disable the module inside CLKCTRL
+ * @part: CM partition, ignored for AM33xx
* @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
* @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
*
* No return value.
*/
-void am33xx_cm_module_disable(u16 inst, s16 cdoffs, u16 clkctrl_offs)
+static void am33xx_cm_module_disable(u8 part, u16 inst, u16 clkctrl_offs)
{
u32 v;
.clkdm_clk_enable = am33xx_clkdm_clk_enable,
.clkdm_clk_disable = am33xx_clkdm_clk_disable,
};
+
+static struct cm_ll_data am33xx_cm_ll_data = {
+ .wait_module_ready = &am33xx_cm_wait_module_ready,
+ .wait_module_idle = &am33xx_cm_wait_module_idle,
+ .module_enable = &am33xx_cm_module_enable,
+ .module_disable = &am33xx_cm_module_disable,
+};
+
+int __init am33xx_cm_init(void)
+{
+ return cm_register(&am33xx_cm_ll_data);
+}
+
+static void __exit am33xx_cm_exit(void)
+{
+ cm_unregister(&am33xx_cm_ll_data);
+}
+__exitcall(am33xx_cm_exit);
#ifndef __ASSEMBLER__
-bool am33xx_cm_is_clkdm_in_hwsup(u16 inst, u16 cdoffs);
-void am33xx_cm_clkdm_enable_hwsup(u16 inst, u16 cdoffs);
-void am33xx_cm_clkdm_disable_hwsup(u16 inst, u16 cdoffs);
-void am33xx_cm_clkdm_force_sleep(u16 inst, u16 cdoffs);
-void am33xx_cm_clkdm_force_wakeup(u16 inst, u16 cdoffs);
-
-#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX)
-extern int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs,
- u16 clkctrl_offs);
-extern void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs,
- u16 clkctrl_offs);
-extern void am33xx_cm_module_disable(u16 inst, s16 cdoffs,
- u16 clkctrl_offs);
-extern int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs,
- u16 clkctrl_offs);
-#else
-static inline int am33xx_cm_wait_module_idle(u16 inst, s16 cdoffs,
- u16 clkctrl_offs)
-{
- return 0;
-}
-static inline void am33xx_cm_module_enable(u8 mode, u16 inst, s16 cdoffs,
- u16 clkctrl_offs)
-{
-}
-static inline void am33xx_cm_module_disable(u16 inst, s16 cdoffs,
- u16 clkctrl_offs)
-{
-}
-static inline int am33xx_cm_wait_module_ready(u16 inst, s16 cdoffs,
- u16 clkctrl_offs)
-{
- return 0;
-}
-#endif
-
+int am33xx_cm_init(void);
#endif /* ASSEMBLER */
#endif
omap2_cm_write_mod_reg(v, module, OMAP2_CM_CLKSTCTRL);
}
-bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
+static bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask)
{
u32 v;
return (v == OMAP34XX_CLKSTCTRL_ENABLE_AUTO) ? 1 : 0;
}
-void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
+static void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask)
{
_write_clktrctrl(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, module, mask);
}
-void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
+static void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask)
{
_write_clktrctrl(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, module, mask);
}
-void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask)
+static void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask)
{
_write_clktrctrl(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, module, mask);
}
-void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask)
+static void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask)
{
_write_clktrctrl(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, module, mask);
}
/**
* omap3xxx_cm_wait_module_ready - wait for a module to leave idle or standby
+ * @part: PRCM partition, ignored for OMAP3
* @prcm_mod: PRCM module offset
* @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
* @idlest_shift: shift of the bit in the CM_IDLEST* register to check
* (@prcm_mod, @idlest_id, @idlest_shift) is clocked. Return 0 upon
* success or -EBUSY if the module doesn't enable in time.
*/
-int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
+static int omap3xxx_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_id,
+ u8 idlest_shift)
{
int ena = 0, i = 0;
u8 cm_idlest_reg;
* XXX This function is only needed until absolute register addresses are
* removed from the OMAP struct clk records.
*/
-int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg, s16 *prcm_inst,
- u8 *idlest_reg_id)
+static int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg,
+ s16 *prcm_inst,
+ u8 *idlest_reg_id)
{
unsigned long offs;
u8 idlest_offs;
#ifndef __ASSEMBLER__
-extern void omap3xxx_cm_clkdm_enable_hwsup(s16 module, u32 mask);
-extern void omap3xxx_cm_clkdm_disable_hwsup(s16 module, u32 mask);
-extern void omap3xxx_cm_clkdm_force_sleep(s16 module, u32 mask);
-extern void omap3xxx_cm_clkdm_force_wakeup(s16 module, u32 mask);
-
-extern bool omap3xxx_cm_is_clkdm_in_hwsup(s16 module, u32 mask);
-extern int omap3xxx_cm_wait_module_ready(s16 prcm_mod, u8 idlest_id,
- u8 idlest_shift);
-
-extern int omap3xxx_cm_split_idlest_reg(void __iomem *idlest_reg,
- s16 *prcm_inst, u8 *idlest_reg_id);
-
extern void omap3_cm_save_context(void);
extern void omap3_cm_restore_context(void);
extern void omap3_cm_save_scratchpad_contents(u32 *ptr);
+++ /dev/null
-/*
- * OMAP4 CM1, CM2 module low-level functions
- *
- * Copyright (C) 2010 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * These functions are intended to be used only by the cminst44xx.c file.
- * XXX Perhaps we should just move them there and make them static.
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/err.h>
-#include <linux/io.h>
-
-#include "cm.h"
-#include "cm1_44xx.h"
-#include "cm2_44xx.h"
-
-/* CM1 hardware module low-level functions */
-
-/* Read a register in CM1 */
-u32 omap4_cm1_read_inst_reg(s16 inst, u16 reg)
-{
- return readl_relaxed(cm_base + inst + reg);
-}
-
-/* Write into a register in CM1 */
-void omap4_cm1_write_inst_reg(u32 val, s16 inst, u16 reg)
-{
- writel_relaxed(val, cm_base + inst + reg);
-}
-
-/* Read a register in CM2 */
-u32 omap4_cm2_read_inst_reg(s16 inst, u16 reg)
-{
- return readl_relaxed(cm2_base + inst + reg);
-}
-
-/* Write into a register in CM2 */
-void omap4_cm2_write_inst_reg(u32 val, s16 inst, u16 reg)
-{
- writel_relaxed(val, cm2_base + inst + reg);
-}
#define OMAP4_CM_CLKSTCTRL 0x0000
#define OMAP4_CM_STATICDEP 0x0004
+void omap_cm_base_init(void);
+int omap4_cm_init(void);
+
#endif
+++ /dev/null
-/*
- * OMAP44xx and OMAP54xx CM1/CM2 function prototypes
- *
- * Copyright (C) 2009-2013 Texas Instruments, Inc.
- * Copyright (C) 2009-2010 Nokia Corporation
- *
- * Paul Walmsley (paul@pwsan.com)
- * Rajendra Nayak (rnayak@ti.com)
- * Benoit Cousson (b-cousson@ti.com)
- *
- * This file is automatically generated from the OMAP hardware databases.
- * We respectfully ask that any modifications to this file be coordinated
- * with the public linux-omap@vger.kernel.org mailing list and the
- * authors above to ensure that the autogeneration scripts are kept
- * up-to-date with the file contents.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#ifndef __ARCH_ARM_MACH_OMAP2_CM_44XX_54XX_H
-#define __ARCH_ARM_MACH_OMAP2_CM_44XX_55XX_H
-
-/* CM1 Function prototypes */
-extern u32 omap4_cm1_read_inst_reg(s16 inst, u16 idx);
-extern void omap4_cm1_write_inst_reg(u32 val, s16 inst, u16 idx);
-extern u32 omap4_cm1_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
-
-/* CM2 Function prototypes */
-extern u32 omap4_cm2_read_inst_reg(s16 inst, u16 idx);
-extern void omap4_cm2_write_inst_reg(u32 val, s16 inst, u16 idx);
-extern u32 omap4_cm2_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
-
-#endif
}
/**
- * cm_wait_module_ready - wait for a module to leave idle or standby
+ * omap_cm_wait_module_ready - wait for a module to leave idle or standby
+ * @part: PRCM partition
* @prcm_mod: PRCM module offset
- * @idlest_id: CM_IDLESTx register ID (i.e., x = 1, 2, 3)
+ * @idlest_reg: CM_IDLESTx register
* @idlest_shift: shift of the bit in the CM_IDLEST* register to check
*
* Wait for the PRCM to indicate that the module identified by
* no per-SoC wait_module_ready() function pointer has been registered
* or if the idlest register is unknown on the SoC.
*/
-int cm_wait_module_ready(s16 prcm_mod, u8 idlest_id, u8 idlest_shift)
+int omap_cm_wait_module_ready(u8 part, s16 prcm_mod, u16 idlest_reg,
+ u8 idlest_shift)
{
if (!cm_ll_data->wait_module_ready) {
WARN_ONCE(1, "cm: %s: no low-level function defined\n",
return -EINVAL;
}
- return cm_ll_data->wait_module_ready(prcm_mod, idlest_id, idlest_shift);
+ return cm_ll_data->wait_module_ready(part, prcm_mod, idlest_reg,
+ idlest_shift);
+}
+
+/**
+ * omap_cm_wait_module_idle - wait for a module to enter idle or standby
+ * @part: PRCM partition
+ * @prcm_mod: PRCM module offset
+ * @idlest_reg: CM_IDLESTx register
+ * @idlest_shift: shift of the bit in the CM_IDLEST* register to check
+ *
+ * Wait for the PRCM to indicate that the module identified by
+ * (@prcm_mod, @idlest_id, @idlest_shift) is no longer clocked. Return
+ * 0 upon success, -EBUSY if the module doesn't enable in time, or
+ * -EINVAL if no per-SoC wait_module_idle() function pointer has been
+ * registered or if the idlest register is unknown on the SoC.
+ */
+int omap_cm_wait_module_idle(u8 part, s16 prcm_mod, u16 idlest_reg,
+ u8 idlest_shift)
+{
+ if (!cm_ll_data->wait_module_idle) {
+ WARN_ONCE(1, "cm: %s: no low-level function defined\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ return cm_ll_data->wait_module_idle(part, prcm_mod, idlest_reg,
+ idlest_shift);
+}
+
+/**
+ * omap_cm_module_enable - enable a module
+ * @mode: target mode for the module
+ * @part: PRCM partition
+ * @inst: PRCM instance
+ * @clkctrl_offs: CM_CLKCTRL register offset for the module
+ *
+ * Enables clocks for a module identified by (@part, @inst, @clkctrl_offs)
+ * making its IO space accessible. Return 0 upon success, -EINVAL if no
+ * per-SoC module_enable() function pointer has been registered.
+ */
+int omap_cm_module_enable(u8 mode, u8 part, u16 inst, u16 clkctrl_offs)
+{
+ if (!cm_ll_data->module_enable) {
+ WARN_ONCE(1, "cm: %s: no low-level function defined\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ cm_ll_data->module_enable(mode, part, inst, clkctrl_offs);
+ return 0;
+}
+
+/**
+ * omap_cm_module_disable - disable a module
+ * @part: PRCM partition
+ * @inst: PRCM instance
+ * @clkctrl_offs: CM_CLKCTRL register offset for the module
+ *
+ * Disables clocks for a module identified by (@part, @inst, @clkctrl_offs)
+ * makings its IO space inaccessible. Return 0 upon success, -EINVAL if
+ * no per-SoC module_disable() function pointer has been registered.
+ */
+int omap_cm_module_disable(u8 part, u16 inst, u16 clkctrl_offs)
+{
+ if (!cm_ll_data->module_disable) {
+ WARN_ONCE(1, "cm: %s: no low-level function defined\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ cm_ll_data->module_disable(part, inst, clkctrl_offs);
+ return 0;
}
/**
#include "cm1_44xx.h"
#include "cm2_44xx.h"
#include "cm44xx.h"
-#include "cminst44xx.h"
#include "cm-regbits-34xx.h"
#include "prcm44xx.h"
#include "prm44xx.h"
/* Private functions */
+static u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx);
+
/**
* _clkctrl_idlest - read a CM_*_CLKCTRL register; mask & shift IDLEST bitfield
* @part: PRCM partition ID that the CM_CLKCTRL register exists in
* @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
* @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
*
* Return the IDLEST bitfield of a CM_*_CLKCTRL register, shifted down to
* bit 0.
*/
-static u32 _clkctrl_idlest(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs)
+static u32 _clkctrl_idlest(u8 part, u16 inst, u16 clkctrl_offs)
{
u32 v = omap4_cminst_read_inst_reg(part, inst, clkctrl_offs);
v &= OMAP4430_IDLEST_MASK;
* _is_module_ready - can module registers be accessed without causing an abort?
* @part: PRCM partition ID that the CM_CLKCTRL register exists in
* @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
* @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
*
* Returns true if the module's CM_*_CLKCTRL.IDLEST bitfield is either
* *FUNCTIONAL or *INTERFACE_IDLE; false otherwise.
*/
-static bool _is_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs)
+static bool _is_module_ready(u8 part, u16 inst, u16 clkctrl_offs)
{
u32 v;
- v = _clkctrl_idlest(part, inst, cdoffs, clkctrl_offs);
+ v = _clkctrl_idlest(part, inst, clkctrl_offs);
return (v == CLKCTRL_IDLEST_FUNCTIONAL ||
v == CLKCTRL_IDLEST_INTERFACE_IDLE) ? true : false;
}
-/* Public functions */
-
/* Read a register in a CM instance */
-u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx)
+static u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx)
{
BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
part == OMAP4430_INVALID_PRCM_PARTITION ||
}
/* Write into a register in a CM instance */
-void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx)
+static void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx)
{
BUG_ON(part >= OMAP4_MAX_PRCM_PARTITIONS ||
part == OMAP4430_INVALID_PRCM_PARTITION ||
}
/* Read-modify-write a register in CM1. Caller must lock */
-u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, u16 inst,
- s16 idx)
+static u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part, u16 inst,
+ s16 idx)
{
u32 v;
return v;
}
-u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, u16 inst, s16 idx)
+static u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, u16 inst, s16 idx)
{
return omap4_cminst_rmw_inst_reg_bits(bits, bits, part, inst, idx);
}
-u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, u16 inst, s16 idx)
+static u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, u16 inst,
+ s16 idx)
{
return omap4_cminst_rmw_inst_reg_bits(bits, 0x0, part, inst, idx);
}
-u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx, u32 mask)
+static u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx, u32 mask)
{
u32 v;
* Returns true if the clockdomain referred to by (@part, @inst, @cdoffs)
* is in hardware-supervised idle mode, or 0 otherwise.
*/
-bool omap4_cminst_is_clkdm_in_hwsup(u8 part, u16 inst, u16 cdoffs)
+static bool omap4_cminst_is_clkdm_in_hwsup(u8 part, u16 inst, u16 cdoffs)
{
u32 v;
* Put a clockdomain referred to by (@part, @inst, @cdoffs) into
* hardware-supervised idle mode. No return value.
*/
-void omap4_cminst_clkdm_enable_hwsup(u8 part, u16 inst, u16 cdoffs)
+static void omap4_cminst_clkdm_enable_hwsup(u8 part, u16 inst, u16 cdoffs)
{
_clktrctrl_write(OMAP34XX_CLKSTCTRL_ENABLE_AUTO, part, inst, cdoffs);
}
* software-supervised idle mode, i.e., controlled manually by the
* Linux OMAP clockdomain code. No return value.
*/
-void omap4_cminst_clkdm_disable_hwsup(u8 part, u16 inst, u16 cdoffs)
+static void omap4_cminst_clkdm_disable_hwsup(u8 part, u16 inst, u16 cdoffs)
{
_clktrctrl_write(OMAP34XX_CLKSTCTRL_DISABLE_AUTO, part, inst, cdoffs);
}
* Take a clockdomain referred to by (@part, @inst, @cdoffs) out of idle,
* waking it up. No return value.
*/
-void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs)
+static void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs)
{
_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_WAKEUP, part, inst, cdoffs);
}
*
*/
-void omap4_cminst_clkdm_force_sleep(u8 part, u16 inst, u16 cdoffs)
+static void omap4_cminst_clkdm_force_sleep(u8 part, u16 inst, u16 cdoffs)
{
_clktrctrl_write(OMAP34XX_CLKSTCTRL_FORCE_SLEEP, part, inst, cdoffs);
}
* omap4_cminst_wait_module_ready - wait for a module to be in 'func' state
* @part: PRCM partition ID that the CM_CLKCTRL register exists in
* @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
* @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ * @bit_shift: bit shift for the register, ignored for OMAP4+
*
* Wait for the module IDLEST to be functional. If the idle state is in any
* the non functional state (trans, idle or disabled), module and thus the
* sysconfig cannot be accessed and will probably lead to an "imprecise
* external abort"
*/
-int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs,
- u16 clkctrl_offs)
+static int omap4_cminst_wait_module_ready(u8 part, s16 inst, u16 clkctrl_offs,
+ u8 bit_shift)
{
int i = 0;
if (!clkctrl_offs)
return 0;
- omap_test_timeout(_is_module_ready(part, inst, cdoffs, clkctrl_offs),
+ omap_test_timeout(_is_module_ready(part, inst, clkctrl_offs),
MAX_MODULE_READY_TIME, i);
return (i < MAX_MODULE_READY_TIME) ? 0 : -EBUSY;
* state
* @part: PRCM partition ID that the CM_CLKCTRL register exists in
* @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
* @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
+ * @bit_shift: Bit shift for the register, ignored for OMAP4+
*
* Wait for the module IDLEST to be disabled. Some PRCM transition,
* like reset assertion or parent clock de-activation must wait the
* module to be fully disabled.
*/
-int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs)
+static int omap4_cminst_wait_module_idle(u8 part, s16 inst, u16 clkctrl_offs,
+ u8 bit_shift)
{
int i = 0;
if (!clkctrl_offs)
return 0;
- omap_test_timeout((_clkctrl_idlest(part, inst, cdoffs, clkctrl_offs) ==
+ omap_test_timeout((_clkctrl_idlest(part, inst, clkctrl_offs) ==
CLKCTRL_IDLEST_DISABLED),
MAX_MODULE_DISABLE_TIME, i);
* @mode: Module mode (SW or HW)
* @part: PRCM partition ID that the CM_CLKCTRL register exists in
* @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
* @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
*
* No return value.
*/
-void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs,
- u16 clkctrl_offs)
+static void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst,
+ u16 clkctrl_offs)
{
u32 v;
* omap4_cminst_module_disable - Disable the module inside CLKCTRL
* @part: PRCM partition ID that the CM_CLKCTRL register exists in
* @inst: CM instance register offset (*_INST macro)
- * @cdoffs: Clockdomain register offset (*_CDOFFS macro)
* @clkctrl_offs: Module clock control register offset (*_CLKCTRL macro)
*
* No return value.
*/
-void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
- u16 clkctrl_offs)
+static void omap4_cminst_module_disable(u8 part, u16 inst, u16 clkctrl_offs)
{
u32 v;
.clkdm_clk_enable = omap4_clkdm_clk_enable,
.clkdm_clk_disable = omap4_clkdm_clk_disable,
};
+
+static struct cm_ll_data omap4xxx_cm_ll_data = {
+ .wait_module_ready = &omap4_cminst_wait_module_ready,
+ .wait_module_idle = &omap4_cminst_wait_module_idle,
+ .module_enable = &omap4_cminst_module_enable,
+ .module_disable = &omap4_cminst_module_disable,
+};
+
+int __init omap4_cm_init(void)
+{
+ return cm_register(&omap4xxx_cm_ll_data);
+}
+
+static void __exit omap4_cm_exit(void)
+{
+ cm_unregister(&omap4xxx_cm_ll_data);
+}
+__exitcall(omap4_cm_exit);
+++ /dev/null
-/*
- * OMAP4 Clock Management (CM) function prototypes
- *
- * Copyright (C) 2010 Nokia Corporation
- * Paul Walmsley
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#ifndef __ARCH_ASM_MACH_OMAP2_CMINST44XX_H
-#define __ARCH_ASM_MACH_OMAP2_CMINST44XX_H
-
-bool omap4_cminst_is_clkdm_in_hwsup(u8 part, u16 inst, u16 cdoffs);
-void omap4_cminst_clkdm_enable_hwsup(u8 part, u16 inst, u16 cdoffs);
-void omap4_cminst_clkdm_disable_hwsup(u8 part, u16 inst, u16 cdoffs);
-void omap4_cminst_clkdm_force_sleep(u8 part, u16 inst, u16 cdoffs);
-void omap4_cminst_clkdm_force_wakeup(u8 part, u16 inst, u16 cdoffs);
-extern int omap4_cminst_wait_module_ready(u8 part, u16 inst, s16 cdoffs, u16 clkctrl_offs);
-extern int omap4_cminst_wait_module_idle(u8 part, u16 inst, s16 cdoffs,
- u16 clkctrl_offs);
-extern void omap4_cminst_module_enable(u8 mode, u8 part, u16 inst, s16 cdoffs,
- u16 clkctrl_offs);
-extern void omap4_cminst_module_disable(u8 part, u16 inst, s16 cdoffs,
- u16 clkctrl_offs);
-/*
- * In an ideal world, we would not export these low-level functions,
- * but this will probably take some time to fix properly
- */
-u32 omap4_cminst_read_inst_reg(u8 part, u16 inst, u16 idx);
-void omap4_cminst_write_inst_reg(u32 val, u8 part, u16 inst, u16 idx);
-u32 omap4_cminst_rmw_inst_reg_bits(u32 mask, u32 bits, u8 part,
- u16 inst, s16 idx);
-u32 omap4_cminst_set_inst_reg_bits(u32 bits, u8 part, u16 inst,
- s16 idx);
-u32 omap4_cminst_clear_inst_reg_bits(u32 bits, u8 part, u16 inst,
- s16 idx);
-extern u32 omap4_cminst_read_inst_reg_bits(u8 part, u16 inst, s16 idx,
- u32 mask);
-
-extern void omap_cm_base_init(void);
-
-#endif
* To avoid code running on other OMAPs in
* multi-omap builds
*/
- if (!(cpu_is_omap34xx()))
+ if (!(cpu_is_omap34xx()) || of_have_populated_dt())
return -ENODEV;
snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main");
}
omap_postcore_initcall(omap3_l3_init);
-static int __init omap4_l3_init(void)
-{
- int i;
- struct omap_hwmod *oh[3];
- struct platform_device *pdev;
- char oh_name[L3_MODULES_MAX_LEN];
-
- /* If dtb is there, the devices will be created dynamically */
- if (of_have_populated_dt())
- return -ENODEV;
-
- /*
- * To avoid code running on other OMAPs in
- * multi-omap builds
- */
- if (!cpu_is_omap44xx() && !soc_is_omap54xx())
- return -ENODEV;
-
- for (i = 0; i < L3_MODULES; i++) {
- snprintf(oh_name, L3_MODULES_MAX_LEN, "l3_main_%d", i+1);
-
- oh[i] = omap_hwmod_lookup(oh_name);
- if (!(oh[i]))
- pr_err("could not look up %s\n", oh_name);
- }
-
- pdev = omap_device_build_ss("omap_l3_noc", 0, oh, 3, NULL, 0);
-
- WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
-
- return PTR_RET(pdev);
-}
-omap_postcore_initcall(omap4_l3_init);
-
#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
static struct resource omap2cam_resources[] = {
return 0;
}
omap_arch_initcall(omap2_init_devices);
+
+static int __init omap_gpmc_init(void)
+{
+ struct omap_hwmod *oh;
+ struct platform_device *pdev;
+ char *oh_name = "gpmc";
+
+ /*
+ * if the board boots up with a populated DT, do not
+ * manually add the device from this initcall
+ */
+ if (of_have_populated_dt())
+ return -ENODEV;
+
+ oh = omap_hwmod_lookup(oh_name);
+ if (!oh) {
+ pr_err("Could not look up %s\n", oh_name);
+ return -ENODEV;
+ }
+
+ pdev = omap_device_build("omap-gpmc", -1, oh, NULL, 0);
+ WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
+
+ return PTR_RET(pdev);
+}
+omap_postcore_initcall(omap_gpmc_init);
/* Non-CORE DPLL rate set code */
/**
- * omap3_noncore_dpll_set_rate - set non-core DPLL rate
- * @clk: struct clk * of DPLL to set
- * @rate: rounded target rate
+ * omap3_noncore_dpll_determine_rate - determine rate for a DPLL
+ * @hw: pointer to the clock to determine rate for
+ * @rate: target rate for the DPLL
+ * @best_parent_rate: pointer for returning best parent rate
+ * @best_parent_clk: pointer for returning best parent clock
*
- * Set the DPLL CLKOUT to the target rate. If the DPLL can enter
- * low-power bypass, and the target rate is the bypass source clock
- * rate, then configure the DPLL for bypass. Otherwise, round the
- * target rate if it hasn't been done already, then program and lock
- * the DPLL. Returns -EINVAL upon error, or 0 upon success.
+ * Determines which DPLL mode to use for reaching a desired target rate.
+ * Checks whether the DPLL shall be in bypass or locked mode, and if
+ * locked, calculates the M,N values for the DPLL via round-rate.
+ * Returns a positive clock rate with success, negative error value
+ * in failure.
*/
-int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
- unsigned long parent_rate)
+long omap3_noncore_dpll_determine_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *best_parent_rate,
+ struct clk **best_parent_clk)
{
struct clk_hw_omap *clk = to_clk_hw_omap(hw);
- struct clk *new_parent = NULL;
- unsigned long rrate;
- u16 freqsel = 0;
struct dpll_data *dd;
- int ret;
if (!hw || !rate)
return -EINVAL;
if (__clk_get_rate(dd->clk_bypass) == rate &&
(dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
- pr_debug("%s: %s: set rate: entering bypass.\n",
- __func__, __clk_get_name(hw->clk));
+ *best_parent_clk = dd->clk_bypass;
+ } else {
+ rate = omap2_dpll_round_rate(hw, rate, best_parent_rate);
+ *best_parent_clk = dd->clk_ref;
+ }
+
+ *best_parent_rate = rate;
+
+ return rate;
+}
+
+/**
+ * omap3_noncore_dpll_set_parent - set parent for a DPLL clock
+ * @hw: pointer to the clock to set parent for
+ * @index: parent index to select
+ *
+ * Sets parent for a DPLL clock. This sets the DPLL into bypass or
+ * locked mode. Returns 0 with success, negative error value otherwise.
+ */
+int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ int ret;
- __clk_prepare(dd->clk_bypass);
- clk_enable(dd->clk_bypass);
+ if (!hw)
+ return -EINVAL;
+
+ if (index)
ret = _omap3_noncore_dpll_bypass(clk);
- if (!ret)
- new_parent = dd->clk_bypass;
- clk_disable(dd->clk_bypass);
- __clk_unprepare(dd->clk_bypass);
- } else {
- __clk_prepare(dd->clk_ref);
- clk_enable(dd->clk_ref);
-
- /* XXX this check is probably pointless in the CCF context */
- if (dd->last_rounded_rate != rate) {
- rrate = __clk_round_rate(hw->clk, rate);
- if (rrate != rate) {
- pr_warn("%s: %s: final rate %lu does not match desired rate %lu\n",
- __func__, __clk_get_name(hw->clk),
- rrate, rate);
- rate = rrate;
- }
- }
+ else
+ ret = _omap3_noncore_dpll_lock(clk);
- if (dd->last_rounded_rate == 0)
- return -EINVAL;
+ return ret;
+}
- /* Freqsel is available only on OMAP343X devices */
- if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
- freqsel = _omap3_dpll_compute_freqsel(clk,
- dd->last_rounded_n);
- WARN_ON(!freqsel);
- }
+/**
+ * omap3_noncore_dpll_set_rate - set rate for a DPLL clock
+ * @hw: pointer to the clock to set parent for
+ * @rate: target rate for the clock
+ * @parent_rate: rate of the parent clock
+ *
+ * Sets rate for a DPLL clock. First checks if the clock parent is
+ * reference clock (in bypass mode, the rate of the clock can't be
+ * changed) and proceeds with the rate change operation. Returns 0
+ * with success, negative error value otherwise.
+ */
+int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *dd;
+ u16 freqsel = 0;
+ int ret;
+
+ if (!hw || !rate)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
- pr_debug("%s: %s: set rate: locking rate to %lu.\n",
- __func__, __clk_get_name(hw->clk), rate);
+ if (__clk_get_parent(hw->clk) != dd->clk_ref)
+ return -EINVAL;
+
+ if (dd->last_rounded_rate == 0)
+ return -EINVAL;
- ret = omap3_noncore_dpll_program(clk, freqsel);
- if (!ret)
- new_parent = dd->clk_ref;
- clk_disable(dd->clk_ref);
- __clk_unprepare(dd->clk_ref);
+ /* Freqsel is available only on OMAP343X devices */
+ if (ti_clk_features.flags & TI_CLK_DPLL_HAS_FREQSEL) {
+ freqsel = _omap3_dpll_compute_freqsel(clk, dd->last_rounded_n);
+ WARN_ON(!freqsel);
}
- /*
- * FIXME - this is all wrong. common code handles reparenting and
- * migrating prepare/enable counts. dplls should be a multiplexer
- * clock and this should be a set_parent operation so that all of that
- * stuff is inherited for free
- */
- if (!ret && clk_get_parent(hw->clk) != new_parent)
- __clk_reparent(hw->clk, new_parent);
+ pr_debug("%s: %s: set rate: locking rate to %lu.\n", __func__,
+ __clk_get_name(hw->clk), rate);
- return 0;
+ ret = omap3_noncore_dpll_program(clk, freqsel);
+
+ return ret;
+}
+
+/**
+ * omap3_noncore_dpll_set_rate_and_parent - set rate and parent for a DPLL clock
+ * @hw: pointer to the clock to set rate and parent for
+ * @rate: target rate for the DPLL
+ * @parent_rate: clock rate of the DPLL parent
+ * @index: new parent index for the DPLL, 0 - reference, 1 - bypass
+ *
+ * Sets rate and parent for a DPLL clock. If new parent is the bypass
+ * clock, only selects the parent. Otherwise proceeds with a rate
+ * change, as this will effectively also change the parent as the
+ * DPLL is put into locked mode. Returns 0 with success, negative error
+ * value otherwise.
+ */
+int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate,
+ u8 index)
+{
+ int ret;
+
+ if (!hw || !rate)
+ return -EINVAL;
+
+ /*
+ * clk-ref at index[0], in which case we only need to set rate,
+ * the parent will be changed automatically with the lock sequence.
+ * With clk-bypass case we only need to change parent.
+ */
+ if (index)
+ ret = omap3_noncore_dpll_set_parent(hw, index);
+ else
+ ret = omap3_noncore_dpll_set_rate(hw, rate, parent_rate);
+
+ return ret;
}
/* DPLL autoidle read/set code */
return dd->last_rounded_rate;
}
+
+/**
+ * omap4_dpll_regm4xen_determine_rate - determine rate for a DPLL
+ * @hw: pointer to the clock to determine rate for
+ * @rate: target rate for the DPLL
+ * @best_parent_rate: pointer for returning best parent rate
+ * @best_parent_clk: pointer for returning best parent clock
+ *
+ * Determines which DPLL mode to use for reaching a desired rate.
+ * Checks whether the DPLL shall be in bypass or locked mode, and if
+ * locked, calculates the M,N values for the DPLL via round-rate.
+ * Returns a positive clock rate with success, negative error value
+ * in failure.
+ */
+long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw, unsigned long rate,
+ unsigned long *best_parent_rate,
+ struct clk **best_parent_clk)
+{
+ struct clk_hw_omap *clk = to_clk_hw_omap(hw);
+ struct dpll_data *dd;
+
+ if (!hw || !rate)
+ return -EINVAL;
+
+ dd = clk->dpll_data;
+ if (!dd)
+ return -EINVAL;
+
+ if (__clk_get_rate(dd->clk_bypass) == rate &&
+ (dd->modes & (1 << DPLL_LOW_POWER_BYPASS))) {
+ *best_parent_clk = dd->clk_bypass;
+ } else {
+ rate = omap4_dpll_regm4xen_round_rate(hw, rate,
+ best_parent_rate);
+ *best_parent_clk = dd->clk_ref;
+ }
+
+ *best_parent_rate = rate;
+
+ return rate;
+}
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/io.h>
+#include <linux/omap-gpmc.h>
#include <linux/mtd/nand.h>
#include <linux/platform_data/mtd-nand-omap2.h>
#include <asm/mach/flash.h>
-#include "gpmc.h"
#include "soc.h"
-#include "gpmc-nand.h"
/* minimum size for IO mapping */
#define NAND_IO_SIZE 4
+++ /dev/null
-/*
- * arch/arm/mach-omap2/gpmc-nand.h
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __OMAP2_GPMC_NAND_H
-#define __OMAP2_GPMC_NAND_H
-
-#include "gpmc.h"
-#include <linux/platform_data/mtd-nand-omap2.h>
-
-#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2)
-extern int gpmc_nand_init(struct omap_nand_platform_data *d,
- struct gpmc_timings *gpmc_t);
-#else
-static inline int gpmc_nand_init(struct omap_nand_platform_data *d,
- struct gpmc_timings *gpmc_t)
-{
- return 0;
-}
-#endif
-
-#endif
#include <linux/platform_device.h>
#include <linux/mtd/onenand_regs.h>
#include <linux/io.h>
+#include <linux/omap-gpmc.h>
#include <linux/platform_data/mtd-onenand-omap2.h>
#include <linux/err.h>
#include <asm/mach/flash.h>
-#include "gpmc.h"
#include "soc.h"
-#include "gpmc-onenand.h"
#define ONENAND_IO_SIZE SZ_128K
+++ /dev/null
-/*
- * arch/arm/mach-omap2/gpmc-onenand.h
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#ifndef __OMAP2_GPMC_ONENAND_H
-#define __OMAP2_GPMC_ONENAND_H
-
-#include <linux/platform_data/mtd-onenand-omap2.h>
-
-#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
-extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
-#else
-#define board_onenand_data NULL
-static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
-{
-}
-#endif
-
-#endif
+++ /dev/null
-/*
- * linux/arch/arm/mach-omap2/gpmc-smc91x.c
- *
- * Copyright (C) 2009 Nokia Corporation
- * Contact: Tony Lindgren
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/smc91x.h>
-
-#include "gpmc.h"
-#include "gpmc-smc91x.h"
-
-#include "soc.h"
-
-static struct omap_smc91x_platform_data *gpmc_cfg;
-
-static struct resource gpmc_smc91x_resources[] = {
- [0] = {
- .flags = IORESOURCE_MEM,
- },
- [1] = {
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct smc91x_platdata gpmc_smc91x_info = {
- .flags = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0,
- .leda = RPC_LED_100_10,
- .ledb = RPC_LED_TX_RX,
-};
-
-static struct platform_device gpmc_smc91x_device = {
- .name = "smc91x",
- .id = -1,
- .dev = {
- .platform_data = &gpmc_smc91x_info,
- },
- .num_resources = ARRAY_SIZE(gpmc_smc91x_resources),
- .resource = gpmc_smc91x_resources,
-};
-
-static struct gpmc_settings smc91x_settings = {
- .device_width = GPMC_DEVWIDTH_16BIT,
-};
-
-/*
- * Set the gpmc timings for smc91c96. The timings are taken
- * from the data sheet available at:
- * http://www.smsc.com/main/catalog/lan91c96.html
- * REVISIT: Level shifters can add at least to the access latency.
- */
-static int smc91c96_gpmc_retime(void)
-{
- struct gpmc_timings t;
- struct gpmc_device_timings dev_t;
- const int t3 = 10; /* Figure 12.2 read and 12.4 write */
- const int t4_r = 20; /* Figure 12.2 read */
- const int t4_w = 5; /* Figure 12.4 write */
- const int t5 = 25; /* Figure 12.2 read */
- const int t6 = 15; /* Figure 12.2 read */
- const int t7 = 5; /* Figure 12.4 write */
- const int t8 = 5; /* Figure 12.4 write */
- const int t20 = 185; /* Figure 12.2 read and 12.4 write */
-
- /*
- * FIXME: Calculate the address and data bus muxed timings.
- * Note that at least adv_rd_off needs to be changed according
- * to omap3430 TRM Figure 11-11. Are the sdp boards using the
- * FPGA in between smc91x and omap as the timings are different
- * from above?
- */
- if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
- return 0;
-
- memset(&dev_t, 0, sizeof(dev_t));
-
- dev_t.t_oeasu = t3 * 1000;
- dev_t.t_oe = t5 * 1000;
- dev_t.t_cez_r = t4_r * 1000;
- dev_t.t_oez = t6 * 1000;
- dev_t.t_rd_cycle = (t20 - t3) * 1000;
-
- dev_t.t_weasu = t3 * 1000;
- dev_t.t_wpl = t7 * 1000;
- dev_t.t_wph = t8 * 1000;
- dev_t.t_cez_w = t4_w * 1000;
- dev_t.t_wr_cycle = (t20 - t3) * 1000;
-
- gpmc_calc_timings(&t, &smc91x_settings, &dev_t);
-
- return gpmc_cs_set_timings(gpmc_cfg->cs, &t);
-}
-
-/*
- * Initialize smc91x device connected to the GPMC. Note that we
- * assume that pin multiplexing is done in the board-*.c file,
- * or in the bootloader.
- */
-void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data)
-{
- unsigned long cs_mem_base;
- int ret;
-
- gpmc_cfg = board_data;
-
- if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96)
- gpmc_cfg->retime = smc91c96_gpmc_retime;
-
- if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
- printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
- return;
- }
-
- gpmc_smc91x_resources[0].start = cs_mem_base + 0x300;
- gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f;
- gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK);
-
- if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
- smc91x_settings.mux_add_data = GPMC_MUX_AD;
- if (gpmc_cfg->flags & GPMC_READ_MON)
- smc91x_settings.wait_on_read = true;
- if (gpmc_cfg->flags & GPMC_WRITE_MON)
- smc91x_settings.wait_on_write = true;
- if (gpmc_cfg->wait_pin)
- smc91x_settings.wait_pin = gpmc_cfg->wait_pin;
- ret = gpmc_cs_program_settings(gpmc_cfg->cs, &smc91x_settings);
- if (ret < 0)
- goto free1;
-
- if (gpmc_cfg->retime) {
- ret = gpmc_cfg->retime();
- if (ret != 0)
- goto free1;
- }
-
- if (gpio_request_one(gpmc_cfg->gpio_irq, GPIOF_IN, "SMC91X irq") < 0)
- goto free1;
-
- gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
-
- if (gpmc_cfg->gpio_pwrdwn) {
- ret = gpio_request_one(gpmc_cfg->gpio_pwrdwn,
- GPIOF_OUT_INIT_LOW, "SMC91X powerdown");
- if (ret)
- goto free2;
- }
-
- if (gpmc_cfg->gpio_reset) {
- ret = gpio_request_one(gpmc_cfg->gpio_reset,
- GPIOF_OUT_INIT_LOW, "SMC91X reset");
- if (ret)
- goto free3;
-
- gpio_set_value(gpmc_cfg->gpio_reset, 1);
- msleep(100);
- gpio_set_value(gpmc_cfg->gpio_reset, 0);
- }
-
- if (platform_device_register(&gpmc_smc91x_device) < 0) {
- printk(KERN_ERR "Unable to register smc91x device\n");
- gpio_free(gpmc_cfg->gpio_reset);
- goto free3;
- }
-
- return;
-
-free3:
- if (gpmc_cfg->gpio_pwrdwn)
- gpio_free(gpmc_cfg->gpio_pwrdwn);
-free2:
- gpio_free(gpmc_cfg->gpio_irq);
-free1:
- gpmc_cs_free(gpmc_cfg->cs);
-
- printk(KERN_ERR "Could not initialize smc91x\n");
-}
+++ /dev/null
-/*
- * arch/arm/plat-omap/include/mach/gpmc-smc91x.h
- *
- * Copyright (C) 2009 Nokia Corporation
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_OMAP_GPMC_SMC91X_H__
-
-#define GPMC_TIMINGS_SMC91C96 (1 << 4)
-#define GPMC_MUX_ADD_DATA (1 << 5) /* GPMC_CONFIG1_MUXADDDATA */
-#define GPMC_READ_MON (1 << 6) /* GPMC_CONFIG1_WAIT_READ_MON */
-#define GPMC_WRITE_MON (1 << 7) /* GPMC_CONFIG1_WAIT_WRITE_MON */
-
-struct omap_smc91x_platform_data {
- int cs;
- int gpio_irq;
- int gpio_pwrdwn;
- int gpio_reset;
- int wait_pin; /* Optional GPMC_CONFIG1_WAITPINSELECT */
- u32 flags;
- int (*retime)(void);
-};
-
-#if defined(CONFIG_SMC91X) || \
- defined(CONFIG_SMC91X_MODULE)
-
-extern void gpmc_smc91x_init(struct omap_smc91x_platform_data *d);
-
-#else
-
-#define board_smc91x_data NULL
-
-static inline void gpmc_smc91x_init(struct omap_smc91x_platform_data *d)
-{
-}
-
-#endif
-#endif
+++ /dev/null
-/*
- * GPMC support functions
- *
- * Copyright (C) 2005-2006 Nokia Corporation
- *
- * Author: Juha Yrjola
- *
- * Copyright (C) 2009 Texas Instruments
- * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#undef DEBUG
-
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/ioport.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_mtd.h>
-#include <linux/of_device.h>
-#include <linux/mtd/nand.h>
-#include <linux/pm_runtime.h>
-
-#include <linux/platform_data/mtd-nand-omap2.h>
-
-#include <asm/mach-types.h>
-
-#include "soc.h"
-#include "common.h"
-#include "omap_device.h"
-#include "gpmc.h"
-#include "gpmc-nand.h"
-#include "gpmc-onenand.h"
-
-#define DEVICE_NAME "omap-gpmc"
-
-/* GPMC register offsets */
-#define GPMC_REVISION 0x00
-#define GPMC_SYSCONFIG 0x10
-#define GPMC_SYSSTATUS 0x14
-#define GPMC_IRQSTATUS 0x18
-#define GPMC_IRQENABLE 0x1c
-#define GPMC_TIMEOUT_CONTROL 0x40
-#define GPMC_ERR_ADDRESS 0x44
-#define GPMC_ERR_TYPE 0x48
-#define GPMC_CONFIG 0x50
-#define GPMC_STATUS 0x54
-#define GPMC_PREFETCH_CONFIG1 0x1e0
-#define GPMC_PREFETCH_CONFIG2 0x1e4
-#define GPMC_PREFETCH_CONTROL 0x1ec
-#define GPMC_PREFETCH_STATUS 0x1f0
-#define GPMC_ECC_CONFIG 0x1f4
-#define GPMC_ECC_CONTROL 0x1f8
-#define GPMC_ECC_SIZE_CONFIG 0x1fc
-#define GPMC_ECC1_RESULT 0x200
-#define GPMC_ECC_BCH_RESULT_0 0x240 /* not available on OMAP2 */
-#define GPMC_ECC_BCH_RESULT_1 0x244 /* not available on OMAP2 */
-#define GPMC_ECC_BCH_RESULT_2 0x248 /* not available on OMAP2 */
-#define GPMC_ECC_BCH_RESULT_3 0x24c /* not available on OMAP2 */
-#define GPMC_ECC_BCH_RESULT_4 0x300 /* not available on OMAP2 */
-#define GPMC_ECC_BCH_RESULT_5 0x304 /* not available on OMAP2 */
-#define GPMC_ECC_BCH_RESULT_6 0x308 /* not available on OMAP2 */
-
-/* GPMC ECC control settings */
-#define GPMC_ECC_CTRL_ECCCLEAR 0x100
-#define GPMC_ECC_CTRL_ECCDISABLE 0x000
-#define GPMC_ECC_CTRL_ECCREG1 0x001
-#define GPMC_ECC_CTRL_ECCREG2 0x002
-#define GPMC_ECC_CTRL_ECCREG3 0x003
-#define GPMC_ECC_CTRL_ECCREG4 0x004
-#define GPMC_ECC_CTRL_ECCREG5 0x005
-#define GPMC_ECC_CTRL_ECCREG6 0x006
-#define GPMC_ECC_CTRL_ECCREG7 0x007
-#define GPMC_ECC_CTRL_ECCREG8 0x008
-#define GPMC_ECC_CTRL_ECCREG9 0x009
-
-#define GPMC_CONFIG2_CSEXTRADELAY BIT(7)
-#define GPMC_CONFIG3_ADVEXTRADELAY BIT(7)
-#define GPMC_CONFIG4_OEEXTRADELAY BIT(7)
-#define GPMC_CONFIG4_WEEXTRADELAY BIT(23)
-#define GPMC_CONFIG6_CYCLE2CYCLEDIFFCSEN BIT(6)
-#define GPMC_CONFIG6_CYCLE2CYCLESAMECSEN BIT(7)
-
-#define GPMC_CS0_OFFSET 0x60
-#define GPMC_CS_SIZE 0x30
-#define GPMC_BCH_SIZE 0x10
-
-#define GPMC_MEM_END 0x3FFFFFFF
-
-#define GPMC_CHUNK_SHIFT 24 /* 16 MB */
-#define GPMC_SECTION_SHIFT 28 /* 128 MB */
-
-#define CS_NUM_SHIFT 24
-#define ENABLE_PREFETCH (0x1 << 7)
-#define DMA_MPU_MODE 2
-
-#define GPMC_REVISION_MAJOR(l) ((l >> 4) & 0xf)
-#define GPMC_REVISION_MINOR(l) (l & 0xf)
-
-#define GPMC_HAS_WR_ACCESS 0x1
-#define GPMC_HAS_WR_DATA_MUX_BUS 0x2
-#define GPMC_HAS_MUX_AAD 0x4
-
-#define GPMC_NR_WAITPINS 4
-
-/* XXX: Only NAND irq has been considered,currently these are the only ones used
- */
-#define GPMC_NR_IRQ 2
-
-struct gpmc_client_irq {
- unsigned irq;
- u32 bitmask;
-};
-
-/* Structure to save gpmc cs context */
-struct gpmc_cs_config {
- u32 config1;
- u32 config2;
- u32 config3;
- u32 config4;
- u32 config5;
- u32 config6;
- u32 config7;
- int is_valid;
-};
-
-/*
- * Structure to save/restore gpmc context
- * to support core off on OMAP3
- */
-struct omap3_gpmc_regs {
- u32 sysconfig;
- u32 irqenable;
- u32 timeout_ctrl;
- u32 config;
- u32 prefetch_config1;
- u32 prefetch_config2;
- u32 prefetch_control;
- struct gpmc_cs_config cs_context[GPMC_CS_NUM];
-};
-
-static struct gpmc_client_irq gpmc_client_irq[GPMC_NR_IRQ];
-static struct irq_chip gpmc_irq_chip;
-static int gpmc_irq_start;
-
-static struct resource gpmc_mem_root;
-static struct resource gpmc_cs_mem[GPMC_CS_NUM];
-static DEFINE_SPINLOCK(gpmc_mem_lock);
-/* Define chip-selects as reserved by default until probe completes */
-static unsigned int gpmc_cs_map = ((1 << GPMC_CS_NUM) - 1);
-static unsigned int gpmc_cs_num = GPMC_CS_NUM;
-static unsigned int gpmc_nr_waitpins;
-static struct device *gpmc_dev;
-static int gpmc_irq;
-static resource_size_t phys_base, mem_size;
-static unsigned gpmc_capability;
-static void __iomem *gpmc_base;
-
-static struct clk *gpmc_l3_clk;
-
-static irqreturn_t gpmc_handle_irq(int irq, void *dev);
-
-static void gpmc_write_reg(int idx, u32 val)
-{
- writel_relaxed(val, gpmc_base + idx);
-}
-
-static u32 gpmc_read_reg(int idx)
-{
- return readl_relaxed(gpmc_base + idx);
-}
-
-void gpmc_cs_write_reg(int cs, int idx, u32 val)
-{
- void __iomem *reg_addr;
-
- reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
- writel_relaxed(val, reg_addr);
-}
-
-static u32 gpmc_cs_read_reg(int cs, int idx)
-{
- void __iomem *reg_addr;
-
- reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
- return readl_relaxed(reg_addr);
-}
-
-/* TODO: Add support for gpmc_fck to clock framework and use it */
-static unsigned long gpmc_get_fclk_period(void)
-{
- unsigned long rate = clk_get_rate(gpmc_l3_clk);
-
- if (rate == 0) {
- printk(KERN_WARNING "gpmc_l3_clk not enabled\n");
- return 0;
- }
-
- rate /= 1000;
- rate = 1000000000 / rate; /* In picoseconds */
-
- return rate;
-}
-
-static unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
-{
- unsigned long tick_ps;
-
- /* Calculate in picosecs to yield more exact results */
- tick_ps = gpmc_get_fclk_period();
-
- return (time_ns * 1000 + tick_ps - 1) / tick_ps;
-}
-
-static unsigned int gpmc_ps_to_ticks(unsigned int time_ps)
-{
- unsigned long tick_ps;
-
- /* Calculate in picosecs to yield more exact results */
- tick_ps = gpmc_get_fclk_period();
-
- return (time_ps + tick_ps - 1) / tick_ps;
-}
-
-unsigned int gpmc_ticks_to_ns(unsigned int ticks)
-{
- return ticks * gpmc_get_fclk_period() / 1000;
-}
-
-static unsigned int gpmc_ticks_to_ps(unsigned int ticks)
-{
- return ticks * gpmc_get_fclk_period();
-}
-
-static unsigned int gpmc_round_ps_to_ticks(unsigned int time_ps)
-{
- unsigned long ticks = gpmc_ps_to_ticks(time_ps);
-
- return ticks * gpmc_get_fclk_period();
-}
-
-static inline void gpmc_cs_modify_reg(int cs, int reg, u32 mask, bool value)
-{
- u32 l;
-
- l = gpmc_cs_read_reg(cs, reg);
- if (value)
- l |= mask;
- else
- l &= ~mask;
- gpmc_cs_write_reg(cs, reg, l);
-}
-
-static void gpmc_cs_bool_timings(int cs, const struct gpmc_bool_timings *p)
-{
- gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG1,
- GPMC_CONFIG1_TIME_PARA_GRAN,
- p->time_para_granularity);
- gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG2,
- GPMC_CONFIG2_CSEXTRADELAY, p->cs_extra_delay);
- gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG3,
- GPMC_CONFIG3_ADVEXTRADELAY, p->adv_extra_delay);
- gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG4,
- GPMC_CONFIG4_OEEXTRADELAY, p->oe_extra_delay);
- gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG4,
- GPMC_CONFIG4_OEEXTRADELAY, p->we_extra_delay);
- gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG6,
- GPMC_CONFIG6_CYCLE2CYCLESAMECSEN,
- p->cycle2cyclesamecsen);
- gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG6,
- GPMC_CONFIG6_CYCLE2CYCLEDIFFCSEN,
- p->cycle2cyclediffcsen);
-}
-
-#ifdef DEBUG
-static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
- int time, const char *name)
-#else
-static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
- int time)
-#endif
-{
- u32 l;
- int ticks, mask, nr_bits;
-
- if (time == 0)
- ticks = 0;
- else
- ticks = gpmc_ns_to_ticks(time);
- nr_bits = end_bit - st_bit + 1;
- if (ticks >= 1 << nr_bits) {
-#ifdef DEBUG
- printk(KERN_INFO "GPMC CS%d: %-10s* %3d ns, %3d ticks >= %d\n",
- cs, name, time, ticks, 1 << nr_bits);
-#endif
- return -1;
- }
-
- mask = (1 << nr_bits) - 1;
- l = gpmc_cs_read_reg(cs, reg);
-#ifdef DEBUG
- printk(KERN_INFO
- "GPMC CS%d: %-10s: %3d ticks, %3lu ns (was %3i ticks) %3d ns\n",
- cs, name, ticks, gpmc_get_fclk_period() * ticks / 1000,
- (l >> st_bit) & mask, time);
-#endif
- l &= ~(mask << st_bit);
- l |= ticks << st_bit;
- gpmc_cs_write_reg(cs, reg, l);
-
- return 0;
-}
-
-#ifdef DEBUG
-#define GPMC_SET_ONE(reg, st, end, field) \
- if (set_gpmc_timing_reg(cs, (reg), (st), (end), \
- t->field, #field) < 0) \
- return -1
-#else
-#define GPMC_SET_ONE(reg, st, end, field) \
- if (set_gpmc_timing_reg(cs, (reg), (st), (end), t->field) < 0) \
- return -1
-#endif
-
-int gpmc_calc_divider(unsigned int sync_clk)
-{
- int div;
- u32 l;
-
- l = sync_clk + (gpmc_get_fclk_period() - 1);
- div = l / gpmc_get_fclk_period();
- if (div > 4)
- return -1;
- if (div <= 0)
- div = 1;
-
- return div;
-}
-
-int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
-{
- int div;
- u32 l;
-
- div = gpmc_calc_divider(t->sync_clk);
- if (div < 0)
- return div;
-
- GPMC_SET_ONE(GPMC_CS_CONFIG2, 0, 3, cs_on);
- GPMC_SET_ONE(GPMC_CS_CONFIG2, 8, 12, cs_rd_off);
- GPMC_SET_ONE(GPMC_CS_CONFIG2, 16, 20, cs_wr_off);
-
- GPMC_SET_ONE(GPMC_CS_CONFIG3, 0, 3, adv_on);
- GPMC_SET_ONE(GPMC_CS_CONFIG3, 8, 12, adv_rd_off);
- GPMC_SET_ONE(GPMC_CS_CONFIG3, 16, 20, adv_wr_off);
-
- GPMC_SET_ONE(GPMC_CS_CONFIG4, 0, 3, oe_on);
- GPMC_SET_ONE(GPMC_CS_CONFIG4, 8, 12, oe_off);
- GPMC_SET_ONE(GPMC_CS_CONFIG4, 16, 19, we_on);
- GPMC_SET_ONE(GPMC_CS_CONFIG4, 24, 28, we_off);
-
- GPMC_SET_ONE(GPMC_CS_CONFIG5, 0, 4, rd_cycle);
- GPMC_SET_ONE(GPMC_CS_CONFIG5, 8, 12, wr_cycle);
- GPMC_SET_ONE(GPMC_CS_CONFIG5, 16, 20, access);
-
- GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access);
-
- GPMC_SET_ONE(GPMC_CS_CONFIG6, 0, 3, bus_turnaround);
- GPMC_SET_ONE(GPMC_CS_CONFIG6, 8, 11, cycle2cycle_delay);
-
- GPMC_SET_ONE(GPMC_CS_CONFIG1, 18, 19, wait_monitoring);
- GPMC_SET_ONE(GPMC_CS_CONFIG1, 25, 26, clk_activation);
-
- if (gpmc_capability & GPMC_HAS_WR_DATA_MUX_BUS)
- GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus);
- if (gpmc_capability & GPMC_HAS_WR_ACCESS)
- GPMC_SET_ONE(GPMC_CS_CONFIG6, 24, 28, wr_access);
-
- /* caller is expected to have initialized CONFIG1 to cover
- * at least sync vs async
- */
- l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
- if (l & (GPMC_CONFIG1_READTYPE_SYNC | GPMC_CONFIG1_WRITETYPE_SYNC)) {
-#ifdef DEBUG
- printk(KERN_INFO "GPMC CS%d CLK period is %lu ns (div %d)\n",
- cs, (div * gpmc_get_fclk_period()) / 1000, div);
-#endif
- l &= ~0x03;
- l |= (div - 1);
- gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, l);
- }
-
- gpmc_cs_bool_timings(cs, &t->bool_timings);
-
- return 0;
-}
-
-static int gpmc_cs_enable_mem(int cs, u32 base, u32 size)
-{
- u32 l;
- u32 mask;
-
- /*
- * Ensure that base address is aligned on a
- * boundary equal to or greater than size.
- */
- if (base & (size - 1))
- return -EINVAL;
-
- mask = (1 << GPMC_SECTION_SHIFT) - size;
- l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
- l &= ~0x3f;
- l = (base >> GPMC_CHUNK_SHIFT) & 0x3f;
- l &= ~(0x0f << 8);
- l |= ((mask >> GPMC_CHUNK_SHIFT) & 0x0f) << 8;
- l |= GPMC_CONFIG7_CSVALID;
- gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
-
- return 0;
-}
-
-static void gpmc_cs_disable_mem(int cs)
-{
- u32 l;
-
- l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
- l &= ~GPMC_CONFIG7_CSVALID;
- gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
-}
-
-static void gpmc_cs_get_memconf(int cs, u32 *base, u32 *size)
-{
- u32 l;
- u32 mask;
-
- l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
- *base = (l & 0x3f) << GPMC_CHUNK_SHIFT;
- mask = (l >> 8) & 0x0f;
- *size = (1 << GPMC_SECTION_SHIFT) - (mask << GPMC_CHUNK_SHIFT);
-}
-
-static int gpmc_cs_mem_enabled(int cs)
-{
- u32 l;
-
- l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
- return l & GPMC_CONFIG7_CSVALID;
-}
-
-static void gpmc_cs_set_reserved(int cs, int reserved)
-{
- gpmc_cs_map &= ~(1 << cs);
- gpmc_cs_map |= (reserved ? 1 : 0) << cs;
-}
-
-static bool gpmc_cs_reserved(int cs)
-{
- return gpmc_cs_map & (1 << cs);
-}
-
-static unsigned long gpmc_mem_align(unsigned long size)
-{
- int order;
-
- size = (size - 1) >> (GPMC_CHUNK_SHIFT - 1);
- order = GPMC_CHUNK_SHIFT - 1;
- do {
- size >>= 1;
- order++;
- } while (size);
- size = 1 << order;
- return size;
-}
-
-static int gpmc_cs_insert_mem(int cs, unsigned long base, unsigned long size)
-{
- struct resource *res = &gpmc_cs_mem[cs];
- int r;
-
- size = gpmc_mem_align(size);
- spin_lock(&gpmc_mem_lock);
- res->start = base;
- res->end = base + size - 1;
- r = request_resource(&gpmc_mem_root, res);
- spin_unlock(&gpmc_mem_lock);
-
- return r;
-}
-
-static int gpmc_cs_delete_mem(int cs)
-{
- struct resource *res = &gpmc_cs_mem[cs];
- int r;
-
- spin_lock(&gpmc_mem_lock);
- r = release_resource(res);
- res->start = 0;
- res->end = 0;
- spin_unlock(&gpmc_mem_lock);
-
- return r;
-}
-
-/**
- * gpmc_cs_remap - remaps a chip-select physical base address
- * @cs: chip-select to remap
- * @base: physical base address to re-map chip-select to
- *
- * Re-maps a chip-select to a new physical base address specified by
- * "base". Returns 0 on success and appropriate negative error code
- * on failure.
- */
-static int gpmc_cs_remap(int cs, u32 base)
-{
- int ret;
- u32 old_base, size;
-
- if (cs > gpmc_cs_num) {
- pr_err("%s: requested chip-select is disabled\n", __func__);
- return -ENODEV;
- }
-
- /*
- * Make sure we ignore any device offsets from the GPMC partition
- * allocated for the chip select and that the new base confirms
- * to the GPMC 16MB minimum granularity.
- */
- base &= ~(SZ_16M - 1);
-
- gpmc_cs_get_memconf(cs, &old_base, &size);
- if (base == old_base)
- return 0;
- gpmc_cs_disable_mem(cs);
- ret = gpmc_cs_delete_mem(cs);
- if (ret < 0)
- return ret;
- ret = gpmc_cs_insert_mem(cs, base, size);
- if (ret < 0)
- return ret;
- ret = gpmc_cs_enable_mem(cs, base, size);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
-{
- struct resource *res = &gpmc_cs_mem[cs];
- int r = -1;
-
- if (cs > gpmc_cs_num) {
- pr_err("%s: requested chip-select is disabled\n", __func__);
- return -ENODEV;
- }
- size = gpmc_mem_align(size);
- if (size > (1 << GPMC_SECTION_SHIFT))
- return -ENOMEM;
-
- spin_lock(&gpmc_mem_lock);
- if (gpmc_cs_reserved(cs)) {
- r = -EBUSY;
- goto out;
- }
- if (gpmc_cs_mem_enabled(cs))
- r = adjust_resource(res, res->start & ~(size - 1), size);
- if (r < 0)
- r = allocate_resource(&gpmc_mem_root, res, size, 0, ~0,
- size, NULL, NULL);
- if (r < 0)
- goto out;
-
- r = gpmc_cs_enable_mem(cs, res->start, resource_size(res));
- if (r < 0) {
- release_resource(res);
- goto out;
- }
-
- *base = res->start;
- gpmc_cs_set_reserved(cs, 1);
-out:
- spin_unlock(&gpmc_mem_lock);
- return r;
-}
-EXPORT_SYMBOL(gpmc_cs_request);
-
-void gpmc_cs_free(int cs)
-{
- struct resource *res = &gpmc_cs_mem[cs];
-
- spin_lock(&gpmc_mem_lock);
- if (cs >= gpmc_cs_num || cs < 0 || !gpmc_cs_reserved(cs)) {
- printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs);
- BUG();
- spin_unlock(&gpmc_mem_lock);
- return;
- }
- gpmc_cs_disable_mem(cs);
- if (res->flags)
- release_resource(res);
- gpmc_cs_set_reserved(cs, 0);
- spin_unlock(&gpmc_mem_lock);
-}
-EXPORT_SYMBOL(gpmc_cs_free);
-
-/**
- * gpmc_configure - write request to configure gpmc
- * @cmd: command type
- * @wval: value to write
- * @return status of the operation
- */
-int gpmc_configure(int cmd, int wval)
-{
- u32 regval;
-
- switch (cmd) {
- case GPMC_ENABLE_IRQ:
- gpmc_write_reg(GPMC_IRQENABLE, wval);
- break;
-
- case GPMC_SET_IRQ_STATUS:
- gpmc_write_reg(GPMC_IRQSTATUS, wval);
- break;
-
- case GPMC_CONFIG_WP:
- regval = gpmc_read_reg(GPMC_CONFIG);
- if (wval)
- regval &= ~GPMC_CONFIG_WRITEPROTECT; /* WP is ON */
- else
- regval |= GPMC_CONFIG_WRITEPROTECT; /* WP is OFF */
- gpmc_write_reg(GPMC_CONFIG, regval);
- break;
-
- default:
- pr_err("%s: command not supported\n", __func__);
- return -EINVAL;
- }
-
- return 0;
-}
-EXPORT_SYMBOL(gpmc_configure);
-
-void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
-{
- int i;
-
- reg->gpmc_status = gpmc_base + GPMC_STATUS;
- reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET +
- GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs;
- reg->gpmc_nand_address = gpmc_base + GPMC_CS0_OFFSET +
- GPMC_CS_NAND_ADDRESS + GPMC_CS_SIZE * cs;
- reg->gpmc_nand_data = gpmc_base + GPMC_CS0_OFFSET +
- GPMC_CS_NAND_DATA + GPMC_CS_SIZE * cs;
- reg->gpmc_prefetch_config1 = gpmc_base + GPMC_PREFETCH_CONFIG1;
- reg->gpmc_prefetch_config2 = gpmc_base + GPMC_PREFETCH_CONFIG2;
- reg->gpmc_prefetch_control = gpmc_base + GPMC_PREFETCH_CONTROL;
- reg->gpmc_prefetch_status = gpmc_base + GPMC_PREFETCH_STATUS;
- reg->gpmc_ecc_config = gpmc_base + GPMC_ECC_CONFIG;
- reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL;
- reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG;
- reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT;
-
- for (i = 0; i < GPMC_BCH_NUM_REMAINDER; i++) {
- reg->gpmc_bch_result0[i] = gpmc_base + GPMC_ECC_BCH_RESULT_0 +
- GPMC_BCH_SIZE * i;
- reg->gpmc_bch_result1[i] = gpmc_base + GPMC_ECC_BCH_RESULT_1 +
- GPMC_BCH_SIZE * i;
- reg->gpmc_bch_result2[i] = gpmc_base + GPMC_ECC_BCH_RESULT_2 +
- GPMC_BCH_SIZE * i;
- reg->gpmc_bch_result3[i] = gpmc_base + GPMC_ECC_BCH_RESULT_3 +
- GPMC_BCH_SIZE * i;
- reg->gpmc_bch_result4[i] = gpmc_base + GPMC_ECC_BCH_RESULT_4 +
- i * GPMC_BCH_SIZE;
- reg->gpmc_bch_result5[i] = gpmc_base + GPMC_ECC_BCH_RESULT_5 +
- i * GPMC_BCH_SIZE;
- reg->gpmc_bch_result6[i] = gpmc_base + GPMC_ECC_BCH_RESULT_6 +
- i * GPMC_BCH_SIZE;
- }
-}
-
-int gpmc_get_client_irq(unsigned irq_config)
-{
- int i;
-
- if (hweight32(irq_config) > 1)
- return 0;
-
- for (i = 0; i < GPMC_NR_IRQ; i++)
- if (gpmc_client_irq[i].bitmask & irq_config)
- return gpmc_client_irq[i].irq;
-
- return 0;
-}
-
-static int gpmc_irq_endis(unsigned irq, bool endis)
-{
- int i;
- u32 regval;
-
- for (i = 0; i < GPMC_NR_IRQ; i++)
- if (irq == gpmc_client_irq[i].irq) {
- regval = gpmc_read_reg(GPMC_IRQENABLE);
- if (endis)
- regval |= gpmc_client_irq[i].bitmask;
- else
- regval &= ~gpmc_client_irq[i].bitmask;
- gpmc_write_reg(GPMC_IRQENABLE, regval);
- break;
- }
-
- return 0;
-}
-
-static void gpmc_irq_disable(struct irq_data *p)
-{
- gpmc_irq_endis(p->irq, false);
-}
-
-static void gpmc_irq_enable(struct irq_data *p)
-{
- gpmc_irq_endis(p->irq, true);
-}
-
-static void gpmc_irq_noop(struct irq_data *data) { }
-
-static unsigned int gpmc_irq_noop_ret(struct irq_data *data) { return 0; }
-
-static int gpmc_setup_irq(void)
-{
- int i;
- u32 regval;
-
- if (!gpmc_irq)
- return -EINVAL;
-
- gpmc_irq_start = irq_alloc_descs(-1, 0, GPMC_NR_IRQ, 0);
- if (gpmc_irq_start < 0) {
- pr_err("irq_alloc_descs failed\n");
- return gpmc_irq_start;
- }
-
- gpmc_irq_chip.name = "gpmc";
- gpmc_irq_chip.irq_startup = gpmc_irq_noop_ret;
- gpmc_irq_chip.irq_enable = gpmc_irq_enable;
- gpmc_irq_chip.irq_disable = gpmc_irq_disable;
- gpmc_irq_chip.irq_shutdown = gpmc_irq_noop;
- gpmc_irq_chip.irq_ack = gpmc_irq_noop;
- gpmc_irq_chip.irq_mask = gpmc_irq_noop;
- gpmc_irq_chip.irq_unmask = gpmc_irq_noop;
-
- gpmc_client_irq[0].bitmask = GPMC_IRQ_FIFOEVENTENABLE;
- gpmc_client_irq[1].bitmask = GPMC_IRQ_COUNT_EVENT;
-
- for (i = 0; i < GPMC_NR_IRQ; i++) {
- gpmc_client_irq[i].irq = gpmc_irq_start + i;
- irq_set_chip_and_handler(gpmc_client_irq[i].irq,
- &gpmc_irq_chip, handle_simple_irq);
- set_irq_flags(gpmc_client_irq[i].irq,
- IRQF_VALID | IRQF_NOAUTOEN);
- }
-
- /* Disable interrupts */
- gpmc_write_reg(GPMC_IRQENABLE, 0);
-
- /* clear interrupts */
- regval = gpmc_read_reg(GPMC_IRQSTATUS);
- gpmc_write_reg(GPMC_IRQSTATUS, regval);
-
- return request_irq(gpmc_irq, gpmc_handle_irq, 0, "gpmc", NULL);
-}
-
-static int gpmc_free_irq(void)
-{
- int i;
-
- if (gpmc_irq)
- free_irq(gpmc_irq, NULL);
-
- for (i = 0; i < GPMC_NR_IRQ; i++) {
- irq_set_handler(gpmc_client_irq[i].irq, NULL);
- irq_set_chip(gpmc_client_irq[i].irq, &no_irq_chip);
- irq_modify_status(gpmc_client_irq[i].irq, 0, 0);
- }
-
- irq_free_descs(gpmc_irq_start, GPMC_NR_IRQ);
-
- return 0;
-}
-
-static void gpmc_mem_exit(void)
-{
- int cs;
-
- for (cs = 0; cs < gpmc_cs_num; cs++) {
- if (!gpmc_cs_mem_enabled(cs))
- continue;
- gpmc_cs_delete_mem(cs);
- }
-
-}
-
-static void gpmc_mem_init(void)
-{
- int cs;
-
- /*
- * The first 1MB of GPMC address space is typically mapped to
- * the internal ROM. Never allocate the first page, to
- * facilitate bug detection; even if we didn't boot from ROM.
- */
- gpmc_mem_root.start = SZ_1M;
- gpmc_mem_root.end = GPMC_MEM_END;
-
- /* Reserve all regions that has been set up by bootloader */
- for (cs = 0; cs < gpmc_cs_num; cs++) {
- u32 base, size;
-
- if (!gpmc_cs_mem_enabled(cs))
- continue;
- gpmc_cs_get_memconf(cs, &base, &size);
- if (gpmc_cs_insert_mem(cs, base, size)) {
- pr_warn("%s: disabling cs %d mapped at 0x%x-0x%x\n",
- __func__, cs, base, base + size);
- gpmc_cs_disable_mem(cs);
- }
- }
-}
-
-static u32 gpmc_round_ps_to_sync_clk(u32 time_ps, u32 sync_clk)
-{
- u32 temp;
- int div;
-
- div = gpmc_calc_divider(sync_clk);
- temp = gpmc_ps_to_ticks(time_ps);
- temp = (temp + div - 1) / div;
- return gpmc_ticks_to_ps(temp * div);
-}
-
-/* XXX: can the cycles be avoided ? */
-static int gpmc_calc_sync_read_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_device_timings *dev_t,
- bool mux)
-{
- u32 temp;
-
- /* adv_rd_off */
- temp = dev_t->t_avdp_r;
- /* XXX: mux check required ? */
- if (mux) {
- /* XXX: t_avdp not to be required for sync, only added for tusb
- * this indirectly necessitates requirement of t_avdp_r and
- * t_avdp_w instead of having a single t_avdp
- */
- temp = max_t(u32, temp, gpmc_t->clk_activation + dev_t->t_avdh);
- temp = max_t(u32, gpmc_t->adv_on + gpmc_ticks_to_ps(1), temp);
- }
- gpmc_t->adv_rd_off = gpmc_round_ps_to_ticks(temp);
-
- /* oe_on */
- temp = dev_t->t_oeasu; /* XXX: remove this ? */
- if (mux) {
- temp = max_t(u32, temp, gpmc_t->clk_activation + dev_t->t_ach);
- temp = max_t(u32, temp, gpmc_t->adv_rd_off +
- gpmc_ticks_to_ps(dev_t->cyc_aavdh_oe));
- }
- gpmc_t->oe_on = gpmc_round_ps_to_ticks(temp);
-
- /* access */
- /* XXX: any scope for improvement ?, by combining oe_on
- * and clk_activation, need to check whether
- * access = clk_activation + round to sync clk ?
- */
- temp = max_t(u32, dev_t->t_iaa, dev_t->cyc_iaa * gpmc_t->sync_clk);
- temp += gpmc_t->clk_activation;
- if (dev_t->cyc_oe)
- temp = max_t(u32, temp, gpmc_t->oe_on +
- gpmc_ticks_to_ps(dev_t->cyc_oe));
- gpmc_t->access = gpmc_round_ps_to_ticks(temp);
-
- gpmc_t->oe_off = gpmc_t->access + gpmc_ticks_to_ps(1);
- gpmc_t->cs_rd_off = gpmc_t->oe_off;
-
- /* rd_cycle */
- temp = max_t(u32, dev_t->t_cez_r, dev_t->t_oez);
- temp = gpmc_round_ps_to_sync_clk(temp, gpmc_t->sync_clk) +
- gpmc_t->access;
- /* XXX: barter t_ce_rdyz with t_cez_r ? */
- if (dev_t->t_ce_rdyz)
- temp = max_t(u32, temp, gpmc_t->cs_rd_off + dev_t->t_ce_rdyz);
- gpmc_t->rd_cycle = gpmc_round_ps_to_ticks(temp);
-
- return 0;
-}
-
-static int gpmc_calc_sync_write_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_device_timings *dev_t,
- bool mux)
-{
- u32 temp;
-
- /* adv_wr_off */
- temp = dev_t->t_avdp_w;
- if (mux) {
- temp = max_t(u32, temp,
- gpmc_t->clk_activation + dev_t->t_avdh);
- temp = max_t(u32, gpmc_t->adv_on + gpmc_ticks_to_ps(1), temp);
- }
- gpmc_t->adv_wr_off = gpmc_round_ps_to_ticks(temp);
-
- /* wr_data_mux_bus */
- temp = max_t(u32, dev_t->t_weasu,
- gpmc_t->clk_activation + dev_t->t_rdyo);
- /* XXX: shouldn't mux be kept as a whole for wr_data_mux_bus ?,
- * and in that case remember to handle we_on properly
- */
- if (mux) {
- temp = max_t(u32, temp,
- gpmc_t->adv_wr_off + dev_t->t_aavdh);
- temp = max_t(u32, temp, gpmc_t->adv_wr_off +
- gpmc_ticks_to_ps(dev_t->cyc_aavdh_we));
- }
- gpmc_t->wr_data_mux_bus = gpmc_round_ps_to_ticks(temp);
-
- /* we_on */
- if (gpmc_capability & GPMC_HAS_WR_DATA_MUX_BUS)
- gpmc_t->we_on = gpmc_round_ps_to_ticks(dev_t->t_weasu);
- else
- gpmc_t->we_on = gpmc_t->wr_data_mux_bus;
-
- /* wr_access */
- /* XXX: gpmc_capability check reqd ? , even if not, will not harm */
- gpmc_t->wr_access = gpmc_t->access;
-
- /* we_off */
- temp = gpmc_t->we_on + dev_t->t_wpl;
- temp = max_t(u32, temp,
- gpmc_t->wr_access + gpmc_ticks_to_ps(1));
- temp = max_t(u32, temp,
- gpmc_t->we_on + gpmc_ticks_to_ps(dev_t->cyc_wpl));
- gpmc_t->we_off = gpmc_round_ps_to_ticks(temp);
-
- gpmc_t->cs_wr_off = gpmc_round_ps_to_ticks(gpmc_t->we_off +
- dev_t->t_wph);
-
- /* wr_cycle */
- temp = gpmc_round_ps_to_sync_clk(dev_t->t_cez_w, gpmc_t->sync_clk);
- temp += gpmc_t->wr_access;
- /* XXX: barter t_ce_rdyz with t_cez_w ? */
- if (dev_t->t_ce_rdyz)
- temp = max_t(u32, temp,
- gpmc_t->cs_wr_off + dev_t->t_ce_rdyz);
- gpmc_t->wr_cycle = gpmc_round_ps_to_ticks(temp);
-
- return 0;
-}
-
-static int gpmc_calc_async_read_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_device_timings *dev_t,
- bool mux)
-{
- u32 temp;
-
- /* adv_rd_off */
- temp = dev_t->t_avdp_r;
- if (mux)
- temp = max_t(u32, gpmc_t->adv_on + gpmc_ticks_to_ps(1), temp);
- gpmc_t->adv_rd_off = gpmc_round_ps_to_ticks(temp);
-
- /* oe_on */
- temp = dev_t->t_oeasu;
- if (mux)
- temp = max_t(u32, temp,
- gpmc_t->adv_rd_off + dev_t->t_aavdh);
- gpmc_t->oe_on = gpmc_round_ps_to_ticks(temp);
-
- /* access */
- temp = max_t(u32, dev_t->t_iaa, /* XXX: remove t_iaa in async ? */
- gpmc_t->oe_on + dev_t->t_oe);
- temp = max_t(u32, temp,
- gpmc_t->cs_on + dev_t->t_ce);
- temp = max_t(u32, temp,
- gpmc_t->adv_on + dev_t->t_aa);
- gpmc_t->access = gpmc_round_ps_to_ticks(temp);
-
- gpmc_t->oe_off = gpmc_t->access + gpmc_ticks_to_ps(1);
- gpmc_t->cs_rd_off = gpmc_t->oe_off;
-
- /* rd_cycle */
- temp = max_t(u32, dev_t->t_rd_cycle,
- gpmc_t->cs_rd_off + dev_t->t_cez_r);
- temp = max_t(u32, temp, gpmc_t->oe_off + dev_t->t_oez);
- gpmc_t->rd_cycle = gpmc_round_ps_to_ticks(temp);
-
- return 0;
-}
-
-static int gpmc_calc_async_write_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_device_timings *dev_t,
- bool mux)
-{
- u32 temp;
-
- /* adv_wr_off */
- temp = dev_t->t_avdp_w;
- if (mux)
- temp = max_t(u32, gpmc_t->adv_on + gpmc_ticks_to_ps(1), temp);
- gpmc_t->adv_wr_off = gpmc_round_ps_to_ticks(temp);
-
- /* wr_data_mux_bus */
- temp = dev_t->t_weasu;
- if (mux) {
- temp = max_t(u32, temp, gpmc_t->adv_wr_off + dev_t->t_aavdh);
- temp = max_t(u32, temp, gpmc_t->adv_wr_off +
- gpmc_ticks_to_ps(dev_t->cyc_aavdh_we));
- }
- gpmc_t->wr_data_mux_bus = gpmc_round_ps_to_ticks(temp);
-
- /* we_on */
- if (gpmc_capability & GPMC_HAS_WR_DATA_MUX_BUS)
- gpmc_t->we_on = gpmc_round_ps_to_ticks(dev_t->t_weasu);
- else
- gpmc_t->we_on = gpmc_t->wr_data_mux_bus;
-
- /* we_off */
- temp = gpmc_t->we_on + dev_t->t_wpl;
- gpmc_t->we_off = gpmc_round_ps_to_ticks(temp);
-
- gpmc_t->cs_wr_off = gpmc_round_ps_to_ticks(gpmc_t->we_off +
- dev_t->t_wph);
-
- /* wr_cycle */
- temp = max_t(u32, dev_t->t_wr_cycle,
- gpmc_t->cs_wr_off + dev_t->t_cez_w);
- gpmc_t->wr_cycle = gpmc_round_ps_to_ticks(temp);
-
- return 0;
-}
-
-static int gpmc_calc_sync_common_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_device_timings *dev_t)
-{
- u32 temp;
-
- gpmc_t->sync_clk = gpmc_calc_divider(dev_t->clk) *
- gpmc_get_fclk_period();
-
- gpmc_t->page_burst_access = gpmc_round_ps_to_sync_clk(
- dev_t->t_bacc,
- gpmc_t->sync_clk);
-
- temp = max_t(u32, dev_t->t_ces, dev_t->t_avds);
- gpmc_t->clk_activation = gpmc_round_ps_to_ticks(temp);
-
- if (gpmc_calc_divider(gpmc_t->sync_clk) != 1)
- return 0;
-
- if (dev_t->ce_xdelay)
- gpmc_t->bool_timings.cs_extra_delay = true;
- if (dev_t->avd_xdelay)
- gpmc_t->bool_timings.adv_extra_delay = true;
- if (dev_t->oe_xdelay)
- gpmc_t->bool_timings.oe_extra_delay = true;
- if (dev_t->we_xdelay)
- gpmc_t->bool_timings.we_extra_delay = true;
-
- return 0;
-}
-
-static int gpmc_calc_common_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_device_timings *dev_t,
- bool sync)
-{
- u32 temp;
-
- /* cs_on */
- gpmc_t->cs_on = gpmc_round_ps_to_ticks(dev_t->t_ceasu);
-
- /* adv_on */
- temp = dev_t->t_avdasu;
- if (dev_t->t_ce_avd)
- temp = max_t(u32, temp,
- gpmc_t->cs_on + dev_t->t_ce_avd);
- gpmc_t->adv_on = gpmc_round_ps_to_ticks(temp);
-
- if (sync)
- gpmc_calc_sync_common_timings(gpmc_t, dev_t);
-
- return 0;
-}
-
-/* TODO: remove this function once all peripherals are confirmed to
- * work with generic timing. Simultaneously gpmc_cs_set_timings()
- * has to be modified to handle timings in ps instead of ns
-*/
-static void gpmc_convert_ps_to_ns(struct gpmc_timings *t)
-{
- t->cs_on /= 1000;
- t->cs_rd_off /= 1000;
- t->cs_wr_off /= 1000;
- t->adv_on /= 1000;
- t->adv_rd_off /= 1000;
- t->adv_wr_off /= 1000;
- t->we_on /= 1000;
- t->we_off /= 1000;
- t->oe_on /= 1000;
- t->oe_off /= 1000;
- t->page_burst_access /= 1000;
- t->access /= 1000;
- t->rd_cycle /= 1000;
- t->wr_cycle /= 1000;
- t->bus_turnaround /= 1000;
- t->cycle2cycle_delay /= 1000;
- t->wait_monitoring /= 1000;
- t->clk_activation /= 1000;
- t->wr_access /= 1000;
- t->wr_data_mux_bus /= 1000;
-}
-
-int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_settings *gpmc_s,
- struct gpmc_device_timings *dev_t)
-{
- bool mux = false, sync = false;
-
- if (gpmc_s) {
- mux = gpmc_s->mux_add_data ? true : false;
- sync = (gpmc_s->sync_read || gpmc_s->sync_write);
- }
-
- memset(gpmc_t, 0, sizeof(*gpmc_t));
-
- gpmc_calc_common_timings(gpmc_t, dev_t, sync);
-
- if (gpmc_s && gpmc_s->sync_read)
- gpmc_calc_sync_read_timings(gpmc_t, dev_t, mux);
- else
- gpmc_calc_async_read_timings(gpmc_t, dev_t, mux);
-
- if (gpmc_s && gpmc_s->sync_write)
- gpmc_calc_sync_write_timings(gpmc_t, dev_t, mux);
- else
- gpmc_calc_async_write_timings(gpmc_t, dev_t, mux);
-
- /* TODO: remove, see function definition */
- gpmc_convert_ps_to_ns(gpmc_t);
-
- return 0;
-}
-
-/**
- * gpmc_cs_program_settings - programs non-timing related settings
- * @cs: GPMC chip-select to program
- * @p: pointer to GPMC settings structure
- *
- * Programs non-timing related settings for a GPMC chip-select, such as
- * bus-width, burst configuration, etc. Function should be called once
- * for each chip-select that is being used and must be called before
- * calling gpmc_cs_set_timings() as timing parameters in the CONFIG1
- * register will be initialised to zero by this function. Returns 0 on
- * success and appropriate negative error code on failure.
- */
-int gpmc_cs_program_settings(int cs, struct gpmc_settings *p)
-{
- u32 config1;
-
- if ((!p->device_width) || (p->device_width > GPMC_DEVWIDTH_16BIT)) {
- pr_err("%s: invalid width %d!", __func__, p->device_width);
- return -EINVAL;
- }
-
- /* Address-data multiplexing not supported for NAND devices */
- if (p->device_nand && p->mux_add_data) {
- pr_err("%s: invalid configuration!\n", __func__);
- return -EINVAL;
- }
-
- if ((p->mux_add_data > GPMC_MUX_AD) ||
- ((p->mux_add_data == GPMC_MUX_AAD) &&
- !(gpmc_capability & GPMC_HAS_MUX_AAD))) {
- pr_err("%s: invalid multiplex configuration!\n", __func__);
- return -EINVAL;
- }
-
- /* Page/burst mode supports lengths of 4, 8 and 16 bytes */
- if (p->burst_read || p->burst_write) {
- switch (p->burst_len) {
- case GPMC_BURST_4:
- case GPMC_BURST_8:
- case GPMC_BURST_16:
- break;
- default:
- pr_err("%s: invalid page/burst-length (%d)\n",
- __func__, p->burst_len);
- return -EINVAL;
- }
- }
-
- if (p->wait_pin > gpmc_nr_waitpins) {
- pr_err("%s: invalid wait-pin (%d)\n", __func__, p->wait_pin);
- return -EINVAL;
- }
-
- config1 = GPMC_CONFIG1_DEVICESIZE((p->device_width - 1));
-
- if (p->sync_read)
- config1 |= GPMC_CONFIG1_READTYPE_SYNC;
- if (p->sync_write)
- config1 |= GPMC_CONFIG1_WRITETYPE_SYNC;
- if (p->wait_on_read)
- config1 |= GPMC_CONFIG1_WAIT_READ_MON;
- if (p->wait_on_write)
- config1 |= GPMC_CONFIG1_WAIT_WRITE_MON;
- if (p->wait_on_read || p->wait_on_write)
- config1 |= GPMC_CONFIG1_WAIT_PIN_SEL(p->wait_pin);
- if (p->device_nand)
- config1 |= GPMC_CONFIG1_DEVICETYPE(GPMC_DEVICETYPE_NAND);
- if (p->mux_add_data)
- config1 |= GPMC_CONFIG1_MUXTYPE(p->mux_add_data);
- if (p->burst_read)
- config1 |= GPMC_CONFIG1_READMULTIPLE_SUPP;
- if (p->burst_write)
- config1 |= GPMC_CONFIG1_WRITEMULTIPLE_SUPP;
- if (p->burst_read || p->burst_write) {
- config1 |= GPMC_CONFIG1_PAGE_LEN(p->burst_len >> 3);
- config1 |= p->burst_wrap ? GPMC_CONFIG1_WRAPBURST_SUPP : 0;
- }
-
- gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, config1);
-
- return 0;
-}
-
-#ifdef CONFIG_OF
-static const struct of_device_id gpmc_dt_ids[] = {
- { .compatible = "ti,omap2420-gpmc" },
- { .compatible = "ti,omap2430-gpmc" },
- { .compatible = "ti,omap3430-gpmc" }, /* omap3430 & omap3630 */
- { .compatible = "ti,omap4430-gpmc" }, /* omap4430 & omap4460 & omap543x */
- { .compatible = "ti,am3352-gpmc" }, /* am335x devices */
- { }
-};
-MODULE_DEVICE_TABLE(of, gpmc_dt_ids);
-
-/**
- * gpmc_read_settings_dt - read gpmc settings from device-tree
- * @np: pointer to device-tree node for a gpmc child device
- * @p: pointer to gpmc settings structure
- *
- * Reads the GPMC settings for a GPMC child device from device-tree and
- * stores them in the GPMC settings structure passed. The GPMC settings
- * structure is initialised to zero by this function and so any
- * previously stored settings will be cleared.
- */
-void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p)
-{
- memset(p, 0, sizeof(struct gpmc_settings));
-
- p->sync_read = of_property_read_bool(np, "gpmc,sync-read");
- p->sync_write = of_property_read_bool(np, "gpmc,sync-write");
- of_property_read_u32(np, "gpmc,device-width", &p->device_width);
- of_property_read_u32(np, "gpmc,mux-add-data", &p->mux_add_data);
-
- if (!of_property_read_u32(np, "gpmc,burst-length", &p->burst_len)) {
- p->burst_wrap = of_property_read_bool(np, "gpmc,burst-wrap");
- p->burst_read = of_property_read_bool(np, "gpmc,burst-read");
- p->burst_write = of_property_read_bool(np, "gpmc,burst-write");
- if (!p->burst_read && !p->burst_write)
- pr_warn("%s: page/burst-length set but not used!\n",
- __func__);
- }
-
- if (!of_property_read_u32(np, "gpmc,wait-pin", &p->wait_pin)) {
- p->wait_on_read = of_property_read_bool(np,
- "gpmc,wait-on-read");
- p->wait_on_write = of_property_read_bool(np,
- "gpmc,wait-on-write");
- if (!p->wait_on_read && !p->wait_on_write)
- pr_debug("%s: rd/wr wait monitoring not enabled!\n",
- __func__);
- }
-}
-
-static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
- struct gpmc_timings *gpmc_t)
-{
- struct gpmc_bool_timings *p;
-
- if (!np || !gpmc_t)
- return;
-
- memset(gpmc_t, 0, sizeof(*gpmc_t));
-
- /* minimum clock period for syncronous mode */
- of_property_read_u32(np, "gpmc,sync-clk-ps", &gpmc_t->sync_clk);
-
- /* chip select timtings */
- of_property_read_u32(np, "gpmc,cs-on-ns", &gpmc_t->cs_on);
- of_property_read_u32(np, "gpmc,cs-rd-off-ns", &gpmc_t->cs_rd_off);
- of_property_read_u32(np, "gpmc,cs-wr-off-ns", &gpmc_t->cs_wr_off);
-
- /* ADV signal timings */
- of_property_read_u32(np, "gpmc,adv-on-ns", &gpmc_t->adv_on);
- of_property_read_u32(np, "gpmc,adv-rd-off-ns", &gpmc_t->adv_rd_off);
- of_property_read_u32(np, "gpmc,adv-wr-off-ns", &gpmc_t->adv_wr_off);
-
- /* WE signal timings */
- of_property_read_u32(np, "gpmc,we-on-ns", &gpmc_t->we_on);
- of_property_read_u32(np, "gpmc,we-off-ns", &gpmc_t->we_off);
-
- /* OE signal timings */
- of_property_read_u32(np, "gpmc,oe-on-ns", &gpmc_t->oe_on);
- of_property_read_u32(np, "gpmc,oe-off-ns", &gpmc_t->oe_off);
-
- /* access and cycle timings */
- of_property_read_u32(np, "gpmc,page-burst-access-ns",
- &gpmc_t->page_burst_access);
- of_property_read_u32(np, "gpmc,access-ns", &gpmc_t->access);
- of_property_read_u32(np, "gpmc,rd-cycle-ns", &gpmc_t->rd_cycle);
- of_property_read_u32(np, "gpmc,wr-cycle-ns", &gpmc_t->wr_cycle);
- of_property_read_u32(np, "gpmc,bus-turnaround-ns",
- &gpmc_t->bus_turnaround);
- of_property_read_u32(np, "gpmc,cycle2cycle-delay-ns",
- &gpmc_t->cycle2cycle_delay);
- of_property_read_u32(np, "gpmc,wait-monitoring-ns",
- &gpmc_t->wait_monitoring);
- of_property_read_u32(np, "gpmc,clk-activation-ns",
- &gpmc_t->clk_activation);
-
- /* only applicable to OMAP3+ */
- of_property_read_u32(np, "gpmc,wr-access-ns", &gpmc_t->wr_access);
- of_property_read_u32(np, "gpmc,wr-data-mux-bus-ns",
- &gpmc_t->wr_data_mux_bus);
-
- /* bool timing parameters */
- p = &gpmc_t->bool_timings;
-
- p->cycle2cyclediffcsen =
- of_property_read_bool(np, "gpmc,cycle2cycle-diffcsen");
- p->cycle2cyclesamecsen =
- of_property_read_bool(np, "gpmc,cycle2cycle-samecsen");
- p->we_extra_delay = of_property_read_bool(np, "gpmc,we-extra-delay");
- p->oe_extra_delay = of_property_read_bool(np, "gpmc,oe-extra-delay");
- p->adv_extra_delay = of_property_read_bool(np, "gpmc,adv-extra-delay");
- p->cs_extra_delay = of_property_read_bool(np, "gpmc,cs-extra-delay");
- p->time_para_granularity =
- of_property_read_bool(np, "gpmc,time-para-granularity");
-}
-
-#if IS_ENABLED(CONFIG_MTD_NAND)
-
-static const char * const nand_xfer_types[] = {
- [NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled",
- [NAND_OMAP_POLLED] = "polled",
- [NAND_OMAP_PREFETCH_DMA] = "prefetch-dma",
- [NAND_OMAP_PREFETCH_IRQ] = "prefetch-irq",
-};
-
-static int gpmc_probe_nand_child(struct platform_device *pdev,
- struct device_node *child)
-{
- u32 val;
- const char *s;
- struct gpmc_timings gpmc_t;
- struct omap_nand_platform_data *gpmc_nand_data;
-
- if (of_property_read_u32(child, "reg", &val) < 0) {
- dev_err(&pdev->dev, "%s has no 'reg' property\n",
- child->full_name);
- return -ENODEV;
- }
-
- gpmc_nand_data = devm_kzalloc(&pdev->dev, sizeof(*gpmc_nand_data),
- GFP_KERNEL);
- if (!gpmc_nand_data)
- return -ENOMEM;
-
- gpmc_nand_data->cs = val;
- gpmc_nand_data->of_node = child;
-
- /* Detect availability of ELM module */
- gpmc_nand_data->elm_of_node = of_parse_phandle(child, "ti,elm-id", 0);
- if (gpmc_nand_data->elm_of_node == NULL)
- gpmc_nand_data->elm_of_node =
- of_parse_phandle(child, "elm_id", 0);
- if (gpmc_nand_data->elm_of_node == NULL)
- pr_warn("%s: ti,elm-id property not found\n", __func__);
-
- /* select ecc-scheme for NAND */
- if (of_property_read_string(child, "ti,nand-ecc-opt", &s)) {
- pr_err("%s: ti,nand-ecc-opt not found\n", __func__);
- return -ENODEV;
- }
-
- if (!strcmp(s, "sw"))
- gpmc_nand_data->ecc_opt = OMAP_ECC_HAM1_CODE_SW;
- else if (!strcmp(s, "ham1") ||
- !strcmp(s, "hw") || !strcmp(s, "hw-romcode"))
- gpmc_nand_data->ecc_opt =
- OMAP_ECC_HAM1_CODE_HW;
- else if (!strcmp(s, "bch4"))
- if (gpmc_nand_data->elm_of_node)
- gpmc_nand_data->ecc_opt =
- OMAP_ECC_BCH4_CODE_HW;
- else
- gpmc_nand_data->ecc_opt =
- OMAP_ECC_BCH4_CODE_HW_DETECTION_SW;
- else if (!strcmp(s, "bch8"))
- if (gpmc_nand_data->elm_of_node)
- gpmc_nand_data->ecc_opt =
- OMAP_ECC_BCH8_CODE_HW;
- else
- gpmc_nand_data->ecc_opt =
- OMAP_ECC_BCH8_CODE_HW_DETECTION_SW;
- else if (!strcmp(s, "bch16"))
- if (gpmc_nand_data->elm_of_node)
- gpmc_nand_data->ecc_opt =
- OMAP_ECC_BCH16_CODE_HW;
- else
- pr_err("%s: BCH16 requires ELM support\n", __func__);
- else
- pr_err("%s: ti,nand-ecc-opt invalid value\n", __func__);
-
- /* select data transfer mode for NAND controller */
- if (!of_property_read_string(child, "ti,nand-xfer-type", &s))
- for (val = 0; val < ARRAY_SIZE(nand_xfer_types); val++)
- if (!strcasecmp(s, nand_xfer_types[val])) {
- gpmc_nand_data->xfer_type = val;
- break;
- }
-
- gpmc_nand_data->flash_bbt = of_get_nand_on_flash_bbt(child);
-
- val = of_get_nand_bus_width(child);
- if (val == 16)
- gpmc_nand_data->devsize = NAND_BUSWIDTH_16;
-
- gpmc_read_timings_dt(child, &gpmc_t);
- gpmc_nand_init(gpmc_nand_data, &gpmc_t);
-
- return 0;
-}
-#else
-static int gpmc_probe_nand_child(struct platform_device *pdev,
- struct device_node *child)
-{
- return 0;
-}
-#endif
-
-#if IS_ENABLED(CONFIG_MTD_ONENAND)
-static int gpmc_probe_onenand_child(struct platform_device *pdev,
- struct device_node *child)
-{
- u32 val;
- struct omap_onenand_platform_data *gpmc_onenand_data;
-
- if (of_property_read_u32(child, "reg", &val) < 0) {
- dev_err(&pdev->dev, "%s has no 'reg' property\n",
- child->full_name);
- return -ENODEV;
- }
-
- gpmc_onenand_data = devm_kzalloc(&pdev->dev, sizeof(*gpmc_onenand_data),
- GFP_KERNEL);
- if (!gpmc_onenand_data)
- return -ENOMEM;
-
- gpmc_onenand_data->cs = val;
- gpmc_onenand_data->of_node = child;
- gpmc_onenand_data->dma_channel = -1;
-
- if (!of_property_read_u32(child, "dma-channel", &val))
- gpmc_onenand_data->dma_channel = val;
-
- gpmc_onenand_init(gpmc_onenand_data);
-
- return 0;
-}
-#else
-static int gpmc_probe_onenand_child(struct platform_device *pdev,
- struct device_node *child)
-{
- return 0;
-}
-#endif
-
-/**
- * gpmc_probe_generic_child - configures the gpmc for a child device
- * @pdev: pointer to gpmc platform device
- * @child: pointer to device-tree node for child device
- *
- * Allocates and configures a GPMC chip-select for a child device.
- * Returns 0 on success and appropriate negative error code on failure.
- */
-static int gpmc_probe_generic_child(struct platform_device *pdev,
- struct device_node *child)
-{
- struct gpmc_settings gpmc_s;
- struct gpmc_timings gpmc_t;
- struct resource res;
- unsigned long base;
- int ret, cs;
-
- if (of_property_read_u32(child, "reg", &cs) < 0) {
- dev_err(&pdev->dev, "%s has no 'reg' property\n",
- child->full_name);
- return -ENODEV;
- }
-
- if (of_address_to_resource(child, 0, &res) < 0) {
- dev_err(&pdev->dev, "%s has malformed 'reg' property\n",
- child->full_name);
- return -ENODEV;
- }
-
- ret = gpmc_cs_request(cs, resource_size(&res), &base);
- if (ret < 0) {
- dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs);
- return ret;
- }
-
- /*
- * For some GPMC devices we still need to rely on the bootloader
- * timings because the devices can be connected via FPGA. So far
- * the list is smc91x on the omap2 SDP boards, and 8250 on zooms.
- * REVISIT: Add timing support from slls644g.pdf and from the
- * lan91c96 manual.
- */
- if (of_device_is_compatible(child, "ns16550a") ||
- of_device_is_compatible(child, "smsc,lan91c94") ||
- of_device_is_compatible(child, "smsc,lan91c111")) {
- dev_warn(&pdev->dev,
- "%s using bootloader timings on CS%d\n",
- child->name, cs);
- goto no_timings;
- }
-
- /*
- * FIXME: gpmc_cs_request() will map the CS to an arbitary
- * location in the gpmc address space. When booting with
- * device-tree we want the NOR flash to be mapped to the
- * location specified in the device-tree blob. So remap the
- * CS to this location. Once DT migration is complete should
- * just make gpmc_cs_request() map a specific address.
- */
- ret = gpmc_cs_remap(cs, res.start);
- if (ret < 0) {
- dev_err(&pdev->dev, "cannot remap GPMC CS %d to %pa\n",
- cs, &res.start);
- goto err;
- }
-
- gpmc_read_settings_dt(child, &gpmc_s);
-
- ret = of_property_read_u32(child, "bank-width", &gpmc_s.device_width);
- if (ret < 0)
- goto err;
-
- ret = gpmc_cs_program_settings(cs, &gpmc_s);
- if (ret < 0)
- goto err;
-
- gpmc_read_timings_dt(child, &gpmc_t);
- gpmc_cs_set_timings(cs, &gpmc_t);
-
-no_timings:
- if (of_platform_device_create(child, NULL, &pdev->dev))
- return 0;
-
- dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name);
- ret = -ENODEV;
-
-err:
- gpmc_cs_free(cs);
-
- return ret;
-}
-
-static int gpmc_probe_dt(struct platform_device *pdev)
-{
- int ret;
- struct device_node *child;
- const struct of_device_id *of_id =
- of_match_device(gpmc_dt_ids, &pdev->dev);
-
- if (!of_id)
- return 0;
-
- ret = of_property_read_u32(pdev->dev.of_node, "gpmc,num-cs",
- &gpmc_cs_num);
- if (ret < 0) {
- pr_err("%s: number of chip-selects not defined\n", __func__);
- return ret;
- } else if (gpmc_cs_num < 1) {
- pr_err("%s: all chip-selects are disabled\n", __func__);
- return -EINVAL;
- } else if (gpmc_cs_num > GPMC_CS_NUM) {
- pr_err("%s: number of supported chip-selects cannot be > %d\n",
- __func__, GPMC_CS_NUM);
- return -EINVAL;
- }
-
- ret = of_property_read_u32(pdev->dev.of_node, "gpmc,num-waitpins",
- &gpmc_nr_waitpins);
- if (ret < 0) {
- pr_err("%s: number of wait pins not found!\n", __func__);
- return ret;
- }
-
- for_each_available_child_of_node(pdev->dev.of_node, child) {
-
- if (!child->name)
- continue;
-
- if (of_node_cmp(child->name, "nand") == 0)
- ret = gpmc_probe_nand_child(pdev, child);
- else if (of_node_cmp(child->name, "onenand") == 0)
- ret = gpmc_probe_onenand_child(pdev, child);
- else if (of_node_cmp(child->name, "ethernet") == 0 ||
- of_node_cmp(child->name, "nor") == 0 ||
- of_node_cmp(child->name, "uart") == 0)
- ret = gpmc_probe_generic_child(pdev, child);
-
- if (WARN(ret < 0, "%s: probing gpmc child %s failed\n",
- __func__, child->full_name))
- of_node_put(child);
- }
-
- return 0;
-}
-#else
-static int gpmc_probe_dt(struct platform_device *pdev)
-{
- return 0;
-}
-#endif
-
-static int gpmc_probe(struct platform_device *pdev)
-{
- int rc;
- u32 l;
- struct resource *res;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (res == NULL)
- return -ENOENT;
-
- phys_base = res->start;
- mem_size = resource_size(res);
-
- gpmc_base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(gpmc_base))
- return PTR_ERR(gpmc_base);
-
- res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (res == NULL)
- dev_warn(&pdev->dev, "Failed to get resource: irq\n");
- else
- gpmc_irq = res->start;
-
- gpmc_l3_clk = clk_get(&pdev->dev, "fck");
- if (IS_ERR(gpmc_l3_clk)) {
- dev_err(&pdev->dev, "error: clk_get\n");
- gpmc_irq = 0;
- return PTR_ERR(gpmc_l3_clk);
- }
-
- pm_runtime_enable(&pdev->dev);
- pm_runtime_get_sync(&pdev->dev);
-
- gpmc_dev = &pdev->dev;
-
- l = gpmc_read_reg(GPMC_REVISION);
-
- /*
- * FIXME: Once device-tree migration is complete the below flags
- * should be populated based upon the device-tree compatible
- * string. For now just use the IP revision. OMAP3+ devices have
- * the wr_access and wr_data_mux_bus register fields. OMAP4+
- * devices support the addr-addr-data multiplex protocol.
- *
- * GPMC IP revisions:
- * - OMAP24xx = 2.0
- * - OMAP3xxx = 5.0
- * - OMAP44xx/54xx/AM335x = 6.0
- */
- if (GPMC_REVISION_MAJOR(l) > 0x4)
- gpmc_capability = GPMC_HAS_WR_ACCESS | GPMC_HAS_WR_DATA_MUX_BUS;
- if (GPMC_REVISION_MAJOR(l) > 0x5)
- gpmc_capability |= GPMC_HAS_MUX_AAD;
- dev_info(gpmc_dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l),
- GPMC_REVISION_MINOR(l));
-
- gpmc_mem_init();
-
- if (gpmc_setup_irq() < 0)
- dev_warn(gpmc_dev, "gpmc_setup_irq failed\n");
-
- /* Now the GPMC is initialised, unreserve the chip-selects */
- gpmc_cs_map = 0;
-
- if (!pdev->dev.of_node) {
- gpmc_cs_num = GPMC_CS_NUM;
- gpmc_nr_waitpins = GPMC_NR_WAITPINS;
- }
-
- rc = gpmc_probe_dt(pdev);
- if (rc < 0) {
- pm_runtime_put_sync(&pdev->dev);
- clk_put(gpmc_l3_clk);
- dev_err(gpmc_dev, "failed to probe DT parameters\n");
- return rc;
- }
-
- return 0;
-}
-
-static int gpmc_remove(struct platform_device *pdev)
-{
- gpmc_free_irq();
- gpmc_mem_exit();
- pm_runtime_put_sync(&pdev->dev);
- pm_runtime_disable(&pdev->dev);
- gpmc_dev = NULL;
- return 0;
-}
-
-#ifdef CONFIG_PM_SLEEP
-static int gpmc_suspend(struct device *dev)
-{
- omap3_gpmc_save_context();
- pm_runtime_put_sync(dev);
- return 0;
-}
-
-static int gpmc_resume(struct device *dev)
-{
- pm_runtime_get_sync(dev);
- omap3_gpmc_restore_context();
- return 0;
-}
-#endif
-
-static SIMPLE_DEV_PM_OPS(gpmc_pm_ops, gpmc_suspend, gpmc_resume);
-
-static struct platform_driver gpmc_driver = {
- .probe = gpmc_probe,
- .remove = gpmc_remove,
- .driver = {
- .name = DEVICE_NAME,
- .owner = THIS_MODULE,
- .of_match_table = of_match_ptr(gpmc_dt_ids),
- .pm = &gpmc_pm_ops,
- },
-};
-
-static __init int gpmc_init(void)
-{
- return platform_driver_register(&gpmc_driver);
-}
-
-static __exit void gpmc_exit(void)
-{
- platform_driver_unregister(&gpmc_driver);
-
-}
-
-omap_postcore_initcall(gpmc_init);
-module_exit(gpmc_exit);
-
-static int __init omap_gpmc_init(void)
-{
- struct omap_hwmod *oh;
- struct platform_device *pdev;
- char *oh_name = "gpmc";
-
- /*
- * if the board boots up with a populated DT, do not
- * manually add the device from this initcall
- */
- if (of_have_populated_dt())
- return -ENODEV;
-
- oh = omap_hwmod_lookup(oh_name);
- if (!oh) {
- pr_err("Could not look up %s\n", oh_name);
- return -ENODEV;
- }
-
- pdev = omap_device_build(DEVICE_NAME, -1, oh, NULL, 0);
- WARN(IS_ERR(pdev), "could not build omap_device for %s\n", oh_name);
-
- return PTR_RET(pdev);
-}
-omap_postcore_initcall(omap_gpmc_init);
-
-static irqreturn_t gpmc_handle_irq(int irq, void *dev)
-{
- int i;
- u32 regval;
-
- regval = gpmc_read_reg(GPMC_IRQSTATUS);
-
- if (!regval)
- return IRQ_NONE;
-
- for (i = 0; i < GPMC_NR_IRQ; i++)
- if (regval & gpmc_client_irq[i].bitmask)
- generic_handle_irq(gpmc_client_irq[i].irq);
-
- gpmc_write_reg(GPMC_IRQSTATUS, regval);
-
- return IRQ_HANDLED;
-}
-
-static struct omap3_gpmc_regs gpmc_context;
-
-void omap3_gpmc_save_context(void)
-{
- int i;
-
- gpmc_context.sysconfig = gpmc_read_reg(GPMC_SYSCONFIG);
- gpmc_context.irqenable = gpmc_read_reg(GPMC_IRQENABLE);
- gpmc_context.timeout_ctrl = gpmc_read_reg(GPMC_TIMEOUT_CONTROL);
- gpmc_context.config = gpmc_read_reg(GPMC_CONFIG);
- gpmc_context.prefetch_config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
- gpmc_context.prefetch_config2 = gpmc_read_reg(GPMC_PREFETCH_CONFIG2);
- gpmc_context.prefetch_control = gpmc_read_reg(GPMC_PREFETCH_CONTROL);
- for (i = 0; i < gpmc_cs_num; i++) {
- gpmc_context.cs_context[i].is_valid = gpmc_cs_mem_enabled(i);
- if (gpmc_context.cs_context[i].is_valid) {
- gpmc_context.cs_context[i].config1 =
- gpmc_cs_read_reg(i, GPMC_CS_CONFIG1);
- gpmc_context.cs_context[i].config2 =
- gpmc_cs_read_reg(i, GPMC_CS_CONFIG2);
- gpmc_context.cs_context[i].config3 =
- gpmc_cs_read_reg(i, GPMC_CS_CONFIG3);
- gpmc_context.cs_context[i].config4 =
- gpmc_cs_read_reg(i, GPMC_CS_CONFIG4);
- gpmc_context.cs_context[i].config5 =
- gpmc_cs_read_reg(i, GPMC_CS_CONFIG5);
- gpmc_context.cs_context[i].config6 =
- gpmc_cs_read_reg(i, GPMC_CS_CONFIG6);
- gpmc_context.cs_context[i].config7 =
- gpmc_cs_read_reg(i, GPMC_CS_CONFIG7);
- }
- }
-}
-
-void omap3_gpmc_restore_context(void)
-{
- int i;
-
- gpmc_write_reg(GPMC_SYSCONFIG, gpmc_context.sysconfig);
- gpmc_write_reg(GPMC_IRQENABLE, gpmc_context.irqenable);
- gpmc_write_reg(GPMC_TIMEOUT_CONTROL, gpmc_context.timeout_ctrl);
- gpmc_write_reg(GPMC_CONFIG, gpmc_context.config);
- gpmc_write_reg(GPMC_PREFETCH_CONFIG1, gpmc_context.prefetch_config1);
- gpmc_write_reg(GPMC_PREFETCH_CONFIG2, gpmc_context.prefetch_config2);
- gpmc_write_reg(GPMC_PREFETCH_CONTROL, gpmc_context.prefetch_control);
- for (i = 0; i < gpmc_cs_num; i++) {
- if (gpmc_context.cs_context[i].is_valid) {
- gpmc_cs_write_reg(i, GPMC_CS_CONFIG1,
- gpmc_context.cs_context[i].config1);
- gpmc_cs_write_reg(i, GPMC_CS_CONFIG2,
- gpmc_context.cs_context[i].config2);
- gpmc_cs_write_reg(i, GPMC_CS_CONFIG3,
- gpmc_context.cs_context[i].config3);
- gpmc_cs_write_reg(i, GPMC_CS_CONFIG4,
- gpmc_context.cs_context[i].config4);
- gpmc_cs_write_reg(i, GPMC_CS_CONFIG5,
- gpmc_context.cs_context[i].config5);
- gpmc_cs_write_reg(i, GPMC_CS_CONFIG6,
- gpmc_context.cs_context[i].config6);
- gpmc_cs_write_reg(i, GPMC_CS_CONFIG7,
- gpmc_context.cs_context[i].config7);
- }
- }
-}
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
+ *
+ * Do not include this file in any new code, this will get removed
+ * once omap3 boots in device tree only mode.
+ *
*/
-
-#ifndef __OMAP2_GPMC_H
-#define __OMAP2_GPMC_H
-
-#include <linux/platform_data/mtd-nand-omap2.h>
-
-/* Maximum Number of Chip Selects */
-#define GPMC_CS_NUM 8
-
-#define GPMC_CS_CONFIG1 0x00
-#define GPMC_CS_CONFIG2 0x04
-#define GPMC_CS_CONFIG3 0x08
-#define GPMC_CS_CONFIG4 0x0c
-#define GPMC_CS_CONFIG5 0x10
-#define GPMC_CS_CONFIG6 0x14
-#define GPMC_CS_CONFIG7 0x18
-#define GPMC_CS_NAND_COMMAND 0x1c
-#define GPMC_CS_NAND_ADDRESS 0x20
-#define GPMC_CS_NAND_DATA 0x24
-
-/* Control Commands */
-#define GPMC_CONFIG_RDY_BSY 0x00000001
-#define GPMC_CONFIG_DEV_SIZE 0x00000002
-#define GPMC_CONFIG_DEV_TYPE 0x00000003
-#define GPMC_SET_IRQ_STATUS 0x00000004
-#define GPMC_CONFIG_WP 0x00000005
-
-#define GPMC_ENABLE_IRQ 0x0000000d
-
-/* ECC commands */
-#define GPMC_ECC_READ 0 /* Reset Hardware ECC for read */
-#define GPMC_ECC_WRITE 1 /* Reset Hardware ECC for write */
-#define GPMC_ECC_READSYN 2 /* Reset before syndrom is read back */
-
-#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31)
-#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30)
-#define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29)
-#define GPMC_CONFIG1_READTYPE_SYNC (1 << 29)
-#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28)
-#define GPMC_CONFIG1_WRITETYPE_ASYNC (0 << 27)
-#define GPMC_CONFIG1_WRITETYPE_SYNC (1 << 27)
-#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25)
-#define GPMC_CONFIG1_PAGE_LEN(val) ((val & 3) << 23)
-#define GPMC_CONFIG1_WAIT_READ_MON (1 << 22)
-#define GPMC_CONFIG1_WAIT_WRITE_MON (1 << 21)
-#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18)
-#define GPMC_CONFIG1_WAIT_PIN_SEL(val) ((val & 3) << 16)
-#define GPMC_CONFIG1_DEVICESIZE(val) ((val & 3) << 12)
-#define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1)
-#define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10)
-#define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0)
-#define GPMC_CONFIG1_MUXTYPE(val) ((val & 3) << 8)
-#define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4)
-#define GPMC_CONFIG1_FCLK_DIV(val) (val & 3)
-#define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1))
-#define GPMC_CONFIG1_FCLK_DIV3 (GPMC_CONFIG1_FCLK_DIV(2))
-#define GPMC_CONFIG1_FCLK_DIV4 (GPMC_CONFIG1_FCLK_DIV(3))
-#define GPMC_CONFIG7_CSVALID (1 << 6)
-
-#define GPMC_DEVICETYPE_NOR 0
-#define GPMC_DEVICETYPE_NAND 2
-#define GPMC_CONFIG_WRITEPROTECT 0x00000010
-#define WR_RD_PIN_MONITORING 0x00600000
-#define GPMC_IRQ_FIFOEVENTENABLE 0x01
-#define GPMC_IRQ_COUNT_EVENT 0x02
-
-#define GPMC_BURST_4 4 /* 4 word burst */
-#define GPMC_BURST_8 8 /* 8 word burst */
-#define GPMC_BURST_16 16 /* 16 word burst */
-#define GPMC_DEVWIDTH_8BIT 1 /* 8-bit device width */
-#define GPMC_DEVWIDTH_16BIT 2 /* 16-bit device width */
-#define GPMC_MUX_AAD 1 /* Addr-Addr-Data multiplex */
-#define GPMC_MUX_AD 2 /* Addr-Data multiplex */
-
-/* bool type time settings */
-struct gpmc_bool_timings {
- bool cycle2cyclediffcsen;
- bool cycle2cyclesamecsen;
- bool we_extra_delay;
- bool oe_extra_delay;
- bool adv_extra_delay;
- bool cs_extra_delay;
- bool time_para_granularity;
-};
-
-/*
- * Note that all values in this struct are in nanoseconds except sync_clk
- * (which is in picoseconds), while the register values are in gpmc_fck cycles.
- */
-struct gpmc_timings {
- /* Minimum clock period for synchronous mode (in picoseconds) */
- u32 sync_clk;
-
- /* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
- u32 cs_on; /* Assertion time */
- u32 cs_rd_off; /* Read deassertion time */
- u32 cs_wr_off; /* Write deassertion time */
-
- /* ADV signal timings corresponding to GPMC_CONFIG3 */
- u32 adv_on; /* Assertion time */
- u32 adv_rd_off; /* Read deassertion time */
- u32 adv_wr_off; /* Write deassertion time */
-
- /* WE signals timings corresponding to GPMC_CONFIG4 */
- u32 we_on; /* WE assertion time */
- u32 we_off; /* WE deassertion time */
-
- /* OE signals timings corresponding to GPMC_CONFIG4 */
- u32 oe_on; /* OE assertion time */
- u32 oe_off; /* OE deassertion time */
-
- /* Access time and cycle time timings corresponding to GPMC_CONFIG5 */
- u32 page_burst_access; /* Multiple access word delay */
- u32 access; /* Start-cycle to first data valid delay */
- u32 rd_cycle; /* Total read cycle time */
- u32 wr_cycle; /* Total write cycle time */
-
- u32 bus_turnaround;
- u32 cycle2cycle_delay;
-
- u32 wait_monitoring;
- u32 clk_activation;
-
- /* The following are only on OMAP3430 */
- u32 wr_access; /* WRACCESSTIME */
- u32 wr_data_mux_bus; /* WRDATAONADMUXBUS */
-
- struct gpmc_bool_timings bool_timings;
-};
-
-/* Device timings in picoseconds */
-struct gpmc_device_timings {
- u32 t_ceasu; /* address setup to CS valid */
- u32 t_avdasu; /* address setup to ADV valid */
- /* XXX: try to combine t_avdp_r & t_avdp_w. Issue is
- * of tusb using these timings even for sync whilst
- * ideally for adv_rd/(wr)_off it should have considered
- * t_avdh instead. This indirectly necessitates r/w
- * variations of t_avdp as it is possible to have one
- * sync & other async
- */
- u32 t_avdp_r; /* ADV low time (what about t_cer ?) */
- u32 t_avdp_w;
- u32 t_aavdh; /* address hold time */
- u32 t_oeasu; /* address setup to OE valid */
- u32 t_aa; /* access time from ADV assertion */
- u32 t_iaa; /* initial access time */
- u32 t_oe; /* access time from OE assertion */
- u32 t_ce; /* access time from CS asertion */
- u32 t_rd_cycle; /* read cycle time */
- u32 t_cez_r; /* read CS deassertion to high Z */
- u32 t_cez_w; /* write CS deassertion to high Z */
- u32 t_oez; /* OE deassertion to high Z */
- u32 t_weasu; /* address setup to WE valid */
- u32 t_wpl; /* write assertion time */
- u32 t_wph; /* write deassertion time */
- u32 t_wr_cycle; /* write cycle time */
-
- u32 clk;
- u32 t_bacc; /* burst access valid clock to output delay */
- u32 t_ces; /* CS setup time to clk */
- u32 t_avds; /* ADV setup time to clk */
- u32 t_avdh; /* ADV hold time from clk */
- u32 t_ach; /* address hold time from clk */
- u32 t_rdyo; /* clk to ready valid */
-
- u32 t_ce_rdyz; /* XXX: description ?, or use t_cez instead */
- u32 t_ce_avd; /* CS on to ADV on delay */
-
- /* XXX: check the possibility of combining
- * cyc_aavhd_oe & cyc_aavdh_we
- */
- u8 cyc_aavdh_oe;/* read address hold time in cycles */
- u8 cyc_aavdh_we;/* write address hold time in cycles */
- u8 cyc_oe; /* access time from OE assertion in cycles */
- u8 cyc_wpl; /* write deassertion time in cycles */
- u32 cyc_iaa; /* initial access time in cycles */
-
- /* extra delays */
- bool ce_xdelay;
- bool avd_xdelay;
- bool oe_xdelay;
- bool we_xdelay;
-};
-
-struct gpmc_settings {
- bool burst_wrap; /* enables wrap bursting */
- bool burst_read; /* enables read page/burst mode */
- bool burst_write; /* enables write page/burst mode */
- bool device_nand; /* device is NAND */
- bool sync_read; /* enables synchronous reads */
- bool sync_write; /* enables synchronous writes */
- bool wait_on_read; /* monitor wait on reads */
- bool wait_on_write; /* monitor wait on writes */
- u32 burst_len; /* page/burst length */
- u32 device_width; /* device bus width (8 or 16 bit) */
- u32 mux_add_data; /* multiplex address & data */
- u32 wait_pin; /* wait-pin to be used */
-};
-
-extern int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
- struct gpmc_settings *gpmc_s,
- struct gpmc_device_timings *dev_t);
-
-extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
-extern int gpmc_get_client_irq(unsigned irq_config);
-
-extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
-
-extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
-extern int gpmc_calc_divider(unsigned int sync_clk);
-extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
-extern int gpmc_cs_program_settings(int cs, struct gpmc_settings *p);
-extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
-extern void gpmc_cs_free(int cs);
-extern void omap3_gpmc_save_context(void);
-extern void omap3_gpmc_restore_context(void);
-extern int gpmc_configure(int cmd, int wval);
-extern void gpmc_read_settings_dt(struct device_node *np,
- struct gpmc_settings *p);
-
-#endif
+#include <linux/omap-gpmc.h>
#include <linux/string.h>
#include <linux/delay.h>
#include <linux/gpio.h>
+#include <linux/mmc/host.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include "soc.h"
#include "omap_device.h"
#include "omap-pm.h"
#include "mux.h"
-#include "mmc.h"
#include "hsmmc.h"
#include "control.h"
#define HSMMC_NAME_LEN 9
-#if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
-
-static int hsmmc_get_context_loss(struct device *dev)
-{
- return omap_pm_get_dev_context_loss_count(dev);
-}
-
-#else
-#define hsmmc_get_context_loss NULL
-#endif
-
-static void omap_hsmmc1_before_set_reg(struct device *dev, int slot,
- int power_on, int vdd)
+static void omap_hsmmc1_before_set_reg(struct device *dev,
+ int power_on, int vdd)
{
u32 reg, prog_io;
- struct omap_mmc_platform_data *mmc = dev->platform_data;
+ struct omap_hsmmc_platform_data *mmc = dev->platform_data;
- if (mmc->slots[0].remux)
- mmc->slots[0].remux(dev, slot, power_on);
+ if (mmc->remux)
+ mmc->remux(dev, power_on);
/*
* Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the
omap_ctrl_writel(reg, OMAP243X_CONTROL_DEVCONF1);
}
- if (mmc->slots[0].internal_clock) {
+ if (mmc->internal_clock) {
reg = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
reg |= OMAP2_MMCSDIO1ADPCLKISEL;
omap_ctrl_writel(reg, OMAP2_CONTROL_DEVCONF0);
}
}
-static void omap_hsmmc1_after_set_reg(struct device *dev, int slot,
- int power_on, int vdd)
+static void omap_hsmmc1_after_set_reg(struct device *dev, int power_on, int vdd)
{
u32 reg;
}
}
-static void hsmmc2_select_input_clk_src(struct omap_mmc_platform_data *mmc)
+static void hsmmc2_select_input_clk_src(struct omap_hsmmc_platform_data *mmc)
{
u32 reg;
reg = omap_ctrl_readl(control_devconf1_offset);
- if (mmc->slots[0].internal_clock)
+ if (mmc->internal_clock)
reg |= OMAP2_MMCSDIO2ADPCLKISEL;
else
reg &= ~OMAP2_MMCSDIO2ADPCLKISEL;
omap_ctrl_writel(reg, control_devconf1_offset);
}
-static void hsmmc2_before_set_reg(struct device *dev, int slot,
- int power_on, int vdd)
+static void hsmmc2_before_set_reg(struct device *dev, int power_on, int vdd)
{
- struct omap_mmc_platform_data *mmc = dev->platform_data;
+ struct omap_hsmmc_platform_data *mmc = dev->platform_data;
- if (mmc->slots[0].remux)
- mmc->slots[0].remux(dev, slot, power_on);
+ if (mmc->remux)
+ mmc->remux(dev, power_on);
if (power_on)
hsmmc2_select_input_clk_src(mmc);
}
-static int am35x_hsmmc2_set_power(struct device *dev, int slot,
- int power_on, int vdd)
+static int am35x_hsmmc2_set_power(struct device *dev, int power_on, int vdd)
{
- struct omap_mmc_platform_data *mmc = dev->platform_data;
+ struct omap_hsmmc_platform_data *mmc = dev->platform_data;
if (power_on)
hsmmc2_select_input_clk_src(mmc);
return 0;
}
-static int nop_mmc_set_power(struct device *dev, int slot, int power_on,
- int vdd)
+static int nop_mmc_set_power(struct device *dev, int power_on, int vdd)
{
return 0;
}
-static inline void omap_hsmmc_mux(struct omap_mmc_platform_data *mmc_controller,
- int controller_nr)
+static inline void omap_hsmmc_mux(struct omap_hsmmc_platform_data
+ *mmc_controller, int controller_nr)
{
- if (gpio_is_valid(mmc_controller->slots[0].switch_pin) &&
- (mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
- omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
- OMAP_PIN_INPUT_PULLUP);
- if (gpio_is_valid(mmc_controller->slots[0].gpio_wp) &&
- (mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
- omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
- OMAP_PIN_INPUT_PULLUP);
+ if (gpio_is_valid(mmc_controller->switch_pin) &&
+ (mmc_controller->switch_pin < OMAP_MAX_GPIO_LINES))
+ omap_mux_init_gpio(mmc_controller->switch_pin,
+ OMAP_PIN_INPUT_PULLUP);
+ if (gpio_is_valid(mmc_controller->gpio_wp) &&
+ (mmc_controller->gpio_wp < OMAP_MAX_GPIO_LINES))
+ omap_mux_init_gpio(mmc_controller->gpio_wp,
+ OMAP_PIN_INPUT_PULLUP);
if (cpu_is_omap34xx()) {
if (controller_nr == 0) {
omap_mux_init_signal("sdmmc1_clk",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat0",
OMAP_PIN_INPUT_PULLUP);
- if (mmc_controller->slots[0].caps &
+ if (mmc_controller->caps &
(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
omap_mux_init_signal("sdmmc1_dat1",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat3",
OMAP_PIN_INPUT_PULLUP);
}
- if (mmc_controller->slots[0].caps &
+ if (mmc_controller->caps &
MMC_CAP_8_BIT_DATA) {
omap_mux_init_signal("sdmmc1_dat4",
OMAP_PIN_INPUT_PULLUP);
* For 8 wire configurations, Lines DAT4, 5, 6 and 7
* need to be muxed in the board-*.c files
*/
- if (mmc_controller->slots[0].caps &
+ if (mmc_controller->caps &
(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
omap_mux_init_signal("sdmmc2_dat1",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_dat3",
OMAP_PIN_INPUT_PULLUP);
}
- if (mmc_controller->slots[0].caps &
+ if (mmc_controller->caps &
MMC_CAP_8_BIT_DATA) {
omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4",
OMAP_PIN_INPUT_PULLUP);
}
static int __init omap_hsmmc_pdata_init(struct omap2_hsmmc_info *c,
- struct omap_mmc_platform_data *mmc)
+ struct omap_hsmmc_platform_data *mmc)
{
char *hc_name;
else
snprintf(hc_name, (HSMMC_NAME_LEN + 1), "mmc%islot%i",
c->mmc, 1);
- mmc->slots[0].name = hc_name;
- mmc->nr_slots = 1;
- mmc->slots[0].caps = c->caps;
- mmc->slots[0].pm_caps = c->pm_caps;
- mmc->slots[0].internal_clock = !c->ext_clock;
- mmc->max_freq = c->max_freq;
+ mmc->name = hc_name;
+ mmc->caps = c->caps;
+ mmc->internal_clock = !c->ext_clock;
mmc->reg_offset = 0;
- mmc->get_context_loss_count = hsmmc_get_context_loss;
- mmc->slots[0].switch_pin = c->gpio_cd;
- mmc->slots[0].gpio_wp = c->gpio_wp;
+ mmc->switch_pin = c->gpio_cd;
+ mmc->gpio_wp = c->gpio_wp;
- mmc->slots[0].remux = c->remux;
- mmc->slots[0].init_card = c->init_card;
+ mmc->remux = c->remux;
+ mmc->init_card = c->init_card;
if (c->cover_only)
- mmc->slots[0].cover = 1;
+ mmc->cover = 1;
if (c->nonremovable)
- mmc->slots[0].nonremovable = 1;
-
- if (c->power_saving)
- mmc->slots[0].power_saving = 1;
-
- if (c->no_off)
- mmc->slots[0].no_off = 1;
-
- if (c->no_off_init)
- mmc->slots[0].no_regulator_off_init = c->no_off_init;
-
- if (c->vcc_aux_disable_is_sleep)
- mmc->slots[0].vcc_aux_disable_is_sleep = 1;
+ mmc->nonremovable = 1;
/*
* NOTE: MMC slots should have a Vcc regulator set up.
* temporary HACK: ocr_mask instead of fixed supply
*/
if (soc_is_am35xx())
- mmc->slots[0].ocr_mask = MMC_VDD_165_195 |
+ mmc->ocr_mask = MMC_VDD_165_195 |
MMC_VDD_26_27 |
MMC_VDD_27_28 |
MMC_VDD_29_30 |
MMC_VDD_30_31 |
MMC_VDD_31_32;
else
- mmc->slots[0].ocr_mask = c->ocr_mask;
+ mmc->ocr_mask = c->ocr_mask;
if (!soc_is_am35xx())
- mmc->slots[0].features |= HSMMC_HAS_PBIAS;
+ mmc->features |= HSMMC_HAS_PBIAS;
switch (c->mmc) {
case 1:
- if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
+ if (mmc->features & HSMMC_HAS_PBIAS) {
/* on-chip level shifting via PBIAS0/PBIAS1 */
- mmc->slots[0].before_set_reg =
+ mmc->before_set_reg =
omap_hsmmc1_before_set_reg;
- mmc->slots[0].after_set_reg =
+ mmc->after_set_reg =
omap_hsmmc1_after_set_reg;
}
if (soc_is_am35xx())
- mmc->slots[0].set_power = nop_mmc_set_power;
+ mmc->set_power = nop_mmc_set_power;
/* OMAP3630 HSMMC1 supports only 4-bit */
if (cpu_is_omap3630() &&
(c->caps & MMC_CAP_8_BIT_DATA)) {
c->caps &= ~MMC_CAP_8_BIT_DATA;
c->caps |= MMC_CAP_4_BIT_DATA;
- mmc->slots[0].caps = c->caps;
+ mmc->caps = c->caps;
}
break;
case 2:
if (soc_is_am35xx())
- mmc->slots[0].set_power = am35x_hsmmc2_set_power;
+ mmc->set_power = am35x_hsmmc2_set_power;
if (c->ext_clock)
c->transceiver = 1;
c->caps &= ~MMC_CAP_8_BIT_DATA;
c->caps |= MMC_CAP_4_BIT_DATA;
}
- if (mmc->slots[0].features & HSMMC_HAS_PBIAS) {
+ if (mmc->features & HSMMC_HAS_PBIAS) {
/* off-chip level shifting, or none */
- mmc->slots[0].before_set_reg = hsmmc2_before_set_reg;
- mmc->slots[0].after_set_reg = NULL;
+ mmc->before_set_reg = hsmmc2_before_set_reg;
+ mmc->after_set_reg = NULL;
}
break;
case 3:
case 4:
case 5:
- mmc->slots[0].before_set_reg = NULL;
- mmc->slots[0].after_set_reg = NULL;
+ mmc->before_set_reg = NULL;
+ mmc->after_set_reg = NULL;
break;
default:
pr_err("MMC%d configuration not supported!\n", c->mmc);
void omap_hsmmc_late_init(struct omap2_hsmmc_info *c)
{
struct platform_device *pdev;
- struct omap_mmc_platform_data *mmc_pdata;
+ struct omap_hsmmc_platform_data *mmc_pdata;
int res;
if (omap_hsmmc_done != 1)
if (!mmc_pdata)
continue;
- mmc_pdata->slots[0].switch_pin = c->gpio_cd;
- mmc_pdata->slots[0].gpio_wp = c->gpio_wp;
+ mmc_pdata->switch_pin = c->gpio_cd;
+ mmc_pdata->gpio_wp = c->gpio_wp;
res = omap_device_register(pdev);
if (res)
struct omap_device *od;
struct platform_device *pdev;
char oh_name[MAX_OMAP_MMC_HWMOD_NAME_LEN];
- struct omap_mmc_platform_data *mmc_data;
- struct omap_mmc_dev_attr *mmc_dev_attr;
+ struct omap_hsmmc_platform_data *mmc_data;
+ struct omap_hsmmc_dev_attr *mmc_dev_attr;
char *name;
int res;
- mmc_data = kzalloc(sizeof(struct omap_mmc_platform_data), GFP_KERNEL);
+ mmc_data = kzalloc(sizeof(*mmc_data), GFP_KERNEL);
if (!mmc_data) {
pr_err("Cannot allocate memory for mmc device!\n");
return;
}
res = platform_device_add_data(pdev, mmc_data,
- sizeof(struct omap_mmc_platform_data));
+ sizeof(struct omap_hsmmc_platform_data));
if (res) {
pr_err("Could not add pdata for %s\n", name);
goto put_pdev;
platform_device_put(pdev);
free_name:
- kfree(mmc_data->slots[0].name);
+ kfree(mmc_data->name);
free_mmc:
kfree(mmc_data);
u8 mmc; /* controller 1/2/3 */
u32 caps; /* 4/8 wires and any additional host
* capabilities OR'd (ref. linux/mmc/host.h) */
- u32 pm_caps; /* PM capabilities */
bool transceiver; /* MMC-2 option */
bool ext_clock; /* use external pin for input clock */
bool cover_only; /* No card detect - just cover switch */
bool nonremovable; /* Nonremovable e.g. eMMC */
- bool power_saving; /* Try to sleep or power off when possible */
- bool no_off; /* power_saving and power is not to go off */
- bool no_off_init; /* no power off when not in MMC sleep state */
- bool vcc_aux_disable_is_sleep; /* Regulator off remapped to sleep */
bool deferred; /* mmc needs a deferred probe */
int gpio_cd; /* or -EINVAL */
int gpio_wp; /* or -EINVAL */
char *name; /* or NULL for default */
struct platform_device *pdev; /* mmc controller instance */
int ocr_mask; /* temporary HACK */
- int max_freq; /* maximum clock, if constrained by external
- * circuitry, or 0 for default */
/* Remux (pad configuration) when powering on/off */
- void (*remux)(struct device *dev, int slot, int power_on);
+ void (*remux)(struct device *dev, int power_on);
/* init some special card */
void (*init_card)(struct mmc_card *card);
};
#include "sram.h"
#include "cm2xxx.h"
#include "cm3xxx.h"
+#include "cm33xx.h"
+#include "cm44xx.h"
#include "prm.h"
#include "cm.h"
#include "prcm_mpu44xx.h"
#include "prminst44xx.h"
-#include "cminst44xx.h"
#include "prm2xxx.h"
#include "prm3xxx.h"
+#include "prm33xx.h"
#include "prm44xx.h"
#include "opp2xxx.h"
omap2_set_globals_cm(AM33XX_L4_WK_IO_ADDRESS(AM33XX_PRCM_BASE), NULL);
omap3xxx_check_revision();
am33xx_check_features();
+ am33xx_prm_init();
+ am33xx_cm_init();
am33xx_powerdomains_init();
am33xx_clockdomains_init();
am33xx_hwmod_init();
omap_cm_base_init();
omap3xxx_check_revision();
am33xx_check_features();
+ omap44xx_prm_init();
+ omap4_cm_init();
am43xx_powerdomains_init();
am43xx_clockdomains_init();
am43xx_hwmod_init();
omap_cm_base_init();
omap4xxx_check_revision();
omap4xxx_check_features();
+ omap4_cm_init();
omap4_pm_init_early();
omap44xx_prm_init();
omap44xx_voltagedomains_init();
omap_cm_base_init();
omap44xx_prm_init();
omap5xxx_check_revision();
+ omap4_cm_init();
omap54xx_voltagedomains_init();
omap54xx_powerdomains_init();
omap54xx_clockdomains_init();
omap_cm_base_init();
omap44xx_prm_init();
dra7xxx_check_revision();
+ omap4_cm_init();
dra7xx_powerdomains_init();
dra7xx_clockdomains_init();
dra7xx_hwmod_init();
-#include <linux/mmc/host.h>
-#include <linux/platform_data/mmc-omap.h>
#define OMAP24XX_NR_MMC 2
#define OMAP2420_MMC_SIZE OMAP1_MMC_SIZE
#define OMAP4_MMC_REG_OFFSET 0x100
-#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE)
-void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data);
-#else
-static inline void omap242x_init_mmc(struct omap_mmc_platform_data **mmc_data)
-{
-}
-#endif
-
struct omap_hwmod;
int omap_msdi_reset(struct omap_hwmod *oh);
int omap4_enter_lowpower(unsigned int cpu, unsigned int power_state)
{
struct omap4_cpu_pm_info *pm_info = &per_cpu(omap4_pm_info, cpu);
- unsigned int save_state = 0;
+ unsigned int save_state = 0, cpu_logic_state = PWRDM_POWER_RET;
unsigned int wakeup_cpu;
if (omap_rev() == OMAP4430_REV_ES1_0)
save_state = 0;
break;
case PWRDM_POWER_OFF:
+ cpu_logic_state = PWRDM_POWER_OFF;
save_state = 1;
break;
case PWRDM_POWER_RET:
cpu_clear_prev_logic_pwrst(cpu);
pwrdm_set_next_pwrst(pm_info->pwrdm, power_state);
+ pwrdm_set_logic_retst(pm_info->pwrdm, cpu_logic_state);
set_cpu_wakeup_addr(cpu, virt_to_phys(omap_pm_ops.resume));
omap_pm_ops.scu_prepare(cpu, power_state);
l2x0_pwrst_prepare(cpu, save_state);
#include "soc.h"
#include "common.h"
-#include "prm2xxx.h"
+#include "prm.h"
/*
* reset_virt_prcm_set_ck, reset_sys_ck: pointers to the virt_prcm_set
/* XXX Should save the cmd argument for use after the reboot */
- omap2xxx_prm_dpll_reset(); /* never returns */
- while (1);
+ omap_prm_reset_system();
}
/**
#include <linux/init.h>
#include <linux/reboot.h>
-#include "iomap.h"
-#include "common.h"
#include "control.h"
-#include "prm3xxx.h"
+#include "prm.h"
/* Global address base setup code */
void omap3xxx_restart(enum reboot_mode mode, const char *cmd)
{
omap3_ctrl_write_boot_mode((cmd ? (u8)*cmd : 0));
- omap3xxx_prm_dpll3_reset(); /* never returns */
- while (1);
+ omap_prm_reset_system();
}
#include "soc.h"
#include "iomap.h"
#include "common.h"
-#include "mmc.h"
#include "prminst44xx.h"
#include "prcm_mpu44xx.h"
#include "omap4-sar-layout.h"
#include <linux/types.h>
#include <linux/reboot.h>
-#include "prminst44xx.h"
+#include "prm.h"
/**
* omap44xx_restart - trigger a software restart of the SoC
void omap44xx_restart(enum reboot_mode mode, const char *cmd)
{
/* XXX Should save 'cmd' into scratchpad for use after reboot */
- omap4_prminst_global_warm_sw_reset(); /* never returns */
- while (1)
- ;
+ omap_prm_reset_system();
}
static int __init omap_device_late_init(void)
{
bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle);
+
+ WARN(!of_have_populated_dt(),
+ "legacy booting deprecated, please update to boot with .dts\n");
+
return 0;
}
omap_late_initcall_sync(omap_device_late_init);
#include "powerdomain.h"
#include "cm2xxx.h"
#include "cm3xxx.h"
-#include "cminst44xx.h"
#include "cm33xx.h"
#include "prm.h"
#include "prm3xxx.h"
pr_debug("omap_hwmod: %s: %s: %d\n",
oh->name, __func__, oh->prcm.omap4.modulemode);
- omap4_cminst_module_enable(oh->prcm.omap4.modulemode,
- oh->clkdm->prcm_partition,
- oh->clkdm->cm_inst,
- oh->clkdm->clkdm_offs,
- oh->prcm.omap4.clkctrl_offs);
-}
-
-/**
- * _am33xx_enable_module - enable CLKCTRL modulemode on AM33XX
- * @oh: struct omap_hwmod *
- *
- * Enables the PRCM module mode related to the hwmod @oh.
- * No return value.
- */
-static void _am33xx_enable_module(struct omap_hwmod *oh)
-{
- if (!oh->clkdm || !oh->prcm.omap4.modulemode)
- return;
-
- pr_debug("omap_hwmod: %s: %s: %d\n",
- oh->name, __func__, oh->prcm.omap4.modulemode);
-
- am33xx_cm_module_enable(oh->prcm.omap4.modulemode, oh->clkdm->cm_inst,
- oh->clkdm->clkdm_offs,
- oh->prcm.omap4.clkctrl_offs);
+ omap_cm_module_enable(oh->prcm.omap4.modulemode,
+ oh->clkdm->prcm_partition,
+ oh->clkdm->cm_inst, oh->prcm.omap4.clkctrl_offs);
}
/**
if (oh->flags & HWMOD_NO_IDLEST)
return 0;
- return omap4_cminst_wait_module_idle(oh->clkdm->prcm_partition,
- oh->clkdm->cm_inst,
- oh->clkdm->clkdm_offs,
- oh->prcm.omap4.clkctrl_offs);
-}
-
-/**
- * _am33xx_wait_target_disable - wait for a module to be disabled on AM33XX
- * @oh: struct omap_hwmod *
- *
- * Wait for a module @oh to enter slave idle. Returns 0 if the module
- * does not have an IDLEST bit or if the module successfully enters
- * slave idle; otherwise, pass along the return value of the
- * appropriate *_cm*_wait_module_idle() function.
- */
-static int _am33xx_wait_target_disable(struct omap_hwmod *oh)
-{
- if (!oh)
- return -EINVAL;
-
- if (oh->_int_flags & _HWMOD_NO_MPU_PORT)
- return 0;
-
- if (oh->flags & HWMOD_NO_IDLEST)
- return 0;
-
- return am33xx_cm_wait_module_idle(oh->clkdm->cm_inst,
- oh->clkdm->clkdm_offs,
- oh->prcm.omap4.clkctrl_offs);
+ return omap_cm_wait_module_idle(oh->clkdm->prcm_partition,
+ oh->clkdm->cm_inst,
+ oh->prcm.omap4.clkctrl_offs, 0);
}
/**
pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__);
- omap4_cminst_module_disable(oh->clkdm->prcm_partition,
- oh->clkdm->cm_inst,
- oh->clkdm->clkdm_offs,
- oh->prcm.omap4.clkctrl_offs);
+ omap_cm_module_disable(oh->clkdm->prcm_partition, oh->clkdm->cm_inst,
+ oh->prcm.omap4.clkctrl_offs);
v = _omap4_wait_target_disable(oh);
if (v)
return 0;
}
-/**
- * _am33xx_disable_module - enable CLKCTRL modulemode on AM33XX
- * @oh: struct omap_hwmod *
- *
- * Disable the PRCM module mode related to the hwmod @oh.
- * Return EINVAL if the modulemode is not supported and 0 in case of success.
- */
-static int _am33xx_disable_module(struct omap_hwmod *oh)
-{
- int v;
-
- if (!oh->clkdm || !oh->prcm.omap4.modulemode)
- return -EINVAL;
-
- pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__);
-
- if (_are_any_hardreset_lines_asserted(oh))
- return 0;
-
- am33xx_cm_module_disable(oh->clkdm->cm_inst, oh->clkdm->clkdm_offs,
- oh->prcm.omap4.clkctrl_offs);
-
- v = _am33xx_wait_target_disable(oh);
- if (v)
- pr_warn("omap_hwmod: %s: _wait_target_disable failed\n",
- oh->name);
-
- return 0;
-}
-
/**
* _ocp_softreset - reset an omap_hwmod via the OCP_SYSCONFIG bit
* @oh: struct omap_hwmod *
spin_lock_irqsave(&io_chain_lock, flags);
- if (cpu_is_omap34xx())
- omap3xxx_prm_reconfigure_io_chain();
- else if (cpu_is_omap44xx())
- omap44xx_prm_reconfigure_io_chain();
+ omap_prm_reconfigure_io_chain();
spin_unlock_irqrestore(&io_chain_lock, flags);
}
if (oh->_state != _HWMOD_STATE_INITIALIZED)
return 0;
+ if (oh->parent_hwmod) {
+ int r;
+
+ r = _enable(oh->parent_hwmod);
+ WARN(r, "hwmod: %s: setup: failed to enable parent hwmod %s\n",
+ oh->name, oh->parent_hwmod->name);
+ }
+
_setup_iclk_autoidle(oh);
if (!_setup_reset(oh))
_setup_postsetup(oh);
+ if (oh->parent_hwmod) {
+ u8 postsetup_state;
+
+ postsetup_state = oh->parent_hwmod->_postsetup_state;
+
+ if (postsetup_state == _HWMOD_STATE_IDLE)
+ _idle(oh->parent_hwmod);
+ else if (postsetup_state == _HWMOD_STATE_DISABLED)
+ _shutdown(oh->parent_hwmod);
+ else if (postsetup_state != _HWMOD_STATE_ENABLED)
+ WARN(1, "hwmod: %s: unknown postsetup state %d! defaulting to enabled\n",
+ oh->parent_hwmod->name, postsetup_state);
+ }
+
return 0;
}
_alloc_links(&ml, &sl);
ml->ocp_if = oi;
- INIT_LIST_HEAD(&ml->node);
list_add(&ml->node, &oi->master->master_ports);
oi->master->masters_cnt++;
sl->ocp_if = oi;
- INIT_LIST_HEAD(&sl->node);
list_add(&sl->node, &oi->slave->slave_ports);
oi->slave->slaves_cnt++;
/* Static functions intended only for use in soc_ops field function pointers */
/**
- * _omap2xxx_wait_target_ready - wait for a module to leave slave idle
- * @oh: struct omap_hwmod *
- *
- * Wait for a module @oh to leave slave idle. Returns 0 if the module
- * does not have an IDLEST bit or if the module successfully leaves
- * slave idle; otherwise, pass along the return value of the
- * appropriate *_cm*_wait_module_ready() function.
- */
-static int _omap2xxx_wait_target_ready(struct omap_hwmod *oh)
-{
- if (!oh)
- return -EINVAL;
-
- if (oh->flags & HWMOD_NO_IDLEST)
- return 0;
-
- if (!_find_mpu_rt_port(oh))
- return 0;
-
- /* XXX check module SIDLEMODE, hardreset status, enabled clocks */
-
- return omap2xxx_cm_wait_module_ready(oh->prcm.omap2.module_offs,
- oh->prcm.omap2.idlest_reg_id,
- oh->prcm.omap2.idlest_idle_bit);
-}
-
-/**
- * _omap3xxx_wait_target_ready - wait for a module to leave slave idle
+ * _omap2xxx_3xxx_wait_target_ready - wait for a module to leave slave idle
* @oh: struct omap_hwmod *
*
* Wait for a module @oh to leave slave idle. Returns 0 if the module
* slave idle; otherwise, pass along the return value of the
* appropriate *_cm*_wait_module_ready() function.
*/
-static int _omap3xxx_wait_target_ready(struct omap_hwmod *oh)
+static int _omap2xxx_3xxx_wait_target_ready(struct omap_hwmod *oh)
{
if (!oh)
return -EINVAL;
/* XXX check module SIDLEMODE, hardreset status, enabled clocks */
- return omap3xxx_cm_wait_module_ready(oh->prcm.omap2.module_offs,
- oh->prcm.omap2.idlest_reg_id,
- oh->prcm.omap2.idlest_idle_bit);
+ return omap_cm_wait_module_ready(0, oh->prcm.omap2.module_offs,
+ oh->prcm.omap2.idlest_reg_id,
+ oh->prcm.omap2.idlest_idle_bit);
}
/**
/* XXX check module SIDLEMODE, hardreset status */
- return omap4_cminst_wait_module_ready(oh->clkdm->prcm_partition,
- oh->clkdm->cm_inst,
- oh->clkdm->clkdm_offs,
- oh->prcm.omap4.clkctrl_offs);
-}
-
-/**
- * _am33xx_wait_target_ready - wait for a module to leave slave idle
- * @oh: struct omap_hwmod *
- *
- * Wait for a module @oh to leave slave idle. Returns 0 if the module
- * does not have an IDLEST bit or if the module successfully leaves
- * slave idle; otherwise, pass along the return value of the
- * appropriate *_cm*_wait_module_ready() function.
- */
-static int _am33xx_wait_target_ready(struct omap_hwmod *oh)
-{
- if (!oh || !oh->clkdm)
- return -EINVAL;
-
- if (oh->flags & HWMOD_NO_IDLEST)
- return 0;
-
- if (!_find_mpu_rt_port(oh))
- return 0;
-
- /* XXX check module SIDLEMODE, hardreset status */
-
- return am33xx_cm_wait_module_ready(oh->clkdm->cm_inst,
- oh->clkdm->clkdm_offs,
- oh->prcm.omap4.clkctrl_offs);
+ return omap_cm_wait_module_ready(oh->clkdm->prcm_partition,
+ oh->clkdm->cm_inst,
+ oh->prcm.omap4.clkctrl_offs, 0);
}
/**
static int _omap2_assert_hardreset(struct omap_hwmod *oh,
struct omap_hwmod_rst_info *ohri)
{
- return omap2_prm_assert_hardreset(oh->prcm.omap2.module_offs,
- ohri->rst_shift);
+ return omap_prm_assert_hardreset(ohri->rst_shift, 0,
+ oh->prcm.omap2.module_offs, 0);
}
/**
static int _omap2_deassert_hardreset(struct omap_hwmod *oh,
struct omap_hwmod_rst_info *ohri)
{
- return omap2_prm_deassert_hardreset(oh->prcm.omap2.module_offs,
- ohri->rst_shift,
- ohri->st_shift);
+ return omap_prm_deassert_hardreset(ohri->rst_shift, ohri->st_shift, 0,
+ oh->prcm.omap2.module_offs, 0, 0);
}
/**
static int _omap2_is_hardreset_asserted(struct omap_hwmod *oh,
struct omap_hwmod_rst_info *ohri)
{
- return omap2_prm_is_hardreset_asserted(oh->prcm.omap2.module_offs,
- ohri->st_shift);
+ return omap_prm_is_hardreset_asserted(ohri->st_shift, 0,
+ oh->prcm.omap2.module_offs, 0);
}
/**
if (!oh->clkdm)
return -EINVAL;
- return omap4_prminst_assert_hardreset(ohri->rst_shift,
- oh->clkdm->pwrdm.ptr->prcm_partition,
- oh->clkdm->pwrdm.ptr->prcm_offs,
- oh->prcm.omap4.rstctrl_offs);
+ return omap_prm_assert_hardreset(ohri->rst_shift,
+ oh->clkdm->pwrdm.ptr->prcm_partition,
+ oh->clkdm->pwrdm.ptr->prcm_offs,
+ oh->prcm.omap4.rstctrl_offs);
}
/**
if (ohri->st_shift)
pr_err("omap_hwmod: %s: %s: hwmod data error: OMAP4 does not support st_shift\n",
oh->name, ohri->name);
- return omap4_prminst_deassert_hardreset(ohri->rst_shift,
- oh->clkdm->pwrdm.ptr->prcm_partition,
- oh->clkdm->pwrdm.ptr->prcm_offs,
- oh->prcm.omap4.rstctrl_offs);
+ return omap_prm_deassert_hardreset(ohri->rst_shift, 0,
+ oh->clkdm->pwrdm.ptr->prcm_partition,
+ oh->clkdm->pwrdm.ptr->prcm_offs,
+ oh->prcm.omap4.rstctrl_offs, 0);
}
/**
if (!oh->clkdm)
return -EINVAL;
- return omap4_prminst_is_hardreset_asserted(ohri->rst_shift,
- oh->clkdm->pwrdm.ptr->prcm_partition,
- oh->clkdm->pwrdm.ptr->prcm_offs,
- oh->prcm.omap4.rstctrl_offs);
+ return omap_prm_is_hardreset_asserted(ohri->rst_shift,
+ oh->clkdm->pwrdm.ptr->
+ prcm_partition,
+ oh->clkdm->pwrdm.ptr->prcm_offs,
+ oh->prcm.omap4.rstctrl_offs);
}
/**
struct omap_hwmod_rst_info *ohri)
{
- return am33xx_prm_assert_hardreset(ohri->rst_shift,
- oh->clkdm->pwrdm.ptr->prcm_offs,
- oh->prcm.omap4.rstctrl_offs);
+ return omap_prm_assert_hardreset(ohri->rst_shift, 0,
+ oh->clkdm->pwrdm.ptr->prcm_offs,
+ oh->prcm.omap4.rstctrl_offs);
}
/**
static int _am33xx_deassert_hardreset(struct omap_hwmod *oh,
struct omap_hwmod_rst_info *ohri)
{
- return am33xx_prm_deassert_hardreset(ohri->rst_shift,
- ohri->st_shift,
- oh->clkdm->pwrdm.ptr->prcm_offs,
- oh->prcm.omap4.rstctrl_offs,
- oh->prcm.omap4.rstst_offs);
+ return omap_prm_deassert_hardreset(ohri->rst_shift, ohri->st_shift, 0,
+ oh->clkdm->pwrdm.ptr->prcm_offs,
+ oh->prcm.omap4.rstctrl_offs,
+ oh->prcm.omap4.rstst_offs);
}
/**
static int _am33xx_is_hardreset_asserted(struct omap_hwmod *oh,
struct omap_hwmod_rst_info *ohri)
{
- return am33xx_prm_is_hardreset_asserted(ohri->rst_shift,
- oh->clkdm->pwrdm.ptr->prcm_offs,
- oh->prcm.omap4.rstctrl_offs);
+ return omap_prm_is_hardreset_asserted(ohri->rst_shift, 0,
+ oh->clkdm->pwrdm.ptr->prcm_offs,
+ oh->prcm.omap4.rstctrl_offs);
}
/* Public functions */
void __init omap_hwmod_init(void)
{
if (cpu_is_omap24xx()) {
- soc_ops.wait_target_ready = _omap2xxx_wait_target_ready;
+ soc_ops.wait_target_ready = _omap2xxx_3xxx_wait_target_ready;
soc_ops.assert_hardreset = _omap2_assert_hardreset;
soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
} else if (cpu_is_omap34xx()) {
- soc_ops.wait_target_ready = _omap3xxx_wait_target_ready;
+ soc_ops.wait_target_ready = _omap2xxx_3xxx_wait_target_ready;
soc_ops.assert_hardreset = _omap2_assert_hardreset;
soc_ops.deassert_hardreset = _omap2_deassert_hardreset;
soc_ops.is_hardreset_asserted = _omap2_is_hardreset_asserted;
soc_ops.enable_module = _omap4_enable_module;
soc_ops.disable_module = _omap4_disable_module;
soc_ops.wait_target_ready = _omap4_wait_target_ready;
- soc_ops.assert_hardreset = _am33xx_assert_hardreset;
- soc_ops.deassert_hardreset = _am33xx_deassert_hardreset;
- soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted;
+ soc_ops.assert_hardreset = _omap4_assert_hardreset;
+ soc_ops.deassert_hardreset = _omap4_deassert_hardreset;
+ soc_ops.is_hardreset_asserted = _omap4_is_hardreset_asserted;
soc_ops.init_clkdm = _init_clkdm;
} else if (soc_is_am33xx()) {
- soc_ops.enable_module = _am33xx_enable_module;
- soc_ops.disable_module = _am33xx_disable_module;
- soc_ops.wait_target_ready = _am33xx_wait_target_ready;
+ soc_ops.enable_module = _omap4_enable_module;
+ soc_ops.disable_module = _omap4_disable_module;
+ soc_ops.wait_target_ready = _omap4_wait_target_ready;
soc_ops.assert_hardreset = _am33xx_assert_hardreset;
soc_ops.deassert_hardreset = _am33xx_deassert_hardreset;
soc_ops.is_hardreset_asserted = _am33xx_is_hardreset_asserted;
* @flags: hwmod flags (documented below)
* @_lock: spinlock serializing operations on this hwmod
* @node: list node for hwmod list (internal use)
+ * @parent_hwmod: (temporary) a pointer to the hierarchical parent of this hwmod
*
* @main_clk refers to this module's "main clock," which for our
* purposes is defined as "the functional clock needed for register
* the omap_hwmod code and should not be set during initialization.
*
* @masters and @slaves are now deprecated.
+ *
+ * @parent_hwmod is temporary; there should be no need for it, as this
+ * information should already be expressed in the OCP interface
+ * structures. @parent_hwmod is present as a workaround until we improve
+ * handling for hwmods with multiple parents (e.g., OMAP4+ DSS with
+ * multiple register targets across different interconnects).
*/
struct omap_hwmod {
const char *name;
u8 _int_flags;
u8 _state;
u8 _postsetup_state;
+ struct omap_hwmod *parent_hwmod;
};
struct omap_hwmod *omap_hwmod_lookup(const char *name);
#include <linux/i2c-omap.h>
#include <linux/platform_data/asoc-ti-mcbsp.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include <linux/omap-dma.h>
#include <plat/dmtimer.h>
#include "omap_hwmod.h"
-#include "mmc.h"
#include "l3_2xxx.h"
#include "soc.h"
{ .role = "dbck", .clk = "mmchsdb1_fck" },
};
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
*/
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include <linux/platform_data/spi-omap2-mcspi.h>
#include "omap_hwmod.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
#include "cm33xx.h"
#include "prm33xx.h"
};
/* mmc0 */
-static struct omap_mmc_dev_attr am33xx_mmc0_dev_attr = {
+static struct omap_hsmmc_dev_attr am33xx_mmc0_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
};
/* mmc1 */
-static struct omap_mmc_dev_attr am33xx_mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr am33xx_mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
};
/* mmc2 */
-static struct omap_mmc_dev_attr am33xx_mmc2_dev_attr = {
+static struct omap_hsmmc_dev_attr am33xx_mmc2_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
struct omap_hwmod am33xx_mmc2_hwmod = {
#include "prm33xx.h"
#include "prm-regbits-33xx.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
#include "omap_hwmod_33xx_43xx_common_data.h"
#include <linux/i2c-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include <linux/omap-dma.h>
#include "l3_3xxx.h"
#include "cm-regbits-34xx.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
#include "serial.h"
{ .role = "dbck", .clk = "omap_32k_fck", },
};
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
/* See 35xx errata 2.1.1.128 in SPRZ278F */
-static struct omap_mmc_dev_attr mmc1_pre_es3_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_pre_es3_dev_attr = {
.flags = (OMAP_HSMMC_SUPPORTS_DUAL_VOLT |
OMAP_HSMMC_BROKEN_MULTIBLOCK_READ),
};
};
/* See 35xx errata 2.1.1.128 in SPRZ278F */
-static struct omap_mmc_dev_attr mmc2_pre_es3_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc2_pre_es3_dev_attr = {
.flags = OMAP_HSMMC_BROKEN_MULTIBLOCK_READ,
};
},
};
+/*
+ * 'adc/tsc' class
+ * TouchScreen Controller (Analog-To-Digital Converter)
+ */
+static struct omap_hwmod_class_sysconfig am43xx_adc_tsc_sysc = {
+ .rev_offs = 0x00,
+ .sysc_offs = 0x10,
+ .sysc_flags = SYSC_HAS_SIDLEMODE,
+ .idlemodes = (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART |
+ SIDLE_SMART_WKUP),
+ .sysc_fields = &omap_hwmod_sysc_type2,
+};
+
+static struct omap_hwmod_class am43xx_adc_tsc_hwmod_class = {
+ .name = "adc_tsc",
+ .sysc = &am43xx_adc_tsc_sysc,
+};
+
+static struct omap_hwmod am43xx_adc_tsc_hwmod = {
+ .name = "adc_tsc",
+ .class = &am43xx_adc_tsc_hwmod_class,
+ .clkdm_name = "l3s_tsc_clkdm",
+ .main_clk = "adc_tsc_fck",
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = AM43XX_CM_WKUP_ADC_TSC_CLKCTRL_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
/* dss */
static struct omap_hwmod am43xx_dss_core_hwmod = {
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+static struct omap_hwmod_ocp_if am43xx_l4_wkup__adc_tsc = {
+ .master = &am33xx_l4_wkup_hwmod,
+ .slave = &am43xx_adc_tsc_hwmod,
+ .clk = "dpll_core_m4_div2_ck",
+ .user = OCP_USER_MPU,
+};
+
static struct omap_hwmod_ocp_if am43xx_l4_hs__cpgmac0 = {
.master = &am43xx_l4_hs_hwmod,
.slave = &am33xx_cpgmac0_hwmod,
&am43xx_l4_wkup__i2c1,
&am43xx_l4_wkup__gpio0,
&am43xx_l4_wkup__wd_timer1,
+ &am43xx_l4_wkup__adc_tsc,
&am43xx_l3_s__qspi,
&am33xx_l4_per__dcan0,
&am33xx_l4_per__dcan1,
#include <linux/io.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/i2c-omap.h>
#include "prm44xx.h"
#include "prm-regbits-44xx.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
/* Base offset for all OMAP4 interrupts external to MPUSS */
.omap4 = {
.clkctrl_offs = OMAP4_CM_DSS_DSS_CLKCTRL_OFFSET,
.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
},
},
.opt_clks = dss_opt_clks,
.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
},
},
- .dev_attr = &omap44xx_dss_dispc_dev_attr
+ .dev_attr = &omap44xx_dss_dispc_dev_attr,
+ .parent_hwmod = &omap44xx_dss_hwmod,
};
/*
},
.opt_clks = dss_dsi1_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_dsi1_opt_clks),
+ .parent_hwmod = &omap44xx_dss_hwmod,
};
/* dss_dsi2 */
},
.opt_clks = dss_dsi2_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_dsi2_opt_clks),
+ .parent_hwmod = &omap44xx_dss_hwmod,
};
/*
},
.opt_clks = dss_hdmi_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks),
+ .parent_hwmod = &omap44xx_dss_hwmod,
};
/*
};
static struct omap_hwmod_opt_clk dss_rfbi_opt_clks[] = {
- { .role = "ick", .clk = "dss_fck" },
+ { .role = "ick", .clk = "l3_div_ck" },
};
static struct omap_hwmod omap44xx_dss_rfbi_hwmod = {
},
.opt_clks = dss_rfbi_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
+ .parent_hwmod = &omap44xx_dss_hwmod,
};
/*
.context_offs = OMAP4_RM_DSS_DSS_CONTEXT_OFFSET,
},
},
+ .parent_hwmod = &omap44xx_dss_hwmod,
};
/*
};
/* mmc1 dev_attr */
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_hwmod,
- .clk = "dss_fck",
+ .clk = "l3_div_ck",
.addr = omap44xx_dss_dma_addrs,
.user = OCP_USER_SDMA,
};
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dispc = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_dispc_hwmod,
- .clk = "dss_fck",
+ .clk = "l3_div_ck",
.addr = omap44xx_dss_dispc_dma_addrs,
.user = OCP_USER_SDMA,
};
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi1 = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_dsi1_hwmod,
- .clk = "dss_fck",
+ .clk = "l3_div_ck",
.addr = omap44xx_dss_dsi1_dma_addrs,
.user = OCP_USER_SDMA,
};
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_dsi2 = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_dsi2_hwmod,
- .clk = "dss_fck",
+ .clk = "l3_div_ck",
.addr = omap44xx_dss_dsi2_dma_addrs,
.user = OCP_USER_SDMA,
};
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_hdmi = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_hdmi_hwmod,
- .clk = "dss_fck",
+ .clk = "l3_div_ck",
.addr = omap44xx_dss_hdmi_dma_addrs,
.user = OCP_USER_SDMA,
};
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_rfbi = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_rfbi_hwmod,
- .clk = "dss_fck",
+ .clk = "l3_div_ck",
.addr = omap44xx_dss_rfbi_dma_addrs,
.user = OCP_USER_SDMA,
};
static struct omap_hwmod_ocp_if omap44xx_l3_main_2__dss_venc = {
.master = &omap44xx_l3_main_2_hwmod,
.slave = &omap44xx_dss_venc_hwmod,
- .clk = "dss_fck",
+ .clk = "l3_div_ck",
.addr = omap44xx_dss_venc_dma_addrs,
.user = OCP_USER_SDMA,
};
#include <linux/io.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/i2c-omap.h>
#include "cm2_54xx.h"
#include "prm54xx.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
/* Base offset for all OMAP5 interrupts external to MPUSS */
.opt_clks = dss_dispc_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_dispc_opt_clks),
.dev_attr = &dss_dispc_dev_attr,
+ .parent_hwmod = &omap54xx_dss_hwmod,
};
/*
},
.opt_clks = dss_dsi1_a_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_dsi1_a_opt_clks),
+ .parent_hwmod = &omap54xx_dss_hwmod,
};
/* dss_dsi1_c */
},
.opt_clks = dss_dsi1_c_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_dsi1_c_opt_clks),
+ .parent_hwmod = &omap54xx_dss_hwmod,
};
/*
},
.opt_clks = dss_hdmi_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_hdmi_opt_clks),
+ .parent_hwmod = &omap54xx_dss_hwmod,
};
/*
},
.opt_clks = dss_rfbi_opt_clks,
.opt_clks_cnt = ARRAY_SIZE(dss_rfbi_opt_clks),
+ .parent_hwmod = &omap54xx_dss_hwmod,
};
/*
};
/* mmc1 dev_attr */
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
#include <linux/io.h>
#include <linux/platform_data/gpio-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
#include <linux/power/smartreflex.h>
#include <linux/i2c-omap.h>
#include "cm2_7xx.h"
#include "prm7xx.h"
#include "i2c.h"
-#include "mmc.h"
#include "wd_timer.h"
#include "soc.h"
};
/* mmc1 dev_attr */
-static struct omap_mmc_dev_attr mmc1_dev_attr = {
+static struct omap_hsmmc_dev_attr mmc1_dev_attr = {
.flags = OMAP_HSMMC_SUPPORTS_DUAL_VOLT,
};
},
};
+/* uart7 */
+static struct omap_hwmod dra7xx_uart7_hwmod = {
+ .name = "uart7",
+ .class = &dra7xx_uart_hwmod_class,
+ .clkdm_name = "l4per2_clkdm",
+ .main_clk = "uart7_gfclk_mux",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4PER2_UART7_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4PER2_UART7_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* uart8 */
+static struct omap_hwmod dra7xx_uart8_hwmod = {
+ .name = "uart8",
+ .class = &dra7xx_uart_hwmod_class,
+ .clkdm_name = "l4per2_clkdm",
+ .main_clk = "uart8_gfclk_mux",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4PER2_UART8_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4PER2_UART8_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* uart9 */
+static struct omap_hwmod dra7xx_uart9_hwmod = {
+ .name = "uart9",
+ .class = &dra7xx_uart_hwmod_class,
+ .clkdm_name = "l4per2_clkdm",
+ .main_clk = "uart9_gfclk_mux",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_L4PER2_UART9_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_L4PER2_UART9_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
+/* uart10 */
+static struct omap_hwmod dra7xx_uart10_hwmod = {
+ .name = "uart10",
+ .class = &dra7xx_uart_hwmod_class,
+ .clkdm_name = "wkupaon_clkdm",
+ .main_clk = "uart10_gfclk_mux",
+ .flags = HWMOD_SWSUP_SIDLE_ACT,
+ .prcm = {
+ .omap4 = {
+ .clkctrl_offs = DRA7XX_CM_WKUPAON_UART10_CLKCTRL_OFFSET,
+ .context_offs = DRA7XX_RM_WKUPAON_UART10_CONTEXT_OFFSET,
+ .modulemode = MODULEMODE_SWCTRL,
+ },
+ },
+};
+
/*
* 'usb_otg_ss' class
*
.user = OCP_USER_MPU | OCP_USER_SDMA,
};
+/* l4_per2 -> uart7 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__uart7 = {
+ .master = &dra7xx_l4_per2_hwmod,
+ .slave = &dra7xx_uart7_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per2 -> uart8 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__uart8 = {
+ .master = &dra7xx_l4_per2_hwmod,
+ .slave = &dra7xx_uart8_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_per2 -> uart9 */
+static struct omap_hwmod_ocp_if dra7xx_l4_per2__uart9 = {
+ .master = &dra7xx_l4_per2_hwmod,
+ .slave = &dra7xx_uart9_hwmod,
+ .clk = "l3_iclk_div",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* l4_wkup -> uart10 */
+static struct omap_hwmod_ocp_if dra7xx_l4_wkup__uart10 = {
+ .master = &dra7xx_l4_wkup_hwmod,
+ .slave = &dra7xx_uart10_hwmod,
+ .clk = "wkupaon_iclk_mux",
+ .user = OCP_USER_MPU | OCP_USER_SDMA,
+};
+
/* l4_per3 -> usb_otg_ss1 */
static struct omap_hwmod_ocp_if dra7xx_l4_per3__usb_otg_ss1 = {
.master = &dra7xx_l4_per3_hwmod,
&dra7xx_l4_per1__uart4,
&dra7xx_l4_per1__uart5,
&dra7xx_l4_per1__uart6,
+ &dra7xx_l4_per2__uart7,
+ &dra7xx_l4_per2__uart8,
+ &dra7xx_l4_per2__uart9,
+ &dra7xx_l4_wkup__uart10,
&dra7xx_l4_per3__usb_otg_ss1,
&dra7xx_l4_per3__usb_otg_ss2,
&dra7xx_l4_per3__usb_otg_ss3,
*
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/types.h>
#include <linux/delay.h>
#include <linux/clk.h>
omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
- pr_info(KERN_INFO "Waiting for PHY clock good...\n");
+ pr_info("Waiting for PHY clock good...\n");
while (!(omap_ctrl_readl(AM35XX_CONTROL_DEVCONF2)
& CONF2_PHYCLKGD)) {
cpu_relax();
if (time_after(jiffies, timeout)) {
- pr_err(KERN_ERR "musb PHY clock good timed out\n");
+ pr_err("musb PHY clock good timed out\n");
break;
}
}
devconf2 |= CONF2_NO_OVERRIDE;
break;
default:
- pr_info(KERN_INFO "Unsupported mode %u\n", musb_mode);
+ pr_info("Unsupported mode %u\n", musb_mode);
}
omap_ctrl_writel(devconf2, AM35XX_CONTROL_DEVCONF2);
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/of_platform.h>
+#include <linux/ti_wilink_st.h>
#include <linux/wl12xx.h>
#include <linux/platform_data/pinctrl-single.h>
{
omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 136);
- omap_ads7846_init(1, 57, 0, NULL);
}
static void __init omap3_sbc_t3530_legacy_init(void)
{
omap3_sbc_t3x_usb_hub_init(167, "sb-t35 usb hub");
- omap_ads7846_init(1, 57, 0, NULL);
}
-static void __init omap3_igep0020_legacy_init(void)
+struct ti_st_plat_data wilink_pdata = {
+ .nshutdown_gpio = 137,
+ .dev_name = "/dev/ttyO1",
+ .flow_cntrl = 1,
+ .baud_rate = 300000,
+};
+
+static struct platform_device wl18xx_device = {
+ .name = "kim",
+ .id = -1,
+ .dev = {
+ .platform_data = &wilink_pdata,
+ }
+};
+
+static struct platform_device btwilink_device = {
+ .name = "btwilink",
+ .id = -1,
+};
+
+static void __init omap3_igep0020_rev_f_legacy_init(void)
+{
+ legacy_init_wl12xx(0, 0, 177);
+ platform_device_register(&wl18xx_device);
+ platform_device_register(&btwilink_device);
+}
+
+static void __init omap3_igep0030_rev_g_legacy_init(void)
{
+ legacy_init_wl12xx(0, 0, 136);
+ platform_device_register(&wl18xx_device);
+ platform_device_register(&btwilink_device);
}
static void __init omap3_evm_legacy_init(void)
hsmmc2_internal_input_clk();
omap3_sbc_t3517_wifi_init();
legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 145);
- omap_ads7846_init(1, 57, 0, NULL);
}
static void __init am3517_evm_legacy_init(void)
platform_device_register(&omap3_rom_rng_device);
}
-
- /* Only on some development boards */
- gpio_request_one(164, GPIOF_OUT_INIT_LOW, "smc91x reset");
}
static void __init omap3_tao3530_legacy_init(void)
{ "nokia,omap3-n900", nokia_n900_legacy_init, },
{ "nokia,omap3-n9", hsmmc2_internal_input_clk, },
{ "nokia,omap3-n950", hsmmc2_internal_input_clk, },
- { "isee,omap3-igep0020", omap3_igep0020_legacy_init, },
+ { "isee,omap3-igep0020-rev-f", omap3_igep0020_rev_f_legacy_init, },
+ { "isee,omap3-igep0030-rev-g", omap3_igep0030_rev_g_legacy_init, },
{ "ti,omap3-evm-37xx", omap3_evm_legacy_init, },
{ "ti,omap3-zoom3", omap3_zoom_legacy_init, },
{ "ti,am3517-evm", am3517_evm_legacy_init, },
#include <linux/delay.h>
#include <linux/slab.h>
#include <linux/omap-dma.h>
+#include <linux/omap-gpmc.h>
#include <linux/platform_data/gpio-omap.h>
#include <trace/events/power.h>
#include "common.h"
#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
-#include "gpmc.h"
#include "prm-regbits-34xx.h"
#include "prm3xxx.h"
#include "pm.h"
struct list_head node;
};
+/**
+ * struct static_dep_map - Static dependency map
+ * @from: from clockdomain
+ * @to: to clockdomain
+ */
+struct static_dep_map {
+ const char *from;
+ const char *to;
+};
+
static u32 cpu_suspend_state = PWRDM_POWER_OFF;
static LIST_HEAD(pwrst_list);
omap_do_wfi();
}
-/**
- * omap4_init_static_deps - Add OMAP4 static dependencies
- *
- * Add needed static clockdomain dependencies on OMAP4 devices.
- * Return: 0 on success or 'err' on failures
+/*
+ * The dynamic dependency between MPUSS -> MEMIF and
+ * MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as
+ * expected. The hardware recommendation is to enable static
+ * dependencies for these to avoid system lock ups or random crashes.
+ * The L4 wakeup depedency is added to workaround the OCP sync hardware
+ * BUG with 32K synctimer which lead to incorrect timer value read
+ * from the 32K counter. The BUG applies for GPTIMER1 and WDT2 which
+ * are part of L4 wakeup clockdomain.
*/
-static inline int omap4_init_static_deps(void)
-{
- struct clockdomain *emif_clkdm, *mpuss_clkdm, *l3_1_clkdm;
- struct clockdomain *ducati_clkdm, *l3_2_clkdm;
- int ret = 0;
-
- if (omap_rev() == OMAP4430_REV_ES1_0) {
- WARN(1, "Power Management not supported on OMAP4430 ES1.0\n");
- return -ENODEV;
- }
-
- pr_err("Power Management for TI OMAP4.\n");
- /*
- * OMAP4 chip PM currently works only with certain (newer)
- * versions of bootloaders. This is due to missing code in the
- * kernel to properly reset and initialize some devices.
- * http://www.spinics.net/lists/arm-kernel/msg218641.html
- */
- pr_warn("OMAP4 PM: u-boot >= v2012.07 is required for full PM support\n");
-
- ret = pwrdm_for_each(pwrdms_setup, NULL);
- if (ret) {
- pr_err("Failed to setup powerdomains\n");
- return ret;
- }
-
- /*
- * The dynamic dependency between MPUSS -> MEMIF and
- * MPUSS -> L4_PER/L3_* and DUCATI -> L3_* doesn't work as
- * expected. The hardware recommendation is to enable static
- * dependencies for these to avoid system lock ups or random crashes.
- * The L4 wakeup depedency is added to workaround the OCP sync hardware
- * BUG with 32K synctimer which lead to incorrect timer value read
- * from the 32K counter. The BUG applies for GPTIMER1 and WDT2 which
- * are part of L4 wakeup clockdomain.
- */
- mpuss_clkdm = clkdm_lookup("mpuss_clkdm");
- emif_clkdm = clkdm_lookup("l3_emif_clkdm");
- l3_1_clkdm = clkdm_lookup("l3_1_clkdm");
- l3_2_clkdm = clkdm_lookup("l3_2_clkdm");
- ducati_clkdm = clkdm_lookup("ducati_clkdm");
- if ((!mpuss_clkdm) || (!emif_clkdm) || (!l3_1_clkdm) ||
- (!l3_2_clkdm) || (!ducati_clkdm))
- return -EINVAL;
-
- ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm);
- ret |= clkdm_add_wkdep(mpuss_clkdm, l3_1_clkdm);
- ret |= clkdm_add_wkdep(mpuss_clkdm, l3_2_clkdm);
- ret |= clkdm_add_wkdep(ducati_clkdm, l3_1_clkdm);
- ret |= clkdm_add_wkdep(ducati_clkdm, l3_2_clkdm);
- if (ret) {
- pr_err("Failed to add MPUSS -> L3/EMIF/L4PER, DUCATI -> L3 wakeup dependency\n");
- return -EINVAL;
- }
+static const struct static_dep_map omap4_static_dep_map[] = {
+ {.from = "mpuss_clkdm", .to = "l3_emif_clkdm"},
+ {.from = "mpuss_clkdm", .to = "l3_1_clkdm"},
+ {.from = "mpuss_clkdm", .to = "l3_2_clkdm"},
+ {.from = "ducati_clkdm", .to = "l3_1_clkdm"},
+ {.from = "ducati_clkdm", .to = "l3_2_clkdm"},
+ {.from = NULL} /* TERMINATION */
+};
- return ret;
-}
+static const struct static_dep_map omap5_dra7_static_dep_map[] = {
+ {.from = "mpu_clkdm", .to = "emif_clkdm"},
+ {.from = NULL} /* TERMINATION */
+};
/**
- * omap5_dra7_init_static_deps - Init static clkdm dependencies on OMAP5 and
- * DRA7
- *
- * The dynamic dependency between MPUSS -> EMIF is broken and has
- * not worked as expected. The hardware recommendation is to
- * enable static dependencies for these to avoid system
- * lock ups or random crashes.
+ * omap4plus_init_static_deps() - Initialize a static dependency map
+ * @map: Mapping of clock domains
*/
-static inline int omap5_dra7_init_static_deps(void)
+static inline int omap4plus_init_static_deps(const struct static_dep_map *map)
{
- struct clockdomain *mpuss_clkdm, *emif_clkdm;
int ret;
+ struct clockdomain *from, *to;
+
+ if (!map)
+ return 0;
- mpuss_clkdm = clkdm_lookup("mpu_clkdm");
- emif_clkdm = clkdm_lookup("emif_clkdm");
- if (!mpuss_clkdm || !emif_clkdm)
- return -EINVAL;
+ while (map->from) {
+ from = clkdm_lookup(map->from);
+ to = clkdm_lookup(map->to);
+ if (!from || !to) {
+ pr_err("Failed lookup %s or %s for wakeup dependency\n",
+ map->from, map->to);
+ return -EINVAL;
+ }
+ ret = clkdm_add_wkdep(from, to);
+ if (ret) {
+ pr_err("Failed to add %s -> %s wakeup dependency(%d)\n",
+ map->from, map->to, ret);
+ return ret;
+ }
- ret = clkdm_add_wkdep(mpuss_clkdm, emif_clkdm);
- if (ret)
- pr_err("Failed to add MPUSS -> EMIF wakeup dependency\n");
+ map++;
+ };
- return ret;
+ return 0;
}
/**
pr_info("Power Management for TI OMAP4+ devices.\n");
+ /*
+ * OMAP4 chip PM currently works only with certain (newer)
+ * versions of bootloaders. This is due to missing code in the
+ * kernel to properly reset and initialize some devices.
+ * http://www.spinics.net/lists/arm-kernel/msg218641.html
+ */
+ if (cpu_is_omap44xx())
+ pr_warn("OMAP4 PM: u-boot >= v2012.07 is required for full PM support\n");
+
ret = pwrdm_for_each(pwrdms_setup, NULL);
if (ret) {
pr_err("Failed to setup powerdomains.\n");
}
if (cpu_is_omap44xx())
- ret = omap4_init_static_deps();
+ ret = omap4plus_init_static_deps(omap4_static_dep_map);
else if (soc_is_omap54xx() || soc_is_dra7xx())
- ret = omap5_dra7_init_static_deps();
+ ret = omap4plus_init_static_deps(omap5_dra7_static_dep_map);
if (ret) {
pr_err("Failed to initialise static dependencies.\n");
* PRM_HAS_VOLTAGE: has voltage domains
*/
#define PRM_HAS_IO_WAKEUP (1 << 0)
+#define PRM_HAS_VOLTAGE (1 << 1)
/*
* MAX_MODULE_SOFTRESET_WAIT: Maximum microseconds to wait for OMAP
* @was_any_context_lost_old: ptr to the SoC PRM context loss test fn
* @clear_context_loss_flags_old: ptr to the SoC PRM context loss flag clear fn
* @late_init: ptr to the late init function
+ * @assert_hardreset: ptr to the SoC PRM hardreset assert impl
+ * @deassert_hardreset: ptr to the SoC PRM hardreset deassert impl
*
* XXX @was_any_context_lost_old and @clear_context_loss_flags_old are
* deprecated.
bool (*was_any_context_lost_old)(u8 part, s16 inst, u16 idx);
void (*clear_context_loss_flags_old)(u8 part, s16 inst, u16 idx);
int (*late_init)(void);
+ int (*assert_hardreset)(u8 shift, u8 part, s16 prm_mod, u16 offset);
+ int (*deassert_hardreset)(u8 shift, u8 st_shift, u8 part, s16 prm_mod,
+ u16 offset, u16 st_offset);
+ int (*is_hardreset_asserted)(u8 shift, u8 part, s16 prm_mod,
+ u16 offset);
+ void (*reset_system)(void);
};
extern int prm_register(struct prm_ll_data *pld);
extern int prm_unregister(struct prm_ll_data *pld);
+int omap_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod, u16 offset);
+int omap_prm_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 prm_mod,
+ u16 offset, u16 st_offset);
+int omap_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset);
extern u32 prm_read_reset_sources(void);
extern bool prm_was_any_context_lost_old(u8 part, s16 inst, u16 idx);
extern void prm_clear_context_loss_flags_old(u8 part, s16 inst, u16 idx);
+void omap_prm_reset_system(void);
+
+void omap_prm_reconfigure_io_chain(void);
#endif
* Set the DPLL reset bit, which should reboot the SoC. This is the
* recommended way to restart the SoC. No return value.
*/
-void omap2xxx_prm_dpll_reset(void)
+static void omap2xxx_prm_dpll_reset(void)
{
omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, WKUP_MOD,
OMAP2_RM_RSTCTRL);
static struct prm_ll_data omap2xxx_prm_ll_data = {
.read_reset_sources = &omap2xxx_prm_read_reset_sources,
+ .assert_hardreset = &omap2_prm_assert_hardreset,
+ .deassert_hardreset = &omap2_prm_deassert_hardreset,
+ .is_hardreset_asserted = &omap2_prm_is_hardreset_asserted,
+ .reset_system = &omap2xxx_prm_dpll_reset,
};
int __init omap2xxx_prm_init(void)
extern int omap2xxx_clkdm_sleep(struct clockdomain *clkdm);
extern int omap2xxx_clkdm_wakeup(struct clockdomain *clkdm);
-extern void omap2xxx_prm_dpll_reset(void);
void omap2xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 wkst_mask);
extern int __init omap2xxx_prm_init(void);
/**
* omap2_prm_is_hardreset_asserted - read the HW reset line state of
* submodules contained in the hwmod module
- * @prm_mod: PRM submodule base (e.g. CORE_MOD)
* @shift: register bit shift corresponding to the reset line to check
+ * @part: PRM partition, ignored for OMAP2
+ * @prm_mod: PRM submodule base (e.g. CORE_MOD)
+ * @offset: register offset, ignored for OMAP2
*
* Returns 1 if the (sub)module hardreset line is currently asserted,
* 0 if the (sub)module hardreset line is not currently asserted, or
* -EINVAL if called while running on a non-OMAP2/3 chip.
*/
-int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift)
+int omap2_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset)
{
return omap2_prm_read_mod_bits_shift(prm_mod, OMAP2_RM_RSTCTRL,
(1 << shift));
/**
* omap2_prm_assert_hardreset - assert the HW reset line of a submodule
- * @prm_mod: PRM submodule base (e.g. CORE_MOD)
* @shift: register bit shift corresponding to the reset line to assert
+ * @part: PRM partition, ignored for OMAP2
+ * @prm_mod: PRM submodule base (e.g. CORE_MOD)
+ * @offset: register offset, ignored for OMAP2
*
* Some IPs like dsp or iva contain processors that require an HW
* reset line to be asserted / deasserted in order to fully enable the
* place the submodule into reset. Returns 0 upon success or -EINVAL
* upon an argument error.
*/
-int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift)
+int omap2_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod, u16 offset)
{
u32 mask;
* @prm_mod: PRM submodule base (e.g. CORE_MOD)
* @rst_shift: register bit shift corresponding to the reset line to deassert
* @st_shift: register bit shift for the status of the deasserted submodule
+ * @part: PRM partition, not used for OMAP2
+ * @prm_mod: PRM submodule base (e.g. CORE_MOD)
+ * @rst_offset: reset register offset, not used for OMAP2
+ * @st_offset: reset status register offset, not used for OMAP2
*
* Some IPs like dsp or iva contain processors that require an HW
* reset line to be asserted / deasserted in order to fully enable the
* -EINVAL upon an argument error, -EEXIST if the submodule was already out
* of reset, or -EBUSY if the submodule did not exit reset promptly.
*/
-int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift)
+int omap2_prm_deassert_hardreset(u8 rst_shift, u8 st_shift, u8 part,
+ s16 prm_mod, u16 rst_offset, u16 st_offset)
{
u32 rst, st;
int c;
}
/* These omap2_ PRM functions apply to both OMAP2 and 3 */
-extern int omap2_prm_is_hardreset_asserted(s16 prm_mod, u8 shift);
-extern int omap2_prm_assert_hardreset(s16 prm_mod, u8 shift);
-extern int omap2_prm_deassert_hardreset(s16 prm_mod, u8 rst_shift, u8 st_shift);
+int omap2_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset);
+int omap2_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod,
+ u16 offset);
+int omap2_prm_deassert_hardreset(u8 rst_shift, u8 st_shift, u8 part,
+ s16 prm_mod, u16 reset_offset,
+ u16 st_offset);
extern int omap2_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst);
extern int omap2_pwrdm_read_next_pwrst(struct powerdomain *pwrdm);
#include "prm33xx.h"
#include "prm-regbits-33xx.h"
+#define AM33XX_PRM_RSTCTRL_OFFSET 0x0000
+
+#define AM33XX_RST_GLOBAL_WARM_SW_MASK (1 << 0)
+
/* Read a register in a PRM instance */
-u32 am33xx_prm_read_reg(s16 inst, u16 idx)
+static u32 am33xx_prm_read_reg(s16 inst, u16 idx)
{
return readl_relaxed(prm_base + inst + idx);
}
/* Write into a register in a PRM instance */
-void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx)
+static void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx)
{
writel_relaxed(val, prm_base + inst + idx);
}
/* Read-modify-write a register in PRM. Caller must lock */
-u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx)
+static u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx)
{
u32 v;
* am33xx_prm_is_hardreset_asserted - read the HW reset line state of
* submodules contained in the hwmod module
* @shift: register bit shift corresponding to the reset line to check
+ * @part: PRM partition, ignored for AM33xx
* @inst: CM instance register offset (*_INST macro)
* @rstctrl_offs: RM_RSTCTRL register address offset for this module
*
* 0 if the (sub)module hardreset line is not currently asserted, or
* -EINVAL upon parameter error.
*/
-int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst, u16 rstctrl_offs)
+static int am33xx_prm_is_hardreset_asserted(u8 shift, u8 part, s16 inst,
+ u16 rstctrl_offs)
{
u32 v;
/**
* am33xx_prm_assert_hardreset - assert the HW reset line of a submodule
* @shift: register bit shift corresponding to the reset line to assert
+ * @part: CM partition, ignored for AM33xx
* @inst: CM instance register offset (*_INST macro)
* @rstctrl_reg: RM_RSTCTRL register address for this module
*
* place the submodule into reset. Returns 0 upon success or -EINVAL
* upon an argument error.
*/
-int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs)
+static int am33xx_prm_assert_hardreset(u8 shift, u8 part, s16 inst,
+ u16 rstctrl_offs)
{
u32 mask = 1 << shift;
* am33xx_prm_deassert_hardreset - deassert a submodule hardreset line and
* wait
* @shift: register bit shift corresponding to the reset line to deassert
+ * @st_shift: reset status register bit shift corresponding to the reset line
+ * @part: PRM partition, not used for AM33xx
* @inst: CM instance register offset (*_INST macro)
* @rstctrl_reg: RM_RSTCTRL register address for this module
* @rstst_reg: RM_RSTST register address for this module
* -EINVAL upon an argument error, -EEXIST if the submodule was already out
* of reset, or -EBUSY if the submodule did not exit reset promptly.
*/
-int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, s16 inst,
- u16 rstctrl_offs, u16 rstst_offs)
+static int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, u8 part,
+ s16 inst, u16 rstctrl_offs,
+ u16 rstst_offs)
{
int c;
u32 mask = 1 << st_shift;
/* Check the current status to avoid de-asserting the line twice */
- if (am33xx_prm_is_hardreset_asserted(shift, inst, rstctrl_offs) == 0)
+ if (am33xx_prm_is_hardreset_asserted(shift, 0, inst, rstctrl_offs) == 0)
return -EEXIST;
/* Clear the reset status by writing 1 to the status bit */
am33xx_prm_rmw_reg_bits(mask, 0, inst, rstctrl_offs);
/* wait the status to be set */
- omap_test_timeout(am33xx_prm_is_hardreset_asserted(st_shift, inst,
+ omap_test_timeout(am33xx_prm_is_hardreset_asserted(st_shift, 0, inst,
rstst_offs),
MAX_MODULE_HARDRESET_WAIT, c);
return 0;
}
+/**
+ * am33xx_prm_global_warm_sw_reset - reboot the device via warm reset
+ *
+ * Immediately reboots the device through warm reset.
+ */
+static void am33xx_prm_global_warm_sw_reset(void)
+{
+ am33xx_prm_rmw_reg_bits(AM33XX_RST_GLOBAL_WARM_SW_MASK,
+ AM33XX_RST_GLOBAL_WARM_SW_MASK,
+ AM33XX_PRM_DEVICE_MOD,
+ AM33XX_PRM_RSTCTRL_OFFSET);
+
+ /* OCP barrier */
+ (void)am33xx_prm_read_reg(AM33XX_PRM_DEVICE_MOD,
+ AM33XX_PRM_RSTCTRL_OFFSET);
+}
+
struct pwrdm_ops am33xx_pwrdm_operations = {
.pwrdm_set_next_pwrst = am33xx_pwrdm_set_next_pwrst,
.pwrdm_read_next_pwrst = am33xx_pwrdm_read_next_pwrst,
.pwrdm_wait_transition = am33xx_pwrdm_wait_transition,
.pwrdm_has_voltdm = am33xx_check_vcvp,
};
+
+static struct prm_ll_data am33xx_prm_ll_data = {
+ .assert_hardreset = am33xx_prm_assert_hardreset,
+ .deassert_hardreset = am33xx_prm_deassert_hardreset,
+ .is_hardreset_asserted = am33xx_prm_is_hardreset_asserted,
+ .reset_system = am33xx_prm_global_warm_sw_reset,
+};
+
+int __init am33xx_prm_init(void)
+{
+ return prm_register(&am33xx_prm_ll_data);
+}
+
+static void __exit am33xx_prm_exit(void)
+{
+ prm_unregister(&am33xx_prm_ll_data);
+}
+__exitcall(am33xx_prm_exit);
#define AM33XX_PM_CEFUSE_PWRSTST AM33XX_PRM_REGADDR(AM33XX_PRM_CEFUSE_MOD, 0x0004)
#ifndef __ASSEMBLER__
-extern u32 am33xx_prm_read_reg(s16 inst, u16 idx);
-extern void am33xx_prm_write_reg(u32 val, s16 inst, u16 idx);
-extern u32 am33xx_prm_rmw_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
-extern void am33xx_prm_global_warm_sw_reset(void);
-extern int am33xx_prm_is_hardreset_asserted(u8 shift, s16 inst,
- u16 rstctrl_offs);
-extern int am33xx_prm_assert_hardreset(u8 shift, s16 inst, u16 rstctrl_offs);
-extern int am33xx_prm_deassert_hardreset(u8 shift, u8 st_shift, s16 inst,
- u16 rstctrl_offs, u16 rstst_offs);
+int am33xx_prm_init(void);
+
#endif /* ASSEMBLER */
#endif
#include "cm3xxx.h"
#include "cm-regbits-34xx.h"
+static void omap3xxx_prm_read_pending_irqs(unsigned long *events);
+static void omap3xxx_prm_ocp_barrier(void);
+static void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
+static void omap3xxx_prm_restore_irqen(u32 *saved_mask);
+
static const struct omap_prcm_irq omap3_prcm_irqs[] = {
OMAP_PRCM_IRQ("wkup", 0, 0),
OMAP_PRCM_IRQ("io", 9, 1),
* recommended way to restart the SoC, considering Errata i520. No
* return value.
*/
-void omap3xxx_prm_dpll3_reset(void)
+static void omap3xxx_prm_dpll3_reset(void)
{
omap2_prm_set_mod_reg_bits(OMAP_RST_DPLL3_MASK, OMAP3430_GR_MOD,
OMAP2_RM_RSTCTRL);
* MPU IRQs, and store the result into the u32 pointed to by @events.
* No return value.
*/
-void omap3xxx_prm_read_pending_irqs(unsigned long *events)
+static void omap3xxx_prm_read_pending_irqs(unsigned long *events)
{
u32 mask, st;
* block, to avoid race conditions after acknowledging or clearing IRQ
* bits. No return value.
*/
-void omap3xxx_prm_ocp_barrier(void)
+static void omap3xxx_prm_ocp_barrier(void)
{
omap2_prm_read_mod_reg(OCP_MOD, OMAP3_PRM_REVISION_OFFSET);
}
* returning; otherwise, spurious interrupts might occur. No return
* value.
*/
-void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask)
+static void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask)
{
saved_mask[0] = omap2_prm_read_mod_reg(OCP_MOD,
OMAP3_PRM_IRQENABLE_MPU_OFFSET);
* barrier should be needed here; any pending PRM interrupts will fire
* once the writes reach the PRM. No return value.
*/
-void omap3xxx_prm_restore_irqen(u32 *saved_mask)
+static void omap3xxx_prm_restore_irqen(u32 *saved_mask)
{
omap2_prm_write_mod_reg(saved_mask[0], OCP_MOD,
OMAP3_PRM_IRQENABLE_MPU_OFFSET);
* The ST_IO_CHAIN bit does not exist in 3430 before es3.1. The only
* thing we can do is toggle EN_IO bit for earlier omaps.
*/
-void omap3430_pre_es3_1_reconfigure_io_chain(void)
+static void omap3430_pre_es3_1_reconfigure_io_chain(void)
{
omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD,
PM_WKEN);
* deasserting WUCLKIN and clearing the ST_IO_CHAIN WKST bit. No
* return value. These registers are only available in 3430 es3.1 and later.
*/
-void omap3_prm_reconfigure_io_chain(void)
+static void omap3_prm_reconfigure_io_chain(void)
{
int i = 0;
omap2_prm_read_mod_reg(WKUP_MOD, PM_WKST);
}
-/**
- * omap3xxx_prm_reconfigure_io_chain - reconfigure I/O chain
- */
-void omap3xxx_prm_reconfigure_io_chain(void)
-{
- if (omap3_prcm_irq_setup.reconfigure_io_chain)
- omap3_prcm_irq_setup.reconfigure_io_chain();
-}
-
/**
* omap3xxx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
*
static struct prm_ll_data omap3xxx_prm_ll_data = {
.read_reset_sources = &omap3xxx_prm_read_reset_sources,
.late_init = &omap3xxx_prm_late_init,
+ .assert_hardreset = &omap2_prm_assert_hardreset,
+ .deassert_hardreset = &omap2_prm_deassert_hardreset,
+ .is_hardreset_asserted = &omap2_prm_is_hardreset_asserted,
+ .reset_system = &omap3xxx_prm_dpll3_reset,
};
int __init omap3xxx_prm_init(void)
extern void omap3_prm_vcvp_write(u32 val, u8 offset);
extern u32 omap3_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
-#ifdef CONFIG_ARCH_OMAP3
-void omap3xxx_prm_reconfigure_io_chain(void);
-#else
-static inline void omap3xxx_prm_reconfigure_io_chain(void)
-{
-}
-#endif
-
-/* PRM interrupt-related functions */
-extern void omap3xxx_prm_read_pending_irqs(unsigned long *events);
-extern void omap3xxx_prm_ocp_barrier(void);
-extern void omap3xxx_prm_save_and_clear_irqen(u32 *saved_mask);
-extern void omap3xxx_prm_restore_irqen(u32 *saved_mask);
-
-extern void omap3xxx_prm_dpll3_reset(void);
-
extern int __init omap3xxx_prm_init(void);
extern u32 omap3xxx_prm_get_reset_sources(void);
int omap3xxx_prm_clear_mod_irqs(s16 module, u8 regs, u32 ignore_bits);
/* Static data */
+static void omap44xx_prm_read_pending_irqs(unsigned long *events);
+static void omap44xx_prm_ocp_barrier(void);
+static void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask);
+static void omap44xx_prm_restore_irqen(u32 *saved_mask);
+static void omap44xx_prm_reconfigure_io_chain(void);
+
static const struct omap_prcm_irq omap4_prcm_irqs[] = {
OMAP_PRCM_IRQ("io", 9, 1),
};
/* PRM low-level functions */
/* Read a register in a CM/PRM instance in the PRM module */
-u32 omap4_prm_read_inst_reg(s16 inst, u16 reg)
+static u32 omap4_prm_read_inst_reg(s16 inst, u16 reg)
{
return readl_relaxed(prm_base + inst + reg);
}
/* Write into a register in a CM/PRM instance in the PRM module */
-void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 reg)
+static void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 reg)
{
writel_relaxed(val, prm_base + inst + reg);
}
/* Read-modify-write a register in a PRM module. Caller must lock */
-u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg)
+static u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg)
{
u32 v;
* MPU IRQs, and store the result into the two u32s pointed to by @events.
* No return value.
*/
-void omap44xx_prm_read_pending_irqs(unsigned long *events)
+static void omap44xx_prm_read_pending_irqs(unsigned long *events)
{
events[0] = _read_pending_irq_reg(OMAP4_PRM_IRQENABLE_MPU_OFFSET,
OMAP4_PRM_IRQSTATUS_MPU_OFFSET);
* block, to avoid race conditions after acknowledging or clearing IRQ
* bits. No return value.
*/
-void omap44xx_prm_ocp_barrier(void)
+static void omap44xx_prm_ocp_barrier(void)
{
omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
OMAP4_REVISION_PRM_OFFSET);
* interrupts reaches the PRM before returning; otherwise, spurious
* interrupts might occur. No return value.
*/
-void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask)
+static void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask)
{
saved_mask[0] =
omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
* No OCP barrier should be needed here; any pending PRM interrupts will fire
* once the writes reach the PRM. No return value.
*/
-void omap44xx_prm_restore_irqen(u32 *saved_mask)
+static void omap44xx_prm_restore_irqen(u32 *saved_mask)
{
omap4_prm_write_inst_reg(saved_mask[0], OMAP4430_PRM_OCP_SOCKET_INST,
OMAP4_PRM_IRQENABLE_MPU_OFFSET);
* deasserting WUCLKIN and waiting for WUCLKOUT to be deasserted.
* No return value. XXX Are the final two steps necessary?
*/
-void omap44xx_prm_reconfigure_io_chain(void)
+static void omap44xx_prm_reconfigure_io_chain(void)
{
int i = 0;
s32 inst = omap4_prmst_get_prm_dev_inst();
static int omap4_check_vcvp(void)
{
- /* No VC/VP on dra7xx devices */
- if (soc_is_dra7xx())
- return 0;
+ if (prm_features & PRM_HAS_VOLTAGE)
+ return 1;
- return 1;
+ return 0;
}
struct pwrdm_ops omap4_pwrdm_operations = {
.was_any_context_lost_old = &omap44xx_prm_was_any_context_lost_old,
.clear_context_loss_flags_old = &omap44xx_prm_clear_context_loss_flags_old,
.late_init = &omap44xx_prm_late_init,
+ .assert_hardreset = omap4_prminst_assert_hardreset,
+ .deassert_hardreset = omap4_prminst_deassert_hardreset,
+ .is_hardreset_asserted = omap4_prminst_is_hardreset_asserted,
+ .reset_system = omap4_prminst_global_warm_sw_reset,
};
int __init omap44xx_prm_init(void)
if (cpu_is_omap44xx() || soc_is_omap54xx() || soc_is_dra7xx())
prm_features |= PRM_HAS_IO_WAKEUP;
+ if (!soc_is_dra7xx())
+ prm_features |= PRM_HAS_VOLTAGE;
+
return prm_register(&omap44xx_prm_ll_data);
}
/* Function prototypes */
#ifndef __ASSEMBLER__
-extern u32 omap4_prm_read_inst_reg(s16 inst, u16 idx);
-extern void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 idx);
-extern u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 idx);
-
/* OMAP4/OMAP5-specific VP functions */
u32 omap4_prm_vp_check_txdone(u8 vp_id);
void omap4_prm_vp_clear_txdone(u8 vp_id);
extern void omap4_prm_vcvp_write(u32 val, u8 offset);
extern u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset);
-#if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) || \
- defined(CONFIG_SOC_DRA7XX) || defined(CONFIG_SOC_AM43XX)
-void omap44xx_prm_reconfigure_io_chain(void);
-#else
-static inline void omap44xx_prm_reconfigure_io_chain(void)
-{
-}
-#endif
-
-/* PRM interrupt-related functions */
-extern void omap44xx_prm_read_pending_irqs(unsigned long *events);
-extern void omap44xx_prm_ocp_barrier(void);
-extern void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask);
-extern void omap44xx_prm_restore_irqen(u32 *saved_mask);
-
extern int __init omap44xx_prm_init(void);
extern u32 omap44xx_prm_get_reset_sources(void);
__func__);
}
+/**
+ * omap_prm_assert_hardreset - assert hardreset for an IP block
+ * @shift: register bit shift corresponding to the reset line
+ * @part: PRM partition
+ * @prm_mod: PRM submodule base or instance offset
+ * @offset: register offset
+ *
+ * Asserts a hardware reset line for an IP block.
+ */
+int omap_prm_assert_hardreset(u8 shift, u8 part, s16 prm_mod, u16 offset)
+{
+ if (!prm_ll_data->assert_hardreset) {
+ WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ return prm_ll_data->assert_hardreset(shift, part, prm_mod, offset);
+}
+
+/**
+ * omap_prm_deassert_hardreset - deassert hardreset for an IP block
+ * @shift: register bit shift corresponding to the reset line
+ * @st_shift: reset status bit shift corresponding to the reset line
+ * @part: PRM partition
+ * @prm_mod: PRM submodule base or instance offset
+ * @offset: register offset
+ * @st_offset: status register offset
+ *
+ * Deasserts a hardware reset line for an IP block.
+ */
+int omap_prm_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 prm_mod,
+ u16 offset, u16 st_offset)
+{
+ if (!prm_ll_data->deassert_hardreset) {
+ WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ return prm_ll_data->deassert_hardreset(shift, st_shift, part, prm_mod,
+ offset, st_offset);
+}
+
+/**
+ * omap_prm_is_hardreset_asserted - check the hardreset status for an IP block
+ * @shift: register bit shift corresponding to the reset line
+ * @part: PRM partition
+ * @prm_mod: PRM submodule base or instance offset
+ * @offset: register offset
+ *
+ * Checks if a hardware reset line for an IP block is enabled or not.
+ */
+int omap_prm_is_hardreset_asserted(u8 shift, u8 part, s16 prm_mod, u16 offset)
+{
+ if (!prm_ll_data->is_hardreset_asserted) {
+ WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+ __func__);
+ return -EINVAL;
+ }
+
+ return prm_ll_data->is_hardreset_asserted(shift, part, prm_mod, offset);
+}
+
+/**
+ * omap_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
+ *
+ * Clear any previously-latched I/O wakeup events and ensure that the
+ * I/O wakeup gates are aligned with the current mux settings.
+ * Calls SoC specific I/O chain reconfigure function if available,
+ * otherwise does nothing.
+ */
+void omap_prm_reconfigure_io_chain(void)
+{
+ if (!prcm_irq_setup || !prcm_irq_setup->reconfigure_io_chain)
+ return;
+
+ prcm_irq_setup->reconfigure_io_chain();
+}
+
+/**
+ * omap_prm_reset_system - trigger global SW reset
+ *
+ * Triggers SoC specific global warm reset to reboot the device.
+ */
+void omap_prm_reset_system(void)
+{
+ if (!prm_ll_data->reset_system) {
+ WARN_ONCE(1, "prm: %s: no mapping function defined\n",
+ __func__);
+ return;
+ }
+
+ prm_ll_data->reset_system();
+
+ while (1)
+ cpu_relax();
+}
+
/**
* prm_register - register per-SoC low-level data with the PRM
* @pld: low-level per-SoC OMAP PRM data & function pointers to register
/**
* omap4_prminst_deassert_hardreset - deassert a submodule hardreset line and
* wait
- * @rstctrl_reg: RM_RSTCTRL register address for this module
* @shift: register bit shift corresponding to the reset line to deassert
+ * @st_shift: status bit offset, not used for OMAP4+
+ * @part: PRM partition
+ * @inst: PRM instance offset
+ * @rstctrl_offs: reset register offset
+ * @st_offs: reset status register offset, not used for OMAP4+
*
* Some IPs like dsp, ipu or iva contain processors that require an HW
* reset line to be asserted / deasserted in order to fully enable the
* -EINVAL upon an argument error, -EEXIST if the submodule was already out
* of reset, or -EBUSY if the submodule did not exit reset promptly.
*/
-int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst,
- u16 rstctrl_offs)
+int omap4_prminst_deassert_hardreset(u8 shift, u8 st_shift, u8 part, s16 inst,
+ u16 rstctrl_offs, u16 st_offs)
{
int c;
u32 mask = 1 << shift;
u16 rstctrl_offs);
extern int omap4_prminst_assert_hardreset(u8 shift, u8 part, s16 inst,
u16 rstctrl_offs);
-extern int omap4_prminst_deassert_hardreset(u8 shift, u8 part, s16 inst,
- u16 rstctrl_offs);
+int omap4_prminst_deassert_hardreset(u8 shift, u8 st_shift, u8 part,
+ s16 inst, u16 rstctrl_offs,
+ u16 rstst_offs);
extern void omap_prm_base_init(void);
omap_up.dma_rx_timeout = info->dma_rx_timeout;
omap_up.dma_rx_poll_rate = info->dma_rx_poll_rate;
omap_up.autosuspend_timeout = info->autosuspend_timeout;
- omap_up.DTR_gpio = info->DTR_gpio;
- omap_up.DTR_inverted = info->DTR_inverted;
- omap_up.DTR_present = info->DTR_present;
pdata = &omap_up;
pdata_size = sizeof(struct omap_uart_port_info);
comment "Intel/Marvell Dev Platforms (sorted by hardware release time)"
+config MACH_PXA27X_DT
+ bool "Support PXA27x platforms from device tree"
+ select CPU_PXA27x
+ select POWER_SUPPLY
+ select PXA27x
+ select USE_OF
+ help
+ Include support for Marvell PXA27x based platforms using
+ the device tree. Needn't select any other machine while
+ MACH_PXA27X_DT is enabled.
+
config MACH_PXA3XX_DT
bool "Support PXA3xx platforms from device tree"
select CPU_PXA300
# Device Tree support
obj-$(CONFIG_MACH_PXA3XX_DT) += pxa-dt.o
+obj-$(CONFIG_MACH_PXA27X_DT) += pxa-dt.o
# Intel/Marvell Dev Platforms
obj-$(CONFIG_ARCH_LUBBOCK) += lubbock.o
err = gpio_request(GPIO11_NAND_CS, "NAND CS");
if (err) {
- pr_warning("EM-X270: failed to request NAND CS gpio\n");
+ pr_warn("EM-X270: failed to request NAND CS gpio\n");
return;
}
err = gpio_request(nand_rb, "NAND R/B");
if (err) {
- pr_warning("EM-X270: failed to request NAND R/B gpio\n");
+ pr_warn("EM-X270: failed to request NAND R/B gpio\n");
gpio_free(GPIO11_NAND_CS);
return;
}
struct irq_data;
-extern void pxa_timer_init(void);
-
-extern void __init pxa_map_io(void);
-
extern unsigned int get_clk_frequency_khz(int info);
+extern void __init pxa_dt_irq_init(int (*fn)(struct irq_data *,
+ unsigned int));
+extern void __init pxa_map_io(void);
+extern void pxa_timer_init(void);
#define SET_BANK(__nr,__start,__size) \
mi->bank[__nr].start = (__start), \
#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
+#define pxa25x_handle_irq icip_handle_irq
+extern void __init pxa25x_init_irq(void);
+extern void __init pxa25x_map_io(void);
+extern void __init pxa26x_init_irq(void);
+
+#define pxa27x_handle_irq ichp_handle_irq
+extern void __init pxa27x_dt_init_irq(void);
+extern unsigned pxa27x_get_clk_frequency_khz(int);
+extern void __init pxa27x_init_irq(void);
+extern void __init pxa27x_map_io(void);
+
+#define pxa3xx_handle_irq ichp_handle_irq
+extern void __init pxa3xx_dt_init_irq(void);
+extern void __init pxa3xx_init_irq(void);
+extern void __init pxa3xx_map_io(void);
+
+extern struct syscore_ops pxa_irq_syscore_ops;
+extern struct syscore_ops pxa2xx_mfp_syscore_ops;
+extern struct syscore_ops pxa3xx_mfp_syscore_ops;
+
+void __init pxa_set_ffuart_info(void *info);
+void __init pxa_set_btuart_info(void *info);
+void __init pxa_set_stuart_info(void *info);
+void __init pxa_set_hwuart_info(void *info);
+
+void pxa_restart(enum reboot_mode, const char *);
+
+#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
+extern void pxa2xx_clear_reset_status(unsigned int);
+#else
+static inline void pxa2xx_clear_reset_status(unsigned int mask) {}
+#endif
+
+/*
+ * Once fully converted to the clock framework, all these functions should be
+ * removed, and replaced with a clk_get(NULL, "core").
+ */
#ifdef CONFIG_PXA25x
extern unsigned pxa25x_get_clk_frequency_khz(int);
#else
#endif
#ifdef CONFIG_PXA27x
-extern unsigned pxa27x_get_clk_frequency_khz(int);
#else
#define pxa27x_get_clk_frequency_khz(x) (0)
#endif
-#if defined(CONFIG_PXA25x) || defined(CONFIG_PXA27x)
-extern void pxa2xx_clear_reset_status(unsigned int);
-#else
-static inline void pxa2xx_clear_reset_status(unsigned int mask) {}
-#endif
-
#ifdef CONFIG_PXA3xx
-extern unsigned pxa3xx_get_clk_frequency_khz(int);
+extern unsigned pxa3xx_get_clk_frequency_khz(int);
#else
#define pxa3xx_get_clk_frequency_khz(x) (0)
#endif
-
-extern struct syscore_ops pxa_irq_syscore_ops;
-extern struct syscore_ops pxa2xx_mfp_syscore_ops;
-extern struct syscore_ops pxa3xx_mfp_syscore_ops;
-
-void __init pxa_set_ffuart_info(void *info);
-void __init pxa_set_btuart_info(void *info);
-void __init pxa_set_stuart_info(void *info);
-void __init pxa_set_hwuart_info(void *info);
-
-void pxa_restart(enum reboot_mode, const char *);
int timeout = 500;
if (!(OSCC & OSCC_OOK))
- pr_warning("32kHz clock was not on. Bootloader may need to "
- "be updated\n");
+ pr_warn("32kHz clock was not on. Bootloader may need to be updated\n");
else
return;
#define DMEMC_VIRT IOMEM(0xf6100000)
#define DMEMC_SIZE 0x00100000
+/*
+ * Reserved space for low level debug virtual addresses within
+ * 0xf6200000..0xf6201000
+ */
+
/*
* Internal Memory Controller (PXA27x and later)
*/
#include <mach/mfp-pxa25x.h>
#include <mach/irqs.h>
-extern void __init pxa25x_map_io(void);
-extern void __init pxa25x_init_irq(void);
-#ifdef CONFIG_CPU_PXA26x
-extern void __init pxa26x_init_irq(void);
-#endif
-
-#define pxa25x_handle_irq icip_handle_irq
-
#endif /* __MACH_PXA25x_H */
#define ARB_CORE_PARK (1<<24) /* Be parked with core when idle */
#define ARB_LOCK_FLAG (1<<23) /* Only Locking masters gain access to the bus */
-extern void __init pxa27x_map_io(void);
-extern void __init pxa27x_init_irq(void);
extern int __init pxa27x_set_pwrmode(unsigned int mode);
extern void pxa27x_cpu_pm_enter(suspend_state_t state);
-#define pxa27x_handle_irq ichp_handle_irq
-
#endif /* __MACH_PXA27x_H */
#include <mach/pxa3xx-regs.h>
#include <mach/irqs.h>
-extern void __init pxa3xx_map_io(void);
-extern void __init pxa3xx_init_irq(void);
-
-#define pxa3xx_handle_irq ichp_handle_irq
-
#endif /* __MACH_PXA3XX_H */
break;
default:
/* warning and fall through, treat as MFP_LPM_DEFAULT */
- pr_warning("%s: GPIO%d: unsupported low power mode\n",
- __func__, gpio);
+ pr_warn("%s: GPIO%d: unsupported low power mode\n",
+ __func__, gpio);
break;
}
* configurations of those pins not able to wakeup
*/
if ((c & MFP_LPM_CAN_WAKEUP) && !gpio_desc[gpio].can_wakeup) {
- pr_warning("%s: GPIO%d unable to wakeup\n",
- __func__, gpio);
+ pr_warn("%s: GPIO%d unable to wakeup\n", __func__, gpio);
return -EINVAL;
}
if ((c & MFP_LPM_CAN_WAKEUP) && is_out) {
- pr_warning("%s: output GPIO%d unable to wakeup\n",
- __func__, gpio);
+ pr_warn("%s: output GPIO%d unable to wakeup\n", __func__, gpio);
return -EINVAL;
}
int gpio = mfp_to_gpio(mfp);
if ((mfp > MFP_PIN_GPIO127) || !gpio_desc[gpio].valid) {
- pr_warning("%s: GPIO%d is invalid pin\n", __func__, gpio);
+ pr_warn("%s: GPIO%d is invalid pin\n", __func__, gpio);
return -1;
}
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
if (ret)
- pr_warning("poodle: Unable to register LoCoMo device\n");
+ pr_warn("poodle: Unable to register LoCoMo device\n");
pxa_set_fb_info(&poodle_locomo_device.dev, &poodle_fb_info);
pxa_set_udc_info(&udc_info);
#include <asm/mach/arch.h>
#include <asm/mach/time.h>
#include <mach/irqs.h>
-#include <mach/pxa3xx.h>
#include "generic.h"
#ifdef CONFIG_PXA3xx
-extern void __init pxa3xx_dt_init_irq(void);
-
static const struct of_dev_auxdata pxa3xx_auxdata_lookup[] __initconst = {
OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40100000, "pxa2xx-uart.0", NULL),
OF_DEV_AUXDATA("mrvl,pxa-uart", 0x40200000, "pxa2xx-uart.1", NULL),
.dt_compat = pxa3xx_dt_board_compat,
MACHINE_END
#endif
+
+#ifdef CONFIG_PXA27x
+static const char * const pxa27x_dt_board_compat[] __initconst = {
+ "marvell,pxa270",
+ NULL,
+};
+
+DT_MACHINE_START(PXA27X_DT, "Marvell PXA2xx (Device Tree Support)")
+ .map_io = pxa27x_map_io,
+ .init_irq = pxa27x_dt_init_irq,
+ .handle_irq = pxa27x_handle_irq,
+ .restart = pxa_restart,
+ .dt_compat = pxa27x_dt_board_compat,
+MACHINE_END
+#endif
pxa_init_irq(34, pxa27x_set_wake);
}
+void __init pxa27x_dt_init_irq(void)
+{
+ if (IS_ENABLED(CONFIG_OF))
+ pxa_dt_irq_init(pxa27x_set_wake);
+}
+
static struct map_desc pxa27x_io_desc[] __initdata = {
{ /* Mem Ctl */
.virtual = (unsigned long)SMEMC_VIRT,
cpu_relax();
}
- pr_warning("%s: ULPI access timed out!\n", __func__);
+ pr_warn("%s: ULPI access timed out!\n", __func__);
return -ETIMEDOUT;
}
int err;
if (pxa310_ulpi_get_phymode() != SYNCH) {
- pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
+ pr_warn("%s: PHY is not in SYNCH mode!\n", __func__);
return -EBUSY;
}
static int pxa310_ulpi_write(struct usb_phy *otg, u32 val, u32 reg)
{
if (pxa310_ulpi_get_phymode() != SYNCH) {
- pr_warning("%s: PHY is not in SYNCH mode!\n", __func__);
+ pr_warn("%s: PHY is not in SYNCH mode!\n", __func__);
return -EBUSY;
}
"W1 external pullup enable");
if (ret < 0)
- pr_warning("Unable to request GPIO_W1_PULLUP_ENABLE\n");
+ pr_warn("Unable to request GPIO_W1_PULLUP_ENABLE\n");
else
gpio_direction_output(GPIO_W1_PULLUP_ENABLE, 0);
ret = gpio_request(GPIO_TFT_VA_EN, "display VA enable");
if (ret < 0)
- pr_warning("Unable to request GPIO_TFT_VA_EN\n");
+ pr_warn("Unable to request GPIO_TFT_VA_EN\n");
else
gpio_direction_output(GPIO_TFT_VA_EN, 1);
ret = gpio_request(GPIO_DISPLAY_ENABLE, "display enable");
if (ret < 0)
- pr_warning("Unable to request GPIO_DISPLAY_ENABLE\n");
+ pr_warn("Unable to request GPIO_DISPLAY_ENABLE\n");
else
gpio_direction_output(GPIO_DISPLAY_ENABLE, 1);
/* Set PEN2 high to enable maximum charge current */
ret = gpio_request(GPIO_CHRG_PEN2, "CHRG_PEN2");
if (ret < 0)
- pr_warning("Unable to request GPIO_CHRG_PEN2\n");
+ pr_warn("Unable to request GPIO_CHRG_PEN2\n");
else
gpio_direction_output(GPIO_CHRG_PEN2, 1);
ret = gpio_request(GPIO_CHARGE_DC_OK, "CABLE_DC_OK");
if (ret < 0)
- pr_warning("Unable to request GPIO_CHARGE_DC_OK\n");
+ pr_warn("Unable to request GPIO_CHARGE_DC_OK\n");
ret = gpio_request(GPIO_CHARGE_USB_SUSP, "CHARGE_USB_SUSP");
if (ret < 0)
- pr_warning("Unable to request GPIO_CHARGE_USB_SUSP\n");
+ pr_warn("Unable to request GPIO_CHARGE_USB_SUSP\n");
else
gpio_direction_output(GPIO_CHARGE_USB_SUSP, 0);
ret = gpio_request(GPIO_CODEC_RESET, "cs4270 reset");
if (ret < 0)
- pr_warning("unable to request GPIO_CODEC_RESET\n");
+ pr_warn("unable to request GPIO_CODEC_RESET\n");
else
gpio_direction_output(GPIO_CODEC_RESET, 1);
ret = gpio_request(GPIO_SPDIF_RESET, "ak4104 s/pdif reset");
if (ret < 0)
- pr_warning("unable to request GPIO_SPDIF_RESET\n");
+ pr_warn("unable to request GPIO_SPDIF_RESET\n");
else
gpio_direction_output(GPIO_SPDIF_RESET, 1);
ret = gpio_request(GPIO_MCLK_RESET, "MCLK reset");
if (ret < 0)
- pr_warning("unable to request GPIO_MCLK_RESET\n");
+ pr_warn("unable to request GPIO_MCLK_RESET\n");
else
gpio_direction_output(GPIO_MCLK_RESET, 1);
ret = gpio_request(GPIO_W2W_RESET, "Wi2Wi reset");
if (ret < 0)
- pr_warning("Unable to request GPIO_W2W_RESET\n");
+ pr_warn("Unable to request GPIO_W2W_RESET\n");
else
gpio_direction_output(GPIO_W2W_RESET, 0);
ret = gpio_request(GPIO_W2W_PDN, "Wi2Wi powerup");
if (ret < 0)
- pr_warning("Unable to request GPIO_W2W_PDN\n");
+ pr_warn("Unable to request GPIO_W2W_PDN\n");
else
gpio_direction_output(GPIO_W2W_PDN, 0);
/* this can be used to switch off the device */
ret = gpio_request(GPIO_SHUTDOWN_SUPPLY, "supply shutdown");
if (ret < 0)
- pr_warning("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
+ pr_warn("Unable to request GPIO_SHUTDOWN_SUPPLY\n");
else
gpio_direction_output(GPIO_SHUTDOWN_SUPPLY, 0);
ret = gpio_request(GPIO_SHUTDOWN_BATT, "battery shutdown");
if (ret < 0)
- pr_warning("Unable to request GPIO_SHUTDOWN_BATT\n");
+ pr_warn("Unable to request GPIO_SHUTDOWN_BATT\n");
else
gpio_direction_output(GPIO_SHUTDOWN_BATT, 0);
#include <linux/gpio_keys.h>
#include <linux/input.h>
#include <linux/gpio.h>
-#include <linux/pda_power.h>
+#include <linux/power/gpio-charger.h>
#include <linux/spi/spi.h>
#include <linux/spi/pxa2xx_spi.h>
#include <linux/input/matrix_keypad.h>
/*
* Tosa AC IN
*/
-static int tosa_power_init(struct device *dev)
-{
- int ret = gpio_request(TOSA_GPIO_AC_IN, "ac in");
- if (ret)
- goto err_gpio_req;
-
- ret = gpio_direction_input(TOSA_GPIO_AC_IN);
- if (ret)
- goto err_gpio_in;
-
- return 0;
-
-err_gpio_in:
- gpio_free(TOSA_GPIO_AC_IN);
-err_gpio_req:
- return ret;
-}
-
-static void tosa_power_exit(struct device *dev)
-{
- gpio_free(TOSA_GPIO_AC_IN);
-}
-
-static int tosa_power_ac_online(void)
-{
- return gpio_get_value(TOSA_GPIO_AC_IN) == 0;
-}
-
static char *tosa_ac_supplied_to[] = {
"main-battery",
"backup-battery",
"jacket-battery",
};
-static struct pda_power_pdata tosa_power_data = {
- .init = tosa_power_init,
- .is_ac_online = tosa_power_ac_online,
- .exit = tosa_power_exit,
+static struct gpio_charger_platform_data tosa_power_data = {
+ .name = "charger",
+ .type = POWER_SUPPLY_TYPE_MAINS,
+ .gpio = TOSA_GPIO_AC_IN,
+ .gpio_active_low = 1,
.supplied_to = tosa_ac_supplied_to,
.num_supplicants = ARRAY_SIZE(tosa_ac_supplied_to),
};
};
static struct platform_device tosa_power_device = {
- .name = "pda-power",
+ .name = "gpio-charger",
.id = -1,
.dev.platform_data = &tosa_power_data,
.resource = tosa_power_resource,
menu "RealView platform type"
depends on ARCH_REALVIEW
+config REALVIEW_DT
+ bool "Support RealView(R) Device Tree based boot"
+ select ARM_GIC
+ select MFD_SYSCON
+ select POWER_RESET
+ select POWER_RESET_VERSATILE
+ select POWER_SUPPLY
+ select SOC_REALVIEW
+ select USE_OF
+ help
+ Include support for booting the ARM(R) RealView(R) evaluation
+ boards using a device tree machine description.
+
config MACH_REALVIEW_EB
bool "Support RealView(R) Emulation Baseboard"
select ARM_GIC
#
obj-y := core.o
+obj-$(CONFIG_REALVIEW_DT) += realview-dt.o
obj-$(CONFIG_MACH_REALVIEW_EB) += realview_eb.o
obj-$(CONFIG_MACH_REALVIEW_PB11MP) += realview_pb11mp.o
obj-$(CONFIG_MACH_REALVIEW_PB1176) += realview_pb1176.o
--- /dev/null
+/*
+ * Copyright (C) 2014 Linaro Ltd.
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/of_platform.h>
+#include <asm/mach/arch.h>
+#include <asm/hardware/cache-l2x0.h>
+#include "core.h"
+
+static const char *realview_dt_platform_compat[] __initconst = {
+ "arm,realview-eb",
+ "arm,realview-pb1176",
+ "arm,realview-pb11mp",
+ "arm,realview-pba8",
+ "arm,realview-pbx",
+ NULL,
+};
+
+DT_MACHINE_START(REALVIEW_DT, "ARM RealView Machine (Device Tree Support)")
+#ifdef CONFIG_ZONE_DMA
+ .dma_zone_size = SZ_256M,
+#endif
+ .dt_compat = realview_dt_platform_compat,
+ .l2c_aux_val = 0x0,
+ .l2c_aux_mask = ~0x0,
+MACHINE_END
#include <linux/init.h>
ENTRY(rockchip_secondary_startup)
- bl v7_invalidate_l1
+ mrc p15, 0, r0, c0, c0, 0 @ read main ID register
+ ldr r1, =0x00000c09 @ Cortex-A9 primary part number
+ teq r0, r1
+ beq v7_invalidate_l1
b secondary_startup
ENDPROC(rockchip_secondary_startup)
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/regmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/reset.h>
+#include <linux/cpu.h>
#include <asm/cacheflush.h>
#include <asm/cp15.h>
#include <asm/smp_scu.h>
#define PMU_PWRDN_SCU 4
-static void __iomem *pmu_base_addr;
+static struct regmap *pmu;
-static inline bool pmu_power_domain_is_on(int pd)
+static int pmu_power_domain_is_on(int pd)
{
- return !(readl_relaxed(pmu_base_addr + PMU_PWRDN_ST) & BIT(pd));
+ u32 val;
+ int ret;
+
+ ret = regmap_read(pmu, PMU_PWRDN_ST, &val);
+ if (ret < 0)
+ return ret;
+
+ return !(val & BIT(pd));
}
-static void pmu_set_power_domain(int pd, bool on)
+struct reset_control *rockchip_get_core_reset(int cpu)
{
- u32 val = readl_relaxed(pmu_base_addr + PMU_PWRDN_CON);
- if (on)
- val &= ~BIT(pd);
+ struct device *dev = get_cpu_device(cpu);
+ struct device_node *np;
+
+ /* The cpu device is only available after the initial core bringup */
+ if (dev)
+ np = dev->of_node;
else
- val |= BIT(pd);
- writel(val, pmu_base_addr + PMU_PWRDN_CON);
+ np = of_get_cpu_node(cpu, 0);
- while (pmu_power_domain_is_on(pd) != on) { }
+ return of_reset_control_get(np, NULL);
+}
+
+static int pmu_set_power_domain(int pd, bool on)
+{
+ u32 val = (on) ? 0 : BIT(pd);
+ int ret;
+
+ /*
+ * We need to soft reset the cpu when we turn off the cpu power domain,
+ * or else the active processors might be stalled when the individual
+ * processor is powered down.
+ */
+ if (read_cpuid_part() != ARM_CPU_PART_CORTEX_A9) {
+ struct reset_control *rstc = rockchip_get_core_reset(pd);
+
+ if (IS_ERR(rstc)) {
+ pr_err("%s: could not get reset control for core %d\n",
+ __func__, pd);
+ return PTR_ERR(rstc);
+ }
+
+ if (on)
+ reset_control_deassert(rstc);
+ else
+ reset_control_assert(rstc);
+
+ reset_control_put(rstc);
+ }
+
+ ret = regmap_update_bits(pmu, PMU_PWRDN_CON, BIT(pd), val);
+ if (ret < 0) {
+ pr_err("%s: could not update power domain\n", __func__);
+ return ret;
+ }
+
+ ret = -1;
+ while (ret != on) {
+ ret = pmu_power_domain_is_on(pd);
+ if (ret < 0) {
+ pr_err("%s: could not read power domain state\n",
+ __func__);
+ return ret;
+ }
+ }
+
+ return 0;
}
/*
static int __cpuinit rockchip_boot_secondary(unsigned int cpu,
struct task_struct *idle)
{
- if (!sram_base_addr || !pmu_base_addr) {
+ int ret;
+
+ if (!sram_base_addr || !pmu) {
pr_err("%s: sram or pmu missing for cpu boot\n", __func__);
return -ENXIO;
}
}
/* start the core */
- pmu_set_power_domain(0 + cpu, true);
+ ret = pmu_set_power_domain(0 + cpu, true);
+ if (ret < 0)
+ return ret;
+
+ if (read_cpuid_part() != ARM_CPU_PART_CORTEX_A9) {
+ /* We communicate with the bootrom to active the cpus other
+ * than cpu0, after a blob of initialize code, they will
+ * stay at wfe state, once they are actived, they will check
+ * the mailbox:
+ * sram_base_addr + 4: 0xdeadbeaf
+ * sram_base_addr + 8: start address for pc
+ * */
+ udelay(10);
+ writel(virt_to_phys(rockchip_secondary_startup),
+ sram_base_addr + 8);
+ writel(0xDEADBEAF, sram_base_addr + 4);
+ dsb_sev();
+ }
return 0;
}
return -EINVAL;
}
- sram_base_addr = of_iomap(node, 0);
-
/* set the boot function for the sram code */
rockchip_boot_fn = virt_to_phys(rockchip_secondary_startup);
return 0;
}
-static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
+static struct regmap_config rockchip_pmu_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+};
+
+static int __init rockchip_smp_prepare_pmu(void)
{
struct device_node *node;
- unsigned int i;
+ void __iomem *pmu_base;
- node = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+ /*
+ * This function is only called via smp_ops->smp_prepare_cpu().
+ * That only happens if a "/cpus" device tree node exists
+ * and has an "enable-method" property that selects the SMP
+ * operations defined herein.
+ */
+ node = of_find_node_by_path("/cpus");
+
+ pmu = syscon_regmap_lookup_by_phandle(node, "rockchip,pmu");
+ of_node_put(node);
+ if (!IS_ERR(pmu))
+ return 0;
+
+ pmu = syscon_regmap_lookup_by_compatible("rockchip,rk3066-pmu");
+ if (!IS_ERR(pmu))
+ return 0;
+
+ /* fallback, create our own regmap for the pmu area */
+ pmu = NULL;
+ node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-pmu");
if (!node) {
- pr_err("%s: missing scu\n", __func__);
- return;
+ pr_err("%s: could not find pmu dt node\n", __func__);
+ return -ENODEV;
}
- scu_base_addr = of_iomap(node, 0);
- if (!scu_base_addr) {
- pr_err("%s: could not map scu registers\n", __func__);
- return;
+ pmu_base = of_iomap(node, 0);
+ if (!pmu_base) {
+ pr_err("%s: could not map pmu registers\n", __func__);
+ return -ENOMEM;
}
- node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-smp-sram");
- if (!node) {
- pr_err("%s: could not find sram dt node\n", __func__);
- return;
+ pmu = regmap_init_mmio(NULL, pmu_base, &rockchip_pmu_regmap_config);
+ if (IS_ERR(pmu)) {
+ int ret = PTR_ERR(pmu);
+
+ iounmap(pmu_base);
+ pmu = NULL;
+ pr_err("%s: regmap init failed\n", __func__);
+ return ret;
}
- if (rockchip_smp_prepare_sram(node))
- return;
+ return 0;
+}
- node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-pmu");
+static void __init rockchip_smp_prepare_cpus(unsigned int max_cpus)
+{
+ struct device_node *node;
+ unsigned int i;
+
+ node = of_find_compatible_node(NULL, NULL, "rockchip,rk3066-smp-sram");
if (!node) {
- pr_err("%s: could not find pmu dt node\n", __func__);
+ pr_err("%s: could not find sram dt node\n", __func__);
return;
}
- pmu_base_addr = of_iomap(node, 0);
- if (!pmu_base_addr) {
- pr_err("%s: could not map pmu registers\n", __func__);
+ sram_base_addr = of_iomap(node, 0);
+ if (!sram_base_addr) {
+ pr_err("%s: could not map sram registers\n", __func__);
return;
}
- /* enable the SCU power domain */
- pmu_set_power_domain(PMU_PWRDN_SCU, true);
-
- /*
- * While the number of cpus is gathered from dt, also get the number
- * of cores from the scu to verify this value when booting the cores.
- */
- ncores = scu_get_core_count(scu_base_addr);
+ if (rockchip_smp_prepare_pmu())
+ return;
- scu_enable(scu_base_addr);
+ if (read_cpuid_part() == ARM_CPU_PART_CORTEX_A9) {
+ if (rockchip_smp_prepare_sram(node))
+ return;
+
+ /* enable the SCU power domain */
+ pmu_set_power_domain(PMU_PWRDN_SCU, true);
+
+ node = of_find_compatible_node(NULL, NULL, "arm,cortex-a9-scu");
+ if (!node) {
+ pr_err("%s: missing scu\n", __func__);
+ return;
+ }
+
+ scu_base_addr = of_iomap(node, 0);
+ if (!scu_base_addr) {
+ pr_err("%s: could not map scu registers\n", __func__);
+ return;
+ }
+
+ /*
+ * While the number of cpus is gathered from dt, also get the
+ * number of cores from the scu to verify this value when
+ * booting the cores.
+ */
+ ncores = scu_get_core_count(scu_base_addr);
+ pr_err("%s: ncores %d\n", __func__, ncores);
+
+ scu_enable(scu_base_addr);
+ } else {
+ unsigned int l2ctlr;
+
+ asm ("mrc p15, 1, %0, c9, c0, 2\n" : "=r" (l2ctlr));
+ ncores = ((l2ctlr >> 24) & 0x3) + 1;
+ }
/* Make sure that all cores except the first are really off */
for (i = 1; i < ncores; i++)
#include <asm/hardware/cache-l2x0.h>
#include "core.h"
+static void __init rockchip_dt_init(void)
+{
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ platform_device_register_simple("cpufreq-dt", 0, NULL, 0);
+}
+
static const char * const rockchip_board_dt_compat[] = {
"rockchip,rk2928",
"rockchip,rk3066a",
.l2c_aux_val = 0,
.l2c_aux_mask = ~0,
.dt_compat = rockchip_board_dt_compat,
+ .init_machine = rockchip_dt_init,
MACHINE_END
+++ /dev/null
-/* arch/arm/mach-sa1100/include/mach/debug-macro.S
- *
- * Debugging macro include header
- *
- * Copyright (C) 1994-1999 Russell King
- * Moved from linux/arch/arm/kernel/debug.S by Ben Dooks
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
-*/
-#include <mach/hardware.h>
-
- .macro addruart, rp, rv, tmp
- mrc p15, 0, \rp, c1, c0
- tst \rp, #1 @ MMU enabled?
- moveq \rp, #0x80000000 @ physical base address
- movne \rp, #0xf8000000 @ virtual address
-
- @ We probe for the active serial port here, coherently with
- @ the comment in arch/arm/mach-sa1100/include/mach/uncompress.h.
- @ We assume r1 can be clobbered.
-
- @ see if Ser3 is active
- add \rp, \rp, #0x00050000
- ldr \rv, [\rp, #UTCR3]
- tst \rv, #UTCR3_TXE
-
- @ if Ser3 is inactive, then try Ser1
- addeq \rp, \rp, #(0x00010000 - 0x00050000)
- ldreq \rv, [\rp, #UTCR3]
- tsteq \rv, #UTCR3_TXE
-
- @ if Ser1 is inactive, then try Ser2
- addeq \rp, \rp, #(0x00030000 - 0x00010000)
- ldreq \rv, [\rp, #UTCR3]
- tsteq \rv, #UTCR3_TXE
-
- @ clear top bits, and generate both phys and virt addresses
- lsl \rp, \rp, #8
- lsr \rp, \rp, #8
- orr \rv, \rp, #0xf8000000 @ virtual
- orr \rp, \rp, #0x80000000 @ physical
-
- .endm
-
- .macro senduart,rd,rx
- str \rd, [\rx, #UTDR]
- .endm
-
- .macro waituart,rd,rx
-1001: ldr \rd, [\rx, #UTSR1]
- tst \rd, #UTSR1_TNF
- beq 1001b
- .endm
-
- .macro busyuart,rd,rx
-1001: ldr \rd, [\rx, #UTSR1]
- tst \rd, #UTSR1_TBY
- bne 1001b
- .endm
static DEFINE_SPINLOCK(nano_lock);
static int nanoengine_get_pci_address(struct pci_bus *bus,
- unsigned int devfn, int where, unsigned long *address)
+ unsigned int devfn, int where, void __iomem **address)
{
int ret = PCIBIOS_DEVICE_NOT_FOUND;
unsigned int busnr = bus->number;
- *address = NANO_PCI_CONFIG_SPACE_VIRT +
+ *address = (void __iomem *)NANO_PCI_CONFIG_SPACE_VIRT +
((bus->number << 16) | (devfn << 8) | (where & ~3));
ret = (busnr > 255 || devfn > 255 || where > 255) ?
int size, u32 *val)
{
int ret;
- unsigned long address;
+ void __iomem *address;
unsigned long flags;
u32 v;
int size, u32 val)
{
int ret;
- unsigned long address;
+ void __iomem *address;
unsigned long flags;
unsigned shift;
u32 v;
config ARCH_SHMOBILE
bool
+ select ZONE_DMA if ARM_LPAE
config PM_RCAR
bool
select PM_RCAR if PM || SMP
select RENESAS_IRQC
select SYS_SUPPORTS_SH_CMT
+ select PCI_DOMAINS if PCI
config ARCH_RMOBILE
bool
select NO_IOPORT_MAP
select PINCTRL
select ARCH_REQUIRE_GPIOLIB
- select ARCH_HAS_OPP
if ARCH_SHMOBILE_MULTI
comment "Renesas ARM SoCs Board Type"
-config MACH_KOELSCH
- bool "Koelsch board"
- depends on ARCH_R8A7791
- select MICREL_PHY if SH_ETH
-
config MACH_LAGER
bool "Lager board"
depends on ARCH_R8A7790
select MIGHT_HAVE_PCI
select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
-config ARCH_R8A7791
- bool "R-Car M2-W (R8A77910)"
- select ARCH_RCAR_GEN2
- select ARCH_WANT_OPTIONAL_GPIOLIB
- select ARM_GIC
- select MIGHT_HAVE_PCI
- select ARCH_DMA_ADDR_T_64BIT if ARM_LPAE
-
comment "Renesas ARM SoCs Board Type"
config MACH_APE6EVM
select MICREL_PHY if SH_ETH
select SND_SOC_AK4642 if SND_SIMPLE_CARD
-config MACH_KOELSCH
- bool "Koelsch board"
- depends on ARCH_R8A7791
- select USE_OF
- select MICREL_PHY if SH_ETH
-
config MACH_KZM9G
bool "KZM-A9-GT board"
depends on ARCH_SH73A0
obj-$(CONFIG_ARCH_R7S72100) += setup-r7s72100.o
# Clock objects
-obj-y += clock.o
ifndef CONFIG_COMMON_CLK
+obj-y += clock.o
obj-$(CONFIG_ARCH_SH7372) += clock-sh7372.o
obj-$(CONFIG_ARCH_SH73A0) += clock-sh73a0.o
obj-$(CONFIG_ARCH_R8A73A4) += clock-r8a73a4.o
obj-$(CONFIG_ARCH_R8A7778) += clock-r8a7778.o
obj-$(CONFIG_ARCH_R8A7779) += clock-r8a7779.o
obj-$(CONFIG_ARCH_R8A7790) += clock-r8a7790.o
-obj-$(CONFIG_ARCH_R8A7791) += clock-r8a7791.o
endif
# CPU reset vector handling objects
# Shared SoC family objects
obj-$(CONFIG_ARCH_RCAR_GEN2) += setup-rcar-gen2.o platsmp-apmu.o $(cpu-y)
+CFLAGS_setup-rcar-gen2.o += -march=armv7-a
# SMP objects
smp-y := $(cpu-y)
# Board objects
ifdef CONFIG_ARCH_SHMOBILE_MULTI
-obj-$(CONFIG_MACH_KOELSCH) += board-koelsch-reference.o
obj-$(CONFIG_MACH_LAGER) += board-lager-reference.o
obj-$(CONFIG_MACH_MARZEN) += board-marzen-reference.o
else
obj-$(CONFIG_MACH_MARZEN) += board-marzen.o
obj-$(CONFIG_MACH_LAGER) += board-lager.o
obj-$(CONFIG_MACH_ARMADILLO800EVA) += board-armadillo800eva.o
-obj-$(CONFIG_MACH_KOELSCH) += board-koelsch.o
obj-$(CONFIG_MACH_KZM9G) += board-kzm9g.o
obj-$(CONFIG_MACH_KZM9G_REFERENCE) += board-kzm9g-reference.o
endif
loadaddr-$(CONFIG_MACH_ARMADILLO800EVA) += 0x40008000
loadaddr-$(CONFIG_MACH_BOCKW) += 0x60008000
loadaddr-$(CONFIG_MACH_BOCKW_REFERENCE) += 0x60008000
-loadaddr-$(CONFIG_MACH_KOELSCH) += 0x40008000
loadaddr-$(CONFIG_MACH_KZM9G) += 0x41008000
loadaddr-$(CONFIG_MACH_KZM9G_REFERENCE) += 0x41008000
loadaddr-$(CONFIG_MACH_LAGER) += 0x40008000
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/gpio.h>
clk_put(parent);
clk_put(mp);
- r8a73a4_add_dt_devices();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/gpio.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
*/
#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/err.h>
-#include <linux/kernel.h>
-#include <linux/input.h>
-#include <linux/platform_data/st1232_pdata.h>
-#include <linux/irq.h>
-#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/gpio_keys.h>
-#include <linux/regulator/driver.h>
+#include <linux/i2c-gpio.h>
+#include <linux/input.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/mfd/tmio.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/sh_mmcif.h>
+#include <linux/mmc/sh_mobile_sdhi.h>
#include <linux/pinctrl/machine.h>
+#include <linux/platform_data/st1232_pdata.h>
+#include <linux/platform_device.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
+#include <linux/reboot.h>
+#include <linux/regulator/driver.h>
#include <linux/regulator/fixed.h>
#include <linux/regulator/gpio-regulator.h>
#include <linux/regulator/machine.h>
#include <linux/sh_eth.h>
-#include <linux/videodev2.h>
#include <linux/usb/renesas_usbhs.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mmcif.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/i2c-gpio.h>
-#include <linux/reboot.h>
+#include <linux/videodev2.h>
-#include <media/mt9t112.h>
-#include <media/sh_mobile_ceu.h>
-#include <media/soc_camera.h>
-#include <asm/page.h>
+#include <asm/hardware/cache-l2x0.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <video/sh_mobile_lcdc.h>
-#include <video/sh_mobile_hdmi.h>
+#include <asm/page.h>
+#include <media/mt9t112.h>
+#include <media/sh_mobile_ceu.h>
+#include <media/soc_camera.h>
#include <sound/sh_fsi.h>
#include <sound/simple_card.h>
+#include <video/sh_mobile_hdmi.h>
+#include <video/sh_mobile_lcdc.h>
#include "common.h"
#include "irqs.h"
static struct pm_domain_device domain_devices[] __initdata = {
{ "A4LC", &lcdc0_device },
{ "A4LC", &hdmi_lcdc_device },
+ { "A4MP", &hdmi_device },
+ { "A4MP", &fsi_device },
+ { "A4R", &ceu0_device },
+ { "A4S", &sh_eth_device },
+ { "A3SP", &pwm_device },
+ { "A3SP", &sdhi0_device },
+ { "A3SP", &sh_mmcif_device },
};
- struct platform_device *usb = NULL;
+ struct platform_device *usb = NULL, *sdhi1 = NULL;
regulator_register_always_on(0, "fixed-3.3V", fixed3v3_power_consumers,
ARRAY_SIZE(fixed3v3_power_consumers), 3300000);
platform_device_register(&vcc_sdhi1);
platform_device_register(&sdhi1_device);
+ sdhi1 = &sdhi1_device;
}
ARRAY_SIZE(domain_devices));
if (usb)
rmobile_add_device_to_domain("A3SP", usb);
+ if (sdhi1)
+ rmobile_add_device_to_domain("A3SP", sdhi1);
r8a7740_pm_init();
}
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/of_platform.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/mfd/tmio.h>
+++ /dev/null
-/*
- * Koelsch board support - Reference DT implementation
- *
- * Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/kernel.h>
-#include <linux/of_platform.h>
-#include <linux/platform_data/rcar-du.h>
-
-#include <asm/mach/arch.h>
-
-#include "clock.h"
-#include "common.h"
-#include "irqs.h"
-#include "r8a7791.h"
-#include "rcar-gen2.h"
-
-/* DU */
-static struct rcar_du_encoder_data koelsch_du_encoders[] = {
- {
- .type = RCAR_DU_ENCODER_NONE,
- .output = RCAR_DU_OUTPUT_LVDS0,
- .connector.lvds.panel = {
- .width_mm = 210,
- .height_mm = 158,
- .mode = {
- .pixelclock = 65000000,
- .hactive = 1024,
- .hfront_porch = 20,
- .hback_porch = 160,
- .hsync_len = 136,
- .vactive = 768,
- .vfront_porch = 3,
- .vback_porch = 29,
- .vsync_len = 6,
- },
- },
- },
-};
-
-static struct rcar_du_platform_data koelsch_du_pdata = {
- .encoders = koelsch_du_encoders,
- .num_encoders = ARRAY_SIZE(koelsch_du_encoders),
-};
-
-static const struct resource du_resources[] __initconst = {
- DEFINE_RES_MEM(0xfeb00000, 0x40000),
- DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
- DEFINE_RES_IRQ(gic_spi(256)),
- DEFINE_RES_IRQ(gic_spi(268)),
-};
-
-static void __init koelsch_add_du_device(void)
-{
- struct platform_device_info info = {
- .name = "rcar-du-r8a7791",
- .id = -1,
- .res = du_resources,
- .num_res = ARRAY_SIZE(du_resources),
- .data = &koelsch_du_pdata,
- .size_data = sizeof(koelsch_du_pdata),
- .dma_mask = DMA_BIT_MASK(32),
- };
-
- platform_device_register_full(&info);
-}
-
-/*
- * This is a really crude hack to provide clkdev support to platform
- * devices until they get moved to DT.
- */
-static const struct clk_name clk_names[] __initconst = {
- { "du0", "du.0", "rcar-du-r8a7791" },
- { "du1", "du.1", "rcar-du-r8a7791" },
- { "lvds0", "lvds.0", "rcar-du-r8a7791" },
-};
-
-static void __init koelsch_add_standard_devices(void)
-{
- shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false);
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
- koelsch_add_du_device();
-}
-
-static const char * const koelsch_boards_compat_dt[] __initconst = {
- "renesas,koelsch",
- "renesas,koelsch-reference",
- NULL,
-};
-
-DT_MACHINE_START(KOELSCH_DT, "koelsch")
- .smp = smp_ops(r8a7791_smp_ops),
- .init_early = shmobile_init_delay,
- .init_time = rcar_gen2_timer_init,
- .init_machine = koelsch_add_standard_devices,
- .init_late = shmobile_init_late,
- .reserve = rcar_gen2_reserve,
- .dt_compat = koelsch_boards_compat_dt,
-MACHINE_END
+++ /dev/null
-/*
- * Koelsch board support
- *
- * Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2013-2014 Renesas Solutions Corp.
- * Copyright (C) 2013 Magnus Damm
- * Copyright (C) 2014 Cogent Embedded, Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-
-#include <linux/dma-mapping.h>
-#include <linux/gpio.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/leds.h>
-#include <linux/mfd/tmio.h>
-#include <linux/mmc/host.h>
-#include <linux/mmc/sh_mobile_sdhi.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/phy.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/platform_data/gpio-rcar.h>
-#include <linux/platform_data/rcar-du.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/driver.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/gpio-regulator.h>
-#include <linux/regulator/machine.h>
-#include <linux/sh_eth.h>
-#include <linux/spi/flash.h>
-#include <linux/spi/rspi.h>
-#include <linux/spi/spi.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-
-#include "common.h"
-#include "irqs.h"
-#include "r8a7791.h"
-#include "rcar-gen2.h"
-
-/* DU */
-static struct rcar_du_encoder_data koelsch_du_encoders[] = {
- {
- .type = RCAR_DU_ENCODER_NONE,
- .output = RCAR_DU_OUTPUT_LVDS0,
- .connector.lvds.panel = {
- .width_mm = 210,
- .height_mm = 158,
- .mode = {
- .pixelclock = 65000000,
- .hactive = 1024,
- .hfront_porch = 20,
- .hback_porch = 160,
- .hsync_len = 136,
- .vactive = 768,
- .vfront_porch = 3,
- .vback_porch = 29,
- .vsync_len = 6,
- },
- },
- },
-};
-
-static const struct rcar_du_platform_data koelsch_du_pdata __initconst = {
- .encoders = koelsch_du_encoders,
- .num_encoders = ARRAY_SIZE(koelsch_du_encoders),
-};
-
-static const struct resource du_resources[] __initconst = {
- DEFINE_RES_MEM(0xfeb00000, 0x40000),
- DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
- DEFINE_RES_IRQ(gic_spi(256)),
- DEFINE_RES_IRQ(gic_spi(268)),
-};
-
-static void __init koelsch_add_du_device(void)
-{
- struct platform_device_info info = {
- .name = "rcar-du-r8a7791",
- .id = -1,
- .res = du_resources,
- .num_res = ARRAY_SIZE(du_resources),
- .data = &koelsch_du_pdata,
- .size_data = sizeof(koelsch_du_pdata),
- .dma_mask = DMA_BIT_MASK(32),
- };
-
- platform_device_register_full(&info);
-}
-
-/* Ether */
-static const struct sh_eth_plat_data ether_pdata __initconst = {
- .phy = 0x1,
- .phy_irq = irq_pin(0),
- .edmac_endian = EDMAC_LITTLE_ENDIAN,
- .phy_interface = PHY_INTERFACE_MODE_RMII,
- .ether_link_active_low = 1,
-};
-
-static const struct resource ether_resources[] __initconst = {
- DEFINE_RES_MEM(0xee700000, 0x400),
- DEFINE_RES_IRQ(gic_spi(162)),
-};
-
-static const struct platform_device_info ether_info __initconst = {
- .name = "r8a7791-ether",
- .id = -1,
- .res = ether_resources,
- .num_res = ARRAY_SIZE(ether_resources),
- .data = ðer_pdata,
- .size_data = sizeof(ether_pdata),
- .dma_mask = DMA_BIT_MASK(32),
-};
-
-/* LEDS */
-static struct gpio_led koelsch_leds[] = {
- {
- .name = "led8",
- .gpio = RCAR_GP_PIN(2, 21),
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- }, {
- .name = "led7",
- .gpio = RCAR_GP_PIN(2, 20),
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- }, {
- .name = "led6",
- .gpio = RCAR_GP_PIN(2, 19),
- .default_state = LEDS_GPIO_DEFSTATE_ON,
- },
-};
-
-static const struct gpio_led_platform_data koelsch_leds_pdata __initconst = {
- .leds = koelsch_leds,
- .num_leds = ARRAY_SIZE(koelsch_leds),
-};
-
-/* GPIO KEY */
-#define GPIO_KEY(c, g, d, ...) \
- { .code = c, .gpio = g, .desc = d, .active_low = 1, \
- .wakeup = 1, .debounce_interval = 20 }
-
-static struct gpio_keys_button gpio_buttons[] = {
- GPIO_KEY(KEY_4, RCAR_GP_PIN(5, 3), "SW2-pin4"),
- GPIO_KEY(KEY_3, RCAR_GP_PIN(5, 2), "SW2-pin3"),
- GPIO_KEY(KEY_2, RCAR_GP_PIN(5, 1), "SW2-pin2"),
- GPIO_KEY(KEY_1, RCAR_GP_PIN(5, 0), "SW2-pin1"),
- GPIO_KEY(KEY_G, RCAR_GP_PIN(7, 6), "SW36"),
- GPIO_KEY(KEY_F, RCAR_GP_PIN(7, 5), "SW35"),
- GPIO_KEY(KEY_E, RCAR_GP_PIN(7, 4), "SW34"),
- GPIO_KEY(KEY_D, RCAR_GP_PIN(7, 3), "SW33"),
- GPIO_KEY(KEY_C, RCAR_GP_PIN(7, 2), "SW32"),
- GPIO_KEY(KEY_B, RCAR_GP_PIN(7, 1), "SW31"),
- GPIO_KEY(KEY_A, RCAR_GP_PIN(7, 0), "SW30"),
-};
-
-static const struct gpio_keys_platform_data koelsch_keys_pdata __initconst = {
- .buttons = gpio_buttons,
- .nbuttons = ARRAY_SIZE(gpio_buttons),
-};
-
-/* QSPI */
-static const struct resource qspi_resources[] __initconst = {
- DEFINE_RES_MEM(0xe6b10000, 0x1000),
- DEFINE_RES_IRQ_NAMED(gic_spi(184), "mux"),
-};
-
-static const struct rspi_plat_data qspi_pdata __initconst = {
- .num_chipselect = 1,
-};
-
-/* SPI Flash memory (Spansion S25FL512SAGMFIG11 64 MiB) */
-static struct mtd_partition spi_flash_part[] = {
- {
- .name = "loader",
- .offset = 0x00000000,
- .size = 512 * 1024,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "bootenv",
- .offset = MTDPART_OFS_APPEND,
- .size = 512 * 1024,
- .mask_flags = MTD_WRITEABLE,
- },
- {
- .name = "data",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- },
-};
-
-static const struct flash_platform_data spi_flash_data = {
- .name = "m25p80",
- .parts = spi_flash_part,
- .nr_parts = ARRAY_SIZE(spi_flash_part),
- .type = "s25fl512s",
-};
-
-static const struct spi_board_info spi_info[] __initconst = {
- {
- .modalias = "m25p80",
- .platform_data = &spi_flash_data,
- .mode = SPI_MODE_0 | SPI_TX_QUAD | SPI_RX_QUAD,
- .max_speed_hz = 30000000,
- .bus_num = 0,
- .chip_select = 0,
- },
-};
-
-/* SATA0 */
-static const struct resource sata0_resources[] __initconst = {
- DEFINE_RES_MEM(0xee300000, 0x2000),
- DEFINE_RES_IRQ(gic_spi(105)),
-};
-
-static const struct platform_device_info sata0_info __initconst = {
- .name = "sata-r8a7791",
- .id = 0,
- .res = sata0_resources,
- .num_res = ARRAY_SIZE(sata0_resources),
- .dma_mask = DMA_BIT_MASK(32),
-};
-
-/* I2C */
-static const struct resource i2c_resources[] __initconst = {
- /* I2C0 */
- DEFINE_RES_MEM(0xE6508000, 0x40),
- DEFINE_RES_IRQ(gic_spi(287)),
- /* I2C1 */
- DEFINE_RES_MEM(0xE6518000, 0x40),
- DEFINE_RES_IRQ(gic_spi(288)),
- /* I2C2 */
- DEFINE_RES_MEM(0xE6530000, 0x40),
- DEFINE_RES_IRQ(gic_spi(286)),
- /* I2C3 */
- DEFINE_RES_MEM(0xE6540000, 0x40),
- DEFINE_RES_IRQ(gic_spi(290)),
- /* I2C4 */
- DEFINE_RES_MEM(0xE6520000, 0x40),
- DEFINE_RES_IRQ(gic_spi(19)),
- /* I2C5 */
- DEFINE_RES_MEM(0xE6528000, 0x40),
- DEFINE_RES_IRQ(gic_spi(20)),
-};
-
-static void __init koelsch_add_i2c(unsigned idx)
-{
- unsigned res_idx = idx * 2;
-
- BUG_ON(res_idx >= ARRAY_SIZE(i2c_resources));
-
- platform_device_register_simple("i2c-rcar_gen2", idx,
- i2c_resources + res_idx, 2);
-}
-
-#define SDHI_REGULATOR(idx, vdd_pin, vccq_pin) \
-static struct regulator_consumer_supply vcc_sdhi##idx##_consumer = \
- REGULATOR_SUPPLY("vmmc", "sh_mobile_sdhi." #idx); \
- \
-static struct regulator_init_data vcc_sdhi##idx##_init_data = { \
- .constraints = { \
- .valid_ops_mask = REGULATOR_CHANGE_STATUS, \
- }, \
- .consumer_supplies = &vcc_sdhi##idx##_consumer, \
- .num_consumer_supplies = 1, \
-}; \
- \
-static const struct fixed_voltage_config vcc_sdhi##idx##_info __initconst = {\
- .supply_name = "SDHI" #idx "Vcc", \
- .microvolts = 3300000, \
- .gpio = vdd_pin, \
- .enable_high = 1, \
- .init_data = &vcc_sdhi##idx##_init_data, \
-}; \
- \
-static struct regulator_consumer_supply vccq_sdhi##idx##_consumer = \
- REGULATOR_SUPPLY("vqmmc", "sh_mobile_sdhi." #idx); \
- \
-static struct regulator_init_data vccq_sdhi##idx##_init_data = { \
- .constraints = { \
- .input_uV = 3300000, \
- .min_uV = 1800000, \
- .max_uV = 3300000, \
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | \
- REGULATOR_CHANGE_STATUS, \
- }, \
- .consumer_supplies = &vccq_sdhi##idx##_consumer, \
- .num_consumer_supplies = 1, \
-}; \
- \
-static struct gpio vccq_sdhi##idx##_gpio = \
- { vccq_pin, GPIOF_OUT_INIT_HIGH, "vccq-sdhi" #idx }; \
- \
-static struct gpio_regulator_state vccq_sdhi##idx##_states[] = { \
- { .value = 1800000, .gpios = 0 }, \
- { .value = 3300000, .gpios = 1 }, \
-}; \
- \
-static const struct gpio_regulator_config vccq_sdhi##idx##_info __initconst = {\
- .supply_name = "vqmmc", \
- .gpios = &vccq_sdhi##idx##_gpio, \
- .nr_gpios = 1, \
- .states = vccq_sdhi##idx##_states, \
- .nr_states = ARRAY_SIZE(vccq_sdhi##idx##_states), \
- .type = REGULATOR_VOLTAGE, \
- .init_data = &vccq_sdhi##idx##_init_data, \
-};
-
-SDHI_REGULATOR(0, RCAR_GP_PIN(7, 17), RCAR_GP_PIN(2, 12));
-SDHI_REGULATOR(1, RCAR_GP_PIN(7, 18), RCAR_GP_PIN(2, 13));
-SDHI_REGULATOR(2, RCAR_GP_PIN(7, 19), RCAR_GP_PIN(2, 26));
-
-/* SDHI0 */
-static struct sh_mobile_sdhi_info sdhi0_info __initdata = {
- .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
- MMC_CAP_POWER_OFF_CARD,
- .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT,
-};
-
-static struct resource sdhi0_resources[] __initdata = {
- DEFINE_RES_MEM(0xee100000, 0x200),
- DEFINE_RES_IRQ(gic_spi(165)),
-};
-
-/* SDHI1 */
-static struct sh_mobile_sdhi_info sdhi1_info __initdata = {
- .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
- MMC_CAP_POWER_OFF_CARD,
- .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT,
-};
-
-static struct resource sdhi1_resources[] __initdata = {
- DEFINE_RES_MEM(0xee140000, 0x100),
- DEFINE_RES_IRQ(gic_spi(167)),
-};
-
-/* SDHI2 */
-static struct sh_mobile_sdhi_info sdhi2_info __initdata = {
- .tmio_caps = MMC_CAP_SD_HIGHSPEED | MMC_CAP_SDIO_IRQ |
- MMC_CAP_POWER_OFF_CARD,
- .tmio_flags = TMIO_MMC_HAS_IDLE_WAIT |
- TMIO_MMC_WRPROTECT_DISABLE,
-};
-
-static struct resource sdhi2_resources[] __initdata = {
- DEFINE_RES_MEM(0xee160000, 0x100),
- DEFINE_RES_IRQ(gic_spi(168)),
-};
-
-static const struct pinctrl_map koelsch_pinctrl_map[] = {
- /* DU */
- PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
- "du_rgb666", "du"),
- PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
- "du_sync", "du"),
- PIN_MAP_MUX_GROUP_DEFAULT("rcar-du-r8a7791", "pfc-r8a7791",
- "du_clk_out_0", "du"),
- /* Ether */
- PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
- "eth_link", "eth"),
- PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
- "eth_mdio", "eth"),
- PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
- "eth_rmii", "eth"),
- PIN_MAP_MUX_GROUP_DEFAULT("r8a7791-ether", "pfc-r8a7791",
- "intc_irq0", "intc"),
- /* QSPI */
- PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7791",
- "qspi_ctrl", "qspi"),
- PIN_MAP_MUX_GROUP_DEFAULT("qspi.0", "pfc-r8a7791",
- "qspi_data4", "qspi"),
- /* SCIF0 (CN19: DEBUG SERIAL0) */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.6", "pfc-r8a7791",
- "scif0_data_d", "scif0"),
- /* SCIF1 (CN20: DEBUG SERIAL1) */
- PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.7", "pfc-r8a7791",
- "scif1_data_d", "scif1"),
- /* I2C1 */
- PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.1", "pfc-r8a7791",
- "i2c1_e", "i2c1"),
- /* I2C2 */
- PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.2", "pfc-r8a7791",
- "i2c2", "i2c2"),
- /* I2C4 */
- PIN_MAP_MUX_GROUP_DEFAULT("i2c-rcar_gen2.4", "pfc-r8a7791",
- "i2c4_c", "i2c4"),
- /* SDHI0 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",
- "sdhi0_data4", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",
- "sdhi0_ctrl", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",
- "sdhi0_cd", "sdhi0"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7791",
- "sdhi0_wp", "sdhi0"),
- /* SDHI2 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",
- "sdhi1_data4", "sdhi1"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",
- "sdhi1_ctrl", "sdhi1"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",
- "sdhi1_cd", "sdhi1"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.1", "pfc-r8a7791",
- "sdhi1_wp", "sdhi1"),
- /* SDHI2 */
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7791",
- "sdhi2_data4", "sdhi2"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7791",
- "sdhi2_ctrl", "sdhi2"),
- PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.2", "pfc-r8a7791",
- "sdhi2_cd", "sdhi2"),
-};
-
-static void __init koelsch_add_standard_devices(void)
-{
- r8a7791_clock_init();
- pinctrl_register_mappings(koelsch_pinctrl_map,
- ARRAY_SIZE(koelsch_pinctrl_map));
- r8a7791_pinmux_init();
- r8a7791_add_standard_devices();
- platform_device_register_full(ðer_info);
- platform_device_register_data(NULL, "leds-gpio", -1,
- &koelsch_leds_pdata,
- sizeof(koelsch_leds_pdata));
- platform_device_register_data(NULL, "gpio-keys", -1,
- &koelsch_keys_pdata,
- sizeof(koelsch_keys_pdata));
- platform_device_register_resndata(NULL, "qspi", 0,
- qspi_resources,
- ARRAY_SIZE(qspi_resources),
- &qspi_pdata, sizeof(qspi_pdata));
- spi_register_board_info(spi_info, ARRAY_SIZE(spi_info));
-
- koelsch_add_du_device();
-
- platform_device_register_full(&sata0_info);
-
- koelsch_add_i2c(1);
- koelsch_add_i2c(2);
- koelsch_add_i2c(4);
- koelsch_add_i2c(5);
-
- platform_device_register_data(NULL, "reg-fixed-voltage", 0,
- &vcc_sdhi0_info, sizeof(struct fixed_voltage_config));
- platform_device_register_data(NULL, "reg-fixed-voltage", 1,
- &vcc_sdhi1_info, sizeof(struct fixed_voltage_config));
- platform_device_register_data(NULL, "reg-fixed-voltage", 2,
- &vcc_sdhi2_info, sizeof(struct fixed_voltage_config));
- platform_device_register_data(NULL, "gpio-regulator", 0,
- &vccq_sdhi0_info, sizeof(struct gpio_regulator_config));
- platform_device_register_data(NULL, "gpio-regulator", 1,
- &vccq_sdhi1_info, sizeof(struct gpio_regulator_config));
- platform_device_register_data(NULL, "gpio-regulator", 2,
- &vccq_sdhi2_info, sizeof(struct gpio_regulator_config));
-
- platform_device_register_resndata(NULL, "sh_mobile_sdhi", 0,
- sdhi0_resources, ARRAY_SIZE(sdhi0_resources),
- &sdhi0_info, sizeof(struct sh_mobile_sdhi_info));
-
- platform_device_register_resndata(NULL, "sh_mobile_sdhi", 1,
- sdhi1_resources, ARRAY_SIZE(sdhi1_resources),
- &sdhi1_info, sizeof(struct sh_mobile_sdhi_info));
-
- platform_device_register_resndata(NULL, "sh_mobile_sdhi", 2,
- sdhi2_resources, ARRAY_SIZE(sdhi2_resources),
- &sdhi2_info, sizeof(struct sh_mobile_sdhi_info));
-
-}
-
-/*
- * Ether LEDs on the Koelsch board are named LINK and ACTIVE which corresponds
- * to non-default 01 setting of the Micrel KSZ8041 PHY control register 1 bits
- * 14-15. We have to set them back to 01 from the default 00 value each time
- * the PHY is reset. It's also important because the PHY's LED0 signal is
- * connected to SoC's ETH_LINK signal and in the PHY's default mode it will
- * bounce on and off after each packet, which we apparently want to avoid.
- */
-static int koelsch_ksz8041_fixup(struct phy_device *phydev)
-{
- u16 phyctrl1 = phy_read(phydev, 0x1e);
-
- phyctrl1 &= ~0xc000;
- phyctrl1 |= 0x4000;
- return phy_write(phydev, 0x1e, phyctrl1);
-}
-
-static void __init koelsch_init(void)
-{
- koelsch_add_standard_devices();
-
- irq_set_irq_type(irq_pin(0), IRQ_TYPE_LEVEL_LOW);
-
- if (IS_ENABLED(CONFIG_PHYLIB))
- phy_register_fixup_for_id("r8a7791-ether-ff:01",
- koelsch_ksz8041_fixup);
-}
-
-static const char * const koelsch_boards_compat_dt[] __initconst = {
- "renesas,koelsch",
- NULL,
-};
-
-DT_MACHINE_START(KOELSCH_DT, "koelsch")
- .smp = smp_ops(r8a7791_smp_ops),
- .init_early = shmobile_init_delay,
- .init_time = rcar_gen2_timer_init,
- .init_machine = koelsch_init,
- .init_late = shmobile_init_late,
- .reserve = rcar_gen2_reserve,
- .dt_compat = koelsch_boards_compat_dt,
-MACHINE_END
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/delay.h>
#endif
}
+#define RESCNT2 IOMEM(0xe6188020)
+static void kzm9g_restart(enum reboot_mode mode, const char *cmd)
+{
+ /* Do soft power on reset */
+ writel((1 << 31), RESCNT2);
+}
+
static const char *kzm9g_boards_compat_dt[] __initdata = {
"renesas,kzm9g-reference",
NULL,
.init_early = shmobile_init_delay,
.init_machine = kzm_init,
.init_late = shmobile_init_late,
+ .restart = kzm9g_restart,
.dt_compat = kzm9g_boards_compat_dt,
MACHINE_END
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/delay.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <linux/dma-mapping.h>
#include <linux/init.h>
#include <linux/of_platform.h>
-#include <linux/platform_data/rcar-du.h>
#include <asm/mach/arch.h>
-#include "clock.h"
#include "common.h"
-#include "irqs.h"
#include "r8a7790.h"
#include "rcar-gen2.h"
-/* DU */
-static struct rcar_du_encoder_data lager_du_encoders[] = {
- {
- .type = RCAR_DU_ENCODER_VGA,
- .output = RCAR_DU_OUTPUT_DPAD0,
- }, {
- .type = RCAR_DU_ENCODER_NONE,
- .output = RCAR_DU_OUTPUT_LVDS1,
- .connector.lvds.panel = {
- .width_mm = 210,
- .height_mm = 158,
- .mode = {
- .pixelclock = 65000000,
- .hactive = 1024,
- .hfront_porch = 20,
- .hback_porch = 160,
- .hsync_len = 136,
- .vactive = 768,
- .vfront_porch = 3,
- .vback_porch = 29,
- .vsync_len = 6,
- },
- },
- },
-};
-
-static struct rcar_du_platform_data lager_du_pdata = {
- .encoders = lager_du_encoders,
- .num_encoders = ARRAY_SIZE(lager_du_encoders),
-};
-
-static const struct resource du_resources[] __initconst = {
- DEFINE_RES_MEM(0xfeb00000, 0x70000),
- DEFINE_RES_MEM_NAMED(0xfeb90000, 0x1c, "lvds.0"),
- DEFINE_RES_MEM_NAMED(0xfeb94000, 0x1c, "lvds.1"),
- DEFINE_RES_IRQ(gic_spi(256)),
- DEFINE_RES_IRQ(gic_spi(268)),
- DEFINE_RES_IRQ(gic_spi(269)),
-};
-
-static void __init lager_add_du_device(void)
-{
- struct platform_device_info info = {
- .name = "rcar-du-r8a7790",
- .id = -1,
- .res = du_resources,
- .num_res = ARRAY_SIZE(du_resources),
- .data = &lager_du_pdata,
- .size_data = sizeof(lager_du_pdata),
- .dma_mask = DMA_BIT_MASK(32),
- };
-
- platform_device_register_full(&info);
-}
-
-/*
- * This is a really crude hack to provide clkdev support to platform
- * devices until they get moved to DT.
- */
-static const struct clk_name clk_names[] __initconst = {
- { "du0", "du.0", "rcar-du-r8a7790" },
- { "du1", "du.1", "rcar-du-r8a7790" },
- { "du2", "du.2", "rcar-du-r8a7790" },
- { "lvds0", "lvds.0", "rcar-du-r8a7790" },
- { "lvds1", "lvds.1", "rcar-du-r8a7790" },
-};
-
-static void __init lager_add_standard_devices(void)
-{
- shmobile_clk_workaround(clk_names, ARRAY_SIZE(clk_names), false);
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-
- lager_add_du_device();
-}
-
static const char *lager_boards_compat_dt[] __initdata = {
"renesas,lager",
"renesas,lager-reference",
.smp = smp_ops(r8a7790_smp_ops),
.init_early = shmobile_init_delay,
.init_time = rcar_gen2_timer_init,
- .init_machine = lager_add_standard_devices,
.init_late = shmobile_init_late,
.reserve = rcar_gen2_reserve,
.dt_compat = lager_boards_compat_dt,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/gpio.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/delay.h>
#include <linux/kernel.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/clk/shmobile.h>
#include <asm/irq.h>
#include <asm/mach/arch.h>
-#include "clock.h"
#include "common.h"
#include "irqs.h"
#include "r8a7779.h"
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/init.h>
#include <linux/io.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/kernel.h>
MSTP128, MSTP127, MSTP125,
MSTP116, MSTP111, MSTP100, MSTP117,
- MSTP230,
+ MSTP230, MSTP229,
MSTP222,
MSTP218, MSTP217, MSTP216, MSTP214,
MSTP207, MSTP206, MSTP204, MSTP203, MSTP202, MSTP201, MSTP200,
[MSTP127] = SH_CLK_MSTP32(&div4_clks[DIV4_S], SMSTPCR1, 27, 0), /* CEU20 */
[MSTP125] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR1, 25, 0), /* TMU0 */
[MSTP117] = SH_CLK_MSTP32(&div4_clks[DIV4_B], SMSTPCR1, 17, 0), /* LCDC1 */
- [MSTP116] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR1, 16, 0), /* IIC0 */
+ [MSTP116] = SH_CLK_MSTP32(&div4_clks[DIV4_HPP], SMSTPCR1, 16, 0), /* IIC0 */
[MSTP111] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR1, 11, 0), /* TMU1 */
[MSTP100] = SH_CLK_MSTP32(&div4_clks[DIV4_B], SMSTPCR1, 0, 0), /* LCDC0 */
[MSTP230] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 30, 0), /* SCIFA6 */
+ [MSTP229] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR2, 29, 0), /* INTCA */
[MSTP222] = SH_CLK_MSTP32(&div6_clks[DIV6_SUB], SMSTPCR2, 22, 0), /* SCIFA7 */
[MSTP218] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR2, 18, 0), /* DMAC1 */
[MSTP217] = SH_CLK_MSTP32(&div4_clks[DIV4_HP], SMSTPCR2, 17, 0), /* DMAC2 */
CLKDEV_DEV_ID("sh-dma-engine.0", &mstp_clks[MSTP218]),
CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP222]),
CLKDEV_DEV_ID("e6cd0000.serial", &mstp_clks[MSTP222]),
+ CLKDEV_DEV_ID("renesas_intc_irqpin.0", &mstp_clks[MSTP229]),
+ CLKDEV_DEV_ID("renesas_intc_irqpin.1", &mstp_clks[MSTP229]),
+ CLKDEV_DEV_ID("renesas_intc_irqpin.2", &mstp_clks[MSTP229]),
+ CLKDEV_DEV_ID("renesas_intc_irqpin.3", &mstp_clks[MSTP229]),
CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP230]),
CLKDEV_DEV_ID("e6cc0000.serial", &mstp_clks[MSTP230]),
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/*
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/bitops.h>
#include <linux/init.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/init.h>
#include <linux/io.h>
#define SDCKCR 0xE6150074
#define SD2CKCR 0xE6150078
-#define SD3CKCR 0xE615007C
+#define SD3CKCR 0xE615026C
#define MMC0CKCR 0xE6150240
#define MMC1CKCR 0xE6150244
#define SSPCKCR 0xE6150248
+++ /dev/null
-/*
- * r8a7791 clock framework support
- *
- * Copyright (C) 2013 Renesas Electronics Corporation
- * Copyright (C) 2013 Renesas Solutions Corp.
- * Copyright (C) 2013 Magnus Damm
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- */
-#include <linux/init.h>
-#include <linux/io.h>
-#include <linux/kernel.h>
-#include <linux/sh_clk.h>
-#include <linux/clkdev.h>
-#include "clock.h"
-#include "common.h"
-#include "rcar-gen2.h"
-
-/*
- * MD EXTAL PLL0 PLL1 PLL3
- * 14 13 19 (MHz) *1 *1
- *---------------------------------------------------
- * 0 0 0 15 x 1 x172/2 x208/2 x106
- * 0 0 1 15 x 1 x172/2 x208/2 x88
- * 0 1 0 20 x 1 x130/2 x156/2 x80
- * 0 1 1 20 x 1 x130/2 x156/2 x66
- * 1 0 0 26 / 2 x200/2 x240/2 x122
- * 1 0 1 26 / 2 x200/2 x240/2 x102
- * 1 1 0 30 / 2 x172/2 x208/2 x106
- * 1 1 1 30 / 2 x172/2 x208/2 x88
- *
- * *1 : Table 7.6 indicates VCO ouput (PLLx = VCO/2)
- * see "p1 / 2" on R8A7791_CLOCK_ROOT() below
- */
-
-#define CPG_BASE 0xe6150000
-#define CPG_LEN 0x1000
-
-#define SMSTPCR0 0xE6150130
-#define SMSTPCR1 0xE6150134
-#define SMSTPCR2 0xe6150138
-#define SMSTPCR3 0xE615013C
-#define SMSTPCR5 0xE6150144
-#define SMSTPCR7 0xe615014c
-#define SMSTPCR8 0xE6150990
-#define SMSTPCR9 0xE6150994
-#define SMSTPCR10 0xE6150998
-#define SMSTPCR11 0xE615099C
-
-#define MSTPSR1 IOMEM(0xe6150038)
-#define MSTPSR2 IOMEM(0xe6150040)
-#define MSTPSR3 IOMEM(0xe6150048)
-#define MSTPSR5 IOMEM(0xe615003c)
-#define MSTPSR7 IOMEM(0xe61501c4)
-#define MSTPSR8 IOMEM(0xe61509a0)
-#define MSTPSR9 IOMEM(0xe61509a4)
-#define MSTPSR11 IOMEM(0xe61509ac)
-
-#define SDCKCR 0xE6150074
-#define SD1CKCR 0xE6150078
-#define SD2CKCR 0xE615026c
-#define MMC0CKCR 0xE6150240
-#define MMC1CKCR 0xE6150244
-#define SSPCKCR 0xE6150248
-#define SSPRSCKCR 0xE615024C
-
-static struct clk_mapping cpg_mapping = {
- .phys = CPG_BASE,
- .len = CPG_LEN,
-};
-
-static struct clk extal_clk = {
- /* .rate will be updated on r8a7791_clock_init() */
- .mapping = &cpg_mapping,
-};
-
-static struct sh_clk_ops followparent_clk_ops = {
- .recalc = followparent_recalc,
-};
-
-static struct clk main_clk = {
- /* .parent will be set r8a73a4_clock_init */
- .ops = &followparent_clk_ops,
-};
-
-/*
- * clock ratio of these clock will be updated
- * on r8a7791_clock_init()
- */
-SH_FIXED_RATIO_CLK_SET(pll1_clk, main_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(pll3_clk, main_clk, 1, 1);
-SH_FIXED_RATIO_CLK_SET(qspi_clk, pll1_clk, 1, 1);
-
-/* fixed ratio clock */
-SH_FIXED_RATIO_CLK_SET(extal_div2_clk, extal_clk, 1, 2);
-SH_FIXED_RATIO_CLK_SET(cp_clk, extal_clk, 1, 2);
-
-SH_FIXED_RATIO_CLK_SET(pll1_div2_clk, pll1_clk, 1, 2);
-SH_FIXED_RATIO_CLK_SET(hp_clk, pll1_clk, 1, 12);
-SH_FIXED_RATIO_CLK_SET(p_clk, pll1_clk, 1, 24);
-SH_FIXED_RATIO_CLK_SET(rclk_clk, pll1_clk, 1, (48 * 1024));
-SH_FIXED_RATIO_CLK_SET(mp_clk, pll1_div2_clk, 1, 15);
-SH_FIXED_RATIO_CLK_SET(zg_clk, pll1_clk, 1, 3);
-SH_FIXED_RATIO_CLK_SET(zx_clk, pll1_clk, 1, 3);
-SH_FIXED_RATIO_CLK_SET(zs_clk, pll1_clk, 1, 6);
-
-static struct clk *main_clks[] = {
- &extal_clk,
- &extal_div2_clk,
- &main_clk,
- &pll1_clk,
- &pll1_div2_clk,
- &pll3_clk,
- &hp_clk,
- &p_clk,
- &qspi_clk,
- &rclk_clk,
- &mp_clk,
- &cp_clk,
- &zg_clk,
- &zx_clk,
- &zs_clk,
-};
-
-/* SDHI (DIV4) clock */
-static int divisors[] = { 2, 3, 4, 6, 8, 12, 16, 18, 24, 0, 36, 48, 10 };
-
-static struct clk_div_mult_table div4_div_mult_table = {
- .divisors = divisors,
- .nr_divisors = ARRAY_SIZE(divisors),
-};
-
-static struct clk_div4_table div4_table = {
- .div_mult_table = &div4_div_mult_table,
-};
-
-enum {
- DIV4_SDH, DIV4_SD0,
- DIV4_NR
-};
-
-static struct clk div4_clks[DIV4_NR] = {
- [DIV4_SDH] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 8, 0x0dff, CLK_ENABLE_ON_INIT),
- [DIV4_SD0] = SH_CLK_DIV4(&pll1_clk, SDCKCR, 4, 0x1df0, CLK_ENABLE_ON_INIT),
-};
-
-/* DIV6 clocks */
-enum {
- DIV6_SD1, DIV6_SD2,
- DIV6_NR
-};
-
-static struct clk div6_clks[DIV6_NR] = {
- [DIV6_SD1] = SH_CLK_DIV6(&pll1_div2_clk, SD1CKCR, 0),
- [DIV6_SD2] = SH_CLK_DIV6(&pll1_div2_clk, SD2CKCR, 0),
-};
-
-/* MSTP */
-enum {
- MSTP1108, MSTP1107, MSTP1106,
- MSTP931, MSTP930, MSTP929, MSTP928, MSTP927, MSTP925,
- MSTP917,
- MSTP815, MSTP814,
- MSTP813,
- MSTP811, MSTP810, MSTP809,
- MSTP726, MSTP724, MSTP723, MSTP721, MSTP720,
- MSTP719, MSTP718, MSTP715, MSTP714,
- MSTP522,
- MSTP314, MSTP312, MSTP311,
- MSTP216, MSTP207, MSTP206,
- MSTP204, MSTP203, MSTP202,
- MSTP124,
- MSTP_NR
-};
-
-static struct clk mstp_clks[MSTP_NR] = {
- [MSTP1108] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 8, MSTPSR11, 0), /* SCIFA5 */
- [MSTP1107] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 7, MSTPSR11, 0), /* SCIFA4 */
- [MSTP1106] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR11, 6, MSTPSR11, 0), /* SCIFA3 */
- [MSTP931] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 31, MSTPSR9, 0), /* I2C0 */
- [MSTP930] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 30, MSTPSR9, 0), /* I2C1 */
- [MSTP929] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 29, MSTPSR9, 0), /* I2C2 */
- [MSTP928] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 28, MSTPSR9, 0), /* I2C3 */
- [MSTP927] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 27, MSTPSR9, 0), /* I2C4 */
- [MSTP925] = SH_CLK_MSTP32_STS(&hp_clk, SMSTPCR9, 25, MSTPSR9, 0), /* I2C5 */
- [MSTP917] = SH_CLK_MSTP32_STS(&qspi_clk, SMSTPCR9, 17, MSTPSR9, 0), /* QSPI */
- [MSTP815] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 15, MSTPSR8, 0), /* SATA0 */
- [MSTP814] = SH_CLK_MSTP32_STS(&zs_clk, SMSTPCR8, 14, MSTPSR8, 0), /* SATA1 */
- [MSTP813] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR8, 13, MSTPSR8, 0), /* Ether */
- [MSTP811] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 11, MSTPSR8, 0), /* VIN0 */
- [MSTP810] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 10, MSTPSR8, 0), /* VIN1 */
- [MSTP809] = SH_CLK_MSTP32_STS(&zg_clk, SMSTPCR8, 9, MSTPSR8, 0), /* VIN2 */
- [MSTP726] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 26, MSTPSR7, 0), /* LVDS0 */
- [MSTP724] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 24, MSTPSR7, 0), /* DU0 */
- [MSTP723] = SH_CLK_MSTP32_STS(&zx_clk, SMSTPCR7, 23, MSTPSR7, 0), /* DU1 */
- [MSTP721] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 21, MSTPSR7, 0), /* SCIF0 */
- [MSTP720] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 20, MSTPSR7, 0), /* SCIF1 */
- [MSTP719] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 19, MSTPSR7, 0), /* SCIF2 */
- [MSTP718] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 18, MSTPSR7, 0), /* SCIF3 */
- [MSTP715] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 15, MSTPSR7, 0), /* SCIF4 */
- [MSTP714] = SH_CLK_MSTP32_STS(&p_clk, SMSTPCR7, 14, MSTPSR7, 0), /* SCIF5 */
- [MSTP522] = SH_CLK_MSTP32_STS(&extal_clk, SMSTPCR5, 22, MSTPSR5, 0), /* Thermal */
- [MSTP314] = SH_CLK_MSTP32_STS(&div4_clks[DIV4_SD0], SMSTPCR3, 14, MSTPSR3, 0), /* SDHI0 */
- [MSTP312] = SH_CLK_MSTP32_STS(&div6_clks[DIV6_SD1], SMSTPCR3, 12, MSTPSR3, 0), /* SDHI1 */
- [MSTP311] = SH_CLK_MSTP32_STS(&div6_clks[DIV6_SD2], SMSTPCR3, 11, MSTPSR3, 0), /* SDHI2 */
- [MSTP216] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 16, MSTPSR2, 0), /* SCIFB2 */
- [MSTP207] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 7, MSTPSR2, 0), /* SCIFB1 */
- [MSTP206] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 6, MSTPSR2, 0), /* SCIFB0 */
- [MSTP204] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 4, MSTPSR2, 0), /* SCIFA0 */
- [MSTP203] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 3, MSTPSR2, 0), /* SCIFA1 */
- [MSTP202] = SH_CLK_MSTP32_STS(&mp_clk, SMSTPCR2, 2, MSTPSR2, 0), /* SCIFA2 */
- [MSTP124] = SH_CLK_MSTP32_STS(&rclk_clk, SMSTPCR1, 24, MSTPSR1, 0), /* CMT0 */
-};
-
-static struct clk_lookup lookups[] = {
-
- /* main clocks */
- CLKDEV_CON_ID("extal", &extal_clk),
- CLKDEV_CON_ID("extal_div2", &extal_div2_clk),
- CLKDEV_CON_ID("main", &main_clk),
- CLKDEV_CON_ID("pll1", &pll1_clk),
- CLKDEV_CON_ID("pll1_div2", &pll1_div2_clk),
- CLKDEV_CON_ID("pll3", &pll3_clk),
- CLKDEV_CON_ID("zg", &zg_clk),
- CLKDEV_CON_ID("zs", &zs_clk),
- CLKDEV_CON_ID("hp", &hp_clk),
- CLKDEV_CON_ID("p", &p_clk),
- CLKDEV_CON_ID("qspi", &qspi_clk),
- CLKDEV_CON_ID("rclk", &rclk_clk),
- CLKDEV_CON_ID("mp", &mp_clk),
- CLKDEV_CON_ID("cp", &cp_clk),
- CLKDEV_CON_ID("peripheral_clk", &hp_clk),
-
- /* MSTP */
- CLKDEV_ICK_ID("lvds.0", "rcar-du-r8a7791", &mstp_clks[MSTP726]),
- CLKDEV_ICK_ID("du.0", "rcar-du-r8a7791", &mstp_clks[MSTP724]),
- CLKDEV_ICK_ID("du.1", "rcar-du-r8a7791", &mstp_clks[MSTP723]),
- CLKDEV_DEV_ID("sh-sci.0", &mstp_clks[MSTP204]), /* SCIFA0 */
- CLKDEV_DEV_ID("sh-sci.1", &mstp_clks[MSTP203]), /* SCIFA1 */
- CLKDEV_DEV_ID("sh-sci.2", &mstp_clks[MSTP206]), /* SCIFB0 */
- CLKDEV_DEV_ID("sh-sci.3", &mstp_clks[MSTP207]), /* SCIFB1 */
- CLKDEV_DEV_ID("sh-sci.4", &mstp_clks[MSTP216]), /* SCIFB2 */
- CLKDEV_DEV_ID("sh-sci.5", &mstp_clks[MSTP202]), /* SCIFA2 */
- CLKDEV_DEV_ID("sh-sci.6", &mstp_clks[MSTP721]), /* SCIF0 */
- CLKDEV_DEV_ID("sh-sci.7", &mstp_clks[MSTP720]), /* SCIF1 */
- CLKDEV_DEV_ID("sh-sci.8", &mstp_clks[MSTP719]), /* SCIF2 */
- CLKDEV_DEV_ID("sh-sci.9", &mstp_clks[MSTP718]), /* SCIF3 */
- CLKDEV_DEV_ID("sh-sci.10", &mstp_clks[MSTP715]), /* SCIF4 */
- CLKDEV_DEV_ID("sh-sci.11", &mstp_clks[MSTP714]), /* SCIF5 */
- CLKDEV_DEV_ID("sh-sci.12", &mstp_clks[MSTP1106]), /* SCIFA3 */
- CLKDEV_DEV_ID("sh-sci.13", &mstp_clks[MSTP1107]), /* SCIFA4 */
- CLKDEV_DEV_ID("sh-sci.14", &mstp_clks[MSTP1108]), /* SCIFA5 */
- CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]),
- CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP312]),
- CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]),
- CLKDEV_ICK_ID("fck", "sh-cmt-48-gen2.0", &mstp_clks[MSTP124]),
- CLKDEV_DEV_ID("qspi.0", &mstp_clks[MSTP917]),
- CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]),
- CLKDEV_DEV_ID("i2c-rcar_gen2.0", &mstp_clks[MSTP931]),
- CLKDEV_DEV_ID("i2c-rcar_gen2.1", &mstp_clks[MSTP930]),
- CLKDEV_DEV_ID("i2c-rcar_gen2.2", &mstp_clks[MSTP929]),
- CLKDEV_DEV_ID("i2c-rcar_gen2.3", &mstp_clks[MSTP928]),
- CLKDEV_DEV_ID("i2c-rcar_gen2.4", &mstp_clks[MSTP927]),
- CLKDEV_DEV_ID("i2c-rcar_gen2.5", &mstp_clks[MSTP925]),
- CLKDEV_DEV_ID("r8a7791-ether", &mstp_clks[MSTP813]), /* Ether */
- CLKDEV_DEV_ID("r8a7791-vin.0", &mstp_clks[MSTP811]),
- CLKDEV_DEV_ID("r8a7791-vin.1", &mstp_clks[MSTP810]),
- CLKDEV_DEV_ID("r8a7791-vin.2", &mstp_clks[MSTP809]),
- CLKDEV_DEV_ID("sata-r8a7791.0", &mstp_clks[MSTP815]),
- CLKDEV_DEV_ID("sata-r8a7791.1", &mstp_clks[MSTP814]),
-};
-
-#define R8A7791_CLOCK_ROOT(e, m, p0, p1, p30, p31) \
- extal_clk.rate = e * 1000 * 1000; \
- main_clk.parent = m; \
- SH_CLK_SET_RATIO(&pll1_clk_ratio, p1 / 2, 1); \
- if (mode & MD(19)) \
- SH_CLK_SET_RATIO(&pll3_clk_ratio, p31, 1); \
- else \
- SH_CLK_SET_RATIO(&pll3_clk_ratio, p30, 1)
-
-
-void __init r8a7791_clock_init(void)
-{
- u32 mode = rcar_gen2_read_mode_pins();
- int k, ret = 0;
-
- switch (mode & (MD(14) | MD(13))) {
- case 0:
- R8A7791_CLOCK_ROOT(15, &extal_clk, 172, 208, 106, 88);
- break;
- case MD(13):
- R8A7791_CLOCK_ROOT(20, &extal_clk, 130, 156, 80, 66);
- break;
- case MD(14):
- R8A7791_CLOCK_ROOT(26, &extal_div2_clk, 200, 240, 122, 102);
- break;
- case MD(13) | MD(14):
- R8A7791_CLOCK_ROOT(30, &extal_div2_clk, 172, 208, 106, 88);
- break;
- }
-
- if ((mode & (MD(3) | MD(2) | MD(1))) == MD(2))
- SH_CLK_SET_RATIO(&qspi_clk_ratio, 1, 16);
- else
- SH_CLK_SET_RATIO(&qspi_clk_ratio, 1, 20);
-
- for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++)
- ret = clk_register(main_clks[k]);
-
- if (!ret)
- ret = sh_clk_div4_register(div4_clks, DIV4_NR, &div4_table);
-
- if (!ret)
- ret = sh_clk_div6_register(div6_clks, DIV6_NR);
-
- if (!ret)
- ret = sh_clk_mstp_register(mstp_clks, MSTP_NR);
-
- clkdev_add_table(lookups, ARRAY_SIZE(lookups));
-
- if (!ret)
- shmobile_clk_init();
- else
- goto epanic;
-
- return;
-
-epanic:
- panic("failed to setup r8a7791 clocks\n");
-}
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/kernel.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <linux/kernel.h>
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
*/
+
+#include <linux/export.h>
#include <linux/kernel.h>
#include <linux/init.h>
-
-#ifdef CONFIG_COMMON_CLK
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include "clock.h"
-
-void __init shmobile_clk_workaround(const struct clk_name *clks,
- int nr_clks, bool enable)
-{
- const struct clk_name *clkn;
- struct clk *clk;
- unsigned int i;
-
- for (i = 0; i < nr_clks; ++i) {
- clkn = clks + i;
- clk = clk_get(NULL, clkn->clk);
- if (!IS_ERR(clk)) {
- clk_register_clkdev(clk, clkn->con_id, clkn->dev_id);
- if (enable)
- clk_prepare_enable(clk);
- clk_put(clk);
- }
- }
-}
-
-#else /* CONFIG_COMMON_CLK */
#include <linux/sh_clk.h>
-#include <linux/export.h>
+
#include "clock.h"
#include "common.h"
{
}
EXPORT_SYMBOL(__clk_put);
-
-#endif /* CONFIG_COMMON_CLK */
#ifndef CLOCK_H
#define CLOCK_H
-#ifdef CONFIG_COMMON_CLK
-/* temporary clock configuration helper for platform devices */
-
-struct clk_name {
- const char *clk;
- const char *con_id;
- const char *dev_id;
-};
-
-void shmobile_clk_workaround(const struct clk_name *clks, int nr_clks,
- bool enable);
-
-#else /* CONFIG_COMMON_CLK */
/* legacy clock implementation */
struct clk;
(p)->div = d; \
} while (0)
-#endif /* CONFIG_COMMON_CLK */
#endif
extern void shmobile_smp_scu_prepare_cpus(unsigned int max_cpus);
extern void shmobile_smp_scu_cpu_die(unsigned int cpu);
extern int shmobile_smp_scu_cpu_kill(unsigned int cpu);
-extern void shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus);
-extern int shmobile_smp_apmu_boot_secondary(unsigned int cpu,
- struct task_struct *idle);
-extern void shmobile_smp_apmu_cpu_die(unsigned int cpu);
-extern int shmobile_smp_apmu_cpu_kill(unsigned int cpu);
struct clk;
extern int shmobile_clk_init(void);
extern void shmobile_handle_irq_intc(struct pt_regs *);
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
*/
#include <linux/linkage.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
/*
* SMP support for SoCs with APMU
*
+ * Copyright (C) 2014 Renesas Electronics Corporation
* Copyright (C) 2013 Magnus Damm
*
* This program is free software; you can redistribute it and/or modify
#include <asm/smp_plat.h>
#include <asm/suspend.h>
#include "common.h"
+#include "platsmp-apmu.h"
static struct {
void __iomem *iomem;
pr_debug("apmu ioremap %d %d %pr\n", cpu, bit, res);
}
-static struct {
- struct resource iomem;
- int cpus[4];
-} apmu_config[] = {
- {
- .iomem = DEFINE_RES_MEM(0xe6152000, 0x88),
- .cpus = { 0, 1, 2, 3 },
- },
- {
- .iomem = DEFINE_RES_MEM(0xe6151000, 0x88),
- .cpus = { 0x100, 0x101, 0x102, 0x103 },
- }
-};
-
-static void apmu_parse_cfg(void (*fn)(struct resource *res, int cpu, int bit))
+static void apmu_parse_cfg(void (*fn)(struct resource *res, int cpu, int bit),
+ struct rcar_apmu_config *apmu_config, int num)
{
u32 id;
int k;
int bit, index;
bool is_allowed;
- for (k = 0; k < ARRAY_SIZE(apmu_config); k++) {
+ for (k = 0; k < num; k++) {
/* only enable the cluster that includes the boot CPU */
is_allowed = false;
for (bit = 0; bit < ARRAY_SIZE(apmu_config[k].cpus); bit++) {
}
}
-void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus)
+void __init shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus,
+ struct rcar_apmu_config *apmu_config,
+ int num)
{
/* install boot code shared by all CPUs */
shmobile_boot_fn = virt_to_phys(shmobile_smp_boot);
shmobile_boot_arg = MPIDR_HWID_BITMASK;
/* perform per-cpu setup */
- apmu_parse_cfg(apmu_init_cpu);
+ apmu_parse_cfg(apmu_init_cpu, apmu_config, num);
}
#ifdef CONFIG_SMP
--- /dev/null
+/*
+ * rmobile apmu definition
+ *
+ * Copyright (C) 2014 Renesas Electronics Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef PLATSMP_APMU_H
+#define PLATSMP_APMU_H
+
+struct rcar_apmu_config {
+ struct resource iomem;
+ int cpus[4];
+};
+
+extern void shmobile_smp_apmu_prepare_cpus(unsigned int max_cpus,
+ struct rcar_apmu_config *apmu_config,
+ int num);
+extern int shmobile_smp_apmu_boot_secondary(unsigned int cpu,
+ struct task_struct *idle);
+extern void shmobile_smp_apmu_cpu_die(unsigned int cpu);
+extern int shmobile_smp_apmu_cpu_kill(unsigned int cpu);
+
+#endif /* PLATSMP_APMU_H */
#include "pm-rmobile.h"
#if defined(CONFIG_PM) && !defined(CONFIG_ARCH_MULTIPLATFORM)
-static int r8a7740_pd_a4s_suspend(void)
+static int r8a7740_pd_a3sm_suspend(void)
{
/*
- * The A4S domain contains the CPU core and therefore it should
+ * The A3SM domain contains the CPU core and therefore it should
* only be turned off if the CPU is not in use.
*/
return -EBUSY;
return console_suspend_enabled ? 0 : -EBUSY;
}
+static int r8a7740_pd_d4_suspend(void)
+{
+ /*
+ * The D4 domain contains the Coresight-ETM hardware block and
+ * therefore it should only be turned off if the debug module is
+ * not in use.
+ */
+ return -EBUSY;
+}
+
static struct rmobile_pm_domain r8a7740_pm_domains[] = {
{
.genpd.name = "A4LC",
.bit_shift = 1,
+ }, {
+ .genpd.name = "A4MP",
+ .bit_shift = 2,
+ }, {
+ .genpd.name = "D4",
+ .bit_shift = 3,
+ .gov = &pm_domain_always_on_gov,
+ .suspend = r8a7740_pd_d4_suspend,
+ }, {
+ .genpd.name = "A4R",
+ .bit_shift = 5,
+ }, {
+ .genpd.name = "A3RV",
+ .bit_shift = 6,
}, {
.genpd.name = "A4S",
.bit_shift = 10,
- .gov = &pm_domain_always_on_gov,
.no_debug = true,
- .suspend = r8a7740_pd_a4s_suspend,
}, {
.genpd.name = "A3SP",
.bit_shift = 11,
.gov = &pm_domain_always_on_gov,
.no_debug = true,
.suspend = r8a7740_pd_a3sp_suspend,
+ }, {
+ .genpd.name = "A3SM",
+ .bit_shift = 12,
+ .gov = &pm_domain_always_on_gov,
+ .suspend = r8a7740_pd_a3sm_suspend,
+ }, {
+ .genpd.name = "A3SG",
+ .bit_shift = 13,
+ }, {
+ .genpd.name = "A4SU",
+ .bit_shift = 20,
},
};
void __init r8a7740_init_pm_domains(void)
{
rmobile_init_domains(r8a7740_pm_domains, ARRAY_SIZE(r8a7740_pm_domains));
+ pm_genpd_add_subdomain_names("A4R", "A3RV");
pm_genpd_add_subdomain_names("A4S", "A3SP");
+ pm_genpd_add_subdomain_names("A4S", "A3SM");
+ pm_genpd_add_subdomain_names("A4S", "A3SG");
}
#endif /* CONFIG_PM && !CONFIG_ARCH_MULTIPLATFORM */
};
void r8a73a4_add_standard_devices(void);
-void r8a73a4_add_dt_devices(void);
void r8a73a4_clock_init(void);
void r8a73a4_pinmux_init(void);
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef __ASM_R8A7740_H__
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifndef __ASM_R8A7778_H__
#define __ASM_R8A7778_H__
extern void r8a7778_add_dt_devices(void);
extern void r8a7778_init_late(void);
-extern void r8a7778_init_delay(void);
extern void r8a7778_init_irq_dt(void);
extern void r8a7778_clock_init(void);
extern void r8a7778_init_irq_extpin(int irlm);
#ifndef __ASM_R8A7791_H__
#define __ASM_R8A7791_H__
-void r8a7791_add_standard_devices(void);
-void r8a7791_clock_init(void);
-void r8a7791_pinmux_init(void);
void r8a7791_pm_init(void);
extern struct smp_operations r8a7791_smp_ops;
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/irq.h>
#include <linux/kernel.h>
DEFINE_RES_IRQ(gic_spi(120)),
};
-#define r8a7790_register_cmt(idx) \
+#define r8a73a4_register_cmt(idx) \
platform_device_register_resndata(NULL, "sh-cmt-48-gen2", \
idx, cmt##idx##_resources, \
ARRAY_SIZE(cmt##idx##_resources), \
&cmt##idx##_platform_data, \
sizeof(struct sh_timer_config))
-void __init r8a73a4_add_dt_devices(void)
-{
- r8a7790_register_cmt(1);
-}
-
/* DMA */
static const struct sh_dmae_slave_config dma_slaves[] = {
{
void __init r8a73a4_add_standard_devices(void)
{
- r8a73a4_add_dt_devices();
+ r8a73a4_register_cmt(1);
r8a73a4_register_scif(0);
r8a73a4_register_scif(1);
r8a73a4_register_scif(2);
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/delay.h>
#include <linux/dma-mapping.h>
void __init r8a7740_map_io(void)
{
+ debug_ll_io_init();
iotable_init(r8a7740_io_desc, ARRAY_SIZE(r8a7740_io_desc));
}
void __init r8a7740_add_standard_devices(void)
{
static struct pm_domain_device domain_devices[] __initdata = {
+ { "A4R", &tmu0_device },
+ { "A4R", &i2c0_device },
+ { "A4S", &irqpin0_device },
+ { "A4S", &irqpin1_device },
+ { "A4S", &irqpin2_device },
+ { "A4S", &irqpin3_device },
{ "A3SP", &scif0_device },
{ "A3SP", &scif1_device },
{ "A3SP", &scif2_device },
{ "A3SP", &scif7_device },
{ "A3SP", &scif8_device },
{ "A3SP", &i2c1_device },
+ { "A3SP", &ipmmu_device },
+ { "A3SP", &dma0_device },
+ { "A3SP", &dma1_device },
+ { "A3SP", &dma2_device },
+ { "A3SP", &usb_dma_device },
};
/* I2C work-around */
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
l2x0_init(base, 0x00400000, 0xc20f0fff);
}
#endif
-
- r8a7778_register_tmu(0);
}
/* HPB-DMA */
void __init r8a7778_add_standard_devices(void)
{
r8a7778_add_dt_devices();
+ r8a7778_register_tmu(0);
r8a7778_register_scif(0);
r8a7778_register_scif(1);
r8a7778_register_scif(2);
&irqpin_platform_data, sizeof(irqpin_platform_data));
}
-void __init r8a7778_init_delay(void)
-{
- shmobile_init_delay();
-}
-
#ifdef CONFIG_USE_OF
#define INT2SMSKCR0 0x82288 /* 0xfe782288 */
#define INT2SMSKCR1 0x8228c /* 0xfe78228c */
};
DT_MACHINE_START(R8A7778_DT, "Generic R8A7778 (Flattened Device Tree)")
- .init_early = r8a7778_init_delay,
+ .init_early = shmobile_init_delay,
.init_irq = r8a7778_init_irq_dt,
.init_late = shmobile_init_late,
.dt_compat = r8a7778_compat_dt,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include "r8a7779.h"
static struct map_desc r8a7779_io_desc[] __initdata = {
- /* 2M entity map for 0xf0000000 (MPCORE) */
+ /* 2M identity mapping for 0xf0000000 (MPCORE) */
{
.virtual = 0xf0000000,
.pfn = __phys_to_pfn(0xf0000000),
.length = SZ_2M,
.type = MT_DEVICE_NONSHARED
},
- /* 16M entity map for 0xfexxxxxx (DMAC-S/HPBREG/INTC2/LRAM/DBSC) */
+ /* 16M identity mapping for 0xfexxxxxx (DMAC-S/HPBREG/INTC2/LRAM/DBSC) */
{
.virtual = 0xfe000000,
.pfn = __phys_to_pfn(0xfe000000),
void __init r8a7779_map_io(void)
{
+ debug_ll_io_init();
iotable_init(r8a7779_io_desc, ARRAY_SIZE(r8a7779_io_desc));
}
/* Early serial console setup is not included here due to
* memory map collisions. The SCIF serial ports in r8a7779
- * are difficult to entity map 1:1 due to collision with the
+ * are difficult to identity map 1:1 due to collision with the
* virtual memory range used by the coherent DMA code on ARM.
*
* Anyone wanting to debug early can remove UPF_IOREMAP from
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/irq.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
-#include <linux/irq.h>
-#include <linux/kernel.h>
-#include <linux/of_platform.h>
-#include <linux/platform_data/gpio-rcar.h>
-#include <linux/platform_data/irq-renesas-irqc.h>
-#include <linux/serial_sci.h>
-#include <linux/sh_timer.h>
+#include <linux/init.h>
#include <asm/mach/arch.h>
#include "common.h"
-#include "irqs.h"
#include "r8a7791.h"
#include "rcar-gen2.h"
-static const struct resource pfc_resources[] __initconst = {
- DEFINE_RES_MEM(0xe6060000, 0x250),
-};
-
-#define r8a7791_register_pfc() \
- platform_device_register_simple("pfc-r8a7791", -1, pfc_resources, \
- ARRAY_SIZE(pfc_resources))
-
-#define R8A7791_GPIO(idx, base, nr) \
-static const struct resource r8a7791_gpio##idx##_resources[] __initconst = { \
- DEFINE_RES_MEM((base), 0x50), \
- DEFINE_RES_IRQ(gic_spi(4 + (idx))), \
-}; \
- \
-static const struct gpio_rcar_config \
-r8a7791_gpio##idx##_platform_data __initconst = { \
- .gpio_base = 32 * (idx), \
- .irq_base = 0, \
- .number_of_pins = (nr), \
- .pctl_name = "pfc-r8a7791", \
- .has_both_edge_trigger = 1, \
-}; \
-
-R8A7791_GPIO(0, 0xe6050000, 32);
-R8A7791_GPIO(1, 0xe6051000, 32);
-R8A7791_GPIO(2, 0xe6052000, 32);
-R8A7791_GPIO(3, 0xe6053000, 32);
-R8A7791_GPIO(4, 0xe6054000, 32);
-R8A7791_GPIO(5, 0xe6055000, 32);
-R8A7791_GPIO(6, 0xe6055400, 32);
-R8A7791_GPIO(7, 0xe6055800, 26);
-
-#define r8a7791_register_gpio(idx) \
- platform_device_register_resndata(NULL, "gpio_rcar", idx, \
- r8a7791_gpio##idx##_resources, \
- ARRAY_SIZE(r8a7791_gpio##idx##_resources), \
- &r8a7791_gpio##idx##_platform_data, \
- sizeof(r8a7791_gpio##idx##_platform_data))
-
-void __init r8a7791_pinmux_init(void)
-{
- r8a7791_register_pfc();
- r8a7791_register_gpio(0);
- r8a7791_register_gpio(1);
- r8a7791_register_gpio(2);
- r8a7791_register_gpio(3);
- r8a7791_register_gpio(4);
- r8a7791_register_gpio(5);
- r8a7791_register_gpio(6);
- r8a7791_register_gpio(7);
-}
-
-#define __R8A7791_SCIF(scif_type, index, baseaddr, irq) \
-static struct plat_sci_port scif##index##_platform_data = { \
- .type = scif_type, \
- .flags = UPF_BOOT_AUTOCONF | UPF_IOREMAP, \
- .scscr = SCSCR_RE | SCSCR_TE, \
-}; \
- \
-static struct resource scif##index##_resources[] = { \
- DEFINE_RES_MEM(baseaddr, 0x100), \
- DEFINE_RES_IRQ(irq), \
-}
-
-#define R8A7791_SCIF(index, baseaddr, irq) \
- __R8A7791_SCIF(PORT_SCIF, index, baseaddr, irq)
-
-#define R8A7791_SCIFA(index, baseaddr, irq) \
- __R8A7791_SCIF(PORT_SCIFA, index, baseaddr, irq)
-
-#define R8A7791_SCIFB(index, baseaddr, irq) \
- __R8A7791_SCIF(PORT_SCIFB, index, baseaddr, irq)
-
-R8A7791_SCIFA(0, 0xe6c40000, gic_spi(144)); /* SCIFA0 */
-R8A7791_SCIFA(1, 0xe6c50000, gic_spi(145)); /* SCIFA1 */
-R8A7791_SCIFB(2, 0xe6c20000, gic_spi(148)); /* SCIFB0 */
-R8A7791_SCIFB(3, 0xe6c30000, gic_spi(149)); /* SCIFB1 */
-R8A7791_SCIFB(4, 0xe6ce0000, gic_spi(150)); /* SCIFB2 */
-R8A7791_SCIFA(5, 0xe6c60000, gic_spi(151)); /* SCIFA2 */
-R8A7791_SCIF(6, 0xe6e60000, gic_spi(152)); /* SCIF0 */
-R8A7791_SCIF(7, 0xe6e68000, gic_spi(153)); /* SCIF1 */
-R8A7791_SCIF(8, 0xe6e58000, gic_spi(22)); /* SCIF2 */
-R8A7791_SCIF(9, 0xe6ea8000, gic_spi(23)); /* SCIF3 */
-R8A7791_SCIF(10, 0xe6ee0000, gic_spi(24)); /* SCIF4 */
-R8A7791_SCIF(11, 0xe6ee8000, gic_spi(25)); /* SCIF5 */
-R8A7791_SCIFA(12, 0xe6c70000, gic_spi(29)); /* SCIFA3 */
-R8A7791_SCIFA(13, 0xe6c78000, gic_spi(30)); /* SCIFA4 */
-R8A7791_SCIFA(14, 0xe6c80000, gic_spi(31)); /* SCIFA5 */
-
-#define r8a7791_register_scif(index) \
- platform_device_register_resndata(NULL, "sh-sci", index, \
- scif##index##_resources, \
- ARRAY_SIZE(scif##index##_resources), \
- &scif##index##_platform_data, \
- sizeof(scif##index##_platform_data))
-
-static struct sh_timer_config cmt0_platform_data = {
- .channels_mask = 0x60,
-};
-
-static struct resource cmt0_resources[] = {
- DEFINE_RES_MEM(0xffca0000, 0x1004),
- DEFINE_RES_IRQ(gic_spi(142)),
-};
-
-#define r8a7791_register_cmt(idx) \
- platform_device_register_resndata(NULL, "sh-cmt-48-gen2", \
- idx, cmt##idx##_resources, \
- ARRAY_SIZE(cmt##idx##_resources), \
- &cmt##idx##_platform_data, \
- sizeof(struct sh_timer_config))
-
-static struct renesas_irqc_config irqc0_data = {
- .irq_base = irq_pin(0), /* IRQ0 -> IRQ9 */
-};
-
-static struct resource irqc0_resources[] = {
- DEFINE_RES_MEM(0xe61c0000, 0x200), /* IRQC Event Detector Block_0 */
- DEFINE_RES_IRQ(gic_spi(0)), /* IRQ0 */
- DEFINE_RES_IRQ(gic_spi(1)), /* IRQ1 */
- DEFINE_RES_IRQ(gic_spi(2)), /* IRQ2 */
- DEFINE_RES_IRQ(gic_spi(3)), /* IRQ3 */
- DEFINE_RES_IRQ(gic_spi(12)), /* IRQ4 */
- DEFINE_RES_IRQ(gic_spi(13)), /* IRQ5 */
- DEFINE_RES_IRQ(gic_spi(14)), /* IRQ6 */
- DEFINE_RES_IRQ(gic_spi(15)), /* IRQ7 */
- DEFINE_RES_IRQ(gic_spi(16)), /* IRQ8 */
- DEFINE_RES_IRQ(gic_spi(17)), /* IRQ9 */
-};
-
-#define r8a7791_register_irqc(idx) \
- platform_device_register_resndata(NULL, "renesas_irqc", \
- idx, irqc##idx##_resources, \
- ARRAY_SIZE(irqc##idx##_resources), \
- &irqc##idx##_data, \
- sizeof(struct renesas_irqc_config))
-
-static const struct resource thermal_resources[] __initconst = {
- DEFINE_RES_MEM(0xe61f0000, 0x14),
- DEFINE_RES_MEM(0xe61f0100, 0x38),
- DEFINE_RES_IRQ(gic_spi(69)),
-};
-
-#define r8a7791_register_thermal() \
- platform_device_register_simple("rcar_thermal", -1, \
- thermal_resources, \
- ARRAY_SIZE(thermal_resources))
-
-void __init r8a7791_add_standard_devices(void)
-{
- r8a7791_register_scif(0);
- r8a7791_register_scif(1);
- r8a7791_register_scif(2);
- r8a7791_register_scif(3);
- r8a7791_register_scif(4);
- r8a7791_register_scif(5);
- r8a7791_register_scif(6);
- r8a7791_register_scif(7);
- r8a7791_register_scif(8);
- r8a7791_register_scif(9);
- r8a7791_register_scif(10);
- r8a7791_register_scif(11);
- r8a7791_register_scif(12);
- r8a7791_register_scif(13);
- r8a7791_register_scif(14);
- r8a7791_register_cmt(0);
- r8a7791_register_irqc(0);
- r8a7791_register_thermal();
-}
-
-#ifdef CONFIG_USE_OF
static const char *r8a7791_boards_compat_dt[] __initdata = {
"renesas,r8a7791",
NULL,
.reserve = rcar_gen2_reserve,
.dt_compat = r8a7791_boards_compat_dt,
MACHINE_END
-#endif /* CONFIG_USE_OF */
*
* Copyright (C) 2013 Renesas Solutions Corp.
* Copyright (C) 2013 Magnus Damm
+ * Copyright (C) 2014 Ulrich Hecht
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/clk/shmobile.h>
#include <linux/dma-contiguous.h>
#include <linux/io.h>
#include <linux/kernel.h>
+#include <linux/of.h>
#include <linux/of_fdt.h>
#include <asm/mach/arch.h>
#include "common.h"
{
#if defined(CONFIG_ARM_ARCH_TIMER) || defined(CONFIG_COMMON_CLK)
u32 mode = rcar_gen2_read_mode_pins();
+ bool is_e2 = (bool)of_find_compatible_node(NULL, NULL,
+ "renesas,r8a7794");
#endif
#ifdef CONFIG_ARM_ARCH_TIMER
void __iomem *base;
int extal_mhz = 0;
u32 freq;
- /* At Linux boot time the r8a7790 arch timer comes up
- * with the counter disabled. Moreover, it may also report
- * a potentially incorrect fixed 13 MHz frequency. To be
- * correct these registers need to be updated to use the
- * frequency EXTAL / 2 which can be determined by the MD pins.
- */
-
- switch (mode & (MD(14) | MD(13))) {
- case 0:
- extal_mhz = 15;
- break;
- case MD(13):
- extal_mhz = 20;
- break;
- case MD(14):
- extal_mhz = 26;
- break;
- case MD(13) | MD(14):
- extal_mhz = 30;
- break;
+ if (is_e2) {
+ freq = 260000000 / 8; /* ZS / 8 */
+ /* CNTVOFF has to be initialized either from non-secure
+ * Hypervisor mode or secure Monitor mode with SCR.NS==1.
+ * If TrustZone is enabled then it should be handled by the
+ * secure code.
+ */
+ asm volatile(
+ " cps 0x16\n"
+ " mrc p15, 0, r1, c1, c1, 0\n"
+ " orr r0, r1, #1\n"
+ " mcr p15, 0, r0, c1, c1, 0\n"
+ " isb\n"
+ " mov r0, #0\n"
+ " mcrr p15, 4, r0, r0, c14\n"
+ " isb\n"
+ " mcr p15, 0, r1, c1, c1, 0\n"
+ " isb\n"
+ " cps 0x13\n"
+ : : : "r0", "r1");
+ } else {
+ /* At Linux boot time the r8a7790 arch timer comes up
+ * with the counter disabled. Moreover, it may also report
+ * a potentially incorrect fixed 13 MHz frequency. To be
+ * correct these registers need to be updated to use the
+ * frequency EXTAL / 2 which can be determined by the MD pins.
+ */
+
+ switch (mode & (MD(14) | MD(13))) {
+ case 0:
+ extal_mhz = 15;
+ break;
+ case MD(13):
+ extal_mhz = 20;
+ break;
+ case MD(14):
+ extal_mhz = 26;
+ break;
+ case MD(13) | MD(14):
+ extal_mhz = 30;
+ break;
+ }
+
+ /* The arch timer frequency equals EXTAL / 2 */
+ freq = extal_mhz * (1000000 / 2);
}
- /* The arch timer frequency equals EXTAL / 2 */
- freq = extal_mhz * (1000000 / 2);
-
/* Remap "armgcnt address map" space */
base = ioremap(0xe6080000, PAGE_SIZE);
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include "sh7372.h"
static struct map_desc sh7372_io_desc[] __initdata = {
- /* create a 1:1 entity map for 0xe6xxxxxx
+ /* create a 1:1 identity mapping for 0xe6xxxxxx
* used by CPGA, INTC and PFC.
*/
{
void __init sh7372_map_io(void)
{
+ debug_ll_io_init();
iotable_init(sh7372_io_desc, ARRAY_SIZE(sh7372_io_desc));
}
.init_irq = sh7372_init_irq,
.handle_irq = shmobile_handle_irq_intc,
.init_machine = sh7372_add_standard_devices_dt,
+ .init_late = shmobile_init_late,
.dt_compat = sh7372_boards_compat_dt,
MACHINE_END
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/of_platform.h>
#include <linux/delay.h>
#include <linux/input.h>
+#include <linux/i2c/i2c-sh_mobile.h>
#include <linux/io.h>
#include <linux/serial_sci.h>
#include <linux/sh_dma.h>
#include "sh73a0.h"
static struct map_desc sh73a0_io_desc[] __initdata = {
- /* create a 1:1 entity map for 0xe6xxxxxx
+ /* create a 1:1 identity mapping for 0xe6xxxxxx
* used by CPGA, INTC and PFC.
*/
{
void __init sh73a0_map_io(void)
{
+ debug_ll_io_init();
iotable_init(sh73a0_io_desc, ARRAY_SIZE(sh73a0_io_desc));
}
},
};
+static struct i2c_sh_mobile_platform_data i2c_platform_data = {
+ .clks_per_count = 2,
+};
+
static struct platform_device i2c0_device = {
.name = "i2c-sh_mobile",
.id = 0,
.resource = i2c0_resources,
.num_resources = ARRAY_SIZE(i2c0_resources),
+ .dev = {
+ .platform_data = &i2c_platform_data,
+ },
};
static struct platform_device i2c1_device = {
.id = 1,
.resource = i2c1_resources,
.num_resources = ARRAY_SIZE(i2c1_resources),
+ .dev = {
+ .platform_data = &i2c_platform_data,
+ },
};
static struct platform_device i2c2_device = {
.id = 2,
.resource = i2c2_resources,
.num_resources = ARRAY_SIZE(i2c2_resources),
+ .dev = {
+ .platform_data = &i2c_platform_data,
+ },
};
static struct platform_device i2c3_device = {
.id = 3,
.resource = i2c3_resources,
.num_resources = ARRAY_SIZE(i2c3_resources),
+ .dev = {
+ .platform_data = &i2c_platform_data,
+ },
};
static struct platform_device i2c4_device = {
.id = 4,
.resource = i2c4_resources,
.num_resources = ARRAY_SIZE(i2c4_resources),
+ .dev = {
+ .platform_data = &i2c_platform_data,
+ },
};
static const struct sh_dmae_slave_config sh73a0_dmae_slaves[] = {
ARRAY_SIZE(sh73a0_late_devices));
}
-void __init sh73a0_init_delay(void)
-{
- shmobile_init_delay();
-}
-
/* do nothing for !CONFIG_SMP or !CONFIG_HAVE_TWD */
void __init __weak sh73a0_register_twd(void) { }
void __init sh73a0_earlytimer_init(void)
{
- sh73a0_init_delay();
+ shmobile_init_delay();
sh73a0_clock_init();
shmobile_earlytimer_init();
sh73a0_register_twd();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
+#define RESCNT2 IOMEM(0xe6188020)
+static void sh73a0_restart(enum reboot_mode mode, const char *cmd)
+{
+ /* Do soft power on reset */
+ writel((1 << 31), RESCNT2);
+}
+
static const char *sh73a0_boards_compat_dt[] __initdata = {
"renesas,sh73a0",
NULL,
DT_MACHINE_START(SH73A0_DT, "Generic SH73A0 (Flattened Device Tree)")
.smp = smp_ops(sh73a0_smp_ops),
.map_io = sh73a0_map_io,
- .init_early = sh73a0_init_delay,
+ .init_early = shmobile_init_delay,
.init_machine = sh73a0_add_standard_devices_dt,
.init_late = shmobile_init_late,
+ .restart = sh73a0_restart,
.dt_compat = sh73a0_boards_compat_dt,
MACHINE_END
#endif /* CONFIG_USE_OF */
#define SH73A0_PINT0_IRQ(irq) ((irq) + 700)
#define SH73A0_PINT1_IRQ(irq) ((irq) + 732)
-extern void sh73a0_init_delay(void);
extern void sh73a0_init_irq(void);
extern void sh73a0_init_irq_dt(void);
extern void sh73a0_map_io(void);
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR /PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
*/
#include <linux/linkage.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <asm/smp_plat.h>
#include "common.h"
+#include "platsmp-apmu.h"
#include "pm-rcar.h"
#include "r8a7790.h"
.isr_bit = 21, /* CA7-SCU */
};
+static struct rcar_apmu_config r8a7790_apmu_config[] = {
+ {
+ .iomem = DEFINE_RES_MEM(0xe6152000, 0x88),
+ .cpus = { 0, 1, 2, 3 },
+ },
+ {
+ .iomem = DEFINE_RES_MEM(0xe6151000, 0x88),
+ .cpus = { 0x100, 0x0101, 0x102, 0x103 },
+ }
+};
+
static void __init r8a7790_smp_prepare_cpus(unsigned int max_cpus)
{
/* let APMU code install data related to shmobile_boot_vector */
- shmobile_smp_apmu_prepare_cpus(max_cpus);
+ shmobile_smp_apmu_prepare_cpus(max_cpus,
+ r8a7790_apmu_config,
+ ARRAY_SIZE(r8a7790_apmu_config));
/* turn on power to SCU */
r8a7790_pm_init();
#include <asm/smp_plat.h>
#include "common.h"
+#include "platsmp-apmu.h"
#include "r8a7791.h"
#include "rcar-gen2.h"
+static struct rcar_apmu_config r8a7791_apmu_config[] = {
+ {
+ .iomem = DEFINE_RES_MEM(0xe6152000, 0x88),
+ .cpus = { 0, 1 },
+ }
+};
+
static void __init r8a7791_smp_prepare_cpus(unsigned int max_cpus)
{
/* let APMU code install data related to shmobile_boot_vector */
- shmobile_smp_apmu_prepare_cpus(max_cpus);
+ shmobile_smp_apmu_prepare_cpus(max_cpus,
+ r8a7791_apmu_config,
+ ARRAY_SIZE(r8a7791_apmu_config));
r8a7791_pm_init();
}
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <linux/kernel.h>
#include <linux/init.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
- *
*/
#include <linux/platform_device.h>
#include <linux/clocksource.h>
struct device_node *np, *cpus;
bool is_a7_a8_a9 = false;
bool is_a15 = false;
+ bool has_arch_timer = false;
u32 max_freq = 0;
cpus = of_find_node_by_path("/cpus");
if (!of_property_read_u32(np, "clock-frequency", &freq))
max_freq = max(max_freq, freq);
- if (of_device_is_compatible(np, "arm,cortex-a7") ||
- of_device_is_compatible(np, "arm,cortex-a8") ||
- of_device_is_compatible(np, "arm,cortex-a9"))
+ if (of_device_is_compatible(np, "arm,cortex-a8") ||
+ of_device_is_compatible(np, "arm,cortex-a9")) {
is_a7_a8_a9 = true;
- else if (of_device_is_compatible(np, "arm,cortex-a15"))
+ } else if (of_device_is_compatible(np, "arm,cortex-a7")) {
+ is_a7_a8_a9 = true;
+ has_arch_timer = true;
+ } else if (of_device_is_compatible(np, "arm,cortex-a15")) {
is_a15 = true;
+ has_arch_timer = true;
+ }
}
of_node_put(cpus);
if (!max_freq)
return;
- if (is_a7_a8_a9)
- shmobile_setup_delay_hz(max_freq, 1, 3);
- else if (is_a15 && !IS_ENABLED(CONFIG_ARM_ARCH_TIMER))
- shmobile_setup_delay_hz(max_freq, 2, 4);
+ if (!has_arch_timer || !IS_ENABLED(CONFIG_ARM_ARCH_TIMER)) {
+ if (is_a7_a8_a9)
+ shmobile_setup_delay_hz(max_freq, 1, 3);
+ else if (is_a15)
+ shmobile_setup_delay_hz(max_freq, 2, 4);
+ }
}
static void __init shmobile_late_time_init(void)
#define __MACH_CORE_H
#define SOCFPGA_RSTMGR_CTRL 0x04
+#define SOCFPGA_RSTMGR_MODMPURST 0x10
#define SOCFPGA_RSTMGR_MODPERRST 0x14
#define SOCFPGA_RSTMGR_BRGMODRST 0x1c
#define RSTMGR_CTRL_SWCOLDRSTREQ 0x1 /* Cold Reset */
#define RSTMGR_CTRL_SWWARMRSTREQ 0x2 /* Warm Reset */
+#define RSTMGR_MPUMODRST_CPU1 0x2 /* CPU1 Reset */
+
extern void socfpga_secondary_startup(void);
extern void __iomem *socfpga_scu_base_addr;
extern struct smp_operations socfpga_smp_ops;
extern char secondary_trampoline, secondary_trampoline_end;
-extern unsigned long cpu1start_addr;
+extern unsigned long socfpga_cpu1start_addr;
#define SOCFPGA_SCU_VIRT_BASE 0xfffec000
*/
#include <linux/linkage.h>
#include <linux/init.h>
+#include <asm/memory.h>
.arch armv7-a
ENTRY(secondary_trampoline)
- movw r2, #:lower16:cpu1start_addr
- movt r2, #:upper16:cpu1start_addr
-
- /* The socfpga VT cannot handle a 0xC0000000 page offset when loading
- the cpu1start_addr, we bit clear it. Tested on HW and VT. */
- bic r2, r2, #0x40000000
-
- ldr r0, [r2]
- ldr r1, [r0]
- bx r1
+ /* CPU1 will always fetch from 0x0 when it is brought out of reset.
+ * Thus, we can just subtract the PAGE_OFFSET to get the physical
+ * address of &cpu1start_addr. This would not work for platforms
+ * where the physical memory does not start at 0x0.
+ */
+ adr r0, 1f
+ ldmia r0, {r1, r2}
+ sub r2, r2, #PAGE_OFFSET
+ ldr r3, [r2]
+ ldr r4, [r3]
+ bx r4
+ .align
+1: .long .
+ .long socfpga_cpu1start_addr
ENTRY(secondary_trampoline_end)
ENTRY(socfpga_secondary_startup)
{
int trampoline_size = &secondary_trampoline_end - &secondary_trampoline;
- if (cpu1start_addr) {
+ if (socfpga_cpu1start_addr) {
+ /* This will put CPU #1 into reset. */
+ writel(RSTMGR_MPUMODRST_CPU1,
+ rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST);
+
memcpy(phys_to_virt(0), &secondary_trampoline, trampoline_size);
- __raw_writel(virt_to_phys(socfpga_secondary_startup),
- (sys_manager_base_addr + (cpu1start_addr & 0x000000ff)));
+ writel(virt_to_phys(socfpga_secondary_startup),
+ sys_manager_base_addr + (socfpga_cpu1start_addr & 0x000000ff));
flush_cache_all();
smp_wmb();
outer_clean_range(0, trampoline_size);
- /* This will release CPU #1 out of reset.*/
- __raw_writel(0, rst_manager_base_addr + 0x10);
+ /* This will release CPU #1 out of reset. */
+ writel(0, rst_manager_base_addr + SOCFPGA_RSTMGR_MODMPURST);
}
return 0;
*/
static void socfpga_cpu_die(unsigned int cpu)
{
- cpu_do_idle();
-
- /* We should have never returned from idle */
- panic("cpu %d unexpectedly exit from shutdown\n", cpu);
+ /* Do WFI. If we wake up early, go back into WFI */
+ while (1)
+ cpu_do_idle();
}
struct smp_operations socfpga_smp_ops __initdata = {
void __iomem *socfpga_scu_base_addr = ((void __iomem *)(SOCFPGA_SCU_VIRT_BASE));
void __iomem *sys_manager_base_addr;
void __iomem *rst_manager_base_addr;
-unsigned long cpu1start_addr;
+unsigned long socfpga_cpu1start_addr;
static struct map_desc scu_io_desc __initdata = {
.virtual = SOCFPGA_SCU_VIRT_BASE,
np = of_find_compatible_node(NULL, NULL, "altr,sys-mgr");
if (of_property_read_u32(np, "cpu1-start-addr",
- (u32 *) &cpu1start_addr))
+ (u32 *) &socfpga_cpu1start_addr))
pr_err("SMP: Need cpu1-start-addr in device tree.\n");
sys_manager_base_addr = of_iomap(np, 0);
and other digital audio/video applications using Flattened Device
Trees.
+config SOC_STIH407
+ bool "STiH407 STMicroelectronics Consumer Electronics family"
+ default y
+ select STIH407_RESET
+ help
+ This enables support for STMicroelectronics Digital Consumer
+ Electronics family StiH407 parts, targetted at set-top-box
+ and other digital audio/video applications using Flattened Device
+ Trees.
+
endif
select MFD_SUN6I_PRCM
select RESET_CONTROLLER
+config MACH_SUN9I
+ bool "Allwinner (sun9i) SoCs support"
+ default ARCH_SUNXI
+ select ARCH_HAS_RESET_CONTROLLER
+ select ARM_GIC
+ select RESET_CONTROLLER
+
endif
return 0;
}
-struct smp_operations sun6i_smp_ops __initdata = {
+static struct smp_operations sun6i_smp_ops __initdata = {
.smp_prepare_cpus = sun6i_smp_prepare_cpus,
.smp_boot_secondary = sun6i_smp_boot_secondary,
};
DT_MACHINE_START(SUN8I_DT, "Allwinner sun8i (A23) Family")
.dt_compat = sun8i_board_dt_compat,
MACHINE_END
+
+static const char * const sun9i_board_dt_compat[] = {
+ "allwinner,sun9i-a80",
+ NULL,
+};
+
+DT_MACHINE_START(SUN9I_DT, "Allwinner sun9i Family")
+ .dt_compat = sun9i_board_dt_compat,
+MACHINE_END
bool "NVIDIA Tegra" if ARCH_MULTI_V7
select ARCH_REQUIRE_GPIOLIB
select ARCH_SUPPORTS_TRUSTED_FOUNDATIONS
+ select ARM_AMBA
select ARM_GIC
select CLKSRC_MMIO
select HAVE_ARM_SCU if SMP
Support for NVIDIA Tegra T124 processor family, based on the
ARM CortexA15MP CPU
-config TEGRA_AHB
- bool "Enable AHB driver for NVIDIA Tegra SoCs"
- default y
- help
- Adds AHB configuration functionality for NVIDIA Tegra SoCs,
- which controls AHB bus master arbitration and some
- performance parameters(priority, prefech size).
-
endif
call_firmware_op(prepare_idle);
/* Do suspend by ourselves if the firmware does not implement it */
- if (call_firmware_op(do_idle) == -ENOSYS)
+ if (call_firmware_op(do_idle, 0) == -ENOSYS)
cpu_suspend(0, tegra30_sleep_cpu_secondary_finish);
clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &dev->cpu);
static void tegra_mask(struct irq_data *d)
{
- if (d->irq < FIRST_LEGACY_IRQ)
+ if (d->hwirq < FIRST_LEGACY_IRQ)
return;
- tegra_irq_write_mask(d->irq, ICTLR_CPU_IER_CLR);
+ tegra_irq_write_mask(d->hwirq, ICTLR_CPU_IER_CLR);
}
static void tegra_unmask(struct irq_data *d)
{
- if (d->irq < FIRST_LEGACY_IRQ)
+ if (d->hwirq < FIRST_LEGACY_IRQ)
return;
- tegra_irq_write_mask(d->irq, ICTLR_CPU_IER_SET);
+ tegra_irq_write_mask(d->hwirq, ICTLR_CPU_IER_SET);
}
static void tegra_ack(struct irq_data *d)
{
- if (d->irq < FIRST_LEGACY_IRQ)
+ if (d->hwirq < FIRST_LEGACY_IRQ)
return;
- tegra_irq_write_mask(d->irq, ICTLR_CPU_IEP_FIR_CLR);
+ tegra_irq_write_mask(d->hwirq, ICTLR_CPU_IEP_FIR_CLR);
}
static void tegra_eoi(struct irq_data *d)
{
- if (d->irq < FIRST_LEGACY_IRQ)
+ if (d->hwirq < FIRST_LEGACY_IRQ)
return;
- tegra_irq_write_mask(d->irq, ICTLR_CPU_IEP_FIR_CLR);
+ tegra_irq_write_mask(d->hwirq, ICTLR_CPU_IEP_FIR_CLR);
}
static int tegra_retrigger(struct irq_data *d)
{
- if (d->irq < FIRST_LEGACY_IRQ)
+ if (d->hwirq < FIRST_LEGACY_IRQ)
return 0;
- tegra_irq_write_mask(d->irq, ICTLR_CPU_IEP_FIR_SET);
+ tegra_irq_write_mask(d->hwirq, ICTLR_CPU_IEP_FIR_SET);
return 1;
}
#ifdef CONFIG_PM_SLEEP
static int tegra_set_wake(struct irq_data *d, unsigned int enable)
{
- u32 irq = d->irq;
+ u32 irq = d->hwirq;
u32 index, mask;
if (irq < FIRST_LEGACY_IRQ ||
THUMB( it ne )
bne cpu_resume @ no
+ tegra_get_soc_id TEGRA_APB_MISC_BASE, r6
/* Are we on Tegra20? */
cmp r6, #TEGRA20
beq 1f @ Yes
"in 8bit mode\n");
status = spi_w8r8(spi, 0xAA);
if (status < 0)
- pr_warning("Siple test 1: FAILURE: spi_write_then_read "
- "failed with status %d\n", status);
+ pr_warn("Simple test 1: FAILURE: spi_write_then_read failed with status %d\n",
+ status);
else
pr_info("Simple test 1: SUCCESS!\n");
"in 8bit mode (full FIFO)\n");
status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
if (status < 0)
- pr_warning("Simple test 2: FAILURE: spi_write_then_read() "
- "failed with status %d\n", status);
+ pr_warn("Simple test 2: FAILURE: spi_write_then_read() failed with status %d\n",
+ status);
else
pr_info("Simple test 2: SUCCESS!\n");
"in 8bit mode (see if we overflow FIFO)\n");
status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
if (status < 0)
- pr_warning("Simple test 3: FAILURE: failed with status %d "
- "(probably FIFO overrun)\n", status);
+ pr_warn("Simple test 3: FAILURE: failed with status %d (probably FIFO overrun)\n",
+ status);
else
pr_info("Simple test 3: SUCCESS!\n");
"bytes garbage with spi_read() in 8bit mode\n");
status = spi_write(spi, &txbuf[0], 8);
if (status < 0)
- pr_warning("Simple test 4 step 1: FAILURE: spi_write() "
- "failed with status %d\n", status);
+ pr_warn("Simple test 4 step 1: FAILURE: spi_write() failed with status %d\n",
+ status);
else
pr_info("Simple test 4 step 1: SUCCESS!\n");
status = spi_read(spi, &rxbuf[0], 8);
if (status < 0)
- pr_warning("Simple test 4 step 2: FAILURE: spi_read() "
- "failed with status %d\n", status);
+ pr_warn("Simple test 4 step 2: FAILURE: spi_read() failed with status %d\n",
+ status);
else
pr_info("Simple test 4 step 2: SUCCESS!\n");
"14 bytes garbage with spi_read() in 8bit mode\n");
status = spi_write(spi, &txbuf[0], 14);
if (status < 0)
- pr_warning("Simple test 5 step 1: FAILURE: spi_write() "
- "failed with status %d (probably FIFO overrun)\n",
- status);
+ pr_warn("Simple test 5 step 1: FAILURE: spi_write() failed with status %d (probably FIFO overrun)\n",
+ status);
else
pr_info("Simple test 5 step 1: SUCCESS!\n");
status = spi_read(spi, &rxbuf[0], 14);
if (status < 0)
- pr_warning("Simple test 5 step 2: FAILURE: spi_read() "
- "failed with status %d (probably FIFO overrun)\n",
- status);
+ pr_warn("Simple test 5 step 2: FAILURE: spi_read() failed with status %d (probably FIFO overrun)\n",
+ status);
else
pr_info("Simple test 5: SUCCESS!\n");
DMA_TEST_SIZE, DMA_TEST_SIZE);
status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
if (status < 0)
- pr_warning("Simple test 6 step 1: FAILURE: spi_write() "
- "failed with status %d (probably FIFO overrun)\n",
- status);
+ pr_warn("Simple test 6 step 1: FAILURE: spi_write() failed with status %d (probably FIFO overrun)\n",
+ status);
else
pr_info("Simple test 6 step 1: SUCCESS!\n");
status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
if (status < 0)
- pr_warning("Simple test 6 step 2: FAILURE: spi_read() "
- "failed with status %d (probably FIFO overrun)\n",
- status);
+ pr_warn("Simple test 6 step 2: FAILURE: spi_read() failed with status %d (probably FIFO overrun)\n",
+ status);
else
pr_info("Simple test 6: SUCCESS!\n");
pr_info("Simple test 7: SUCCESS! (expected failure with "
"status EIO)\n");
else if (status < 0)
- pr_warning("Siple test 7: FAILURE: spi_write_then_read "
- "failed with status %d\n", status);
+ pr_warn("Simple test 7: FAILURE: spi_write_then_read failed with status %d\n",
+ status);
else
- pr_warning("Siple test 7: FAILURE: spi_write_then_read "
- "succeeded but it was expected to fail!\n");
+ pr_warn("Simple test 7: FAILURE: spi_write_then_read succeeded but it was expected to fail!\n");
pr_info("Simple test 8: write 8 bytes, read back 8 bytes garbage "
"in 16bit mode (full FIFO)\n");
status = spi_write_then_read(spi, &txbuf[0], 8, &rxbuf[0], 8);
if (status < 0)
- pr_warning("Simple test 8: FAILURE: spi_write_then_read() "
- "failed with status %d\n", status);
+ pr_warn("Simple test 8: FAILURE: spi_write_then_read() failed with status %d\n",
+ status);
else
pr_info("Simple test 8: SUCCESS!\n");
"in 16bit mode (see if we overflow FIFO)\n");
status = spi_write_then_read(spi, &txbuf[0], 14, &rxbuf[0], 14);
if (status < 0)
- pr_warning("Simple test 9: FAILURE: failed with status %d "
- "(probably FIFO overrun)\n", status);
+ pr_warn("Simple test 9: FAILURE: failed with status %d (probably FIFO overrun)\n",
+ status);
else
pr_info("Simple test 9: SUCCESS!\n");
DMA_TEST_SIZE, DMA_TEST_SIZE);
status = spi_write(spi, &bigtxbuf_virtual[0], DMA_TEST_SIZE);
if (status < 0)
- pr_warning("Simple test 10 step 1: FAILURE: spi_write() "
- "failed with status %d (probably FIFO overrun)\n",
- status);
+ pr_warn("Simple test 10 step 1: FAILURE: spi_write() failed with status %d (probably FIFO overrun)\n",
+ status);
else
pr_info("Simple test 10 step 1: SUCCESS!\n");
status = spi_read(spi, &bigrxbuf_virtual[0], DMA_TEST_SIZE);
if (status < 0)
- pr_warning("Simple test 10 step 2: FAILURE: spi_read() "
- "failed with status %d (probably FIFO overrun)\n",
- status);
+ pr_warn("Simple test 10 step 2: FAILURE: spi_read() failed with status %d (probably FIFO overrun)\n",
+ status);
else
pr_info("Simple test 10: SUCCESS!\n");
select PINCTRL_AB8540
select REGULATOR
select REGULATOR_DB8500_PRCMU
+ select PM_GENERIC_DOMAINS if PM
config MACH_MOP500
bool "U8500 Development platform, MOP500 versions"
board-mop500-audio.o
obj-$(CONFIG_SMP) += platsmp.o headsmp.o
obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o
+obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
CFLAGS_hotplug.o += -march=armv7-a
#include <linux/platform_data/arm-ux500-pm.h>
#include "db8500-regs.h"
+#include "pm_domains.h"
/* ARM WFI Standby signal register */
#define PRCM_ARM_WFI_STANDBY (prcmu_base + 0x130)
/* Set up ux500 suspend callbacks. */
suspend_set_ops(UX500_SUSPEND_OPS);
+
+ /* Initialize ux500 power domains */
+ ux500_pm_domains_init();
}
--- /dev/null
+/*
+ * Copyright (C) 2014 Linaro Ltd.
+ *
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ * License terms: GNU General Public License (GPL) version 2
+ *
+ * Implements PM domains using the generic PM domain for ux500.
+ */
+#include <linux/printk.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/pm_domain.h>
+
+#include <dt-bindings/arm/ux500_pm_domains.h>
+#include "pm_domains.h"
+
+static int pd_power_off(struct generic_pm_domain *domain)
+{
+ /*
+ * Handle the gating of the PM domain regulator here.
+ *
+ * Drivers/subsystems handling devices in the PM domain needs to perform
+ * register context save/restore from their respective runtime PM
+ * callbacks, to be able to enable PM domain gating/ungating.
+ */
+ return 0;
+}
+
+static int pd_power_on(struct generic_pm_domain *domain)
+{
+ /*
+ * Handle the ungating of the PM domain regulator here.
+ *
+ * Drivers/subsystems handling devices in the PM domain needs to perform
+ * register context save/restore from their respective runtime PM
+ * callbacks, to be able to enable PM domain gating/ungating.
+ */
+ return 0;
+}
+
+static struct generic_pm_domain ux500_pm_domain_vape = {
+ .name = "VAPE",
+ .power_off = pd_power_off,
+ .power_on = pd_power_on,
+};
+
+static struct generic_pm_domain *ux500_pm_domains[NR_DOMAINS] = {
+ [DOMAIN_VAPE] = &ux500_pm_domain_vape,
+};
+
+static struct of_device_id ux500_pm_domain_matches[] = {
+ { .compatible = "stericsson,ux500-pm-domains", },
+ { },
+};
+
+int __init ux500_pm_domains_init(void)
+{
+ struct device_node *np;
+ struct genpd_onecell_data *genpd_data;
+ int i;
+
+ np = of_find_matching_node(NULL, ux500_pm_domain_matches);
+ if (!np)
+ return -ENODEV;
+
+ genpd_data = kzalloc(sizeof(*genpd_data), GFP_KERNEL);
+ if (!genpd_data)
+ return -ENOMEM;
+
+ genpd_data->domains = ux500_pm_domains;
+ genpd_data->num_domains = ARRAY_SIZE(ux500_pm_domains);
+
+ for (i = 0; i < ARRAY_SIZE(ux500_pm_domains); ++i)
+ pm_genpd_init(ux500_pm_domains[i], NULL, false);
+
+ of_genpd_add_provider_onecell(np, genpd_data);
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (C) 2014 Linaro Ltd.
+ *
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef __MACH_UX500_PM_DOMAINS_H
+#define __MACH_UX500_PM_DOMAINS_H
+
+#ifdef CONFIG_PM_GENERIC_DOMAINS
+extern int __init ux500_pm_domains_init(void);
+#else
+static inline int ux500_pm_domains_init(void) { return 0; }
+#endif
+
+#endif
select POWER_RESET
select POWER_RESET_VEXPRESS
select POWER_SUPPLY
+ select REGULATOR if MMC_ARMMMCI
select REGULATOR_FIXED_VOLTAGE if REGULATOR
select VEXPRESS_CONFIG
select VEXPRESS_SYSCFG
build a working kernel, you must also enable relevant core
tile support or Flattened Device Tree based support options.
-config ARCH_VEXPRESS_CA9X4
- bool "Versatile Express Cortex-A9x4 tile"
-
config ARCH_VEXPRESS_DCSCB
bool "Dual Cluster System Control Block (DCSCB) support"
depends on MCPM
#
# Makefile for the linux kernel.
#
-ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := -I$(srctree)/$(src)/include \
+ccflags-$(CONFIG_ARCH_MULTIPLATFORM) := \
-I$(srctree)/arch/arm/plat-versatile/include
obj-y := v2m.o
-obj-$(CONFIG_ARCH_VEXPRESS_CA9X4) += ct-ca9x4.o
obj-$(CONFIG_ARCH_VEXPRESS_DCSCB) += dcscb.o dcscb_setup.o
CFLAGS_dcscb.o += -march=armv7-a
CFLAGS_REMOVE_dcscb.o = -pg
-/* 2MB large area for motherboard's peripherals static mapping */
-#define V2M_PERIPH 0xf8000000
-
-/* Tile's peripherals static mappings should start here */
-#define V2T_PERIPH 0xf8200000
-
bool vexpress_smp_init_ops(void);
-extern struct smp_operations vexpress_smp_ops;
extern struct smp_operations vexpress_smp_dt_ops;
extern void vexpress_cpu_die(unsigned int cpu);
+++ /dev/null
-/*
- * Versatile Express Core Tile Cortex A9x4 Support
- */
-#include <linux/init.h>
-#include <linux/gfp.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/clcd.h>
-#include <linux/platform_data/video-clcd-versatile.h>
-#include <linux/clkdev.h>
-#include <linux/vexpress.h>
-#include <linux/irqchip/arm-gic.h>
-
-#include <asm/hardware/arm_timer.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/smp_scu.h>
-#include <asm/smp_twd.h>
-
-#include <mach/ct-ca9x4.h>
-
-#include <asm/hardware/timer-sp.h>
-
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-#include "core.h"
-
-#include <mach/motherboard.h>
-#include <mach/irqs.h>
-
-static struct map_desc ct_ca9x4_io_desc[] __initdata = {
- {
- .virtual = V2T_PERIPH,
- .pfn = __phys_to_pfn(CT_CA9X4_MPIC),
- .length = SZ_8K,
- .type = MT_DEVICE,
- },
-};
-
-static void __init ct_ca9x4_map_io(void)
-{
- iotable_init(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
-}
-
-static void __init ca9x4_l2_init(void)
-{
-#ifdef CONFIG_CACHE_L2X0
- void __iomem *l2x0_base = ioremap(CT_CA9X4_L2CC, SZ_4K);
-
- if (l2x0_base) {
- /* set RAM latencies to 1 cycle for this core tile. */
- writel(0, l2x0_base + L310_TAG_LATENCY_CTRL);
- writel(0, l2x0_base + L310_DATA_LATENCY_CTRL);
-
- l2x0_init(l2x0_base, 0x00400000, 0xfe0fffff);
- } else {
- pr_err("L2C: unable to map L2 cache controller\n");
- }
-#endif
-}
-
-#ifdef CONFIG_HAVE_ARM_TWD
-static DEFINE_TWD_LOCAL_TIMER(twd_local_timer, A9_MPCORE_TWD, IRQ_LOCALTIMER);
-
-static void __init ca9x4_twd_init(void)
-{
- int err = twd_local_timer_register(&twd_local_timer);
- if (err)
- pr_err("twd_local_timer_register failed %d\n", err);
-}
-#else
-#define ca9x4_twd_init() do {} while(0)
-#endif
-
-static void __init ct_ca9x4_init_irq(void)
-{
- gic_init(0, 29, ioremap(A9_MPCORE_GIC_DIST, SZ_4K),
- ioremap(A9_MPCORE_GIC_CPU, SZ_256));
- ca9x4_twd_init();
- ca9x4_l2_init();
-}
-
-static int ct_ca9x4_clcd_setup(struct clcd_fb *fb)
-{
- unsigned long framesize = 1024 * 768 * 2;
-
- fb->panel = versatile_clcd_get_panel("XVGA");
- if (!fb->panel)
- return -EINVAL;
-
- return versatile_clcd_setup_dma(fb, framesize);
-}
-
-static struct clcd_board ct_ca9x4_clcd_data = {
- .name = "CT-CA9X4",
- .caps = CLCD_CAP_5551 | CLCD_CAP_565,
- .check = clcdfb_check,
- .decode = clcdfb_decode,
- .setup = ct_ca9x4_clcd_setup,
- .mmap = versatile_clcd_mmap_dma,
- .remove = versatile_clcd_remove_dma,
-};
-
-static AMBA_AHB_DEVICE(clcd, "ct:clcd", 0, CT_CA9X4_CLCDC, IRQ_CT_CA9X4_CLCDC, &ct_ca9x4_clcd_data);
-static AMBA_APB_DEVICE(dmc, "ct:dmc", 0, CT_CA9X4_DMC, IRQ_CT_CA9X4_DMC, NULL);
-static AMBA_APB_DEVICE(smc, "ct:smc", 0, CT_CA9X4_SMC, IRQ_CT_CA9X4_SMC, NULL);
-static AMBA_APB_DEVICE(gpio, "ct:gpio", 0, CT_CA9X4_GPIO, IRQ_CT_CA9X4_GPIO, NULL);
-
-static struct amba_device *ct_ca9x4_amba_devs[] __initdata = {
- &clcd_device,
- &dmc_device,
- &smc_device,
- &gpio_device,
-};
-
-static struct resource pmu_resources[] = {
- [0] = {
- .start = IRQ_CT_CA9X4_PMU_CPU0,
- .end = IRQ_CT_CA9X4_PMU_CPU0,
- .flags = IORESOURCE_IRQ,
- },
- [1] = {
- .start = IRQ_CT_CA9X4_PMU_CPU1,
- .end = IRQ_CT_CA9X4_PMU_CPU1,
- .flags = IORESOURCE_IRQ,
- },
- [2] = {
- .start = IRQ_CT_CA9X4_PMU_CPU2,
- .end = IRQ_CT_CA9X4_PMU_CPU2,
- .flags = IORESOURCE_IRQ,
- },
- [3] = {
- .start = IRQ_CT_CA9X4_PMU_CPU3,
- .end = IRQ_CT_CA9X4_PMU_CPU3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device pmu_device = {
- .name = "arm-pmu",
- .id = -1,
- .num_resources = ARRAY_SIZE(pmu_resources),
- .resource = pmu_resources,
-};
-
-static struct clk_lookup osc1_lookup = {
- .dev_id = "ct:clcd",
-};
-
-static struct platform_device osc1_device = {
- .name = "vexpress-osc",
- .id = 1,
- .num_resources = 1,
- .resource = (struct resource []) {
- VEXPRESS_RES_FUNC(0xf, 1),
- },
- .dev.platform_data = &osc1_lookup,
-};
-
-static void __init ct_ca9x4_init(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(ct_ca9x4_amba_devs); i++)
- amba_device_register(ct_ca9x4_amba_devs[i], &iomem_resource);
-
- platform_device_register(&pmu_device);
- vexpress_syscfg_device_register(&osc1_device);
-}
-
-#ifdef CONFIG_SMP
-static void *ct_ca9x4_scu_base __initdata;
-
-static void __init ct_ca9x4_init_cpu_map(void)
-{
- int i, ncores;
-
- ct_ca9x4_scu_base = ioremap(A9_MPCORE_SCU, SZ_128);
- if (WARN_ON(!ct_ca9x4_scu_base))
- return;
-
- ncores = scu_get_core_count(ct_ca9x4_scu_base);
-
- if (ncores > nr_cpu_ids) {
- pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
- ncores, nr_cpu_ids);
- ncores = nr_cpu_ids;
- }
-
- for (i = 0; i < ncores; ++i)
- set_cpu_possible(i, true);
-}
-
-static void __init ct_ca9x4_smp_enable(unsigned int max_cpus)
-{
- scu_enable(ct_ca9x4_scu_base);
-}
-#endif
-
-struct ct_desc ct_ca9x4_desc __initdata = {
- .id = V2M_CT_ID_CA9,
- .name = "CA9x4",
- .map_io = ct_ca9x4_map_io,
- .init_irq = ct_ca9x4_init_irq,
- .init_tile = ct_ca9x4_init,
-#ifdef CONFIG_SMP
- .init_cpu_map = ct_ca9x4_init_cpu_map,
- .smp_enable = ct_ca9x4_smp_enable,
-#endif
-};
+++ /dev/null
-#ifndef __MACH_CT_CA9X4_H
-#define __MACH_CT_CA9X4_H
-
-/*
- * Physical base addresses
- */
-#define CT_CA9X4_CLCDC (0x10020000)
-#define CT_CA9X4_AXIRAM (0x10060000)
-#define CT_CA9X4_DMC (0x100e0000)
-#define CT_CA9X4_SMC (0x100e1000)
-#define CT_CA9X4_SCC (0x100e2000)
-#define CT_CA9X4_SP804_TIMER (0x100e4000)
-#define CT_CA9X4_SP805_WDT (0x100e5000)
-#define CT_CA9X4_TZPC (0x100e6000)
-#define CT_CA9X4_GPIO (0x100e8000)
-#define CT_CA9X4_FASTAXI (0x100e9000)
-#define CT_CA9X4_SLOWAXI (0x100ea000)
-#define CT_CA9X4_TZASC (0x100ec000)
-#define CT_CA9X4_CORESIGHT (0x10200000)
-#define CT_CA9X4_MPIC (0x1e000000)
-#define CT_CA9X4_SYSTIMER (0x1e004000)
-#define CT_CA9X4_SYSWDT (0x1e007000)
-#define CT_CA9X4_L2CC (0x1e00a000)
-
-#define A9_MPCORE_SCU (CT_CA9X4_MPIC + 0x0000)
-#define A9_MPCORE_GIC_CPU (CT_CA9X4_MPIC + 0x0100)
-#define A9_MPCORE_GIT (CT_CA9X4_MPIC + 0x0200)
-#define A9_MPCORE_TWD (CT_CA9X4_MPIC + 0x0600)
-#define A9_MPCORE_GIC_DIST (CT_CA9X4_MPIC + 0x1000)
-
-/*
- * Interrupts. Those in {} are for AMBA devices
- */
-#define IRQ_CT_CA9X4_CLCDC { 76 }
-#define IRQ_CT_CA9X4_DMC { 0 }
-#define IRQ_CT_CA9X4_SMC { 77, 78 }
-#define IRQ_CT_CA9X4_TIMER0 80
-#define IRQ_CT_CA9X4_TIMER1 81
-#define IRQ_CT_CA9X4_GPIO { 82 }
-#define IRQ_CT_CA9X4_PMU_CPU0 92
-#define IRQ_CT_CA9X4_PMU_CPU1 93
-#define IRQ_CT_CA9X4_PMU_CPU2 94
-#define IRQ_CT_CA9X4_PMU_CPU3 95
-
-extern struct ct_desc ct_ca9x4_desc;
-
-#endif
+++ /dev/null
-/* empty */
+++ /dev/null
-#define IRQ_LOCALTIMER 29
-#define IRQ_LOCALWDOG 30
-
-#ifndef CONFIG_SPARSE_IRQ
-#define NR_IRQS 256
-#endif
+++ /dev/null
-#ifndef __MACH_MOTHERBOARD_H
-#define __MACH_MOTHERBOARD_H
-
-/*
- * Physical addresses, offset from V2M_PA_CS0-3
- */
-#define V2M_NOR0 (V2M_PA_CS0)
-#define V2M_NOR1 (V2M_PA_CS1)
-#define V2M_SRAM (V2M_PA_CS2)
-#define V2M_VIDEO_SRAM (V2M_PA_CS3 + 0x00000000)
-#define V2M_LAN9118 (V2M_PA_CS3 + 0x02000000)
-#define V2M_ISP1761 (V2M_PA_CS3 + 0x03000000)
-
-/*
- * Physical addresses, offset from V2M_PA_CS7
- */
-#define V2M_SYSREGS (V2M_PA_CS7 + 0x00000000)
-#define V2M_SYSCTL (V2M_PA_CS7 + 0x00001000)
-#define V2M_SERIAL_BUS_PCI (V2M_PA_CS7 + 0x00002000)
-
-#define V2M_AACI (V2M_PA_CS7 + 0x00004000)
-#define V2M_MMCI (V2M_PA_CS7 + 0x00005000)
-#define V2M_KMI0 (V2M_PA_CS7 + 0x00006000)
-#define V2M_KMI1 (V2M_PA_CS7 + 0x00007000)
-
-#define V2M_UART0 (V2M_PA_CS7 + 0x00009000)
-#define V2M_UART1 (V2M_PA_CS7 + 0x0000a000)
-#define V2M_UART2 (V2M_PA_CS7 + 0x0000b000)
-#define V2M_UART3 (V2M_PA_CS7 + 0x0000c000)
-
-#define V2M_WDT (V2M_PA_CS7 + 0x0000f000)
-
-#define V2M_TIMER01 (V2M_PA_CS7 + 0x00011000)
-#define V2M_TIMER23 (V2M_PA_CS7 + 0x00012000)
-
-#define V2M_SERIAL_BUS_DVI (V2M_PA_CS7 + 0x00016000)
-#define V2M_RTC (V2M_PA_CS7 + 0x00017000)
-
-#define V2M_CF (V2M_PA_CS7 + 0x0001a000)
-#define V2M_CLCD (V2M_PA_CS7 + 0x0001f000)
-
-
-/*
- * Interrupts. Those in {} are for AMBA devices
- */
-#define IRQ_V2M_WDT { (32 + 0) }
-#define IRQ_V2M_TIMER0 (32 + 2)
-#define IRQ_V2M_TIMER1 (32 + 2)
-#define IRQ_V2M_TIMER2 (32 + 3)
-#define IRQ_V2M_TIMER3 (32 + 3)
-#define IRQ_V2M_RTC { (32 + 4) }
-#define IRQ_V2M_UART0 { (32 + 5) }
-#define IRQ_V2M_UART1 { (32 + 6) }
-#define IRQ_V2M_UART2 { (32 + 7) }
-#define IRQ_V2M_UART3 { (32 + 8) }
-#define IRQ_V2M_MMCI { (32 + 9), (32 + 10) }
-#define IRQ_V2M_AACI { (32 + 11) }
-#define IRQ_V2M_KMI0 { (32 + 12) }
-#define IRQ_V2M_KMI1 { (32 + 13) }
-#define IRQ_V2M_CLCD { (32 + 14) }
-#define IRQ_V2M_LAN9118 (32 + 15)
-#define IRQ_V2M_ISP1761 (32 + 16)
-#define IRQ_V2M_PCIE (32 + 17)
-
-
-/*
- * Core tile IDs
- */
-#define V2M_CT_ID_CA9 0x0c000191
-#define V2M_CT_ID_UNSUPPORTED 0xff000191
-#define V2M_CT_ID_MASK 0xff000fff
-
-struct ct_desc {
- u32 id;
- const char *name;
- void (*map_io)(void);
- void (*init_early)(void);
- void (*init_irq)(void);
- void (*init_tile)(void);
-#ifdef CONFIG_SMP
- void (*init_cpu_map)(void);
- void (*smp_enable)(unsigned int);
-#endif
-};
-
-extern struct ct_desc *ct_desc;
-
-#endif
#include <asm/smp_scu.h>
#include <asm/mach/map.h>
-#include <mach/motherboard.h>
-
#include <plat/platsmp.h>
#include "core.h"
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-static void __init vexpress_smp_init_cpus(void)
-{
- ct_desc->init_cpu_map();
-}
-
-static void __init vexpress_smp_prepare_cpus(unsigned int max_cpus)
-{
- /*
- * Initialise the present map, which describes the set of CPUs
- * actually populated at the present time.
- */
- ct_desc->smp_enable(max_cpus);
-
- /*
- * Write the address of secondary startup into the
- * system-wide flags register. The boot monitor waits
- * until it receives a soft interrupt, and then the
- * secondary CPU branches to this address.
- */
- vexpress_flags_set(virt_to_phys(versatile_secondary_startup));
-}
-
-struct smp_operations __initdata vexpress_smp_ops = {
- .smp_init_cpus = vexpress_smp_init_cpus,
- .smp_prepare_cpus = vexpress_smp_prepare_cpus,
- .smp_secondary_init = versatile_secondary_init,
- .smp_boot_secondary = versatile_boot_secondary,
-#ifdef CONFIG_HOTPLUG_CPU
- .cpu_die = vexpress_cpu_die,
-#endif
-};
-
bool __init vexpress_smp_init_ops(void)
{
#ifdef CONFIG_MCPM
return false;
}
-#if defined(CONFIG_OF)
-
static const struct of_device_id vexpress_smp_dt_scu_match[] __initconst = {
{ .compatible = "arm,cortex-a5-scu", },
{ .compatible = "arm,cortex-a9-scu", },
.cpu_die = vexpress_cpu_die,
#endif
};
-
-#endif
-/*
- * Versatile Express V2M Motherboard Support
- */
-#include <linux/device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/mmci.h>
-#include <linux/io.h>
-#include <linux/smp.h>
-#include <linux/init.h>
-#include <linux/of_address.h>
-#include <linux/of_fdt.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/platform_device.h>
-#include <linux/ata_platform.h>
-#include <linux/smsc911x.h>
-#include <linux/spinlock.h>
-#include <linux/usb/isp1760.h>
-#include <linux/mtd/physmap.h>
-#include <linux/regulator/fixed.h>
-#include <linux/regulator/machine.h>
-#include <linux/vexpress.h>
-#include <linux/clkdev.h>
-
-#include <asm/mach-types.h>
-#include <asm/sizes.h>
#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-#include <asm/hardware/arm_timer.h>
-#include <asm/hardware/cache-l2x0.h>
-#include <asm/hardware/timer-sp.h>
-
-#include <mach/ct-ca9x4.h>
-#include <mach/motherboard.h>
-
-#include <plat/sched_clock.h>
-#include <plat/platsmp.h>
#include "core.h"
-#define V2M_PA_CS0 0x40000000
-#define V2M_PA_CS1 0x44000000
-#define V2M_PA_CS2 0x48000000
-#define V2M_PA_CS3 0x4c000000
-#define V2M_PA_CS7 0x10000000
-
-static struct map_desc v2m_io_desc[] __initdata = {
- {
- .virtual = V2M_PERIPH,
- .pfn = __phys_to_pfn(V2M_PA_CS7),
- .length = SZ_128K,
- .type = MT_DEVICE,
- },
-};
-
-static void __init v2m_sp804_init(void __iomem *base, unsigned int irq)
-{
- if (WARN_ON(!base || irq == NO_IRQ))
- return;
-
- sp804_clocksource_init(base + TIMER_2_BASE, "v2m-timer1");
- sp804_clockevents_init(base + TIMER_1_BASE, irq, "v2m-timer0");
-}
-
-
-static struct resource v2m_pcie_i2c_resource = {
- .start = V2M_SERIAL_BUS_PCI,
- .end = V2M_SERIAL_BUS_PCI + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device v2m_pcie_i2c_device = {
- .name = "versatile-i2c",
- .id = 0,
- .num_resources = 1,
- .resource = &v2m_pcie_i2c_resource,
-};
-
-static struct resource v2m_ddc_i2c_resource = {
- .start = V2M_SERIAL_BUS_DVI,
- .end = V2M_SERIAL_BUS_DVI + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
-};
-
-static struct platform_device v2m_ddc_i2c_device = {
- .name = "versatile-i2c",
- .id = 1,
- .num_resources = 1,
- .resource = &v2m_ddc_i2c_resource,
-};
-
-static struct resource v2m_eth_resources[] = {
- {
- .start = V2M_LAN9118,
- .end = V2M_LAN9118 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_V2M_LAN9118,
- .end = IRQ_V2M_LAN9118,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct smsc911x_platform_config v2m_eth_config = {
- .flags = SMSC911X_USE_32BIT,
- .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_HIGH,
- .irq_type = SMSC911X_IRQ_TYPE_PUSH_PULL,
- .phy_interface = PHY_INTERFACE_MODE_MII,
-};
-
-static struct platform_device v2m_eth_device = {
- .name = "smsc911x",
- .id = -1,
- .resource = v2m_eth_resources,
- .num_resources = ARRAY_SIZE(v2m_eth_resources),
- .dev.platform_data = &v2m_eth_config,
-};
-
-static struct regulator_consumer_supply v2m_eth_supplies[] = {
- REGULATOR_SUPPLY("vddvario", "smsc911x"),
- REGULATOR_SUPPLY("vdd33a", "smsc911x"),
-};
-
-static struct resource v2m_usb_resources[] = {
- {
- .start = V2M_ISP1761,
- .end = V2M_ISP1761 + SZ_128K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = IRQ_V2M_ISP1761,
- .end = IRQ_V2M_ISP1761,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct isp1760_platform_data v2m_usb_config = {
- .is_isp1761 = true,
- .bus_width_16 = false,
- .port1_otg = true,
- .analog_oc = false,
- .dack_polarity_high = false,
- .dreq_polarity_high = false,
-};
-
-static struct platform_device v2m_usb_device = {
- .name = "isp1760",
- .id = -1,
- .resource = v2m_usb_resources,
- .num_resources = ARRAY_SIZE(v2m_usb_resources),
- .dev.platform_data = &v2m_usb_config,
-};
-
-static struct physmap_flash_data v2m_flash_data = {
- .width = 4,
-};
-
-static struct resource v2m_flash_resources[] = {
- {
- .start = V2M_NOR0,
- .end = V2M_NOR0 + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = V2M_NOR1,
- .end = V2M_NOR1 + SZ_64M - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device v2m_flash_device = {
- .name = "physmap-flash",
- .id = -1,
- .resource = v2m_flash_resources,
- .num_resources = ARRAY_SIZE(v2m_flash_resources),
- .dev.platform_data = &v2m_flash_data,
-};
-
-static struct pata_platform_info v2m_pata_data = {
- .ioport_shift = 2,
-};
-
-static struct resource v2m_pata_resources[] = {
- {
- .start = V2M_CF,
- .end = V2M_CF + 0xff,
- .flags = IORESOURCE_MEM,
- }, {
- .start = V2M_CF + 0x100,
- .end = V2M_CF + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device v2m_cf_device = {
- .name = "pata_platform",
- .id = -1,
- .resource = v2m_pata_resources,
- .num_resources = ARRAY_SIZE(v2m_pata_resources),
- .dev.platform_data = &v2m_pata_data,
-};
-
-static struct mmci_platform_data v2m_mmci_data = {
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .status = vexpress_get_mci_cardin,
- .gpio_cd = -1,
- .gpio_wp = -1,
-};
-
-static struct resource v2m_sysreg_resources[] = {
- {
- .start = V2M_SYSREGS,
- .end = V2M_SYSREGS + 0xfff,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device v2m_sysreg_device = {
- .name = "vexpress-sysreg",
- .id = -1,
- .resource = v2m_sysreg_resources,
- .num_resources = ARRAY_SIZE(v2m_sysreg_resources),
-};
-
-static struct platform_device v2m_muxfpga_device = {
- .name = "vexpress-muxfpga",
- .id = 0,
- .num_resources = 1,
- .resource = (struct resource []) {
- VEXPRESS_RES_FUNC(0, 7),
- }
-};
-
-static struct platform_device v2m_shutdown_device = {
- .name = "vexpress-shutdown",
- .id = 0,
- .num_resources = 1,
- .resource = (struct resource []) {
- VEXPRESS_RES_FUNC(0, 8),
- }
-};
-
-static struct platform_device v2m_reboot_device = {
- .name = "vexpress-reboot",
- .id = 0,
- .num_resources = 1,
- .resource = (struct resource []) {
- VEXPRESS_RES_FUNC(0, 9),
- }
-};
-
-static struct platform_device v2m_dvimode_device = {
- .name = "vexpress-dvimode",
- .id = 0,
- .num_resources = 1,
- .resource = (struct resource []) {
- VEXPRESS_RES_FUNC(0, 11),
- }
-};
-
-static AMBA_APB_DEVICE(aaci, "mb:aaci", 0, V2M_AACI, IRQ_V2M_AACI, NULL);
-static AMBA_APB_DEVICE(mmci, "mb:mmci", 0, V2M_MMCI, IRQ_V2M_MMCI, &v2m_mmci_data);
-static AMBA_APB_DEVICE(kmi0, "mb:kmi0", 0, V2M_KMI0, IRQ_V2M_KMI0, NULL);
-static AMBA_APB_DEVICE(kmi1, "mb:kmi1", 0, V2M_KMI1, IRQ_V2M_KMI1, NULL);
-static AMBA_APB_DEVICE(uart0, "mb:uart0", 0, V2M_UART0, IRQ_V2M_UART0, NULL);
-static AMBA_APB_DEVICE(uart1, "mb:uart1", 0, V2M_UART1, IRQ_V2M_UART1, NULL);
-static AMBA_APB_DEVICE(uart2, "mb:uart2", 0, V2M_UART2, IRQ_V2M_UART2, NULL);
-static AMBA_APB_DEVICE(uart3, "mb:uart3", 0, V2M_UART3, IRQ_V2M_UART3, NULL);
-static AMBA_APB_DEVICE(wdt, "mb:wdt", 0, V2M_WDT, IRQ_V2M_WDT, NULL);
-static AMBA_APB_DEVICE(rtc, "mb:rtc", 0, V2M_RTC, IRQ_V2M_RTC, NULL);
-
-static struct amba_device *v2m_amba_devs[] __initdata = {
- &aaci_device,
- &mmci_device,
- &kmi0_device,
- &kmi1_device,
- &uart0_device,
- &uart1_device,
- &uart2_device,
- &uart3_device,
- &wdt_device,
- &rtc_device,
-};
-
-static void __init v2m_timer_init(void)
-{
- vexpress_clk_init(ioremap(V2M_SYSCTL, SZ_4K));
- v2m_sp804_init(ioremap(V2M_TIMER01, SZ_4K), IRQ_V2M_TIMER0);
-}
-
-static void __init v2m_init_early(void)
-{
- if (ct_desc->init_early)
- ct_desc->init_early();
- versatile_sched_clock_init(vexpress_get_24mhz_clock_base(), 24000000);
-}
-
-struct ct_desc *ct_desc;
-
-static struct ct_desc *ct_descs[] __initdata = {
-#ifdef CONFIG_ARCH_VEXPRESS_CA9X4
- &ct_ca9x4_desc,
-#endif
-};
-
-static void __init v2m_populate_ct_desc(void)
-{
- int i;
- u32 current_tile_id;
-
- ct_desc = NULL;
- current_tile_id = vexpress_get_procid(VEXPRESS_SITE_MASTER)
- & V2M_CT_ID_MASK;
-
- for (i = 0; i < ARRAY_SIZE(ct_descs) && !ct_desc; ++i)
- if (ct_descs[i]->id == current_tile_id)
- ct_desc = ct_descs[i];
-
- if (!ct_desc)
- panic("vexpress: this kernel does not support core tile ID 0x%08x when booting via ATAGs.\n"
- "You may need a device tree blob or a different kernel to boot on this board.\n",
- current_tile_id);
-}
-
-static void __init v2m_map_io(void)
-{
- iotable_init(v2m_io_desc, ARRAY_SIZE(v2m_io_desc));
- vexpress_sysreg_early_init(ioremap(V2M_SYSREGS, SZ_4K));
- v2m_populate_ct_desc();
- ct_desc->map_io();
-}
-
-static void __init v2m_init_irq(void)
-{
- ct_desc->init_irq();
-}
-
-static void __init v2m_init(void)
-{
- int i;
-
- regulator_register_fixed(0, v2m_eth_supplies,
- ARRAY_SIZE(v2m_eth_supplies));
-
- platform_device_register(&v2m_sysreg_device);
- platform_device_register(&v2m_pcie_i2c_device);
- platform_device_register(&v2m_ddc_i2c_device);
- platform_device_register(&v2m_flash_device);
- platform_device_register(&v2m_cf_device);
- platform_device_register(&v2m_eth_device);
- platform_device_register(&v2m_usb_device);
-
- for (i = 0; i < ARRAY_SIZE(v2m_amba_devs); i++)
- amba_device_register(v2m_amba_devs[i], &iomem_resource);
-
- vexpress_syscfg_device_register(&v2m_muxfpga_device);
- vexpress_syscfg_device_register(&v2m_shutdown_device);
- vexpress_syscfg_device_register(&v2m_reboot_device);
- vexpress_syscfg_device_register(&v2m_dvimode_device);
-
- ct_desc->init_tile();
-}
-
-MACHINE_START(VEXPRESS, "ARM-Versatile Express")
- .atag_offset = 0x100,
- .smp = smp_ops(vexpress_smp_ops),
- .map_io = v2m_map_io,
- .init_early = v2m_init_early,
- .init_irq = v2m_init_irq,
- .init_time = v2m_timer_init,
- .init_machine = v2m_init,
-MACHINE_END
-
-static void __init v2m_dt_init(void)
-{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
-}
-
static const char * const v2m_dt_match[] __initconst = {
"arm,vexpress",
NULL,
.l2c_aux_mask = 0xfe0fffff,
.smp = smp_ops(vexpress_smp_dt_ops),
.smp_init = smp_init_ops(vexpress_smp_init_ops),
- .init_machine = v2m_dt_init,
MACHINE_END
# Common support
obj-y := common.o slcr.o pm.o
-CFLAGS_REMOVE_hotplug.o =-march=armv6k
-CFLAGS_hotplug.o =-Wa,-march=armv7-a -mcpu=cortex-a9
obj-$(CONFIG_SMP) += headsmp.o platsmp.o
extern u32 zynq_slcr_get_device_id(void);
#ifdef CONFIG_SMP
-extern void secondary_startup(void);
extern char zynq_secondary_trampoline;
extern char zynq_secondary_trampoline_jump;
extern char zynq_secondary_trampoline_end;
+++ /dev/null
-/*
- * Copyright (C) 2012-2013 Xilinx
- *
- * based on linux/arch/arm/mach-realview/hotplug.c
- *
- * Copyright (C) 2002 ARM Ltd.
- * All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <asm/proc-fns.h>
-
# ARM720T
config CPU_ARM720T
- bool "Support ARM720T processor" if ARCH_INTEGRATOR
+ bool "Support ARM720T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
select CPU_32v4T
select CPU_ABRT_LV4T
select CPU_CACHE_V4
# ARM740T
config CPU_ARM740T
- bool "Support ARM740T processor" if ARCH_INTEGRATOR
+ bool "Support ARM740T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
depends on !MMU
select CPU_32v4T
select CPU_ABRT_LV4T
# ARM920T
config CPU_ARM920T
- bool "Support ARM920T processor" if ARCH_INTEGRATOR
+ bool "Support ARM920T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
select CPU_32v4T
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
# ARM922T
config CPU_ARM922T
- bool "Support ARM922T processor" if ARCH_INTEGRATOR
+ bool "Support ARM922T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
select CPU_32v4T
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
# ARM926T
config CPU_ARM926T
- bool "Support ARM926T processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB
+ bool "Support ARM926T processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V5) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB)
select CPU_32v5
select CPU_ABRT_EV5TJ
select CPU_CACHE_VIVT
# ARM940T
config CPU_ARM940T
- bool "Support ARM940T processor" if ARCH_INTEGRATOR
+ bool "Support ARM940T processor" if (ARCH_MULTI_V4T && ARCH_INTEGRATOR)
depends on !MMU
select CPU_32v4T
select CPU_ABRT_NOMMU
# ARM946E-S
config CPU_ARM946E
- bool "Support ARM946E-S processor" if ARCH_INTEGRATOR
+ bool "Support ARM946E-S processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
depends on !MMU
select CPU_32v5
select CPU_ABRT_NOMMU
# ARM1020 - needs validating
config CPU_ARM1020
- bool "Support ARM1020T (rev 0) processor" if ARCH_INTEGRATOR
+ bool "Support ARM1020T (rev 0) processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
select CPU_32v5
select CPU_ABRT_EV4T
select CPU_CACHE_V4WT
# ARM1020E - needs validating
config CPU_ARM1020E
- bool "Support ARM1020E processor" if ARCH_INTEGRATOR
+ bool "Support ARM1020E processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
depends on n
select CPU_32v5
select CPU_ABRT_EV4T
# ARM1022E
config CPU_ARM1022
- bool "Support ARM1022E processor" if ARCH_INTEGRATOR
+ bool "Support ARM1022E processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
select CPU_32v5
select CPU_ABRT_EV4T
select CPU_CACHE_VIVT
# ARM1026EJ-S
config CPU_ARM1026
- bool "Support ARM1026EJ-S processor" if ARCH_INTEGRATOR
+ bool "Support ARM1026EJ-S processor" if (ARCH_MULTI_V5 && ARCH_INTEGRATOR)
select CPU_32v5
select CPU_ABRT_EV5T # But need Jazelle, but EV5TJ ignores bit 10
select CPU_CACHE_VIVT
# ARMv6
config CPU_V6
- bool "Support ARM V6 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
+ bool "Support ARM V6 processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V6) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX)
select CPU_32v6
select CPU_ABRT_EV6
select CPU_CACHE_V6
# ARMv6k
config CPU_V6K
- bool "Support ARM V6K processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
+ bool "Support ARM V6K processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V6) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX)
select CPU_32v6
select CPU_32v6K
select CPU_ABRT_EV6
# ARMv7
config CPU_V7
- bool "Support ARM V7 processor" if ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX
+ bool "Support ARM V7 processor" if (!ARCH_MULTIPLATFORM || ARCH_MULTI_V7) && (ARCH_INTEGRATOR || MACH_REALVIEW_EB || MACH_REALVIEW_PBX)
select CPU_32v6K
select CPU_32v7
select CPU_ABRT_EV7
config KUSER_HELPERS
bool "Enable kuser helpers in vector page" if !NEED_KUSER_HELPERS
+ depends on MMU
default y
help
Warning: disabling this option may break user programs.
* @associativity: variable to return the calculated associativity in
* @max_way_size: the maximum size in bytes for the cache ways
*/
-static void __init l2x0_cache_size_of_parse(const struct device_node *np,
+static int __init l2x0_cache_size_of_parse(const struct device_node *np,
u32 *aux_val, u32 *aux_mask,
u32 *associativity,
u32 max_way_size)
of_property_read_u32(np, "cache-line-size", &line_size);
if (!cache_size || !sets)
- return;
+ return -ENODEV;
/* All these l2 caches have the same line = block size actually */
if (!line_size) {
if (way_size > max_way_size) {
pr_err("L2C OF: set size %dKB is too large\n", way_size);
- return;
+ return -EINVAL;
}
pr_info("L2C OF: override cache size: %d bytes (%dKB)\n",
if (way_size_bits < 1 || way_size_bits > 6) {
pr_err("L2C OF: cache way size illegal: %dKB is not mapped\n",
way_size);
- return;
+ return -EINVAL;
}
mask |= L2C_AUX_CTRL_WAY_SIZE_MASK;
*aux_val &= ~mask;
*aux_val |= val;
*aux_mask &= ~mask;
+
+ return 0;
}
static void __init l2x0_of_parse(const struct device_node *np,
u32 dirty = 0;
u32 val = 0, mask = 0;
u32 assoc;
+ int ret;
of_property_read_u32(np, "arm,tag-latency", &tag);
if (tag) {
val |= (dirty - 1) << L2X0_AUX_CTRL_DIRTY_LATENCY_SHIFT;
}
- l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_256K);
+ ret = l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_256K);
+ if (ret)
+ return;
+
if (assoc > 8) {
pr_err("l2x0 of: cache setting yield too high associativity\n");
pr_err("l2x0 of: %d calculated, max 8\n", assoc);
u32 tag[3] = { 0, 0, 0 };
u32 filter[2] = { 0, 0 };
u32 assoc;
+ int ret;
of_property_read_u32_array(np, "arm,tag-latency", tag, ARRAY_SIZE(tag));
if (tag[0] && tag[1] && tag[2])
l2x0_base + L310_ADDR_FILTER_START);
}
- l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_512K);
+ ret = l2x0_cache_size_of_parse(np, aux_val, aux_mask, &assoc, SZ_512K);
+ if (ret)
+ return;
+
switch (assoc) {
case 16:
*aux_val &= ~L2X0_AUX_CTRL_ASSOC_MASK;
*aux_mask &= ~L2X0_AUX_CTRL_ASSOC_MASK;
break;
default:
- pr_err("PL310 OF: cache setting yield illegal associativity\n");
- pr_err("PL310 OF: %d calculated, only 8 and 16 legal\n", assoc);
+ pr_err("L2C-310 OF cache associativity %d invalid, only 8 or 16 permitted\n",
+ assoc);
break;
}
}
{
return dma_common_pages_remap(pages, size,
VM_ARM_DMA_CONSISTENT | VM_USERMAP, prot, caller);
- return NULL;
}
/*
{
unsigned long vaddr;
int idx, type;
+ struct page *page = pfn_to_page(pfn);
pagefault_disable();
+ if (!PageHighMem(page))
+ return page_address(page);
type = kmap_atomic_idx_push();
idx = type + KM_TYPE_NR * smp_processor_id();
#ifdef CONFIG_MODULES
" modules : 0x%08lx - 0x%08lx (%4ld MB)\n"
#endif
- " .text : 0x%p" " - 0x%p" " (%4d kB)\n"
- " .init : 0x%p" " - 0x%p" " (%4d kB)\n"
- " .data : 0x%p" " - 0x%p" " (%4d kB)\n"
- " .bss : 0x%p" " - 0x%p" " (%4d kB)\n",
+ " .text : 0x%p" " - 0x%p" " (%4td kB)\n"
+ " .init : 0x%p" " - 0x%p" " (%4td kB)\n"
+ " .data : 0x%p" " - 0x%p" " (%4td kB)\n"
+ " .bss : 0x%p" " - 0x%p" " (%4td kB)\n",
MLK(UL(CONFIG_VECTORS_BASE), UL(CONFIG_VECTORS_BASE) +
(PAGE_SIZE)),
/* Auxiliary Debug Modes Control 1 Register */
#define PJ4B_STATIC_BP (1 << 2) /* Enable Static BP */
#define PJ4B_INTER_PARITY (1 << 8) /* Disable Internal Parity Handling */
-#define PJ4B_BCK_OFF_STREX (1 << 5) /* Enable the back off of STREX instr */
#define PJ4B_CLEAN_LINE (1 << 16) /* Disable data transfer for clean line */
/* Auxiliary Debug Modes Control 2 Register */
/* Auxiliary Debug Modes Control 1 Register */
mrc p15, 1, r0, c15, c1, 1
orr r0, r0, #PJ4B_CLEAN_LINE
- orr r0, r0, #PJ4B_BCK_OFF_STREX
orr r0, r0, #PJ4B_INTER_PARITY
bic r0, r0, #PJ4B_STATIC_BP
mcr p15, 1, r0, c15, c1, 1
mrc p15, 0, r5, c15, c1, 0 @ CP access reg
mrc p15, 0, r6, c13, c0, 0 @ PID
mrc p15, 0, r7, c3, c0, 0 @ domain ID
- mrc p15, 0, r8, c1, c1, 0 @ auxiliary control reg
+ mrc p15, 0, r8, c1, c0, 1 @ auxiliary control reg
mrc p15, 0, r9, c1, c0, 0 @ control reg
bic r4, r4, #2 @ clear frequency change bit
stmia r0, {r4 - r9} @ store cp regs
mcr p15, 0, r6, c13, c0, 0 @ PID
mcr p15, 0, r7, c3, c0, 0 @ domain ID
mcr p15, 0, r1, c2, c0, 0 @ translation table base addr
- mcr p15, 0, r8, c1, c1, 0 @ auxiliary control reg
+ mcr p15, 0, r8, c1, c0, 1 @ auxiliary control reg
mov r0, r9 @ control register
b cpu_resume_mmu
ENDPROC(cpu_xscale_do_resume)
# PM support
obj-$(CONFIG_PM_SLEEP) += pm-common.o
+obj-$(CONFIG_EXYNOS_CPU_SUSPEND) += pm-common.o
obj-$(CONFIG_SAMSUNG_PM) += pm.o
obj-$(CONFIG_SAMSUNG_PM_GPIO) += pm-gpio.o
obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o
#define S5P_VA_CHIPID S3C_ADDR(0x02000000)
#define S5P_VA_CMU S3C_ADDR(0x02100000)
-#define S5P_VA_GPIO S3C_ADDR(0x02200000)
-#define S5P_VA_GPIO1 S5P_VA_GPIO
-#define S5P_VA_GPIO2 S3C_ADDR(0x02240000)
-#define S5P_VA_GPIO3 S3C_ADDR(0x02280000)
-#define S5P_VA_SYSRAM S3C_ADDR(0x02400000)
-#define S5P_VA_SYSRAM_NS S3C_ADDR(0x02410000)
#define S5P_VA_DMC0 S3C_ADDR(0x02440000)
#define S5P_VA_DMC1 S3C_ADDR(0x02480000)
#define S5P_VA_SROMC S3C_ADDR(0x024C0000)
-#define S5P_VA_SYSTIMER S3C_ADDR(0x02500000)
-#define S5P_VA_L2CC S3C_ADDR(0x02600000)
-
-#define S5P_VA_COMBINER_BASE S3C_ADDR(0x02700000)
-#define S5P_VA_COMBINER(x) (S5P_VA_COMBINER_BASE + ((x) >> 2) * 0x10)
-
#define S5P_VA_COREPERI_BASE S3C_ADDR(0x02800000)
#define S5P_VA_COREPERI(x) (S5P_VA_COREPERI_BASE + (x))
#define S5P_VA_SCU S5P_VA_COREPERI(0x0)
#define S5P_VA_TWD S5P_VA_COREPERI(0x600)
-#define S5P_VA_GIC_CPU S3C_ADDR(0x02810000)
-#define S5P_VA_GIC_DIST S3C_ADDR(0x02820000)
-
#define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000))
#define VA_VIC0 VA_VIC(0)
#define VA_VIC1 VA_VIC(1)
#define VA_VIC2 VA_VIC(2)
#define VA_VIC3 VA_VIC(3)
-#define S5P_VA_UART(x) (S3C_VA_UART + ((x) * S3C_UART_OFFSET))
-#define S5P_VA_UART0 S5P_VA_UART(0)
-#define S5P_VA_UART1 S5P_VA_UART(1)
-#define S5P_VA_UART2 S5P_VA_UART(2)
-#define S5P_VA_UART3 S5P_VA_UART(3)
-
#ifndef S3C_UART_OFFSET
#define S3C_UART_OFFSET (0x400)
#endif
bool
config PLAT_VERSATILE_SCHED_CLOCK
- def_bool y
+ bool
endif
config ARM64
def_bool y
+ select ARCH_BINFMT_ELF_RANDOMIZE_PIE
select ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE
select ARCH_HAS_SG_CHAIN
select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
select GENERIC_CPU_AUTOPROBE
select GENERIC_EARLY_IOREMAP
- select GENERIC_IOMAP
select GENERIC_IRQ_PROBE
select GENERIC_IRQ_SHOW
+ select GENERIC_PCI_IOMAP
select GENERIC_SCHED_CLOCK
select GENERIC_SMP_IDLE_THREAD
select GENERIC_STRNCPY_FROM_USER
select GENERIC_TIME_VSYSCALL
select HANDLE_DOMAIN_IRQ
select HARDIRQS_SW_RESEND
+ select HAVE_ALIGNED_STRUCT_PAGE if SLUB
select HAVE_ARCH_AUDITSYSCALL
select HAVE_ARCH_JUMP_LABEL
select HAVE_ARCH_KGDB
+ select HAVE_ARCH_SECCOMP_FILTER
select HAVE_ARCH_TRACEHOOK
select HAVE_BPF_JIT
select HAVE_C_RECORDMCOUNT
select HAVE_CC_STACKPROTECTOR
+ select HAVE_CMPXCHG_DOUBLE
select HAVE_DEBUG_BUGVERBOSE
select HAVE_DEBUG_KMEMLEAK
select HAVE_DMA_API_DEBUG
menu "Platform selection"
+config ARCH_SEATTLE
+ bool "AMD Seattle SoC Family"
+ help
+ This enables support for AMD Seattle SOC Family
+
config ARCH_THUNDER
bool "Cavium Inc. Thunder SoC Family"
help
menu "Bus support"
-config ARM_AMBA
- bool
-
config PCI
bool "PCI support"
help
menu "Kernel Features"
+menu "ARM errata workarounds via the alternatives framework"
+
+config ARM64_ERRATUM_826319
+ bool "Cortex-A53: 826319: System might deadlock if a write cannot complete until read data is accepted"
+ default y
+ help
+ This option adds an alternative code sequence to work around ARM
+ erratum 826319 on Cortex-A53 parts up to r0p2 with an AMBA 4 ACE or
+ AXI master interface and an L2 cache.
+
+ If a Cortex-A53 uses an AMBA AXI4 ACE interface to other processors
+ and is unable to accept a certain write via this interface, it will
+ not progress on read data presented on the read data channel and the
+ system can deadlock.
+
+ The workaround promotes data cache clean instructions to
+ data cache clean-and-invalidate.
+ Please note that this does not necessarily enable the workaround,
+ as it depends on the alternative framework, which will only patch
+ the kernel if an affected CPU is detected.
+
+ If unsure, say Y.
+
+config ARM64_ERRATUM_827319
+ bool "Cortex-A53: 827319: Data cache clean instructions might cause overlapping transactions to the interconnect"
+ default y
+ help
+ This option adds an alternative code sequence to work around ARM
+ erratum 827319 on Cortex-A53 parts up to r0p2 with an AMBA 5 CHI
+ master interface and an L2 cache.
+
+ Under certain conditions this erratum can cause a clean line eviction
+ to occur at the same time as another transaction to the same address
+ on the AMBA 5 CHI interface, which can cause data corruption if the
+ interconnect reorders the two transactions.
+
+ The workaround promotes data cache clean instructions to
+ data cache clean-and-invalidate.
+ Please note that this does not necessarily enable the workaround,
+ as it depends on the alternative framework, which will only patch
+ the kernel if an affected CPU is detected.
+
+ If unsure, say Y.
+
+config ARM64_ERRATUM_824069
+ bool "Cortex-A53: 824069: Cache line might not be marked as clean after a CleanShared snoop"
+ default y
+ help
+ This option adds an alternative code sequence to work around ARM
+ erratum 824069 on Cortex-A53 parts up to r0p2 when it is connected
+ to a coherent interconnect.
+
+ If a Cortex-A53 processor is executing a store or prefetch for
+ write instruction at the same time as a processor in another
+ cluster is executing a cache maintenance operation to the same
+ address, then this erratum might cause a clean cache line to be
+ incorrectly marked as dirty.
+
+ The workaround promotes data cache clean instructions to
+ data cache clean-and-invalidate.
+ Please note that this option does not necessarily enable the
+ workaround, as it depends on the alternative framework, which will
+ only patch the kernel if an affected CPU is detected.
+
+ If unsure, say Y.
+
+config ARM64_ERRATUM_819472
+ bool "Cortex-A53: 819472: Store exclusive instructions might cause data corruption"
+ default y
+ help
+ This option adds an alternative code sequence to work around ARM
+ erratum 819472 on Cortex-A53 parts up to r0p1 with an L2 cache
+ present when it is connected to a coherent interconnect.
+
+ If the processor is executing a load and store exclusive sequence at
+ the same time as a processor in another cluster is executing a cache
+ maintenance operation to the same address, then this erratum might
+ cause data corruption.
+
+ The workaround promotes data cache clean instructions to
+ data cache clean-and-invalidate.
+ Please note that this does not necessarily enable the workaround,
+ as it depends on the alternative framework, which will only patch
+ the kernel if an affected CPU is detected.
+
+ If unsure, say Y.
+
+config ARM64_ERRATUM_832075
+ bool "Cortex-A57: 832075: possible deadlock on mixing exclusive memory accesses with device loads"
+ default y
+ help
+ This option adds an alternative code sequence to work around ARM
+ erratum 832075 on Cortex-A57 parts up to r1p2.
+
+ Affected Cortex-A57 parts might deadlock when exclusive load/store
+ instructions to Write-Back memory are mixed with Device loads.
+
+ The workaround is to promote device loads to use Load-Acquire
+ semantics.
+ Please note that this does not necessarily enable the workaround,
+ as it depends on the alternative framework, which will only patch
+ the kernel if an affected CPU is detected.
+
+ If unsure, say Y.
+
+endmenu
+
+
choice
prompt "Page size"
default ARM64_4K_PAGES
config ARM64_VA_BITS_48
bool "48-bit"
- depends on BROKEN
+ depends on !ARM_SMMU
endchoice
source "mm/Kconfig"
+config SECCOMP
+ bool "Enable seccomp to safely compute untrusted bytecode"
+ ---help---
+ This kernel feature is useful for number crunching applications
+ that may need to compute untrusted bytecode during their
+ execution. By using pipes or other transports made available to
+ the process as file descriptors supporting the read/write
+ syscalls, it's possible to isolate those applications in
+ their own address space using seccomp. Once seccomp is
+ enabled via prctl(PR_SET_SECCOMP), it cannot be disabled
+ and the task is only allowed to execute a few safe syscalls
+ defined by each seccomp mode.
+
config XEN_DOM0
def_bool y
depends on XEN
default "14" if (ARM64_64K_PAGES && TRANSPARENT_HUGEPAGE)
default "11"
+menuconfig ARMV8_DEPRECATED
+ bool "Emulate deprecated/obsolete ARMv8 instructions"
+ depends on COMPAT
+ help
+ Legacy software support may require certain instructions
+ that have been deprecated or obsoleted in the architecture.
+
+ Enable this config to enable selective emulation of these
+ features.
+
+ If unsure, say Y
+
+if ARMV8_DEPRECATED
+
+config SWP_EMULATION
+ bool "Emulate SWP/SWPB instructions"
+ help
+ ARMv8 obsoletes the use of A32 SWP/SWPB instructions such that
+ they are always undefined. Say Y here to enable software
+ emulation of these instructions for userspace using LDXR/STXR.
+
+ In some older versions of glibc [<=2.8] SWP is used during futex
+ trylock() operations with the assumption that the code will not
+ be preempted. This invalid assumption may be more likely to fail
+ with SWP emulation enabled, leading to deadlock of the user
+ application.
+
+ NOTE: when accessing uncached shared regions, LDXR/STXR rely
+ on an external transaction monitoring block called a global
+ monitor to maintain update atomicity. If your system does not
+ implement a global monitor, this option can cause programs that
+ perform SWP operations to uncached memory to deadlock.
+
+ If unsure, say Y
+
+config CP15_BARRIER_EMULATION
+ bool "Emulate CP15 Barrier instructions"
+ help
+ The CP15 barrier instructions - CP15ISB, CP15DSB, and
+ CP15DMB - are deprecated in ARMv8 (and ARMv7). It is
+ strongly recommended to use the ISB, DSB, and DMB
+ instructions instead.
+
+ Say Y here to enable software emulation of these
+ instructions for AArch32 userspace code. When this option is
+ enabled, CP15 barrier usage is traced which can help
+ identify software that needs updating.
+
+ If unsure, say Y
+
+endif
+
endmenu
menu "Boot options"
allow the kernel to be booted as an EFI application. This
is only useful on systems that have UEFI firmware.
+config DMI
+ bool "Enable support for SMBIOS (DMI) tables"
+ depends on EFI
+ default y
+ help
+ This enables SMBIOS/DMI feature for systems.
+
+ This option is only useful on systems that have UEFI firmware.
+ However, even with this option, the resultant kernel should
+ continue to boot on existing non-UEFI platforms.
+
endmenu
menu "Userspace binary formats"
bool
default y
+config ARM64_PTDUMP
+ bool "Export kernel pagetable layout to userspace via debugfs"
+ depends on DEBUG_KERNEL
+ select DEBUG_FS
+ help
+ Say Y here if you want to show the kernel pagetable layout in a
+ debugfs file. This information is only useful for kernel developers
+ who are working in architecture specific areas of the kernel.
+ It is probably not a good idea to enable this feature in a production
+ kernel.
+ If in doubt, say "N"
+
config STRICT_DEVMEM
bool "Filter access to /dev/mem"
depends on MMU
%.dtb: scripts
$(Q)$(MAKE) $(build)=$(boot)/dts $(boot)/dts/$@
-dtbs: scripts
- $(Q)$(MAKE) $(build)=$(boot)/dts dtbs
+PHONY += dtbs dtbs_install
+
+dtbs: prepare scripts
+ $(Q)$(MAKE) $(build)=$(boot)/dts
+
+dtbs_install:
+ $(Q)$(MAKE) $(dtbinst)=$(boot)/dts
PHONY += vdso_install
vdso_install:
echo '* Image.gz - Compressed kernel image (arch/$(ARCH)/boot/Image.gz)'
echo ' Image - Uncompressed kernel image (arch/$(ARCH)/boot/Image)'
echo '* dtbs - Build device tree blobs for enabled boards'
+ echo ' dtbs_install - Install dtbs to $(INSTALL_DTBS_PATH)'
echo ' install - Install uncompressed kernel'
echo ' zinstall - Install compressed kernel'
echo ' Install using (your) ~/bin/installkernel or'
-dtb-$(CONFIG_ARCH_THUNDER) += thunder-88xx.dtb
-dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb foundation-v8.dtb
-dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb
+dts-dirs += amd
+dts-dirs += apm
+dts-dirs += arm
+dts-dirs += cavium
-targets += dtbs
-targets += $(dtb-y)
-
-dtbs: $(addprefix $(obj)/, $(dtb-y))
-
-clean-files := *.dtb
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
--- /dev/null
+dtb-$(CONFIG_ARCH_SEATTLE) += amd-overdrive.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
--- /dev/null
+/*
+ * DTS file for AMD Seattle Overdrive Development Board
+ *
+ * Copyright (C) 2014 Advanced Micro Devices, Inc.
+ */
+
+/dts-v1/;
+
+/include/ "amd-seattle-soc.dtsi"
+
+/ {
+ model = "AMD Seattle Development Board (Overdrive)";
+ compatible = "amd,seattle-overdrive", "amd,seattle";
+
+ chosen {
+ stdout-path = &serial0;
+ linux,pci-probe-only;
+ };
+};
+
+&ccp0 {
+ status = "ok";
+};
+
+&gpio0 {
+ status = "ok";
+};
+
+&gpio1 {
+ status = "ok";
+};
+
+&i2c0 {
+ status = "ok";
+};
+
+&pcie0 {
+ status = "ok";
+};
+
+&spi0 {
+ status = "ok";
+};
+
+&spi1 {
+ status = "ok";
+ sdcard0: sdcard@0 {
+ compatible = "mmc-spi-slot";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ voltage-ranges = <3200 3400>;
+ gpios = <&gpio0 7 0>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <7 3>;
+ pl022,hierarchy = <0>;
+ pl022,interface = <0>;
+ pl022,com-mode = <0x0>;
+ pl022,rx-level-trig = <0>;
+ pl022,tx-level-trig = <0>;
+ };
+};
+
+&v2m0 {
+ arm,msi-base-spi = <64>;
+ arm,msi-num-spis = <256>;
+};
--- /dev/null
+/*
+ * DTS file for AMD Seattle Clocks
+ *
+ * Copyright (C) 2014 Advanced Micro Devices, Inc.
+ */
+
+ adl3clk_100mhz: clk100mhz_0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "adl3clk_100mhz";
+ };
+
+ ccpclk_375mhz: clk375mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <375000000>;
+ clock-output-names = "ccpclk_375mhz";
+ };
+
+ sataclk_333mhz: clk333mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <333000000>;
+ clock-output-names = "sataclk_333mhz";
+ };
+
+ pcieclk_500mhz: clk500mhz_0 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <500000000>;
+ clock-output-names = "pcieclk_500mhz";
+ };
+
+ dmaclk_500mhz: clk500mhz_1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <500000000>;
+ clock-output-names = "dmaclk_500mhz";
+ };
+
+ miscclk_250mhz: clk250mhz_4 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <250000000>;
+ clock-output-names = "miscclk_250mhz";
+ };
+
+ uartspiclk_100mhz: clk100mhz_1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "uartspiclk_100mhz";
+ };
--- /dev/null
+/*
+ * DTS file for AMD Seattle SoC
+ *
+ * Copyright (C) 2014 Advanced Micro Devices, Inc.
+ */
+
+/ {
+ compatible = "amd,seattle";
+ interrupt-parent = <&gic0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ gic0: interrupt-controller@e1101000 {
+ compatible = "arm,gic-400", "arm,cortex-a15-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+ reg = <0x0 0xe1110000 0 0x1000>,
+ <0x0 0xe112f000 0 0x2000>,
+ <0x0 0xe1140000 0 0x10000>,
+ <0x0 0xe1160000 0 0x10000>;
+ interrupts = <1 9 0xf04>;
+ ranges = <0 0 0 0xe1100000 0 0x100000>;
+ v2m0: v2m@e0080000 {
+ compatible = "arm,gic-v2m-frame";
+ msi-controller;
+ reg = <0x0 0x00080000 0 0x1000>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 0xff04>,
+ <1 14 0xff04>,
+ <1 11 0xff04>,
+ <1 10 0xff04>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <0 7 4>,
+ <0 8 4>,
+ <0 9 4>,
+ <0 10 4>,
+ <0 11 4>,
+ <0 12 4>,
+ <0 13 4>,
+ <0 14 4>;
+ };
+
+ smb0: smb {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* DDR range is 40-bit addressing */
+ dma-ranges = <0x80 0x0 0x80 0x0 0x7f 0xffffffff>;
+
+ /include/ "amd-seattle-clks.dtsi"
+
+ sata0: sata@e0300000 {
+ compatible = "snps,dwc-ahci";
+ reg = <0 0xe0300000 0 0x800>;
+ interrupts = <0 355 4>;
+ clocks = <&sataclk_333mhz>;
+ dma-coherent;
+ };
+
+ i2c0: i2c@e1000000 {
+ status = "disabled";
+ compatible = "snps,designware-i2c";
+ reg = <0 0xe1000000 0 0x1000>;
+ interrupts = <0 357 4>;
+ clocks = <&uartspiclk_100mhz>;
+ };
+
+ serial0: serial@e1010000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0 0xe1010000 0 0x1000>;
+ interrupts = <0 328 4>;
+ clocks = <&uartspiclk_100mhz>, <&uartspiclk_100mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ spi0: ssp@e1020000 {
+ status = "disabled";
+ compatible = "arm,pl022", "arm,primecell";
+ #gpio-cells = <2>;
+ reg = <0 0xe1020000 0 0x1000>;
+ spi-controller;
+ interrupts = <0 330 4>;
+ clocks = <&uartspiclk_100mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ spi1: ssp@e1030000 {
+ status = "disabled";
+ compatible = "arm,pl022", "arm,primecell";
+ #gpio-cells = <2>;
+ reg = <0 0xe1030000 0 0x1000>;
+ spi-controller;
+ interrupts = <0 329 4>;
+ clocks = <&uartspiclk_100mhz>;
+ clock-names = "apb_pclk";
+ num-cs = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+
+ gpio0: gpio@e1040000 {
+ status = "disabled";
+ compatible = "arm,pl061", "arm,primecell";
+ #gpio-cells = <2>;
+ reg = <0 0xe1040000 0 0x1000>;
+ gpio-controller;
+ interrupts = <0 359 4>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&uartspiclk_100mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ gpio1: gpio@e1050000 {
+ status = "disabled";
+ compatible = "arm,pl061", "arm,primecell";
+ #gpio-cells = <2>;
+ reg = <0 0xe1050000 0 0x1000>;
+ gpio-controller;
+ interrupts = <0 358 4>;
+ clocks = <&uartspiclk_100mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ ccp0: ccp@e0100000 {
+ status = "disabled";
+ compatible = "amd,ccp-seattle-v1a";
+ reg = <0 0xe0100000 0 0x10000>;
+ interrupts = <0 3 4>;
+ dma-coherent;
+ };
+
+ pcie0: pcie@f0000000 {
+ compatible = "pci-host-ecam-generic";
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ bus-range = <0 0x7f>;
+ msi-parent = <&v2m0>;
+ reg = <0 0xf0000000 0 0x10000000>;
+
+ interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+ interrupt-map =
+ <0x1000 0x0 0x0 0x1 &gic0 0x0 0x0 0x0 0x120 0x1>,
+ <0x1000 0x0 0x0 0x2 &gic0 0x0 0x0 0x0 0x121 0x1>,
+ <0x1000 0x0 0x0 0x3 &gic0 0x0 0x0 0x0 0x122 0x1>,
+ <0x1000 0x0 0x0 0x4 &gic0 0x0 0x0 0x0 0x123 0x1>;
+
+ dma-coherent;
+ dma-ranges = <0x43000000 0x80 0x0 0x80 0x0 0x7f 0xffffffff>;
+ ranges =
+ /* I/O Memory (size=64K) */
+ <0x01000000 0x00 0x00000000 0x00 0xefff0000 0x00 0x00010000>,
+ /* 32-bit MMIO (size=2G) */
+ <0x02000000 0x00 0x40000000 0x00 0x40000000 0x00 0x80000000>,
+ /* 64-bit MMIO (size= 124G) */
+ <0x03000000 0x01 0x00000000 0x01 0x00000000 0x7f 0x00000000>;
+ };
+ };
+};
+++ /dev/null
-/*
- * dts file for AppliedMicro (APM) Mustang Board
- *
- * Copyright (C) 2013, Applied Micro Circuits Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-/dts-v1/;
-
-/include/ "apm-storm.dtsi"
-
-/ {
- model = "APM X-Gene Mustang board";
- compatible = "apm,mustang", "apm,xgene-storm";
-
- chosen { };
-
- memory {
- device_type = "memory";
- reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */
- };
-};
-
-&pcie0clk {
- status = "ok";
-};
-
-&pcie0 {
- status = "ok";
-};
-
-&serial0 {
- status = "ok";
-};
-
-&menet {
- status = "ok";
-};
-
-&sgenet0 {
- status = "ok";
-};
-
-&xgenet {
- status = "ok";
-};
+++ /dev/null
-/*
- * dts file for AppliedMicro (APM) X-Gene Storm SOC
- *
- * Copyright (C) 2013, Applied Micro Circuits Corporation
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- */
-
-/ {
- compatible = "apm,xgene-storm";
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- cpu@000 {
- device_type = "cpu";
- compatible = "apm,potenza", "arm,armv8";
- reg = <0x0 0x000>;
- enable-method = "spin-table";
- cpu-release-addr = <0x1 0x0000fff8>;
- };
- cpu@001 {
- device_type = "cpu";
- compatible = "apm,potenza", "arm,armv8";
- reg = <0x0 0x001>;
- enable-method = "spin-table";
- cpu-release-addr = <0x1 0x0000fff8>;
- };
- cpu@100 {
- device_type = "cpu";
- compatible = "apm,potenza", "arm,armv8";
- reg = <0x0 0x100>;
- enable-method = "spin-table";
- cpu-release-addr = <0x1 0x0000fff8>;
- };
- cpu@101 {
- device_type = "cpu";
- compatible = "apm,potenza", "arm,armv8";
- reg = <0x0 0x101>;
- enable-method = "spin-table";
- cpu-release-addr = <0x1 0x0000fff8>;
- };
- cpu@200 {
- device_type = "cpu";
- compatible = "apm,potenza", "arm,armv8";
- reg = <0x0 0x200>;
- enable-method = "spin-table";
- cpu-release-addr = <0x1 0x0000fff8>;
- };
- cpu@201 {
- device_type = "cpu";
- compatible = "apm,potenza", "arm,armv8";
- reg = <0x0 0x201>;
- enable-method = "spin-table";
- cpu-release-addr = <0x1 0x0000fff8>;
- };
- cpu@300 {
- device_type = "cpu";
- compatible = "apm,potenza", "arm,armv8";
- reg = <0x0 0x300>;
- enable-method = "spin-table";
- cpu-release-addr = <0x1 0x0000fff8>;
- };
- cpu@301 {
- device_type = "cpu";
- compatible = "apm,potenza", "arm,armv8";
- reg = <0x0 0x301>;
- enable-method = "spin-table";
- cpu-release-addr = <0x1 0x0000fff8>;
- };
- };
-
- gic: interrupt-controller@78010000 {
- compatible = "arm,cortex-a15-gic";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x0 0x78010000 0x0 0x1000>, /* GIC Dist */
- <0x0 0x78020000 0x0 0x1000>, /* GIC CPU */
- <0x0 0x78040000 0x0 0x2000>, /* GIC VCPU Control */
- <0x0 0x78060000 0x0 0x2000>; /* GIC VCPU */
- interrupts = <1 9 0xf04>; /* GIC Maintenence IRQ */
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <1 0 0xff01>, /* Secure Phys IRQ */
- <1 13 0xff01>, /* Non-secure Phys IRQ */
- <1 14 0xff01>, /* Virt IRQ */
- <1 15 0xff01>; /* Hyp IRQ */
- clock-frequency = <50000000>;
- };
-
- soc {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- clocks {
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
- refclk: refclk {
- compatible = "fixed-clock";
- #clock-cells = <1>;
- clock-frequency = <100000000>;
- clock-output-names = "refclk";
- };
-
- pcppll: pcppll@17000100 {
- compatible = "apm,xgene-pcppll-clock";
- #clock-cells = <1>;
- clocks = <&refclk 0>;
- clock-names = "pcppll";
- reg = <0x0 0x17000100 0x0 0x1000>;
- clock-output-names = "pcppll";
- type = <0>;
- };
-
- socpll: socpll@17000120 {
- compatible = "apm,xgene-socpll-clock";
- #clock-cells = <1>;
- clocks = <&refclk 0>;
- clock-names = "socpll";
- reg = <0x0 0x17000120 0x0 0x1000>;
- clock-output-names = "socpll";
- type = <1>;
- };
-
- socplldiv2: socplldiv2 {
- compatible = "fixed-factor-clock";
- #clock-cells = <1>;
- clocks = <&socpll 0>;
- clock-names = "socplldiv2";
- clock-mult = <1>;
- clock-div = <2>;
- clock-output-names = "socplldiv2";
- };
-
- qmlclk: qmlclk {
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- clock-names = "qmlclk";
- reg = <0x0 0x1703C000 0x0 0x1000>;
- reg-names = "csr-reg";
- clock-output-names = "qmlclk";
- };
-
- ethclk: ethclk {
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- clock-names = "ethclk";
- reg = <0x0 0x17000000 0x0 0x1000>;
- reg-names = "div-reg";
- divider-offset = <0x238>;
- divider-width = <0x9>;
- divider-shift = <0x0>;
- clock-output-names = "ethclk";
- };
-
- menetclk: menetclk {
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <ðclk 0>;
- reg = <0x0 0x1702C000 0x0 0x1000>;
- reg-names = "csr-reg";
- clock-output-names = "menetclk";
- };
-
- sge0clk: sge0clk@1f21c000 {
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- reg = <0x0 0x1f21c000 0x0 0x1000>;
- reg-names = "csr-reg";
- csr-mask = <0x3>;
- clock-output-names = "sge0clk";
- };
-
- xge0clk: xge0clk@1f61c000 {
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- reg = <0x0 0x1f61c000 0x0 0x1000>;
- reg-names = "csr-reg";
- csr-mask = <0x3>;
- clock-output-names = "xge0clk";
- };
-
- sataphy1clk: sataphy1clk@1f21c000 {
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- reg = <0x0 0x1f21c000 0x0 0x1000>;
- reg-names = "csr-reg";
- clock-output-names = "sataphy1clk";
- status = "disabled";
- csr-offset = <0x4>;
- csr-mask = <0x00>;
- enable-offset = <0x0>;
- enable-mask = <0x06>;
- };
-
- sataphy2clk: sataphy1clk@1f22c000 {
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- reg = <0x0 0x1f22c000 0x0 0x1000>;
- reg-names = "csr-reg";
- clock-output-names = "sataphy2clk";
- status = "ok";
- csr-offset = <0x4>;
- csr-mask = <0x3a>;
- enable-offset = <0x0>;
- enable-mask = <0x06>;
- };
-
- sataphy3clk: sataphy1clk@1f23c000 {
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- reg = <0x0 0x1f23c000 0x0 0x1000>;
- reg-names = "csr-reg";
- clock-output-names = "sataphy3clk";
- status = "ok";
- csr-offset = <0x4>;
- csr-mask = <0x3a>;
- enable-offset = <0x0>;
- enable-mask = <0x06>;
- };
-
- sata01clk: sata01clk@1f21c000 {
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- reg = <0x0 0x1f21c000 0x0 0x1000>;
- reg-names = "csr-reg";
- clock-output-names = "sata01clk";
- csr-offset = <0x4>;
- csr-mask = <0x05>;
- enable-offset = <0x0>;
- enable-mask = <0x39>;
- };
-
- sata23clk: sata23clk@1f22c000 {
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- reg = <0x0 0x1f22c000 0x0 0x1000>;
- reg-names = "csr-reg";
- clock-output-names = "sata23clk";
- csr-offset = <0x4>;
- csr-mask = <0x05>;
- enable-offset = <0x0>;
- enable-mask = <0x39>;
- };
-
- sata45clk: sata45clk@1f23c000 {
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- reg = <0x0 0x1f23c000 0x0 0x1000>;
- reg-names = "csr-reg";
- clock-output-names = "sata45clk";
- csr-offset = <0x4>;
- csr-mask = <0x05>;
- enable-offset = <0x0>;
- enable-mask = <0x39>;
- };
-
- rtcclk: rtcclk@17000000 {
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- reg = <0x0 0x17000000 0x0 0x2000>;
- reg-names = "csr-reg";
- csr-offset = <0xc>;
- csr-mask = <0x2>;
- enable-offset = <0x10>;
- enable-mask = <0x2>;
- clock-output-names = "rtcclk";
- };
-
- rngpkaclk: rngpkaclk@17000000 {
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- reg = <0x0 0x17000000 0x0 0x2000>;
- reg-names = "csr-reg";
- csr-offset = <0xc>;
- csr-mask = <0x10>;
- enable-offset = <0x10>;
- enable-mask = <0x10>;
- clock-output-names = "rngpkaclk";
- };
-
- pcie0clk: pcie0clk@1f2bc000 {
- status = "disabled";
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- reg = <0x0 0x1f2bc000 0x0 0x1000>;
- reg-names = "csr-reg";
- clock-output-names = "pcie0clk";
- };
-
- pcie1clk: pcie1clk@1f2cc000 {
- status = "disabled";
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- reg = <0x0 0x1f2cc000 0x0 0x1000>;
- reg-names = "csr-reg";
- clock-output-names = "pcie1clk";
- };
-
- pcie2clk: pcie2clk@1f2dc000 {
- status = "disabled";
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- reg = <0x0 0x1f2dc000 0x0 0x1000>;
- reg-names = "csr-reg";
- clock-output-names = "pcie2clk";
- };
-
- pcie3clk: pcie3clk@1f50c000 {
- status = "disabled";
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- reg = <0x0 0x1f50c000 0x0 0x1000>;
- reg-names = "csr-reg";
- clock-output-names = "pcie3clk";
- };
-
- pcie4clk: pcie4clk@1f51c000 {
- status = "disabled";
- compatible = "apm,xgene-device-clock";
- #clock-cells = <1>;
- clocks = <&socplldiv2 0>;
- reg = <0x0 0x1f51c000 0x0 0x1000>;
- reg-names = "csr-reg";
- clock-output-names = "pcie4clk";
- };
- };
-
- pcie0: pcie@1f2b0000 {
- status = "disabled";
- device_type = "pci";
- compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */
- 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */
- reg-names = "csr", "cfg";
- ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */
- 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
- dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
- 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
- interrupt-map-mask = <0x0 0x0 0x0 0x7>;
- interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
- 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
- 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
- 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
- dma-coherent;
- clocks = <&pcie0clk 0>;
- };
-
- pcie1: pcie@1f2c0000 {
- status = "disabled";
- device_type = "pci";
- compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = < 0x00 0x1f2c0000 0x0 0x00010000 /* Controller registers */
- 0xd0 0xd0000000 0x0 0x00040000>; /* PCI config space */
- reg-names = "csr", "cfg";
- ranges = <0x01000000 0x0 0x00000000 0xd0 0x10000000 0x00 0x00010000 /* io */
- 0x02000000 0x0 0x80000000 0xd1 0x80000000 0x00 0x80000000>; /* mem */
- dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
- 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
- interrupt-map-mask = <0x0 0x0 0x0 0x7>;
- interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc8 0x1
- 0x0 0x0 0x0 0x2 &gic 0x0 0xc9 0x1
- 0x0 0x0 0x0 0x3 &gic 0x0 0xca 0x1
- 0x0 0x0 0x0 0x4 &gic 0x0 0xcb 0x1>;
- dma-coherent;
- clocks = <&pcie1clk 0>;
- };
-
- pcie2: pcie@1f2d0000 {
- status = "disabled";
- device_type = "pci";
- compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = < 0x00 0x1f2d0000 0x0 0x00010000 /* Controller registers */
- 0x90 0xd0000000 0x0 0x00040000>; /* PCI config space */
- reg-names = "csr", "cfg";
- ranges = <0x01000000 0x0 0x00000000 0x90 0x10000000 0x0 0x00010000 /* io */
- 0x02000000 0x0 0x80000000 0x91 0x80000000 0x0 0x80000000>; /* mem */
- dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
- 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
- interrupt-map-mask = <0x0 0x0 0x0 0x7>;
- interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xce 0x1
- 0x0 0x0 0x0 0x2 &gic 0x0 0xcf 0x1
- 0x0 0x0 0x0 0x3 &gic 0x0 0xd0 0x1
- 0x0 0x0 0x0 0x4 &gic 0x0 0xd1 0x1>;
- dma-coherent;
- clocks = <&pcie2clk 0>;
- };
-
- pcie3: pcie@1f500000 {
- status = "disabled";
- device_type = "pci";
- compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = < 0x00 0x1f500000 0x0 0x00010000 /* Controller registers */
- 0xa0 0xd0000000 0x0 0x00040000>; /* PCI config space */
- reg-names = "csr", "cfg";
- ranges = <0x01000000 0x0 0x00000000 0xa0 0x10000000 0x0 0x00010000 /* io */
- 0x02000000 0x0 0x80000000 0xa1 0x80000000 0x0 0x80000000>; /* mem */
- dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
- 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
- interrupt-map-mask = <0x0 0x0 0x0 0x7>;
- interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xd4 0x1
- 0x0 0x0 0x0 0x2 &gic 0x0 0xd5 0x1
- 0x0 0x0 0x0 0x3 &gic 0x0 0xd6 0x1
- 0x0 0x0 0x0 0x4 &gic 0x0 0xd7 0x1>;
- dma-coherent;
- clocks = <&pcie3clk 0>;
- };
-
- pcie4: pcie@1f510000 {
- status = "disabled";
- device_type = "pci";
- compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = < 0x00 0x1f510000 0x0 0x00010000 /* Controller registers */
- 0xc0 0xd0000000 0x0 0x00200000>; /* PCI config space */
- reg-names = "csr", "cfg";
- ranges = <0x01000000 0x0 0x00000000 0xc0 0x10000000 0x0 0x00010000 /* io */
- 0x02000000 0x0 0x80000000 0xc1 0x80000000 0x0 0x80000000>; /* mem */
- dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
- 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
- interrupt-map-mask = <0x0 0x0 0x0 0x7>;
- interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xda 0x1
- 0x0 0x0 0x0 0x2 &gic 0x0 0xdb 0x1
- 0x0 0x0 0x0 0x3 &gic 0x0 0xdc 0x1
- 0x0 0x0 0x0 0x4 &gic 0x0 0xdd 0x1>;
- dma-coherent;
- clocks = <&pcie4clk 0>;
- };
-
- serial0: serial@1c020000 {
- status = "disabled";
- device_type = "serial";
- compatible = "ns16550a";
- reg = <0 0x1c020000 0x0 0x1000>;
- reg-shift = <2>;
- clock-frequency = <10000000>; /* Updated by bootloader */
- interrupt-parent = <&gic>;
- interrupts = <0x0 0x4c 0x4>;
- };
-
- serial1: serial@1c021000 {
- status = "disabled";
- device_type = "serial";
- compatible = "ns16550a";
- reg = <0 0x1c021000 0x0 0x1000>;
- reg-shift = <2>;
- clock-frequency = <10000000>; /* Updated by bootloader */
- interrupt-parent = <&gic>;
- interrupts = <0x0 0x4d 0x4>;
- };
-
- serial2: serial@1c022000 {
- status = "disabled";
- device_type = "serial";
- compatible = "ns16550a";
- reg = <0 0x1c022000 0x0 0x1000>;
- reg-shift = <2>;
- clock-frequency = <10000000>; /* Updated by bootloader */
- interrupt-parent = <&gic>;
- interrupts = <0x0 0x4e 0x4>;
- };
-
- serial3: serial@1c023000 {
- status = "disabled";
- device_type = "serial";
- compatible = "ns16550a";
- reg = <0 0x1c023000 0x0 0x1000>;
- reg-shift = <2>;
- clock-frequency = <10000000>; /* Updated by bootloader */
- interrupt-parent = <&gic>;
- interrupts = <0x0 0x4f 0x4>;
- };
-
- phy1: phy@1f21a000 {
- compatible = "apm,xgene-phy";
- reg = <0x0 0x1f21a000 0x0 0x100>;
- #phy-cells = <1>;
- clocks = <&sataphy1clk 0>;
- status = "disabled";
- apm,tx-boost-gain = <30 30 30 30 30 30>;
- apm,tx-eye-tuning = <2 10 10 2 10 10>;
- };
-
- phy2: phy@1f22a000 {
- compatible = "apm,xgene-phy";
- reg = <0x0 0x1f22a000 0x0 0x100>;
- #phy-cells = <1>;
- clocks = <&sataphy2clk 0>;
- status = "ok";
- apm,tx-boost-gain = <30 30 30 30 30 30>;
- apm,tx-eye-tuning = <1 10 10 2 10 10>;
- };
-
- phy3: phy@1f23a000 {
- compatible = "apm,xgene-phy";
- reg = <0x0 0x1f23a000 0x0 0x100>;
- #phy-cells = <1>;
- clocks = <&sataphy3clk 0>;
- status = "ok";
- apm,tx-boost-gain = <31 31 31 31 31 31>;
- apm,tx-eye-tuning = <2 10 10 2 10 10>;
- };
-
- sata1: sata@1a000000 {
- compatible = "apm,xgene-ahci";
- reg = <0x0 0x1a000000 0x0 0x1000>,
- <0x0 0x1f210000 0x0 0x1000>,
- <0x0 0x1f21d000 0x0 0x1000>,
- <0x0 0x1f21e000 0x0 0x1000>,
- <0x0 0x1f217000 0x0 0x1000>;
- interrupts = <0x0 0x86 0x4>;
- dma-coherent;
- status = "disabled";
- clocks = <&sata01clk 0>;
- phys = <&phy1 0>;
- phy-names = "sata-phy";
- };
-
- sata2: sata@1a400000 {
- compatible = "apm,xgene-ahci";
- reg = <0x0 0x1a400000 0x0 0x1000>,
- <0x0 0x1f220000 0x0 0x1000>,
- <0x0 0x1f22d000 0x0 0x1000>,
- <0x0 0x1f22e000 0x0 0x1000>,
- <0x0 0x1f227000 0x0 0x1000>;
- interrupts = <0x0 0x87 0x4>;
- dma-coherent;
- status = "ok";
- clocks = <&sata23clk 0>;
- phys = <&phy2 0>;
- phy-names = "sata-phy";
- };
-
- sata3: sata@1a800000 {
- compatible = "apm,xgene-ahci";
- reg = <0x0 0x1a800000 0x0 0x1000>,
- <0x0 0x1f230000 0x0 0x1000>,
- <0x0 0x1f23d000 0x0 0x1000>,
- <0x0 0x1f23e000 0x0 0x1000>;
- interrupts = <0x0 0x88 0x4>;
- dma-coherent;
- status = "ok";
- clocks = <&sata45clk 0>;
- phys = <&phy3 0>;
- phy-names = "sata-phy";
- };
-
- rtc: rtc@10510000 {
- compatible = "apm,xgene-rtc";
- reg = <0x0 0x10510000 0x0 0x400>;
- interrupts = <0x0 0x46 0x4>;
- #clock-cells = <1>;
- clocks = <&rtcclk 0>;
- };
-
- menet: ethernet@17020000 {
- compatible = "apm,xgene-enet";
- status = "disabled";
- reg = <0x0 0x17020000 0x0 0xd100>,
- <0x0 0X17030000 0x0 0X400>,
- <0x0 0X10000000 0x0 0X200>;
- reg-names = "enet_csr", "ring_csr", "ring_cmd";
- interrupts = <0x0 0x3c 0x4>;
- dma-coherent;
- clocks = <&menetclk 0>;
- /* mac address will be overwritten by the bootloader */
- local-mac-address = [00 00 00 00 00 00];
- phy-connection-type = "rgmii";
- phy-handle = <&menetphy>;
- mdio {
- compatible = "apm,xgene-mdio";
- #address-cells = <1>;
- #size-cells = <0>;
- menetphy: menetphy@3 {
- compatible = "ethernet-phy-id001c.c915";
- reg = <0x3>;
- };
-
- };
- };
-
- sgenet0: ethernet@1f210000 {
- compatible = "apm,xgene-enet";
- status = "disabled";
- reg = <0x0 0x1f210000 0x0 0x10000>,
- <0x0 0x1f200000 0x0 0X10000>,
- <0x0 0x1B000000 0x0 0X20000>;
- reg-names = "enet_csr", "ring_csr", "ring_cmd";
- interrupts = <0x0 0xA0 0x4>;
- dma-coherent;
- clocks = <&sge0clk 0>;
- local-mac-address = [00 00 00 00 00 00];
- phy-connection-type = "sgmii";
- };
-
- xgenet: ethernet@1f610000 {
- compatible = "apm,xgene-enet";
- status = "disabled";
- reg = <0x0 0x1f610000 0x0 0xd100>,
- <0x0 0x1f600000 0x0 0X400>,
- <0x0 0x18000000 0x0 0X200>;
- reg-names = "enet_csr", "ring_csr", "ring_cmd";
- interrupts = <0x0 0x60 0x4>;
- dma-coherent;
- clocks = <&xge0clk 0>;
- /* mac address will be overwritten by the bootloader */
- local-mac-address = [00 00 00 00 00 00];
- phy-connection-type = "xgmii";
- };
-
- rng: rng@10520000 {
- compatible = "apm,xgene-rng";
- reg = <0x0 0x10520000 0x0 0x100>;
- interrupts = <0x0 0x41 0x4>;
- clocks = <&rngpkaclk 0>;
- };
- };
-};
--- /dev/null
+dtb-$(CONFIG_ARCH_XGENE) += apm-mustang.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
--- /dev/null
+/*
+ * dts file for AppliedMicro (APM) Mustang Board
+ *
+ * Copyright (C) 2013, Applied Micro Circuits Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/dts-v1/;
+
+/include/ "apm-storm.dtsi"
+
+/ {
+ model = "APM X-Gene Mustang board";
+ compatible = "apm,mustang", "apm,xgene-storm";
+
+ chosen { };
+
+ memory {
+ device_type = "memory";
+ reg = < 0x1 0x00000000 0x0 0x80000000 >; /* Updated by bootloader */
+ };
+};
+
+&pcie0clk {
+ status = "ok";
+};
+
+&pcie0 {
+ status = "ok";
+};
+
+&serial0 {
+ status = "ok";
+};
+
+&menet {
+ status = "ok";
+};
+
+&sgenet0 {
+ status = "ok";
+};
+
+&xgenet {
+ status = "ok";
+};
--- /dev/null
+/*
+ * dts file for AppliedMicro (APM) X-Gene Storm SOC
+ *
+ * Copyright (C) 2013, Applied Micro Circuits Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+
+/ {
+ compatible = "apm,xgene-storm";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu@000 {
+ device_type = "cpu";
+ compatible = "apm,potenza", "arm,armv8";
+ reg = <0x0 0x000>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@001 {
+ device_type = "cpu";
+ compatible = "apm,potenza", "arm,armv8";
+ reg = <0x0 0x001>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@100 {
+ device_type = "cpu";
+ compatible = "apm,potenza", "arm,armv8";
+ reg = <0x0 0x100>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@101 {
+ device_type = "cpu";
+ compatible = "apm,potenza", "arm,armv8";
+ reg = <0x0 0x101>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@200 {
+ device_type = "cpu";
+ compatible = "apm,potenza", "arm,armv8";
+ reg = <0x0 0x200>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@201 {
+ device_type = "cpu";
+ compatible = "apm,potenza", "arm,armv8";
+ reg = <0x0 0x201>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@300 {
+ device_type = "cpu";
+ compatible = "apm,potenza", "arm,armv8";
+ reg = <0x0 0x300>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ cpu@301 {
+ device_type = "cpu";
+ compatible = "apm,potenza", "arm,armv8";
+ reg = <0x0 0x301>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x1 0x0000fff8>;
+ };
+ };
+
+ gic: interrupt-controller@78010000 {
+ compatible = "arm,cortex-a15-gic";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x0 0x78010000 0x0 0x1000>, /* GIC Dist */
+ <0x0 0x78020000 0x0 0x1000>, /* GIC CPU */
+ <0x0 0x78040000 0x0 0x2000>, /* GIC VCPU Control */
+ <0x0 0x78060000 0x0 0x2000>; /* GIC VCPU */
+ interrupts = <1 9 0xf04>; /* GIC Maintenence IRQ */
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 0 0xff01>, /* Secure Phys IRQ */
+ <1 13 0xff01>, /* Non-secure Phys IRQ */
+ <1 14 0xff01>, /* Virt IRQ */
+ <1 15 0xff01>; /* Hyp IRQ */
+ clock-frequency = <50000000>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ clocks {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ refclk: refclk {
+ compatible = "fixed-clock";
+ #clock-cells = <1>;
+ clock-frequency = <100000000>;
+ clock-output-names = "refclk";
+ };
+
+ pcppll: pcppll@17000100 {
+ compatible = "apm,xgene-pcppll-clock";
+ #clock-cells = <1>;
+ clocks = <&refclk 0>;
+ clock-names = "pcppll";
+ reg = <0x0 0x17000100 0x0 0x1000>;
+ clock-output-names = "pcppll";
+ type = <0>;
+ };
+
+ socpll: socpll@17000120 {
+ compatible = "apm,xgene-socpll-clock";
+ #clock-cells = <1>;
+ clocks = <&refclk 0>;
+ clock-names = "socpll";
+ reg = <0x0 0x17000120 0x0 0x1000>;
+ clock-output-names = "socpll";
+ type = <1>;
+ };
+
+ socplldiv2: socplldiv2 {
+ compatible = "fixed-factor-clock";
+ #clock-cells = <1>;
+ clocks = <&socpll 0>;
+ clock-names = "socplldiv2";
+ clock-mult = <1>;
+ clock-div = <2>;
+ clock-output-names = "socplldiv2";
+ };
+
+ qmlclk: qmlclk {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ clock-names = "qmlclk";
+ reg = <0x0 0x1703C000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "qmlclk";
+ };
+
+ ethclk: ethclk {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ clock-names = "ethclk";
+ reg = <0x0 0x17000000 0x0 0x1000>;
+ reg-names = "div-reg";
+ divider-offset = <0x238>;
+ divider-width = <0x9>;
+ divider-shift = <0x0>;
+ clock-output-names = "ethclk";
+ };
+
+ menetclk: menetclk {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <ðclk 0>;
+ reg = <0x0 0x1702C000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "menetclk";
+ };
+
+ sge0clk: sge0clk@1f21c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f21c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ csr-mask = <0x3>;
+ clock-output-names = "sge0clk";
+ };
+
+ xge0clk: xge0clk@1f61c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f61c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ csr-mask = <0x3>;
+ clock-output-names = "xge0clk";
+ };
+
+ sataphy1clk: sataphy1clk@1f21c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f21c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "sataphy1clk";
+ status = "disabled";
+ csr-offset = <0x4>;
+ csr-mask = <0x00>;
+ enable-offset = <0x0>;
+ enable-mask = <0x06>;
+ };
+
+ sataphy2clk: sataphy1clk@1f22c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f22c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "sataphy2clk";
+ status = "ok";
+ csr-offset = <0x4>;
+ csr-mask = <0x3a>;
+ enable-offset = <0x0>;
+ enable-mask = <0x06>;
+ };
+
+ sataphy3clk: sataphy1clk@1f23c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f23c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "sataphy3clk";
+ status = "ok";
+ csr-offset = <0x4>;
+ csr-mask = <0x3a>;
+ enable-offset = <0x0>;
+ enable-mask = <0x06>;
+ };
+
+ sata01clk: sata01clk@1f21c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f21c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "sata01clk";
+ csr-offset = <0x4>;
+ csr-mask = <0x05>;
+ enable-offset = <0x0>;
+ enable-mask = <0x39>;
+ };
+
+ sata23clk: sata23clk@1f22c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f22c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "sata23clk";
+ csr-offset = <0x4>;
+ csr-mask = <0x05>;
+ enable-offset = <0x0>;
+ enable-mask = <0x39>;
+ };
+
+ sata45clk: sata45clk@1f23c000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f23c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "sata45clk";
+ csr-offset = <0x4>;
+ csr-mask = <0x05>;
+ enable-offset = <0x0>;
+ enable-mask = <0x39>;
+ };
+
+ rtcclk: rtcclk@17000000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x17000000 0x0 0x2000>;
+ reg-names = "csr-reg";
+ csr-offset = <0xc>;
+ csr-mask = <0x2>;
+ enable-offset = <0x10>;
+ enable-mask = <0x2>;
+ clock-output-names = "rtcclk";
+ };
+
+ rngpkaclk: rngpkaclk@17000000 {
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x17000000 0x0 0x2000>;
+ reg-names = "csr-reg";
+ csr-offset = <0xc>;
+ csr-mask = <0x10>;
+ enable-offset = <0x10>;
+ enable-mask = <0x10>;
+ clock-output-names = "rngpkaclk";
+ };
+
+ pcie0clk: pcie0clk@1f2bc000 {
+ status = "disabled";
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f2bc000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "pcie0clk";
+ };
+
+ pcie1clk: pcie1clk@1f2cc000 {
+ status = "disabled";
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f2cc000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "pcie1clk";
+ };
+
+ pcie2clk: pcie2clk@1f2dc000 {
+ status = "disabled";
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f2dc000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "pcie2clk";
+ };
+
+ pcie3clk: pcie3clk@1f50c000 {
+ status = "disabled";
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f50c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "pcie3clk";
+ };
+
+ pcie4clk: pcie4clk@1f51c000 {
+ status = "disabled";
+ compatible = "apm,xgene-device-clock";
+ #clock-cells = <1>;
+ clocks = <&socplldiv2 0>;
+ reg = <0x0 0x1f51c000 0x0 0x1000>;
+ reg-names = "csr-reg";
+ clock-output-names = "pcie4clk";
+ };
+ };
+
+ pcie0: pcie@1f2b0000 {
+ status = "disabled";
+ device_type = "pci";
+ compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = < 0x00 0x1f2b0000 0x0 0x00010000 /* Controller registers */
+ 0xe0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+ reg-names = "csr", "cfg";
+ ranges = <0x01000000 0x00 0x00000000 0xe0 0x10000000 0x00 0x00010000 /* io */
+ 0x02000000 0x00 0x80000000 0xe1 0x80000000 0x00 0x80000000>; /* mem */
+ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+ 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc2 0x1
+ 0x0 0x0 0x0 0x2 &gic 0x0 0xc3 0x1
+ 0x0 0x0 0x0 0x3 &gic 0x0 0xc4 0x1
+ 0x0 0x0 0x0 0x4 &gic 0x0 0xc5 0x1>;
+ dma-coherent;
+ clocks = <&pcie0clk 0>;
+ };
+
+ pcie1: pcie@1f2c0000 {
+ status = "disabled";
+ device_type = "pci";
+ compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = < 0x00 0x1f2c0000 0x0 0x00010000 /* Controller registers */
+ 0xd0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+ reg-names = "csr", "cfg";
+ ranges = <0x01000000 0x0 0x00000000 0xd0 0x10000000 0x00 0x00010000 /* io */
+ 0x02000000 0x0 0x80000000 0xd1 0x80000000 0x00 0x80000000>; /* mem */
+ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+ 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xc8 0x1
+ 0x0 0x0 0x0 0x2 &gic 0x0 0xc9 0x1
+ 0x0 0x0 0x0 0x3 &gic 0x0 0xca 0x1
+ 0x0 0x0 0x0 0x4 &gic 0x0 0xcb 0x1>;
+ dma-coherent;
+ clocks = <&pcie1clk 0>;
+ };
+
+ pcie2: pcie@1f2d0000 {
+ status = "disabled";
+ device_type = "pci";
+ compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = < 0x00 0x1f2d0000 0x0 0x00010000 /* Controller registers */
+ 0x90 0xd0000000 0x0 0x00040000>; /* PCI config space */
+ reg-names = "csr", "cfg";
+ ranges = <0x01000000 0x0 0x00000000 0x90 0x10000000 0x0 0x00010000 /* io */
+ 0x02000000 0x0 0x80000000 0x91 0x80000000 0x0 0x80000000>; /* mem */
+ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+ 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xce 0x1
+ 0x0 0x0 0x0 0x2 &gic 0x0 0xcf 0x1
+ 0x0 0x0 0x0 0x3 &gic 0x0 0xd0 0x1
+ 0x0 0x0 0x0 0x4 &gic 0x0 0xd1 0x1>;
+ dma-coherent;
+ clocks = <&pcie2clk 0>;
+ };
+
+ pcie3: pcie@1f500000 {
+ status = "disabled";
+ device_type = "pci";
+ compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = < 0x00 0x1f500000 0x0 0x00010000 /* Controller registers */
+ 0xa0 0xd0000000 0x0 0x00040000>; /* PCI config space */
+ reg-names = "csr", "cfg";
+ ranges = <0x01000000 0x0 0x00000000 0xa0 0x10000000 0x0 0x00010000 /* io */
+ 0x02000000 0x0 0x80000000 0xa1 0x80000000 0x0 0x80000000>; /* mem */
+ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+ 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xd4 0x1
+ 0x0 0x0 0x0 0x2 &gic 0x0 0xd5 0x1
+ 0x0 0x0 0x0 0x3 &gic 0x0 0xd6 0x1
+ 0x0 0x0 0x0 0x4 &gic 0x0 0xd7 0x1>;
+ dma-coherent;
+ clocks = <&pcie3clk 0>;
+ };
+
+ pcie4: pcie@1f510000 {
+ status = "disabled";
+ device_type = "pci";
+ compatible = "apm,xgene-storm-pcie", "apm,xgene-pcie";
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ reg = < 0x00 0x1f510000 0x0 0x00010000 /* Controller registers */
+ 0xc0 0xd0000000 0x0 0x00200000>; /* PCI config space */
+ reg-names = "csr", "cfg";
+ ranges = <0x01000000 0x0 0x00000000 0xc0 0x10000000 0x0 0x00010000 /* io */
+ 0x02000000 0x0 0x80000000 0xc1 0x80000000 0x0 0x80000000>; /* mem */
+ dma-ranges = <0x42000000 0x80 0x00000000 0x80 0x00000000 0x00 0x80000000
+ 0x42000000 0x00 0x00000000 0x00 0x00000000 0x80 0x00000000>;
+ interrupt-map-mask = <0x0 0x0 0x0 0x7>;
+ interrupt-map = <0x0 0x0 0x0 0x1 &gic 0x0 0xda 0x1
+ 0x0 0x0 0x0 0x2 &gic 0x0 0xdb 0x1
+ 0x0 0x0 0x0 0x3 &gic 0x0 0xdc 0x1
+ 0x0 0x0 0x0 0x4 &gic 0x0 0xdd 0x1>;
+ dma-coherent;
+ clocks = <&pcie4clk 0>;
+ };
+
+ serial0: serial@1c020000 {
+ status = "disabled";
+ device_type = "serial";
+ compatible = "ns16550a";
+ reg = <0 0x1c020000 0x0 0x1000>;
+ reg-shift = <2>;
+ clock-frequency = <10000000>; /* Updated by bootloader */
+ interrupt-parent = <&gic>;
+ interrupts = <0x0 0x4c 0x4>;
+ };
+
+ serial1: serial@1c021000 {
+ status = "disabled";
+ device_type = "serial";
+ compatible = "ns16550a";
+ reg = <0 0x1c021000 0x0 0x1000>;
+ reg-shift = <2>;
+ clock-frequency = <10000000>; /* Updated by bootloader */
+ interrupt-parent = <&gic>;
+ interrupts = <0x0 0x4d 0x4>;
+ };
+
+ serial2: serial@1c022000 {
+ status = "disabled";
+ device_type = "serial";
+ compatible = "ns16550a";
+ reg = <0 0x1c022000 0x0 0x1000>;
+ reg-shift = <2>;
+ clock-frequency = <10000000>; /* Updated by bootloader */
+ interrupt-parent = <&gic>;
+ interrupts = <0x0 0x4e 0x4>;
+ };
+
+ serial3: serial@1c023000 {
+ status = "disabled";
+ device_type = "serial";
+ compatible = "ns16550a";
+ reg = <0 0x1c023000 0x0 0x1000>;
+ reg-shift = <2>;
+ clock-frequency = <10000000>; /* Updated by bootloader */
+ interrupt-parent = <&gic>;
+ interrupts = <0x0 0x4f 0x4>;
+ };
+
+ phy1: phy@1f21a000 {
+ compatible = "apm,xgene-phy";
+ reg = <0x0 0x1f21a000 0x0 0x100>;
+ #phy-cells = <1>;
+ clocks = <&sataphy1clk 0>;
+ status = "disabled";
+ apm,tx-boost-gain = <30 30 30 30 30 30>;
+ apm,tx-eye-tuning = <2 10 10 2 10 10>;
+ };
+
+ phy2: phy@1f22a000 {
+ compatible = "apm,xgene-phy";
+ reg = <0x0 0x1f22a000 0x0 0x100>;
+ #phy-cells = <1>;
+ clocks = <&sataphy2clk 0>;
+ status = "ok";
+ apm,tx-boost-gain = <30 30 30 30 30 30>;
+ apm,tx-eye-tuning = <1 10 10 2 10 10>;
+ };
+
+ phy3: phy@1f23a000 {
+ compatible = "apm,xgene-phy";
+ reg = <0x0 0x1f23a000 0x0 0x100>;
+ #phy-cells = <1>;
+ clocks = <&sataphy3clk 0>;
+ status = "ok";
+ apm,tx-boost-gain = <31 31 31 31 31 31>;
+ apm,tx-eye-tuning = <2 10 10 2 10 10>;
+ };
+
+ sata1: sata@1a000000 {
+ compatible = "apm,xgene-ahci";
+ reg = <0x0 0x1a000000 0x0 0x1000>,
+ <0x0 0x1f210000 0x0 0x1000>,
+ <0x0 0x1f21d000 0x0 0x1000>,
+ <0x0 0x1f21e000 0x0 0x1000>,
+ <0x0 0x1f217000 0x0 0x1000>;
+ interrupts = <0x0 0x86 0x4>;
+ dma-coherent;
+ status = "disabled";
+ clocks = <&sata01clk 0>;
+ phys = <&phy1 0>;
+ phy-names = "sata-phy";
+ };
+
+ sata2: sata@1a400000 {
+ compatible = "apm,xgene-ahci";
+ reg = <0x0 0x1a400000 0x0 0x1000>,
+ <0x0 0x1f220000 0x0 0x1000>,
+ <0x0 0x1f22d000 0x0 0x1000>,
+ <0x0 0x1f22e000 0x0 0x1000>,
+ <0x0 0x1f227000 0x0 0x1000>;
+ interrupts = <0x0 0x87 0x4>;
+ dma-coherent;
+ status = "ok";
+ clocks = <&sata23clk 0>;
+ phys = <&phy2 0>;
+ phy-names = "sata-phy";
+ };
+
+ sata3: sata@1a800000 {
+ compatible = "apm,xgene-ahci";
+ reg = <0x0 0x1a800000 0x0 0x1000>,
+ <0x0 0x1f230000 0x0 0x1000>,
+ <0x0 0x1f23d000 0x0 0x1000>,
+ <0x0 0x1f23e000 0x0 0x1000>;
+ interrupts = <0x0 0x88 0x4>;
+ dma-coherent;
+ status = "ok";
+ clocks = <&sata45clk 0>;
+ phys = <&phy3 0>;
+ phy-names = "sata-phy";
+ };
+
+ rtc: rtc@10510000 {
+ compatible = "apm,xgene-rtc";
+ reg = <0x0 0x10510000 0x0 0x400>;
+ interrupts = <0x0 0x46 0x4>;
+ #clock-cells = <1>;
+ clocks = <&rtcclk 0>;
+ };
+
+ menet: ethernet@17020000 {
+ compatible = "apm,xgene-enet";
+ status = "disabled";
+ reg = <0x0 0x17020000 0x0 0xd100>,
+ <0x0 0X17030000 0x0 0Xc300>,
+ <0x0 0X10000000 0x0 0X200>;
+ reg-names = "enet_csr", "ring_csr", "ring_cmd";
+ interrupts = <0x0 0x3c 0x4>;
+ dma-coherent;
+ clocks = <&menetclk 0>;
+ /* mac address will be overwritten by the bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ phy-connection-type = "rgmii";
+ phy-handle = <&menetphy>;
+ mdio {
+ compatible = "apm,xgene-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ menetphy: menetphy@3 {
+ compatible = "ethernet-phy-id001c.c915";
+ reg = <0x3>;
+ };
+
+ };
+ };
+
+ sgenet0: ethernet@1f210000 {
+ compatible = "apm,xgene-enet";
+ status = "disabled";
+ reg = <0x0 0x1f210000 0x0 0xd100>,
+ <0x0 0x1f200000 0x0 0Xc300>,
+ <0x0 0x1B000000 0x0 0X200>;
+ reg-names = "enet_csr", "ring_csr", "ring_cmd";
+ interrupts = <0x0 0xA0 0x4>;
+ dma-coherent;
+ clocks = <&sge0clk 0>;
+ local-mac-address = [00 00 00 00 00 00];
+ phy-connection-type = "sgmii";
+ };
+
+ xgenet: ethernet@1f610000 {
+ compatible = "apm,xgene-enet";
+ status = "disabled";
+ reg = <0x0 0x1f610000 0x0 0xd100>,
+ <0x0 0x1f600000 0x0 0Xc300>,
+ <0x0 0x18000000 0x0 0X200>;
+ reg-names = "enet_csr", "ring_csr", "ring_cmd";
+ interrupts = <0x0 0x60 0x4>;
+ dma-coherent;
+ clocks = <&xge0clk 0>;
+ /* mac address will be overwritten by the bootloader */
+ local-mac-address = [00 00 00 00 00 00];
+ phy-connection-type = "xgmii";
+ };
+
+ rng: rng@10520000 {
+ compatible = "apm,xgene-rng";
+ reg = <0x0 0x10520000 0x0 0x100>;
+ interrupts = <0x0 0x41 0x4>;
+ clocks = <&rngpkaclk 0>;
+ };
+ };
+};
--- /dev/null
+dtb-$(CONFIG_ARCH_VEXPRESS) += foundation-v8.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += juno.dtb
+dtb-$(CONFIG_ARCH_VEXPRESS) += rtsm_ve-aemv8a.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
--- /dev/null
+/*
+ * ARM Ltd.
+ *
+ * ARMv8 Foundation model DTS
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+ model = "Foundation-v8A";
+ compatible = "arm,foundation-aarch64", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ aliases {
+ serial0 = &v2m_serial0;
+ serial1 = &v2m_serial1;
+ serial2 = &v2m_serial2;
+ serial3 = &v2m_serial3;
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x2>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x3>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x80000000>,
+ <0x00000008 0x80000000 0 0x80000000>;
+ };
+
+ gic: interrupt-controller@2c001000 {
+ compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0x2c001000 0 0x1000>,
+ <0x0 0x2c002000 0 0x1000>,
+ <0x0 0x2c004000 0 0x2000>,
+ <0x0 0x2c006000 0 0x2000>;
+ interrupts = <1 9 0xf04>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 0xf08>,
+ <1 14 0xf08>,
+ <1 11 0xf08>,
+ <1 10 0xf08>;
+ clock-frequency = <100000000>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <0 60 4>,
+ <0 61 4>,
+ <0 62 4>,
+ <0 63 4>;
+ };
+
+ smb {
+ compatible = "arm,vexpress,v2m-p1", "simple-bus";
+ arm,v2m-memory-map = "rs1";
+ #address-cells = <2>; /* SMB chipselect number and offset */
+ #size-cells = <1>;
+
+ ranges = <0 0 0 0x08000000 0x04000000>,
+ <1 0 0 0x14000000 0x04000000>,
+ <2 0 0 0x18000000 0x04000000>,
+ <3 0 0 0x1c000000 0x04000000>,
+ <4 0 0 0x0c000000 0x04000000>,
+ <5 0 0 0x10000000 0x04000000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 63>;
+ interrupt-map = <0 0 0 &gic 0 0 4>,
+ <0 0 1 &gic 0 1 4>,
+ <0 0 2 &gic 0 2 4>,
+ <0 0 3 &gic 0 3 4>,
+ <0 0 4 &gic 0 4 4>,
+ <0 0 5 &gic 0 5 4>,
+ <0 0 6 &gic 0 6 4>,
+ <0 0 7 &gic 0 7 4>,
+ <0 0 8 &gic 0 8 4>,
+ <0 0 9 &gic 0 9 4>,
+ <0 0 10 &gic 0 10 4>,
+ <0 0 11 &gic 0 11 4>,
+ <0 0 12 &gic 0 12 4>,
+ <0 0 13 &gic 0 13 4>,
+ <0 0 14 &gic 0 14 4>,
+ <0 0 15 &gic 0 15 4>,
+ <0 0 16 &gic 0 16 4>,
+ <0 0 17 &gic 0 17 4>,
+ <0 0 18 &gic 0 18 4>,
+ <0 0 19 &gic 0 19 4>,
+ <0 0 20 &gic 0 20 4>,
+ <0 0 21 &gic 0 21 4>,
+ <0 0 22 &gic 0 22 4>,
+ <0 0 23 &gic 0 23 4>,
+ <0 0 24 &gic 0 24 4>,
+ <0 0 25 &gic 0 25 4>,
+ <0 0 26 &gic 0 26 4>,
+ <0 0 27 &gic 0 27 4>,
+ <0 0 28 &gic 0 28 4>,
+ <0 0 29 &gic 0 29 4>,
+ <0 0 30 &gic 0 30 4>,
+ <0 0 31 &gic 0 31 4>,
+ <0 0 32 &gic 0 32 4>,
+ <0 0 33 &gic 0 33 4>,
+ <0 0 34 &gic 0 34 4>,
+ <0 0 35 &gic 0 35 4>,
+ <0 0 36 &gic 0 36 4>,
+ <0 0 37 &gic 0 37 4>,
+ <0 0 38 &gic 0 38 4>,
+ <0 0 39 &gic 0 39 4>,
+ <0 0 40 &gic 0 40 4>,
+ <0 0 41 &gic 0 41 4>,
+ <0 0 42 &gic 0 42 4>;
+
+ ethernet@2,02000000 {
+ compatible = "smsc,lan91c111";
+ reg = <2 0x02000000 0x10000>;
+ interrupts = <15>;
+ };
+
+ v2m_clk24mhz: clk24mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "v2m:clk24mhz";
+ };
+
+ v2m_refclk1mhz: refclk1mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000>;
+ clock-output-names = "v2m:refclk1mhz";
+ };
+
+ v2m_refclk32khz: refclk32khz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "v2m:refclk32khz";
+ };
+
+ iofpga@3,00000000 {
+ compatible = "arm,amba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 3 0 0x200000>;
+
+ v2m_sysreg: sysreg@010000 {
+ compatible = "arm,vexpress-sysreg";
+ reg = <0x010000 0x1000>;
+ };
+
+ v2m_serial0: uart@090000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x090000 0x1000>;
+ interrupts = <5>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial1: uart@0a0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0a0000 0x1000>;
+ interrupts = <6>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial2: uart@0b0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0b0000 0x1000>;
+ interrupts = <7>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial3: uart@0c0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0c0000 0x1000>;
+ interrupts = <8>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ virtio_block@0130000 {
+ compatible = "virtio,mmio";
+ reg = <0x130000 0x200>;
+ interrupts = <42>;
+ };
+ };
+ };
+};
--- /dev/null
+/*
+ * ARM Juno Platform clocks
+ *
+ * Copyright (c) 2013-2014 ARM Ltd
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ *
+ */
+
+ /* SoC fixed clocks */
+ soc_uartclk: refclk72738khz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <7273800>;
+ clock-output-names = "juno:uartclk";
+ };
+
+ soc_usb48mhz: clk48mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <48000000>;
+ clock-output-names = "clk48mhz";
+ };
+
+ soc_smc50mhz: clk50mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ clock-output-names = "smc_clk";
+ };
+
+ soc_refclk100mhz: refclk100mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <100000000>;
+ clock-output-names = "apb_pclk";
+ };
+
+ soc_faxiclk: refclk533mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <533000000>;
+ clock-output-names = "faxi_clk";
+ };
--- /dev/null
+/*
+ * ARM Juno Platform motherboard peripherals
+ *
+ * Copyright (c) 2013-2014 ARM Ltd
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ *
+ */
+
+ mb_clk24mhz: clk24mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "juno_mb:clk24mhz";
+ };
+
+ mb_clk25mhz: clk25mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ clock-output-names = "juno_mb:clk25mhz";
+ };
+
+ motherboard {
+ compatible = "arm,vexpress,v2p-p1", "simple-bus";
+ #address-cells = <2>; /* SMB chipselect number and offset */
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+ ranges;
+ model = "V2M-Juno";
+ arm,hbi = <0x252>;
+ arm,vexpress,site = <0>;
+ arm,v2m-memory-map = "rs1";
+
+ mb_fixed_3v3: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "MCC_SB_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ ethernet@2,00000000 {
+ compatible = "smsc,lan9118", "smsc,lan9115";
+ reg = <2 0x00000000 0x10000>;
+ interrupts = <3>;
+ phy-mode = "mii";
+ reg-io-width = <4>;
+ smsc,irq-active-high;
+ smsc,irq-push-pull;
+ clocks = <&mb_clk25mhz>;
+ vdd33a-supply = <&mb_fixed_3v3>;
+ vddvario-supply = <&mb_fixed_3v3>;
+ };
+
+ usb@5,00000000 {
+ compatible = "nxp,usb-isp1763";
+ reg = <5 0x00000000 0x20000>;
+ bus-width = <16>;
+ interrupts = <4>;
+ };
+
+ iofpga@3,00000000 {
+ compatible = "arm,amba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 3 0 0x200000>;
+
+ mmci@050000 {
+ compatible = "arm,pl180", "arm,primecell";
+ reg = <0x050000 0x1000>;
+ interrupts = <5>;
+ /* cd-gpios = <&v2m_mmc_gpios 0 0>;
+ wp-gpios = <&v2m_mmc_gpios 1 0>; */
+ max-frequency = <12000000>;
+ vmmc-supply = <&mb_fixed_3v3>;
+ clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+ clock-names = "mclk", "apb_pclk";
+ };
+
+ kmi@060000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x060000 0x1000>;
+ interrupts = <8>;
+ clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ kmi@070000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x070000 0x1000>;
+ interrupts = <8>;
+ clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ wdt@0f0000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0f0000 0x10000>;
+ interrupts = <7>;
+ clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+ clock-names = "wdogclk", "apb_pclk";
+ };
+
+ v2m_timer01: timer@110000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x110000 0x10000>;
+ interrupts = <9>;
+ clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+ clock-names = "timclken1", "apb_pclk";
+ };
+
+ v2m_timer23: timer@120000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x120000 0x10000>;
+ interrupts = <9>;
+ clocks = <&mb_clk24mhz>, <&soc_smc50mhz>;
+ clock-names = "timclken1", "apb_pclk";
+ };
+
+ rtc@170000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x170000 0x10000>;
+ interrupts = <0>;
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ };
+ };
+ };
--- /dev/null
+/*
+ * ARM Ltd. Juno Platform
+ *
+ * Copyright (c) 2013-2014 ARM Ltd.
+ *
+ * This file is licensed under a dual GPLv2 or BSD license.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ model = "ARM Juno development board (r0)";
+ compatible = "arm,juno", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ aliases {
+ serial0 = &soc_uart0;
+ };
+
+ chosen {
+ stdout-path = &soc_uart0;
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ A57_0: cpu@0 {
+ compatible = "arm,cortex-a57","arm,armv8";
+ reg = <0x0 0x0>;
+ device_type = "cpu";
+ enable-method = "psci";
+ };
+
+ A57_1: cpu@1 {
+ compatible = "arm,cortex-a57","arm,armv8";
+ reg = <0x0 0x1>;
+ device_type = "cpu";
+ enable-method = "psci";
+ };
+
+ A53_0: cpu@100 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x100>;
+ device_type = "cpu";
+ enable-method = "psci";
+ };
+
+ A53_1: cpu@101 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x101>;
+ device_type = "cpu";
+ enable-method = "psci";
+ };
+
+ A53_2: cpu@102 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x102>;
+ device_type = "cpu";
+ enable-method = "psci";
+ };
+
+ A53_3: cpu@103 {
+ compatible = "arm,cortex-a53","arm,armv8";
+ reg = <0x0 0x103>;
+ device_type = "cpu";
+ enable-method = "psci";
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ /* last 16MB of the first memory area is reserved for secure world use by firmware */
+ reg = <0x00000000 0x80000000 0x0 0x7f000000>,
+ <0x00000008 0x80000000 0x1 0x80000000>;
+ };
+
+ gic: interrupt-controller@2c001000 {
+ compatible = "arm,gic-400", "arm,cortex-a15-gic";
+ reg = <0x0 0x2c010000 0 0x1000>,
+ <0x0 0x2c02f000 0 0x2000>,
+ <0x0 0x2c04f000 0 0x2000>,
+ <0x0 0x2c06f000 0 0x2000>;
+ #address-cells = <0>;
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_HIGH)>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 02 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 06 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ /include/ "juno-clocks.dtsi"
+
+ dma@7ff00000 {
+ compatible = "arm,pl330", "arm,primecell";
+ reg = <0x0 0x7ff00000 0 0x1000>;
+ #dma-cells = <1>;
+ #dma-channels = <8>;
+ #dma-requests = <32>;
+ interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_faxiclk>;
+ clock-names = "apb_pclk";
+ };
+
+ soc_uart0: uart@7ff80000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0 0x7ff80000 0x0 0x1000>;
+ interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_uartclk>, <&soc_refclk100mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ i2c@7ffa0000 {
+ compatible = "snps,designware-i2c";
+ reg = <0x0 0x7ffa0000 0x0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
+ clock-frequency = <400000>;
+ i2c-sda-hold-time-ns = <500>;
+ clocks = <&soc_smc50mhz>;
+
+ dvi0: dvi-transmitter@70 {
+ compatible = "nxp,tda998x";
+ reg = <0x70>;
+ };
+
+ dvi1: dvi-transmitter@71 {
+ compatible = "nxp,tda998x";
+ reg = <0x71>;
+ };
+ };
+
+ ohci@7ffb0000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0x7ffb0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_usb48mhz>;
+ };
+
+ ehci@7ffc0000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0x7ffc0000 0x0 0x10000>;
+ interrupts = <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_usb48mhz>;
+ };
+
+ memory-controller@7ffd0000 {
+ compatible = "arm,pl354", "arm,primecell";
+ reg = <0 0x7ffd0000 0 0x1000>;
+ interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&soc_smc50mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ smb {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x08000000 0x04000000>,
+ <1 0 0 0x14000000 0x04000000>,
+ <2 0 0 0x18000000 0x04000000>,
+ <3 0 0 0x1c000000 0x04000000>,
+ <4 0 0 0x0c000000 0x04000000>,
+ <5 0 0 0x10000000 0x04000000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 15>;
+ interrupt-map = <0 0 0 &gic 0 68 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 1 &gic 0 69 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 2 &gic 0 70 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 3 &gic 0 160 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 4 &gic 0 161 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 5 &gic 0 162 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 6 &gic 0 163 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 7 &gic 0 164 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 8 &gic 0 165 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 9 &gic 0 166 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 10 &gic 0 167 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 11 &gic 0 168 IRQ_TYPE_LEVEL_HIGH>,
+ <0 0 12 &gic 0 169 IRQ_TYPE_LEVEL_HIGH>;
+
+ /include/ "juno-motherboard.dtsi"
+ };
+};
--- /dev/null
+/*
+ * ARM Ltd. Fast Models
+ *
+ * Architecture Envelope Model (AEM) ARMv8-A
+ * ARMAEMv8AMPCT
+ *
+ * RTSM_VE_AEMv8A.lisa
+ */
+
+/dts-v1/;
+
+/memreserve/ 0x80000000 0x00010000;
+
+/ {
+ model = "RTSM_VE_AEMv8A";
+ compatible = "arm,rtsm_ve,aemv8a", "arm,vexpress";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ chosen { };
+
+ aliases {
+ serial0 = &v2m_serial0;
+ serial1 = &v2m_serial1;
+ serial2 = &v2m_serial2;
+ serial3 = &v2m_serial3;
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x2>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,armv8";
+ reg = <0x0 0x3>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x8000fff8>;
+ };
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x00000000 0x80000000 0 0x80000000>,
+ <0x00000008 0x80000000 0 0x80000000>;
+ };
+
+ gic: interrupt-controller@2c001000 {
+ compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
+ #interrupt-cells = <3>;
+ #address-cells = <0>;
+ interrupt-controller;
+ reg = <0x0 0x2c001000 0 0x1000>,
+ <0x0 0x2c002000 0 0x1000>,
+ <0x0 0x2c004000 0 0x2000>,
+ <0x0 0x2c006000 0 0x2000>;
+ interrupts = <1 9 0xf04>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 0xf08>,
+ <1 14 0xf08>,
+ <1 11 0xf08>,
+ <1 10 0xf08>;
+ clock-frequency = <100000000>;
+ };
+
+ pmu {
+ compatible = "arm,armv8-pmuv3";
+ interrupts = <0 60 4>,
+ <0 61 4>,
+ <0 62 4>,
+ <0 63 4>;
+ };
+
+ smb {
+ compatible = "simple-bus";
+
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0 0x08000000 0x04000000>,
+ <1 0 0 0x14000000 0x04000000>,
+ <2 0 0 0x18000000 0x04000000>,
+ <3 0 0 0x1c000000 0x04000000>,
+ <4 0 0 0x0c000000 0x04000000>,
+ <5 0 0 0x10000000 0x04000000>;
+
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 63>;
+ interrupt-map = <0 0 0 &gic 0 0 4>,
+ <0 0 1 &gic 0 1 4>,
+ <0 0 2 &gic 0 2 4>,
+ <0 0 3 &gic 0 3 4>,
+ <0 0 4 &gic 0 4 4>,
+ <0 0 5 &gic 0 5 4>,
+ <0 0 6 &gic 0 6 4>,
+ <0 0 7 &gic 0 7 4>,
+ <0 0 8 &gic 0 8 4>,
+ <0 0 9 &gic 0 9 4>,
+ <0 0 10 &gic 0 10 4>,
+ <0 0 11 &gic 0 11 4>,
+ <0 0 12 &gic 0 12 4>,
+ <0 0 13 &gic 0 13 4>,
+ <0 0 14 &gic 0 14 4>,
+ <0 0 15 &gic 0 15 4>,
+ <0 0 16 &gic 0 16 4>,
+ <0 0 17 &gic 0 17 4>,
+ <0 0 18 &gic 0 18 4>,
+ <0 0 19 &gic 0 19 4>,
+ <0 0 20 &gic 0 20 4>,
+ <0 0 21 &gic 0 21 4>,
+ <0 0 22 &gic 0 22 4>,
+ <0 0 23 &gic 0 23 4>,
+ <0 0 24 &gic 0 24 4>,
+ <0 0 25 &gic 0 25 4>,
+ <0 0 26 &gic 0 26 4>,
+ <0 0 27 &gic 0 27 4>,
+ <0 0 28 &gic 0 28 4>,
+ <0 0 29 &gic 0 29 4>,
+ <0 0 30 &gic 0 30 4>,
+ <0 0 31 &gic 0 31 4>,
+ <0 0 32 &gic 0 32 4>,
+ <0 0 33 &gic 0 33 4>,
+ <0 0 34 &gic 0 34 4>,
+ <0 0 35 &gic 0 35 4>,
+ <0 0 36 &gic 0 36 4>,
+ <0 0 37 &gic 0 37 4>,
+ <0 0 38 &gic 0 38 4>,
+ <0 0 39 &gic 0 39 4>,
+ <0 0 40 &gic 0 40 4>,
+ <0 0 41 &gic 0 41 4>,
+ <0 0 42 &gic 0 42 4>;
+
+ /include/ "rtsm_ve-motherboard.dtsi"
+ };
+};
--- /dev/null
+/*
+ * ARM Ltd. Fast Models
+ *
+ * Versatile Express (VE) system model
+ * Motherboard component
+ *
+ * VEMotherBoard.lisa
+ */
+
+ motherboard {
+ arm,v2m-memory-map = "rs1";
+ compatible = "arm,vexpress,v2m-p1", "simple-bus";
+ #address-cells = <2>; /* SMB chipselect number and offset */
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+ ranges;
+
+ flash@0,00000000 {
+ compatible = "arm,vexpress-flash", "cfi-flash";
+ reg = <0 0x00000000 0x04000000>,
+ <4 0x00000000 0x04000000>;
+ bank-width = <4>;
+ };
+
+ v2m_video_ram: vram@2,00000000 {
+ compatible = "arm,vexpress-vram";
+ reg = <2 0x00000000 0x00800000>;
+ };
+
+ ethernet@2,02000000 {
+ compatible = "smsc,lan91c111";
+ reg = <2 0x02000000 0x10000>;
+ interrupts = <15>;
+ };
+
+ v2m_clk24mhz: clk24mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <24000000>;
+ clock-output-names = "v2m:clk24mhz";
+ };
+
+ v2m_refclk1mhz: refclk1mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <1000000>;
+ clock-output-names = "v2m:refclk1mhz";
+ };
+
+ v2m_refclk32khz: refclk32khz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "v2m:refclk32khz";
+ };
+
+ iofpga@3,00000000 {
+ compatible = "arm,amba-bus", "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 3 0 0x200000>;
+
+ v2m_sysreg: sysreg@010000 {
+ compatible = "arm,vexpress-sysreg";
+ reg = <0x010000 0x1000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ v2m_sysctl: sysctl@020000 {
+ compatible = "arm,sp810", "arm,primecell";
+ reg = <0x020000 0x1000>;
+ clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
+ clock-names = "refclk", "timclk", "apb_pclk";
+ #clock-cells = <1>;
+ clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
+ };
+
+ aaci@040000 {
+ compatible = "arm,pl041", "arm,primecell";
+ reg = <0x040000 0x1000>;
+ interrupts = <11>;
+ clocks = <&v2m_clk24mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ mmci@050000 {
+ compatible = "arm,pl180", "arm,primecell";
+ reg = <0x050000 0x1000>;
+ interrupts = <9 10>;
+ cd-gpios = <&v2m_sysreg 0 0>;
+ wp-gpios = <&v2m_sysreg 1 0>;
+ max-frequency = <12000000>;
+ vmmc-supply = <&v2m_fixed_3v3>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "mclk", "apb_pclk";
+ };
+
+ kmi@060000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x060000 0x1000>;
+ interrupts = <12>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ kmi@070000 {
+ compatible = "arm,pl050", "arm,primecell";
+ reg = <0x070000 0x1000>;
+ interrupts = <13>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "KMIREFCLK", "apb_pclk";
+ };
+
+ v2m_serial0: uart@090000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x090000 0x1000>;
+ interrupts = <5>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial1: uart@0a0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0a0000 0x1000>;
+ interrupts = <6>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial2: uart@0b0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0b0000 0x1000>;
+ interrupts = <7>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ v2m_serial3: uart@0c0000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x0c0000 0x1000>;
+ interrupts = <8>;
+ clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
+ clock-names = "uartclk", "apb_pclk";
+ };
+
+ wdt@0f0000 {
+ compatible = "arm,sp805", "arm,primecell";
+ reg = <0x0f0000 0x1000>;
+ interrupts = <0>;
+ clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>;
+ clock-names = "wdogclk", "apb_pclk";
+ };
+
+ v2m_timer01: timer@110000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x110000 0x1000>;
+ interrupts = <2>;
+ clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
+
+ v2m_timer23: timer@120000 {
+ compatible = "arm,sp804", "arm,primecell";
+ reg = <0x120000 0x1000>;
+ interrupts = <3>;
+ clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>;
+ clock-names = "timclken1", "timclken2", "apb_pclk";
+ };
+
+ rtc@170000 {
+ compatible = "arm,pl031", "arm,primecell";
+ reg = <0x170000 0x1000>;
+ interrupts = <4>;
+ clocks = <&v2m_clk24mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ clcd@1f0000 {
+ compatible = "arm,pl111", "arm,primecell";
+ reg = <0x1f0000 0x1000>;
+ interrupt-names = "combined";
+ interrupts = <14>;
+ clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>;
+ clock-names = "clcdclk", "apb_pclk";
+ arm,pl11x,framebuffer = <0x18000000 0x00180000>;
+ memory-region = <&v2m_video_ram>;
+ max-memory-bandwidth = <130000000>; /* 16bpp @ 63.5MHz */
+
+ port {
+ v2m_clcd_pads: endpoint {
+ remote-endpoint = <&v2m_clcd_panel>;
+ arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
+ };
+ };
+
+ panel {
+ compatible = "panel-dpi";
+
+ port {
+ v2m_clcd_panel: endpoint {
+ remote-endpoint = <&v2m_clcd_pads>;
+ };
+ };
+
+ panel-timing {
+ clock-frequency = <63500127>;
+ hactive = <1024>;
+ hback-porch = <152>;
+ hfront-porch = <48>;
+ hsync-len = <104>;
+ vactive = <768>;
+ vback-porch = <23>;
+ vfront-porch = <3>;
+ vsync-len = <4>;
+ };
+ };
+ };
+
+ virtio_block@0130000 {
+ compatible = "virtio,mmio";
+ reg = <0x130000 0x200>;
+ interrupts = <42>;
+ };
+ };
+
+ v2m_fixed_3v3: fixedregulator@0 {
+ compatible = "regulator-fixed";
+ regulator-name = "3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ mcc {
+ compatible = "arm,vexpress,config-bus";
+ arm,vexpress,config-bridge = <&v2m_sysreg>;
+
+ v2m_oscclk1: osc@1 {
+ /* CLCD clock */
+ compatible = "arm,vexpress-osc";
+ arm,vexpress-sysreg,func = <1 1>;
+ freq-range = <23750000 63500000>;
+ #clock-cells = <0>;
+ clock-output-names = "v2m:oscclk1";
+ };
+
+ reset@0 {
+ compatible = "arm,vexpress-reset";
+ arm,vexpress-sysreg,func = <5 0>;
+ };
+
+ muxfpga@0 {
+ compatible = "arm,vexpress-muxfpga";
+ arm,vexpress-sysreg,func = <7 0>;
+ };
+
+ shutdown@0 {
+ compatible = "arm,vexpress-shutdown";
+ arm,vexpress-sysreg,func = <8 0>;
+ };
+
+ reboot@0 {
+ compatible = "arm,vexpress-reboot";
+ arm,vexpress-sysreg,func = <9 0>;
+ };
+
+ dvimode@0 {
+ compatible = "arm,vexpress-dvimode";
+ arm,vexpress-sysreg,func = <11 0>;
+ };
+ };
+ };
--- /dev/null
+dtb-$(CONFIG_ARCH_THUNDER) += thunder-88xx.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
--- /dev/null
+/*
+ * Cavium Thunder DTS file - Thunder board description
+ *
+ * Copyright (C) 2014, Cavium Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/dts-v1/;
+
+/include/ "thunder-88xx.dtsi"
+
+/ {
+ model = "Cavium ThunderX CN88XX board";
+ compatible = "cavium,thunder-88xx";
+
+ aliases {
+ serial0 = &uaa0;
+ serial1 = &uaa1;
+ };
+
+ memory@00000000 {
+ device_type = "memory";
+ reg = <0x0 0x00000000 0x0 0x80000000>;
+ };
+};
--- /dev/null
+/*
+ * Cavium Thunder DTS file - Thunder SoC description
+ *
+ * Copyright (C) 2014, Cavium Inc.
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this library; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+/ {
+ compatible = "cavium,thunder-88xx";
+ interrupt-parent = <&gic0>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu@000 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x000>;
+ enable-method = "psci";
+ };
+ cpu@001 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x001>;
+ enable-method = "psci";
+ };
+ cpu@002 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x002>;
+ enable-method = "psci";
+ };
+ cpu@003 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x003>;
+ enable-method = "psci";
+ };
+ cpu@004 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x004>;
+ enable-method = "psci";
+ };
+ cpu@005 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x005>;
+ enable-method = "psci";
+ };
+ cpu@006 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x006>;
+ enable-method = "psci";
+ };
+ cpu@007 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x007>;
+ enable-method = "psci";
+ };
+ cpu@008 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x008>;
+ enable-method = "psci";
+ };
+ cpu@009 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x009>;
+ enable-method = "psci";
+ };
+ cpu@00a {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x00a>;
+ enable-method = "psci";
+ };
+ cpu@00b {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x00b>;
+ enable-method = "psci";
+ };
+ cpu@00c {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x00c>;
+ enable-method = "psci";
+ };
+ cpu@00d {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x00d>;
+ enable-method = "psci";
+ };
+ cpu@00e {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x00e>;
+ enable-method = "psci";
+ };
+ cpu@00f {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x00f>;
+ enable-method = "psci";
+ };
+ cpu@100 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x100>;
+ enable-method = "psci";
+ };
+ cpu@101 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x101>;
+ enable-method = "psci";
+ };
+ cpu@102 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x102>;
+ enable-method = "psci";
+ };
+ cpu@103 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x103>;
+ enable-method = "psci";
+ };
+ cpu@104 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x104>;
+ enable-method = "psci";
+ };
+ cpu@105 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x105>;
+ enable-method = "psci";
+ };
+ cpu@106 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x106>;
+ enable-method = "psci";
+ };
+ cpu@107 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x107>;
+ enable-method = "psci";
+ };
+ cpu@108 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x108>;
+ enable-method = "psci";
+ };
+ cpu@109 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x109>;
+ enable-method = "psci";
+ };
+ cpu@10a {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x10a>;
+ enable-method = "psci";
+ };
+ cpu@10b {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x10b>;
+ enable-method = "psci";
+ };
+ cpu@10c {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x10c>;
+ enable-method = "psci";
+ };
+ cpu@10d {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x10d>;
+ enable-method = "psci";
+ };
+ cpu@10e {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x10e>;
+ enable-method = "psci";
+ };
+ cpu@10f {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x10f>;
+ enable-method = "psci";
+ };
+ cpu@200 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x200>;
+ enable-method = "psci";
+ };
+ cpu@201 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x201>;
+ enable-method = "psci";
+ };
+ cpu@202 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x202>;
+ enable-method = "psci";
+ };
+ cpu@203 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x203>;
+ enable-method = "psci";
+ };
+ cpu@204 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x204>;
+ enable-method = "psci";
+ };
+ cpu@205 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x205>;
+ enable-method = "psci";
+ };
+ cpu@206 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x206>;
+ enable-method = "psci";
+ };
+ cpu@207 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x207>;
+ enable-method = "psci";
+ };
+ cpu@208 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x208>;
+ enable-method = "psci";
+ };
+ cpu@209 {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x209>;
+ enable-method = "psci";
+ };
+ cpu@20a {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x20a>;
+ enable-method = "psci";
+ };
+ cpu@20b {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x20b>;
+ enable-method = "psci";
+ };
+ cpu@20c {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x20c>;
+ enable-method = "psci";
+ };
+ cpu@20d {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x20d>;
+ enable-method = "psci";
+ };
+ cpu@20e {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x20e>;
+ enable-method = "psci";
+ };
+ cpu@20f {
+ device_type = "cpu";
+ compatible = "cavium,thunder", "arm,armv8";
+ reg = <0x0 0x20f>;
+ enable-method = "psci";
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <1 13 0xff01>,
+ <1 14 0xff01>,
+ <1 11 0xff01>,
+ <1 10 0xff01>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ refclk50mhz: refclk50mhz {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ clock-output-names = "refclk50mhz";
+ };
+
+ gic0: interrupt-controller@8010,00000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <3>;
+ interrupt-controller;
+ reg = <0x8010 0x00000000 0x0 0x010000>, /* GICD */
+ <0x8010 0x80000000 0x0 0x600000>; /* GICR */
+ interrupts = <1 9 0xf04>;
+ };
+
+ uaa0: serial@87e0,24000000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x87e0 0x24000000 0x0 0x1000>;
+ interrupts = <1 21 4>;
+ clocks = <&refclk50mhz>;
+ clock-names = "apb_pclk";
+ };
+
+ uaa1: serial@87e0,25000000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x87e0 0x25000000 0x0 0x1000>;
+ interrupts = <1 22 4>;
+ clocks = <&refclk50mhz>;
+ clock-names = "apb_pclk";
+ };
+ };
+};
+++ /dev/null
-/*
- * ARM Ltd.
- *
- * ARMv8 Foundation model DTS
- */
-
-/dts-v1/;
-
-/memreserve/ 0x80000000 0x00010000;
-
-/ {
- model = "Foundation-v8A";
- compatible = "arm,foundation-aarch64", "arm,vexpress";
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- chosen { };
-
- aliases {
- serial0 = &v2m_serial0;
- serial1 = &v2m_serial1;
- serial2 = &v2m_serial2;
- serial3 = &v2m_serial3;
- };
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "arm,armv8";
- reg = <0x0 0x0>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
- };
- cpu@1 {
- device_type = "cpu";
- compatible = "arm,armv8";
- reg = <0x0 0x1>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
- };
- cpu@2 {
- device_type = "cpu";
- compatible = "arm,armv8";
- reg = <0x0 0x2>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
- };
- cpu@3 {
- device_type = "cpu";
- compatible = "arm,armv8";
- reg = <0x0 0x3>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
- };
- };
-
- memory@80000000 {
- device_type = "memory";
- reg = <0x00000000 0x80000000 0 0x80000000>,
- <0x00000008 0x80000000 0 0x80000000>;
- };
-
- gic: interrupt-controller@2c001000 {
- compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0x0 0x2c001000 0 0x1000>,
- <0x0 0x2c002000 0 0x1000>,
- <0x0 0x2c004000 0 0x2000>,
- <0x0 0x2c006000 0 0x2000>;
- interrupts = <1 9 0xf04>;
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <1 13 0xff01>,
- <1 14 0xff01>,
- <1 11 0xff01>,
- <1 10 0xff01>;
- clock-frequency = <100000000>;
- };
-
- pmu {
- compatible = "arm,armv8-pmuv3";
- interrupts = <0 60 4>,
- <0 61 4>,
- <0 62 4>,
- <0 63 4>;
- };
-
- smb {
- compatible = "arm,vexpress,v2m-p1", "simple-bus";
- arm,v2m-memory-map = "rs1";
- #address-cells = <2>; /* SMB chipselect number and offset */
- #size-cells = <1>;
-
- ranges = <0 0 0 0x08000000 0x04000000>,
- <1 0 0 0x14000000 0x04000000>,
- <2 0 0 0x18000000 0x04000000>,
- <3 0 0 0x1c000000 0x04000000>,
- <4 0 0 0x0c000000 0x04000000>,
- <5 0 0 0x10000000 0x04000000>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 63>;
- interrupt-map = <0 0 0 &gic 0 0 4>,
- <0 0 1 &gic 0 1 4>,
- <0 0 2 &gic 0 2 4>,
- <0 0 3 &gic 0 3 4>,
- <0 0 4 &gic 0 4 4>,
- <0 0 5 &gic 0 5 4>,
- <0 0 6 &gic 0 6 4>,
- <0 0 7 &gic 0 7 4>,
- <0 0 8 &gic 0 8 4>,
- <0 0 9 &gic 0 9 4>,
- <0 0 10 &gic 0 10 4>,
- <0 0 11 &gic 0 11 4>,
- <0 0 12 &gic 0 12 4>,
- <0 0 13 &gic 0 13 4>,
- <0 0 14 &gic 0 14 4>,
- <0 0 15 &gic 0 15 4>,
- <0 0 16 &gic 0 16 4>,
- <0 0 17 &gic 0 17 4>,
- <0 0 18 &gic 0 18 4>,
- <0 0 19 &gic 0 19 4>,
- <0 0 20 &gic 0 20 4>,
- <0 0 21 &gic 0 21 4>,
- <0 0 22 &gic 0 22 4>,
- <0 0 23 &gic 0 23 4>,
- <0 0 24 &gic 0 24 4>,
- <0 0 25 &gic 0 25 4>,
- <0 0 26 &gic 0 26 4>,
- <0 0 27 &gic 0 27 4>,
- <0 0 28 &gic 0 28 4>,
- <0 0 29 &gic 0 29 4>,
- <0 0 30 &gic 0 30 4>,
- <0 0 31 &gic 0 31 4>,
- <0 0 32 &gic 0 32 4>,
- <0 0 33 &gic 0 33 4>,
- <0 0 34 &gic 0 34 4>,
- <0 0 35 &gic 0 35 4>,
- <0 0 36 &gic 0 36 4>,
- <0 0 37 &gic 0 37 4>,
- <0 0 38 &gic 0 38 4>,
- <0 0 39 &gic 0 39 4>,
- <0 0 40 &gic 0 40 4>,
- <0 0 41 &gic 0 41 4>,
- <0 0 42 &gic 0 42 4>;
-
- ethernet@2,02000000 {
- compatible = "smsc,lan91c111";
- reg = <2 0x02000000 0x10000>;
- interrupts = <15>;
- };
-
- v2m_clk24mhz: clk24mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- clock-output-names = "v2m:clk24mhz";
- };
-
- v2m_refclk1mhz: refclk1mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <1000000>;
- clock-output-names = "v2m:refclk1mhz";
- };
-
- v2m_refclk32khz: refclk32khz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "v2m:refclk32khz";
- };
-
- iofpga@3,00000000 {
- compatible = "arm,amba-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 3 0 0x200000>;
-
- v2m_sysreg: sysreg@010000 {
- compatible = "arm,vexpress-sysreg";
- reg = <0x010000 0x1000>;
- };
-
- v2m_serial0: uart@090000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x090000 0x1000>;
- interrupts = <5>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- v2m_serial1: uart@0a0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0a0000 0x1000>;
- interrupts = <6>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- v2m_serial2: uart@0b0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0b0000 0x1000>;
- interrupts = <7>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- v2m_serial3: uart@0c0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0c0000 0x1000>;
- interrupts = <8>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- virtio_block@0130000 {
- compatible = "virtio,mmio";
- reg = <0x130000 0x200>;
- interrupts = <42>;
- };
- };
- };
-};
--- /dev/null
+../../../../../include/dt-bindings
\ No newline at end of file
+++ /dev/null
-/*
- * ARM Ltd. Fast Models
- *
- * Architecture Envelope Model (AEM) ARMv8-A
- * ARMAEMv8AMPCT
- *
- * RTSM_VE_AEMv8A.lisa
- */
-
-/dts-v1/;
-
-/memreserve/ 0x80000000 0x00010000;
-
-/ {
- model = "RTSM_VE_AEMv8A";
- compatible = "arm,rtsm_ve,aemv8a", "arm,vexpress";
- interrupt-parent = <&gic>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- chosen { };
-
- aliases {
- serial0 = &v2m_serial0;
- serial1 = &v2m_serial1;
- serial2 = &v2m_serial2;
- serial3 = &v2m_serial3;
- };
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- cpu@0 {
- device_type = "cpu";
- compatible = "arm,armv8";
- reg = <0x0 0x0>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
- };
- cpu@1 {
- device_type = "cpu";
- compatible = "arm,armv8";
- reg = <0x0 0x1>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
- };
- cpu@2 {
- device_type = "cpu";
- compatible = "arm,armv8";
- reg = <0x0 0x2>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
- };
- cpu@3 {
- device_type = "cpu";
- compatible = "arm,armv8";
- reg = <0x0 0x3>;
- enable-method = "spin-table";
- cpu-release-addr = <0x0 0x8000fff8>;
- };
- };
-
- memory@80000000 {
- device_type = "memory";
- reg = <0x00000000 0x80000000 0 0x80000000>,
- <0x00000008 0x80000000 0 0x80000000>;
- };
-
- gic: interrupt-controller@2c001000 {
- compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
- #interrupt-cells = <3>;
- #address-cells = <0>;
- interrupt-controller;
- reg = <0x0 0x2c001000 0 0x1000>,
- <0x0 0x2c002000 0 0x1000>,
- <0x0 0x2c004000 0 0x2000>,
- <0x0 0x2c006000 0 0x2000>;
- interrupts = <1 9 0xf04>;
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <1 13 0xff01>,
- <1 14 0xff01>,
- <1 11 0xff01>,
- <1 10 0xff01>;
- clock-frequency = <100000000>;
- };
-
- pmu {
- compatible = "arm,armv8-pmuv3";
- interrupts = <0 60 4>,
- <0 61 4>,
- <0 62 4>,
- <0 63 4>;
- };
-
- smb {
- compatible = "simple-bus";
-
- #address-cells = <2>;
- #size-cells = <1>;
- ranges = <0 0 0 0x08000000 0x04000000>,
- <1 0 0 0x14000000 0x04000000>,
- <2 0 0 0x18000000 0x04000000>,
- <3 0 0 0x1c000000 0x04000000>,
- <4 0 0 0x0c000000 0x04000000>,
- <5 0 0 0x10000000 0x04000000>;
-
- #interrupt-cells = <1>;
- interrupt-map-mask = <0 0 63>;
- interrupt-map = <0 0 0 &gic 0 0 4>,
- <0 0 1 &gic 0 1 4>,
- <0 0 2 &gic 0 2 4>,
- <0 0 3 &gic 0 3 4>,
- <0 0 4 &gic 0 4 4>,
- <0 0 5 &gic 0 5 4>,
- <0 0 6 &gic 0 6 4>,
- <0 0 7 &gic 0 7 4>,
- <0 0 8 &gic 0 8 4>,
- <0 0 9 &gic 0 9 4>,
- <0 0 10 &gic 0 10 4>,
- <0 0 11 &gic 0 11 4>,
- <0 0 12 &gic 0 12 4>,
- <0 0 13 &gic 0 13 4>,
- <0 0 14 &gic 0 14 4>,
- <0 0 15 &gic 0 15 4>,
- <0 0 16 &gic 0 16 4>,
- <0 0 17 &gic 0 17 4>,
- <0 0 18 &gic 0 18 4>,
- <0 0 19 &gic 0 19 4>,
- <0 0 20 &gic 0 20 4>,
- <0 0 21 &gic 0 21 4>,
- <0 0 22 &gic 0 22 4>,
- <0 0 23 &gic 0 23 4>,
- <0 0 24 &gic 0 24 4>,
- <0 0 25 &gic 0 25 4>,
- <0 0 26 &gic 0 26 4>,
- <0 0 27 &gic 0 27 4>,
- <0 0 28 &gic 0 28 4>,
- <0 0 29 &gic 0 29 4>,
- <0 0 30 &gic 0 30 4>,
- <0 0 31 &gic 0 31 4>,
- <0 0 32 &gic 0 32 4>,
- <0 0 33 &gic 0 33 4>,
- <0 0 34 &gic 0 34 4>,
- <0 0 35 &gic 0 35 4>,
- <0 0 36 &gic 0 36 4>,
- <0 0 37 &gic 0 37 4>,
- <0 0 38 &gic 0 38 4>,
- <0 0 39 &gic 0 39 4>,
- <0 0 40 &gic 0 40 4>,
- <0 0 41 &gic 0 41 4>,
- <0 0 42 &gic 0 42 4>;
-
- /include/ "rtsm_ve-motherboard.dtsi"
- };
-};
+++ /dev/null
-/*
- * ARM Ltd. Fast Models
- *
- * Versatile Express (VE) system model
- * Motherboard component
- *
- * VEMotherBoard.lisa
- */
-
- motherboard {
- arm,v2m-memory-map = "rs1";
- compatible = "arm,vexpress,v2m-p1", "simple-bus";
- #address-cells = <2>; /* SMB chipselect number and offset */
- #size-cells = <1>;
- #interrupt-cells = <1>;
- ranges;
-
- flash@0,00000000 {
- compatible = "arm,vexpress-flash", "cfi-flash";
- reg = <0 0x00000000 0x04000000>,
- <4 0x00000000 0x04000000>;
- bank-width = <4>;
- };
-
- vram@2,00000000 {
- compatible = "arm,vexpress-vram";
- reg = <2 0x00000000 0x00800000>;
- };
-
- ethernet@2,02000000 {
- compatible = "smsc,lan91c111";
- reg = <2 0x02000000 0x10000>;
- interrupts = <15>;
- };
-
- v2m_clk24mhz: clk24mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <24000000>;
- clock-output-names = "v2m:clk24mhz";
- };
-
- v2m_refclk1mhz: refclk1mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <1000000>;
- clock-output-names = "v2m:refclk1mhz";
- };
-
- v2m_refclk32khz: refclk32khz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- clock-output-names = "v2m:refclk32khz";
- };
-
- iofpga@3,00000000 {
- compatible = "arm,amba-bus", "simple-bus";
- #address-cells = <1>;
- #size-cells = <1>;
- ranges = <0 3 0 0x200000>;
-
- v2m_sysreg: sysreg@010000 {
- compatible = "arm,vexpress-sysreg";
- reg = <0x010000 0x1000>;
- gpio-controller;
- #gpio-cells = <2>;
- };
-
- v2m_sysctl: sysctl@020000 {
- compatible = "arm,sp810", "arm,primecell";
- reg = <0x020000 0x1000>;
- clocks = <&v2m_refclk32khz>, <&v2m_refclk1mhz>, <&v2m_clk24mhz>;
- clock-names = "refclk", "timclk", "apb_pclk";
- #clock-cells = <1>;
- clock-output-names = "timerclken0", "timerclken1", "timerclken2", "timerclken3";
- };
-
- aaci@040000 {
- compatible = "arm,pl041", "arm,primecell";
- reg = <0x040000 0x1000>;
- interrupts = <11>;
- clocks = <&v2m_clk24mhz>;
- clock-names = "apb_pclk";
- };
-
- mmci@050000 {
- compatible = "arm,pl180", "arm,primecell";
- reg = <0x050000 0x1000>;
- interrupts = <9 10>;
- cd-gpios = <&v2m_sysreg 0 0>;
- wp-gpios = <&v2m_sysreg 1 0>;
- max-frequency = <12000000>;
- vmmc-supply = <&v2m_fixed_3v3>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "mclk", "apb_pclk";
- };
-
- kmi@060000 {
- compatible = "arm,pl050", "arm,primecell";
- reg = <0x060000 0x1000>;
- interrupts = <12>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "KMIREFCLK", "apb_pclk";
- };
-
- kmi@070000 {
- compatible = "arm,pl050", "arm,primecell";
- reg = <0x070000 0x1000>;
- interrupts = <13>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "KMIREFCLK", "apb_pclk";
- };
-
- v2m_serial0: uart@090000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x090000 0x1000>;
- interrupts = <5>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- v2m_serial1: uart@0a0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0a0000 0x1000>;
- interrupts = <6>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- v2m_serial2: uart@0b0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0b0000 0x1000>;
- interrupts = <7>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- v2m_serial3: uart@0c0000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x0c0000 0x1000>;
- interrupts = <8>;
- clocks = <&v2m_clk24mhz>, <&v2m_clk24mhz>;
- clock-names = "uartclk", "apb_pclk";
- };
-
- wdt@0f0000 {
- compatible = "arm,sp805", "arm,primecell";
- reg = <0x0f0000 0x1000>;
- interrupts = <0>;
- clocks = <&v2m_refclk32khz>, <&v2m_clk24mhz>;
- clock-names = "wdogclk", "apb_pclk";
- };
-
- v2m_timer01: timer@110000 {
- compatible = "arm,sp804", "arm,primecell";
- reg = <0x110000 0x1000>;
- interrupts = <2>;
- clocks = <&v2m_sysctl 0>, <&v2m_sysctl 1>, <&v2m_clk24mhz>;
- clock-names = "timclken1", "timclken2", "apb_pclk";
- };
-
- v2m_timer23: timer@120000 {
- compatible = "arm,sp804", "arm,primecell";
- reg = <0x120000 0x1000>;
- interrupts = <3>;
- clocks = <&v2m_sysctl 2>, <&v2m_sysctl 3>, <&v2m_clk24mhz>;
- clock-names = "timclken1", "timclken2", "apb_pclk";
- };
-
- rtc@170000 {
- compatible = "arm,pl031", "arm,primecell";
- reg = <0x170000 0x1000>;
- interrupts = <4>;
- clocks = <&v2m_clk24mhz>;
- clock-names = "apb_pclk";
- };
-
- clcd@1f0000 {
- compatible = "arm,pl111", "arm,primecell";
- reg = <0x1f0000 0x1000>;
- interrupts = <14>;
- clocks = <&v2m_oscclk1>, <&v2m_clk24mhz>;
- clock-names = "clcdclk", "apb_pclk";
- };
-
- virtio_block@0130000 {
- compatible = "virtio,mmio";
- reg = <0x130000 0x200>;
- interrupts = <42>;
- };
- };
-
- v2m_fixed_3v3: fixedregulator@0 {
- compatible = "regulator-fixed";
- regulator-name = "3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- regulator-always-on;
- };
-
- mcc {
- compatible = "arm,vexpress,config-bus";
- arm,vexpress,config-bridge = <&v2m_sysreg>;
-
- v2m_oscclk1: osc@1 {
- /* CLCD clock */
- compatible = "arm,vexpress-osc";
- arm,vexpress-sysreg,func = <1 1>;
- freq-range = <23750000 63500000>;
- #clock-cells = <0>;
- clock-output-names = "v2m:oscclk1";
- };
-
- reset@0 {
- compatible = "arm,vexpress-reset";
- arm,vexpress-sysreg,func = <5 0>;
- };
-
- muxfpga@0 {
- compatible = "arm,vexpress-muxfpga";
- arm,vexpress-sysreg,func = <7 0>;
- };
-
- shutdown@0 {
- compatible = "arm,vexpress-shutdown";
- arm,vexpress-sysreg,func = <8 0>;
- };
-
- reboot@0 {
- compatible = "arm,vexpress-reboot";
- arm,vexpress-sysreg,func = <9 0>;
- };
-
- dvimode@0 {
- compatible = "arm,vexpress-dvimode";
- arm,vexpress-sysreg,func = <11 0>;
- };
- };
- };
+++ /dev/null
-/*
- * Cavium Thunder DTS file - Thunder board description
- *
- * Copyright (C) 2014, Cavium Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-
-/include/ "thunder-88xx.dtsi"
-
-/ {
- model = "Cavium ThunderX CN88XX board";
- compatible = "cavium,thunder-88xx";
-
- aliases {
- serial0 = &uaa0;
- serial1 = &uaa1;
- };
-
- memory@00000000 {
- device_type = "memory";
- reg = <0x0 0x00000000 0x0 0x80000000>;
- };
-};
+++ /dev/null
-/*
- * Cavium Thunder DTS file - Thunder SoC description
- *
- * Copyright (C) 2014, Cavium Inc.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- * a) This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of the
- * License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public
- * License along with this library; if not, write to the Free
- * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
- * MA 02110-1301 USA
- *
- * Or, alternatively,
- *
- * b) Permission is hereby granted, free of charge, to any person
- * obtaining a copy of this software and associated documentation
- * files (the "Software"), to deal in the Software without
- * restriction, including without limitation the rights to use,
- * copy, modify, merge, publish, distribute, sublicense, and/or
- * sell copies of the Software, and to permit persons to whom the
- * Software is furnished to do so, subject to the following
- * conditions:
- *
- * The above copyright notice and this permission notice shall be
- * included in all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- * OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/ {
- compatible = "cavium,thunder-88xx";
- interrupt-parent = <&gic0>;
- #address-cells = <2>;
- #size-cells = <2>;
-
- psci {
- compatible = "arm,psci-0.2";
- method = "smc";
- };
-
- cpus {
- #address-cells = <2>;
- #size-cells = <0>;
-
- cpu@000 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x000>;
- enable-method = "psci";
- };
- cpu@001 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x001>;
- enable-method = "psci";
- };
- cpu@002 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x002>;
- enable-method = "psci";
- };
- cpu@003 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x003>;
- enable-method = "psci";
- };
- cpu@004 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x004>;
- enable-method = "psci";
- };
- cpu@005 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x005>;
- enable-method = "psci";
- };
- cpu@006 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x006>;
- enable-method = "psci";
- };
- cpu@007 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x007>;
- enable-method = "psci";
- };
- cpu@008 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x008>;
- enable-method = "psci";
- };
- cpu@009 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x009>;
- enable-method = "psci";
- };
- cpu@00a {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x00a>;
- enable-method = "psci";
- };
- cpu@00b {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x00b>;
- enable-method = "psci";
- };
- cpu@00c {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x00c>;
- enable-method = "psci";
- };
- cpu@00d {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x00d>;
- enable-method = "psci";
- };
- cpu@00e {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x00e>;
- enable-method = "psci";
- };
- cpu@00f {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x00f>;
- enable-method = "psci";
- };
- cpu@100 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x100>;
- enable-method = "psci";
- };
- cpu@101 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x101>;
- enable-method = "psci";
- };
- cpu@102 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x102>;
- enable-method = "psci";
- };
- cpu@103 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x103>;
- enable-method = "psci";
- };
- cpu@104 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x104>;
- enable-method = "psci";
- };
- cpu@105 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x105>;
- enable-method = "psci";
- };
- cpu@106 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x106>;
- enable-method = "psci";
- };
- cpu@107 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x107>;
- enable-method = "psci";
- };
- cpu@108 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x108>;
- enable-method = "psci";
- };
- cpu@109 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x109>;
- enable-method = "psci";
- };
- cpu@10a {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x10a>;
- enable-method = "psci";
- };
- cpu@10b {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x10b>;
- enable-method = "psci";
- };
- cpu@10c {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x10c>;
- enable-method = "psci";
- };
- cpu@10d {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x10d>;
- enable-method = "psci";
- };
- cpu@10e {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x10e>;
- enable-method = "psci";
- };
- cpu@10f {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x10f>;
- enable-method = "psci";
- };
- cpu@200 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x200>;
- enable-method = "psci";
- };
- cpu@201 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x201>;
- enable-method = "psci";
- };
- cpu@202 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x202>;
- enable-method = "psci";
- };
- cpu@203 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x203>;
- enable-method = "psci";
- };
- cpu@204 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x204>;
- enable-method = "psci";
- };
- cpu@205 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x205>;
- enable-method = "psci";
- };
- cpu@206 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x206>;
- enable-method = "psci";
- };
- cpu@207 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x207>;
- enable-method = "psci";
- };
- cpu@208 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x208>;
- enable-method = "psci";
- };
- cpu@209 {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x209>;
- enable-method = "psci";
- };
- cpu@20a {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x20a>;
- enable-method = "psci";
- };
- cpu@20b {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x20b>;
- enable-method = "psci";
- };
- cpu@20c {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x20c>;
- enable-method = "psci";
- };
- cpu@20d {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x20d>;
- enable-method = "psci";
- };
- cpu@20e {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x20e>;
- enable-method = "psci";
- };
- cpu@20f {
- device_type = "cpu";
- compatible = "cavium,thunder", "arm,armv8";
- reg = <0x0 0x20f>;
- enable-method = "psci";
- };
- };
-
- timer {
- compatible = "arm,armv8-timer";
- interrupts = <1 13 0xff01>,
- <1 14 0xff01>,
- <1 11 0xff01>,
- <1 10 0xff01>;
- };
-
- soc {
- compatible = "simple-bus";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
-
- refclk50mhz: refclk50mhz {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-frequency = <50000000>;
- clock-output-names = "refclk50mhz";
- };
-
- gic0: interrupt-controller@8010,00000000 {
- compatible = "arm,gic-v3";
- #interrupt-cells = <3>;
- interrupt-controller;
- reg = <0x8010 0x00000000 0x0 0x010000>, /* GICD */
- <0x8010 0x80000000 0x0 0x600000>; /* GICR */
- interrupts = <1 9 0xf04>;
- };
-
- uaa0: serial@87e0,24000000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x87e0 0x24000000 0x0 0x1000>;
- interrupts = <1 21 4>;
- clocks = <&refclk50mhz>;
- clock-names = "apb_pclk";
- };
-
- uaa1: serial@87e0,25000000 {
- compatible = "arm,pl011", "arm,primecell";
- reg = <0x87e0 0x25000000 0x0 0x1000>;
- interrupts = <1 22 4>;
- clocks = <&refclk50mhz>;
- clock-names = "apb_pclk";
- };
- };
-};
CONFIG_ARCH_THUNDER=y
CONFIG_ARCH_VEXPRESS=y
CONFIG_ARCH_XGENE=y
+CONFIG_PCI=y
+CONFIG_PCI_MSI=y
+CONFIG_PCI_XGENE=y
CONFIG_SMP=y
CONFIG_PREEMPT=y
CONFIG_KSM=y
CONFIG_IP_PNP_BOOTP=y
# CONFIG_INET_LRO is not set
# CONFIG_IPV6 is not set
+CONFIG_BPF_JIT=y
# CONFIG_WIRELESS is not set
CONFIG_NET_9P=y
CONFIG_NET_9P_VIRTIO=y
CONFIG_BLK_DEV_SD=y
# CONFIG_SCSI_LOWLEVEL is not set
CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_AHCI_PLATFORM=y
CONFIG_AHCI_XGENE=y
-CONFIG_PHY_XGENE=y
CONFIG_PATA_PLATFORM=y
CONFIG_PATA_OF_PLATFORM=y
CONFIG_NETDEVICES=y
CONFIG_TUN=y
CONFIG_VIRTIO_NET=y
+CONFIG_NET_XGENE=y
CONFIG_SMC91X=y
CONFIG_SMSC911X=y
-CONFIG_NET_XGENE=y
# CONFIG_WLAN is not set
CONFIG_INPUT_EVDEV=y
# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_AMBAKMI=y
CONFIG_LEGACY_PTY_COUNT=16
CONFIG_SERIAL_8250=y
CONFIG_SERIAL_8250_CONSOLE=y
CONFIG_SERIAL_OF_PLATFORM=y
CONFIG_VIRTIO_CONSOLE=y
# CONFIG_HW_RANDOM is not set
+# CONFIG_HMC_DRV is not set
+CONFIG_SPI=y
+CONFIG_SPI_PL022=y
+CONFIG_GPIO_PL061=y
+CONFIG_GPIO_XGENE=y
# CONFIG_HWMON is not set
CONFIG_REGULATOR=y
CONFIG_REGULATOR_FIXED_VOLTAGE=y
CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
CONFIG_FRAMEBUFFER_CONSOLE=y
CONFIG_LOGO=y
# CONFIG_LOGO_LINUX_MONO is not set
# CONFIG_LOGO_LINUX_VGA16 is not set
CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
CONFIG_USB_ISP1760_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
CONFIG_USB_STORAGE=y
+CONFIG_USB_ULPI=y
CONFIG_MMC=y
CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SPI=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_EFI=y
+CONFIG_RTC_DRV_XGENE=y
CONFIG_VIRTIO_BALLOON=y
CONFIG_VIRTIO_MMIO=y
# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PHY_XGENE=y
CONFIG_EXT2_FS=y
CONFIG_EXT3_FS=y
# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
tristate "AES core cipher using ARMv8 Crypto Extensions"
depends on ARM64 && KERNEL_MODE_NEON
select CRYPTO_ALGAPI
- select CRYPTO_AES
config CRYPTO_AES_ARM64_CE_CCM
tristate "AES in CCM mode using ARMv8 Crypto Extensions"
depends on ARM64 && KERNEL_MODE_NEON
select CRYPTO_ALGAPI
- select CRYPTO_AES
+ select CRYPTO_AES_ARM64_CE
select CRYPTO_AEAD
config CRYPTO_AES_ARM64_CE_BLK
tristate "AES in ECB/CBC/CTR/XTS modes using ARMv8 Crypto Extensions"
depends on ARM64 && KERNEL_MODE_NEON
select CRYPTO_BLKCIPHER
- select CRYPTO_AES
+ select CRYPTO_AES_ARM64_CE
select CRYPTO_ABLK_HELPER
config CRYPTO_AES_ARM64_NEON_BLK
#include <linux/crypto.h>
#include <linux/module.h>
+#include "aes-ce-setkey.h"
+
static int num_rounds(struct crypto_aes_ctx *ctx)
{
/*
struct crypto_aes_ctx *ctx = crypto_aead_ctx(tfm);
int ret;
- ret = crypto_aes_expand_key(ctx, in_key, key_len);
+ ret = ce_aes_expandkey(ctx, in_key, key_len);
if (!ret)
return 0;
#include <linux/crypto.h>
#include <linux/module.h>
+#include "aes-ce-setkey.h"
+
MODULE_DESCRIPTION("Synchronous AES cipher using ARMv8 Crypto Extensions");
MODULE_AUTHOR("Ard Biesheuvel <ard.biesheuvel@linaro.org>");
MODULE_LICENSE("GPL v2");
kernel_neon_end();
}
+/*
+ * aes_sub() - use the aese instruction to perform the AES sbox substitution
+ * on each byte in 'input'
+ */
+static u32 aes_sub(u32 input)
+{
+ u32 ret;
+
+ __asm__("dup v1.4s, %w[in] ;"
+ "movi v0.16b, #0 ;"
+ "aese v0.16b, v1.16b ;"
+ "umov %w[out], v0.4s[0] ;"
+
+ : [out] "=r"(ret)
+ : [in] "r"(input)
+ : "v0","v1");
+
+ return ret;
+}
+
+int ce_aes_expandkey(struct crypto_aes_ctx *ctx, const u8 *in_key,
+ unsigned int key_len)
+{
+ /*
+ * The AES key schedule round constants
+ */
+ static u8 const rcon[] = {
+ 0x01, 0x02, 0x04, 0x08, 0x10, 0x20, 0x40, 0x80, 0x1b, 0x36,
+ };
+
+ u32 kwords = key_len / sizeof(u32);
+ struct aes_block *key_enc, *key_dec;
+ int i, j;
+
+ if (key_len != AES_KEYSIZE_128 &&
+ key_len != AES_KEYSIZE_192 &&
+ key_len != AES_KEYSIZE_256)
+ return -EINVAL;
+
+ memcpy(ctx->key_enc, in_key, key_len);
+ ctx->key_length = key_len;
+
+ kernel_neon_begin_partial(2);
+ for (i = 0; i < sizeof(rcon); i++) {
+ u32 *rki = ctx->key_enc + (i * kwords);
+ u32 *rko = rki + kwords;
+
+ rko[0] = ror32(aes_sub(rki[kwords - 1]), 8) ^ rcon[i] ^ rki[0];
+ rko[1] = rko[0] ^ rki[1];
+ rko[2] = rko[1] ^ rki[2];
+ rko[3] = rko[2] ^ rki[3];
+
+ if (key_len == AES_KEYSIZE_192) {
+ if (i >= 7)
+ break;
+ rko[4] = rko[3] ^ rki[4];
+ rko[5] = rko[4] ^ rki[5];
+ } else if (key_len == AES_KEYSIZE_256) {
+ if (i >= 6)
+ break;
+ rko[4] = aes_sub(rko[3]) ^ rki[4];
+ rko[5] = rko[4] ^ rki[5];
+ rko[6] = rko[5] ^ rki[6];
+ rko[7] = rko[6] ^ rki[7];
+ }
+ }
+
+ /*
+ * Generate the decryption keys for the Equivalent Inverse Cipher.
+ * This involves reversing the order of the round keys, and applying
+ * the Inverse Mix Columns transformation on all but the first and
+ * the last one.
+ */
+ key_enc = (struct aes_block *)ctx->key_enc;
+ key_dec = (struct aes_block *)ctx->key_dec;
+ j = num_rounds(ctx);
+
+ key_dec[0] = key_enc[j];
+ for (i = 1, j--; j > 0; i++, j--)
+ __asm__("ld1 {v0.16b}, %[in] ;"
+ "aesimc v1.16b, v0.16b ;"
+ "st1 {v1.16b}, %[out] ;"
+
+ : [out] "=Q"(key_dec[i])
+ : [in] "Q"(key_enc[j])
+ : "v0","v1");
+ key_dec[i] = key_enc[0];
+
+ kernel_neon_end();
+ return 0;
+}
+EXPORT_SYMBOL(ce_aes_expandkey);
+
+int ce_aes_setkey(struct crypto_tfm *tfm, const u8 *in_key,
+ unsigned int key_len)
+{
+ struct crypto_aes_ctx *ctx = crypto_tfm_ctx(tfm);
+ int ret;
+
+ ret = ce_aes_expandkey(ctx, in_key, key_len);
+ if (!ret)
+ return 0;
+
+ tfm->crt_flags |= CRYPTO_TFM_RES_BAD_KEY_LEN;
+ return -EINVAL;
+}
+EXPORT_SYMBOL(ce_aes_setkey);
+
static struct crypto_alg aes_alg = {
.cra_name = "aes",
.cra_driver_name = "aes-ce",
.cra_cipher = {
.cia_min_keysize = AES_MIN_KEY_SIZE,
.cia_max_keysize = AES_MAX_KEY_SIZE,
- .cia_setkey = crypto_aes_set_key,
+ .cia_setkey = ce_aes_setkey,
.cia_encrypt = aes_cipher_encrypt,
.cia_decrypt = aes_cipher_decrypt
}
--- /dev/null
+
+int ce_aes_setkey(struct crypto_tfm *tfm, const u8 *in_key,
+ unsigned int key_len);
+int ce_aes_expandkey(struct crypto_aes_ctx *ctx, const u8 *in_key,
+ unsigned int key_len);
#include <linux/module.h>
#include <linux/cpufeature.h>
+#include "aes-ce-setkey.h"
+
#ifdef USE_V8_CRYPTO_EXTENSIONS
#define MODE "ce"
#define PRIO 300
+#define aes_setkey ce_aes_setkey
+#define aes_expandkey ce_aes_expandkey
#define aes_ecb_encrypt ce_aes_ecb_encrypt
#define aes_ecb_decrypt ce_aes_ecb_decrypt
#define aes_cbc_encrypt ce_aes_cbc_encrypt
#else
#define MODE "neon"
#define PRIO 200
+#define aes_setkey crypto_aes_set_key
+#define aes_expandkey crypto_aes_expand_key
#define aes_ecb_encrypt neon_aes_ecb_encrypt
#define aes_ecb_decrypt neon_aes_ecb_decrypt
#define aes_cbc_encrypt neon_aes_cbc_encrypt
struct crypto_aes_xts_ctx *ctx = crypto_tfm_ctx(tfm);
int ret;
- ret = crypto_aes_expand_key(&ctx->key1, in_key, key_len / 2);
+ ret = aes_expandkey(&ctx->key1, in_key, key_len / 2);
if (!ret)
- ret = crypto_aes_expand_key(&ctx->key2, &in_key[key_len / 2],
- key_len / 2);
+ ret = aes_expandkey(&ctx->key2, &in_key[key_len / 2],
+ key_len / 2);
if (!ret)
return 0;
.min_keysize = AES_MIN_KEY_SIZE,
.max_keysize = AES_MAX_KEY_SIZE,
.ivsize = AES_BLOCK_SIZE,
- .setkey = crypto_aes_set_key,
+ .setkey = aes_setkey,
.encrypt = ecb_encrypt,
.decrypt = ecb_decrypt,
},
.min_keysize = AES_MIN_KEY_SIZE,
.max_keysize = AES_MAX_KEY_SIZE,
.ivsize = AES_BLOCK_SIZE,
- .setkey = crypto_aes_set_key,
+ .setkey = aes_setkey,
.encrypt = cbc_encrypt,
.decrypt = cbc_decrypt,
},
.min_keysize = AES_MIN_KEY_SIZE,
.max_keysize = AES_MAX_KEY_SIZE,
.ivsize = AES_BLOCK_SIZE,
- .setkey = crypto_aes_set_key,
+ .setkey = aes_setkey,
.encrypt = ctr_encrypt,
.decrypt = ctr_encrypt,
},
--- /dev/null
+#ifndef __ASM_ALTERNATIVE_ASM_H
+#define __ASM_ALTERNATIVE_ASM_H
+
+#ifdef __ASSEMBLY__
+
+.macro altinstruction_entry orig_offset alt_offset feature orig_len alt_len
+ .word \orig_offset - .
+ .word \alt_offset - .
+ .hword \feature
+ .byte \orig_len
+ .byte \alt_len
+.endm
+
+.macro alternative_insn insn1 insn2 cap
+661: \insn1
+662: .pushsection .altinstructions, "a"
+ altinstruction_entry 661b, 663f, \cap, 662b-661b, 664f-663f
+ .popsection
+ .pushsection .altinstr_replacement, "ax"
+663: \insn2
+664: .popsection
+ .if ((664b-663b) != (662b-661b))
+ .error "Alternatives instruction length mismatch"
+ .endif
+.endm
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* __ASM_ALTERNATIVE_ASM_H */
--- /dev/null
+#ifndef __ASM_ALTERNATIVE_H
+#define __ASM_ALTERNATIVE_H
+
+#include <linux/types.h>
+#include <linux/stddef.h>
+#include <linux/stringify.h>
+
+struct alt_instr {
+ s32 orig_offset; /* offset to original instruction */
+ s32 alt_offset; /* offset to replacement instruction */
+ u16 cpufeature; /* cpufeature bit set for replacement */
+ u8 orig_len; /* size of original instruction(s) */
+ u8 alt_len; /* size of new instruction(s), <= orig_len */
+};
+
+void apply_alternatives_all(void);
+void apply_alternatives(void *start, size_t length);
+void free_alternatives_memory(void);
+
+#define ALTINSTR_ENTRY(feature) \
+ " .word 661b - .\n" /* label */ \
+ " .word 663f - .\n" /* new instruction */ \
+ " .hword " __stringify(feature) "\n" /* feature bit */ \
+ " .byte 662b-661b\n" /* source len */ \
+ " .byte 664f-663f\n" /* replacement len */
+
+/* alternative assembly primitive: */
+#define ALTERNATIVE(oldinstr, newinstr, feature) \
+ "661:\n\t" \
+ oldinstr "\n" \
+ "662:\n" \
+ ".pushsection .altinstructions,\"a\"\n" \
+ ALTINSTR_ENTRY(feature) \
+ ".popsection\n" \
+ ".pushsection .altinstr_replacement, \"a\"\n" \
+ "663:\n\t" \
+ newinstr "\n" \
+ "664:\n\t" \
+ ".popsection\n\t" \
+ ".if ((664b-663b) != (662b-661b))\n\t" \
+ " .error \"Alternatives instruction length mismatch\"\n\t"\
+ ".endif\n"
+
+#endif /* __ASM_ALTERNATIVE_H */
asm volatile("msr cntkctl_el1, %0" : : "r" (cntkctl));
}
+static inline u64 arch_counter_get_cntpct(void)
+{
+ /*
+ * AArch64 kernel and user space mandate the use of CNTVCT.
+ */
+ BUG();
+ return 0;
+}
+
static inline u64 arch_counter_get_cntvct(void)
{
u64 cval;
#ifndef __ASSEMBLY__
+#define __read_mostly __attribute__((__section__(".data..read_mostly")))
+
static inline int cache_line_size(void)
{
u32 cwg = cache_type_cwg();
extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned long end);
extern void flush_icache_range(unsigned long start, unsigned long end);
extern void __flush_dcache_area(void *addr, size_t len);
-extern void __flush_cache_user_range(unsigned long start, unsigned long end);
+extern long __flush_cache_user_range(unsigned long start, unsigned long end);
static inline void flush_cache_mm(struct mm_struct *mm)
{
#define __ASM_CMPXCHG_H
#include <linux/bug.h>
+#include <linux/mmdebug.h>
#include <asm/barrier.h>
return oldval;
}
+#define system_has_cmpxchg_double() 1
+
+static inline int __cmpxchg_double(volatile void *ptr1, volatile void *ptr2,
+ unsigned long old1, unsigned long old2,
+ unsigned long new1, unsigned long new2, int size)
+{
+ unsigned long loop, lost;
+
+ switch (size) {
+ case 8:
+ VM_BUG_ON((unsigned long *)ptr2 - (unsigned long *)ptr1 != 1);
+ do {
+ asm volatile("// __cmpxchg_double8\n"
+ " ldxp %0, %1, %2\n"
+ " eor %0, %0, %3\n"
+ " eor %1, %1, %4\n"
+ " orr %1, %0, %1\n"
+ " mov %w0, #0\n"
+ " cbnz %1, 1f\n"
+ " stxp %w0, %5, %6, %2\n"
+ "1:\n"
+ : "=&r"(loop), "=&r"(lost), "+Q" (*(u64 *)ptr1)
+ : "r" (old1), "r"(old2), "r"(new1), "r"(new2));
+ } while (loop);
+ break;
+ default:
+ BUILD_BUG();
+ }
+
+ return !lost;
+}
+
+static inline int __cmpxchg_double_mb(volatile void *ptr1, volatile void *ptr2,
+ unsigned long old1, unsigned long old2,
+ unsigned long new1, unsigned long new2, int size)
+{
+ int ret;
+
+ smp_mb();
+ ret = __cmpxchg_double(ptr1, ptr2, old1, old2, new1, new2, size);
+ smp_mb();
+
+ return ret;
+}
+
static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old,
unsigned long new, int size)
{
__ret; \
})
+#define cmpxchg_double(ptr1, ptr2, o1, o2, n1, n2) \
+({\
+ int __ret;\
+ __ret = __cmpxchg_double_mb((ptr1), (ptr2), (unsigned long)(o1), \
+ (unsigned long)(o2), (unsigned long)(n1), \
+ (unsigned long)(n2), sizeof(*(ptr1)));\
+ __ret; \
+})
+
+#define cmpxchg_double_local(ptr1, ptr2, o1, o2, n1, n2) \
+({\
+ int __ret;\
+ __ret = __cmpxchg_double((ptr1), (ptr2), (unsigned long)(o1), \
+ (unsigned long)(o2), (unsigned long)(n1), \
+ (unsigned long)(n2), sizeof(*(ptr1)));\
+ __ret; \
+})
+
+#define this_cpu_cmpxchg_1(ptr, o, n) cmpxchg_local(raw_cpu_ptr(&(ptr)), o, n)
+#define this_cpu_cmpxchg_2(ptr, o, n) cmpxchg_local(raw_cpu_ptr(&(ptr)), o, n)
+#define this_cpu_cmpxchg_4(ptr, o, n) cmpxchg_local(raw_cpu_ptr(&(ptr)), o, n)
+#define this_cpu_cmpxchg_8(ptr, o, n) cmpxchg_local(raw_cpu_ptr(&(ptr)), o, n)
+
+#define this_cpu_cmpxchg_double_8(ptr1, ptr2, o1, o2, n1, n2) \
+ cmpxchg_double_local(raw_cpu_ptr(&(ptr1)), raw_cpu_ptr(&(ptr2)), \
+ o1, o2, n1, n2)
+
#define cmpxchg64(ptr,o,n) cmpxchg((ptr),(o),(n))
#define cmpxchg64_local(ptr,o,n) cmpxchg_local((ptr),(o),(n))
typedef s32 compat_time_t;
typedef s32 compat_clock_t;
typedef s32 compat_pid_t;
-typedef u32 __compat_uid_t;
-typedef u32 __compat_gid_t;
+typedef u16 __compat_uid_t;
+typedef u16 __compat_gid_t;
typedef u16 __compat_uid16_t;
typedef u16 __compat_gid16_t;
typedef u32 __compat_uid32_t;
compat_long_t _band; /* POLL_IN, POLL_OUT, POLL_MSG */
int _fd;
} _sigpoll;
+
+ /* SIGSYS */
+ struct {
+ compat_uptr_t _call_addr; /* calling user insn */
+ int _syscall; /* triggering system call number */
+ compat_uint_t _arch; /* AUDIT_ARCH_* of syscall */
+ } _sigsys;
} _sifields;
} compat_siginfo_t;
u32 reg_dczid;
u32 reg_midr;
+ u64 reg_id_aa64dfr0;
+ u64 reg_id_aa64dfr1;
u64 reg_id_aa64isar0;
u64 reg_id_aa64isar1;
u64 reg_id_aa64mmfr0;
#define MAX_CPU_FEATURES (8 * sizeof(elf_hwcap))
#define cpu_feature(x) ilog2(HWCAP_ ## x)
+#define ARM64_WORKAROUND_CLEAN_CACHE 0
+#define ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE 1
+
+#define ARM64_NCAPS 2
+
+#ifndef __ASSEMBLY__
+
+extern DECLARE_BITMAP(cpu_hwcaps, ARM64_NCAPS);
+
static inline bool cpu_have_feature(unsigned int num)
{
return elf_hwcap & (1UL << num);
}
+static inline bool cpus_have_cap(unsigned int num)
+{
+ if (num >= ARM64_NCAPS)
+ return false;
+ return test_bit(num, cpu_hwcaps);
+}
+
+static inline void cpus_set_cap(unsigned int num)
+{
+ if (num >= ARM64_NCAPS)
+ pr_warn("Attempt to set an illegal CPU capability (%d >= %d)\n",
+ num, ARM64_NCAPS);
+ else
+ __set_bit(num, cpu_hwcaps);
+}
+
+void check_local_cpu_errata(void);
+
+#endif /* __ASSEMBLY__ */
+
#endif
#define MIDR_IMPLEMENTOR(midr) \
(((midr) & MIDR_IMPLEMENTOR_MASK) >> MIDR_IMPLEMENTOR_SHIFT)
+#define MIDR_CPU_PART(imp, partnum) \
+ (((imp) << MIDR_IMPLEMENTOR_SHIFT) | \
+ (0xf << MIDR_ARCHITECTURE_SHIFT) | \
+ ((partnum) << MIDR_PARTNUM_SHIFT))
+
#define ARM_CPU_IMP_ARM 0x41
#define ARM_CPU_IMP_APM 0x50
--- /dev/null
+/*
+ * arch/arm64/include/asm/dmi.h
+ *
+ * Copyright (C) 2013 Linaro Limited.
+ * Written by: Yi Li (yi.li@linaro.org)
+ *
+ * based on arch/ia64/include/asm/dmi.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ASM_DMI_H
+#define __ASM_DMI_H
+
+#include <linux/io.h>
+#include <linux/slab.h>
+
+/*
+ * According to section 2.3.6 of the UEFI spec, the firmware should not
+ * request a virtual mapping for configuration tables such as SMBIOS.
+ * This means we have to map them before use.
+ */
+#define dmi_early_remap(x, l) ioremap_cache(x, l)
+#define dmi_early_unmap(x, l) iounmap(x)
+#define dmi_remap(x, l) ioremap_cache(x, l)
+#define dmi_unmap(x) iounmap(x)
+#define dmi_alloc(l) kzalloc(l, GFP_KERNEL)
+
+#endif
* that it will "exec", and that there is sufficient room for the brk.
*/
extern unsigned long randomize_et_dyn(unsigned long base);
-#define ELF_ET_DYN_BASE (randomize_et_dyn(2 * TASK_SIZE_64 / 3))
+#define ELF_ET_DYN_BASE (2 * TASK_SIZE_64 / 3)
/*
* When the program starts, a1 contains a pointer to a function to be
#define COMPAT_ELF_PLATFORM ("v8l")
#endif
-#define COMPAT_ELF_ET_DYN_BASE (randomize_et_dyn(2 * TASK_SIZE_32 / 3))
+#define COMPAT_ELF_ET_DYN_BASE (2 * TASK_SIZE_32 / 3)
/* AArch32 registers. */
#define COMPAT_ELF_NGREG 18
*
*/
enum fixed_addresses {
+ FIX_HOLE,
FIX_EARLYCON_MEM_BASE,
__end_of_permanent_fixed_addresses,
#define FIXMAP_PAGE_IO __pgprot(PROT_DEVICE_nGnRE)
-extern void __early_set_fixmap(enum fixed_addresses idx,
- phys_addr_t phys, pgprot_t flags);
+void __init early_fixmap_init(void);
-#define __set_fixmap __early_set_fixmap
+#define __early_set_fixmap __set_fixmap
+
+extern void __set_fixmap(enum fixed_addresses idx, phys_addr_t phys, pgprot_t prot);
#include <asm-generic/fixmap.h>
#define COMPAT_HWCAP_IDIVA (1 << 17)
#define COMPAT_HWCAP_IDIVT (1 << 18)
#define COMPAT_HWCAP_IDIV (COMPAT_HWCAP_IDIVA|COMPAT_HWCAP_IDIVT)
+#define COMPAT_HWCAP_LPAE (1 << 20)
#define COMPAT_HWCAP_EVTSTRM (1 << 21)
#define COMPAT_HWCAP2_AES (1 << 0)
int aarch64_insn_patch_text_nosync(void *addr, u32 insn);
int aarch64_insn_patch_text_sync(void *addrs[], u32 insns[], int cnt);
int aarch64_insn_patch_text(void *addrs[], u32 insns[], int cnt);
+
+bool aarch32_insn_is_wide(u32 insn);
+
+#define A32_RN_OFFSET 16
+#define A32_RT_OFFSET 12
+#define A32_RT2_OFFSET 0
+
+u32 aarch32_insn_extract_reg_num(u32 insn, int offset);
+u32 aarch32_insn_mcr_extract_opc2(u32 insn);
+u32 aarch32_insn_mcr_extract_crm(u32 insn);
#endif /* __ASSEMBLY__ */
#endif /* __ASM_INSN_H */
#include <asm/barrier.h>
#include <asm/pgtable.h>
#include <asm/early_ioremap.h>
+#include <asm/alternative.h>
+#include <asm/cpufeature.h>
#include <xen/xen.h>
/*
* Generic IO read/write. These perform native-endian accesses.
*/
+#define __raw_writeb __raw_writeb
static inline void __raw_writeb(u8 val, volatile void __iomem *addr)
{
asm volatile("strb %w0, [%1]" : : "r" (val), "r" (addr));
}
+#define __raw_writew __raw_writew
static inline void __raw_writew(u16 val, volatile void __iomem *addr)
{
asm volatile("strh %w0, [%1]" : : "r" (val), "r" (addr));
}
+#define __raw_writel __raw_writel
static inline void __raw_writel(u32 val, volatile void __iomem *addr)
{
asm volatile("str %w0, [%1]" : : "r" (val), "r" (addr));
}
+#define __raw_writeq __raw_writeq
static inline void __raw_writeq(u64 val, volatile void __iomem *addr)
{
asm volatile("str %0, [%1]" : : "r" (val), "r" (addr));
}
+#define __raw_readb __raw_readb
static inline u8 __raw_readb(const volatile void __iomem *addr)
{
u8 val;
- asm volatile("ldrb %w0, [%1]" : "=r" (val) : "r" (addr));
+ asm volatile(ALTERNATIVE("ldrb %w0, [%1]",
+ "ldarb %w0, [%1]",
+ ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE)
+ : "=r" (val) : "r" (addr));
return val;
}
+#define __raw_readw __raw_readw
static inline u16 __raw_readw(const volatile void __iomem *addr)
{
u16 val;
- asm volatile("ldrh %w0, [%1]" : "=r" (val) : "r" (addr));
+
+ asm volatile(ALTERNATIVE("ldrh %w0, [%1]",
+ "ldarh %w0, [%1]",
+ ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE)
+ : "=r" (val) : "r" (addr));
return val;
}
+#define __raw_readl __raw_readl
static inline u32 __raw_readl(const volatile void __iomem *addr)
{
u32 val;
- asm volatile("ldr %w0, [%1]" : "=r" (val) : "r" (addr));
+ asm volatile(ALTERNATIVE("ldr %w0, [%1]",
+ "ldar %w0, [%1]",
+ ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE)
+ : "=r" (val) : "r" (addr));
return val;
}
+#define __raw_readq __raw_readq
static inline u64 __raw_readq(const volatile void __iomem *addr)
{
u64 val;
- asm volatile("ldr %0, [%1]" : "=r" (val) : "r" (addr));
+ asm volatile(ALTERNATIVE("ldr %0, [%1]",
+ "ldar %0, [%1]",
+ ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE)
+ : "=r" (val) : "r" (addr));
return val;
}
#define IO_SPACE_LIMIT (SZ_32M - 1)
#define PCI_IOBASE ((void __iomem *)(MODULES_VADDR - SZ_32M))
-static inline u8 inb(unsigned long addr)
-{
- return readb(addr + PCI_IOBASE);
-}
-
-static inline u16 inw(unsigned long addr)
-{
- return readw(addr + PCI_IOBASE);
-}
-
-static inline u32 inl(unsigned long addr)
-{
- return readl(addr + PCI_IOBASE);
-}
-
-static inline void outb(u8 b, unsigned long addr)
-{
- writeb(b, addr + PCI_IOBASE);
-}
-
-static inline void outw(u16 b, unsigned long addr)
-{
- writew(b, addr + PCI_IOBASE);
-}
-
-static inline void outl(u32 b, unsigned long addr)
-{
- writel(b, addr + PCI_IOBASE);
-}
-
-#define inb_p(addr) inb(addr)
-#define inw_p(addr) inw(addr)
-#define inl_p(addr) inl(addr)
-
-#define outb_p(x, addr) outb((x), (addr))
-#define outw_p(x, addr) outw((x), (addr))
-#define outl_p(x, addr) outl((x), (addr))
-
-static inline void insb(unsigned long addr, void *buffer, int count)
-{
- u8 *buf = buffer;
- while (count--)
- *buf++ = __raw_readb(addr + PCI_IOBASE);
-}
-
-static inline void insw(unsigned long addr, void *buffer, int count)
-{
- u16 *buf = buffer;
- while (count--)
- *buf++ = __raw_readw(addr + PCI_IOBASE);
-}
-
-static inline void insl(unsigned long addr, void *buffer, int count)
-{
- u32 *buf = buffer;
- while (count--)
- *buf++ = __raw_readl(addr + PCI_IOBASE);
-}
-
-static inline void outsb(unsigned long addr, const void *buffer, int count)
-{
- const u8 *buf = buffer;
- while (count--)
- __raw_writeb(*buf++, addr + PCI_IOBASE);
-}
-
-static inline void outsw(unsigned long addr, const void *buffer, int count)
-{
- const u16 *buf = buffer;
- while (count--)
- __raw_writew(*buf++, addr + PCI_IOBASE);
-}
-
-static inline void outsl(unsigned long addr, const void *buffer, int count)
-{
- const u32 *buf = buffer;
- while (count--)
- __raw_writel(*buf++, addr + PCI_IOBASE);
-}
-
-#define insb_p(port,to,len) insb(port,to,len)
-#define insw_p(port,to,len) insw(port,to,len)
-#define insl_p(port,to,len) insl(port,to,len)
-
-#define outsb_p(port,from,len) outsb(port,from,len)
-#define outsw_p(port,from,len) outsw(port,from,len)
-#define outsl_p(port,from,len) outsl(port,from,len)
-
/*
* String version of I/O memory access operations.
*/
#define ioremap_wc(addr, size) __ioremap((addr), (size), __pgprot(PROT_NORMAL_NC))
#define iounmap __iounmap
-#define ARCH_HAS_IOREMAP_WC
-#include <asm-generic/iomap.h>
-
/*
- * More restrictive address range checking than the default implementation
- * (PHYS_OFFSET and PHYS_MASK taken into account).
+ * io{read,write}{16,32}be() macros
*/
-#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
-extern int valid_phys_addr_range(phys_addr_t addr, size_t size);
-extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
+#define ioread16be(p) ({ __u16 __v = be16_to_cpu((__force __be16)__raw_readw(p)); __iormb(); __v; })
+#define ioread32be(p) ({ __u32 __v = be32_to_cpu((__force __be32)__raw_readl(p)); __iormb(); __v; })
-extern int devmem_is_allowed(unsigned long pfn);
+#define iowrite16be(v,p) ({ __iowmb(); __raw_writew((__force __u16)cpu_to_be16(v), p); })
+#define iowrite32be(v,p) ({ __iowmb(); __raw_writel((__force __u32)cpu_to_be32(v), p); })
/*
* Convert a physical pointer to a virtual kernel pointer for /dev/mem
*/
#define xlate_dev_kmem_ptr(p) p
+#include <asm-generic/io.h>
+
+/*
+ * More restrictive address range checking than the default implementation
+ * (PHYS_OFFSET and PHYS_MASK taken into account).
+ */
+#define ARCH_HAS_VALID_PHYS_ADDR_RANGE
+extern int valid_phys_addr_range(phys_addr_t addr, size_t size);
+extern int valid_mmap_phys_addr_range(unsigned long pfn, size_t size);
+
+extern int devmem_is_allowed(unsigned long pfn);
+
struct bio_vec;
extern bool xen_biovec_phys_mergeable(const struct bio_vec *vec1,
const struct bio_vec *vec2);
#include <asm-generic/irq.h>
-extern void (*handle_arch_irq)(struct pt_regs *);
+struct pt_regs;
+
extern void migrate_irqs(void);
extern void set_handle_irq(void (*handle_irq)(struct pt_regs *));
#ifndef __ASM_IRQ_WORK_H
#define __ASM_IRQ_WORK_H
+#ifdef CONFIG_SMP
+
#include <asm/smp.h>
static inline bool arch_irq_work_has_interrupt(void)
return !!__smp_cross_call;
}
+#else
+
+static inline bool arch_irq_work_has_interrupt(void)
+{
+ return false;
+}
+
+#endif
+
#endif /* __ASM_IRQ_WORK_H */
#ifndef __ARM64_KVM_ARM_H__
#define __ARM64_KVM_ARM_H__
+#include <asm/memory.h>
#include <asm/types.h>
/* Hyp Configuration Register (HCR) bits */
#endif
#define VTTBR_BADDR_SHIFT (VTTBR_X - 1)
-#define VTTBR_BADDR_MASK (((1LLU << (PHYS_MASK_SHIFT - VTTBR_X)) - 1) << VTTBR_BADDR_SHIFT)
-#define VTTBR_VMID_SHIFT (48LLU)
-#define VTTBR_VMID_MASK (0xffLLU << VTTBR_VMID_SHIFT)
+#define VTTBR_BADDR_MASK (((UL(1) << (PHYS_MASK_SHIFT - VTTBR_X)) - 1) << VTTBR_BADDR_SHIFT)
+#define VTTBR_VMID_SHIFT (UL(48))
+#define VTTBR_VMID_MASK (UL(0xFF) << VTTBR_VMID_SHIFT)
/* Hyp System Trap Register */
#define HSTR_EL2_TTEE (1 << 16)
/* Exception Syndrome Register (ESR) bits */
#define ESR_EL2_EC_SHIFT (26)
-#define ESR_EL2_EC (0x3fU << ESR_EL2_EC_SHIFT)
-#define ESR_EL2_IL (1U << 25)
+#define ESR_EL2_EC (UL(0x3f) << ESR_EL2_EC_SHIFT)
+#define ESR_EL2_IL (UL(1) << 25)
#define ESR_EL2_ISS (ESR_EL2_IL - 1)
#define ESR_EL2_ISV_SHIFT (24)
-#define ESR_EL2_ISV (1U << ESR_EL2_ISV_SHIFT)
+#define ESR_EL2_ISV (UL(1) << ESR_EL2_ISV_SHIFT)
#define ESR_EL2_SAS_SHIFT (22)
-#define ESR_EL2_SAS (3U << ESR_EL2_SAS_SHIFT)
+#define ESR_EL2_SAS (UL(3) << ESR_EL2_SAS_SHIFT)
#define ESR_EL2_SSE (1 << 21)
#define ESR_EL2_SRT_SHIFT (16)
#define ESR_EL2_SRT_MASK (0x1f << ESR_EL2_SRT_SHIFT)
#define ESR_EL2_FSC_TYPE (0x3c)
#define ESR_EL2_CV_SHIFT (24)
-#define ESR_EL2_CV (1U << ESR_EL2_CV_SHIFT)
+#define ESR_EL2_CV (UL(1) << ESR_EL2_CV_SHIFT)
#define ESR_EL2_COND_SHIFT (20)
-#define ESR_EL2_COND (0xfU << ESR_EL2_COND_SHIFT)
+#define ESR_EL2_COND (UL(0xf) << ESR_EL2_COND_SHIFT)
#define FSC_FAULT (0x04)
#define FSC_PERM (0x0c)
/* Hyp Prefetch Fault Address Register (HPFAR/HDFAR) */
-#define HPFAR_MASK (~0xFUL)
+#define HPFAR_MASK (~UL(0xf))
#define ESR_EL2_EC_UNKNOWN (0x00)
#define ESR_EL2_EC_WFI (0x01)
* translation for translating DMA addresses. Use the driver
* DMA support - see dma-mapping.h.
*/
+#define virt_to_phys virt_to_phys
static inline phys_addr_t virt_to_phys(const volatile void *x)
{
return __virt_to_phys((unsigned long)(x));
}
+#define phys_to_virt phys_to_virt
static inline void *phys_to_virt(phys_addr_t x)
{
return (void *)(__phys_to_virt(x));
* virt_to_page(k) convert a _valid_ virtual address to struct page *
* virt_addr_valid(k) indicates whether a virtual address is valid
*/
-#define ARCH_PFN_OFFSET PHYS_PFN_OFFSET
+#define ARCH_PFN_OFFSET ((unsigned long)PHYS_PFN_OFFSET)
#define virt_to_page(kaddr) pfn_to_page(__pa(kaddr) >> PAGE_SHIFT)
#define virt_addr_valid(kaddr) pfn_valid(__pa(kaddr) >> PAGE_SHIFT)
--- /dev/null
+#include <../../arm/include/asm/opcodes.h>
#endif /* CONFIG_SMP */
+#define PERCPU_OP(op, asm_op) \
+static inline unsigned long __percpu_##op(void *ptr, \
+ unsigned long val, int size) \
+{ \
+ unsigned long loop, ret; \
+ \
+ switch (size) { \
+ case 1: \
+ do { \
+ asm ("//__per_cpu_" #op "_1\n" \
+ "ldxrb %w[ret], %[ptr]\n" \
+ #asm_op " %w[ret], %w[ret], %w[val]\n" \
+ "stxrb %w[loop], %w[ret], %[ptr]\n" \
+ : [loop] "=&r" (loop), [ret] "=&r" (ret), \
+ [ptr] "+Q"(*(u8 *)ptr) \
+ : [val] "Ir" (val)); \
+ } while (loop); \
+ break; \
+ case 2: \
+ do { \
+ asm ("//__per_cpu_" #op "_2\n" \
+ "ldxrh %w[ret], %[ptr]\n" \
+ #asm_op " %w[ret], %w[ret], %w[val]\n" \
+ "stxrh %w[loop], %w[ret], %[ptr]\n" \
+ : [loop] "=&r" (loop), [ret] "=&r" (ret), \
+ [ptr] "+Q"(*(u16 *)ptr) \
+ : [val] "Ir" (val)); \
+ } while (loop); \
+ break; \
+ case 4: \
+ do { \
+ asm ("//__per_cpu_" #op "_4\n" \
+ "ldxr %w[ret], %[ptr]\n" \
+ #asm_op " %w[ret], %w[ret], %w[val]\n" \
+ "stxr %w[loop], %w[ret], %[ptr]\n" \
+ : [loop] "=&r" (loop), [ret] "=&r" (ret), \
+ [ptr] "+Q"(*(u32 *)ptr) \
+ : [val] "Ir" (val)); \
+ } while (loop); \
+ break; \
+ case 8: \
+ do { \
+ asm ("//__per_cpu_" #op "_8\n" \
+ "ldxr %[ret], %[ptr]\n" \
+ #asm_op " %[ret], %[ret], %[val]\n" \
+ "stxr %w[loop], %[ret], %[ptr]\n" \
+ : [loop] "=&r" (loop), [ret] "=&r" (ret), \
+ [ptr] "+Q"(*(u64 *)ptr) \
+ : [val] "Ir" (val)); \
+ } while (loop); \
+ break; \
+ default: \
+ BUILD_BUG(); \
+ } \
+ \
+ return ret; \
+}
+
+PERCPU_OP(add, add)
+PERCPU_OP(and, and)
+PERCPU_OP(or, orr)
+#undef PERCPU_OP
+
+static inline unsigned long __percpu_read(void *ptr, int size)
+{
+ unsigned long ret;
+
+ switch (size) {
+ case 1:
+ ret = ACCESS_ONCE(*(u8 *)ptr);
+ break;
+ case 2:
+ ret = ACCESS_ONCE(*(u16 *)ptr);
+ break;
+ case 4:
+ ret = ACCESS_ONCE(*(u32 *)ptr);
+ break;
+ case 8:
+ ret = ACCESS_ONCE(*(u64 *)ptr);
+ break;
+ default:
+ BUILD_BUG();
+ }
+
+ return ret;
+}
+
+static inline void __percpu_write(void *ptr, unsigned long val, int size)
+{
+ switch (size) {
+ case 1:
+ ACCESS_ONCE(*(u8 *)ptr) = (u8)val;
+ break;
+ case 2:
+ ACCESS_ONCE(*(u16 *)ptr) = (u16)val;
+ break;
+ case 4:
+ ACCESS_ONCE(*(u32 *)ptr) = (u32)val;
+ break;
+ case 8:
+ ACCESS_ONCE(*(u64 *)ptr) = (u64)val;
+ break;
+ default:
+ BUILD_BUG();
+ }
+}
+
+static inline unsigned long __percpu_xchg(void *ptr, unsigned long val,
+ int size)
+{
+ unsigned long ret, loop;
+
+ switch (size) {
+ case 1:
+ do {
+ asm ("//__percpu_xchg_1\n"
+ "ldxrb %w[ret], %[ptr]\n"
+ "stxrb %w[loop], %w[val], %[ptr]\n"
+ : [loop] "=&r"(loop), [ret] "=&r"(ret),
+ [ptr] "+Q"(*(u8 *)ptr)
+ : [val] "r" (val));
+ } while (loop);
+ break;
+ case 2:
+ do {
+ asm ("//__percpu_xchg_2\n"
+ "ldxrh %w[ret], %[ptr]\n"
+ "stxrh %w[loop], %w[val], %[ptr]\n"
+ : [loop] "=&r"(loop), [ret] "=&r"(ret),
+ [ptr] "+Q"(*(u16 *)ptr)
+ : [val] "r" (val));
+ } while (loop);
+ break;
+ case 4:
+ do {
+ asm ("//__percpu_xchg_4\n"
+ "ldxr %w[ret], %[ptr]\n"
+ "stxr %w[loop], %w[val], %[ptr]\n"
+ : [loop] "=&r"(loop), [ret] "=&r"(ret),
+ [ptr] "+Q"(*(u32 *)ptr)
+ : [val] "r" (val));
+ } while (loop);
+ break;
+ case 8:
+ do {
+ asm ("//__percpu_xchg_8\n"
+ "ldxr %[ret], %[ptr]\n"
+ "stxr %w[loop], %[val], %[ptr]\n"
+ : [loop] "=&r"(loop), [ret] "=&r"(ret),
+ [ptr] "+Q"(*(u64 *)ptr)
+ : [val] "r" (val));
+ } while (loop);
+ break;
+ default:
+ BUILD_BUG();
+ }
+
+ return ret;
+}
+
+#define _percpu_add(pcp, val) \
+ __percpu_add(raw_cpu_ptr(&(pcp)), val, sizeof(pcp))
+
+#define _percpu_add_return(pcp, val) (typeof(pcp)) (_percpu_add(pcp, val))
+
+#define _percpu_and(pcp, val) \
+ __percpu_and(raw_cpu_ptr(&(pcp)), val, sizeof(pcp))
+
+#define _percpu_or(pcp, val) \
+ __percpu_or(raw_cpu_ptr(&(pcp)), val, sizeof(pcp))
+
+#define _percpu_read(pcp) (typeof(pcp)) \
+ (__percpu_read(raw_cpu_ptr(&(pcp)), sizeof(pcp)))
+
+#define _percpu_write(pcp, val) \
+ __percpu_write(raw_cpu_ptr(&(pcp)), (unsigned long)(val), sizeof(pcp))
+
+#define _percpu_xchg(pcp, val) (typeof(pcp)) \
+ (__percpu_xchg(raw_cpu_ptr(&(pcp)), (unsigned long)(val), sizeof(pcp)))
+
+#define this_cpu_add_1(pcp, val) _percpu_add(pcp, val)
+#define this_cpu_add_2(pcp, val) _percpu_add(pcp, val)
+#define this_cpu_add_4(pcp, val) _percpu_add(pcp, val)
+#define this_cpu_add_8(pcp, val) _percpu_add(pcp, val)
+
+#define this_cpu_add_return_1(pcp, val) _percpu_add_return(pcp, val)
+#define this_cpu_add_return_2(pcp, val) _percpu_add_return(pcp, val)
+#define this_cpu_add_return_4(pcp, val) _percpu_add_return(pcp, val)
+#define this_cpu_add_return_8(pcp, val) _percpu_add_return(pcp, val)
+
+#define this_cpu_and_1(pcp, val) _percpu_and(pcp, val)
+#define this_cpu_and_2(pcp, val) _percpu_and(pcp, val)
+#define this_cpu_and_4(pcp, val) _percpu_and(pcp, val)
+#define this_cpu_and_8(pcp, val) _percpu_and(pcp, val)
+
+#define this_cpu_or_1(pcp, val) _percpu_or(pcp, val)
+#define this_cpu_or_2(pcp, val) _percpu_or(pcp, val)
+#define this_cpu_or_4(pcp, val) _percpu_or(pcp, val)
+#define this_cpu_or_8(pcp, val) _percpu_or(pcp, val)
+
+#define this_cpu_read_1(pcp) _percpu_read(pcp)
+#define this_cpu_read_2(pcp) _percpu_read(pcp)
+#define this_cpu_read_4(pcp) _percpu_read(pcp)
+#define this_cpu_read_8(pcp) _percpu_read(pcp)
+
+#define this_cpu_write_1(pcp, val) _percpu_write(pcp, val)
+#define this_cpu_write_2(pcp, val) _percpu_write(pcp, val)
+#define this_cpu_write_4(pcp, val) _percpu_write(pcp, val)
+#define this_cpu_write_8(pcp, val) _percpu_write(pcp, val)
+
+#define this_cpu_xchg_1(pcp, val) _percpu_xchg(pcp, val)
+#define this_cpu_xchg_2(pcp, val) _percpu_xchg(pcp, val)
+#define this_cpu_xchg_4(pcp, val) _percpu_xchg(pcp, val)
+#define this_cpu_xchg_8(pcp, val) _percpu_xchg(pcp, val)
+
#include <asm-generic/percpu.h>
#endif /* __ASM_PERCPU_H */
#define check_pgt_cache() do { } while (0)
+#define PGALLOC_GFP (GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO)
+
#if CONFIG_ARM64_PGTABLE_LEVELS > 2
static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long addr)
{
- return (pmd_t *)get_zeroed_page(GFP_KERNEL | __GFP_REPEAT);
+ return (pmd_t *)__get_free_page(PGALLOC_GFP);
}
static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long addr)
{
- return (pud_t *)get_zeroed_page(GFP_KERNEL | __GFP_REPEAT);
+ return (pud_t *)__get_free_page(PGALLOC_GFP);
}
static inline void pud_free(struct mm_struct *mm, pud_t *pud)
extern pgd_t *pgd_alloc(struct mm_struct *mm);
extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
-#define PGALLOC_GFP (GFP_KERNEL | __GFP_NOTRACK | __GFP_REPEAT | __GFP_ZERO)
-
static inline pte_t *
pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr)
{
--- /dev/null
+/*
+ * arch/arm64/include/asm/seccomp.h
+ *
+ * Copyright (C) 2014 Linaro Limited
+ * Author: AKASHI Takahiro <takahiro.akashi@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASM_SECCOMP_H
+#define _ASM_SECCOMP_H
+
+#include <asm/unistd.h>
+
+#ifdef CONFIG_COMPAT
+#define __NR_seccomp_read_32 __NR_compat_read
+#define __NR_seccomp_write_32 __NR_compat_write
+#define __NR_seccomp_exit_32 __NR_compat_exit
+#define __NR_seccomp_sigreturn_32 __NR_compat_rt_sigreturn
+#endif /* CONFIG_COMPAT */
+
+#include <asm-generic/seccomp.h>
+
+#endif /* _ASM_SECCOMP_H */
#ifndef __ASM_TLB_H
#define __ASM_TLB_H
-#define __tlb_remove_pmd_tlb_entry __tlb_remove_pmd_tlb_entry
-
-#include <asm-generic/tlb.h>
-
#include <linux/pagemap.h>
#include <linux/swap.h>
#define tlb_remove_entry(tlb, entry) tlb_remove_page(tlb, entry)
#endif /* CONFIG_HAVE_RCU_TABLE_FREE */
-/*
- * There's three ways the TLB shootdown code is used:
- * 1. Unmapping a range of vmas. See zap_page_range(), unmap_region().
- * tlb->fullmm = 0, and tlb_start_vma/tlb_end_vma will be called.
- * 2. Unmapping all vmas. See exit_mmap().
- * tlb->fullmm = 1, and tlb_start_vma/tlb_end_vma will be called.
- * Page tables will be freed.
- * 3. Unmapping argument pages. See shift_arg_pages().
- * tlb->fullmm = 0, but tlb_start_vma/tlb_end_vma will not be called.
- */
+#include <asm-generic/tlb.h>
+
static inline void tlb_flush(struct mmu_gather *tlb)
{
if (tlb->fullmm) {
flush_tlb_mm(tlb->mm);
- } else if (tlb->end > 0) {
+ } else {
struct vm_area_struct vma = { .vm_mm = tlb->mm, };
flush_tlb_range(&vma, tlb->start, tlb->end);
- tlb->start = TASK_SIZE;
- tlb->end = 0;
- }
-}
-
-static inline void tlb_add_flush(struct mmu_gather *tlb, unsigned long addr)
-{
- if (!tlb->fullmm) {
- tlb->start = min(tlb->start, addr);
- tlb->end = max(tlb->end, addr + PAGE_SIZE);
- }
-}
-
-/*
- * Memorize the range for the TLB flush.
- */
-static inline void __tlb_remove_tlb_entry(struct mmu_gather *tlb, pte_t *ptep,
- unsigned long addr)
-{
- tlb_add_flush(tlb, addr);
-}
-
-/*
- * In the case of tlb vma handling, we can optimise these away in the
- * case where we're doing a full MM flush. When we're doing a munmap,
- * the vmas are adjusted to only cover the region to be torn down.
- */
-static inline void tlb_start_vma(struct mmu_gather *tlb,
- struct vm_area_struct *vma)
-{
- if (!tlb->fullmm) {
- tlb->start = TASK_SIZE;
- tlb->end = 0;
}
}
-static inline void tlb_end_vma(struct mmu_gather *tlb,
- struct vm_area_struct *vma)
-{
- if (!tlb->fullmm)
- tlb_flush(tlb);
-}
-
static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
unsigned long addr)
{
pgtable_page_dtor(pte);
- tlb_add_flush(tlb, addr);
tlb_remove_entry(tlb, pte);
}
static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmdp,
unsigned long addr)
{
- tlb_add_flush(tlb, addr);
tlb_remove_entry(tlb, virt_to_page(pmdp));
}
#endif
static inline void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pudp,
unsigned long addr)
{
- tlb_add_flush(tlb, addr);
tlb_remove_entry(tlb, virt_to_page(pudp));
}
#endif
-static inline void __tlb_remove_pmd_tlb_entry(struct mmu_gather *tlb, pmd_t *pmdp,
- unsigned long address)
-{
- tlb_add_flush(tlb, address);
-}
-
#endif
#ifndef __ASM_TRAP_H
#define __ASM_TRAP_H
+#include <linux/list.h>
+
+struct pt_regs;
+
+struct undef_hook {
+ struct list_head node;
+ u32 instr_mask;
+ u32 instr_val;
+ u64 pstate_mask;
+ u64 pstate_val;
+ int (*fn)(struct pt_regs *regs, u32 instr);
+};
+
+void register_undef_hook(struct undef_hook *hook);
+void unregister_undef_hook(struct undef_hook *hook);
+
static inline int in_exception_text(unsigned long ptr)
{
extern char __exception_text_start[];
* Compat syscall numbers used by the AArch64 kernel.
*/
#define __NR_compat_restart_syscall 0
+#define __NR_compat_exit 1
+#define __NR_compat_read 3
+#define __NR_compat_write 4
#define __NR_compat_sigreturn 119
#define __NR_compat_rt_sigreturn 173
__SYSCALL(__NR_sched_getattr, sys_sched_getattr)
#define __NR_renameat2 382
__SYSCALL(__NR_renameat2, sys_renameat2)
- /* 383 for seccomp */
+#define __NR_seccomp 383
+__SYSCALL(__NR_seccomp, sys_seccomp)
#define __NR_getrandom 384
__SYSCALL(__NR_getrandom, sys_getrandom)
#define __NR_memfd_create 385
__SYSCALL(__NR_memfd_create, sys_memfd_create)
+#define __NR_bpf 386
+__SYSCALL(__NR_bpf, sys_bpf)
CPPFLAGS_vmlinux.lds := -DTEXT_OFFSET=$(TEXT_OFFSET)
AFLAGS_head.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
CFLAGS_efi-stub.o := -DTEXT_OFFSET=$(TEXT_OFFSET)
+CFLAGS_armv8_deprecated.o := -I$(src)
CFLAGS_REMOVE_ftrace.o = -pg
CFLAGS_REMOVE_insn.o = -pg
entry-fpsimd.o process.o ptrace.o setup.o signal.o \
sys.o stacktrace.o time.o traps.o io.o vdso.o \
hyp-stub.o psci.o cpu_ops.o insn.o return_address.o \
- cpuinfo.o
+ cpuinfo.o cpu_errata.o alternative.o
arm64-obj-$(CONFIG_COMPAT) += sys32.o kuser32.o signal32.o \
- sys_compat.o
+ sys_compat.o \
+ ../../arm/kernel/opcodes.o
arm64-obj-$(CONFIG_FUNCTION_TRACER) += ftrace.o entry-ftrace.o
arm64-obj-$(CONFIG_MODULES) += arm64ksyms.o module.o
arm64-obj-$(CONFIG_SMP) += smp.o smp_spin_table.o topology.o
arm64-obj-$(CONFIG_KGDB) += kgdb.o
arm64-obj-$(CONFIG_EFI) += efi.o efi-stub.o efi-entry.o
arm64-obj-$(CONFIG_PCI) += pci.o
+arm64-obj-$(CONFIG_ARMV8_DEPRECATED) += armv8_deprecated.o
obj-y += $(arm64-obj-y) vdso/
obj-m += $(arm64-obj-m)
--- /dev/null
+/*
+ * alternative runtime patching
+ * inspired by the x86 version
+ *
+ * Copyright (C) 2014 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define pr_fmt(fmt) "alternatives: " fmt
+
+#include <linux/init.h>
+#include <linux/cpu.h>
+#include <asm/cacheflush.h>
+#include <asm/alternative.h>
+#include <asm/cpufeature.h>
+#include <linux/stop_machine.h>
+
+extern struct alt_instr __alt_instructions[], __alt_instructions_end[];
+
+struct alt_region {
+ struct alt_instr *begin;
+ struct alt_instr *end;
+};
+
+static int __apply_alternatives(void *alt_region)
+{
+ struct alt_instr *alt;
+ struct alt_region *region = alt_region;
+ u8 *origptr, *replptr;
+
+ for (alt = region->begin; alt < region->end; alt++) {
+ if (!cpus_have_cap(alt->cpufeature))
+ continue;
+
+ BUG_ON(alt->alt_len > alt->orig_len);
+
+ pr_info_once("patching kernel code\n");
+
+ origptr = (u8 *)&alt->orig_offset + alt->orig_offset;
+ replptr = (u8 *)&alt->alt_offset + alt->alt_offset;
+ memcpy(origptr, replptr, alt->alt_len);
+ flush_icache_range((uintptr_t)origptr,
+ (uintptr_t)(origptr + alt->alt_len));
+ }
+
+ return 0;
+}
+
+void apply_alternatives_all(void)
+{
+ struct alt_region region = {
+ .begin = __alt_instructions,
+ .end = __alt_instructions_end,
+ };
+
+ /* better not try code patching on a live SMP system */
+ stop_machine(__apply_alternatives, ®ion, NULL);
+}
+
+void apply_alternatives(void *start, size_t length)
+{
+ struct alt_region region = {
+ .begin = start,
+ .end = start + length,
+ };
+
+ __apply_alternatives(®ion);
+}
+
+void free_alternatives_memory(void)
+{
+ free_reserved_area(__alt_instructions, __alt_instructions_end,
+ 0, "alternatives");
+}
--- /dev/null
+/*
+ * Copyright (C) 2014 ARM Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/cpu.h>
+#include <linux/init.h>
+#include <linux/list.h>
+#include <linux/perf_event.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/sysctl.h>
+
+#include <asm/insn.h>
+#include <asm/opcodes.h>
+#include <asm/system_misc.h>
+#include <asm/traps.h>
+#include <asm/uaccess.h>
+
+#define CREATE_TRACE_POINTS
+#include "trace-events-emulation.h"
+
+/*
+ * The runtime support for deprecated instruction support can be in one of
+ * following three states -
+ *
+ * 0 = undef
+ * 1 = emulate (software emulation)
+ * 2 = hw (supported in hardware)
+ */
+enum insn_emulation_mode {
+ INSN_UNDEF,
+ INSN_EMULATE,
+ INSN_HW,
+};
+
+enum legacy_insn_status {
+ INSN_DEPRECATED,
+ INSN_OBSOLETE,
+};
+
+struct insn_emulation_ops {
+ const char *name;
+ enum legacy_insn_status status;
+ struct undef_hook *hooks;
+ int (*set_hw_mode)(bool enable);
+};
+
+struct insn_emulation {
+ struct list_head node;
+ struct insn_emulation_ops *ops;
+ int current_mode;
+ int min;
+ int max;
+};
+
+static LIST_HEAD(insn_emulation);
+static int nr_insn_emulated;
+static DEFINE_RAW_SPINLOCK(insn_emulation_lock);
+
+static void register_emulation_hooks(struct insn_emulation_ops *ops)
+{
+ struct undef_hook *hook;
+
+ BUG_ON(!ops->hooks);
+
+ for (hook = ops->hooks; hook->instr_mask; hook++)
+ register_undef_hook(hook);
+
+ pr_notice("Registered %s emulation handler\n", ops->name);
+}
+
+static void remove_emulation_hooks(struct insn_emulation_ops *ops)
+{
+ struct undef_hook *hook;
+
+ BUG_ON(!ops->hooks);
+
+ for (hook = ops->hooks; hook->instr_mask; hook++)
+ unregister_undef_hook(hook);
+
+ pr_notice("Removed %s emulation handler\n", ops->name);
+}
+
+static int update_insn_emulation_mode(struct insn_emulation *insn,
+ enum insn_emulation_mode prev)
+{
+ int ret = 0;
+
+ switch (prev) {
+ case INSN_UNDEF: /* Nothing to be done */
+ break;
+ case INSN_EMULATE:
+ remove_emulation_hooks(insn->ops);
+ break;
+ case INSN_HW:
+ if (insn->ops->set_hw_mode) {
+ insn->ops->set_hw_mode(false);
+ pr_notice("Disabled %s support\n", insn->ops->name);
+ }
+ break;
+ }
+
+ switch (insn->current_mode) {
+ case INSN_UNDEF:
+ break;
+ case INSN_EMULATE:
+ register_emulation_hooks(insn->ops);
+ break;
+ case INSN_HW:
+ if (insn->ops->set_hw_mode && insn->ops->set_hw_mode(true))
+ pr_notice("Enabled %s support\n", insn->ops->name);
+ else
+ ret = -EINVAL;
+ break;
+ }
+
+ return ret;
+}
+
+static void register_insn_emulation(struct insn_emulation_ops *ops)
+{
+ unsigned long flags;
+ struct insn_emulation *insn;
+
+ insn = kzalloc(sizeof(*insn), GFP_KERNEL);
+ insn->ops = ops;
+ insn->min = INSN_UNDEF;
+
+ switch (ops->status) {
+ case INSN_DEPRECATED:
+ insn->current_mode = INSN_EMULATE;
+ insn->max = INSN_HW;
+ break;
+ case INSN_OBSOLETE:
+ insn->current_mode = INSN_UNDEF;
+ insn->max = INSN_EMULATE;
+ break;
+ }
+
+ raw_spin_lock_irqsave(&insn_emulation_lock, flags);
+ list_add(&insn->node, &insn_emulation);
+ nr_insn_emulated++;
+ raw_spin_unlock_irqrestore(&insn_emulation_lock, flags);
+
+ /* Register any handlers if required */
+ update_insn_emulation_mode(insn, INSN_UNDEF);
+}
+
+static int emulation_proc_handler(struct ctl_table *table, int write,
+ void __user *buffer, size_t *lenp,
+ loff_t *ppos)
+{
+ int ret = 0;
+ struct insn_emulation *insn = (struct insn_emulation *) table->data;
+ enum insn_emulation_mode prev_mode = insn->current_mode;
+
+ table->data = &insn->current_mode;
+ ret = proc_dointvec_minmax(table, write, buffer, lenp, ppos);
+
+ if (ret || !write || prev_mode == insn->current_mode)
+ goto ret;
+
+ ret = update_insn_emulation_mode(insn, prev_mode);
+ if (ret) {
+ /* Mode change failed, revert to previous mode. */
+ insn->current_mode = prev_mode;
+ update_insn_emulation_mode(insn, INSN_UNDEF);
+ }
+ret:
+ table->data = insn;
+ return ret;
+}
+
+static struct ctl_table ctl_abi[] = {
+ {
+ .procname = "abi",
+ .mode = 0555,
+ },
+ { }
+};
+
+static void register_insn_emulation_sysctl(struct ctl_table *table)
+{
+ unsigned long flags;
+ int i = 0;
+ struct insn_emulation *insn;
+ struct ctl_table *insns_sysctl, *sysctl;
+
+ insns_sysctl = kzalloc(sizeof(*sysctl) * (nr_insn_emulated + 1),
+ GFP_KERNEL);
+
+ raw_spin_lock_irqsave(&insn_emulation_lock, flags);
+ list_for_each_entry(insn, &insn_emulation, node) {
+ sysctl = &insns_sysctl[i];
+
+ sysctl->mode = 0644;
+ sysctl->maxlen = sizeof(int);
+
+ sysctl->procname = insn->ops->name;
+ sysctl->data = insn;
+ sysctl->extra1 = &insn->min;
+ sysctl->extra2 = &insn->max;
+ sysctl->proc_handler = emulation_proc_handler;
+ i++;
+ }
+ raw_spin_unlock_irqrestore(&insn_emulation_lock, flags);
+
+ table->child = insns_sysctl;
+ register_sysctl_table(table);
+}
+
+/*
+ * Implement emulation of the SWP/SWPB instructions using load-exclusive and
+ * store-exclusive.
+ *
+ * Syntax of SWP{B} instruction: SWP{B}<c> <Rt>, <Rt2>, [<Rn>]
+ * Where: Rt = destination
+ * Rt2 = source
+ * Rn = address
+ */
+
+/*
+ * Error-checking SWP macros implemented using ldxr{b}/stxr{b}
+ */
+#define __user_swpX_asm(data, addr, res, temp, B) \
+ __asm__ __volatile__( \
+ " mov %w2, %w1\n" \
+ "0: ldxr"B" %w1, [%3]\n" \
+ "1: stxr"B" %w0, %w2, [%3]\n" \
+ " cbz %w0, 2f\n" \
+ " mov %w0, %w4\n" \
+ "2:\n" \
+ " .pushsection .fixup,\"ax\"\n" \
+ " .align 2\n" \
+ "3: mov %w0, %w5\n" \
+ " b 2b\n" \
+ " .popsection" \
+ " .pushsection __ex_table,\"a\"\n" \
+ " .align 3\n" \
+ " .quad 0b, 3b\n" \
+ " .quad 1b, 3b\n" \
+ " .popsection" \
+ : "=&r" (res), "+r" (data), "=&r" (temp) \
+ : "r" (addr), "i" (-EAGAIN), "i" (-EFAULT) \
+ : "memory")
+
+#define __user_swp_asm(data, addr, res, temp) \
+ __user_swpX_asm(data, addr, res, temp, "")
+#define __user_swpb_asm(data, addr, res, temp) \
+ __user_swpX_asm(data, addr, res, temp, "b")
+
+/*
+ * Bit 22 of the instruction encoding distinguishes between
+ * the SWP and SWPB variants (bit set means SWPB).
+ */
+#define TYPE_SWPB (1 << 22)
+
+/*
+ * Set up process info to signal segmentation fault - called on access error.
+ */
+static void set_segfault(struct pt_regs *regs, unsigned long addr)
+{
+ siginfo_t info;
+
+ down_read(¤t->mm->mmap_sem);
+ if (find_vma(current->mm, addr) == NULL)
+ info.si_code = SEGV_MAPERR;
+ else
+ info.si_code = SEGV_ACCERR;
+ up_read(¤t->mm->mmap_sem);
+
+ info.si_signo = SIGSEGV;
+ info.si_errno = 0;
+ info.si_addr = (void *) instruction_pointer(regs);
+
+ pr_debug("SWP{B} emulation: access caused memory abort!\n");
+ arm64_notify_die("Illegal memory access", regs, &info, 0);
+}
+
+static int emulate_swpX(unsigned int address, unsigned int *data,
+ unsigned int type)
+{
+ unsigned int res = 0;
+
+ if ((type != TYPE_SWPB) && (address & 0x3)) {
+ /* SWP to unaligned address not permitted */
+ pr_debug("SWP instruction on unaligned pointer!\n");
+ return -EFAULT;
+ }
+
+ while (1) {
+ unsigned long temp;
+
+ if (type == TYPE_SWPB)
+ __user_swpb_asm(*data, address, res, temp);
+ else
+ __user_swp_asm(*data, address, res, temp);
+
+ if (likely(res != -EAGAIN) || signal_pending(current))
+ break;
+
+ cond_resched();
+ }
+
+ return res;
+}
+
+/*
+ * swp_handler logs the id of calling process, dissects the instruction, sanity
+ * checks the memory location, calls emulate_swpX for the actual operation and
+ * deals with fixup/error handling before returning
+ */
+static int swp_handler(struct pt_regs *regs, u32 instr)
+{
+ u32 destreg, data, type, address = 0;
+ int rn, rt2, res = 0;
+
+ perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, regs->pc);
+
+ type = instr & TYPE_SWPB;
+
+ switch (arm_check_condition(instr, regs->pstate)) {
+ case ARM_OPCODE_CONDTEST_PASS:
+ break;
+ case ARM_OPCODE_CONDTEST_FAIL:
+ /* Condition failed - return to next instruction */
+ goto ret;
+ case ARM_OPCODE_CONDTEST_UNCOND:
+ /* If unconditional encoding - not a SWP, undef */
+ return -EFAULT;
+ default:
+ return -EINVAL;
+ }
+
+ rn = aarch32_insn_extract_reg_num(instr, A32_RN_OFFSET);
+ rt2 = aarch32_insn_extract_reg_num(instr, A32_RT2_OFFSET);
+
+ address = (u32)regs->user_regs.regs[rn];
+ data = (u32)regs->user_regs.regs[rt2];
+ destreg = aarch32_insn_extract_reg_num(instr, A32_RT_OFFSET);
+
+ pr_debug("addr in r%d->0x%08x, dest is r%d, source in r%d->0x%08x)\n",
+ rn, address, destreg,
+ aarch32_insn_extract_reg_num(instr, A32_RT2_OFFSET), data);
+
+ /* Check access in reasonable access range for both SWP and SWPB */
+ if (!access_ok(VERIFY_WRITE, (address & ~3), 4)) {
+ pr_debug("SWP{B} emulation: access to 0x%08x not allowed!\n",
+ address);
+ goto fault;
+ }
+
+ res = emulate_swpX(address, &data, type);
+ if (res == -EFAULT)
+ goto fault;
+ else if (res == 0)
+ regs->user_regs.regs[destreg] = data;
+
+ret:
+ if (type == TYPE_SWPB)
+ trace_instruction_emulation("swpb", regs->pc);
+ else
+ trace_instruction_emulation("swp", regs->pc);
+
+ pr_warn_ratelimited("\"%s\" (%ld) uses obsolete SWP{B} instruction at 0x%llx\n",
+ current->comm, (unsigned long)current->pid, regs->pc);
+
+ regs->pc += 4;
+ return 0;
+
+fault:
+ set_segfault(regs, address);
+
+ return 0;
+}
+
+/*
+ * Only emulate SWP/SWPB executed in ARM state/User mode.
+ * The kernel must be SWP free and SWP{B} does not exist in Thumb.
+ */
+static struct undef_hook swp_hooks[] = {
+ {
+ .instr_mask = 0x0fb00ff0,
+ .instr_val = 0x01000090,
+ .pstate_mask = COMPAT_PSR_MODE_MASK,
+ .pstate_val = COMPAT_PSR_MODE_USR,
+ .fn = swp_handler
+ },
+ { }
+};
+
+static struct insn_emulation_ops swp_ops = {
+ .name = "swp",
+ .status = INSN_OBSOLETE,
+ .hooks = swp_hooks,
+ .set_hw_mode = NULL,
+};
+
+static int cp15barrier_handler(struct pt_regs *regs, u32 instr)
+{
+ perf_sw_event(PERF_COUNT_SW_EMULATION_FAULTS, 1, regs, regs->pc);
+
+ switch (arm_check_condition(instr, regs->pstate)) {
+ case ARM_OPCODE_CONDTEST_PASS:
+ break;
+ case ARM_OPCODE_CONDTEST_FAIL:
+ /* Condition failed - return to next instruction */
+ goto ret;
+ case ARM_OPCODE_CONDTEST_UNCOND:
+ /* If unconditional encoding - not a barrier instruction */
+ return -EFAULT;
+ default:
+ return -EINVAL;
+ }
+
+ switch (aarch32_insn_mcr_extract_crm(instr)) {
+ case 10:
+ /*
+ * dmb - mcr p15, 0, Rt, c7, c10, 5
+ * dsb - mcr p15, 0, Rt, c7, c10, 4
+ */
+ if (aarch32_insn_mcr_extract_opc2(instr) == 5) {
+ dmb(sy);
+ trace_instruction_emulation(
+ "mcr p15, 0, Rt, c7, c10, 5 ; dmb", regs->pc);
+ } else {
+ dsb(sy);
+ trace_instruction_emulation(
+ "mcr p15, 0, Rt, c7, c10, 4 ; dsb", regs->pc);
+ }
+ break;
+ case 5:
+ /*
+ * isb - mcr p15, 0, Rt, c7, c5, 4
+ *
+ * Taking an exception or returning from one acts as an
+ * instruction barrier. So no explicit barrier needed here.
+ */
+ trace_instruction_emulation(
+ "mcr p15, 0, Rt, c7, c5, 4 ; isb", regs->pc);
+ break;
+ }
+
+ret:
+ pr_warn_ratelimited("\"%s\" (%ld) uses deprecated CP15 Barrier instruction at 0x%llx\n",
+ current->comm, (unsigned long)current->pid, regs->pc);
+
+ regs->pc += 4;
+ return 0;
+}
+
+#define SCTLR_EL1_CP15BEN (1 << 5)
+
+static inline void config_sctlr_el1(u32 clear, u32 set)
+{
+ u32 val;
+
+ asm volatile("mrs %0, sctlr_el1" : "=r" (val));
+ val &= ~clear;
+ val |= set;
+ asm volatile("msr sctlr_el1, %0" : : "r" (val));
+}
+
+static void enable_cp15_ben(void *info)
+{
+ config_sctlr_el1(0, SCTLR_EL1_CP15BEN);
+}
+
+static void disable_cp15_ben(void *info)
+{
+ config_sctlr_el1(SCTLR_EL1_CP15BEN, 0);
+}
+
+static int cpu_hotplug_notify(struct notifier_block *b,
+ unsigned long action, void *hcpu)
+{
+ switch (action) {
+ case CPU_STARTING:
+ case CPU_STARTING_FROZEN:
+ enable_cp15_ben(NULL);
+ return NOTIFY_DONE;
+ case CPU_DYING:
+ case CPU_DYING_FROZEN:
+ disable_cp15_ben(NULL);
+ return NOTIFY_DONE;
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block cpu_hotplug_notifier = {
+ .notifier_call = cpu_hotplug_notify,
+};
+
+static int cp15_barrier_set_hw_mode(bool enable)
+{
+ if (enable) {
+ register_cpu_notifier(&cpu_hotplug_notifier);
+ on_each_cpu(enable_cp15_ben, NULL, true);
+ } else {
+ unregister_cpu_notifier(&cpu_hotplug_notifier);
+ on_each_cpu(disable_cp15_ben, NULL, true);
+ }
+
+ return true;
+}
+
+static struct undef_hook cp15_barrier_hooks[] = {
+ {
+ .instr_mask = 0x0fff0fdf,
+ .instr_val = 0x0e070f9a,
+ .pstate_mask = COMPAT_PSR_MODE_MASK,
+ .pstate_val = COMPAT_PSR_MODE_USR,
+ .fn = cp15barrier_handler,
+ },
+ {
+ .instr_mask = 0x0fff0fff,
+ .instr_val = 0x0e070f95,
+ .pstate_mask = COMPAT_PSR_MODE_MASK,
+ .pstate_val = COMPAT_PSR_MODE_USR,
+ .fn = cp15barrier_handler,
+ },
+ { }
+};
+
+static struct insn_emulation_ops cp15_barrier_ops = {
+ .name = "cp15_barrier",
+ .status = INSN_DEPRECATED,
+ .hooks = cp15_barrier_hooks,
+ .set_hw_mode = cp15_barrier_set_hw_mode,
+};
+
+/*
+ * Invoked as late_initcall, since not needed before init spawned.
+ */
+static int __init armv8_deprecated_init(void)
+{
+ if (IS_ENABLED(CONFIG_SWP_EMULATION))
+ register_insn_emulation(&swp_ops);
+
+ if (IS_ENABLED(CONFIG_CP15_BARRIER_EMULATION))
+ register_insn_emulation(&cp15_barrier_ops);
+
+ register_insn_emulation_sysctl(ctl_abi);
+
+ return 0;
+}
+
+late_initcall(armv8_deprecated_init);
--- /dev/null
+/*
+ * Contains CPU specific errata definitions
+ *
+ * Copyright (C) 2014 ARM Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define pr_fmt(fmt) "alternatives: " fmt
+
+#include <linux/types.h>
+#include <asm/cpu.h>
+#include <asm/cputype.h>
+#include <asm/cpufeature.h>
+
+#define MIDR_CORTEX_A53 MIDR_CPU_PART(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A53)
+#define MIDR_CORTEX_A57 MIDR_CPU_PART(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A57)
+
+/*
+ * Add a struct or another datatype to the union below if you need
+ * different means to detect an affected CPU.
+ */
+struct arm64_cpu_capabilities {
+ const char *desc;
+ u16 capability;
+ bool (*is_affected)(struct arm64_cpu_capabilities *);
+ union {
+ struct {
+ u32 midr_model;
+ u32 midr_range_min, midr_range_max;
+ };
+ };
+};
+
+#define CPU_MODEL_MASK (MIDR_IMPLEMENTOR_MASK | MIDR_PARTNUM_MASK | \
+ MIDR_ARCHITECTURE_MASK)
+
+static bool __maybe_unused
+is_affected_midr_range(struct arm64_cpu_capabilities *entry)
+{
+ u32 midr = read_cpuid_id();
+
+ if ((midr & CPU_MODEL_MASK) != entry->midr_model)
+ return false;
+
+ midr &= MIDR_REVISION_MASK | MIDR_VARIANT_MASK;
+
+ return (midr >= entry->midr_range_min && midr <= entry->midr_range_max);
+}
+
+#define MIDR_RANGE(model, min, max) \
+ .is_affected = is_affected_midr_range, \
+ .midr_model = model, \
+ .midr_range_min = min, \
+ .midr_range_max = max
+
+struct arm64_cpu_capabilities arm64_errata[] = {
+#if defined(CONFIG_ARM64_ERRATUM_826319) || \
+ defined(CONFIG_ARM64_ERRATUM_827319) || \
+ defined(CONFIG_ARM64_ERRATUM_824069)
+ {
+ /* Cortex-A53 r0p[012] */
+ .desc = "ARM errata 826319, 827319, 824069",
+ .capability = ARM64_WORKAROUND_CLEAN_CACHE,
+ MIDR_RANGE(MIDR_CORTEX_A53, 0x00, 0x02),
+ },
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_819472
+ {
+ /* Cortex-A53 r0p[01] */
+ .desc = "ARM errata 819472",
+ .capability = ARM64_WORKAROUND_CLEAN_CACHE,
+ MIDR_RANGE(MIDR_CORTEX_A53, 0x00, 0x01),
+ },
+#endif
+#ifdef CONFIG_ARM64_ERRATUM_832075
+ {
+ /* Cortex-A57 r0p0 - r1p2 */
+ .desc = "ARM erratum 832075",
+ .capability = ARM64_WORKAROUND_DEVICE_LOAD_ACQUIRE,
+ MIDR_RANGE(MIDR_CORTEX_A57, 0x00, 0x12),
+ },
+#endif
+ {
+ }
+};
+
+void check_local_cpu_errata(void)
+{
+ struct arm64_cpu_capabilities *cpus = arm64_errata;
+ int i;
+
+ for (i = 0; cpus[i].desc; i++) {
+ if (!cpus[i].is_affected(&cpus[i]))
+ continue;
+
+ if (!cpus_have_cap(cpus[i].capability))
+ pr_info("enabling workaround for %s\n", cpus[i].desc);
+ cpus_set_cap(cpus[i].capability);
+ }
+}
#include <asm/cachetype.h>
#include <asm/cpu.h>
#include <asm/cputype.h>
+#include <asm/cpufeature.h>
#include <linux/bitops.h>
#include <linux/bug.h>
/* If different, timekeeping will be broken (especially with KVM) */
diff |= CHECK(cntfrq, boot, cur, cpu);
+ /*
+ * The kernel uses self-hosted debug features and expects CPUs to
+ * support identical debug features. We presently need CTX_CMPs, WRPs,
+ * and BRPs to be identical.
+ * ID_AA64DFR1 is currently RES0.
+ */
+ diff |= CHECK(id_aa64dfr0, boot, cur, cpu);
+ diff |= CHECK(id_aa64dfr1, boot, cur, cpu);
+
/*
* Even in big.LITTLE, processors should be identical instruction-set
* wise.
diff |= CHECK(id_isar3, boot, cur, cpu);
diff |= CHECK(id_isar4, boot, cur, cpu);
diff |= CHECK(id_isar5, boot, cur, cpu);
- diff |= CHECK(id_mmfr0, boot, cur, cpu);
+ /*
+ * Regardless of the value of the AuxReg field, the AIFSR, ADFSR, and
+ * ACTLR formats could differ across CPUs and therefore would have to
+ * be trapped for virtualization anyway.
+ */
+ diff |= CHECK_MASK(id_mmfr0, 0xff0fffff, boot, cur, cpu);
diff |= CHECK(id_mmfr1, boot, cur, cpu);
diff |= CHECK(id_mmfr2, boot, cur, cpu);
diff |= CHECK(id_mmfr3, boot, cur, cpu);
* pretend to support them.
*/
WARN_TAINT_ONCE(diff, TAINT_CPU_OUT_OF_SPEC,
- "Unsupported CPU feature variation.");
+ "Unsupported CPU feature variation.\n");
}
static void __cpuinfo_store_cpu(struct cpuinfo_arm64 *info)
info->reg_dczid = read_cpuid(DCZID_EL0);
info->reg_midr = read_cpuid_id();
+ info->reg_id_aa64dfr0 = read_cpuid(ID_AA64DFR0_EL1);
+ info->reg_id_aa64dfr1 = read_cpuid(ID_AA64DFR1_EL1);
info->reg_id_aa64isar0 = read_cpuid(ID_AA64ISAR0_EL1);
info->reg_id_aa64isar1 = read_cpuid(ID_AA64ISAR1_EL1);
info->reg_id_aa64mmfr0 = read_cpuid(ID_AA64MMFR0_EL1);
info->reg_id_pfr1 = read_cpuid(ID_PFR1_EL1);
cpuinfo_detect_icache_policy(info);
+
+ check_local_cpu_errata();
}
void cpuinfo_store_cpu(void)
b.eq efi_load_fail
/*
- * efi_entry() will have relocated the kernel image if necessary
- * and we return here with device tree address in x0 and the kernel
- * entry point stored at *image_addr. Save those values in registers
- * which are callee preserved.
+ * efi_entry() will have copied the kernel image if necessary and we
+ * return here with device tree address in x0 and the kernel entry
+ * point stored at *image_addr. Save those values in registers which
+ * are callee preserved.
*/
mov x20, x0 // DTB address
ldr x0, [sp, #16] // relocated _text address
- mov x21, x0
+ ldr x21, =stext_offset
+ add x21, x0, x21
/*
- * Flush dcache covering current runtime addresses
- * of kernel text/data. Then flush all of icache.
+ * Calculate size of the kernel Image (same for original and copy).
*/
adrp x1, _text
add x1, x1, #:lo12:_text
add x2, x2, #:lo12:_edata
sub x1, x2, x1
+ /*
+ * Flush the copied Image to the PoC, and ensure it is not shadowed by
+ * stale icache entries from before relocation.
+ */
bl __flush_dcache_area
ic ialluis
+ /*
+ * Ensure that the rest of this function (in the original Image) is
+ * visible when the caches are disabled. The I-cache can't have stale
+ * entries for the VA range of the current image, so no maintenance is
+ * necessary.
+ */
+ adr x0, efi_stub_entry
+ adr x1, efi_stub_entry_end
+ sub x1, x1, x0
+ bl __flush_dcache_area
+
/* Turn off Dcache and MMU */
mrs x0, CurrentEL
cmp x0, #CurrentEL_EL2
ldp x29, x30, [sp], #32
ret
+efi_stub_entry_end:
ENDPROC(efi_stub_entry)
*
*/
+#include <linux/dmi.h>
#include <linux/efi.h>
#include <linux/export.h>
#include <linux/memblock.h>
*/
if (efi.systab->hdr.signature != EFI_SYSTEM_TABLE_SIGNATURE) {
pr_err("System table signature incorrect\n");
- return -EINVAL;
+ retval = -EINVAL;
+ goto out;
}
if ((efi.systab->hdr.revision >> 16) < 2)
pr_warn("Warning: EFI system table version %d.%02d, expected 2.00 or greater\n",
for (i = 0; i < (int) sizeof(vendor) - 1 && *c16; ++i)
vendor[i] = c16[i];
vendor[i] = '\0';
+ early_memunmap(c16, sizeof(vendor));
}
pr_info("EFI v%u.%.02u by %s\n",
efi.systab->hdr.revision & 0xffff, vendor);
retval = efi_config_init(NULL);
- if (retval == 0)
- set_bit(EFI_CONFIG_TABLES, &efi.flags);
- early_memunmap(c16, sizeof(vendor));
+out:
early_memunmap(efi.systab, sizeof(efi_system_table_t));
-
return retval;
}
-static __initdata char memory_type_name[][32] = {
- {"Reserved"},
- {"Loader Code"},
- {"Loader Data"},
- {"Boot Code"},
- {"Boot Data"},
- {"Runtime Code"},
- {"Runtime Data"},
- {"Conventional Memory"},
- {"Unusable Memory"},
- {"ACPI Reclaim Memory"},
- {"ACPI Memory NVS"},
- {"Memory Mapped I/O"},
- {"MMIO Port Space"},
- {"PAL Code"},
-};
-
/*
* Return true for RAM regions we want to permanently reserve.
*/
static __init int is_reserve_region(efi_memory_desc_t *md)
{
- if (!is_normal_ram(md))
+ switch (md->type) {
+ case EFI_LOADER_CODE:
+ case EFI_LOADER_DATA:
+ case EFI_BOOT_SERVICES_CODE:
+ case EFI_BOOT_SERVICES_DATA:
+ case EFI_CONVENTIONAL_MEMORY:
return 0;
-
- if (md->attribute & EFI_MEMORY_RUNTIME)
- return 1;
-
- if (md->type == EFI_ACPI_RECLAIM_MEMORY ||
- md->type == EFI_RESERVED_TYPE)
- return 1;
-
- return 0;
+ default:
+ break;
+ }
+ return is_normal_ram(md);
}
static __init void reserve_regions(void)
paddr = md->phys_addr;
npages = md->num_pages;
- if (uefi_debug)
- pr_info(" 0x%012llx-0x%012llx [%s]",
+ if (uefi_debug) {
+ char buf[64];
+
+ pr_info(" 0x%012llx-0x%012llx %s",
paddr, paddr + (npages << EFI_PAGE_SHIFT) - 1,
- memory_type_name[md->type]);
+ efi_md_typeattr_format(buf, sizeof(buf), md));
+ }
memrange_efi_to_native(&paddr, &npages);
size = npages << PAGE_SHIFT;
return -1;
}
- pr_info("Remapping and enabling EFI services.\n");
-
- /* replace early memmap mapping with permanent mapping */
mapsize = memmap.map_end - memmap.map;
early_memunmap(memmap.map, mapsize);
+
+ if (efi_runtime_disabled()) {
+ pr_info("EFI runtime services will be disabled.\n");
+ return -1;
+ }
+
+ pr_info("Remapping and enabling EFI services.\n");
+ /* replace early memmap mapping with permanent mapping */
memmap.map = (__force void *)ioremap_cache((phys_addr_t)memmap.phys_map,
mapsize);
memmap.map_end = memmap.map + mapsize;
return -1;
}
early_initcall(arm64_enter_virtual_mode);
+
+static int __init arm64_dmi_init(void)
+{
+ /*
+ * On arm64, DMI depends on UEFI, and dmi_scan_machine() needs to
+ * be called early because dmi_id_init(), which is an arch_initcall
+ * itself, depends on dmi_scan_machine() having been called already.
+ */
+ dmi_scan_machine();
+ if (dmi_available)
+ dmi_set_dump_stack_arch_desc();
+ return 0;
+}
+core_initcall(arm64_dmi_init);
ENTRY(_mcount)
mcount_enter
- ldr x0, =ftrace_trace_function
- ldr x2, [x0]
+ adrp x0, ftrace_trace_function
+ ldr x2, [x0, #:lo12:ftrace_trace_function]
adr x0, ftrace_stub
cmp x0, x2 // if (ftrace_trace_function
b.eq skip_ftrace_call // != ftrace_stub) {
mcount_exit // return;
// }
skip_ftrace_call:
- ldr x1, =ftrace_graph_return
- ldr x2, [x1] // if ((ftrace_graph_return
- cmp x0, x2 // != ftrace_stub)
- b.ne ftrace_graph_caller
-
- ldr x1, =ftrace_graph_entry // || (ftrace_graph_entry
- ldr x2, [x1] // != ftrace_graph_entry_stub))
- ldr x0, =ftrace_graph_entry_stub
+ adrp x1, ftrace_graph_return
+ ldr x2, [x1, #:lo12:ftrace_graph_return]
+ cmp x0, x2 // if ((ftrace_graph_return
+ b.ne ftrace_graph_caller // != ftrace_stub)
+
+ adrp x1, ftrace_graph_entry // || (ftrace_graph_entry
+ adrp x0, ftrace_graph_entry_stub // != ftrace_graph_entry_stub))
+ ldr x2, [x1, #:lo12:ftrace_graph_entry]
+ add x0, x0, #:lo12:ftrace_graph_entry_stub
cmp x0, x2
b.ne ftrace_graph_caller // ftrace_graph_caller();
#define BAD_ERROR 3
.macro kernel_entry, el, regsize = 64
- sub sp, sp, #S_FRAME_SIZE - S_LR // room for LR, SP, SPSR, ELR
+ sub sp, sp, #S_FRAME_SIZE
.if \regsize == 32
mov w0, w0 // zero upper 32 bits of x0
.endif
- push x28, x29
- push x26, x27
- push x24, x25
- push x22, x23
- push x20, x21
- push x18, x19
- push x16, x17
- push x14, x15
- push x12, x13
- push x10, x11
- push x8, x9
- push x6, x7
- push x4, x5
- push x2, x3
- push x0, x1
+ stp x0, x1, [sp, #16 * 0]
+ stp x2, x3, [sp, #16 * 1]
+ stp x4, x5, [sp, #16 * 2]
+ stp x6, x7, [sp, #16 * 3]
+ stp x8, x9, [sp, #16 * 4]
+ stp x10, x11, [sp, #16 * 5]
+ stp x12, x13, [sp, #16 * 6]
+ stp x14, x15, [sp, #16 * 7]
+ stp x16, x17, [sp, #16 * 8]
+ stp x18, x19, [sp, #16 * 9]
+ stp x20, x21, [sp, #16 * 10]
+ stp x22, x23, [sp, #16 * 11]
+ stp x24, x25, [sp, #16 * 12]
+ stp x26, x27, [sp, #16 * 13]
+ stp x28, x29, [sp, #16 * 14]
+
.if \el == 0
mrs x21, sp_el0
get_thread_info tsk // Ensure MDSCR_EL1.SS is clear,
.if \el == 0
ct_user_enter
ldr x23, [sp, #S_SP] // load return stack pointer
+ msr sp_el0, x23
.endif
+ msr elr_el1, x21 // set up the return data
+ msr spsr_el1, x22
.if \ret
ldr x1, [sp, #S_X1] // preserve x0 (syscall return)
- add sp, sp, S_X2
.else
- pop x0, x1
+ ldp x0, x1, [sp, #16 * 0]
.endif
- pop x2, x3 // load the rest of the registers
- pop x4, x5
- pop x6, x7
- pop x8, x9
- msr elr_el1, x21 // set up the return data
- msr spsr_el1, x22
- .if \el == 0
- msr sp_el0, x23
- .endif
- pop x10, x11
- pop x12, x13
- pop x14, x15
- pop x16, x17
- pop x18, x19
- pop x20, x21
- pop x22, x23
- pop x24, x25
- pop x26, x27
- pop x28, x29
- ldr lr, [sp], #S_FRAME_SIZE - S_LR // load LR and restore SP
+ ldp x2, x3, [sp, #16 * 1]
+ ldp x4, x5, [sp, #16 * 2]
+ ldp x6, x7, [sp, #16 * 3]
+ ldp x8, x9, [sp, #16 * 4]
+ ldp x10, x11, [sp, #16 * 5]
+ ldp x12, x13, [sp, #16 * 6]
+ ldp x14, x15, [sp, #16 * 7]
+ ldp x16, x17, [sp, #16 * 8]
+ ldp x18, x19, [sp, #16 * 9]
+ ldp x20, x21, [sp, #16 * 10]
+ ldp x22, x23, [sp, #16 * 11]
+ ldp x24, x25, [sp, #16 * 12]
+ ldp x26, x27, [sp, #16 * 13]
+ ldp x28, x29, [sp, #16 * 14]
+ ldr lr, [sp, #S_LR]
+ add sp, sp, #S_FRAME_SIZE // restore sp
eret // return to kernel
.endm
* Interrupt handling.
*/
.macro irq_handler
- ldr x1, handle_arch_irq
+ adrp x1, handle_arch_irq
+ ldr x1, [x1, #:lo12:handle_arch_irq]
mov x0, sp
blr x1
.endm
bic x0, x26, #(0xff << 56)
mov x1, x25
mov x2, sp
- adr lr, ret_to_user
- b do_mem_abort
+ bl do_mem_abort
+ b ret_to_user
el0_ia:
/*
* Instruction abort handling
mov x0, x26
orr x1, x25, #1 << 24 // use reserved ISS bit for instruction aborts
mov x2, sp
- adr lr, ret_to_user
- b do_mem_abort
+ bl do_mem_abort
+ b ret_to_user
el0_fpsimd_acc:
/*
* Floating Point or Advanced SIMD access
ct_user_exit
mov x0, x25
mov x1, sp
- adr lr, ret_to_user
- b do_fpsimd_acc
+ bl do_fpsimd_acc
+ b ret_to_user
el0_fpsimd_exc:
/*
* Floating Point or Advanced SIMD exception
ct_user_exit
mov x0, x25
mov x1, sp
- adr lr, ret_to_user
- b do_fpsimd_exc
+ bl do_fpsimd_exc
+ b ret_to_user
el0_sp_pc:
/*
* Stack or PC alignment exception handling
mov x0, x26
mov x1, x25
mov x2, sp
- adr lr, ret_to_user
- b do_sp_pc_abort
+ bl do_sp_pc_abort
+ b ret_to_user
el0_undef:
/*
* Undefined instruction
enable_dbg_and_irq
ct_user_exit
mov x0, sp
- adr lr, ret_to_user
- b do_undefinstr
+ bl do_undefinstr
+ b ret_to_user
el0_dbg:
/*
* Debug exception handling
mov x0, sp
mov x1, #BAD_SYNC
mrs x2, esr_el1
- adr lr, ret_to_user
- b bad_mode
+ bl bad_mode
+ b ret_to_user
ENDPROC(el0_sync)
.align 6
ldr x16, [tsk, #TI_FLAGS] // check for syscall hooks
tst x16, #_TIF_SYSCALL_WORK
b.ne __sys_trace
- adr lr, ret_fast_syscall // return address
cmp scno, sc_nr // check upper syscall limit
b.hs ni_sys
ldr x16, [stbl, scno, lsl #3] // address in the syscall table
- br x16 // call sys_* routine
+ blr x16 // call sys_* routine
+ b ret_fast_syscall
ni_sys:
mov x0, sp
- b do_ni_syscall
+ bl do_ni_syscall
+ b ret_fast_syscall
ENDPROC(el0_svc)
/*
* switches, and waiting for our parent to respond.
*/
__sys_trace:
- mov x0, sp
+ mov w0, #-1 // set default errno for
+ cmp scno, x0 // user-issued syscall(-1)
+ b.ne 1f
+ mov x0, #-ENOSYS
+ str x0, [sp, #S_X0]
+1: mov x0, sp
bl syscall_trace_enter
- adr lr, __sys_trace_return // return address
+ cmp w0, #-1 // skip the syscall?
+ b.eq __sys_trace_return_skipped
uxtw scno, w0 // syscall number (possibly new)
mov x1, sp // pointer to regs
cmp scno, sc_nr // check upper syscall limit
- b.hs ni_sys
+ b.hs __ni_sys_trace
ldp x0, x1, [sp] // restore the syscall args
ldp x2, x3, [sp, #S_X2]
ldp x4, x5, [sp, #S_X4]
ldp x6, x7, [sp, #S_X6]
ldr x16, [stbl, scno, lsl #3] // address in the syscall table
- br x16 // call sys_* routine
+ blr x16 // call sys_* routine
__sys_trace_return:
- str x0, [sp] // save returned x0
+ str x0, [sp, #S_X0] // save returned x0
+__sys_trace_return_skipped:
mov x0, sp
bl syscall_trace_exit
b ret_to_user
+__ni_sys_trace:
+ mov x0, sp
+ bl do_ni_syscall
+ b __sys_trace_return
+
/*
* Special system call wrappers.
*/
mov x0, sp
b sys_rt_sigreturn
ENDPROC(sys_rt_sigreturn_wrapper)
-
-ENTRY(handle_arch_irq)
- .quad 0
#endif
#ifdef CONFIG_EFI
+ .globl stext_offset
+ .set stext_offset, stext - efi_head
.align 3
pe_header:
.ascii "PE"
.long 0 // SizeOfInitializedData
.long 0 // SizeOfUninitializedData
.long efi_stub_entry - efi_head // AddressOfEntryPoint
- .long stext - efi_head // BaseOfCode
+ .long stext_offset // BaseOfCode
extra_header_fields:
.quad 0 // ImageBase
- .long 0x20 // SectionAlignment
- .long 0x8 // FileAlignment
+ .long 0x1000 // SectionAlignment
+ .long PECOFF_FILE_ALIGNMENT // FileAlignment
.short 0 // MajorOperatingSystemVersion
.short 0 // MinorOperatingSystemVersion
.short 0 // MajorImageVersion
.long _end - efi_head // SizeOfImage
// Everything before the kernel image is considered part of the header
- .long stext - efi_head // SizeOfHeaders
+ .long stext_offset // SizeOfHeaders
.long 0 // CheckSum
.short 0xa // Subsystem (EFI application)
.short 0 // DllCharacteristics
.byte 0
.byte 0 // end of 0 padding of section name
.long _end - stext // VirtualSize
- .long stext - efi_head // VirtualAddress
+ .long stext_offset // VirtualAddress
.long _edata - stext // SizeOfRawData
- .long stext - efi_head // PointerToRawData
+ .long stext_offset // PointerToRawData
.long 0 // PointerToRelocations (0 for executables)
.long 0 // PointerToLineNumbers (0 for executables)
.short 0 // NumberOfRelocations (0 for executables)
.short 0 // NumberOfLineNumbers (0 for executables)
.long 0xe0500020 // Characteristics (section flags)
- .align 5
+
+ /*
+ * EFI will load stext onwards at the 4k section alignment
+ * described in the PE/COFF header. To ensure that instruction
+ * sequences using an adrp and a :lo12: immediate will function
+ * correctly at this alignment, we must ensure that stext is
+ * placed at a 4k boundary in the Image to begin with.
+ */
+ .align 12
#endif
ENTRY(stext)
mov x0, x22
bl lookup_processor_type
mov x23, x0 // x23=current cpu_table
- cbz x23, __error_p // invalid processor (x23=0)?
+ /*
+ * __error_p may end up out of range for cbz if text areas are
+ * aligned up to section sizes.
+ */
+ cbnz x23, 1f // invalid processor (x23=0)?
+ b __error_p
+1:
bl __vet_fdt
bl __create_page_tables // x25=TTBR0, x26=TTBR1
/*
*/
ldr x27, __switch_data // address to jump to after
// MMU has been enabled
- adr lr, __enable_mmu // return (PIC) address
+ adrp lr, __enable_mmu // return (PIC) address
+ add lr, lr, #:lo12:__enable_mmu
ldr x12, [x23, #CPU_INFO_SETUP]
add x12, x12, x28 // __virt_to_phys
br x12 // initialise processor
ENDPROC(stext)
+/*
+ * Determine validity of the x21 FDT pointer.
+ * The dtb must be 8-byte aligned and live in the first 512M of memory.
+ */
+__vet_fdt:
+ tst x21, #0x7
+ b.ne 1f
+ cmp x21, x24
+ b.lt 1f
+ mov x0, #(1 << 29)
+ add x0, x0, x24
+ cmp x21, x0
+ b.ge 1f
+ ret
+1:
+ mov x21, #0
+ ret
+ENDPROC(__vet_fdt)
+/*
+ * Macro to create a table entry to the next page.
+ *
+ * tbl: page table address
+ * virt: virtual address
+ * shift: #imm page table shift
+ * ptrs: #imm pointers per table page
+ *
+ * Preserves: virt
+ * Corrupts: tmp1, tmp2
+ * Returns: tbl -> next level table page address
+ */
+ .macro create_table_entry, tbl, virt, shift, ptrs, tmp1, tmp2
+ lsr \tmp1, \virt, #\shift
+ and \tmp1, \tmp1, #\ptrs - 1 // table index
+ add \tmp2, \tbl, #PAGE_SIZE
+ orr \tmp2, \tmp2, #PMD_TYPE_TABLE // address of next table and entry type
+ str \tmp2, [\tbl, \tmp1, lsl #3]
+ add \tbl, \tbl, #PAGE_SIZE // next level table page
+ .endm
+
+/*
+ * Macro to populate the PGD (and possibily PUD) for the corresponding
+ * block entry in the next level (tbl) for the given virtual address.
+ *
+ * Preserves: tbl, next, virt
+ * Corrupts: tmp1, tmp2
+ */
+ .macro create_pgd_entry, tbl, virt, tmp1, tmp2
+ create_table_entry \tbl, \virt, PGDIR_SHIFT, PTRS_PER_PGD, \tmp1, \tmp2
+#if SWAPPER_PGTABLE_LEVELS == 3
+ create_table_entry \tbl, \virt, TABLE_SHIFT, PTRS_PER_PTE, \tmp1, \tmp2
+#endif
+ .endm
+
+/*
+ * Macro to populate block entries in the page table for the start..end
+ * virtual range (inclusive).
+ *
+ * Preserves: tbl, flags
+ * Corrupts: phys, start, end, pstate
+ */
+ .macro create_block_map, tbl, flags, phys, start, end
+ lsr \phys, \phys, #BLOCK_SHIFT
+ lsr \start, \start, #BLOCK_SHIFT
+ and \start, \start, #PTRS_PER_PTE - 1 // table index
+ orr \phys, \flags, \phys, lsl #BLOCK_SHIFT // table entry
+ lsr \end, \end, #BLOCK_SHIFT
+ and \end, \end, #PTRS_PER_PTE - 1 // table end index
+9999: str \phys, [\tbl, \start, lsl #3] // store the entry
+ add \start, \start, #1 // next entry
+ add \phys, \phys, #BLOCK_SIZE // next block
+ cmp \start, \end
+ b.ls 9999b
+ .endm
+
+/*
+ * Setup the initial page tables. We only setup the barest amount which is
+ * required to get the kernel running. The following sections are required:
+ * - identity mapping to enable the MMU (low address, TTBR0)
+ * - first few MB of the kernel linear mapping to jump to once the MMU has
+ * been enabled, including the FDT blob (TTBR1)
+ * - pgd entry for fixed mappings (TTBR1)
+ */
+__create_page_tables:
+ pgtbl x25, x26, x28 // idmap_pg_dir and swapper_pg_dir addresses
+ mov x27, lr
+
+ /*
+ * Invalidate the idmap and swapper page tables to avoid potential
+ * dirty cache lines being evicted.
+ */
+ mov x0, x25
+ add x1, x26, #SWAPPER_DIR_SIZE
+ bl __inval_cache_range
+
+ /*
+ * Clear the idmap and swapper page tables.
+ */
+ mov x0, x25
+ add x6, x26, #SWAPPER_DIR_SIZE
+1: stp xzr, xzr, [x0], #16
+ stp xzr, xzr, [x0], #16
+ stp xzr, xzr, [x0], #16
+ stp xzr, xzr, [x0], #16
+ cmp x0, x6
+ b.lo 1b
+
+ ldr x7, =MM_MMUFLAGS
+
+ /*
+ * Create the identity mapping.
+ */
+ mov x0, x25 // idmap_pg_dir
+ ldr x3, =KERNEL_START
+ add x3, x3, x28 // __pa(KERNEL_START)
+ create_pgd_entry x0, x3, x5, x6
+ ldr x6, =KERNEL_END
+ mov x5, x3 // __pa(KERNEL_START)
+ add x6, x6, x28 // __pa(KERNEL_END)
+ create_block_map x0, x7, x3, x5, x6
+
+ /*
+ * Map the kernel image (starting with PHYS_OFFSET).
+ */
+ mov x0, x26 // swapper_pg_dir
+ mov x5, #PAGE_OFFSET
+ create_pgd_entry x0, x5, x3, x6
+ ldr x6, =KERNEL_END
+ mov x3, x24 // phys offset
+ create_block_map x0, x7, x3, x5, x6
+
+ /*
+ * Map the FDT blob (maximum 2MB; must be within 512MB of
+ * PHYS_OFFSET).
+ */
+ mov x3, x21 // FDT phys address
+ and x3, x3, #~((1 << 21) - 1) // 2MB aligned
+ mov x6, #PAGE_OFFSET
+ sub x5, x3, x24 // subtract PHYS_OFFSET
+ tst x5, #~((1 << 29) - 1) // within 512MB?
+ csel x21, xzr, x21, ne // zero the FDT pointer
+ b.ne 1f
+ add x5, x5, x6 // __va(FDT blob)
+ add x6, x5, #1 << 21 // 2MB for the FDT blob
+ sub x6, x6, #1 // inclusive range
+ create_block_map x0, x7, x3, x5, x6
+1:
+ /*
+ * Since the page tables have been populated with non-cacheable
+ * accesses (MMU disabled), invalidate the idmap and swapper page
+ * tables again to remove any speculatively loaded cache lines.
+ */
+ mov x0, x25
+ add x1, x26, #SWAPPER_DIR_SIZE
+ bl __inval_cache_range
+
+ mov lr, x27
+ ret
+ENDPROC(__create_page_tables)
+ .ltorg
+
+ .align 3
+ .type __switch_data, %object
+__switch_data:
+ .quad __mmap_switched
+ .quad __bss_start // x6
+ .quad __bss_stop // x7
+ .quad processor_id // x4
+ .quad __fdt_pointer // x5
+ .quad memstart_addr // x6
+ .quad init_thread_union + THREAD_START_SP // sp
+
+/*
+ * The following fragment of code is executed with the MMU on in MMU mode, and
+ * uses absolute addresses; this is not position independent.
+ */
+__mmap_switched:
+ adr x3, __switch_data + 8
+
+ ldp x6, x7, [x3], #16
+1: cmp x6, x7
+ b.hs 2f
+ str xzr, [x6], #8 // Clear BSS
+ b 1b
+2:
+ ldp x4, x5, [x3], #16
+ ldr x6, [x3], #8
+ ldr x16, [x3]
+ mov sp, x16
+ str x22, [x4] // Save processor ID
+ str x21, [x5] // Save FDT pointer
+ str x24, [x6] // Save PHYS_OFFSET
+ mov x29, #0
+ b start_kernel
+ENDPROC(__mmap_switched)
+
+/*
+ * end early head section, begin head code that is also used for
+ * hotplug and needs to have the same protections as the text region
+ */
+ .section ".text","ax"
/*
* If we're fortunate enough to boot at EL2, ensure that the world is
* sane before dropping to EL1.
msr vttbr_el2, xzr
/* Hypervisor stub */
- adr x0, __hyp_stub_vectors
+ adrp x0, __hyp_stub_vectors
+ add x0, x0, #:lo12:__hyp_stub_vectors
msr vbar_el2, x0
/* spsr */
1: .quad .
.quad PAGE_OFFSET
-/*
- * Macro to create a table entry to the next page.
- *
- * tbl: page table address
- * virt: virtual address
- * shift: #imm page table shift
- * ptrs: #imm pointers per table page
- *
- * Preserves: virt
- * Corrupts: tmp1, tmp2
- * Returns: tbl -> next level table page address
- */
- .macro create_table_entry, tbl, virt, shift, ptrs, tmp1, tmp2
- lsr \tmp1, \virt, #\shift
- and \tmp1, \tmp1, #\ptrs - 1 // table index
- add \tmp2, \tbl, #PAGE_SIZE
- orr \tmp2, \tmp2, #PMD_TYPE_TABLE // address of next table and entry type
- str \tmp2, [\tbl, \tmp1, lsl #3]
- add \tbl, \tbl, #PAGE_SIZE // next level table page
- .endm
-
-/*
- * Macro to populate the PGD (and possibily PUD) for the corresponding
- * block entry in the next level (tbl) for the given virtual address.
- *
- * Preserves: tbl, next, virt
- * Corrupts: tmp1, tmp2
- */
- .macro create_pgd_entry, tbl, virt, tmp1, tmp2
- create_table_entry \tbl, \virt, PGDIR_SHIFT, PTRS_PER_PGD, \tmp1, \tmp2
-#if SWAPPER_PGTABLE_LEVELS == 3
- create_table_entry \tbl, \virt, TABLE_SHIFT, PTRS_PER_PTE, \tmp1, \tmp2
-#endif
- .endm
-
-/*
- * Macro to populate block entries in the page table for the start..end
- * virtual range (inclusive).
- *
- * Preserves: tbl, flags
- * Corrupts: phys, start, end, pstate
- */
- .macro create_block_map, tbl, flags, phys, start, end
- lsr \phys, \phys, #BLOCK_SHIFT
- lsr \start, \start, #BLOCK_SHIFT
- and \start, \start, #PTRS_PER_PTE - 1 // table index
- orr \phys, \flags, \phys, lsl #BLOCK_SHIFT // table entry
- lsr \end, \end, #BLOCK_SHIFT
- and \end, \end, #PTRS_PER_PTE - 1 // table end index
-9999: str \phys, [\tbl, \start, lsl #3] // store the entry
- add \start, \start, #1 // next entry
- add \phys, \phys, #BLOCK_SIZE // next block
- cmp \start, \end
- b.ls 9999b
- .endm
-
-/*
- * Setup the initial page tables. We only setup the barest amount which is
- * required to get the kernel running. The following sections are required:
- * - identity mapping to enable the MMU (low address, TTBR0)
- * - first few MB of the kernel linear mapping to jump to once the MMU has
- * been enabled, including the FDT blob (TTBR1)
- * - pgd entry for fixed mappings (TTBR1)
- */
-__create_page_tables:
- pgtbl x25, x26, x28 // idmap_pg_dir and swapper_pg_dir addresses
- mov x27, lr
-
- /*
- * Invalidate the idmap and swapper page tables to avoid potential
- * dirty cache lines being evicted.
- */
- mov x0, x25
- add x1, x26, #SWAPPER_DIR_SIZE
- bl __inval_cache_range
-
- /*
- * Clear the idmap and swapper page tables.
- */
- mov x0, x25
- add x6, x26, #SWAPPER_DIR_SIZE
-1: stp xzr, xzr, [x0], #16
- stp xzr, xzr, [x0], #16
- stp xzr, xzr, [x0], #16
- stp xzr, xzr, [x0], #16
- cmp x0, x6
- b.lo 1b
-
- ldr x7, =MM_MMUFLAGS
-
- /*
- * Create the identity mapping.
- */
- mov x0, x25 // idmap_pg_dir
- ldr x3, =KERNEL_START
- add x3, x3, x28 // __pa(KERNEL_START)
- create_pgd_entry x0, x3, x5, x6
- ldr x6, =KERNEL_END
- mov x5, x3 // __pa(KERNEL_START)
- add x6, x6, x28 // __pa(KERNEL_END)
- create_block_map x0, x7, x3, x5, x6
-
- /*
- * Map the kernel image (starting with PHYS_OFFSET).
- */
- mov x0, x26 // swapper_pg_dir
- mov x5, #PAGE_OFFSET
- create_pgd_entry x0, x5, x3, x6
- ldr x6, =KERNEL_END
- mov x3, x24 // phys offset
- create_block_map x0, x7, x3, x5, x6
-
- /*
- * Map the FDT blob (maximum 2MB; must be within 512MB of
- * PHYS_OFFSET).
- */
- mov x3, x21 // FDT phys address
- and x3, x3, #~((1 << 21) - 1) // 2MB aligned
- mov x6, #PAGE_OFFSET
- sub x5, x3, x24 // subtract PHYS_OFFSET
- tst x5, #~((1 << 29) - 1) // within 512MB?
- csel x21, xzr, x21, ne // zero the FDT pointer
- b.ne 1f
- add x5, x5, x6 // __va(FDT blob)
- add x6, x5, #1 << 21 // 2MB for the FDT blob
- sub x6, x6, #1 // inclusive range
- create_block_map x0, x7, x3, x5, x6
-1:
- /*
- * Since the page tables have been populated with non-cacheable
- * accesses (MMU disabled), invalidate the idmap and swapper page
- * tables again to remove any speculatively loaded cache lines.
- */
- mov x0, x25
- add x1, x26, #SWAPPER_DIR_SIZE
- bl __inval_cache_range
-
- mov lr, x27
- ret
-ENDPROC(__create_page_tables)
- .ltorg
-
- .align 3
- .type __switch_data, %object
-__switch_data:
- .quad __mmap_switched
- .quad __bss_start // x6
- .quad __bss_stop // x7
- .quad processor_id // x4
- .quad __fdt_pointer // x5
- .quad memstart_addr // x6
- .quad init_thread_union + THREAD_START_SP // sp
-
-/*
- * The following fragment of code is executed with the MMU on in MMU mode, and
- * uses absolute addresses; this is not position independent.
- */
-__mmap_switched:
- adr x3, __switch_data + 8
-
- ldp x6, x7, [x3], #16
-1: cmp x6, x7
- b.hs 2f
- str xzr, [x6], #8 // Clear BSS
- b 1b
-2:
- ldp x4, x5, [x3], #16
- ldr x6, [x3], #8
- ldr x16, [x3]
- mov sp, x16
- str x22, [x4] // Save processor ID
- str x21, [x5] // Save FDT pointer
- str x24, [x6] // Save PHYS_OFFSET
- mov x29, #0
- b start_kernel
-ENDPROC(__mmap_switched)
-
/*
* Exception handling. Something went wrong and we can't proceed. We ought to
* tell the user, but since we don't have any guarantee that we're even
.quad .
.quad cpu_table
.size __lookup_processor_type_data, . - __lookup_processor_type_data
-
-/*
- * Determine validity of the x21 FDT pointer.
- * The dtb must be 8-byte aligned and live in the first 512M of memory.
- */
-__vet_fdt:
- tst x21, #0x7
- b.ne 1f
- cmp x21, x24
- b.lt 1f
- mov x0, #(1 << 29)
- add x0, x0, x24
- cmp x21, x0
- b.ge 1f
- ret
-1:
- mov x21, #0
- ret
-ENDPROC(__vet_fdt)
* which ends with "dsb; isb" pair guaranteeing global
* visibility.
*/
- atomic_set(&pp->cpu_count, -1);
+ /* Notify other processors with an additional increment. */
+ atomic_inc(&pp->cpu_count);
} else {
- while (atomic_read(&pp->cpu_count) != -1)
+ while (atomic_read(&pp->cpu_count) <= num_online_cpus())
cpu_relax();
isb();
}
return aarch64_insn_encode_immediate(AARCH64_INSN_IMM_6, insn, shift);
}
+
+bool aarch32_insn_is_wide(u32 insn)
+{
+ return insn >= 0xe800;
+}
+
+/*
+ * Macros/defines for extracting register numbers from instruction.
+ */
+u32 aarch32_insn_extract_reg_num(u32 insn, int offset)
+{
+ return (insn & (0xf << offset)) >> offset;
+}
+
+#define OPC2_MASK 0x7
+#define OPC2_OFFSET 5
+u32 aarch32_insn_mcr_extract_opc2(u32 insn)
+{
+ return (insn & (OPC2_MASK << OPC2_OFFSET)) >> OPC2_OFFSET;
+}
+
+#define CRM_MASK 0xf
+u32 aarch32_insn_mcr_extract_crm(u32 insn)
+{
+ return insn & CRM_MASK;
+}
*/
void __memcpy_fromio(void *to, const volatile void __iomem *from, size_t count)
{
- unsigned char *t = to;
- while (count) {
+ while (count && (!IS_ALIGNED((unsigned long)from, 8) ||
+ !IS_ALIGNED((unsigned long)to, 8))) {
+ *(u8 *)to = __raw_readb(from);
+ from++;
+ to++;
count--;
- *t = readb(from);
- t++;
+ }
+
+ while (count >= 8) {
+ *(u64 *)to = __raw_readq(from);
+ from += 8;
+ to += 8;
+ count -= 8;
+ }
+
+ while (count) {
+ *(u8 *)to = __raw_readb(from);
from++;
+ to++;
+ count--;
}
}
EXPORT_SYMBOL(__memcpy_fromio);
*/
void __memcpy_toio(volatile void __iomem *to, const void *from, size_t count)
{
- const unsigned char *f = from;
- while (count) {
+ while (count && (!IS_ALIGNED((unsigned long)to, 8) ||
+ !IS_ALIGNED((unsigned long)from, 8))) {
+ __raw_writeb(*(volatile u8 *)from, to);
+ from++;
+ to++;
count--;
- writeb(*f, to);
- f++;
+ }
+
+ while (count >= 8) {
+ __raw_writeq(*(volatile u64 *)from, to);
+ from += 8;
+ to += 8;
+ count -= 8;
+ }
+
+ while (count) {
+ __raw_writeb(*(volatile u8 *)from, to);
+ from++;
to++;
+ count--;
}
}
EXPORT_SYMBOL(__memcpy_toio);
*/
void __memset_io(volatile void __iomem *dst, int c, size_t count)
{
- while (count) {
+ u64 qc = (u8)c;
+
+ qc |= qc << 8;
+ qc |= qc << 16;
+ qc |= qc << 32;
+
+ while (count && !IS_ALIGNED((unsigned long)dst, 8)) {
+ __raw_writeb(c, dst);
+ dst++;
count--;
- writeb(c, dst);
+ }
+
+ while (count >= 8) {
+ __raw_writeq(qc, dst);
+ dst += 8;
+ count -= 8;
+ }
+
+ while (count) {
+ __raw_writeb(c, dst);
dst++;
+ count--;
}
}
EXPORT_SYMBOL(__memset_io);
return 0;
}
+void (*handle_arch_irq)(struct pt_regs *) = NULL;
+
void __init set_handle_irq(void (*handle_irq)(struct pt_regs *))
{
if (handle_arch_irq)
#ifdef HAVE_JUMP_LABEL
-static void __arch_jump_label_transform(struct jump_entry *entry,
- enum jump_label_type type,
- bool is_static)
+void arch_jump_label_transform(struct jump_entry *entry,
+ enum jump_label_type type)
{
void *addr = (void *)entry->code;
u32 insn;
insn = aarch64_insn_gen_nop();
}
- if (is_static)
- aarch64_insn_patch_text_nosync(addr, insn);
- else
- aarch64_insn_patch_text(&addr, &insn, 1);
-}
-
-void arch_jump_label_transform(struct jump_entry *entry,
- enum jump_label_type type)
-{
- __arch_jump_label_transform(entry, type, false);
+ aarch64_insn_patch_text(&addr, &insn, 1);
}
void arch_jump_label_transform_static(struct jump_entry *entry,
enum jump_label_type type)
{
- __arch_jump_label_transform(entry, type, true);
+ /*
+ * We use the architected A64 NOP in arch_static_branch, so there's no
+ * need to patch an identical A64 NOP over the top of it here. The core
+ * will call arch_jump_label_transform from a module notifier if the
+ * NOP needs to be replaced by a branch.
+ */
}
#endif /* HAVE_JUMP_LABEL */
#include <linux/moduleloader.h>
#include <linux/vmalloc.h>
#include <asm/insn.h>
+#include <asm/sections.h>
#define AARCH64_INSN_IMM_MOVNZ AARCH64_INSN_IMM_MAX
#define AARCH64_INSN_IMM_MOVK AARCH64_INSN_IMM_16
me->name, (int)ELF64_R_TYPE(rel[i].r_info), val);
return -ENOEXEC;
}
+
+int module_finalize(const Elf_Ehdr *hdr,
+ const Elf_Shdr *sechdrs,
+ struct module *me)
+{
+ const Elf_Shdr *s, *se;
+ const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
+
+ for (s = sechdrs, se = sechdrs + hdr->e_shnum; s < se; s++) {
+ if (strcmp(".altinstructions", secstrs + s->sh_name) == 0) {
+ apply_alternatives((void *)s->sh_addr, s->sh_size);
+ return 0;
+ }
+ }
+
+ return 0;
+}
ret = 1;
}
- if (left > (s64)armpmu->max_period)
- left = armpmu->max_period;
+ /*
+ * Limit the maximum period to prevent the counter value
+ * from overtaking the one we are about to program. In
+ * effect we are reducing max_period to account for
+ * interrupt latency (and we are being very conservative).
+ */
+ if (left > (armpmu->max_period >> 1))
+ left = armpmu->max_period >> 1;
local64_set(&hwc->prev_count, (u64)-left);
{
return randomize_base(mm->brk);
}
-
-unsigned long randomize_et_dyn(unsigned long base)
-{
- return randomize_base(base);
-}
if (WARN_ON_ONCE(!index))
return -EINVAL;
- if (state->type == PSCI_POWER_STATE_TYPE_STANDBY)
+ if (state[index - 1].type == PSCI_POWER_STATE_TYPE_STANDBY)
ret = psci_ops.cpu_suspend(state[index - 1], 0);
else
ret = __cpu_suspend(index, psci_suspend_finisher);
#include <linux/smp.h>
#include <linux/ptrace.h>
#include <linux/user.h>
+#include <linux/seccomp.h>
#include <linux/security.h>
#include <linux/init.h>
#include <linux/signal.h>
return ret;
}
+static int system_call_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ int syscallno = task_pt_regs(target)->syscallno;
+
+ return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
+ &syscallno, 0, -1);
+}
+
+static int system_call_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ int syscallno, ret;
+
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &syscallno, 0, -1);
+ if (ret)
+ return ret;
+
+ task_pt_regs(target)->syscallno = syscallno;
+ return ret;
+}
+
enum aarch64_regset {
REGSET_GPR,
REGSET_FPR,
REGSET_HW_BREAK,
REGSET_HW_WATCH,
#endif
+ REGSET_SYSTEM_CALL,
};
static const struct user_regset aarch64_regsets[] = {
.set = hw_break_set,
},
#endif
+ [REGSET_SYSTEM_CALL] = {
+ .core_note_type = NT_ARM_SYSTEM_CALL,
+ .n = 1,
+ .size = sizeof(int),
+ .align = sizeof(int),
+ .get = system_call_get,
+ .set = system_call_set,
+ },
};
static const struct user_regset_view user_aarch64_view = {
asmlinkage int syscall_trace_enter(struct pt_regs *regs)
{
+ /* Do the secure computing check first; failures should be fast. */
+ if (secure_computing() == -1)
+ return -1;
+
if (test_thread_flag(TIF_SYSCALL_TRACE))
tracehook_report_syscall(regs, PTRACE_SYSCALL_ENTER);
#include <linux/of_fdt.h>
#include <linux/of_platform.h>
#include <linux/efi.h>
+#include <linux/personality.h>
#include <asm/fixmap.h>
#include <asm/cpu.h>
#include <asm/cputype.h>
#include <asm/elf.h>
#include <asm/cputable.h>
+#include <asm/cpufeature.h>
#include <asm/cpu_ops.h>
#include <asm/sections.h>
#include <asm/setup.h>
COMPAT_HWCAP_FAST_MULT|COMPAT_HWCAP_EDSP|\
COMPAT_HWCAP_TLS|COMPAT_HWCAP_VFP|\
COMPAT_HWCAP_VFPv3|COMPAT_HWCAP_VFPv4|\
- COMPAT_HWCAP_NEON|COMPAT_HWCAP_IDIV)
+ COMPAT_HWCAP_NEON|COMPAT_HWCAP_IDIV|\
+ COMPAT_HWCAP_LPAE)
unsigned int compat_elf_hwcap __read_mostly = COMPAT_ELF_HWCAP_DEFAULT;
unsigned int compat_elf_hwcap2 __read_mostly;
#endif
+DECLARE_BITMAP(cpu_hwcaps, ARM64_NCAPS);
+
static const char *cpu_name;
-static const char *machine_name;
phys_addr_t __fdt_pointer __initdata;
/*
void __init smp_setup_processor_id(void)
{
+ u64 mpidr = read_cpuid_mpidr() & MPIDR_HWID_BITMASK;
+ cpu_logical_map(0) = mpidr;
+
/*
* clear __my_cpu_offset on boot CPU to avoid hang caused by
* using percpu variable early, for example, lockdep will
* access percpu variable inside lock_release
*/
set_my_cpu_offset(0);
+ pr_info("Booting Linux on physical CPU 0x%lx\n", (unsigned long)mpidr);
}
bool arch_match_cpu_phys_id(int cpu, u64 phys_id)
cpu_relax();
}
- machine_name = of_flat_dt_get_machine_name();
+ dump_stack_set_arch_desc("%s (DT)", of_flat_dt_get_machine_name());
}
/*
*cmdline_p = boot_command_line;
+ early_fixmap_init();
early_ioremap_init();
parse_early_param();
psci_init();
- cpu_logical_map(0) = read_cpuid_mpidr() & MPIDR_HWID_BITMASK;
cpu_read_bootcpu_ops();
#ifdef CONFIG_SMP
smp_init_cpus();
NULL
};
+#ifdef CONFIG_COMPAT
+static const char *compat_hwcap_str[] = {
+ "swp",
+ "half",
+ "thumb",
+ "26bit",
+ "fastmult",
+ "fpa",
+ "vfp",
+ "edsp",
+ "java",
+ "iwmmxt",
+ "crunch",
+ "thumbee",
+ "neon",
+ "vfpv3",
+ "vfpv3d16",
+ "tls",
+ "vfpv4",
+ "idiva",
+ "idivt",
+ "vfpd32",
+ "lpae",
+ "evtstrm"
+};
+
+static const char *compat_hwcap2_str[] = {
+ "aes",
+ "pmull",
+ "sha1",
+ "sha2",
+ "crc32",
+ NULL
+};
+#endif /* CONFIG_COMPAT */
+
static int c_show(struct seq_file *m, void *v)
{
- int i;
-
- seq_printf(m, "Processor\t: %s rev %d (%s)\n",
- cpu_name, read_cpuid_id() & 15, ELF_PLATFORM);
+ int i, j;
for_each_online_cpu(i) {
+ struct cpuinfo_arm64 *cpuinfo = &per_cpu(cpu_data, i);
+ u32 midr = cpuinfo->reg_midr;
+
/*
* glibc reads /proc/cpuinfo to determine the number of
* online processors, looking for lines beginning with
#ifdef CONFIG_SMP
seq_printf(m, "processor\t: %d\n", i);
#endif
- }
-
- /* dump out the processor features */
- seq_puts(m, "Features\t: ");
-
- for (i = 0; hwcap_str[i]; i++)
- if (elf_hwcap & (1 << i))
- seq_printf(m, "%s ", hwcap_str[i]);
-
- seq_printf(m, "\nCPU implementer\t: 0x%02x\n", read_cpuid_id() >> 24);
- seq_printf(m, "CPU architecture: AArch64\n");
- seq_printf(m, "CPU variant\t: 0x%x\n", (read_cpuid_id() >> 20) & 15);
- seq_printf(m, "CPU part\t: 0x%03x\n", (read_cpuid_id() >> 4) & 0xfff);
- seq_printf(m, "CPU revision\t: %d\n", read_cpuid_id() & 15);
- seq_puts(m, "\n");
-
- seq_printf(m, "Hardware\t: %s\n", machine_name);
+ /*
+ * Dump out the common processor features in a single line.
+ * Userspace should read the hwcaps with getauxval(AT_HWCAP)
+ * rather than attempting to parse this, but there's a body of
+ * software which does already (at least for 32-bit).
+ */
+ seq_puts(m, "Features\t:");
+ if (personality(current->personality) == PER_LINUX32) {
+#ifdef CONFIG_COMPAT
+ for (j = 0; compat_hwcap_str[j]; j++)
+ if (compat_elf_hwcap & (1 << j))
+ seq_printf(m, " %s", compat_hwcap_str[j]);
+
+ for (j = 0; compat_hwcap2_str[j]; j++)
+ if (compat_elf_hwcap2 & (1 << j))
+ seq_printf(m, " %s", compat_hwcap2_str[j]);
+#endif /* CONFIG_COMPAT */
+ } else {
+ for (j = 0; hwcap_str[j]; j++)
+ if (elf_hwcap & (1 << j))
+ seq_printf(m, " %s", hwcap_str[j]);
+ }
+ seq_puts(m, "\n");
+
+ seq_printf(m, "CPU implementer\t: 0x%02x\n",
+ MIDR_IMPLEMENTOR(midr));
+ seq_printf(m, "CPU architecture: 8\n");
+ seq_printf(m, "CPU variant\t: 0x%x\n", MIDR_VARIANT(midr));
+ seq_printf(m, "CPU part\t: 0x%03x\n", MIDR_PARTNUM(midr));
+ seq_printf(m, "CPU revision\t: %d\n\n", MIDR_REVISION(midr));
+ }
return 0;
}
err |= __put_user(from->si_uid, &to->si_uid);
err |= __put_user((compat_uptr_t)(unsigned long)from->si_ptr, &to->si_ptr);
break;
+ case __SI_SYS:
+ err |= __put_user((compat_uptr_t)(unsigned long)
+ from->si_call_addr, &to->si_call_addr);
+ err |= __put_user(from->si_syscall, &to->si_syscall);
+ err |= __put_user(from->si_arch, &to->si_arch);
+ break;
default: /* this is just in case for now ... */
err |= __put_user(from->si_pid, &to->si_pid);
err |= __put_user(from->si_uid, &to->si_uid);
ret
ENDPROC(cpu_resume_after_mmu)
- .data
ENTRY(cpu_resume)
bl el2_setup // if in EL2 drop to EL1 cleanly
#ifdef CONFIG_SMP
mrs x1, mpidr_el1
- adr x4, mpidr_hash_ptr
- ldr x5, [x4]
- add x8, x4, x5 // x8 = struct mpidr_hash phys address
+ adrp x8, mpidr_hash
+ add x8, x8, #:lo12:mpidr_hash // x8 = struct mpidr_hash phys address
/* retrieve mpidr_hash members to compute the hash */
ldr x2, [x8, #MPIDR_HASH_MASK]
ldp w3, w4, [x8, #MPIDR_HASH_SHIFTS]
#else
mov x7, xzr
#endif
- adr x0, sleep_save_sp
+ adrp x0, sleep_save_sp
+ add x0, x0, #:lo12:sleep_save_sp
ldr x0, [x0, #SLEEP_SAVE_SP_PHYS]
ldr x0, [x0, x7, lsl #3]
/* load sp from context */
ldr x2, [x0, #CPU_CTX_SP]
- adr x1, sleep_idmap_phys
+ adrp x1, sleep_idmap_phys
/* load physical address of identity map page table in x1 */
- ldr x1, [x1]
+ ldr x1, [x1, #:lo12:sleep_idmap_phys]
mov sp, x2
/*
* cpu_do_resume expects x0 to contain context physical address
bl cpu_do_resume // PC relative jump, MMU off
b cpu_resume_mmu // Resume MMU, never returns
ENDPROC(cpu_resume)
-
- .align 3
-mpidr_hash_ptr:
- /*
- * offset of mpidr_hash symbol from current location
- * used to obtain run-time mpidr_hash address with MMU off
- */
- .quad mpidr_hash - .
-/*
- * physical address of identity mapped page tables
- */
- .type sleep_idmap_phys, #object
-ENTRY(sleep_idmap_phys)
- .quad 0
-/*
- * struct sleep_save_sp {
- * phys_addr_t *save_ptr_stash;
- * phys_addr_t save_ptr_stash_phys;
- * };
- */
- .type sleep_save_sp, #object
-ENTRY(sleep_save_sp)
- .space SLEEP_SAVE_SP_SZ // struct sleep_save_sp
#include <linux/of.h>
#include <linux/irq_work.h>
+#include <asm/alternative.h>
#include <asm/atomic.h>
#include <asm/cacheflush.h>
#include <asm/cpu.h>
void __init smp_cpus_done(unsigned int max_cpus)
{
pr_info("SMP: Total of %d processors activated.\n", num_online_cpus());
+ apply_alternatives_all();
}
void __init smp_prepare_boot_cpu(void)
return ret;
}
-extern struct sleep_save_sp sleep_save_sp;
-extern phys_addr_t sleep_idmap_phys;
+struct sleep_save_sp sleep_save_sp;
+phys_addr_t sleep_idmap_phys;
static int __init cpu_suspend_init(void)
{
#include <asm/cacheflush.h>
#include <asm/unistd.h>
-static inline void
-do_compat_cache_op(unsigned long start, unsigned long end, int flags)
+static long
+__do_compat_cache_op(unsigned long start, unsigned long end)
{
- struct mm_struct *mm = current->active_mm;
- struct vm_area_struct *vma;
+ long ret;
- if (end < start || flags)
- return;
+ do {
+ unsigned long chunk = min(PAGE_SIZE, end - start);
- down_read(&mm->mmap_sem);
- vma = find_vma(mm, start);
- if (vma && vma->vm_start < end) {
- if (start < vma->vm_start)
- start = vma->vm_start;
- if (end > vma->vm_end)
- end = vma->vm_end;
- up_read(&mm->mmap_sem);
- __flush_cache_user_range(start & PAGE_MASK, PAGE_ALIGN(end));
- return;
- }
- up_read(&mm->mmap_sem);
+ if (fatal_signal_pending(current))
+ return 0;
+
+ ret = __flush_cache_user_range(start, start + chunk);
+ if (ret)
+ return ret;
+
+ cond_resched();
+ start += chunk;
+ } while (start < end);
+
+ return 0;
}
+static inline long
+do_compat_cache_op(unsigned long start, unsigned long end, int flags)
+{
+ if (end < start || flags)
+ return -EINVAL;
+
+ if (!access_ok(VERIFY_READ, start, end - start))
+ return -EFAULT;
+
+ return __do_compat_cache_op(start, end);
+}
/*
* Handle all unrecognised system calls.
*/
* the specified region).
*/
case __ARM_NR_compat_cacheflush:
- do_compat_cache_op(regs->regs[0], regs->regs[1], regs->regs[2]);
- return 0;
+ return do_compat_cache_op(regs->regs[0], regs->regs[1], regs->regs[2]);
case __ARM_NR_compat_set_tls:
current->thread.tp_value = regs->regs[0];
/* Multiprocessor system : Multi-threads per core */
cpuid_topo->thread_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
cpuid_topo->core_id = MPIDR_AFFINITY_LEVEL(mpidr, 1);
- cpuid_topo->cluster_id = MPIDR_AFFINITY_LEVEL(mpidr, 2);
+ cpuid_topo->cluster_id = MPIDR_AFFINITY_LEVEL(mpidr, 2) |
+ MPIDR_AFFINITY_LEVEL(mpidr, 3) << 8;
} else {
/* Multiprocessor system : Single-thread per core */
cpuid_topo->thread_id = -1;
cpuid_topo->core_id = MPIDR_AFFINITY_LEVEL(mpidr, 0);
- cpuid_topo->cluster_id = MPIDR_AFFINITY_LEVEL(mpidr, 1);
+ cpuid_topo->cluster_id = MPIDR_AFFINITY_LEVEL(mpidr, 1) |
+ MPIDR_AFFINITY_LEVEL(mpidr, 2) << 8 |
+ MPIDR_AFFINITY_LEVEL(mpidr, 3) << 16;
}
pr_debug("CPU%u: cluster %d core %d thread %d mpidr %#016llx\n",
--- /dev/null
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM emulation
+
+#if !defined(_TRACE_EMULATION_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_EMULATION_H
+
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(instruction_emulation,
+
+ TP_PROTO(const char *instr, u64 addr),
+ TP_ARGS(instr, addr),
+
+ TP_STRUCT__entry(
+ __string(instr, instr)
+ __field(u64, addr)
+ ),
+
+ TP_fast_assign(
+ __assign_str(instr, instr);
+ __entry->addr = addr;
+ ),
+
+ TP_printk("instr=\"%s\" addr=0x%llx", __get_str(instr), __entry->addr)
+);
+
+#endif /* _TRACE_EMULATION_H */
+
+/* This part must be outside protection */
+#undef TRACE_INCLUDE_PATH
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_PATH .
+
+#define TRACE_INCLUDE_FILE trace-events-emulation
+#include <trace/define_trace.h>
}
}
+static LIST_HEAD(undef_hook);
+static DEFINE_RAW_SPINLOCK(undef_lock);
+
+void register_undef_hook(struct undef_hook *hook)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&undef_lock, flags);
+ list_add(&hook->node, &undef_hook);
+ raw_spin_unlock_irqrestore(&undef_lock, flags);
+}
+
+void unregister_undef_hook(struct undef_hook *hook)
+{
+ unsigned long flags;
+
+ raw_spin_lock_irqsave(&undef_lock, flags);
+ list_del(&hook->node);
+ raw_spin_unlock_irqrestore(&undef_lock, flags);
+}
+
+static int call_undef_hook(struct pt_regs *regs)
+{
+ struct undef_hook *hook;
+ unsigned long flags;
+ u32 instr;
+ int (*fn)(struct pt_regs *regs, u32 instr) = NULL;
+ void __user *pc = (void __user *)instruction_pointer(regs);
+
+ if (!user_mode(regs))
+ return 1;
+
+ if (compat_thumb_mode(regs)) {
+ /* 16-bit Thumb instruction */
+ if (get_user(instr, (u16 __user *)pc))
+ goto exit;
+ instr = le16_to_cpu(instr);
+ if (aarch32_insn_is_wide(instr)) {
+ u32 instr2;
+
+ if (get_user(instr2, (u16 __user *)(pc + 2)))
+ goto exit;
+ instr2 = le16_to_cpu(instr2);
+ instr = (instr << 16) | instr2;
+ }
+ } else {
+ /* 32-bit ARM instruction */
+ if (get_user(instr, (u32 __user *)pc))
+ goto exit;
+ instr = le32_to_cpu(instr);
+ }
+
+ raw_spin_lock_irqsave(&undef_lock, flags);
+ list_for_each_entry(hook, &undef_hook, node)
+ if ((instr & hook->instr_mask) == hook->instr_val &&
+ (regs->pstate & hook->pstate_mask) == hook->pstate_val)
+ fn = hook->fn;
+
+ raw_spin_unlock_irqrestore(&undef_lock, flags);
+exit:
+ return fn ? fn(regs, instr) : 1;
+}
+
asmlinkage void __exception do_undefinstr(struct pt_regs *regs)
{
siginfo_t info;
if (!aarch32_break_handler(regs))
return;
+ if (call_undef_hook(regs) == 0)
+ return;
+
if (show_unhandled_signals && unhandled_signal(current, SIGILL) &&
printk_ratelimit()) {
pr_info("%s[%d]: undefined instruction: pc=%p\n",
#include "image.h"
-#define ARM_EXIT_KEEP(x)
-#define ARM_EXIT_DISCARD(x) x
+/* .exit.text needed in case of alternative patching */
+#define ARM_EXIT_KEEP(x) x
+#define ARM_EXIT_DISCARD(x)
OUTPUT_ARCH(aarch64)
ENTRY(_text)
*(.hyp.text) \
VMLINUX_SYMBOL(__hyp_text_end) = .;
+/*
+ * The size of the PE/COFF section that covers the kernel image, which
+ * runs from stext to _edata, must be a round multiple of the PE/COFF
+ * FileAlignment, which we set to its minimum value of 0x200. 'stext'
+ * itself is 4 KB aligned, so padding out _edata to a 0x200 aligned
+ * boundary should be sufficient.
+ */
+PECOFF_FILE_ALIGNMENT = 0x200;
+
+#ifdef CONFIG_EFI
+#define PECOFF_EDATA_PADDING \
+ .pecoff_edata_padding : { BYTE(0); . = ALIGN(PECOFF_FILE_ALIGNMENT); }
+#else
+#define PECOFF_EDATA_PADDING
+#endif
+
SECTIONS
{
/*
. = ALIGN(PAGE_SIZE);
__init_end = .;
+ . = ALIGN(4);
+ .altinstructions : {
+ __alt_instructions = .;
+ *(.altinstructions)
+ __alt_instructions_end = .;
+ }
+ .altinstr_replacement : {
+ *(.altinstr_replacement)
+ }
+
+ . = ALIGN(PAGE_SIZE);
_data = .;
_sdata = .;
RW_DATA_SECTION(64, PAGE_SIZE, THREAD_SIZE)
+ PECOFF_EDATA_PADDING
_edata = .;
BSS_SECTION(0, 0, 0)
.macro activate_traps
ldr x2, [x0, #VCPU_HCR_EL2]
msr hcr_el2, x2
- ldr x2, =(CPTR_EL2_TTA)
+ mov x2, #CPTR_EL2_TTA
msr cptr_el2, x2
- ldr x2, =(1 << 15) // Trap CP15 Cr=15
+ mov x2, #(1 << 15) // Trap CP15 Cr=15
msr hstr_el2, x2
mrs x2, mdcr_el2
/* VBAR_EL1 */
{ Op0(0b11), Op1(0b000), CRn(0b1100), CRm(0b0000), Op2(0b000),
NULL, reset_val, VBAR_EL1, 0 },
+
+ /* ICC_SRE_EL1 */
+ { Op0(0b11), Op1(0b000), CRn(0b1100), CRm(0b1100), Op2(0b101),
+ trap_raz_wi },
+
/* CONTEXTIDR_EL1 */
{ Op0(0b11), Op1(0b000), CRn(0b1101), CRm(0b0000), Op2(0b001),
access_vm_reg, reset_val, CONTEXTIDR_EL1, 0 },
{ Op1( 0), CRn(10), CRm( 2), Op2( 1), access_vm_reg, NULL, c10_NMRR },
{ Op1( 0), CRn(10), CRm( 3), Op2( 0), access_vm_reg, NULL, c10_AMAIR0 },
{ Op1( 0), CRn(10), CRm( 3), Op2( 1), access_vm_reg, NULL, c10_AMAIR1 },
+
+ /* ICC_SRE */
+ { Op1( 0), CRn(12), CRm(12), Op2( 5), trap_raz_wi },
+
{ Op1( 0), CRn(13), CRm( 0), Op2( 1), access_vm_reg, NULL, c13_CID },
};
sub x1, x1, #2
4: adds x1, x1, #1
b.mi 5f
- strb wzr, [x0]
+USER(9f, strb wzr, [x0] )
5: mov x0, #0
ret
ENDPROC(__clear_user)
ioremap.o mmap.o pgd.o mmu.o \
context.o proc.o pageattr.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
+obj-$(CONFIG_ARM64_PTDUMP) += dump.o
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
+#include <linux/errno.h>
#include <linux/linkage.h>
#include <linux/init.h>
#include <asm/assembler.h>
+#include <asm/cpufeature.h>
+#include <asm/alternative-asm.h>
#include "proc-macros.S"
add x4, x4, x2
cmp x4, x1
b.lo 1b
-9: // ignore any faulting cache operation
dsb ish
isb
+ mov x0, #0
+ ret
+9:
+ mov x0, #-EFAULT
ret
ENDPROC(flush_icache_range)
ENDPROC(__flush_cache_user_range)
dcache_line_size x2, x3
sub x3, x2, #1
bic x0, x0, x3
-1: dc cvac, x0 // clean D / U line
+1: alternative_insn "dc cvac, x0", "dc civac, x0", ARM64_WORKAROUND_CLEAN_CACHE
add x0, x0, x2
cmp x0, x1
b.lo 1b
--- /dev/null
+/*
+ * Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ * Debug helper to dump the current kernel pagetables of the system
+ * so that we can see what the various memory ranges are set to.
+ *
+ * Derived from x86 and arm implementation:
+ * (C) Copyright 2008 Intel Corporation
+ *
+ * Author: Arjan van de Ven <arjan@linux.intel.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+#include <linux/debugfs.h>
+#include <linux/fs.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/seq_file.h>
+
+#include <asm/fixmap.h>
+#include <asm/pgtable.h>
+
+#define LOWEST_ADDR (UL(0xffffffffffffffff) << VA_BITS)
+
+struct addr_marker {
+ unsigned long start_address;
+ const char *name;
+};
+
+enum address_markers_idx {
+ VMALLOC_START_NR = 0,
+ VMALLOC_END_NR,
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+ VMEMMAP_START_NR,
+ VMEMMAP_END_NR,
+#endif
+ PCI_START_NR,
+ PCI_END_NR,
+ FIXADDR_START_NR,
+ FIXADDR_END_NR,
+ MODULES_START_NR,
+ MODUELS_END_NR,
+ KERNEL_SPACE_NR,
+};
+
+static struct addr_marker address_markers[] = {
+ { VMALLOC_START, "vmalloc() Area" },
+ { VMALLOC_END, "vmalloc() End" },
+#ifdef CONFIG_SPARSEMEM_VMEMMAP
+ { 0, "vmemmap start" },
+ { 0, "vmemmap end" },
+#endif
+ { (unsigned long) PCI_IOBASE, "PCI I/O start" },
+ { (unsigned long) PCI_IOBASE + SZ_16M, "PCI I/O end" },
+ { FIXADDR_START, "Fixmap start" },
+ { FIXADDR_TOP, "Fixmap end" },
+ { MODULES_VADDR, "Modules start" },
+ { MODULES_END, "Modules end" },
+ { PAGE_OFFSET, "Kernel Mapping" },
+ { -1, NULL },
+};
+
+struct pg_state {
+ struct seq_file *seq;
+ const struct addr_marker *marker;
+ unsigned long start_address;
+ unsigned level;
+ u64 current_prot;
+};
+
+struct prot_bits {
+ u64 mask;
+ u64 val;
+ const char *set;
+ const char *clear;
+};
+
+static const struct prot_bits pte_bits[] = {
+ {
+ .mask = PTE_USER,
+ .val = PTE_USER,
+ .set = "USR",
+ .clear = " ",
+ }, {
+ .mask = PTE_RDONLY,
+ .val = PTE_RDONLY,
+ .set = "ro",
+ .clear = "RW",
+ }, {
+ .mask = PTE_PXN,
+ .val = PTE_PXN,
+ .set = "NX",
+ .clear = "x ",
+ }, {
+ .mask = PTE_SHARED,
+ .val = PTE_SHARED,
+ .set = "SHD",
+ .clear = " ",
+ }, {
+ .mask = PTE_AF,
+ .val = PTE_AF,
+ .set = "AF",
+ .clear = " ",
+ }, {
+ .mask = PTE_NG,
+ .val = PTE_NG,
+ .set = "NG",
+ .clear = " ",
+ }, {
+ .mask = PTE_UXN,
+ .val = PTE_UXN,
+ .set = "UXN",
+ }, {
+ .mask = PTE_ATTRINDX_MASK,
+ .val = PTE_ATTRINDX(MT_DEVICE_nGnRnE),
+ .set = "DEVICE/nGnRnE",
+ }, {
+ .mask = PTE_ATTRINDX_MASK,
+ .val = PTE_ATTRINDX(MT_DEVICE_nGnRE),
+ .set = "DEVICE/nGnRE",
+ }, {
+ .mask = PTE_ATTRINDX_MASK,
+ .val = PTE_ATTRINDX(MT_DEVICE_GRE),
+ .set = "DEVICE/GRE",
+ }, {
+ .mask = PTE_ATTRINDX_MASK,
+ .val = PTE_ATTRINDX(MT_NORMAL_NC),
+ .set = "MEM/NORMAL-NC",
+ }, {
+ .mask = PTE_ATTRINDX_MASK,
+ .val = PTE_ATTRINDX(MT_NORMAL),
+ .set = "MEM/NORMAL",
+ }
+};
+
+struct pg_level {
+ const struct prot_bits *bits;
+ size_t num;
+ u64 mask;
+};
+
+static struct pg_level pg_level[] = {
+ {
+ }, { /* pgd */
+ .bits = pte_bits,
+ .num = ARRAY_SIZE(pte_bits),
+ }, { /* pud */
+ .bits = pte_bits,
+ .num = ARRAY_SIZE(pte_bits),
+ }, { /* pmd */
+ .bits = pte_bits,
+ .num = ARRAY_SIZE(pte_bits),
+ }, { /* pte */
+ .bits = pte_bits,
+ .num = ARRAY_SIZE(pte_bits),
+ },
+};
+
+static void dump_prot(struct pg_state *st, const struct prot_bits *bits,
+ size_t num)
+{
+ unsigned i;
+
+ for (i = 0; i < num; i++, bits++) {
+ const char *s;
+
+ if ((st->current_prot & bits->mask) == bits->val)
+ s = bits->set;
+ else
+ s = bits->clear;
+
+ if (s)
+ seq_printf(st->seq, " %s", s);
+ }
+}
+
+static void note_page(struct pg_state *st, unsigned long addr, unsigned level,
+ u64 val)
+{
+ static const char units[] = "KMGTPE";
+ u64 prot = val & pg_level[level].mask;
+
+ if (addr < LOWEST_ADDR)
+ return;
+
+ if (!st->level) {
+ st->level = level;
+ st->current_prot = prot;
+ st->start_address = addr;
+ seq_printf(st->seq, "---[ %s ]---\n", st->marker->name);
+ } else if (prot != st->current_prot || level != st->level ||
+ addr >= st->marker[1].start_address) {
+ const char *unit = units;
+ unsigned long delta;
+
+ if (st->current_prot) {
+ seq_printf(st->seq, "0x%16lx-0x%16lx ",
+ st->start_address, addr);
+
+ delta = (addr - st->start_address) >> 10;
+ while (!(delta & 1023) && unit[1]) {
+ delta >>= 10;
+ unit++;
+ }
+ seq_printf(st->seq, "%9lu%c", delta, *unit);
+ if (pg_level[st->level].bits)
+ dump_prot(st, pg_level[st->level].bits,
+ pg_level[st->level].num);
+ seq_puts(st->seq, "\n");
+ }
+
+ if (addr >= st->marker[1].start_address) {
+ st->marker++;
+ seq_printf(st->seq, "---[ %s ]---\n", st->marker->name);
+ }
+
+ st->start_address = addr;
+ st->current_prot = prot;
+ st->level = level;
+ }
+
+ if (addr >= st->marker[1].start_address) {
+ st->marker++;
+ seq_printf(st->seq, "---[ %s ]---\n", st->marker->name);
+ }
+
+}
+
+static void walk_pte(struct pg_state *st, pmd_t *pmd, unsigned long start)
+{
+ pte_t *pte = pte_offset_kernel(pmd, 0);
+ unsigned long addr;
+ unsigned i;
+
+ for (i = 0; i < PTRS_PER_PTE; i++, pte++) {
+ addr = start + i * PAGE_SIZE;
+ note_page(st, addr, 4, pte_val(*pte));
+ }
+}
+
+static void walk_pmd(struct pg_state *st, pud_t *pud, unsigned long start)
+{
+ pmd_t *pmd = pmd_offset(pud, 0);
+ unsigned long addr;
+ unsigned i;
+
+ for (i = 0; i < PTRS_PER_PMD; i++, pmd++) {
+ addr = start + i * PMD_SIZE;
+ if (pmd_none(*pmd) || pmd_sect(*pmd) || pmd_bad(*pmd))
+ note_page(st, addr, 3, pmd_val(*pmd));
+ else
+ walk_pte(st, pmd, addr);
+ }
+}
+
+static void walk_pud(struct pg_state *st, pgd_t *pgd, unsigned long start)
+{
+ pud_t *pud = pud_offset(pgd, 0);
+ unsigned long addr;
+ unsigned i;
+
+ for (i = 0; i < PTRS_PER_PUD; i++, pud++) {
+ addr = start + i * PUD_SIZE;
+ if (pud_none(*pud) || pud_sect(*pud) || pud_bad(*pud))
+ note_page(st, addr, 2, pud_val(*pud));
+ else
+ walk_pmd(st, pud, addr);
+ }
+}
+
+static void walk_pgd(struct pg_state *st, struct mm_struct *mm, unsigned long start)
+{
+ pgd_t *pgd = pgd_offset(mm, 0);
+ unsigned i;
+ unsigned long addr;
+
+ for (i = 0; i < PTRS_PER_PGD; i++, pgd++) {
+ addr = start + i * PGDIR_SIZE;
+ if (pgd_none(*pgd) || pgd_bad(*pgd))
+ note_page(st, addr, 1, pgd_val(*pgd));
+ else
+ walk_pud(st, pgd, addr);
+ }
+}
+
+static int ptdump_show(struct seq_file *m, void *v)
+{
+ struct pg_state st = {
+ .seq = m,
+ .marker = address_markers,
+ };
+
+ walk_pgd(&st, &init_mm, LOWEST_ADDR);
+
+ note_page(&st, 0, 0, 0);
+ return 0;
+}
+
+static int ptdump_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, ptdump_show, NULL);
+}
+
+static const struct file_operations ptdump_fops = {
+ .open = ptdump_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int ptdump_init(void)
+{
+ struct dentry *pe;
+ unsigned i, j;
+
+ for (i = 0; i < ARRAY_SIZE(pg_level); i++)
+ if (pg_level[i].bits)
+ for (j = 0; j < pg_level[i].num; j++)
+ pg_level[i].mask |= pg_level[i].bits[j].mask;
+
+ address_markers[VMEMMAP_START_NR].start_address =
+ (unsigned long)virt_to_page(PAGE_OFFSET);
+ address_markers[VMEMMAP_END_NR].start_address =
+ (unsigned long)virt_to_page(high_memory);
+
+ pe = debugfs_create_file("kernel_page_tables", 0400, NULL, NULL,
+ &ptdump_fops);
+ return pe ? 0 : -ENOMEM;
+}
+device_initcall(ptdump_init);
{ do_bad, SIGBUS, 0, "level 1 address size fault" },
{ do_bad, SIGBUS, 0, "level 2 address size fault" },
{ do_bad, SIGBUS, 0, "level 3 address size fault" },
- { do_translation_fault, SIGSEGV, SEGV_MAPERR, "input address range fault" },
+ { do_translation_fault, SIGSEGV, SEGV_MAPERR, "level 0 translation fault" },
{ do_translation_fault, SIGSEGV, SEGV_MAPERR, "level 1 translation fault" },
{ do_translation_fault, SIGSEGV, SEGV_MAPERR, "level 2 translation fault" },
{ do_page_fault, SIGSEGV, SEGV_MAPERR, "level 3 translation fault" },
#include <asm/setup.h>
#include <asm/sizes.h>
#include <asm/tlb.h>
+#include <asm/alternative.h>
#include "mm.h"
void free_initmem(void)
{
free_initmem_default(0);
+ free_alternatives_memory();
}
#ifdef CONFIG_BLK_DEV_INITRD
}
EXPORT_SYMBOL(ioremap_cache);
-static pte_t bm_pte[PTRS_PER_PTE] __page_aligned_bss;
-#if CONFIG_ARM64_PGTABLE_LEVELS > 2
-static pte_t bm_pmd[PTRS_PER_PMD] __page_aligned_bss;
-#endif
-#if CONFIG_ARM64_PGTABLE_LEVELS > 3
-static pte_t bm_pud[PTRS_PER_PUD] __page_aligned_bss;
-#endif
-
-static inline pud_t * __init early_ioremap_pud(unsigned long addr)
-{
- pgd_t *pgd;
-
- pgd = pgd_offset_k(addr);
- BUG_ON(pgd_none(*pgd) || pgd_bad(*pgd));
-
- return pud_offset(pgd, addr);
-}
-
-static inline pmd_t * __init early_ioremap_pmd(unsigned long addr)
-{
- pud_t *pud = early_ioremap_pud(addr);
-
- BUG_ON(pud_none(*pud) || pud_bad(*pud));
-
- return pmd_offset(pud, addr);
-}
-
-static inline pte_t * __init early_ioremap_pte(unsigned long addr)
-{
- pmd_t *pmd = early_ioremap_pmd(addr);
-
- BUG_ON(pmd_none(*pmd) || pmd_bad(*pmd));
-
- return pte_offset_kernel(pmd, addr);
-}
-
+/*
+ * Must be called after early_fixmap_init
+ */
void __init early_ioremap_init(void)
{
- pgd_t *pgd;
- pud_t *pud;
- pmd_t *pmd;
- unsigned long addr = fix_to_virt(FIX_BTMAP_BEGIN);
-
- pgd = pgd_offset_k(addr);
- pgd_populate(&init_mm, pgd, bm_pud);
- pud = pud_offset(pgd, addr);
- pud_populate(&init_mm, pud, bm_pmd);
- pmd = pmd_offset(pud, addr);
- pmd_populate_kernel(&init_mm, pmd, bm_pte);
-
- /*
- * The boot-ioremap range spans multiple pmds, for which
- * we are not prepared:
- */
- BUILD_BUG_ON((__fix_to_virt(FIX_BTMAP_BEGIN) >> PMD_SHIFT)
- != (__fix_to_virt(FIX_BTMAP_END) >> PMD_SHIFT));
-
- if (pmd != early_ioremap_pmd(fix_to_virt(FIX_BTMAP_END))) {
- WARN_ON(1);
- pr_warn("pmd %p != %p\n",
- pmd, early_ioremap_pmd(fix_to_virt(FIX_BTMAP_END)));
- pr_warn("fix_to_virt(FIX_BTMAP_BEGIN): %08lx\n",
- fix_to_virt(FIX_BTMAP_BEGIN));
- pr_warn("fix_to_virt(FIX_BTMAP_END): %08lx\n",
- fix_to_virt(FIX_BTMAP_END));
-
- pr_warn("FIX_BTMAP_END: %d\n", FIX_BTMAP_END);
- pr_warn("FIX_BTMAP_BEGIN: %d\n",
- FIX_BTMAP_BEGIN);
- }
-
early_ioremap_setup();
}
-
-void __init __early_set_fixmap(enum fixed_addresses idx,
- phys_addr_t phys, pgprot_t flags)
-{
- unsigned long addr = __fix_to_virt(idx);
- pte_t *pte;
-
- if (idx >= __end_of_fixed_addresses) {
- BUG();
- return;
- }
-
- pte = early_ioremap_pte(addr);
-
- if (pgprot_val(flags))
- set_pte(pte, pfn_pte(phys >> PAGE_SHIFT, flags));
- else {
- pte_clear(&init_mm, addr, pte);
- flush_tlb_kernel_range(addr, addr+PAGE_SIZE);
- }
-}
extern void __init bootmem_init(void);
-extern void __init arm64_swiotlb_init(void);
return sysctl_legacy_va_layout;
}
-/*
- * Since get_random_int() returns the same value within a 1 jiffy window, we
- * will almost always get the same randomisation for the stack and mmap
- * region. This will mean the relative distance between stack and mmap will be
- * the same.
- *
- * To avoid this we can shift the randomness by 1 bit.
- */
static unsigned long mmap_rnd(void)
{
unsigned long rnd = 0;
if (current->flags & PF_RANDOMIZE)
- rnd = (long)get_random_int() & (STACK_RND_MASK >> 1);
+ rnd = (long)get_random_int() & STACK_RND_MASK;
- return rnd << (PAGE_SHIFT + 1);
+ return rnd << PAGE_SHIFT;
}
static unsigned long mmap_base(void)
#include <linux/io.h>
#include <asm/cputype.h>
+#include <asm/fixmap.h>
#include <asm/sections.h>
#include <asm/setup.h>
#include <asm/sizes.h>
}
static void __init alloc_init_pud(pgd_t *pgd, unsigned long addr,
- unsigned long end, unsigned long phys,
+ unsigned long end, phys_addr_t phys,
int map_io)
{
pud_t *pud;
* create_mapping requires puds, pmds and ptes to be allocated from
* memory addressable from the initial direct kernel mapping.
*
- * The initial direct kernel mapping, located at swapper_pg_dir,
- * gives us PUD_SIZE memory starting from PHYS_OFFSET (which must be
- * aligned to 2MB as per Documentation/arm64/booting.txt).
+ * The initial direct kernel mapping, located at swapper_pg_dir, gives
+ * us PUD_SIZE (4K pages) or PMD_SIZE (64K pages) memory starting from
+ * PHYS_OFFSET (which must be aligned to 2MB as per
+ * Documentation/arm64/booting.txt).
*/
- limit = PHYS_OFFSET + PUD_SIZE;
+ if (IS_ENABLED(CONFIG_ARM64_64K_PAGES))
+ limit = PHYS_OFFSET + PMD_SIZE;
+ else
+ limit = PHYS_OFFSET + PUD_SIZE;
memblock_set_current_limit(limit);
/* map all the memory banks */
{
}
#endif /* CONFIG_SPARSEMEM_VMEMMAP */
+
+static pte_t bm_pte[PTRS_PER_PTE] __page_aligned_bss;
+#if CONFIG_ARM64_PGTABLE_LEVELS > 2
+static pmd_t bm_pmd[PTRS_PER_PMD] __page_aligned_bss;
+#endif
+#if CONFIG_ARM64_PGTABLE_LEVELS > 3
+static pud_t bm_pud[PTRS_PER_PUD] __page_aligned_bss;
+#endif
+
+static inline pud_t * fixmap_pud(unsigned long addr)
+{
+ pgd_t *pgd = pgd_offset_k(addr);
+
+ BUG_ON(pgd_none(*pgd) || pgd_bad(*pgd));
+
+ return pud_offset(pgd, addr);
+}
+
+static inline pmd_t * fixmap_pmd(unsigned long addr)
+{
+ pud_t *pud = fixmap_pud(addr);
+
+ BUG_ON(pud_none(*pud) || pud_bad(*pud));
+
+ return pmd_offset(pud, addr);
+}
+
+static inline pte_t * fixmap_pte(unsigned long addr)
+{
+ pmd_t *pmd = fixmap_pmd(addr);
+
+ BUG_ON(pmd_none(*pmd) || pmd_bad(*pmd));
+
+ return pte_offset_kernel(pmd, addr);
+}
+
+void __init early_fixmap_init(void)
+{
+ pgd_t *pgd;
+ pud_t *pud;
+ pmd_t *pmd;
+ unsigned long addr = FIXADDR_START;
+
+ pgd = pgd_offset_k(addr);
+ pgd_populate(&init_mm, pgd, bm_pud);
+ pud = pud_offset(pgd, addr);
+ pud_populate(&init_mm, pud, bm_pmd);
+ pmd = pmd_offset(pud, addr);
+ pmd_populate_kernel(&init_mm, pmd, bm_pte);
+
+ /*
+ * The boot-ioremap range spans multiple pmds, for which
+ * we are not preparted:
+ */
+ BUILD_BUG_ON((__fix_to_virt(FIX_BTMAP_BEGIN) >> PMD_SHIFT)
+ != (__fix_to_virt(FIX_BTMAP_END) >> PMD_SHIFT));
+
+ if ((pmd != fixmap_pmd(fix_to_virt(FIX_BTMAP_BEGIN)))
+ || pmd != fixmap_pmd(fix_to_virt(FIX_BTMAP_END))) {
+ WARN_ON(1);
+ pr_warn("pmd %p != %p, %p\n",
+ pmd, fixmap_pmd(fix_to_virt(FIX_BTMAP_BEGIN)),
+ fixmap_pmd(fix_to_virt(FIX_BTMAP_END)));
+ pr_warn("fix_to_virt(FIX_BTMAP_BEGIN): %08lx\n",
+ fix_to_virt(FIX_BTMAP_BEGIN));
+ pr_warn("fix_to_virt(FIX_BTMAP_END): %08lx\n",
+ fix_to_virt(FIX_BTMAP_END));
+
+ pr_warn("FIX_BTMAP_END: %d\n", FIX_BTMAP_END);
+ pr_warn("FIX_BTMAP_BEGIN: %d\n", FIX_BTMAP_BEGIN);
+ }
+}
+
+void __set_fixmap(enum fixed_addresses idx,
+ phys_addr_t phys, pgprot_t flags)
+{
+ unsigned long addr = __fix_to_virt(idx);
+ pte_t *pte;
+
+ if (idx >= __end_of_fixed_addresses) {
+ BUG();
+ return;
+ }
+
+ pte = fixmap_pte(addr);
+
+ if (pgprot_val(flags)) {
+ set_pte(pte, pfn_pte(phys >> PAGE_SHIFT, flags));
+ } else {
+ pte_clear(&init_mm, addr, pte);
+ flush_tlb_kernel_range(addr, addr+PAGE_SIZE);
+ }
+}
#define PGD_SIZE (PTRS_PER_PGD * sizeof(pgd_t))
+static struct kmem_cache *pgd_cache;
+
pgd_t *pgd_alloc(struct mm_struct *mm)
{
if (PGD_SIZE == PAGE_SIZE)
- return (pgd_t *)get_zeroed_page(GFP_KERNEL);
+ return (pgd_t *)__get_free_page(PGALLOC_GFP);
else
- return kzalloc(PGD_SIZE, GFP_KERNEL);
+ return kmem_cache_alloc(pgd_cache, PGALLOC_GFP);
}
void pgd_free(struct mm_struct *mm, pgd_t *pgd)
if (PGD_SIZE == PAGE_SIZE)
free_page((unsigned long)pgd);
else
- kfree(pgd);
+ kmem_cache_free(pgd_cache, pgd);
+}
+
+static int __init pgd_cache_init(void)
+{
+ /*
+ * Naturally aligned pgds required by the architecture.
+ */
+ if (PGD_SIZE != PAGE_SIZE)
+ pgd_cache = kmem_cache_create("pgd_cache", PGD_SIZE, PGD_SIZE,
+ SLAB_PANIC, NULL);
+ return 0;
}
+core_initcall(pgd_cache_init);
/* Data-processing (2 source) */
/* Rd = Rn OP Rm */
-#define A64_UDIV(sf, Rd, Rn, Rm) aarch64_insn_gen_data2(Rd, Rn, Rm, \
- A64_VARIANT(sf), AARCH64_INSN_DATA2_UDIV)
+#define A64_DATA2(sf, Rd, Rn, Rm, type) aarch64_insn_gen_data2(Rd, Rn, Rm, \
+ A64_VARIANT(sf), AARCH64_INSN_DATA2_##type)
+#define A64_UDIV(sf, Rd, Rn, Rm) A64_DATA2(sf, Rd, Rn, Rm, UDIV)
+#define A64_LSLV(sf, Rd, Rn, Rm) A64_DATA2(sf, Rd, Rn, Rm, LSLV)
+#define A64_LSRV(sf, Rd, Rn, Rm) A64_DATA2(sf, Rd, Rn, Rm, LSRV)
+#define A64_ASRV(sf, Rd, Rn, Rm) A64_DATA2(sf, Rd, Rn, Rm, ASRV)
/* Data-processing (3 source) */
/* Rd = Ra + Rn * Rm */
#define pr_fmt(fmt) "bpf_jit: " fmt
#include <linux/filter.h>
-#include <linux/moduleloader.h>
#include <linux/printk.h>
#include <linux/skbuff.h>
#include <linux/slab.h>
+
#include <asm/byteorder.h>
#include <asm/cacheflush.h>
+#include <asm/debug-monitors.h>
#include "bpf_jit.h"
const struct bpf_prog *prog;
int idx;
int tmp_used;
- int body_offset;
+ int epilogue_offset;
int *offset;
u32 *image;
};
return to - from;
}
+static void jit_fill_hole(void *area, unsigned int size)
+{
+ u32 *ptr;
+ /* We are guaranteed to have aligned memory. */
+ for (ptr = area; size >= sizeof(u32); size -= sizeof(u32))
+ *ptr++ = cpu_to_le32(AARCH64_BREAK_FAULT);
+}
+
static inline int epilogue_offset(const struct jit_ctx *ctx)
{
- int to = ctx->offset[ctx->prog->len - 1];
- int from = ctx->idx - ctx->body_offset;
+ int to = ctx->epilogue_offset;
+ int from = ctx->idx;
return to - from;
}
emit(A64_RET(A64_LR), ctx);
}
+/* JITs an eBPF instruction.
+ * Returns:
+ * 0 - successfully JITed an 8-byte eBPF instruction.
+ * >0 - successfully JITed a 16-byte eBPF instruction.
+ * <0 - failed to JIT.
+ */
static int build_insn(const struct bpf_insn *insn, struct jit_ctx *ctx)
{
const u8 code = insn->code;
emit(A64_MUL(is64, tmp, tmp, src), ctx);
emit(A64_SUB(is64, dst, dst, tmp), ctx);
break;
+ case BPF_ALU | BPF_LSH | BPF_X:
+ case BPF_ALU64 | BPF_LSH | BPF_X:
+ emit(A64_LSLV(is64, dst, dst, src), ctx);
+ break;
+ case BPF_ALU | BPF_RSH | BPF_X:
+ case BPF_ALU64 | BPF_RSH | BPF_X:
+ emit(A64_LSRV(is64, dst, dst, src), ctx);
+ break;
+ case BPF_ALU | BPF_ARSH | BPF_X:
+ case BPF_ALU64 | BPF_ARSH | BPF_X:
+ emit(A64_ASRV(is64, dst, dst, src), ctx);
+ break;
/* dst = -dst */
case BPF_ALU | BPF_NEG:
case BPF_ALU64 | BPF_NEG:
}
/* function return */
case BPF_JMP | BPF_EXIT:
+ /* Optimization: when last instruction is EXIT,
+ simply fallthrough to epilogue. */
if (i == ctx->prog->len - 1)
break;
jmp_offset = epilogue_offset(ctx);
emit(A64_B(jmp_offset), ctx);
break;
+ /* dst = imm64 */
+ case BPF_LD | BPF_IMM | BPF_DW:
+ {
+ const struct bpf_insn insn1 = insn[1];
+ u64 imm64;
+
+ if (insn1.code != 0 || insn1.src_reg != 0 ||
+ insn1.dst_reg != 0 || insn1.off != 0) {
+ /* Note: verifier in BPF core must catch invalid
+ * instructions.
+ */
+ pr_err_once("Invalid BPF_LD_IMM64 instruction\n");
+ return -EINVAL;
+ }
+
+ imm64 = (u64)insn1.imm << 32 | imm;
+ emit_a64_mov_i64(dst, imm64, ctx);
+
+ return 1;
+ }
+
/* LDX: dst = *(size *)(src + off) */
case BPF_LDX | BPF_MEM | BPF_W:
case BPF_LDX | BPF_MEM | BPF_H:
ctx->offset[i] = ctx->idx;
ret = build_insn(insn, ctx);
+ if (ret > 0) {
+ i++;
+ continue;
+ }
if (ret)
return ret;
}
void bpf_int_jit_compile(struct bpf_prog *prog)
{
+ struct bpf_binary_header *header;
struct jit_ctx ctx;
int image_size;
+ u8 *image_ptr;
if (!bpf_jit_enable)
return;
/* 1. Initial fake pass to compute ctx->idx. */
- /* Fake pass to fill in ctx->offset. */
+ /* Fake pass to fill in ctx->offset and ctx->tmp_used. */
if (build_body(&ctx))
goto out;
build_prologue(&ctx);
+ ctx.epilogue_offset = ctx.idx;
build_epilogue(&ctx);
/* Now we know the actual image size. */
image_size = sizeof(u32) * ctx.idx;
- ctx.image = module_alloc(image_size);
- if (unlikely(ctx.image == NULL))
+ header = bpf_jit_binary_alloc(image_size, &image_ptr,
+ sizeof(u32), jit_fill_hole);
+ if (header == NULL)
goto out;
/* 2. Now, the actual pass. */
+ ctx.image = (u32 *)image_ptr;
ctx.idx = 0;
+
build_prologue(&ctx);
- ctx.body_offset = ctx.idx;
if (build_body(&ctx)) {
- module_free(NULL, ctx.image);
+ bpf_jit_binary_free(header);
goto out;
}
bpf_jit_dump(prog->len, image_size, 2, ctx.image);
bpf_flush_icache(ctx.image, ctx.image + ctx.idx);
- prog->bpf_func = (void *)ctx.image;
- prog->jited = 1;
+ set_memory_ro((unsigned long)header, header->pages);
+ prog->bpf_func = (void *)ctx.image;
+ prog->jited = true;
out:
kfree(ctx.offset);
}
void bpf_jit_free(struct bpf_prog *prog)
{
- if (prog->jited)
- module_free(NULL, prog->bpf_func);
+ unsigned long addr = (unsigned long)prog->bpf_func & PAGE_MASK;
+ struct bpf_binary_header *header = (void *)addr;
+
+ if (!prog->jited)
+ goto free_filter;
+
+ set_memory_rw(addr, header->pages);
+ bpf_jit_binary_free(header);
- kfree(prog);
+free_filter:
+ bpf_prog_unlock_free(prog);
}
#include <linux/spi/spi.h>
#include <linux/usb/atmel_usba_udc.h>
-#include <mach/atmel-mci.h>
+#include <linux/platform_data/mmc-atmel-mci.h>
#include <linux/atmel-mci.h>
#include <asm/io.h>
+++ /dev/null
-#ifndef __MACH_ATMEL_MCI_H
-#define __MACH_ATMEL_MCI_H
-
-#include <linux/platform_data/dma-dw.h>
-
-/**
- * struct mci_dma_data - DMA data for MCI interface
- */
-struct mci_dma_data {
- struct dw_dma_slave sdata;
-};
-
-/* accessor macros */
-#define slave_data_ptr(s) (&(s)->sdata)
-#define find_slave_dev(s) ((s)->sdata.dma_dev)
-
-#endif /* __MACH_ATMEL_MCI_H */
else
*(volatile unsigned int __force *) addr = b;
}
+#define writeb_relaxed(b, addr) writeb(b, addr)
+#define writew_relaxed(b, addr) writew(b, addr)
+#define writel_relaxed(b, addr) writel(b, addr)
#define __raw_writeb writeb
#define __raw_writew writew
#define __raw_writel writel
__flush_PCI_writes();
}
+#define writeb_relaxed writeb
+#define writew_relaxed writew
+#define writel_relaxed writel
/* Values for nocacheflag and cmode */
#define IOMAP_FULL_CACHING 0
#define writew(v,a) __writew((v), (a))
#define writel(v,a) __writel((v), (a))
#define writeq(v,a) __writeq((v), (a))
+#define writeb_relaxed(v,a) __writeb((v), (a))
+#define writew_relaxed(v,a) __writew((v), (a))
+#define writel_relaxed(v,a) __writel((v), (a))
+#define writeq_relaxed(v,a) __writeq((v), (a))
#define __raw_writeb writeb
#define __raw_writew writew
#define __raw_writel writel
}
#define ARCH_HAS_TRANSLATE_MEM_PTR 1
-static __inline__ char *
-xlate_dev_mem_ptr (unsigned long p)
+static __inline__ void *
+xlate_dev_mem_ptr(phys_addr_t p)
{
struct page *page;
- char * ptr;
+ void *ptr;
page = pfn_to_page(p >> PAGE_SHIFT);
if (PageUncached(page))
- ptr = (char *)p + __IA64_UNCACHED_OFFSET;
+ ptr = (void *)p + __IA64_UNCACHED_OFFSET;
else
ptr = __va(p);
/*
* Convert a virtual cached kernel memory pointer to an uncached pointer
*/
-static __inline__ char *
-xlate_dev_kmem_ptr (char * p)
+static __inline__ void *
+xlate_dev_kmem_ptr(void *p)
{
struct page *page;
- char * ptr;
+ void *ptr;
page = virt_to_page((unsigned long)p);
if (PageUncached(page))
- ptr = (char *)__pa(p) + __IA64_UNCACHED_OFFSET;
+ ptr = (void *)__pa(p) + __IA64_UNCACHED_OFFSET;
else
ptr = p;
{
const char *unit;
unsigned long size;
+ char buf[64];
md = p;
size = md->num_pages << EFI_PAGE_SHIFT;
unit = "KB";
}
- printk("mem%02d: type=%2u, attr=0x%016lx, "
+ printk("mem%02d: %s "
"range=[0x%016lx-0x%016lx) (%4lu%s)\n",
- i, md->type, md->attribute, md->phys_addr,
+ i, efi_md_typeattr_format(buf, sizeof(buf), md),
+ md->phys_addr,
md->phys_addr + efi_md_size(md), size, unit);
}
}
for (i = 0; i < npages; i++) {
pfn = gfn_to_pfn(kvm, base_gfn + i);
- if (!kvm_is_mmio_pfn(pfn)) {
+ if (!kvm_is_reserved_pfn(pfn)) {
kvm_set_pmt_entry(kvm, base_gfn + i,
pfn << PAGE_SHIFT,
_PAGE_AR_RWX | _PAGE_MA_WB);
#define __raw_writeb writeb
#define __raw_writew writew
#define __raw_writel writel
+#define writeb_relaxed writeb
+#define writew_relaxed writew
+#define writel_relaxed writel
#define ioread8 read
#define ioread16 readw
};
#endif /* CONFIG_ATARI_ETHERNEC */
+#ifdef CONFIG_ATARI_SCSI
+static const struct resource atari_scsi_st_rsrc[] __initconst = {
+ {
+ .flags = IORESOURCE_IRQ,
+ .start = IRQ_MFP_FSCSI,
+ .end = IRQ_MFP_FSCSI,
+ },
+};
+
+static const struct resource atari_scsi_tt_rsrc[] __initconst = {
+ {
+ .flags = IORESOURCE_IRQ,
+ .start = IRQ_TT_MFP_SCSI,
+ .end = IRQ_TT_MFP_SCSI,
+ },
+};
+#endif
+
int __init atari_platform_init(void)
{
int rv = 0;
}
#endif
+#ifdef CONFIG_ATARI_SCSI
+ if (ATARIHW_PRESENT(ST_SCSI))
+ platform_device_register_simple("atari_scsi", -1,
+ atari_scsi_st_rsrc, ARRAY_SIZE(atari_scsi_st_rsrc));
+ else if (ATARIHW_PRESENT(TT_SCSI))
+ platform_device_register_simple("atari_scsi", -1,
+ atari_scsi_tt_rsrc, ARRAY_SIZE(atari_scsi_tt_rsrc));
+#endif
+
return rv;
}
/************************* End of Prototypes **************************/
+/**
+ * stdma_try_lock - attempt to acquire ST DMA interrupt "lock"
+ * @handler: interrupt handler to use after acquisition
+ *
+ * Returns !0 if lock was acquired; otherwise 0.
+ */
+
+int stdma_try_lock(irq_handler_t handler, void *data)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ if (stdma_locked) {
+ local_irq_restore(flags);
+ return 0;
+ }
+
+ stdma_locked = 1;
+ stdma_isr = handler;
+ stdma_isr_data = data;
+ local_irq_restore(flags);
+ return 1;
+}
+EXPORT_SYMBOL(stdma_try_lock);
+
/*
* Function: void stdma_lock( isrfunc isr, void *data )
void stdma_lock(irq_handler_t handler, void *data)
{
- unsigned long flags;
-
- local_irq_save(flags); /* protect lock */
-
/* Since the DMA is used for file system purposes, we
have to sleep uninterruptible (there may be locked
buffers) */
- wait_event(stdma_wait, !stdma_locked);
-
- stdma_locked = 1;
- stdma_isr = handler;
- stdma_isr_data = data;
- local_irq_restore(flags);
+ wait_event(stdma_wait, stdma_try_lock(handler, data));
}
EXPORT_SYMBOL(stdma_lock);
EXPORT_SYMBOL(stdma_release);
-/*
- * Function: int stdma_others_waiting( void )
- *
- * Purpose: Check if someone waits for the ST-DMA lock.
- *
- * Inputs: none
- *
- * Returns: 0 if no one is waiting, != 0 otherwise
+/**
+ * stdma_is_locked_by - allow lock holder to check whether it needs to release.
+ * @handler: interrupt handler previously used to acquire lock.
*
+ * Returns !0 if locked for the given handler; 0 otherwise.
*/
-int stdma_others_waiting(void)
+int stdma_is_locked_by(irq_handler_t handler)
{
- return waitqueue_active(&stdma_wait);
+ unsigned long flags;
+ int result;
+
+ local_irq_save(flags);
+ result = stdma_locked && (stdma_isr == handler);
+ local_irq_restore(flags);
+
+ return result;
}
-EXPORT_SYMBOL(stdma_others_waiting);
+EXPORT_SYMBOL(stdma_is_locked_by);
/*
/***************************** Prototypes *****************************/
+int stdma_try_lock(irq_handler_t, void *);
void stdma_lock(irq_handler_t handler, void *data);
void stdma_release( void );
-int stdma_others_waiting( void );
int stdma_islocked( void );
-void *stdma_locked_by( void );
+int stdma_is_locked_by(irq_handler_t);
void stdma_init( void );
/************************* End of Prototypes **************************/
#else
#include <asm/io_mm.h>
#endif
+
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+#define writeb_relaxed(b, addr) writeb(b, addr)
+#define writew_relaxed(b, addr) writew(b, addr)
+#define writel_relaxed(b, addr) writel(b, addr)
#define readl(addr) \
({ unsigned int __v = (*(volatile unsigned int *) (addr)); __v; })
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-
#define writeb(b,addr) (void)((*(volatile unsigned char *) (addr)) = (b))
#define writew(b,addr) (void)((*(volatile unsigned short *) (addr)) = (b))
#define writel(b,addr) (void)((*(volatile unsigned int *) (addr)) = (b))
#define MAC_SCSI_QUADRA 2
#define MAC_SCSI_QUADRA2 3
#define MAC_SCSI_QUADRA3 4
+#define MAC_SCSI_IIFX 5
+#define MAC_SCSI_DUO 6
+#define MAC_SCSI_CCL 7
+#define MAC_SCSI_LATE 8
#define MAC_IDE_NONE 0
#define MAC_IDE_QUADRA 1
#include <uapi/asm/unistd.h>
-#define NR_syscalls 354
+#define NR_syscalls 355
#define __ARCH_WANT_OLD_READDIR
#define __ARCH_WANT_OLD_STAT
#define __NR_renameat2 351
#define __NR_getrandom 352
#define __NR_memfd_create 353
+#define __NR_bpf 354
#endif /* _UAPI_ASM_M68K_UNISTD_H_ */
.long sys_renameat2
.long sys_getrandom
.long sys_memfd_create
+ .long sys_bpf
.name = "IIfx",
.adb_type = MAC_ADB_IOP,
.via_type = MAC_VIA_IICI,
- .scsi_type = MAC_SCSI_OLD,
+ .scsi_type = MAC_SCSI_IIFX,
.scc_type = MAC_SCC_IOP,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_IOP,
.name = "Color Classic",
.adb_type = MAC_ADB_CUDA,
.via_type = MAC_VIA_IICI,
- .scsi_type = MAC_SCSI_OLD,
+ .scsi_type = MAC_SCSI_CCL,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
.name = "Color Classic II",
.adb_type = MAC_ADB_CUDA,
.via_type = MAC_VIA_IICI,
- .scsi_type = MAC_SCSI_OLD,
+ .scsi_type = MAC_SCSI_CCL,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
.name = "Performa 520",
.adb_type = MAC_ADB_CUDA,
.via_type = MAC_VIA_IICI,
- .scsi_type = MAC_SCSI_OLD,
+ .scsi_type = MAC_SCSI_CCL,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
.name = "Performa 550",
.adb_type = MAC_ADB_CUDA,
.via_type = MAC_VIA_IICI,
- .scsi_type = MAC_SCSI_OLD,
+ .scsi_type = MAC_SCSI_CCL,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
.name = "TV",
.adb_type = MAC_ADB_CUDA,
.via_type = MAC_VIA_IICI,
- .scsi_type = MAC_SCSI_OLD,
+ .scsi_type = MAC_SCSI_CCL,
.scc_type = MAC_SCC_II,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
.name = "PowerBook 190",
.adb_type = MAC_ADB_PB2,
.via_type = MAC_VIA_QUADRA,
- .scsi_type = MAC_SCSI_OLD,
+ .scsi_type = MAC_SCSI_LATE,
.ide_type = MAC_IDE_BABOON,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
.name = "PowerBook 520",
.adb_type = MAC_ADB_PB2,
.via_type = MAC_VIA_QUADRA,
- .scsi_type = MAC_SCSI_OLD,
+ .scsi_type = MAC_SCSI_LATE,
.scc_type = MAC_SCC_QUADRA,
.ether_type = MAC_ETHER_SONIC,
.nubus_type = MAC_NUBUS,
.name = "PowerBook Duo 210",
.adb_type = MAC_ADB_PB2,
.via_type = MAC_VIA_IICI,
- .scsi_type = MAC_SCSI_OLD,
+ .scsi_type = MAC_SCSI_DUO,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
.name = "PowerBook Duo 230",
.adb_type = MAC_ADB_PB2,
.via_type = MAC_VIA_IICI,
- .scsi_type = MAC_SCSI_OLD,
+ .scsi_type = MAC_SCSI_DUO,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
.name = "PowerBook Duo 250",
.adb_type = MAC_ADB_PB2,
.via_type = MAC_VIA_IICI,
- .scsi_type = MAC_SCSI_OLD,
+ .scsi_type = MAC_SCSI_DUO,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
.name = "PowerBook Duo 270c",
.adb_type = MAC_ADB_PB2,
.via_type = MAC_VIA_IICI,
- .scsi_type = MAC_SCSI_OLD,
+ .scsi_type = MAC_SCSI_DUO,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
.name = "PowerBook Duo 280",
.adb_type = MAC_ADB_PB2,
.via_type = MAC_VIA_IICI,
- .scsi_type = MAC_SCSI_OLD,
+ .scsi_type = MAC_SCSI_DUO,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
.name = "PowerBook Duo 280c",
.adb_type = MAC_ADB_PB2,
.via_type = MAC_VIA_IICI,
- .scsi_type = MAC_SCSI_OLD,
+ .scsi_type = MAC_SCSI_DUO,
.scc_type = MAC_SCC_QUADRA,
.nubus_type = MAC_NUBUS,
.floppy_type = MAC_FLOPPY_SWIM_ADDR2,
.resource = &swim_rsrc,
};
+static const struct resource mac_scsi_iifx_rsrc[] __initconst = {
+ {
+ .flags = IORESOURCE_IRQ,
+ .start = IRQ_MAC_SCSI,
+ .end = IRQ_MAC_SCSI,
+ }, {
+ .flags = IORESOURCE_MEM,
+ .start = 0x50008000,
+ .end = 0x50009FFF,
+ },
+};
+
+static const struct resource mac_scsi_duo_rsrc[] __initconst = {
+ {
+ .flags = IORESOURCE_MEM,
+ .start = 0xFEE02000,
+ .end = 0xFEE03FFF,
+ },
+};
+
+static const struct resource mac_scsi_old_rsrc[] __initconst = {
+ {
+ .flags = IORESOURCE_IRQ,
+ .start = IRQ_MAC_SCSI,
+ .end = IRQ_MAC_SCSI,
+ }, {
+ .flags = IORESOURCE_MEM,
+ .start = 0x50010000,
+ .end = 0x50011FFF,
+ }, {
+ .flags = IORESOURCE_MEM,
+ .start = 0x50006000,
+ .end = 0x50007FFF,
+ },
+};
+
+static const struct resource mac_scsi_late_rsrc[] __initconst = {
+ {
+ .flags = IORESOURCE_IRQ,
+ .start = IRQ_MAC_SCSI,
+ .end = IRQ_MAC_SCSI,
+ }, {
+ .flags = IORESOURCE_MEM,
+ .start = 0x50010000,
+ .end = 0x50011FFF,
+ },
+};
+
+static const struct resource mac_scsi_ccl_rsrc[] __initconst = {
+ {
+ .flags = IORESOURCE_IRQ,
+ .start = IRQ_MAC_SCSI,
+ .end = IRQ_MAC_SCSI,
+ }, {
+ .flags = IORESOURCE_MEM,
+ .start = 0x50F10000,
+ .end = 0x50F11FFF,
+ }, {
+ .flags = IORESOURCE_MEM,
+ .start = 0x50F06000,
+ .end = 0x50F07FFF,
+ },
+};
+
static struct platform_device esp_0_pdev = {
.name = "mac_esp",
.id = 0,
(macintosh_config->ident == MAC_MODEL_Q950))
platform_device_register(&esp_1_pdev);
break;
+ case MAC_SCSI_IIFX:
+ /* Addresses from The Guide to Mac Family Hardware.
+ * $5000 8000 - $5000 9FFF: SCSI DMA
+ * $5000 C000 - $5000 DFFF: Alternate SCSI (DMA)
+ * $5000 E000 - $5000 FFFF: Alternate SCSI (Hsk)
+ * The SCSI DMA custom IC embeds the 53C80 core. mac_scsi does
+ * not make use of its DMA or hardware handshaking logic.
+ */
+ platform_device_register_simple("mac_scsi", 0,
+ mac_scsi_iifx_rsrc, ARRAY_SIZE(mac_scsi_iifx_rsrc));
+ break;
+ case MAC_SCSI_DUO:
+ /* Addresses from the Duo Dock II Developer Note.
+ * $FEE0 2000 - $FEE0 3FFF: normal mode
+ * $FEE0 4000 - $FEE0 5FFF: pseudo DMA without /DRQ
+ * $FEE0 6000 - $FEE0 7FFF: pseudo DMA with /DRQ
+ * The NetBSD code indicates that both 5380 chips share
+ * an IRQ (?) which would need careful handling (see mac_esp).
+ */
+ platform_device_register_simple("mac_scsi", 1,
+ mac_scsi_duo_rsrc, ARRAY_SIZE(mac_scsi_duo_rsrc));
+ /* fall through */
+ case MAC_SCSI_OLD:
+ /* Addresses from Developer Notes for Duo System,
+ * PowerBook 180 & 160, 140 & 170, Macintosh IIsi
+ * and also from The Guide to Mac Family Hardware for
+ * SE/30, II, IIx, IIcx, IIci.
+ * $5000 6000 - $5000 7FFF: pseudo-DMA with /DRQ
+ * $5001 0000 - $5001 1FFF: normal mode
+ * $5001 2000 - $5001 3FFF: pseudo-DMA without /DRQ
+ * GMFH says that $5000 0000 - $50FF FFFF "wraps
+ * $5000 0000 - $5001 FFFF eight times" (!)
+ * mess.org says IIci and Color Classic do not alias
+ * I/O address space.
+ */
+ platform_device_register_simple("mac_scsi", 0,
+ mac_scsi_old_rsrc, ARRAY_SIZE(mac_scsi_old_rsrc));
+ break;
+ case MAC_SCSI_LATE:
+ /* PDMA logic in 68040 PowerBooks is somehow different to
+ * '030 models. It's probably more like Quadras (see mac_esp).
+ */
+ platform_device_register_simple("mac_scsi", 0,
+ mac_scsi_late_rsrc, ARRAY_SIZE(mac_scsi_late_rsrc));
+ break;
+ case MAC_SCSI_CCL:
+ /* Addresses from the Color Classic Developer Note.
+ * $50F0 6000 - $50F0 7FFF: SCSI handshake
+ * $50F1 0000 - $50F1 1FFF: SCSI
+ * $50F1 2000 - $50F1 3FFF: SCSI DMA
+ */
+ platform_device_register_simple("mac_scsi", 0,
+ mac_scsi_ccl_rsrc, ARRAY_SIZE(mac_scsi_ccl_rsrc));
+ break;
}
/*
high_memory = (void *) end_mem;
empty_zero_page = alloc_bootmem_pages(PAGE_SIZE);
- memset(empty_zero_page, 0, PAGE_SIZE);
/*
* Set up SFC/DFC registers (user data space).
#include <linux/console.h>
#include <linux/init.h>
#include <linux/bootmem.h>
+#include <linux/platform_device.h>
#include <asm/oplib.h>
#include <asm/setup.h>
#include <asm/sun3mmu.h>
#include <asm/rtc.h>
#include <asm/machdep.h>
+#include <asm/machines.h>
#include <asm/idprom.h>
#include <asm/intersil.h>
#include <asm/irq.h>
intersil_clear();
}
+#ifdef CONFIG_SUN3_SCSI
+
+static const struct resource sun3_scsi_vme_rsrc[] __initconst = {
+ {
+ .flags = IORESOURCE_IRQ,
+ .start = SUN3_VEC_VMESCSI0,
+ .end = SUN3_VEC_VMESCSI0,
+ }, {
+ .flags = IORESOURCE_MEM,
+ .start = 0xff200000,
+ .end = 0xff200021,
+ }, {
+ .flags = IORESOURCE_IRQ,
+ .start = SUN3_VEC_VMESCSI1,
+ .end = SUN3_VEC_VMESCSI1,
+ }, {
+ .flags = IORESOURCE_MEM,
+ .start = 0xff204000,
+ .end = 0xff204021,
+ },
+};
+
+/*
+ * Int: level 2 autovector
+ * IO: type 1, base 0x00140000, 5 bits phys space: A<4..0>
+ */
+static const struct resource sun3_scsi_rsrc[] __initconst = {
+ {
+ .flags = IORESOURCE_IRQ,
+ .start = 2,
+ .end = 2,
+ }, {
+ .flags = IORESOURCE_MEM,
+ .start = 0x00140000,
+ .end = 0x0014001f,
+ },
+};
+
+int __init sun3_platform_init(void)
+{
+ switch (idprom->id_machtype) {
+ case SM_SUN3 | SM_3_160:
+ case SM_SUN3 | SM_3_260:
+ platform_device_register_simple("sun3_scsi_vme", -1,
+ sun3_scsi_vme_rsrc, ARRAY_SIZE(sun3_scsi_vme_rsrc));
+ break;
+ case SM_SUN3 | SM_3_50:
+ case SM_SUN3 | SM_3_60:
+ platform_device_register_simple("sun3_scsi", -1,
+ sun3_scsi_rsrc, ARRAY_SIZE(sun3_scsi_rsrc));
+ break;
+ }
+ return 0;
+}
+
+arch_initcall(sun3_platform_init);
+
+#endif
menu "Kernel features"
+config NR_CPUS
+ int
+ default "1"
+
config ADVANCED_OPTIONS
bool "Prompt for advanced kernel configuration options"
help
#include <asm-generic/io.h>
-#define readb_relaxed readb
-#define readw_relaxed readw
-#define readl_relaxed readl
-
-#define writeb_relaxed writeb
-#define writew_relaxed writew
-#define writel_relaxed writel
-
#endif /* _ASM_MICROBLAZE_IO_H */
#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
#include <linux/pagemap.h>
-#include <asm-generic/tlb.h>
#ifdef CONFIG_MMU
#define tlb_start_vma(tlb, vma) do { } while (0)
#define __tlb_remove_tlb_entry(tlb, pte, address) do { } while (0)
#endif
+#include <asm-generic/tlb.h>
+
#endif /* _ASM_MICROBLAZE_TLB_H */
#endif /* __ASSEMBLY__ */
-#define __NR_syscalls 387
+#define __NR_syscalls 388
#endif /* _ASM_MICROBLAZE_UNISTD_H */
#define __NR_seccomp 384
#define __NR_getrandom 385
#define __NR_memfd_create 386
+#define __NR_bpf 387
#endif /* _UAPI_ASM_MICROBLAZE_UNISTD_H */
.long sys_seccomp
.long sys_getrandom /* 385 */
.long sys_memfd_create
+ .long sys_bpf
res = &hose->mem_resources[memno++];
break;
}
- if (res != NULL)
- of_pci_range_to_resource(&range, dev, res);
+ if (res != NULL) {
+ res->name = dev->full_name;
+ res->flags = range.flags;
+ res->start = range.cpu_addr;
+ res->end = range.cpu_addr + range.size - 1;
+ res->parent = res->child = res->sibling = NULL;
+ }
}
/* If there's an ISA hole and the pci_mem_offset is -not- matching
support is unavailable.
config MIPS_CPS_PM
+ depends on MIPS_CPS
select MIPS_CPC
bool
config ARCH_PHYS_ADDR_T_64BIT
def_bool 64BIT_PHYS_ADDR
+choice
+ prompt "SmartMIPS or microMIPS ASE support"
+
+config CPU_NEEDS_NO_SMARTMIPS_OR_MICROMIPS
+ bool "None"
+ help
+ Select this if you want neither microMIPS nor SmartMIPS support
+
config CPU_HAS_SMARTMIPS
depends on SYS_SUPPORTS_SMARTMIPS
- bool "Support for the SmartMIPS ASE"
+ bool "SmartMIPS"
help
SmartMIPS is a extension of the MIPS32 architecture aimed at
increased security at both hardware and software level for
config CPU_MICROMIPS
depends on SYS_SUPPORTS_MICROMIPS
- bool "Build kernel using microMIPS ISA"
+ bool "microMIPS"
help
When this option is enabled the kernel will be built using the
microMIPS ISA
+endchoice
+
config CPU_HAS_MSA
bool "Support for the MIPS SIMD Architecture (EXPERIMENTAL)"
depends on CPU_SUPPORTS_MSA
KBUILD_AFLAGS_MODULE += -mlong-calls
KBUILD_CFLAGS_MODULE += -mlong-calls
+#
+# pass -msoft-float to GAS if it supports it. However on newer binutils
+# (specifically newer than 2.24.51.20140728) we then also need to explicitly
+# set ".set hardfloat" in all files which manipulate floating point registers.
+#
+ifneq ($(call as-option,-Wa$(comma)-msoft-float,),)
+ cflags-y += -DGAS_HAS_SET_HARDFLOAT -Wa,-msoft-float
+endif
+
cflags-y += -ffreestanding
#
ath79_register_pci();
}
#else
-static inline void db120_pci_init(void) {}
+static inline void db120_pci_init(u8 *eeprom) {}
#endif /* CONFIG_PCI */
static void __init db120_setup(void)
.irq_set_type = octeon_irq_ciu_gpio_set_type,
#ifdef CONFIG_SMP
.irq_set_affinity = octeon_irq_ciu_set_affinity_v2,
+ .irq_cpu_offline = octeon_irq_cpu_offline_ciu,
#endif
.flags = IRQCHIP_SET_TYPE_MASKED,
};
.irq_set_type = octeon_irq_ciu_gpio_set_type,
#ifdef CONFIG_SMP
.irq_set_affinity = octeon_irq_ciu_set_affinity,
+ .irq_cpu_offline = octeon_irq_cpu_offline_ciu,
#endif
.flags = IRQCHIP_SET_TYPE_MASKED,
};
#endif
}
- if (octeon_is_simulation()) {
- /*
- * The simulator uses a mtdram device pre filled with
- * the filesystem. Also specify the calibration delay
- * to avoid calculating it every time.
- */
- strcat(arcs_cmdline, " rw root=1f00 slram=root,0x40000000,+1073741824");
- }
-
mips_hpt_frequency = octeon_get_clock_rate();
octeon_init_cvmcount();
#include <asm/mipsregs.h>
.macro fpu_save_single thread tmp=t0
+ .set push
+ SET_HARDFLOAT
cfc1 \tmp, fcr31
swc1 $f0, THREAD_FPR0_LS64(\thread)
swc1 $f1, THREAD_FPR1_LS64(\thread)
swc1 $f30, THREAD_FPR30_LS64(\thread)
swc1 $f31, THREAD_FPR31_LS64(\thread)
sw \tmp, THREAD_FCR31(\thread)
+ .set pop
.endm
.macro fpu_restore_single thread tmp=t0
+ .set push
+ SET_HARDFLOAT
lw \tmp, THREAD_FCR31(\thread)
lwc1 $f0, THREAD_FPR0_LS64(\thread)
lwc1 $f1, THREAD_FPR1_LS64(\thread)
lwc1 $f30, THREAD_FPR30_LS64(\thread)
lwc1 $f31, THREAD_FPR31_LS64(\thread)
ctc1 \tmp, fcr31
+ .set pop
.endm
.macro cpu_save_nonscratch thread
#endif /* CONFIG_CPU_MIPSR2 */
.macro fpu_save_16even thread tmp=t0
+ .set push
+ SET_HARDFLOAT
cfc1 \tmp, fcr31
sdc1 $f0, THREAD_FPR0_LS64(\thread)
sdc1 $f2, THREAD_FPR2_LS64(\thread)
sdc1 $f28, THREAD_FPR28_LS64(\thread)
sdc1 $f30, THREAD_FPR30_LS64(\thread)
sw \tmp, THREAD_FCR31(\thread)
+ .set pop
.endm
.macro fpu_save_16odd thread
.set push
.set mips64r2
+ SET_HARDFLOAT
sdc1 $f1, THREAD_FPR1_LS64(\thread)
sdc1 $f3, THREAD_FPR3_LS64(\thread)
sdc1 $f5, THREAD_FPR5_LS64(\thread)
.endm
.macro fpu_restore_16even thread tmp=t0
+ .set push
+ SET_HARDFLOAT
lw \tmp, THREAD_FCR31(\thread)
ldc1 $f0, THREAD_FPR0_LS64(\thread)
ldc1 $f2, THREAD_FPR2_LS64(\thread)
.macro fpu_restore_16odd thread
.set push
.set mips64r2
+ SET_HARDFLOAT
ldc1 $f1, THREAD_FPR1_LS64(\thread)
ldc1 $f3, THREAD_FPR3_LS64(\thread)
ldc1 $f5, THREAD_FPR5_LS64(\thread)
.macro cfcmsa rd, cs
.set push
.set noat
+ SET_HARDFLOAT
.insn
.word CFC_MSA_INSN | (\cs << 11)
move \rd, $1
.macro ctcmsa cd, rs
.set push
.set noat
+ SET_HARDFLOAT
move $1, \rs
.word CTC_MSA_INSN | (\cd << 6)
.set pop
.macro ld_d wd, off, base
.set push
.set noat
+ SET_HARDFLOAT
add $1, \base, \off
.word LDD_MSA_INSN | (\wd << 6)
.set pop
.macro st_d wd, off, base
.set push
.set noat
+ SET_HARDFLOAT
add $1, \base, \off
.word STD_MSA_INSN | (\wd << 6)
.set pop
.macro copy_u_w rd, ws, n
.set push
.set noat
+ SET_HARDFLOAT
.insn
.word COPY_UW_MSA_INSN | (\n << 16) | (\ws << 11)
/* move triggers an assembler bug... */
.macro copy_u_d rd, ws, n
.set push
.set noat
+ SET_HARDFLOAT
.insn
.word COPY_UD_MSA_INSN | (\n << 16) | (\ws << 11)
/* move triggers an assembler bug... */
.macro insert_w wd, n, rs
.set push
.set noat
+ SET_HARDFLOAT
/* move triggers an assembler bug... */
or $1, \rs, zero
.word INSERT_W_MSA_INSN | (\n << 16) | (\wd << 6)
.macro insert_d wd, n, rs
.set push
.set noat
+ SET_HARDFLOAT
/* move triggers an assembler bug... */
or $1, \rs, zero
.word INSERT_D_MSA_INSN | (\n << 16) | (\wd << 6)
st_d 31, THREAD_FPR31, \thread
.set push
.set noat
+ SET_HARDFLOAT
cfcmsa $1, MSA_CSR
sw $1, THREAD_MSA_CSR(\thread)
.set pop
.macro msa_restore_all thread
.set push
.set noat
+ SET_HARDFLOAT
lw $1, THREAD_MSA_CSR(\thread)
ctcmsa MSA_CSR, $1
.set pop
.macro msa_init_all_upper
.set push
.set noat
+ SET_HARDFLOAT
not $1, zero
msa_init_upper 0
.set pop
#define cop2_present 1
#define cop2_lazy_restore 1
-#define cop2_save(r) do { (r); } while (0)
-#define cop2_restore(r) do { (r); } while (0)
+#define cop2_save(r) do { (void)(r); } while (0)
+#define cop2_restore(r) do { (void)(r); } while (0)
#else
#define cop2_present 0
#define cop2_lazy_restore 0
-#define cop2_save(r) do { (r); } while (0)
-#define cop2_restore(r) do { (r); } while (0)
+#define cop2_save(r) do { (void)(r); } while (0)
+#define cop2_restore(r) do { (void)(r); } while (0)
#endif
enum cu2_ops {
#include <asm/sgidefs.h>
+/*
+ * starting with binutils 2.24.51.20140729, MIPS binutils warn about mixing
+ * hardfloat and softfloat object files. The kernel build uses soft-float by
+ * default, so we also need to pass -msoft-float along to GAS if it supports it.
+ * But this in turn causes assembler errors in files which access hardfloat
+ * registers. We detect if GAS supports "-msoft-float" in the Makefile and
+ * explicitly put ".set hardfloat" where floating point registers are touched.
+ */
+#ifdef GAS_HAS_SET_HARDFLOAT
+#define SET_HARDFLOAT .set hardfloat
+#else
+#define SET_HARDFLOAT
+#endif
+
#if _MIPS_SIM == _MIPS_SIM_ABI32
/*
if (is_msa_enabled()) {
if (save) {
save_msa(current);
- asm volatile("cfc1 %0, $31"
- : "=r"(current->thread.fpu.fcr31));
+ current->thread.fpu.fcr31 =
+ read_32bit_cp1_register(CP1_STATUS);
}
disable_msa();
clear_thread_flag(TIF_USEDMSA);
asm volatile ( \
"1: " load " %[tmp_dst], 0(%[tmp_src])\n" \
" li %[tmp_err], 0\n" \
- "2:\n" \
+ "2: .insn\n" \
\
".section .fixup, \"ax\"\n" \
"3: li %[tmp_err], 1\n" \
asm volatile ( \
"1: " store " %[tmp_src], 0(%[tmp_dst])\n"\
" li %[tmp_err], 0\n" \
- "2:\n" \
+ "2: .insn\n" \
\
".section .fixup, \"ax\"\n" \
"3: li %[tmp_err], 1\n" \
extern void r4k_wait(void);
extern asmlinkage void __r4k_wait(void);
extern void r4k_wait_irqoff(void);
-extern void __pastwait(void);
static inline int using_rollback_handler(void)
{
return cpu_wait == r4k_wait;
}
-static inline int address_is_in_r4k_wait_irqoff(unsigned long addr)
-{
- return addr >= (unsigned long)r4k_wait_irqoff &&
- addr < (unsigned long)__pastwait;
-}
-
extern int mips_cpuidle_wait_enter(struct cpuidle_device *dev,
struct cpuidle_driver *drv, int index);
#define WORD_INSN ".word"
#endif
+#ifdef CONFIG_CPU_MICROMIPS
+#define NOP_INSN "nop32"
+#else
+#define NOP_INSN "nop"
+#endif
+
static __always_inline bool arch_static_branch(struct static_key *key)
{
- asm_volatile_goto("1:\tnop\n\t"
+ asm_volatile_goto("1:\t" NOP_INSN "\n\t"
"nop\n\t"
".pushsection __jump_table, \"aw\"\n\t"
WORD_INSN " 1b, %l[l_yes], %0\n\t"
#define cpu_has_mcheck 0
#define cpu_has_mdmx 0
#define cpu_has_mips16 0
-#define cpu_has_mips32r1 0
#define cpu_has_mips32r2 0
#define cpu_has_mips3d 0
-#define cpu_has_mips64r1 0
#define cpu_has_mips64r2 0
#define cpu_has_mipsmt 0
#define cpu_has_prefetch 0
#define MIPS_CONF6_SYND (_ULCAST_(1) << 13)
/* proAptiv FTLB on/off bit */
#define MIPS_CONF6_FTLBEN (_ULCAST_(1) << 15)
+/* FTLB probability bits */
+#define MIPS_CONF6_FTLBP_SHIFT (16)
#define MIPS_CONF7_WII (_ULCAST_(1) << 31)
/*
* Macros to access the floating point coprocessor control registers
*/
-#define read_32bit_cp1_register(source) \
+#define _read_32bit_cp1_register(source, gas_hardfloat) \
({ \
int __res; \
\
" # gas fails to assemble cfc1 for some archs, \n" \
" # like Octeon. \n" \
" .set mips1 \n" \
+ " "STR(gas_hardfloat)" \n" \
" cfc1 %0,"STR(source)" \n" \
" .set pop \n" \
: "=r" (__res)); \
__res; \
})
+#ifdef GAS_HAS_SET_HARDFLOAT
+#define read_32bit_cp1_register(source) \
+ _read_32bit_cp1_register(source, .set hardfloat)
+#else
+#define read_32bit_cp1_register(source) \
+ _read_32bit_cp1_register(source, )
+#endif
+
#ifdef HAVE_AS_DSP
#define rddsp(mask) \
({ \
*/
static inline void protected_writeback_dcache_line(unsigned long addr)
{
+#ifdef CONFIG_EVA
+ protected_cachee_op(Hit_Writeback_Inv_D, addr);
+#else
protected_cache_op(Hit_Writeback_Inv_D, addr);
+#endif
}
static inline void protected_writeback_scache_line(unsigned long addr)
__get_kernel_common((x), size, __gu_ptr); \
else \
__get_user_common((x), size, __gu_ptr); \
- } \
+ } else \
+ (x) = 0; \
\
__gu_err; \
})
" .insn \n" \
" .section .fixup,\"ax\" \n" \
"3: li %0, %4 \n" \
+ " move %1, $0 \n" \
" j 2b \n" \
" .previous \n" \
" .section __ex_table,\"a\" \n" \
" .insn \n" \
" .section .fixup,\"ax\" \n" \
"3: li %0, %4 \n" \
+ " move %1, $0 \n" \
" j 2b \n" \
" .previous \n" \
" .section __ex_table,\"a\" \n" \
"jal\t" #destination "\n\t"
#endif
-#ifndef CONFIG_CPU_DADDI_WORKAROUNDS
-#define DADDI_SCRATCH "$0"
-#else
+#if defined(CONFIG_CPU_DADDI_WORKAROUNDS) || (defined(CONFIG_EVA) && \
+ defined(CONFIG_CPU_HAS_PREFETCH))
#define DADDI_SCRATCH "$3"
+#else
+#define DADDI_SCRATCH "$0"
#endif
extern size_t __copy_user(void *__to, const void *__from, size_t __n);
}
/*
- * strlen_user: - Get the size of a string in user space.
+ * strnlen_user: - Get the size of a string in user space.
* @str: The string to measure.
*
* Context: User context only. This function may sleep.
*
* Returns the size of the string INCLUDING the terminating NUL.
* On exception, returns 0.
- *
- * If there is a limit on the length of a valid string, you may wish to
- * consider using strnlen_user() instead.
+ * If the string is too long, returns a value greater than @n.
*/
static inline long strnlen_user(const char __user *s, long n)
{
#ifndef _UAPI_ASM_PTRACE_H
#define _UAPI_ASM_PTRACE_H
+#include <linux/types.h>
+
/* 0 - 31 are integer registers, 32 - 63 are fp registers. */
#define FPR_BASE 32
#define PC 64
#define __NR_seccomp (__NR_Linux + 352)
#define __NR_getrandom (__NR_Linux + 353)
#define __NR_memfd_create (__NR_Linux + 354)
+#define __NR_bpf (__NR_Linux + 355)
/*
* Offset of the last Linux o32 flavoured syscall
*/
-#define __NR_Linux_syscalls 354
+#define __NR_Linux_syscalls 355
#endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */
#define __NR_O32_Linux 4000
-#define __NR_O32_Linux_syscalls 354
+#define __NR_O32_Linux_syscalls 355
#if _MIPS_SIM == _MIPS_SIM_ABI64
#define __NR_seccomp (__NR_Linux + 312)
#define __NR_getrandom (__NR_Linux + 313)
#define __NR_memfd_create (__NR_Linux + 314)
+#define __NR_bpf (__NR_Linux + 315)
/*
* Offset of the last Linux 64-bit flavoured syscall
*/
-#define __NR_Linux_syscalls 314
+#define __NR_Linux_syscalls 315
#endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */
#define __NR_64_Linux 5000
-#define __NR_64_Linux_syscalls 314
+#define __NR_64_Linux_syscalls 315
#if _MIPS_SIM == _MIPS_SIM_NABI32
#define __NR_seccomp (__NR_Linux + 316)
#define __NR_getrandom (__NR_Linux + 317)
#define __NR_memfd_create (__NR_Linux + 318)
+#define __NR_bpf (__NR_Linux + 319)
/*
* Offset of the last N32 flavoured syscall
*/
-#define __NR_Linux_syscalls 318
+#define __NR_Linux_syscalls 319
#endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */
#define __NR_N32_Linux 6000
-#define __NR_N32_Linux_syscalls 318
+#define __NR_N32_Linux_syscalls 319
#endif /* _UAPI_ASM_UNISTD_H */
END(bmips_reset_nmi_vec)
.set pop
- .previous
/***********************************************************************
* CPU1 warm restart vector (used for second and subsequent boots).
jr ra
END(bmips_enable_xks01)
-
- .previous
case mm_bc1t_op:
preempt_disable();
if (is_fpu_owner())
- asm volatile("cfc1\t%0,$31" : "=r" (fcr31));
+ fcr31 = read_32bit_cp1_register(CP1_STATUS);
else
fcr31 = current->thread.fpu.fcr31;
preempt_enable();
case cop1_op:
preempt_disable();
if (is_fpu_owner())
- asm volatile(
- ".set push\n"
- "\t.set mips1\n"
- "\tcfc1\t%0,$31\n"
- "\t.set pop" : "=r" (fcr31));
+ fcr31 = read_32bit_cp1_register(CP1_STATUS);
else
fcr31 = current->thread.fpu.fcr31;
preempt_enable();
nop
.set push
+ .set mips32r2
.set mt
/* Only allow 1 TC per VPE to execute... */
nop
.set push
+ .set mips32r2
.set mt
1: /* Enter VPE configuration state */
static char unknown_isa[] = KERN_ERR \
"Unsupported ISA type, c0.config0: %d.";
+static unsigned int calculate_ftlb_probability(struct cpuinfo_mips *c)
+{
+
+ unsigned int probability = c->tlbsize / c->tlbsizevtlb;
+
+ /*
+ * 0 = All TLBWR instructions go to FTLB
+ * 1 = 15:1: For every 16 TBLWR instructions, 15 go to the
+ * FTLB and 1 goes to the VTLB.
+ * 2 = 7:1: As above with 7:1 ratio.
+ * 3 = 3:1: As above with 3:1 ratio.
+ *
+ * Use the linear midpoint as the probability threshold.
+ */
+ if (probability >= 12)
+ return 1;
+ else if (probability >= 6)
+ return 2;
+ else
+ /*
+ * So FTLB is less than 4 times bigger than VTLB.
+ * A 3:1 ratio can still be useful though.
+ */
+ return 3;
+}
+
static void set_ftlb_enable(struct cpuinfo_mips *c, int enable)
{
unsigned int config6;
case CPU_P5600:
/* proAptiv & related cores use Config6 to enable the FTLB */
config6 = read_c0_config6();
+ /* Clear the old probability value */
+ config6 &= ~(3 << MIPS_CONF6_FTLBP_SHIFT);
if (enable)
/* Enable FTLB */
- write_c0_config6(config6 | MIPS_CONF6_FTLBEN);
+ write_c0_config6(config6 |
+ (calculate_ftlb_probability(c)
+ << MIPS_CONF6_FTLBP_SHIFT)
+ | MIPS_CONF6_FTLBEN);
else
/* Disable FTLB */
write_c0_config6(config6 & ~MIPS_CONF6_FTLBEN);
c->cputype = CPU_LOONGSON2;
__cpu_name[cpu] = "ICT Loongson-2";
set_elf_platform(cpu, "loongson2e");
+ set_isa(c, MIPS_CPU_ISA_III);
break;
case PRID_REV_LOONGSON2F:
c->cputype = CPU_LOONGSON2;
__cpu_name[cpu] = "ICT Loongson-2";
set_elf_platform(cpu, "loongson2f");
+ set_isa(c, MIPS_CPU_ISA_III);
break;
case PRID_REV_LOONGSON3A:
c->cputype = CPU_LOONGSON3;
- c->writecombine = _CACHE_UNCACHED_ACCELERATED;
__cpu_name[cpu] = "ICT Loongson-3";
set_elf_platform(cpu, "loongson3a");
+ set_isa(c, MIPS_CPU_ISA_M64R1);
break;
case PRID_REV_LOONGSON3B_R1:
case PRID_REV_LOONGSON3B_R2:
c->cputype = CPU_LOONGSON3;
__cpu_name[cpu] = "ICT Loongson-3";
set_elf_platform(cpu, "loongson3b");
+ set_isa(c, MIPS_CPU_ISA_M64R1);
break;
}
- set_isa(c, MIPS_CPU_ISA_III);
c->options = R4K_OPTS |
MIPS_CPU_FPU | MIPS_CPU_LLSC |
MIPS_CPU_32FPR;
c->tlbsize = 64;
+ c->writecombine = _CACHE_UNCACHED_ACCELERATED;
break;
case PRID_IMP_LOONGSON_32: /* Loongson-1 */
decode_configs(c);
.set push
/* gas fails to assemble cfc1 for some archs (octeon).*/ \
.set mips1
+ SET_HARDFLOAT
cfc1 a1, fcr31
li a2, ~(0x3f << 12)
and a2, a1
" wait \n"
" .set pop \n");
local_irq_enable();
- __asm__(
- " .globl __pastwait \n"
- "__pastwait: \n");
}
/*
#ifdef HAVE_JUMP_LABEL
-#define J_RANGE_MASK ((1ul << 28) - 1)
+/*
+ * Define parameters for the standard MIPS and the microMIPS jump
+ * instruction encoding respectively:
+ *
+ * - the ISA bit of the target, either 0 or 1 respectively,
+ *
+ * - the amount the jump target address is shifted right to fit in the
+ * immediate field of the machine instruction, either 2 or 1,
+ *
+ * - the mask determining the size of the jump region relative to the
+ * delay-slot instruction, either 256MB or 128MB,
+ *
+ * - the jump target alignment, either 4 or 2 bytes.
+ */
+#define J_ISA_BIT IS_ENABLED(CONFIG_CPU_MICROMIPS)
+#define J_RANGE_SHIFT (2 - J_ISA_BIT)
+#define J_RANGE_MASK ((1ul << (26 + J_RANGE_SHIFT)) - 1)
+#define J_ALIGN_MASK ((1ul << J_RANGE_SHIFT) - 1)
void arch_jump_label_transform(struct jump_entry *e,
enum jump_label_type type)
{
+ union mips_instruction *insn_p;
union mips_instruction insn;
- union mips_instruction *insn_p =
- (union mips_instruction *)(unsigned long)e->code;
- /* Jump only works within a 256MB aligned region. */
- BUG_ON((e->target & ~J_RANGE_MASK) != (e->code & ~J_RANGE_MASK));
+ insn_p = (union mips_instruction *)msk_isa16_mode(e->code);
+
+ /* Jump only works within an aligned region its delay slot is in. */
+ BUG_ON((e->target & ~J_RANGE_MASK) != ((e->code + 4) & ~J_RANGE_MASK));
- /* Target must have 4 byte alignment. */
- BUG_ON((e->target & 3) != 0);
+ /* Target must have the right alignment and ISA must be preserved. */
+ BUG_ON((e->target & J_ALIGN_MASK) != J_ISA_BIT);
if (type == JUMP_LABEL_ENABLE) {
- insn.j_format.opcode = j_op;
- insn.j_format.target = (e->target & J_RANGE_MASK) >> 2;
+ insn.j_format.opcode = J_ISA_BIT ? mm_j32_op : j_op;
+ insn.j_format.target = e->target >> J_RANGE_SHIFT;
} else {
insn.word = 0; /* nop */
}
get_online_cpus();
mutex_lock(&text_mutex);
- *insn_p = insn;
+ if (IS_ENABLED(CONFIG_CPU_MICROMIPS)) {
+ insn_p->halfword[0] = insn.word >> 16;
+ insn_p->halfword[1] = insn.word;
+ } else
+ *insn_p = insn;
flush_icache_range((unsigned long)insn_p,
(unsigned long)insn_p + sizeof(*insn_p));
.set mips1
/* Save floating point context */
LEAF(_save_fp_context)
+ .set push
+ SET_HARDFLOAT
li v0, 0 # assume success
cfc1 t1,fcr31
EX(swc1 $f0,(SC_FPREGS+0)(a0))
EX(sw t1,(SC_FPC_CSR)(a0))
cfc1 t0,$0 # implementation/version
jr ra
+ .set pop
.set nomacro
EX(sw t0,(SC_FPC_EIR)(a0))
.set macro
* stack frame which might have been changed by the user.
*/
LEAF(_restore_fp_context)
+ .set push
+ SET_HARDFLOAT
li v0, 0 # assume success
EX(lw t0,(SC_FPC_CSR)(a0))
EX(lwc1 $f0,(SC_FPREGS+0)(a0))
EX(lwc1 $f31,(SC_FPREGS+248)(a0))
jr ra
ctc1 t0,fcr31
+ .set pop
END(_restore_fp_context)
.set reorder
#define FPU_DEFAULT 0x00000000
+ .set push
+ SET_HARDFLOAT
+
LEAF(_init_fpu)
mfc0 t0, CP0_STATUS
li t1, ST0_CU1
mtc1 t0, $f31
jr ra
END(_init_fpu)
+
+ .set pop
#include <asm/asm-offsets.h>
#include <asm/regdef.h>
+/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */
+#undef fp
+
.macro EX insn, reg, src
.set push
+ SET_HARDFLOAT
.set nomacro
.ex\@: \insn \reg, \src
.set pop
.set arch=r4000
LEAF(_save_fp_context)
+ .set push
+ SET_HARDFLOAT
cfc1 t1, fcr31
+ .set pop
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2)
.set push
+ SET_HARDFLOAT
#ifdef CONFIG_CPU_MIPS32_R2
- .set mips64r2
+ .set mips32r2
+ .set fp=64
mfc0 t0, CP0_STATUS
sll t0, t0, 5
bgez t0, 1f # skip storing odd if FR=0
1: .set pop
#endif
+ .set push
+ SET_HARDFLOAT
/* Store the 16 even double precision registers */
EX sdc1 $f0, SC_FPREGS+0(a0)
EX sdc1 $f2, SC_FPREGS+16(a0)
EX sw t1, SC_FPC_CSR(a0)
jr ra
li v0, 0 # success
+ .set pop
END(_save_fp_context)
#ifdef CONFIG_MIPS32_COMPAT
/* Save 32-bit process floating point context */
LEAF(_save_fp_context32)
+ .set push
+ SET_HARDFLOAT
cfc1 t1, fcr31
mfc0 t0, CP0_STATUS
EX sw t1, SC32_FPC_CSR(a0)
cfc1 t0, $0 # implementation/version
EX sw t0, SC32_FPC_EIR(a0)
+ .set pop
jr ra
li v0, 0 # success
#if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2)
.set push
+ SET_HARDFLOAT
#ifdef CONFIG_CPU_MIPS32_R2
- .set mips64r2
+ .set mips32r2
+ .set fp=64
mfc0 t0, CP0_STATUS
sll t0, t0, 5
bgez t0, 1f # skip loading odd if FR=0
EX ldc1 $f31, SC_FPREGS+248(a0)
1: .set pop
#endif
+ .set push
+ SET_HARDFLOAT
EX ldc1 $f0, SC_FPREGS+0(a0)
EX ldc1 $f2, SC_FPREGS+16(a0)
EX ldc1 $f4, SC_FPREGS+32(a0)
EX ldc1 $f28, SC_FPREGS+224(a0)
EX ldc1 $f30, SC_FPREGS+240(a0)
ctc1 t1, fcr31
+ .set pop
jr ra
li v0, 0 # success
END(_restore_fp_context)
#ifdef CONFIG_MIPS32_COMPAT
LEAF(_restore_fp_context32)
/* Restore an o32 sigcontext. */
+ .set push
+ SET_HARDFLOAT
EX lw t1, SC32_FPC_CSR(a0)
mfc0 t0, CP0_STATUS
ctc1 t1, fcr31
jr ra
li v0, 0 # success
+ .set pop
END(_restore_fp_context32)
#endif
#include <asm/asmmacro.h>
+/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */
+#undef fp
+
/*
* Offset to the current process status flags, the first 32 bytes of the
* stack are not used.
bgtz a3, 1f
/* Save 128b MSA vector context + scalar FP control & status. */
+ .set push
+ SET_HARDFLOAT
cfc1 t1, fcr31
msa_save_all a0
+ .set pop /* SET_HARDFLOAT */
+
sw t1, THREAD_FCR31(a0)
b 2f
#define FPU_DEFAULT 0x00000000
+ .set push
+ SET_HARDFLOAT
+
LEAF(_init_fpu)
mfc0 t0, CP0_STATUS
li t1, ST0_CU1
#ifdef CONFIG_CPU_MIPS32_R2
.set push
- .set mips64r2
+ .set mips32r2
+ .set fp=64
sll t0, t0, 5 # is Status.FR set?
bgez t0, 1f # no: skip setting upper 32b
#endif
jr ra
END(_init_fpu)
+
+ .set pop /* SET_HARDFLOAT */
.set noreorder
.set mips2
+ .set push
+ SET_HARDFLOAT
+
/* Save floating point context */
LEAF(_save_fp_context)
mfc0 t0,CP0_STATUS
1: jr ra
nop
END(_restore_fp_context)
+
+ .set pop /* SET_HARDFLOAT */
int ret = 0;
if (index >= RTLX_CHANNELS) {
- pr_debug(KERN_DEBUG "rtlx_open index out of range\n");
+ pr_debug("rtlx_open index out of range\n");
return -ENOSYS;
}
if (atomic_inc_return(&channel_wqs[index].in_open) > 1) {
- pr_debug(KERN_DEBUG "rtlx_open channel %d already opened\n", index);
+ pr_debug("rtlx_open channel %d already opened\n", index);
ret = -EBUSY;
goto out_fail;
}
PTR sys_seccomp
PTR sys_getrandom
PTR sys_memfd_create
+ PTR sys_bpf /* 4355 */
PTR sys_seccomp
PTR sys_getrandom
PTR sys_memfd_create
+ PTR sys_bpf /* 5315 */
.size sys_call_table,.-sys_call_table
PTR sys_seccomp
PTR sys_getrandom
PTR sys_memfd_create
+ PTR sys_bpf
.size sysn32_call_table,.-sysn32_call_table
PTR sys_seccomp
PTR sys_getrandom
PTR sys_memfd_create
+ PTR sys_bpf /* 4355 */
.size sys32_call_table,.-sys32_call_table
* NOTE: historically plat_mem_setup did the entire platform initialization.
* This was rather impractical because it meant plat_mem_setup had to
* get away without any kind of memory allocator. To keep old code from
- * breaking plat_setup was just renamed to plat_setup and a second platform
+ * breaking plat_setup was just renamed to plat_mem_setup and a second platform
* initialization hook for anything else was introduced.
*/
static int __init early_parse_mem(char *p)
{
- unsigned long start, size;
+ phys_t start, size;
/*
* If a user specifies memory size, we
dma_contiguous_reserve(PFN_PHYS(max_low_pfn));
/* Tell bootmem about cma reserved memblock section */
for_each_memblock(reserved, reg)
- reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT);
+ if (reg->size != 0)
+ reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT);
}
static void __init resource_init(void)
save_fp_context = _save_fp_context;
restore_fp_context = _restore_fp_context;
} else {
- save_fp_context = copy_fp_from_sigcontext;
- restore_fp_context = copy_fp_to_sigcontext;
+ save_fp_context = copy_fp_to_sigcontext;
+ restore_fp_context = copy_fp_from_sigcontext;
}
#endif /* CONFIG_SMP */
#else
- save_fp_context = copy_fp_from_sigcontext;;
- restore_fp_context = copy_fp_to_sigcontext;
+ save_fp_context = copy_fp_to_sigcontext;
+ restore_fp_context = copy_fp_from_sigcontext;
#endif
return 0;
config PICVUE_PROC
tristate "PICVUE LCD display driver /proc interface"
- depends on PICVUE
+ depends on PICVUE && PROC_FS
config DS1603
bool "DS1603 RTC driver"
STOREB(t0, NBYTES-2(dst), .Ls_exc_p1\@)
.Ldone\@:
jr ra
+ nop
.if __memcpy == 1
END(memcpy)
.set __memcpy, 0
entrylo0 = read_c0_entrylo0();
/* Unused entries have a virtual address of KSEG0. */
- if ((entryhi & 0xffffe000) != 0x80000000
+ if ((entryhi & 0xfffff000) != 0x80000000
&& (entryhi & 0xfc0) == asid) {
/*
* Only print entries in use
printk("va=%08lx asid=%08lx"
" [pa=%06lx n=%d d=%d v=%d g=%d]",
- (entryhi & 0xffffe000),
+ (entryhi & 0xfffff000),
entryhi & 0xfc0,
entrylo0 & PAGE_MASK,
(entrylo0 & (1 << 11)) ? 1 : 0,
.else
EX(lbe, t0, (v0), .Lfault\@)
.endif
- PTR_ADDIU v0, 1
+ .set noreorder
bnez t0, 1b
-1: PTR_SUBU v0, a0
+1: PTR_ADDIU v0, 1
+ .set reorder
+ PTR_SUBU v0, a0
jr ra
END(__strnlen_\func\()_asm)
# Serial port support
#
obj-$(CONFIG_EARLY_PRINTK) += early_printk.o
-obj-$(CONFIG_SERIAL_8250) += serial.o
+loongson-serial-$(CONFIG_SERIAL_8250) := serial.o
+obj-y += $(loongson-serial-m) $(loongson-serial-y)
obj-$(CONFIG_LOONGSON_UART_BASE) += uart_base.o
obj-$(CONFIG_LOONGSON_MC146818) += rtc.o
int clk_set_rate(struct clk *clk, unsigned long rate)
{
+ unsigned int rate_khz = rate / 1000;
struct cpufreq_frequency_table *pos;
int ret = 0;
int regval;
propagate_rate(clk);
cpufreq_for_each_valid_entry(pos, loongson2_clockmod_table)
- if (rate == pos->frequency)
+ if (rate_khz == pos->frequency)
break;
- if (rate != pos->frequency)
+ if (rate_khz != pos->frequency)
return -ENOTSUPP;
clk->rate = rate;
static struct node_data prealloc__node_data[MAX_NUMNODES];
unsigned char __node_distances[MAX_NUMNODES][MAX_NUMNODES];
+EXPORT_SYMBOL(__node_distances);
struct node_data *__node_data[MAX_NUMNODES];
EXPORT_SYMBOL(__node_data);
if (insn.i_format.rs == bc_op) {
preempt_disable();
if (is_fpu_owner())
- asm volatile(
- ".set push\n"
- "\t.set mips1\n"
- "\tcfc1\t%0,$31\n"
- "\t.set pop" : "=r" (fcr31));
+ fcr31 = read_32bit_cp1_register(CP1_STATUS);
else
fcr31 = current->thread.fpu.fcr31;
preempt_enable();
goto emul;
case cop1x_op:
- if (cpu_has_mips_4_5 || cpu_has_mips64)
+ if (cpu_has_mips_4_5 || cpu_has_mips64 || cpu_has_mips32r2)
/* its one of ours */
goto emul;
break;
case cop1x_op:
- if (!cpu_has_mips_4_5 && !cpu_has_mips64)
+ if (!cpu_has_mips_4_5 && !cpu_has_mips64 && !cpu_has_mips32r2)
return SIGILL;
sig = fpux_emu(xcp, ctx, ir, fault_addr);
local_irq_save(flags);
+ htw_stop();
pid = read_c0_entryhi() & ASID_MASK;
address &= (PAGE_MASK << 1);
write_c0_entryhi(address | pid);
tlb_write_indexed();
}
tlbw_use_hazard();
+ htw_start();
flush_itlb_vm(vma);
local_irq_restore(flags);
}
local_irq_save(flags);
/* Save old context and create impossible VPN2 value */
+ htw_stop();
old_ctx = read_c0_entryhi();
old_pagemask = read_c0_pagemask();
wired = read_c0_wired();
write_c0_entryhi(old_ctx);
write_c0_pagemask(old_pagemask);
+ htw_start();
out:
local_irq_restore(flags);
return ret;
struct mips_huge_tlb_info {
int huge_pte;
int restore_scratch;
+ bool need_reload_pte;
};
static struct mips_huge_tlb_info
rv.huge_pte = scratch;
rv.restore_scratch = 0;
+ rv.need_reload_pte = false;
if (check_for_high_segbits) {
UASM_i_MFC0(p, tmp, C0_BADVADDR);
} else {
htlb_info.huge_pte = K0;
htlb_info.restore_scratch = 0;
+ htlb_info.need_reload_pte = true;
vmalloc_mode = refill_noscratch;
/*
* create the plain linear handler
}
#ifdef CONFIG_MIPS_HUGE_TLB_SUPPORT
uasm_l_tlb_huge_update(&l, p);
- UASM_i_LW(&p, K0, 0, K1);
+ if (htlb_info.need_reload_pte)
+ UASM_i_LW(&p, htlb_info.huge_pte, 0, K1);
build_huge_update_entries(&p, htlb_info.huge_pte, K1);
build_huge_tlb_write_entry(&p, &l, &r, K0, tlb_random,
htlb_info.restore_scratch);
uasm_l_smp_pgtable_change(l, *p);
#endif
iPTE_LW(p, wr.r1, wr.r2); /* get even pte */
- if (!m4kc_tlbp_war())
+ if (!m4kc_tlbp_war()) {
build_tlb_probe_entry(p);
+ if (cpu_has_htw) {
+ /* race condition happens, leaving */
+ uasm_i_ehb(p);
+ uasm_i_mfc0(p, wr.r3, C0_INDEX);
+ uasm_il_bltz(p, r, wr.r3, label_leave);
+ uasm_i_nop(p);
+ }
+ }
return wr;
}
# Copyright (C) 2008 Wind River Systems, Inc.
# written by Ralf Baechle <ralf@linux-mips.org>
#
-obj-y := malta-amon.o malta-display.o malta-init.o \
+obj-y := malta-display.o malta-init.o \
malta-int.o malta-memory.o malta-platform.o \
malta-reset.o malta-setup.o malta-time.o
+obj-$(CONFIG_MIPS_CMP) += malta-amon.o
obj-$(CONFIG_MIPS_MALTA_PM) += malta-pm.o
sead3-setup.o sead3-time.o
obj-y += sead3-i2c-dev.o sead3-i2c.o \
- sead3-pic32-i2c-drv.o sead3-pic32-bus.o \
leds-sead3.o sead3-leds.o
obj-$(CONFIG_EARLY_PRINTK) += sead3-console.o
*
* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
*/
-#include <linux/module.h>
#include <linux/init.h>
#include <linux/platform_device.h>
-#include <irq.h>
struct resource sead3_i2c_resources[] = {
{
return platform_device_register(&sead3_i2c_device);
}
-module_init(sead3_i2c_init);
-
-MODULE_AUTHOR("Chris Dearman <chris@mips.com>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("I2C probe driver for SEAD3");
+device_initcall(sead3_i2c_init);
*
* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
*/
-#include <linux/module.h>
+#include <linux/init.h>
#include <linux/leds.h>
#include <linux/platform_device.h>
return platform_device_register(&fled_device);
}
-module_init(led_init);
-
-MODULE_AUTHOR("Chris Dearman <chris@mips.com>");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("LED probe driver for SEAD-3");
+device_initcall(led_init);
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- */
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/errno.h>
-
-#define PIC32_NULL 0x00
-#define PIC32_RD 0x01
-#define PIC32_SYSRD 0x02
-#define PIC32_WR 0x10
-#define PIC32_SYSWR 0x20
-#define PIC32_IRQ_CLR 0x40
-#define PIC32_STATUS 0x80
-
-#define DELAY() udelay(100) /* FIXME: needed? */
-
-/* spinlock to ensure atomic access to PIC32 */
-static DEFINE_SPINLOCK(pic32_bus_lock);
-
-/* FIXME: io_remap these */
-static void __iomem *bus_xfer = (void __iomem *)0xbf000600;
-static void __iomem *bus_status = (void __iomem *)0xbf000060;
-
-static inline unsigned int ioready(void)
-{
- return readl(bus_status) & 1;
-}
-
-static inline void wait_ioready(void)
-{
- do { } while (!ioready());
-}
-
-static inline void wait_ioclear(void)
-{
- do { } while (ioready());
-}
-
-static inline void check_ioclear(void)
-{
- if (ioready()) {
- pr_debug("ioclear: initially busy\n");
- do {
- (void) readl(bus_xfer);
- DELAY();
- } while (ioready());
- pr_debug("ioclear: cleared busy\n");
- }
-}
-
-u32 pic32_bus_readl(u32 reg)
-{
- unsigned long flags;
- u32 status, val;
-
- spin_lock_irqsave(&pic32_bus_lock, flags);
-
- check_ioclear();
-
- writel((PIC32_RD << 24) | (reg & 0x00ffffff), bus_xfer);
- DELAY();
- wait_ioready();
- status = readl(bus_xfer);
- DELAY();
- val = readl(bus_xfer);
- wait_ioclear();
-
- pr_debug("pic32_bus_readl: *%x -> %x (status=%x)\n", reg, val, status);
-
- spin_unlock_irqrestore(&pic32_bus_lock, flags);
-
- return val;
-}
-
-void pic32_bus_writel(u32 val, u32 reg)
-{
- unsigned long flags;
- u32 status;
-
- spin_lock_irqsave(&pic32_bus_lock, flags);
-
- check_ioclear();
-
- writel((PIC32_WR << 24) | (reg & 0x00ffffff), bus_xfer);
- DELAY();
- writel(val, bus_xfer);
- DELAY();
- wait_ioready();
- status = readl(bus_xfer);
- wait_ioclear();
-
- pr_debug("pic32_bus_writel: *%x <- %x (status=%x)\n", reg, val, status);
-
- spin_unlock_irqrestore(&pic32_bus_lock, flags);
-}
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
- */
-#include <linux/delay.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/spinlock.h>
-#include <linux/platform_device.h>
-#include <linux/init.h>
-#include <linux/errno.h>
-#include <linux/i2c.h>
-#include <linux/slab.h>
-
-#define PIC32_I2CxCON 0x0000
-#define PIC32_I2CxCONCLR 0x0004
-#define PIC32_I2CxCONSET 0x0008
-#define PIC32_I2CxCONINV 0x000C
-#define I2CCON_ON (1<<15)
-#define I2CCON_FRZ (1<<14)
-#define I2CCON_SIDL (1<<13)
-#define I2CCON_SCLREL (1<<12)
-#define I2CCON_STRICT (1<<11)
-#define I2CCON_A10M (1<<10)
-#define I2CCON_DISSLW (1<<9)
-#define I2CCON_SMEN (1<<8)
-#define I2CCON_GCEN (1<<7)
-#define I2CCON_STREN (1<<6)
-#define I2CCON_ACKDT (1<<5)
-#define I2CCON_ACKEN (1<<4)
-#define I2CCON_RCEN (1<<3)
-#define I2CCON_PEN (1<<2)
-#define I2CCON_RSEN (1<<1)
-#define I2CCON_SEN (1<<0)
-
-#define PIC32_I2CxSTAT 0x0010
-#define PIC32_I2CxSTATCLR 0x0014
-#define PIC32_I2CxSTATSET 0x0018
-#define PIC32_I2CxSTATINV 0x001C
-#define I2CSTAT_ACKSTAT (1<<15)
-#define I2CSTAT_TRSTAT (1<<14)
-#define I2CSTAT_BCL (1<<10)
-#define I2CSTAT_GCSTAT (1<<9)
-#define I2CSTAT_ADD10 (1<<8)
-#define I2CSTAT_IWCOL (1<<7)
-#define I2CSTAT_I2COV (1<<6)
-#define I2CSTAT_DA (1<<5)
-#define I2CSTAT_P (1<<4)
-#define I2CSTAT_S (1<<3)
-#define I2CSTAT_RW (1<<2)
-#define I2CSTAT_RBF (1<<1)
-#define I2CSTAT_TBF (1<<0)
-
-#define PIC32_I2CxADD 0x0020
-#define PIC32_I2CxADDCLR 0x0024
-#define PIC32_I2CxADDSET 0x0028
-#define PIC32_I2CxADDINV 0x002C
-#define PIC32_I2CxMSK 0x0030
-#define PIC32_I2CxMSKCLR 0x0034
-#define PIC32_I2CxMSKSET 0x0038
-#define PIC32_I2CxMSKINV 0x003C
-#define PIC32_I2CxBRG 0x0040
-#define PIC32_I2CxBRGCLR 0x0044
-#define PIC32_I2CxBRGSET 0x0048
-#define PIC32_I2CxBRGINV 0x004C
-#define PIC32_I2CxTRN 0x0050
-#define PIC32_I2CxTRNCLR 0x0054
-#define PIC32_I2CxTRNSET 0x0058
-#define PIC32_I2CxTRNINV 0x005C
-#define PIC32_I2CxRCV 0x0060
-
-struct i2c_platform_data {
- u32 base;
- struct i2c_adapter adap;
- u32 xfer_timeout;
- u32 ack_timeout;
- u32 ctl_timeout;
-};
-
-extern u32 pic32_bus_readl(u32 reg);
-extern void pic32_bus_writel(u32 val, u32 reg);
-
-static inline void
-StartI2C(struct i2c_platform_data *adap)
-{
- pr_debug("StartI2C\n");
- pic32_bus_writel(I2CCON_SEN, adap->base + PIC32_I2CxCONSET);
-}
-
-static inline void
-StopI2C(struct i2c_platform_data *adap)
-{
- pr_debug("StopI2C\n");
- pic32_bus_writel(I2CCON_PEN, adap->base + PIC32_I2CxCONSET);
-}
-
-static inline void
-AckI2C(struct i2c_platform_data *adap)
-{
- pr_debug("AckI2C\n");
- pic32_bus_writel(I2CCON_ACKDT, adap->base + PIC32_I2CxCONCLR);
- pic32_bus_writel(I2CCON_ACKEN, adap->base + PIC32_I2CxCONSET);
-}
-
-static inline void
-NotAckI2C(struct i2c_platform_data *adap)
-{
- pr_debug("NakI2C\n");
- pic32_bus_writel(I2CCON_ACKDT, adap->base + PIC32_I2CxCONSET);
- pic32_bus_writel(I2CCON_ACKEN, adap->base + PIC32_I2CxCONSET);
-}
-
-static inline int
-IdleI2C(struct i2c_platform_data *adap)
-{
- int i;
-
- pr_debug("IdleI2C\n");
- for (i = 0; i < adap->ctl_timeout; i++) {
- if (((pic32_bus_readl(adap->base + PIC32_I2CxCON) &
- (I2CCON_ACKEN | I2CCON_RCEN | I2CCON_PEN | I2CCON_RSEN |
- I2CCON_SEN)) == 0) &&
- ((pic32_bus_readl(adap->base + PIC32_I2CxSTAT) &
- (I2CSTAT_TRSTAT)) == 0))
- return 0;
- udelay(1);
- }
- return -ETIMEDOUT;
-}
-
-static inline u32
-MasterWriteI2C(struct i2c_platform_data *adap, u32 byte)
-{
- pr_debug("MasterWriteI2C\n");
-
- pic32_bus_writel(byte, adap->base + PIC32_I2CxTRN);
-
- return pic32_bus_readl(adap->base + PIC32_I2CxSTAT) & I2CSTAT_IWCOL;
-}
-
-static inline u32
-MasterReadI2C(struct i2c_platform_data *adap)
-{
- pr_debug("MasterReadI2C\n");
-
- pic32_bus_writel(I2CCON_RCEN, adap->base + PIC32_I2CxCONSET);
-
- while (pic32_bus_readl(adap->base + PIC32_I2CxCON) & I2CCON_RCEN)
- ;
-
- pic32_bus_writel(I2CSTAT_I2COV, adap->base + PIC32_I2CxSTATCLR);
-
- return pic32_bus_readl(adap->base + PIC32_I2CxRCV);
-}
-
-static int
-do_address(struct i2c_platform_data *adap, unsigned int addr, int rd)
-{
- pr_debug("doaddress\n");
-
- IdleI2C(adap);
- StartI2C(adap);
- IdleI2C(adap);
-
- addr <<= 1;
- if (rd)
- addr |= 1;
-
- if (MasterWriteI2C(adap, addr))
- return -EIO;
- IdleI2C(adap);
- if (pic32_bus_readl(adap->base + PIC32_I2CxSTAT) & I2CSTAT_ACKSTAT)
- return -EIO;
- return 0;
-}
-
-static int
-i2c_read(struct i2c_platform_data *adap, unsigned char *buf,
- unsigned int len)
-{
- int i;
- u32 data;
-
- pr_debug("i2c_read\n");
-
- i = 0;
- while (i < len) {
- data = MasterReadI2C(adap);
- buf[i++] = data;
- if (i < len)
- AckI2C(adap);
- else
- NotAckI2C(adap);
- }
-
- StopI2C(adap);
- IdleI2C(adap);
- return 0;
-}
-
-static int
-i2c_write(struct i2c_platform_data *adap, unsigned char *buf,
- unsigned int len)
-{
- int i;
- u32 data;
-
- pr_debug("i2c_write\n");
-
- i = 0;
- while (i < len) {
- data = buf[i];
- if (MasterWriteI2C(adap, data))
- return -EIO;
- IdleI2C(adap);
- if (pic32_bus_readl(adap->base + PIC32_I2CxSTAT) &
- I2CSTAT_ACKSTAT)
- return -EIO;
- i++;
- }
-
- StopI2C(adap);
- IdleI2C(adap);
- return 0;
-}
-
-static int
-platform_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
-{
- struct i2c_platform_data *adap = i2c_adap->algo_data;
- struct i2c_msg *p;
- int i, err = 0;
-
- pr_debug("platform_xfer\n");
- for (i = 0; i < num; i++) {
-#define __BUFSIZE 80
- int ii;
- static char buf[__BUFSIZE];
- char *b = buf;
-
- p = &msgs[i];
- b += sprintf(buf, " [%d bytes]", p->len);
- if ((p->flags & I2C_M_RD) == 0) {
- for (ii = 0; ii < p->len; ii++) {
- if (b < &buf[__BUFSIZE-4]) {
- b += sprintf(b, " %02x", p->buf[ii]);
- } else {
- strcat(b, "...");
- break;
- }
- }
- }
- pr_debug("xfer%d: DevAddr: %04x Op:%s Data:%s\n", i, p->addr,
- (p->flags & I2C_M_RD) ? "Rd" : "Wr", buf);
- }
-
-
- for (i = 0; !err && i < num; i++) {
- p = &msgs[i];
- err = do_address(adap, p->addr, p->flags & I2C_M_RD);
- if (err || !p->len)
- continue;
- if (p->flags & I2C_M_RD)
- err = i2c_read(adap, p->buf, p->len);
- else
- err = i2c_write(adap, p->buf, p->len);
- }
-
- /* Return the number of messages processed, or the error code. */
- if (err == 0)
- err = num;
-
- return err;
-}
-
-static u32
-platform_func(struct i2c_adapter *adap)
-{
- pr_debug("platform_algo\n");
- return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
-}
-
-static const struct i2c_algorithm platform_algo = {
- .master_xfer = platform_xfer,
- .functionality = platform_func,
-};
-
-static void i2c_platform_setup(struct i2c_platform_data *priv)
-{
- pr_debug("i2c_platform_setup\n");
-
- pic32_bus_writel(500, priv->base + PIC32_I2CxBRG);
- pic32_bus_writel(I2CCON_ON, priv->base + PIC32_I2CxCONCLR);
- pic32_bus_writel(I2CCON_ON, priv->base + PIC32_I2CxCONSET);
- pic32_bus_writel((I2CSTAT_BCL | I2CSTAT_IWCOL),
- (priv->base + PIC32_I2CxSTATCLR));
-}
-
-static void i2c_platform_disable(struct i2c_platform_data *priv)
-{
- pr_debug("i2c_platform_disable\n");
-}
-
-static int i2c_platform_probe(struct platform_device *pdev)
-{
- struct i2c_platform_data *priv;
- struct resource *r;
- int ret;
-
- pr_debug("i2c_platform_probe\n");
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!r)
- return -ENODEV;
-
- priv = devm_kzalloc(&pdev->dev, sizeof(struct i2c_platform_data),
- GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
-
- /* FIXME: need to allocate resource in PIC32 space */
-#if 0
- priv->base = bus_request_region(r->start, resource_size(r),
- pdev->name);
-#else
- priv->base = r->start;
-#endif
- if (!priv->base)
- return -EBUSY;
-
- priv->xfer_timeout = 200;
- priv->ack_timeout = 200;
- priv->ctl_timeout = 200;
-
- priv->adap.nr = pdev->id;
- priv->adap.algo = &platform_algo;
- priv->adap.algo_data = priv;
- priv->adap.dev.parent = &pdev->dev;
- strlcpy(priv->adap.name, "PIC32 I2C", sizeof(priv->adap.name));
-
- i2c_platform_setup(priv);
-
- ret = i2c_add_numbered_adapter(&priv->adap);
- if (ret) {
- i2c_platform_disable(priv);
- return ret;
- }
-
- platform_set_drvdata(pdev, priv);
- return 0;
-}
-
-static int i2c_platform_remove(struct platform_device *pdev)
-{
- struct i2c_platform_data *priv = platform_get_drvdata(pdev);
-
- pr_debug("i2c_platform_remove\n");
- platform_set_drvdata(pdev, NULL);
- i2c_del_adapter(&priv->adap);
- i2c_platform_disable(priv);
- return 0;
-}
-
-#ifdef CONFIG_PM
-static int
-i2c_platform_suspend(struct platform_device *pdev, pm_message_t state)
-{
- struct i2c_platform_data *priv = platform_get_drvdata(pdev);
-
- dev_dbg(&pdev->dev, "i2c_platform_disable\n");
- i2c_platform_disable(priv);
-
- return 0;
-}
-
-static int
-i2c_platform_resume(struct platform_device *pdev)
-{
- struct i2c_platform_data *priv = platform_get_drvdata(pdev);
-
- dev_dbg(&pdev->dev, "i2c_platform_setup\n");
- i2c_platform_setup(priv);
-
- return 0;
-}
-#else
-#define i2c_platform_suspend NULL
-#define i2c_platform_resume NULL
-#endif
-
-static struct platform_driver i2c_platform_driver = {
- .driver = {
- .name = "i2c_pic32",
- .owner = THIS_MODULE,
- },
- .probe = i2c_platform_probe,
- .remove = i2c_platform_remove,
- .suspend = i2c_platform_suspend,
- .resume = i2c_platform_resume,
-};
-
-static int __init
-i2c_platform_init(void)
-{
- pr_debug("i2c_platform_init\n");
- return platform_driver_register(&i2c_platform_driver);
-}
-
-static void __exit
-i2c_platform_exit(void)
-{
- pr_debug("i2c_platform_exit\n");
- platform_driver_unregister(&i2c_platform_driver);
-}
-
-MODULE_AUTHOR("Chris Dearman, MIPS Technologies INC.");
-MODULE_DESCRIPTION("PIC32 I2C driver");
-MODULE_LICENSE("GPL");
-
-module_init(i2c_platform_init);
-module_exit(i2c_platform_exit);
obj-y += setup.o nlm_hal.o cop2-ex.o dt.o
obj-$(CONFIG_SMP) += wakeup.o
-obj-$(CONFIG_USB) += usb-init.o
-obj-$(CONFIG_USB) += usb-init-xlp2.o
-obj-$(CONFIG_SATA_AHCI) += ahci-init.o
-obj-$(CONFIG_SATA_AHCI) += ahci-init-xlp2.o
+ifdef CONFIG_USB
+obj-y += usb-init.o
+obj-y += usb-init-xlp2.o
+endif
+ifdef CONFIG_SATA_AHCI
+obj-y += ahci-init.o
+obj-y += ahci-init-xlp2.o
+endif
/* This marks the end of the previous function,
which means we overran. */
break;
- stack_size = (unsigned) stack_adjustment;
+ stack_size = (unsigned long) stack_adjustment;
} else if (is_ra_save_ins(&ip)) {
int ra_slot = ip.i_format.simmediate;
if (ra_slot < 0)
msg.data = 0xc00 | msixvec;
ret = irq_set_msi_desc(xirq, desc);
- if (ret < 0) {
- destroy_irq(xirq);
+ if (ret < 0)
return ret;
- }
write_msi_msg(xirq, &msg);
return 0;
pci_clear_flags(PCI_PROBE_ONLY);
- res_cfg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
res_bridge = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (!res_cfg || !res_bridge) {
- dev_err(&pdev->dev, "missing memory resources\n");
- return -EINVAL;
- }
-
ltq_pci_membase = devm_ioremap_resource(&pdev->dev, res_bridge);
if (IS_ERR(ltq_pci_membase))
return PTR_ERR(ltq_pci_membase);
+ res_cfg = platform_get_resource(pdev, IORESOURCE_MEM, 0);
ltq_pci_mapped_cfg = devm_ioremap_resource(&pdev->dev, res_cfg);
if (IS_ERR(ltq_pci_mapped_cfg))
return PTR_ERR(ltq_pci_mapped_cfg);
#include <linux/time.h>
#include <asm/irq_cpu.h>
+#include <asm/setup.h>
#include <msp_int.h>
int cpu;
unsigned long flags;
unsigned int mtflags;
- unsigned long imask = (1 << (irq - MSP_CIC_INTBASE));
+ unsigned long imask = (1 << (d->irq - MSP_CIC_INTBASE));
volatile u32 *cic_mask = (volatile u32 *)CIC_VPE0_MSK_REG;
/* timer balancing should be disabled in kernel code */
- BUG_ON(irq == MSP_INT_VPE0_TIMER || irq == MSP_INT_VPE1_TIMER);
+ BUG_ON(d->irq == MSP_INT_VPE0_TIMER || d->irq == MSP_INT_VPE1_TIMER);
LOCK_CORE(flags, mtflags);
/* enable if any of each VPE's TCs require this IRQ */
}
unsigned char __node_distances[MAX_COMPACT_NODES][MAX_COMPACT_NODES];
+EXPORT_SYMBOL(__node_distances);
static int __init compute_node_distance(nasid_t nasid_a, nasid_t nasid_b)
{
obj-$(CONFIG_SIBYTE_SENTOSA) += swarm/
obj-$(CONFIG_SIBYTE_SWARM) += swarm/
obj-$(CONFIG_SIBYTE_BIGSUR) += swarm/
+obj-$(CONFIG_SIBYTE_LITTLESUR) += swarm/
#define __raw_writew writew
#define __raw_writel writel
+#define writeb_relaxed writeb
+#define writew_relaxed writew
+#define writel_relaxed writel
+
/*****************************************************************************/
/*
* traditional input/output functions
--- /dev/null
+config NIOS2
+ def_bool y
+ select ARCH_WANT_OPTIONAL_GPIOLIB
+ select CLKSRC_OF
+ select GENERIC_ATOMIC64
+ select GENERIC_CLOCKEVENTS
+ select GENERIC_CPU_DEVICES
+ select GENERIC_IRQ_PROBE
+ select GENERIC_IRQ_SHOW
+ select HAVE_ARCH_TRACEHOOK
+ select IRQ_DOMAIN
+ select MODULES_USE_ELF_RELA
+ select OF
+ select OF_EARLY_FLATTREE
+ select SOC_BUS
+ select SPARSE_IRQ
+ select USB_ARCH_HAS_HCD if USB_SUPPORT
+
+config GENERIC_CSUM
+ def_bool y
+
+config GENERIC_HWEIGHT
+ def_bool y
+
+config GENERIC_CALIBRATE_DELAY
+ def_bool y
+
+config NO_IOPORT_MAP
+ def_bool y
+
+config HAS_DMA
+ def_bool y
+
+config FPU
+ def_bool n
+
+config SWAP
+ def_bool n
+
+config RWSEM_GENERIC_SPINLOCK
+ def_bool y
+
+config TRACE_IRQFLAGS_SUPPORT
+ def_bool n
+
+source "init/Kconfig"
+
+menu "Kernel features"
+
+source "kernel/Kconfig.preempt"
+
+source "kernel/Kconfig.freezer"
+
+source "kernel/Kconfig.hz"
+
+source "mm/Kconfig"
+
+config FORCE_MAX_ZONEORDER
+ int "Maximum zone order"
+ range 9 20
+ default "11"
+ help
+ The kernel memory allocator divides physically contiguous memory
+ blocks into "zones", where each zone is a power of two number of
+ pages. This option selects the largest power of two that the kernel
+ keeps in the memory allocator. If you need to allocate very large
+ blocks of physically contiguous memory, then you may need to
+ increase this value.
+
+ This config option is actually maximum order plus one. For example,
+ a value of 11 means that the largest free memory block is 2^10 pages.
+
+endmenu
+
+source "arch/nios2/platform/Kconfig.platform"
+
+menu "Processor type and features"
+
+config MMU
+ def_bool y
+
+config NR_CPUS
+ int
+ default "1"
+
+config NIOS2_ALIGNMENT_TRAP
+ bool "Catch alignment trap"
+ default y
+ help
+ Nios II CPUs cannot fetch/store data which is not bus aligned,
+ i.e., a 2 or 4 byte fetch must start at an address divisible by
+ 2 or 4. Any non-aligned load/store instructions will be trapped and
+ emulated in software if you say Y here, which has a performance
+ impact.
+
+comment "Boot options"
+
+config CMDLINE_BOOL
+ bool "Default bootloader kernel arguments"
+ default y
+
+config CMDLINE
+ string "Default kernel command string"
+ default ""
+ depends on CMDLINE_BOOL
+ help
+ On some platforms, there is currently no way for the boot loader to
+ pass arguments to the kernel. For these platforms, you can supply
+ some command-line options at build time by entering them here. In
+ other cases you can specify kernel args so that you don't have
+ to set them up in board prom initialization routines.
+
+config CMDLINE_FORCE
+ bool "Force default kernel command string"
+ depends on CMDLINE_BOOL
+ help
+ Set this to have arguments from the default kernel command string
+ override those passed by the boot loader.
+
+config NIOS2_CMDLINE_IGNORE_DTB
+ bool "Ignore kernel command string from DTB"
+ depends on CMDLINE_BOOL
+ depends on !CMDLINE_FORCE
+ default y
+ help
+ Set this to ignore the bootargs property from the devicetree's
+ chosen node and fall back to CMDLINE if nothing is passed.
+
+config NIOS2_PASS_CMDLINE
+ bool "Passed kernel command line from u-boot"
+ default n
+ help
+ Use bootargs env variable from u-boot for kernel command line.
+ will override "Default kernel command string".
+ Say N if you are unsure.
+
+endmenu
+
+menu "Advanced setup"
+
+config ADVANCED_OPTIONS
+ bool "Prompt for advanced kernel configuration options"
+ help
+
+comment "Default settings for advanced configuration options are used"
+ depends on !ADVANCED_OPTIONS
+
+config NIOS2_KERNEL_MMU_REGION_BASE_BOOL
+ bool "Set custom kernel MMU region base address"
+ depends on ADVANCED_OPTIONS
+ help
+ This option allows you to set the virtual address of the kernel MMU region.
+
+ Say N here unless you know what you are doing.
+
+config NIOS2_KERNEL_MMU_REGION_BASE
+ hex "Virtual base address of the kernel MMU region " if NIOS2_KERNEL_MMU_REGION_BASE_BOOL
+ default "0x80000000"
+ help
+ This option allows you to set the virtual base address of the kernel MMU region.
+
+config NIOS2_KERNEL_REGION_BASE_BOOL
+ bool "Set custom kernel region base address"
+ depends on ADVANCED_OPTIONS
+ help
+ This option allows you to set the virtual address of the kernel region.
+
+ Say N here unless you know what you are doing.
+
+config NIOS2_KERNEL_REGION_BASE
+ hex "Virtual base address of the kernel region " if NIOS2_KERNEL_REGION_BASE_BOOL
+ default "0xc0000000"
+
+config NIOS2_IO_REGION_BASE_BOOL
+ bool "Set custom I/O region base address"
+ depends on ADVANCED_OPTIONS
+ help
+ This option allows you to set the virtual address of the I/O region.
+
+ Say N here unless you know what you are doing.
+
+config NIOS2_IO_REGION_BASE
+ hex "Virtual base address of the I/O region" if NIOS2_IO_REGION_BASE_BOOL
+ default "0xe0000000"
+
+endmenu
+
+menu "Executable file formats"
+
+source "fs/Kconfig.binfmt"
+
+endmenu
+
+source "net/Kconfig"
+
+source "drivers/Kconfig"
+
+source "fs/Kconfig"
+
+source "arch/nios2/Kconfig.debug"
+
+source "security/Kconfig"
+
+source "crypto/Kconfig"
+
+source "lib/Kconfig"
--- /dev/null
+menu "Kernel hacking"
+
+config TRACE_IRQFLAGS_SUPPORT
+ def_bool y
+
+source "lib/Kconfig.debug"
+
+config DEBUG_STACK_USAGE
+ bool "Enable stack utilization instrumentation"
+ depends on DEBUG_KERNEL
+ help
+ Enables the display of the minimum amount of free stack which each
+ task has ever had available in the sysrq-T and sysrq-P debug output.
+
+ This option will slow down process creation somewhat.
+
+endmenu
--- /dev/null
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 2013 Altera Corporation
+# Copyright (C) 1994, 95, 96, 2003 by Wind River Systems
+# Written by Fredrik Markstrom
+#
+# This file is included by the global makefile so that you can add your own
+# architecture-specific flags and dependencies. Remember to do have actions
+# for "archclean" cleaning up for this architecture.
+#
+# Nios2 port by Wind River Systems Inc trough:
+# fredrik.markstrom@gmail.com and ivarholmqvist@gmail.com
+
+UTS_SYSNAME = Linux
+
+export MMU
+
+LIBGCC := $(shell $(CC) $(KBUILD_CFLAGS) -print-libgcc-file-name)
+
+KBUILD_CFLAGS += -pipe -D__linux__ -D__ELF__
+KBUILD_CFLAGS += $(if $(CONFIG_NIOS2_HW_MUL_SUPPORT),-mhw-mul,-mno-hw-mul)
+KBUILD_CFLAGS += $(if $(CONFIG_NIOS2_HW_MULX_SUPPORT),-mhw-mulx,-mno-hw-mulx)
+KBUILD_CFLAGS += $(if $(CONFIG_NIOS2_HW_DIV_SUPPORT),-mhw-div,-mno-hw-div)
+KBUILD_CFLAGS += $(if $(CONFIG_NIOS2_FPU_SUPPORT),-mcustom-fpu-cfg=60-1,)
+
+KBUILD_CFLAGS += -fno-optimize-sibling-calls
+KBUILD_CFLAGS += -DUTS_SYSNAME=\"$(UTS_SYSNAME)\"
+KBUILD_CFLAGS += -fno-builtin
+KBUILD_CFLAGS += -G 0
+
+head-y := arch/nios2/kernel/head.o
+libs-y += arch/nios2/lib/ $(LIBGCC)
+core-y += arch/nios2/kernel/ arch/nios2/mm/
+core-y += arch/nios2/platform/
+
+INSTALL_PATH ?= /tftpboot
+nios2-boot := arch/$(ARCH)/boot
+BOOT_TARGETS = vmImage zImage
+PHONY += $(BOOT_TARGETS) install
+KBUILD_IMAGE := $(nios2-boot)/vmImage
+
+ifneq ($(CONFIG_NIOS2_DTB_SOURCE),"")
+ core-y += $(nios2-boot)/
+endif
+
+all: vmImage
+
+archclean:
+ $(Q)$(MAKE) $(clean)=$(nios2-boot)
+
+%.dtb:
+ $(Q)$(MAKE) $(build)=$(nios2-boot) $(nios2-boot)/$@
+
+dtbs:
+ $(Q)$(MAKE) $(build)=$(nios2-boot) $(nios2-boot)/$@
+
+$(BOOT_TARGETS): vmlinux
+ $(Q)$(MAKE) $(build)=$(nios2-boot) $(nios2-boot)/$@
+
+install:
+ $(Q)$(MAKE) $(build)=$(nios2-boot) BOOTIMAGE=$(KBUILD_IMAGE) install
+
+define archhelp
+ echo '* vmImage - Kernel-only image for U-Boot ($(KBUILD_IMAGE))'
+ echo ' install - Install kernel using'
+ echo ' (your) ~/bin/$(INSTALLKERNEL) or'
+ echo ' (distribution) /sbin/$(INSTALLKERNEL) or'
+ echo ' install to $$(INSTALL_PATH)'
+ echo ' dtbs - Build device tree blobs for enabled boards'
+endef
--- /dev/null
+#
+# arch/nios2/boot/Makefile
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+
+UIMAGE_LOADADDR = $(shell $(NM) vmlinux | awk '$$NF == "_stext" {print $$1}')
+UIMAGE_ENTRYADDR = $(shell $(NM) vmlinux | awk '$$NF == "_start" {print $$1}')
+UIMAGE_COMPRESSION = gzip
+
+OBJCOPYFLAGS_vmlinux.bin := -O binary
+
+targets += vmlinux.bin vmlinux.gz vmImage
+
+$(obj)/vmlinux.bin: vmlinux FORCE
+ $(call if_changed,objcopy)
+
+$(obj)/vmlinux.gz: $(obj)/vmlinux.bin FORCE
+ $(call if_changed,gzip)
+
+$(obj)/vmImage: $(obj)/vmlinux.gz
+ $(call if_changed,uimage)
+ @$(kecho) 'Kernel: $@ is ready'
+
+# Rule to build device tree blobs
+DTB_SRC := $(patsubst "%",%,$(CONFIG_NIOS2_DTB_SOURCE))
+
+# Make sure the generated dtb gets removed during clean
+extra-$(CONFIG_NIOS2_DTB_SOURCE_BOOL) += system.dtb
+
+$(obj)/system.dtb: $(DTB_SRC) FORCE
+ $(call cmd,dtc)
+
+# Ensure system.dtb exists
+$(obj)/linked_dtb.o: $(obj)/system.dtb
+
+obj-$(CONFIG_NIOS2_DTB_SOURCE_BOOL) += linked_dtb.o
+
+targets += $(dtb-y)
+
+# Rule to build device tree blobs with make command
+$(obj)/%.dtb: $(src)/dts/%.dts FORCE
+ $(call if_changed_dep,dtc)
+
+$(obj)/dtbs: $(addprefix $(obj)/, $(dtb-y))
+
+clean-files := *.dtb
+
+install:
+ sh $(srctree)/$(src)/install.sh $(KERNELRELEASE) $(BOOTIMAGE) System.map "$(INSTALL_PATH)"
--- /dev/null
+/*
+ * Copyright (C) 2013 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ * This file is generated by sopc2dts.
+ */
+
+/dts-v1/;
+
+/ {
+ model = "altr,qsys_ghrd_3c120";
+ compatible = "altr,qsys_ghrd_3c120";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu: cpu@0x0 {
+ device_type = "cpu";
+ compatible = "altr,nios2-1.0";
+ reg = <0x00000000>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ clock-frequency = <125000000>;
+ dcache-line-size = <32>;
+ icache-line-size = <32>;
+ dcache-size = <32768>;
+ icache-size = <32768>;
+ altr,implementation = "fast";
+ altr,pid-num-bits = <8>;
+ altr,tlb-num-ways = <16>;
+ altr,tlb-num-entries = <128>;
+ altr,tlb-ptr-sz = <7>;
+ altr,has-div = <1>;
+ altr,has-mul = <1>;
+ altr,reset-addr = <0xc2800000>;
+ altr,fast-tlb-miss-addr = <0xc7fff400>;
+ altr,exception-addr = <0xd0000020>;
+ altr,has-initda = <1>;
+ altr,has-mmu = <1>;
+ };
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x10000000 0x08000000>,
+ <0x07fff400 0x00000400>;
+ };
+
+ sopc@0 {
+ device_type = "soc";
+ ranges;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "altr,avalon", "simple-bus";
+ bus-frequency = <125000000>;
+
+ pb_cpu_to_io: bridge@0x8000000 {
+ compatible = "simple-bus";
+ reg = <0x08000000 0x00800000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x00002000 0x08002000 0x00002000>,
+ <0x00004000 0x08004000 0x00000400>,
+ <0x00004400 0x08004400 0x00000040>,
+ <0x00004800 0x08004800 0x00000040>,
+ <0x00004c80 0x08004c80 0x00000020>,
+ <0x00004d50 0x08004d50 0x00000008>,
+ <0x00008000 0x08008000 0x00000020>,
+ <0x00400000 0x08400000 0x00000020>;
+
+ timer_1ms: timer@0x400000 {
+ compatible = "altr,timer-1.0";
+ reg = <0x00400000 0x00000020>;
+ interrupt-parent = <&cpu>;
+ interrupts = <11>;
+ clock-frequency = <125000000>;
+ };
+
+ timer_0: timer@0x8000 {
+ compatible = "altr,timer-1.0";
+ reg = < 0x00008000 0x00000020 >;
+ interrupt-parent = < &cpu >;
+ interrupts = < 5 >;
+ clock-frequency = < 125000000 >;
+ };
+
+ jtag_uart: serial@0x4d50 {
+ compatible = "altr,juart-1.0";
+ reg = <0x00004d50 0x00000008>;
+ interrupt-parent = <&cpu>;
+ interrupts = <1>;
+ };
+
+ tse_mac: ethernet@0x4000 {
+ compatible = "altr,tse-1.0";
+ reg = <0x00004000 0x00000400>,
+ <0x00004400 0x00000040>,
+ <0x00004800 0x00000040>,
+ <0x00002000 0x00002000>;
+ reg-names = "control_port", "rx_csr", "tx_csr", "s1";
+ interrupt-parent = <&cpu>;
+ interrupts = <2 3>;
+ interrupt-names = "rx_irq", "tx_irq";
+ rx-fifo-depth = <8192>;
+ tx-fifo-depth = <8192>;
+ max-frame-size = <1518>;
+ local-mac-address = [ 00 00 00 00 00 00 ];
+ phy-mode = "rgmii-id";
+ phy-handle = <&phy0>;
+ tse_mac_mdio: mdio {
+ compatible = "altr,tse-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ phy0: ethernet-phy@18 {
+ reg = <18>;
+ device_type = "ethernet-phy";
+ };
+ };
+ };
+
+ uart: serial@0x4c80 {
+ compatible = "altr,uart-1.0";
+ reg = <0x00004c80 0x00000020>;
+ interrupt-parent = <&cpu>;
+ interrupts = <10>;
+ current-speed = <115200>;
+ clock-frequency = <62500000>;
+ };
+ };
+
+ cfi_flash_64m: flash@0x0 {
+ compatible = "cfi-flash";
+ reg = <0x00000000 0x04000000>;
+ bank-width = <2>;
+ device-width = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@800000 {
+ reg = <0x00800000 0x01e00000>;
+ label = "JFFS2 Filesystem";
+ };
+ };
+ };
+
+ chosen {
+ bootargs = "debug console=ttyJ0,115200";
+ };
+};
--- /dev/null
+#!/bin/sh
+#
+# This file is subject to the terms and conditions of the GNU General Public
+# License. See the file "COPYING" in the main directory of this archive
+# for more details.
+#
+# Copyright (C) 1995 by Linus Torvalds
+#
+# Adapted from code in arch/i386/boot/Makefile by H. Peter Anvin
+#
+# "make install" script for nios2 architecture
+#
+# Arguments:
+# $1 - kernel version
+# $2 - kernel image file
+# $3 - kernel map file
+# $4 - default install path (blank if root directory)
+#
+
+verify () {
+ if [ ! -f "$1" ]; then
+ echo "" 1>&2
+ echo " *** Missing file: $1" 1>&2
+ echo ' *** You need to run "make" before "make install".' 1>&2
+ echo "" 1>&2
+ exit 1
+ fi
+}
+
+# Make sure the files actually exist
+verify "$2"
+verify "$3"
+
+# User may have a custom install script
+
+if [ -x ~/bin/${INSTALLKERNEL} ]; then exec ~/bin/${INSTALLKERNEL} "$@"; fi
+if [ -x /sbin/${INSTALLKERNEL} ]; then exec /sbin/${INSTALLKERNEL} "$@"; fi
+
+# Default install - same as make zlilo
+
+if [ -f $4/vmlinuz ]; then
+ mv $4/vmlinuz $4/vmlinuz.old
+fi
+
+if [ -f $4/System.map ]; then
+ mv $4/System.map $4/System.old
+fi
+
+cat $2 > $4/vmlinuz
+cp $3 $4/System.map
+
+sync
--- /dev/null
+/*
+ * Copyright (C) 2011 Thomas Chou <thomas@wytron.com.tw>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+.section .dtb.init.rodata,"a"
+.incbin "arch/nios2/boot/system.dtb"
--- /dev/null
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSCTL_SYSCALL=y
+# CONFIG_ELF_CORE is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_TIMERFD is not set
+# CONFIG_EVENTFD is not set
+# CONFIG_SHMEM is not set
+# CONFIG_AIO is not set
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_NIOS2_MEM_BASE=0x10000000
+CONFIG_NIOS2_HW_MUL_SUPPORT=y
+CONFIG_NIOS2_HW_DIV_SUPPORT=y
+CONFIG_CUSTOM_CACHE_SETTINGS=y
+CONFIG_NIOS2_DCACHE_SIZE=0x8000
+CONFIG_NIOS2_ICACHE_SIZE=0x8000
+# CONFIG_NIOS2_CMDLINE_IGNORE_DTB is not set
+CONFIG_NIOS2_PASS_CMDLINE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FW_LOADER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_NETDEVICES=y
+CONFIG_ALTERA_TSE=y
+CONFIG_MARVELL_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_ALTERA_JTAGUART=y
+CONFIG_SERIAL_ALTERA_JTAGUART_CONSOLE=y
+CONFIG_SERIAL_ALTERA_UART=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+CONFIG_JFFS2_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_ROOT_NFS=y
+CONFIG_SUNRPC_DEBUG=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
--- /dev/null
+generic-y += atomic.h
+generic-y += auxvec.h
+generic-y += barrier.h
+generic-y += bitops.h
+generic-y += bitsperlong.h
+generic-y += bug.h
+generic-y += bugs.h
+generic-y += clkdev.h
+generic-y += cputime.h
+generic-y += current.h
+generic-y += device.h
+generic-y += div64.h
+generic-y += dma.h
+generic-y += emergency-restart.h
+generic-y += errno.h
+generic-y += exec.h
+generic-y += fb.h
+generic-y += fcntl.h
+generic-y += ftrace.h
+generic-y += futex.h
+generic-y += hardirq.h
+generic-y += hash.h
+generic-y += hw_irq.h
+generic-y += ioctl.h
+generic-y += ioctls.h
+generic-y += ipcbuf.h
+generic-y += irq_regs.h
+generic-y += irq_work.h
+generic-y += kdebug.h
+generic-y += kmap_types.h
+generic-y += kvm_para.h
+generic-y += local.h
+generic-y += mcs_spinlock.h
+generic-y += mman.h
+generic-y += module.h
+generic-y += msgbuf.h
+generic-y += param.h
+generic-y += pci.h
+generic-y += percpu.h
+generic-y += poll.h
+generic-y += posix_types.h
+generic-y += preempt.h
+generic-y += resource.h
+generic-y += scatterlist.h
+generic-y += sections.h
+generic-y += segment.h
+generic-y += sembuf.h
+generic-y += serial.h
+generic-y += shmbuf.h
+generic-y += shmparam.h
+generic-y += siginfo.h
+generic-y += signal.h
+generic-y += socket.h
+generic-y += sockios.h
+generic-y += spinlock.h
+generic-y += stat.h
+generic-y += statfs.h
+generic-y += termbits.h
+generic-y += termios.h
+generic-y += topology.h
+generic-y += trace_clock.h
+generic-y += types.h
+generic-y += unaligned.h
+generic-y += user.h
+generic-y += vga.h
+generic-y += xor.h
--- /dev/null
+/*
+ * Macro used to simplify coding multi-line assembler.
+ * Some of the bit test macro can simplify down to one line
+ * depending on the mask value.
+ *
+ * Copyright (C) 2004 Microtronix Datacom Ltd.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ *
+ */
+#ifndef _ASM_NIOS2_ASMMACROS_H
+#define _ASM_NIOS2_ASMMACROS_H
+/*
+ * ANDs reg2 with mask and places the result in reg1.
+ *
+ * You cannnot use the same register for reg1 & reg2.
+ */
+
+.macro ANDI32 reg1, reg2, mask
+.if \mask & 0xffff
+ .if \mask & 0xffff0000
+ movhi \reg1, %hi(\mask)
+ movui \reg1, %lo(\mask)
+ and \reg1, \reg1, \reg2
+ .else
+ andi \reg1, \reg2, %lo(\mask)
+ .endif
+.else
+ andhi \reg1, \reg2, %hi(\mask)
+.endif
+.endm
+
+/*
+ * ORs reg2 with mask and places the result in reg1.
+ *
+ * It is safe to use the same register for reg1 & reg2.
+ */
+
+.macro ORI32 reg1, reg2, mask
+.if \mask & 0xffff
+ .if \mask & 0xffff0000
+ orhi \reg1, \reg2, %hi(\mask)
+ ori \reg1, \reg2, %lo(\mask)
+ .else
+ ori \reg1, \reg2, %lo(\mask)
+ .endif
+.else
+ orhi \reg1, \reg2, %hi(\mask)
+.endif
+.endm
+
+/*
+ * XORs reg2 with mask and places the result in reg1.
+ *
+ * It is safe to use the same register for reg1 & reg2.
+ */
+
+.macro XORI32 reg1, reg2, mask
+.if \mask & 0xffff
+ .if \mask & 0xffff0000
+ xorhi \reg1, \reg2, %hi(\mask)
+ xori \reg1, \reg1, %lo(\mask)
+ .else
+ xori \reg1, \reg2, %lo(\mask)
+ .endif
+.else
+ xorhi \reg1, \reg2, %hi(\mask)
+.endif
+.endm
+
+/*
+ * This is a support macro for BTBZ & BTBNZ. It checks
+ * the bit to make sure it is valid 32 value.
+ *
+ * It is safe to use the same register for reg1 & reg2.
+ */
+
+.macro BT reg1, reg2, bit
+.if \bit > 31
+ .err
+.else
+ .if \bit < 16
+ andi \reg1, \reg2, (1 << \bit)
+ .else
+ andhi \reg1, \reg2, (1 << (\bit - 16))
+ .endif
+.endif
+.endm
+
+/*
+ * Tests the bit in reg2 and branches to label if the
+ * bit is zero. The result of the bit test is stored in reg1.
+ *
+ * It is safe to use the same register for reg1 & reg2.
+ */
+
+.macro BTBZ reg1, reg2, bit, label
+ BT \reg1, \reg2, \bit
+ beq \reg1, r0, \label
+.endm
+
+/*
+ * Tests the bit in reg2 and branches to label if the
+ * bit is non-zero. The result of the bit test is stored in reg1.
+ *
+ * It is safe to use the same register for reg1 & reg2.
+ */
+
+.macro BTBNZ reg1, reg2, bit, label
+ BT \reg1, \reg2, \bit
+ bne \reg1, r0, \label
+.endm
+
+/*
+ * Tests the bit in reg2 and then compliments the bit in reg2.
+ * The result of the bit test is stored in reg1.
+ *
+ * It is NOT safe to use the same register for reg1 & reg2.
+ */
+
+.macro BTC reg1, reg2, bit
+.if \bit > 31
+ .err
+.else
+ .if \bit < 16
+ andi \reg1, \reg2, (1 << \bit)
+ xori \reg2, \reg2, (1 << \bit)
+ .else
+ andhi \reg1, \reg2, (1 << (\bit - 16))
+ xorhi \reg2, \reg2, (1 << (\bit - 16))
+ .endif
+.endif
+.endm
+
+/*
+ * Tests the bit in reg2 and then sets the bit in reg2.
+ * The result of the bit test is stored in reg1.
+ *
+ * It is NOT safe to use the same register for reg1 & reg2.
+ */
+
+.macro BTS reg1, reg2, bit
+.if \bit > 31
+ .err
+.else
+ .if \bit < 16
+ andi \reg1, \reg2, (1 << \bit)
+ ori \reg2, \reg2, (1 << \bit)
+ .else
+ andhi \reg1, \reg2, (1 << (\bit - 16))
+ orhi \reg2, \reg2, (1 << (\bit - 16))
+ .endif
+.endif
+.endm
+
+/*
+ * Tests the bit in reg2 and then resets the bit in reg2.
+ * The result of the bit test is stored in reg1.
+ *
+ * It is NOT safe to use the same register for reg1 & reg2.
+ */
+
+.macro BTR reg1, reg2, bit
+.if \bit > 31
+ .err
+.else
+ .if \bit < 16
+ andi \reg1, \reg2, (1 << \bit)
+ andi \reg2, \reg2, %lo(~(1 << \bit))
+ .else
+ andhi \reg1, \reg2, (1 << (\bit - 16))
+ andhi \reg2, \reg2, %lo(~(1 << (\bit - 16)))
+ .endif
+.endif
+.endm
+
+/*
+ * Tests the bit in reg2 and then compliments the bit in reg2.
+ * The result of the bit test is stored in reg1. If the
+ * original bit was zero it branches to label.
+ *
+ * It is NOT safe to use the same register for reg1 & reg2.
+ */
+
+.macro BTCBZ reg1, reg2, bit, label
+ BTC \reg1, \reg2, \bit
+ beq \reg1, r0, \label
+.endm
+
+/*
+ * Tests the bit in reg2 and then compliments the bit in reg2.
+ * The result of the bit test is stored in reg1. If the
+ * original bit was non-zero it branches to label.
+ *
+ * It is NOT safe to use the same register for reg1 & reg2.
+ */
+
+.macro BTCBNZ reg1, reg2, bit, label
+ BTC \reg1, \reg2, \bit
+ bne \reg1, r0, \label
+.endm
+
+/*
+ * Tests the bit in reg2 and then sets the bit in reg2.
+ * The result of the bit test is stored in reg1. If the
+ * original bit was zero it branches to label.
+ *
+ * It is NOT safe to use the same register for reg1 & reg2.
+ */
+
+.macro BTSBZ reg1, reg2, bit, label
+ BTS \reg1, \reg2, \bit
+ beq \reg1, r0, \label
+.endm
+
+/*
+ * Tests the bit in reg2 and then sets the bit in reg2.
+ * The result of the bit test is stored in reg1. If the
+ * original bit was non-zero it branches to label.
+ *
+ * It is NOT safe to use the same register for reg1 & reg2.
+ */
+
+.macro BTSBNZ reg1, reg2, bit, label
+ BTS \reg1, \reg2, \bit
+ bne \reg1, r0, \label
+.endm
+
+/*
+ * Tests the bit in reg2 and then resets the bit in reg2.
+ * The result of the bit test is stored in reg1. If the
+ * original bit was zero it branches to label.
+ *
+ * It is NOT safe to use the same register for reg1 & reg2.
+ */
+
+.macro BTRBZ reg1, reg2, bit, label
+ BTR \reg1, \reg2, \bit
+ bne \reg1, r0, \label
+.endm
+
+/*
+ * Tests the bit in reg2 and then resets the bit in reg2.
+ * The result of the bit test is stored in reg1. If the
+ * original bit was non-zero it branches to label.
+ *
+ * It is NOT safe to use the same register for reg1 & reg2.
+ */
+
+.macro BTRBNZ reg1, reg2, bit, label
+ BTR \reg1, \reg2, \bit
+ bne \reg1, r0, \label
+.endm
+
+/*
+ * Tests the bits in mask against reg2 stores the result in reg1.
+ * If the all the bits in the mask are zero it branches to label.
+ *
+ * It is safe to use the same register for reg1 & reg2.
+ */
+
+.macro TSTBZ reg1, reg2, mask, label
+ ANDI32 \reg1, \reg2, \mask
+ beq \reg1, r0, \label
+.endm
+
+/*
+ * Tests the bits in mask against reg2 stores the result in reg1.
+ * If the any of the bits in the mask are 1 it branches to label.
+ *
+ * It is safe to use the same register for reg1 & reg2.
+ */
+
+.macro TSTBNZ reg1, reg2, mask, label
+ ANDI32 \reg1, \reg2, \mask
+ bne \reg1, r0, \label
+.endm
+
+/*
+ * Pushes reg onto the stack.
+ */
+
+.macro PUSH reg
+ addi sp, sp, -4
+ stw \reg, 0(sp)
+.endm
+
+/*
+ * Pops the top of the stack into reg.
+ */
+
+.macro POP reg
+ ldw \reg, 0(sp)
+ addi sp, sp, 4
+.endm
+
+
+#endif /* _ASM_NIOS2_ASMMACROS_H */
--- /dev/null
+/*
+ * Copyright (C) 2010 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2009 Thomas Chou <thomas@wytron.com.tw>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <generated/asm-offsets.h>
--- /dev/null
+/*
+ * Copyright (C) 2004 Microtronix Datacom Ltd.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ */
+
+#ifndef _ASM_NIOS2_CACHE_H
+#define _ASM_NIOS2_CACHE_H
+
+#define NIOS2_DCACHE_SIZE CONFIG_NIOS2_DCACHE_SIZE
+#define NIOS2_ICACHE_SIZE CONFIG_NIOS2_ICACHE_SIZE
+#define NIOS2_DCACHE_LINE_SIZE CONFIG_NIOS2_DCACHE_LINE_SIZE
+#define NIOS2_ICACHE_LINE_SHIFT 5
+#define NIOS2_ICACHE_LINE_SIZE (1 << NIOS2_ICACHE_LINE_SHIFT)
+
+/* bytes per L1 cache line */
+#define L1_CACHE_SHIFT NIOS2_ICACHE_LINE_SHIFT
+#define L1_CACHE_BYTES NIOS2_ICACHE_LINE_SIZE
+
+#define ARCH_DMA_MINALIGN L1_CACHE_BYTES
+
+#define __cacheline_aligned
+#define ____cacheline_aligned
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2003 Microtronix Datacom Ltd.
+ * Copyright (C) 2000-2002 Greg Ungerer <gerg@snapgear.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_NIOS2_CACHEFLUSH_H
+#define _ASM_NIOS2_CACHEFLUSH_H
+
+#include <linux/mm_types.h>
+
+/*
+ * This flag is used to indicate that the page pointed to by a pte is clean
+ * and does not require cleaning before returning it to the user.
+ */
+#define PG_dcache_clean PG_arch_1
+
+struct mm_struct;
+
+extern void flush_cache_all(void);
+extern void flush_cache_mm(struct mm_struct *mm);
+extern void flush_cache_dup_mm(struct mm_struct *mm);
+extern void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+ unsigned long end);
+extern void flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr,
+ unsigned long pfn);
+#define ARCH_IMPLEMENTS_FLUSH_DCACHE_PAGE 1
+extern void flush_dcache_page(struct page *page);
+
+extern void flush_icache_range(unsigned long start, unsigned long end);
+extern void flush_icache_page(struct vm_area_struct *vma, struct page *page);
+
+#define flush_cache_vmap(start, end) flush_dcache_range(start, end)
+#define flush_cache_vunmap(start, end) flush_dcache_range(start, end)
+
+extern void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+ unsigned long user_vaddr,
+ void *dst, void *src, int len);
+extern void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
+ unsigned long user_vaddr,
+ void *dst, void *src, int len);
+
+extern void flush_dcache_range(unsigned long start, unsigned long end);
+extern void invalidate_dcache_range(unsigned long start, unsigned long end);
+
+#define flush_dcache_mmap_lock(mapping) do { } while (0)
+#define flush_dcache_mmap_unlock(mapping) do { } while (0)
+
+#endif /* _ASM_NIOS2_CACHEFLUSH_H */
--- /dev/null
+/*
+ * Copyright (C) 2010 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2004 Microtronix Datacom Ltd.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_NIOS_CHECKSUM_H
+#define _ASM_NIOS_CHECKSUM_H
+
+/* Take these from lib/checksum.c */
+extern __wsum csum_partial(const void *buff, int len, __wsum sum);
+extern __wsum csum_partial_copy(const void *src, void *dst, int len,
+ __wsum sum);
+extern __wsum csum_partial_copy_from_user(const void __user *src, void *dst,
+ int len, __wsum sum, int *csum_err);
+#define csum_partial_copy_nocheck(src, dst, len, sum) \
+ csum_partial_copy((src), (dst), (len), (sum))
+
+extern __sum16 ip_fast_csum(const void *iph, unsigned int ihl);
+extern __sum16 ip_compute_csum(const void *buff, int len);
+
+/*
+ * Fold a partial checksum
+ */
+static inline __sum16 csum_fold(__wsum sum)
+{
+ __asm__ __volatile__(
+ "add %0, %1, %0\n"
+ "cmpltu r8, %0, %1\n"
+ "srli %0, %0, 16\n"
+ "add %0, %0, r8\n"
+ "nor %0, %0, %0\n"
+ : "=r" (sum)
+ : "r" (sum << 16), "0" (sum)
+ : "r8");
+ return (__force __sum16) sum;
+}
+
+/*
+ * computes the checksum of the TCP/UDP pseudo-header
+ * returns a 16-bit checksum, already complemented
+ */
+#define csum_tcpudp_nofold csum_tcpudp_nofold
+static inline __wsum csum_tcpudp_nofold(__be32 saddr, __be32 daddr,
+ unsigned short len,
+ unsigned short proto,
+ __wsum sum)
+{
+ __asm__ __volatile__(
+ "add %0, %1, %0\n"
+ "cmpltu r8, %0, %1\n"
+ "add %0, %0, r8\n" /* add carry */
+ "add %0, %2, %0\n"
+ "cmpltu r8, %0, %2\n"
+ "add %0, %0, r8\n" /* add carry */
+ "add %0, %3, %0\n"
+ "cmpltu r8, %0, %3\n"
+ "add %0, %0, r8\n" /* add carry */
+ : "=r" (sum), "=r" (saddr)
+ : "r" (daddr), "r" ((ntohs(len) << 16) + (proto * 256)),
+ "0" (sum),
+ "1" (saddr)
+ : "r8");
+
+ return sum;
+}
+
+static inline __sum16 csum_tcpudp_magic(__be32 saddr, __be32 daddr,
+ unsigned short len,
+ unsigned short proto, __wsum sum)
+{
+ return csum_fold(csum_tcpudp_nofold(saddr, daddr, len, proto, sum));
+}
+
+#endif /* _ASM_NIOS_CHECKSUM_H */
--- /dev/null
+/*
+ * Copyright (C) 2004 Microtronix Datacom Ltd.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_NIOS2_CMPXCHG_H
+#define _ASM_NIOS2_CMPXCHG_H
+
+#include <linux/irqflags.h>
+
+#define xchg(ptr, x) \
+ ((__typeof__(*(ptr)))__xchg((unsigned long)(x), (ptr), sizeof(*(ptr))))
+
+struct __xchg_dummy { unsigned long a[100]; };
+#define __xg(x) ((volatile struct __xchg_dummy *)(x))
+
+static inline unsigned long __xchg(unsigned long x, volatile void *ptr,
+ int size)
+{
+ unsigned long tmp, flags;
+
+ local_irq_save(flags);
+
+ switch (size) {
+ case 1:
+ __asm__ __volatile__(
+ "ldb %0, %2\n"
+ "stb %1, %2\n"
+ : "=&r" (tmp)
+ : "r" (x), "m" (*__xg(ptr))
+ : "memory");
+ break;
+ case 2:
+ __asm__ __volatile__(
+ "ldh %0, %2\n"
+ "sth %1, %2\n"
+ : "=&r" (tmp)
+ : "r" (x), "m" (*__xg(ptr))
+ : "memory");
+ break;
+ case 4:
+ __asm__ __volatile__(
+ "ldw %0, %2\n"
+ "stw %1, %2\n"
+ : "=&r" (tmp)
+ : "r" (x), "m" (*__xg(ptr))
+ : "memory");
+ break;
+ }
+
+ local_irq_restore(flags);
+ return tmp;
+}
+
+#include <asm-generic/cmpxchg.h>
+#include <asm-generic/cmpxchg-local.h>
+
+#endif /* _ASM_NIOS2_CMPXCHG_H */
--- /dev/null
+/*
+ * Copyright (C) 2011 Tobias Klauser <tklauser@distanz.ch>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef _ASM_NIOS2_CPUINFO_H
+#define _ASM_NIOS2_CPUINFO_H
+
+#include <linux/types.h>
+
+struct cpuinfo {
+ /* Core CPU configuration */
+ char cpu_impl[12];
+ u32 cpu_clock_freq;
+ u32 mmu;
+ u32 has_div;
+ u32 has_mul;
+ u32 has_mulx;
+
+ /* CPU caches */
+ u32 icache_line_size;
+ u32 icache_size;
+ u32 dcache_line_size;
+ u32 dcache_size;
+
+ /* TLB */
+ u32 tlb_pid_num_bits; /* number of bits used for the PID in TLBMISC */
+ u32 tlb_num_ways;
+ u32 tlb_num_ways_log2;
+ u32 tlb_num_entries;
+ u32 tlb_num_lines;
+ u32 tlb_ptr_sz;
+
+ /* Addresses */
+ u32 reset_addr;
+ u32 exception_addr;
+ u32 fast_tlb_miss_exc_addr;
+};
+
+extern struct cpuinfo cpuinfo;
+
+extern void setup_cpuinfo(void);
+
+#endif /* _ASM_NIOS2_CPUINFO_H */
--- /dev/null
+/*
+ * Copyright (C) 2014 Altera Corporation
+ * Copyright (C) 2004 Microtronix Datacom Ltd
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_NIOS2_DELAY_H
+#define _ASM_NIOS2_DELAY_H
+
+#include <asm-generic/delay.h>
+
+/* Undefined functions to get compile-time errors */
+extern void __bad_udelay(void);
+extern void __bad_ndelay(void);
+
+extern unsigned long loops_per_jiffy;
+
+#endif /* _ASM_NIOS2_DELAY_H */
--- /dev/null
+/*
+ * Copyright (C) 2011 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2009 Wind River Systems Inc
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#ifndef _ASM_NIOS2_DMA_MAPPING_H
+#define _ASM_NIOS2_DMA_MAPPING_H
+
+#include <linux/scatterlist.h>
+#include <linux/cache.h>
+#include <asm/cacheflush.h>
+
+static inline void __dma_sync_for_device(void *vaddr, size_t size,
+ enum dma_data_direction direction)
+{
+ switch (direction) {
+ case DMA_FROM_DEVICE:
+ invalidate_dcache_range((unsigned long)vaddr,
+ (unsigned long)(vaddr + size));
+ break;
+ case DMA_TO_DEVICE:
+ /*
+ * We just need to flush the caches here , but Nios2 flush
+ * instruction will do both writeback and invalidate.
+ */
+ case DMA_BIDIRECTIONAL: /* flush and invalidate */
+ flush_dcache_range((unsigned long)vaddr,
+ (unsigned long)(vaddr + size));
+ break;
+ default:
+ BUG();
+ }
+}
+
+static inline void __dma_sync_for_cpu(void *vaddr, size_t size,
+ enum dma_data_direction direction)
+{
+ switch (direction) {
+ case DMA_BIDIRECTIONAL:
+ case DMA_FROM_DEVICE:
+ invalidate_dcache_range((unsigned long)vaddr,
+ (unsigned long)(vaddr + size));
+ break;
+ case DMA_TO_DEVICE:
+ break;
+ default:
+ BUG();
+ }
+}
+
+#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
+#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t flag);
+
+void dma_free_coherent(struct device *dev, size_t size,
+ void *vaddr, dma_addr_t dma_handle);
+
+static inline dma_addr_t dma_map_single(struct device *dev, void *ptr,
+ size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(!valid_dma_direction(direction));
+ __dma_sync_for_device(ptr, size, direction);
+ return virt_to_phys(ptr);
+}
+
+static inline void dma_unmap_single(struct device *dev, dma_addr_t dma_addr,
+ size_t size, enum dma_data_direction direction)
+{
+}
+
+extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+ enum dma_data_direction direction);
+extern dma_addr_t dma_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size, enum dma_data_direction direction);
+extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+ size_t size, enum dma_data_direction direction);
+extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+ int nhwentries, enum dma_data_direction direction);
+extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+ size_t size, enum dma_data_direction direction);
+extern void dma_sync_single_for_device(struct device *dev,
+ dma_addr_t dma_handle, size_t size, enum dma_data_direction direction);
+extern void dma_sync_single_range_for_cpu(struct device *dev,
+ dma_addr_t dma_handle, unsigned long offset, size_t size,
+ enum dma_data_direction direction);
+extern void dma_sync_single_range_for_device(struct device *dev,
+ dma_addr_t dma_handle, unsigned long offset, size_t size,
+ enum dma_data_direction direction);
+extern void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+ int nelems, enum dma_data_direction direction);
+extern void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+ int nelems, enum dma_data_direction direction);
+
+static inline int dma_supported(struct device *dev, u64 mask)
+{
+ return 1;
+}
+
+static inline int dma_set_mask(struct device *dev, u64 mask)
+{
+ if (!dev->dma_mask || !dma_supported(dev, mask))
+ return -EIO;
+
+ *dev->dma_mask = mask;
+
+ return 0;
+}
+
+static inline int dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+{
+ return 0;
+}
+
+/*
+* dma_alloc_noncoherent() returns non-cacheable memory, so there's no need to
+* do any flushing here.
+*/
+static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+ enum dma_data_direction direction)
+{
+}
+
+/* drivers/base/dma-mapping.c */
+extern int dma_common_mmap(struct device *dev, struct vm_area_struct *vma,
+ void *cpu_addr, dma_addr_t dma_addr, size_t size);
+extern int dma_common_get_sgtable(struct device *dev, struct sg_table *sgt,
+ void *cpu_addr, dma_addr_t dma_addr,
+ size_t size);
+
+#define dma_mmap_coherent(d, v, c, h, s) dma_common_mmap(d, v, c, h, s)
+#define dma_get_sgtable(d, t, v, h, s) dma_common_get_sgtable(d, t, v, h, s)
+
+#endif /* _ASM_NIOS2_DMA_MAPPING_H */
--- /dev/null
+/*
+ * Copyright (C) 2011 Tobias Klauser <tklauser@distanz.ch>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef _ASM_NIOS2_ELF_H
+#define _ASM_NIOS2_ELF_H
+
+#include <uapi/asm/elf.h>
+
+/*
+ * This is used to ensure we don't load something for the wrong architecture.
+ */
+#define elf_check_arch(x) ((x)->e_machine == EM_ALTERA_NIOS2)
+
+#define ELF_PLAT_INIT(_r, load_addr)
+
+#define CORE_DUMP_USE_REGSET
+#define ELF_EXEC_PAGESIZE 4096
+
+/* This is the location that an ET_DYN program is loaded if exec'ed. Typical
+ use of this is to invoke "./ld.so someprog" to test out a new version of
+ the loader. We need to make sure that it is out of the way of the program
+ that it will "exec", and that there is sufficient room for the brk. */
+
+#define ELF_ET_DYN_BASE 0xD0000000UL
+
+/* regs is struct pt_regs, pr_reg is elf_gregset_t (which is
+ now struct_user_regs, they are different) */
+
+#define ARCH_HAS_SETUP_ADDITIONAL_PAGES 1
+struct linux_binprm;
+extern int arch_setup_additional_pages(struct linux_binprm *bprm,
+ int uses_interp);
+#define ELF_CORE_COPY_REGS(pr_reg, regs) \
+{ do { \
+ /* Bleech. */ \
+ pr_reg[0] = regs->r8; \
+ pr_reg[1] = regs->r9; \
+ pr_reg[2] = regs->r10; \
+ pr_reg[3] = regs->r11; \
+ pr_reg[4] = regs->r12; \
+ pr_reg[5] = regs->r13; \
+ pr_reg[6] = regs->r14; \
+ pr_reg[7] = regs->r15; \
+ pr_reg[8] = regs->r1; \
+ pr_reg[9] = regs->r2; \
+ pr_reg[10] = regs->r3; \
+ pr_reg[11] = regs->r4; \
+ pr_reg[12] = regs->r5; \
+ pr_reg[13] = regs->r6; \
+ pr_reg[14] = regs->r7; \
+ pr_reg[15] = regs->orig_r2; \
+ pr_reg[16] = regs->ra; \
+ pr_reg[17] = regs->fp; \
+ pr_reg[18] = regs->sp; \
+ pr_reg[19] = regs->gp; \
+ pr_reg[20] = regs->estatus; \
+ pr_reg[21] = regs->ea; \
+ pr_reg[22] = regs->orig_r7; \
+ { \
+ struct switch_stack *sw = ((struct switch_stack *)regs) - 1; \
+ pr_reg[23] = sw->r16; \
+ pr_reg[24] = sw->r17; \
+ pr_reg[25] = sw->r18; \
+ pr_reg[26] = sw->r19; \
+ pr_reg[27] = sw->r20; \
+ pr_reg[28] = sw->r21; \
+ pr_reg[29] = sw->r22; \
+ pr_reg[30] = sw->r23; \
+ pr_reg[31] = sw->fp; \
+ pr_reg[32] = sw->gp; \
+ pr_reg[33] = sw->ra; \
+ } \
+} while (0); }
+
+/* This yields a mask that user programs can use to figure out what
+ instruction set this cpu supports. */
+
+#define ELF_HWCAP (0)
+
+/* This yields a string that ld.so will use to load implementation
+ specific libraries for optimization. This is more specific in
+ intent than poking at uname or /proc/cpuinfo. */
+
+#define ELF_PLATFORM (NULL)
+
+#endif /* _ASM_NIOS2_ELF_H */
--- /dev/null
+/*
+ * Copyright (C) 2010 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2004 Microtronix Datacom Ltd.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_NIOS2_ENTRY_H
+#define _ASM_NIOS2_ENTRY_H
+
+#ifdef __ASSEMBLY__
+
+#include <asm/processor.h>
+#include <asm/registers.h>
+#include <asm/asm-offsets.h>
+
+/*
+ * Standard Nios2 interrupt entry and exit macros.
+ * Must be called with interrupts disabled.
+ */
+.macro SAVE_ALL
+ rdctl r24, estatus
+ andi r24, r24, ESTATUS_EU
+ beq r24, r0, 1f /* In supervisor mode, already on kernel stack */
+
+ movia r24, _current_thread /* Switch to current kernel stack */
+ ldw r24, 0(r24) /* using the thread_info */
+ addi r24, r24, THREAD_SIZE-PT_REGS_SIZE
+ stw sp, PT_SP(r24) /* Save user stack before changing */
+ mov sp, r24
+ br 2f
+
+1 : mov r24, sp
+ addi sp, sp, -PT_REGS_SIZE /* Backup the kernel stack pointer */
+ stw r24, PT_SP(sp)
+2 : stw r1, PT_R1(sp)
+ stw r2, PT_R2(sp)
+ stw r3, PT_R3(sp)
+ stw r4, PT_R4(sp)
+ stw r5, PT_R5(sp)
+ stw r6, PT_R6(sp)
+ stw r7, PT_R7(sp)
+ stw r8, PT_R8(sp)
+ stw r9, PT_R9(sp)
+ stw r10, PT_R10(sp)
+ stw r11, PT_R11(sp)
+ stw r12, PT_R12(sp)
+ stw r13, PT_R13(sp)
+ stw r14, PT_R14(sp)
+ stw r15, PT_R15(sp)
+ stw r2, PT_ORIG_R2(sp)
+ stw r7, PT_ORIG_R7(sp)
+
+ stw ra, PT_RA(sp)
+ stw fp, PT_FP(sp)
+ stw gp, PT_GP(sp)
+ rdctl r24, estatus
+ stw r24, PT_ESTATUS(sp)
+ stw ea, PT_EA(sp)
+.endm
+
+.macro RESTORE_ALL
+ ldw r1, PT_R1(sp) /* Restore registers */
+ ldw r2, PT_R2(sp)
+ ldw r3, PT_R3(sp)
+ ldw r4, PT_R4(sp)
+ ldw r5, PT_R5(sp)
+ ldw r6, PT_R6(sp)
+ ldw r7, PT_R7(sp)
+ ldw r8, PT_R8(sp)
+ ldw r9, PT_R9(sp)
+ ldw r10, PT_R10(sp)
+ ldw r11, PT_R11(sp)
+ ldw r12, PT_R12(sp)
+ ldw r13, PT_R13(sp)
+ ldw r14, PT_R14(sp)
+ ldw r15, PT_R15(sp)
+ ldw ra, PT_RA(sp)
+ ldw fp, PT_FP(sp)
+ ldw gp, PT_GP(sp)
+ ldw r24, PT_ESTATUS(sp)
+ wrctl estatus, r24
+ ldw ea, PT_EA(sp)
+ ldw sp, PT_SP(sp) /* Restore sp last */
+.endm
+
+.macro SAVE_SWITCH_STACK
+ addi sp, sp, -SWITCH_STACK_SIZE
+ stw r16, SW_R16(sp)
+ stw r17, SW_R17(sp)
+ stw r18, SW_R18(sp)
+ stw r19, SW_R19(sp)
+ stw r20, SW_R20(sp)
+ stw r21, SW_R21(sp)
+ stw r22, SW_R22(sp)
+ stw r23, SW_R23(sp)
+ stw fp, SW_FP(sp)
+ stw gp, SW_GP(sp)
+ stw ra, SW_RA(sp)
+.endm
+
+.macro RESTORE_SWITCH_STACK
+ ldw r16, SW_R16(sp)
+ ldw r17, SW_R17(sp)
+ ldw r18, SW_R18(sp)
+ ldw r19, SW_R19(sp)
+ ldw r20, SW_R20(sp)
+ ldw r21, SW_R21(sp)
+ ldw r22, SW_R22(sp)
+ ldw r23, SW_R23(sp)
+ ldw fp, SW_FP(sp)
+ ldw gp, SW_GP(sp)
+ ldw ra, SW_RA(sp)
+ addi sp, sp, SWITCH_STACK_SIZE
+.endm
+
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_NIOS2_ENTRY_H */
--- /dev/null
+/*
+ * Copyright (C) 2014 Altera Corporation
+ * Copyright (C) 2010 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2004 Microtronix Datacom Ltd.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_NIOS2_IO_H
+#define _ASM_NIOS2_IO_H
+
+#include <linux/types.h>
+#include <asm/pgtable-bits.h>
+
+/* PCI is not supported in nios2, set this to 0. */
+#define IO_SPACE_LIMIT 0
+
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+
+#define writeb_relaxed(x, addr) writeb(x, addr)
+#define writew_relaxed(x, addr) writew(x, addr)
+#define writel_relaxed(x, addr) writel(x, addr)
+
+extern void __iomem *__ioremap(unsigned long physaddr, unsigned long size,
+ unsigned long cacheflag);
+extern void __iounmap(void __iomem *addr);
+
+static inline void __iomem *ioremap(unsigned long physaddr, unsigned long size)
+{
+ return __ioremap(physaddr, size, 0);
+}
+
+static inline void __iomem *ioremap_nocache(unsigned long physaddr,
+ unsigned long size)
+{
+ return __ioremap(physaddr, size, 0);
+}
+
+static inline void iounmap(void __iomem *addr)
+{
+ __iounmap(addr);
+}
+
+/* Pages to physical address... */
+#define page_to_phys(page) virt_to_phys(page_to_virt(page))
+#define page_to_bus(page) page_to_virt(page)
+
+/* Macros used for converting between virtual and physical mappings. */
+#define phys_to_virt(vaddr) \
+ ((void *)((unsigned long)(vaddr) | CONFIG_NIOS2_KERNEL_REGION_BASE))
+/* Clear top 3 bits */
+#define virt_to_phys(vaddr) \
+ ((unsigned long)((unsigned long)(vaddr) & ~0xE0000000))
+
+#include <asm-generic/io.h>
+
+#endif /* _ASM_NIOS2_IO_H */
--- /dev/null
+/*
+ * Copyright (C) 2013 Altera Corporation
+ * Copyright (C) 2011 Tobias Klauser <tklauser@distanz.ch>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef _ASM_NIOS2_IRQ_H
+#define _ASM_NIOS2_IRQ_H
+
+#define NIOS2_CPU_NR_IRQS 32
+
+#include <asm-generic/irq.h>
+#include <linux/irqdomain.h>
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#ifndef _ASM_IRQFLAGS_H
+#define _ASM_IRQFLAGS_H
+
+#include <asm/registers.h>
+
+static inline unsigned long arch_local_save_flags(void)
+{
+ return RDCTL(CTL_STATUS);
+}
+
+/*
+ * This will restore ALL status register flags, not only the interrupt
+ * mask flag.
+ */
+static inline void arch_local_irq_restore(unsigned long flags)
+{
+ WRCTL(CTL_STATUS, flags);
+}
+
+static inline void arch_local_irq_disable(void)
+{
+ unsigned long flags;
+
+ flags = arch_local_save_flags();
+ arch_local_irq_restore(flags & ~STATUS_PIE);
+}
+
+static inline void arch_local_irq_enable(void)
+{
+ unsigned long flags;
+
+ flags = arch_local_save_flags();
+ arch_local_irq_restore(flags | STATUS_PIE);
+}
+
+static inline int arch_irqs_disabled_flags(unsigned long flags)
+{
+ return (flags & STATUS_PIE) == 0;
+}
+
+static inline int arch_irqs_disabled(void)
+{
+ return arch_irqs_disabled_flags(arch_local_save_flags());
+}
+
+static inline unsigned long arch_local_irq_save(void)
+{
+ unsigned long flags;
+
+ flags = arch_local_save_flags();
+ arch_local_irq_restore(flags & ~STATUS_PIE);
+ return flags;
+}
+
+#endif /* _ASM_IRQFLAGS_H */
--- /dev/null
+/*
+ * Copyright (C) 2009 Thomas Chou <thomas@wytron.com.tw>
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ */
+
+#ifndef _ASM_NIOS2_LINKAGE_H
+#define _ASM_NIOS2_LINKAGE_H
+
+/* This file is required by include/linux/linkage.h */
+#define __ALIGN .align 4
+#define __ALIGN_STR ".align 4"
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2010 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2004 Microtronix Datacom Ltd.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_NIOS2_MMU_H
+#define _ASM_NIOS2_MMU_H
+
+/* Default "unsigned long" context */
+typedef unsigned long mm_context_t;
+
+#endif /* _ASM_NIOS2_MMU_H */
--- /dev/null
+/*
+ * Copyright (C) 2010 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 1996, 1997, 1998, 1999 by Ralf Baechle
+ * Copyright (C) 1999 Silicon Graphics, Inc.
+ *
+ * based on MIPS asm/mmu_context.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_NIOS2_MMU_CONTEXT_H
+#define _ASM_NIOS2_MMU_CONTEXT_H
+
+#include <asm-generic/mm_hooks.h>
+
+extern void mmu_context_init(void);
+extern unsigned long get_pid_from_context(mm_context_t *ctx);
+
+/*
+ * For the fast tlb miss handlers, we keep a pointer to the current pgd.
+ * processor.
+ */
+extern pgd_t *pgd_current;
+
+static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk)
+{
+}
+
+/*
+ * Initialize the context related info for a new mm_struct instance.
+ *
+ * Set all new contexts to 0, that way the generation will never match
+ * the currently running generation when this context is switched in.
+ */
+static inline int init_new_context(struct task_struct *tsk,
+ struct mm_struct *mm)
+{
+ mm->context = 0;
+ return 0;
+}
+
+/*
+ * Destroy context related info for an mm_struct that is about
+ * to be put to rest.
+ */
+static inline void destroy_context(struct mm_struct *mm)
+{
+}
+
+void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+ struct task_struct *tsk);
+
+static inline void deactivate_mm(struct task_struct *tsk,
+ struct mm_struct *mm)
+{
+}
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+void activate_mm(struct mm_struct *prev, struct mm_struct *next);
+
+#endif /* _ASM_NIOS2_MMU_CONTEXT_H */
--- /dev/null
+#include <asm-generic/mutex-dec.h>
--- /dev/null
+/*
+ * Copyright (C) 2011 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2004 Microtronix Datacom Ltd.
+ *
+ * MMU support based on asm/page.h from mips which is:
+ *
+ * Copyright (C) 1994 - 1999, 2000, 03 Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_NIOS2_PAGE_H
+#define _ASM_NIOS2_PAGE_H
+
+#include <linux/pfn.h>
+#include <linux/const.h>
+
+/*
+ * PAGE_SHIFT determines the page size
+ */
+#define PAGE_SHIFT 12
+#define PAGE_SIZE (_AC(1, UL) << PAGE_SHIFT)
+#define PAGE_MASK (~(PAGE_SIZE - 1))
+
+/*
+ * PAGE_OFFSET -- the first address of the first page of memory.
+ */
+#define PAGE_OFFSET \
+ (CONFIG_NIOS2_MEM_BASE + CONFIG_NIOS2_KERNEL_REGION_BASE)
+
+#ifndef __ASSEMBLY__
+
+/*
+ * This gives the physical RAM offset.
+ */
+#define PHYS_OFFSET CONFIG_NIOS2_MEM_BASE
+
+/*
+ * It's normally defined only for FLATMEM config but it's
+ * used in our early mem init code for all memory models.
+ * So always define it.
+ */
+#define ARCH_PFN_OFFSET PFN_UP(PHYS_OFFSET)
+
+#define clear_page(page) memset((page), 0, PAGE_SIZE)
+#define copy_page(to, from) memcpy((to), (from), PAGE_SIZE)
+
+struct page;
+
+extern void clear_user_page(void *addr, unsigned long vaddr, struct page *page);
+extern void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
+ struct page *to);
+
+/*
+ * These are used to make use of C type-checking.
+ */
+typedef struct page *pgtable_t;
+typedef struct { unsigned long pte; } pte_t;
+typedef struct { unsigned long pgd; } pgd_t;
+typedef struct { unsigned long pgprot; } pgprot_t;
+
+#define pte_val(x) ((x).pte)
+#define pgd_val(x) ((x).pgd)
+#define pgprot_val(x) ((x).pgprot)
+
+#define __pte(x) ((pte_t) { (x) })
+#define __pgd(x) ((pgd_t) { (x) })
+#define __pgprot(x) ((pgprot_t) { (x) })
+
+extern unsigned long memory_start;
+extern unsigned long memory_end;
+extern unsigned long memory_size;
+
+extern struct page *mem_map;
+
+#endif /* !__ASSEMBLY__ */
+
+# define __pa(x) \
+ ((unsigned long)(x) - PAGE_OFFSET + PHYS_OFFSET)
+# define __va(x) \
+ ((void *)((unsigned long)(x) + PAGE_OFFSET - PHYS_OFFSET))
+
+#define page_to_virt(page) \
+ ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET)
+
+# define pfn_to_kaddr(pfn) __va((pfn) << PAGE_SHIFT)
+# define pfn_valid(pfn) ((pfn) >= ARCH_PFN_OFFSET && \
+ (pfn) < max_mapnr)
+
+# define virt_to_page(vaddr) pfn_to_page(PFN_DOWN(virt_to_phys(vaddr)))
+# define virt_addr_valid(vaddr) pfn_valid(PFN_DOWN(virt_to_phys(vaddr)))
+
+# define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | \
+ VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
+
+# define UNCAC_ADDR(addr) \
+ ((void *)((unsigned)(addr) | CONFIG_NIOS2_IO_REGION_BASE))
+# define CAC_ADDR(addr) \
+ ((void *)(((unsigned)(addr) & ~CONFIG_NIOS2_IO_REGION_BASE) | \
+ CONFIG_NIOS2_KERNEL_REGION_BASE))
+
+#include <asm-generic/memory_model.h>
+
+#include <asm-generic/getorder.h>
+
+#endif /* _ASM_NIOS2_PAGE_H */
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 - 2001, 2003 by Ralf Baechle
+ * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc.
+ */
+
+#ifndef _ASM_NIOS2_PGALLOC_H
+#define _ASM_NIOS2_PGALLOC_H
+
+#include <linux/mm.h>
+
+static inline void pmd_populate_kernel(struct mm_struct *mm, pmd_t *pmd,
+ pte_t *pte)
+{
+ set_pmd(pmd, __pmd((unsigned long)pte));
+}
+
+static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd,
+ pgtable_t pte)
+{
+ set_pmd(pmd, __pmd((unsigned long)page_address(pte)));
+}
+#define pmd_pgtable(pmd) pmd_page(pmd)
+
+/*
+ * Initialize a new pmd table with invalid pointers.
+ */
+extern void pmd_init(unsigned long page, unsigned long pagetable);
+
+extern pgd_t *pgd_alloc(struct mm_struct *mm);
+
+static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
+{
+ free_pages((unsigned long)pgd, PGD_ORDER);
+}
+
+static inline pte_t *pte_alloc_one_kernel(struct mm_struct *mm,
+ unsigned long address)
+{
+ pte_t *pte;
+
+ pte = (pte_t *) __get_free_pages(GFP_KERNEL|__GFP_REPEAT|__GFP_ZERO,
+ PTE_ORDER);
+
+ return pte;
+}
+
+static inline pgtable_t pte_alloc_one(struct mm_struct *mm,
+ unsigned long address)
+{
+ struct page *pte;
+
+ pte = alloc_pages(GFP_KERNEL | __GFP_REPEAT, PTE_ORDER);
+ if (pte) {
+ if (!pgtable_page_ctor(pte)) {
+ __free_page(pte);
+ return NULL;
+ }
+ clear_highpage(pte);
+ }
+ return pte;
+}
+
+static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte)
+{
+ free_pages((unsigned long)pte, PTE_ORDER);
+}
+
+static inline void pte_free(struct mm_struct *mm, struct page *pte)
+{
+ pgtable_page_dtor(pte);
+ __free_pages(pte, PTE_ORDER);
+}
+
+#define __pte_free_tlb(tlb, pte, addr) \
+ do { \
+ pgtable_page_dtor(pte); \
+ tlb_remove_page((tlb), (pte)); \
+ } while (0)
+
+#define check_pgt_cache() do { } while (0)
+
+#endif /* _ASM_NIOS2_PGALLOC_H */
--- /dev/null
+/*
+ * Copyright (C) 2011 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2009 Wind River Systems Inc
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_NIOS2_PGTABLE_BITS_H
+#define _ASM_NIOS2_PGTABLE_BITS_H
+
+/*
+ * These are actual hardware defined protection bits in the tlbacc register
+ * which looks like this:
+ *
+ * 31 30 ... 26 25 24 23 22 21 20 19 18 ... 1 0
+ * ignored........ C R W X G PFN............
+ */
+#define _PAGE_GLOBAL (1<<20)
+#define _PAGE_EXEC (1<<21)
+#define _PAGE_WRITE (1<<22)
+#define _PAGE_READ (1<<23)
+#define _PAGE_CACHED (1<<24) /* C: data access cacheable */
+
+/*
+ * Software defined bits. They are ignored by the hardware and always read back
+ * as zero, but can be written as non-zero.
+ */
+#define _PAGE_PRESENT (1<<25) /* PTE contains a translation */
+#define _PAGE_ACCESSED (1<<26) /* page referenced */
+#define _PAGE_DIRTY (1<<27) /* dirty page */
+#define _PAGE_FILE (1<<28) /* PTE used for file mapping or swap */
+
+#endif /* _ASM_NIOS2_PGTABLE_BITS_H */
--- /dev/null
+/*
+ * Copyright (C) 2011 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2009 Wind River Systems Inc
+ *
+ * Based on asm/pgtable-32.h from mips which is:
+ *
+ * Copyright (C) 1994, 95, 96, 97, 98, 99, 2000, 2003 Ralf Baechle
+ * Copyright (C) 1999, 2000, 2001 Silicon Graphics, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_NIOS2_PGTABLE_H
+#define _ASM_NIOS2_PGTABLE_H
+
+#include <linux/io.h>
+#include <linux/bug.h>
+#include <asm/page.h>
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+
+#include <asm/pgtable-bits.h>
+#include <asm-generic/pgtable-nopmd.h>
+
+#define FIRST_USER_ADDRESS 0
+
+#define VMALLOC_START CONFIG_NIOS2_KERNEL_MMU_REGION_BASE
+#define VMALLOC_END (CONFIG_NIOS2_KERNEL_REGION_BASE - 1)
+
+struct mm_struct;
+
+/* Helper macro */
+#define MKP(x, w, r) __pgprot(_PAGE_PRESENT | _PAGE_CACHED | \
+ ((x) ? _PAGE_EXEC : 0) | \
+ ((r) ? _PAGE_READ : 0) | \
+ ((w) ? _PAGE_WRITE : 0))
+/*
+ * These are the macros that generic kernel code needs
+ * (to populate protection_map[])
+ */
+
+/* Remove W bit on private pages for COW support */
+#define __P000 MKP(0, 0, 0)
+#define __P001 MKP(0, 0, 1)
+#define __P010 MKP(0, 0, 0) /* COW */
+#define __P011 MKP(0, 0, 1) /* COW */
+#define __P100 MKP(1, 0, 0)
+#define __P101 MKP(1, 0, 1)
+#define __P110 MKP(1, 0, 0) /* COW */
+#define __P111 MKP(1, 0, 1) /* COW */
+
+/* Shared pages can have exact HW mapping */
+#define __S000 MKP(0, 0, 0)
+#define __S001 MKP(0, 0, 1)
+#define __S010 MKP(0, 1, 0)
+#define __S011 MKP(0, 1, 1)
+#define __S100 MKP(1, 0, 0)
+#define __S101 MKP(1, 0, 1)
+#define __S110 MKP(1, 1, 0)
+#define __S111 MKP(1, 1, 1)
+
+/* Used all over the kernel */
+#define PAGE_KERNEL __pgprot(_PAGE_PRESENT | _PAGE_CACHED | _PAGE_READ | \
+ _PAGE_WRITE | _PAGE_EXEC | _PAGE_GLOBAL)
+
+#define PAGE_SHARED __pgprot(_PAGE_PRESENT | _PAGE_CACHED | _PAGE_READ | \
+ _PAGE_WRITE | _PAGE_ACCESSED)
+
+#define PAGE_COPY MKP(0, 0, 1)
+
+#define PGD_ORDER 0
+#define PTE_ORDER 0
+
+#define PTRS_PER_PGD ((PAGE_SIZE << PGD_ORDER) / sizeof(pgd_t))
+#define PTRS_PER_PTE ((PAGE_SIZE << PTE_ORDER) / sizeof(pte_t))
+
+#define USER_PTRS_PER_PGD \
+ (CONFIG_NIOS2_KERNEL_MMU_REGION_BASE / PGDIR_SIZE)
+
+#define PGDIR_SHIFT 22
+#define PGDIR_SIZE (1UL << PGDIR_SHIFT)
+#define PGDIR_MASK (~(PGDIR_SIZE-1))
+
+/*
+ * ZERO_PAGE is a global shared page that is always zero: used
+ * for zero-mapped memory areas etc..
+ */
+extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
+#define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
+
+extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
+extern pte_t invalid_pte_table[PAGE_SIZE/sizeof(pte_t)];
+
+/*
+ * (pmds are folded into puds so this doesn't get actually called,
+ * but the define is needed for a generic inline function.)
+ */
+static inline void set_pmd(pmd_t *pmdptr, pmd_t pmdval)
+{
+ pmdptr->pud.pgd.pgd = pmdval.pud.pgd.pgd;
+}
+
+/* to find an entry in a page-table-directory */
+#define pgd_index(addr) (((addr) >> PGDIR_SHIFT) & (PTRS_PER_PGD - 1))
+#define pgd_offset(mm, addr) ((mm)->pgd + pgd_index(addr))
+
+static inline int pte_write(pte_t pte) \
+ { return pte_val(pte) & _PAGE_WRITE; }
+static inline int pte_dirty(pte_t pte) \
+ { return pte_val(pte) & _PAGE_DIRTY; }
+static inline int pte_young(pte_t pte) \
+ { return pte_val(pte) & _PAGE_ACCESSED; }
+static inline int pte_file(pte_t pte) \
+ { return pte_val(pte) & _PAGE_FILE; }
+static inline int pte_special(pte_t pte) { return 0; }
+
+#define pgprot_noncached pgprot_noncached
+
+static inline pgprot_t pgprot_noncached(pgprot_t _prot)
+{
+ unsigned long prot = pgprot_val(_prot);
+
+ prot &= ~_PAGE_CACHED;
+
+ return __pgprot(prot);
+}
+
+static inline int pte_none(pte_t pte)
+{
+ return !(pte_val(pte) & ~(_PAGE_GLOBAL|0xf));
+}
+
+static inline int pte_present(pte_t pte) \
+ { return pte_val(pte) & _PAGE_PRESENT; }
+
+/*
+ * The following only work if pte_present() is true.
+ * Undefined behaviour if not..
+ */
+static inline pte_t pte_wrprotect(pte_t pte)
+{
+ pte_val(pte) &= ~_PAGE_WRITE;
+ return pte;
+}
+
+static inline pte_t pte_mkclean(pte_t pte)
+{
+ pte_val(pte) &= ~_PAGE_DIRTY;
+ return pte;
+}
+
+static inline pte_t pte_mkold(pte_t pte)
+{
+ pte_val(pte) &= ~_PAGE_ACCESSED;
+ return pte;
+}
+
+static inline pte_t pte_mkwrite(pte_t pte)
+{
+ pte_val(pte) |= _PAGE_WRITE;
+ return pte;
+}
+
+static inline pte_t pte_mkdirty(pte_t pte)
+{
+ pte_val(pte) |= _PAGE_DIRTY;
+ return pte;
+}
+
+static inline pte_t pte_mkspecial(pte_t pte) { return pte; }
+
+static inline pte_t pte_mkyoung(pte_t pte)
+{
+ pte_val(pte) |= _PAGE_ACCESSED;
+ return pte;
+}
+
+static inline pte_t pte_modify(pte_t pte, pgprot_t newprot)
+{
+ const unsigned long mask = _PAGE_READ | _PAGE_WRITE | _PAGE_EXEC;
+
+ pte_val(pte) = (pte_val(pte) & ~mask) | (pgprot_val(newprot) & mask);
+ return pte;
+}
+
+static inline int pmd_present(pmd_t pmd)
+{
+ return (pmd_val(pmd) != (unsigned long) invalid_pte_table)
+ && (pmd_val(pmd) != 0UL);
+}
+
+static inline void pmd_clear(pmd_t *pmdp)
+{
+ pmd_val(*pmdp) = (unsigned long) invalid_pte_table;
+}
+
+#define pte_pfn(pte) (pte_val(pte) & 0xfffff)
+#define pfn_pte(pfn, prot) (__pte(pfn | pgprot_val(prot)))
+#define pte_page(pte) (pfn_to_page(pte_pfn(pte)))
+
+/*
+ * Store a linux PTE into the linux page table.
+ */
+static inline void set_pte(pte_t *ptep, pte_t pteval)
+{
+ *ptep = pteval;
+}
+
+static inline void set_pte_at(struct mm_struct *mm, unsigned long addr,
+ pte_t *ptep, pte_t pteval)
+{
+ unsigned long paddr = page_to_virt(pte_page(pteval));
+
+ flush_dcache_range(paddr, paddr + PAGE_SIZE);
+ set_pte(ptep, pteval);
+}
+
+static inline int pmd_none(pmd_t pmd)
+{
+ return (pmd_val(pmd) ==
+ (unsigned long) invalid_pte_table) || (pmd_val(pmd) == 0UL);
+}
+
+#define pmd_bad(pmd) (pmd_val(pmd) & ~PAGE_MASK)
+
+static inline void pte_clear(struct mm_struct *mm,
+ unsigned long addr, pte_t *ptep)
+{
+ pte_t null;
+
+ pte_val(null) = (addr >> PAGE_SHIFT) & 0xf;
+
+ set_pte_at(mm, addr, ptep, null);
+ flush_tlb_one(addr);
+}
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define mk_pte(page, prot) (pfn_pte(page_to_pfn(page), prot))
+
+#define pte_unmap(pte) do { } while (0)
+
+/*
+ * Conversion functions: convert a page and protection to a page entry,
+ * and a page entry and page directory to the page they refer to.
+ */
+#define pmd_phys(pmd) virt_to_phys((void *)pmd_val(pmd))
+#define pmd_page(pmd) (pfn_to_page(pmd_phys(pmd) >> PAGE_SHIFT))
+#define pmd_page_vaddr(pmd) pmd_val(pmd)
+
+#define pte_offset_map(dir, addr) \
+ ((pte_t *) page_address(pmd_page(*dir)) + \
+ (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)))
+
+/* to find an entry in a kernel page-table-directory */
+#define pgd_offset_k(addr) pgd_offset(&init_mm, addr)
+
+/* Get the address to the PTE for a vaddr in specific directory */
+#define pte_offset_kernel(dir, addr) \
+ ((pte_t *) pmd_page_vaddr(*(dir)) + \
+ (((addr) >> PAGE_SHIFT) & (PTRS_PER_PTE - 1)))
+
+#define pte_ERROR(e) \
+ pr_err("%s:%d: bad pte %08lx.\n", \
+ __FILE__, __LINE__, pte_val(e))
+#define pgd_ERROR(e) \
+ pr_err("%s:%d: bad pgd %08lx.\n", \
+ __FILE__, __LINE__, pgd_val(e))
+
+/*
+ * Encode and decode a swap entry (must be !pte_none(pte) && !pte_present(pte)
+ * && !pte_file(pte)):
+ *
+ * 31 30 29 28 27 26 25 24 23 22 21 20 19 18 ... 1 0
+ * 0 0 0 0 type. 0 0 0 0 0 0 offset.........
+ *
+ * This gives us up to 2**2 = 4 swap files and 2**20 * 4K = 4G per swap file.
+ *
+ * Note that the offset field is always non-zero, thus !pte_none(pte) is always
+ * true.
+ */
+#define __swp_type(swp) (((swp).val >> 26) & 0x3)
+#define __swp_offset(swp) ((swp).val & 0xfffff)
+#define __swp_entry(type, off) ((swp_entry_t) { (((type) & 0x3) << 26) \
+ | ((off) & 0xfffff) })
+#define __swp_entry_to_pte(swp) ((pte_t) { (swp).val })
+#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) })
+
+/* Encode and decode a nonlinear file mapping entry */
+#define PTE_FILE_MAX_BITS 25
+#define pte_to_pgoff(pte) (pte_val(pte) & 0x1ffffff)
+#define pgoff_to_pte(off) __pte(((off) & 0x1ffffff) | _PAGE_FILE)
+
+#define kern_addr_valid(addr) (1)
+
+#include <asm-generic/pgtable.h>
+
+#define pgtable_cache_init() do { } while (0)
+
+extern void __init paging_init(void);
+extern void __init mmu_init(void);
+
+extern void update_mmu_cache(struct vm_area_struct *vma,
+ unsigned long address, pte_t *pte);
+
+#endif /* _ASM_NIOS2_PGTABLE_H */
--- /dev/null
+/*
+ * Copyright (C) 2013 Altera Corporation
+ * Copyright (C) 2010 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2004 Microtronix Datacom Ltd
+ * Copyright (C) 2001 Ken Hill (khill@microtronix.com)
+ * Vic Phillips (vic@microtronix.com)
+ *
+ * based on SPARC asm/processor_32.h which is:
+ *
+ * Copyright (C) 1994 David S. Miller
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_NIOS2_PROCESSOR_H
+#define _ASM_NIOS2_PROCESSOR_H
+
+#include <asm/ptrace.h>
+#include <asm/registers.h>
+#include <asm/page.h>
+
+#define NIOS2_FLAG_KTHREAD 0x00000001 /* task is a kernel thread */
+
+#define NIOS2_OP_NOP 0x1883a
+#define NIOS2_OP_BREAK 0x3da03a
+
+#ifdef __KERNEL__
+
+#define STACK_TOP TASK_SIZE
+#define STACK_TOP_MAX STACK_TOP
+
+#endif /* __KERNEL__ */
+
+/* Kuser helpers is mapped to this user space address */
+#define KUSER_BASE 0x1000
+#define KUSER_SIZE (PAGE_SIZE)
+#ifndef __ASSEMBLY__
+
+/*
+ * Default implementation of macro that returns current
+ * instruction pointer ("program counter").
+ */
+#define current_text_addr() ({ __label__ _l; _l: &&_l; })
+
+# define TASK_SIZE 0x7FFF0000UL
+# define TASK_UNMAPPED_BASE (PAGE_ALIGN(TASK_SIZE / 3))
+
+/* The Nios processor specific thread struct. */
+struct thread_struct {
+ struct pt_regs *kregs;
+
+ /* Context switch saved kernel state. */
+ unsigned long ksp;
+ unsigned long kpsr;
+};
+
+#define INIT_MMAP \
+ { &init_mm, (0), (0), __pgprot(0x0), VM_READ | VM_WRITE | VM_EXEC }
+
+# define INIT_THREAD { \
+ .kregs = NULL, \
+ .ksp = 0, \
+ .kpsr = 0, \
+}
+
+extern void start_thread(struct pt_regs *regs, unsigned long pc,
+ unsigned long sp);
+
+struct task_struct;
+
+/* Free all resources held by a thread. */
+static inline void release_thread(struct task_struct *dead_task)
+{
+}
+
+/* Free current thread data structures etc.. */
+static inline void exit_thread(void)
+{
+}
+
+/* Return saved PC of a blocked thread. */
+#define thread_saved_pc(tsk) ((tsk)->thread.kregs->ea)
+
+extern unsigned long get_wchan(struct task_struct *p);
+
+/* Prepare to copy thread state - unlazy all lazy status */
+#define prepare_to_copy(tsk) do { } while (0)
+
+#define task_pt_regs(p) \
+ ((struct pt_regs *)(THREAD_SIZE + task_stack_page(p)) - 1)
+
+/* Used by procfs */
+#define KSTK_EIP(tsk) ((tsk)->thread.kregs->ea)
+#define KSTK_ESP(tsk) ((tsk)->thread.kregs->sp)
+
+#define cpu_relax() barrier()
+#define cpu_relax_lowlatency() cpu_relax()
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_NIOS2_PROCESSOR_H */
--- /dev/null
+/*
+ * Copyright (C) 2013 Altera Corporation
+ * Copyright (C) 2010 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2004 Microtronix Datacom Ltd
+ *
+ * based on m68k asm/processor.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_NIOS2_PTRACE_H
+#define _ASM_NIOS2_PTRACE_H
+
+#include <uapi/asm/ptrace.h>
+
+#ifndef __ASSEMBLY__
+#define user_mode(regs) (((regs)->estatus & ESTATUS_EU))
+
+#define instruction_pointer(regs) ((regs)->ra)
+#define profile_pc(regs) instruction_pointer(regs)
+#define user_stack_pointer(regs) ((regs)->sp)
+extern void show_regs(struct pt_regs *);
+
+#define current_pt_regs() \
+ ((struct pt_regs *)((unsigned long)current_thread_info() + THREAD_SIZE)\
+ - 1)
+
+int do_syscall_trace_enter(void);
+void do_syscall_trace_exit(void);
+#endif /* __ASSEMBLY__ */
+#endif /* _ASM_NIOS2_PTRACE_H */
--- /dev/null
+/*
+ * Copyright (C) 2011 Tobias Klauser <tklauser@distanz.ch>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef _ASM_NIOS2_REGISTERS_H
+#define _ASM_NIOS2_REGISTERS_H
+
+#ifndef __ASSEMBLY__
+#include <asm/cpuinfo.h>
+#endif
+
+/* control register numbers */
+#define CTL_STATUS 0
+#define CTL_ESTATUS 1
+#define CTL_BSTATUS 2
+#define CTL_IENABLE 3
+#define CTL_IPENDING 4
+#define CTL_CPUID 5
+#define CTL_RSV1 6
+#define CTL_EXCEPTION 7
+#define CTL_PTEADDR 8
+#define CTL_TLBACC 9
+#define CTL_TLBMISC 10
+#define CTL_RSV2 11
+#define CTL_BADADDR 12
+#define CTL_CONFIG 13
+#define CTL_MPUBASE 14
+#define CTL_MPUACC 15
+
+/* access control registers using GCC builtins */
+#define RDCTL(r) __builtin_rdctl(r)
+#define WRCTL(r, v) __builtin_wrctl(r, v)
+
+/* status register bits */
+#define STATUS_PIE (1 << 0) /* processor interrupt enable */
+#define STATUS_U (1 << 1) /* user mode */
+#define STATUS_EH (1 << 2) /* Exception mode */
+
+/* estatus register bits */
+#define ESTATUS_EPIE (1 << 0) /* processor interrupt enable */
+#define ESTATUS_EU (1 << 1) /* user mode */
+#define ESTATUS_EH (1 << 2) /* Exception mode */
+
+/* tlbmisc register bits */
+#define TLBMISC_PID_SHIFT 4
+#ifndef __ASSEMBLY__
+#define TLBMISC_PID_MASK ((1UL << cpuinfo.tlb_pid_num_bits) - 1)
+#endif
+#define TLBMISC_WAY_MASK 0xf
+#define TLBMISC_WAY_SHIFT 20
+
+#define TLBMISC_PID (TLBMISC_PID_MASK << TLBMISC_PID_SHIFT) /* TLB PID */
+#define TLBMISC_WE (1 << 18) /* TLB write enable */
+#define TLBMISC_RD (1 << 19) /* TLB read */
+#define TLBMISC_WAY (TLBMISC_WAY_MASK << TLBMISC_WAY_SHIFT) /* TLB way */
+
+#endif /* _ASM_NIOS2_REGISTERS_H */
--- /dev/null
+/*
+ * Copyright (C) 2011 Tobias Klauser <tklauser@distanz.ch>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef _ASM_NIOS2_SETUP_H
+#define _ASM_NIOS2_SETUP_H
+
+#include <asm-generic/setup.h>
+
+#ifndef __ASSEMBLY__
+#ifdef __KERNEL__
+
+extern char exception_handler_hook[];
+extern char fast_handler[];
+extern char fast_handler_end[];
+
+extern void pagetable_init(void);
+
+extern void setup_early_printk(void);
+
+#endif/* __KERNEL__ */
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_NIOS2_SETUP_H */
--- /dev/null
+/*
+ * Copyright Altera Corporation (C) 2013. All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#ifndef _NIOS2_SIGNAL_H
+#define _NIOS2_SIGNAL_H
+
+#include <uapi/asm/signal.h>
+
+#endif /* _NIOS2_SIGNAL_H */
--- /dev/null
+/*
+ * Copyright (C) 2004 Microtronix Datacom Ltd
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_NIOS2_STRING_H
+#define _ASM_NIOS2_STRING_H
+
+#ifdef __KERNEL__
+
+#define __HAVE_ARCH_MEMSET
+#define __HAVE_ARCH_MEMCPY
+#define __HAVE_ARCH_MEMMOVE
+
+extern void *memset(void *s, int c, size_t count);
+extern void *memcpy(void *d, const void *s, size_t count);
+extern void *memmove(void *d, const void *s, size_t count);
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_NIOS2_STRING_H */
--- /dev/null
+/*
+ * Copyright (C) 2004 Microtronix Datacom Ltd.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+#ifndef _ASM_NIOS2_SWITCH_TO_H
+#define _ASM_NIOS2_SWITCH_TO_H
+
+/*
+ * switch_to(n) should switch tasks to task ptr, first checking that
+ * ptr isn't the current task, in which case it does nothing. This
+ * also clears the TS-flag if the task we switched to has used the
+ * math co-processor latest.
+ */
+#define switch_to(prev, next, last) \
+{ \
+ void *_last; \
+ __asm__ __volatile__ ( \
+ "mov r4, %1\n" \
+ "mov r5, %2\n" \
+ "call resume\n" \
+ "mov %0,r4\n" \
+ : "=r" (_last) \
+ : "r" (prev), "r" (next) \
+ : "r4", "r5", "r7", "r8", "ra"); \
+ (last) = _last; \
+}
+
+#endif /* _ASM_NIOS2_SWITCH_TO_H */
--- /dev/null
+/*
+ * Copyright Altera Corporation (C) <2014>. All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __ASM_NIOS2_SYSCALL_H__
+#define __ASM_NIOS2_SYSCALL_H__
+
+#include <linux/err.h>
+#include <linux/sched.h>
+
+static inline int syscall_get_nr(struct task_struct *task, struct pt_regs *regs)
+{
+ return regs->r2;
+}
+
+static inline void syscall_rollback(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ regs->r2 = regs->orig_r2;
+ regs->r7 = regs->orig_r7;
+}
+
+static inline long syscall_get_error(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ return regs->r7 ? regs->r2 : 0;
+}
+
+static inline long syscall_get_return_value(struct task_struct *task,
+ struct pt_regs *regs)
+{
+ return regs->r2;
+}
+
+static inline void syscall_set_return_value(struct task_struct *task,
+ struct pt_regs *regs, int error, long val)
+{
+ if (error) {
+ /* error < 0, but nios2 uses > 0 return value */
+ regs->r2 = -error;
+ regs->r7 = 1;
+ } else {
+ regs->r2 = val;
+ regs->r7 = 0;
+ }
+}
+
+static inline void syscall_get_arguments(struct task_struct *task,
+ struct pt_regs *regs, unsigned int i, unsigned int n,
+ unsigned long *args)
+{
+ BUG_ON(i + n > 6);
+
+ switch (i) {
+ case 0:
+ if (!n--)
+ break;
+ *args++ = regs->r4;
+ case 1:
+ if (!n--)
+ break;
+ *args++ = regs->r5;
+ case 2:
+ if (!n--)
+ break;
+ *args++ = regs->r6;
+ case 3:
+ if (!n--)
+ break;
+ *args++ = regs->r7;
+ case 4:
+ if (!n--)
+ break;
+ *args++ = regs->r8;
+ case 5:
+ if (!n--)
+ break;
+ *args++ = regs->r9;
+ case 6:
+ if (!n--)
+ break;
+ default:
+ BUG();
+ }
+}
+
+static inline void syscall_set_arguments(struct task_struct *task,
+ struct pt_regs *regs, unsigned int i, unsigned int n,
+ const unsigned long *args)
+{
+ BUG_ON(i + n > 6);
+
+ switch (i) {
+ case 0:
+ if (!n--)
+ break;
+ regs->r4 = *args++;
+ case 1:
+ if (!n--)
+ break;
+ regs->r5 = *args++;
+ case 2:
+ if (!n--)
+ break;
+ regs->r6 = *args++;
+ case 3:
+ if (!n--)
+ break;
+ regs->r7 = *args++;
+ case 4:
+ if (!n--)
+ break;
+ regs->r8 = *args++;
+ case 5:
+ if (!n--)
+ break;
+ regs->r9 = *args++;
+ case 6:
+ if (!n)
+ break;
+ default:
+ BUG();
+ }
+}
+
+#endif
--- /dev/null
+/*
+ * Copyright Altera Corporation (C) 2013. All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#ifndef __ASM_NIOS2_SYSCALLS_H
+#define __ASM_NIOS2_SYSCALLS_H
+
+int sys_cacheflush(unsigned long addr, unsigned long len,
+ unsigned int op);
+
+#include <asm-generic/syscalls.h>
+
+#endif /* __ASM_NIOS2_SYSCALLS_H */
--- /dev/null
+/*
+ * NiosII low-level thread information
+ *
+ * Copyright (C) 2011 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2004 Microtronix Datacom Ltd.
+ *
+ * Based on asm/thread_info_no.h from m68k which is:
+ *
+ * Copyright (C) 2002 David Howells <dhowells@redhat.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_NIOS2_THREAD_INFO_H
+#define _ASM_NIOS2_THREAD_INFO_H
+
+#ifdef __KERNEL__
+
+/*
+ * Size of the kernel stack for each process.
+ */
+#define THREAD_SIZE_ORDER 1
+#define THREAD_SIZE 8192 /* 2 * PAGE_SIZE */
+
+#ifndef __ASSEMBLY__
+
+typedef struct {
+ unsigned long seg;
+} mm_segment_t;
+
+/*
+ * low level task data that entry.S needs immediate access to
+ * - this struct should fit entirely inside of one cache line
+ * - this struct shares the supervisor stack pages
+ * - if the contents of this structure are changed, the assembly constants
+ * must also be changed
+ */
+struct thread_info {
+ struct task_struct *task; /* main task structure */
+ struct exec_domain *exec_domain; /* execution domain */
+ unsigned long flags; /* low level flags */
+ __u32 cpu; /* current CPU */
+ int preempt_count; /* 0 => preemptable,<0 => BUG */
+ mm_segment_t addr_limit; /* thread address space:
+ 0-0x7FFFFFFF for user-thead
+ 0-0xFFFFFFFF for kernel-thread
+ */
+ struct restart_block restart_block;
+ struct pt_regs *regs;
+};
+
+/*
+ * macros/functions for gaining access to the thread information structure
+ *
+ * preempt_count needs to be 1 initially, until the scheduler is functional.
+ */
+#define INIT_THREAD_INFO(tsk) \
+{ \
+ .task = &tsk, \
+ .exec_domain = &default_exec_domain, \
+ .flags = 0, \
+ .cpu = 0, \
+ .preempt_count = INIT_PREEMPT_COUNT, \
+ .addr_limit = KERNEL_DS, \
+ .restart_block = { \
+ .fn = do_no_restart_syscall, \
+ }, \
+}
+
+#define init_thread_info (init_thread_union.thread_info)
+#define init_stack (init_thread_union.stack)
+
+/* how to get the thread information struct from C */
+static inline struct thread_info *current_thread_info(void)
+{
+ register unsigned long sp asm("sp");
+
+ return (struct thread_info *)(sp & ~(THREAD_SIZE - 1));
+}
+#endif /* !__ASSEMBLY__ */
+
+/*
+ * thread information flags
+ * - these are process state flags that various assembly files may need to
+ * access
+ * - pending work-to-be-done flags are in LSW
+ * - other flags in MSW
+ */
+#define TIF_SYSCALL_TRACE 0 /* syscall trace active */
+#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */
+#define TIF_SIGPENDING 2 /* signal pending */
+#define TIF_NEED_RESCHED 3 /* rescheduling necessary */
+#define TIF_MEMDIE 4 /* is terminating due to OOM killer */
+#define TIF_SECCOMP 5 /* secure computing */
+#define TIF_SYSCALL_AUDIT 6 /* syscall auditing active */
+#define TIF_RESTORE_SIGMASK 9 /* restore signal mask in do_signal() */
+
+#define TIF_POLLING_NRFLAG 16 /* true if poll_idle() is polling
+ TIF_NEED_RESCHED */
+
+#define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE)
+#define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME)
+#define _TIF_SIGPENDING (1 << TIF_SIGPENDING)
+#define _TIF_NEED_RESCHED (1 << TIF_NEED_RESCHED)
+#define _TIF_SECCOMP (1 << TIF_SECCOMP)
+#define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT)
+#define _TIF_RESTORE_SIGMASK (1 << TIF_RESTORE_SIGMASK)
+#define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG)
+
+/* work to do on interrupt/exception return */
+#define _TIF_WORK_MASK 0x0000FFFE
+
+/* work to do on any return to u-space */
+# define _TIF_ALLWORK_MASK 0x0000FFFF
+
+#endif /* __KERNEL__ */
+
+#endif /* _ASM_NIOS2_THREAD_INFO_H */
--- /dev/null
+/* Copyright Altera Corporation (C) 2014. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2,
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef _ASM_NIOS2_TIMEX_H
+#define _ASM_NIOS2_TIMEX_H
+
+typedef unsigned long cycles_t;
+
+extern cycles_t get_cycles(void);
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2010 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2009 Wind River Systems Inc
+ * Copyright (C) 2004 Microtronix Datacom Ltd.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_NIOS2_TLB_H
+#define _ASM_NIOS2_TLB_H
+
+#define tlb_flush(tlb) flush_tlb_mm((tlb)->mm)
+
+extern void set_mmu_pid(unsigned long pid);
+
+/*
+ * NiosII doesn't need any special per-pte or per-vma handling, except
+ * we need to flush cache for the area to be unmapped.
+ */
+#define tlb_start_vma(tlb, vma) \
+ do { \
+ if (!tlb->fullmm) \
+ flush_cache_range(vma, vma->vm_start, vma->vm_end); \
+ } while (0)
+
+#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+
+#include <linux/pagemap.h>
+#include <asm-generic/tlb.h>
+
+#endif /* _ASM_NIOS2_TLB_H */
--- /dev/null
+/*
+ * Copyright (C) 2010 Tobias Klauser <tklauser@distanz.ch>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifndef _ASM_NIOS2_TLBFLUSH_H
+#define _ASM_NIOS2_TLBFLUSH_H
+
+struct mm_struct;
+
+/*
+ * TLB flushing:
+ *
+ * - flush_tlb_all() flushes all processes TLB entries
+ * - flush_tlb_mm(mm) flushes the specified mm context TLB entries
+ * - flush_tlb_page(vma, vmaddr) flushes one page
+ * - flush_tlb_range(vma, start, end) flushes a range of pages
+ * - flush_tlb_kernel_range(start, end) flushes a range of kernel pages
+ */
+extern void flush_tlb_all(void);
+extern void flush_tlb_mm(struct mm_struct *mm);
+extern void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+ unsigned long end);
+extern void flush_tlb_kernel_range(unsigned long start, unsigned long end);
+extern void flush_tlb_one(unsigned long vaddr);
+
+static inline void flush_tlb_page(struct vm_area_struct *vma,
+ unsigned long addr)
+{
+ flush_tlb_one(addr);
+}
+
+#endif /* _ASM_NIOS2_TLBFLUSH_H */
--- /dev/null
+/*
+ * Copyright (C) 2011 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2004 Microtronix Datacom Ltd.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_NIOS2_TRAPS_H
+#define _ASM_NIOS2_TRAPS_H
+
+#define TRAP_ID_SYSCALL 0
+
+#ifndef __ASSEMBLY__
+void _exception(int signo, struct pt_regs *regs, int code, unsigned long addr);
+#endif
+
+#endif /* _ASM_NIOS2_TRAPS_H */
--- /dev/null
+/*
+ * User space memory access functions for Nios II
+ *
+ * Copyright (C) 2010-2011, Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2009, Wind River Systems Inc
+ * Implemented by fredrik.markstrom@gmail.com and ivarholmqvist@gmail.com
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_NIOS2_UACCESS_H
+#define _ASM_NIOS2_UACCESS_H
+
+#include <linux/errno.h>
+#include <linux/thread_info.h>
+#include <linux/string.h>
+
+#include <asm/page.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+struct exception_table_entry {
+ unsigned long insn;
+ unsigned long fixup;
+};
+
+extern int fixup_exception(struct pt_regs *regs);
+
+/*
+ * Segment stuff
+ */
+#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
+#define USER_DS MAKE_MM_SEG(0x80000000UL)
+#define KERNEL_DS MAKE_MM_SEG(0)
+
+#define get_ds() (KERNEL_DS)
+
+#define get_fs() (current_thread_info()->addr_limit)
+#define set_fs(seg) (current_thread_info()->addr_limit = (seg))
+
+#define segment_eq(a, b) ((a).seg == (b).seg)
+
+#define __access_ok(addr, len) \
+ (((signed long)(((long)get_fs().seg) & \
+ ((long)(addr) | (((long)(addr)) + (len)) | (len)))) == 0)
+
+#define access_ok(type, addr, len) \
+ likely(__access_ok((unsigned long)(addr), (unsigned long)(len)))
+
+# define __EX_TABLE_SECTION ".section __ex_table,\"a\"\n"
+
+/*
+ * Zero Userspace
+ */
+
+static inline unsigned long __must_check __clear_user(void __user *to,
+ unsigned long n)
+{
+ __asm__ __volatile__ (
+ "1: stb zero, 0(%1)\n"
+ " addi %0, %0, -1\n"
+ " addi %1, %1, 1\n"
+ " bne %0, zero, 1b\n"
+ "2:\n"
+ __EX_TABLE_SECTION
+ ".word 1b, 2b\n"
+ ".previous\n"
+ : "=r" (n), "=r" (to)
+ : "0" (n), "1" (to)
+ );
+
+ return n;
+}
+
+static inline unsigned long __must_check clear_user(void __user *to,
+ unsigned long n)
+{
+ if (!access_ok(VERIFY_WRITE, to, n))
+ return n;
+ return __clear_user(to, n);
+}
+
+extern long __copy_from_user(void *to, const void __user *from,
+ unsigned long n);
+extern long __copy_to_user(void __user *to, const void *from, unsigned long n);
+
+static inline long copy_from_user(void *to, const void __user *from,
+ unsigned long n)
+{
+ if (!access_ok(VERIFY_READ, from, n))
+ return n;
+ return __copy_from_user(to, from, n);
+}
+
+static inline long copy_to_user(void __user *to, const void *from,
+ unsigned long n)
+{
+ if (!access_ok(VERIFY_WRITE, to, n))
+ return n;
+ return __copy_to_user(to, from, n);
+}
+
+extern long strncpy_from_user(char *__to, const char __user *__from,
+ long __len);
+extern long strnlen_user(const char __user *s, long n);
+
+#define __copy_from_user_inatomic __copy_from_user
+#define __copy_to_user_inatomic __copy_to_user
+
+/* Optimized macros */
+#define __get_user_asm(val, insn, addr, err) \
+{ \
+ __asm__ __volatile__( \
+ " movi %0, %3\n" \
+ "1: " insn " %1, 0(%2)\n" \
+ " movi %0, 0\n" \
+ "2:\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .word 1b, 2b\n" \
+ " .previous" \
+ : "=&r" (err), "=r" (val) \
+ : "r" (addr), "i" (-EFAULT)); \
+}
+
+#define __get_user_unknown(val, size, ptr, err) do { \
+ err = 0; \
+ if (copy_from_user(&(val), ptr, size)) { \
+ err = -EFAULT; \
+ } \
+ } while (0)
+
+#define __get_user_common(val, size, ptr, err) \
+do { \
+ switch (size) { \
+ case 1: \
+ __get_user_asm(val, "ldbu", ptr, err); \
+ break; \
+ case 2: \
+ __get_user_asm(val, "ldhu", ptr, err); \
+ break; \
+ case 4: \
+ __get_user_asm(val, "ldw", ptr, err); \
+ break; \
+ default: \
+ __get_user_unknown(val, size, ptr, err); \
+ break; \
+ } \
+} while (0)
+
+#define __get_user(x, ptr) \
+ ({ \
+ long __gu_err = -EFAULT; \
+ const __typeof__(*(ptr)) __user *__gu_ptr = (ptr); \
+ unsigned long __gu_val; \
+ __get_user_common(__gu_val, sizeof(*(ptr)), __gu_ptr, __gu_err);\
+ (x) = (__typeof__(x))__gu_val; \
+ __gu_err; \
+ })
+
+#define get_user(x, ptr) \
+({ \
+ long __gu_err = -EFAULT; \
+ const __typeof__(*(ptr)) __user *__gu_ptr = (ptr); \
+ unsigned long __gu_val = 0; \
+ if (access_ok(VERIFY_READ, __gu_ptr, sizeof(*__gu_ptr))) \
+ __get_user_common(__gu_val, sizeof(*__gu_ptr), \
+ __gu_ptr, __gu_err); \
+ (x) = (__typeof__(x))__gu_val; \
+ __gu_err; \
+})
+
+#define __put_user_asm(val, insn, ptr, err) \
+{ \
+ __asm__ __volatile__( \
+ " movi %0, %3\n" \
+ "1: " insn " %1, 0(%2)\n" \
+ " movi %0, 0\n" \
+ "2:\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .word 1b, 2b\n" \
+ " .previous\n" \
+ : "=&r" (err) \
+ : "r" (val), "r" (ptr), "i" (-EFAULT)); \
+}
+
+#define put_user(x, ptr) \
+({ \
+ long __pu_err = -EFAULT; \
+ __typeof__(*(ptr)) __user *__pu_ptr = (ptr); \
+ __typeof__(*(ptr)) __pu_val = (__typeof(*ptr))(x); \
+ if (access_ok(VERIFY_WRITE, __pu_ptr, sizeof(*__pu_ptr))) { \
+ switch (sizeof(*__pu_ptr)) { \
+ case 1: \
+ __put_user_asm(__pu_val, "stb", __pu_ptr, __pu_err); \
+ break; \
+ case 2: \
+ __put_user_asm(__pu_val, "sth", __pu_ptr, __pu_err); \
+ break; \
+ case 4: \
+ __put_user_asm(__pu_val, "stw", __pu_ptr, __pu_err); \
+ break; \
+ default: \
+ /* XXX: This looks wrong... */ \
+ __pu_err = 0; \
+ if (copy_to_user(__pu_ptr, &(__pu_val), \
+ sizeof(*__pu_ptr))) \
+ __pu_err = -EFAULT; \
+ break; \
+ } \
+ } \
+ __pu_err; \
+})
+
+#define __put_user(x, ptr) put_user(x, ptr)
+
+#endif /* _ASM_NIOS2_UACCESS_H */
--- /dev/null
+/*
+ * Copyright (C) 2010 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2004 Microtronix Datacom Ltd
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _ASM_NIOS2_UCONTEXT_H
+#define _ASM_NIOS2_UCONTEXT_H
+
+typedef int greg_t;
+#define NGREG 32
+typedef greg_t gregset_t[NGREG];
+
+struct mcontext {
+ int version;
+ gregset_t gregs;
+};
+
+#define MCONTEXT_VERSION 2
+
+struct ucontext {
+ unsigned long uc_flags;
+ struct ucontext *uc_link;
+ stack_t uc_stack;
+ struct mcontext uc_mcontext;
+ sigset_t uc_sigmask; /* mask last for extensibility */
+};
+
+#endif
--- /dev/null
+include include/uapi/asm-generic/Kbuild.asm
+
+header-y += elf.h
+header-y += ucontext.h
--- /dev/null
+/*
+ * Copyright (C) 2009 Thomas Chou <thomas@wytron.com.tw>
+ * Copyright (C) 2004 Microtronix Datacom Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef _ASM_NIOS2_BYTEORDER_H
+#define _ASM_NIOS2_BYTEORDER_H
+
+#include <linux/byteorder/little_endian.h>
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2011 Tobias Klauser <tklauser@distanz.ch>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+
+#ifndef _UAPI_ASM_NIOS2_ELF_H
+#define _UAPI_ASM_NIOS2_ELF_H
+
+#include <linux/ptrace.h>
+
+/* Relocation types */
+#define R_NIOS2_NONE 0
+#define R_NIOS2_S16 1
+#define R_NIOS2_U16 2
+#define R_NIOS2_PCREL16 3
+#define R_NIOS2_CALL26 4
+#define R_NIOS2_IMM5 5
+#define R_NIOS2_CACHE_OPX 6
+#define R_NIOS2_IMM6 7
+#define R_NIOS2_IMM8 8
+#define R_NIOS2_HI16 9
+#define R_NIOS2_LO16 10
+#define R_NIOS2_HIADJ16 11
+#define R_NIOS2_BFD_RELOC_32 12
+#define R_NIOS2_BFD_RELOC_16 13
+#define R_NIOS2_BFD_RELOC_8 14
+#define R_NIOS2_GPREL 15
+#define R_NIOS2_GNU_VTINHERIT 16
+#define R_NIOS2_GNU_VTENTRY 17
+#define R_NIOS2_UJMP 18
+#define R_NIOS2_CJMP 19
+#define R_NIOS2_CALLR 20
+#define R_NIOS2_ALIGN 21
+/* Keep this the last entry. */
+#define R_NIOS2_NUM 22
+
+typedef unsigned long elf_greg_t;
+
+#define ELF_NGREG \
+ ((sizeof(struct pt_regs) + sizeof(struct switch_stack)) / \
+ sizeof(elf_greg_t))
+typedef elf_greg_t elf_gregset_t[ELF_NGREG];
+
+typedef unsigned long elf_fpregset_t;
+
+/*
+ * These are used to set parameters in the core dumps.
+ */
+#define ELF_CLASS ELFCLASS32
+#define ELF_DATA ELFDATA2LSB
+#define ELF_ARCH EM_ALTERA_NIOS2
+
+#endif /* _UAPI_ASM_NIOS2_ELF_H */
--- /dev/null
+/*
+ * Copyright (C) 2010 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2004 Microtronix Datacom Ltd
+ *
+ * based on m68k asm/processor.h
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef _UAPI_ASM_NIOS2_PTRACE_H
+#define _UAPI_ASM_NIOS2_PTRACE_H
+
+#ifndef __ASSEMBLY__
+
+/*
+ * Register numbers used by 'ptrace' system call interface.
+ */
+
+/* GP registers */
+#define PTR_R0 0
+#define PTR_R1 1
+#define PTR_R2 2
+#define PTR_R3 3
+#define PTR_R4 4
+#define PTR_R5 5
+#define PTR_R6 6
+#define PTR_R7 7
+#define PTR_R8 8
+#define PTR_R9 9
+#define PTR_R10 10
+#define PTR_R11 11
+#define PTR_R12 12
+#define PTR_R13 13
+#define PTR_R14 14
+#define PTR_R15 15
+#define PTR_R16 16
+#define PTR_R17 17
+#define PTR_R18 18
+#define PTR_R19 19
+#define PTR_R20 20
+#define PTR_R21 21
+#define PTR_R22 22
+#define PTR_R23 23
+#define PTR_R24 24
+#define PTR_R25 25
+#define PTR_GP 26
+#define PTR_SP 27
+#define PTR_FP 28
+#define PTR_EA 29
+#define PTR_BA 30
+#define PTR_RA 31
+/* Control registers */
+#define PTR_PC 32
+#define PTR_STATUS 33
+#define PTR_ESTATUS 34
+#define PTR_BSTATUS 35
+#define PTR_IENABLE 36
+#define PTR_IPENDING 37
+#define PTR_CPUID 38
+#define PTR_CTL6 39
+#define PTR_CTL7 40
+#define PTR_PTEADDR 41
+#define PTR_TLBACC 42
+#define PTR_TLBMISC 43
+
+#define NUM_PTRACE_REG (PTR_TLBMISC + 1)
+
+/* this struct defines the way the registers are stored on the
+ stack during a system call.
+
+ There is a fake_regs in setup.c that has to match pt_regs.*/
+
+struct pt_regs {
+ unsigned long r8; /* r8-r15 Caller-saved GP registers */
+ unsigned long r9;
+ unsigned long r10;
+ unsigned long r11;
+ unsigned long r12;
+ unsigned long r13;
+ unsigned long r14;
+ unsigned long r15;
+ unsigned long r1; /* Assembler temporary */
+ unsigned long r2; /* Retval LS 32bits */
+ unsigned long r3; /* Retval MS 32bits */
+ unsigned long r4; /* r4-r7 Register arguments */
+ unsigned long r5;
+ unsigned long r6;
+ unsigned long r7;
+ unsigned long orig_r2; /* Copy of r2 ?? */
+ unsigned long ra; /* Return address */
+ unsigned long fp; /* Frame pointer */
+ unsigned long sp; /* Stack pointer */
+ unsigned long gp; /* Global pointer */
+ unsigned long estatus;
+ unsigned long ea; /* Exception return address (pc) */
+ unsigned long orig_r7;
+};
+
+/*
+ * This is the extended stack used by signal handlers and the context
+ * switcher: it's pushed after the normal "struct pt_regs".
+ */
+struct switch_stack {
+ unsigned long r16; /* r16-r23 Callee-saved GP registers */
+ unsigned long r17;
+ unsigned long r18;
+ unsigned long r19;
+ unsigned long r20;
+ unsigned long r21;
+ unsigned long r22;
+ unsigned long r23;
+ unsigned long fp;
+ unsigned long gp;
+ unsigned long ra;
+};
+
+#endif /* __ASSEMBLY__ */
+#endif /* _UAPI_ASM_NIOS2_PTRACE_H */
--- /dev/null
+/*
+ * Copyright (C) 2004, Microtronix Datacom Ltd.
+ *
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
+ * NON INFRINGEMENT. See the GNU General Public License for more
+ * details.
+ */
+
+#ifndef _ASM_NIOS2_SIGCONTEXT_H
+#define _ASM_NIOS2_SIGCONTEXT_H
+
+#include <asm/ptrace.h>
+
+struct sigcontext {
+ struct pt_regs regs;
+ unsigned long sc_mask; /* old sigmask */
+};
+
+#endif
--- /dev/null
+/*
+ * Copyright Altera Corporation (C) 2013. All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#ifndef _ASM_NIOS2_SIGNAL_H
+#define _ASM_NIOS2_SIGNAL_H
+
+#define SA_RESTORER 0x04000000
+#include <asm-generic/signal.h>
+
+#endif /* _ASM_NIOS2_SIGNAL_H */
--- /dev/null
+/*
+ * Copyright (C) 2012 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2011 Pyramid Technical Consultants, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#ifndef _ASM_NIOS2_SWAB_H
+#define _ASM_NIOS2_SWAB_H
+
+#include <linux/types.h>
+#include <asm-generic/swab.h>
+
+#ifdef CONFIG_NIOS2_CI_SWAB_SUPPORT
+#ifdef __GNUC__
+
+#define __nios2_swab(x) \
+ __builtin_custom_ini(CONFIG_NIOS2_CI_SWAB_NO, (x))
+
+static inline __attribute__((const)) __u16 __arch_swab16(__u16 x)
+{
+ return (__u16) __nios2_swab(((__u32) x) << 16);
+}
+#define __arch_swab16 __arch_swab16
+
+static inline __attribute__((const)) __u32 __arch_swab32(__u32 x)
+{
+ return (__u32) __nios2_swab(x);
+}
+#define __arch_swab32 __arch_swab32
+
+#endif /* __GNUC__ */
+#endif /* CONFIG_NIOS2_CI_SWAB_SUPPORT */
+
+#endif /* _ASM_NIOS2_SWAB_H */
--- /dev/null
+/*
+ * Copyright (C) 2013 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+ #define sys_mmap2 sys_mmap_pgoff
+
+/* Use the standard ABI for syscalls */
+#include <asm-generic/unistd.h>
+
+/* Additional Nios II specific syscalls. */
+#define __NR_cacheflush (__NR_arch_specific_syscall)
+__SYSCALL(__NR_cacheflush, sys_cacheflush)
--- /dev/null
+#
+# Makefile for the nios2 linux kernel.
+#
+
+extra-y += head.o
+extra-y += vmlinux.lds
+
+obj-y += cpuinfo.o
+obj-y += entry.o
+obj-y += insnemu.o
+obj-y += irq.o
+obj-y += nios2_ksyms.o
+obj-y += process.o
+obj-y += prom.o
+obj-y += ptrace.o
+obj-y += setup.o
+obj-y += signal.o
+obj-y += sys_nios2.o
+obj-y += syscall_table.o
+obj-y += time.o
+obj-y += traps.o
+
+obj-$(CONFIG_MODULES) += module.o
+obj-$(CONFIG_NIOS2_ALIGNMENT_TRAP) += misaligned.o
--- /dev/null
+/*
+ * Copyright (C) 2011 Tobias Klauser <tklauser@distanz.ch>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <linux/stddef.h>
+#include <linux/sched.h>
+#include <linux/kernel_stat.h>
+#include <linux/ptrace.h>
+#include <linux/hardirq.h>
+#include <linux/thread_info.h>
+#include <linux/kbuild.h>
+
+int main(void)
+{
+ /* struct task_struct */
+ OFFSET(TASK_THREAD, task_struct, thread);
+ BLANK();
+
+ /* struct thread_struct */
+ OFFSET(THREAD_KSP, thread_struct, ksp);
+ OFFSET(THREAD_KPSR, thread_struct, kpsr);
+ BLANK();
+
+ /* struct pt_regs */
+ OFFSET(PT_ORIG_R2, pt_regs, orig_r2);
+ OFFSET(PT_ORIG_R7, pt_regs, orig_r7);
+
+ OFFSET(PT_R1, pt_regs, r1);
+ OFFSET(PT_R2, pt_regs, r2);
+ OFFSET(PT_R3, pt_regs, r3);
+ OFFSET(PT_R4, pt_regs, r4);
+ OFFSET(PT_R5, pt_regs, r5);
+ OFFSET(PT_R6, pt_regs, r6);
+ OFFSET(PT_R7, pt_regs, r7);
+ OFFSET(PT_R8, pt_regs, r8);
+ OFFSET(PT_R9, pt_regs, r9);
+ OFFSET(PT_R10, pt_regs, r10);
+ OFFSET(PT_R11, pt_regs, r11);
+ OFFSET(PT_R12, pt_regs, r12);
+ OFFSET(PT_R13, pt_regs, r13);
+ OFFSET(PT_R14, pt_regs, r14);
+ OFFSET(PT_R15, pt_regs, r15);
+ OFFSET(PT_EA, pt_regs, ea);
+ OFFSET(PT_RA, pt_regs, ra);
+ OFFSET(PT_FP, pt_regs, fp);
+ OFFSET(PT_SP, pt_regs, sp);
+ OFFSET(PT_GP, pt_regs, gp);
+ OFFSET(PT_ESTATUS, pt_regs, estatus);
+ DEFINE(PT_REGS_SIZE, sizeof(struct pt_regs));
+ BLANK();
+
+ /* struct switch_stack */
+ OFFSET(SW_R16, switch_stack, r16);
+ OFFSET(SW_R17, switch_stack, r17);
+ OFFSET(SW_R18, switch_stack, r18);
+ OFFSET(SW_R19, switch_stack, r19);
+ OFFSET(SW_R20, switch_stack, r20);
+ OFFSET(SW_R21, switch_stack, r21);
+ OFFSET(SW_R22, switch_stack, r22);
+ OFFSET(SW_R23, switch_stack, r23);
+ OFFSET(SW_FP, switch_stack, fp);
+ OFFSET(SW_GP, switch_stack, gp);
+ OFFSET(SW_RA, switch_stack, ra);
+ DEFINE(SWITCH_STACK_SIZE, sizeof(struct switch_stack));
+ BLANK();
+
+ /* struct thread_info */
+ OFFSET(TI_FLAGS, thread_info, flags);
+ OFFSET(TI_PREEMPT_COUNT, thread_info, preempt_count);
+ BLANK();
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (C) 2013 Altera Corporation
+ * Copyright (C) 2011 Tobias Klauser <tklauser@distanz.ch>
+ *
+ * Based on cpuinfo.c from microblaze
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/seq_file.h>
+#include <linux/string.h>
+#include <linux/of.h>
+#include <asm/cpuinfo.h>
+
+struct cpuinfo cpuinfo;
+
+#define err_cpu(x) \
+ pr_err("ERROR: Nios II " x " different for kernel and DTS\n")
+
+static inline u32 fcpu(struct device_node *cpu, const char *n)
+{
+ u32 val = 0;
+
+ of_property_read_u32(cpu, n, &val);
+
+ return val;
+}
+
+static inline u32 fcpu_has(struct device_node *cpu, const char *n)
+{
+ return of_get_property(cpu, n, NULL) ? 1 : 0;
+}
+
+void __init setup_cpuinfo(void)
+{
+ struct device_node *cpu;
+ const char *str;
+ int len;
+
+ cpu = of_find_node_by_type(NULL, "cpu");
+ if (!cpu)
+ panic("%s: No CPU found in devicetree!\n", __func__);
+
+ if (!fcpu_has(cpu, "altr,has-initda"))
+ panic("initda instruction is unimplemented. Please update your "
+ "hardware system to have more than 4-byte line data "
+ "cache\n");
+
+ cpuinfo.cpu_clock_freq = fcpu(cpu, "clock-frequency");
+
+ str = of_get_property(cpu, "altr,implementation", &len);
+ if (str)
+ strlcpy(cpuinfo.cpu_impl, str, sizeof(cpuinfo.cpu_impl));
+ else
+ strcpy(cpuinfo.cpu_impl, "<unknown>");
+
+ cpuinfo.has_div = fcpu_has(cpu, "altr,has-div");
+ cpuinfo.has_mul = fcpu_has(cpu, "altr,has-mul");
+ cpuinfo.has_mulx = fcpu_has(cpu, "altr,has-mulx");
+
+ if (IS_ENABLED(CONFIG_NIOS2_HW_DIV_SUPPORT) && !cpuinfo.has_div)
+ err_cpu("DIV");
+
+ if (IS_ENABLED(CONFIG_NIOS2_HW_MUL_SUPPORT) && !cpuinfo.has_mul)
+ err_cpu("MUL");
+
+ if (IS_ENABLED(CONFIG_NIOS2_HW_MULX_SUPPORT) && !cpuinfo.has_mulx)
+ err_cpu("MULX");
+
+ cpuinfo.tlb_num_ways = fcpu(cpu, "altr,tlb-num-ways");
+ if (!cpuinfo.tlb_num_ways)
+ panic("altr,tlb-num-ways can't be 0. Please check your hardware "
+ "system\n");
+ cpuinfo.icache_line_size = fcpu(cpu, "icache-line-size");
+ cpuinfo.icache_size = fcpu(cpu, "icache-size");
+ if (CONFIG_NIOS2_ICACHE_SIZE != cpuinfo.icache_size)
+ pr_warn("Warning: icache size configuration mismatch "
+ "(0x%x vs 0x%x) of CONFIG_NIOS2_ICACHE_SIZE vs "
+ "device tree icache-size\n",
+ CONFIG_NIOS2_ICACHE_SIZE, cpuinfo.icache_size);
+
+ cpuinfo.dcache_line_size = fcpu(cpu, "dcache-line-size");
+ if (CONFIG_NIOS2_DCACHE_LINE_SIZE != cpuinfo.dcache_line_size)
+ pr_warn("Warning: dcache line size configuration mismatch "
+ "(0x%x vs 0x%x) of CONFIG_NIOS2_DCACHE_LINE_SIZE vs "
+ "device tree dcache-line-size\n",
+ CONFIG_NIOS2_DCACHE_LINE_SIZE, cpuinfo.dcache_line_size);
+ cpuinfo.dcache_size = fcpu(cpu, "dcache-size");
+ if (CONFIG_NIOS2_DCACHE_SIZE != cpuinfo.dcache_size)
+ pr_warn("Warning: dcache size configuration mismatch "
+ "(0x%x vs 0x%x) of CONFIG_NIOS2_DCACHE_SIZE vs "
+ "device tree dcache-size\n",
+ CONFIG_NIOS2_DCACHE_SIZE, cpuinfo.dcache_size);
+
+ cpuinfo.tlb_pid_num_bits = fcpu(cpu, "altr,pid-num-bits");
+ cpuinfo.tlb_num_ways_log2 = ilog2(cpuinfo.tlb_num_ways);
+ cpuinfo.tlb_num_entries = fcpu(cpu, "altr,tlb-num-entries");
+ cpuinfo.tlb_num_lines = cpuinfo.tlb_num_entries / cpuinfo.tlb_num_ways;
+ cpuinfo.tlb_ptr_sz = fcpu(cpu, "altr,tlb-ptr-sz");
+
+ cpuinfo.reset_addr = fcpu(cpu, "altr,reset-addr");
+ cpuinfo.exception_addr = fcpu(cpu, "altr,exception-addr");
+ cpuinfo.fast_tlb_miss_exc_addr = fcpu(cpu, "altr,fast-tlb-miss-addr");
+}
+
+#ifdef CONFIG_PROC_FS
+
+/*
+ * Get CPU information for use by the procfs.
+ */
+static int show_cpuinfo(struct seq_file *m, void *v)
+{
+ int count = 0;
+ const u32 clockfreq = cpuinfo.cpu_clock_freq;
+
+ count = seq_printf(m,
+ "CPU:\t\tNios II/%s\n"
+ "MMU:\t\t%s\n"
+ "FPU:\t\tnone\n"
+ "Clocking:\t%u.%02u MHz\n"
+ "BogoMips:\t%lu.%02lu\n"
+ "Calibration:\t%lu loops\n",
+ cpuinfo.cpu_impl,
+ cpuinfo.mmu ? "present" : "none",
+ clockfreq / 1000000, (clockfreq / 100000) % 10,
+ (loops_per_jiffy * HZ) / 500000,
+ ((loops_per_jiffy * HZ) / 5000) % 100,
+ (loops_per_jiffy * HZ));
+
+ count += seq_printf(m,
+ "HW:\n"
+ " MUL:\t\t%s\n"
+ " MULX:\t\t%s\n"
+ " DIV:\t\t%s\n",
+ cpuinfo.has_mul ? "yes" : "no",
+ cpuinfo.has_mulx ? "yes" : "no",
+ cpuinfo.has_div ? "yes" : "no");
+
+ count += seq_printf(m,
+ "Icache:\t\t%ukB, line length: %u\n",
+ cpuinfo.icache_size >> 10,
+ cpuinfo.icache_line_size);
+
+ count += seq_printf(m,
+ "Dcache:\t\t%ukB, line length: %u\n",
+ cpuinfo.dcache_size >> 10,
+ cpuinfo.dcache_line_size);
+
+ count += seq_printf(m,
+ "TLB:\t\t%u ways, %u entries, %u PID bits\n",
+ cpuinfo.tlb_num_ways,
+ cpuinfo.tlb_num_entries,
+ cpuinfo.tlb_pid_num_bits);
+
+ return 0;
+}
+
+static void *cpuinfo_start(struct seq_file *m, loff_t *pos)
+{
+ unsigned long i = *pos;
+
+ return i < num_possible_cpus() ? (void *) (i + 1) : NULL;
+}
+
+static void *cpuinfo_next(struct seq_file *m, void *v, loff_t *pos)
+{
+ ++*pos;
+ return cpuinfo_start(m, pos);
+}
+
+static void cpuinfo_stop(struct seq_file *m, void *v)
+{
+}
+
+const struct seq_operations cpuinfo_op = {
+ .start = cpuinfo_start,
+ .next = cpuinfo_next,
+ .stop = cpuinfo_stop,
+ .show = show_cpuinfo
+};
+
+#endif /* CONFIG_PROC_FS */
--- /dev/null
+/*
+ * linux/arch/nios2/kernel/entry.S
+ *
+ * Copyright (C) 2013-2014 Altera Corporation
+ * Copyright (C) 2009, Wind River Systems Inc
+ *
+ * Implemented by fredrik.markstrom@gmail.com and ivarholmqvist@gmail.com
+ *
+ * Copyright (C) 1999-2002, Greg Ungerer (gerg@snapgear.com)
+ * Copyright (C) 1998 D. Jeff Dionne <jeff@lineo.ca>,
+ * Kenneth Albanowski <kjahds@kjahds.com>,
+ * Copyright (C) 2000 Lineo Inc. (www.lineo.com)
+ * Copyright (C) 2004 Microtronix Datacom Ltd.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Linux/m68k support by Hamish Macdonald
+ *
+ * 68060 fixes by Jesper Skov
+ * ColdFire support by Greg Ungerer (gerg@snapgear.com)
+ * 5307 fixes by David W. Miller
+ * linux 2.4 support David McCullough <davidm@snapgear.com>
+ */
+
+#include <linux/sys.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/asm-macros.h>
+#include <asm/thread_info.h>
+#include <asm/errno.h>
+#include <asm/setup.h>
+#include <asm/entry.h>
+#include <asm/unistd.h>
+#include <asm/processor.h>
+
+.macro GET_THREAD_INFO reg
+.if THREAD_SIZE & 0xffff0000
+ andhi \reg, sp, %hi(~(THREAD_SIZE-1))
+.else
+ addi \reg, r0, %lo(~(THREAD_SIZE-1))
+ and \reg, \reg, sp
+.endif
+.endm
+
+.macro kuser_cmpxchg_check
+ /*
+ * Make sure our user space atomic helper is restarted if it was
+ * interrupted in a critical region.
+ * ea-4 = address of interrupted insn (ea must be preserved).
+ * sp = saved regs.
+ * cmpxchg_ldw = first critical insn, cmpxchg_stw = last critical insn.
+ * If ea <= cmpxchg_stw and ea > cmpxchg_ldw then saved EA is set to
+ * cmpxchg_ldw + 4.
+ */
+ /* et = cmpxchg_stw + 4 */
+ movui et, (KUSER_BASE + 4 + (cmpxchg_stw - __kuser_helper_start))
+ bgtu ea, et, 1f
+
+ subi et, et, (cmpxchg_stw - cmpxchg_ldw) /* et = cmpxchg_ldw + 4 */
+ bltu ea, et, 1f
+ stw et, PT_EA(sp) /* fix up EA */
+ mov ea, et
+1:
+.endm
+
+.section .rodata
+.align 4
+exception_table:
+ .word unhandled_exception /* 0 - Reset */
+ .word unhandled_exception /* 1 - Processor-only Reset */
+ .word external_interrupt /* 2 - Interrupt */
+ .word handle_trap /* 3 - Trap Instruction */
+
+ .word instruction_trap /* 4 - Unimplemented instruction */
+ .word handle_illegal /* 5 - Illegal instruction */
+ .word handle_unaligned /* 6 - Misaligned data access */
+ .word handle_unaligned /* 7 - Misaligned destination address */
+
+ .word handle_diverror /* 8 - Division error */
+ .word protection_exception_ba /* 9 - Supervisor-only instr. address */
+ .word protection_exception_instr /* 10 - Supervisor only instruction */
+ .word protection_exception_ba /* 11 - Supervisor only data address */
+
+ .word unhandled_exception /* 12 - Double TLB miss (data) */
+ .word protection_exception_pte /* 13 - TLB permission violation (x) */
+ .word protection_exception_pte /* 14 - TLB permission violation (r) */
+ .word protection_exception_pte /* 15 - TLB permission violation (w) */
+
+ .word unhandled_exception /* 16 - MPU region violation */
+
+trap_table:
+ .word handle_system_call /* 0 */
+ .word instruction_trap /* 1 */
+ .word instruction_trap /* 2 */
+ .word instruction_trap /* 3 */
+ .word instruction_trap /* 4 */
+ .word instruction_trap /* 5 */
+ .word instruction_trap /* 6 */
+ .word instruction_trap /* 7 */
+ .word instruction_trap /* 8 */
+ .word instruction_trap /* 9 */
+ .word instruction_trap /* 10 */
+ .word instruction_trap /* 11 */
+ .word instruction_trap /* 12 */
+ .word instruction_trap /* 13 */
+ .word instruction_trap /* 14 */
+ .word instruction_trap /* 15 */
+ .word instruction_trap /* 16 */
+ .word instruction_trap /* 17 */
+ .word instruction_trap /* 18 */
+ .word instruction_trap /* 19 */
+ .word instruction_trap /* 20 */
+ .word instruction_trap /* 21 */
+ .word instruction_trap /* 22 */
+ .word instruction_trap /* 23 */
+ .word instruction_trap /* 24 */
+ .word instruction_trap /* 25 */
+ .word instruction_trap /* 26 */
+ .word instruction_trap /* 27 */
+ .word instruction_trap /* 28 */
+ .word instruction_trap /* 29 */
+ .word instruction_trap /* 30 */
+ .word handle_breakpoint /* 31 */
+
+.text
+.set noat
+.set nobreak
+
+ENTRY(inthandler)
+ SAVE_ALL
+
+ kuser_cmpxchg_check
+
+ /* Clear EH bit before we get a new excpetion in the kernel
+ * and after we have saved it to the exception frame. This is done
+ * whether it's trap, tlb-miss or interrupt. If we don't do this
+ * estatus is not updated the next exception.
+ */
+ rdctl r24, status
+ movi r9, %lo(~STATUS_EH)
+ and r24, r24, r9
+ wrctl status, r24
+
+ /* Read cause and vector and branch to the associated handler */
+ mov r4, sp
+ rdctl r5, exception
+ movia r9, exception_table
+ add r24, r9, r5
+ ldw r24, 0(r24)
+ jmp r24
+
+
+/***********************************************************************
+ * Handle traps
+ ***********************************************************************
+ */
+ENTRY(handle_trap)
+ ldw r24, -4(ea) /* instruction that caused the exception */
+ srli r24, r24, 4
+ andi r24, r24, 0x7c
+ movia r9,trap_table
+ add r24, r24, r9
+ ldw r24, 0(r24)
+ jmp r24
+
+
+/***********************************************************************
+ * Handle system calls
+ ***********************************************************************
+ */
+ENTRY(handle_system_call)
+ /* Enable interrupts */
+ rdctl r10, status
+ ori r10, r10, STATUS_PIE
+ wrctl status, r10
+
+ /* Reload registers destroyed by common code. */
+ ldw r4, PT_R4(sp)
+ ldw r5, PT_R5(sp)
+
+local_restart:
+ /* Check that the requested system call is within limits */
+ movui r1, __NR_syscalls
+ bgeu r2, r1, ret_invsyscall
+ slli r1, r2, 2
+ movhi r11, %hiadj(sys_call_table)
+ add r1, r1, r11
+ ldw r1, %lo(sys_call_table)(r1)
+ beq r1, r0, ret_invsyscall
+
+ /* Check if we are being traced */
+ GET_THREAD_INFO r11
+ ldw r11,TI_FLAGS(r11)
+ BTBNZ r11,r11,TIF_SYSCALL_TRACE,traced_system_call
+
+ /* Execute the system call */
+ callr r1
+
+ /* If the syscall returns a negative result:
+ * Set r7 to 1 to indicate error,
+ * Negate r2 to get a positive error code
+ * If the syscall returns zero or a positive value:
+ * Set r7 to 0.
+ * The sigreturn system calls will skip the code below by
+ * adding to register ra. To avoid destroying registers
+ */
+translate_rc_and_ret:
+ movi r1, 0
+ bge r2, zero, 3f
+ sub r2, zero, r2
+ movi r1, 1
+3:
+ stw r2, PT_R2(sp)
+ stw r1, PT_R7(sp)
+end_translate_rc_and_ret:
+
+ret_from_exception:
+ ldw r1, PT_ESTATUS(sp)
+ /* if so, skip resched, signals */
+ TSTBNZ r1, r1, ESTATUS_EU, Luser_return
+
+restore_all:
+ rdctl r10, status /* disable intrs */
+ andi r10, r10, %lo(~STATUS_PIE)
+ wrctl status, r10
+ RESTORE_ALL
+ eret
+
+ /* If the syscall number was invalid return ENOSYS */
+ret_invsyscall:
+ movi r2, -ENOSYS
+ br translate_rc_and_ret
+
+ /* This implements the same as above, except it calls
+ * do_syscall_trace_enter and do_syscall_trace_exit before and after the
+ * syscall in order for utilities like strace and gdb to work.
+ */
+traced_system_call:
+ SAVE_SWITCH_STACK
+ call do_syscall_trace_enter
+ RESTORE_SWITCH_STACK
+
+ /* Create system call register arguments. The 5th and 6th
+ arguments on stack are already in place at the beginning
+ of pt_regs. */
+ ldw r2, PT_R2(sp)
+ ldw r4, PT_R4(sp)
+ ldw r5, PT_R5(sp)
+ ldw r6, PT_R6(sp)
+ ldw r7, PT_R7(sp)
+
+ /* Fetch the syscall function, we don't need to check the boundaries
+ * since this is already done.
+ */
+ slli r1, r2, 2
+ movhi r11,%hiadj(sys_call_table)
+ add r1, r1, r11
+ ldw r1, %lo(sys_call_table)(r1)
+
+ callr r1
+
+ /* If the syscall returns a negative result:
+ * Set r7 to 1 to indicate error,
+ * Negate r2 to get a positive error code
+ * If the syscall returns zero or a positive value:
+ * Set r7 to 0.
+ * The sigreturn system calls will skip the code below by
+ * adding to register ra. To avoid destroying registers
+ */
+translate_rc_and_ret2:
+ movi r1, 0
+ bge r2, zero, 4f
+ sub r2, zero, r2
+ movi r1, 1
+4:
+ stw r2, PT_R2(sp)
+ stw r1, PT_R7(sp)
+end_translate_rc_and_ret2:
+ SAVE_SWITCH_STACK
+ call do_syscall_trace_exit
+ RESTORE_SWITCH_STACK
+ br ret_from_exception
+
+Luser_return:
+ GET_THREAD_INFO r11 /* get thread_info pointer */
+ ldw r10, TI_FLAGS(r11) /* get thread_info->flags */
+ ANDI32 r11, r10, _TIF_WORK_MASK
+ beq r11, r0, restore_all /* Nothing to do */
+ BTBZ r1, r10, TIF_NEED_RESCHED, Lsignal_return
+
+ /* Reschedule work */
+ call schedule
+ br ret_from_exception
+
+Lsignal_return:
+ ANDI32 r1, r10, _TIF_SIGPENDING | _TIF_NOTIFY_RESUME
+ beq r1, r0, restore_all
+ mov r4, sp /* pt_regs */
+ SAVE_SWITCH_STACK
+ call do_notify_resume
+ beq r2, r0, no_work_pending
+ RESTORE_SWITCH_STACK
+ /* prepare restart syscall here without leaving kernel */
+ ldw r2, PT_R2(sp) /* reload syscall number in r2 */
+ ldw r4, PT_R4(sp) /* reload syscall arguments r4-r9 */
+ ldw r5, PT_R5(sp)
+ ldw r6, PT_R6(sp)
+ ldw r7, PT_R7(sp)
+ ldw r8, PT_R8(sp)
+ ldw r9, PT_R9(sp)
+ br local_restart /* restart syscall */
+
+no_work_pending:
+ RESTORE_SWITCH_STACK
+ br ret_from_exception
+
+/***********************************************************************
+ * Handle external interrupts.
+ ***********************************************************************
+ */
+/*
+ * This is the generic interrupt handler (for all hardware interrupt
+ * sources). It figures out the vector number and calls the appropriate
+ * interrupt service routine directly.
+ */
+external_interrupt:
+ rdctl r12, ipending
+ rdctl r9, ienable
+ and r12, r12, r9
+ /* skip if no interrupt is pending */
+ beq r12, r0, ret_from_interrupt
+
+ movi r24, -1
+ stw r24, PT_ORIG_R2(sp)
+
+ /*
+ * Process an external hardware interrupt.
+ */
+
+ addi ea, ea, -4 /* re-issue the interrupted instruction */
+ stw ea, PT_EA(sp)
+2: movi r4, %lo(-1) /* Start from bit position 0,
+ highest priority */
+ /* This is the IRQ # for handler call */
+1: andi r10, r12, 1 /* Isolate bit we are interested in */
+ srli r12, r12, 1 /* shift count is costly without hardware
+ multiplier */
+ addi r4, r4, 1
+ beq r10, r0, 1b
+ mov r5, sp /* Setup pt_regs pointer for handler call */
+ call do_IRQ
+ rdctl r12, ipending /* check again if irq still pending */
+ rdctl r9, ienable /* Isolate possible interrupts */
+ and r12, r12, r9
+ bne r12, r0, 2b
+ /* br ret_from_interrupt */ /* fall through to ret_from_interrupt */
+
+ENTRY(ret_from_interrupt)
+ ldw r1, PT_ESTATUS(sp) /* check if returning to kernel */
+ TSTBNZ r1, r1, ESTATUS_EU, Luser_return
+
+#ifdef CONFIG_PREEMPT
+ GET_THREAD_INFO r1
+ ldw r4, TI_PREEMPT_COUNT(r1)
+ bne r4, r0, restore_all
+
+need_resched:
+ ldw r4, TI_FLAGS(r1) /* ? Need resched set */
+ BTBZ r10, r4, TIF_NEED_RESCHED, restore_all
+ ldw r4, PT_ESTATUS(sp) /* ? Interrupts off */
+ andi r10, r4, ESTATUS_EPIE
+ beq r10, r0, restore_all
+ movia r4, PREEMPT_ACTIVE
+ stw r4, TI_PREEMPT_COUNT(r1)
+ rdctl r10, status /* enable intrs again */
+ ori r10, r10 ,STATUS_PIE
+ wrctl status, r10
+ PUSH r1
+ call schedule
+ POP r1
+ mov r4, r0
+ stw r4, TI_PREEMPT_COUNT(r1)
+ rdctl r10, status /* disable intrs */
+ andi r10, r10, %lo(~STATUS_PIE)
+ wrctl status, r10
+ br need_resched
+#else
+ br restore_all
+#endif
+
+/***********************************************************************
+ * A few syscall wrappers
+ ***********************************************************************
+ */
+/*
+ * int clone(unsigned long clone_flags, unsigned long newsp,
+ * int __user * parent_tidptr, int __user * child_tidptr,
+ * int tls_val)
+ */
+ENTRY(sys_clone)
+ SAVE_SWITCH_STACK
+ addi sp, sp, -4
+ stw r7, 0(sp) /* Pass 5th arg thru stack */
+ mov r7, r6 /* 4th arg is 3rd of clone() */
+ mov r6, zero /* 3rd arg always 0 */
+ call do_fork
+ addi sp, sp, 4
+ RESTORE_SWITCH_STACK
+ ret
+
+ENTRY(sys_rt_sigreturn)
+ SAVE_SWITCH_STACK
+ mov r4, sp
+ call do_rt_sigreturn
+ RESTORE_SWITCH_STACK
+ addi ra, ra, (end_translate_rc_and_ret - translate_rc_and_ret)
+ ret
+
+/***********************************************************************
+ * A few other wrappers and stubs
+ ***********************************************************************
+ */
+protection_exception_pte:
+ rdctl r6, pteaddr
+ slli r6, r6, 10
+ call do_page_fault
+ br ret_from_exception
+
+protection_exception_ba:
+ rdctl r6, badaddr
+ call do_page_fault
+ br ret_from_exception
+
+protection_exception_instr:
+ call handle_supervisor_instr
+ br ret_from_exception
+
+handle_breakpoint:
+ call breakpoint_c
+ br ret_from_exception
+
+#ifdef CONFIG_NIOS2_ALIGNMENT_TRAP
+handle_unaligned:
+ SAVE_SWITCH_STACK
+ call handle_unaligned_c
+ RESTORE_SWITCH_STACK
+ br ret_from_exception
+#else
+handle_unaligned:
+ call handle_unaligned_c
+ br ret_from_exception
+#endif
+
+handle_illegal:
+ call handle_illegal_c
+ br ret_from_exception
+
+handle_diverror:
+ call handle_diverror_c
+ br ret_from_exception
+
+/*
+ * Beware - when entering resume, prev (the current task) is
+ * in r4, next (the new task) is in r5, don't change these
+ * registers.
+ */
+ENTRY(resume)
+
+ rdctl r7, status /* save thread status reg */
+ stw r7, TASK_THREAD + THREAD_KPSR(r4)
+
+ andi r7, r7, %lo(~STATUS_PIE) /* disable interrupts */
+ wrctl status, r7
+
+ SAVE_SWITCH_STACK
+ stw sp, TASK_THREAD + THREAD_KSP(r4)/* save kernel stack pointer */
+ ldw sp, TASK_THREAD + THREAD_KSP(r5)/* restore new thread stack */
+ movia r24, _current_thread /* save thread */
+ GET_THREAD_INFO r1
+ stw r1, 0(r24)
+ RESTORE_SWITCH_STACK
+
+ ldw r7, TASK_THREAD + THREAD_KPSR(r5)/* restore thread status reg */
+ wrctl status, r7
+ ret
+
+ENTRY(ret_from_fork)
+ call schedule_tail
+ br ret_from_exception
+
+ENTRY(ret_from_kernel_thread)
+ call schedule_tail
+ mov r4,r17 /* arg */
+ callr r16 /* function */
+ br ret_from_exception
+
+/*
+ * Kernel user helpers.
+ *
+ * Each segment is 64-byte aligned and will be mapped to the <User space>.
+ * New segments (if ever needed) must be added after the existing ones.
+ * This mechanism should be used only for things that are really small and
+ * justified, and not be abused freely.
+ *
+ */
+
+ /* Filling pads with undefined instructions. */
+.macro kuser_pad sym size
+ .if ((. - \sym) & 3)
+ .rept (4 - (. - \sym) & 3)
+ .byte 0
+ .endr
+ .endif
+ .rept ((\size - (. - \sym)) / 4)
+ .word 0xdeadbeef
+ .endr
+.endm
+
+ .align 6
+ .globl __kuser_helper_start
+__kuser_helper_start:
+
+__kuser_helper_version: /* @ 0x1000 */
+ .word ((__kuser_helper_end - __kuser_helper_start) >> 6)
+
+__kuser_cmpxchg: /* @ 0x1004 */
+ /*
+ * r4 pointer to exchange variable
+ * r5 old value
+ * r6 new value
+ */
+cmpxchg_ldw:
+ ldw r2, 0(r4) /* load current value */
+ sub r2, r2, r5 /* compare with old value */
+ bne r2, zero, cmpxchg_ret
+
+ /* We had a match, store the new value */
+cmpxchg_stw:
+ stw r6, 0(r4)
+cmpxchg_ret:
+ ret
+
+ kuser_pad __kuser_cmpxchg, 64
+
+ .globl __kuser_sigtramp
+__kuser_sigtramp:
+ movi r2, __NR_rt_sigreturn
+ trap
+
+ kuser_pad __kuser_sigtramp, 64
+
+ .globl __kuser_helper_end
+__kuser_helper_end:
--- /dev/null
+/*
+ * Copyright (C) 2009 Wind River Systems Inc
+ * Implemented by fredrik.markstrom@gmail.com and ivarholmqvist@gmail.com
+ * Copyright (C) 2004 Microtronix Datacom Ltd
+ * Copyright (C) 2001 Vic Phillips, Microtronix Datacom Ltd.
+ *
+ * Based on head.S for Altera's Excalibur development board with nios processor
+ *
+ * Based on the following from the Excalibur sdk distribution:
+ * NA_MemoryMap.s, NR_JumpToStart.s, NR_Setup.s, NR_CWPManager.s
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/linkage.h>
+#include <asm/thread_info.h>
+#include <asm/processor.h>
+#include <asm/cache.h>
+#include <asm/page.h>
+#include <asm/asm-offsets.h>
+#include <asm/asm-macros.h>
+
+/*
+ * ZERO_PAGE is a special page that is used for zero-initialized
+ * data and COW.
+ */
+.data
+.global empty_zero_page
+.align 12
+empty_zero_page:
+ .space PAGE_SIZE
+
+/*
+ * This global variable is used as an extension to the nios'
+ * STATUS register to emulate a user/supervisor mode.
+ */
+ .data
+ .align 2
+ .set noat
+
+ .global _current_thread
+_current_thread:
+ .long 0
+/*
+ * Input(s): passed from u-boot
+ * r4 - Optional pointer to a board information structure.
+ * r5 - Optional pointer to the physical starting address of the init RAM
+ * disk.
+ * r6 - Optional pointer to the physical ending address of the init RAM
+ * disk.
+ * r7 - Optional pointer to the physical starting address of any kernel
+ * command-line parameters.
+ */
+
+/*
+ * First executable code - detected and jumped to by the ROM bootstrap
+ * if the code resides in flash (looks for "Nios" at offset 0x0c from
+ * the potential executable image).
+ */
+ __HEAD
+ENTRY(_start)
+ wrctl status, r0 /* Disable interrupts */
+
+ /* Initialize all cache lines within the instruction cache */
+ movia r1, NIOS2_ICACHE_SIZE
+ movui r2, NIOS2_ICACHE_LINE_SIZE
+
+icache_init:
+ initi r1
+ sub r1, r1, r2
+ bgt r1, r0, icache_init
+ br 1f
+
+ /*
+ * This is the default location for the exception handler. Code in jump
+ * to our handler
+ */
+ENTRY(exception_handler_hook)
+ movia r24, inthandler
+ jmp r24
+
+ENTRY(fast_handler)
+ nextpc et
+helper:
+ stw r3, r3save - helper(et)
+
+ rdctl r3 , pteaddr
+ srli r3, r3, 12
+ slli r3, r3, 2
+ movia et, pgd_current
+
+ ldw et, 0(et)
+ add r3, et, r3
+ ldw et, 0(r3)
+
+ rdctl r3, pteaddr
+ andi r3, r3, 0xfff
+ add et, r3, et
+ ldw et, 0(et)
+ wrctl tlbacc, et
+ nextpc et
+helper2:
+ ldw r3, r3save - helper2(et)
+ subi ea, ea, 4
+ eret
+r3save:
+ .word 0x0
+ENTRY(fast_handler_end)
+
+1:
+ /*
+ * After the instruction cache is initialized, the data cache must
+ * also be initialized.
+ */
+ movia r1, NIOS2_DCACHE_SIZE
+ movui r2, NIOS2_DCACHE_LINE_SIZE
+
+dcache_init:
+ initd 0(r1)
+ sub r1, r1, r2
+ bgt r1, r0, dcache_init
+
+ nextpc r1 /* Find out where we are */
+chkadr:
+ movia r2, chkadr
+ beq r1, r2,finish_move /* We are running in RAM done */
+ addi r1, r1,(_start - chkadr) /* Source */
+ movia r2, _start /* Destination */
+ movia r3, __bss_start /* End of copy */
+
+loop_move: /* r1: src, r2: dest, r3: last dest */
+ ldw r8, 0(r1) /* load a word from [r1] */
+ stw r8, 0(r2) /* store a word to dest [r2] */
+ flushd 0(r2) /* Flush cache for safety */
+ addi r1, r1, 4 /* inc the src addr */
+ addi r2, r2, 4 /* inc the dest addr */
+ blt r2, r3, loop_move
+
+ movia r1, finish_move /* VMA(_start)->l1 */
+ jmp r1 /* jmp to _start */
+
+finish_move:
+
+ /* Mask off all possible interrupts */
+ wrctl ienable, r0
+
+ /* Clear .bss */
+ movia r2, __bss_start
+ movia r1, __bss_stop
+1:
+ stb r0, 0(r2)
+ addi r2, r2, 1
+ bne r1, r2, 1b
+
+ movia r1, init_thread_union /* set stack at top of the task union */
+ addi sp, r1, THREAD_SIZE
+ movia r2, _current_thread /* Remember current thread */
+ stw r1, 0(r2)
+
+ movia r1, nios2_boot_init /* save args r4-r7 passed from u-boot */
+ callr r1
+
+ movia r1, start_kernel /* call start_kernel as a subroutine */
+ callr r1
+
+ /* If we return from start_kernel, break to the oci debugger and
+ * buggered we are.
+ */
+ break
+
+ /* End of startup code */
+.set at
--- /dev/null
+/*
+ * Copyright (C) 2003-2013 Altera Corporation
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+
+#include <linux/linkage.h>
+#include <asm/entry.h>
+
+.set noat
+.set nobreak
+
+/*
+* Explicitly allow the use of r1 (the assembler temporary register)
+* within this code. This register is normally reserved for the use of
+* the compiler.
+*/
+
+ENTRY(instruction_trap)
+ ldw r1, PT_R1(sp) // Restore registers
+ ldw r2, PT_R2(sp)
+ ldw r3, PT_R3(sp)
+ ldw r4, PT_R4(sp)
+ ldw r5, PT_R5(sp)
+ ldw r6, PT_R6(sp)
+ ldw r7, PT_R7(sp)
+ ldw r8, PT_R8(sp)
+ ldw r9, PT_R9(sp)
+ ldw r10, PT_R10(sp)
+ ldw r11, PT_R11(sp)
+ ldw r12, PT_R12(sp)
+ ldw r13, PT_R13(sp)
+ ldw r14, PT_R14(sp)
+ ldw r15, PT_R15(sp)
+ ldw ra, PT_RA(sp)
+ ldw fp, PT_FP(sp)
+ ldw gp, PT_GP(sp)
+ ldw et, PT_ESTATUS(sp)
+ wrctl estatus, et
+ ldw ea, PT_EA(sp)
+ ldw et, PT_SP(sp) /* backup sp in et */
+
+ addi sp, sp, PT_REGS_SIZE
+
+ /* INSTRUCTION EMULATION
+ * ---------------------
+ *
+ * Nios II processors generate exceptions for unimplemented instructions.
+ * The routines below emulate these instructions. Depending on the
+ * processor core, the only instructions that might need to be emulated
+ * are div, divu, mul, muli, mulxss, mulxsu, and mulxuu.
+ *
+ * The emulations match the instructions, except for the following
+ * limitations:
+ *
+ * 1) The emulation routines do not emulate the use of the exception
+ * temporary register (et) as a source operand because the exception
+ * handler already has modified it.
+ *
+ * 2) The routines do not emulate the use of the stack pointer (sp) or
+ * the exception return address register (ea) as a destination because
+ * modifying these registers crashes the exception handler or the
+ * interrupted routine.
+ *
+ * Detailed Design
+ * ---------------
+ *
+ * The emulation routines expect the contents of integer registers r0-r31
+ * to be on the stack at addresses sp, 4(sp), 8(sp), ... 124(sp). The
+ * routines retrieve source operands from the stack and modify the
+ * destination register's value on the stack prior to the end of the
+ * exception handler. Then all registers except the destination register
+ * are restored to their previous values.
+ *
+ * The instruction that causes the exception is found at address -4(ea).
+ * The instruction's OP and OPX fields identify the operation to be
+ * performed.
+ *
+ * One instruction, muli, is an I-type instruction that is identified by
+ * an OP field of 0x24.
+ *
+ * muli AAAAA,BBBBB,IIIIIIIIIIIIIIII,-0x24-
+ * 27 22 6 0 <-- LSB of field
+ *
+ * The remaining emulated instructions are R-type and have an OP field
+ * of 0x3a. Their OPX fields identify them.
+ *
+ * R-type AAAAA,BBBBB,CCCCC,XXXXXX,NNNNN,-0x3a-
+ * 27 22 17 11 6 0 <-- LSB of field
+ *
+ *
+ * Opcode Encoding. muli is identified by its OP value. Then OPX & 0x02
+ * is used to differentiate between the division opcodes and the
+ * remaining multiplication opcodes.
+ *
+ * Instruction OP OPX OPX & 0x02
+ * ----------- ---- ---- ----------
+ * muli 0x24
+ * divu 0x3a 0x24 0
+ * div 0x3a 0x25 0
+ * mul 0x3a 0x27 != 0
+ * mulxuu 0x3a 0x07 != 0
+ * mulxsu 0x3a 0x17 != 0
+ * mulxss 0x3a 0x1f != 0
+ */
+
+
+ /*
+ * Save everything on the stack to make it easy for the emulation
+ * routines to retrieve the source register operands.
+ */
+
+ addi sp, sp, -128
+ stw zero, 0(sp) /* Save zero on stack to avoid special case for r0. */
+ stw r1, 4(sp)
+ stw r2, 8(sp)
+ stw r3, 12(sp)
+ stw r4, 16(sp)
+ stw r5, 20(sp)
+ stw r6, 24(sp)
+ stw r7, 28(sp)
+ stw r8, 32(sp)
+ stw r9, 36(sp)
+ stw r10, 40(sp)
+ stw r11, 44(sp)
+ stw r12, 48(sp)
+ stw r13, 52(sp)
+ stw r14, 56(sp)
+ stw r15, 60(sp)
+ stw r16, 64(sp)
+ stw r17, 68(sp)
+ stw r18, 72(sp)
+ stw r19, 76(sp)
+ stw r20, 80(sp)
+ stw r21, 84(sp)
+ stw r22, 88(sp)
+ stw r23, 92(sp)
+ /* Don't bother to save et. It's already been changed. */
+ rdctl r5, estatus
+ stw r5, 100(sp)
+
+ stw gp, 104(sp)
+ stw et, 108(sp) /* et contains previous sp value. */
+ stw fp, 112(sp)
+ stw ea, 116(sp)
+ stw ra, 120(sp)
+
+
+ /*
+ * Split the instruction into its fields. We need 4*A, 4*B, and 4*C as
+ * offsets to the stack pointer for access to the stored register values.
+ */
+ ldw r2,-4(ea) /* r2 = AAAAA,BBBBB,IIIIIIIIIIIIIIII,PPPPPP */
+ roli r3, r2, 7 /* r3 = BBB,IIIIIIIIIIIIIIII,PPPPPP,AAAAA,BB */
+ roli r4, r3, 3 /* r4 = IIIIIIIIIIIIIIII,PPPPPP,AAAAA,BBBBB */
+ roli r5, r4, 2 /* r5 = IIIIIIIIIIIIII,PPPPPP,AAAAA,BBBBB,II */
+ srai r4, r4, 16 /* r4 = (sign-extended) IMM16 */
+ roli r6, r5, 5 /* r6 = XXXX,NNNNN,PPPPPP,AAAAA,BBBBB,CCCCC,XX */
+ andi r2, r2, 0x3f /* r2 = 00000000000000000000000000,PPPPPP */
+ andi r3, r3, 0x7c /* r3 = 0000000000000000000000000,AAAAA,00 */
+ andi r5, r5, 0x7c /* r5 = 0000000000000000000000000,BBBBB,00 */
+ andi r6, r6, 0x7c /* r6 = 0000000000000000000000000,CCCCC,00 */
+
+ /* Now
+ * r2 = OP
+ * r3 = 4*A
+ * r4 = IMM16 (sign extended)
+ * r5 = 4*B
+ * r6 = 4*C
+ */
+
+ /*
+ * Get the operands.
+ *
+ * It is necessary to check for muli because it uses an I-type
+ * instruction format, while the other instructions are have an R-type
+ * format.
+ *
+ * Prepare for either multiplication or division loop.
+ * They both loop 32 times.
+ */
+ movi r14, 32
+
+ add r3, r3, sp /* r3 = address of A-operand. */
+ ldw r3, 0(r3) /* r3 = A-operand. */
+ movi r7, 0x24 /* muli opcode (I-type instruction format) */
+ beq r2, r7, mul_immed /* muli doesn't use the B register as a source */
+
+ add r5, r5, sp /* r5 = address of B-operand. */
+ ldw r5, 0(r5) /* r5 = B-operand. */
+ /* r4 = SSSSSSSSSSSSSSSS,-----IMM16------ */
+ /* IMM16 not needed, align OPX portion */
+ /* r4 = SSSSSSSSSSSSSSSS,CCCCC,-OPX--,00000 */
+ srli r4, r4, 5 /* r4 = 00000,SSSSSSSSSSSSSSSS,CCCCC,-OPX-- */
+ andi r4, r4, 0x3f /* r4 = 00000000000000000000000000,-OPX-- */
+
+ /* Now
+ * r2 = OP
+ * r3 = src1
+ * r5 = src2
+ * r4 = OPX (no longer can be muli)
+ * r6 = 4*C
+ */
+
+
+ /*
+ * Multiply or Divide?
+ */
+ andi r7, r4, 0x02 /* For R-type multiply instructions,
+ OPX & 0x02 != 0 */
+ bne r7, zero, multiply
+
+
+ /* DIVISION
+ *
+ * Divide an unsigned dividend by an unsigned divisor using
+ * a shift-and-subtract algorithm. The example below shows
+ * 43 div 7 = 6 for 8-bit integers. This classic algorithm uses a
+ * single register to store both the dividend and the quotient,
+ * allowing both values to be shifted with a single instruction.
+ *
+ * remainder dividend:quotient
+ * --------- -----------------
+ * initialize 00000000 00101011:
+ * shift 00000000 0101011:_
+ * remainder >= divisor? no 00000000 0101011:0
+ * shift 00000000 101011:0_
+ * remainder >= divisor? no 00000000 101011:00
+ * shift 00000001 01011:00_
+ * remainder >= divisor? no 00000001 01011:000
+ * shift 00000010 1011:000_
+ * remainder >= divisor? no 00000010 1011:0000
+ * shift 00000101 011:0000_
+ * remainder >= divisor? no 00000101 011:00000
+ * shift 00001010 11:00000_
+ * remainder >= divisor? yes 00001010 11:000001
+ * remainder -= divisor - 00000111
+ * ----------
+ * 00000011 11:000001
+ * shift 00000111 1:000001_
+ * remainder >= divisor? yes 00000111 1:0000011
+ * remainder -= divisor - 00000111
+ * ----------
+ * 00000000 1:0000011
+ * shift 00000001 :0000011_
+ * remainder >= divisor? no 00000001 :00000110
+ *
+ * The quotient is 00000110.
+ */
+
+divide:
+ /*
+ * Prepare for division by assuming the result
+ * is unsigned, and storing its "sign" as 0.
+ */
+ movi r17, 0
+
+
+ /* Which division opcode? */
+ xori r7, r4, 0x25 /* OPX of div */
+ bne r7, zero, unsigned_division
+
+
+ /*
+ * OPX is div. Determine and store the sign of the quotient.
+ * Then take the absolute value of both operands.
+ */
+ xor r17, r3, r5 /* MSB contains sign of quotient */
+ bge r3,zero,dividend_is_nonnegative
+ sub r3, zero, r3 /* -r3 */
+dividend_is_nonnegative:
+ bge r5, zero, divisor_is_nonnegative
+ sub r5, zero, r5 /* -r5 */
+divisor_is_nonnegative:
+
+
+unsigned_division:
+ /* Initialize the unsigned-division loop. */
+ movi r13, 0 /* remainder = 0 */
+
+ /* Now
+ * r3 = dividend : quotient
+ * r4 = 0x25 for div, 0x24 for divu
+ * r5 = divisor
+ * r13 = remainder
+ * r14 = loop counter (already initialized to 32)
+ * r17 = MSB contains sign of quotient
+ */
+
+
+ /*
+ * for (count = 32; count > 0; --count)
+ * {
+ */
+divide_loop:
+
+ /*
+ * Division:
+ *
+ * (remainder:dividend:quotient) <<= 1;
+ */
+ slli r13, r13, 1
+ cmplt r7, r3, zero /* r7 = MSB of r3 */
+ or r13, r13, r7
+ slli r3, r3, 1
+
+
+ /*
+ * if (remainder >= divisor)
+ * {
+ * set LSB of quotient
+ * remainder -= divisor;
+ * }
+ */
+ bltu r13, r5, div_skip
+ ori r3, r3, 1
+ sub r13, r13, r5
+div_skip:
+
+ /*
+ * }
+ */
+ subi r14, r14, 1
+ bne r14, zero, divide_loop
+
+
+ /* Now
+ * r3 = quotient
+ * r4 = 0x25 for div, 0x24 for divu
+ * r6 = 4*C
+ * r17 = MSB contains sign of quotient
+ */
+
+
+ /*
+ * Conditionally negate signed quotient. If quotient is unsigned,
+ * the sign already is initialized to 0.
+ */
+ bge r17, zero, quotient_is_nonnegative
+ sub r3, zero, r3 /* -r3 */
+ quotient_is_nonnegative:
+
+
+ /*
+ * Final quotient is in r3.
+ */
+ add r6, r6, sp
+ stw r3, 0(r6) /* write quotient to stack */
+ br restore_registers
+
+
+
+
+ /* MULTIPLICATION
+ *
+ * A "product" is the number that one gets by summing a "multiplicand"
+ * several times. The "multiplier" specifies the number of copies of the
+ * multiplicand that are summed.
+ *
+ * Actual multiplication algorithms don't use repeated addition, however.
+ * Shift-and-add algorithms get the same answer as repeated addition, and
+ * they are faster. To compute the lower half of a product (pppp below)
+ * one shifts the product left before adding in each of the partial
+ * products (a * mmmm) through (d * mmmm).
+ *
+ * To compute the upper half of a product (PPPP below), one adds in the
+ * partial products (d * mmmm) through (a * mmmm), each time following
+ * the add by a right shift of the product.
+ *
+ * mmmm
+ * * abcd
+ * ------
+ * #### = d * mmmm
+ * #### = c * mmmm
+ * #### = b * mmmm
+ * #### = a * mmmm
+ * --------
+ * PPPPpppp
+ *
+ * The example above shows 4 partial products. Computing actual Nios II
+ * products requires 32 partials.
+ *
+ * It is possible to compute the result of mulxsu from the result of
+ * mulxuu because the only difference between the results of these two
+ * opcodes is the value of the partial product associated with the sign
+ * bit of rA.
+ *
+ * mulxsu = mulxuu - (rA < 0) ? rB : 0;
+ *
+ * It is possible to compute the result of mulxss from the result of
+ * mulxsu because the only difference between the results of these two
+ * opcodes is the value of the partial product associated with the sign
+ * bit of rB.
+ *
+ * mulxss = mulxsu - (rB < 0) ? rA : 0;
+ *
+ */
+
+mul_immed:
+ /* Opcode is muli. Change it into mul for remainder of algorithm. */
+ mov r6, r5 /* Field B is dest register, not field C. */
+ mov r5, r4 /* Field IMM16 is src2, not field B. */
+ movi r4, 0x27 /* OPX of mul is 0x27 */
+
+multiply:
+ /* Initialize the multiplication loop. */
+ movi r9, 0 /* mul_product = 0 */
+ movi r10, 0 /* mulxuu_product = 0 */
+ mov r11, r5 /* save original multiplier for mulxsu and mulxss */
+ mov r12, r5 /* mulxuu_multiplier (will be shifted) */
+ movi r16, 1 /* used to create "rori B,A,1" from "ror B,A,r16" */
+
+ /* Now
+ * r3 = multiplicand
+ * r5 = mul_multiplier
+ * r6 = 4 * dest_register (used later as offset to sp)
+ * r7 = temp
+ * r9 = mul_product
+ * r10 = mulxuu_product
+ * r11 = original multiplier
+ * r12 = mulxuu_multiplier
+ * r14 = loop counter (already initialized)
+ * r16 = 1
+ */
+
+
+ /*
+ * for (count = 32; count > 0; --count)
+ * {
+ */
+multiply_loop:
+
+ /*
+ * mul_product <<= 1;
+ * lsb = multiplier & 1;
+ */
+ slli r9, r9, 1
+ andi r7, r12, 1
+
+ /*
+ * if (lsb == 1)
+ * {
+ * mulxuu_product += multiplicand;
+ * }
+ */
+ beq r7, zero, mulx_skip
+ add r10, r10, r3
+ cmpltu r7, r10, r3 /* Save the carry from the MSB of mulxuu_product. */
+ ror r7, r7, r16 /* r7 = 0x80000000 on carry, or else 0x00000000 */
+mulx_skip:
+
+ /*
+ * if (MSB of mul_multiplier == 1)
+ * {
+ * mul_product += multiplicand;
+ * }
+ */
+ bge r5, zero, mul_skip
+ add r9, r9, r3
+mul_skip:
+
+ /*
+ * mulxuu_product >>= 1; logical shift
+ * mul_multiplier <<= 1; done with MSB
+ * mulx_multiplier >>= 1; done with LSB
+ */
+ srli r10, r10, 1
+ or r10, r10, r7 /* OR in the saved carry bit. */
+ slli r5, r5, 1
+ srli r12, r12, 1
+
+
+ /*
+ * }
+ */
+ subi r14, r14, 1
+ bne r14, zero, multiply_loop
+
+
+ /*
+ * Multiply emulation loop done.
+ */
+
+ /* Now
+ * r3 = multiplicand
+ * r4 = OPX
+ * r6 = 4 * dest_register (used later as offset to sp)
+ * r7 = temp
+ * r9 = mul_product
+ * r10 = mulxuu_product
+ * r11 = original multiplier
+ */
+
+
+ /* Calculate address for result from 4 * dest_register */
+ add r6, r6, sp
+
+
+ /*
+ * Select/compute the result based on OPX.
+ */
+
+
+ /* OPX == mul? Then store. */
+ xori r7, r4, 0x27
+ beq r7, zero, store_product
+
+ /* It's one of the mulx.. opcodes. Move over the result. */
+ mov r9, r10
+
+ /* OPX == mulxuu? Then store. */
+ xori r7, r4, 0x07
+ beq r7, zero, store_product
+
+ /* Compute mulxsu
+ *
+ * mulxsu = mulxuu - (rA < 0) ? rB : 0;
+ */
+ bge r3, zero, mulxsu_skip
+ sub r9, r9, r11
+mulxsu_skip:
+
+ /* OPX == mulxsu? Then store. */
+ xori r7, r4, 0x17
+ beq r7, zero, store_product
+
+ /* Compute mulxss
+ *
+ * mulxss = mulxsu - (rB < 0) ? rA : 0;
+ */
+ bge r11,zero,mulxss_skip
+ sub r9, r9, r3
+mulxss_skip:
+ /* At this point, assume that OPX is mulxss, so store*/
+
+
+store_product:
+ stw r9, 0(r6)
+
+
+restore_registers:
+ /* No need to restore r0. */
+ ldw r5, 100(sp)
+ wrctl estatus, r5
+
+ ldw r1, 4(sp)
+ ldw r2, 8(sp)
+ ldw r3, 12(sp)
+ ldw r4, 16(sp)
+ ldw r5, 20(sp)
+ ldw r6, 24(sp)
+ ldw r7, 28(sp)
+ ldw r8, 32(sp)
+ ldw r9, 36(sp)
+ ldw r10, 40(sp)
+ ldw r11, 44(sp)
+ ldw r12, 48(sp)
+ ldw r13, 52(sp)
+ ldw r14, 56(sp)
+ ldw r15, 60(sp)
+ ldw r16, 64(sp)
+ ldw r17, 68(sp)
+ ldw r18, 72(sp)
+ ldw r19, 76(sp)
+ ldw r20, 80(sp)
+ ldw r21, 84(sp)
+ ldw r22, 88(sp)
+ ldw r23, 92(sp)
+ /* Does not need to restore et */
+ ldw gp, 104(sp)
+
+ ldw fp, 112(sp)
+ ldw ea, 116(sp)
+ ldw ra, 120(sp)
+ ldw sp, 108(sp) /* last restore sp */
+ eret
+
+.set at
+.set break
--- /dev/null
+/*
+ * Copyright (C) 2013 Altera Corporation
+ * Copyright (C) 2011 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2008 Thomas Chou <thomas@wytron.com.tw>
+ *
+ * based on irq.c from m68k which is:
+ *
+ * Copyright (C) 2007 Greg Ungerer <gerg@snapgear.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/of.h>
+
+static u32 ienable;
+
+asmlinkage void do_IRQ(int hwirq, struct pt_regs *regs)
+{
+ struct pt_regs *oldregs = set_irq_regs(regs);
+ int irq;
+
+ irq_enter();
+ irq = irq_find_mapping(NULL, hwirq);
+ generic_handle_irq(irq);
+ irq_exit();
+
+ set_irq_regs(oldregs);
+}
+
+static void chip_unmask(struct irq_data *d)
+{
+ ienable |= (1 << d->hwirq);
+ WRCTL(CTL_IENABLE, ienable);
+}
+
+static void chip_mask(struct irq_data *d)
+{
+ ienable &= ~(1 << d->hwirq);
+ WRCTL(CTL_IENABLE, ienable);
+}
+
+static struct irq_chip m_irq_chip = {
+ .name = "NIOS2-INTC",
+ .irq_unmask = chip_unmask,
+ .irq_mask = chip_mask,
+};
+
+static int irq_map(struct irq_domain *h, unsigned int virq,
+ irq_hw_number_t hw_irq_num)
+{
+ irq_set_chip_and_handler(virq, &m_irq_chip, handle_level_irq);
+
+ return 0;
+}
+
+static struct irq_domain_ops irq_ops = {
+ .map = irq_map,
+ .xlate = irq_domain_xlate_onecell,
+};
+
+void __init init_IRQ(void)
+{
+ struct irq_domain *domain;
+ struct device_node *node;
+
+ node = of_find_compatible_node(NULL, NULL, "altr,nios2-1.0");
+ if (!node)
+ node = of_find_compatible_node(NULL, NULL, "altr,nios2-1.1");
+
+ BUG_ON(!node);
+
+ domain = irq_domain_add_linear(node, NIOS2_CPU_NR_IRQS, &irq_ops, NULL);
+ BUG_ON(!domain);
+
+ irq_set_default_host(domain);
+ of_node_put(node);
+ /* Load the initial ienable value */
+ ienable = RDCTL(CTL_IENABLE);
+}
--- /dev/null
+/*
+ * linux/arch/nios2/kernel/misaligned.c
+ *
+ * basic emulation for mis-aligned accesses on the NIOS II cpu
+ * modelled after the version for arm in arm/alignment.c
+ *
+ * Brad Parker <brad@heeltoe.com>
+ * Copyright (C) 2010 Ambient Corporation
+ * Copyright (c) 2010 Altera Corporation, San Jose, California, USA.
+ * Copyright (c) 2010 Arrow Electronics, Inc.
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of
+ * this archive for more details.
+ */
+
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/proc_fs.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/uaccess.h>
+#include <linux/seq_file.h>
+
+#include <asm/traps.h>
+#include <asm/unaligned.h>
+
+/* instructions we emulate */
+#define INST_LDHU 0x0b
+#define INST_STH 0x0d
+#define INST_LDH 0x0f
+#define INST_STW 0x15
+#define INST_LDW 0x17
+
+static unsigned long ma_user, ma_kern, ma_skipped, ma_half, ma_word;
+
+static unsigned int ma_usermode;
+#define UM_WARN 0x01
+#define UM_FIXUP 0x02
+#define UM_SIGNAL 0x04
+#define KM_WARN 0x08
+
+/* see arch/nios2/include/asm/ptrace.h */
+static u8 sys_stack_frame_reg_offset[] = {
+ /* struct pt_regs */
+ 8, 9, 10, 11, 12, 13, 14, 15, 1, 2, 3, 4, 5, 6, 7, 0,
+ /* struct switch_stack */
+ 16, 17, 18, 19, 20, 21, 22, 23, 0, 0, 0, 0, 0, 0, 0, 0
+};
+
+static int reg_offsets[32];
+
+static inline u32 get_reg_val(struct pt_regs *fp, int reg)
+{
+ u8 *p = ((u8 *)fp) + reg_offsets[reg];
+
+ return *(u32 *)p;
+}
+
+static inline void put_reg_val(struct pt_regs *fp, int reg, u32 val)
+{
+ u8 *p = ((u8 *)fp) + reg_offsets[reg];
+ *(u32 *)p = val;
+}
+
+/*
+ * (mis)alignment handler
+ */
+asmlinkage void handle_unaligned_c(struct pt_regs *fp, int cause)
+{
+ u32 isn, addr, val;
+ int in_kernel;
+ u8 a, b, d0, d1, d2, d3;
+ u16 imm16;
+ unsigned int fault;
+
+ /* back up one instruction */
+ fp->ea -= 4;
+
+ if (fixup_exception(fp)) {
+ ma_skipped++;
+ return;
+ }
+
+ in_kernel = !user_mode(fp);
+
+ isn = *(unsigned long *)(fp->ea);
+
+ fault = 0;
+
+ /* do fixup if in kernel or mode turned on */
+ if (in_kernel || (ma_usermode & UM_FIXUP)) {
+ /* decompose instruction */
+ a = (isn >> 27) & 0x1f;
+ b = (isn >> 22) & 0x1f;
+ imm16 = (isn >> 6) & 0xffff;
+ addr = get_reg_val(fp, a) + imm16;
+
+ /* do fixup to saved registers */
+ switch (isn & 0x3f) {
+ case INST_LDHU:
+ fault |= __get_user(d0, (u8 *)(addr+0));
+ fault |= __get_user(d1, (u8 *)(addr+1));
+ val = (d1 << 8) | d0;
+ put_reg_val(fp, b, val);
+ ma_half++;
+ break;
+ case INST_STH:
+ val = get_reg_val(fp, b);
+ d1 = val >> 8;
+ d0 = val >> 0;
+
+ pr_debug("sth: ra=%d (%08x) rb=%d (%08x), imm16 %04x addr %08x val %08x\n",
+ a, get_reg_val(fp, a),
+ b, get_reg_val(fp, b),
+ imm16, addr, val);
+
+ if (in_kernel) {
+ *(u8 *)(addr+0) = d0;
+ *(u8 *)(addr+1) = d1;
+ } else {
+ fault |= __put_user(d0, (u8 *)(addr+0));
+ fault |= __put_user(d1, (u8 *)(addr+1));
+ }
+ ma_half++;
+ break;
+ case INST_LDH:
+ fault |= __get_user(d0, (u8 *)(addr+0));
+ fault |= __get_user(d1, (u8 *)(addr+1));
+ val = (short)((d1 << 8) | d0);
+ put_reg_val(fp, b, val);
+ ma_half++;
+ break;
+ case INST_STW:
+ val = get_reg_val(fp, b);
+ d3 = val >> 24;
+ d2 = val >> 16;
+ d1 = val >> 8;
+ d0 = val >> 0;
+ if (in_kernel) {
+ *(u8 *)(addr+0) = d0;
+ *(u8 *)(addr+1) = d1;
+ *(u8 *)(addr+2) = d2;
+ *(u8 *)(addr+3) = d3;
+ } else {
+ fault |= __put_user(d0, (u8 *)(addr+0));
+ fault |= __put_user(d1, (u8 *)(addr+1));
+ fault |= __put_user(d2, (u8 *)(addr+2));
+ fault |= __put_user(d3, (u8 *)(addr+3));
+ }
+ ma_word++;
+ break;
+ case INST_LDW:
+ fault |= __get_user(d0, (u8 *)(addr+0));
+ fault |= __get_user(d1, (u8 *)(addr+1));
+ fault |= __get_user(d2, (u8 *)(addr+2));
+ fault |= __get_user(d3, (u8 *)(addr+3));
+ val = (d3 << 24) | (d2 << 16) | (d1 << 8) | d0;
+ put_reg_val(fp, b, val);
+ ma_word++;
+ break;
+ }
+ }
+
+ addr = RDCTL(CTL_BADADDR);
+ cause >>= 2;
+
+ if (fault) {
+ if (in_kernel) {
+ pr_err("fault during kernel misaligned fixup @ %#lx; addr 0x%08x; isn=0x%08x\n",
+ fp->ea, (unsigned int)addr,
+ (unsigned int)isn);
+ } else {
+ pr_err("fault during user misaligned fixup @ %#lx; isn=%08x addr=0x%08x sp=0x%08lx pid=%d\n",
+ fp->ea,
+ (unsigned int)isn, addr, fp->sp,
+ current->pid);
+
+ _exception(SIGSEGV, fp, SEGV_MAPERR, fp->ea);
+ return;
+ }
+ }
+
+ /*
+ * kernel mode -
+ * note exception and skip bad instruction (return)
+ */
+ if (in_kernel) {
+ ma_kern++;
+ fp->ea += 4;
+
+ if (ma_usermode & KM_WARN) {
+ pr_err("kernel unaligned access @ %#lx; BADADDR 0x%08x; cause=%d, isn=0x%08x\n",
+ fp->ea,
+ (unsigned int)addr, cause,
+ (unsigned int)isn);
+ /* show_regs(fp); */
+ }
+
+ return;
+ }
+
+ ma_user++;
+
+ /*
+ * user mode -
+ * possibly warn,
+ * possibly send SIGBUS signal to process
+ */
+ if (ma_usermode & UM_WARN) {
+ pr_err("user unaligned access @ %#lx; isn=0x%08lx ea=0x%08lx ra=0x%08lx sp=0x%08lx\n",
+ (unsigned long)addr, (unsigned long)isn,
+ fp->ea, fp->ra, fp->sp);
+ }
+
+ if (ma_usermode & UM_SIGNAL)
+ _exception(SIGBUS, fp, BUS_ADRALN, fp->ea);
+ else
+ fp->ea += 4; /* else advance */
+}
+
+static void __init misaligned_calc_reg_offsets(void)
+{
+ int i, r, offset;
+
+ /* pre-calc offsets of registers on sys call stack frame */
+ offset = 0;
+
+ /* struct pt_regs */
+ for (i = 0; i < 16; i++) {
+ r = sys_stack_frame_reg_offset[i];
+ reg_offsets[r] = offset;
+ offset += 4;
+ }
+
+ /* struct switch_stack */
+ offset = -sizeof(struct switch_stack);
+ for (i = 16; i < 32; i++) {
+ r = sys_stack_frame_reg_offset[i];
+ reg_offsets[r] = offset;
+ offset += 4;
+ }
+}
+
+
+static int __init misaligned_init(void)
+{
+ /* default mode - silent fix */
+ ma_usermode = UM_FIXUP | KM_WARN;
+
+ misaligned_calc_reg_offsets();
+
+ return 0;
+}
+
+fs_initcall(misaligned_init);
--- /dev/null
+/*
+ * Kernel module support for Nios II.
+ *
+ * Copyright (C) 2004 Microtronix Datacom Ltd.
+ * Written by Wentao Xu <xuwentao@microtronix.com>
+ * Copyright (C) 2001, 2003 Rusty Russell
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <linux/moduleloader.h>
+#include <linux/elf.h>
+#include <linux/mm.h>
+#include <linux/vmalloc.h>
+#include <linux/slab.h>
+#include <linux/fs.h>
+#include <linux/string.h>
+#include <linux/kernel.h>
+
+#include <asm/pgtable.h>
+#include <asm/cacheflush.h>
+
+/*
+ * Modules should NOT be allocated with kmalloc for (obvious) reasons.
+ * But we do it for now to avoid relocation issues. CALL26/PCREL26 cannot reach
+ * from 0x80000000 (vmalloc area) to 0xc00000000 (kernel) (kmalloc returns
+ * addresses in 0xc0000000)
+ */
+void *module_alloc(unsigned long size)
+{
+ if (size == 0)
+ return NULL;
+ return kmalloc(size, GFP_KERNEL);
+}
+
+/* Free memory returned from module_alloc */
+void module_free(struct module *mod, void *module_region)
+{
+ kfree(module_region);
+}
+
+int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
+ unsigned int symindex, unsigned int relsec,
+ struct module *mod)
+{
+ unsigned int i;
+ Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
+
+ pr_debug("Applying relocate section %u to %u\n", relsec,
+ sechdrs[relsec].sh_info);
+
+ for (i = 0; i < sechdrs[relsec].sh_size / sizeof(*rela); i++) {
+ /* This is where to make the change */
+ uint32_t word;
+ uint32_t *loc
+ = ((void *)sechdrs[sechdrs[relsec].sh_info].sh_addr
+ + rela[i].r_offset);
+ /* This is the symbol it is referring to. Note that all
+ undefined symbols have been resolved. */
+ Elf32_Sym *sym
+ = ((Elf32_Sym *)sechdrs[symindex].sh_addr
+ + ELF32_R_SYM(rela[i].r_info));
+ uint32_t v = sym->st_value + rela[i].r_addend;
+
+ pr_debug("reltype %d 0x%x name:<%s>\n",
+ ELF32_R_TYPE(rela[i].r_info),
+ rela[i].r_offset, strtab + sym->st_name);
+
+ switch (ELF32_R_TYPE(rela[i].r_info)) {
+ case R_NIOS2_NONE:
+ break;
+ case R_NIOS2_BFD_RELOC_32:
+ *loc += v;
+ break;
+ case R_NIOS2_PCREL16:
+ v -= (uint32_t)loc + 4;
+ if ((int32_t)v > 0x7fff ||
+ (int32_t)v < -(int32_t)0x8000) {
+ pr_err("module %s: relocation overflow\n",
+ mod->name);
+ return -ENOEXEC;
+ }
+ word = *loc;
+ *loc = ((((word >> 22) << 16) | (v & 0xffff)) << 6) |
+ (word & 0x3f);
+ break;
+ case R_NIOS2_CALL26:
+ if (v & 3) {
+ pr_err("module %s: dangerous relocation\n",
+ mod->name);
+ return -ENOEXEC;
+ }
+ if ((v >> 28) != ((uint32_t)loc >> 28)) {
+ pr_err("module %s: relocation overflow\n",
+ mod->name);
+ return -ENOEXEC;
+ }
+ *loc = (*loc & 0x3f) | ((v >> 2) << 6);
+ break;
+ case R_NIOS2_HI16:
+ word = *loc;
+ *loc = ((((word >> 22) << 16) |
+ ((v >> 16) & 0xffff)) << 6) | (word & 0x3f);
+ break;
+ case R_NIOS2_LO16:
+ word = *loc;
+ *loc = ((((word >> 22) << 16) | (v & 0xffff)) << 6) |
+ (word & 0x3f);
+ break;
+ case R_NIOS2_HIADJ16:
+ {
+ Elf32_Addr word2;
+
+ word = *loc;
+ word2 = ((v >> 16) + ((v >> 15) & 1)) & 0xffff;
+ *loc = ((((word >> 22) << 16) | word2) << 6) |
+ (word & 0x3f);
+ }
+ break;
+
+ default:
+ pr_err("module %s: Unknown reloc: %u\n",
+ mod->name, ELF32_R_TYPE(rela[i].r_info));
+ return -ENOEXEC;
+ }
+ }
+
+ return 0;
+}
+
+int module_finalize(const Elf_Ehdr *hdr, const Elf_Shdr *sechdrs,
+ struct module *me)
+{
+ flush_cache_all();
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (C) 2004 Microtronix Datacom Ltd
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <linux/export.h>
+#include <linux/string.h>
+
+/* string functions */
+
+EXPORT_SYMBOL(memcpy);
+EXPORT_SYMBOL(memset);
+EXPORT_SYMBOL(memmove);
+
+/*
+ * libgcc functions - functions that are used internally by the
+ * compiler... (prototypes are not correct though, but that
+ * doesn't really matter since they're not versioned).
+ */
+#define DECLARE_EXPORT(name) extern void name(void); EXPORT_SYMBOL(name)
+
+DECLARE_EXPORT(__gcc_bcmp);
+DECLARE_EXPORT(__divsi3);
+DECLARE_EXPORT(__moddi3);
+DECLARE_EXPORT(__modsi3);
+DECLARE_EXPORT(__udivmoddi4);
+DECLARE_EXPORT(__udivsi3);
+DECLARE_EXPORT(__umoddi3);
+DECLARE_EXPORT(__umodsi3);
+DECLARE_EXPORT(__muldi3);
--- /dev/null
+/*
+ * Architecture-dependent parts of process handling.
+ *
+ * Copyright (C) 2013 Altera Corporation
+ * Copyright (C) 2010 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2009 Wind River Systems Inc
+ * Implemented by fredrik.markstrom@gmail.com and ivarholmqvist@gmail.com
+ * Copyright (C) 2004 Microtronix Datacom Ltd
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/export.h>
+#include <linux/sched.h>
+#include <linux/tick.h>
+#include <linux/uaccess.h>
+
+#include <asm/unistd.h>
+#include <asm/traps.h>
+#include <asm/cpuinfo.h>
+
+asmlinkage void ret_from_fork(void);
+asmlinkage void ret_from_kernel_thread(void);
+
+void (*pm_power_off)(void) = NULL;
+EXPORT_SYMBOL(pm_power_off);
+
+void arch_cpu_idle(void)
+{
+ local_irq_enable();
+}
+
+/*
+ * The development boards have no way to pull a board reset. Just jump to the
+ * cpu reset address and let the boot loader or the code in head.S take care of
+ * resetting peripherals.
+ */
+void machine_restart(char *__unused)
+{
+ pr_notice("Machine restart (%08x)...\n", cpuinfo.reset_addr);
+ local_irq_disable();
+ __asm__ __volatile__ (
+ "jmp %0\n\t"
+ :
+ : "r" (cpuinfo.reset_addr)
+ : "r4");
+}
+
+void machine_halt(void)
+{
+ pr_notice("Machine halt...\n");
+ local_irq_disable();
+ for (;;)
+ ;
+}
+
+/*
+ * There is no way to power off the development boards. So just spin for now. If
+ * we ever have a way of resetting a board using a GPIO we should add that here.
+ */
+void machine_power_off(void)
+{
+ pr_notice("Machine power off...\n");
+ local_irq_disable();
+ for (;;)
+ ;
+}
+
+void show_regs(struct pt_regs *regs)
+{
+ pr_notice("\n");
+ show_regs_print_info(KERN_DEFAULT);
+
+ pr_notice("r1: %08lx r2: %08lx r3: %08lx r4: %08lx\n",
+ regs->r1, regs->r2, regs->r3, regs->r4);
+
+ pr_notice("r5: %08lx r6: %08lx r7: %08lx r8: %08lx\n",
+ regs->r5, regs->r6, regs->r7, regs->r8);
+
+ pr_notice("r9: %08lx r10: %08lx r11: %08lx r12: %08lx\n",
+ regs->r9, regs->r10, regs->r11, regs->r12);
+
+ pr_notice("r13: %08lx r14: %08lx r15: %08lx\n",
+ regs->r13, regs->r14, regs->r15);
+
+ pr_notice("ra: %08lx fp: %08lx sp: %08lx gp: %08lx\n",
+ regs->ra, regs->fp, regs->sp, regs->gp);
+
+ pr_notice("ea: %08lx estatus: %08lx\n",
+ regs->ea, regs->estatus);
+}
+
+void flush_thread(void)
+{
+ set_fs(USER_DS);
+}
+
+int copy_thread(unsigned long clone_flags,
+ unsigned long usp, unsigned long arg, struct task_struct *p)
+{
+ struct pt_regs *childregs = task_pt_regs(p);
+ struct pt_regs *regs;
+ struct switch_stack *stack;
+ struct switch_stack *childstack =
+ ((struct switch_stack *)childregs) - 1;
+
+ if (unlikely(p->flags & PF_KTHREAD)) {
+ memset(childstack, 0,
+ sizeof(struct switch_stack) + sizeof(struct pt_regs));
+
+ childstack->r16 = usp; /* fn */
+ childstack->r17 = arg;
+ childstack->ra = (unsigned long) ret_from_kernel_thread;
+ childregs->estatus = STATUS_PIE;
+ childregs->sp = (unsigned long) childstack;
+
+ p->thread.ksp = (unsigned long) childstack;
+ p->thread.kregs = childregs;
+ return 0;
+ }
+
+ regs = current_pt_regs();
+ *childregs = *regs;
+ childregs->r2 = 0; /* Set the return value for the child. */
+ childregs->r7 = 0;
+
+ stack = ((struct switch_stack *) regs) - 1;
+ *childstack = *stack;
+ childstack->ra = (unsigned long)ret_from_fork;
+ p->thread.kregs = childregs;
+ p->thread.ksp = (unsigned long) childstack;
+
+ if (usp)
+ childregs->sp = usp;
+
+ /* Initialize tls register. */
+ if (clone_flags & CLONE_SETTLS)
+ childstack->r23 = regs->r8;
+
+ return 0;
+}
+
+/*
+ * Generic dumping code. Used for panic and debug.
+ */
+void dump(struct pt_regs *fp)
+{
+ unsigned long *sp;
+ unsigned char *tp;
+ int i;
+
+ pr_emerg("\nCURRENT PROCESS:\n\n");
+ pr_emerg("COMM=%s PID=%d\n", current->comm, current->pid);
+
+ if (current->mm) {
+ pr_emerg("TEXT=%08x-%08x DATA=%08x-%08x BSS=%08x-%08x\n",
+ (int) current->mm->start_code,
+ (int) current->mm->end_code,
+ (int) current->mm->start_data,
+ (int) current->mm->end_data,
+ (int) current->mm->end_data,
+ (int) current->mm->brk);
+ pr_emerg("USER-STACK=%08x KERNEL-STACK=%08x\n\n",
+ (int) current->mm->start_stack,
+ (int)(((unsigned long) current) + THREAD_SIZE));
+ }
+
+ pr_emerg("PC: %08lx\n", fp->ea);
+ pr_emerg("SR: %08lx SP: %08lx\n",
+ (long) fp->estatus, (long) fp);
+
+ pr_emerg("r1: %08lx r2: %08lx r3: %08lx\n",
+ fp->r1, fp->r2, fp->r3);
+
+ pr_emerg("r4: %08lx r5: %08lx r6: %08lx r7: %08lx\n",
+ fp->r4, fp->r5, fp->r6, fp->r7);
+ pr_emerg("r8: %08lx r9: %08lx r10: %08lx r11: %08lx\n",
+ fp->r8, fp->r9, fp->r10, fp->r11);
+ pr_emerg("r12: %08lx r13: %08lx r14: %08lx r15: %08lx\n",
+ fp->r12, fp->r13, fp->r14, fp->r15);
+ pr_emerg("or2: %08lx ra: %08lx fp: %08lx sp: %08lx\n",
+ fp->orig_r2, fp->ra, fp->fp, fp->sp);
+ pr_emerg("\nUSP: %08x TRAPFRAME: %08x\n",
+ (unsigned int) fp->sp, (unsigned int) fp);
+
+ pr_emerg("\nCODE:");
+ tp = ((unsigned char *) fp->ea) - 0x20;
+ for (sp = (unsigned long *) tp, i = 0; (i < 0x40); i += 4) {
+ if ((i % 0x10) == 0)
+ pr_emerg("\n%08x: ", (int) (tp + i));
+ pr_emerg("%08x ", (int) *sp++);
+ }
+ pr_emerg("\n");
+
+ pr_emerg("\nKERNEL STACK:");
+ tp = ((unsigned char *) fp) - 0x40;
+ for (sp = (unsigned long *) tp, i = 0; (i < 0xc0); i += 4) {
+ if ((i % 0x10) == 0)
+ pr_emerg("\n%08x: ", (int) (tp + i));
+ pr_emerg("%08x ", (int) *sp++);
+ }
+ pr_emerg("\n");
+ pr_emerg("\n");
+
+ pr_emerg("\nUSER STACK:");
+ tp = (unsigned char *) (fp->sp - 0x10);
+ for (sp = (unsigned long *) tp, i = 0; (i < 0x80); i += 4) {
+ if ((i % 0x10) == 0)
+ pr_emerg("\n%08x: ", (int) (tp + i));
+ pr_emerg("%08x ", (int) *sp++);
+ }
+ pr_emerg("\n\n");
+}
+
+unsigned long get_wchan(struct task_struct *p)
+{
+ unsigned long fp, pc;
+ unsigned long stack_page;
+ int count = 0;
+
+ if (!p || p == current || p->state == TASK_RUNNING)
+ return 0;
+
+ stack_page = (unsigned long)p;
+ fp = ((struct switch_stack *)p->thread.ksp)->fp; /* ;dgt2 */
+ do {
+ if (fp < stack_page+sizeof(struct task_struct) ||
+ fp >= 8184+stack_page) /* ;dgt2;tmp */
+ return 0;
+ pc = ((unsigned long *)fp)[1];
+ if (!in_sched_functions(pc))
+ return pc;
+ fp = *(unsigned long *) fp;
+ } while (count++ < 16); /* ;dgt2;tmp */
+ return 0;
+}
+
+/*
+ * Do necessary setup to start up a newly executed thread.
+ * Will startup in user mode (status_extension = 0).
+ */
+void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long sp)
+{
+ memset((void *) regs, 0, sizeof(struct pt_regs));
+ regs->estatus = ESTATUS_EPIE | ESTATUS_EU;
+ regs->ea = pc;
+ regs->sp = sp;
+}
+
+#include <linux/elfcore.h>
+
+/* Fill in the FPU structure for a core dump. */
+int dump_fpu(struct pt_regs *regs, elf_fpregset_t *r)
+{
+ return 0; /* Nios2 has no FPU and thus no FPU registers */
+}
--- /dev/null
+/*
+ * Device tree support
+ *
+ * Copyright (C) 2013 Altera Corporation
+ * Copyright (C) 2010 Thomas Chou <thomas@wytron.com.tw>
+ *
+ * Based on MIPS support for CONFIG_OF device tree support
+ *
+ * Copyright (C) 2010 Cisco Systems Inc. <dediao@cisco.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/bootmem.h>
+#include <linux/of.h>
+#include <linux/of_fdt.h>
+#include <linux/io.h>
+
+#include <asm/sections.h>
+
+void __init early_init_dt_add_memory_arch(u64 base, u64 size)
+{
+ u64 kernel_start = (u64)virt_to_phys(_text);
+
+ if (!memory_size &&
+ (kernel_start >= base) && (kernel_start < (base + size)))
+ memory_size = size;
+
+}
+
+void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
+{
+ return alloc_bootmem_align(size, align);
+}
+
+void __init early_init_devtree(void *params)
+{
+ __be32 *dtb = (u32 *)__dtb_start;
+#if defined(CONFIG_NIOS2_DTB_AT_PHYS_ADDR)
+ if (be32_to_cpup((__be32 *)CONFIG_NIOS2_DTB_PHYS_ADDR) ==
+ OF_DT_HEADER) {
+ params = (void *)CONFIG_NIOS2_DTB_PHYS_ADDR;
+ early_init_dt_scan(params);
+ return;
+ }
+#endif
+ if (be32_to_cpu((__be32) *dtb) == OF_DT_HEADER)
+ params = (void *)__dtb_start;
+
+ early_init_dt_scan(params);
+}
--- /dev/null
+/*
+ * Copyright (C) 2014 Altera Corporation
+ * Copyright (C) 2010 Tobias Klauser <tklauser@distanz.ch>
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <linux/elf.h>
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/ptrace.h>
+#include <linux/regset.h>
+#include <linux/sched.h>
+#include <linux/tracehook.h>
+#include <linux/uaccess.h>
+#include <linux/user.h>
+
+static int genregs_get(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ void *kbuf, void __user *ubuf)
+{
+ const struct pt_regs *regs = task_pt_regs(target);
+ const struct switch_stack *sw = (struct switch_stack *)regs - 1;
+ int ret = 0;
+
+#define REG_O_ZERO_RANGE(START, END) \
+ if (!ret) \
+ ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf, \
+ START * 4, (END * 4) + 4);
+
+#define REG_O_ONE(PTR, LOC) \
+ if (!ret) \
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, PTR, \
+ LOC * 4, (LOC * 4) + 4);
+
+#define REG_O_RANGE(PTR, START, END) \
+ if (!ret) \
+ ret = user_regset_copyout(&pos, &count, &kbuf, &ubuf, PTR, \
+ START * 4, (END * 4) + 4);
+
+ REG_O_ZERO_RANGE(PTR_R0, PTR_R0);
+ REG_O_RANGE(®s->r1, PTR_R1, PTR_R7);
+ REG_O_RANGE(®s->r8, PTR_R8, PTR_R15);
+ REG_O_RANGE(sw, PTR_R16, PTR_R23);
+ REG_O_ZERO_RANGE(PTR_R24, PTR_R25); /* et and bt */
+ REG_O_ONE(®s->gp, PTR_GP);
+ REG_O_ONE(®s->sp, PTR_SP);
+ REG_O_ONE(®s->fp, PTR_FP);
+ REG_O_ONE(®s->ea, PTR_EA);
+ REG_O_ZERO_RANGE(PTR_BA, PTR_BA);
+ REG_O_ONE(®s->ra, PTR_RA);
+ REG_O_ONE(®s->ea, PTR_PC); /* use ea for PC */
+ if (!ret)
+ ret = user_regset_copyout_zero(&pos, &count, &kbuf, &ubuf,
+ PTR_STATUS * 4, -1);
+
+ return ret;
+}
+
+/*
+ * Set the thread state from a regset passed in via ptrace
+ */
+static int genregs_set(struct task_struct *target,
+ const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ struct pt_regs *regs = task_pt_regs(target);
+ const struct switch_stack *sw = (struct switch_stack *)regs - 1;
+ int ret = 0;
+
+#define REG_IGNORE_RANGE(START, END) \
+ if (!ret) \
+ ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf, \
+ START * 4, (END * 4) + 4);
+
+#define REG_IN_ONE(PTR, LOC) \
+ if (!ret) \
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, \
+ (void *)(PTR), LOC * 4, (LOC * 4) + 4);
+
+#define REG_IN_RANGE(PTR, START, END) \
+ if (!ret) \
+ ret = user_regset_copyin(&pos, &count, &kbuf, &ubuf, \
+ (void *)(PTR), START * 4, (END * 4) + 4);
+
+ REG_IGNORE_RANGE(PTR_R0, PTR_R0);
+ REG_IN_RANGE(®s->r1, PTR_R1, PTR_R7);
+ REG_IN_RANGE(®s->r8, PTR_R8, PTR_R15);
+ REG_IN_RANGE(sw, PTR_R16, PTR_R23);
+ REG_IGNORE_RANGE(PTR_R24, PTR_R25); /* et and bt */
+ REG_IN_ONE(®s->gp, PTR_GP);
+ REG_IN_ONE(®s->sp, PTR_SP);
+ REG_IN_ONE(®s->fp, PTR_FP);
+ REG_IN_ONE(®s->ea, PTR_EA);
+ REG_IGNORE_RANGE(PTR_BA, PTR_BA);
+ REG_IN_ONE(®s->ra, PTR_RA);
+ REG_IN_ONE(®s->ea, PTR_PC); /* use ea for PC */
+ if (!ret)
+ ret = user_regset_copyin_ignore(&pos, &count, &kbuf, &ubuf,
+ PTR_STATUS * 4, -1);
+
+ return ret;
+}
+
+/*
+ * Define the register sets available on Nios2 under Linux
+ */
+enum nios2_regset {
+ REGSET_GENERAL,
+};
+
+static const struct user_regset nios2_regsets[] = {
+ [REGSET_GENERAL] = {
+ .core_note_type = NT_PRSTATUS,
+ .n = NUM_PTRACE_REG,
+ .size = sizeof(unsigned long),
+ .align = sizeof(unsigned long),
+ .get = genregs_get,
+ .set = genregs_set,
+ }
+};
+
+static const struct user_regset_view nios2_user_view = {
+ .name = "nios2",
+ .e_machine = ELF_ARCH,
+ .ei_osabi = ELF_OSABI,
+ .regsets = nios2_regsets,
+ .n = ARRAY_SIZE(nios2_regsets)
+};
+
+const struct user_regset_view *task_user_regset_view(struct task_struct *task)
+{
+ return &nios2_user_view;
+}
+
+void ptrace_disable(struct task_struct *child)
+{
+
+}
+
+long arch_ptrace(struct task_struct *child, long request, unsigned long addr,
+ unsigned long data)
+{
+ return ptrace_request(child, request, addr, data);
+}
+
+asmlinkage int do_syscall_trace_enter(void)
+{
+ int ret = 0;
+
+ if (test_thread_flag(TIF_SYSCALL_TRACE))
+ ret = tracehook_report_syscall_entry(task_pt_regs(current));
+
+ return ret;
+}
+
+asmlinkage void do_syscall_trace_exit(void)
+{
+ if (test_thread_flag(TIF_SYSCALL_TRACE))
+ tracehook_report_syscall_exit(task_pt_regs(current), 0);
+}
--- /dev/null
+/*
+ * Nios2-specific parts of system setup
+ *
+ * Copyright (C) 2010 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2004 Microtronix Datacom Ltd.
+ * Copyright (C) 2001 Vic Phillips <vic@microtronix.com>
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/console.h>
+#include <linux/bootmem.h>
+#include <linux/initrd.h>
+#include <linux/of_fdt.h>
+
+#include <asm/mmu_context.h>
+#include <asm/sections.h>
+#include <asm/setup.h>
+#include <asm/cpuinfo.h>
+
+unsigned long memory_start;
+EXPORT_SYMBOL(memory_start);
+
+unsigned long memory_end;
+EXPORT_SYMBOL(memory_end);
+
+unsigned long memory_size;
+
+static struct pt_regs fake_regs = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0,
+ 0};
+
+/* Copy a short hook instruction sequence to the exception address */
+static inline void copy_exception_handler(unsigned int addr)
+{
+ unsigned int start = (unsigned int) exception_handler_hook;
+ volatile unsigned int tmp = 0;
+
+ if (start == addr) {
+ /* The CPU exception address already points to the handler. */
+ return;
+ }
+
+ __asm__ __volatile__ (
+ "ldw %2,0(%0)\n"
+ "stw %2,0(%1)\n"
+ "ldw %2,4(%0)\n"
+ "stw %2,4(%1)\n"
+ "ldw %2,8(%0)\n"
+ "stw %2,8(%1)\n"
+ "flushd 0(%1)\n"
+ "flushd 4(%1)\n"
+ "flushd 8(%1)\n"
+ "flushi %1\n"
+ "addi %1,%1,4\n"
+ "flushi %1\n"
+ "addi %1,%1,4\n"
+ "flushi %1\n"
+ "flushp\n"
+ : /* no output registers */
+ : "r" (start), "r" (addr), "r" (tmp)
+ : "memory"
+ );
+}
+
+/* Copy the fast TLB miss handler */
+static inline void copy_fast_tlb_miss_handler(unsigned int addr)
+{
+ unsigned int start = (unsigned int) fast_handler;
+ unsigned int end = (unsigned int) fast_handler_end;
+ volatile unsigned int tmp = 0;
+
+ __asm__ __volatile__ (
+ "1:\n"
+ " ldw %3,0(%0)\n"
+ " stw %3,0(%1)\n"
+ " flushd 0(%1)\n"
+ " flushi %1\n"
+ " flushp\n"
+ " addi %0,%0,4\n"
+ " addi %1,%1,4\n"
+ " bne %0,%2,1b\n"
+ : /* no output registers */
+ : "r" (start), "r" (addr), "r" (end), "r" (tmp)
+ : "memory"
+ );
+}
+
+/*
+ * save args passed from u-boot, called from head.S
+ *
+ * @r4: NIOS magic
+ * @r5: initrd start
+ * @r6: initrd end or fdt
+ * @r7: kernel command line
+ */
+asmlinkage void __init nios2_boot_init(unsigned r4, unsigned r5, unsigned r6,
+ unsigned r7)
+{
+ unsigned dtb_passed = 0;
+ char cmdline_passed[COMMAND_LINE_SIZE] = { 0, };
+
+#if defined(CONFIG_NIOS2_PASS_CMDLINE)
+ if (r4 == 0x534f494e) { /* r4 is magic NIOS */
+#if defined(CONFIG_BLK_DEV_INITRD)
+ if (r5) { /* initramfs */
+ initrd_start = r5;
+ initrd_end = r6;
+ }
+#endif /* CONFIG_BLK_DEV_INITRD */
+ dtb_passed = r6;
+
+ if (r7)
+ strncpy(cmdline_passed, (char *)r7, COMMAND_LINE_SIZE);
+ }
+#endif
+
+ early_init_devtree((void *)dtb_passed);
+
+#ifndef CONFIG_CMDLINE_FORCE
+ if (cmdline_passed[0])
+ strncpy(boot_command_line, cmdline_passed, COMMAND_LINE_SIZE);
+#ifdef CONFIG_NIOS2_CMDLINE_IGNORE_DTB
+ else
+ strncpy(boot_command_line, CONFIG_CMDLINE, COMMAND_LINE_SIZE);
+#endif
+#endif
+}
+
+void __init setup_arch(char **cmdline_p)
+{
+ int bootmap_size;
+
+ console_verbose();
+
+ memory_start = PAGE_ALIGN((unsigned long)__pa(_end));
+ memory_end = (unsigned long) CONFIG_NIOS2_MEM_BASE + memory_size;
+
+ init_mm.start_code = (unsigned long) _stext;
+ init_mm.end_code = (unsigned long) _etext;
+ init_mm.end_data = (unsigned long) _edata;
+ init_mm.brk = (unsigned long) _end;
+ init_task.thread.kregs = &fake_regs;
+
+ /* Keep a copy of command line */
+ *cmdline_p = boot_command_line;
+
+ min_low_pfn = PFN_UP(memory_start);
+ max_low_pfn = PFN_DOWN(memory_end);
+ max_mapnr = max_low_pfn;
+
+ /*
+ * give all the memory to the bootmap allocator, tell it to put the
+ * boot mem_map at the start of memory
+ */
+ pr_debug("init_bootmem_node(?,%#lx, %#x, %#lx)\n",
+ min_low_pfn, PFN_DOWN(PHYS_OFFSET), max_low_pfn);
+ bootmap_size = init_bootmem_node(NODE_DATA(0),
+ min_low_pfn, PFN_DOWN(PHYS_OFFSET),
+ max_low_pfn);
+
+ /*
+ * free the usable memory, we have to make sure we do not free
+ * the bootmem bitmap so we then reserve it after freeing it :-)
+ */
+ pr_debug("free_bootmem(%#lx, %#lx)\n",
+ memory_start, memory_end - memory_start);
+ free_bootmem(memory_start, memory_end - memory_start);
+
+ /*
+ * Reserve the bootmem bitmap itself as well. We do this in two
+ * steps (first step was init_bootmem()) because this catches
+ * the (very unlikely) case of us accidentally initializing the
+ * bootmem allocator with an invalid RAM area.
+ *
+ * Arguments are start, size
+ */
+ pr_debug("reserve_bootmem(%#lx, %#x)\n", memory_start, bootmap_size);
+ reserve_bootmem(memory_start, bootmap_size, BOOTMEM_DEFAULT);
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ if (initrd_start) {
+ reserve_bootmem(virt_to_phys((void *)initrd_start),
+ initrd_end - initrd_start, BOOTMEM_DEFAULT);
+ }
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+ unflatten_and_copy_device_tree();
+
+ setup_cpuinfo();
+
+ copy_exception_handler(cpuinfo.exception_addr);
+
+ mmu_init();
+
+ copy_fast_tlb_miss_handler(cpuinfo.fast_tlb_miss_exc_addr);
+
+ /*
+ * Initialize MMU context handling here because data from cpuinfo is
+ * needed for this.
+ */
+ mmu_context_init();
+
+ /*
+ * get kmalloc into gear
+ */
+ paging_init();
+
+#if defined(CONFIG_VT) && defined(CONFIG_DUMMY_CONSOLE)
+ conswitchp = &dummy_con;
+#endif
+}
--- /dev/null
+/*
+ * Copyright (C) 2013-2014 Altera Corporation
+ * Copyright (C) 2011-2012 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2004 Microtronix Datacom Ltd
+ * Copyright (C) 1991, 1992 Linus Torvalds
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/ptrace.h>
+#include <linux/uaccess.h>
+#include <linux/unistd.h>
+#include <linux/personality.h>
+#include <linux/tracehook.h>
+
+#include <asm/ucontext.h>
+#include <asm/cacheflush.h>
+
+#define _BLOCKABLE (~(sigmask(SIGKILL) | sigmask(SIGSTOP)))
+
+/*
+ * Do a signal return; undo the signal stack.
+ *
+ * Keep the return code on the stack quadword aligned!
+ * That makes the cache flush below easier.
+ */
+
+struct rt_sigframe {
+ struct siginfo info;
+ struct ucontext uc;
+};
+
+static inline int rt_restore_ucontext(struct pt_regs *regs,
+ struct switch_stack *sw,
+ struct ucontext *uc, int *pr2)
+{
+ int temp;
+ greg_t *gregs = uc->uc_mcontext.gregs;
+ int err;
+
+ /* Always make any pending restarted system calls return -EINTR */
+ current_thread_info()->restart_block.fn = do_no_restart_syscall;
+
+ err = __get_user(temp, &uc->uc_mcontext.version);
+ if (temp != MCONTEXT_VERSION)
+ goto badframe;
+ /* restore passed registers */
+ err |= __get_user(regs->r1, &gregs[0]);
+ err |= __get_user(regs->r2, &gregs[1]);
+ err |= __get_user(regs->r3, &gregs[2]);
+ err |= __get_user(regs->r4, &gregs[3]);
+ err |= __get_user(regs->r5, &gregs[4]);
+ err |= __get_user(regs->r6, &gregs[5]);
+ err |= __get_user(regs->r7, &gregs[6]);
+ err |= __get_user(regs->r8, &gregs[7]);
+ err |= __get_user(regs->r9, &gregs[8]);
+ err |= __get_user(regs->r10, &gregs[9]);
+ err |= __get_user(regs->r11, &gregs[10]);
+ err |= __get_user(regs->r12, &gregs[11]);
+ err |= __get_user(regs->r13, &gregs[12]);
+ err |= __get_user(regs->r14, &gregs[13]);
+ err |= __get_user(regs->r15, &gregs[14]);
+ err |= __get_user(sw->r16, &gregs[15]);
+ err |= __get_user(sw->r17, &gregs[16]);
+ err |= __get_user(sw->r18, &gregs[17]);
+ err |= __get_user(sw->r19, &gregs[18]);
+ err |= __get_user(sw->r20, &gregs[19]);
+ err |= __get_user(sw->r21, &gregs[20]);
+ err |= __get_user(sw->r22, &gregs[21]);
+ err |= __get_user(sw->r23, &gregs[22]);
+ /* gregs[23] is handled below */
+ err |= __get_user(sw->fp, &gregs[24]); /* Verify, should this be
+ settable */
+ err |= __get_user(sw->gp, &gregs[25]); /* Verify, should this be
+ settable */
+
+ err |= __get_user(temp, &gregs[26]); /* Not really necessary no user
+ settable bits */
+ err |= __get_user(regs->ea, &gregs[27]);
+
+ err |= __get_user(regs->ra, &gregs[23]);
+ err |= __get_user(regs->sp, &gregs[28]);
+
+ regs->orig_r2 = -1; /* disable syscall checks */
+
+ err |= restore_altstack(&uc->uc_stack);
+ if (err)
+ goto badframe;
+
+ *pr2 = regs->r2;
+ return err;
+
+badframe:
+ return 1;
+}
+
+asmlinkage int do_rt_sigreturn(struct switch_stack *sw)
+{
+ struct pt_regs *regs = (struct pt_regs *)(sw + 1);
+ /* Verify, can we follow the stack back */
+ struct rt_sigframe *frame = (struct rt_sigframe *) regs->sp;
+ sigset_t set;
+ int rval;
+
+ if (!access_ok(VERIFY_READ, frame, sizeof(*frame)))
+ goto badframe;
+
+ if (__copy_from_user(&set, &frame->uc.uc_sigmask, sizeof(set)))
+ goto badframe;
+
+ set_current_blocked(&set);
+
+ if (rt_restore_ucontext(regs, sw, &frame->uc, &rval))
+ goto badframe;
+
+ return rval;
+
+badframe:
+ force_sig(SIGSEGV, current);
+ return 0;
+}
+
+static inline int rt_setup_ucontext(struct ucontext *uc, struct pt_regs *regs)
+{
+ struct switch_stack *sw = (struct switch_stack *)regs - 1;
+ greg_t *gregs = uc->uc_mcontext.gregs;
+ int err = 0;
+
+ err |= __put_user(MCONTEXT_VERSION, &uc->uc_mcontext.version);
+ err |= __put_user(regs->r1, &gregs[0]);
+ err |= __put_user(regs->r2, &gregs[1]);
+ err |= __put_user(regs->r3, &gregs[2]);
+ err |= __put_user(regs->r4, &gregs[3]);
+ err |= __put_user(regs->r5, &gregs[4]);
+ err |= __put_user(regs->r6, &gregs[5]);
+ err |= __put_user(regs->r7, &gregs[6]);
+ err |= __put_user(regs->r8, &gregs[7]);
+ err |= __put_user(regs->r9, &gregs[8]);
+ err |= __put_user(regs->r10, &gregs[9]);
+ err |= __put_user(regs->r11, &gregs[10]);
+ err |= __put_user(regs->r12, &gregs[11]);
+ err |= __put_user(regs->r13, &gregs[12]);
+ err |= __put_user(regs->r14, &gregs[13]);
+ err |= __put_user(regs->r15, &gregs[14]);
+ err |= __put_user(sw->r16, &gregs[15]);
+ err |= __put_user(sw->r17, &gregs[16]);
+ err |= __put_user(sw->r18, &gregs[17]);
+ err |= __put_user(sw->r19, &gregs[18]);
+ err |= __put_user(sw->r20, &gregs[19]);
+ err |= __put_user(sw->r21, &gregs[20]);
+ err |= __put_user(sw->r22, &gregs[21]);
+ err |= __put_user(sw->r23, &gregs[22]);
+ err |= __put_user(regs->ra, &gregs[23]);
+ err |= __put_user(sw->fp, &gregs[24]);
+ err |= __put_user(sw->gp, &gregs[25]);
+ err |= __put_user(regs->ea, &gregs[27]);
+ err |= __put_user(regs->sp, &gregs[28]);
+ return err;
+}
+
+static inline void *get_sigframe(struct ksignal *ksig, struct pt_regs *regs,
+ size_t frame_size)
+{
+ unsigned long usp;
+
+ /* Default to using normal stack. */
+ usp = regs->sp;
+
+ /* This is the X/Open sanctioned signal stack switching. */
+ usp = sigsp(usp, ksig);
+
+ /* Verify, is it 32 or 64 bit aligned */
+ return (void *)((usp - frame_size) & -8UL);
+}
+
+static int setup_rt_frame(struct ksignal *ksig, sigset_t *set,
+ struct pt_regs *regs)
+{
+ struct rt_sigframe *frame;
+ int err = 0;
+
+ frame = get_sigframe(ksig, regs, sizeof(*frame));
+
+ if (ksig->ka.sa.sa_flags & SA_SIGINFO)
+ err |= copy_siginfo_to_user(&frame->info, &ksig->info);
+
+ /* Create the ucontext. */
+ err |= __put_user(0, &frame->uc.uc_flags);
+ err |= __put_user(0, &frame->uc.uc_link);
+ err |= __save_altstack(&frame->uc.uc_stack, regs->sp);
+ err |= rt_setup_ucontext(&frame->uc, regs);
+ err |= copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set));
+
+ if (err)
+ goto give_sigsegv;
+
+ /* Set up to return from userspace; jump to fixed address sigreturn
+ trampoline on kuser page. */
+ regs->ra = (unsigned long) (0x1040);
+
+ /* Set up registers for signal handler */
+ regs->sp = (unsigned long) frame;
+ regs->r4 = (unsigned long) ksig->sig;
+ regs->r5 = (unsigned long) &frame->info;
+ regs->r6 = (unsigned long) &frame->uc;
+ regs->ea = (unsigned long) ksig->ka.sa.sa_handler;
+ return 0;
+
+give_sigsegv:
+ force_sigsegv(ksig->sig, current);
+ return -EFAULT;
+}
+
+/*
+ * OK, we're invoking a handler
+ */
+static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
+{
+ int ret;
+ sigset_t *oldset = sigmask_to_save();
+
+ /* set up the stack frame */
+ ret = setup_rt_frame(ksig, oldset, regs);
+
+ signal_setup_done(ret, ksig, 0);
+}
+
+static int do_signal(struct pt_regs *regs)
+{
+ unsigned int retval = 0, continue_addr = 0, restart_addr = 0;
+ int restart = 0;
+ struct ksignal ksig;
+
+ current->thread.kregs = regs;
+
+ /*
+ * If we were from a system call, check for system call restarting...
+ */
+ if (regs->orig_r2 >= 0) {
+ continue_addr = regs->ea;
+ restart_addr = continue_addr - 4;
+ retval = regs->r2;
+
+ /*
+ * Prepare for system call restart. We do this here so that a
+ * debugger will see the already changed PC.
+ */
+ switch (retval) {
+ case ERESTART_RESTARTBLOCK:
+ restart = -2;
+ case ERESTARTNOHAND:
+ case ERESTARTSYS:
+ case ERESTARTNOINTR:
+ restart++;
+ regs->r2 = regs->orig_r2;
+ regs->r7 = regs->orig_r7;
+ regs->ea = restart_addr;
+ break;
+ }
+ }
+
+ if (get_signal(&ksig)) {
+ /* handler */
+ if (unlikely(restart && regs->ea == restart_addr)) {
+ if (retval == ERESTARTNOHAND ||
+ retval == ERESTART_RESTARTBLOCK ||
+ (retval == ERESTARTSYS
+ && !(ksig.ka.sa.sa_flags & SA_RESTART))) {
+ regs->r2 = EINTR;
+ regs->r7 = 1;
+ regs->ea = continue_addr;
+ }
+ }
+ handle_signal(&ksig, regs);
+ return 0;
+ }
+
+ /*
+ * No handler present
+ */
+ if (unlikely(restart) && regs->ea == restart_addr) {
+ regs->ea = continue_addr;
+ regs->r2 = __NR_restart_syscall;
+ }
+
+ /*
+ * If there's no signal to deliver, we just put the saved sigmask back.
+ */
+ restore_saved_sigmask();
+
+ return restart;
+}
+
+asmlinkage int do_notify_resume(struct pt_regs *regs)
+{
+ /*
+ * We want the common case to go fast, which is why we may in certain
+ * cases get here from kernel mode. Just return without doing anything
+ * if so.
+ */
+ if (!user_mode(regs))
+ return 0;
+
+ if (test_thread_flag(TIF_SIGPENDING)) {
+ int restart = do_signal(regs);
+
+ if (unlikely(restart)) {
+ /*
+ * Restart without handlers.
+ * Deal with it without leaving
+ * the kernel space.
+ */
+ return restart;
+ }
+ } else if (test_and_clear_thread_flag(TIF_NOTIFY_RESUME))
+ tracehook_notify_resume(regs);
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (C) 2013 Altera Corporation
+ * Copyright (C) 2011-2012 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2004 Microtronix Datacom Ltd.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/export.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/syscalls.h>
+
+#include <asm/cacheflush.h>
+#include <asm/traps.h>
+
+/* sys_cacheflush -- flush the processor cache. */
+asmlinkage int sys_cacheflush(unsigned long addr, unsigned long len,
+ unsigned int op)
+{
+ struct vm_area_struct *vma;
+
+ if (len == 0)
+ return 0;
+
+ /* We only support op 0 now, return error if op is non-zero.*/
+ if (op)
+ return -EINVAL;
+
+ /* Check for overflow */
+ if (addr + len < addr)
+ return -EFAULT;
+
+ /*
+ * Verify that the specified address region actually belongs
+ * to this process.
+ */
+ vma = find_vma(current->mm, addr);
+ if (vma == NULL || addr < vma->vm_start || addr + len > vma->vm_end)
+ return -EFAULT;
+
+ flush_cache_range(vma, addr, addr + len);
+
+ return 0;
+}
+
+asmlinkage int sys_getpagesize(void)
+{
+ return PAGE_SIZE;
+}
--- /dev/null
+/*
+ * Copyright Altera Corporation (C) 2013. All rights reserved
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <linux/syscalls.h>
+#include <linux/signal.h>
+#include <linux/unistd.h>
+
+#include <asm/syscalls.h>
+
+#undef __SYSCALL
+#define __SYSCALL(nr, call) [nr] = (call),
+
+void *sys_call_table[__NR_syscalls] = {
+#include <asm/unistd.h>
+};
--- /dev/null
+/*
+ * Copyright (C) 2013-2014 Altera Corporation
+ * Copyright (C) 2010 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2004 Microtronix Datacom Ltd.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/clockchips.h>
+#include <linux/clocksource.h>
+#include <linux/delay.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+
+#define ALTERA_TIMER_STATUS_REG 0
+#define ALTERA_TIMER_CONTROL_REG 4
+#define ALTERA_TIMER_PERIODL_REG 8
+#define ALTERA_TIMER_PERIODH_REG 12
+#define ALTERA_TIMER_SNAPL_REG 16
+#define ALTERA_TIMER_SNAPH_REG 20
+
+#define ALTERA_TIMER_CONTROL_ITO_MSK (0x1)
+#define ALTERA_TIMER_CONTROL_CONT_MSK (0x2)
+#define ALTERA_TIMER_CONTROL_START_MSK (0x4)
+#define ALTERA_TIMER_CONTROL_STOP_MSK (0x8)
+
+struct nios2_timer {
+ void __iomem *base;
+ unsigned long freq;
+};
+
+struct nios2_clockevent_dev {
+ struct nios2_timer timer;
+ struct clock_event_device ced;
+};
+
+struct nios2_clocksource {
+ struct nios2_timer timer;
+ struct clocksource cs;
+};
+
+static inline struct nios2_clockevent_dev *
+ to_nios2_clkevent(struct clock_event_device *evt)
+{
+ return container_of(evt, struct nios2_clockevent_dev, ced);
+}
+
+static inline struct nios2_clocksource *
+ to_nios2_clksource(struct clocksource *cs)
+{
+ return container_of(cs, struct nios2_clocksource, cs);
+}
+
+static u16 timer_readw(struct nios2_timer *timer, u32 offs)
+{
+ return readw(timer->base + offs);
+}
+
+static void timer_writew(struct nios2_timer *timer, u16 val, u32 offs)
+{
+ writew(val, timer->base + offs);
+}
+
+static inline unsigned long read_timersnapshot(struct nios2_timer *timer)
+{
+ unsigned long count;
+
+ timer_writew(timer, 0, ALTERA_TIMER_SNAPL_REG);
+ count = timer_readw(timer, ALTERA_TIMER_SNAPH_REG) << 16 |
+ timer_readw(timer, ALTERA_TIMER_SNAPL_REG);
+
+ return count;
+}
+
+static cycle_t nios2_timer_read(struct clocksource *cs)
+{
+ struct nios2_clocksource *nios2_cs = to_nios2_clksource(cs);
+ unsigned long flags;
+ u32 count;
+
+ local_irq_save(flags);
+ count = read_timersnapshot(&nios2_cs->timer);
+ local_irq_restore(flags);
+
+ /* Counter is counting down */
+ return ~count;
+}
+
+static struct nios2_clocksource nios2_cs = {
+ .cs = {
+ .name = "nios2-clksrc",
+ .rating = 250,
+ .read = nios2_timer_read,
+ .mask = CLOCKSOURCE_MASK(32),
+ .flags = CLOCK_SOURCE_IS_CONTINUOUS,
+ },
+};
+
+cycles_t get_cycles(void)
+{
+ return nios2_timer_read(&nios2_cs.cs);
+}
+
+static void nios2_timer_start(struct nios2_timer *timer)
+{
+ u16 ctrl;
+
+ ctrl = timer_readw(timer, ALTERA_TIMER_CONTROL_REG);
+ ctrl |= ALTERA_TIMER_CONTROL_START_MSK;
+ timer_writew(timer, ctrl, ALTERA_TIMER_CONTROL_REG);
+}
+
+static void nios2_timer_stop(struct nios2_timer *timer)
+{
+ u16 ctrl;
+
+ ctrl = timer_readw(timer, ALTERA_TIMER_CONTROL_REG);
+ ctrl |= ALTERA_TIMER_CONTROL_STOP_MSK;
+ timer_writew(timer, ctrl, ALTERA_TIMER_CONTROL_REG);
+}
+
+static void nios2_timer_config(struct nios2_timer *timer, unsigned long period,
+ enum clock_event_mode mode)
+{
+ u16 ctrl;
+
+ /* The timer's actual period is one cycle greater than the value
+ * stored in the period register. */
+ period--;
+
+ ctrl = timer_readw(timer, ALTERA_TIMER_CONTROL_REG);
+ /* stop counter */
+ timer_writew(timer, ctrl | ALTERA_TIMER_CONTROL_STOP_MSK,
+ ALTERA_TIMER_CONTROL_REG);
+
+ /* write new count */
+ timer_writew(timer, period, ALTERA_TIMER_PERIODL_REG);
+ timer_writew(timer, period >> 16, ALTERA_TIMER_PERIODH_REG);
+
+ ctrl |= ALTERA_TIMER_CONTROL_START_MSK | ALTERA_TIMER_CONTROL_ITO_MSK;
+ if (mode == CLOCK_EVT_MODE_PERIODIC)
+ ctrl |= ALTERA_TIMER_CONTROL_CONT_MSK;
+ else
+ ctrl &= ~ALTERA_TIMER_CONTROL_CONT_MSK;
+ timer_writew(timer, ctrl, ALTERA_TIMER_CONTROL_REG);
+}
+
+static int nios2_timer_set_next_event(unsigned long delta,
+ struct clock_event_device *evt)
+{
+ struct nios2_clockevent_dev *nios2_ced = to_nios2_clkevent(evt);
+
+ nios2_timer_config(&nios2_ced->timer, delta, evt->mode);
+
+ return 0;
+}
+
+static void nios2_timer_set_mode(enum clock_event_mode mode,
+ struct clock_event_device *evt)
+{
+ unsigned long period;
+ struct nios2_clockevent_dev *nios2_ced = to_nios2_clkevent(evt);
+ struct nios2_timer *timer = &nios2_ced->timer;
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ period = DIV_ROUND_UP(timer->freq, HZ);
+ nios2_timer_config(timer, period, CLOCK_EVT_MODE_PERIODIC);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ nios2_timer_stop(timer);
+ break;
+ case CLOCK_EVT_MODE_RESUME:
+ nios2_timer_start(timer);
+ break;
+ }
+}
+
+irqreturn_t timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = (struct clock_event_device *) dev_id;
+ struct nios2_clockevent_dev *nios2_ced = to_nios2_clkevent(evt);
+
+ /* Clear the interrupt condition */
+ timer_writew(&nios2_ced->timer, 0, ALTERA_TIMER_STATUS_REG);
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static void __init nios2_timer_get_base_and_freq(struct device_node *np,
+ void __iomem **base, u32 *freq)
+{
+ *base = of_iomap(np, 0);
+ if (!*base)
+ panic("Unable to map reg for %s\n", np->name);
+
+ if (of_property_read_u32(np, "clock-frequency", freq))
+ panic("Unable to get %s clock frequency\n", np->name);
+}
+
+static struct nios2_clockevent_dev nios2_ce = {
+ .ced = {
+ .name = "nios2-clkevent",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .rating = 250,
+ .shift = 32,
+ .set_next_event = nios2_timer_set_next_event,
+ .set_mode = nios2_timer_set_mode,
+ },
+};
+
+static __init void nios2_clockevent_init(struct device_node *timer)
+{
+ void __iomem *iobase;
+ u32 freq;
+ int irq;
+
+ nios2_timer_get_base_and_freq(timer, &iobase, &freq);
+
+ irq = irq_of_parse_and_map(timer, 0);
+ if (!irq)
+ panic("Unable to parse timer irq\n");
+
+ nios2_ce.timer.base = iobase;
+ nios2_ce.timer.freq = freq;
+
+ nios2_ce.ced.cpumask = cpumask_of(0);
+ nios2_ce.ced.irq = irq;
+
+ nios2_timer_stop(&nios2_ce.timer);
+ /* clear pending interrupt */
+ timer_writew(&nios2_ce.timer, 0, ALTERA_TIMER_STATUS_REG);
+
+ if (request_irq(irq, timer_interrupt, IRQF_TIMER, timer->name,
+ &nios2_ce.ced))
+ panic("Unable to setup timer irq\n");
+
+ clockevents_config_and_register(&nios2_ce.ced, freq, 1, ULONG_MAX);
+}
+
+static __init void nios2_clocksource_init(struct device_node *timer)
+{
+ unsigned int ctrl;
+ void __iomem *iobase;
+ u32 freq;
+
+ nios2_timer_get_base_and_freq(timer, &iobase, &freq);
+
+ nios2_cs.timer.base = iobase;
+ nios2_cs.timer.freq = freq;
+
+ clocksource_register_hz(&nios2_cs.cs, freq);
+
+ timer_writew(&nios2_cs.timer, USHRT_MAX, ALTERA_TIMER_PERIODL_REG);
+ timer_writew(&nios2_cs.timer, USHRT_MAX, ALTERA_TIMER_PERIODH_REG);
+
+ /* interrupt disable + continuous + start */
+ ctrl = ALTERA_TIMER_CONTROL_CONT_MSK | ALTERA_TIMER_CONTROL_START_MSK;
+ timer_writew(&nios2_cs.timer, ctrl, ALTERA_TIMER_CONTROL_REG);
+
+ /* Calibrate the delay loop directly */
+ lpj_fine = freq / HZ;
+}
+
+/*
+ * The first timer instance will use as a clockevent. If there are two or
+ * more instances, the second one gets used as clocksource and all
+ * others are unused.
+*/
+static void __init nios2_time_init(struct device_node *timer)
+{
+ static int num_called;
+
+ switch (num_called) {
+ case 0:
+ nios2_clockevent_init(timer);
+ break;
+ case 1:
+ nios2_clocksource_init(timer);
+ break;
+ default:
+ break;
+ }
+
+ num_called++;
+}
+
+void read_persistent_clock(struct timespec *ts)
+{
+ ts->tv_sec = mktime(2007, 1, 1, 0, 0, 0);
+ ts->tv_nsec = 0;
+}
+
+void __init time_init(void)
+{
+ clocksource_of_init();
+}
+
+CLOCKSOURCE_OF_DECLARE(nios2_timer, "altr,timer-1.0", nios2_time_init);
--- /dev/null
+/*
+ * Hardware exception handling
+ *
+ * Copyright (C) 2010 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2004 Microtronix Datacom Ltd.
+ * Copyright (C) 2001 Vic Phillips
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/signal.h>
+#include <linux/export.h>
+#include <linux/mm.h>
+#include <linux/ptrace.h>
+
+#include <asm/traps.h>
+#include <asm/sections.h>
+#include <asm/uaccess.h>
+
+static DEFINE_SPINLOCK(die_lock);
+
+void die(const char *str, struct pt_regs *regs, long err)
+{
+ console_verbose();
+ spin_lock_irq(&die_lock);
+ pr_warn("Oops: %s, sig: %ld\n", str, err);
+ show_regs(regs);
+ spin_unlock_irq(&die_lock);
+ /*
+ * do_exit() should take care of panic'ing from an interrupt
+ * context so we don't handle it here
+ */
+ do_exit(err);
+}
+
+void _exception(int signo, struct pt_regs *regs, int code, unsigned long addr)
+{
+ siginfo_t info;
+
+ if (!user_mode(regs))
+ die("Exception in kernel mode", regs, signo);
+
+ info.si_signo = signo;
+ info.si_errno = 0;
+ info.si_code = code;
+ info.si_addr = (void __user *) addr;
+ force_sig_info(signo, &info, current);
+}
+
+/*
+ * The show_stack is an external API which we do not use ourselves.
+ */
+
+int kstack_depth_to_print = 48;
+
+void show_stack(struct task_struct *task, unsigned long *stack)
+{
+ unsigned long *endstack, addr;
+ int i;
+
+ if (!stack) {
+ if (task)
+ stack = (unsigned long *)task->thread.ksp;
+ else
+ stack = (unsigned long *)&stack;
+ }
+
+ addr = (unsigned long) stack;
+ endstack = (unsigned long *) PAGE_ALIGN(addr);
+
+ pr_emerg("Stack from %08lx:", (unsigned long)stack);
+ for (i = 0; i < kstack_depth_to_print; i++) {
+ if (stack + 1 > endstack)
+ break;
+ if (i % 8 == 0)
+ pr_emerg("\n ");
+ pr_emerg(" %08lx", *stack++);
+ }
+
+ pr_emerg("\nCall Trace:");
+ i = 0;
+ while (stack + 1 <= endstack) {
+ addr = *stack++;
+ /*
+ * If the address is either in the text segment of the
+ * kernel, or in the region which contains vmalloc'ed
+ * memory, it *may* be the address of a calling
+ * routine; if so, print it so that someone tracing
+ * down the cause of the crash will be able to figure
+ * out the call path that was taken.
+ */
+ if (((addr >= (unsigned long) _stext) &&
+ (addr <= (unsigned long) _etext))) {
+ if (i % 4 == 0)
+ pr_emerg("\n ");
+ pr_emerg(" [<%08lx>]", addr);
+ i++;
+ }
+ }
+ pr_emerg("\n");
+}
+
+void __init trap_init(void)
+{
+ /* Nothing to do here */
+}
+
+/* Breakpoint handler */
+asmlinkage void breakpoint_c(struct pt_regs *fp)
+{
+ /*
+ * The breakpoint entry code has moved the PC on by 4 bytes, so we must
+ * move it back. This could be done on the host but we do it here
+ * because monitor.S of JTAG gdbserver does it too.
+ */
+ fp->ea -= 4;
+ _exception(SIGTRAP, fp, TRAP_BRKPT, fp->ea);
+}
+
+#ifndef CONFIG_NIOS2_ALIGNMENT_TRAP
+/* Alignment exception handler */
+asmlinkage void handle_unaligned_c(struct pt_regs *fp, int cause)
+{
+ unsigned long addr = RDCTL(CTL_BADADDR);
+
+ cause >>= 2;
+ fp->ea -= 4;
+
+ if (fixup_exception(fp))
+ return;
+
+ if (!user_mode(fp)) {
+ pr_alert("Unaligned access from kernel mode, this might be a hardware\n");
+ pr_alert("problem, dump registers and restart the instruction\n");
+ pr_alert(" BADADDR 0x%08lx\n", addr);
+ pr_alert(" cause %d\n", cause);
+ pr_alert(" op-code 0x%08lx\n", *(unsigned long *)(fp->ea));
+ show_regs(fp);
+ return;
+ }
+
+ _exception(SIGBUS, fp, BUS_ADRALN, addr);
+}
+#endif /* CONFIG_NIOS2_ALIGNMENT_TRAP */
+
+/* Illegal instruction handler */
+asmlinkage void handle_illegal_c(struct pt_regs *fp)
+{
+ fp->ea -= 4;
+ _exception(SIGILL, fp, ILL_ILLOPC, fp->ea);
+}
+
+/* Supervisor instruction handler */
+asmlinkage void handle_supervisor_instr(struct pt_regs *fp)
+{
+ fp->ea -= 4;
+ _exception(SIGILL, fp, ILL_PRVOPC, fp->ea);
+}
+
+/* Division error handler */
+asmlinkage void handle_diverror_c(struct pt_regs *fp)
+{
+ fp->ea -= 4;
+ _exception(SIGFPE, fp, FPE_INTDIV, fp->ea);
+}
+
+/* Unhandled exception handler */
+asmlinkage void unhandled_exception(struct pt_regs *regs, int cause)
+{
+ unsigned long addr = RDCTL(CTL_BADADDR);
+
+ cause /= 4;
+
+ pr_emerg("Unhandled exception #%d in %s mode (badaddr=0x%08lx)\n",
+ cause, user_mode(regs) ? "user" : "kernel", addr);
+
+ regs->ea -= 4;
+ show_regs(regs);
+
+ pr_emerg("opcode: 0x%08lx\n", *(unsigned long *)(regs->ea));
+}
--- /dev/null
+/*
+ * Copyright (C) 2009 Thomas Chou <thomas@wytron.com.tw>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+#include <asm/page.h>
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/cache.h>
+#include <asm/thread_info.h>
+
+OUTPUT_FORMAT("elf32-littlenios2", "elf32-littlenios2", "elf32-littlenios2")
+
+OUTPUT_ARCH(nios)
+ENTRY(_start) /* Defined in head.S */
+
+jiffies = jiffies_64;
+
+SECTIONS
+{
+ . = CONFIG_NIOS2_MEM_BASE | CONFIG_NIOS2_KERNEL_REGION_BASE;
+
+ _text = .;
+ _stext = .;
+ HEAD_TEXT_SECTION
+ .text : {
+ TEXT_TEXT
+ SCHED_TEXT
+ LOCK_TEXT
+ IRQENTRY_TEXT
+ KPROBES_TEXT
+ } =0
+ _etext = .;
+
+ .got : {
+ *(.got.plt)
+ *(.igot.plt)
+ *(.got)
+ *(.igot)
+ }
+
+ EXCEPTION_TABLE(L1_CACHE_BYTES)
+
+ . = ALIGN(PAGE_SIZE);
+ __init_begin = .;
+ INIT_TEXT_SECTION(PAGE_SIZE)
+ INIT_DATA_SECTION(PAGE_SIZE)
+ PERCPU_SECTION(L1_CACHE_BYTES)
+ __init_end = .;
+
+ _sdata = .;
+ RO_DATA_SECTION(PAGE_SIZE)
+ RW_DATA_SECTION(L1_CACHE_BYTES, PAGE_SIZE, THREAD_SIZE)
+ _edata = .;
+
+ BSS_SECTION(0, 0, 0)
+ _end = .;
+
+ STABS_DEBUG
+ DWARF_DEBUG
+ NOTES
+
+ DISCARDS
+}
--- /dev/null
+#
+# Makefile for Nios2-specific library files.
+#
+
+lib-y += delay.o
+lib-y += memcpy.o
+lib-y += memmove.o
+lib-y += memset.o
--- /dev/null
+/* Copyright Altera Corporation (C) 2014. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2,
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#include <linux/module.h>
+#include <asm/delay.h>
+#include <asm/param.h>
+#include <asm/processor.h>
+#include <asm/timex.h>
+
+void __delay(unsigned long cycles)
+{
+ cycles_t start = get_cycles();
+
+ while ((get_cycles() - start) < cycles)
+ cpu_relax();
+}
+EXPORT_SYMBOL(__delay);
+
+void __const_udelay(unsigned long xloops)
+{
+ u64 loops;
+
+ loops = (u64)xloops * loops_per_jiffy * HZ;
+
+ __delay(loops >> 32);
+}
+EXPORT_SYMBOL(__const_udelay);
+
+void __udelay(unsigned long usecs)
+{
+ __const_udelay(usecs * 0x10C7UL); /* 2**32 / 1000000 (rounded up) */
+}
+EXPORT_SYMBOL(__udelay);
+
+void __ndelay(unsigned long nsecs)
+{
+ __const_udelay(nsecs * 0x5UL); /* 2**32 / 1000000000 (rounded up) */
+}
+EXPORT_SYMBOL(__ndelay);
--- /dev/null
+/* Extracted from GLIBC memcpy.c and memcopy.h, which is:
+ Copyright (C) 1991, 1992, 1993, 1997, 2004 Free Software Foundation, Inc.
+ This file is part of the GNU C Library.
+ Contributed by Torbjorn Granlund (tege@sics.se).
+
+ The GNU C Library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ The GNU C Library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General Public
+ License along with the GNU C Library; if not, see
+ <http://www.gnu.org/licenses/>. */
+
+#include <linux/types.h>
+
+/* Type to use for aligned memory operations.
+ This should normally be the biggest type supported by a single load
+ and store. */
+#define op_t unsigned long int
+#define OPSIZ (sizeof(op_t))
+
+/* Optimal type for storing bytes in registers. */
+#define reg_char char
+
+#define MERGE(w0, sh_1, w1, sh_2) (((w0) >> (sh_1)) | ((w1) << (sh_2)))
+
+/* Copy exactly NBYTES bytes from SRC_BP to DST_BP,
+ without any assumptions about alignment of the pointers. */
+#define BYTE_COPY_FWD(dst_bp, src_bp, nbytes) \
+do { \
+ size_t __nbytes = (nbytes); \
+ while (__nbytes > 0) { \
+ unsigned char __x = ((unsigned char *) src_bp)[0]; \
+ src_bp += 1; \
+ __nbytes -= 1; \
+ ((unsigned char *) dst_bp)[0] = __x; \
+ dst_bp += 1; \
+ } \
+} while (0)
+
+/* Copy *up to* NBYTES bytes from SRC_BP to DST_BP, with
+ the assumption that DST_BP is aligned on an OPSIZ multiple. If
+ not all bytes could be easily copied, store remaining number of bytes
+ in NBYTES_LEFT, otherwise store 0. */
+/* extern void _wordcopy_fwd_aligned __P ((long int, long int, size_t)); */
+/* extern void _wordcopy_fwd_dest_aligned __P ((long int, long int, size_t)); */
+#define WORD_COPY_FWD(dst_bp, src_bp, nbytes_left, nbytes) \
+do { \
+ if (src_bp % OPSIZ == 0) \
+ _wordcopy_fwd_aligned(dst_bp, src_bp, (nbytes) / OPSIZ);\
+ else \
+ _wordcopy_fwd_dest_aligned(dst_bp, src_bp, (nbytes) / OPSIZ);\
+ src_bp += (nbytes) & -OPSIZ; \
+ dst_bp += (nbytes) & -OPSIZ; \
+ (nbytes_left) = (nbytes) % OPSIZ; \
+} while (0)
+
+
+/* Threshold value for when to enter the unrolled loops. */
+#define OP_T_THRES 16
+
+/* _wordcopy_fwd_aligned -- Copy block beginning at SRCP to
+ block beginning at DSTP with LEN `op_t' words (not LEN bytes!).
+ Both SRCP and DSTP should be aligned for memory operations on `op_t's. */
+/* stream-lined (read x8 + write x8) */
+static void _wordcopy_fwd_aligned(long int dstp, long int srcp, size_t len)
+{
+ while (len > 7) {
+ register op_t a0, a1, a2, a3, a4, a5, a6, a7;
+
+ a0 = ((op_t *) srcp)[0];
+ a1 = ((op_t *) srcp)[1];
+ a2 = ((op_t *) srcp)[2];
+ a3 = ((op_t *) srcp)[3];
+ a4 = ((op_t *) srcp)[4];
+ a5 = ((op_t *) srcp)[5];
+ a6 = ((op_t *) srcp)[6];
+ a7 = ((op_t *) srcp)[7];
+ ((op_t *) dstp)[0] = a0;
+ ((op_t *) dstp)[1] = a1;
+ ((op_t *) dstp)[2] = a2;
+ ((op_t *) dstp)[3] = a3;
+ ((op_t *) dstp)[4] = a4;
+ ((op_t *) dstp)[5] = a5;
+ ((op_t *) dstp)[6] = a6;
+ ((op_t *) dstp)[7] = a7;
+
+ srcp += 8 * OPSIZ;
+ dstp += 8 * OPSIZ;
+ len -= 8;
+ }
+ while (len > 0) {
+ *(op_t *)dstp = *(op_t *)srcp;
+
+ srcp += OPSIZ;
+ dstp += OPSIZ;
+ len -= 1;
+ }
+}
+
+/* _wordcopy_fwd_dest_aligned -- Copy block beginning at SRCP to
+ block beginning at DSTP with LEN `op_t' words (not LEN bytes!).
+ DSTP should be aligned for memory operations on `op_t's, but SRCP must
+ *not* be aligned. */
+/* stream-lined (read x4 + write x4) */
+static void _wordcopy_fwd_dest_aligned(long int dstp, long int srcp,
+ size_t len)
+{
+ op_t ap;
+ int sh_1, sh_2;
+
+ /* Calculate how to shift a word read at the memory operation
+ aligned srcp to make it aligned for copy. */
+
+ sh_1 = 8 * (srcp % OPSIZ);
+ sh_2 = 8 * OPSIZ - sh_1;
+
+ /* Make SRCP aligned by rounding it down to the beginning of the `op_t'
+ it points in the middle of. */
+ srcp &= -OPSIZ;
+ ap = ((op_t *) srcp)[0];
+ srcp += OPSIZ;
+
+ while (len > 3) {
+ op_t a0, a1, a2, a3;
+
+ a0 = ((op_t *) srcp)[0];
+ a1 = ((op_t *) srcp)[1];
+ a2 = ((op_t *) srcp)[2];
+ a3 = ((op_t *) srcp)[3];
+ ((op_t *) dstp)[0] = MERGE(ap, sh_1, a0, sh_2);
+ ((op_t *) dstp)[1] = MERGE(a0, sh_1, a1, sh_2);
+ ((op_t *) dstp)[2] = MERGE(a1, sh_1, a2, sh_2);
+ ((op_t *) dstp)[3] = MERGE(a2, sh_1, a3, sh_2);
+
+ ap = a3;
+ srcp += 4 * OPSIZ;
+ dstp += 4 * OPSIZ;
+ len -= 4;
+ }
+ while (len > 0) {
+ register op_t a0;
+
+ a0 = ((op_t *) srcp)[0];
+ ((op_t *) dstp)[0] = MERGE(ap, sh_1, a0, sh_2);
+
+ ap = a0;
+ srcp += OPSIZ;
+ dstp += OPSIZ;
+ len -= 1;
+ }
+}
+
+void *memcpy(void *dstpp, const void *srcpp, size_t len)
+{
+ unsigned long int dstp = (long int) dstpp;
+ unsigned long int srcp = (long int) srcpp;
+
+ /* Copy from the beginning to the end. */
+
+ /* If there not too few bytes to copy, use word copy. */
+ if (len >= OP_T_THRES) {
+ /* Copy just a few bytes to make DSTP aligned. */
+ len -= (-dstp) % OPSIZ;
+ BYTE_COPY_FWD(dstp, srcp, (-dstp) % OPSIZ);
+
+ /* Copy whole pages from SRCP to DSTP by virtual address
+ manipulation, as much as possible. */
+
+ /* PAGE_COPY_FWD_MAYBE (dstp, srcp, len, len); */
+
+ /* Copy from SRCP to DSTP taking advantage of the known
+ alignment of DSTP. Number of bytes remaining is put in the
+ third argument, i.e. in LEN. This number may vary from
+ machine to machine. */
+
+ WORD_COPY_FWD(dstp, srcp, len, len);
+
+ /* Fall out and copy the tail. */
+ }
+
+ /* There are just a few bytes to copy. Use byte memory operations. */
+ BYTE_COPY_FWD(dstp, srcp, len);
+
+ return dstpp;
+}
+
+void *memcpyb(void *dstpp, const void *srcpp, unsigned len)
+{
+ unsigned long int dstp = (long int) dstpp;
+ unsigned long int srcp = (long int) srcpp;
+
+ BYTE_COPY_FWD(dstp, srcp, len);
+
+ return dstpp;
+}
--- /dev/null
+/*
+ * Copyright (C) 2011 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2004 Microtronix Datacom Ltd
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/string.h>
+
+#ifdef __HAVE_ARCH_MEMMOVE
+void *memmove(void *d, const void *s, size_t count)
+{
+ unsigned long dst, src;
+
+ if (!count)
+ return d;
+
+ if (d < s) {
+ dst = (unsigned long) d;
+ src = (unsigned long) s;
+
+ if ((count < 8) || ((dst ^ src) & 3))
+ goto restup;
+
+ if (dst & 1) {
+ *(char *)dst++ = *(char *)src++;
+ count--;
+ }
+ if (dst & 2) {
+ *(short *)dst = *(short *)src;
+ src += 2;
+ dst += 2;
+ count -= 2;
+ }
+ while (count > 3) {
+ *(long *)dst = *(long *)src;
+ src += 4;
+ dst += 4;
+ count -= 4;
+ }
+restup:
+ while (count--)
+ *(char *)dst++ = *(char *)src++;
+ } else {
+ dst = (unsigned long) d + count;
+ src = (unsigned long) s + count;
+
+ if ((count < 8) || ((dst ^ src) & 3))
+ goto restdown;
+
+ if (dst & 1) {
+ src--;
+ dst--;
+ count--;
+ *(char *)dst = *(char *)src;
+ }
+ if (dst & 2) {
+ src -= 2;
+ dst -= 2;
+ count -= 2;
+ *(short *)dst = *(short *)src;
+ }
+ while (count > 3) {
+ src -= 4;
+ dst -= 4;
+ count -= 4;
+ *(long *)dst = *(long *)src;
+ }
+restdown:
+ while (count--) {
+ src--;
+ dst--;
+ *(char *)dst = *(char *)src;
+ }
+ }
+
+ return d;
+}
+#endif /* __HAVE_ARCH_MEMMOVE */
--- /dev/null
+/*
+ * Copyright (C) 2011 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2004 Microtronix Datacom Ltd
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/string.h>
+
+#ifdef __HAVE_ARCH_MEMSET
+void *memset(void *s, int c, size_t count)
+{
+ int destptr, charcnt, dwordcnt, fill8reg, wrkrega;
+
+ if (!count)
+ return s;
+
+ c &= 0xFF;
+
+ if (count <= 8) {
+ char *xs = (char *) s;
+
+ while (count--)
+ *xs++ = c;
+ return s;
+ }
+
+ __asm__ __volatile__ (
+ /* fill8 %3, %5 (c & 0xff) */
+ " slli %4, %5, 8\n"
+ " or %4, %4, %5\n"
+ " slli %3, %4, 16\n"
+ " or %3, %3, %4\n"
+ /* Word-align %0 (s) if necessary */
+ " andi %4, %0, 0x01\n"
+ " beq %4, zero, 1f\n"
+ " addi %1, %1, -1\n"
+ " stb %3, 0(%0)\n"
+ " addi %0, %0, 1\n"
+ "1: mov %2, %1\n"
+ /* Dword-align %0 (s) if necessary */
+ " andi %4, %0, 0x02\n"
+ " beq %4, zero, 2f\n"
+ " addi %1, %1, -2\n"
+ " sth %3, 0(%0)\n"
+ " addi %0, %0, 2\n"
+ " mov %2, %1\n"
+ /* %1 and %2 are how many more bytes to set */
+ "2: srli %2, %2, 2\n"
+ /* %2 is how many dwords to set */
+ "3: stw %3, 0(%0)\n"
+ " addi %0, %0, 4\n"
+ " addi %2, %2, -1\n"
+ " bne %2, zero, 3b\n"
+ /* store residual word and/or byte if necessary */
+ " andi %4, %1, 0x02\n"
+ " beq %4, zero, 4f\n"
+ " sth %3, 0(%0)\n"
+ " addi %0, %0, 2\n"
+ /* store residual byte if necessary */
+ "4: andi %4, %1, 0x01\n"
+ " beq %4, zero, 5f\n"
+ " stb %3, 0(%0)\n"
+ "5:\n"
+ : "=r" (destptr), /* %0 Output */
+ "=r" (charcnt), /* %1 Output */
+ "=r" (dwordcnt), /* %2 Output */
+ "=r" (fill8reg), /* %3 Output */
+ "=r" (wrkrega) /* %4 Output */
+ : "r" (c), /* %5 Input */
+ "0" (s), /* %0 Input/Output */
+ "1" (count) /* %1 Input/Output */
+ : "memory" /* clobbered */
+ );
+
+ return s;
+}
+#endif /* __HAVE_ARCH_MEMSET */
--- /dev/null
+#
+# Makefile for the Nios2-specific parts of the memory manager.
+#
+
+obj-y += cacheflush.o
+obj-y += dma-mapping.o
+obj-y += extable.o
+obj-y += fault.o
+obj-y += init.o
+obj-y += ioremap.o
+obj-y += mmu_context.o
+obj-y += pgtable.o
+obj-y += tlb.o
+obj-y += uaccess.o
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009, Wind River Systems Inc
+ * Implemented by fredrik.markstrom@gmail.com and ivarholmqvist@gmail.com
+ */
+
+#include <linux/export.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/fs.h>
+
+#include <asm/cacheflush.h>
+#include <asm/cpuinfo.h>
+
+static void __flush_dcache(unsigned long start, unsigned long end)
+{
+ unsigned long addr;
+
+ start &= ~(cpuinfo.dcache_line_size - 1);
+ end += (cpuinfo.dcache_line_size - 1);
+ end &= ~(cpuinfo.dcache_line_size - 1);
+
+ if (end > start + cpuinfo.dcache_size)
+ end = start + cpuinfo.dcache_size;
+
+ for (addr = start; addr < end; addr += cpuinfo.dcache_line_size) {
+ __asm__ __volatile__ (" flushda 0(%0)\n"
+ : /* Outputs */
+ : /* Inputs */ "r"(addr)
+ /* : No clobber */);
+ }
+}
+
+static void __flush_dcache_all(unsigned long start, unsigned long end)
+{
+ unsigned long addr;
+
+ start &= ~(cpuinfo.dcache_line_size - 1);
+ end += (cpuinfo.dcache_line_size - 1);
+ end &= ~(cpuinfo.dcache_line_size - 1);
+
+ if (end > start + cpuinfo.dcache_size)
+ end = start + cpuinfo.dcache_size;
+
+ for (addr = start; addr < end; addr += cpuinfo.dcache_line_size) {
+ __asm__ __volatile__ (" flushd 0(%0)\n"
+ : /* Outputs */
+ : /* Inputs */ "r"(addr)
+ /* : No clobber */);
+ }
+}
+
+static void __invalidate_dcache(unsigned long start, unsigned long end)
+{
+ unsigned long addr;
+
+ start &= ~(cpuinfo.dcache_line_size - 1);
+ end += (cpuinfo.dcache_line_size - 1);
+ end &= ~(cpuinfo.dcache_line_size - 1);
+
+ if (end > start + cpuinfo.dcache_size)
+ end = start + cpuinfo.dcache_size;
+
+ for (addr = start; addr < end; addr += cpuinfo.dcache_line_size) {
+ __asm__ __volatile__ (" initda 0(%0)\n"
+ : /* Outputs */
+ : /* Inputs */ "r"(addr)
+ /* : No clobber */);
+ }
+}
+
+static void __flush_icache(unsigned long start, unsigned long end)
+{
+ unsigned long addr;
+
+ start &= ~(cpuinfo.icache_line_size - 1);
+ end += (cpuinfo.icache_line_size - 1);
+ end &= ~(cpuinfo.icache_line_size - 1);
+
+ if (end > start + cpuinfo.icache_size)
+ end = start + cpuinfo.icache_size;
+
+ for (addr = start; addr < end; addr += cpuinfo.icache_line_size) {
+ __asm__ __volatile__ (" flushi %0\n"
+ : /* Outputs */
+ : /* Inputs */ "r"(addr)
+ /* : No clobber */);
+ }
+ __asm__ __volatile(" flushp\n");
+}
+
+static void flush_aliases(struct address_space *mapping, struct page *page)
+{
+ struct mm_struct *mm = current->active_mm;
+ struct vm_area_struct *mpnt;
+ pgoff_t pgoff;
+
+ pgoff = page->index;
+
+ flush_dcache_mmap_lock(mapping);
+ vma_interval_tree_foreach(mpnt, &mapping->i_mmap, pgoff, pgoff) {
+ unsigned long offset;
+
+ if (mpnt->vm_mm != mm)
+ continue;
+ if (!(mpnt->vm_flags & VM_MAYSHARE))
+ continue;
+
+ offset = (pgoff - mpnt->vm_pgoff) << PAGE_SHIFT;
+ flush_cache_page(mpnt, mpnt->vm_start + offset,
+ page_to_pfn(page));
+ }
+ flush_dcache_mmap_unlock(mapping);
+}
+
+void flush_cache_all(void)
+{
+ __flush_dcache_all(0, cpuinfo.dcache_size);
+ __flush_icache(0, cpuinfo.icache_size);
+}
+
+void flush_cache_mm(struct mm_struct *mm)
+{
+ flush_cache_all();
+}
+
+void flush_cache_dup_mm(struct mm_struct *mm)
+{
+ flush_cache_all();
+}
+
+void flush_icache_range(unsigned long start, unsigned long end)
+{
+ __flush_icache(start, end);
+}
+
+void flush_dcache_range(unsigned long start, unsigned long end)
+{
+ __flush_dcache(start, end);
+}
+EXPORT_SYMBOL(flush_dcache_range);
+
+void invalidate_dcache_range(unsigned long start, unsigned long end)
+{
+ __invalidate_dcache(start, end);
+}
+EXPORT_SYMBOL(invalidate_dcache_range);
+
+void flush_cache_range(struct vm_area_struct *vma, unsigned long start,
+ unsigned long end)
+{
+ __flush_dcache(start, end);
+ if (vma == NULL || (vma->vm_flags & VM_EXEC))
+ __flush_icache(start, end);
+}
+
+void flush_icache_page(struct vm_area_struct *vma, struct page *page)
+{
+ unsigned long start = (unsigned long) page_address(page);
+ unsigned long end = start + PAGE_SIZE;
+
+ __flush_icache(start, end);
+}
+
+void flush_cache_page(struct vm_area_struct *vma, unsigned long vmaddr,
+ unsigned long pfn)
+{
+ unsigned long start = vmaddr;
+ unsigned long end = start + PAGE_SIZE;
+
+ __flush_dcache(start, end);
+ if (vma->vm_flags & VM_EXEC)
+ __flush_icache(start, end);
+}
+
+void flush_dcache_page(struct page *page)
+{
+ struct address_space *mapping;
+
+ /*
+ * The zero page is never written to, so never has any dirty
+ * cache lines, and therefore never needs to be flushed.
+ */
+ if (page == ZERO_PAGE(0))
+ return;
+
+ mapping = page_mapping(page);
+
+ /* Flush this page if there are aliases. */
+ if (mapping && !mapping_mapped(mapping)) {
+ clear_bit(PG_dcache_clean, &page->flags);
+ } else {
+ unsigned long start = (unsigned long)page_address(page);
+
+ __flush_dcache_all(start, start + PAGE_SIZE);
+ if (mapping)
+ flush_aliases(mapping, page);
+ set_bit(PG_dcache_clean, &page->flags);
+ }
+}
+EXPORT_SYMBOL(flush_dcache_page);
+
+void update_mmu_cache(struct vm_area_struct *vma,
+ unsigned long address, pte_t *pte)
+{
+ unsigned long pfn = pte_pfn(*pte);
+ struct page *page;
+
+ if (!pfn_valid(pfn))
+ return;
+
+ /*
+ * The zero page is never written to, so never has any dirty
+ * cache lines, and therefore never needs to be flushed.
+ */
+ page = pfn_to_page(pfn);
+ if (page == ZERO_PAGE(0))
+ return;
+
+ if (!PageReserved(page) &&
+ !test_and_set_bit(PG_dcache_clean, &page->flags)) {
+ unsigned long start = page_to_virt(page);
+ struct address_space *mapping;
+
+ __flush_dcache(start, start + PAGE_SIZE);
+
+ mapping = page_mapping(page);
+ if (mapping)
+ flush_aliases(mapping, page);
+ }
+}
+
+void copy_user_page(void *vto, void *vfrom, unsigned long vaddr,
+ struct page *to)
+{
+ __flush_dcache(vaddr, vaddr + PAGE_SIZE);
+ copy_page(vto, vfrom);
+ __flush_dcache((unsigned long)vto, (unsigned long)vto + PAGE_SIZE);
+}
+
+void clear_user_page(void *addr, unsigned long vaddr, struct page *page)
+{
+ __flush_dcache(vaddr, vaddr + PAGE_SIZE);
+ clear_page(addr);
+ __flush_dcache((unsigned long)addr, (unsigned long)addr + PAGE_SIZE);
+}
+
+void copy_from_user_page(struct vm_area_struct *vma, struct page *page,
+ unsigned long user_vaddr,
+ void *dst, void *src, int len)
+{
+ flush_cache_page(vma, user_vaddr, page_to_pfn(page));
+ memcpy(dst, src, len);
+ __flush_dcache((unsigned long)src, (unsigned long)src + len);
+ if (vma->vm_flags & VM_EXEC)
+ __flush_icache((unsigned long)src, (unsigned long)src + len);
+}
+
+void copy_to_user_page(struct vm_area_struct *vma, struct page *page,
+ unsigned long user_vaddr,
+ void *dst, void *src, int len)
+{
+ flush_cache_page(vma, user_vaddr, page_to_pfn(page));
+ memcpy(dst, src, len);
+ __flush_dcache((unsigned long)dst, (unsigned long)dst + len);
+ if (vma->vm_flags & VM_EXEC)
+ __flush_icache((unsigned long)dst, (unsigned long)dst + len);
+}
--- /dev/null
+/*
+ * Copyright (C) 2011 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2009 Wind River Systems Inc
+ * Implemented by fredrik.markstrom@gmail.com and ivarholmqvist@gmail.com
+ *
+ * Based on DMA code from MIPS.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/export.h>
+#include <linux/string.h>
+#include <linux/scatterlist.h>
+#include <linux/dma-mapping.h>
+#include <linux/io.h>
+#include <linux/cache.h>
+#include <asm/cacheflush.h>
+
+
+void *dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *dma_handle, gfp_t gfp)
+{
+ void *ret;
+
+ /* ignore region specifiers */
+ gfp &= ~(__GFP_DMA | __GFP_HIGHMEM);
+
+ /* optimized page clearing */
+ gfp |= __GFP_ZERO;
+
+ if (dev == NULL || (dev->coherent_dma_mask < 0xffffffff))
+ gfp |= GFP_DMA;
+
+ ret = (void *) __get_free_pages(gfp, get_order(size));
+ if (ret != NULL) {
+ *dma_handle = virt_to_phys(ret);
+ flush_dcache_range((unsigned long) ret,
+ (unsigned long) ret + size);
+ ret = UNCAC_ADDR(ret);
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(dma_alloc_coherent);
+
+void dma_free_coherent(struct device *dev, size_t size, void *vaddr,
+ dma_addr_t dma_handle)
+{
+ unsigned long addr = (unsigned long) CAC_ADDR((unsigned long) vaddr);
+
+ free_pages(addr, get_order(size));
+}
+EXPORT_SYMBOL(dma_free_coherent);
+
+int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
+ enum dma_data_direction direction)
+{
+ int i;
+
+ BUG_ON(!valid_dma_direction(direction));
+
+ for_each_sg(sg, sg, nents, i) {
+ void *addr;
+
+ addr = sg_virt(sg);
+ if (addr) {
+ __dma_sync_for_device(addr, sg->length, direction);
+ sg->dma_address = sg_phys(sg);
+ }
+ }
+
+ return nents;
+}
+EXPORT_SYMBOL(dma_map_sg);
+
+dma_addr_t dma_map_page(struct device *dev, struct page *page,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ void *addr;
+
+ BUG_ON(!valid_dma_direction(direction));
+
+ addr = page_address(page) + offset;
+ __dma_sync_for_device(addr, size, direction);
+
+ return page_to_phys(page) + offset;
+}
+EXPORT_SYMBOL(dma_map_page);
+
+void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(!valid_dma_direction(direction));
+
+ __dma_sync_for_cpu(phys_to_virt(dma_address), size, direction);
+}
+EXPORT_SYMBOL(dma_unmap_page);
+
+void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
+ enum dma_data_direction direction)
+{
+ void *addr;
+ int i;
+
+ BUG_ON(!valid_dma_direction(direction));
+
+ if (direction == DMA_TO_DEVICE)
+ return;
+
+ for_each_sg(sg, sg, nhwentries, i) {
+ addr = sg_virt(sg);
+ if (addr)
+ __dma_sync_for_cpu(addr, sg->length, direction);
+ }
+}
+EXPORT_SYMBOL(dma_unmap_sg);
+
+void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+ size_t size, enum dma_data_direction direction)
+{
+ BUG_ON(!valid_dma_direction(direction));
+
+ __dma_sync_for_cpu(phys_to_virt(dma_handle), size, direction);
+}
+EXPORT_SYMBOL(dma_sync_single_for_cpu);
+
+void dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
+ size_t size, enum dma_data_direction direction)
+{
+ BUG_ON(!valid_dma_direction(direction));
+
+ __dma_sync_for_device(phys_to_virt(dma_handle), size, direction);
+}
+EXPORT_SYMBOL(dma_sync_single_for_device);
+
+void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_handle,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(!valid_dma_direction(direction));
+
+ __dma_sync_for_cpu(phys_to_virt(dma_handle), size, direction);
+}
+EXPORT_SYMBOL(dma_sync_single_range_for_cpu);
+
+void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_handle,
+ unsigned long offset, size_t size,
+ enum dma_data_direction direction)
+{
+ BUG_ON(!valid_dma_direction(direction));
+
+ __dma_sync_for_device(phys_to_virt(dma_handle), size, direction);
+}
+EXPORT_SYMBOL(dma_sync_single_range_for_device);
+
+void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nelems,
+ enum dma_data_direction direction)
+{
+ int i;
+
+ BUG_ON(!valid_dma_direction(direction));
+
+ /* Make sure that gcc doesn't leave the empty loop body. */
+ for_each_sg(sg, sg, nelems, i)
+ __dma_sync_for_cpu(sg_virt(sg), sg->length, direction);
+}
+EXPORT_SYMBOL(dma_sync_sg_for_cpu);
+
+void dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+ int nelems, enum dma_data_direction direction)
+{
+ int i;
+
+ BUG_ON(!valid_dma_direction(direction));
+
+ /* Make sure that gcc doesn't leave the empty loop body. */
+ for_each_sg(sg, sg, nelems, i)
+ __dma_sync_for_device(sg_virt(sg), sg->length, direction);
+
+}
+EXPORT_SYMBOL(dma_sync_sg_for_device);
--- /dev/null
+/*
+ * Copyright (C) 2010, Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2009, Wind River Systems Inc
+ * Implemented by fredrik.markstrom@gmail.com and ivarholmqvist@gmail.com
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/uaccess.h>
+
+int fixup_exception(struct pt_regs *regs)
+{
+ const struct exception_table_entry *fixup;
+
+ fixup = search_exception_tables(regs->ea);
+ if (fixup) {
+ regs->ea = fixup->fixup;
+ return 1;
+ }
+
+ return 0;
+}
--- /dev/null
+/*
+ * Copyright (C) 2009 Wind River Systems Inc
+ * Implemented by fredrik.markstrom@gmail.com and ivarholmqvist@gmail.com
+ *
+ * based on arch/mips/mm/fault.c which is:
+ *
+ * Copyright (C) 1995-2000 Ralf Baechle
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/ptrace.h>
+
+#include <asm/mmu_context.h>
+#include <asm/traps.h>
+
+#define EXC_SUPERV_INSN_ACCESS 9 /* Supervisor only instruction address */
+#define EXC_SUPERV_DATA_ACCESS 11 /* Supervisor only data address */
+#define EXC_X_PROTECTION_FAULT 13 /* TLB permission violation (x) */
+#define EXC_R_PROTECTION_FAULT 14 /* TLB permission violation (r) */
+#define EXC_W_PROTECTION_FAULT 15 /* TLB permission violation (w) */
+
+/*
+ * This routine handles page faults. It determines the address,
+ * and the problem, and then passes it off to one of the appropriate
+ * routines.
+ */
+asmlinkage void do_page_fault(struct pt_regs *regs, unsigned long cause,
+ unsigned long address)
+{
+ struct vm_area_struct *vma = NULL;
+ struct task_struct *tsk = current;
+ struct mm_struct *mm = tsk->mm;
+ int code = SEGV_MAPERR;
+ int fault;
+ unsigned int flags = 0;
+
+ cause >>= 2;
+
+ /* Restart the instruction */
+ regs->ea -= 4;
+
+ /*
+ * We fault-in kernel-space virtual memory on-demand. The
+ * 'reference' page table is init_mm.pgd.
+ *
+ * NOTE! We MUST NOT take any locks for this case. We may
+ * be in an interrupt or a critical region, and should
+ * only copy the information from the master page table,
+ * nothing more.
+ */
+ if (unlikely(address >= VMALLOC_START && address <= VMALLOC_END)) {
+ if (user_mode(regs))
+ goto bad_area_nosemaphore;
+ else
+ goto vmalloc_fault;
+ }
+
+ if (unlikely(address >= TASK_SIZE))
+ goto bad_area_nosemaphore;
+
+ /*
+ * If we're in an interrupt or have no user
+ * context, we must not take the fault..
+ */
+ if (in_atomic() || !mm)
+ goto bad_area_nosemaphore;
+
+ if (user_mode(regs))
+ flags |= FAULT_FLAG_USER;
+
+ if (!down_read_trylock(&mm->mmap_sem)) {
+ if (!user_mode(regs) && !search_exception_tables(regs->ea))
+ goto bad_area_nosemaphore;
+ down_read(&mm->mmap_sem);
+ }
+
+ vma = find_vma(mm, address);
+ if (!vma)
+ goto bad_area;
+ if (vma->vm_start <= address)
+ goto good_area;
+ if (!(vma->vm_flags & VM_GROWSDOWN))
+ goto bad_area;
+ if (expand_stack(vma, address))
+ goto bad_area;
+/*
+ * Ok, we have a good vm_area for this memory access, so
+ * we can handle it..
+ */
+good_area:
+ code = SEGV_ACCERR;
+
+ switch (cause) {
+ case EXC_SUPERV_INSN_ACCESS:
+ goto bad_area;
+ case EXC_SUPERV_DATA_ACCESS:
+ goto bad_area;
+ case EXC_X_PROTECTION_FAULT:
+ if (!(vma->vm_flags & VM_EXEC))
+ goto bad_area;
+ break;
+ case EXC_R_PROTECTION_FAULT:
+ if (!(vma->vm_flags & VM_READ))
+ goto bad_area;
+ break;
+ case EXC_W_PROTECTION_FAULT:
+ if (!(vma->vm_flags & VM_WRITE))
+ goto bad_area;
+ flags = FAULT_FLAG_WRITE;
+ break;
+ }
+
+survive:
+ /*
+ * If for any reason at all we couldn't handle the fault,
+ * make sure we exit gracefully rather than endlessly redo
+ * the fault.
+ */
+ fault = handle_mm_fault(mm, vma, address, flags);
+ if (unlikely(fault & VM_FAULT_ERROR)) {
+ if (fault & VM_FAULT_OOM)
+ goto out_of_memory;
+ else if (fault & VM_FAULT_SIGBUS)
+ goto do_sigbus;
+ BUG();
+ }
+ if (fault & VM_FAULT_MAJOR)
+ tsk->maj_flt++;
+ else
+ tsk->min_flt++;
+
+ up_read(&mm->mmap_sem);
+ return;
+
+/*
+ * Something tried to access memory that isn't in our memory map..
+ * Fix it, but check if it's kernel or user first..
+ */
+bad_area:
+ up_read(&mm->mmap_sem);
+
+bad_area_nosemaphore:
+ /* User mode accesses just cause a SIGSEGV */
+ if (user_mode(regs)) {
+ pr_alert("%s: unhandled page fault (%d) at 0x%08lx, "
+ "cause %ld\n", current->comm, SIGSEGV, address, cause);
+ show_regs(regs);
+ _exception(SIGSEGV, regs, code, address);
+ return;
+ }
+
+no_context:
+ /* Are we prepared to handle this kernel fault? */
+ if (fixup_exception(regs))
+ return;
+
+ /*
+ * Oops. The kernel tried to access some bad page. We'll have to
+ * terminate things with extreme prejudice.
+ */
+ bust_spinlocks(1);
+
+ pr_alert("Unable to handle kernel %s at virtual address %08lx",
+ address < PAGE_SIZE ? "NULL pointer dereference" :
+ "paging request", address);
+ pr_alert("ea = %08lx, ra = %08lx, cause = %ld\n", regs->ea, regs->ra,
+ cause);
+ panic("Oops");
+ return;
+
+/*
+ * We ran out of memory, or some other thing happened to us that made
+ * us unable to handle the page fault gracefully.
+ */
+out_of_memory:
+ up_read(&mm->mmap_sem);
+ if (is_global_init(tsk)) {
+ yield();
+ down_read(&mm->mmap_sem);
+ goto survive;
+ }
+ if (!user_mode(regs))
+ goto no_context;
+ pagefault_out_of_memory();
+ return;
+
+do_sigbus:
+ up_read(&mm->mmap_sem);
+
+ /* Kernel mode? Handle exceptions or die */
+ if (!user_mode(regs))
+ goto no_context;
+
+ _exception(SIGBUS, regs, BUS_ADRERR, address);
+ return;
+
+vmalloc_fault:
+ {
+ /*
+ * Synchronize this task's top level page-table
+ * with the 'reference' page table.
+ *
+ * Do _not_ use "tsk" here. We might be inside
+ * an interrupt in the middle of a task switch..
+ */
+ int offset = pgd_index(address);
+ pgd_t *pgd, *pgd_k;
+ pud_t *pud, *pud_k;
+ pmd_t *pmd, *pmd_k;
+ pte_t *pte_k;
+
+ pgd = pgd_current + offset;
+ pgd_k = init_mm.pgd + offset;
+
+ if (!pgd_present(*pgd_k))
+ goto no_context;
+ set_pgd(pgd, *pgd_k);
+
+ pud = pud_offset(pgd, address);
+ pud_k = pud_offset(pgd_k, address);
+ if (!pud_present(*pud_k))
+ goto no_context;
+ pmd = pmd_offset(pud, address);
+ pmd_k = pmd_offset(pud_k, address);
+ if (!pmd_present(*pmd_k))
+ goto no_context;
+ set_pmd(pmd, *pmd_k);
+
+ pte_k = pte_offset_kernel(pmd_k, address);
+ if (!pte_present(*pte_k))
+ goto no_context;
+
+ flush_tlb_one(address);
+ return;
+ }
+}
--- /dev/null
+/*
+ * Copyright (C) 2013 Altera Corporation
+ * Copyright (C) 2010 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2009 Wind River Systems Inc
+ * Implemented by fredrik.markstrom@gmail.com and ivarholmqvist@gmail.com
+ * Copyright (C) 2004 Microtronix Datacom Ltd
+ *
+ * based on arch/m68k/mm/init.c
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/ptrace.h>
+#include <linux/mman.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/pagemap.h>
+#include <linux/bootmem.h>
+#include <linux/slab.h>
+#include <linux/binfmts.h>
+
+#include <asm/setup.h>
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/sections.h>
+#include <asm/tlb.h>
+#include <asm/mmu_context.h>
+#include <asm/cpuinfo.h>
+#include <asm/processor.h>
+
+pgd_t *pgd_current;
+
+/*
+ * paging_init() continues the virtual memory environment setup which
+ * was begun by the code in arch/head.S.
+ * The parameters are pointers to where to stick the starting and ending
+ * addresses of available kernel virtual memory.
+ */
+void __init paging_init(void)
+{
+ unsigned long zones_size[MAX_NR_ZONES];
+
+ memset(zones_size, 0, sizeof(zones_size));
+
+ pagetable_init();
+ pgd_current = swapper_pg_dir;
+
+ zones_size[ZONE_NORMAL] = max_mapnr;
+
+ /* pass the memory from the bootmem allocator to the main allocator */
+ free_area_init(zones_size);
+
+ flush_dcache_range((unsigned long)empty_zero_page,
+ (unsigned long)empty_zero_page + PAGE_SIZE);
+}
+
+void __init mem_init(void)
+{
+ unsigned long end_mem = memory_end; /* this must not include
+ kernel stack at top */
+
+ pr_debug("mem_init: start=%lx, end=%lx\n", memory_start, memory_end);
+
+ end_mem &= PAGE_MASK;
+ high_memory = __va(end_mem);
+
+ /* this will put all memory onto the freelists */
+ free_all_bootmem();
+ mem_init_print_info(NULL);
+}
+
+void __init mmu_init(void)
+{
+ flush_tlb_all();
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+void __init free_initrd_mem(unsigned long start, unsigned long end)
+{
+ free_reserved_area((void *)start, (void *)end, -1, "initrd");
+}
+#endif
+
+void __init_refok free_initmem(void)
+{
+ free_initmem_default(-1);
+}
+
+#define __page_aligned(order) __aligned(PAGE_SIZE << (order))
+pgd_t swapper_pg_dir[PTRS_PER_PGD] __page_aligned(PGD_ORDER);
+pte_t invalid_pte_table[PTRS_PER_PTE] __page_aligned(PTE_ORDER);
+static struct page *kuser_page[1];
+
+static int alloc_kuser_page(void)
+{
+ extern char __kuser_helper_start[], __kuser_helper_end[];
+ int kuser_sz = __kuser_helper_end - __kuser_helper_start;
+ unsigned long vpage;
+
+ vpage = get_zeroed_page(GFP_ATOMIC);
+ if (!vpage)
+ return -ENOMEM;
+
+ /* Copy kuser helpers */
+ memcpy((void *)vpage, __kuser_helper_start, kuser_sz);
+
+ flush_icache_range(vpage, vpage + KUSER_SIZE);
+ kuser_page[0] = virt_to_page(vpage);
+
+ return 0;
+}
+arch_initcall(alloc_kuser_page);
+
+int arch_setup_additional_pages(struct linux_binprm *bprm, int uses_interp)
+{
+ struct mm_struct *mm = current->mm;
+ int ret;
+
+ down_write(&mm->mmap_sem);
+
+ /* Map kuser helpers to user space address */
+ ret = install_special_mapping(mm, KUSER_BASE, KUSER_SIZE,
+ VM_READ | VM_EXEC | VM_MAYREAD |
+ VM_MAYEXEC, kuser_page);
+
+ up_write(&mm->mmap_sem);
+
+ return ret;
+}
+
+const char *arch_vma_name(struct vm_area_struct *vma)
+{
+ return (vma->vm_start == KUSER_BASE) ? "[kuser]" : NULL;
+}
--- /dev/null
+/*
+ * Copyright (C) 2010 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2009 Wind River Systems Inc
+ * Implemented by fredrik.markstrom@gmail.com and ivarholmqvist@gmail.com
+ * Copyright (C) 2004 Microtronix Datacom Ltd.
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/export.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/vmalloc.h>
+#include <linux/io.h>
+
+#include <asm/cacheflush.h>
+#include <asm/tlbflush.h>
+
+static inline void remap_area_pte(pte_t *pte, unsigned long address,
+ unsigned long size, unsigned long phys_addr,
+ unsigned long flags)
+{
+ unsigned long end;
+ unsigned long pfn;
+ pgprot_t pgprot = __pgprot(_PAGE_GLOBAL | _PAGE_PRESENT | _PAGE_READ
+ | _PAGE_WRITE | flags);
+
+ address &= ~PMD_MASK;
+ end = address + size;
+ if (end > PMD_SIZE)
+ end = PMD_SIZE;
+ if (address >= end)
+ BUG();
+ pfn = PFN_DOWN(phys_addr);
+ do {
+ if (!pte_none(*pte)) {
+ pr_err("remap_area_pte: page already exists\n");
+ BUG();
+ }
+ set_pte(pte, pfn_pte(pfn, pgprot));
+ address += PAGE_SIZE;
+ pfn++;
+ pte++;
+ } while (address && (address < end));
+}
+
+static inline int remap_area_pmd(pmd_t *pmd, unsigned long address,
+ unsigned long size, unsigned long phys_addr,
+ unsigned long flags)
+{
+ unsigned long end;
+
+ address &= ~PGDIR_MASK;
+ end = address + size;
+ if (end > PGDIR_SIZE)
+ end = PGDIR_SIZE;
+ phys_addr -= address;
+ if (address >= end)
+ BUG();
+ do {
+ pte_t *pte = pte_alloc_kernel(pmd, address);
+
+ if (!pte)
+ return -ENOMEM;
+ remap_area_pte(pte, address, end - address, address + phys_addr,
+ flags);
+ address = (address + PMD_SIZE) & PMD_MASK;
+ pmd++;
+ } while (address && (address < end));
+ return 0;
+}
+
+static int remap_area_pages(unsigned long address, unsigned long phys_addr,
+ unsigned long size, unsigned long flags)
+{
+ int error;
+ pgd_t *dir;
+ unsigned long end = address + size;
+
+ phys_addr -= address;
+ dir = pgd_offset(&init_mm, address);
+ flush_cache_all();
+ if (address >= end)
+ BUG();
+ do {
+ pud_t *pud;
+ pmd_t *pmd;
+
+ error = -ENOMEM;
+ pud = pud_alloc(&init_mm, dir, address);
+ if (!pud)
+ break;
+ pmd = pmd_alloc(&init_mm, pud, address);
+ if (!pmd)
+ break;
+ if (remap_area_pmd(pmd, address, end - address,
+ phys_addr + address, flags))
+ break;
+ error = 0;
+ address = (address + PGDIR_SIZE) & PGDIR_MASK;
+ dir++;
+ } while (address && (address < end));
+ flush_tlb_all();
+ return error;
+}
+
+#define IS_MAPPABLE_UNCACHEABLE(addr) (addr < 0x20000000UL)
+
+/*
+ * Map some physical address range into the kernel address space.
+ */
+void __iomem *__ioremap(unsigned long phys_addr, unsigned long size,
+ unsigned long cacheflag)
+{
+ struct vm_struct *area;
+ unsigned long offset;
+ unsigned long last_addr;
+ void *addr;
+
+ /* Don't allow wraparound or zero size */
+ last_addr = phys_addr + size - 1;
+
+ if (!size || last_addr < phys_addr)
+ return NULL;
+
+ /* Don't allow anybody to remap normal RAM that we're using */
+ if (phys_addr > PHYS_OFFSET && phys_addr < virt_to_phys(high_memory)) {
+ char *t_addr, *t_end;
+ struct page *page;
+
+ t_addr = __va(phys_addr);
+ t_end = t_addr + (size - 1);
+ for (page = virt_to_page(t_addr);
+ page <= virt_to_page(t_end); page++)
+ if (!PageReserved(page))
+ return NULL;
+ }
+
+ /*
+ * Map uncached objects in the low part of address space to
+ * CONFIG_NIOS2_IO_REGION_BASE
+ */
+ if (IS_MAPPABLE_UNCACHEABLE(phys_addr) &&
+ IS_MAPPABLE_UNCACHEABLE(last_addr) &&
+ !(cacheflag & _PAGE_CACHED))
+ return (void __iomem *)(CONFIG_NIOS2_IO_REGION_BASE + phys_addr);
+
+ /* Mappings have to be page-aligned */
+ offset = phys_addr & ~PAGE_MASK;
+ phys_addr &= PAGE_MASK;
+ size = PAGE_ALIGN(last_addr + 1) - phys_addr;
+
+ /* Ok, go for it */
+ area = get_vm_area(size, VM_IOREMAP);
+ if (!area)
+ return NULL;
+ addr = area->addr;
+ if (remap_area_pages((unsigned long) addr, phys_addr, size,
+ cacheflag)) {
+ vunmap(addr);
+ return NULL;
+ }
+ return (void __iomem *) (offset + (char *)addr);
+}
+EXPORT_SYMBOL(__ioremap);
+
+/*
+ * __iounmap unmaps nearly everything, so be careful
+ * it doesn't free currently pointer/page tables anymore but it
+ * wasn't used anyway and might be added later.
+ */
+void __iounmap(void __iomem *addr)
+{
+ struct vm_struct *p;
+
+ if ((unsigned long) addr > CONFIG_NIOS2_IO_REGION_BASE)
+ return;
+
+ p = remove_vm_area((void *) (PAGE_MASK & (unsigned long __force) addr));
+ if (!p)
+ pr_err("iounmap: bad address %p\n", addr);
+ kfree(p);
+}
+EXPORT_SYMBOL(__iounmap);
--- /dev/null
+/*
+ * MMU context handling.
+ *
+ * Copyright (C) 2011 Tobias Klauser <tklauser@distanz.ch>
+ * Copyright (C) 2009 Wind River Systems Inc
+ * Implemented by fredrik.markstrom@gmail.com and ivarholmqvist@gmail.com
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/mm.h>
+
+#include <asm/cpuinfo.h>
+#include <asm/mmu_context.h>
+#include <asm/tlb.h>
+
+/* The pids position and mask in context */
+#define PID_SHIFT 0
+#define PID_BITS (cpuinfo.tlb_pid_num_bits)
+#define PID_MASK ((1UL << PID_BITS) - 1)
+
+/* The versions position and mask in context */
+#define VERSION_BITS (32 - PID_BITS)
+#define VERSION_SHIFT (PID_SHIFT + PID_BITS)
+#define VERSION_MASK ((1UL << VERSION_BITS) - 1)
+
+/* Return the version part of a context */
+#define CTX_VERSION(c) (((c) >> VERSION_SHIFT) & VERSION_MASK)
+
+/* Return the pid part of a context */
+#define CTX_PID(c) (((c) >> PID_SHIFT) & PID_MASK)
+
+/* Value of the first context (version 1, pid 0) */
+#define FIRST_CTX ((1UL << VERSION_SHIFT) | (0 << PID_SHIFT))
+
+static mm_context_t next_mmu_context;
+
+/*
+ * Initialize MMU context management stuff.
+ */
+void __init mmu_context_init(void)
+{
+ /* We need to set this here because the value depends on runtime data
+ * from cpuinfo */
+ next_mmu_context = FIRST_CTX;
+}
+
+/*
+ * Set new context (pid), keep way
+ */
+static void set_context(mm_context_t context)
+{
+ set_mmu_pid(CTX_PID(context));
+}
+
+static mm_context_t get_new_context(void)
+{
+ /* Return the next pid */
+ next_mmu_context += (1UL << PID_SHIFT);
+
+ /* If the pid field wraps around we increase the version and
+ * flush the tlb */
+ if (unlikely(CTX_PID(next_mmu_context) == 0)) {
+ /* Version is incremented since the pid increment above
+ * overflows info version */
+ flush_cache_all();
+ flush_tlb_all();
+ }
+
+ /* If the version wraps we start over with the first generation, we do
+ * not need to flush the tlb here since it's always done above */
+ if (unlikely(CTX_VERSION(next_mmu_context) == 0))
+ next_mmu_context = FIRST_CTX;
+
+ return next_mmu_context;
+}
+
+void switch_mm(struct mm_struct *prev, struct mm_struct *next,
+ struct task_struct *tsk)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+ /* If the process context we are swapping in has a different context
+ * generation then we have it should get a new generation/pid */
+ if (unlikely(CTX_VERSION(next->context) !=
+ CTX_VERSION(next_mmu_context)))
+ next->context = get_new_context();
+
+ /* Save the current pgd so the fast tlb handler can find it */
+ pgd_current = next->pgd;
+
+ /* Set the current context */
+ set_context(next->context);
+
+ local_irq_restore(flags);
+}
+
+/*
+ * After we have set current->mm to a new value, this activates
+ * the context for the new mm so we see the new mappings.
+ */
+void activate_mm(struct mm_struct *prev, struct mm_struct *next)
+{
+ next->context = get_new_context();
+ set_context(next->context);
+ pgd_current = next->pgd;
+}
+
+unsigned long get_pid_from_context(mm_context_t *context)
+{
+ return CTX_PID((*context));
+}
--- /dev/null
+/*
+ * Copyright (C) 2009 Wind River Systems Inc
+ * Implemented by fredrik.markstrom@gmail.com and ivarholmqvist@gmail.com
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/mm.h>
+#include <linux/sched.h>
+
+#include <asm/pgtable.h>
+#include <asm/cpuinfo.h>
+
+/* pteaddr:
+ * ptbase | vpn* | zero
+ * 31-22 | 21-2 | 1-0
+ *
+ * *vpn is preserved on double fault
+ *
+ * tlbacc:
+ * IG |*flags| pfn
+ * 31-25|24-20 | 19-0
+ *
+ * *crwxg
+ *
+ * tlbmisc:
+ * resv |way |rd | we|pid |dbl|bad|perm|d
+ * 31-24 |23-20 |19 | 20|17-4|3 |2 |1 |0
+ *
+ */
+
+/*
+ * Initialize a new pgd / pmd table with invalid pointers.
+ */
+static void pgd_init(pgd_t *pgd)
+{
+ unsigned long *p = (unsigned long *) pgd;
+ int i;
+
+ for (i = 0; i < USER_PTRS_PER_PGD; i += 8) {
+ p[i + 0] = (unsigned long) invalid_pte_table;
+ p[i + 1] = (unsigned long) invalid_pte_table;
+ p[i + 2] = (unsigned long) invalid_pte_table;
+ p[i + 3] = (unsigned long) invalid_pte_table;
+ p[i + 4] = (unsigned long) invalid_pte_table;
+ p[i + 5] = (unsigned long) invalid_pte_table;
+ p[i + 6] = (unsigned long) invalid_pte_table;
+ p[i + 7] = (unsigned long) invalid_pte_table;
+ }
+}
+
+pgd_t *pgd_alloc(struct mm_struct *mm)
+{
+ pgd_t *ret, *init;
+
+ ret = (pgd_t *) __get_free_pages(GFP_KERNEL, PGD_ORDER);
+ if (ret) {
+ init = pgd_offset(&init_mm, 0UL);
+ pgd_init(ret);
+ memcpy(ret + USER_PTRS_PER_PGD, init + USER_PTRS_PER_PGD,
+ (PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+ }
+
+ return ret;
+}
+
+void __init pagetable_init(void)
+{
+ /* Initialize the entire pgd. */
+ pgd_init(swapper_pg_dir);
+ pgd_init(swapper_pg_dir + USER_PTRS_PER_PGD);
+}
--- /dev/null
+/*
+ * Nios2 TLB handling
+ *
+ * Copyright (C) 2009, Wind River Systems Inc
+ * Implemented by fredrik.markstrom@gmail.com and ivarholmqvist@gmail.com
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <linux/pagemap.h>
+
+#include <asm/tlb.h>
+#include <asm/mmu_context.h>
+#include <asm/pgtable.h>
+#include <asm/cpuinfo.h>
+
+#define TLB_INDEX_MASK \
+ ((((1UL << (cpuinfo.tlb_ptr_sz - cpuinfo.tlb_num_ways_log2))) - 1) \
+ << PAGE_SHIFT)
+
+/* Used as illegal PHYS_ADDR for TLB mappings
+ */
+#define MAX_PHYS_ADDR 0
+
+static void get_misc_and_pid(unsigned long *misc, unsigned long *pid)
+{
+ *misc = RDCTL(CTL_TLBMISC);
+ *misc &= (TLBMISC_PID | TLBMISC_WAY);
+ *pid = *misc & TLBMISC_PID;
+}
+
+/*
+ * All entries common to a mm share an asid. To effectively flush these
+ * entries, we just bump the asid.
+ */
+void flush_tlb_mm(struct mm_struct *mm)
+{
+ if (current->mm == mm)
+ flush_tlb_all();
+ else
+ memset(&mm->context, 0, sizeof(mm_context_t));
+}
+
+/*
+ * This one is only used for pages with the global bit set so we don't care
+ * much about the ASID.
+ */
+void flush_tlb_one_pid(unsigned long addr, unsigned long mmu_pid)
+{
+ unsigned int way;
+ unsigned long org_misc, pid_misc;
+
+ pr_debug("Flush tlb-entry for vaddr=%#lx\n", addr);
+
+ /* remember pid/way until we return. */
+ get_misc_and_pid(&org_misc, &pid_misc);
+
+ WRCTL(CTL_PTEADDR, (addr >> PAGE_SHIFT) << 2);
+
+ for (way = 0; way < cpuinfo.tlb_num_ways; way++) {
+ unsigned long pteaddr;
+ unsigned long tlbmisc;
+ unsigned long pid;
+
+ tlbmisc = pid_misc | TLBMISC_RD | (way << TLBMISC_WAY_SHIFT);
+ WRCTL(CTL_TLBMISC, tlbmisc);
+ pteaddr = RDCTL(CTL_PTEADDR);
+ tlbmisc = RDCTL(CTL_TLBMISC);
+ pid = (tlbmisc >> TLBMISC_PID_SHIFT) & TLBMISC_PID_MASK;
+ if (((((pteaddr >> 2) & 0xfffff)) == (addr >> PAGE_SHIFT)) &&
+ pid == mmu_pid) {
+ unsigned long vaddr = CONFIG_NIOS2_IO_REGION_BASE +
+ ((PAGE_SIZE * cpuinfo.tlb_num_lines) * way) +
+ (addr & TLB_INDEX_MASK);
+ pr_debug("Flush entry by writing %#lx way=%dl pid=%ld\n",
+ vaddr, way, (pid_misc >> TLBMISC_PID_SHIFT));
+
+ WRCTL(CTL_PTEADDR, (vaddr >> 12) << 2);
+ tlbmisc = pid_misc | TLBMISC_WE |
+ (way << TLBMISC_WAY_SHIFT);
+ WRCTL(CTL_TLBMISC, tlbmisc);
+ WRCTL(CTL_TLBACC, (MAX_PHYS_ADDR >> PAGE_SHIFT));
+ }
+ }
+
+ WRCTL(CTL_TLBMISC, org_misc);
+}
+
+void flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
+ unsigned long end)
+{
+ unsigned long mmu_pid = get_pid_from_context(&vma->vm_mm->context);
+
+ while (start < end) {
+ flush_tlb_one_pid(start, mmu_pid);
+ start += PAGE_SIZE;
+ }
+}
+
+void flush_tlb_kernel_range(unsigned long start, unsigned long end)
+{
+ while (start < end) {
+ flush_tlb_one(start);
+ start += PAGE_SIZE;
+ }
+}
+
+/*
+ * This one is only used for pages with the global bit set so we don't care
+ * much about the ASID.
+ */
+void flush_tlb_one(unsigned long addr)
+{
+ unsigned int way;
+ unsigned long org_misc, pid_misc;
+
+ pr_debug("Flush tlb-entry for vaddr=%#lx\n", addr);
+
+ /* remember pid/way until we return. */
+ get_misc_and_pid(&org_misc, &pid_misc);
+
+ WRCTL(CTL_PTEADDR, (addr >> PAGE_SHIFT) << 2);
+
+ for (way = 0; way < cpuinfo.tlb_num_ways; way++) {
+ unsigned long pteaddr;
+ unsigned long tlbmisc;
+
+ tlbmisc = pid_misc | TLBMISC_RD | (way << TLBMISC_WAY_SHIFT);
+ WRCTL(CTL_TLBMISC, tlbmisc);
+ pteaddr = RDCTL(CTL_PTEADDR);
+ tlbmisc = RDCTL(CTL_TLBMISC);
+
+ if ((((pteaddr >> 2) & 0xfffff)) == (addr >> PAGE_SHIFT)) {
+ unsigned long vaddr = CONFIG_NIOS2_IO_REGION_BASE +
+ ((PAGE_SIZE * cpuinfo.tlb_num_lines) * way) +
+ (addr & TLB_INDEX_MASK);
+
+ pr_debug("Flush entry by writing %#lx way=%dl pid=%ld\n",
+ vaddr, way, (pid_misc >> TLBMISC_PID_SHIFT));
+
+ tlbmisc = pid_misc | TLBMISC_WE |
+ (way << TLBMISC_WAY_SHIFT);
+ WRCTL(CTL_PTEADDR, (vaddr >> 12) << 2);
+ WRCTL(CTL_TLBMISC, tlbmisc);
+ WRCTL(CTL_TLBACC, (MAX_PHYS_ADDR >> PAGE_SHIFT));
+ }
+ }
+
+ WRCTL(CTL_TLBMISC, org_misc);
+}
+
+void dump_tlb_line(unsigned long line)
+{
+ unsigned int way;
+ unsigned long org_misc;
+
+ pr_debug("dump tlb-entries for line=%#lx (addr %08lx)\n", line,
+ line << (PAGE_SHIFT + cpuinfo.tlb_num_ways_log2));
+
+ /* remember pid/way until we return */
+ org_misc = (RDCTL(CTL_TLBMISC) & (TLBMISC_PID | TLBMISC_WAY));
+
+ WRCTL(CTL_PTEADDR, line << 2);
+
+ for (way = 0; way < cpuinfo.tlb_num_ways; way++) {
+ unsigned long pteaddr;
+ unsigned long tlbmisc;
+ unsigned long tlbacc;
+
+ WRCTL(CTL_TLBMISC, TLBMISC_RD | (way << TLBMISC_WAY_SHIFT));
+ pteaddr = RDCTL(CTL_PTEADDR);
+ tlbmisc = RDCTL(CTL_TLBMISC);
+ tlbacc = RDCTL(CTL_TLBACC);
+
+ if ((tlbacc << PAGE_SHIFT) != (MAX_PHYS_ADDR & PAGE_MASK)) {
+ pr_debug("-- way:%02x vpn:0x%08lx phys:0x%08lx pid:0x%02lx flags:%c%c%c%c%c\n",
+ way,
+ (pteaddr << (PAGE_SHIFT-2)),
+ (tlbacc << PAGE_SHIFT),
+ ((tlbmisc >> TLBMISC_PID_SHIFT) &
+ TLBMISC_PID_MASK),
+ (tlbacc & _PAGE_READ ? 'r' : '-'),
+ (tlbacc & _PAGE_WRITE ? 'w' : '-'),
+ (tlbacc & _PAGE_EXEC ? 'x' : '-'),
+ (tlbacc & _PAGE_GLOBAL ? 'g' : '-'),
+ (tlbacc & _PAGE_CACHED ? 'c' : '-'));
+ }
+ }
+
+ WRCTL(CTL_TLBMISC, org_misc);
+}
+
+void dump_tlb(void)
+{
+ unsigned int i;
+
+ for (i = 0; i < cpuinfo.tlb_num_lines; i++)
+ dump_tlb_line(i);
+}
+
+void flush_tlb_pid(unsigned long pid)
+{
+ unsigned int line;
+ unsigned int way;
+ unsigned long org_misc, pid_misc;
+
+ /* remember pid/way until we return */
+ get_misc_and_pid(&org_misc, &pid_misc);
+
+ for (line = 0; line < cpuinfo.tlb_num_lines; line++) {
+ WRCTL(CTL_PTEADDR, line << 2);
+
+ for (way = 0; way < cpuinfo.tlb_num_ways; way++) {
+ unsigned long pteaddr;
+ unsigned long tlbmisc;
+ unsigned long tlbacc;
+
+ tlbmisc = pid_misc | TLBMISC_RD |
+ (way << TLBMISC_WAY_SHIFT);
+ WRCTL(CTL_TLBMISC, tlbmisc);
+ pteaddr = RDCTL(CTL_PTEADDR);
+ tlbmisc = RDCTL(CTL_TLBMISC);
+ tlbacc = RDCTL(CTL_TLBACC);
+
+ if (((tlbmisc>>TLBMISC_PID_SHIFT) & TLBMISC_PID_MASK)
+ == pid) {
+ tlbmisc = pid_misc | TLBMISC_WE |
+ (way << TLBMISC_WAY_SHIFT);
+ WRCTL(CTL_TLBMISC, tlbmisc);
+ WRCTL(CTL_TLBACC,
+ (MAX_PHYS_ADDR >> PAGE_SHIFT));
+ }
+ }
+
+ WRCTL(CTL_TLBMISC, org_misc);
+ }
+}
+
+void flush_tlb_all(void)
+{
+ int i;
+ unsigned long vaddr = CONFIG_NIOS2_IO_REGION_BASE;
+ unsigned int way;
+ unsigned long org_misc, pid_misc, tlbmisc;
+
+ /* remember pid/way until we return */
+ get_misc_and_pid(&org_misc, &pid_misc);
+ pid_misc |= TLBMISC_WE;
+
+ /* Map each TLB entry to physcal address 0 with no-access and a
+ bad ptbase */
+ for (way = 0; way < cpuinfo.tlb_num_ways; way++) {
+ tlbmisc = pid_misc | (way << TLBMISC_WAY_SHIFT);
+ for (i = 0; i < cpuinfo.tlb_num_lines; i++) {
+ WRCTL(CTL_PTEADDR, ((vaddr) >> PAGE_SHIFT) << 2);
+ WRCTL(CTL_TLBMISC, tlbmisc);
+ WRCTL(CTL_TLBACC, (MAX_PHYS_ADDR >> PAGE_SHIFT));
+ vaddr += 1UL << 12;
+ }
+ }
+
+ /* restore pid/way */
+ WRCTL(CTL_TLBMISC, org_misc);
+}
+
+void set_mmu_pid(unsigned long pid)
+{
+ WRCTL(CTL_TLBMISC, (RDCTL(CTL_TLBMISC) & TLBMISC_WAY) |
+ ((pid & TLBMISC_PID_MASK) << TLBMISC_PID_SHIFT));
+}
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009, Wind River Systems Inc
+ * Implemented by fredrik.markstrom@gmail.com and ivarholmqvist@gmail.com
+ */
+
+#include <linux/export.h>
+#include <linux/uaccess.h>
+
+asm(".global __copy_from_user\n"
+ " .type __copy_from_user, @function\n"
+ "__copy_from_user:\n"
+ " movi r2,7\n"
+ " mov r3,r4\n"
+ " bge r2,r6,1f\n"
+ " xor r2,r4,r5\n"
+ " andi r2,r2,3\n"
+ " movi r7,3\n"
+ " beq r2,zero,4f\n"
+ "1: addi r6,r6,-1\n"
+ " movi r2,-1\n"
+ " beq r6,r2,3f\n"
+ " mov r7,r2\n"
+ "2: ldbu r2,0(r5)\n"
+ " addi r6,r6,-1\n"
+ " addi r5,r5,1\n"
+ " stb r2,0(r3)\n"
+ " addi r3,r3,1\n"
+ " bne r6,r7,2b\n"
+ "3:\n"
+ " addi r2,r6,1\n"
+ " ret\n"
+ "13:mov r2,r6\n"
+ " ret\n"
+ "4: andi r2,r4,1\n"
+ " cmpeq r2,r2,zero\n"
+ " beq r2,zero,7f\n"
+ "5: andi r2,r3,2\n"
+ " beq r2,zero,6f\n"
+ "9: ldhu r2,0(r5)\n"
+ " addi r6,r6,-2\n"
+ " addi r5,r5,2\n"
+ " sth r2,0(r3)\n"
+ " addi r3,r3,2\n"
+ "6: bge r7,r6,1b\n"
+ "10:ldw r2,0(r5)\n"
+ " addi r6,r6,-4\n"
+ " addi r5,r5,4\n"
+ " stw r2,0(r3)\n"
+ " addi r3,r3,4\n"
+ " br 6b\n"
+ "7: ldbu r2,0(r5)\n"
+ " addi r6,r6,-1\n"
+ " addi r5,r5,1\n"
+ " addi r3,r4,1\n"
+ " stb r2,0(r4)\n"
+ " br 5b\n"
+ ".section __ex_table,\"a\"\n"
+ ".word 2b,3b\n"
+ ".word 9b,13b\n"
+ ".word 10b,13b\n"
+ ".word 7b,13b\n"
+ ".previous\n"
+ );
+EXPORT_SYMBOL(__copy_from_user);
+
+asm(
+ " .global __copy_to_user\n"
+ " .type __copy_to_user, @function\n"
+ "__copy_to_user:\n"
+ " movi r2,7\n"
+ " mov r3,r4\n"
+ " bge r2,r6,1f\n"
+ " xor r2,r4,r5\n"
+ " andi r2,r2,3\n"
+ " movi r7,3\n"
+ " beq r2,zero,4f\n"
+ /* Bail if we try to copy zero bytes */
+ "1: addi r6,r6,-1\n"
+ " movi r2,-1\n"
+ " beq r6,r2,3f\n"
+ /* Copy byte by byte for small copies and if src^dst != 0 */
+ " mov r7,r2\n"
+ "2: ldbu r2,0(r5)\n"
+ " addi r5,r5,1\n"
+ "9: stb r2,0(r3)\n"
+ " addi r6,r6,-1\n"
+ " addi r3,r3,1\n"
+ " bne r6,r7,2b\n"
+ "3: addi r2,r6,1\n"
+ " ret\n"
+ "13:mov r2,r6\n"
+ " ret\n"
+ /* If 'to' is an odd address byte copy */
+ "4: andi r2,r4,1\n"
+ " cmpeq r2,r2,zero\n"
+ " beq r2,zero,7f\n"
+ /* If 'to' is not divideable by four copy halfwords */
+ "5: andi r2,r3,2\n"
+ " beq r2,zero,6f\n"
+ " ldhu r2,0(r5)\n"
+ " addi r5,r5,2\n"
+ "10:sth r2,0(r3)\n"
+ " addi r6,r6,-2\n"
+ " addi r3,r3,2\n"
+ /* Copy words */
+ "6: bge r7,r6,1b\n"
+ " ldw r2,0(r5)\n"
+ " addi r5,r5,4\n"
+ "11:stw r2,0(r3)\n"
+ " addi r6,r6,-4\n"
+ " addi r3,r3,4\n"
+ " br 6b\n"
+ /* Copy remaining bytes */
+ "7: ldbu r2,0(r5)\n"
+ " addi r5,r5,1\n"
+ " addi r3,r4,1\n"
+ "12: stb r2,0(r4)\n"
+ " addi r6,r6,-1\n"
+ " br 5b\n"
+ ".section __ex_table,\"a\"\n"
+ ".word 9b,3b\n"
+ ".word 10b,13b\n"
+ ".word 11b,13b\n"
+ ".word 12b,13b\n"
+ ".previous\n");
+EXPORT_SYMBOL(__copy_to_user);
+
+long strncpy_from_user(char *__to, const char __user *__from, long __len)
+{
+ int l = strnlen_user(__from, __len);
+ int is_zt = 1;
+
+ if (l > __len) {
+ is_zt = 0;
+ l = __len;
+ }
+
+ if (l == 0 || copy_from_user(__to, __from, l))
+ return -EFAULT;
+
+ if (is_zt)
+ l--;
+ return l;
+}
+
+long strnlen_user(const char __user *s, long n)
+{
+ long i;
+
+ for (i = 0; i < n; i++) {
+ char c;
+
+ if (get_user(c, s + i) == -EFAULT)
+ return 0;
+ if (c == 0)
+ return i + 1;
+ }
+ return n + 1;
+}
--- /dev/null
+menu "Platform options"
+
+comment "Memory settings"
+
+config NIOS2_MEM_BASE
+ hex "Memory base address"
+ default "0x00000000"
+ help
+ This is the physical address of the memory that the kernel will run
+ from. This address is used to link the kernel and setup initial memory
+ management. You should take the raw memory address without any MMU
+ or cache bits set.
+ Please not that this address is used directly so you have to manually
+ do address translation if it's connected to a bridge.
+
+comment "Device tree"
+
+config NIOS2_DTB_AT_PHYS_ADDR
+ bool "DTB at physical address"
+ default n
+ help
+ When enabled you can select a physical address to load the dtb from.
+ Normally this address is passed by a bootloader such as u-boot but
+ using this you can use a devicetree without a bootloader.
+ This way you can store a devicetree in NOR flash or an onchip rom.
+ Please note that this address is used directly so you have to manually
+ do address translation if it's connected to a bridge. Also take into
+ account that when using an MMU you'd have to ad 0xC0000000 to your
+ address
+
+config NIOS2_DTB_PHYS_ADDR
+ hex "DTB Address"
+ depends on NIOS2_DTB_AT_PHYS_ADDR
+ default "0xC0000000"
+ help
+ Physical address of a dtb blob.
+
+config NIOS2_DTB_SOURCE_BOOL
+ bool "Compile and link device tree into kernel image"
+ default n
+ help
+ This allows you to specify a dts (device tree source) file
+ which will be compiled and linked into the kernel image.
+
+config NIOS2_DTB_SOURCE
+ string "Device tree source file"
+ depends on NIOS2_DTB_SOURCE_BOOL
+ default ""
+ help
+ Absolute path to the device tree source (dts) file describing your
+ system.
+
+comment "Nios II instructions"
+
+config NIOS2_HW_MUL_SUPPORT
+ bool "Enable MUL instruction"
+ default n
+ help
+ Set to true if you configured the Nios II to include the MUL
+ instruction. This will enable the -mhw-mul compiler flag.
+
+config NIOS2_HW_MULX_SUPPORT
+ bool "Enable MULX instruction"
+ default n
+ help
+ Set to true if you configured the Nios II to include the MULX
+ instruction. Enables the -mhw-mulx compiler flag.
+
+config NIOS2_HW_DIV_SUPPORT
+ bool "Enable DIV instruction"
+ default n
+ help
+ Set to true if you configured the Nios II to include the DIV
+ instruction. Enables the -mhw-div compiler flag.
+
+config NIOS2_FPU_SUPPORT
+ bool "Custom floating point instr support"
+ default n
+ help
+ Enables the -mcustom-fpu-cfg=60-1 compiler flag.
+
+config NIOS2_CI_SWAB_SUPPORT
+ bool "Byteswap custom instruction"
+ default n
+ help
+ Use the byteswap (endian converter) Nios II custom instruction provided
+ by Altera and which can be enabled in QSYS builder. This accelerates
+ endian conversions in the kernel (e.g. ntohs).
+
+config NIOS2_CI_SWAB_NO
+ int "Byteswap custom instruction number" if NIOS2_CI_SWAB_SUPPORT
+ default 0
+ help
+ Number of the instruction as configured in QSYS Builder.
+
+comment "Cache settings"
+
+config CUSTOM_CACHE_SETTINGS
+ bool "Custom cache settings"
+ help
+ This option allows you to tweak the cache settings used during early
+ boot (where the information from device tree is not yet available).
+ There should be no reason to change these values. Linux will work
+ perfectly fine, even if the Nios II is configured with smaller caches.
+
+ Say N here unless you know what you are doing.
+
+config NIOS2_DCACHE_SIZE
+ hex "D-Cache size" if CUSTOM_CACHE_SETTINGS
+ range 0x200 0x10000
+ default "0x800"
+ help
+ Maximum possible data cache size.
+
+config NIOS2_DCACHE_LINE_SIZE
+ hex "D-Cache line size" if CUSTOM_CACHE_SETTINGS
+ range 0x10 0x20
+ default "0x20"
+ help
+ Minimum possible data cache line size.
+
+config NIOS2_ICACHE_SIZE
+ hex "I-Cache size" if CUSTOM_CACHE_SETTINGS
+ range 0x200 0x10000
+ default "0x1000"
+ help
+ Maximum possible instruction cache size.
+
+endmenu
--- /dev/null
+obj-y += platform.o
--- /dev/null
+/*
+ * Copyright (C) 2013 Altera Corporation
+ * Copyright (C) 2011 Thomas Chou
+ * Copyright (C) 2011 Walter Goossens
+ *
+ * This file is subject to the terms and conditions of the GNU General
+ * Public License. See the file COPYING in the main directory of this
+ * archive for more details.
+ */
+
+#include <linux/init.h>
+#include <linux/of_platform.h>
+#include <linux/of_address.h>
+#include <linux/of_fdt.h>
+#include <linux/err.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+#include <linux/io.h>
+
+static int __init nios2_soc_device_init(void)
+{
+ struct soc_device *soc_dev;
+ struct soc_device_attribute *soc_dev_attr;
+ const char *machine;
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (soc_dev_attr) {
+ machine = of_flat_dt_get_machine_name();
+ if (machine)
+ soc_dev_attr->machine = kasprintf(GFP_KERNEL, "%s",
+ machine);
+
+ soc_dev_attr->family = "Nios II";
+
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ kfree(soc_dev_attr->machine);
+ kfree(soc_dev_attr);
+ }
+ }
+
+ return of_platform_populate(NULL, of_default_bus_match_table,
+ NULL, NULL);
+}
+
+device_initcall(nios2_soc_device_init);
#define writel writel
#define writeq writeq
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-#define readq_relaxed(addr) readq(addr)
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+#define readq_relaxed(addr) readq(addr)
+#define writeb_relaxed(b, addr) writeb(b, addr)
+#define writew_relaxed(w, addr) writew(w, addr)
+#define writel_relaxed(l, addr) writel(l, addr)
+#define writeq_relaxed(q, addr) writeq(q, addr)
#define mmiowb() do { } while (0)
#include <asm/errno.h>
#include <asm-generic/uaccess-unaligned.h>
+#include <linux/bug.h>
+
#define VERIFY_READ 0
#define VERIFY_WRITE 1
* that put_user is the same as __put_user, etc.
*/
-extern int __get_kernel_bad(void);
-extern int __get_user_bad(void);
-extern int __put_kernel_bad(void);
-extern int __put_user_bad(void);
-
static inline long access_ok(int type, const void __user * addr,
unsigned long size)
{
#define get_user __get_user
#if !defined(CONFIG_64BIT)
-#define LDD_KERNEL(ptr) __get_kernel_bad();
-#define LDD_USER(ptr) __get_user_bad();
+#define LDD_KERNEL(ptr) BUILD_BUG()
+#define LDD_USER(ptr) BUILD_BUG()
#define STD_KERNEL(x, ptr) __put_kernel_asm64(x,ptr)
#define STD_USER(x, ptr) __put_user_asm64(x,ptr)
#define ASM_WORD_INSN ".word\t"
case 2: __get_kernel_asm("ldh",ptr); break; \
case 4: __get_kernel_asm("ldw",ptr); break; \
case 8: LDD_KERNEL(ptr); break; \
- default: __get_kernel_bad(); break; \
+ default: BUILD_BUG(); break; \
} \
} \
else { \
case 2: __get_user_asm("ldh",ptr); break; \
case 4: __get_user_asm("ldw",ptr); break; \
case 8: LDD_USER(ptr); break; \
- default: __get_user_bad(); break; \
+ default: BUILD_BUG(); break; \
} \
} \
\
case 2: __put_kernel_asm("sth",__x,ptr); break; \
case 4: __put_kernel_asm("stw",__x,ptr); break; \
case 8: STD_KERNEL(__x,ptr); break; \
- default: __put_kernel_bad(); break; \
+ default: BUILD_BUG(); break; \
} \
} \
else { \
case 2: __put_user_asm("sth",__x,ptr); break; \
case 4: __put_user_asm("stw",__x,ptr); break; \
case 8: STD_USER(__x,ptr); break; \
- default: __put_user_bad(); break; \
+ default: BUILD_BUG(); break; \
} \
} \
\
#ifndef __ASM_PARISC_BITSPERLONG_H
#define __ASM_PARISC_BITSPERLONG_H
-/*
- * using CONFIG_* outside of __KERNEL__ is wrong,
- * __LP64__ was also removed from headers, so what
- * is the right approach on parisc?
- * -arnd
- */
-#if (defined(__KERNEL__) && defined(CONFIG_64BIT)) || defined (__LP64__)
+#if defined(__LP64__)
#define __BITS_PER_LONG 64
#define SHIFT_PER_LONG 6
#else
#ifndef _PARISC_MSGBUF_H
#define _PARISC_MSGBUF_H
+#include <asm/bitsperlong.h>
+
/*
* The msqid64_ds structure for parisc architecture, copied from sparc.
* Note extra padding because this structure is passed back and forth
struct msqid64_ds {
struct ipc64_perm msg_perm;
-#ifndef CONFIG_64BIT
+#if __BITS_PER_LONG != 64
unsigned int __pad1;
#endif
__kernel_time_t msg_stime; /* last msgsnd time */
-#ifndef CONFIG_64BIT
+#if __BITS_PER_LONG != 64
unsigned int __pad2;
#endif
__kernel_time_t msg_rtime; /* last msgrcv time */
-#ifndef CONFIG_64BIT
+#if __BITS_PER_LONG != 64
unsigned int __pad3;
#endif
__kernel_time_t msg_ctime; /* last change time */
#ifndef _PARISC_SEMBUF_H
#define _PARISC_SEMBUF_H
+#include <asm/bitsperlong.h>
+
/*
* The semid64_ds structure for parisc architecture.
* Note extra padding because this structure is passed back and forth
struct semid64_ds {
struct ipc64_perm sem_perm; /* permissions .. see ipc.h */
-#ifndef CONFIG_64BIT
+#if __BITS_PER_LONG != 64
unsigned int __pad1;
#endif
__kernel_time_t sem_otime; /* last semop time */
-#ifndef CONFIG_64BIT
+#if __BITS_PER_LONG != 64
unsigned int __pad2;
#endif
__kernel_time_t sem_ctime; /* last change time */
#ifndef _PARISC_SHMBUF_H
#define _PARISC_SHMBUF_H
+#include <asm/bitsperlong.h>
+
/*
* The shmid64_ds structure for parisc architecture.
* Note extra padding because this structure is passed back and forth
struct shmid64_ds {
struct ipc64_perm shm_perm; /* operation perms */
-#ifndef CONFIG_64BIT
+#if __BITS_PER_LONG != 64
unsigned int __pad1;
#endif
__kernel_time_t shm_atime; /* last attach time */
-#ifndef CONFIG_64BIT
+#if __BITS_PER_LONG != 64
unsigned int __pad2;
#endif
__kernel_time_t shm_dtime; /* last detach time */
-#ifndef CONFIG_64BIT
+#if __BITS_PER_LONG != 64
unsigned int __pad3;
#endif
__kernel_time_t shm_ctime; /* last change time */
-#ifndef CONFIG_64BIT
+#if __BITS_PER_LONG != 64
unsigned int __pad4;
#endif
size_t shm_segsz; /* size of segment (bytes) */
unsigned int __unused2;
};
-#ifdef CONFIG_64BIT
-/* The 'unsigned int' (formerly 'unsigned long') data types below will
- * ensure that a 32-bit app calling shmctl(*,IPC_INFO,*) will work on
- * a wide kernel, but if some of these values are meant to contain pointers
- * they may need to be 'long long' instead. -PB XXX FIXME
- */
-#endif
struct shminfo64 {
- unsigned int shmmax;
- unsigned int shmmin;
- unsigned int shmmni;
- unsigned int shmseg;
- unsigned int shmall;
- unsigned int __unused1;
- unsigned int __unused2;
- unsigned int __unused3;
- unsigned int __unused4;
+ unsigned long shmmax;
+ unsigned long shmmin;
+ unsigned long shmmni;
+ unsigned long shmseg;
+ unsigned long shmall;
+ unsigned long __unused1;
+ unsigned long __unused2;
+ unsigned long __unused3;
+ unsigned long __unused4;
};
#endif /* _PARISC_SHMBUF_H */
struct siginfo;
/* Type of a signal handler. */
-#ifdef CONFIG_64BIT
+#if defined(__LP64__)
/* function pointers on 64-bit parisc are pointers to little structs and the
* compiler doesn't support code which changes or tests the address of
* the function in the little struct. This is really ugly -PB
#define __NR_seccomp (__NR_Linux + 338)
#define __NR_getrandom (__NR_Linux + 339)
#define __NR_memfd_create (__NR_Linux + 340)
+#define __NR_bpf (__NR_Linux + 341)
-#define __NR_Linux_syscalls (__NR_memfd_create + 1)
+#define __NR_Linux_syscalls (__NR_bpf + 1)
#define __IGNORE_select /* newselect */
ENTRY_COMP(msgsnd)
ENTRY_COMP(msgrcv)
ENTRY_SAME(msgget) /* 190 */
- ENTRY_SAME(msgctl)
- ENTRY_SAME(shmat)
+ ENTRY_COMP(msgctl)
+ ENTRY_COMP(shmat)
ENTRY_SAME(shmdt)
ENTRY_SAME(shmget)
- ENTRY_SAME(shmctl) /* 195 */
+ ENTRY_COMP(shmctl) /* 195 */
ENTRY_SAME(ni_syscall) /* streams1 */
ENTRY_SAME(ni_syscall) /* streams2 */
ENTRY_SAME(lstat64)
ENTRY_SAME(epoll_ctl) /* 225 */
ENTRY_SAME(epoll_wait)
ENTRY_SAME(remap_file_pages)
- ENTRY_SAME(semtimedop)
+ ENTRY_COMP(semtimedop)
ENTRY_COMP(mq_open)
ENTRY_SAME(mq_unlink) /* 230 */
ENTRY_COMP(mq_timedsend)
ENTRY_SAME(seccomp)
ENTRY_SAME(getrandom)
ENTRY_SAME(memfd_create) /* 340 */
+ ENTRY_SAME(bpf)
/* Nothing yet */
CONFIG_IRQ_ALL_CPUS=y
CONFIG_MEMORY_HOTPLUG=y
CONFIG_MEMORY_HOTREMOVE=y
-CONFIG_CMA=y
CONFIG_PPC_64K_PAGES=y
CONFIG_PPC_SUBPAGE_PROT=y
CONFIG_SCHED_SMT=y
CONFIG_NETPOLL_TRAP=y
CONFIG_TUN=m
CONFIG_VIRTIO_NET=m
+CONFIG_VHOST_NET=m
CONFIG_VORTEX=y
CONFIG_ACENIC=m
CONFIG_ACENIC_OMIT_TIGON_I=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_DEV_NX=y
CONFIG_CRYPTO_DEV_NX_ENCRYPT=m
+CONFIG_VIRTUALIZATION=y
+CONFIG_KVM_BOOK3S_64=m
+CONFIG_KVM_BOOK3S_64_HV=y
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
#define EEH_PE_ISOLATED (1 << 0) /* Isolated PE */
#define EEH_PE_RECOVERING (1 << 1) /* Recovering PE */
-#define EEH_PE_RESET (1 << 2) /* PE reset in progress */
+#define EEH_PE_CFG_BLOCKED (1 << 2) /* Block config access */
#define EEH_PE_KEEP (1 << 8) /* Keep PE on hotplug */
+#define EEH_PE_CFG_RESTRICTED (1 << 9) /* Block config on error */
struct eeh_pe {
int type; /* PE type: PHB/Bus/Device */
#define CPU_UNKNOWN (~((u32)0))
/* Utility macros */
-#define SKIP_TO_NEXT_CPU(reg_entry) \
-({ \
- while (reg_entry->reg_id != REG_ID("CPUEND")) \
- reg_entry++; \
- reg_entry++; \
+#define SKIP_TO_NEXT_CPU(reg_entry) \
+({ \
+ while (be64_to_cpu(reg_entry->reg_id) != REG_ID("CPUEND")) \
+ reg_entry++; \
+ reg_entry++; \
})
/* Kernel Dump section info */
struct fadump_section {
- u32 request_flag;
- u16 source_data_type;
- u16 error_flags;
- u64 source_address;
- u64 source_len;
- u64 bytes_dumped;
- u64 destination_address;
+ __be32 request_flag;
+ __be16 source_data_type;
+ __be16 error_flags;
+ __be64 source_address;
+ __be64 source_len;
+ __be64 bytes_dumped;
+ __be64 destination_address;
};
/* ibm,configure-kernel-dump header. */
struct fadump_section_header {
- u32 dump_format_version;
- u16 dump_num_sections;
- u16 dump_status_flag;
- u32 offset_first_dump_section;
+ __be32 dump_format_version;
+ __be16 dump_num_sections;
+ __be16 dump_status_flag;
+ __be32 offset_first_dump_section;
/* Fields for disk dump option. */
- u32 dd_block_size;
- u64 dd_block_offset;
- u64 dd_num_blocks;
- u32 dd_offset_disk_path;
+ __be32 dd_block_size;
+ __be64 dd_block_offset;
+ __be64 dd_num_blocks;
+ __be32 dd_offset_disk_path;
/* Maximum time allowed to prevent an automatic dump-reboot. */
- u32 max_time_auto;
+ __be32 max_time_auto;
};
/*
/* Register save area header. */
struct fadump_reg_save_area_header {
- u64 magic_number;
- u32 version;
- u32 num_cpu_offset;
+ __be64 magic_number;
+ __be32 version;
+ __be32 num_cpu_offset;
};
/* Register entry. */
struct fadump_reg_entry {
- u64 reg_id;
- u64 reg_value;
+ __be64 reg_id;
+ __be64 reg_value;
};
/* fadump crash info structure */
void flush_dcache_icache_hugepage(struct page *page);
-#if defined(CONFIG_PPC_MM_SLICES) || defined(CONFIG_PPC_SUBPAGE_PROT)
+#if defined(CONFIG_PPC_MM_SLICES)
int is_hugepage_only_range(struct mm_struct *mm, unsigned long addr,
unsigned long len);
#else
/*
* We don't do relaxed operations yet, at least not with this semantic
*/
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
-#define readq_relaxed(addr) readq(addr)
+#define readb_relaxed(addr) readb(addr)
+#define readw_relaxed(addr) readw(addr)
+#define readl_relaxed(addr) readl(addr)
+#define readq_relaxed(addr) readq(addr)
+#define writeb_relaxed(v, addr) writeb(v, addr)
+#define writew_relaxed(v, addr) writew(v, addr)
+#define writel_relaxed(v, addr) writel(v, addr)
+#define writeq_relaxed(v, addr) writeq(v, addr)
#ifdef CONFIG_PPC32
#define mmiowb()
iommu_add_device(dev);
}
-extern int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
- struct scatterlist *sglist, int nelems,
- unsigned long mask, enum dma_data_direction direction,
- struct dma_attrs *attrs);
-extern void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist,
- int nelems, enum dma_data_direction direction,
- struct dma_attrs *attrs);
+extern int ppc_iommu_map_sg(struct device *dev, struct iommu_table *tbl,
+ struct scatterlist *sglist, int nelems,
+ unsigned long mask,
+ enum dma_data_direction direction,
+ struct dma_attrs *attrs);
+extern void ppc_iommu_unmap_sg(struct iommu_table *tbl,
+ struct scatterlist *sglist,
+ int nelems,
+ enum dma_data_direction direction,
+ struct dma_attrs *attrs);
extern void *iommu_alloc_coherent(struct device *dev, struct iommu_table *tbl,
size_t size, dma_addr_t *dma_handle,
int pci_ext_config_space; /* for pci devices */
- bool force_32bit_msi;
-
struct pci_dev *pcidev; /* back-pointer to the pci device */
#ifdef CONFIG_EEH
struct eeh_dev *edev; /* eeh device */
do { \
(regs)->result = 0; \
(regs)->nip = __ip; \
- (regs)->gpr[1] = *(unsigned long *)__get_SP(); \
+ (regs)->gpr[1] = current_stack_pointer(); \
asm volatile("mfmsr %0" : "=r" ((regs)->msr)); \
} while (0)
#endif
#ifdef __KERNEL__
#include <linux/mm.h>
-#include <asm-generic/tlb.h>
#ifdef CONFIG_PPC_BOOK3E
extern void tlb_flush_pgtable(struct mmu_gather *tlb, unsigned long address);
}
#endif /* !CONFIG_PPC_BOOK3E */
+extern void tlb_remove_table(struct mmu_gather *tlb, void *table);
+
#ifdef CONFIG_PPC64
#include <asm/pgalloc-64.h>
#else
#define proc_trap() asm volatile("trap")
-#define __get_SP() ({unsigned long sp; \
- asm volatile("mr %0,1": "=r" (sp)); sp;})
+extern unsigned long current_stack_pointer(void);
extern unsigned long scom970_read(unsigned int address);
extern void scom970_write(unsigned int address, unsigned long value);
/* ftrace syscalls requires exporting the sys_call_table */
#ifdef CONFIG_FTRACE_SYSCALLS
-extern const unsigned long *sys_call_table;
+extern const unsigned long sys_call_table[];
#endif /* CONFIG_FTRACE_SYSCALLS */
static inline long syscall_get_nr(struct task_struct *task,
SYSCALL_SPU(seccomp)
SYSCALL_SPU(getrandom)
SYSCALL_SPU(memfd_create)
+SYSCALL_SPU(bpf)
#define tlb_start_vma(tlb, vma) do { } while (0)
#define tlb_end_vma(tlb, vma) do { } while (0)
+#define __tlb_remove_tlb_entry __tlb_remove_tlb_entry
extern void tlb_flush(struct mmu_gather *tlb);
#include <uapi/asm/unistd.h>
-#define __NR_syscalls 361
+#define __NR_syscalls 362
#define __NR__exit __NR_exit
#define NR_syscalls __NR_syscalls
#define __NR_seccomp 358
#define __NR_getrandom 359
#define __NR_memfd_create 360
+#define __NR_bpf 361
#endif /* _UAPI_ASM_POWERPC_UNISTD_H_ */
int nelems, enum dma_data_direction direction,
struct dma_attrs *attrs)
{
- return iommu_map_sg(dev, get_iommu_table_base(dev), sglist, nelems,
- device_to_mask(dev), direction, attrs);
+ return ppc_iommu_map_sg(dev, get_iommu_table_base(dev), sglist, nelems,
+ device_to_mask(dev), direction, attrs);
}
static void dma_iommu_unmap_sg(struct device *dev, struct scatterlist *sglist,
int nelems, enum dma_data_direction direction,
struct dma_attrs *attrs)
{
- iommu_unmap_sg(get_iommu_table_base(dev), sglist, nelems, direction,
- attrs);
+ ppc_iommu_unmap_sg(get_iommu_table_base(dev), sglist, nelems,
+ direction, attrs);
}
/* We support DMA to/from any memory page via the iommu */
#else
struct page *page;
int node = dev_to_node(dev);
+#ifdef CONFIG_FSL_SOC
u64 pfn = get_pfn_limit(dev);
int zone;
+ /*
+ * This code should be OK on other platforms, but we have drivers that
+ * don't set coherent_dma_mask. As a workaround we just ifdef it. This
+ * whole routine needs some serious cleanup.
+ */
+
zone = dma_pfn_limit_to_zone(pfn);
if (zone < 0) {
dev_err(dev, "%s: No suitable zone for pfn %#llx\n",
break;
#endif
};
+#endif /* CONFIG_FSL_SOC */
/* ignore region specifiers */
flag &= ~(__GFP_HIGHMEM);
struct eeh_dev *edev, *tmp;
size_t *plen = flag;
+ /* If the PE's config space is blocked, 0xFF's will be
+ * returned. It's pointless to collect the log in this
+ * case.
+ */
+ if (pe->state & EEH_PE_CFG_BLOCKED)
+ return NULL;
+
eeh_pe_for_each_dev(pe, edev, tmp)
*plen += eeh_dump_dev_log(edev, pci_regs_buf + *plen,
EEH_PCI_REGS_LOG_LEN - *plen);
switch (state) {
case pcie_deassert_reset:
eeh_ops->reset(pe, EEH_RESET_DEACTIVATE);
- eeh_pe_state_clear(pe, EEH_PE_RESET);
+ eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED);
break;
case pcie_hot_reset:
- eeh_pe_state_mark(pe, EEH_PE_RESET);
+ eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
eeh_ops->reset(pe, EEH_RESET_HOT);
break;
case pcie_warm_reset:
- eeh_pe_state_mark(pe, EEH_PE_RESET);
+ eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
eeh_ops->reset(pe, EEH_RESET_FUNDAMENTAL);
break;
default:
- eeh_pe_state_clear(pe, EEH_PE_RESET);
+ eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED);
return -EINVAL;
};
switch (option) {
case EEH_RESET_DEACTIVATE:
ret = eeh_ops->reset(pe, option);
- eeh_pe_state_clear(pe, EEH_PE_RESET);
+ eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED);
if (ret)
break;
*/
eeh_ops->set_option(pe, EEH_OPT_FREEZE_PE);
- eeh_pe_state_mark(pe, EEH_PE_RESET);
+ eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
ret = eeh_ops->reset(pe, option);
break;
default:
eeh_pe_dev_traverse(pe, eeh_report_error, &result);
/* Issue reset */
- eeh_pe_state_mark(pe, EEH_PE_RESET);
+ eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
ret = eeh_reset_pe(pe);
if (ret) {
- eeh_pe_state_clear(pe, EEH_PE_RECOVERING | EEH_PE_RESET);
+ eeh_pe_state_clear(pe, EEH_PE_RECOVERING | EEH_PE_CFG_BLOCKED);
return ret;
}
- eeh_pe_state_clear(pe, EEH_PE_RESET);
+ eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED);
/* Unfreeze the PE */
ret = eeh_clear_pe_frozen_state(pe, true);
* config accesses. So we prefer to block them. However, controlled
* PCI config accesses initiated from EEH itself are allowed.
*/
- eeh_pe_state_mark(pe, EEH_PE_RESET);
+ eeh_pe_state_mark(pe, EEH_PE_CFG_BLOCKED);
rc = eeh_reset_pe(pe);
if (rc) {
- eeh_pe_state_clear(pe, EEH_PE_RESET);
+ eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED);
return rc;
}
/* Restore PE */
eeh_ops->configure_bridge(pe);
eeh_pe_restore_bars(pe);
- eeh_pe_state_clear(pe, EEH_PE_RESET);
+ eeh_pe_state_clear(pe, EEH_PE_CFG_BLOCKED);
/* Clear frozen state */
rc = eeh_clear_pe_frozen_state(pe, false);
pe->state |= state;
/* Offline PCI devices if applicable */
- if (state != EEH_PE_ISOLATED)
+ if (!(state & EEH_PE_ISOLATED))
return NULL;
eeh_pe_for_each_dev(pe, edev, tmp) {
pdev->error_state = pci_channel_io_frozen;
}
+ /* Block PCI config access if required */
+ if (pe->state & EEH_PE_CFG_RESTRICTED)
+ pe->state |= EEH_PE_CFG_BLOCKED;
+
return NULL;
}
pdev->error_state = pci_channel_io_normal;
}
+ /* Unblock PCI config access if required */
+ if (pe->state & EEH_PE_CFG_RESTRICTED)
+ pe->state &= ~EEH_PE_CFG_BLOCKED;
+
return NULL;
}
return -ENODEV;
state = eeh_ops->get_state(edev->pe, NULL);
- return sprintf(buf, "%0x08x %0x08x\n",
+ return sprintf(buf, "0x%08x 0x%08x\n",
state, edev->pe->state);
}
3:
#endif
bl save_nvgprs
+ /*
+ * Use a non volatile GPR to save and restore our thread_info flags
+ * across the call to restore_interrupts.
+ */
+ mr r30,r4
bl restore_interrupts
+ mr r4,r30
addi r3,r1,STACK_FRAME_OVERHEAD
bl do_notify_resume
b ret_from_except
addi r3,r1,STACK_FRAME_OVERHEAD
bl hmi_exception_realmode
/* Windup the stack. */
- /* Clear MSR_RI before setting SRR0 and SRR1. */
- li r0,MSR_RI
- mfmsr r9 /* get MSR value */
- andc r9,r9,r0
- mtmsrd r9,1 /* Clear MSR_RI */
/* Move original HSRR0 and HSRR1 into the respective regs */
ld r9,_MSR(r1)
mtspr SPRN_HSRR1,r9
const __be32 *sections;
int i, num_sections;
int size;
- const int *token;
+ const __be32 *token;
if (depth != 1 || strcmp(uname, "rtas") != 0)
return 0;
return 1;
fw_dump.fadump_supported = 1;
- fw_dump.ibm_configure_kernel_dump = *token;
+ fw_dump.ibm_configure_kernel_dump = be32_to_cpu(*token);
/*
* The 'ibm,kernel-dump' rtas node is present only if there is
memset(fdm, 0, sizeof(struct fadump_mem_struct));
addr = addr & PAGE_MASK;
- fdm->header.dump_format_version = 0x00000001;
- fdm->header.dump_num_sections = 3;
+ fdm->header.dump_format_version = cpu_to_be32(0x00000001);
+ fdm->header.dump_num_sections = cpu_to_be16(3);
fdm->header.dump_status_flag = 0;
fdm->header.offset_first_dump_section =
- (u32)offsetof(struct fadump_mem_struct, cpu_state_data);
+ cpu_to_be32((u32)offsetof(struct fadump_mem_struct, cpu_state_data));
/*
* Fields for disk dump option.
/* Kernel dump sections */
/* cpu state data section. */
- fdm->cpu_state_data.request_flag = FADUMP_REQUEST_FLAG;
- fdm->cpu_state_data.source_data_type = FADUMP_CPU_STATE_DATA;
+ fdm->cpu_state_data.request_flag = cpu_to_be32(FADUMP_REQUEST_FLAG);
+ fdm->cpu_state_data.source_data_type = cpu_to_be16(FADUMP_CPU_STATE_DATA);
fdm->cpu_state_data.source_address = 0;
- fdm->cpu_state_data.source_len = fw_dump.cpu_state_data_size;
- fdm->cpu_state_data.destination_address = addr;
+ fdm->cpu_state_data.source_len = cpu_to_be64(fw_dump.cpu_state_data_size);
+ fdm->cpu_state_data.destination_address = cpu_to_be64(addr);
addr += fw_dump.cpu_state_data_size;
/* hpte region section */
- fdm->hpte_region.request_flag = FADUMP_REQUEST_FLAG;
- fdm->hpte_region.source_data_type = FADUMP_HPTE_REGION;
+ fdm->hpte_region.request_flag = cpu_to_be32(FADUMP_REQUEST_FLAG);
+ fdm->hpte_region.source_data_type = cpu_to_be16(FADUMP_HPTE_REGION);
fdm->hpte_region.source_address = 0;
- fdm->hpte_region.source_len = fw_dump.hpte_region_size;
- fdm->hpte_region.destination_address = addr;
+ fdm->hpte_region.source_len = cpu_to_be64(fw_dump.hpte_region_size);
+ fdm->hpte_region.destination_address = cpu_to_be64(addr);
addr += fw_dump.hpte_region_size;
/* RMA region section */
- fdm->rmr_region.request_flag = FADUMP_REQUEST_FLAG;
- fdm->rmr_region.source_data_type = FADUMP_REAL_MODE_REGION;
- fdm->rmr_region.source_address = RMA_START;
- fdm->rmr_region.source_len = fw_dump.boot_memory_size;
- fdm->rmr_region.destination_address = addr;
+ fdm->rmr_region.request_flag = cpu_to_be32(FADUMP_REQUEST_FLAG);
+ fdm->rmr_region.source_data_type = cpu_to_be16(FADUMP_REAL_MODE_REGION);
+ fdm->rmr_region.source_address = cpu_to_be64(RMA_START);
+ fdm->rmr_region.source_len = cpu_to_be64(fw_dump.boot_memory_size);
+ fdm->rmr_region.destination_address = cpu_to_be64(addr);
addr += fw_dump.boot_memory_size;
return addr;
* first kernel.
*/
if (fdm_active)
- fw_dump.boot_memory_size = fdm_active->rmr_region.source_len;
+ fw_dump.boot_memory_size = be64_to_cpu(fdm_active->rmr_region.source_len);
else
fw_dump.boot_memory_size = fadump_calculate_reserve_size();
(unsigned long)(base >> 20));
fw_dump.fadumphdr_addr =
- fdm_active->rmr_region.destination_address +
- fdm_active->rmr_region.source_len;
+ be64_to_cpu(fdm_active->rmr_region.destination_address) +
+ be64_to_cpu(fdm_active->rmr_region.source_len);
pr_debug("fadumphdr_addr = %p\n",
(void *) fw_dump.fadumphdr_addr);
} else {
{
memset(regs, 0, sizeof(struct pt_regs));
- while (reg_entry->reg_id != REG_ID("CPUEND")) {
- fadump_set_regval(regs, reg_entry->reg_id,
- reg_entry->reg_value);
+ while (be64_to_cpu(reg_entry->reg_id) != REG_ID("CPUEND")) {
+ fadump_set_regval(regs, be64_to_cpu(reg_entry->reg_id),
+ be64_to_cpu(reg_entry->reg_value));
reg_entry++;
}
reg_entry++;
if (!fdm->cpu_state_data.bytes_dumped)
return -EINVAL;
- addr = fdm->cpu_state_data.destination_address;
+ addr = be64_to_cpu(fdm->cpu_state_data.destination_address);
vaddr = __va(addr);
reg_header = vaddr;
- if (reg_header->magic_number != REGSAVE_AREA_MAGIC) {
+ if (be64_to_cpu(reg_header->magic_number) != REGSAVE_AREA_MAGIC) {
printk(KERN_ERR "Unable to read register save area.\n");
return -ENOENT;
}
pr_debug("--------CPU State Data------------\n");
- pr_debug("Magic Number: %llx\n", reg_header->magic_number);
- pr_debug("NumCpuOffset: %x\n", reg_header->num_cpu_offset);
+ pr_debug("Magic Number: %llx\n", be64_to_cpu(reg_header->magic_number));
+ pr_debug("NumCpuOffset: %x\n", be32_to_cpu(reg_header->num_cpu_offset));
- vaddr += reg_header->num_cpu_offset;
- num_cpus = *((u32 *)(vaddr));
+ vaddr += be32_to_cpu(reg_header->num_cpu_offset);
+ num_cpus = be32_to_cpu(*((__be32 *)(vaddr)));
pr_debug("NumCpus : %u\n", num_cpus);
vaddr += sizeof(u32);
reg_entry = (struct fadump_reg_entry *)vaddr;
fdh = __va(fw_dump.fadumphdr_addr);
for (i = 0; i < num_cpus; i++) {
- if (reg_entry->reg_id != REG_ID("CPUSTRT")) {
+ if (be64_to_cpu(reg_entry->reg_id) != REG_ID("CPUSTRT")) {
printk(KERN_ERR "Unable to read CPU state data\n");
rc = -ENOENT;
goto error_out;
}
/* Lower 4 bytes of reg_value contains logical cpu id */
- cpu = reg_entry->reg_value & FADUMP_CPU_ID_MASK;
+ cpu = be64_to_cpu(reg_entry->reg_value) & FADUMP_CPU_ID_MASK;
if (fdh && !cpumask_test_cpu(cpu, &fdh->cpu_online_mask)) {
SKIP_TO_NEXT_CPU(reg_entry);
continue;
return -EINVAL;
/* Check if the dump data is valid. */
- if ((fdm_active->header.dump_status_flag == FADUMP_ERROR_FLAG) ||
+ if ((be16_to_cpu(fdm_active->header.dump_status_flag) == FADUMP_ERROR_FLAG) ||
(fdm_active->cpu_state_data.error_flags != 0) ||
(fdm_active->rmr_region.error_flags != 0)) {
printk(KERN_ERR "Dump taken by platform is not valid\n");
static inline unsigned long fadump_relocate(unsigned long paddr)
{
if (paddr > RMA_START && paddr < fw_dump.boot_memory_size)
- return fdm.rmr_region.destination_address + paddr;
+ return be64_to_cpu(fdm.rmr_region.destination_address) + paddr;
else
return paddr;
}
* to the specified destination_address. Hence set
* the correct offset.
*/
- phdr->p_offset = fdm.rmr_region.destination_address;
+ phdr->p_offset = be64_to_cpu(fdm.rmr_region.destination_address);
}
phdr->p_paddr = mbase;
fadump_setup_crash_memory_ranges();
- addr = fdm.rmr_region.destination_address + fdm.rmr_region.source_len;
+ addr = be64_to_cpu(fdm.rmr_region.destination_address) + be64_to_cpu(fdm.rmr_region.source_len);
/* Initialize fadump crash info header. */
addr = init_fadump_header(addr);
vaddr = __va(addr);
/* Invalidate the registration only if dump is active. */
if (fw_dump.dump_active) {
init_fadump_mem_struct(&fdm,
- fdm_active->cpu_state_data.destination_address);
+ be64_to_cpu(fdm_active->cpu_state_data.destination_address));
fadump_invalidate_dump(&fdm);
}
}
return;
}
- destination_address = fdm_active->cpu_state_data.destination_address;
+ destination_address = be64_to_cpu(fdm_active->cpu_state_data.destination_address);
fadump_cleanup();
mutex_unlock(&fadump_mutex);
seq_printf(m,
"CPU : [%#016llx-%#016llx] %#llx bytes, "
"Dumped: %#llx\n",
- fdm_ptr->cpu_state_data.destination_address,
- fdm_ptr->cpu_state_data.destination_address +
- fdm_ptr->cpu_state_data.source_len - 1,
- fdm_ptr->cpu_state_data.source_len,
- fdm_ptr->cpu_state_data.bytes_dumped);
+ be64_to_cpu(fdm_ptr->cpu_state_data.destination_address),
+ be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) +
+ be64_to_cpu(fdm_ptr->cpu_state_data.source_len) - 1,
+ be64_to_cpu(fdm_ptr->cpu_state_data.source_len),
+ be64_to_cpu(fdm_ptr->cpu_state_data.bytes_dumped));
seq_printf(m,
"HPTE: [%#016llx-%#016llx] %#llx bytes, "
"Dumped: %#llx\n",
- fdm_ptr->hpte_region.destination_address,
- fdm_ptr->hpte_region.destination_address +
- fdm_ptr->hpte_region.source_len - 1,
- fdm_ptr->hpte_region.source_len,
- fdm_ptr->hpte_region.bytes_dumped);
+ be64_to_cpu(fdm_ptr->hpte_region.destination_address),
+ be64_to_cpu(fdm_ptr->hpte_region.destination_address) +
+ be64_to_cpu(fdm_ptr->hpte_region.source_len) - 1,
+ be64_to_cpu(fdm_ptr->hpte_region.source_len),
+ be64_to_cpu(fdm_ptr->hpte_region.bytes_dumped));
seq_printf(m,
"DUMP: [%#016llx-%#016llx] %#llx bytes, "
"Dumped: %#llx\n",
- fdm_ptr->rmr_region.destination_address,
- fdm_ptr->rmr_region.destination_address +
- fdm_ptr->rmr_region.source_len - 1,
- fdm_ptr->rmr_region.source_len,
- fdm_ptr->rmr_region.bytes_dumped);
+ be64_to_cpu(fdm_ptr->rmr_region.destination_address),
+ be64_to_cpu(fdm_ptr->rmr_region.destination_address) +
+ be64_to_cpu(fdm_ptr->rmr_region.source_len) - 1,
+ be64_to_cpu(fdm_ptr->rmr_region.source_len),
+ be64_to_cpu(fdm_ptr->rmr_region.bytes_dumped));
if (!fdm_active ||
(fw_dump.reserve_dump_area_start ==
- fdm_ptr->cpu_state_data.destination_address))
+ be64_to_cpu(fdm_ptr->cpu_state_data.destination_address)))
goto out;
/* Dump is active. Show reserved memory region. */
" : [%#016llx-%#016llx] %#llx bytes, "
"Dumped: %#llx\n",
(unsigned long long)fw_dump.reserve_dump_area_start,
- fdm_ptr->cpu_state_data.destination_address - 1,
- fdm_ptr->cpu_state_data.destination_address -
+ be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) - 1,
+ be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) -
fw_dump.reserve_dump_area_start,
- fdm_ptr->cpu_state_data.destination_address -
+ be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) -
fw_dump.reserve_dump_area_start);
out:
if (fdm_active)
ppc_md.tce_flush(tbl);
}
-int iommu_map_sg(struct device *dev, struct iommu_table *tbl,
- struct scatterlist *sglist, int nelems,
- unsigned long mask, enum dma_data_direction direction,
- struct dma_attrs *attrs)
+int ppc_iommu_map_sg(struct device *dev, struct iommu_table *tbl,
+ struct scatterlist *sglist, int nelems,
+ unsigned long mask, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
dma_addr_t dma_next = 0, dma_addr;
struct scatterlist *s, *outs, *segstart;
DBG("mapped %d elements:\n", outcount);
- /* For the sake of iommu_unmap_sg, we clear out the length in the
+ /* For the sake of ppc_iommu_unmap_sg, we clear out the length in the
* next entry of the sglist if we didn't fill the list completely
*/
if (outcount < incount) {
}
-void iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist,
- int nelems, enum dma_data_direction direction,
- struct dma_attrs *attrs)
+void ppc_iommu_unmap_sg(struct iommu_table *tbl, struct scatterlist *sglist,
+ int nelems, enum dma_data_direction direction,
+ struct dma_attrs *attrs)
{
struct scatterlist *sg;
#ifdef CONFIG_DEBUG_STACKOVERFLOW
long sp;
- sp = __get_SP() & (THREAD_SIZE-1);
+ sp = current_stack_pointer() & (THREAD_SIZE-1);
/* check for stack overflow: is there less than 2KB free? */
if (unlikely(sp < (sizeof(struct thread_info) + 2048))) {
mtlr r0
mr r3,r4
blr
+
+_GLOBAL(current_stack_pointer)
+ PPC_LL r3,0(r1)
+ blr
}
EXPORT_SYMBOL(pcibus_to_node);
#endif
-
-static void quirk_radeon_32bit_msi(struct pci_dev *dev)
-{
- struct pci_dn *pdn = pci_get_pdn(dev);
-
- if (pdn)
- pdn->force_32bit_msi = true;
-}
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0x68f2, quirk_radeon_32bit_msi);
-DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_ATI, 0xaa68, quirk_radeon_32bit_msi);
#ifdef CONFIG_EPAPR_PARAVIRT
EXPORT_SYMBOL(epapr_hypercall_start);
#endif
+
+EXPORT_SYMBOL(current_stack_pointer);
tsk = current;
if (sp == 0) {
if (tsk == current)
- asm("mr %0,1" : "=r" (sp));
+ sp = current_stack_pointer();
else
sp = tsk->thread.ksp;
}
return PCIBIOS_DEVICE_NOT_FOUND;
if (!config_access_valid(pdn, where))
return PCIBIOS_BAD_REGISTER_NUMBER;
+#ifdef CONFIG_EEH
+ if (pdn->edev && pdn->edev->pe &&
+ (pdn->edev->pe->state & EEH_PE_CFG_BLOCKED))
+ return PCIBIOS_SET_FAILED;
+#endif
addr = rtas_config_addr(pdn->busno, pdn->devfn, where);
buid = pdn->phb->buid;
struct device_node *busdn, *dn;
struct pci_dn *pdn;
bool found = false;
-#ifdef CONFIG_EEH
- struct eeh_dev *edev;
-#endif
int ret;
/* Search only direct children of the bus */
if (!found)
return PCIBIOS_DEVICE_NOT_FOUND;
-#ifdef CONFIG_EEH
- edev = of_node_to_eeh_dev(dn);
- if (edev && edev->pe && edev->pe->state & EEH_PE_RESET)
- return PCIBIOS_DEVICE_NOT_FOUND;
-#endif
ret = rtas_read_config(pdn, where, size, val);
if (*val == EEH_IO_ERROR_VALUE(size) &&
return PCIBIOS_DEVICE_NOT_FOUND;
if (!config_access_valid(pdn, where))
return PCIBIOS_BAD_REGISTER_NUMBER;
+#ifdef CONFIG_EEH
+ if (pdn->edev && pdn->edev->pe &&
+ (pdn->edev->pe->state & EEH_PE_CFG_BLOCKED))
+ return PCIBIOS_SET_FAILED;
+#endif
addr = rtas_config_addr(pdn->busno, pdn->devfn, where);
buid = pdn->phb->buid;
struct device_node *busdn, *dn;
struct pci_dn *pdn;
bool found = false;
-#ifdef CONFIG_EEH
- struct eeh_dev *edev;
-#endif
- int ret;
/* Search only direct children of the bus */
busdn = pci_bus_to_OF_node(bus);
if (!found)
return PCIBIOS_DEVICE_NOT_FOUND;
-#ifdef CONFIG_EEH
- edev = of_node_to_eeh_dev(dn);
- if (edev && edev->pe && (edev->pe->state & EEH_PE_RESET))
- return PCIBIOS_DEVICE_NOT_FOUND;
-#endif
- ret = rtas_write_config(pdn, where, size, val);
- return ret;
+ return rtas_write_config(pdn, where, size, val);
}
static struct pci_ops rtas_pci_ops = {
smp_release_cpus();
#endif
- printk("Starting Linux PPC64 %s\n", init_utsname()->version);
+ pr_info("Starting Linux PPC64 %s\n", init_utsname()->version);
- printk("-----------------------------------------------------\n");
- printk("ppc64_pft_size = 0x%llx\n", ppc64_pft_size);
- printk("phys_mem_size = 0x%llx\n", memblock_phys_mem_size());
+ pr_info("-----------------------------------------------------\n");
+ pr_info("ppc64_pft_size = 0x%llx\n", ppc64_pft_size);
+ pr_info("phys_mem_size = 0x%llx\n", memblock_phys_mem_size());
if (ppc64_caches.dline_size != 0x80)
- printk("dcache_line_size = 0x%x\n", ppc64_caches.dline_size);
+ pr_info("dcache_line_size = 0x%x\n", ppc64_caches.dline_size);
if (ppc64_caches.iline_size != 0x80)
- printk("icache_line_size = 0x%x\n", ppc64_caches.iline_size);
+ pr_info("icache_line_size = 0x%x\n", ppc64_caches.iline_size);
- printk("cpu_features = 0x%016lx\n", cur_cpu_spec->cpu_features);
- printk(" possible = 0x%016lx\n", CPU_FTRS_POSSIBLE);
- printk(" always = 0x%016lx\n", CPU_FTRS_ALWAYS);
- printk("cpu_user_features = 0x%08x 0x%08x\n", cur_cpu_spec->cpu_user_features,
+ pr_info("cpu_features = 0x%016lx\n", cur_cpu_spec->cpu_features);
+ pr_info(" possible = 0x%016lx\n", CPU_FTRS_POSSIBLE);
+ pr_info(" always = 0x%016lx\n", CPU_FTRS_ALWAYS);
+ pr_info("cpu_user_features = 0x%08x 0x%08x\n", cur_cpu_spec->cpu_user_features,
cur_cpu_spec->cpu_user_features2);
- printk("mmu_features = 0x%08x\n", cur_cpu_spec->mmu_features);
- printk("firmware_features = 0x%016lx\n", powerpc_firmware_features);
+ pr_info("mmu_features = 0x%08x\n", cur_cpu_spec->mmu_features);
+ pr_info("firmware_features = 0x%016lx\n", powerpc_firmware_features);
#ifdef CONFIG_PPC_STD_MMU_64
if (htab_address)
- printk("htab_address = 0x%p\n", htab_address);
+ pr_info("htab_address = 0x%p\n", htab_address);
- printk("htab_hash_mask = 0x%lx\n", htab_hash_mask);
+ pr_info("htab_hash_mask = 0x%lx\n", htab_hash_mask);
#endif
if (PHYSICAL_START > 0)
- printk("physical_start = 0x%llx\n",
+ pr_info("physical_start = 0x%llx\n",
(unsigned long long)PHYSICAL_START);
- printk("-----------------------------------------------------\n");
+ pr_info("-----------------------------------------------------\n");
DBG(" <- setup_system()\n");
}
{
unsigned long sp;
- asm("mr %0,1" : "=r" (sp));
+ sp = current_stack_pointer();
save_context_stack(trace, sp, current, 1);
}
V_FUNCTION_BEGIN(__kernel_getcpu)
.cfi_startproc
mfspr r5,SPRN_SPRG_VDSO_READ
- cmpdi cr0,r3,0
- cmpdi cr1,r4,0
+ cmpwi cr0,r3,0
+ cmpwi cr1,r4,0
clrlwi r6,r5,16
rlwinm r7,r5,16,31-15,31-0
beq cr0,1f
u64 vsid;
int psize, ssize;
- slb->esid = (ea & ESID_MASK) | SLB_ESID_V;
-
switch (REGION_ID(ea)) {
case USER_REGION_ID:
pr_devel("%s: 0x%llx -- USER_REGION_ID\n", __func__, ea);
vsid |= mmu_psize_defs[psize].sllp |
((ssize == MMU_SEGSIZE_1T) ? SLB_VSID_B_1T : 0);
+ slb->esid = (ea & (ssize == MMU_SEGSIZE_1T ? ESID_MASK_1T : ESID_MASK)) | SLB_ESID_V;
slb->vsid = vsid;
return 0;
for (i = 0; i < num_hugepd; i++, hpdp++)
hpdp->pd = 0;
- tlb->need_flush = 1;
-
#ifdef CONFIG_PPC_FSL_BOOK3E
hugepd_free(tlb, hugepte);
#else
/*
* Check for command-line options that affect what MMU_init will do.
*/
-void MMU_setup(void)
+void __init MMU_setup(void)
{
/* Check for nobats option (used in mapin_ram). */
if (strstr(boot_command_line, "nobats")) {
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
+#define pr_fmt(fmt) "numa: " fmt
+
#include <linux/threads.h>
#include <linux/bootmem.h>
#include <linux/init.h>
}
early_param("numa", early_numa);
+static bool topology_updates_enabled = true;
+
+static int __init early_topology_updates(char *p)
+{
+ if (!p)
+ return 0;
+
+ if (!strcmp(p, "off")) {
+ pr_info("Disabling topology updates\n");
+ topology_updates_enabled = false;
+ }
+
+ return 0;
+}
+early_param("topology_updates", early_topology_updates);
+
#ifdef CONFIG_MEMORY_HOTPLUG
/*
* Find the node associated with a hot added memory section for
long retbuf[PLPAR_HCALL9_BUFSIZE] = {0};
u64 flags = 1;
int hwcpu = get_hard_smp_processor_id(cpu);
+ int i;
rc = plpar_hcall9(H_HOME_NODE_ASSOCIATIVITY, retbuf, flags, hwcpu);
+ for (i = 0; i < 6; i++)
+ retbuf[i] = cpu_to_be64(retbuf[i]);
vphn_unpack_associativity(retbuf, associativity);
return rc;
cpu = smp_processor_id();
for (update = data; update; update = update->next) {
+ int new_nid = update->new_nid;
if (cpu != update->cpu)
continue;
- unmap_cpu_from_node(update->cpu);
- map_cpu_to_node(update->cpu, update->new_nid);
+ unmap_cpu_from_node(cpu);
+ map_cpu_to_node(cpu, new_nid);
+ set_cpu_numa_node(cpu, new_nid);
+ set_cpu_numa_mem(cpu, local_memory_node(new_nid));
vdso_getcpu_init();
}
struct device *dev;
int weight, new_nid, i = 0;
+ if (!prrn_enabled && !vphn_enabled)
+ return 0;
+
weight = cpumask_weight(&cpu_associativity_changes_mask);
if (!weight)
return 0;
cpu = cpu_last_thread_sibling(cpu);
}
+ pr_debug("Topology update for the following CPUs:\n");
+ if (cpumask_weight(&updated_cpus)) {
+ for (ud = &updates[0]; ud; ud = ud->next) {
+ pr_debug("cpu %d moving from node %d "
+ "to %d\n", ud->cpu,
+ ud->old_nid, ud->new_nid);
+ }
+ }
+
/*
* In cases where we have nothing to update (because the updates list
* is too short or because the new topology is same as the old one),
static int topology_update_init(void)
{
- start_topology_update();
- proc_create("powerpc/topology_updates", 0644, NULL, &topology_ops);
+ /* Do not poll for changes if disabled at boot */
+ if (topology_updates_enabled)
+ start_topology_update();
+
+ if (!proc_create("powerpc/topology_updates", 0644, NULL, &topology_ops))
+ return -ENOMEM;
return 0;
}
slice_convert(mm, mask, psize);
}
+#ifdef CONFIG_HUGETLB_PAGE
/*
* is_hugepage_only_range() is used by generic code to verify whether
* a normal mmap mapping (non hugetlbfs) is valid on a given area.
#endif
return !slice_check_fit(mask, available);
}
-
+#endif
return 0;
}
-static int h_24x7_event_idx(struct perf_event *event)
-{
- return 0;
-}
-
static struct pmu h_24x7_pmu = {
.task_ctx_nr = perf_invalid_context,
.start = h_24x7_event_start,
.stop = h_24x7_event_stop,
.read = h_24x7_event_update,
- .event_idx = h_24x7_event_idx,
};
static int hv_24x7_init(void)
return 0;
}
-static int h_gpci_event_idx(struct perf_event *event)
-{
- return 0;
-}
-
static struct pmu h_gpci_pmu = {
.task_ctx_nr = perf_invalid_context,
.start = h_gpci_event_start,
.stop = h_gpci_event_stop,
.read = h_gpci_event_update,
- .event_idx = h_gpci_event_idx,
};
static int hv_gpci_init(void)
if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
return dma_direct_ops.map_sg(dev, sg, nents, direction, attrs);
else
- return iommu_map_sg(dev, cell_get_iommu_table(dev), sg, nents,
- device_to_mask(dev), direction, attrs);
+ return ppc_iommu_map_sg(dev, cell_get_iommu_table(dev), sg,
+ nents, device_to_mask(dev),
+ direction, attrs);
}
static void dma_fixed_unmap_sg(struct device *dev, struct scatterlist *sg,
if (iommu_fixed_is_weak == dma_get_attr(DMA_ATTR_WEAK_ORDERING, attrs))
dma_direct_ops.unmap_sg(dev, sg, nents, direction, attrs);
else
- iommu_unmap_sg(cell_get_iommu_table(dev), sg, nents, direction,
- attrs);
+ ppc_iommu_unmap_sg(cell_get_iommu_table(dev), sg, nents,
+ direction, attrs);
}
static int dma_fixed_dma_supported(struct device *dev, u64 mask)
* moving forward, we have to return operational
* state during PE reset.
*/
- if (pe->state & EEH_PE_RESET) {
+ if (pe->state & EEH_PE_CFG_BLOCKED) {
result = (EEH_STATE_MMIO_ACTIVE |
EEH_STATE_DMA_ACTIVE |
EEH_STATE_MMIO_ENABLED |
return ret;
}
+ /*
+ * If the PE contains any one of following adapters, the
+ * PCI config space can't be accessed when dumping EEH log.
+ * Otherwise, we will run into fenced PHB caused by shortage
+ * of outbound credits in the adapter. The PCI config access
+ * should be blocked until PE reset. MMIO access is dropped
+ * by hardware certainly. In order to drop PCI config requests,
+ * one more flag (EEH_PE_CFG_RESTRICTED) is introduced, which
+ * will be checked in the backend for PE state retrival. If
+ * the PE becomes frozen for the first time and the flag has
+ * been set for the PE, we will set EEH_PE_CFG_BLOCKED for
+ * that PE to block its config space.
+ *
+ * Broadcom Austin 4-ports NICs (14e4:1657)
+ * Broadcom Shiner 2-ports 10G NICs (14e4:168e)
+ */
+ if ((dev->vendor == PCI_VENDOR_ID_BROADCOM && dev->device == 0x1657) ||
+ (dev->vendor == PCI_VENDOR_ID_BROADCOM && dev->device == 0x168e))
+ edev->pe->state |= EEH_PE_CFG_RESTRICTED;
+
/*
* Cache the PE primary bus, which can't be fetched when
* full hotplug is in progress. In that case, all child
return ret;
}
+static inline bool powernv_eeh_cfg_blocked(struct device_node *dn)
+{
+ struct eeh_dev *edev = of_node_to_eeh_dev(dn);
+
+ if (!edev || !edev->pe)
+ return false;
+
+ if (edev->pe->state & EEH_PE_CFG_BLOCKED)
+ return true;
+
+ return false;
+}
+
+static int powernv_eeh_read_config(struct device_node *dn,
+ int where, int size, u32 *val)
+{
+ if (powernv_eeh_cfg_blocked(dn)) {
+ *val = 0xFFFFFFFF;
+ return PCIBIOS_SET_FAILED;
+ }
+
+ return pnv_pci_cfg_read(dn, where, size, val);
+}
+
+static int powernv_eeh_write_config(struct device_node *dn,
+ int where, int size, u32 val)
+{
+ if (powernv_eeh_cfg_blocked(dn))
+ return PCIBIOS_SET_FAILED;
+
+ return pnv_pci_cfg_write(dn, where, size, val);
+}
+
/**
* powernv_eeh_next_error - Retrieve next EEH error to handle
* @pe: Affected PE
.get_log = powernv_eeh_get_log,
.configure_bridge = powernv_eeh_configure_bridge,
.err_inject = powernv_eeh_err_inject,
- .read_config = pnv_pci_cfg_read,
- .write_config = pnv_pci_cfg_write,
+ .read_config = powernv_eeh_read_config,
+ .write_config = powernv_eeh_write_config,
.next_error = powernv_eeh_next_error,
.restore_config = powernv_eeh_restore_config
};
};
/* Print things out */
- if (hmi_evt->version != OpalHMIEvt_V1) {
+ if (hmi_evt->version < OpalHMIEvt_V1) {
pr_err("HMI Interrupt, Unknown event version %d !\n",
hmi_evt->version);
return;
{
struct lpc_debugfs_entry *lpc = filp->private_data;
u32 data, pos, len, todo;
- __be32 bedata;
int rc;
if (!access_ok(VERIFY_WRITE, ubuf, count))
len = 2;
}
rc = opal_lpc_read(opal_lpc_chip_id, lpc->lpc_type, pos,
- &bedata, len);
+ &data, len);
if (rc)
return -ENXIO;
- data = be32_to_cpu(bedata);
+
+ /*
+ * Now there is some trickery with the data returned by OPAL
+ * as it's the desired data right justified in a 32-bit BE
+ * word.
+ *
+ * This is a very bad interface and I'm to blame for it :-(
+ *
+ * So we can't just apply a 32-bit swap to what comes from OPAL,
+ * because user space expects the *bytes* to be in their proper
+ * respective positions (ie, LPC position).
+ *
+ * So what we really want to do here is to shift data right
+ * appropriately on a LE kernel.
+ *
+ * IE. If the LPC transaction has bytes B0, B1, B2 and B3 in that
+ * order, we have in memory written to by OPAL at the "data"
+ * pointer:
+ *
+ * Bytes: OPAL "data" LE "data"
+ * 32-bit: B0 B1 B2 B3 B0B1B2B3 B3B2B1B0
+ * 16-bit: B0 B1 0000B0B1 B1B00000
+ * 8-bit: B0 000000B0 B0000000
+ *
+ * So a BE kernel will have the leftmost of the above in the MSB
+ * and rightmost in the LSB and can just then "cast" the u32 "data"
+ * down to the appropriate quantity and write it.
+ *
+ * However, an LE kernel can't. It doesn't need to swap because a
+ * load from data followed by a store to user are going to preserve
+ * the byte ordering which is the wire byte order which is what the
+ * user wants, but in order to "crop" to the right size, we need to
+ * shift right first.
+ */
switch(len) {
case 4:
rc = __put_user((u32)data, (u32 __user *)ubuf);
break;
case 2:
+#ifdef __LITTLE_ENDIAN__
+ data >>= 16;
+#endif
rc = __put_user((u16)data, (u16 __user *)ubuf);
break;
default:
+#ifdef __LITTLE_ENDIAN__
+ data >>= 24;
+#endif
rc = __put_user((u8)data, (u8 __user *)ubuf);
break;
}
else if (todo > 1 && (pos & 1) == 0)
len = 2;
}
+
+ /*
+ * Similarly to the read case, we have some trickery here but
+ * it's different to handle. We need to pass the value to OPAL in
+ * a register whose layout depends on the access size. We want
+ * to reproduce the memory layout of the user, however we aren't
+ * doing a load from user and a store to another memory location
+ * which would achieve that. Here we pass the value to OPAL via
+ * a register which is expected to contain the "BE" interpretation
+ * of the byte sequence. IE: for a 32-bit access, byte 0 should be
+ * in the MSB. So here we *do* need to byteswap on LE.
+ *
+ * User bytes: LE "data" OPAL "data"
+ * 32-bit: B0 B1 B2 B3 B3B2B1B0 B0B1B2B3
+ * 16-bit: B0 B1 0000B1B0 0000B0B1
+ * 8-bit: B0 000000B0 000000B0
+ */
switch(len) {
case 4:
rc = __get_user(data, (u32 __user *)ubuf);
+ data = cpu_to_be32(data);
break;
case 2:
rc = __get_user(data, (u16 __user *)ubuf);
+ data = cpu_to_be16(data);
break;
default:
rc = __get_user(data, (u8 __user *)ubuf);
#include <linux/delay.h>
#include <linux/mutex.h>
+#include <linux/of_platform.h>
#include <asm/opal.h>
+#include <asm/machdep.h>
static DEFINE_MUTEX(opal_sensor_mutex);
return ret;
}
EXPORT_SYMBOL_GPL(opal_get_sensor_data);
+
+static __init int opal_sensor_init(void)
+{
+ struct platform_device *pdev;
+ struct device_node *sensor;
+
+ sensor = of_find_node_by_path("/ibm,opal/sensors");
+ if (!sensor) {
+ pr_err("Opal node 'sensors' not found\n");
+ return -ENODEV;
+ }
+
+ pdev = of_platform_device_create(sensor, "opal-sensor", NULL);
+ of_node_put(sensor);
+
+ return PTR_ERR_OR_ZERO(pdev);
+}
+machine_subsys_initcall(powernv, opal_sensor_init);
*/
#define OPAL_CALL(name, token) \
- _GLOBAL(name); \
+ _GLOBAL_TOC(name); \
mflr r0; \
std r0,16(r1); \
li r0,token; \
* fwnmi area at 0x7000 to provide the glue space to OPAL
*/
glue = 0x7000;
+
+ /*
+ * Check if we are running on newer firmware that exports
+ * OPAL_HANDLE_HMI token. If yes, then don't ask OPAL to patch
+ * the HMI interrupt and we catch it directly in Linux.
+ *
+ * For older firmware (i.e currently released POWER8 System Firmware
+ * as of today <= SV810_087), we fallback to old behavior and let OPAL
+ * patch the HMI vector and handle it inside OPAL firmware.
+ *
+ * For newer firmware (in development/yet to be released) we will
+ * start catching/handling HMI directly in Linux.
+ */
+ if (!opal_check_token(OPAL_HANDLE_HMI)) {
+ pr_info("opal: Old firmware detected, OPAL handles HMIs.\n");
+ opal_register_exception_handler(
+ OPAL_HYPERVISOR_MAINTENANCE_HANDLER,
+ 0, glue);
+ glue += 128;
+ }
+
opal_register_exception_handler(OPAL_SOFTPATCH_HANDLER, 0, glue);
#endif
unsigned int is_64, struct msi_msg *msg)
{
struct pnv_ioda_pe *pe = pnv_ioda_get_pe(dev);
- struct pci_dn *pdn = pci_get_pdn(dev);
unsigned int xive_num = hwirq - phb->msi_base;
__be32 data;
int rc;
return -ENXIO;
/* Force 32-bit MSI on some broken devices */
- if (pdn && pdn->force_32bit_msi)
+ if (dev->no_64bit_msi)
is_64 = 0;
/* Assign XIVE to PE */
if (is_kdump_kernel()) {
pr_info(" Issue PHB reset ...\n");
ioda_eeh_phb_reset(hose, EEH_RESET_FUNDAMENTAL);
- ioda_eeh_phb_reset(hose, OPAL_DEASSERT_RESET);
+ ioda_eeh_phb_reset(hose, EEH_RESET_DEACTIVATE);
}
/* Configure M64 window */
{
struct pci_controller *hose = pci_bus_to_host(pdev->bus);
struct pnv_phb *phb = hose->private_data;
- struct pci_dn *pdn = pci_get_pdn(pdev);
struct msi_desc *entry;
struct msi_msg msg;
int hwirq;
if (WARN_ON(!phb) || !phb->msi_bmp.bitmap)
return -ENODEV;
- if (pdn && pdn->force_32bit_msi && !phb->msi32_support)
+ if (pdev->no_64bit_msi && !phb->msi32_support)
return -ENODEV;
list_for_each_entry(entry, &pdev->msi_list, list) {
edev = of_node_to_eeh_dev(dn);
if (edev) {
if (edev->pe &&
- (edev->pe->state & EEH_PE_RESET))
+ (edev->pe->state & EEH_PE_CFG_BLOCKED))
return false;
if (edev->mode & EEH_DEV_REMOVED)
#include <asm/rtas.h>
struct cc_workarea {
- u32 drc_index;
- u32 zero;
- u32 name_offset;
- u32 prop_length;
- u32 prop_offset;
+ __be32 drc_index;
+ __be32 zero;
+ __be32 name_offset;
+ __be32 prop_length;
+ __be32 prop_offset;
};
void dlpar_free_cc_property(struct property *prop)
if (!prop)
return NULL;
- name = (char *)ccwa + ccwa->name_offset;
+ name = (char *)ccwa + be32_to_cpu(ccwa->name_offset);
prop->name = kstrdup(name, GFP_KERNEL);
- prop->length = ccwa->prop_length;
- value = (char *)ccwa + ccwa->prop_offset;
+ prop->length = be32_to_cpu(ccwa->prop_length);
+ value = (char *)ccwa + be32_to_cpu(ccwa->prop_offset);
prop->value = kmemdup(value, prop->length, GFP_KERNEL);
if (!prop->value) {
dlpar_free_cc_property(prop);
if (!dn)
return NULL;
- name = (char *)ccwa + ccwa->name_offset;
+ name = (char *)ccwa + be32_to_cpu(ccwa->name_offset);
dn->full_name = kasprintf(GFP_KERNEL, "%s/%s", path, name);
if (!dn->full_name) {
kfree(dn);
#define CALL_AGAIN -2
#define ERR_CFG_USE -9003
-struct device_node *dlpar_configure_connector(u32 drc_index,
+struct device_node *dlpar_configure_connector(__be32 drc_index,
struct device_node *parent)
{
struct device_node *dn;
BUG_ON(get_cpu_current_state(cpu)
!= CPU_STATE_OFFLINE);
cpu_maps_update_done();
- rc = cpu_up(cpu);
+ rc = device_online(get_cpu_device(cpu));
if (rc)
goto out;
cpu_maps_update_begin();
if (!parent)
return -ENODEV;
- dn = dlpar_configure_connector(drc_index, parent);
+ dn = dlpar_configure_connector(cpu_to_be32(drc_index), parent);
if (!dn)
return -EINVAL;
if (get_cpu_current_state(cpu) == CPU_STATE_ONLINE) {
set_preferred_offline_state(cpu, CPU_STATE_OFFLINE);
cpu_maps_update_done();
- rc = cpu_down(cpu);
+ rc = device_offline(get_cpu_device(cpu));
if (rc)
goto out;
cpu_maps_update_begin();
unsigned int cpu;
cpumask_var_t candidate_mask, tmp;
int err = -ENOSPC, len, nthreads, i;
- const u32 *intserv;
+ const __be32 *intserv;
intserv = of_get_property(np, "ibm,ppc-interrupt-server#s", &len);
if (!intserv)
for_each_cpu(cpu, tmp) {
BUG_ON(cpu_present(cpu));
set_cpu_present(cpu, true);
- set_hard_smp_processor_id(cpu, *intserv++);
+ set_hard_smp_processor_id(cpu, be32_to_cpu(*intserv++));
}
err = 0;
out_unlock:
#include <linux/mm.h>
#include <linux/memblock.h>
#include <linux/spinlock.h>
-#include <linux/sched.h> /* for show_stack */
#include <linux/string.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
printk("\tindex = 0x%llx\n", (u64)tbl->it_index);
printk("\ttcenum = 0x%llx\n", (u64)tcenum);
printk("\ttce val = 0x%llx\n", tce );
- show_stack(current, (unsigned long *)__get_SP());
+ dump_stack();
}
tcenum++;
printk("\tindex = 0x%llx\n", (u64)tbl->it_index);
printk("\tnpages = 0x%llx\n", (u64)npages);
printk("\ttce[0] val = 0x%llx\n", tcep[0]);
- show_stack(current, (unsigned long *)__get_SP());
+ dump_stack();
}
return ret;
}
printk("tce_free_pSeriesLP: plpar_tce_put failed. rc=%lld\n", rc);
printk("\tindex = 0x%llx\n", (u64)tbl->it_index);
printk("\ttcenum = 0x%llx\n", (u64)tcenum);
- show_stack(current, (unsigned long *)__get_SP());
+ dump_stack();
}
tcenum++;
printk("\trc = %lld\n", rc);
printk("\tindex = 0x%llx\n", (u64)tbl->it_index);
printk("\tnpages = 0x%llx\n", (u64)npages);
- show_stack(current, (unsigned long *)__get_SP());
+ dump_stack();
}
}
printk("tce_get_pSeriesLP: plpar_tce_get failed. rc=%lld\n", rc);
printk("\tindex = 0x%llx\n", (u64)tbl->it_index);
printk("\ttcenum = 0x%llx\n", (u64)tcenum);
- show_stack(current, (unsigned long *)__get_SP());
+ dump_stack();
}
return tce_ret;
#include <asm/trace.h>
#include <asm/firmware.h>
#include <asm/plpar_wrappers.h>
+#include <asm/fadump.h>
#include "pseries.h"
}
#ifdef __LITTLE_ENDIAN__
- /* Reset exceptions to big endian */
- if (firmware_has_feature(FW_FEATURE_SET_MODE)) {
+ /*
+ * Reset exceptions to big endian.
+ *
+ * FIXME this is a hack for kexec, we need to reset the exception
+ * endian before starting the new kernel and this is a convenient place
+ * to do it.
+ *
+ * This is also called on boot when a fadump happens. In that case we
+ * must not change the exception endian mode.
+ */
+ if (firmware_has_feature(FW_FEATURE_SET_MODE) && !is_fadump_active()) {
long rc;
rc = pseries_big_endian_exceptions();
*/
again:
if (type == PCI_CAP_ID_MSI) {
- if (pdn->force_32bit_msi) {
+ if (pdev->no_64bit_msi) {
rc = rtas_change_msi(pdn, RTAS_CHANGE_32MSI_FN, nvec);
if (rc < 0) {
/*
/* Dynamic logical Partitioning/Mobility */
extern void dlpar_free_cc_nodes(struct device_node *);
extern void dlpar_free_cc_property(struct property *);
-extern struct device_node *dlpar_configure_connector(u32, struct device_node *);
+extern struct device_node *dlpar_configure_connector(__be32,
+ struct device_node *);
extern int dlpar_attach_node(struct device_node *);
extern int dlpar_detach_node(struct device_node *);
cascade_data->virq = virt_msir;
msi->cascade_array[irq_index] = cascade_data;
- ret = request_irq(virt_msir, fsl_msi_cascade, 0,
+ ret = request_irq(virt_msir, fsl_msi_cascade, IRQF_NO_THREAD,
"fsl-msi-cascade", cascade_data);
if (ret) {
dev_err(&dev->dev, "failed to request_irq(%d), ret = %d\n",
#ifdef CONFIG_MSI_BITMAP_SELFTEST
-#define check(x) \
- if (!(x)) printk("msi_bitmap: test failed at line %d\n", __LINE__);
-
static void __init test_basics(void)
{
struct msi_bitmap bmp;
- int i, size = 512;
+ int rc, i, size = 512;
/* Can't allocate a bitmap of 0 irqs */
- check(msi_bitmap_alloc(&bmp, 0, NULL) != 0);
+ WARN_ON(msi_bitmap_alloc(&bmp, 0, NULL) == 0);
/* of_node may be NULL */
- check(0 == msi_bitmap_alloc(&bmp, size, NULL));
+ WARN_ON(msi_bitmap_alloc(&bmp, size, NULL));
/* Should all be free by default */
- check(0 == bitmap_find_free_region(bmp.bitmap, size,
- get_count_order(size)));
+ WARN_ON(bitmap_find_free_region(bmp.bitmap, size, get_count_order(size)));
bitmap_release_region(bmp.bitmap, 0, get_count_order(size));
/* With no node, there's no msi-available-ranges, so expect > 0 */
- check(msi_bitmap_reserve_dt_hwirqs(&bmp) > 0);
+ WARN_ON(msi_bitmap_reserve_dt_hwirqs(&bmp) <= 0);
/* Should all still be free */
- check(0 == bitmap_find_free_region(bmp.bitmap, size,
- get_count_order(size)));
+ WARN_ON(bitmap_find_free_region(bmp.bitmap, size, get_count_order(size)));
bitmap_release_region(bmp.bitmap, 0, get_count_order(size));
/* Check we can fill it up and then no more */
for (i = 0; i < size; i++)
- check(msi_bitmap_alloc_hwirqs(&bmp, 1) >= 0);
+ WARN_ON(msi_bitmap_alloc_hwirqs(&bmp, 1) < 0);
- check(msi_bitmap_alloc_hwirqs(&bmp, 1) < 0);
+ WARN_ON(msi_bitmap_alloc_hwirqs(&bmp, 1) >= 0);
/* Should all be allocated */
- check(bitmap_find_free_region(bmp.bitmap, size, 0) < 0);
+ WARN_ON(bitmap_find_free_region(bmp.bitmap, size, 0) >= 0);
/* And if we free one we can then allocate another */
msi_bitmap_free_hwirqs(&bmp, size / 2, 1);
- check(msi_bitmap_alloc_hwirqs(&bmp, 1) == size / 2);
+ WARN_ON(msi_bitmap_alloc_hwirqs(&bmp, 1) != size / 2);
+
+ /* Free most of them for the alignment tests */
+ msi_bitmap_free_hwirqs(&bmp, 3, size - 3);
/* Check we get a naturally aligned offset */
- check(msi_bitmap_alloc_hwirqs(&bmp, 2) % 2 == 0);
- check(msi_bitmap_alloc_hwirqs(&bmp, 4) % 4 == 0);
- check(msi_bitmap_alloc_hwirqs(&bmp, 8) % 8 == 0);
- check(msi_bitmap_alloc_hwirqs(&bmp, 9) % 16 == 0);
- check(msi_bitmap_alloc_hwirqs(&bmp, 3) % 4 == 0);
- check(msi_bitmap_alloc_hwirqs(&bmp, 7) % 8 == 0);
- check(msi_bitmap_alloc_hwirqs(&bmp, 121) % 128 == 0);
+ rc = msi_bitmap_alloc_hwirqs(&bmp, 2);
+ WARN_ON(rc < 0 && rc % 2 != 0);
+ rc = msi_bitmap_alloc_hwirqs(&bmp, 4);
+ WARN_ON(rc < 0 && rc % 4 != 0);
+ rc = msi_bitmap_alloc_hwirqs(&bmp, 8);
+ WARN_ON(rc < 0 && rc % 8 != 0);
+ rc = msi_bitmap_alloc_hwirqs(&bmp, 9);
+ WARN_ON(rc < 0 && rc % 16 != 0);
+ rc = msi_bitmap_alloc_hwirqs(&bmp, 3);
+ WARN_ON(rc < 0 && rc % 4 != 0);
+ rc = msi_bitmap_alloc_hwirqs(&bmp, 7);
+ WARN_ON(rc < 0 && rc % 8 != 0);
+ rc = msi_bitmap_alloc_hwirqs(&bmp, 121);
+ WARN_ON(rc < 0 && rc % 128 != 0);
msi_bitmap_free(&bmp);
- /* Clients may check bitmap == NULL for "not-allocated" */
- check(bmp.bitmap == NULL);
+ /* Clients may WARN_ON bitmap == NULL for "not-allocated" */
+ WARN_ON(bmp.bitmap != NULL);
kfree(bmp.bitmap);
}
of_node_init(&of_node);
of_node.full_name = node_name;
- check(0 == msi_bitmap_alloc(&bmp, size, &of_node));
+ WARN_ON(msi_bitmap_alloc(&bmp, size, &of_node));
/* No msi-available-ranges, so expect > 0 */
- check(msi_bitmap_reserve_dt_hwirqs(&bmp) > 0);
+ WARN_ON(msi_bitmap_reserve_dt_hwirqs(&bmp) <= 0);
/* Should all still be free */
- check(0 == bitmap_find_free_region(bmp.bitmap, size,
- get_count_order(size)));
+ WARN_ON(bitmap_find_free_region(bmp.bitmap, size, get_count_order(size)));
bitmap_release_region(bmp.bitmap, 0, get_count_order(size));
/* Now create a fake msi-available-ranges property */
of_node.properties = ∝
/* msi-available-ranges, so expect == 0 */
- check(msi_bitmap_reserve_dt_hwirqs(&bmp) == 0);
+ WARN_ON(msi_bitmap_reserve_dt_hwirqs(&bmp));
/* Check we got the expected result */
- check(0 == bitmap_parselist(expected_str, expected, size));
- check(bitmap_equal(expected, bmp.bitmap, size));
+ WARN_ON(bitmap_parselist(expected_str, expected, size));
+ WARN_ON(!bitmap_equal(expected, bmp.bitmap, size));
msi_bitmap_free(&bmp);
kfree(bmp.bitmap);
args.token = rtas_token("set-indicator");
if (args.token == RTAS_UNKNOWN_SERVICE)
return;
- args.nargs = 3;
- args.nret = 1;
+ args.nargs = cpu_to_be32(3);
+ args.nret = cpu_to_be32(1);
args.rets = &args.args[3];
- args.args[0] = SURVEILLANCE_TOKEN;
+ args.args[0] = cpu_to_be32(SURVEILLANCE_TOKEN);
args.args[1] = 0;
args.args[2] = 0;
enter_rtas(__pa(&args));
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_IBM_PARTITION=y
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_TABLES_ARP=m
+CONFIG_NF_NAT_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT_IPV4=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
+CONFIG_NF_NAT_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
-CONFIG_NF_NAT_IPV6=m
-CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NET_SCTPPROBE=m
CONFIG_RDS=m
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_ISCSI_TCP=m
-CONFIG_LIBFCOE=m
CONFIG_SCSI_DEBUG=m
CONFIG_ZFCP=y
CONFIG_SCSI_VIRTIO=m
CONFIG_NLMON=m
CONFIG_VHOST_NET=m
# CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_STATISTICS=y
-CONFIG_XFS_FS=m
+CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_XFS_DEBUG=y
CONFIG_GFS2_FS=m
CONFIG_OCFS2_FS=m
-CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=m
CONFIG_FANOTIFY=y
CONFIG_DETECT_HUNG_TASK=y
CONFIG_TIMER_STATS=y
CONFIG_DEBUG_RT_MUTEXES=y
-CONFIG_RT_MUTEX_TESTER=y
CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y
CONFIG_PROVE_LOCKING=y
CONFIG_LOCK_STAT=y
CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y
CONFIG_LATENCYTOP=y
CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y
+CONFIG_IRQSOFF_TRACER=y
+CONFIG_PREEMPT_TRACER=y
+CONFIG_SCHED_TRACER=y
+CONFIG_FTRACE_SYSCALLS=y
+CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_KPROBE_EVENT is not set
+CONFIG_UPROBE_EVENT=y
CONFIG_LKDTM=m
CONFIG_TEST_LIST_SORT=y
CONFIG_KPROBES_SANITY_TEST=y
CONFIG_INTERVAL_TREE_TEST=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
+CONFIG_TEST_STRING_HELPERS=y
+CONFIG_TEST_KSTRTOX=y
CONFIG_DMA_API_DEBUG=y
+CONFIG_TEST_BPF=m
# CONFIG_STRICT_DEVMEM is not set
CONFIG_S390_PTDUMP=y
CONFIG_ENCRYPTED_KEYS=m
CONFIG_X509_CERTIFICATE_PARSER=m
CONFIG_CRC7=m
CONFIG_CRC8=m
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
CONFIG_CORDIC=m
CONFIG_CMM=m
CONFIG_APPLDATA_BASE=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_IBM_PARTITION=y
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_TABLES_ARP=m
+CONFIG_NF_NAT_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT_IPV4=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
+CONFIG_NF_NAT_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
-CONFIG_NF_NAT_IPV6=m
-CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NET_SCTPPROBE=m
CONFIG_RDS=m
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_ISCSI_TCP=m
-CONFIG_LIBFCOE=m
CONFIG_SCSI_DEBUG=m
CONFIG_ZFCP=y
CONFIG_SCSI_VIRTIO=m
CONFIG_NLMON=m
CONFIG_VHOST_NET=m
# CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_STATISTICS=y
-CONFIG_XFS_FS=m
+CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_GFS2_FS=m
CONFIG_OCFS2_FS=m
-CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=m
CONFIG_FANOTIFY=y
CONFIG_X509_CERTIFICATE_PARSER=m
CONFIG_CRC7=m
CONFIG_CRC8=m
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
CONFIG_CORDIC=m
CONFIG_CMM=m
CONFIG_APPLDATA_BASE=y
CONFIG_MODULE_FORCE_UNLOAD=y
CONFIG_MODVERSIONS=y
CONFIG_MODULE_SRCVERSION_ALL=y
-CONFIG_BLK_DEV_INTEGRITY=y
CONFIG_BLK_DEV_THROTTLING=y
CONFIG_PARTITION_ADVANCED=y
CONFIG_IBM_PARTITION=y
CONFIG_NFT_CHAIN_ROUTE_IPV4=m
CONFIG_NFT_CHAIN_NAT_IPV4=m
CONFIG_NF_TABLES_ARP=m
+CONFIG_NF_NAT_IPV4=m
CONFIG_IP_NF_IPTABLES=m
CONFIG_IP_NF_MATCH_AH=m
CONFIG_IP_NF_MATCH_ECN=m
CONFIG_IP_NF_MATCH_TTL=m
CONFIG_IP_NF_FILTER=m
CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT_IPV4=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
CONFIG_IP_NF_MANGLE=m
CONFIG_IP_NF_TARGET_CLUSTERIP=m
CONFIG_IP_NF_TARGET_ECN=m
CONFIG_NF_TABLES_IPV6=m
CONFIG_NFT_CHAIN_ROUTE_IPV6=m
CONFIG_NFT_CHAIN_NAT_IPV6=m
+CONFIG_NF_NAT_IPV6=m
CONFIG_IP6_NF_IPTABLES=m
CONFIG_IP6_NF_MATCH_AH=m
CONFIG_IP6_NF_MATCH_EUI64=m
CONFIG_IP6_NF_MANGLE=m
CONFIG_IP6_NF_RAW=m
CONFIG_IP6_NF_SECURITY=m
-CONFIG_NF_NAT_IPV6=m
-CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_IP6_NF_TARGET_NPT=m
CONFIG_NF_TABLES_BRIDGE=m
CONFIG_NET_SCTPPROBE=m
CONFIG_RDS=m
CONFIG_CHR_DEV_SG=y
CONFIG_CHR_DEV_SCH=m
CONFIG_SCSI_ENCLOSURE=m
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SPI_ATTRS=m
+CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_SAS_LIBSAS=m
CONFIG_SCSI_SRP_ATTRS=m
CONFIG_ISCSI_TCP=m
-CONFIG_LIBFCOE=m
CONFIG_SCSI_DEBUG=m
CONFIG_ZFCP=y
CONFIG_SCSI_VIRTIO=m
CONFIG_NLMON=m
CONFIG_VHOST_NET=m
# CONFIG_NET_VENDOR_ARC is not set
-# CONFIG_NET_CADENCE is not set
# CONFIG_NET_VENDOR_CHELSIO is not set
# CONFIG_NET_VENDOR_INTEL is not set
# CONFIG_NET_VENDOR_MARVELL is not set
CONFIG_JFS_POSIX_ACL=y
CONFIG_JFS_SECURITY=y
CONFIG_JFS_STATISTICS=y
-CONFIG_XFS_FS=m
+CONFIG_XFS_FS=y
CONFIG_XFS_QUOTA=y
CONFIG_XFS_POSIX_ACL=y
CONFIG_XFS_RT=y
CONFIG_GFS2_FS=m
CONFIG_OCFS2_FS=m
-CONFIG_BTRFS_FS=m
+CONFIG_BTRFS_FS=y
CONFIG_BTRFS_FS_POSIX_ACL=y
CONFIG_NILFS2_FS=m
CONFIG_FANOTIFY=y
CONFIG_RCU_TORTURE_TEST=m
CONFIG_RCU_CPU_STALL_TIMEOUT=60
CONFIG_LATENCYTOP=y
+CONFIG_SCHED_TRACER=y
+CONFIG_FTRACE_SYSCALLS=y
+CONFIG_STACK_TRACER=y
CONFIG_BLK_DEV_IO_TRACE=y
-# CONFIG_KPROBE_EVENT is not set
+CONFIG_UPROBE_EVENT=y
CONFIG_LKDTM=m
CONFIG_PERCPU_TEST=m
CONFIG_ATOMIC64_SELFTEST=y
CONFIG_X509_CERTIFICATE_PARSER=m
CONFIG_CRC7=m
CONFIG_CRC8=m
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
CONFIG_CORDIC=m
CONFIG_CMM=m
CONFIG_APPLDATA_BASE=y
CONFIG_CRASH_DUMP=y
# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
# CONFIG_SECCOMP is not set
-# CONFIG_IUCV is not set
CONFIG_NET=y
+# CONFIG_IUCV is not set
CONFIG_ATM=y
CONFIG_ATM_LANE=y
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_SCSI=y
CONFIG_BLK_DEV_SD=y
CONFIG_SCSI_ENCLOSURE=y
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_FC_ATTRS=y
CONFIG_SCSI_SRP_ATTRS=y
CONFIG_ZFCP=y
# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
CONFIG_RCU_CPU_STALL_TIMEOUT=60
# CONFIG_FTRACE is not set
# CONFIG_STRICT_DEVMEM is not set
-CONFIG_XZ_DEC_X86=y
-CONFIG_XZ_DEC_POWERPC=y
-CONFIG_XZ_DEC_IA64=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_ARMTHUMB=y
-CONFIG_XZ_DEC_SPARC=y
# CONFIG_PFAULT is not set
# CONFIG_S390_HYPFS_FS is not set
# CONFIG_VIRTUALIZATION is not set
CONFIG_BLK_DEV_SR=y
CONFIG_BLK_DEV_SR_VENDOR=y
CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
CONFIG_SCSI_CONSTANTS=y
CONFIG_SCSI_LOGGING=y
CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_FC_ATTRS=y
CONFIG_ZFCP=y
CONFIG_SCSI_VIRTIO=y
CONFIG_NETDEVICES=y
CONFIG_CRYPTO_XCBC=m
CONFIG_CRYPTO_VMAC=m
CONFIG_CRYPTO_CRC32=m
-CONFIG_CRYPTO_CRCT10DIF=m
CONFIG_CRYPTO_MD4=m
CONFIG_CRYPTO_MICHAEL_MIC=m
CONFIG_CRYPTO_RMD128=m
CONFIG_CRYPTO_RMD160=m
CONFIG_CRYPTO_RMD256=m
CONFIG_CRYPTO_RMD320=m
-CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA256=y
CONFIG_CRYPTO_SHA512=m
CONFIG_CRYPTO_TGR192=m
CONFIG_CRYPTO_WP512=m
#include <asm/page.h>
#include <asm/pci_io.h>
-void *xlate_dev_mem_ptr(unsigned long phys);
#define xlate_dev_mem_ptr xlate_dev_mem_ptr
-void unxlate_dev_mem_ptr(unsigned long phys, void *addr);
+void *xlate_dev_mem_ptr(phys_addr_t phys);
+#define unxlate_dev_mem_ptr unxlate_dev_mem_ptr
+void unxlate_dev_mem_ptr(phys_addr_t phys, void *addr);
/*
* Convert a virtual cached pointer to an uncached pointer
#define __raw_writel zpci_write_u32
#define __raw_writeq zpci_write_u64
-#define readb_relaxed readb
-#define readw_relaxed readw
-#define readl_relaxed readl
-#define readq_relaxed readq
-
#endif /* CONFIG_PCI */
#include <asm-generic/io.h>
#define __NR_seccomp 348
#define __NR_getrandom 349
#define __NR_memfd_create 350
-#define NR_syscalls 351
+#define __NR_bpf 351
+#define NR_syscalls 352
/*
* There are some system calls that are not present on 64 bit, some
COMPAT_SYSCALL_WRAP3(seccomp, unsigned int, op, unsigned int, flags, const char __user *, uargs)
COMPAT_SYSCALL_WRAP3(getrandom, char __user *, buf, size_t, count, unsigned int, flags)
COMPAT_SYSCALL_WRAP2(memfd_create, const char __user *, uname, unsigned int, flags)
+COMPAT_SYSCALL_WRAP3(bpf, int, cmd, union bpf_attr *, attr, unsigned int, size);
{
struct ftrace_graph_ent trace;
+ if (unlikely(ftrace_graph_is_dead()))
+ goto out;
if (unlikely(atomic_read(¤t->tracing_graph_pause)))
goto out;
ip = (ip & PSW_ADDR_INSN) - MCOUNT_INSN_SIZE;
*/
local_irq_save(flags);
local_mcck_disable();
- /*
- * Ummm... Does this make sense at all? Copying the percpu struct
- * and then zapping it one statement later?
- */
- memcpy(&mcck, this_cpu_ptr(&cpu_mcck), sizeof(mcck));
- memset(&mcck, 0, sizeof(struct mcck_struct));
+ mcck = *this_cpu_ptr(&cpu_mcck);
+ memset(this_cpu_ptr(&cpu_mcck), 0, sizeof(mcck));
clear_cpu_flag(CIF_MCCK_PENDING);
local_mcck_enable();
local_irq_restore(flags);
perf_pmu_enable(event->pmu);
}
-static int cpumsf_pmu_event_idx(struct perf_event *event)
-{
- return event->hw.idx;
-}
-
CPUMF_EVENT_ATTR(SF, SF_CYCLES_BASIC, PERF_EVENT_CPUM_SF);
CPUMF_EVENT_ATTR(SF, SF_CYCLES_BASIC_DIAG, PERF_EVENT_CPUM_SF_DIAG);
.stop = cpumsf_pmu_stop,
.read = cpumsf_pmu_read,
- .event_idx = cpumsf_pmu_event_idx,
.attr_groups = cpumsf_pmu_attr_groups,
};
SYSCALL(sys_seccomp,sys_seccomp,compat_sys_seccomp)
SYSCALL(sys_getrandom,sys_getrandom,compat_sys_getrandom)
SYSCALL(sys_memfd_create,sys_memfd_create,compat_sys_memfd_create) /* 350 */
+SYSCALL(sys_bpf,sys_bpf,compat_sys_bpf)
* Author(s): Jan Willeke,
*/
-#include <linux/kprobes.h>
#include <linux/uaccess.h>
#include <linux/uprobes.h>
#include <linux/compat.h>
#include <linux/kdebug.h>
#include <asm/switch_to.h>
#include <asm/facility.h>
+#include <asm/kprobes.h>
#include <asm/dis.h>
#include "entry.h"
.type __kernel_clock_gettime,@function
__kernel_clock_gettime:
.cfi_startproc
+ ahi %r15,-16
basr %r5,0
0: al %r5,21f-0b(%r5) /* get &_vdso_data */
chi %r2,__CLOCK_REALTIME_COARSE
1: l %r4,__VDSO_UPD_COUNT+4(%r5) /* load update counter */
tml %r4,0x0001 /* pending update ? loop */
jnz 1b
- stcke 24(%r15) /* Store TOD clock */
- lm %r0,%r1,25(%r15)
+ stcke 0(%r15) /* Store TOD clock */
+ lm %r0,%r1,1(%r15)
s %r0,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
sl %r1,__VDSO_XTIME_STAMP+4(%r5)
brc 3,2f
8: st %r2,0(%r3) /* store tp->tv_sec */
st %r1,4(%r3) /* store tp->tv_nsec */
lhi %r2,0
+ ahi %r15,16
br %r14
/* CLOCK_MONOTONIC_COARSE */
11: l %r4,__VDSO_UPD_COUNT+4(%r5) /* load update counter */
tml %r4,0x0001 /* pending update ? loop */
jnz 11b
- stcke 24(%r15) /* Store TOD clock */
- lm %r0,%r1,25(%r15)
+ stcke 0(%r15) /* Store TOD clock */
+ lm %r0,%r1,1(%r15)
s %r0,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
sl %r1,__VDSO_XTIME_STAMP+4(%r5)
brc 3,12f
17: st %r2,0(%r3) /* store tp->tv_sec */
st %r1,4(%r3) /* store tp->tv_nsec */
lhi %r2,0
+ ahi %r15,16
br %r14
/* Fallback to system call */
19: lhi %r1,__NR_clock_gettime
svc 0
+ ahi %r15,16
br %r14
20: .long 1000000000
.type __kernel_gettimeofday,@function
__kernel_gettimeofday:
.cfi_startproc
+ ahi %r15,-16
basr %r5,0
0: al %r5,13f-0b(%r5) /* get &_vdso_data */
1: ltr %r3,%r3 /* check if tz is NULL */
l %r4,__VDSO_UPD_COUNT+4(%r5) /* load update counter */
tml %r4,0x0001 /* pending update ? loop */
jnz 1b
- stcke 24(%r15) /* Store TOD clock */
- lm %r0,%r1,25(%r15)
+ stcke 0(%r15) /* Store TOD clock */
+ lm %r0,%r1,1(%r15)
s %r0,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
sl %r1,__VDSO_XTIME_STAMP+4(%r5)
brc 3,3f
ahi %r0,-1
3: ms %r0,__VDSO_TK_MULT(%r5) /* * tk->mult */
- st %r0,24(%r15)
+ st %r0,0(%r15)
l %r0,__VDSO_TK_MULT(%r5)
ltr %r1,%r1
mr %r0,%r0
jnm 4f
a %r0,__VDSO_TK_MULT(%r5)
-4: al %r0,24(%r15)
+4: al %r0,0(%r15)
al %r0,__VDSO_XTIME_NSEC(%r5) /* + xtime */
al %r1,__VDSO_XTIME_NSEC+4(%r5)
brc 12,5f
ahi %r0,1
-5: mvc 24(4,%r15),__VDSO_XTIME_SEC+4(%r5)
+5: mvc 0(4,%r15),__VDSO_XTIME_SEC+4(%r5)
cl %r4,__VDSO_UPD_COUNT+4(%r5) /* check update counter */
jne 1b
l %r4,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */
srdl %r0,0(%r4) /* >> tk->shift */
- l %r4,24(%r15) /* get tv_sec from stack */
+ l %r4,0(%r15) /* get tv_sec from stack */
basr %r5,0
6: ltr %r0,%r0
jnz 7f
9: srl %r0,6
st %r0,4(%r2) /* store tv->tv_usec */
10: slr %r2,%r2
+ ahi %r15,16
br %r14
11: .long 1000000000
12: .long 274877907
.type __kernel_clock_gettime,@function
__kernel_clock_gettime:
.cfi_startproc
+ aghi %r15,-16
larl %r5,_vdso_data
cghi %r2,__CLOCK_REALTIME_COARSE
je 4f
0: lg %r4,__VDSO_UPD_COUNT(%r5) /* load update counter */
tmll %r4,0x0001 /* pending update ? loop */
jnz 0b
- stcke 48(%r15) /* Store TOD clock */
+ stcke 0(%r15) /* Store TOD clock */
lgf %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */
lg %r0,__VDSO_WTOM_SEC(%r5)
- lg %r1,49(%r15)
+ lg %r1,1(%r15)
sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */
alg %r1,__VDSO_WTOM_NSEC(%r5)
2: stg %r0,0(%r3) /* store tp->tv_sec */
stg %r1,8(%r3) /* store tp->tv_nsec */
lghi %r2,0
+ aghi %r15,16
br %r14
/* CLOCK_MONOTONIC_COARSE */
5: lg %r4,__VDSO_UPD_COUNT(%r5) /* load update counter */
tmll %r4,0x0001 /* pending update ? loop */
jnz 5b
- stcke 48(%r15) /* Store TOD clock */
+ stcke 0(%r15) /* Store TOD clock */
lgf %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */
- lg %r1,49(%r15)
+ lg %r1,1(%r15)
sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */
alg %r1,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */
7: stg %r0,0(%r3) /* store tp->tv_sec */
stg %r1,8(%r3) /* store tp->tv_nsec */
lghi %r2,0
+ aghi %r15,16
br %r14
/* CLOCK_THREAD_CPUTIME_ID for this thread */
slgr %r4,%r0 /* r4 = tv_nsec */
stg %r4,8(%r3)
lghi %r2,0
+ aghi %r15,16
br %r14
/* Fallback to system call */
12: lghi %r1,__NR_clock_gettime
svc 0
+ aghi %r15,16
br %r14
13: .quad 1000000000
.type __kernel_gettimeofday,@function
__kernel_gettimeofday:
.cfi_startproc
+ aghi %r15,-16
larl %r5,_vdso_data
0: ltgr %r3,%r3 /* check if tz is NULL */
je 1f
lg %r4,__VDSO_UPD_COUNT(%r5) /* load update counter */
tmll %r4,0x0001 /* pending update ? loop */
jnz 0b
- stcke 48(%r15) /* Store TOD clock */
- lg %r1,49(%r15)
+ stcke 0(%r15) /* Store TOD clock */
+ lg %r1,1(%r15)
sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */
msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */
alg %r1,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */
srlg %r0,%r0,6
stg %r0,8(%r2) /* store tv->tv_usec */
4: lghi %r2,0
+ aghi %r15,16
br %r14
5: .quad 1000000000
.long 274877907
clock = S390_lowcore.last_update_clock;
asm volatile(
" stpt %0\n" /* Store current cpu timer value */
+#ifdef CONFIG_HAVE_MARCH_Z9_109_FEATURES
+ " stckf %1" /* Store current tod clock value */
+#else
" stck %1" /* Store current tod clock value */
+#endif
: "=m" (S390_lowcore.last_update_timer),
"=m" (S390_lowcore.last_update_clock));
S390_lowcore.system_timer += timer - S390_lowcore.last_update_timer;
* Copyright IBM Corp. 2014
*/
-#include <linux/kprobes.h>
+#include <asm/kprobes.h>
#include <asm/dis.h>
int probe_is_prohibited_opcode(u16 *insn)
* For swapped prefix pages a new buffer is returned that contains a copy of
* the absolute memory. The buffer size is maximum one page large.
*/
-void *xlate_dev_mem_ptr(unsigned long addr)
+void *xlate_dev_mem_ptr(phys_addr_t addr)
{
void *bounce = (void *) addr;
unsigned long size;
/*
* Free converted buffer for /dev/mem access (if necessary)
*/
-void unxlate_dev_mem_ptr(unsigned long addr, void *buf)
+void unxlate_dev_mem_ptr(phys_addr_t addr, void *buf)
{
if ((void *) addr != buf)
free_page((unsigned long) buf);
}
pgste_set_unlock(ptep, pgste);
out_pte:
- pte_unmap_unlock(*ptep, ptl);
+ pte_unmap_unlock(ptep, ptl);
}
EXPORT_SYMBOL_GPL(__gmap_zap);
}
if (!(pte_val(*ptep) & _PAGE_INVALID) &&
(pte_val(*ptep) & _PAGE_PROTECT)) {
- pte_unmap_unlock(*ptep, ptl);
+ pte_unmap_unlock(ptep, ptl);
if (fixup_user_fault(current, mm, addr, FAULT_FLAG_WRITE)) {
up_read(&mm->mmap_sem);
return -EFAULT;
pgste_val(new) |= PGSTE_UC_BIT;
pgste_set_unlock(ptep, new);
- pte_unmap_unlock(*ptep, ptl);
+ pte_unmap_unlock(ptep, ptl);
up_read(&mm->mmap_sem);
return 0;
}
};
static struct resource scif0_resources[] = {
- DEFINE_RES_MEM(0xfffffe80, 0x100),
+ DEFINE_RES_MEM(0xfffffe80, 0x10),
DEFINE_RES_IRQ(evt2irq(0x4e0)),
};
};
static struct resource scif1_resources[] = {
- DEFINE_RES_MEM(0xa4000150, 0x100),
+ DEFINE_RES_MEM(0xa4000150, 0x10),
DEFINE_RES_IRQ(evt2irq(0x900)),
};
};
static struct resource scif2_resources[] = {
- DEFINE_RES_MEM(0xa4000140, 0x100),
+ DEFINE_RES_MEM(0xa4000140, 0x10),
DEFINE_RES_IRQ(evt2irq(0x880)),
};
int atomic_add_return(int, atomic_t *);
int atomic_cmpxchg(atomic_t *, int, int);
-#define atomic_xchg(v, new) (xchg(&((v)->counter), new))
+int atomic_xchg(atomic_t *, int);
int __atomic_add_unless(atomic_t *, int, int);
void atomic_set(atomic_t *, int);
#ifndef __ARCH_SPARC_CMPXCHG__
#define __ARCH_SPARC_CMPXCHG__
-static inline unsigned long xchg_u32(__volatile__ unsigned long *m, unsigned long val)
-{
- __asm__ __volatile__("swap [%2], %0"
- : "=&r" (val)
- : "0" (val), "r" (m)
- : "memory");
- return val;
-}
-
+unsigned long __xchg_u32(volatile u32 *m, u32 new);
void __xchg_called_with_bad_pointer(void);
static inline unsigned long __xchg(unsigned long x, __volatile__ void * ptr, int size)
{
switch (size) {
case 4:
- return xchg_u32(ptr, x);
+ return __xchg_u32(ptr, x);
}
__xchg_called_with_bad_pointer();
return x;
#define dma_alloc_noncoherent(d, s, h, f) dma_alloc_coherent(d, s, h, f)
#define dma_free_noncoherent(d, s, v, h) dma_free_coherent(d, s, v, h)
+static inline void dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+ enum dma_data_direction dir)
+{
+ /* Since dma_{alloc,free}_noncoherent() allocated coherent memory, this
+ * routine can be a nop.
+ */
+}
+
extern struct dma_map_ops *dma_ops;
extern struct dma_map_ops *leon_dma_ops;
extern struct dma_map_ops pci32_dma_ops;
#include <linux/kernel.h>
#include <linux/ioport.h> /* struct resource */
-#define readb_relaxed(__addr) readb(__addr)
-#define readw_relaxed(__addr) readw(__addr)
-#define readl_relaxed(__addr) readl(__addr)
-
#define IO_SPACE_LIMIT 0xffffffff
#define memset_io(d,c,sz) _memset_io(d,c,sz)
* the cache by using ASI_PHYS_BYPASS_EC_E_L
*/
#define readb readb
+#define readb_relaxed readb
static inline u8 readb(const volatile void __iomem *addr)
{ u8 ret;
}
#define readw readw
+#define readw_relaxed readw
static inline u16 readw(const volatile void __iomem *addr)
{ u16 ret;
}
#define readl readl
+#define readl_relaxed readl
static inline u32 readl(const volatile void __iomem *addr)
{ u32 ret;
}
#define readq readq
+#define readq_relaxed readq
static inline u64 readq(const volatile void __iomem *addr)
{ u64 ret;
}
#define writeb writeb
+#define writeb_relaxed writeb
static inline void writeb(u8 b, volatile void __iomem *addr)
{
__asm__ __volatile__("stba\t%r0, [%1] %2\t/* pci_writeb */"
}
#define writew writew
+#define writew_relaxed writew
static inline void writew(u16 w, volatile void __iomem *addr)
{
__asm__ __volatile__("stha\t%r0, [%1] %2\t/* pci_writew */"
}
#define writel writel
+#define writel_relaxed writel
static inline void writel(u32 l, volatile void __iomem *addr)
{
__asm__ __volatile__("stwa\t%r0, [%1] %2\t/* pci_writel */"
}
#define writeq writeq
+#define writeq_relaxed writeq
static inline void writeq(u64 q, volatile void __iomem *addr)
{
__asm__ __volatile__("stxa\t%r0, [%1] %2\t/* pci_writeq */"
: "memory");
}
-
#define inb inb
static inline u8 inb(unsigned long addr)
{
outsl((unsigned long __force)port, buf, count);
}
-#define readb_relaxed(__addr) readb(__addr)
-#define readw_relaxed(__addr) readw(__addr)
-#define readl_relaxed(__addr) readl(__addr)
-#define readq_relaxed(__addr) readq(__addr)
-
/* Valid I/O Space regions are anywhere, because each PCI bus supported
* can live in an arbitrary area of the physical address range.
*/
/* You must call prom_init() before using any of the library services,
* preferably as early as possible. Pass it the romvec pointer.
*/
-void prom_init(void *cif_handler, void *cif_stack);
+void prom_init(void *cif_handler);
+void prom_init_report(void);
/* Boot argument acquisition, returns the boot command line string. */
char *prom_getbootargs(void);
#endif
#ifdef CONFIG_SPARC64
+void __init start_early_boot(void);
+
/* unaligned_64.c */
int handle_ldf_stq(u32 insn, struct pt_regs *regs);
void handle_ld_nf(u32 insn, struct pt_regs *regs);
{
__u16 ret;
- __asm__ __volatile__ ("lduha [%1] %2, %0"
+ __asm__ __volatile__ ("lduha [%2] %3, %0"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PL));
+ : "m" (*addr), "r" (addr), "i" (ASI_PL));
return ret;
}
#define __arch_swab16p __arch_swab16p
{
__u32 ret;
- __asm__ __volatile__ ("lduwa [%1] %2, %0"
+ __asm__ __volatile__ ("lduwa [%2] %3, %0"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PL));
+ : "m" (*addr), "r" (addr), "i" (ASI_PL));
return ret;
}
#define __arch_swab32p __arch_swab32p
{
__u64 ret;
- __asm__ __volatile__ ("ldxa [%1] %2, %0"
+ __asm__ __volatile__ ("ldxa [%2] %3, %0"
: "=r" (ret)
- : "r" (addr), "i" (ASI_PL));
+ : "m" (*addr), "r" (addr), "i" (ASI_PL));
return ret;
}
#define __arch_swab64p __arch_swab64p
#define __NR_seccomp 346
#define __NR_getrandom 347
#define __NR_memfd_create 348
+#define __NR_bpf 349
-#define NR_syscalls 349
+#define NR_syscalls 350
/* Bitmask values returned from kern_features system call. */
#define KERN_FEATURE_MIXED_MODE_STACK 0x00000001
extern struct pause_patch_entry __pause_3insn_patch,
__pause_3insn_patch_end;
-void __init per_cpu_patch(void);
void sun4v_patch_1insn_range(struct sun4v_1insn_patch_entry *,
struct sun4v_1insn_patch_entry *);
void sun4v_patch_2insn_range(struct sun4v_2insn_patch_entry *,
struct sun4v_2insn_patch_entry *);
-void __init sun4v_patch(void);
-void __init boot_cpu_id_too_large(int cpu);
extern unsigned int dcache_parity_tl1_occurred;
extern unsigned int icache_parity_tl1_occurred;
sethi %hi(init_thread_union), %g6
or %g6, %lo(init_thread_union), %g6
ldx [%g6 + TI_TASK], %g4
- mov %sp, %l6
wr %g0, ASI_P, %asi
mov 1, %g1
sllx %g1, THREAD_SHIFT, %g1
sub %g1, (STACKFRAME_SZ + STACK_BIAS), %g1
add %g6, %g1, %sp
- mov 0, %fp
/* Set per-cpu pointer initially to zero, this makes
* the boot-cpu use the in-kernel-image per-cpu areas
nop
#endif
- mov %l6, %o1 ! OpenPROM stack
call prom_init
mov %l7, %o0 ! OpenPROM cif handler
- /* Initialize current_thread_info()->cpu as early as possible.
- * In order to do that accurately we have to patch up the get_cpuid()
- * assembler sequences. And that, in turn, requires that we know
- * if we are on a Starfire box or not. While we're here, patch up
- * the sun4v sequences as well.
+ /* To create a one-register-window buffer between the kernel's
+ * initial stack and the last stack frame we use from the firmware,
+ * do the rest of the boot from a C helper function.
*/
- call check_if_starfire
- nop
- call per_cpu_patch
- nop
- call sun4v_patch
- nop
-
-#ifdef CONFIG_SMP
- call hard_smp_processor_id
- nop
- cmp %o0, NR_CPUS
- blu,pt %xcc, 1f
- nop
- call boot_cpu_id_too_large
- nop
- /* Not reached... */
-
-1:
-#else
- mov 0, %o0
-#endif
- sth %o0, [%g6 + TI_CPU]
-
- call prom_init_report
- nop
-
- /* Off we go.... */
- call start_kernel
+ call start_early_boot
nop
/* Not reached... */
sllx %g5, THREAD_SHIFT, %g5
sub %g5, (STACKFRAME_SZ + STACK_BIAS), %g5
add %g6, %g5, %sp
- mov 0, %fp
call init_irqwork_curcpu
nop
{
unsigned long csr_reg, csr, csr_error_bits;
irqreturn_t ret = IRQ_NONE;
- u16 stat;
+ u32 stat;
csr_reg = pbm->pbm_regs + SCHIZO_PCI_CTRL;
csr = upa_readq(csr_reg);
pbm->name);
ret = IRQ_HANDLED;
}
- pci_read_config_word(pbm->pci_bus->self, PCI_STATUS, &stat);
+ pbm->pci_ops->read(pbm->pci_bus, 0, PCI_STATUS, 2, &stat);
if (stat & (PCI_STATUS_PARITY |
PCI_STATUS_SIG_TARGET_ABORT |
PCI_STATUS_REC_TARGET_ABORT |
PCI_STATUS_SIG_SYSTEM_ERROR)) {
printk("%s: PCI bus error, PCI_STATUS[%04x]\n",
pbm->name, stat);
- pci_write_config_word(pbm->pci_bus->self, PCI_STATUS, 0xffff);
+ pbm->pci_ops->write(pbm->pci_bus, 0, PCI_STATUS, 2, 0xffff);
ret = IRQ_HANDLED;
}
return ret;
#include <linux/cpu.h>
#include <linux/initrd.h>
#include <linux/module.h>
+#include <linux/start_kernel.h>
#include <asm/io.h>
#include <asm/processor.h>
static struct pt_regs fake_swapper_regs = { { 0, }, 0, 0, 0, 0 };
-void __init per_cpu_patch(void)
+static void __init per_cpu_patch(void)
{
struct cpuid_patch_entry *p;
unsigned long ver;
}
}
-void __init sun4v_patch(void)
+static void __init sun4v_patch(void)
{
extern void sun4v_hvapi_init(void);
}
}
-#ifdef CONFIG_SMP
-void __init boot_cpu_id_too_large(int cpu)
+void __init start_early_boot(void)
{
- prom_printf("Serious problem, boot cpu id (%d) >= NR_CPUS (%d)\n",
- cpu, NR_CPUS);
- prom_halt();
+ int cpu;
+
+ check_if_starfire();
+ per_cpu_patch();
+ sun4v_patch();
+
+ cpu = hard_smp_processor_id();
+ if (cpu >= NR_CPUS) {
+ prom_printf("Serious problem, boot cpu id (%d) >= NR_CPUS (%d)\n",
+ cpu, NR_CPUS);
+ prom_halt();
+ }
+ current_thread_info()->cpu = cpu;
+
+ prom_init_report();
+ start_kernel();
}
-#endif
/* On Ultra, we support all of the v8 capabilities. */
unsigned long sparc64_elf_hwcap = (HWCAP_SPARC_FLUSH | HWCAP_SPARC_STBAR |
void __irq_entry smp_call_function_client(int irq, struct pt_regs *regs)
{
clear_softint(1 << irq);
+ irq_enter();
generic_smp_call_function_interrupt();
+ irq_exit();
}
void __irq_entry smp_call_function_single_client(int irq, struct pt_regs *regs)
{
clear_softint(1 << irq);
+ irq_enter();
generic_smp_call_function_single_interrupt();
+ irq_exit();
}
static void tsb_sync(void *info)
/*330*/ .long sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
/*335*/ .long sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev
/*340*/ .long sys_ni_syscall, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr
-/*345*/ .long sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create
+/*345*/ .long sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf
/*330*/ .word compat_sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, compat_sys_open_by_handle_at, compat_sys_clock_adjtime
.word sys_syncfs, compat_sys_sendmmsg, sys_setns, compat_sys_process_vm_readv, compat_sys_process_vm_writev
/*340*/ .word sys_kern_features, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr
- .word sys32_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create
+ .word sys32_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf
#endif /* CONFIG_COMPAT */
/*330*/ .word sys_fanotify_mark, sys_prlimit64, sys_name_to_handle_at, sys_open_by_handle_at, sys_clock_adjtime
.word sys_syncfs, sys_sendmmsg, sys_setns, sys_process_vm_readv, sys_process_vm_writev
/*340*/ .word sys_kern_features, sys_kcmp, sys_finit_module, sys_sched_setattr, sys_sched_getattr
- .word sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create
+ .word sys_renameat2, sys_seccomp, sys_getrandom, sys_memfd_create, sys_bpf
brnz,pn %g1, 1b
nop
- sethi %hi(p1275buf), %g2
- or %g2, %lo(p1275buf), %g2
- ldx [%g2 + 0x10], %l2
- add %l2, -(192 + 128), %sp
+ /* Get onto temporary stack which will be in the locked
+ * kernel image.
+ */
+ sethi %hi(tramp_stack), %g1
+ or %g1, %lo(tramp_stack), %g1
+ add %g1, TRAMP_STACK_SIZE, %g1
+ sub %g1, STACKFRAME_SZ + STACK_BIAS + 256, %sp
flushw
/* Setup the loop variables:
sllx %g5, THREAD_SHIFT, %g5
sub %g5, (STACKFRAME_SZ + STACK_BIAS), %g5
add %g6, %g5, %sp
- mov 0, %fp
rdpr %pstate, %o1
or %o1, PSTATE_IE, %o1
#undef ATOMIC_OP
+int atomic_xchg(atomic_t *v, int new)
+{
+ int ret;
+ unsigned long flags;
+
+ spin_lock_irqsave(ATOMIC_HASH(v), flags);
+ ret = v->counter;
+ v->counter = new;
+ spin_unlock_irqrestore(ATOMIC_HASH(v), flags);
+ return ret;
+}
+EXPORT_SYMBOL(atomic_xchg);
+
int atomic_cmpxchg(atomic_t *v, int old, int new)
{
int ret;
return (unsigned long)prev;
}
EXPORT_SYMBOL(__cmpxchg_u32);
+
+unsigned long __xchg_u32(volatile u32 *ptr, u32 new)
+{
+ unsigned long flags;
+ u32 prev;
+
+ spin_lock_irqsave(ATOMIC_HASH(ptr), flags);
+ prev = *ptr;
+ *ptr = new;
+ spin_unlock_irqrestore(ATOMIC_HASH(ptr), flags);
+
+ return (unsigned long)prev;
+}
+EXPORT_SYMBOL(__xchg_u32);
return 1;
}
+int __get_user_pages_fast(unsigned long start, int nr_pages, int write,
+ struct page **pages)
+{
+ struct mm_struct *mm = current->mm;
+ unsigned long addr, len, end;
+ unsigned long next, flags;
+ pgd_t *pgdp;
+ int nr = 0;
+
+ start &= PAGE_MASK;
+ addr = start;
+ len = (unsigned long) nr_pages << PAGE_SHIFT;
+ end = start + len;
+
+ local_irq_save(flags);
+ pgdp = pgd_offset(mm, addr);
+ do {
+ pgd_t pgd = *pgdp;
+
+ next = pgd_addr_end(addr, end);
+ if (pgd_none(pgd))
+ break;
+ if (!gup_pud_range(pgd, addr, next, write, pages, &nr))
+ break;
+ } while (pgdp++, addr = next, addr != end);
+ local_irq_restore(flags);
+
+ return nr;
+}
+
int get_user_pages_fast(unsigned long start, int nr_pages, int write,
struct page **pages)
{
.text
.globl prom_cif_direct
prom_cif_direct:
+ save %sp, -192, %sp
sethi %hi(p1275buf), %o1
or %o1, %lo(p1275buf), %o1
- ldx [%o1 + 0x0010], %o2 ! prom_cif_stack
- save %o2, -192, %sp
- ldx [%i1 + 0x0008], %l2 ! prom_cif_handler
+ ldx [%o1 + 0x0008], %l2 ! prom_cif_handler
mov %g4, %l0
mov %g5, %l1
mov %g6, %l3
* It gets passed the pointer to the PROM vector.
*/
-extern void prom_cif_init(void *, void *);
+extern void prom_cif_init(void *);
-void __init prom_init(void *cif_handler, void *cif_stack)
+void __init prom_init(void *cif_handler)
{
phandle node;
- prom_cif_init(cif_handler, cif_stack);
+ prom_cif_init(cif_handler);
prom_chosen_node = prom_finddevice(prom_chosen_path);
if (!prom_chosen_node || (s32)prom_chosen_node == -1)
struct {
long prom_callback; /* 0x00 */
void (*prom_cif_handler)(long *); /* 0x08 */
- unsigned long prom_cif_stack; /* 0x10 */
} p1275buf;
extern void prom_world(int);
void prom_cif_init(void *cif_handler, void *cif_stack)
{
p1275buf.prom_cif_handler = (void (*)(long *))cif_handler;
- p1275buf.prom_cif_stack = (unsigned long)cif_stack;
}
#define readw_relaxed readw
#define readl_relaxed readl
#define readq_relaxed readq
+#define writeb_relaxed writeb
+#define writew_relaxed writew
+#define writel_relaxed writel
+#define writeq_relaxed writeq
#define ioread8 readb
#define ioread16 readw
def_bool y
depends on KPROBES || PERF_EVENTS || UPROBES
+config PERF_EVENTS_INTEL_UNCORE
+ def_bool y
+ depends on PERF_EVENTS && CPU_SUP_INTEL && PCI
+
config OUTPUT_FORMAT
string
default "elf32-i386" if X86_32
suffix-$(CONFIG_KERNEL_LZO) := lzo
suffix-$(CONFIG_KERNEL_LZ4) := lz4
+RUN_SIZE = $(shell $(OBJDUMP) -h vmlinux | \
+ perl $(srctree)/arch/x86/tools/calc_run_size.pl)
quiet_cmd_mkpiggy = MKPIGGY $@
- cmd_mkpiggy = $(obj)/mkpiggy $< > $@ || ( rm -f $@ ; false )
+ cmd_mkpiggy = $(obj)/mkpiggy $< $(RUN_SIZE) > $@ || ( rm -f $@ ; false )
targets += piggy.S
$(obj)/piggy.S: $(obj)/vmlinux.bin.$(suffix-y) $(obj)/mkpiggy FORCE
size = pci->romsize + sizeof(*rom);
status = efi_call_early(allocate_pool, EFI_LOADER_DATA, size, &rom);
- if (status != EFI_SUCCESS)
+ if (status != EFI_SUCCESS) {
+ efi_printk(sys_table, "Failed to alloc mem for rom\n");
return status;
+ }
memset(rom, 0, sizeof(*rom));
status = efi_early->call(pci->pci.read, pci, EfiPciIoWidthUint16,
PCI_VENDOR_ID, 1, &(rom->vendor));
- if (status != EFI_SUCCESS)
+ if (status != EFI_SUCCESS) {
+ efi_printk(sys_table, "Failed to read rom->vendor\n");
goto free_struct;
+ }
status = efi_early->call(pci->pci.read, pci, EfiPciIoWidthUint16,
PCI_DEVICE_ID, 1, &(rom->devid));
- if (status != EFI_SUCCESS)
+ if (status != EFI_SUCCESS) {
+ efi_printk(sys_table, "Failed to read rom->devid\n");
goto free_struct;
+ }
status = efi_early->call(pci->get_location, pci, &(rom->segment),
&(rom->bus), &(rom->device), &(rom->function));
size = pci->romsize + sizeof(*rom);
status = efi_call_early(allocate_pool, EFI_LOADER_DATA, size, &rom);
- if (status != EFI_SUCCESS)
+ if (status != EFI_SUCCESS) {
+ efi_printk(sys_table, "Failed to alloc mem for rom\n");
return status;
+ }
rom->data.type = SETUP_PCI;
rom->data.len = size - sizeof(struct setup_data);
status = efi_early->call(pci->pci.read, pci, EfiPciIoWidthUint16,
PCI_VENDOR_ID, 1, &(rom->vendor));
- if (status != EFI_SUCCESS)
+ if (status != EFI_SUCCESS) {
+ efi_printk(sys_table, "Failed to read rom->vendor\n");
goto free_struct;
+ }
status = efi_early->call(pci->pci.read, pci, EfiPciIoWidthUint16,
PCI_DEVICE_ID, 1, &(rom->devid));
- if (status != EFI_SUCCESS)
+ if (status != EFI_SUCCESS) {
+ efi_printk(sys_table, "Failed to read rom->devid\n");
goto free_struct;
+ }
status = efi_early->call(pci->get_location, pci, &(rom->segment),
&(rom->bus), &(rom->device), &(rom->function));
EFI_LOADER_DATA,
size, (void **)&pci_handle);
- if (status != EFI_SUCCESS)
+ if (status != EFI_SUCCESS) {
+ efi_printk(sys_table, "Failed to alloc mem for pci_handle\n");
return;
+ }
status = efi_call_early(locate_handle,
EFI_LOCATE_BY_PROTOCOL, &pci_proto,
memset(sdt, 0, sizeof(*sdt));
+ status = efi_parse_options(cmdline_ptr);
+ if (status != EFI_SUCCESS)
+ goto fail2;
+
status = handle_cmdline_files(sys_table, image,
(char *)(unsigned long)hdr->cmd_line_ptr,
"initrd=", hdr->initrd_addr_max,
* Do the decompression, and jump to the new kernel..
*/
/* push arguments for decompress_kernel: */
- pushl $z_output_len /* decompressed length */
+ pushl $z_run_size /* size of kernel with .bss and .brk */
+ pushl $z_output_len /* decompressed length, end of relocs */
leal z_extract_offset_negative(%ebx), %ebp
pushl %ebp /* output address */
pushl $z_input_len /* input_len */
pushl %eax /* heap area */
pushl %esi /* real mode pointer */
call decompress_kernel /* returns kernel location in %eax */
- addl $24, %esp
+ addl $28, %esp
/*
* Jump to the decompressed kernel.
* Do the decompression, and jump to the new kernel..
*/
pushq %rsi /* Save the real mode argument */
+ movq $z_run_size, %r9 /* size of kernel with .bss and .brk */
+ pushq %r9
movq %rsi, %rdi /* real mode address */
leaq boot_heap(%rip), %rsi /* malloc area for uncompression */
leaq input_data(%rip), %rdx /* input_data */
movl $z_input_len, %ecx /* input_len */
movq %rbp, %r8 /* output target address */
- movq $z_output_len, %r9 /* decompressed length */
+ movq $z_output_len, %r9 /* decompressed length, end of relocs */
call decompress_kernel /* returns kernel location in %rax */
+ popq %r9
popq %rsi
/*
unsigned char *input_data,
unsigned long input_len,
unsigned char *output,
- unsigned long output_len)
+ unsigned long output_len,
+ unsigned long run_size)
{
real_mode = rmode;
free_mem_ptr = heap; /* Heap */
free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
- output = choose_kernel_location(input_data, input_len,
- output, output_len);
+ /*
+ * The memory hole needed for the kernel is the larger of either
+ * the entire decompressed kernel plus relocation table, or the
+ * entire decompressed kernel plus .bss and .brk sections.
+ */
+ output = choose_kernel_location(input_data, input_len, output,
+ output_len > run_size ? output_len
+ : run_size);
/* Validate memory location choices. */
if ((unsigned long)output & (MIN_KERNEL_ALIGN - 1))
uint32_t olen;
long ilen;
unsigned long offs;
+ unsigned long run_size;
FILE *f = NULL;
int retval = 1;
- if (argc < 2) {
- fprintf(stderr, "Usage: %s compressed_file\n", argv[0]);
+ if (argc < 3) {
+ fprintf(stderr, "Usage: %s compressed_file run_size\n",
+ argv[0]);
goto bail;
}
offs += olen >> 12; /* Add 8 bytes for each 32K block */
offs += 64*1024 + 128; /* Add 64K + 128 bytes slack */
offs = (offs+4095) & ~4095; /* Round to a 4K boundary */
+ run_size = atoi(argv[2]);
printf(".section \".rodata..compressed\",\"a\",@progbits\n");
printf(".globl z_input_len\n");
/* z_extract_offset_negative allows simplification of head_32.S */
printf(".globl z_extract_offset_negative\n");
printf("z_extract_offset_negative = -0x%lx\n", offs);
+ printf(".globl z_run_size\n");
+ printf("z_run_size = %lu\n", run_size);
printf(".globl input_data, input_data_end\n");
printf("input_data:\n");
* ourselves. To save a few cycles, we can check whether
* NT was set instead of doing an unconditional popfq.
*/
- testl $X86_EFLAGS_NT,EFLAGS(%rsp) /* saved EFLAGS match cpu */
+ testl $X86_EFLAGS_NT,EFLAGS-ARGOFFSET(%rsp)
jnz sysenter_fix_flags
sysenter_flags_fixed:
*/
#define __efi_call_virt(f, args...) efi_call_virt(f, args)
-extern void __iomem *efi_ioremap(unsigned long addr, unsigned long size,
- u32 type, u64 attribute);
+extern void __iomem *__init efi_ioremap(unsigned long addr, unsigned long size,
+ u32 type, u64 attribute);
#endif /* CONFIG_X86_32 */
-extern int add_efi_memmap;
extern struct efi_scratch efi_scratch;
-extern void efi_set_executable(efi_memory_desc_t *md, bool executable);
-extern int efi_memblock_x86_reserve_range(void);
-extern void efi_call_phys_prelog(void);
-extern void efi_call_phys_epilog(void);
-extern void efi_unmap_memmap(void);
-extern void efi_memory_uc(u64 addr, unsigned long size);
+extern void __init efi_set_executable(efi_memory_desc_t *md, bool executable);
+extern int __init efi_memblock_x86_reserve_range(void);
+extern void __init efi_call_phys_prolog(void);
+extern void __init efi_call_phys_epilog(void);
+extern void __init efi_unmap_memmap(void);
+extern void __init efi_memory_uc(u64 addr, unsigned long size);
extern void __init efi_map_region(efi_memory_desc_t *md);
extern void __init efi_map_region_fixed(efi_memory_desc_t *md);
extern void efi_sync_low_kernel_mappings(void);
-extern int efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages);
-extern void efi_cleanup_page_tables(unsigned long pa_memmap, unsigned num_pages);
+extern int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages);
+extern void __init efi_cleanup_page_tables(unsigned long pa_memmap, unsigned num_pages);
extern void __init old_map_region(efi_memory_desc_t *md);
extern void __init runtime_code_page_mkexec(void);
extern void __init efi_runtime_mkexec(void);
extern bool efi_reboot_required(void);
#else
-/*
- * IF EFI is not configured, have the EFI calls return -ENOSYS.
- */
-#define efi_call0(_f) (-ENOSYS)
-#define efi_call1(_f, _a1) (-ENOSYS)
-#define efi_call2(_f, _a1, _a2) (-ENOSYS)
-#define efi_call3(_f, _a1, _a2, _a3) (-ENOSYS)
-#define efi_call4(_f, _a1, _a2, _a3, _a4) (-ENOSYS)
-#define efi_call5(_f, _a1, _a2, _a3, _a4, _a5) (-ENOSYS)
-#define efi_call6(_f, _a1, _a2, _a3, _a4, _a5, _a6) (-ENOSYS)
static inline void parse_efi_setup(u64 phys_addr, u32 data_len) {}
static inline bool efi_reboot_required(void)
{
#define __raw_readw __readw
#define __raw_readl __readl
+#define writeb_relaxed(v, a) __writeb(v, a)
+#define writew_relaxed(v, a) __writew(v, a)
+#define writel_relaxed(v, a) __writel(v, a)
#define __raw_writeb __writeb
#define __raw_writew __writew
#define __raw_writel __writel
build_mmio_write(writeq, "q", unsigned long, "r", :"memory")
#define readq_relaxed(a) readq(a)
+#define writeq_relaxed(v, a) writeq(v, a)
#define __raw_readq(a) readq(a)
#define __raw_writeq(val, addr) writeq(val, addr)
BUILDIO(w, w, short)
BUILDIO(l, , int)
-extern void *xlate_dev_mem_ptr(unsigned long phys);
-extern void unxlate_dev_mem_ptr(unsigned long phys, void *addr);
+extern void *xlate_dev_mem_ptr(phys_addr_t phys);
+extern void unxlate_dev_mem_ptr(phys_addr_t phys, void *addr);
extern int ioremap_change_attr(unsigned long vaddr, unsigned long size,
unsigned long prot_val);
kvm_queue_exception_e(vcpu, GP_VECTOR, error_code);
}
+static inline u64 get_canonical(u64 la)
+{
+ return ((int64_t)la << 16) >> 16;
+}
+
+static inline bool is_noncanonical_address(u64 la)
+{
+#ifdef CONFIG_X86_64
+ return get_canonical(la) != la;
+#else
+ return false;
+#endif
+}
+
#define TSS_IOPB_BASE_OFFSET 0x66
#define TSS_BASE_SIZE 0x68
#define TSS_IOPB_SIZE (65536 / 8)
unsigned long address);
void kvm_define_shared_msr(unsigned index, u32 msr);
-void kvm_set_shared_msr(unsigned index, u64 val, u64 mask);
+int kvm_set_shared_msr(unsigned index, u64 val, u64 mask);
bool kvm_is_linear_rip(struct kvm_vcpu *vcpu, unsigned long linear_rip);
#define THREAD_SIZE_ORDER 1
#define THREAD_SIZE (PAGE_SIZE << THREAD_SIZE_ORDER)
-#define STACKFAULT_STACK 0
#define DOUBLEFAULT_STACK 1
#define NMI_STACK 0
#define DEBUG_STACK 0
#define IRQ_STACK_ORDER 2
#define IRQ_STACK_SIZE (PAGE_SIZE << IRQ_STACK_ORDER)
-#define STACKFAULT_STACK 1
-#define DOUBLEFAULT_STACK 2
-#define NMI_STACK 3
-#define DEBUG_STACK 4
-#define MCE_STACK 5
-#define N_EXCEPTION_STACKS 5 /* hw limit: 7 */
+#define DOUBLEFAULT_STACK 1
+#define NMI_STACK 2
+#define DEBUG_STACK 3
+#define MCE_STACK 4
+#define N_EXCEPTION_STACKS 4 /* hw limit: 7 */
#define PUD_PAGE_SIZE (_AC(1, UL) << PUD_SHIFT)
#define PUD_PAGE_MASK (~(PUD_PAGE_SIZE-1))
#define IBS_CAPS_BRNTRGT (1U<<5)
#define IBS_CAPS_OPCNTEXT (1U<<6)
#define IBS_CAPS_RIPINVALIDCHK (1U<<7)
+#define IBS_CAPS_OPBRNFUSE (1U<<8)
+#define IBS_CAPS_FETCHCTLEXTD (1U<<9)
+#define IBS_CAPS_OPDATA4 (1U<<10)
#define IBS_CAPS_DEFAULT (IBS_CAPS_AVAIL \
| IBS_CAPS_FETCHSAM \
/*
* must be macros to avoid header recursion hell
*/
-#define task_preempt_count(p) \
- (task_thread_info(p)->saved_preempt_count & ~PREEMPT_NEED_RESCHED)
-
#define init_task_preempt_count(p) do { \
task_thread_info(p)->saved_preempt_count = PREEMPT_DISABLED; \
} while (0)
# ifdef CONFIG_CONTEXT_TRACKING
extern asmlinkage void ___preempt_schedule_context(void);
# define __preempt_schedule_context() asm ("call ___preempt_schedule_context")
+ extern asmlinkage void preempt_schedule_context(void);
# endif
#endif
}
void cpu_disable_common(void);
+void cpu_die_common(unsigned int cpu);
void native_smp_prepare_boot_cpu(void);
void native_smp_prepare_cpus(unsigned int max_cpus);
void native_smp_cpus_done(unsigned int max_cpus);
static inline void arch_spin_unlock_wait(arch_spinlock_t *lock)
{
- while (arch_spin_is_locked(lock))
+ __ticket_t head = ACCESS_ONCE(lock->tickets.head);
+
+ for (;;) {
+ struct __raw_tickets tmp = ACCESS_ONCE(lock->tickets);
+ /*
+ * We need to check "unlocked" in a loop, tmp.head == head
+ * can be false positive because of overflow.
+ */
+ if (tmp.head == (tmp.tail & ~TICKET_SLOWPATH_FLAG) ||
+ tmp.head != head)
+ break;
+
cpu_relax();
+ }
}
/*
/* Only used for 64 bit */
#define _TIF_DO_NOTIFY_MASK \
(_TIF_SIGPENDING | _TIF_MCE_NOTIFY | _TIF_NOTIFY_RESUME | \
- _TIF_USER_RETURN_NOTIFY)
+ _TIF_USER_RETURN_NOTIFY | _TIF_UPROBE)
/* flags to check in __switch_to() */
#define _TIF_WORK_CTXSW \
#ifdef CONFIG_TRACING
asmlinkage void trace_page_fault(void);
+#define trace_stack_segment stack_segment
#define trace_divide_error divide_error
#define trace_bounds bounds
#define trace_invalid_op invalid_op
#define MSR_AMD64_IBSOP_REG_MASK ((1UL<<MSR_AMD64_IBSOP_REG_COUNT)-1)
#define MSR_AMD64_IBSCTL 0xc001103a
#define MSR_AMD64_IBSBRTARGET 0xc001103b
+#define MSR_AMD64_IBSOPDATA4 0xc001103d
#define MSR_AMD64_IBS_REG_COUNT_MAX 8 /* includes MSR_AMD64_IBSBRTARGET */
/* Fam 16h MSRs */
#define EXIT_REASON_EPT_MISCONFIG 49
#define EXIT_REASON_INVEPT 50
#define EXIT_REASON_PREEMPTION_TIMER 52
+#define EXIT_REASON_INVVPID 53
#define EXIT_REASON_WBINVD 54
#define EXIT_REASON_XSETBV 55
#define EXIT_REASON_APIC_WRITE 56
{ EXIT_REASON_EOI_INDUCED, "EOI_INDUCED" }, \
{ EXIT_REASON_INVALID_STATE, "INVALID_STATE" }, \
{ EXIT_REASON_INVD, "INVD" }, \
+ { EXIT_REASON_INVVPID, "INVVPID" }, \
{ EXIT_REASON_INVPCID, "INVPCID" }
#endif /* _UAPIVMX_H */
/* Don't set up the ACPI SCI because it's already set up */
if (acpi_gbl_FADT.sci_interrupt == gsi)
- return gsi;
+ return mp_map_gsi_to_irq(gsi, IOAPIC_MAP_ALLOC);
trigger = trigger == ACPI_EDGE_SENSITIVE ? 0 : 1;
polarity = polarity == ACPI_ACTIVE_HIGH ? 0 : 1;
int acpi_gsi_to_irq(u32 gsi, unsigned int *irqp)
{
- int irq = mp_map_gsi_to_irq(gsi, IOAPIC_MAP_ALLOC | IOAPIC_MAP_CHECK);
+ int irq;
- if (irq >= 0) {
+ if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
+ *irqp = gsi;
+ } else {
+ irq = mp_map_gsi_to_irq(gsi,
+ IOAPIC_MAP_ALLOC | IOAPIC_MAP_CHECK);
+ if (irq < 0)
+ return -1;
*irqp = irq;
- return 0;
}
-
- return -1;
+ return 0;
}
EXPORT_SYMBOL_GPL(acpi_gsi_to_irq);
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F3) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_M10H_F3) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F3) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_M60H_NB_F3) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F3) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F3) },
{}
static const struct pci_device_id amd_nb_link_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F4) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_15H_M60H_NB_F4) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_NB_F4) },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F4) },
{}
irq_modify_status(adev->irq, 0, IRQ_MOVE_PCNTXT);
irq_set_affinity(adev->irq, cpumask_of(adev->cpu));
- /* APB timer irqs are set up as mp_irqs, timer is edge type */
- __irq_set_handler(adev->irq, handle_edge_irq, 0, "edge");
}
/* Should be called with per cpu */
unsigned int value, queued;
int i, j, acked = 0;
unsigned long long tsc = 0, ntsc;
- long long max_loops = cpu_khz;
+ long long max_loops = cpu_khz ? cpu_khz : 1000000;
if (cpu_has_tsc)
rdtscll(tsc);
break;
}
if (queued) {
- if (cpu_has_tsc) {
+ if (cpu_has_tsc && cpu_khz) {
rdtscll(ntsc);
max_loops = (cpu_khz << 10) - (ntsc - tsc);
} else
endif
obj-$(CONFIG_CPU_SUP_INTEL) += perf_event_p6.o perf_event_knc.o perf_event_p4.o
obj-$(CONFIG_CPU_SUP_INTEL) += perf_event_intel_lbr.o perf_event_intel_ds.o perf_event_intel.o
-obj-$(CONFIG_CPU_SUP_INTEL) += perf_event_intel_uncore.o perf_event_intel_uncore_snb.o
-obj-$(CONFIG_CPU_SUP_INTEL) += perf_event_intel_uncore_snbep.o perf_event_intel_uncore_nhmex.o
obj-$(CONFIG_CPU_SUP_INTEL) += perf_event_intel_rapl.o
+
+obj-$(CONFIG_PERF_EVENTS_INTEL_UNCORE) += perf_event_intel_uncore.o \
+ perf_event_intel_uncore_snb.o \
+ perf_event_intel_uncore_snbep.o \
+ perf_event_intel_uncore_nhmex.o
endif
static int __init x86_xsave_setup(char *s)
{
+ if (strlen(s))
+ return 0;
setup_clear_cpu_cap(X86_FEATURE_XSAVE);
setup_clear_cpu_cap(X86_FEATURE_XSAVEOPT);
setup_clear_cpu_cap(X86_FEATURE_XSAVES);
{
#ifdef CONFIG_X86_F00F_BUG
/*
- * All current models of Pentium and Pentium with MMX technology CPUs
+ * All models of Pentium and Pentium with MMX technology CPUs
* have the F0 0F bug, which lets nonprivileged users lock up the
* system. Announce that the fault handler will be checking for it.
+ * The Quark is also family 5, but does not have the same bug.
*/
clear_cpu_bug(c, X86_BUG_F00F);
- if (!paravirt_enabled() && c->x86 == 5) {
+ if (!paravirt_enabled() && c->x86 == 5 && c->x86_model < 9) {
static int f00f_workaround_enabled;
set_cpu_bug(c, X86_BUG_F00F);
* load_microcode_amd() to save equivalent cpu table and microcode patches in
* kernel heap memory.
*/
-static void apply_ucode_in_initrd(void *ucode, size_t size)
+static void apply_ucode_in_initrd(void *ucode, size_t size, bool save_patch)
{
struct equiv_cpu_entry *eq;
size_t *cont_sz;
u32 *header;
u8 *data, **cont;
+ u8 (*patch)[PATCH_MAX_SIZE];
u16 eq_id = 0;
int offset, left;
u32 rev, eax, ebx, ecx, edx;
new_rev = (u32 *)__pa_nodebug(&ucode_new_rev);
cont_sz = (size_t *)__pa_nodebug(&container_size);
cont = (u8 **)__pa_nodebug(&container);
+ patch = (u8 (*)[PATCH_MAX_SIZE])__pa_nodebug(&amd_ucode_patch);
#else
new_rev = &ucode_new_rev;
cont_sz = &container_size;
cont = &container;
+ patch = &amd_ucode_patch;
#endif
data = ucode;
rev = mc->hdr.patch_id;
*new_rev = rev;
- /* save ucode patch */
- memcpy(amd_ucode_patch, mc,
- min_t(u32, header[1], PATCH_MAX_SIZE));
+ if (save_patch)
+ memcpy(patch, mc,
+ min_t(u32, header[1], PATCH_MAX_SIZE));
}
}
*data = cp.data;
*size = cp.size;
- apply_ucode_in_initrd(cp.data, cp.size);
+ apply_ucode_in_initrd(cp.data, cp.size, true);
}
#ifdef CONFIG_X86_32
size_t *usize;
void **ucode;
- mc = (struct microcode_amd *)__pa(amd_ucode_patch);
+ mc = (struct microcode_amd *)__pa_nodebug(amd_ucode_patch);
if (mc->hdr.patch_id && mc->hdr.processor_rev_id) {
__apply_microcode_amd(mc);
return;
if (!*ucode || !*usize)
return;
- apply_ucode_in_initrd(*ucode, *usize);
+ apply_ucode_in_initrd(*ucode, *usize, false);
}
static void __init collect_cpu_sig_on_bsp(void *arg)
* AP has a different equivalence ID than BSP, looks like
* mixed-steppings silicon so go through the ucode blob anew.
*/
- apply_ucode_in_initrd(ucode_cpio.data, ucode_cpio.size);
+ apply_ucode_in_initrd(ucode_cpio.data, ucode_cpio.size, false);
}
}
#endif
int __init save_microcode_in_initrd_amd(void)
{
unsigned long cont;
+ int retval = 0;
enum ucode_state ret;
+ u8 *cont_va;
u32 eax;
if (!container)
#ifdef CONFIG_X86_32
get_bsp_sig();
- cont = (unsigned long)container;
+ cont = (unsigned long)container;
+ cont_va = __va(container);
#else
/*
* We need the physical address of the container for both bitness since
* boot_params.hdr.ramdisk_image is a physical address.
*/
- cont = __pa(container);
+ cont = __pa(container);
+ cont_va = container;
#endif
/*
if (relocated_ramdisk)
container = (u8 *)(__va(relocated_ramdisk) +
(cont - boot_params.hdr.ramdisk_image));
+ else
+ container = cont_va;
if (ucode_new_rev)
pr_info("microcode: updated early to new patch_level=0x%08x\n",
ret = load_microcode_amd(eax, container, container_size);
if (ret != UCODE_OK)
- return -EINVAL;
+ retval = -EINVAL;
/*
* This will be freed any msec now, stash patches for the current
container = NULL;
container_size = 0;
- return 0;
+ return retval;
}
if (uci->valid && uci->mc)
microcode_ops->apply_microcode(cpu);
+#ifdef CONFIG_X86_64
+ else if (!uci->mc)
+ /*
+ * We might resume and not have applied late microcode but still
+ * have a newer patch stashed from the early loader. We don't
+ * have it in uci->mc so we have to load it the same way we're
+ * applying patches early on the APs.
+ */
+ load_ucode_ap();
+#endif
}
static struct syscore_ops mc_syscore_ops = {
static bool check_loader_disabled_ap(void)
{
#ifdef CONFIG_X86_32
- return __pa_nodebug(dis_ucode_ldr);
+ return *((bool *)__pa_nodebug(&dis_ucode_ldr));
#else
return dis_ucode_ldr;
#endif
msr_fail:
printk(KERN_CONT "Broken PMU hardware detected, using software events only.\n");
- printk(boot_cpu_has(X86_FEATURE_HYPERVISOR) ? KERN_INFO : KERN_ERR
- "Failed to access perfctr msr (MSR %x is %Lx)\n", reg, val_new);
+ printk("%sFailed to access perfctr msr (MSR %x is %Lx)\n",
+ boot_cpu_has(X86_FEATURE_HYPERVISOR) ? KERN_INFO : KERN_ERR,
+ reg, val_new);
return false;
}
if (event->attr.type == PERF_TYPE_RAW)
event->hw.config |= event->attr.config & X86_RAW_EVENT_MASK;
- if (event->attr.sample_period && x86_pmu.limit_period) {
- if (x86_pmu.limit_period(event, event->attr.sample_period) >
- event->attr.sample_period)
- return -EINVAL;
- }
-
return x86_setup_perfctr(event);
}
if (left > x86_pmu.max_period)
left = x86_pmu.max_period;
- if (x86_pmu.limit_period)
- left = x86_pmu.limit_period(event, left);
-
per_cpu(pmc_prev_left[idx], smp_processor_id()) = left;
/*
#define INTEL_UEVENT_CONSTRAINT(c, n) \
EVENT_CONSTRAINT(c, n, INTEL_ARCH_EVENT_MASK)
+/* Like UEVENT_CONSTRAINT, but match flags too */
+#define INTEL_FLAGS_UEVENT_CONSTRAINT(c, n) \
+ EVENT_CONSTRAINT(c, n, INTEL_ARCH_EVENT_MASK|X86_ALL_EVENT_FLAGS)
+
#define INTEL_PLD_CONSTRAINT(c, n) \
__EVENT_CONSTRAINT(c, n, INTEL_ARCH_EVENT_MASK|X86_ALL_EVENT_FLAGS, \
HWEIGHT(n), 0, PERF_X86_EVENT_PEBS_LDLAT)
struct x86_pmu_quirk *quirks;
int perfctr_second_write;
bool late_ack;
- unsigned (*limit_period)(struct perf_event *event, unsigned l);
/*
* sysfs attrs
perf_ibs->offset_max,
offset + 1);
} while (offset < offset_max);
+ if (event->attr.sample_type & PERF_SAMPLE_RAW) {
+ /*
+ * Read IbsBrTarget and IbsOpData4 separately
+ * depending on their availability.
+ * Can't add to offset_max as they are staggered
+ */
+ if (ibs_caps & IBS_CAPS_BRNTRGT) {
+ rdmsrl(MSR_AMD64_IBSBRTARGET, *buf++);
+ size++;
+ }
+ if (ibs_caps & IBS_CAPS_OPDATA4) {
+ rdmsrl(MSR_AMD64_IBSOPDATA4, *buf++);
+ size++;
+ }
+ }
ibs_data.size = sizeof(u64) * size;
regs = *iregs;
EVENT_CONSTRAINT_END
};
-static struct event_constraint intel_bdw_event_constraints[] = {
- FIXED_EVENT_CONSTRAINT(0x00c0, 0), /* INST_RETIRED.ANY */
- FIXED_EVENT_CONSTRAINT(0x003c, 1), /* CPU_CLK_UNHALTED.CORE */
- FIXED_EVENT_CONSTRAINT(0x0300, 2), /* CPU_CLK_UNHALTED.REF */
- INTEL_UEVENT_CONSTRAINT(0x148, 0x4), /* L1D_PEND_MISS.PENDING */
- INTEL_EVENT_CONSTRAINT(0xa3, 0x4), /* CYCLE_ACTIVITY.* */
- EVENT_CONSTRAINT_END
-};
-
static u64 intel_pmu_event_map(int hw_event)
{
return intel_perfmon_event_map[hw_event];
};
-static __initconst const u64 hsw_hw_cache_event_ids
- [PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX] =
-{
- [ C(L1D ) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0x81d0, /* MEM_UOPS_RETIRED.ALL_LOADS */
- [ C(RESULT_MISS) ] = 0x151, /* L1D.REPLACEMENT */
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0x82d0, /* MEM_UOPS_RETIRED.ALL_STORES */
- [ C(RESULT_MISS) ] = 0x0,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0x0,
- [ C(RESULT_MISS) ] = 0x0,
- },
- },
- [ C(L1I ) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0x0,
- [ C(RESULT_MISS) ] = 0x280, /* ICACHE.MISSES */
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0x0,
- [ C(RESULT_MISS) ] = 0x0,
- },
- },
- [ C(LL ) ] = {
- [ C(OP_READ) ] = {
- /* OFFCORE_RESPONSE:ALL_DATA_RD|ALL_CODE_RD */
- [ C(RESULT_ACCESS) ] = 0x1b7,
- /* OFFCORE_RESPONSE:ALL_DATA_RD|ALL_CODE_RD|SUPPLIER_NONE|
- L3_MISS|ANY_SNOOP */
- [ C(RESULT_MISS) ] = 0x1b7,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0x1b7, /* OFFCORE_RESPONSE:ALL_RFO */
- /* OFFCORE_RESPONSE:ALL_RFO|SUPPLIER_NONE|L3_MISS|ANY_SNOOP */
- [ C(RESULT_MISS) ] = 0x1b7,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0x0,
- [ C(RESULT_MISS) ] = 0x0,
- },
- },
- [ C(DTLB) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0x81d0, /* MEM_UOPS_RETIRED.ALL_LOADS */
- [ C(RESULT_MISS) ] = 0x108, /* DTLB_LOAD_MISSES.MISS_CAUSES_A_WALK */
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0x82d0, /* MEM_UOPS_RETIRED.ALL_STORES */
- [ C(RESULT_MISS) ] = 0x149, /* DTLB_STORE_MISSES.MISS_CAUSES_A_WALK */
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0x0,
- [ C(RESULT_MISS) ] = 0x0,
- },
- },
- [ C(ITLB) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0x6085, /* ITLB_MISSES.STLB_HIT */
- [ C(RESULT_MISS) ] = 0x185, /* ITLB_MISSES.MISS_CAUSES_A_WALK */
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- },
- [ C(BPU ) ] = {
- [ C(OP_READ) ] = {
- [ C(RESULT_ACCESS) ] = 0xc4, /* BR_INST_RETIRED.ALL_BRANCHES */
- [ C(RESULT_MISS) ] = 0xc5, /* BR_MISP_RETIRED.ALL_BRANCHES */
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = -1,
- [ C(RESULT_MISS) ] = -1,
- },
- },
-};
-
-static __initconst const u64 hsw_hw_cache_extra_regs
- [PERF_COUNT_HW_CACHE_MAX]
- [PERF_COUNT_HW_CACHE_OP_MAX]
- [PERF_COUNT_HW_CACHE_RESULT_MAX] =
-{
- [ C(LL ) ] = {
- [ C(OP_READ) ] = {
- /* OFFCORE_RESPONSE:ALL_DATA_RD|ALL_CODE_RD */
- [ C(RESULT_ACCESS) ] = 0x2d5,
- /* OFFCORE_RESPONSE:ALL_DATA_RD|ALL_CODE_RD|SUPPLIER_NONE|
- L3_MISS|ANY_SNOOP */
- [ C(RESULT_MISS) ] = 0x3fbc0202d5ull,
- },
- [ C(OP_WRITE) ] = {
- [ C(RESULT_ACCESS) ] = 0x122, /* OFFCORE_RESPONSE:ALL_RFO */
- /* OFFCORE_RESPONSE:ALL_RFO|SUPPLIER_NONE|L3_MISS|ANY_SNOOP */
- [ C(RESULT_MISS) ] = 0x3fbc020122ull,
- },
- [ C(OP_PREFETCH) ] = {
- [ C(RESULT_ACCESS) ] = 0x0,
- [ C(RESULT_MISS) ] = 0x0,
- },
- },
-};
-
static __initconst const u64 westmere_hw_cache_event_ids
[PERF_COUNT_HW_CACHE_MAX]
[PERF_COUNT_HW_CACHE_OP_MAX]
return c;
}
-/*
- * Broadwell:
- * The INST_RETIRED.ALL period always needs to have lowest
- * 6bits cleared (BDM57). It shall not use a period smaller
- * than 100 (BDM11). We combine the two to enforce
- * a min-period of 128.
- */
-static unsigned bdw_limit_period(struct perf_event *event, unsigned left)
-{
- if ((event->hw.config & INTEL_ARCH_EVENT_MASK) ==
- X86_CONFIG(.event=0xc0, .umask=0x01)) {
- if (left < 128)
- left = 128;
- left &= ~0x3fu;
- }
- return left;
-}
-
PMU_FORMAT_ATTR(event, "config:0-7" );
PMU_FORMAT_ATTR(umask, "config:8-15" );
PMU_FORMAT_ATTR(edge, "config:18" );
case 69: /* 22nm Haswell ULT */
case 70: /* 22nm Haswell + GT3e (Intel Iris Pro graphics) */
x86_pmu.late_ack = true;
- memcpy(hw_cache_event_ids, hsw_hw_cache_event_ids, sizeof(hw_cache_event_ids));
- memcpy(hw_cache_extra_regs, hsw_hw_cache_extra_regs, sizeof(hw_cache_extra_regs));
+ memcpy(hw_cache_event_ids, snb_hw_cache_event_ids, sizeof(hw_cache_event_ids));
+ memcpy(hw_cache_extra_regs, snb_hw_cache_extra_regs, sizeof(hw_cache_extra_regs));
intel_pmu_lbr_init_snb();
pr_cont("Haswell events, ");
break;
- case 61: /* 14nm Broadwell Core-M */
- x86_pmu.late_ack = true;
- memcpy(hw_cache_event_ids, hsw_hw_cache_event_ids, sizeof(hw_cache_event_ids));
- memcpy(hw_cache_extra_regs, hsw_hw_cache_extra_regs, sizeof(hw_cache_extra_regs));
-
- intel_pmu_lbr_init_snb();
-
- x86_pmu.event_constraints = intel_bdw_event_constraints;
- x86_pmu.pebs_constraints = intel_hsw_pebs_event_constraints;
- x86_pmu.extra_regs = intel_snbep_extra_regs;
- x86_pmu.pebs_aliases = intel_pebs_aliases_snb;
- /* all extra regs are per-cpu when HT is on */
- x86_pmu.er_flags |= ERF_HAS_RSP_1;
- x86_pmu.er_flags |= ERF_NO_HT_SHARING;
-
- x86_pmu.hw_config = hsw_hw_config;
- x86_pmu.get_event_constraints = hsw_get_event_constraints;
- x86_pmu.cpu_events = hsw_events_attrs;
- x86_pmu.limit_period = bdw_limit_period;
- pr_cont("Broadwell events, ");
- break;
-
default:
switch (x86_pmu.version) {
case 1:
* PEBS
*/
struct event_constraint intel_core2_pebs_event_constraints[] = {
- INTEL_UEVENT_CONSTRAINT(0x00c0, 0x1), /* INST_RETIRED.ANY */
- INTEL_UEVENT_CONSTRAINT(0xfec1, 0x1), /* X87_OPS_RETIRED.ANY */
- INTEL_UEVENT_CONSTRAINT(0x00c5, 0x1), /* BR_INST_RETIRED.MISPRED */
- INTEL_UEVENT_CONSTRAINT(0x1fc7, 0x1), /* SIMD_INST_RETURED.ANY */
- INTEL_EVENT_CONSTRAINT(0xcb, 0x1), /* MEM_LOAD_RETIRED.* */
+ INTEL_FLAGS_UEVENT_CONSTRAINT(0x00c0, 0x1), /* INST_RETIRED.ANY */
+ INTEL_FLAGS_UEVENT_CONSTRAINT(0xfec1, 0x1), /* X87_OPS_RETIRED.ANY */
+ INTEL_FLAGS_UEVENT_CONSTRAINT(0x00c5, 0x1), /* BR_INST_RETIRED.MISPRED */
+ INTEL_FLAGS_UEVENT_CONSTRAINT(0x1fc7, 0x1), /* SIMD_INST_RETURED.ANY */
+ INTEL_FLAGS_EVENT_CONSTRAINT(0xcb, 0x1), /* MEM_LOAD_RETIRED.* */
EVENT_CONSTRAINT_END
};
struct event_constraint intel_atom_pebs_event_constraints[] = {
- INTEL_UEVENT_CONSTRAINT(0x00c0, 0x1), /* INST_RETIRED.ANY */
- INTEL_UEVENT_CONSTRAINT(0x00c5, 0x1), /* MISPREDICTED_BRANCH_RETIRED */
- INTEL_EVENT_CONSTRAINT(0xcb, 0x1), /* MEM_LOAD_RETIRED.* */
+ INTEL_FLAGS_UEVENT_CONSTRAINT(0x00c0, 0x1), /* INST_RETIRED.ANY */
+ INTEL_FLAGS_UEVENT_CONSTRAINT(0x00c5, 0x1), /* MISPREDICTED_BRANCH_RETIRED */
+ INTEL_FLAGS_EVENT_CONSTRAINT(0xcb, 0x1), /* MEM_LOAD_RETIRED.* */
EVENT_CONSTRAINT_END
};
struct event_constraint intel_nehalem_pebs_event_constraints[] = {
INTEL_PLD_CONSTRAINT(0x100b, 0xf), /* MEM_INST_RETIRED.* */
- INTEL_EVENT_CONSTRAINT(0x0f, 0xf), /* MEM_UNCORE_RETIRED.* */
- INTEL_UEVENT_CONSTRAINT(0x010c, 0xf), /* MEM_STORE_RETIRED.DTLB_MISS */
- INTEL_EVENT_CONSTRAINT(0xc0, 0xf), /* INST_RETIRED.ANY */
+ INTEL_FLAGS_EVENT_CONSTRAINT(0x0f, 0xf), /* MEM_UNCORE_RETIRED.* */
+ INTEL_FLAGS_UEVENT_CONSTRAINT(0x010c, 0xf), /* MEM_STORE_RETIRED.DTLB_MISS */
+ INTEL_FLAGS_EVENT_CONSTRAINT(0xc0, 0xf), /* INST_RETIRED.ANY */
INTEL_EVENT_CONSTRAINT(0xc2, 0xf), /* UOPS_RETIRED.* */
- INTEL_EVENT_CONSTRAINT(0xc4, 0xf), /* BR_INST_RETIRED.* */
- INTEL_UEVENT_CONSTRAINT(0x02c5, 0xf), /* BR_MISP_RETIRED.NEAR_CALL */
- INTEL_EVENT_CONSTRAINT(0xc7, 0xf), /* SSEX_UOPS_RETIRED.* */
- INTEL_UEVENT_CONSTRAINT(0x20c8, 0xf), /* ITLB_MISS_RETIRED */
- INTEL_EVENT_CONSTRAINT(0xcb, 0xf), /* MEM_LOAD_RETIRED.* */
- INTEL_EVENT_CONSTRAINT(0xf7, 0xf), /* FP_ASSIST.* */
+ INTEL_FLAGS_EVENT_CONSTRAINT(0xc4, 0xf), /* BR_INST_RETIRED.* */
+ INTEL_FLAGS_UEVENT_CONSTRAINT(0x02c5, 0xf), /* BR_MISP_RETIRED.NEAR_CALL */
+ INTEL_FLAGS_EVENT_CONSTRAINT(0xc7, 0xf), /* SSEX_UOPS_RETIRED.* */
+ INTEL_FLAGS_UEVENT_CONSTRAINT(0x20c8, 0xf), /* ITLB_MISS_RETIRED */
+ INTEL_FLAGS_EVENT_CONSTRAINT(0xcb, 0xf), /* MEM_LOAD_RETIRED.* */
+ INTEL_FLAGS_EVENT_CONSTRAINT(0xf7, 0xf), /* FP_ASSIST.* */
EVENT_CONSTRAINT_END
};
struct event_constraint intel_westmere_pebs_event_constraints[] = {
INTEL_PLD_CONSTRAINT(0x100b, 0xf), /* MEM_INST_RETIRED.* */
- INTEL_EVENT_CONSTRAINT(0x0f, 0xf), /* MEM_UNCORE_RETIRED.* */
- INTEL_UEVENT_CONSTRAINT(0x010c, 0xf), /* MEM_STORE_RETIRED.DTLB_MISS */
- INTEL_EVENT_CONSTRAINT(0xc0, 0xf), /* INSTR_RETIRED.* */
+ INTEL_FLAGS_EVENT_CONSTRAINT(0x0f, 0xf), /* MEM_UNCORE_RETIRED.* */
+ INTEL_FLAGS_UEVENT_CONSTRAINT(0x010c, 0xf), /* MEM_STORE_RETIRED.DTLB_MISS */
+ INTEL_FLAGS_EVENT_CONSTRAINT(0xc0, 0xf), /* INSTR_RETIRED.* */
INTEL_EVENT_CONSTRAINT(0xc2, 0xf), /* UOPS_RETIRED.* */
- INTEL_EVENT_CONSTRAINT(0xc4, 0xf), /* BR_INST_RETIRED.* */
- INTEL_EVENT_CONSTRAINT(0xc5, 0xf), /* BR_MISP_RETIRED.* */
- INTEL_EVENT_CONSTRAINT(0xc7, 0xf), /* SSEX_UOPS_RETIRED.* */
- INTEL_UEVENT_CONSTRAINT(0x20c8, 0xf), /* ITLB_MISS_RETIRED */
- INTEL_EVENT_CONSTRAINT(0xcb, 0xf), /* MEM_LOAD_RETIRED.* */
- INTEL_EVENT_CONSTRAINT(0xf7, 0xf), /* FP_ASSIST.* */
+ INTEL_FLAGS_EVENT_CONSTRAINT(0xc4, 0xf), /* BR_INST_RETIRED.* */
+ INTEL_FLAGS_EVENT_CONSTRAINT(0xc5, 0xf), /* BR_MISP_RETIRED.* */
+ INTEL_FLAGS_EVENT_CONSTRAINT(0xc7, 0xf), /* SSEX_UOPS_RETIRED.* */
+ INTEL_FLAGS_UEVENT_CONSTRAINT(0x20c8, 0xf), /* ITLB_MISS_RETIRED */
+ INTEL_FLAGS_EVENT_CONSTRAINT(0xcb, 0xf), /* MEM_LOAD_RETIRED.* */
+ INTEL_FLAGS_EVENT_CONSTRAINT(0xf7, 0xf), /* FP_ASSIST.* */
EVENT_CONSTRAINT_END
};
struct event_constraint intel_snb_pebs_event_constraints[] = {
- INTEL_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PRECDIST */
+ INTEL_FLAGS_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PRECDIST */
INTEL_PLD_CONSTRAINT(0x01cd, 0x8), /* MEM_TRANS_RETIRED.LAT_ABOVE_THR */
INTEL_PST_CONSTRAINT(0x02cd, 0x8), /* MEM_TRANS_RETIRED.PRECISE_STORES */
/* UOPS_RETIRED.ALL, inv=1, cmask=16 (cycles:p). */
};
struct event_constraint intel_ivb_pebs_event_constraints[] = {
- INTEL_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PRECDIST */
+ INTEL_FLAGS_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PRECDIST */
INTEL_PLD_CONSTRAINT(0x01cd, 0x8), /* MEM_TRANS_RETIRED.LAT_ABOVE_THR */
INTEL_PST_CONSTRAINT(0x02cd, 0x8), /* MEM_TRANS_RETIRED.PRECISE_STORES */
/* UOPS_RETIRED.ALL, inv=1, cmask=16 (cycles:p). */
};
struct event_constraint intel_hsw_pebs_event_constraints[] = {
- INTEL_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PRECDIST */
+ INTEL_FLAGS_UEVENT_CONSTRAINT(0x01c0, 0x2), /* INST_RETIRED.PRECDIST */
INTEL_PLD_CONSTRAINT(0x01cd, 0xf), /* MEM_TRANS_RETIRED.* */
/* UOPS_RETIRED.ALL, inv=1, cmask=16 (cycles:p). */
INTEL_FLAGS_EVENT_CONSTRAINT(0x108001c2, 0xf),
regs.bp = pebs->bp;
regs.sp = pebs->sp;
+ if (sample_type & PERF_SAMPLE_REGS_INTR) {
+ regs.ax = pebs->ax;
+ regs.bx = pebs->bx;
+ regs.cx = pebs->cx;
+ regs.dx = pebs->dx;
+ regs.si = pebs->si;
+ regs.di = pebs->di;
+ regs.bp = pebs->bp;
+ regs.sp = pebs->sp;
+
+ regs.flags = pebs->flags;
+#ifndef CONFIG_X86_32
+ regs.r8 = pebs->r8;
+ regs.r9 = pebs->r9;
+ regs.r10 = pebs->r10;
+ regs.r11 = pebs->r11;
+ regs.r12 = pebs->r12;
+ regs.r13 = pebs->r13;
+ regs.r14 = pebs->r14;
+ regs.r15 = pebs->r15;
+#endif
+ }
+
if (event->attr.precise_ip > 1 && x86_pmu.intel_cap.pebs_format >= 2) {
regs.ip = pebs->real_ip;
regs.flags |= PERF_EFLAGS_EXACT;
static struct uncore_event_desc snbep_uncore_imc_events[] = {
INTEL_UNCORE_EVENT_DESC(clockticks, "event=0xff,umask=0x00"),
INTEL_UNCORE_EVENT_DESC(cas_count_read, "event=0x04,umask=0x03"),
+ INTEL_UNCORE_EVENT_DESC(cas_count_read.scale, "6.103515625e-5"),
+ INTEL_UNCORE_EVENT_DESC(cas_count_read.unit, "MiB"),
INTEL_UNCORE_EVENT_DESC(cas_count_write, "event=0x04,umask=0x0c"),
+ INTEL_UNCORE_EVENT_DESC(cas_count_write.scale, "6.103515625e-5"),
+ INTEL_UNCORE_EVENT_DESC(cas_count_write.unit, "MiB"),
{ /* end: all zeroes */ },
};
.attrs = snbep_uncore_qpi_formats_attr,
};
-#define SNBEP_UNCORE_MSR_OPS_COMMON_INIT() \
- .init_box = snbep_uncore_msr_init_box, \
+#define __SNBEP_UNCORE_MSR_OPS_COMMON_INIT() \
.disable_box = snbep_uncore_msr_disable_box, \
.enable_box = snbep_uncore_msr_enable_box, \
.disable_event = snbep_uncore_msr_disable_event, \
.enable_event = snbep_uncore_msr_enable_event, \
.read_counter = uncore_msr_read_counter
+#define SNBEP_UNCORE_MSR_OPS_COMMON_INIT() \
+ __SNBEP_UNCORE_MSR_OPS_COMMON_INIT(), \
+ .init_box = snbep_uncore_msr_init_box \
+
static struct intel_uncore_ops snbep_uncore_msr_ops = {
SNBEP_UNCORE_MSR_OPS_COMMON_INIT(),
};
.format_group = &hswep_uncore_cbox_format_group,
};
+/*
+ * Write SBOX Initialization register bit by bit to avoid spurious #GPs
+ */
+static void hswep_uncore_sbox_msr_init_box(struct intel_uncore_box *box)
+{
+ unsigned msr = uncore_msr_box_ctl(box);
+
+ if (msr) {
+ u64 init = SNBEP_PMON_BOX_CTL_INT;
+ u64 flags = 0;
+ int i;
+
+ for_each_set_bit(i, (unsigned long *)&init, 64) {
+ flags |= (1ULL << i);
+ wrmsrl(msr, flags);
+ }
+ }
+}
+
+static struct intel_uncore_ops hswep_uncore_sbox_msr_ops = {
+ __SNBEP_UNCORE_MSR_OPS_COMMON_INIT(),
+ .init_box = hswep_uncore_sbox_msr_init_box
+};
+
static struct attribute *hswep_uncore_sbox_formats_attr[] = {
&format_attr_event.attr,
&format_attr_umask.attr,
.event_mask = HSWEP_S_MSR_PMON_RAW_EVENT_MASK,
.box_ctl = HSWEP_S0_MSR_PMON_BOX_CTL,
.msr_offset = HSWEP_SBOX_MSR_OFFSET,
- .ops = &snbep_uncore_msr_ops,
+ .ops = &hswep_uncore_sbox_msr_ops,
.format_group = &hswep_uncore_sbox_format_group,
};
static struct uncore_event_desc hswep_uncore_imc_events[] = {
INTEL_UNCORE_EVENT_DESC(clockticks, "event=0x00,umask=0x00"),
INTEL_UNCORE_EVENT_DESC(cas_count_read, "event=0x04,umask=0x03"),
+ INTEL_UNCORE_EVENT_DESC(cas_count_read.scale, "6.103515625e-5"),
+ INTEL_UNCORE_EVENT_DESC(cas_count_read.unit, "MiB"),
INTEL_UNCORE_EVENT_DESC(cas_count_write, "event=0x04,umask=0x0c"),
+ INTEL_UNCORE_EVENT_DESC(cas_count_write.scale, "6.103515625e-5"),
+ INTEL_UNCORE_EVENT_DESC(cas_count_write.unit, "MiB"),
{ /* end: all zeroes */ },
};
SNBEP_UNCORE_PCI_COMMON_INIT(),
};
+static unsigned hswep_uncore_irp_ctrs[] = {0xa0, 0xa8, 0xb0, 0xb8};
+
+static u64 hswep_uncore_irp_read_counter(struct intel_uncore_box *box, struct perf_event *event)
+{
+ struct pci_dev *pdev = box->pci_dev;
+ struct hw_perf_event *hwc = &event->hw;
+ u64 count = 0;
+
+ pci_read_config_dword(pdev, hswep_uncore_irp_ctrs[hwc->idx], (u32 *)&count);
+ pci_read_config_dword(pdev, hswep_uncore_irp_ctrs[hwc->idx] + 4, (u32 *)&count + 1);
+
+ return count;
+}
+
static struct intel_uncore_ops hswep_uncore_irp_ops = {
.init_box = snbep_uncore_pci_init_box,
.disable_box = snbep_uncore_pci_disable_box,
.enable_box = snbep_uncore_pci_enable_box,
.disable_event = ivbep_uncore_irp_disable_event,
.enable_event = ivbep_uncore_irp_enable_event,
- .read_counter = ivbep_uncore_irp_read_counter,
+ .read_counter = hswep_uncore_irp_read_counter,
};
static struct intel_uncore_type hswep_uncore_irp = {
[ DEBUG_STACK-1 ] = "#DB",
[ NMI_STACK-1 ] = "NMI",
[ DOUBLEFAULT_STACK-1 ] = "#DF",
- [ STACKFAULT_STACK-1 ] = "#SS",
[ MCE_STACK-1 ] = "#MC",
#if DEBUG_STKSZ > EXCEPTION_STKSZ
[ N_EXCEPTION_STACKS ...
sysenter_audit:
testl $(_TIF_WORK_SYSCALL_ENTRY & ~_TIF_SYSCALL_AUDIT),TI_flags(%ebp)
jnz syscall_trace_entry
- addl $4,%esp
- CFI_ADJUST_CFA_OFFSET -4
- movl %esi,4(%esp) /* 5th arg: 4th syscall arg */
- movl %edx,(%esp) /* 4th arg: 3rd syscall arg */
- /* %ecx already in %ecx 3rd arg: 2nd syscall arg */
- movl %ebx,%edx /* 2nd arg: 1st syscall arg */
- /* %eax already in %eax 1st arg: syscall number */
+ /* movl PT_EAX(%esp), %eax already set, syscall number: 1st arg to audit */
+ movl PT_EBX(%esp), %edx /* ebx/a0: 2nd arg to audit */
+ /* movl PT_ECX(%esp), %ecx already set, a1: 3nd arg to audit */
+ pushl_cfi PT_ESI(%esp) /* a3: 5th arg */
+ pushl_cfi PT_EDX+4(%esp) /* a2: 4th arg */
call __audit_syscall_entry
- pushl_cfi %ebx
+ popl_cfi %ecx /* get that remapped edx off the stack */
+ popl_cfi %ecx /* get that remapped esi off the stack */
movl PT_EAX(%esp),%eax /* reload syscall number */
jmp sysenter_do_call
jnz native_irq_return_ldt
#endif
+.global native_irq_return_iret
native_irq_return_iret:
+ /*
+ * This may fault. Non-paranoid faults on return to userspace are
+ * handled by fixup_bad_iret. These include #SS, #GP, and #NP.
+ * Double-faults due to espfix64 are handled in do_double_fault.
+ * Other faults here are fatal.
+ */
iretq
- _ASM_EXTABLE(native_irq_return_iret, bad_iret)
#ifdef CONFIG_X86_ESPFIX64
native_irq_return_ldt:
jmp native_irq_return_iret
#endif
- .section .fixup,"ax"
-bad_iret:
- /*
- * The iret traps when the %cs or %ss being restored is bogus.
- * We've lost the original trap vector and error code.
- * #GPF is the most likely one to get for an invalid selector.
- * So pretend we completed the iret and took the #GPF in user mode.
- *
- * We are now running with the kernel GS after exception recovery.
- * But error_entry expects us to have user GS to match the user %cs,
- * so swap back.
- */
- pushq $0
-
- SWAPGS
- jmp general_protection
-
- .previous
-
/* edi: workmask, edx: work */
retint_careful:
CFI_RESTORE_STATE
CFI_ENDPROC
END(common_interrupt)
- /*
- * If IRET takes a fault on the espfix stack, then we
- * end up promoting it to a doublefault. In that case,
- * modify the stack to make it look like we just entered
- * the #GP handler from user space, similar to bad_iret.
- */
-#ifdef CONFIG_X86_ESPFIX64
- ALIGN
-__do_double_fault:
- XCPT_FRAME 1 RDI+8
- movq RSP(%rdi),%rax /* Trap on the espfix stack? */
- sarq $PGDIR_SHIFT,%rax
- cmpl $ESPFIX_PGD_ENTRY,%eax
- jne do_double_fault /* No, just deliver the fault */
- cmpl $__KERNEL_CS,CS(%rdi)
- jne do_double_fault
- movq RIP(%rdi),%rax
- cmpq $native_irq_return_iret,%rax
- jne do_double_fault /* This shouldn't happen... */
- movq PER_CPU_VAR(kernel_stack),%rax
- subq $(6*8-KERNEL_STACK_OFFSET),%rax /* Reset to original stack */
- movq %rax,RSP(%rdi)
- movq $0,(%rax) /* Missing (lost) #GP error code */
- movq $general_protection,RIP(%rdi)
- retq
- CFI_ENDPROC
-END(__do_double_fault)
-#else
-# define __do_double_fault do_double_fault
-#endif
-
/*
* APIC interrupts.
*/
idtentry bounds do_bounds has_error_code=0
idtentry invalid_op do_invalid_op has_error_code=0
idtentry device_not_available do_device_not_available has_error_code=0
-idtentry double_fault __do_double_fault has_error_code=1 paranoid=1
+idtentry double_fault do_double_fault has_error_code=1 paranoid=1
idtentry coprocessor_segment_overrun do_coprocessor_segment_overrun has_error_code=0
idtentry invalid_TSS do_invalid_TSS has_error_code=1
idtentry segment_not_present do_segment_not_present has_error_code=1
idtentry debug do_debug has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK
idtentry int3 do_int3 has_error_code=0 paranoid=1 shift_ist=DEBUG_STACK
-idtentry stack_segment do_stack_segment has_error_code=1 paranoid=1
+idtentry stack_segment do_stack_segment has_error_code=1
#ifdef CONFIG_XEN
idtentry xen_debug do_debug has_error_code=0
idtentry xen_int3 do_int3 has_error_code=0
/*
* There are two places in the kernel that can potentially fault with
- * usergs. Handle them here. The exception handlers after iret run with
- * kernel gs again, so don't set the user space flag. B stepping K8s
- * sometimes report an truncated RIP for IRET exceptions returning to
- * compat mode. Check for these here too.
+ * usergs. Handle them here. B stepping K8s sometimes report a
+ * truncated RIP for IRET exceptions returning to compat mode. Check
+ * for these here too.
*/
error_kernelspace:
CFI_REL_OFFSET rcx, RCX+8
incl %ebx
leaq native_irq_return_iret(%rip),%rcx
cmpq %rcx,RIP+8(%rsp)
- je error_swapgs
+ je error_bad_iret
movl %ecx,%eax /* zero extend */
cmpq %rax,RIP+8(%rsp)
je bstep_iret
bstep_iret:
/* Fix truncated RIP */
movq %rcx,RIP+8(%rsp)
- jmp error_swapgs
+ /* fall through */
+
+error_bad_iret:
+ SWAPGS
+ mov %rsp,%rdi
+ call fixup_bad_iret
+ mov %rax,%rsp
+ decl %ebx /* Return to usergs */
+ jmp error_sti
CFI_ENDPROC
END(error_entry)
{
disable_irq_nosync(irq);
io_apic_irqs &= ~(1<<irq);
- irq_set_chip_and_handler_name(irq, &i8259A_chip, handle_level_irq,
- i8259A_chip.name);
+ irq_set_chip_and_handler(irq, &i8259A_chip, handle_level_irq);
enable_irq(irq);
}
void __init init_ISA_irqs(void)
{
struct irq_chip *chip = legacy_pic->chip;
- const char *name = chip->name;
int i;
#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
legacy_pic->init(0);
for (i = 0; i < nr_legacy_irqs(); i++)
- irq_set_chip_and_handler_name(i, chip, handle_level_irq, name);
+ irq_set_chip_and_handler(i, chip, handle_level_irq);
}
void __init init_IRQ(void)
*/
if (work & _TIF_NOHZ) {
user_exit();
- work &= ~TIF_NOHZ;
+ work &= ~_TIF_NOHZ;
}
#ifdef CONFIG_SECCOMP
setup_real_mode();
memblock_set_current_limit(get_max_mapped());
- dma_contiguous_reserve(max_pfn_mapped << PAGE_SHIFT);
/*
* NOTE: On x86-32, only from this point on, fixmaps are ready for use.
early_acpi_boot_init();
initmem_init();
+ dma_contiguous_reserve(max_pfn_mapped << PAGE_SHIFT);
/*
* Reserve memory for crash kernel after SRAT is parsed so that it
DEFINE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info);
EXPORT_PER_CPU_SYMBOL(cpu_info);
-static DEFINE_PER_CPU(struct completion, die_complete);
-
atomic_t init_deasserted;
/*
numa_remove_cpu(cpu);
}
+static DEFINE_PER_CPU(struct completion, die_complete);
+
void cpu_disable_common(void)
{
int cpu = smp_processor_id();
+ init_completion(&per_cpu(die_complete, smp_processor_id()));
+
remove_siblinginfo(cpu);
/* It's now safe to remove this processor from the online map */
return ret;
clear_local_APIC();
- init_completion(&per_cpu(die_complete, smp_processor_id()));
cpu_disable_common();
return 0;
}
+void cpu_die_common(unsigned int cpu)
+{
+ wait_for_completion_timeout(&per_cpu(die_complete, cpu), HZ);
+}
+
void native_cpu_die(unsigned int cpu)
{
/* We don't do anything here: idle task is faking death itself. */
- wait_for_completion_timeout(&per_cpu(die_complete, cpu), HZ);
+
+ cpu_die_common(cpu);
/* They ack this in play_dead() by setting CPU_DEAD */
if (per_cpu(cpu_state, cpu) == CPU_DEAD) {
DO_ERROR(X86_TRAP_OLD_MF, SIGFPE, "coprocessor segment overrun",coprocessor_segment_overrun)
DO_ERROR(X86_TRAP_TS, SIGSEGV, "invalid TSS", invalid_TSS)
DO_ERROR(X86_TRAP_NP, SIGBUS, "segment not present", segment_not_present)
-#ifdef CONFIG_X86_32
DO_ERROR(X86_TRAP_SS, SIGBUS, "stack segment", stack_segment)
-#endif
DO_ERROR(X86_TRAP_AC, SIGBUS, "alignment check", alignment_check)
#ifdef CONFIG_X86_64
/* Runs on IST stack */
-dotraplinkage void do_stack_segment(struct pt_regs *regs, long error_code)
-{
- enum ctx_state prev_state;
-
- prev_state = exception_enter();
- if (notify_die(DIE_TRAP, "stack segment", regs, error_code,
- X86_TRAP_SS, SIGBUS) != NOTIFY_STOP) {
- preempt_conditional_sti(regs);
- do_trap(X86_TRAP_SS, SIGBUS, "stack segment", regs, error_code, NULL);
- preempt_conditional_cli(regs);
- }
- exception_exit(prev_state);
-}
-
dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code)
{
static const char str[] = "double fault";
struct task_struct *tsk = current;
+#ifdef CONFIG_X86_ESPFIX64
+ extern unsigned char native_irq_return_iret[];
+
+ /*
+ * If IRET takes a non-IST fault on the espfix64 stack, then we
+ * end up promoting it to a doublefault. In that case, modify
+ * the stack to make it look like we just entered the #GP
+ * handler from user space, similar to bad_iret.
+ */
+ if (((long)regs->sp >> PGDIR_SHIFT) == ESPFIX_PGD_ENTRY &&
+ regs->cs == __KERNEL_CS &&
+ regs->ip == (unsigned long)native_irq_return_iret)
+ {
+ struct pt_regs *normal_regs = task_pt_regs(current);
+
+ /* Fake a #GP(0) from userspace. */
+ memmove(&normal_regs->ip, (void *)regs->sp, 5*8);
+ normal_regs->orig_ax = 0; /* Missing (lost) #GP error code */
+ regs->ip = (unsigned long)general_protection;
+ regs->sp = (unsigned long)&normal_regs->orig_ax;
+ return;
+ }
+#endif
+
exception_enter();
/* Return not checked because double check cannot be ignored */
notify_die(DIE_TRAP, str, regs, error_code, X86_TRAP_DF, SIGSEGV);
* for scheduling or signal handling. The actual stack switch is done in
* entry.S
*/
-asmlinkage __visible struct pt_regs *sync_regs(struct pt_regs *eregs)
+asmlinkage __visible notrace struct pt_regs *sync_regs(struct pt_regs *eregs)
{
struct pt_regs *regs = eregs;
/* Did already sync */
return regs;
}
NOKPROBE_SYMBOL(sync_regs);
+
+struct bad_iret_stack {
+ void *error_entry_ret;
+ struct pt_regs regs;
+};
+
+asmlinkage __visible notrace
+struct bad_iret_stack *fixup_bad_iret(struct bad_iret_stack *s)
+{
+ /*
+ * This is called from entry_64.S early in handling a fault
+ * caused by a bad iret to user mode. To handle the fault
+ * correctly, we want move our stack frame to task_pt_regs
+ * and we want to pretend that the exception came from the
+ * iret target.
+ */
+ struct bad_iret_stack *new_stack =
+ container_of(task_pt_regs(current),
+ struct bad_iret_stack, regs);
+
+ /* Copy the IRET target to the new stack. */
+ memmove(&new_stack->regs.ip, (void *)s->regs.sp, 5*8);
+
+ /* Copy the remainder of the stack from the current stack. */
+ memmove(new_stack, s, offsetof(struct bad_iret_stack, regs.ip));
+
+ BUG_ON(!user_mode_vm(&new_stack->regs));
+ return new_stack;
+}
+NOKPROBE_SYMBOL(fixup_bad_iret);
#endif
/*
set_intr_gate(X86_TRAP_OLD_MF, coprocessor_segment_overrun);
set_intr_gate(X86_TRAP_TS, invalid_TSS);
set_intr_gate(X86_TRAP_NP, segment_not_present);
- set_intr_gate_ist(X86_TRAP_SS, &stack_segment, STACKFAULT_STACK);
+ set_intr_gate(X86_TRAP_SS, stack_segment);
set_intr_gate(X86_TRAP_GP, general_protection);
set_intr_gate(X86_TRAP_SPURIOUS, spurious_interrupt_bug);
set_intr_gate(X86_TRAP_MF, coprocessor_error);
x86_init.timers.tsc_pre_init();
- if (!cpu_has_tsc)
+ if (!cpu_has_tsc) {
+ setup_clear_cpu_cap(X86_FEATURE_TSC_DEADLINE_TIMER);
return;
+ }
tsc_khz = x86_platform.calibrate_tsc();
cpu_khz = tsc_khz;
if (!tsc_khz) {
mark_tsc_unstable("could not calculate TSC khz");
+ setup_clear_cpu_cap(X86_FEATURE_TSC_DEADLINE_TIMER);
return;
}
masked_increment(reg_rmw(ctxt, VCPU_REGS_RSP), stack_mask(ctxt), inc);
}
-static inline void jmp_rel(struct x86_emulate_ctxt *ctxt, int rel)
-{
- register_address_increment(ctxt, &ctxt->_eip, rel);
-}
-
static u32 desc_limit_scaled(struct desc_struct *desc)
{
u32 limit = get_desc_limit(desc);
return emulate_exception(ctxt, NM_VECTOR, 0, false);
}
+static inline int assign_eip_far(struct x86_emulate_ctxt *ctxt, ulong dst,
+ int cs_l)
+{
+ switch (ctxt->op_bytes) {
+ case 2:
+ ctxt->_eip = (u16)dst;
+ break;
+ case 4:
+ ctxt->_eip = (u32)dst;
+ break;
+#ifdef CONFIG_X86_64
+ case 8:
+ if ((cs_l && is_noncanonical_address(dst)) ||
+ (!cs_l && (dst >> 32) != 0))
+ return emulate_gp(ctxt, 0);
+ ctxt->_eip = dst;
+ break;
+#endif
+ default:
+ WARN(1, "unsupported eip assignment size\n");
+ }
+ return X86EMUL_CONTINUE;
+}
+
+static inline int assign_eip_near(struct x86_emulate_ctxt *ctxt, ulong dst)
+{
+ return assign_eip_far(ctxt, dst, ctxt->mode == X86EMUL_MODE_PROT64);
+}
+
+static inline int jmp_rel(struct x86_emulate_ctxt *ctxt, int rel)
+{
+ return assign_eip_near(ctxt, ctxt->_eip + rel);
+}
+
static u16 get_segment_selector(struct x86_emulate_ctxt *ctxt, unsigned seg)
{
u16 selector;
static int __linearize(struct x86_emulate_ctxt *ctxt,
struct segmented_address addr,
- unsigned size, bool write, bool fetch,
+ unsigned *max_size, unsigned size,
+ bool write, bool fetch,
ulong *linear)
{
struct desc_struct desc;
unsigned cpl;
la = seg_base(ctxt, addr.seg) + addr.ea;
+ *max_size = 0;
switch (ctxt->mode) {
case X86EMUL_MODE_PROT64:
if (((signed long)la << 16) >> 16 != la)
return emulate_gp(ctxt, 0);
+
+ *max_size = min_t(u64, ~0u, (1ull << 48) - la);
+ if (size > *max_size)
+ goto bad;
break;
default:
usable = ctxt->ops->get_segment(ctxt, &sel, &desc, NULL,
if ((ctxt->mode == X86EMUL_MODE_REAL) && !fetch &&
(ctxt->d & NoBigReal)) {
/* la is between zero and 0xffff */
- if (la > 0xffff || (u32)(la + size - 1) > 0xffff)
+ if (la > 0xffff)
goto bad;
+ *max_size = 0x10000 - la;
} else if ((desc.type & 8) || !(desc.type & 4)) {
/* expand-up segment */
- if (addr.ea > lim || (u32)(addr.ea + size - 1) > lim)
+ if (addr.ea > lim)
goto bad;
+ *max_size = min_t(u64, ~0u, (u64)lim + 1 - addr.ea);
} else {
/* expand-down segment */
- if (addr.ea <= lim || (u32)(addr.ea + size - 1) <= lim)
+ if (addr.ea <= lim)
goto bad;
lim = desc.d ? 0xffffffff : 0xffff;
- if (addr.ea > lim || (u32)(addr.ea + size - 1) > lim)
+ if (addr.ea > lim)
goto bad;
+ *max_size = min_t(u64, ~0u, (u64)lim + 1 - addr.ea);
}
+ if (size > *max_size)
+ goto bad;
cpl = ctxt->ops->cpl(ctxt);
if (!(desc.type & 8)) {
/* data segment */
return X86EMUL_CONTINUE;
bad:
if (addr.seg == VCPU_SREG_SS)
- return emulate_ss(ctxt, sel);
+ return emulate_ss(ctxt, 0);
else
- return emulate_gp(ctxt, sel);
+ return emulate_gp(ctxt, 0);
}
static int linearize(struct x86_emulate_ctxt *ctxt,
unsigned size, bool write,
ulong *linear)
{
- return __linearize(ctxt, addr, size, write, false, linear);
+ unsigned max_size;
+ return __linearize(ctxt, addr, &max_size, size, write, false, linear);
}
static int __do_insn_fetch_bytes(struct x86_emulate_ctxt *ctxt, int op_size)
{
int rc;
- unsigned size;
+ unsigned size, max_size;
unsigned long linear;
int cur_size = ctxt->fetch.end - ctxt->fetch.data;
struct segmented_address addr = { .seg = VCPU_SREG_CS,
.ea = ctxt->eip + cur_size };
- size = 15UL ^ cur_size;
- rc = __linearize(ctxt, addr, size, false, true, &linear);
+ /*
+ * We do not know exactly how many bytes will be needed, and
+ * __linearize is expensive, so fetch as much as possible. We
+ * just have to avoid going beyond the 15 byte limit, the end
+ * of the segment, or the end of the page.
+ *
+ * __linearize is called with size 0 so that it does not do any
+ * boundary check itself. Instead, we use max_size to check
+ * against op_size.
+ */
+ rc = __linearize(ctxt, addr, &max_size, 0, false, true, &linear);
if (unlikely(rc != X86EMUL_CONTINUE))
return rc;
+ size = min_t(unsigned, 15UL ^ cur_size, max_size);
size = min_t(unsigned, size, PAGE_SIZE - offset_in_page(linear));
/*
* still, we must have hit the 15-byte boundary.
*/
if (unlikely(size < op_size))
- return X86EMUL_UNHANDLEABLE;
+ return emulate_gp(ctxt, 0);
+
rc = ctxt->ops->fetch(ctxt, linear, ctxt->fetch.end,
size, &ctxt->exception);
if (unlikely(rc != X86EMUL_CONTINUE))
static __always_inline int do_insn_fetch_bytes(struct x86_emulate_ctxt *ctxt,
unsigned size)
{
- if (unlikely(ctxt->fetch.end - ctxt->fetch.ptr < size))
- return __do_insn_fetch_bytes(ctxt, size);
+ unsigned done_size = ctxt->fetch.end - ctxt->fetch.ptr;
+
+ if (unlikely(done_size < size))
+ return __do_insn_fetch_bytes(ctxt, size - done_size);
else
return X86EMUL_CONTINUE;
}
/* Does not support long mode */
static int __load_segment_descriptor(struct x86_emulate_ctxt *ctxt,
- u16 selector, int seg, u8 cpl, bool in_task_switch)
+ u16 selector, int seg, u8 cpl,
+ bool in_task_switch,
+ struct desc_struct *desc)
{
struct desc_struct seg_desc, old_desc;
u8 dpl, rpl;
}
load:
ctxt->ops->set_segment(ctxt, selector, &seg_desc, base3, seg);
+ if (desc)
+ *desc = seg_desc;
return X86EMUL_CONTINUE;
exception:
return emulate_exception(ctxt, err_vec, err_code, true);
u16 selector, int seg)
{
u8 cpl = ctxt->ops->cpl(ctxt);
- return __load_segment_descriptor(ctxt, selector, seg, cpl, false);
+ return __load_segment_descriptor(ctxt, selector, seg, cpl, false, NULL);
}
static void write_register_operand(struct operand *op)
static int em_jmp_far(struct x86_emulate_ctxt *ctxt)
{
int rc;
- unsigned short sel;
+ unsigned short sel, old_sel;
+ struct desc_struct old_desc, new_desc;
+ const struct x86_emulate_ops *ops = ctxt->ops;
+ u8 cpl = ctxt->ops->cpl(ctxt);
+
+ /* Assignment of RIP may only fail in 64-bit mode */
+ if (ctxt->mode == X86EMUL_MODE_PROT64)
+ ops->get_segment(ctxt, &old_sel, &old_desc, NULL,
+ VCPU_SREG_CS);
memcpy(&sel, ctxt->src.valptr + ctxt->op_bytes, 2);
- rc = load_segment_descriptor(ctxt, sel, VCPU_SREG_CS);
+ rc = __load_segment_descriptor(ctxt, sel, VCPU_SREG_CS, cpl, false,
+ &new_desc);
if (rc != X86EMUL_CONTINUE)
return rc;
- ctxt->_eip = 0;
- memcpy(&ctxt->_eip, ctxt->src.valptr, ctxt->op_bytes);
- return X86EMUL_CONTINUE;
+ rc = assign_eip_far(ctxt, ctxt->src.val, new_desc.l);
+ if (rc != X86EMUL_CONTINUE) {
+ WARN_ON(ctxt->mode != X86EMUL_MODE_PROT64);
+ /* assigning eip failed; restore the old cs */
+ ops->set_segment(ctxt, old_sel, &old_desc, 0, VCPU_SREG_CS);
+ return rc;
+ }
+ return rc;
}
static int em_grp45(struct x86_emulate_ctxt *ctxt)
case 2: /* call near abs */ {
long int old_eip;
old_eip = ctxt->_eip;
- ctxt->_eip = ctxt->src.val;
+ rc = assign_eip_near(ctxt, ctxt->src.val);
+ if (rc != X86EMUL_CONTINUE)
+ break;
ctxt->src.val = old_eip;
rc = em_push(ctxt);
break;
}
case 4: /* jmp abs */
- ctxt->_eip = ctxt->src.val;
+ rc = assign_eip_near(ctxt, ctxt->src.val);
break;
case 5: /* jmp far */
rc = em_jmp_far(ctxt);
static int em_ret(struct x86_emulate_ctxt *ctxt)
{
- ctxt->dst.type = OP_REG;
- ctxt->dst.addr.reg = &ctxt->_eip;
- ctxt->dst.bytes = ctxt->op_bytes;
- return em_pop(ctxt);
+ int rc;
+ unsigned long eip;
+
+ rc = emulate_pop(ctxt, &eip, ctxt->op_bytes);
+ if (rc != X86EMUL_CONTINUE)
+ return rc;
+
+ return assign_eip_near(ctxt, eip);
}
static int em_ret_far(struct x86_emulate_ctxt *ctxt)
{
int rc;
- unsigned long cs;
+ unsigned long eip, cs;
+ u16 old_cs;
int cpl = ctxt->ops->cpl(ctxt);
+ struct desc_struct old_desc, new_desc;
+ const struct x86_emulate_ops *ops = ctxt->ops;
- rc = emulate_pop(ctxt, &ctxt->_eip, ctxt->op_bytes);
+ if (ctxt->mode == X86EMUL_MODE_PROT64)
+ ops->get_segment(ctxt, &old_cs, &old_desc, NULL,
+ VCPU_SREG_CS);
+
+ rc = emulate_pop(ctxt, &eip, ctxt->op_bytes);
if (rc != X86EMUL_CONTINUE)
return rc;
- if (ctxt->op_bytes == 4)
- ctxt->_eip = (u32)ctxt->_eip;
rc = emulate_pop(ctxt, &cs, ctxt->op_bytes);
if (rc != X86EMUL_CONTINUE)
return rc;
/* Outer-privilege level return is not implemented */
if (ctxt->mode >= X86EMUL_MODE_PROT16 && (cs & 3) > cpl)
return X86EMUL_UNHANDLEABLE;
- rc = load_segment_descriptor(ctxt, (u16)cs, VCPU_SREG_CS);
+ rc = __load_segment_descriptor(ctxt, (u16)cs, VCPU_SREG_CS, 0, false,
+ &new_desc);
+ if (rc != X86EMUL_CONTINUE)
+ return rc;
+ rc = assign_eip_far(ctxt, eip, new_desc.l);
+ if (rc != X86EMUL_CONTINUE) {
+ WARN_ON(ctxt->mode != X86EMUL_MODE_PROT64);
+ ops->set_segment(ctxt, old_cs, &old_desc, 0, VCPU_SREG_CS);
+ }
return rc;
}
{
const struct x86_emulate_ops *ops = ctxt->ops;
struct desc_struct cs, ss;
- u64 msr_data;
+ u64 msr_data, rcx, rdx;
int usermode;
u16 cs_sel = 0, ss_sel = 0;
else
usermode = X86EMUL_MODE_PROT32;
+ rcx = reg_read(ctxt, VCPU_REGS_RCX);
+ rdx = reg_read(ctxt, VCPU_REGS_RDX);
+
cs.dpl = 3;
ss.dpl = 3;
ops->get_msr(ctxt, MSR_IA32_SYSENTER_CS, &msr_data);
ss_sel = cs_sel + 8;
cs.d = 0;
cs.l = 1;
+ if (is_noncanonical_address(rcx) ||
+ is_noncanonical_address(rdx))
+ return emulate_gp(ctxt, 0);
break;
}
cs_sel |= SELECTOR_RPL_MASK;
ops->set_segment(ctxt, cs_sel, &cs, 0, VCPU_SREG_CS);
ops->set_segment(ctxt, ss_sel, &ss, 0, VCPU_SREG_SS);
- ctxt->_eip = reg_read(ctxt, VCPU_REGS_RDX);
- *reg_write(ctxt, VCPU_REGS_RSP) = reg_read(ctxt, VCPU_REGS_RCX);
+ ctxt->_eip = rdx;
+ *reg_write(ctxt, VCPU_REGS_RSP) = rcx;
return X86EMUL_CONTINUE;
}
* Now load segment descriptors. If fault happens at this stage
* it is handled in a context of new task
*/
- ret = __load_segment_descriptor(ctxt, tss->ldt, VCPU_SREG_LDTR, cpl, true);
+ ret = __load_segment_descriptor(ctxt, tss->ldt, VCPU_SREG_LDTR, cpl,
+ true, NULL);
if (ret != X86EMUL_CONTINUE)
return ret;
- ret = __load_segment_descriptor(ctxt, tss->es, VCPU_SREG_ES, cpl, true);
+ ret = __load_segment_descriptor(ctxt, tss->es, VCPU_SREG_ES, cpl,
+ true, NULL);
if (ret != X86EMUL_CONTINUE)
return ret;
- ret = __load_segment_descriptor(ctxt, tss->cs, VCPU_SREG_CS, cpl, true);
+ ret = __load_segment_descriptor(ctxt, tss->cs, VCPU_SREG_CS, cpl,
+ true, NULL);
if (ret != X86EMUL_CONTINUE)
return ret;
- ret = __load_segment_descriptor(ctxt, tss->ss, VCPU_SREG_SS, cpl, true);
+ ret = __load_segment_descriptor(ctxt, tss->ss, VCPU_SREG_SS, cpl,
+ true, NULL);
if (ret != X86EMUL_CONTINUE)
return ret;
- ret = __load_segment_descriptor(ctxt, tss->ds, VCPU_SREG_DS, cpl, true);
+ ret = __load_segment_descriptor(ctxt, tss->ds, VCPU_SREG_DS, cpl,
+ true, NULL);
if (ret != X86EMUL_CONTINUE)
return ret;
* Now load segment descriptors. If fault happenes at this stage
* it is handled in a context of new task
*/
- ret = __load_segment_descriptor(ctxt, tss->ldt_selector, VCPU_SREG_LDTR, cpl, true);
+ ret = __load_segment_descriptor(ctxt, tss->ldt_selector, VCPU_SREG_LDTR,
+ cpl, true, NULL);
if (ret != X86EMUL_CONTINUE)
return ret;
- ret = __load_segment_descriptor(ctxt, tss->es, VCPU_SREG_ES, cpl, true);
+ ret = __load_segment_descriptor(ctxt, tss->es, VCPU_SREG_ES, cpl,
+ true, NULL);
if (ret != X86EMUL_CONTINUE)
return ret;
- ret = __load_segment_descriptor(ctxt, tss->cs, VCPU_SREG_CS, cpl, true);
+ ret = __load_segment_descriptor(ctxt, tss->cs, VCPU_SREG_CS, cpl,
+ true, NULL);
if (ret != X86EMUL_CONTINUE)
return ret;
- ret = __load_segment_descriptor(ctxt, tss->ss, VCPU_SREG_SS, cpl, true);
+ ret = __load_segment_descriptor(ctxt, tss->ss, VCPU_SREG_SS, cpl,
+ true, NULL);
if (ret != X86EMUL_CONTINUE)
return ret;
- ret = __load_segment_descriptor(ctxt, tss->ds, VCPU_SREG_DS, cpl, true);
+ ret = __load_segment_descriptor(ctxt, tss->ds, VCPU_SREG_DS, cpl,
+ true, NULL);
if (ret != X86EMUL_CONTINUE)
return ret;
- ret = __load_segment_descriptor(ctxt, tss->fs, VCPU_SREG_FS, cpl, true);
+ ret = __load_segment_descriptor(ctxt, tss->fs, VCPU_SREG_FS, cpl,
+ true, NULL);
if (ret != X86EMUL_CONTINUE)
return ret;
- ret = __load_segment_descriptor(ctxt, tss->gs, VCPU_SREG_GS, cpl, true);
+ ret = __load_segment_descriptor(ctxt, tss->gs, VCPU_SREG_GS, cpl,
+ true, NULL);
if (ret != X86EMUL_CONTINUE)
return ret;
static int em_call(struct x86_emulate_ctxt *ctxt)
{
+ int rc;
long rel = ctxt->src.val;
ctxt->src.val = (unsigned long)ctxt->_eip;
- jmp_rel(ctxt, rel);
+ rc = jmp_rel(ctxt, rel);
+ if (rc != X86EMUL_CONTINUE)
+ return rc;
return em_push(ctxt);
}
u16 sel, old_cs;
ulong old_eip;
int rc;
+ struct desc_struct old_desc, new_desc;
+ const struct x86_emulate_ops *ops = ctxt->ops;
+ int cpl = ctxt->ops->cpl(ctxt);
- old_cs = get_segment_selector(ctxt, VCPU_SREG_CS);
old_eip = ctxt->_eip;
+ ops->get_segment(ctxt, &old_cs, &old_desc, NULL, VCPU_SREG_CS);
memcpy(&sel, ctxt->src.valptr + ctxt->op_bytes, 2);
- if (load_segment_descriptor(ctxt, sel, VCPU_SREG_CS))
+ rc = __load_segment_descriptor(ctxt, sel, VCPU_SREG_CS, cpl, false,
+ &new_desc);
+ if (rc != X86EMUL_CONTINUE)
return X86EMUL_CONTINUE;
- ctxt->_eip = 0;
- memcpy(&ctxt->_eip, ctxt->src.valptr, ctxt->op_bytes);
+ rc = assign_eip_far(ctxt, ctxt->src.val, new_desc.l);
+ if (rc != X86EMUL_CONTINUE)
+ goto fail;
ctxt->src.val = old_cs;
rc = em_push(ctxt);
if (rc != X86EMUL_CONTINUE)
- return rc;
+ goto fail;
ctxt->src.val = old_eip;
- return em_push(ctxt);
+ rc = em_push(ctxt);
+ /* If we failed, we tainted the memory, but the very least we should
+ restore cs */
+ if (rc != X86EMUL_CONTINUE)
+ goto fail;
+ return rc;
+fail:
+ ops->set_segment(ctxt, old_cs, &old_desc, 0, VCPU_SREG_CS);
+ return rc;
+
}
static int em_ret_near_imm(struct x86_emulate_ctxt *ctxt)
{
int rc;
+ unsigned long eip;
- ctxt->dst.type = OP_REG;
- ctxt->dst.addr.reg = &ctxt->_eip;
- ctxt->dst.bytes = ctxt->op_bytes;
- rc = emulate_pop(ctxt, &ctxt->dst.val, ctxt->op_bytes);
+ rc = emulate_pop(ctxt, &eip, ctxt->op_bytes);
+ if (rc != X86EMUL_CONTINUE)
+ return rc;
+ rc = assign_eip_near(ctxt, eip);
if (rc != X86EMUL_CONTINUE)
return rc;
rsp_increment(ctxt, ctxt->src.val);
static int em_loop(struct x86_emulate_ctxt *ctxt)
{
+ int rc = X86EMUL_CONTINUE;
+
register_address_increment(ctxt, reg_rmw(ctxt, VCPU_REGS_RCX), -1);
if ((address_mask(ctxt, reg_read(ctxt, VCPU_REGS_RCX)) != 0) &&
(ctxt->b == 0xe2 || test_cc(ctxt->b ^ 0x5, ctxt->eflags)))
- jmp_rel(ctxt, ctxt->src.val);
+ rc = jmp_rel(ctxt, ctxt->src.val);
- return X86EMUL_CONTINUE;
+ return rc;
}
static int em_jcxz(struct x86_emulate_ctxt *ctxt)
{
+ int rc = X86EMUL_CONTINUE;
+
if (address_mask(ctxt, reg_read(ctxt, VCPU_REGS_RCX)) == 0)
- jmp_rel(ctxt, ctxt->src.val);
+ rc = jmp_rel(ctxt, ctxt->src.val);
- return X86EMUL_CONTINUE;
+ return rc;
}
static int em_in(struct x86_emulate_ctxt *ctxt)
return X86EMUL_CONTINUE;
}
+static int em_clflush(struct x86_emulate_ctxt *ctxt)
+{
+ /* emulating clflush regardless of cpuid */
+ return X86EMUL_CONTINUE;
+}
+
static bool valid_cr(int nr)
{
switch (nr) {
X7(D(Undefined)),
};
+static const struct gprefix pfx_0f_ae_7 = {
+ I(SrcMem | ByteOp, em_clflush), N, N, N,
+};
+
+static const struct group_dual group15 = { {
+ N, N, N, N, N, N, N, GP(0, &pfx_0f_ae_7),
+}, {
+ N, N, N, N, N, N, N, N,
+} };
+
static const struct gprefix pfx_0f_6f_0f_7f = {
I(Mmx, em_mov), I(Sse | Aligned, em_mov), N, I(Sse | Unaligned, em_mov),
};
N, I(ImplicitOps | EmulateOnUD, em_syscall),
II(ImplicitOps | Priv, em_clts, clts), N,
DI(ImplicitOps | Priv, invd), DI(ImplicitOps | Priv, wbinvd), N, N,
- N, D(ImplicitOps | ModRM), N, N,
+ N, D(ImplicitOps | ModRM | SrcMem | NoAccess), N, N,
/* 0x10 - 0x1F */
N, N, N, N, N, N, N, N,
- D(ImplicitOps | ModRM), N, N, N, N, N, N, D(ImplicitOps | ModRM),
+ D(ImplicitOps | ModRM | SrcMem | NoAccess),
+ N, N, N, N, N, N, D(ImplicitOps | ModRM | SrcMem | NoAccess),
/* 0x20 - 0x2F */
DIP(ModRM | DstMem | Priv | Op3264 | NoMod, cr_read, check_cr_read),
DIP(ModRM | DstMem | Priv | Op3264 | NoMod, dr_read, check_dr_read),
F(DstMem | SrcReg | ModRM | BitOp | Lock | PageTable, em_bts),
F(DstMem | SrcReg | Src2ImmByte | ModRM, em_shrd),
F(DstMem | SrcReg | Src2CL | ModRM, em_shrd),
- D(ModRM), F(DstReg | SrcMem | ModRM, em_imul),
+ GD(0, &group15), F(DstReg | SrcMem | ModRM, em_imul),
/* 0xB0 - 0xB7 */
I2bv(DstMem | SrcReg | ModRM | Lock | PageTable, em_cmpxchg),
I(DstReg | SrcMemFAddr | ModRM | Src2SS, em_lseg),
fetch_register_operand(op);
break;
case OpCL:
+ op->type = OP_IMM;
op->bytes = 1;
op->val = reg_read(ctxt, VCPU_REGS_RCX) & 0xff;
break;
rc = decode_imm(ctxt, op, 1, true);
break;
case OpOne:
+ op->type = OP_IMM;
op->bytes = 1;
op->val = 1;
break;
ctxt->memop.bytes = ctxt->op_bytes + 2;
goto mem_common;
case OpES:
+ op->type = OP_IMM;
op->val = VCPU_SREG_ES;
break;
case OpCS:
+ op->type = OP_IMM;
op->val = VCPU_SREG_CS;
break;
case OpSS:
+ op->type = OP_IMM;
op->val = VCPU_SREG_SS;
break;
case OpDS:
+ op->type = OP_IMM;
op->val = VCPU_SREG_DS;
break;
case OpFS:
+ op->type = OP_IMM;
op->val = VCPU_SREG_FS;
break;
case OpGS:
+ op->type = OP_IMM;
op->val = VCPU_SREG_GS;
break;
case OpImplicit:
/* Decode and fetch the destination operand: register or memory. */
rc = decode_operand(ctxt, &ctxt->dst, (ctxt->d >> DstShift) & OpMask);
-done:
if (ctxt->rip_relative)
ctxt->memopp->addr.mem.ea += ctxt->_eip;
+done:
return (rc != X86EMUL_CONTINUE) ? EMULATION_FAILED : EMULATION_OK;
}
break;
case 0x70 ... 0x7f: /* jcc (short) */
if (test_cc(ctxt->b, ctxt->eflags))
- jmp_rel(ctxt, ctxt->src.val);
+ rc = jmp_rel(ctxt, ctxt->src.val);
break;
case 0x8d: /* lea r16/r32, m */
ctxt->dst.val = ctxt->src.addr.mem.ea;
break;
case 0xe9: /* jmp rel */
case 0xeb: /* jmp rel short */
- jmp_rel(ctxt, ctxt->src.val);
+ rc = jmp_rel(ctxt, ctxt->src.val);
ctxt->dst.type = OP_NONE; /* Disable writeback. */
break;
case 0xf4: /* hlt */
break;
case 0x80 ... 0x8f: /* jnz rel, etc*/
if (test_cc(ctxt->b, ctxt->eflags))
- jmp_rel(ctxt, ctxt->src.val);
+ rc = jmp_rel(ctxt, ctxt->src.val);
break;
case 0x90 ... 0x9f: /* setcc r/m8 */
ctxt->dst.val = test_cc(ctxt->b, ctxt->eflags);
break;
- case 0xae: /* clflush */
- break;
case 0xb6 ... 0xb7: /* movzx */
ctxt->dst.bytes = ctxt->op_bytes;
ctxt->dst.val = (ctxt->src.bytes == 1) ? (u8) ctxt->src.val
return;
timer = &pit->pit_state.timer;
+ mutex_lock(&pit->pit_state.lock);
if (hrtimer_cancel(timer))
hrtimer_start_expires(timer, HRTIMER_MODE_ABS);
+ mutex_unlock(&pit->pit_state.lock);
}
static void destroy_pit_timer(struct kvm_pit *pit)
* kvm mmu, before reclaiming the page, we should
* unmap it from mmu first.
*/
- WARN_ON(!kvm_is_mmio_pfn(pfn) && !page_count(pfn_to_page(pfn)));
+ WARN_ON(!kvm_is_reserved_pfn(pfn) && !page_count(pfn_to_page(pfn)));
if (!shadow_accessed_mask || old_spte & shadow_accessed_mask)
kvm_set_pfn_accessed(pfn);
spte |= PT_PAGE_SIZE_MASK;
if (tdp_enabled)
spte |= kvm_x86_ops->get_mt_mask(vcpu, gfn,
- kvm_is_mmio_pfn(pfn));
+ kvm_is_reserved_pfn(pfn));
if (host_writable)
spte |= SPTE_HOST_WRITEABLE;
* PT_PAGE_TABLE_LEVEL and there would be no adjustment done
* here.
*/
- if (!is_error_noslot_pfn(pfn) && !kvm_is_mmio_pfn(pfn) &&
+ if (!is_error_noslot_pfn(pfn) && !kvm_is_reserved_pfn(pfn) &&
level == PT_PAGE_TABLE_LEVEL &&
PageTransCompound(pfn_to_page(pfn)) &&
!has_wrprotected_page(vcpu->kvm, gfn, PT_DIRECTORY_LEVEL)) {
}
#endif
walker->max_level = walker->level;
- ASSERT(!is_long_mode(vcpu) && is_pae(vcpu));
+ ASSERT(!(is_long_mode(vcpu) && !is_pae(vcpu)));
accessed_dirty = PT_GUEST_ACCESSED_MASK;
pt_access = pte_access = ACC_ALL;
msr.host_initiated = false;
svm->next_rip = kvm_rip_read(&svm->vcpu) + 2;
- if (svm_set_msr(&svm->vcpu, &msr)) {
+ if (kvm_set_msr(&svm->vcpu, &msr)) {
trace_kvm_msr_write_ex(ecx, data);
kvm_inject_gp(&svm->vcpu, 0);
} else {
if (exit_code >= ARRAY_SIZE(svm_exit_handlers)
|| !svm_exit_handlers[exit_code]) {
- kvm_run->exit_reason = KVM_EXIT_UNKNOWN;
- kvm_run->hw.hardware_exit_reason = exit_code;
- return 0;
+ WARN_ONCE(1, "vmx: unexpected exit reason 0x%x\n", exit_code);
+ kvm_queue_exception(vcpu, UD_VECTOR);
+ return 1;
}
return svm_exit_handlers[exit_code](svm);
default:
msr = find_msr_entry(vmx, msr_index);
if (msr) {
+ u64 old_msr_data = msr->data;
msr->data = data;
if (msr - vmx->guest_msrs < vmx->save_nmsrs) {
preempt_disable();
- kvm_set_shared_msr(msr->index, msr->data,
- msr->mask);
+ ret = kvm_set_shared_msr(msr->index, msr->data,
+ msr->mask);
preempt_enable();
+ if (ret)
+ msr->data = old_msr_data;
}
break;
}
vmcs_write32(TPR_THRESHOLD, 0);
}
- kvm_vcpu_reload_apic_access_page(vcpu);
+ kvm_make_request(KVM_REQ_APIC_PAGE_RELOAD, vcpu);
if (vmx_vm_has_apicv(vcpu->kvm))
memset(&vmx->pi_desc, 0, sizeof(struct pi_desc));
msr.data = data;
msr.index = ecx;
msr.host_initiated = false;
- if (vmx_set_msr(vcpu, &msr) != 0) {
+ if (kvm_set_msr(vcpu, &msr) != 0) {
trace_kvm_msr_write_ex(ecx, data);
kvm_inject_gp(vcpu, 0);
return 1;
const unsigned long *fields = shadow_read_write_fields;
const int num_fields = max_shadow_read_write_fields;
+ preempt_disable();
+
vmcs_load(shadow_vmcs);
for (i = 0; i < num_fields; i++) {
vmcs_clear(shadow_vmcs);
vmcs_load(vmx->loaded_vmcs->vmcs);
+
+ preempt_enable();
}
static void copy_vmcs12_to_shadow(struct vcpu_vmx *vmx)
return 1;
}
+static int handle_invvpid(struct kvm_vcpu *vcpu)
+{
+ kvm_queue_exception(vcpu, UD_VECTOR);
+ return 1;
+}
+
/*
* The exit handlers return 1 if the exit was handled fully and guest execution
* may resume. Otherwise they set the kvm_run parameter to indicate what needs
[EXIT_REASON_MWAIT_INSTRUCTION] = handle_mwait,
[EXIT_REASON_MONITOR_INSTRUCTION] = handle_monitor,
[EXIT_REASON_INVEPT] = handle_invept,
+ [EXIT_REASON_INVVPID] = handle_invvpid,
};
static const int kvm_vmx_max_exit_handlers =
case EXIT_REASON_VMPTRST: case EXIT_REASON_VMREAD:
case EXIT_REASON_VMRESUME: case EXIT_REASON_VMWRITE:
case EXIT_REASON_VMOFF: case EXIT_REASON_VMON:
- case EXIT_REASON_INVEPT:
+ case EXIT_REASON_INVEPT: case EXIT_REASON_INVVPID:
/*
* VMX instructions trap unconditionally. This allows L1 to
* emulate them for its L2 guest, i.e., allows 3-level nesting!
&& kvm_vmx_exit_handlers[exit_reason])
return kvm_vmx_exit_handlers[exit_reason](vcpu);
else {
- vcpu->run->exit_reason = KVM_EXIT_UNKNOWN;
- vcpu->run->hw.hardware_exit_reason = exit_reason;
+ WARN_ONCE(1, "vmx: unexpected exit reason 0x%x\n", exit_reason);
+ kvm_queue_exception(vcpu, UD_VECTOR);
+ return 1;
}
- return 0;
}
static void update_cr8_intercept(struct kvm_vcpu *vcpu, int tpr, int irr)
shared_msr_update(i, shared_msrs_global.msrs[i]);
}
-void kvm_set_shared_msr(unsigned slot, u64 value, u64 mask)
+int kvm_set_shared_msr(unsigned slot, u64 value, u64 mask)
{
unsigned int cpu = smp_processor_id();
struct kvm_shared_msrs *smsr = per_cpu_ptr(shared_msrs, cpu);
+ int err;
if (((value ^ smsr->values[slot].curr) & mask) == 0)
- return;
+ return 0;
smsr->values[slot].curr = value;
- wrmsrl(shared_msrs_global.msrs[slot], value);
+ err = wrmsrl_safe(shared_msrs_global.msrs[slot], value);
+ if (err)
+ return 1;
+
if (!smsr->registered) {
smsr->urn.on_user_return = kvm_on_user_return;
user_return_notifier_register(&smsr->urn);
smsr->registered = true;
}
+ return 0;
}
EXPORT_SYMBOL_GPL(kvm_set_shared_msr);
}
EXPORT_SYMBOL_GPL(kvm_enable_efer_bits);
-
/*
* Writes msr value into into the appropriate "register".
* Returns 0 on success, non-0 otherwise.
*/
int kvm_set_msr(struct kvm_vcpu *vcpu, struct msr_data *msr)
{
+ switch (msr->index) {
+ case MSR_FS_BASE:
+ case MSR_GS_BASE:
+ case MSR_KERNEL_GS_BASE:
+ case MSR_CSTAR:
+ case MSR_LSTAR:
+ if (is_noncanonical_address(msr->data))
+ return 1;
+ break;
+ case MSR_IA32_SYSENTER_EIP:
+ case MSR_IA32_SYSENTER_ESP:
+ /*
+ * IA32_SYSENTER_ESP and IA32_SYSENTER_EIP cause #GP if
+ * non-canonical address is written on Intel but not on
+ * AMD (which ignores the top 32-bits, because it does
+ * not implement 64-bit SYSENTER).
+ *
+ * 64-bit code should hence be able to write a non-canonical
+ * value on AMD. Making the address canonical ensures that
+ * vmentry does not fail on Intel after writing a non-canonical
+ * value, and that something deterministic happens if the guest
+ * invokes 64-bit SYSENTER.
+ */
+ msr->data = get_canonical(msr->data);
+ }
return kvm_x86_ops->set_msr(vcpu, msr);
}
+EXPORT_SYMBOL_GPL(kvm_set_msr);
/*
* Adapt set_msr() to msr_io()'s calling convention
while (((unsigned long)src & 6) && len >= 2) {
__u16 val16;
- *errp = __get_user(val16, (const __u16 __user *)src);
- if (*errp)
- return isum;
+ if (__get_user(val16, (const __u16 __user *)src))
+ goto out_err;
*(__u16 *)dst = val16;
isum = (__force __wsum)add32_with_carry(
unsigned long end = (unsigned long) &__end_rodata_hpage_align;
unsigned long text_end = PFN_ALIGN(&__stop___ex_table);
unsigned long rodata_end = PFN_ALIGN(&__end_rodata);
- unsigned long all_end = PFN_ALIGN(&_end);
+ unsigned long all_end;
printk(KERN_INFO "Write protecting the kernel read-only data: %luk\n",
(end - start) >> 10);
/*
* The rodata/data/bss/brk section (but not the kernel text!)
* should also be not-executable.
+ *
+ * We align all_end to PMD_SIZE because the existing mapping
+ * is a full PMD. If we would align _brk_end to PAGE_SIZE we
+ * split the PMD and the reminder between _brk_end and the end
+ * of the PMD will remain mapped executable.
+ *
+ * Any PMD which was setup after the one which covers _brk_end
+ * has been zapped already via cleanup_highmem().
*/
+ all_end = roundup((unsigned long)_brk_end, PMD_SIZE);
set_memory_nx(rodata_start, (all_end - rodata_start) >> PAGE_SHIFT);
rodata_test();
* Convert a physical pointer to a virtual kernel pointer for /dev/mem
* access
*/
-void *xlate_dev_mem_ptr(unsigned long phys)
+void *xlate_dev_mem_ptr(phys_addr_t phys)
{
void *addr;
unsigned long start = phys & PAGE_MASK;
return addr;
}
-void unxlate_dev_mem_ptr(unsigned long phys, void *addr)
+void unxlate_dev_mem_ptr(phys_addr_t phys, void *addr)
{
if (page_is_ram(phys >> PAGE_SHIFT))
return;
psize = page_level_size(level);
pmask = page_level_mask(level);
offset = virt_addr & ~pmask;
- phys_addr = pte_pfn(*pte) << PAGE_SHIFT;
+ phys_addr = (phys_addr_t)pte_pfn(*pte) << PAGE_SHIFT;
return (phys_addr | offset);
}
EXPORT_SYMBOL_GPL(slow_virt_to_phys);
if (ACPI_FAILURE(status))
return;
- if (bgrt_tab->header.length < sizeof(*bgrt_tab))
+ if (bgrt_tab->header.length < sizeof(*bgrt_tab)) {
+ pr_err("Ignoring BGRT: invalid length %u (expected %zu)\n",
+ bgrt_tab->header.length, sizeof(*bgrt_tab));
return;
- if (bgrt_tab->version != 1 || bgrt_tab->status != 1)
+ }
+ if (bgrt_tab->version != 1) {
+ pr_err("Ignoring BGRT: invalid version %u (expected 1)\n",
+ bgrt_tab->version);
+ return;
+ }
+ if (bgrt_tab->status != 1) {
+ pr_err("Ignoring BGRT: invalid status %u (expected 1)\n",
+ bgrt_tab->status);
+ return;
+ }
+ if (bgrt_tab->image_type != 0) {
+ pr_err("Ignoring BGRT: invalid image type %u (expected 0)\n",
+ bgrt_tab->image_type);
return;
- if (bgrt_tab->image_type != 0 || !bgrt_tab->image_address)
+ }
+ if (!bgrt_tab->image_address) {
+ pr_err("Ignoring BGRT: null image address\n");
return;
+ }
image = efi_lookup_mapped_addr(bgrt_tab->image_address);
if (!image) {
image = early_memremap(bgrt_tab->image_address,
sizeof(bmp_header));
ioremapped = true;
- if (!image)
+ if (!image) {
+ pr_err("Ignoring BGRT: failed to map image header memory\n");
return;
+ }
}
memcpy_fromio(&bmp_header, image, sizeof(bmp_header));
early_iounmap(image, sizeof(bmp_header));
bgrt_image_size = bmp_header.size;
- bgrt_image = kmalloc(bgrt_image_size, GFP_KERNEL);
- if (!bgrt_image)
+ bgrt_image = kmalloc(bgrt_image_size, GFP_KERNEL | __GFP_NOWARN);
+ if (!bgrt_image) {
+ pr_err("Ignoring BGRT: failed to allocate memory for image (wanted %zu bytes)\n",
+ bgrt_image_size);
return;
+ }
if (ioremapped) {
image = early_memremap(bgrt_tab->image_address,
bmp_header.size);
if (!image) {
+ pr_err("Ignoring BGRT: failed to map image memory\n");
kfree(bgrt_image);
bgrt_image = NULL;
return;
u64 efi_setup; /* efi setup_data physical address */
-static bool disable_runtime __initdata = false;
-static int __init setup_noefi(char *arg)
-{
- disable_runtime = true;
- return 0;
-}
-early_param("noefi", setup_noefi);
-
-int add_efi_memmap;
-EXPORT_SYMBOL(add_efi_memmap);
-
+static int add_efi_memmap __initdata;
static int __init setup_add_efi_memmap(char *arg)
{
add_efi_memmap = 1;
{
efi_status_t status;
- efi_call_phys_prelog();
+ efi_call_phys_prolog();
status = efi_call_phys(efi_phys.set_virtual_address_map,
memory_map_size, descriptor_size,
descriptor_version, virtual_map);
for (p = memmap.map, i = 0;
p < memmap.map_end;
p += memmap.desc_size, i++) {
+ char buf[64];
+
md = p;
- pr_info("mem%02u: type=%u, attr=0x%llx, range=[0x%016llx-0x%016llx) (%lluMB)\n",
- i, md->type, md->attribute, md->phys_addr,
+ pr_info("mem%02u: %s range=[0x%016llx-0x%016llx) (%lluMB)\n",
+ i, efi_md_typeattr_format(buf, sizeof(buf), md),
+ md->phys_addr,
md->phys_addr + (md->num_pages << EFI_PAGE_SHIFT),
(md->num_pages >> (20 - EFI_PAGE_SHIFT)));
}
}
/*
- * We will only need *early* access to the following two
- * EFI runtime services before set_virtual_address_map
- * is invoked.
+ * We will only need *early* access to the SetVirtualAddressMap
+ * EFI runtime service. All other runtime services will be called
+ * via the virtual mapping.
*/
efi_phys.set_virtual_address_map =
(efi_set_virtual_address_map_t *)
}
/*
- * We will only need *early* access to the following two
- * EFI runtime services before set_virtual_address_map
- * is invoked.
+ * We will only need *early* access to the SetVirtualAddressMap
+ * EFI runtime service. All other runtime services will be called
+ * via the virtual mapping.
*/
efi_phys.set_virtual_address_map =
(efi_set_virtual_address_map_t *)
if (!efi_runtime_supported())
pr_info("No EFI runtime due to 32/64-bit mismatch with kernel\n");
else {
- if (disable_runtime || efi_runtime_init())
+ if (efi_runtime_disabled() || efi_runtime_init())
return;
}
if (efi_memmap_init())
}
}
-void efi_memory_uc(u64 addr, unsigned long size)
+void __init efi_memory_uc(u64 addr, unsigned long size)
{
unsigned long page_shift = 1UL << EFI_PAGE_SHIFT;
u64 npages;
*/
if (!efi_is_native()) {
efi_unmap_memmap();
+ clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
return;
}
new_memmap = efi_map_regions(&count, &pg_shift);
if (!new_memmap) {
pr_err("Error reallocating memory, EFI runtime non-functional!\n");
+ clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
return;
}
BUG_ON(!efi.systab);
- if (efi_setup_page_tables(__pa(new_memmap), 1 << pg_shift))
+ if (efi_setup_page_tables(__pa(new_memmap), 1 << pg_shift)) {
+ clear_bit(EFI_RUNTIME_SERVICES, &efi.flags);
return;
+ }
efi_sync_low_kernel_mappings();
efi_dump_pagetable();
return 0;
}
-static int __init parse_efi_cmdline(char *str)
+static int __init arch_parse_efi_cmdline(char *str)
{
- if (*str == '=')
- str++;
-
- if (!strncmp(str, "old_map", 7))
+ if (parse_option_str(str, "old_map"))
set_bit(EFI_OLD_MEMMAP, &efi.flags);
return 0;
}
-early_param("efi", parse_efi_cmdline);
+early_param("efi", arch_parse_efi_cmdline);
/*
* To make EFI call EFI runtime service in physical addressing mode we need
- * prelog/epilog before/after the invocation to disable interrupt, to
+ * prolog/epilog before/after the invocation to disable interrupt, to
* claim EFI runtime service handler exclusively and to duplicate a memory in
* low memory space say 0 - 3G.
*/
void efi_sync_low_kernel_mappings(void) {}
void __init efi_dump_pagetable(void) {}
-int efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
+int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
{
return 0;
}
-void efi_cleanup_page_tables(unsigned long pa_memmap, unsigned num_pages) {}
+void __init efi_cleanup_page_tables(unsigned long pa_memmap, unsigned num_pages)
+{
+}
void __init efi_map_region(efi_memory_desc_t *md)
{
void __init efi_map_region_fixed(efi_memory_desc_t *md) {}
void __init parse_efi_setup(u64 phys_addr, u32 data_len) {}
-void efi_call_phys_prelog(void)
+void __init efi_call_phys_prolog(void)
{
struct desc_ptr gdt_descr;
load_gdt(&gdt_descr);
}
-void efi_call_phys_epilog(void)
+void __init efi_call_phys_epilog(void)
{
struct desc_ptr gdt_descr;
}
}
-void __init efi_call_phys_prelog(void)
+void __init efi_call_phys_prolog(void)
{
unsigned long vaddress;
int pgd;
sizeof(pgd_t) * num_pgds);
}
-int efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
+int __init efi_setup_page_tables(unsigned long pa_memmap, unsigned num_pages)
{
unsigned long text;
struct page *page;
return 0;
}
-void efi_cleanup_page_tables(unsigned long pa_memmap, unsigned num_pages)
+void __init efi_cleanup_page_tables(unsigned long pa_memmap, unsigned num_pages)
{
pgd_t *pgd = (pgd_t *)__va(real_mode_header->trampoline_pgd);
* set to 0x0010, DS and SS have been set to 0x0018. In EFI, I found
* the values of these registers are the same. And, the corresponding
* GDT entries are identical. So I will do nothing about segment reg
- * and GDT, but change GDT base register in prelog and epilog.
+ * and GDT, but change GDT base register in prolog and epilog.
*/
/*
* 1. Now I am running with EIP = <physical address> + PAGE_OFFSET.
* But to make it smoothly switch from virtual mode to flat mode.
- * The mapping of lower virtual memory has been created in prelog and
+ * The mapping of lower virtual memory has been created in prolog and
* epilog.
*/
movl $1f, %edx
*/
-/* __attribute__((weak)) makes these declarations overridable */
/* For every CPU addition a new get_<cpuname>_ops interface needs
* to be added.
*/
-extern void *get_penwell_ops(void) __attribute__((weak));
-extern void *get_cloverview_ops(void) __attribute__((weak));
-extern void *get_tangier_ops(void) __attribute__((weak));
+extern void *get_penwell_ops(void);
+extern void *get_cloverview_ops(void);
+extern void *get_tangier_ops(void);
mp_irq.dstapic = MP_APIC_ALL;
mp_irq.dstirq = pentry->irq;
mp_save_irq(&mp_irq);
+ mp_map_gsi_to_irq(pentry->irq, IOAPIC_MAP_ALLOC);
}
return 0;
mp_irq.dstapic = MP_APIC_ALL;
mp_irq.dstirq = pentry->irq;
mp_save_irq(&mp_irq);
+ mp_map_gsi_to_irq(pentry->irq, IOAPIC_MAP_ALLOC);
}
return 0;
}
--- /dev/null
+#!/usr/bin/perl
+#
+# Calculate the amount of space needed to run the kernel, including room for
+# the .bss and .brk sections.
+#
+# Usage:
+# objdump -h a.out | perl calc_run_size.pl
+use strict;
+
+my $mem_size = 0;
+my $file_offset = 0;
+
+my $sections=" *[0-9]+ \.(?:bss|brk) +";
+while (<>) {
+ if (/^$sections([0-9a-f]+) +(?:[0-9a-f]+ +){2}([0-9a-f]+)/) {
+ my $size = hex($1);
+ my $offset = hex($2);
+ $mem_size += $size;
+ if ($file_offset == 0) {
+ $file_offset = $offset;
+ } elsif ($file_offset != $offset) {
+ # BFD linker shows the same file offset in ELF.
+ # Gold linker shows them as consecutive.
+ next if ($file_offset + $mem_size == $offset + $size);
+
+ printf STDERR "file_offset: 0x%lx\n", $file_offset;
+ printf STDERR "mem_size: 0x%lx\n", $mem_size;
+ printf STDERR "offset: 0x%lx\n", $offset;
+ printf STDERR "size: 0x%lx\n", $size;
+
+ die ".bss and .brk are non-contiguous\n";
+ }
+ }
+}
+
+if ($file_offset == 0) {
+ die "Never found .bss or .brk file offset\n";
+}
+printf("%d\n", $mem_size + $file_offset);
xen_raw_console_write("mapping kernel into physical memory\n");
xen_setup_kernel_pagetable((pgd_t *)xen_start_info->pt_base, xen_start_info->nr_pages);
- /* Allocate and initialize top and mid mfn levels for p2m structure */
- xen_build_mfn_list_list();
-
/* keep using Xen gdt for now; no urgent need to change it */
#ifdef CONFIG_X86_32
static void __init xen_pagetable_init(void)
{
paging_init();
- xen_setup_shared_info();
#ifdef CONFIG_X86_64
xen_pagetable_p2m_copy();
#endif
+ /* Allocate and initialize top and mid mfn levels for p2m structure */
+ xen_build_mfn_list_list();
+
+ xen_setup_shared_info();
xen_post_allocator_init();
}
static void xen_write_cr2(unsigned long cr2)
#include <linux/hash.h>
#include <linux/sched.h>
#include <linux/seq_file.h>
+#include <linux/bootmem.h>
#include <asm/cache.h>
#include <asm/setup.h>
unsigned long xen_max_p2m_pfn __read_mostly;
+static unsigned long *p2m_mid_missing_mfn;
+static unsigned long *p2m_top_mfn;
+static unsigned long **p2m_top_mfn_p;
+
/* Placeholders for holes in the address space */
static RESERVE_BRK_ARRAY(unsigned long, p2m_missing, P2M_PER_PAGE);
static RESERVE_BRK_ARRAY(unsigned long *, p2m_mid_missing, P2M_MID_PER_PAGE);
-static RESERVE_BRK_ARRAY(unsigned long, p2m_mid_missing_mfn, P2M_MID_PER_PAGE);
static RESERVE_BRK_ARRAY(unsigned long **, p2m_top, P2M_TOP_PER_PAGE);
-static RESERVE_BRK_ARRAY(unsigned long, p2m_top_mfn, P2M_TOP_PER_PAGE);
-static RESERVE_BRK_ARRAY(unsigned long *, p2m_top_mfn_p, P2M_TOP_PER_PAGE);
static RESERVE_BRK_ARRAY(unsigned long, p2m_identity, P2M_PER_PAGE);
static RESERVE_BRK_ARRAY(unsigned long *, p2m_mid_identity, P2M_MID_PER_PAGE);
-static RESERVE_BRK_ARRAY(unsigned long, p2m_mid_identity_mfn, P2M_MID_PER_PAGE);
RESERVE_BRK(p2m_mid, PAGE_SIZE * (MAX_DOMAIN_PAGES / (P2M_PER_PAGE * P2M_MID_PER_PAGE)));
-RESERVE_BRK(p2m_mid_mfn, PAGE_SIZE * (MAX_DOMAIN_PAGES / (P2M_PER_PAGE * P2M_MID_PER_PAGE)));
/* For each I/O range remapped we may lose up to two leaf pages for the boundary
* violations and three mid pages to cover up to 3GB. With
* Build the parallel p2m_top_mfn and p2m_mid_mfn structures
*
* This is called both at boot time, and after resuming from suspend:
- * - At boot time we're called very early, and must use extend_brk()
+ * - At boot time we're called rather early, and must use alloc_bootmem*()
* to allocate memory.
*
* - After resume we're called from within stop_machine, but the mfn
- * tree should alreay be completely allocated.
+ * tree should already be completely allocated.
*/
void __ref xen_build_mfn_list_list(void)
{
/* Pre-initialize p2m_top_mfn to be completely missing */
if (p2m_top_mfn == NULL) {
- p2m_mid_missing_mfn = extend_brk(PAGE_SIZE, PAGE_SIZE);
+ p2m_mid_missing_mfn = alloc_bootmem_align(PAGE_SIZE, PAGE_SIZE);
p2m_mid_mfn_init(p2m_mid_missing_mfn, p2m_missing);
- p2m_mid_identity_mfn = extend_brk(PAGE_SIZE, PAGE_SIZE);
- p2m_mid_mfn_init(p2m_mid_identity_mfn, p2m_identity);
- p2m_top_mfn_p = extend_brk(PAGE_SIZE, PAGE_SIZE);
+ p2m_top_mfn_p = alloc_bootmem_align(PAGE_SIZE, PAGE_SIZE);
p2m_top_mfn_p_init(p2m_top_mfn_p);
- p2m_top_mfn = extend_brk(PAGE_SIZE, PAGE_SIZE);
+ p2m_top_mfn = alloc_bootmem_align(PAGE_SIZE, PAGE_SIZE);
p2m_top_mfn_init(p2m_top_mfn);
} else {
/* Reinitialise, mfn's all change after migration */
p2m_mid_mfn_init(p2m_mid_missing_mfn, p2m_missing);
- p2m_mid_mfn_init(p2m_mid_identity_mfn, p2m_identity);
}
for (pfn = 0; pfn < xen_max_p2m_pfn; pfn += P2M_PER_PAGE) {
/*
* XXX boot-time only! We should never find
* missing parts of the mfn tree after
- * runtime. extend_brk() will BUG if we call
- * it too late.
+ * runtime.
*/
- mid_mfn_p = extend_brk(PAGE_SIZE, PAGE_SIZE);
+ mid_mfn_p = alloc_bootmem_align(PAGE_SIZE, PAGE_SIZE);
p2m_mid_mfn_init(mid_mfn_p, p2m_missing);
p2m_top_mfn_p[topidx] = mid_mfn_p;
m2p_override_init();
}
#ifdef CONFIG_X86_64
-#include <linux/bootmem.h>
unsigned long __init xen_revector_p2m_tree(void)
{
unsigned long va_start;
copy_page(new, mid_p);
p2m_top[topidx][mididx] = &mfn_list[pfn_free];
- p2m_top_mfn_p[topidx][mididx] = virt_to_mfn(&mfn_list[pfn_free]);
pfn_free += P2M_PER_PAGE;
unsigned topidx, mididx;
unsigned long ***top_p, **mid;
unsigned long *top_mfn_p, *mid_mfn;
+ unsigned long *p2m_orig;
topidx = p2m_top_index(pfn);
mididx = p2m_mid_index(pfn);
top_p = &p2m_top[topidx];
- mid = *top_p;
+ mid = ACCESS_ONCE(*top_p);
if (mid == p2m_mid_missing) {
/* Mid level is missing, allocate a new one */
}
top_mfn_p = &p2m_top_mfn[topidx];
- mid_mfn = p2m_top_mfn_p[topidx];
+ mid_mfn = ACCESS_ONCE(p2m_top_mfn_p[topidx]);
BUG_ON(virt_to_mfn(mid_mfn) != *top_mfn_p);
/* Separately check the mid mfn level */
unsigned long missing_mfn;
unsigned long mid_mfn_mfn;
+ unsigned long old_mfn;
mid_mfn = alloc_p2m_page();
if (!mid_mfn)
missing_mfn = virt_to_mfn(p2m_mid_missing_mfn);
mid_mfn_mfn = virt_to_mfn(mid_mfn);
- if (cmpxchg(top_mfn_p, missing_mfn, mid_mfn_mfn) != missing_mfn)
+ old_mfn = cmpxchg(top_mfn_p, missing_mfn, mid_mfn_mfn);
+ if (old_mfn != missing_mfn) {
free_p2m_page(mid_mfn);
- else
+ mid_mfn = mfn_to_virt(old_mfn);
+ } else {
p2m_top_mfn_p[topidx] = mid_mfn;
+ }
}
- if (p2m_top[topidx][mididx] == p2m_identity ||
- p2m_top[topidx][mididx] == p2m_missing) {
+ p2m_orig = ACCESS_ONCE(p2m_top[topidx][mididx]);
+ if (p2m_orig == p2m_identity || p2m_orig == p2m_missing) {
/* p2m leaf page is missing */
unsigned long *p2m;
- unsigned long *p2m_orig = p2m_top[topidx][mididx];
p2m = alloc_p2m_page();
if (!p2m)
{
unsigned topidx, mididx, idx;
unsigned long *p2m;
- unsigned long *mid_mfn_p;
topidx = p2m_top_index(pfn);
mididx = p2m_mid_index(pfn);
p2m_top[topidx][mididx] = p2m;
- /* For save/restore we need to MFN of the P2M saved */
-
- mid_mfn_p = p2m_top_mfn_p[topidx];
- WARN(mid_mfn_p[mididx] != virt_to_mfn(p2m_missing),
- "P2M_TOP_P[%d][%d] != MFN of p2m_missing!\n",
- topidx, mididx);
- mid_mfn_p[mididx] = virt_to_mfn(p2m);
-
return true;
}
static bool __init early_alloc_p2m_middle(unsigned long pfn)
{
unsigned topidx = p2m_top_index(pfn);
- unsigned long *mid_mfn_p;
unsigned long **mid;
mid = p2m_top[topidx];
- mid_mfn_p = p2m_top_mfn_p[topidx];
if (mid == p2m_mid_missing) {
mid = extend_brk(PAGE_SIZE, PAGE_SIZE);
p2m_mid_init(mid, p2m_missing);
p2m_top[topidx] = mid;
-
- BUG_ON(mid_mfn_p != p2m_mid_missing_mfn);
- }
- /* And the save/restore P2M tables.. */
- if (mid_mfn_p == p2m_mid_missing_mfn) {
- mid_mfn_p = extend_brk(PAGE_SIZE, PAGE_SIZE);
- p2m_mid_mfn_init(mid_mfn_p, p2m_missing);
-
- p2m_top_mfn_p[topidx] = mid_mfn_p;
- p2m_top_mfn[topidx] = virt_to_mfn(mid_mfn_p);
- /* Note: we don't set mid_mfn_p[midix] here,
- * look in early_alloc_p2m() */
}
return true;
}
* replace the P2M leaf with a p2m_missing or p2m_identity.
* Stick the old page in the new P2M tree location.
*/
-bool __init early_can_reuse_p2m_middle(unsigned long set_pfn, unsigned long set_mfn)
+static bool __init early_can_reuse_p2m_middle(unsigned long set_pfn)
{
unsigned topidx;
unsigned mididx;
unsigned ident_pfns;
unsigned inv_pfns;
unsigned long *p2m;
- unsigned long *mid_mfn_p;
unsigned idx;
unsigned long pfn;
found:
/* Found one, replace old with p2m_identity or p2m_missing */
p2m_top[topidx][mididx] = (ident_pfns ? p2m_identity : p2m_missing);
- /* And the other for save/restore.. */
- mid_mfn_p = p2m_top_mfn_p[topidx];
- /* NOTE: Even if it is a p2m_identity it should still be point to
- * a page filled with INVALID_P2M_ENTRY entries. */
- mid_mfn_p[mididx] = virt_to_mfn(p2m_missing);
/* Reset where we want to stick the old page in. */
topidx = p2m_top_index(set_pfn);
p2m_init(p2m);
p2m_top[topidx][mididx] = p2m;
- mid_mfn_p = p2m_top_mfn_p[topidx];
- mid_mfn_p[mididx] = virt_to_mfn(p2m);
return true;
}
if (!early_alloc_p2m_middle(pfn))
return false;
- if (early_can_reuse_p2m_middle(pfn, mfn))
+ if (early_can_reuse_p2m_middle(pfn))
return __set_phys_to_machine(pfn, mfn);
if (!early_alloc_p2m(pfn, false /* boundary crossover OK!*/))
rc = 0;
}
BUG_ON(rc);
+ BUG_ON(memmap.nr_entries == 0);
/*
* Xen won't allow a 1:1 mapping to be created to UNUSABLE
current->state = TASK_UNINTERRUPTIBLE;
schedule_timeout(HZ/10);
}
+
+ cpu_die_common(cpu);
+
xen_smp_intr_free(cpu);
xen_uninit_lock_cpu(cpu);
xen_teardown_timer(cpu);
cycle_t ret;
preempt_disable_notrace();
- src = this_cpu_ptr(&xen_vcpu->time);
+ src = &__this_cpu_read(xen_vcpu)->time;
ret = pvclock_clocksource_read(src);
preempt_enable_notrace();
return ret;
config XTENSA_PLATFORM_XTFPGA
bool "XTFPGA"
+ select ETHOC if ETHERNET
select SERIAL_CONSOLE
- select ETHOC
select XTENSA_CALIBRATE_CCOUNT
help
XTFPGA is the name of Tensilica board family (LX60, LX110, LX200, ML605).
config BLK_DEV_SIMDISK
tristate "Host file-based simulated block device support"
default n
- depends on XTENSA_PLATFORM_ISS
+ depends on XTENSA_PLATFORM_ISS && BLOCK
help
Create block devices that map to files in the host file system.
Device binding to host file may be changed at runtime via proc
--- /dev/null
+/dts-v1/;
+/include/ "xtfpga.dtsi"
+/include/ "xtfpga-flash-16m.dtsi"
+
+/ {
+ compatible = "cdns,xtensa-lx200";
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x06000000>;
+ };
+ pic: pic {
+ compatible = "cdns,xtensa-mx";
+ #interrupt-cells = <2>;
+ interrupt-controller;
+ };
+};
--- /dev/null
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_MEMCG=y
+CONFIG_NAMESPACES=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_XTENSA_VARIANT_DC233C=y
+CONFIG_XTENSA_UNALIGNED_USER=y
+CONFIG_PREEMPT=y
+CONFIG_HIGHMEM=y
+# CONFIG_PCI is not set
+CONFIG_XTENSA_PLATFORM_XTFPGA=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug"
+CONFIG_USE_OF=y
+CONFIG_BUILTIN_DTB="kc705"
+# CONFIG_COMPACTION is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+CONFIG_MTD=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_MARVELL_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_SOFT_WATCHDOG=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_SWAP=y
+CONFIG_ROOT_NFS=y
+CONFIG_SUNRPC_DEBUG=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_DEBUG_INFO=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_LOCKUP_DETECTOR=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_ATOMIC_SLEEP=y
+CONFIG_STACKTRACE=y
+CONFIG_RCU_TRACE=y
+# CONFIG_FTRACE is not set
+CONFIG_LD_NO_RELAX=y
+# CONFIG_S32C1I_SELFTEST is not set
+CONFIG_CRYPTO_ANSI_CPRNG=y
--- /dev/null
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IRQ_TIME_ACCOUNTING=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_MEMCG=y
+CONFIG_NAMESPACES=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_RELAY=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EXPERT=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_XTENSA_VARIANT_CUSTOM=y
+CONFIG_XTENSA_VARIANT_CUSTOM_NAME="test_mmuhifi_c3"
+CONFIG_XTENSA_UNALIGNED_USER=y
+CONFIG_PREEMPT=y
+CONFIG_HAVE_SMP=y
+CONFIG_SMP=y
+CONFIG_HOTPLUG_CPU=y
+# CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX is not set
+# CONFIG_PCI is not set
+CONFIG_XTENSA_PLATFORM_XTFPGA=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 ip=dhcp root=/dev/nfs rw debug"
+CONFIG_USE_OF=y
+CONFIG_BUILTIN_DTB="lx200mx"
+# CONFIG_COMPACTION is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+# CONFIG_IPV6 is not set
+CONFIG_NETFILTER=y
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+CONFIG_MTD=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_JEDECPROBE=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_STAA=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_ARC is not set
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SAMSUNG is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_VIA is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_MARVELL_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+CONFIG_HW_RANDOM=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_SOFT_WATCHDOG=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_NFS_SWAP=y
+CONFIG_ROOT_NFS=y
+CONFIG_SUNRPC_DEBUG=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_PRINTK_TIME=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_DEBUG_INFO=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_VM=y
+CONFIG_LOCKUP_DETECTOR=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_DEBUG_ATOMIC_SLEEP=y
+CONFIG_STACKTRACE=y
+CONFIG_RCU_TRACE=y
+# CONFIG_FTRACE is not set
+CONFIG_LD_NO_RELAX=y
+# CONFIG_S32C1I_SELFTEST is not set
+CONFIG_CRYPTO_ANSI_CPRNG=y
#endif /* CONFIG_MMU */
-/*
- * Generic I/O
- */
-#define readb_relaxed readb
-#define readw_relaxed readw
-#define readl_relaxed readl
-
#endif /* __KERNEL__ */
#include <asm-generic/io.h>
static inline pte_t pte_mkspecial(pte_t pte)
{ return pte; }
+#define pgprot_noncached(prot) (__pgprot(pgprot_val(prot) & ~_PAGE_CA_MASK))
+
/*
* Conversion functions: convert a page and protection to a page entry,
* and a page entry and page directory to the page they refer to.
#define __NR_pivot_root 175
__SYSCALL(175, sys_pivot_root, 2)
#define __NR_umount 176
-__SYSCALL(176, sys_umount, 2)
+__SYSCALL(176, sys_oldumount, 1)
+#define __ARCH_WANT_SYS_OLDUMOUNT
#define __NR_swapoff 177
__SYSCALL(177, sys_swapoff, 1)
#define __NR_sync 178
#define __NR_renameat2 336
__SYSCALL(336, sys_renameat2, 5)
-#define __NR_syscall_count 337
+#define __NR_seccomp 337
+__SYSCALL(337, sys_seccomp, 3)
+#define __NR_getrandom 338
+__SYSCALL(338, sys_getrandom, 3)
+#define __NR_memfd_create 339
+__SYSCALL(339, sys_memfd_create, 2)
+
+#define __NR_syscall_count 340
/*
* sysxtensa syscall handler
{
struct blk_integrity *bi = bdev_get_integrity(bio->bi_bdev);
struct blk_integrity_iter iter;
- struct bio_vec *bv;
+ struct bvec_iter bviter;
+ struct bio_vec bv;
struct bio_integrity_payload *bip = bio_integrity(bio);
- unsigned int i, ret = 0;
+ unsigned int ret = 0;
void *prot_buf = page_address(bip->bip_vec->bv_page) +
bip->bip_vec->bv_offset;
iter.seed = bip_get_seed(bip);
iter.prot_buf = prot_buf;
- bio_for_each_segment_all(bv, bio, i) {
- void *kaddr = kmap_atomic(bv->bv_page);
+ bio_for_each_segment(bv, bio, bviter) {
+ void *kaddr = kmap_atomic(bv.bv_page);
- iter.data_buf = kaddr + bv->bv_offset;
- iter.data_size = bv->bv_len;
+ iter.data_buf = kaddr + bv.bv_offset;
+ iter.data_size = bv.bv_len;
ret = proc_fn(&iter);
if (ret) {
blk_clear_rq_complete(rq);
trace_block_rq_requeue(q, rq);
- if (blk_rq_tagged(rq))
+ if (rq->cmd_flags & REQ_QUEUED)
blk_queue_end_tag(q, rq);
BUG_ON(blk_queued_rq(rq));
*/
void blk_finish_request(struct request *req, int error)
{
- if (blk_rq_tagged(req))
+ if (req->cmd_flags & REQ_QUEUED)
blk_queue_end_tag(req->q, req);
BUG_ON(blk_queued_rq(req));
void blk_recount_segments(struct request_queue *q, struct bio *bio)
{
- bool no_sg_merge = !!test_bit(QUEUE_FLAG_NO_SG_MERGE,
- &q->queue_flags);
+ unsigned short seg_cnt;
+
+ /* estimate segment number by bi_vcnt for non-cloned bio */
+ if (bio_flagged(bio, BIO_CLONED))
+ seg_cnt = bio_segments(bio);
+ else
+ seg_cnt = bio->bi_vcnt;
- if (no_sg_merge && !bio_flagged(bio, BIO_CLONED) &&
- bio->bi_vcnt < queue_max_segments(q))
- bio->bi_phys_segments = bio->bi_vcnt;
+ if (test_bit(QUEUE_FLAG_NO_SG_MERGE, &q->queue_flags) &&
+ (seg_cnt < queue_max_segments(q)))
+ bio->bi_phys_segments = seg_cnt;
else {
struct bio *nxt = bio->bi_next;
bio->bi_next = NULL;
- bio->bi_phys_segments = __blk_recalc_rq_segments(q, bio,
- no_sg_merge);
+ bio->bi_phys_segments = __blk_recalc_rq_segments(q, bio, false);
bio->bi_next = nxt;
}
return 0;
}
+/**
+ * blk_mq_unique_tag() - return a tag that is unique queue-wide
+ * @rq: request for which to compute a unique tag
+ *
+ * The tag field in struct request is unique per hardware queue but not over
+ * all hardware queues. Hence this function that returns a tag with the
+ * hardware context index in the upper bits and the per hardware queue tag in
+ * the lower bits.
+ *
+ * Note: When called for a request that is queued on a non-multiqueue request
+ * queue, the hardware context index is set to zero.
+ */
+u32 blk_mq_unique_tag(struct request *rq)
+{
+ struct request_queue *q = rq->q;
+ struct blk_mq_hw_ctx *hctx;
+ int hwq = 0;
+
+ if (q->mq_ops) {
+ hctx = q->mq_ops->map_queue(q, rq->mq_ctx->cpu);
+ hwq = hctx->queue_num;
+ }
+
+ return (hwq << BLK_MQ_UNIQUE_TAG_BITS) |
+ (rq->tag & BLK_MQ_UNIQUE_TAG_MASK);
+}
+EXPORT_SYMBOL(blk_mq_unique_tag);
+
ssize_t blk_mq_tag_sysfs_show(struct blk_mq_tags *tags, char *page)
{
char *orig_page = page;
wake_up_all(&q->mq_freeze_wq);
}
-/*
- * Guarantee no request is in use, so we can change any data structure of
- * the queue afterward.
- */
-void blk_mq_freeze_queue(struct request_queue *q)
+static void blk_mq_freeze_queue_start(struct request_queue *q)
{
bool freeze;
percpu_ref_kill(&q->mq_usage_counter);
blk_mq_run_queues(q, false);
}
+}
+
+static void blk_mq_freeze_queue_wait(struct request_queue *q)
+{
wait_event(q->mq_freeze_wq, percpu_ref_is_zero(&q->mq_usage_counter));
}
+/*
+ * Guarantee no request is in use, so we can change any data structure of
+ * the queue afterward.
+ */
+void blk_mq_freeze_queue(struct request_queue *q)
+{
+ blk_mq_freeze_queue_start(q);
+ blk_mq_freeze_queue_wait(q);
+}
+
static void blk_mq_unfreeze_queue(struct request_queue *q)
{
bool wake;
/* Basically redo blk_mq_init_queue with queue frozen */
static void blk_mq_queue_reinit(struct request_queue *q)
{
- blk_mq_freeze_queue(q);
+ WARN_ON_ONCE(!q->mq_freeze_depth);
blk_mq_sysfs_unregister(q);
blk_mq_map_swqueue(q);
blk_mq_sysfs_register(q);
-
- blk_mq_unfreeze_queue(q);
}
static int blk_mq_queue_reinit_notify(struct notifier_block *nb,
return NOTIFY_OK;
mutex_lock(&all_q_mutex);
+
+ /*
+ * We need to freeze and reinit all existing queues. Freezing
+ * involves synchronous wait for an RCU grace period and doing it
+ * one by one may take a long time. Start freezing all queues in
+ * one swoop and then wait for the completions so that freezing can
+ * take place in parallel.
+ */
+ list_for_each_entry(q, &all_q_list, all_q_node)
+ blk_mq_freeze_queue_start(q);
+ list_for_each_entry(q, &all_q_list, all_q_node)
+ blk_mq_freeze_queue_wait(q);
+
list_for_each_entry(q, &all_q_list, all_q_node)
blk_mq_queue_reinit(q);
+
+ list_for_each_entry(q, &all_q_list, all_q_node)
+ blk_mq_unfreeze_queue(q);
+
mutex_unlock(&all_q_mutex);
return NOTIFY_OK;
}
*/
int blk_mq_alloc_tag_set(struct blk_mq_tag_set *set)
{
+ BUILD_BUG_ON(BLK_MQ_MAX_DEPTH > 1 << BLK_MQ_UNIQUE_TAG_BITS);
+
if (!set->nr_hw_queues)
return -EINVAL;
if (!set->queue_depth)
}
err = e->ops.elevator_init_fn(q, e);
- return 0;
+ if (err)
+ elevator_put(e);
+ return err;
}
EXPORT_SYMBOL(elevator_init);
int ioprio_best(unsigned short aprio, unsigned short bprio)
{
- unsigned short aclass = IOPRIO_PRIO_CLASS(aprio);
- unsigned short bclass = IOPRIO_PRIO_CLASS(bprio);
+ unsigned short aclass;
+ unsigned short bclass;
- if (aclass == IOPRIO_CLASS_NONE)
- aclass = IOPRIO_CLASS_BE;
- if (bclass == IOPRIO_CLASS_NONE)
- bclass = IOPRIO_CLASS_BE;
+ if (!ioprio_valid(aprio))
+ aprio = IOPRIO_PRIO_VALUE(IOPRIO_CLASS_BE, IOPRIO_NORM);
+ if (!ioprio_valid(bprio))
+ bprio = IOPRIO_PRIO_VALUE(IOPRIO_CLASS_BE, IOPRIO_NORM);
+ aclass = IOPRIO_PRIO_CLASS(aprio);
+ bclass = IOPRIO_PRIO_CLASS(bprio);
if (aclass == bclass)
return min(aprio, bprio);
if (aclass > bclass)
__set_bit(GPCMD_VERIFY_10, filter->read_ok);
__set_bit(VERIFY_16, filter->read_ok);
__set_bit(REPORT_LUNS, filter->read_ok);
- __set_bit(SERVICE_ACTION_IN, filter->read_ok);
+ __set_bit(SERVICE_ACTION_IN_16, filter->read_ok);
__set_bit(RECEIVE_DIAGNOSTIC, filter->read_ok);
__set_bit(MAINTENANCE_IN, filter->read_ok);
__set_bit(GPCMD_READ_BUFFER_CAPACITY, filter->read_ok);
rq = blk_get_request(q, in_len ? WRITE : READ, __GFP_WAIT);
if (IS_ERR(rq)) {
err = PTR_ERR(rq);
- goto error;
+ goto error_free_buffer;
}
blk_rq_set_block_pc(rq);
if (bytes && blk_rq_map_kern(q, rq, buffer, bytes, __GFP_WAIT)) {
err = DRIVER_ERROR << 24;
- goto out;
+ goto error;
}
memset(sense, 0, sizeof(sense));
blk_execute_rq(q, disk, rq, 0);
-out:
err = rq->errors & 0xff; /* only 8 bit SCSI status */
if (err) {
if (rq->sense_len && rq->sense) {
}
error:
+ blk_put_request(rq);
+
+error_free_buffer:
kfree(buffer);
- if (rq)
- blk_put_request(rq);
+
return err;
}
EXPORT_SYMBOL_GPL(sg_scsi_ioctl);
/* 5. Append the tail (BB - Ln) bytes of Xn (tmp) to Cn to create En */
memcpy(s + bsize + lastn, tmp + lastn, bsize - lastn);
/* 6. Decrypt En to create Pn-1 */
- memset(iv, 0, sizeof(iv));
+ memzero_explicit(iv, sizeof(iv));
+
sg_set_buf(&sgsrc[0], s + bsize, bsize);
sg_set_buf(&sgdst[0], d, bsize);
err = crypto_blkcipher_decrypt_iv(&lcldesc, sgdst, sgsrc, bsize);
src = data + done;
} while (done + SHA1_BLOCK_SIZE <= len);
- memset(temp, 0, sizeof(temp));
+ memzero_explicit(temp, sizeof(temp));
partial = 0;
}
memcpy(sctx->buffer + partial, src, len - done);
/* clear any sensitive info... */
a = b = c = d = e = f = g = h = t1 = t2 = 0;
- memset(W, 0, 64 * sizeof(u32));
+ memzero_explicit(W, 64 * sizeof(u32));
}
-
static int sha224_init(struct shash_desc *desc)
{
struct sha256_state *sctx = shash_desc_ctx(desc);
sha256_final(desc, D);
memcpy(hash, D, SHA224_DIGEST_SIZE);
- memset(D, 0, SHA256_DIGEST_SIZE);
+ memzero_explicit(D, SHA256_DIGEST_SIZE);
return 0;
}
sha512_final(desc, D);
memcpy(hash, D, 48);
- memset(D, 0, 64);
+ memzero_explicit(D, 64);
return 0;
}
tgr192_final(desc, D);
memcpy(out, D, TGR160_DIGEST_SIZE);
- memset(D, 0, TGR192_DIGEST_SIZE);
+ memzero_explicit(D, TGR192_DIGEST_SIZE);
return 0;
}
tgr192_final(desc, D);
memcpy(out, D, TGR128_DIGEST_SIZE);
- memset(D, 0, TGR192_DIGEST_SIZE);
+ memzero_explicit(D, TGR192_DIGEST_SIZE);
return 0;
}
}
mac = vmac(ctx->partial, ctx->partial_size, nonce, NULL, ctx);
memcpy(out, &mac, sizeof(vmac_t));
- memset(&mac, 0, sizeof(vmac_t));
+ memzero_explicit(&mac, sizeof(vmac_t));
memset(&ctx->__vmac_ctx, 0, sizeof(struct vmac_ctx));
ctx->partial_size = 0;
return 0;
u8 D[64];
wp512_final(desc, D);
- memcpy (out, D, WP384_DIGEST_SIZE);
- memset (D, 0, WP512_DIGEST_SIZE);
+ memcpy(out, D, WP384_DIGEST_SIZE);
+ memzero_explicit(D, WP512_DIGEST_SIZE);
return 0;
}
u8 D[64];
wp512_final(desc, D);
- memcpy (out, D, WP256_DIGEST_SIZE);
- memset (D, 0, WP512_DIGEST_SIZE);
+ memcpy(out, D, WP256_DIGEST_SIZE);
+ memzero_explicit(D, WP512_DIGEST_SIZE);
return 0;
}
menu "Device Drivers"
+source "drivers/amba/Kconfig"
+
source "drivers/base/Kconfig"
source "drivers/bus/Kconfig"
config ACPI_FAN
tristate "Fan"
- select THERMAL
+ depends on THERMAL
default y
help
This driver supports ACPI fan devices, allowing user-mode
acpi-y += acpi_lpss.o
acpi-y += acpi_platform.o
acpi-y += acpi_pnp.o
+acpi-y += int340x_thermal.o
acpi-y += power.o
acpi-y += event.o
acpi-y += sysfs.o
#include <linux/err.h>
#include <linux/kernel.h>
#include <linux/module.h>
+#include <linux/dma-mapping.h>
#include <linux/platform_device.h>
#include "internal.h"
pdevinfo.res = resources;
pdevinfo.num_res = count;
pdevinfo.acpi_node.companion = adev;
+ pdevinfo.dma_mask = DMA_BIT_MASK(32);
pdev = platform_device_register_full(&pdevinfo);
if (IS_ERR(pdev))
dev_err(&adev->dev, "platform device creation failed: %ld\n",
kfree(resources);
return pdev;
}
+EXPORT_SYMBOL_GPL(acpi_create_platform_device);
acpi_status
acpi_hw_get_gpe_status(struct acpi_gpe_event_info *gpe_event_info,
- acpi_event_status * event_status);
+ acpi_event_status *event_status);
acpi_status acpi_hw_disable_all_gpes(void);
acpi_gpe_handler address; /* Address of handler, if any */
void *context; /* Context to be passed to handler */
struct acpi_namespace_node *method_node; /* Method node for this GPE level (saved) */
- u8 original_flags; /* Original (pre-handler) GPE info */
- u8 originally_enabled; /* True if GPE was originally enabled */
+ u8 original_flags; /* Original (pre-handler) GPE info */
+ u8 originally_enabled; /* True if GPE was originally enabled */
};
/* Notify info for implicit notify, multiple device objects */
/*
* tbxfroot - Root pointer utilities
*/
+u32 acpi_tb_get_rsdp_length(struct acpi_table_rsdp *rsdp);
+
acpi_status acpi_tb_validate_rsdp(struct acpi_table_rsdp *rsdp);
u8 *acpi_tb_scan_memory_for_rsdp(u8 *start_address, u32 length);
struct asl_resource_node *next;
};
+struct asl_resource_info {
+ union acpi_parse_object *descriptor_type_op; /* Resource descriptor parse node */
+ union acpi_parse_object *mapping_op; /* Used for mapfile support */
+ u32 current_byte_offset; /* Offset in resource template */
+};
+
/* Macros used to generate AML resource length fields */
#define ACPI_AML_SIZE_LARGE(r) (sizeof (r) - sizeof (struct aml_resource_large_header))
u8 byte_item;
};
+/* Interfaces used by both the disassembler and compiler */
+
+void
+mp_save_gpio_info(union acpi_parse_object *op,
+ union aml_resource *resource,
+ u32 pin_count, u16 *pin_list, char *device_name);
+
+void
+mp_save_serial_info(union acpi_parse_object *op,
+ union aml_resource *resource, char *device_name);
+
+char *mp_get_hid_from_parse_tree(struct acpi_namespace_node *hid_node);
+
+char *mp_get_hid_via_namestring(char *device_name);
+
+char *mp_get_connection_info(union acpi_parse_object *op,
+ u32 pin_index,
+ struct acpi_namespace_node **target_node,
+ char **target_name);
+
+char *mp_get_parent_device_hid(union acpi_parse_object *op,
+ struct acpi_namespace_node **target_node,
+ char **parent_device_name);
+
+char *mp_get_ddn_value(char *device_name);
+
+char *mp_get_hid_value(struct acpi_namespace_node *device_node);
+
#endif
*
* FUNCTION: acpi_ev_enable_gpe
*
- * PARAMETERS: gpe_event_info - GPE to enable
+ * PARAMETERS: gpe_event_info - GPE to enable
*
* RETURN: Status
*
* DESCRIPTION: Clear a GPE of stale events and enable it.
*
******************************************************************************/
+
acpi_status acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
{
acpi_status status;
}
/* Clear the GPE (of stale events) */
+
status = acpi_hw_clear_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
return_ACPI_STATUS(status);
}
-
/*******************************************************************************
*
* FUNCTION: acpi_ev_add_gpe_reference
if (ACPI_SUCCESS(status)) {
status =
acpi_hw_low_set_gpe(gpe_event_info,
- ACPI_GPE_DISABLE);
+ ACPI_GPE_DISABLE);
}
if (ACPI_FAILURE(status)) {
*
******************************************************************************/
-u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info * gpe_xrupt_list)
+u32 acpi_ev_gpe_detect(struct acpi_gpe_xrupt_info *gpe_xrupt_list)
{
acpi_status status;
struct acpi_gpe_block_info *gpe_block;
/* Check if there is anything active at all in this register */
- enabled_status_byte = (u8) (status_reg & enable_reg);
+ enabled_status_byte = (u8)(status_reg & enable_reg);
if (!enabled_status_byte) {
/* No active GPEs in this register, move on */
acpi_ev_gpe_dispatch(gpe_block->
node,
&gpe_block->
- event_info[((acpi_size) i * ACPI_GPE_REGISTER_WIDTH) + j], j + gpe_register_info->base_gpe_number);
+ event_info[((acpi_size) i * ACPI_GPE_REGISTER_WIDTH) + j], j + gpe_register_info->base_gpe_number);
}
}
}
*
******************************************************************************/
-acpi_status acpi_ev_finish_gpe(struct acpi_gpe_event_info *gpe_event_info)
+acpi_status acpi_ev_finish_gpe(struct acpi_gpe_event_info * gpe_event_info)
{
acpi_status status;
*
* FUNCTION: acpi_ev_gpe_dispatch
*
- * PARAMETERS: gpe_device - Device node. NULL for GPE0/GPE1
- * gpe_event_info - Info for this GPE
- * gpe_number - Number relative to the parent GPE block
+ * PARAMETERS: gpe_device - Device node. NULL for GPE0/GPE1
+ * gpe_event_info - Info for this GPE
+ * gpe_number - Number relative to the parent GPE block
*
* RETURN: INTERRUPT_HANDLED or INTERRUPT_NOT_HANDLED
*
u32
acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device,
- struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
+ struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
{
acpi_status status;
u32 return_value;
}
/* Disable the GPE in case it's been enabled already. */
+
(void)acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
/*
handler->method_node = gpe_event_info->dispatch.method_node;
handler->original_flags = (u8)(gpe_event_info->flags &
(ACPI_GPE_XRUPT_TYPE_MASK |
- ACPI_GPE_DISPATCH_MASK));
+ ACPI_GPE_DISPATCH_MASK));
/*
* If the GPE is associated with a method, it may have been enabled
* automatically during initialization, in which case it has to be
* disabled now to avoid spurious execution of the handler.
*/
-
- if ((handler->original_flags & ACPI_GPE_DISPATCH_METHOD)
- && gpe_event_info->runtime_count) {
- handler->originally_enabled = 1;
+ if (((handler->original_flags & ACPI_GPE_DISPATCH_METHOD) ||
+ (handler->original_flags & ACPI_GPE_DISPATCH_NOTIFY)) &&
+ gpe_event_info->runtime_count) {
+ handler->originally_enabled = TRUE;
(void)acpi_ev_remove_gpe_reference(gpe_event_info);
+
+ /* Sanity check of original type against new type */
+
+ if (type !=
+ (u32)(gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK)) {
+ ACPI_WARNING((AE_INFO,
+ "GPE type mismatch (level/edge)"));
+ }
}
/* Install the handler */
gpe_event_info->flags &=
~(ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK);
- gpe_event_info->flags |= (u8) (type | ACPI_GPE_DISPATCH_HANDLER);
+ gpe_event_info->flags |= (u8)(type | ACPI_GPE_DISPATCH_HANDLER);
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
gpe_event_info->dispatch.method_node = handler->method_node;
gpe_event_info->flags &=
- ~(ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK);
+ ~(ACPI_GPE_XRUPT_TYPE_MASK | ACPI_GPE_DISPATCH_MASK);
gpe_event_info->flags |= handler->original_flags;
/*
* enabled, it should be enabled at this point to restore the
* post-initialization configuration.
*/
- if ((handler->original_flags & ACPI_GPE_DISPATCH_METHOD) &&
+ if (((handler->original_flags & ACPI_GPE_DISPATCH_METHOD) ||
+ (handler->original_flags & ACPI_GPE_DISPATCH_NOTIFY)) &&
handler->originally_enabled) {
(void)acpi_ev_add_gpe_reference(gpe_event_info);
}
* handle is returned.
*
******************************************************************************/
-acpi_status acpi_acquire_global_lock(u16 timeout, u32 * handle)
+acpi_status acpi_acquire_global_lock(u16 timeout, u32 *handle)
{
acpi_status status;
******************************************************************************/
acpi_status acpi_get_event_status(u32 event, acpi_event_status * event_status)
{
- acpi_status status = AE_OK;
- u32 value;
+ acpi_status status;
+ acpi_event_status local_event_status = 0;
+ u32 in_byte;
ACPI_FUNCTION_TRACE(acpi_get_event_status);
return_ACPI_STATUS(AE_BAD_PARAMETER);
}
- /* Get the status of the requested fixed event */
+ /* Fixed event currently can be dispatched? */
+
+ if (acpi_gbl_fixed_event_handlers[event].handler) {
+ local_event_status |= ACPI_EVENT_FLAG_HAS_HANDLER;
+ }
+
+ /* Fixed event currently enabled? */
status =
acpi_read_bit_register(acpi_gbl_fixed_event_info[event].
- enable_register_id, &value);
- if (ACPI_FAILURE(status))
+ enable_register_id, &in_byte);
+ if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
+ }
- *event_status = value;
+ if (in_byte) {
+ local_event_status |= ACPI_EVENT_FLAG_ENABLED;
+ }
+
+ /* Fixed event currently active? */
status =
acpi_read_bit_register(acpi_gbl_fixed_event_info[event].
- status_register_id, &value);
- if (ACPI_FAILURE(status))
+ status_register_id, &in_byte);
+ if (ACPI_FAILURE(status)) {
return_ACPI_STATUS(status);
+ }
- if (value)
- *event_status |= ACPI_EVENT_FLAG_SET;
-
- if (acpi_gbl_fixed_event_handlers[event].handler)
- *event_status |= ACPI_EVENT_FLAG_HANDLE;
+ if (in_byte) {
+ local_event_status |= ACPI_EVENT_FLAG_SET;
+ }
- return_ACPI_STATUS(status);
+ (*event_status) = local_event_status;
+ return_ACPI_STATUS(AE_OK);
}
ACPI_EXPORT_SYMBOL(acpi_get_event_status)
*
* FUNCTION: acpi_enable_gpe
*
- * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
- * gpe_number - GPE level within the GPE block
+ * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
+ * gpe_number - GPE level within the GPE block
*
* RETURN: Status
*
* hardware-enabled.
*
******************************************************************************/
-
acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number)
{
acpi_status status = AE_BAD_PARAMETER;
*
* FUNCTION: acpi_get_gpe_status
*
- * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
- * gpe_number - GPE level within the GPE block
+ * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
+ * gpe_number - GPE level within the GPE block
* event_status - Where the current status of the event
* will be returned
*
status = acpi_hw_get_gpe_status(gpe_event_info, event_status);
- if (gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)
- *event_status |= ACPI_EVENT_FLAG_HANDLE;
-
unlock_and_exit:
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
return_ACPI_STATUS(status);
acpi_status
acpi_hw_get_gpe_status(struct acpi_gpe_event_info * gpe_event_info,
- acpi_event_status * event_status)
+ acpi_event_status *event_status)
{
u32 in_byte;
u32 register_bit;
return (AE_BAD_PARAMETER);
}
+ /* GPE currently handled? */
+
+ if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) !=
+ ACPI_GPE_DISPATCH_NONE) {
+ local_event_status |= ACPI_EVENT_FLAG_HAS_HANDLER;
+ }
+
/* Get the info block for the entire GPE register */
gpe_register_info = gpe_event_info->register_info;
#define _COMPONENT ACPI_TABLES
ACPI_MODULE_NAME("tbxfroot")
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_tb_get_rsdp_length
+ *
+ * PARAMETERS: rsdp - Pointer to RSDP
+ *
+ * RETURN: Table length
+ *
+ * DESCRIPTION: Get the length of the RSDP
+ *
+ ******************************************************************************/
+u32 acpi_tb_get_rsdp_length(struct acpi_table_rsdp *rsdp)
+{
+
+ if (!ACPI_VALIDATE_RSDP_SIG(rsdp->signature)) {
+
+ /* BAD Signature */
+
+ return (0);
+ }
+
+ /* "Length" field is available if table version >= 2 */
+
+ if (rsdp->revision >= 2) {
+ return (rsdp->length);
+ } else {
+ return (ACPI_RSDP_CHECKSUM_LENGTH);
+ }
+}
+
/*******************************************************************************
*
* FUNCTION: acpi_tb_validate_rsdp
* DESCRIPTION: Validate the RSDP (ptr)
*
******************************************************************************/
-acpi_status acpi_tb_validate_rsdp(struct acpi_table_rsdp *rsdp)
+
+acpi_status acpi_tb_validate_rsdp(struct acpi_table_rsdp * rsdp)
{
/*
DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 3446"),
},
},
+ {
+ .callback = dmi_disable_osi_win8,
+ .ident = "Dell Vostro 3546",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Vostro 3546"),
+ },
+ },
/*
* BIOS invocation of _OSI(Linux) is almost always a BIOS bug.
return 0;
}
+EXPORT_SYMBOL_GPL(acpi_device_update_power);
int acpi_bus_update_power(acpi_handle handle, int *state_p)
{
return -ENODEV;
}
- return acpi_device_wakeup(adev, enable, ACPI_STATE_S0);
+ return acpi_device_wakeup(adev, ACPI_STATE_S0, enable);
}
EXPORT_SYMBOL(acpi_pm_device_run_wake);
#endif /* CONFIG_PM_RUNTIME */
return 0;
target_state = acpi_target_system_state();
- wakeup = device_may_wakeup(dev);
+ wakeup = device_may_wakeup(dev) && acpi_device_can_wakeup(adev);
error = acpi_device_wakeup(adev, target_state, wakeup);
if (wakeup && error)
return error;
static int EC_FLAGS_VALIDATE_ECDT; /* ASUStec ECDTs need to be validated */
static int EC_FLAGS_SKIP_DSDT_SCAN; /* Not all BIOS survive early DSDT scan */
static int EC_FLAGS_CLEAR_ON_RESUME; /* Needs acpi_ec_clear() on boot/resume */
+static int EC_FLAGS_QUERY_HANDSHAKE; /* Needs QR_EC issued when SCI_EVT set */
/* --------------------------------------------------------------------------
- Transaction Management
- -------------------------------------------------------------------------- */
+ * Transaction Management
+ * -------------------------------------------------------------------------- */
static inline u8 acpi_ec_read_status(struct acpi_ec *ec)
{
u8 x = inb(ec->command_addr);
+
pr_debug("EC_SC(R) = 0x%2.2x "
"SCI_EVT=%d BURST=%d CMD=%d IBF=%d OBF=%d\n",
x,
static inline u8 acpi_ec_read_data(struct acpi_ec *ec)
{
u8 x = inb(ec->data_addr);
+
pr_debug("EC_DATA(R) = 0x%2.2x\n", x);
return x;
}
outb(data, ec->data_addr);
}
+#ifdef DEBUG
+static const char *acpi_ec_cmd_string(u8 cmd)
+{
+ switch (cmd) {
+ case 0x80:
+ return "RD_EC";
+ case 0x81:
+ return "WR_EC";
+ case 0x82:
+ return "BE_EC";
+ case 0x83:
+ return "BD_EC";
+ case 0x84:
+ return "QR_EC";
+ }
+ return "UNKNOWN";
+}
+#else
+#define acpi_ec_cmd_string(cmd) "UNDEF"
+#endif
+
static int ec_transaction_completed(struct acpi_ec *ec)
{
unsigned long flags;
int ret = 0;
+
spin_lock_irqsave(&ec->lock, flags);
if (ec->curr && (ec->curr->flags & ACPI_EC_COMMAND_COMPLETE))
ret = 1;
u8 status;
bool wakeup = false;
- pr_debug("===== %s =====\n", in_interrupt() ? "IRQ" : "TASK");
+ pr_debug("===== %s (%d) =====\n",
+ in_interrupt() ? "IRQ" : "TASK", smp_processor_id());
status = acpi_ec_read_status(ec);
t = ec->curr;
if (!t)
if (t->rlen == t->ri) {
t->flags |= ACPI_EC_COMMAND_COMPLETE;
if (t->command == ACPI_EC_COMMAND_QUERY)
- pr_debug("hardware QR_EC completion\n");
+ pr_debug("***** Command(%s) hardware completion *****\n",
+ acpi_ec_cmd_string(t->command));
wakeup = true;
}
} else
}
return wakeup;
} else {
- /*
- * There is firmware refusing to respond QR_EC when SCI_EVT
- * is not set, for which case, we complete the QR_EC
- * without issuing it to the firmware.
- * https://bugzilla.kernel.org/show_bug.cgi?id=86211
- */
- if (!(status & ACPI_EC_FLAG_SCI) &&
+ if (EC_FLAGS_QUERY_HANDSHAKE &&
+ !(status & ACPI_EC_FLAG_SCI) &&
(t->command == ACPI_EC_COMMAND_QUERY)) {
t->flags |= ACPI_EC_COMMAND_POLL;
t->rdata[t->ri++] = 0x00;
t->flags |= ACPI_EC_COMMAND_COMPLETE;
- pr_debug("software QR_EC completion\n");
+ pr_debug("***** Command(%s) software completion *****\n",
+ acpi_ec_cmd_string(t->command));
wakeup = true;
} else if ((status & ACPI_EC_FLAG_IBF) == 0) {
acpi_ec_write_cmd(ec, t->command);
{
unsigned long flags;
int repeat = 5; /* number of command restarts */
+
while (repeat--) {
unsigned long delay = jiffies +
msecs_to_jiffies(ec_delay);
{
unsigned long tmp;
int ret = 0;
+
if (EC_FLAGS_MSI)
udelay(ACPI_EC_MSI_UDELAY);
/* start transaction */
spin_lock_irqsave(&ec->lock, tmp);
/* following two actions should be kept atomic */
ec->curr = t;
+ pr_debug("***** Command(%s) started *****\n",
+ acpi_ec_cmd_string(t->command));
start_transaction(ec);
+ if (ec->curr->command == ACPI_EC_COMMAND_QUERY) {
+ clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
+ pr_debug("***** Event stopped *****\n");
+ }
spin_unlock_irqrestore(&ec->lock, tmp);
ret = ec_poll(ec);
spin_lock_irqsave(&ec->lock, tmp);
- if (ec->curr->command == ACPI_EC_COMMAND_QUERY)
- clear_bit(EC_FLAGS_QUERY_PENDING, &ec->flags);
+ pr_debug("***** Command(%s) stopped *****\n",
+ acpi_ec_cmd_string(t->command));
ec->curr = NULL;
spin_unlock_irqrestore(&ec->lock, tmp);
return ret;
{
int status;
u32 glk;
+
if (!ec || (!t) || (t->wlen && !t->wdata) || (t->rlen && !t->rdata))
return -EINVAL;
if (t->rdata)
goto unlock;
}
}
- pr_debug("transaction start (cmd=0x%02x, addr=0x%02x)\n",
- t->command, t->wdata ? t->wdata[0] : 0);
/* disable GPE during transaction if storm is detected */
if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) {
/* It has to be disabled, so that it doesn't trigger. */
t->irq_count);
set_bit(EC_FLAGS_GPE_STORM, &ec->flags);
}
- pr_debug("transaction end\n");
if (ec->global_lock)
acpi_release_global_lock(glk);
unlock:
acpi_ec_transaction(ec, &t) : 0;
}
-static int acpi_ec_read(struct acpi_ec *ec, u8 address, u8 * data)
+static int acpi_ec_read(struct acpi_ec *ec, u8 address, u8 *data)
{
int result;
u8 d;
if (!err) {
*val = temp_data;
return 0;
- } else
- return err;
+ }
+ return err;
}
-
EXPORT_SYMBOL(ec_read);
int ec_write(u8 addr, u8 val)
return err;
}
-
EXPORT_SYMBOL(ec_write);
int ec_transaction(u8 command,
- const u8 * wdata, unsigned wdata_len,
- u8 * rdata, unsigned rdata_len)
+ const u8 *wdata, unsigned wdata_len,
+ u8 *rdata, unsigned rdata_len)
{
struct transaction t = {.command = command,
.wdata = wdata, .rdata = rdata,
.wlen = wdata_len, .rlen = rdata_len};
+
if (!first_ec)
return -ENODEV;
return acpi_ec_transaction(first_ec, &t);
}
-
EXPORT_SYMBOL(ec_transaction);
/* Get the handle to the EC device */
return NULL;
return first_ec->handle;
}
-
EXPORT_SYMBOL(ec_get_handle);
/*
clear_bit(EC_FLAGS_BLOCKED, &first_ec->flags);
}
-static int acpi_ec_query_unlocked(struct acpi_ec *ec, u8 * data)
+static int acpi_ec_query_unlocked(struct acpi_ec *ec, u8 *data)
{
int result;
u8 d;
struct transaction t = {.command = ACPI_EC_COMMAND_QUERY,
.wdata = NULL, .rdata = &d,
.wlen = 0, .rlen = 1};
+
if (!ec || !data)
return -EINVAL;
/*
{
struct acpi_ec_query_handler *handler =
kzalloc(sizeof(struct acpi_ec_query_handler), GFP_KERNEL);
+
if (!handler)
return -ENOMEM;
mutex_unlock(&ec->mutex);
return 0;
}
-
EXPORT_SYMBOL_GPL(acpi_ec_add_query_handler);
void acpi_ec_remove_query_handler(struct acpi_ec *ec, u8 query_bit)
{
struct acpi_ec_query_handler *handler, *tmp;
+
mutex_lock(&ec->mutex);
list_for_each_entry_safe(handler, tmp, &ec->list, node) {
if (query_bit == handler->query_bit) {
}
mutex_unlock(&ec->mutex);
}
-
EXPORT_SYMBOL_GPL(acpi_ec_remove_query_handler);
static void acpi_ec_run(void *cxt)
{
struct acpi_ec_query_handler *handler = cxt;
+
if (!handler)
return;
- pr_debug("start query execution\n");
+ pr_debug("##### Query(0x%02x) started #####\n", handler->query_bit);
if (handler->func)
handler->func(handler->data);
else if (handler->handle)
acpi_evaluate_object(handler->handle, NULL, NULL, NULL);
- pr_debug("stop query execution\n");
+ pr_debug("##### Query(0x%02x) stopped #####\n", handler->query_bit);
kfree(handler);
}
if (!copy)
return -ENOMEM;
memcpy(copy, handler, sizeof(*copy));
- pr_debug("push query execution (0x%2x) on queue\n",
- value);
+ pr_debug("##### Query(0x%02x) scheduled #####\n",
+ handler->query_bit);
return acpi_os_execute((copy->func) ?
OSL_NOTIFY_HANDLER : OSL_GPE_HANDLER,
acpi_ec_run, copy);
static void acpi_ec_gpe_query(void *ec_cxt)
{
struct acpi_ec *ec = ec_cxt;
+
if (!ec)
return;
mutex_lock(&ec->mutex);
{
if (state & ACPI_EC_FLAG_SCI) {
if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags)) {
- pr_debug("push gpe query to the queue\n");
+ pr_debug("***** Event started *****\n");
return acpi_os_execute(OSL_NOTIFY_HANDLER,
acpi_ec_gpe_query, ec);
}
}
/* --------------------------------------------------------------------------
- Address Space Management
- -------------------------------------------------------------------------- */
+ * Address Space Management
+ * -------------------------------------------------------------------------- */
static acpi_status
acpi_ec_space_handler(u32 function, acpi_physical_address address,
switch (result) {
case -EINVAL:
return AE_BAD_PARAMETER;
- break;
case -ENODEV:
return AE_NOT_FOUND;
- break;
case -ETIME:
return AE_TIME;
- break;
default:
return AE_OK;
}
}
/* --------------------------------------------------------------------------
- Driver Interface
- -------------------------------------------------------------------------- */
+ * Driver Interface
+ * -------------------------------------------------------------------------- */
+
static acpi_status
ec_parse_io_ports(struct acpi_resource *resource, void *context);
static struct acpi_ec *make_acpi_ec(void)
{
struct acpi_ec *ec = kzalloc(sizeof(struct acpi_ec), GFP_KERNEL);
+
if (!ec)
return NULL;
ec->flags = 1 << EC_FLAGS_QUERY_PENDING;
status = acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer);
- if (ACPI_SUCCESS(status) && sscanf(node_name, "_Q%x", &value) == 1) {
+ if (ACPI_SUCCESS(status) && sscanf(node_name, "_Q%x", &value) == 1)
acpi_ec_add_query_handler(ec, value, handle, NULL, NULL);
- }
return AE_OK;
}
{
acpi_status status;
unsigned long long tmp = 0;
-
struct acpi_ec *ec = context;
/* clear addr values, ec_parse_io_ports depend on it */
static int ec_install_handlers(struct acpi_ec *ec)
{
acpi_status status;
+
if (test_bit(EC_FLAGS_HANDLERS_INSTALLED, &ec->flags))
return 0;
status = acpi_install_gpe_handler(NULL, ec->gpe,
return 0;
}
+/*
+ * Acer EC firmware refuses to respond QR_EC when SCI_EVT is not set, for
+ * which case, we complete the QR_EC without issuing it to the firmware.
+ * https://bugzilla.kernel.org/show_bug.cgi?id=86211
+ */
+static int ec_flag_query_handshake(const struct dmi_system_id *id)
+{
+ pr_debug("Detected the EC firmware requiring QR_EC issued when SCI_EVT set\n");
+ EC_FLAGS_QUERY_HANDSHAKE = 1;
+ return 0;
+}
+
/*
* On some hardware it is necessary to clear events accumulated by the EC during
* sleep. These ECs stop reporting GPEs until they are manually polled, if too
{
ec_clear_on_resume, "Samsung hardware", {
DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD.")}, NULL},
+ {
+ ec_flag_query_handshake, "Acer hardware", {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"), }, NULL},
{},
};
boot_ec->data_addr = ecdt_ptr->data.address;
boot_ec->gpe = ecdt_ptr->gpe;
boot_ec->handle = ACPI_ROOT_OBJECT;
- acpi_get_handle(ACPI_ROOT_OBJECT, ecdt_ptr->id, &boot_ec->handle);
+ acpi_get_handle(ACPI_ROOT_OBJECT, ecdt_ptr->id,
+ &boot_ec->handle);
/* Don't trust ECDT, which comes from ASUSTek */
if (!EC_FLAGS_VALIDATE_ECDT)
goto install;
{
acpi_bus_unregister_driver(&acpi_ec_driver);
- return;
}
#endif /* 0 */
#include <linux/uaccess.h>
#include <linux/thermal.h>
#include <linux/acpi.h>
-
-#define ACPI_FAN_CLASS "fan"
-#define ACPI_FAN_FILE_STATE "state"
-
-#define _COMPONENT ACPI_FAN_COMPONENT
-ACPI_MODULE_NAME("fan");
+#include <linux/platform_device.h>
+#include <linux/sort.h>
MODULE_AUTHOR("Paul Diefenbaugh");
MODULE_DESCRIPTION("ACPI Fan Driver");
MODULE_LICENSE("GPL");
-static int acpi_fan_add(struct acpi_device *device);
-static int acpi_fan_remove(struct acpi_device *device);
+static int acpi_fan_probe(struct platform_device *pdev);
+static int acpi_fan_remove(struct platform_device *pdev);
static const struct acpi_device_id fan_device_ids[] = {
{"PNP0C0B", 0},
+ {"INT3404", 0},
{"", 0},
};
MODULE_DEVICE_TABLE(acpi, fan_device_ids);
#define FAN_PM_OPS_PTR NULL
#endif
-static struct acpi_driver acpi_fan_driver = {
- .name = "fan",
- .class = ACPI_FAN_CLASS,
- .ids = fan_device_ids,
- .ops = {
- .add = acpi_fan_add,
- .remove = acpi_fan_remove,
- },
- .drv.pm = FAN_PM_OPS_PTR,
+struct acpi_fan_fps {
+ u64 control;
+ u64 trip_point;
+ u64 speed;
+ u64 noise_level;
+ u64 power;
+};
+
+struct acpi_fan_fif {
+ u64 revision;
+ u64 fine_grain_ctrl;
+ u64 step_size;
+ u64 low_speed_notification;
+};
+
+struct acpi_fan {
+ bool acpi4;
+ struct acpi_fan_fif fif;
+ struct acpi_fan_fps *fps;
+ int fps_count;
+ struct thermal_cooling_device *cdev;
+};
+
+static struct platform_driver acpi_fan_driver = {
+ .probe = acpi_fan_probe,
+ .remove = acpi_fan_remove,
+ .driver = {
+ .name = "acpi-fan",
+ .acpi_match_table = fan_device_ids,
+ .pm = FAN_PM_OPS_PTR,
+ },
};
/* thermal cooling device callbacks */
static int fan_get_max_state(struct thermal_cooling_device *cdev, unsigned long
*state)
{
- /* ACPI fan device only support two states: ON/OFF */
- *state = 1;
+ struct acpi_device *device = cdev->devdata;
+ struct acpi_fan *fan = acpi_driver_data(device);
+
+ if (fan->acpi4)
+ *state = fan->fps_count - 1;
+ else
+ *state = 1;
return 0;
}
-static int fan_get_cur_state(struct thermal_cooling_device *cdev, unsigned long
- *state)
+static int fan_get_state_acpi4(struct acpi_device *device, unsigned long *state)
+{
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ struct acpi_fan *fan = acpi_driver_data(device);
+ union acpi_object *obj;
+ acpi_status status;
+ int control, i;
+
+ status = acpi_evaluate_object(device->handle, "_FST", NULL, &buffer);
+ if (ACPI_FAILURE(status)) {
+ dev_err(&device->dev, "Get fan state failed\n");
+ return status;
+ }
+
+ obj = buffer.pointer;
+ if (!obj || obj->type != ACPI_TYPE_PACKAGE ||
+ obj->package.count != 3 ||
+ obj->package.elements[1].type != ACPI_TYPE_INTEGER) {
+ dev_err(&device->dev, "Invalid _FST data\n");
+ status = -EINVAL;
+ goto err;
+ }
+
+ control = obj->package.elements[1].integer.value;
+ for (i = 0; i < fan->fps_count; i++) {
+ if (control == fan->fps[i].control)
+ break;
+ }
+ if (i == fan->fps_count) {
+ dev_dbg(&device->dev, "Invalid control value returned\n");
+ status = -EINVAL;
+ goto err;
+ }
+
+ *state = i;
+
+err:
+ kfree(obj);
+ return status;
+}
+
+static int fan_get_state(struct acpi_device *device, unsigned long *state)
{
- struct acpi_device *device = cdev->devdata;
int result;
int acpi_state = ACPI_STATE_D0;
- if (!device)
- return -EINVAL;
-
- result = acpi_bus_update_power(device->handle, &acpi_state);
+ result = acpi_device_update_power(device, &acpi_state);
if (result)
return result;
return 0;
}
-static int
-fan_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state)
+static int fan_get_cur_state(struct thermal_cooling_device *cdev, unsigned long
+ *state)
{
struct acpi_device *device = cdev->devdata;
- int result;
+ struct acpi_fan *fan = acpi_driver_data(device);
- if (!device || (state != 0 && state != 1))
+ if (fan->acpi4)
+ return fan_get_state_acpi4(device, state);
+ else
+ return fan_get_state(device, state);
+}
+
+static int fan_set_state(struct acpi_device *device, unsigned long state)
+{
+ if (state != 0 && state != 1)
return -EINVAL;
- result = acpi_bus_set_power(device->handle,
- state ? ACPI_STATE_D0 : ACPI_STATE_D3_COLD);
+ return acpi_device_set_power(device,
+ state ? ACPI_STATE_D0 : ACPI_STATE_D3_COLD);
+}
- return result;
+static int fan_set_state_acpi4(struct acpi_device *device, unsigned long state)
+{
+ struct acpi_fan *fan = acpi_driver_data(device);
+ acpi_status status;
+
+ if (state >= fan->fps_count)
+ return -EINVAL;
+
+ status = acpi_execute_simple_method(device->handle, "_FSL",
+ fan->fps[state].control);
+ if (ACPI_FAILURE(status)) {
+ dev_dbg(&device->dev, "Failed to set state by _FSL\n");
+ return status;
+ }
+
+ return 0;
}
+static int
+fan_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state)
+{
+ struct acpi_device *device = cdev->devdata;
+ struct acpi_fan *fan = acpi_driver_data(device);
+
+ if (fan->acpi4)
+ return fan_set_state_acpi4(device, state);
+ else
+ return fan_set_state(device, state);
+ }
+
static const struct thermal_cooling_device_ops fan_cooling_ops = {
.get_max_state = fan_get_max_state,
.get_cur_state = fan_get_cur_state,
* --------------------------------------------------------------------------
*/
-static int acpi_fan_add(struct acpi_device *device)
+static bool acpi_fan_is_acpi4(struct acpi_device *device)
{
- int result = 0;
- struct thermal_cooling_device *cdev;
+ return acpi_has_method(device->handle, "_FIF") &&
+ acpi_has_method(device->handle, "_FPS") &&
+ acpi_has_method(device->handle, "_FSL") &&
+ acpi_has_method(device->handle, "_FST");
+}
- if (!device)
- return -EINVAL;
+static int acpi_fan_get_fif(struct acpi_device *device)
+{
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ struct acpi_fan *fan = acpi_driver_data(device);
+ struct acpi_buffer format = { sizeof("NNNN"), "NNNN" };
+ struct acpi_buffer fif = { sizeof(fan->fif), &fan->fif };
+ union acpi_object *obj;
+ acpi_status status;
+
+ status = acpi_evaluate_object(device->handle, "_FIF", NULL, &buffer);
+ if (ACPI_FAILURE(status))
+ return status;
+
+ obj = buffer.pointer;
+ if (!obj || obj->type != ACPI_TYPE_PACKAGE) {
+ dev_err(&device->dev, "Invalid _FIF data\n");
+ status = -EINVAL;
+ goto err;
+ }
- strcpy(acpi_device_name(device), "Fan");
- strcpy(acpi_device_class(device), ACPI_FAN_CLASS);
+ status = acpi_extract_package(obj, &format, &fif);
+ if (ACPI_FAILURE(status)) {
+ dev_err(&device->dev, "Invalid _FIF element\n");
+ status = -EINVAL;
+ }
- result = acpi_bus_update_power(device->handle, NULL);
- if (result) {
- dev_err(&device->dev, "Setting initial power state\n");
- goto end;
+err:
+ kfree(obj);
+ return status;
+}
+
+static int acpi_fan_speed_cmp(const void *a, const void *b)
+{
+ const struct acpi_fan_fps *fps1 = a;
+ const struct acpi_fan_fps *fps2 = b;
+ return fps1->speed - fps2->speed;
+}
+
+static int acpi_fan_get_fps(struct acpi_device *device)
+{
+ struct acpi_fan *fan = acpi_driver_data(device);
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *obj;
+ acpi_status status;
+ int i;
+
+ status = acpi_evaluate_object(device->handle, "_FPS", NULL, &buffer);
+ if (ACPI_FAILURE(status))
+ return status;
+
+ obj = buffer.pointer;
+ if (!obj || obj->type != ACPI_TYPE_PACKAGE || obj->package.count < 2) {
+ dev_err(&device->dev, "Invalid _FPS data\n");
+ status = -EINVAL;
+ goto err;
+ }
+
+ fan->fps_count = obj->package.count - 1; /* minus revision field */
+ fan->fps = devm_kzalloc(&device->dev,
+ fan->fps_count * sizeof(struct acpi_fan_fps),
+ GFP_KERNEL);
+ if (!fan->fps) {
+ dev_err(&device->dev, "Not enough memory\n");
+ status = -ENOMEM;
+ goto err;
+ }
+ for (i = 0; i < fan->fps_count; i++) {
+ struct acpi_buffer format = { sizeof("NNNNN"), "NNNNN" };
+ struct acpi_buffer fps = { sizeof(fan->fps[i]), &fan->fps[i] };
+ status = acpi_extract_package(&obj->package.elements[i + 1],
+ &format, &fps);
+ if (ACPI_FAILURE(status)) {
+ dev_err(&device->dev, "Invalid _FPS element\n");
+ break;
+ }
+ }
+
+ /* sort the state array according to fan speed in increase order */
+ sort(fan->fps, fan->fps_count, sizeof(*fan->fps),
+ acpi_fan_speed_cmp, NULL);
+
+err:
+ kfree(obj);
+ return status;
+}
+
+static int acpi_fan_probe(struct platform_device *pdev)
+{
+ int result = 0;
+ struct thermal_cooling_device *cdev;
+ struct acpi_fan *fan;
+ struct acpi_device *device = ACPI_COMPANION(&pdev->dev);
+
+ fan = devm_kzalloc(&pdev->dev, sizeof(*fan), GFP_KERNEL);
+ if (!fan) {
+ dev_err(&device->dev, "No memory for fan\n");
+ return -ENOMEM;
+ }
+ device->driver_data = fan;
+ platform_set_drvdata(pdev, fan);
+
+ if (acpi_fan_is_acpi4(device)) {
+ if (acpi_fan_get_fif(device) || acpi_fan_get_fps(device))
+ goto end;
+ fan->acpi4 = true;
+ } else {
+ result = acpi_device_update_power(device, NULL);
+ if (result) {
+ dev_err(&device->dev, "Setting initial power state\n");
+ goto end;
+ }
}
cdev = thermal_cooling_device_register("Fan", device,
goto end;
}
- dev_dbg(&device->dev, "registered as cooling_device%d\n", cdev->id);
+ dev_dbg(&pdev->dev, "registered as cooling_device%d\n", cdev->id);
- device->driver_data = cdev;
- result = sysfs_create_link(&device->dev.kobj,
+ fan->cdev = cdev;
+ result = sysfs_create_link(&pdev->dev.kobj,
&cdev->device.kobj,
"thermal_cooling");
if (result)
- dev_err(&device->dev, "Failed to create sysfs link "
- "'thermal_cooling'\n");
+ dev_err(&pdev->dev, "Failed to create sysfs link 'thermal_cooling'\n");
result = sysfs_create_link(&cdev->device.kobj,
- &device->dev.kobj,
+ &pdev->dev.kobj,
"device");
if (result)
- dev_err(&device->dev, "Failed to create sysfs link 'device'\n");
-
- dev_info(&device->dev, "ACPI: %s [%s] (%s)\n",
- acpi_device_name(device), acpi_device_bid(device),
- !device->power.state ? "on" : "off");
+ dev_err(&pdev->dev, "Failed to create sysfs link 'device'\n");
end:
return result;
}
-static int acpi_fan_remove(struct acpi_device *device)
+static int acpi_fan_remove(struct platform_device *pdev)
{
- struct thermal_cooling_device *cdev;
-
- if (!device)
- return -EINVAL;
-
- cdev = acpi_driver_data(device);
- if (!cdev)
- return -EINVAL;
+ struct acpi_fan *fan = platform_get_drvdata(pdev);
- sysfs_remove_link(&device->dev.kobj, "thermal_cooling");
- sysfs_remove_link(&cdev->device.kobj, "device");
- thermal_cooling_device_unregister(cdev);
+ sysfs_remove_link(&pdev->dev.kobj, "thermal_cooling");
+ sysfs_remove_link(&fan->cdev->device.kobj, "device");
+ thermal_cooling_device_unregister(fan->cdev);
return 0;
}
#ifdef CONFIG_PM_SLEEP
static int acpi_fan_suspend(struct device *dev)
{
- if (!dev)
- return -EINVAL;
+ struct acpi_fan *fan = dev_get_drvdata(dev);
+ if (fan->acpi4)
+ return 0;
- acpi_bus_set_power(to_acpi_device(dev)->handle, ACPI_STATE_D0);
+ acpi_device_set_power(ACPI_COMPANION(dev), ACPI_STATE_D0);
return AE_OK;
}
static int acpi_fan_resume(struct device *dev)
{
int result;
+ struct acpi_fan *fan = dev_get_drvdata(dev);
- if (!dev)
- return -EINVAL;
+ if (fan->acpi4)
+ return 0;
- result = acpi_bus_update_power(to_acpi_device(dev)->handle, NULL);
+ result = acpi_device_update_power(ACPI_COMPANION(dev), NULL);
if (result)
dev_err(dev, "Error updating fan power state\n");
}
#endif
-module_acpi_driver(acpi_fan_driver);
+module_platform_driver(acpi_fan_driver);
--- /dev/null
+/*
+ * ACPI support for int340x thermal drivers
+ *
+ * Copyright (C) 2014, Intel Corporation
+ * Authors: Zhang Rui <rui.zhang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/module.h>
+
+#include "internal.h"
+
+#define DO_ENUMERATION 0x01
+static const struct acpi_device_id int340x_thermal_device_ids[] = {
+ {"INT3400", DO_ENUMERATION },
+ {"INT3401"},
+ {"INT3402"},
+ {"INT3403"},
+ {"INT3404"},
+ {"INT3406"},
+ {"INT3407"},
+ {"INT3408"},
+ {"INT3409"},
+ {"INT340A"},
+ {"INT340B"},
+ {""},
+};
+
+static int int340x_thermal_handler_attach(struct acpi_device *adev,
+ const struct acpi_device_id *id)
+{
+#if defined(CONFIG_INT340X_THERMAL) || defined(CONFIG_INT340X_THERMAL_MODULE)
+ if (id->driver_data == DO_ENUMERATION)
+ acpi_create_platform_device(adev);
+#endif
+ return 1;
+}
+
+static struct acpi_scan_handler int340x_thermal_handler = {
+ .ids = int340x_thermal_device_ids,
+ .attach = int340x_thermal_handler_attach,
+};
+
+void __init acpi_int340x_thermal_init(void)
+{
+ acpi_scan_add_handler(&int340x_thermal_handler);
+}
void acpi_processor_init(void);
void acpi_platform_init(void);
void acpi_pnp_init(void);
+void acpi_int340x_thermal_init(void);
int acpi_sysfs_init(void);
void acpi_container_init(void);
void acpi_memory_hotplug_init(void);
int acpi_power_on_resources(struct acpi_device *device, int state);
int acpi_power_transition(struct acpi_device *device, int state);
-int acpi_device_update_power(struct acpi_device *device, int *state_p);
-
int acpi_wakeup_device_init(void);
#ifdef CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC
static inline void suspend_nvs_restore(void) {}
#endif
-/*--------------------------------------------------------------------------
- Platform bus support
- -------------------------------------------------------------------------- */
-struct platform_device;
-
-struct platform_device *acpi_create_platform_device(struct acpi_device *adev);
-
/*--------------------------------------------------------------------------
Video
-------------------------------------------------------------------------- */
return len;
}
+/*
+ * acpi_companion_match() - Can we match via ACPI companion device
+ * @dev: Device in question
+ *
+ * Check if the given device has an ACPI companion and if that companion has
+ * a valid list of PNP IDs, and if the device is the first (primary) physical
+ * device associated with it.
+ *
+ * If multiple physical devices are attached to a single ACPI companion, we need
+ * to be careful. The usage scenario for this kind of relationship is that all
+ * of the physical devices in question use resources provided by the ACPI
+ * companion. A typical case is an MFD device where all the sub-devices share
+ * the parent's ACPI companion. In such cases we can only allow the primary
+ * (first) physical device to be matched with the help of the companion's PNP
+ * IDs.
+ *
+ * Additional physical devices sharing the ACPI companion can still use
+ * resources available from it but they will be matched normally using functions
+ * provided by their bus types (and analogously for their modalias).
+ */
+static bool acpi_companion_match(const struct device *dev)
+{
+ struct acpi_device *adev;
+ bool ret;
+
+ adev = ACPI_COMPANION(dev);
+ if (!adev)
+ return false;
+
+ if (list_empty(&adev->pnp.ids))
+ return false;
+
+ mutex_lock(&adev->physical_node_lock);
+ if (list_empty(&adev->physical_node_list)) {
+ ret = false;
+ } else {
+ const struct acpi_device_physical_node *node;
+
+ node = list_first_entry(&adev->physical_node_list,
+ struct acpi_device_physical_node, node);
+ ret = node->dev == dev;
+ }
+ mutex_unlock(&adev->physical_node_lock);
+
+ return ret;
+}
+
/*
* Creates uevent modalias field for ACPI enumerated devices.
* Because the other buses does not support ACPI HIDs & CIDs.
*/
int acpi_device_uevent_modalias(struct device *dev, struct kobj_uevent_env *env)
{
- struct acpi_device *acpi_dev;
int len;
- acpi_dev = ACPI_COMPANION(dev);
- if (!acpi_dev)
- return -ENODEV;
-
- /* Fall back to bus specific way of modalias exporting */
- if (list_empty(&acpi_dev->pnp.ids))
+ if (!acpi_companion_match(dev))
return -ENODEV;
if (add_uevent_var(env, "MODALIAS="))
return -ENOMEM;
- len = create_modalias(acpi_dev, &env->buf[env->buflen - 1],
+ len = create_modalias(ACPI_COMPANION(dev), &env->buf[env->buflen - 1],
sizeof(env->buf) - env->buflen);
if (len <= 0)
return len;
*/
int acpi_device_modalias(struct device *dev, char *buf, int size)
{
- struct acpi_device *acpi_dev;
int len;
- acpi_dev = ACPI_COMPANION(dev);
- if (!acpi_dev)
+ if (!acpi_companion_match(dev))
return -ENODEV;
- /* Fall back to bus specific way of modalias exporting */
- if (list_empty(&acpi_dev->pnp.ids))
- return -ENODEV;
-
- len = create_modalias(acpi_dev, buf, size -1);
+ len = create_modalias(ACPI_COMPANION(dev), buf, size -1);
if (len <= 0)
return len;
buf[len++] = '\n';
if (!ids || !handle || acpi_bus_get_device(handle, &adev))
return NULL;
+ if (!acpi_companion_match(dev))
+ return NULL;
+
return __acpi_match_device(adev, ids);
}
EXPORT_SYMBOL_GPL(acpi_match_device);
if (ACPI_FAILURE(status))
return;
- wakeup->flags.run_wake = !!(event_status & ACPI_EVENT_FLAG_HANDLE);
+ wakeup->flags.run_wake = !!(event_status & ACPI_EVENT_FLAG_HAS_HANDLER);
}
static void acpi_bus_get_wakeup_device_flags(struct acpi_device *device)
acpi_container_init();
acpi_memory_hotplug_init();
acpi_pnp_init();
+ acpi_int340x_thermal_init();
mutex_lock(&acpi_scan_lock);
/*
if (result)
goto end;
- if (!(status & ACPI_EVENT_FLAG_HANDLE))
+ if (!(status & ACPI_EVENT_FLAG_HAS_HANDLER))
size += sprintf(buf + size, " invalid");
else if (status & ACPI_EVENT_FLAG_ENABLED)
size += sprintf(buf + size, " enabled");
if (result)
goto end;
- if (!(status & ACPI_EVENT_FLAG_HANDLE)) {
+ if (!(status & ACPI_EVENT_FLAG_HAS_HANDLER)) {
printk(KERN_WARNING PREFIX
"Can not change Invalid GPE/Fixed Event status\n");
return -EINVAL;
}
/* sys I/F for generic thermal sysfs support */
-#define KELVIN_TO_MILLICELSIUS(t, off) (((t) - (off)) * 100)
static int thermal_get_temp(struct thermal_zone_device *thermal,
unsigned long *temp)
if (result)
return result;
- *temp = KELVIN_TO_MILLICELSIUS(tz->temperature, tz->kelvin_offset);
+ *temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(tz->temperature,
+ tz->kelvin_offset);
return 0;
}
if (tz->trips.critical.flags.valid) {
if (!trip) {
- *temp = KELVIN_TO_MILLICELSIUS(
+ *temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(
tz->trips.critical.temperature,
tz->kelvin_offset);
return 0;
if (tz->trips.hot.flags.valid) {
if (!trip) {
- *temp = KELVIN_TO_MILLICELSIUS(
+ *temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(
tz->trips.hot.temperature,
tz->kelvin_offset);
return 0;
if (tz->trips.passive.flags.valid) {
if (!trip) {
- *temp = KELVIN_TO_MILLICELSIUS(
+ *temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(
tz->trips.passive.temperature,
tz->kelvin_offset);
return 0;
for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE &&
tz->trips.active[i].flags.valid; i++) {
if (!trip) {
- *temp = KELVIN_TO_MILLICELSIUS(
+ *temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(
tz->trips.active[i].temperature,
tz->kelvin_offset);
return 0;
struct acpi_thermal *tz = thermal->devdata;
if (tz->trips.critical.flags.valid) {
- *temperature = KELVIN_TO_MILLICELSIUS(
+ *temperature = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(
tz->trips.critical.temperature,
tz->kelvin_offset);
return 0;
if (type == THERMAL_TRIP_ACTIVE) {
unsigned long trip_temp;
- unsigned long temp = KELVIN_TO_MILLICELSIUS(tz->temperature,
- tz->kelvin_offset);
+ unsigned long temp = DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(
+ tz->temperature, tz->kelvin_offset);
if (thermal_get_trip_temp(thermal, trip, &trip_temp))
return -EINVAL;
break;
}
break;
+ case ACPI_TYPE_LOCAL_REFERENCE:
+ switch (format_string[i]) {
+ case 'R':
+ size_required += sizeof(void *);
+ tail_offset += sizeof(void *);
+ break;
+ default:
+ printk(KERN_WARNING PREFIX "Invalid package element"
+ " [%d] got reference,"
+ " expecting [%c]\n",
+ i, format_string[i]);
+ return AE_BAD_DATA;
+ break;
+ }
+ break;
case ACPI_TYPE_PACKAGE:
default:
break;
}
break;
-
+ case ACPI_TYPE_LOCAL_REFERENCE:
+ switch (format_string[i]) {
+ case 'R':
+ *(void **)head =
+ (void *)element->reference.handle;
+ head += sizeof(void *);
+ break;
+ default:
+ /* Should never get here */
+ break;
+ }
+ break;
case ACPI_TYPE_PACKAGE:
/* TBD: handle nested packages... */
default:
return true;
for (i = 0; i < video->attached_count; i++) {
- if (video->attached_array[i].bind_info == device)
+ if ((video->attached_array[i].value.int_val & 0xfff) ==
+ (device->device_id & 0xfff))
return true;
}
--- /dev/null
+config ARM_AMBA
+ bool
+
+if ARM_AMBA
+
+config TEGRA_AHB
+ bool "Enable AHB driver for NVIDIA Tegra SoCs"
+ default y if ARCH_TEGRA
+ help
+ Adds AHB configuration functionality for NVIDIA Tegra SoCs,
+ which controls AHB bus master arbitration and some performance
+ parameters (priority, prefetch size).
+
+endif
/* board IDs by feature in alphabetical order */
board_ahci,
board_ahci_ign_iferr,
+ board_ahci_nomsi,
board_ahci_noncq,
board_ahci_nosntf,
board_ahci_yes_fbs,
.udma_mask = ATA_UDMA6,
.port_ops = &ahci_ops,
},
+ [board_ahci_nomsi] = {
+ AHCI_HFLAGS (AHCI_HFLAG_NO_MSI),
+ .flags = AHCI_FLAG_COMMON,
+ .pio_mask = ATA_PIO4,
+ .udma_mask = ATA_UDMA6,
+ .port_ops = &ahci_ops,
+ },
[board_ahci_noncq] = {
AHCI_HFLAGS (AHCI_HFLAG_NO_NCQ),
.flags = AHCI_FLAG_COMMON,
{ PCI_VDEVICE(INTEL, 0x8c87), board_ahci }, /* 9 Series RAID */
{ PCI_VDEVICE(INTEL, 0x8c8e), board_ahci }, /* 9 Series RAID */
{ PCI_VDEVICE(INTEL, 0x8c8f), board_ahci }, /* 9 Series RAID */
+ { PCI_VDEVICE(INTEL, 0x9d03), board_ahci }, /* Sunrise Point-LP AHCI */
+ { PCI_VDEVICE(INTEL, 0x9d05), board_ahci }, /* Sunrise Point-LP RAID */
+ { PCI_VDEVICE(INTEL, 0x9d07), board_ahci }, /* Sunrise Point-LP RAID */
+ { PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H AHCI */
+ { PCI_VDEVICE(INTEL, 0xa103), board_ahci }, /* Sunrise Point-H RAID */
+ { PCI_VDEVICE(INTEL, 0xa105), board_ahci }, /* Sunrise Point-H RAID */
+ { PCI_VDEVICE(INTEL, 0xa107), board_ahci }, /* Sunrise Point-H RAID */
+ { PCI_VDEVICE(INTEL, 0xa10f), board_ahci }, /* Sunrise Point-H RAID */
/* JMicron 360/1/3/5/6, match class to avoid IDE function */
{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
{ PCI_VDEVICE(ASMEDIA, 0x0612), board_ahci }, /* ASM1062 */
/*
- * Samsung SSDs found on some macbooks. NCQ times out.
- * https://bugzilla.kernel.org/show_bug.cgi?id=60731
+ * Samsung SSDs found on some macbooks. NCQ times out if MSI is
+ * enabled. https://bugzilla.kernel.org/show_bug.cgi?id=60731
*/
- { PCI_VDEVICE(SAMSUNG, 0x1600), board_ahci_noncq },
+ { PCI_VDEVICE(SAMSUNG, 0x1600), board_ahci_nomsi },
+ { PCI_VDEVICE(SAMSUNG, 0xa800), board_ahci_nomsi },
/* Enmotus */
{ PCI_DEVICE(0x1c44, 0x8000), board_ahci },
static void ahci_pci_save_initial_config(struct pci_dev *pdev,
struct ahci_host_priv *hpriv)
{
- unsigned int force_port_map = 0;
- unsigned int mask_port_map = 0;
-
if (pdev->vendor == PCI_VENDOR_ID_JMICRON && pdev->device == 0x2361) {
dev_info(&pdev->dev, "JMB361 has only one port\n");
- force_port_map = 1;
+ hpriv->force_port_map = 1;
}
/*
*/
if (hpriv->flags & AHCI_HFLAG_MV_PATA) {
if (pdev->device == 0x6121)
- mask_port_map = 0x3;
+ hpriv->mask_port_map = 0x3;
else
- mask_port_map = 0xf;
+ hpriv->mask_port_map = 0xf;
dev_info(&pdev->dev,
"Disabling your PATA port. Use the boot option 'ahci.marvell_enable=0' to avoid this.\n");
}
}
}
-static void ahci_update_intr_status(struct ata_port *ap)
+static void ahci_port_intr(struct ata_port *ap)
{
void __iomem *port_mmio = ahci_port_base(ap);
- struct ahci_port_priv *pp = ap->private_data;
u32 status;
status = readl(port_mmio + PORT_IRQ_STAT);
writel(status, port_mmio + PORT_IRQ_STAT);
- atomic_or(status, &pp->intr_status);
+ ahci_handle_port_interrupt(ap, port_mmio, status);
}
static irqreturn_t ahci_port_thread_fn(int irq, void *dev_instance)
return IRQ_HANDLED;
}
-irqreturn_t ahci_thread_fn(int irq, void *dev_instance)
-{
- struct ata_host *host = dev_instance;
- struct ahci_host_priv *hpriv = host->private_data;
- u32 irq_masked = hpriv->port_map;
- unsigned int i;
-
- for (i = 0; i < host->n_ports; i++) {
- struct ata_port *ap;
-
- if (!(irq_masked & (1 << i)))
- continue;
-
- ap = host->ports[i];
- if (ap) {
- ahci_port_thread_fn(irq, ap);
- VPRINTK("port %u\n", i);
- } else {
- VPRINTK("port %u (no irq)\n", i);
- if (ata_ratelimit())
- dev_warn(host->dev,
- "interrupt on disabled port %u\n", i);
- }
- }
-
- return IRQ_HANDLED;
-}
-
static irqreturn_t ahci_multi_irqs_intr(int irq, void *dev_instance)
{
struct ata_port *ap = dev_instance;
irq_masked = irq_stat & hpriv->port_map;
+ spin_lock(&host->lock);
+
for (i = 0; i < host->n_ports; i++) {
struct ata_port *ap;
ap = host->ports[i];
if (ap) {
- ahci_update_intr_status(ap);
+ ahci_port_intr(ap);
VPRINTK("port %u\n", i);
} else {
VPRINTK("port %u (no irq)\n", i);
*/
writel(irq_stat, mmio + HOST_IRQ_STAT);
+ spin_unlock(&host->lock);
+
VPRINTK("EXIT\n");
- return handled ? IRQ_WAKE_THREAD : IRQ_NONE;
+ return IRQ_RETVAL(handled);
}
unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
*/
pp->intr_mask = DEF_PORT_IRQ;
- spin_lock_init(&pp->lock);
- ap->lock = &pp->lock;
+ /*
+ * Switch to per-port locking in case each port has its own MSI vector.
+ */
+ if ((hpriv->flags & AHCI_HFLAG_MULTI_MSI)) {
+ spin_lock_init(&pp->lock);
+ ap->lock = &pp->lock;
+ }
ap->private_data = pp;
return rc;
}
-static int ahci_host_activate_single_irq(struct ata_host *host, int irq,
- struct scsi_host_template *sht)
-{
- int i, rc;
-
- rc = ata_host_start(host);
- if (rc)
- return rc;
-
- rc = devm_request_threaded_irq(host->dev, irq, ahci_single_irq_intr,
- ahci_thread_fn, IRQF_SHARED,
- dev_driver_string(host->dev), host);
- if (rc)
- return rc;
-
- for (i = 0; i < host->n_ports; i++)
- ata_port_desc(host->ports[i], "irq %d", irq);
-
- rc = ata_host_register(host, sht);
- if (rc)
- devm_free_irq(host->dev, irq, host);
-
- return rc;
-}
-
/**
* ahci_host_activate - start AHCI host, request IRQs and register it
* @host: target ATA host
if (hpriv->flags & AHCI_HFLAG_MULTI_MSI)
rc = ahci_host_activate_multi_irqs(host, irq, sht);
else
- rc = ahci_host_activate_single_irq(host, irq, sht);
+ rc = ata_host_activate(host, irq, ahci_single_irq_intr,
+ IRQF_SHARED, sht);
return rc;
}
EXPORT_SYMBOL_GPL(ahci_host_activate);
depth = min(sdev->host->can_queue, ata_id_queue_depth(dev->id));
depth = min(ATA_MAX_QUEUE - 1, depth);
- scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth);
+ scsi_change_queue_depth(sdev, depth);
}
blk_queue_flush_queueable(q, false);
* @ap: ATA port to which the device change the queue depth
* @sdev: SCSI device to configure queue depth for
* @queue_depth: new queue depth
- * @reason: calling context
*
* libsas and libata have different approaches for associating a sdev to
* its ata_port.
*
*/
int __ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev,
- int queue_depth, int reason)
+ int queue_depth)
{
struct ata_device *dev;
unsigned long flags;
- if (reason != SCSI_QDEPTH_DEFAULT)
- return -EOPNOTSUPP;
-
if (queue_depth < 1 || queue_depth == sdev->queue_depth)
return sdev->queue_depth;
if (sdev->queue_depth == queue_depth)
return -EINVAL;
- scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, queue_depth);
- return queue_depth;
+ return scsi_change_queue_depth(sdev, queue_depth);
}
/**
* ata_scsi_change_queue_depth - SCSI callback for queue depth config
* @sdev: SCSI device to configure queue depth for
* @queue_depth: new queue depth
- * @reason: calling context
*
* This is libata standard hostt->change_queue_depth callback.
* SCSI will call into this callback when user tries to set queue
* RETURNS:
* Newly configured queue depth.
*/
-int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth,
- int reason)
+int ata_scsi_change_queue_depth(struct scsi_device *sdev, int queue_depth)
{
struct ata_port *ap = ata_shost_to_port(sdev->host);
- return __ata_change_queue_depth(ap, sdev, queue_depth, reason);
+ return __ata_change_queue_depth(ap, sdev, queue_depth);
}
/**
ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap);
break;
- case SERVICE_ACTION_IN:
+ case SERVICE_ACTION_IN_16:
if ((scsicmd[1] & 0x1f) == SAI_READ_CAPACITY_16)
ata_scsi_rbuf_fill(&args, ata_scsiop_read_cap);
else
host_priv->csr_base = csr_base;
irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
- if (irq < 0) {
+ if (!irq) {
dev_err(&ofdev->dev, "invalid irq from platform\n");
goto error_exit_with_cleanup;
}
ata_id_c_string(dev->id, model_num, ATA_ID_PROD, sizeof(model_num));
if (strncmp(model_num, "Maxtor", 6) == 0) {
- ata_scsi_change_queue_depth(sdev, 1, SCSI_QDEPTH_DEFAULT);
+ ata_scsi_change_queue_depth(sdev, 1);
ata_dev_notice(dev, "Disabling SWNCQ mode (depth %x)\n",
sdev->queue_depth);
}
enum sata_rcar_type {
RCAR_GEN1_SATA,
RCAR_GEN2_SATA,
+ RCAR_R8A7790_ES1_SATA,
};
struct sata_rcar_priv {
ap->udma_mask = ATA_UDMA6;
ap->flags |= ATA_FLAG_SATA;
+ if (priv->type == RCAR_R8A7790_ES1_SATA)
+ ap->flags |= ATA_FLAG_NO_DIPM;
+
ioaddr->cmd_addr = base + SDATA_REG;
ioaddr->ctl_addr = base + SSDEVCON_REG;
ioaddr->scr_addr = base + SCRSSTS_REG;
sata_rcar_gen1_phy_init(priv);
break;
case RCAR_GEN2_SATA:
+ case RCAR_R8A7790_ES1_SATA:
sata_rcar_gen2_phy_init(priv);
break;
default:
.compatible = "renesas,sata-r8a7790",
.data = (void *)RCAR_GEN2_SATA
},
+ {
+ .compatible = "renesas,sata-r8a7790-es1",
+ .data = (void *)RCAR_R8A7790_ES1_SATA
+ },
{
.compatible = "renesas,sata-r8a7791",
.data = (void *)RCAR_GEN2_SATA
},
+ {
+ .compatible = "renesas,sata-r8a7793",
+ .data = (void *)RCAR_GEN2_SATA
+ },
{ },
};
MODULE_DEVICE_TABLE(of, sata_rcar_match);
{ "sata_rcar", RCAR_GEN1_SATA }, /* Deprecated by "sata-r8a7779" */
{ "sata-r8a7779", RCAR_GEN1_SATA },
{ "sata-r8a7790", RCAR_GEN2_SATA },
+ { "sata-r8a7790-es1", RCAR_R8A7790_ES1_SATA },
{ "sata-r8a7791", RCAR_GEN2_SATA },
+ { "sata-r8a7793", RCAR_GEN2_SATA },
{ },
};
MODULE_DEVICE_TABLE(platform, sata_rcar_id_table);
card->config_regs = pci_iomap(dev, 0, CONFIG_RAM_SIZE);
if (!card->config_regs) {
dev_warn(&dev->dev, "Failed to ioremap config registers\n");
+ err = -ENOMEM;
goto out_release_regions;
}
card->buffers = pci_iomap(dev, 1, DATA_RAM_SIZE);
if (!card->buffers) {
dev_warn(&dev->dev, "Failed to ioremap data buffers\n");
+ err = -ENOMEM;
goto out_unmap_config;
}
Drivers should "select" this option if they desire to use the
device coredump mechanism.
-config DISABLE_DEV_COREDUMP
- bool "Disable device coredump" if EXPERT
+config ALLOW_DEV_COREDUMP
+ bool "Allow device coredump" if EXPERT
+ default y
help
- Disable the device coredump mechanism despite drivers wanting to
- use it; this allows for more sensitive systems or systems that
- don't want to ever access the information to not have the code,
- nor keep any data.
+ This option controls if the device coredump mechanism is available or
+ not; if disabled, the mechanism will be omitted even if drivers that
+ can use it are enabled.
+ Say 'N' for more sensitive systems or systems that don't want
+ to ever access the information to not have the code, nor keep any
+ data.
- If unsure, say N.
+ If unsure, say Y.
config DEV_COREDUMP
bool
default y if WANT_DEV_COREDUMP
- depends on !DISABLE_DEV_COREDUMP
+ depends on ALLOW_DEV_COREDUMP
config DEBUG_DRIVER
bool "Driver Core verbose debug messages"
return &dir->kobj;
}
+static DEFINE_MUTEX(gdp_mutex);
static struct kobject *get_device_parent(struct device *dev,
struct device *parent)
{
if (dev->class) {
- static DEFINE_MUTEX(gdp_mutex);
struct kobject *kobj = NULL;
struct kobject *parent_kobj;
struct kobject *k;
glue_dir->kset != &dev->class->p->glue_dirs)
return;
+ mutex_lock(&gdp_mutex);
kobject_put(glue_dir);
+ mutex_unlock(&gdp_mutex);
}
static void cleanup_device_parent(struct device *dev)
#undef pr_fmt
#define pr_fmt(fmt) fmt
-static void rmem_cma_device_init(struct reserved_mem *rmem, struct device *dev)
+static int rmem_cma_device_init(struct reserved_mem *rmem, struct device *dev)
{
dev_set_cma_area(dev, rmem->priv);
+ return 0;
}
static void rmem_cma_device_release(struct reserved_mem *rmem,
struct device *dev = pdd->dev;
int ret = 0;
- if (gpd_data->need_restore)
+ if (gpd_data->need_restore > 0)
return 0;
+ /*
+ * If the value of the need_restore flag is still unknown at this point,
+ * we trust that pm_genpd_poweroff() has verified that the device is
+ * already runtime PM suspended.
+ */
+ if (gpd_data->need_restore < 0) {
+ gpd_data->need_restore = 1;
+ return 0;
+ }
+
mutex_unlock(&genpd->lock);
genpd_start_dev(genpd, dev);
mutex_lock(&genpd->lock);
if (!ret)
- gpd_data->need_restore = true;
+ gpd_data->need_restore = 1;
return ret;
}
{
struct generic_pm_domain_data *gpd_data = to_gpd_data(pdd);
struct device *dev = pdd->dev;
- bool need_restore = gpd_data->need_restore;
+ int need_restore = gpd_data->need_restore;
- gpd_data->need_restore = false;
+ gpd_data->need_restore = 0;
mutex_unlock(&genpd->lock);
genpd_start_dev(genpd, dev);
+
+ /*
+ * Call genpd_restore_dev() for recently added devices too (need_restore
+ * is negative then).
+ */
if (need_restore)
genpd_restore_dev(genpd, dev);
static int pm_genpd_runtime_suspend(struct device *dev)
{
struct generic_pm_domain *genpd;
+ struct generic_pm_domain_data *gpd_data;
bool (*stop_ok)(struct device *__dev);
int ret;
return 0;
mutex_lock(&genpd->lock);
+
+ /*
+ * If we have an unknown state of the need_restore flag, it means none
+ * of the runtime PM callbacks has been invoked yet. Let's update the
+ * flag to reflect that the current state is active.
+ */
+ gpd_data = to_gpd_data(dev->power.subsys_data->domain_data);
+ if (gpd_data->need_restore < 0)
+ gpd_data->need_restore = 0;
+
genpd->in_progress++;
pm_genpd_poweroff(genpd);
genpd->in_progress--;
spin_unlock_irq(&dev->power.lock);
if (genpd->attach_dev)
- genpd->attach_dev(dev);
+ genpd->attach_dev(genpd, dev);
mutex_lock(&gpd_data->lock);
gpd_data->base.dev = dev;
list_add_tail(&gpd_data->base.list_node, &genpd->dev_list);
- gpd_data->need_restore = genpd->status == GPD_STATE_POWER_OFF;
+ gpd_data->need_restore = -1;
gpd_data->td.constraint_changed = true;
gpd_data->td.effective_constraint_ns = -1;
mutex_unlock(&gpd_data->lock);
genpd->max_off_time_changed = true;
if (genpd->detach_dev)
- genpd->detach_dev(dev);
+ genpd->detach_dev(genpd, dev);
spin_lock_irq(&dev->power.lock);
psd = dev_to_psd(dev);
if (psd && psd->domain_data)
- to_gpd_data(psd->domain_data)->need_restore = val;
+ to_gpd_data(psd->domain_data)->need_restore = val ? 1 : 0;
spin_unlock_irqrestore(&dev->power.lock, flags);
}
}
mutex_unlock(&dpm_list_mtx);
async_synchronize_full();
+ if (!error)
+ error = async_error;
if (error) {
suspend_stats.failed_suspend_late++;
dpm_save_failed_step(SUSPEND_SUSPEND_LATE);
# subsystems should select the appropriate symbols.
config REGMAP
- default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_MMIO || REGMAP_IRQ)
+ default y if (REGMAP_I2C || REGMAP_SPI || REGMAP_SPMI || REGMAP_AC97 || REGMAP_MMIO || REGMAP_IRQ)
select LZO_COMPRESS
select LZO_DECOMPRESS
select IRQ_DOMAIN if REGMAP_IRQ
bool
+config REGMAP_AC97
+ tristate
+
config REGMAP_I2C
tristate
depends on I2C
obj-$(CONFIG_REGMAP) += regmap.o regcache.o
obj-$(CONFIG_REGMAP) += regcache-rbtree.o regcache-lzo.o regcache-flat.o
obj-$(CONFIG_DEBUG_FS) += regmap-debugfs.o
+obj-$(CONFIG_REGMAP_AC97) += regmap-ac97.o
obj-$(CONFIG_REGMAP_I2C) += regmap-i2c.o
obj-$(CONFIG_REGMAP_SPI) += regmap-spi.o
obj-$(CONFIG_REGMAP_SPMI) += regmap-spmi.o
* published by the Free Software Foundation.
*/
-#include <linux/slab.h>
#include <linux/device.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include "internal.h"
* published by the Free Software Foundation.
*/
-#include <linux/slab.h>
#include <linux/device.h>
#include <linux/lzo.h>
+#include <linux/slab.h>
#include "internal.h"
* published by the Free Software Foundation.
*/
-#include <linux/slab.h>
-#include <linux/device.h>
#include <linux/debugfs.h>
+#include <linux/device.h>
#include <linux/rbtree.h>
#include <linux/seq_file.h>
+#include <linux/slab.h>
#include "internal.h"
* published by the Free Software Foundation.
*/
-#include <linux/slab.h>
-#include <linux/export.h>
-#include <linux/device.h>
-#include <trace/events/regmap.h>
#include <linux/bsearch.h>
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/slab.h>
#include <linux/sort.h>
+#include <trace/events/regmap.h>
#include "internal.h"
if (!map->num_reg_defaults_raw)
return -EINVAL;
+ /* calculate the size of reg_defaults */
+ for (count = 0, i = 0; i < map->num_reg_defaults_raw; i++)
+ if (!regmap_volatile(map, i * map->reg_stride))
+ count++;
+
+ /* all registers are volatile, so just bypass */
+ if (!count) {
+ map->cache_bypass = true;
+ return 0;
+ }
+
+ map->num_reg_defaults = count;
+ map->reg_defaults = kmalloc_array(count, sizeof(struct reg_default),
+ GFP_KERNEL);
+ if (!map->reg_defaults)
+ return -ENOMEM;
+
if (!map->reg_defaults_raw) {
u32 cache_bypass = map->cache_bypass;
dev_warn(map->dev, "No cache defaults, reading back from HW\n");
/* Bypass the cache access till data read from HW*/
map->cache_bypass = 1;
tmp_buf = kmalloc(map->cache_size_raw, GFP_KERNEL);
- if (!tmp_buf)
- return -EINVAL;
+ if (!tmp_buf) {
+ ret = -ENOMEM;
+ goto err_free;
+ }
ret = regmap_raw_read(map, 0, tmp_buf,
map->num_reg_defaults_raw);
map->cache_bypass = cache_bypass;
- if (ret < 0) {
- kfree(tmp_buf);
- return ret;
- }
+ if (ret < 0)
+ goto err_cache_free;
+
map->reg_defaults_raw = tmp_buf;
map->cache_free = 1;
}
- /* calculate the size of reg_defaults */
- for (count = 0, i = 0; i < map->num_reg_defaults_raw; i++) {
- val = regcache_get_val(map, map->reg_defaults_raw, i);
- if (regmap_volatile(map, i * map->reg_stride))
- continue;
- count++;
- }
-
- map->reg_defaults = kmalloc(count * sizeof(struct reg_default),
- GFP_KERNEL);
- if (!map->reg_defaults) {
- ret = -ENOMEM;
- goto err_free;
- }
-
/* fill the reg_defaults */
- map->num_reg_defaults = count;
for (i = 0, j = 0; i < map->num_reg_defaults_raw; i++) {
- val = regcache_get_val(map, map->reg_defaults_raw, i);
if (regmap_volatile(map, i * map->reg_stride))
continue;
+ val = regcache_get_val(map, map->reg_defaults_raw, i);
map->reg_defaults[j].reg = i * map->reg_stride;
map->reg_defaults[j].def = val;
j++;
return 0;
+err_cache_free:
+ kfree(tmp_buf);
err_free:
- if (map->cache_free)
- kfree(map->reg_defaults_raw);
+ kfree(map->reg_defaults);
return ret;
}
ret = regcache_hw_init(map);
if (ret < 0)
return ret;
+ if (map->cache_bypass)
+ return 0;
}
if (!map->max_register)
--- /dev/null
+/*
+ * Register map access API - AC'97 support
+ *
+ * Copyright 2013 Linaro Ltd. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#include <sound/ac97_codec.h>
+
+bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case AC97_RESET:
+ case AC97_POWERDOWN:
+ case AC97_INT_PAGING:
+ case AC97_EXTENDED_ID:
+ case AC97_EXTENDED_STATUS:
+ case AC97_EXTENDED_MID:
+ case AC97_EXTENDED_MSTATUS:
+ case AC97_GPIO_STATUS:
+ case AC97_MISC_AFE:
+ case AC97_VENDOR_ID1:
+ case AC97_VENDOR_ID2:
+ case AC97_CODEC_CLASS_REV:
+ case AC97_PCI_SVID:
+ case AC97_PCI_SID:
+ case AC97_FUNC_SELECT:
+ case AC97_FUNC_INFO:
+ case AC97_SENSE_INFO:
+ return true;
+ default:
+ return false;
+ }
+}
+EXPORT_SYMBOL_GPL(regmap_ac97_default_volatile);
+
+static int regmap_ac97_reg_read(void *context, unsigned int reg,
+ unsigned int *val)
+{
+ struct snd_ac97 *ac97 = context;
+
+ *val = ac97->bus->ops->read(ac97, reg);
+
+ return 0;
+}
+
+static int regmap_ac97_reg_write(void *context, unsigned int reg,
+ unsigned int val)
+{
+ struct snd_ac97 *ac97 = context;
+
+ ac97->bus->ops->write(ac97, reg, val);
+
+ return 0;
+}
+
+static const struct regmap_bus ac97_regmap_bus = {
+ .reg_write = regmap_ac97_reg_write,
+ .reg_read = regmap_ac97_reg_read,
+};
+
+/**
+ * regmap_init_ac97(): Initialise AC'97 register map
+ *
+ * @ac97: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer to
+ * a struct regmap.
+ */
+struct regmap *regmap_init_ac97(struct snd_ac97 *ac97,
+ const struct regmap_config *config)
+{
+ return regmap_init(&ac97->dev, &ac97_regmap_bus, ac97, config);
+}
+EXPORT_SYMBOL_GPL(regmap_init_ac97);
+
+/**
+ * devm_regmap_init_ac97(): Initialise AC'97 register map
+ *
+ * @ac97: Device that will be interacted with
+ * @config: Configuration for register map
+ *
+ * The return value will be an ERR_PTR() on error or a valid pointer
+ * to a struct regmap. The regmap will be automatically freed by the
+ * device management code.
+ */
+struct regmap *devm_regmap_init_ac97(struct snd_ac97 *ac97,
+ const struct regmap_config *config)
+{
+ return devm_regmap_init(&ac97->dev, &ac97_regmap_bus, ac97, config);
+}
+EXPORT_SYMBOL_GPL(devm_regmap_init_ac97);
+
+MODULE_LICENSE("GPL v2");
static const struct pci_device_id bcma_pci_bridge_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4313) },
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43224) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43224) }, /* 0xa8d8 */
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a9) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43aa) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43227) }, /* 0xA8DB */
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43227) }, /* 0xa8db, BCM43217 (sic!) */
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43228) }, /* 0xa8dc */
{ 0, },
};
MODULE_DEVICE_TABLE(pci, bcma_pci_bridge_tbl);
return false;
}
-#ifdef CONFIG_OF
+#if defined(CONFIG_OF) && defined(CONFIG_OF_ADDRESS)
static struct device_node *bcma_of_find_child_device(struct platform_device *parent,
struct bcma_device *core)
{
ret = setup_commands(nq);
if (ret)
- goto err_queue;
+ return ret;
nullb->nr_queues++;
}
-
return 0;
-err_queue:
- cleanup_queues(nullb);
- return ret;
}
static int null_add_dev(void)
goto out_cleanup_queues;
}
blk_queue_make_request(nullb->q, null_queue_bio);
- init_driver_queues(nullb);
+ rv = init_driver_queues(nullb);
+ if (rv)
+ goto out_cleanup_blk_queue;
} else {
nullb->q = blk_init_queue_node(null_request_fn, &nullb->lock, home_node);
if (!nullb->q) {
}
blk_queue_prep_rq(nullb->q, null_rq_prep_fn);
blk_queue_softirq_done(nullb->q, null_softirq_done_fn);
- init_driver_queues(nullb);
+ rv = init_driver_queues(nullb);
+ if (rv)
+ goto out_cleanup_blk_queue;
}
nullb->q->queuedata = nullb;
(GET_U32_FROM_CDB(cdb, READ_CAP_16_CDB_ALLOC_LENGTH_OFFSET))
#define IS_READ_CAP_16(cdb) \
-((cdb[0] == SERVICE_ACTION_IN && cdb[1] == SAI_READ_CAPACITY_16) ? 1 : 0)
+((cdb[0] == SERVICE_ACTION_IN_16 && cdb[1] == SAI_READ_CAPACITY_16) ? 1 : 0)
/* Request Sense Helper Macros */
#define GET_REQUEST_SENSE_ALLOC_LENGTH(cdb) \
case READ_CAPACITY:
retcode = nvme_trans_read_capacity(ns, hdr, cmd);
break;
- case SERVICE_ACTION_IN:
+ case SERVICE_ACTION_IN_16:
if (IS_READ_CAP_16(cmd))
retcode = nvme_trans_read_capacity(ns, hdr, cmd);
else
struct list_head rq_queue; /* incoming rq queue */
spinlock_t lock; /* queue, flags, open_count */
- struct workqueue_struct *rq_wq;
struct work_struct rq_work;
struct rbd_image_header header;
static int rbd_major;
static DEFINE_IDA(rbd_dev_id_ida);
+static struct workqueue_struct *rbd_wq;
+
/*
* Default to false for now, as single-major requires >= 0.75 version of
* userspace rbd utility.
}
if (queued)
- queue_work(rbd_dev->rq_wq, &rbd_dev->rq_work);
+ queue_work(rbd_wq, &rbd_dev->rq_work);
}
/*
page_count = (u32) calc_pages_for(offset, length);
pages = ceph_alloc_page_vector(page_count, GFP_KERNEL);
if (IS_ERR(pages))
- ret = PTR_ERR(pages);
+ return PTR_ERR(pages);
ret = -ENOMEM;
obj_request = rbd_obj_request_create(object_name, offset, length,
set_capacity(rbd_dev->disk, rbd_dev->mapping.size / SECTOR_SIZE);
set_disk_ro(rbd_dev->disk, rbd_dev->mapping.read_only);
- rbd_dev->rq_wq = alloc_workqueue("%s", WQ_MEM_RECLAIM, 0,
- rbd_dev->disk->disk_name);
- if (!rbd_dev->rq_wq) {
- ret = -ENOMEM;
- goto err_out_mapping;
- }
-
ret = rbd_bus_add_dev(rbd_dev);
if (ret)
- goto err_out_workqueue;
+ goto err_out_mapping;
/* Everything's ready. Announce the disk to the world. */
return ret;
-err_out_workqueue:
- destroy_workqueue(rbd_dev->rq_wq);
- rbd_dev->rq_wq = NULL;
err_out_mapping:
rbd_dev_mapping_clear(rbd_dev);
err_out_disk:
{
struct rbd_device *rbd_dev = dev_to_rbd_dev(dev);
- destroy_workqueue(rbd_dev->rq_wq);
rbd_free_disk(rbd_dev);
clear_bit(RBD_DEV_FLAG_EXISTS, &rbd_dev->flags);
rbd_dev_mapping_clear(rbd_dev);
if (rc)
return rc;
+ /*
+ * The number of active work items is limited by the number of
+ * rbd devices, so leave @max_active at default.
+ */
+ rbd_wq = alloc_workqueue(RBD_DRV_NAME, WQ_MEM_RECLAIM, 0);
+ if (!rbd_wq) {
+ rc = -ENOMEM;
+ goto err_out_slab;
+ }
+
if (single_major) {
rbd_major = register_blkdev(0, RBD_DRV_NAME);
if (rbd_major < 0) {
rc = rbd_major;
- goto err_out_slab;
+ goto err_out_wq;
}
}
err_out_blkdev:
if (single_major)
unregister_blkdev(rbd_major, RBD_DRV_NAME);
+err_out_wq:
+ destroy_workqueue(rbd_wq);
err_out_slab:
rbd_slab_exit();
return rc;
rbd_sysfs_cleanup();
if (single_major)
unregister_blkdev(rbd_major, RBD_DRV_NAME);
+ destroy_workqueue(rbd_wq);
rbd_slab_exit();
}
u8 vdisk_mtype;
char disk_name[32];
-
- struct vio_disk_vtoc label;
};
static inline struct vdc_port *to_vdc_port(struct vio_driver_state *vio)
if (comp.err)
return comp.err;
- err = generic_request(port, VD_OP_GET_VTOC,
- &port->label, sizeof(port->label));
- if (err < 0) {
- printk(KERN_ERR PFX "VD_OP_GET_VTOC returns error %d\n", err);
- return err;
- }
-
if (vdc_version_supported(port, 1, 1)) {
/* vdisk_size should be set during the handshake, if it wasn't
* then the underlying disk is reserved by another system
{
u64 val = 0;
struct zram *zram = dev_to_zram(dev);
- struct zram_meta *meta = zram->meta;
down_read(&zram->init_lock);
- if (init_done(zram))
+ if (init_done(zram)) {
+ struct zram_meta *meta = zram->meta;
val = zs_get_total_pages(meta->mem_pool);
+ }
up_read(&zram->init_lock);
return scnprintf(buf, PAGE_SIZE, "%llu\n", val << PAGE_SHIFT);
int err;
unsigned long val;
struct zram *zram = dev_to_zram(dev);
- struct zram_meta *meta = zram->meta;
err = kstrtoul(buf, 10, &val);
if (err || val != 0)
return -EINVAL;
down_read(&zram->init_lock);
- if (init_done(zram))
+ if (init_done(zram)) {
+ struct zram_meta *meta = zram->meta;
atomic_long_set(&zram->stats.max_used_pages,
zs_get_total_pages(meta->mem_pool));
+ }
up_read(&zram->init_lock);
return len;
}
if (page_zero_filled(uncmem)) {
- kunmap_atomic(user_mem);
+ if (user_mem)
+ kunmap_atomic(user_mem);
/* Free memory associated with this sector now. */
bit_spin_lock(ZRAM_ACCESS, &meta->table[index].value);
zram_free_page(zram, index);
config BRCMSTB_GISB_ARB
bool "Broadcom STB GISB bus arbiter"
- depends on ARM
+ depends on ARM || MIPS
help
Driver for the Broadcom Set Top Box System-on-a-chip internal bus
arbiter. This driver provides timeout and target abort error handling
#include <linux/arm-cci.h>
#include <linux/io.h>
+#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
+#include <linux/perf_event.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <asm/cacheflush.h>
-#include <asm/irq_regs.h>
-#include <asm/pmu.h>
#include <asm/smp_plat.h>
#define DRIVER_NAME "CCI-400"
#define CCI_PMU_CNTR_BASE(idx) ((idx) * SZ_4K)
+#define CCI_PMU_CNTR_MASK ((1ULL << 32) -1)
+
/*
* Instead of an event id to monitor CCI cycles, a dedicated counter is
* provided. Use 0xff to represent CCI cycles and hope that no future revisions
[CCI_REV_R1] = "CCI_400_r1",
};
-struct cci_pmu_drv_data {
+struct cci_pmu_hw_events {
+ struct perf_event *events[CCI_PMU_MAX_HW_EVENTS];
+ unsigned long used_mask[BITS_TO_LONGS(CCI_PMU_MAX_HW_EVENTS)];
+ raw_spinlock_t pmu_lock;
+};
+
+struct cci_pmu {
void __iomem *base;
- struct arm_pmu *cci_pmu;
+ struct pmu pmu;
int nr_irqs;
int irqs[CCI_PMU_MAX_HW_EVENTS];
unsigned long active_irqs;
- struct perf_event *events[CCI_PMU_MAX_HW_EVENTS];
- unsigned long used_mask[BITS_TO_LONGS(CCI_PMU_MAX_HW_EVENTS)];
struct pmu_port_event_ranges *port_ranges;
- struct pmu_hw_events hw_events;
+ struct cci_pmu_hw_events hw_events;
+ struct platform_device *plat_device;
+ int num_events;
+ atomic_t active_events;
+ struct mutex reserve_mutex;
+ cpumask_t cpus;
};
-static struct cci_pmu_drv_data *pmu;
+static struct cci_pmu *pmu;
+
+#define to_cci_pmu(c) (container_of(c, struct cci_pmu, pmu))
static bool is_duplicate_irq(int irq, int *irqs, int nr_irqs)
{
return -ENOENT;
}
-static int pmu_is_valid_counter(struct arm_pmu *cci_pmu, int idx)
+static int pmu_is_valid_counter(struct cci_pmu *cci_pmu, int idx)
{
return CCI_PMU_CYCLE_CNTR_IDX <= idx &&
idx <= CCI_PMU_CNTR_LAST(cci_pmu);
return n_cnts + 1;
}
-static struct pmu_hw_events *pmu_get_hw_events(void)
-{
- return &pmu->hw_events;
-}
-
-static int pmu_get_event_idx(struct pmu_hw_events *hw, struct perf_event *event)
+static int pmu_get_event_idx(struct cci_pmu_hw_events *hw, struct perf_event *event)
{
- struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
+ struct cci_pmu *cci_pmu = to_cci_pmu(event->pmu);
struct hw_perf_event *hw_event = &event->hw;
unsigned long cci_event = hw_event->config_base & CCI_PMU_EVENT_MASK;
int idx;
return mapping;
}
-static int pmu_request_irq(struct arm_pmu *cci_pmu, irq_handler_t handler)
+static int pmu_request_irq(struct cci_pmu *cci_pmu, irq_handler_t handler)
{
int i;
struct platform_device *pmu_device = cci_pmu->plat_device;
return 0;
}
+static void pmu_free_irq(struct cci_pmu *cci_pmu)
+{
+ int i;
+
+ for (i = 0; i < pmu->nr_irqs; i++) {
+ if (!test_and_clear_bit(i, &pmu->active_irqs))
+ continue;
+
+ free_irq(pmu->irqs[i], cci_pmu);
+ }
+}
+
+static u32 pmu_read_counter(struct perf_event *event)
+{
+ struct cci_pmu *cci_pmu = to_cci_pmu(event->pmu);
+ struct hw_perf_event *hw_counter = &event->hw;
+ int idx = hw_counter->idx;
+ u32 value;
+
+ if (unlikely(!pmu_is_valid_counter(cci_pmu, idx))) {
+ dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
+ return 0;
+ }
+ value = pmu_read_register(idx, CCI_PMU_CNTR);
+
+ return value;
+}
+
+static void pmu_write_counter(struct perf_event *event, u32 value)
+{
+ struct cci_pmu *cci_pmu = to_cci_pmu(event->pmu);
+ struct hw_perf_event *hw_counter = &event->hw;
+ int idx = hw_counter->idx;
+
+ if (unlikely(!pmu_is_valid_counter(cci_pmu, idx)))
+ dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
+ else
+ pmu_write_register(value, idx, CCI_PMU_CNTR);
+}
+
+static u64 pmu_event_update(struct perf_event *event)
+{
+ struct hw_perf_event *hwc = &event->hw;
+ u64 delta, prev_raw_count, new_raw_count;
+
+ do {
+ prev_raw_count = local64_read(&hwc->prev_count);
+ new_raw_count = pmu_read_counter(event);
+ } while (local64_cmpxchg(&hwc->prev_count, prev_raw_count,
+ new_raw_count) != prev_raw_count);
+
+ delta = (new_raw_count - prev_raw_count) & CCI_PMU_CNTR_MASK;
+
+ local64_add(delta, &event->count);
+
+ return new_raw_count;
+}
+
+static void pmu_read(struct perf_event *event)
+{
+ pmu_event_update(event);
+}
+
+void pmu_event_set_period(struct perf_event *event)
+{
+ struct hw_perf_event *hwc = &event->hw;
+ /*
+ * The CCI PMU counters have a period of 2^32. To account for the
+ * possiblity of extreme interrupt latency we program for a period of
+ * half that. Hopefully we can handle the interrupt before another 2^31
+ * events occur and the counter overtakes its previous value.
+ */
+ u64 val = 1ULL << 31;
+ local64_set(&hwc->prev_count, val);
+ pmu_write_counter(event, val);
+}
+
static irqreturn_t pmu_handle_irq(int irq_num, void *dev)
{
unsigned long flags;
- struct arm_pmu *cci_pmu = (struct arm_pmu *)dev;
- struct pmu_hw_events *events = cci_pmu->get_hw_events();
- struct perf_sample_data data;
- struct pt_regs *regs;
+ struct cci_pmu *cci_pmu = dev;
+ struct cci_pmu_hw_events *events = &pmu->hw_events;
int idx, handled = IRQ_NONE;
raw_spin_lock_irqsave(&events->pmu_lock, flags);
- regs = get_irq_regs();
/*
* Iterate over counters and update the corresponding perf events.
* This should work regardless of whether we have per-counter overflow
pmu_write_register(CCI_PMU_OVRFLW_FLAG, idx, CCI_PMU_OVRFLW);
+ pmu_event_update(event);
+ pmu_event_set_period(event);
handled = IRQ_HANDLED;
-
- armpmu_event_update(event);
- perf_sample_data_init(&data, 0, hw_counter->last_period);
- if (!armpmu_event_set_period(event))
- continue;
-
- if (perf_event_overflow(event, &data, regs))
- cci_pmu->disable(event);
}
raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
return IRQ_RETVAL(handled);
}
-static void pmu_free_irq(struct arm_pmu *cci_pmu)
+static int cci_pmu_get_hw(struct cci_pmu *cci_pmu)
{
- int i;
+ int ret = pmu_request_irq(cci_pmu, pmu_handle_irq);
+ if (ret) {
+ pmu_free_irq(cci_pmu);
+ return ret;
+ }
+ return 0;
+}
- for (i = 0; i < pmu->nr_irqs; i++) {
- if (!test_and_clear_bit(i, &pmu->active_irqs))
- continue;
+static void cci_pmu_put_hw(struct cci_pmu *cci_pmu)
+{
+ pmu_free_irq(cci_pmu);
+}
- free_irq(pmu->irqs[i], cci_pmu);
+static void hw_perf_event_destroy(struct perf_event *event)
+{
+ struct cci_pmu *cci_pmu = to_cci_pmu(event->pmu);
+ atomic_t *active_events = &cci_pmu->active_events;
+ struct mutex *reserve_mutex = &cci_pmu->reserve_mutex;
+
+ if (atomic_dec_and_mutex_lock(active_events, reserve_mutex)) {
+ cci_pmu_put_hw(cci_pmu);
+ mutex_unlock(reserve_mutex);
}
}
-static void pmu_enable_event(struct perf_event *event)
+static void cci_pmu_enable(struct pmu *pmu)
{
+ struct cci_pmu *cci_pmu = to_cci_pmu(pmu);
+ struct cci_pmu_hw_events *hw_events = &cci_pmu->hw_events;
+ int enabled = bitmap_weight(hw_events->used_mask, cci_pmu->num_events);
unsigned long flags;
- struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
- struct pmu_hw_events *events = cci_pmu->get_hw_events();
- struct hw_perf_event *hw_counter = &event->hw;
- int idx = hw_counter->idx;
+ u32 val;
+
+ if (!enabled)
+ return;
+
+ raw_spin_lock_irqsave(&hw_events->pmu_lock, flags);
+
+ /* Enable all the PMU counters. */
+ val = readl_relaxed(cci_ctrl_base + CCI_PMCR) | CCI_PMCR_CEN;
+ writel(val, cci_ctrl_base + CCI_PMCR);
+ raw_spin_unlock_irqrestore(&hw_events->pmu_lock, flags);
+
+}
+
+static void cci_pmu_disable(struct pmu *pmu)
+{
+ struct cci_pmu *cci_pmu = to_cci_pmu(pmu);
+ struct cci_pmu_hw_events *hw_events = &cci_pmu->hw_events;
+ unsigned long flags;
+ u32 val;
+
+ raw_spin_lock_irqsave(&hw_events->pmu_lock, flags);
+
+ /* Disable all the PMU counters. */
+ val = readl_relaxed(cci_ctrl_base + CCI_PMCR) & ~CCI_PMCR_CEN;
+ writel(val, cci_ctrl_base + CCI_PMCR);
+ raw_spin_unlock_irqrestore(&hw_events->pmu_lock, flags);
+}
+
+static void cci_pmu_start(struct perf_event *event, int pmu_flags)
+{
+ struct cci_pmu *cci_pmu = to_cci_pmu(event->pmu);
+ struct cci_pmu_hw_events *hw_events = &cci_pmu->hw_events;
+ struct hw_perf_event *hwc = &event->hw;
+ int idx = hwc->idx;
+ unsigned long flags;
+
+ /*
+ * To handle interrupt latency, we always reprogram the period
+ * regardlesss of PERF_EF_RELOAD.
+ */
+ if (pmu_flags & PERF_EF_RELOAD)
+ WARN_ON_ONCE(!(hwc->state & PERF_HES_UPTODATE));
+
+ hwc->state = 0;
if (unlikely(!pmu_is_valid_counter(cci_pmu, idx))) {
dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
return;
}
- raw_spin_lock_irqsave(&events->pmu_lock, flags);
+ raw_spin_lock_irqsave(&hw_events->pmu_lock, flags);
/* Configure the event to count, unless you are counting cycles */
if (idx != CCI_PMU_CYCLE_CNTR_IDX)
- pmu_set_event(idx, hw_counter->config_base);
+ pmu_set_event(idx, hwc->config_base);
+ pmu_event_set_period(event);
pmu_enable_counter(idx);
- raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+ raw_spin_unlock_irqrestore(&hw_events->pmu_lock, flags);
}
-static void pmu_disable_event(struct perf_event *event)
+static void cci_pmu_stop(struct perf_event *event, int pmu_flags)
{
- struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
- struct hw_perf_event *hw_counter = &event->hw;
- int idx = hw_counter->idx;
+ struct cci_pmu *cci_pmu = to_cci_pmu(event->pmu);
+ struct hw_perf_event *hwc = &event->hw;
+ int idx = hwc->idx;
+
+ if (hwc->state & PERF_HES_STOPPED)
+ return;
if (unlikely(!pmu_is_valid_counter(cci_pmu, idx))) {
dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
return;
}
+ /*
+ * We always reprogram the counter, so ignore PERF_EF_UPDATE. See
+ * cci_pmu_start()
+ */
pmu_disable_counter(idx);
+ pmu_event_update(event);
+ hwc->state |= PERF_HES_STOPPED | PERF_HES_UPTODATE;
}
-static void pmu_start(struct arm_pmu *cci_pmu)
+static int cci_pmu_add(struct perf_event *event, int flags)
{
- u32 val;
- unsigned long flags;
- struct pmu_hw_events *events = cci_pmu->get_hw_events();
+ struct cci_pmu *cci_pmu = to_cci_pmu(event->pmu);
+ struct cci_pmu_hw_events *hw_events = &cci_pmu->hw_events;
+ struct hw_perf_event *hwc = &event->hw;
+ int idx;
+ int err = 0;
- raw_spin_lock_irqsave(&events->pmu_lock, flags);
+ perf_pmu_disable(event->pmu);
- /* Enable all the PMU counters. */
- val = readl_relaxed(cci_ctrl_base + CCI_PMCR) | CCI_PMCR_CEN;
- writel(val, cci_ctrl_base + CCI_PMCR);
+ /* If we don't have a space for the counter then finish early. */
+ idx = pmu_get_event_idx(hw_events, event);
+ if (idx < 0) {
+ err = idx;
+ goto out;
+ }
- raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+ event->hw.idx = idx;
+ hw_events->events[idx] = event;
+
+ hwc->state = PERF_HES_STOPPED | PERF_HES_UPTODATE;
+ if (flags & PERF_EF_START)
+ cci_pmu_start(event, PERF_EF_RELOAD);
+
+ /* Propagate our changes to the userspace mapping. */
+ perf_event_update_userpage(event);
+
+out:
+ perf_pmu_enable(event->pmu);
+ return err;
}
-static void pmu_stop(struct arm_pmu *cci_pmu)
+static void cci_pmu_del(struct perf_event *event, int flags)
{
- u32 val;
- unsigned long flags;
- struct pmu_hw_events *events = cci_pmu->get_hw_events();
+ struct cci_pmu *cci_pmu = to_cci_pmu(event->pmu);
+ struct cci_pmu_hw_events *hw_events = &cci_pmu->hw_events;
+ struct hw_perf_event *hwc = &event->hw;
+ int idx = hwc->idx;
- raw_spin_lock_irqsave(&events->pmu_lock, flags);
+ cci_pmu_stop(event, PERF_EF_UPDATE);
+ hw_events->events[idx] = NULL;
+ clear_bit(idx, hw_events->used_mask);
- /* Disable all the PMU counters. */
- val = readl_relaxed(cci_ctrl_base + CCI_PMCR) & ~CCI_PMCR_CEN;
- writel(val, cci_ctrl_base + CCI_PMCR);
+ perf_event_update_userpage(event);
+}
- raw_spin_unlock_irqrestore(&events->pmu_lock, flags);
+static int
+validate_event(struct cci_pmu_hw_events *hw_events,
+ struct perf_event *event)
+{
+ if (is_software_event(event))
+ return 1;
+
+ if (event->state < PERF_EVENT_STATE_OFF)
+ return 1;
+
+ if (event->state == PERF_EVENT_STATE_OFF && !event->attr.enable_on_exec)
+ return 1;
+
+ return pmu_get_event_idx(hw_events, event) >= 0;
}
-static u32 pmu_read_counter(struct perf_event *event)
+static int
+validate_group(struct perf_event *event)
{
- struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
- struct hw_perf_event *hw_counter = &event->hw;
- int idx = hw_counter->idx;
- u32 value;
+ struct perf_event *sibling, *leader = event->group_leader;
+ struct cci_pmu_hw_events fake_pmu = {
+ /*
+ * Initialise the fake PMU. We only need to populate the
+ * used_mask for the purposes of validation.
+ */
+ .used_mask = CPU_BITS_NONE,
+ };
- if (unlikely(!pmu_is_valid_counter(cci_pmu, idx))) {
- dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
- return 0;
+ if (!validate_event(&fake_pmu, leader))
+ return -EINVAL;
+
+ list_for_each_entry(sibling, &leader->sibling_list, group_entry) {
+ if (!validate_event(&fake_pmu, sibling))
+ return -EINVAL;
}
- value = pmu_read_register(idx, CCI_PMU_CNTR);
- return value;
+ if (!validate_event(&fake_pmu, event))
+ return -EINVAL;
+
+ return 0;
}
-static void pmu_write_counter(struct perf_event *event, u32 value)
+static int
+__hw_perf_event_init(struct perf_event *event)
{
- struct arm_pmu *cci_pmu = to_arm_pmu(event->pmu);
- struct hw_perf_event *hw_counter = &event->hw;
- int idx = hw_counter->idx;
+ struct hw_perf_event *hwc = &event->hw;
+ int mapping;
- if (unlikely(!pmu_is_valid_counter(cci_pmu, idx)))
- dev_err(&cci_pmu->plat_device->dev, "Invalid CCI PMU counter %d\n", idx);
- else
- pmu_write_register(value, idx, CCI_PMU_CNTR);
+ mapping = pmu_map_event(event);
+
+ if (mapping < 0) {
+ pr_debug("event %x:%llx not supported\n", event->attr.type,
+ event->attr.config);
+ return mapping;
+ }
+
+ /*
+ * We don't assign an index until we actually place the event onto
+ * hardware. Use -1 to signify that we haven't decided where to put it
+ * yet.
+ */
+ hwc->idx = -1;
+ hwc->config_base = 0;
+ hwc->config = 0;
+ hwc->event_base = 0;
+
+ /*
+ * Store the event encoding into the config_base field.
+ */
+ hwc->config_base |= (unsigned long)mapping;
+
+ /*
+ * Limit the sample_period to half of the counter width. That way, the
+ * new counter value is far less likely to overtake the previous one
+ * unless you have some serious IRQ latency issues.
+ */
+ hwc->sample_period = CCI_PMU_CNTR_MASK >> 1;
+ hwc->last_period = hwc->sample_period;
+ local64_set(&hwc->period_left, hwc->sample_period);
+
+ if (event->group_leader != event) {
+ if (validate_group(event) != 0)
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static int cci_pmu_event_init(struct perf_event *event)
+{
+ struct cci_pmu *cci_pmu = to_cci_pmu(event->pmu);
+ atomic_t *active_events = &cci_pmu->active_events;
+ int err = 0;
+ int cpu;
+
+ if (event->attr.type != event->pmu->type)
+ return -ENOENT;
+
+ /* Shared by all CPUs, no meaningful state to sample */
+ if (is_sampling_event(event) || event->attach_state & PERF_ATTACH_TASK)
+ return -EOPNOTSUPP;
+
+ /* We have no filtering of any kind */
+ if (event->attr.exclude_user ||
+ event->attr.exclude_kernel ||
+ event->attr.exclude_hv ||
+ event->attr.exclude_idle ||
+ event->attr.exclude_host ||
+ event->attr.exclude_guest)
+ return -EINVAL;
+
+ /*
+ * Following the example set by other "uncore" PMUs, we accept any CPU
+ * and rewrite its affinity dynamically rather than having perf core
+ * handle cpu == -1 and pid == -1 for this case.
+ *
+ * The perf core will pin online CPUs for the duration of this call and
+ * the event being installed into its context, so the PMU's CPU can't
+ * change under our feet.
+ */
+ cpu = cpumask_first(&cci_pmu->cpus);
+ if (event->cpu < 0 || cpu < 0)
+ return -EINVAL;
+ event->cpu = cpu;
+
+ event->destroy = hw_perf_event_destroy;
+ if (!atomic_inc_not_zero(active_events)) {
+ mutex_lock(&cci_pmu->reserve_mutex);
+ if (atomic_read(active_events) == 0)
+ err = cci_pmu_get_hw(cci_pmu);
+ if (!err)
+ atomic_inc(active_events);
+ mutex_unlock(&cci_pmu->reserve_mutex);
+ }
+ if (err)
+ return err;
+
+ err = __hw_perf_event_init(event);
+ if (err)
+ hw_perf_event_destroy(event);
+
+ return err;
}
-static int cci_pmu_init(struct arm_pmu *cci_pmu, struct platform_device *pdev)
+static ssize_t pmu_attr_cpumask_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
{
- *cci_pmu = (struct arm_pmu){
- .name = pmu_names[probe_cci_revision()],
- .max_period = (1LLU << 32) - 1,
- .get_hw_events = pmu_get_hw_events,
- .get_event_idx = pmu_get_event_idx,
- .map_event = pmu_map_event,
- .request_irq = pmu_request_irq,
- .handle_irq = pmu_handle_irq,
- .free_irq = pmu_free_irq,
- .enable = pmu_enable_event,
- .disable = pmu_disable_event,
- .start = pmu_start,
- .stop = pmu_stop,
- .read_counter = pmu_read_counter,
- .write_counter = pmu_write_counter,
+ int n = cpulist_scnprintf(buf, PAGE_SIZE - 2, &pmu->cpus);
+
+ buf[n++] = '\n';
+ buf[n] = '\0';
+ return n;
+}
+
+static DEVICE_ATTR(cpumask, S_IRUGO, pmu_attr_cpumask_show, NULL);
+
+static struct attribute *pmu_attrs[] = {
+ &dev_attr_cpumask.attr,
+ NULL,
+};
+
+static struct attribute_group pmu_attr_group = {
+ .attrs = pmu_attrs,
+};
+
+static const struct attribute_group *pmu_attr_groups[] = {
+ &pmu_attr_group,
+ NULL
+};
+
+static int cci_pmu_init(struct cci_pmu *cci_pmu, struct platform_device *pdev)
+{
+ char *name = pmu_names[probe_cci_revision()];
+ cci_pmu->pmu = (struct pmu) {
+ .name = pmu_names[probe_cci_revision()],
+ .task_ctx_nr = perf_invalid_context,
+ .pmu_enable = cci_pmu_enable,
+ .pmu_disable = cci_pmu_disable,
+ .event_init = cci_pmu_event_init,
+ .add = cci_pmu_add,
+ .del = cci_pmu_del,
+ .start = cci_pmu_start,
+ .stop = cci_pmu_stop,
+ .read = pmu_read,
+ .attr_groups = pmu_attr_groups,
};
cci_pmu->plat_device = pdev;
cci_pmu->num_events = pmu_get_max_counters();
- return armpmu_register(cci_pmu, -1);
+ return perf_pmu_register(&cci_pmu->pmu, name, -1);
}
+static int cci_pmu_cpu_notifier(struct notifier_block *self,
+ unsigned long action, void *hcpu)
+{
+ unsigned int cpu = (long)hcpu;
+ unsigned int target;
+
+ switch (action & ~CPU_TASKS_FROZEN) {
+ case CPU_DOWN_PREPARE:
+ if (!cpumask_test_and_clear_cpu(cpu, &pmu->cpus))
+ break;
+ target = cpumask_any_but(cpu_online_mask, cpu);
+ if (target < 0) // UP, last CPU
+ break;
+ /*
+ * TODO: migrate context once core races on event->ctx have
+ * been fixed.
+ */
+ cpumask_set_cpu(target, &pmu->cpus);
+ default:
+ break;
+ }
+
+ return NOTIFY_OK;
+}
+
+static struct notifier_block cci_pmu_cpu_nb = {
+ .notifier_call = cci_pmu_cpu_notifier,
+ /*
+ * to migrate uncore events, our notifier should be executed
+ * before perf core's notifier.
+ */
+ .priority = CPU_PRI_PERF + 1,
+};
+
static const struct of_device_id arm_cci_pmu_matches[] = {
{
.compatible = "arm,cci-400-pmu",
return -EINVAL;
}
- pmu->cci_pmu = devm_kzalloc(&pdev->dev, sizeof(*(pmu->cci_pmu)), GFP_KERNEL);
- if (!pmu->cci_pmu)
- return -ENOMEM;
-
- pmu->hw_events.events = pmu->events;
- pmu->hw_events.used_mask = pmu->used_mask;
raw_spin_lock_init(&pmu->hw_events.pmu_lock);
+ mutex_init(&pmu->reserve_mutex);
+ atomic_set(&pmu->active_events, 0);
+ cpumask_set_cpu(smp_processor_id(), &pmu->cpus);
+
+ ret = register_cpu_notifier(&cci_pmu_cpu_nb);
+ if (ret)
+ return ret;
- ret = cci_pmu_init(pmu->cci_pmu, pdev);
+ ret = cci_pmu_init(pmu, pdev);
if (ret)
return ret;
#include <linux/list.h>
#include <linux/of.h>
#include <linux/bitops.h>
+#include <linux/pm.h>
+#ifdef CONFIG_ARM
#include <asm/bug.h>
#include <asm/signal.h>
+#endif
-#define ARB_TIMER 0x008
-#define ARB_ERR_CAP_CLR 0x7e4
#define ARB_ERR_CAP_CLEAR (1 << 0)
-#define ARB_ERR_CAP_HI_ADDR 0x7e8
-#define ARB_ERR_CAP_ADDR 0x7ec
-#define ARB_ERR_CAP_DATA 0x7f0
-#define ARB_ERR_CAP_STATUS 0x7f4
#define ARB_ERR_CAP_STATUS_TIMEOUT (1 << 12)
#define ARB_ERR_CAP_STATUS_TEA (1 << 11)
#define ARB_ERR_CAP_STATUS_BS_SHIFT (1 << 2)
#define ARB_ERR_CAP_STATUS_BS_MASK 0x3c
#define ARB_ERR_CAP_STATUS_WRITE (1 << 1)
#define ARB_ERR_CAP_STATUS_VALID (1 << 0)
-#define ARB_ERR_CAP_MASTER 0x7f8
+
+enum {
+ ARB_TIMER,
+ ARB_ERR_CAP_CLR,
+ ARB_ERR_CAP_HI_ADDR,
+ ARB_ERR_CAP_ADDR,
+ ARB_ERR_CAP_DATA,
+ ARB_ERR_CAP_STATUS,
+ ARB_ERR_CAP_MASTER,
+};
+
+static const int gisb_offsets_bcm7038[] = {
+ [ARB_TIMER] = 0x00c,
+ [ARB_ERR_CAP_CLR] = 0x0c4,
+ [ARB_ERR_CAP_HI_ADDR] = -1,
+ [ARB_ERR_CAP_ADDR] = 0x0c8,
+ [ARB_ERR_CAP_DATA] = 0x0cc,
+ [ARB_ERR_CAP_STATUS] = 0x0d0,
+ [ARB_ERR_CAP_MASTER] = -1,
+};
+
+static const int gisb_offsets_bcm7400[] = {
+ [ARB_TIMER] = 0x00c,
+ [ARB_ERR_CAP_CLR] = 0x0c8,
+ [ARB_ERR_CAP_HI_ADDR] = -1,
+ [ARB_ERR_CAP_ADDR] = 0x0cc,
+ [ARB_ERR_CAP_DATA] = 0x0d0,
+ [ARB_ERR_CAP_STATUS] = 0x0d4,
+ [ARB_ERR_CAP_MASTER] = 0x0d8,
+};
+
+static const int gisb_offsets_bcm7435[] = {
+ [ARB_TIMER] = 0x00c,
+ [ARB_ERR_CAP_CLR] = 0x168,
+ [ARB_ERR_CAP_HI_ADDR] = -1,
+ [ARB_ERR_CAP_ADDR] = 0x16c,
+ [ARB_ERR_CAP_DATA] = 0x170,
+ [ARB_ERR_CAP_STATUS] = 0x174,
+ [ARB_ERR_CAP_MASTER] = 0x178,
+};
+
+static const int gisb_offsets_bcm7445[] = {
+ [ARB_TIMER] = 0x008,
+ [ARB_ERR_CAP_CLR] = 0x7e4,
+ [ARB_ERR_CAP_HI_ADDR] = 0x7e8,
+ [ARB_ERR_CAP_ADDR] = 0x7ec,
+ [ARB_ERR_CAP_DATA] = 0x7f0,
+ [ARB_ERR_CAP_STATUS] = 0x7f4,
+ [ARB_ERR_CAP_MASTER] = 0x7f8,
+};
struct brcmstb_gisb_arb_device {
void __iomem *base;
+ const int *gisb_offsets;
struct mutex lock;
struct list_head next;
u32 valid_mask;
const char *master_names[sizeof(u32) * BITS_PER_BYTE];
+ u32 saved_timeout;
};
static LIST_HEAD(brcmstb_gisb_arb_device_list);
+static u32 gisb_read(struct brcmstb_gisb_arb_device *gdev, int reg)
+{
+ int offset = gdev->gisb_offsets[reg];
+
+ /* return 1 if the hardware doesn't have ARB_ERR_CAP_MASTER */
+ if (offset == -1)
+ return 1;
+
+ return ioread32(gdev->base + offset);
+}
+
+static void gisb_write(struct brcmstb_gisb_arb_device *gdev, u32 val, int reg)
+{
+ int offset = gdev->gisb_offsets[reg];
+
+ if (offset == -1)
+ return;
+ iowrite32(val, gdev->base + reg);
+}
+
static ssize_t gisb_arb_get_timeout(struct device *dev,
struct device_attribute *attr,
char *buf)
u32 timeout;
mutex_lock(&gdev->lock);
- timeout = ioread32(gdev->base + ARB_TIMER);
+ timeout = gisb_read(gdev, ARB_TIMER);
mutex_unlock(&gdev->lock);
return sprintf(buf, "%d", timeout);
return -EINVAL;
mutex_lock(&gdev->lock);
- iowrite32(val, gdev->base + ARB_TIMER);
+ gisb_write(gdev, val, ARB_TIMER);
mutex_unlock(&gdev->lock);
return count;
const char *m_name;
char m_fmt[11];
- cap_status = ioread32(gdev->base + ARB_ERR_CAP_STATUS);
+ cap_status = gisb_read(gdev, ARB_ERR_CAP_STATUS);
/* Invalid captured address, bail out */
if (!(cap_status & ARB_ERR_CAP_STATUS_VALID))
return 1;
/* Read the address and master */
- arb_addr = ioread32(gdev->base + ARB_ERR_CAP_ADDR) & 0xffffffff;
+ arb_addr = gisb_read(gdev, ARB_ERR_CAP_ADDR) & 0xffffffff;
#if (IS_ENABLED(CONFIG_PHYS_ADDR_T_64BIT))
- arb_addr |= (u64)ioread32(gdev->base + ARB_ERR_CAP_HI_ADDR) << 32;
+ arb_addr |= (u64)gisb_read(gdev, ARB_ERR_CAP_HI_ADDR) << 32;
#endif
- master = ioread32(gdev->base + ARB_ERR_CAP_MASTER);
+ master = gisb_read(gdev, ARB_ERR_CAP_MASTER);
m_name = brcmstb_gisb_master_to_str(gdev, master);
if (!m_name) {
m_name);
/* clear the GISB error */
- iowrite32(ARB_ERR_CAP_CLEAR, gdev->base + ARB_ERR_CAP_CLR);
+ gisb_write(gdev, ARB_ERR_CAP_CLEAR, ARB_ERR_CAP_CLR);
return 0;
}
+#ifdef CONFIG_ARM
static int brcmstb_bus_error_handler(unsigned long addr, unsigned int fsr,
struct pt_regs *regs)
{
return ret;
}
-
-void __init brcmstb_hook_fault_code(void)
-{
- hook_fault_code(22, brcmstb_bus_error_handler, SIGBUS, 0,
- "imprecise external abort");
-}
+#endif
static irqreturn_t brcmstb_gisb_timeout_handler(int irq, void *dev_id)
{
.attrs = gisb_arb_sysfs_attrs,
};
-static int brcmstb_gisb_arb_probe(struct platform_device *pdev)
+static const struct of_device_id brcmstb_gisb_arb_of_match[] = {
+ { .compatible = "brcm,gisb-arb", .data = gisb_offsets_bcm7445 },
+ { .compatible = "brcm,bcm7445-gisb-arb", .data = gisb_offsets_bcm7445 },
+ { .compatible = "brcm,bcm7435-gisb-arb", .data = gisb_offsets_bcm7435 },
+ { .compatible = "brcm,bcm7400-gisb-arb", .data = gisb_offsets_bcm7400 },
+ { .compatible = "brcm,bcm7038-gisb-arb", .data = gisb_offsets_bcm7038 },
+ { },
+};
+
+static int __init brcmstb_gisb_arb_probe(struct platform_device *pdev)
{
struct device_node *dn = pdev->dev.of_node;
struct brcmstb_gisb_arb_device *gdev;
+ const struct of_device_id *of_id;
struct resource *r;
int err, timeout_irq, tea_irq;
unsigned int num_masters, j = 0;
if (IS_ERR(gdev->base))
return PTR_ERR(gdev->base);
+ of_id = of_match_node(brcmstb_gisb_arb_of_match, dn);
+ if (!of_id) {
+ pr_err("failed to look up compatible string\n");
+ return -EINVAL;
+ }
+ gdev->gisb_offsets = of_id->data;
+
err = devm_request_irq(&pdev->dev, timeout_irq,
brcmstb_gisb_timeout_handler, 0, pdev->name,
gdev);
list_add_tail(&gdev->next, &brcmstb_gisb_arb_device_list);
+#ifdef CONFIG_ARM
+ hook_fault_code(22, brcmstb_bus_error_handler, SIGBUS, 0,
+ "imprecise external abort");
+#endif
+
dev_info(&pdev->dev, "registered mem: %p, irqs: %d, %d\n",
gdev->base, timeout_irq, tea_irq);
return 0;
}
-static const struct of_device_id brcmstb_gisb_arb_of_match[] = {
- { .compatible = "brcm,gisb-arb" },
- { },
+#ifdef CONFIG_PM_SLEEP
+static int brcmstb_gisb_arb_suspend(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct brcmstb_gisb_arb_device *gdev = platform_get_drvdata(pdev);
+
+ gdev->saved_timeout = gisb_read(gdev, ARB_TIMER);
+
+ return 0;
+}
+
+/* Make sure we provide the same timeout value that was configured before, and
+ * do this before the GISB timeout interrupt handler has any chance to run.
+ */
+static int brcmstb_gisb_arb_resume_noirq(struct device *dev)
+{
+ struct platform_device *pdev = to_platform_device(dev);
+ struct brcmstb_gisb_arb_device *gdev = platform_get_drvdata(pdev);
+
+ gisb_write(gdev, gdev->saved_timeout, ARB_TIMER);
+
+ return 0;
+}
+#else
+#define brcmstb_gisb_arb_suspend NULL
+#define brcmstb_gisb_arb_resume_noirq NULL
+#endif
+
+static const struct dev_pm_ops brcmstb_gisb_arb_pm_ops = {
+ .suspend = brcmstb_gisb_arb_suspend,
+ .resume_noirq = brcmstb_gisb_arb_resume_noirq,
};
static struct platform_driver brcmstb_gisb_arb_driver = {
- .probe = brcmstb_gisb_arb_probe,
.driver = {
.name = "brcm-gisb-arb",
.owner = THIS_MODULE,
.of_match_table = brcmstb_gisb_arb_of_match,
+ .pm = &brcmstb_gisb_arb_pm_ops,
},
};
static int __init brcm_gisb_driver_init(void)
{
- return platform_driver_register(&brcmstb_gisb_arb_driver);
+ return platform_driver_probe(&brcmstb_gisb_arb_driver,
+ brcmstb_gisb_arb_probe);
}
module_init(brcm_gisb_driver_init);
#include <linux/of_address.h>
#include <linux/debugfs.h>
#include <linux/log2.h>
+#include <linux/syscore_ops.h>
/*
* DDR target is the same on all platforms.
#define DOVE_DDR_BASE_CS_OFF(n) ((n) << 4)
+/* Relative to mbusbridge_base */
+#define MBUS_BRIDGE_CTRL_OFF 0x0
+#define MBUS_BRIDGE_BASE_OFF 0x4
+
+/* Maximum number of windows, for all known platforms */
+#define MBUS_WINS_MAX 20
+
struct mvebu_mbus_state;
struct mvebu_mbus_soc_data {
unsigned int num_wins;
unsigned int num_remappable_wins;
+ bool has_mbus_bridge;
unsigned int (*win_cfg_offset)(const int win);
void (*setup_cpu_target)(struct mvebu_mbus_state *s);
+ int (*save_cpu_target)(struct mvebu_mbus_state *s,
+ u32 *store_addr);
int (*show_cpu_target)(struct mvebu_mbus_state *s,
struct seq_file *seq, void *v);
};
+/*
+ * Used to store the state of one MBus window accross suspend/resume.
+ */
+struct mvebu_mbus_win_data {
+ u32 ctrl;
+ u32 base;
+ u32 remap_lo;
+ u32 remap_hi;
+};
+
struct mvebu_mbus_state {
void __iomem *mbuswins_base;
void __iomem *sdramwins_base;
+ void __iomem *mbusbridge_base;
+ phys_addr_t sdramwins_phys_base;
struct dentry *debugfs_root;
struct dentry *debugfs_sdram;
struct dentry *debugfs_devs;
struct resource pcie_io_aperture;
const struct mvebu_mbus_soc_data *soc;
int hw_io_coherency;
+
+ /* Used during suspend/resume */
+ u32 mbus_bridge_ctrl;
+ u32 mbus_bridge_base;
+ struct mvebu_mbus_win_data wins[MBUS_WINS_MAX];
};
static struct mvebu_mbus_state mbus_state;
mvebu_mbus_dram_info.num_cs = cs;
}
+static int
+mvebu_mbus_default_save_cpu_target(struct mvebu_mbus_state *mbus,
+ u32 *store_addr)
+{
+ int i;
+
+ for (i = 0; i < 4; i++) {
+ u32 base = readl(mbus->sdramwins_base + DDR_BASE_CS_OFF(i));
+ u32 size = readl(mbus->sdramwins_base + DDR_SIZE_CS_OFF(i));
+
+ writel(mbus->sdramwins_phys_base + DDR_BASE_CS_OFF(i),
+ store_addr++);
+ writel(base, store_addr++);
+ writel(mbus->sdramwins_phys_base + DDR_SIZE_CS_OFF(i),
+ store_addr++);
+ writel(size, store_addr++);
+ }
+
+ /* We've written 16 words to the store address */
+ return 16;
+}
+
static void __init
mvebu_mbus_dove_setup_cpu_target(struct mvebu_mbus_state *mbus)
{
mvebu_mbus_dram_info.num_cs = cs;
}
+static int
+mvebu_mbus_dove_save_cpu_target(struct mvebu_mbus_state *mbus,
+ u32 *store_addr)
+{
+ int i;
+
+ for (i = 0; i < 2; i++) {
+ u32 map = readl(mbus->sdramwins_base + DOVE_DDR_BASE_CS_OFF(i));
+
+ writel(mbus->sdramwins_phys_base + DOVE_DDR_BASE_CS_OFF(i),
+ store_addr++);
+ writel(map, store_addr++);
+ }
+
+ /* We've written 4 words to the store address */
+ return 4;
+}
+
+int mvebu_mbus_save_cpu_target(u32 *store_addr)
+{
+ return mbus_state.soc->save_cpu_target(&mbus_state, store_addr);
+}
+
static const struct mvebu_mbus_soc_data armada_370_xp_mbus_data = {
.num_wins = 20,
.num_remappable_wins = 8,
+ .has_mbus_bridge = true,
.win_cfg_offset = armada_370_xp_mbus_win_offset,
+ .save_cpu_target = mvebu_mbus_default_save_cpu_target,
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
.show_cpu_target = mvebu_sdram_debug_show_orion,
};
.num_wins = 8,
.num_remappable_wins = 4,
.win_cfg_offset = orion_mbus_win_offset,
+ .save_cpu_target = mvebu_mbus_default_save_cpu_target,
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
.show_cpu_target = mvebu_sdram_debug_show_orion,
};
.num_wins = 8,
.num_remappable_wins = 4,
.win_cfg_offset = orion_mbus_win_offset,
+ .save_cpu_target = mvebu_mbus_dove_save_cpu_target,
.setup_cpu_target = mvebu_mbus_dove_setup_cpu_target,
.show_cpu_target = mvebu_sdram_debug_show_dove,
};
.num_wins = 8,
.num_remappable_wins = 4,
.win_cfg_offset = orion_mbus_win_offset,
+ .save_cpu_target = mvebu_mbus_default_save_cpu_target,
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
.show_cpu_target = mvebu_sdram_debug_show_orion,
};
.num_wins = 8,
.num_remappable_wins = 2,
.win_cfg_offset = orion_mbus_win_offset,
+ .save_cpu_target = mvebu_mbus_default_save_cpu_target,
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
.show_cpu_target = mvebu_sdram_debug_show_orion,
};
.num_wins = 14,
.num_remappable_wins = 8,
.win_cfg_offset = mv78xx0_mbus_win_offset,
+ .save_cpu_target = mvebu_mbus_default_save_cpu_target,
.setup_cpu_target = mvebu_mbus_default_setup_cpu_target,
.show_cpu_target = mvebu_sdram_debug_show_orion,
};
}
fs_initcall(mvebu_mbus_debugfs_init);
+static int mvebu_mbus_suspend(void)
+{
+ struct mvebu_mbus_state *s = &mbus_state;
+ int win;
+
+ if (!s->mbusbridge_base)
+ return -ENODEV;
+
+ for (win = 0; win < s->soc->num_wins; win++) {
+ void __iomem *addr = s->mbuswins_base +
+ s->soc->win_cfg_offset(win);
+
+ s->wins[win].base = readl(addr + WIN_BASE_OFF);
+ s->wins[win].ctrl = readl(addr + WIN_CTRL_OFF);
+
+ if (win >= s->soc->num_remappable_wins)
+ continue;
+
+ s->wins[win].remap_lo = readl(addr + WIN_REMAP_LO_OFF);
+ s->wins[win].remap_hi = readl(addr + WIN_REMAP_HI_OFF);
+ }
+
+ s->mbus_bridge_ctrl = readl(s->mbusbridge_base +
+ MBUS_BRIDGE_CTRL_OFF);
+ s->mbus_bridge_base = readl(s->mbusbridge_base +
+ MBUS_BRIDGE_BASE_OFF);
+
+ return 0;
+}
+
+static void mvebu_mbus_resume(void)
+{
+ struct mvebu_mbus_state *s = &mbus_state;
+ int win;
+
+ writel(s->mbus_bridge_ctrl,
+ s->mbusbridge_base + MBUS_BRIDGE_CTRL_OFF);
+ writel(s->mbus_bridge_base,
+ s->mbusbridge_base + MBUS_BRIDGE_BASE_OFF);
+
+ for (win = 0; win < s->soc->num_wins; win++) {
+ void __iomem *addr = s->mbuswins_base +
+ s->soc->win_cfg_offset(win);
+
+ writel(s->wins[win].base, addr + WIN_BASE_OFF);
+ writel(s->wins[win].ctrl, addr + WIN_CTRL_OFF);
+
+ if (win >= s->soc->num_remappable_wins)
+ continue;
+
+ writel(s->wins[win].remap_lo, addr + WIN_REMAP_LO_OFF);
+ writel(s->wins[win].remap_hi, addr + WIN_REMAP_HI_OFF);
+ }
+}
+
+struct syscore_ops mvebu_mbus_syscore_ops = {
+ .suspend = mvebu_mbus_suspend,
+ .resume = mvebu_mbus_resume,
+};
+
static int __init mvebu_mbus_common_init(struct mvebu_mbus_state *mbus,
phys_addr_t mbuswins_phys_base,
size_t mbuswins_size,
phys_addr_t sdramwins_phys_base,
- size_t sdramwins_size)
+ size_t sdramwins_size,
+ phys_addr_t mbusbridge_phys_base,
+ size_t mbusbridge_size)
{
int win;
return -ENOMEM;
}
+ mbus->sdramwins_phys_base = sdramwins_phys_base;
+
+ if (mbusbridge_phys_base) {
+ mbus->mbusbridge_base = ioremap(mbusbridge_phys_base,
+ mbusbridge_size);
+ if (!mbus->mbusbridge_base) {
+ iounmap(mbus->sdramwins_base);
+ iounmap(mbus->mbuswins_base);
+ return -ENOMEM;
+ }
+ } else
+ mbus->mbusbridge_base = NULL;
+
for (win = 0; win < mbus->soc->num_wins; win++)
mvebu_mbus_disable_window(mbus, win);
mbus->soc->setup_cpu_target(mbus);
+ register_syscore_ops(&mvebu_mbus_syscore_ops);
+
return 0;
}
mbuswins_phys_base,
mbuswins_size,
sdramwins_phys_base,
- sdramwins_size);
+ sdramwins_size, 0, 0);
}
#ifdef CONFIG_OF
int __init mvebu_mbus_dt_init(bool is_coherent)
{
- struct resource mbuswins_res, sdramwins_res;
+ struct resource mbuswins_res, sdramwins_res, mbusbridge_res;
struct device_node *np, *controller;
const struct of_device_id *of_id;
const __be32 *prop;
return -EINVAL;
}
+ /*
+ * Set the resource to 0 so that it can be left unmapped by
+ * mvebu_mbus_common_init() if the DT doesn't carry the
+ * necessary information. This is needed to preserve backward
+ * compatibility.
+ */
+ memset(&mbusbridge_res, 0, sizeof(mbusbridge_res));
+
+ if (mbus_state.soc->has_mbus_bridge) {
+ if (of_address_to_resource(controller, 2, &mbusbridge_res))
+ pr_warn(FW_WARN "deprecated mbus-mvebu Device Tree, suspend/resume will not work\n");
+ }
+
mbus_state.hw_io_coherency = is_coherent;
/* Get optional pcie-{mem,io}-aperture properties */
mbuswins_res.start,
resource_size(&mbuswins_res),
sdramwins_res.start,
- resource_size(&sdramwins_res));
+ resource_size(&sdramwins_res),
+ mbusbridge_res.start,
+ resource_size(&mbusbridge_res));
if (ret)
return ret;
}
/* Error found so break the for loop */
- break;
+ return IRQ_HANDLED;
}
}
- return IRQ_HANDLED;
+
+ dev_err(l3->dev, "L3 %s IRQ not handled!!\n",
+ inttype ? "debug" : "application");
+
+ return IRQ_NONE;
}
static const struct of_device_id l3_noc_match[] = {
return ret;
}
+#ifdef CONFIG_PM
+
+/**
+ * l3_resume_noirq() - resume function for l3_noc
+ * @dev: pointer to l3_noc device structure
+ *
+ * We only have the resume handler only since we
+ * have already maintained the delta register
+ * configuration as part of configuring the system
+ */
+static int l3_resume_noirq(struct device *dev)
+{
+ struct omap_l3 *l3 = dev_get_drvdata(dev);
+ int i;
+ struct l3_flagmux_data *flag_mux;
+ void __iomem *base, *mask_regx = NULL;
+ u32 mask_val;
+
+ for (i = 0; i < l3->num_modules; i++) {
+ base = l3->l3_base[i];
+ flag_mux = l3->l3_flagmux[i];
+ if (!flag_mux->mask_app_bits && !flag_mux->mask_dbg_bits)
+ continue;
+
+ mask_regx = base + flag_mux->offset + L3_FLAGMUX_MASK0 +
+ (L3_APPLICATION_ERROR << 3);
+ mask_val = readl_relaxed(mask_regx);
+ mask_val &= ~(flag_mux->mask_app_bits);
+
+ writel_relaxed(mask_val, mask_regx);
+ mask_regx = base + flag_mux->offset + L3_FLAGMUX_MASK0 +
+ (L3_DEBUG_ERROR << 3);
+ mask_val = readl_relaxed(mask_regx);
+ mask_val &= ~(flag_mux->mask_dbg_bits);
+
+ writel_relaxed(mask_val, mask_regx);
+ }
+
+ /* Dummy read to force OCP barrier */
+ if (mask_regx)
+ (void)readl(mask_regx);
+
+ return 0;
+}
+
+static const struct dev_pm_ops l3_dev_pm_ops = {
+ .resume_noirq = l3_resume_noirq,
+};
+
+#define L3_DEV_PM_OPS (&l3_dev_pm_ops)
+#else
+#define L3_DEV_PM_OPS NULL
+#endif
+
static struct platform_driver omap_l3_driver = {
.probe = omap_l3_probe,
.driver = {
.name = "omap_l3_noc",
.owner = THIS_MODULE,
+ .pm = L3_DEV_PM_OPS,
.of_match_table = of_match_ptr(l3_noc_match),
},
};
#include <linux/platform_device.h>
#include <linux/interrupt.h>
#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
#include "omap_l3_smx.h"
static inline u64 omap3_l3_readll(void __iomem *base, u16 reg)
return ret;
}
-static int __init omap3_l3_probe(struct platform_device *pdev)
+#if IS_BUILTIN(CONFIG_OF)
+static const struct of_device_id omap3_l3_match[] = {
+ {
+ .compatible = "ti,omap3-l3-smx",
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(of, omap3_l3_match);
+#endif
+
+static int omap3_l3_probe(struct platform_device *pdev)
{
struct omap3_l3 *l3;
struct resource *res;
return ret;
}
-static int __exit omap3_l3_remove(struct platform_device *pdev)
+static int omap3_l3_remove(struct platform_device *pdev)
{
struct omap3_l3 *l3 = platform_get_drvdata(pdev);
}
static struct platform_driver omap3_l3_driver = {
- .remove = __exit_p(omap3_l3_remove),
+ .probe = omap3_l3_probe,
+ .remove = omap3_l3_remove,
.driver = {
- .name = "omap_l3_smx",
+ .name = "omap_l3_smx",
+ .of_match_table = of_match_ptr(omap3_l3_match),
},
};
static int __init omap3_l3_init(void)
{
- return platform_driver_probe(&omap3_l3_driver, omap3_l3_probe);
+ return platform_driver_register(&omap3_l3_driver);
}
postcore_initcall_sync(omap3_l3_init);
#include <asm/vio.h>
-static int pseries_rng_data_read(struct hwrng *rng, u32 *data)
+static int pseries_rng_read(struct hwrng *rng, void *data, size_t max, bool wait)
{
+ u64 buffer[PLPAR_HCALL_BUFSIZE];
+ size_t size = max < 8 ? max : 8;
int rc;
- rc = plpar_hcall(H_RANDOM, (unsigned long *)data);
+ rc = plpar_hcall(H_RANDOM, (unsigned long *)buffer);
if (rc != H_SUCCESS) {
pr_err_ratelimited("H_RANDOM call failed %d\n", rc);
return -EIO;
}
+ memcpy(data, buffer, size);
/* The hypervisor interface returns 64 bits */
- return 8;
+ return size;
}
/**
static struct hwrng pseries_rng = {
.name = KBUILD_MODNAME,
- .data_read = pseries_rng_data_read,
+ .read = pseries_rng_read,
};
static int __init pseries_rng_probe(struct vio_dev *dev,
}
#endif
-void __weak unxlate_dev_mem_ptr(unsigned long phys, void *addr)
+#ifndef unxlate_dev_mem_ptr
+#define unxlate_dev_mem_ptr unxlate_dev_mem_ptr
+void __weak unxlate_dev_mem_ptr(phys_addr_t phys, void *addr)
{
}
+#endif
/*
* This funcion reads the *physical* memory. The f_pos points directly to the
{
phys_addr_t p = *ppos;
ssize_t read, sz;
- char *ptr;
+ void *ptr;
if (p != *ppos)
return 0;
* uncached, then it must also be accessed uncached
* by the kernel or data corruption may occur
*/
- kbuf = xlate_dev_kmem_ptr((char *)p);
+ kbuf = xlate_dev_kmem_ptr((void *)p);
if (copy_to_user(buf, kbuf, sz))
return -EFAULT;
#endif
while (count > 0) {
- char *ptr;
+ void *ptr;
sz = size_inside_page(p, count);
* it must also be accessed uncached by the kernel or data
* corruption may occur.
*/
- ptr = xlate_dev_kmem_ptr((char *)p);
+ ptr = xlate_dev_kmem_ptr((void *)p);
copied = copy_from_user(ptr, buf, sz);
if (copied) {
__mix_pool_bytes(r, hash.w, sizeof(hash.w));
spin_unlock_irqrestore(&r->lock, flags);
- memset(workspace, 0, sizeof(workspace));
+ memzero_explicit(workspace, sizeof(workspace));
/*
* In case the hash function has some recognizable output
hash.w[2] ^= rol32(hash.w[2], 16);
memcpy(out, &hash, EXTRACT_SIZE);
- memset(&hash, 0, sizeof(hash));
+ memzero_explicit(&hash, sizeof(hash));
}
/*
}
/* Wipe data just returned from memory */
- memset(tmp, 0, sizeof(tmp));
+ memzero_explicit(tmp, sizeof(tmp));
return ret;
}
}
/* Wipe data just returned from memory */
- memset(tmp, 0, sizeof(tmp));
+ memzero_explicit(tmp, sizeof(tmp));
return ret;
}
static const struct file_operations raw_fops = {
.read = new_sync_read,
- .read_iter = generic_file_read_iter,
+ .read_iter = blkdev_read_iter,
.write = new_sync_write,
.write_iter = blkdev_write_iter,
.fsync = blkdev_fsync,
spin_lock_init(&port->outvq_lock);
init_waitqueue_head(&port->waitqueue);
- virtio_device_ready(portdev->vdev);
-
/* Fill the in_vq with buffers so the host can send us data. */
nr_added_bufs = fill_queue(port->in_vq, &port->inbuf_lock);
if (!nr_added_bufs) {
spin_lock_init(&portdev->ports_lock);
INIT_LIST_HEAD(&portdev->ports);
+ virtio_device_ready(portdev->vdev);
+
if (multiport) {
unsigned int nr_added_bufs;
tmp = pmc_read(pmc, AT91_PMC_USB);
usbdiv = (tmp & AT91_PMC_OHCIUSBDIV) >> SAM9X5_USB_DIV_SHIFT;
- return parent_rate / (usbdiv + 1);
+
+ return DIV_ROUND_CLOSEST(parent_rate, (usbdiv + 1));
}
static long at91sam9x5_clk_usb_round_rate(struct clk_hw *hw, unsigned long rate,
unsigned long *parent_rate)
{
unsigned long div;
- unsigned long bestrate;
- unsigned long tmp;
+
+ if (!rate)
+ return -EINVAL;
if (rate >= *parent_rate)
return *parent_rate;
- div = *parent_rate / rate;
- if (div >= SAM9X5_USB_MAX_DIV)
- return *parent_rate / (SAM9X5_USB_MAX_DIV + 1);
-
- bestrate = *parent_rate / div;
- tmp = *parent_rate / (div + 1);
- if (bestrate - rate > rate - tmp)
- bestrate = tmp;
+ div = DIV_ROUND_CLOSEST(*parent_rate, rate);
+ if (div > SAM9X5_USB_MAX_DIV + 1)
+ div = SAM9X5_USB_MAX_DIV + 1;
- return bestrate;
+ return DIV_ROUND_CLOSEST(*parent_rate, div);
}
static int at91sam9x5_clk_usb_set_parent(struct clk_hw *hw, u8 index)
u32 tmp;
struct at91sam9x5_clk_usb *usb = to_at91sam9x5_clk_usb(hw);
struct at91_pmc *pmc = usb->pmc;
- unsigned long div = parent_rate / rate;
+ unsigned long div;
+
+ if (!rate)
+ return -EINVAL;
- if (parent_rate % rate || div < 1 || div >= SAM9X5_USB_MAX_DIV)
+ div = DIV_ROUND_CLOSEST(parent_rate, rate);
+ if (div > SAM9X5_USB_MAX_DIV + 1 || !div)
return -EINVAL;
tmp = pmc_read(pmc, AT91_PMC_USB) & ~AT91_PMC_OHCIUSBDIV;
tmp_parent_rate = rate * usb->divisors[i];
tmp_parent_rate = __clk_round_rate(parent, tmp_parent_rate);
- tmprate = tmp_parent_rate / usb->divisors[i];
+ tmprate = DIV_ROUND_CLOSEST(tmp_parent_rate, usb->divisors[i]);
if (tmprate < rate)
tmpdiff = rate - tmprate;
else
struct at91_pmc *pmc = usb->pmc;
unsigned long div;
- if (!rate || parent_rate % rate)
+ if (!rate)
return -EINVAL;
- div = parent_rate / rate;
+ div = DIV_ROUND_CLOSEST(parent_rate, rate);
for (i = 0; i < RM9200_USB_DIV_TAB_SIZE; i++) {
if (usb->divisors[i] == div) {
if (!rate)
rate = 1;
+ /* if read only, just return current value */
+ if (divider->flags & CLK_DIVIDER_READ_ONLY) {
+ bestdiv = readl(divider->reg) >> divider->shift;
+ bestdiv &= div_mask(divider);
+ bestdiv = _get_div(divider, bestdiv);
+ return bestdiv;
+ }
+
maxdiv = _get_maxdiv(divider);
if (!(__clk_get_flags(hw->clk) & CLK_SET_RATE_PARENT)) {
};
EXPORT_SYMBOL_GPL(clk_divider_ops);
-const struct clk_ops clk_divider_ro_ops = {
- .recalc_rate = clk_divider_recalc_rate,
-};
-EXPORT_SYMBOL_GPL(clk_divider_ro_ops);
-
static struct clk *_register_divider(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
}
init.name = name;
- if (clk_divider_flags & CLK_DIVIDER_READ_ONLY)
- init.ops = &clk_divider_ro_ops;
- else
- init.ops = &clk_divider_ops;
+ init.ops = &clk_divider_ops;
init.flags = flags | CLK_IS_BASIC;
init.parent_names = (parent_name ? &parent_name: NULL);
init.num_parents = (parent_name ? 1 : 0);
#include <linux/clk-provider.h>
#include <linux/platform_device.h>
#include <linux/mfd/samsung/s2mps11.h>
+#include <linux/mfd/samsung/s2mps13.h>
#include <linux/mfd/samsung/s2mps14.h>
#include <linux/mfd/samsung/s5m8767.h>
#include <linux/mfd/samsung/core.h>
},
};
+static struct clk_init_data s2mps13_clks_init[S2MPS11_CLKS_NUM] = {
+ [S2MPS11_CLK_AP] = {
+ .name = "s2mps13_ap",
+ .ops = &s2mps11_clk_ops,
+ .flags = CLK_IS_ROOT,
+ },
+ [S2MPS11_CLK_CP] = {
+ .name = "s2mps13_cp",
+ .ops = &s2mps11_clk_ops,
+ .flags = CLK_IS_ROOT,
+ },
+ [S2MPS11_CLK_BT] = {
+ .name = "s2mps13_bt",
+ .ops = &s2mps11_clk_ops,
+ .flags = CLK_IS_ROOT,
+ },
+};
+
static struct clk_init_data s2mps14_clks_init[S2MPS11_CLKS_NUM] = {
[S2MPS11_CLK_AP] = {
.name = "s2mps14_ap",
s2mps11_reg = S2MPS11_REG_RTC_CTRL;
clks_init = s2mps11_clks_init;
break;
+ case S2MPS13X:
+ s2mps11_reg = S2MPS13_REG_RTCCTRL;
+ clks_init = s2mps13_clks_init;
+ break;
case S2MPS14X:
s2mps11_reg = S2MPS14_REG_RTCCTRL;
clks_init = s2mps14_clks_init;
static const struct platform_device_id s2mps11_clk_id[] = {
{ "s2mps11-clk", S2MPS11X},
+ { "s2mps13-clk", S2MPS13X},
{ "s2mps14-clk", S2MPS14X},
{ "s5m8767-clk", S5M8767X},
{ },
#include <linux/io.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/syscore_ops.h>
#include "common.h"
spinlock_t *lock;
struct clk **gates;
int num_gates;
+ void __iomem *base;
+ u32 saved_reg;
};
#define to_clk_gate(_hw) container_of(_hw, struct clk_gate, hw)
+static struct clk_gating_ctrl *ctrl;
+
static struct clk *clk_gating_get_src(
struct of_phandle_args *clkspec, void *data)
{
- struct clk_gating_ctrl *ctrl = (struct clk_gating_ctrl *)data;
int n;
if (clkspec->args_count < 1)
return ERR_PTR(-ENODEV);
}
+static int mvebu_clk_gating_suspend(void)
+{
+ ctrl->saved_reg = readl(ctrl->base);
+ return 0;
+}
+
+static void mvebu_clk_gating_resume(void)
+{
+ writel(ctrl->saved_reg, ctrl->base);
+}
+
+static struct syscore_ops clk_gate_syscore_ops = {
+ .suspend = mvebu_clk_gating_suspend,
+ .resume = mvebu_clk_gating_resume,
+};
+
void __init mvebu_clk_gating_setup(struct device_node *np,
const struct clk_gating_soc_desc *desc)
{
- struct clk_gating_ctrl *ctrl;
struct clk *clk;
void __iomem *base;
const char *default_parent = NULL;
int n;
+ if (ctrl) {
+ pr_err("mvebu-clk-gating: cannot instantiate more than one gatable clock device\n");
+ return;
+ }
+
base = of_iomap(np, 0);
if (WARN_ON(!base))
return;
/* lock must already be initialized */
ctrl->lock = &ctrl_gating_lock;
+ ctrl->base = base;
+
/* Count, allocate, and register clock gates */
for (n = 0; desc[n].name;)
n++;
of_clk_add_provider(np, clk_gating_get_src, ctrl);
+ register_syscore_ops(&clk_gate_syscore_ops);
+
return;
gates_out:
kfree(ctrl);
unsigned long ccsr = CCSR;
osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
- a = cccr & CCCR_A_BIT;
+ a = cccr & (1 << CCCR_A_BIT);
l = ccsr & CCSR_L_MASK;
if (osc_forced || a)
unsigned long ccsr = CCSR;
osc_forced = ccsr & (1 << CCCR_CPDIS_BIT);
- a = cccr & CCCR_A_BIT;
+ a = cccr & (1 << CCCR_A_BIT);
if (osc_forced)
return PXA_MEM_13Mhz;
if (a)
[ESC1_CLK_SRC] = &esc1_clk_src.clkr,
[HDMI_CLK_SRC] = &hdmi_clk_src.clkr,
[VSYNC_CLK_SRC] = &vsync_clk_src.clkr,
- [RBCPR_CLK_SRC] = &rbcpr_clk_src.clkr,
+ [MMSS_RBCPR_CLK_SRC] = &rbcpr_clk_src.clkr,
[RBBMTIMER_CLK_SRC] = &rbbmtimer_clk_src.clkr,
[MAPLE_CLK_SRC] = &maple_clk_src.clkr,
[VDP_CLK_SRC] = &vdp_clk_src.clkr,
div->width = div_width;
div->lock = lock;
div->table = div_table;
- div_ops = (div_flags & CLK_DIVIDER_READ_ONLY)
- ? &clk_divider_ro_ops
- : &clk_divider_ops;
+ div_ops = &clk_divider_ops;
}
clk = clk_register_composite(NULL, name, parent_names, num_parents,
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
+#include <linux/notifier.h>
+#include <linux/reboot.h>
#include "clk.h"
#include "clk-pll.h"
#define CPU_CLK_STATUS 0xfc
#define MISC_DOUT1 0x558
+static void __iomem *reg_base;
+
/* parent clock name list */
PNAME(mout_armclk_p) = { "cplla", "cpllb" };
PNAME(mout_spi_p) = { "div125", "div200" };
{},
};
+static int exynos5440_clk_restart_notify(struct notifier_block *this,
+ unsigned long code, void *unused)
+{
+ u32 val, status;
+
+ status = readl_relaxed(reg_base + 0xbc);
+ val = readl_relaxed(reg_base + 0xcc);
+ val = (val & 0xffff0000) | (status & 0xffff);
+ writel_relaxed(val, reg_base + 0xcc);
+
+ return NOTIFY_DONE;
+}
+
+/*
+ * Exynos5440 Clock restart notifier, handles restart functionality
+ */
+static struct notifier_block exynos5440_clk_restart_handler = {
+ .notifier_call = exynos5440_clk_restart_notify,
+ .priority = 128,
+};
+
/* register exynos5440 clocks */
static void __init exynos5440_clk_init(struct device_node *np)
{
- void __iomem *reg_base;
struct samsung_clk_provider *ctx;
reg_base = of_iomap(np, 0);
samsung_clk_of_add_provider(np, ctx);
+ if (register_restart_handler(&exynos5440_clk_restart_handler))
+ pr_warn("exynos5440 clock can't register restart handler\n");
+
pr_info("Exynos5440: arm_clk = %ldHz\n", _get_rate("arm_clk"));
pr_info("exynos5440 clock initialization complete\n");
}
return clk;
}
+
+static const struct clk_div_table mc_div_table[] = {
+ { .val = 0, .div = 2 },
+ { .val = 1, .div = 1 },
+ { .val = 0, .div = 0 },
+};
+
+struct clk *tegra_clk_register_mc(const char *name, const char *parent_name,
+ void __iomem *reg, spinlock_t *lock)
+{
+ return clk_register_divider_table(NULL, name, parent_name, 0, reg,
+ 16, 1, 0, mc_div_table, lock);
+}
static DEFINE_SPINLOCK(pll_d2_lock);
static DEFINE_SPINLOCK(pll_u_lock);
static DEFINE_SPINLOCK(pll_re_lock);
+static DEFINE_SPINLOCK(emc_lock);
static struct div_nmp pllxc_nmp = {
.divm_shift = 0,
ARRAY_SIZE(mux_pllmcp_clkm),
CLK_SET_RATE_NO_REPARENT,
clk_base + CLK_SOURCE_EMC,
- 29, 3, 0, NULL);
+ 29, 3, 0, &emc_lock);
+
+ clk = tegra_clk_register_mc("mc", "emc_mux", clk_base + CLK_SOURCE_EMC,
+ &emc_lock);
+ clks[TEGRA114_CLK_MC] = clk;
for (i = 0; i < ARRAY_SIZE(tegra_periph_clk_list); i++) {
data = &tegra_periph_clk_list[i];
static DEFINE_SPINLOCK(pll_e_lock);
static DEFINE_SPINLOCK(pll_re_lock);
static DEFINE_SPINLOCK(pll_u_lock);
+static DEFINE_SPINLOCK(emc_lock);
/* possible OSC frequencies in Hz */
static unsigned long tegra124_input_freq[] = {
clk = clk_register_mux(NULL, "emc_mux", mux_pllmcp_clkm,
ARRAY_SIZE(mux_pllmcp_clkm), 0,
clk_base + CLK_SOURCE_EMC,
- 29, 3, 0, NULL);
+ 29, 3, 0, &emc_lock);
+
+ clk = tegra_clk_register_mc("mc", "emc_mux", clk_base + CLK_SOURCE_EMC,
+ &emc_lock);
+ clks[TEGRA124_CLK_MC] = clk;
/* cml0 */
clk = clk_register_gate(NULL, "cml0", "pll_e", 0, clk_base + PLLE_AUX,
static void __iomem *clk_base;
static void __iomem *pmc_base;
+static DEFINE_SPINLOCK(emc_lock);
+
#define TEGRA_INIT_DATA_MUX(_name, _parents, _offset, \
_clk_num, _gate_flags, _clk_id) \
TEGRA_INIT_DATA(_name, NULL, NULL, _parents, _offset, \
ARRAY_SIZE(mux_pllmcp_clkm),
CLK_SET_RATE_NO_REPARENT,
clk_base + CLK_SOURCE_EMC,
- 30, 2, 0, NULL);
+ 30, 2, 0, &emc_lock);
clk = tegra_clk_register_periph_gate("emc", "emc_mux", 0, clk_base, 0,
57, periph_clk_enb_refcnt);
clks[TEGRA20_CLK_EMC] = clk;
+ clk = tegra_clk_register_mc("mc", "emc_mux", clk_base + CLK_SOURCE_EMC,
+ &emc_lock);
+ clks[TEGRA20_CLK_MC] = clk;
+
/* dsi */
clk = tegra_clk_register_periph_gate("dsi", "pll_d", 0, clk_base, 0,
48, periph_clk_enb_refcnt);
static DEFINE_SPINLOCK(cml_lock);
static DEFINE_SPINLOCK(pll_d_lock);
+static DEFINE_SPINLOCK(emc_lock);
#define TEGRA_INIT_DATA_MUX(_name, _parents, _offset, \
_clk_num, _gate_flags, _clk_id) \
ARRAY_SIZE(mux_pllmcp_clkm),
CLK_SET_RATE_NO_REPARENT,
clk_base + CLK_SOURCE_EMC,
- 30, 2, 0, NULL);
+ 30, 2, 0, &emc_lock);
clk = tegra_clk_register_periph_gate("emc", "emc_mux", 0, clk_base, 0,
57, periph_clk_enb_refcnt);
clks[TEGRA30_CLK_EMC] = clk;
+ clk = tegra_clk_register_mc("mc", "emc_mux", clk_base + CLK_SOURCE_EMC,
+ &emc_lock);
+ clks[TEGRA30_CLK_MC] = clk;
+
/* cml0 */
clk = clk_register_gate(NULL, "cml0", "pll_e", 0, clk_base + PLLE_AUX,
0, 0, &cml_lock);
const char *parent_name, void __iomem *reg,
unsigned long flags, u8 clk_divider_flags, u8 shift, u8 width,
u8 frac_width, spinlock_t *lock);
+struct clk *tegra_clk_register_mc(const char *name, const char *parent_name,
+ void __iomem *reg, spinlock_t *lock);
/*
* Tegra PLL:
.recalc_rate = &omap4_dpll_regm4xen_recalc,
.round_rate = &omap4_dpll_regm4xen_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
+ .set_parent = &omap3_noncore_dpll_set_parent,
+ .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent,
+ .determine_rate = &omap4_dpll_regm4xen_determine_rate,
.get_parent = &omap2_init_dpll_parent,
};
#else
.recalc_rate = &omap3_dpll_recalc,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
+ .set_parent = &omap3_noncore_dpll_set_parent,
+ .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent,
+ .determine_rate = &omap3_noncore_dpll_determine_rate,
.get_parent = &omap2_init_dpll_parent,
};
.get_parent = &omap2_init_dpll_parent,
.round_rate = &omap2_dpll_round_rate,
.set_rate = &omap3_noncore_dpll_set_rate,
+ .set_parent = &omap3_noncore_dpll_set_parent,
+ .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent,
+ .determine_rate = &omap3_noncore_dpll_determine_rate,
};
#else
static const struct clk_ops dpll_core_ck_ops = {};
.get_parent = &omap2_init_dpll_parent,
.recalc_rate = &omap3_dpll_recalc,
.set_rate = &omap3_noncore_dpll_set_rate,
+ .set_parent = &omap3_noncore_dpll_set_parent,
+ .set_rate_and_parent = &omap3_noncore_dpll_set_rate_and_parent,
+ .determine_rate = &omap3_noncore_dpll_determine_rate,
.round_rate = &omap2_dpll_round_rate,
};
.get_parent = &omap2_init_dpll_parent,
.recalc_rate = &omap3_dpll_recalc,
.set_rate = &omap3_dpll4_set_rate,
+ .set_parent = &omap3_noncore_dpll_set_parent,
+ .set_rate_and_parent = &omap3_dpll4_set_rate_and_parent,
+ .determine_rate = &omap3_noncore_dpll_determine_rate,
.round_rate = &omap2_dpll_round_rate,
};
#endif
obj-$(CONFIG_ICST) += clk-icst.o clk-versatile.o
obj-$(CONFIG_INTEGRATOR_IMPD1) += clk-impd1.o
obj-$(CONFIG_ARCH_REALVIEW) += clk-realview.o
-obj-$(CONFIG_ARCH_VEXPRESS) += clk-vexpress.o
obj-$(CONFIG_CLK_SP810) += clk-sp810.o
obj-$(CONFIG_CLK_VEXPRESS_OSC) += clk-vexpress-osc.o
static int vexpress_osc_probe(struct platform_device *pdev)
{
- struct clk_lookup *cl = pdev->dev.platform_data; /* Non-DT lookup */
struct clk_init_data init;
struct vexpress_osc *osc;
struct clk *clk;
of_clk_add_provider(pdev->dev.of_node, of_clk_src_simple_get, clk);
- /* Only happens for non-DT cases */
- if (cl) {
- cl->clk = clk;
- clkdev_add(cl);
- }
-
dev_dbg(&pdev->dev, "Registered clock '%s'\n", init.name);
return 0;
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * Copyright (C) 2012 ARM Limited
- */
-
-#include <linux/amba/sp810.h>
-#include <linux/clkdev.h>
-#include <linux/clk-provider.h>
-#include <linux/err.h>
-#include <linux/vexpress.h>
-
-static struct clk *vexpress_sp810_timerclken[4];
-static DEFINE_SPINLOCK(vexpress_sp810_lock);
-
-static void __init vexpress_sp810_init(void __iomem *base)
-{
- int i;
-
- if (WARN_ON(!base))
- return;
-
- for (i = 0; i < ARRAY_SIZE(vexpress_sp810_timerclken); i++) {
- char name[12];
- const char *parents[] = {
- "v2m:refclk32khz", /* REFCLK */
- "v2m:refclk1mhz" /* TIMCLK */
- };
-
- snprintf(name, ARRAY_SIZE(name), "timerclken%d", i);
-
- vexpress_sp810_timerclken[i] = clk_register_mux(NULL, name,
- parents, 2, CLK_SET_RATE_NO_REPARENT,
- base + SCCTRL, SCCTRL_TIMERENnSEL_SHIFT(i), 1,
- 0, &vexpress_sp810_lock);
-
- if (WARN_ON(IS_ERR(vexpress_sp810_timerclken[i])))
- break;
- }
-}
-
-
-static const char * const vexpress_clk_24mhz_periphs[] __initconst = {
- "mb:uart0", "mb:uart1", "mb:uart2", "mb:uart3",
- "mb:mmci", "mb:kmi0", "mb:kmi1"
-};
-
-void __init vexpress_clk_init(void __iomem *sp810_base)
-{
- struct clk *clk;
- int i;
-
- clk = clk_register_fixed_rate(NULL, "dummy_apb_pclk", NULL,
- CLK_IS_ROOT, 0);
- WARN_ON(clk_register_clkdev(clk, "apb_pclk", NULL));
-
- clk = clk_register_fixed_rate(NULL, "v2m:clk_24mhz", NULL,
- CLK_IS_ROOT, 24000000);
- for (i = 0; i < ARRAY_SIZE(vexpress_clk_24mhz_periphs); i++)
- WARN_ON(clk_register_clkdev(clk, NULL,
- vexpress_clk_24mhz_periphs[i]));
-
- clk = clk_register_fixed_rate(NULL, "v2m:refclk32khz", NULL,
- CLK_IS_ROOT, 32768);
- WARN_ON(clk_register_clkdev(clk, NULL, "v2m:wdt"));
-
- clk = clk_register_fixed_rate(NULL, "v2m:refclk1mhz", NULL,
- CLK_IS_ROOT, 1000000);
-
- vexpress_sp810_init(sp810_base);
-
- for (i = 0; i < ARRAY_SIZE(vexpress_sp810_timerclken); i++)
- WARN_ON(clk_set_parent(vexpress_sp810_timerclken[i], clk));
-
- WARN_ON(clk_register_clkdev(vexpress_sp810_timerclken[0],
- "v2m-timer0", "sp804"));
- WARN_ON(clk_register_clkdev(vexpress_sp810_timerclken[1],
- "v2m-timer1", "sp804"));
-}
config MESON6_TIMER
bool
+ select CLKSRC_MMIO
config ORION_TIMER
select CLKSRC_OF
obj-$(CONFIG_CLKSRC_METAG_GENERIC) += metag_generic.o
obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST) += dummy_timer.o
obj-$(CONFIG_ARCH_KEYSTONE) += timer-keystone.o
+obj-$(CONFIG_ARCH_INTEGRATOR_AP) += timer-integrator-ap.o
obj-$(CONFIG_CLKSRC_VERSATILE) += versatile.o
/* Register the CP15 based counter if we have one */
if (type & ARCH_CP15_TIMER) {
- arch_timer_read_counter = arch_counter_get_cntvct;
+ if (arch_timer_use_virtual)
+ arch_timer_read_counter = arch_counter_get_cntvct;
+ else
+ arch_timer_read_counter = arch_counter_get_cntpct;
} else {
arch_timer_read_counter = arch_counter_get_cntvct_mem;
arch_timer_probed(int type, const struct of_device_id *matches)
{
struct device_node *dn;
- bool probed = false;
+ bool probed = true;
dn = of_find_matching_node(NULL, matches);
- if (dn && of_device_is_available(dn) && (arch_timers_present & type))
- probed = true;
+ if (dn && of_device_is_available(dn) && !(arch_timers_present & type))
+ probed = false;
of_node_put(dn);
return probed;
arch_timer_ppi[i] = irq_of_parse_and_map(np, i);
arch_timer_detect_rate(NULL, np);
+ /*
+ * If we cannot rely on firmware initializing the timer registers then
+ * we should use the physical timers instead.
+ */
+ if (IS_ENABLED(CONFIG_ARM) &&
+ of_property_read_bool(np, "arm,cpu-registers-not-fw-configured"))
+ arch_timer_use_virtual = false;
+
/*
* If HYP mode is available, we know that the physical timer
* has been configured to be accessible from PL1. Use it, so
/* Make sure timer is stopped before playing with interrupts */
sun4i_clkevt_time_stop(0);
+ sun4i_clockevent.cpumask = cpu_possible_mask;
+ sun4i_clockevent.irq = irq;
+
+ clockevents_config_and_register(&sun4i_clockevent, rate,
+ TIMER_SYNC_TICKS, 0xffffffff);
+
ret = setup_irq(irq, &sun4i_timer_irq);
if (ret)
pr_warn("failed to setup irq %d\n", irq);
/* Enable timer0 interrupt */
val = readl(timer_base + TIMER_IRQ_EN_REG);
writel(val | TIMER_IRQ_EN(0), timer_base + TIMER_IRQ_EN_REG);
-
- sun4i_clockevent.cpumask = cpu_possible_mask;
- sun4i_clockevent.irq = irq;
-
- clockevents_config_and_register(&sun4i_clockevent, rate,
- TIMER_SYNC_TICKS, 0xffffffff);
}
CLOCKSOURCE_OF_DECLARE(sun4i, "allwinner,sun4i-a10-timer",
sun4i_timer_init);
#include <linux/module.h>
#include <linux/sched_clock.h>
#include <linux/percpu.h>
+#include <linux/syscore_ops.h>
/*
* Timer block registers.
.notifier_call = armada_370_xp_timer_cpu_notify,
};
+static u32 timer0_ctrl_reg, timer0_local_ctrl_reg;
+
+static int armada_370_xp_timer_suspend(void)
+{
+ timer0_ctrl_reg = readl(timer_base + TIMER_CTRL_OFF);
+ timer0_local_ctrl_reg = readl(local_base + TIMER_CTRL_OFF);
+ return 0;
+}
+
+static void armada_370_xp_timer_resume(void)
+{
+ writel(0xffffffff, timer_base + TIMER0_VAL_OFF);
+ writel(0xffffffff, timer_base + TIMER0_RELOAD_OFF);
+ writel(timer0_ctrl_reg, timer_base + TIMER_CTRL_OFF);
+ writel(timer0_local_ctrl_reg, local_base + TIMER_CTRL_OFF);
+}
+
+struct syscore_ops armada_370_xp_timer_syscore_ops = {
+ .suspend = armada_370_xp_timer_suspend,
+ .resume = armada_370_xp_timer_resume,
+};
+
static void __init armada_370_xp_timer_common_init(struct device_node *np)
{
u32 clr = 0, set = 0;
/* Immediately configure the timer on the boot CPU */
if (!res)
armada_370_xp_timer_setup(this_cpu_ptr(armada_370_xp_evt));
+
+ register_syscore_ops(&armada_370_xp_timer_syscore_ops);
}
static void __init armada_xp_timer_init(struct device_node *np)
/* The 25Mhz fixed clock is mandatory, and must always be available */
BUG_ON(IS_ERR(clk));
+ clk_prepare_enable(clk);
timer_clk = clk_get_rate(clk);
armada_370_xp_timer_common_init(np);
CLOCKSOURCE_OF_DECLARE(armada_xp, "marvell,armada-xp-timer",
armada_xp_timer_init);
+static void __init armada_375_timer_init(struct device_node *np)
+{
+ struct clk *clk;
+
+ clk = of_clk_get_by_name(np, "fixed");
+ if (!IS_ERR(clk)) {
+ clk_prepare_enable(clk);
+ timer_clk = clk_get_rate(clk);
+ } else {
+
+ /*
+ * This fallback is required in order to retain proper
+ * devicetree backwards compatibility.
+ */
+ clk = of_clk_get(np, 0);
+
+ /* Must have at least a clock */
+ BUG_ON(IS_ERR(clk));
+ clk_prepare_enable(clk);
+ timer_clk = clk_get_rate(clk) / TIMER_DIVIDER;
+ timer25Mhz = false;
+ }
+
+ armada_370_xp_timer_common_init(np);
+}
+CLOCKSOURCE_OF_DECLARE(armada_375, "marvell,armada-375-timer",
+ armada_375_timer_init);
+
static void __init armada_370_timer_init(struct device_node *np)
{
struct clk *clk = of_clk_get(np, 0);
BUG_ON(IS_ERR(clk));
+ clk_prepare_enable(clk);
timer_clk = clk_get_rate(clk) / TIMER_DIVIDER;
timer25Mhz = false;
}
CLOCKSOURCE_OF_DECLARE(at91sam926x_pit, "atmel,at91sam9260-pit",
at91sam926x_pit_dt_init);
-
-static void __iomem *pit_base_addr;
-
-void __init at91sam926x_pit_init(int irq)
-{
- struct pit_data *data;
-
- data = kzalloc(sizeof(*data), GFP_KERNEL);
- if (!data)
- panic(pr_fmt("Unable to allocate memory\n"));
-
- data->base = pit_base_addr;
-
- data->mck = clk_get(NULL, "mck");
- if (IS_ERR(data->mck))
- panic(pr_fmt("Unable to get mck clk\n"));
-
- data->irq = irq;
-
- at91sam926x_pit_common_init(data);
-}
-
-void __init at91sam926x_ioremap_pit(u32 addr)
-{
- if (of_have_populated_dt())
- return;
-
- pit_base_addr = ioremap(addr, 16);
-
- if (!pit_base_addr)
- panic(pr_fmt("Impossible to ioremap PIT\n"));
-}
--- /dev/null
+/*
+ * Integrator/AP timer driver
+ * Copyright (C) 2000-2003 Deep Blue Solutions Ltd
+ * Copyright (c) 2014, Linaro Limited
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/clk.h>
+#include <linux/clocksource.h>
+#include <linux/of_irq.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/clockchips.h>
+#include <linux/interrupt.h>
+#include <linux/sched_clock.h>
+#include <asm/hardware/arm_timer.h>
+
+static void __iomem * sched_clk_base;
+
+static u64 notrace integrator_read_sched_clock(void)
+{
+ return -readl(sched_clk_base + TIMER_VALUE);
+}
+
+static void integrator_clocksource_init(unsigned long inrate,
+ void __iomem *base)
+{
+ u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC;
+ unsigned long rate = inrate;
+
+ if (rate >= 1500000) {
+ rate /= 16;
+ ctrl |= TIMER_CTRL_DIV16;
+ }
+
+ writel(0xffff, base + TIMER_LOAD);
+ writel(ctrl, base + TIMER_CTRL);
+
+ clocksource_mmio_init(base + TIMER_VALUE, "timer2",
+ rate, 200, 16, clocksource_mmio_readl_down);
+
+ sched_clk_base = base;
+ sched_clock_register(integrator_read_sched_clock, 16, rate);
+}
+
+static unsigned long timer_reload;
+static void __iomem * clkevt_base;
+
+/*
+ * IRQ handler for the timer
+ */
+static irqreturn_t integrator_timer_interrupt(int irq, void *dev_id)
+{
+ struct clock_event_device *evt = dev_id;
+
+ /* clear the interrupt */
+ writel(1, clkevt_base + TIMER_INTCLR);
+
+ evt->event_handler(evt);
+
+ return IRQ_HANDLED;
+}
+
+static void clkevt_set_mode(enum clock_event_mode mode, struct clock_event_device *evt)
+{
+ u32 ctrl = readl(clkevt_base + TIMER_CTRL) & ~TIMER_CTRL_ENABLE;
+
+ /* Disable timer */
+ writel(ctrl, clkevt_base + TIMER_CTRL);
+
+ switch (mode) {
+ case CLOCK_EVT_MODE_PERIODIC:
+ /* Enable the timer and start the periodic tick */
+ writel(timer_reload, clkevt_base + TIMER_LOAD);
+ ctrl |= TIMER_CTRL_PERIODIC | TIMER_CTRL_ENABLE;
+ writel(ctrl, clkevt_base + TIMER_CTRL);
+ break;
+ case CLOCK_EVT_MODE_ONESHOT:
+ /* Leave the timer disabled, .set_next_event will enable it */
+ ctrl &= ~TIMER_CTRL_PERIODIC;
+ writel(ctrl, clkevt_base + TIMER_CTRL);
+ break;
+ case CLOCK_EVT_MODE_UNUSED:
+ case CLOCK_EVT_MODE_SHUTDOWN:
+ case CLOCK_EVT_MODE_RESUME:
+ default:
+ /* Just leave in disabled state */
+ break;
+ }
+
+}
+
+static int clkevt_set_next_event(unsigned long next, struct clock_event_device *evt)
+{
+ unsigned long ctrl = readl(clkevt_base + TIMER_CTRL);
+
+ writel(ctrl & ~TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
+ writel(next, clkevt_base + TIMER_LOAD);
+ writel(ctrl | TIMER_CTRL_ENABLE, clkevt_base + TIMER_CTRL);
+
+ return 0;
+}
+
+static struct clock_event_device integrator_clockevent = {
+ .name = "timer1",
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
+ .set_mode = clkevt_set_mode,
+ .set_next_event = clkevt_set_next_event,
+ .rating = 300,
+};
+
+static struct irqaction integrator_timer_irq = {
+ .name = "timer",
+ .flags = IRQF_TIMER | IRQF_IRQPOLL,
+ .handler = integrator_timer_interrupt,
+ .dev_id = &integrator_clockevent,
+};
+
+static void integrator_clockevent_init(unsigned long inrate,
+ void __iomem *base, int irq)
+{
+ unsigned long rate = inrate;
+ unsigned int ctrl = 0;
+
+ clkevt_base = base;
+ /* Calculate and program a divisor */
+ if (rate > 0x100000 * HZ) {
+ rate /= 256;
+ ctrl |= TIMER_CTRL_DIV256;
+ } else if (rate > 0x10000 * HZ) {
+ rate /= 16;
+ ctrl |= TIMER_CTRL_DIV16;
+ }
+ timer_reload = rate / HZ;
+ writel(ctrl, clkevt_base + TIMER_CTRL);
+
+ setup_irq(irq, &integrator_timer_irq);
+ clockevents_config_and_register(&integrator_clockevent,
+ rate,
+ 1,
+ 0xffffU);
+}
+
+static void __init integrator_ap_timer_init_of(struct device_node *node)
+{
+ const char *path;
+ void __iomem *base;
+ int err;
+ int irq;
+ struct clk *clk;
+ unsigned long rate;
+ struct device_node *pri_node;
+ struct device_node *sec_node;
+
+ base = of_io_request_and_map(node, 0, "integrator-timer");
+ if (!base)
+ return;
+
+ clk = of_clk_get(node, 0);
+ if (IS_ERR(clk)) {
+ pr_err("No clock for %s\n", node->name);
+ return;
+ }
+ clk_prepare_enable(clk);
+ rate = clk_get_rate(clk);
+ writel(0, base + TIMER_CTRL);
+
+ err = of_property_read_string(of_aliases,
+ "arm,timer-primary", &path);
+ if (WARN_ON(err))
+ return;
+ pri_node = of_find_node_by_path(path);
+ err = of_property_read_string(of_aliases,
+ "arm,timer-secondary", &path);
+ if (WARN_ON(err))
+ return;
+ sec_node = of_find_node_by_path(path);
+
+ if (node == pri_node) {
+ /* The primary timer lacks IRQ, use as clocksource */
+ integrator_clocksource_init(rate, base);
+ return;
+ }
+
+ if (node == sec_node) {
+ /* The secondary timer will drive the clock event */
+ irq = irq_of_parse_and_map(node, 0);
+ integrator_clockevent_init(rate, base, irq);
+ return;
+ }
+
+ pr_info("Timer @%p unused\n", base);
+ clk_disable_unprepare(clk);
+}
+
+CLOCKSOURCE_OF_DECLARE(integrator_ap_timer, "arm,integrator-timer",
+ integrator_ap_timer_init_of);
#include <linux/of_address.h>
#include <linux/sched_clock.h>
-#define MARCO_CLOCK_FREQ 1000000
-
#define SIRFSOC_TIMER_32COUNTER_0_CTRL 0x0000
#define SIRFSOC_TIMER_32COUNTER_1_CTRL 0x0004
#define SIRFSOC_TIMER_MATCH_0 0x0018
#define SIRFSOC_TIMER_REG_CNT 6
+static unsigned long marco_timer_rate;
+
static const u32 sirfsoc_timer_reg_list[SIRFSOC_TIMER_REG_CNT] = {
SIRFSOC_TIMER_WATCHDOG_EN,
SIRFSOC_TIMER_32COUNTER_0_CTRL,
ce->rating = 200;
ce->set_mode = sirfsoc_timer_set_mode;
ce->set_next_event = sirfsoc_timer_set_next_event;
- clockevents_calc_mult_shift(ce, MARCO_CLOCK_FREQ, 60);
+ clockevents_calc_mult_shift(ce, marco_timer_rate, 60);
ce->max_delta_ns = clockevent_delta2ns(-2, ce);
ce->min_delta_ns = clockevent_delta2ns(2, ce);
ce->cpumask = cpumask_of(cpu);
/* initialize the kernel jiffy timer source */
static void __init sirfsoc_marco_timer_init(struct device_node *np)
{
- unsigned long rate;
u32 timer_div;
struct clk *clk;
BUG_ON(clk_prepare_enable(clk));
- rate = clk_get_rate(clk);
-
- BUG_ON(rate < MARCO_CLOCK_FREQ);
- BUG_ON(rate % MARCO_CLOCK_FREQ);
+ marco_timer_rate = clk_get_rate(clk);
- /* Initialize the timer dividers */
- timer_div = rate / MARCO_CLOCK_FREQ - 1;
- writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL);
- writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL);
- writel_relaxed(timer_div << 16, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_1_CTRL);
+ /* timer dividers: 0, not divided */
+ writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_CTRL);
+ writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_0_CTRL);
+ writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_32COUNTER_1_CTRL);
/* Initialize timer counters to 0 */
writel_relaxed(0, sirfsoc_timer_base + SIRFSOC_TIMER_64COUNTER_LOAD_LO);
/* Clear all interrupts */
writel_relaxed(0xFFFF, sirfsoc_timer_base + SIRFSOC_TIMER_INTR_STATUS);
- BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, MARCO_CLOCK_FREQ));
+ BUG_ON(clocksource_register_hz(&sirfsoc_clocksource, marco_timer_rate));
sirfsoc_clockevent_init();
}
#include <linux/cpu.h>
#include <linux/cpu_cooling.h>
#include <linux/cpufreq.h>
+#include <linux/cpufreq-dt.h>
#include <linux/cpumask.h>
#include <linux/err.h>
#include <linux/module.h>
goto try_again;
}
- dev_warn(cpu_dev, "failed to get cpu%d regulator: %ld\n",
- cpu, PTR_ERR(cpu_reg));
+ dev_dbg(cpu_dev, "no regulator for cpu%d: %ld\n",
+ cpu, PTR_ERR(cpu_reg));
}
cpu_clk = clk_get(cpu_dev, NULL);
if (ret == -EPROBE_DEFER)
dev_dbg(cpu_dev, "cpu%d clock not ready, retry\n", cpu);
else
- dev_err(cpu_dev, "failed to get cpu%d clock: %d\n", ret,
- cpu);
+ dev_err(cpu_dev, "failed to get cpu%d clock: %d\n", cpu,
+ ret);
} else {
*cdev = cpu_dev;
*creg = cpu_reg;
static int cpufreq_init(struct cpufreq_policy *policy)
{
+ struct cpufreq_dt_platform_data *pd;
struct cpufreq_frequency_table *freq_table;
struct thermal_cooling_device *cdev;
struct device_node *np;
struct device *cpu_dev;
struct regulator *cpu_reg;
struct clk *cpu_clk;
+ unsigned long min_uV = ~0, max_uV = 0;
unsigned int transition_latency;
int ret;
/* OPPs might be populated at runtime, don't check for error here */
of_init_opp_table(cpu_dev);
- ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
- if (ret) {
- dev_err(cpu_dev, "failed to init cpufreq table: %d\n", ret);
- goto out_put_node;
- }
-
priv = kzalloc(sizeof(*priv), GFP_KERNEL);
if (!priv) {
ret = -ENOMEM;
- goto out_free_table;
+ goto out_put_node;
}
of_property_read_u32(np, "voltage-tolerance", &priv->voltage_tolerance);
transition_latency = CPUFREQ_ETERNAL;
if (!IS_ERR(cpu_reg)) {
- struct dev_pm_opp *opp;
- unsigned long min_uV, max_uV;
- int i;
+ unsigned long opp_freq = 0;
/*
- * OPP is maintained in order of increasing frequency, and
- * freq_table initialised from OPP is therefore sorted in the
- * same order.
+ * Disable any OPPs where the connected regulator isn't able to
+ * provide the specified voltage and record minimum and maximum
+ * voltage levels.
*/
- for (i = 0; freq_table[i].frequency != CPUFREQ_TABLE_END; i++)
- ;
- rcu_read_lock();
- opp = dev_pm_opp_find_freq_exact(cpu_dev,
- freq_table[0].frequency * 1000, true);
- min_uV = dev_pm_opp_get_voltage(opp);
- opp = dev_pm_opp_find_freq_exact(cpu_dev,
- freq_table[i-1].frequency * 1000, true);
- max_uV = dev_pm_opp_get_voltage(opp);
- rcu_read_unlock();
+ while (1) {
+ struct dev_pm_opp *opp;
+ unsigned long opp_uV, tol_uV;
+
+ rcu_read_lock();
+ opp = dev_pm_opp_find_freq_ceil(cpu_dev, &opp_freq);
+ if (IS_ERR(opp)) {
+ rcu_read_unlock();
+ break;
+ }
+ opp_uV = dev_pm_opp_get_voltage(opp);
+ rcu_read_unlock();
+
+ tol_uV = opp_uV * priv->voltage_tolerance / 100;
+ if (regulator_is_supported_voltage(cpu_reg, opp_uV,
+ opp_uV + tol_uV)) {
+ if (opp_uV < min_uV)
+ min_uV = opp_uV;
+ if (opp_uV > max_uV)
+ max_uV = opp_uV;
+ } else {
+ dev_pm_opp_disable(cpu_dev, opp_freq);
+ }
+
+ opp_freq++;
+ }
+
ret = regulator_set_voltage_time(cpu_reg, min_uV, max_uV);
if (ret > 0)
transition_latency += ret * 1000;
}
+ ret = dev_pm_opp_init_cpufreq_table(cpu_dev, &freq_table);
+ if (ret) {
+ pr_err("failed to init cpufreq table: %d\n", ret);
+ goto out_free_priv;
+ }
+
/*
* For now, just loading the cooling device;
* thermal DT code takes care of matching them.
policy->driver_data = priv;
policy->clk = cpu_clk;
- ret = cpufreq_generic_init(policy, freq_table, transition_latency);
- if (ret)
+ ret = cpufreq_table_validate_and_show(policy, freq_table);
+ if (ret) {
+ dev_err(cpu_dev, "%s: invalid frequency table: %d\n", __func__,
+ ret);
goto out_cooling_unregister;
+ }
+
+ policy->cpuinfo.transition_latency = transition_latency;
+
+ pd = cpufreq_get_driver_data();
+ if (!pd || !pd->independent_clocks)
+ cpumask_setall(policy->cpus);
of_node_put(np);
out_cooling_unregister:
cpufreq_cooling_unregister(priv->cdev);
- kfree(priv);
-out_free_table:
dev_pm_opp_free_cpufreq_table(cpu_dev, &freq_table);
+out_free_priv:
+ kfree(priv);
out_put_node:
of_node_put(np);
out_put_reg_clk:
if (!IS_ERR(cpu_reg))
regulator_put(cpu_reg);
+ dt_cpufreq_driver.driver_data = dev_get_platdata(&pdev->dev);
+
ret = cpufreq_register_driver(&dt_cpufreq_driver);
if (ret)
dev_err(cpu_dev, "failed register driver: %d\n", ret);
show_one(cpuinfo_transition_latency, cpuinfo.transition_latency);
show_one(scaling_min_freq, min);
show_one(scaling_max_freq, max);
-show_one(scaling_cur_freq, cur);
+
+static ssize_t show_scaling_cur_freq(
+ struct cpufreq_policy *policy, char *buf)
+{
+ ssize_t ret;
+
+ if (cpufreq_driver && cpufreq_driver->setpolicy && cpufreq_driver->get)
+ ret = sprintf(buf, "%u\n", cpufreq_driver->get(policy->cpu));
+ else
+ ret = sprintf(buf, "%u\n", policy->cur);
+ return ret;
+}
static int cpufreq_set_policy(struct cpufreq_policy *policy,
struct cpufreq_policy *new_policy);
if (ret)
goto err_out_kobj_put;
}
- if (has_target()) {
- ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr);
- if (ret)
- goto err_out_kobj_put;
- }
+
+ ret = sysfs_create_file(&policy->kobj, &scaling_cur_freq.attr);
+ if (ret)
+ goto err_out_kobj_put;
+
if (cpufreq_driver->bios_limit) {
ret = sysfs_create_file(&policy->kobj, &bios_limit.attr);
if (ret)
read_unlock_irqrestore(&cpufreq_driver_lock, flags);
- policy->governor = NULL;
+ if (policy)
+ policy->governor = NULL;
return policy;
}
}
EXPORT_SYMBOL_GPL(cpufreq_get_current_driver);
+/**
+ * cpufreq_get_driver_data - return current driver data
+ *
+ * Return the private data of the currently loaded cpufreq
+ * driver, or NULL if no cpufreq driver is loaded.
+ */
+void *cpufreq_get_driver_data(void)
+{
+ if (cpufreq_driver)
+ return cpufreq_driver->driver_data;
+
+ return NULL;
+}
+EXPORT_SYMBOL_GPL(cpufreq_get_driver_data);
+
/*********************************************************************
* NOTIFIER LISTS INTERFACE *
*********************************************************************/
#include <linux/cpu.h>
#include <linux/err.h>
#include <linux/of.h>
-#include <linux/mailbox.h>
+#include <linux/pl320-ipc.h>
#include <linux/platform_device.h>
#define HB_CPUFREQ_CHANGE_NOTE 0x80000001
return div_s64((int64_t)x << FRAC_BITS, y);
}
+static inline int ceiling_fp(int32_t x)
+{
+ int mask, ret;
+
+ ret = fp_toint(x);
+ mask = (1 << FRAC_BITS) - 1;
+ if (x & mask)
+ ret += 1;
+ return ret;
+}
+
struct sample {
int32_t core_pct_busy;
u64 aperf;
int current_pstate;
int min_pstate;
int max_pstate;
+ int scaling;
int turbo_pstate;
};
int (*get_max)(void);
int (*get_min)(void);
int (*get_turbo)(void);
+ int (*get_scaling)(void);
void (*set)(struct cpudata*, int pstate);
void (*get_vid)(struct cpudata *);
};
static struct perf_limits limits = {
.no_turbo = 0,
+ .turbo_disabled = 0,
.max_perf_pct = 100,
.max_perf = int_tofp(1),
.min_perf_pct = 0,
}
}
+static inline void update_turbo_state(void)
+{
+ u64 misc_en;
+ struct cpudata *cpu;
+
+ cpu = all_cpu_data[0];
+ rdmsrl(MSR_IA32_MISC_ENABLE, misc_en);
+ limits.turbo_disabled =
+ (misc_en & MSR_IA32_MISC_ENABLE_TURBO_DISABLE ||
+ cpu->pstate.max_pstate == cpu->pstate.turbo_pstate);
+}
+
/************************** debugfs begin ************************/
static int pid_param_set(void *data, u64 val)
{
return sprintf(buf, "%u\n", limits.object); \
}
+static ssize_t show_no_turbo(struct kobject *kobj,
+ struct attribute *attr, char *buf)
+{
+ ssize_t ret;
+
+ update_turbo_state();
+ if (limits.turbo_disabled)
+ ret = sprintf(buf, "%u\n", limits.turbo_disabled);
+ else
+ ret = sprintf(buf, "%u\n", limits.no_turbo);
+
+ return ret;
+}
+
static ssize_t store_no_turbo(struct kobject *a, struct attribute *b,
const char *buf, size_t count)
{
ret = sscanf(buf, "%u", &input);
if (ret != 1)
return -EINVAL;
- limits.no_turbo = clamp_t(int, input, 0 , 1);
+
+ update_turbo_state();
if (limits.turbo_disabled) {
pr_warn("Turbo disabled by BIOS or unavailable on processor\n");
- limits.no_turbo = limits.turbo_disabled;
+ return -EPERM;
}
+ limits.no_turbo = clamp_t(int, input, 0, 1);
+
return count;
}
return count;
}
-show_one(no_turbo, no_turbo);
show_one(max_perf_pct, max_perf_pct);
show_one(min_perf_pct, min_perf_pct);
cpudata->vid.ratio);
vid_fp = clamp_t(int32_t, vid_fp, cpudata->vid.min, cpudata->vid.max);
- vid = fp_toint(vid_fp);
+ vid = ceiling_fp(vid_fp);
if (pstate > cpudata->pstate.max_pstate)
vid = cpudata->vid.turbo;
wrmsrl(MSR_IA32_PERF_CTL, val);
}
+#define BYT_BCLK_FREQS 5
+static int byt_freq_table[BYT_BCLK_FREQS] = { 833, 1000, 1333, 1167, 800};
+
+static int byt_get_scaling(void)
+{
+ u64 value;
+ int i;
+
+ rdmsrl(MSR_FSB_FREQ, value);
+ i = value & 0x3;
+
+ BUG_ON(i > BYT_BCLK_FREQS);
+
+ return byt_freq_table[i] * 100;
+}
+
static void byt_get_vid(struct cpudata *cpudata)
{
u64 value;
return ret;
}
+static inline int core_get_scaling(void)
+{
+ return 100000;
+}
+
static void core_set_pstate(struct cpudata *cpudata, int pstate)
{
u64 val;
.get_max = core_get_max_pstate,
.get_min = core_get_min_pstate,
.get_turbo = core_get_turbo_pstate,
+ .get_scaling = core_get_scaling,
.set = core_set_pstate,
},
};
.get_min = byt_get_min_pstate,
.get_turbo = byt_get_turbo_pstate,
.set = byt_set_pstate,
+ .get_scaling = byt_get_scaling,
.get_vid = byt_get_vid,
},
};
int max_perf_adj;
int min_perf;
- if (limits.no_turbo)
+ if (limits.no_turbo || limits.turbo_disabled)
max_perf = cpu->pstate.max_pstate;
max_perf_adj = fp_toint(mul_fp(int_tofp(max_perf), limits.max_perf));
{
int max_perf, min_perf;
+ update_turbo_state();
+
intel_pstate_get_min_max(cpu, &min_perf, &max_perf);
pstate = clamp_t(int, pstate, min_perf, max_perf);
if (pstate == cpu->pstate.current_pstate)
return;
- trace_cpu_frequency(pstate * 100000, cpu->cpu);
+ trace_cpu_frequency(pstate * cpu->pstate.scaling, cpu->cpu);
cpu->pstate.current_pstate = pstate;
cpu->pstate.min_pstate = pstate_funcs.get_min();
cpu->pstate.max_pstate = pstate_funcs.get_max();
cpu->pstate.turbo_pstate = pstate_funcs.get_turbo();
+ cpu->pstate.scaling = pstate_funcs.get_scaling();
if (pstate_funcs.get_vid)
pstate_funcs.get_vid(cpu);
core_pct = div64_u64(core_pct, int_tofp(sample->mperf));
sample->freq = fp_toint(
- mul_fp(int_tofp(cpu->pstate.max_pstate * 1000), core_pct));
+ mul_fp(int_tofp(
+ cpu->pstate.max_pstate * cpu->pstate.scaling / 100),
+ core_pct));
sample->core_pct_busy = (int32_t)core_pct;
}
{
struct cpudata *cpu;
- all_cpu_data[cpunum] = kzalloc(sizeof(struct cpudata), GFP_KERNEL);
+ if (!all_cpu_data[cpunum])
+ all_cpu_data[cpunum] = kzalloc(sizeof(struct cpudata),
+ GFP_KERNEL);
if (!all_cpu_data[cpunum])
return -ENOMEM;
if (policy->policy == CPUFREQ_POLICY_PERFORMANCE) {
limits.min_perf_pct = 100;
limits.min_perf = int_tofp(1);
+ limits.max_policy_pct = 100;
limits.max_perf_pct = 100;
limits.max_perf = int_tofp(1);
- limits.no_turbo = limits.turbo_disabled;
+ limits.no_turbo = 0;
return 0;
}
limits.min_perf_pct = (policy->min * 100) / policy->cpuinfo.max_freq;
del_timer_sync(&all_cpu_data[cpu_num]->timer);
intel_pstate_set_pstate(cpu, cpu->pstate.min_pstate);
- kfree(all_cpu_data[cpu_num]);
- all_cpu_data[cpu_num] = NULL;
}
static int intel_pstate_cpu_init(struct cpufreq_policy *policy)
{
struct cpudata *cpu;
int rc;
- u64 misc_en;
rc = intel_pstate_init_cpu(policy->cpu);
if (rc)
cpu = all_cpu_data[policy->cpu];
- rdmsrl(MSR_IA32_MISC_ENABLE, misc_en);
- if (misc_en & MSR_IA32_MISC_ENABLE_TURBO_DISABLE ||
- cpu->pstate.max_pstate == cpu->pstate.turbo_pstate) {
- limits.turbo_disabled = 1;
- limits.no_turbo = 1;
- }
if (limits.min_perf_pct == 100 && limits.max_perf_pct == 100)
policy->policy = CPUFREQ_POLICY_PERFORMANCE;
else
policy->policy = CPUFREQ_POLICY_POWERSAVE;
- policy->min = cpu->pstate.min_pstate * 100000;
- policy->max = cpu->pstate.turbo_pstate * 100000;
+ policy->min = cpu->pstate.min_pstate * cpu->pstate.scaling;
+ policy->max = cpu->pstate.turbo_pstate * cpu->pstate.scaling;
/* cpuinfo and default policy values */
- policy->cpuinfo.min_freq = cpu->pstate.min_pstate * 100000;
- policy->cpuinfo.max_freq = cpu->pstate.turbo_pstate * 100000;
+ policy->cpuinfo.min_freq = cpu->pstate.min_pstate * cpu->pstate.scaling;
+ policy->cpuinfo.max_freq =
+ cpu->pstate.turbo_pstate * cpu->pstate.scaling;
policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
cpumask_set_cpu(policy->cpu, policy->cpus);
pstate_funcs.get_max = funcs->get_max;
pstate_funcs.get_min = funcs->get_min;
pstate_funcs.get_turbo = funcs->get_turbo;
+ pstate_funcs.get_scaling = funcs->get_scaling;
pstate_funcs.set = funcs->set;
pstate_funcs.get_vid = funcs->get_vid;
}
#
config MIPS_CPS_CPUIDLE
bool "CPU Idle driver for MIPS CPS platforms"
- depends on CPU_IDLE
+ depends on CPU_IDLE && MIPS_CPS
depends on SYS_SUPPORTS_MIPS_CPS
select ARCH_NEEDS_CPU_IDLE_COUPLED if MIPS_MT
select GENERIC_CLOCKEVENTS_BROADCAST if SMP
int nr_idle_states = 1; /* Snooze */
int dt_idle_states;
const __be32 *idle_state_flags;
- u32 len_flags, flags;
+ const __be32 *idle_state_latency;
+ u32 len_flags, flags, latency_ns;
int i;
/* Currently we have snooze statically defined */
return nr_idle_states;
}
+ idle_state_latency = of_get_property(power_mgt,
+ "ibm,cpu-idle-state-latencies-ns", NULL);
+ if (!idle_state_latency) {
+ pr_warn("DT-PowerMgmt: missing ibm,cpu-idle-state-latencies-ns\n");
+ return nr_idle_states;
+ }
+
dt_idle_states = len_flags / sizeof(u32);
for (i = 0; i < dt_idle_states; i++) {
flags = be32_to_cpu(idle_state_flags[i]);
+
+ /* Cpuidle accepts exit_latency in us and we estimate
+ * target residency to be 10x exit_latency
+ */
+ latency_ns = be32_to_cpu(idle_state_latency[i]);
if (flags & IDLE_USE_INST_NAP) {
/* Add NAP state */
strcpy(powernv_states[nr_idle_states].name, "Nap");
strcpy(powernv_states[nr_idle_states].desc, "Nap");
powernv_states[nr_idle_states].flags = CPUIDLE_FLAG_TIME_VALID;
- powernv_states[nr_idle_states].exit_latency = 10;
- powernv_states[nr_idle_states].target_residency = 100;
+ powernv_states[nr_idle_states].exit_latency =
+ ((unsigned int)latency_ns) / 1000;
+ powernv_states[nr_idle_states].target_residency =
+ ((unsigned int)latency_ns / 100);
powernv_states[nr_idle_states].enter = &nap_loop;
nr_idle_states++;
}
strcpy(powernv_states[nr_idle_states].desc, "FastSleep");
powernv_states[nr_idle_states].flags =
CPUIDLE_FLAG_TIME_VALID | CPUIDLE_FLAG_TIMER_STOP;
- powernv_states[nr_idle_states].exit_latency = 300;
- powernv_states[nr_idle_states].target_residency = 1000000;
+ powernv_states[nr_idle_states].exit_latency =
+ ((unsigned int)latency_ns) / 1000;
+ powernv_states[nr_idle_states].target_residency =
+ ((unsigned int)latency_ns / 100);
powernv_states[nr_idle_states].enter = &fastsleep_loop;
nr_idle_states++;
}
u32 *desc;
struct split_key_result result;
dma_addr_t dma_addr_in, dma_addr_out;
- int ret = 0;
+ int ret = -ENOMEM;
desc = kmalloc(CAAM_CMD_SZ * 6 + CAAM_PTR_SZ * 2, GFP_KERNEL | GFP_DMA);
if (!desc) {
dev_err(jrdev, "unable to allocate key input memory\n");
- return -ENOMEM;
+ return ret;
}
- init_job_desc(desc, 0);
-
dma_addr_in = dma_map_single(jrdev, (void *)key_in, keylen,
DMA_TO_DEVICE);
if (dma_mapping_error(jrdev, dma_addr_in)) {
dev_err(jrdev, "unable to map key input memory\n");
- kfree(desc);
- return -ENOMEM;
+ goto out_free;
}
+
+ dma_addr_out = dma_map_single(jrdev, key_out, split_key_pad_len,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(jrdev, dma_addr_out)) {
+ dev_err(jrdev, "unable to map key output memory\n");
+ goto out_unmap_in;
+ }
+
+ init_job_desc(desc, 0);
append_key(desc, dma_addr_in, keylen, CLASS_2 | KEY_DEST_CLASS_REG);
/* Sets MDHA up into an HMAC-INIT */
* FIFO_STORE with the explicit split-key content store
* (0x26 output type)
*/
- dma_addr_out = dma_map_single(jrdev, key_out, split_key_pad_len,
- DMA_FROM_DEVICE);
- if (dma_mapping_error(jrdev, dma_addr_out)) {
- dev_err(jrdev, "unable to map key output memory\n");
- kfree(desc);
- return -ENOMEM;
- }
append_fifo_store(desc, dma_addr_out, split_key_len,
LDST_CLASS_2_CCB | FIFOST_TYPE_SPLIT_KEK);
dma_unmap_single(jrdev, dma_addr_out, split_key_pad_len,
DMA_FROM_DEVICE);
+out_unmap_in:
dma_unmap_single(jrdev, dma_addr_in, keylen, DMA_TO_DEVICE);
-
+out_free:
kfree(desc);
-
return ret;
}
EXPORT_SYMBOL(gen_split_key);
struct dentry *debugfs_dir;
struct list_head list;
struct module *owner;
- uint8_t accel_id;
- uint8_t numa_node;
struct adf_accel_pci accel_pci_dev;
+ uint8_t accel_id;
} __packed;
#endif
WRITE_CSR_RING_BASE(csr_addr, bank_num, i, 0);
ring = &bank->rings[i];
if (hw_data->tx_rings_mask & (1 << i)) {
- ring->inflights = kzalloc_node(sizeof(atomic_t),
- GFP_KERNEL,
- accel_dev->numa_node);
+ ring->inflights =
+ kzalloc_node(sizeof(atomic_t),
+ GFP_KERNEL,
+ dev_to_node(&GET_DEV(accel_dev)));
if (!ring->inflights)
goto err;
} else {
int i, ret;
etr_data = kzalloc_node(sizeof(*etr_data), GFP_KERNEL,
- accel_dev->numa_node);
+ dev_to_node(&GET_DEV(accel_dev)));
if (!etr_data)
return -ENOMEM;
num_banks = GET_MAX_BANKS(accel_dev);
size = num_banks * sizeof(struct adf_etr_bank_data);
- etr_data->banks = kzalloc_node(size, GFP_KERNEL, accel_dev->numa_node);
+ etr_data->banks = kzalloc_node(size, GFP_KERNEL,
+ dev_to_node(&GET_DEV(accel_dev)));
if (!etr_data->banks) {
ret = -ENOMEM;
goto err_bank;
if (unlikely(!n))
return -EINVAL;
- bufl = kmalloc_node(sz, GFP_ATOMIC, inst->accel_dev->numa_node);
+ bufl = kmalloc_node(sz, GFP_ATOMIC,
+ dev_to_node(&GET_DEV(inst->accel_dev)));
if (unlikely(!bufl))
return -ENOMEM;
goto err;
for_each_sg(assoc, sg, assoc_n, i) {
+ if (!sg->length)
+ continue;
bufl->bufers[bufs].addr = dma_map_single(dev,
sg_virt(sg),
sg->length,
struct qat_alg_buf *bufers;
buflout = kmalloc_node(sz, GFP_ATOMIC,
- inst->accel_dev->numa_node);
+ dev_to_node(&GET_DEV(inst->accel_dev)));
if (unlikely(!buflout))
goto err;
bloutp = dma_map_single(dev, buflout, sz, DMA_TO_DEVICE);
list_for_each(itr, adf_devmgr_get_head()) {
accel_dev = list_entry(itr, struct adf_accel_dev, list);
- if (accel_dev->numa_node == node && adf_dev_started(accel_dev))
+ if ((node == dev_to_node(&GET_DEV(accel_dev)) ||
+ dev_to_node(&GET_DEV(accel_dev)) < 0)
+ && adf_dev_started(accel_dev))
break;
accel_dev = NULL;
}
if (!accel_dev) {
- pr_err("QAT: Could not find device on give node\n");
+ pr_err("QAT: Could not find device on node %d\n", node);
accel_dev = adf_devmgr_get_first();
}
if (!accel_dev || !adf_dev_started(accel_dev))
for (i = 0; i < num_inst; i++) {
inst = kzalloc_node(sizeof(*inst), GFP_KERNEL,
- accel_dev->numa_node);
+ dev_to_node(&GET_DEV(accel_dev)));
if (!inst)
goto err;
uint64_t reg_val;
admin = kzalloc_node(sizeof(*accel_dev->admin), GFP_KERNEL,
- accel_dev->numa_node);
+ dev_to_node(&GET_DEV(accel_dev)));
if (!admin)
return -ENOMEM;
admin->virt_addr = dma_zalloc_coherent(&GET_DEV(accel_dev), PAGE_SIZE,
kfree(accel_dev);
}
-static uint8_t adf_get_dev_node_id(struct pci_dev *pdev)
-{
- unsigned int bus_per_cpu = 0;
- struct cpuinfo_x86 *c = &cpu_data(num_online_cpus() - 1);
-
- if (!c->phys_proc_id)
- return 0;
-
- bus_per_cpu = 256 / (c->phys_proc_id + 1);
-
- if (bus_per_cpu != 0)
- return pdev->bus->number / bus_per_cpu;
- return 0;
-}
-
static int qat_dev_start(struct adf_accel_dev *accel_dev)
{
int cpus = num_online_cpus();
void __iomem *pmisc_bar_addr = NULL;
char name[ADF_DEVICE_NAME_LENGTH];
unsigned int i, bar_nr;
- uint8_t node;
int ret;
switch (ent->device) {
return -ENODEV;
}
- node = adf_get_dev_node_id(pdev);
- accel_dev = kzalloc_node(sizeof(*accel_dev), GFP_KERNEL, node);
+ if (num_possible_nodes() > 1 && dev_to_node(&pdev->dev) < 0) {
+ /* If the accelerator is connected to a node with no memory
+ * there is no point in using the accelerator since the remote
+ * memory transaction will be very slow. */
+ dev_err(&pdev->dev, "Invalid NUMA configuration.\n");
+ return -EINVAL;
+ }
+
+ accel_dev = kzalloc_node(sizeof(*accel_dev), GFP_KERNEL,
+ dev_to_node(&pdev->dev));
if (!accel_dev)
return -ENOMEM;
- accel_dev->numa_node = node;
INIT_LIST_HEAD(&accel_dev->crypto_list);
/* Add accel device to accel table.
accel_dev->owner = THIS_MODULE;
/* Allocate and configure device configuration structure */
- hw_data = kzalloc_node(sizeof(*hw_data), GFP_KERNEL, node);
+ hw_data = kzalloc_node(sizeof(*hw_data), GFP_KERNEL,
+ dev_to_node(&pdev->dev));
if (!hw_data) {
ret = -ENOMEM;
goto out_err;
uint32_t msix_num_entries = hw_data->num_banks + 1;
entries = kzalloc_node(msix_num_entries * sizeof(*entries),
- GFP_KERNEL, accel_dev->numa_node);
+ GFP_KERNEL, dev_to_node(&GET_DEV(accel_dev)));
if (!entries)
return -ENOMEM;
}
EXPORT_SYMBOL(edma_filter_fn);
-static struct platform_device *pdev0, *pdev1;
-
-static const struct platform_device_info edma_dev_info0 = {
- .name = "edma-dma-engine",
- .id = 0,
- .dma_mask = DMA_BIT_MASK(32),
-};
-
-static const struct platform_device_info edma_dev_info1 = {
- .name = "edma-dma-engine",
- .id = 1,
- .dma_mask = DMA_BIT_MASK(32),
-};
-
static int edma_init(void)
{
- int ret = platform_driver_register(&edma_driver);
-
- if (ret == 0) {
- pdev0 = platform_device_register_full(&edma_dev_info0);
- if (IS_ERR(pdev0)) {
- platform_driver_unregister(&edma_driver);
- ret = PTR_ERR(pdev0);
- goto out;
- }
- }
-
- if (!of_have_populated_dt() && EDMA_CTLRS == 2) {
- pdev1 = platform_device_register_full(&edma_dev_info1);
- if (IS_ERR(pdev1)) {
- platform_driver_unregister(&edma_driver);
- platform_device_unregister(pdev0);
- ret = PTR_ERR(pdev1);
- }
- }
-
-out:
- return ret;
+ return platform_driver_register(&edma_driver);
}
subsys_initcall(edma_init);
static void __exit edma_exit(void)
{
- platform_device_unregister(pdev0);
- if (pdev1)
- platform_device_unregister(pdev1);
platform_driver_unregister(&edma_driver);
}
module_exit(edma_exit);
#define DMAC_MODE_NS (1 << 0)
unsigned int mode;
unsigned int data_bus_width:10; /* In number of bits */
- unsigned int data_buf_dep:10;
+ unsigned int data_buf_dep:11;
unsigned int num_chan:4;
unsigned int num_peri:6;
u32 peri_ns;
int burst_len;
burst_len = pl330->pcfg.data_bus_width / 8;
- burst_len *= pl330->pcfg.data_buf_dep;
+ burst_len *= pl330->pcfg.data_buf_dep / pl330->pcfg.num_chan;
burst_len >>= desc->rqcfg.brst_size;
/* src/dst_burst_len can't be more than 16 */
/* Select max possible burst size */
burst = pl330->pcfg.data_bus_width / 8;
- while (burst > 1) {
- if (!(len % burst))
- break;
+ /*
+ * Make sure we use a burst size that aligns with all the memcpy
+ * parameters because our DMA programming algorithm doesn't cope with
+ * transfers which straddle an entry in the DMA device's MFIFO.
+ */
+ while ((src | dst | len) & (burst - 1))
burst /= 2;
- }
desc->rqcfg.brst_size = 0;
while (burst != (1 << desc->rqcfg.brst_size))
desc->rqcfg.brst_size++;
+ /*
+ * If burst size is smaller than bus width then make sure we only
+ * transfer one at a time to avoid a burst stradling an MFIFO entry.
+ */
+ if (desc->rqcfg.brst_size * 8 < pl330->pcfg.data_bus_width)
+ desc->rqcfg.brst_len = 1;
+
desc->rqcfg.brst_len = get_burst_len(desc, len);
desc->txd.flags = flags;
dev_info(&adev->dev,
- "Loaded driver for PL330 DMAC-%d\n", adev->periphid);
+ "Loaded driver for PL330 DMAC-%x\n", adev->periphid);
dev_info(&adev->dev,
"\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n",
pcfg->data_buf_dep, pcfg->data_bus_width / 8, pcfg->num_chan,
readl(pchan->base + DMA_CHAN_CUR_PARA));
}
-static inline int convert_burst(u32 maxburst, u8 *burst)
+static inline s8 convert_burst(u32 maxburst)
{
switch (maxburst) {
case 1:
- *burst = 0;
- break;
+ return 0;
case 8:
- *burst = 2;
- break;
+ return 2;
default:
return -EINVAL;
}
-
- return 0;
}
-static inline int convert_buswidth(enum dma_slave_buswidth addr_width, u8 *width)
+static inline s8 convert_buswidth(enum dma_slave_buswidth addr_width)
{
if ((addr_width < DMA_SLAVE_BUSWIDTH_1_BYTE) ||
(addr_width > DMA_SLAVE_BUSWIDTH_4_BYTES))
return -EINVAL;
- *width = addr_width >> 1;
- return 0;
+ return addr_width >> 1;
}
static void *sun6i_dma_lli_add(struct sun6i_dma_lli *prev,
struct dma_slave_config *config)
{
u8 src_width, dst_width, src_burst, dst_burst;
- int ret;
if (!config)
return -EINVAL;
- ret = convert_burst(config->src_maxburst, &src_burst);
- if (ret)
- return ret;
+ src_burst = convert_burst(config->src_maxburst);
+ if (src_burst)
+ return src_burst;
- ret = convert_burst(config->dst_maxburst, &dst_burst);
- if (ret)
- return ret;
+ dst_burst = convert_burst(config->dst_maxburst);
+ if (dst_burst)
+ return dst_burst;
- ret = convert_buswidth(config->src_addr_width, &src_width);
- if (ret)
- return ret;
+ src_width = convert_buswidth(config->src_addr_width);
+ if (src_width)
+ return src_width;
- ret = convert_buswidth(config->dst_addr_width, &dst_width);
- if (ret)
- return ret;
+ dst_width = convert_buswidth(config->dst_addr_width);
+ if (dst_width)
+ return dst_width;
lli->cfg = DMA_CHAN_CFG_SRC_BURST(src_burst) |
DMA_CHAN_CFG_SRC_WIDTH(src_width) |
{
struct sun6i_dma_dev *sdev = to_sun6i_dma_dev(chan->device);
struct sun6i_vchan *vchan = to_sun6i_vchan(chan);
- struct dma_slave_config *sconfig = &vchan->cfg;
struct sun6i_dma_lli *v_lli;
struct sun6i_desc *txd;
dma_addr_t p_lli;
- int ret;
+ s8 burst, width;
dev_dbg(chan2dev(chan),
"%s; chan: %d, dest: %pad, src: %pad, len: %zu. flags: 0x%08lx\n",
goto err_txd_free;
}
- ret = sun6i_dma_cfg_lli(v_lli, src, dest, len, sconfig);
- if (ret)
- goto err_dma_free;
+ v_lli->src = src;
+ v_lli->dst = dest;
+ v_lli->len = len;
+ v_lli->para = NORMAL_WAIT;
+ burst = convert_burst(8);
+ width = convert_buswidth(DMA_SLAVE_BUSWIDTH_4_BYTES);
v_lli->cfg |= DMA_CHAN_CFG_SRC_DRQ(DRQ_SDRAM) |
DMA_CHAN_CFG_DST_DRQ(DRQ_SDRAM) |
DMA_CHAN_CFG_DST_LINEAR_MODE |
- DMA_CHAN_CFG_SRC_LINEAR_MODE;
+ DMA_CHAN_CFG_SRC_LINEAR_MODE |
+ DMA_CHAN_CFG_SRC_BURST(burst) |
+ DMA_CHAN_CFG_SRC_WIDTH(width) |
+ DMA_CHAN_CFG_DST_BURST(burst) |
+ DMA_CHAN_CFG_DST_WIDTH(width);
sun6i_dma_lli_add(NULL, v_lli, p_lli, txd);
return vchan_tx_prep(&vchan->vc, &txd->vd, flags);
-err_dma_free:
- dma_pool_free(sdev->pool, v_lli, p_lli);
err_txd_free:
kfree(txd);
return NULL;
sdc->slave.device_prep_dma_memcpy = sun6i_dma_prep_dma_memcpy;
sdc->slave.device_control = sun6i_dma_control;
sdc->slave.chancnt = NR_MAX_VCHANS;
+ sdc->slave.copy_align = 4;
sdc->slave.dev = &pdev->dev;
has been initialized.
config EDAC_MCE_INJ
- tristate "Simple MCE injection interface over /sysfs"
- depends on EDAC_DECODE_MCE
+ tristate "Simple MCE injection interface"
+ depends on EDAC_DECODE_MCE && DEBUG_FS
default n
help
- This is a simple interface to inject MCEs over /sysfs and test
- the MCE decoding code in EDAC.
+ This is a simple debugfs interface to inject MCEs and test different
+ aspects of the MCE handling code.
- This is currently AMD-only.
+ WARNING: Do not even assume this interface is staying stable!
config EDAC_MM_EDAC
tristate "Main Memory EDAC (Error Detection And Correction) reporting"
In doubt, say 'Y'.
config EDAC_AMD64
- tristate "AMD64 (Opteron, Athlon64) K8, F10h"
- depends on EDAC_MM_EDAC && AMD_NB && X86_64 && EDAC_DECODE_MCE
+ tristate "AMD64 (Opteron, Athlon64)"
+ depends on EDAC_MM_EDAC && AMD_NB && EDAC_DECODE_MCE
help
Support for error detection and correction of DRAM ECC errors on
- the AMD64 families of memory controllers (K8 and F10h)
+ the AMD64 families (>= K8) of memory controllers.
config EDAC_AMD64_ERROR_INJECTION
bool "Sysfs HW Error injection facilities"
obj-$(CONFIG_EDAC) := edac_stub.o
obj-$(CONFIG_EDAC_MM_EDAC) += edac_core.o
-edac_core-y := edac_mc.o edac_device.o edac_mc_sysfs.o edac_pci_sysfs.o
+edac_core-y := edac_mc.o edac_device.o edac_mc_sysfs.o
edac_core-y += edac_module.o edac_device_sysfs.o
ifdef CONFIG_PCI
{
edac_dbg(1, "F2x%d90 (DRAM Cfg Low): 0x%08x\n", chan, dclr);
- edac_dbg(1, " DIMM type: %sbuffered; all DIMMs support ECC: %s\n",
- (dclr & BIT(16)) ? "un" : "",
- (dclr & BIT(19)) ? "yes" : "no");
+ if (pvt->dram_type == MEM_LRDDR3) {
+ u32 dcsm = pvt->csels[chan].csmasks[0];
+ /*
+ * It's assumed all LRDIMMs in a DCT are going to be of
+ * same 'type' until proven otherwise. So, use a cs
+ * value of '0' here to get dcsm value.
+ */
+ edac_dbg(1, " LRDIMM %dx rank multiply\n", (dcsm & 0x3));
+ }
+
+ edac_dbg(1, "All DIMMs support ECC:%s\n",
+ (dclr & BIT(19)) ? "yes" : "no");
+
edac_dbg(1, " PAR/ERR parity: %s\n",
(dclr & BIT(8)) ? "enabled" : "disabled");
if (pvt->fam == 0xf && pvt->ext_model < K8_REV_F) {
pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 8;
pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 8;
- } else if (pvt->fam == 0x15 && pvt->model >= 0x30) {
+ } else if (pvt->fam == 0x15 && pvt->model == 0x30) {
pvt->csels[0].b_cnt = pvt->csels[1].b_cnt = 4;
pvt->csels[0].m_cnt = pvt->csels[1].m_cnt = 2;
} else {
}
}
-static enum mem_type determine_memory_type(struct amd64_pvt *pvt, int cs)
+static void determine_memory_type(struct amd64_pvt *pvt)
{
- enum mem_type type;
+ u32 dram_ctrl, dcsm;
- /* F15h supports only DDR3 */
- if (pvt->fam >= 0x15)
- type = (pvt->dclr0 & BIT(16)) ? MEM_DDR3 : MEM_RDDR3;
- else if (pvt->fam == 0x10 || pvt->ext_model >= K8_REV_F) {
+ switch (pvt->fam) {
+ case 0xf:
+ if (pvt->ext_model >= K8_REV_F)
+ goto ddr3;
+
+ pvt->dram_type = (pvt->dclr0 & BIT(18)) ? MEM_DDR : MEM_RDDR;
+ return;
+
+ case 0x10:
if (pvt->dchr0 & DDR3_MODE)
- type = (pvt->dclr0 & BIT(16)) ? MEM_DDR3 : MEM_RDDR3;
+ goto ddr3;
+
+ pvt->dram_type = (pvt->dclr0 & BIT(16)) ? MEM_DDR2 : MEM_RDDR2;
+ return;
+
+ case 0x15:
+ if (pvt->model < 0x60)
+ goto ddr3;
+
+ /*
+ * Model 0x60h needs special handling:
+ *
+ * We use a Chip Select value of '0' to obtain dcsm.
+ * Theoretically, it is possible to populate LRDIMMs of different
+ * 'Rank' value on a DCT. But this is not the common case. So,
+ * it's reasonable to assume all DIMMs are going to be of same
+ * 'type' until proven otherwise.
+ */
+ amd64_read_dct_pci_cfg(pvt, 0, DRAM_CONTROL, &dram_ctrl);
+ dcsm = pvt->csels[0].csmasks[0];
+
+ if (((dram_ctrl >> 8) & 0x7) == 0x2)
+ pvt->dram_type = MEM_DDR4;
+ else if (pvt->dclr0 & BIT(16))
+ pvt->dram_type = MEM_DDR3;
+ else if (dcsm & 0x3)
+ pvt->dram_type = MEM_LRDDR3;
else
- type = (pvt->dclr0 & BIT(16)) ? MEM_DDR2 : MEM_RDDR2;
- } else {
- type = (pvt->dclr0 & BIT(18)) ? MEM_DDR : MEM_RDDR;
- }
+ pvt->dram_type = MEM_RDDR3;
- amd64_info("CS%d: %s\n", cs, edac_mem_types[type]);
+ return;
- return type;
+ case 0x16:
+ goto ddr3;
+
+ default:
+ WARN(1, KERN_ERR "%s: Family??? 0x%x\n", __func__, pvt->fam);
+ pvt->dram_type = MEM_EMPTY;
+ }
+ return;
+
+ddr3:
+ pvt->dram_type = (pvt->dclr0 & BIT(16)) ? MEM_DDR3 : MEM_RDDR3;
}
/* Get the number of DCT channels the memory controller is using. */
if (WARN_ON(!nb))
return;
- pci_func = (pvt->model == 0x30) ? PCI_DEVICE_ID_AMD_15H_M30H_NB_F1
- : PCI_DEVICE_ID_AMD_15H_NB_F1;
+ if (pvt->model == 0x60)
+ pci_func = PCI_DEVICE_ID_AMD_15H_M60H_NB_F1;
+ else if (pvt->model == 0x30)
+ pci_func = PCI_DEVICE_ID_AMD_15H_M30H_NB_F1;
+ else
+ pci_func = PCI_DEVICE_ID_AMD_15H_NB_F1;
f1 = pci_get_related_function(nb->misc->vendor, pci_func, nb->misc);
if (WARN_ON(!f1))
}
static int k8_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
- unsigned cs_mode)
+ unsigned cs_mode, int cs_mask_nr)
{
u32 dclr = dct ? pvt->dclr1 : pvt->dclr0;
return cs_size;
}
+static int ddr3_lrdimm_cs_size(unsigned i, unsigned rank_multiply)
+{
+ unsigned shift = 0;
+ int cs_size = 0;
+
+ if (i < 4 || i == 6)
+ cs_size = -1;
+ else if (i == 12)
+ shift = 7;
+ else if (!(i & 0x1))
+ shift = i >> 1;
+ else
+ shift = (i + 1) >> 1;
+
+ if (cs_size != -1)
+ cs_size = rank_multiply * (128 << shift);
+
+ return cs_size;
+}
+
+static int ddr4_cs_size(unsigned i)
+{
+ int cs_size = 0;
+
+ if (i == 0)
+ cs_size = -1;
+ else if (i == 1)
+ cs_size = 1024;
+ else
+ /* Min cs_size = 1G */
+ cs_size = 1024 * (1 << (i >> 1));
+
+ return cs_size;
+}
+
static int f10_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
- unsigned cs_mode)
+ unsigned cs_mode, int cs_mask_nr)
{
u32 dclr = dct ? pvt->dclr1 : pvt->dclr0;
* F15h supports only 64bit DCT interfaces
*/
static int f15_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
- unsigned cs_mode)
+ unsigned cs_mode, int cs_mask_nr)
{
WARN_ON(cs_mode > 12);
return ddr3_cs_size(cs_mode, false);
}
+/* F15h M60h supports DDR4 mapping as well.. */
+static int f15_m60h_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
+ unsigned cs_mode, int cs_mask_nr)
+{
+ int cs_size;
+ u32 dcsm = pvt->csels[dct].csmasks[cs_mask_nr];
+
+ WARN_ON(cs_mode > 12);
+
+ if (pvt->dram_type == MEM_DDR4) {
+ if (cs_mode > 9)
+ return -1;
+
+ cs_size = ddr4_cs_size(cs_mode);
+ } else if (pvt->dram_type == MEM_LRDDR3) {
+ unsigned rank_multiply = dcsm & 0xf;
+
+ if (rank_multiply == 3)
+ rank_multiply = 4;
+ cs_size = ddr3_lrdimm_cs_size(cs_mode, rank_multiply);
+ } else {
+ /* Minimum cs size is 512mb for F15hM60h*/
+ if (cs_mode == 0x1)
+ return -1;
+
+ cs_size = ddr3_cs_size(cs_mode, false);
+ }
+
+ return cs_size;
+}
+
/*
* F16h and F15h model 30h have only limited cs_modes.
*/
static int f16_dbam_to_chip_select(struct amd64_pvt *pvt, u8 dct,
- unsigned cs_mode)
+ unsigned cs_mode, int cs_mask_nr)
{
WARN_ON(cs_mode > 12);
size0 = 0;
if (dcsb[dimm*2] & DCSB_CS_ENABLE)
+ /* For f15m60h, need multiplier for LRDIMM cs_size
+ * calculation. We pass 'dimm' value to the dbam_to_cs
+ * mapper so we can find the multiplier from the
+ * corresponding DCSM.
+ */
size0 = pvt->ops->dbam_to_cs(pvt, ctrl,
- DBAM_DIMM(dimm, dbam));
+ DBAM_DIMM(dimm, dbam),
+ dimm);
size1 = 0;
if (dcsb[dimm*2 + 1] & DCSB_CS_ENABLE)
size1 = pvt->ops->dbam_to_cs(pvt, ctrl,
- DBAM_DIMM(dimm, dbam));
+ DBAM_DIMM(dimm, dbam),
+ dimm);
amd64_info(EDAC_MC ": %d: %5dMB %d: %5dMB\n",
dimm * 2, size0,
.dbam_to_cs = f16_dbam_to_chip_select,
}
},
+ [F15_M60H_CPUS] = {
+ .ctl_name = "F15h_M60h",
+ .f1_id = PCI_DEVICE_ID_AMD_15H_M60H_NB_F1,
+ .f3_id = PCI_DEVICE_ID_AMD_15H_M60H_NB_F3,
+ .ops = {
+ .early_channel_count = f1x_early_channel_count,
+ .map_sysaddr_to_csrow = f1x_map_sysaddr_to_csrow,
+ .dbam_to_cs = f15_m60h_dbam_to_chip_select,
+ }
+ },
[F16_CPUS] = {
.ctl_name = "F16h",
.f1_id = PCI_DEVICE_ID_AMD_16H_NB_F1,
}
pvt->ecc_sym_sz = 4;
+ determine_memory_type(pvt);
+ edac_dbg(1, " DIMM type: %s\n", edac_mem_types[pvt->dram_type]);
if (pvt->fam >= 0x10) {
amd64_read_pci_cfg(pvt->F3, EXT_NB_MCA_CFG, &tmp);
*/
cs_mode = DBAM_DIMM(csrow_nr / 2, dbam);
- nr_pages = pvt->ops->dbam_to_cs(pvt, dct, cs_mode) << (20 - PAGE_SHIFT);
+ nr_pages = pvt->ops->dbam_to_cs(pvt, dct, cs_mode, (csrow_nr / 2))
+ << (20 - PAGE_SHIFT);
edac_dbg(0, "csrow: %d, channel: %d, DBAM idx: %d\n",
csrow_nr, dct, cs_mode);
struct csrow_info *csrow;
struct dimm_info *dimm;
enum edac_type edac_mode;
- enum mem_type mtype;
int i, j, empty = 1;
int nr_pages = 0;
u32 val;
nr_pages += row_dct1_pages;
}
- mtype = determine_memory_type(pvt, i);
-
edac_dbg(1, "Total csrow%d pages: %u\n", i, nr_pages);
/*
for (j = 0; j < pvt->channel_count; j++) {
dimm = csrow->channels[j]->dimm;
- dimm->mtype = mtype;
+ dimm->mtype = pvt->dram_type;
dimm->edac_mode = edac_mode;
}
}
fam_type = &family_types[F15_M30H_CPUS];
pvt->ops = &family_types[F15_M30H_CPUS].ops;
break;
+ } else if (pvt->model == 0x60) {
+ fam_type = &family_types[F15_M60H_CPUS];
+ pvt->ops = &family_types[F15_M60H_CPUS].ops;
+ break;
}
fam_type = &family_types[F15_CPUS];
* inquiry this table to see if this driver is for a given device found.
*/
static const struct pci_device_id amd64_pci_table[] = {
- {
- .vendor = PCI_VENDOR_ID_AMD,
- .device = PCI_DEVICE_ID_AMD_K8_NB_MEMCTL,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .class = 0,
- .class_mask = 0,
- },
- {
- .vendor = PCI_VENDOR_ID_AMD,
- .device = PCI_DEVICE_ID_AMD_10H_NB_DRAM,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .class = 0,
- .class_mask = 0,
- },
- {
- .vendor = PCI_VENDOR_ID_AMD,
- .device = PCI_DEVICE_ID_AMD_15H_NB_F2,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .class = 0,
- .class_mask = 0,
- },
- {
- .vendor = PCI_VENDOR_ID_AMD,
- .device = PCI_DEVICE_ID_AMD_15H_M30H_NB_F2,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .class = 0,
- .class_mask = 0,
- },
- {
- .vendor = PCI_VENDOR_ID_AMD,
- .device = PCI_DEVICE_ID_AMD_16H_NB_F2,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .class = 0,
- .class_mask = 0,
- },
- {
- .vendor = PCI_VENDOR_ID_AMD,
- .device = PCI_DEVICE_ID_AMD_16H_M30H_NB_F2,
- .subvendor = PCI_ANY_ID,
- .subdevice = PCI_ANY_ID,
- .class = 0,
- .class_mask = 0,
- },
-
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_K8_NB_MEMCTL) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_10H_NB_DRAM) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F2) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F2) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M60H_NB_F2) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F2) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F2) },
{0, }
};
MODULE_DEVICE_TABLE(pci, amd64_pci_table);
goto err_no_instances;
setup_pci_device();
+
+#ifdef CONFIG_X86_32
+ amd64_err("%s on 32-bit is unsupported. USE AT YOUR OWN RISK!\n", EDAC_MOD_STR);
+#endif
+
return 0;
err_no_instances:
/*
* PCI-defined configuration space registers
*/
-#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F1 0x141b
-#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F2 0x141c
#define PCI_DEVICE_ID_AMD_15H_NB_F1 0x1601
#define PCI_DEVICE_ID_AMD_15H_NB_F2 0x1602
+#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F1 0x141b
+#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F2 0x141c
+#define PCI_DEVICE_ID_AMD_15H_M60H_NB_F1 0x1571
+#define PCI_DEVICE_ID_AMD_15H_M60H_NB_F2 0x1572
#define PCI_DEVICE_ID_AMD_16H_NB_F1 0x1531
#define PCI_DEVICE_ID_AMD_16H_NB_F2 0x1532
#define PCI_DEVICE_ID_AMD_16H_M30H_NB_F1 0x1581
#define csrow_enabled(i, dct, pvt) ((pvt)->csels[(dct)].csbases[(i)] & DCSB_CS_ENABLE)
+#define DRAM_CONTROL 0x78
+
#define DBAM0 0x80
#define DBAM1 0x180
F10_CPUS,
F15_CPUS,
F15_M30H_CPUS,
+ F15_M60H_CPUS,
F16_CPUS,
F16_M30H_CPUS,
NUM_FAMILIES,
/* place to store error injection parameters prior to issue */
struct error_injection injection;
+
+ /* cache the dram_type */
+ enum mem_type dram_type;
};
enum err_codes {
int (*early_channel_count) (struct amd64_pvt *pvt);
void (*map_sysaddr_to_csrow) (struct mem_ctl_info *mci, u64 sys_addr,
struct err_info *);
- int (*dbam_to_cs) (struct amd64_pvt *pvt, u8 dct, unsigned cs_mode);
+ int (*dbam_to_cs) (struct amd64_pvt *pvt, u8 dct,
+ unsigned cs_mode, int cs_mask_nr);
};
struct amd64_family_type {
if (apiexcp & UECC_EXCP_DETECTED) {
cpc925_mc_printk(mci, KERN_INFO, "DRAM UECC Fault\n");
- edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
+ edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
pfn, offset, 0,
csrow, -1, -1,
mci->ctl_name, "");
static void process_ce_no_info(struct mem_ctl_info *mci)
{
edac_dbg(3, "\n");
- edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1, 0, 0, 0, -1, -1, -1,
+ edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1, 0, 0, 0, -1, -1, -1,
"e7xxx CE log register overflow", "");
}
#endif /* CONFIG_EDAC_DEBUG */
-/*
- * keep those in sync with the enum mem_type
- */
const char * const edac_mem_types[] = {
- "Empty csrow",
- "Reserved csrow type",
- "Unknown csrow type",
- "Fast page mode RAM",
- "Extended data out RAM",
- "Burst Extended data out RAM",
- "Single data rate SDRAM",
- "Registered single data rate SDRAM",
- "Double data rate SDRAM",
- "Registered Double data rate SDRAM",
- "Rambus DRAM",
- "Unbuffered DDR2 RAM",
- "Fully buffered DDR2",
- "Registered DDR2 RAM",
- "Rambus XDR",
- "Unbuffered DDR3 RAM",
- "Registered DDR3 RAM",
+ [MEM_EMPTY] = "Empty csrow",
+ [MEM_RESERVED] = "Reserved csrow type",
+ [MEM_UNKNOWN] = "Unknown csrow type",
+ [MEM_FPM] = "Fast page mode RAM",
+ [MEM_EDO] = "Extended data out RAM",
+ [MEM_BEDO] = "Burst Extended data out RAM",
+ [MEM_SDR] = "Single data rate SDRAM",
+ [MEM_RDR] = "Registered single data rate SDRAM",
+ [MEM_DDR] = "Double data rate SDRAM",
+ [MEM_RDDR] = "Registered Double data rate SDRAM",
+ [MEM_RMBS] = "Rambus DRAM",
+ [MEM_DDR2] = "Unbuffered DDR2 RAM",
+ [MEM_FB_DDR2] = "Fully buffered DDR2",
+ [MEM_RDDR2] = "Registered DDR2 RAM",
+ [MEM_XDR] = "Rambus XDR",
+ [MEM_DDR3] = "Unbuffered DDR3 RAM",
+ [MEM_RDDR3] = "Registered DDR3 RAM",
+ [MEM_LRDDR3] = "Load-Reduced DDR3 RAM",
+ [MEM_DDR4] = "Unbuffered DDR4 RAM",
+ [MEM_RDDR4] = "Registered DDR4 RAM",
};
EXPORT_SYMBOL_GPL(edac_mem_types);
#include "edac_core.h"
#include "edac_module.h"
-/* Turn off this whole feature if PCI is not configured */
-#ifdef CONFIG_PCI
-
#define EDAC_PCI_SYMLINK "device"
/* data variables exported via sysfs */
module_param(edac_pci_panic_on_pe, int, 0644);
MODULE_PARM_DESC(edac_pci_panic_on_pe,
"Panic on PCI Bus Parity error: 0=off 1=on");
-
-#endif /* CONFIG_PCI */
/* Generate the trace event */
grain_bits = fls_long(e->grain);
- sprintf(pvt->detail_location, "APEI location: %s %s",
- e->location, e->other_detail);
+ snprintf(pvt->detail_location, sizeof(pvt->detail_location),
+ "APEI location: %s %s", e->location, e->other_detail);
trace_mc_event(type, e->msg, e->label, e->error_count,
mci->mc_idx, e->top_layer, e->mid_layer, e->low_layer,
PAGES_TO_MiB(e->page_frame_number) | e->offset_in_page,
pci_unregister_driver(&i3000_driver);
fail0:
- if (mci_pdev)
- pci_dev_put(mci_pdev);
+ pci_dev_put(mci_pdev);
return pci_rc;
}
-1, -1,
"i3000 UE", "");
} else if (log & I3200_ECCERRLOG_CE) {
- edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+ edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
0, 0, eccerrlog_syndrome(log),
eccerrlog_row(channel, log),
-1, -1,
- "i3000 UE", "");
+ "i3000 CE", "");
}
}
}
pci_unregister_driver(&i3200_driver);
fail0:
- if (mci_pdev)
- pci_dev_put(mci_pdev);
+ pci_dev_put(mci_pdev);
return pci_rc;
}
if (!i82443bxgx_registered)
i82443bxgx_edacmc_remove_one(mci_pdev);
- if (mci_pdev)
- pci_dev_put(mci_pdev);
+ pci_dev_put(mci_pdev);
}
module_init(i82443bxgx_edacmc_init);
dimm->location[0], dimm->location[1], -1,
"i82860 UE", "");
else
- edac_mc_handle_error(HW_EVENT_ERR_UNCORRECTED, mci, 1,
+ edac_mc_handle_error(HW_EVENT_ERR_CORRECTED, mci, 1,
info->eap, 0, info->derrsyn,
dimm->location[0], dimm->location[1], -1,
"i82860 CE", "");
"Retire status queue"
};
+static const char * const mc6_mce_desc[] = {
+ "Hardware Assertion",
+ "Free List",
+ "Physical Register File",
+ "Retire Queue",
+ "Scheduler table",
+ "Status Register File",
+};
+
static bool f12h_mc0_mce(u16 ec, u8 xec)
{
bool ret = false;
pr_cont(": %s error in the L2 cache tags.\n", R4_MSG(ec));
else if (xec == 0x0) {
if (TLB_ERROR(ec))
- pr_cont(": %s error in a Page Descriptor Cache or "
- "Guest TLB.\n", TT_MSG(ec));
+ pr_cont("%s error in a Page Descriptor Cache or Guest TLB.\n",
+ TT_MSG(ec));
else if (BUS_ERROR(ec))
pr_cont(": %s/ECC error in data read from NB: %s.\n",
R4_MSG(ec), PP_MSG(ec));
pr_emerg(HW_ERR "MC6 Error: ");
- switch (xec) {
- case 0x0:
- pr_cont("Hardware Assertion");
- break;
-
- case 0x1:
- pr_cont("Free List");
- break;
-
- case 0x2:
- pr_cont("Physical Register File");
- break;
-
- case 0x3:
- pr_cont("Retire Queue");
- break;
-
- case 0x4:
- pr_cont("Scheduler table");
- break;
-
- case 0x5:
- pr_cont("Status Register File");
- break;
-
- default:
+ if (xec > 0x5)
goto wrong_mc6_mce;
- break;
- }
-
- pr_cont(" parity error.\n");
+ pr_cont("%s parity error.\n", mc6_mce_desc[xec]);
return;
wrong_mc6_mce:
pr_cont("]: 0x%016llx\n", m->status);
if (m->status & MCI_STATUS_ADDRV)
- pr_emerg(HW_ERR "MC%d_ADDR: 0x%016llx\n", m->bank, m->addr);
+ pr_emerg(HW_ERR "MC%d Error Address: 0x%016llx\n", m->bank, m->addr);
if (!fam_ops)
goto err_code;
/*
- * A simple MCE injection facility for testing the MCE decoding code. This
- * driver should be built as module so that it can be loaded on production
- * kernels for testing purposes.
+ * A simple MCE injection facility for testing different aspects of the RAS
+ * code. This driver should be built as module so that it can be loaded
+ * on production kernels for testing purposes.
*
* This file may be distributed under the terms of the GNU General Public
* License version 2.
*
- * Copyright (c) 2010: Borislav Petkov <bp@alien8.de>
+ * Copyright (c) 2010-14: Borislav Petkov <bp@alien8.de>
* Advanced Micro Devices Inc.
*/
#include <linux/kobject.h>
+#include <linux/debugfs.h>
#include <linux/device.h>
-#include <linux/edac.h>
#include <linux/module.h>
+#include <linux/cpu.h>
#include <asm/mce.h>
#include "mce_amd.h"
-struct edac_mce_attr {
- struct attribute attr;
- ssize_t (*show) (struct kobject *kobj, struct edac_mce_attr *attr, char *buf);
- ssize_t (*store)(struct kobject *kobj, struct edac_mce_attr *attr,
- const char *buf, size_t count);
-};
-
-#define EDAC_MCE_ATTR(_name, _mode, _show, _store) \
-static struct edac_mce_attr mce_attr_##_name = __ATTR(_name, _mode, _show, _store)
-
-static struct kobject *mce_kobj;
-
/*
* Collect all the MCi_XXX settings
*/
static struct mce i_mce;
+static struct dentry *dfs_inj;
-#define MCE_INJECT_STORE(reg) \
-static ssize_t edac_inject_##reg##_store(struct kobject *kobj, \
- struct edac_mce_attr *attr, \
- const char *data, size_t count)\
+#define MCE_INJECT_SET(reg) \
+static int inj_##reg##_set(void *data, u64 val) \
{ \
- int ret = 0; \
- unsigned long value; \
- \
- ret = kstrtoul(data, 16, &value); \
- if (ret < 0) \
- printk(KERN_ERR "Error writing MCE " #reg " field.\n"); \
+ struct mce *m = (struct mce *)data; \
\
- i_mce.reg = value; \
- \
- return count; \
+ m->reg = val; \
+ return 0; \
}
-MCE_INJECT_STORE(status);
-MCE_INJECT_STORE(misc);
-MCE_INJECT_STORE(addr);
+MCE_INJECT_SET(status);
+MCE_INJECT_SET(misc);
+MCE_INJECT_SET(addr);
-#define MCE_INJECT_SHOW(reg) \
-static ssize_t edac_inject_##reg##_show(struct kobject *kobj, \
- struct edac_mce_attr *attr, \
- char *buf) \
+#define MCE_INJECT_GET(reg) \
+static int inj_##reg##_get(void *data, u64 *val) \
{ \
- return sprintf(buf, "0x%016llx\n", i_mce.reg); \
+ struct mce *m = (struct mce *)data; \
+ \
+ *val = m->reg; \
+ return 0; \
}
-MCE_INJECT_SHOW(status);
-MCE_INJECT_SHOW(misc);
-MCE_INJECT_SHOW(addr);
+MCE_INJECT_GET(status);
+MCE_INJECT_GET(misc);
+MCE_INJECT_GET(addr);
-EDAC_MCE_ATTR(status, 0644, edac_inject_status_show, edac_inject_status_store);
-EDAC_MCE_ATTR(misc, 0644, edac_inject_misc_show, edac_inject_misc_store);
-EDAC_MCE_ATTR(addr, 0644, edac_inject_addr_show, edac_inject_addr_store);
+DEFINE_SIMPLE_ATTRIBUTE(status_fops, inj_status_get, inj_status_set, "%llx\n");
+DEFINE_SIMPLE_ATTRIBUTE(misc_fops, inj_misc_get, inj_misc_set, "%llx\n");
+DEFINE_SIMPLE_ATTRIBUTE(addr_fops, inj_addr_get, inj_addr_set, "%llx\n");
/*
- * This denotes into which bank we're injecting and triggers
- * the injection, at the same time.
+ * Caller needs to be make sure this cpu doesn't disappear
+ * from under us, i.e.: get_cpu/put_cpu.
*/
-static ssize_t edac_inject_bank_store(struct kobject *kobj,
- struct edac_mce_attr *attr,
- const char *data, size_t count)
+static int toggle_hw_mce_inject(unsigned int cpu, bool enable)
{
- int ret = 0;
- unsigned long value;
+ u32 l, h;
+ int err;
- ret = kstrtoul(data, 10, &value);
- if (ret < 0) {
- printk(KERN_ERR "Invalid bank value!\n");
- return -EINVAL;
+ err = rdmsr_on_cpu(cpu, MSR_K7_HWCR, &l, &h);
+ if (err) {
+ pr_err("%s: error reading HWCR\n", __func__);
+ return err;
}
- if (value > 5)
- if (boot_cpu_data.x86 != 0x15 || value > 6) {
- printk(KERN_ERR "Non-existent MCE bank: %lu\n", value);
- return -EINVAL;
- }
+ enable ? (l |= BIT(18)) : (l &= ~BIT(18));
- i_mce.bank = value;
+ err = wrmsr_on_cpu(cpu, MSR_K7_HWCR, l, h);
+ if (err)
+ pr_err("%s: error writing HWCR\n", __func__);
- amd_decode_mce(NULL, 0, &i_mce);
+ return err;
+}
- return count;
+static int flags_get(void *data, u64 *val)
+{
+ struct mce *m = (struct mce *)data;
+
+ *val = m->inject_flags;
+
+ return 0;
}
-static ssize_t edac_inject_bank_show(struct kobject *kobj,
- struct edac_mce_attr *attr, char *buf)
+static int flags_set(void *data, u64 val)
{
- return sprintf(buf, "%d\n", i_mce.bank);
+ struct mce *m = (struct mce *)data;
+
+ m->inject_flags = (u8)val;
+ return 0;
}
-EDAC_MCE_ATTR(bank, 0644, edac_inject_bank_show, edac_inject_bank_store);
+DEFINE_SIMPLE_ATTRIBUTE(flags_fops, flags_get, flags_set, "%llu\n");
-static struct edac_mce_attr *sysfs_attrs[] = { &mce_attr_status, &mce_attr_misc,
- &mce_attr_addr, &mce_attr_bank
-};
+/*
+ * On which CPU to inject?
+ */
+MCE_INJECT_GET(extcpu);
-static int __init edac_init_mce_inject(void)
+static int inj_extcpu_set(void *data, u64 val)
{
- struct bus_type *edac_subsys = NULL;
- int i, err = 0;
+ struct mce *m = (struct mce *)data;
- edac_subsys = edac_get_sysfs_subsys();
- if (!edac_subsys)
+ if (val >= nr_cpu_ids || !cpu_online(val)) {
+ pr_err("%s: Invalid CPU: %llu\n", __func__, val);
return -EINVAL;
+ }
+ m->extcpu = val;
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(extcpu_fops, inj_extcpu_get, inj_extcpu_set, "%llu\n");
- mce_kobj = kobject_create_and_add("mce", &edac_subsys->dev_root->kobj);
- if (!mce_kobj) {
- printk(KERN_ERR "Error creating a mce kset.\n");
- err = -ENOMEM;
- goto err_mce_kobj;
+static void trigger_mce(void *info)
+{
+ asm volatile("int $18");
+}
+
+static void do_inject(void)
+{
+ u64 mcg_status = 0;
+ unsigned int cpu = i_mce.extcpu;
+ u8 b = i_mce.bank;
+
+ if (!(i_mce.inject_flags & MCJ_EXCEPTION)) {
+ amd_decode_mce(NULL, 0, &i_mce);
+ return;
}
- for (i = 0; i < ARRAY_SIZE(sysfs_attrs); i++) {
- err = sysfs_create_file(mce_kobj, &sysfs_attrs[i]->attr);
- if (err) {
- printk(KERN_ERR "Error creating %s in sysfs.\n",
- sysfs_attrs[i]->attr.name);
- goto err_sysfs_create;
+ get_online_cpus();
+ if (!cpu_online(cpu))
+ goto err;
+
+ /* prep MCE global settings for the injection */
+ mcg_status = MCG_STATUS_MCIP | MCG_STATUS_EIPV;
+
+ if (!(i_mce.status & MCI_STATUS_PCC))
+ mcg_status |= MCG_STATUS_RIPV;
+
+ toggle_hw_mce_inject(cpu, true);
+
+ wrmsr_on_cpu(cpu, MSR_IA32_MCG_STATUS,
+ (u32)mcg_status, (u32)(mcg_status >> 32));
+
+ wrmsr_on_cpu(cpu, MSR_IA32_MCx_STATUS(b),
+ (u32)i_mce.status, (u32)(i_mce.status >> 32));
+
+ wrmsr_on_cpu(cpu, MSR_IA32_MCx_ADDR(b),
+ (u32)i_mce.addr, (u32)(i_mce.addr >> 32));
+
+ wrmsr_on_cpu(cpu, MSR_IA32_MCx_MISC(b),
+ (u32)i_mce.misc, (u32)(i_mce.misc >> 32));
+
+ toggle_hw_mce_inject(cpu, false);
+
+ smp_call_function_single(cpu, trigger_mce, NULL, 0);
+
+err:
+ put_online_cpus();
+
+}
+
+/*
+ * This denotes into which bank we're injecting and triggers
+ * the injection, at the same time.
+ */
+static int inj_bank_set(void *data, u64 val)
+{
+ struct mce *m = (struct mce *)data;
+
+ if (val > 5) {
+ if (boot_cpu_data.x86 != 0x15 || val > 6) {
+ pr_err("Non-existent MCE bank: %llu\n", val);
+ return -EINVAL;
}
}
- return 0;
-err_sysfs_create:
- while (--i >= 0)
- sysfs_remove_file(mce_kobj, &sysfs_attrs[i]->attr);
+ m->bank = val;
+ do_inject();
- kobject_del(mce_kobj);
+ return 0;
+}
-err_mce_kobj:
- edac_put_sysfs_subsys();
+static int inj_bank_get(void *data, u64 *val)
+{
+ struct mce *m = (struct mce *)data;
- return err;
+ *val = m->bank;
+ return 0;
}
-static void __exit edac_exit_mce_inject(void)
+DEFINE_SIMPLE_ATTRIBUTE(bank_fops, inj_bank_get, inj_bank_set, "%llu\n");
+
+struct dfs_node {
+ char *name;
+ struct dentry *d;
+ const struct file_operations *fops;
+} dfs_fls[] = {
+ { .name = "status", .fops = &status_fops },
+ { .name = "misc", .fops = &misc_fops },
+ { .name = "addr", .fops = &addr_fops },
+ { .name = "bank", .fops = &bank_fops },
+ { .name = "flags", .fops = &flags_fops },
+ { .name = "cpu", .fops = &extcpu_fops },
+};
+
+static int __init init_mce_inject(void)
{
int i;
- for (i = 0; i < ARRAY_SIZE(sysfs_attrs); i++)
- sysfs_remove_file(mce_kobj, &sysfs_attrs[i]->attr);
+ dfs_inj = debugfs_create_dir("mce-inject", NULL);
+ if (!dfs_inj)
+ return -EINVAL;
+
+ for (i = 0; i < ARRAY_SIZE(dfs_fls); i++) {
+ dfs_fls[i].d = debugfs_create_file(dfs_fls[i].name,
+ S_IRUSR | S_IWUSR,
+ dfs_inj,
+ &i_mce,
+ dfs_fls[i].fops);
+
+ if (!dfs_fls[i].d)
+ goto err_dfs_add;
+ }
+
+ return 0;
+
+err_dfs_add:
+ while (--i >= 0)
+ debugfs_remove(dfs_fls[i].d);
- kobject_del(mce_kobj);
+ debugfs_remove(dfs_inj);
+ dfs_inj = NULL;
- edac_put_sysfs_subsys();
+ return -ENOMEM;
}
-module_init(edac_init_mce_inject);
-module_exit(edac_exit_mce_inject);
+static void __exit exit_mce_inject(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(dfs_fls); i++)
+ debugfs_remove(dfs_fls[i].d);
+
+ memset(&dfs_fls, 0, sizeof(dfs_fls));
+
+ debugfs_remove(dfs_inj);
+ dfs_inj = NULL;
+}
+module_init(init_mce_inject);
+module_exit(exit_mce_inject);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Borislav Petkov <bp@alien8.de>");
MODULE_AUTHOR("AMD Inc.");
-MODULE_DESCRIPTION("MCE injection facility for testing MCE decoding");
+MODULE_DESCRIPTION("MCE injection facility for RAS testing");
res = devm_request_irq(&pdev->dev,
pdata->irq,
mv64x60_pci_isr,
- IRQF_DISABLED,
+ 0,
"[EDAC] PCI err",
pci);
if (res < 0) {
res = devm_request_irq(&pdev->dev,
pdata->irq,
mv64x60_sram_isr,
- IRQF_DISABLED,
+ 0,
"[EDAC] SRAM err",
edac_dev);
if (res < 0) {
res = devm_request_irq(&pdev->dev,
pdata->irq,
mv64x60_cpu_isr,
- IRQF_DISABLED,
+ 0,
"[EDAC] CPU err",
edac_dev);
if (res < 0) {
res = devm_request_irq(&pdev->dev,
pdata->irq,
mv64x60_mc_isr,
- IRQF_DISABLED,
+ 0,
"[EDAC] MC err",
mci);
if (res < 0) {
status = request_irq(ded_irq,
ppc4xx_edac_isr,
- IRQF_DISABLED,
+ 0,
"[EDAC] MC ECCDED",
mci);
status = request_irq(sec_irq,
ppc4xx_edac_isr,
- IRQF_DISABLED,
+ 0,
"[EDAC] MC ECCSEC",
mci);
pci_unregister_driver(&x38_driver);
fail0:
- if (mci_pdev)
- pci_dev_put(mci_pdev);
+ pci_dev_put(mci_pdev);
return pci_rc;
}
_IOC_SIZE(cmd) > sizeof(buffer))
return -ENOTTY;
- if (_IOC_DIR(cmd) == _IOC_READ)
- memset(&buffer, 0, _IOC_SIZE(cmd));
+ memset(&buffer, 0, sizeof(buffer));
if (_IOC_DIR(cmd) & _IOC_WRITE)
if (copy_from_user(&buffer, arg, _IOC_SIZE(cmd)))
while ((i < num) && (data - buf + sizeof(struct dmi_header)) <= len) {
const struct dmi_header *dm = (const struct dmi_header *)data;
+ /*
+ * 7.45 End-of-Table (Type 127) [SMBIOS reference spec v3.0.0]
+ */
+ if (dm->type == DMI_ENTRY_END_OF_TABLE)
+ break;
+
/*
* We want to know the total length (formatted area and
* strings) before decoding to make sure we won't run off the
}
}
-static u32 dmi_base;
+static phys_addr_t dmi_base;
static u16 dmi_len;
static u16 dmi_num;
if (memcmp(buf, "_SM_", 4) == 0 &&
buf[5] < 32 && dmi_checksum(buf, buf[5])) {
- smbios_ver = (buf[6] << 8) + buf[7];
+ smbios_ver = get_unaligned_be16(buf + 6);
/* Some BIOS report weird SMBIOS version, fix that up */
switch (smbios_ver) {
buf += 16;
if (memcmp(buf, "_DMI_", 5) == 0 && dmi_checksum(buf, 15)) {
- dmi_num = (buf[13] << 8) | buf[12];
- dmi_len = (buf[7] << 8) | buf[6];
- dmi_base = (buf[11] << 24) | (buf[10] << 16) |
- (buf[9] << 8) | buf[8];
+ dmi_num = get_unaligned_le16(buf + 12);
+ dmi_len = get_unaligned_le16(buf + 6);
+ dmi_base = get_unaligned_le32(buf + 8);
if (dmi_walk_early(dmi_decode) == 0) {
if (smbios_ver) {
return 1;
}
+/*
+ * Check for the SMBIOS 3.0 64-bit entry point signature. Unlike the legacy
+ * 32-bit entry point, there is no embedded DMI header (_DMI_) in here.
+ */
+static int __init dmi_smbios3_present(const u8 *buf)
+{
+ if (memcmp(buf, "_SM3_", 5) == 0 &&
+ buf[6] < 32 && dmi_checksum(buf, buf[6])) {
+ dmi_ver = get_unaligned_be16(buf + 7);
+ dmi_len = get_unaligned_le32(buf + 12);
+ dmi_base = get_unaligned_le64(buf + 16);
+
+ /*
+ * The 64-bit SMBIOS 3.0 entry point no longer has a field
+ * containing the number of structures present in the table.
+ * Instead, it defines the table size as a maximum size, and
+ * relies on the end-of-table structure type (#127) to be used
+ * to signal the end of the table.
+ * So let's define dmi_num as an upper bound as well: each
+ * structure has a 4 byte header, so dmi_len / 4 is an upper
+ * bound for the number of structures in the table.
+ */
+ dmi_num = dmi_len / 4;
+
+ if (dmi_walk_early(dmi_decode) == 0) {
+ pr_info("SMBIOS %d.%d present.\n",
+ dmi_ver >> 8, dmi_ver & 0xFF);
+ dmi_format_ids(dmi_ids_string, sizeof(dmi_ids_string));
+ pr_debug("DMI: %s\n", dmi_ids_string);
+ return 0;
+ }
+ }
+ return 1;
+}
+
void __init dmi_scan_machine(void)
{
char __iomem *p, *q;
char buf[32];
if (efi_enabled(EFI_CONFIG_TABLES)) {
+ /*
+ * According to the DMTF SMBIOS reference spec v3.0.0, it is
+ * allowed to define both the 64-bit entry point (smbios3) and
+ * the 32-bit entry point (smbios), in which case they should
+ * either both point to the same SMBIOS structure table, or the
+ * table pointed to by the 64-bit entry point should contain a
+ * superset of the table contents pointed to by the 32-bit entry
+ * point (section 5.2)
+ * This implies that the 64-bit entry point should have
+ * precedence if it is defined and supported by the OS. If we
+ * have the 64-bit entry point, but fail to decode it, fall
+ * back to the legacy one (if available)
+ */
+ if (efi.smbios3 != EFI_INVALID_TABLE_ADDR) {
+ p = dmi_early_remap(efi.smbios3, 32);
+ if (p == NULL)
+ goto error;
+ memcpy_fromio(buf, p, 32);
+ dmi_early_unmap(p, 32);
+
+ if (!dmi_smbios3_present(buf)) {
+ dmi_available = 1;
+ goto out;
+ }
+ }
if (efi.smbios == EFI_INVALID_TABLE_ADDR)
goto error;
memset(buf, 0, 16);
for (q = p; q < p + 0x10000; q += 16) {
memcpy_fromio(buf + 16, q, 16);
- if (!dmi_present(buf)) {
+ if (!dmi_smbios3_present(buf) || !dmi_present(buf)) {
dmi_available = 1;
dmi_early_unmap(p, 0x10000);
goto out;
.acpi = EFI_INVALID_TABLE_ADDR,
.acpi20 = EFI_INVALID_TABLE_ADDR,
.smbios = EFI_INVALID_TABLE_ADDR,
+ .smbios3 = EFI_INVALID_TABLE_ADDR,
.sal_systab = EFI_INVALID_TABLE_ADDR,
.boot_info = EFI_INVALID_TABLE_ADDR,
.hcdp = EFI_INVALID_TABLE_ADDR,
};
EXPORT_SYMBOL(efi);
+static bool disable_runtime;
+static int __init setup_noefi(char *arg)
+{
+ disable_runtime = true;
+ return 0;
+}
+early_param("noefi", setup_noefi);
+
+bool efi_runtime_disabled(void)
+{
+ return disable_runtime;
+}
+
+static int __init parse_efi_cmdline(char *str)
+{
+ if (parse_option_str(str, "noruntime"))
+ disable_runtime = true;
+
+ return 0;
+}
+early_param("efi", parse_efi_cmdline);
+
static struct kobject *efi_kobj;
static struct kobject *efivars_kobj;
str += sprintf(str, "ACPI=0x%lx\n", efi.acpi);
if (efi.smbios != EFI_INVALID_TABLE_ADDR)
str += sprintf(str, "SMBIOS=0x%lx\n", efi.smbios);
+ if (efi.smbios3 != EFI_INVALID_TABLE_ADDR)
+ str += sprintf(str, "SMBIOS3=0x%lx\n", efi.smbios3);
if (efi.hcdp != EFI_INVALID_TABLE_ADDR)
str += sprintf(str, "HCDP=0x%lx\n", efi.hcdp);
if (efi.boot_info != EFI_INVALID_TABLE_ADDR)
{MPS_TABLE_GUID, "MPS", &efi.mps},
{SAL_SYSTEM_TABLE_GUID, "SALsystab", &efi.sal_systab},
{SMBIOS_TABLE_GUID, "SMBIOS", &efi.smbios},
+ {SMBIOS3_TABLE_GUID, "SMBIOS 3.0", &efi.smbios3},
{UGA_IO_PROTOCOL_GUID, "UGA", &efi.uga},
{NULL_GUID, NULL, NULL},
};
return ret;
}
#endif /* CONFIG_EFI_PARAMS_FROM_FDT */
+
+static __initdata char memory_type_name[][20] = {
+ "Reserved",
+ "Loader Code",
+ "Loader Data",
+ "Boot Code",
+ "Boot Data",
+ "Runtime Code",
+ "Runtime Data",
+ "Conventional Memory",
+ "Unusable Memory",
+ "ACPI Reclaim Memory",
+ "ACPI Memory NVS",
+ "Memory Mapped I/O",
+ "MMIO Port Space",
+ "PAL Code"
+};
+
+char * __init efi_md_typeattr_format(char *buf, size_t size,
+ const efi_memory_desc_t *md)
+{
+ char *pos;
+ int type_len;
+ u64 attr;
+
+ pos = buf;
+ if (md->type >= ARRAY_SIZE(memory_type_name))
+ type_len = snprintf(pos, size, "[type=%u", md->type);
+ else
+ type_len = snprintf(pos, size, "[%-*s",
+ (int)(sizeof(memory_type_name[0]) - 1),
+ memory_type_name[md->type]);
+ if (type_len >= size)
+ return buf;
+
+ pos += type_len;
+ size -= type_len;
+
+ attr = md->attribute;
+ if (attr & ~(EFI_MEMORY_UC | EFI_MEMORY_WC | EFI_MEMORY_WT |
+ EFI_MEMORY_WB | EFI_MEMORY_UCE | EFI_MEMORY_WP |
+ EFI_MEMORY_RP | EFI_MEMORY_XP | EFI_MEMORY_RUNTIME))
+ snprintf(pos, size, "|attr=0x%016llx]",
+ (unsigned long long)attr);
+ else
+ snprintf(pos, size, "|%3s|%2s|%2s|%2s|%3s|%2s|%2s|%2s|%2s]",
+ attr & EFI_MEMORY_RUNTIME ? "RUN" : "",
+ attr & EFI_MEMORY_XP ? "XP" : "",
+ attr & EFI_MEMORY_RP ? "RP" : "",
+ attr & EFI_MEMORY_WP ? "WP" : "",
+ attr & EFI_MEMORY_UCE ? "UCE" : "",
+ attr & EFI_MEMORY_WB ? "WB" : "",
+ attr & EFI_MEMORY_WT ? "WT" : "",
+ attr & EFI_MEMORY_WC ? "WC" : "",
+ attr & EFI_MEMORY_UC ? "UC" : "");
+ return buf;
+}
goto fail_free_image;
}
+ status = efi_parse_options(cmdline_ptr);
+ if (status != EFI_SUCCESS)
+ pr_efi_err(sys_table, "Failed to parse EFI cmdline options\n");
+
/*
* Unauthenticated device tree data is a security hazard, so
* ignore 'dtb=' unless UEFI Secure Boot is disabled.
goto fail_free_cmdline;
}
}
- if (!fdt_addr)
+
+ if (fdt_addr) {
+ pr_efi(sys_table, "Using DTB from command line\n");
+ } else {
/* Look for a device tree configuration table entry. */
fdt_addr = (uintptr_t)get_fdt(sys_table);
+ if (fdt_addr)
+ pr_efi(sys_table, "Using DTB from configuration table\n");
+ }
+
+ if (!fdt_addr)
+ pr_efi(sys_table, "Generating empty DTB\n");
status = handle_cmdline_files(sys_table, image, cmdline_ptr,
"initrd=", dram_base + SZ_512M,
#include "efistub.h"
+/*
+ * Some firmware implementations have problems reading files in one go.
+ * A read chunk size of 1MB seems to work for most platforms.
+ *
+ * Unfortunately, reading files in chunks triggers *other* bugs on some
+ * platforms, so we provide a way to disable this workaround, which can
+ * be done by passing "efi=nochunk" on the EFI boot stub command line.
+ *
+ * If you experience issues with initrd images being corrupt it's worth
+ * trying efi=nochunk, but chunking is enabled by default because there
+ * are far more machines that require the workaround than those that
+ * break with it enabled.
+ */
#define EFI_READ_CHUNK_SIZE (1024 * 1024)
+static unsigned long __chunk_size = EFI_READ_CHUNK_SIZE;
+
struct file_info {
efi_file_handle_t *handle;
u64 size;
efi_call_early(free_pages, addr, nr_pages);
}
+/*
+ * Parse the ASCII string 'cmdline' for EFI options, denoted by the efi=
+ * option, e.g. efi=nochunk.
+ *
+ * It should be noted that efi= is parsed in two very different
+ * environments, first in the early boot environment of the EFI boot
+ * stub, and subsequently during the kernel boot.
+ */
+efi_status_t efi_parse_options(char *cmdline)
+{
+ char *str;
+
+ /*
+ * If no EFI parameters were specified on the cmdline we've got
+ * nothing to do.
+ */
+ str = strstr(cmdline, "efi=");
+ if (!str)
+ return EFI_SUCCESS;
+
+ /* Skip ahead to first argument */
+ str += strlen("efi=");
+
+ /*
+ * Remember, because efi= is also used by the kernel we need to
+ * skip over arguments we don't understand.
+ */
+ while (*str) {
+ if (!strncmp(str, "nochunk", 7)) {
+ str += strlen("nochunk");
+ __chunk_size = -1UL;
+ }
+
+ /* Group words together, delimited by "," */
+ while (*str && *str != ',')
+ str++;
+
+ if (*str == ',')
+ str++;
+ }
+
+ return EFI_SUCCESS;
+}
/*
* Check the cmdline for a LILO-style file= arguments.
size = files[j].size;
while (size) {
unsigned long chunksize;
- if (size > EFI_READ_CHUNK_SIZE)
- chunksize = EFI_READ_CHUNK_SIZE;
+ if (size > __chunk_size)
+ chunksize = __chunk_size;
else
chunksize = size;
* This file is released under the GPLv2.
*/
+#include <linux/bug.h>
#include <linux/efi.h>
-#include <linux/spinlock.h> /* spinlock_t */
+#include <linux/mutex.h>
+#include <linux/spinlock.h>
#include <asm/efi.h>
+/*
+ * According to section 7.1 of the UEFI spec, Runtime Services are not fully
+ * reentrant, and there are particular combinations of calls that need to be
+ * serialized. (source: UEFI Specification v2.4A)
+ *
+ * Table 31. Rules for Reentry Into Runtime Services
+ * +------------------------------------+-------------------------------+
+ * | If previous call is busy in | Forbidden to call |
+ * +------------------------------------+-------------------------------+
+ * | Any | SetVirtualAddressMap() |
+ * +------------------------------------+-------------------------------+
+ * | ConvertPointer() | ConvertPointer() |
+ * +------------------------------------+-------------------------------+
+ * | SetVariable() | ResetSystem() |
+ * | UpdateCapsule() | |
+ * | SetTime() | |
+ * | SetWakeupTime() | |
+ * | GetNextHighMonotonicCount() | |
+ * +------------------------------------+-------------------------------+
+ * | GetVariable() | GetVariable() |
+ * | GetNextVariableName() | GetNextVariableName() |
+ * | SetVariable() | SetVariable() |
+ * | QueryVariableInfo() | QueryVariableInfo() |
+ * | UpdateCapsule() | UpdateCapsule() |
+ * | QueryCapsuleCapabilities() | QueryCapsuleCapabilities() |
+ * | GetNextHighMonotonicCount() | GetNextHighMonotonicCount() |
+ * +------------------------------------+-------------------------------+
+ * | GetTime() | GetTime() |
+ * | SetTime() | SetTime() |
+ * | GetWakeupTime() | GetWakeupTime() |
+ * | SetWakeupTime() | SetWakeupTime() |
+ * +------------------------------------+-------------------------------+
+ *
+ * Due to the fact that the EFI pstore may write to the variable store in
+ * interrupt context, we need to use a spinlock for at least the groups that
+ * contain SetVariable() and QueryVariableInfo(). That leaves little else, as
+ * none of the remaining functions are actually ever called at runtime.
+ * So let's just use a single spinlock to serialize all Runtime Services calls.
+ */
+static DEFINE_SPINLOCK(efi_runtime_lock);
+
+/*
+ * Some runtime services calls can be reentrant under NMI, even if the table
+ * above says they are not. (source: UEFI Specification v2.4A)
+ *
+ * Table 32. Functions that may be called after Machine Check, INIT and NMI
+ * +----------------------------+------------------------------------------+
+ * | Function | Called after Machine Check, INIT and NMI |
+ * +----------------------------+------------------------------------------+
+ * | GetTime() | Yes, even if previously busy. |
+ * | GetVariable() | Yes, even if previously busy |
+ * | GetNextVariableName() | Yes, even if previously busy |
+ * | QueryVariableInfo() | Yes, even if previously busy |
+ * | SetVariable() | Yes, even if previously busy |
+ * | UpdateCapsule() | Yes, even if previously busy |
+ * | QueryCapsuleCapabilities() | Yes, even if previously busy |
+ * | ResetSystem() | Yes, even if previously busy |
+ * +----------------------------+------------------------------------------+
+ *
+ * In order to prevent deadlocks under NMI, the wrappers for these functions
+ * may only grab the efi_runtime_lock or rtc_lock spinlocks if !efi_in_nmi().
+ * However, not all of the services listed are reachable through NMI code paths,
+ * so the the special handling as suggested by the UEFI spec is only implemented
+ * for QueryVariableInfo() and SetVariable(), as these can be reached in NMI
+ * context through efi_pstore_write().
+ */
+
/*
* As per commit ef68c8f87ed1 ("x86: Serialize EFI time accesses on rtc_lock"),
* the EFI specification requires that callers of the time related runtime
efi_status_t status;
spin_lock_irqsave(&rtc_lock, flags);
+ spin_lock(&efi_runtime_lock);
status = efi_call_virt(get_time, tm, tc);
+ spin_unlock(&efi_runtime_lock);
spin_unlock_irqrestore(&rtc_lock, flags);
return status;
}
efi_status_t status;
spin_lock_irqsave(&rtc_lock, flags);
+ spin_lock(&efi_runtime_lock);
status = efi_call_virt(set_time, tm);
+ spin_unlock(&efi_runtime_lock);
spin_unlock_irqrestore(&rtc_lock, flags);
return status;
}
efi_status_t status;
spin_lock_irqsave(&rtc_lock, flags);
+ spin_lock(&efi_runtime_lock);
status = efi_call_virt(get_wakeup_time, enabled, pending, tm);
+ spin_unlock(&efi_runtime_lock);
spin_unlock_irqrestore(&rtc_lock, flags);
return status;
}
efi_status_t status;
spin_lock_irqsave(&rtc_lock, flags);
+ spin_lock(&efi_runtime_lock);
status = efi_call_virt(set_wakeup_time, enabled, tm);
+ spin_unlock(&efi_runtime_lock);
spin_unlock_irqrestore(&rtc_lock, flags);
return status;
}
unsigned long *data_size,
void *data)
{
- return efi_call_virt(get_variable, name, vendor, attr, data_size, data);
+ unsigned long flags;
+ efi_status_t status;
+
+ spin_lock_irqsave(&efi_runtime_lock, flags);
+ status = efi_call_virt(get_variable, name, vendor, attr, data_size,
+ data);
+ spin_unlock_irqrestore(&efi_runtime_lock, flags);
+ return status;
}
static efi_status_t virt_efi_get_next_variable(unsigned long *name_size,
efi_char16_t *name,
efi_guid_t *vendor)
{
- return efi_call_virt(get_next_variable, name_size, name, vendor);
+ unsigned long flags;
+ efi_status_t status;
+
+ spin_lock_irqsave(&efi_runtime_lock, flags);
+ status = efi_call_virt(get_next_variable, name_size, name, vendor);
+ spin_unlock_irqrestore(&efi_runtime_lock, flags);
+ return status;
}
static efi_status_t virt_efi_set_variable(efi_char16_t *name,
unsigned long data_size,
void *data)
{
- return efi_call_virt(set_variable, name, vendor, attr, data_size, data);
+ unsigned long flags;
+ efi_status_t status;
+
+ spin_lock_irqsave(&efi_runtime_lock, flags);
+ status = efi_call_virt(set_variable, name, vendor, attr, data_size,
+ data);
+ spin_unlock_irqrestore(&efi_runtime_lock, flags);
+ return status;
}
+static efi_status_t
+virt_efi_set_variable_nonblocking(efi_char16_t *name, efi_guid_t *vendor,
+ u32 attr, unsigned long data_size,
+ void *data)
+{
+ unsigned long flags;
+ efi_status_t status;
+
+ if (!spin_trylock_irqsave(&efi_runtime_lock, flags))
+ return EFI_NOT_READY;
+
+ status = efi_call_virt(set_variable, name, vendor, attr, data_size,
+ data);
+ spin_unlock_irqrestore(&efi_runtime_lock, flags);
+ return status;
+}
+
+
static efi_status_t virt_efi_query_variable_info(u32 attr,
u64 *storage_space,
u64 *remaining_space,
u64 *max_variable_size)
{
+ unsigned long flags;
+ efi_status_t status;
+
if (efi.runtime_version < EFI_2_00_SYSTEM_TABLE_REVISION)
return EFI_UNSUPPORTED;
- return efi_call_virt(query_variable_info, attr, storage_space,
- remaining_space, max_variable_size);
+ spin_lock_irqsave(&efi_runtime_lock, flags);
+ status = efi_call_virt(query_variable_info, attr, storage_space,
+ remaining_space, max_variable_size);
+ spin_unlock_irqrestore(&efi_runtime_lock, flags);
+ return status;
}
static efi_status_t virt_efi_get_next_high_mono_count(u32 *count)
{
- return efi_call_virt(get_next_high_mono_count, count);
+ unsigned long flags;
+ efi_status_t status;
+
+ spin_lock_irqsave(&efi_runtime_lock, flags);
+ status = efi_call_virt(get_next_high_mono_count, count);
+ spin_unlock_irqrestore(&efi_runtime_lock, flags);
+ return status;
}
static void virt_efi_reset_system(int reset_type,
unsigned long data_size,
efi_char16_t *data)
{
+ unsigned long flags;
+
+ spin_lock_irqsave(&efi_runtime_lock, flags);
__efi_call_virt(reset_system, reset_type, status, data_size, data);
+ spin_unlock_irqrestore(&efi_runtime_lock, flags);
}
static efi_status_t virt_efi_update_capsule(efi_capsule_header_t **capsules,
unsigned long count,
unsigned long sg_list)
{
+ unsigned long flags;
+ efi_status_t status;
+
if (efi.runtime_version < EFI_2_00_SYSTEM_TABLE_REVISION)
return EFI_UNSUPPORTED;
- return efi_call_virt(update_capsule, capsules, count, sg_list);
+ spin_lock_irqsave(&efi_runtime_lock, flags);
+ status = efi_call_virt(update_capsule, capsules, count, sg_list);
+ spin_unlock_irqrestore(&efi_runtime_lock, flags);
+ return status;
}
static efi_status_t virt_efi_query_capsule_caps(efi_capsule_header_t **capsules,
u64 *max_size,
int *reset_type)
{
+ unsigned long flags;
+ efi_status_t status;
+
if (efi.runtime_version < EFI_2_00_SYSTEM_TABLE_REVISION)
return EFI_UNSUPPORTED;
- return efi_call_virt(query_capsule_caps, capsules, count, max_size,
- reset_type);
+ spin_lock_irqsave(&efi_runtime_lock, flags);
+ status = efi_call_virt(query_capsule_caps, capsules, count, max_size,
+ reset_type);
+ spin_unlock_irqrestore(&efi_runtime_lock, flags);
+ return status;
}
void efi_native_runtime_setup(void)
efi.get_variable = virt_efi_get_variable;
efi.get_next_variable = virt_efi_get_next_variable;
efi.set_variable = virt_efi_set_variable;
+ efi.set_variable_nonblocking = virt_efi_set_variable_nonblocking;
efi.get_next_high_mono_count = virt_efi_get_next_high_mono_count;
efi.reset_system = virt_efi_reset_system;
efi.query_variable_info = virt_efi_query_variable_info;
* Print a warning when duplicate EFI variables are encountered and
* disable the sysfs workqueue since the firmware is buggy.
*/
-static void dup_variable_bug(efi_char16_t *s16, efi_guid_t *vendor_guid,
+static void dup_variable_bug(efi_char16_t *str16, efi_guid_t *vendor_guid,
unsigned long len16)
{
size_t i, len8 = len16 / sizeof(efi_char16_t);
- char *s8;
+ char *str8;
/*
* Disable the workqueue since the algorithm it uses for
*/
efivar_wq_enabled = false;
- s8 = kzalloc(len8, GFP_KERNEL);
- if (!s8)
+ str8 = kzalloc(len8, GFP_KERNEL);
+ if (!str8)
return;
for (i = 0; i < len8; i++)
- s8[i] = s16[i];
+ str8[i] = str16[i];
printk(KERN_WARNING "efivars: duplicate variable: %s-%pUl\n",
- s8, vendor_guid);
- kfree(s8);
+ str8, vendor_guid);
+ kfree(str8);
}
/**
}
EXPORT_SYMBOL_GPL(efivar_entry_set);
+/*
+ * efivar_entry_set_nonblocking - call set_variable_nonblocking()
+ *
+ * This function is guaranteed to not block and is suitable for calling
+ * from crash/panic handlers.
+ *
+ * Crucially, this function will not block if it cannot acquire
+ * __efivars->lock. Instead, it returns -EBUSY.
+ */
+static int
+efivar_entry_set_nonblocking(efi_char16_t *name, efi_guid_t vendor,
+ u32 attributes, unsigned long size, void *data)
+{
+ const struct efivar_operations *ops = __efivars->ops;
+ unsigned long flags;
+ efi_status_t status;
+
+ if (!spin_trylock_irqsave(&__efivars->lock, flags))
+ return -EBUSY;
+
+ status = check_var_size(attributes, size + ucs2_strsize(name, 1024));
+ if (status != EFI_SUCCESS) {
+ spin_unlock_irqrestore(&__efivars->lock, flags);
+ return -ENOSPC;
+ }
+
+ status = ops->set_variable_nonblocking(name, &vendor, attributes,
+ size, data);
+
+ spin_unlock_irqrestore(&__efivars->lock, flags);
+ return efi_status_to_err(status);
+}
+
/**
* efivar_entry_set_safe - call set_variable() if enough space in firmware
* @name: buffer containing the variable name
if (!ops->query_variable_store)
return -ENOSYS;
+ /*
+ * If the EFI variable backend provides a non-blocking
+ * ->set_variable() operation and we're in a context where we
+ * cannot block, then we need to use it to avoid live-locks,
+ * since the implication is that the regular ->set_variable()
+ * will block.
+ *
+ * If no ->set_variable_nonblocking() is provided then
+ * ->set_variable() is assumed to be non-blocking.
+ */
+ if (!block && ops->set_variable_nonblocking)
+ return efivar_entry_set_nonblocking(name, vendor, attributes,
+ size, data);
+
if (!block) {
if (!spin_trylock_irqsave(&__efivars->lock, flags))
return -EBUSY;
River Tech's viperboard.h for detailed meaning
of the module parameters.
+config GPIO_DLN2
+ tristate "Diolan DLN2 GPIO support"
+ depends on MFD_DLN2
+ select GPIOLIB_IRQCHIP
+
+ help
+ Select this option to enable GPIO driver for the Diolan DLN2
+ board.
+
+ This driver can also be built as a module. If so, the module
+ will be called gpio-dln2.
+
endif
obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o
obj-$(CONFIG_GPIO_DA9055) += gpio-da9055.o
obj-$(CONFIG_GPIO_DAVINCI) += gpio-davinci.o
+obj-$(CONFIG_GPIO_DLN2) += gpio-dln2.o
obj-$(CONFIG_GPIO_DWAPB) += gpio-dwapb.o
obj-$(CONFIG_GPIO_EM) += gpio-em.o
obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o
--- /dev/null
+/*
+ * Driver for the Diolan DLN-2 USB-GPIO adapter
+ *
+ * Copyright (c) 2014 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/irqdomain.h>
+#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/gpio.h>
+#include <linux/gpio/driver.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/dln2.h>
+
+#define DLN2_GPIO_ID 0x01
+
+#define DLN2_GPIO_GET_PIN_COUNT DLN2_CMD(0x01, DLN2_GPIO_ID)
+#define DLN2_GPIO_SET_DEBOUNCE DLN2_CMD(0x04, DLN2_GPIO_ID)
+#define DLN2_GPIO_GET_DEBOUNCE DLN2_CMD(0x05, DLN2_GPIO_ID)
+#define DLN2_GPIO_PORT_GET_VAL DLN2_CMD(0x06, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_GET_VAL DLN2_CMD(0x0B, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_SET_OUT_VAL DLN2_CMD(0x0C, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_GET_OUT_VAL DLN2_CMD(0x0D, DLN2_GPIO_ID)
+#define DLN2_GPIO_CONDITION_MET_EV DLN2_CMD(0x0F, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_ENABLE DLN2_CMD(0x10, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_DISABLE DLN2_CMD(0x11, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_SET_DIRECTION DLN2_CMD(0x13, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_GET_DIRECTION DLN2_CMD(0x14, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_SET_EVENT_CFG DLN2_CMD(0x1E, DLN2_GPIO_ID)
+#define DLN2_GPIO_PIN_GET_EVENT_CFG DLN2_CMD(0x1F, DLN2_GPIO_ID)
+
+#define DLN2_GPIO_EVENT_NONE 0
+#define DLN2_GPIO_EVENT_CHANGE 1
+#define DLN2_GPIO_EVENT_LVL_HIGH 2
+#define DLN2_GPIO_EVENT_LVL_LOW 3
+#define DLN2_GPIO_EVENT_CHANGE_RISING 0x11
+#define DLN2_GPIO_EVENT_CHANGE_FALLING 0x21
+#define DLN2_GPIO_EVENT_MASK 0x0F
+
+#define DLN2_GPIO_MAX_PINS 32
+
+struct dln2_irq_work {
+ struct work_struct work;
+ struct dln2_gpio *dln2;
+ int pin;
+ int type;
+};
+
+struct dln2_gpio {
+ struct platform_device *pdev;
+ struct gpio_chip gpio;
+
+ /*
+ * Cache pin direction to save us one transfer, since the hardware has
+ * separate commands to read the in and out values.
+ */
+ DECLARE_BITMAP(output_enabled, DLN2_GPIO_MAX_PINS);
+
+ DECLARE_BITMAP(irqs_masked, DLN2_GPIO_MAX_PINS);
+ DECLARE_BITMAP(irqs_enabled, DLN2_GPIO_MAX_PINS);
+ DECLARE_BITMAP(irqs_pending, DLN2_GPIO_MAX_PINS);
+ struct dln2_irq_work *irq_work;
+};
+
+struct dln2_gpio_pin {
+ __le16 pin;
+};
+
+struct dln2_gpio_pin_val {
+ __le16 pin __packed;
+ u8 value;
+};
+
+static int dln2_gpio_get_pin_count(struct platform_device *pdev)
+{
+ int ret;
+ __le16 count;
+ int len = sizeof(count);
+
+ ret = dln2_transfer_rx(pdev, DLN2_GPIO_GET_PIN_COUNT, &count, &len);
+ if (ret < 0)
+ return ret;
+ if (len < sizeof(count))
+ return -EPROTO;
+
+ return le16_to_cpu(count);
+}
+
+static int dln2_gpio_pin_cmd(struct dln2_gpio *dln2, int cmd, unsigned pin)
+{
+ struct dln2_gpio_pin req = {
+ .pin = cpu_to_le16(pin),
+ };
+
+ return dln2_transfer_tx(dln2->pdev, cmd, &req, sizeof(req));
+}
+
+static int dln2_gpio_pin_val(struct dln2_gpio *dln2, int cmd, unsigned int pin)
+{
+ int ret;
+ struct dln2_gpio_pin req = {
+ .pin = cpu_to_le16(pin),
+ };
+ struct dln2_gpio_pin_val rsp;
+ int len = sizeof(rsp);
+
+ ret = dln2_transfer(dln2->pdev, cmd, &req, sizeof(req), &rsp, &len);
+ if (ret < 0)
+ return ret;
+ if (len < sizeof(rsp) || req.pin != rsp.pin)
+ return -EPROTO;
+
+ return rsp.value;
+}
+
+static int dln2_gpio_pin_get_in_val(struct dln2_gpio *dln2, unsigned int pin)
+{
+ int ret;
+
+ ret = dln2_gpio_pin_val(dln2, DLN2_GPIO_PIN_GET_VAL, pin);
+ if (ret < 0)
+ return ret;
+ return !!ret;
+}
+
+static int dln2_gpio_pin_get_out_val(struct dln2_gpio *dln2, unsigned int pin)
+{
+ int ret;
+
+ ret = dln2_gpio_pin_val(dln2, DLN2_GPIO_PIN_GET_OUT_VAL, pin);
+ if (ret < 0)
+ return ret;
+ return !!ret;
+}
+
+static void dln2_gpio_pin_set_out_val(struct dln2_gpio *dln2,
+ unsigned int pin, int value)
+{
+ struct dln2_gpio_pin_val req = {
+ .pin = cpu_to_le16(pin),
+ .value = value,
+ };
+
+ dln2_transfer_tx(dln2->pdev, DLN2_GPIO_PIN_SET_OUT_VAL, &req,
+ sizeof(req));
+}
+
+#define DLN2_GPIO_DIRECTION_IN 0
+#define DLN2_GPIO_DIRECTION_OUT 1
+
+static int dln2_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+ struct dln2_gpio_pin req = {
+ .pin = cpu_to_le16(offset),
+ };
+ struct dln2_gpio_pin_val rsp;
+ int len = sizeof(rsp);
+ int ret;
+
+ ret = dln2_gpio_pin_cmd(dln2, DLN2_GPIO_PIN_ENABLE, offset);
+ if (ret < 0)
+ return ret;
+
+ /* cache the pin direction */
+ ret = dln2_transfer(dln2->pdev, DLN2_GPIO_PIN_GET_DIRECTION,
+ &req, sizeof(req), &rsp, &len);
+ if (ret < 0)
+ return ret;
+ if (len < sizeof(rsp) || req.pin != rsp.pin) {
+ ret = -EPROTO;
+ goto out_disable;
+ }
+
+ switch (rsp.value) {
+ case DLN2_GPIO_DIRECTION_IN:
+ clear_bit(offset, dln2->output_enabled);
+ return 0;
+ case DLN2_GPIO_DIRECTION_OUT:
+ set_bit(offset, dln2->output_enabled);
+ return 0;
+ default:
+ ret = -EPROTO;
+ goto out_disable;
+ }
+
+out_disable:
+ dln2_gpio_pin_cmd(dln2, DLN2_GPIO_PIN_DISABLE, offset);
+ return ret;
+}
+
+static void dln2_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+
+ dln2_gpio_pin_cmd(dln2, DLN2_GPIO_PIN_DISABLE, offset);
+}
+
+static int dln2_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
+{
+ struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+
+ if (test_bit(offset, dln2->output_enabled))
+ return GPIOF_DIR_OUT;
+
+ return GPIOF_DIR_IN;
+}
+
+static int dln2_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+ struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+ int dir;
+
+ dir = dln2_gpio_get_direction(chip, offset);
+ if (dir < 0)
+ return dir;
+
+ if (dir == GPIOF_DIR_IN)
+ return dln2_gpio_pin_get_in_val(dln2, offset);
+
+ return dln2_gpio_pin_get_out_val(dln2, offset);
+}
+
+static void dln2_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+
+ dln2_gpio_pin_set_out_val(dln2, offset, value);
+}
+
+static int dln2_gpio_set_direction(struct gpio_chip *chip, unsigned offset,
+ unsigned dir)
+{
+ struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+ struct dln2_gpio_pin_val req = {
+ .pin = cpu_to_le16(offset),
+ .value = dir,
+ };
+ int ret;
+
+ ret = dln2_transfer_tx(dln2->pdev, DLN2_GPIO_PIN_SET_DIRECTION,
+ &req, sizeof(req));
+ if (ret < 0)
+ return ret;
+
+ if (dir == DLN2_GPIO_DIRECTION_OUT)
+ set_bit(offset, dln2->output_enabled);
+ else
+ clear_bit(offset, dln2->output_enabled);
+
+ return ret;
+}
+
+static int dln2_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ return dln2_gpio_set_direction(chip, offset, DLN2_GPIO_DIRECTION_IN);
+}
+
+static int dln2_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ return dln2_gpio_set_direction(chip, offset, DLN2_GPIO_DIRECTION_OUT);
+}
+
+static int dln2_gpio_set_debounce(struct gpio_chip *chip, unsigned offset,
+ unsigned debounce)
+{
+ struct dln2_gpio *dln2 = container_of(chip, struct dln2_gpio, gpio);
+ __le32 duration = cpu_to_le32(debounce);
+
+ return dln2_transfer_tx(dln2->pdev, DLN2_GPIO_SET_DEBOUNCE,
+ &duration, sizeof(duration));
+}
+
+static int dln2_gpio_set_event_cfg(struct dln2_gpio *dln2, unsigned pin,
+ unsigned type, unsigned period)
+{
+ struct {
+ __le16 pin;
+ u8 type;
+ __le16 period;
+ } __packed req = {
+ .pin = cpu_to_le16(pin),
+ .type = type,
+ .period = cpu_to_le16(period),
+ };
+
+ return dln2_transfer_tx(dln2->pdev, DLN2_GPIO_PIN_SET_EVENT_CFG,
+ &req, sizeof(req));
+}
+
+static void dln2_irq_work(struct work_struct *w)
+{
+ struct dln2_irq_work *iw = container_of(w, struct dln2_irq_work, work);
+ struct dln2_gpio *dln2 = iw->dln2;
+ u8 type = iw->type & DLN2_GPIO_EVENT_MASK;
+
+ if (test_bit(iw->pin, dln2->irqs_enabled))
+ dln2_gpio_set_event_cfg(dln2, iw->pin, type, 0);
+ else
+ dln2_gpio_set_event_cfg(dln2, iw->pin, DLN2_GPIO_EVENT_NONE, 0);
+}
+
+static void dln2_irq_enable(struct irq_data *irqd)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio);
+ int pin = irqd_to_hwirq(irqd);
+
+ set_bit(pin, dln2->irqs_enabled);
+ schedule_work(&dln2->irq_work[pin].work);
+}
+
+static void dln2_irq_disable(struct irq_data *irqd)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio);
+ int pin = irqd_to_hwirq(irqd);
+
+ clear_bit(pin, dln2->irqs_enabled);
+ schedule_work(&dln2->irq_work[pin].work);
+}
+
+static void dln2_irq_mask(struct irq_data *irqd)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio);
+ int pin = irqd_to_hwirq(irqd);
+
+ set_bit(pin, dln2->irqs_masked);
+}
+
+static void dln2_irq_unmask(struct irq_data *irqd)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio);
+ struct device *dev = dln2->gpio.dev;
+ int pin = irqd_to_hwirq(irqd);
+
+ if (test_and_clear_bit(pin, dln2->irqs_pending)) {
+ int irq;
+
+ irq = irq_find_mapping(dln2->gpio.irqdomain, pin);
+ if (!irq) {
+ dev_err(dev, "pin %d not mapped to IRQ\n", pin);
+ return;
+ }
+
+ generic_handle_irq(irq);
+ }
+}
+
+static int dln2_irq_set_type(struct irq_data *irqd, unsigned type)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(irqd);
+ struct dln2_gpio *dln2 = container_of(gc, struct dln2_gpio, gpio);
+ int pin = irqd_to_hwirq(irqd);
+
+ switch (type) {
+ case IRQ_TYPE_LEVEL_HIGH:
+ dln2->irq_work[pin].type = DLN2_GPIO_EVENT_LVL_HIGH;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ dln2->irq_work[pin].type = DLN2_GPIO_EVENT_LVL_LOW;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ dln2->irq_work[pin].type = DLN2_GPIO_EVENT_CHANGE;
+ break;
+ case IRQ_TYPE_EDGE_RISING:
+ dln2->irq_work[pin].type = DLN2_GPIO_EVENT_CHANGE_RISING;
+ break;
+ case IRQ_TYPE_EDGE_FALLING:
+ dln2->irq_work[pin].type = DLN2_GPIO_EVENT_CHANGE_FALLING;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static struct irq_chip dln2_gpio_irqchip = {
+ .name = "dln2-irq",
+ .irq_enable = dln2_irq_enable,
+ .irq_disable = dln2_irq_disable,
+ .irq_mask = dln2_irq_mask,
+ .irq_unmask = dln2_irq_unmask,
+ .irq_set_type = dln2_irq_set_type,
+};
+
+static void dln2_gpio_event(struct platform_device *pdev, u16 echo,
+ const void *data, int len)
+{
+ int pin, irq;
+ const struct {
+ __le16 count;
+ __u8 type;
+ __le16 pin;
+ __u8 value;
+ } __packed *event = data;
+ struct dln2_gpio *dln2 = platform_get_drvdata(pdev);
+
+ if (len < sizeof(*event)) {
+ dev_err(dln2->gpio.dev, "short event message\n");
+ return;
+ }
+
+ pin = le16_to_cpu(event->pin);
+ if (pin >= dln2->gpio.ngpio) {
+ dev_err(dln2->gpio.dev, "out of bounds pin %d\n", pin);
+ return;
+ }
+
+ irq = irq_find_mapping(dln2->gpio.irqdomain, pin);
+ if (!irq) {
+ dev_err(dln2->gpio.dev, "pin %d not mapped to IRQ\n", pin);
+ return;
+ }
+
+ if (!test_bit(pin, dln2->irqs_enabled))
+ return;
+ if (test_bit(pin, dln2->irqs_masked)) {
+ set_bit(pin, dln2->irqs_pending);
+ return;
+ }
+
+ switch (dln2->irq_work[pin].type) {
+ case DLN2_GPIO_EVENT_CHANGE_RISING:
+ if (event->value)
+ generic_handle_irq(irq);
+ break;
+ case DLN2_GPIO_EVENT_CHANGE_FALLING:
+ if (!event->value)
+ generic_handle_irq(irq);
+ break;
+ default:
+ generic_handle_irq(irq);
+ }
+}
+
+static int dln2_gpio_probe(struct platform_device *pdev)
+{
+ struct dln2_gpio *dln2;
+ struct device *dev = &pdev->dev;
+ int pins;
+ int i, ret;
+
+ pins = dln2_gpio_get_pin_count(pdev);
+ if (pins < 0) {
+ dev_err(dev, "failed to get pin count: %d\n", pins);
+ return pins;
+ }
+ if (pins > DLN2_GPIO_MAX_PINS) {
+ pins = DLN2_GPIO_MAX_PINS;
+ dev_warn(dev, "clamping pins to %d\n", DLN2_GPIO_MAX_PINS);
+ }
+
+ dln2 = devm_kzalloc(&pdev->dev, sizeof(*dln2), GFP_KERNEL);
+ if (!dln2)
+ return -ENOMEM;
+
+ dln2->irq_work = devm_kcalloc(&pdev->dev, pins,
+ sizeof(struct dln2_irq_work), GFP_KERNEL);
+ if (!dln2->irq_work)
+ return -ENOMEM;
+ for (i = 0; i < pins; i++) {
+ INIT_WORK(&dln2->irq_work[i].work, dln2_irq_work);
+ dln2->irq_work[i].pin = i;
+ dln2->irq_work[i].dln2 = dln2;
+ }
+
+ dln2->pdev = pdev;
+
+ dln2->gpio.label = "dln2";
+ dln2->gpio.dev = dev;
+ dln2->gpio.owner = THIS_MODULE;
+ dln2->gpio.base = -1;
+ dln2->gpio.ngpio = pins;
+ dln2->gpio.exported = true;
+ dln2->gpio.can_sleep = true;
+ dln2->gpio.irq_not_threaded = true;
+ dln2->gpio.set = dln2_gpio_set;
+ dln2->gpio.get = dln2_gpio_get;
+ dln2->gpio.request = dln2_gpio_request;
+ dln2->gpio.free = dln2_gpio_free;
+ dln2->gpio.get_direction = dln2_gpio_get_direction;
+ dln2->gpio.direction_input = dln2_gpio_direction_input;
+ dln2->gpio.direction_output = dln2_gpio_direction_output;
+ dln2->gpio.set_debounce = dln2_gpio_set_debounce;
+
+ platform_set_drvdata(pdev, dln2);
+
+ ret = gpiochip_add(&dln2->gpio);
+ if (ret < 0) {
+ dev_err(dev, "failed to add gpio chip: %d\n", ret);
+ goto out;
+ }
+
+ ret = gpiochip_irqchip_add(&dln2->gpio, &dln2_gpio_irqchip, 0,
+ handle_simple_irq, IRQ_TYPE_NONE);
+ if (ret < 0) {
+ dev_err(dev, "failed to add irq chip: %d\n", ret);
+ goto out_gpiochip_remove;
+ }
+
+ ret = dln2_register_event_cb(pdev, DLN2_GPIO_CONDITION_MET_EV,
+ dln2_gpio_event);
+ if (ret) {
+ dev_err(dev, "failed to register event cb: %d\n", ret);
+ goto out_gpiochip_remove;
+ }
+
+ return 0;
+
+out_gpiochip_remove:
+ gpiochip_remove(&dln2->gpio);
+out:
+ return ret;
+}
+
+static int dln2_gpio_remove(struct platform_device *pdev)
+{
+ struct dln2_gpio *dln2 = platform_get_drvdata(pdev);
+ int i;
+
+ dln2_unregister_event_cb(pdev, DLN2_GPIO_CONDITION_MET_EV);
+ for (i = 0; i < dln2->gpio.ngpio; i++)
+ flush_work(&dln2->irq_work[i].work);
+ gpiochip_remove(&dln2->gpio);
+
+ return 0;
+}
+
+static struct platform_driver dln2_gpio_driver = {
+ .driver.name = "dln2-gpio",
+ .probe = dln2_gpio_probe,
+ .remove = dln2_gpio_remove,
+};
+
+module_platform_driver(dln2_gpio_driver);
+
+MODULE_AUTHOR("Daniel Baluta <daniel.baluta@intel.com");
+MODULE_DESCRIPTION("Driver for the Diolan DLN2 GPIO interface");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:dln2-gpio");
tc3589x_gpio->chip = template_chip;
tc3589x_gpio->chip.ngpio = tc3589x->num_gpio;
tc3589x_gpio->chip.dev = &pdev->dev;
- tc3589x_gpio->chip.base = (pdata) ? pdata->gpio_base : -1;
+ tc3589x_gpio->chip.base = -1;
#ifdef CONFIG_OF_GPIO
tc3589x_gpio->chip.of_node = np;
* Tell the DRM core that vblank IRQs aren't going to happen for
* a while. This cleans up any pending vblank events for us.
*/
- drm_vblank_off(dev, dcrtc->num);
+ drm_crtc_vblank_off(&dcrtc->crtc);
/* Handle any pending flip event. */
spin_lock_irq(&dev->event_lock);
armada_drm_crtc_update(dcrtc);
if (dpms_blanked(dpms))
armada_drm_vblank_off(dcrtc);
+ else
+ drm_crtc_vblank_on(&dcrtc->crtc);
}
}
/* Wait for pending flips to complete */
wait_event(dcrtc->frame_wait, !dcrtc->frame_work);
- drm_vblank_pre_modeset(crtc->dev, dcrtc->num);
+ drm_crtc_vblank_off(crtc);
crtc->mode = *adj;
armada_drm_crtc_update(dcrtc);
- drm_vblank_post_modeset(crtc->dev, dcrtc->num);
+ drm_crtc_vblank_on(crtc);
armada_drm_crtc_finish_fb(dcrtc, old_fb, dpms_blanked(dcrtc->dpms));
return 0;
armada_reg_queue_end(work->regs, i);
/*
- * Hold the old framebuffer for the work - DRM appears to drop our
- * reference to the old framebuffer in drm_mode_page_flip_ioctl().
+ * Ensure that we hold a reference on the new framebuffer.
+ * This has to match the behaviour in mode_set.
*/
- drm_framebuffer_reference(work->old_fb);
+ drm_framebuffer_reference(fb);
ret = armada_drm_crtc_queue_frame_work(dcrtc, work);
if (ret) {
- /*
- * Undo our reference above; DRM does not drop the reference
- * to this object on error, so that's okay.
- */
- drm_framebuffer_unreference(work->old_fb);
+ /* Undo our reference above */
+ drm_framebuffer_unreference(fb);
kfree(work);
return ret;
}
if (ret)
goto err_comp;
+ dev->irq_enabled = true;
dev->vblank_disable_allowed = 1;
ret = armada_fbdev_init(dev);
.desc = "Armada SoC DRM",
.date = "20120730",
.driver_features = DRIVER_GEM | DRIVER_MODESET |
- DRIVER_PRIME,
+ DRIVER_HAVE_IRQ | DRIVER_PRIME,
.ioctls = armada_ioctls,
.fops = &armada_drm_fops,
};
static const struct pci_device_id pciidlist[] = {
{ PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_5446, 0x1af4, 0x1100, 0,
0, 0 },
+ { PCI_VENDOR_ID_CIRRUS, PCI_DEVICE_ID_CIRRUS_5446, PCI_VENDOR_ID_XEN,
+ 0x0001, 0, 0, 0 },
{0,}
};
void *data)
{
struct exynos_drm_display *display = dev_get_drvdata(dev);
- struct exynos_dp_device *dp = display->ctx;
- struct drm_encoder *encoder = dp->encoder;
exynos_dp_dpms(display, DRM_MODE_DPMS_OFF);
-
- exynos_dp_connector_destroy(&dp->connector);
- encoder->funcs->destroy(encoder);
}
static const struct component_ops exynos_dp_ops = {
!atomic_read(&exynos_crtc->pending_flip),
HZ/20))
atomic_set(&exynos_crtc->pending_flip, 0);
- drm_vblank_off(crtc->dev, exynos_crtc->pipe);
+ drm_crtc_vblank_off(crtc);
}
if (manager->ops->dpms)
manager->ops->dpms(manager, mode);
exynos_crtc->dpms = mode;
+
+ if (mode == DRM_MODE_DPMS_ON)
+ drm_crtc_vblank_on(crtc);
}
static void exynos_drm_crtc_prepare(struct drm_crtc *crtc)
int exynos_dpi_remove(struct device *dev)
{
- struct drm_encoder *encoder = exynos_dpi_display.encoder;
struct exynos_dpi *ctx = exynos_dpi_display.ctx;
exynos_dpi_dpms(&exynos_dpi_display, DRM_MODE_DPMS_OFF);
- exynos_dpi_connector_destroy(&ctx->connector);
- encoder->funcs->destroy(encoder);
-
if (ctx->panel)
drm_panel_detach(ctx->panel);
plane = exynos_plane_init(dev, possible_crtcs,
DRM_PLANE_TYPE_OVERLAY);
- if (IS_ERR(plane))
- goto err_mode_config_cleanup;
- }
-
- /* init kms poll for handling hpd */
- drm_kms_helper_poll_init(dev);
+ if (!IS_ERR(plane))
+ continue;
- ret = drm_vblank_init(dev, MAX_CRTC);
- if (ret)
+ ret = PTR_ERR(plane);
goto err_mode_config_cleanup;
+ }
/* setup possible_clones. */
exynos_drm_encoder_setup(dev);
/* Try to bind all sub drivers. */
ret = component_bind_all(dev->dev, dev);
if (ret)
- goto err_cleanup_vblank;
+ goto err_mode_config_cleanup;
- /* Probe non kms sub drivers and virtual display driver. */
- ret = exynos_drm_device_subdrv_probe(dev);
+ ret = drm_vblank_init(dev, dev->mode_config.num_crtc);
if (ret)
goto err_unbind_all;
- /* force connectors detection */
- drm_helper_hpd_irq_event(dev);
+ /* Probe non kms sub drivers and virtual display driver. */
+ ret = exynos_drm_device_subdrv_probe(dev);
+ if (ret)
+ goto err_cleanup_vblank;
/*
* enable drm irq mode.
*/
dev->vblank_disable_allowed = true;
+ /* init kms poll for handling hpd */
+ drm_kms_helper_poll_init(dev);
+
+ /* force connectors detection */
+ drm_helper_hpd_irq_event(dev);
+
return 0;
-err_unbind_all:
- component_unbind_all(dev->dev, dev);
err_cleanup_vblank:
drm_vblank_cleanup(dev);
+err_unbind_all:
+ component_unbind_all(dev->dev, dev);
err_mode_config_cleanup:
drm_mode_config_cleanup(dev);
drm_release_iommu_mapping(dev);
exynos_drm_fbdev_fini(dev);
drm_kms_helper_poll_fini(dev);
- component_unbind_all(dev->dev, dev);
drm_vblank_cleanup(dev);
+ component_unbind_all(dev->dev, dev);
drm_mode_config_cleanup(dev);
drm_release_iommu_mapping(dev);
drm_modeset_lock_all(dev);
list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- if (connector->funcs->dpms)
- connector->funcs->dpms(connector, connector->dpms);
+ if (connector->funcs->dpms) {
+ int dpms = connector->dpms;
+
+ connector->dpms = DRM_MODE_DPMS_OFF;
+ connector->funcs->dpms(connector, dpms);
+ }
}
drm_modeset_unlock_all(dev);
mutex_lock(&drm_component_lock);
+ /* Do not retry to probe if there is no any kms driver regitered. */
+ if (list_empty(&drm_component_list)) {
+ mutex_unlock(&drm_component_lock);
+ return ERR_PTR(-ENODEV);
+ }
+
list_for_each_entry(cdev, &drm_component_list, list) {
/*
* Add components to master only in case that crtc and
goto err_unregister_mixer_drv;
#endif
+ match = exynos_drm_match_add(&pdev->dev);
+ if (IS_ERR(match)) {
+ ret = PTR_ERR(match);
+ goto err_unregister_hdmi_drv;
+ }
+
+ ret = component_master_add_with_match(&pdev->dev, &exynos_drm_ops,
+ match);
+ if (ret < 0)
+ goto err_unregister_hdmi_drv;
+
#ifdef CONFIG_DRM_EXYNOS_G2D
ret = platform_driver_register(&g2d_driver);
if (ret < 0)
- goto err_unregister_hdmi_drv;
+ goto err_del_component_master;
#endif
#ifdef CONFIG_DRM_EXYNOS_FIMC
goto err_unregister_ipp_drv;
#endif
- match = exynos_drm_match_add(&pdev->dev);
- if (IS_ERR(match)) {
- ret = PTR_ERR(match);
- goto err_unregister_resources;
- }
-
- ret = component_master_add_with_match(&pdev->dev, &exynos_drm_ops,
- match);
- if (ret < 0)
- goto err_unregister_resources;
-
return ret;
-err_unregister_resources:
-
#ifdef CONFIG_DRM_EXYNOS_IPP
- exynos_platform_device_ipp_unregister();
err_unregister_ipp_drv:
platform_driver_unregister(&ipp_driver);
err_unregister_gsc_drv:
#ifdef CONFIG_DRM_EXYNOS_G2D
platform_driver_unregister(&g2d_driver);
-err_unregister_hdmi_drv:
+err_del_component_master:
#endif
+ component_master_del(&pdev->dev, &exynos_drm_ops);
+err_unregister_hdmi_drv:
#ifdef CONFIG_DRM_EXYNOS_HDMI
platform_driver_unregister(&hdmi_driver);
err_unregister_mixer_drv:
{
int ret;
+ /*
+ * Register device object only in case of Exynos SoC.
+ *
+ * Below codes resolves temporarily infinite loop issue incurred
+ * by Exynos drm driver when using multi-platform kernel.
+ * So these codes will be replaced with more generic way later.
+ */
+ if (!of_machine_is_compatible("samsung,exynos3") &&
+ !of_machine_is_compatible("samsung,exynos4") &&
+ !of_machine_is_compatible("samsung,exynos5"))
+ return -ENODEV;
+
exynos_drm_pdev = platform_device_register_simple("exynos-drm", -1,
NULL, 0);
if (IS_ERR(exynos_drm_pdev))
void *data)
{
struct exynos_dsi *dsi = exynos_dsi_display.ctx;
- struct drm_encoder *encoder = dsi->encoder;
exynos_dsi_dpms(&exynos_dsi_display, DRM_MODE_DPMS_OFF);
- exynos_dsi_connector_destroy(&dsi->connector);
- encoder->funcs->destroy(encoder);
-
mipi_dsi_host_unregister(&dsi->dsi_host);
}
struct exynos_drm_subdrv *subdrv = &g2d->subdrv;
kfree(g2d->cmdlist_node);
- dma_free_attrs(subdrv->drm_dev->dev, G2D_CMDLIST_POOL_SIZE,
- g2d->cmdlist_pool_virt,
- g2d->cmdlist_pool, &g2d->cmdlist_dma_attrs);
+
+ if (g2d->cmdlist_pool_virt && g2d->cmdlist_pool) {
+ dma_free_attrs(subdrv->drm_dev->dev, G2D_CMDLIST_POOL_SIZE,
+ g2d->cmdlist_pool_virt,
+ g2d->cmdlist_pool, &g2d->cmdlist_dma_attrs);
+ }
}
static struct g2d_cmdlist_node *g2d_get_cmdlist(struct g2d_data *g2d)
{
struct exynos_drm_manager *mgr = platform_get_drvdata(pdev);
struct vidi_context *ctx = mgr->ctx;
- struct drm_encoder *encoder = ctx->encoder;
if (ctx->raw_edid != (struct edid *)fake_edid_info) {
kfree(ctx->raw_edid);
return -EINVAL;
}
- encoder->funcs->destroy(encoder);
- drm_connector_cleanup(&ctx->connector);
-
return 0;
}
static void hdmi_unbind(struct device *dev, struct device *master, void *data)
{
- struct exynos_drm_display *display = get_hdmi_display(dev);
- struct drm_encoder *encoder = display->encoder;
- struct hdmi_context *hdata = display->ctx;
-
- hdmi_connector_destroy(&hdata->connector);
- encoder->funcs->destroy(encoder);
}
static const struct component_ops hdmi_component_ops = {
goto out_regs;
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
- ret = i915_kick_out_vgacon(dev_priv);
+ /* WARNING: Apparently we must kick fbdev drivers before vgacon,
+ * otherwise the vga fbdev driver falls over. */
+ ret = i915_kick_out_firmware_fb(dev_priv);
if (ret) {
- DRM_ERROR("failed to remove conflicting VGA console\n");
+ DRM_ERROR("failed to remove conflicting framebuffer drivers\n");
goto out_gtt;
}
- ret = i915_kick_out_firmware_fb(dev_priv);
+ ret = i915_kick_out_vgacon(dev_priv);
if (ret) {
- DRM_ERROR("failed to remove conflicting framebuffer drivers\n");
+ DRM_ERROR("failed to remove conflicting VGA console\n");
goto out_gtt;
}
}
return i915_drm_freeze(drm_dev);
}
+static int i915_pm_freeze_late(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct drm_device *drm_dev = pci_get_drvdata(pdev);
+ struct drm_i915_private *dev_priv = drm_dev->dev_private;
+
+ return intel_suspend_complete(dev_priv);
+}
+
static int i915_pm_thaw_early(struct device *dev)
{
struct pci_dev *pdev = to_pci_dev(dev);
.resume_early = i915_pm_resume_early,
.resume = i915_pm_resume,
.freeze = i915_pm_freeze,
+ .freeze_late = i915_pm_freeze_late,
.thaw_early = i915_pm_thaw_early,
.thaw = i915_pm_thaw,
.poweroff = i915_pm_poweroff,
GEN8_PPAT(6, GEN8_PPAT_WB | GEN8_PPAT_LLCELLC | GEN8_PPAT_AGE(2)) |
GEN8_PPAT(7, GEN8_PPAT_WB | GEN8_PPAT_LLCELLC | GEN8_PPAT_AGE(3));
+ if (!USES_PPGTT(dev_priv->dev))
+ /* Spec: "For GGTT, there is NO pat_sel[2:0] from the entry,
+ * so RTL will always use the value corresponding to
+ * pat_sel = 000".
+ * So let's disable cache for GGTT to avoid screen corruptions.
+ * MOCS still can be used though.
+ * - System agent ggtt writes (i.e. cpu gtt mmaps) already work
+ * before this patch, i.e. the same uncached + snooping access
+ * like on gen6/7 seems to be in effect.
+ * - So this just fixes blitter/render access. Again it looks
+ * like it's not just uncached access, but uncached + snooping.
+ * So we can still hold onto all our assumptions wrt cpu
+ * clflushing on LLC machines.
+ */
+ pat = GEN8_PPAT(0, GEN8_PPAT_UC);
+
/* XXX: spec defines this as 2 distinct registers. It's unclear if a 64b
* write would work. */
I915_WRITE(GEN8_PRIVATE_PAT, pat);
* has to also include the unfenced register the GPU uses
* whilst executing a fenced command for an untiled object.
*/
-
- obj->map_and_fenceable =
- !i915_gem_obj_ggtt_bound(obj) ||
- (i915_gem_obj_ggtt_offset(obj) +
- obj->base.size <= dev_priv->gtt.mappable_end &&
- i915_gem_object_fence_ok(obj, args->tiling_mode));
-
- /* Rebind if we need a change of alignment */
- if (!obj->map_and_fenceable) {
- u32 unfenced_align =
- i915_gem_get_gtt_alignment(dev, obj->base.size,
- args->tiling_mode,
- false);
- if (i915_gem_obj_ggtt_offset(obj) & (unfenced_align - 1))
- ret = i915_gem_object_ggtt_unbind(obj);
- }
+ if (obj->map_and_fenceable &&
+ !i915_gem_object_fence_ok(obj, args->tiling_mode))
+ ret = i915_gem_object_ggtt_unbind(obj);
if (ret == 0) {
obj->fence_dirty =
#define HPD_STORM_DETECT_PERIOD 1000
#define HPD_STORM_THRESHOLD 5
-static int ilk_port_to_hotplug_shift(enum port port)
+static int pch_port_to_hotplug_shift(enum port port)
{
switch (port) {
case PORT_A:
}
}
-static int g4x_port_to_hotplug_shift(enum port port)
+static int i915_port_to_hotplug_shift(enum port port)
{
switch (port) {
case PORT_A:
if (port && dev_priv->hpd_irq_port[port]) {
bool long_hpd;
- if (IS_G4X(dev)) {
- dig_shift = g4x_port_to_hotplug_shift(port);
- long_hpd = (hotplug_trigger >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT;
- } else {
- dig_shift = ilk_port_to_hotplug_shift(port);
+ if (HAS_PCH_SPLIT(dev)) {
+ dig_shift = pch_port_to_hotplug_shift(port);
long_hpd = (dig_hotplug_reg >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT;
+ } else {
+ dig_shift = i915_port_to_hotplug_shift(port);
+ long_hpd = (hotplug_trigger >> dig_shift) & PORTB_HOTPLUG_LONG_DETECT;
}
DRM_DEBUG_DRIVER("digital hpd port %c - %s\n",
void gen8_irq_power_well_post_enable(struct drm_i915_private *dev_priv)
{
unsigned long irqflags;
+ uint32_t extra_ier = GEN8_PIPE_VBLANK | GEN8_PIPE_FIFO_UNDERRUN;
spin_lock_irqsave(&dev_priv->irq_lock, irqflags);
GEN8_IRQ_INIT_NDX(DE_PIPE, PIPE_B, dev_priv->de_irq_mask[PIPE_B],
- ~dev_priv->de_irq_mask[PIPE_B]);
+ ~dev_priv->de_irq_mask[PIPE_B] | extra_ier);
GEN8_IRQ_INIT_NDX(DE_PIPE, PIPE_C, dev_priv->de_irq_mask[PIPE_C],
- ~dev_priv->de_irq_mask[PIPE_C]);
+ ~dev_priv->de_irq_mask[PIPE_C] | extra_ier);
spin_unlock_irqrestore(&dev_priv->irq_lock, irqflags);
}
DRM_FORMAT_ARGB8888,
};
-#define DIV_ROUND_CLOSEST_ULL(ll, d) \
-({ unsigned long long _tmp = (ll)+(d)/2; do_div(_tmp, d); _tmp; })
-
static void intel_increase_pllclock(struct drm_device *dev,
enum pipe pipe);
static void intel_crtc_update_cursor(struct drm_crtc *crtc, bool on);
ironlake_fdi_disable(crtc);
ironlake_disable_pch_transcoder(dev_priv, pipe);
- intel_set_pch_fifo_underrun_reporting(dev, pipe, true);
if (HAS_PCH_CPT(dev)) {
/* disable TRANS_DP_CTL */
if (intel_crtc->config.has_pch_encoder) {
lpt_disable_pch_transcoder(dev_priv);
- intel_set_pch_fifo_underrun_reporting(dev, TRANSCODER_A, true);
intel_ddi_fdi_disable(crtc);
}
* BSpec erroneously claims we should aim for 4MHz, but
* in fact 1MHz is the correct frequency.
*/
- I915_WRITE(GMBUSFREQ_VLV, dev_priv->vlv_cdclk_freq);
+ I915_WRITE(GMBUSFREQ_VLV, DIV_ROUND_UP(dev_priv->vlv_cdclk_freq, 1000));
}
/* Adjust CDclk dividers to allow high res or save power if possible */
struct drm_device *dev = crtc->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
+ if (i915_reset_in_progress(&dev_priv->gpu_error) ||
+ crtc->reset_counter != atomic_read(&dev_priv->gpu_error.reset_counter))
+ return true;
+
/*
* The relevant registers doen't exist on pre-ctg.
* As the flip done interrupt doesn't trigger for mmio
if (I915_READ(PCH_DP_D) & DP_DETECTED)
intel_dp_init(dev, PCH_DP_D, PORT_D);
} else if (IS_VALLEYVIEW(dev)) {
- if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIB) & SDVO_DETECTED) {
+ /*
+ * The DP_DETECTED bit is the latched state of the DDC
+ * SDA pin at boot. However since eDP doesn't require DDC
+ * (no way to plug in a DP->HDMI dongle) the DDC pins for
+ * eDP ports may have been muxed to an alternate function.
+ * Thus we can't rely on the DP_DETECTED bit alone to detect
+ * eDP ports. Consult the VBT as well as DP_DETECTED to
+ * detect eDP ports.
+ */
+ if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIB) & SDVO_DETECTED)
intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIB,
PORT_B);
- if (I915_READ(VLV_DISPLAY_BASE + DP_B) & DP_DETECTED)
- intel_dp_init(dev, VLV_DISPLAY_BASE + DP_B, PORT_B);
- }
+ if (I915_READ(VLV_DISPLAY_BASE + DP_B) & DP_DETECTED ||
+ intel_dp_is_edp(dev, PORT_B))
+ intel_dp_init(dev, VLV_DISPLAY_BASE + DP_B, PORT_B);
- if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIC) & SDVO_DETECTED) {
+ if (I915_READ(VLV_DISPLAY_BASE + GEN4_HDMIC) & SDVO_DETECTED)
intel_hdmi_init(dev, VLV_DISPLAY_BASE + GEN4_HDMIC,
PORT_C);
- if (I915_READ(VLV_DISPLAY_BASE + DP_C) & DP_DETECTED)
- intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C, PORT_C);
- }
+ if (I915_READ(VLV_DISPLAY_BASE + DP_C) & DP_DETECTED ||
+ intel_dp_is_edp(dev, PORT_C))
+ intel_dp_init(dev, VLV_DISPLAY_BASE + DP_C, PORT_C);
if (IS_CHERRYVIEW(dev)) {
- if (I915_READ(VLV_DISPLAY_BASE + CHV_HDMID) & SDVO_DETECTED) {
+ if (I915_READ(VLV_DISPLAY_BASE + CHV_HDMID) & SDVO_DETECTED)
intel_hdmi_init(dev, VLV_DISPLAY_BASE + CHV_HDMID,
PORT_D);
- if (I915_READ(VLV_DISPLAY_BASE + DP_D) & DP_DETECTED)
- intel_dp_init(dev, VLV_DISPLAY_BASE + DP_D, PORT_D);
- }
+ /* eDP not supported on port D, so don't check VBT */
+ if (I915_READ(VLV_DISPLAY_BASE + DP_D) & DP_DETECTED)
+ intel_dp_init(dev, VLV_DISPLAY_BASE + DP_D, PORT_D);
}
intel_dsi_init(dev);
/* Acer C720 Chromebook (Core i3 4005U) */
{ 0x0a16, 0x1025, 0x0a11, quirk_backlight_present },
+ /* Apple Macbook 2,1 (Core 2 T7400) */
+ { 0x27a2, 0x8086, 0x7270, quirk_backlight_present },
+
/* Toshiba CB35 Chromebook (Celeron 2955U) */
{ 0x0a06, 0x1179, 0x0a88, quirk_backlight_present },
ssize_t ret;
int i;
+ /*
+ * Sometime we just get the same incorrect byte repeated
+ * over the entire buffer. Doing just one throw away read
+ * initially seems to "solve" it.
+ */
+ drm_dp_dpcd_read(aux, DP_DPCD_REV, buffer, 1);
+
for (i = 0; i < 3; i++) {
ret = drm_dp_dpcd_read(aux, offset, buffer, size);
if (ret == size)
}
}
- /* Training Pattern 3 support */
+ /* Training Pattern 3 support, both source and sink */
if (intel_dp->dpcd[DP_DPCD_REV] >= 0x12 &&
- intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_TPS3_SUPPORTED) {
+ intel_dp->dpcd[DP_MAX_LANE_COUNT] & DP_TPS3_SUPPORTED &&
+ (IS_HASWELL(dev_priv) || INTEL_INFO(dev_priv)->gen >= 8)) {
intel_dp->use_tps3 = true;
DRM_DEBUG_KMS("Displayport TPS3 supported\n");
} else
* vdd might still be enabled do to the delayed vdd off.
* Make sure vdd is actually turned off here.
*/
+ cancel_delayed_work_sync(&intel_dp->panel_vdd_work);
pps_lock(intel_dp);
edp_panel_vdd_off_sync(intel_dp);
pps_unlock(intel_dp);
if (intel_dig_port->base.type != INTEL_OUTPUT_EDP)
intel_dig_port->base.type = INTEL_OUTPUT_DISPLAYPORT;
+ if (long_hpd && intel_dig_port->base.type == INTEL_OUTPUT_EDP) {
+ /*
+ * vdd off can generate a long pulse on eDP which
+ * would require vdd on to handle it, and thus we
+ * would end up in an endless cycle of
+ * "vdd off -> long hpd -> vdd on -> detect -> vdd off -> ..."
+ */
+ DRM_DEBUG_KMS("ignoring long hpd on eDP port %c\n",
+ port_name(intel_dig_port->port));
+ return false;
+ }
+
DRM_DEBUG_KMS("got hpd irq on port %c - %s\n",
port_name(intel_dig_port->port),
long_hpd ? "long" : "short");
#include <drm/drm_fb_helper.h>
#include <drm/drm_dp_mst_helper.h>
+#define DIV_ROUND_CLOSEST_ULL(ll, d) \
+({ unsigned long long _tmp = (ll)+(d)/2; do_div(_tmp, d); _tmp; })
+
/**
* _wait_for - magic (register) wait macro
*
int pipe;
u8 pin;
+ /*
+ * Unlock registers and just leave them unlocked. Do this before
+ * checking quirk lists to avoid bogus WARNINGs.
+ */
+ if (HAS_PCH_SPLIT(dev)) {
+ I915_WRITE(PCH_PP_CONTROL,
+ I915_READ(PCH_PP_CONTROL) | PANEL_UNLOCK_REGS);
+ } else {
+ I915_WRITE(PP_CONTROL,
+ I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS);
+ }
if (!intel_lvds_supported(dev))
return;
lvds_encoder->a3_power = I915_READ(lvds_encoder->reg) &
LVDS_A3_POWER_MASK;
- /*
- * Unlock registers and just
- * leave them unlocked
- */
- if (HAS_PCH_SPLIT(dev)) {
- I915_WRITE(PCH_PP_CONTROL,
- I915_READ(PCH_PP_CONTROL) | PANEL_UNLOCK_REGS);
- } else {
- I915_WRITE(PP_CONTROL,
- I915_READ(PP_CONTROL) | PANEL_UNLOCK_REGS);
- }
lvds_connector->lid_notifier.notifier_call = intel_lid_notify;
if (acpi_lid_notifier_register(&lvds_connector->lid_notifier)) {
DRM_DEBUG_KMS("lid notifier registration failed\n");
source_val = clamp(source_val, source_min, source_max);
/* avoid overflows */
- target_val = (uint64_t)(source_val - source_min) *
- (target_max - target_min);
- do_div(target_val, source_max - source_min);
+ target_val = DIV_ROUND_CLOSEST_ULL((uint64_t)(source_val - source_min) *
+ (target_max - target_min), source_max - source_min);
target_val += target_min;
return target_val;
struct drm_device *dev = connector->base.dev;
struct drm_i915_private *dev_priv = dev->dev_private;
struct intel_panel *panel = &connector->panel;
+ int min;
WARN_ON(panel->backlight.max == 0);
+ /*
+ * XXX: If the vbt value is 255, it makes min equal to max, which leads
+ * to problems. There are such machines out there. Either our
+ * interpretation is wrong or the vbt has bogus data. Or both. Safeguard
+ * against this by letting the minimum be at most (arbitrarily chosen)
+ * 25% of the max.
+ */
+ min = clamp_t(int, dev_priv->vbt.backlight.min_brightness, 0, 64);
+ if (min != dev_priv->vbt.backlight.min_brightness) {
+ DRM_DEBUG_KMS("clamping VBT min backlight %d/255 to %d/255\n",
+ dev_priv->vbt.backlight.min_brightness, min);
+ }
+
/* vbt value is a coefficient in range [0..255] */
- return scale(dev_priv->vbt.backlight.min_brightness, 0, 255,
- 0, panel->backlight.max);
+ return scale(min, 0, 255, 0, panel->backlight.max);
}
static int bdw_setup_backlight(struct intel_connector *connector)
I915_WRITE(_3D_CHICKEN,
_MASKED_BIT_ENABLE(_3D_CHICKEN_HIZ_PLANE_DISABLE_MSAA_4X_SNB));
- /* WaSetupGtModeTdRowDispatch:snb */
- if (IS_SNB_GT1(dev))
- I915_WRITE(GEN6_GT_MODE,
- _MASKED_BIT_ENABLE(GEN6_TD_FOUR_ROW_DISPATCH_DISABLE));
-
/* WaDisable_RenderCache_OperationalFlush:snb */
I915_WRITE(CACHE_MODE_0, _MASKED_BIT_DISABLE(RC_OP_FLUSH_ENABLE));
device->oclass[NVDEV_ENGINE_BSP ] = &nvc0_bsp_oclass;
device->oclass[NVDEV_ENGINE_PPP ] = &nvc0_ppp_oclass;
device->oclass[NVDEV_ENGINE_COPY0 ] = &nvc0_copy0_oclass;
- device->oclass[NVDEV_ENGINE_COPY1 ] = &nvc0_copy1_oclass;
device->oclass[NVDEV_ENGINE_DISP ] = nva3_disp_oclass;
device->oclass[NVDEV_ENGINE_PERFMON] = &nvc0_perfmon_oclass;
break;
}
if (status & 0x40000000) {
- nouveau_fifo_uevent(&priv->base);
nv_wr32(priv, 0x002100, 0x40000000);
+ nouveau_fifo_uevent(&priv->base);
status &= ~0x40000000;
}
}
u32 inte = nv_rd32(priv, 0x002628);
u32 unkn;
+ nv_wr32(priv, 0x0025a8 + (engn * 0x04), intr);
+
for (unkn = 0; unkn < 8; unkn++) {
u32 ints = (intr >> (unkn * 0x04)) & inte;
if (ints & 0x1) {
nv_mask(priv, 0x002628, ints, 0);
}
}
-
- nv_wr32(priv, 0x0025a8 + (engn * 0x04), intr);
}
static void
}
if (stat & 0x80000000) {
- nve0_fifo_intr_engine(priv);
nv_wr32(priv, 0x002100, 0x80000000);
+ nve0_fifo_intr_engine(priv);
stat &= ~0x80000000;
}
#define IS_NVA3F(x) (((x) > 0xa0 && (x) < 0xaa) || (x) == 0xaf)
#define IS_NVAAF(x) ((x) >= 0xaa && (x) <= 0xac)
+#include <subdev/fb.h>
+
/*
* This code deals with PGRAPH contexts on NV50 family cards. Like NV40, it's
* the GPU itself that does context-switching, but it needs a special
gr_def(ctx, 0x407d08, 0x00010040);
else if (device->chipset < 0xa0)
gr_def(ctx, 0x407d08, 0x00390040);
- else
- gr_def(ctx, 0x407d08, 0x003d0040);
+ else {
+ if (nouveau_fb(device)->ram->type != NV_MEM_TYPE_GDDR5)
+ gr_def(ctx, 0x407d08, 0x003d0040);
+ else
+ gr_def(ctx, 0x407d08, 0x003c0040);
+ }
gr_def(ctx, 0x407d0c, 0x00000022);
}
struct nouveau_fb base;
};
+static int
+gk20a_fb_init(struct nouveau_object *object)
+{
+ struct gk20a_fb_priv *priv = (void *)object;
+ int ret;
+
+ ret = nouveau_fb_init(&priv->base);
+ if (ret)
+ return ret;
+
+ nv_mask(priv, 0x100c80, 0x00000001, 0x00000000); /* 128KiB lpg */
+ return 0;
+}
+
static int
gk20a_fb_ctor(struct nouveau_object *parent, struct nouveau_object *engine,
struct nouveau_oclass *oclass, void *data, u32 size,
.base.ofuncs = &(struct nouveau_ofuncs) {
.ctor = gk20a_fb_ctor,
.dtor = _nouveau_fb_dtor,
- .init = _nouveau_fb_init,
+ .init = gk20a_fb_init,
.fini = _nouveau_fb_fini,
},
.memtype = nvc0_fb_memtype_valid,
struct nouveau_channel **pchan)
{
struct nouveau_cli *cli = (void *)nvif_client(&device->base);
+ bool super;
int ret;
+ /* hack until fencenv50 is fixed, and agp access relaxed */
+ super = cli->base.super;
+ cli->base.super = true;
+
ret = nouveau_channel_ind(drm, device, handle, arg0, pchan);
if (ret) {
NV_PRINTK(debug, cli, "ib channel create, %d\n", ret);
ret = nouveau_channel_dma(drm, device, handle, pchan);
if (ret) {
NV_PRINTK(debug, cli, "dma channel create, %d\n", ret);
- return ret;
+ goto done;
}
}
if (ret) {
NV_PRINTK(error, cli, "channel failed to initialise, %d\n", ret);
nouveau_channel_del(pchan);
- return ret;
}
- return 0;
+done:
+ cli->base.super = super;
+ return ret;
}
pci_save_state(pdev);
pci_disable_device(pdev);
- pci_ignore_hotplug(pdev);
pci_set_power_state(pdev, PCI_D3hot);
return 0;
}
ret = nouveau_do_suspend(drm_dev, true);
pci_save_state(pdev);
pci_disable_device(pdev);
+ pci_ignore_hotplug(pdev);
pci_set_power_state(pdev, PCI_D3cold);
drm_dev->switch_power_state = DRM_SWITCH_POWER_DYNAMIC_OFF;
return ret;
return container_of(fence->base.lock, struct nouveau_fence_chan, lock);
}
-static void
+static int
nouveau_fence_signal(struct nouveau_fence *fence)
{
+ int drop = 0;
+
fence_signal_locked(&fence->base);
list_del(&fence->head);
+ rcu_assign_pointer(fence->channel, NULL);
if (test_bit(FENCE_FLAG_USER_BITS, &fence->base.flags)) {
struct nouveau_fence_chan *fctx = nouveau_fctx(fence);
if (!--fctx->notify_ref)
- nvif_notify_put(&fctx->notify);
+ drop = 1;
}
fence_put(&fence->base);
+ return drop;
}
static struct nouveau_fence *
{
struct nouveau_fence *fence;
- nvif_notify_fini(&fctx->notify);
-
spin_lock_irq(&fctx->lock);
while (!list_empty(&fctx->pending)) {
fence = list_entry(fctx->pending.next, typeof(*fence), head);
- nouveau_fence_signal(fence);
- fence->channel = NULL;
+ if (nouveau_fence_signal(fence))
+ nvif_notify_put(&fctx->notify);
}
spin_unlock_irq(&fctx->lock);
+
+ nvif_notify_fini(&fctx->notify);
+ fctx->dead = 1;
+
+ /*
+ * Ensure that all accesses to fence->channel complete before freeing
+ * the channel.
+ */
+ synchronize_rcu();
}
static void
kref_put(&fctx->fence_ref, nouveau_fence_context_put);
}
-static void
+static int
nouveau_fence_update(struct nouveau_channel *chan, struct nouveau_fence_chan *fctx)
{
struct nouveau_fence *fence;
-
+ int drop = 0;
u32 seq = fctx->read(chan);
while (!list_empty(&fctx->pending)) {
fence = list_entry(fctx->pending.next, typeof(*fence), head);
if ((int)(seq - fence->base.seqno) < 0)
- return;
+ break;
- nouveau_fence_signal(fence);
+ drop |= nouveau_fence_signal(fence);
}
+
+ return drop;
}
static int
struct nouveau_fence_chan *fctx =
container_of(notify, typeof(*fctx), notify);
unsigned long flags;
+ int ret = NVIF_NOTIFY_KEEP;
spin_lock_irqsave(&fctx->lock, flags);
if (!list_empty(&fctx->pending)) {
struct nouveau_fence *fence;
+ struct nouveau_channel *chan;
fence = list_entry(fctx->pending.next, typeof(*fence), head);
- nouveau_fence_update(fence->channel, fctx);
+ chan = rcu_dereference_protected(fence->channel, lockdep_is_held(&fctx->lock));
+ if (nouveau_fence_update(fence->channel, fctx))
+ ret = NVIF_NOTIFY_DROP;
}
spin_unlock_irqrestore(&fctx->lock, flags);
- /* Always return keep here. NVIF refcount is handled with nouveau_fence_update */
- return NVIF_NOTIFY_KEEP;
+ return ret;
}
void
if (!ret) {
fence_get(&fence->base);
spin_lock_irq(&fctx->lock);
- nouveau_fence_update(chan, fctx);
+
+ if (nouveau_fence_update(chan, fctx))
+ nvif_notify_put(&fctx->notify);
+
list_add_tail(&fence->head, &fctx->pending);
spin_unlock_irq(&fctx->lock);
}
if (fence->base.ops == &nouveau_fence_ops_legacy ||
fence->base.ops == &nouveau_fence_ops_uevent) {
struct nouveau_fence_chan *fctx = nouveau_fctx(fence);
+ struct nouveau_channel *chan;
unsigned long flags;
if (test_bit(FENCE_FLAG_SIGNALED_BIT, &fence->base.flags))
return true;
spin_lock_irqsave(&fctx->lock, flags);
- nouveau_fence_update(fence->channel, fctx);
+ chan = rcu_dereference_protected(fence->channel, lockdep_is_held(&fctx->lock));
+ if (chan && nouveau_fence_update(chan, fctx))
+ nvif_notify_put(&fctx->notify);
spin_unlock_irqrestore(&fctx->lock, flags);
}
return fence_is_signaled(&fence->base);
if (fence && (!exclusive || !fobj || !fobj->shared_count)) {
struct nouveau_channel *prev = NULL;
+ bool must_wait = true;
f = nouveau_local_fence(fence, chan->drm);
- if (f)
- prev = f->channel;
+ if (f) {
+ rcu_read_lock();
+ prev = rcu_dereference(f->channel);
+ if (prev && (prev == chan || fctx->sync(f, prev, chan) == 0))
+ must_wait = false;
+ rcu_read_unlock();
+ }
- if (!prev || (prev != chan && (ret = fctx->sync(f, prev, chan))))
+ if (must_wait)
ret = fence_wait(fence, intr);
return ret;
for (i = 0; i < fobj->shared_count && !ret; ++i) {
struct nouveau_channel *prev = NULL;
+ bool must_wait = true;
fence = rcu_dereference_protected(fobj->shared[i],
reservation_object_held(resv));
f = nouveau_local_fence(fence, chan->drm);
- if (f)
- prev = f->channel;
+ if (f) {
+ rcu_read_lock();
+ prev = rcu_dereference(f->channel);
+ if (prev && (prev == chan || fctx->sync(f, prev, chan) == 0))
+ must_wait = false;
+ rcu_read_unlock();
+ }
- if (!prev || (prev != chan && (ret = fctx->sync(f, prev, chan))))
+ if (must_wait)
ret = fence_wait(fence, intr);
-
- if (ret)
- break;
}
return ret;
struct nouveau_fence *fence = from_fence(f);
struct nouveau_fence_chan *fctx = nouveau_fctx(fence);
- return fence->channel ? fctx->name : "dead channel";
+ return !fctx->dead ? fctx->name : "dead channel";
}
/*
{
struct nouveau_fence *fence = from_fence(f);
struct nouveau_fence_chan *fctx = nouveau_fctx(fence);
- struct nouveau_channel *chan = fence->channel;
+ struct nouveau_channel *chan;
+ bool ret = false;
+
+ rcu_read_lock();
+ chan = rcu_dereference(fence->channel);
+ if (chan)
+ ret = (int)(fctx->read(chan) - fence->base.seqno) >= 0;
+ rcu_read_unlock();
- return (int)(fctx->read(chan) - fence->base.seqno) >= 0;
+ return ret;
}
static bool nouveau_fence_no_signaling(struct fence *f)
bool sysmem;
- struct nouveau_channel *channel;
+ struct nouveau_channel __rcu *channel;
unsigned long timeout;
};
char name[32];
struct nvif_notify notify;
- int notify_ref;
+ int notify_ref, dead;
};
struct nouveau_fence_priv {
return 0;
}
+static int
+nv50_crtc_set_raster_vblank_dmi(struct nouveau_crtc *nv_crtc, u32 usec)
+{
+ struct nv50_mast *mast = nv50_mast(nv_crtc->base.dev);
+ u32 *push;
+
+ push = evo_wait(mast, 8);
+ if (!push)
+ return -ENOMEM;
+
+ evo_mthd(push, 0x0828 + (nv_crtc->index * 0x400), 1);
+ evo_data(push, usec);
+ evo_kick(push, mast);
+ return 0;
+}
+
static int
nv50_crtc_set_color_vibrance(struct nouveau_crtc *nv_crtc, bool update)
{
evo_mthd(push, 0x0804 + (nv_crtc->index * 0x400), 2);
evo_data(push, 0x00800000 | mode->clock);
evo_data(push, (ilace == 2) ? 2 : 0);
- evo_mthd(push, 0x0810 + (nv_crtc->index * 0x400), 8);
+ evo_mthd(push, 0x0810 + (nv_crtc->index * 0x400), 6);
evo_data(push, 0x00000000);
evo_data(push, (vactive << 16) | hactive);
evo_data(push, ( vsynce << 16) | hsynce);
evo_data(push, (vblanke << 16) | hblanke);
evo_data(push, (vblanks << 16) | hblanks);
evo_data(push, (vblan2e << 16) | vblan2s);
- evo_data(push, vblankus);
+ evo_mthd(push, 0x082c + (nv_crtc->index * 0x400), 1);
evo_data(push, 0x00000000);
evo_mthd(push, 0x0900 + (nv_crtc->index * 0x400), 2);
evo_data(push, 0x00000311);
nv_connector = nouveau_crtc_connector_get(nv_crtc);
nv50_crtc_set_dither(nv_crtc, false);
nv50_crtc_set_scale(nv_crtc, false);
+
+ /* G94 only accepts this after setting scale */
+ if (nv50_vers(mast) < GF110_DISP_CORE_CHANNEL_DMA)
+ nv50_crtc_set_raster_vblank_dmi(nv_crtc, vblankus);
+
nv50_crtc_set_color_vibrance(nv_crtc, false);
nv50_crtc_set_image(nv_crtc, crtc->primary->fb, x, y, false);
return 0;
struct qxl_framebuffer *qfb;
struct qxl_bo *bo, *old_bo = NULL;
struct qxl_crtc *qcrtc = to_qxl_crtc(crtc);
- uint32_t width, height, base_offset;
bool recreate_primary = false;
int ret;
int surf_id;
if (qcrtc->index == 0)
recreate_primary = true;
- width = mode->hdisplay;
- height = mode->vdisplay;
- base_offset = 0;
+ if (bo->surf.stride * bo->surf.height > qdev->vram_size) {
+ DRM_ERROR("Mode doesn't fit in vram size (vgamem)");
+ return -EINVAL;
+ }
ret = qxl_bo_reserve(bo, false);
if (ret != 0)
if (recreate_primary) {
qxl_io_destroy_primary(qdev);
qxl_io_log(qdev,
- "recreate primary: %dx%d (was %dx%d,%d,%d)\n",
- width, height, bo->surf.width,
- bo->surf.height, bo->surf.stride, bo->surf.format);
- qxl_io_create_primary(qdev, base_offset, bo);
+ "recreate primary: %dx%d,%d,%d\n",
+ bo->surf.width, bo->surf.height,
+ bo->surf.stride, bo->surf.format);
+ qxl_io_create_primary(qdev, 0, bo);
bo->is_primary = true;
}
return ret;
}
-int atom_execute_table(struct atom_context *ctx, int index, uint32_t * params)
+int atom_execute_table_scratch_unlocked(struct atom_context *ctx, int index, uint32_t * params)
{
int r;
return r;
}
+int atom_execute_table(struct atom_context *ctx, int index, uint32_t * params)
+{
+ int r;
+ mutex_lock(&ctx->scratch_mutex);
+ r = atom_execute_table_scratch_unlocked(ctx, index, params);
+ mutex_unlock(&ctx->scratch_mutex);
+ return r;
+}
+
static int atom_iio_len[] = { 1, 2, 3, 3, 3, 3, 4, 4, 4, 3 };
static void atom_index_iio(struct atom_context *ctx, int base)
struct atom_context {
struct card_info *card;
struct mutex mutex;
+ struct mutex scratch_mutex;
void *bios;
uint32_t cmd_table, data_table;
uint16_t *iio;
struct atom_context *atom_parse(struct card_info *, void *);
int atom_execute_table(struct atom_context *, int, uint32_t *);
+int atom_execute_table_scratch_unlocked(struct atom_context *, int, uint32_t *);
int atom_asic_init(struct atom_context *);
void atom_destroy(struct atom_context *);
bool atom_parse_data_header(struct atom_context *ctx, int index, uint16_t *size,
memset(&args, 0, sizeof(args));
mutex_lock(&chan->mutex);
+ mutex_lock(&rdev->mode_info.atom_context->scratch_mutex);
base = (unsigned char *)(rdev->mode_info.atom_context->scratch + 1);
if (ASIC_IS_DCE4(rdev))
args.v2.ucHPD_ID = chan->rec.hpd;
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ atom_execute_table_scratch_unlocked(rdev->mode_info.atom_context, index, (uint32_t *)&args);
*ack = args.v1.ucReplyStatus;
r = recv_bytes;
done:
+ mutex_unlock(&rdev->mode_info.atom_context->scratch_mutex);
mutex_unlock(&chan->mutex);
return r;
memset(&args, 0, sizeof(args));
mutex_lock(&chan->mutex);
+ mutex_lock(&rdev->mode_info.atom_context->scratch_mutex);
base = (unsigned char *)rdev->mode_info.atom_context->scratch;
args.ucSlaveAddr = slave_addr << 1;
args.ucLineNumber = chan->rec.i2c_id;
- atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+ atom_execute_table_scratch_unlocked(rdev->mode_info.atom_context, index, (uint32_t *)&args);
/* error */
if (args.ucStatus != HW_ASSISTED_I2C_STATUS_SUCCESS) {
radeon_atom_copy_swap(buf, base, num, false);
done:
+ mutex_unlock(&rdev->mode_info.atom_context->scratch_mutex);
mutex_unlock(&chan->mutex);
return r;
#include "drmP.h"
#include "radeon.h"
+#include "radeon_asic.h"
#include "btcd.h"
#include "r600_dpm.h"
#include "cypress_dpm.h"
{ 25000, 30000, RADEON_SCLK_UP }
};
+void btc_get_max_clock_from_voltage_dependency_table(struct radeon_clock_voltage_dependency_table *table,
+ u32 *max_clock)
+{
+ u32 i, clock = 0;
+
+ if ((table == NULL) || (table->count == 0)) {
+ *max_clock = clock;
+ return;
+ }
+
+ for (i = 0; i < table->count; i++) {
+ if (clock < table->entries[i].clk)
+ clock = table->entries[i].clk;
+ }
+ *max_clock = clock;
+}
+
void btc_apply_voltage_dependency_rules(struct radeon_clock_voltage_dependency_table *table,
u32 clock, u16 max_voltage, u16 *voltage)
{
struct rv7xx_pl *pl);
void btc_apply_voltage_dependency_rules(struct radeon_clock_voltage_dependency_table *table,
u32 clock, u16 max_voltage, u16 *voltage);
+void btc_get_max_clock_from_voltage_dependency_table(struct radeon_clock_voltage_dependency_table *table,
+ u32 *max_clock);
void btc_apply_voltage_delta_rules(struct radeon_device *rdev,
u16 max_vddc, u16 max_vddci,
u16 *vddc, u16 *vddci);
#include <linux/firmware.h>
#include "drmP.h"
#include "radeon.h"
+#include "radeon_asic.h"
#include "radeon_ucode.h"
#include "cikd.h"
#include "r600_dpm.h"
/* init the CE partitions. CE only used for gfx on CIK */
radeon_ring_write(ring, PACKET3(PACKET3_SET_BASE, 2));
radeon_ring_write(ring, PACKET3_BASE_INDEX(CE_PARTITION_BASE));
- radeon_ring_write(ring, 0xc000);
- radeon_ring_write(ring, 0xc000);
+ radeon_ring_write(ring, 0x8000);
+ radeon_ring_write(ring, 0x8000);
/* setup clear context state */
radeon_ring_write(ring, PACKET3(PACKET3_PREAMBLE_CNTL, 0));
u32 num_heads = 0, lb_size;
int i;
+ if (!rdev->mode_info.mode_config_initialized)
+ return;
+
radeon_update_display_priority(rdev);
for (i = 0; i < rdev->num_crtc; i++) {
{
unsigned i;
int r;
- void __iomem *ptr = (void *)rdev->vram_scratch.ptr;
+ unsigned index;
u32 tmp;
+ u64 gpu_addr;
- if (!ptr) {
- DRM_ERROR("invalid vram scratch pointer\n");
- return -EINVAL;
- }
+ if (ring->idx == R600_RING_TYPE_DMA_INDEX)
+ index = R600_WB_DMA_RING_TEST_OFFSET;
+ else
+ index = CAYMAN_WB_DMA1_RING_TEST_OFFSET;
+
+ gpu_addr = rdev->wb.gpu_addr + index;
tmp = 0xCAFEDEAD;
- writel(tmp, ptr);
+ rdev->wb.wb[index/4] = cpu_to_le32(tmp);
r = radeon_ring_lock(rdev, ring, 5);
if (r) {
return r;
}
radeon_ring_write(ring, SDMA_PACKET(SDMA_OPCODE_WRITE, SDMA_WRITE_SUB_OPCODE_LINEAR, 0));
- radeon_ring_write(ring, rdev->vram_scratch.gpu_addr & 0xfffffffc);
- radeon_ring_write(ring, upper_32_bits(rdev->vram_scratch.gpu_addr));
+ radeon_ring_write(ring, lower_32_bits(gpu_addr));
+ radeon_ring_write(ring, upper_32_bits(gpu_addr));
radeon_ring_write(ring, 1); /* number of DWs to follow */
radeon_ring_write(ring, 0xDEADBEEF);
radeon_ring_unlock_commit(rdev, ring, false);
for (i = 0; i < rdev->usec_timeout; i++) {
- tmp = readl(ptr);
+ tmp = le32_to_cpu(rdev->wb.wb[index/4]);
if (tmp == 0xDEADBEEF)
break;
DRM_UDELAY(1);
{
struct radeon_ib ib;
unsigned i;
+ unsigned index;
int r;
- void __iomem *ptr = (void *)rdev->vram_scratch.ptr;
u32 tmp = 0;
+ u64 gpu_addr;
- if (!ptr) {
- DRM_ERROR("invalid vram scratch pointer\n");
- return -EINVAL;
- }
+ if (ring->idx == R600_RING_TYPE_DMA_INDEX)
+ index = R600_WB_DMA_RING_TEST_OFFSET;
+ else
+ index = CAYMAN_WB_DMA1_RING_TEST_OFFSET;
+
+ gpu_addr = rdev->wb.gpu_addr + index;
tmp = 0xCAFEDEAD;
- writel(tmp, ptr);
+ rdev->wb.wb[index/4] = cpu_to_le32(tmp);
r = radeon_ib_get(rdev, ring->idx, &ib, NULL, 256);
if (r) {
}
ib.ptr[0] = SDMA_PACKET(SDMA_OPCODE_WRITE, SDMA_WRITE_SUB_OPCODE_LINEAR, 0);
- ib.ptr[1] = rdev->vram_scratch.gpu_addr & 0xfffffffc;
- ib.ptr[2] = upper_32_bits(rdev->vram_scratch.gpu_addr);
+ ib.ptr[1] = lower_32_bits(gpu_addr);
+ ib.ptr[2] = upper_32_bits(gpu_addr);
ib.ptr[3] = 1;
ib.ptr[4] = 0xDEADBEEF;
ib.length_dw = 5;
return r;
}
for (i = 0; i < rdev->usec_timeout; i++) {
- tmp = readl(ptr);
+ tmp = le32_to_cpu(rdev->wb.wb[index/4]);
if (tmp == 0xDEADBEEF)
break;
DRM_UDELAY(1);
#include "drmP.h"
#include "radeon.h"
+#include "radeon_asic.h"
#include "evergreend.h"
#include "r600_dpm.h"
#include "cypress_dpm.h"
struct drm_connector *connector;
struct radeon_connector *radeon_connector = NULL;
u32 tmp;
- u8 *sadb;
+ u8 *sadb = NULL;
int sad_count;
list_for_each_entry(connector, &encoder->dev->mode_config.connector_list, head) {
sad_count = drm_edid_to_speaker_allocation(radeon_connector->edid, &sadb);
if (sad_count < 0) {
- DRM_ERROR("Couldn't read Speaker Allocation Data Block: %d\n", sad_count);
- return;
+ DRM_DEBUG("Couldn't read Speaker Allocation Data Block: %d\n", sad_count);
+ sad_count = 0;
}
/* program the speaker allocation */
struct drm_connector *connector;
struct radeon_connector *radeon_connector = NULL;
u32 offset, tmp;
- u8 *sadb;
+ u8 *sadb = NULL;
int sad_count;
if (!dig || !dig->afmt || !dig->afmt->pin)
}
sad_count = drm_edid_to_speaker_allocation(radeon_connector_edid(connector), &sadb);
- if (sad_count <= 0) {
- DRM_ERROR("Couldn't read Speaker Allocation Data Block: %d\n", sad_count);
- return;
+ if (sad_count < 0) {
+ DRM_DEBUG("Couldn't read Speaker Allocation Data Block: %d\n", sad_count);
+ sad_count = 0;
}
/* program the speaker allocation */
u32 num_heads = 0, lb_size;
int i;
+ if (!rdev->mode_info.mode_config_initialized)
+ return;
+
radeon_update_display_priority(rdev);
for (i = 0; i < rdev->num_crtc; i++) {
WREG32(EVERGREEN_CRTC_UPDATE_LOCK + crtc_offsets[i], 1);
tmp |= EVERGREEN_CRTC_BLANK_DATA_EN;
WREG32(EVERGREEN_CRTC_BLANK_CONTROL + crtc_offsets[i], tmp);
+ WREG32(EVERGREEN_CRTC_UPDATE_LOCK + crtc_offsets[i], 0);
}
} else {
tmp = RREG32(EVERGREEN_CRTC_CONTROL + crtc_offsets[i]);
u32 vgt_cache_invalidation;
u32 hdp_host_path_cntl, tmp;
u32 disabled_rb_mask;
- int i, j, num_shader_engines, ps_thread_count;
+ int i, j, ps_thread_count;
switch (rdev->family) {
case CHIP_CYPRESS:
rdev->config.evergreen.tile_config |=
((gb_addr_config & 0x30000000) >> 28) << 12;
- num_shader_engines = (gb_addr_config & NUM_SHADER_ENGINES(3) >> 12) + 1;
-
if ((rdev->family >= CHIP_CEDAR) && (rdev->family <= CHIP_HEMLOCK)) {
u32 efuse_straps_4;
u32 efuse_straps_3;
struct drm_connector *connector;
struct radeon_connector *radeon_connector = NULL;
u32 tmp;
- u8 *sadb;
+ u8 *sadb = NULL;
int sad_count;
list_for_each_entry(connector, &encoder->dev->mode_config.connector_list, head) {
}
sad_count = drm_edid_to_speaker_allocation(radeon_connector_edid(connector), &sadb);
- if (sad_count <= 0) {
- DRM_ERROR("Couldn't read Speaker Allocation Data Block: %d\n", sad_count);
- return;
+ if (sad_count < 0) {
+ DRM_DEBUG("Couldn't read Speaker Allocation Data Block: %d\n", sad_count);
+ sad_count = 0;
}
/* program the speaker allocation */
pi->sram_end = SMC_RAM_END;
- pi->enable_nb_dpm = true;
+ /* Enabling nb dpm on an asrock system prevents dpm from working */
+ if (rdev->pdev->subsystem_vendor == 0x1849)
+ pi->enable_nb_dpm = false;
+ else
+ pi->enable_nb_dpm = true;
pi->caps_power_containment = true;
pi->caps_cac = true;
pi->caps_sclk_ds = true;
pi->enable_auto_thermal_throttling = true;
pi->disable_nb_ps3_in_battery = false;
- if (radeon_bapm == 0)
+ if (radeon_bapm == -1) {
+ /* There are stability issues reported on with
+ * bapm enabled on an asrock system.
+ */
+ if (rdev->pdev->subsystem_vendor == 0x1849)
+ pi->bapm_enable = false;
+ else
+ pi->bapm_enable = true;
+ } else if (radeon_bapm == 0) {
pi->bapm_enable = false;
- else
+ } else {
pi->bapm_enable = true;
+ }
pi->voltage_drop_t = 0;
pi->caps_sclk_throttle_low_notification = false;
pi->caps_fps = false; /* true? */
#include "drmP.h"
#include "radeon.h"
+#include "radeon_asic.h"
#include "nid.h"
#include "r600_dpm.h"
#include "ni_dpm.h"
uint32_t pixel_bytes1 = 0;
uint32_t pixel_bytes2 = 0;
+ if (!rdev->mode_info.mode_config_initialized)
+ return;
+
radeon_update_display_priority(rdev);
if (rdev->mode_info.crtcs[0]->base.enabled) {
{
unsigned i;
int r;
- void __iomem *ptr = (void *)rdev->vram_scratch.ptr;
+ unsigned index;
u32 tmp;
+ u64 gpu_addr;
- if (!ptr) {
- DRM_ERROR("invalid vram scratch pointer\n");
- return -EINVAL;
- }
+ if (ring->idx == R600_RING_TYPE_DMA_INDEX)
+ index = R600_WB_DMA_RING_TEST_OFFSET;
+ else
+ index = CAYMAN_WB_DMA1_RING_TEST_OFFSET;
+
+ gpu_addr = rdev->wb.gpu_addr + index;
tmp = 0xCAFEDEAD;
- writel(tmp, ptr);
+ rdev->wb.wb[index/4] = cpu_to_le32(tmp);
r = radeon_ring_lock(rdev, ring, 4);
if (r) {
return r;
}
radeon_ring_write(ring, DMA_PACKET(DMA_PACKET_WRITE, 0, 0, 1));
- radeon_ring_write(ring, rdev->vram_scratch.gpu_addr & 0xfffffffc);
- radeon_ring_write(ring, upper_32_bits(rdev->vram_scratch.gpu_addr) & 0xff);
+ radeon_ring_write(ring, lower_32_bits(gpu_addr));
+ radeon_ring_write(ring, upper_32_bits(gpu_addr) & 0xff);
radeon_ring_write(ring, 0xDEADBEEF);
radeon_ring_unlock_commit(rdev, ring, false);
for (i = 0; i < rdev->usec_timeout; i++) {
- tmp = readl(ptr);
+ tmp = le32_to_cpu(rdev->wb.wb[index/4]);
if (tmp == 0xDEADBEEF)
break;
DRM_UDELAY(1);
{
struct radeon_ib ib;
unsigned i;
+ unsigned index;
int r;
- void __iomem *ptr = (void *)rdev->vram_scratch.ptr;
u32 tmp = 0;
+ u64 gpu_addr;
- if (!ptr) {
- DRM_ERROR("invalid vram scratch pointer\n");
- return -EINVAL;
- }
+ if (ring->idx == R600_RING_TYPE_DMA_INDEX)
+ index = R600_WB_DMA_RING_TEST_OFFSET;
+ else
+ index = CAYMAN_WB_DMA1_RING_TEST_OFFSET;
- tmp = 0xCAFEDEAD;
- writel(tmp, ptr);
+ gpu_addr = rdev->wb.gpu_addr + index;
r = radeon_ib_get(rdev, ring->idx, &ib, NULL, 256);
if (r) {
}
ib.ptr[0] = DMA_PACKET(DMA_PACKET_WRITE, 0, 0, 1);
- ib.ptr[1] = rdev->vram_scratch.gpu_addr & 0xfffffffc;
- ib.ptr[2] = upper_32_bits(rdev->vram_scratch.gpu_addr) & 0xff;
+ ib.ptr[1] = lower_32_bits(gpu_addr);
+ ib.ptr[2] = upper_32_bits(gpu_addr) & 0xff;
ib.ptr[3] = 0xDEADBEEF;
ib.length_dw = 4;
return r;
}
for (i = 0; i < rdev->usec_timeout; i++) {
- tmp = readl(ptr);
+ tmp = le32_to_cpu(rdev->wb.wb[index/4]);
if (tmp == 0xDEADBEEF)
break;
DRM_UDELAY(1);
#include "drmP.h"
#include "radeon.h"
+#include "radeon_asic.h"
#include "r600d.h"
#include "r600_dpm.h"
#include "atom.h"
(mode_info->atom_context->bios + data_offset +
le16_to_cpu(ext_hdr->usPowerTuneTableOffset));
rdev->pm.dpm.dyn_state.cac_tdp_table->maximum_power_delivery_limit =
- ppt->usMaximumPowerDeliveryLimit;
+ le16_to_cpu(ppt->usMaximumPowerDeliveryLimit);
pt = &ppt->power_tune_table;
} else {
ATOM_PPLIB_POWERTUNE_Table *ppt = (ATOM_PPLIB_POWERTUNE_Table *)
#define R600_WB_EVENT_OFFSET 3072
#define CIK_WB_CP1_WPTR_OFFSET 3328
#define CIK_WB_CP2_WPTR_OFFSET 3584
+#define R600_WB_DMA_RING_TEST_OFFSET 3588
+#define CAYMAN_WB_DMA1_RING_TEST_OFFSET 3592
/**
* struct radeon_pm - power management datas
r = igp_read_bios_from_vram(rdev);
if (r == false)
r = radeon_read_bios(rdev);
- if (r == false) {
+ if (r == false)
r = radeon_read_disabled_bios(rdev);
- }
- if (r == false) {
+ if (r == false)
r = radeon_read_platform_bios(rdev);
- }
if (r == false || rdev->bios == NULL) {
DRM_ERROR("Unable to locate a BIOS ROM\n");
rdev->bios = NULL;
}
if (!radeon_connector->edid) {
+ /* don't fetch the edid from the vbios if ddc fails and runpm is
+ * enabled so we report disconnected.
+ */
+ if ((rdev->flags & RADEON_IS_PX) && (radeon_runtime_pm != 0))
+ return;
+
if (rdev->is_atom_bios) {
/* some laptops provide a hardcoded edid in rom for LCDs */
if (((connector->connector_type == DRM_MODE_CONNECTOR_LVDS) ||
static enum drm_connector_status
radeon_lvds_detect(struct drm_connector *connector, bool force)
{
+ struct drm_device *dev = connector->dev;
+ struct radeon_device *rdev = dev->dev_private;
struct radeon_connector *radeon_connector = to_radeon_connector(connector);
struct drm_encoder *encoder = radeon_best_single_encoder(connector);
enum drm_connector_status ret = connector_status_disconnected;
/* check if panel is valid */
if (native_mode->hdisplay >= 320 && native_mode->vdisplay >= 240)
ret = connector_status_connected;
-
+ /* don't fetch the edid from the vbios if ddc fails and runpm is
+ * enabled so we report disconnected.
+ */
+ if ((rdev->flags & RADEON_IS_PX) && (radeon_runtime_pm != 0))
+ ret = connector_status_disconnected;
}
/* check for edid as well */
/* check if panel is valid */
if (native_mode->hdisplay >= 320 && native_mode->vdisplay >= 240)
ret = connector_status_connected;
+ /* don't fetch the edid from the vbios if ddc fails and runpm is
+ * enabled so we report disconnected.
+ */
+ if ((rdev->flags & RADEON_IS_PX) && (radeon_runtime_pm != 0))
+ ret = connector_status_disconnected;
}
/* eDP is always DP */
radeon_dig_connector->dp_sink_type = CONNECTOR_OBJECT_ID_DISPLAYPORT;
static int radeon_cs_sync_rings(struct radeon_cs_parser *p)
{
- int i, r = 0;
+ struct radeon_cs_reloc *reloc;
+ int r;
- for (i = 0; i < p->nrelocs; i++) {
+ list_for_each_entry(reloc, &p->validated, tv.head) {
struct reservation_object *resv;
- if (!p->relocs[i].robj)
- continue;
-
- resv = p->relocs[i].robj->tbo.resv;
+ resv = reloc->robj->tbo.resv;
r = radeon_semaphore_sync_resv(p->rdev, p->ib.semaphore, resv,
- p->relocs[i].tv.shared);
-
+ reloc->tv.shared);
if (r)
- break;
+ return r;
}
- return r;
+ return 0;
}
/* XXX: note that this is called from the legacy UMS CS ioctl as well */
kfree(parser->track);
kfree(parser->relocs);
kfree(parser->relocs_ptr);
- kfree(parser->vm_bos);
+ drm_free_large(parser->vm_bos);
for (i = 0; i < parser->nchunks; i++)
drm_free_large(parser->chunks[i].kdata);
kfree(parser->chunks);
}
mutex_init(&rdev->mode_info.atom_context->mutex);
+ mutex_init(&rdev->mode_info.atom_context->scratch_mutex);
radeon_atom_initialize_bios_scratch_regs(rdev->ddev);
atom_allocate_fb_scratch(rdev->mode_info.atom_context);
return 0;
if (radeon_vm_block_size == -1) {
/* Total bits covered by PD + PTs */
- unsigned bits = ilog2(radeon_vm_size) + 17;
+ unsigned bits = ilog2(radeon_vm_size) + 18;
/* Make sure the PD is 4K in size up to 8GB address space.
Above that split equal between PD and PTs */
(rdev->pdev->subsystem_vendor == 0x1734) &&
(rdev->pdev->subsystem_device == 0x1107))
use_bl = false;
+ /* disable native backlight control on older asics */
+ else if (rdev->family < CHIP_R600)
+ use_bl = false;
else
use_bl = true;
}
if (rdev->flags & RADEON_IS_AGP)
return false;
+ /*
+ * Older chips have a HW limitation, they can only generate 40 bits
+ * of address for "64-bit" MSIs which breaks on some platforms, notably
+ * IBM POWER servers, so we limit them
+ */
+ if (rdev->family < CHIP_BONAIRE) {
+ dev_info(rdev->dev, "radeon: MSI limited to 32-bit\n");
+ rdev->pdev->no_64bit_msi = 1;
+ }
+
/* force MSI on */
if (radeon_msi == 1)
return true;
/* Get associated drm_crtc: */
drmcrtc = &rdev->mode_info.crtcs[crtc]->base;
+ if (!drmcrtc)
+ return -EINVAL;
/* Helper routine in DRM core does all the work: */
return drm_calc_vbltimestamp_from_scanoutpos(dev, crtc, max_error,
if (!(rdev->flags & RADEON_IS_PCIE))
bo->flags &= ~(RADEON_GEM_GTT_WC | RADEON_GEM_GTT_UC);
+#ifdef CONFIG_X86_32
+ /* XXX: Write-combined CPU mappings of GTT seem broken on 32-bit
+ * See https://bugs.freedesktop.org/show_bug.cgi?id=84627
+ */
+ bo->flags &= ~RADEON_GEM_GTT_WC;
+#endif
+
radeon_ttm_placement_from_domain(bo, domain);
/* Kernel allocation are uninterruptible */
down_read(&rdev->pm.mclk_lock);
}
/* and then save the content of the ring */
- *data = kmalloc_array(size, sizeof(uint32_t), GFP_KERNEL);
+ *data = drm_malloc_ab(size, sizeof(uint32_t));
if (!*data) {
mutex_unlock(&rdev->ring_lock);
return 0;
}
radeon_ring_unlock_commit(rdev, ring, false);
- kfree(data);
+ drm_free_large(data);
return 0;
}
struct radeon_cs_reloc *list;
unsigned i, idx;
- list = kmalloc_array(vm->max_pde_used + 2,
- sizeof(struct radeon_cs_reloc), GFP_KERNEL);
+ list = drm_malloc_ab(vm->max_pde_used + 2,
+ sizeof(struct radeon_cs_reloc));
if (!list)
return NULL;
u32 d1mode_priority_a_cnt, d2mode_priority_a_cnt;
/* FIXME: implement full support */
+ if (!rdev->mode_info.mode_config_initialized)
+ return;
+
radeon_update_display_priority(rdev);
if (rdev->mode_info.crtcs[0]->base.enabled)
u32 d1mode_priority_a_cnt, d1mode_priority_b_cnt;
u32 d2mode_priority_a_cnt, d2mode_priority_b_cnt;
+ if (!rdev->mode_info.mode_config_initialized)
+ return;
+
radeon_update_display_priority(rdev);
if (rdev->mode_info.crtcs[0]->base.enabled)
#include "drmP.h"
#include "radeon.h"
+#include "radeon_asic.h"
#include "rs780d.h"
#include "r600_dpm.h"
#include "rs780_dpm.h"
struct drm_display_mode *mode0 = NULL;
struct drm_display_mode *mode1 = NULL;
+ if (!rdev->mode_info.mode_config_initialized)
+ return;
+
radeon_update_display_priority(rdev);
if (rdev->mode_info.crtcs[0]->base.enabled)
#include "drmP.h"
#include "radeon.h"
+#include "radeon_asic.h"
#include "rv6xxd.h"
#include "r600_dpm.h"
#include "rv6xx_dpm.h"
#include "drmP.h"
#include "radeon.h"
+#include "radeon_asic.h"
#include "rv770d.h"
#include "r600_dpm.h"
#include "rv770_dpm.h"
u32 num_heads = 0, lb_size;
int i;
+ if (!rdev->mode_info.mode_config_initialized)
+ return;
+
radeon_update_display_priority(rdev);
for (i = 0; i < rdev->num_crtc; i++) {
#include "drmP.h"
#include "radeon.h"
+#include "radeon_asic.h"
#include "sid.h"
#include "r600_dpm.h"
#include "si_dpm.h"
bool disable_sclk_switching = false;
u32 mclk, sclk;
u16 vddc, vddci;
+ u32 max_sclk_vddc, max_mclk_vddci, max_mclk_vddc;
int i;
if ((rdev->pm.dpm.new_active_crtc_count > 1) ||
}
}
+ /* limit clocks to max supported clocks based on voltage dependency tables */
+ btc_get_max_clock_from_voltage_dependency_table(&rdev->pm.dpm.dyn_state.vddc_dependency_on_sclk,
+ &max_sclk_vddc);
+ btc_get_max_clock_from_voltage_dependency_table(&rdev->pm.dpm.dyn_state.vddci_dependency_on_mclk,
+ &max_mclk_vddci);
+ btc_get_max_clock_from_voltage_dependency_table(&rdev->pm.dpm.dyn_state.vddc_dependency_on_mclk,
+ &max_mclk_vddc);
+
+ for (i = 0; i < ps->performance_level_count; i++) {
+ if (max_sclk_vddc) {
+ if (ps->performance_levels[i].sclk > max_sclk_vddc)
+ ps->performance_levels[i].sclk = max_sclk_vddc;
+ }
+ if (max_mclk_vddci) {
+ if (ps->performance_levels[i].mclk > max_mclk_vddci)
+ ps->performance_levels[i].mclk = max_mclk_vddci;
+ }
+ if (max_mclk_vddc) {
+ if (ps->performance_levels[i].mclk > max_mclk_vddc)
+ ps->performance_levels[i].mclk = max_mclk_vddc;
+ }
+ }
+
/* XXX validate the min clocks required for display */
if (disable_mclk_switching) {
if ((rps->class2 & ATOM_PPLIB_CLASSIFICATION2_ULV) &&
index == 0) {
/* XXX disable for A0 tahiti */
- si_pi->ulv.supported = true;
+ si_pi->ulv.supported = false;
si_pi->ulv.pl = *pl;
si_pi->ulv.one_pcie_lane_in_ulv = false;
si_pi->ulv.volt_change_delay = SISLANDS_ULVVOLTAGECHANGEDELAY_DFLT;
#include "drmP.h"
#include "radeon.h"
+#include "radeon_asic.h"
#include "sumod.h"
#include "r600_dpm.h"
#include "cypress_dpm.h"
#include "drmP.h"
#include "radeon.h"
+#include "radeon_asic.h"
#include "trinityd.h"
#include "r600_dpm.h"
#include "trinity_dpm.h"
static void tegra_crtc_disable(struct drm_crtc *crtc)
{
- struct tegra_dc *dc = to_tegra_dc(crtc);
struct drm_device *drm = crtc->dev;
struct drm_plane *plane;
}
}
- drm_vblank_off(drm, dc->pipe);
+ drm_crtc_vblank_off(crtc);
}
static bool tegra_crtc_mode_fixup(struct drm_crtc *crtc,
u32 value;
int err;
- drm_vblank_pre_modeset(crtc->dev, dc->pipe);
-
err = tegra_crtc_setup_clk(crtc, mode);
if (err) {
dev_err(dc->dev, "failed to setup clock for CRTC: %d\n", err);
unsigned int syncpt;
unsigned long value;
+ drm_crtc_vblank_off(crtc);
+
/* hardware initialization */
reset_control_deassert(dc->rst);
usleep_range(10000, 20000);
value = GENERAL_ACT_REQ | WIN_A_ACT_REQ;
tegra_dc_writel(dc, value, DC_CMD_STATE_CONTROL);
- drm_vblank_post_modeset(crtc->dev, dc->pipe);
+ drm_crtc_vblank_on(crtc);
}
static void tegra_crtc_load_lut(struct drm_crtc *crtc)
static int ttm_mem_evict_first(struct ttm_bo_device *bdev,
uint32_t mem_type,
+ const struct ttm_place *place,
bool interruptible,
bool no_wait_gpu)
{
spin_lock(&glob->lru_lock);
list_for_each_entry(bo, &man->lru, lru) {
ret = __ttm_bo_reserve(bo, false, true, false, NULL);
- if (!ret)
+ if (!ret) {
+ if (place && (place->fpfn || place->lpfn)) {
+ /* Don't evict this BO if it's outside of the
+ * requested placement range
+ */
+ if (place->fpfn >= (bo->mem.start + bo->mem.size) ||
+ (place->lpfn && place->lpfn <= bo->mem.start)) {
+ __ttm_bo_unreserve(bo);
+ ret = -EBUSY;
+ continue;
+ }
+ }
+
break;
+ }
}
if (ret) {
return ret;
if (mem->mm_node)
break;
- ret = ttm_mem_evict_first(bdev, mem_type,
+ ret = ttm_mem_evict_first(bdev, mem_type, place,
interruptible, no_wait_gpu);
if (unlikely(ret != 0))
return ret;
for (i = 0; i < placement->num_placement; i++) {
const struct ttm_place *heap = &placement->placement[i];
- if (mem->mm_node && heap->lpfn != 0 &&
+ if (mem->mm_node &&
(mem->start < heap->fpfn ||
- mem->start + mem->num_pages > heap->lpfn))
+ (heap->lpfn != 0 && (mem->start + mem->num_pages) > heap->lpfn)))
continue;
*new_flags = heap->flags;
for (i = 0; i < placement->num_busy_placement; i++) {
const struct ttm_place *heap = &placement->busy_placement[i];
- if (mem->mm_node && heap->lpfn != 0 &&
+ if (mem->mm_node &&
(mem->start < heap->fpfn ||
- mem->start + mem->num_pages > heap->lpfn))
+ (heap->lpfn != 0 && (mem->start + mem->num_pages) > heap->lpfn)))
continue;
*new_flags = heap->flags;
spin_lock(&glob->lru_lock);
while (!list_empty(&man->lru)) {
spin_unlock(&glob->lru_lock);
- ret = ttm_mem_evict_first(bdev, mem_type, false, false);
+ ret = ttm_mem_evict_first(bdev, mem_type, NULL, false, false);
if (ret) {
if (allow_errors) {
return ret;
struct drm_hash_item *hash;
int ret;
- ret = drm_ht_find_item(&man->resources, user_key, &hash);
+ ret = drm_ht_find_item(&man->resources, user_key | (res_type << 24),
+ &hash);
if (likely(ret != 0))
return -EINVAL;
goto out_err0;
}
- if (unlikely(dev_priv->prim_bb_mem < dev_priv->vram_size))
+ /*
+ * Limit back buffer size to VRAM size. Remove this once
+ * screen targets are implemented.
+ */
+ if (dev_priv->prim_bb_mem > dev_priv->vram_size)
dev_priv->prim_bb_mem = dev_priv->vram_size;
mutex_unlock(&dev_priv->hw_mutex);
* can do this since the caller in the drm core doesn't check anything
* which is protected by any looks.
*/
- drm_modeset_unlock(&crtc->mutex);
+ drm_modeset_unlock_crtc(crtc);
drm_modeset_lock_all(dev_priv->dev);
/* A lot of the code assumes this */
ret = 0;
out:
drm_modeset_unlock_all(dev_priv->dev);
- drm_modeset_lock(&crtc->mutex, NULL);
+ drm_modeset_lock_crtc(crtc);
return ret;
}
* can do this since the caller in the drm core doesn't check anything
* which is protected by any looks.
*/
- drm_modeset_unlock(&crtc->mutex);
+ drm_modeset_unlock_crtc(crtc);
drm_modeset_lock_all(dev_priv->dev);
vmw_cursor_update_position(dev_priv, shown,
du->cursor_y + du->hotspot_y);
drm_modeset_unlock_all(dev_priv->dev);
- drm_modeset_lock(&crtc->mutex, NULL);
+ drm_modeset_lock_crtc(crtc);
return 0;
}
DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_PVSYNC)
};
int i;
+ u32 assumed_bpp = 2;
+
+ /*
+ * If using screen objects, then assume 32-bpp because that's what the
+ * SVGA device is assuming
+ */
+ if (dev_priv->sou_priv)
+ assumed_bpp = 4;
/* Add preferred mode */
{
mode->vdisplay = du->pref_height;
vmw_guess_mode_timing(mode);
- if (vmw_kms_validate_mode_vram(dev_priv, mode->hdisplay * 2,
- mode->vdisplay)) {
+ if (vmw_kms_validate_mode_vram(dev_priv,
+ mode->hdisplay * assumed_bpp,
+ mode->vdisplay)) {
drm_mode_probed_add(connector, mode);
} else {
drm_mode_destroy(dev, mode);
bmode->vdisplay > max_height)
continue;
- if (!vmw_kms_validate_mode_vram(dev_priv, bmode->hdisplay * 2,
+ if (!vmw_kms_validate_mode_vram(dev_priv,
+ bmode->hdisplay * assumed_bpp,
bmode->vdisplay))
continue;
hdev->hiddev_disconnect(hdev);
if (hdev->claimed & HID_CLAIMED_HIDRAW)
hidraw_disconnect(hdev);
+ hdev->claimed = 0;
}
EXPORT_SYMBOL_GPL(hid_disconnect);
[KEY_BRIGHTNESS_MIN] = "BrightnessMin",
[KEY_BRIGHTNESS_MAX] = "BrightnessMax",
[KEY_BRIGHTNESS_AUTO] = "BrightnessAuto",
+ [KEY_KBDINPUTASSIST_PREV] = "KbdInputAssistPrev",
+ [KEY_KBDINPUTASSIST_NEXT] = "KbdInputAssistNext",
+ [KEY_KBDINPUTASSIST_PREVGROUP] = "KbdInputAssistPrevGroup",
+ [KEY_KBDINPUTASSIST_NEXTGROUP] = "KbdInputAssistNextGroup",
+ [KEY_KBDINPUTASSIST_ACCEPT] = "KbdInputAssistAccept",
+ [KEY_KBDINPUTASSIST_CANCEL] = "KbdInputAssistCancel",
};
static const char *relatives[REL_MAX + 1] = {
#define USB_VENDOR_ID_ELAN 0x04f3
#define USB_DEVICE_ID_ELAN_TOUCHSCREEN 0x0089
+#define USB_DEVICE_ID_ELAN_TOUCHSCREEN_009B 0x009b
+#define USB_DEVICE_ID_ELAN_TOUCHSCREEN_0103 0x0103
+#define USB_DEVICE_ID_ELAN_TOUCHSCREEN_016F 0x016f
#define USB_VENDOR_ID_ELECOM 0x056e
#define USB_DEVICE_ID_ELECOM_BM084 0x0061
break;
case 0x5b: /* TransducerSerialNumber */
- set_bit(MSC_SERIAL, input->mscbit);
+ usage->type = EV_MSC;
+ usage->code = MSC_SERIAL;
+ bit = input->mscbit;
+ max = MSC_MAX;
break;
default: goto unknown;
case 0x28b: map_key_clear(KEY_FORWARDMAIL); break;
case 0x28c: map_key_clear(KEY_SEND); break;
+ case 0x2c7: map_key_clear(KEY_KBDINPUTASSIST_PREV); break;
+ case 0x2c8: map_key_clear(KEY_KBDINPUTASSIST_NEXT); break;
+ case 0x2c9: map_key_clear(KEY_KBDINPUTASSIST_PREVGROUP); break;
+ case 0x2ca: map_key_clear(KEY_KBDINPUTASSIST_NEXTGROUP); break;
+ case 0x2cb: map_key_clear(KEY_KBDINPUTASSIST_ACCEPT); break;
+ case 0x2cc: map_key_clear(KEY_KBDINPUTASSIST_CANCEL); break;
+
default: goto ignore;
}
break;
ret = -ENOMEM;
goto err_stop_hw;
}
- sd->hid_sensor_hub_client_devs[
- sd->hid_sensor_client_cnt].id =
- PLATFORM_DEVID_AUTO;
sd->hid_sensor_hub_client_devs[
sd->hid_sensor_client_cnt].name = name;
sd->hid_sensor_hub_client_devs[
if (last_hsdev)
last_hsdev->end_collection_index = i;
- ret = mfd_add_devices(&hdev->dev, 0, sd->hid_sensor_hub_client_devs,
- sd->hid_sensor_client_cnt, NULL, 0, NULL);
+ ret = mfd_add_hotplug_devices(&hdev->dev,
+ sd->hid_sensor_hub_client_devs,
+ sd->hid_sensor_client_cnt);
if (ret < 0)
goto err_stop_hw;
{ USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_AXIS_295, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ELAN, USB_DEVICE_ID_ELAN_TOUCHSCREEN, HID_QUIRK_ALWAYS_POLL },
+ { USB_VENDOR_ID_ELAN, USB_DEVICE_ID_ELAN_TOUCHSCREEN_009B, HID_QUIRK_ALWAYS_POLL },
+ { USB_VENDOR_ID_ELAN, USB_DEVICE_ID_ELAN_TOUCHSCREEN_0103, HID_QUIRK_ALWAYS_POLL },
+ { USB_VENDOR_ID_ELAN, USB_DEVICE_ID_ELAN_TOUCHSCREEN_016F, HID_QUIRK_ALWAYS_POLL },
{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_FORMOSA, USB_DEVICE_ID_FORMOSA_IR_RECEIVER, HID_QUIRK_NO_INIT_REPORTS },
{ USB_VENDOR_ID_FREESCALE, USB_DEVICE_ID_FREESCALE_MX28, HID_QUIRK_NOGET },
will be called lm93.
config SENSORS_LM95234
- tristate "National Semiconductor LM95234"
+ tristate "National Semiconductor LM95234 and compatibles"
depends on I2C
help
- If you say yes here you get support for the LM95234 temperature
- sensor.
+ If you say yes here you get support for the LM95233 and LM95234
+ temperature sensor chips.
This driver can also be built as a module. If so, the module
will be called lm95234.
will be called lm95241.
config SENSORS_LM95245
- tristate "National Semiconductor LM95245 sensor chip"
+ tristate "National Semiconductor LM95245 and compatibles"
depends on I2C
help
- If you say yes here you get support for LM95245 sensor chip.
+ If you say yes here you get support for LM95235 and LM95245
+ temperature sensor chips.
This driver can also be built as a module. If so, the module
will be called lm95245.
help
If you say yes here you get support for the hardware monitoring
functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D,
- NCT6791D and compatible Super-I/O chips. This driver replaces the
- w83627ehf driver for NCT6775F and NCT6776F.
+ NCT6791D, NCT6792D and compatible Super-I/O chips. This driver
+ replaces the w83627ehf driver for NCT6775F and NCT6776F.
This driver can also be built as a module. If so, the module
will be called nct6775.
+config SENSORS_NCT7802
+ tristate "Nuvoton NCT7802Y"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ If you say yes here you get support for the Nuvoton NCT7802Y
+ hardware monitoring chip.
+
+ This driver can also be built as a module. If so, the module
+ will be called nct7802.
+
config SENSORS_PCF8591
tristate "Philips PCF8591 ADC/DAC"
depends on I2C
depends on I2C
help
If you say yes here you get support for Texas Instruments TMP401,
- TMP411, TMP431, and TMP432 temperature sensor chips.
+ TMP411, TMP431, TMP432 and TMP435 temperature sensor chips.
This driver can also be built as a module. If so, the module
will be called tmp401.
obj-$(CONFIG_SENSORS_MENF21BMC_HWMON) += menf21bmc_hwmon.o
obj-$(CONFIG_SENSORS_NCT6683) += nct6683.o
obj-$(CONFIG_SENSORS_NCT6775) += nct6775.o
+obj-$(CONFIG_SENSORS_NCT7802) += nct7802.o
obj-$(CONFIG_SENSORS_NTC_THERMISTOR) += ntc_thermistor.o
obj-$(CONFIG_SENSORS_PC87360) += pc87360.o
obj-$(CONFIG_SENSORS_PC87427) += pc87427.o
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_NB_F4) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_15H_M30H_NB_F4) },
{ PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_NB_F4) },
- { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F3) },
+ { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_16H_M30H_NB_F4) },
{}
};
MODULE_DEVICE_TABLE(pci, fam15h_power_id_table);
if (ret)
goto clock_dis;
- data->hwmon_dev = devm_hwmon_device_register_with_groups(dev,
- client->name,
- data,
- g762_groups);
+ data->hwmon_dev = hwmon_device_register_with_groups(dev, client->name,
+ data, g762_groups);
if (IS_ERR(data->hwmon_dev)) {
ret = PTR_ERR(data->hwmon_dev);
goto clock_dis;
{
struct gpio_fan_data *fan_data = dev_get_drvdata(dev);
struct gpio_fan_alarm *alarm = fan_data->alarm;
- int value = gpio_get_value(alarm->gpio);
+ int value = gpio_get_value_cansleep(alarm->gpio);
if (alarm->active_low)
value = !value;
int i;
for (i = 0; i < fan_data->num_ctrl; i++)
- gpio_set_value(fan_data->ctrl[i], (ctrl_val >> i) & 1);
+ gpio_set_value_cansleep(fan_data->ctrl[i], (ctrl_val >> i) & 1);
}
static int __get_fan_ctrl(struct gpio_fan_data *fan_data)
for (i = 0; i < fan_data->num_ctrl; i++) {
int value;
- value = gpio_get_value(fan_data->ctrl[i]);
+ value = gpio_get_value_cansleep(fan_data->ctrl[i]);
ctrl_val |= (value << i);
}
return ctrl_val;
if (err)
return err;
- err = gpio_direction_output(ctrl[i], gpio_get_value(ctrl[i]));
+ err = gpio_direction_output(ctrl[i],
+ gpio_get_value_cansleep(ctrl[i]));
if (err)
return err;
}
return 0;
}
+static void gpio_fan_shutdown(struct platform_device *pdev)
+{
+ struct gpio_fan_data *fan_data = dev_get_drvdata(&pdev->dev);
+
+ if (fan_data->ctrl)
+ set_fan_speed(fan_data, 0);
+}
+
#ifdef CONFIG_PM_SLEEP
static int gpio_fan_suspend(struct device *dev)
{
static struct platform_driver gpio_fan_driver = {
.probe = gpio_fan_probe,
+ .shutdown = gpio_fan_shutdown,
.driver = {
.name = "gpio-fan",
.pm = GPIO_FAN_PM,
u32 sensors_count; /* Total count of sensors from each group */
};
-/* Platform device representing all the ibmpowernv sensors */
-static struct platform_device *pdevice;
-
static ssize_t show_sensor(struct device *dev, struct device_attribute *devattr,
char *buf)
{
return sprintf(buf, "%u\n", x);
}
-static int __init get_sensor_index_attr(const char *name, u32 *index,
+static int get_sensor_index_attr(const char *name, u32 *index,
char *attr)
{
char *hash_pos = strchr(name, '#');
* which need to be mapped as fan2_input, temp1_max respectively before
* populating them inside hwmon device class.
*/
-static int __init create_hwmon_attr_name(struct device *dev, enum sensors type,
+static int create_hwmon_attr_name(struct device *dev, enum sensors type,
const char *node_name,
char *hwmon_attr_name)
{
return 0;
}
-static int __init populate_attr_groups(struct platform_device *pdev)
+static int populate_attr_groups(struct platform_device *pdev)
{
struct platform_data *pdata = platform_get_drvdata(pdev);
const struct attribute_group **pgroups = pdata->attr_groups;
enum sensors type;
opal = of_find_node_by_path("/ibm,opal/sensors");
- if (!opal) {
- dev_err(&pdev->dev, "Opal node 'sensors' not found\n");
- return -ENODEV;
- }
-
for_each_child_of_node(opal, np) {
if (np->name == NULL)
continue;
* to the name required by the higher 'hwmon' driver like fan1_input, temp1_max
* etc..
*/
-static int __init create_device_attrs(struct platform_device *pdev)
+static int create_device_attrs(struct platform_device *pdev)
{
struct platform_data *pdata = platform_get_drvdata(pdev);
const struct attribute_group **pgroups = pdata->attr_groups;
return err;
}
-static int __init ibmpowernv_probe(struct platform_device *pdev)
+static int ibmpowernv_probe(struct platform_device *pdev)
{
struct platform_data *pdata;
struct device *hwmon_dev;
return PTR_ERR_OR_ZERO(hwmon_dev);
}
-static struct platform_driver ibmpowernv_driver = {
- .driver = {
- .owner = THIS_MODULE,
- .name = DRVNAME,
+static const struct platform_device_id opal_sensor_driver_ids[] = {
+ {
+ .name = "opal-sensor",
},
+ { }
};
+MODULE_DEVICE_TABLE(platform, opal_sensor_driver_ids);
-static int __init ibmpowernv_init(void)
-{
- int err;
-
- pdevice = platform_device_alloc(DRVNAME, 0);
- if (!pdevice) {
- pr_err("Device allocation failed\n");
- err = -ENOMEM;
- goto exit;
- }
-
- err = platform_device_add(pdevice);
- if (err) {
- pr_err("Device addition failed (%d)\n", err);
- goto exit_device_put;
- }
-
- err = platform_driver_probe(&ibmpowernv_driver, ibmpowernv_probe);
- if (err) {
- pr_err("Platfrom driver probe failed\n");
- goto exit_device_del;
- }
-
- return 0;
-
-exit_device_del:
- platform_device_del(pdevice);
-exit_device_put:
- platform_device_put(pdevice);
-exit:
- return err;
-}
+static struct platform_driver ibmpowernv_driver = {
+ .probe = ibmpowernv_probe,
+ .id_table = opal_sensor_driver_ids,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRVNAME,
+ },
+};
-static void __exit ibmpowernv_exit(void)
-{
- platform_driver_unregister(&ibmpowernv_driver);
- platform_device_unregister(pdevice);
-}
+module_platform_driver(ibmpowernv_driver);
MODULE_AUTHOR("Neelesh Gupta <neelegup@linux.vnet.ibm.com>");
MODULE_DESCRIPTION("IBM POWERNV platform sensors");
MODULE_LICENSE("GPL");
-
-module_init(ibmpowernv_init);
-module_exit(ibmpowernv_exit);
struct iio_hwmon_state *st;
struct sensor_device_attribute *a;
int ret, i;
- int in_i = 1, temp_i = 1, curr_i = 1;
+ int in_i = 1, temp_i = 1, curr_i = 1, humidity_i = 1;
enum iio_chan_type type;
struct iio_channel *channels;
const char *name = "iio_hwmon";
"curr%d_input",
curr_i++);
break;
+ case IIO_HUMIDITYRELATIVE:
+ a->dev_attr.attr.name = kasprintf(GFP_KERNEL,
+ "humidity%d_input",
+ humidity_i++);
+ break;
default:
ret = -EINVAL;
goto error_release_channels;
struct device *hwmon_dev;
long shunt = 10000; /* default shunt value 10mOhms */
u32 val;
+ int ret;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA))
return -ENODEV;
data->config = &ina2xx_config[data->kind];
/* device configuration */
- i2c_smbus_write_word_swapped(client, INA2XX_CONFIG,
- data->config->config_default);
- /* set current LSB to 1mA, shunt is in uOhms */
- /* (equation 13 in datasheet) */
- i2c_smbus_write_word_swapped(client, INA2XX_CALIBRATION,
- data->config->calibration_factor / shunt);
+ ret = i2c_smbus_write_word_swapped(client, INA2XX_CONFIG,
+ data->config->config_default);
+ if (ret < 0) {
+ dev_err(dev,
+ "error writing to the config register: %d", ret);
+ return -ENODEV;
+ }
+
+ /*
+ * Set current LSB to 1mA, shunt is in uOhms
+ * (equation 13 in datasheet).
+ */
+ ret = i2c_smbus_write_word_swapped(client, INA2XX_CALIBRATION,
+ data->config->calibration_factor / shunt);
+ if (ret < 0) {
+ dev_err(dev,
+ "error writing to the calibration register: %d", ret);
+ return -ENODEV;
+ }
data->client = client;
mutex_init(&data->update_lock);
g751,
lm75,
lm75a,
+ lm75b,
max6625,
max6626,
mcp980x,
data->resolution = 9;
data->sample_time = HZ / 2;
break;
+ case lm75b:
+ data->resolution = 11;
+ data->sample_time = HZ / 4;
+ break;
case max6625:
data->resolution = 9;
data->sample_time = HZ / 4;
{ "g751", g751, },
{ "lm75", lm75, },
{ "lm75a", lm75a, },
+ { "lm75b", lm75b, },
{ "max6625", max6625, },
{ "max6626", max6626, },
{ "mcp980x", mcp980x, },
|| i2c_smbus_read_byte_data(new_client, 7) != os)
return -ENODEV;
}
+ /*
+ * It is very unlikely that this is a LM75 if both
+ * hysteresis and temperature limit registers are 0.
+ */
+ if (hyst == 0 && os == 0)
+ return -ENODEV;
/* Addresses cycling */
for (i = 8; i <= 248; i += 40) {
/*
* Driver for Texas Instruments / National Semiconductor LM95234
*
- * Copyright (c) 2013 Guenter Roeck <linux@roeck-us.net>
+ * Copyright (c) 2013, 2014 Guenter Roeck <linux@roeck-us.net>
*
* Derived from lm95241.c
* Copyright (C) 2008, 2010 Davide Rizzo <elpa.rizzo@gmail.com>
#define DRVNAME "lm95234"
-static const unsigned short normal_i2c[] = { 0x18, 0x4d, 0x4e, I2C_CLIENT_END };
+enum chips { lm95233, lm95234 };
+
+static const unsigned short normal_i2c[] = {
+ 0x18, 0x2a, 0x2b, 0x4d, 0x4e, I2C_CLIENT_END };
/* LM95234 registers */
#define LM95234_REG_MAN_ID 0xFE
#define LM95234_REG_TCRIT_HYST 0x5a
#define NATSEMI_MAN_ID 0x01
+#define LM95233_CHIP_ID 0x89
#define LM95234_CHIP_ID 0x79
/* Client data (each client gets its own) */
struct lm95234_data {
struct i2c_client *client;
+ const struct attribute_group *groups[3];
struct mutex update_lock;
unsigned long last_updated, interval; /* in jiffies */
bool valid; /* false until following fields are valid */
static DEVICE_ATTR(update_interval, S_IWUSR | S_IRUGO, show_interval,
set_interval);
-static struct attribute *lm95234_attrs[] = {
+static struct attribute *lm95234_common_attrs[] = {
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp2_input.dev_attr.attr,
&sensor_dev_attr_temp3_input.dev_attr.attr,
- &sensor_dev_attr_temp4_input.dev_attr.attr,
- &sensor_dev_attr_temp5_input.dev_attr.attr,
&sensor_dev_attr_temp2_fault.dev_attr.attr,
&sensor_dev_attr_temp3_fault.dev_attr.attr,
- &sensor_dev_attr_temp4_fault.dev_attr.attr,
- &sensor_dev_attr_temp5_fault.dev_attr.attr,
&sensor_dev_attr_temp2_type.dev_attr.attr,
&sensor_dev_attr_temp3_type.dev_attr.attr,
- &sensor_dev_attr_temp4_type.dev_attr.attr,
- &sensor_dev_attr_temp5_type.dev_attr.attr,
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp2_max.dev_attr.attr,
&sensor_dev_attr_temp3_max.dev_attr.attr,
- &sensor_dev_attr_temp4_max.dev_attr.attr,
- &sensor_dev_attr_temp5_max.dev_attr.attr,
&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
&sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
&sensor_dev_attr_temp3_max_hyst.dev_attr.attr,
- &sensor_dev_attr_temp4_max_hyst.dev_attr.attr,
- &sensor_dev_attr_temp5_max_hyst.dev_attr.attr,
&sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
&sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
- &sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
- &sensor_dev_attr_temp5_max_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_crit.dev_attr.attr,
&sensor_dev_attr_temp3_crit.dev_attr.attr,
&sensor_dev_attr_temp2_crit_hyst.dev_attr.attr,
&sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
&sensor_dev_attr_temp2_offset.dev_attr.attr,
&sensor_dev_attr_temp3_offset.dev_attr.attr,
+ &dev_attr_update_interval.attr,
+ NULL
+};
+
+static const struct attribute_group lm95234_common_group = {
+ .attrs = lm95234_common_attrs,
+};
+
+static struct attribute *lm95234_attrs[] = {
+ &sensor_dev_attr_temp4_input.dev_attr.attr,
+ &sensor_dev_attr_temp5_input.dev_attr.attr,
+ &sensor_dev_attr_temp4_fault.dev_attr.attr,
+ &sensor_dev_attr_temp5_fault.dev_attr.attr,
+ &sensor_dev_attr_temp4_type.dev_attr.attr,
+ &sensor_dev_attr_temp5_type.dev_attr.attr,
+ &sensor_dev_attr_temp4_max.dev_attr.attr,
+ &sensor_dev_attr_temp5_max.dev_attr.attr,
+ &sensor_dev_attr_temp4_max_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp5_max_hyst.dev_attr.attr,
+ &sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp5_max_alarm.dev_attr.attr,
&sensor_dev_attr_temp4_offset.dev_attr.attr,
&sensor_dev_attr_temp5_offset.dev_attr.attr,
- &dev_attr_update_interval.attr,
NULL
};
-ATTRIBUTE_GROUPS(lm95234);
+
+static const struct attribute_group lm95234_group = {
+ .attrs = lm95234_attrs,
+};
static int lm95234_detect(struct i2c_client *client,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
+ int address = client->addr;
+ u8 config_mask, model_mask;
int mfg_id, chip_id, val;
+ const char *name;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
return -ENODEV;
chip_id = i2c_smbus_read_byte_data(client, LM95234_REG_CHIP_ID);
- if (chip_id != LM95234_CHIP_ID)
+ switch (chip_id) {
+ case LM95233_CHIP_ID:
+ if (address != 0x18 && address != 0x2a && address != 0x2b)
+ return -ENODEV;
+ config_mask = 0xbf;
+ model_mask = 0xf9;
+ name = "lm95233";
+ break;
+ case LM95234_CHIP_ID:
+ if (address != 0x18 && address != 0x4d && address != 0x4e)
+ return -ENODEV;
+ config_mask = 0xbc;
+ model_mask = 0xe1;
+ name = "lm95234";
+ break;
+ default:
return -ENODEV;
+ }
val = i2c_smbus_read_byte_data(client, LM95234_REG_STATUS);
if (val & 0x30)
return -ENODEV;
val = i2c_smbus_read_byte_data(client, LM95234_REG_CONFIG);
- if (val & 0xbc)
+ if (val & config_mask)
return -ENODEV;
val = i2c_smbus_read_byte_data(client, LM95234_REG_CONVRATE);
return -ENODEV;
val = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL);
- if (val & 0xe1)
+ if (val & model_mask)
return -ENODEV;
val = i2c_smbus_read_byte_data(client, LM95234_REG_REM_MODEL_STS);
- if (val & 0xe1)
+ if (val & model_mask)
return -ENODEV;
- strlcpy(info->type, "lm95234", I2C_NAME_SIZE);
+ strlcpy(info->type, name, I2C_NAME_SIZE);
return 0;
}
if (err < 0)
return err;
+ data->groups[0] = &lm95234_common_group;
+ if (id->driver_data == lm95234)
+ data->groups[1] = &lm95234_group;
+
hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
- data,
- lm95234_groups);
+ data, data->groups);
return PTR_ERR_OR_ZERO(hwmon_dev);
}
/* Driver data (common to all clients) */
static const struct i2c_device_id lm95234_id[] = {
- { "lm95234", 0 },
+ { "lm95233", lm95233 },
+ { "lm95234", lm95234 },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm95234_id);
module_i2c_driver(lm95234_driver);
MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
-MODULE_DESCRIPTION("LM95234 sensor driver");
+MODULE_DESCRIPTION("LM95233/LM95234 sensor driver");
MODULE_LICENSE("GPL");
/*
* Copyright (C) 2011 Alexander Stein <alexander.stein@systec-electronic.com>
*
- * The LM95245 is a sensor chip made by National Semiconductors.
+ * The LM95245 is a sensor chip made by TI / National Semiconductor.
* It reports up to two temperatures (its own plus an external one).
- * Complete datasheet can be obtained from National's website at:
- * http://www.national.com/ds.cgi/LM/LM95245.pdf
*
* This driver is based on lm95241.c
*
#include <linux/mutex.h>
#include <linux/sysfs.h>
-#define DEVNAME "lm95245"
-
static const unsigned short normal_i2c[] = {
0x18, 0x19, 0x29, 0x4c, 0x4d, I2C_CLIENT_END };
#define STATUS1_LOC 0x01
#define MANUFACTURER_ID 0x01
-#define DEFAULT_REVISION 0xB3
+#define LM95235_REVISION 0xB1
+#define LM95245_REVISION 0xB3
static const u8 lm95245_reg_address[] = {
LM95245_REG_R_LOCAL_TEMPH_S,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = new_client->adapter;
+ int address = new_client->addr;
+ const char *name;
+ int rev, id;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
return -ENODEV;
- if (i2c_smbus_read_byte_data(new_client, LM95245_REG_R_MAN_ID)
- != MANUFACTURER_ID
- || i2c_smbus_read_byte_data(new_client, LM95245_REG_R_CHIP_ID)
- != DEFAULT_REVISION)
+ id = i2c_smbus_read_byte_data(new_client, LM95245_REG_R_MAN_ID);
+ if (id != MANUFACTURER_ID)
return -ENODEV;
- strlcpy(info->type, DEVNAME, I2C_NAME_SIZE);
+ rev = i2c_smbus_read_byte_data(new_client, LM95245_REG_R_CHIP_ID);
+ switch (rev) {
+ case LM95235_REVISION:
+ if (address != 0x18 && address != 0x29 && address != 0x4c)
+ return -ENODEV;
+ name = "lm95235";
+ break;
+ case LM95245_REVISION:
+ name = "lm95245";
+ break;
+ default:
+ return -ENODEV;
+ }
+
+ strlcpy(info->type, name, I2C_NAME_SIZE);
return 0;
}
/* Driver data (common to all clients) */
static const struct i2c_device_id lm95245_id[] = {
- { DEVNAME, 0 },
+ { "lm95235", 0 },
+ { "lm95245", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, lm95245_id);
static struct i2c_driver lm95245_driver = {
.class = I2C_CLASS_HWMON,
.driver = {
- .name = DEVNAME,
+ .name = "lm95245",
},
.probe = lm95245_probe,
.id_table = lm95245_id,
module_i2c_driver(lm95245_driver);
MODULE_AUTHOR("Alexander Stein <alexander.stein@systec-electronic.com>");
-MODULE_DESCRIPTION("LM95245 sensor driver");
+MODULE_DESCRIPTION("LM95235/LM95245 sensor driver");
MODULE_LICENSE("GPL");
#include <linux/jiffies.h>
#include <linux/slab.h>
#include <linux/i2c.h>
+#include <linux/err.h>
#define DRV_NAME "menf21bmc_hwmon"
* nct6776f 9 5 3 6+3 0xc330 0xc1 0x5ca3
* nct6779d 15 5 5 2+6 0xc560 0xc1 0x5ca3
* nct6791d 15 6 6 2+6 0xc800 0xc1 0x5ca3
+ * nct6792d 15 6 6 2+6 0xc910 0xc1 0x5ca3
*
* #temp lists the number of monitored temperature sources (first value) plus
* the number of directly connectable temperature sensors (second value).
#define USE_ALTERNATE
-enum kinds { nct6106, nct6775, nct6776, nct6779, nct6791 };
+enum kinds { nct6106, nct6775, nct6776, nct6779, nct6791, nct6792 };
/* used to set data->name = nct6775_device_names[data->sio_kind] */
static const char * const nct6775_device_names[] = {
"nct6776",
"nct6779",
"nct6791",
+ "nct6792",
};
static unsigned short force_id;
#define SIO_NCT6776_ID 0xc330
#define SIO_NCT6779_ID 0xc560
#define SIO_NCT6791_ID 0xc800
+#define SIO_NCT6792_ID 0xc910
#define SIO_ID_MASK 0xFFF0
enum pwm_enable { off, manual, thermal_cruise, speed_cruise, sf3, sf4 };
4, 5, 13, -1, -1, -1, /* temp1..temp6 */
12, 9 }; /* intrusion0, intrusion1 */
+/* NCT6792 specific data */
+
+static const u16 NCT6792_REG_TEMP_MON[] = {
+ 0x73, 0x75, 0x77, 0x79, 0x7b, 0x7d };
+static const u16 NCT6792_REG_BEEP[NUM_REG_BEEP] = {
+ 0xb2, 0xb3, 0xb4, 0xb5, 0xbf };
/* NCT6102D/NCT6106D specific data */
reg == 0x73 || reg == 0x75 || reg == 0x77;
case nct6779:
case nct6791:
+ case nct6792:
return reg == 0x150 || reg == 0x153 || reg == 0x155 ||
((reg & 0xfff0) == 0x4b0 && (reg & 0x000f) < 0x0b) ||
reg == 0x402 ||
reg == 0x63a || reg == 0x63c || reg == 0x63e ||
reg == 0x640 || reg == 0x642 ||
reg == 0x73 || reg == 0x75 || reg == 0x77 || reg == 0x79 ||
- reg == 0x7b;
+ reg == 0x7b || reg == 0x7d;
}
return false;
}
static inline void nct6775_set_bank(struct nct6775_data *data, u16 reg)
{
u8 bank = reg >> 8;
+
if (data->bank != bank) {
outb_p(NCT6775_REG_BANK, data->addr + ADDR_REG_OFFSET);
outb_p(bank, data->addr + DATA_REG_OFFSET);
if (!data->target_speed_tolerance[i] ||
data->pwm_enable[i] == speed_cruise) {
u8 t = fanmodecfg & 0x0f;
+
if (data->REG_TOLERANCE_H) {
t |= (nct6775_read_value(data,
data->REG_TOLERANCE_H[i]) & 0x70) >> 1;
case nct6106:
case nct6779:
case nct6791:
+ case nct6792:
reg = nct6775_read_value(data,
data->REG_CRITICAL_PWM_ENABLE[i]);
if (reg & data->CRITICAL_PWM_ENABLE_MASK)
data->alarms = 0;
for (i = 0; i < NUM_REG_ALARM; i++) {
u8 alarm;
+
if (!data->REG_ALARM[i])
continue;
alarm = nct6775_read_value(data, data->REG_ALARM[i]);
data->beeps = 0;
for (i = 0; i < NUM_REG_BEEP; i++) {
u8 beep;
+
if (!data->REG_BEEP[i])
continue;
beep = nct6775_read_value(data, data->REG_BEEP[i]);
{
struct nct6775_data *data = nct6775_update_device(dev);
struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
- int nr = sattr->nr;
int index = sattr->index;
+ int nr = sattr->nr;
+
return sprintf(buf, "%ld\n", in_from_reg(data->in[nr][index], nr));
}
{
struct nct6775_data *data = dev_get_drvdata(dev);
struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
- int nr = sattr->nr;
int index = sattr->index;
+ int nr = sattr->nr;
unsigned long val;
- int err = kstrtoul(buf, 10, &val);
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
if (err < 0)
return err;
mutex_lock(&data->update_lock);
struct nct6775_data *data = nct6775_update_device(dev);
struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
int nr = data->ALARM_BITS[sattr->index];
+
return sprintf(buf, "%u\n",
(unsigned int)((data->alarms >> nr) & 0x01));
}
nr = find_temp_source(data, sattr->index, data->num_temp_alarms);
if (nr >= 0) {
int bit = data->ALARM_BITS[nr + TEMP_ALARM_BASE];
+
alarm = (data->alarms >> bit) & 0x01;
}
return sprintf(buf, "%u\n", alarm);
int nr = data->BEEP_BITS[sattr->index];
int regindex = nr >> 3;
unsigned long val;
+ int err;
- int err = kstrtoul(buf, 10, &val);
+ err = kstrtoul(buf, 10, &val);
if (err < 0)
return err;
if (val > 1)
nr = find_temp_source(data, sattr->index, data->num_temp_beeps);
if (nr >= 0) {
int bit = data->BEEP_BITS[nr + TEMP_ALARM_BASE];
+
beep = (data->beeps >> bit) & 0x01;
}
return sprintf(buf, "%u\n", beep);
struct nct6775_data *data = dev_get_drvdata(dev);
int nr, bit, regindex;
unsigned long val;
+ int err;
- int err = kstrtoul(buf, 10, &val);
+ err = kstrtoul(buf, 10, &val);
if (err < 0)
return err;
if (val > 1)
struct nct6775_data *data = nct6775_update_device(dev);
struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
int nr = sattr->index;
+
return sprintf(buf, "%d\n", data->rpm[nr]);
}
struct nct6775_data *data = nct6775_update_device(dev);
struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
int nr = sattr->index;
+
return sprintf(buf, "%d\n",
data->fan_from_reg_min(data->fan_min[nr],
data->fan_div[nr]));
struct nct6775_data *data = nct6775_update_device(dev);
struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
int nr = sattr->index;
+
return sprintf(buf, "%u\n", div_from_reg(data->fan_div[nr]));
}
struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
int nr = sattr->index;
unsigned long val;
- int err;
unsigned int reg;
u8 new_div;
+ int err;
err = kstrtoul(buf, 10, &val);
if (err < 0)
struct nct6775_data *data = nct6775_update_device(dev);
struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
int nr = sattr->index;
+
return sprintf(buf, "%s\n", data->temp_label[data->temp_src[nr]]);
}
struct nct6775_data *data = nct6775_update_device(dev);
struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
int nr = sattr->index;
+
return sprintf(buf, "%d\n", (int)data->temp_type[nr]);
}
case nct6106:
case nct6779:
case nct6791:
+ case nct6792:
nct6775_write_value(data, data->REG_CRITICAL_PWM[nr],
val);
reg = nct6775_read_value(data,
show_vid(struct device *dev, struct device_attribute *attr, char *buf)
{
struct nct6775_data *data = dev_get_drvdata(dev);
+
return sprintf(buf, "%d\n", vid_from_reg(data->vid, data->vrm));
}
pwm4pin = false;
pwm5pin = false;
pwm6pin = false;
- } else { /* NCT6779D or NCT6791D */
+ } else { /* NCT6779D, NCT6791D, or NCT6792D */
regval = superio_inb(sioreg, 0x1c);
fan3pin = !(regval & (1 << 5));
fan4min = fan4pin;
- if (data->kind == nct6791) {
+ if (data->kind == nct6791 || data->kind == nct6792) {
regval = superio_inb(sioreg, 0x2d);
fan6pin = (regval & (1 << 1));
pwm6pin = (regval & (1 << 0));
break;
case nct6791:
+ case nct6792:
data->in_num = 15;
data->pwm_num = 6;
data->auto_pwm_num = 4;
data->REG_WEIGHT_TEMP[1] = NCT6791_REG_WEIGHT_TEMP_STEP_TOL;
data->REG_WEIGHT_TEMP[2] = NCT6791_REG_WEIGHT_TEMP_BASE;
data->REG_ALARM = NCT6791_REG_ALARM;
- data->REG_BEEP = NCT6776_REG_BEEP;
+ if (data->kind == nct6791)
+ data->REG_BEEP = NCT6776_REG_BEEP;
+ else
+ data->REG_BEEP = NCT6792_REG_BEEP;
reg_temp = NCT6779_REG_TEMP;
- reg_temp_mon = NCT6779_REG_TEMP_MON;
num_reg_temp = ARRAY_SIZE(NCT6779_REG_TEMP);
- num_reg_temp_mon = ARRAY_SIZE(NCT6779_REG_TEMP_MON);
+ if (data->kind == nct6791) {
+ reg_temp_mon = NCT6779_REG_TEMP_MON;
+ num_reg_temp_mon = ARRAY_SIZE(NCT6779_REG_TEMP_MON);
+ } else {
+ reg_temp_mon = NCT6792_REG_TEMP_MON;
+ num_reg_temp_mon = ARRAY_SIZE(NCT6792_REG_TEMP_MON);
+ }
reg_temp_over = NCT6779_REG_TEMP_OVER;
reg_temp_hyst = NCT6779_REG_TEMP_HYST;
reg_temp_config = NCT6779_REG_TEMP_CONFIG;
case nct6106:
case nct6779:
case nct6791:
+ case nct6792:
break;
}
tmp |= 0x3e;
break;
case nct6791:
+ case nct6792:
tmp |= 0x7e;
break;
}
mutex_lock(&data->update_lock);
data->bank = 0xff; /* Force initial bank selection */
- if (data->kind == nct6791) {
+ if (data->kind == nct6791 || data->kind == nct6792) {
err = superio_enter(data->sioreg);
if (err)
goto abort;
"NCT6776D/F",
"NCT6779D",
"NCT6791D",
+ "NCT6792D",
};
/* nct6775_find() looks for a '627 in the Super-I/O config space */
case SIO_NCT6791_ID:
sio_data->kind = nct6791;
break;
+ case SIO_NCT6792_ID:
+ sio_data->kind = nct6792;
+ break;
default:
if (val != 0xffff)
pr_debug("unsupported chip ID: 0x%04x\n", val);
superio_outb(sioaddr, SIO_REG_ENABLE, val | 0x01);
}
- if (sio_data->kind == nct6791)
+ if (sio_data->kind == nct6791 || sio_data->kind == nct6792)
nct6791_enable_io_mapping(sioaddr);
superio_exit(sioaddr);
}
MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
-MODULE_DESCRIPTION("NCT6106D/NCT6775F/NCT6776F/NCT6779D/NCT6791D driver");
+MODULE_DESCRIPTION("NCT6106D/NCT6775F/NCT6776F/NCT6779D/NCT6791D/NCT6792D driver");
MODULE_LICENSE("GPL");
module_init(sensors_nct6775_init);
--- /dev/null
+/*
+ * nct7802 - Driver for Nuvoton NCT7802Y
+ *
+ * Copyright (C) 2014 Guenter Roeck <linux@roeck-us.net>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/jiffies.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+#define DRVNAME "nct7802"
+
+static const u8 REG_VOLTAGE[5] = { 0x09, 0x0a, 0x0c, 0x0d, 0x0e };
+
+static const u8 REG_VOLTAGE_LIMIT_LSB[2][5] = {
+ { 0x40, 0x00, 0x42, 0x44, 0x46 },
+ { 0x3f, 0x00, 0x41, 0x43, 0x45 },
+};
+
+static const u8 REG_VOLTAGE_LIMIT_MSB[5] = { 0x48, 0x00, 0x47, 0x47, 0x48 };
+
+static const u8 REG_VOLTAGE_LIMIT_MSB_SHIFT[2][5] = {
+ { 0, 0, 4, 0, 4 },
+ { 2, 0, 6, 2, 6 },
+};
+
+#define REG_BANK 0x00
+#define REG_TEMP_LSB 0x05
+#define REG_TEMP_PECI_LSB 0x08
+#define REG_VOLTAGE_LOW 0x0f
+#define REG_FANCOUNT_LOW 0x13
+#define REG_START 0x21
+#define REG_MODE 0x22
+#define REG_PECI_ENABLE 0x23
+#define REG_FAN_ENABLE 0x24
+#define REG_VMON_ENABLE 0x25
+#define REG_VENDOR_ID 0xfd
+#define REG_CHIP_ID 0xfe
+#define REG_VERSION_ID 0xff
+
+/*
+ * Data structures and manipulation thereof
+ */
+
+struct nct7802_data {
+ struct regmap *regmap;
+ struct mutex access_lock; /* for multi-byte read and write operations */
+};
+
+static int nct7802_read_temp(struct nct7802_data *data,
+ u8 reg_temp, u8 reg_temp_low, int *temp)
+{
+ unsigned int t1, t2 = 0;
+ int err;
+
+ *temp = 0;
+
+ mutex_lock(&data->access_lock);
+ err = regmap_read(data->regmap, reg_temp, &t1);
+ if (err < 0)
+ goto abort;
+ t1 <<= 8;
+ if (reg_temp_low) { /* 11 bit data */
+ err = regmap_read(data->regmap, reg_temp_low, &t2);
+ if (err < 0)
+ goto abort;
+ }
+ t1 |= t2 & 0xe0;
+ *temp = (s16)t1 / 32 * 125;
+abort:
+ mutex_unlock(&data->access_lock);
+ return err;
+}
+
+static int nct7802_read_fan(struct nct7802_data *data, u8 reg_fan)
+{
+ unsigned int f1, f2;
+ int ret;
+
+ mutex_lock(&data->access_lock);
+ ret = regmap_read(data->regmap, reg_fan, &f1);
+ if (ret < 0)
+ goto abort;
+ ret = regmap_read(data->regmap, REG_FANCOUNT_LOW, &f2);
+ if (ret < 0)
+ goto abort;
+ ret = (f1 << 5) | (f2 >> 3);
+ /* convert fan count to rpm */
+ if (ret == 0x1fff) /* maximum value, assume fan is stopped */
+ ret = 0;
+ else if (ret)
+ ret = DIV_ROUND_CLOSEST(1350000U, ret);
+abort:
+ mutex_unlock(&data->access_lock);
+ return ret;
+}
+
+static int nct7802_read_fan_min(struct nct7802_data *data, u8 reg_fan_low,
+ u8 reg_fan_high)
+{
+ unsigned int f1, f2;
+ int ret;
+
+ mutex_lock(&data->access_lock);
+ ret = regmap_read(data->regmap, reg_fan_low, &f1);
+ if (ret < 0)
+ goto abort;
+ ret = regmap_read(data->regmap, reg_fan_high, &f2);
+ if (ret < 0)
+ goto abort;
+ ret = f1 | ((f2 & 0xf8) << 5);
+ /* convert fan count to rpm */
+ if (ret == 0x1fff) /* maximum value, assume no limit */
+ ret = 0;
+ else if (ret)
+ ret = DIV_ROUND_CLOSEST(1350000U, ret);
+abort:
+ mutex_unlock(&data->access_lock);
+ return ret;
+}
+
+static int nct7802_write_fan_min(struct nct7802_data *data, u8 reg_fan_low,
+ u8 reg_fan_high, unsigned int limit)
+{
+ int err;
+
+ if (limit)
+ limit = DIV_ROUND_CLOSEST(1350000U, limit);
+ else
+ limit = 0x1fff;
+ limit = clamp_val(limit, 0, 0x1fff);
+
+ mutex_lock(&data->access_lock);
+ err = regmap_write(data->regmap, reg_fan_low, limit & 0xff);
+ if (err < 0)
+ goto abort;
+
+ err = regmap_write(data->regmap, reg_fan_high, (limit & 0x1f00) >> 5);
+abort:
+ mutex_unlock(&data->access_lock);
+ return err;
+}
+
+static u8 nct7802_vmul[] = { 4, 2, 2, 2, 2 };
+
+static int nct7802_read_voltage(struct nct7802_data *data, int nr, int index)
+{
+ unsigned int v1, v2;
+ int ret;
+
+ mutex_lock(&data->access_lock);
+ if (index == 0) { /* voltage */
+ ret = regmap_read(data->regmap, REG_VOLTAGE[nr], &v1);
+ if (ret < 0)
+ goto abort;
+ ret = regmap_read(data->regmap, REG_VOLTAGE_LOW, &v2);
+ if (ret < 0)
+ goto abort;
+ ret = ((v1 << 2) | (v2 >> 6)) * nct7802_vmul[nr];
+ } else { /* limit */
+ int shift = 8 - REG_VOLTAGE_LIMIT_MSB_SHIFT[index - 1][nr];
+
+ ret = regmap_read(data->regmap,
+ REG_VOLTAGE_LIMIT_LSB[index - 1][nr], &v1);
+ if (ret < 0)
+ goto abort;
+ ret = regmap_read(data->regmap, REG_VOLTAGE_LIMIT_MSB[nr],
+ &v2);
+ if (ret < 0)
+ goto abort;
+ ret = (v1 | ((v2 << shift) & 0x300)) * nct7802_vmul[nr];
+ }
+abort:
+ mutex_unlock(&data->access_lock);
+ return ret;
+}
+
+static int nct7802_write_voltage(struct nct7802_data *data, int nr, int index,
+ unsigned int voltage)
+{
+ int shift = 8 - REG_VOLTAGE_LIMIT_MSB_SHIFT[index - 1][nr];
+ int err;
+
+ voltage = DIV_ROUND_CLOSEST(voltage, nct7802_vmul[nr]);
+ voltage = clamp_val(voltage, 0, 0x3ff);
+
+ mutex_lock(&data->access_lock);
+ err = regmap_write(data->regmap,
+ REG_VOLTAGE_LIMIT_LSB[index - 1][nr],
+ voltage & 0xff);
+ if (err < 0)
+ goto abort;
+
+ err = regmap_update_bits(data->regmap, REG_VOLTAGE_LIMIT_MSB[nr],
+ 0x0300 >> shift, (voltage & 0x0300) >> shift);
+abort:
+ mutex_unlock(&data->access_lock);
+ return err;
+}
+
+static ssize_t show_in(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct nct7802_data *data = dev_get_drvdata(dev);
+ int voltage;
+
+ voltage = nct7802_read_voltage(data, sattr->nr, sattr->index);
+ if (voltage < 0)
+ return voltage;
+
+ return sprintf(buf, "%d\n", voltage);
+}
+
+static ssize_t store_in(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct nct7802_data *data = dev_get_drvdata(dev);
+ int index = sattr->index;
+ int nr = sattr->nr;
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+
+ err = nct7802_write_voltage(data, nr, index, val);
+ return err ? : count;
+}
+
+static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct nct7802_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ int err, temp;
+
+ err = nct7802_read_temp(data, sattr->nr, sattr->index, &temp);
+ if (err < 0)
+ return err;
+
+ return sprintf(buf, "%d\n", temp);
+}
+
+static ssize_t store_temp(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct nct7802_data *data = dev_get_drvdata(dev);
+ int nr = sattr->nr;
+ long val;
+ int err;
+
+ err = kstrtol(buf, 10, &val);
+ if (err < 0)
+ return err;
+
+ val = clamp_val(DIV_ROUND_CLOSEST(val, 1000), -128, 127);
+
+ err = regmap_write(data->regmap, nr, val & 0xff);
+ return err ? : count;
+}
+
+static ssize_t show_fan(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute *sattr = to_sensor_dev_attr(attr);
+ struct nct7802_data *data = dev_get_drvdata(dev);
+ int speed;
+
+ speed = nct7802_read_fan(data, sattr->index);
+ if (speed < 0)
+ return speed;
+
+ return sprintf(buf, "%d\n", speed);
+}
+
+static ssize_t show_fan_min(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct nct7802_data *data = dev_get_drvdata(dev);
+ int speed;
+
+ speed = nct7802_read_fan_min(data, sattr->nr, sattr->index);
+ if (speed < 0)
+ return speed;
+
+ return sprintf(buf, "%d\n", speed);
+}
+
+static ssize_t store_fan_min(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct nct7802_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+
+ err = nct7802_write_fan_min(data, sattr->nr, sattr->index, val);
+ return err ? : count;
+}
+
+static ssize_t show_alarm(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct nct7802_data *data = dev_get_drvdata(dev);
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ int bit = sattr->index;
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(data->regmap, sattr->nr, &val);
+ if (ret < 0)
+ return ret;
+
+ return sprintf(buf, "%u\n", !!(val & (1 << bit)));
+}
+
+static ssize_t
+show_beep(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct nct7802_data *data = dev_get_drvdata(dev);
+ unsigned int regval;
+ int err;
+
+ err = regmap_read(data->regmap, sattr->nr, ®val);
+ if (err)
+ return err;
+
+ return sprintf(buf, "%u\n", !!(regval & (1 << sattr->index)));
+}
+
+static ssize_t
+store_beep(struct device *dev, struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ struct sensor_device_attribute_2 *sattr = to_sensor_dev_attr_2(attr);
+ struct nct7802_data *data = dev_get_drvdata(dev);
+ unsigned long val;
+ int err;
+
+ err = kstrtoul(buf, 10, &val);
+ if (err < 0)
+ return err;
+ if (val > 1)
+ return -EINVAL;
+
+ err = regmap_update_bits(data->regmap, sattr->nr, 1 << sattr->index,
+ val ? 1 << sattr->index : 0);
+ return err ? : count;
+}
+
+static SENSOR_DEVICE_ATTR_2(temp1_input, S_IRUGO, show_temp, NULL, 0x01,
+ REG_TEMP_LSB);
+static SENSOR_DEVICE_ATTR_2(temp1_min, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x31, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_max, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x30, 0);
+static SENSOR_DEVICE_ATTR_2(temp1_crit, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x3a, 0);
+
+static SENSOR_DEVICE_ATTR_2(temp2_input, S_IRUGO, show_temp, NULL, 0x02,
+ REG_TEMP_LSB);
+static SENSOR_DEVICE_ATTR_2(temp2_min, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x33, 0);
+static SENSOR_DEVICE_ATTR_2(temp2_max, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x32, 0);
+static SENSOR_DEVICE_ATTR_2(temp2_crit, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x3b, 0);
+
+static SENSOR_DEVICE_ATTR_2(temp3_input, S_IRUGO, show_temp, NULL, 0x03,
+ REG_TEMP_LSB);
+static SENSOR_DEVICE_ATTR_2(temp3_min, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x35, 0);
+static SENSOR_DEVICE_ATTR_2(temp3_max, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x34, 0);
+static SENSOR_DEVICE_ATTR_2(temp3_crit, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x3c, 0);
+
+static SENSOR_DEVICE_ATTR_2(temp4_input, S_IRUGO, show_temp, NULL, 0x04, 0);
+static SENSOR_DEVICE_ATTR_2(temp4_min, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x37, 0);
+static SENSOR_DEVICE_ATTR_2(temp4_max, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x36, 0);
+static SENSOR_DEVICE_ATTR_2(temp4_crit, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x3d, 0);
+
+static SENSOR_DEVICE_ATTR_2(temp5_input, S_IRUGO, show_temp, NULL, 0x06,
+ REG_TEMP_PECI_LSB);
+static SENSOR_DEVICE_ATTR_2(temp5_min, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x39, 0);
+static SENSOR_DEVICE_ATTR_2(temp5_max, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x38, 0);
+static SENSOR_DEVICE_ATTR_2(temp5_crit, S_IRUGO | S_IWUSR, show_temp,
+ store_temp, 0x3e, 0);
+
+static SENSOR_DEVICE_ATTR_2(temp6_input, S_IRUGO, show_temp, NULL, 0x07,
+ REG_TEMP_PECI_LSB);
+
+static SENSOR_DEVICE_ATTR_2(temp1_min_alarm, S_IRUGO, show_alarm, NULL,
+ 0x18, 0);
+static SENSOR_DEVICE_ATTR_2(temp2_min_alarm, S_IRUGO, show_alarm, NULL,
+ 0x18, 1);
+static SENSOR_DEVICE_ATTR_2(temp3_min_alarm, S_IRUGO, show_alarm, NULL,
+ 0x18, 2);
+static SENSOR_DEVICE_ATTR_2(temp4_min_alarm, S_IRUGO, show_alarm, NULL,
+ 0x18, 3);
+static SENSOR_DEVICE_ATTR_2(temp5_min_alarm, S_IRUGO, show_alarm, NULL,
+ 0x18, 4);
+
+static SENSOR_DEVICE_ATTR_2(temp1_max_alarm, S_IRUGO, show_alarm, NULL,
+ 0x19, 0);
+static SENSOR_DEVICE_ATTR_2(temp2_max_alarm, S_IRUGO, show_alarm, NULL,
+ 0x19, 1);
+static SENSOR_DEVICE_ATTR_2(temp3_max_alarm, S_IRUGO, show_alarm, NULL,
+ 0x19, 2);
+static SENSOR_DEVICE_ATTR_2(temp4_max_alarm, S_IRUGO, show_alarm, NULL,
+ 0x19, 3);
+static SENSOR_DEVICE_ATTR_2(temp5_max_alarm, S_IRUGO, show_alarm, NULL,
+ 0x19, 4);
+
+static SENSOR_DEVICE_ATTR_2(temp1_crit_alarm, S_IRUGO, show_alarm, NULL,
+ 0x1b, 0);
+static SENSOR_DEVICE_ATTR_2(temp2_crit_alarm, S_IRUGO, show_alarm, NULL,
+ 0x1b, 1);
+static SENSOR_DEVICE_ATTR_2(temp3_crit_alarm, S_IRUGO, show_alarm, NULL,
+ 0x1b, 2);
+static SENSOR_DEVICE_ATTR_2(temp4_crit_alarm, S_IRUGO, show_alarm, NULL,
+ 0x1b, 3);
+static SENSOR_DEVICE_ATTR_2(temp5_crit_alarm, S_IRUGO, show_alarm, NULL,
+ 0x1b, 4);
+
+static SENSOR_DEVICE_ATTR_2(temp1_fault, S_IRUGO, show_alarm, NULL, 0x17, 0);
+static SENSOR_DEVICE_ATTR_2(temp2_fault, S_IRUGO, show_alarm, NULL, 0x17, 1);
+static SENSOR_DEVICE_ATTR_2(temp3_fault, S_IRUGO, show_alarm, NULL, 0x17, 2);
+
+static SENSOR_DEVICE_ATTR_2(temp1_beep, S_IRUGO | S_IWUSR, show_beep,
+ store_beep, 0x5c, 0);
+static SENSOR_DEVICE_ATTR_2(temp2_beep, S_IRUGO | S_IWUSR, show_beep,
+ store_beep, 0x5c, 1);
+static SENSOR_DEVICE_ATTR_2(temp3_beep, S_IRUGO | S_IWUSR, show_beep,
+ store_beep, 0x5c, 2);
+static SENSOR_DEVICE_ATTR_2(temp4_beep, S_IRUGO | S_IWUSR, show_beep,
+ store_beep, 0x5c, 3);
+static SENSOR_DEVICE_ATTR_2(temp5_beep, S_IRUGO | S_IWUSR, show_beep,
+ store_beep, 0x5c, 4);
+static SENSOR_DEVICE_ATTR_2(temp6_beep, S_IRUGO | S_IWUSR, show_beep,
+ store_beep, 0x5c, 5);
+
+static struct attribute *nct7802_temp_attrs[] = {
+ &sensor_dev_attr_temp1_input.dev_attr.attr,
+ &sensor_dev_attr_temp1_min.dev_attr.attr,
+ &sensor_dev_attr_temp1_max.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit.dev_attr.attr,
+ &sensor_dev_attr_temp1_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp1_fault.dev_attr.attr,
+ &sensor_dev_attr_temp1_beep.dev_attr.attr,
+
+ &sensor_dev_attr_temp2_input.dev_attr.attr, /* 9 */
+ &sensor_dev_attr_temp2_min.dev_attr.attr,
+ &sensor_dev_attr_temp2_max.dev_attr.attr,
+ &sensor_dev_attr_temp2_crit.dev_attr.attr,
+ &sensor_dev_attr_temp2_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp2_fault.dev_attr.attr,
+ &sensor_dev_attr_temp2_beep.dev_attr.attr,
+
+ &sensor_dev_attr_temp3_input.dev_attr.attr, /* 18 */
+ &sensor_dev_attr_temp3_min.dev_attr.attr,
+ &sensor_dev_attr_temp3_max.dev_attr.attr,
+ &sensor_dev_attr_temp3_crit.dev_attr.attr,
+ &sensor_dev_attr_temp3_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp3_fault.dev_attr.attr,
+ &sensor_dev_attr_temp3_beep.dev_attr.attr,
+
+ &sensor_dev_attr_temp4_input.dev_attr.attr, /* 27 */
+ &sensor_dev_attr_temp4_min.dev_attr.attr,
+ &sensor_dev_attr_temp4_max.dev_attr.attr,
+ &sensor_dev_attr_temp4_crit.dev_attr.attr,
+ &sensor_dev_attr_temp4_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp4_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp4_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp4_beep.dev_attr.attr,
+
+ &sensor_dev_attr_temp5_input.dev_attr.attr, /* 35 */
+ &sensor_dev_attr_temp5_min.dev_attr.attr,
+ &sensor_dev_attr_temp5_max.dev_attr.attr,
+ &sensor_dev_attr_temp5_crit.dev_attr.attr,
+ &sensor_dev_attr_temp5_min_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp5_max_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp5_crit_alarm.dev_attr.attr,
+ &sensor_dev_attr_temp5_beep.dev_attr.attr,
+
+ &sensor_dev_attr_temp6_input.dev_attr.attr, /* 43 */
+ &sensor_dev_attr_temp6_beep.dev_attr.attr,
+
+ NULL
+};
+
+static umode_t nct7802_temp_is_visible(struct kobject *kobj,
+ struct attribute *attr, int index)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct nct7802_data *data = dev_get_drvdata(dev);
+ unsigned int reg;
+ int err;
+
+ err = regmap_read(data->regmap, REG_MODE, ®);
+ if (err < 0)
+ return 0;
+
+ if (index < 9 &&
+ (reg & 03) != 0x01 && (reg & 0x03) != 0x02) /* RD1 */
+ return 0;
+ if (index >= 9 && index < 18 &&
+ (reg & 0x0c) != 0x04 && (reg & 0x0c) != 0x08) /* RD2 */
+ return 0;
+ if (index >= 18 && index < 27 && (reg & 0x30) != 0x10) /* RD3 */
+ return 0;
+ if (index >= 27 && index < 35) /* local */
+ return attr->mode;
+
+ err = regmap_read(data->regmap, REG_PECI_ENABLE, ®);
+ if (err < 0)
+ return 0;
+
+ if (index >= 35 && index < 43 && !(reg & 0x01)) /* PECI 0 */
+ return 0;
+
+ if (index >= 0x43 && (!(reg & 0x02))) /* PECI 1 */
+ return 0;
+
+ return attr->mode;
+}
+
+static struct attribute_group nct7802_temp_group = {
+ .attrs = nct7802_temp_attrs,
+ .is_visible = nct7802_temp_is_visible,
+};
+
+static SENSOR_DEVICE_ATTR_2(in0_input, S_IRUGO, show_in, NULL, 0, 0);
+static SENSOR_DEVICE_ATTR_2(in0_min, S_IRUGO | S_IWUSR, show_in, store_in,
+ 0, 1);
+static SENSOR_DEVICE_ATTR_2(in0_max, S_IRUGO | S_IWUSR, show_in, store_in,
+ 0, 2);
+static SENSOR_DEVICE_ATTR_2(in0_alarm, S_IRUGO, show_alarm, NULL, 0x1e, 3);
+static SENSOR_DEVICE_ATTR_2(in0_beep, S_IRUGO | S_IWUSR, show_beep, store_beep,
+ 0x5a, 3);
+
+static SENSOR_DEVICE_ATTR_2(in1_input, S_IRUGO, show_in, NULL, 1, 0);
+
+static SENSOR_DEVICE_ATTR_2(in2_input, S_IRUGO, show_in, NULL, 2, 0);
+static SENSOR_DEVICE_ATTR_2(in2_min, S_IRUGO | S_IWUSR, show_in, store_in,
+ 2, 1);
+static SENSOR_DEVICE_ATTR_2(in2_max, S_IRUGO | S_IWUSR, show_in, store_in,
+ 2, 2);
+static SENSOR_DEVICE_ATTR_2(in2_alarm, S_IRUGO, show_alarm, NULL, 0x1e, 0);
+static SENSOR_DEVICE_ATTR_2(in2_beep, S_IRUGO | S_IWUSR, show_beep, store_beep,
+ 0x5a, 0);
+
+static SENSOR_DEVICE_ATTR_2(in3_input, S_IRUGO, show_in, NULL, 3, 0);
+static SENSOR_DEVICE_ATTR_2(in3_min, S_IRUGO | S_IWUSR, show_in, store_in,
+ 3, 1);
+static SENSOR_DEVICE_ATTR_2(in3_max, S_IRUGO | S_IWUSR, show_in, store_in,
+ 3, 2);
+static SENSOR_DEVICE_ATTR_2(in3_alarm, S_IRUGO, show_alarm, NULL, 0x1e, 1);
+static SENSOR_DEVICE_ATTR_2(in3_beep, S_IRUGO | S_IWUSR, show_beep, store_beep,
+ 0x5a, 1);
+
+static SENSOR_DEVICE_ATTR_2(in4_input, S_IRUGO, show_in, NULL, 4, 0);
+static SENSOR_DEVICE_ATTR_2(in4_min, S_IRUGO | S_IWUSR, show_in, store_in,
+ 4, 1);
+static SENSOR_DEVICE_ATTR_2(in4_max, S_IRUGO | S_IWUSR, show_in, store_in,
+ 4, 2);
+static SENSOR_DEVICE_ATTR_2(in4_alarm, S_IRUGO, show_alarm, NULL, 0x1e, 2);
+static SENSOR_DEVICE_ATTR_2(in4_beep, S_IRUGO | S_IWUSR, show_beep, store_beep,
+ 0x5a, 2);
+
+static struct attribute *nct7802_in_attrs[] = {
+ &sensor_dev_attr_in0_input.dev_attr.attr,
+ &sensor_dev_attr_in0_min.dev_attr.attr,
+ &sensor_dev_attr_in0_max.dev_attr.attr,
+ &sensor_dev_attr_in0_alarm.dev_attr.attr,
+ &sensor_dev_attr_in0_beep.dev_attr.attr,
+
+ &sensor_dev_attr_in1_input.dev_attr.attr, /* 5 */
+
+ &sensor_dev_attr_in2_input.dev_attr.attr, /* 6 */
+ &sensor_dev_attr_in2_min.dev_attr.attr,
+ &sensor_dev_attr_in2_max.dev_attr.attr,
+ &sensor_dev_attr_in2_alarm.dev_attr.attr,
+ &sensor_dev_attr_in2_beep.dev_attr.attr,
+
+ &sensor_dev_attr_in3_input.dev_attr.attr, /* 11 */
+ &sensor_dev_attr_in3_min.dev_attr.attr,
+ &sensor_dev_attr_in3_max.dev_attr.attr,
+ &sensor_dev_attr_in3_alarm.dev_attr.attr,
+ &sensor_dev_attr_in3_beep.dev_attr.attr,
+
+ &sensor_dev_attr_in4_input.dev_attr.attr, /* 17 */
+ &sensor_dev_attr_in4_min.dev_attr.attr,
+ &sensor_dev_attr_in4_max.dev_attr.attr,
+ &sensor_dev_attr_in4_alarm.dev_attr.attr,
+ &sensor_dev_attr_in4_beep.dev_attr.attr,
+
+ NULL,
+};
+
+static umode_t nct7802_in_is_visible(struct kobject *kobj,
+ struct attribute *attr, int index)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct nct7802_data *data = dev_get_drvdata(dev);
+ unsigned int reg;
+ int err;
+
+ if (index < 6) /* VCC, VCORE */
+ return attr->mode;
+
+ err = regmap_read(data->regmap, REG_MODE, ®);
+ if (err < 0)
+ return 0;
+
+ if (index >= 6 && index < 11 && (reg & 0x03) != 0x03) /* VSEN1 */
+ return 0;
+ if (index >= 11 && index < 17 && (reg & 0x0c) != 0x0c) /* VSEN2 */
+ return 0;
+ if (index >= 17 && (reg & 0x30) != 0x30) /* VSEN3 */
+ return 0;
+
+ return attr->mode;
+}
+
+static struct attribute_group nct7802_in_group = {
+ .attrs = nct7802_in_attrs,
+ .is_visible = nct7802_in_is_visible,
+};
+
+static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0x10);
+static SENSOR_DEVICE_ATTR_2(fan1_min, S_IRUGO | S_IWUSR, show_fan_min,
+ store_fan_min, 0x49, 0x4c);
+static SENSOR_DEVICE_ATTR_2(fan1_alarm, S_IRUGO, show_alarm, NULL, 0x1a, 0);
+static SENSOR_DEVICE_ATTR_2(fan1_beep, S_IRUGO | S_IWUSR, show_beep, store_beep,
+ 0x5b, 0);
+static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 0x11);
+static SENSOR_DEVICE_ATTR_2(fan2_min, S_IRUGO | S_IWUSR, show_fan_min,
+ store_fan_min, 0x4a, 0x4d);
+static SENSOR_DEVICE_ATTR_2(fan2_alarm, S_IRUGO, show_alarm, NULL, 0x1a, 1);
+static SENSOR_DEVICE_ATTR_2(fan2_beep, S_IRUGO | S_IWUSR, show_beep, store_beep,
+ 0x5b, 1);
+static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 0x12);
+static SENSOR_DEVICE_ATTR_2(fan3_min, S_IRUGO | S_IWUSR, show_fan_min,
+ store_fan_min, 0x4b, 0x4e);
+static SENSOR_DEVICE_ATTR_2(fan3_alarm, S_IRUGO, show_alarm, NULL, 0x1a, 2);
+static SENSOR_DEVICE_ATTR_2(fan3_beep, S_IRUGO | S_IWUSR, show_beep, store_beep,
+ 0x5b, 2);
+
+static struct attribute *nct7802_fan_attrs[] = {
+ &sensor_dev_attr_fan1_input.dev_attr.attr,
+ &sensor_dev_attr_fan1_min.dev_attr.attr,
+ &sensor_dev_attr_fan1_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan1_beep.dev_attr.attr,
+ &sensor_dev_attr_fan2_input.dev_attr.attr,
+ &sensor_dev_attr_fan2_min.dev_attr.attr,
+ &sensor_dev_attr_fan2_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan2_beep.dev_attr.attr,
+ &sensor_dev_attr_fan3_input.dev_attr.attr,
+ &sensor_dev_attr_fan3_min.dev_attr.attr,
+ &sensor_dev_attr_fan3_alarm.dev_attr.attr,
+ &sensor_dev_attr_fan3_beep.dev_attr.attr,
+
+ NULL
+};
+
+static umode_t nct7802_fan_is_visible(struct kobject *kobj,
+ struct attribute *attr, int index)
+{
+ struct device *dev = container_of(kobj, struct device, kobj);
+ struct nct7802_data *data = dev_get_drvdata(dev);
+ int fan = index / 4; /* 4 attributes per fan */
+ unsigned int reg;
+ int err;
+
+ err = regmap_read(data->regmap, REG_FAN_ENABLE, ®);
+ if (err < 0 || !(reg & (1 << fan)))
+ return 0;
+
+ return attr->mode;
+}
+
+static struct attribute_group nct7802_fan_group = {
+ .attrs = nct7802_fan_attrs,
+ .is_visible = nct7802_fan_is_visible,
+};
+
+static const struct attribute_group *nct7802_groups[] = {
+ &nct7802_temp_group,
+ &nct7802_in_group,
+ &nct7802_fan_group,
+ NULL
+};
+
+static int nct7802_detect(struct i2c_client *client,
+ struct i2c_board_info *info)
+{
+ int reg;
+
+ /*
+ * Chip identification registers are only available in bank 0,
+ * so only attempt chip detection if bank 0 is selected
+ */
+ reg = i2c_smbus_read_byte_data(client, REG_BANK);
+ if (reg != 0x00)
+ return -ENODEV;
+
+ reg = i2c_smbus_read_byte_data(client, REG_VENDOR_ID);
+ if (reg != 0x50)
+ return -ENODEV;
+
+ reg = i2c_smbus_read_byte_data(client, REG_CHIP_ID);
+ if (reg != 0xc3)
+ return -ENODEV;
+
+ reg = i2c_smbus_read_byte_data(client, REG_VERSION_ID);
+ if (reg < 0 || (reg & 0xf0) != 0x20)
+ return -ENODEV;
+
+ /* Also validate lower bits of voltage and temperature registers */
+ reg = i2c_smbus_read_byte_data(client, REG_TEMP_LSB);
+ if (reg < 0 || (reg & 0x1f))
+ return -ENODEV;
+
+ reg = i2c_smbus_read_byte_data(client, REG_TEMP_PECI_LSB);
+ if (reg < 0 || (reg & 0x3f))
+ return -ENODEV;
+
+ reg = i2c_smbus_read_byte_data(client, REG_VOLTAGE_LOW);
+ if (reg < 0 || (reg & 0x3f))
+ return -ENODEV;
+
+ strlcpy(info->type, "nct7802", I2C_NAME_SIZE);
+ return 0;
+}
+
+static bool nct7802_regmap_is_volatile(struct device *dev, unsigned int reg)
+{
+ return reg != REG_BANK && reg <= 0x20;
+}
+
+static struct regmap_config nct7802_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .cache_type = REGCACHE_RBTREE,
+ .volatile_reg = nct7802_regmap_is_volatile,
+};
+
+static int nct7802_init_chip(struct nct7802_data *data)
+{
+ int err;
+
+ /* Enable ADC */
+ err = regmap_update_bits(data->regmap, REG_START, 0x01, 0x01);
+ if (err)
+ return err;
+
+ /* Enable local temperature sensor */
+ err = regmap_update_bits(data->regmap, REG_MODE, 0x40, 0x40);
+ if (err)
+ return err;
+
+ /* Enable Vcore and VCC voltage monitoring */
+ return regmap_update_bits(data->regmap, REG_VMON_ENABLE, 0x03, 0x03);
+}
+
+static int nct7802_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct nct7802_data *data;
+ struct device *hwmon_dev;
+ int ret;
+
+ data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
+ if (data == NULL)
+ return -ENOMEM;
+
+ data->regmap = devm_regmap_init_i2c(client, &nct7802_regmap_config);
+ if (IS_ERR(data->regmap))
+ return PTR_ERR(data->regmap);
+
+ mutex_init(&data->access_lock);
+
+ ret = nct7802_init_chip(data);
+ if (ret < 0)
+ return ret;
+
+ hwmon_dev = devm_hwmon_device_register_with_groups(dev, client->name,
+ data,
+ nct7802_groups);
+ return PTR_ERR_OR_ZERO(hwmon_dev);
+}
+
+static const unsigned short nct7802_address_list[] = {
+ 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f, I2C_CLIENT_END
+};
+
+static const struct i2c_device_id nct7802_idtable[] = {
+ { "nct7802", 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, nct7802_idtable);
+
+static struct i2c_driver nct7802_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = DRVNAME,
+ },
+ .detect = nct7802_detect,
+ .probe = nct7802_probe,
+ .id_table = nct7802_idtable,
+ .address_list = nct7802_address_list,
+};
+
+module_i2c_driver(nct7802_driver);
+
+MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
+MODULE_DESCRIPTION("NCT7802Y Hardware Monitoring Driver");
+MODULE_LICENSE("GPL v2");
be called lm25066.
config SENSORS_LTC2978
- tristate "Linear Technologies LTC2974, LTC2978, LTC3880, and LTC3883"
+ tristate "Linear Technologies LTC2978 and compatibles"
default n
help
If you say yes here you get hardware monitoring support for Linear
- Technology LTC2974, LTC2978, LTC3880, and LTC3883.
+ Technology LTC2974, LTC2977, LTC2978, LTC3880, LTC3883, and LTM4676.
This driver can also be built as a module. If so, the module will
be called ltc2978.
+config SENSORS_LTC2978_REGULATOR
+ boolean "Regulator support for LTC2978 and compatibles"
+ depends on SENSORS_LTC2978 && REGULATOR
+ help
+ If you say yes here you get regulator support for Linear
+ Technology LTC2974, LTC2977, LTC2978, LTC3880, LTC3883, and LTM4676.
+
config SENSORS_MAX16064
tristate "Maxim MAX16064"
default n
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/i2c.h>
+#include <linux/regulator/driver.h>
#include "pmbus.h"
enum chips { ltc2974, ltc2977, ltc2978, ltc3880, ltc3883, ltm4676 };
};
MODULE_DEVICE_TABLE(i2c, ltc2978_id);
+#if IS_ENABLED(CONFIG_SENSORS_LTC2978_REGULATOR)
+static const struct regulator_desc ltc2978_reg_desc[] = {
+ PMBUS_REGULATOR("vout", 0),
+ PMBUS_REGULATOR("vout", 1),
+ PMBUS_REGULATOR("vout", 2),
+ PMBUS_REGULATOR("vout", 3),
+ PMBUS_REGULATOR("vout", 4),
+ PMBUS_REGULATOR("vout", 5),
+ PMBUS_REGULATOR("vout", 6),
+ PMBUS_REGULATOR("vout", 7),
+};
+#endif /* CONFIG_SENSORS_LTC2978_REGULATOR */
+
static int ltc2978_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
default:
return -ENODEV;
}
+
+#if IS_ENABLED(CONFIG_SENSORS_LTC2978_REGULATOR)
+ info->num_regulators = info->pages;
+ info->reg_desc = ltc2978_reg_desc;
+ if (info->num_regulators > ARRAY_SIZE(ltc2978_reg_desc)) {
+ dev_err(&client->dev, "num_regulators too large!");
+ info->num_regulators = ARRAY_SIZE(ltc2978_reg_desc);
+ }
+#endif
+
return pmbus_do_probe(client, id, info);
}
-/* This is the driver that will be inserted */
+#ifdef CONFIG_OF
+static const struct of_device_id ltc2978_of_match[] = {
+ { .compatible = "lltc,ltc2974" },
+ { .compatible = "lltc,ltc2977" },
+ { .compatible = "lltc,ltc2978" },
+ { .compatible = "lltc,ltc3880" },
+ { .compatible = "lltc,ltc3883" },
+ { .compatible = "lltc,ltm4676" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ltc2978_of_match);
+#endif
+
static struct i2c_driver ltc2978_driver = {
.driver = {
.name = "ltc2978",
+ .of_match_table = of_match_ptr(ltc2978_of_match),
},
.probe = ltc2978_probe,
.remove = pmbus_do_remove,
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
+#include <linux/regulator/driver.h>
+
#ifndef PMBUS_H
#define PMBUS_H
#define PMBUS_VIRT_VMON_OV_FAULT_LIMIT (PMBUS_VIRT_BASE + 34)
#define PMBUS_VIRT_STATUS_VMON (PMBUS_VIRT_BASE + 35)
+/*
+ * OPERATION
+ */
+#define PB_OPERATION_CONTROL_ON (1<<7)
+
/*
* CAPABILITY
*/
*/
int (*identify)(struct i2c_client *client,
struct pmbus_driver_info *info);
+
+ /* Regulator functionality, if supported by this chip driver. */
+ int num_regulators;
+ const struct regulator_desc *reg_desc;
};
+/* Regulator ops */
+
+extern struct regulator_ops pmbus_regulator_ops;
+
+/* Macro for filling in array of struct regulator_desc */
+#define PMBUS_REGULATOR(_name, _id) \
+ [_id] = { \
+ .name = (_name # _id), \
+ .id = (_id), \
+ .of_match = of_match_ptr(_name # _id), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .ops = &pmbus_regulator_ops, \
+ .owner = THIS_MODULE, \
+ }
+
/* Function declarations */
void pmbus_clear_cache(struct i2c_client *client);
int pmbus_write_word_data(struct i2c_client *client, u8 page, u8 reg, u16 word);
int pmbus_read_byte_data(struct i2c_client *client, int page, u8 reg);
int pmbus_write_byte(struct i2c_client *client, int page, u8 value);
+int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg,
+ u8 value);
+int pmbus_update_byte_data(struct i2c_client *client, int page, u8 reg,
+ u8 mask, u8 value);
void pmbus_clear_faults(struct i2c_client *client);
bool pmbus_check_byte_register(struct i2c_client *client, int page, int reg);
bool pmbus_check_word_register(struct i2c_client *client, int page, int reg);
#include <linux/hwmon-sysfs.h>
#include <linux/jiffies.h>
#include <linux/i2c/pmbus.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
#include "pmbus.h"
/*
}
EXPORT_SYMBOL_GPL(pmbus_read_byte_data);
+int pmbus_write_byte_data(struct i2c_client *client, int page, u8 reg, u8 value)
+{
+ int rv;
+
+ rv = pmbus_set_page(client, page);
+ if (rv < 0)
+ return rv;
+
+ return i2c_smbus_write_byte_data(client, reg, value);
+}
+EXPORT_SYMBOL_GPL(pmbus_write_byte_data);
+
+int pmbus_update_byte_data(struct i2c_client *client, int page, u8 reg,
+ u8 mask, u8 value)
+{
+ unsigned int tmp;
+ int rv;
+
+ rv = pmbus_read_byte_data(client, page, reg);
+ if (rv < 0)
+ return rv;
+
+ tmp = (rv & ~mask) | (value & mask);
+
+ if (tmp != rv)
+ rv = pmbus_write_byte_data(client, page, reg, tmp);
+
+ return rv;
+}
+EXPORT_SYMBOL_GPL(pmbus_update_byte_data);
+
/*
* _pmbus_read_byte_data() is similar to pmbus_read_byte_data(), but checks if
* a device specific mapping function exists and calls it if necessary.
return 0;
}
+#if IS_ENABLED(CONFIG_REGULATOR)
+static int pmbus_regulator_is_enabled(struct regulator_dev *rdev)
+{
+ struct device *dev = rdev_get_dev(rdev);
+ struct i2c_client *client = to_i2c_client(dev->parent);
+ u8 page = rdev_get_id(rdev);
+ int ret;
+
+ ret = pmbus_read_byte_data(client, page, PMBUS_OPERATION);
+ if (ret < 0)
+ return ret;
+
+ return !!(ret & PB_OPERATION_CONTROL_ON);
+}
+
+static int _pmbus_regulator_on_off(struct regulator_dev *rdev, bool enable)
+{
+ struct device *dev = rdev_get_dev(rdev);
+ struct i2c_client *client = to_i2c_client(dev->parent);
+ u8 page = rdev_get_id(rdev);
+
+ return pmbus_update_byte_data(client, page, PMBUS_OPERATION,
+ PB_OPERATION_CONTROL_ON,
+ enable ? PB_OPERATION_CONTROL_ON : 0);
+}
+
+static int pmbus_regulator_enable(struct regulator_dev *rdev)
+{
+ return _pmbus_regulator_on_off(rdev, 1);
+}
+
+static int pmbus_regulator_disable(struct regulator_dev *rdev)
+{
+ return _pmbus_regulator_on_off(rdev, 0);
+}
+
+struct regulator_ops pmbus_regulator_ops = {
+ .enable = pmbus_regulator_enable,
+ .disable = pmbus_regulator_disable,
+ .is_enabled = pmbus_regulator_is_enabled,
+};
+EXPORT_SYMBOL_GPL(pmbus_regulator_ops);
+
+static int pmbus_regulator_register(struct pmbus_data *data)
+{
+ struct device *dev = data->dev;
+ const struct pmbus_driver_info *info = data->info;
+ const struct pmbus_platform_data *pdata = dev_get_platdata(dev);
+ struct regulator_dev *rdev;
+ int i;
+
+ for (i = 0; i < info->num_regulators; i++) {
+ struct regulator_config config = { };
+
+ config.dev = dev;
+ config.driver_data = data;
+
+ if (pdata && pdata->reg_init_data)
+ config.init_data = &pdata->reg_init_data[i];
+
+ rdev = devm_regulator_register(dev, &info->reg_desc[i],
+ &config);
+ if (IS_ERR(rdev)) {
+ dev_err(dev, "Failed to register %s regulator\n",
+ info->reg_desc[i].name);
+ return PTR_ERR(rdev);
+ }
+ }
+
+ return 0;
+}
+#else
+static int pmbus_regulator_register(struct pmbus_data *data)
+{
+ return 0;
+}
+#endif
+
int pmbus_do_probe(struct i2c_client *client, const struct i2c_device_id *id,
struct pmbus_driver_info *info)
{
dev_err(dev, "Failed to register hwmon device\n");
goto out_kfree;
}
+
+ ret = pmbus_regulator_register(data);
+ if (ret)
+ goto out_unregister;
+
return 0;
+out_unregister:
+ hwmon_device_unregister(data->hwmon_dev);
out_kfree:
kfree(data->group.attrs);
return ret;
static int pwm_fan_resume(struct device *dev)
{
struct pwm_fan_ctx *ctx = dev_get_drvdata(dev);
+ unsigned long duty;
+ int ret;
- if (ctx->pwm_value)
- return pwm_enable(ctx->pwm);
- return 0;
+ if (ctx->pwm_value == 0)
+ return 0;
+
+ duty = DIV_ROUND_UP(ctx->pwm_value * (ctx->pwm->period - 1), MAX_PWM);
+ ret = pwm_config(ctx->pwm, duty, ctx->pwm->period);
+ if (ret)
+ return ret;
+ return pwm_enable(ctx->pwm);
}
#endif
#include <linux/sysfs.h>
/* Addresses to scan */
-static const unsigned short normal_i2c[] = { 0x4c, 0x4d, 0x4e, I2C_CLIENT_END };
+static const unsigned short normal_i2c[] = { 0x37, 0x48, 0x49, 0x4a, 0x4c, 0x4d,
+ 0x4e, 0x4f, I2C_CLIENT_END };
-enum chips { tmp401, tmp411, tmp431, tmp432 };
+enum chips { tmp401, tmp411, tmp431, tmp432, tmp435 };
/*
* The TMP401 registers, note some registers have different addresses for
#define TMP411C_DEVICE_ID 0x10
#define TMP431_DEVICE_ID 0x31
#define TMP432_DEVICE_ID 0x32
+#define TMP435_DEVICE_ID 0x35
/*
* Driver data (common to all clients)
{ "tmp411", tmp411 },
{ "tmp431", tmp431 },
{ "tmp432", tmp432 },
+ { "tmp435", tmp435 },
{ }
};
MODULE_DEVICE_TABLE(i2c, tmp401_id);
* Begin non sysfs callback code (aka Real code)
*/
-static void tmp401_init_client(struct tmp401_data *data,
- struct i2c_client *client)
+static int tmp401_init_client(struct tmp401_data *data,
+ struct i2c_client *client)
{
- int config, config_orig;
+ int config, config_orig, status = 0;
/* Set the conversion rate to 2 Hz */
i2c_smbus_write_byte_data(client, TMP401_CONVERSION_RATE_WRITE, 5);
/* Start conversions (disable shutdown if necessary) */
config = i2c_smbus_read_byte_data(client, TMP401_CONFIG_READ);
- if (config < 0) {
- dev_warn(&client->dev, "Initialization failed!\n");
- return;
- }
+ if (config < 0)
+ return config;
config_orig = config;
config &= ~TMP401_CONFIG_SHUTDOWN;
if (config != config_orig)
- i2c_smbus_write_byte_data(client, TMP401_CONFIG_WRITE, config);
+ status = i2c_smbus_write_byte_data(client,
+ TMP401_CONFIG_WRITE,
+ config);
+
+ return status;
}
static int tmp401_detect(struct i2c_client *client,
kind = tmp411;
break;
case TMP431_DEVICE_ID:
- if (client->addr == 0x4e)
+ if (client->addr != 0x4c && client->addr != 0x4d)
return -ENODEV;
kind = tmp431;
break;
case TMP432_DEVICE_ID:
- if (client->addr == 0x4e)
+ if (client->addr != 0x4c && client->addr != 0x4d)
return -ENODEV;
kind = tmp432;
break;
+ case TMP435_DEVICE_ID:
+ kind = tmp435;
+ break;
default:
return -ENODEV;
}
static int tmp401_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
- const char *names[] = { "TMP401", "TMP411", "TMP431", "TMP432" };
+ static const char * const names[] = {
+ "TMP401", "TMP411", "TMP431", "TMP432", "TMP435"
+ };
struct device *dev = &client->dev;
struct device *hwmon_dev;
struct tmp401_data *data;
- int groups = 0;
+ int groups = 0, status;
data = devm_kzalloc(dev, sizeof(struct tmp401_data), GFP_KERNEL);
if (!data)
data->kind = id->driver_data;
/* Initialize the TMP401 chip */
- tmp401_init_client(data, client);
+ status = tmp401_init_client(data, client);
+ if (status < 0)
+ return status;
/* Register sysfs hooks */
data->groups[groups++] = &tmp401_group;
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- MA 02110-1301 USA.
* ------------------------------------------------------------------------- */
/* With some changes from Frodo Looijaard <frodol@dds.nl>, Kyösti Mälkki
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA.
*/
#include <linux/kernel.h>
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA.
- *
* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and
* Frodo Looijaard <frodol@dds.nl>, and also from Martin Bailey
* <mbailey@littlefeet-inc.com>
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- MA 02110-1301 USA. */
+ GNU General Public License for more details. */
/* -------------------------------------------------------------------- */
/* With some changes from Frodo Looijaard <frodol@dds.nl> */
This driver can also be built as a module. If so, the module
will be called i2c-diolan-u2c.
+config I2C_DLN2
+ tristate "Diolan DLN-2 USB I2C adapter"
+ depends on MFD_DLN2
+ help
+ If you say yes to this option, support will be included for Diolan
+ DLN2, a USB to I2C interface.
+
+ This driver can also be built as a module. If so, the module
+ will be called i2c-dln2.
+
config I2C_PARPORT
tristate "Parallel port adapter"
depends on PARPORT
# External I2C/SMBus adapter drivers
obj-$(CONFIG_I2C_DIOLAN_U2C) += i2c-diolan-u2c.o
+obj-$(CONFIG_I2C_DLN2) += i2c-dln2.o
obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
obj-$(CONFIG_I2C_ROBOTFUZZ_OSIF) += i2c-robotfuzz-osif.o
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
}
}
- ret = wait_for_completion_io_timeout(&dev->cmd_complete,
+ ret = wait_for_completion_timeout(&dev->cmd_complete,
dev->adapter.timeout);
if (ret == 0) {
dev_err(dev->dev, "controller timed out\n");
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/delay.h>
#define CDNS_I2C_DIVA_MAX 4
#define CDNS_I2C_DIVB_MAX 64
+#define CDNS_I2C_TIMEOUT_MAX 0xFF
+
#define cdns_i2c_readreg(offset) readl_relaxed(id->membase + offset)
#define cdns_i2c_writereg(val, offset) writel_relaxed(val, id->membase + offset)
goto err_clk_dis;
}
+ /*
+ * Cadence I2C controller has a bug wherein it generates
+ * invalid read transaction after HW timeout in master receiver mode.
+ * HW timeout is not used by this driver and the interrupt is disabled.
+ * But the feature itself cannot be disabled. Hence maximum value
+ * is written to this register to reduce the chances of error.
+ */
+ cdns_i2c_writereg(CDNS_I2C_TIMEOUT_MAX, CDNS_I2C_TIME_OUT_OFFSET);
+
dev_info(&pdev->dev, "%u kHz mmio %08lx irq %d\n",
id->i2c_clk / 1000, (unsigned long)r_mem->start, id->irq);
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*
*/
if (dev->cmd_err & DAVINCI_I2C_STR_NACK) {
if (msg->flags & I2C_M_IGNORE_NAK)
return msg->len;
- if (stop) {
- w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
- w |= DAVINCI_I2C_MDR_STP;
- davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
- }
+ w = davinci_i2c_read_reg(dev, DAVINCI_I2C_MDR_REG);
+ w |= DAVINCI_I2C_MDR_STP;
+ davinci_i2c_write_reg(dev, DAVINCI_I2C_MDR_REG, w);
return -EREMOTEIO;
}
return -EIO;
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*
*/
}
/* Configure Tx/Rx FIFO threshold levels */
- dw_writel(dev, dev->tx_fifo_depth - 1, DW_IC_TX_TL);
+ dw_writel(dev, dev->tx_fifo_depth / 2, DW_IC_TX_TL);
dw_writel(dev, 0, DW_IC_RX_TL);
/* configure the i2c master */
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*
*/
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*
*/
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ----------------------------------------------------------------------------
*
*/
--- /dev/null
+/*
+ * Driver for the Diolan DLN-2 USB-I2C adapter
+ *
+ * Copyright (c) 2014 Intel Corporation
+ *
+ * Derived from:
+ * i2c-diolan-u2c.c
+ * Copyright (c) 2010-2011 Ericsson AB
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/dln2.h>
+
+#define DLN2_I2C_MODULE_ID 0x03
+#define DLN2_I2C_CMD(cmd) DLN2_CMD(cmd, DLN2_I2C_MODULE_ID)
+
+/* I2C commands */
+#define DLN2_I2C_GET_PORT_COUNT DLN2_I2C_CMD(0x00)
+#define DLN2_I2C_ENABLE DLN2_I2C_CMD(0x01)
+#define DLN2_I2C_DISABLE DLN2_I2C_CMD(0x02)
+#define DLN2_I2C_IS_ENABLED DLN2_I2C_CMD(0x03)
+#define DLN2_I2C_WRITE DLN2_I2C_CMD(0x06)
+#define DLN2_I2C_READ DLN2_I2C_CMD(0x07)
+#define DLN2_I2C_SCAN_DEVICES DLN2_I2C_CMD(0x08)
+#define DLN2_I2C_PULLUP_ENABLE DLN2_I2C_CMD(0x09)
+#define DLN2_I2C_PULLUP_DISABLE DLN2_I2C_CMD(0x0A)
+#define DLN2_I2C_PULLUP_IS_ENABLED DLN2_I2C_CMD(0x0B)
+#define DLN2_I2C_TRANSFER DLN2_I2C_CMD(0x0C)
+#define DLN2_I2C_SET_MAX_REPLY_COUNT DLN2_I2C_CMD(0x0D)
+#define DLN2_I2C_GET_MAX_REPLY_COUNT DLN2_I2C_CMD(0x0E)
+
+#define DLN2_I2C_MAX_XFER_SIZE 256
+#define DLN2_I2C_BUF_SIZE (DLN2_I2C_MAX_XFER_SIZE + 16)
+
+struct dln2_i2c {
+ struct platform_device *pdev;
+ struct i2c_adapter adapter;
+ u8 port;
+ /*
+ * Buffer to hold the packet for read or write transfers. One is enough
+ * since we can't have multiple transfers in parallel on the i2c bus.
+ */
+ void *buf;
+};
+
+static int dln2_i2c_enable(struct dln2_i2c *dln2, bool enable)
+{
+ u16 cmd;
+ struct {
+ u8 port;
+ } tx;
+
+ tx.port = dln2->port;
+
+ if (enable)
+ cmd = DLN2_I2C_ENABLE;
+ else
+ cmd = DLN2_I2C_DISABLE;
+
+ return dln2_transfer_tx(dln2->pdev, cmd, &tx, sizeof(tx));
+}
+
+static int dln2_i2c_write(struct dln2_i2c *dln2, u8 addr,
+ u8 *data, u16 data_len)
+{
+ int ret;
+ struct {
+ u8 port;
+ u8 addr;
+ u8 mem_addr_len;
+ __le32 mem_addr;
+ __le16 buf_len;
+ u8 buf[DLN2_I2C_MAX_XFER_SIZE];
+ } __packed *tx = dln2->buf;
+ unsigned len;
+
+ BUILD_BUG_ON(sizeof(*tx) > DLN2_I2C_BUF_SIZE);
+
+ tx->port = dln2->port;
+ tx->addr = addr;
+ tx->mem_addr_len = 0;
+ tx->mem_addr = 0;
+ tx->buf_len = cpu_to_le16(data_len);
+ memcpy(tx->buf, data, data_len);
+
+ len = sizeof(*tx) + data_len - DLN2_I2C_MAX_XFER_SIZE;
+ ret = dln2_transfer_tx(dln2->pdev, DLN2_I2C_WRITE, tx, len);
+ if (ret < 0)
+ return ret;
+
+ return data_len;
+}
+
+static int dln2_i2c_read(struct dln2_i2c *dln2, u16 addr, u8 *data,
+ u16 data_len)
+{
+ int ret;
+ struct {
+ u8 port;
+ u8 addr;
+ u8 mem_addr_len;
+ __le32 mem_addr;
+ __le16 buf_len;
+ } __packed tx;
+ struct {
+ __le16 buf_len;
+ u8 buf[DLN2_I2C_MAX_XFER_SIZE];
+ } __packed *rx = dln2->buf;
+ unsigned rx_len = sizeof(*rx);
+
+ BUILD_BUG_ON(sizeof(*rx) > DLN2_I2C_BUF_SIZE);
+
+ tx.port = dln2->port;
+ tx.addr = addr;
+ tx.mem_addr_len = 0;
+ tx.mem_addr = 0;
+ tx.buf_len = cpu_to_le16(data_len);
+
+ ret = dln2_transfer(dln2->pdev, DLN2_I2C_READ, &tx, sizeof(tx),
+ rx, &rx_len);
+ if (ret < 0)
+ return ret;
+ if (rx_len < sizeof(rx->buf_len) + data_len)
+ return -EPROTO;
+ if (le16_to_cpu(rx->buf_len) != data_len)
+ return -EPROTO;
+
+ memcpy(data, rx->buf, data_len);
+
+ return data_len;
+}
+
+static int dln2_i2c_xfer(struct i2c_adapter *adapter,
+ struct i2c_msg *msgs, int num)
+{
+ struct dln2_i2c *dln2 = i2c_get_adapdata(adapter);
+ struct i2c_msg *pmsg;
+ struct device *dev = &dln2->adapter.dev;
+ int i;
+
+ for (i = 0; i < num; i++) {
+ int ret;
+
+ pmsg = &msgs[i];
+
+ if (pmsg->len > DLN2_I2C_MAX_XFER_SIZE) {
+ dev_warn(dev, "maximum transfer size exceeded\n");
+ return -EOPNOTSUPP;
+ }
+
+ if (pmsg->flags & I2C_M_RD) {
+ ret = dln2_i2c_read(dln2, pmsg->addr, pmsg->buf,
+ pmsg->len);
+ if (ret < 0)
+ return ret;
+
+ pmsg->len = ret;
+ } else {
+ ret = dln2_i2c_write(dln2, pmsg->addr, pmsg->buf,
+ pmsg->len);
+ if (ret != pmsg->len)
+ return -EPROTO;
+ }
+ }
+
+ return num;
+}
+
+static u32 dln2_i2c_func(struct i2c_adapter *a)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_BLOCK_PROC_CALL |
+ I2C_FUNC_SMBUS_I2C_BLOCK;
+}
+
+static const struct i2c_algorithm dln2_i2c_usb_algorithm = {
+ .master_xfer = dln2_i2c_xfer,
+ .functionality = dln2_i2c_func,
+};
+
+static int dln2_i2c_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct dln2_i2c *dln2;
+ struct device *dev = &pdev->dev;
+ struct dln2_platform_data *pdata = dev_get_platdata(&pdev->dev);
+
+ dln2 = devm_kzalloc(dev, sizeof(*dln2), GFP_KERNEL);
+ if (!dln2)
+ return -ENOMEM;
+
+ dln2->buf = devm_kmalloc(dev, DLN2_I2C_BUF_SIZE, GFP_KERNEL);
+ if (!dln2->buf)
+ return -ENOMEM;
+
+ dln2->pdev = pdev;
+ dln2->port = pdata->port;
+
+ /* setup i2c adapter description */
+ dln2->adapter.owner = THIS_MODULE;
+ dln2->adapter.class = I2C_CLASS_HWMON;
+ dln2->adapter.algo = &dln2_i2c_usb_algorithm;
+ dln2->adapter.dev.parent = dev;
+ i2c_set_adapdata(&dln2->adapter, dln2);
+ snprintf(dln2->adapter.name, sizeof(dln2->adapter.name), "%s-%s-%d",
+ "dln2-i2c", dev_name(pdev->dev.parent), dln2->port);
+
+ platform_set_drvdata(pdev, dln2);
+
+ /* initialize the i2c interface */
+ ret = dln2_i2c_enable(dln2, true);
+ if (ret < 0) {
+ dev_err(dev, "failed to initialize adapter: %d\n", ret);
+ return ret;
+ }
+
+ /* and finally attach to i2c layer */
+ ret = i2c_add_adapter(&dln2->adapter);
+ if (ret < 0) {
+ dev_err(dev, "failed to add I2C adapter: %d\n", ret);
+ goto out_disable;
+ }
+
+ return 0;
+
+out_disable:
+ dln2_i2c_enable(dln2, false);
+
+ return ret;
+}
+
+static int dln2_i2c_remove(struct platform_device *pdev)
+{
+ struct dln2_i2c *dln2 = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(&dln2->adapter);
+ dln2_i2c_enable(dln2, false);
+
+ return 0;
+}
+
+static struct platform_driver dln2_i2c_driver = {
+ .driver.name = "dln2-i2c",
+ .probe = dln2_i2c_probe,
+ .remove = dln2_i2c_remove,
+};
+
+module_platform_driver(dln2_i2c_driver);
+
+MODULE_AUTHOR("Laurentiu Palcu <laurentiu.palcu@intel.com>");
+MODULE_DESCRIPTION("Driver for the Diolan DLN2 I2C master interface");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:dln2-i2c");
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/module.h>
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+ GNU General Public License for more details. */
/* ------------------------------------------------------------------------- */
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
- * USA.
- *
* Author:
* Darius Augulis, Teltonika Inc.
*
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
+ GNU General Public License for more details. */
/* ------------------------------------------------------------------------- */
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
if (stat & OMAP_I2C_STAT_NACK) {
err |= OMAP_I2C_STAT_NACK;
omap_i2c_ack_stat(dev, OMAP_I2C_STAT_NACK);
- break;
}
if (stat & OMAP_I2C_STAT_AL) {
dev_err(dev->dev, "Arbitration lost\n");
err |= OMAP_I2C_STAT_AL;
omap_i2c_ack_stat(dev, OMAP_I2C_STAT_AL);
- break;
}
/*
if (dev->fifo_size)
num_bytes = dev->buf_len;
- omap_i2c_receive_data(dev, num_bytes, true);
-
- if (dev->errata & I2C_OMAP_ERRATA_I207)
+ if (dev->errata & I2C_OMAP_ERRATA_I207) {
i2c_omap_errata_i207(dev, stat);
+ num_bytes = (omap_i2c_read_reg(dev,
+ OMAP_I2C_BUFSTAT_REG) >> 8) & 0x3F;
+ }
+ omap_i2c_receive_data(dev, num_bytes, true);
omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RDR);
continue;
}
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ------------------------------------------------------------------------ */
#include <linux/kernel.h>
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ------------------------------------------------------------------------ */
#include <linux/kernel.h>
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
* ------------------------------------------------------------------------ */
#define PORT_DATA 0
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/module.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
* ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-
*/
#include <linux/module.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include <linux/kernel.h>
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/* Note: we assume there can only be one SIS5595 with one SMBus interface */
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/delay.h>
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/kernel.h>
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
*
* This code was implemented by Mocean Laboratories AB when porting linux
* to the automotive development board Russellville. The copyright holder
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA.
*/
#include <linux/kernel.h>
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- MA 02110-1301 USA. */
+ GNU General Public License for more details. */
/* ------------------------------------------------------------------------- */
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>.
status = driver->remove(client);
}
+ if (dev->of_node)
+ irq_dispose_mapping(client->irq);
+
dev_pm_domain_detach(&client->dev, true);
return status;
}
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA.
*/
#include <linux/rwsem.h>
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- MA 02110-1301 USA.
*/
/* Note that this is a complete rewrite of Simon Vogl's i2c-dev module.
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA.
*/
#include <linux/kernel.h>
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#define DEBUG 1
#define BMC150_ACCEL_REG_INT_STATUS_2 0x0B
#define BMC150_ACCEL_ANY_MOTION_MASK 0x07
+#define BMC150_ACCEL_ANY_MOTION_BIT_X BIT(0)
+#define BMC150_ACCEL_ANY_MOTION_BIT_Y BIT(1)
+#define BMC150_ACCEL_ANY_MOTION_BIT_Z BIT(2)
#define BMC150_ACCEL_ANY_MOTION_BIT_SIGN BIT(3)
#define BMC150_ACCEL_REG_PMU_LPW 0x11
#define BMC150_ACCEL_SLOPE_THRES_MASK 0xFF
/* Slope duration in terms of number of samples */
-#define BMC150_ACCEL_DEF_SLOPE_DURATION 2
+#define BMC150_ACCEL_DEF_SLOPE_DURATION 1
/* in terms of multiples of g's/LSB, based on range */
-#define BMC150_ACCEL_DEF_SLOPE_THRESHOLD 5
+#define BMC150_ACCEL_DEF_SLOPE_THRESHOLD 1
#define BMC150_ACCEL_REG_XOUT_L 0x02
if (ret < 0) {
dev_err(&data->client->dev,
"Failed: bmc150_accel_set_power_state for %d\n", on);
+ if (on)
+ pm_runtime_put_noidle(&data->client->dev);
+
return ret;
}
ret = bmc150_accel_setup_any_motion_interrupt(data, state);
if (ret < 0) {
+ bmc150_accel_set_power_state(data, false);
mutex_unlock(&data->mutex);
return ret;
}
static const struct iio_event_spec bmc150_accel_event = {
.type = IIO_EV_TYPE_ROC,
- .dir = IIO_EV_DIR_RISING | IIO_EV_DIR_FALLING,
+ .dir = IIO_EV_DIR_EITHER,
.mask_separate = BIT(IIO_EV_INFO_VALUE) |
BIT(IIO_EV_INFO_ENABLE) |
BIT(IIO_EV_INFO_PERIOD)
else
ret = bmc150_accel_setup_new_data_interrupt(data, state);
if (ret < 0) {
+ bmc150_accel_set_power_state(data, false);
mutex_unlock(&data->mutex);
return ret;
}
else
dir = IIO_EV_DIR_RISING;
- if (ret & BMC150_ACCEL_ANY_MOTION_MASK)
+ if (ret & BMC150_ACCEL_ANY_MOTION_BIT_X)
+ iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL,
+ 0,
+ IIO_MOD_X,
+ IIO_EV_TYPE_ROC,
+ dir),
+ data->timestamp);
+ if (ret & BMC150_ACCEL_ANY_MOTION_BIT_Y)
iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL,
0,
- IIO_MOD_X_OR_Y_OR_Z,
+ IIO_MOD_Y,
IIO_EV_TYPE_ROC,
- IIO_EV_DIR_EITHER),
+ dir),
+ data->timestamp);
+ if (ret & BMC150_ACCEL_ANY_MOTION_BIT_Z)
+ iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL,
+ 0,
+ IIO_MOD_Z,
+ IIO_EV_TYPE_ROC,
+ dir),
data->timestamp);
ack_intr_status:
if (!data->dready_trigger_on)
{
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
struct bmc150_accel_data *data = iio_priv(indio_dev);
+ int ret;
dev_dbg(&data->client->dev, __func__);
+ ret = bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_SUSPEND, 0);
+ if (ret < 0)
+ return -EAGAIN;
- return bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_SUSPEND, 0);
+ return 0;
}
static int bmc150_accel_runtime_resume(struct device *dev)
return ret;
}
+ ret &= ~(KXCJK1013_REG_CTRL1_BIT_GSEL0 |
+ KXCJK1013_REG_CTRL1_BIT_GSEL1);
ret |= (KXCJK1013_scale_table[range_index].gsel_0 << 3);
ret |= (KXCJK1013_scale_table[range_index].gsel_1 << 4);
static const struct iio_event_spec kxcjk1013_event = {
.type = IIO_EV_TYPE_THRESH,
- .dir = IIO_EV_DIR_RISING | IIO_EV_DIR_FALLING,
+ .dir = IIO_EV_DIR_EITHER,
.mask_separate = BIT(IIO_EV_INFO_VALUE) |
BIT(IIO_EV_INFO_ENABLE) |
BIT(IIO_EV_INFO_PERIOD)
help
Say yes here to build support for Atmel AT91 ADC.
+config AXP288_ADC
+ tristate "X-Powers AXP288 ADC driver"
+ depends on MFD_AXP20X
+ help
+ Say yes here to have support for X-Powers power management IC (PMIC) ADC
+ device. Depending on platform configuration, this general purpose ADC can
+ be used for sampling sensors such as thermal resistors.
+
config EXYNOS_ADC
tristate "Exynos ADC driver support"
depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || (OF && COMPILE_TEST)
obj-$(CONFIG_AD7887) += ad7887.o
obj-$(CONFIG_AD799X) += ad799x.o
obj-$(CONFIG_AT91_ADC) += at91_adc.o
+obj-$(CONFIG_AXP288_ADC) += axp288_adc.o
obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o
obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
obj-$(CONFIG_MAX1027) += max1027.o
--- /dev/null
+/*
+ * axp288_adc.c - X-Powers AXP288 PMIC ADC Driver
+ *
+ * Copyright (C) 2014 Intel Corporation
+ *
+ * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/regmap.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/platform_device.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/machine.h>
+#include <linux/iio/driver.h>
+
+#define AXP288_ADC_EN_MASK 0xF1
+#define AXP288_ADC_TS_PIN_GPADC 0xF2
+#define AXP288_ADC_TS_PIN_ON 0xF3
+
+enum axp288_adc_id {
+ AXP288_ADC_TS,
+ AXP288_ADC_PMIC,
+ AXP288_ADC_GP,
+ AXP288_ADC_BATT_CHRG_I,
+ AXP288_ADC_BATT_DISCHRG_I,
+ AXP288_ADC_BATT_V,
+ AXP288_ADC_NR_CHAN,
+};
+
+struct axp288_adc_info {
+ int irq;
+ struct regmap *regmap;
+};
+
+static const struct iio_chan_spec const axp288_adc_channels[] = {
+ {
+ .indexed = 1,
+ .type = IIO_TEMP,
+ .channel = 0,
+ .address = AXP288_TS_ADC_H,
+ .datasheet_name = "TS_PIN",
+ }, {
+ .indexed = 1,
+ .type = IIO_TEMP,
+ .channel = 1,
+ .address = AXP288_PMIC_ADC_H,
+ .datasheet_name = "PMIC_TEMP",
+ }, {
+ .indexed = 1,
+ .type = IIO_TEMP,
+ .channel = 2,
+ .address = AXP288_GP_ADC_H,
+ .datasheet_name = "GPADC",
+ }, {
+ .indexed = 1,
+ .type = IIO_CURRENT,
+ .channel = 3,
+ .address = AXP20X_BATT_CHRG_I_H,
+ .datasheet_name = "BATT_CHG_I",
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ }, {
+ .indexed = 1,
+ .type = IIO_CURRENT,
+ .channel = 4,
+ .address = AXP20X_BATT_DISCHRG_I_H,
+ .datasheet_name = "BATT_DISCHRG_I",
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ }, {
+ .indexed = 1,
+ .type = IIO_VOLTAGE,
+ .channel = 5,
+ .address = AXP20X_BATT_V_H,
+ .datasheet_name = "BATT_V",
+ .info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
+ },
+};
+
+#define AXP288_ADC_MAP(_adc_channel_label, _consumer_dev_name, \
+ _consumer_channel) \
+ { \
+ .adc_channel_label = _adc_channel_label, \
+ .consumer_dev_name = _consumer_dev_name, \
+ .consumer_channel = _consumer_channel, \
+ }
+
+/* for consumer drivers */
+static struct iio_map axp288_adc_default_maps[] = {
+ AXP288_ADC_MAP("TS_PIN", "axp288-batt", "axp288-batt-temp"),
+ AXP288_ADC_MAP("PMIC_TEMP", "axp288-pmic", "axp288-pmic-temp"),
+ AXP288_ADC_MAP("GPADC", "axp288-gpadc", "axp288-system-temp"),
+ AXP288_ADC_MAP("BATT_CHG_I", "axp288-chrg", "axp288-chrg-curr"),
+ AXP288_ADC_MAP("BATT_DISCHRG_I", "axp288-chrg", "axp288-chrg-d-curr"),
+ AXP288_ADC_MAP("BATT_V", "axp288-batt", "axp288-batt-volt"),
+ {},
+};
+
+static int axp288_adc_read_channel(int *val, unsigned long address,
+ struct regmap *regmap)
+{
+ u8 buf[2];
+
+ if (regmap_bulk_read(regmap, address, buf, 2))
+ return -EIO;
+ *val = (buf[0] << 4) + ((buf[1] >> 4) & 0x0F);
+
+ return IIO_VAL_INT;
+}
+
+static int axp288_adc_set_ts(struct regmap *regmap, unsigned int mode,
+ unsigned long address)
+{
+ /* channels other than GPADC do not need to switch TS pin */
+ if (address != AXP288_GP_ADC_H)
+ return 0;
+
+ return regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, mode);
+}
+
+static int axp288_adc_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val, int *val2, long mask)
+{
+ int ret;
+ struct axp288_adc_info *info = iio_priv(indio_dev);
+
+ mutex_lock(&indio_dev->mlock);
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_GPADC,
+ chan->address)) {
+ dev_err(&indio_dev->dev, "GPADC mode\n");
+ ret = -EINVAL;
+ break;
+ }
+ ret = axp288_adc_read_channel(val, chan->address, info->regmap);
+ if (axp288_adc_set_ts(info->regmap, AXP288_ADC_TS_PIN_ON,
+ chan->address))
+ dev_err(&indio_dev->dev, "TS pin restore\n");
+ break;
+ case IIO_CHAN_INFO_PROCESSED:
+ ret = axp288_adc_read_channel(val, chan->address, info->regmap);
+ break;
+ default:
+ ret = -EINVAL;
+ }
+ mutex_unlock(&indio_dev->mlock);
+
+ return ret;
+}
+
+static int axp288_adc_set_state(struct regmap *regmap)
+{
+ /* ADC should be always enabled for internal FG to function */
+ if (regmap_write(regmap, AXP288_ADC_TS_PIN_CTRL, AXP288_ADC_TS_PIN_ON))
+ return -EIO;
+
+ return regmap_write(regmap, AXP20X_ADC_EN1, AXP288_ADC_EN_MASK);
+}
+
+static const struct iio_info axp288_adc_iio_info = {
+ .read_raw = &axp288_adc_read_raw,
+ .driver_module = THIS_MODULE,
+};
+
+static int axp288_adc_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct axp288_adc_info *info;
+ struct iio_dev *indio_dev;
+ struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent);
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ info = iio_priv(indio_dev);
+ info->irq = platform_get_irq(pdev, 0);
+ if (info->irq < 0) {
+ dev_err(&pdev->dev, "no irq resource?\n");
+ return info->irq;
+ }
+ platform_set_drvdata(pdev, indio_dev);
+ info->regmap = axp20x->regmap;
+ /*
+ * Set ADC to enabled state at all time, including system suspend.
+ * otherwise internal fuel gauge functionality may be affected.
+ */
+ ret = axp288_adc_set_state(axp20x->regmap);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to enable ADC device\n");
+ return ret;
+ }
+
+ indio_dev->dev.parent = &pdev->dev;
+ indio_dev->name = pdev->name;
+ indio_dev->channels = axp288_adc_channels;
+ indio_dev->num_channels = ARRAY_SIZE(axp288_adc_channels);
+ indio_dev->info = &axp288_adc_iio_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ ret = iio_map_array_register(indio_dev, axp288_adc_default_maps);
+ if (ret < 0)
+ return ret;
+
+ ret = iio_device_register(indio_dev);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "unable to register iio device\n");
+ goto err_array_unregister;
+ }
+ return 0;
+
+err_array_unregister:
+ iio_map_array_unregister(indio_dev);
+
+ return ret;
+}
+
+static int axp288_adc_remove(struct platform_device *pdev)
+{
+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+
+ iio_device_unregister(indio_dev);
+ iio_map_array_unregister(indio_dev);
+
+ return 0;
+}
+
+static struct platform_device_id axp288_adc_id_table[] = {
+ { .name = "axp288_adc" },
+ {},
+};
+
+static struct platform_driver axp288_adc_driver = {
+ .probe = axp288_adc_probe,
+ .remove = axp288_adc_remove,
+ .id_table = axp288_adc_id_table,
+ .driver = {
+ .name = "axp288_adc",
+ },
+};
+
+MODULE_DEVICE_TABLE(platform, axp288_adc_id_table);
+
+module_platform_driver(axp288_adc_driver);
+
+MODULE_AUTHOR("Jacob Pan <jacob.jun.pan@linux.intel.com>");
+MODULE_DESCRIPTION("X-Powers AXP288 ADC Driver");
+MODULE_LICENSE("GPL");
static const struct mcb_device_id men_z188_ids[] = {
{ .device = 0xbc },
+ { }
};
MODULE_DEVICE_TABLE(mcb, men_z188_ids);
goto st_sensors_free_memory;
}
- for (i = 0; i < n * num_data_channels; i++) {
+ for (i = 0; i < n * byte_for_channel; i++) {
if (i < n)
buf[i] = rx_array[i];
else
#define BMG160_REG_INT_EN_0 0x15
#define BMG160_DATA_ENABLE_INT BIT(7)
+#define BMG160_REG_INT_EN_1 0x16
+#define BMG160_INT1_BIT_OD BIT(1)
+
#define BMG160_REG_XOUT_L 0x02
#define BMG160_AXIS_TO_REG(axis) (BMG160_REG_XOUT_L + (axis * 2))
#define BMG160_REG_INT_STATUS_2 0x0B
#define BMG160_ANY_MOTION_MASK 0x07
+#define BMG160_ANY_MOTION_BIT_X BIT(0)
+#define BMG160_ANY_MOTION_BIT_Y BIT(1)
+#define BMG160_ANY_MOTION_BIT_Z BIT(2)
#define BMG160_REG_TEMP 0x08
#define BMG160_TEMP_CENTER_VAL 23
data->slope_thres = ret;
/* Set default interrupt mode */
+ ret = i2c_smbus_read_byte_data(data->client, BMG160_REG_INT_EN_1);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "Error reading reg_int_en_1\n");
+ return ret;
+ }
+ ret &= ~BMG160_INT1_BIT_OD;
+ ret = i2c_smbus_write_byte_data(data->client,
+ BMG160_REG_INT_EN_1, ret);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "Error writing reg_int_en_1\n");
+ return ret;
+ }
+
ret = i2c_smbus_write_byte_data(data->client,
BMG160_REG_INT_RST_LATCH,
BMG160_INT_MODE_LATCH_INT |
if (ret < 0) {
dev_err(&data->client->dev,
"Failed: bmg160_set_power_state for %d\n", on);
+ if (on)
+ pm_runtime_put_noidle(&data->client->dev);
+
return ret;
}
#endif
ret = bmg160_setup_any_motion_interrupt(data, state);
if (ret < 0) {
+ bmg160_set_power_state(data, false);
mutex_unlock(&data->mutex);
return ret;
}
static const struct iio_event_spec bmg160_event = {
.type = IIO_EV_TYPE_ROC,
- .dir = IIO_EV_DIR_RISING | IIO_EV_DIR_FALLING,
+ .dir = IIO_EV_DIR_EITHER,
.mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) |
BIT(IIO_EV_INFO_ENABLE)
};
else
ret = bmg160_setup_new_data_interrupt(data, state);
if (ret < 0) {
+ bmg160_set_power_state(data, false);
mutex_unlock(&data->mutex);
return ret;
}
else
dir = IIO_EV_DIR_FALLING;
- if (ret & BMG160_ANY_MOTION_MASK)
+ if (ret & BMG160_ANY_MOTION_BIT_X)
iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ANGL_VEL,
0,
- IIO_MOD_X_OR_Y_OR_Z,
+ IIO_MOD_X,
+ IIO_EV_TYPE_ROC,
+ dir),
+ data->timestamp);
+ if (ret & BMG160_ANY_MOTION_BIT_Y)
+ iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ANGL_VEL,
+ 0,
+ IIO_MOD_Y,
+ IIO_EV_TYPE_ROC,
+ dir),
+ data->timestamp);
+ if (ret & BMG160_ANY_MOTION_BIT_Z)
+ iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ANGL_VEL,
+ 0,
+ IIO_MOD_Z,
IIO_EV_TYPE_ROC,
dir),
data->timestamp);
{
struct iio_dev *indio_dev = i2c_get_clientdata(to_i2c_client(dev));
struct bmg160_data *data = iio_priv(indio_dev);
+ int ret;
+
+ ret = bmg160_set_mode(data, BMG160_MODE_SUSPEND);
+ if (ret < 0) {
+ dev_err(&data->client->dev, "set mode failed\n");
+ return -EAGAIN;
+ }
- return bmg160_set_mode(data, BMG160_MODE_SUSPEND);
+ return 0;
}
static int bmg160_runtime_resume(struct device *dev)
return i2c_smbus_write_byte_data(to_i2c_client(dev), TSL4531_CONTROL,
TSL4531_MODE_NORMAL);
}
-#endif
static SIMPLE_DEV_PM_OPS(tsl4531_pm_ops, tsl4531_suspend, tsl4531_resume);
+#define TSL4531_PM_OPS (&tsl4531_pm_ops)
+#else
+#define TSL4531_PM_OPS NULL
+#endif
static const struct i2c_device_id tsl4531_id[] = {
{ "tsl4531", 0 },
static struct i2c_driver tsl4531_driver = {
.driver = {
.name = TSL4531_DRV_NAME,
- .pm = &tsl4531_pm_ops,
+ .pm = TSL4531_PM_OPS,
.owner = THIS_MODULE,
},
.probe = tsl4531_probe,
return -EINVAL;
}
- indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(st));
+ indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st));
if (!indio_dev)
return -ENOMEM;
err = __mlx4_ib_create_flow(qp, flow_attr, domain, type[i],
&mflow->reg_id[i]);
if (err)
- goto err_free;
+ goto err_create_flow;
i++;
}
if (i < ARRAY_SIZE(type) && flow_attr->type == IB_FLOW_ATTR_NORMAL) {
err = mlx4_ib_tunnel_steer_add(qp, flow_attr, &mflow->reg_id[i]);
if (err)
- goto err_free;
+ goto err_create_flow;
+ i++;
}
return &mflow->ibflow;
+err_create_flow:
+ while (i) {
+ (void)__mlx4_ib_destroy_flow(to_mdev(qp->device)->dev, mflow->reg_id[i]);
+ i--;
+ }
err_free:
kfree(mflow);
return ERR_PTR(err);
.module = THIS_MODULE,
.name = "iSCSI Initiator over iSER",
.queuecommand = iscsi_queuecommand,
- .change_queue_depth = iscsi_change_queue_depth,
+ .change_queue_depth = scsi_change_queue_depth,
.sg_tablesize = ISCSI_ISER_SG_TABLESIZE,
.max_sectors = 1024,
.cmd_per_lun = ISER_DEF_CMD_PER_LUN,
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "iscsi_iser",
.this_id = -1,
+ .track_queue_depth = 1,
};
static struct iscsi_transport iscsi_iser_transport = {
attr.cap.max_recv_wr = ISERT_QP_MAX_RECV_DTOS;
/*
* FIXME: Use devattr.max_sge - 2 for max_send_sge as
- * work-around for RDMA_READ..
+ * work-around for RDMA_READs with ConnectX-2.
+ *
+ * Also, still make sure to have at least two SGEs for
+ * outgoing control PDU responses.
*/
- attr.cap.max_send_sge = device->dev_attr.max_sge - 2;
+ attr.cap.max_send_sge = max(2, device->dev_attr.max_sge - 2);
isert_conn->max_sge = attr.cap.max_send_sge;
attr.cap.max_recv_sge = 1;
struct isert_cq_desc *cq_desc;
struct ib_device_attr *dev_attr;
int ret = 0, i, j;
+ int max_rx_cqe, max_tx_cqe;
dev_attr = &device->dev_attr;
ret = isert_query_device(ib_dev, dev_attr);
if (ret)
return ret;
+ max_rx_cqe = min(ISER_MAX_RX_CQ_LEN, dev_attr->max_cqe);
+ max_tx_cqe = min(ISER_MAX_TX_CQ_LEN, dev_attr->max_cqe);
+
/* asign function handlers */
if (dev_attr->device_cap_flags & IB_DEVICE_MEM_MGT_EXTENSIONS &&
dev_attr->device_cap_flags & IB_DEVICE_SIGNATURE_HANDOVER) {
isert_cq_rx_callback,
isert_cq_event_callback,
(void *)&cq_desc[i],
- ISER_MAX_RX_CQ_LEN, i);
+ max_rx_cqe, i);
if (IS_ERR(device->dev_rx_cq[i])) {
ret = PTR_ERR(device->dev_rx_cq[i]);
device->dev_rx_cq[i] = NULL;
isert_cq_tx_callback,
isert_cq_event_callback,
(void *)&cq_desc[i],
- ISER_MAX_TX_CQ_LEN, i);
+ max_tx_cqe, i);
if (IS_ERR(device->dev_tx_cq[i])) {
ret = PTR_ERR(device->dev_tx_cq[i]);
device->dev_tx_cq[i] = NULL;
complete(&isert_conn->conn_wait);
}
-static void
+static int
isert_disconnected_handler(struct rdma_cm_id *cma_id, bool disconnect)
{
- struct isert_conn *isert_conn = (struct isert_conn *)cma_id->context;
+ struct isert_conn *isert_conn;
+
+ if (!cma_id->qp) {
+ struct isert_np *isert_np = cma_id->context;
+
+ isert_np->np_cm_id = NULL;
+ return -1;
+ }
+
+ isert_conn = (struct isert_conn *)cma_id->context;
isert_conn->disconnect = disconnect;
INIT_WORK(&isert_conn->conn_logout_work, isert_disconnect_work);
schedule_work(&isert_conn->conn_logout_work);
+
+ return 0;
}
static int
switch (event->event) {
case RDMA_CM_EVENT_CONNECT_REQUEST:
ret = isert_connect_request(cma_id, event);
+ if (ret)
+ pr_err("isert_cma_handler failed RDMA_CM_EVENT: 0x%08x %d\n",
+ event->event, ret);
break;
case RDMA_CM_EVENT_ESTABLISHED:
isert_connected_handler(cma_id);
case RDMA_CM_EVENT_DEVICE_REMOVAL: /* FALLTHRU */
disconnect = true;
case RDMA_CM_EVENT_TIMEWAIT_EXIT: /* FALLTHRU */
- isert_disconnected_handler(cma_id, disconnect);
+ ret = isert_disconnected_handler(cma_id, disconnect);
break;
case RDMA_CM_EVENT_CONNECT_ERROR:
default:
break;
}
- if (ret != 0) {
- pr_err("isert_cma_handler failed RDMA_CM_EVENT: 0x%08x %d\n",
- event->event, ret);
- dump_stack();
- }
-
return ret;
}
isert_cmd->tx_desc.num_sge = 2;
}
- isert_init_send_wr(isert_conn, isert_cmd, send_wr, true);
+ isert_init_send_wr(isert_conn, isert_cmd, send_wr, false);
pr_debug("Posting SCSI Response IB_WR_SEND >>>>>>>>>>>>>>>>>>>>>>\n");
&isert_cmd->tx_desc.iscsi_header);
isert_init_tx_hdrs(isert_conn, &isert_cmd->tx_desc);
isert_init_send_wr(isert_conn, isert_cmd,
- &isert_cmd->tx_desc.send_wr, true);
+ &isert_cmd->tx_desc.send_wr, false);
isert_cmd->rdma_wr.s_send_wr.next = &isert_cmd->tx_desc.send_wr;
wr->send_wr_num += 1;
}
accept_wait:
ret = down_interruptible(&isert_np->np_sem);
- if (max_accept > 5)
+ if (ret || max_accept > 5)
return -ENODEV;
spin_lock_bh(&np->np_thread_lock);
{
struct isert_np *isert_np = (struct isert_np *)np->np_context;
- rdma_destroy_id(isert_np->np_cm_id);
+ if (isert_np->np_cm_id)
+ rdma_destroy_id(isert_np->np_cm_id);
np->np_context = NULL;
kfree(isert_np);
" if fast_io_fail_tmo has not been set. \"off\" means that"
" this functionality is disabled.");
+static unsigned ch_count;
+module_param(ch_count, uint, 0444);
+MODULE_PARM_DESC(ch_count,
+ "Number of RDMA channels to use for communication with an SRP target. Using more than one channel improves performance if the HCA supports multiple completion vectors. The default value is the minimum of four times the number of online CPU sockets and the number of completion vectors supported by the HCA.");
+
static void srp_add_one(struct ib_device *device);
static void srp_remove_one(struct ib_device *device);
-static void srp_recv_completion(struct ib_cq *cq, void *target_ptr);
-static void srp_send_completion(struct ib_cq *cq, void *target_ptr);
+static void srp_recv_completion(struct ib_cq *cq, void *ch_ptr);
+static void srp_send_completion(struct ib_cq *cq, void *ch_ptr);
static int srp_cm_handler(struct ib_cm_id *cm_id, struct ib_cm_event *event);
static struct scsi_transport_template *ib_srp_transport_template;
ret = ib_find_pkey(target->srp_host->srp_dev->dev,
target->srp_host->port,
- be16_to_cpu(target->path.pkey),
+ be16_to_cpu(target->pkey),
&attr->pkey_index);
if (ret)
goto out;
return ret;
}
-static int srp_new_cm_id(struct srp_target_port *target)
+static int srp_new_cm_id(struct srp_rdma_ch *ch)
{
+ struct srp_target_port *target = ch->target;
struct ib_cm_id *new_cm_id;
new_cm_id = ib_create_cm_id(target->srp_host->srp_dev->dev,
- srp_cm_handler, target);
+ srp_cm_handler, ch);
if (IS_ERR(new_cm_id))
return PTR_ERR(new_cm_id);
- if (target->cm_id)
- ib_destroy_cm_id(target->cm_id);
- target->cm_id = new_cm_id;
+ if (ch->cm_id)
+ ib_destroy_cm_id(ch->cm_id);
+ ch->cm_id = new_cm_id;
+ ch->path.sgid = target->sgid;
+ ch->path.dgid = target->orig_dgid;
+ ch->path.pkey = target->pkey;
+ ch->path.service_id = target->service_id;
return 0;
}
dev->max_pages_per_mr);
}
-static int srp_create_target_ib(struct srp_target_port *target)
+/**
+ * srp_destroy_qp() - destroy an RDMA queue pair
+ * @ch: SRP RDMA channel.
+ *
+ * Change a queue pair into the error state and wait until all receive
+ * completions have been processed before destroying it. This avoids that
+ * the receive completion handler can access the queue pair while it is
+ * being destroyed.
+ */
+static void srp_destroy_qp(struct srp_rdma_ch *ch)
+{
+ struct srp_target_port *target = ch->target;
+ static struct ib_qp_attr attr = { .qp_state = IB_QPS_ERR };
+ static struct ib_recv_wr wr = { .wr_id = SRP_LAST_WR_ID };
+ struct ib_recv_wr *bad_wr;
+ int ret;
+
+ /* Destroying a QP and reusing ch->done is only safe if not connected */
+ WARN_ON_ONCE(target->connected);
+
+ ret = ib_modify_qp(ch->qp, &attr, IB_QP_STATE);
+ WARN_ONCE(ret, "ib_cm_init_qp_attr() returned %d\n", ret);
+ if (ret)
+ goto out;
+
+ init_completion(&ch->done);
+ ret = ib_post_recv(ch->qp, &wr, &bad_wr);
+ WARN_ONCE(ret, "ib_post_recv() returned %d\n", ret);
+ if (ret == 0)
+ wait_for_completion(&ch->done);
+
+out:
+ ib_destroy_qp(ch->qp);
+}
+
+static int srp_create_ch_ib(struct srp_rdma_ch *ch)
{
+ struct srp_target_port *target = ch->target;
struct srp_device *dev = target->srp_host->srp_dev;
struct ib_qp_init_attr *init_attr;
struct ib_cq *recv_cq, *send_cq;
if (!init_attr)
return -ENOMEM;
- recv_cq = ib_create_cq(dev->dev, srp_recv_completion, NULL, target,
- target->queue_size, target->comp_vector);
+ /* + 1 for SRP_LAST_WR_ID */
+ recv_cq = ib_create_cq(dev->dev, srp_recv_completion, NULL, ch,
+ target->queue_size + 1, ch->comp_vector);
if (IS_ERR(recv_cq)) {
ret = PTR_ERR(recv_cq);
goto err;
}
- send_cq = ib_create_cq(dev->dev, srp_send_completion, NULL, target,
- m * target->queue_size, target->comp_vector);
+ send_cq = ib_create_cq(dev->dev, srp_send_completion, NULL, ch,
+ m * target->queue_size, ch->comp_vector);
if (IS_ERR(send_cq)) {
ret = PTR_ERR(send_cq);
goto err_recv_cq;
init_attr->event_handler = srp_qp_event;
init_attr->cap.max_send_wr = m * target->queue_size;
- init_attr->cap.max_recv_wr = target->queue_size;
+ init_attr->cap.max_recv_wr = target->queue_size + 1;
init_attr->cap.max_recv_sge = 1;
init_attr->cap.max_send_sge = 1;
init_attr->sq_sig_type = IB_SIGNAL_REQ_WR;
"FR pool allocation failed (%d)\n", ret);
goto err_qp;
}
- if (target->fr_pool)
- srp_destroy_fr_pool(target->fr_pool);
- target->fr_pool = fr_pool;
+ if (ch->fr_pool)
+ srp_destroy_fr_pool(ch->fr_pool);
+ ch->fr_pool = fr_pool;
} else if (!dev->use_fast_reg && dev->has_fmr) {
fmr_pool = srp_alloc_fmr_pool(target);
if (IS_ERR(fmr_pool)) {
"FMR pool allocation failed (%d)\n", ret);
goto err_qp;
}
- if (target->fmr_pool)
- ib_destroy_fmr_pool(target->fmr_pool);
- target->fmr_pool = fmr_pool;
+ if (ch->fmr_pool)
+ ib_destroy_fmr_pool(ch->fmr_pool);
+ ch->fmr_pool = fmr_pool;
}
- if (target->qp)
- ib_destroy_qp(target->qp);
- if (target->recv_cq)
- ib_destroy_cq(target->recv_cq);
- if (target->send_cq)
- ib_destroy_cq(target->send_cq);
+ if (ch->qp)
+ srp_destroy_qp(ch);
+ if (ch->recv_cq)
+ ib_destroy_cq(ch->recv_cq);
+ if (ch->send_cq)
+ ib_destroy_cq(ch->send_cq);
- target->qp = qp;
- target->recv_cq = recv_cq;
- target->send_cq = send_cq;
+ ch->qp = qp;
+ ch->recv_cq = recv_cq;
+ ch->send_cq = send_cq;
kfree(init_attr);
return 0;
/*
* Note: this function may be called without srp_alloc_iu_bufs() having been
- * invoked. Hence the target->[rt]x_ring checks.
+ * invoked. Hence the ch->[rt]x_ring checks.
*/
-static void srp_free_target_ib(struct srp_target_port *target)
+static void srp_free_ch_ib(struct srp_target_port *target,
+ struct srp_rdma_ch *ch)
{
struct srp_device *dev = target->srp_host->srp_dev;
int i;
+ if (!ch->target)
+ return;
+
+ if (ch->cm_id) {
+ ib_destroy_cm_id(ch->cm_id);
+ ch->cm_id = NULL;
+ }
+
+ /* If srp_new_cm_id() succeeded but srp_create_ch_ib() not, return. */
+ if (!ch->qp)
+ return;
+
if (dev->use_fast_reg) {
- if (target->fr_pool)
- srp_destroy_fr_pool(target->fr_pool);
+ if (ch->fr_pool)
+ srp_destroy_fr_pool(ch->fr_pool);
} else {
- if (target->fmr_pool)
- ib_destroy_fmr_pool(target->fmr_pool);
+ if (ch->fmr_pool)
+ ib_destroy_fmr_pool(ch->fmr_pool);
}
- ib_destroy_qp(target->qp);
- ib_destroy_cq(target->send_cq);
- ib_destroy_cq(target->recv_cq);
+ srp_destroy_qp(ch);
+ ib_destroy_cq(ch->send_cq);
+ ib_destroy_cq(ch->recv_cq);
+
+ /*
+ * Avoid that the SCSI error handler tries to use this channel after
+ * it has been freed. The SCSI error handler can namely continue
+ * trying to perform recovery actions after scsi_remove_host()
+ * returned.
+ */
+ ch->target = NULL;
- target->qp = NULL;
- target->send_cq = target->recv_cq = NULL;
+ ch->qp = NULL;
+ ch->send_cq = ch->recv_cq = NULL;
- if (target->rx_ring) {
+ if (ch->rx_ring) {
for (i = 0; i < target->queue_size; ++i)
- srp_free_iu(target->srp_host, target->rx_ring[i]);
- kfree(target->rx_ring);
- target->rx_ring = NULL;
+ srp_free_iu(target->srp_host, ch->rx_ring[i]);
+ kfree(ch->rx_ring);
+ ch->rx_ring = NULL;
}
- if (target->tx_ring) {
+ if (ch->tx_ring) {
for (i = 0; i < target->queue_size; ++i)
- srp_free_iu(target->srp_host, target->tx_ring[i]);
- kfree(target->tx_ring);
- target->tx_ring = NULL;
+ srp_free_iu(target->srp_host, ch->tx_ring[i]);
+ kfree(ch->tx_ring);
+ ch->tx_ring = NULL;
}
}
static void srp_path_rec_completion(int status,
struct ib_sa_path_rec *pathrec,
- void *target_ptr)
+ void *ch_ptr)
{
- struct srp_target_port *target = target_ptr;
+ struct srp_rdma_ch *ch = ch_ptr;
+ struct srp_target_port *target = ch->target;
- target->status = status;
+ ch->status = status;
if (status)
shost_printk(KERN_ERR, target->scsi_host,
PFX "Got failed path rec status %d\n", status);
else
- target->path = *pathrec;
- complete(&target->done);
+ ch->path = *pathrec;
+ complete(&ch->done);
}
-static int srp_lookup_path(struct srp_target_port *target)
+static int srp_lookup_path(struct srp_rdma_ch *ch)
{
+ struct srp_target_port *target = ch->target;
int ret;
- target->path.numb_path = 1;
-
- init_completion(&target->done);
-
- target->path_query_id = ib_sa_path_rec_get(&srp_sa_client,
- target->srp_host->srp_dev->dev,
- target->srp_host->port,
- &target->path,
- IB_SA_PATH_REC_SERVICE_ID |
- IB_SA_PATH_REC_DGID |
- IB_SA_PATH_REC_SGID |
- IB_SA_PATH_REC_NUMB_PATH |
- IB_SA_PATH_REC_PKEY,
- SRP_PATH_REC_TIMEOUT_MS,
- GFP_KERNEL,
- srp_path_rec_completion,
- target, &target->path_query);
- if (target->path_query_id < 0)
- return target->path_query_id;
-
- ret = wait_for_completion_interruptible(&target->done);
+ ch->path.numb_path = 1;
+
+ init_completion(&ch->done);
+
+ ch->path_query_id = ib_sa_path_rec_get(&srp_sa_client,
+ target->srp_host->srp_dev->dev,
+ target->srp_host->port,
+ &ch->path,
+ IB_SA_PATH_REC_SERVICE_ID |
+ IB_SA_PATH_REC_DGID |
+ IB_SA_PATH_REC_SGID |
+ IB_SA_PATH_REC_NUMB_PATH |
+ IB_SA_PATH_REC_PKEY,
+ SRP_PATH_REC_TIMEOUT_MS,
+ GFP_KERNEL,
+ srp_path_rec_completion,
+ ch, &ch->path_query);
+ if (ch->path_query_id < 0)
+ return ch->path_query_id;
+
+ ret = wait_for_completion_interruptible(&ch->done);
if (ret < 0)
return ret;
- if (target->status < 0)
+ if (ch->status < 0)
shost_printk(KERN_WARNING, target->scsi_host,
PFX "Path record query failed\n");
- return target->status;
+ return ch->status;
}
-static int srp_send_req(struct srp_target_port *target)
+static int srp_send_req(struct srp_rdma_ch *ch, bool multich)
{
+ struct srp_target_port *target = ch->target;
struct {
struct ib_cm_req_param param;
struct srp_login_req priv;
if (!req)
return -ENOMEM;
- req->param.primary_path = &target->path;
+ req->param.primary_path = &ch->path;
req->param.alternate_path = NULL;
req->param.service_id = target->service_id;
- req->param.qp_num = target->qp->qp_num;
- req->param.qp_type = target->qp->qp_type;
+ req->param.qp_num = ch->qp->qp_num;
+ req->param.qp_type = ch->qp->qp_type;
req->param.private_data = &req->priv;
req->param.private_data_len = sizeof req->priv;
req->param.flow_control = 1;
req->priv.req_it_iu_len = cpu_to_be32(target->max_iu_len);
req->priv.req_buf_fmt = cpu_to_be16(SRP_BUF_FORMAT_DIRECT |
SRP_BUF_FORMAT_INDIRECT);
+ req->priv.req_flags = (multich ? SRP_MULTICHAN_MULTI :
+ SRP_MULTICHAN_SINGLE);
/*
* In the published SRP specification (draft rev. 16a), the
* port identifier format is 8 bytes of ID extension followed
*/
if (target->io_class == SRP_REV10_IB_IO_CLASS) {
memcpy(req->priv.initiator_port_id,
- &target->path.sgid.global.interface_id, 8);
+ &target->sgid.global.interface_id, 8);
memcpy(req->priv.initiator_port_id + 8,
&target->initiator_ext, 8);
memcpy(req->priv.target_port_id, &target->ioc_guid, 8);
memcpy(req->priv.initiator_port_id,
&target->initiator_ext, 8);
memcpy(req->priv.initiator_port_id + 8,
- &target->path.sgid.global.interface_id, 8);
+ &target->sgid.global.interface_id, 8);
memcpy(req->priv.target_port_id, &target->id_ext, 8);
memcpy(req->priv.target_port_id + 8, &target->ioc_guid, 8);
}
&target->srp_host->srp_dev->dev->node_guid, 8);
}
- status = ib_send_cm_req(target->cm_id, &req->param);
+ status = ib_send_cm_req(ch->cm_id, &req->param);
kfree(req);
static void srp_disconnect_target(struct srp_target_port *target)
{
+ struct srp_rdma_ch *ch;
+ int i;
+
if (srp_change_conn_state(target, false)) {
/* XXX should send SRP_I_LOGOUT request */
- if (ib_send_cm_dreq(target->cm_id, NULL, 0)) {
- shost_printk(KERN_DEBUG, target->scsi_host,
- PFX "Sending CM DREQ failed\n");
+ for (i = 0; i < target->ch_count; i++) {
+ ch = &target->ch[i];
+ if (ch->cm_id && ib_send_cm_dreq(ch->cm_id, NULL, 0)) {
+ shost_printk(KERN_DEBUG, target->scsi_host,
+ PFX "Sending CM DREQ failed\n");
+ }
}
}
}
-static void srp_free_req_data(struct srp_target_port *target)
+static void srp_free_req_data(struct srp_target_port *target,
+ struct srp_rdma_ch *ch)
{
struct srp_device *dev = target->srp_host->srp_dev;
struct ib_device *ibdev = dev->dev;
struct srp_request *req;
int i;
- if (!target->req_ring)
+ if (!ch->target || !ch->req_ring)
return;
for (i = 0; i < target->req_ring_size; ++i) {
- req = &target->req_ring[i];
+ req = &ch->req_ring[i];
if (dev->use_fast_reg)
kfree(req->fr_list);
else
kfree(req->indirect_desc);
}
- kfree(target->req_ring);
- target->req_ring = NULL;
+ kfree(ch->req_ring);
+ ch->req_ring = NULL;
}
-static int srp_alloc_req_data(struct srp_target_port *target)
+static int srp_alloc_req_data(struct srp_rdma_ch *ch)
{
+ struct srp_target_port *target = ch->target;
struct srp_device *srp_dev = target->srp_host->srp_dev;
struct ib_device *ibdev = srp_dev->dev;
struct srp_request *req;
dma_addr_t dma_addr;
int i, ret = -ENOMEM;
- INIT_LIST_HEAD(&target->free_reqs);
-
- target->req_ring = kzalloc(target->req_ring_size *
- sizeof(*target->req_ring), GFP_KERNEL);
- if (!target->req_ring)
+ ch->req_ring = kcalloc(target->req_ring_size, sizeof(*ch->req_ring),
+ GFP_KERNEL);
+ if (!ch->req_ring)
goto out;
for (i = 0; i < target->req_ring_size; ++i) {
- req = &target->req_ring[i];
+ req = &ch->req_ring[i];
mr_list = kmalloc(target->cmd_sg_cnt * sizeof(void *),
GFP_KERNEL);
if (!mr_list)
goto out;
req->indirect_dma_addr = dma_addr;
- req->index = i;
- list_add_tail(&req->list, &target->free_reqs);
}
ret = 0;
static void srp_remove_target(struct srp_target_port *target)
{
+ struct srp_rdma_ch *ch;
+ int i;
+
WARN_ON_ONCE(target->state != SRP_TARGET_REMOVED);
srp_del_scsi_host_attr(target->scsi_host);
scsi_remove_host(target->scsi_host);
srp_stop_rport_timers(target->rport);
srp_disconnect_target(target);
- ib_destroy_cm_id(target->cm_id);
- srp_free_target_ib(target);
+ for (i = 0; i < target->ch_count; i++) {
+ ch = &target->ch[i];
+ srp_free_ch_ib(target, ch);
+ }
cancel_work_sync(&target->tl_err_work);
srp_rport_put(target->rport);
- srp_free_req_data(target);
+ for (i = 0; i < target->ch_count; i++) {
+ ch = &target->ch[i];
+ srp_free_req_data(target, ch);
+ }
+ kfree(target->ch);
+ target->ch = NULL;
spin_lock(&target->srp_host->target_lock);
list_del(&target->list);
srp_queue_remove_work(target);
}
-static int srp_connect_target(struct srp_target_port *target)
+static int srp_connect_ch(struct srp_rdma_ch *ch, bool multich)
{
- int retries = 3;
+ struct srp_target_port *target = ch->target;
int ret;
- WARN_ON_ONCE(target->connected);
+ WARN_ON_ONCE(!multich && target->connected);
target->qp_in_error = false;
- ret = srp_lookup_path(target);
+ ret = srp_lookup_path(ch);
if (ret)
return ret;
while (1) {
- init_completion(&target->done);
- ret = srp_send_req(target);
+ init_completion(&ch->done);
+ ret = srp_send_req(ch, multich);
if (ret)
return ret;
- ret = wait_for_completion_interruptible(&target->done);
+ ret = wait_for_completion_interruptible(&ch->done);
if (ret < 0)
return ret;
* back, or SRP_DLID_REDIRECT if we get a lid/qp
* redirect REJ back.
*/
- switch (target->status) {
+ switch (ch->status) {
case 0:
srp_change_conn_state(target, true);
return 0;
case SRP_PORT_REDIRECT:
- ret = srp_lookup_path(target);
+ ret = srp_lookup_path(ch);
if (ret)
return ret;
break;
break;
case SRP_STALE_CONN:
- /* Our current CM id was stale, and is now in timewait.
- * Try to reconnect with a new one.
- */
- if (!retries-- || srp_new_cm_id(target)) {
- shost_printk(KERN_ERR, target->scsi_host, PFX
- "giving up on stale connection\n");
- target->status = -ECONNRESET;
- return target->status;
- }
-
shost_printk(KERN_ERR, target->scsi_host, PFX
- "retrying stale connection\n");
- break;
+ "giving up on stale connection\n");
+ ch->status = -ECONNRESET;
+ return ch->status;
default:
- return target->status;
+ return ch->status;
}
}
}
-static int srp_inv_rkey(struct srp_target_port *target, u32 rkey)
+static int srp_inv_rkey(struct srp_rdma_ch *ch, u32 rkey)
{
struct ib_send_wr *bad_wr;
struct ib_send_wr wr = {
.ex.invalidate_rkey = rkey,
};
- return ib_post_send(target->qp, &wr, &bad_wr);
+ return ib_post_send(ch->qp, &wr, &bad_wr);
}
static void srp_unmap_data(struct scsi_cmnd *scmnd,
- struct srp_target_port *target,
+ struct srp_rdma_ch *ch,
struct srp_request *req)
{
+ struct srp_target_port *target = ch->target;
struct srp_device *dev = target->srp_host->srp_dev;
struct ib_device *ibdev = dev->dev;
int i, res;
struct srp_fr_desc **pfr;
for (i = req->nmdesc, pfr = req->fr_list; i > 0; i--, pfr++) {
- res = srp_inv_rkey(target, (*pfr)->mr->rkey);
+ res = srp_inv_rkey(ch, (*pfr)->mr->rkey);
if (res < 0) {
shost_printk(KERN_ERR, target->scsi_host, PFX
"Queueing INV WR for rkey %#x failed (%d)\n",
}
}
if (req->nmdesc)
- srp_fr_pool_put(target->fr_pool, req->fr_list,
+ srp_fr_pool_put(ch->fr_pool, req->fr_list,
req->nmdesc);
} else {
struct ib_pool_fmr **pfmr;
/**
* srp_claim_req - Take ownership of the scmnd associated with a request.
- * @target: SRP target port.
+ * @ch: SRP RDMA channel.
* @req: SRP request.
* @sdev: If not NULL, only take ownership for this SCSI device.
* @scmnd: If NULL, take ownership of @req->scmnd. If not NULL, only take
* Return value:
* Either NULL or a pointer to the SCSI command the caller became owner of.
*/
-static struct scsi_cmnd *srp_claim_req(struct srp_target_port *target,
+static struct scsi_cmnd *srp_claim_req(struct srp_rdma_ch *ch,
struct srp_request *req,
struct scsi_device *sdev,
struct scsi_cmnd *scmnd)
{
unsigned long flags;
- spin_lock_irqsave(&target->lock, flags);
+ spin_lock_irqsave(&ch->lock, flags);
if (req->scmnd &&
(!sdev || req->scmnd->device == sdev) &&
(!scmnd || req->scmnd == scmnd)) {
} else {
scmnd = NULL;
}
- spin_unlock_irqrestore(&target->lock, flags);
+ spin_unlock_irqrestore(&ch->lock, flags);
return scmnd;
}
/**
* srp_free_req() - Unmap data and add request to the free request list.
- * @target: SRP target port.
+ * @ch: SRP RDMA channel.
* @req: Request to be freed.
* @scmnd: SCSI command associated with @req.
* @req_lim_delta: Amount to be added to @target->req_lim.
*/
-static void srp_free_req(struct srp_target_port *target,
- struct srp_request *req, struct scsi_cmnd *scmnd,
- s32 req_lim_delta)
+static void srp_free_req(struct srp_rdma_ch *ch, struct srp_request *req,
+ struct scsi_cmnd *scmnd, s32 req_lim_delta)
{
unsigned long flags;
- srp_unmap_data(scmnd, target, req);
+ srp_unmap_data(scmnd, ch, req);
- spin_lock_irqsave(&target->lock, flags);
- target->req_lim += req_lim_delta;
- list_add_tail(&req->list, &target->free_reqs);
- spin_unlock_irqrestore(&target->lock, flags);
+ spin_lock_irqsave(&ch->lock, flags);
+ ch->req_lim += req_lim_delta;
+ spin_unlock_irqrestore(&ch->lock, flags);
}
-static void srp_finish_req(struct srp_target_port *target,
- struct srp_request *req, struct scsi_device *sdev,
- int result)
+static void srp_finish_req(struct srp_rdma_ch *ch, struct srp_request *req,
+ struct scsi_device *sdev, int result)
{
- struct scsi_cmnd *scmnd = srp_claim_req(target, req, sdev, NULL);
+ struct scsi_cmnd *scmnd = srp_claim_req(ch, req, sdev, NULL);
if (scmnd) {
- srp_free_req(target, req, scmnd, 0);
+ srp_free_req(ch, req, scmnd, 0);
scmnd->result = result;
scmnd->scsi_done(scmnd);
}
static void srp_terminate_io(struct srp_rport *rport)
{
struct srp_target_port *target = rport->lld_data;
+ struct srp_rdma_ch *ch;
struct Scsi_Host *shost = target->scsi_host;
struct scsi_device *sdev;
- int i;
+ int i, j;
/*
* Invoking srp_terminate_io() while srp_queuecommand() is running
shost_for_each_device(sdev, shost)
WARN_ON_ONCE(sdev->request_queue->request_fn_active);
- for (i = 0; i < target->req_ring_size; ++i) {
- struct srp_request *req = &target->req_ring[i];
- srp_finish_req(target, req, NULL, DID_TRANSPORT_FAILFAST << 16);
+ for (i = 0; i < target->ch_count; i++) {
+ ch = &target->ch[i];
+
+ for (j = 0; j < target->req_ring_size; ++j) {
+ struct srp_request *req = &ch->req_ring[j];
+
+ srp_finish_req(ch, req, NULL,
+ DID_TRANSPORT_FAILFAST << 16);
+ }
}
}
static int srp_rport_reconnect(struct srp_rport *rport)
{
struct srp_target_port *target = rport->lld_data;
- int i, ret;
+ struct srp_rdma_ch *ch;
+ int i, j, ret = 0;
+ bool multich = false;
srp_disconnect_target(target);
+
+ if (target->state == SRP_TARGET_SCANNING)
+ return -ENODEV;
+
/*
* Now get a new local CM ID so that we avoid confusing the target in
* case things are really fouled up. Doing so also ensures that all CM
* callbacks will have finished before a new QP is allocated.
*/
- ret = srp_new_cm_id(target);
-
- for (i = 0; i < target->req_ring_size; ++i) {
- struct srp_request *req = &target->req_ring[i];
- srp_finish_req(target, req, NULL, DID_RESET << 16);
+ for (i = 0; i < target->ch_count; i++) {
+ ch = &target->ch[i];
+ if (!ch->target)
+ break;
+ ret += srp_new_cm_id(ch);
}
+ for (i = 0; i < target->ch_count; i++) {
+ ch = &target->ch[i];
+ if (!ch->target)
+ break;
+ for (j = 0; j < target->req_ring_size; ++j) {
+ struct srp_request *req = &ch->req_ring[j];
- /*
- * Whether or not creating a new CM ID succeeded, create a new
- * QP. This guarantees that all callback functions for the old QP have
- * finished before any send requests are posted on the new QP.
- */
- ret += srp_create_target_ib(target);
-
- INIT_LIST_HEAD(&target->free_tx);
- for (i = 0; i < target->queue_size; ++i)
- list_add(&target->tx_ring[i]->list, &target->free_tx);
+ srp_finish_req(ch, req, NULL, DID_RESET << 16);
+ }
+ }
+ for (i = 0; i < target->ch_count; i++) {
+ ch = &target->ch[i];
+ if (!ch->target)
+ break;
+ /*
+ * Whether or not creating a new CM ID succeeded, create a new
+ * QP. This guarantees that all completion callback function
+ * invocations have finished before request resetting starts.
+ */
+ ret += srp_create_ch_ib(ch);
- if (ret == 0)
- ret = srp_connect_target(target);
+ INIT_LIST_HEAD(&ch->free_tx);
+ for (j = 0; j < target->queue_size; ++j)
+ list_add(&ch->tx_ring[j]->list, &ch->free_tx);
+ }
+ for (i = 0; i < target->ch_count; i++) {
+ ch = &target->ch[i];
+ if (ret || !ch->target) {
+ if (i > 1)
+ ret = 0;
+ break;
+ }
+ ret = srp_connect_ch(ch, multich);
+ multich = true;
+ }
if (ret == 0)
shost_printk(KERN_INFO, target->scsi_host,
}
static int srp_map_finish_fmr(struct srp_map_state *state,
- struct srp_target_port *target)
+ struct srp_rdma_ch *ch)
{
struct ib_pool_fmr *fmr;
u64 io_addr = 0;
- fmr = ib_fmr_pool_map_phys(target->fmr_pool, state->pages,
+ fmr = ib_fmr_pool_map_phys(ch->fmr_pool, state->pages,
state->npages, io_addr);
if (IS_ERR(fmr))
return PTR_ERR(fmr);
}
static int srp_map_finish_fr(struct srp_map_state *state,
- struct srp_target_port *target)
+ struct srp_rdma_ch *ch)
{
+ struct srp_target_port *target = ch->target;
struct srp_device *dev = target->srp_host->srp_dev;
struct ib_send_wr *bad_wr;
struct ib_send_wr wr;
struct srp_fr_desc *desc;
u32 rkey;
- desc = srp_fr_pool_get(target->fr_pool);
+ desc = srp_fr_pool_get(ch->fr_pool);
if (!desc)
return -ENOMEM;
srp_map_desc(state, state->base_dma_addr, state->dma_len,
desc->mr->rkey);
- return ib_post_send(target->qp, &wr, &bad_wr);
+ return ib_post_send(ch->qp, &wr, &bad_wr);
}
static int srp_finish_mapping(struct srp_map_state *state,
- struct srp_target_port *target)
+ struct srp_rdma_ch *ch)
{
+ struct srp_target_port *target = ch->target;
int ret = 0;
if (state->npages == 0)
target->rkey);
else
ret = target->srp_host->srp_dev->use_fast_reg ?
- srp_map_finish_fr(state, target) :
- srp_map_finish_fmr(state, target);
+ srp_map_finish_fr(state, ch) :
+ srp_map_finish_fmr(state, ch);
if (ret == 0) {
state->npages = 0;
}
static int srp_map_sg_entry(struct srp_map_state *state,
- struct srp_target_port *target,
+ struct srp_rdma_ch *ch,
struct scatterlist *sg, int sg_index,
bool use_mr)
{
+ struct srp_target_port *target = ch->target;
struct srp_device *dev = target->srp_host->srp_dev;
struct ib_device *ibdev = dev->dev;
dma_addr_t dma_addr = ib_sg_dma_address(ibdev, sg);
*/
if ((!dev->use_fast_reg && dma_addr & ~dev->mr_page_mask) ||
dma_len > dev->mr_max_size) {
- ret = srp_finish_mapping(state, target);
+ ret = srp_finish_mapping(state, ch);
if (ret)
return ret;
while (dma_len) {
unsigned offset = dma_addr & ~dev->mr_page_mask;
if (state->npages == dev->max_pages_per_mr || offset != 0) {
- ret = srp_finish_mapping(state, target);
+ ret = srp_finish_mapping(state, ch);
if (ret)
return ret;
*/
ret = 0;
if (len != dev->mr_page_size) {
- ret = srp_finish_mapping(state, target);
+ ret = srp_finish_mapping(state, ch);
if (!ret)
srp_map_update_start(state, NULL, 0, 0);
}
return ret;
}
-static int srp_map_sg(struct srp_map_state *state,
- struct srp_target_port *target, struct srp_request *req,
- struct scatterlist *scat, int count)
+static int srp_map_sg(struct srp_map_state *state, struct srp_rdma_ch *ch,
+ struct srp_request *req, struct scatterlist *scat,
+ int count)
{
+ struct srp_target_port *target = ch->target;
struct srp_device *dev = target->srp_host->srp_dev;
struct ib_device *ibdev = dev->dev;
struct scatterlist *sg;
state->pages = req->map_page;
if (dev->use_fast_reg) {
state->next_fr = req->fr_list;
- use_mr = !!target->fr_pool;
+ use_mr = !!ch->fr_pool;
} else {
state->next_fmr = req->fmr_list;
- use_mr = !!target->fmr_pool;
+ use_mr = !!ch->fmr_pool;
}
for_each_sg(scat, sg, count, i) {
- if (srp_map_sg_entry(state, target, sg, i, use_mr)) {
+ if (srp_map_sg_entry(state, ch, sg, i, use_mr)) {
/*
* Memory registration failed, so backtrack to the
* first unmapped entry and continue on without using
}
}
- if (use_mr && srp_finish_mapping(state, target))
+ if (use_mr && srp_finish_mapping(state, ch))
goto backtrack;
req->nmdesc = state->nmdesc;
return 0;
}
-static int srp_map_data(struct scsi_cmnd *scmnd, struct srp_target_port *target,
+static int srp_map_data(struct scsi_cmnd *scmnd, struct srp_rdma_ch *ch,
struct srp_request *req)
{
+ struct srp_target_port *target = ch->target;
struct scatterlist *scat;
struct srp_cmd *cmd = req->cmd->buf;
int len, nents, count;
target->indirect_size, DMA_TO_DEVICE);
memset(&state, 0, sizeof(state));
- srp_map_sg(&state, target, req, scat, count);
+ srp_map_sg(&state, ch, req, scat, count);
/* We've mapped the request, now pull as much of the indirect
* descriptor table as we can into the command buffer. If this
/*
* Return an IU and possible credit to the free pool
*/
-static void srp_put_tx_iu(struct srp_target_port *target, struct srp_iu *iu,
+static void srp_put_tx_iu(struct srp_rdma_ch *ch, struct srp_iu *iu,
enum srp_iu_type iu_type)
{
unsigned long flags;
- spin_lock_irqsave(&target->lock, flags);
- list_add(&iu->list, &target->free_tx);
+ spin_lock_irqsave(&ch->lock, flags);
+ list_add(&iu->list, &ch->free_tx);
if (iu_type != SRP_IU_RSP)
- ++target->req_lim;
- spin_unlock_irqrestore(&target->lock, flags);
+ ++ch->req_lim;
+ spin_unlock_irqrestore(&ch->lock, flags);
}
/*
- * Must be called with target->lock held to protect req_lim and free_tx.
+ * Must be called with ch->lock held to protect req_lim and free_tx.
* If IU is not sent, it must be returned using srp_put_tx_iu().
*
* Note:
* - SRP_IU_RSP: 1, since a conforming SRP target never sends more than
* one unanswered SRP request to an initiator.
*/
-static struct srp_iu *__srp_get_tx_iu(struct srp_target_port *target,
+static struct srp_iu *__srp_get_tx_iu(struct srp_rdma_ch *ch,
enum srp_iu_type iu_type)
{
+ struct srp_target_port *target = ch->target;
s32 rsv = (iu_type == SRP_IU_TSK_MGMT) ? 0 : SRP_TSK_MGMT_SQ_SIZE;
struct srp_iu *iu;
- srp_send_completion(target->send_cq, target);
+ srp_send_completion(ch->send_cq, ch);
- if (list_empty(&target->free_tx))
+ if (list_empty(&ch->free_tx))
return NULL;
/* Initiator responses to target requests do not consume credits */
if (iu_type != SRP_IU_RSP) {
- if (target->req_lim <= rsv) {
+ if (ch->req_lim <= rsv) {
++target->zero_req_lim;
return NULL;
}
- --target->req_lim;
+ --ch->req_lim;
}
- iu = list_first_entry(&target->free_tx, struct srp_iu, list);
+ iu = list_first_entry(&ch->free_tx, struct srp_iu, list);
list_del(&iu->list);
return iu;
}
-static int srp_post_send(struct srp_target_port *target,
- struct srp_iu *iu, int len)
+static int srp_post_send(struct srp_rdma_ch *ch, struct srp_iu *iu, int len)
{
+ struct srp_target_port *target = ch->target;
struct ib_sge list;
struct ib_send_wr wr, *bad_wr;
wr.opcode = IB_WR_SEND;
wr.send_flags = IB_SEND_SIGNALED;
- return ib_post_send(target->qp, &wr, &bad_wr);
+ return ib_post_send(ch->qp, &wr, &bad_wr);
}
-static int srp_post_recv(struct srp_target_port *target, struct srp_iu *iu)
+static int srp_post_recv(struct srp_rdma_ch *ch, struct srp_iu *iu)
{
+ struct srp_target_port *target = ch->target;
struct ib_recv_wr wr, *bad_wr;
struct ib_sge list;
wr.sg_list = &list;
wr.num_sge = 1;
- return ib_post_recv(target->qp, &wr, &bad_wr);
+ return ib_post_recv(ch->qp, &wr, &bad_wr);
}
-static void srp_process_rsp(struct srp_target_port *target, struct srp_rsp *rsp)
+static void srp_process_rsp(struct srp_rdma_ch *ch, struct srp_rsp *rsp)
{
+ struct srp_target_port *target = ch->target;
struct srp_request *req;
struct scsi_cmnd *scmnd;
unsigned long flags;
if (unlikely(rsp->tag & SRP_TAG_TSK_MGMT)) {
- spin_lock_irqsave(&target->lock, flags);
- target->req_lim += be32_to_cpu(rsp->req_lim_delta);
- spin_unlock_irqrestore(&target->lock, flags);
+ spin_lock_irqsave(&ch->lock, flags);
+ ch->req_lim += be32_to_cpu(rsp->req_lim_delta);
+ spin_unlock_irqrestore(&ch->lock, flags);
- target->tsk_mgmt_status = -1;
+ ch->tsk_mgmt_status = -1;
if (be32_to_cpu(rsp->resp_data_len) >= 4)
- target->tsk_mgmt_status = rsp->data[3];
- complete(&target->tsk_mgmt_done);
+ ch->tsk_mgmt_status = rsp->data[3];
+ complete(&ch->tsk_mgmt_done);
} else {
- req = &target->req_ring[rsp->tag];
- scmnd = srp_claim_req(target, req, NULL, NULL);
+ scmnd = scsi_host_find_tag(target->scsi_host, rsp->tag);
+ if (scmnd) {
+ req = (void *)scmnd->host_scribble;
+ scmnd = srp_claim_req(ch, req, NULL, scmnd);
+ }
if (!scmnd) {
shost_printk(KERN_ERR, target->scsi_host,
- "Null scmnd for RSP w/tag %016llx\n",
- (unsigned long long) rsp->tag);
+ "Null scmnd for RSP w/tag %#016llx received on ch %td / QP %#x\n",
+ rsp->tag, ch - target->ch, ch->qp->qp_num);
- spin_lock_irqsave(&target->lock, flags);
- target->req_lim += be32_to_cpu(rsp->req_lim_delta);
- spin_unlock_irqrestore(&target->lock, flags);
+ spin_lock_irqsave(&ch->lock, flags);
+ ch->req_lim += be32_to_cpu(rsp->req_lim_delta);
+ spin_unlock_irqrestore(&ch->lock, flags);
return;
}
else if (unlikely(rsp->flags & SRP_RSP_FLAG_DOOVER))
scsi_set_resid(scmnd, -be32_to_cpu(rsp->data_out_res_cnt));
- srp_free_req(target, req, scmnd,
+ srp_free_req(ch, req, scmnd,
be32_to_cpu(rsp->req_lim_delta));
scmnd->host_scribble = NULL;
}
}
-static int srp_response_common(struct srp_target_port *target, s32 req_delta,
+static int srp_response_common(struct srp_rdma_ch *ch, s32 req_delta,
void *rsp, int len)
{
+ struct srp_target_port *target = ch->target;
struct ib_device *dev = target->srp_host->srp_dev->dev;
unsigned long flags;
struct srp_iu *iu;
int err;
- spin_lock_irqsave(&target->lock, flags);
- target->req_lim += req_delta;
- iu = __srp_get_tx_iu(target, SRP_IU_RSP);
- spin_unlock_irqrestore(&target->lock, flags);
+ spin_lock_irqsave(&ch->lock, flags);
+ ch->req_lim += req_delta;
+ iu = __srp_get_tx_iu(ch, SRP_IU_RSP);
+ spin_unlock_irqrestore(&ch->lock, flags);
if (!iu) {
shost_printk(KERN_ERR, target->scsi_host, PFX
memcpy(iu->buf, rsp, len);
ib_dma_sync_single_for_device(dev, iu->dma, len, DMA_TO_DEVICE);
- err = srp_post_send(target, iu, len);
+ err = srp_post_send(ch, iu, len);
if (err) {
shost_printk(KERN_ERR, target->scsi_host, PFX
"unable to post response: %d\n", err);
- srp_put_tx_iu(target, iu, SRP_IU_RSP);
+ srp_put_tx_iu(ch, iu, SRP_IU_RSP);
}
return err;
}
-static void srp_process_cred_req(struct srp_target_port *target,
+static void srp_process_cred_req(struct srp_rdma_ch *ch,
struct srp_cred_req *req)
{
struct srp_cred_rsp rsp = {
};
s32 delta = be32_to_cpu(req->req_lim_delta);
- if (srp_response_common(target, delta, &rsp, sizeof rsp))
- shost_printk(KERN_ERR, target->scsi_host, PFX
+ if (srp_response_common(ch, delta, &rsp, sizeof(rsp)))
+ shost_printk(KERN_ERR, ch->target->scsi_host, PFX
"problems processing SRP_CRED_REQ\n");
}
-static void srp_process_aer_req(struct srp_target_port *target,
+static void srp_process_aer_req(struct srp_rdma_ch *ch,
struct srp_aer_req *req)
{
+ struct srp_target_port *target = ch->target;
struct srp_aer_rsp rsp = {
.opcode = SRP_AER_RSP,
.tag = req->tag,
shost_printk(KERN_ERR, target->scsi_host, PFX
"ignoring AER for LUN %llu\n", be64_to_cpu(req->lun));
- if (srp_response_common(target, delta, &rsp, sizeof rsp))
+ if (srp_response_common(ch, delta, &rsp, sizeof(rsp)))
shost_printk(KERN_ERR, target->scsi_host, PFX
"problems processing SRP_AER_REQ\n");
}
-static void srp_handle_recv(struct srp_target_port *target, struct ib_wc *wc)
+static void srp_handle_recv(struct srp_rdma_ch *ch, struct ib_wc *wc)
{
+ struct srp_target_port *target = ch->target;
struct ib_device *dev = target->srp_host->srp_dev->dev;
struct srp_iu *iu = (struct srp_iu *) (uintptr_t) wc->wr_id;
int res;
u8 opcode;
- ib_dma_sync_single_for_cpu(dev, iu->dma, target->max_ti_iu_len,
+ ib_dma_sync_single_for_cpu(dev, iu->dma, ch->max_ti_iu_len,
DMA_FROM_DEVICE);
opcode = *(u8 *) iu->buf;
switch (opcode) {
case SRP_RSP:
- srp_process_rsp(target, iu->buf);
+ srp_process_rsp(ch, iu->buf);
break;
case SRP_CRED_REQ:
- srp_process_cred_req(target, iu->buf);
+ srp_process_cred_req(ch, iu->buf);
break;
case SRP_AER_REQ:
- srp_process_aer_req(target, iu->buf);
+ srp_process_aer_req(ch, iu->buf);
break;
case SRP_T_LOGOUT:
break;
}
- ib_dma_sync_single_for_device(dev, iu->dma, target->max_ti_iu_len,
+ ib_dma_sync_single_for_device(dev, iu->dma, ch->max_ti_iu_len,
DMA_FROM_DEVICE);
- res = srp_post_recv(target, iu);
+ res = srp_post_recv(ch, iu);
if (res != 0)
shost_printk(KERN_ERR, target->scsi_host,
PFX "Recv failed with error code %d\n", res);
}
static void srp_handle_qp_err(u64 wr_id, enum ib_wc_status wc_status,
- bool send_err, struct srp_target_port *target)
+ bool send_err, struct srp_rdma_ch *ch)
{
+ struct srp_target_port *target = ch->target;
+
+ if (wr_id == SRP_LAST_WR_ID) {
+ complete(&ch->done);
+ return;
+ }
+
if (target->connected && !target->qp_in_error) {
if (wr_id & LOCAL_INV_WR_ID_MASK) {
shost_printk(KERN_ERR, target->scsi_host, PFX
target->qp_in_error = true;
}
-static void srp_recv_completion(struct ib_cq *cq, void *target_ptr)
+static void srp_recv_completion(struct ib_cq *cq, void *ch_ptr)
{
- struct srp_target_port *target = target_ptr;
+ struct srp_rdma_ch *ch = ch_ptr;
struct ib_wc wc;
ib_req_notify_cq(cq, IB_CQ_NEXT_COMP);
while (ib_poll_cq(cq, 1, &wc) > 0) {
if (likely(wc.status == IB_WC_SUCCESS)) {
- srp_handle_recv(target, &wc);
+ srp_handle_recv(ch, &wc);
} else {
- srp_handle_qp_err(wc.wr_id, wc.status, false, target);
+ srp_handle_qp_err(wc.wr_id, wc.status, false, ch);
}
}
}
-static void srp_send_completion(struct ib_cq *cq, void *target_ptr)
+static void srp_send_completion(struct ib_cq *cq, void *ch_ptr)
{
- struct srp_target_port *target = target_ptr;
+ struct srp_rdma_ch *ch = ch_ptr;
struct ib_wc wc;
struct srp_iu *iu;
while (ib_poll_cq(cq, 1, &wc) > 0) {
if (likely(wc.status == IB_WC_SUCCESS)) {
iu = (struct srp_iu *) (uintptr_t) wc.wr_id;
- list_add(&iu->list, &target->free_tx);
+ list_add(&iu->list, &ch->free_tx);
} else {
- srp_handle_qp_err(wc.wr_id, wc.status, true, target);
+ srp_handle_qp_err(wc.wr_id, wc.status, true, ch);
}
}
}
{
struct srp_target_port *target = host_to_target(shost);
struct srp_rport *rport = target->rport;
+ struct srp_rdma_ch *ch;
struct srp_request *req;
struct srp_iu *iu;
struct srp_cmd *cmd;
struct ib_device *dev;
unsigned long flags;
+ u32 tag;
+ u16 idx;
int len, ret;
const bool in_scsi_eh = !in_interrupt() && current == shost->ehandler;
if (unlikely(scmnd->result))
goto err;
- spin_lock_irqsave(&target->lock, flags);
- iu = __srp_get_tx_iu(target, SRP_IU_CMD);
- if (!iu)
- goto err_unlock;
+ WARN_ON_ONCE(scmnd->request->tag < 0);
+ tag = blk_mq_unique_tag(scmnd->request);
+ ch = &target->ch[blk_mq_unique_tag_to_hwq(tag)];
+ idx = blk_mq_unique_tag_to_tag(tag);
+ WARN_ONCE(idx >= target->req_ring_size, "%s: tag %#x: idx %d >= %d\n",
+ dev_name(&shost->shost_gendev), tag, idx,
+ target->req_ring_size);
- req = list_first_entry(&target->free_reqs, struct srp_request, list);
- list_del(&req->list);
- spin_unlock_irqrestore(&target->lock, flags);
+ spin_lock_irqsave(&ch->lock, flags);
+ iu = __srp_get_tx_iu(ch, SRP_IU_CMD);
+ spin_unlock_irqrestore(&ch->lock, flags);
+ if (!iu)
+ goto err;
+
+ req = &ch->req_ring[idx];
dev = target->srp_host->srp_dev->dev;
ib_dma_sync_single_for_cpu(dev, iu->dma, target->max_iu_len,
DMA_TO_DEVICE);
cmd->opcode = SRP_CMD;
cmd->lun = cpu_to_be64((u64) scmnd->device->lun << 48);
- cmd->tag = req->index;
+ cmd->tag = tag;
memcpy(cmd->cdb, scmnd->cmnd, scmnd->cmd_len);
req->scmnd = scmnd;
req->cmd = iu;
- len = srp_map_data(scmnd, target, req);
+ len = srp_map_data(scmnd, ch, req);
if (len < 0) {
shost_printk(KERN_ERR, target->scsi_host,
PFX "Failed to map data (%d)\n", len);
ib_dma_sync_single_for_device(dev, iu->dma, target->max_iu_len,
DMA_TO_DEVICE);
- if (srp_post_send(target, iu, len)) {
+ if (srp_post_send(ch, iu, len)) {
shost_printk(KERN_ERR, target->scsi_host, PFX "Send failed\n");
goto err_unmap;
}
return ret;
err_unmap:
- srp_unmap_data(scmnd, target, req);
+ srp_unmap_data(scmnd, ch, req);
err_iu:
- srp_put_tx_iu(target, iu, SRP_IU_CMD);
+ srp_put_tx_iu(ch, iu, SRP_IU_CMD);
/*
* Avoid that the loops that iterate over the request ring can
*/
req->scmnd = NULL;
- spin_lock_irqsave(&target->lock, flags);
- list_add(&req->list, &target->free_reqs);
-
-err_unlock:
- spin_unlock_irqrestore(&target->lock, flags);
-
err:
if (scmnd->result) {
scmnd->scsi_done(scmnd);
/*
* Note: the resources allocated in this function are freed in
- * srp_free_target_ib().
+ * srp_free_ch_ib().
*/
-static int srp_alloc_iu_bufs(struct srp_target_port *target)
+static int srp_alloc_iu_bufs(struct srp_rdma_ch *ch)
{
+ struct srp_target_port *target = ch->target;
int i;
- target->rx_ring = kzalloc(target->queue_size * sizeof(*target->rx_ring),
- GFP_KERNEL);
- if (!target->rx_ring)
+ ch->rx_ring = kcalloc(target->queue_size, sizeof(*ch->rx_ring),
+ GFP_KERNEL);
+ if (!ch->rx_ring)
goto err_no_ring;
- target->tx_ring = kzalloc(target->queue_size * sizeof(*target->tx_ring),
- GFP_KERNEL);
- if (!target->tx_ring)
+ ch->tx_ring = kcalloc(target->queue_size, sizeof(*ch->tx_ring),
+ GFP_KERNEL);
+ if (!ch->tx_ring)
goto err_no_ring;
for (i = 0; i < target->queue_size; ++i) {
- target->rx_ring[i] = srp_alloc_iu(target->srp_host,
- target->max_ti_iu_len,
- GFP_KERNEL, DMA_FROM_DEVICE);
- if (!target->rx_ring[i])
+ ch->rx_ring[i] = srp_alloc_iu(target->srp_host,
+ ch->max_ti_iu_len,
+ GFP_KERNEL, DMA_FROM_DEVICE);
+ if (!ch->rx_ring[i])
goto err;
}
for (i = 0; i < target->queue_size; ++i) {
- target->tx_ring[i] = srp_alloc_iu(target->srp_host,
- target->max_iu_len,
- GFP_KERNEL, DMA_TO_DEVICE);
- if (!target->tx_ring[i])
+ ch->tx_ring[i] = srp_alloc_iu(target->srp_host,
+ target->max_iu_len,
+ GFP_KERNEL, DMA_TO_DEVICE);
+ if (!ch->tx_ring[i])
goto err;
- list_add(&target->tx_ring[i]->list, &target->free_tx);
+ list_add(&ch->tx_ring[i]->list, &ch->free_tx);
}
return 0;
err:
for (i = 0; i < target->queue_size; ++i) {
- srp_free_iu(target->srp_host, target->rx_ring[i]);
- srp_free_iu(target->srp_host, target->tx_ring[i]);
+ srp_free_iu(target->srp_host, ch->rx_ring[i]);
+ srp_free_iu(target->srp_host, ch->tx_ring[i]);
}
err_no_ring:
- kfree(target->tx_ring);
- target->tx_ring = NULL;
- kfree(target->rx_ring);
- target->rx_ring = NULL;
+ kfree(ch->tx_ring);
+ ch->tx_ring = NULL;
+ kfree(ch->rx_ring);
+ ch->rx_ring = NULL;
return -ENOMEM;
}
static void srp_cm_rep_handler(struct ib_cm_id *cm_id,
struct srp_login_rsp *lrsp,
- struct srp_target_port *target)
+ struct srp_rdma_ch *ch)
{
+ struct srp_target_port *target = ch->target;
struct ib_qp_attr *qp_attr = NULL;
int attr_mask = 0;
int ret;
int i;
if (lrsp->opcode == SRP_LOGIN_RSP) {
- target->max_ti_iu_len = be32_to_cpu(lrsp->max_ti_iu_len);
- target->req_lim = be32_to_cpu(lrsp->req_lim_delta);
+ ch->max_ti_iu_len = be32_to_cpu(lrsp->max_ti_iu_len);
+ ch->req_lim = be32_to_cpu(lrsp->req_lim_delta);
/*
* Reserve credits for task management so we don't
* bounce requests back to the SCSI mid-layer.
*/
target->scsi_host->can_queue
- = min(target->req_lim - SRP_TSK_MGMT_SQ_SIZE,
+ = min(ch->req_lim - SRP_TSK_MGMT_SQ_SIZE,
target->scsi_host->can_queue);
target->scsi_host->cmd_per_lun
= min_t(int, target->scsi_host->can_queue,
goto error;
}
- if (!target->rx_ring) {
- ret = srp_alloc_iu_bufs(target);
+ if (!ch->rx_ring) {
+ ret = srp_alloc_iu_bufs(ch);
if (ret)
goto error;
}
if (ret)
goto error_free;
- ret = ib_modify_qp(target->qp, qp_attr, attr_mask);
+ ret = ib_modify_qp(ch->qp, qp_attr, attr_mask);
if (ret)
goto error_free;
for (i = 0; i < target->queue_size; i++) {
- struct srp_iu *iu = target->rx_ring[i];
- ret = srp_post_recv(target, iu);
+ struct srp_iu *iu = ch->rx_ring[i];
+
+ ret = srp_post_recv(ch, iu);
if (ret)
goto error_free;
}
target->rq_tmo_jiffies = srp_compute_rq_tmo(qp_attr, attr_mask);
- ret = ib_modify_qp(target->qp, qp_attr, attr_mask);
+ ret = ib_modify_qp(ch->qp, qp_attr, attr_mask);
if (ret)
goto error_free;
kfree(qp_attr);
error:
- target->status = ret;
+ ch->status = ret;
}
static void srp_cm_rej_handler(struct ib_cm_id *cm_id,
struct ib_cm_event *event,
- struct srp_target_port *target)
+ struct srp_rdma_ch *ch)
{
+ struct srp_target_port *target = ch->target;
struct Scsi_Host *shost = target->scsi_host;
struct ib_class_port_info *cpi;
int opcode;
switch (event->param.rej_rcvd.reason) {
case IB_CM_REJ_PORT_CM_REDIRECT:
cpi = event->param.rej_rcvd.ari;
- target->path.dlid = cpi->redirect_lid;
- target->path.pkey = cpi->redirect_pkey;
+ ch->path.dlid = cpi->redirect_lid;
+ ch->path.pkey = cpi->redirect_pkey;
cm_id->remote_cm_qpn = be32_to_cpu(cpi->redirect_qp) & 0x00ffffff;
- memcpy(target->path.dgid.raw, cpi->redirect_gid, 16);
+ memcpy(ch->path.dgid.raw, cpi->redirect_gid, 16);
- target->status = target->path.dlid ?
+ ch->status = ch->path.dlid ?
SRP_DLID_REDIRECT : SRP_PORT_REDIRECT;
break;
* reject reason code 25 when they mean 24
* (port redirect).
*/
- memcpy(target->path.dgid.raw,
+ memcpy(ch->path.dgid.raw,
event->param.rej_rcvd.ari, 16);
shost_printk(KERN_DEBUG, shost,
PFX "Topspin/Cisco redirect to target port GID %016llx%016llx\n",
- (unsigned long long) be64_to_cpu(target->path.dgid.global.subnet_prefix),
- (unsigned long long) be64_to_cpu(target->path.dgid.global.interface_id));
+ be64_to_cpu(ch->path.dgid.global.subnet_prefix),
+ be64_to_cpu(ch->path.dgid.global.interface_id));
- target->status = SRP_PORT_REDIRECT;
+ ch->status = SRP_PORT_REDIRECT;
} else {
shost_printk(KERN_WARNING, shost,
" REJ reason: IB_CM_REJ_PORT_REDIRECT\n");
- target->status = -ECONNRESET;
+ ch->status = -ECONNRESET;
}
break;
case IB_CM_REJ_DUPLICATE_LOCAL_COMM_ID:
shost_printk(KERN_WARNING, shost,
" REJ reason: IB_CM_REJ_DUPLICATE_LOCAL_COMM_ID\n");
- target->status = -ECONNRESET;
+ ch->status = -ECONNRESET;
break;
case IB_CM_REJ_CONSUMER_DEFINED:
else
shost_printk(KERN_WARNING, shost, PFX
"SRP LOGIN from %pI6 to %pI6 REJECTED, reason 0x%08x\n",
- target->path.sgid.raw,
- target->orig_dgid, reason);
+ target->sgid.raw,
+ target->orig_dgid.raw, reason);
} else
shost_printk(KERN_WARNING, shost,
" REJ reason: IB_CM_REJ_CONSUMER_DEFINED,"
" opcode 0x%02x\n", opcode);
- target->status = -ECONNRESET;
+ ch->status = -ECONNRESET;
break;
case IB_CM_REJ_STALE_CONN:
shost_printk(KERN_WARNING, shost, " REJ reason: stale connection\n");
- target->status = SRP_STALE_CONN;
+ ch->status = SRP_STALE_CONN;
break;
default:
shost_printk(KERN_WARNING, shost, " REJ reason 0x%x\n",
event->param.rej_rcvd.reason);
- target->status = -ECONNRESET;
+ ch->status = -ECONNRESET;
}
}
static int srp_cm_handler(struct ib_cm_id *cm_id, struct ib_cm_event *event)
{
- struct srp_target_port *target = cm_id->context;
+ struct srp_rdma_ch *ch = cm_id->context;
+ struct srp_target_port *target = ch->target;
int comp = 0;
switch (event->event) {
shost_printk(KERN_DEBUG, target->scsi_host,
PFX "Sending CM REQ failed\n");
comp = 1;
- target->status = -ECONNRESET;
+ ch->status = -ECONNRESET;
break;
case IB_CM_REP_RECEIVED:
comp = 1;
- srp_cm_rep_handler(cm_id, event->private_data, target);
+ srp_cm_rep_handler(cm_id, event->private_data, ch);
break;
case IB_CM_REJ_RECEIVED:
shost_printk(KERN_DEBUG, target->scsi_host, PFX "REJ received\n");
comp = 1;
- srp_cm_rej_handler(cm_id, event, target);
+ srp_cm_rej_handler(cm_id, event, ch);
break;
case IB_CM_DREQ_RECEIVED:
PFX "connection closed\n");
comp = 1;
- target->status = 0;
+ ch->status = 0;
break;
case IB_CM_MRA_RECEIVED:
}
if (comp)
- complete(&target->done);
+ complete(&ch->done);
return 0;
}
-/**
- * srp_change_queue_type - changing device queue tag type
- * @sdev: scsi device struct
- * @tag_type: requested tag type
- *
- * Returns queue tag type.
- */
-static int
-srp_change_queue_type(struct scsi_device *sdev, int tag_type)
-{
- if (sdev->tagged_supported) {
- scsi_set_tag_type(sdev, tag_type);
- if (tag_type)
- scsi_activate_tcq(sdev, sdev->queue_depth);
- else
- scsi_deactivate_tcq(sdev, sdev->queue_depth);
- } else
- tag_type = 0;
-
- return tag_type;
-}
-
/**
* srp_change_queue_depth - setting device queue depth
* @sdev: scsi device struct
* @qdepth: requested queue depth
- * @reason: SCSI_QDEPTH_DEFAULT/SCSI_QDEPTH_QFULL/SCSI_QDEPTH_RAMP_UP
- * (see include/scsi/scsi_host.h for definition)
*
* Returns queue depth.
*/
static int
-srp_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
+srp_change_queue_depth(struct scsi_device *sdev, int qdepth)
{
- struct Scsi_Host *shost = sdev->host;
- int max_depth;
- if (reason == SCSI_QDEPTH_DEFAULT || reason == SCSI_QDEPTH_RAMP_UP) {
- max_depth = shost->can_queue;
- if (!sdev->tagged_supported)
- max_depth = 1;
- if (qdepth > max_depth)
- qdepth = max_depth;
- scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
- } else if (reason == SCSI_QDEPTH_QFULL)
- scsi_track_queue_full(sdev, qdepth);
- else
- return -EOPNOTSUPP;
-
- return sdev->queue_depth;
+ if (!sdev->tagged_supported)
+ qdepth = 1;
+ return scsi_change_queue_depth(sdev, qdepth);
}
-static int srp_send_tsk_mgmt(struct srp_target_port *target,
- u64 req_tag, unsigned int lun, u8 func)
+static int srp_send_tsk_mgmt(struct srp_rdma_ch *ch, u64 req_tag,
+ unsigned int lun, u8 func)
{
+ struct srp_target_port *target = ch->target;
struct srp_rport *rport = target->rport;
struct ib_device *dev = target->srp_host->srp_dev->dev;
struct srp_iu *iu;
if (!target->connected || target->qp_in_error)
return -1;
- init_completion(&target->tsk_mgmt_done);
+ init_completion(&ch->tsk_mgmt_done);
/*
- * Lock the rport mutex to avoid that srp_create_target_ib() is
+ * Lock the rport mutex to avoid that srp_create_ch_ib() is
* invoked while a task management function is being sent.
*/
mutex_lock(&rport->mutex);
- spin_lock_irq(&target->lock);
- iu = __srp_get_tx_iu(target, SRP_IU_TSK_MGMT);
- spin_unlock_irq(&target->lock);
+ spin_lock_irq(&ch->lock);
+ iu = __srp_get_tx_iu(ch, SRP_IU_TSK_MGMT);
+ spin_unlock_irq(&ch->lock);
if (!iu) {
mutex_unlock(&rport->mutex);
ib_dma_sync_single_for_device(dev, iu->dma, sizeof *tsk_mgmt,
DMA_TO_DEVICE);
- if (srp_post_send(target, iu, sizeof *tsk_mgmt)) {
- srp_put_tx_iu(target, iu, SRP_IU_TSK_MGMT);
+ if (srp_post_send(ch, iu, sizeof(*tsk_mgmt))) {
+ srp_put_tx_iu(ch, iu, SRP_IU_TSK_MGMT);
mutex_unlock(&rport->mutex);
return -1;
}
mutex_unlock(&rport->mutex);
- if (!wait_for_completion_timeout(&target->tsk_mgmt_done,
+ if (!wait_for_completion_timeout(&ch->tsk_mgmt_done,
msecs_to_jiffies(SRP_ABORT_TIMEOUT_MS)))
return -1;
{
struct srp_target_port *target = host_to_target(scmnd->device->host);
struct srp_request *req = (struct srp_request *) scmnd->host_scribble;
+ u32 tag;
+ u16 ch_idx;
+ struct srp_rdma_ch *ch;
int ret;
shost_printk(KERN_ERR, target->scsi_host, "SRP abort called\n");
- if (!req || !srp_claim_req(target, req, NULL, scmnd))
+ if (!req)
+ return SUCCESS;
+ tag = blk_mq_unique_tag(scmnd->request);
+ ch_idx = blk_mq_unique_tag_to_hwq(tag);
+ if (WARN_ON_ONCE(ch_idx >= target->ch_count))
return SUCCESS;
- if (srp_send_tsk_mgmt(target, req->index, scmnd->device->lun,
+ ch = &target->ch[ch_idx];
+ if (!srp_claim_req(ch, req, NULL, scmnd))
+ return SUCCESS;
+ shost_printk(KERN_ERR, target->scsi_host,
+ "Sending SRP abort for tag %#x\n", tag);
+ if (srp_send_tsk_mgmt(ch, tag, scmnd->device->lun,
SRP_TSK_ABORT_TASK) == 0)
ret = SUCCESS;
else if (target->rport->state == SRP_RPORT_LOST)
ret = FAST_IO_FAIL;
else
ret = FAILED;
- srp_free_req(target, req, scmnd, 0);
+ srp_free_req(ch, req, scmnd, 0);
scmnd->result = DID_ABORT << 16;
scmnd->scsi_done(scmnd);
static int srp_reset_device(struct scsi_cmnd *scmnd)
{
struct srp_target_port *target = host_to_target(scmnd->device->host);
+ struct srp_rdma_ch *ch;
int i;
shost_printk(KERN_ERR, target->scsi_host, "SRP reset_device called\n");
- if (srp_send_tsk_mgmt(target, SRP_TAG_NO_REQ, scmnd->device->lun,
+ ch = &target->ch[0];
+ if (srp_send_tsk_mgmt(ch, SRP_TAG_NO_REQ, scmnd->device->lun,
SRP_TSK_LUN_RESET))
return FAILED;
- if (target->tsk_mgmt_status)
+ if (ch->tsk_mgmt_status)
return FAILED;
- for (i = 0; i < target->req_ring_size; ++i) {
- struct srp_request *req = &target->req_ring[i];
- srp_finish_req(target, req, scmnd->device, DID_RESET << 16);
+ for (i = 0; i < target->ch_count; i++) {
+ ch = &target->ch[i];
+ for (i = 0; i < target->req_ring_size; ++i) {
+ struct srp_request *req = &ch->req_ring[i];
+
+ srp_finish_req(ch, req, scmnd->device, DID_RESET << 16);
+ }
}
return SUCCESS;
{
struct srp_target_port *target = host_to_target(class_to_shost(dev));
- return sprintf(buf, "0x%04x\n", be16_to_cpu(target->path.pkey));
+ return sprintf(buf, "0x%04x\n", be16_to_cpu(target->pkey));
}
static ssize_t show_sgid(struct device *dev, struct device_attribute *attr,
{
struct srp_target_port *target = host_to_target(class_to_shost(dev));
- return sprintf(buf, "%pI6\n", target->path.sgid.raw);
+ return sprintf(buf, "%pI6\n", target->sgid.raw);
}
static ssize_t show_dgid(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct srp_target_port *target = host_to_target(class_to_shost(dev));
+ struct srp_rdma_ch *ch = &target->ch[0];
- return sprintf(buf, "%pI6\n", target->path.dgid.raw);
+ return sprintf(buf, "%pI6\n", ch->path.dgid.raw);
}
static ssize_t show_orig_dgid(struct device *dev,
{
struct srp_target_port *target = host_to_target(class_to_shost(dev));
- return sprintf(buf, "%pI6\n", target->orig_dgid);
+ return sprintf(buf, "%pI6\n", target->orig_dgid.raw);
}
static ssize_t show_req_lim(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct srp_target_port *target = host_to_target(class_to_shost(dev));
+ struct srp_rdma_ch *ch;
+ int i, req_lim = INT_MAX;
- return sprintf(buf, "%d\n", target->req_lim);
+ for (i = 0; i < target->ch_count; i++) {
+ ch = &target->ch[i];
+ req_lim = min(req_lim, ch->req_lim);
+ }
+ return sprintf(buf, "%d\n", req_lim);
}
static ssize_t show_zero_req_lim(struct device *dev,
return sprintf(buf, "%s\n", target->srp_host->srp_dev->dev->name);
}
+static ssize_t show_ch_count(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct srp_target_port *target = host_to_target(class_to_shost(dev));
+
+ return sprintf(buf, "%d\n", target->ch_count);
+}
+
static ssize_t show_comp_vector(struct device *dev,
struct device_attribute *attr, char *buf)
{
static DEVICE_ATTR(zero_req_lim, S_IRUGO, show_zero_req_lim, NULL);
static DEVICE_ATTR(local_ib_port, S_IRUGO, show_local_ib_port, NULL);
static DEVICE_ATTR(local_ib_device, S_IRUGO, show_local_ib_device, NULL);
+static DEVICE_ATTR(ch_count, S_IRUGO, show_ch_count, NULL);
static DEVICE_ATTR(comp_vector, S_IRUGO, show_comp_vector, NULL);
static DEVICE_ATTR(tl_retry_count, S_IRUGO, show_tl_retry_count, NULL);
static DEVICE_ATTR(cmd_sg_entries, S_IRUGO, show_cmd_sg_entries, NULL);
&dev_attr_zero_req_lim,
&dev_attr_local_ib_port,
&dev_attr_local_ib_device,
+ &dev_attr_ch_count,
&dev_attr_comp_vector,
&dev_attr_tl_retry_count,
&dev_attr_cmd_sg_entries,
.info = srp_target_info,
.queuecommand = srp_queuecommand,
.change_queue_depth = srp_change_queue_depth,
- .change_queue_type = srp_change_queue_type,
+ .change_queue_type = scsi_change_queue_type,
.eh_abort_handler = srp_abort,
.eh_device_reset_handler = srp_reset_device,
.eh_host_reset_handler = srp_reset_host,
.this_id = -1,
.cmd_per_lun = SRP_DEFAULT_CMD_SQ_SIZE,
.use_clustering = ENABLE_CLUSTERING,
- .shost_attrs = srp_host_attrs
+ .shost_attrs = srp_host_attrs,
+ .use_blk_tags = 1,
+ .track_queue_depth = 1,
};
+static int srp_sdev_count(struct Scsi_Host *host)
+{
+ struct scsi_device *sdev;
+ int c = 0;
+
+ shost_for_each_device(sdev, host)
+ c++;
+
+ return c;
+}
+
static int srp_add_target(struct srp_host *host, struct srp_target_port *target)
{
struct srp_rport_identifiers ids;
struct srp_rport *rport;
+ target->state = SRP_TARGET_SCANNING;
sprintf(target->target_name, "SRP.T10:%016llX",
(unsigned long long) be64_to_cpu(target->id_ext));
list_add_tail(&target->list, &host->target_list);
spin_unlock(&host->target_lock);
- target->state = SRP_TARGET_LIVE;
-
scsi_scan_target(&target->scsi_host->shost_gendev,
0, target->scsi_id, SCAN_WILD_CARD, 0);
+ if (!target->connected || target->qp_in_error) {
+ shost_printk(KERN_INFO, target->scsi_host,
+ PFX "SCSI scan failed - removing SCSI host\n");
+ srp_queue_remove_work(target);
+ goto out;
+ }
+
+ pr_debug(PFX "%s: SCSI scan succeeded - detected %d LUNs\n",
+ dev_name(&target->scsi_host->shost_gendev),
+ srp_sdev_count(target->scsi_host));
+
+ spin_lock_irq(&target->lock);
+ if (target->state == SRP_TARGET_SCANNING)
+ target->state = SRP_TARGET_LIVE;
+ spin_unlock_irq(&target->lock);
+
+out:
return 0;
}
}
for (i = 0; i < 16; ++i) {
- strlcpy(dgid, p + i * 2, 3);
- target->path.dgid.raw[i] = simple_strtoul(dgid, NULL, 16);
+ strlcpy(dgid, p + i * 2, sizeof(dgid));
+ if (sscanf(dgid, "%hhx",
+ &target->orig_dgid.raw[i]) < 1) {
+ ret = -EINVAL;
+ kfree(p);
+ goto out;
+ }
}
kfree(p);
- memcpy(target->orig_dgid, target->path.dgid.raw, 16);
break;
case SRP_OPT_PKEY:
pr_warn("bad P_Key parameter '%s'\n", p);
goto out;
}
- target->path.pkey = cpu_to_be16(token);
+ target->pkey = cpu_to_be16(token);
break;
case SRP_OPT_SERVICE_ID:
goto out;
}
target->service_id = cpu_to_be64(simple_strtoull(p, NULL, 16));
- target->path.service_id = target->service_id;
kfree(p);
break;
container_of(dev, struct srp_host, dev);
struct Scsi_Host *target_host;
struct srp_target_port *target;
+ struct srp_rdma_ch *ch;
struct srp_device *srp_dev = host->srp_dev;
struct ib_device *ibdev = srp_dev->dev;
- int ret;
+ int ret, node_idx, node, cpu, i;
+ bool multich = false;
target_host = scsi_host_alloc(&srp_template,
sizeof (struct srp_target_port));
target->tl_retry_count = 7;
target->queue_size = SRP_DEFAULT_QUEUE_SIZE;
+ /*
+ * Avoid that the SCSI host can be removed by srp_remove_target()
+ * before this function returns.
+ */
+ scsi_host_get(target->scsi_host);
+
mutex_lock(&host->add_target_mutex);
ret = srp_parse_options(buf, target);
if (ret)
goto err;
+ ret = scsi_init_shared_tag_map(target_host, target_host->can_queue);
+ if (ret)
+ goto err;
+
target->req_ring_size = target->queue_size - SRP_TSK_MGMT_SQ_SIZE;
if (!srp_conn_unique(target->srp_host, target)) {
INIT_WORK(&target->tl_err_work, srp_tl_err_work);
INIT_WORK(&target->remove_work, srp_remove_work);
spin_lock_init(&target->lock);
- INIT_LIST_HEAD(&target->free_tx);
- ret = srp_alloc_req_data(target);
+ ret = ib_query_gid(ibdev, host->port, 0, &target->sgid);
if (ret)
- goto err_free_mem;
+ goto err;
- ret = ib_query_gid(ibdev, host->port, 0, &target->path.sgid);
- if (ret)
- goto err_free_mem;
+ ret = -ENOMEM;
+ target->ch_count = max_t(unsigned, num_online_nodes(),
+ min(ch_count ? :
+ min(4 * num_online_nodes(),
+ ibdev->num_comp_vectors),
+ num_online_cpus()));
+ target->ch = kcalloc(target->ch_count, sizeof(*target->ch),
+ GFP_KERNEL);
+ if (!target->ch)
+ goto err;
- ret = srp_create_target_ib(target);
- if (ret)
- goto err_free_mem;
+ node_idx = 0;
+ for_each_online_node(node) {
+ const int ch_start = (node_idx * target->ch_count /
+ num_online_nodes());
+ const int ch_end = ((node_idx + 1) * target->ch_count /
+ num_online_nodes());
+ const int cv_start = (node_idx * ibdev->num_comp_vectors /
+ num_online_nodes() + target->comp_vector)
+ % ibdev->num_comp_vectors;
+ const int cv_end = ((node_idx + 1) * ibdev->num_comp_vectors /
+ num_online_nodes() + target->comp_vector)
+ % ibdev->num_comp_vectors;
+ int cpu_idx = 0;
+
+ for_each_online_cpu(cpu) {
+ if (cpu_to_node(cpu) != node)
+ continue;
+ if (ch_start + cpu_idx >= ch_end)
+ continue;
+ ch = &target->ch[ch_start + cpu_idx];
+ ch->target = target;
+ ch->comp_vector = cv_start == cv_end ? cv_start :
+ cv_start + cpu_idx % (cv_end - cv_start);
+ spin_lock_init(&ch->lock);
+ INIT_LIST_HEAD(&ch->free_tx);
+ ret = srp_new_cm_id(ch);
+ if (ret)
+ goto err_disconnect;
- ret = srp_new_cm_id(target);
- if (ret)
- goto err_free_ib;
+ ret = srp_create_ch_ib(ch);
+ if (ret)
+ goto err_disconnect;
- ret = srp_connect_target(target);
- if (ret) {
- shost_printk(KERN_ERR, target->scsi_host,
- PFX "Connection failed\n");
- goto err_cm_id;
+ ret = srp_alloc_req_data(ch);
+ if (ret)
+ goto err_disconnect;
+
+ ret = srp_connect_ch(ch, multich);
+ if (ret) {
+ shost_printk(KERN_ERR, target->scsi_host,
+ PFX "Connection %d/%d failed\n",
+ ch_start + cpu_idx,
+ target->ch_count);
+ if (node_idx == 0 && cpu_idx == 0) {
+ goto err_disconnect;
+ } else {
+ srp_free_ch_ib(target, ch);
+ srp_free_req_data(target, ch);
+ target->ch_count = ch - target->ch;
+ break;
+ }
+ }
+
+ multich = true;
+ cpu_idx++;
+ }
+ node_idx++;
}
+ target->scsi_host->nr_hw_queues = target->ch_count;
+
ret = srp_add_target(host, target);
if (ret)
goto err_disconnect;
- shost_printk(KERN_DEBUG, target->scsi_host, PFX
- "new target: id_ext %016llx ioc_guid %016llx pkey %04x service_id %016llx sgid %pI6 dgid %pI6\n",
- be64_to_cpu(target->id_ext),
- be64_to_cpu(target->ioc_guid),
- be16_to_cpu(target->path.pkey),
- be64_to_cpu(target->service_id),
- target->path.sgid.raw, target->path.dgid.raw);
+ if (target->state != SRP_TARGET_REMOVED) {
+ shost_printk(KERN_DEBUG, target->scsi_host, PFX
+ "new target: id_ext %016llx ioc_guid %016llx pkey %04x service_id %016llx sgid %pI6 dgid %pI6\n",
+ be64_to_cpu(target->id_ext),
+ be64_to_cpu(target->ioc_guid),
+ be16_to_cpu(target->pkey),
+ be64_to_cpu(target->service_id),
+ target->sgid.raw, target->orig_dgid.raw);
+ }
ret = count;
out:
mutex_unlock(&host->add_target_mutex);
+
+ scsi_host_put(target->scsi_host);
+
return ret;
err_disconnect:
srp_disconnect_target(target);
-err_cm_id:
- ib_destroy_cm_id(target->cm_id);
-
-err_free_ib:
- srp_free_target_ib(target);
+ for (i = 0; i < target->ch_count; i++) {
+ ch = &target->ch[i];
+ srp_free_ch_ib(target, ch);
+ srp_free_req_data(target, ch);
+ }
-err_free_mem:
- srp_free_req_data(target);
+ kfree(target->ch);
err:
scsi_host_put(target_host);
LOCAL_INV_WR_ID_MASK = 1,
FAST_REG_WR_ID_MASK = 2,
+
+ SRP_LAST_WR_ID = 0xfffffffcU,
};
enum srp_target_state {
+ SRP_TARGET_SCANNING,
SRP_TARGET_LIVE,
SRP_TARGET_REMOVED,
};
};
struct srp_request {
- struct list_head list;
struct scsi_cmnd *scmnd;
struct srp_iu *cmd;
union {
struct srp_direct_buf *indirect_desc;
dma_addr_t indirect_dma_addr;
short nmdesc;
- short index;
};
-struct srp_target_port {
+/**
+ * struct srp_rdma_ch
+ * @comp_vector: Completion vector used by this RDMA channel.
+ */
+struct srp_rdma_ch {
/* These are RW in the hot path, and commonly used together */
struct list_head free_tx;
- struct list_head free_reqs;
spinlock_t lock;
s32 req_lim;
/* These are read-only in the hot path */
- struct ib_cq *send_cq ____cacheline_aligned_in_smp;
+ struct srp_target_port *target ____cacheline_aligned_in_smp;
+ struct ib_cq *send_cq;
struct ib_cq *recv_cq;
struct ib_qp *qp;
union {
struct ib_fmr_pool *fmr_pool;
struct srp_fr_pool *fr_pool;
};
+
+ /* Everything above this point is used in the hot path of
+ * command processing. Try to keep them packed into cachelines.
+ */
+
+ struct completion done;
+ int status;
+
+ struct ib_sa_path_rec path;
+ struct ib_sa_query *path_query;
+ int path_query_id;
+
+ struct ib_cm_id *cm_id;
+ struct srp_iu **tx_ring;
+ struct srp_iu **rx_ring;
+ struct srp_request *req_ring;
+ int max_ti_iu_len;
+ int comp_vector;
+
+ struct completion tsk_mgmt_done;
+ u8 tsk_mgmt_status;
+};
+
+/**
+ * struct srp_target_port
+ * @comp_vector: Completion vector used by the first RDMA channel created for
+ * this target port.
+ */
+struct srp_target_port {
+ /* read and written in the hot path */
+ spinlock_t lock;
+
+ /* read only in the hot path */
+ struct srp_rdma_ch *ch;
+ u32 ch_count;
u32 lkey;
u32 rkey;
enum srp_target_state state;
unsigned int indirect_size;
bool allow_ext_sg;
- /* Everything above this point is used in the hot path of
- * command processing. Try to keep them packed into cachelines.
- */
-
+ /* other member variables */
+ union ib_gid sgid;
__be64 id_ext;
__be64 ioc_guid;
__be64 service_id;
int comp_vector;
int tl_retry_count;
- struct ib_sa_path_rec path;
- __be16 orig_dgid[8];
- struct ib_sa_query *path_query;
- int path_query_id;
+ union ib_gid orig_dgid;
+ __be16 pkey;
u32 rq_tmo_jiffies;
bool connected;
- struct ib_cm_id *cm_id;
-
- int max_ti_iu_len;
-
int zero_req_lim;
- struct srp_iu **tx_ring;
- struct srp_iu **rx_ring;
- struct srp_request *req_ring;
-
struct work_struct tl_err_work;
struct work_struct remove_work;
struct list_head list;
- struct completion done;
- int status;
bool qp_in_error;
-
- struct completion tsk_mgmt_done;
- u8 tsk_mgmt_status;
};
struct srp_iu {
if (!qp_init)
goto out;
+retry:
ch->cq = ib_create_cq(sdev->device, srpt_completion, NULL, ch,
ch->rq_size + srp_sq_size, 0);
if (IS_ERR(ch->cq)) {
ch->qp = ib_create_qp(sdev->pd, qp_init);
if (IS_ERR(ch->qp)) {
ret = PTR_ERR(ch->qp);
+ if (ret == -ENOMEM) {
+ srp_sq_size /= 2;
+ if (srp_sq_size >= MIN_SRPT_SQ_SIZE) {
+ ib_destroy_cq(ch->cq);
+ goto retry;
+ }
+ }
printk(KERN_ERR "failed to create_qp ret= %d\n", ret);
goto err_destroy_cq;
}
err_free_client:
evdev_detach_client(evdev, client);
- kfree(client);
+ kvfree(client);
return error;
}
}
ep_irq_in = &intf->cur_altsetting->endpoint[1].desc;
- usb_fill_bulk_urb(xpad->bulk_out, udev,
- usb_sndbulkpipe(udev, ep_irq_in->bEndpointAddress),
- xpad->bdata, XPAD_PKT_LEN, xpad_bulk_out, xpad);
+ if (usb_endpoint_is_bulk_out(ep_irq_in)) {
+ usb_fill_bulk_urb(xpad->bulk_out, udev,
+ usb_sndbulkpipe(udev,
+ ep_irq_in->bEndpointAddress),
+ xpad->bdata, XPAD_PKT_LEN,
+ xpad_bulk_out, xpad);
+ } else {
+ usb_fill_int_urb(xpad->bulk_out, udev,
+ usb_sndintpipe(udev,
+ ep_irq_in->bEndpointAddress),
+ xpad->bdata, XPAD_PKT_LEN,
+ xpad_bulk_out, xpad, 0);
+ }
/*
* Submit the int URB immediately rather than waiting for open
opencores_kbd->addr = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(opencores_kbd->addr))
- error = PTR_ERR(opencores_kbd->addr);
+ return PTR_ERR(opencores_kbd->addr);
input->name = pdev->name;
input->phys = "opencores-kbd/input0";
.max_cols = 8,
.max_rows = 12,
.col_gpios = 0x0000ff, /* GPIO 0 - 7*/
- .row_gpios = 0x1fef00, /* GPIO 8-14, 16-20 */
+ .row_gpios = 0x1f7f00, /* GPIO 8-14, 16-20 */
},
[STMPE2403] = {
.auto_increment = true,
pcu->ofn_reg_addr = value;
mutex_unlock(&pcu->cmd_mutex);
- return error ?: count;
+ return count;
}
static DEVICE_ATTR(reg_addr, S_IRUGO | S_IWUSR,
struct ff_effect *effect)
{
struct max77693_haptic *haptic = input_get_drvdata(dev);
- uint64_t period_mag_multi;
+ u64 period_mag_multi;
haptic->magnitude = effect->u.rumble.strong_magnitude;
if (!haptic->magnitude)
* The formula to convert magnitude to pwm_duty as follows:
* - pwm_duty = (magnitude * pwm_period) / MAX_MAGNITUDE(0xFFFF)
*/
- period_mag_multi = (int64_t)(haptic->pwm_dev->period *
- haptic->magnitude);
+ period_mag_multi = (u64)haptic->pwm_dev->period * haptic->magnitude;
haptic->pwm_duty = (unsigned int)(period_mag_multi >>
MAX_MAGNITUDE_SHIFT);
struct gpio_desc *desc;
int gpio;
- desc = gpiod_get_index(dev, KBUILD_MODNAME, acpi_index);
+ desc = gpiod_get_index(dev, KBUILD_MODNAME, acpi_index, GPIOD_ASIS);
if (IS_ERR(desc))
return PTR_ERR(desc);
}
platform_set_drvdata(pdev, pwr);
+ device_init_wakeup(&pdev->dev, true);
return 0;
}
{
struct alps_data *priv = psmouse->private;
- if ((psmouse->packet[0] & 0xc8) == 0x08) { /* PS/2 packet */
+ /*
+ * Check if we are dealing with a bare PS/2 packet, presumably from
+ * a device connected to the external PS/2 port. Because bare PS/2
+ * protocol does not have enough constant bits to self-synchronize
+ * properly we only do this if the device is fully synchronized.
+ */
+ if (!psmouse->out_of_sync_cnt && (psmouse->packet[0] & 0xc8) == 0x08) {
if (psmouse->pktcnt == 3) {
alps_report_bare_ps2_packet(psmouse, psmouse->packet,
true);
}
/* Bytes 2 - pktsize should have 0 in the highest bit */
- if ((priv->proto_version < ALPS_PROTO_V5) &&
+ if (priv->proto_version < ALPS_PROTO_V5 &&
psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize &&
(psmouse->packet[psmouse->pktcnt - 1] & 0x80)) {
psmouse_dbg(psmouse, "refusing packet[%i] = %x\n",
psmouse->pktcnt - 1,
psmouse->packet[psmouse->pktcnt - 1]);
+
+ if (priv->proto_version == ALPS_PROTO_V3 &&
+ psmouse->pktcnt == psmouse->pktsize) {
+ /*
+ * Some Dell boxes, such as Latitude E6440 or E7440
+ * with closed lid, quite often smash last byte of
+ * otherwise valid packet with 0xff. Given that the
+ * next packet is very likely to be valid let's
+ * report PSMOUSE_FULL_PACKET but not process data,
+ * rather than reporting PSMOUSE_BAD_DATA and
+ * filling the logs.
+ */
+ return PSMOUSE_FULL_PACKET;
+ }
+
return PSMOUSE_BAD_DATA;
}
/* We are having trouble resyncing ALPS touchpads so disable it for now */
psmouse->resync_time = 0;
+ /* Allow 2 invalid packets without resetting device */
+ psmouse->resetafter = psmouse->pktsize * 2;
+
return 0;
init_fail:
int x, y;
u32 t;
- if (dev_WARN_ONCE(&psmouse->ps2dev.serio->dev,
- !tp_dev,
- psmouse_fmt("Unexpected trackpoint message\n"))) {
- if (etd->debug == 1)
- elantech_packet_dump(psmouse);
- return;
- }
-
t = get_unaligned_le32(&packet[0]);
switch (t & ~7U) {
} else {
input_report_key(dev, BTN_LEFT, packet[0] & 0x01);
input_report_key(dev, BTN_RIGHT, packet[0] & 0x02);
+ input_report_key(dev, BTN_MIDDLE, packet[0] & 0x04);
}
input_mt_report_pointer_emulation(dev, true);
unsigned char packet_type = packet[3] & 0x03;
bool sanity_check;
+ if (etd->tp_dev && (packet[3] & 0x0f) == 0x06)
+ return PACKET_TRACKPOINT;
+
/*
* Sanity check based on the constant bits of a packet.
* The constant bits change depending on the value of
case 4:
packet_type = elantech_packet_check_v4(psmouse);
- if (packet_type == PACKET_UNKNOWN)
+ switch (packet_type) {
+ case PACKET_UNKNOWN:
return PSMOUSE_BAD_DATA;
- elantech_report_absolute_v4(psmouse, packet_type);
+ case PACKET_TRACKPOINT:
+ elantech_report_trackpoint(psmouse, packet_type);
+ break;
+
+ default:
+ elantech_report_absolute_v4(psmouse, packet_type);
+ break;
+ }
+
break;
}
}
}
+/*
+ * Some hw_version 4 models do have a middle button
+ */
+static const struct dmi_system_id elantech_dmi_has_middle_button[] = {
+#if defined(CONFIG_DMI) && defined(CONFIG_X86)
+ {
+ /* Fujitsu H730 has a middle button */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H730"),
+ },
+ },
+#endif
+ { }
+};
+
/*
* Set the appropriate event bits for the input subsystem
*/
__clear_bit(EV_REL, dev->evbit);
__set_bit(BTN_LEFT, dev->keybit);
+ if (dmi_check_system(elantech_dmi_has_middle_button))
+ __set_bit(BTN_MIDDLE, dev->keybit);
__set_bit(BTN_RIGHT, dev->keybit);
__set_bit(BTN_TOUCH, dev->keybit);
ELANTECH_INT_ATTR(reg_26, 0x26);
ELANTECH_INT_ATTR(debug, 0);
ELANTECH_INT_ATTR(paritycheck, 0);
+ELANTECH_INT_ATTR(crc_enabled, 0);
static struct attribute *elantech_attrs[] = {
&psmouse_attr_reg_07.dattr.attr,
&psmouse_attr_reg_26.dattr.attr,
&psmouse_attr_debug.dattr.attr,
&psmouse_attr_paritycheck.dattr.attr,
+ &psmouse_attr_crc_enabled.dattr.attr,
NULL
};
return 0;
}
+/*
+ * Some hw_version 4 models do not work with crc_disabled
+ */
+static const struct dmi_system_id elantech_dmi_force_crc_enabled[] = {
+#if defined(CONFIG_DMI) && defined(CONFIG_X86)
+ {
+ /* Fujitsu H730 does not work with crc_enabled == 0 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "CELSIUS H730"),
+ },
+ },
+#endif
+ { }
+};
+
/*
* Some hw_version 3 models go into error state when we try to set
* bit 3 and/or bit 1 of r10.
* The signatures of v3 and v4 packets change depending on the
* value of this hardware flag.
*/
- etd->crc_enabled = ((etd->fw_version & 0x4000) == 0x4000);
+ etd->crc_enabled = (etd->fw_version & 0x4000) == 0x4000 ||
+ dmi_check_system(elantech_dmi_force_crc_enabled);
/* Enable real hardware resolution on hw_version 3 ? */
etd->set_hw_resolution = !dmi_check_system(no_hw_res_dmi_table);
{
struct psmouse *psmouse = serio_get_drvdata(serio);
struct psmouse *parent = NULL;
- struct serio_driver *drv = serio->drv;
unsigned char type;
int rc = -1;
- if (!drv || !psmouse) {
- psmouse_dbg(psmouse,
- "reconnect request, but serio is disconnected, ignoring...\n");
- return -1;
- }
-
mutex_lock(&psmouse_mutex);
if (serio->parent && serio->id.type == SERIO_PS_PSTHRU) {
1232, 5710, 1156, 4696
},
{
- (const char * const []){"LEN0034", "LEN0036", "LEN2002",
- "LEN2004", NULL},
+ (const char * const []){"LEN0034", "LEN0036", "LEN0039",
+ "LEN2002", "LEN2004", NULL},
1024, 5112, 2024, 4832
},
{
(const char * const []){"LEN2001", NULL},
1024, 5022, 2508, 4832
},
+ {
+ (const char * const []){"LEN2006", NULL},
+ 1264, 5675, 1171, 4688
+ },
{ }
};
"LEN0036", /* T440 */
"LEN0037",
"LEN0038",
+ "LEN0039", /* T440s */
"LEN0041",
"LEN0042", /* Yoga */
"LEN0045",
if (num >= mouse->count) {
mouse->count = 0;
} else {
- memmove(mouse->buf, mouse->buf + num - 1, BUFLEN - num);
+ memmove(mouse->buf, mouse->buf + num, BUFLEN - num);
mouse->count -= num;
}
}
{
struct ps2if *ps2if = dev_id;
unsigned int status;
- int handled = IRQ_NONE;
+ irqreturn_t handled = IRQ_NONE;
while ((status = readl(ps2if->base)) & 0xffff0000) {
serio_interrupt(ps2if->io, status & 0xff, 0);
{
struct ps2if *ps2if = io->port_data;
- writel(0, ps2if->base); /* disable rx irq */
+ writel(0, ps2if->base + 4); /* disable rx irq */
}
/*
};
/*
- * Some laptops do implement active multiplexing mode correctly;
- * unfortunately they are in minority.
+ * Some Fujitsu notebooks are having trouble with touchpads if
+ * active multiplexing mode is activated. Luckily they don't have
+ * external PS/2 ports so we can safely disable it.
+ * ... apparently some Toshibas don't like MUX mode either and
+ * die horrible death on reboot.
*/
-static const struct dmi_system_id __initconst i8042_dmi_mux_table[] = {
+static const struct dmi_system_id __initconst i8042_dmi_nomux_table[] = {
+ {
+ /* Fujitsu Lifebook P7010/P7010D */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "P7010"),
+ },
+ },
+ {
+ /* Fujitsu Lifebook P7010 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "0000000000"),
+ },
+ },
+ {
+ /* Fujitsu Lifebook P5020D */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook P Series"),
+ },
+ },
+ {
+ /* Fujitsu Lifebook S2000 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook S Series"),
+ },
+ },
+ {
+ /* Fujitsu Lifebook S6230 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook S6230"),
+ },
+ },
+ {
+ /* Fujitsu T70H */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "FMVLT70H"),
+ },
+ },
+ {
+ /* Fujitsu-Siemens Lifebook T3010 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK T3010"),
+ },
+ },
+ {
+ /* Fujitsu-Siemens Lifebook E4010 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK E4010"),
+ },
+ },
+ {
+ /* Fujitsu-Siemens Amilo Pro 2010 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Pro V2010"),
+ },
+ },
+ {
+ /* Fujitsu-Siemens Amilo Pro 2030 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO PRO V2030"),
+ },
+ },
+ {
+ /*
+ * No data is coming from the touchscreen unless KBC
+ * is in legacy mode.
+ */
+ /* Panasonic CF-29 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Matsushita"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "CF-29"),
+ },
+ },
+ {
+ /*
+ * HP Pavilion DV4017EA -
+ * errors on MUX ports are reported without raising AUXDATA
+ * causing "spurious NAK" messages.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion dv4000 (EA032EA#ABF)"),
+ },
+ },
+ {
+ /*
+ * HP Pavilion ZT1000 -
+ * like DV4017EA does not raise AUXERR for errors on MUX ports.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion Notebook PC"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "HP Pavilion Notebook ZT1000"),
+ },
+ },
+ {
+ /*
+ * HP Pavilion DV4270ca -
+ * like DV4017EA does not raise AUXERR for errors on MUX ports.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Pavilion dv4000 (EH476UA#ABL)"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Satellite P10"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "EQUIUM A110"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "SATELLITE C850D"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ALIENWARE"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Sentia"),
+ },
+ },
+ {
+ /* Sharp Actius MM20 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SHARP"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "PC-MM20 Series"),
+ },
+ },
+ {
+ /* Sony Vaio FS-115b */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FS115B"),
+ },
+ },
+ {
+ /*
+ * Sony Vaio FZ-240E -
+ * reset and GET ID commands issued via KBD port are
+ * sometimes being delivered to AUX3.
+ */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FZ240E"),
+ },
+ },
{
/*
- * Panasonic CF-18 needs to be in MUX mode since the
- * touchscreen is on serio3 and it also has touchpad.
+ * Most (all?) VAIOs do not have external PS/2 ports nor
+ * they implement active multiplexing properly, and
+ * MUX discovery usually messes up keyboard/touchpad.
*/
.matches = {
- DMI_MATCH(DMI_PRODUCT_NAME, "CF-18"),
+ DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
+ DMI_MATCH(DMI_BOARD_NAME, "VAIO"),
+ },
+ },
+ {
+ /* Amoi M636/A737 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Amoi Electronics CO.,LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "M636/A737 platform"),
+ },
+ },
+ {
+ /* Lenovo 3000 n100 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "076804U"),
+ },
+ },
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 1360"),
+ },
+ },
+ {
+ /* Acer Aspire 5710 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5710"),
+ },
+ },
+ {
+ /* Gericom Bellagio */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Gericom"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "N34AS6"),
+ },
+ },
+ {
+ /* IBM 2656 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "2656"),
+ },
+ },
+ {
+ /* Dell XPS M1530 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "XPS M1530"),
+ },
+ },
+ {
+ /* Compal HEL80I */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "COMPAL"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HEL80I"),
+ },
+ },
+ {
+ /* Dell Vostro 1510 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Vostro1510"),
+ },
+ },
+ {
+ /* Acer Aspire 5536 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5536"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "0100"),
+ },
+ },
+ {
+ /* Dell Vostro V13 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Vostro V13"),
+ },
+ },
+ {
+ /* Newer HP Pavilion dv4 models */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4 Notebook PC"),
+ },
+ },
+ {
+ /* Asus X450LCP */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X450LCP"),
+ },
+ },
+ {
+ /* Avatar AVIU-145A6 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Intel"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "IC4I"),
},
},
{ }
DMI_MATCH(DMI_PRODUCT_NAME, "HP Pavilion dv4 Notebook PC"),
},
},
+ {
+ /* Fujitsu A544 laptop */
+ /* https://bugzilla.redhat.com/show_bug.cgi?id=1111138 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK A544"),
+ },
+ },
+ {
+ /* Fujitsu AH544 laptop */
+ /* https://bugzilla.kernel.org/show_bug.cgi?id=69731 */
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "LIFEBOOK AH544"),
+ },
+ },
{
/* Fujitsu U574 laptop */
/* https://bugzilla.kernel.org/show_bug.cgi?id=69731 */
if (dmi_check_system(i8042_dmi_noloop_table))
i8042_noloop = true;
- if (dmi_check_system(i8042_dmi_mux_table))
- i8042_nomux = false;
+ if (dmi_check_system(i8042_dmi_nomux_table))
+ i8042_nomux = true;
if (dmi_check_system(i8042_dmi_notimeout_table))
i8042_notimeout = true;
module_param_named(noaux, i8042_noaux, bool, 0);
MODULE_PARM_DESC(noaux, "Do not probe or use AUX (mouse) port.");
-static bool i8042_nomux = true;
+static bool i8042_nomux;
module_param_named(nomux, i8042_nomux, bool, 0);
MODULE_PARM_DESC(nomux, "Do not check whether an active multiplexing controller is present.");
* Documentation/input/input-programming.txt for more details.
*/
-static int abs_x[3] = {350, 3900, 5};
+static int abs_x[3] = {150, 4000, 5};
module_param_array(abs_x, int, NULL, 0);
MODULE_PARM_DESC(abs_x, "Touchscreen absolute X min, max, fuzz");
-static int abs_y[3] = {320, 3750, 40};
+static int abs_y[3] = {200, 4000, 40};
module_param_array(abs_y, int, NULL, 0);
MODULE_PARM_DESC(abs_y, "Touchscreen absolute Y min, max, fuzz");
hardware included on Tegra SoCs.
config TEGRA_IOMMU_SMMU
- bool "Tegra SMMU IOMMU Support"
- depends on ARCH_TEGRA && TEGRA_AHB
+ bool "NVIDIA Tegra SMMU Support"
+ depends on ARCH_TEGRA
+ depends on TEGRA_AHB
+ depends on TEGRA_MC
select IOMMU_API
help
- Enables support for remapping discontiguous physical memory
- shared with the operating system into contiguous I/O virtual
- space through the SMMU (System Memory Management Unit)
- hardware included on Tegra SoCs.
+ This driver supports the IOMMU hardware (SMMU) found on NVIDIA Tegra
+ SoCs (Tegra30 up to Tegra124).
config EXYNOS_IOMMU
bool "Exynos IOMMU Support"
.detach_dev = amd_iommu_detach_device,
.map = amd_iommu_map,
.unmap = amd_iommu_unmap,
+ .map_sg = default_iommu_map_sg,
.iova_to_phys = amd_iommu_iova_to_phys,
.pgsize_bitmap = AMD_IOMMU_PGSIZES,
};
.detach_dev = arm_smmu_detach_dev,
.map = arm_smmu_map,
.unmap = arm_smmu_unmap,
+ .map_sg = default_iommu_map_sg,
.iova_to_phys = arm_smmu_iova_to_phys,
.add_device = arm_smmu_add_device,
.remove_device = arm_smmu_remove_device,
.detach_dev = exynos_iommu_detach_device,
.map = exynos_iommu_map,
.unmap = exynos_iommu_unmap,
+ .map_sg = default_iommu_map_sg,
.iova_to_phys = exynos_iommu_iova_to_phys,
.add_device = exynos_iommu_add_device,
.remove_device = exynos_iommu_remove_device,
.detach_dev = intel_iommu_detach_device,
.map = intel_iommu_map,
.unmap = intel_iommu_unmap,
+ .map_sg = default_iommu_map_sg,
.iova_to_phys = intel_iommu_iova_to_phys,
.add_device = intel_iommu_add_device,
.remove_device = intel_iommu_remove_device,
kfree(nb);
return err;
}
- return bus_for_each_dev(bus, NULL, &cb, add_iommu_group);
+
+ err = bus_for_each_dev(bus, NULL, &cb, add_iommu_group);
+ if (err) {
+ bus_unregister_notifier(bus, nb);
+ kfree(nb);
+ return err;
+ }
+
+ return 0;
}
/**
*/
int bus_set_iommu(struct bus_type *bus, const struct iommu_ops *ops)
{
+ int err;
+
if (bus->iommu_ops != NULL)
return -EBUSY;
bus->iommu_ops = ops;
/* Do IOMMU specific setup for this bus-type */
- return iommu_bus_init(bus, ops);
+ err = iommu_bus_init(bus, ops);
+ if (err)
+ bus->iommu_ops = NULL;
+
+ return err;
}
EXPORT_SYMBOL_GPL(bus_set_iommu);
}
EXPORT_SYMBOL_GPL(iommu_unmap);
+size_t default_iommu_map_sg(struct iommu_domain *domain, unsigned long iova,
+ struct scatterlist *sg, unsigned int nents, int prot)
+{
+ struct scatterlist *s;
+ size_t mapped = 0;
+ unsigned int i;
+ int ret;
+
+ for_each_sg(sg, s, nents, i) {
+ phys_addr_t phys = page_to_phys(sg_page(s));
+
+ /* We are mapping on page boundarys, so offset must be 0 */
+ if (s->offset)
+ goto out_err;
+
+ ret = iommu_map(domain, iova + mapped, phys, s->length, prot);
+ if (ret)
+ goto out_err;
+
+ mapped += s->length;
+ }
+
+ return mapped;
+
+out_err:
+ /* undo mappings already done */
+ iommu_unmap(domain, iova, mapped);
+
+ return 0;
+
+}
+EXPORT_SYMBOL_GPL(default_iommu_map_sg);
int iommu_domain_window_enable(struct iommu_domain *domain, u32 wnd_nr,
phys_addr_t paddr, u64 size, int prot)
.detach_dev = ipmmu_detach_device,
.map = ipmmu_map,
.unmap = ipmmu_unmap,
+ .map_sg = default_iommu_map_sg,
.iova_to_phys = ipmmu_iova_to_phys,
.add_device = ipmmu_add_device,
.remove_device = ipmmu_remove_device,
.detach_dev = msm_iommu_detach_dev,
.map = msm_iommu_map,
.unmap = msm_iommu_unmap,
+ .map_sg = default_iommu_map_sg,
.iova_to_phys = msm_iommu_iova_to_phys,
.pgsize_bitmap = MSM_IOMMU_PGSIZES,
};
.detach_dev = omap_iommu_detach_dev,
.map = omap_iommu_map,
.unmap = omap_iommu_unmap,
+ .map_sg = default_iommu_map_sg,
.iova_to_phys = omap_iommu_iova_to_phys,
.add_device = omap_iommu_add_device,
.remove_device = omap_iommu_remove_device,
.detach_dev = shmobile_iommu_detach_device,
.map = shmobile_iommu_map,
.unmap = shmobile_iommu_unmap,
+ .map_sg = default_iommu_map_sg,
.iova_to_phys = shmobile_iommu_iova_to_phys,
.add_device = shmobile_iommu_add_device,
.pgsize_bitmap = SZ_1M | SZ_64K | SZ_4K,
/*
- * IOMMU API for SMMU in Tegra30
+ * Copyright (C) 2011-2014 NVIDIA CORPORATION. All rights reserved.
*
- * Copyright (c) 2011-2013, NVIDIA CORPORATION. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
*/
-#define pr_fmt(fmt) "%s(): " fmt, __func__
-
#include <linux/err.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <linux/vmalloc.h>
-#include <linux/mm.h>
-#include <linux/pagemap.h>
-#include <linux/device.h>
-#include <linux/sched.h>
#include <linux/iommu.h>
-#include <linux/io.h>
+#include <linux/kernel.h>
#include <linux/of.h>
-#include <linux/of_iommu.h>
-#include <linux/debugfs.h>
-#include <linux/seq_file.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
#include <soc/tegra/ahb.h>
+#include <soc/tegra/mc.h>
-#include <asm/page.h>
-#include <asm/cacheflush.h>
-
-enum smmu_hwgrp {
- HWGRP_AFI,
- HWGRP_AVPC,
- HWGRP_DC,
- HWGRP_DCB,
- HWGRP_EPP,
- HWGRP_G2,
- HWGRP_HC,
- HWGRP_HDA,
- HWGRP_ISP,
- HWGRP_MPE,
- HWGRP_NV,
- HWGRP_NV2,
- HWGRP_PPCS,
- HWGRP_SATA,
- HWGRP_VDE,
- HWGRP_VI,
-
- HWGRP_COUNT,
-
- HWGRP_END = ~0,
-};
+struct tegra_smmu {
+ void __iomem *regs;
+ struct device *dev;
-#define HWG_AFI (1 << HWGRP_AFI)
-#define HWG_AVPC (1 << HWGRP_AVPC)
-#define HWG_DC (1 << HWGRP_DC)
-#define HWG_DCB (1 << HWGRP_DCB)
-#define HWG_EPP (1 << HWGRP_EPP)
-#define HWG_G2 (1 << HWGRP_G2)
-#define HWG_HC (1 << HWGRP_HC)
-#define HWG_HDA (1 << HWGRP_HDA)
-#define HWG_ISP (1 << HWGRP_ISP)
-#define HWG_MPE (1 << HWGRP_MPE)
-#define HWG_NV (1 << HWGRP_NV)
-#define HWG_NV2 (1 << HWGRP_NV2)
-#define HWG_PPCS (1 << HWGRP_PPCS)
-#define HWG_SATA (1 << HWGRP_SATA)
-#define HWG_VDE (1 << HWGRP_VDE)
-#define HWG_VI (1 << HWGRP_VI)
-
-/* bitmap of the page sizes currently supported */
-#define SMMU_IOMMU_PGSIZES (SZ_4K)
-
-#define SMMU_CONFIG 0x10
-#define SMMU_CONFIG_DISABLE 0
-#define SMMU_CONFIG_ENABLE 1
-
-/* REVISIT: To support multiple MCs */
-enum {
- _MC = 0,
-};
+ struct tegra_mc *mc;
+ const struct tegra_smmu_soc *soc;
-enum {
- _TLB = 0,
- _PTC,
-};
+ unsigned long *asids;
+ struct mutex lock;
-#define SMMU_CACHE_CONFIG_BASE 0x14
-#define __SMMU_CACHE_CONFIG(mc, cache) (SMMU_CACHE_CONFIG_BASE + 4 * cache)
-#define SMMU_CACHE_CONFIG(cache) __SMMU_CACHE_CONFIG(_MC, cache)
-
-#define SMMU_CACHE_CONFIG_STATS_SHIFT 31
-#define SMMU_CACHE_CONFIG_STATS_ENABLE (1 << SMMU_CACHE_CONFIG_STATS_SHIFT)
-#define SMMU_CACHE_CONFIG_STATS_TEST_SHIFT 30
-#define SMMU_CACHE_CONFIG_STATS_TEST (1 << SMMU_CACHE_CONFIG_STATS_TEST_SHIFT)
-
-#define SMMU_TLB_CONFIG_HIT_UNDER_MISS__ENABLE (1 << 29)
-#define SMMU_TLB_CONFIG_ACTIVE_LINES__VALUE 0x10
-#define SMMU_TLB_CONFIG_RESET_VAL 0x20000010
-
-#define SMMU_PTC_CONFIG_CACHE__ENABLE (1 << 29)
-#define SMMU_PTC_CONFIG_INDEX_MAP__PATTERN 0x3f
-#define SMMU_PTC_CONFIG_RESET_VAL 0x2000003f
-
-#define SMMU_PTB_ASID 0x1c
-#define SMMU_PTB_ASID_CURRENT_SHIFT 0
-
-#define SMMU_PTB_DATA 0x20
-#define SMMU_PTB_DATA_RESET_VAL 0
-#define SMMU_PTB_DATA_ASID_NONSECURE_SHIFT 29
-#define SMMU_PTB_DATA_ASID_WRITABLE_SHIFT 30
-#define SMMU_PTB_DATA_ASID_READABLE_SHIFT 31
-
-#define SMMU_TLB_FLUSH 0x30
-#define SMMU_TLB_FLUSH_VA_MATCH_ALL 0
-#define SMMU_TLB_FLUSH_VA_MATCH_SECTION 2
-#define SMMU_TLB_FLUSH_VA_MATCH_GROUP 3
-#define SMMU_TLB_FLUSH_ASID_SHIFT 29
-#define SMMU_TLB_FLUSH_ASID_MATCH_DISABLE 0
-#define SMMU_TLB_FLUSH_ASID_MATCH_ENABLE 1
-#define SMMU_TLB_FLUSH_ASID_MATCH_SHIFT 31
-
-#define SMMU_PTC_FLUSH 0x34
-#define SMMU_PTC_FLUSH_TYPE_ALL 0
-#define SMMU_PTC_FLUSH_TYPE_ADR 1
-#define SMMU_PTC_FLUSH_ADR_SHIFT 4
-
-#define SMMU_ASID_SECURITY 0x38
-
-#define SMMU_STATS_CACHE_COUNT_BASE 0x1f0
-
-#define SMMU_STATS_CACHE_COUNT(mc, cache, hitmiss) \
- (SMMU_STATS_CACHE_COUNT_BASE + 8 * cache + 4 * hitmiss)
-
-#define SMMU_TRANSLATION_ENABLE_0 0x228
-#define SMMU_TRANSLATION_ENABLE_1 0x22c
-#define SMMU_TRANSLATION_ENABLE_2 0x230
-
-#define SMMU_AFI_ASID 0x238 /* PCIE */
-#define SMMU_AVPC_ASID 0x23c /* AVP */
-#define SMMU_DC_ASID 0x240 /* Display controller */
-#define SMMU_DCB_ASID 0x244 /* Display controller B */
-#define SMMU_EPP_ASID 0x248 /* Encoder pre-processor */
-#define SMMU_G2_ASID 0x24c /* 2D engine */
-#define SMMU_HC_ASID 0x250 /* Host1x */
-#define SMMU_HDA_ASID 0x254 /* High-def audio */
-#define SMMU_ISP_ASID 0x258 /* Image signal processor */
-#define SMMU_MPE_ASID 0x264 /* MPEG encoder */
-#define SMMU_NV_ASID 0x268 /* (3D) */
-#define SMMU_NV2_ASID 0x26c /* (3D) */
-#define SMMU_PPCS_ASID 0x270 /* AHB */
-#define SMMU_SATA_ASID 0x278 /* SATA */
-#define SMMU_VDE_ASID 0x27c /* Video decoder */
-#define SMMU_VI_ASID 0x280 /* Video input */
-
-#define SMMU_PDE_NEXT_SHIFT 28
-
-#define SMMU_TLB_FLUSH_VA_SECTION__MASK 0xffc00000
-#define SMMU_TLB_FLUSH_VA_SECTION__SHIFT 12 /* right shift */
-#define SMMU_TLB_FLUSH_VA_GROUP__MASK 0xffffc000
-#define SMMU_TLB_FLUSH_VA_GROUP__SHIFT 12 /* right shift */
-#define SMMU_TLB_FLUSH_VA(iova, which) \
- ((((iova) & SMMU_TLB_FLUSH_VA_##which##__MASK) >> \
- SMMU_TLB_FLUSH_VA_##which##__SHIFT) | \
- SMMU_TLB_FLUSH_VA_MATCH_##which)
-#define SMMU_PTB_ASID_CUR(n) \
- ((n) << SMMU_PTB_ASID_CURRENT_SHIFT)
-#define SMMU_TLB_FLUSH_ASID_MATCH_disable \
- (SMMU_TLB_FLUSH_ASID_MATCH_DISABLE << \
- SMMU_TLB_FLUSH_ASID_MATCH_SHIFT)
-#define SMMU_TLB_FLUSH_ASID_MATCH__ENABLE \
- (SMMU_TLB_FLUSH_ASID_MATCH_ENABLE << \
- SMMU_TLB_FLUSH_ASID_MATCH_SHIFT)
-
-#define SMMU_PAGE_SHIFT 12
-#define SMMU_PAGE_SIZE (1 << SMMU_PAGE_SHIFT)
-#define SMMU_PAGE_MASK ((1 << SMMU_PAGE_SHIFT) - 1)
-
-#define SMMU_PDIR_COUNT 1024
-#define SMMU_PDIR_SIZE (sizeof(unsigned long) * SMMU_PDIR_COUNT)
-#define SMMU_PTBL_COUNT 1024
-#define SMMU_PTBL_SIZE (sizeof(unsigned long) * SMMU_PTBL_COUNT)
-#define SMMU_PDIR_SHIFT 12
-#define SMMU_PDE_SHIFT 12
-#define SMMU_PTE_SHIFT 12
-#define SMMU_PFN_MASK 0x000fffff
-
-#define SMMU_ADDR_TO_PFN(addr) ((addr) >> 12)
-#define SMMU_ADDR_TO_PDN(addr) ((addr) >> 22)
-#define SMMU_PDN_TO_ADDR(pdn) ((pdn) << 22)
-
-#define _READABLE (1 << SMMU_PTB_DATA_ASID_READABLE_SHIFT)
-#define _WRITABLE (1 << SMMU_PTB_DATA_ASID_WRITABLE_SHIFT)
-#define _NONSECURE (1 << SMMU_PTB_DATA_ASID_NONSECURE_SHIFT)
-#define _PDE_NEXT (1 << SMMU_PDE_NEXT_SHIFT)
-#define _MASK_ATTR (_READABLE | _WRITABLE | _NONSECURE)
-
-#define _PDIR_ATTR (_READABLE | _WRITABLE | _NONSECURE)
-
-#define _PDE_ATTR (_READABLE | _WRITABLE | _NONSECURE)
-#define _PDE_ATTR_N (_PDE_ATTR | _PDE_NEXT)
-#define _PDE_VACANT(pdn) (((pdn) << 10) | _PDE_ATTR)
-
-#define _PTE_ATTR (_READABLE | _WRITABLE | _NONSECURE)
-#define _PTE_VACANT(addr) (((addr) >> SMMU_PAGE_SHIFT) | _PTE_ATTR)
-
-#define SMMU_MK_PDIR(page, attr) \
- ((page_to_phys(page) >> SMMU_PDIR_SHIFT) | (attr))
-#define SMMU_MK_PDE(page, attr) \
- (unsigned long)((page_to_phys(page) >> SMMU_PDE_SHIFT) | (attr))
-#define SMMU_EX_PTBL_PAGE(pde) \
- pfn_to_page((unsigned long)(pde) & SMMU_PFN_MASK)
-#define SMMU_PFN_TO_PTE(pfn, attr) (unsigned long)((pfn) | (attr))
-
-#define SMMU_ASID_ENABLE(asid) ((asid) | (1 << 31))
-#define SMMU_ASID_DISABLE 0
-#define SMMU_ASID_ASID(n) ((n) & ~SMMU_ASID_ENABLE(0))
-
-#define NUM_SMMU_REG_BANKS 3
-
-#define smmu_client_enable_hwgrp(c, m) smmu_client_set_hwgrp(c, m, 1)
-#define smmu_client_disable_hwgrp(c) smmu_client_set_hwgrp(c, 0, 0)
-#define __smmu_client_enable_hwgrp(c, m) __smmu_client_set_hwgrp(c, m, 1)
-#define __smmu_client_disable_hwgrp(c) __smmu_client_set_hwgrp(c, 0, 0)
-
-#define HWGRP_INIT(client) [HWGRP_##client] = SMMU_##client##_ASID
-
-static const u32 smmu_hwgrp_asid_reg[] = {
- HWGRP_INIT(AFI),
- HWGRP_INIT(AVPC),
- HWGRP_INIT(DC),
- HWGRP_INIT(DCB),
- HWGRP_INIT(EPP),
- HWGRP_INIT(G2),
- HWGRP_INIT(HC),
- HWGRP_INIT(HDA),
- HWGRP_INIT(ISP),
- HWGRP_INIT(MPE),
- HWGRP_INIT(NV),
- HWGRP_INIT(NV2),
- HWGRP_INIT(PPCS),
- HWGRP_INIT(SATA),
- HWGRP_INIT(VDE),
- HWGRP_INIT(VI),
+ struct list_head list;
};
-#define HWGRP_ASID_REG(x) (smmu_hwgrp_asid_reg[x])
-/*
- * Per client for address space
- */
-struct smmu_client {
- struct device *dev;
- struct list_head list;
- struct smmu_as *as;
- u32 hwgrp;
+struct tegra_smmu_as {
+ struct iommu_domain *domain;
+ struct tegra_smmu *smmu;
+ unsigned int use_count;
+ struct page *count;
+ struct page *pd;
+ unsigned id;
+ u32 attr;
};
-/*
- * Per address space
- */
-struct smmu_as {
- struct smmu_device *smmu; /* back pointer to container */
- unsigned int asid;
- spinlock_t lock; /* for pagetable */
- struct page *pdir_page;
- unsigned long pdir_attr;
- unsigned long pde_attr;
- unsigned long pte_attr;
- unsigned int *pte_count;
-
- struct list_head client;
- spinlock_t client_lock; /* for client list */
-};
+static inline void smmu_writel(struct tegra_smmu *smmu, u32 value,
+ unsigned long offset)
+{
+ writel(value, smmu->regs + offset);
+}
-struct smmu_debugfs_info {
- struct smmu_device *smmu;
- int mc;
- int cache;
-};
+static inline u32 smmu_readl(struct tegra_smmu *smmu, unsigned long offset)
+{
+ return readl(smmu->regs + offset);
+}
-/*
- * Per SMMU device - IOMMU device
- */
-struct smmu_device {
- void __iomem *regbase; /* register offset base */
- void __iomem **regs; /* register block start address array */
- void __iomem **rege; /* register block end address array */
- int nregs; /* number of register blocks */
-
- unsigned long iovmm_base; /* remappable base address */
- unsigned long page_count; /* total remappable size */
- spinlock_t lock;
- char *name;
- struct device *dev;
- struct page *avp_vector_page; /* dummy page shared by all AS's */
+#define SMMU_CONFIG 0x010
+#define SMMU_CONFIG_ENABLE (1 << 0)
- /*
- * Register image savers for suspend/resume
- */
- unsigned long translation_enable_0;
- unsigned long translation_enable_1;
- unsigned long translation_enable_2;
- unsigned long asid_security;
+#define SMMU_TLB_CONFIG 0x14
+#define SMMU_TLB_CONFIG_HIT_UNDER_MISS (1 << 29)
+#define SMMU_TLB_CONFIG_ROUND_ROBIN_ARBITRATION (1 << 28)
+#define SMMU_TLB_CONFIG_ACTIVE_LINES(x) ((x) & 0x3f)
- struct dentry *debugfs_root;
- struct smmu_debugfs_info *debugfs_info;
+#define SMMU_PTC_CONFIG 0x18
+#define SMMU_PTC_CONFIG_ENABLE (1 << 29)
+#define SMMU_PTC_CONFIG_REQ_LIMIT(x) (((x) & 0x0f) << 24)
+#define SMMU_PTC_CONFIG_INDEX_MAP(x) ((x) & 0x3f)
- struct device_node *ahb;
+#define SMMU_PTB_ASID 0x01c
+#define SMMU_PTB_ASID_VALUE(x) ((x) & 0x7f)
- int num_as;
- struct smmu_as as[0]; /* Run-time allocated array */
-};
+#define SMMU_PTB_DATA 0x020
+#define SMMU_PTB_DATA_VALUE(page, attr) (page_to_phys(page) >> 12 | (attr))
-static struct smmu_device *smmu_handle; /* unique for a system */
+#define SMMU_MK_PDE(page, attr) (page_to_phys(page) >> SMMU_PTE_SHIFT | (attr))
-/*
- * SMMU register accessors
- */
-static bool inline smmu_valid_reg(struct smmu_device *smmu,
- void __iomem *addr)
-{
- int i;
+#define SMMU_TLB_FLUSH 0x030
+#define SMMU_TLB_FLUSH_VA_MATCH_ALL (0 << 0)
+#define SMMU_TLB_FLUSH_VA_MATCH_SECTION (2 << 0)
+#define SMMU_TLB_FLUSH_VA_MATCH_GROUP (3 << 0)
+#define SMMU_TLB_FLUSH_ASID(x) (((x) & 0x7f) << 24)
+#define SMMU_TLB_FLUSH_VA_SECTION(addr) ((((addr) & 0xffc00000) >> 12) | \
+ SMMU_TLB_FLUSH_VA_MATCH_SECTION)
+#define SMMU_TLB_FLUSH_VA_GROUP(addr) ((((addr) & 0xffffc000) >> 12) | \
+ SMMU_TLB_FLUSH_VA_MATCH_GROUP)
+#define SMMU_TLB_FLUSH_ASID_MATCH (1 << 31)
- for (i = 0; i < smmu->nregs; i++) {
- if (addr < smmu->regs[i])
- break;
- if (addr <= smmu->rege[i])
- return true;
- }
+#define SMMU_PTC_FLUSH 0x034
+#define SMMU_PTC_FLUSH_TYPE_ALL (0 << 0)
+#define SMMU_PTC_FLUSH_TYPE_ADR (1 << 0)
- return false;
-}
+#define SMMU_PTC_FLUSH_HI 0x9b8
+#define SMMU_PTC_FLUSH_HI_MASK 0x3
-static inline u32 smmu_read(struct smmu_device *smmu, size_t offs)
-{
- void __iomem *addr = smmu->regbase + offs;
+/* per-SWGROUP SMMU_*_ASID register */
+#define SMMU_ASID_ENABLE (1 << 31)
+#define SMMU_ASID_MASK 0x7f
+#define SMMU_ASID_VALUE(x) ((x) & SMMU_ASID_MASK)
- BUG_ON(!smmu_valid_reg(smmu, addr));
+/* page table definitions */
+#define SMMU_NUM_PDE 1024
+#define SMMU_NUM_PTE 1024
- return readl(addr);
-}
+#define SMMU_SIZE_PD (SMMU_NUM_PDE * 4)
+#define SMMU_SIZE_PT (SMMU_NUM_PTE * 4)
-static inline void smmu_write(struct smmu_device *smmu, u32 val, size_t offs)
-{
- void __iomem *addr = smmu->regbase + offs;
+#define SMMU_PDE_SHIFT 22
+#define SMMU_PTE_SHIFT 12
- BUG_ON(!smmu_valid_reg(smmu, addr));
+#define SMMU_PFN_MASK 0x000fffff
- writel(val, addr);
-}
+#define SMMU_PD_READABLE (1 << 31)
+#define SMMU_PD_WRITABLE (1 << 30)
+#define SMMU_PD_NONSECURE (1 << 29)
-#define VA_PAGE_TO_PA(va, page) \
- (page_to_phys(page) + ((unsigned long)(va) & ~PAGE_MASK))
+#define SMMU_PDE_READABLE (1 << 31)
+#define SMMU_PDE_WRITABLE (1 << 30)
+#define SMMU_PDE_NONSECURE (1 << 29)
+#define SMMU_PDE_NEXT (1 << 28)
-#define FLUSH_CPU_DCACHE(va, page, size) \
- do { \
- unsigned long _pa_ = VA_PAGE_TO_PA(va, page); \
- __cpuc_flush_dcache_area((void *)(va), (size_t)(size)); \
- outer_flush_range(_pa_, _pa_+(size_t)(size)); \
- } while (0)
+#define SMMU_PTE_READABLE (1 << 31)
+#define SMMU_PTE_WRITABLE (1 << 30)
+#define SMMU_PTE_NONSECURE (1 << 29)
-/*
- * Any interaction between any block on PPSB and a block on APB or AHB
- * must have these read-back barriers to ensure the APB/AHB bus
- * transaction is complete before initiating activity on the PPSB
- * block.
- */
-#define FLUSH_SMMU_REGS(smmu) smmu_read(smmu, SMMU_CONFIG)
+#define SMMU_PDE_ATTR (SMMU_PDE_READABLE | SMMU_PDE_WRITABLE | \
+ SMMU_PDE_NONSECURE)
+#define SMMU_PTE_ATTR (SMMU_PTE_READABLE | SMMU_PTE_WRITABLE | \
+ SMMU_PTE_NONSECURE)
-#define smmu_client_hwgrp(c) (u32)((c)->dev->platform_data)
-
-static int __smmu_client_set_hwgrp(struct smmu_client *c,
- unsigned long map, int on)
+static inline void smmu_flush_ptc(struct tegra_smmu *smmu, struct page *page,
+ unsigned long offset)
{
- int i;
- struct smmu_as *as = c->as;
- u32 val, offs, mask = SMMU_ASID_ENABLE(as->asid);
- struct smmu_device *smmu = as->smmu;
-
- WARN_ON(!on && map);
- if (on && !map)
- return -EINVAL;
- if (!on)
- map = smmu_client_hwgrp(c);
-
- for_each_set_bit(i, &map, HWGRP_COUNT) {
- offs = HWGRP_ASID_REG(i);
- val = smmu_read(smmu, offs);
- if (on) {
- if (WARN_ON(val & mask))
- goto err_hw_busy;
- val |= mask;
- } else {
- WARN_ON((val & mask) == mask);
- val &= ~mask;
+ phys_addr_t phys = page ? page_to_phys(page) : 0;
+ u32 value;
+
+ if (page) {
+ offset &= ~(smmu->mc->soc->atom_size - 1);
+
+ if (smmu->mc->soc->num_address_bits > 32) {
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
+ value = (phys >> 32) & SMMU_PTC_FLUSH_HI_MASK;
+#else
+ value = 0;
+#endif
+ smmu_writel(smmu, value, SMMU_PTC_FLUSH_HI);
}
- smmu_write(smmu, val, offs);
- }
- FLUSH_SMMU_REGS(smmu);
- c->hwgrp = map;
- return 0;
-err_hw_busy:
- for_each_set_bit(i, &map, HWGRP_COUNT) {
- offs = HWGRP_ASID_REG(i);
- val = smmu_read(smmu, offs);
- val &= ~mask;
- smmu_write(smmu, val, offs);
+ value = (phys + offset) | SMMU_PTC_FLUSH_TYPE_ADR;
+ } else {
+ value = SMMU_PTC_FLUSH_TYPE_ALL;
}
- return -EBUSY;
+
+ smmu_writel(smmu, value, SMMU_PTC_FLUSH);
}
-static int smmu_client_set_hwgrp(struct smmu_client *c, u32 map, int on)
+static inline void smmu_flush_tlb(struct tegra_smmu *smmu)
{
- u32 val;
- unsigned long flags;
- struct smmu_as *as = c->as;
- struct smmu_device *smmu = as->smmu;
-
- spin_lock_irqsave(&smmu->lock, flags);
- val = __smmu_client_set_hwgrp(c, map, on);
- spin_unlock_irqrestore(&smmu->lock, flags);
- return val;
+ smmu_writel(smmu, SMMU_TLB_FLUSH_VA_MATCH_ALL, SMMU_TLB_FLUSH);
}
-/*
- * Flush all TLB entries and all PTC entries
- * Caller must lock smmu
- */
-static void smmu_flush_regs(struct smmu_device *smmu, int enable)
+static inline void smmu_flush_tlb_asid(struct tegra_smmu *smmu,
+ unsigned long asid)
{
- u32 val;
-
- smmu_write(smmu, SMMU_PTC_FLUSH_TYPE_ALL, SMMU_PTC_FLUSH);
- FLUSH_SMMU_REGS(smmu);
- val = SMMU_TLB_FLUSH_VA_MATCH_ALL |
- SMMU_TLB_FLUSH_ASID_MATCH_disable;
- smmu_write(smmu, val, SMMU_TLB_FLUSH);
+ u32 value;
- if (enable)
- smmu_write(smmu, SMMU_CONFIG_ENABLE, SMMU_CONFIG);
- FLUSH_SMMU_REGS(smmu);
+ value = SMMU_TLB_FLUSH_ASID_MATCH | SMMU_TLB_FLUSH_ASID(asid) |
+ SMMU_TLB_FLUSH_VA_MATCH_ALL;
+ smmu_writel(smmu, value, SMMU_TLB_FLUSH);
}
-static int smmu_setup_regs(struct smmu_device *smmu)
+static inline void smmu_flush_tlb_section(struct tegra_smmu *smmu,
+ unsigned long asid,
+ unsigned long iova)
{
- int i;
- u32 val;
+ u32 value;
- for (i = 0; i < smmu->num_as; i++) {
- struct smmu_as *as = &smmu->as[i];
- struct smmu_client *c;
-
- smmu_write(smmu, SMMU_PTB_ASID_CUR(as->asid), SMMU_PTB_ASID);
- val = as->pdir_page ?
- SMMU_MK_PDIR(as->pdir_page, as->pdir_attr) :
- SMMU_PTB_DATA_RESET_VAL;
- smmu_write(smmu, val, SMMU_PTB_DATA);
-
- list_for_each_entry(c, &as->client, list)
- __smmu_client_set_hwgrp(c, c->hwgrp, 1);
- }
-
- smmu_write(smmu, smmu->translation_enable_0, SMMU_TRANSLATION_ENABLE_0);
- smmu_write(smmu, smmu->translation_enable_1, SMMU_TRANSLATION_ENABLE_1);
- smmu_write(smmu, smmu->translation_enable_2, SMMU_TRANSLATION_ENABLE_2);
- smmu_write(smmu, smmu->asid_security, SMMU_ASID_SECURITY);
- smmu_write(smmu, SMMU_TLB_CONFIG_RESET_VAL, SMMU_CACHE_CONFIG(_TLB));
- smmu_write(smmu, SMMU_PTC_CONFIG_RESET_VAL, SMMU_CACHE_CONFIG(_PTC));
-
- smmu_flush_regs(smmu, 1);
-
- return tegra_ahb_enable_smmu(smmu->ahb);
+ value = SMMU_TLB_FLUSH_ASID_MATCH | SMMU_TLB_FLUSH_ASID(asid) |
+ SMMU_TLB_FLUSH_VA_SECTION(iova);
+ smmu_writel(smmu, value, SMMU_TLB_FLUSH);
}
-static void flush_ptc_and_tlb(struct smmu_device *smmu,
- struct smmu_as *as, dma_addr_t iova,
- unsigned long *pte, struct page *page, int is_pde)
+static inline void smmu_flush_tlb_group(struct tegra_smmu *smmu,
+ unsigned long asid,
+ unsigned long iova)
{
- u32 val;
- unsigned long tlb_flush_va = is_pde
- ? SMMU_TLB_FLUSH_VA(iova, SECTION)
- : SMMU_TLB_FLUSH_VA(iova, GROUP);
-
- val = SMMU_PTC_FLUSH_TYPE_ADR | VA_PAGE_TO_PA(pte, page);
- smmu_write(smmu, val, SMMU_PTC_FLUSH);
- FLUSH_SMMU_REGS(smmu);
- val = tlb_flush_va |
- SMMU_TLB_FLUSH_ASID_MATCH__ENABLE |
- (as->asid << SMMU_TLB_FLUSH_ASID_SHIFT);
- smmu_write(smmu, val, SMMU_TLB_FLUSH);
- FLUSH_SMMU_REGS(smmu);
-}
+ u32 value;
-static void free_ptbl(struct smmu_as *as, dma_addr_t iova)
-{
- unsigned long pdn = SMMU_ADDR_TO_PDN(iova);
- unsigned long *pdir = (unsigned long *)page_address(as->pdir_page);
-
- if (pdir[pdn] != _PDE_VACANT(pdn)) {
- dev_dbg(as->smmu->dev, "pdn: %lx\n", pdn);
-
- ClearPageReserved(SMMU_EX_PTBL_PAGE(pdir[pdn]));
- __free_page(SMMU_EX_PTBL_PAGE(pdir[pdn]));
- pdir[pdn] = _PDE_VACANT(pdn);
- FLUSH_CPU_DCACHE(&pdir[pdn], as->pdir_page, sizeof pdir[pdn]);
- flush_ptc_and_tlb(as->smmu, as, iova, &pdir[pdn],
- as->pdir_page, 1);
- }
+ value = SMMU_TLB_FLUSH_ASID_MATCH | SMMU_TLB_FLUSH_ASID(asid) |
+ SMMU_TLB_FLUSH_VA_GROUP(iova);
+ smmu_writel(smmu, value, SMMU_TLB_FLUSH);
}
-static void free_pdir(struct smmu_as *as)
+static inline void smmu_flush(struct tegra_smmu *smmu)
{
- unsigned addr;
- int count;
- struct device *dev = as->smmu->dev;
-
- if (!as->pdir_page)
- return;
-
- addr = as->smmu->iovmm_base;
- count = as->smmu->page_count;
- while (count-- > 0) {
- free_ptbl(as, addr);
- addr += SMMU_PAGE_SIZE * SMMU_PTBL_COUNT;
- }
- ClearPageReserved(as->pdir_page);
- __free_page(as->pdir_page);
- as->pdir_page = NULL;
- devm_kfree(dev, as->pte_count);
- as->pte_count = NULL;
+ smmu_readl(smmu, SMMU_CONFIG);
}
-/*
- * Maps PTBL for given iova and returns the PTE address
- * Caller must unmap the mapped PTBL returned in *ptbl_page_p
- */
-static unsigned long *locate_pte(struct smmu_as *as,
- dma_addr_t iova, bool allocate,
- struct page **ptbl_page_p,
- unsigned int **count)
+static int tegra_smmu_alloc_asid(struct tegra_smmu *smmu, unsigned int *idp)
{
- unsigned long ptn = SMMU_ADDR_TO_PFN(iova);
- unsigned long pdn = SMMU_ADDR_TO_PDN(iova);
- unsigned long *pdir = page_address(as->pdir_page);
- unsigned long *ptbl;
-
- if (pdir[pdn] != _PDE_VACANT(pdn)) {
- /* Mapped entry table already exists */
- *ptbl_page_p = SMMU_EX_PTBL_PAGE(pdir[pdn]);
- ptbl = page_address(*ptbl_page_p);
- } else if (!allocate) {
- return NULL;
- } else {
- int pn;
- unsigned long addr = SMMU_PDN_TO_ADDR(pdn);
+ unsigned long id;
- /* Vacant - allocate a new page table */
- dev_dbg(as->smmu->dev, "New PTBL pdn: %lx\n", pdn);
+ mutex_lock(&smmu->lock);
- *ptbl_page_p = alloc_page(GFP_ATOMIC);
- if (!*ptbl_page_p) {
- dev_err(as->smmu->dev,
- "failed to allocate smmu_device page table\n");
- return NULL;
- }
- SetPageReserved(*ptbl_page_p);
- ptbl = (unsigned long *)page_address(*ptbl_page_p);
- for (pn = 0; pn < SMMU_PTBL_COUNT;
- pn++, addr += SMMU_PAGE_SIZE) {
- ptbl[pn] = _PTE_VACANT(addr);
- }
- FLUSH_CPU_DCACHE(ptbl, *ptbl_page_p, SMMU_PTBL_SIZE);
- pdir[pdn] = SMMU_MK_PDE(*ptbl_page_p,
- as->pde_attr | _PDE_NEXT);
- FLUSH_CPU_DCACHE(&pdir[pdn], as->pdir_page, sizeof pdir[pdn]);
- flush_ptc_and_tlb(as->smmu, as, iova, &pdir[pdn],
- as->pdir_page, 1);
+ id = find_first_zero_bit(smmu->asids, smmu->soc->num_asids);
+ if (id >= smmu->soc->num_asids) {
+ mutex_unlock(&smmu->lock);
+ return -ENOSPC;
}
- *count = &as->pte_count[pdn];
- return &ptbl[ptn % SMMU_PTBL_COUNT];
+ set_bit(id, smmu->asids);
+ *idp = id;
+
+ mutex_unlock(&smmu->lock);
+ return 0;
}
-#ifdef CONFIG_SMMU_SIG_DEBUG
-static void put_signature(struct smmu_as *as,
- dma_addr_t iova, unsigned long pfn)
+static void tegra_smmu_free_asid(struct tegra_smmu *smmu, unsigned int id)
{
- struct page *page;
- unsigned long *vaddr;
-
- page = pfn_to_page(pfn);
- vaddr = page_address(page);
- if (!vaddr)
- return;
-
- vaddr[0] = iova;
- vaddr[1] = pfn << PAGE_SHIFT;
- FLUSH_CPU_DCACHE(vaddr, page, sizeof(vaddr[0]) * 2);
+ mutex_lock(&smmu->lock);
+ clear_bit(id, smmu->asids);
+ mutex_unlock(&smmu->lock);
}
-#else
-static inline void put_signature(struct smmu_as *as,
- unsigned long addr, unsigned long pfn)
+
+static bool tegra_smmu_capable(enum iommu_cap cap)
{
+ return false;
}
-#endif
-/*
- * Caller must not hold as->lock
- */
-static int alloc_pdir(struct smmu_as *as)
+static int tegra_smmu_domain_init(struct iommu_domain *domain)
{
- unsigned long *pdir, flags;
- int pdn, err = 0;
- u32 val;
- struct smmu_device *smmu = as->smmu;
- struct page *page;
- unsigned int *cnt;
+ struct tegra_smmu_as *as;
+ unsigned int i;
+ uint32_t *pd;
- /*
- * do the allocation, then grab as->lock
- */
- cnt = devm_kzalloc(smmu->dev,
- sizeof(cnt[0]) * SMMU_PDIR_COUNT,
- GFP_KERNEL);
- page = alloc_page(GFP_KERNEL | __GFP_DMA);
+ as = kzalloc(sizeof(*as), GFP_KERNEL);
+ if (!as)
+ return -ENOMEM;
- spin_lock_irqsave(&as->lock, flags);
+ as->attr = SMMU_PD_READABLE | SMMU_PD_WRITABLE | SMMU_PD_NONSECURE;
+ as->domain = domain;
- if (as->pdir_page) {
- /* We raced, free the redundant */
- err = -EAGAIN;
- goto err_out;
+ as->pd = alloc_page(GFP_KERNEL | __GFP_DMA);
+ if (!as->pd) {
+ kfree(as);
+ return -ENOMEM;
}
- if (!page || !cnt) {
- dev_err(smmu->dev, "failed to allocate at %s\n", __func__);
- err = -ENOMEM;
- goto err_out;
+ as->count = alloc_page(GFP_KERNEL);
+ if (!as->count) {
+ __free_page(as->pd);
+ kfree(as);
+ return -ENOMEM;
}
- as->pdir_page = page;
- as->pte_count = cnt;
+ /* clear PDEs */
+ pd = page_address(as->pd);
+ SetPageReserved(as->pd);
- SetPageReserved(as->pdir_page);
- pdir = page_address(as->pdir_page);
+ for (i = 0; i < SMMU_NUM_PDE; i++)
+ pd[i] = 0;
- for (pdn = 0; pdn < SMMU_PDIR_COUNT; pdn++)
- pdir[pdn] = _PDE_VACANT(pdn);
- FLUSH_CPU_DCACHE(pdir, as->pdir_page, SMMU_PDIR_SIZE);
- val = SMMU_PTC_FLUSH_TYPE_ADR | VA_PAGE_TO_PA(pdir, as->pdir_page);
- smmu_write(smmu, val, SMMU_PTC_FLUSH);
- FLUSH_SMMU_REGS(as->smmu);
- val = SMMU_TLB_FLUSH_VA_MATCH_ALL |
- SMMU_TLB_FLUSH_ASID_MATCH__ENABLE |
- (as->asid << SMMU_TLB_FLUSH_ASID_SHIFT);
- smmu_write(smmu, val, SMMU_TLB_FLUSH);
- FLUSH_SMMU_REGS(as->smmu);
+ /* clear PDE usage counters */
+ pd = page_address(as->count);
+ SetPageReserved(as->count);
- spin_unlock_irqrestore(&as->lock, flags);
-
- return 0;
+ for (i = 0; i < SMMU_NUM_PDE; i++)
+ pd[i] = 0;
-err_out:
- spin_unlock_irqrestore(&as->lock, flags);
+ domain->priv = as;
- devm_kfree(smmu->dev, cnt);
- if (page)
- __free_page(page);
- return err;
+ return 0;
}
-static void __smmu_iommu_unmap(struct smmu_as *as, dma_addr_t iova)
+static void tegra_smmu_domain_destroy(struct iommu_domain *domain)
{
- unsigned long *pte;
- struct page *page;
- unsigned int *count;
+ struct tegra_smmu_as *as = domain->priv;
- pte = locate_pte(as, iova, false, &page, &count);
- if (WARN_ON(!pte))
- return;
+ /* TODO: free page directory and page tables */
+ ClearPageReserved(as->pd);
- if (WARN_ON(*pte == _PTE_VACANT(iova)))
- return;
-
- *pte = _PTE_VACANT(iova);
- FLUSH_CPU_DCACHE(pte, page, sizeof(*pte));
- flush_ptc_and_tlb(as->smmu, as, iova, pte, page, 0);
- if (!--(*count))
- free_ptbl(as, iova);
+ kfree(as);
}
-static void __smmu_iommu_map_pfn(struct smmu_as *as, dma_addr_t iova,
- unsigned long pfn)
+static const struct tegra_smmu_swgroup *
+tegra_smmu_find_swgroup(struct tegra_smmu *smmu, unsigned int swgroup)
{
- struct smmu_device *smmu = as->smmu;
- unsigned long *pte;
- unsigned int *count;
- struct page *page;
+ const struct tegra_smmu_swgroup *group = NULL;
+ unsigned int i;
- pte = locate_pte(as, iova, true, &page, &count);
- if (WARN_ON(!pte))
- return;
+ for (i = 0; i < smmu->soc->num_swgroups; i++) {
+ if (smmu->soc->swgroups[i].swgroup == swgroup) {
+ group = &smmu->soc->swgroups[i];
+ break;
+ }
+ }
- if (*pte == _PTE_VACANT(iova))
- (*count)++;
- *pte = SMMU_PFN_TO_PTE(pfn, as->pte_attr);
- if (unlikely((*pte == _PTE_VACANT(iova))))
- (*count)--;
- FLUSH_CPU_DCACHE(pte, page, sizeof(*pte));
- flush_ptc_and_tlb(smmu, as, iova, pte, page, 0);
- put_signature(as, iova, pfn);
+ return group;
}
-static int smmu_iommu_map(struct iommu_domain *domain, unsigned long iova,
- phys_addr_t pa, size_t bytes, int prot)
+static void tegra_smmu_enable(struct tegra_smmu *smmu, unsigned int swgroup,
+ unsigned int asid)
{
- struct smmu_as *as = domain->priv;
- unsigned long pfn = __phys_to_pfn(pa);
- unsigned long flags;
+ const struct tegra_smmu_swgroup *group;
+ unsigned int i;
+ u32 value;
- dev_dbg(as->smmu->dev, "[%d] %08lx:%pa\n", as->asid, iova, &pa);
+ for (i = 0; i < smmu->soc->num_clients; i++) {
+ const struct tegra_mc_client *client = &smmu->soc->clients[i];
- if (!pfn_valid(pfn))
- return -ENOMEM;
-
- spin_lock_irqsave(&as->lock, flags);
- __smmu_iommu_map_pfn(as, iova, pfn);
- spin_unlock_irqrestore(&as->lock, flags);
- return 0;
-}
-
-static size_t smmu_iommu_unmap(struct iommu_domain *domain, unsigned long iova,
- size_t bytes)
-{
- struct smmu_as *as = domain->priv;
- unsigned long flags;
+ if (client->swgroup != swgroup)
+ continue;
- dev_dbg(as->smmu->dev, "[%d] %08lx\n", as->asid, iova);
+ value = smmu_readl(smmu, client->smmu.reg);
+ value |= BIT(client->smmu.bit);
+ smmu_writel(smmu, value, client->smmu.reg);
+ }
- spin_lock_irqsave(&as->lock, flags);
- __smmu_iommu_unmap(as, iova);
- spin_unlock_irqrestore(&as->lock, flags);
- return SMMU_PAGE_SIZE;
+ group = tegra_smmu_find_swgroup(smmu, swgroup);
+ if (group) {
+ value = smmu_readl(smmu, group->reg);
+ value &= ~SMMU_ASID_MASK;
+ value |= SMMU_ASID_VALUE(asid);
+ value |= SMMU_ASID_ENABLE;
+ smmu_writel(smmu, value, group->reg);
+ }
}
-static phys_addr_t smmu_iommu_iova_to_phys(struct iommu_domain *domain,
- dma_addr_t iova)
+static void tegra_smmu_disable(struct tegra_smmu *smmu, unsigned int swgroup,
+ unsigned int asid)
{
- struct smmu_as *as = domain->priv;
- unsigned long *pte;
- unsigned int *count;
- struct page *page;
- unsigned long pfn;
- unsigned long flags;
+ const struct tegra_smmu_swgroup *group;
+ unsigned int i;
+ u32 value;
- spin_lock_irqsave(&as->lock, flags);
+ group = tegra_smmu_find_swgroup(smmu, swgroup);
+ if (group) {
+ value = smmu_readl(smmu, group->reg);
+ value &= ~SMMU_ASID_MASK;
+ value |= SMMU_ASID_VALUE(asid);
+ value &= ~SMMU_ASID_ENABLE;
+ smmu_writel(smmu, value, group->reg);
+ }
- pte = locate_pte(as, iova, true, &page, &count);
- pfn = *pte & SMMU_PFN_MASK;
- WARN_ON(!pfn_valid(pfn));
- dev_dbg(as->smmu->dev,
- "iova:%08llx pfn:%08lx asid:%d\n", (unsigned long long)iova,
- pfn, as->asid);
+ for (i = 0; i < smmu->soc->num_clients; i++) {
+ const struct tegra_mc_client *client = &smmu->soc->clients[i];
- spin_unlock_irqrestore(&as->lock, flags);
- return PFN_PHYS(pfn);
-}
+ if (client->swgroup != swgroup)
+ continue;
-static bool smmu_iommu_capable(enum iommu_cap cap)
-{
- return false;
+ value = smmu_readl(smmu, client->smmu.reg);
+ value &= ~BIT(client->smmu.bit);
+ smmu_writel(smmu, value, client->smmu.reg);
+ }
}
-static int smmu_iommu_attach_dev(struct iommu_domain *domain,
- struct device *dev)
+static int tegra_smmu_as_prepare(struct tegra_smmu *smmu,
+ struct tegra_smmu_as *as)
{
- struct smmu_as *as = domain->priv;
- struct smmu_device *smmu = as->smmu;
- struct smmu_client *client, *c;
- u32 map;
+ u32 value;
int err;
- client = devm_kzalloc(smmu->dev, sizeof(*c), GFP_KERNEL);
- if (!client)
- return -ENOMEM;
- client->dev = dev;
- client->as = as;
- map = (unsigned long)dev->platform_data;
- if (!map)
- return -EINVAL;
-
- err = smmu_client_enable_hwgrp(client, map);
- if (err)
- goto err_hwgrp;
-
- spin_lock(&as->client_lock);
- list_for_each_entry(c, &as->client, list) {
- if (c->dev == dev) {
- dev_err(smmu->dev,
- "%s is already attached\n", dev_name(c->dev));
- err = -EINVAL;
- goto err_client;
- }
+ if (as->use_count > 0) {
+ as->use_count++;
+ return 0;
}
- list_add(&client->list, &as->client);
- spin_unlock(&as->client_lock);
- /*
- * Reserve "page zero" for AVP vectors using a common dummy
- * page.
- */
- if (map & HWG_AVPC) {
- struct page *page;
+ err = tegra_smmu_alloc_asid(smmu, &as->id);
+ if (err < 0)
+ return err;
- page = as->smmu->avp_vector_page;
- __smmu_iommu_map_pfn(as, 0, page_to_pfn(page));
+ smmu->soc->ops->flush_dcache(as->pd, 0, SMMU_SIZE_PD);
+ smmu_flush_ptc(smmu, as->pd, 0);
+ smmu_flush_tlb_asid(smmu, as->id);
- pr_info("Reserve \"page zero\" for AVP vectors using a common dummy\n");
- }
+ smmu_writel(smmu, as->id & 0x7f, SMMU_PTB_ASID);
+ value = SMMU_PTB_DATA_VALUE(as->pd, as->attr);
+ smmu_writel(smmu, value, SMMU_PTB_DATA);
+ smmu_flush(smmu);
- dev_dbg(smmu->dev, "%s is attached\n", dev_name(dev));
- return 0;
+ as->smmu = smmu;
+ as->use_count++;
-err_client:
- smmu_client_disable_hwgrp(client);
- spin_unlock(&as->client_lock);
-err_hwgrp:
- devm_kfree(smmu->dev, client);
- return err;
+ return 0;
}
-static void smmu_iommu_detach_dev(struct iommu_domain *domain,
- struct device *dev)
+static void tegra_smmu_as_unprepare(struct tegra_smmu *smmu,
+ struct tegra_smmu_as *as)
{
- struct smmu_as *as = domain->priv;
- struct smmu_device *smmu = as->smmu;
- struct smmu_client *c;
-
- spin_lock(&as->client_lock);
-
- list_for_each_entry(c, &as->client, list) {
- if (c->dev == dev) {
- smmu_client_disable_hwgrp(c);
- list_del(&c->list);
- devm_kfree(smmu->dev, c);
- c->as = NULL;
- dev_dbg(smmu->dev,
- "%s is detached\n", dev_name(c->dev));
- goto out;
- }
- }
- dev_err(smmu->dev, "Couldn't find %s\n", dev_name(dev));
-out:
- spin_unlock(&as->client_lock);
+ if (--as->use_count > 0)
+ return;
+
+ tegra_smmu_free_asid(smmu, as->id);
+ as->smmu = NULL;
}
-static int smmu_iommu_domain_init(struct iommu_domain *domain)
+static int tegra_smmu_attach_dev(struct iommu_domain *domain,
+ struct device *dev)
{
- int i, err = -EAGAIN;
- unsigned long flags;
- struct smmu_as *as;
- struct smmu_device *smmu = smmu_handle;
+ struct tegra_smmu *smmu = dev->archdata.iommu;
+ struct tegra_smmu_as *as = domain->priv;
+ struct device_node *np = dev->of_node;
+ struct of_phandle_args args;
+ unsigned int index = 0;
+ int err = 0;
- /* Look for a free AS with lock held */
- for (i = 0; i < smmu->num_as; i++) {
- as = &smmu->as[i];
+ while (!of_parse_phandle_with_args(np, "iommus", "#iommu-cells", index,
+ &args)) {
+ unsigned int swgroup = args.args[0];
- if (as->pdir_page)
+ if (args.np != smmu->dev->of_node) {
+ of_node_put(args.np);
continue;
+ }
- err = alloc_pdir(as);
- if (!err)
- goto found;
+ of_node_put(args.np);
- if (err != -EAGAIN)
- break;
+ err = tegra_smmu_as_prepare(smmu, as);
+ if (err < 0)
+ return err;
+
+ tegra_smmu_enable(smmu, swgroup, as->id);
+ index++;
}
- if (i == smmu->num_as)
- dev_err(smmu->dev, "no free AS\n");
- return err;
-found:
- spin_lock_irqsave(&smmu->lock, flags);
+ if (index == 0)
+ return -ENODEV;
- /* Update PDIR register */
- smmu_write(smmu, SMMU_PTB_ASID_CUR(as->asid), SMMU_PTB_ASID);
- smmu_write(smmu,
- SMMU_MK_PDIR(as->pdir_page, as->pdir_attr), SMMU_PTB_DATA);
- FLUSH_SMMU_REGS(smmu);
+ return 0;
+}
- spin_unlock_irqrestore(&smmu->lock, flags);
+static void tegra_smmu_detach_dev(struct iommu_domain *domain, struct device *dev)
+{
+ struct tegra_smmu_as *as = domain->priv;
+ struct device_node *np = dev->of_node;
+ struct tegra_smmu *smmu = as->smmu;
+ struct of_phandle_args args;
+ unsigned int index = 0;
- domain->priv = as;
+ while (!of_parse_phandle_with_args(np, "iommus", "#iommu-cells", index,
+ &args)) {
+ unsigned int swgroup = args.args[0];
- domain->geometry.aperture_start = smmu->iovmm_base;
- domain->geometry.aperture_end = smmu->iovmm_base +
- smmu->page_count * SMMU_PAGE_SIZE - 1;
- domain->geometry.force_aperture = true;
+ if (args.np != smmu->dev->of_node) {
+ of_node_put(args.np);
+ continue;
+ }
- dev_dbg(smmu->dev, "smmu_as@%p\n", as);
+ of_node_put(args.np);
- return 0;
+ tegra_smmu_disable(smmu, swgroup, as->id);
+ tegra_smmu_as_unprepare(smmu, as);
+ index++;
+ }
}
-static void smmu_iommu_domain_destroy(struct iommu_domain *domain)
+static u32 *as_get_pte(struct tegra_smmu_as *as, dma_addr_t iova,
+ struct page **pagep)
{
- struct smmu_as *as = domain->priv;
- struct smmu_device *smmu = as->smmu;
- unsigned long flags;
+ u32 *pd = page_address(as->pd), *pt, *count;
+ u32 pde = (iova >> SMMU_PDE_SHIFT) & 0x3ff;
+ u32 pte = (iova >> SMMU_PTE_SHIFT) & 0x3ff;
+ struct tegra_smmu *smmu = as->smmu;
+ struct page *page;
+ unsigned int i;
+
+ if (pd[pde] == 0) {
+ page = alloc_page(GFP_KERNEL | __GFP_DMA);
+ if (!page)
+ return NULL;
- spin_lock_irqsave(&as->lock, flags);
+ pt = page_address(page);
+ SetPageReserved(page);
- if (as->pdir_page) {
- spin_lock(&smmu->lock);
- smmu_write(smmu, SMMU_PTB_ASID_CUR(as->asid), SMMU_PTB_ASID);
- smmu_write(smmu, SMMU_PTB_DATA_RESET_VAL, SMMU_PTB_DATA);
- FLUSH_SMMU_REGS(smmu);
- spin_unlock(&smmu->lock);
+ for (i = 0; i < SMMU_NUM_PTE; i++)
+ pt[i] = 0;
- free_pdir(as);
- }
+ smmu->soc->ops->flush_dcache(page, 0, SMMU_SIZE_PT);
- if (!list_empty(&as->client)) {
- struct smmu_client *c;
+ pd[pde] = SMMU_MK_PDE(page, SMMU_PDE_ATTR | SMMU_PDE_NEXT);
- list_for_each_entry(c, &as->client, list)
- smmu_iommu_detach_dev(domain, c->dev);
+ smmu->soc->ops->flush_dcache(as->pd, pde << 2, 4);
+ smmu_flush_ptc(smmu, as->pd, pde << 2);
+ smmu_flush_tlb_section(smmu, as->id, iova);
+ smmu_flush(smmu);
+ } else {
+ page = pfn_to_page(pd[pde] & SMMU_PFN_MASK);
+ pt = page_address(page);
}
- spin_unlock_irqrestore(&as->lock, flags);
+ *pagep = page;
- domain->priv = NULL;
- dev_dbg(smmu->dev, "smmu_as@%p\n", as);
-}
+ /* Keep track of entries in this page table. */
+ count = page_address(as->count);
+ if (pt[pte] == 0)
+ count[pde]++;
-static const struct iommu_ops smmu_iommu_ops = {
- .capable = smmu_iommu_capable,
- .domain_init = smmu_iommu_domain_init,
- .domain_destroy = smmu_iommu_domain_destroy,
- .attach_dev = smmu_iommu_attach_dev,
- .detach_dev = smmu_iommu_detach_dev,
- .map = smmu_iommu_map,
- .unmap = smmu_iommu_unmap,
- .iova_to_phys = smmu_iommu_iova_to_phys,
- .pgsize_bitmap = SMMU_IOMMU_PGSIZES,
-};
-
-/* Should be in the order of enum */
-static const char * const smmu_debugfs_mc[] = { "mc", };
-static const char * const smmu_debugfs_cache[] = { "tlb", "ptc", };
+ return &pt[pte];
+}
-static ssize_t smmu_debugfs_stats_write(struct file *file,
- const char __user *buffer,
- size_t count, loff_t *pos)
+static void as_put_pte(struct tegra_smmu_as *as, dma_addr_t iova)
{
- struct smmu_debugfs_info *info;
- struct smmu_device *smmu;
- int i;
- enum {
- _OFF = 0,
- _ON,
- _RESET,
- };
- const char * const command[] = {
- [_OFF] = "off",
- [_ON] = "on",
- [_RESET] = "reset",
- };
- char str[] = "reset";
- u32 val;
- size_t offs;
+ u32 pde = (iova >> SMMU_PDE_SHIFT) & 0x3ff;
+ u32 pte = (iova >> SMMU_PTE_SHIFT) & 0x3ff;
+ u32 *count = page_address(as->count);
+ u32 *pd = page_address(as->pd), *pt;
+ struct page *page;
- count = min_t(size_t, count, sizeof(str));
- if (copy_from_user(str, buffer, count))
- return -EINVAL;
+ page = pfn_to_page(pd[pde] & SMMU_PFN_MASK);
+ pt = page_address(page);
- for (i = 0; i < ARRAY_SIZE(command); i++)
- if (strncmp(str, command[i],
- strlen(command[i])) == 0)
- break;
+ /*
+ * When no entries in this page table are used anymore, return the
+ * memory page to the system.
+ */
+ if (pt[pte] != 0) {
+ if (--count[pde] == 0) {
+ ClearPageReserved(page);
+ __free_page(page);
+ pd[pde] = 0;
+ }
- if (i == ARRAY_SIZE(command))
- return -EINVAL;
-
- info = file_inode(file)->i_private;
- smmu = info->smmu;
-
- offs = SMMU_CACHE_CONFIG(info->cache);
- val = smmu_read(smmu, offs);
- switch (i) {
- case _OFF:
- val &= ~SMMU_CACHE_CONFIG_STATS_ENABLE;
- val &= ~SMMU_CACHE_CONFIG_STATS_TEST;
- smmu_write(smmu, val, offs);
- break;
- case _ON:
- val |= SMMU_CACHE_CONFIG_STATS_ENABLE;
- val &= ~SMMU_CACHE_CONFIG_STATS_TEST;
- smmu_write(smmu, val, offs);
- break;
- case _RESET:
- val |= SMMU_CACHE_CONFIG_STATS_TEST;
- smmu_write(smmu, val, offs);
- val &= ~SMMU_CACHE_CONFIG_STATS_TEST;
- smmu_write(smmu, val, offs);
- break;
- default:
- BUG();
- break;
+ pt[pte] = 0;
}
-
- dev_dbg(smmu->dev, "%s() %08x, %08x @%08x\n", __func__,
- val, smmu_read(smmu, offs), offs);
-
- return count;
}
-static int smmu_debugfs_stats_show(struct seq_file *s, void *v)
+static int tegra_smmu_map(struct iommu_domain *domain, unsigned long iova,
+ phys_addr_t paddr, size_t size, int prot)
{
- struct smmu_debugfs_info *info = s->private;
- struct smmu_device *smmu = info->smmu;
- int i;
- const char * const stats[] = { "hit", "miss", };
+ struct tegra_smmu_as *as = domain->priv;
+ struct tegra_smmu *smmu = as->smmu;
+ unsigned long offset;
+ struct page *page;
+ u32 *pte;
+ pte = as_get_pte(as, iova, &page);
+ if (!pte)
+ return -ENOMEM;
- for (i = 0; i < ARRAY_SIZE(stats); i++) {
- u32 val;
- size_t offs;
+ *pte = __phys_to_pfn(paddr) | SMMU_PTE_ATTR;
+ offset = offset_in_page(pte);
- offs = SMMU_STATS_CACHE_COUNT(info->mc, info->cache, i);
- val = smmu_read(smmu, offs);
- seq_printf(s, "%s:%08x ", stats[i], val);
+ smmu->soc->ops->flush_dcache(page, offset, 4);
+ smmu_flush_ptc(smmu, page, offset);
+ smmu_flush_tlb_group(smmu, as->id, iova);
+ smmu_flush(smmu);
- dev_dbg(smmu->dev, "%s() %s %08x @%08x\n", __func__,
- stats[i], val, offs);
- }
- seq_printf(s, "\n");
return 0;
}
-static int smmu_debugfs_stats_open(struct inode *inode, struct file *file)
+static size_t tegra_smmu_unmap(struct iommu_domain *domain, unsigned long iova,
+ size_t size)
{
- return single_open(file, smmu_debugfs_stats_show, inode->i_private);
-}
+ struct tegra_smmu_as *as = domain->priv;
+ struct tegra_smmu *smmu = as->smmu;
+ unsigned long offset;
+ struct page *page;
+ u32 *pte;
-static const struct file_operations smmu_debugfs_stats_fops = {
- .open = smmu_debugfs_stats_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
- .write = smmu_debugfs_stats_write,
-};
+ pte = as_get_pte(as, iova, &page);
+ if (!pte)
+ return 0;
-static void smmu_debugfs_delete(struct smmu_device *smmu)
-{
- debugfs_remove_recursive(smmu->debugfs_root);
- kfree(smmu->debugfs_info);
+ offset = offset_in_page(pte);
+ as_put_pte(as, iova);
+
+ smmu->soc->ops->flush_dcache(page, offset, 4);
+ smmu_flush_ptc(smmu, page, offset);
+ smmu_flush_tlb_group(smmu, as->id, iova);
+ smmu_flush(smmu);
+
+ return size;
}
-static void smmu_debugfs_create(struct smmu_device *smmu)
+static phys_addr_t tegra_smmu_iova_to_phys(struct iommu_domain *domain,
+ dma_addr_t iova)
{
- int i;
- size_t bytes;
- struct dentry *root;
-
- bytes = ARRAY_SIZE(smmu_debugfs_mc) * ARRAY_SIZE(smmu_debugfs_cache) *
- sizeof(*smmu->debugfs_info);
- smmu->debugfs_info = kmalloc(bytes, GFP_KERNEL);
- if (!smmu->debugfs_info)
- return;
-
- root = debugfs_create_dir(dev_name(smmu->dev), NULL);
- if (!root)
- goto err_out;
- smmu->debugfs_root = root;
-
- for (i = 0; i < ARRAY_SIZE(smmu_debugfs_mc); i++) {
- int j;
- struct dentry *mc;
-
- mc = debugfs_create_dir(smmu_debugfs_mc[i], root);
- if (!mc)
- goto err_out;
-
- for (j = 0; j < ARRAY_SIZE(smmu_debugfs_cache); j++) {
- struct dentry *cache;
- struct smmu_debugfs_info *info;
-
- info = smmu->debugfs_info;
- info += i * ARRAY_SIZE(smmu_debugfs_mc) + j;
- info->smmu = smmu;
- info->mc = i;
- info->cache = j;
-
- cache = debugfs_create_file(smmu_debugfs_cache[j],
- S_IWUGO | S_IRUGO, mc,
- (void *)info,
- &smmu_debugfs_stats_fops);
- if (!cache)
- goto err_out;
- }
- }
+ struct tegra_smmu_as *as = domain->priv;
+ struct page *page;
+ unsigned long pfn;
+ u32 *pte;
- return;
+ pte = as_get_pte(as, iova, &page);
+ pfn = *pte & SMMU_PFN_MASK;
-err_out:
- smmu_debugfs_delete(smmu);
+ return PFN_PHYS(pfn);
}
-static int tegra_smmu_suspend(struct device *dev)
+static struct tegra_smmu *tegra_smmu_find(struct device_node *np)
{
- struct smmu_device *smmu = dev_get_drvdata(dev);
+ struct platform_device *pdev;
+ struct tegra_mc *mc;
- smmu->translation_enable_0 = smmu_read(smmu, SMMU_TRANSLATION_ENABLE_0);
- smmu->translation_enable_1 = smmu_read(smmu, SMMU_TRANSLATION_ENABLE_1);
- smmu->translation_enable_2 = smmu_read(smmu, SMMU_TRANSLATION_ENABLE_2);
- smmu->asid_security = smmu_read(smmu, SMMU_ASID_SECURITY);
- return 0;
+ pdev = of_find_device_by_node(np);
+ if (!pdev)
+ return NULL;
+
+ mc = platform_get_drvdata(pdev);
+ if (!mc)
+ return NULL;
+
+ return mc->smmu;
}
-static int tegra_smmu_resume(struct device *dev)
+static int tegra_smmu_add_device(struct device *dev)
{
- struct smmu_device *smmu = dev_get_drvdata(dev);
- unsigned long flags;
- int err;
+ struct device_node *np = dev->of_node;
+ struct of_phandle_args args;
+ unsigned int index = 0;
- spin_lock_irqsave(&smmu->lock, flags);
- err = smmu_setup_regs(smmu);
- spin_unlock_irqrestore(&smmu->lock, flags);
- return err;
+ while (of_parse_phandle_with_args(np, "iommus", "#iommu-cells", index,
+ &args) == 0) {
+ struct tegra_smmu *smmu;
+
+ smmu = tegra_smmu_find(args.np);
+ if (smmu) {
+ /*
+ * Only a single IOMMU master interface is currently
+ * supported by the Linux kernel, so abort after the
+ * first match.
+ */
+ dev->archdata.iommu = smmu;
+ break;
+ }
+
+ index++;
+ }
+
+ return 0;
}
-static int tegra_smmu_probe(struct platform_device *pdev)
+static void tegra_smmu_remove_device(struct device *dev)
{
- struct smmu_device *smmu;
- struct device *dev = &pdev->dev;
- int i, asids, err = 0;
- dma_addr_t uninitialized_var(base);
- size_t bytes, uninitialized_var(size);
+ dev->archdata.iommu = NULL;
+}
- if (smmu_handle)
- return -EIO;
+static const struct iommu_ops tegra_smmu_ops = {
+ .capable = tegra_smmu_capable,
+ .domain_init = tegra_smmu_domain_init,
+ .domain_destroy = tegra_smmu_domain_destroy,
+ .attach_dev = tegra_smmu_attach_dev,
+ .detach_dev = tegra_smmu_detach_dev,
+ .add_device = tegra_smmu_add_device,
+ .remove_device = tegra_smmu_remove_device,
+ .map = tegra_smmu_map,
+ .unmap = tegra_smmu_unmap,
+ .map_sg = default_iommu_map_sg,
+ .iova_to_phys = tegra_smmu_iova_to_phys,
- BUILD_BUG_ON(PAGE_SHIFT != SMMU_PAGE_SHIFT);
+ .pgsize_bitmap = SZ_4K,
+};
- if (of_property_read_u32(dev->of_node, "nvidia,#asids", &asids))
- return -ENODEV;
+static void tegra_smmu_ahb_enable(void)
+{
+ static const struct of_device_id ahb_match[] = {
+ { .compatible = "nvidia,tegra30-ahb", },
+ { }
+ };
+ struct device_node *ahb;
- bytes = sizeof(*smmu) + asids * sizeof(*smmu->as);
- smmu = devm_kzalloc(dev, bytes, GFP_KERNEL);
- if (!smmu) {
- dev_err(dev, "failed to allocate smmu_device\n");
- return -ENOMEM;
+ ahb = of_find_matching_node(NULL, ahb_match);
+ if (ahb) {
+ tegra_ahb_enable_smmu(ahb);
+ of_node_put(ahb);
}
+}
- smmu->nregs = pdev->num_resources;
- smmu->regs = devm_kzalloc(dev, 2 * smmu->nregs * sizeof(*smmu->regs),
- GFP_KERNEL);
- smmu->rege = smmu->regs + smmu->nregs;
- if (!smmu->regs)
- return -ENOMEM;
- for (i = 0; i < smmu->nregs; i++) {
- struct resource *res;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, i);
- smmu->regs[i] = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(smmu->regs[i]))
- return PTR_ERR(smmu->regs[i]);
- smmu->rege[i] = smmu->regs[i] + resource_size(res) - 1;
- }
- /* Same as "mc" 1st regiter block start address */
- smmu->regbase = (void __iomem *)((u32)smmu->regs[0] & PAGE_MASK);
+struct tegra_smmu *tegra_smmu_probe(struct device *dev,
+ const struct tegra_smmu_soc *soc,
+ struct tegra_mc *mc)
+{
+ struct tegra_smmu *smmu;
+ size_t size;
+ u32 value;
+ int err;
- err = of_get_dma_window(dev->of_node, NULL, 0, NULL, &base, &size);
- if (err)
- return -ENODEV;
+ /* This can happen on Tegra20 which doesn't have an SMMU */
+ if (!soc)
+ return NULL;
- if (size & SMMU_PAGE_MASK)
- return -EINVAL;
+ smmu = devm_kzalloc(dev, sizeof(*smmu), GFP_KERNEL);
+ if (!smmu)
+ return ERR_PTR(-ENOMEM);
- size >>= SMMU_PAGE_SHIFT;
- if (!size)
- return -EINVAL;
+ /*
+ * This is a bit of a hack. Ideally we'd want to simply return this
+ * value. However the IOMMU registration process will attempt to add
+ * all devices to the IOMMU when bus_set_iommu() is called. In order
+ * not to rely on global variables to track the IOMMU instance, we
+ * set it here so that it can be looked up from the .add_device()
+ * callback via the IOMMU device's .drvdata field.
+ */
+ mc->smmu = smmu;
- smmu->ahb = of_parse_phandle(dev->of_node, "nvidia,ahb", 0);
- if (!smmu->ahb)
- return -ENODEV;
+ size = BITS_TO_LONGS(soc->num_asids) * sizeof(long);
- smmu->dev = dev;
- smmu->num_as = asids;
- smmu->iovmm_base = base;
- smmu->page_count = size;
-
- smmu->translation_enable_0 = ~0;
- smmu->translation_enable_1 = ~0;
- smmu->translation_enable_2 = ~0;
- smmu->asid_security = 0;
-
- for (i = 0; i < smmu->num_as; i++) {
- struct smmu_as *as = &smmu->as[i];
-
- as->smmu = smmu;
- as->asid = i;
- as->pdir_attr = _PDIR_ATTR;
- as->pde_attr = _PDE_ATTR;
- as->pte_attr = _PTE_ATTR;
-
- spin_lock_init(&as->lock);
- spin_lock_init(&as->client_lock);
- INIT_LIST_HEAD(&as->client);
- }
- spin_lock_init(&smmu->lock);
- err = smmu_setup_regs(smmu);
- if (err)
- return err;
- platform_set_drvdata(pdev, smmu);
+ smmu->asids = devm_kzalloc(dev, size, GFP_KERNEL);
+ if (!smmu->asids)
+ return ERR_PTR(-ENOMEM);
- smmu->avp_vector_page = alloc_page(GFP_KERNEL);
- if (!smmu->avp_vector_page)
- return -ENOMEM;
+ mutex_init(&smmu->lock);
- smmu_debugfs_create(smmu);
- smmu_handle = smmu;
- bus_set_iommu(&platform_bus_type, &smmu_iommu_ops);
- return 0;
-}
+ smmu->regs = mc->regs;
+ smmu->soc = soc;
+ smmu->dev = dev;
+ smmu->mc = mc;
-static int tegra_smmu_remove(struct platform_device *pdev)
-{
- struct smmu_device *smmu = platform_get_drvdata(pdev);
- int i;
+ value = SMMU_PTC_CONFIG_ENABLE | SMMU_PTC_CONFIG_INDEX_MAP(0x3f);
- smmu_debugfs_delete(smmu);
+ if (soc->supports_request_limit)
+ value |= SMMU_PTC_CONFIG_REQ_LIMIT(8);
- smmu_write(smmu, SMMU_CONFIG_DISABLE, SMMU_CONFIG);
- for (i = 0; i < smmu->num_as; i++)
- free_pdir(&smmu->as[i]);
- __free_page(smmu->avp_vector_page);
- smmu_handle = NULL;
- return 0;
-}
+ smmu_writel(smmu, value, SMMU_PTC_CONFIG);
-static const struct dev_pm_ops tegra_smmu_pm_ops = {
- .suspend = tegra_smmu_suspend,
- .resume = tegra_smmu_resume,
-};
+ value = SMMU_TLB_CONFIG_HIT_UNDER_MISS |
+ SMMU_TLB_CONFIG_ACTIVE_LINES(0x20);
-static const struct of_device_id tegra_smmu_of_match[] = {
- { .compatible = "nvidia,tegra30-smmu", },
- { },
-};
-MODULE_DEVICE_TABLE(of, tegra_smmu_of_match);
-
-static struct platform_driver tegra_smmu_driver = {
- .probe = tegra_smmu_probe,
- .remove = tegra_smmu_remove,
- .driver = {
- .owner = THIS_MODULE,
- .name = "tegra-smmu",
- .pm = &tegra_smmu_pm_ops,
- .of_match_table = tegra_smmu_of_match,
- },
-};
+ if (soc->supports_round_robin_arbitration)
+ value |= SMMU_TLB_CONFIG_ROUND_ROBIN_ARBITRATION;
-static int tegra_smmu_init(void)
-{
- return platform_driver_register(&tegra_smmu_driver);
-}
+ smmu_writel(smmu, value, SMMU_TLB_CONFIG);
-static void __exit tegra_smmu_exit(void)
-{
- platform_driver_unregister(&tegra_smmu_driver);
-}
+ smmu_flush_ptc(smmu, NULL, 0);
+ smmu_flush_tlb(smmu);
+ smmu_writel(smmu, SMMU_CONFIG_ENABLE, SMMU_CONFIG);
+ smmu_flush(smmu);
+
+ tegra_smmu_ahb_enable();
-subsys_initcall(tegra_smmu_init);
-module_exit(tegra_smmu_exit);
+ err = bus_set_iommu(&platform_bus_type, &tegra_smmu_ops);
+ if (err < 0)
+ return ERR_PTR(err);
-MODULE_DESCRIPTION("IOMMU API for SMMU in Tegra30");
-MODULE_AUTHOR("Hiroshi DOYU <hdoyu@nvidia.com>");
-MODULE_ALIAS("platform:tegra-smmu");
-MODULE_LICENSE("GPL v2");
+ return smmu;
+}
#include <linux/of_pci.h>
#include <linux/irqdomain.h>
#include <linux/slab.h>
+#include <linux/syscore_ops.h>
#include <linux/msi.h>
#include <asm/mach/arch.h>
#include <asm/exception.h>
#define ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS (0x34)
#define ARMADA_370_XP_INT_SOURCE_CTL(irq) (0x100 + irq*4)
#define ARMADA_370_XP_INT_SOURCE_CPU_MASK 0xF
+#define ARMADA_370_XP_INT_IRQ_FIQ_MASK(cpuid) ((BIT(0) | BIT(8)) << cpuid)
#define ARMADA_370_XP_CPU_INTACK_OFFS (0x44)
#define ARMADA_375_PPI_CAUSE (0x10)
static void __iomem *per_cpu_int_base;
static void __iomem *main_int_base;
static struct irq_domain *armada_370_xp_mpic_domain;
+static u32 doorbell_mask_reg;
#ifdef CONFIG_PCI_MSI
static struct irq_domain *armada_370_xp_msi_domain;
static DECLARE_BITMAP(msi_used, PCI_MSI_DOORBELL_NR);
struct irq_desc *desc)
{
struct irq_chip *chip = irq_get_chip(irq);
- unsigned long irqmap, irqn;
+ unsigned long irqmap, irqn, irqsrc, cpuid;
unsigned int cascade_irq;
chained_irq_enter(chip, desc);
irqmap = readl_relaxed(per_cpu_int_base + ARMADA_375_PPI_CAUSE);
-
- if (irqmap & BIT(0)) {
- armada_370_xp_handle_msi_irq(NULL, true);
- irqmap &= ~BIT(0);
- }
+ cpuid = cpu_logical_map(smp_processor_id());
for_each_set_bit(irqn, &irqmap, BITS_PER_LONG) {
+ irqsrc = readl_relaxed(main_int_base +
+ ARMADA_370_XP_INT_SOURCE_CTL(irqn));
+
+ /* Check if the interrupt is not masked on current CPU.
+ * Test IRQ (0-1) and FIQ (8-9) mask bits.
+ */
+ if (!(irqsrc & ARMADA_370_XP_INT_IRQ_FIQ_MASK(cpuid)))
+ continue;
+
+ if (irqn == 1) {
+ armada_370_xp_handle_msi_irq(NULL, true);
+ continue;
+ }
+
cascade_irq = irq_find_mapping(armada_370_xp_mpic_domain, irqn);
generic_handle_irq(cascade_irq);
}
} while (1);
}
+static int armada_370_xp_mpic_suspend(void)
+{
+ doorbell_mask_reg = readl(per_cpu_int_base +
+ ARMADA_370_XP_IN_DRBEL_MSK_OFFS);
+ return 0;
+}
+
+static void armada_370_xp_mpic_resume(void)
+{
+ int nirqs;
+ irq_hw_number_t irq;
+
+ /* Re-enable interrupts */
+ nirqs = (readl(main_int_base + ARMADA_370_XP_INT_CONTROL) >> 2) & 0x3ff;
+ for (irq = 0; irq < nirqs; irq++) {
+ struct irq_data *data;
+ int virq;
+
+ virq = irq_linear_revmap(armada_370_xp_mpic_domain, irq);
+ if (virq == 0)
+ continue;
+
+ if (irq != ARMADA_370_XP_TIMER0_PER_CPU_IRQ)
+ writel(irq, per_cpu_int_base +
+ ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
+ else
+ writel(irq, main_int_base +
+ ARMADA_370_XP_INT_SET_ENABLE_OFFS);
+
+ data = irq_get_irq_data(virq);
+ if (!irqd_irq_disabled(data))
+ armada_370_xp_irq_unmask(data);
+ }
+
+ /* Reconfigure doorbells for IPIs and MSIs */
+ writel(doorbell_mask_reg,
+ per_cpu_int_base + ARMADA_370_XP_IN_DRBEL_MSK_OFFS);
+ if (doorbell_mask_reg & IPI_DOORBELL_MASK)
+ writel(0, per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
+ if (doorbell_mask_reg & PCI_MSI_DOORBELL_MASK)
+ writel(1, per_cpu_int_base + ARMADA_370_XP_INT_CLEAR_MASK_OFFS);
+}
+
+struct syscore_ops armada_370_xp_mpic_syscore_ops = {
+ .suspend = armada_370_xp_mpic_suspend,
+ .resume = armada_370_xp_mpic_resume,
+};
+
static int __init armada_370_xp_mpic_of_init(struct device_node *node,
struct device_node *parent)
{
armada_370_xp_mpic_handle_cascade_irq);
}
+ register_syscore_ops(&armada_370_xp_mpic_syscore_ops);
+
return 0;
}
}
ret = irq_alloc_domain_generic_chips(domain, 32, 1, name,
- handle_level_irq, 0, 0,
- IRQCHIP_SKIP_SET_WAKE);
+ handle_fasteoi_irq,
+ IRQ_NOREQUEST | IRQ_NOPROBE |
+ IRQ_NOAUTOEN, 0, 0);
if (ret)
goto err_domain_remove;
gc->unused = 0;
gc->wake_enabled = ~0;
gc->chip_types[0].type = IRQ_TYPE_SENSE_MASK;
- gc->chip_types[0].handler = handle_fasteoi_irq;
gc->chip_types[0].chip.irq_eoi = irq_gc_eoi;
gc->chip_types[0].chip.irq_set_wake = irq_gc_set_wake;
gc->chip_types[0].chip.irq_shutdown = aic_common_shutdown;
unsigned int idx;
parent_irq = irq_of_parse_and_map(dn, irq);
- if (parent_irq < 0) {
+ if (!parent_irq) {
pr_err("failed to map interrupt %d\n", irq);
- return parent_irq;
+ return -EINVAL;
}
/* For multiple parent IRQs with multiple words, this looks like:
writel(0xffffffff, data->base + CPU_CLEAR);
data->parent_irq = irq_of_parse_and_map(np, 0);
- if (data->parent_irq < 0) {
+ if (!data->parent_irq) {
pr_err("failed to find parent interrupt\n");
- ret = data->parent_irq;
+ ret = -EINVAL;
goto out_unmap;
}
return 0;
}
IRQCHIP_DECLARE(gic_400, "arm,gic-400", gic_of_init);
+IRQCHIP_DECLARE(arm11mp_gic, "arm,arm11mp-gic", gic_of_init);
+IRQCHIP_DECLARE(arm1176jzf_dc_gic, "arm,arm1176jzf-devchip-gic", gic_of_init);
IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", gic_of_init);
IRQCHIP_DECLARE(cortex_a9_gic, "arm,cortex-a9-gic", gic_of_init);
IRQCHIP_DECLARE(cortex_a7_gic, "arm,cortex-a7-gic", gic_of_init);
* published by the Free Software Foundation.
*/
-#include <linux/module.h>
-#include <linux/kernel.h>
+#include <linux/ctype.h>
+#include <linux/device.h>
+#include <linux/err.h>
#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/leds.h>
#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/spinlock.h>
-#include <linux/device.h>
#include <linux/timer.h>
-#include <linux/err.h>
-#include <linux/ctype.h>
-#include <linux/leds.h>
#include "leds.h"
static struct class *leds_class;
-static void led_update_brightness(struct led_classdev *led_cdev)
-{
- if (led_cdev->brightness_get)
- led_cdev->brightness = led_cdev->brightness_get(led_cdev);
-}
-
static ssize_t brightness_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
}
static DEVICE_ATTR_RW(brightness);
-static ssize_t led_max_brightness_show(struct device *dev,
+static ssize_t max_brightness_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
return sprintf(buf, "%u\n", led_cdev->max_brightness);
}
-static DEVICE_ATTR(max_brightness, 0444, led_max_brightness_show, NULL);
+static DEVICE_ATTR_RO(max_brightness);
#ifdef CONFIG_LEDS_TRIGGERS
static DEVICE_ATTR(trigger, 0644, led_trigger_show, led_trigger_store);
*/
#include <linux/kernel.h>
+#include <linux/leds.h>
#include <linux/list.h>
#include <linux/module.h>
+#include <linux/mutex.h>
#include <linux/rwsem.h>
-#include <linux/leds.h>
#include "leds.h"
DECLARE_RWSEM(leds_list_lock);
__led_set_brightness(led_cdev, brightness);
}
EXPORT_SYMBOL(led_set_brightness);
+
+int led_update_brightness(struct led_classdev *led_cdev)
+{
+ int ret = 0;
+
+ if (led_cdev->brightness_get) {
+ ret = led_cdev->brightness_get(led_cdev);
+ if (ret >= 0) {
+ led_cdev->brightness = ret;
+ return 0;
+ }
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(led_update_brightness);
* Free Software Foundation.
*/
#include <linux/err.h>
+#include <linux/leds.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
-#include <linux/leds.h>
/**
* gpio_led_register_device - register a gpio-led device
struct platform_device *ret;
struct gpio_led_platform_data _pdata = *pdata;
+ if (!pdata->num_leds)
+ return ERR_PTR(-EINVAL);
+
_pdata.leds = kmemdup(pdata->leds,
pdata->num_leds * sizeof(*pdata->leds), GFP_KERNEL);
if (!_pdata.leds)
* published by the Free Software Foundation.
*
*/
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
+#include <linux/err.h>
#include <linux/gpio.h>
+#include <linux/kernel.h>
#include <linux/leds.h>
+#include <linux/module.h>
#include <linux/of.h>
-#include <linux/of_platform.h>
#include <linux/of_gpio.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/workqueue.h>
-#include <linux/module.h>
-#include <linux/err.h>
struct gpio_led_data {
struct led_classdev cdev;
static void gpio_led_work(struct work_struct *work)
{
- struct gpio_led_data *led_dat =
+ struct gpio_led_data *led_dat =
container_of(work, struct gpio_led_data, work);
if (led_dat->blinking) {
}
#endif /* CONFIG_OF_GPIO */
-
static int gpio_led_probe(struct platform_device *pdev)
{
struct gpio_led_platform_data *pdata = dev_get_platdata(&pdev->dev);
struct gpio_leds_priv *priv;
int i, ret = 0;
-
if (pdata && pdata->num_leds) {
priv = devm_kzalloc(&pdev->dev,
sizeof_gpio_leds_priv(pdata->num_leds),
}
/* to expose the default value to userspace */
- led->ldev.brightness = led->status;
+ led->ldev.brightness =
+ (enum led_brightness) led->status;
/* Set the default led status */
err = lp3944_led_set(led, led->status);
if (!gpio_data->gpio)
return;
- tmp = gpio_get_value(gpio_data->gpio);
+ tmp = gpio_get_value_cansleep(gpio_data->gpio);
if (gpio_data->inverted)
tmp = !tmp;
+# Generic MAILBOX API
+
+obj-$(CONFIG_MAILBOX) += mailbox.o
+
obj-$(CONFIG_PL320_MBOX) += pl320-ipc.o
obj-$(CONFIG_OMAP2PLUS_MBOX) += omap-mailbox.o
--- /dev/null
+/*
+ * Mailbox: Common code for Mailbox controllers and users
+ *
+ * Copyright (C) 2013-2014 Linaro Ltd.
+ * Author: Jassi Brar <jassisinghbrar@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/bitops.h>
+#include <linux/mailbox_client.h>
+#include <linux/mailbox_controller.h>
+
+#define TXDONE_BY_IRQ BIT(0) /* controller has remote RTR irq */
+#define TXDONE_BY_POLL BIT(1) /* controller can read status of last TX */
+#define TXDONE_BY_ACK BIT(2) /* S/W ACK recevied by Client ticks the TX */
+
+static LIST_HEAD(mbox_cons);
+static DEFINE_MUTEX(con_mutex);
+
+static int add_to_rbuf(struct mbox_chan *chan, void *mssg)
+{
+ int idx;
+ unsigned long flags;
+
+ spin_lock_irqsave(&chan->lock, flags);
+
+ /* See if there is any space left */
+ if (chan->msg_count == MBOX_TX_QUEUE_LEN) {
+ spin_unlock_irqrestore(&chan->lock, flags);
+ return -ENOBUFS;
+ }
+
+ idx = chan->msg_free;
+ chan->msg_data[idx] = mssg;
+ chan->msg_count++;
+
+ if (idx == MBOX_TX_QUEUE_LEN - 1)
+ chan->msg_free = 0;
+ else
+ chan->msg_free++;
+
+ spin_unlock_irqrestore(&chan->lock, flags);
+
+ return idx;
+}
+
+static void msg_submit(struct mbox_chan *chan)
+{
+ unsigned count, idx;
+ unsigned long flags;
+ void *data;
+ int err;
+
+ spin_lock_irqsave(&chan->lock, flags);
+
+ if (!chan->msg_count || chan->active_req)
+ goto exit;
+
+ count = chan->msg_count;
+ idx = chan->msg_free;
+ if (idx >= count)
+ idx -= count;
+ else
+ idx += MBOX_TX_QUEUE_LEN - count;
+
+ data = chan->msg_data[idx];
+
+ /* Try to submit a message to the MBOX controller */
+ err = chan->mbox->ops->send_data(chan, data);
+ if (!err) {
+ chan->active_req = data;
+ chan->msg_count--;
+ }
+exit:
+ spin_unlock_irqrestore(&chan->lock, flags);
+}
+
+static void tx_tick(struct mbox_chan *chan, int r)
+{
+ unsigned long flags;
+ void *mssg;
+
+ spin_lock_irqsave(&chan->lock, flags);
+ mssg = chan->active_req;
+ chan->active_req = NULL;
+ spin_unlock_irqrestore(&chan->lock, flags);
+
+ /* Submit next message */
+ msg_submit(chan);
+
+ /* Notify the client */
+ if (mssg && chan->cl->tx_done)
+ chan->cl->tx_done(chan->cl, mssg, r);
+
+ if (chan->cl->tx_block)
+ complete(&chan->tx_complete);
+}
+
+static void poll_txdone(unsigned long data)
+{
+ struct mbox_controller *mbox = (struct mbox_controller *)data;
+ bool txdone, resched = false;
+ int i;
+
+ for (i = 0; i < mbox->num_chans; i++) {
+ struct mbox_chan *chan = &mbox->chans[i];
+
+ if (chan->active_req && chan->cl) {
+ resched = true;
+ txdone = chan->mbox->ops->last_tx_done(chan);
+ if (txdone)
+ tx_tick(chan, 0);
+ }
+ }
+
+ if (resched)
+ mod_timer(&mbox->poll, jiffies +
+ msecs_to_jiffies(mbox->txpoll_period));
+}
+
+/**
+ * mbox_chan_received_data - A way for controller driver to push data
+ * received from remote to the upper layer.
+ * @chan: Pointer to the mailbox channel on which RX happened.
+ * @mssg: Client specific message typecasted as void *
+ *
+ * After startup and before shutdown any data received on the chan
+ * is passed on to the API via atomic mbox_chan_received_data().
+ * The controller should ACK the RX only after this call returns.
+ */
+void mbox_chan_received_data(struct mbox_chan *chan, void *mssg)
+{
+ /* No buffering the received data */
+ if (chan->cl->rx_callback)
+ chan->cl->rx_callback(chan->cl, mssg);
+}
+EXPORT_SYMBOL_GPL(mbox_chan_received_data);
+
+/**
+ * mbox_chan_txdone - A way for controller driver to notify the
+ * framework that the last TX has completed.
+ * @chan: Pointer to the mailbox chan on which TX happened.
+ * @r: Status of last TX - OK or ERROR
+ *
+ * The controller that has IRQ for TX ACK calls this atomic API
+ * to tick the TX state machine. It works only if txdone_irq
+ * is set by the controller.
+ */
+void mbox_chan_txdone(struct mbox_chan *chan, int r)
+{
+ if (unlikely(!(chan->txdone_method & TXDONE_BY_IRQ))) {
+ dev_err(chan->mbox->dev,
+ "Controller can't run the TX ticker\n");
+ return;
+ }
+
+ tx_tick(chan, r);
+}
+EXPORT_SYMBOL_GPL(mbox_chan_txdone);
+
+/**
+ * mbox_client_txdone - The way for a client to run the TX state machine.
+ * @chan: Mailbox channel assigned to this client.
+ * @r: Success status of last transmission.
+ *
+ * The client/protocol had received some 'ACK' packet and it notifies
+ * the API that the last packet was sent successfully. This only works
+ * if the controller can't sense TX-Done.
+ */
+void mbox_client_txdone(struct mbox_chan *chan, int r)
+{
+ if (unlikely(!(chan->txdone_method & TXDONE_BY_ACK))) {
+ dev_err(chan->mbox->dev, "Client can't run the TX ticker\n");
+ return;
+ }
+
+ tx_tick(chan, r);
+}
+EXPORT_SYMBOL_GPL(mbox_client_txdone);
+
+/**
+ * mbox_client_peek_data - A way for client driver to pull data
+ * received from remote by the controller.
+ * @chan: Mailbox channel assigned to this client.
+ *
+ * A poke to controller driver for any received data.
+ * The data is actually passed onto client via the
+ * mbox_chan_received_data()
+ * The call can be made from atomic context, so the controller's
+ * implementation of peek_data() must not sleep.
+ *
+ * Return: True, if controller has, and is going to push after this,
+ * some data.
+ * False, if controller doesn't have any data to be read.
+ */
+bool mbox_client_peek_data(struct mbox_chan *chan)
+{
+ if (chan->mbox->ops->peek_data)
+ return chan->mbox->ops->peek_data(chan);
+
+ return false;
+}
+EXPORT_SYMBOL_GPL(mbox_client_peek_data);
+
+/**
+ * mbox_send_message - For client to submit a message to be
+ * sent to the remote.
+ * @chan: Mailbox channel assigned to this client.
+ * @mssg: Client specific message typecasted.
+ *
+ * For client to submit data to the controller destined for a remote
+ * processor. If the client had set 'tx_block', the call will return
+ * either when the remote receives the data or when 'tx_tout' millisecs
+ * run out.
+ * In non-blocking mode, the requests are buffered by the API and a
+ * non-negative token is returned for each queued request. If the request
+ * is not queued, a negative token is returned. Upon failure or successful
+ * TX, the API calls 'tx_done' from atomic context, from which the client
+ * could submit yet another request.
+ * The pointer to message should be preserved until it is sent
+ * over the chan, i.e, tx_done() is made.
+ * This function could be called from atomic context as it simply
+ * queues the data and returns a token against the request.
+ *
+ * Return: Non-negative integer for successful submission (non-blocking mode)
+ * or transmission over chan (blocking mode).
+ * Negative value denotes failure.
+ */
+int mbox_send_message(struct mbox_chan *chan, void *mssg)
+{
+ int t;
+
+ if (!chan || !chan->cl)
+ return -EINVAL;
+
+ t = add_to_rbuf(chan, mssg);
+ if (t < 0) {
+ dev_err(chan->mbox->dev, "Try increasing MBOX_TX_QUEUE_LEN\n");
+ return t;
+ }
+
+ msg_submit(chan);
+
+ if (chan->txdone_method == TXDONE_BY_POLL)
+ poll_txdone((unsigned long)chan->mbox);
+
+ if (chan->cl->tx_block && chan->active_req) {
+ unsigned long wait;
+ int ret;
+
+ if (!chan->cl->tx_tout) /* wait forever */
+ wait = msecs_to_jiffies(3600000);
+ else
+ wait = msecs_to_jiffies(chan->cl->tx_tout);
+
+ ret = wait_for_completion_timeout(&chan->tx_complete, wait);
+ if (ret == 0) {
+ t = -EIO;
+ tx_tick(chan, -EIO);
+ }
+ }
+
+ return t;
+}
+EXPORT_SYMBOL_GPL(mbox_send_message);
+
+/**
+ * mbox_request_channel - Request a mailbox channel.
+ * @cl: Identity of the client requesting the channel.
+ * @index: Index of mailbox specifier in 'mboxes' property.
+ *
+ * The Client specifies its requirements and capabilities while asking for
+ * a mailbox channel. It can't be called from atomic context.
+ * The channel is exclusively allocated and can't be used by another
+ * client before the owner calls mbox_free_channel.
+ * After assignment, any packet received on this channel will be
+ * handed over to the client via the 'rx_callback'.
+ * The framework holds reference to the client, so the mbox_client
+ * structure shouldn't be modified until the mbox_free_channel returns.
+ *
+ * Return: Pointer to the channel assigned to the client if successful.
+ * ERR_PTR for request failure.
+ */
+struct mbox_chan *mbox_request_channel(struct mbox_client *cl, int index)
+{
+ struct device *dev = cl->dev;
+ struct mbox_controller *mbox;
+ struct of_phandle_args spec;
+ struct mbox_chan *chan;
+ unsigned long flags;
+ int ret;
+
+ if (!dev || !dev->of_node) {
+ pr_debug("%s: No owner device node\n", __func__);
+ return ERR_PTR(-ENODEV);
+ }
+
+ mutex_lock(&con_mutex);
+
+ if (of_parse_phandle_with_args(dev->of_node, "mboxes",
+ "#mbox-cells", index, &spec)) {
+ dev_dbg(dev, "%s: can't parse \"mboxes\" property\n", __func__);
+ mutex_unlock(&con_mutex);
+ return ERR_PTR(-ENODEV);
+ }
+
+ chan = NULL;
+ list_for_each_entry(mbox, &mbox_cons, node)
+ if (mbox->dev->of_node == spec.np) {
+ chan = mbox->of_xlate(mbox, &spec);
+ break;
+ }
+
+ of_node_put(spec.np);
+
+ if (!chan || chan->cl || !try_module_get(mbox->dev->driver->owner)) {
+ dev_dbg(dev, "%s: mailbox not free\n", __func__);
+ mutex_unlock(&con_mutex);
+ return ERR_PTR(-EBUSY);
+ }
+
+ spin_lock_irqsave(&chan->lock, flags);
+ chan->msg_free = 0;
+ chan->msg_count = 0;
+ chan->active_req = NULL;
+ chan->cl = cl;
+ init_completion(&chan->tx_complete);
+
+ if (chan->txdone_method == TXDONE_BY_POLL && cl->knows_txdone)
+ chan->txdone_method |= TXDONE_BY_ACK;
+
+ spin_unlock_irqrestore(&chan->lock, flags);
+
+ ret = chan->mbox->ops->startup(chan);
+ if (ret) {
+ dev_err(dev, "Unable to startup the chan (%d)\n", ret);
+ mbox_free_channel(chan);
+ chan = ERR_PTR(ret);
+ }
+
+ mutex_unlock(&con_mutex);
+ return chan;
+}
+EXPORT_SYMBOL_GPL(mbox_request_channel);
+
+/**
+ * mbox_free_channel - The client relinquishes control of a mailbox
+ * channel by this call.
+ * @chan: The mailbox channel to be freed.
+ */
+void mbox_free_channel(struct mbox_chan *chan)
+{
+ unsigned long flags;
+
+ if (!chan || !chan->cl)
+ return;
+
+ chan->mbox->ops->shutdown(chan);
+
+ /* The queued TX requests are simply aborted, no callbacks are made */
+ spin_lock_irqsave(&chan->lock, flags);
+ chan->cl = NULL;
+ chan->active_req = NULL;
+ if (chan->txdone_method == (TXDONE_BY_POLL | TXDONE_BY_ACK))
+ chan->txdone_method = TXDONE_BY_POLL;
+
+ module_put(chan->mbox->dev->driver->owner);
+ spin_unlock_irqrestore(&chan->lock, flags);
+}
+EXPORT_SYMBOL_GPL(mbox_free_channel);
+
+static struct mbox_chan *
+of_mbox_index_xlate(struct mbox_controller *mbox,
+ const struct of_phandle_args *sp)
+{
+ int ind = sp->args[0];
+
+ if (ind >= mbox->num_chans)
+ return NULL;
+
+ return &mbox->chans[ind];
+}
+
+/**
+ * mbox_controller_register - Register the mailbox controller
+ * @mbox: Pointer to the mailbox controller.
+ *
+ * The controller driver registers its communication channels
+ */
+int mbox_controller_register(struct mbox_controller *mbox)
+{
+ int i, txdone;
+
+ /* Sanity check */
+ if (!mbox || !mbox->dev || !mbox->ops || !mbox->num_chans)
+ return -EINVAL;
+
+ if (mbox->txdone_irq)
+ txdone = TXDONE_BY_IRQ;
+ else if (mbox->txdone_poll)
+ txdone = TXDONE_BY_POLL;
+ else /* It has to be ACK then */
+ txdone = TXDONE_BY_ACK;
+
+ if (txdone == TXDONE_BY_POLL) {
+ mbox->poll.function = &poll_txdone;
+ mbox->poll.data = (unsigned long)mbox;
+ init_timer(&mbox->poll);
+ }
+
+ for (i = 0; i < mbox->num_chans; i++) {
+ struct mbox_chan *chan = &mbox->chans[i];
+
+ chan->cl = NULL;
+ chan->mbox = mbox;
+ chan->txdone_method = txdone;
+ spin_lock_init(&chan->lock);
+ }
+
+ if (!mbox->of_xlate)
+ mbox->of_xlate = of_mbox_index_xlate;
+
+ mutex_lock(&con_mutex);
+ list_add_tail(&mbox->node, &mbox_cons);
+ mutex_unlock(&con_mutex);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(mbox_controller_register);
+
+/**
+ * mbox_controller_unregister - Unregister the mailbox controller
+ * @mbox: Pointer to the mailbox controller.
+ */
+void mbox_controller_unregister(struct mbox_controller *mbox)
+{
+ int i;
+
+ if (!mbox)
+ return;
+
+ mutex_lock(&con_mutex);
+
+ list_del(&mbox->node);
+
+ for (i = 0; i < mbox->num_chans; i++)
+ mbox_free_channel(&mbox->chans[i]);
+
+ if (mbox->txdone_poll)
+ del_timer_sync(&mbox->poll);
+
+ mutex_unlock(&con_mutex);
+}
+EXPORT_SYMBOL_GPL(mbox_controller_unregister);
#include <linux/device.h>
#include <linux/amba/bus.h>
-#include <linux/mailbox.h>
+#include <linux/pl320-ipc.h>
#define IPCMxSOURCE(m) ((m) * 0x40)
#define IPCMxDSET(m) (((m) * 0x40) + 0x004)
/*----------------------------------------------------------------*/
-struct bucket {
- spinlock_t lock;
- struct hlist_head cells;
-};
+#define MIN_CELLS 1024
struct dm_bio_prison {
+ spinlock_t lock;
mempool_t *cell_pool;
-
- unsigned nr_buckets;
- unsigned hash_mask;
- struct bucket *buckets;
+ struct rb_root cells;
};
-/*----------------------------------------------------------------*/
-
-static uint32_t calc_nr_buckets(unsigned nr_cells)
-{
- uint32_t n = 128;
-
- nr_cells /= 4;
- nr_cells = min(nr_cells, 8192u);
-
- while (n < nr_cells)
- n <<= 1;
-
- return n;
-}
-
static struct kmem_cache *_cell_cache;
-static void init_bucket(struct bucket *b)
-{
- spin_lock_init(&b->lock);
- INIT_HLIST_HEAD(&b->cells);
-}
+/*----------------------------------------------------------------*/
/*
* @nr_cells should be the number of cells you want in use _concurrently_.
* Don't confuse it with the number of distinct keys.
*/
-struct dm_bio_prison *dm_bio_prison_create(unsigned nr_cells)
+struct dm_bio_prison *dm_bio_prison_create(void)
{
- unsigned i;
- uint32_t nr_buckets = calc_nr_buckets(nr_cells);
- size_t len = sizeof(struct dm_bio_prison) +
- (sizeof(struct bucket) * nr_buckets);
- struct dm_bio_prison *prison = kmalloc(len, GFP_KERNEL);
+ struct dm_bio_prison *prison = kmalloc(sizeof(*prison), GFP_KERNEL);
if (!prison)
return NULL;
- prison->cell_pool = mempool_create_slab_pool(nr_cells, _cell_cache);
+ spin_lock_init(&prison->lock);
+
+ prison->cell_pool = mempool_create_slab_pool(MIN_CELLS, _cell_cache);
if (!prison->cell_pool) {
kfree(prison);
return NULL;
}
- prison->nr_buckets = nr_buckets;
- prison->hash_mask = nr_buckets - 1;
- prison->buckets = (struct bucket *) (prison + 1);
- for (i = 0; i < nr_buckets; i++)
- init_bucket(prison->buckets + i);
+ prison->cells = RB_ROOT;
return prison;
}
}
EXPORT_SYMBOL_GPL(dm_bio_prison_free_cell);
-static uint32_t hash_key(struct dm_bio_prison *prison, struct dm_cell_key *key)
+static void __setup_new_cell(struct dm_cell_key *key,
+ struct bio *holder,
+ struct dm_bio_prison_cell *cell)
{
- const unsigned long BIG_PRIME = 4294967291UL;
- uint64_t hash = key->block * BIG_PRIME;
-
- return (uint32_t) (hash & prison->hash_mask);
+ memcpy(&cell->key, key, sizeof(cell->key));
+ cell->holder = holder;
+ bio_list_init(&cell->bios);
}
-static int keys_equal(struct dm_cell_key *lhs, struct dm_cell_key *rhs)
+static int cmp_keys(struct dm_cell_key *lhs,
+ struct dm_cell_key *rhs)
{
- return (lhs->virtual == rhs->virtual) &&
- (lhs->dev == rhs->dev) &&
- (lhs->block == rhs->block);
-}
+ if (lhs->virtual < rhs->virtual)
+ return -1;
-static struct bucket *get_bucket(struct dm_bio_prison *prison,
- struct dm_cell_key *key)
-{
- return prison->buckets + hash_key(prison, key);
-}
+ if (lhs->virtual > rhs->virtual)
+ return 1;
-static struct dm_bio_prison_cell *__search_bucket(struct bucket *b,
- struct dm_cell_key *key)
-{
- struct dm_bio_prison_cell *cell;
+ if (lhs->dev < rhs->dev)
+ return -1;
- hlist_for_each_entry(cell, &b->cells, list)
- if (keys_equal(&cell->key, key))
- return cell;
+ if (lhs->dev > rhs->dev)
+ return 1;
- return NULL;
-}
+ if (lhs->block_end <= rhs->block_begin)
+ return -1;
-static void __setup_new_cell(struct bucket *b,
- struct dm_cell_key *key,
- struct bio *holder,
- struct dm_bio_prison_cell *cell)
-{
- memcpy(&cell->key, key, sizeof(cell->key));
- cell->holder = holder;
- bio_list_init(&cell->bios);
- hlist_add_head(&cell->list, &b->cells);
+ if (lhs->block_begin >= rhs->block_end)
+ return 1;
+
+ return 0;
}
-static int __bio_detain(struct bucket *b,
+static int __bio_detain(struct dm_bio_prison *prison,
struct dm_cell_key *key,
struct bio *inmate,
struct dm_bio_prison_cell *cell_prealloc,
struct dm_bio_prison_cell **cell_result)
{
- struct dm_bio_prison_cell *cell;
-
- cell = __search_bucket(b, key);
- if (cell) {
- if (inmate)
- bio_list_add(&cell->bios, inmate);
- *cell_result = cell;
- return 1;
+ int r;
+ struct rb_node **new = &prison->cells.rb_node, *parent = NULL;
+
+ while (*new) {
+ struct dm_bio_prison_cell *cell =
+ container_of(*new, struct dm_bio_prison_cell, node);
+
+ r = cmp_keys(key, &cell->key);
+
+ parent = *new;
+ if (r < 0)
+ new = &((*new)->rb_left);
+ else if (r > 0)
+ new = &((*new)->rb_right);
+ else {
+ if (inmate)
+ bio_list_add(&cell->bios, inmate);
+ *cell_result = cell;
+ return 1;
+ }
}
- __setup_new_cell(b, key, inmate, cell_prealloc);
+ __setup_new_cell(key, inmate, cell_prealloc);
*cell_result = cell_prealloc;
+
+ rb_link_node(&cell_prealloc->node, parent, new);
+ rb_insert_color(&cell_prealloc->node, &prison->cells);
+
return 0;
}
{
int r;
unsigned long flags;
- struct bucket *b = get_bucket(prison, key);
- spin_lock_irqsave(&b->lock, flags);
- r = __bio_detain(b, key, inmate, cell_prealloc, cell_result);
- spin_unlock_irqrestore(&b->lock, flags);
+ spin_lock_irqsave(&prison->lock, flags);
+ r = __bio_detain(prison, key, inmate, cell_prealloc, cell_result);
+ spin_unlock_irqrestore(&prison->lock, flags);
return r;
}
/*
* @inmates must have been initialised prior to this call
*/
-static void __cell_release(struct dm_bio_prison_cell *cell,
+static void __cell_release(struct dm_bio_prison *prison,
+ struct dm_bio_prison_cell *cell,
struct bio_list *inmates)
{
- hlist_del(&cell->list);
+ rb_erase(&cell->node, &prison->cells);
if (inmates) {
if (cell->holder)
struct bio_list *bios)
{
unsigned long flags;
- struct bucket *b = get_bucket(prison, &cell->key);
- spin_lock_irqsave(&b->lock, flags);
- __cell_release(cell, bios);
- spin_unlock_irqrestore(&b->lock, flags);
+ spin_lock_irqsave(&prison->lock, flags);
+ __cell_release(prison, cell, bios);
+ spin_unlock_irqrestore(&prison->lock, flags);
}
EXPORT_SYMBOL_GPL(dm_cell_release);
/*
* Sometimes we don't want the holder, just the additional bios.
*/
-static void __cell_release_no_holder(struct dm_bio_prison_cell *cell,
+static void __cell_release_no_holder(struct dm_bio_prison *prison,
+ struct dm_bio_prison_cell *cell,
struct bio_list *inmates)
{
- hlist_del(&cell->list);
+ rb_erase(&cell->node, &prison->cells);
bio_list_merge(inmates, &cell->bios);
}
struct bio_list *inmates)
{
unsigned long flags;
- struct bucket *b = get_bucket(prison, &cell->key);
- spin_lock_irqsave(&b->lock, flags);
- __cell_release_no_holder(cell, inmates);
- spin_unlock_irqrestore(&b->lock, flags);
+ spin_lock_irqsave(&prison->lock, flags);
+ __cell_release_no_holder(prison, cell, inmates);
+ spin_unlock_irqrestore(&prison->lock, flags);
}
EXPORT_SYMBOL_GPL(dm_cell_release_no_holder);
}
EXPORT_SYMBOL_GPL(dm_cell_error);
+void dm_cell_visit_release(struct dm_bio_prison *prison,
+ void (*visit_fn)(void *, struct dm_bio_prison_cell *),
+ void *context,
+ struct dm_bio_prison_cell *cell)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&prison->lock, flags);
+ visit_fn(context, cell);
+ rb_erase(&cell->node, &prison->cells);
+ spin_unlock_irqrestore(&prison->lock, flags);
+}
+EXPORT_SYMBOL_GPL(dm_cell_visit_release);
+
/*----------------------------------------------------------------*/
#define DEFERRED_SET_SIZE 64
#include "persistent-data/dm-block-manager.h" /* FIXME: for dm_block_t */
#include "dm-thin-metadata.h" /* FIXME: for dm_thin_id */
-#include <linux/list.h>
#include <linux/bio.h>
+#include <linux/rbtree.h>
/*----------------------------------------------------------------*/
*/
struct dm_bio_prison;
-/* FIXME: this needs to be more abstract */
+/*
+ * Keys define a range of blocks within either a virtual or physical
+ * device.
+ */
struct dm_cell_key {
int virtual;
dm_thin_id dev;
- dm_block_t block;
+ dm_block_t block_begin, block_end;
};
/*
* themselves.
*/
struct dm_bio_prison_cell {
- struct hlist_node list;
+ struct list_head user_list; /* for client use */
+ struct rb_node node;
+
struct dm_cell_key key;
struct bio *holder;
struct bio_list bios;
};
-struct dm_bio_prison *dm_bio_prison_create(unsigned nr_cells);
+struct dm_bio_prison *dm_bio_prison_create(void);
void dm_bio_prison_destroy(struct dm_bio_prison *prison);
/*
struct dm_bio_prison_cell *cell);
/*
- * Creates, or retrieves a cell for the given key.
+ * Creates, or retrieves a cell that overlaps the given key.
*
* Returns 1 if pre-existing cell returned, zero if new cell created using
* @cell_prealloc.
struct dm_bio_prison_cell **cell_result);
/*
- * An atomic op that combines retrieving a cell, and adding a bio to it.
+ * An atomic op that combines retrieving or creating a cell, and adding a
+ * bio to it.
*
* Returns 1 if the cell was already held, 0 if @inmate is the new holder.
*/
void dm_cell_error(struct dm_bio_prison *prison,
struct dm_bio_prison_cell *cell, int error);
+/*
+ * Visits the cell and then releases. Guarantees no new inmates are
+ * inserted between the visit and release.
+ */
+void dm_cell_visit_release(struct dm_bio_prison *prison,
+ void (*visit_fn)(void *, struct dm_bio_prison_cell *),
+ void *context, struct dm_bio_prison_cell *cell);
+
/*----------------------------------------------------------------*/
/*
#include <linux/vmalloc.h>
#include <linux/shrinker.h>
#include <linux/module.h>
+#include <linux/rbtree.h>
#define DM_MSG_PREFIX "bufio"
/*
* Check buffer ages in this interval (seconds)
*/
-#define DM_BUFIO_WORK_TIMER_SECS 10
+#define DM_BUFIO_WORK_TIMER_SECS 30
/*
* Free buffers when they are older than this (seconds)
*/
-#define DM_BUFIO_DEFAULT_AGE_SECS 60
+#define DM_BUFIO_DEFAULT_AGE_SECS 300
/*
- * The number of bvec entries that are embedded directly in the buffer.
- * If the chunk size is larger, dm-io is used to do the io.
+ * The nr of bytes of cached data to keep around.
*/
-#define DM_BUFIO_INLINE_VECS 16
+#define DM_BUFIO_DEFAULT_RETAIN_BYTES (256 * 1024)
/*
- * Buffer hash
+ * The number of bvec entries that are embedded directly in the buffer.
+ * If the chunk size is larger, dm-io is used to do the io.
*/
-#define DM_BUFIO_HASH_BITS 20
-#define DM_BUFIO_HASH(block) \
- ((((block) >> DM_BUFIO_HASH_BITS) ^ (block)) & \
- ((1 << DM_BUFIO_HASH_BITS) - 1))
+#define DM_BUFIO_INLINE_VECS 16
/*
* Don't try to use kmem_cache_alloc for blocks larger than this.
unsigned minimum_buffers;
- struct hlist_head *cache_hash;
+ struct rb_root buffer_tree;
wait_queue_head_t free_buffer_wait;
int async_write_error;
};
struct dm_buffer {
- struct hlist_node hash_list;
+ struct rb_node node;
struct list_head lru_list;
sector_t block;
void *data;
* Buffers are freed after this timeout
*/
static unsigned dm_bufio_max_age = DM_BUFIO_DEFAULT_AGE_SECS;
+static unsigned dm_bufio_retain_bytes = DM_BUFIO_DEFAULT_RETAIN_BYTES;
static unsigned long dm_bufio_peak_allocated;
static unsigned long dm_bufio_allocated_kmem_cache;
*/
static DEFINE_MUTEX(dm_bufio_clients_lock);
+/*----------------------------------------------------------------
+ * A red/black tree acts as an index for all the buffers.
+ *--------------------------------------------------------------*/
+static struct dm_buffer *__find(struct dm_bufio_client *c, sector_t block)
+{
+ struct rb_node *n = c->buffer_tree.rb_node;
+ struct dm_buffer *b;
+
+ while (n) {
+ b = container_of(n, struct dm_buffer, node);
+
+ if (b->block == block)
+ return b;
+
+ n = (b->block < block) ? n->rb_left : n->rb_right;
+ }
+
+ return NULL;
+}
+
+static void __insert(struct dm_bufio_client *c, struct dm_buffer *b)
+{
+ struct rb_node **new = &c->buffer_tree.rb_node, *parent = NULL;
+ struct dm_buffer *found;
+
+ while (*new) {
+ found = container_of(*new, struct dm_buffer, node);
+
+ if (found->block == b->block) {
+ BUG_ON(found != b);
+ return;
+ }
+
+ parent = *new;
+ new = (found->block < b->block) ?
+ &((*new)->rb_left) : &((*new)->rb_right);
+ }
+
+ rb_link_node(&b->node, parent, new);
+ rb_insert_color(&b->node, &c->buffer_tree);
+}
+
+static void __remove(struct dm_bufio_client *c, struct dm_buffer *b)
+{
+ rb_erase(&b->node, &c->buffer_tree);
+}
+
/*----------------------------------------------------------------*/
static void adjust_total_allocated(enum data_mode data_mode, long diff)
b->block = block;
b->list_mode = dirty;
list_add(&b->lru_list, &c->lru[dirty]);
- hlist_add_head(&b->hash_list, &c->cache_hash[DM_BUFIO_HASH(block)]);
+ __insert(b->c, b);
b->last_accessed = jiffies;
}
BUG_ON(!c->n_buffers[b->list_mode]);
c->n_buffers[b->list_mode]--;
- hlist_del(&b->hash_list);
+ __remove(b->c, b);
list_del(&b->lru_list);
}
end_io(&b->bio, r);
}
+static void inline_endio(struct bio *bio, int error)
+{
+ bio_end_io_t *end_fn = bio->bi_private;
+
+ /*
+ * Reset the bio to free any attached resources
+ * (e.g. bio integrity profiles).
+ */
+ bio_reset(bio);
+
+ end_fn(bio, error);
+}
+
static void use_inline_bio(struct dm_buffer *b, int rw, sector_t block,
bio_end_io_t *end_io)
{
b->bio.bi_max_vecs = DM_BUFIO_INLINE_VECS;
b->bio.bi_iter.bi_sector = block << b->c->sectors_per_block_bits;
b->bio.bi_bdev = b->c->bdev;
- b->bio.bi_end_io = end_io;
+ b->bio.bi_end_io = inline_endio;
+ /*
+ * Use of .bi_private isn't a problem here because
+ * the dm_buffer's inline bio is local to bufio.
+ */
+ b->bio.bi_private = end_io;
/*
* We assume that if len >= PAGE_SIZE ptr is page-aligned.
__write_dirty_buffers_async(c, 1, write_list);
}
-/*
- * Find a buffer in the hash.
- */
-static struct dm_buffer *__find(struct dm_bufio_client *c, sector_t block)
-{
- struct dm_buffer *b;
-
- hlist_for_each_entry(b, &c->cache_hash[DM_BUFIO_HASH(block)],
- hash_list) {
- dm_bufio_cond_resched();
- if (b->block == block)
- return b;
- }
-
- return NULL;
-}
-
/*----------------------------------------------------------------
* Getting a buffer
*--------------------------------------------------------------*/
}
/*
- * Test if the buffer is unused and too old, and commit it.
- * At if noio is set, we must not do any I/O because we hold
- * dm_bufio_clients_lock and we would risk deadlock if the I/O gets rerouted to
- * different bufio client.
+ * We may not be able to evict this buffer if IO pending or the client
+ * is still using it. Caller is expected to know buffer is too old.
+ *
+ * And if GFP_NOFS is used, we must not do any I/O because we hold
+ * dm_bufio_clients_lock and we would risk deadlock if the I/O gets
+ * rerouted to different bufio client.
*/
-static int __cleanup_old_buffer(struct dm_buffer *b, gfp_t gfp,
- unsigned long max_jiffies)
+static bool __try_evict_buffer(struct dm_buffer *b, gfp_t gfp)
{
- if (jiffies - b->last_accessed < max_jiffies)
- return 0;
-
- if (!(gfp & __GFP_IO)) {
+ if (!(gfp & __GFP_FS)) {
if (test_bit(B_READING, &b->state) ||
test_bit(B_WRITING, &b->state) ||
test_bit(B_DIRTY, &b->state))
- return 0;
+ return false;
}
if (b->hold_count)
- return 0;
+ return false;
__make_buffer_clean(b);
__unlink_buffer(b);
__free_buffer_wake(b);
- return 1;
+ return true;
}
-static long __scan(struct dm_bufio_client *c, unsigned long nr_to_scan,
- gfp_t gfp_mask)
+static unsigned get_retain_buffers(struct dm_bufio_client *c)
+{
+ unsigned retain_bytes = ACCESS_ONCE(dm_bufio_retain_bytes);
+ return retain_bytes / c->block_size;
+}
+
+static unsigned long __scan(struct dm_bufio_client *c, unsigned long nr_to_scan,
+ gfp_t gfp_mask)
{
int l;
struct dm_buffer *b, *tmp;
- long freed = 0;
+ unsigned long freed = 0;
+ unsigned long count = nr_to_scan;
+ unsigned retain_target = get_retain_buffers(c);
for (l = 0; l < LIST_SIZE; l++) {
list_for_each_entry_safe_reverse(b, tmp, &c->lru[l], lru_list) {
- freed += __cleanup_old_buffer(b, gfp_mask, 0);
- if (!--nr_to_scan)
+ if (__try_evict_buffer(b, gfp_mask))
+ freed++;
+ if (!--nr_to_scan || ((count - freed) <= retain_target))
return freed;
dm_bufio_cond_resched();
}
unsigned long freed;
c = container_of(shrink, struct dm_bufio_client, shrinker);
- if (sc->gfp_mask & __GFP_IO)
+ if (sc->gfp_mask & __GFP_FS)
dm_bufio_lock(c);
else if (!dm_bufio_trylock(c))
return SHRINK_STOP;
unsigned long count;
c = container_of(shrink, struct dm_bufio_client, shrinker);
- if (sc->gfp_mask & __GFP_IO)
+ if (sc->gfp_mask & __GFP_FS)
dm_bufio_lock(c);
else if (!dm_bufio_trylock(c))
return 0;
r = -ENOMEM;
goto bad_client;
}
- c->cache_hash = vmalloc(sizeof(struct hlist_head) << DM_BUFIO_HASH_BITS);
- if (!c->cache_hash) {
- r = -ENOMEM;
- goto bad_hash;
- }
+ c->buffer_tree = RB_ROOT;
c->bdev = bdev;
c->block_size = block_size;
c->n_buffers[i] = 0;
}
- for (i = 0; i < 1 << DM_BUFIO_HASH_BITS; i++)
- INIT_HLIST_HEAD(&c->cache_hash[i]);
-
mutex_init(&c->lock);
INIT_LIST_HEAD(&c->reserved_buffers);
c->need_reserved_buffers = reserved_buffers;
}
dm_io_client_destroy(c->dm_io);
bad_dm_io:
- vfree(c->cache_hash);
-bad_hash:
kfree(c);
bad_client:
return ERR_PTR(r);
mutex_unlock(&dm_bufio_clients_lock);
- for (i = 0; i < 1 << DM_BUFIO_HASH_BITS; i++)
- BUG_ON(!hlist_empty(&c->cache_hash[i]));
-
+ BUG_ON(!RB_EMPTY_ROOT(&c->buffer_tree));
BUG_ON(c->need_reserved_buffers);
while (!list_empty(&c->reserved_buffers)) {
BUG_ON(c->n_buffers[i]);
dm_io_client_destroy(c->dm_io);
- vfree(c->cache_hash);
kfree(c);
}
EXPORT_SYMBOL_GPL(dm_bufio_client_destroy);
-static void cleanup_old_buffers(void)
+static unsigned get_max_age_hz(void)
{
- unsigned long max_age = ACCESS_ONCE(dm_bufio_max_age);
- struct dm_bufio_client *c;
+ unsigned max_age = ACCESS_ONCE(dm_bufio_max_age);
- if (max_age > ULONG_MAX / HZ)
- max_age = ULONG_MAX / HZ;
+ if (max_age > UINT_MAX / HZ)
+ max_age = UINT_MAX / HZ;
- mutex_lock(&dm_bufio_clients_lock);
- list_for_each_entry(c, &dm_bufio_all_clients, client_list) {
- if (!dm_bufio_trylock(c))
- continue;
+ return max_age * HZ;
+}
- while (!list_empty(&c->lru[LIST_CLEAN])) {
- struct dm_buffer *b;
- b = list_entry(c->lru[LIST_CLEAN].prev,
- struct dm_buffer, lru_list);
- if (!__cleanup_old_buffer(b, 0, max_age * HZ))
- break;
- dm_bufio_cond_resched();
- }
+static bool older_than(struct dm_buffer *b, unsigned long age_hz)
+{
+ return (jiffies - b->last_accessed) >= age_hz;
+}
+
+static void __evict_old_buffers(struct dm_bufio_client *c, unsigned long age_hz)
+{
+ struct dm_buffer *b, *tmp;
+ unsigned retain_target = get_retain_buffers(c);
+ unsigned count;
+
+ dm_bufio_lock(c);
+
+ count = c->n_buffers[LIST_CLEAN] + c->n_buffers[LIST_DIRTY];
+ list_for_each_entry_safe_reverse(b, tmp, &c->lru[LIST_CLEAN], lru_list) {
+ if (count <= retain_target)
+ break;
+
+ if (!older_than(b, age_hz))
+ break;
+
+ if (__try_evict_buffer(b, 0))
+ count--;
- dm_bufio_unlock(c);
dm_bufio_cond_resched();
}
+
+ dm_bufio_unlock(c);
+}
+
+static void cleanup_old_buffers(void)
+{
+ unsigned long max_age_hz = get_max_age_hz();
+ struct dm_bufio_client *c;
+
+ mutex_lock(&dm_bufio_clients_lock);
+
+ list_for_each_entry(c, &dm_bufio_all_clients, client_list)
+ __evict_old_buffers(c, max_age_hz);
+
mutex_unlock(&dm_bufio_clients_lock);
}
module_param_named(max_age_seconds, dm_bufio_max_age, uint, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(max_age_seconds, "Max age of a buffer in seconds");
+module_param_named(retain_bytes, dm_bufio_retain_bytes, uint, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(retain_bytes, "Try to keep at least this many bytes cached in memory");
+
module_param_named(peak_allocated_bytes, dm_bufio_peak_allocated, ulong, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(peak_allocated_bytes, "Tracks the maximum allocated memory");
typedef dm_block_t __bitwise__ dm_oblock_t;
typedef uint32_t __bitwise__ dm_cblock_t;
+typedef dm_block_t __bitwise__ dm_dblock_t;
static inline dm_oblock_t to_oblock(dm_block_t b)
{
return (__force uint32_t) b;
}
+static inline dm_dblock_t to_dblock(dm_block_t b)
+{
+ return (__force dm_dblock_t) b;
+}
+
+static inline dm_block_t from_dblock(dm_dblock_t b)
+{
+ return (__force dm_block_t) b;
+}
+
#endif /* DM_CACHE_BLOCK_TYPES_H */
dm_block_t discard_root;
sector_t discard_block_size;
- dm_oblock_t discard_nr_blocks;
+ dm_dblock_t discard_nr_blocks;
sector_t data_block_size;
dm_cblock_t cache_blocks;
disk_super->hint_root = cpu_to_le64(cmd->hint_root);
disk_super->discard_root = cpu_to_le64(cmd->discard_root);
disk_super->discard_block_size = cpu_to_le64(cmd->discard_block_size);
- disk_super->discard_nr_blocks = cpu_to_le64(from_oblock(cmd->discard_nr_blocks));
+ disk_super->discard_nr_blocks = cpu_to_le64(from_dblock(cmd->discard_nr_blocks));
disk_super->metadata_block_size = cpu_to_le32(DM_CACHE_METADATA_BLOCK_SIZE);
disk_super->data_block_size = cpu_to_le32(cmd->data_block_size);
disk_super->cache_blocks = cpu_to_le32(0);
cmd->hint_root = le64_to_cpu(disk_super->hint_root);
cmd->discard_root = le64_to_cpu(disk_super->discard_root);
cmd->discard_block_size = le64_to_cpu(disk_super->discard_block_size);
- cmd->discard_nr_blocks = to_oblock(le64_to_cpu(disk_super->discard_nr_blocks));
+ cmd->discard_nr_blocks = to_dblock(le64_to_cpu(disk_super->discard_nr_blocks));
cmd->data_block_size = le32_to_cpu(disk_super->data_block_size);
cmd->cache_blocks = to_cblock(le32_to_cpu(disk_super->cache_blocks));
strncpy(cmd->policy_name, disk_super->policy_name, sizeof(cmd->policy_name));
disk_super->hint_root = cpu_to_le64(cmd->hint_root);
disk_super->discard_root = cpu_to_le64(cmd->discard_root);
disk_super->discard_block_size = cpu_to_le64(cmd->discard_block_size);
- disk_super->discard_nr_blocks = cpu_to_le64(from_oblock(cmd->discard_nr_blocks));
+ disk_super->discard_nr_blocks = cpu_to_le64(from_dblock(cmd->discard_nr_blocks));
disk_super->cache_blocks = cpu_to_le32(from_cblock(cmd->cache_blocks));
strncpy(disk_super->policy_name, cmd->policy_name, sizeof(disk_super->policy_name));
disk_super->policy_version[0] = cpu_to_le32(cmd->policy_version[0]);
int dm_cache_discard_bitset_resize(struct dm_cache_metadata *cmd,
sector_t discard_block_size,
- dm_oblock_t new_nr_entries)
+ dm_dblock_t new_nr_entries)
{
int r;
down_write(&cmd->root_lock);
r = dm_bitset_resize(&cmd->discard_info,
cmd->discard_root,
- from_oblock(cmd->discard_nr_blocks),
- from_oblock(new_nr_entries),
+ from_dblock(cmd->discard_nr_blocks),
+ from_dblock(new_nr_entries),
false, &cmd->discard_root);
if (!r) {
cmd->discard_block_size = discard_block_size;
return r;
}
-static int __set_discard(struct dm_cache_metadata *cmd, dm_oblock_t b)
+static int __set_discard(struct dm_cache_metadata *cmd, dm_dblock_t b)
{
return dm_bitset_set_bit(&cmd->discard_info, cmd->discard_root,
- from_oblock(b), &cmd->discard_root);
+ from_dblock(b), &cmd->discard_root);
}
-static int __clear_discard(struct dm_cache_metadata *cmd, dm_oblock_t b)
+static int __clear_discard(struct dm_cache_metadata *cmd, dm_dblock_t b)
{
return dm_bitset_clear_bit(&cmd->discard_info, cmd->discard_root,
- from_oblock(b), &cmd->discard_root);
+ from_dblock(b), &cmd->discard_root);
}
-static int __is_discarded(struct dm_cache_metadata *cmd, dm_oblock_t b,
+static int __is_discarded(struct dm_cache_metadata *cmd, dm_dblock_t b,
bool *is_discarded)
{
return dm_bitset_test_bit(&cmd->discard_info, cmd->discard_root,
- from_oblock(b), &cmd->discard_root,
+ from_dblock(b), &cmd->discard_root,
is_discarded);
}
static int __discard(struct dm_cache_metadata *cmd,
- dm_oblock_t dblock, bool discard)
+ dm_dblock_t dblock, bool discard)
{
int r;
}
int dm_cache_set_discard(struct dm_cache_metadata *cmd,
- dm_oblock_t dblock, bool discard)
+ dm_dblock_t dblock, bool discard)
{
int r;
dm_block_t b;
bool discard;
- for (b = 0; b < from_oblock(cmd->discard_nr_blocks); b++) {
- dm_oblock_t dblock = to_oblock(b);
+ for (b = 0; b < from_dblock(cmd->discard_nr_blocks); b++) {
+ dm_dblock_t dblock = to_dblock(b);
if (cmd->clean_when_opened) {
r = __is_discarded(cmd, dblock, &discard);
int dm_cache_discard_bitset_resize(struct dm_cache_metadata *cmd,
sector_t discard_block_size,
- dm_oblock_t new_nr_entries);
+ dm_dblock_t new_nr_entries);
typedef int (*load_discard_fn)(void *context, sector_t discard_block_size,
- dm_oblock_t dblock, bool discarded);
+ dm_dblock_t dblock, bool discarded);
int dm_cache_load_discards(struct dm_cache_metadata *cmd,
load_discard_fn fn, void *context);
-int dm_cache_set_discard(struct dm_cache_metadata *cmd, dm_oblock_t dblock, bool discard);
+int dm_cache_set_discard(struct dm_cache_metadata *cmd, dm_dblock_t dblock, bool discard);
int dm_cache_remove_mapping(struct dm_cache_metadata *cmd, dm_cblock_t cblock);
int dm_cache_insert_mapping(struct dm_cache_metadata *cmd, dm_cblock_t cblock, dm_oblock_t oblock);
* Gives us the oldest entry of the lowest popoulated level. If the first
* level is emptied then we shift down one level.
*/
-static struct list_head *queue_pop(struct queue *q)
+static struct list_head *queue_peek(struct queue *q)
{
unsigned level;
- struct list_head *r;
for (level = 0; level < NR_QUEUE_LEVELS; level++)
- if (!list_empty(q->qs + level)) {
- r = q->qs[level].next;
- list_del(r);
+ if (!list_empty(q->qs + level))
+ return q->qs[level].next;
- /* have we just emptied the bottom level? */
- if (level == 0 && list_empty(q->qs))
- queue_shift_down(q);
+ return NULL;
+}
- return r;
- }
+static struct list_head *queue_pop(struct queue *q)
+{
+ struct list_head *r = queue_peek(q);
- return NULL;
+ if (r) {
+ list_del(r);
+
+ /* have we just emptied the bottom level? */
+ if (list_empty(q->qs))
+ queue_shift_down(q);
+ }
+
+ return r;
}
static struct list_head *list_pop(struct list_head *lh)
unsigned generation;
unsigned generation_period; /* in lookups (will probably change) */
- /*
- * Entries in the pre_cache whose hit count passes the promotion
- * threshold move to the cache proper. Working out the correct
- * value for the promotion_threshold is crucial to this policy.
- */
- unsigned promote_threshold;
-
unsigned discard_promote_adjustment;
unsigned read_promote_adjustment;
unsigned write_promote_adjustment;
#define DEFAULT_DISCARD_PROMOTE_ADJUSTMENT 1
#define DEFAULT_READ_PROMOTE_ADJUSTMENT 4
#define DEFAULT_WRITE_PROMOTE_ADJUSTMENT 8
+#define DISCOURAGE_DEMOTING_DIRTY_THRESHOLD 128
/*----------------------------------------------------------------*/
return e;
}
+static struct entry *peek(struct queue *q)
+{
+ struct list_head *h = queue_peek(q);
+ return h ? container_of(h, struct entry, list) : NULL;
+}
+
/*
* Has this entry already been updated?
*/
break;
}
}
-
- mq->promote_threshold = nr ? total / nr : 1;
- if (mq->promote_threshold * nr < total)
- mq->promote_threshold++;
}
}
return 0;
}
+/*
+ * Entries in the pre_cache whose hit count passes the promotion
+ * threshold move to the cache proper. Working out the correct
+ * value for the promotion_threshold is crucial to this policy.
+ */
+static unsigned promote_threshold(struct mq_policy *mq)
+{
+ struct entry *e;
+
+ if (any_free_cblocks(mq))
+ return 0;
+
+ e = peek(&mq->cache_clean);
+ if (e)
+ return e->hit_count;
+
+ e = peek(&mq->cache_dirty);
+ if (e)
+ return e->hit_count + DISCOURAGE_DEMOTING_DIRTY_THRESHOLD;
+
+ /* This should never happen */
+ return 0;
+}
+
/*
* We modify the basic promotion_threshold depending on the specific io.
*
bool discarded_oblock, int data_dir)
{
if (data_dir == READ)
- return mq->promote_threshold + mq->read_promote_adjustment;
+ return promote_threshold(mq) + mq->read_promote_adjustment;
if (discarded_oblock && (any_free_cblocks(mq) || any_clean_cblocks(mq))) {
/*
return mq->discard_promote_adjustment;
}
- return mq->promote_threshold + mq->write_promote_adjustment;
+ return promote_threshold(mq) + mq->write_promote_adjustment;
}
static bool should_promote(struct mq_policy *mq, struct entry *e,
if (e && in_cache(mq, e))
r = cache_entry_found(mq, e, result);
- else if (iot_pattern(&mq->tracker) == PATTERN_SEQUENTIAL)
+ else if (mq->tracker.thresholds[PATTERN_SEQUENTIAL] &&
+ iot_pattern(&mq->tracker) == PATTERN_SEQUENTIAL)
result->op = POLICY_MISS;
else if (e)
mq->tick = 0;
mq->hit_count = 0;
mq->generation = 0;
- mq->promote_threshold = 0;
mq->discard_promote_adjustment = DEFAULT_DISCARD_PROMOTE_ADJUSTMENT;
mq->read_promote_adjustment = DEFAULT_READ_PROMOTE_ADJUSTMENT;
mq->write_promote_adjustment = DEFAULT_WRITE_PROMOTE_ADJUSTMENT;
static struct dm_cache_policy_type mq_policy_type = {
.name = "mq",
- .version = {1, 2, 0},
+ .version = {1, 3, 0},
.hint_size = 4,
.owner = THIS_MODULE,
.create = mq_create
static struct dm_cache_policy_type default_policy_type = {
.name = "default",
- .version = {1, 2, 0},
+ .version = {1, 3, 0},
.hint_size = 4,
.owner = THIS_MODULE,
.create = mq_create,
/*----------------------------------------------------------------*/
-#define PRISON_CELLS 1024
#define MIGRATION_POOL_SIZE 128
#define COMMIT_PERIOD HZ
#define MIGRATION_COUNT_WINDOW 10
/*
* origin_blocks entries, discarded if set.
*/
- dm_oblock_t discard_nr_blocks;
+ dm_dblock_t discard_nr_blocks;
unsigned long *discard_bitset;
+ uint32_t discard_block_size; /* a power of 2 times sectors per block */
/*
* Rather than reconstructing the table line for the status we just
dm_cblock_t cblock;
bool err:1;
+ bool discard:1;
bool writeback:1;
bool demote:1;
bool promote:1;
/*----------------------------------------------------------------*/
-static void build_key(dm_oblock_t oblock, struct dm_cell_key *key)
+static void build_key(dm_oblock_t begin, dm_oblock_t end, struct dm_cell_key *key)
{
key->virtual = 0;
key->dev = 0;
- key->block = from_oblock(oblock);
+ key->block_begin = from_oblock(begin);
+ key->block_end = from_oblock(end);
}
/*
*/
typedef void (*cell_free_fn)(void *context, struct dm_bio_prison_cell *cell);
-static int bio_detain(struct cache *cache, dm_oblock_t oblock,
- struct bio *bio, struct dm_bio_prison_cell *cell_prealloc,
- cell_free_fn free_fn, void *free_context,
- struct dm_bio_prison_cell **cell_result)
+static int bio_detain_range(struct cache *cache, dm_oblock_t oblock_begin, dm_oblock_t oblock_end,
+ struct bio *bio, struct dm_bio_prison_cell *cell_prealloc,
+ cell_free_fn free_fn, void *free_context,
+ struct dm_bio_prison_cell **cell_result)
{
int r;
struct dm_cell_key key;
- build_key(oblock, &key);
+ build_key(oblock_begin, oblock_end, &key);
r = dm_bio_detain(cache->prison, &key, bio, cell_prealloc, cell_result);
if (r)
free_fn(free_context, cell_prealloc);
return r;
}
+static int bio_detain(struct cache *cache, dm_oblock_t oblock,
+ struct bio *bio, struct dm_bio_prison_cell *cell_prealloc,
+ cell_free_fn free_fn, void *free_context,
+ struct dm_bio_prison_cell **cell_result)
+{
+ dm_oblock_t end = to_oblock(from_oblock(oblock) + 1ULL);
+ return bio_detain_range(cache, oblock, end, bio,
+ cell_prealloc, free_fn, free_context, cell_result);
+}
+
static int get_cell(struct cache *cache,
dm_oblock_t oblock,
struct prealloc *structs,
cell_prealloc = prealloc_get_cell(structs);
- build_key(oblock, &key);
+ build_key(oblock, to_oblock(from_oblock(oblock) + 1ULL), &key);
r = dm_get_cell(cache->prison, &key, cell_prealloc, cell_result);
if (r)
prealloc_put_cell(structs, cell_prealloc);
return b;
}
-static void set_discard(struct cache *cache, dm_oblock_t b)
+static dm_block_t oblocks_per_dblock(struct cache *cache)
+{
+ dm_block_t oblocks = cache->discard_block_size;
+
+ if (block_size_is_power_of_two(cache))
+ oblocks >>= cache->sectors_per_block_shift;
+ else
+ oblocks = block_div(oblocks, cache->sectors_per_block);
+
+ return oblocks;
+}
+
+static dm_dblock_t oblock_to_dblock(struct cache *cache, dm_oblock_t oblock)
+{
+ return to_dblock(block_div(from_oblock(oblock),
+ oblocks_per_dblock(cache)));
+}
+
+static dm_oblock_t dblock_to_oblock(struct cache *cache, dm_dblock_t dblock)
+{
+ return to_oblock(from_dblock(dblock) * oblocks_per_dblock(cache));
+}
+
+static void set_discard(struct cache *cache, dm_dblock_t b)
{
unsigned long flags;
+ BUG_ON(from_dblock(b) >= from_dblock(cache->discard_nr_blocks));
atomic_inc(&cache->stats.discard_count);
spin_lock_irqsave(&cache->lock, flags);
- set_bit(from_oblock(b), cache->discard_bitset);
+ set_bit(from_dblock(b), cache->discard_bitset);
spin_unlock_irqrestore(&cache->lock, flags);
}
-static void clear_discard(struct cache *cache, dm_oblock_t b)
+static void clear_discard(struct cache *cache, dm_dblock_t b)
{
unsigned long flags;
spin_lock_irqsave(&cache->lock, flags);
- clear_bit(from_oblock(b), cache->discard_bitset);
+ clear_bit(from_dblock(b), cache->discard_bitset);
spin_unlock_irqrestore(&cache->lock, flags);
}
-static bool is_discarded(struct cache *cache, dm_oblock_t b)
+static bool is_discarded(struct cache *cache, dm_dblock_t b)
{
int r;
unsigned long flags;
spin_lock_irqsave(&cache->lock, flags);
- r = test_bit(from_oblock(b), cache->discard_bitset);
+ r = test_bit(from_dblock(b), cache->discard_bitset);
spin_unlock_irqrestore(&cache->lock, flags);
return r;
unsigned long flags;
spin_lock_irqsave(&cache->lock, flags);
- r = test_bit(from_oblock(b), cache->discard_bitset);
+ r = test_bit(from_dblock(oblock_to_dblock(cache, b)),
+ cache->discard_bitset);
spin_unlock_irqrestore(&cache->lock, flags);
return r;
check_if_tick_bio_needed(cache, bio);
remap_to_origin(cache, bio);
if (bio_data_dir(bio) == WRITE)
- clear_discard(cache, oblock);
+ clear_discard(cache, oblock_to_dblock(cache, oblock));
}
static void remap_to_cache_dirty(struct cache *cache, struct bio *bio,
remap_to_cache(cache, bio, cblock);
if (bio_data_dir(bio) == WRITE) {
set_dirty(cache, oblock, cblock);
- clear_discard(cache, oblock);
+ clear_discard(cache, oblock_to_dblock(cache, oblock));
}
}
}
} else {
- clear_dirty(cache, mg->new_oblock, mg->cblock);
- if (mg->requeue_holder)
+ if (mg->requeue_holder) {
+ clear_dirty(cache, mg->new_oblock, mg->cblock);
cell_defer(cache, mg->new_ocell, true);
- else {
+ } else {
+ /*
+ * The block was promoted via an overwrite, so it's dirty.
+ */
+ set_dirty(cache, mg->new_oblock, mg->cblock);
bio_endio(mg->new_ocell->holder, 0);
cell_defer(cache, mg->new_ocell, false);
}
wake_worker(cache);
}
-static void issue_copy_real(struct dm_cache_migration *mg)
+static void issue_copy(struct dm_cache_migration *mg)
{
int r;
struct dm_io_region o_region, c_region;
migration_success_pre_commit(mg);
}
-static void issue_copy(struct dm_cache_migration *mg)
+static void calc_discard_block_range(struct cache *cache, struct bio *bio,
+ dm_dblock_t *b, dm_dblock_t *e)
+{
+ sector_t sb = bio->bi_iter.bi_sector;
+ sector_t se = bio_end_sector(bio);
+
+ *b = to_dblock(dm_sector_div_up(sb, cache->discard_block_size));
+
+ if (se - sb < cache->discard_block_size)
+ *e = *b;
+ else
+ *e = to_dblock(block_div(se, cache->discard_block_size));
+}
+
+static void issue_discard(struct dm_cache_migration *mg)
+{
+ dm_dblock_t b, e;
+ struct bio *bio = mg->new_ocell->holder;
+
+ calc_discard_block_range(mg->cache, bio, &b, &e);
+ while (b != e) {
+ set_discard(mg->cache, b);
+ b = to_dblock(from_dblock(b) + 1);
+ }
+
+ bio_endio(bio, 0);
+ cell_defer(mg->cache, mg->new_ocell, false);
+ free_migration(mg);
+}
+
+static void issue_copy_or_discard(struct dm_cache_migration *mg)
{
bool avoid;
struct cache *cache = mg->cache;
+ if (mg->discard) {
+ issue_discard(mg);
+ return;
+ }
+
if (mg->writeback || mg->demote)
avoid = !is_dirty(cache, mg->cblock) ||
is_discarded_oblock(cache, mg->old_oblock);
avoid = is_discarded_oblock(cache, mg->new_oblock);
- if (!avoid && bio_writes_complete_block(cache, bio)) {
+ if (writeback_mode(&cache->features) &&
+ !avoid && bio_writes_complete_block(cache, bio)) {
issue_overwrite(mg, bio);
return;
}
}
- avoid ? avoid_copy(mg) : issue_copy_real(mg);
+ avoid ? avoid_copy(mg) : issue_copy(mg);
}
static void complete_migration(struct dm_cache_migration *mg)
struct dm_cache_migration *mg = prealloc_get_migration(structs);
mg->err = false;
+ mg->discard = false;
mg->writeback = false;
mg->demote = false;
mg->promote = true;
struct dm_cache_migration *mg = prealloc_get_migration(structs);
mg->err = false;
+ mg->discard = false;
mg->writeback = true;
mg->demote = false;
mg->promote = false;
struct dm_cache_migration *mg = prealloc_get_migration(structs);
mg->err = false;
+ mg->discard = false;
mg->writeback = false;
mg->demote = true;
mg->promote = true;
struct dm_cache_migration *mg = prealloc_get_migration(structs);
mg->err = false;
+ mg->discard = false;
mg->writeback = false;
mg->demote = true;
mg->promote = false;
quiesce_migration(mg);
}
+static void discard(struct cache *cache, struct prealloc *structs,
+ struct dm_bio_prison_cell *cell)
+{
+ struct dm_cache_migration *mg = prealloc_get_migration(structs);
+
+ mg->err = false;
+ mg->discard = true;
+ mg->writeback = false;
+ mg->demote = false;
+ mg->promote = false;
+ mg->requeue_holder = false;
+ mg->invalidate = false;
+ mg->cache = cache;
+ mg->old_ocell = NULL;
+ mg->new_ocell = cell;
+ mg->start_jiffies = jiffies;
+
+ quiesce_migration(mg);
+}
+
/*----------------------------------------------------------------
* bio processing
*--------------------------------------------------------------*/
issue(cache, bio);
}
-/*
- * People generally discard large parts of a device, eg, the whole device
- * when formatting. Splitting these large discards up into cache block
- * sized ios and then quiescing (always neccessary for discard) takes too
- * long.
- *
- * We keep it simple, and allow any size of discard to come in, and just
- * mark off blocks on the discard bitset. No passdown occurs!
- *
- * To implement passdown we need to change the bio_prison such that a cell
- * can have a key that spans many blocks.
- */
-static void process_discard_bio(struct cache *cache, struct bio *bio)
+static void process_discard_bio(struct cache *cache, struct prealloc *structs,
+ struct bio *bio)
{
- dm_block_t start_block = dm_sector_div_up(bio->bi_iter.bi_sector,
- cache->sectors_per_block);
- dm_block_t end_block = bio_end_sector(bio);
- dm_block_t b;
+ int r;
+ dm_dblock_t b, e;
+ struct dm_bio_prison_cell *cell_prealloc, *new_ocell;
- end_block = block_div(end_block, cache->sectors_per_block);
+ calc_discard_block_range(cache, bio, &b, &e);
+ if (b == e) {
+ bio_endio(bio, 0);
+ return;
+ }
- for (b = start_block; b < end_block; b++)
- set_discard(cache, to_oblock(b));
+ cell_prealloc = prealloc_get_cell(structs);
+ r = bio_detain_range(cache, dblock_to_oblock(cache, b), dblock_to_oblock(cache, e), bio, cell_prealloc,
+ (cell_free_fn) prealloc_put_cell,
+ structs, &new_ocell);
+ if (r > 0)
+ return;
- bio_endio(bio, 0);
+ discard(cache, structs, new_ocell);
}
static bool spare_migration_bandwidth(struct cache *cache)
dm_oblock_t block = get_bio_block(cache, bio);
struct dm_bio_prison_cell *cell_prealloc, *old_ocell, *new_ocell;
struct policy_result lookup_result;
- bool discarded_block = is_discarded_oblock(cache, block);
bool passthrough = passthrough_mode(&cache->features);
- bool can_migrate = !passthrough && (discarded_block || spare_migration_bandwidth(cache));
+ bool discarded_block, can_migrate;
/*
* Check to see if that block is currently migrating.
if (r > 0)
return;
+ discarded_block = is_discarded_oblock(cache, block);
+ can_migrate = !passthrough && (discarded_block || spare_migration_bandwidth(cache));
+
r = policy_map(cache->policy, block, true, can_migrate, discarded_block,
bio, &lookup_result);
if (bio->bi_rw & REQ_FLUSH)
process_flush_bio(cache, bio);
else if (bio->bi_rw & REQ_DISCARD)
- process_discard_bio(cache, bio);
+ process_discard_bio(cache, &structs, bio);
else
process_bio(cache, &structs, bio);
}
process_invalidation_requests(cache);
}
- process_migrations(cache, &cache->quiesced_migrations, issue_copy);
+ process_migrations(cache, &cache->quiesced_migrations, issue_copy_or_discard);
process_migrations(cache, &cache->completed_migrations, complete_migration);
if (commit_if_needed(cache)) {
return 0;
}
+/*
+ * We want the discard block size to be at least the size of the cache
+ * block size and have no more than 2^14 discard blocks across the origin.
+ */
+#define MAX_DISCARD_BLOCKS (1 << 14)
+
+static bool too_many_discard_blocks(sector_t discard_block_size,
+ sector_t origin_size)
+{
+ (void) sector_div(origin_size, discard_block_size);
+
+ return origin_size > MAX_DISCARD_BLOCKS;
+}
+
+static sector_t calculate_discard_block_size(sector_t cache_block_size,
+ sector_t origin_size)
+{
+ sector_t discard_block_size = cache_block_size;
+
+ if (origin_size)
+ while (too_many_discard_blocks(discard_block_size, origin_size))
+ discard_block_size *= 2;
+
+ return discard_block_size;
+}
+
+static void set_cache_size(struct cache *cache, dm_cblock_t size)
+{
+ dm_block_t nr_blocks = from_cblock(size);
+
+ if (nr_blocks > (1 << 20) && cache->cache_size != size)
+ DMWARN_LIMIT("You have created a cache device with a lot of individual cache blocks (%llu)\n"
+ "All these mappings can consume a lot of kernel memory, and take some time to read/write.\n"
+ "Please consider increasing the cache block size to reduce the overall cache block count.",
+ (unsigned long long) nr_blocks);
+
+ cache->cache_size = size;
+}
+
#define DEFAULT_MIGRATION_THRESHOLD 2048
static int cache_create(struct cache_args *ca, struct cache **result)
ti->num_discard_bios = 1;
ti->discards_supported = true;
ti->discard_zeroes_data_unsupported = true;
- /* Discard bios must be split on a block boundary */
- ti->split_discard_bios = true;
+ ti->split_discard_bios = false;
cache->features = ca->features;
ti->per_bio_data_size = get_per_bio_data_size(cache);
cache->sectors_per_block_shift = -1;
cache_size = block_div(cache_size, ca->block_size);
- cache->cache_size = to_cblock(cache_size);
+ set_cache_size(cache, to_cblock(cache_size));
} else {
cache->sectors_per_block_shift = __ffs(ca->block_size);
- cache->cache_size = to_cblock(ca->cache_sectors >> cache->sectors_per_block_shift);
+ set_cache_size(cache, to_cblock(ca->cache_sectors >> cache->sectors_per_block_shift));
}
r = create_cache_policy(cache, ca, error);
}
clear_bitset(cache->dirty_bitset, from_cblock(cache->cache_size));
- cache->discard_nr_blocks = cache->origin_blocks;
- cache->discard_bitset = alloc_bitset(from_oblock(cache->discard_nr_blocks));
+ cache->discard_block_size =
+ calculate_discard_block_size(cache->sectors_per_block,
+ cache->origin_sectors);
+ cache->discard_nr_blocks = to_dblock(dm_sector_div_up(cache->origin_sectors,
+ cache->discard_block_size));
+ cache->discard_bitset = alloc_bitset(from_dblock(cache->discard_nr_blocks));
if (!cache->discard_bitset) {
*error = "could not allocate discard bitset";
goto bad;
}
- clear_bitset(cache->discard_bitset, from_oblock(cache->discard_nr_blocks));
+ clear_bitset(cache->discard_bitset, from_dblock(cache->discard_nr_blocks));
cache->copier = dm_kcopyd_client_create(&dm_kcopyd_throttle);
if (IS_ERR(cache->copier)) {
INIT_DELAYED_WORK(&cache->waker, do_waker);
cache->last_commit_jiffies = jiffies;
- cache->prison = dm_bio_prison_create(PRISON_CELLS);
+ cache->prison = dm_bio_prison_create();
if (!cache->prison) {
*error = "could not create bio prison";
goto bad;
static int cache_map(struct dm_target *ti, struct bio *bio)
{
int r;
- struct dm_bio_prison_cell *cell;
+ struct dm_bio_prison_cell *cell = NULL;
struct cache *cache = ti->private;
r = __cache_map(cache, bio, &cell);
- if (r == DM_MAPIO_REMAPPED) {
+ if (r == DM_MAPIO_REMAPPED && cell) {
inc_ds(cache, bio, cell);
cell_defer(cache, cell, false);
}
{
unsigned i, r;
- r = dm_cache_discard_bitset_resize(cache->cmd, cache->sectors_per_block,
- cache->origin_blocks);
+ r = dm_cache_discard_bitset_resize(cache->cmd, cache->discard_block_size,
+ cache->discard_nr_blocks);
if (r) {
DMERR("could not resize on-disk discard bitset");
return r;
}
- for (i = 0; i < from_oblock(cache->discard_nr_blocks); i++) {
- r = dm_cache_set_discard(cache->cmd, to_oblock(i),
- is_discarded(cache, to_oblock(i)));
+ for (i = 0; i < from_dblock(cache->discard_nr_blocks); i++) {
+ r = dm_cache_set_discard(cache->cmd, to_dblock(i),
+ is_discarded(cache, to_dblock(i)));
if (r)
return r;
}
return 0;
}
+/*
+ * The discard block size in the on disk metadata is not
+ * neccessarily the same as we're currently using. So we have to
+ * be careful to only set the discarded attribute if we know it
+ * covers a complete block of the new size.
+ */
+struct discard_load_info {
+ struct cache *cache;
+
+ /*
+ * These blocks are sized using the on disk dblock size, rather
+ * than the current one.
+ */
+ dm_block_t block_size;
+ dm_block_t discard_begin, discard_end;
+};
+
+static void discard_load_info_init(struct cache *cache,
+ struct discard_load_info *li)
+{
+ li->cache = cache;
+ li->discard_begin = li->discard_end = 0;
+}
+
+static void set_discard_range(struct discard_load_info *li)
+{
+ sector_t b, e;
+
+ if (li->discard_begin == li->discard_end)
+ return;
+
+ /*
+ * Convert to sectors.
+ */
+ b = li->discard_begin * li->block_size;
+ e = li->discard_end * li->block_size;
+
+ /*
+ * Then convert back to the current dblock size.
+ */
+ b = dm_sector_div_up(b, li->cache->discard_block_size);
+ sector_div(e, li->cache->discard_block_size);
+
+ /*
+ * The origin may have shrunk, so we need to check we're still in
+ * bounds.
+ */
+ if (e > from_dblock(li->cache->discard_nr_blocks))
+ e = from_dblock(li->cache->discard_nr_blocks);
+
+ for (; b < e; b++)
+ set_discard(li->cache, to_dblock(b));
+}
+
static int load_discard(void *context, sector_t discard_block_size,
- dm_oblock_t oblock, bool discard)
+ dm_dblock_t dblock, bool discard)
{
- struct cache *cache = context;
+ struct discard_load_info *li = context;
- if (discard)
- set_discard(cache, oblock);
- else
- clear_discard(cache, oblock);
+ li->block_size = discard_block_size;
+
+ if (discard) {
+ if (from_dblock(dblock) == li->discard_end)
+ /*
+ * We're already in a discard range, just extend it.
+ */
+ li->discard_end = li->discard_end + 1ULL;
+
+ else {
+ /*
+ * Emit the old range and start a new one.
+ */
+ set_discard_range(li);
+ li->discard_begin = from_dblock(dblock);
+ li->discard_end = li->discard_begin + 1ULL;
+ }
+ } else {
+ set_discard_range(li);
+ li->discard_begin = li->discard_end = 0;
+ }
return 0;
}
return r;
}
- cache->cache_size = new_size;
+ set_cache_size(cache, new_size);
return 0;
}
}
if (!cache->loaded_discards) {
- r = dm_cache_load_discards(cache->cmd, load_discard, cache);
+ struct discard_load_info li;
+
+ /*
+ * The discard bitset could have been resized, or the
+ * discard block size changed. To be safe we start by
+ * setting every dblock to not discarded.
+ */
+ clear_bitset(cache->discard_bitset, from_dblock(cache->discard_nr_blocks));
+
+ discard_load_info_init(cache, &li);
+ r = dm_cache_load_discards(cache->cmd, load_discard, &li);
if (r) {
DMERR("could not load origin discards");
return r;
}
+ set_discard_range(&li);
cache->loaded_discards = true;
}
/*
* FIXME: these limits may be incompatible with the cache device
*/
- limits->max_discard_sectors = cache->sectors_per_block;
- limits->discard_granularity = cache->sectors_per_block << SECTOR_SHIFT;
+ limits->max_discard_sectors = min_t(sector_t, cache->discard_block_size * 1024,
+ cache->origin_sectors);
+ limits->discard_granularity = cache->discard_block_size << SECTOR_SHIFT;
}
static void cache_io_hints(struct dm_target *ti, struct queue_limits *limits)
static struct target_type cache_target = {
.name = "cache",
- .version = {1, 5, 0},
+ .version = {1, 6, 0},
.module = THIS_MODULE,
.ctr = cache_ctr,
.dtr = cache_dtr,
for (i = 0; i < ((1 << SECTOR_SHIFT) / 8); i++)
crypto_xor(data + i * 8, buf, 8);
out:
- memset(buf, 0, sizeof(buf));
+ memzero_explicit(buf, sizeof(buf));
return r;
}
int srcu_idx;
param->flags &= ~(DM_SUSPEND_FLAG | DM_READONLY_FLAG |
- DM_ACTIVE_PRESENT_FLAG);
+ DM_ACTIVE_PRESENT_FLAG | DM_INTERNAL_SUSPEND_FLAG);
if (dm_suspended_md(md))
param->flags |= DM_SUSPEND_FLAG;
+ if (dm_suspended_internally_md(md))
+ param->flags |= DM_INTERNAL_SUSPEND_FLAG;
+
if (dm_test_deferred_remove_flag(md))
param->flags |= DM_DEFERRED_REMOVE;
__le32 layout;
__le32 stripe_sectors;
- __u8 pad[452]; /* Round struct to 512 bytes. */
- /* Always set to 0 when writing. */
+ /* Remainder of a logical block is zero-filled when writing (see super_sync()). */
} __packed;
static int read_disk_sb(struct md_rdev *rdev, int size)
test_bit(Faulty, &(rs->dev[i].rdev.flags)))
failed_devices |= (1ULL << i);
- memset(sb, 0, sizeof(*sb));
+ memset(sb + 1, 0, rdev->sb_size - sizeof(*sb));
sb->magic = cpu_to_le32(DM_RAID_MAGIC);
sb->features = cpu_to_le32(0); /* No features yet */
uint64_t events_sb, events_refsb;
rdev->sb_start = 0;
- rdev->sb_size = sizeof(*sb);
+ rdev->sb_size = bdev_logical_block_size(rdev->meta_bdev);
+ if (rdev->sb_size < sizeof(*sb) || rdev->sb_size > PAGE_SIZE) {
+ DMERR("superblock size of a logical block is no longer valid");
+ return -EINVAL;
+ }
ret = read_disk_sb(rdev, rdev->sb_size);
if (ret)
raid456 = (rs->md.level == 4 || rs->md.level == 5 || rs->md.level == 6);
for (i = 0; i < rs->md.raid_disks; i++) {
- struct request_queue *q = bdev_get_queue(rs->dev[i].rdev.bdev);
+ struct request_queue *q;
+
+ if (!rs->dev[i].rdev.bdev)
+ continue;
+ q = bdev_get_queue(rs->dev[i].rdev.bdev);
if (!q || !blk_queue_discard(q))
return;
return 1;
id = dm_stats_create(dm_get_stats(md), start, end, step, program_id, aux_data,
- dm_internal_suspend, dm_internal_resume, md);
+ dm_internal_suspend_fast, dm_internal_resume_fast, md);
if (id < 0)
return id;
sc->stripes_shift = __ffs(stripes);
r = dm_set_target_max_io_len(ti, chunk_size);
- if (r)
+ if (r) {
+ kfree(sc);
return r;
+ }
ti->num_flush_bios = stripes;
ti->num_discard_bios = stripes;
}
EXPORT_SYMBOL(dm_table_get_mode);
-static void suspend_targets(struct dm_table *t, unsigned postsuspend)
+enum suspend_mode {
+ PRESUSPEND,
+ PRESUSPEND_UNDO,
+ POSTSUSPEND,
+};
+
+static void suspend_targets(struct dm_table *t, enum suspend_mode mode)
{
int i = t->num_targets;
struct dm_target *ti = t->targets;
while (i--) {
- if (postsuspend) {
+ switch (mode) {
+ case PRESUSPEND:
+ if (ti->type->presuspend)
+ ti->type->presuspend(ti);
+ break;
+ case PRESUSPEND_UNDO:
+ if (ti->type->presuspend_undo)
+ ti->type->presuspend_undo(ti);
+ break;
+ case POSTSUSPEND:
if (ti->type->postsuspend)
ti->type->postsuspend(ti);
- } else if (ti->type->presuspend)
- ti->type->presuspend(ti);
-
+ break;
+ }
ti++;
}
}
if (!t)
return;
- suspend_targets(t, 0);
+ suspend_targets(t, PRESUSPEND);
+}
+
+void dm_table_presuspend_undo_targets(struct dm_table *t)
+{
+ if (!t)
+ return;
+
+ suspend_targets(t, PRESUSPEND_UNDO);
}
void dm_table_postsuspend_targets(struct dm_table *t)
if (!t)
return;
- suspend_targets(t, 1);
+ suspend_targets(t, POSTSUSPEND);
}
int dm_table_resume_targets(struct dm_table *t)
}
int dm_thin_find_block(struct dm_thin_device *td, dm_block_t block,
- int can_block, struct dm_thin_lookup_result *result)
+ int can_issue_io, struct dm_thin_lookup_result *result)
{
- int r = -EINVAL;
- uint64_t block_time = 0;
+ int r;
__le64 value;
struct dm_pool_metadata *pmd = td->pmd;
dm_block_t keys[2] = { td->id, block };
struct dm_btree_info *info;
- if (can_block) {
- down_read(&pmd->root_lock);
- info = &pmd->info;
- } else if (down_read_trylock(&pmd->root_lock))
- info = &pmd->nb_info;
- else
- return -EWOULDBLOCK;
-
if (pmd->fail_io)
- goto out;
+ return -EINVAL;
- r = dm_btree_lookup(info, pmd->root, keys, &value);
- if (!r)
- block_time = le64_to_cpu(value);
+ down_read(&pmd->root_lock);
-out:
- up_read(&pmd->root_lock);
+ if (can_issue_io) {
+ info = &pmd->info;
+ } else
+ info = &pmd->nb_info;
+ r = dm_btree_lookup(info, pmd->root, keys, &value);
if (!r) {
+ uint64_t block_time = 0;
dm_block_t exception_block;
uint32_t exception_time;
+
+ block_time = le64_to_cpu(value);
unpack_block_time(block_time, &exception_block,
&exception_time);
result->block = exception_block;
result->shared = __snapshotted_since(td, exception_time);
}
+ up_read(&pmd->root_lock);
return r;
}
return needs_check;
}
+
+void dm_pool_issue_prefetches(struct dm_pool_metadata *pmd)
+{
+ dm_tm_issue_prefetches(pmd->tm);
+}
/*
* Returns:
- * -EWOULDBLOCK iff @can_block is set and would block.
+ * -EWOULDBLOCK iff @can_issue_io is set and would issue IO
* -ENODATA iff that mapping is not present.
* 0 success
*/
int dm_thin_find_block(struct dm_thin_device *td, dm_block_t block,
- int can_block, struct dm_thin_lookup_result *result);
+ int can_issue_io, struct dm_thin_lookup_result *result);
/*
* Obtain an unused block.
int dm_pool_metadata_set_needs_check(struct dm_pool_metadata *pmd);
bool dm_pool_metadata_needs_check(struct dm_pool_metadata *pmd);
+/*
+ * Issue any prefetches that may be useful.
+ */
+void dm_pool_issue_prefetches(struct dm_pool_metadata *pmd);
+
/*----------------------------------------------------------------*/
#endif
#include <linux/device-mapper.h>
#include <linux/dm-io.h>
#include <linux/dm-kcopyd.h>
+#include <linux/log2.h>
#include <linux/list.h>
#include <linux/rculist.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/slab.h>
+#include <linux/sort.h>
#include <linux/rbtree.h>
#define DM_MSG_PREFIX "thin"
*/
#define ENDIO_HOOK_POOL_SIZE 1024
#define MAPPING_POOL_SIZE 1024
-#define PRISON_CELLS 1024
#define COMMIT_PERIOD HZ
#define NO_SPACE_TIMEOUT_SECS 60
{
key->virtual = 0;
key->dev = dm_thin_dev_id(td);
- key->block = b;
+ key->block_begin = b;
+ key->block_end = b + 1ULL;
}
static void build_virtual_key(struct dm_thin_device *td, dm_block_t b,
{
key->virtual = 1;
key->dev = dm_thin_dev_id(td);
- key->block = b;
+ key->block_begin = b;
+ key->block_end = b + 1ULL;
+}
+
+/*----------------------------------------------------------------*/
+
+#define THROTTLE_THRESHOLD (1 * HZ)
+
+struct throttle {
+ struct rw_semaphore lock;
+ unsigned long threshold;
+ bool throttle_applied;
+};
+
+static void throttle_init(struct throttle *t)
+{
+ init_rwsem(&t->lock);
+ t->throttle_applied = false;
+}
+
+static void throttle_work_start(struct throttle *t)
+{
+ t->threshold = jiffies + THROTTLE_THRESHOLD;
+}
+
+static void throttle_work_update(struct throttle *t)
+{
+ if (!t->throttle_applied && jiffies > t->threshold) {
+ down_write(&t->lock);
+ t->throttle_applied = true;
+ }
+}
+
+static void throttle_work_complete(struct throttle *t)
+{
+ if (t->throttle_applied) {
+ t->throttle_applied = false;
+ up_write(&t->lock);
+ }
+}
+
+static void throttle_lock(struct throttle *t)
+{
+ down_read(&t->lock);
+}
+
+static void throttle_unlock(struct throttle *t)
+{
+ up_read(&t->lock);
}
/*----------------------------------------------------------------*/
struct thin_c;
typedef void (*process_bio_fn)(struct thin_c *tc, struct bio *bio);
+typedef void (*process_cell_fn)(struct thin_c *tc, struct dm_bio_prison_cell *cell);
typedef void (*process_mapping_fn)(struct dm_thin_new_mapping *m);
+#define CELL_SORT_ARRAY_SIZE 8192
+
struct pool {
struct list_head list;
struct dm_target *ti; /* Only set if a pool target is bound */
struct pool_features pf;
bool low_water_triggered:1; /* A dm event has been sent */
+ bool suspended:1;
struct dm_bio_prison *prison;
struct dm_kcopyd_client *copier;
struct workqueue_struct *wq;
+ struct throttle throttle;
struct work_struct worker;
struct delayed_work waker;
struct delayed_work no_space_timeout;
process_bio_fn process_bio;
process_bio_fn process_discard;
+ process_cell_fn process_cell;
+ process_cell_fn process_discard_cell;
+
process_mapping_fn process_prepared_mapping;
process_mapping_fn process_prepared_discard;
+
+ struct dm_bio_prison_cell *cell_sort_array[CELL_SORT_ARRAY_SIZE];
};
static enum pool_mode get_pool_mode(struct pool *pool);
struct pool *pool;
struct dm_thin_device *td;
+ struct mapped_device *thin_md;
+
bool requeue_mode:1;
spinlock_t lock;
+ struct list_head deferred_cells;
struct bio_list deferred_bio_list;
struct bio_list retry_on_resume_list;
struct rb_root sort_bio_list; /* sorted list of deferred bios */
dm_bio_prison_free_cell(pool->prison, cell);
}
+static void cell_visit_release(struct pool *pool,
+ void (*fn)(void *, struct dm_bio_prison_cell *),
+ void *context,
+ struct dm_bio_prison_cell *cell)
+{
+ dm_cell_visit_release(pool->prison, fn, context, cell);
+ dm_bio_prison_free_cell(pool->prison, cell);
+}
+
static void cell_release_no_holder(struct pool *pool,
struct dm_bio_prison_cell *cell,
struct bio_list *bios)
dm_bio_prison_free_cell(pool->prison, cell);
}
-static void cell_defer_no_holder_no_free(struct thin_c *tc,
- struct dm_bio_prison_cell *cell)
-{
- struct pool *pool = tc->pool;
- unsigned long flags;
-
- spin_lock_irqsave(&tc->lock, flags);
- dm_cell_release_no_holder(pool->prison, cell, &tc->deferred_bio_list);
- spin_unlock_irqrestore(&tc->lock, flags);
-
- wake_worker(pool);
-}
-
static void cell_error_with_code(struct pool *pool,
struct dm_bio_prison_cell *cell, int error_code)
{
cell_error_with_code(pool, cell, -EIO);
}
+static void cell_success(struct pool *pool, struct dm_bio_prison_cell *cell)
+{
+ cell_error_with_code(pool, cell, 0);
+}
+
+static void cell_requeue(struct pool *pool, struct dm_bio_prison_cell *cell)
+{
+ cell_error_with_code(pool, cell, DM_ENDIO_REQUEUE);
+}
+
/*----------------------------------------------------------------*/
/*
struct rb_node rb_node;
};
-static void requeue_bio_list(struct thin_c *tc, struct bio_list *master)
+static void __merge_bio_list(struct bio_list *bios, struct bio_list *master)
+{
+ bio_list_merge(bios, master);
+ bio_list_init(master);
+}
+
+static void error_bio_list(struct bio_list *bios, int error)
{
struct bio *bio;
+
+ while ((bio = bio_list_pop(bios)))
+ bio_endio(bio, error);
+}
+
+static void error_thin_bio_list(struct thin_c *tc, struct bio_list *master, int error)
+{
struct bio_list bios;
unsigned long flags;
bio_list_init(&bios);
spin_lock_irqsave(&tc->lock, flags);
- bio_list_merge(&bios, master);
- bio_list_init(master);
+ __merge_bio_list(&bios, master);
spin_unlock_irqrestore(&tc->lock, flags);
- while ((bio = bio_list_pop(&bios)))
- bio_endio(bio, DM_ENDIO_REQUEUE);
+ error_bio_list(&bios, error);
}
-static void requeue_io(struct thin_c *tc)
+static void requeue_deferred_cells(struct thin_c *tc)
{
- requeue_bio_list(tc, &tc->deferred_bio_list);
- requeue_bio_list(tc, &tc->retry_on_resume_list);
+ struct pool *pool = tc->pool;
+ unsigned long flags;
+ struct list_head cells;
+ struct dm_bio_prison_cell *cell, *tmp;
+
+ INIT_LIST_HEAD(&cells);
+
+ spin_lock_irqsave(&tc->lock, flags);
+ list_splice_init(&tc->deferred_cells, &cells);
+ spin_unlock_irqrestore(&tc->lock, flags);
+
+ list_for_each_entry_safe(cell, tmp, &cells, user_list)
+ cell_requeue(pool, cell);
}
-static void error_thin_retry_list(struct thin_c *tc)
+static void requeue_io(struct thin_c *tc)
{
- struct bio *bio;
- unsigned long flags;
struct bio_list bios;
+ unsigned long flags;
bio_list_init(&bios);
spin_lock_irqsave(&tc->lock, flags);
- bio_list_merge(&bios, &tc->retry_on_resume_list);
- bio_list_init(&tc->retry_on_resume_list);
+ __merge_bio_list(&bios, &tc->deferred_bio_list);
+ __merge_bio_list(&bios, &tc->retry_on_resume_list);
spin_unlock_irqrestore(&tc->lock, flags);
- while ((bio = bio_list_pop(&bios)))
- bio_io_error(bio);
+ error_bio_list(&bios, DM_ENDIO_REQUEUE);
+ requeue_deferred_cells(tc);
}
static void error_retry_list(struct pool *pool)
rcu_read_lock();
list_for_each_entry_rcu(tc, &pool->active_thins, list)
- error_thin_retry_list(tc);
+ error_thin_bio_list(tc, &tc->retry_on_resume_list, -EIO);
rcu_read_unlock();
}
*/
/*
- * This sends the bios in the cell back to the deferred_bios list.
+ * This sends the bios in the cell, except the original holder, back
+ * to the deferred_bios list.
*/
-static void cell_defer(struct thin_c *tc, struct dm_bio_prison_cell *cell)
+static void cell_defer_no_holder(struct thin_c *tc, struct dm_bio_prison_cell *cell)
{
struct pool *pool = tc->pool;
unsigned long flags;
spin_lock_irqsave(&tc->lock, flags);
- cell_release(pool, cell, &tc->deferred_bio_list);
+ cell_release_no_holder(pool, cell, &tc->deferred_bio_list);
spin_unlock_irqrestore(&tc->lock, flags);
wake_worker(pool);
}
-/*
- * Same as cell_defer above, except it omits the original holder of the cell.
- */
-static void cell_defer_no_holder(struct thin_c *tc, struct dm_bio_prison_cell *cell)
+static void thin_defer_bio(struct thin_c *tc, struct bio *bio);
+
+struct remap_info {
+ struct thin_c *tc;
+ struct bio_list defer_bios;
+ struct bio_list issue_bios;
+};
+
+static void __inc_remap_and_issue_cell(void *context,
+ struct dm_bio_prison_cell *cell)
{
- struct pool *pool = tc->pool;
- unsigned long flags;
+ struct remap_info *info = context;
+ struct bio *bio;
- spin_lock_irqsave(&tc->lock, flags);
- cell_release_no_holder(pool, cell, &tc->deferred_bio_list);
- spin_unlock_irqrestore(&tc->lock, flags);
+ while ((bio = bio_list_pop(&cell->bios))) {
+ if (bio->bi_rw & (REQ_DISCARD | REQ_FLUSH | REQ_FUA))
+ bio_list_add(&info->defer_bios, bio);
+ else {
+ inc_all_io_entry(info->tc->pool, bio);
- wake_worker(pool);
+ /*
+ * We can't issue the bios with the bio prison lock
+ * held, so we add them to a list to issue on
+ * return from this function.
+ */
+ bio_list_add(&info->issue_bios, bio);
+ }
+ }
+}
+
+static void inc_remap_and_issue_cell(struct thin_c *tc,
+ struct dm_bio_prison_cell *cell,
+ dm_block_t block)
+{
+ struct bio *bio;
+ struct remap_info info;
+
+ info.tc = tc;
+ bio_list_init(&info.defer_bios);
+ bio_list_init(&info.issue_bios);
+
+ /*
+ * We have to be careful to inc any bios we're about to issue
+ * before the cell is released, and avoid a race with new bios
+ * being added to the cell.
+ */
+ cell_visit_release(tc->pool, __inc_remap_and_issue_cell,
+ &info, cell);
+
+ while ((bio = bio_list_pop(&info.defer_bios)))
+ thin_defer_bio(tc, bio);
+
+ while ((bio = bio_list_pop(&info.issue_bios)))
+ remap_and_issue(info.tc, bio, block);
}
static void process_prepared_mapping_fail(struct dm_thin_new_mapping *m)
* the bios in the cell.
*/
if (bio) {
- cell_defer_no_holder(tc, m->cell);
+ inc_remap_and_issue_cell(tc, m->cell, m->data_block);
bio_endio(bio, 0);
- } else
- cell_defer(tc, m->cell);
+ } else {
+ inc_all_io_entry(tc->pool, m->cell->holder);
+ remap_and_issue(tc, m->cell->holder, m->data_block);
+ inc_remap_and_issue_cell(tc, m->cell, m->data_block);
+ }
out:
list_del(&m->list);
}
}
+static void remap_and_issue_overwrite(struct thin_c *tc, struct bio *bio,
+ dm_block_t data_block,
+ struct dm_thin_new_mapping *m)
+{
+ struct pool *pool = tc->pool;
+ struct dm_thin_endio_hook *h = dm_per_bio_data(bio, sizeof(struct dm_thin_endio_hook));
+
+ h->overwrite_mapping = m;
+ m->bio = bio;
+ save_and_set_endio(bio, &m->saved_bi_end_io, overwrite_endio);
+ inc_all_io_entry(pool, bio);
+ remap_and_issue(tc, bio, data_block);
+}
+
/*
* A partial copy also needs to zero the uncopied region.
*/
* If the whole block of data is being overwritten, we can issue the
* bio immediately. Otherwise we use kcopyd to clone the data first.
*/
- if (io_overwrites_block(pool, bio)) {
- struct dm_thin_endio_hook *h = dm_per_bio_data(bio, sizeof(struct dm_thin_endio_hook));
-
- h->overwrite_mapping = m;
- m->bio = bio;
- save_and_set_endio(bio, &m->saved_bi_end_io, overwrite_endio);
- inc_all_io_entry(pool, bio);
- remap_and_issue(tc, bio, data_dest);
- } else {
+ if (io_overwrites_block(pool, bio))
+ remap_and_issue_overwrite(tc, bio, data_dest, m);
+ else {
struct dm_io_region from, to;
from.bdev = origin->bdev;
if (!pool->pf.zero_new_blocks)
process_prepared_mapping(m);
- else if (io_overwrites_block(pool, bio)) {
- struct dm_thin_endio_hook *h = dm_per_bio_data(bio, sizeof(struct dm_thin_endio_hook));
-
- h->overwrite_mapping = m;
- m->bio = bio;
- save_and_set_endio(bio, &m->saved_bi_end_io, overwrite_endio);
- inc_all_io_entry(pool, bio);
- remap_and_issue(tc, bio, data_block);
+ else if (io_overwrites_block(pool, bio))
+ remap_and_issue_overwrite(tc, bio, data_block, m);
- } else
+ else
ll_zero(tc, m,
data_block * pool->sectors_per_block,
(data_block + 1) * pool->sectors_per_block);
bio_list_init(&bios);
cell_release(pool, cell, &bios);
- error = should_error_unserviceable_bio(pool);
- if (error)
- while ((bio = bio_list_pop(&bios)))
- bio_endio(bio, error);
- else
- while ((bio = bio_list_pop(&bios)))
- retry_on_resume(bio);
+ while ((bio = bio_list_pop(&bios)))
+ retry_on_resume(bio);
}
-static void process_discard(struct thin_c *tc, struct bio *bio)
+static void process_discard_cell(struct thin_c *tc, struct dm_bio_prison_cell *cell)
{
int r;
- unsigned long flags;
+ struct bio *bio = cell->holder;
struct pool *pool = tc->pool;
- struct dm_bio_prison_cell *cell, *cell2;
- struct dm_cell_key key, key2;
+ struct dm_bio_prison_cell *cell2;
+ struct dm_cell_key key2;
dm_block_t block = get_bio_block(tc, bio);
struct dm_thin_lookup_result lookup_result;
struct dm_thin_new_mapping *m;
- build_virtual_key(tc->td, block, &key);
- if (bio_detain(tc->pool, &key, bio, &cell))
+ if (tc->requeue_mode) {
+ cell_requeue(pool, cell);
return;
+ }
r = dm_thin_find_block(tc->td, block, 1, &lookup_result);
switch (r) {
m->cell2 = cell2;
m->bio = bio;
- if (!dm_deferred_set_add_work(pool->all_io_ds, &m->list)) {
- spin_lock_irqsave(&pool->lock, flags);
- list_add_tail(&m->list, &pool->prepared_discards);
- spin_unlock_irqrestore(&pool->lock, flags);
- wake_worker(pool);
- }
+ if (!dm_deferred_set_add_work(pool->all_io_ds, &m->list))
+ pool->process_prepared_discard(m);
+
} else {
inc_all_io_entry(pool, bio);
cell_defer_no_holder(tc, cell);
}
}
+static void process_discard_bio(struct thin_c *tc, struct bio *bio)
+{
+ struct dm_bio_prison_cell *cell;
+ struct dm_cell_key key;
+ dm_block_t block = get_bio_block(tc, bio);
+
+ build_virtual_key(tc->td, block, &key);
+ if (bio_detain(tc->pool, &key, bio, &cell))
+ return;
+
+ process_discard_cell(tc, cell);
+}
+
static void break_sharing(struct thin_c *tc, struct bio *bio, dm_block_t block,
struct dm_cell_key *key,
struct dm_thin_lookup_result *lookup_result,
}
}
+static void __remap_and_issue_shared_cell(void *context,
+ struct dm_bio_prison_cell *cell)
+{
+ struct remap_info *info = context;
+ struct bio *bio;
+
+ while ((bio = bio_list_pop(&cell->bios))) {
+ if ((bio_data_dir(bio) == WRITE) ||
+ (bio->bi_rw & (REQ_DISCARD | REQ_FLUSH | REQ_FUA)))
+ bio_list_add(&info->defer_bios, bio);
+ else {
+ struct dm_thin_endio_hook *h = dm_per_bio_data(bio, sizeof(struct dm_thin_endio_hook));;
+
+ h->shared_read_entry = dm_deferred_entry_inc(info->tc->pool->shared_read_ds);
+ inc_all_io_entry(info->tc->pool, bio);
+ bio_list_add(&info->issue_bios, bio);
+ }
+ }
+}
+
+static void remap_and_issue_shared_cell(struct thin_c *tc,
+ struct dm_bio_prison_cell *cell,
+ dm_block_t block)
+{
+ struct bio *bio;
+ struct remap_info info;
+
+ info.tc = tc;
+ bio_list_init(&info.defer_bios);
+ bio_list_init(&info.issue_bios);
+
+ cell_visit_release(tc->pool, __remap_and_issue_shared_cell,
+ &info, cell);
+
+ while ((bio = bio_list_pop(&info.defer_bios)))
+ thin_defer_bio(tc, bio);
+
+ while ((bio = bio_list_pop(&info.issue_bios)))
+ remap_and_issue(tc, bio, block);
+}
+
static void process_shared_bio(struct thin_c *tc, struct bio *bio,
dm_block_t block,
- struct dm_thin_lookup_result *lookup_result)
+ struct dm_thin_lookup_result *lookup_result,
+ struct dm_bio_prison_cell *virt_cell)
{
- struct dm_bio_prison_cell *cell;
+ struct dm_bio_prison_cell *data_cell;
struct pool *pool = tc->pool;
struct dm_cell_key key;
* of being broken so we have nothing further to do here.
*/
build_data_key(tc->td, lookup_result->block, &key);
- if (bio_detain(pool, &key, bio, &cell))
+ if (bio_detain(pool, &key, bio, &data_cell)) {
+ cell_defer_no_holder(tc, virt_cell);
return;
+ }
- if (bio_data_dir(bio) == WRITE && bio->bi_iter.bi_size)
- break_sharing(tc, bio, block, &key, lookup_result, cell);
- else {
+ if (bio_data_dir(bio) == WRITE && bio->bi_iter.bi_size) {
+ break_sharing(tc, bio, block, &key, lookup_result, data_cell);
+ cell_defer_no_holder(tc, virt_cell);
+ } else {
struct dm_thin_endio_hook *h = dm_per_bio_data(bio, sizeof(struct dm_thin_endio_hook));
h->shared_read_entry = dm_deferred_entry_inc(pool->shared_read_ds);
inc_all_io_entry(pool, bio);
- cell_defer_no_holder(tc, cell);
-
remap_and_issue(tc, bio, lookup_result->block);
+
+ remap_and_issue_shared_cell(tc, data_cell, lookup_result->block);
+ remap_and_issue_shared_cell(tc, virt_cell, lookup_result->block);
}
}
}
}
-static void process_bio(struct thin_c *tc, struct bio *bio)
+static void process_cell(struct thin_c *tc, struct dm_bio_prison_cell *cell)
{
int r;
struct pool *pool = tc->pool;
+ struct bio *bio = cell->holder;
dm_block_t block = get_bio_block(tc, bio);
- struct dm_bio_prison_cell *cell;
- struct dm_cell_key key;
struct dm_thin_lookup_result lookup_result;
- /*
- * If cell is already occupied, then the block is already
- * being provisioned so we have nothing further to do here.
- */
- build_virtual_key(tc->td, block, &key);
- if (bio_detain(pool, &key, bio, &cell))
+ if (tc->requeue_mode) {
+ cell_requeue(pool, cell);
return;
+ }
r = dm_thin_find_block(tc->td, block, 1, &lookup_result);
switch (r) {
case 0:
- if (lookup_result.shared) {
- process_shared_bio(tc, bio, block, &lookup_result);
- cell_defer_no_holder(tc, cell); /* FIXME: pass this cell into process_shared? */
- } else {
+ if (lookup_result.shared)
+ process_shared_bio(tc, bio, block, &lookup_result, cell);
+ else {
inc_all_io_entry(pool, bio);
- cell_defer_no_holder(tc, cell);
-
remap_and_issue(tc, bio, lookup_result.block);
+ inc_remap_and_issue_cell(tc, cell, lookup_result.block);
}
break;
}
}
-static void process_bio_read_only(struct thin_c *tc, struct bio *bio)
+static void process_bio(struct thin_c *tc, struct bio *bio)
+{
+ struct pool *pool = tc->pool;
+ dm_block_t block = get_bio_block(tc, bio);
+ struct dm_bio_prison_cell *cell;
+ struct dm_cell_key key;
+
+ /*
+ * If cell is already occupied, then the block is already
+ * being provisioned so we have nothing further to do here.
+ */
+ build_virtual_key(tc->td, block, &key);
+ if (bio_detain(pool, &key, bio, &cell))
+ return;
+
+ process_cell(tc, cell);
+}
+
+static void __process_bio_read_only(struct thin_c *tc, struct bio *bio,
+ struct dm_bio_prison_cell *cell)
{
int r;
int rw = bio_data_dir(bio);
r = dm_thin_find_block(tc->td, block, 1, &lookup_result);
switch (r) {
case 0:
- if (lookup_result.shared && (rw == WRITE) && bio->bi_iter.bi_size)
+ if (lookup_result.shared && (rw == WRITE) && bio->bi_iter.bi_size) {
handle_unserviceable_bio(tc->pool, bio);
- else {
+ if (cell)
+ cell_defer_no_holder(tc, cell);
+ } else {
inc_all_io_entry(tc->pool, bio);
remap_and_issue(tc, bio, lookup_result.block);
+ if (cell)
+ inc_remap_and_issue_cell(tc, cell, lookup_result.block);
}
break;
case -ENODATA:
+ if (cell)
+ cell_defer_no_holder(tc, cell);
if (rw != READ) {
handle_unserviceable_bio(tc->pool, bio);
break;
default:
DMERR_LIMIT("%s: dm_thin_find_block() failed: error = %d",
__func__, r);
+ if (cell)
+ cell_defer_no_holder(tc, cell);
bio_io_error(bio);
break;
}
}
+static void process_bio_read_only(struct thin_c *tc, struct bio *bio)
+{
+ __process_bio_read_only(tc, bio, NULL);
+}
+
+static void process_cell_read_only(struct thin_c *tc, struct dm_bio_prison_cell *cell)
+{
+ __process_bio_read_only(tc, cell->holder, cell);
+}
+
static void process_bio_success(struct thin_c *tc, struct bio *bio)
{
bio_endio(bio, 0);
bio_io_error(bio);
}
+static void process_cell_success(struct thin_c *tc, struct dm_bio_prison_cell *cell)
+{
+ cell_success(tc->pool, cell);
+}
+
+static void process_cell_fail(struct thin_c *tc, struct dm_bio_prison_cell *cell)
+{
+ cell_error(tc->pool, cell);
+}
+
/*
* FIXME: should we also commit due to size of transaction, measured in
* metadata blocks?
struct bio *bio;
struct bio_list bios;
struct blk_plug plug;
+ unsigned count = 0;
if (tc->requeue_mode) {
- requeue_bio_list(tc, &tc->deferred_bio_list);
+ error_thin_bio_list(tc, &tc->deferred_bio_list, DM_ENDIO_REQUEUE);
return;
}
pool->process_discard(tc, bio);
else
pool->process_bio(tc, bio);
+
+ if ((count++ & 127) == 0) {
+ throttle_work_update(&pool->throttle);
+ dm_pool_issue_prefetches(pool->pmd);
+ }
}
blk_finish_plug(&plug);
}
+static int cmp_cells(const void *lhs, const void *rhs)
+{
+ struct dm_bio_prison_cell *lhs_cell = *((struct dm_bio_prison_cell **) lhs);
+ struct dm_bio_prison_cell *rhs_cell = *((struct dm_bio_prison_cell **) rhs);
+
+ BUG_ON(!lhs_cell->holder);
+ BUG_ON(!rhs_cell->holder);
+
+ if (lhs_cell->holder->bi_iter.bi_sector < rhs_cell->holder->bi_iter.bi_sector)
+ return -1;
+
+ if (lhs_cell->holder->bi_iter.bi_sector > rhs_cell->holder->bi_iter.bi_sector)
+ return 1;
+
+ return 0;
+}
+
+static unsigned sort_cells(struct pool *pool, struct list_head *cells)
+{
+ unsigned count = 0;
+ struct dm_bio_prison_cell *cell, *tmp;
+
+ list_for_each_entry_safe(cell, tmp, cells, user_list) {
+ if (count >= CELL_SORT_ARRAY_SIZE)
+ break;
+
+ pool->cell_sort_array[count++] = cell;
+ list_del(&cell->user_list);
+ }
+
+ sort(pool->cell_sort_array, count, sizeof(cell), cmp_cells, NULL);
+
+ return count;
+}
+
+static void process_thin_deferred_cells(struct thin_c *tc)
+{
+ struct pool *pool = tc->pool;
+ unsigned long flags;
+ struct list_head cells;
+ struct dm_bio_prison_cell *cell;
+ unsigned i, j, count;
+
+ INIT_LIST_HEAD(&cells);
+
+ spin_lock_irqsave(&tc->lock, flags);
+ list_splice_init(&tc->deferred_cells, &cells);
+ spin_unlock_irqrestore(&tc->lock, flags);
+
+ if (list_empty(&cells))
+ return;
+
+ do {
+ count = sort_cells(tc->pool, &cells);
+
+ for (i = 0; i < count; i++) {
+ cell = pool->cell_sort_array[i];
+ BUG_ON(!cell->holder);
+
+ /*
+ * If we've got no free new_mapping structs, and processing
+ * this bio might require one, we pause until there are some
+ * prepared mappings to process.
+ */
+ if (ensure_next_mapping(pool)) {
+ for (j = i; j < count; j++)
+ list_add(&pool->cell_sort_array[j]->user_list, &cells);
+
+ spin_lock_irqsave(&tc->lock, flags);
+ list_splice(&cells, &tc->deferred_cells);
+ spin_unlock_irqrestore(&tc->lock, flags);
+ return;
+ }
+
+ if (cell->holder->bi_rw & REQ_DISCARD)
+ pool->process_discard_cell(tc, cell);
+ else
+ pool->process_cell(tc, cell);
+ }
+ } while (!list_empty(&cells));
+}
+
static void thin_get(struct thin_c *tc);
static void thin_put(struct thin_c *tc);
tc = get_first_thin(pool);
while (tc) {
+ process_thin_deferred_cells(tc);
process_thin_deferred_bios(tc);
tc = get_next_thin(pool, tc);
}
{
struct pool *pool = container_of(ws, struct pool, worker);
+ throttle_work_start(&pool->throttle);
+ dm_pool_issue_prefetches(pool->pmd);
+ throttle_work_update(&pool->throttle);
process_prepared(pool, &pool->prepared_mappings, &pool->process_prepared_mapping);
+ throttle_work_update(&pool->throttle);
process_prepared(pool, &pool->prepared_discards, &pool->process_prepared_discard);
+ throttle_work_update(&pool->throttle);
process_deferred_bios(pool);
+ throttle_work_complete(&pool->throttle);
}
/*
dm_pool_metadata_read_only(pool->pmd);
pool->process_bio = process_bio_fail;
pool->process_discard = process_bio_fail;
+ pool->process_cell = process_cell_fail;
+ pool->process_discard_cell = process_cell_fail;
pool->process_prepared_mapping = process_prepared_mapping_fail;
pool->process_prepared_discard = process_prepared_discard_fail;
dm_pool_metadata_read_only(pool->pmd);
pool->process_bio = process_bio_read_only;
pool->process_discard = process_bio_success;
+ pool->process_cell = process_cell_read_only;
+ pool->process_discard_cell = process_cell_success;
pool->process_prepared_mapping = process_prepared_mapping_fail;
pool->process_prepared_discard = process_prepared_discard_passdown;
if (old_mode != new_mode)
notify_of_pool_mode_change(pool, "out-of-data-space");
pool->process_bio = process_bio_read_only;
- pool->process_discard = process_discard;
+ pool->process_discard = process_discard_bio;
+ pool->process_cell = process_cell_read_only;
+ pool->process_discard_cell = process_discard_cell;
pool->process_prepared_mapping = process_prepared_mapping;
pool->process_prepared_discard = process_prepared_discard_passdown;
notify_of_pool_mode_change(pool, "write");
dm_pool_metadata_read_write(pool->pmd);
pool->process_bio = process_bio;
- pool->process_discard = process_discard;
+ pool->process_discard = process_discard_bio;
+ pool->process_cell = process_cell;
+ pool->process_discard_cell = process_discard_cell;
pool->process_prepared_mapping = process_prepared_mapping;
pool->process_prepared_discard = process_prepared_discard;
break;
wake_worker(pool);
}
+static void thin_defer_bio_with_throttle(struct thin_c *tc, struct bio *bio)
+{
+ struct pool *pool = tc->pool;
+
+ throttle_lock(&pool->throttle);
+ thin_defer_bio(tc, bio);
+ throttle_unlock(&pool->throttle);
+}
+
+static void thin_defer_cell(struct thin_c *tc, struct dm_bio_prison_cell *cell)
+{
+ unsigned long flags;
+ struct pool *pool = tc->pool;
+
+ throttle_lock(&pool->throttle);
+ spin_lock_irqsave(&tc->lock, flags);
+ list_add_tail(&cell->user_list, &tc->deferred_cells);
+ spin_unlock_irqrestore(&tc->lock, flags);
+ throttle_unlock(&pool->throttle);
+
+ wake_worker(pool);
+}
+
static void thin_hook_bio(struct thin_c *tc, struct bio *bio)
{
struct dm_thin_endio_hook *h = dm_per_bio_data(bio, sizeof(struct dm_thin_endio_hook));
dm_block_t block = get_bio_block(tc, bio);
struct dm_thin_device *td = tc->td;
struct dm_thin_lookup_result result;
- struct dm_bio_prison_cell cell1, cell2;
- struct dm_bio_prison_cell *cell_result;
+ struct dm_bio_prison_cell *virt_cell, *data_cell;
struct dm_cell_key key;
thin_hook_bio(tc, bio);
}
if (bio->bi_rw & (REQ_DISCARD | REQ_FLUSH | REQ_FUA)) {
- thin_defer_bio(tc, bio);
+ thin_defer_bio_with_throttle(tc, bio);
return DM_MAPIO_SUBMITTED;
}
+ /*
+ * We must hold the virtual cell before doing the lookup, otherwise
+ * there's a race with discard.
+ */
+ build_virtual_key(tc->td, block, &key);
+ if (bio_detain(tc->pool, &key, bio, &virt_cell))
+ return DM_MAPIO_SUBMITTED;
+
r = dm_thin_find_block(td, block, 0, &result);
/*
* More distant ancestors are irrelevant. The
* shared flag will be set in their case.
*/
- thin_defer_bio(tc, bio);
+ thin_defer_cell(tc, virt_cell);
return DM_MAPIO_SUBMITTED;
}
- build_virtual_key(tc->td, block, &key);
- if (dm_bio_detain(tc->pool->prison, &key, bio, &cell1, &cell_result))
- return DM_MAPIO_SUBMITTED;
-
build_data_key(tc->td, result.block, &key);
- if (dm_bio_detain(tc->pool->prison, &key, bio, &cell2, &cell_result)) {
- cell_defer_no_holder_no_free(tc, &cell1);
+ if (bio_detain(tc->pool, &key, bio, &data_cell)) {
+ cell_defer_no_holder(tc, virt_cell);
return DM_MAPIO_SUBMITTED;
}
inc_all_io_entry(tc->pool, bio);
- cell_defer_no_holder_no_free(tc, &cell2);
- cell_defer_no_holder_no_free(tc, &cell1);
+ cell_defer_no_holder(tc, data_cell);
+ cell_defer_no_holder(tc, virt_cell);
remap(tc, bio, result.block);
return DM_MAPIO_REMAPPED;
* of doing so.
*/
handle_unserviceable_bio(tc->pool, bio);
+ cell_defer_no_holder(tc, virt_cell);
return DM_MAPIO_SUBMITTED;
}
/* fall through */
case -EWOULDBLOCK:
- /*
- * In future, the failed dm_thin_find_block above could
- * provide the hint to load the metadata into cache.
- */
- thin_defer_bio(tc, bio);
+ thin_defer_cell(tc, virt_cell);
return DM_MAPIO_SUBMITTED;
default:
* pool is switched to fail-io mode.
*/
bio_io_error(bio);
+ cell_defer_no_holder(tc, virt_cell);
return DM_MAPIO_SUBMITTED;
}
}
pool->sectors_per_block_shift = __ffs(block_size);
pool->low_water_blocks = 0;
pool_features_init(&pool->pf);
- pool->prison = dm_bio_prison_create(PRISON_CELLS);
+ pool->prison = dm_bio_prison_create();
if (!pool->prison) {
*error = "Error creating pool's bio prison";
err_p = ERR_PTR(-ENOMEM);
goto bad_wq;
}
+ throttle_init(&pool->throttle);
INIT_WORK(&pool->worker, do_worker);
INIT_DELAYED_WORK(&pool->waker, do_waker);
INIT_DELAYED_WORK(&pool->no_space_timeout, do_no_space_timeout);
INIT_LIST_HEAD(&pool->prepared_discards);
INIT_LIST_HEAD(&pool->active_thins);
pool->low_water_triggered = false;
+ pool->suspended = true;
pool->shared_read_ds = dm_deferred_set_create();
if (!pool->shared_read_ds) {
return 0;
}
+static void pool_suspend_active_thins(struct pool *pool)
+{
+ struct thin_c *tc;
+
+ /* Suspend all active thin devices */
+ tc = get_first_thin(pool);
+ while (tc) {
+ dm_internal_suspend_noflush(tc->thin_md);
+ tc = get_next_thin(pool, tc);
+ }
+}
+
+static void pool_resume_active_thins(struct pool *pool)
+{
+ struct thin_c *tc;
+
+ /* Resume all active thin devices */
+ tc = get_first_thin(pool);
+ while (tc) {
+ dm_internal_resume(tc->thin_md);
+ tc = get_next_thin(pool, tc);
+ }
+}
+
static void pool_resume(struct dm_target *ti)
{
struct pool_c *pt = ti->private;
struct pool *pool = pt->pool;
unsigned long flags;
+ /*
+ * Must requeue active_thins' bios and then resume
+ * active_thins _before_ clearing 'suspend' flag.
+ */
+ requeue_bios(pool);
+ pool_resume_active_thins(pool);
+
spin_lock_irqsave(&pool->lock, flags);
pool->low_water_triggered = false;
+ pool->suspended = false;
spin_unlock_irqrestore(&pool->lock, flags);
- requeue_bios(pool);
do_waker(&pool->waker.work);
}
+static void pool_presuspend(struct dm_target *ti)
+{
+ struct pool_c *pt = ti->private;
+ struct pool *pool = pt->pool;
+ unsigned long flags;
+
+ spin_lock_irqsave(&pool->lock, flags);
+ pool->suspended = true;
+ spin_unlock_irqrestore(&pool->lock, flags);
+
+ pool_suspend_active_thins(pool);
+}
+
+static void pool_presuspend_undo(struct dm_target *ti)
+{
+ struct pool_c *pt = ti->private;
+ struct pool *pool = pt->pool;
+ unsigned long flags;
+
+ pool_resume_active_thins(pool);
+
+ spin_lock_irqsave(&pool->lock, flags);
+ pool->suspended = false;
+ spin_unlock_irqrestore(&pool->lock, flags);
+}
+
static void pool_postsuspend(struct dm_target *ti)
{
struct pool_c *pt = ti->private;
* create_thin <dev_id>
* create_snap <dev_id> <origin_id>
* delete <dev_id>
- * trim <dev_id> <new_size_in_sectors>
* set_transaction_id <current_trans_id> <new_trans_id>
* reserve_metadata_snap
* release_metadata_snap
{
struct pool_c *pt = ti->private;
struct pool *pool = pt->pool;
- uint64_t io_opt_sectors = limits->io_opt >> SECTOR_SHIFT;
+ sector_t io_opt_sectors = limits->io_opt >> SECTOR_SHIFT;
+
+ /*
+ * If max_sectors is smaller than pool->sectors_per_block adjust it
+ * to the highest possible power-of-2 factor of pool->sectors_per_block.
+ * This is especially beneficial when the pool's data device is a RAID
+ * device that has a full stripe width that matches pool->sectors_per_block
+ * -- because even though partial RAID stripe-sized IOs will be issued to a
+ * single RAID stripe; when aggregated they will end on a full RAID stripe
+ * boundary.. which avoids additional partial RAID stripe writes cascading
+ */
+ if (limits->max_sectors < pool->sectors_per_block) {
+ while (!is_factor(pool->sectors_per_block, limits->max_sectors)) {
+ if ((limits->max_sectors & (limits->max_sectors - 1)) == 0)
+ limits->max_sectors--;
+ limits->max_sectors = rounddown_pow_of_two(limits->max_sectors);
+ }
+ }
/*
* If the system-determined stacked limits are compatible with the
* pool's blocksize (io_opt is a factor) do not override them.
*/
if (io_opt_sectors < pool->sectors_per_block ||
- do_div(io_opt_sectors, pool->sectors_per_block)) {
- blk_limits_io_min(limits, pool->sectors_per_block << SECTOR_SHIFT);
+ !is_factor(io_opt_sectors, pool->sectors_per_block)) {
+ if (is_factor(pool->sectors_per_block, limits->max_sectors))
+ blk_limits_io_min(limits, limits->max_sectors << SECTOR_SHIFT);
+ else
+ blk_limits_io_min(limits, pool->sectors_per_block << SECTOR_SHIFT);
blk_limits_io_opt(limits, pool->sectors_per_block << SECTOR_SHIFT);
}
.name = "thin-pool",
.features = DM_TARGET_SINGLETON | DM_TARGET_ALWAYS_WRITEABLE |
DM_TARGET_IMMUTABLE,
- .version = {1, 13, 0},
+ .version = {1, 14, 0},
.module = THIS_MODULE,
.ctr = pool_ctr,
.dtr = pool_dtr,
.map = pool_map,
+ .presuspend = pool_presuspend,
+ .presuspend_undo = pool_presuspend_undo,
.postsuspend = pool_postsuspend,
.preresume = pool_preresume,
.resume = pool_resume,
struct thin_c *tc = ti->private;
unsigned long flags;
- thin_put(tc);
- wait_for_completion(&tc->can_destroy);
-
spin_lock_irqsave(&tc->pool->lock, flags);
list_del_rcu(&tc->list);
spin_unlock_irqrestore(&tc->pool->lock, flags);
synchronize_rcu();
+ thin_put(tc);
+ wait_for_completion(&tc->can_destroy);
+
mutex_lock(&dm_thin_pool_table.mutex);
__pool_dec(tc->pool);
r = -ENOMEM;
goto out_unlock;
}
+ tc->thin_md = dm_table_get_md(ti->table);
spin_lock_init(&tc->lock);
+ INIT_LIST_HEAD(&tc->deferred_cells);
bio_list_init(&tc->deferred_bio_list);
bio_list_init(&tc->retry_on_resume_list);
tc->sort_bio_list = RB_ROOT;
if (get_pool_mode(tc->pool) == PM_FAIL) {
ti->error = "Couldn't open thin device, Pool is in fail mode";
r = -EINVAL;
- goto bad_thin_open;
+ goto bad_pool;
}
r = dm_pool_open_thin_device(tc->pool->pmd, tc->dev_id, &tc->td);
if (r) {
ti->error = "Couldn't open thin internal device";
- goto bad_thin_open;
+ goto bad_pool;
}
r = dm_set_target_max_io_len(ti, tc->pool->sectors_per_block);
if (r)
- goto bad_target_max_io_len;
+ goto bad;
ti->num_flush_bios = 1;
ti->flush_supported = true;
ti->split_discard_bios = true;
}
- dm_put(pool_md);
-
mutex_unlock(&dm_thin_pool_table.mutex);
- atomic_set(&tc->refcount, 1);
- init_completion(&tc->can_destroy);
-
spin_lock_irqsave(&tc->pool->lock, flags);
+ if (tc->pool->suspended) {
+ spin_unlock_irqrestore(&tc->pool->lock, flags);
+ mutex_lock(&dm_thin_pool_table.mutex); /* reacquire for __pool_dec */
+ ti->error = "Unable to activate thin device while pool is suspended";
+ r = -EINVAL;
+ goto bad;
+ }
list_add_tail_rcu(&tc->list, &tc->pool->active_thins);
spin_unlock_irqrestore(&tc->pool->lock, flags);
/*
*/
synchronize_rcu();
+ dm_put(pool_md);
+
+ atomic_set(&tc->refcount, 1);
+ init_completion(&tc->can_destroy);
+
return 0;
-bad_target_max_io_len:
+bad:
dm_pool_close_thin_device(tc->td);
-bad_thin_open:
+bad_pool:
__pool_dec(tc->pool);
bad_pool_lookup:
dm_put(pool_md);
DMEMIT("Error");
}
+static int thin_merge(struct dm_target *ti, struct bvec_merge_data *bvm,
+ struct bio_vec *biovec, int max_size)
+{
+ struct thin_c *tc = ti->private;
+ struct request_queue *q = bdev_get_queue(tc->pool_dev->bdev);
+
+ if (!q->merge_bvec_fn)
+ return max_size;
+
+ bvm->bi_bdev = tc->pool_dev->bdev;
+ bvm->bi_sector = dm_target_offset(ti, bvm->bi_sector);
+
+ return min(max_size, q->merge_bvec_fn(q, bvm, biovec));
+}
+
static int thin_iterate_devices(struct dm_target *ti,
iterate_devices_callout_fn fn, void *data)
{
static struct target_type thin_target = {
.name = "thin",
- .version = {1, 13, 0},
+ .version = {1, 14, 0},
.module = THIS_MODULE,
.ctr = thin_ctr,
.dtr = thin_dtr,
.presuspend = thin_presuspend,
.postsuspend = thin_postsuspend,
.status = thin_status,
+ .merge = thin_merge,
.iterate_devices = thin_iterate_devices,
};
#include <linux/idr.h>
#include <linux/hdreg.h>
#include <linux/delay.h>
+#include <linux/wait.h>
#include <trace/events/block.h>
#define DMF_NOFLUSH_SUSPENDING 5
#define DMF_MERGE_IS_OPTIONAL 6
#define DMF_DEFERRED_REMOVE 7
+#define DMF_SUSPENDED_INTERNALLY 8
/*
* A dummy definition to make RCU happy.
* Use dm_get_live_table{_fast} or take suspend_lock for
* dereference.
*/
- struct dm_table *map;
+ struct dm_table __rcu *map;
struct list_head table_devices;
struct mutex table_devices_lock;
goto out;
tgt = dm_table_get_target(map, 0);
+ if (!tgt->type->ioctl)
+ goto out;
if (dm_suspended_md(md)) {
r = -EAGAIN;
goto out;
}
- if (tgt->type->ioctl)
- r = tgt->type->ioctl(tgt, cmd, arg);
+ r = tgt->type->ioctl(tgt, cmd, arg);
out:
dm_put_live_table(md, srcu_idx);
* Find maximum amount of I/O that won't need splitting
*/
max_sectors = min(max_io_len(bvm->bi_sector, ti),
- (sector_t) BIO_MAX_SECTORS);
+ (sector_t) queue_max_sectors(q));
max_size = (max_sectors << SECTOR_SHIFT) - bvm->bi_size;
- if (max_size < 0)
+ if (unlikely(max_size < 0)) /* this shouldn't _ever_ happen */
max_size = 0;
/*
max_size = ti->type->merge(ti, bvm, biovec, max_size);
/*
* If the target doesn't support merge method and some of the devices
- * provided their merge_bvec method (we know this by looking at
- * queue_max_hw_sectors), then we can't allow bios with multiple vector
- * entries. So always set max_size to 0, and the code below allows
- * just one page.
+ * provided their merge_bvec method (we know this by looking for the
+ * max_hw_sectors that dm_set_device_limits may set), then we can't
+ * allow bios with multiple vector entries. So always set max_size
+ * to 0, and the code below allows just one page.
*/
else if (queue_max_hw_sectors(q) <= PAGE_SIZE >> 9)
max_size = 0;
merge_is_optional = dm_table_merge_is_optional(t);
- old_map = md->map;
+ old_map = rcu_dereference_protected(md->map, lockdep_is_held(&md->suspend_lock));
rcu_assign_pointer(md->map, t);
md->immutable_target_type = dm_table_get_immutable_target_type(t);
set_bit(DMF_MERGE_IS_OPTIONAL, &md->flags);
else
clear_bit(DMF_MERGE_IS_OPTIONAL, &md->flags);
- dm_sync_table(md);
+ if (old_map)
+ dm_sync_table(md);
return old_map;
}
*/
static struct dm_table *__unbind(struct mapped_device *md)
{
- struct dm_table *map = md->map;
+ struct dm_table *map = rcu_dereference_protected(md->map, 1);
if (!map)
return NULL;
}
/*
- * We need to be able to change a mapping table under a mounted
- * filesystem. For example we might want to move some data in
- * the background. Before the table can be swapped with
- * dm_bind_table, dm_suspend must be called to flush any in
- * flight bios and ensure that any further io gets deferred.
- */
-/*
- * Suspend mechanism in request-based dm.
+ * If __dm_suspend returns 0, the device is completely quiescent
+ * now. There is no request-processing activity. All new requests
+ * are being added to md->deferred list.
*
- * 1. Flush all I/Os by lock_fs() if needed.
- * 2. Stop dispatching any I/O by stopping the request_queue.
- * 3. Wait for all in-flight I/Os to be completed or requeued.
- *
- * To abort suspend, start the request_queue.
+ * Caller must hold md->suspend_lock
*/
-int dm_suspend(struct mapped_device *md, unsigned suspend_flags)
+static int __dm_suspend(struct mapped_device *md, struct dm_table *map,
+ unsigned suspend_flags, int interruptible)
{
- struct dm_table *map = NULL;
- int r = 0;
- int do_lockfs = suspend_flags & DM_SUSPEND_LOCKFS_FLAG ? 1 : 0;
- int noflush = suspend_flags & DM_SUSPEND_NOFLUSH_FLAG ? 1 : 0;
-
- mutex_lock(&md->suspend_lock);
-
- if (dm_suspended_md(md)) {
- r = -EINVAL;
- goto out_unlock;
- }
-
- map = md->map;
+ bool do_lockfs = suspend_flags & DM_SUSPEND_LOCKFS_FLAG;
+ bool noflush = suspend_flags & DM_SUSPEND_NOFLUSH_FLAG;
+ int r;
/*
* DMF_NOFLUSH_SUSPENDING must be set before presuspend.
if (noflush)
set_bit(DMF_NOFLUSH_SUSPENDING, &md->flags);
- /* This does not get reverted if there's an error later. */
+ /*
+ * This gets reverted if there's an error later and the targets
+ * provide the .presuspend_undo hook.
+ */
dm_table_presuspend_targets(map);
/*
*/
if (!noflush && do_lockfs) {
r = lock_fs(md);
- if (r)
- goto out_unlock;
+ if (r) {
+ dm_table_presuspend_undo_targets(map);
+ return r;
+ }
}
/*
* flush_workqueue(md->wq).
*/
set_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags);
- synchronize_srcu(&md->io_barrier);
+ if (map)
+ synchronize_srcu(&md->io_barrier);
/*
* Stop md->queue before flushing md->wq in case request-based
* We call dm_wait_for_completion to wait for all existing requests
* to finish.
*/
- r = dm_wait_for_completion(md, TASK_INTERRUPTIBLE);
+ r = dm_wait_for_completion(md, interruptible);
if (noflush)
clear_bit(DMF_NOFLUSH_SUSPENDING, &md->flags);
- synchronize_srcu(&md->io_barrier);
+ if (map)
+ synchronize_srcu(&md->io_barrier);
/* were we interrupted ? */
if (r < 0) {
start_queue(md->queue);
unlock_fs(md);
- goto out_unlock; /* pushback list is already flushed, so skip flush */
+ dm_table_presuspend_undo_targets(map);
+ /* pushback list is already flushed, so skip flush */
}
- /*
- * If dm_wait_for_completion returned 0, the device is completely
- * quiescent now. There is no request-processing activity. All new
- * requests are being added to md->deferred list.
- */
+ return r;
+}
+
+/*
+ * We need to be able to change a mapping table under a mounted
+ * filesystem. For example we might want to move some data in
+ * the background. Before the table can be swapped with
+ * dm_bind_table, dm_suspend must be called to flush any in
+ * flight bios and ensure that any further io gets deferred.
+ */
+/*
+ * Suspend mechanism in request-based dm.
+ *
+ * 1. Flush all I/Os by lock_fs() if needed.
+ * 2. Stop dispatching any I/O by stopping the request_queue.
+ * 3. Wait for all in-flight I/Os to be completed or requeued.
+ *
+ * To abort suspend, start the request_queue.
+ */
+int dm_suspend(struct mapped_device *md, unsigned suspend_flags)
+{
+ struct dm_table *map = NULL;
+ int r = 0;
+
+retry:
+ mutex_lock_nested(&md->suspend_lock, SINGLE_DEPTH_NESTING);
+
+ if (dm_suspended_md(md)) {
+ r = -EINVAL;
+ goto out_unlock;
+ }
+
+ if (dm_suspended_internally_md(md)) {
+ /* already internally suspended, wait for internal resume */
+ mutex_unlock(&md->suspend_lock);
+ r = wait_on_bit(&md->flags, DMF_SUSPENDED_INTERNALLY, TASK_INTERRUPTIBLE);
+ if (r)
+ return r;
+ goto retry;
+ }
+
+ map = rcu_dereference_protected(md->map, lockdep_is_held(&md->suspend_lock));
+
+ r = __dm_suspend(md, map, suspend_flags, TASK_INTERRUPTIBLE);
+ if (r)
+ goto out_unlock;
set_bit(DMF_SUSPENDED, &md->flags);
return r;
}
-int dm_resume(struct mapped_device *md)
+static int __dm_resume(struct mapped_device *md, struct dm_table *map)
{
- int r = -EINVAL;
- struct dm_table *map = NULL;
-
- mutex_lock(&md->suspend_lock);
- if (!dm_suspended_md(md))
- goto out;
-
- map = md->map;
- if (!map || !dm_table_get_size(map))
- goto out;
-
- r = dm_table_resume_targets(map);
- if (r)
- goto out;
+ if (map) {
+ int r = dm_table_resume_targets(map);
+ if (r)
+ return r;
+ }
dm_queue_flush(md);
unlock_fs(md);
+ return 0;
+}
+
+int dm_resume(struct mapped_device *md)
+{
+ int r = -EINVAL;
+ struct dm_table *map = NULL;
+
+retry:
+ mutex_lock_nested(&md->suspend_lock, SINGLE_DEPTH_NESTING);
+
+ if (!dm_suspended_md(md))
+ goto out;
+
+ if (dm_suspended_internally_md(md)) {
+ /* already internally suspended, wait for internal resume */
+ mutex_unlock(&md->suspend_lock);
+ r = wait_on_bit(&md->flags, DMF_SUSPENDED_INTERNALLY, TASK_INTERRUPTIBLE);
+ if (r)
+ return r;
+ goto retry;
+ }
+
+ map = rcu_dereference_protected(md->map, lockdep_is_held(&md->suspend_lock));
+ if (!map || !dm_table_get_size(map))
+ goto out;
+
+ r = __dm_resume(md, map);
+ if (r)
+ goto out;
+
clear_bit(DMF_SUSPENDED, &md->flags);
r = 0;
* Internal suspend/resume works like userspace-driven suspend. It waits
* until all bios finish and prevents issuing new bios to the target drivers.
* It may be used only from the kernel.
- *
- * Internal suspend holds md->suspend_lock, which prevents interaction with
- * userspace-driven suspend.
*/
-void dm_internal_suspend(struct mapped_device *md)
+static void __dm_internal_suspend(struct mapped_device *md, unsigned suspend_flags)
{
- mutex_lock(&md->suspend_lock);
+ struct dm_table *map = NULL;
+
+ if (dm_suspended_internally_md(md))
+ return; /* nested internal suspend */
+
+ if (dm_suspended_md(md)) {
+ set_bit(DMF_SUSPENDED_INTERNALLY, &md->flags);
+ return; /* nest suspend */
+ }
+
+ map = rcu_dereference_protected(md->map, lockdep_is_held(&md->suspend_lock));
+
+ /*
+ * Using TASK_UNINTERRUPTIBLE because only NOFLUSH internal suspend is
+ * supported. Properly supporting a TASK_INTERRUPTIBLE internal suspend
+ * would require changing .presuspend to return an error -- avoid this
+ * until there is a need for more elaborate variants of internal suspend.
+ */
+ (void) __dm_suspend(md, map, suspend_flags, TASK_UNINTERRUPTIBLE);
+
+ set_bit(DMF_SUSPENDED_INTERNALLY, &md->flags);
+
+ dm_table_postsuspend_targets(map);
+}
+
+static void __dm_internal_resume(struct mapped_device *md)
+{
+ if (!dm_suspended_internally_md(md))
+ return; /* resume from nested internal suspend */
+
if (dm_suspended_md(md))
+ goto done; /* resume from nested suspend */
+
+ /*
+ * NOTE: existing callers don't need to call dm_table_resume_targets
+ * (which may fail -- so best to avoid it for now by passing NULL map)
+ */
+ (void) __dm_resume(md, NULL);
+
+done:
+ clear_bit(DMF_SUSPENDED_INTERNALLY, &md->flags);
+ smp_mb__after_atomic();
+ wake_up_bit(&md->flags, DMF_SUSPENDED_INTERNALLY);
+}
+
+void dm_internal_suspend_noflush(struct mapped_device *md)
+{
+ mutex_lock(&md->suspend_lock);
+ __dm_internal_suspend(md, DM_SUSPEND_NOFLUSH_FLAG);
+ mutex_unlock(&md->suspend_lock);
+}
+EXPORT_SYMBOL_GPL(dm_internal_suspend_noflush);
+
+void dm_internal_resume(struct mapped_device *md)
+{
+ mutex_lock(&md->suspend_lock);
+ __dm_internal_resume(md);
+ mutex_unlock(&md->suspend_lock);
+}
+EXPORT_SYMBOL_GPL(dm_internal_resume);
+
+/*
+ * Fast variants of internal suspend/resume hold md->suspend_lock,
+ * which prevents interaction with userspace-driven suspend.
+ */
+
+void dm_internal_suspend_fast(struct mapped_device *md)
+{
+ mutex_lock(&md->suspend_lock);
+ if (dm_suspended_md(md) || dm_suspended_internally_md(md))
return;
set_bit(DMF_BLOCK_IO_FOR_SUSPEND, &md->flags);
dm_wait_for_completion(md, TASK_UNINTERRUPTIBLE);
}
-void dm_internal_resume(struct mapped_device *md)
+void dm_internal_resume_fast(struct mapped_device *md)
{
- if (dm_suspended_md(md))
+ if (dm_suspended_md(md) || dm_suspended_internally_md(md))
goto done;
dm_queue_flush(md);
return test_bit(DMF_SUSPENDED, &md->flags);
}
+int dm_suspended_internally_md(struct mapped_device *md)
+{
+ return test_bit(DMF_SUSPENDED_INTERNALLY, &md->flags);
+}
+
int dm_test_deferred_remove_flag(struct mapped_device *md)
{
return test_bit(DMF_DEFERRED_REMOVE, &md->flags);
struct queue_limits *limits);
struct list_head *dm_table_get_devices(struct dm_table *t);
void dm_table_presuspend_targets(struct dm_table *t);
+void dm_table_presuspend_undo_targets(struct dm_table *t);
void dm_table_postsuspend_targets(struct dm_table *t);
int dm_table_resume_targets(struct dm_table *t);
int dm_table_any_congested(struct dm_table *t, int bdi_bits);
*/
int dm_suspended_md(struct mapped_device *md);
+/*
+ * Internal suspend and resume methods.
+ */
+int dm_suspended_internally_md(struct mapped_device *md);
+void dm_internal_suspend_fast(struct mapped_device *md);
+void dm_internal_resume_fast(struct mapped_device *md);
+void dm_internal_suspend_noflush(struct mapped_device *md);
+void dm_internal_resume(struct mapped_device *md);
+
/*
* Test if the device is scheduled for deferred remove.
*/
printk("md: %s still in use.\n",mdname(mddev));
if (did_freeze) {
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+ set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
}
err = -EBUSY;
mddev->ro = 1;
set_disk_ro(mddev->gendisk, 1);
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+ set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
+ md_wakeup_thread(mddev->thread);
sysfs_notify_dirent_safe(mddev->sysfs_state);
err = 0;
}
mutex_unlock(&mddev->open_mutex);
if (did_freeze) {
clear_bit(MD_RECOVERY_FROZEN, &mddev->recovery);
+ set_bit(MD_RECOVERY_NEEDED, &mddev->recovery);
md_wakeup_thread(mddev->thread);
}
return -EBUSY;
int r;
struct resize resize;
- if (old_size == new_size)
+ if (old_size == new_size) {
+ *new_root = root;
return 0;
+ }
resize.info = info;
resize.root = root;
} __packed;
+/*
+ * Locks a block using the btree node validator.
+ */
+int bn_read_lock(struct dm_btree_info *info, dm_block_t b,
+ struct dm_block **result);
+
void inc_children(struct dm_transaction_manager *tm, struct btree_node *n,
struct dm_btree_value_type *vt);
/*----------------------------------------------------------------*/
-static int bn_read_lock(struct dm_btree_info *info, dm_block_t b,
+int bn_read_lock(struct dm_btree_info *info, dm_block_t b,
struct dm_block **result)
{
return dm_tm_read_lock(info->tm, b, &btree_node_validator, result);
* FIXME: We shouldn't use a recursive algorithm when we have limited stack
* space. Also this only works for single level trees.
*/
-static int walk_node(struct ro_spine *s, dm_block_t block,
+static int walk_node(struct dm_btree_info *info, dm_block_t block,
int (*fn)(void *context, uint64_t *keys, void *leaf),
void *context)
{
int r;
unsigned i, nr;
+ struct dm_block *node;
struct btree_node *n;
uint64_t keys;
- r = ro_step(s, block);
- n = ro_node(s);
+ r = bn_read_lock(info, block, &node);
+ if (r)
+ return r;
+
+ n = dm_block_data(node);
nr = le32_to_cpu(n->header.nr_entries);
for (i = 0; i < nr; i++) {
if (le32_to_cpu(n->header.flags) & INTERNAL_NODE) {
- r = walk_node(s, value64(n, i), fn, context);
+ r = walk_node(info, value64(n, i), fn, context);
if (r)
goto out;
} else {
}
out:
- ro_pop(s);
+ dm_tm_unlock(info->tm, node);
return r;
}
int (*fn)(void *context, uint64_t *keys, void *leaf),
void *context)
{
- int r;
- struct ro_spine spine;
-
BUG_ON(info->levels > 1);
-
- init_ro_spine(&spine, info);
- r = walk_node(&spine, root, fn, context);
- exit_ro_spine(&spine);
-
- return r;
+ return walk_node(info, root, fn, context);
}
EXPORT_SYMBOL_GPL(dm_btree_walk);
{
struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
- return smm->ll.nr_blocks;
+ *count = smm->ll.nr_blocks;
+
+ return 0;
}
static int sm_bootstrap_get_nr_free(struct dm_space_map *sm, dm_block_t *count)
{
struct sm_metadata *smm = container_of(sm, struct sm_metadata, sm);
- return b < smm->begin ? 1 : 0;
+ *result = (b < smm->begin) ? 1 : 0;
+
+ return 0;
}
static int sm_bootstrap_count_is_more_than_one(struct dm_space_map *sm,
#include "dm-persistent-data-internal.h"
#include <linux/export.h>
+#include <linux/mutex.h>
+#include <linux/hash.h>
#include <linux/slab.h>
#include <linux/device-mapper.h>
/*----------------------------------------------------------------*/
+#define PREFETCH_SIZE 128
+#define PREFETCH_BITS 7
+#define PREFETCH_SENTINEL ((dm_block_t) -1ULL)
+
+struct prefetch_set {
+ struct mutex lock;
+ dm_block_t blocks[PREFETCH_SIZE];
+};
+
+static unsigned prefetch_hash(dm_block_t b)
+{
+ return hash_64(b, PREFETCH_BITS);
+}
+
+static void prefetch_wipe(struct prefetch_set *p)
+{
+ unsigned i;
+ for (i = 0; i < PREFETCH_SIZE; i++)
+ p->blocks[i] = PREFETCH_SENTINEL;
+}
+
+static void prefetch_init(struct prefetch_set *p)
+{
+ mutex_init(&p->lock);
+ prefetch_wipe(p);
+}
+
+static void prefetch_add(struct prefetch_set *p, dm_block_t b)
+{
+ unsigned h = prefetch_hash(b);
+
+ mutex_lock(&p->lock);
+ if (p->blocks[h] == PREFETCH_SENTINEL)
+ p->blocks[h] = b;
+
+ mutex_unlock(&p->lock);
+}
+
+static void prefetch_issue(struct prefetch_set *p, struct dm_block_manager *bm)
+{
+ unsigned i;
+
+ mutex_lock(&p->lock);
+
+ for (i = 0; i < PREFETCH_SIZE; i++)
+ if (p->blocks[i] != PREFETCH_SENTINEL) {
+ dm_bm_prefetch(bm, p->blocks[i]);
+ p->blocks[i] = PREFETCH_SENTINEL;
+ }
+
+ mutex_unlock(&p->lock);
+}
+
+/*----------------------------------------------------------------*/
+
struct shadow_info {
struct hlist_node hlist;
dm_block_t where;
spinlock_t lock;
struct hlist_head buckets[DM_HASH_SIZE];
+
+ struct prefetch_set prefetches;
};
/*----------------------------------------------------------------*/
for (i = 0; i < DM_HASH_SIZE; i++)
INIT_HLIST_HEAD(tm->buckets + i);
+ prefetch_init(&tm->prefetches);
+
return tm;
}
struct dm_block_validator *v,
struct dm_block **blk)
{
- if (tm->is_clone)
- return dm_bm_read_try_lock(tm->real->bm, b, v, blk);
+ if (tm->is_clone) {
+ int r = dm_bm_read_try_lock(tm->real->bm, b, v, blk);
+
+ if (r == -EWOULDBLOCK)
+ prefetch_add(&tm->real->prefetches, b);
+
+ return r;
+ }
return dm_bm_read_lock(tm->bm, b, v, blk);
}
return tm->bm;
}
+void dm_tm_issue_prefetches(struct dm_transaction_manager *tm)
+{
+ prefetch_issue(&tm->prefetches, tm->bm);
+}
+EXPORT_SYMBOL_GPL(dm_tm_issue_prefetches);
+
/*----------------------------------------------------------------*/
static int dm_tm_create_internal(struct dm_block_manager *bm,
struct dm_block_manager *dm_tm_get_bm(struct dm_transaction_manager *tm);
+/*
+ * If you're using a non-blocking clone the tm will build up a list of
+ * requested blocks that weren't in core. This call will request those
+ * blocks to be prefetched.
+ */
+void dm_tm_issue_prefetches(struct dm_transaction_manager *tm);
+
/*
* A little utility that ties the knot by producing a transaction manager
* that has a space map managed by the transaction manager...
goto out;
}
+ /* create a nice device name */
+ sprintf(dev->name, "saa7146 (%d)", saa7146_num);
+
DEB_EE("pci:%p\n", pci);
err = pci_enable_device(pci);
/* the rest + print status message */
- /* create a nice device name */
- sprintf(dev->name, "saa7146 (%d)", saa7146_num);
-
pr_info("found saa7146 @ mem %p (revision %d, irq %d) (0x%04x,0x%04x)\n",
dev->mem, dev->revision, pci->irq,
pci->subsystem_vendor, pci->subsystem_device);
case SYS_ATSC:
c->modulation = VSB_8;
break;
+ case SYS_ISDBS:
+ c->symbol_rate = 28860000;
+ c->rolloff = ROLLOFF_35;
+ c->bandwidth_hz = c->symbol_rate / 100 * 135;
+ break;
default:
c->modulation = QAM_AUTO;
break;
break;
case SYS_DVBS:
case SYS_TURBO:
+ case SYS_ISDBS:
rolloff = 135;
break;
case SYS_DVBS2:
memcpy(&state->frontend.ops, &ds3000_ops,
sizeof(struct dvb_frontend_ops));
state->frontend.demodulator_priv = state;
+
+ /*
+ * Some devices like T480 starts with voltage on. Be sure
+ * to turn voltage off during init, as this can otherwise
+ * interfere with Unicable SCR systems.
+ */
+ ds3000_set_voltage(&state->frontend, SEC_VOLTAGE_OFF);
return &state->frontend;
error3:
return s->status;
}
-int sp2_init(struct sp2 *s)
+static int sp2_init(struct sp2 *s)
{
int ret = 0;
u8 buf;
return ret;
}
-int sp2_exit(struct i2c_client *client)
+static int sp2_exit(struct i2c_client *client)
{
struct sp2 *s;
c->delivery_system = SYS_ISDBS;
layers = 0;
- ret = reg_read(state, 0xe8, val, 3);
+ ret = reg_read(state, 0xe6, val, 5);
if (ret == 0) {
- int slots;
u8 v;
+ c->stream_id = val[0] << 8 | val[1];
+
/* high/single layer */
- v = (val[0] & 0x70) >> 4;
+ v = (val[2] & 0x70) >> 4;
c->modulation = (v == 7) ? PSK_8 : QPSK;
c->fec_inner = fec_conv_sat[v];
c->layer[0].fec = c->fec_inner;
c->layer[0].modulation = c->modulation;
- c->layer[0].segment_count = val[1] & 0x3f; /* slots */
+ c->layer[0].segment_count = val[3] & 0x3f; /* slots */
/* low layer */
- v = (val[0] & 0x07);
+ v = (val[2] & 0x07);
c->layer[1].fec = fec_conv_sat[v];
if (v == 0) /* no low layer */
c->layer[1].segment_count = 0;
else
- c->layer[1].segment_count = val[2] & 0x3f; /* slots */
+ c->layer[1].segment_count = val[4] & 0x3f; /* slots */
/* actually, BPSK if v==1, but not defined in fe_modulation_t */
c->layer[1].modulation = QPSK;
layers = (v > 0) ? 2 : 1;
-
- slots = c->layer[0].segment_count + c->layer[1].segment_count;
- c->symbol_rate = 28860000 * slots / 48;
}
/* statistics */
u8 v;
c->isdbt_partial_reception = val[0] & 0x01;
- c->isdbt_sb_mode = (val[0] & 0xc0) == 0x01;
+ c->isdbt_sb_mode = (val[0] & 0xc0) == 0x40;
/* layer A */
v = (val[2] & 0x78) >> 3;
ret = smiapp_set_compose(subdev, fh, sel);
break;
default:
- BUG();
+ ret = -EINVAL;
}
mutex_unlock(&sensor->mutex);
for (line = 0; line < lines; line++) {
while (offset && offset >= sg_dma_len(sg)) {
offset -= sg_dma_len(sg);
- sg++;
+ sg = sg_next(sg);
}
if (lpi && line > 0 && !(line % lpi))
*(rp++) = cpu_to_le32(0); /* bits 63-32 */
todo -= (sg_dma_len(sg)-offset);
offset = 0;
- sg++;
+ sg = sg_next(sg);
while (todo > sg_dma_len(sg)) {
*(rp++) = cpu_to_le32(RISC_WRITE|
sg_dma_len(sg));
*(rp++) = cpu_to_le32(sg_dma_address(sg));
*(rp++) = cpu_to_le32(0); /* bits 63-32 */
todo -= sg_dma_len(sg);
- sg++;
+ sg = sg_next(sg);
}
*(rp++) = cpu_to_le32(RISC_WRITE|RISC_EOL|todo);
*(rp++) = cpu_to_le32(sg_dma_address(sg));
break;
/* attach tuner */
+ memset(&m88ts2022_config, 0, sizeof(m88ts2022_config));
m88ts2022_config.fe = fe0->dvb.frontend;
m88ts2022_config.clock = 27000000;
memset(&info, 0, sizeof(struct i2c_board_info));
/* port c - terrestrial/cable */
case 2:
/* attach frontend */
+ memset(&si2168_config, 0, sizeof(si2168_config));
si2168_config.i2c_adapter = &adapter;
si2168_config.fe = &fe0->dvb.frontend;
si2168_config.ts_mode = SI2168_TS_SERIAL;
port->i2c_client_demod = client_demod;
/* attach tuner */
+ memset(&si2157_config, 0, sizeof(si2157_config));
si2157_config.fe = fe0->dvb.frontend;
memset(&info, 0, sizeof(struct i2c_board_info));
strlcpy(info.type, "si2157", I2C_NAME_SIZE);
if (!status)
return IRQ_NONE;
- if (status & ~solo_dev->irq_mask) {
- solo_reg_write(solo_dev, SOLO_IRQ_STAT,
- status & ~solo_dev->irq_mask);
- status &= solo_dev->irq_mask;
- }
+ /* Acknowledge all interrupts immediately */
+ solo_reg_write(solo_dev, SOLO_IRQ_STAT, status);
if (status & SOLO_IRQ_PCI_ERR)
solo_p2m_error_isr(solo_dev);
if (status & SOLO_IRQ_G723)
solo_g723_isr(solo_dev);
- /* Clear all interrupts handled */
- solo_reg_write(solo_dev, SOLO_IRQ_STAT, status);
-
return IRQ_HANDLED;
}
config VIDEO_TW68
tristate "Techwell tw68x Video For Linux"
depends on VIDEO_DEV && PCI && VIDEO_V4L2
- select I2C_ALGOBIT
select VIDEOBUF2_DMA_SG
---help---
Support for Techwell tw68xx based frame grabber boards.
/* get irq */
err = devm_request_irq(&pci_dev->dev, pci_dev->irq, tw68_irq,
- IRQF_SHARED | IRQF_DISABLED, dev->name, dev);
+ IRQF_SHARED, dev->name, dev);
if (err < 0) {
pr_err("%s: can't get IRQ %d\n",
dev->name, pci_dev->irq);
config VIDEO_SAMSUNG_S5P_G2D
tristate "Samsung S5P and EXYNOS4 G2D 2d graphics accelerator driver"
depends on VIDEO_DEV && VIDEO_V4L2
- depends on PLAT_S5P || ARCH_EXYNOS || COMPILE_TEST
+ depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
depends on HAS_DMA
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
config VIDEO_SAMSUNG_S5P_JPEG
tristate "Samsung S5P/Exynos3250/Exynos4 JPEG codec driver"
depends on VIDEO_DEV && VIDEO_V4L2
- depends on PLAT_S5P || ARCH_EXYNOS || COMPILE_TEST
+ depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
depends on HAS_DMA
select VIDEOBUF2_DMA_CONTIG
select V4L2_MEM2MEM_DEV
config VIDEO_SAMSUNG_S5P_MFC
tristate "Samsung S5P MFC Video Codec"
depends on VIDEO_DEV && VIDEO_V4L2
- depends on PLAT_S5P || ARCH_EXYNOS || COMPILE_TEST
+ depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
depends on HAS_DMA
select VIDEOBUF2_DMA_CONTIG
default n
config VIDEO_SAMSUNG_EXYNOS4_IS
bool "Samsung S5P/EXYNOS4 SoC series Camera Subsystem driver"
depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API
- depends on (PLAT_S5P || ARCH_EXYNOS || COMPILE_TEST)
+ depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
depends on OF && COMMON_CLK
help
Say Y here to enable camera host interface devices for
return -ENXIO;
}
+#if defined(CONFIG_PM_RUNTIME) || defined(CONFIG_PM_SLEEP)
static int fimc_m2m_suspend(struct fimc_dev *fimc)
{
unsigned long flags;
return 0;
}
+#endif /* CONFIG_PM_RUNTIME || CONFIG_PM_SLEEP */
static const struct of_device_id fimc_of_match[];
unsigned long buffer, unsigned long size,
struct s5p_jpeg_ctx *ctx)
{
- int c, components, notfound;
+ int c, components = 0, notfound;
unsigned int height, width, word, subsampling = 0;
long length;
struct s5p_jpeg_buffer jpeg_buffer;
return 0;
}
+#if defined(CONFIG_PM_RUNTIME) || defined(CONFIG_PM_SLEEP)
static int s5p_jpeg_runtime_suspend(struct device *dev)
{
struct s5p_jpeg *jpeg = dev_get_drvdata(dev);
return 0;
}
+#endif /* CONFIG_PM_RUNTIME || CONFIG_PM_SLEEP */
+#ifdef CONFIG_PM_SLEEP
static int s5p_jpeg_suspend(struct device *dev)
{
if (pm_runtime_suspended(dev))
return s5p_jpeg_runtime_resume(dev);
}
+#endif
static const struct dev_pm_ops s5p_jpeg_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(s5p_jpeg_suspend, s5p_jpeg_resume)
config VIDEO_SAMSUNG_S5P_TV
bool "Samsung TV driver for S5P platform"
depends on PM_RUNTIME
- depends on PLAT_S5P || ARCH_EXYNOS || COMPILE_TEST
+ depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST
default n
---help---
Say Y here to enable selecting the TV output devices for
config VIDEO_VIVID
tristate "Virtual Video Test Driver"
- depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64
+ depends on VIDEO_DEV && VIDEO_V4L2 && !SPARC32 && !SPARC64 && FB
select FONT_SUPPORT
select FONT_8x16
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
select VIDEOBUF2_VMALLOC
default n
---help---
"\t\t bit 0=crop, 1=compose, 2=scale,\n"
"\t\t -1=user-controlled (default)");
-static unsigned multiplanar[VIVID_MAX_DEVS];
+static unsigned multiplanar[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = 1 };
module_param_array(multiplanar, uint, NULL, 0444);
-MODULE_PARM_DESC(multiplanar, " 0 (default) is alternating single and multiplanar devices,\n"
- "\t\t 1 is single planar devices,\n"
- "\t\t 2 is multiplanar devices");
+MODULE_PARM_DESC(multiplanar, " 1 (default) creates a single planar device, 2 creates a multiplanar device.");
/* Default: video + vbi-cap (raw and sliced) + radio rx + radio tx + sdr + vbi-out + vid-out */
static unsigned node_types[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = 0x1d3d };
/* start detecting feature set */
/* do we use single- or multi-planar? */
- if (multiplanar[inst] == 0)
- dev->multiplanar = inst & 1;
- else
- dev->multiplanar = multiplanar[inst] > 1;
+ dev->multiplanar = multiplanar[inst] > 1;
v4l2_info(&dev->v4l2_dev, "using %splanar format API\n",
dev->multiplanar ? "multi" : "single ");
tpg->black_line[plane] = vzalloc(max_w * pixelsz);
if (!tpg->black_line[plane])
return -ENOMEM;
- tpg->random_line[plane] = vzalloc(max_w * pixelsz);
+ tpg->random_line[plane] = vzalloc(max_w * 2 * pixelsz);
if (!tpg->random_line[plane])
return -ENOMEM;
}
fmerr("Unable to read firmware(%s) content\n", fw_name);
return ret;
}
- fmdbg("Firmware(%s) length : %d bytes\n", fw_name, fw_entry->size);
+ fmdbg("Firmware(%s) length : %zu bytes\n", fw_name, fw_entry->size);
fw_data = (void *)fw_entry->data;
fw_len = fw_entry->size;
if (press_type == 0)
rc_keyup(ictx->rdev);
else {
- if (ictx->rc_type == RC_BIT_RC6_MCE)
+ if (ictx->rc_type == RC_BIT_RC6_MCE ||
+ ictx->rc_type == RC_BIT_OTHER)
rc_keydown(ictx->rdev,
ictx->rc_type == RC_BIT_RC6_MCE ? RC_TYPE_RC6_MCE : RC_TYPE_OTHER,
ictx->rc_scancode, ictx->rc_toggle);
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int hix5hd2_ir_suspend(struct device *dev)
{
struct hix5hd2_ir_priv *priv = dev_get_drvdata(dev);
u32 scancode;
enum rc_type protocol;
- if (!(dev->enabled_protocols & (RC_BIT_RC5 | RC_BIT_RC5X)))
+ if (!(dev->enabled_protocols & (RC_BIT_RC5 | RC_BIT_RC5X | RC_BIT_RC5_SZ)))
return 0;
if (!is_timing_event(ev)) {
case 32:
if ((scancode & RC6_6A_LCC_MASK) == RC6_6A_MCE_CC) {
protocol = RC_TYPE_RC6_MCE;
- scancode &= ~RC6_6A_MCE_TOGGLE_MASK;
toggle = !!(scancode & RC6_6A_MCE_TOGGLE_MASK);
+ scancode &= ~RC6_6A_MCE_TOGGLE_MASK;
} else {
protocol = RC_BIT_RC6_6A_32;
toggle = 0;
return -ENOMEM;
dev->raw->dev = dev;
- dev->enabled_protocols = ~0;
dev->change_protocol = change_protocol;
rc = kfifo_alloc(&dev->raw->kfifo,
sizeof(struct ir_raw_event) * MAX_IR_EVENT_SIZE,
if (dev->change_protocol) {
u64 rc_type = (1 << rc_map->rc_type);
+ if (dev->driver_type == RC_DRIVER_IR_RAW)
+ rc_type |= RC_BIT_LIRC;
rc = dev->change_protocol(dev, &rc_type);
if (rc < 0)
goto out_raw;
if (priv) {
cancel_delayed_work(&priv->timer_sleep);
- hybrid_tuner_release_state(priv);
if (priv->firmware)
release_firmware(priv->firmware);
+ hybrid_tuner_release_state(priv);
}
mutex_unlock(&xc5000_list_mutex);
return af9035_wr_regs(d, reg, &val, 1);
}
-static int af9035_add_i2c_dev(struct dvb_usb_device *d, char *type, u8 addr,
- void *platform_data, struct i2c_adapter *adapter)
+static int af9035_add_i2c_dev(struct dvb_usb_device *d, const char *type,
+ u8 addr, void *platform_data, struct i2c_adapter *adapter)
{
int ret, num;
struct state *state = d_to_priv(d);
goto err;
}
- request_module(board_info.type);
+ request_module("%s", board_info.type);
/* register I2C device */
client = i2c_new_device(adapter, &board_info);
return ret;
}
-static int anysee_add_i2c_dev(struct dvb_usb_device *d, char *type, u8 addr,
- void *platform_data)
+static int anysee_add_i2c_dev(struct dvb_usb_device *d, const char *type,
+ u8 addr, void *platform_data)
{
int ret, num;
struct anysee_state *state = d_to_priv(d);
goto err;
}
- request_module(board_info.type);
+ request_module("%s", board_info.type);
/* register I2C device */
client = i2c_new_device(adapter, &board_info);
int em28xx_audio_setup(struct em28xx *dev)
{
int vid1, vid2, feat, cfg;
- u32 vid;
+ u32 vid = 0;
u8 i2s_samplerates;
if (dev->chip_id == CHIP_ID_EM2870 ||
em28xx_info("Registering input extension\n");
ir = kzalloc(sizeof(*ir), GFP_KERNEL);
+ if (!ir)
+ return -ENOMEM;
rc = rc_allocate_device();
- if (!ir || !rc)
+ if (!rc)
goto error;
/* record handles to ourself */
dev->bandwidth->val = bandwidth;
dev->bandwidth->cur.val = bandwidth;
- dev_dbg(dev->dev, "bandwidth selected=%d\n", bandwidth_lut[i].freq);
+ dev_dbg(dev->dev, "bandwidth selected=%d\n", bandwidth);
u16tmp = 0;
u16tmp |= ((bandwidth >> 0) & 0xff) << 0;
break;
case V4L2_PIX_FMT_JPEG:
case V4L2_PIX_FMT_MJPEG:
- buf->vb.v4l2_buf.length = jpgsize;
+ vb2_set_plane_payload(&buf->vb, 0, jpgsize);
memcpy(vbuf, tmpbuf, jpgsize);
break;
case V4L2_PIX_FMT_YUV422P:
if (usbvision->remove_pending) {
printk(KERN_INFO "%s: Final disconnect\n", __func__);
usbvision_release(usbvision);
+ return 0;
}
mutex_unlock(&usbvision->v4l2_lock);
if (usbvision->remove_pending) {
printk(KERN_INFO "%s: Final disconnect\n", __func__);
usbvision_release(usbvision);
+ return err_code;
}
mutex_unlock(&usbvision->v4l2_lock);
stream->ctrl = probe;
stream->cur_format = format;
stream->cur_frame = frame;
- stream->frame_size = fmt->fmt.pix.sizeimage;
done:
mutex_unlock(&stream->mutex);
static void uvc_video_validate_buffer(const struct uvc_streaming *stream,
struct uvc_buffer *buf)
{
- if (stream->frame_size != buf->bytesused &&
+ if (stream->ctrl.dwMaxVideoFrameSize != buf->bytesused &&
!(stream->cur_format->flags & UVC_FMT_FLAG_COMPRESSED))
buf->error = 1;
}
struct uvc_format *def_format;
struct uvc_format *cur_format;
struct uvc_frame *cur_frame;
- size_t frame_size;
/* Protect access to ctrl, cur_format, cur_frame and hardware video
* probe control.
/* Try to remap memory */
size = vma->vm_end - vma->vm_start;
vma->vm_page_prot = pgprot_noncached(vma->vm_page_prot);
+
+ /* the "vm_pgoff" is just used in v4l2 to find the
+ * corresponding buffer data structure which is allocated
+ * earlier and it does not mean the offset from the physical
+ * buffer start address as usual. So set it to 0 to pass
+ * the sanity check in vm_iomap_memory().
+ */
+ vma->vm_pgoff = 0;
+
retval = vm_iomap_memory(vma, mem->dma_handle, size);
if (retval) {
dev_err(q->dev, "mmap: remap failed with error %d. ",
parameters and other settings during frequency, voltage and
temperature changes
+config OMAP_GPMC
+ bool
+ help
+ This driver is for the General Purpose Memory Controller (GPMC)
+ present on Texas Instruments SoCs (e.g. OMAP2+). GPMC allows
+ interfacing to a variety of asynchronous as well as synchronous
+ memory drives like NOR, NAND, OneNAND, SRAM.
+
config MVEBU_DEVBUS
bool "Marvell EBU Device Bus Controller"
default y
analysis, especially for IOMMU/GART(Graphics Address
Relocation Table) module.
-config TEGRA30_MC
- bool "Tegra30 Memory Controller(MC) driver"
- default y
- depends on ARCH_TEGRA_3x_SOC
- help
- This driver is for the Memory Controller(MC) module available
- in Tegra30 SoCs, mainly for a address translation fault
- analysis, especially for IOMMU/SMMU(System Memory Management
- Unit) module.
-
config FSL_CORENET_CF
tristate "Freescale CoreNet Error Reporting"
depends on FSL_SOC_BOOKE
bool
depends on FSL_SOC
+source "drivers/memory/tegra/Kconfig"
+
endif
obj-$(CONFIG_ATMEL_SDRAMC) += atmel-sdramc.o
obj-$(CONFIG_TI_AEMIF) += ti-aemif.o
obj-$(CONFIG_TI_EMIF) += emif.o
+obj-$(CONFIG_OMAP_GPMC) += omap-gpmc.o
obj-$(CONFIG_FSL_CORENET_CF) += fsl-corenet-cf.o
obj-$(CONFIG_FSL_IFC) += fsl_ifc.o
obj-$(CONFIG_MVEBU_DEVBUS) += mvebu-devbus.o
obj-$(CONFIG_TEGRA20_MC) += tegra20-mc.o
-obj-$(CONFIG_TEGRA30_MC) += tegra30-mc.o
+
+obj-$(CONFIG_TEGRA_MC) += tegra/
--- /dev/null
+/*
+ * GPMC support functions
+ *
+ * Copyright (C) 2005-2006 Nokia Corporation
+ *
+ * Author: Juha Yrjola
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#undef DEBUG
+
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/ioport.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_mtd.h>
+#include <linux/of_device.h>
+#include <linux/omap-gpmc.h>
+#include <linux/mtd/nand.h>
+#include <linux/pm_runtime.h>
+
+#include <linux/platform_data/mtd-nand-omap2.h>
+#include <linux/platform_data/mtd-onenand-omap2.h>
+
+#include <asm/mach-types.h>
+
+#define DEVICE_NAME "omap-gpmc"
+
+/* GPMC register offsets */
+#define GPMC_REVISION 0x00
+#define GPMC_SYSCONFIG 0x10
+#define GPMC_SYSSTATUS 0x14
+#define GPMC_IRQSTATUS 0x18
+#define GPMC_IRQENABLE 0x1c
+#define GPMC_TIMEOUT_CONTROL 0x40
+#define GPMC_ERR_ADDRESS 0x44
+#define GPMC_ERR_TYPE 0x48
+#define GPMC_CONFIG 0x50
+#define GPMC_STATUS 0x54
+#define GPMC_PREFETCH_CONFIG1 0x1e0
+#define GPMC_PREFETCH_CONFIG2 0x1e4
+#define GPMC_PREFETCH_CONTROL 0x1ec
+#define GPMC_PREFETCH_STATUS 0x1f0
+#define GPMC_ECC_CONFIG 0x1f4
+#define GPMC_ECC_CONTROL 0x1f8
+#define GPMC_ECC_SIZE_CONFIG 0x1fc
+#define GPMC_ECC1_RESULT 0x200
+#define GPMC_ECC_BCH_RESULT_0 0x240 /* not available on OMAP2 */
+#define GPMC_ECC_BCH_RESULT_1 0x244 /* not available on OMAP2 */
+#define GPMC_ECC_BCH_RESULT_2 0x248 /* not available on OMAP2 */
+#define GPMC_ECC_BCH_RESULT_3 0x24c /* not available on OMAP2 */
+#define GPMC_ECC_BCH_RESULT_4 0x300 /* not available on OMAP2 */
+#define GPMC_ECC_BCH_RESULT_5 0x304 /* not available on OMAP2 */
+#define GPMC_ECC_BCH_RESULT_6 0x308 /* not available on OMAP2 */
+
+/* GPMC ECC control settings */
+#define GPMC_ECC_CTRL_ECCCLEAR 0x100
+#define GPMC_ECC_CTRL_ECCDISABLE 0x000
+#define GPMC_ECC_CTRL_ECCREG1 0x001
+#define GPMC_ECC_CTRL_ECCREG2 0x002
+#define GPMC_ECC_CTRL_ECCREG3 0x003
+#define GPMC_ECC_CTRL_ECCREG4 0x004
+#define GPMC_ECC_CTRL_ECCREG5 0x005
+#define GPMC_ECC_CTRL_ECCREG6 0x006
+#define GPMC_ECC_CTRL_ECCREG7 0x007
+#define GPMC_ECC_CTRL_ECCREG8 0x008
+#define GPMC_ECC_CTRL_ECCREG9 0x009
+
+#define GPMC_CONFIG_LIMITEDADDRESS BIT(1)
+
+#define GPMC_CONFIG2_CSEXTRADELAY BIT(7)
+#define GPMC_CONFIG3_ADVEXTRADELAY BIT(7)
+#define GPMC_CONFIG4_OEEXTRADELAY BIT(7)
+#define GPMC_CONFIG4_WEEXTRADELAY BIT(23)
+#define GPMC_CONFIG6_CYCLE2CYCLEDIFFCSEN BIT(6)
+#define GPMC_CONFIG6_CYCLE2CYCLESAMECSEN BIT(7)
+
+#define GPMC_CS0_OFFSET 0x60
+#define GPMC_CS_SIZE 0x30
+#define GPMC_BCH_SIZE 0x10
+
+#define GPMC_MEM_END 0x3FFFFFFF
+
+#define GPMC_CHUNK_SHIFT 24 /* 16 MB */
+#define GPMC_SECTION_SHIFT 28 /* 128 MB */
+
+#define CS_NUM_SHIFT 24
+#define ENABLE_PREFETCH (0x1 << 7)
+#define DMA_MPU_MODE 2
+
+#define GPMC_REVISION_MAJOR(l) ((l >> 4) & 0xf)
+#define GPMC_REVISION_MINOR(l) (l & 0xf)
+
+#define GPMC_HAS_WR_ACCESS 0x1
+#define GPMC_HAS_WR_DATA_MUX_BUS 0x2
+#define GPMC_HAS_MUX_AAD 0x4
+
+#define GPMC_NR_WAITPINS 4
+
+#define GPMC_CS_CONFIG1 0x00
+#define GPMC_CS_CONFIG2 0x04
+#define GPMC_CS_CONFIG3 0x08
+#define GPMC_CS_CONFIG4 0x0c
+#define GPMC_CS_CONFIG5 0x10
+#define GPMC_CS_CONFIG6 0x14
+#define GPMC_CS_CONFIG7 0x18
+#define GPMC_CS_NAND_COMMAND 0x1c
+#define GPMC_CS_NAND_ADDRESS 0x20
+#define GPMC_CS_NAND_DATA 0x24
+
+/* Control Commands */
+#define GPMC_CONFIG_RDY_BSY 0x00000001
+#define GPMC_CONFIG_DEV_SIZE 0x00000002
+#define GPMC_CONFIG_DEV_TYPE 0x00000003
+#define GPMC_SET_IRQ_STATUS 0x00000004
+
+#define GPMC_CONFIG1_WRAPBURST_SUPP (1 << 31)
+#define GPMC_CONFIG1_READMULTIPLE_SUPP (1 << 30)
+#define GPMC_CONFIG1_READTYPE_ASYNC (0 << 29)
+#define GPMC_CONFIG1_READTYPE_SYNC (1 << 29)
+#define GPMC_CONFIG1_WRITEMULTIPLE_SUPP (1 << 28)
+#define GPMC_CONFIG1_WRITETYPE_ASYNC (0 << 27)
+#define GPMC_CONFIG1_WRITETYPE_SYNC (1 << 27)
+#define GPMC_CONFIG1_CLKACTIVATIONTIME(val) ((val & 3) << 25)
+#define GPMC_CONFIG1_PAGE_LEN(val) ((val & 3) << 23)
+#define GPMC_CONFIG1_WAIT_READ_MON (1 << 22)
+#define GPMC_CONFIG1_WAIT_WRITE_MON (1 << 21)
+#define GPMC_CONFIG1_WAIT_MON_IIME(val) ((val & 3) << 18)
+#define GPMC_CONFIG1_WAIT_PIN_SEL(val) ((val & 3) << 16)
+#define GPMC_CONFIG1_DEVICESIZE(val) ((val & 3) << 12)
+#define GPMC_CONFIG1_DEVICESIZE_16 GPMC_CONFIG1_DEVICESIZE(1)
+#define GPMC_CONFIG1_DEVICETYPE(val) ((val & 3) << 10)
+#define GPMC_CONFIG1_DEVICETYPE_NOR GPMC_CONFIG1_DEVICETYPE(0)
+#define GPMC_CONFIG1_MUXTYPE(val) ((val & 3) << 8)
+#define GPMC_CONFIG1_TIME_PARA_GRAN (1 << 4)
+#define GPMC_CONFIG1_FCLK_DIV(val) (val & 3)
+#define GPMC_CONFIG1_FCLK_DIV2 (GPMC_CONFIG1_FCLK_DIV(1))
+#define GPMC_CONFIG1_FCLK_DIV3 (GPMC_CONFIG1_FCLK_DIV(2))
+#define GPMC_CONFIG1_FCLK_DIV4 (GPMC_CONFIG1_FCLK_DIV(3))
+#define GPMC_CONFIG7_CSVALID (1 << 6)
+
+#define GPMC_DEVICETYPE_NOR 0
+#define GPMC_DEVICETYPE_NAND 2
+#define GPMC_CONFIG_WRITEPROTECT 0x00000010
+#define WR_RD_PIN_MONITORING 0x00600000
+
+#define GPMC_ENABLE_IRQ 0x0000000d
+
+/* ECC commands */
+#define GPMC_ECC_READ 0 /* Reset Hardware ECC for read */
+#define GPMC_ECC_WRITE 1 /* Reset Hardware ECC for write */
+#define GPMC_ECC_READSYN 2 /* Reset before syndrom is read back */
+
+/* XXX: Only NAND irq has been considered,currently these are the only ones used
+ */
+#define GPMC_NR_IRQ 2
+
+struct gpmc_cs_data {
+ const char *name;
+
+#define GPMC_CS_RESERVED (1 << 0)
+ u32 flags;
+
+ struct resource mem;
+};
+
+struct gpmc_client_irq {
+ unsigned irq;
+ u32 bitmask;
+};
+
+/* Structure to save gpmc cs context */
+struct gpmc_cs_config {
+ u32 config1;
+ u32 config2;
+ u32 config3;
+ u32 config4;
+ u32 config5;
+ u32 config6;
+ u32 config7;
+ int is_valid;
+};
+
+/*
+ * Structure to save/restore gpmc context
+ * to support core off on OMAP3
+ */
+struct omap3_gpmc_regs {
+ u32 sysconfig;
+ u32 irqenable;
+ u32 timeout_ctrl;
+ u32 config;
+ u32 prefetch_config1;
+ u32 prefetch_config2;
+ u32 prefetch_control;
+ struct gpmc_cs_config cs_context[GPMC_CS_NUM];
+};
+
+static struct gpmc_client_irq gpmc_client_irq[GPMC_NR_IRQ];
+static struct irq_chip gpmc_irq_chip;
+static int gpmc_irq_start;
+
+static struct resource gpmc_mem_root;
+static struct gpmc_cs_data gpmc_cs[GPMC_CS_NUM];
+static DEFINE_SPINLOCK(gpmc_mem_lock);
+/* Define chip-selects as reserved by default until probe completes */
+static unsigned int gpmc_cs_num = GPMC_CS_NUM;
+static unsigned int gpmc_nr_waitpins;
+static struct device *gpmc_dev;
+static int gpmc_irq;
+static resource_size_t phys_base, mem_size;
+static unsigned gpmc_capability;
+static void __iomem *gpmc_base;
+
+static struct clk *gpmc_l3_clk;
+
+static irqreturn_t gpmc_handle_irq(int irq, void *dev);
+
+static void gpmc_write_reg(int idx, u32 val)
+{
+ writel_relaxed(val, gpmc_base + idx);
+}
+
+static u32 gpmc_read_reg(int idx)
+{
+ return readl_relaxed(gpmc_base + idx);
+}
+
+void gpmc_cs_write_reg(int cs, int idx, u32 val)
+{
+ void __iomem *reg_addr;
+
+ reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
+ writel_relaxed(val, reg_addr);
+}
+
+static u32 gpmc_cs_read_reg(int cs, int idx)
+{
+ void __iomem *reg_addr;
+
+ reg_addr = gpmc_base + GPMC_CS0_OFFSET + (cs * GPMC_CS_SIZE) + idx;
+ return readl_relaxed(reg_addr);
+}
+
+/* TODO: Add support for gpmc_fck to clock framework and use it */
+static unsigned long gpmc_get_fclk_period(void)
+{
+ unsigned long rate = clk_get_rate(gpmc_l3_clk);
+
+ rate /= 1000;
+ rate = 1000000000 / rate; /* In picoseconds */
+
+ return rate;
+}
+
+static unsigned int gpmc_ns_to_ticks(unsigned int time_ns)
+{
+ unsigned long tick_ps;
+
+ /* Calculate in picosecs to yield more exact results */
+ tick_ps = gpmc_get_fclk_period();
+
+ return (time_ns * 1000 + tick_ps - 1) / tick_ps;
+}
+
+static unsigned int gpmc_ps_to_ticks(unsigned int time_ps)
+{
+ unsigned long tick_ps;
+
+ /* Calculate in picosecs to yield more exact results */
+ tick_ps = gpmc_get_fclk_period();
+
+ return (time_ps + tick_ps - 1) / tick_ps;
+}
+
+unsigned int gpmc_ticks_to_ns(unsigned int ticks)
+{
+ return ticks * gpmc_get_fclk_period() / 1000;
+}
+
+static unsigned int gpmc_ticks_to_ps(unsigned int ticks)
+{
+ return ticks * gpmc_get_fclk_period();
+}
+
+static unsigned int gpmc_round_ps_to_ticks(unsigned int time_ps)
+{
+ unsigned long ticks = gpmc_ps_to_ticks(time_ps);
+
+ return ticks * gpmc_get_fclk_period();
+}
+
+static inline void gpmc_cs_modify_reg(int cs, int reg, u32 mask, bool value)
+{
+ u32 l;
+
+ l = gpmc_cs_read_reg(cs, reg);
+ if (value)
+ l |= mask;
+ else
+ l &= ~mask;
+ gpmc_cs_write_reg(cs, reg, l);
+}
+
+static void gpmc_cs_bool_timings(int cs, const struct gpmc_bool_timings *p)
+{
+ gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG1,
+ GPMC_CONFIG1_TIME_PARA_GRAN,
+ p->time_para_granularity);
+ gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG2,
+ GPMC_CONFIG2_CSEXTRADELAY, p->cs_extra_delay);
+ gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG3,
+ GPMC_CONFIG3_ADVEXTRADELAY, p->adv_extra_delay);
+ gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG4,
+ GPMC_CONFIG4_OEEXTRADELAY, p->oe_extra_delay);
+ gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG4,
+ GPMC_CONFIG4_OEEXTRADELAY, p->we_extra_delay);
+ gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG6,
+ GPMC_CONFIG6_CYCLE2CYCLESAMECSEN,
+ p->cycle2cyclesamecsen);
+ gpmc_cs_modify_reg(cs, GPMC_CS_CONFIG6,
+ GPMC_CONFIG6_CYCLE2CYCLEDIFFCSEN,
+ p->cycle2cyclediffcsen);
+}
+
+#ifdef DEBUG
+static int get_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
+ bool raw, bool noval, int shift,
+ const char *name)
+{
+ u32 l;
+ int nr_bits, max_value, mask;
+
+ l = gpmc_cs_read_reg(cs, reg);
+ nr_bits = end_bit - st_bit + 1;
+ max_value = (1 << nr_bits) - 1;
+ mask = max_value << st_bit;
+ l = (l & mask) >> st_bit;
+ if (shift)
+ l = (shift << l);
+ if (noval && (l == 0))
+ return 0;
+ if (!raw) {
+ unsigned int time_ns_min, time_ns, time_ns_max;
+
+ time_ns_min = gpmc_ticks_to_ns(l ? l - 1 : 0);
+ time_ns = gpmc_ticks_to_ns(l);
+ time_ns_max = gpmc_ticks_to_ns(l + 1 > max_value ?
+ max_value : l + 1);
+ pr_info("gpmc,%s = <%u> (%u - %u ns, %i ticks)\n",
+ name, time_ns, time_ns_min, time_ns_max, l);
+ } else {
+ pr_info("gpmc,%s = <%u>\n", name, l);
+ }
+
+ return l;
+}
+
+#define GPMC_PRINT_CONFIG(cs, config) \
+ pr_info("cs%i %s: 0x%08x\n", cs, #config, \
+ gpmc_cs_read_reg(cs, config))
+#define GPMC_GET_RAW(reg, st, end, field) \
+ get_gpmc_timing_reg(cs, (reg), (st), (end), 1, 0, 0, field)
+#define GPMC_GET_RAW_BOOL(reg, st, end, field) \
+ get_gpmc_timing_reg(cs, (reg), (st), (end), 1, 1, 0, field)
+#define GPMC_GET_RAW_SHIFT(reg, st, end, shift, field) \
+ get_gpmc_timing_reg(cs, (reg), (st), (end), 1, 1, (shift), field)
+#define GPMC_GET_TICKS(reg, st, end, field) \
+ get_gpmc_timing_reg(cs, (reg), (st), (end), 0, 0, 0, field)
+
+static void gpmc_show_regs(int cs, const char *desc)
+{
+ pr_info("gpmc cs%i %s:\n", cs, desc);
+ GPMC_PRINT_CONFIG(cs, GPMC_CS_CONFIG1);
+ GPMC_PRINT_CONFIG(cs, GPMC_CS_CONFIG2);
+ GPMC_PRINT_CONFIG(cs, GPMC_CS_CONFIG3);
+ GPMC_PRINT_CONFIG(cs, GPMC_CS_CONFIG4);
+ GPMC_PRINT_CONFIG(cs, GPMC_CS_CONFIG5);
+ GPMC_PRINT_CONFIG(cs, GPMC_CS_CONFIG6);
+}
+
+/*
+ * Note that gpmc,wait-pin handing wrongly assumes bit 8 is available,
+ * see commit c9fb809.
+ */
+static void gpmc_cs_show_timings(int cs, const char *desc)
+{
+ gpmc_show_regs(cs, desc);
+
+ pr_info("gpmc cs%i access configuration:\n", cs);
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 4, 4, "time-para-granularity");
+ GPMC_GET_RAW(GPMC_CS_CONFIG1, 8, 9, "mux-add-data");
+ GPMC_GET_RAW(GPMC_CS_CONFIG1, 12, 13, "device-width");
+ GPMC_GET_RAW(GPMC_CS_CONFIG1, 16, 17, "wait-pin");
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 21, 21, "wait-on-write");
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 22, 22, "wait-on-read");
+ GPMC_GET_RAW_SHIFT(GPMC_CS_CONFIG1, 23, 24, 4, "burst-length");
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 27, 27, "sync-write");
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 28, 28, "burst-write");
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 29, 29, "gpmc,sync-read");
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 30, 30, "burst-read");
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG1, 31, 31, "burst-wrap");
+
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG2, 7, 7, "cs-extra-delay");
+
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG3, 7, 7, "adv-extra-delay");
+
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG4, 23, 23, "we-extra-delay");
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG4, 7, 7, "oe-extra-delay");
+
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG6, 7, 7, "cycle2cycle-samecsen");
+ GPMC_GET_RAW_BOOL(GPMC_CS_CONFIG6, 6, 6, "cycle2cycle-diffcsen");
+
+ pr_info("gpmc cs%i timings configuration:\n", cs);
+ GPMC_GET_TICKS(GPMC_CS_CONFIG2, 0, 3, "cs-on-ns");
+ GPMC_GET_TICKS(GPMC_CS_CONFIG2, 8, 12, "cs-rd-off-ns");
+ GPMC_GET_TICKS(GPMC_CS_CONFIG2, 16, 20, "cs-wr-off-ns");
+
+ GPMC_GET_TICKS(GPMC_CS_CONFIG3, 0, 3, "adv-on-ns");
+ GPMC_GET_TICKS(GPMC_CS_CONFIG3, 8, 12, "adv-rd-off-ns");
+ GPMC_GET_TICKS(GPMC_CS_CONFIG3, 16, 20, "adv-wr-off-ns");
+
+ GPMC_GET_TICKS(GPMC_CS_CONFIG4, 0, 3, "oe-on-ns");
+ GPMC_GET_TICKS(GPMC_CS_CONFIG4, 8, 12, "oe-off-ns");
+ GPMC_GET_TICKS(GPMC_CS_CONFIG4, 16, 19, "we-on-ns");
+ GPMC_GET_TICKS(GPMC_CS_CONFIG4, 24, 28, "we-off-ns");
+
+ GPMC_GET_TICKS(GPMC_CS_CONFIG5, 0, 4, "rd-cycle-ns");
+ GPMC_GET_TICKS(GPMC_CS_CONFIG5, 8, 12, "wr-cycle-ns");
+ GPMC_GET_TICKS(GPMC_CS_CONFIG5, 16, 20, "access-ns");
+
+ GPMC_GET_TICKS(GPMC_CS_CONFIG5, 24, 27, "page-burst-access-ns");
+
+ GPMC_GET_TICKS(GPMC_CS_CONFIG6, 0, 3, "bus-turnaround-ns");
+ GPMC_GET_TICKS(GPMC_CS_CONFIG6, 8, 11, "cycle2cycle-delay-ns");
+
+ GPMC_GET_TICKS(GPMC_CS_CONFIG1, 18, 19, "wait-monitoring-ns");
+ GPMC_GET_TICKS(GPMC_CS_CONFIG1, 25, 26, "clk-activation-ns");
+
+ GPMC_GET_TICKS(GPMC_CS_CONFIG6, 16, 19, "wr-data-mux-bus-ns");
+ GPMC_GET_TICKS(GPMC_CS_CONFIG6, 24, 28, "wr-access-ns");
+}
+#else
+static inline void gpmc_cs_show_timings(int cs, const char *desc)
+{
+}
+#endif
+
+static int set_gpmc_timing_reg(int cs, int reg, int st_bit, int end_bit,
+ int time, const char *name)
+{
+ u32 l;
+ int ticks, mask, nr_bits;
+
+ if (time == 0)
+ ticks = 0;
+ else
+ ticks = gpmc_ns_to_ticks(time);
+ nr_bits = end_bit - st_bit + 1;
+ mask = (1 << nr_bits) - 1;
+
+ if (ticks > mask) {
+ pr_err("%s: GPMC error! CS%d: %s: %d ns, %d ticks > %d\n",
+ __func__, cs, name, time, ticks, mask);
+
+ return -1;
+ }
+
+ l = gpmc_cs_read_reg(cs, reg);
+#ifdef DEBUG
+ printk(KERN_INFO
+ "GPMC CS%d: %-10s: %3d ticks, %3lu ns (was %3i ticks) %3d ns\n",
+ cs, name, ticks, gpmc_get_fclk_period() * ticks / 1000,
+ (l >> st_bit) & mask, time);
+#endif
+ l &= ~(mask << st_bit);
+ l |= ticks << st_bit;
+ gpmc_cs_write_reg(cs, reg, l);
+
+ return 0;
+}
+
+#define GPMC_SET_ONE(reg, st, end, field) \
+ if (set_gpmc_timing_reg(cs, (reg), (st), (end), \
+ t->field, #field) < 0) \
+ return -1
+
+int gpmc_calc_divider(unsigned int sync_clk)
+{
+ int div;
+ u32 l;
+
+ l = sync_clk + (gpmc_get_fclk_period() - 1);
+ div = l / gpmc_get_fclk_period();
+ if (div > 4)
+ return -1;
+ if (div <= 0)
+ div = 1;
+
+ return div;
+}
+
+int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t)
+{
+ int div;
+ u32 l;
+
+ gpmc_cs_show_timings(cs, "before gpmc_cs_set_timings");
+ div = gpmc_calc_divider(t->sync_clk);
+ if (div < 0)
+ return div;
+
+ GPMC_SET_ONE(GPMC_CS_CONFIG2, 0, 3, cs_on);
+ GPMC_SET_ONE(GPMC_CS_CONFIG2, 8, 12, cs_rd_off);
+ GPMC_SET_ONE(GPMC_CS_CONFIG2, 16, 20, cs_wr_off);
+
+ GPMC_SET_ONE(GPMC_CS_CONFIG3, 0, 3, adv_on);
+ GPMC_SET_ONE(GPMC_CS_CONFIG3, 8, 12, adv_rd_off);
+ GPMC_SET_ONE(GPMC_CS_CONFIG3, 16, 20, adv_wr_off);
+
+ GPMC_SET_ONE(GPMC_CS_CONFIG4, 0, 3, oe_on);
+ GPMC_SET_ONE(GPMC_CS_CONFIG4, 8, 12, oe_off);
+ GPMC_SET_ONE(GPMC_CS_CONFIG4, 16, 19, we_on);
+ GPMC_SET_ONE(GPMC_CS_CONFIG4, 24, 28, we_off);
+
+ GPMC_SET_ONE(GPMC_CS_CONFIG5, 0, 4, rd_cycle);
+ GPMC_SET_ONE(GPMC_CS_CONFIG5, 8, 12, wr_cycle);
+ GPMC_SET_ONE(GPMC_CS_CONFIG5, 16, 20, access);
+
+ GPMC_SET_ONE(GPMC_CS_CONFIG5, 24, 27, page_burst_access);
+
+ GPMC_SET_ONE(GPMC_CS_CONFIG6, 0, 3, bus_turnaround);
+ GPMC_SET_ONE(GPMC_CS_CONFIG6, 8, 11, cycle2cycle_delay);
+
+ GPMC_SET_ONE(GPMC_CS_CONFIG1, 18, 19, wait_monitoring);
+ GPMC_SET_ONE(GPMC_CS_CONFIG1, 25, 26, clk_activation);
+
+ if (gpmc_capability & GPMC_HAS_WR_DATA_MUX_BUS)
+ GPMC_SET_ONE(GPMC_CS_CONFIG6, 16, 19, wr_data_mux_bus);
+ if (gpmc_capability & GPMC_HAS_WR_ACCESS)
+ GPMC_SET_ONE(GPMC_CS_CONFIG6, 24, 28, wr_access);
+
+ /* caller is expected to have initialized CONFIG1 to cover
+ * at least sync vs async
+ */
+ l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG1);
+ if (l & (GPMC_CONFIG1_READTYPE_SYNC | GPMC_CONFIG1_WRITETYPE_SYNC)) {
+#ifdef DEBUG
+ printk(KERN_INFO "GPMC CS%d CLK period is %lu ns (div %d)\n",
+ cs, (div * gpmc_get_fclk_period()) / 1000, div);
+#endif
+ l &= ~0x03;
+ l |= (div - 1);
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, l);
+ }
+
+ gpmc_cs_bool_timings(cs, &t->bool_timings);
+ gpmc_cs_show_timings(cs, "after gpmc_cs_set_timings");
+
+ return 0;
+}
+
+static int gpmc_cs_set_memconf(int cs, u32 base, u32 size)
+{
+ u32 l;
+ u32 mask;
+
+ /*
+ * Ensure that base address is aligned on a
+ * boundary equal to or greater than size.
+ */
+ if (base & (size - 1))
+ return -EINVAL;
+
+ mask = (1 << GPMC_SECTION_SHIFT) - size;
+ l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
+ l &= ~0x3f;
+ l = (base >> GPMC_CHUNK_SHIFT) & 0x3f;
+ l &= ~(0x0f << 8);
+ l |= ((mask >> GPMC_CHUNK_SHIFT) & 0x0f) << 8;
+ l |= GPMC_CONFIG7_CSVALID;
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
+
+ return 0;
+}
+
+static void gpmc_cs_enable_mem(int cs)
+{
+ u32 l;
+
+ l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
+ l |= GPMC_CONFIG7_CSVALID;
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
+}
+
+static void gpmc_cs_disable_mem(int cs)
+{
+ u32 l;
+
+ l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
+ l &= ~GPMC_CONFIG7_CSVALID;
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG7, l);
+}
+
+static void gpmc_cs_get_memconf(int cs, u32 *base, u32 *size)
+{
+ u32 l;
+ u32 mask;
+
+ l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
+ *base = (l & 0x3f) << GPMC_CHUNK_SHIFT;
+ mask = (l >> 8) & 0x0f;
+ *size = (1 << GPMC_SECTION_SHIFT) - (mask << GPMC_CHUNK_SHIFT);
+}
+
+static int gpmc_cs_mem_enabled(int cs)
+{
+ u32 l;
+
+ l = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG7);
+ return l & GPMC_CONFIG7_CSVALID;
+}
+
+static void gpmc_cs_set_reserved(int cs, int reserved)
+{
+ struct gpmc_cs_data *gpmc = &gpmc_cs[cs];
+
+ gpmc->flags |= GPMC_CS_RESERVED;
+}
+
+static bool gpmc_cs_reserved(int cs)
+{
+ struct gpmc_cs_data *gpmc = &gpmc_cs[cs];
+
+ return gpmc->flags & GPMC_CS_RESERVED;
+}
+
+static void gpmc_cs_set_name(int cs, const char *name)
+{
+ struct gpmc_cs_data *gpmc = &gpmc_cs[cs];
+
+ gpmc->name = name;
+}
+
+const char *gpmc_cs_get_name(int cs)
+{
+ struct gpmc_cs_data *gpmc = &gpmc_cs[cs];
+
+ return gpmc->name;
+}
+
+static unsigned long gpmc_mem_align(unsigned long size)
+{
+ int order;
+
+ size = (size - 1) >> (GPMC_CHUNK_SHIFT - 1);
+ order = GPMC_CHUNK_SHIFT - 1;
+ do {
+ size >>= 1;
+ order++;
+ } while (size);
+ size = 1 << order;
+ return size;
+}
+
+static int gpmc_cs_insert_mem(int cs, unsigned long base, unsigned long size)
+{
+ struct gpmc_cs_data *gpmc = &gpmc_cs[cs];
+ struct resource *res = &gpmc->mem;
+ int r;
+
+ size = gpmc_mem_align(size);
+ spin_lock(&gpmc_mem_lock);
+ res->start = base;
+ res->end = base + size - 1;
+ r = request_resource(&gpmc_mem_root, res);
+ spin_unlock(&gpmc_mem_lock);
+
+ return r;
+}
+
+static int gpmc_cs_delete_mem(int cs)
+{
+ struct gpmc_cs_data *gpmc = &gpmc_cs[cs];
+ struct resource *res = &gpmc->mem;
+ int r;
+
+ spin_lock(&gpmc_mem_lock);
+ r = release_resource(res);
+ res->start = 0;
+ res->end = 0;
+ spin_unlock(&gpmc_mem_lock);
+
+ return r;
+}
+
+/**
+ * gpmc_cs_remap - remaps a chip-select physical base address
+ * @cs: chip-select to remap
+ * @base: physical base address to re-map chip-select to
+ *
+ * Re-maps a chip-select to a new physical base address specified by
+ * "base". Returns 0 on success and appropriate negative error code
+ * on failure.
+ */
+static int gpmc_cs_remap(int cs, u32 base)
+{
+ int ret;
+ u32 old_base, size;
+
+ if (cs > gpmc_cs_num) {
+ pr_err("%s: requested chip-select is disabled\n", __func__);
+ return -ENODEV;
+ }
+
+ /*
+ * Make sure we ignore any device offsets from the GPMC partition
+ * allocated for the chip select and that the new base confirms
+ * to the GPMC 16MB minimum granularity.
+ */
+ base &= ~(SZ_16M - 1);
+
+ gpmc_cs_get_memconf(cs, &old_base, &size);
+ if (base == old_base)
+ return 0;
+
+ ret = gpmc_cs_delete_mem(cs);
+ if (ret < 0)
+ return ret;
+
+ ret = gpmc_cs_insert_mem(cs, base, size);
+ if (ret < 0)
+ return ret;
+
+ ret = gpmc_cs_set_memconf(cs, base, size);
+
+ return ret;
+}
+
+int gpmc_cs_request(int cs, unsigned long size, unsigned long *base)
+{
+ struct gpmc_cs_data *gpmc = &gpmc_cs[cs];
+ struct resource *res = &gpmc->mem;
+ int r = -1;
+
+ if (cs > gpmc_cs_num) {
+ pr_err("%s: requested chip-select is disabled\n", __func__);
+ return -ENODEV;
+ }
+ size = gpmc_mem_align(size);
+ if (size > (1 << GPMC_SECTION_SHIFT))
+ return -ENOMEM;
+
+ spin_lock(&gpmc_mem_lock);
+ if (gpmc_cs_reserved(cs)) {
+ r = -EBUSY;
+ goto out;
+ }
+ if (gpmc_cs_mem_enabled(cs))
+ r = adjust_resource(res, res->start & ~(size - 1), size);
+ if (r < 0)
+ r = allocate_resource(&gpmc_mem_root, res, size, 0, ~0,
+ size, NULL, NULL);
+ if (r < 0)
+ goto out;
+
+ /* Disable CS while changing base address and size mask */
+ gpmc_cs_disable_mem(cs);
+
+ r = gpmc_cs_set_memconf(cs, res->start, resource_size(res));
+ if (r < 0) {
+ release_resource(res);
+ goto out;
+ }
+
+ /* Enable CS */
+ gpmc_cs_enable_mem(cs);
+ *base = res->start;
+ gpmc_cs_set_reserved(cs, 1);
+out:
+ spin_unlock(&gpmc_mem_lock);
+ return r;
+}
+EXPORT_SYMBOL(gpmc_cs_request);
+
+void gpmc_cs_free(int cs)
+{
+ struct gpmc_cs_data *gpmc = &gpmc_cs[cs];
+ struct resource *res = &gpmc->mem;
+
+ spin_lock(&gpmc_mem_lock);
+ if (cs >= gpmc_cs_num || cs < 0 || !gpmc_cs_reserved(cs)) {
+ printk(KERN_ERR "Trying to free non-reserved GPMC CS%d\n", cs);
+ BUG();
+ spin_unlock(&gpmc_mem_lock);
+ return;
+ }
+ gpmc_cs_disable_mem(cs);
+ if (res->flags)
+ release_resource(res);
+ gpmc_cs_set_reserved(cs, 0);
+ spin_unlock(&gpmc_mem_lock);
+}
+EXPORT_SYMBOL(gpmc_cs_free);
+
+/**
+ * gpmc_configure - write request to configure gpmc
+ * @cmd: command type
+ * @wval: value to write
+ * @return status of the operation
+ */
+int gpmc_configure(int cmd, int wval)
+{
+ u32 regval;
+
+ switch (cmd) {
+ case GPMC_ENABLE_IRQ:
+ gpmc_write_reg(GPMC_IRQENABLE, wval);
+ break;
+
+ case GPMC_SET_IRQ_STATUS:
+ gpmc_write_reg(GPMC_IRQSTATUS, wval);
+ break;
+
+ case GPMC_CONFIG_WP:
+ regval = gpmc_read_reg(GPMC_CONFIG);
+ if (wval)
+ regval &= ~GPMC_CONFIG_WRITEPROTECT; /* WP is ON */
+ else
+ regval |= GPMC_CONFIG_WRITEPROTECT; /* WP is OFF */
+ gpmc_write_reg(GPMC_CONFIG, regval);
+ break;
+
+ default:
+ pr_err("%s: command not supported\n", __func__);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(gpmc_configure);
+
+void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs)
+{
+ int i;
+
+ reg->gpmc_status = gpmc_base + GPMC_STATUS;
+ reg->gpmc_nand_command = gpmc_base + GPMC_CS0_OFFSET +
+ GPMC_CS_NAND_COMMAND + GPMC_CS_SIZE * cs;
+ reg->gpmc_nand_address = gpmc_base + GPMC_CS0_OFFSET +
+ GPMC_CS_NAND_ADDRESS + GPMC_CS_SIZE * cs;
+ reg->gpmc_nand_data = gpmc_base + GPMC_CS0_OFFSET +
+ GPMC_CS_NAND_DATA + GPMC_CS_SIZE * cs;
+ reg->gpmc_prefetch_config1 = gpmc_base + GPMC_PREFETCH_CONFIG1;
+ reg->gpmc_prefetch_config2 = gpmc_base + GPMC_PREFETCH_CONFIG2;
+ reg->gpmc_prefetch_control = gpmc_base + GPMC_PREFETCH_CONTROL;
+ reg->gpmc_prefetch_status = gpmc_base + GPMC_PREFETCH_STATUS;
+ reg->gpmc_ecc_config = gpmc_base + GPMC_ECC_CONFIG;
+ reg->gpmc_ecc_control = gpmc_base + GPMC_ECC_CONTROL;
+ reg->gpmc_ecc_size_config = gpmc_base + GPMC_ECC_SIZE_CONFIG;
+ reg->gpmc_ecc1_result = gpmc_base + GPMC_ECC1_RESULT;
+
+ for (i = 0; i < GPMC_BCH_NUM_REMAINDER; i++) {
+ reg->gpmc_bch_result0[i] = gpmc_base + GPMC_ECC_BCH_RESULT_0 +
+ GPMC_BCH_SIZE * i;
+ reg->gpmc_bch_result1[i] = gpmc_base + GPMC_ECC_BCH_RESULT_1 +
+ GPMC_BCH_SIZE * i;
+ reg->gpmc_bch_result2[i] = gpmc_base + GPMC_ECC_BCH_RESULT_2 +
+ GPMC_BCH_SIZE * i;
+ reg->gpmc_bch_result3[i] = gpmc_base + GPMC_ECC_BCH_RESULT_3 +
+ GPMC_BCH_SIZE * i;
+ reg->gpmc_bch_result4[i] = gpmc_base + GPMC_ECC_BCH_RESULT_4 +
+ i * GPMC_BCH_SIZE;
+ reg->gpmc_bch_result5[i] = gpmc_base + GPMC_ECC_BCH_RESULT_5 +
+ i * GPMC_BCH_SIZE;
+ reg->gpmc_bch_result6[i] = gpmc_base + GPMC_ECC_BCH_RESULT_6 +
+ i * GPMC_BCH_SIZE;
+ }
+}
+
+int gpmc_get_client_irq(unsigned irq_config)
+{
+ int i;
+
+ if (hweight32(irq_config) > 1)
+ return 0;
+
+ for (i = 0; i < GPMC_NR_IRQ; i++)
+ if (gpmc_client_irq[i].bitmask & irq_config)
+ return gpmc_client_irq[i].irq;
+
+ return 0;
+}
+
+static int gpmc_irq_endis(unsigned irq, bool endis)
+{
+ int i;
+ u32 regval;
+
+ for (i = 0; i < GPMC_NR_IRQ; i++)
+ if (irq == gpmc_client_irq[i].irq) {
+ regval = gpmc_read_reg(GPMC_IRQENABLE);
+ if (endis)
+ regval |= gpmc_client_irq[i].bitmask;
+ else
+ regval &= ~gpmc_client_irq[i].bitmask;
+ gpmc_write_reg(GPMC_IRQENABLE, regval);
+ break;
+ }
+
+ return 0;
+}
+
+static void gpmc_irq_disable(struct irq_data *p)
+{
+ gpmc_irq_endis(p->irq, false);
+}
+
+static void gpmc_irq_enable(struct irq_data *p)
+{
+ gpmc_irq_endis(p->irq, true);
+}
+
+static void gpmc_irq_noop(struct irq_data *data) { }
+
+static unsigned int gpmc_irq_noop_ret(struct irq_data *data) { return 0; }
+
+static int gpmc_setup_irq(void)
+{
+ int i;
+ u32 regval;
+
+ if (!gpmc_irq)
+ return -EINVAL;
+
+ gpmc_irq_start = irq_alloc_descs(-1, 0, GPMC_NR_IRQ, 0);
+ if (gpmc_irq_start < 0) {
+ pr_err("irq_alloc_descs failed\n");
+ return gpmc_irq_start;
+ }
+
+ gpmc_irq_chip.name = "gpmc";
+ gpmc_irq_chip.irq_startup = gpmc_irq_noop_ret;
+ gpmc_irq_chip.irq_enable = gpmc_irq_enable;
+ gpmc_irq_chip.irq_disable = gpmc_irq_disable;
+ gpmc_irq_chip.irq_shutdown = gpmc_irq_noop;
+ gpmc_irq_chip.irq_ack = gpmc_irq_noop;
+ gpmc_irq_chip.irq_mask = gpmc_irq_noop;
+ gpmc_irq_chip.irq_unmask = gpmc_irq_noop;
+
+ gpmc_client_irq[0].bitmask = GPMC_IRQ_FIFOEVENTENABLE;
+ gpmc_client_irq[1].bitmask = GPMC_IRQ_COUNT_EVENT;
+
+ for (i = 0; i < GPMC_NR_IRQ; i++) {
+ gpmc_client_irq[i].irq = gpmc_irq_start + i;
+ irq_set_chip_and_handler(gpmc_client_irq[i].irq,
+ &gpmc_irq_chip, handle_simple_irq);
+ set_irq_flags(gpmc_client_irq[i].irq,
+ IRQF_VALID | IRQF_NOAUTOEN);
+ }
+
+ /* Disable interrupts */
+ gpmc_write_reg(GPMC_IRQENABLE, 0);
+
+ /* clear interrupts */
+ regval = gpmc_read_reg(GPMC_IRQSTATUS);
+ gpmc_write_reg(GPMC_IRQSTATUS, regval);
+
+ return request_irq(gpmc_irq, gpmc_handle_irq, 0, "gpmc", NULL);
+}
+
+static int gpmc_free_irq(void)
+{
+ int i;
+
+ if (gpmc_irq)
+ free_irq(gpmc_irq, NULL);
+
+ for (i = 0; i < GPMC_NR_IRQ; i++) {
+ irq_set_handler(gpmc_client_irq[i].irq, NULL);
+ irq_set_chip(gpmc_client_irq[i].irq, &no_irq_chip);
+ irq_modify_status(gpmc_client_irq[i].irq, 0, 0);
+ }
+
+ irq_free_descs(gpmc_irq_start, GPMC_NR_IRQ);
+
+ return 0;
+}
+
+static void gpmc_mem_exit(void)
+{
+ int cs;
+
+ for (cs = 0; cs < gpmc_cs_num; cs++) {
+ if (!gpmc_cs_mem_enabled(cs))
+ continue;
+ gpmc_cs_delete_mem(cs);
+ }
+
+}
+
+static void gpmc_mem_init(void)
+{
+ int cs;
+
+ /*
+ * The first 1MB of GPMC address space is typically mapped to
+ * the internal ROM. Never allocate the first page, to
+ * facilitate bug detection; even if we didn't boot from ROM.
+ */
+ gpmc_mem_root.start = SZ_1M;
+ gpmc_mem_root.end = GPMC_MEM_END;
+
+ /* Reserve all regions that has been set up by bootloader */
+ for (cs = 0; cs < gpmc_cs_num; cs++) {
+ u32 base, size;
+
+ if (!gpmc_cs_mem_enabled(cs))
+ continue;
+ gpmc_cs_get_memconf(cs, &base, &size);
+ if (gpmc_cs_insert_mem(cs, base, size)) {
+ pr_warn("%s: disabling cs %d mapped at 0x%x-0x%x\n",
+ __func__, cs, base, base + size);
+ gpmc_cs_disable_mem(cs);
+ }
+ }
+}
+
+static u32 gpmc_round_ps_to_sync_clk(u32 time_ps, u32 sync_clk)
+{
+ u32 temp;
+ int div;
+
+ div = gpmc_calc_divider(sync_clk);
+ temp = gpmc_ps_to_ticks(time_ps);
+ temp = (temp + div - 1) / div;
+ return gpmc_ticks_to_ps(temp * div);
+}
+
+/* XXX: can the cycles be avoided ? */
+static int gpmc_calc_sync_read_timings(struct gpmc_timings *gpmc_t,
+ struct gpmc_device_timings *dev_t,
+ bool mux)
+{
+ u32 temp;
+
+ /* adv_rd_off */
+ temp = dev_t->t_avdp_r;
+ /* XXX: mux check required ? */
+ if (mux) {
+ /* XXX: t_avdp not to be required for sync, only added for tusb
+ * this indirectly necessitates requirement of t_avdp_r and
+ * t_avdp_w instead of having a single t_avdp
+ */
+ temp = max_t(u32, temp, gpmc_t->clk_activation + dev_t->t_avdh);
+ temp = max_t(u32, gpmc_t->adv_on + gpmc_ticks_to_ps(1), temp);
+ }
+ gpmc_t->adv_rd_off = gpmc_round_ps_to_ticks(temp);
+
+ /* oe_on */
+ temp = dev_t->t_oeasu; /* XXX: remove this ? */
+ if (mux) {
+ temp = max_t(u32, temp, gpmc_t->clk_activation + dev_t->t_ach);
+ temp = max_t(u32, temp, gpmc_t->adv_rd_off +
+ gpmc_ticks_to_ps(dev_t->cyc_aavdh_oe));
+ }
+ gpmc_t->oe_on = gpmc_round_ps_to_ticks(temp);
+
+ /* access */
+ /* XXX: any scope for improvement ?, by combining oe_on
+ * and clk_activation, need to check whether
+ * access = clk_activation + round to sync clk ?
+ */
+ temp = max_t(u32, dev_t->t_iaa, dev_t->cyc_iaa * gpmc_t->sync_clk);
+ temp += gpmc_t->clk_activation;
+ if (dev_t->cyc_oe)
+ temp = max_t(u32, temp, gpmc_t->oe_on +
+ gpmc_ticks_to_ps(dev_t->cyc_oe));
+ gpmc_t->access = gpmc_round_ps_to_ticks(temp);
+
+ gpmc_t->oe_off = gpmc_t->access + gpmc_ticks_to_ps(1);
+ gpmc_t->cs_rd_off = gpmc_t->oe_off;
+
+ /* rd_cycle */
+ temp = max_t(u32, dev_t->t_cez_r, dev_t->t_oez);
+ temp = gpmc_round_ps_to_sync_clk(temp, gpmc_t->sync_clk) +
+ gpmc_t->access;
+ /* XXX: barter t_ce_rdyz with t_cez_r ? */
+ if (dev_t->t_ce_rdyz)
+ temp = max_t(u32, temp, gpmc_t->cs_rd_off + dev_t->t_ce_rdyz);
+ gpmc_t->rd_cycle = gpmc_round_ps_to_ticks(temp);
+
+ return 0;
+}
+
+static int gpmc_calc_sync_write_timings(struct gpmc_timings *gpmc_t,
+ struct gpmc_device_timings *dev_t,
+ bool mux)
+{
+ u32 temp;
+
+ /* adv_wr_off */
+ temp = dev_t->t_avdp_w;
+ if (mux) {
+ temp = max_t(u32, temp,
+ gpmc_t->clk_activation + dev_t->t_avdh);
+ temp = max_t(u32, gpmc_t->adv_on + gpmc_ticks_to_ps(1), temp);
+ }
+ gpmc_t->adv_wr_off = gpmc_round_ps_to_ticks(temp);
+
+ /* wr_data_mux_bus */
+ temp = max_t(u32, dev_t->t_weasu,
+ gpmc_t->clk_activation + dev_t->t_rdyo);
+ /* XXX: shouldn't mux be kept as a whole for wr_data_mux_bus ?,
+ * and in that case remember to handle we_on properly
+ */
+ if (mux) {
+ temp = max_t(u32, temp,
+ gpmc_t->adv_wr_off + dev_t->t_aavdh);
+ temp = max_t(u32, temp, gpmc_t->adv_wr_off +
+ gpmc_ticks_to_ps(dev_t->cyc_aavdh_we));
+ }
+ gpmc_t->wr_data_mux_bus = gpmc_round_ps_to_ticks(temp);
+
+ /* we_on */
+ if (gpmc_capability & GPMC_HAS_WR_DATA_MUX_BUS)
+ gpmc_t->we_on = gpmc_round_ps_to_ticks(dev_t->t_weasu);
+ else
+ gpmc_t->we_on = gpmc_t->wr_data_mux_bus;
+
+ /* wr_access */
+ /* XXX: gpmc_capability check reqd ? , even if not, will not harm */
+ gpmc_t->wr_access = gpmc_t->access;
+
+ /* we_off */
+ temp = gpmc_t->we_on + dev_t->t_wpl;
+ temp = max_t(u32, temp,
+ gpmc_t->wr_access + gpmc_ticks_to_ps(1));
+ temp = max_t(u32, temp,
+ gpmc_t->we_on + gpmc_ticks_to_ps(dev_t->cyc_wpl));
+ gpmc_t->we_off = gpmc_round_ps_to_ticks(temp);
+
+ gpmc_t->cs_wr_off = gpmc_round_ps_to_ticks(gpmc_t->we_off +
+ dev_t->t_wph);
+
+ /* wr_cycle */
+ temp = gpmc_round_ps_to_sync_clk(dev_t->t_cez_w, gpmc_t->sync_clk);
+ temp += gpmc_t->wr_access;
+ /* XXX: barter t_ce_rdyz with t_cez_w ? */
+ if (dev_t->t_ce_rdyz)
+ temp = max_t(u32, temp,
+ gpmc_t->cs_wr_off + dev_t->t_ce_rdyz);
+ gpmc_t->wr_cycle = gpmc_round_ps_to_ticks(temp);
+
+ return 0;
+}
+
+static int gpmc_calc_async_read_timings(struct gpmc_timings *gpmc_t,
+ struct gpmc_device_timings *dev_t,
+ bool mux)
+{
+ u32 temp;
+
+ /* adv_rd_off */
+ temp = dev_t->t_avdp_r;
+ if (mux)
+ temp = max_t(u32, gpmc_t->adv_on + gpmc_ticks_to_ps(1), temp);
+ gpmc_t->adv_rd_off = gpmc_round_ps_to_ticks(temp);
+
+ /* oe_on */
+ temp = dev_t->t_oeasu;
+ if (mux)
+ temp = max_t(u32, temp,
+ gpmc_t->adv_rd_off + dev_t->t_aavdh);
+ gpmc_t->oe_on = gpmc_round_ps_to_ticks(temp);
+
+ /* access */
+ temp = max_t(u32, dev_t->t_iaa, /* XXX: remove t_iaa in async ? */
+ gpmc_t->oe_on + dev_t->t_oe);
+ temp = max_t(u32, temp,
+ gpmc_t->cs_on + dev_t->t_ce);
+ temp = max_t(u32, temp,
+ gpmc_t->adv_on + dev_t->t_aa);
+ gpmc_t->access = gpmc_round_ps_to_ticks(temp);
+
+ gpmc_t->oe_off = gpmc_t->access + gpmc_ticks_to_ps(1);
+ gpmc_t->cs_rd_off = gpmc_t->oe_off;
+
+ /* rd_cycle */
+ temp = max_t(u32, dev_t->t_rd_cycle,
+ gpmc_t->cs_rd_off + dev_t->t_cez_r);
+ temp = max_t(u32, temp, gpmc_t->oe_off + dev_t->t_oez);
+ gpmc_t->rd_cycle = gpmc_round_ps_to_ticks(temp);
+
+ return 0;
+}
+
+static int gpmc_calc_async_write_timings(struct gpmc_timings *gpmc_t,
+ struct gpmc_device_timings *dev_t,
+ bool mux)
+{
+ u32 temp;
+
+ /* adv_wr_off */
+ temp = dev_t->t_avdp_w;
+ if (mux)
+ temp = max_t(u32, gpmc_t->adv_on + gpmc_ticks_to_ps(1), temp);
+ gpmc_t->adv_wr_off = gpmc_round_ps_to_ticks(temp);
+
+ /* wr_data_mux_bus */
+ temp = dev_t->t_weasu;
+ if (mux) {
+ temp = max_t(u32, temp, gpmc_t->adv_wr_off + dev_t->t_aavdh);
+ temp = max_t(u32, temp, gpmc_t->adv_wr_off +
+ gpmc_ticks_to_ps(dev_t->cyc_aavdh_we));
+ }
+ gpmc_t->wr_data_mux_bus = gpmc_round_ps_to_ticks(temp);
+
+ /* we_on */
+ if (gpmc_capability & GPMC_HAS_WR_DATA_MUX_BUS)
+ gpmc_t->we_on = gpmc_round_ps_to_ticks(dev_t->t_weasu);
+ else
+ gpmc_t->we_on = gpmc_t->wr_data_mux_bus;
+
+ /* we_off */
+ temp = gpmc_t->we_on + dev_t->t_wpl;
+ gpmc_t->we_off = gpmc_round_ps_to_ticks(temp);
+
+ gpmc_t->cs_wr_off = gpmc_round_ps_to_ticks(gpmc_t->we_off +
+ dev_t->t_wph);
+
+ /* wr_cycle */
+ temp = max_t(u32, dev_t->t_wr_cycle,
+ gpmc_t->cs_wr_off + dev_t->t_cez_w);
+ gpmc_t->wr_cycle = gpmc_round_ps_to_ticks(temp);
+
+ return 0;
+}
+
+static int gpmc_calc_sync_common_timings(struct gpmc_timings *gpmc_t,
+ struct gpmc_device_timings *dev_t)
+{
+ u32 temp;
+
+ gpmc_t->sync_clk = gpmc_calc_divider(dev_t->clk) *
+ gpmc_get_fclk_period();
+
+ gpmc_t->page_burst_access = gpmc_round_ps_to_sync_clk(
+ dev_t->t_bacc,
+ gpmc_t->sync_clk);
+
+ temp = max_t(u32, dev_t->t_ces, dev_t->t_avds);
+ gpmc_t->clk_activation = gpmc_round_ps_to_ticks(temp);
+
+ if (gpmc_calc_divider(gpmc_t->sync_clk) != 1)
+ return 0;
+
+ if (dev_t->ce_xdelay)
+ gpmc_t->bool_timings.cs_extra_delay = true;
+ if (dev_t->avd_xdelay)
+ gpmc_t->bool_timings.adv_extra_delay = true;
+ if (dev_t->oe_xdelay)
+ gpmc_t->bool_timings.oe_extra_delay = true;
+ if (dev_t->we_xdelay)
+ gpmc_t->bool_timings.we_extra_delay = true;
+
+ return 0;
+}
+
+static int gpmc_calc_common_timings(struct gpmc_timings *gpmc_t,
+ struct gpmc_device_timings *dev_t,
+ bool sync)
+{
+ u32 temp;
+
+ /* cs_on */
+ gpmc_t->cs_on = gpmc_round_ps_to_ticks(dev_t->t_ceasu);
+
+ /* adv_on */
+ temp = dev_t->t_avdasu;
+ if (dev_t->t_ce_avd)
+ temp = max_t(u32, temp,
+ gpmc_t->cs_on + dev_t->t_ce_avd);
+ gpmc_t->adv_on = gpmc_round_ps_to_ticks(temp);
+
+ if (sync)
+ gpmc_calc_sync_common_timings(gpmc_t, dev_t);
+
+ return 0;
+}
+
+/* TODO: remove this function once all peripherals are confirmed to
+ * work with generic timing. Simultaneously gpmc_cs_set_timings()
+ * has to be modified to handle timings in ps instead of ns
+*/
+static void gpmc_convert_ps_to_ns(struct gpmc_timings *t)
+{
+ t->cs_on /= 1000;
+ t->cs_rd_off /= 1000;
+ t->cs_wr_off /= 1000;
+ t->adv_on /= 1000;
+ t->adv_rd_off /= 1000;
+ t->adv_wr_off /= 1000;
+ t->we_on /= 1000;
+ t->we_off /= 1000;
+ t->oe_on /= 1000;
+ t->oe_off /= 1000;
+ t->page_burst_access /= 1000;
+ t->access /= 1000;
+ t->rd_cycle /= 1000;
+ t->wr_cycle /= 1000;
+ t->bus_turnaround /= 1000;
+ t->cycle2cycle_delay /= 1000;
+ t->wait_monitoring /= 1000;
+ t->clk_activation /= 1000;
+ t->wr_access /= 1000;
+ t->wr_data_mux_bus /= 1000;
+}
+
+int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
+ struct gpmc_settings *gpmc_s,
+ struct gpmc_device_timings *dev_t)
+{
+ bool mux = false, sync = false;
+
+ if (gpmc_s) {
+ mux = gpmc_s->mux_add_data ? true : false;
+ sync = (gpmc_s->sync_read || gpmc_s->sync_write);
+ }
+
+ memset(gpmc_t, 0, sizeof(*gpmc_t));
+
+ gpmc_calc_common_timings(gpmc_t, dev_t, sync);
+
+ if (gpmc_s && gpmc_s->sync_read)
+ gpmc_calc_sync_read_timings(gpmc_t, dev_t, mux);
+ else
+ gpmc_calc_async_read_timings(gpmc_t, dev_t, mux);
+
+ if (gpmc_s && gpmc_s->sync_write)
+ gpmc_calc_sync_write_timings(gpmc_t, dev_t, mux);
+ else
+ gpmc_calc_async_write_timings(gpmc_t, dev_t, mux);
+
+ /* TODO: remove, see function definition */
+ gpmc_convert_ps_to_ns(gpmc_t);
+
+ return 0;
+}
+
+/**
+ * gpmc_cs_program_settings - programs non-timing related settings
+ * @cs: GPMC chip-select to program
+ * @p: pointer to GPMC settings structure
+ *
+ * Programs non-timing related settings for a GPMC chip-select, such as
+ * bus-width, burst configuration, etc. Function should be called once
+ * for each chip-select that is being used and must be called before
+ * calling gpmc_cs_set_timings() as timing parameters in the CONFIG1
+ * register will be initialised to zero by this function. Returns 0 on
+ * success and appropriate negative error code on failure.
+ */
+int gpmc_cs_program_settings(int cs, struct gpmc_settings *p)
+{
+ u32 config1;
+
+ if ((!p->device_width) || (p->device_width > GPMC_DEVWIDTH_16BIT)) {
+ pr_err("%s: invalid width %d!", __func__, p->device_width);
+ return -EINVAL;
+ }
+
+ /* Address-data multiplexing not supported for NAND devices */
+ if (p->device_nand && p->mux_add_data) {
+ pr_err("%s: invalid configuration!\n", __func__);
+ return -EINVAL;
+ }
+
+ if ((p->mux_add_data > GPMC_MUX_AD) ||
+ ((p->mux_add_data == GPMC_MUX_AAD) &&
+ !(gpmc_capability & GPMC_HAS_MUX_AAD))) {
+ pr_err("%s: invalid multiplex configuration!\n", __func__);
+ return -EINVAL;
+ }
+
+ /* Page/burst mode supports lengths of 4, 8 and 16 bytes */
+ if (p->burst_read || p->burst_write) {
+ switch (p->burst_len) {
+ case GPMC_BURST_4:
+ case GPMC_BURST_8:
+ case GPMC_BURST_16:
+ break;
+ default:
+ pr_err("%s: invalid page/burst-length (%d)\n",
+ __func__, p->burst_len);
+ return -EINVAL;
+ }
+ }
+
+ if (p->wait_pin > gpmc_nr_waitpins) {
+ pr_err("%s: invalid wait-pin (%d)\n", __func__, p->wait_pin);
+ return -EINVAL;
+ }
+
+ config1 = GPMC_CONFIG1_DEVICESIZE((p->device_width - 1));
+
+ if (p->sync_read)
+ config1 |= GPMC_CONFIG1_READTYPE_SYNC;
+ if (p->sync_write)
+ config1 |= GPMC_CONFIG1_WRITETYPE_SYNC;
+ if (p->wait_on_read)
+ config1 |= GPMC_CONFIG1_WAIT_READ_MON;
+ if (p->wait_on_write)
+ config1 |= GPMC_CONFIG1_WAIT_WRITE_MON;
+ if (p->wait_on_read || p->wait_on_write)
+ config1 |= GPMC_CONFIG1_WAIT_PIN_SEL(p->wait_pin);
+ if (p->device_nand)
+ config1 |= GPMC_CONFIG1_DEVICETYPE(GPMC_DEVICETYPE_NAND);
+ if (p->mux_add_data)
+ config1 |= GPMC_CONFIG1_MUXTYPE(p->mux_add_data);
+ if (p->burst_read)
+ config1 |= GPMC_CONFIG1_READMULTIPLE_SUPP;
+ if (p->burst_write)
+ config1 |= GPMC_CONFIG1_WRITEMULTIPLE_SUPP;
+ if (p->burst_read || p->burst_write) {
+ config1 |= GPMC_CONFIG1_PAGE_LEN(p->burst_len >> 3);
+ config1 |= p->burst_wrap ? GPMC_CONFIG1_WRAPBURST_SUPP : 0;
+ }
+
+ gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, config1);
+
+ return 0;
+}
+
+#ifdef CONFIG_OF
+static const struct of_device_id gpmc_dt_ids[] = {
+ { .compatible = "ti,omap2420-gpmc" },
+ { .compatible = "ti,omap2430-gpmc" },
+ { .compatible = "ti,omap3430-gpmc" }, /* omap3430 & omap3630 */
+ { .compatible = "ti,omap4430-gpmc" }, /* omap4430 & omap4460 & omap543x */
+ { .compatible = "ti,am3352-gpmc" }, /* am335x devices */
+ { }
+};
+MODULE_DEVICE_TABLE(of, gpmc_dt_ids);
+
+/**
+ * gpmc_read_settings_dt - read gpmc settings from device-tree
+ * @np: pointer to device-tree node for a gpmc child device
+ * @p: pointer to gpmc settings structure
+ *
+ * Reads the GPMC settings for a GPMC child device from device-tree and
+ * stores them in the GPMC settings structure passed. The GPMC settings
+ * structure is initialised to zero by this function and so any
+ * previously stored settings will be cleared.
+ */
+void gpmc_read_settings_dt(struct device_node *np, struct gpmc_settings *p)
+{
+ memset(p, 0, sizeof(struct gpmc_settings));
+
+ p->sync_read = of_property_read_bool(np, "gpmc,sync-read");
+ p->sync_write = of_property_read_bool(np, "gpmc,sync-write");
+ of_property_read_u32(np, "gpmc,device-width", &p->device_width);
+ of_property_read_u32(np, "gpmc,mux-add-data", &p->mux_add_data);
+
+ if (!of_property_read_u32(np, "gpmc,burst-length", &p->burst_len)) {
+ p->burst_wrap = of_property_read_bool(np, "gpmc,burst-wrap");
+ p->burst_read = of_property_read_bool(np, "gpmc,burst-read");
+ p->burst_write = of_property_read_bool(np, "gpmc,burst-write");
+ if (!p->burst_read && !p->burst_write)
+ pr_warn("%s: page/burst-length set but not used!\n",
+ __func__);
+ }
+
+ if (!of_property_read_u32(np, "gpmc,wait-pin", &p->wait_pin)) {
+ p->wait_on_read = of_property_read_bool(np,
+ "gpmc,wait-on-read");
+ p->wait_on_write = of_property_read_bool(np,
+ "gpmc,wait-on-write");
+ if (!p->wait_on_read && !p->wait_on_write)
+ pr_debug("%s: rd/wr wait monitoring not enabled!\n",
+ __func__);
+ }
+}
+
+static void __maybe_unused gpmc_read_timings_dt(struct device_node *np,
+ struct gpmc_timings *gpmc_t)
+{
+ struct gpmc_bool_timings *p;
+
+ if (!np || !gpmc_t)
+ return;
+
+ memset(gpmc_t, 0, sizeof(*gpmc_t));
+
+ /* minimum clock period for syncronous mode */
+ of_property_read_u32(np, "gpmc,sync-clk-ps", &gpmc_t->sync_clk);
+
+ /* chip select timtings */
+ of_property_read_u32(np, "gpmc,cs-on-ns", &gpmc_t->cs_on);
+ of_property_read_u32(np, "gpmc,cs-rd-off-ns", &gpmc_t->cs_rd_off);
+ of_property_read_u32(np, "gpmc,cs-wr-off-ns", &gpmc_t->cs_wr_off);
+
+ /* ADV signal timings */
+ of_property_read_u32(np, "gpmc,adv-on-ns", &gpmc_t->adv_on);
+ of_property_read_u32(np, "gpmc,adv-rd-off-ns", &gpmc_t->adv_rd_off);
+ of_property_read_u32(np, "gpmc,adv-wr-off-ns", &gpmc_t->adv_wr_off);
+
+ /* WE signal timings */
+ of_property_read_u32(np, "gpmc,we-on-ns", &gpmc_t->we_on);
+ of_property_read_u32(np, "gpmc,we-off-ns", &gpmc_t->we_off);
+
+ /* OE signal timings */
+ of_property_read_u32(np, "gpmc,oe-on-ns", &gpmc_t->oe_on);
+ of_property_read_u32(np, "gpmc,oe-off-ns", &gpmc_t->oe_off);
+
+ /* access and cycle timings */
+ of_property_read_u32(np, "gpmc,page-burst-access-ns",
+ &gpmc_t->page_burst_access);
+ of_property_read_u32(np, "gpmc,access-ns", &gpmc_t->access);
+ of_property_read_u32(np, "gpmc,rd-cycle-ns", &gpmc_t->rd_cycle);
+ of_property_read_u32(np, "gpmc,wr-cycle-ns", &gpmc_t->wr_cycle);
+ of_property_read_u32(np, "gpmc,bus-turnaround-ns",
+ &gpmc_t->bus_turnaround);
+ of_property_read_u32(np, "gpmc,cycle2cycle-delay-ns",
+ &gpmc_t->cycle2cycle_delay);
+ of_property_read_u32(np, "gpmc,wait-monitoring-ns",
+ &gpmc_t->wait_monitoring);
+ of_property_read_u32(np, "gpmc,clk-activation-ns",
+ &gpmc_t->clk_activation);
+
+ /* only applicable to OMAP3+ */
+ of_property_read_u32(np, "gpmc,wr-access-ns", &gpmc_t->wr_access);
+ of_property_read_u32(np, "gpmc,wr-data-mux-bus-ns",
+ &gpmc_t->wr_data_mux_bus);
+
+ /* bool timing parameters */
+ p = &gpmc_t->bool_timings;
+
+ p->cycle2cyclediffcsen =
+ of_property_read_bool(np, "gpmc,cycle2cycle-diffcsen");
+ p->cycle2cyclesamecsen =
+ of_property_read_bool(np, "gpmc,cycle2cycle-samecsen");
+ p->we_extra_delay = of_property_read_bool(np, "gpmc,we-extra-delay");
+ p->oe_extra_delay = of_property_read_bool(np, "gpmc,oe-extra-delay");
+ p->adv_extra_delay = of_property_read_bool(np, "gpmc,adv-extra-delay");
+ p->cs_extra_delay = of_property_read_bool(np, "gpmc,cs-extra-delay");
+ p->time_para_granularity =
+ of_property_read_bool(np, "gpmc,time-para-granularity");
+}
+
+#if IS_ENABLED(CONFIG_MTD_NAND)
+
+static const char * const nand_xfer_types[] = {
+ [NAND_OMAP_PREFETCH_POLLED] = "prefetch-polled",
+ [NAND_OMAP_POLLED] = "polled",
+ [NAND_OMAP_PREFETCH_DMA] = "prefetch-dma",
+ [NAND_OMAP_PREFETCH_IRQ] = "prefetch-irq",
+};
+
+static int gpmc_probe_nand_child(struct platform_device *pdev,
+ struct device_node *child)
+{
+ u32 val;
+ const char *s;
+ struct gpmc_timings gpmc_t;
+ struct omap_nand_platform_data *gpmc_nand_data;
+
+ if (of_property_read_u32(child, "reg", &val) < 0) {
+ dev_err(&pdev->dev, "%s has no 'reg' property\n",
+ child->full_name);
+ return -ENODEV;
+ }
+
+ gpmc_nand_data = devm_kzalloc(&pdev->dev, sizeof(*gpmc_nand_data),
+ GFP_KERNEL);
+ if (!gpmc_nand_data)
+ return -ENOMEM;
+
+ gpmc_nand_data->cs = val;
+ gpmc_nand_data->of_node = child;
+
+ /* Detect availability of ELM module */
+ gpmc_nand_data->elm_of_node = of_parse_phandle(child, "ti,elm-id", 0);
+ if (gpmc_nand_data->elm_of_node == NULL)
+ gpmc_nand_data->elm_of_node =
+ of_parse_phandle(child, "elm_id", 0);
+
+ /* select ecc-scheme for NAND */
+ if (of_property_read_string(child, "ti,nand-ecc-opt", &s)) {
+ pr_err("%s: ti,nand-ecc-opt not found\n", __func__);
+ return -ENODEV;
+ }
+
+ if (!strcmp(s, "sw"))
+ gpmc_nand_data->ecc_opt = OMAP_ECC_HAM1_CODE_SW;
+ else if (!strcmp(s, "ham1") ||
+ !strcmp(s, "hw") || !strcmp(s, "hw-romcode"))
+ gpmc_nand_data->ecc_opt =
+ OMAP_ECC_HAM1_CODE_HW;
+ else if (!strcmp(s, "bch4"))
+ if (gpmc_nand_data->elm_of_node)
+ gpmc_nand_data->ecc_opt =
+ OMAP_ECC_BCH4_CODE_HW;
+ else
+ gpmc_nand_data->ecc_opt =
+ OMAP_ECC_BCH4_CODE_HW_DETECTION_SW;
+ else if (!strcmp(s, "bch8"))
+ if (gpmc_nand_data->elm_of_node)
+ gpmc_nand_data->ecc_opt =
+ OMAP_ECC_BCH8_CODE_HW;
+ else
+ gpmc_nand_data->ecc_opt =
+ OMAP_ECC_BCH8_CODE_HW_DETECTION_SW;
+ else if (!strcmp(s, "bch16"))
+ if (gpmc_nand_data->elm_of_node)
+ gpmc_nand_data->ecc_opt =
+ OMAP_ECC_BCH16_CODE_HW;
+ else
+ pr_err("%s: BCH16 requires ELM support\n", __func__);
+ else
+ pr_err("%s: ti,nand-ecc-opt invalid value\n", __func__);
+
+ /* select data transfer mode for NAND controller */
+ if (!of_property_read_string(child, "ti,nand-xfer-type", &s))
+ for (val = 0; val < ARRAY_SIZE(nand_xfer_types); val++)
+ if (!strcasecmp(s, nand_xfer_types[val])) {
+ gpmc_nand_data->xfer_type = val;
+ break;
+ }
+
+ gpmc_nand_data->flash_bbt = of_get_nand_on_flash_bbt(child);
+
+ val = of_get_nand_bus_width(child);
+ if (val == 16)
+ gpmc_nand_data->devsize = NAND_BUSWIDTH_16;
+
+ gpmc_read_timings_dt(child, &gpmc_t);
+ gpmc_nand_init(gpmc_nand_data, &gpmc_t);
+
+ return 0;
+}
+#else
+static int gpmc_probe_nand_child(struct platform_device *pdev,
+ struct device_node *child)
+{
+ return 0;
+}
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_ONENAND)
+static int gpmc_probe_onenand_child(struct platform_device *pdev,
+ struct device_node *child)
+{
+ u32 val;
+ struct omap_onenand_platform_data *gpmc_onenand_data;
+
+ if (of_property_read_u32(child, "reg", &val) < 0) {
+ dev_err(&pdev->dev, "%s has no 'reg' property\n",
+ child->full_name);
+ return -ENODEV;
+ }
+
+ gpmc_onenand_data = devm_kzalloc(&pdev->dev, sizeof(*gpmc_onenand_data),
+ GFP_KERNEL);
+ if (!gpmc_onenand_data)
+ return -ENOMEM;
+
+ gpmc_onenand_data->cs = val;
+ gpmc_onenand_data->of_node = child;
+ gpmc_onenand_data->dma_channel = -1;
+
+ if (!of_property_read_u32(child, "dma-channel", &val))
+ gpmc_onenand_data->dma_channel = val;
+
+ gpmc_onenand_init(gpmc_onenand_data);
+
+ return 0;
+}
+#else
+static int gpmc_probe_onenand_child(struct platform_device *pdev,
+ struct device_node *child)
+{
+ return 0;
+}
+#endif
+
+/**
+ * gpmc_probe_generic_child - configures the gpmc for a child device
+ * @pdev: pointer to gpmc platform device
+ * @child: pointer to device-tree node for child device
+ *
+ * Allocates and configures a GPMC chip-select for a child device.
+ * Returns 0 on success and appropriate negative error code on failure.
+ */
+static int gpmc_probe_generic_child(struct platform_device *pdev,
+ struct device_node *child)
+{
+ struct gpmc_settings gpmc_s;
+ struct gpmc_timings gpmc_t;
+ struct resource res;
+ unsigned long base;
+ const char *name;
+ int ret, cs;
+ u32 val;
+
+ if (of_property_read_u32(child, "reg", &cs) < 0) {
+ dev_err(&pdev->dev, "%s has no 'reg' property\n",
+ child->full_name);
+ return -ENODEV;
+ }
+
+ if (of_address_to_resource(child, 0, &res) < 0) {
+ dev_err(&pdev->dev, "%s has malformed 'reg' property\n",
+ child->full_name);
+ return -ENODEV;
+ }
+
+ /*
+ * Check if we have multiple instances of the same device
+ * on a single chip select. If so, use the already initialized
+ * timings.
+ */
+ name = gpmc_cs_get_name(cs);
+ if (name && child->name && of_node_cmp(child->name, name) == 0)
+ goto no_timings;
+
+ ret = gpmc_cs_request(cs, resource_size(&res), &base);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "cannot request GPMC CS %d\n", cs);
+ return ret;
+ }
+ gpmc_cs_set_name(cs, child->name);
+
+ gpmc_read_settings_dt(child, &gpmc_s);
+ gpmc_read_timings_dt(child, &gpmc_t);
+
+ /*
+ * For some GPMC devices we still need to rely on the bootloader
+ * timings because the devices can be connected via FPGA.
+ * REVISIT: Add timing support from slls644g.pdf.
+ */
+ if (!gpmc_t.cs_rd_off) {
+ WARN(1, "enable GPMC debug to configure .dts timings for CS%i\n",
+ cs);
+ gpmc_cs_show_timings(cs,
+ "please add GPMC bootloader timings to .dts");
+ goto no_timings;
+ }
+
+ /* CS must be disabled while making changes to gpmc configuration */
+ gpmc_cs_disable_mem(cs);
+
+ /*
+ * FIXME: gpmc_cs_request() will map the CS to an arbitary
+ * location in the gpmc address space. When booting with
+ * device-tree we want the NOR flash to be mapped to the
+ * location specified in the device-tree blob. So remap the
+ * CS to this location. Once DT migration is complete should
+ * just make gpmc_cs_request() map a specific address.
+ */
+ ret = gpmc_cs_remap(cs, res.start);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "cannot remap GPMC CS %d to %pa\n",
+ cs, &res.start);
+ goto err;
+ }
+
+ ret = of_property_read_u32(child, "bank-width", &gpmc_s.device_width);
+ if (ret < 0)
+ goto err;
+
+ ret = gpmc_cs_program_settings(cs, &gpmc_s);
+ if (ret < 0)
+ goto err;
+
+ ret = gpmc_cs_set_timings(cs, &gpmc_t);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to set gpmc timings for: %s\n",
+ child->name);
+ goto err;
+ }
+
+ /* Clear limited address i.e. enable A26-A11 */
+ val = gpmc_read_reg(GPMC_CONFIG);
+ val &= ~GPMC_CONFIG_LIMITEDADDRESS;
+ gpmc_write_reg(GPMC_CONFIG, val);
+
+ /* Enable CS region */
+ gpmc_cs_enable_mem(cs);
+
+no_timings:
+ if (of_platform_device_create(child, NULL, &pdev->dev))
+ return 0;
+
+ dev_err(&pdev->dev, "failed to create gpmc child %s\n", child->name);
+ ret = -ENODEV;
+
+err:
+ gpmc_cs_free(cs);
+
+ return ret;
+}
+
+static int gpmc_probe_dt(struct platform_device *pdev)
+{
+ int ret;
+ struct device_node *child;
+ const struct of_device_id *of_id =
+ of_match_device(gpmc_dt_ids, &pdev->dev);
+
+ if (!of_id)
+ return 0;
+
+ ret = of_property_read_u32(pdev->dev.of_node, "gpmc,num-cs",
+ &gpmc_cs_num);
+ if (ret < 0) {
+ pr_err("%s: number of chip-selects not defined\n", __func__);
+ return ret;
+ } else if (gpmc_cs_num < 1) {
+ pr_err("%s: all chip-selects are disabled\n", __func__);
+ return -EINVAL;
+ } else if (gpmc_cs_num > GPMC_CS_NUM) {
+ pr_err("%s: number of supported chip-selects cannot be > %d\n",
+ __func__, GPMC_CS_NUM);
+ return -EINVAL;
+ }
+
+ ret = of_property_read_u32(pdev->dev.of_node, "gpmc,num-waitpins",
+ &gpmc_nr_waitpins);
+ if (ret < 0) {
+ pr_err("%s: number of wait pins not found!\n", __func__);
+ return ret;
+ }
+
+ for_each_available_child_of_node(pdev->dev.of_node, child) {
+
+ if (!child->name)
+ continue;
+
+ if (of_node_cmp(child->name, "nand") == 0)
+ ret = gpmc_probe_nand_child(pdev, child);
+ else if (of_node_cmp(child->name, "onenand") == 0)
+ ret = gpmc_probe_onenand_child(pdev, child);
+ else if (of_node_cmp(child->name, "ethernet") == 0 ||
+ of_node_cmp(child->name, "nor") == 0 ||
+ of_node_cmp(child->name, "uart") == 0)
+ ret = gpmc_probe_generic_child(pdev, child);
+
+ if (WARN(ret < 0, "%s: probing gpmc child %s failed\n",
+ __func__, child->full_name))
+ of_node_put(child);
+ }
+
+ return 0;
+}
+#else
+static int gpmc_probe_dt(struct platform_device *pdev)
+{
+ return 0;
+}
+#endif
+
+static int gpmc_probe(struct platform_device *pdev)
+{
+ int rc;
+ u32 l;
+ struct resource *res;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res == NULL)
+ return -ENOENT;
+
+ phys_base = res->start;
+ mem_size = resource_size(res);
+
+ gpmc_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(gpmc_base))
+ return PTR_ERR(gpmc_base);
+
+ res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (res == NULL)
+ dev_warn(&pdev->dev, "Failed to get resource: irq\n");
+ else
+ gpmc_irq = res->start;
+
+ gpmc_l3_clk = devm_clk_get(&pdev->dev, "fck");
+ if (IS_ERR(gpmc_l3_clk)) {
+ dev_err(&pdev->dev, "Failed to get GPMC fck\n");
+ gpmc_irq = 0;
+ return PTR_ERR(gpmc_l3_clk);
+ }
+
+ if (!clk_get_rate(gpmc_l3_clk)) {
+ dev_err(&pdev->dev, "Invalid GPMC fck clock rate\n");
+ return -EINVAL;
+ }
+
+ pm_runtime_enable(&pdev->dev);
+ pm_runtime_get_sync(&pdev->dev);
+
+ gpmc_dev = &pdev->dev;
+
+ l = gpmc_read_reg(GPMC_REVISION);
+
+ /*
+ * FIXME: Once device-tree migration is complete the below flags
+ * should be populated based upon the device-tree compatible
+ * string. For now just use the IP revision. OMAP3+ devices have
+ * the wr_access and wr_data_mux_bus register fields. OMAP4+
+ * devices support the addr-addr-data multiplex protocol.
+ *
+ * GPMC IP revisions:
+ * - OMAP24xx = 2.0
+ * - OMAP3xxx = 5.0
+ * - OMAP44xx/54xx/AM335x = 6.0
+ */
+ if (GPMC_REVISION_MAJOR(l) > 0x4)
+ gpmc_capability = GPMC_HAS_WR_ACCESS | GPMC_HAS_WR_DATA_MUX_BUS;
+ if (GPMC_REVISION_MAJOR(l) > 0x5)
+ gpmc_capability |= GPMC_HAS_MUX_AAD;
+ dev_info(gpmc_dev, "GPMC revision %d.%d\n", GPMC_REVISION_MAJOR(l),
+ GPMC_REVISION_MINOR(l));
+
+ gpmc_mem_init();
+
+ if (gpmc_setup_irq() < 0)
+ dev_warn(gpmc_dev, "gpmc_setup_irq failed\n");
+
+ if (!pdev->dev.of_node) {
+ gpmc_cs_num = GPMC_CS_NUM;
+ gpmc_nr_waitpins = GPMC_NR_WAITPINS;
+ }
+
+ rc = gpmc_probe_dt(pdev);
+ if (rc < 0) {
+ pm_runtime_put_sync(&pdev->dev);
+ dev_err(gpmc_dev, "failed to probe DT parameters\n");
+ return rc;
+ }
+
+ return 0;
+}
+
+static int gpmc_remove(struct platform_device *pdev)
+{
+ gpmc_free_irq();
+ gpmc_mem_exit();
+ pm_runtime_put_sync(&pdev->dev);
+ pm_runtime_disable(&pdev->dev);
+ gpmc_dev = NULL;
+ return 0;
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int gpmc_suspend(struct device *dev)
+{
+ omap3_gpmc_save_context();
+ pm_runtime_put_sync(dev);
+ return 0;
+}
+
+static int gpmc_resume(struct device *dev)
+{
+ pm_runtime_get_sync(dev);
+ omap3_gpmc_restore_context();
+ return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(gpmc_pm_ops, gpmc_suspend, gpmc_resume);
+
+static struct platform_driver gpmc_driver = {
+ .probe = gpmc_probe,
+ .remove = gpmc_remove,
+ .driver = {
+ .name = DEVICE_NAME,
+ .owner = THIS_MODULE,
+ .of_match_table = of_match_ptr(gpmc_dt_ids),
+ .pm = &gpmc_pm_ops,
+ },
+};
+
+static __init int gpmc_init(void)
+{
+ return platform_driver_register(&gpmc_driver);
+}
+
+static __exit void gpmc_exit(void)
+{
+ platform_driver_unregister(&gpmc_driver);
+
+}
+
+postcore_initcall(gpmc_init);
+module_exit(gpmc_exit);
+
+static irqreturn_t gpmc_handle_irq(int irq, void *dev)
+{
+ int i;
+ u32 regval;
+
+ regval = gpmc_read_reg(GPMC_IRQSTATUS);
+
+ if (!regval)
+ return IRQ_NONE;
+
+ for (i = 0; i < GPMC_NR_IRQ; i++)
+ if (regval & gpmc_client_irq[i].bitmask)
+ generic_handle_irq(gpmc_client_irq[i].irq);
+
+ gpmc_write_reg(GPMC_IRQSTATUS, regval);
+
+ return IRQ_HANDLED;
+}
+
+static struct omap3_gpmc_regs gpmc_context;
+
+void omap3_gpmc_save_context(void)
+{
+ int i;
+
+ gpmc_context.sysconfig = gpmc_read_reg(GPMC_SYSCONFIG);
+ gpmc_context.irqenable = gpmc_read_reg(GPMC_IRQENABLE);
+ gpmc_context.timeout_ctrl = gpmc_read_reg(GPMC_TIMEOUT_CONTROL);
+ gpmc_context.config = gpmc_read_reg(GPMC_CONFIG);
+ gpmc_context.prefetch_config1 = gpmc_read_reg(GPMC_PREFETCH_CONFIG1);
+ gpmc_context.prefetch_config2 = gpmc_read_reg(GPMC_PREFETCH_CONFIG2);
+ gpmc_context.prefetch_control = gpmc_read_reg(GPMC_PREFETCH_CONTROL);
+ for (i = 0; i < gpmc_cs_num; i++) {
+ gpmc_context.cs_context[i].is_valid = gpmc_cs_mem_enabled(i);
+ if (gpmc_context.cs_context[i].is_valid) {
+ gpmc_context.cs_context[i].config1 =
+ gpmc_cs_read_reg(i, GPMC_CS_CONFIG1);
+ gpmc_context.cs_context[i].config2 =
+ gpmc_cs_read_reg(i, GPMC_CS_CONFIG2);
+ gpmc_context.cs_context[i].config3 =
+ gpmc_cs_read_reg(i, GPMC_CS_CONFIG3);
+ gpmc_context.cs_context[i].config4 =
+ gpmc_cs_read_reg(i, GPMC_CS_CONFIG4);
+ gpmc_context.cs_context[i].config5 =
+ gpmc_cs_read_reg(i, GPMC_CS_CONFIG5);
+ gpmc_context.cs_context[i].config6 =
+ gpmc_cs_read_reg(i, GPMC_CS_CONFIG6);
+ gpmc_context.cs_context[i].config7 =
+ gpmc_cs_read_reg(i, GPMC_CS_CONFIG7);
+ }
+ }
+}
+
+void omap3_gpmc_restore_context(void)
+{
+ int i;
+
+ gpmc_write_reg(GPMC_SYSCONFIG, gpmc_context.sysconfig);
+ gpmc_write_reg(GPMC_IRQENABLE, gpmc_context.irqenable);
+ gpmc_write_reg(GPMC_TIMEOUT_CONTROL, gpmc_context.timeout_ctrl);
+ gpmc_write_reg(GPMC_CONFIG, gpmc_context.config);
+ gpmc_write_reg(GPMC_PREFETCH_CONFIG1, gpmc_context.prefetch_config1);
+ gpmc_write_reg(GPMC_PREFETCH_CONFIG2, gpmc_context.prefetch_config2);
+ gpmc_write_reg(GPMC_PREFETCH_CONTROL, gpmc_context.prefetch_control);
+ for (i = 0; i < gpmc_cs_num; i++) {
+ if (gpmc_context.cs_context[i].is_valid) {
+ gpmc_cs_write_reg(i, GPMC_CS_CONFIG1,
+ gpmc_context.cs_context[i].config1);
+ gpmc_cs_write_reg(i, GPMC_CS_CONFIG2,
+ gpmc_context.cs_context[i].config2);
+ gpmc_cs_write_reg(i, GPMC_CS_CONFIG3,
+ gpmc_context.cs_context[i].config3);
+ gpmc_cs_write_reg(i, GPMC_CS_CONFIG4,
+ gpmc_context.cs_context[i].config4);
+ gpmc_cs_write_reg(i, GPMC_CS_CONFIG5,
+ gpmc_context.cs_context[i].config5);
+ gpmc_cs_write_reg(i, GPMC_CS_CONFIG6,
+ gpmc_context.cs_context[i].config6);
+ gpmc_cs_write_reg(i, GPMC_CS_CONFIG7,
+ gpmc_context.cs_context[i].config7);
+ }
+ }
+}
--- /dev/null
+config TEGRA_MC
+ bool "NVIDIA Tegra Memory Controller support"
+ default y
+ depends on ARCH_TEGRA
+ help
+ This driver supports the Memory Controller (MC) hardware found on
+ NVIDIA Tegra SoCs.
--- /dev/null
+tegra-mc-y := mc.o
+
+tegra-mc-$(CONFIG_ARCH_TEGRA_3x_SOC) += tegra30.o
+tegra-mc-$(CONFIG_ARCH_TEGRA_114_SOC) += tegra114.o
+tegra-mc-$(CONFIG_ARCH_TEGRA_124_SOC) += tegra124.o
+
+obj-$(CONFIG_TEGRA_MC) += tegra-mc.o
--- /dev/null
+/*
+ * Copyright (C) 2014 NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+#include "mc.h"
+
+#define MC_INTSTATUS 0x000
+#define MC_INT_DECERR_MTS (1 << 16)
+#define MC_INT_SECERR_SEC (1 << 13)
+#define MC_INT_DECERR_VPR (1 << 12)
+#define MC_INT_INVALID_APB_ASID_UPDATE (1 << 11)
+#define MC_INT_INVALID_SMMU_PAGE (1 << 10)
+#define MC_INT_ARBITRATION_EMEM (1 << 9)
+#define MC_INT_SECURITY_VIOLATION (1 << 8)
+#define MC_INT_DECERR_EMEM (1 << 6)
+
+#define MC_INTMASK 0x004
+
+#define MC_ERR_STATUS 0x08
+#define MC_ERR_STATUS_TYPE_SHIFT 28
+#define MC_ERR_STATUS_TYPE_INVALID_SMMU_PAGE (6 << MC_ERR_STATUS_TYPE_SHIFT)
+#define MC_ERR_STATUS_TYPE_MASK (0x7 << MC_ERR_STATUS_TYPE_SHIFT)
+#define MC_ERR_STATUS_READABLE (1 << 27)
+#define MC_ERR_STATUS_WRITABLE (1 << 26)
+#define MC_ERR_STATUS_NONSECURE (1 << 25)
+#define MC_ERR_STATUS_ADR_HI_SHIFT 20
+#define MC_ERR_STATUS_ADR_HI_MASK 0x3
+#define MC_ERR_STATUS_SECURITY (1 << 17)
+#define MC_ERR_STATUS_RW (1 << 16)
+#define MC_ERR_STATUS_CLIENT_MASK 0x7f
+
+#define MC_ERR_ADR 0x0c
+
+#define MC_EMEM_ARB_CFG 0x90
+#define MC_EMEM_ARB_CFG_CYCLES_PER_UPDATE(x) (((x) & 0x1ff) << 0)
+#define MC_EMEM_ARB_CFG_CYCLES_PER_UPDATE_MASK 0x1ff
+#define MC_EMEM_ARB_MISC0 0xd8
+
+static const struct of_device_id tegra_mc_of_match[] = {
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+ { .compatible = "nvidia,tegra30-mc", .data = &tegra30_mc_soc },
+#endif
+#ifdef CONFIG_ARCH_TEGRA_114_SOC
+ { .compatible = "nvidia,tegra114-mc", .data = &tegra114_mc_soc },
+#endif
+#ifdef CONFIG_ARCH_TEGRA_124_SOC
+ { .compatible = "nvidia,tegra124-mc", .data = &tegra124_mc_soc },
+#endif
+ { }
+};
+MODULE_DEVICE_TABLE(of, tegra_mc_of_match);
+
+static int tegra_mc_setup_latency_allowance(struct tegra_mc *mc)
+{
+ unsigned long long tick;
+ unsigned int i;
+ u32 value;
+
+ /* compute the number of MC clock cycles per tick */
+ tick = mc->tick * clk_get_rate(mc->clk);
+ do_div(tick, NSEC_PER_SEC);
+
+ value = readl(mc->regs + MC_EMEM_ARB_CFG);
+ value &= ~MC_EMEM_ARB_CFG_CYCLES_PER_UPDATE_MASK;
+ value |= MC_EMEM_ARB_CFG_CYCLES_PER_UPDATE(tick);
+ writel(value, mc->regs + MC_EMEM_ARB_CFG);
+
+ /* write latency allowance defaults */
+ for (i = 0; i < mc->soc->num_clients; i++) {
+ const struct tegra_mc_la *la = &mc->soc->clients[i].la;
+ u32 value;
+
+ value = readl(mc->regs + la->reg);
+ value &= ~(la->mask << la->shift);
+ value |= (la->def & la->mask) << la->shift;
+ writel(value, mc->regs + la->reg);
+ }
+
+ return 0;
+}
+
+static const char *const status_names[32] = {
+ [ 1] = "External interrupt",
+ [ 6] = "EMEM address decode error",
+ [ 8] = "Security violation",
+ [ 9] = "EMEM arbitration error",
+ [10] = "Page fault",
+ [11] = "Invalid APB ASID update",
+ [12] = "VPR violation",
+ [13] = "Secure carveout violation",
+ [16] = "MTS carveout violation",
+};
+
+static const char *const error_names[8] = {
+ [2] = "EMEM decode error",
+ [3] = "TrustZone violation",
+ [4] = "Carveout violation",
+ [6] = "SMMU translation error",
+};
+
+static irqreturn_t tegra_mc_irq(int irq, void *data)
+{
+ struct tegra_mc *mc = data;
+ unsigned long status, mask;
+ unsigned int bit;
+
+ /* mask all interrupts to avoid flooding */
+ status = mc_readl(mc, MC_INTSTATUS);
+ mask = mc_readl(mc, MC_INTMASK);
+
+ for_each_set_bit(bit, &status, 32) {
+ const char *error = status_names[bit] ?: "unknown";
+ const char *client = "unknown", *desc;
+ const char *direction, *secure;
+ phys_addr_t addr = 0;
+ unsigned int i;
+ char perm[7];
+ u8 id, type;
+ u32 value;
+
+ value = mc_readl(mc, MC_ERR_STATUS);
+
+#ifdef CONFIG_PHYS_ADDR_T_64BIT
+ if (mc->soc->num_address_bits > 32) {
+ addr = ((value >> MC_ERR_STATUS_ADR_HI_SHIFT) &
+ MC_ERR_STATUS_ADR_HI_MASK);
+ addr <<= 32;
+ }
+#endif
+
+ if (value & MC_ERR_STATUS_RW)
+ direction = "write";
+ else
+ direction = "read";
+
+ if (value & MC_ERR_STATUS_SECURITY)
+ secure = "secure ";
+ else
+ secure = "";
+
+ id = value & MC_ERR_STATUS_CLIENT_MASK;
+
+ for (i = 0; i < mc->soc->num_clients; i++) {
+ if (mc->soc->clients[i].id == id) {
+ client = mc->soc->clients[i].name;
+ break;
+ }
+ }
+
+ type = (value & MC_ERR_STATUS_TYPE_MASK) >>
+ MC_ERR_STATUS_TYPE_SHIFT;
+ desc = error_names[type];
+
+ switch (value & MC_ERR_STATUS_TYPE_MASK) {
+ case MC_ERR_STATUS_TYPE_INVALID_SMMU_PAGE:
+ perm[0] = ' ';
+ perm[1] = '[';
+
+ if (value & MC_ERR_STATUS_READABLE)
+ perm[2] = 'R';
+ else
+ perm[2] = '-';
+
+ if (value & MC_ERR_STATUS_WRITABLE)
+ perm[3] = 'W';
+ else
+ perm[3] = '-';
+
+ if (value & MC_ERR_STATUS_NONSECURE)
+ perm[4] = '-';
+ else
+ perm[4] = 'S';
+
+ perm[5] = ']';
+ perm[6] = '\0';
+ break;
+
+ default:
+ perm[0] = '\0';
+ break;
+ }
+
+ value = mc_readl(mc, MC_ERR_ADR);
+ addr |= value;
+
+ dev_err_ratelimited(mc->dev, "%s: %s%s @%pa: %s (%s%s)\n",
+ client, secure, direction, &addr, error,
+ desc, perm);
+ }
+
+ /* clear interrupts */
+ mc_writel(mc, status, MC_INTSTATUS);
+
+ return IRQ_HANDLED;
+}
+
+static int tegra_mc_probe(struct platform_device *pdev)
+{
+ const struct of_device_id *match;
+ struct resource *res;
+ struct tegra_mc *mc;
+ u32 value;
+ int err;
+
+ match = of_match_node(tegra_mc_of_match, pdev->dev.of_node);
+ if (!match)
+ return -ENODEV;
+
+ mc = devm_kzalloc(&pdev->dev, sizeof(*mc), GFP_KERNEL);
+ if (!mc)
+ return -ENOMEM;
+
+ platform_set_drvdata(pdev, mc);
+ mc->soc = match->data;
+ mc->dev = &pdev->dev;
+
+ /* length of MC tick in nanoseconds */
+ mc->tick = 30;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ mc->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(mc->regs))
+ return PTR_ERR(mc->regs);
+
+ mc->clk = devm_clk_get(&pdev->dev, "mc");
+ if (IS_ERR(mc->clk)) {
+ dev_err(&pdev->dev, "failed to get MC clock: %ld\n",
+ PTR_ERR(mc->clk));
+ return PTR_ERR(mc->clk);
+ }
+
+ err = tegra_mc_setup_latency_allowance(mc);
+ if (err < 0) {
+ dev_err(&pdev->dev, "failed to setup latency allowance: %d\n",
+ err);
+ return err;
+ }
+
+ if (IS_ENABLED(CONFIG_TEGRA_IOMMU_SMMU)) {
+ mc->smmu = tegra_smmu_probe(&pdev->dev, mc->soc->smmu, mc);
+ if (IS_ERR(mc->smmu)) {
+ dev_err(&pdev->dev, "failed to probe SMMU: %ld\n",
+ PTR_ERR(mc->smmu));
+ return PTR_ERR(mc->smmu);
+ }
+ }
+
+ mc->irq = platform_get_irq(pdev, 0);
+ if (mc->irq < 0) {
+ dev_err(&pdev->dev, "interrupt not specified\n");
+ return mc->irq;
+ }
+
+ err = devm_request_irq(&pdev->dev, mc->irq, tegra_mc_irq, IRQF_SHARED,
+ dev_name(&pdev->dev), mc);
+ if (err < 0) {
+ dev_err(&pdev->dev, "failed to request IRQ#%u: %d\n", mc->irq,
+ err);
+ return err;
+ }
+
+ value = MC_INT_DECERR_MTS | MC_INT_SECERR_SEC | MC_INT_DECERR_VPR |
+ MC_INT_INVALID_APB_ASID_UPDATE | MC_INT_INVALID_SMMU_PAGE |
+ MC_INT_ARBITRATION_EMEM | MC_INT_SECURITY_VIOLATION |
+ MC_INT_DECERR_EMEM;
+ mc_writel(mc, value, MC_INTMASK);
+
+ return 0;
+}
+
+static struct platform_driver tegra_mc_driver = {
+ .driver = {
+ .name = "tegra-mc",
+ .of_match_table = tegra_mc_of_match,
+ .suppress_bind_attrs = true,
+ },
+ .prevent_deferred_probe = true,
+ .probe = tegra_mc_probe,
+};
+
+static int tegra_mc_init(void)
+{
+ return platform_driver_register(&tegra_mc_driver);
+}
+arch_initcall(tegra_mc_init);
+
+MODULE_AUTHOR("Thierry Reding <treding@nvidia.com>");
+MODULE_DESCRIPTION("NVIDIA Tegra Memory Controller driver");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+/*
+ * Copyright (C) 2014 NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef MEMORY_TEGRA_MC_H
+#define MEMORY_TEGRA_MC_H
+
+#include <linux/io.h>
+#include <linux/types.h>
+
+#include <soc/tegra/mc.h>
+
+static inline u32 mc_readl(struct tegra_mc *mc, unsigned long offset)
+{
+ return readl(mc->regs + offset);
+}
+
+static inline void mc_writel(struct tegra_mc *mc, u32 value,
+ unsigned long offset)
+{
+ writel(value, mc->regs + offset);
+}
+
+#ifdef CONFIG_ARCH_TEGRA_3x_SOC
+extern const struct tegra_mc_soc tegra30_mc_soc;
+#endif
+
+#ifdef CONFIG_ARCH_TEGRA_114_SOC
+extern const struct tegra_mc_soc tegra114_mc_soc;
+#endif
+
+#ifdef CONFIG_ARCH_TEGRA_124_SOC
+extern const struct tegra_mc_soc tegra124_mc_soc;
+#endif
+
+#endif /* MEMORY_TEGRA_MC_H */
--- /dev/null
+/*
+ * Copyright (C) 2014 NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/of.h>
+#include <linux/mm.h>
+
+#include <asm/cacheflush.h>
+
+#include <dt-bindings/memory/tegra114-mc.h>
+
+#include "mc.h"
+
+static const struct tegra_mc_client tegra114_mc_clients[] = {
+ {
+ .id = 0x00,
+ .name = "ptcr",
+ .swgroup = TEGRA_SWGROUP_PTC,
+ }, {
+ .id = 0x01,
+ .name = "display0a",
+ .swgroup = TEGRA_SWGROUP_DC,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 1,
+ },
+ .la = {
+ .reg = 0x2e8,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
+ }, {
+ .id = 0x02,
+ .name = "display0ab",
+ .swgroup = TEGRA_SWGROUP_DCB,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 2,
+ },
+ .la = {
+ .reg = 0x2f4,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
+ }, {
+ .id = 0x03,
+ .name = "display0b",
+ .swgroup = TEGRA_SWGROUP_DC,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 3,
+ },
+ .la = {
+ .reg = 0x2e8,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
+ }, {
+ .id = 0x04,
+ .name = "display0bb",
+ .swgroup = TEGRA_SWGROUP_DCB,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 4,
+ },
+ .la = {
+ .reg = 0x2f4,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
+ }, {
+ .id = 0x05,
+ .name = "display0c",
+ .swgroup = TEGRA_SWGROUP_DC,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 5,
+ },
+ .la = {
+ .reg = 0x2ec,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
+ }, {
+ .id = 0x06,
+ .name = "display0cb",
+ .swgroup = TEGRA_SWGROUP_DCB,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 6,
+ },
+ .la = {
+ .reg = 0x2f8,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
+ }, {
+ .id = 0x09,
+ .name = "eppup",
+ .swgroup = TEGRA_SWGROUP_EPP,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 9,
+ },
+ .la = {
+ .reg = 0x300,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x33,
+ },
+ }, {
+ .id = 0x0a,
+ .name = "g2pr",
+ .swgroup = TEGRA_SWGROUP_G2,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 10,
+ },
+ .la = {
+ .reg = 0x308,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x09,
+ },
+ }, {
+ .id = 0x0b,
+ .name = "g2sr",
+ .swgroup = TEGRA_SWGROUP_G2,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 11,
+ },
+ .la = {
+ .reg = 0x308,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x09,
+ },
+ }, {
+ .id = 0x0f,
+ .name = "avpcarm7r",
+ .swgroup = TEGRA_SWGROUP_AVPC,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 15,
+ },
+ .la = {
+ .reg = 0x2e4,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x04,
+ },
+ }, {
+ .id = 0x10,
+ .name = "displayhc",
+ .swgroup = TEGRA_SWGROUP_DC,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 16,
+ },
+ .la = {
+ .reg = 0x2f0,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x68,
+ },
+ }, {
+ .id = 0x11,
+ .name = "displayhcb",
+ .swgroup = TEGRA_SWGROUP_DCB,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 17,
+ },
+ .la = {
+ .reg = 0x2fc,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x68,
+ },
+ }, {
+ .id = 0x12,
+ .name = "fdcdrd",
+ .swgroup = TEGRA_SWGROUP_NV,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 18,
+ },
+ .la = {
+ .reg = 0x334,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x0c,
+ },
+ }, {
+ .id = 0x13,
+ .name = "fdcdrd2",
+ .swgroup = TEGRA_SWGROUP_NV,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 19,
+ },
+ .la = {
+ .reg = 0x33c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x0c,
+ },
+ }, {
+ .id = 0x14,
+ .name = "g2dr",
+ .swgroup = TEGRA_SWGROUP_G2,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 20,
+ },
+ .la = {
+ .reg = 0x30c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x0a,
+ },
+ }, {
+ .id = 0x15,
+ .name = "hdar",
+ .swgroup = TEGRA_SWGROUP_HDA,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 21,
+ },
+ .la = {
+ .reg = 0x318,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xff,
+ },
+ }, {
+ .id = 0x16,
+ .name = "host1xdmar",
+ .swgroup = TEGRA_SWGROUP_HC,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 22,
+ },
+ .la = {
+ .reg = 0x310,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x10,
+ },
+ }, {
+ .id = 0x17,
+ .name = "host1xr",
+ .swgroup = TEGRA_SWGROUP_HC,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 23,
+ },
+ .la = {
+ .reg = 0x310,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xa5,
+ },
+ }, {
+ .id = 0x18,
+ .name = "idxsrd",
+ .swgroup = TEGRA_SWGROUP_NV,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 24,
+ },
+ .la = {
+ .reg = 0x334,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x0b,
+ },
+ }, {
+ .id = 0x1c,
+ .name = "msencsrd",
+ .swgroup = TEGRA_SWGROUP_MSENC,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 28,
+ },
+ .la = {
+ .reg = 0x328,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x1d,
+ .name = "ppcsahbdmar",
+ .swgroup = TEGRA_SWGROUP_PPCS,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 29,
+ },
+ .la = {
+ .reg = 0x344,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x50,
+ },
+ }, {
+ .id = 0x1e,
+ .name = "ppcsahbslvr",
+ .swgroup = TEGRA_SWGROUP_PPCS,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 30,
+ },
+ .la = {
+ .reg = 0x344,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xe8,
+ },
+ }, {
+ .id = 0x20,
+ .name = "texl2srd",
+ .swgroup = TEGRA_SWGROUP_NV,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 0,
+ },
+ .la = {
+ .reg = 0x338,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x0c,
+ },
+ }, {
+ .id = 0x22,
+ .name = "vdebsevr",
+ .swgroup = TEGRA_SWGROUP_VDE,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 2,
+ },
+ .la = {
+ .reg = 0x354,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xff,
+ },
+ }, {
+ .id = 0x23,
+ .name = "vdember",
+ .swgroup = TEGRA_SWGROUP_VDE,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 3,
+ },
+ .la = {
+ .reg = 0x354,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xff,
+ },
+ }, {
+ .id = 0x24,
+ .name = "vdemcer",
+ .swgroup = TEGRA_SWGROUP_VDE,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 4,
+ },
+ .la = {
+ .reg = 0x358,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xb8,
+ },
+ }, {
+ .id = 0x25,
+ .name = "vdetper",
+ .swgroup = TEGRA_SWGROUP_VDE,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 5,
+ },
+ .la = {
+ .reg = 0x358,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xee,
+ },
+ }, {
+ .id = 0x26,
+ .name = "mpcorelpr",
+ .swgroup = TEGRA_SWGROUP_MPCORELP,
+ .la = {
+ .reg = 0x324,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x04,
+ },
+ }, {
+ .id = 0x27,
+ .name = "mpcorer",
+ .swgroup = TEGRA_SWGROUP_MPCORE,
+ .la = {
+ .reg = 0x320,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x04,
+ },
+ }, {
+ .id = 0x28,
+ .name = "eppu",
+ .swgroup = TEGRA_SWGROUP_EPP,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 8,
+ },
+ .la = {
+ .reg = 0x300,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x33,
+ },
+ }, {
+ .id = 0x29,
+ .name = "eppv",
+ .swgroup = TEGRA_SWGROUP_EPP,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 9,
+ },
+ .la = {
+ .reg = 0x304,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x6c,
+ },
+ }, {
+ .id = 0x2a,
+ .name = "eppy",
+ .swgroup = TEGRA_SWGROUP_EPP,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 10,
+ },
+ .la = {
+ .reg = 0x304,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x6c,
+ },
+ }, {
+ .id = 0x2b,
+ .name = "msencswr",
+ .swgroup = TEGRA_SWGROUP_MSENC,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 11,
+ },
+ .la = {
+ .reg = 0x328,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x2c,
+ .name = "viwsb",
+ .swgroup = TEGRA_SWGROUP_VI,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 12,
+ },
+ .la = {
+ .reg = 0x364,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x47,
+ },
+ }, {
+ .id = 0x2d,
+ .name = "viwu",
+ .swgroup = TEGRA_SWGROUP_VI,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 13,
+ },
+ .la = {
+ .reg = 0x368,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xff,
+ },
+ }, {
+ .id = 0x2e,
+ .name = "viwv",
+ .swgroup = TEGRA_SWGROUP_VI,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 14,
+ },
+ .la = {
+ .reg = 0x368,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xff,
+ },
+ }, {
+ .id = 0x2f,
+ .name = "viwy",
+ .swgroup = TEGRA_SWGROUP_VI,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 15,
+ },
+ .la = {
+ .reg = 0x36c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x47,
+ },
+ }, {
+ .id = 0x30,
+ .name = "g2dw",
+ .swgroup = TEGRA_SWGROUP_G2,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 16,
+ },
+ .la = {
+ .reg = 0x30c,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x9,
+ },
+ }, {
+ .id = 0x32,
+ .name = "avpcarm7w",
+ .swgroup = TEGRA_SWGROUP_AVPC,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 18,
+ },
+ .la = {
+ .reg = 0x2e4,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x0e,
+ },
+ }, {
+ .id = 0x33,
+ .name = "fdcdwr",
+ .swgroup = TEGRA_SWGROUP_NV,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 19,
+ },
+ .la = {
+ .reg = 0x338,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x10,
+ },
+ }, {
+ .id = 0x34,
+ .name = "fdcwr2",
+ .swgroup = TEGRA_SWGROUP_NV,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 20,
+ },
+ .la = {
+ .reg = 0x340,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x10,
+ },
+ }, {
+ .id = 0x35,
+ .name = "hdaw",
+ .swgroup = TEGRA_SWGROUP_HDA,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 21,
+ },
+ .la = {
+ .reg = 0x318,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xff,
+ },
+ }, {
+ .id = 0x36,
+ .name = "host1xw",
+ .swgroup = TEGRA_SWGROUP_HC,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 22,
+ },
+ .la = {
+ .reg = 0x314,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x25,
+ },
+ }, {
+ .id = 0x37,
+ .name = "ispw",
+ .swgroup = TEGRA_SWGROUP_ISP,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 23,
+ },
+ .la = {
+ .reg = 0x31c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xff,
+ },
+ }, {
+ .id = 0x38,
+ .name = "mpcorelpw",
+ .swgroup = TEGRA_SWGROUP_MPCORELP,
+ .la = {
+ .reg = 0x324,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x39,
+ .name = "mpcorew",
+ .swgroup = TEGRA_SWGROUP_MPCORE,
+ .la = {
+ .reg = 0x320,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x0e,
+ },
+ }, {
+ .id = 0x3b,
+ .name = "ppcsahbdmaw",
+ .swgroup = TEGRA_SWGROUP_PPCS,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 27,
+ },
+ .la = {
+ .reg = 0x348,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xa5,
+ },
+ }, {
+ .id = 0x3c,
+ .name = "ppcsahbslvw",
+ .swgroup = TEGRA_SWGROUP_PPCS,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 28,
+ },
+ .la = {
+ .reg = 0x348,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xe8,
+ },
+ }, {
+ .id = 0x3e,
+ .name = "vdebsevw",
+ .swgroup = TEGRA_SWGROUP_VDE,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 30,
+ },
+ .la = {
+ .reg = 0x35c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xff,
+ },
+ }, {
+ .id = 0x3f,
+ .name = "vdedbgw",
+ .swgroup = TEGRA_SWGROUP_VDE,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 31,
+ },
+ .la = {
+ .reg = 0x35c,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xff,
+ },
+ }, {
+ .id = 0x40,
+ .name = "vdembew",
+ .swgroup = TEGRA_SWGROUP_VDE,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 0,
+ },
+ .la = {
+ .reg = 0x360,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x89,
+ },
+ }, {
+ .id = 0x41,
+ .name = "vdetpmw",
+ .swgroup = TEGRA_SWGROUP_VDE,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 1,
+ },
+ .la = {
+ .reg = 0x360,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x59,
+ },
+ }, {
+ .id = 0x4a,
+ .name = "xusb_hostr",
+ .swgroup = TEGRA_SWGROUP_XUSB_HOST,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 10,
+ },
+ .la = {
+ .reg = 0x37c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xa5,
+ },
+ }, {
+ .id = 0x4b,
+ .name = "xusb_hostw",
+ .swgroup = TEGRA_SWGROUP_XUSB_HOST,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 11,
+ },
+ .la = {
+ .reg = 0x37c,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xa5,
+ },
+ }, {
+ .id = 0x4c,
+ .name = "xusb_devr",
+ .swgroup = TEGRA_SWGROUP_XUSB_DEV,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 12,
+ },
+ .la = {
+ .reg = 0x380,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xa5,
+ },
+ }, {
+ .id = 0x4d,
+ .name = "xusb_devw",
+ .swgroup = TEGRA_SWGROUP_XUSB_DEV,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 13,
+ },
+ .la = {
+ .reg = 0x380,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xa5,
+ },
+ }, {
+ .id = 0x4e,
+ .name = "fdcdwr3",
+ .swgroup = TEGRA_SWGROUP_NV,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 14,
+ },
+ .la = {
+ .reg = 0x388,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x10,
+ },
+ }, {
+ .id = 0x4f,
+ .name = "fdcdrd3",
+ .swgroup = TEGRA_SWGROUP_NV,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 15,
+ },
+ .la = {
+ .reg = 0x384,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x0c,
+ },
+ }, {
+ .id = 0x50,
+ .name = "fdcwr4",
+ .swgroup = TEGRA_SWGROUP_NV,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 16,
+ },
+ .la = {
+ .reg = 0x388,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x10,
+ },
+ }, {
+ .id = 0x51,
+ .name = "fdcrd4",
+ .swgroup = TEGRA_SWGROUP_NV,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 17,
+ },
+ .la = {
+ .reg = 0x384,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x0c,
+ },
+ }, {
+ .id = 0x52,
+ .name = "emucifr",
+ .swgroup = TEGRA_SWGROUP_EMUCIF,
+ .la = {
+ .reg = 0x38c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x04,
+ },
+ }, {
+ .id = 0x53,
+ .name = "emucifw",
+ .swgroup = TEGRA_SWGROUP_EMUCIF,
+ .la = {
+ .reg = 0x38c,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x0e,
+ },
+ }, {
+ .id = 0x54,
+ .name = "tsecsrd",
+ .swgroup = TEGRA_SWGROUP_TSEC,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 20,
+ },
+ .la = {
+ .reg = 0x390,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x50,
+ },
+ }, {
+ .id = 0x55,
+ .name = "tsecswr",
+ .swgroup = TEGRA_SWGROUP_TSEC,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 21,
+ },
+ .la = {
+ .reg = 0x390,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x50,
+ },
+ },
+};
+
+static const struct tegra_smmu_swgroup tegra114_swgroups[] = {
+ { .swgroup = TEGRA_SWGROUP_DC, .reg = 0x240 },
+ { .swgroup = TEGRA_SWGROUP_DCB, .reg = 0x244 },
+ { .swgroup = TEGRA_SWGROUP_EPP, .reg = 0x248 },
+ { .swgroup = TEGRA_SWGROUP_G2, .reg = 0x24c },
+ { .swgroup = TEGRA_SWGROUP_AVPC, .reg = 0x23c },
+ { .swgroup = TEGRA_SWGROUP_NV, .reg = 0x268 },
+ { .swgroup = TEGRA_SWGROUP_HDA, .reg = 0x254 },
+ { .swgroup = TEGRA_SWGROUP_HC, .reg = 0x250 },
+ { .swgroup = TEGRA_SWGROUP_MSENC, .reg = 0x264 },
+ { .swgroup = TEGRA_SWGROUP_PPCS, .reg = 0x270 },
+ { .swgroup = TEGRA_SWGROUP_VDE, .reg = 0x27c },
+ { .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 },
+ { .swgroup = TEGRA_SWGROUP_ISP, .reg = 0x258 },
+ { .swgroup = TEGRA_SWGROUP_XUSB_HOST, .reg = 0x288 },
+ { .swgroup = TEGRA_SWGROUP_XUSB_DEV, .reg = 0x28c },
+ { .swgroup = TEGRA_SWGROUP_TSEC, .reg = 0x294 },
+};
+
+static void tegra114_flush_dcache(struct page *page, unsigned long offset,
+ size_t size)
+{
+ phys_addr_t phys = page_to_phys(page) + offset;
+ void *virt = page_address(page) + offset;
+
+ __cpuc_flush_dcache_area(virt, size);
+ outer_flush_range(phys, phys + size);
+}
+
+static const struct tegra_smmu_ops tegra114_smmu_ops = {
+ .flush_dcache = tegra114_flush_dcache,
+};
+
+static const struct tegra_smmu_soc tegra114_smmu_soc = {
+ .clients = tegra114_mc_clients,
+ .num_clients = ARRAY_SIZE(tegra114_mc_clients),
+ .swgroups = tegra114_swgroups,
+ .num_swgroups = ARRAY_SIZE(tegra114_swgroups),
+ .supports_round_robin_arbitration = false,
+ .supports_request_limit = false,
+ .num_asids = 4,
+ .ops = &tegra114_smmu_ops,
+};
+
+const struct tegra_mc_soc tegra114_mc_soc = {
+ .clients = tegra114_mc_clients,
+ .num_clients = ARRAY_SIZE(tegra114_mc_clients),
+ .num_address_bits = 32,
+ .atom_size = 32,
+ .smmu = &tegra114_smmu_soc,
+};
--- /dev/null
+/*
+ * Copyright (C) 2014 NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/of.h>
+#include <linux/mm.h>
+
+#include <asm/cacheflush.h>
+
+#include <dt-bindings/memory/tegra124-mc.h>
+
+#include "mc.h"
+
+static const struct tegra_mc_client tegra124_mc_clients[] = {
+ {
+ .id = 0x00,
+ .name = "ptcr",
+ .swgroup = TEGRA_SWGROUP_PTC,
+ }, {
+ .id = 0x01,
+ .name = "display0a",
+ .swgroup = TEGRA_SWGROUP_DC,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 1,
+ },
+ .la = {
+ .reg = 0x2e8,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xc2,
+ },
+ }, {
+ .id = 0x02,
+ .name = "display0ab",
+ .swgroup = TEGRA_SWGROUP_DCB,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 2,
+ },
+ .la = {
+ .reg = 0x2f4,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xc6,
+ },
+ }, {
+ .id = 0x03,
+ .name = "display0b",
+ .swgroup = TEGRA_SWGROUP_DC,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 3,
+ },
+ .la = {
+ .reg = 0x2e8,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x50,
+ },
+ }, {
+ .id = 0x04,
+ .name = "display0bb",
+ .swgroup = TEGRA_SWGROUP_DCB,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 4,
+ },
+ .la = {
+ .reg = 0x2f4,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x50,
+ },
+ }, {
+ .id = 0x05,
+ .name = "display0c",
+ .swgroup = TEGRA_SWGROUP_DC,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 5,
+ },
+ .la = {
+ .reg = 0x2ec,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x50,
+ },
+ }, {
+ .id = 0x06,
+ .name = "display0cb",
+ .swgroup = TEGRA_SWGROUP_DCB,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 6,
+ },
+ .la = {
+ .reg = 0x2f8,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x50,
+ },
+ }, {
+ .id = 0x0e,
+ .name = "afir",
+ .swgroup = TEGRA_SWGROUP_AFI,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 14,
+ },
+ .la = {
+ .reg = 0x2e0,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x13,
+ },
+ }, {
+ .id = 0x0f,
+ .name = "avpcarm7r",
+ .swgroup = TEGRA_SWGROUP_AVPC,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 15,
+ },
+ .la = {
+ .reg = 0x2e4,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x04,
+ },
+ }, {
+ .id = 0x10,
+ .name = "displayhc",
+ .swgroup = TEGRA_SWGROUP_DC,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 16,
+ },
+ .la = {
+ .reg = 0x2f0,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x50,
+ },
+ }, {
+ .id = 0x11,
+ .name = "displayhcb",
+ .swgroup = TEGRA_SWGROUP_DCB,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 17,
+ },
+ .la = {
+ .reg = 0x2fc,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x50,
+ },
+ }, {
+ .id = 0x15,
+ .name = "hdar",
+ .swgroup = TEGRA_SWGROUP_HDA,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 21,
+ },
+ .la = {
+ .reg = 0x318,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x24,
+ },
+ }, {
+ .id = 0x16,
+ .name = "host1xdmar",
+ .swgroup = TEGRA_SWGROUP_HC,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 22,
+ },
+ .la = {
+ .reg = 0x310,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x1e,
+ },
+ }, {
+ .id = 0x17,
+ .name = "host1xr",
+ .swgroup = TEGRA_SWGROUP_HC,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 23,
+ },
+ .la = {
+ .reg = 0x310,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x50,
+ },
+ }, {
+ .id = 0x1c,
+ .name = "msencsrd",
+ .swgroup = TEGRA_SWGROUP_MSENC,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 28,
+ },
+ .la = {
+ .reg = 0x328,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x23,
+ },
+ }, {
+ .id = 0x1d,
+ .name = "ppcsahbdmar",
+ .swgroup = TEGRA_SWGROUP_PPCS,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 29,
+ },
+ .la = {
+ .reg = 0x344,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x49,
+ },
+ }, {
+ .id = 0x1e,
+ .name = "ppcsahbslvr",
+ .swgroup = TEGRA_SWGROUP_PPCS,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 30,
+ },
+ .la = {
+ .reg = 0x344,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x1a,
+ },
+ }, {
+ .id = 0x1f,
+ .name = "satar",
+ .swgroup = TEGRA_SWGROUP_SATA,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 31,
+ },
+ .la = {
+ .reg = 0x350,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x65,
+ },
+ }, {
+ .id = 0x22,
+ .name = "vdebsevr",
+ .swgroup = TEGRA_SWGROUP_VDE,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 2,
+ },
+ .la = {
+ .reg = 0x354,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x4f,
+ },
+ }, {
+ .id = 0x23,
+ .name = "vdember",
+ .swgroup = TEGRA_SWGROUP_VDE,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 3,
+ },
+ .la = {
+ .reg = 0x354,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x3d,
+ },
+ }, {
+ .id = 0x24,
+ .name = "vdemcer",
+ .swgroup = TEGRA_SWGROUP_VDE,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 4,
+ },
+ .la = {
+ .reg = 0x358,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x66,
+ },
+ }, {
+ .id = 0x25,
+ .name = "vdetper",
+ .swgroup = TEGRA_SWGROUP_VDE,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 5,
+ },
+ .la = {
+ .reg = 0x358,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xa5,
+ },
+ }, {
+ .id = 0x26,
+ .name = "mpcorelpr",
+ .swgroup = TEGRA_SWGROUP_MPCORELP,
+ .la = {
+ .reg = 0x324,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x04,
+ },
+ }, {
+ .id = 0x27,
+ .name = "mpcorer",
+ .swgroup = TEGRA_SWGROUP_MPCORE,
+ .la = {
+ .reg = 0x320,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x04,
+ },
+ }, {
+ .id = 0x2b,
+ .name = "msencswr",
+ .swgroup = TEGRA_SWGROUP_MSENC,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 11,
+ },
+ .la = {
+ .reg = 0x328,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x31,
+ .name = "afiw",
+ .swgroup = TEGRA_SWGROUP_AFI,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 17,
+ },
+ .la = {
+ .reg = 0x2e0,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x32,
+ .name = "avpcarm7w",
+ .swgroup = TEGRA_SWGROUP_AVPC,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 18,
+ },
+ .la = {
+ .reg = 0x2e4,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x35,
+ .name = "hdaw",
+ .swgroup = TEGRA_SWGROUP_HDA,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 21,
+ },
+ .la = {
+ .reg = 0x318,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x36,
+ .name = "host1xw",
+ .swgroup = TEGRA_SWGROUP_HC,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 22,
+ },
+ .la = {
+ .reg = 0x314,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x38,
+ .name = "mpcorelpw",
+ .swgroup = TEGRA_SWGROUP_MPCORELP,
+ .la = {
+ .reg = 0x324,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x39,
+ .name = "mpcorew",
+ .swgroup = TEGRA_SWGROUP_MPCORE,
+ .la = {
+ .reg = 0x320,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x3b,
+ .name = "ppcsahbdmaw",
+ .swgroup = TEGRA_SWGROUP_PPCS,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 27,
+ },
+ .la = {
+ .reg = 0x348,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x3c,
+ .name = "ppcsahbslvw",
+ .swgroup = TEGRA_SWGROUP_PPCS,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 28,
+ },
+ .la = {
+ .reg = 0x348,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x3d,
+ .name = "sataw",
+ .swgroup = TEGRA_SWGROUP_SATA,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 29,
+ },
+ .la = {
+ .reg = 0x350,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x65,
+ },
+ }, {
+ .id = 0x3e,
+ .name = "vdebsevw",
+ .swgroup = TEGRA_SWGROUP_VDE,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 30,
+ },
+ .la = {
+ .reg = 0x35c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x3f,
+ .name = "vdedbgw",
+ .swgroup = TEGRA_SWGROUP_VDE,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 31,
+ },
+ .la = {
+ .reg = 0x35c,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x40,
+ .name = "vdembew",
+ .swgroup = TEGRA_SWGROUP_VDE,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 0,
+ },
+ .la = {
+ .reg = 0x360,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x41,
+ .name = "vdetpmw",
+ .swgroup = TEGRA_SWGROUP_VDE,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 1,
+ },
+ .la = {
+ .reg = 0x360,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x44,
+ .name = "ispra",
+ .swgroup = TEGRA_SWGROUP_ISP2,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 4,
+ },
+ .la = {
+ .reg = 0x370,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x18,
+ },
+ }, {
+ .id = 0x46,
+ .name = "ispwa",
+ .swgroup = TEGRA_SWGROUP_ISP2,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 6,
+ },
+ .la = {
+ .reg = 0x374,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x47,
+ .name = "ispwb",
+ .swgroup = TEGRA_SWGROUP_ISP2,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 7,
+ },
+ .la = {
+ .reg = 0x374,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x4a,
+ .name = "xusb_hostr",
+ .swgroup = TEGRA_SWGROUP_XUSB_HOST,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 10,
+ },
+ .la = {
+ .reg = 0x37c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x39,
+ },
+ }, {
+ .id = 0x4b,
+ .name = "xusb_hostw",
+ .swgroup = TEGRA_SWGROUP_XUSB_HOST,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 11,
+ },
+ .la = {
+ .reg = 0x37c,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x4c,
+ .name = "xusb_devr",
+ .swgroup = TEGRA_SWGROUP_XUSB_DEV,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 12,
+ },
+ .la = {
+ .reg = 0x380,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x39,
+ },
+ }, {
+ .id = 0x4d,
+ .name = "xusb_devw",
+ .swgroup = TEGRA_SWGROUP_XUSB_DEV,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 13,
+ },
+ .la = {
+ .reg = 0x380,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x4e,
+ .name = "isprab",
+ .swgroup = TEGRA_SWGROUP_ISP2B,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 14,
+ },
+ .la = {
+ .reg = 0x384,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x18,
+ },
+ }, {
+ .id = 0x50,
+ .name = "ispwab",
+ .swgroup = TEGRA_SWGROUP_ISP2B,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 16,
+ },
+ .la = {
+ .reg = 0x388,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x51,
+ .name = "ispwbb",
+ .swgroup = TEGRA_SWGROUP_ISP2B,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 17,
+ },
+ .la = {
+ .reg = 0x388,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x54,
+ .name = "tsecsrd",
+ .swgroup = TEGRA_SWGROUP_TSEC,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 20,
+ },
+ .la = {
+ .reg = 0x390,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x9b,
+ },
+ }, {
+ .id = 0x55,
+ .name = "tsecswr",
+ .swgroup = TEGRA_SWGROUP_TSEC,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 21,
+ },
+ .la = {
+ .reg = 0x390,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x56,
+ .name = "a9avpscr",
+ .swgroup = TEGRA_SWGROUP_A9AVP,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 22,
+ },
+ .la = {
+ .reg = 0x3a4,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x04,
+ },
+ }, {
+ .id = 0x57,
+ .name = "a9avpscw",
+ .swgroup = TEGRA_SWGROUP_A9AVP,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 23,
+ },
+ .la = {
+ .reg = 0x3a4,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x58,
+ .name = "gpusrd",
+ .swgroup = TEGRA_SWGROUP_GPU,
+ .smmu = {
+ /* read-only */
+ .reg = 0x230,
+ .bit = 24,
+ },
+ .la = {
+ .reg = 0x3c8,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x1a,
+ },
+ }, {
+ .id = 0x59,
+ .name = "gpuswr",
+ .swgroup = TEGRA_SWGROUP_GPU,
+ .smmu = {
+ /* read-only */
+ .reg = 0x230,
+ .bit = 25,
+ },
+ .la = {
+ .reg = 0x3c8,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x5a,
+ .name = "displayt",
+ .swgroup = TEGRA_SWGROUP_DC,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 26,
+ },
+ .la = {
+ .reg = 0x2f0,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x50,
+ },
+ }, {
+ .id = 0x60,
+ .name = "sdmmcra",
+ .swgroup = TEGRA_SWGROUP_SDMMC1A,
+ .smmu = {
+ .reg = 0x234,
+ .bit = 0,
+ },
+ .la = {
+ .reg = 0x3b8,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x49,
+ },
+ }, {
+ .id = 0x61,
+ .name = "sdmmcraa",
+ .swgroup = TEGRA_SWGROUP_SDMMC2A,
+ .smmu = {
+ .reg = 0x234,
+ .bit = 1,
+ },
+ .la = {
+ .reg = 0x3bc,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x49,
+ },
+ }, {
+ .id = 0x62,
+ .name = "sdmmcr",
+ .swgroup = TEGRA_SWGROUP_SDMMC3A,
+ .smmu = {
+ .reg = 0x234,
+ .bit = 2,
+ },
+ .la = {
+ .reg = 0x3c0,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x49,
+ },
+ }, {
+ .id = 0x63,
+ .swgroup = TEGRA_SWGROUP_SDMMC4A,
+ .name = "sdmmcrab",
+ .smmu = {
+ .reg = 0x234,
+ .bit = 3,
+ },
+ .la = {
+ .reg = 0x3c4,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x49,
+ },
+ }, {
+ .id = 0x64,
+ .name = "sdmmcwa",
+ .swgroup = TEGRA_SWGROUP_SDMMC1A,
+ .smmu = {
+ .reg = 0x234,
+ .bit = 4,
+ },
+ .la = {
+ .reg = 0x3b8,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x65,
+ .name = "sdmmcwaa",
+ .swgroup = TEGRA_SWGROUP_SDMMC2A,
+ .smmu = {
+ .reg = 0x234,
+ .bit = 5,
+ },
+ .la = {
+ .reg = 0x3bc,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x66,
+ .name = "sdmmcw",
+ .swgroup = TEGRA_SWGROUP_SDMMC3A,
+ .smmu = {
+ .reg = 0x234,
+ .bit = 6,
+ },
+ .la = {
+ .reg = 0x3c0,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x67,
+ .name = "sdmmcwab",
+ .swgroup = TEGRA_SWGROUP_SDMMC4A,
+ .smmu = {
+ .reg = 0x234,
+ .bit = 7,
+ },
+ .la = {
+ .reg = 0x3c4,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x6c,
+ .name = "vicsrd",
+ .swgroup = TEGRA_SWGROUP_VIC,
+ .smmu = {
+ .reg = 0x234,
+ .bit = 12,
+ },
+ .la = {
+ .reg = 0x394,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x1a,
+ },
+ }, {
+ .id = 0x6d,
+ .name = "vicswr",
+ .swgroup = TEGRA_SWGROUP_VIC,
+ .smmu = {
+ .reg = 0x234,
+ .bit = 13,
+ },
+ .la = {
+ .reg = 0x394,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x72,
+ .name = "viw",
+ .swgroup = TEGRA_SWGROUP_VI,
+ .smmu = {
+ .reg = 0x234,
+ .bit = 18,
+ },
+ .la = {
+ .reg = 0x398,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x73,
+ .name = "displayd",
+ .swgroup = TEGRA_SWGROUP_DC,
+ .smmu = {
+ .reg = 0x234,
+ .bit = 19,
+ },
+ .la = {
+ .reg = 0x3c8,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x50,
+ },
+ },
+};
+
+static const struct tegra_smmu_swgroup tegra124_swgroups[] = {
+ { .swgroup = TEGRA_SWGROUP_DC, .reg = 0x240 },
+ { .swgroup = TEGRA_SWGROUP_DCB, .reg = 0x244 },
+ { .swgroup = TEGRA_SWGROUP_AFI, .reg = 0x238 },
+ { .swgroup = TEGRA_SWGROUP_AVPC, .reg = 0x23c },
+ { .swgroup = TEGRA_SWGROUP_HDA, .reg = 0x254 },
+ { .swgroup = TEGRA_SWGROUP_HC, .reg = 0x250 },
+ { .swgroup = TEGRA_SWGROUP_MSENC, .reg = 0x264 },
+ { .swgroup = TEGRA_SWGROUP_PPCS, .reg = 0x270 },
+ { .swgroup = TEGRA_SWGROUP_SATA, .reg = 0x274 },
+ { .swgroup = TEGRA_SWGROUP_VDE, .reg = 0x27c },
+ { .swgroup = TEGRA_SWGROUP_ISP2, .reg = 0x258 },
+ { .swgroup = TEGRA_SWGROUP_XUSB_HOST, .reg = 0x288 },
+ { .swgroup = TEGRA_SWGROUP_XUSB_DEV, .reg = 0x28c },
+ { .swgroup = TEGRA_SWGROUP_ISP2B, .reg = 0xaa4 },
+ { .swgroup = TEGRA_SWGROUP_TSEC, .reg = 0x294 },
+ { .swgroup = TEGRA_SWGROUP_A9AVP, .reg = 0x290 },
+ { .swgroup = TEGRA_SWGROUP_GPU, .reg = 0xaac },
+ { .swgroup = TEGRA_SWGROUP_SDMMC1A, .reg = 0xa94 },
+ { .swgroup = TEGRA_SWGROUP_SDMMC2A, .reg = 0xa98 },
+ { .swgroup = TEGRA_SWGROUP_SDMMC3A, .reg = 0xa9c },
+ { .swgroup = TEGRA_SWGROUP_SDMMC4A, .reg = 0xaa0 },
+ { .swgroup = TEGRA_SWGROUP_VIC, .reg = 0x284 },
+ { .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 },
+};
+
+#ifdef CONFIG_ARCH_TEGRA_124_SOC
+static void tegra124_flush_dcache(struct page *page, unsigned long offset,
+ size_t size)
+{
+ phys_addr_t phys = page_to_phys(page) + offset;
+ void *virt = page_address(page) + offset;
+
+ __cpuc_flush_dcache_area(virt, size);
+ outer_flush_range(phys, phys + size);
+}
+
+static const struct tegra_smmu_ops tegra124_smmu_ops = {
+ .flush_dcache = tegra124_flush_dcache,
+};
+
+static const struct tegra_smmu_soc tegra124_smmu_soc = {
+ .clients = tegra124_mc_clients,
+ .num_clients = ARRAY_SIZE(tegra124_mc_clients),
+ .swgroups = tegra124_swgroups,
+ .num_swgroups = ARRAY_SIZE(tegra124_swgroups),
+ .supports_round_robin_arbitration = true,
+ .supports_request_limit = true,
+ .num_asids = 128,
+ .ops = &tegra124_smmu_ops,
+};
+
+const struct tegra_mc_soc tegra124_mc_soc = {
+ .clients = tegra124_mc_clients,
+ .num_clients = ARRAY_SIZE(tegra124_mc_clients),
+ .num_address_bits = 34,
+ .atom_size = 32,
+ .smmu = &tegra124_smmu_soc,
+};
+#endif /* CONFIG_ARCH_TEGRA_124_SOC */
--- /dev/null
+/*
+ * Copyright (C) 2014 NVIDIA CORPORATION. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/of.h>
+#include <linux/mm.h>
+
+#include <asm/cacheflush.h>
+
+#include <dt-bindings/memory/tegra30-mc.h>
+
+#include "mc.h"
+
+static const struct tegra_mc_client tegra30_mc_clients[] = {
+ {
+ .id = 0x00,
+ .name = "ptcr",
+ .swgroup = TEGRA_SWGROUP_PTC,
+ }, {
+ .id = 0x01,
+ .name = "display0a",
+ .swgroup = TEGRA_SWGROUP_DC,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 1,
+ },
+ .la = {
+ .reg = 0x2e8,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
+ }, {
+ .id = 0x02,
+ .name = "display0ab",
+ .swgroup = TEGRA_SWGROUP_DCB,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 2,
+ },
+ .la = {
+ .reg = 0x2f4,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
+ }, {
+ .id = 0x03,
+ .name = "display0b",
+ .swgroup = TEGRA_SWGROUP_DC,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 3,
+ },
+ .la = {
+ .reg = 0x2e8,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
+ }, {
+ .id = 0x04,
+ .name = "display0bb",
+ .swgroup = TEGRA_SWGROUP_DCB,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 4,
+ },
+ .la = {
+ .reg = 0x2f4,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
+ }, {
+ .id = 0x05,
+ .name = "display0c",
+ .swgroup = TEGRA_SWGROUP_DC,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 5,
+ },
+ .la = {
+ .reg = 0x2ec,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
+ }, {
+ .id = 0x06,
+ .name = "display0cb",
+ .swgroup = TEGRA_SWGROUP_DCB,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 6,
+ },
+ .la = {
+ .reg = 0x2f8,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
+ }, {
+ .id = 0x07,
+ .name = "display1b",
+ .swgroup = TEGRA_SWGROUP_DC,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 7,
+ },
+ .la = {
+ .reg = 0x2ec,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
+ }, {
+ .id = 0x08,
+ .name = "display1bb",
+ .swgroup = TEGRA_SWGROUP_DCB,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 8,
+ },
+ .la = {
+ .reg = 0x2f8,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x4e,
+ },
+ }, {
+ .id = 0x09,
+ .name = "eppup",
+ .swgroup = TEGRA_SWGROUP_EPP,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 9,
+ },
+ .la = {
+ .reg = 0x300,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x17,
+ },
+ }, {
+ .id = 0x0a,
+ .name = "g2pr",
+ .swgroup = TEGRA_SWGROUP_G2,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 10,
+ },
+ .la = {
+ .reg = 0x308,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x09,
+ },
+ }, {
+ .id = 0x0b,
+ .name = "g2sr",
+ .swgroup = TEGRA_SWGROUP_G2,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 11,
+ },
+ .la = {
+ .reg = 0x308,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x09,
+ },
+ }, {
+ .id = 0x0c,
+ .name = "mpeunifbr",
+ .swgroup = TEGRA_SWGROUP_MPE,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 12,
+ },
+ .la = {
+ .reg = 0x328,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x50,
+ },
+ }, {
+ .id = 0x0d,
+ .name = "viruv",
+ .swgroup = TEGRA_SWGROUP_VI,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 13,
+ },
+ .la = {
+ .reg = 0x364,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x2c,
+ },
+ }, {
+ .id = 0x0e,
+ .name = "afir",
+ .swgroup = TEGRA_SWGROUP_AFI,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 14,
+ },
+ .la = {
+ .reg = 0x2e0,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x10,
+ },
+ }, {
+ .id = 0x0f,
+ .name = "avpcarm7r",
+ .swgroup = TEGRA_SWGROUP_AVPC,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 15,
+ },
+ .la = {
+ .reg = 0x2e4,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x04,
+ },
+ }, {
+ .id = 0x10,
+ .name = "displayhc",
+ .swgroup = TEGRA_SWGROUP_DC,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 16,
+ },
+ .la = {
+ .reg = 0x2f0,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xff,
+ },
+ }, {
+ .id = 0x11,
+ .name = "displayhcb",
+ .swgroup = TEGRA_SWGROUP_DCB,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 17,
+ },
+ .la = {
+ .reg = 0x2fc,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xff,
+ },
+ }, {
+ .id = 0x12,
+ .name = "fdcdrd",
+ .swgroup = TEGRA_SWGROUP_NV,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 18,
+ },
+ .la = {
+ .reg = 0x334,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x0a,
+ },
+ }, {
+ .id = 0x13,
+ .name = "fdcdrd2",
+ .swgroup = TEGRA_SWGROUP_NV2,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 19,
+ },
+ .la = {
+ .reg = 0x33c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x0a,
+ },
+ }, {
+ .id = 0x14,
+ .name = "g2dr",
+ .swgroup = TEGRA_SWGROUP_G2,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 20,
+ },
+ .la = {
+ .reg = 0x30c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x0a,
+ },
+ }, {
+ .id = 0x15,
+ .name = "hdar",
+ .swgroup = TEGRA_SWGROUP_HDA,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 21,
+ },
+ .la = {
+ .reg = 0x318,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xff,
+ },
+ }, {
+ .id = 0x16,
+ .name = "host1xdmar",
+ .swgroup = TEGRA_SWGROUP_HC,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 22,
+ },
+ .la = {
+ .reg = 0x310,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x05,
+ },
+ }, {
+ .id = 0x17,
+ .name = "host1xr",
+ .swgroup = TEGRA_SWGROUP_HC,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 23,
+ },
+ .la = {
+ .reg = 0x310,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x50,
+ },
+ }, {
+ .id = 0x18,
+ .name = "idxsrd",
+ .swgroup = TEGRA_SWGROUP_NV,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 24,
+ },
+ .la = {
+ .reg = 0x334,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x13,
+ },
+ }, {
+ .id = 0x19,
+ .name = "idxsrd2",
+ .swgroup = TEGRA_SWGROUP_NV2,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 25,
+ },
+ .la = {
+ .reg = 0x33c,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x13,
+ },
+ }, {
+ .id = 0x1a,
+ .name = "mpe_ipred",
+ .swgroup = TEGRA_SWGROUP_MPE,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 26,
+ },
+ .la = {
+ .reg = 0x328,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x80,
+ },
+ }, {
+ .id = 0x1b,
+ .name = "mpeamemrd",
+ .swgroup = TEGRA_SWGROUP_MPE,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 27,
+ },
+ .la = {
+ .reg = 0x32c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x42,
+ },
+ }, {
+ .id = 0x1c,
+ .name = "mpecsrd",
+ .swgroup = TEGRA_SWGROUP_MPE,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 28,
+ },
+ .la = {
+ .reg = 0x32c,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xff,
+ },
+ }, {
+ .id = 0x1d,
+ .name = "ppcsahbdmar",
+ .swgroup = TEGRA_SWGROUP_PPCS,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 29,
+ },
+ .la = {
+ .reg = 0x344,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x10,
+ },
+ }, {
+ .id = 0x1e,
+ .name = "ppcsahbslvr",
+ .swgroup = TEGRA_SWGROUP_PPCS,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 30,
+ },
+ .la = {
+ .reg = 0x344,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x12,
+ },
+ }, {
+ .id = 0x1f,
+ .name = "satar",
+ .swgroup = TEGRA_SWGROUP_SATA,
+ .smmu = {
+ .reg = 0x228,
+ .bit = 31,
+ },
+ .la = {
+ .reg = 0x350,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x33,
+ },
+ }, {
+ .id = 0x20,
+ .name = "texsrd",
+ .swgroup = TEGRA_SWGROUP_NV,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 0,
+ },
+ .la = {
+ .reg = 0x338,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x13,
+ },
+ }, {
+ .id = 0x21,
+ .name = "texsrd2",
+ .swgroup = TEGRA_SWGROUP_NV2,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 1,
+ },
+ .la = {
+ .reg = 0x340,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x13,
+ },
+ }, {
+ .id = 0x22,
+ .name = "vdebsevr",
+ .swgroup = TEGRA_SWGROUP_VDE,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 2,
+ },
+ .la = {
+ .reg = 0x354,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xff,
+ },
+ }, {
+ .id = 0x23,
+ .name = "vdember",
+ .swgroup = TEGRA_SWGROUP_VDE,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 3,
+ },
+ .la = {
+ .reg = 0x354,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xd0,
+ },
+ }, {
+ .id = 0x24,
+ .name = "vdemcer",
+ .swgroup = TEGRA_SWGROUP_VDE,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 4,
+ },
+ .la = {
+ .reg = 0x358,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x2a,
+ },
+ }, {
+ .id = 0x25,
+ .name = "vdetper",
+ .swgroup = TEGRA_SWGROUP_VDE,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 5,
+ },
+ .la = {
+ .reg = 0x358,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x74,
+ },
+ }, {
+ .id = 0x26,
+ .name = "mpcorelpr",
+ .swgroup = TEGRA_SWGROUP_MPCORELP,
+ .la = {
+ .reg = 0x324,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x04,
+ },
+ }, {
+ .id = 0x27,
+ .name = "mpcorer",
+ .swgroup = TEGRA_SWGROUP_MPCORE,
+ .la = {
+ .reg = 0x320,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x04,
+ },
+ }, {
+ .id = 0x28,
+ .name = "eppu",
+ .swgroup = TEGRA_SWGROUP_EPP,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 8,
+ },
+ .la = {
+ .reg = 0x300,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x6c,
+ },
+ }, {
+ .id = 0x29,
+ .name = "eppv",
+ .swgroup = TEGRA_SWGROUP_EPP,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 9,
+ },
+ .la = {
+ .reg = 0x304,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x6c,
+ },
+ }, {
+ .id = 0x2a,
+ .name = "eppy",
+ .swgroup = TEGRA_SWGROUP_EPP,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 10,
+ },
+ .la = {
+ .reg = 0x304,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x6c,
+ },
+ }, {
+ .id = 0x2b,
+ .name = "mpeunifbw",
+ .swgroup = TEGRA_SWGROUP_MPE,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 11,
+ },
+ .la = {
+ .reg = 0x330,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x13,
+ },
+ }, {
+ .id = 0x2c,
+ .name = "viwsb",
+ .swgroup = TEGRA_SWGROUP_VI,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 12,
+ },
+ .la = {
+ .reg = 0x364,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x12,
+ },
+ }, {
+ .id = 0x2d,
+ .name = "viwu",
+ .swgroup = TEGRA_SWGROUP_VI,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 13,
+ },
+ .la = {
+ .reg = 0x368,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xb2,
+ },
+ }, {
+ .id = 0x2e,
+ .name = "viwv",
+ .swgroup = TEGRA_SWGROUP_VI,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 14,
+ },
+ .la = {
+ .reg = 0x368,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xb2,
+ },
+ }, {
+ .id = 0x2f,
+ .name = "viwy",
+ .swgroup = TEGRA_SWGROUP_VI,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 15,
+ },
+ .la = {
+ .reg = 0x36c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x12,
+ },
+ }, {
+ .id = 0x30,
+ .name = "g2dw",
+ .swgroup = TEGRA_SWGROUP_G2,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 16,
+ },
+ .la = {
+ .reg = 0x30c,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x9,
+ },
+ }, {
+ .id = 0x31,
+ .name = "afiw",
+ .swgroup = TEGRA_SWGROUP_AFI,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 17,
+ },
+ .la = {
+ .reg = 0x2e0,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x0c,
+ },
+ }, {
+ .id = 0x32,
+ .name = "avpcarm7w",
+ .swgroup = TEGRA_SWGROUP_AVPC,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 18,
+ },
+ .la = {
+ .reg = 0x2e4,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x0e,
+ },
+ }, {
+ .id = 0x33,
+ .name = "fdcdwr",
+ .swgroup = TEGRA_SWGROUP_NV,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 19,
+ },
+ .la = {
+ .reg = 0x338,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x0a,
+ },
+ }, {
+ .id = 0x34,
+ .name = "fdcwr2",
+ .swgroup = TEGRA_SWGROUP_NV2,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 20,
+ },
+ .la = {
+ .reg = 0x340,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x0a,
+ },
+ }, {
+ .id = 0x35,
+ .name = "hdaw",
+ .swgroup = TEGRA_SWGROUP_HDA,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 21,
+ },
+ .la = {
+ .reg = 0x318,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xff,
+ },
+ }, {
+ .id = 0x36,
+ .name = "host1xw",
+ .swgroup = TEGRA_SWGROUP_HC,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 22,
+ },
+ .la = {
+ .reg = 0x314,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x10,
+ },
+ }, {
+ .id = 0x37,
+ .name = "ispw",
+ .swgroup = TEGRA_SWGROUP_ISP,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 23,
+ },
+ .la = {
+ .reg = 0x31c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xff,
+ },
+ }, {
+ .id = 0x38,
+ .name = "mpcorelpw",
+ .swgroup = TEGRA_SWGROUP_MPCORELP,
+ .la = {
+ .reg = 0x324,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x0e,
+ },
+ }, {
+ .id = 0x39,
+ .name = "mpcorew",
+ .swgroup = TEGRA_SWGROUP_MPCORE,
+ .la = {
+ .reg = 0x320,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x0e,
+ },
+ }, {
+ .id = 0x3a,
+ .name = "mpecswr",
+ .swgroup = TEGRA_SWGROUP_MPE,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 26,
+ },
+ .la = {
+ .reg = 0x330,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xff,
+ },
+ }, {
+ .id = 0x3b,
+ .name = "ppcsahbdmaw",
+ .swgroup = TEGRA_SWGROUP_PPCS,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 27,
+ },
+ .la = {
+ .reg = 0x348,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x10,
+ },
+ }, {
+ .id = 0x3c,
+ .name = "ppcsahbslvw",
+ .swgroup = TEGRA_SWGROUP_PPCS,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 28,
+ },
+ .la = {
+ .reg = 0x348,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x06,
+ },
+ }, {
+ .id = 0x3d,
+ .name = "sataw",
+ .swgroup = TEGRA_SWGROUP_SATA,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 29,
+ },
+ .la = {
+ .reg = 0x350,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x33,
+ },
+ }, {
+ .id = 0x3e,
+ .name = "vdebsevw",
+ .swgroup = TEGRA_SWGROUP_VDE,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 30,
+ },
+ .la = {
+ .reg = 0x35c,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0xff,
+ },
+ }, {
+ .id = 0x3f,
+ .name = "vdedbgw",
+ .swgroup = TEGRA_SWGROUP_VDE,
+ .smmu = {
+ .reg = 0x22c,
+ .bit = 31,
+ },
+ .la = {
+ .reg = 0x35c,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0xff,
+ },
+ }, {
+ .id = 0x40,
+ .name = "vdembew",
+ .swgroup = TEGRA_SWGROUP_VDE,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 0,
+ },
+ .la = {
+ .reg = 0x360,
+ .shift = 0,
+ .mask = 0xff,
+ .def = 0x42,
+ },
+ }, {
+ .id = 0x41,
+ .name = "vdetpmw",
+ .swgroup = TEGRA_SWGROUP_VDE,
+ .smmu = {
+ .reg = 0x230,
+ .bit = 1,
+ },
+ .la = {
+ .reg = 0x360,
+ .shift = 16,
+ .mask = 0xff,
+ .def = 0x2a,
+ },
+ },
+};
+
+static const struct tegra_smmu_swgroup tegra30_swgroups[] = {
+ { .swgroup = TEGRA_SWGROUP_DC, .reg = 0x240 },
+ { .swgroup = TEGRA_SWGROUP_DCB, .reg = 0x244 },
+ { .swgroup = TEGRA_SWGROUP_EPP, .reg = 0x248 },
+ { .swgroup = TEGRA_SWGROUP_G2, .reg = 0x24c },
+ { .swgroup = TEGRA_SWGROUP_MPE, .reg = 0x264 },
+ { .swgroup = TEGRA_SWGROUP_VI, .reg = 0x280 },
+ { .swgroup = TEGRA_SWGROUP_AFI, .reg = 0x238 },
+ { .swgroup = TEGRA_SWGROUP_AVPC, .reg = 0x23c },
+ { .swgroup = TEGRA_SWGROUP_NV, .reg = 0x268 },
+ { .swgroup = TEGRA_SWGROUP_NV2, .reg = 0x26c },
+ { .swgroup = TEGRA_SWGROUP_HDA, .reg = 0x254 },
+ { .swgroup = TEGRA_SWGROUP_HC, .reg = 0x250 },
+ { .swgroup = TEGRA_SWGROUP_PPCS, .reg = 0x270 },
+ { .swgroup = TEGRA_SWGROUP_SATA, .reg = 0x278 },
+ { .swgroup = TEGRA_SWGROUP_VDE, .reg = 0x27c },
+ { .swgroup = TEGRA_SWGROUP_ISP, .reg = 0x258 },
+};
+
+static void tegra30_flush_dcache(struct page *page, unsigned long offset,
+ size_t size)
+{
+ phys_addr_t phys = page_to_phys(page) + offset;
+ void *virt = page_address(page) + offset;
+
+ __cpuc_flush_dcache_area(virt, size);
+ outer_flush_range(phys, phys + size);
+}
+
+static const struct tegra_smmu_ops tegra30_smmu_ops = {
+ .flush_dcache = tegra30_flush_dcache,
+};
+
+static const struct tegra_smmu_soc tegra30_smmu_soc = {
+ .clients = tegra30_mc_clients,
+ .num_clients = ARRAY_SIZE(tegra30_mc_clients),
+ .swgroups = tegra30_swgroups,
+ .num_swgroups = ARRAY_SIZE(tegra30_swgroups),
+ .supports_round_robin_arbitration = false,
+ .supports_request_limit = false,
+ .num_asids = 4,
+ .ops = &tegra30_smmu_ops,
+};
+
+const struct tegra_mc_soc tegra30_mc_soc = {
+ .clients = tegra30_mc_clients,
+ .num_clients = ARRAY_SIZE(tegra30_mc_clients),
+ .num_address_bits = 32,
+ .atom_size = 16,
+ .smmu = &tegra30_smmu_soc,
+};
+++ /dev/null
-/*
- * Tegra30 Memory Controller
- *
- * Copyright (c) 2012, NVIDIA CORPORATION. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/err.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/ratelimit.h>
-#include <linux/platform_device.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-
-#define DRV_NAME "tegra30-mc"
-
-#define MC_INTSTATUS 0x0
-#define MC_INTMASK 0x4
-
-#define MC_INT_ERR_SHIFT 6
-#define MC_INT_ERR_MASK (0x1f << MC_INT_ERR_SHIFT)
-#define MC_INT_DECERR_EMEM BIT(MC_INT_ERR_SHIFT)
-#define MC_INT_SECURITY_VIOLATION BIT(MC_INT_ERR_SHIFT + 2)
-#define MC_INT_ARBITRATION_EMEM BIT(MC_INT_ERR_SHIFT + 3)
-#define MC_INT_INVALID_SMMU_PAGE BIT(MC_INT_ERR_SHIFT + 4)
-
-#define MC_ERR_STATUS 0x8
-#define MC_ERR_ADR 0xc
-
-#define MC_ERR_TYPE_SHIFT 28
-#define MC_ERR_TYPE_MASK (7 << MC_ERR_TYPE_SHIFT)
-#define MC_ERR_TYPE_DECERR_EMEM 2
-#define MC_ERR_TYPE_SECURITY_TRUSTZONE 3
-#define MC_ERR_TYPE_SECURITY_CARVEOUT 4
-#define MC_ERR_TYPE_INVALID_SMMU_PAGE 6
-
-#define MC_ERR_INVALID_SMMU_PAGE_SHIFT 25
-#define MC_ERR_INVALID_SMMU_PAGE_MASK (7 << MC_ERR_INVALID_SMMU_PAGE_SHIFT)
-#define MC_ERR_RW_SHIFT 16
-#define MC_ERR_RW BIT(MC_ERR_RW_SHIFT)
-#define MC_ERR_SECURITY BIT(MC_ERR_RW_SHIFT + 1)
-
-#define SECURITY_VIOLATION_TYPE BIT(30) /* 0=TRUSTZONE, 1=CARVEOUT */
-
-#define MC_EMEM_ARB_CFG 0x90
-#define MC_EMEM_ARB_OUTSTANDING_REQ 0x94
-#define MC_EMEM_ARB_TIMING_RCD 0x98
-#define MC_EMEM_ARB_TIMING_RP 0x9c
-#define MC_EMEM_ARB_TIMING_RC 0xa0
-#define MC_EMEM_ARB_TIMING_RAS 0xa4
-#define MC_EMEM_ARB_TIMING_FAW 0xa8
-#define MC_EMEM_ARB_TIMING_RRD 0xac
-#define MC_EMEM_ARB_TIMING_RAP2PRE 0xb0
-#define MC_EMEM_ARB_TIMING_WAP2PRE 0xb4
-#define MC_EMEM_ARB_TIMING_R2R 0xb8
-#define MC_EMEM_ARB_TIMING_W2W 0xbc
-#define MC_EMEM_ARB_TIMING_R2W 0xc0
-#define MC_EMEM_ARB_TIMING_W2R 0xc4
-
-#define MC_EMEM_ARB_DA_TURNS 0xd0
-#define MC_EMEM_ARB_DA_COVERS 0xd4
-#define MC_EMEM_ARB_MISC0 0xd8
-#define MC_EMEM_ARB_MISC1 0xdc
-
-#define MC_EMEM_ARB_RING3_THROTTLE 0xe4
-#define MC_EMEM_ARB_OVERRIDE 0xe8
-
-#define MC_TIMING_CONTROL 0xfc
-
-#define MC_CLIENT_ID_MASK 0x7f
-
-#define NUM_MC_REG_BANKS 4
-
-struct tegra30_mc {
- void __iomem *regs[NUM_MC_REG_BANKS];
- struct device *dev;
- u32 ctx[0];
-};
-
-static inline u32 mc_readl(struct tegra30_mc *mc, u32 offs)
-{
- u32 val = 0;
-
- if (offs < 0x10)
- val = readl(mc->regs[0] + offs);
- else if (offs < 0x1f0)
- val = readl(mc->regs[1] + offs - 0x3c);
- else if (offs < 0x228)
- val = readl(mc->regs[2] + offs - 0x200);
- else if (offs < 0x400)
- val = readl(mc->regs[3] + offs - 0x284);
-
- return val;
-}
-
-static inline void mc_writel(struct tegra30_mc *mc, u32 val, u32 offs)
-{
- if (offs < 0x10)
- writel(val, mc->regs[0] + offs);
- else if (offs < 0x1f0)
- writel(val, mc->regs[1] + offs - 0x3c);
- else if (offs < 0x228)
- writel(val, mc->regs[2] + offs - 0x200);
- else if (offs < 0x400)
- writel(val, mc->regs[3] + offs - 0x284);
-}
-
-static const char * const tegra30_mc_client[] = {
- "csr_ptcr",
- "cbr_display0a",
- "cbr_display0ab",
- "cbr_display0b",
- "cbr_display0bb",
- "cbr_display0c",
- "cbr_display0cb",
- "cbr_display1b",
- "cbr_display1bb",
- "cbr_eppup",
- "cbr_g2pr",
- "cbr_g2sr",
- "cbr_mpeunifbr",
- "cbr_viruv",
- "csr_afir",
- "csr_avpcarm7r",
- "csr_displayhc",
- "csr_displayhcb",
- "csr_fdcdrd",
- "csr_fdcdrd2",
- "csr_g2dr",
- "csr_hdar",
- "csr_host1xdmar",
- "csr_host1xr",
- "csr_idxsrd",
- "csr_idxsrd2",
- "csr_mpe_ipred",
- "csr_mpeamemrd",
- "csr_mpecsrd",
- "csr_ppcsahbdmar",
- "csr_ppcsahbslvr",
- "csr_satar",
- "csr_texsrd",
- "csr_texsrd2",
- "csr_vdebsevr",
- "csr_vdember",
- "csr_vdemcer",
- "csr_vdetper",
- "csr_mpcorelpr",
- "csr_mpcorer",
- "cbw_eppu",
- "cbw_eppv",
- "cbw_eppy",
- "cbw_mpeunifbw",
- "cbw_viwsb",
- "cbw_viwu",
- "cbw_viwv",
- "cbw_viwy",
- "ccw_g2dw",
- "csw_afiw",
- "csw_avpcarm7w",
- "csw_fdcdwr",
- "csw_fdcdwr2",
- "csw_hdaw",
- "csw_host1xw",
- "csw_ispw",
- "csw_mpcorelpw",
- "csw_mpcorew",
- "csw_mpecswr",
- "csw_ppcsahbdmaw",
- "csw_ppcsahbslvw",
- "csw_sataw",
- "csw_vdebsevw",
- "csw_vdedbgw",
- "csw_vdembew",
- "csw_vdetpmw",
-};
-
-static void tegra30_mc_decode(struct tegra30_mc *mc, int n)
-{
- u32 err, addr;
- const char * const mc_int_err[] = {
- "MC_DECERR",
- "Unknown",
- "MC_SECURITY_ERR",
- "MC_ARBITRATION_EMEM",
- "MC_SMMU_ERR",
- };
- const char * const err_type[] = {
- "Unknown",
- "Unknown",
- "DECERR_EMEM",
- "SECURITY_TRUSTZONE",
- "SECURITY_CARVEOUT",
- "Unknown",
- "INVALID_SMMU_PAGE",
- "Unknown",
- };
- char attr[6];
- int cid, perm, type, idx;
- const char *client = "Unknown";
-
- idx = n - MC_INT_ERR_SHIFT;
- if ((idx < 0) || (idx >= ARRAY_SIZE(mc_int_err)) || (idx == 1)) {
- dev_err_ratelimited(mc->dev, "Unknown interrupt status %08lx\n",
- BIT(n));
- return;
- }
-
- err = mc_readl(mc, MC_ERR_STATUS);
-
- type = (err & MC_ERR_TYPE_MASK) >> MC_ERR_TYPE_SHIFT;
- perm = (err & MC_ERR_INVALID_SMMU_PAGE_MASK) >>
- MC_ERR_INVALID_SMMU_PAGE_SHIFT;
- if (type == MC_ERR_TYPE_INVALID_SMMU_PAGE)
- sprintf(attr, "%c-%c-%c",
- (perm & BIT(2)) ? 'R' : '-',
- (perm & BIT(1)) ? 'W' : '-',
- (perm & BIT(0)) ? 'S' : '-');
- else
- attr[0] = '\0';
-
- cid = err & MC_CLIENT_ID_MASK;
- if (cid < ARRAY_SIZE(tegra30_mc_client))
- client = tegra30_mc_client[cid];
-
- addr = mc_readl(mc, MC_ERR_ADR);
-
- dev_err_ratelimited(mc->dev, "%s (0x%08x): 0x%08x %s (%s %s %s %s)\n",
- mc_int_err[idx], err, addr, client,
- (err & MC_ERR_SECURITY) ? "secure" : "non-secure",
- (err & MC_ERR_RW) ? "write" : "read",
- err_type[type], attr);
-}
-
-static const u32 tegra30_mc_ctx[] = {
- MC_EMEM_ARB_CFG,
- MC_EMEM_ARB_OUTSTANDING_REQ,
- MC_EMEM_ARB_TIMING_RCD,
- MC_EMEM_ARB_TIMING_RP,
- MC_EMEM_ARB_TIMING_RC,
- MC_EMEM_ARB_TIMING_RAS,
- MC_EMEM_ARB_TIMING_FAW,
- MC_EMEM_ARB_TIMING_RRD,
- MC_EMEM_ARB_TIMING_RAP2PRE,
- MC_EMEM_ARB_TIMING_WAP2PRE,
- MC_EMEM_ARB_TIMING_R2R,
- MC_EMEM_ARB_TIMING_W2W,
- MC_EMEM_ARB_TIMING_R2W,
- MC_EMEM_ARB_TIMING_W2R,
- MC_EMEM_ARB_DA_TURNS,
- MC_EMEM_ARB_DA_COVERS,
- MC_EMEM_ARB_MISC0,
- MC_EMEM_ARB_MISC1,
- MC_EMEM_ARB_RING3_THROTTLE,
- MC_EMEM_ARB_OVERRIDE,
- MC_INTMASK,
-};
-
-#ifdef CONFIG_PM
-static int tegra30_mc_suspend(struct device *dev)
-{
- int i;
- struct tegra30_mc *mc = dev_get_drvdata(dev);
-
- for (i = 0; i < ARRAY_SIZE(tegra30_mc_ctx); i++)
- mc->ctx[i] = mc_readl(mc, tegra30_mc_ctx[i]);
- return 0;
-}
-
-static int tegra30_mc_resume(struct device *dev)
-{
- int i;
- struct tegra30_mc *mc = dev_get_drvdata(dev);
-
- for (i = 0; i < ARRAY_SIZE(tegra30_mc_ctx); i++)
- mc_writel(mc, mc->ctx[i], tegra30_mc_ctx[i]);
-
- mc_writel(mc, 1, MC_TIMING_CONTROL);
- /* Read-back to ensure that write reached */
- mc_readl(mc, MC_TIMING_CONTROL);
- return 0;
-}
-#endif
-
-static UNIVERSAL_DEV_PM_OPS(tegra30_mc_pm,
- tegra30_mc_suspend,
- tegra30_mc_resume, NULL);
-
-static const struct of_device_id tegra30_mc_of_match[] = {
- { .compatible = "nvidia,tegra30-mc", },
- {},
-};
-
-static irqreturn_t tegra30_mc_isr(int irq, void *data)
-{
- u32 stat, mask, bit;
- struct tegra30_mc *mc = data;
-
- stat = mc_readl(mc, MC_INTSTATUS);
- mask = mc_readl(mc, MC_INTMASK);
- mask &= stat;
- if (!mask)
- return IRQ_NONE;
- while ((bit = ffs(mask)) != 0) {
- tegra30_mc_decode(mc, bit - 1);
- mask &= ~BIT(bit - 1);
- }
-
- mc_writel(mc, stat, MC_INTSTATUS);
- return IRQ_HANDLED;
-}
-
-static int tegra30_mc_probe(struct platform_device *pdev)
-{
- struct resource *irq;
- struct tegra30_mc *mc;
- size_t bytes;
- int err, i;
- u32 intmask;
-
- bytes = sizeof(*mc) + sizeof(u32) * ARRAY_SIZE(tegra30_mc_ctx);
- mc = devm_kzalloc(&pdev->dev, bytes, GFP_KERNEL);
- if (!mc)
- return -ENOMEM;
- mc->dev = &pdev->dev;
-
- for (i = 0; i < ARRAY_SIZE(mc->regs); i++) {
- struct resource *res;
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, i);
- mc->regs[i] = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(mc->regs[i]))
- return PTR_ERR(mc->regs[i]);
- }
-
- irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!irq)
- return -ENODEV;
- err = devm_request_irq(&pdev->dev, irq->start, tegra30_mc_isr,
- IRQF_SHARED, dev_name(&pdev->dev), mc);
- if (err)
- return -ENODEV;
-
- platform_set_drvdata(pdev, mc);
-
- intmask = MC_INT_INVALID_SMMU_PAGE |
- MC_INT_DECERR_EMEM | MC_INT_SECURITY_VIOLATION;
- mc_writel(mc, intmask, MC_INTMASK);
- return 0;
-}
-
-static struct platform_driver tegra30_mc_driver = {
- .probe = tegra30_mc_probe,
- .driver = {
- .name = DRV_NAME,
- .owner = THIS_MODULE,
- .of_match_table = tegra30_mc_of_match,
- .pm = &tegra30_mc_pm,
- },
-};
-module_platform_driver(tegra30_mc_driver);
-
-MODULE_AUTHOR("Hiroshi DOYU <hdoyu@nvidia.com>");
-MODULE_DESCRIPTION("Tegra30 MC driver");
-MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:" DRV_NAME);
.cmd_per_lun = 7,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = mptscsih_host_attrs,
+ .use_blk_tags = 1,
};
static int mptsas_get_linkerrors(struct sas_phy *phy)
* mptscsih_change_queue_depth - This function will set a devices queue depth
* @sdev: per scsi_device pointer
* @qdepth: requested queue depth
- * @reason: calling context
*
* Adding support for new 'change_queue_depth' api.
*/
int
-mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
+mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
{
MPT_SCSI_HOST *hd = shost_priv(sdev->host);
VirtTarget *vtarget;
struct scsi_target *starget;
int max_depth;
- int tagged;
MPT_ADAPTER *ioc = hd->ioc;
starget = scsi_target(sdev);
vtarget = starget->hostdata;
- if (reason != SCSI_QDEPTH_DEFAULT)
- return -EOPNOTSUPP;
-
if (ioc->bus_type == SPI) {
if (!(vtarget->tflags & MPT_TARGET_FLAGS_Q_YES))
max_depth = 1;
if (qdepth > max_depth)
qdepth = max_depth;
- if (qdepth == 1)
- tagged = 0;
- else
- tagged = MSG_SIMPLE_TAG;
- scsi_adjust_queue_depth(sdev, tagged, qdepth);
- return sdev->queue_depth;
+ return scsi_change_queue_depth(sdev, qdepth);
}
/*
ioc->name, vtarget->negoFlags, vtarget->maxOffset,
vtarget->minSyncFactor));
- mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH,
- SCSI_QDEPTH_DEFAULT);
+ mptscsih_change_queue_depth(sdev, MPT_SCSI_CMD_PER_DEV_HIGH);
dsprintk(ioc, printk(MYIOC_s_DEBUG_FMT
- "tagged %d, simple %d, ordered %d\n",
- ioc->name,sdev->tagged_supported, sdev->simple_tags,
- sdev->ordered_tags));
+ "tagged %d, simple %d\n",
+ ioc->name,sdev->tagged_supported, sdev->simple_tags));
blk_queue_dma_alignment (sdev->request_queue, 512 - 1);
extern int mptscsih_scandv_complete(MPT_ADAPTER *ioc, MPT_FRAME_HDR *mf, MPT_FRAME_HDR *r);
extern int mptscsih_event_process(MPT_ADAPTER *ioc, EventNotificationReply_t *pEvReply);
extern int mptscsih_ioc_reset(MPT_ADAPTER *ioc, int post_reset);
-extern int mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth,
- int reason);
+extern int mptscsih_change_queue_depth(struct scsi_device *sdev, int qdepth);
extern u8 mptscsih_raid_id_to_num(MPT_ADAPTER *ioc, u8 channel, u8 id);
extern int mptscsih_is_phys_disk(MPT_ADAPTER *ioc, u8 channel, u8 id);
extern struct device_attribute *mptscsih_host_attrs[];
additional drivers must be enabled in order to use the
functionality of the device.
+config MFD_ATMEL_HLCDC
+ tristate "Atmel HLCDC (High-end LCD Controller)"
+ select MFD_CORE
+ select REGMAP_MMIO
+ depends on OF
+ help
+ If you say yes here you get support for the HLCDC block.
+ This driver provides common support for accessing the device,
+ additional drivers must be enabled in order to use the
+ functionality of the device.
+
config MFD_BCM590XX
tristate "Broadcom BCM590xx PMUs"
select MFD_CORE
select REGMAP_IRQ
depends on I2C=y
help
- If you say Y here you get support for the X-Powers AXP202 and AXP209.
+ If you say Y here you get support for the X-Powers AXP202, AXP209 and
+ AXP288 power management IC (PMIC).
This driver include only the core APIs. You have to select individual
components like regulators or the PEK (Power Enable Key) under the
corresponding menus.
Additional drivers must be enabled in order to use the functionality
of the device.
+config MFD_DLN2
+ tristate "Diolan DLN2 support"
+ select MFD_CORE
+ depends on USB
+ help
+ This adds support for Diolan USB-I2C/SPI/GPIO Master Adapter
+ DLN-2. Additional drivers such as I2C_DLN2, GPIO_DLN2,
+ etc. must be enabled in order to use the functionality of
+ the device.
+
config MFD_MC13XXX
tristate
depends on (SPI_MASTER || I2C)
select MFD_CORE
select REGMAP_I2C
select REGMAP_IRQ
- select REGULATOR
help
Support for the Samsung Electronics MFD series.
This driver provides common support for accessing the device,
obj-$(CONFIG_MFD_CROS_EC_I2C) += cros_ec_i2c.o
obj-$(CONFIG_MFD_CROS_EC_SPI) += cros_ec_spi.o
-rtsx_pci-objs := rtsx_pcr.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o
+rtsx_pci-objs := rtsx_pcr.o rtsx_gops.o rts5209.o rts5229.o rtl8411.o rts5227.o rts5249.o
obj-$(CONFIG_MFD_RTSX_PCI) += rtsx_pci.o
obj-$(CONFIG_MFD_RTSX_USB) += rtsx_usb.o
obj-$(CONFIG_TPS65911_COMPARATOR) += tps65911-comparator.o
obj-$(CONFIG_MFD_TPS65090) += tps65090.o
obj-$(CONFIG_MFD_AAT2870_CORE) += aat2870-core.o
+obj-$(CONFIG_MFD_ATMEL_HLCDC) += atmel-hlcdc.o
obj-$(CONFIG_MFD_INTEL_MSIC) += intel_msic.o
obj-$(CONFIG_MFD_PALMAS) += palmas.o
obj-$(CONFIG_MFD_VIPERBOARD) += viperboard.o
obj-$(CONFIG_MFD_IPAQ_MICRO) += ipaq-micro.o
obj-$(CONFIG_MFD_MENF21BMC) += menf21bmc.o
obj-$(CONFIG_MFD_HI6421_PMIC) += hi6421-pmic-core.o
+obj-$(CONFIG_MFD_DLN2) += dln2.o
intel-soc-pmic-objs := intel_soc_pmic_core.o intel_soc_pmic_crc.o
obj-$(CONFIG_INTEL_SOC_PMIC) += intel-soc-pmic.o
}
}
-/*
- * Use the AB WD to reset the platform. It will perform a hard
- * reset instead of a soft reset. Write the reset reason to
- * the AB before reset, which can be read upon restart.
- */
-void ab8500_restart(char mode, const char *cmd)
-{
- struct ab8500_platform_data *plat;
- struct ab8500_sysctrl_platform_data *pdata;
- u16 reason = 0;
- u8 val;
-
- if (sysctrl_dev == NULL) {
- pr_err("%s: sysctrl not initialized\n", __func__);
- return;
- }
-
- plat = dev_get_platdata(sysctrl_dev->parent);
- pdata = plat->sysctrl;
- if (pdata && pdata->reboot_reason_code)
- reason = pdata->reboot_reason_code(cmd);
- else
- pr_warn("[%s] No reboot reason set. Default reason %d\n",
- __func__, reason);
-
- /*
- * Disable RTC alarm, just a precaution so that no alarm
- * is running when WD reset is executed.
- */
- abx500_get_register_interruptible(sysctrl_dev, AB8500_RTC,
- RTC_CTRL , &val);
- abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
- RTC_CTRL , (val & ~RTC_ALARM_ENABLE));
-
- /*
- * Android is not using the RTC alarm registers during reboot
- * so we borrow them for writing the reason of reset
- */
-
- /* reason[8 LSB] */
- val = reason & 0xFF;
- abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
- AB8500_ALARM_MIN_LOW , val);
-
- /* reason[8 MSB] */
- val = (reason>>8) & 0xFF;
- abx500_set_register_interruptible(sysctrl_dev, AB8500_RTC,
- AB8500_ALARM_MIN_MID , val);
-
- /* Setting WD timeout to 0 */
- ab8500_sysctrl_write(AB8500_MAINWDOGTIMER, 0xFF, 0x0);
-
- /* Setting the parameters to AB8500 WD*/
- ab8500_sysctrl_write(AB8500_MAINWDOGCTRL, 0xFF, (AB8500_ENABLE_WD |
- AB8500_WD_RESTART_ON_EXPIRE | AB8500_KICK_WD));
-}
-
static inline bool valid_bank(u8 bank)
{
return ((bank == AB8500_SYS_CTRL1_BLOCK) ||
static int arizona_spi_remove(struct spi_device *spi)
{
struct arizona *arizona = spi_get_drvdata(spi);
+
arizona_dev_exit(arizona);
+
return 0;
}
--- /dev/null
+/*
+ * Copyright (C) 2014 Free Electrons
+ * Copyright (C) 2014 Atmel
+ *
+ * Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/clk.h>
+#include <linux/mfd/atmel-hlcdc.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#define ATMEL_HLCDC_REG_MAX (0x4000 - 0x4)
+
+static const struct mfd_cell atmel_hlcdc_cells[] = {
+ {
+ .name = "atmel-hlcdc-pwm",
+ .of_compatible = "atmel,hlcdc-pwm",
+ },
+ {
+ .name = "atmel-hlcdc-dc",
+ .of_compatible = "atmel,hlcdc-display-controller",
+ },
+};
+
+static const struct regmap_config atmel_hlcdc_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+ .max_register = ATMEL_HLCDC_REG_MAX,
+};
+
+static int atmel_hlcdc_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct atmel_hlcdc *hlcdc;
+ struct resource *res;
+ void __iomem *regs;
+
+ hlcdc = devm_kzalloc(dev, sizeof(*hlcdc), GFP_KERNEL);
+ if (!hlcdc)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ regs = devm_ioremap_resource(dev, res);
+ if (IS_ERR(regs))
+ return PTR_ERR(regs);
+
+ hlcdc->irq = platform_get_irq(pdev, 0);
+ if (hlcdc->irq < 0)
+ return hlcdc->irq;
+
+ hlcdc->periph_clk = devm_clk_get(dev, "periph_clk");
+ if (IS_ERR(hlcdc->periph_clk)) {
+ dev_err(dev, "failed to get peripheral clock\n");
+ return PTR_ERR(hlcdc->periph_clk);
+ }
+
+ hlcdc->sys_clk = devm_clk_get(dev, "sys_clk");
+ if (IS_ERR(hlcdc->sys_clk)) {
+ dev_err(dev, "failed to get system clock\n");
+ return PTR_ERR(hlcdc->sys_clk);
+ }
+
+ hlcdc->slow_clk = devm_clk_get(dev, "slow_clk");
+ if (IS_ERR(hlcdc->slow_clk)) {
+ dev_err(dev, "failed to get slow clock\n");
+ return PTR_ERR(hlcdc->slow_clk);
+ }
+
+ hlcdc->regmap = devm_regmap_init_mmio(dev, regs,
+ &atmel_hlcdc_regmap_config);
+ if (IS_ERR(hlcdc->regmap))
+ return PTR_ERR(hlcdc->regmap);
+
+ dev_set_drvdata(dev, hlcdc);
+
+ return mfd_add_devices(dev, -1, atmel_hlcdc_cells,
+ ARRAY_SIZE(atmel_hlcdc_cells),
+ NULL, 0, NULL);
+}
+
+static int atmel_hlcdc_remove(struct platform_device *pdev)
+{
+ mfd_remove_devices(&pdev->dev);
+
+ return 0;
+}
+
+static const struct of_device_id atmel_hlcdc_match[] = {
+ { .compatible = "atmel,sama5d3-hlcdc" },
+ { /* sentinel */ },
+};
+
+static struct platform_driver atmel_hlcdc_driver = {
+ .probe = atmel_hlcdc_probe,
+ .remove = atmel_hlcdc_remove,
+ .driver = {
+ .name = "atmel-hlcdc",
+ .of_match_table = atmel_hlcdc_match,
+ },
+};
+module_platform_driver(atmel_hlcdc_driver);
+
+MODULE_ALIAS("platform:atmel-hlcdc");
+MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com>");
+MODULE_DESCRIPTION("Atmel HLCDC driver");
+MODULE_LICENSE("GPL v2");
/*
- * axp20x.c - MFD core driver for the X-Powers AXP202 and AXP209
+ * axp20x.c - MFD core driver for the X-Powers' Power Management ICs
*
- * AXP20x comprises an adaptive USB-Compatible PWM charger, 2 BUCK DC-DC
- * converters, 5 LDOs, multiple 12-bit ADCs of voltage, current and temperature
- * as well as 4 configurable GPIOs.
+ * AXP20x typically comprises an adaptive USB-Compatible PWM charger, BUCK DC-DC
+ * converters, LDOs, multiple 12-bit ADCs of voltage, current and temperature
+ * as well as configurable GPIOs.
*
* Author: Carlo Caione <carlo@caione.org>
*
#include <linux/mfd/core.h>
#include <linux/of_device.h>
#include <linux/of_irq.h>
+#include <linux/acpi.h>
#define AXP20X_OFF 0x80
+static const char const *axp20x_model_names[] = {
+ "AXP202",
+ "AXP209",
+ "AXP288",
+};
+
static const struct regmap_range axp20x_writeable_ranges[] = {
regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES),
.n_yes_ranges = ARRAY_SIZE(axp20x_volatile_ranges),
};
+static const struct regmap_range axp288_writeable_ranges[] = {
+ regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ6_STATE),
+ regmap_reg_range(AXP20X_DCDC_MODE, AXP288_FG_TUNE5),
+};
+
+static const struct regmap_range axp288_volatile_ranges[] = {
+ regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IPSOUT_V_HIGH_L),
+};
+
+static const struct regmap_access_table axp288_writeable_table = {
+ .yes_ranges = axp288_writeable_ranges,
+ .n_yes_ranges = ARRAY_SIZE(axp288_writeable_ranges),
+};
+
+static const struct regmap_access_table axp288_volatile_table = {
+ .yes_ranges = axp288_volatile_ranges,
+ .n_yes_ranges = ARRAY_SIZE(axp288_volatile_ranges),
+};
+
static struct resource axp20x_pek_resources[] = {
{
.name = "PEK_DBR",
},
};
+static struct resource axp288_battery_resources[] = {
+ {
+ .start = AXP288_IRQ_QWBTU,
+ .end = AXP288_IRQ_QWBTU,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_WBTU,
+ .end = AXP288_IRQ_WBTU,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_QWBTO,
+ .end = AXP288_IRQ_QWBTO,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_WBTO,
+ .end = AXP288_IRQ_WBTO,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_WL2,
+ .end = AXP288_IRQ_WL2,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_WL1,
+ .end = AXP288_IRQ_WL1,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static const struct regmap_config axp20x_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
.cache_type = REGCACHE_RBTREE,
};
-#define AXP20X_IRQ(_irq, _off, _mask) \
- [AXP20X_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) }
+static const struct regmap_config axp288_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .wr_table = &axp288_writeable_table,
+ .volatile_table = &axp288_volatile_table,
+ .max_register = AXP288_FG_TUNE5,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+#define INIT_REGMAP_IRQ(_variant, _irq, _off, _mask) \
+ [_variant##_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) }
static const struct regmap_irq axp20x_regmap_irqs[] = {
- AXP20X_IRQ(ACIN_OVER_V, 0, 7),
- AXP20X_IRQ(ACIN_PLUGIN, 0, 6),
- AXP20X_IRQ(ACIN_REMOVAL, 0, 5),
- AXP20X_IRQ(VBUS_OVER_V, 0, 4),
- AXP20X_IRQ(VBUS_PLUGIN, 0, 3),
- AXP20X_IRQ(VBUS_REMOVAL, 0, 2),
- AXP20X_IRQ(VBUS_V_LOW, 0, 1),
- AXP20X_IRQ(BATT_PLUGIN, 1, 7),
- AXP20X_IRQ(BATT_REMOVAL, 1, 6),
- AXP20X_IRQ(BATT_ENT_ACT_MODE, 1, 5),
- AXP20X_IRQ(BATT_EXIT_ACT_MODE, 1, 4),
- AXP20X_IRQ(CHARG, 1, 3),
- AXP20X_IRQ(CHARG_DONE, 1, 2),
- AXP20X_IRQ(BATT_TEMP_HIGH, 1, 1),
- AXP20X_IRQ(BATT_TEMP_LOW, 1, 0),
- AXP20X_IRQ(DIE_TEMP_HIGH, 2, 7),
- AXP20X_IRQ(CHARG_I_LOW, 2, 6),
- AXP20X_IRQ(DCDC1_V_LONG, 2, 5),
- AXP20X_IRQ(DCDC2_V_LONG, 2, 4),
- AXP20X_IRQ(DCDC3_V_LONG, 2, 3),
- AXP20X_IRQ(PEK_SHORT, 2, 1),
- AXP20X_IRQ(PEK_LONG, 2, 0),
- AXP20X_IRQ(N_OE_PWR_ON, 3, 7),
- AXP20X_IRQ(N_OE_PWR_OFF, 3, 6),
- AXP20X_IRQ(VBUS_VALID, 3, 5),
- AXP20X_IRQ(VBUS_NOT_VALID, 3, 4),
- AXP20X_IRQ(VBUS_SESS_VALID, 3, 3),
- AXP20X_IRQ(VBUS_SESS_END, 3, 2),
- AXP20X_IRQ(LOW_PWR_LVL1, 3, 1),
- AXP20X_IRQ(LOW_PWR_LVL2, 3, 0),
- AXP20X_IRQ(TIMER, 4, 7),
- AXP20X_IRQ(PEK_RIS_EDGE, 4, 6),
- AXP20X_IRQ(PEK_FAL_EDGE, 4, 5),
- AXP20X_IRQ(GPIO3_INPUT, 4, 3),
- AXP20X_IRQ(GPIO2_INPUT, 4, 2),
- AXP20X_IRQ(GPIO1_INPUT, 4, 1),
- AXP20X_IRQ(GPIO0_INPUT, 4, 0),
+ INIT_REGMAP_IRQ(AXP20X, ACIN_OVER_V, 0, 7),
+ INIT_REGMAP_IRQ(AXP20X, ACIN_PLUGIN, 0, 6),
+ INIT_REGMAP_IRQ(AXP20X, ACIN_REMOVAL, 0, 5),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_OVER_V, 0, 4),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_PLUGIN, 0, 3),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_REMOVAL, 0, 2),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_V_LOW, 0, 1),
+ INIT_REGMAP_IRQ(AXP20X, BATT_PLUGIN, 1, 7),
+ INIT_REGMAP_IRQ(AXP20X, BATT_REMOVAL, 1, 6),
+ INIT_REGMAP_IRQ(AXP20X, BATT_ENT_ACT_MODE, 1, 5),
+ INIT_REGMAP_IRQ(AXP20X, BATT_EXIT_ACT_MODE, 1, 4),
+ INIT_REGMAP_IRQ(AXP20X, CHARG, 1, 3),
+ INIT_REGMAP_IRQ(AXP20X, CHARG_DONE, 1, 2),
+ INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_HIGH, 1, 1),
+ INIT_REGMAP_IRQ(AXP20X, BATT_TEMP_LOW, 1, 0),
+ INIT_REGMAP_IRQ(AXP20X, DIE_TEMP_HIGH, 2, 7),
+ INIT_REGMAP_IRQ(AXP20X, CHARG_I_LOW, 2, 6),
+ INIT_REGMAP_IRQ(AXP20X, DCDC1_V_LONG, 2, 5),
+ INIT_REGMAP_IRQ(AXP20X, DCDC2_V_LONG, 2, 4),
+ INIT_REGMAP_IRQ(AXP20X, DCDC3_V_LONG, 2, 3),
+ INIT_REGMAP_IRQ(AXP20X, PEK_SHORT, 2, 1),
+ INIT_REGMAP_IRQ(AXP20X, PEK_LONG, 2, 0),
+ INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_ON, 3, 7),
+ INIT_REGMAP_IRQ(AXP20X, N_OE_PWR_OFF, 3, 6),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_VALID, 3, 5),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_NOT_VALID, 3, 4),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_VALID, 3, 3),
+ INIT_REGMAP_IRQ(AXP20X, VBUS_SESS_END, 3, 2),
+ INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL1, 3, 1),
+ INIT_REGMAP_IRQ(AXP20X, LOW_PWR_LVL2, 3, 0),
+ INIT_REGMAP_IRQ(AXP20X, TIMER, 4, 7),
+ INIT_REGMAP_IRQ(AXP20X, PEK_RIS_EDGE, 4, 6),
+ INIT_REGMAP_IRQ(AXP20X, PEK_FAL_EDGE, 4, 5),
+ INIT_REGMAP_IRQ(AXP20X, GPIO3_INPUT, 4, 3),
+ INIT_REGMAP_IRQ(AXP20X, GPIO2_INPUT, 4, 2),
+ INIT_REGMAP_IRQ(AXP20X, GPIO1_INPUT, 4, 1),
+ INIT_REGMAP_IRQ(AXP20X, GPIO0_INPUT, 4, 0),
+};
+
+/* some IRQs are compatible with axp20x models */
+static const struct regmap_irq axp288_regmap_irqs[] = {
+ INIT_REGMAP_IRQ(AXP288, VBUS_FALL, 0, 2),
+ INIT_REGMAP_IRQ(AXP288, VBUS_RISE, 0, 3),
+ INIT_REGMAP_IRQ(AXP288, OV, 0, 4),
+
+ INIT_REGMAP_IRQ(AXP288, DONE, 1, 2),
+ INIT_REGMAP_IRQ(AXP288, CHARGING, 1, 3),
+ INIT_REGMAP_IRQ(AXP288, SAFE_QUIT, 1, 4),
+ INIT_REGMAP_IRQ(AXP288, SAFE_ENTER, 1, 5),
+ INIT_REGMAP_IRQ(AXP288, ABSENT, 1, 6),
+ INIT_REGMAP_IRQ(AXP288, APPEND, 1, 7),
+
+ INIT_REGMAP_IRQ(AXP288, QWBTU, 2, 0),
+ INIT_REGMAP_IRQ(AXP288, WBTU, 2, 1),
+ INIT_REGMAP_IRQ(AXP288, QWBTO, 2, 2),
+ INIT_REGMAP_IRQ(AXP288, WBTO, 2, 3),
+ INIT_REGMAP_IRQ(AXP288, QCBTU, 2, 4),
+ INIT_REGMAP_IRQ(AXP288, CBTU, 2, 5),
+ INIT_REGMAP_IRQ(AXP288, QCBTO, 2, 6),
+ INIT_REGMAP_IRQ(AXP288, CBTO, 2, 7),
+
+ INIT_REGMAP_IRQ(AXP288, WL2, 3, 0),
+ INIT_REGMAP_IRQ(AXP288, WL1, 3, 1),
+ INIT_REGMAP_IRQ(AXP288, GPADC, 3, 2),
+ INIT_REGMAP_IRQ(AXP288, OT, 3, 7),
+
+ INIT_REGMAP_IRQ(AXP288, GPIO0, 4, 0),
+ INIT_REGMAP_IRQ(AXP288, GPIO1, 4, 1),
+ INIT_REGMAP_IRQ(AXP288, POKO, 4, 2),
+ INIT_REGMAP_IRQ(AXP288, POKL, 4, 3),
+ INIT_REGMAP_IRQ(AXP288, POKS, 4, 4),
+ INIT_REGMAP_IRQ(AXP288, POKN, 4, 5),
+ INIT_REGMAP_IRQ(AXP288, POKP, 4, 6),
+ INIT_REGMAP_IRQ(AXP288, TIMER, 4, 7),
+
+ INIT_REGMAP_IRQ(AXP288, MV_CHNG, 5, 0),
+ INIT_REGMAP_IRQ(AXP288, BC_USB_CHNG, 5, 1),
};
static const struct of_device_id axp20x_of_match[] = {
};
MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id);
+static const struct acpi_device_id axp20x_acpi_match[] = {
+ {
+ .id = "INT33F4",
+ .driver_data = AXP288_ID,
+ },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, axp20x_acpi_match);
+
static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
.name = "axp20x_irq_chip",
.status_base = AXP20X_IRQ1_STATE,
.ack_base = AXP20X_IRQ1_STATE,
.mask_base = AXP20X_IRQ1_EN,
- .num_regs = 5,
+ .mask_invert = true,
+ .init_ack_masked = true,
.irqs = axp20x_regmap_irqs,
.num_irqs = ARRAY_SIZE(axp20x_regmap_irqs),
+ .num_regs = 5,
+
+};
+
+static const struct regmap_irq_chip axp288_regmap_irq_chip = {
+ .name = "axp288_irq_chip",
+ .status_base = AXP20X_IRQ1_STATE,
+ .ack_base = AXP20X_IRQ1_STATE,
+ .mask_base = AXP20X_IRQ1_EN,
.mask_invert = true,
.init_ack_masked = true,
+ .irqs = axp288_regmap_irqs,
+ .num_irqs = ARRAY_SIZE(axp288_regmap_irqs),
+ .num_regs = 6,
+
};
static struct mfd_cell axp20x_cells[] = {
},
};
+static struct resource axp288_adc_resources[] = {
+ {
+ .name = "GPADC",
+ .start = AXP288_IRQ_GPADC,
+ .end = AXP288_IRQ_GPADC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct resource axp288_charger_resources[] = {
+ {
+ .start = AXP288_IRQ_OV,
+ .end = AXP288_IRQ_OV,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_DONE,
+ .end = AXP288_IRQ_DONE,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_CHARGING,
+ .end = AXP288_IRQ_CHARGING,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_SAFE_QUIT,
+ .end = AXP288_IRQ_SAFE_QUIT,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_SAFE_ENTER,
+ .end = AXP288_IRQ_SAFE_ENTER,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_QCBTU,
+ .end = AXP288_IRQ_QCBTU,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_CBTU,
+ .end = AXP288_IRQ_CBTU,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_QCBTO,
+ .end = AXP288_IRQ_QCBTO,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = AXP288_IRQ_CBTO,
+ .end = AXP288_IRQ_CBTO,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct mfd_cell axp288_cells[] = {
+ {
+ .name = "axp288_adc",
+ .num_resources = ARRAY_SIZE(axp288_adc_resources),
+ .resources = axp288_adc_resources,
+ },
+ {
+ .name = "axp288_charger",
+ .num_resources = ARRAY_SIZE(axp288_charger_resources),
+ .resources = axp288_charger_resources,
+ },
+ {
+ .name = "axp288_battery",
+ .num_resources = ARRAY_SIZE(axp288_battery_resources),
+ .resources = axp288_battery_resources,
+ },
+};
+
static struct axp20x_dev *axp20x_pm_power_off;
static void axp20x_power_off(void)
{
+ if (axp20x_pm_power_off->variant == AXP288_ID)
+ return;
+
regmap_write(axp20x_pm_power_off->regmap, AXP20X_OFF_CTRL,
AXP20X_OFF);
}
+static int axp20x_match_device(struct axp20x_dev *axp20x, struct device *dev)
+{
+ const struct acpi_device_id *acpi_id;
+ const struct of_device_id *of_id;
+
+ if (dev->of_node) {
+ of_id = of_match_device(axp20x_of_match, dev);
+ if (!of_id) {
+ dev_err(dev, "Unable to match OF ID\n");
+ return -ENODEV;
+ }
+ axp20x->variant = (long) of_id->data;
+ } else {
+ acpi_id = acpi_match_device(dev->driver->acpi_match_table, dev);
+ if (!acpi_id || !acpi_id->driver_data) {
+ dev_err(dev, "Unable to match ACPI ID and data\n");
+ return -ENODEV;
+ }
+ axp20x->variant = (long) acpi_id->driver_data;
+ }
+
+ switch (axp20x->variant) {
+ case AXP202_ID:
+ case AXP209_ID:
+ axp20x->nr_cells = ARRAY_SIZE(axp20x_cells);
+ axp20x->cells = axp20x_cells;
+ axp20x->regmap_cfg = &axp20x_regmap_config;
+ axp20x->regmap_irq_chip = &axp20x_regmap_irq_chip;
+ break;
+ case AXP288_ID:
+ axp20x->cells = axp288_cells;
+ axp20x->nr_cells = ARRAY_SIZE(axp288_cells);
+ axp20x->regmap_cfg = &axp288_regmap_config;
+ axp20x->regmap_irq_chip = &axp288_regmap_irq_chip;
+ break;
+ default:
+ dev_err(dev, "unsupported AXP20X ID %lu\n", axp20x->variant);
+ return -EINVAL;
+ }
+ dev_info(dev, "AXP20x variant %s found\n",
+ axp20x_model_names[axp20x->variant]);
+
+ return 0;
+}
+
static int axp20x_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
struct axp20x_dev *axp20x;
- const struct of_device_id *of_id;
int ret;
axp20x = devm_kzalloc(&i2c->dev, sizeof(*axp20x), GFP_KERNEL);
if (!axp20x)
return -ENOMEM;
- of_id = of_match_device(axp20x_of_match, &i2c->dev);
- if (!of_id) {
- dev_err(&i2c->dev, "Unable to setup AXP20X data\n");
- return -ENODEV;
- }
- axp20x->variant = (long) of_id->data;
+ ret = axp20x_match_device(axp20x, &i2c->dev);
+ if (ret)
+ return ret;
axp20x->i2c_client = i2c;
axp20x->dev = &i2c->dev;
dev_set_drvdata(axp20x->dev, axp20x);
- axp20x->regmap = devm_regmap_init_i2c(i2c, &axp20x_regmap_config);
+ axp20x->regmap = devm_regmap_init_i2c(i2c, axp20x->regmap_cfg);
if (IS_ERR(axp20x->regmap)) {
ret = PTR_ERR(axp20x->regmap);
dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
ret = regmap_add_irq_chip(axp20x->regmap, i2c->irq,
IRQF_ONESHOT | IRQF_SHARED, -1,
- &axp20x_regmap_irq_chip,
+ axp20x->regmap_irq_chip,
&axp20x->regmap_irqc);
if (ret) {
dev_err(&i2c->dev, "failed to add irq chip: %d\n", ret);
return ret;
}
- ret = mfd_add_devices(axp20x->dev, -1, axp20x_cells,
- ARRAY_SIZE(axp20x_cells), NULL, 0, NULL);
+ ret = mfd_add_devices(axp20x->dev, -1, axp20x->cells,
+ axp20x->nr_cells, NULL, 0, NULL);
if (ret) {
dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret);
.name = "axp20x",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(axp20x_of_match),
+ .acpi_match_table = ACPI_PTR(axp20x_acpi_match),
},
.probe = axp20x_i2c_probe,
.remove = axp20x_i2c_remove,
da9063->irq_base = pdata->irq_base;
} else {
da9063->flags = 0;
- da9063->irq_base = 0;
+ da9063->irq_base = -1;
}
da9063->chip_irq = irq;
return ret;
}
+ da9063->irq_base = regmap_irq_chip_get_base(da9063->regmap_irq);
+
ret = mfd_add_devices(da9063->dev, -1, da9063_devs,
ARRAY_SIZE(da9063_devs), NULL, da9063->irq_base,
NULL);
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu");
if (!res) {
dev_err(&pdev->dev, "no prcmu memory region provided\n");
- return -ENOENT;
+ return -EINVAL;
}
prcmu_base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
if (!prcmu_base) {
dev_err(&pdev->dev,
"failed to ioremap prcmu register memory\n");
- return -ENOENT;
+ return -ENOMEM;
}
init_prcm_registers();
dbx500_fw_version_init(pdev, pdata->version_offset);
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "prcmu-tcdm");
if (!res) {
dev_err(&pdev->dev, "no prcmu tcdm region provided\n");
- return -ENOENT;
+ return -EINVAL;
}
tcdm_base = devm_ioremap(&pdev->dev, res->start,
resource_size(res));
+ if (!tcdm_base) {
+ dev_err(&pdev->dev,
+ "failed to ioremap prcmu-tcdm register memory\n");
+ return -ENOMEM;
+ }
/* Clean up the mailbox interrupts after pre-kernel code. */
writel(ALL_MBOX_BITS, PRCM_ARM_IT1_CLR);
irq = platform_get_irq(pdev, 0);
if (irq <= 0) {
dev_err(&pdev->dev, "no prcmu irq provided\n");
- return -ENOENT;
+ return irq;
}
err = request_threaded_irq(irq, prcmu_irq_handler,
prcmu_irq_thread_fn, IRQF_NO_SUSPEND, "prcmu", NULL);
if (err < 0) {
pr_err("prcmu: Failed to allocate IRQ_DB8500_PRCMU1.\n");
- err = -EBUSY;
- goto no_irq_return;
+ return err;
}
db8500_irq_init(np);
if (err) {
mfd_remove_devices(&pdev->dev);
pr_err("prcmu: Failed to add subdevices\n");
- goto no_irq_return;
+ return err;
}
}
if (err) {
mfd_remove_devices(&pdev->dev);
pr_err("prcmu: Failed to add ab8500 subdevice\n");
- goto no_irq_return;
+ return err;
}
pr_info("DB8500 PRCMU initialized\n");
-
-no_irq_return:
return err;
}
static const struct of_device_id db8500_prcmu_match[] = {
--- /dev/null
+/*
+ * Driver for the Diolan DLN-2 USB adapter
+ *
+ * Copyright (c) 2014 Intel Corporation
+ *
+ * Derived from:
+ * i2c-diolan-u2c.c
+ * Copyright (c) 2010-2011 Ericsson AB
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation, version 2.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/slab.h>
+#include <linux/usb.h>
+#include <linux/i2c.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/dln2.h>
+#include <linux/rculist.h>
+
+struct dln2_header {
+ __le16 size;
+ __le16 id;
+ __le16 echo;
+ __le16 handle;
+};
+
+struct dln2_response {
+ struct dln2_header hdr;
+ __le16 result;
+};
+
+#define DLN2_GENERIC_MODULE_ID 0x00
+#define DLN2_GENERIC_CMD(cmd) DLN2_CMD(cmd, DLN2_GENERIC_MODULE_ID)
+#define CMD_GET_DEVICE_VER DLN2_GENERIC_CMD(0x30)
+#define CMD_GET_DEVICE_SN DLN2_GENERIC_CMD(0x31)
+
+#define DLN2_HW_ID 0x200
+#define DLN2_USB_TIMEOUT 200 /* in ms */
+#define DLN2_MAX_RX_SLOTS 16
+#define DLN2_MAX_URBS 16
+#define DLN2_RX_BUF_SIZE 512
+
+enum dln2_handle {
+ DLN2_HANDLE_EVENT = 0, /* don't change, hardware defined */
+ DLN2_HANDLE_CTRL,
+ DLN2_HANDLE_GPIO,
+ DLN2_HANDLE_I2C,
+ DLN2_HANDLE_SPI,
+ DLN2_HANDLES
+};
+
+/*
+ * Receive context used between the receive demultiplexer and the transfer
+ * routine. While sending a request the transfer routine will look for a free
+ * receive context and use it to wait for a response and to receive the URB and
+ * thus the response data.
+ */
+struct dln2_rx_context {
+ /* completion used to wait for a response */
+ struct completion done;
+
+ /* if non-NULL the URB contains the response */
+ struct urb *urb;
+
+ /* if true then this context is used to wait for a response */
+ bool in_use;
+};
+
+/*
+ * Receive contexts for a particular DLN2 module (i2c, gpio, etc.). We use the
+ * handle header field to identify the module in dln2_dev.mod_rx_slots and then
+ * the echo header field to index the slots field and find the receive context
+ * for a particular request.
+ */
+struct dln2_mod_rx_slots {
+ /* RX slots bitmap */
+ DECLARE_BITMAP(bmap, DLN2_MAX_RX_SLOTS);
+
+ /* used to wait for a free RX slot */
+ wait_queue_head_t wq;
+
+ /* used to wait for an RX operation to complete */
+ struct dln2_rx_context slots[DLN2_MAX_RX_SLOTS];
+
+ /* avoid races between alloc/free_rx_slot and dln2_rx_transfer */
+ spinlock_t lock;
+};
+
+struct dln2_dev {
+ struct usb_device *usb_dev;
+ struct usb_interface *interface;
+ u8 ep_in;
+ u8 ep_out;
+
+ struct urb *rx_urb[DLN2_MAX_URBS];
+ void *rx_buf[DLN2_MAX_URBS];
+
+ struct dln2_mod_rx_slots mod_rx_slots[DLN2_HANDLES];
+
+ struct list_head event_cb_list;
+ spinlock_t event_cb_lock;
+
+ bool disconnect;
+ int active_transfers;
+ wait_queue_head_t disconnect_wq;
+ spinlock_t disconnect_lock;
+};
+
+struct dln2_event_cb_entry {
+ struct list_head list;
+ u16 id;
+ struct platform_device *pdev;
+ dln2_event_cb_t callback;
+};
+
+int dln2_register_event_cb(struct platform_device *pdev, u16 id,
+ dln2_event_cb_t event_cb)
+{
+ struct dln2_dev *dln2 = dev_get_drvdata(pdev->dev.parent);
+ struct dln2_event_cb_entry *i, *entry;
+ unsigned long flags;
+ int ret = 0;
+
+ entry = kzalloc(sizeof(*entry), GFP_KERNEL);
+ if (!entry)
+ return -ENOMEM;
+
+ entry->id = id;
+ entry->callback = event_cb;
+ entry->pdev = pdev;
+
+ spin_lock_irqsave(&dln2->event_cb_lock, flags);
+
+ list_for_each_entry(i, &dln2->event_cb_list, list) {
+ if (i->id == id) {
+ ret = -EBUSY;
+ break;
+ }
+ }
+
+ if (!ret)
+ list_add_rcu(&entry->list, &dln2->event_cb_list);
+
+ spin_unlock_irqrestore(&dln2->event_cb_lock, flags);
+
+ if (ret)
+ kfree(entry);
+
+ return ret;
+}
+EXPORT_SYMBOL(dln2_register_event_cb);
+
+void dln2_unregister_event_cb(struct platform_device *pdev, u16 id)
+{
+ struct dln2_dev *dln2 = dev_get_drvdata(pdev->dev.parent);
+ struct dln2_event_cb_entry *i;
+ unsigned long flags;
+ bool found = false;
+
+ spin_lock_irqsave(&dln2->event_cb_lock, flags);
+
+ list_for_each_entry(i, &dln2->event_cb_list, list) {
+ if (i->id == id) {
+ list_del_rcu(&i->list);
+ found = true;
+ break;
+ }
+ }
+
+ spin_unlock_irqrestore(&dln2->event_cb_lock, flags);
+
+ if (found) {
+ synchronize_rcu();
+ kfree(i);
+ }
+}
+EXPORT_SYMBOL(dln2_unregister_event_cb);
+
+/*
+ * Returns true if a valid transfer slot is found. In this case the URB must not
+ * be resubmitted immediately in dln2_rx as we need the data when dln2_transfer
+ * is woke up. It will be resubmitted there.
+ */
+static bool dln2_transfer_complete(struct dln2_dev *dln2, struct urb *urb,
+ u16 handle, u16 rx_slot)
+{
+ struct device *dev = &dln2->interface->dev;
+ struct dln2_mod_rx_slots *rxs = &dln2->mod_rx_slots[handle];
+ struct dln2_rx_context *rxc;
+ bool valid_slot = false;
+
+ if (rx_slot >= DLN2_MAX_RX_SLOTS)
+ goto out;
+
+ rxc = &rxs->slots[rx_slot];
+
+ /*
+ * No need to disable interrupts as this lock is not taken in interrupt
+ * context elsewhere in this driver. This function (or its callers) are
+ * also not exported to other modules.
+ */
+ spin_lock(&rxs->lock);
+ if (rxc->in_use && !rxc->urb) {
+ rxc->urb = urb;
+ complete(&rxc->done);
+ valid_slot = true;
+ }
+ spin_unlock(&rxs->lock);
+
+out:
+ if (!valid_slot)
+ dev_warn(dev, "bad/late response %d/%d\n", handle, rx_slot);
+
+ return valid_slot;
+}
+
+static void dln2_run_event_callbacks(struct dln2_dev *dln2, u16 id, u16 echo,
+ void *data, int len)
+{
+ struct dln2_event_cb_entry *i;
+
+ rcu_read_lock();
+
+ list_for_each_entry_rcu(i, &dln2->event_cb_list, list) {
+ if (i->id == id) {
+ i->callback(i->pdev, echo, data, len);
+ break;
+ }
+ }
+
+ rcu_read_unlock();
+}
+
+static void dln2_rx(struct urb *urb)
+{
+ struct dln2_dev *dln2 = urb->context;
+ struct dln2_header *hdr = urb->transfer_buffer;
+ struct device *dev = &dln2->interface->dev;
+ u16 id, echo, handle, size;
+ u8 *data;
+ int len;
+ int err;
+
+ switch (urb->status) {
+ case 0:
+ /* success */
+ break;
+ case -ECONNRESET:
+ case -ENOENT:
+ case -ESHUTDOWN:
+ case -EPIPE:
+ /* this urb is terminated, clean up */
+ dev_dbg(dev, "urb shutting down with status %d\n", urb->status);
+ return;
+ default:
+ dev_dbg(dev, "nonzero urb status received %d\n", urb->status);
+ goto out;
+ }
+
+ if (urb->actual_length < sizeof(struct dln2_header)) {
+ dev_err(dev, "short response: %d\n", urb->actual_length);
+ goto out;
+ }
+
+ handle = le16_to_cpu(hdr->handle);
+ id = le16_to_cpu(hdr->id);
+ echo = le16_to_cpu(hdr->echo);
+ size = le16_to_cpu(hdr->size);
+
+ if (size != urb->actual_length) {
+ dev_err(dev, "size mismatch: handle %x cmd %x echo %x size %d actual %d\n",
+ handle, id, echo, size, urb->actual_length);
+ goto out;
+ }
+
+ if (handle >= DLN2_HANDLES) {
+ dev_warn(dev, "invalid handle %d\n", handle);
+ goto out;
+ }
+
+ data = urb->transfer_buffer + sizeof(struct dln2_header);
+ len = urb->actual_length - sizeof(struct dln2_header);
+
+ if (handle == DLN2_HANDLE_EVENT) {
+ dln2_run_event_callbacks(dln2, id, echo, data, len);
+ } else {
+ /* URB will be re-submitted in _dln2_transfer (free_rx_slot) */
+ if (dln2_transfer_complete(dln2, urb, handle, echo))
+ return;
+ }
+
+out:
+ err = usb_submit_urb(urb, GFP_ATOMIC);
+ if (err < 0)
+ dev_err(dev, "failed to resubmit RX URB: %d\n", err);
+}
+
+static void *dln2_prep_buf(u16 handle, u16 cmd, u16 echo, const void *obuf,
+ int *obuf_len, gfp_t gfp)
+{
+ int len;
+ void *buf;
+ struct dln2_header *hdr;
+
+ len = *obuf_len + sizeof(*hdr);
+ buf = kmalloc(len, gfp);
+ if (!buf)
+ return NULL;
+
+ hdr = (struct dln2_header *)buf;
+ hdr->id = cpu_to_le16(cmd);
+ hdr->size = cpu_to_le16(len);
+ hdr->echo = cpu_to_le16(echo);
+ hdr->handle = cpu_to_le16(handle);
+
+ memcpy(buf + sizeof(*hdr), obuf, *obuf_len);
+
+ *obuf_len = len;
+
+ return buf;
+}
+
+static int dln2_send_wait(struct dln2_dev *dln2, u16 handle, u16 cmd, u16 echo,
+ const void *obuf, int obuf_len)
+{
+ int ret = 0;
+ int len = obuf_len;
+ void *buf;
+ int actual;
+
+ buf = dln2_prep_buf(handle, cmd, echo, obuf, &len, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ ret = usb_bulk_msg(dln2->usb_dev,
+ usb_sndbulkpipe(dln2->usb_dev, dln2->ep_out),
+ buf, len, &actual, DLN2_USB_TIMEOUT);
+
+ kfree(buf);
+
+ return ret;
+}
+
+static bool find_free_slot(struct dln2_dev *dln2, u16 handle, int *slot)
+{
+ struct dln2_mod_rx_slots *rxs;
+ unsigned long flags;
+
+ if (dln2->disconnect) {
+ *slot = -ENODEV;
+ return true;
+ }
+
+ rxs = &dln2->mod_rx_slots[handle];
+
+ spin_lock_irqsave(&rxs->lock, flags);
+
+ *slot = find_first_zero_bit(rxs->bmap, DLN2_MAX_RX_SLOTS);
+
+ if (*slot < DLN2_MAX_RX_SLOTS) {
+ struct dln2_rx_context *rxc = &rxs->slots[*slot];
+
+ set_bit(*slot, rxs->bmap);
+ rxc->in_use = true;
+ }
+
+ spin_unlock_irqrestore(&rxs->lock, flags);
+
+ return *slot < DLN2_MAX_RX_SLOTS;
+}
+
+static int alloc_rx_slot(struct dln2_dev *dln2, u16 handle)
+{
+ int ret;
+ int slot;
+
+ /*
+ * No need to timeout here, the wait is bounded by the timeout in
+ * _dln2_transfer.
+ */
+ ret = wait_event_interruptible(dln2->mod_rx_slots[handle].wq,
+ find_free_slot(dln2, handle, &slot));
+ if (ret < 0)
+ return ret;
+
+ return slot;
+}
+
+static void free_rx_slot(struct dln2_dev *dln2, u16 handle, int slot)
+{
+ struct dln2_mod_rx_slots *rxs;
+ struct urb *urb = NULL;
+ unsigned long flags;
+ struct dln2_rx_context *rxc;
+
+ rxs = &dln2->mod_rx_slots[handle];
+
+ spin_lock_irqsave(&rxs->lock, flags);
+
+ clear_bit(slot, rxs->bmap);
+
+ rxc = &rxs->slots[slot];
+ rxc->in_use = false;
+ urb = rxc->urb;
+ rxc->urb = NULL;
+ reinit_completion(&rxc->done);
+
+ spin_unlock_irqrestore(&rxs->lock, flags);
+
+ if (urb) {
+ int err;
+ struct device *dev = &dln2->interface->dev;
+
+ err = usb_submit_urb(urb, GFP_KERNEL);
+ if (err < 0)
+ dev_err(dev, "failed to resubmit RX URB: %d\n", err);
+ }
+
+ wake_up_interruptible(&rxs->wq);
+}
+
+static int _dln2_transfer(struct dln2_dev *dln2, u16 handle, u16 cmd,
+ const void *obuf, unsigned obuf_len,
+ void *ibuf, unsigned *ibuf_len)
+{
+ int ret = 0;
+ int rx_slot;
+ struct dln2_response *rsp;
+ struct dln2_rx_context *rxc;
+ struct device *dev = &dln2->interface->dev;
+ const unsigned long timeout = DLN2_USB_TIMEOUT * HZ / 1000;
+ struct dln2_mod_rx_slots *rxs = &dln2->mod_rx_slots[handle];
+ int size;
+
+ spin_lock(&dln2->disconnect_lock);
+ if (!dln2->disconnect)
+ dln2->active_transfers++;
+ else
+ ret = -ENODEV;
+ spin_unlock(&dln2->disconnect_lock);
+
+ if (ret)
+ return ret;
+
+ rx_slot = alloc_rx_slot(dln2, handle);
+ if (rx_slot < 0) {
+ ret = rx_slot;
+ goto out_decr;
+ }
+
+ ret = dln2_send_wait(dln2, handle, cmd, rx_slot, obuf, obuf_len);
+ if (ret < 0) {
+ dev_err(dev, "USB write failed: %d\n", ret);
+ goto out_free_rx_slot;
+ }
+
+ rxc = &rxs->slots[rx_slot];
+
+ ret = wait_for_completion_interruptible_timeout(&rxc->done, timeout);
+ if (ret <= 0) {
+ if (!ret)
+ ret = -ETIMEDOUT;
+ goto out_free_rx_slot;
+ } else {
+ ret = 0;
+ }
+
+ if (dln2->disconnect) {
+ ret = -ENODEV;
+ goto out_free_rx_slot;
+ }
+
+ /* if we got here we know that the response header has been checked */
+ rsp = rxc->urb->transfer_buffer;
+ size = le16_to_cpu(rsp->hdr.size);
+
+ if (size < sizeof(*rsp)) {
+ ret = -EPROTO;
+ goto out_free_rx_slot;
+ }
+
+ if (le16_to_cpu(rsp->result) > 0x80) {
+ dev_dbg(dev, "%d received response with error %d\n",
+ handle, le16_to_cpu(rsp->result));
+ ret = -EREMOTEIO;
+ goto out_free_rx_slot;
+ }
+
+ if (!ibuf)
+ goto out_free_rx_slot;
+
+ if (*ibuf_len > size - sizeof(*rsp))
+ *ibuf_len = size - sizeof(*rsp);
+
+ memcpy(ibuf, rsp + 1, *ibuf_len);
+
+out_free_rx_slot:
+ free_rx_slot(dln2, handle, rx_slot);
+out_decr:
+ spin_lock(&dln2->disconnect_lock);
+ dln2->active_transfers--;
+ spin_unlock(&dln2->disconnect_lock);
+ if (dln2->disconnect)
+ wake_up(&dln2->disconnect_wq);
+
+ return ret;
+}
+
+int dln2_transfer(struct platform_device *pdev, u16 cmd,
+ const void *obuf, unsigned obuf_len,
+ void *ibuf, unsigned *ibuf_len)
+{
+ struct dln2_platform_data *dln2_pdata;
+ struct dln2_dev *dln2;
+ u16 handle;
+
+ dln2 = dev_get_drvdata(pdev->dev.parent);
+ dln2_pdata = dev_get_platdata(&pdev->dev);
+ handle = dln2_pdata->handle;
+
+ return _dln2_transfer(dln2, handle, cmd, obuf, obuf_len, ibuf,
+ ibuf_len);
+}
+EXPORT_SYMBOL(dln2_transfer);
+
+static int dln2_check_hw(struct dln2_dev *dln2)
+{
+ int ret;
+ __le32 hw_type;
+ int len = sizeof(hw_type);
+
+ ret = _dln2_transfer(dln2, DLN2_HANDLE_CTRL, CMD_GET_DEVICE_VER,
+ NULL, 0, &hw_type, &len);
+ if (ret < 0)
+ return ret;
+ if (len < sizeof(hw_type))
+ return -EREMOTEIO;
+
+ if (le32_to_cpu(hw_type) != DLN2_HW_ID) {
+ dev_err(&dln2->interface->dev, "Device ID 0x%x not supported\n",
+ le32_to_cpu(hw_type));
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+static int dln2_print_serialno(struct dln2_dev *dln2)
+{
+ int ret;
+ __le32 serial_no;
+ int len = sizeof(serial_no);
+ struct device *dev = &dln2->interface->dev;
+
+ ret = _dln2_transfer(dln2, DLN2_HANDLE_CTRL, CMD_GET_DEVICE_SN, NULL, 0,
+ &serial_no, &len);
+ if (ret < 0)
+ return ret;
+ if (len < sizeof(serial_no))
+ return -EREMOTEIO;
+
+ dev_info(dev, "Diolan DLN2 serial %u\n", le32_to_cpu(serial_no));
+
+ return 0;
+}
+
+static int dln2_hw_init(struct dln2_dev *dln2)
+{
+ int ret;
+
+ ret = dln2_check_hw(dln2);
+ if (ret < 0)
+ return ret;
+
+ return dln2_print_serialno(dln2);
+}
+
+static void dln2_free_rx_urbs(struct dln2_dev *dln2)
+{
+ int i;
+
+ for (i = 0; i < DLN2_MAX_URBS; i++) {
+ usb_kill_urb(dln2->rx_urb[i]);
+ usb_free_urb(dln2->rx_urb[i]);
+ kfree(dln2->rx_buf[i]);
+ }
+}
+
+static void dln2_free(struct dln2_dev *dln2)
+{
+ dln2_free_rx_urbs(dln2);
+ usb_put_dev(dln2->usb_dev);
+ kfree(dln2);
+}
+
+static int dln2_setup_rx_urbs(struct dln2_dev *dln2,
+ struct usb_host_interface *hostif)
+{
+ int i;
+ int ret;
+ const int rx_max_size = DLN2_RX_BUF_SIZE;
+ struct device *dev = &dln2->interface->dev;
+
+ for (i = 0; i < DLN2_MAX_URBS; i++) {
+ dln2->rx_buf[i] = kmalloc(rx_max_size, GFP_KERNEL);
+ if (!dln2->rx_buf[i])
+ return -ENOMEM;
+
+ dln2->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
+ if (!dln2->rx_urb[i])
+ return -ENOMEM;
+
+ usb_fill_bulk_urb(dln2->rx_urb[i], dln2->usb_dev,
+ usb_rcvbulkpipe(dln2->usb_dev, dln2->ep_in),
+ dln2->rx_buf[i], rx_max_size, dln2_rx, dln2);
+
+ ret = usb_submit_urb(dln2->rx_urb[i], GFP_KERNEL);
+ if (ret < 0) {
+ dev_err(dev, "failed to submit RX URB: %d\n", ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static struct dln2_platform_data dln2_pdata_gpio = {
+ .handle = DLN2_HANDLE_GPIO,
+};
+
+/* Only one I2C port seems to be supported on current hardware */
+static struct dln2_platform_data dln2_pdata_i2c = {
+ .handle = DLN2_HANDLE_I2C,
+ .port = 0,
+};
+
+/* Only one SPI port supported */
+static struct dln2_platform_data dln2_pdata_spi = {
+ .handle = DLN2_HANDLE_SPI,
+ .port = 0,
+};
+
+static const struct mfd_cell dln2_devs[] = {
+ {
+ .name = "dln2-gpio",
+ .platform_data = &dln2_pdata_gpio,
+ .pdata_size = sizeof(struct dln2_platform_data),
+ },
+ {
+ .name = "dln2-i2c",
+ .platform_data = &dln2_pdata_i2c,
+ .pdata_size = sizeof(struct dln2_platform_data),
+ },
+ {
+ .name = "dln2-spi",
+ .platform_data = &dln2_pdata_spi,
+ .pdata_size = sizeof(struct dln2_platform_data),
+ },
+};
+
+static void dln2_disconnect(struct usb_interface *interface)
+{
+ struct dln2_dev *dln2 = usb_get_intfdata(interface);
+ int i, j;
+
+ /* don't allow starting new transfers */
+ spin_lock(&dln2->disconnect_lock);
+ dln2->disconnect = true;
+ spin_unlock(&dln2->disconnect_lock);
+
+ /* cancel in progress transfers */
+ for (i = 0; i < DLN2_HANDLES; i++) {
+ struct dln2_mod_rx_slots *rxs = &dln2->mod_rx_slots[i];
+ unsigned long flags;
+
+ spin_lock_irqsave(&rxs->lock, flags);
+
+ /* cancel all response waiters */
+ for (j = 0; j < DLN2_MAX_RX_SLOTS; j++) {
+ struct dln2_rx_context *rxc = &rxs->slots[j];
+
+ if (rxc->in_use)
+ complete(&rxc->done);
+ }
+
+ spin_unlock_irqrestore(&rxs->lock, flags);
+ }
+
+ /* wait for transfers to end */
+ wait_event(dln2->disconnect_wq, !dln2->active_transfers);
+
+ mfd_remove_devices(&interface->dev);
+
+ dln2_free(dln2);
+}
+
+static int dln2_probe(struct usb_interface *interface,
+ const struct usb_device_id *usb_id)
+{
+ struct usb_host_interface *hostif = interface->cur_altsetting;
+ struct device *dev = &interface->dev;
+ struct dln2_dev *dln2;
+ int ret;
+ int i, j;
+
+ if (hostif->desc.bInterfaceNumber != 0 ||
+ hostif->desc.bNumEndpoints < 2)
+ return -ENODEV;
+
+ dln2 = kzalloc(sizeof(*dln2), GFP_KERNEL);
+ if (!dln2)
+ return -ENOMEM;
+
+ dln2->ep_out = hostif->endpoint[0].desc.bEndpointAddress;
+ dln2->ep_in = hostif->endpoint[1].desc.bEndpointAddress;
+ dln2->usb_dev = usb_get_dev(interface_to_usbdev(interface));
+ dln2->interface = interface;
+ usb_set_intfdata(interface, dln2);
+ init_waitqueue_head(&dln2->disconnect_wq);
+
+ for (i = 0; i < DLN2_HANDLES; i++) {
+ init_waitqueue_head(&dln2->mod_rx_slots[i].wq);
+ spin_lock_init(&dln2->mod_rx_slots[i].lock);
+ for (j = 0; j < DLN2_MAX_RX_SLOTS; j++)
+ init_completion(&dln2->mod_rx_slots[i].slots[j].done);
+ }
+
+ spin_lock_init(&dln2->event_cb_lock);
+ spin_lock_init(&dln2->disconnect_lock);
+ INIT_LIST_HEAD(&dln2->event_cb_list);
+
+ ret = dln2_setup_rx_urbs(dln2, hostif);
+ if (ret)
+ goto out_cleanup;
+
+ ret = dln2_hw_init(dln2);
+ if (ret < 0) {
+ dev_err(dev, "failed to initialize hardware\n");
+ goto out_cleanup;
+ }
+
+ ret = mfd_add_hotplug_devices(dev, dln2_devs, ARRAY_SIZE(dln2_devs));
+ if (ret != 0) {
+ dev_err(dev, "failed to add mfd devices to core\n");
+ goto out_cleanup;
+ }
+
+ return 0;
+
+out_cleanup:
+ dln2_free(dln2);
+
+ return ret;
+}
+
+static const struct usb_device_id dln2_table[] = {
+ { USB_DEVICE(0xa257, 0x2013) },
+ { }
+};
+
+MODULE_DEVICE_TABLE(usb, dln2_table);
+
+static struct usb_driver dln2_driver = {
+ .name = "dln2",
+ .probe = dln2_probe,
+ .disconnect = dln2_disconnect,
+ .id_table = dln2_table,
+};
+
+module_usb_driver(dln2_driver);
+
+MODULE_AUTHOR("Octavian Purdila <octavian.purdila@intel.com>");
+MODULE_DESCRIPTION("Core driver for the Diolan DLN2 interface adapter");
+MODULE_LICENSE("GPL v2");
return -ENODEV;
}
- ret = mfd_add_devices(&dev->dev, 0, lpc_sch_cells, cells, NULL, 0, NULL);
- if (ret)
- mfd_remove_devices(&dev->dev);
-
- return ret;
+ return mfd_add_devices(&dev->dev, 0, lpc_sch_cells, cells, NULL, 0, NULL);
}
static void lpc_sch_remove(struct pci_dev *dev)
/*
* max14577.c - mfd core driver for the Maxim 14577/77836
*
- * Copyright (C) 2014 Samsung Electrnoics
+ * Copyright (C) 2014 Samsung Electronics
* Chanwoo Choi <cw00.choi@samsung.com>
* Krzysztof Kozlowski <k.kozlowski@samsung.com>
*
static const struct mfd_cell max77693_devs[] = {
{ .name = "max77693-pmic", },
- { .name = "max77693-charger", },
+ {
+ .name = "max77693-charger",
+ .of_compatible = "maxim,max77693-charger",
+ },
{ .name = "max77693-muic", },
- { .name = "max77693-haptic", },
+ {
+ .name = "max77693-haptic",
+ .of_compatible = "maxim,max77693-haptic",
+ },
{
.name = "max77693-flash",
.of_compatible = "maxim,max77693-flash",
.num_irqs = ARRAY_SIZE(max77693_muic_irqs),
};
+static const struct regmap_config max77693_regmap_haptic_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .max_register = MAX77693_HAPTIC_REG_END,
+};
+
static int max77693_i2c_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
}
i2c_set_clientdata(max77693->haptic, max77693);
+ max77693->regmap_haptic = devm_regmap_init_i2c(max77693->haptic,
+ &max77693_regmap_haptic_config);
+ if (IS_ERR(max77693->regmap_haptic)) {
+ ret = PTR_ERR(max77693->regmap_haptic);
+ dev_err(max77693->dev,
+ "failed to initialize haptic register map: %d\n", ret);
+ goto err_regmap;
+ }
+
/*
* Initialize register map for MUIC device because use regmap-muic
* instance of MUIC device when irq of max77693 is initialized
ret = PTR_ERR(max77693->regmap_muic);
dev_err(max77693->dev,
"failed to allocate register map: %d\n", ret);
- goto err_regmap_muic;
+ goto err_regmap;
}
ret = regmap_add_irq_chip(max77693->regmap, max77693->irq,
&max77693->irq_data_led);
if (ret) {
dev_err(max77693->dev, "failed to add irq chip: %d\n", ret);
- goto err_regmap_muic;
+ goto err_regmap;
}
ret = regmap_add_irq_chip(max77693->regmap, max77693->irq,
goto err_irq_charger;
}
- ret = regmap_add_irq_chip(max77693->regmap, max77693->irq,
+ ret = regmap_add_irq_chip(max77693->regmap_muic, max77693->irq,
IRQF_ONESHOT | IRQF_SHARED |
IRQF_TRIGGER_FALLING, 0,
&max77693_muic_irq_chip,
goto err_irq_muic;
}
+ /* Unmask interrupts from all blocks in interrupt source register */
+ ret = regmap_update_bits(max77693->regmap,
+ MAX77693_PMIC_REG_INTSRC_MASK,
+ SRC_IRQ_ALL, (unsigned int)~SRC_IRQ_ALL);
+ if (ret < 0) {
+ dev_err(max77693->dev,
+ "Could not unmask interrupts in INTSRC: %d\n",
+ ret);
+ goto err_intsrc;
+ }
+
pm_runtime_set_active(max77693->dev);
ret = mfd_add_devices(max77693->dev, -1, max77693_devs,
err_mfd:
mfd_remove_devices(max77693->dev);
+err_intsrc:
regmap_del_irq_chip(max77693->irq, max77693->irq_data_muic);
err_irq_muic:
regmap_del_irq_chip(max77693->irq, max77693->irq_data_charger);
regmap_del_irq_chip(max77693->irq, max77693->irq_data_topsys);
err_irq_topsys:
regmap_del_irq_chip(max77693->irq, max77693->irq_data_led);
-err_regmap_muic:
+err_regmap:
i2c_unregister_device(max77693->haptic);
err_i2c_haptic:
i2c_unregister_device(max77693->muic);
struct platform_device *pdev;
struct device_node *np = NULL;
int ret = -ENOMEM;
+ int platform_id;
int r;
- pdev = platform_device_alloc(cell->name, id + cell->id);
+ if (id < 0)
+ platform_id = id;
+ else
+ platform_id = id + cell->id;
+
+ pdev = platform_device_alloc(cell->name, platform_id);
if (!pdev)
goto fail_alloc;
static int rts5227_optimize_phy(struct rtsx_pcr *pcr)
{
+ int err;
+
+ err = rtsx_gops_pm_reset(pcr);
+ if (err < 0)
+ return err;
+
/* Optimize RX sensitivity */
return rtsx_pci_write_phy_register(pcr, 0x00, 0xBA42);
}
{
int err;
+ err = rtsx_gops_pm_reset(pcr);
+ if (err < 0)
+ return err;
+
err = rtsx_pci_write_phy_register(pcr, PHY_REG_REV,
PHY_REG_REV_RESV | PHY_REG_REV_RXIDLE_LATCHED |
PHY_REG_REV_P1_EN | PHY_REG_REV_RXIDLE_EN |
--- /dev/null
+/* Driver for Realtek PCI-Express card reader
+ *
+ * Copyright(c) 2009-2013 Realtek Semiconductor Corp. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ *
+ * Author:
+ * Micky Ching <micky_ching@realsil.com.cn>
+ */
+
+#include <linux/mfd/rtsx_pci.h>
+#include "rtsx_pcr.h"
+
+int rtsx_gops_pm_reset(struct rtsx_pcr *pcr)
+{
+ int err;
+
+ /* init aspm */
+ rtsx_pci_write_register(pcr, ASPM_FORCE_CTL, 0xFF, 0x00);
+ err = rtsx_pci_update_cfg_byte(pcr, LCTLR, ~LCTLR_ASPM_CTL_MASK, 0x00);
+ if (err < 0)
+ return err;
+
+ /* reset PM_CTRL3 before send buffer cmd */
+ return rtsx_pci_write_register(pcr, PM_CTRL3, D3_DELINK_MODE_EN, 0x00);
+}
mutex_unlock(&pcr->pcr_mutex);
}
+#ifdef CONFIG_PM
static void rtsx_pci_power_off(struct rtsx_pcr *pcr, u8 pm_state)
{
if (pcr->ops->turn_off_led)
if (pcr->ops->force_power_down)
pcr->ops->force_power_down(pcr, pm_state);
}
+#endif
static int rtsx_pci_init_hw(struct rtsx_pcr *pcr)
{
pcr->ms_pull_ctl_disable_tbl = __device##_ms_pull_ctl_disable_tbl; \
} while (0)
+/* generic operations */
+int rtsx_gops_pm_reset(struct rtsx_pcr *pcr);
+
#endif
/* initialize USB SG transfer timer */
setup_timer(&ucr->sg_timer, rtsx_usb_sg_timed_out, (unsigned long) ucr);
- ret = mfd_add_devices(&intf->dev, usb_dev->devnum, rtsx_usb_cells,
- ARRAY_SIZE(rtsx_usb_cells), NULL, 0, NULL);
+ ret = mfd_add_hotplug_devices(&intf->dev, rtsx_usb_cells,
+ ARRAY_SIZE(rtsx_usb_cells));
if (ret)
goto out_init_fail;
#include <linux/mfd/samsung/irq.h>
#include <linux/mfd/samsung/s2mpa01.h>
#include <linux/mfd/samsung/s2mps11.h>
+#include <linux/mfd/samsung/s2mps13.h>
#include <linux/mfd/samsung/s2mps14.h>
#include <linux/mfd/samsung/s2mpu02.h>
#include <linux/mfd/samsung/s5m8763.h>
#include <linux/mfd/samsung/s5m8767.h>
-#include <linux/regulator/machine.h>
#include <linux/regmap.h>
static const struct mfd_cell s5m8751_devs[] = {
}
};
+static const struct mfd_cell s2mps13_devs[] = {
+ { .name = "s2mps13-pmic", },
+ { .name = "s2mps13-rtc", },
+ {
+ .name = "s2mps13-clk",
+ .of_compatible = "samsung,s2mps13-clk",
+ },
+};
+
static const struct mfd_cell s2mps14_devs[] = {
{
.name = "s2mps14-pmic",
}, {
.compatible = "samsung,s2mps11-pmic",
.data = (void *)S2MPS11X,
+ }, {
+ .compatible = "samsung,s2mps13-pmic",
+ .data = (void *)S2MPS13X,
}, {
.compatible = "samsung,s2mps14-pmic",
.data = (void *)S2MPS14X,
.cache_type = REGCACHE_FLAT,
};
+static const struct regmap_config s2mps13_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+
+ .max_register = S2MPS13_REG_LDODSCH5,
+ .volatile_reg = s2mps11_volatile,
+ .cache_type = REGCACHE_FLAT,
+};
+
static const struct regmap_config s2mps14_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
case S2MPS11X:
regmap = &s2mps11_regmap_config;
break;
+ case S2MPS13X:
+ regmap = &s2mps13_regmap_config;
+ break;
case S2MPS14X:
regmap = &s2mps14_regmap_config;
break;
sec_devs = s2mps11_devs;
num_sec_devs = ARRAY_SIZE(s2mps11_devs);
break;
+ case S2MPS13X:
+ sec_devs = s2mps13_devs;
+ num_sec_devs = ARRAY_SIZE(s2mps13_devs);
+ break;
case S2MPS14X:
sec_devs = s2mps14_devs;
num_sec_devs = ARRAY_SIZE(s2mps14_devs);
*/
disable_irq(sec_pmic->irq);
- switch (sec_pmic->device_type) {
- case S2MPS14X:
- case S2MPU02:
- regulator_suspend_prepare(PM_SUSPEND_MEM);
- break;
- default:
- break;
- }
-
return 0;
}
.ack_base = S2MPS11_REG_INT1,
};
+#define S2MPS1X_IRQ_CHIP_COMMON_DATA \
+ .irqs = s2mps14_irqs, \
+ .num_irqs = ARRAY_SIZE(s2mps14_irqs), \
+ .num_regs = 3, \
+ .status_base = S2MPS14_REG_INT1, \
+ .mask_base = S2MPS14_REG_INT1M, \
+ .ack_base = S2MPS14_REG_INT1 \
+
+static const struct regmap_irq_chip s2mps13_irq_chip = {
+ .name = "s2mps13",
+ S2MPS1X_IRQ_CHIP_COMMON_DATA,
+};
+
static const struct regmap_irq_chip s2mps14_irq_chip = {
.name = "s2mps14",
- .irqs = s2mps14_irqs,
- .num_irqs = ARRAY_SIZE(s2mps14_irqs),
- .num_regs = 3,
- .status_base = S2MPS14_REG_INT1,
- .mask_base = S2MPS14_REG_INT1M,
- .ack_base = S2MPS14_REG_INT1,
+ S2MPS1X_IRQ_CHIP_COMMON_DATA,
};
static const struct regmap_irq_chip s2mpu02_irq_chip = {
case S2MPS11X:
sec_irq_chip = &s2mps11_irq_chip;
break;
+ case S2MPS13X:
+ sec_irq_chip = &s2mps13_irq_chip;
+ break;
case S2MPS14X:
sec_irq_chip = &s2mps14_irq_chip;
break;
#define STMPE24XX_REG_CHIP_ID 0x80
#define STMPE24XX_REG_IEGPIOR_LSB 0x18
#define STMPE24XX_REG_ISGPIOR_MSB 0x19
-#define STMPE24XX_REG_GPMR_LSB 0xA5
+#define STMPE24XX_REG_GPMR_LSB 0xA4
#define STMPE24XX_REG_GPSR_LSB 0x85
#define STMPE24XX_REG_GPCR_LSB 0x88
#define STMPE24XX_REG_GPDR_LSB 0x8B
#include <linux/err.h>
#include <linux/io.h>
#include <linux/module.h>
+#include <linux/list.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
+#include <linux/slab.h>
static struct platform_driver syscon_driver;
+static DEFINE_SPINLOCK(syscon_list_slock);
+static LIST_HEAD(syscon_list);
+
struct syscon {
+ struct device_node *np;
struct regmap *regmap;
+ struct list_head list;
+};
+
+static struct regmap_config syscon_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
};
-static int syscon_match_node(struct device *dev, void *data)
+static struct syscon *of_syscon_register(struct device_node *np)
{
- struct device_node *dn = data;
+ struct syscon *syscon;
+ struct regmap *regmap;
+ void __iomem *base;
+ int ret;
+ struct regmap_config syscon_config = syscon_regmap_config;
+
+ if (!of_device_is_compatible(np, "syscon"))
+ return ERR_PTR(-EINVAL);
+
+ syscon = kzalloc(sizeof(*syscon), GFP_KERNEL);
+ if (!syscon)
+ return ERR_PTR(-ENOMEM);
+
+ base = of_iomap(np, 0);
+ if (!base) {
+ ret = -ENOMEM;
+ goto err_map;
+ }
+
+ /* Parse the device's DT node for an endianness specification */
+ if (of_property_read_bool(np, "big-endian"))
+ syscon_config.val_format_endian = REGMAP_ENDIAN_BIG;
+ else if (of_property_read_bool(np, "little-endian"))
+ syscon_config.val_format_endian = REGMAP_ENDIAN_LITTLE;
+
+ regmap = regmap_init_mmio(NULL, base, &syscon_config);
+ if (IS_ERR(regmap)) {
+ pr_err("regmap init failed\n");
+ ret = PTR_ERR(regmap);
+ goto err_regmap;
+ }
+
+ syscon->regmap = regmap;
+ syscon->np = np;
+
+ spin_lock(&syscon_list_slock);
+ list_add_tail(&syscon->list, &syscon_list);
+ spin_unlock(&syscon_list_slock);
- return (dev->of_node == dn) ? 1 : 0;
+ return syscon;
+
+err_regmap:
+ iounmap(base);
+err_map:
+ kfree(syscon);
+ return ERR_PTR(ret);
}
struct regmap *syscon_node_to_regmap(struct device_node *np)
{
- struct syscon *syscon;
- struct device *dev;
+ struct syscon *entry, *syscon = NULL;
- dev = driver_find_device(&syscon_driver.driver, NULL, np,
- syscon_match_node);
- if (!dev)
- return ERR_PTR(-EPROBE_DEFER);
+ spin_lock(&syscon_list_slock);
- syscon = dev_get_drvdata(dev);
+ list_for_each_entry(entry, &syscon_list, list)
+ if (entry->np == np) {
+ syscon = entry;
+ break;
+ }
+
+ spin_unlock(&syscon_list_slock);
+
+ if (!syscon)
+ syscon = of_syscon_register(np);
+
+ if (IS_ERR(syscon))
+ return ERR_CAST(syscon);
return syscon->regmap;
}
}
EXPORT_SYMBOL_GPL(syscon_regmap_lookup_by_phandle);
-static const struct of_device_id of_syscon_match[] = {
- { .compatible = "syscon", },
- { },
-};
-
-static struct regmap_config syscon_regmap_config = {
- .reg_bits = 32,
- .val_bits = 32,
- .reg_stride = 4,
-};
-
static int syscon_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
.driver = {
.name = "syscon",
.owner = THIS_MODULE,
- .of_match_table = of_syscon_match,
},
.probe = syscon_probe,
.id_table = syscon_ids,
unsigned long flags;
u8 dev_ctl;
- clk_enable(t7l66xb->clk32k);
+ clk_prepare_enable(t7l66xb->clk32k);
spin_lock_irqsave(&t7l66xb->lock, flags);
spin_unlock_irqrestore(&t7l66xb->lock, flags);
- clk_disable(t7l66xb->clk32k);
+ clk_disable_unprepare(t7l66xb->clk32k);
return 0;
}
if (pdata && pdata->suspend)
pdata->suspend(dev);
- clk_disable(t7l66xb->clk48m);
+ clk_disable_unprepare(t7l66xb->clk48m);
return 0;
}
struct t7l66xb *t7l66xb = platform_get_drvdata(dev);
struct t7l66xb_platform_data *pdata = dev_get_platdata(&dev->dev);
- clk_enable(t7l66xb->clk48m);
+ clk_prepare_enable(t7l66xb->clk48m);
if (pdata && pdata->resume)
pdata->resume(dev);
goto err_ioremap;
}
- clk_enable(t7l66xb->clk48m);
+ clk_prepare_enable(t7l66xb->clk48m);
if (pdata && pdata->enable)
pdata->enable(dev);
int ret;
ret = pdata->disable(dev);
- clk_disable(t7l66xb->clk48m);
+ clk_disable_unprepare(t7l66xb->clk48m);
clk_put(t7l66xb->clk48m);
- clk_disable(t7l66xb->clk32k);
+ clk_disable_unprepare(t7l66xb->clk32k);
clk_put(t7l66xb->clk32k);
t7l66xb_detach_irq(dev);
iounmap(t7l66xb->scr);
static int tc3589x_irq_init(struct tc3589x *tc3589x, struct device_node *np)
{
- int base = tc3589x->irq_base;
-
tc3589x->domain = irq_domain_add_simple(
- np, TC3589x_NR_INTERNAL_IRQS, base,
+ np, TC3589x_NR_INTERNAL_IRQS, 0,
&tc3589x_irq_ops, tc3589x);
if (!tc3589x->domain) {
if (blocks & TC3589x_BLOCK_GPIO) {
ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_gpio,
ARRAY_SIZE(tc3589x_dev_gpio), NULL,
- tc3589x->irq_base, tc3589x->domain);
+ 0, tc3589x->domain);
if (ret) {
dev_err(tc3589x->dev, "failed to add gpio child\n");
return ret;
if (blocks & TC3589x_BLOCK_KEYPAD) {
ret = mfd_add_devices(tc3589x->dev, -1, tc3589x_dev_keypad,
ARRAY_SIZE(tc3589x_dev_keypad), NULL,
- tc3589x->irq_base, tc3589x->domain);
+ 0, tc3589x->domain);
if (ret) {
dev_err(tc3589x->dev, "failed to keypad child\n");
return ret;
tc3589x->dev = &i2c->dev;
tc3589x->i2c = i2c;
tc3589x->pdata = pdata;
- tc3589x->irq_base = pdata->irq_base;
switch (version) {
case TC3589X_TC35893:
if (pdata && pdata->suspend)
pdata->suspend(dev);
- clk_disable(tc6387xb->clk32k);
+ clk_disable_unprepare(tc6387xb->clk32k);
return 0;
}
struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
struct tc6387xb_platform_data *pdata = dev_get_platdata(&dev->dev);
- clk_enable(tc6387xb->clk32k);
+ clk_prepare_enable(tc6387xb->clk32k);
if (pdata && pdata->resume)
pdata->resume(dev);
struct platform_device *dev = to_platform_device(mmc->dev.parent);
struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
- clk_enable(tc6387xb->clk32k);
+ clk_prepare_enable(tc6387xb->clk32k);
tmio_core_mmc_enable(tc6387xb->scr + 0x200, 0,
tc6387xb_mmc_resources[0].start & 0xfffe);
struct platform_device *dev = to_platform_device(mmc->dev.parent);
struct tc6387xb *tc6387xb = platform_get_drvdata(dev);
- clk_disable(tc6387xb->clk32k);
+ clk_disable_unprepare(tc6387xb->clk32k);
return 0;
}
mfd_remove_devices(&dev->dev);
iounmap(tc6387xb->scr);
release_resource(&tc6387xb->rscr);
- clk_disable(tc6387xb->clk32k);
+ clk_disable_unprepare(tc6387xb->clk32k);
clk_put(tc6387xb->clk32k);
kfree(tc6387xb);
return 0;
}
+static int tc6393xb_ohci_suspend(struct platform_device *dev)
+{
+ struct tc6393xb_platform_data *tcpd = dev_get_platdata(dev->dev.parent);
+
+ /* We can't properly store/restore OHCI state, so fail here */
+ if (tcpd->resume_restore)
+ return -EBUSY;
+
+ return tc6393xb_ohci_disable(dev);
+}
+
static int tc6393xb_fb_enable(struct platform_device *dev)
{
struct tc6393xb *tc6393xb = dev_get_drvdata(dev->dev.parent);
.num_resources = ARRAY_SIZE(tc6393xb_ohci_resources),
.resources = tc6393xb_ohci_resources,
.enable = tc6393xb_ohci_enable,
- .suspend = tc6393xb_ohci_disable,
+ .suspend = tc6393xb_ohci_suspend,
.resume = tc6393xb_ohci_enable,
.disable = tc6393xb_ohci_disable,
},
goto err_ioremap;
}
- ret = clk_enable(tc6393xb->clk);
+ ret = clk_prepare_enable(tc6393xb->clk);
if (ret)
goto err_clk_enable;
gpiochip_remove(&tc6393xb->gpio);
tcpd->disable(dev);
err_enable:
- clk_disable(tc6393xb->clk);
+ clk_disable_unprepare(tc6393xb->clk);
err_clk_enable:
iounmap(tc6393xb->scr);
err_ioremap:
gpiochip_remove(&tc6393xb->gpio);
ret = tcpd->disable(dev);
- clk_disable(tc6393xb->clk);
+ clk_disable_unprepare(tc6393xb->clk);
iounmap(tc6393xb->scr);
release_resource(&tc6393xb->rscr);
clk_put(tc6393xb->clk);
ioread8(tc6393xb->scr + SCR_GPI_BCR(i));
}
ret = tcpd->suspend(dev);
- clk_disable(tc6393xb->clk);
+ clk_disable_unprepare(tc6393xb->clk);
return ret;
}
int ret;
int i;
- clk_enable(tc6393xb->clk);
+ clk_prepare_enable(tc6393xb->clk);
ret = tcpd->resume(dev);
if (ret)
static const struct regmap_irq tps65090_irqs[] = {
/* INT1 IRQs*/
[TPS65090_IRQ_VAC_STATUS_CHANGE] = {
- .mask = TPS65090_INT1_MASK_VAC_STATUS_CHANGE,
+ .mask = TPS65090_INT1_MASK_VAC_STATUS_CHANGE,
},
[TPS65090_IRQ_VSYS_STATUS_CHANGE] = {
- .mask = TPS65090_INT1_MASK_VSYS_STATUS_CHANGE,
+ .mask = TPS65090_INT1_MASK_VSYS_STATUS_CHANGE,
},
[TPS65090_IRQ_BAT_STATUS_CHANGE] = {
- .mask = TPS65090_INT1_MASK_BAT_STATUS_CHANGE,
+ .mask = TPS65090_INT1_MASK_BAT_STATUS_CHANGE,
},
[TPS65090_IRQ_CHARGING_STATUS_CHANGE] = {
- .mask = TPS65090_INT1_MASK_CHARGING_STATUS_CHANGE,
+ .mask = TPS65090_INT1_MASK_CHARGING_STATUS_CHANGE,
},
[TPS65090_IRQ_CHARGING_COMPLETE] = {
- .mask = TPS65090_INT1_MASK_CHARGING_COMPLETE,
+ .mask = TPS65090_INT1_MASK_CHARGING_COMPLETE,
},
[TPS65090_IRQ_OVERLOAD_DCDC1] = {
- .mask = TPS65090_INT1_MASK_OVERLOAD_DCDC1,
+ .mask = TPS65090_INT1_MASK_OVERLOAD_DCDC1,
},
[TPS65090_IRQ_OVERLOAD_DCDC2] = {
- .mask = TPS65090_INT1_MASK_OVERLOAD_DCDC2,
+ .mask = TPS65090_INT1_MASK_OVERLOAD_DCDC2,
},
/* INT2 IRQs*/
[TPS65090_IRQ_OVERLOAD_DCDC3] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_DCDC3,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_DCDC3,
},
[TPS65090_IRQ_OVERLOAD_FET1] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET1,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET1,
},
[TPS65090_IRQ_OVERLOAD_FET2] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET2,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET2,
},
[TPS65090_IRQ_OVERLOAD_FET3] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET3,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET3,
},
[TPS65090_IRQ_OVERLOAD_FET4] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET4,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET4,
},
[TPS65090_IRQ_OVERLOAD_FET5] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET5,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET5,
},
[TPS65090_IRQ_OVERLOAD_FET6] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET6,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET6,
},
[TPS65090_IRQ_OVERLOAD_FET7] = {
- .reg_offset = 1,
- .mask = TPS65090_INT2_MASK_OVERLOAD_FET7,
+ .reg_offset = 1,
+ .mask = TPS65090_INT2_MASK_OVERLOAD_FET7,
},
};
#endif
static int tps65090_i2c_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+ const struct i2c_device_id *id)
{
struct tps65090_platform_data *pdata = dev_get_platdata(&client->dev);
int irq_base = 0;
if (client->irq) {
ret = regmap_add_irq_chip(tps65090->rmap, client->irq,
- IRQF_ONESHOT | IRQF_TRIGGER_LOW, irq_base,
- &tps65090_irq_chip, &tps65090->irq_data);
- if (ret) {
- dev_err(&client->dev,
- "IRQ init failed with err: %d\n", ret);
+ IRQF_ONESHOT | IRQF_TRIGGER_LOW, irq_base,
+ &tps65090_irq_chip, &tps65090->irq_data);
+ if (ret) {
+ dev_err(&client->dev,
+ "IRQ init failed with err: %d\n", ret);
return ret;
}
} else {
}
ret = mfd_add_devices(tps65090->dev, -1, tps65090s,
- ARRAY_SIZE(tps65090s), NULL,
- 0, regmap_irq_get_domain(tps65090->irq_data));
+ ARRAY_SIZE(tps65090s), NULL,
+ 0, regmap_irq_get_domain(tps65090->irq_data));
if (ret) {
dev_err(&client->dev, "add mfd devices failed with err: %d\n",
ret);
static const struct mfd_cell tps65217s[] = {
{
.name = "tps65217-pmic",
+ .of_compatible = "ti,tps65217-pmic",
},
{
.name = "tps65217-bl",
+ .of_compatible = "ti,tps65217-bl",
},
};
#define PWR_DEVSLP BIT(1)
#define PWR_DEVOFF BIT(0)
+/* Register bits for CFG_P1_TRANSITION (also for P2 and P3) */
+#define STARTON_SWBUG BIT(7) /* Start on watchdog */
+#define STARTON_VBUS BIT(5) /* Start on VBUS */
+#define STARTON_VBAT BIT(4) /* Start on battery insert */
+#define STARTON_RTC BIT(3) /* Start on RTC */
+#define STARTON_USB BIT(2) /* Start on USB host */
+#define STARTON_CHG BIT(1) /* Start on charger */
+#define STARTON_PWON BIT(0) /* Start on PWRON button */
+
#define SEQ_OFFSYNC (1 << 0)
#define PHY_TO_OFF_PM_MASTER(p) (p - 0x36)
return 0;
}
+static int twl4030_starton_mask_and_set(u8 bitmask, u8 bitvalues)
+{
+ u8 regs[3] = { TWL4030_PM_MASTER_CFG_P1_TRANSITION,
+ TWL4030_PM_MASTER_CFG_P2_TRANSITION,
+ TWL4030_PM_MASTER_CFG_P3_TRANSITION, };
+ u8 val;
+ int i, err;
+
+ err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, TWL4030_PM_MASTER_KEY_CFG1,
+ TWL4030_PM_MASTER_PROTECT_KEY);
+ if (err)
+ goto relock;
+ err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
+ TWL4030_PM_MASTER_KEY_CFG2,
+ TWL4030_PM_MASTER_PROTECT_KEY);
+ if (err)
+ goto relock;
+
+ for (i = 0; i < sizeof(regs); i++) {
+ err = twl_i2c_read_u8(TWL_MODULE_PM_MASTER,
+ &val, regs[i]);
+ if (err)
+ break;
+ val = (~bitmask & val) | (bitmask & bitvalues);
+ err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER,
+ val, regs[i]);
+ if (err)
+ break;
+ }
+
+ if (err)
+ pr_err("TWL4030 Register access failed: %i\n", err);
+
+relock:
+ return twl_i2c_write_u8(TWL_MODULE_PM_MASTER, 0,
+ TWL4030_PM_MASTER_PROTECT_KEY);
+}
+
/*
* In master mode, start the power off sequence.
* After a successful execution, TWL shuts down the power to the SoC
{
int err;
+ /* Disable start on charger or VBUS as it can break poweroff */
+ err = twl4030_starton_mask_and_set(STARTON_VBUS | STARTON_CHG, 0);
+ if (err)
+ pr_err("TWL4030 Unable to configure start-up\n");
+
err = twl_i2c_write_u8(TWL_MODULE_PM_MASTER, PWR_DEVOFF,
TWL4030_PM_MASTER_P1_SW_EVENTS);
if (err)
};
static struct of_device_id twl4030_power_of_match[] = {
+ {
+ .compatible = "ti,twl4030-power",
+ },
{
.compatible = "ti,twl4030-power-reset",
.data = &omap3_reset,
version >> 8, version & 0xff,
vb->usb_dev->bus->busnum, vb->usb_dev->devnum);
- ret = mfd_add_devices(&interface->dev, -1, vprbrd_devs,
- ARRAY_SIZE(vprbrd_devs), NULL, 0, NULL);
+ ret = mfd_add_hotplug_devices(&interface->dev, vprbrd_devs,
+ ARRAY_SIZE(vprbrd_devs));
if (ret != 0) {
dev_err(&interface->dev, "Failed to add mfd devices to core.");
goto error;
{ 0x00000218, 0x01A6 }, /* R536 - Mic Bias Ctrl 1 */
{ 0x00000219, 0x01A6 }, /* R537 - Mic Bias Ctrl 2 */
{ 0x0000021A, 0x01A6 }, /* R538 - Mic Bias Ctrl 3 */
- { 0x00000225, 0x0400 }, /* R549 - HP Ctrl 1L */
- { 0x00000226, 0x0400 }, /* R550 - HP Ctrl 1R */
{ 0x00000293, 0x0000 }, /* R659 - Accessory Detect Mode 1 */
{ 0x0000029B, 0x0020 }, /* R667 - Headphone Detect 1 */
{ 0x0000029C, 0x0000 }, /* R668 - Headphone Detect 2 */
case ARIZONA_MIC_BIAS_CTRL_1:
case ARIZONA_MIC_BIAS_CTRL_2:
case ARIZONA_MIC_BIAS_CTRL_3:
+ case ARIZONA_HP_CTRL_1L:
+ case ARIZONA_HP_CTRL_1R:
case ARIZONA_ACCESSORY_DETECT_MODE_1:
case ARIZONA_HEADPHONE_DETECT_1:
case ARIZONA_HEADPHONE_DETECT_2:
case ARIZONA_DSP1_SCRATCH_1:
case ARIZONA_DSP1_SCRATCH_2:
case ARIZONA_DSP1_SCRATCH_3:
+ case ARIZONA_HP_CTRL_1L:
+ case ARIZONA_HP_CTRL_1R:
case ARIZONA_HEADPHONE_DETECT_2:
case ARIZONA_HP_DACVAL:
case ARIZONA_MIC_DETECT_3:
{ 0x00000548, 0x1818 }, /* R1352 - AIF2 Frame Ctrl 2 */
{ 0x00000549, 0x0000 }, /* R1353 - AIF2 Frame Ctrl 3 */
{ 0x0000054A, 0x0001 }, /* R1354 - AIF2 Frame Ctrl 4 */
+ { 0x0000054B, 0x0002 }, /* R1355 - AIF2 Frame Ctrl 5 */
+ { 0x0000054C, 0x0003 }, /* R1356 - AIF2 Frame Ctrl 6 */
+ { 0x0000054D, 0x0004 }, /* R1357 - AIF2 Frame Ctrl 7 */
+ { 0x0000054E, 0x0005 }, /* R1358 - AIF2 Frame Ctrl 8 */
{ 0x00000551, 0x0000 }, /* R1361 - AIF2 Frame Ctrl 11 */
{ 0x00000552, 0x0001 }, /* R1362 - AIF2 Frame Ctrl 12 */
+ { 0x00000553, 0x0002 }, /* R1363 - AIF2 Frame Ctrl 13 */
+ { 0x00000554, 0x0003 }, /* R1364 - AIF2 Frame Ctrl 14 */
+ { 0x00000555, 0x0004 }, /* R1365 - AIF2 Frame Ctrl 15 */
+ { 0x00000556, 0x0005 }, /* R1366 - AIF2 Frame Ctrl 16 */
{ 0x00000559, 0x0000 }, /* R1369 - AIF2 Tx Enables */
{ 0x0000055A, 0x0000 }, /* R1370 - AIF2 Rx Enables */
{ 0x00000580, 0x000C }, /* R1408 - AIF3 BCLK Ctrl */
case ARIZONA_MIC_BIAS_CTRL_1:
case ARIZONA_MIC_BIAS_CTRL_2:
case ARIZONA_MIC_BIAS_CTRL_3:
+ case ARIZONA_HP_CTRL_1L:
+ case ARIZONA_HP_CTRL_1R:
case ARIZONA_ACCESSORY_DETECT_MODE_1:
case ARIZONA_HEADPHONE_DETECT_1:
case ARIZONA_HEADPHONE_DETECT_2:
case ARIZONA_AIF2_FRAME_CTRL_2:
case ARIZONA_AIF2_FRAME_CTRL_3:
case ARIZONA_AIF2_FRAME_CTRL_4:
+ case ARIZONA_AIF2_FRAME_CTRL_5:
+ case ARIZONA_AIF2_FRAME_CTRL_6:
+ case ARIZONA_AIF2_FRAME_CTRL_7:
+ case ARIZONA_AIF2_FRAME_CTRL_8:
case ARIZONA_AIF2_FRAME_CTRL_11:
case ARIZONA_AIF2_FRAME_CTRL_12:
+ case ARIZONA_AIF2_FRAME_CTRL_13:
+ case ARIZONA_AIF2_FRAME_CTRL_14:
+ case ARIZONA_AIF2_FRAME_CTRL_15:
+ case ARIZONA_AIF2_FRAME_CTRL_16:
case ARIZONA_AIF2_TX_ENABLES:
case ARIZONA_AIF2_RX_ENABLES:
case ARIZONA_AIF3_BCLK_CTRL:
case ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS:
case ARIZONA_ASYNC_SAMPLE_RATE_2_STATUS:
case ARIZONA_MIC_DETECT_3:
+ case ARIZONA_HP_CTRL_1L:
+ case ARIZONA_HP_CTRL_1R:
case ARIZONA_HEADPHONE_DETECT_2:
case ARIZONA_INPUT_ENABLES_STATUS:
case ARIZONA_OUTPUT_STATUS_1:
goto err;
}
- mode = id2 & WM8350_CONF_STS_MASK >> 10;
+ mode = (id2 & WM8350_CONF_STS_MASK) >> 10;
cust_id = id2 & WM8350_CUST_ID_MASK;
chip_rev = (id2 & WM8350_CHIP_REV_MASK) >> 12;
dev_info(wm8350->dev,
{ 0x00000C23, 0x0000 }, /* R3107 - Misc Pad Ctrl 4 */
{ 0x00000C24, 0x0000 }, /* R3108 - Misc Pad Ctrl 5 */
{ 0x00000D08, 0xFFFF }, /* R3336 - Interrupt Status 1 Mask */
+ { 0x00000D09, 0xFFFF }, /* R3337 - Interrupt Status 2 Mask */
{ 0x00000D0A, 0xFFFF }, /* R3338 - Interrupt Status 3 Mask */
{ 0x00000D0B, 0xFFFF }, /* R3339 - Interrupt Status 4 Mask */
{ 0x00000D0C, 0xFEFF }, /* R3340 - Interrupt Status 5 Mask */
case ARIZONA_MIC_BIAS_CTRL_1:
case ARIZONA_MIC_BIAS_CTRL_2:
case ARIZONA_MIC_BIAS_CTRL_3:
+ case ARIZONA_HP_CTRL_1L:
+ case ARIZONA_HP_CTRL_1R:
case ARIZONA_ACCESSORY_DETECT_MODE_1:
case ARIZONA_HEADPHONE_DETECT_1:
case ARIZONA_HEADPHONE_DETECT_2:
case ARIZONA_INTERRUPT_STATUS_4:
case ARIZONA_INTERRUPT_STATUS_5:
case ARIZONA_INTERRUPT_STATUS_1_MASK:
+ case ARIZONA_INTERRUPT_STATUS_2_MASK:
case ARIZONA_INTERRUPT_STATUS_3_MASK:
case ARIZONA_INTERRUPT_STATUS_4_MASK:
case ARIZONA_INTERRUPT_STATUS_5_MASK:
case ARIZONA_SAMPLE_RATE_3_STATUS:
case ARIZONA_ASYNC_SAMPLE_RATE_1_STATUS:
case ARIZONA_MIC_DETECT_3:
+ case ARIZONA_HP_CTRL_1L:
+ case ARIZONA_HP_CTRL_1R:
case ARIZONA_HEADPHONE_DETECT_2:
case ARIZONA_INPUT_ENABLES_STATUS:
case ARIZONA_OUTPUT_STATUS_1:
config ATMEL_TCB_CLKSRC_BLOCK
int
depends on ATMEL_TCB_CLKSRC
- prompt "TC Block" if ARCH_AT91RM9200 || ARCH_AT91SAM9260 || CPU_AT32AP700X
+ prompt "TC Block" if CPU_AT32AP700X
default 0
range 0 1
help
#include "cxl.h"
-static struct cxl_sste* find_free_sste(struct cxl_sste *primary_group,
- bool sec_hash,
- struct cxl_sste *secondary_group,
- unsigned int *lru)
+static bool sste_matches(struct cxl_sste *sste, struct copro_slb *slb)
{
- unsigned int i, entry;
- struct cxl_sste *sste, *group = primary_group;
-
- for (i = 0; i < 2; i++) {
- for (entry = 0; entry < 8; entry++) {
- sste = group + entry;
- if (!(be64_to_cpu(sste->esid_data) & SLB_ESID_V))
- return sste;
- }
- if (!sec_hash)
- break;
- group = secondary_group;
+ return ((sste->vsid_data == cpu_to_be64(slb->vsid)) &&
+ (sste->esid_data == cpu_to_be64(slb->esid)));
+}
+
+/*
+ * This finds a free SSTE for the given SLB, or returns NULL if it's already in
+ * the segment table.
+ */
+static struct cxl_sste* find_free_sste(struct cxl_context *ctx,
+ struct copro_slb *slb)
+{
+ struct cxl_sste *primary, *sste, *ret = NULL;
+ unsigned int mask = (ctx->sst_size >> 7) - 1; /* SSTP0[SegTableSize] */
+ unsigned int entry;
+ unsigned int hash;
+
+ if (slb->vsid & SLB_VSID_B_1T)
+ hash = (slb->esid >> SID_SHIFT_1T) & mask;
+ else /* 256M */
+ hash = (slb->esid >> SID_SHIFT) & mask;
+
+ primary = ctx->sstp + (hash << 3);
+
+ for (entry = 0, sste = primary; entry < 8; entry++, sste++) {
+ if (!ret && !(be64_to_cpu(sste->esid_data) & SLB_ESID_V))
+ ret = sste;
+ if (sste_matches(sste, slb))
+ return NULL;
}
+ if (ret)
+ return ret;
+
/* Nothing free, select an entry to cast out */
- if (sec_hash && (*lru & 0x8))
- sste = secondary_group + (*lru & 0x7);
- else
- sste = primary_group + (*lru & 0x7);
- *lru = (*lru + 1) & 0xf;
+ ret = primary + ctx->sst_lru;
+ ctx->sst_lru = (ctx->sst_lru + 1) & 0x7;
- return sste;
+ return ret;
}
static void cxl_load_segment(struct cxl_context *ctx, struct copro_slb *slb)
{
/* mask is the group index, we search primary and secondary here. */
- unsigned int mask = (ctx->sst_size >> 7)-1; /* SSTP0[SegTableSize] */
- bool sec_hash = 1;
struct cxl_sste *sste;
- unsigned int hash;
unsigned long flags;
-
- sec_hash = !!(cxl_p1n_read(ctx->afu, CXL_PSL_SR_An) & CXL_PSL_SR_An_SC);
-
- if (slb->vsid & SLB_VSID_B_1T)
- hash = (slb->esid >> SID_SHIFT_1T) & mask;
- else /* 256M */
- hash = (slb->esid >> SID_SHIFT) & mask;
-
spin_lock_irqsave(&ctx->sste_lock, flags);
- sste = find_free_sste(ctx->sstp + (hash << 3), sec_hash,
- ctx->sstp + ((~hash & mask) << 3), &ctx->sst_lru);
+ sste = find_free_sste(ctx, slb);
+ if (!sste)
+ goto out_unlock;
pr_devel("CXL Populating SST[%li]: %#llx %#llx\n",
sste - ctx->sstp, slb->vsid, slb->esid);
sste->vsid_data = cpu_to_be64(slb->vsid);
sste->esid_data = cpu_to_be64(slb->esid);
+out_unlock:
spin_unlock_irqrestore(&ctx->sste_lock, flags);
}
ctx->elem->haurp = 0; /* disable */
ctx->elem->sdr = cpu_to_be64(mfspr(SPRN_SDR1));
- sr = CXL_PSL_SR_An_SC;
+ sr = 0;
if (ctx->master)
sr |= CXL_PSL_SR_An_MP;
if (mfspr(SPRN_LPCR) & LPCR_TC)
u64 sr;
int rc;
- sr = CXL_PSL_SR_An_SC;
+ sr = 0;
set_endian(sr);
if (ctx->master)
sr |= CXL_PSL_SR_An_MP;
}
/**
- * eeprom_93cx6_read - Read multiple words from eeprom
+ * eeprom_93cx6_read - Read a word from eeprom
* @eeprom: Pointer to eeprom structure
* @word: Word index from where we should start reading
* @data: target pointer where the information will have to be stored
}
EXPORT_SYMBOL_GPL(eeprom_93cx6_multiread);
+/**
+ * eeprom_93cx6_readb - Read a byte from eeprom
+ * @eeprom: Pointer to eeprom structure
+ * @word: Byte index from where we should start reading
+ * @data: target pointer where the information will have to be stored
+ *
+ * This function will read a byte of the eeprom data
+ * into the given data pointer.
+ */
+void eeprom_93cx6_readb(struct eeprom_93cx6 *eeprom, const u8 byte,
+ u8 *data)
+{
+ u16 command;
+ u16 tmp;
+
+ /*
+ * Initialize the eeprom register
+ */
+ eeprom_93cx6_startup(eeprom);
+
+ /*
+ * Select the read opcode and the byte to be read.
+ */
+ command = (PCI_EEPROM_READ_OPCODE << (eeprom->width + 1)) | byte;
+ eeprom_93cx6_write_bits(eeprom, command,
+ PCI_EEPROM_WIDTH_OPCODE + eeprom->width + 1);
+
+ /*
+ * Read the requested 8 bits.
+ */
+ eeprom_93cx6_read_bits(eeprom, &tmp, 8);
+ *data = tmp & 0xff;
+
+ /*
+ * Cleanup eeprom register.
+ */
+ eeprom_93cx6_cleanup(eeprom);
+}
+EXPORT_SYMBOL_GPL(eeprom_93cx6_readb);
+
+/**
+ * eeprom_93cx6_multireadb - Read multiple bytes from eeprom
+ * @eeprom: Pointer to eeprom structure
+ * @byte: Index from where we should start reading
+ * @data: target pointer where the information will have to be stored
+ * @words: Number of bytes that should be read.
+ *
+ * This function will read all requested bytes from the eeprom,
+ * this is done by calling eeprom_93cx6_readb() multiple times.
+ */
+void eeprom_93cx6_multireadb(struct eeprom_93cx6 *eeprom, const u8 byte,
+ u8 *data, const u16 bytes)
+{
+ unsigned int i;
+
+ for (i = 0; i < bytes; i++)
+ eeprom_93cx6_readb(eeprom, byte + i, &data[i]);
+}
+EXPORT_SYMBOL_GPL(eeprom_93cx6_multireadb);
+
/**
* eeprom_93cx6_wren - set the write enable state
* @eeprom: Pointer to eeprom structure
EXPORT_SYMBOL_GPL(enclosure_unregister);
#define ENCLOSURE_NAME_SIZE 64
+#define COMPONENT_NAME_SIZE 64
static void enclosure_link_name(struct enclosure_component *cdev, char *name)
{
put_device(dev->parent);
}
+static struct enclosure_component *
+enclosure_component_find_by_name(struct enclosure_device *edev,
+ const char *name)
+{
+ int i;
+ const char *cname;
+ struct enclosure_component *ecomp;
+
+ if (!edev || !name || !name[0])
+ return NULL;
+
+ for (i = 0; i < edev->components; i++) {
+ ecomp = &edev->component[i];
+ cname = dev_name(&ecomp->cdev);
+ if (ecomp->number != -1 &&
+ cname && cname[0] &&
+ !strcmp(cname, name))
+ return ecomp;
+ }
+
+ return NULL;
+}
+
static const struct attribute_group *enclosure_component_groups[];
/**
{
struct enclosure_component *ecomp;
struct device *cdev;
- int err;
+ int err, i;
+ char newname[COMPONENT_NAME_SIZE];
if (number >= edev->components)
return ERR_PTR(-EINVAL);
ecomp->number = number;
cdev = &ecomp->cdev;
cdev->parent = get_device(&edev->edev);
- if (name && name[0])
- dev_set_name(cdev, "%s", name);
- else
+
+ if (name && name[0]) {
+ /* Some hardware (e.g. enclosure in RX300 S6) has components
+ * with non unique names. Registering duplicates in sysfs
+ * will lead to warnings during bootup. So make the names
+ * unique by appending consecutive numbers -1, -2, ... */
+ i = 1;
+ snprintf(newname, COMPONENT_NAME_SIZE,
+ "%s", name);
+ while (enclosure_component_find_by_name(edev, newname))
+ snprintf(newname, COMPONENT_NAME_SIZE,
+ "%s-%i", name, i++);
+ dev_set_name(cdev, "%s", newname);
+ } else
dev_set_name(cdev, "%u", number);
cdev->release = enclosure_component_release;
static struct regmap *vexpress_syscfg_regmap_init(struct device *dev,
void *context)
{
- struct platform_device *pdev = to_platform_device(dev);
+ int err;
struct vexpress_syscfg *syscfg = context;
struct vexpress_syscfg_func *func;
struct property *prop;
u32 site, position, dcc;
int i;
- if (dev->of_node) {
- int err = vexpress_config_get_topo(dev->of_node, &site,
+ err = vexpress_config_get_topo(dev->of_node, &site,
&position, &dcc);
+ if (err)
+ return ERR_PTR(err);
- if (err)
- return ERR_PTR(err);
-
- prop = of_find_property(dev->of_node,
- "arm,vexpress-sysreg,func", NULL);
- if (!prop)
- return ERR_PTR(-EINVAL);
-
- num = prop->length / sizeof(u32) / 2;
- val = prop->value;
- } else {
- if (pdev->num_resources != 1 ||
- pdev->resource[0].flags != IORESOURCE_BUS)
- return ERR_PTR(-EFAULT);
-
- site = pdev->resource[0].start;
- if (site == VEXPRESS_SITE_MASTER)
- site = vexpress_config_get_master();
- position = 0;
- dcc = 0;
- num = 1;
- }
+ prop = of_find_property(dev->of_node,
+ "arm,vexpress-sysreg,func", NULL);
+ if (!prop)
+ return ERR_PTR(-EINVAL);
+
+ num = prop->length / sizeof(u32) / 2;
+ val = prop->value;
/*
* "arm,vexpress-energy" function used to be described
for (i = 0; i < num; i++) {
u32 function, device;
- if (dev->of_node) {
- function = be32_to_cpup(val++);
- device = be32_to_cpup(val++);
- } else {
- function = pdev->resource[0].end;
- device = pdev->id;
- }
+ function = be32_to_cpup(val++);
+ device = be32_to_cpup(val++);
dev_dbg(dev, "func %p: %u/%u/%u/%u/%u\n",
func, site, position, dcc,
};
-/* Non-DT hack, to be gone... */
-static struct device *vexpress_syscfg_bridge;
-
-int vexpress_syscfg_device_register(struct platform_device *pdev)
-{
- pdev->dev.parent = vexpress_syscfg_bridge;
-
- return platform_device_register(pdev);
-}
-
-
static int vexpress_syscfg_probe(struct platform_device *pdev)
{
struct vexpress_syscfg *syscfg;
if (IS_ERR(bridge))
return PTR_ERR(bridge);
- /* Non-DT case */
- if (!pdev->dev.of_node)
- vexpress_syscfg_bridge = bridge;
-
return 0;
}
/*
* We've only got one major, so number of mmcblk devices is
- * limited to 256 / number of minors per device.
+ * limited to (1 << 20) / number of minors per device. It is also
+ * currently limited by the size of the static bitmaps below.
*/
static int max_devices;
-/* 256 minors, so at most 256 separate devices */
-static DECLARE_BITMAP(dev_use, 256);
-static DECLARE_BITMAP(name_use, 256);
+#define MAX_DEVICES 256
+
+/* TODO: Replace these with struct ida */
+static DECLARE_BITMAP(dev_use, MAX_DEVICES);
+static DECLARE_BITMAP(name_use, MAX_DEVICES);
/*
* There is one mmc_blk_data per slot.
/*
* Only set in main mmc_blk_data associated
- * with mmc_card with mmc_set_drvdata, and keeps
+ * with mmc_card with dev_set_drvdata, and keeps
* track of the current selected device partition.
*/
unsigned int part_curr;
int ret;
struct mmc_blk_data *md = mmc_blk_get(dev_to_disk(dev));
- ret = snprintf(buf, PAGE_SIZE, "%d",
+ ret = snprintf(buf, PAGE_SIZE, "%d\n",
get_disk_ro(dev_to_disk(dev)) ^
md->read_only);
mmc_blk_put(md);
struct mmc_blk_data *md)
{
int ret;
- struct mmc_blk_data *main_md = mmc_get_drvdata(card);
+ struct mmc_blk_data *main_md = dev_get_drvdata(&card->dev);
if (main_md->part_curr == md->part_type)
return 0;
err = mmc_hw_reset(host);
/* Ensure we switch back to the correct partition */
if (err != -EOPNOTSUPP) {
- struct mmc_blk_data *main_md = mmc_get_drvdata(host->card);
+ struct mmc_blk_data *main_md =
+ dev_get_drvdata(&host->card->dev);
int part_err;
main_md->part_curr = main_md->part_type;
}
if (status & R1_EXCEPTION_EVENT) {
- ext_csd = kzalloc(512, GFP_KERNEL);
- if (!ext_csd) {
- pr_err("%s: unable to allocate buffer for ext_csd\n",
- req->rq_disk->disk_name);
- return -ENOMEM;
- }
-
- err = mmc_send_ext_csd(card, ext_csd);
+ err = mmc_get_ext_csd(card, &ext_csd);
if (err) {
pr_err("%s: error %d sending ext_csd\n",
req->rq_disk->disk_name, err);
- check = MMC_BLK_ABORT;
- goto free;
+ return MMC_BLK_ABORT;
}
if ((ext_csd[EXT_CSD_EXP_EVENTS_STATUS] &
req->rq_disk->disk_name, packed->nr_entries,
packed->blocks, packed->idx_failure);
}
-free:
kfree(ext_csd);
}
/*
* !subname implies we are creating main mmc_blk_data that will be
- * associated with mmc_card with mmc_set_drvdata. Due to device
+ * associated with mmc_card with dev_set_drvdata. Due to device
* partitions, devidx will not coincide with a per-physical card
* index anymore so we keep track of a name index.
*/
END_FIXUP
};
-static int mmc_blk_probe(struct mmc_card *card)
+static int mmc_blk_probe(struct device *dev)
{
+ struct mmc_card *card = mmc_dev_to_card(dev);
struct mmc_blk_data *md, *part_md;
char cap_str[10];
if (mmc_blk_alloc_parts(card, md))
goto out;
- mmc_set_drvdata(card, md);
+ dev_set_drvdata(dev, md);
if (mmc_add_disk(md))
goto out;
return 0;
}
-static void mmc_blk_remove(struct mmc_card *card)
+static int mmc_blk_remove(struct device *dev)
{
- struct mmc_blk_data *md = mmc_get_drvdata(card);
+ struct mmc_card *card = mmc_dev_to_card(dev);
+ struct mmc_blk_data *md = dev_get_drvdata(dev);
mmc_blk_remove_parts(card, md);
pm_runtime_get_sync(&card->dev);
pm_runtime_disable(&card->dev);
pm_runtime_put_noidle(&card->dev);
mmc_blk_remove_req(md);
- mmc_set_drvdata(card, NULL);
+ dev_set_drvdata(dev, NULL);
+
+ return 0;
}
-static int _mmc_blk_suspend(struct mmc_card *card)
+static int _mmc_blk_suspend(struct device *dev)
{
struct mmc_blk_data *part_md;
- struct mmc_blk_data *md = mmc_get_drvdata(card);
+ struct mmc_blk_data *md = dev_get_drvdata(dev);
if (md) {
mmc_queue_suspend(&md->queue);
return 0;
}
-static void mmc_blk_shutdown(struct mmc_card *card)
+static void mmc_blk_shutdown(struct device *dev)
{
- _mmc_blk_suspend(card);
+ _mmc_blk_suspend(dev);
}
-#ifdef CONFIG_PM
-static int mmc_blk_suspend(struct mmc_card *card)
+#ifdef CONFIG_PM_SLEEP
+static int mmc_blk_suspend(struct device *dev)
{
- return _mmc_blk_suspend(card);
+ return _mmc_blk_suspend(dev);
}
-static int mmc_blk_resume(struct mmc_card *card)
+static int mmc_blk_resume(struct device *dev)
{
struct mmc_blk_data *part_md;
- struct mmc_blk_data *md = mmc_get_drvdata(card);
+ struct mmc_blk_data *md = dev_get_drvdata(dev);
if (md) {
/*
}
return 0;
}
-#else
-#define mmc_blk_suspend NULL
-#define mmc_blk_resume NULL
#endif
-static struct mmc_driver mmc_driver = {
- .drv = {
- .name = "mmcblk",
- },
+static SIMPLE_DEV_PM_OPS(mmc_blk_pm_ops, mmc_blk_suspend, mmc_blk_resume);
+
+static struct device_driver mmc_driver = {
+ .name = "mmcblk",
+ .pm = &mmc_blk_pm_ops,
.probe = mmc_blk_probe,
.remove = mmc_blk_remove,
- .suspend = mmc_blk_suspend,
- .resume = mmc_blk_resume,
.shutdown = mmc_blk_shutdown,
};
if (perdev_minors != CONFIG_MMC_BLOCK_MINORS)
pr_info("mmcblk: using %d minors per device\n", perdev_minors);
- max_devices = 256 / perdev_minors;
+ max_devices = min(MAX_DEVICES, (1 << MINORBITS) / perdev_minors);
res = register_blkdev(MMC_BLOCK_MAJOR, "mmc");
if (res)
#include <linux/mmc/host.h>
#include <linux/mmc/mmc.h>
#include <linux/slab.h>
+#include <linux/device.h>
#include <linux/scatterlist.h>
#include <linux/swap.h> /* For nr_free_buffer_pages() */
#define BUFFER_ORDER 2
#define BUFFER_SIZE (PAGE_SIZE << BUFFER_ORDER)
+#define TEST_ALIGN_END 8
+
/*
* Limit the test area size to the maximum MMC HC erase group size. Note that
* the maximum SD allocation unit size is just 4MiB.
int ret, i;
struct scatterlist sg;
- for (i = 1;i < 4;i++) {
+ for (i = 1; i < TEST_ALIGN_END; i++) {
sg_init_one(&sg, test->buffer + i, 512);
ret = mmc_test_transfer(test, &sg, 1, 0, 1, 512, 1);
if (ret)
int ret, i;
struct scatterlist sg;
- for (i = 1;i < 4;i++) {
+ for (i = 1; i < TEST_ALIGN_END; i++) {
sg_init_one(&sg, test->buffer + i, 512);
ret = mmc_test_transfer(test, &sg, 1, 0, 1, 512, 0);
if (ret)
if (size < 1024)
return RESULT_UNSUP_HOST;
- for (i = 1;i < 4;i++) {
+ for (i = 1; i < TEST_ALIGN_END; i++) {
sg_init_one(&sg, test->buffer + i, size);
ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 1);
if (ret)
if (size < 1024)
return RESULT_UNSUP_HOST;
- for (i = 1;i < 4;i++) {
+ for (i = 1; i < TEST_ALIGN_END; i++) {
sg_init_one(&sg, test->buffer + i, size);
ret = mmc_test_transfer(test, &sg, 1, 0, size/512, 512, 0);
if (ret)
return ret;
}
-static int mmc_test_probe(struct mmc_card *card)
+static int mmc_test_probe(struct device *dev)
{
+ struct mmc_card *card = mmc_dev_to_card(dev);
int ret;
if (!mmc_card_mmc(card) && !mmc_card_sd(card))
return 0;
}
-static void mmc_test_remove(struct mmc_card *card)
+static int mmc_test_remove(struct device *dev)
{
+ struct mmc_card *card = mmc_dev_to_card(dev);
+
mmc_test_free_result(card);
mmc_test_free_dbgfs_file(card);
+
+ return 0;
}
-static void mmc_test_shutdown(struct mmc_card *card)
+static void mmc_test_shutdown(struct device *dev)
{
}
-static struct mmc_driver mmc_driver = {
- .drv = {
- .name = "mmc_test",
- },
+static struct device_driver mmc_driver = {
+ .name = "mmc_test",
.probe = mmc_test_probe,
.remove = mmc_test_remove,
.shutdown = mmc_test_shutdown,
if (!mqrq_cur->bounce_buf) {
pr_warn("%s: unable to allocate bounce cur buffer\n",
mmc_card_name(card));
- }
- mqrq_prev->bounce_buf = kmalloc(bouncesz, GFP_KERNEL);
- if (!mqrq_prev->bounce_buf) {
- pr_warn("%s: unable to allocate bounce prev buffer\n",
- mmc_card_name(card));
- kfree(mqrq_cur->bounce_buf);
- mqrq_cur->bounce_buf = NULL;
+ } else {
+ mqrq_prev->bounce_buf =
+ kmalloc(bouncesz, GFP_KERNEL);
+ if (!mqrq_prev->bounce_buf) {
+ pr_warn("%s: unable to allocate bounce prev buffer\n",
+ mmc_card_name(card));
+ kfree(mqrq_cur->bounce_buf);
+ mqrq_cur->bounce_buf = NULL;
+ }
}
}
#include "sdio_cis.h"
#include "bus.h"
-#define to_mmc_driver(d) container_of(d, struct mmc_driver, drv)
-
static ssize_t type_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
return retval;
}
-static int mmc_bus_probe(struct device *dev)
-{
- struct mmc_driver *drv = to_mmc_driver(dev->driver);
- struct mmc_card *card = mmc_dev_to_card(dev);
-
- return drv->probe(card);
-}
-
-static int mmc_bus_remove(struct device *dev)
-{
- struct mmc_driver *drv = to_mmc_driver(dev->driver);
- struct mmc_card *card = mmc_dev_to_card(dev);
-
- drv->remove(card);
-
- return 0;
-}
-
static void mmc_bus_shutdown(struct device *dev)
{
- struct mmc_driver *drv = to_mmc_driver(dev->driver);
struct mmc_card *card = mmc_dev_to_card(dev);
struct mmc_host *host = card->host;
int ret;
- if (dev->driver && drv->shutdown)
- drv->shutdown(card);
+ if (dev->driver && dev->driver->shutdown)
+ dev->driver->shutdown(dev);
if (host->bus_ops->shutdown) {
ret = host->bus_ops->shutdown(host);
#ifdef CONFIG_PM_SLEEP
static int mmc_bus_suspend(struct device *dev)
{
- struct mmc_driver *drv = to_mmc_driver(dev->driver);
struct mmc_card *card = mmc_dev_to_card(dev);
struct mmc_host *host = card->host;
int ret;
- if (dev->driver && drv->suspend) {
- ret = drv->suspend(card);
- if (ret)
- return ret;
- }
+ ret = pm_generic_suspend(dev);
+ if (ret)
+ return ret;
ret = host->bus_ops->suspend(host);
return ret;
static int mmc_bus_resume(struct device *dev)
{
- struct mmc_driver *drv = to_mmc_driver(dev->driver);
struct mmc_card *card = mmc_dev_to_card(dev);
struct mmc_host *host = card->host;
int ret;
pr_warn("%s: error %d during resume (card was removed?)\n",
mmc_hostname(host), ret);
- if (dev->driver && drv->resume)
- ret = drv->resume(card);
-
+ ret = pm_generic_resume(dev);
return ret;
}
#endif
.dev_groups = mmc_dev_groups,
.match = mmc_bus_match,
.uevent = mmc_bus_uevent,
- .probe = mmc_bus_probe,
- .remove = mmc_bus_remove,
.shutdown = mmc_bus_shutdown,
.pm = &mmc_bus_pm_ops,
};
* mmc_register_driver - register a media driver
* @drv: MMC media driver
*/
-int mmc_register_driver(struct mmc_driver *drv)
+int mmc_register_driver(struct device_driver *drv)
{
- drv->drv.bus = &mmc_bus_type;
- return driver_register(&drv->drv);
+ drv->bus = &mmc_bus_type;
+ return driver_register(drv);
}
-
EXPORT_SYMBOL(mmc_register_driver);
/**
* mmc_unregister_driver - unregister a media driver
* @drv: MMC media driver
*/
-void mmc_unregister_driver(struct mmc_driver *drv)
+void mmc_unregister_driver(struct device_driver *drv)
{
- drv->drv.bus = &mmc_bus_type;
- driver_unregister(&drv->drv);
+ drv->bus = &mmc_bus_type;
+ driver_unregister(drv);
}
-
EXPORT_SYMBOL(mmc_unregister_driver);
static void mmc_release_card(struct device *dev)
led_trigger_event(host->led, LED_OFF);
+ if (mrq->sbc) {
+ pr_debug("%s: req done <CMD%u>: %d: %08x %08x %08x %08x\n",
+ mmc_hostname(host), mrq->sbc->opcode,
+ mrq->sbc->error,
+ mrq->sbc->resp[0], mrq->sbc->resp[1],
+ mrq->sbc->resp[2], mrq->sbc->resp[3]);
+ }
+
pr_debug("%s: req done (CMD%u): %d: %08x %08x %08x %08x\n",
mmc_hostname(host), cmd->opcode, err,
cmd->resp[0], cmd->resp[1],
mrq->cmd->error = 0;
mrq->cmd->mrq = mrq;
+ if (mrq->sbc) {
+ mrq->sbc->error = 0;
+ mrq->sbc->mrq = mrq;
+ }
if (mrq->data) {
BUG_ON(mrq->data->blksz > host->max_blk_size);
BUG_ON(mrq->data->blocks > host->max_blk_count);
if (host->card && mmc_card_mmc(host->card) &&
((mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1) ||
(mmc_resp_type(host->areq->mrq->cmd) == MMC_RSP_R1B)) &&
- (host->areq->mrq->cmd->resp[0] & R1_EXCEPTION_EVENT))
+ (host->areq->mrq->cmd->resp[0] & R1_EXCEPTION_EVENT)) {
+
+ /* Cancel the prepared request */
+ if (areq)
+ mmc_post_req(host, areq->mrq, -EINVAL);
+
mmc_start_bkops(host->card, true);
+
+ /* prepare the request again */
+ if (areq)
+ mmc_pre_req(host, areq->mrq, !host->areq);
+ }
}
if (!err && areq)
int err;
u8 *ext_csd;
- /*
- * In future work, we should consider storing the entire ext_csd.
- */
- ext_csd = kmalloc(512, GFP_KERNEL);
- if (!ext_csd) {
- pr_err("%s: could not allocate buffer to receive the ext_csd.\n",
- mmc_hostname(card->host));
- return -ENOMEM;
- }
-
mmc_claim_host(card->host);
- err = mmc_send_ext_csd(card, ext_csd);
+ err = mmc_get_ext_csd(card, &ext_csd);
mmc_release_host(card->host);
if (err)
- goto out;
+ return err;
card->ext_csd.raw_bkops_status = ext_csd[EXT_CSD_BKOPS_STATUS];
card->ext_csd.raw_exception_status = ext_csd[EXT_CSD_EXP_EVENTS_STATUS];
-out:
kfree(ext_csd);
- return err;
+ return 0;
}
EXPORT_SYMBOL(mmc_read_bkops_status);
mmc_host_clk_release(host);
}
+/*
+ * Set initial state after a power cycle or a hw_reset.
+ */
+void mmc_set_initial_state(struct mmc_host *host)
+{
+ if (mmc_host_is_spi(host))
+ host->ios.chip_select = MMC_CS_HIGH;
+ else
+ host->ios.chip_select = MMC_CS_DONTCARE;
+ host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
+ host->ios.bus_width = MMC_BUS_WIDTH_1;
+ host->ios.timing = MMC_TIMING_LEGACY;
+
+ mmc_set_ios(host);
+}
+
/**
* mmc_vdd_to_ocrbitnum - Convert a voltage to the OCR bit number
* @vdd: voltage (mV)
pr_warn("%s: cannot verify signal voltage switch\n",
mmc_hostname(host));
+ mmc_host_clk_hold(host);
+
cmd.opcode = SD_SWITCH_VOLTAGE;
cmd.arg = 0;
cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
err = mmc_wait_for_cmd(host, &cmd, 0);
if (err)
- return err;
+ goto err_command;
- if (!mmc_host_is_spi(host) && (cmd.resp[0] & R1_ERROR))
- return -EIO;
-
- mmc_host_clk_hold(host);
+ if (!mmc_host_is_spi(host) && (cmd.resp[0] & R1_ERROR)) {
+ err = -EIO;
+ goto err_command;
+ }
/*
* The card should drive cmd and dat[0:3] low immediately
* after the response of cmd11, but wait 1 ms to be sure
mmc_power_cycle(host, ocr);
}
+err_command:
mmc_host_clk_release(host);
return err;
mmc_host_clk_hold(host);
host->ios.vdd = fls(ocr) - 1;
- if (mmc_host_is_spi(host))
- host->ios.chip_select = MMC_CS_HIGH;
- else
- host->ios.chip_select = MMC_CS_DONTCARE;
- host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
host->ios.power_mode = MMC_POWER_UP;
- host->ios.bus_width = MMC_BUS_WIDTH_1;
- host->ios.timing = MMC_TIMING_LEGACY;
- mmc_set_ios(host);
+ /* Set initial state and call mmc_set_ios */
+ mmc_set_initial_state(host);
/* Try to set signal voltage to 3.3V but fall back to 1.8v or 1.2v */
if (__mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_330) == 0)
host->ios.clock = 0;
host->ios.vdd = 0;
- if (!mmc_host_is_spi(host)) {
- host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
- host->ios.chip_select = MMC_CS_DONTCARE;
- }
host->ios.power_mode = MMC_POWER_OFF;
- host->ios.bus_width = MMC_BUS_WIDTH_1;
- host->ios.timing = MMC_TIMING_LEGACY;
- mmc_set_ios(host);
+ /* Set initial state and call mmc_set_ios */
+ mmc_set_initial_state(host);
/*
* Some configurations, such as the 802.11 SDIO card in the OLPC
/* If the reset has happened, then a status command will fail */
if (check) {
- struct mmc_command cmd = {0};
- int err;
+ u32 status;
- cmd.opcode = MMC_SEND_STATUS;
- if (!mmc_host_is_spi(card->host))
- cmd.arg = card->rca << 16;
- cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;
- err = mmc_wait_for_cmd(card->host, &cmd, 0);
- if (!err) {
+ if (!mmc_send_status(card, &status)) {
mmc_host_clk_release(host);
return -ENOSYS;
}
}
- if (mmc_host_is_spi(host)) {
- host->ios.chip_select = MMC_CS_HIGH;
- host->ios.bus_mode = MMC_BUSMODE_PUSHPULL;
- } else {
- host->ios.chip_select = MMC_CS_DONTCARE;
- host->ios.bus_mode = MMC_BUSMODE_OPENDRAIN;
- }
- host->ios.bus_width = MMC_BUS_WIDTH_1;
- host->ios.timing = MMC_TIMING_LEGACY;
- mmc_set_ios(host);
+ /* Set initial state and call mmc_set_ios */
+ mmc_set_initial_state(host);
mmc_host_clk_release(host);
void mmc_power_up(struct mmc_host *host, u32 ocr);
void mmc_power_off(struct mmc_host *host);
void mmc_power_cycle(struct mmc_host *host, u32 ocr);
+void mmc_set_initial_state(struct mmc_host *host);
static inline void mmc_delay(unsigned int ms)
{
if (!buf)
return -ENOMEM;
- ext_csd = kmalloc(512, GFP_KERNEL);
- if (!ext_csd) {
- err = -ENOMEM;
- goto out_free;
- }
-
mmc_get_card(card);
- err = mmc_send_ext_csd(card, ext_csd);
+ err = mmc_get_ext_csd(card, &ext_csd);
mmc_put_card(card);
if (err)
goto out_free;
out_free:
kfree(buf);
- kfree(ext_csd);
return err;
}
struct device_node *np;
u32 bus_width;
int len, ret;
- bool cap_invert, gpio_invert;
+ bool cd_cap_invert, cd_gpio_invert = false;
+ bool ro_cap_invert, ro_gpio_invert = false;
if (!host->parent || !host->parent->of_node)
return 0;
if (of_find_property(np, "non-removable", &len)) {
host->caps |= MMC_CAP_NONREMOVABLE;
} else {
- if (of_property_read_bool(np, "cd-inverted"))
- cap_invert = true;
- else
- cap_invert = false;
+ cd_cap_invert = of_property_read_bool(np, "cd-inverted");
if (of_find_property(np, "broken-cd", &len))
host->caps |= MMC_CAP_NEEDS_POLL;
ret = mmc_gpiod_request_cd(host, "cd", 0, true,
- 0, &gpio_invert);
+ 0, &cd_gpio_invert);
if (ret) {
if (ret == -EPROBE_DEFER)
return ret;
* both inverted, the end result is that the CD line is
* not inverted.
*/
- if (cap_invert ^ gpio_invert)
+ if (cd_cap_invert ^ cd_gpio_invert)
host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH;
}
/* Parse Write Protection */
- if (of_property_read_bool(np, "wp-inverted"))
- cap_invert = true;
- else
- cap_invert = false;
+ ro_cap_invert = of_property_read_bool(np, "wp-inverted");
- ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0, &gpio_invert);
+ ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0, &ro_gpio_invert);
if (ret) {
if (ret == -EPROBE_DEFER)
goto out;
dev_info(host->parent, "Got WP GPIO\n");
/* See the comment on CD inversion above */
- if (cap_invert ^ gpio_invert)
+ if (ro_cap_invert ^ ro_gpio_invert)
host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH;
if (of_find_property(np, "cap-sd-highspeed", &len))
return 0;
}
-/*
- * Read extended CSD.
- */
-static int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
-{
- int err;
- u8 *ext_csd;
-
- BUG_ON(!card);
- BUG_ON(!new_ext_csd);
-
- *new_ext_csd = NULL;
-
- if (card->csd.mmca_vsn < CSD_SPEC_VER_4)
- return 0;
-
- /*
- * As the ext_csd is so large and mostly unused, we don't store the
- * raw block in mmc_card.
- */
- ext_csd = kmalloc(512, GFP_KERNEL);
- if (!ext_csd) {
- pr_err("%s: could not allocate a buffer to "
- "receive the ext_csd.\n", mmc_hostname(card->host));
- return -ENOMEM;
- }
-
- err = mmc_send_ext_csd(card, ext_csd);
- if (err) {
- kfree(ext_csd);
- *new_ext_csd = NULL;
-
- /* If the host or the card can't do the switch,
- * fail more gracefully. */
- if ((err != -EINVAL)
- && (err != -ENOSYS)
- && (err != -EFAULT))
- return err;
-
- /*
- * High capacity cards should have this "magic" size
- * stored in their CSD.
- */
- if (card->csd.capacity == (4096 * 512)) {
- pr_err("%s: unable to read EXT_CSD "
- "on a possible high capacity card. "
- "Card will be ignored.\n",
- mmc_hostname(card->host));
- } else {
- pr_warn("%s: unable to read EXT_CSD, performance might suffer\n",
- mmc_hostname(card->host));
- err = 0;
- }
- } else
- *new_ext_csd = ext_csd;
-
- return err;
-}
-
static void mmc_select_card_type(struct mmc_card *card)
{
struct mmc_host *host = card->host;
/*
* Decode extended CSD.
*/
-static int mmc_read_ext_csd(struct mmc_card *card, u8 *ext_csd)
+static int mmc_decode_ext_csd(struct mmc_card *card, u8 *ext_csd)
{
int err = 0, idx;
unsigned int part_size;
- BUG_ON(!card);
-
- if (!ext_csd)
- return 0;
-
/* Version is coded in the CSD_STRUCTURE byte in the EXT_CSD register */
card->ext_csd.raw_ext_csd_structure = ext_csd[EXT_CSD_STRUCTURE];
if (card->csd.structure == 3) {
card->ext_csd.data_sector_size = 512;
}
+ /* eMMC v5 or later */
+ if (card->ext_csd.rev >= 7) {
+ memcpy(card->ext_csd.fwrev, &ext_csd[EXT_CSD_FIRMWARE_VERSION],
+ MMC_FIRMWARE_LEN);
+ card->ext_csd.ffu_capable =
+ (ext_csd[EXT_CSD_SUPPORTED_MODE] & 0x1) &&
+ !(ext_csd[EXT_CSD_FW_CONFIG] & 0x1);
+ }
out:
return err;
}
-static inline void mmc_free_ext_csd(u8 *ext_csd)
+static int mmc_read_ext_csd(struct mmc_card *card)
{
+ u8 *ext_csd;
+ int err;
+
+ if (!mmc_can_ext_csd(card))
+ return 0;
+
+ err = mmc_get_ext_csd(card, &ext_csd);
+ if (err) {
+ /* If the host or the card can't do the switch,
+ * fail more gracefully. */
+ if ((err != -EINVAL)
+ && (err != -ENOSYS)
+ && (err != -EFAULT))
+ return err;
+
+ /*
+ * High capacity cards should have this "magic" size
+ * stored in their CSD.
+ */
+ if (card->csd.capacity == (4096 * 512)) {
+ pr_err("%s: unable to read EXT_CSD on a possible high capacity card. Card will be ignored.\n",
+ mmc_hostname(card->host));
+ } else {
+ pr_warn("%s: unable to read EXT_CSD, performance might suffer\n",
+ mmc_hostname(card->host));
+ err = 0;
+ }
+
+ return err;
+ }
+
+ err = mmc_decode_ext_csd(card, ext_csd);
kfree(ext_csd);
+ return err;
}
-
static int mmc_compare_ext_csds(struct mmc_card *card, unsigned bus_width)
{
u8 *bw_ext_csd;
return 0;
err = mmc_get_ext_csd(card, &bw_ext_csd);
-
- if (err || bw_ext_csd == NULL) {
- err = -EINVAL;
- goto out;
- }
+ if (err)
+ return err;
/* only compare read only fields */
err = !((card->ext_csd.raw_partition_support ==
if (err)
err = -EINVAL;
-out:
- mmc_free_ext_csd(bw_ext_csd);
+ kfree(bw_ext_csd);
return err;
}
MMC_DEV_ATTR(date, "%02d/%04d\n", card->cid.month, card->cid.year);
MMC_DEV_ATTR(erase_size, "%u\n", card->erase_size << 9);
MMC_DEV_ATTR(preferred_erase_size, "%u\n", card->pref_erase << 9);
-MMC_DEV_ATTR(fwrev, "0x%x\n", card->cid.fwrev);
+MMC_DEV_ATTR(ffu_capable, "%d\n", card->ext_csd.ffu_capable);
MMC_DEV_ATTR(hwrev, "0x%x\n", card->cid.hwrev);
MMC_DEV_ATTR(manfid, "0x%06x\n", card->cid.manfid);
MMC_DEV_ATTR(name, "%s\n", card->cid.prod_name);
MMC_DEV_ATTR(raw_rpmb_size_mult, "%#x\n", card->ext_csd.raw_rpmb_size_mult);
MMC_DEV_ATTR(rel_sectors, "%#x\n", card->ext_csd.rel_sectors);
+static ssize_t mmc_fwrev_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct mmc_card *card = mmc_dev_to_card(dev);
+
+ if (card->ext_csd.rev < 7) {
+ return sprintf(buf, "0x%x\n", card->cid.fwrev);
+ } else {
+ return sprintf(buf, "0x%*phN\n", MMC_FIRMWARE_LEN,
+ card->ext_csd.fwrev);
+ }
+}
+
+static DEVICE_ATTR(fwrev, S_IRUGO, mmc_fwrev_show, NULL);
+
static struct attribute *mmc_std_attrs[] = {
&dev_attr_cid.attr,
&dev_attr_csd.attr,
&dev_attr_erase_size.attr,
&dev_attr_preferred_erase_size.attr,
&dev_attr_fwrev.attr,
+ &dev_attr_ffu_capable.attr,
&dev_attr_hwrev.attr,
&dev_attr_manfid.attr,
&dev_attr_name.attr,
unsigned int pwrclass_val = 0;
int err = 0;
- /* Power class selection is supported for versions >= 4.0 */
- if (card->csd.mmca_vsn < CSD_SPEC_VER_4)
- return 0;
-
- /* Power class values are defined only for 4/8 bit bus */
- if (bus_width == EXT_CSD_BUS_WIDTH_1)
- return 0;
-
switch (1 << host->ios.vdd) {
case MMC_VDD_165_195:
if (host->ios.clock <= MMC_HIGH_26_MAX_DTR)
int err, ddr;
/* Power class selection is supported for versions >= 4.0 */
- if (card->csd.mmca_vsn < CSD_SPEC_VER_4)
+ if (!mmc_can_ext_csd(card))
return 0;
bus_width = host->ios.bus_width;
unsigned idx, bus_width = 0;
int err = 0;
- if ((card->csd.mmca_vsn < CSD_SPEC_VER_4) &&
+ if (!mmc_can_ext_csd(card) &&
!(host->caps & (MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)))
return 0;
ext_csd_bits,
card->ext_csd.generic_cmd6_time);
if (err) {
- pr_warn("%s: switch to bus width %d ddr failed\n",
+ pr_err("%s: switch to bus width %d ddr failed\n",
mmc_hostname(host), 1 << bus_width);
return err;
}
card->ext_csd.generic_cmd6_time,
true, true, true);
if (err) {
- pr_warn("%s: switch to high-speed from hs200 failed, err:%d\n",
+ pr_err("%s: switch to high-speed from hs200 failed, err:%d\n",
mmc_hostname(host), err);
return err;
}
EXT_CSD_DDR_BUS_WIDTH_8,
card->ext_csd.generic_cmd6_time);
if (err) {
- pr_warn("%s: switch to bus width for hs400 failed, err:%d\n",
+ pr_err("%s: switch to bus width for hs400 failed, err:%d\n",
mmc_hostname(host), err);
return err;
}
card->ext_csd.generic_cmd6_time,
true, true, true);
if (err) {
- pr_warn("%s: switch to hs400 failed, err:%d\n",
+ pr_err("%s: switch to hs400 failed, err:%d\n",
mmc_hostname(host), err);
return err;
}
{
int err = 0;
- if ((card->csd.mmca_vsn < CSD_SPEC_VER_4 &&
- card->ext_csd.hs_max_dtr == 0))
+ if (!mmc_can_ext_csd(card))
goto bus_speed;
if (card->mmc_avail_type & EXT_CSD_CARD_TYPE_HS200)
mmc_host_clk_release(host);
if (err)
- pr_warn("%s: tuning execution failed\n",
+ pr_err("%s: tuning execution failed\n",
mmc_hostname(host));
}
int err;
u32 cid[4];
u32 rocr;
- u8 *ext_csd = NULL;
BUG_ON(!host);
WARN_ON(!host->claimed);
}
if (!oldcard) {
- /*
- * Fetch and process extended CSD.
- */
-
- err = mmc_get_ext_csd(card, &ext_csd);
- if (err)
- goto free_card;
- err = mmc_read_ext_csd(card, ext_csd);
+ /* Read extended CSD. */
+ err = mmc_read_ext_csd(card);
if (err)
goto free_card;
if (mmc_card_hs200(card)) {
err = mmc_hs200_tuning(card);
if (err)
- goto err;
+ goto free_card;
err = mmc_select_hs400(card);
if (err)
- goto err;
+ goto free_card;
} else if (mmc_card_hs(card)) {
/* Select the desired bus width optionally */
err = mmc_select_bus_width(card);
if (!IS_ERR_VALUE(err)) {
err = mmc_select_hs_ddr(card);
if (err)
- goto err;
+ goto free_card;
}
}
if (!oldcard)
host->card = card;
- mmc_free_ext_csd(ext_csd);
return 0;
free_card:
if (!oldcard)
mmc_remove_card(card);
err:
- mmc_free_ext_csd(ext_csd);
-
return err;
}
struct mmc_command cmd = {0};
struct mmc_data data = {0};
struct scatterlist sg;
- void *data_buf;
- int is_on_stack;
-
- is_on_stack = object_is_on_stack(buf);
- if (is_on_stack) {
- /*
- * dma onto stack is unsafe/nonportable, but callers to this
- * routine normally provide temporary on-stack buffers ...
- */
- data_buf = kmalloc(len, GFP_KERNEL);
- if (!data_buf)
- return -ENOMEM;
- } else
- data_buf = buf;
mrq.cmd = &cmd;
mrq.data = &data;
data.sg = &sg;
data.sg_len = 1;
- sg_init_one(&sg, data_buf, len);
+ sg_init_one(&sg, buf, len);
if (opcode == MMC_SEND_CSD || opcode == MMC_SEND_CID) {
/*
mmc_wait_for_req(host, &mrq);
- if (is_on_stack) {
- memcpy(buf, data_buf, len);
- kfree(data_buf);
- }
-
if (cmd.error)
return cmd.error;
if (data.error)
return mmc_send_cxd_native(card->host, card->rca << 16,
csd, MMC_SEND_CSD);
- csd_tmp = kmalloc(16, GFP_KERNEL);
+ csd_tmp = kzalloc(16, GFP_KERNEL);
if (!csd_tmp)
return -ENOMEM;
cid, MMC_SEND_CID);
}
- cid_tmp = kmalloc(16, GFP_KERNEL);
+ cid_tmp = kzalloc(16, GFP_KERNEL);
if (!cid_tmp)
return -ENOMEM;
return ret;
}
-int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd)
+int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
{
- return mmc_send_cxd_data(card, card->host, MMC_SEND_EXT_CSD,
- ext_csd, 512);
+ int err;
+ u8 *ext_csd;
+
+ if (!card || !new_ext_csd)
+ return -EINVAL;
+
+ if (!mmc_can_ext_csd(card))
+ return -EOPNOTSUPP;
+
+ /*
+ * As the ext_csd is so large and mostly unused, we don't store the
+ * raw block in mmc_card.
+ */
+ ext_csd = kzalloc(512, GFP_KERNEL);
+ if (!ext_csd)
+ return -ENOMEM;
+
+ err = mmc_send_cxd_data(card, card->host, MMC_SEND_EXT_CSD, ext_csd,
+ 512);
+ if (err)
+ kfree(ext_csd);
+ else
+ *new_ext_csd = ext_csd;
+
+ return err;
}
-EXPORT_SYMBOL_GPL(mmc_send_ext_csd);
+EXPORT_SYMBOL_GPL(mmc_get_ext_csd);
int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp)
{
}
EXPORT_SYMBOL_GPL(mmc_switch);
+int mmc_send_tuning(struct mmc_host *host)
+{
+ struct mmc_request mrq = {NULL};
+ struct mmc_command cmd = {0};
+ struct mmc_data data = {0};
+ struct scatterlist sg;
+ struct mmc_ios *ios = &host->ios;
+ const u8 *tuning_block_pattern;
+ int size, err = 0;
+ u8 *data_buf;
+ u32 opcode;
+
+ if (ios->bus_width == MMC_BUS_WIDTH_8) {
+ tuning_block_pattern = tuning_blk_pattern_8bit;
+ size = sizeof(tuning_blk_pattern_8bit);
+ opcode = MMC_SEND_TUNING_BLOCK_HS200;
+ } else if (ios->bus_width == MMC_BUS_WIDTH_4) {
+ tuning_block_pattern = tuning_blk_pattern_4bit;
+ size = sizeof(tuning_blk_pattern_4bit);
+ opcode = MMC_SEND_TUNING_BLOCK;
+ } else
+ return -EINVAL;
+
+ data_buf = kzalloc(size, GFP_KERNEL);
+ if (!data_buf)
+ return -ENOMEM;
+
+ mrq.cmd = &cmd;
+ mrq.data = &data;
+
+ cmd.opcode = opcode;
+ cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
+
+ data.blksz = size;
+ data.blocks = 1;
+ data.flags = MMC_DATA_READ;
+
+ /*
+ * According to the tuning specs, Tuning process
+ * is normally shorter 40 executions of CMD19,
+ * and timeout value should be shorter than 150 ms
+ */
+ data.timeout_ns = 150 * NSEC_PER_MSEC;
+
+ data.sg = &sg;
+ data.sg_len = 1;
+ sg_init_one(&sg, data_buf, size);
+
+ mmc_wait_for_req(host, &mrq);
+
+ if (cmd.error) {
+ err = cmd.error;
+ goto out;
+ }
+
+ if (data.error) {
+ err = data.error;
+ goto out;
+ }
+
+ if (memcmp(data_buf, tuning_block_pattern, size))
+ err = -EIO;
+
+out:
+ kfree(data_buf);
+ return err;
+}
+EXPORT_SYMBOL_GPL(mmc_send_tuning);
+
static int
mmc_send_bus_test(struct mmc_card *card, struct mmc_host *host, u8 opcode,
u8 len)
return 0;
}
+
+int mmc_can_ext_csd(struct mmc_card *card)
+{
+ return (card && card->csd.mmca_vsn > CSD_SPEC_VER_3);
+}
int mmc_all_send_cid(struct mmc_host *host, u32 *cid);
int mmc_set_relative_addr(struct mmc_card *card);
int mmc_send_csd(struct mmc_card *card, u32 *csd);
-int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd);
int mmc_send_status(struct mmc_card *card, u32 *status);
int mmc_send_cid(struct mmc_host *host, u32 *cid);
int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp);
int mmc_spi_set_crc(struct mmc_host *host, int use_crc);
int mmc_bus_test(struct mmc_card *card, u8 bus_width);
int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status);
+int mmc_can_ext_csd(struct mmc_card *card);
#endif
if (mmc_card_is_removable(host) || !mmc_card_keep_power(host)) {
sdio_reset(host);
mmc_go_idle(host);
- err = mmc_sdio_init_card(host, host->card->ocr, host->card,
- mmc_card_keep_power(host));
+ mmc_send_if_cond(host, host->card->ocr);
+ err = mmc_send_io_op_cond(host, 0, NULL);
+ if (!err)
+ err = mmc_sdio_init_card(host, host->card->ocr,
+ host->card,
+ mmc_card_keep_power(host));
} else if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) {
/* We may have switched to 1-bit mode during suspend */
err = sdio_enable_4bit_bus(host->card);
sdio_reset(host);
mmc_go_idle(host);
- mmc_send_if_cond(host, host->ocr_avail);
+ mmc_send_if_cond(host, host->card->ocr);
ret = mmc_send_io_op_cond(host, 0, NULL);
if (ret)
#include "sdio_cis.h"
#include "sdio_bus.h"
+#define to_sdio_driver(d) container_of(d, struct sdio_driver, drv)
+
/* show configuration fields */
#define sdio_config_attr(field, format_string) \
static ssize_t \
return ret;
}
-#ifdef CONFIG_PM
-
static const struct dev_pm_ops sdio_bus_pm_ops = {
SET_SYSTEM_SLEEP_PM_OPS(pm_generic_suspend, pm_generic_resume)
SET_RUNTIME_PM_OPS(
)
};
-#define SDIO_PM_OPS_PTR (&sdio_bus_pm_ops)
-
-#else /* !CONFIG_PM */
-
-#define SDIO_PM_OPS_PTR NULL
-
-#endif /* !CONFIG_PM */
-
static struct bus_type sdio_bus_type = {
.name = "sdio",
.dev_groups = sdio_dev_groups,
.uevent = sdio_bus_uevent,
.probe = sdio_bus_probe,
.remove = sdio_bus_remove,
- .pm = SDIO_PM_OPS_PTR,
+ .pm = &sdio_bus_pm_ops,
};
int sdio_register_bus(void)
static void sdio_acpi_set_handle(struct sdio_func *func)
{
struct mmc_host *host = func->card->host;
- u64 addr = (host->slotno << 16) | func->num;
+ u64 addr = ((u64)host->slotno << 16) | func->num;
acpi_preset_companion(&func->dev, ACPI_COMPANION(host->parent), addr);
}
config MMC_DW
tristate "Synopsys DesignWare Memory Card Interface"
depends on HAS_DMA
- depends on ARC || ARM || MIPS || COMPILE_TEST
+ depends on ARC || ARM || ARM64 || MIPS || COMPILE_TEST
help
This selects support for the Synopsys DesignWare Mobile Storage IP
block, this provides host support for SD and MMC interfaces, in both
help
This selects support for the SD/MMC Host Controller on
Allwinner sunxi SoCs.
+
+config MMC_TOSHIBA_PCI
+ tristate "Toshiba Type A SD/MMC Card Interface Driver"
+ depends on PCI
+ help
obj-$(CONFIG_MMC_MOXART) += moxart-mmc.o
obj-$(CONFIG_MMC_SUNXI) += sunxi-mmc.o
obj-$(CONFIG_MMC_USDHI6ROL0) += usdhi6rol0.o
+obj-$(CONFIG_MMC_TOSHIBA_PCI) += toshsd.o
obj-$(CONFIG_MMC_REALTEK_PCI) += rtsx_pci_sdmmc.o
obj-$(CONFIG_MMC_REALTEK_USB) += rtsx_usb_sdmmc.o
#include <linux/stat.h>
#include <linux/types.h>
#include <linux/platform_data/atmel.h>
+#include <linux/platform_data/mmc-atmel-mci.h>
#include <linux/mmc/host.h>
#include <linux/mmc/sdio.h>
-#include <mach/atmel-mci.h>
#include <linux/atmel-mci.h>
#include <linux/atmel_pdc.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/pinctrl/consumer.h>
#include <asm/cacheflush.h>
#include <asm/io.h>
#include "atmel-mci-regs.h"
+#define AUTOSUSPEND_DELAY 50
+
#define ATMCI_DATA_ERROR_FLAGS (ATMCI_DCRCE | ATMCI_DTOE | ATMCI_OVRE | ATMCI_UNRE)
#define ATMCI_DMA_THRESHOLD 16
if (!buf)
return -ENOMEM;
+ pm_runtime_get_sync(&host->pdev->dev);
+
/*
* Grab a more or less consistent snapshot. Note that we're
* not disabling interrupts, so IMR and SR may not be
* consistent.
*/
- ret = clk_prepare_enable(host->mck);
- if (ret)
- goto out;
-
spin_lock_bh(&host->lock);
memcpy_fromio(buf, host->regs, ATMCI_REGS_SIZE);
spin_unlock_bh(&host->lock);
- clk_disable_unprepare(host->mck);
+ pm_runtime_mark_last_busy(&host->pdev->dev);
+ pm_runtime_put_autosuspend(&host->pdev->dev);
seq_printf(s, "MR:\t0x%08x%s%s ",
buf[ATMCI_MR / 4],
val & ATMCI_CFG_LSYNC ? " LSYNC" : "");
}
-out:
kfree(buf);
return ret;
pdata->slot[slot_id].detect_is_active_high =
of_property_read_bool(cnp, "cd-inverted");
+ pdata->slot[slot_id].non_removable =
+ of_property_read_bool(cnp, "non-removable");
+
pdata->slot[slot_id].wp_pin =
of_get_named_gpio(cnp, "wp-gpios", 0);
}
WARN_ON(slot->mrq);
dev_dbg(&host->pdev->dev, "MRQ: cmd %u\n", mrq->cmd->opcode);
+ pm_runtime_get_sync(&host->pdev->dev);
+
/*
* We may "know" the card is gone even though there's still an
* electrical connection. If so, we really need to communicate
struct atmel_mci_slot *slot = mmc_priv(mmc);
struct atmel_mci *host = slot->host;
unsigned int i;
- bool unprepare_clk;
+
+ pm_runtime_get_sync(&host->pdev->dev);
slot->sdc_reg &= ~ATMCI_SDCBUS_MASK;
switch (ios->bus_width) {
unsigned int clock_min = ~0U;
u32 clkdiv;
- clk_prepare(host->mck);
- unprepare_clk = true;
-
spin_lock_bh(&host->lock);
if (!host->mode_reg) {
- clk_enable(host->mck);
- unprepare_clk = false;
atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN);
if (host->caps.has_cfg_reg)
} else {
bool any_slot_active = false;
- unprepare_clk = false;
-
spin_lock_bh(&host->lock);
slot->clock = 0;
for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) {
atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
if (host->mode_reg) {
atmci_readl(host, ATMCI_MR);
- clk_disable(host->mck);
- unprepare_clk = true;
}
host->mode_reg = 0;
}
spin_unlock_bh(&host->lock);
}
- if (unprepare_clk)
- clk_unprepare(host->mck);
-
switch (ios->power_mode) {
case MMC_POWER_OFF:
if (!IS_ERR(mmc->supply.vmmc))
*/
break;
}
+
+ pm_runtime_mark_last_busy(&host->pdev->dev);
+ pm_runtime_put_autosuspend(&host->pdev->dev);
}
static int atmci_get_ro(struct mmc_host *mmc)
spin_unlock(&host->lock);
mmc_request_done(prev_mmc, mrq);
spin_lock(&host->lock);
+
+ pm_runtime_mark_last_busy(&host->pdev->dev);
+ pm_runtime_put_autosuspend(&host->pdev->dev);
}
static void atmci_command_complete(struct atmel_mci *host,
return IRQ_HANDLED;
}
-static int __init atmci_init_slot(struct atmel_mci *host,
+static int atmci_init_slot(struct atmel_mci *host,
struct mci_slot_pdata *slot_data, unsigned int id,
u32 sdc_reg, u32 sdio_irq)
{
}
}
- if (!gpio_is_valid(slot->detect_pin))
- mmc->caps |= MMC_CAP_NEEDS_POLL;
+ if (!gpio_is_valid(slot->detect_pin)) {
+ if (slot_data->non_removable)
+ mmc->caps |= MMC_CAP_NONREMOVABLE;
+ else
+ mmc->caps |= MMC_CAP_NEEDS_POLL;
+ }
if (gpio_is_valid(slot->wp_pin)) {
if (devm_gpio_request(&host->pdev->dev, slot->wp_pin,
mmc_free_host(slot->mmc);
}
-static bool atmci_filter(struct dma_chan *chan, void *pdata)
+static int atmci_configure_dma(struct atmel_mci *host)
{
- struct mci_platform_data *sl_pdata = pdata;
- struct mci_dma_data *sl;
-
- if (!sl_pdata)
- return false;
+ host->dma.chan = dma_request_slave_channel_reason(&host->pdev->dev,
+ "rxtx");
+ if (IS_ERR(host->dma.chan))
+ return PTR_ERR(host->dma.chan);
+
+ dev_info(&host->pdev->dev, "using %s for DMA transfers\n",
+ dma_chan_name(host->dma.chan));
+
+ host->dma_conf.src_addr = host->mapbase + ATMCI_RDR;
+ host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_conf.src_maxburst = 1;
+ host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR;
+ host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
+ host->dma_conf.dst_maxburst = 1;
+ host->dma_conf.device_fc = false;
- sl = sl_pdata->dma_slave;
- if (sl && find_slave_dev(sl) == chan->device->dev) {
- chan->private = slave_data_ptr(sl);
- return true;
- } else {
- return false;
- }
-}
-
-static bool atmci_configure_dma(struct atmel_mci *host)
-{
- struct mci_platform_data *pdata;
- dma_cap_mask_t mask;
-
- if (host == NULL)
- return false;
-
- pdata = host->pdev->dev.platform_data;
-
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
-
- host->dma.chan = dma_request_slave_channel_compat(mask, atmci_filter, pdata,
- &host->pdev->dev, "rxtx");
- if (!host->dma.chan) {
- dev_warn(&host->pdev->dev, "no DMA channel available\n");
- return false;
- } else {
- dev_info(&host->pdev->dev,
- "using %s for DMA transfers\n",
- dma_chan_name(host->dma.chan));
-
- host->dma_conf.src_addr = host->mapbase + ATMCI_RDR;
- host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- host->dma_conf.src_maxburst = 1;
- host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR;
- host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
- host->dma_conf.dst_maxburst = 1;
- host->dma_conf.device_fc = false;
- return true;
- }
+ return 0;
}
/*
* HSMCI provides DMA support and a new config register but no more supports
* PDC.
*/
-static void __init atmci_get_cap(struct atmel_mci *host)
+static void atmci_get_cap(struct atmel_mci *host)
{
unsigned int version;
}
}
-static int __init atmci_probe(struct platform_device *pdev)
+static int atmci_probe(struct platform_device *pdev)
{
struct mci_platform_data *pdata;
struct atmel_mci *host;
atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST);
host->bus_hz = clk_get_rate(host->mck);
- clk_disable_unprepare(host->mck);
host->mapbase = regs->start;
tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)host);
ret = request_irq(irq, atmci_interrupt, 0, dev_name(&pdev->dev), host);
- if (ret)
+ if (ret) {
+ clk_disable_unprepare(host->mck);
return ret;
+ }
/* Get MCI capabilities and set operations according to it */
atmci_get_cap(host);
- if (atmci_configure_dma(host)) {
+ ret = atmci_configure_dma(host);
+ if (ret == -EPROBE_DEFER)
+ goto err_dma_probe_defer;
+ if (ret == 0) {
host->prepare_data = &atmci_prepare_data_dma;
host->submit_data = &atmci_submit_data_dma;
host->stop_transfer = &atmci_stop_transfer_dma;
setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host);
+ pm_runtime_get_noresume(&pdev->dev);
+ pm_runtime_set_active(&pdev->dev);
+ pm_runtime_set_autosuspend_delay(&pdev->dev, AUTOSUSPEND_DELAY);
+ pm_runtime_use_autosuspend(&pdev->dev);
+ pm_runtime_enable(&pdev->dev);
+
/* We need at least one slot to succeed */
nr_slots = 0;
ret = -ENODEV;
"Atmel MCI controller at 0x%08lx irq %d, %u slots\n",
host->mapbase, irq, nr_slots);
+ pm_runtime_mark_last_busy(&host->pdev->dev);
+ pm_runtime_put_autosuspend(&pdev->dev);
+
return 0;
err_dma_alloc:
atmci_cleanup_slot(host->slot[i], i);
}
err_init_slot:
+ clk_disable_unprepare(host->mck);
+
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
+
del_timer_sync(&host->timer);
- if (host->dma.chan)
+ if (!IS_ERR(host->dma.chan))
dma_release_channel(host->dma.chan);
+err_dma_probe_defer:
free_irq(irq, host);
return ret;
}
-static int __exit atmci_remove(struct platform_device *pdev)
+static int atmci_remove(struct platform_device *pdev)
{
struct atmel_mci *host = platform_get_drvdata(pdev);
unsigned int i;
+ pm_runtime_get_sync(&pdev->dev);
+
if (host->buffer)
dma_free_coherent(&pdev->dev, host->buf_size,
host->buffer, host->buf_phys_addr);
atmci_cleanup_slot(host->slot[i], i);
}
- clk_prepare_enable(host->mck);
atmci_writel(host, ATMCI_IDR, ~0UL);
atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS);
atmci_readl(host, ATMCI_SR);
- clk_disable_unprepare(host->mck);
del_timer_sync(&host->timer);
- if (host->dma.chan)
+ if (!IS_ERR(host->dma.chan))
dma_release_channel(host->dma.chan);
free_irq(platform_get_irq(pdev, 0), host);
+ clk_disable_unprepare(host->mck);
+
+ pm_runtime_disable(&pdev->dev);
+ pm_runtime_put_noidle(&pdev->dev);
+
return 0;
}
-static struct platform_driver atmci_driver = {
- .remove = __exit_p(atmci_remove),
- .driver = {
- .name = "atmel_mci",
- .of_match_table = of_match_ptr(atmci_dt_ids),
- },
-};
-
-static int __init atmci_init(void)
+#ifdef CONFIG_PM
+static int atmci_runtime_suspend(struct device *dev)
{
- return platform_driver_probe(&atmci_driver, atmci_probe);
+ struct atmel_mci *host = dev_get_drvdata(dev);
+
+ clk_disable_unprepare(host->mck);
+
+ pinctrl_pm_select_sleep_state(dev);
+
+ return 0;
}
-static void __exit atmci_exit(void)
+static int atmci_runtime_resume(struct device *dev)
{
- platform_driver_unregister(&atmci_driver);
+ struct atmel_mci *host = dev_get_drvdata(dev);
+
+ pinctrl_pm_select_default_state(dev);
+
+ return clk_prepare_enable(host->mck);
}
+#endif
-late_initcall(atmci_init); /* try to load after dma driver when built-in */
-module_exit(atmci_exit);
+static const struct dev_pm_ops atmci_dev_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+ pm_runtime_force_resume)
+ SET_PM_RUNTIME_PM_OPS(atmci_runtime_suspend, atmci_runtime_resume, NULL)
+};
+
+static struct platform_driver atmci_driver = {
+ .probe = atmci_probe,
+ .remove = atmci_remove,
+ .driver = {
+ .name = "atmel_mci",
+ .of_match_table = of_match_ptr(atmci_dt_ids),
+ .pm = &atmci_dev_pm_ops,
+ },
+};
+module_platform_driver(atmci_driver);
MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver");
MODULE_AUTHOR("Haavard Skinnemoen (Atmel)");
#define NUM_PINS(x) (x + 2)
#define SDMMC_CLKSEL 0x09C
+#define SDMMC_CLKSEL64 0x0A8
#define SDMMC_CLKSEL_CCLK_SAMPLE(x) (((x) & 7) << 0)
#define SDMMC_CLKSEL_CCLK_DRIVE(x) (((x) & 7) << 16)
#define SDMMC_CLKSEL_CCLK_DIVIDER(x) (((x) & 7) << 24)
DW_MCI_TYPE_EXYNOS5250,
DW_MCI_TYPE_EXYNOS5420,
DW_MCI_TYPE_EXYNOS5420_SMU,
+ DW_MCI_TYPE_EXYNOS7,
+ DW_MCI_TYPE_EXYNOS7_SMU,
};
/* Exynos implementation specific driver private data */
}, {
.compatible = "samsung,exynos5420-dw-mshc-smu",
.ctrl_type = DW_MCI_TYPE_EXYNOS5420_SMU,
+ }, {
+ .compatible = "samsung,exynos7-dw-mshc",
+ .ctrl_type = DW_MCI_TYPE_EXYNOS7,
+ }, {
+ .compatible = "samsung,exynos7-dw-mshc-smu",
+ .ctrl_type = DW_MCI_TYPE_EXYNOS7_SMU,
},
};
{
struct dw_mci_exynos_priv_data *priv = host->priv;
- if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS5420_SMU) {
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS5420_SMU ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) {
mci_writel(host, MPSBEGIN0, 0);
mci_writel(host, MPSEND0, DWMCI_BLOCK_NUM);
mci_writel(host, MPSCTRL0, DWMCI_MPSCTRL_SECURE_WRITE_BIT |
static int dw_mci_exynos_resume_noirq(struct device *dev)
{
struct dw_mci *host = dev_get_drvdata(dev);
+ struct dw_mci_exynos_priv_data *priv = host->priv;
u32 clksel;
- clksel = mci_readl(host, CLKSEL);
- if (clksel & SDMMC_CLKSEL_WAKEUP_INT)
- mci_writel(host, CLKSEL, clksel);
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ clksel = mci_readl(host, CLKSEL64);
+ else
+ clksel = mci_readl(host, CLKSEL);
+
+ if (clksel & SDMMC_CLKSEL_WAKEUP_INT) {
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ mci_writel(host, CLKSEL64, clksel);
+ else
+ mci_writel(host, CLKSEL, clksel);
+ }
return 0;
}
static void dw_mci_exynos_prepare_command(struct dw_mci *host, u32 *cmdr)
{
+ struct dw_mci_exynos_priv_data *priv = host->priv;
/*
* Exynos4412 and Exynos5250 extends the use of CMD register with the
* use of bit 29 (which is reserved on standard MSHC controllers) for
* HOLD register should be bypassed in case there is no phase shift
* applied on CMD/DATA that is sent to the card.
*/
- if (SDMMC_CLKSEL_GET_DRV_WD3(mci_readl(host, CLKSEL)))
- *cmdr |= SDMMC_CMD_USE_HOLD_REG;
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU) {
+ if (SDMMC_CLKSEL_GET_DRV_WD3(mci_readl(host, CLKSEL64)))
+ *cmdr |= SDMMC_CMD_USE_HOLD_REG;
+ } else {
+ if (SDMMC_CLKSEL_GET_DRV_WD3(mci_readl(host, CLKSEL)))
+ *cmdr |= SDMMC_CMD_USE_HOLD_REG;
+ }
}
static void dw_mci_exynos_set_ios(struct dw_mci *host, struct mmc_ios *ios)
u8 div = priv->ciu_div + 1;
if (ios->timing == MMC_TIMING_MMC_DDR52) {
- mci_writel(host, CLKSEL, priv->ddr_timing);
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ mci_writel(host, CLKSEL64, priv->ddr_timing);
+ else
+ mci_writel(host, CLKSEL, priv->ddr_timing);
/* Should be double rate for DDR mode */
if (ios->bus_width == MMC_BUS_WIDTH_8)
wanted <<= 1;
} else {
- mci_writel(host, CLKSEL, priv->sdr_timing);
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ mci_writel(host, CLKSEL64, priv->sdr_timing);
+ else
+ mci_writel(host, CLKSEL, priv->sdr_timing);
}
/* Don't care if wanted clock is zero */
static inline u8 dw_mci_exynos_get_clksmpl(struct dw_mci *host)
{
- return SDMMC_CLKSEL_CCLK_SAMPLE(mci_readl(host, CLKSEL));
+ struct dw_mci_exynos_priv_data *priv = host->priv;
+
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ return SDMMC_CLKSEL_CCLK_SAMPLE(mci_readl(host, CLKSEL64));
+ else
+ return SDMMC_CLKSEL_CCLK_SAMPLE(mci_readl(host, CLKSEL));
}
static inline void dw_mci_exynos_set_clksmpl(struct dw_mci *host, u8 sample)
{
u32 clksel;
- clksel = mci_readl(host, CLKSEL);
+ struct dw_mci_exynos_priv_data *priv = host->priv;
+
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ clksel = mci_readl(host, CLKSEL64);
+ else
+ clksel = mci_readl(host, CLKSEL);
clksel = (clksel & ~0x7) | SDMMC_CLKSEL_CCLK_SAMPLE(sample);
- mci_writel(host, CLKSEL, clksel);
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ mci_writel(host, CLKSEL64, clksel);
+ else
+ mci_writel(host, CLKSEL, clksel);
}
static inline u8 dw_mci_exynos_move_next_clksmpl(struct dw_mci *host)
{
+ struct dw_mci_exynos_priv_data *priv = host->priv;
u32 clksel;
u8 sample;
- clksel = mci_readl(host, CLKSEL);
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ clksel = mci_readl(host, CLKSEL64);
+ else
+ clksel = mci_readl(host, CLKSEL);
sample = (clksel + 1) & 0x7;
clksel = (clksel & ~0x7) | sample;
- mci_writel(host, CLKSEL, clksel);
+ if (priv->ctrl_type == DW_MCI_TYPE_EXYNOS7 ||
+ priv->ctrl_type == DW_MCI_TYPE_EXYNOS7_SMU)
+ mci_writel(host, CLKSEL64, clksel);
+ else
+ mci_writel(host, CLKSEL, clksel);
return sample;
}
.data = &exynos_drv_data, },
{ .compatible = "samsung,exynos5420-dw-mshc-smu",
.data = &exynos_drv_data, },
+ { .compatible = "samsung,exynos7-dw-mshc",
+ .data = &exynos_drv_data, },
+ { .compatible = "samsung,exynos7-dw-mshc-smu",
+ .data = &exynos_drv_data, },
{},
};
MODULE_DEVICE_TABLE(of, dw_mci_exynos_match);
.prepare_command = dw_mci_pltfm_prepare_command,
};
+static const struct dw_mci_drv_data pistachio_drv_data = {
+ .prepare_command = dw_mci_pltfm_prepare_command,
+};
+
int dw_mci_pltfm_register(struct platform_device *pdev,
const struct dw_mci_drv_data *drv_data)
{
{ .compatible = "snps,dw-mshc", },
{ .compatible = "altr,socfpga-dw-mshc",
.data = &socfpga_drv_data },
+ { .compatible = "img,pistachio-dw-mshc",
+ .data = &pistachio_drv_data },
{},
};
MODULE_DEVICE_TABLE(of, dw_mci_pltfm_match);
unsigned int cclkin;
u32 bus_hz;
+ if (ios->clock == 0)
+ return;
+
/*
* cclkin: source clock of mmc controller
* bus_hz: card interface clock generated by CLKGEN
}
}
+static int dw_mci_rockchip_init(struct dw_mci *host)
+{
+ /* It is slot 8 on Rockchip SoCs */
+ host->sdio_id0 = 8;
+
+ return 0;
+}
+
static const struct dw_mci_drv_data rk2928_drv_data = {
.prepare_command = dw_mci_rockchip_prepare_command,
+ .init = dw_mci_rockchip_init,
};
static const struct dw_mci_drv_data rk3288_drv_data = {
.prepare_command = dw_mci_rockchip_prepare_command,
.set_ios = dw_mci_rk3288_set_ios,
.setup_clock = dw_mci_rk3288_setup_clock,
+ .init = dw_mci_rockchip_init,
};
static const struct of_device_id dw_mci_rockchip_match[] = {
#include <linux/mmc/dw_mmc.h>
#include <linux/bitops.h>
#include <linux/regulator/consumer.h>
-#include <linux/workqueue.h>
#include <linux/of.h>
#include <linux/of_gpio.h>
#include <linux/mmc/slot-gpio.h>
SDMMC_IDMAC_INT_FBE | SDMMC_IDMAC_INT_RI | \
SDMMC_IDMAC_INT_TI)
+struct idmac_desc_64addr {
+ u32 des0; /* Control Descriptor */
+
+ u32 des1; /* Reserved */
+
+ u32 des2; /*Buffer sizes */
+#define IDMAC_64ADDR_SET_BUFFER1_SIZE(d, s) \
+ ((d)->des2 = ((d)->des2 & 0x03ffe000) | ((s) & 0x1fff))
+
+ u32 des3; /* Reserved */
+
+ u32 des4; /* Lower 32-bits of Buffer Address Pointer 1*/
+ u32 des5; /* Upper 32-bits of Buffer Address Pointer 1*/
+
+ u32 des6; /* Lower 32-bits of Next Descriptor Address */
+ u32 des7; /* Upper 32-bits of Next Descriptor Address */
+};
+
struct idmac_desc {
u32 des0; /* Control Descriptor */
#define IDMAC_DES0_DIC BIT(1)
#endif /* CONFIG_MMC_DW_IDMAC */
static bool dw_mci_reset(struct dw_mci *host);
+static bool dw_mci_ctrl_reset(struct dw_mci *host, u32 reset);
#if defined(CONFIG_DEBUG_FS)
static int dw_mci_req_show(struct seq_file *s, void *v)
unsigned int sg_len)
{
int i;
- struct idmac_desc *desc = host->sg_cpu;
+ if (host->dma_64bit_address == 1) {
+ struct idmac_desc_64addr *desc = host->sg_cpu;
- for (i = 0; i < sg_len; i++, desc++) {
- unsigned int length = sg_dma_len(&data->sg[i]);
- u32 mem_addr = sg_dma_address(&data->sg[i]);
+ for (i = 0; i < sg_len; i++, desc++) {
+ unsigned int length = sg_dma_len(&data->sg[i]);
+ u64 mem_addr = sg_dma_address(&data->sg[i]);
- /* Set the OWN bit and disable interrupts for this descriptor */
- desc->des0 = IDMAC_DES0_OWN | IDMAC_DES0_DIC | IDMAC_DES0_CH;
+ /*
+ * Set the OWN bit and disable interrupts for this
+ * descriptor
+ */
+ desc->des0 = IDMAC_DES0_OWN | IDMAC_DES0_DIC |
+ IDMAC_DES0_CH;
+ /* Buffer length */
+ IDMAC_64ADDR_SET_BUFFER1_SIZE(desc, length);
+
+ /* Physical address to DMA to/from */
+ desc->des4 = mem_addr & 0xffffffff;
+ desc->des5 = mem_addr >> 32;
+ }
- /* Buffer length */
- IDMAC_SET_BUFFER1_SIZE(desc, length);
+ /* Set first descriptor */
+ desc = host->sg_cpu;
+ desc->des0 |= IDMAC_DES0_FD;
- /* Physical address to DMA to/from */
- desc->des2 = mem_addr;
- }
+ /* Set last descriptor */
+ desc = host->sg_cpu + (i - 1) *
+ sizeof(struct idmac_desc_64addr);
+ desc->des0 &= ~(IDMAC_DES0_CH | IDMAC_DES0_DIC);
+ desc->des0 |= IDMAC_DES0_LD;
- /* Set first descriptor */
- desc = host->sg_cpu;
- desc->des0 |= IDMAC_DES0_FD;
+ } else {
+ struct idmac_desc *desc = host->sg_cpu;
+
+ for (i = 0; i < sg_len; i++, desc++) {
+ unsigned int length = sg_dma_len(&data->sg[i]);
+ u32 mem_addr = sg_dma_address(&data->sg[i]);
+
+ /*
+ * Set the OWN bit and disable interrupts for this
+ * descriptor
+ */
+ desc->des0 = IDMAC_DES0_OWN | IDMAC_DES0_DIC |
+ IDMAC_DES0_CH;
+ /* Buffer length */
+ IDMAC_SET_BUFFER1_SIZE(desc, length);
- /* Set last descriptor */
- desc = host->sg_cpu + (i - 1) * sizeof(struct idmac_desc);
- desc->des0 &= ~(IDMAC_DES0_CH | IDMAC_DES0_DIC);
- desc->des0 |= IDMAC_DES0_LD;
+ /* Physical address to DMA to/from */
+ desc->des2 = mem_addr;
+ }
+
+ /* Set first descriptor */
+ desc = host->sg_cpu;
+ desc->des0 |= IDMAC_DES0_FD;
+
+ /* Set last descriptor */
+ desc = host->sg_cpu + (i - 1) * sizeof(struct idmac_desc);
+ desc->des0 &= ~(IDMAC_DES0_CH | IDMAC_DES0_DIC);
+ desc->des0 |= IDMAC_DES0_LD;
+ }
wmb();
}
dw_mci_translate_sglist(host, host->data, sg_len);
+ /* Make sure to reset DMA in case we did PIO before this */
+ dw_mci_ctrl_reset(host, SDMMC_CTRL_DMA_RESET);
+ dw_mci_idmac_reset(host);
+
/* Select IDMAC interface */
temp = mci_readl(host, CTRL);
temp |= SDMMC_CTRL_USE_IDMAC;
static int dw_mci_idmac_init(struct dw_mci *host)
{
- struct idmac_desc *p;
int i;
- /* Number of descriptors in the ring buffer */
- host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc);
+ if (host->dma_64bit_address == 1) {
+ struct idmac_desc_64addr *p;
+ /* Number of descriptors in the ring buffer */
+ host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc_64addr);
+
+ /* Forward link the descriptor list */
+ for (i = 0, p = host->sg_cpu; i < host->ring_size - 1;
+ i++, p++) {
+ p->des6 = (host->sg_dma +
+ (sizeof(struct idmac_desc_64addr) *
+ (i + 1))) & 0xffffffff;
+
+ p->des7 = (u64)(host->sg_dma +
+ (sizeof(struct idmac_desc_64addr) *
+ (i + 1))) >> 32;
+ /* Initialize reserved and buffer size fields to "0" */
+ p->des1 = 0;
+ p->des2 = 0;
+ p->des3 = 0;
+ }
+
+ /* Set the last descriptor as the end-of-ring descriptor */
+ p->des6 = host->sg_dma & 0xffffffff;
+ p->des7 = (u64)host->sg_dma >> 32;
+ p->des0 = IDMAC_DES0_ER;
+
+ } else {
+ struct idmac_desc *p;
+ /* Number of descriptors in the ring buffer */
+ host->ring_size = PAGE_SIZE / sizeof(struct idmac_desc);
- /* Forward link the descriptor list */
- for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++)
- p->des3 = host->sg_dma + (sizeof(struct idmac_desc) * (i + 1));
+ /* Forward link the descriptor list */
+ for (i = 0, p = host->sg_cpu; i < host->ring_size - 1; i++, p++)
+ p->des3 = host->sg_dma + (sizeof(struct idmac_desc) *
+ (i + 1));
- /* Set the last descriptor as the end-of-ring descriptor */
- p->des3 = host->sg_dma;
- p->des0 = IDMAC_DES0_ER;
+ /* Set the last descriptor as the end-of-ring descriptor */
+ p->des3 = host->sg_dma;
+ p->des0 = IDMAC_DES0_ER;
+ }
dw_mci_idmac_reset(host);
- /* Mask out interrupts - get Tx & Rx complete only */
- mci_writel(host, IDSTS, IDMAC_INT_CLR);
- mci_writel(host, IDINTEN, SDMMC_IDMAC_INT_NI | SDMMC_IDMAC_INT_RI |
- SDMMC_IDMAC_INT_TI);
+ if (host->dma_64bit_address == 1) {
+ /* Mask out interrupts - get Tx & Rx complete only */
+ mci_writel(host, IDSTS64, IDMAC_INT_CLR);
+ mci_writel(host, IDINTEN64, SDMMC_IDMAC_INT_NI |
+ SDMMC_IDMAC_INT_RI | SDMMC_IDMAC_INT_TI);
+
+ /* Set the descriptor base address */
+ mci_writel(host, DBADDRL, host->sg_dma & 0xffffffff);
+ mci_writel(host, DBADDRU, (u64)host->sg_dma >> 32);
+
+ } else {
+ /* Mask out interrupts - get Tx & Rx complete only */
+ mci_writel(host, IDSTS, IDMAC_INT_CLR);
+ mci_writel(host, IDINTEN, SDMMC_IDMAC_INT_NI |
+ SDMMC_IDMAC_INT_RI | SDMMC_IDMAC_INT_TI);
+
+ /* Set the descriptor base address */
+ mci_writel(host, DBADDR, host->sg_dma);
+ }
- /* Set the descriptor base address */
- mci_writel(host, DBADDR, host->sg_dma);
return 0;
}
WARN_ON(!(data->flags & MMC_DATA_READ));
+ /*
+ * CDTHRCTL doesn't exist prior to 240A (in fact that register offset is
+ * in the FIFO region, so we really shouldn't access it).
+ */
+ if (host->verid < DW_MMC_240A)
+ return;
+
if (host->timing != MMC_TIMING_MMC_HS200 &&
host->timing != MMC_TIMING_UHS_SDR104)
goto disable;
/* enable clock; only low power if no SDIO */
clk_en_a = SDMMC_CLKEN_ENABLE << slot->id;
- if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->id)))
+ if (!(mci_readl(host, INTMASK) & SDMMC_INT_SDIO(slot->sdio_id)))
clk_en_a |= SDMMC_CLKEN_LOW_PWR << slot->id;
mci_writel(host, CLKENA, clk_en_a);
ret = regulator_set_voltage(mmc->supply.vqmmc, min_uv, max_uv);
if (ret) {
- dev_err(&mmc->class_dev,
+ dev_dbg(&mmc->class_dev,
"Regulator set error %d: %d - %d\n",
ret, min_uv, max_uv);
return ret;
dw_mci_disable_low_power(slot);
mci_writel(host, INTMASK,
- (int_mask | SDMMC_INT_SDIO(slot->id)));
+ (int_mask | SDMMC_INT_SDIO(slot->sdio_id)));
} else {
mci_writel(host, INTMASK,
- (int_mask & ~SDMMC_INT_SDIO(slot->id)));
+ (int_mask & ~SDMMC_INT_SDIO(slot->sdio_id)));
}
}
tasklet_schedule(&host->tasklet);
}
+static void dw_mci_handle_cd(struct dw_mci *host)
+{
+ int i;
+
+ for (i = 0; i < host->num_slots; i++) {
+ struct dw_mci_slot *slot = host->slot[i];
+
+ if (!slot)
+ continue;
+
+ if (slot->mmc->ops->card_event)
+ slot->mmc->ops->card_event(slot->mmc);
+ mmc_detect_change(slot->mmc,
+ msecs_to_jiffies(host->pdata->detect_delay_ms));
+ }
+}
+
static irqreturn_t dw_mci_interrupt(int irq, void *dev_id)
{
struct dw_mci *host = dev_id;
if (pending & SDMMC_INT_CD) {
mci_writel(host, RINTSTS, SDMMC_INT_CD);
- queue_work(host->card_workqueue, &host->card_work);
+ dw_mci_handle_cd(host);
}
/* Handle SDIO Interrupts */
for (i = 0; i < host->num_slots; i++) {
struct dw_mci_slot *slot = host->slot[i];
- if (pending & SDMMC_INT_SDIO(i)) {
- mci_writel(host, RINTSTS, SDMMC_INT_SDIO(i));
+ if (pending & SDMMC_INT_SDIO(slot->sdio_id)) {
+ mci_writel(host, RINTSTS,
+ SDMMC_INT_SDIO(slot->sdio_id));
mmc_signal_sdio_irq(slot->mmc);
}
}
#ifdef CONFIG_MMC_DW_IDMAC
/* Handle DMA interrupts */
- pending = mci_readl(host, IDSTS);
- if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
- mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI);
- mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
- host->dma_ops->complete(host);
+ if (host->dma_64bit_address == 1) {
+ pending = mci_readl(host, IDSTS64);
+ if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
+ mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_TI |
+ SDMMC_IDMAC_INT_RI);
+ mci_writel(host, IDSTS64, SDMMC_IDMAC_INT_NI);
+ host->dma_ops->complete(host);
+ }
+ } else {
+ pending = mci_readl(host, IDSTS);
+ if (pending & (SDMMC_IDMAC_INT_TI | SDMMC_IDMAC_INT_RI)) {
+ mci_writel(host, IDSTS, SDMMC_IDMAC_INT_TI |
+ SDMMC_IDMAC_INT_RI);
+ mci_writel(host, IDSTS, SDMMC_IDMAC_INT_NI);
+ host->dma_ops->complete(host);
+ }
}
#endif
return IRQ_HANDLED;
}
-static void dw_mci_work_routine_card(struct work_struct *work)
-{
- struct dw_mci *host = container_of(work, struct dw_mci, card_work);
- int i;
-
- for (i = 0; i < host->num_slots; i++) {
- struct dw_mci_slot *slot = host->slot[i];
- struct mmc_host *mmc = slot->mmc;
- struct mmc_request *mrq;
- int present;
-
- present = dw_mci_get_cd(mmc);
- while (present != slot->last_detect_state) {
- dev_dbg(&slot->mmc->class_dev, "card %s\n",
- present ? "inserted" : "removed");
-
- spin_lock_bh(&host->lock);
-
- /* Card change detected */
- slot->last_detect_state = present;
-
- /* Clean up queue if present */
- mrq = slot->mrq;
- if (mrq) {
- if (mrq == host->mrq) {
- host->data = NULL;
- host->cmd = NULL;
-
- switch (host->state) {
- case STATE_IDLE:
- case STATE_WAITING_CMD11_DONE:
- break;
- case STATE_SENDING_CMD11:
- case STATE_SENDING_CMD:
- mrq->cmd->error = -ENOMEDIUM;
- if (!mrq->data)
- break;
- /* fall through */
- case STATE_SENDING_DATA:
- mrq->data->error = -ENOMEDIUM;
- dw_mci_stop_dma(host);
- break;
- case STATE_DATA_BUSY:
- case STATE_DATA_ERROR:
- if (mrq->data->error == -EINPROGRESS)
- mrq->data->error = -ENOMEDIUM;
- /* fall through */
- case STATE_SENDING_STOP:
- if (mrq->stop)
- mrq->stop->error = -ENOMEDIUM;
- break;
- }
-
- dw_mci_request_end(host, mrq);
- } else {
- list_del(&slot->queue_node);
- mrq->cmd->error = -ENOMEDIUM;
- if (mrq->data)
- mrq->data->error = -ENOMEDIUM;
- if (mrq->stop)
- mrq->stop->error = -ENOMEDIUM;
-
- spin_unlock(&host->lock);
- mmc_request_done(slot->mmc, mrq);
- spin_lock(&host->lock);
- }
- }
-
- /* Power down slot */
- if (present == 0)
- dw_mci_reset(host);
-
- spin_unlock_bh(&host->lock);
-
- present = dw_mci_get_cd(mmc);
- }
-
- mmc_detect_change(slot->mmc,
- msecs_to_jiffies(host->pdata->detect_delay_ms));
- }
-}
-
#ifdef CONFIG_OF
/* given a slot id, find out the device node representing that slot */
static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 slot)
slot = mmc_priv(mmc);
slot->id = id;
+ slot->sdio_id = host->sdio_id0 + id;
slot->mmc = mmc;
slot->host = host;
host->slot[id] = slot;
dw_mci_init_debugfs(slot);
#endif
- /* Card initially undetected */
- slot->last_detect_state = 0;
-
return 0;
err_host_allocated:
static void dw_mci_init_dma(struct dw_mci *host)
{
+ int addr_config;
+ /* Check ADDR_CONFIG bit in HCON to find IDMAC address bus width */
+ addr_config = (mci_readl(host, HCON) >> 27) & 0x01;
+
+ if (addr_config == 1) {
+ /* host supports IDMAC in 64-bit address mode */
+ host->dma_64bit_address = 1;
+ dev_info(host->dev, "IDMAC supports 64-bit address mode.\n");
+ if (!dma_set_mask(host->dev, DMA_BIT_MASK(64)))
+ dma_set_coherent_mask(host->dev, DMA_BIT_MASK(64));
+ } else {
+ /* host supports IDMAC in 32-bit address mode */
+ host->dma_64bit_address = 0;
+ dev_info(host->dev, "IDMAC supports 32-bit address mode.\n");
+ }
+
/* Alloc memory for sg translation */
host->sg_cpu = dmam_alloc_coherent(host->dev, PAGE_SIZE,
&host->sg_dma, GFP_KERNEL);
host->data_offset = DATA_240A_OFFSET;
tasklet_init(&host->tasklet, dw_mci_tasklet_func, (unsigned long)host);
- host->card_workqueue = alloc_workqueue("dw-mci-card",
- WQ_MEM_RECLAIM, 1);
- if (!host->card_workqueue) {
- ret = -ENOMEM;
- goto err_dmaunmap;
- }
- INIT_WORK(&host->card_work, dw_mci_work_routine_card);
ret = devm_request_irq(host->dev, host->irq, dw_mci_interrupt,
host->irq_flags, "dw-mci", host);
if (ret)
- goto err_workqueue;
+ goto err_dmaunmap;
if (host->pdata->num_slots)
host->num_slots = host->pdata->num_slots;
} else {
dev_dbg(host->dev, "attempted to initialize %d slots, "
"but failed on all\n", host->num_slots);
- goto err_workqueue;
+ goto err_dmaunmap;
}
if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO)
return 0;
-err_workqueue:
- destroy_workqueue(host->card_workqueue);
-
err_dmaunmap:
if (host->use_dma && host->dma_ops->exit)
host->dma_ops->exit(host);
mci_writel(host, CLKENA, 0);
mci_writel(host, CLKSRC, 0);
- destroy_workqueue(host->card_workqueue);
-
if (host->use_dma && host->dma_ops->exit)
host->dma_ops->exit(host);
#define SDMMC_BUFADDR 0x098
#define SDMMC_CDTHRCTL 0x100
#define SDMMC_DATA(x) (x)
+/*
+* Registers to support idmac 64-bit address mode
+*/
+#define SDMMC_DBADDRL 0x088
+#define SDMMC_DBADDRU 0x08c
+#define SDMMC_IDSTS64 0x090
+#define SDMMC_IDINTEN64 0x094
+#define SDMMC_DSCADDRL 0x098
+#define SDMMC_DSCADDRU 0x09c
+#define SDMMC_BUFADDRL 0x0A0
+#define SDMMC_BUFADDRU 0x0A4
/*
* Data offset is difference according to Version
* with CONFIG_MMC_CLKGATE.
* @flags: Random state bits associated with the slot.
* @id: Number of this slot.
- * @last_detect_state: Most recently observed card detect state.
+ * @sdio_id: Number of this slot in the SDIO interrupt registers.
*/
struct dw_mci_slot {
struct mmc_host *mmc;
#define DW_MMC_CARD_PRESENT 0
#define DW_MMC_CARD_NEED_INIT 1
int id;
- int last_detect_state;
+ int sdio_id;
};
struct dw_mci_tuning_data {
chan = host->dma_tx_channel;
dmaengine_terminate_all(chan);
+ if (host->dma_desc_current == next->dma_desc)
+ host->dma_desc_current = NULL;
+
+ if (host->dma_current == next->dma_chan)
+ host->dma_current = NULL;
+
next->dma_desc = NULL;
next->dma_chan = NULL;
+ data->host_cookie = 0;
}
}
if (ret)
goto cmd_irq_free;
- mmc_set_drvdata(pdev, mmc);
+ platform_set_drvdata(pdev, mmc);
mmc_add_host(mmc);
pr_info("%s: Qualcomm MSM SDCC at 0x%016llx irq %d,%d dma %d\n",
static int
msmsdcc_suspend(struct platform_device *dev, pm_message_t state)
{
- struct mmc_host *mmc = mmc_get_drvdata(dev);
+ struct mmc_host *mmc = platform_get_drvdata(dev);
if (mmc) {
struct msmsdcc_host *host = mmc_priv(mmc);
static int
msmsdcc_resume(struct platform_device *dev)
{
- struct mmc_host *mmc = mmc_get_drvdata(dev);
+ struct mmc_host *mmc = platform_get_drvdata(dev);
if (mmc) {
struct msmsdcc_host *host = mmc_priv(mmc);
mvsd_write(MVSD_BLK_COUNT, data->blocks);
mvsd_write(MVSD_BLK_SIZE, data->blksz);
- if (nodma || (data->blksz | data->sg->offset) & 3) {
+ if (nodma || (data->blksz | data->sg->offset) & 3 ||
+ ((!(data->flags & MMC_DATA_READ) && data->sg->offset & 0x3f))) {
/*
* We cannot do DMA on a buffer which offset or size
* is not aligned on a 4-byte boundary.
+ *
+ * It also appears the host to card DMA can corrupt
+ * data when the buffer is not aligned on a 64 byte
+ * boundary.
*/
host->pio_size = data->blocks * data->blksz;
host->pio_ptr = sg_virt(data->sg);
del_timer(&host->watchdog);
stat = mxcmci_readl(host, MMC_REG_STATUS);
- mxcmci_writel(host, stat & ~STATUS_DATA_TRANS_DONE, MMC_REG_STATUS);
dev_dbg(mmc_dev(host->mmc), "%s: 0x%08x\n", __func__, stat);
- if (stat & STATUS_READ_OP_DONE)
- mxcmci_writel(host, STATUS_READ_OP_DONE, MMC_REG_STATUS);
-
mxcmci_data_done(host, stat);
}
sdio_irq = (stat & STATUS_SDIO_INT_ACTIVE) && host->use_sdio;
spin_unlock_irqrestore(&host->lock, flags);
- if (mxcmci_use_dma(host) &&
- (stat & (STATUS_READ_OP_DONE | STATUS_WRITE_OP_DONE)))
- mxcmci_writel(host, STATUS_READ_OP_DONE | STATUS_WRITE_OP_DONE,
- MMC_REG_STATUS);
+ if (mxcmci_use_dma(host) && (stat & (STATUS_WRITE_OP_DONE)))
+ mxcmci_writel(host, STATUS_WRITE_OP_DONE, MMC_REG_STATUS);
if (sdio_irq) {
mxcmci_writel(host, STATUS_SDIO_INT_ACTIVE, MMC_REG_STATUS);
if (stat & STATUS_END_CMD_RESP)
mxcmci_cmd_done(host, stat);
- if (mxcmci_use_dma(host) &&
- (stat & (STATUS_DATA_TRANS_DONE | STATUS_WRITE_OP_DONE))) {
+ if (mxcmci_use_dma(host) && (stat & STATUS_WRITE_OP_DONE)) {
del_timer(&host->watchdog);
mxcmci_data_done(host, stat);
}
dat3_card_detect = true;
ret = mmc_regulator_get_supply(mmc);
- if (ret) {
- if (pdata && ret != -EPROBE_DEFER)
- mmc->ocr_avail = pdata->ocr_avail ? :
- MMC_VDD_32_33 | MMC_VDD_33_34;
+ if (ret == -EPROBE_DEFER)
+ goto out_free;
+
+ if (!mmc->ocr_avail) {
+ if (pdata && pdata->ocr_avail)
+ mmc->ocr_avail = pdata->ocr_avail;
else
- goto out_free;
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
}
if (dat3_card_detect)
struct regulator *reg_vmmc;
struct mxs_ssp *ssp;
- iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq_err = platform_get_irq(pdev, 0);
- if (!iores || irq_err < 0)
- return -EINVAL;
+ if (irq_err < 0)
+ return irq_err;
mmc = mmc_alloc_host(sizeof(struct mxs_mmc_host), &pdev->dev);
if (!mmc)
host = mmc_priv(mmc);
ssp = &host->ssp;
ssp->dev = &pdev->dev;
+ iores = platform_get_resource(pdev, IORESOURCE_MEM, 0);
ssp->base = devm_ioremap_resource(&pdev->dev, iores);
if (IS_ERR(ssp->base)) {
ret = PTR_ERR(ssp->base);
ret = PTR_ERR(ssp->clk);
goto out_mmc_free;
}
- clk_prepare_enable(ssp->clk);
+ ret = clk_prepare_enable(ssp->clk);
+ if (ret)
+ goto out_mmc_free;
ret = mxs_mmc_reset(host);
if (ret) {
platform_set_drvdata(pdev, mmc);
ret = devm_request_irq(&pdev->dev, irq_err, mxs_mmc_irq_handler, 0,
- DRIVER_NAME, host);
+ dev_name(&pdev->dev), host);
if (ret)
goto out_free_dma;
return 0;
}
-#ifdef CONFIG_PM
+#ifdef CONFIG_PM_SLEEP
static int mxs_mmc_suspend(struct device *dev)
{
struct mmc_host *mmc = dev_get_drvdata(dev);
struct mxs_mmc_host *host = mmc_priv(mmc);
struct mxs_ssp *ssp = &host->ssp;
- clk_prepare_enable(ssp->clk);
- return 0;
+ return clk_prepare_enable(ssp->clk);
}
-
-static const struct dev_pm_ops mxs_mmc_pm_ops = {
- .suspend = mxs_mmc_suspend,
- .resume = mxs_mmc_resume,
-};
#endif
+static SIMPLE_DEV_PM_OPS(mxs_mmc_pm_ops, mxs_mmc_suspend, mxs_mmc_resume);
+
static struct platform_driver mxs_mmc_driver = {
.probe = mxs_mmc_probe,
.remove = mxs_mmc_remove,
.id_table = mxs_ssp_ids,
.driver = {
.name = DRIVER_NAME,
-#ifdef CONFIG_PM
.pm = &mxs_mmc_pm_ops,
-#endif
.of_match_table = mxs_mmc_dt_ids,
},
};
#include <linux/regulator/consumer.h>
#include <linux/pinctrl/consumer.h>
#include <linux/pm_runtime.h>
-#include <linux/platform_data/mmc-omap.h>
+#include <linux/platform_data/hsmmc-omap.h>
/* OMAP HSMMC Host Controller Registers */
#define OMAP_HSMMC_SYSSTATUS 0x0014
* omap.c controller driver. Luckily this is not currently done on any known
* omap_hsmmc.c device.
*/
-#define mmc_slot(host) (host->pdata->slots[host->slot_id])
+#define mmc_pdata(host) host->pdata
/*
* MMC Host controller read/write API's
int use_dma, dma_ch;
struct dma_chan *tx_chan;
struct dma_chan *rx_chan;
- int slot_id;
int response_busy;
int context_loss;
int protect_card;
#define HSMMC_SDIO_IRQ_ENABLED (1 << 1) /* SDIO irq enabled */
#define HSMMC_WAKE_IRQ_ENABLED (1 << 2)
struct omap_hsmmc_next next_data;
- struct omap_mmc_platform_data *pdata;
+ struct omap_hsmmc_platform_data *pdata;
+
+ /* To handle board related suspend/resume functionality for MMC */
+ int (*suspend)(struct device *dev);
+ int (*resume)(struct device *dev);
+
+ /* return MMC cover switch state, can be NULL if not supported.
+ *
+ * possible return values:
+ * 0 - closed
+ * 1 - open
+ */
+ int (*get_cover_state)(struct device *dev);
+
+ /* Card detection IRQs */
+ int card_detect_irq;
+
+ int (*card_detect)(struct device *dev);
+ int (*get_ro)(struct device *dev);
+
};
struct omap_mmc_of_data {
static void omap_hsmmc_start_dma_transfer(struct omap_hsmmc_host *host);
-static int omap_hsmmc_card_detect(struct device *dev, int slot)
+static int omap_hsmmc_card_detect(struct device *dev)
{
struct omap_hsmmc_host *host = dev_get_drvdata(dev);
- struct omap_mmc_platform_data *mmc = host->pdata;
+ struct omap_hsmmc_platform_data *mmc = host->pdata;
/* NOTE: assumes card detect signal is active-low */
- return !gpio_get_value_cansleep(mmc->slots[0].switch_pin);
+ return !gpio_get_value_cansleep(mmc->switch_pin);
}
-static int omap_hsmmc_get_wp(struct device *dev, int slot)
+static int omap_hsmmc_get_wp(struct device *dev)
{
struct omap_hsmmc_host *host = dev_get_drvdata(dev);
- struct omap_mmc_platform_data *mmc = host->pdata;
+ struct omap_hsmmc_platform_data *mmc = host->pdata;
/* NOTE: assumes write protect signal is active-high */
- return gpio_get_value_cansleep(mmc->slots[0].gpio_wp);
+ return gpio_get_value_cansleep(mmc->gpio_wp);
}
-static int omap_hsmmc_get_cover_state(struct device *dev, int slot)
+static int omap_hsmmc_get_cover_state(struct device *dev)
{
struct omap_hsmmc_host *host = dev_get_drvdata(dev);
- struct omap_mmc_platform_data *mmc = host->pdata;
+ struct omap_hsmmc_platform_data *mmc = host->pdata;
/* NOTE: assumes card detect signal is active-low */
- return !gpio_get_value_cansleep(mmc->slots[0].switch_pin);
+ return !gpio_get_value_cansleep(mmc->switch_pin);
}
#ifdef CONFIG_PM
-static int omap_hsmmc_suspend_cdirq(struct device *dev, int slot)
+static int omap_hsmmc_suspend_cdirq(struct device *dev)
{
struct omap_hsmmc_host *host = dev_get_drvdata(dev);
- struct omap_mmc_platform_data *mmc = host->pdata;
- disable_irq(mmc->slots[0].card_detect_irq);
+ disable_irq(host->card_detect_irq);
return 0;
}
-static int omap_hsmmc_resume_cdirq(struct device *dev, int slot)
+static int omap_hsmmc_resume_cdirq(struct device *dev)
{
struct omap_hsmmc_host *host = dev_get_drvdata(dev);
- struct omap_mmc_platform_data *mmc = host->pdata;
- enable_irq(mmc->slots[0].card_detect_irq);
+ enable_irq(host->card_detect_irq);
return 0;
}
#ifdef CONFIG_REGULATOR
-static int omap_hsmmc_set_power(struct device *dev, int slot, int power_on,
- int vdd)
+static int omap_hsmmc_set_power(struct device *dev, int power_on, int vdd)
{
struct omap_hsmmc_host *host =
platform_get_drvdata(to_platform_device(dev));
if (!host->vcc)
return 0;
- if (mmc_slot(host).before_set_reg)
- mmc_slot(host).before_set_reg(dev, slot, power_on, vdd);
+ if (mmc_pdata(host)->before_set_reg)
+ mmc_pdata(host)->before_set_reg(dev, power_on, vdd);
if (host->pbias) {
if (host->pbias_enabled == 1) {
}
}
- if (mmc_slot(host).after_set_reg)
- mmc_slot(host).after_set_reg(dev, slot, power_on, vdd);
+ if (mmc_pdata(host)->after_set_reg)
+ mmc_pdata(host)->after_set_reg(dev, power_on, vdd);
error_set_power:
return ret;
} else {
host->vcc = reg;
ocr_value = mmc_regulator_get_ocrmask(reg);
- if (!mmc_slot(host).ocr_mask) {
- mmc_slot(host).ocr_mask = ocr_value;
+ if (!mmc_pdata(host)->ocr_mask) {
+ mmc_pdata(host)->ocr_mask = ocr_value;
} else {
- if (!(mmc_slot(host).ocr_mask & ocr_value)) {
+ if (!(mmc_pdata(host)->ocr_mask & ocr_value)) {
dev_err(host->dev, "ocrmask %x is not supported\n",
- mmc_slot(host).ocr_mask);
- mmc_slot(host).ocr_mask = 0;
+ mmc_pdata(host)->ocr_mask);
+ mmc_pdata(host)->ocr_mask = 0;
return -EINVAL;
}
}
}
- mmc_slot(host).set_power = omap_hsmmc_set_power;
+ mmc_pdata(host)->set_power = omap_hsmmc_set_power;
/* Allow an aux regulator */
reg = devm_regulator_get_optional(host->dev, "vmmc_aux");
host->pbias = IS_ERR(reg) ? NULL : reg;
/* For eMMC do not power off when not in sleep state */
- if (mmc_slot(host).no_regulator_off_init)
+ if (mmc_pdata(host)->no_regulator_off_init)
return 0;
/*
* To disable boot_on regulator, enable regulator
*/
if ((host->vcc && regulator_is_enabled(host->vcc) > 0) ||
(host->vcc_aux && regulator_is_enabled(host->vcc_aux))) {
- int vdd = ffs(mmc_slot(host).ocr_mask) - 1;
+ int vdd = ffs(mmc_pdata(host)->ocr_mask) - 1;
- mmc_slot(host).set_power(host->dev, host->slot_id, 1, vdd);
- mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
+ mmc_pdata(host)->set_power(host->dev, 1, vdd);
+ mmc_pdata(host)->set_power(host->dev, 0, 0);
}
return 0;
static void omap_hsmmc_reg_put(struct omap_hsmmc_host *host)
{
- mmc_slot(host).set_power = NULL;
+ mmc_pdata(host)->set_power = NULL;
}
static inline int omap_hsmmc_have_reg(void)
#endif
-static int omap_hsmmc_gpio_init(struct omap_mmc_platform_data *pdata)
+static int omap_hsmmc_gpio_init(struct omap_hsmmc_host *host,
+ struct omap_hsmmc_platform_data *pdata)
{
int ret;
- if (gpio_is_valid(pdata->slots[0].switch_pin)) {
- if (pdata->slots[0].cover)
- pdata->slots[0].get_cover_state =
- omap_hsmmc_get_cover_state;
+ if (gpio_is_valid(pdata->switch_pin)) {
+ if (pdata->cover)
+ host->get_cover_state =
+ omap_hsmmc_get_cover_state;
else
- pdata->slots[0].card_detect = omap_hsmmc_card_detect;
- pdata->slots[0].card_detect_irq =
- gpio_to_irq(pdata->slots[0].switch_pin);
- ret = gpio_request(pdata->slots[0].switch_pin, "mmc_cd");
+ host->card_detect = omap_hsmmc_card_detect;
+ host->card_detect_irq =
+ gpio_to_irq(pdata->switch_pin);
+ ret = gpio_request(pdata->switch_pin, "mmc_cd");
if (ret)
return ret;
- ret = gpio_direction_input(pdata->slots[0].switch_pin);
+ ret = gpio_direction_input(pdata->switch_pin);
if (ret)
goto err_free_sp;
- } else
- pdata->slots[0].switch_pin = -EINVAL;
+ } else {
+ pdata->switch_pin = -EINVAL;
+ }
- if (gpio_is_valid(pdata->slots[0].gpio_wp)) {
- pdata->slots[0].get_ro = omap_hsmmc_get_wp;
- ret = gpio_request(pdata->slots[0].gpio_wp, "mmc_wp");
+ if (gpio_is_valid(pdata->gpio_wp)) {
+ host->get_ro = omap_hsmmc_get_wp;
+ ret = gpio_request(pdata->gpio_wp, "mmc_wp");
if (ret)
goto err_free_cd;
- ret = gpio_direction_input(pdata->slots[0].gpio_wp);
+ ret = gpio_direction_input(pdata->gpio_wp);
if (ret)
goto err_free_wp;
- } else
- pdata->slots[0].gpio_wp = -EINVAL;
+ } else {
+ pdata->gpio_wp = -EINVAL;
+ }
return 0;
err_free_wp:
- gpio_free(pdata->slots[0].gpio_wp);
+ gpio_free(pdata->gpio_wp);
err_free_cd:
- if (gpio_is_valid(pdata->slots[0].switch_pin))
+ if (gpio_is_valid(pdata->switch_pin))
err_free_sp:
- gpio_free(pdata->slots[0].switch_pin);
+ gpio_free(pdata->switch_pin);
return ret;
}
-static void omap_hsmmc_gpio_free(struct omap_mmc_platform_data *pdata)
+static void omap_hsmmc_gpio_free(struct omap_hsmmc_host *host,
+ struct omap_hsmmc_platform_data *pdata)
{
- if (gpio_is_valid(pdata->slots[0].gpio_wp))
- gpio_free(pdata->slots[0].gpio_wp);
- if (gpio_is_valid(pdata->slots[0].switch_pin))
- gpio_free(pdata->slots[0].switch_pin);
+ if (gpio_is_valid(pdata->gpio_wp))
+ gpio_free(pdata->gpio_wp);
+ if (gpio_is_valid(pdata->switch_pin))
+ gpio_free(pdata->switch_pin);
}
/*
* in capabilities register
* - MMC/SD clock coming out of controller > 25MHz
*/
- if ((mmc_slot(host).features & HSMMC_HAS_HSPE_SUPPORT) &&
+ if ((mmc_pdata(host)->features & HSMMC_HAS_HSPE_SUPPORT) &&
(ios->timing != MMC_TIMING_MMC_DDR52) &&
+ (ios->timing != MMC_TIMING_UHS_DDR50) &&
((OMAP_HSMMC_READ(host->base, CAPA) & HSS) == HSS)) {
regval = OMAP_HSMMC_READ(host->base, HCTL);
if (clkdiv && (clk_get_rate(host->fclk)/clkdiv) > 25000000)
u32 con;
con = OMAP_HSMMC_READ(host->base, CON);
- if (ios->timing == MMC_TIMING_MMC_DDR52)
+ if (ios->timing == MMC_TIMING_MMC_DDR52 ||
+ ios->timing == MMC_TIMING_UHS_DDR50)
con |= DDR; /* configure in DDR mode */
else
con &= ~DDR;
{
int r = 1;
- if (mmc_slot(host).get_cover_state)
- r = mmc_slot(host).get_cover_state(host->dev, host->slot_id);
+ if (host->get_cover_state)
+ r = host->get_cover_state(host->dev);
return r;
}
struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev);
struct omap_hsmmc_host *host = mmc_priv(mmc);
- return sprintf(buf, "%s\n", mmc_slot(host).name);
+ return sprintf(buf, "%s\n", mmc_pdata(host)->name);
}
static DEVICE_ATTR(slot_name, S_IRUGO, omap_hsmmc_show_slot_name, NULL);
* OMAP4 ES2 and greater has an updated reset logic.
* Monitor a 0->1 transition first
*/
- if (mmc_slot(host).features & HSMMC_HAS_UPDATED_RESET) {
+ if (mmc_pdata(host)->features & HSMMC_HAS_UPDATED_RESET) {
while ((!(OMAP_HSMMC_READ(host->base, SYSCTL) & bit))
&& (i++ < limit))
udelay(1);
clk_disable_unprepare(host->dbclk);
/* Turn the power off */
- ret = mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0);
+ ret = mmc_pdata(host)->set_power(host->dev, 0, 0);
/* Turn the power ON with given VDD 1.8 or 3.0v */
if (!ret)
- ret = mmc_slot(host).set_power(host->dev, host->slot_id, 1,
- vdd);
+ ret = mmc_pdata(host)->set_power(host->dev, 1, vdd);
pm_runtime_get_sync(host->dev);
if (host->dbclk)
clk_prepare_enable(host->dbclk);
/* Protect the card while the cover is open */
static void omap_hsmmc_protect_card(struct omap_hsmmc_host *host)
{
- if (!mmc_slot(host).get_cover_state)
+ if (!host->get_cover_state)
return;
host->reqs_blocked = 0;
- if (mmc_slot(host).get_cover_state(host->dev, host->slot_id)) {
+ if (host->get_cover_state(host->dev)) {
if (host->protect_card) {
dev_info(host->dev, "%s: cover is closed, "
"card is now accessible\n",
static irqreturn_t omap_hsmmc_detect(int irq, void *dev_id)
{
struct omap_hsmmc_host *host = dev_id;
- struct omap_mmc_slot_data *slot = &mmc_slot(host);
int carddetect;
sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch");
- if (slot->card_detect)
- carddetect = slot->card_detect(host->dev, host->slot_id);
+ if (host->card_detect)
+ carddetect = host->card_detect(host->dev);
else {
omap_hsmmc_protect_card(host);
carddetect = -ENOSYS;
if (ios->power_mode != host->power_mode) {
switch (ios->power_mode) {
case MMC_POWER_OFF:
- mmc_slot(host).set_power(host->dev, host->slot_id,
- 0, 0);
+ mmc_pdata(host)->set_power(host->dev, 0, 0);
break;
case MMC_POWER_UP:
- mmc_slot(host).set_power(host->dev, host->slot_id,
- 1, ios->vdd);
+ mmc_pdata(host)->set_power(host->dev, 1, ios->vdd);
break;
case MMC_POWER_ON:
do_send_init_stream = 1;
{
struct omap_hsmmc_host *host = mmc_priv(mmc);
- if (!mmc_slot(host).card_detect)
+ if (!host->card_detect)
return -ENOSYS;
- return mmc_slot(host).card_detect(host->dev, host->slot_id);
+ return host->card_detect(host->dev);
}
static int omap_hsmmc_get_ro(struct mmc_host *mmc)
{
struct omap_hsmmc_host *host = mmc_priv(mmc);
- if (!mmc_slot(host).get_ro)
+ if (!host->get_ro)
return -ENOSYS;
- return mmc_slot(host).get_ro(host->dev, 0);
+ return host->get_ro(host->dev);
}
static void omap_hsmmc_init_card(struct mmc_host *mmc, struct mmc_card *card)
{
struct omap_hsmmc_host *host = mmc_priv(mmc);
- if (mmc_slot(host).init_card)
- mmc_slot(host).init_card(card);
+ if (mmc_pdata(host)->init_card)
+ mmc_pdata(host)->init_card(card);
}
static void omap_hsmmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
};
MODULE_DEVICE_TABLE(of, omap_mmc_of_match);
-static struct omap_mmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
+static struct omap_hsmmc_platform_data *of_get_hsmmc_pdata(struct device *dev)
{
- struct omap_mmc_platform_data *pdata;
+ struct omap_hsmmc_platform_data *pdata;
struct device_node *np = dev->of_node;
u32 bus_width, max_freq;
int cd_gpio, wp_gpio;
if (of_find_property(np, "ti,dual-volt", NULL))
pdata->controller_flags |= OMAP_HSMMC_SUPPORTS_DUAL_VOLT;
- /* This driver only supports 1 slot */
- pdata->nr_slots = 1;
- pdata->slots[0].switch_pin = cd_gpio;
- pdata->slots[0].gpio_wp = wp_gpio;
+ pdata->switch_pin = cd_gpio;
+ pdata->gpio_wp = wp_gpio;
if (of_find_property(np, "ti,non-removable", NULL)) {
- pdata->slots[0].nonremovable = true;
- pdata->slots[0].no_regulator_off_init = true;
+ pdata->nonremovable = true;
+ pdata->no_regulator_off_init = true;
}
of_property_read_u32(np, "bus-width", &bus_width);
if (bus_width == 4)
- pdata->slots[0].caps |= MMC_CAP_4_BIT_DATA;
+ pdata->caps |= MMC_CAP_4_BIT_DATA;
else if (bus_width == 8)
- pdata->slots[0].caps |= MMC_CAP_8_BIT_DATA;
+ pdata->caps |= MMC_CAP_8_BIT_DATA;
if (of_find_property(np, "ti,needs-special-reset", NULL))
- pdata->slots[0].features |= HSMMC_HAS_UPDATED_RESET;
+ pdata->features |= HSMMC_HAS_UPDATED_RESET;
if (!of_property_read_u32(np, "max-frequency", &max_freq))
pdata->max_freq = max_freq;
if (of_find_property(np, "ti,needs-special-hs-handling", NULL))
- pdata->slots[0].features |= HSMMC_HAS_HSPE_SUPPORT;
+ pdata->features |= HSMMC_HAS_HSPE_SUPPORT;
if (of_find_property(np, "keep-power-in-suspend", NULL))
- pdata->slots[0].pm_caps |= MMC_PM_KEEP_POWER;
+ pdata->pm_caps |= MMC_PM_KEEP_POWER;
if (of_find_property(np, "enable-sdio-wakeup", NULL))
- pdata->slots[0].pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
+ pdata->pm_caps |= MMC_PM_WAKE_SDIO_IRQ;
return pdata;
}
#else
-static inline struct omap_mmc_platform_data
+static inline struct omap_hsmmc_platform_data
*of_get_hsmmc_pdata(struct device *dev)
{
return ERR_PTR(-EINVAL);
static int omap_hsmmc_probe(struct platform_device *pdev)
{
- struct omap_mmc_platform_data *pdata = pdev->dev.platform_data;
+ struct omap_hsmmc_platform_data *pdata = pdev->dev.platform_data;
struct mmc_host *mmc;
struct omap_hsmmc_host *host = NULL;
struct resource *res;
return -ENXIO;
}
- if (pdata->nr_slots == 0) {
- dev_err(&pdev->dev, "No Slots\n");
- return -ENXIO;
- }
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
if (res == NULL || irq < 0)
if (IS_ERR(base))
return PTR_ERR(base);
- ret = omap_hsmmc_gpio_init(pdata);
- if (ret)
- goto err;
-
mmc = mmc_alloc_host(sizeof(struct omap_hsmmc_host), &pdev->dev);
if (!mmc) {
ret = -ENOMEM;
- goto err_alloc;
+ goto err;
}
host = mmc_priv(mmc);
host->use_dma = 1;
host->dma_ch = -1;
host->irq = irq;
- host->slot_id = 0;
host->mapbase = res->start + pdata->reg_offset;
host->base = base + pdata->reg_offset;
host->power_mode = MMC_POWER_OFF;
host->next_data.cookie = 1;
host->pbias_enabled = 0;
+ ret = omap_hsmmc_gpio_init(host, pdata);
+ if (ret)
+ goto err_gpio;
+
platform_set_drvdata(pdev, host);
if (pdev->dev.of_node)
mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED |
MMC_CAP_WAIT_WHILE_BUSY | MMC_CAP_ERASE;
- mmc->caps |= mmc_slot(host).caps;
+ mmc->caps |= mmc_pdata(host)->caps;
if (mmc->caps & MMC_CAP_8_BIT_DATA)
mmc->caps |= MMC_CAP_4_BIT_DATA;
- if (mmc_slot(host).nonremovable)
+ if (mmc_pdata(host)->nonremovable)
mmc->caps |= MMC_CAP_NONREMOVABLE;
- mmc->pm_caps = mmc_slot(host).pm_caps;
+ mmc->pm_caps = mmc_pdata(host)->pm_caps;
omap_hsmmc_conf_bus_power(host);
goto err_irq;
}
- if (pdata->init != NULL) {
- if (pdata->init(&pdev->dev) != 0) {
- dev_err(mmc_dev(host->mmc),
- "Unable to configure MMC IRQs\n");
- goto err_irq;
- }
- }
-
- if (omap_hsmmc_have_reg() && !mmc_slot(host).set_power) {
+ if (omap_hsmmc_have_reg() && !mmc_pdata(host)->set_power) {
ret = omap_hsmmc_reg_get(host);
if (ret)
- goto err_reg;
+ goto err_irq;
host->use_reg = 1;
}
- mmc->ocr_avail = mmc_slot(host).ocr_mask;
+ mmc->ocr_avail = mmc_pdata(host)->ocr_mask;
/* Request IRQ for card detect */
- if ((mmc_slot(host).card_detect_irq)) {
+ if (host->card_detect_irq) {
ret = devm_request_threaded_irq(&pdev->dev,
- mmc_slot(host).card_detect_irq,
+ host->card_detect_irq,
NULL, omap_hsmmc_detect,
IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_ONESHOT,
mmc_hostname(mmc), host);
"Unable to grab MMC CD IRQ\n");
goto err_irq_cd;
}
- pdata->suspend = omap_hsmmc_suspend_cdirq;
- pdata->resume = omap_hsmmc_resume_cdirq;
+ host->suspend = omap_hsmmc_suspend_cdirq;
+ host->resume = omap_hsmmc_resume_cdirq;
}
omap_hsmmc_disable_irq(host);
mmc_add_host(mmc);
- if (mmc_slot(host).name != NULL) {
+ if (mmc_pdata(host)->name != NULL) {
ret = device_create_file(&mmc->class_dev, &dev_attr_slot_name);
if (ret < 0)
goto err_slot_name;
}
- if (mmc_slot(host).card_detect_irq && mmc_slot(host).get_cover_state) {
+ if (host->card_detect_irq && host->get_cover_state) {
ret = device_create_file(&mmc->class_dev,
&dev_attr_cover_switch);
if (ret < 0)
err_irq_cd:
if (host->use_reg)
omap_hsmmc_reg_put(host);
-err_reg:
- if (host->pdata->cleanup)
- host->pdata->cleanup(&pdev->dev);
err_irq:
if (host->tx_chan)
dma_release_channel(host->tx_chan);
if (host->dbclk)
clk_disable_unprepare(host->dbclk);
err1:
+ omap_hsmmc_gpio_free(host, pdata);
+err_gpio:
mmc_free_host(mmc);
-err_alloc:
- omap_hsmmc_gpio_free(pdata);
err:
return ret;
}
mmc_remove_host(host->mmc);
if (host->use_reg)
omap_hsmmc_reg_put(host);
- if (host->pdata->cleanup)
- host->pdata->cleanup(&pdev->dev);
if (host->tx_chan)
dma_release_channel(host->tx_chan);
if (host->dbclk)
clk_disable_unprepare(host->dbclk);
- omap_hsmmc_gpio_free(host->pdata);
+ omap_hsmmc_gpio_free(host, host->pdata);
mmc_free_host(host->mmc);
return 0;
{
struct omap_hsmmc_host *host = dev_get_drvdata(dev);
- if (host->pdata->suspend)
- return host->pdata->suspend(dev, host->slot_id);
+ if (host->suspend)
+ return host->suspend(dev);
return 0;
}
{
struct omap_hsmmc_host *host = dev_get_drvdata(dev);
- if (host->pdata->resume)
- host->pdata->resume(dev, host->slot_id);
+ if (host->resume)
+ host->resume(dev);
}
const struct sdhci_acpi_slot *slot;
struct platform_device *pdev;
bool use_runtime_pm;
+ bool dma_setup;
};
static inline bool sdhci_acpi_flag(struct sdhci_acpi_host *c, unsigned int flag)
static int sdhci_acpi_enable_dma(struct sdhci_host *host)
{
- return 0;
+ struct sdhci_acpi_host *c = sdhci_priv(host);
+ struct device *dev = &c->pdev->dev;
+ int err = -1;
+
+ if (c->dma_setup)
+ return 0;
+
+ if (host->flags & SDHCI_USE_64_BIT_DMA) {
+ if (host->quirks2 & SDHCI_QUIRK2_BROKEN_64_BIT_DMA) {
+ host->flags &= ~SDHCI_USE_64_BIT_DMA;
+ } else {
+ err = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64));
+ if (err)
+ dev_warn(dev, "Failed to set 64-bit DMA mask\n");
+ }
+ }
+
+ if (err)
+ err = dma_set_mask_and_coherent(dev, DMA_BIT_MASK(32));
+
+ c->dma_setup = !err;
+
+ return err;
}
static void sdhci_acpi_int_hw_reset(struct sdhci_host *host)
static const struct sdhci_acpi_slot sdhci_acpi_slot_int_emmc = {
.chip = &sdhci_acpi_chip_int,
.caps = MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE |
- MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR,
+ MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR |
+ MMC_CAP_BUS_WIDTH_TEST | MMC_CAP_WAIT_WHILE_BUSY,
.caps2 = MMC_CAP2_HC_ERASE_SZ,
.flags = SDHCI_ACPI_RUNTIME_PM,
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | SDHCI_QUIRK2_STOP_WITH_TC,
.probe_slot = sdhci_acpi_emmc_probe_slot,
};
static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sdio = {
- .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION,
+ .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION |
+ SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON,
- .caps = MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD,
+ .caps = MMC_CAP_NONREMOVABLE | MMC_CAP_POWER_OFF_CARD |
+ MMC_CAP_BUS_WIDTH_TEST | MMC_CAP_WAIT_WHILE_BUSY,
.flags = SDHCI_ACPI_RUNTIME_PM,
.pm_caps = MMC_PM_KEEP_POWER,
.probe_slot = sdhci_acpi_sdio_probe_slot,
static const struct sdhci_acpi_slot sdhci_acpi_slot_int_sd = {
.flags = SDHCI_ACPI_SD_CD | SDHCI_ACPI_SD_CD_OVERRIDE_LEVEL |
SDHCI_ACPI_RUNTIME_PM,
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON |
SDHCI_QUIRK2_STOP_WITH_TC,
+ .caps = MMC_CAP_BUS_WIDTH_TEST | MMC_CAP_WAIT_WHILE_BUSY,
.probe_slot = sdhci_acpi_sd_probe_slot,
};
goto err_free;
}
- if (!dev->dma_mask) {
- u64 dma_mask;
-
- if (sdhci_readl(host, SDHCI_CAPABILITIES) & SDHCI_CAN_64BIT) {
- /* 64-bit DMA is not supported at present */
- dma_mask = DMA_BIT_MASK(32);
- } else {
- dma_mask = DMA_BIT_MASK(32);
- }
-
- err = dma_coerce_mask_and_coherent(dev, dma_mask);
- if (err)
- goto err_free;
- }
-
if (c->slot) {
if (c->slot->probe_slot) {
err = c->slot->probe_slot(pdev, hid, uid);
/* NOTE: the minimum valid tuning start tap for mx6sl is 1 */
#define ESDHC_TUNING_START_TAP 0x1
-#define ESDHC_TUNING_BLOCK_PATTERN_LEN 64
-
/* pinctrl state */
#define ESDHC_PINCTRL_STATE_100MHZ "state_100mhz"
#define ESDHC_PINCTRL_STATE_200MHZ "state_200mhz"
/* FIXME: delay a bit for card to be ready for next tuning due to errors */
mdelay(1);
- /* This is balanced by the runtime put in sdhci_tasklet_finish */
- pm_runtime_get_sync(host->mmc->parent);
reg = readl(host->ioaddr + ESDHC_MIX_CTRL);
reg |= ESDHC_MIX_CTRL_EXE_TUNE | ESDHC_MIX_CTRL_SMPCLK_SEL |
ESDHC_MIX_CTRL_FBCLK_SEL;
val, readl(host->ioaddr + ESDHC_TUNE_CTRL_STATUS));
}
-static void esdhc_request_done(struct mmc_request *mrq)
-{
- complete(&mrq->completion);
-}
-
-static int esdhc_send_tuning_cmd(struct sdhci_host *host, u32 opcode,
- struct scatterlist *sg)
-{
- struct mmc_command cmd = {0};
- struct mmc_request mrq = {NULL};
- struct mmc_data data = {0};
-
- cmd.opcode = opcode;
- cmd.arg = 0;
- cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
-
- data.blksz = ESDHC_TUNING_BLOCK_PATTERN_LEN;
- data.blocks = 1;
- data.flags = MMC_DATA_READ;
- data.sg = sg;
- data.sg_len = 1;
-
- mrq.cmd = &cmd;
- mrq.cmd->mrq = &mrq;
- mrq.data = &data;
- mrq.data->mrq = &mrq;
- mrq.cmd->data = mrq.data;
-
- mrq.done = esdhc_request_done;
- init_completion(&(mrq.completion));
-
- spin_lock_irq(&host->lock);
- host->mrq = &mrq;
-
- sdhci_send_command(host, mrq.cmd);
-
- spin_unlock_irq(&host->lock);
-
- wait_for_completion(&mrq.completion);
-
- if (cmd.error)
- return cmd.error;
- if (data.error)
- return data.error;
-
- return 0;
-}
-
static void esdhc_post_tuning(struct sdhci_host *host)
{
u32 reg;
static int esdhc_executing_tuning(struct sdhci_host *host, u32 opcode)
{
- struct scatterlist sg;
- char *tuning_pattern;
int min, max, avg, ret;
- tuning_pattern = kmalloc(ESDHC_TUNING_BLOCK_PATTERN_LEN, GFP_KERNEL);
- if (!tuning_pattern)
- return -ENOMEM;
-
- sg_init_one(&sg, tuning_pattern, ESDHC_TUNING_BLOCK_PATTERN_LEN);
-
/* find the mininum delay first which can pass tuning */
min = ESDHC_TUNE_CTRL_MIN;
while (min < ESDHC_TUNE_CTRL_MAX) {
esdhc_prepare_tuning(host, min);
- if (!esdhc_send_tuning_cmd(host, opcode, &sg))
+ if (!mmc_send_tuning(host->mmc))
break;
min += ESDHC_TUNE_CTRL_STEP;
}
max = min + ESDHC_TUNE_CTRL_STEP;
while (max < ESDHC_TUNE_CTRL_MAX) {
esdhc_prepare_tuning(host, max);
- if (esdhc_send_tuning_cmd(host, opcode, &sg)) {
+ if (mmc_send_tuning(host->mmc)) {
max -= ESDHC_TUNE_CTRL_STEP;
break;
}
/* use average delay to get the best timing */
avg = (min + max) / 2;
esdhc_prepare_tuning(host, avg);
- ret = esdhc_send_tuning_cmd(host, opcode, &sg);
+ ret = mmc_send_tuning(host->mmc);
esdhc_post_tuning(host);
- kfree(tuning_pattern);
-
dev_dbg(mmc_dev(host->mmc), "tunning %s at 0x%x ret %d\n",
ret ? "failed" : "passed", avg, ret);
imx_data->pins_default = pinctrl_lookup_state(imx_data->pinctrl,
PINCTRL_STATE_DEFAULT);
- if (IS_ERR(imx_data->pins_default)) {
- err = PTR_ERR(imx_data->pins_default);
- dev_err(mmc_dev(host->mmc), "could not get default state\n");
- goto disable_clk;
- }
+ if (IS_ERR(imx_data->pins_default))
+ dev_warn(mmc_dev(host->mmc), "could not get default state\n");
host->quirks |= SDHCI_QUIRK_BROKEN_TIMEOUT_VAL;
}
/* sdr50 and sdr104 needs work on 1.8v signal voltage */
- if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data)) {
+ if ((boarddata->support_vsel) && esdhc_is_usdhc(imx_data) &&
+ !IS_ERR(imx_data->pins_default)) {
imx_data->pins_100mhz = pinctrl_lookup_state(imx_data->pinctrl,
ESDHC_PINCTRL_STATE_100MHZ);
imx_data->pins_200mhz = pinctrl_lookup_state(imx_data->pinctrl,
static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode)
{
int tuning_seq_cnt = 3;
- u8 phase, *data_buf, tuned_phases[16], tuned_phase_cnt = 0;
- const u8 *tuning_block_pattern = tuning_blk_pattern_4bit;
- int size = sizeof(tuning_blk_pattern_4bit);
+ u8 phase, tuned_phases[16], tuned_phase_cnt = 0;
int rc;
struct mmc_host *mmc = host->mmc;
struct mmc_ios ios = host->mmc->ios;
(ios.timing == MMC_TIMING_UHS_SDR104)))
return 0;
- if ((opcode == MMC_SEND_TUNING_BLOCK_HS200) &&
- (mmc->ios.bus_width == MMC_BUS_WIDTH_8)) {
- tuning_block_pattern = tuning_blk_pattern_8bit;
- size = sizeof(tuning_blk_pattern_8bit);
- }
-
- data_buf = kmalloc(size, GFP_KERNEL);
- if (!data_buf)
- return -ENOMEM;
-
retry:
/* First of all reset the tuning block */
rc = msm_init_cm_dll(host);
if (rc)
- goto out;
+ return rc;
phase = 0;
do {
- struct mmc_command cmd = { 0 };
- struct mmc_data data = { 0 };
- struct mmc_request mrq = {
- .cmd = &cmd,
- .data = &data
- };
- struct scatterlist sg;
-
/* Set the phase in delay line hw block */
rc = msm_config_cm_dll_phase(host, phase);
if (rc)
- goto out;
+ return rc;
- cmd.opcode = opcode;
- cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;
-
- data.blksz = size;
- data.blocks = 1;
- data.flags = MMC_DATA_READ;
- data.timeout_ns = NSEC_PER_SEC; /* 1 second */
-
- data.sg = &sg;
- data.sg_len = 1;
- sg_init_one(&sg, data_buf, size);
- memset(data_buf, 0, size);
- mmc_wait_for_req(mmc, &mrq);
-
- if (!cmd.error && !data.error &&
- !memcmp(data_buf, tuning_block_pattern, size)) {
+ rc = mmc_send_tuning(mmc);
+ if (!rc) {
/* Tuning is successful at this tuning point */
tuned_phases[tuned_phase_cnt++] = phase;
dev_dbg(mmc_dev(mmc), "%s: Found good phase = %d\n",
rc = msm_find_most_appropriate_phase(host, tuned_phases,
tuned_phase_cnt);
if (rc < 0)
- goto out;
+ return rc;
else
phase = rc;
*/
rc = msm_config_cm_dll_phase(host, phase);
if (rc)
- goto out;
+ return rc;
dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n",
mmc_hostname(mmc), phase);
} else {
rc = -EIO;
}
-out:
- kfree(data_buf);
return rc;
}
host = sdhci_pltfm_init(pdev, &sdhci_arasan_pdata, 0);
if (IS_ERR(host)) {
ret = PTR_ERR(host);
- dev_err(&pdev->dev, "platform init failed (%u)\n", ret);
goto clk_disable_all;
}
pltfm_host->clk = clk_xin;
ret = sdhci_add_host(host);
- if (ret) {
- dev_err(&pdev->dev, "platform register failed (%u)\n", ret);
+ if (ret)
goto err_pltfm_free;
- }
return 0;
return;
scratch_32 &= ~((1 << 21) | (1 << 30));
- /* Set RTD3 function disabled */
- scratch_32 |= ((1 << 29) | (1 << 28));
pci_write_config_dword(chip->pdev, O2_SD_FUNC_REG3, scratch_32);
/* Set L1 Entrance Timer */
static int byt_emmc_probe_slot(struct sdhci_pci_slot *slot)
{
slot->host->mmc->caps |= MMC_CAP_8_BIT_DATA | MMC_CAP_NONREMOVABLE |
- MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR;
+ MMC_CAP_HW_RESET | MMC_CAP_1_8V_DDR |
+ MMC_CAP_BUS_WIDTH_TEST |
+ MMC_CAP_WAIT_WHILE_BUSY;
slot->host->mmc->caps2 |= MMC_CAP2_HC_ERASE_SZ;
slot->hw_reset = sdhci_pci_int_hw_reset;
if (slot->chip->pdev->device == PCI_DEVICE_ID_INTEL_BSW_EMMC)
static int byt_sdio_probe_slot(struct sdhci_pci_slot *slot)
{
- slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_NONREMOVABLE;
+ slot->host->mmc->caps |= MMC_CAP_POWER_OFF_CARD | MMC_CAP_NONREMOVABLE |
+ MMC_CAP_BUS_WIDTH_TEST |
+ MMC_CAP_WAIT_WHILE_BUSY;
return 0;
}
static int byt_sd_probe_slot(struct sdhci_pci_slot *slot)
{
+ slot->host->mmc->caps |= MMC_CAP_BUS_WIDTH_TEST |
+ MMC_CAP_WAIT_WHILE_BUSY;
slot->cd_con_id = NULL;
slot->cd_idx = 0;
slot->cd_override_level = true;
static const struct sdhci_pci_fixes sdhci_intel_byt_emmc = {
.allow_runtime_pm = true,
.probe_slot = byt_emmc_probe_slot,
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
SDHCI_QUIRK2_STOP_WITH_TC,
};
static const struct sdhci_pci_fixes sdhci_intel_byt_sdio = {
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_HOST_OFF_CARD_ON |
SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
.allow_runtime_pm = true,
};
static const struct sdhci_pci_fixes sdhci_intel_byt_sd = {
+ .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC,
.quirks2 = SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON |
SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
SDHCI_QUIRK2_STOP_WITH_TC,
.probe_slot = rtsx_probe_slot,
};
+static int amd_probe(struct sdhci_pci_chip *chip)
+{
+ struct pci_dev *smbus_dev;
+
+ smbus_dev = pci_get_device(PCI_VENDOR_ID_AMD,
+ PCI_DEVICE_ID_AMD_HUDSON2_SMBUS, NULL);
+
+ if (smbus_dev && (smbus_dev->revision < 0x51)) {
+ chip->quirks2 |= SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD;
+ chip->quirks2 |= SDHCI_QUIRK2_BROKEN_HS200;
+ }
+
+ return 0;
+}
+
+static const struct sdhci_pci_fixes sdhci_amd = {
+ .probe = amd_probe,
+};
+
static const struct pci_device_id pci_ids[] = {
{
.vendor = PCI_VENDOR_ID_RICOH,
.subdevice = PCI_ANY_ID,
.driver_data = (kernel_ulong_t)&sdhci_o2,
},
-
+ {
+ .vendor = PCI_VENDOR_ID_AMD,
+ .device = PCI_ANY_ID,
+ .class = PCI_CLASS_SYSTEM_SDHCI << 8,
+ .class_mask = 0xFFFF00,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (kernel_ulong_t)&sdhci_amd,
+ },
{ /* Generic SD host controller */
PCI_DEVICE_CLASS((PCI_CLASS_SYSTEM_SDHCI << 8), 0xFFFF00)
},
{
struct sdhci_pci_slot *slot;
struct pci_dev *pdev;
- int ret;
+ int ret = -1;
slot = sdhci_priv(host);
pdev = slot->chip->pdev;
"doesn't fully claim to support it.\n");
}
- ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ if (host->flags & SDHCI_USE_64_BIT_DMA) {
+ if (host->quirks2 & SDHCI_QUIRK2_BROKEN_64_BIT_DMA) {
+ host->flags &= ~SDHCI_USE_64_BIT_DMA;
+ } else {
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+ if (ret)
+ dev_warn(&pdev->dev, "Failed to set 64-bit DMA mask\n");
+ }
+ }
+ if (ret)
+ ret = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
if (ret)
return ret;
struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data;
struct device *dev = &pdev->dev;
struct sdhci_host *host = NULL;
- struct sdhci_pxa *pxa = NULL;
const struct of_device_id *match;
int ret;
struct clk *clk;
- pxa = kzalloc(sizeof(struct sdhci_pxa), GFP_KERNEL);
- if (!pxa)
- return -ENOMEM;
-
host = sdhci_pltfm_init(pdev, NULL, 0);
- if (IS_ERR(host)) {
- kfree(pxa);
+ if (IS_ERR(host))
return PTR_ERR(host);
- }
+
pltfm_host = sdhci_priv(host);
- pltfm_host->priv = pxa;
+ pltfm_host->priv = NULL;
clk = clk_get(dev, "PXA-SDHCLK");
if (IS_ERR(clk)) {
clk_put(clk);
err_clk_get:
sdhci_pltfm_free(pdev);
- kfree(pxa);
return ret;
}
{
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
- struct sdhci_pxa *pxa = pltfm_host->priv;
sdhci_remove_host(host, 1);
clk_disable_unprepare(pltfm_host->clk);
clk_put(pltfm_host->clk);
sdhci_pltfm_free(pdev);
- kfree(pxa);
return 0;
}
#define SDCE_MISC_INT (1<<2)
#define SDCE_MISC_INT_EN (1<<1)
+struct sdhci_pxa {
+ struct clk *clk_core;
+ struct clk *clk_io;
+ u8 power_mode;
+};
+
/*
* These registers are relative to the second register region, for the
* MBus bridge.
case MMC_TIMING_UHS_SDR104:
ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180;
break;
+ case MMC_TIMING_MMC_DDR52:
case MMC_TIMING_UHS_DDR50:
ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180;
break;
struct sdhci_host *host = NULL;
struct sdhci_pxa *pxa = NULL;
const struct of_device_id *match;
-
int ret;
- struct clk *clk;
pxa = devm_kzalloc(&pdev->dev, sizeof(struct sdhci_pxa), GFP_KERNEL);
if (!pxa)
pltfm_host = sdhci_priv(host);
pltfm_host->priv = pxa;
- clk = devm_clk_get(dev, NULL);
- if (IS_ERR(clk)) {
+ pxa->clk_io = devm_clk_get(dev, "io");
+ if (IS_ERR(pxa->clk_io))
+ pxa->clk_io = devm_clk_get(dev, NULL);
+ if (IS_ERR(pxa->clk_io)) {
dev_err(dev, "failed to get io clock\n");
- ret = PTR_ERR(clk);
+ ret = PTR_ERR(pxa->clk_io);
goto err_clk_get;
}
- pltfm_host->clk = clk;
- clk_prepare_enable(clk);
+ pltfm_host->clk = pxa->clk_io;
+ clk_prepare_enable(pxa->clk_io);
+
+ pxa->clk_core = devm_clk_get(dev, "core");
+ if (!IS_ERR(pxa->clk_core))
+ clk_prepare_enable(pxa->clk_core);
/* enable 1/8V DDR capable */
host->mmc->caps |= MMC_CAP_1_8V_DDR;
pm_runtime_disable(&pdev->dev);
err_of_parse:
err_cd_req:
- clk_disable_unprepare(clk);
+ clk_disable_unprepare(pxa->clk_io);
+ if (!IS_ERR(pxa->clk_core))
+ clk_disable_unprepare(pxa->clk_core);
err_clk_get:
err_mbus_win:
sdhci_pltfm_free(pdev);
{
struct sdhci_host *host = platform_get_drvdata(pdev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_pxa *pxa = pltfm_host->priv;
pm_runtime_get_sync(&pdev->dev);
sdhci_remove_host(host, 1);
pm_runtime_disable(&pdev->dev);
- clk_disable_unprepare(pltfm_host->clk);
+ clk_disable_unprepare(pxa->clk_io);
+ if (!IS_ERR(pxa->clk_core))
+ clk_disable_unprepare(pxa->clk_core);
sdhci_pltfm_free(pdev);
{
struct sdhci_host *host = dev_get_drvdata(dev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_pxa *pxa = pltfm_host->priv;
unsigned long flags;
- if (pltfm_host->clk) {
- spin_lock_irqsave(&host->lock, flags);
- host->runtime_suspended = true;
- spin_unlock_irqrestore(&host->lock, flags);
+ spin_lock_irqsave(&host->lock, flags);
+ host->runtime_suspended = true;
+ spin_unlock_irqrestore(&host->lock, flags);
- clk_disable_unprepare(pltfm_host->clk);
- }
+ clk_disable_unprepare(pxa->clk_io);
+ if (!IS_ERR(pxa->clk_core))
+ clk_disable_unprepare(pxa->clk_core);
return 0;
}
{
struct sdhci_host *host = dev_get_drvdata(dev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_pxa *pxa = pltfm_host->priv;
unsigned long flags;
- if (pltfm_host->clk) {
- clk_prepare_enable(pltfm_host->clk);
+ clk_prepare_enable(pxa->clk_io);
+ if (!IS_ERR(pxa->clk_core))
+ clk_prepare_enable(pxa->clk_core);
- spin_lock_irqsave(&host->lock, flags);
- host->runtime_suspended = false;
- spin_unlock_irqrestore(&host->lock, flags);
- }
+ spin_lock_irqsave(&host->lock, flags);
+ host->runtime_suspended = false;
+ spin_unlock_irqrestore(&host->lock, flags);
return 0;
}
struct device *dev = &ourhost->pdev->dev;
unsigned long timeout;
u16 clk = 0;
+ int ret;
host->mmc->actual_clock = 0;
sdhci_s3c_set_clock(host, clock);
- clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock);
+ ret = clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock);
+ if (ret != 0) {
+ dev_err(dev, "%s: failed to set clock rate %uHz\n",
+ mmc_hostname(host->mmc), clock);
+ return;
+ }
clk = SDHCI_CLOCK_INT_EN;
sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
#define MAX_TUNING_LOOP 40
-#define ADMA_SIZE ((128 * 2 + 1) * 4)
-
static unsigned int debug_quirks = 0;
static unsigned int debug_quirks2;
pr_debug(DRIVER_NAME ": Host ctl2: 0x%08x\n",
sdhci_readw(host, SDHCI_HOST_CONTROL2));
- if (host->flags & SDHCI_USE_ADMA)
- pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
- readl(host->ioaddr + SDHCI_ADMA_ERROR),
- readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
+ if (host->flags & SDHCI_USE_ADMA) {
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x%08x\n",
+ readl(host->ioaddr + SDHCI_ADMA_ERROR),
+ readl(host->ioaddr + SDHCI_ADMA_ADDRESS_HI),
+ readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
+ else
+ pr_debug(DRIVER_NAME ": ADMA Err: 0x%08x | ADMA Ptr: 0x%08x\n",
+ readl(host->ioaddr + SDHCI_ADMA_ERROR),
+ readl(host->ioaddr + SDHCI_ADMA_ADDRESS));
+ }
pr_debug(DRIVER_NAME ": ===========================================\n");
}
local_irq_restore(*flags);
}
-static void sdhci_set_adma_desc(u8 *desc, u32 addr, int len, unsigned cmd)
+static void sdhci_adma_write_desc(struct sdhci_host *host, void *desc,
+ dma_addr_t addr, int len, unsigned cmd)
{
- __le32 *dataddr = (__le32 __force *)(desc + 4);
- __le16 *cmdlen = (__le16 __force *)desc;
+ struct sdhci_adma2_64_desc *dma_desc = desc;
+
+ /* 32-bit and 64-bit descriptors have these members in same position */
+ dma_desc->cmd = cpu_to_le16(cmd);
+ dma_desc->len = cpu_to_le16(len);
+ dma_desc->addr_lo = cpu_to_le32((u32)addr);
- /* SDHCI specification says ADMA descriptors should be 4 byte
- * aligned, so using 16 or 32bit operations should be safe. */
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ dma_desc->addr_hi = cpu_to_le32((u64)addr >> 32);
+}
- cmdlen[0] = cpu_to_le16(cmd);
- cmdlen[1] = cpu_to_le16(len);
+static void sdhci_adma_mark_end(void *desc)
+{
+ struct sdhci_adma2_64_desc *dma_desc = desc;
- dataddr[0] = cpu_to_le32(addr);
+ /* 32-bit and 64-bit descriptors have 'cmd' in same position */
+ dma_desc->cmd |= cpu_to_le16(ADMA2_END);
}
static int sdhci_adma_table_pre(struct sdhci_host *host,
{
int direction;
- u8 *desc;
- u8 *align;
+ void *desc;
+ void *align;
dma_addr_t addr;
dma_addr_t align_addr;
int len, offset;
direction = DMA_TO_DEVICE;
host->align_addr = dma_map_single(mmc_dev(host->mmc),
- host->align_buffer, 128 * 4, direction);
+ host->align_buffer, host->align_buffer_sz, direction);
if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr))
goto fail;
- BUG_ON(host->align_addr & 0x3);
+ BUG_ON(host->align_addr & host->align_mask);
host->sg_count = dma_map_sg(mmc_dev(host->mmc),
data->sg, data->sg_len, direction);
if (host->sg_count == 0)
goto unmap_align;
- desc = host->adma_desc;
+ desc = host->adma_table;
align = host->align_buffer;
align_addr = host->align_addr;
* the (up to three) bytes that screw up the
* alignment.
*/
- offset = (4 - (addr & 0x3)) & 0x3;
+ offset = (host->align_sz - (addr & host->align_mask)) &
+ host->align_mask;
if (offset) {
if (data->flags & MMC_DATA_WRITE) {
buffer = sdhci_kmap_atomic(sg, &flags);
- WARN_ON(((long)buffer & PAGE_MASK) > (PAGE_SIZE - 3));
+ WARN_ON(((long)buffer & (PAGE_SIZE - 1)) >
+ (PAGE_SIZE - offset));
memcpy(align, buffer, offset);
sdhci_kunmap_atomic(buffer, &flags);
}
/* tran, valid */
- sdhci_set_adma_desc(desc, align_addr, offset, 0x21);
+ sdhci_adma_write_desc(host, desc, align_addr, offset,
+ ADMA2_TRAN_VALID);
BUG_ON(offset > 65536);
- align += 4;
- align_addr += 4;
+ align += host->align_sz;
+ align_addr += host->align_sz;
- desc += 8;
+ desc += host->desc_sz;
addr += offset;
len -= offset;
BUG_ON(len > 65536);
/* tran, valid */
- sdhci_set_adma_desc(desc, addr, len, 0x21);
- desc += 8;
+ sdhci_adma_write_desc(host, desc, addr, len, ADMA2_TRAN_VALID);
+ desc += host->desc_sz;
/*
* If this triggers then we have a calculation bug
* somewhere. :/
*/
- WARN_ON((desc - host->adma_desc) > ADMA_SIZE);
+ WARN_ON((desc - host->adma_table) >= host->adma_table_sz);
}
if (host->quirks & SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC) {
/*
* Mark the last descriptor as the terminating descriptor
*/
- if (desc != host->adma_desc) {
- desc -= 8;
- desc[0] |= 0x2; /* end */
+ if (desc != host->adma_table) {
+ desc -= host->desc_sz;
+ sdhci_adma_mark_end(desc);
}
} else {
/*
*/
/* nop, end, valid */
- sdhci_set_adma_desc(desc, 0, 0, 0x3);
+ sdhci_adma_write_desc(host, desc, 0, 0, ADMA2_NOP_END_VALID);
}
/*
*/
if (data->flags & MMC_DATA_WRITE) {
dma_sync_single_for_device(mmc_dev(host->mmc),
- host->align_addr, 128 * 4, direction);
+ host->align_addr, host->align_buffer_sz, direction);
}
return 0;
unmap_align:
dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
- 128 * 4, direction);
+ host->align_buffer_sz, direction);
fail:
return -EINVAL;
}
struct scatterlist *sg;
int i, size;
- u8 *align;
+ void *align;
char *buffer;
unsigned long flags;
bool has_unaligned;
direction = DMA_TO_DEVICE;
dma_unmap_single(mmc_dev(host->mmc), host->align_addr,
- 128 * 4, direction);
+ host->align_buffer_sz, direction);
/* Do a quick scan of the SG list for any unaligned mappings */
has_unaligned = false;
for_each_sg(data->sg, sg, host->sg_count, i)
- if (sg_dma_address(sg) & 3) {
+ if (sg_dma_address(sg) & host->align_mask) {
has_unaligned = true;
break;
}
align = host->align_buffer;
for_each_sg(data->sg, sg, host->sg_count, i) {
- if (sg_dma_address(sg) & 0x3) {
- size = 4 - (sg_dma_address(sg) & 0x3);
+ if (sg_dma_address(sg) & host->align_mask) {
+ size = host->align_sz -
+ (sg_dma_address(sg) & host->align_mask);
buffer = sdhci_kmap_atomic(sg, &flags);
- WARN_ON(((long)buffer & PAGE_MASK) > (PAGE_SIZE - 3));
+ WARN_ON(((long)buffer & (PAGE_SIZE - 1)) >
+ (PAGE_SIZE - size));
memcpy(buffer, align, size);
sdhci_kunmap_atomic(buffer, &flags);
- align += 4;
+ align += host->align_sz;
}
}
}
} else {
sdhci_writel(host, host->adma_addr,
SDHCI_ADMA_ADDRESS);
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ sdhci_writel(host,
+ (u64)host->adma_addr >> 32,
+ SDHCI_ADMA_ADDRESS_HI);
}
} else {
int sg_cnt;
ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
ctrl &= ~SDHCI_CTRL_DMA_MASK;
if ((host->flags & SDHCI_REQ_USE_DMA) &&
- (host->flags & SDHCI_USE_ADMA))
- ctrl |= SDHCI_CTRL_ADMA32;
- else
+ (host->flags & SDHCI_USE_ADMA)) {
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ ctrl |= SDHCI_CTRL_ADMA64;
+ else
+ ctrl |= SDHCI_CTRL_ADMA32;
+ } else {
ctrl |= SDHCI_CTRL_SDMA;
+ }
sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
}
struct mmc_data *data = cmd->data;
if (data == NULL) {
+ if (host->quirks2 &
+ SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD) {
+ sdhci_writew(host, 0x0, SDHCI_TRANSFER_MODE);
+ } else {
/* clear Auto CMD settings for no data CMDs */
- mode = sdhci_readw(host, SDHCI_TRANSFER_MODE);
- sdhci_writew(host, mode & ~(SDHCI_TRNS_AUTO_CMD12 |
+ mode = sdhci_readw(host, SDHCI_TRANSFER_MODE);
+ sdhci_writew(host, mode & ~(SDHCI_TRNS_AUTO_CMD12 |
SDHCI_TRNS_AUTO_CMD23), SDHCI_TRANSFER_MODE);
+ }
return;
}
case MMC_TIMING_UHS_DDR50:
preset = sdhci_readw(host, SDHCI_PRESET_FOR_DDR50);
break;
+ case MMC_TIMING_MMC_HS400:
+ preset = sdhci_readw(host, SDHCI_PRESET_FOR_HS400);
+ break;
default:
pr_warn("%s: Invalid UHS-I mode selected\n",
mmc_hostname(host->mmc));
else if ((timing == MMC_TIMING_UHS_DDR50) ||
(timing == MMC_TIMING_MMC_DDR52))
ctrl_2 |= SDHCI_CTRL_UHS_DDR50;
+ else if (timing == MMC_TIMING_MMC_HS400)
+ ctrl_2 |= SDHCI_CTRL_HS400; /* Non-standard */
sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2);
}
EXPORT_SYMBOL_GPL(sdhci_set_uhs_signaling);
u16 clk, ctrl_2;
/* In case of UHS-I modes, set High Speed Enable */
- if ((ios->timing == MMC_TIMING_MMC_HS200) ||
+ if ((ios->timing == MMC_TIMING_MMC_HS400) ||
+ (ios->timing == MMC_TIMING_MMC_HS200) ||
(ios->timing == MMC_TIMING_MMC_DDR52) ||
(ios->timing == MMC_TIMING_UHS_SDR50) ||
(ios->timing == MMC_TIMING_UHS_SDR104) ||
* tuning function has to be executed.
*/
switch (host->timing) {
+ case MMC_TIMING_MMC_HS400:
case MMC_TIMING_MMC_HS200:
case MMC_TIMING_UHS_SDR104:
break;
*/
if (!(host->flags & SDHCI_DEVICE_DEAD) &&
((mrq->cmd && mrq->cmd->error) ||
- (mrq->data && (mrq->data->error ||
- (mrq->data->stop && mrq->data->stop->error))) ||
- (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) {
+ (mrq->sbc && mrq->sbc->error) ||
+ (mrq->data && ((mrq->data->error && !mrq->data->stop) ||
+ (mrq->data->stop && mrq->data->stop->error))) ||
+ (host->quirks & SDHCI_QUIRK_RESET_AFTER_REQUEST))) {
/* Some controllers need this kick or reset won't work here */
if (host->quirks & SDHCI_QUIRK_CLOCK_BEFORE_RESET)
}
#ifdef CONFIG_MMC_DEBUG
-static void sdhci_show_adma_error(struct sdhci_host *host)
+static void sdhci_adma_show_error(struct sdhci_host *host)
{
const char *name = mmc_hostname(host->mmc);
- u8 *desc = host->adma_desc;
- __le32 *dma;
- __le16 *len;
- u8 attr;
+ void *desc = host->adma_table;
sdhci_dumpregs(host);
while (true) {
- dma = (__le32 *)(desc + 4);
- len = (__le16 *)(desc + 2);
- attr = *desc;
-
- DBG("%s: %p: DMA 0x%08x, LEN 0x%04x, Attr=0x%02x\n",
- name, desc, le32_to_cpu(*dma), le16_to_cpu(*len), attr);
+ struct sdhci_adma2_64_desc *dma_desc = desc;
+
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ DBG("%s: %p: DMA 0x%08x%08x, LEN 0x%04x, Attr=0x%02x\n",
+ name, desc, le32_to_cpu(dma_desc->addr_hi),
+ le32_to_cpu(dma_desc->addr_lo),
+ le16_to_cpu(dma_desc->len),
+ le16_to_cpu(dma_desc->cmd));
+ else
+ DBG("%s: %p: DMA 0x%08x, LEN 0x%04x, Attr=0x%02x\n",
+ name, desc, le32_to_cpu(dma_desc->addr_lo),
+ le16_to_cpu(dma_desc->len),
+ le16_to_cpu(dma_desc->cmd));
- desc += 8;
+ desc += host->desc_sz;
- if (attr & 2)
+ if (dma_desc->cmd & cpu_to_le16(ADMA2_END))
break;
}
}
#else
-static void sdhci_show_adma_error(struct sdhci_host *host) { }
+static void sdhci_adma_show_error(struct sdhci_host *host) { }
#endif
static void sdhci_data_irq(struct sdhci_host *host, u32 intmask)
host->data->error = -EILSEQ;
else if (intmask & SDHCI_INT_ADMA_ERROR) {
pr_err("%s: ADMA error\n", mmc_hostname(host->mmc));
- sdhci_show_adma_error(host);
+ sdhci_adma_show_error(host);
host->data->error = -EIO;
if (host->ops->adma_workaround)
host->ops->adma_workaround(host, intmask);
host->flags &= ~SDHCI_USE_ADMA;
}
+ /*
+ * It is assumed that a 64-bit capable device has set a 64-bit DMA mask
+ * and *must* do 64-bit DMA. A driver has the opportunity to change
+ * that during the first call to ->enable_dma(). Similarly
+ * SDHCI_QUIRK2_BROKEN_64_BIT_DMA must be left to the drivers to
+ * implement.
+ */
+ if (sdhci_readl(host, SDHCI_CAPABILITIES) & SDHCI_CAN_64BIT)
+ host->flags |= SDHCI_USE_64_BIT_DMA;
+
if (host->flags & (SDHCI_USE_SDMA | SDHCI_USE_ADMA)) {
if (host->ops->enable_dma) {
if (host->ops->enable_dma(host)) {
}
}
+ /* SDMA does not support 64-bit DMA */
+ if (host->flags & SDHCI_USE_64_BIT_DMA)
+ host->flags &= ~SDHCI_USE_SDMA;
+
if (host->flags & SDHCI_USE_ADMA) {
/*
- * We need to allocate descriptors for all sg entries
- * (128) and potentially one alignment transfer for
- * each of those entries.
+ * The DMA descriptor table size is calculated as the maximum
+ * number of segments times 2, to allow for an alignment
+ * descriptor for each segment, plus 1 for a nop end descriptor,
+ * all multipled by the descriptor size.
*/
- host->adma_desc = dma_alloc_coherent(mmc_dev(mmc),
- ADMA_SIZE, &host->adma_addr,
- GFP_KERNEL);
- host->align_buffer = kmalloc(128 * 4, GFP_KERNEL);
- if (!host->adma_desc || !host->align_buffer) {
- dma_free_coherent(mmc_dev(mmc), ADMA_SIZE,
- host->adma_desc, host->adma_addr);
+ if (host->flags & SDHCI_USE_64_BIT_DMA) {
+ host->adma_table_sz = (SDHCI_MAX_SEGS * 2 + 1) *
+ SDHCI_ADMA2_64_DESC_SZ;
+ host->align_buffer_sz = SDHCI_MAX_SEGS *
+ SDHCI_ADMA2_64_ALIGN;
+ host->desc_sz = SDHCI_ADMA2_64_DESC_SZ;
+ host->align_sz = SDHCI_ADMA2_64_ALIGN;
+ host->align_mask = SDHCI_ADMA2_64_ALIGN - 1;
+ } else {
+ host->adma_table_sz = (SDHCI_MAX_SEGS * 2 + 1) *
+ SDHCI_ADMA2_32_DESC_SZ;
+ host->align_buffer_sz = SDHCI_MAX_SEGS *
+ SDHCI_ADMA2_32_ALIGN;
+ host->desc_sz = SDHCI_ADMA2_32_DESC_SZ;
+ host->align_sz = SDHCI_ADMA2_32_ALIGN;
+ host->align_mask = SDHCI_ADMA2_32_ALIGN - 1;
+ }
+ host->adma_table = dma_alloc_coherent(mmc_dev(mmc),
+ host->adma_table_sz,
+ &host->adma_addr,
+ GFP_KERNEL);
+ host->align_buffer = kmalloc(host->align_buffer_sz, GFP_KERNEL);
+ if (!host->adma_table || !host->align_buffer) {
+ dma_free_coherent(mmc_dev(mmc), host->adma_table_sz,
+ host->adma_table, host->adma_addr);
kfree(host->align_buffer);
pr_warn("%s: Unable to allocate ADMA buffers - falling back to standard DMA\n",
mmc_hostname(mmc));
host->flags &= ~SDHCI_USE_ADMA;
- host->adma_desc = NULL;
+ host->adma_table = NULL;
host->align_buffer = NULL;
- } else if (host->adma_addr & 3) {
+ } else if (host->adma_addr & host->align_mask) {
pr_warn("%s: unable to allocate aligned ADMA descriptor\n",
mmc_hostname(mmc));
host->flags &= ~SDHCI_USE_ADMA;
- dma_free_coherent(mmc_dev(mmc), ADMA_SIZE,
- host->adma_desc, host->adma_addr);
+ dma_free_coherent(mmc_dev(mmc), host->adma_table_sz,
+ host->adma_table, host->adma_addr);
kfree(host->align_buffer);
- host->adma_desc = NULL;
+ host->adma_table = NULL;
host->align_buffer = NULL;
}
}
if (ret) {
pr_warn("%s: Failed to enable vqmmc regulator: %d\n",
mmc_hostname(mmc), ret);
- mmc->supply.vqmmc = NULL;
+ mmc->supply.vqmmc = ERR_PTR(-EINVAL);
}
}
/* SD3.0: SDR104 is supported so (for eMMC) the caps2
* field can be promoted to support HS200.
*/
- if (!(host->quirks2 & SDHCI_QUIRK2_BROKEN_HS200)) {
+ if (!(host->quirks2 & SDHCI_QUIRK2_BROKEN_HS200))
mmc->caps2 |= MMC_CAP2_HS200;
- if (IS_ERR(mmc->supply.vqmmc) ||
- !regulator_is_supported_voltage
- (mmc->supply.vqmmc, 1100000, 1300000))
- mmc->caps2 &= ~MMC_CAP2_HS200_1_2V_SDR;
- }
} else if (caps[1] & SDHCI_SUPPORT_SDR50)
mmc->caps |= MMC_CAP_UHS_SDR50;
+ if (host->quirks2 & SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 &&
+ (caps[1] & SDHCI_SUPPORT_HS400))
+ mmc->caps2 |= MMC_CAP2_HS400;
+
+ if ((mmc->caps2 & MMC_CAP2_HSX00_1_2V) &&
+ (IS_ERR(mmc->supply.vqmmc) ||
+ !regulator_is_supported_voltage(mmc->supply.vqmmc, 1100000,
+ 1300000)))
+ mmc->caps2 &= ~MMC_CAP2_HSX00_1_2V;
+
if ((caps[1] & SDHCI_SUPPORT_DDR50) &&
!(host->quirks2 & SDHCI_QUIRK2_BROKEN_DDR50))
mmc->caps |= MMC_CAP_UHS_DDR50;
* can do scatter/gather or not.
*/
if (host->flags & SDHCI_USE_ADMA)
- mmc->max_segs = 128;
+ mmc->max_segs = SDHCI_MAX_SEGS;
else if (host->flags & SDHCI_USE_SDMA)
mmc->max_segs = 1;
else /* PIO */
- mmc->max_segs = 128;
+ mmc->max_segs = SDHCI_MAX_SEGS;
/*
* Maximum number of sectors in one transfer. Limited by DMA boundary
pr_info("%s: SDHCI controller on %s [%s] using %s\n",
mmc_hostname(mmc), host->hw_name, dev_name(mmc_dev(mmc)),
- (host->flags & SDHCI_USE_ADMA) ? "ADMA" :
+ (host->flags & SDHCI_USE_ADMA) ?
+ (host->flags & SDHCI_USE_64_BIT_DMA) ? "ADMA 64-bit" : "ADMA" :
(host->flags & SDHCI_USE_SDMA) ? "DMA" : "PIO");
sdhci_enable_card_detection(host);
tasklet_kill(&host->finish_tasklet);
- if (!IS_ERR(mmc->supply.vmmc))
- regulator_disable(mmc->supply.vmmc);
-
if (!IS_ERR(mmc->supply.vqmmc))
regulator_disable(mmc->supply.vqmmc);
- if (host->adma_desc)
- dma_free_coherent(mmc_dev(mmc), ADMA_SIZE,
- host->adma_desc, host->adma_addr);
+ if (host->adma_table)
+ dma_free_coherent(mmc_dev(mmc), host->adma_table_sz,
+ host->adma_table, host->adma_addr);
kfree(host->align_buffer);
- host->adma_desc = NULL;
+ host->adma_table = NULL;
host->align_buffer = NULL;
}
#define SDHCI_CTRL_UHS_SDR50 0x0002
#define SDHCI_CTRL_UHS_SDR104 0x0003
#define SDHCI_CTRL_UHS_DDR50 0x0004
-#define SDHCI_CTRL_HS_SDR200 0x0005 /* reserved value in SDIO spec */
+#define SDHCI_CTRL_HS400 0x0005 /* Non-standard */
#define SDHCI_CTRL_VDD_180 0x0008
#define SDHCI_CTRL_DRV_TYPE_MASK 0x0030
#define SDHCI_CTRL_DRV_TYPE_B 0x0000
#define SDHCI_RETUNING_MODE_SHIFT 14
#define SDHCI_CLOCK_MUL_MASK 0x00FF0000
#define SDHCI_CLOCK_MUL_SHIFT 16
+#define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */
#define SDHCI_CAPABILITIES_1 0x44
/* 55-57 reserved */
#define SDHCI_ADMA_ADDRESS 0x58
+#define SDHCI_ADMA_ADDRESS_HI 0x5C
/* 60-FB reserved */
#define SDHCI_PRESET_FOR_SDR50 0x6A
#define SDHCI_PRESET_FOR_SDR104 0x6C
#define SDHCI_PRESET_FOR_DDR50 0x6E
+#define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */
#define SDHCI_PRESET_DRV_MASK 0xC000
#define SDHCI_PRESET_DRV_SHIFT 14
#define SDHCI_PRESET_CLKGEN_SEL_MASK 0x400
#define SDHCI_DEFAULT_BOUNDARY_SIZE (512 * 1024)
#define SDHCI_DEFAULT_BOUNDARY_ARG (ilog2(SDHCI_DEFAULT_BOUNDARY_SIZE) - 12)
+/* ADMA2 32-bit DMA descriptor size */
+#define SDHCI_ADMA2_32_DESC_SZ 8
+
+/* ADMA2 32-bit DMA alignment */
+#define SDHCI_ADMA2_32_ALIGN 4
+
+/* ADMA2 32-bit descriptor */
+struct sdhci_adma2_32_desc {
+ __le16 cmd;
+ __le16 len;
+ __le32 addr;
+} __packed __aligned(SDHCI_ADMA2_32_ALIGN);
+
+/* ADMA2 64-bit DMA descriptor size */
+#define SDHCI_ADMA2_64_DESC_SZ 12
+
+/* ADMA2 64-bit DMA alignment */
+#define SDHCI_ADMA2_64_ALIGN 8
+
+/*
+ * ADMA2 64-bit descriptor. Note 12-byte descriptor can't always be 8-byte
+ * aligned.
+ */
+struct sdhci_adma2_64_desc {
+ __le16 cmd;
+ __le16 len;
+ __le32 addr_lo;
+ __le32 addr_hi;
+} __packed __aligned(4);
+
+#define ADMA2_TRAN_VALID 0x21
+#define ADMA2_NOP_END_VALID 0x3
+#define ADMA2_END 0x2
+
+/*
+ * Maximum segments assuming a 512KiB maximum requisition size and a minimum
+ * 4KiB page size.
+ */
+#define SDHCI_MAX_SEGS 128
+
struct sdhci_ops {
#ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS
u32 (*read_l)(struct sdhci_host *host, int reg);
#include <linux/err.h>
#include <linux/clk.h>
-#include <linux/clk-private.h>
#include <linux/clk/sunxi.h>
#include <linux/gpio.h>
--- /dev/null
+/*
+ * Toshiba PCI Secure Digital Host Controller Interface driver
+ *
+ * Copyright (C) 2014 Ondrej Zary
+ * Copyright (C) 2007 Richard Betts, All Rights Reserved.
+ *
+ * Based on asic3_mmc.c, copyright (c) 2005 SDG Systems, LLC and,
+ * sdhci.c, copyright (C) 2005-2006 Pierre Ossman
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/scatterlist.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/pm.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+
+#include "toshsd.h"
+
+#define DRIVER_NAME "toshsd"
+
+static const struct pci_device_id pci_ids[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA, 0x0805) },
+ { /* end: all zeroes */ },
+};
+
+MODULE_DEVICE_TABLE(pci, pci_ids);
+
+static void toshsd_init(struct toshsd_host *host)
+{
+ /* enable clock */
+ pci_write_config_byte(host->pdev, SD_PCICFG_CLKSTOP,
+ SD_PCICFG_CLKSTOP_ENABLE_ALL);
+ pci_write_config_byte(host->pdev, SD_PCICFG_CARDDETECT, 2);
+
+ /* reset */
+ iowrite16(0, host->ioaddr + SD_SOFTWARERESET); /* assert */
+ mdelay(2);
+ iowrite16(1, host->ioaddr + SD_SOFTWARERESET); /* deassert */
+ mdelay(2);
+
+ /* Clear card registers */
+ iowrite16(0, host->ioaddr + SD_CARDCLOCKCTRL);
+ iowrite32(0, host->ioaddr + SD_CARDSTATUS);
+ iowrite32(0, host->ioaddr + SD_ERRORSTATUS0);
+ iowrite16(0, host->ioaddr + SD_STOPINTERNAL);
+
+ /* SDIO clock? */
+ iowrite16(0x100, host->ioaddr + SDIO_BASE + SDIO_CLOCKNWAITCTRL);
+
+ /* enable LED */
+ pci_write_config_byte(host->pdev, SD_PCICFG_SDLED_ENABLE1,
+ SD_PCICFG_LED_ENABLE1_START);
+ pci_write_config_byte(host->pdev, SD_PCICFG_SDLED_ENABLE2,
+ SD_PCICFG_LED_ENABLE2_START);
+
+ /* set interrupt masks */
+ iowrite32(~(u32)(SD_CARD_RESP_END | SD_CARD_RW_END
+ | SD_CARD_CARD_REMOVED_0 | SD_CARD_CARD_INSERTED_0
+ | SD_BUF_READ_ENABLE | SD_BUF_WRITE_ENABLE
+ | SD_BUF_CMD_TIMEOUT),
+ host->ioaddr + SD_INTMASKCARD);
+
+ iowrite16(0x1000, host->ioaddr + SD_TRANSACTIONCTRL);
+}
+
+/* Set MMC clock / power.
+ * Note: This controller uses a simple divider scheme therefore it cannot run
+ * SD/MMC cards at full speed (24/20MHz). HCLK (=33MHz PCI clock?) is too high
+ * and the next slowest is 16MHz (div=2).
+ */
+static void __toshsd_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct toshsd_host *host = mmc_priv(mmc);
+
+ if (ios->clock) {
+ u16 clk;
+ int div = 1;
+
+ while (ios->clock < HCLK / div)
+ div *= 2;
+
+ clk = div >> 2;
+
+ if (div == 1) { /* disable the divider */
+ pci_write_config_byte(host->pdev, SD_PCICFG_CLKMODE,
+ SD_PCICFG_CLKMODE_DIV_DISABLE);
+ clk |= SD_CARDCLK_DIV_DISABLE;
+ } else
+ pci_write_config_byte(host->pdev, SD_PCICFG_CLKMODE, 0);
+
+ clk |= SD_CARDCLK_ENABLE_CLOCK;
+ iowrite16(clk, host->ioaddr + SD_CARDCLOCKCTRL);
+
+ mdelay(10);
+ } else
+ iowrite16(0, host->ioaddr + SD_CARDCLOCKCTRL);
+
+ switch (ios->power_mode) {
+ case MMC_POWER_OFF:
+ pci_write_config_byte(host->pdev, SD_PCICFG_POWER1,
+ SD_PCICFG_PWR1_OFF);
+ mdelay(1);
+ break;
+ case MMC_POWER_UP:
+ break;
+ case MMC_POWER_ON:
+ pci_write_config_byte(host->pdev, SD_PCICFG_POWER1,
+ SD_PCICFG_PWR1_33V);
+ pci_write_config_byte(host->pdev, SD_PCICFG_POWER2,
+ SD_PCICFG_PWR2_AUTO);
+ mdelay(20);
+ break;
+ }
+
+ switch (ios->bus_width) {
+ case MMC_BUS_WIDTH_1:
+ iowrite16(SD_CARDOPT_REQUIRED | SD_CARDOPT_DATA_RESP_TIMEOUT(14)
+ | SD_CARDOPT_C2_MODULE_ABSENT
+ | SD_CARDOPT_DATA_XFR_WIDTH_1,
+ host->ioaddr + SD_CARDOPTIONSETUP);
+ break;
+ case MMC_BUS_WIDTH_4:
+ iowrite16(SD_CARDOPT_REQUIRED | SD_CARDOPT_DATA_RESP_TIMEOUT(14)
+ | SD_CARDOPT_C2_MODULE_ABSENT
+ | SD_CARDOPT_DATA_XFR_WIDTH_4,
+ host->ioaddr + SD_CARDOPTIONSETUP);
+ break;
+ }
+}
+
+static void toshsd_set_led(struct toshsd_host *host, unsigned char state)
+{
+ iowrite16(state, host->ioaddr + SDIO_BASE + SDIO_LEDCTRL);
+}
+
+static void toshsd_finish_request(struct toshsd_host *host)
+{
+ struct mmc_request *mrq = host->mrq;
+
+ /* Write something to end the command */
+ host->mrq = NULL;
+ host->cmd = NULL;
+ host->data = NULL;
+
+ toshsd_set_led(host, 0);
+ mmc_request_done(host->mmc, mrq);
+}
+
+static irqreturn_t toshsd_thread_irq(int irq, void *dev_id)
+{
+ struct toshsd_host *host = dev_id;
+ struct mmc_data *data = host->data;
+ struct sg_mapping_iter *sg_miter = &host->sg_miter;
+ unsigned short *buf;
+ int count;
+ unsigned long flags;
+
+ if (!data) {
+ dev_warn(&host->pdev->dev, "Spurious Data IRQ\n");
+ if (host->cmd) {
+ host->cmd->error = -EIO;
+ toshsd_finish_request(host);
+ }
+ return IRQ_NONE;
+ }
+ spin_lock_irqsave(&host->lock, flags);
+
+ if (!sg_miter_next(sg_miter))
+ return IRQ_HANDLED;
+ buf = sg_miter->addr;
+
+ /* Ensure we dont read more than one block. The chip will interrupt us
+ * When the next block is available.
+ */
+ count = sg_miter->length;
+ if (count > data->blksz)
+ count = data->blksz;
+
+ dev_dbg(&host->pdev->dev, "count: %08x, flags %08x\n", count,
+ data->flags);
+
+ /* Transfer the data */
+ if (data->flags & MMC_DATA_READ)
+ ioread32_rep(host->ioaddr + SD_DATAPORT, buf, count >> 2);
+ else
+ iowrite32_rep(host->ioaddr + SD_DATAPORT, buf, count >> 2);
+
+ sg_miter->consumed = count;
+ sg_miter_stop(sg_miter);
+
+ spin_unlock_irqrestore(&host->lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static void toshsd_cmd_irq(struct toshsd_host *host)
+{
+ struct mmc_command *cmd = host->cmd;
+ u8 *buf;
+ u16 data;
+
+ if (!host->cmd) {
+ dev_warn(&host->pdev->dev, "Spurious CMD irq\n");
+ return;
+ }
+ buf = (u8 *)cmd->resp;
+ host->cmd = NULL;
+
+ if (cmd->flags & MMC_RSP_PRESENT && cmd->flags & MMC_RSP_136) {
+ /* R2 */
+ buf[12] = 0xff;
+ data = ioread16(host->ioaddr + SD_RESPONSE0);
+ buf[13] = data & 0xff;
+ buf[14] = data >> 8;
+ data = ioread16(host->ioaddr + SD_RESPONSE1);
+ buf[15] = data & 0xff;
+ buf[8] = data >> 8;
+ data = ioread16(host->ioaddr + SD_RESPONSE2);
+ buf[9] = data & 0xff;
+ buf[10] = data >> 8;
+ data = ioread16(host->ioaddr + SD_RESPONSE3);
+ buf[11] = data & 0xff;
+ buf[4] = data >> 8;
+ data = ioread16(host->ioaddr + SD_RESPONSE4);
+ buf[5] = data & 0xff;
+ buf[6] = data >> 8;
+ data = ioread16(host->ioaddr + SD_RESPONSE5);
+ buf[7] = data & 0xff;
+ buf[0] = data >> 8;
+ data = ioread16(host->ioaddr + SD_RESPONSE6);
+ buf[1] = data & 0xff;
+ buf[2] = data >> 8;
+ data = ioread16(host->ioaddr + SD_RESPONSE7);
+ buf[3] = data & 0xff;
+ } else if (cmd->flags & MMC_RSP_PRESENT) {
+ /* R1, R1B, R3, R6, R7 */
+ data = ioread16(host->ioaddr + SD_RESPONSE0);
+ buf[0] = data & 0xff;
+ buf[1] = data >> 8;
+ data = ioread16(host->ioaddr + SD_RESPONSE1);
+ buf[2] = data & 0xff;
+ buf[3] = data >> 8;
+ }
+
+ dev_dbg(&host->pdev->dev, "Command IRQ complete %d %d %x\n",
+ cmd->opcode, cmd->error, cmd->flags);
+
+ /* If there is data to handle we will
+ * finish the request in the mmc_data_end_irq handler.*/
+ if (host->data)
+ return;
+
+ toshsd_finish_request(host);
+}
+
+static void toshsd_data_end_irq(struct toshsd_host *host)
+{
+ struct mmc_data *data = host->data;
+
+ host->data = NULL;
+
+ if (!data) {
+ dev_warn(&host->pdev->dev, "Spurious data end IRQ\n");
+ return;
+ }
+
+ if (data->error == 0)
+ data->bytes_xfered = data->blocks * data->blksz;
+ else
+ data->bytes_xfered = 0;
+
+ dev_dbg(&host->pdev->dev, "Completed data request xfr=%d\n",
+ data->bytes_xfered);
+
+ iowrite16(0, host->ioaddr + SD_STOPINTERNAL);
+
+ toshsd_finish_request(host);
+}
+
+static irqreturn_t toshsd_irq(int irq, void *dev_id)
+{
+ struct toshsd_host *host = dev_id;
+ u32 int_reg, int_mask, int_status, detail;
+ int error = 0, ret = IRQ_HANDLED;
+
+ spin_lock(&host->lock);
+ int_status = ioread32(host->ioaddr + SD_CARDSTATUS);
+ int_mask = ioread32(host->ioaddr + SD_INTMASKCARD);
+ int_reg = int_status & ~int_mask & ~IRQ_DONT_CARE_BITS;
+
+ dev_dbg(&host->pdev->dev, "IRQ status:%x mask:%x\n",
+ int_status, int_mask);
+
+ /* nothing to do: it's not our IRQ */
+ if (!int_reg) {
+ ret = IRQ_NONE;
+ goto irq_end;
+ }
+
+ if (int_reg & SD_BUF_CMD_TIMEOUT) {
+ error = -ETIMEDOUT;
+ dev_dbg(&host->pdev->dev, "Timeout\n");
+ } else if (int_reg & SD_BUF_CRC_ERR) {
+ error = -EILSEQ;
+ dev_err(&host->pdev->dev, "BadCRC\n");
+ } else if (int_reg & (SD_BUF_ILLEGAL_ACCESS
+ | SD_BUF_CMD_INDEX_ERR
+ | SD_BUF_STOP_BIT_END_ERR
+ | SD_BUF_OVERFLOW
+ | SD_BUF_UNDERFLOW
+ | SD_BUF_DATA_TIMEOUT)) {
+ dev_err(&host->pdev->dev, "Buffer status error: { %s%s%s%s%s%s}\n",
+ int_reg & SD_BUF_ILLEGAL_ACCESS ? "ILLEGAL_ACC " : "",
+ int_reg & SD_BUF_CMD_INDEX_ERR ? "CMD_INDEX " : "",
+ int_reg & SD_BUF_STOP_BIT_END_ERR ? "STOPBIT_END " : "",
+ int_reg & SD_BUF_OVERFLOW ? "OVERFLOW " : "",
+ int_reg & SD_BUF_UNDERFLOW ? "UNDERFLOW " : "",
+ int_reg & SD_BUF_DATA_TIMEOUT ? "DATA_TIMEOUT " : "");
+
+ detail = ioread32(host->ioaddr + SD_ERRORSTATUS0);
+ dev_err(&host->pdev->dev, "detail error status { %s%s%s%s%s%s%s%s%s%s%s%s%s}\n",
+ detail & SD_ERR0_RESP_CMD_ERR ? "RESP_CMD " : "",
+ detail & SD_ERR0_RESP_NON_CMD12_END_BIT_ERR ? "RESP_END_BIT " : "",
+ detail & SD_ERR0_RESP_CMD12_END_BIT_ERR ? "RESP_END_BIT " : "",
+ detail & SD_ERR0_READ_DATA_END_BIT_ERR ? "READ_DATA_END_BIT " : "",
+ detail & SD_ERR0_WRITE_CRC_STATUS_END_BIT_ERR ? "WRITE_CMD_END_BIT " : "",
+ detail & SD_ERR0_RESP_NON_CMD12_CRC_ERR ? "RESP_CRC " : "",
+ detail & SD_ERR0_RESP_CMD12_CRC_ERR ? "RESP_CRC " : "",
+ detail & SD_ERR0_READ_DATA_CRC_ERR ? "READ_DATA_CRC " : "",
+ detail & SD_ERR0_WRITE_CMD_CRC_ERR ? "WRITE_CMD_CRC " : "",
+ detail & SD_ERR1_NO_CMD_RESP ? "NO_CMD_RESP " : "",
+ detail & SD_ERR1_TIMEOUT_READ_DATA ? "READ_DATA_TIMEOUT " : "",
+ detail & SD_ERR1_TIMEOUT_CRS_STATUS ? "CRS_STATUS_TIMEOUT " : "",
+ detail & SD_ERR1_TIMEOUT_CRC_BUSY ? "CRC_BUSY_TIMEOUT " : "");
+ error = -EIO;
+ }
+
+ if (error) {
+ if (host->cmd)
+ host->cmd->error = error;
+
+ if (error == -ETIMEDOUT) {
+ iowrite32(int_status &
+ ~(SD_BUF_CMD_TIMEOUT | SD_CARD_RESP_END),
+ host->ioaddr + SD_CARDSTATUS);
+ } else {
+ toshsd_init(host);
+ __toshsd_set_ios(host->mmc, &host->mmc->ios);
+ goto irq_end;
+ }
+ }
+
+ /* Card insert/remove. The mmc controlling code is stateless. */
+ if (int_reg & (SD_CARD_CARD_INSERTED_0 | SD_CARD_CARD_REMOVED_0)) {
+ iowrite32(int_status &
+ ~(SD_CARD_CARD_REMOVED_0 | SD_CARD_CARD_INSERTED_0),
+ host->ioaddr + SD_CARDSTATUS);
+
+ if (int_reg & SD_CARD_CARD_INSERTED_0)
+ toshsd_init(host);
+
+ mmc_detect_change(host->mmc, 1);
+ }
+
+ /* Data transfer */
+ if (int_reg & (SD_BUF_READ_ENABLE | SD_BUF_WRITE_ENABLE)) {
+ iowrite32(int_status &
+ ~(SD_BUF_WRITE_ENABLE | SD_BUF_READ_ENABLE),
+ host->ioaddr + SD_CARDSTATUS);
+
+ ret = IRQ_WAKE_THREAD;
+ goto irq_end;
+ }
+
+ /* Command completion */
+ if (int_reg & SD_CARD_RESP_END) {
+ iowrite32(int_status & ~(SD_CARD_RESP_END),
+ host->ioaddr + SD_CARDSTATUS);
+ toshsd_cmd_irq(host);
+ }
+
+ /* Data transfer completion */
+ if (int_reg & SD_CARD_RW_END) {
+ iowrite32(int_status & ~(SD_CARD_RW_END),
+ host->ioaddr + SD_CARDSTATUS);
+ toshsd_data_end_irq(host);
+ }
+irq_end:
+ spin_unlock(&host->lock);
+ return ret;
+}
+
+static void toshsd_start_cmd(struct toshsd_host *host, struct mmc_command *cmd)
+{
+ struct mmc_data *data = host->data;
+ int c = cmd->opcode;
+
+ dev_dbg(&host->pdev->dev, "Command opcode: %d\n", cmd->opcode);
+
+ if (cmd->opcode == MMC_STOP_TRANSMISSION) {
+ iowrite16(SD_STOPINT_ISSUE_CMD12,
+ host->ioaddr + SD_STOPINTERNAL);
+
+ cmd->resp[0] = cmd->opcode;
+ cmd->resp[1] = 0;
+ cmd->resp[2] = 0;
+ cmd->resp[3] = 0;
+
+ toshsd_finish_request(host);
+ return;
+ }
+
+ switch (mmc_resp_type(cmd)) {
+ case MMC_RSP_NONE:
+ c |= SD_CMD_RESP_TYPE_NONE;
+ break;
+
+ case MMC_RSP_R1:
+ c |= SD_CMD_RESP_TYPE_EXT_R1;
+ break;
+ case MMC_RSP_R1B:
+ c |= SD_CMD_RESP_TYPE_EXT_R1B;
+ break;
+ case MMC_RSP_R2:
+ c |= SD_CMD_RESP_TYPE_EXT_R2;
+ break;
+ case MMC_RSP_R3:
+ c |= SD_CMD_RESP_TYPE_EXT_R3;
+ break;
+
+ default:
+ dev_err(&host->pdev->dev, "Unknown response type %d\n",
+ mmc_resp_type(cmd));
+ break;
+ }
+
+ host->cmd = cmd;
+
+ if (cmd->opcode == MMC_APP_CMD)
+ c |= SD_CMD_TYPE_ACMD;
+
+ if (cmd->opcode == MMC_GO_IDLE_STATE)
+ c |= (3 << 8); /* removed from ipaq-asic3.h for some reason */
+
+ if (data) {
+ c |= SD_CMD_DATA_PRESENT;
+
+ if (data->blocks > 1) {
+ iowrite16(SD_STOPINT_AUTO_ISSUE_CMD12,
+ host->ioaddr + SD_STOPINTERNAL);
+ c |= SD_CMD_MULTI_BLOCK;
+ }
+
+ if (data->flags & MMC_DATA_READ)
+ c |= SD_CMD_TRANSFER_READ;
+
+ /* MMC_DATA_WRITE does not require a bit to be set */
+ }
+
+ /* Send the command */
+ iowrite32(cmd->arg, host->ioaddr + SD_ARG0);
+ iowrite16(c, host->ioaddr + SD_CMD);
+}
+
+static void toshsd_start_data(struct toshsd_host *host, struct mmc_data *data)
+{
+ unsigned int flags = SG_MITER_ATOMIC;
+
+ dev_dbg(&host->pdev->dev, "setup data transfer: blocksize %08x nr_blocks %d, offset: %08x\n",
+ data->blksz, data->blocks, data->sg->offset);
+
+ host->data = data;
+
+ if (data->flags & MMC_DATA_READ)
+ flags |= SG_MITER_TO_SG;
+ else
+ flags |= SG_MITER_FROM_SG;
+
+ sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
+
+ /* Set transfer length and blocksize */
+ iowrite16(data->blocks, host->ioaddr + SD_BLOCKCOUNT);
+ iowrite16(data->blksz, host->ioaddr + SD_CARDXFERDATALEN);
+}
+
+/* Process requests from the MMC layer */
+static void toshsd_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct toshsd_host *host = mmc_priv(mmc);
+ unsigned long flags;
+
+ /* abort if card not present */
+ if (!(ioread16(host->ioaddr + SD_CARDSTATUS) & SD_CARD_PRESENT_0)) {
+ mrq->cmd->error = -ENOMEDIUM;
+ mmc_request_done(mmc, mrq);
+ return;
+ }
+
+ spin_lock_irqsave(&host->lock, flags);
+
+ WARN_ON(host->mrq != NULL);
+
+ host->mrq = mrq;
+
+ if (mrq->data)
+ toshsd_start_data(host, mrq->data);
+
+ toshsd_set_led(host, 1);
+
+ toshsd_start_cmd(host, mrq->cmd);
+
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static void toshsd_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct toshsd_host *host = mmc_priv(mmc);
+ unsigned long flags;
+
+ spin_lock_irqsave(&host->lock, flags);
+ __toshsd_set_ios(mmc, ios);
+ spin_unlock_irqrestore(&host->lock, flags);
+}
+
+static int toshsd_get_ro(struct mmc_host *mmc)
+{
+ struct toshsd_host *host = mmc_priv(mmc);
+
+ /* active low */
+ return !(ioread16(host->ioaddr + SD_CARDSTATUS) & SD_CARD_WRITE_PROTECT);
+}
+
+static int toshsd_get_cd(struct mmc_host *mmc)
+{
+ struct toshsd_host *host = mmc_priv(mmc);
+
+ return !!(ioread16(host->ioaddr + SD_CARDSTATUS) & SD_CARD_PRESENT_0);
+}
+
+static struct mmc_host_ops toshsd_ops = {
+ .request = toshsd_request,
+ .set_ios = toshsd_set_ios,
+ .get_ro = toshsd_get_ro,
+ .get_cd = toshsd_get_cd,
+};
+
+
+static void toshsd_powerdown(struct toshsd_host *host)
+{
+ /* mask all interrupts */
+ iowrite32(0xffffffff, host->ioaddr + SD_INTMASKCARD);
+ /* disable card clock */
+ iowrite16(0x000, host->ioaddr + SDIO_BASE + SDIO_CLOCKNWAITCTRL);
+ iowrite16(0, host->ioaddr + SD_CARDCLOCKCTRL);
+ /* power down card */
+ pci_write_config_byte(host->pdev, SD_PCICFG_POWER1, SD_PCICFG_PWR1_OFF);
+ /* disable clock */
+ pci_write_config_byte(host->pdev, SD_PCICFG_CLKSTOP, 0);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int toshsd_pm_suspend(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct toshsd_host *host = pci_get_drvdata(pdev);
+
+ toshsd_powerdown(host);
+
+ pci_save_state(pdev);
+ pci_enable_wake(pdev, PCI_D3hot, 0);
+ pci_disable_device(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ return 0;
+}
+
+static int toshsd_pm_resume(struct device *dev)
+{
+ struct pci_dev *pdev = to_pci_dev(dev);
+ struct toshsd_host *host = pci_get_drvdata(pdev);
+ int ret;
+
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ ret = pci_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ toshsd_init(host);
+
+ return 0;
+}
+#endif /* CONFIG_PM_SLEEP */
+
+static int toshsd_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
+{
+ int ret;
+ struct toshsd_host *host;
+ struct mmc_host *mmc;
+ resource_size_t base;
+
+ ret = pci_enable_device(pdev);
+ if (ret)
+ return ret;
+
+ mmc = mmc_alloc_host(sizeof(struct toshsd_host), &pdev->dev);
+ if (!mmc) {
+ ret = -ENOMEM;
+ goto err;
+ }
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+
+ host->pdev = pdev;
+ pci_set_drvdata(pdev, host);
+
+ ret = pci_request_regions(pdev, DRIVER_NAME);
+ if (ret)
+ goto free;
+
+ host->ioaddr = pci_iomap(pdev, 0, 0);
+ if (!host->ioaddr) {
+ ret = -ENOMEM;
+ goto release;
+ }
+
+ /* Set MMC host parameters */
+ mmc->ops = &toshsd_ops;
+ mmc->caps = MMC_CAP_4_BIT_DATA;
+ mmc->ocr_avail = MMC_VDD_32_33;
+
+ mmc->f_min = HCLK / 512;
+ mmc->f_max = HCLK;
+
+ spin_lock_init(&host->lock);
+
+ toshsd_init(host);
+
+ ret = request_threaded_irq(pdev->irq, toshsd_irq, toshsd_thread_irq,
+ IRQF_SHARED, DRIVER_NAME, host);
+ if (ret)
+ goto unmap;
+
+ mmc_add_host(mmc);
+
+ base = pci_resource_start(pdev, 0);
+ dev_dbg(&pdev->dev, "MMIO %pa, IRQ %d\n", &base, pdev->irq);
+
+ pm_suspend_ignore_children(&pdev->dev, 1);
+
+ return 0;
+
+unmap:
+ pci_iounmap(pdev, host->ioaddr);
+release:
+ pci_release_regions(pdev);
+free:
+ mmc_free_host(mmc);
+ pci_set_drvdata(pdev, NULL);
+err:
+ pci_disable_device(pdev);
+ return ret;
+}
+
+static void toshsd_remove(struct pci_dev *pdev)
+{
+ struct toshsd_host *host = pci_get_drvdata(pdev);
+
+ mmc_remove_host(host->mmc);
+ toshsd_powerdown(host);
+ free_irq(pdev->irq, host);
+ pci_iounmap(pdev, host->ioaddr);
+ pci_release_regions(pdev);
+ mmc_free_host(host->mmc);
+ pci_set_drvdata(pdev, NULL);
+ pci_disable_device(pdev);
+}
+
+static const struct dev_pm_ops toshsd_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(toshsd_pm_suspend, toshsd_pm_resume)
+};
+
+static struct pci_driver toshsd_driver = {
+ .name = DRIVER_NAME,
+ .id_table = pci_ids,
+ .probe = toshsd_probe,
+ .remove = toshsd_remove,
+ .driver.pm = &toshsd_pm_ops,
+};
+
+static int __init toshsd_drv_init(void)
+{
+ return pci_register_driver(&toshsd_driver);
+}
+
+static void __exit toshsd_drv_exit(void)
+{
+ pci_unregister_driver(&toshsd_driver);
+}
+
+module_init(toshsd_drv_init);
+module_exit(toshsd_drv_exit);
+
+MODULE_AUTHOR("Ondrej Zary, Richard Betts");
+MODULE_DESCRIPTION("Toshiba PCI Secure Digital Host Controller Interface driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Toshiba PCI Secure Digital Host Controller Interface driver
+ *
+ * Copyright (C) 2014 Ondrej Zary
+ * Copyright (C) 2007 Richard Betts, All Rights Reserved.
+ *
+ * Based on asic3_mmc.c Copyright (c) 2005 SDG Systems, LLC
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or (at
+ * your option) any later version.
+ */
+
+#define HCLK 33000000 /* 33 MHz (PCI clock) */
+
+#define SD_PCICFG_CLKSTOP 0x40 /* 0x1f = clock controller, 0 = stop */
+#define SD_PCICFG_GATEDCLK 0x41 /* Gated clock */
+#define SD_PCICFG_CLKMODE 0x42 /* Control clock of SD controller */
+#define SD_PCICFG_PINSTATUS 0x44 /* R/O: read status of SD pins */
+#define SD_PCICFG_POWER1 0x48
+#define SD_PCICFG_POWER2 0x49
+#define SD_PCICFG_POWER3 0x4a
+#define SD_PCICFG_CARDDETECT 0x4c
+#define SD_PCICFG_SLOTS 0x50 /* R/O: define support slot number */
+#define SD_PCICFG_EXTGATECLK1 0xf0 /* Could be used for gated clock */
+#define SD_PCICFG_EXTGATECLK2 0xf1 /* Could be used for gated clock */
+#define SD_PCICFG_EXTGATECLK3 0xf9 /* Bit 1: double buffer/single buffer */
+#define SD_PCICFG_SDLED_ENABLE1 0xfa
+#define SD_PCICFG_SDLED_ENABLE2 0xfe
+
+#define SD_PCICFG_CLKMODE_DIV_DISABLE BIT(0)
+#define SD_PCICFG_CLKSTOP_ENABLE_ALL 0x1f
+#define SD_PCICFG_LED_ENABLE1_START 0x12
+#define SD_PCICFG_LED_ENABLE2_START 0x80
+
+#define SD_PCICFG_PWR1_33V 0x08 /* Set for 3.3 volts */
+#define SD_PCICFG_PWR1_OFF 0x00 /* Turn off power */
+#define SD_PCICFG_PWR2_AUTO 0x02
+
+#define SD_CMD 0x00 /* also for SDIO */
+#define SD_ARG0 0x04 /* also for SDIO */
+#define SD_ARG1 0x06 /* also for SDIO */
+#define SD_STOPINTERNAL 0x08
+#define SD_BLOCKCOUNT 0x0a /* also for SDIO */
+#define SD_RESPONSE0 0x0c /* also for SDIO */
+#define SD_RESPONSE1 0x0e /* also for SDIO */
+#define SD_RESPONSE2 0x10 /* also for SDIO */
+#define SD_RESPONSE3 0x12 /* also for SDIO */
+#define SD_RESPONSE4 0x14 /* also for SDIO */
+#define SD_RESPONSE5 0x16 /* also for SDIO */
+#define SD_RESPONSE6 0x18 /* also for SDIO */
+#define SD_RESPONSE7 0x1a /* also for SDIO */
+#define SD_CARDSTATUS 0x1c /* also for SDIO */
+#define SD_BUFFERCTRL 0x1e /* also for SDIO */
+#define SD_INTMASKCARD 0x20 /* also for SDIO */
+#define SD_INTMASKBUFFER 0x22 /* also for SDIO */
+#define SD_CARDCLOCKCTRL 0x24
+#define SD_CARDXFERDATALEN 0x26 /* also for SDIO */
+#define SD_CARDOPTIONSETUP 0x28 /* also for SDIO */
+#define SD_ERRORSTATUS0 0x2c /* also for SDIO */
+#define SD_ERRORSTATUS1 0x2e /* also for SDIO */
+#define SD_DATAPORT 0x30 /* also for SDIO */
+#define SD_TRANSACTIONCTRL 0x34 /* also for SDIO */
+#define SD_SOFTWARERESET 0xe0 /* also for SDIO */
+
+/* registers above marked "also for SDIO" and all SDIO registers below can be
+ * accessed at SDIO_BASE + reg address */
+#define SDIO_BASE 0x100
+
+#define SDIO_CARDPORTSEL 0x02
+#define SDIO_CARDINTCTRL 0x36
+#define SDIO_CLOCKNWAITCTRL 0x38
+#define SDIO_HOSTINFORMATION 0x3a
+#define SDIO_ERRORCTRL 0x3c
+#define SDIO_LEDCTRL 0x3e
+
+#define SD_TRANSCTL_SET BIT(8)
+
+#define SD_CARDCLK_DIV_DISABLE BIT(15)
+#define SD_CARDCLK_ENABLE_CLOCK BIT(8)
+#define SD_CARDCLK_CLK_DIV_512 BIT(7)
+#define SD_CARDCLK_CLK_DIV_256 BIT(6)
+#define SD_CARDCLK_CLK_DIV_128 BIT(5)
+#define SD_CARDCLK_CLK_DIV_64 BIT(4)
+#define SD_CARDCLK_CLK_DIV_32 BIT(3)
+#define SD_CARDCLK_CLK_DIV_16 BIT(2)
+#define SD_CARDCLK_CLK_DIV_8 BIT(1)
+#define SD_CARDCLK_CLK_DIV_4 BIT(0)
+#define SD_CARDCLK_CLK_DIV_2 0
+
+#define SD_CARDOPT_REQUIRED 0x000e
+#define SD_CARDOPT_DATA_RESP_TIMEOUT(x) (((x) & 0x0f) << 4) /* 4 bits */
+#define SD_CARDOPT_C2_MODULE_ABSENT BIT(14)
+#define SD_CARDOPT_DATA_XFR_WIDTH_1 (1 << 15)
+#define SD_CARDOPT_DATA_XFR_WIDTH_4 (0 << 15)
+
+#define SD_CMD_TYPE_CMD (0 << 6)
+#define SD_CMD_TYPE_ACMD (1 << 6)
+#define SD_CMD_TYPE_AUTHEN (2 << 6)
+#define SD_CMD_RESP_TYPE_NONE (3 << 8)
+#define SD_CMD_RESP_TYPE_EXT_R1 (4 << 8)
+#define SD_CMD_RESP_TYPE_EXT_R1B (5 << 8)
+#define SD_CMD_RESP_TYPE_EXT_R2 (6 << 8)
+#define SD_CMD_RESP_TYPE_EXT_R3 (7 << 8)
+#define SD_CMD_RESP_TYPE_EXT_R6 (4 << 8)
+#define SD_CMD_RESP_TYPE_EXT_R7 (4 << 8)
+#define SD_CMD_DATA_PRESENT BIT(11)
+#define SD_CMD_TRANSFER_READ BIT(12)
+#define SD_CMD_MULTI_BLOCK BIT(13)
+#define SD_CMD_SECURITY_CMD BIT(14)
+
+#define SD_STOPINT_ISSUE_CMD12 BIT(0)
+#define SD_STOPINT_AUTO_ISSUE_CMD12 BIT(8)
+
+#define SD_CARD_RESP_END BIT(0)
+#define SD_CARD_RW_END BIT(2)
+#define SD_CARD_CARD_REMOVED_0 BIT(3)
+#define SD_CARD_CARD_INSERTED_0 BIT(4)
+#define SD_CARD_PRESENT_0 BIT(5)
+#define SD_CARD_UNK6 BIT(6)
+#define SD_CARD_WRITE_PROTECT BIT(7)
+#define SD_CARD_CARD_REMOVED_3 BIT(8)
+#define SD_CARD_CARD_INSERTED_3 BIT(9)
+#define SD_CARD_PRESENT_3 BIT(10)
+
+#define SD_BUF_CMD_INDEX_ERR BIT(16)
+#define SD_BUF_CRC_ERR BIT(17)
+#define SD_BUF_STOP_BIT_END_ERR BIT(18)
+#define SD_BUF_DATA_TIMEOUT BIT(19)
+#define SD_BUF_OVERFLOW BIT(20)
+#define SD_BUF_UNDERFLOW BIT(21)
+#define SD_BUF_CMD_TIMEOUT BIT(22)
+#define SD_BUF_UNK7 BIT(23)
+#define SD_BUF_READ_ENABLE BIT(24)
+#define SD_BUF_WRITE_ENABLE BIT(25)
+#define SD_BUF_ILLEGAL_FUNCTION BIT(29)
+#define SD_BUF_CMD_BUSY BIT(30)
+#define SD_BUF_ILLEGAL_ACCESS BIT(31)
+
+#define SD_ERR0_RESP_CMD_ERR BIT(0)
+#define SD_ERR0_RESP_NON_CMD12_END_BIT_ERR BIT(2)
+#define SD_ERR0_RESP_CMD12_END_BIT_ERR BIT(3)
+#define SD_ERR0_READ_DATA_END_BIT_ERR BIT(4)
+#define SD_ERR0_WRITE_CRC_STATUS_END_BIT_ERR BIT(5)
+#define SD_ERR0_RESP_NON_CMD12_CRC_ERR BIT(8)
+#define SD_ERR0_RESP_CMD12_CRC_ERR BIT(9)
+#define SD_ERR0_READ_DATA_CRC_ERR BIT(10)
+#define SD_ERR0_WRITE_CMD_CRC_ERR BIT(11)
+
+#define SD_ERR1_NO_CMD_RESP BIT(16)
+#define SD_ERR1_TIMEOUT_READ_DATA BIT(20)
+#define SD_ERR1_TIMEOUT_CRS_STATUS BIT(21)
+#define SD_ERR1_TIMEOUT_CRC_BUSY BIT(22)
+
+#define IRQ_DONT_CARE_BITS (SD_CARD_PRESENT_3 \
+ | SD_CARD_WRITE_PROTECT \
+ | SD_CARD_UNK6 \
+ | SD_CARD_PRESENT_0 \
+ | SD_BUF_UNK7 \
+ | SD_BUF_CMD_BUSY)
+
+struct toshsd_host {
+ struct pci_dev *pdev;
+ struct mmc_host *mmc;
+
+ spinlock_t lock;
+
+ struct mmc_request *mrq;/* Current request */
+ struct mmc_command *cmd;/* Current command */
+ struct mmc_data *data; /* Current data request */
+
+ struct sg_mapping_iter sg_miter; /* for PIO */
+
+ void __iomem *ioaddr; /* mapped address */
+};
/* Go to known state. Chip may have been power cycled */
if (chip->state == FL_PM_SUSPENDED) {
+ /* Refresh LH28F640BF Partition Config. Register */
+ fixup_LH28F640BF(mtd);
map_write(map, CMD(0xFF), cfi->chips[i].start);
chip->oldstate = chip->state = FL_READY;
wake_up(&chip->wq);
{
struct mtd_part_parser_data ppdata;
struct flash_platform_data *data;
- const struct spi_device_id *id = NULL;
struct m25p *flash;
struct spi_nor *nor;
enum read_mode mode = SPI_NOR_NORMAL;
+ char *flash_name = NULL;
int ret;
data = dev_get_platdata(&spi->dev);
* If that's the case, respect "type" and ignore a "name".
*/
if (data && data->type)
- id = spi_nor_match_id(data->type);
+ flash_name = data->type;
+ else
+ flash_name = spi->modalias;
- /* If we didn't get name from platform, simply use "modalias". */
- if (!id)
- id = spi_get_device_id(spi);
-
- ret = spi_nor_scan(nor, id, mode);
+ ret = spi_nor_scan(nor, flash_name, mode);
if (ret)
return ret;
}
+/*
+ * XXX This needs to be kept in sync with spi_nor_ids. We can't share
+ * it with spi-nor, because if this is built as a module then modpost
+ * won't be able to read it and add appropriate aliases.
+ */
+static const struct spi_device_id m25p_ids[] = {
+ {"at25fs010"}, {"at25fs040"}, {"at25df041a"}, {"at25df321a"},
+ {"at25df641"}, {"at26f004"}, {"at26df081a"}, {"at26df161a"},
+ {"at26df321"}, {"at45db081d"},
+ {"en25f32"}, {"en25p32"}, {"en25q32b"}, {"en25p64"},
+ {"en25q64"}, {"en25qh128"}, {"en25qh256"},
+ {"f25l32pa"},
+ {"mr25h256"}, {"mr25h10"},
+ {"gd25q32"}, {"gd25q64"},
+ {"160s33b"}, {"320s33b"}, {"640s33b"},
+ {"mx25l2005a"}, {"mx25l4005a"}, {"mx25l8005"}, {"mx25l1606e"},
+ {"mx25l3205d"}, {"mx25l3255e"}, {"mx25l6405d"}, {"mx25l12805d"},
+ {"mx25l12855e"},{"mx25l25635e"},{"mx25l25655e"},{"mx66l51235l"},
+ {"mx66l1g55g"},
+ {"n25q064"}, {"n25q128a11"}, {"n25q128a13"}, {"n25q256a"},
+ {"n25q512a"}, {"n25q512ax3"}, {"n25q00"},
+ {"pm25lv512"}, {"pm25lv010"}, {"pm25lq032"},
+ {"s25sl032p"}, {"s25sl064p"}, {"s25fl256s0"}, {"s25fl256s1"},
+ {"s25fl512s"}, {"s70fl01gs"}, {"s25sl12800"}, {"s25sl12801"},
+ {"s25fl129p0"}, {"s25fl129p1"}, {"s25sl004a"}, {"s25sl008a"},
+ {"s25sl016a"}, {"s25sl032a"}, {"s25sl064a"}, {"s25fl008k"},
+ {"s25fl016k"}, {"s25fl064k"},
+ {"sst25vf040b"},{"sst25vf080b"},{"sst25vf016b"},{"sst25vf032b"},
+ {"sst25vf064c"},{"sst25wf512"}, {"sst25wf010"}, {"sst25wf020"},
+ {"sst25wf040"},
+ {"m25p05"}, {"m25p10"}, {"m25p20"}, {"m25p40"},
+ {"m25p80"}, {"m25p16"}, {"m25p32"}, {"m25p64"},
+ {"m25p128"}, {"n25q032"},
+ {"m25p05-nonjedec"}, {"m25p10-nonjedec"}, {"m25p20-nonjedec"},
+ {"m25p40-nonjedec"}, {"m25p80-nonjedec"}, {"m25p16-nonjedec"},
+ {"m25p32-nonjedec"}, {"m25p64-nonjedec"}, {"m25p128-nonjedec"},
+ {"m45pe10"}, {"m45pe80"}, {"m45pe16"},
+ {"m25pe20"}, {"m25pe80"}, {"m25pe16"},
+ {"m25px16"}, {"m25px32"}, {"m25px32-s0"}, {"m25px32-s1"},
+ {"m25px64"},
+ {"w25x10"}, {"w25x20"}, {"w25x40"}, {"w25x80"},
+ {"w25x16"}, {"w25x32"}, {"w25q32"}, {"w25q32dw"},
+ {"w25x64"}, {"w25q64"}, {"w25q128"}, {"w25q80"},
+ {"w25q80bl"}, {"w25q128"}, {"w25q256"}, {"cat25c11"},
+ {"cat25c03"}, {"cat25c09"}, {"cat25c17"}, {"cat25128"},
+ { },
+};
+MODULE_DEVICE_TABLE(spi, m25p_ids);
+
+
static struct spi_driver m25p80_driver = {
.driver = {
.name = "m25p80",
.owner = THIS_MODULE,
},
- .id_table = spi_nor_ids,
+ .id_table = m25p_ids,
.probe = m25p_probe,
.remove = m25p_remove,
if (!info) {
dev_err(dev, "Unable to configure elm - device not probed?\n");
- return -ENODEV;
+ return -EPROBE_DEFER;
}
/* ELM cannot detect ECC errors for chunks > 1KB */
if (ecc_step_size > ((ELM_ECC_SIZE + 1) / 2)) {
/* iterate the subnodes. */
for_each_available_child_of_node(dev->of_node, np) {
- const struct spi_device_id *id;
char modalias[40];
/* skip the holes */
if (of_modalias_node(np, modalias, sizeof(modalias)) < 0)
goto map_failed;
- id = spi_nor_match_id(modalias);
- if (!id)
- goto map_failed;
-
ret = of_property_read_u32(np, "spi-max-frequency",
&q->clk_rate);
if (ret < 0)
/* set the chip address for READID */
fsl_qspi_set_base_addr(q, nor);
- ret = spi_nor_scan(nor, id, SPI_NOR_QUAD);
+ ret = spi_nor_scan(nor, modalias, SPI_NOR_QUAD);
if (ret)
goto map_failed;
#define JEDEC_MFR(_jedec_id) ((_jedec_id) >> 16)
+static const struct spi_device_id *spi_nor_match_id(const char *name);
+
/*
* Read the status register, returning its value in the location
* Return the status register value.
* more nor chips. This current list focusses on newer chips, which
* have been converging on command sets which including JEDEC ID.
*/
-const struct spi_device_id spi_nor_ids[] = {
+static const struct spi_device_id spi_nor_ids[] = {
/* Atmel -- some are (confusingly) marketed as "DataFlash" */
{ "at25fs010", INFO(0x1f6601, 0, 32 * 1024, 4, SECT_4K) },
{ "at25fs040", INFO(0x1f6604, 0, 64 * 1024, 8, SECT_4K) },
{ "cat25128", CAT25_INFO(2048, 8, 64, 2, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
{ },
};
-EXPORT_SYMBOL_GPL(spi_nor_ids);
static const struct spi_device_id *spi_nor_read_id(struct spi_nor *nor)
{
return 0;
}
-int spi_nor_scan(struct spi_nor *nor, const struct spi_device_id *id,
- enum read_mode mode)
+int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode)
{
+ const struct spi_device_id *id = NULL;
struct flash_info *info;
struct device *dev = nor->dev;
struct mtd_info *mtd = nor->mtd;
if (ret)
return ret;
+ id = spi_nor_match_id(name);
+ if (!id)
+ return -ENOENT;
+
info = (void *)id->driver_data;
if (info->jedec_id) {
}
EXPORT_SYMBOL_GPL(spi_nor_scan);
-const struct spi_device_id *spi_nor_match_id(char *name)
+static const struct spi_device_id *spi_nor_match_id(const char *name)
{
const struct spi_device_id *id = spi_nor_ids;
}
return NULL;
}
-EXPORT_SYMBOL_GPL(spi_nor_match_id);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Huang Shijie <shijie8@gmail.com>");
config MACVTAP
tristate "MAC-VLAN based tap driver"
depends on MACVLAN
+ depends on INET
help
This adds a specialized tap character device driver that is based
on the MAC-VLAN network interface, called macvtap. A macvtap device
config TUN
tristate "Universal TUN/TAP device driver support"
+ depends on INET
select CRC32
---help---
TUN/TAP provides packet reception and transmission for user space
bond_slave_state_change(bond);
if (BOND_MODE(bond) == BOND_MODE_XOR)
bond_update_slave_arr(bond, NULL);
- } else if (do_failover) {
+ }
+ if (do_failover) {
block_netpoll_tx();
bond_select_active_slave(bond);
unblock_netpoll_tx();
bond_option_arp_ip_targets_clear(bond);
nla_for_each_nested(attr, data[IFLA_BOND_ARP_IP_TARGET], rem) {
- __be32 target = nla_get_be32(attr);
+ __be32 target;
+
+ if (nla_len(attr) < sizeof(target))
+ return -EINVAL;
+
+ target = nla_get_be32(attr);
bond_opt_initval(&newval, (__force u64)target);
err = __bond_opt_set(bond, BOND_OPT_ARP_TARGETS,
long rate;
u64 v64;
- /* Use CIA recommended sample points */
+ /* Use CiA recommended sample points */
if (bt->sample_point) {
sampl_pt = bt->sample_point;
} else {
BUG_ON(idx >= priv->echo_skb_max);
if (priv->echo_skb[idx]) {
- kfree_skb(priv->echo_skb[idx]);
+ dev_kfree_skb_any(priv->echo_skb[idx]);
priv->echo_skb[idx] = NULL;
}
}
config CAN_M_CAN
+ depends on HAS_IOMEM
tristate "Bosch M_CAN devices"
---help---
Say Y here if you want to support for Bosch M_CAN controller.
MRAM_CFG_NUM,
};
+/* Fast Bit Timing & Prescaler Register (FBTP) */
+#define FBTR_FBRP_MASK 0x1f
+#define FBTR_FBRP_SHIFT 16
+#define FBTR_FTSEG1_SHIFT 8
+#define FBTR_FTSEG1_MASK (0xf << FBTR_FTSEG1_SHIFT)
+#define FBTR_FTSEG2_SHIFT 4
+#define FBTR_FTSEG2_MASK (0x7 << FBTR_FTSEG2_SHIFT)
+#define FBTR_FSJW_SHIFT 0
+#define FBTR_FSJW_MASK 0x3
+
/* Test Register (TEST) */
#define TEST_LBCK BIT(4)
/* CC Control Register(CCCR) */
-#define CCCR_TEST BIT(7)
-#define CCCR_MON BIT(5)
-#define CCCR_CCE BIT(1)
-#define CCCR_INIT BIT(0)
+#define CCCR_TEST BIT(7)
+#define CCCR_CMR_MASK 0x3
+#define CCCR_CMR_SHIFT 10
+#define CCCR_CMR_CANFD 0x1
+#define CCCR_CMR_CANFD_BRS 0x2
+#define CCCR_CMR_CAN 0x3
+#define CCCR_CME_MASK 0x3
+#define CCCR_CME_SHIFT 8
+#define CCCR_CME_CAN 0
+#define CCCR_CME_CANFD 0x1
+#define CCCR_CME_CANFD_BRS 0x2
+#define CCCR_TEST BIT(7)
+#define CCCR_MON BIT(5)
+#define CCCR_CCE BIT(1)
+#define CCCR_INIT BIT(0)
+#define CCCR_CANFD 0x10
/* Bit Timing & Prescaler Register (BTP) */
#define BTR_BRP_MASK 0x3ff
/* Rx Buffer / FIFO Element Size Configuration (RXESC) */
#define M_CAN_RXESC_8BYTES 0x0
+#define M_CAN_RXESC_64BYTES 0x777
/* Tx Buffer Configuration(TXBC) */
#define TXBC_NDTB_OFF 16
/* Tx Buffer Element Size Configuration(TXESC) */
#define TXESC_TBDS_8BYTES 0x0
+#define TXESC_TBDS_64BYTES 0x7
/* Tx Event FIFO Con.guration (TXEFC) */
#define TXEFC_EFS_OFF 16
/* Message RAM Configuration (in bytes) */
#define SIDF_ELEMENT_SIZE 4
#define XIDF_ELEMENT_SIZE 8
-#define RXF0_ELEMENT_SIZE 16
-#define RXF1_ELEMENT_SIZE 16
+#define RXF0_ELEMENT_SIZE 72
+#define RXF1_ELEMENT_SIZE 72
#define RXB_ELEMENT_SIZE 16
#define TXE_ELEMENT_SIZE 8
-#define TXB_ELEMENT_SIZE 16
+#define TXB_ELEMENT_SIZE 72
/* Message RAM Elements */
#define M_CAN_FIFO_ID 0x0
#define M_CAN_FIFO_DATA(n) (0x8 + ((n) << 2))
/* Rx Buffer Element */
+/* R0 */
#define RX_BUF_ESI BIT(31)
#define RX_BUF_XTD BIT(30)
#define RX_BUF_RTR BIT(29)
+/* R1 */
+#define RX_BUF_ANMF BIT(31)
+#define RX_BUF_EDL BIT(21)
+#define RX_BUF_BRS BIT(20)
/* Tx Buffer Element */
+/* R0 */
#define TX_BUF_XTD BIT(30)
#define TX_BUF_RTR BIT(29)
if (enable) {
/* enable m_can configuration */
m_can_write(priv, M_CAN_CCCR, cccr | CCCR_INIT);
+ udelay(5);
/* CCCR.CCE can only be set/reset while CCCR.INIT = '1' */
m_can_write(priv, M_CAN_CCCR, cccr | CCCR_INIT | CCCR_CCE);
} else {
m_can_write(priv, M_CAN_ILE, 0x0);
}
-static void m_can_read_fifo(const struct net_device *dev, struct can_frame *cf,
- u32 rxfs)
+static void m_can_read_fifo(struct net_device *dev, u32 rxfs)
{
+ struct net_device_stats *stats = &dev->stats;
struct m_can_priv *priv = netdev_priv(dev);
- u32 id, fgi;
+ struct canfd_frame *cf;
+ struct sk_buff *skb;
+ u32 id, fgi, dlc;
+ int i;
/* calculate the fifo get index for where to read data */
fgi = (rxfs & RXFS_FGI_MASK) >> RXFS_FGI_OFF;
+ dlc = m_can_fifo_read(priv, fgi, M_CAN_FIFO_DLC);
+ if (dlc & RX_BUF_EDL)
+ skb = alloc_canfd_skb(dev, &cf);
+ else
+ skb = alloc_can_skb(dev, (struct can_frame **)&cf);
+ if (!skb) {
+ stats->rx_dropped++;
+ return;
+ }
+
+ if (dlc & RX_BUF_EDL)
+ cf->len = can_dlc2len((dlc >> 16) & 0x0F);
+ else
+ cf->len = get_can_dlc((dlc >> 16) & 0x0F);
+
id = m_can_fifo_read(priv, fgi, M_CAN_FIFO_ID);
if (id & RX_BUF_XTD)
cf->can_id = (id & CAN_EFF_MASK) | CAN_EFF_FLAG;
else
cf->can_id = (id >> 18) & CAN_SFF_MASK;
- if (id & RX_BUF_RTR) {
+ if (id & RX_BUF_ESI) {
+ cf->flags |= CANFD_ESI;
+ netdev_dbg(dev, "ESI Error\n");
+ }
+
+ if (!(dlc & RX_BUF_EDL) && (id & RX_BUF_RTR)) {
cf->can_id |= CAN_RTR_FLAG;
} else {
- id = m_can_fifo_read(priv, fgi, M_CAN_FIFO_DLC);
- cf->can_dlc = get_can_dlc((id >> 16) & 0x0F);
- *(u32 *)(cf->data + 0) = m_can_fifo_read(priv, fgi,
- M_CAN_FIFO_DATA(0));
- *(u32 *)(cf->data + 4) = m_can_fifo_read(priv, fgi,
- M_CAN_FIFO_DATA(1));
+ if (dlc & RX_BUF_BRS)
+ cf->flags |= CANFD_BRS;
+
+ for (i = 0; i < cf->len; i += 4)
+ *(u32 *)(cf->data + i) =
+ m_can_fifo_read(priv, fgi,
+ M_CAN_FIFO_DATA(i / 4));
}
/* acknowledge rx fifo 0 */
m_can_write(priv, M_CAN_RXF0A, fgi);
+
+ stats->rx_packets++;
+ stats->rx_bytes += cf->len;
+
+ netif_receive_skb(skb);
}
static int m_can_do_rx_poll(struct net_device *dev, int quota)
{
struct m_can_priv *priv = netdev_priv(dev);
- struct net_device_stats *stats = &dev->stats;
- struct sk_buff *skb;
- struct can_frame *frame;
u32 pkts = 0;
u32 rxfs;
if (rxfs & RXFS_RFL)
netdev_warn(dev, "Rx FIFO 0 Message Lost\n");
- skb = alloc_can_skb(dev, &frame);
- if (!skb) {
- stats->rx_dropped++;
- return pkts;
- }
-
- m_can_read_fifo(dev, frame, rxfs);
-
- stats->rx_packets++;
- stats->rx_bytes += frame->can_dlc;
-
- netif_receive_skb(skb);
+ m_can_read_fifo(dev, rxfs);
quota--;
pkts++;
return 1;
}
+static int __m_can_get_berr_counter(const struct net_device *dev,
+ struct can_berr_counter *bec)
+{
+ struct m_can_priv *priv = netdev_priv(dev);
+ unsigned int ecr;
+
+ ecr = m_can_read(priv, M_CAN_ECR);
+ bec->rxerr = (ecr & ECR_REC_MASK) >> ECR_REC_SHIFT;
+ bec->txerr = ecr & ECR_TEC_MASK;
+
+ return 0;
+}
+
static int m_can_get_berr_counter(const struct net_device *dev,
struct can_berr_counter *bec)
{
struct m_can_priv *priv = netdev_priv(dev);
- unsigned int ecr;
int err;
err = clk_prepare_enable(priv->hclk);
return err;
}
- ecr = m_can_read(priv, M_CAN_ECR);
- bec->rxerr = (ecr & ECR_REC_MASK) >> ECR_REC_SHIFT;
- bec->txerr = ecr & ECR_TEC_MASK;
+ __m_can_get_berr_counter(dev, bec);
clk_disable_unprepare(priv->cclk);
clk_disable_unprepare(priv->hclk);
if (unlikely(!skb))
return 0;
- m_can_get_berr_counter(dev, &bec);
+ __m_can_get_berr_counter(dev, &bec);
switch (new_state) {
case CAN_STATE_ERROR_ACTIVE:
if ((psr & PSR_EP) &&
(priv->can.state != CAN_STATE_ERROR_PASSIVE)) {
- netdev_dbg(dev, "entered error warning state\n");
+ netdev_dbg(dev, "entered error passive state\n");
work_done += m_can_handle_state_change(dev,
CAN_STATE_ERROR_PASSIVE);
}
if ((psr & PSR_BO) &&
(priv->can.state != CAN_STATE_BUS_OFF)) {
- netdev_dbg(dev, "entered error warning state\n");
+ netdev_dbg(dev, "entered error bus off state\n");
work_done += m_can_handle_state_change(dev,
CAN_STATE_BUS_OFF);
}
{
if (irqstatus & IR_WDI)
netdev_err(dev, "Message RAM Watchdog event due to missing READY\n");
- if (irqstatus & IR_BEU)
+ if (irqstatus & IR_ELO)
netdev_err(dev, "Error Logging Overflow\n");
if (irqstatus & IR_BEU)
netdev_err(dev, "Bit Error Uncorrected\n");
.brp_inc = 1,
};
+static const struct can_bittiming_const m_can_data_bittiming_const = {
+ .name = KBUILD_MODNAME,
+ .tseg1_min = 2, /* Time segment 1 = prop_seg + phase_seg1 */
+ .tseg1_max = 16,
+ .tseg2_min = 1, /* Time segment 2 = phase_seg2 */
+ .tseg2_max = 8,
+ .sjw_max = 4,
+ .brp_min = 1,
+ .brp_max = 32,
+ .brp_inc = 1,
+};
+
static int m_can_set_bittiming(struct net_device *dev)
{
struct m_can_priv *priv = netdev_priv(dev);
const struct can_bittiming *bt = &priv->can.bittiming;
+ const struct can_bittiming *dbt = &priv->can.data_bittiming;
u16 brp, sjw, tseg1, tseg2;
u32 reg_btp;
reg_btp = (brp << BTR_BRP_SHIFT) | (sjw << BTR_SJW_SHIFT) |
(tseg1 << BTR_TSEG1_SHIFT) | (tseg2 << BTR_TSEG2_SHIFT);
m_can_write(priv, M_CAN_BTP, reg_btp);
- netdev_dbg(dev, "setting BTP 0x%x\n", reg_btp);
+
+ if (priv->can.ctrlmode & CAN_CTRLMODE_FD) {
+ brp = dbt->brp - 1;
+ sjw = dbt->sjw - 1;
+ tseg1 = dbt->prop_seg + dbt->phase_seg1 - 1;
+ tseg2 = dbt->phase_seg2 - 1;
+ reg_btp = (brp << FBTR_FBRP_SHIFT) | (sjw << FBTR_FSJW_SHIFT) |
+ (tseg1 << FBTR_FTSEG1_SHIFT) |
+ (tseg2 << FBTR_FTSEG2_SHIFT);
+ m_can_write(priv, M_CAN_FBTP, reg_btp);
+ }
return 0;
}
m_can_config_endisable(priv, true);
- /* RX Buffer/FIFO Element Size 8 bytes data field */
- m_can_write(priv, M_CAN_RXESC, M_CAN_RXESC_8BYTES);
+ /* RX Buffer/FIFO Element Size 64 bytes data field */
+ m_can_write(priv, M_CAN_RXESC, M_CAN_RXESC_64BYTES);
/* Accept Non-matching Frames Into FIFO 0 */
m_can_write(priv, M_CAN_GFC, 0x0);
m_can_write(priv, M_CAN_TXBC, (1 << TXBC_NDTB_OFF) |
priv->mcfg[MRAM_TXB].off);
- /* only support 8 bytes firstly */
- m_can_write(priv, M_CAN_TXESC, TXESC_TBDS_8BYTES);
+ /* support 64 bytes payload */
+ m_can_write(priv, M_CAN_TXESC, TXESC_TBDS_64BYTES);
m_can_write(priv, M_CAN_TXEFC, (1 << TXEFC_EFS_OFF) |
priv->mcfg[MRAM_TXE].off);
RXFC_FWM_1 | priv->mcfg[MRAM_RXF1].off);
cccr = m_can_read(priv, M_CAN_CCCR);
- cccr &= ~(CCCR_TEST | CCCR_MON);
+ cccr &= ~(CCCR_TEST | CCCR_MON | (CCCR_CMR_MASK << CCCR_CMR_SHIFT) |
+ (CCCR_CME_MASK << CCCR_CME_SHIFT));
test = m_can_read(priv, M_CAN_TEST);
test &= ~TEST_LBCK;
test |= TEST_LBCK;
}
+ if (priv->can.ctrlmode & CAN_CTRLMODE_FD)
+ cccr |= CCCR_CME_CANFD_BRS << CCCR_CME_SHIFT;
+
m_can_write(priv, M_CAN_CCCR, cccr);
m_can_write(priv, M_CAN_TEST, test);
priv->dev = dev;
priv->can.bittiming_const = &m_can_bittiming_const;
+ priv->can.data_bittiming_const = &m_can_data_bittiming_const;
priv->can.do_set_mode = m_can_set_mode;
priv->can.do_get_berr_counter = m_can_get_berr_counter;
priv->can.ctrlmode_supported = CAN_CTRLMODE_LOOPBACK |
CAN_CTRLMODE_LISTENONLY |
- CAN_CTRLMODE_BERR_REPORTING;
+ CAN_CTRLMODE_BERR_REPORTING |
+ CAN_CTRLMODE_FD;
return dev;
}
struct net_device *dev)
{
struct m_can_priv *priv = netdev_priv(dev);
- struct can_frame *cf = (struct can_frame *)skb->data;
- u32 id;
+ struct canfd_frame *cf = (struct canfd_frame *)skb->data;
+ u32 id, cccr;
+ int i;
if (can_dropped_invalid_skb(dev, skb))
return NETDEV_TX_OK;
/* message ram configuration */
m_can_fifo_write(priv, 0, M_CAN_FIFO_ID, id);
- m_can_fifo_write(priv, 0, M_CAN_FIFO_DLC, cf->can_dlc << 16);
- m_can_fifo_write(priv, 0, M_CAN_FIFO_DATA(0), *(u32 *)(cf->data + 0));
- m_can_fifo_write(priv, 0, M_CAN_FIFO_DATA(1), *(u32 *)(cf->data + 4));
+ m_can_fifo_write(priv, 0, M_CAN_FIFO_DLC, can_len2dlc(cf->len) << 16);
+
+ for (i = 0; i < cf->len; i += 4)
+ m_can_fifo_write(priv, 0, M_CAN_FIFO_DATA(i / 4),
+ *(u32 *)(cf->data + i));
+
can_put_echo_skb(skb, dev, 0);
+ if (priv->can.ctrlmode & CAN_CTRLMODE_FD) {
+ cccr = m_can_read(priv, M_CAN_CCCR);
+ cccr &= ~(CCCR_CMR_MASK << CCCR_CMR_SHIFT);
+ if (can_is_canfd_skb(skb)) {
+ if (cf->flags & CANFD_BRS)
+ cccr |= CCCR_CMR_CANFD_BRS << CCCR_CMR_SHIFT;
+ else
+ cccr |= CCCR_CMR_CANFD << CCCR_CMR_SHIFT;
+ } else {
+ cccr |= CCCR_CMR_CAN << CCCR_CMR_SHIFT;
+ }
+ m_can_write(priv, M_CAN_CCCR, cccr);
+ }
+
/* enable first TX buffer to start transfer */
m_can_write(priv, M_CAN_TXBTIE, 0x1);
m_can_write(priv, M_CAN_TXBAR, 0x1);
.ndo_open = m_can_open,
.ndo_stop = m_can_close,
.ndo_start_xmit = m_can_start_xmit,
+ .ndo_change_mtu = can_change_mtu,
};
static int register_m_can_dev(struct net_device *dev)
struct resource *res;
void __iomem *addr;
u32 out_val[MRAM_CFG_LEN];
- int ret;
+ int i, start, end, ret;
/* message ram could be shared */
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "message_ram");
priv->mcfg[MRAM_TXE].off, priv->mcfg[MRAM_TXE].num,
priv->mcfg[MRAM_TXB].off, priv->mcfg[MRAM_TXB].num);
+ /* initialize the entire Message RAM in use to avoid possible
+ * ECC/parity checksum errors when reading an uninitialized buffer
+ */
+ start = priv->mcfg[MRAM_SIDF].off;
+ end = priv->mcfg[MRAM_TXB].off +
+ priv->mcfg[MRAM_TXB].num * TXB_ELEMENT_SIZE;
+ for (i = start; i < end; i += 4)
+ writel(0x0, priv->mram_base + i);
+
return 0;
}
.ndo_open = rcar_can_open,
.ndo_stop = rcar_can_close,
.ndo_start_xmit = rcar_can_start_xmit,
+ .ndo_change_mtu = can_change_mtu,
};
static void rcar_can_rx_pkt(struct rcar_can_priv *priv)
struct net_device *dev;
struct sja1000_priv *priv;
struct kvaser_pci *board;
- int err, init_step;
+ int err;
dev = alloc_sja1000dev(sizeof(struct kvaser_pci));
if (dev == NULL)
if (channel == 0) {
board->xilinx_ver =
ioread8(board->res_addr + XILINX_VERINT) >> 4;
- init_step = 2;
/* Assert PTADR# - we're in passive mode so the other bits are
not important */
priv->irq_flags = IRQF_SHARED;
dev->irq = pdev->irq;
- init_step = 4;
-
dev_info(&pdev->dev, "reg_base=%p conf_addr=%p irq=%d\n",
priv->reg_base, board->conf_addr, dev->irq);
if (urb->actual_length > CPC_HEADER_SIZE) {
struct ems_cpc_msg *msg;
u8 *ibuf = urb->transfer_buffer;
- u8 msg_count, again, start;
+ u8 msg_count, start;
msg_count = ibuf[0] & ~0x80;
- again = ibuf[0] & 0x80;
start = CPC_HEADER_SIZE;
{
struct esd_tx_urb_context *context = urb->context;
struct esd_usb2_net_priv *priv;
- struct esd_usb2 *dev;
struct net_device *netdev;
size_t size = sizeof(struct esd_usb2_msg);
priv = context->priv;
netdev = priv->netdev;
- dev = priv->usb2;
/* free up our allocated buffer */
usb_free_coherent(urb->dev, size,
}
}
unlink_all_urbs(dev);
+ kfree(dev);
}
}
.ndo_open = gs_can_open,
.ndo_stop = gs_can_close,
.ndo_start_xmit = gs_can_start_xmit,
+ .ndo_change_mtu = can_change_mtu,
};
static struct gs_can *gs_make_candev(unsigned int channel, struct usb_interface *intf)
static int xcan_chip_start(struct net_device *ndev)
{
struct xcan_priv *priv = netdev_priv(ndev);
- u32 err, reg_msr, reg_sr_mask;
+ u32 reg_msr, reg_sr_mask;
+ int err;
unsigned long timeout;
/* Check if it is in reset mode */
.ndo_open = xcan_open,
.ndo_stop = xcan_close,
.ndo_start_xmit = xcan_start_xmit,
+ .ndo_change_mtu = can_change_mtu,
};
/**
return IRQ_HANDLED;
}
+static int bcm_sf2_sw_rst(struct bcm_sf2_priv *priv)
+{
+ unsigned int timeout = 1000;
+ u32 reg;
+
+ reg = core_readl(priv, CORE_WATCHDOG_CTRL);
+ reg |= SOFTWARE_RESET | EN_CHIP_RST | EN_SW_RESET;
+ core_writel(priv, reg, CORE_WATCHDOG_CTRL);
+
+ do {
+ reg = core_readl(priv, CORE_WATCHDOG_CTRL);
+ if (!(reg & SOFTWARE_RESET))
+ break;
+
+ usleep_range(1000, 2000);
+ } while (timeout-- > 0);
+
+ if (timeout == 0)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
static int bcm_sf2_sw_setup(struct dsa_switch *ds)
{
const char *reg_names[BCM_SF2_REGS_NUM] = BCM_SF2_REGS_NAME;
*base = of_iomap(dn, i);
if (*base == NULL) {
pr_err("unable to find register: %s\n", reg_names[i]);
- return -ENODEV;
+ ret = -ENOMEM;
+ goto out_unmap;
}
base++;
}
+ ret = bcm_sf2_sw_rst(priv);
+ if (ret) {
+ pr_err("unable to software reset switch: %d\n", ret);
+ goto out_unmap;
+ }
+
/* Disable all interrupts and request them */
intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_MASK_SET);
intrl2_0_writel(priv, 0xffffffff, INTRL2_CPU_CLEAR);
out_unmap:
base = &priv->core;
for (i = 0; i < BCM_SF2_REGS_NUM; i++) {
- iounmap(*base);
+ if (*base)
+ iounmap(*base);
base++;
}
return ret;
return 0;
}
-static int bcm_sf2_sw_rst(struct bcm_sf2_priv *priv)
-{
- unsigned int timeout = 1000;
- u32 reg;
-
- reg = core_readl(priv, CORE_WATCHDOG_CTRL);
- reg |= SOFTWARE_RESET | EN_CHIP_RST | EN_SW_RESET;
- core_writel(priv, reg, CORE_WATCHDOG_CTRL);
-
- do {
- reg = core_readl(priv, CORE_WATCHDOG_CTRL);
- if (!(reg & SOFTWARE_RESET))
- break;
-
- usleep_range(1000, 2000);
- } while (timeout-- > 0);
-
- if (timeout == 0)
- return -ETIMEDOUT;
-
- return 0;
-}
-
static int bcm_sf2_sw_resume(struct dsa_switch *ds)
{
struct bcm_sf2_priv *priv = ds_to_priv(ds);
}
struct dsa_switch_driver mv88e6171_switch_driver = {
- .tag_protocol = DSA_TAG_PROTO_DSA,
+ .tag_protocol = DSA_TAG_PROTO_EDSA,
.priv_size = sizeof(struct mv88e6xxx_priv_state),
.probe = mv88e6171_probe,
.setup = mv88e6171_setup,
{
struct xgbe_prv_data *pdata = netdev_priv(netdev);
struct xgbe_hw_if *hw_if = &pdata->hw_if;
- unsigned int rxcsum, rxvlan, rxvlan_filter;
+ netdev_features_t rxcsum, rxvlan, rxvlan_filter;
rxcsum = pdata->netdev_features & NETIF_F_RXCSUM;
rxvlan = pdata->netdev_features & NETIF_F_HW_VLAN_CTAG_RX;
struct skb_shared_hwtstamps *hwtstamps;
unsigned int incomplete, error, context_next, context;
unsigned int len, put_len, max_len;
- int received = 0;
+ unsigned int received = 0;
+ int packet_count = 0;
DBGPR("-->xgbe_rx_poll: budget=%d\n", budget);
rdata = XGBE_GET_DESC_DATA(ring, ring->cur);
packet = &ring->packet_data;
- while (received < budget) {
+ while (packet_count < budget) {
DBGPR(" cur = %d\n", ring->cur);
/* First time in loop see if we need to restore state */
if (packet->errors)
DBGPR("Error in received packet\n");
dev_kfree_skb(skb);
- continue;
+ goto next_packet;
}
if (!context) {
}
dev_kfree_skb(skb);
- continue;
+ goto next_packet;
}
memcpy(skb_tail_pointer(skb), rdata->skb->data,
put_len);
/* Stray Context Descriptor? */
if (!skb)
- continue;
+ goto next_packet;
/* Be sure we don't exceed the configured MTU */
max_len = netdev->mtu + ETH_HLEN;
if (skb->len > max_len) {
DBGPR("packet length exceeds configured MTU\n");
dev_kfree_skb(skb);
- continue;
+ goto next_packet;
}
#ifdef XGMAC_ENABLE_RX_PKT_DUMP
netdev->last_rx = jiffies;
napi_gro_receive(&pdata->napi, skb);
+
+next_packet:
+ packet_count++;
}
/* Check if we need to save state before leaving */
rdata->state.error = error;
}
- DBGPR("<--xgbe_rx_poll: received = %d\n", received);
+ DBGPR("<--xgbe_rx_poll: packet_count = %d\n", packet_count);
- return received;
+ return packet_count;
}
static int xgbe_poll(struct napi_struct *napi, int budget)
xgene_enet_wr_mcx_mac(pdata, MAC_CONFIG_1_ADDR, data & ~TX_EN);
}
-static void xgene_enet_reset(struct xgene_enet_pdata *pdata)
+bool xgene_ring_mgr_init(struct xgene_enet_pdata *p)
+{
+ if (!ioread32(p->ring_csr_addr + CLKEN_ADDR))
+ return false;
+
+ if (ioread32(p->ring_csr_addr + SRST_ADDR))
+ return false;
+
+ return true;
+}
+
+static int xgene_enet_reset(struct xgene_enet_pdata *pdata)
{
u32 val;
+ if (!xgene_ring_mgr_init(pdata))
+ return -ENODEV;
+
clk_prepare_enable(pdata->clk);
clk_disable_unprepare(pdata->clk);
clk_prepare_enable(pdata->clk);
val |= SCAN_AUTO_INCR;
MGMT_CLOCK_SEL_SET(&val, 1);
xgene_enet_wr_mcx_mac(pdata, MII_MGMT_CONFIG_ADDR, val);
+
+ return 0;
}
static void xgene_gport_shutdown(struct xgene_enet_pdata *pdata)
#define BLOCK_ETH_MAC_OFFSET 0x0000
#define BLOCK_ETH_MAC_CSR_OFFSET 0x2800
+#define CLKEN_ADDR 0xc208
+#define SRST_ADDR 0xc200
+
#define MAC_ADDR_REG_OFFSET 0x00
#define MAC_COMMAND_REG_OFFSET 0x04
#define MAC_WRITE_REG_OFFSET 0x08
int xgene_enet_mdio_config(struct xgene_enet_pdata *pdata);
void xgene_enet_mdio_remove(struct xgene_enet_pdata *pdata);
+bool xgene_ring_mgr_init(struct xgene_enet_pdata *p);
extern struct xgene_mac_ops xgene_gmac_ops;
extern struct xgene_port_ops xgene_gport_ops;
struct device *dev = ndev_to_dev(ndev);
struct xgene_enet_desc_ring *rx_ring, *tx_ring, *cp_ring;
struct xgene_enet_desc_ring *buf_pool = NULL;
- u8 cpu_bufnum = 0, eth_bufnum = 0;
- u8 bp_bufnum = 0x20;
- u16 ring_id, ring_num = 0;
+ u8 cpu_bufnum = 0, eth_bufnum = START_ETH_BUFNUM;
+ u8 bp_bufnum = START_BP_BUFNUM;
+ u16 ring_id, ring_num = START_RING_NUM;
int ret;
/* allocate rx descriptor ring */
u16 dst_ring_num;
int ret;
- pdata->port_ops->reset(pdata);
+ ret = pdata->port_ops->reset(pdata);
+ if (ret)
+ return ret;
ret = xgene_enet_create_desc_rings(ndev);
if (ret) {
return ret;
err:
+ unregister_netdev(ndev);
free_netdev(ndev);
return ret;
}
#define SKB_BUFFER_SIZE (XGENE_ENET_MAX_MTU - NET_IP_ALIGN)
#define NUM_PKT_BUF 64
#define NUM_BUFPOOL 32
+#define START_ETH_BUFNUM 2
+#define START_BP_BUFNUM 0x22
+#define START_RING_NUM 8
#define PHY_POLL_LINK_ON (10 * HZ)
#define PHY_POLL_LINK_OFF (PHY_POLL_LINK_ON / 5)
};
struct xgene_port_ops {
- void (*reset)(struct xgene_enet_pdata *pdata);
+ int (*reset)(struct xgene_enet_pdata *pdata);
void (*cle_bypass)(struct xgene_enet_pdata *pdata,
u32 dst_ring_num, u16 bufpool_id);
void (*shutdown)(struct xgene_enet_pdata *pdata);
{
struct net_device *ndev = p->ndev;
u32 data;
- int i;
+ int i = 0;
xgene_enet_wr_diag_csr(p, ENET_CFG_MEM_RAM_SHUTDOWN_ADDR, 0);
- for (i = 0; i < 10 && data != ~0U ; i++) {
+ do {
usleep_range(100, 110);
data = xgene_enet_rd_diag_csr(p, ENET_BLOCK_MEM_RDY_ADDR);
- }
-
- if (data != ~0U) {
- netdev_err(ndev, "Failed to release memory from shutdown\n");
- return -ENODEV;
- }
+ if (data == ~0U)
+ return 0;
+ } while (++i < 10);
- return 0;
+ netdev_err(ndev, "Failed to release memory from shutdown\n");
+ return -ENODEV;
}
static void xgene_enet_config_ring_if_assoc(struct xgene_enet_pdata *p)
xgene_sgmac_rxtx(p, TX_EN, false);
}
-static void xgene_enet_reset(struct xgene_enet_pdata *p)
+static int xgene_enet_reset(struct xgene_enet_pdata *p)
{
+ if (!xgene_ring_mgr_init(p))
+ return -ENODEV;
+
clk_prepare_enable(p->clk);
clk_disable_unprepare(p->clk);
clk_prepare_enable(p->clk);
xgene_enet_ecc_init(p);
xgene_enet_config_ring_if_assoc(p);
+
+ return 0;
}
static void xgene_enet_cle_bypass(struct xgene_enet_pdata *p,
xgene_enet_wr_mac(pdata, AXGMAC_CONFIG_1, data & ~HSTTFEN);
}
-static void xgene_enet_reset(struct xgene_enet_pdata *pdata)
+static int xgene_enet_reset(struct xgene_enet_pdata *pdata)
{
+ if (!xgene_ring_mgr_init(pdata))
+ return -ENODEV;
+
clk_prepare_enable(pdata->clk);
clk_disable_unprepare(pdata->clk);
clk_prepare_enable(pdata->clk);
xgene_enet_ecc_init(pdata);
xgene_enet_config_ring_if_assoc(pdata);
+
+ return 0;
}
static void xgene_enet_xgcle_bypass(struct xgene_enet_pdata *pdata,
/* We just need one DMA descriptor which is DMA-able, since writing to
* the port will allocate a new descriptor in its internal linked-list
*/
- p = dma_zalloc_coherent(kdev, 1, &ring->desc_dma, GFP_KERNEL);
+ p = dma_zalloc_coherent(kdev, sizeof(struct dma_desc), &ring->desc_dma,
+ GFP_KERNEL);
if (!p) {
netif_err(priv, hw, priv->netdev, "DMA alloc failed\n");
return -ENOMEM;
if (!(reg & TDMA_DISABLED))
netdev_warn(priv->netdev, "TDMA not stopped!\n");
+ /* ring->cbs is the last part in bcm_sysport_init_tx_ring which could
+ * fail, so by checking this pointer we know whether the TX ring was
+ * fully initialized or not.
+ */
+ if (!ring->cbs)
+ return;
+
napi_disable(&ring->napi);
netif_napi_del(&ring->napi);
ring->cbs = NULL;
if (ring->desc_dma) {
- dma_free_coherent(kdev, 1, ring->desc_cpu, ring->desc_dma);
+ dma_free_coherent(kdev, sizeof(struct dma_desc),
+ ring->desc_cpu, ring->desc_dma);
ring->desc_dma = 0;
}
ring->size = 0;
/* Enable NAPI */
napi_enable(&priv->napi);
+ /* Enable RX interrupt and TX ring full interrupt */
+ intrl2_0_mask_clear(priv, INTRL2_0_RDMA_MBDONE | INTRL2_0_TX_RING_FULL);
+
phy_start(priv->phydev);
/* Enable TX interrupts for the 32 TXQs */
if (ret)
goto out_free_rx_ring;
- /* Enable RX interrupt and TX ring full interrupt */
- intrl2_0_mask_clear(priv, INTRL2_0_RDMA_MBDONE | INTRL2_0_TX_RING_FULL);
-
/* Turn on TDMA */
ret = tdma_enable_set(priv, 1);
if (ret)
if (!netif_running(dev))
return 0;
+ umac_reset(priv);
+
/* We may have been suspended and never received a WOL event that
* would turn off MPD detection, take care of that now
*/
netif_device_attach(dev);
- /* Enable RX interrupt and TX ring full interrupt */
- intrl2_0_mask_clear(priv, INTRL2_0_RDMA_MBDONE | INTRL2_0_TX_RING_FULL);
-
/* RX pipe enable */
topctrl_writel(priv, 0, RX_FLUSH_CNTL);
if (l5_cid >= MAX_CM_SK_TBL_SZ)
break;
- rcu_read_lock();
if (!rcu_access_pointer(cp->ulp_ops[CNIC_ULP_L4])) {
rc = -ENODEV;
- rcu_read_unlock();
break;
}
csk = &cp->csk_tbl[l5_cid];
}
}
csk_put(csk);
- rcu_read_unlock();
rc = 0;
}
}
cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
mutex_lock(&cnic_lock);
- if (rcu_dereference(cp->ulp_ops[ulp_type])) {
+ if (rcu_access_pointer(cp->ulp_ops[ulp_type])) {
RCU_INIT_POINTER(cp->ulp_ops[ulp_type], NULL);
cnic_put(dev);
} else {
goto err_irq0;
}
+ /* Re-configure the port multiplexer towards the PHY device */
+ bcmgenet_mii_config(priv->dev, false);
+
+ phy_connect_direct(dev, priv->phydev, bcmgenet_mii_setup,
+ priv->phy_interface);
+
bcmgenet_netif_start(dev);
return 0;
bcmgenet_netif_stop(dev);
+ /* Really kill the PHY state machine and disconnect from it */
+ phy_disconnect(priv->phydev);
+
/* Disable MAC receive */
umac_enable_set(priv, CMD_RX_EN, false);
phy_init_hw(priv->phydev);
/* Speed settings must be restored */
- bcmgenet_mii_config(priv->dev);
+ bcmgenet_mii_config(priv->dev, false);
/* disable ethernet MAC while updating its registers */
umac_enable_set(priv, CMD_TX_EN | CMD_RX_EN, false);
/* MDIO routines */
int bcmgenet_mii_init(struct net_device *dev);
-int bcmgenet_mii_config(struct net_device *dev);
+int bcmgenet_mii_config(struct net_device *dev, bool init);
void bcmgenet_mii_exit(struct net_device *dev);
void bcmgenet_mii_reset(struct net_device *dev);
+void bcmgenet_mii_setup(struct net_device *dev);
/* Wake-on-LAN routines */
void bcmgenet_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol);
/* setup netdev link state when PHY link status change and
* update UMAC and RGMII block when link up
*/
-static void bcmgenet_mii_setup(struct net_device *dev)
+void bcmgenet_mii_setup(struct net_device *dev)
{
struct bcmgenet_priv *priv = netdev_priv(dev);
struct phy_device *phydev = priv->phydev;
bcmgenet_sys_writel(priv, reg, SYS_PORT_CTRL);
}
-int bcmgenet_mii_config(struct net_device *dev)
+int bcmgenet_mii_config(struct net_device *dev, bool init)
{
struct bcmgenet_priv *priv = netdev_priv(dev);
struct phy_device *phydev = priv->phydev;
return -EINVAL;
}
- dev_info(kdev, "configuring instance for %s\n", phy_name);
+ if (init)
+ dev_info(kdev, "configuring instance for %s\n", phy_name);
return 0;
}
* PHY speed which is needed for bcmgenet_mii_config() to configure
* things appropriately.
*/
- ret = bcmgenet_mii_config(dev);
+ ret = bcmgenet_mii_config(dev, true);
if (ret) {
phy_disconnect(priv->phydev);
return ret;
if (tnapi->rx_rcb)
memset(tnapi->rx_rcb, 0, TG3_RX_RCB_RING_BYTES(tp));
- if (tg3_rx_prodring_alloc(tp, &tnapi->prodring)) {
+ if (tnapi->prodring.rx_std &&
+ tg3_rx_prodring_alloc(tp, &tnapi->prodring)) {
tg3_free_rings(tp);
return -ENOMEM;
}
config ARM_AT91_ETHER
tristate "AT91RM9200 Ethernet support"
- depends on HAS_DMA && (ARCH_AT91RM9200 || COMPILE_TEST)
+ depends on HAS_DMA && (ARCH_AT91 || COMPILE_TEST)
select MACB
---help---
If you wish to compile a kernel for the AT91RM9200 and enable
dcb->dcb_version = FW_PORT_DCB_VER_AUTO;
}
+static void cxgb4_dcb_cleanup_apps(struct net_device *dev)
+{
+ struct port_info *pi = netdev2pinfo(dev);
+ struct adapter *adap = pi->adapter;
+ struct port_dcb_info *dcb = &pi->dcb;
+ struct dcb_app app;
+ int i, err;
+
+ /* zero priority implies remove */
+ app.priority = 0;
+
+ for (i = 0; i < CXGB4_MAX_DCBX_APP_SUPPORTED; i++) {
+ /* Check if app list is exhausted */
+ if (!dcb->app_priority[i].protocolid)
+ break;
+
+ app.protocol = dcb->app_priority[i].protocolid;
+
+ if (dcb->dcb_version == FW_PORT_DCB_VER_IEEE) {
+ app.priority = dcb->app_priority[i].user_prio_map;
+ app.selector = dcb->app_priority[i].sel_field + 1;
+ err = dcb_ieee_delapp(dev, &app);
+ } else {
+ app.selector = !!(dcb->app_priority[i].sel_field);
+ err = dcb_setapp(dev, &app);
+ }
+
+ if (err) {
+ dev_err(adap->pdev_dev,
+ "Failed DCB Clear %s Application Priority: sel=%d, prot=%d, , err=%d\n",
+ dcb_ver_array[dcb->dcb_version], app.selector,
+ app.protocol, -err);
+ break;
+ }
+ }
+}
+
/* Finite State machine for Data Center Bridging.
*/
void cxgb4_dcb_state_fsm(struct net_device *dev,
/* we're going to use Host DCB */
dcb->state = CXGB4_DCB_STATE_HOST;
dcb->supported = CXGB4_DCBX_HOST_SUPPORT;
- dcb->enabled = 1;
break;
}
case CXGB4_DCB_INPUT_FW_ENABLED: {
/* we're going to use Firmware DCB */
dcb->state = CXGB4_DCB_STATE_FW_INCOMPLETE;
- dcb->supported = CXGB4_DCBX_FW_SUPPORT;
+ dcb->supported = DCB_CAP_DCBX_LLD_MANAGED;
+ if (dcb->dcb_version == FW_PORT_DCB_VER_IEEE)
+ dcb->supported |= DCB_CAP_DCBX_VER_IEEE;
+ else
+ dcb->supported |= DCB_CAP_DCBX_VER_CEE;
break;
}
* state. We need to reset back to a ground state
* of incomplete.
*/
+ cxgb4_dcb_cleanup_apps(dev);
cxgb4_dcb_state_init(dev);
dcb->state = CXGB4_DCB_STATE_FW_INCOMPLETE;
dcb->supported = CXGB4_DCBX_FW_SUPPORT;
{
struct port_info *pi = netdev2pinfo(dev);
+ /* If DCBx is host-managed, dcb is enabled by outside lldp agents */
+ if (pi->dcb.state == CXGB4_DCB_STATE_HOST) {
+ pi->dcb.enabled = enabled;
+ return 0;
+ }
+
/* Firmware doesn't provide any mechanism to control the DCB state.
*/
if (enabled != (pi->dcb.state == CXGB4_DCB_STATE_FW_ALLSYNCED))
*up_tc_map = (1 << tc);
/* prio_type is link strict */
- *prio_type = 0x2;
+ if (*pgid != 0xF)
+ *prio_type = 0x2;
}
static void cxgb4_getpgtccfg_tx(struct net_device *dev, int tc,
u8 *prio_type, u8 *pgid, u8 *bw_per,
u8 *up_tc_map)
{
- return cxgb4_getpgtccfg(dev, tc, prio_type, pgid, bw_per, up_tc_map, 1);
+ /* tc 0 is written at MSB position */
+ return cxgb4_getpgtccfg(dev, (7 - tc), prio_type, pgid, bw_per,
+ up_tc_map, 1);
}
u8 *prio_type, u8 *pgid, u8 *bw_per,
u8 *up_tc_map)
{
- return cxgb4_getpgtccfg(dev, tc, prio_type, pgid, bw_per, up_tc_map, 0);
+ /* tc 0 is written at MSB position */
+ return cxgb4_getpgtccfg(dev, (7 - tc), prio_type, pgid, bw_per,
+ up_tc_map, 0);
}
static void cxgb4_setpgtccfg_tx(struct net_device *dev, int tc,
struct fw_port_cmd pcmd;
struct port_info *pi = netdev2pinfo(dev);
struct adapter *adap = pi->adapter;
+ int fw_tc = 7 - tc;
u32 _pgid;
int err;
}
_pgid = be32_to_cpu(pcmd.u.dcb.pgid.pgid);
- _pgid &= ~(0xF << (tc * 4));
- _pgid |= pgid << (tc * 4);
+ _pgid &= ~(0xF << (fw_tc * 4));
+ _pgid |= pgid << (fw_tc * 4);
pcmd.u.dcb.pgid.pgid = cpu_to_be32(_pgid);
INIT_PORT_DCB_WRITE_CMD(pcmd, pi->port_id);
priority >= CXGB4_MAX_PRIORITY)
*pfccfg = 0;
else
- *pfccfg = (pi->dcb.pfcen >> priority) & 1;
+ *pfccfg = (pi->dcb.pfcen >> (7 - priority)) & 1;
}
/* Enable/disable Priority Pause Frames for the specified Traffic Class
pcmd.u.dcb.pfc.pfcen = pi->dcb.pfcen;
if (pfccfg)
- pcmd.u.dcb.pfc.pfcen |= (1 << priority);
+ pcmd.u.dcb.pfc.pfcen |= (1 << (7 - priority));
else
- pcmd.u.dcb.pfc.pfcen &= (~(1 << priority));
+ pcmd.u.dcb.pfc.pfcen &= (~(1 << (7 - priority)));
err = t4_wr_mbox(adap, adap->mbox, &pcmd, sizeof(pcmd), &pcmd);
if (err != FW_PORT_DCB_CFG_SUCCESS) {
/* Return whether IEEE Data Center Bridging has been negotiated.
*/
-static inline int cxgb4_ieee_negotiation_complete(struct net_device *dev)
+static inline int
+cxgb4_ieee_negotiation_complete(struct net_device *dev,
+ enum cxgb4_dcb_fw_msgs dcb_subtype)
{
struct port_info *pi = netdev2pinfo(dev);
struct port_dcb_info *dcb = &pi->dcb;
+ if (dcb_subtype && !(dcb->msgs & dcb_subtype))
+ return 0;
+
return (dcb->state == CXGB4_DCB_STATE_FW_ALLSYNCED &&
(dcb->supported & DCB_CAP_DCBX_VER_IEEE));
}
{
int prio;
- if (!cxgb4_ieee_negotiation_complete(dev))
+ if (!cxgb4_ieee_negotiation_complete(dev, CXGB4_DCB_FW_APP_ID))
return -EINVAL;
if (!(app->selector && app->protocol))
return -EINVAL;
{
int ret;
- if (!cxgb4_ieee_negotiation_complete(dev))
+ if (!cxgb4_ieee_negotiation_complete(dev, CXGB4_DCB_FW_APP_ID))
return -EINVAL;
if (!(app->selector && app->protocol))
return -EINVAL;
pgid = be32_to_cpu(pcmd.u.dcb.pgid.pgid);
for (i = 0; i < CXGB4_MAX_PRIORITY; i++)
- pg->prio_pg[i] = (pgid >> (i * 4)) & 0xF;
+ pg->prio_pg[7 - i] = (pgid >> (i * 4)) & 0xF;
INIT_PORT_DCB_READ_PEER_CMD(pcmd, pi->port_id);
pcmd.u.dcb.pgrate.type = FW_PORT_DCB_TYPE_PGRATE;
#ifdef CONFIG_CHELSIO_T4_DCB
struct port_info *pi = netdev_priv(dev);
- return pi->dcb.state == CXGB4_DCB_STATE_FW_ALLSYNCED;
+ if (!pi->dcb.enabled)
+ return 0;
+
+ return ((pi->dcb.state == CXGB4_DCB_STATE_FW_ALLSYNCED) ||
+ (pi->dcb.state == CXGB4_DCB_STATE_HOST));
#else
return 0;
#endif
SUPPORTED_10000baseKR_Full | SUPPORTED_1000baseKX_Full |
SUPPORTED_10000baseKX4_Full;
else if (type == FW_PORT_TYPE_FIBER_XFI ||
- type == FW_PORT_TYPE_FIBER_XAUI || type == FW_PORT_TYPE_SFP)
+ type == FW_PORT_TYPE_FIBER_XAUI || type == FW_PORT_TYPE_SFP) {
v |= SUPPORTED_FIBRE;
- else if (type == FW_PORT_TYPE_BP40_BA)
+ if (caps & FW_PORT_CAP_SPEED_1G)
+ v |= SUPPORTED_1000baseT_Full;
+ if (caps & FW_PORT_CAP_SPEED_10G)
+ v |= SUPPORTED_10000baseT_Full;
+ } else if (type == FW_PORT_TYPE_BP40_BA)
v |= SUPPORTED_40000baseSR4_Full;
if (caps & FW_PORT_CAP_ANEG)
spin_lock_init(&adapter->stats_lock);
spin_lock_init(&adapter->tid_release_lock);
+ spin_lock_init(&adapter->win0_lock);
INIT_WORK(&adapter->tid_release_task, process_tid_release_list);
INIT_WORK(&adapter->db_full_task, process_db_full);
int t4_sge_init(struct adapter *adap)
{
struct sge *s = &adap->sge;
- u32 sge_control, sge_conm_ctrl;
+ u32 sge_control, sge_control2, sge_conm_ctrl;
+ unsigned int ingpadboundary, ingpackboundary;
int ret, egress_threshold;
/*
sge_control = t4_read_reg(adap, SGE_CONTROL);
s->pktshift = PKTSHIFT_GET(sge_control);
s->stat_len = (sge_control & EGRSTATUSPAGESIZE_MASK) ? 128 : 64;
- s->fl_align = 1 << (INGPADBOUNDARY_GET(sge_control) +
- X_INGPADBOUNDARY_SHIFT);
+
+ /* T4 uses a single control field to specify both the PCIe Padding and
+ * Packing Boundary. T5 introduced the ability to specify these
+ * separately. The actual Ingress Packet Data alignment boundary
+ * within Packed Buffer Mode is the maximum of these two
+ * specifications.
+ */
+ ingpadboundary = 1 << (INGPADBOUNDARY_GET(sge_control) +
+ X_INGPADBOUNDARY_SHIFT);
+ if (is_t4(adap->params.chip)) {
+ s->fl_align = ingpadboundary;
+ } else {
+ /* T5 has a different interpretation of one of the PCIe Packing
+ * Boundary values.
+ */
+ sge_control2 = t4_read_reg(adap, SGE_CONTROL2_A);
+ ingpackboundary = INGPACKBOUNDARY_G(sge_control2);
+ if (ingpackboundary == INGPACKBOUNDARY_16B_X)
+ ingpackboundary = 16;
+ else
+ ingpackboundary = 1 << (ingpackboundary +
+ INGPACKBOUNDARY_SHIFT_X);
+
+ s->fl_align = max(ingpadboundary, ingpackboundary);
+ }
if (adap->flags & USING_SOFT_PARAMS)
ret = t4_sge_init_soft(adap);
HOSTPAGESIZEPF6(sge_hps) |
HOSTPAGESIZEPF7(sge_hps));
- t4_set_reg_field(adap, SGE_CONTROL,
- INGPADBOUNDARY_MASK |
- EGRSTATUSPAGESIZE_MASK,
- INGPADBOUNDARY(fl_align_log - 5) |
- EGRSTATUSPAGESIZE(stat_len != 64));
-
+ if (is_t4(adap->params.chip)) {
+ t4_set_reg_field(adap, SGE_CONTROL,
+ INGPADBOUNDARY_MASK |
+ EGRSTATUSPAGESIZE_MASK,
+ INGPADBOUNDARY(fl_align_log - 5) |
+ EGRSTATUSPAGESIZE(stat_len != 64));
+ } else {
+ /* T5 introduced the separation of the Free List Padding and
+ * Packing Boundaries. Thus, we can select a smaller Padding
+ * Boundary to avoid uselessly chewing up PCIe Link and Memory
+ * Bandwidth, and use a Packing Boundary which is large enough
+ * to avoid false sharing between CPUs, etc.
+ *
+ * For the PCI Link, the smaller the Padding Boundary the
+ * better. For the Memory Controller, a smaller Padding
+ * Boundary is better until we cross under the Memory Line
+ * Size (the minimum unit of transfer to/from Memory). If we
+ * have a Padding Boundary which is smaller than the Memory
+ * Line Size, that'll involve a Read-Modify-Write cycle on the
+ * Memory Controller which is never good. For T5 the smallest
+ * Padding Boundary which we can select is 32 bytes which is
+ * larger than any known Memory Controller Line Size so we'll
+ * use that.
+ *
+ * T5 has a different interpretation of the "0" value for the
+ * Packing Boundary. This corresponds to 16 bytes instead of
+ * the expected 32 bytes. We never have a Packing Boundary
+ * less than 32 bytes so we can't use that special value but
+ * on the other hand, if we wanted 32 bytes, the best we can
+ * really do is 64 bytes.
+ */
+ if (fl_align <= 32) {
+ fl_align = 64;
+ fl_align_log = 6;
+ }
+ t4_set_reg_field(adap, SGE_CONTROL,
+ INGPADBOUNDARY_MASK |
+ EGRSTATUSPAGESIZE_MASK,
+ INGPADBOUNDARY(INGPCIEBOUNDARY_32B_X) |
+ EGRSTATUSPAGESIZE(stat_len != 64));
+ t4_set_reg_field(adap, SGE_CONTROL2_A,
+ INGPACKBOUNDARY_V(INGPACKBOUNDARY_M),
+ INGPACKBOUNDARY_V(fl_align_log -
+ INGPACKBOUNDARY_SHIFT_X));
+ }
/*
* Adjust various SGE Free List Host Buffer Sizes.
*
#define X_INGPADBOUNDARY_SHIFT 5
#define SGE_CONTROL 0x1008
+#define SGE_CONTROL2_A 0x1124
#define DCASYSTYPE 0x00080000U
#define RXPKTCPLMODE_MASK 0x00040000U
#define RXPKTCPLMODE_SHIFT 18
#define PKTSHIFT_SHIFT 10
#define PKTSHIFT(x) ((x) << PKTSHIFT_SHIFT)
#define PKTSHIFT_GET(x) (((x) & PKTSHIFT_MASK) >> PKTSHIFT_SHIFT)
+#define INGPCIEBOUNDARY_32B_X 0
#define INGPCIEBOUNDARY_MASK 0x00000380U
#define INGPCIEBOUNDARY_SHIFT 7
#define INGPCIEBOUNDARY(x) ((x) << INGPCIEBOUNDARY_SHIFT)
#define INGPADBOUNDARY(x) ((x) << INGPADBOUNDARY_SHIFT)
#define INGPADBOUNDARY_GET(x) (((x) & INGPADBOUNDARY_MASK) \
>> INGPADBOUNDARY_SHIFT)
+#define INGPACKBOUNDARY_16B_X 0
+#define INGPACKBOUNDARY_SHIFT_X 5
+
+#define INGPACKBOUNDARY_S 16
+#define INGPACKBOUNDARY_M 0x7U
+#define INGPACKBOUNDARY_V(x) ((x) << INGPACKBOUNDARY_S)
+#define INGPACKBOUNDARY_G(x) (((x) >> INGPACKBOUNDARY_S) \
+ & INGPACKBOUNDARY_M)
#define EGRPCIEBOUNDARY_MASK 0x0000000eU
#define EGRPCIEBOUNDARY_SHIFT 1
#define EGRPCIEBOUNDARY(x) ((x) << EGRPCIEBOUNDARY_SHIFT)
u16 timer_val[SGE_NTIMERS]; /* interrupt holdoff timer array */
u8 counter_val[SGE_NCOUNTERS]; /* interrupt RX threshold array */
+ /* Decoded Adapter Parameters.
+ */
+ u32 fl_pg_order; /* large page allocation size */
+ u32 stat_len; /* length of status page at ring end */
+ u32 pktshift; /* padding between CPL & packet data */
+ u32 fl_align; /* response queue message alignment */
+ u32 fl_starve_thres; /* Free List starvation threshold */
+
/*
* Reverse maps from Absolute Queue IDs to associated queue pointers.
* The absolute Queue IDs are in a compact range which start at a
CH_DEVICE(0x480d), /* T480-cr */
CH_DEVICE(0x480e), /* T440-lp-cr */
CH_DEVICE(0x4880),
- CH_DEVICE(0x4880),
- CH_DEVICE(0x4880),
- CH_DEVICE(0x4880),
- CH_DEVICE(0x4880),
- CH_DEVICE(0x4880),
- CH_DEVICE(0x4880),
- CH_DEVICE(0x4880),
- CH_DEVICE(0x4880),
+ CH_DEVICE(0x4881),
+ CH_DEVICE(0x4882),
+ CH_DEVICE(0x4883),
+ CH_DEVICE(0x4884),
+ CH_DEVICE(0x4885),
+ CH_DEVICE(0x4886),
+ CH_DEVICE(0x4887),
+ CH_DEVICE(0x4888),
CH_DEVICE(0x5801), /* T520-cr */
CH_DEVICE(0x5802), /* T522-cr */
CH_DEVICE(0x5803), /* T540-cr */
#include "../cxgb4/t4fw_api.h"
#include "../cxgb4/t4_msg.h"
-/*
- * Decoded Adapter Parameters.
- */
-static u32 FL_PG_ORDER; /* large page allocation size */
-static u32 STAT_LEN; /* length of status page at ring end */
-static u32 PKTSHIFT; /* padding between CPL and packet data */
-static u32 FL_ALIGN; /* response queue message alignment */
-
/*
* Constants ...
*/
TX_QCHECK_PERIOD = (HZ / 2),
MAX_TIMER_TX_RECLAIM = 100,
- /*
- * An FL with <= FL_STARVE_THRES buffers is starving and a periodic
- * timer will attempt to refill it.
- */
- FL_STARVE_THRES = 4,
-
/*
* Suspend an Ethernet TX queue with fewer available descriptors than
* this. We always want to have room for a maximum sized packet:
/**
* fl_starving - return whether a Free List is starving.
+ * @adapter: pointer to the adapter
* @fl: the Free List
*
* Tests specified Free List to see whether the number of buffers
* available to the hardware has falled below our "starvation"
* threshold.
*/
-static inline bool fl_starving(const struct sge_fl *fl)
+static inline bool fl_starving(const struct adapter *adapter,
+ const struct sge_fl *fl)
{
- return fl->avail - fl->pend_cred <= FL_STARVE_THRES;
+ const struct sge *s = &adapter->sge;
+
+ return fl->avail - fl->pend_cred <= s->fl_starve_thres;
}
/**
/**
* get_buf_size - return the size of an RX Free List buffer.
+ * @adapter: pointer to the associated adapter
* @sdesc: pointer to the software buffer descriptor
*/
-static inline int get_buf_size(const struct rx_sw_desc *sdesc)
+static inline int get_buf_size(const struct adapter *adapter,
+ const struct rx_sw_desc *sdesc)
{
- return FL_PG_ORDER > 0 && (sdesc->dma_addr & RX_LARGE_BUF)
- ? (PAGE_SIZE << FL_PG_ORDER)
- : PAGE_SIZE;
+ const struct sge *s = &adapter->sge;
+
+ return (s->fl_pg_order > 0 && (sdesc->dma_addr & RX_LARGE_BUF)
+ ? (PAGE_SIZE << s->fl_pg_order) : PAGE_SIZE);
}
/**
if (is_buf_mapped(sdesc))
dma_unmap_page(adapter->pdev_dev, get_buf_addr(sdesc),
- get_buf_size(sdesc), PCI_DMA_FROMDEVICE);
+ get_buf_size(adapter, sdesc),
+ PCI_DMA_FROMDEVICE);
put_page(sdesc->page);
sdesc->page = NULL;
if (++fl->cidx == fl->size)
if (is_buf_mapped(sdesc))
dma_unmap_page(adapter->pdev_dev, get_buf_addr(sdesc),
- get_buf_size(sdesc), PCI_DMA_FROMDEVICE);
+ get_buf_size(adapter, sdesc),
+ PCI_DMA_FROMDEVICE);
sdesc->page = NULL;
if (++fl->cidx == fl->size)
fl->cidx = 0;
static unsigned int refill_fl(struct adapter *adapter, struct sge_fl *fl,
int n, gfp_t gfp)
{
+ struct sge *s = &adapter->sge;
struct page *page;
dma_addr_t dma_addr;
unsigned int cred = fl->avail;
* If we don't support large pages, drop directly into the small page
* allocation code.
*/
- if (FL_PG_ORDER == 0)
+ if (s->fl_pg_order == 0)
goto alloc_small_pages;
while (n) {
page = alloc_pages(gfp | __GFP_COMP | __GFP_NOWARN,
- FL_PG_ORDER);
+ s->fl_pg_order);
if (unlikely(!page)) {
/*
* We've failed inour attempt to allocate a "large
fl->large_alloc_failed++;
break;
}
- poison_buf(page, PAGE_SIZE << FL_PG_ORDER);
+ poison_buf(page, PAGE_SIZE << s->fl_pg_order);
dma_addr = dma_map_page(adapter->pdev_dev, page, 0,
- PAGE_SIZE << FL_PG_ORDER,
+ PAGE_SIZE << s->fl_pg_order,
PCI_DMA_FROMDEVICE);
if (unlikely(dma_mapping_error(adapter->pdev_dev, dma_addr))) {
/*
* because DMA mapping resources are typically
* critical resources once they become scarse.
*/
- __free_pages(page, FL_PG_ORDER);
+ __free_pages(page, s->fl_pg_order);
goto out;
}
dma_addr |= RX_LARGE_BUF;
fl->pend_cred += cred;
ring_fl_db(adapter, fl);
- if (unlikely(fl_starving(fl))) {
+ if (unlikely(fl_starving(adapter, fl))) {
smp_wmb();
set_bit(fl->cntxt_id, adapter->sge.starving_fl);
}
static void do_gro(struct sge_eth_rxq *rxq, const struct pkt_gl *gl,
const struct cpl_rx_pkt *pkt)
{
+ struct adapter *adapter = rxq->rspq.adapter;
+ struct sge *s = &adapter->sge;
int ret;
struct sk_buff *skb;
return;
}
- copy_frags(skb, gl, PKTSHIFT);
- skb->len = gl->tot_len - PKTSHIFT;
+ copy_frags(skb, gl, s->pktshift);
+ skb->len = gl->tot_len - s->pktshift;
skb->data_len = skb->len;
skb->truesize += skb->data_len;
skb->ip_summed = CHECKSUM_UNNECESSARY;
bool csum_ok = pkt->csum_calc && !pkt->err_vec &&
(rspq->netdev->features & NETIF_F_RXCSUM);
struct sge_eth_rxq *rxq = container_of(rspq, struct sge_eth_rxq, rspq);
+ struct adapter *adapter = rspq->adapter;
+ struct sge *s = &adapter->sge;
/*
* If this is a good TCP packet and we have Generic Receive Offload
rxq->stats.rx_drops++;
return 0;
}
- __skb_pull(skb, PKTSHIFT);
+ __skb_pull(skb, s->pktshift);
skb->protocol = eth_type_trans(skb, rspq->netdev);
skb_record_rx_queue(skb, rspq->idx);
rxq->stats.pkts++;
static int process_responses(struct sge_rspq *rspq, int budget)
{
struct sge_eth_rxq *rxq = container_of(rspq, struct sge_eth_rxq, rspq);
+ struct adapter *adapter = rspq->adapter;
+ struct sge *s = &adapter->sge;
int budget_left = budget;
while (likely(budget_left)) {
BUG_ON(frag >= MAX_SKB_FRAGS);
BUG_ON(rxq->fl.avail == 0);
sdesc = &rxq->fl.sdesc[rxq->fl.cidx];
- bufsz = get_buf_size(sdesc);
+ bufsz = get_buf_size(adapter, sdesc);
fp->page = sdesc->page;
fp->offset = rspq->offset;
fp->size = min(bufsz, len);
*/
ret = rspq->handler(rspq, rspq->cur_desc, &gl);
if (likely(ret == 0))
- rspq->offset += ALIGN(fp->size, FL_ALIGN);
+ rspq->offset += ALIGN(fp->size, s->fl_align);
else
restore_rx_bufs(&gl, &rxq->fl, frag);
} else if (likely(rsp_type == RSP_TYPE_CPL)) {
* schedule napi but the FL is no longer starving.
* No biggie.
*/
- if (fl_starving(fl)) {
+ if (fl_starving(adapter, fl)) {
struct sge_eth_rxq *rxq;
rxq = container_of(fl, struct sge_eth_rxq, fl);
int intr_dest,
struct sge_fl *fl, rspq_handler_t hnd)
{
+ struct sge *s = &adapter->sge;
struct port_info *pi = netdev_priv(dev);
struct fw_iq_cmd cmd, rpl;
int ret, iqandst, flsz = 0;
fl->size = roundup(fl->size, FL_PER_EQ_UNIT);
fl->desc = alloc_ring(adapter->pdev_dev, fl->size,
sizeof(__be64), sizeof(struct rx_sw_desc),
- &fl->addr, &fl->sdesc, STAT_LEN);
+ &fl->addr, &fl->sdesc, s->stat_len);
if (!fl->desc) {
ret = -ENOMEM;
goto err;
* free list ring) in Egress Queue Units.
*/
flsz = (fl->size / FL_PER_EQ_UNIT +
- STAT_LEN / EQ_UNIT);
+ s->stat_len / EQ_UNIT);
/*
* Fill in all the relevant firmware Ingress Queue Command
struct net_device *dev, struct netdev_queue *devq,
unsigned int iqid)
{
+ struct sge *s = &adapter->sge;
int ret, nentries;
struct fw_eq_eth_cmd cmd, rpl;
struct port_info *pi = netdev_priv(dev);
* Calculate the size of the hardware TX Queue (including the Status
* Page on the end of the TX Queue) in units of TX Descriptors.
*/
- nentries = txq->q.size + STAT_LEN / sizeof(struct tx_desc);
+ nentries = txq->q.size + s->stat_len / sizeof(struct tx_desc);
/*
* Allocate the hardware ring for the TX ring (with space for its
txq->q.desc = alloc_ring(adapter->pdev_dev, txq->q.size,
sizeof(struct tx_desc),
sizeof(struct tx_sw_desc),
- &txq->q.phys_addr, &txq->q.sdesc, STAT_LEN);
+ &txq->q.phys_addr, &txq->q.sdesc, s->stat_len);
if (!txq->q.desc)
return -ENOMEM;
*/
static void free_txq(struct adapter *adapter, struct sge_txq *tq)
{
+ struct sge *s = &adapter->sge;
+
dma_free_coherent(adapter->pdev_dev,
- tq->size * sizeof(*tq->desc) + STAT_LEN,
+ tq->size * sizeof(*tq->desc) + s->stat_len,
tq->desc, tq->phys_addr);
tq->cntxt_id = 0;
tq->sdesc = NULL;
static void free_rspq_fl(struct adapter *adapter, struct sge_rspq *rspq,
struct sge_fl *fl)
{
+ struct sge *s = &adapter->sge;
unsigned int flid = fl ? fl->cntxt_id : 0xffff;
t4vf_iq_free(adapter, FW_IQ_TYPE_FL_INT_CAP,
if (fl) {
free_rx_bufs(adapter, fl, fl->avail);
dma_free_coherent(adapter->pdev_dev,
- fl->size * sizeof(*fl->desc) + STAT_LEN,
+ fl->size * sizeof(*fl->desc) + s->stat_len,
fl->desc, fl->addr);
kfree(fl->sdesc);
fl->sdesc = NULL;
u32 fl0 = sge_params->sge_fl_buffer_size[0];
u32 fl1 = sge_params->sge_fl_buffer_size[1];
struct sge *s = &adapter->sge;
+ unsigned int ingpadboundary, ingpackboundary;
/*
* Start by vetting the basic SGE parameters which have been set up by
* Now translate the adapter parameters into our internal forms.
*/
if (fl1)
- FL_PG_ORDER = ilog2(fl1) - PAGE_SHIFT;
- STAT_LEN = ((sge_params->sge_control & EGRSTATUSPAGESIZE_MASK)
- ? 128 : 64);
- PKTSHIFT = PKTSHIFT_GET(sge_params->sge_control);
- FL_ALIGN = 1 << (INGPADBOUNDARY_GET(sge_params->sge_control) +
- SGE_INGPADBOUNDARY_SHIFT);
+ s->fl_pg_order = ilog2(fl1) - PAGE_SHIFT;
+ s->stat_len = ((sge_params->sge_control & EGRSTATUSPAGESIZE_MASK)
+ ? 128 : 64);
+ s->pktshift = PKTSHIFT_GET(sge_params->sge_control);
+
+ /* T4 uses a single control field to specify both the PCIe Padding and
+ * Packing Boundary. T5 introduced the ability to specify these
+ * separately. The actual Ingress Packet Data alignment boundary
+ * within Packed Buffer Mode is the maximum of these two
+ * specifications. (Note that it makes no real practical sense to
+ * have the Pading Boudary be larger than the Packing Boundary but you
+ * could set the chip up that way and, in fact, legacy T4 code would
+ * end doing this because it would initialize the Padding Boundary and
+ * leave the Packing Boundary initialized to 0 (16 bytes).)
+ */
+ ingpadboundary = 1 << (INGPADBOUNDARY_GET(sge_params->sge_control) +
+ X_INGPADBOUNDARY_SHIFT);
+ if (is_t4(adapter->params.chip)) {
+ s->fl_align = ingpadboundary;
+ } else {
+ /* T5 has a different interpretation of one of the PCIe Packing
+ * Boundary values.
+ */
+ ingpackboundary = INGPACKBOUNDARY_G(sge_params->sge_control2);
+ if (ingpackboundary == INGPACKBOUNDARY_16B_X)
+ ingpackboundary = 16;
+ else
+ ingpackboundary = 1 << (ingpackboundary +
+ INGPACKBOUNDARY_SHIFT_X);
+
+ s->fl_align = max(ingpadboundary, ingpackboundary);
+ }
+
+ /* A FL with <= fl_starve_thres buffers is starving and a periodic
+ * timer will attempt to refill it. This needs to be larger than the
+ * SGE's Egress Congestion Threshold. If it isn't, then we can get
+ * stuck waiting for new packets while the SGE is waiting for us to
+ * give it more Free List entries. (Note that the SGE's Egress
+ * Congestion Threshold is in units of 2 Free List pointers.)
+ */
+ s->fl_starve_thres
+ = EGRTHRESHOLD_GET(sge_params->sge_congestion_control)*2 + 1;
/*
* Set up tasklet timers.
*/
struct sge_params {
u32 sge_control; /* padding, boundaries, lengths, etc. */
+ u32 sge_control2; /* T5: more of the same */
u32 sge_host_page_size; /* RDMA page sizes */
u32 sge_queues_per_page; /* RDMA queues/page */
u32 sge_user_mode_limits; /* limits for BAR2 user mode accesses */
u32 sge_fl_buffer_size[16]; /* free list buffer sizes */
u32 sge_ingress_rx_threshold; /* RX counter interrupt threshold[4] */
+ u32 sge_congestion_control; /* congestion thresholds, etc. */
u32 sge_timer_value_0_and_1; /* interrupt coalescing timer values */
u32 sge_timer_value_2_and_3;
u32 sge_timer_value_4_and_5;
sge_params->sge_timer_value_2_and_3 = vals[5];
sge_params->sge_timer_value_4_and_5 = vals[6];
+ /* T4 uses a single control field to specify both the PCIe Padding and
+ * Packing Boundary. T5 introduced the ability to specify these
+ * separately with the Padding Boundary in SGE_CONTROL and and Packing
+ * Boundary in SGE_CONTROL2. So for T5 and later we need to grab
+ * SGE_CONTROL in order to determine how ingress packet data will be
+ * laid out in Packed Buffer Mode. Unfortunately, older versions of
+ * the firmware won't let us retrieve SGE_CONTROL2 so if we get a
+ * failure grabbing it we throw an error since we can't figure out the
+ * right value.
+ */
+ if (!is_t4(adapter->params.chip)) {
+ params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
+ FW_PARAMS_PARAM_XYZ(SGE_CONTROL2_A));
+ v = t4vf_query_params(adapter, 1, params, vals);
+ if (v != FW_SUCCESS) {
+ dev_err(adapter->pdev_dev,
+ "Unable to get SGE Control2; "
+ "probably old firmware.\n");
+ return v;
+ }
+ sge_params->sge_control2 = vals[0];
+ }
+
params[0] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
FW_PARAMS_PARAM_XYZ(SGE_INGRESS_RX_THRESHOLD));
- v = t4vf_query_params(adapter, 1, params, vals);
+ params[1] = (FW_PARAMS_MNEM(FW_PARAMS_MNEM_REG) |
+ FW_PARAMS_PARAM_XYZ(SGE_CONM_CTRL));
+ v = t4vf_query_params(adapter, 2, params, vals);
if (v)
return v;
sge_params->sge_ingress_rx_threshold = vals[0];
+ sge_params->sge_congestion_control = vals[1];
return 0;
}
int i;
enic_rfs_timer_stop(enic);
- spin_lock(&enic->rfs_h.lock);
+ spin_lock_bh(&enic->rfs_h.lock);
enic->rfs_h.free = 0;
for (i = 0; i < (1 << ENIC_RFS_FLW_BITSHIFT); i++) {
struct hlist_head *hhead;
kfree(n);
}
}
- spin_unlock(&enic->rfs_h.lock);
+ spin_unlock_bh(&enic->rfs_h.lock);
}
struct enic_rfs_fltr_node *htbl_fltr_search(struct enic *enic, u16 fltr_id)
bool res;
int j;
- spin_lock(&enic->rfs_h.lock);
+ spin_lock_bh(&enic->rfs_h.lock);
for (j = 0; j < ENIC_CLSF_EXPIRE_COUNT; j++) {
struct hlist_head *hhead;
struct hlist_node *tmp;
}
}
}
- spin_unlock(&enic->rfs_h.lock);
+ spin_unlock_bh(&enic->rfs_h.lock);
mod_timer(&enic->rfs_h.rfs_may_expire, jiffies + HZ/4);
}
return -EPROTONOSUPPORT;
tbl_idx = skb_get_hash_raw(skb) & ENIC_RFS_FLW_MASK;
- spin_lock(&enic->rfs_h.lock);
+ spin_lock_bh(&enic->rfs_h.lock);
n = htbl_key_search(&enic->rfs_h.ht_head[tbl_idx], &keys);
if (n) { /* entry already present */
}
ret_unlock:
- spin_unlock(&enic->rfs_h.lock);
+ spin_unlock_bh(&enic->rfs_h.lock);
return res;
}
struct vnic_rq_buf *buf = rq->to_use;
if (buf->os_buf) {
- buf = buf->next;
- rq->to_use = buf;
- rq->ring.desc_avail--;
- if ((buf->index & VNIC_RQ_RETURN_RATE) == 0) {
- /* Adding write memory barrier prevents compiler and/or
- * CPU reordering, thus avoiding descriptor posting
- * before descriptor is initialized. Otherwise, hardware
- * can read stale descriptor fields.
- */
- wmb();
- iowrite32(buf->index, &rq->ctrl->posted_index);
- }
+ enic_queue_rq_desc(rq, buf->os_buf, os_buf_index, buf->dma_addr,
+ buf->len);
return 0;
}
enic->rq_truncated_pkts++;
}
+ pci_unmap_single(enic->pdev, buf->dma_addr, buf->len,
+ PCI_DMA_FROMDEVICE);
dev_kfree_skb_any(skb);
+ buf->os_buf = NULL;
return;
}
/* Buffer overflow
*/
+ pci_unmap_single(enic->pdev, buf->dma_addr, buf->len,
+ PCI_DMA_FROMDEVICE);
dev_kfree_skb_any(skb);
+ buf->os_buf = NULL;
}
}
enic_dev_disable(enic);
- local_bh_disable();
for (i = 0; i < enic->rq_count; i++) {
napi_disable(&enic->napi[i]);
+ local_bh_disable();
while (!enic_poll_lock_napi(&enic->rq[i]))
mdelay(1);
+ local_bh_enable();
}
- local_bh_enable();
netif_carrier_off(netdev);
netif_tx_disable(netdev);
return -EOPNOTSUPP;
br_spec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC);
+ if (!br_spec)
+ return -EINVAL;
nla_for_each_nested(attr, br_spec, rem) {
if (nla_type(attr) != IFLA_BRIDGE_MODE)
continue;
+ if (nla_len(attr) < sizeof(mode))
+ return -EINVAL;
+
mode = nla_get_u16(attr);
if (mode != BRIDGE_MODE_VEPA && mode != BRIDGE_MODE_VEB)
return -EINVAL;
"Disabled VxLAN offloads for UDP port %d\n",
be16_to_cpu(port));
}
+
+static bool be_gso_check(struct sk_buff *skb, struct net_device *dev)
+{
+ return vxlan_gso_check(skb);
+}
#endif
static const struct net_device_ops be_netdev_ops = {
#ifdef CONFIG_BE2NET_VXLAN
.ndo_add_vxlan_port = be_add_vxlan_port,
.ndo_del_vxlan_port = be_del_vxlan_port,
+ .ndo_gso_check = be_gso_check,
#endif
};
return bufaddr;
}
+static void swap_buffer2(void *dst_buf, void *src_buf, int len)
+{
+ int i;
+ unsigned int *src = src_buf;
+ unsigned int *dst = dst_buf;
+
+ for (i = 0; i < len; i += 4, src++, dst++)
+ *dst = swab32p(src);
+}
+
static void fec_dump(struct net_device *ndev)
{
struct fec_enet_private *fep = netdev_priv(ndev);
}
static bool fec_enet_copybreak(struct net_device *ndev, struct sk_buff **skb,
- struct bufdesc *bdp, u32 length)
+ struct bufdesc *bdp, u32 length, bool swap)
{
struct fec_enet_private *fep = netdev_priv(ndev);
struct sk_buff *new_skb;
dma_sync_single_for_cpu(&fep->pdev->dev, bdp->cbd_bufaddr,
FEC_ENET_RX_FRSIZE - fep->rx_align,
DMA_FROM_DEVICE);
- memcpy(new_skb->data, (*skb)->data, length);
+ if (!swap)
+ memcpy(new_skb->data, (*skb)->data, length);
+ else
+ swap_buffer2(new_skb->data, (*skb)->data, length);
*skb = new_skb;
return true;
u16 vlan_tag;
int index = 0;
bool is_copybreak;
+ bool need_swap = id_entry->driver_data & FEC_QUIRK_SWAP_FRAME;
#ifdef CONFIG_M532x
flush_cache_all();
* include that when passing upstream as it messes up
* bridging applications.
*/
- is_copybreak = fec_enet_copybreak(ndev, &skb, bdp, pkt_len - 4);
+ is_copybreak = fec_enet_copybreak(ndev, &skb, bdp, pkt_len - 4,
+ need_swap);
if (!is_copybreak) {
skb_new = netdev_alloc_skb(ndev, FEC_ENET_RX_FRSIZE);
if (unlikely(!skb_new)) {
prefetch(skb->data - NET_IP_ALIGN);
skb_put(skb, pkt_len - 4);
data = skb->data;
- if (id_entry->driver_data & FEC_QUIRK_SWAP_FRAME)
+ if (!is_copybreak && need_swap)
swap_buffer(data, pkt_len);
/* Extract the enhanced buffer descriptor */
complete(&fep->mdio_done);
}
- fec_ptp_check_pps_event(fep);
+ if (fep->ptp_clock)
+ fec_ptp_check_pps_event(fep);
return ret;
}
netif_device_detach(ndev);
netif_tx_unlock_bh(ndev);
fec_stop(ndev);
+ fec_enet_clk_enable(ndev, false);
+ pinctrl_pm_select_sleep_state(&fep->pdev->dev);
}
rtnl_unlock();
- fec_enet_clk_enable(ndev, false);
- pinctrl_pm_select_sleep_state(&fep->pdev->dev);
-
if (fep->reg_phy)
regulator_disable(fep->reg_phy);
return ret;
}
- pinctrl_pm_select_default_state(&fep->pdev->dev);
- ret = fec_enet_clk_enable(ndev, true);
- if (ret)
- goto failed_clk;
-
rtnl_lock();
if (netif_running(ndev)) {
+ pinctrl_pm_select_default_state(&fep->pdev->dev);
+ ret = fec_enet_clk_enable(ndev, true);
+ if (ret) {
+ rtnl_unlock();
+ goto failed_clk;
+ }
fec_restart(ndev);
netif_tx_lock_bh(ndev);
netif_device_attach(ndev);
FC(fecp, x_cntrl, FEC_TCNTRL_FDEN); /* FD disable */
}
+ /* Restore multicast and promiscuous settings */
+ set_multicast_list(dev);
+
/*
* Enable interrupts we wish to service.
*/
if (fep->phydev->duplex)
S16(sccp, scc_psmr, SCC_PSMR_LPB | SCC_PSMR_FDE);
+ /* Restore multicast and promiscuous settings */
+ set_multicast_list(dev);
+
S32(sccp, scc_gsmrl, SCC_GSMRL_ENR | SCC_GSMRL_ENT);
}
NETIF_F_HW_CSUM |
NETIF_F_SG);
- netdev->priv_flags |= IFF_UNICAST_FLT;
+ /* Do not set IFF_UNICAST_FLT for VMWare's 82545EM */
+ if (hw->device_id != E1000_DEV_ID_82545EM_COPPER ||
+ hw->subsystem_vendor_id != PCI_VENDOR_ID_VMWARE)
+ netdev->priv_flags |= IFF_UNICAST_FLT;
adapter->en_mng_pt = e1000_enable_mng_pass_thru(hw);
I40E_GL_MDET_TX_PF_NUM_SHIFT;
u8 vf_num = (reg & I40E_GL_MDET_TX_VF_NUM_MASK) >>
I40E_GL_MDET_TX_VF_NUM_SHIFT;
- u8 event = (reg & I40E_GL_MDET_TX_EVENT_SHIFT) >>
+ u8 event = (reg & I40E_GL_MDET_TX_EVENT_MASK) >>
I40E_GL_MDET_TX_EVENT_SHIFT;
u8 queue = (reg & I40E_GL_MDET_TX_QUEUE_MASK) >>
I40E_GL_MDET_TX_QUEUE_SHIFT;
if (reg & I40E_GL_MDET_RX_VALID_MASK) {
u8 func = (reg & I40E_GL_MDET_RX_FUNCTION_MASK) >>
I40E_GL_MDET_RX_FUNCTION_SHIFT;
- u8 event = (reg & I40E_GL_MDET_RX_EVENT_SHIFT) >>
+ u8 event = (reg & I40E_GL_MDET_RX_EVENT_MASK) >>
I40E_GL_MDET_RX_EVENT_SHIFT;
u8 queue = (reg & I40E_GL_MDET_RX_QUEUE_MASK) >>
I40E_GL_MDET_RX_QUEUE_SHIFT;
/* igb_get_stats64() might access the rings on this vector,
* we must wait a grace period before freeing it.
*/
- kfree_rcu(q_vector, rcu);
+ if (q_vector)
+ kfree_rcu(q_vector, rcu);
}
/**
adapter->flags &= ~IGB_FLAG_NEED_LINK_UPDATE;
for (i = 0; i < adapter->num_q_vectors; i++) {
- napi_synchronize(&(adapter->q_vector[i]->napi));
- napi_disable(&(adapter->q_vector[i]->napi));
+ if (adapter->q_vector[i]) {
+ napi_synchronize(&adapter->q_vector[i]->napi);
+ napi_disable(&adapter->q_vector[i]->napi);
+ }
}
int i;
for (i = 0; i < adapter->num_tx_queues; i++)
- igb_free_tx_resources(adapter->tx_ring[i]);
+ if (adapter->tx_ring[i])
+ igb_free_tx_resources(adapter->tx_ring[i]);
}
void igb_unmap_and_free_tx_resource(struct igb_ring *ring,
int i;
for (i = 0; i < adapter->num_tx_queues; i++)
- igb_clean_tx_ring(adapter->tx_ring[i]);
+ if (adapter->tx_ring[i])
+ igb_clean_tx_ring(adapter->tx_ring[i]);
}
/**
int i;
for (i = 0; i < adapter->num_rx_queues; i++)
- igb_free_rx_resources(adapter->rx_ring[i]);
+ if (adapter->rx_ring[i])
+ igb_free_rx_resources(adapter->rx_ring[i]);
}
/**
int i;
for (i = 0; i < adapter->num_rx_queues; i++)
- igb_clean_rx_ring(adapter->rx_ring[i]);
+ if (adapter->rx_ring[i])
+ igb_clean_rx_ring(adapter->rx_ring[i]);
}
/**
if (unlikely(page_to_nid(page) != numa_node_id()))
return false;
+ if (unlikely(page->pfmemalloc))
+ return false;
+
#if (PAGE_SIZE < 8192)
/* if we are only owner of page we can reuse it */
if (unlikely(page_count(page) != 1))
memcpy(__skb_put(skb, size), va, ALIGN(size, sizeof(long)));
/* we can reuse buffer as-is, just make sure it is local */
- if (likely(page_to_nid(page) == numa_node_id()))
+ if (likely((page_to_nid(page) == numa_node_id()) &&
+ !page->pfmemalloc))
return true;
/* this page cannot be reused so discard it */
pci_restore_state(pdev);
pci_save_state(pdev);
+ if (!pci_device_is_present(pdev))
+ return -ENODEV;
err = pci_enable_device_mem(pdev);
if (err) {
dev_err(&pdev->dev,
if (old == advertised)
return err;
/* this sets the link speed and restarts auto-neg */
+ while (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
+ usleep_range(1000, 2000);
+
hw->mac.autotry_restart = true;
err = hw->mac.ops.setup_link(hw, advertised, true);
if (err) {
e_info(probe, "setup link failed with code %d\n", err);
hw->mac.ops.setup_link(hw, old, true);
}
+ clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state);
} else {
/* in this case we currently only support 10Gb/FULL */
u32 speed = ethtool_cmd_speed(ecmd);
* if SR-IOV and VMDQ are disabled - otherwise ensure
* that hardware VLAN filters remain enabled.
*/
- if (!(adapter->flags & (IXGBE_FLAG_VMDQ_ENABLED |
- IXGBE_FLAG_SRIOV_ENABLED)))
+ if (adapter->flags & (IXGBE_FLAG_VMDQ_ENABLED |
+ IXGBE_FLAG_SRIOV_ENABLED))
vlnctrl |= (IXGBE_VLNCTRL_VFE | IXGBE_VLNCTRL_CFIEN);
} else {
if (netdev->flags & IFF_ALLMULTI) {
IXGBE_CB(skb)->page_released = false;
}
dev_kfree_skb(skb);
+ rx_buffer->skb = NULL;
}
- rx_buffer->skb = NULL;
if (rx_buffer->dma)
dma_unmap_page(dev, rx_buffer->dma,
ixgbe_rx_pg_size(rx_ring),
return -EOPNOTSUPP;
br_spec = nlmsg_find_attr(nlh, sizeof(struct ifinfomsg), IFLA_AF_SPEC);
+ if (!br_spec)
+ return -EINVAL;
nla_for_each_nested(attr, br_spec, rem) {
__u16 mode;
if (nla_type(attr) != IFLA_BRIDGE_MODE)
continue;
+ if (nla_len(attr) < sizeof(mode))
+ return -EINVAL;
+
mode = nla_get_u16(attr);
if (mode == BRIDGE_MODE_VEPA) {
reg = 0;
int i, err, pci_using_dac, expected_gts;
unsigned int indices = MAX_TX_QUEUES;
u8 part_str[IXGBE_PBANUM_LENGTH];
+ bool disable_dev = false;
#ifdef IXGBE_FCOE
u16 device_caps;
#endif
iounmap(adapter->io_addr);
kfree(adapter->mac_table);
err_ioremap:
+ disable_dev = !test_and_set_bit(__IXGBE_DISABLED, &adapter->state);
free_netdev(netdev);
err_alloc_etherdev:
pci_release_selected_regions(pdev,
pci_select_bars(pdev, IORESOURCE_MEM));
err_pci_reg:
err_dma:
- if (!adapter || !test_and_set_bit(__IXGBE_DISABLED, &adapter->state))
+ if (!adapter || disable_dev)
pci_disable_device(pdev);
return err;
}
{
struct ixgbe_adapter *adapter = pci_get_drvdata(pdev);
struct net_device *netdev = adapter->netdev;
+ bool disable_dev;
ixgbe_dbg_adapter_exit(adapter);
e_dev_info("complete\n");
kfree(adapter->mac_table);
+ disable_dev = !test_and_set_bit(__IXGBE_DISABLED, &adapter->state);
free_netdev(netdev);
pci_disable_pcie_error_reporting(pdev);
- if (!test_and_set_bit(__IXGBE_DISABLED, &adapter->state))
+ if (disable_dev)
pci_disable_device(pdev);
}
**/
s32 ixgbe_setup_phy_link_tnx(struct ixgbe_hw *hw)
{
- s32 status;
u16 autoneg_reg = IXGBE_MII_AUTONEG_REG;
bool autoneg = false;
ixgbe_link_speed speed;
hw->phy.ops.write_reg(hw, MDIO_CTRL1,
MDIO_MMD_AN, autoneg_reg);
-
- return status;
+ return 0;
}
/**
int tx_index;
struct tx_desc *desc;
u32 cmd_sts;
- struct sk_buff *skb;
tx_index = txq->tx_used_desc;
desc = &txq->tx_desc_area[tx_index];
reclaimed++;
txq->tx_desc_count--;
- skb = NULL;
- if (cmd_sts & TX_LAST_DESC)
- skb = __skb_dequeue(&txq->tx_skb);
+ if (!IS_TSO_HEADER(txq, desc->buf_ptr))
+ dma_unmap_single(mp->dev->dev.parent, desc->buf_ptr,
+ desc->byte_cnt, DMA_TO_DEVICE);
+
+ if (cmd_sts & TX_ENABLE_INTERRUPT) {
+ struct sk_buff *skb = __skb_dequeue(&txq->tx_skb);
+
+ if (!WARN_ON(!skb))
+ dev_kfree_skb(skb);
+ }
if (cmd_sts & ERROR_SUMMARY) {
netdev_info(mp->dev, "tx error\n");
mp->dev->stats.tx_errors++;
}
- if (!IS_TSO_HEADER(txq, desc->buf_ptr))
- dma_unmap_single(mp->dev->dev.parent, desc->buf_ptr,
- desc->byte_cnt, DMA_TO_DEVICE);
- dev_kfree_skb(skb);
}
__netif_tx_unlock_bh(nq);
{
struct mvpp2_prs_entry *pe;
int tid_aux, tid;
+ int ret = 0;
pe = mvpp2_prs_vlan_find(priv, tpid, ai);
break;
}
- if (tid <= tid_aux)
- return -EINVAL;
+ if (tid <= tid_aux) {
+ ret = -EINVAL;
+ goto error;
+ }
memset(pe, 0 , sizeof(struct mvpp2_prs_entry));
mvpp2_prs_tcam_lu_set(pe, MVPP2_PRS_LU_VLAN);
mvpp2_prs_hw_write(priv, pe);
+error:
kfree(pe);
- return 0;
+ return ret;
}
/* Get first free double vlan ai number */
unsigned int port_map)
{
struct mvpp2_prs_entry *pe;
- int tid_aux, tid, ai;
+ int tid_aux, tid, ai, ret = 0;
pe = mvpp2_prs_double_vlan_find(priv, tpid1, tpid2);
/* Set ai value for new double vlan entry */
ai = mvpp2_prs_double_vlan_ai_free_get(priv);
- if (ai < 0)
- return ai;
+ if (ai < 0) {
+ ret = ai;
+ goto error;
+ }
/* Get first single/triple vlan tid */
for (tid_aux = MVPP2_PE_FIRST_FREE_TID;
break;
}
- if (tid >= tid_aux)
- return -ERANGE;
+ if (tid >= tid_aux) {
+ ret = -ERANGE;
+ goto error;
+ }
memset(pe, 0, sizeof(struct mvpp2_prs_entry));
mvpp2_prs_tcam_lu_set(pe, MVPP2_PRS_LU_VLAN);
mvpp2_prs_tcam_port_map_set(pe, port_map);
mvpp2_prs_hw_write(priv, pe);
+error:
kfree(pe);
- return 0;
+ return ret;
}
/* IPv4 header parsing for fragmentation and L4 offset */
mlx4_set_stats_bitmap(mdev->dev, &priv->stats_bitmap);
#ifdef CONFIG_MLX4_EN_VXLAN
- if (priv->mdev->dev->caps.flags2 & MLX4_DEV_CAP_FLAG2_VXLAN_OFFLOADS)
+ if (priv->mdev->dev->caps.tunnel_offload_mode == MLX4_TUNNEL_OFFLOAD_MODE_VXLAN)
vxlan_get_rx_port(dev);
#endif
priv->port_up = true;
ret = mlx4_SET_PORT_VXLAN(priv->mdev->dev, priv->port,
VXLAN_STEER_BY_OUTER_MAC, 1);
out:
- if (ret)
+ if (ret) {
en_err(priv, "failed setting L2 tunnel configuration ret %d\n", ret);
+ return;
+ }
+
+ /* set offloads */
+ priv->dev->hw_enc_features |= NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
+ NETIF_F_TSO | NETIF_F_GSO_UDP_TUNNEL;
+ priv->dev->hw_features |= NETIF_F_GSO_UDP_TUNNEL;
+ priv->dev->features |= NETIF_F_GSO_UDP_TUNNEL;
}
static void mlx4_en_del_vxlan_offloads(struct work_struct *work)
int ret;
struct mlx4_en_priv *priv = container_of(work, struct mlx4_en_priv,
vxlan_del_task);
+ /* unset offloads */
+ priv->dev->hw_enc_features &= ~(NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
+ NETIF_F_TSO | NETIF_F_GSO_UDP_TUNNEL);
+ priv->dev->hw_features &= ~NETIF_F_GSO_UDP_TUNNEL;
+ priv->dev->features &= ~NETIF_F_GSO_UDP_TUNNEL;
ret = mlx4_SET_PORT_VXLAN(priv->mdev->dev, priv->port,
VXLAN_STEER_BY_OUTER_MAC, 0);
queue_work(priv->mdev->workqueue, &priv->vxlan_del_task);
}
+
+static bool mlx4_en_gso_check(struct sk_buff *skb, struct net_device *dev)
+{
+ return vxlan_gso_check(skb);
+}
#endif
static const struct net_device_ops mlx4_netdev_ops = {
#ifdef CONFIG_MLX4_EN_VXLAN
.ndo_add_vxlan_port = mlx4_en_add_vxlan_port,
.ndo_del_vxlan_port = mlx4_en_del_vxlan_port,
+ .ndo_gso_check = mlx4_en_gso_check,
#endif
};
.ndo_rx_flow_steer = mlx4_en_filter_rfs,
#endif
.ndo_get_phys_port_id = mlx4_en_get_phys_port_id,
+#ifdef CONFIG_MLX4_EN_VXLAN
+ .ndo_add_vxlan_port = mlx4_en_add_vxlan_port,
+ .ndo_del_vxlan_port = mlx4_en_del_vxlan_port,
+ .ndo_gso_check = mlx4_en_gso_check,
+#endif
};
int mlx4_en_init_netdev(struct mlx4_en_dev *mdev, int port,
if (mdev->dev->caps.steering_mode != MLX4_STEERING_MODE_A0)
dev->priv_flags |= IFF_UNICAST_FLT;
- if (mdev->dev->caps.tunnel_offload_mode == MLX4_TUNNEL_OFFLOAD_MODE_VXLAN) {
- dev->hw_enc_features |= NETIF_F_IP_CSUM | NETIF_F_RXCSUM |
- NETIF_F_TSO | NETIF_F_GSO_UDP_TUNNEL;
- dev->hw_features |= NETIF_F_GSO_UDP_TUNNEL;
- dev->features |= NETIF_F_GSO_UDP_TUNNEL;
- }
-
mdev->pndev[port] = dev;
netif_carrier_off(dev);
* whether LSO is used */
tx_desc->ctrl.srcrb_flags = priv->ctrl_flags;
if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) {
- tx_desc->ctrl.srcrb_flags |= cpu_to_be32(MLX4_WQE_CTRL_IP_CSUM |
- MLX4_WQE_CTRL_TCP_UDP_CSUM);
+ if (!skb->encapsulation)
+ tx_desc->ctrl.srcrb_flags |= cpu_to_be32(MLX4_WQE_CTRL_IP_CSUM |
+ MLX4_WQE_CTRL_TCP_UDP_CSUM);
+ else
+ tx_desc->ctrl.srcrb_flags |= cpu_to_be32(MLX4_WQE_CTRL_IP_CSUM);
ring->tx_csum++;
}
pr_cont("\n");
}
}
+ synchronize_irq(eq->irq);
mlx4_mtt_cleanup(dev, &eq->mtt);
for (i = 0; i < npages; ++i)
cur->ib.dst_gid_msk);
break;
+ case MLX4_NET_TRANS_RULE_ID_VXLAN:
+ len += snprintf(buf + len, BUF_SIZE - len,
+ "VNID = %d ", be32_to_cpu(cur->vxlan.vni));
+ break;
case MLX4_NET_TRANS_RULE_ID_IPV6:
break;
switch (op) {
case RES_OP_RESERVE:
- count = get_param_l(&in_param);
+ count = get_param_l(&in_param) & 0xffffff;
align = get_param_h(&in_param);
err = mlx4_grant_resource(dev, slave, RES_QP, count, 0);
if (err)
snprintf(eq->name, MLX5_MAX_EQ_NAME, "%s@pci:%s",
name, pci_name(dev->pdev));
eq->eqn = out.eq_number;
+ eq->irqn = vecidx;
+ eq->dev = dev;
+ eq->doorbell = uar->map + MLX5_EQ_DOORBEL_OFFSET;
err = request_irq(table->msix_arr[vecidx].vector, mlx5_msix_handler, 0,
eq->name, eq);
if (err)
goto err_eq;
- eq->irqn = vecidx;
- eq->dev = dev;
- eq->doorbell = uar->map + MLX5_EQ_DOORBEL_OFFSET;
-
err = mlx5_debug_eq_add(dev, eq);
if (err)
goto err_irq;
if (err)
mlx5_core_warn(dev, "failed to destroy a previously created eq: eqn %d\n",
eq->eqn);
+ synchronize_irq(table->msix_arr[eq->irqn].vector);
mlx5_buf_free(dev, &eq->buf);
return err;
dev->profile = &profile[prof_sel];
dev->event = mlx5_core_event;
+ INIT_LIST_HEAD(&priv->ctx_list);
+ spin_lock_init(&priv->ctx_lock);
err = mlx5_dev_init(dev, pdev);
if (err) {
dev_err(&pdev->dev, "mlx5_dev_init failed %d\n", err);
goto out;
}
- INIT_LIST_HEAD(&priv->ctx_list);
- spin_lock_init(&priv->ctx_lock);
err = mlx5_register_device(dev);
if (err) {
dev_err(&pdev->dev, "mlx5_register_device failed %d\n", err);
if (test_bit(__NX_RESETTING, &adapter->state))
goto reschedule;
- if (test_bit(__NX_DEV_UP, &adapter->state)) {
+ if (test_bit(__NX_DEV_UP, &adapter->state) &&
+ !(adapter->capabilities & NX_FW_CAPABILITY_LINK_NOTIFICATION)) {
if (!adapter->has_link_events) {
netxen_nic_handle_phy_intr(adapter);
adapter->flags |= QLCNIC_DEL_VXLAN_PORT;
}
+
+static bool qlcnic_gso_check(struct sk_buff *skb, struct net_device *dev)
+{
+ return vxlan_gso_check(skb);
+}
#endif
static const struct net_device_ops qlcnic_netdev_ops = {
#ifdef CONFIG_QLCNIC_VXLAN
.ndo_add_vxlan_port = qlcnic_add_vxlan_port,
.ndo_del_vxlan_port = qlcnic_del_vxlan_port,
+ .ndo_gso_check = qlcnic_gso_check,
#endif
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = qlcnic_poll_controller,
config NET_VENDOR_QUALCOMM
bool "Qualcomm devices"
default y
- depends on SPI_MASTER && OF_GPIO
---help---
If you have a network (Ethernet) card belonging to this class, say Y
and read the Ethernet-HOWTO, available from
config QCA7000
tristate "Qualcomm Atheros QCA7000 support"
- depends on SPI_MASTER && OF_GPIO
+ depends on SPI_MASTER && OF
---help---
This SPI protocol driver supports the Qualcomm Atheros QCA7000.
return ret;
}
-#if defined(CONFIG_CPU_SH4) || defined(CONFIG_ARCH_SHMOBILE)
static void sh_eth_set_receive_align(struct sk_buff *skb)
{
- int reserve;
+ uintptr_t reserve = (uintptr_t)skb->data & (SH_ETH_RX_ALIGN - 1);
- reserve = SH4_SKB_RX_ALIGN - ((u32)skb->data & (SH4_SKB_RX_ALIGN - 1));
if (reserve)
- skb_reserve(skb, reserve);
+ skb_reserve(skb, SH_ETH_RX_ALIGN - reserve);
}
-#else
-static void sh_eth_set_receive_align(struct sk_buff *skb)
-{
- skb_reserve(skb, SH2_SH3_SKB_RX_ALIGN);
-}
-#endif
/* CPU <-> EDMAC endian convert */
struct sh_eth_txdesc *txdesc = NULL;
int rx_ringsize = sizeof(*rxdesc) * mdp->num_rx_ring;
int tx_ringsize = sizeof(*txdesc) * mdp->num_tx_ring;
+ int skbuff_size = mdp->rx_buf_sz + SH_ETH_RX_ALIGN - 1;
mdp->cur_rx = 0;
mdp->cur_tx = 0;
for (i = 0; i < mdp->num_rx_ring; i++) {
/* skb */
mdp->rx_skbuff[i] = NULL;
- skb = netdev_alloc_skb(ndev, mdp->rx_buf_sz);
+ skb = netdev_alloc_skb(ndev, skbuff_size);
mdp->rx_skbuff[i] = skb;
if (skb == NULL)
break;
- dma_map_single(&ndev->dev, skb->data, mdp->rx_buf_sz,
- DMA_FROM_DEVICE);
sh_eth_set_receive_align(skb);
/* RX descriptor */
rxdesc = &mdp->rx_ring[i];
+ /* The size of the buffer is a multiple of 16 bytes. */
+ rxdesc->buffer_length = ALIGN(mdp->rx_buf_sz, 16);
+ dma_map_single(&ndev->dev, skb->data, rxdesc->buffer_length,
+ DMA_FROM_DEVICE);
rxdesc->addr = virt_to_phys(PTR_ALIGN(skb->data, 4));
rxdesc->status = cpu_to_edmac(mdp, RD_RACT | RD_RFP);
- /* The size of the buffer is 16 byte boundary. */
- rxdesc->buffer_length = ALIGN(mdp->rx_buf_sz, 16);
/* Rx descriptor address set */
if (i == 0) {
sh_eth_write(ndev, mdp->rx_desc_dma, RDLAR);
struct sk_buff *skb;
u16 pkt_len = 0;
u32 desc_status;
+ int skbuff_size = mdp->rx_buf_sz + SH_ETH_RX_ALIGN - 1;
rxdesc = &mdp->rx_ring[entry];
while (!(rxdesc->status & cpu_to_edmac(mdp, RD_RACT))) {
if (mdp->cd->rpadir)
skb_reserve(skb, NET_IP_ALIGN);
dma_sync_single_for_cpu(&ndev->dev, rxdesc->addr,
- mdp->rx_buf_sz,
+ ALIGN(mdp->rx_buf_sz, 16),
DMA_FROM_DEVICE);
skb_put(skb, pkt_len);
skb->protocol = eth_type_trans(skb, ndev);
rxdesc->buffer_length = ALIGN(mdp->rx_buf_sz, 16);
if (mdp->rx_skbuff[entry] == NULL) {
- skb = netdev_alloc_skb(ndev, mdp->rx_buf_sz);
+ skb = netdev_alloc_skb(ndev, skbuff_size);
mdp->rx_skbuff[entry] = skb;
if (skb == NULL)
break; /* Better luck next round. */
- dma_map_single(&ndev->dev, skb->data, mdp->rx_buf_sz,
- DMA_FROM_DEVICE);
sh_eth_set_receive_align(skb);
+ dma_map_single(&ndev->dev, skb->data,
+ rxdesc->buffer_length, DMA_FROM_DEVICE);
skb_checksum_none_assert(skb);
rxdesc->addr = virt_to_phys(PTR_ALIGN(skb->data, 4));
if (ret)
goto out_free_irq;
+ mdp->is_opened = 1;
+
return ret;
out_free_irq:
return NETDEV_TX_OK;
}
+static struct net_device_stats *sh_eth_get_stats(struct net_device *ndev)
+{
+ struct sh_eth_private *mdp = netdev_priv(ndev);
+
+ if (sh_eth_is_rz_fast_ether(mdp))
+ return &ndev->stats;
+
+ if (!mdp->is_opened)
+ return &ndev->stats;
+
+ ndev->stats.tx_dropped += sh_eth_read(ndev, TROCR);
+ sh_eth_write(ndev, 0, TROCR); /* (write clear) */
+ ndev->stats.collisions += sh_eth_read(ndev, CDCR);
+ sh_eth_write(ndev, 0, CDCR); /* (write clear) */
+ ndev->stats.tx_carrier_errors += sh_eth_read(ndev, LCCR);
+ sh_eth_write(ndev, 0, LCCR); /* (write clear) */
+
+ if (sh_eth_is_gether(mdp)) {
+ ndev->stats.tx_carrier_errors += sh_eth_read(ndev, CERCR);
+ sh_eth_write(ndev, 0, CERCR); /* (write clear) */
+ ndev->stats.tx_carrier_errors += sh_eth_read(ndev, CEECR);
+ sh_eth_write(ndev, 0, CEECR); /* (write clear) */
+ } else {
+ ndev->stats.tx_carrier_errors += sh_eth_read(ndev, CNDCR);
+ sh_eth_write(ndev, 0, CNDCR); /* (write clear) */
+ }
+
+ return &ndev->stats;
+}
+
/* device close function */
static int sh_eth_close(struct net_device *ndev)
{
sh_eth_write(ndev, 0, EDTRR);
sh_eth_write(ndev, 0, EDRRR);
+ sh_eth_get_stats(ndev);
/* PHY Disconnect */
if (mdp->phydev) {
phy_stop(mdp->phydev);
pm_runtime_put_sync(&mdp->pdev->dev);
- return 0;
-}
-
-static struct net_device_stats *sh_eth_get_stats(struct net_device *ndev)
-{
- struct sh_eth_private *mdp = netdev_priv(ndev);
-
- if (sh_eth_is_rz_fast_ether(mdp))
- return &ndev->stats;
+ mdp->is_opened = 0;
- pm_runtime_get_sync(&mdp->pdev->dev);
-
- ndev->stats.tx_dropped += sh_eth_read(ndev, TROCR);
- sh_eth_write(ndev, 0, TROCR); /* (write clear) */
- ndev->stats.collisions += sh_eth_read(ndev, CDCR);
- sh_eth_write(ndev, 0, CDCR); /* (write clear) */
- ndev->stats.tx_carrier_errors += sh_eth_read(ndev, LCCR);
- sh_eth_write(ndev, 0, LCCR); /* (write clear) */
- if (sh_eth_is_gether(mdp)) {
- ndev->stats.tx_carrier_errors += sh_eth_read(ndev, CERCR);
- sh_eth_write(ndev, 0, CERCR); /* (write clear) */
- ndev->stats.tx_carrier_errors += sh_eth_read(ndev, CEECR);
- sh_eth_write(ndev, 0, CEECR); /* (write clear) */
- } else {
- ndev->stats.tx_carrier_errors += sh_eth_read(ndev, CNDCR);
- sh_eth_write(ndev, 0, CNDCR); /* (write clear) */
- }
- pm_runtime_put_sync(&mdp->pdev->dev);
-
- return &ndev->stats;
+ return 0;
}
/* ioctl to device function */
/* Driver's parameters */
#if defined(CONFIG_CPU_SH4) || defined(CONFIG_ARCH_SHMOBILE)
-#define SH4_SKB_RX_ALIGN 32
+#define SH_ETH_RX_ALIGN 32
#else
-#define SH2_SH3_SKB_RX_ALIGN 2
+#define SH_ETH_RX_ALIGN 2
#endif
/* Register's bits
unsigned no_ether_link:1;
unsigned ether_link_active_low:1;
+ unsigned is_opened:1;
};
static inline void sh_eth_soft_swap(char *src, int len)
EFX_MAX_CHANNELS,
resource_size(&efx->pci_dev->resource[EFX_MEM_BAR]) /
(EFX_VI_PAGE_SIZE * EFX_TXQ_TYPES));
- BUG_ON(efx->max_channels == 0);
+ if (WARN_ON(efx->max_channels == 0))
+ return -EIO;
nic_data = kzalloc(sizeof(*nic_data), GFP_KERNEL);
if (!nic_data)
unsigned short dma_flags;
int i = 0;
- EFX_BUG_ON_PARANOID(tx_queue->write_count > tx_queue->insert_count);
-
if (skb_shinfo(skb)->gso_size)
return efx_enqueue_skb_tso(tx_queue, skb);
/* Find the packet protocol and sanity-check it */
state.protocol = efx_tso_check_protocol(skb);
- EFX_BUG_ON_PARANOID(tx_queue->write_count > tx_queue->insert_count);
-
rc = tso_start(&state, efx, skb);
if (rc)
goto mem_err;
#include <linux/workqueue.h>
#include <linux/of.h>
#include <linux/of_device.h>
+#include <linux/of_gpio.h>
#include <linux/netdevice.h>
#include <linux/etherdevice.h>
{},
};
MODULE_DEVICE_TABLE(of, smc91x_match);
+
+/**
+ * of_try_set_control_gpio - configure a gpio if it exists
+ */
+static int try_toggle_control_gpio(struct device *dev,
+ struct gpio_desc **desc,
+ const char *name, int index,
+ int value, unsigned int nsdelay)
+{
+ struct gpio_desc *gpio = *desc;
+ int res;
+
+ gpio = devm_gpiod_get_index(dev, name, index);
+ if (IS_ERR(gpio)) {
+ if (PTR_ERR(gpio) == -ENOENT) {
+ *desc = NULL;
+ return 0;
+ }
+
+ return PTR_ERR(gpio);
+ }
+ res = gpiod_direction_output(gpio, !value);
+ if (res) {
+ dev_err(dev, "unable to toggle gpio %s: %i\n", name, res);
+ devm_gpiod_put(dev, gpio);
+ gpio = NULL;
+ return res;
+ }
+ if (nsdelay)
+ usleep_range(nsdelay, 2 * nsdelay);
+ gpiod_set_value_cansleep(gpio, value);
+ *desc = gpio;
+
+ return 0;
+}
#endif
/*
const struct of_device_id *match = NULL;
struct smc_local *lp;
struct net_device *ndev;
- struct resource *res, *ires;
+ struct resource *res;
unsigned int __iomem *addr;
unsigned long irq_flags = SMC_IRQ_FLAGS;
+ unsigned long irq_resflags;
int ret;
ndev = alloc_etherdev(sizeof(struct smc_local));
struct device_node *np = pdev->dev.of_node;
u32 val;
+ /* Optional pwrdwn GPIO configured? */
+ ret = try_toggle_control_gpio(&pdev->dev, &lp->power_gpio,
+ "power", 0, 0, 100);
+ if (ret)
+ return ret;
+
+ /*
+ * Optional reset GPIO configured? Minimum 100 ns reset needed
+ * according to LAN91C96 datasheet page 14.
+ */
+ ret = try_toggle_control_gpio(&pdev->dev, &lp->reset_gpio,
+ "reset", 0, 0, 100);
+ if (ret)
+ return ret;
+
+ /*
+ * Need to wait for optional EEPROM to load, max 750 us according
+ * to LAN91C96 datasheet page 55.
+ */
+ if (lp->reset_gpio)
+ usleep_range(750, 1000);
+
/* Combination of IO widths supported, default to 16-bit */
if (!of_property_read_u32(np, "reg-io-width", &val)) {
if (val & 1)
goto out_free_netdev;
}
- ires = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
- if (!ires) {
+ ndev->irq = platform_get_irq(pdev, 0);
+ if (ndev->irq <= 0) {
ret = -ENODEV;
goto out_release_io;
}
-
- ndev->irq = ires->start;
-
- if (irq_flags == -1 || ires->flags & IRQF_TRIGGER_MASK)
- irq_flags = ires->flags & IRQF_TRIGGER_MASK;
+ /*
+ * If this platform does not specify any special irqflags, or if
+ * the resource supplies a trigger, override the irqflags with
+ * the trigger flags from the resource.
+ */
+ irq_resflags = irqd_get_trigger_type(irq_get_irq_data(ndev->irq));
+ if (irq_flags == -1 || irq_resflags & IRQF_TRIGGER_MASK)
+ irq_flags = irq_resflags & IRQF_TRIGGER_MASK;
ret = smc_request_attrib(pdev, ndev);
if (ret)
struct sk_buff *pending_tx_skb;
struct tasklet_struct tx_task;
+ struct gpio_desc *power_gpio;
+ struct gpio_desc *reset_gpio;
+
/* version/revision of the SMC91x chip */
int version;
spin_unlock(&pdata->mac_lock);
}
+static int smsc911x_phy_general_power_up(struct smsc911x_data *pdata)
+{
+ int rc = 0;
+
+ if (!pdata->phy_dev)
+ return rc;
+
+ /* If the internal PHY is in General Power-Down mode, all, except the
+ * management interface, is powered-down and stays in that condition as
+ * long as Phy register bit 0.11 is HIGH.
+ *
+ * In that case, clear the bit 0.11, so the PHY powers up and we can
+ * access to the phy registers.
+ */
+ rc = phy_read(pdata->phy_dev, MII_BMCR);
+ if (rc < 0) {
+ SMSC_WARN(pdata, drv, "Failed reading PHY control reg");
+ return rc;
+ }
+
+ /* If the PHY general power-down bit is not set is not necessary to
+ * disable the general power down-mode.
+ */
+ if (rc & BMCR_PDOWN) {
+ rc = phy_write(pdata->phy_dev, MII_BMCR, rc & ~BMCR_PDOWN);
+ if (rc < 0) {
+ SMSC_WARN(pdata, drv, "Failed writing PHY control reg");
+ return rc;
+ }
+
+ usleep_range(1000, 1500);
+ }
+
+ return 0;
+}
+
static int smsc911x_phy_disable_energy_detect(struct smsc911x_data *pdata)
{
int rc = 0;
return rc;
}
- /*
- * If energy is detected the PHY is already awake so is not necessary
- * to disable the energy detect power-down mode.
- */
- if ((rc & MII_LAN83C185_EDPWRDOWN) &&
- !(rc & MII_LAN83C185_ENERGYON)) {
+ /* Only disable if energy detect mode is already enabled */
+ if (rc & MII_LAN83C185_EDPWRDOWN) {
/* Disable energy detect mode for this SMSC Transceivers */
rc = phy_write(pdata->phy_dev, MII_LAN83C185_CTRL_STATUS,
rc & (~MII_LAN83C185_EDPWRDOWN));
SMSC_WARN(pdata, drv, "Failed writing PHY control reg");
return rc;
}
-
- mdelay(1);
+ /* Allow PHY to wakeup */
+ mdelay(2);
}
return 0;
/* Only enable if energy detect mode is already disabled */
if (!(rc & MII_LAN83C185_EDPWRDOWN)) {
- mdelay(100);
/* Enable energy detect mode for this SMSC Transceivers */
rc = phy_write(pdata->phy_dev, MII_LAN83C185_CTRL_STATUS,
rc | MII_LAN83C185_EDPWRDOWN);
SMSC_WARN(pdata, drv, "Failed writing PHY control reg");
return rc;
}
-
- mdelay(1);
}
return 0;
}
unsigned int temp;
int ret;
+ /*
+ * Make sure to power-up the PHY chip before doing a reset, otherwise
+ * the reset fails.
+ */
+ ret = smsc911x_phy_general_power_up(pdata);
+ if (ret) {
+ SMSC_WARN(pdata, drv, "Failed to power-up the PHY chip");
+ return ret;
+ }
+
/*
* LAN9210/LAN9211/LAN9220/LAN9221 chips have an internal PHY that
* are initialized in a Energy Detect Power-Down mode that prevents
bool stmmac_eee_init(struct stmmac_priv *priv)
{
char *phy_bus_name = priv->plat->phy_bus_name;
+ unsigned long flags;
bool ret = false;
/* Using PCS we cannot dial with the phy registers at this stage
* changed).
* In that case the driver disable own timers.
*/
+ spin_lock_irqsave(&priv->lock, flags);
if (priv->eee_active) {
pr_debug("stmmac: disable EEE\n");
del_timer_sync(&priv->eee_ctrl_timer);
tx_lpi_timer);
}
priv->eee_active = 0;
+ spin_unlock_irqrestore(&priv->lock, flags);
goto out;
}
/* Activate the EEE and start timers */
+ spin_lock_irqsave(&priv->lock, flags);
if (!priv->eee_active) {
priv->eee_active = 1;
init_timer(&priv->eee_ctrl_timer);
/* Set HW EEE according to the speed */
priv->hw->mac->set_eee_pls(priv->hw, priv->phydev->link);
- pr_debug("stmmac: Energy-Efficient Ethernet initialized\n");
-
ret = true;
+ spin_unlock_irqrestore(&priv->lock, flags);
+
+ pr_debug("stmmac: Energy-Efficient Ethernet initialized\n");
}
out:
return ret;
if (new_state && netif_msg_link(priv))
phy_print_status(phydev);
+ spin_unlock_irqrestore(&priv->lock, flags);
+
/* At this stage, it could be needed to setup the EEE or adjust some
* MAC related HW registers.
*/
priv->eee_enabled = stmmac_eee_init(priv);
-
- spin_unlock_irqrestore(&priv->lock, flags);
}
/**
}
static int stmmac_init_rx_buffers(struct stmmac_priv *priv, struct dma_desc *p,
- int i)
+ int i, gfp_t flags)
{
struct sk_buff *skb;
skb = __netdev_alloc_skb(priv->dev, priv->dma_buf_sz + NET_IP_ALIGN,
- GFP_KERNEL);
+ flags);
if (!skb) {
pr_err("%s: Rx init fails; skb is NULL\n", __func__);
return -ENOMEM;
* and allocates the socket buffers. It suppors the chained and ring
* modes.
*/
-static int init_dma_desc_rings(struct net_device *dev)
+static int init_dma_desc_rings(struct net_device *dev, gfp_t flags)
{
int i;
struct stmmac_priv *priv = netdev_priv(dev);
else
p = priv->dma_rx + i;
- ret = stmmac_init_rx_buffers(priv, p, i);
+ ret = stmmac_init_rx_buffers(priv, p, i, flags);
if (ret)
goto err_init_rx_buffers;
struct stmmac_priv *priv = netdev_priv(dev);
int ret;
- ret = init_dma_desc_rings(dev);
- if (ret < 0) {
- pr_err("%s: DMA descriptors initialization failed\n", __func__);
- return ret;
- }
/* DMA initialization and SW reset */
ret = stmmac_init_dma_engine(priv);
if (ret < 0) {
}
priv->tx_lpi_timer = STMMAC_DEFAULT_TWT_LS;
- priv->eee_enabled = stmmac_eee_init(priv);
-
- stmmac_init_tx_coalesce(priv);
-
if ((priv->use_riwt) && (priv->hw->dma->rx_watchdog)) {
priv->rx_riwt = MAX_DMA_RIWT;
priv->hw->dma->rx_watchdog(priv->ioaddr, MAX_DMA_RIWT);
goto dma_desc_error;
}
+ ret = init_dma_desc_rings(dev, GFP_KERNEL);
+ if (ret < 0) {
+ pr_err("%s: DMA descriptors initialization failed\n", __func__);
+ goto init_error;
+ }
+
ret = stmmac_hw_setup(dev);
if (ret < 0) {
pr_err("%s: Hw setup failed\n", __func__);
goto init_error;
}
+ stmmac_init_tx_coalesce(priv);
+
if (priv->phydev)
phy_start(priv->phydev);
unsigned int nopaged_len = skb_headlen(skb);
unsigned int enh_desc = priv->plat->enh_desc;
+ spin_lock(&priv->tx_lock);
+
if (unlikely(stmmac_tx_avail(priv) < nfrags + 1)) {
+ spin_unlock(&priv->tx_lock);
if (!netif_queue_stopped(dev)) {
netif_stop_queue(dev);
/* This is a hard error, log it. */
return NETDEV_TX_BUSY;
}
- spin_lock(&priv->tx_lock);
-
if (priv->tx_path_in_lpi_mode)
stmmac_disable_eee_mode(priv);
return NETDEV_TX_OK;
dma_map_err:
+ spin_unlock(&priv->tx_lock);
dev_err(priv->device, "Tx dma map failed\n");
dev_kfree_skb(skb);
priv->dev->stats.tx_dropped++;
{
struct stmmac_priv *priv = netdev_priv(dev);
- spin_lock(&priv->lock);
priv->hw->mac->set_filter(priv->hw, dev);
- spin_unlock(&priv->lock);
}
/**
stmmac_set_mac(priv->ioaddr, false);
pinctrl_pm_select_sleep_state(priv->device);
/* Disable clock in case of PWM is off */
- clk_disable_unprepare(priv->stmmac_clk);
+ clk_disable(priv->stmmac_clk);
}
spin_unlock_irqrestore(&priv->lock, flags);
} else {
pinctrl_pm_select_default_state(priv->device);
/* enable the clk prevously disabled */
- clk_prepare_enable(priv->stmmac_clk);
+ clk_enable(priv->stmmac_clk);
/* reset the phy so that it's ready */
if (priv->mii)
stmmac_mdio_reset(priv->mii);
netif_device_attach(ndev);
+ init_dma_desc_rings(ndev, GFP_ATOMIC);
stmmac_hw_setup(ndev);
+ stmmac_init_tx_coalesce(priv);
napi_enable(&priv->napi);
static void stmmac_default_data(void)
{
memset(&plat_dat, 0, sizeof(struct plat_stmmacenet_data));
+
plat_dat.bus_id = 1;
plat_dat.phy_addr = 0;
plat_dat.interface = PHY_INTERFACE_MODE_GMII;
dma_cfg.pbl = 32;
dma_cfg.burst_len = DMA_AXI_BLEN_256;
plat_dat.dma_cfg = &dma_cfg;
+
+ /* Set default value for multicast hash bins */
+ plat_dat.multicast_filter_bins = HASH_TABLE_SIZE;
+
+ /* Set default value for unicast filter entries */
+ plat_dat.unicast_filter_entries = 1;
}
/**
*/
plat->maxmtu = JUMBO_LEN;
- /* Set default value for multicast hash bins */
- plat->multicast_filter_bins = HASH_TABLE_SIZE;
-
- /* Set default value for unicast filter entries */
- plat->unicast_filter_entries = 1;
-
/*
* Currently only the properties needed on SPEAr600
* are provided. All other properties should be added
return PTR_ERR(addr);
plat_dat = dev_get_platdata(&pdev->dev);
- if (pdev->dev.of_node) {
- if (!plat_dat)
- plat_dat = devm_kzalloc(&pdev->dev,
+
+ if (!plat_dat)
+ plat_dat = devm_kzalloc(&pdev->dev,
sizeof(struct plat_stmmacenet_data),
GFP_KERNEL);
- if (!plat_dat) {
- pr_err("%s: ERROR: no memory", __func__);
- return -ENOMEM;
- }
+ if (!plat_dat) {
+ pr_err("%s: ERROR: no memory", __func__);
+ return -ENOMEM;
+ }
+
+ /* Set default value for multicast hash bins */
+ plat_dat->multicast_filter_bins = HASH_TABLE_SIZE;
+ /* Set default value for unicast filter entries */
+ plat_dat->unicast_filter_entries = 1;
+
+ if (pdev->dev.of_node) {
ret = stmmac_probe_config_dt(pdev, plat_dat, &mac);
if (ret) {
pr_err("%s: main dt probe failed", __func__);
HMD(("init rxring, "));
for (i = 0; i < RX_RING_SIZE; i++) {
struct sk_buff *skb;
+ u32 mapping;
skb = happy_meal_alloc_skb(RX_BUF_ALLOC_SIZE, GFP_ATOMIC);
if (!skb) {
/* Because we reserve afterwards. */
skb_put(skb, (ETH_FRAME_LEN + RX_OFFSET + 4));
+ mapping = dma_map_single(hp->dma_dev, skb->data, RX_BUF_ALLOC_SIZE,
+ DMA_FROM_DEVICE);
+ if (dma_mapping_error(hp->dma_dev, mapping)) {
+ dev_kfree_skb_any(skb);
+ hme_write_rxd(hp, &hb->happy_meal_rxd[i], 0, 0);
+ continue;
+ }
hme_write_rxd(hp, &hb->happy_meal_rxd[i],
(RXFLAG_OWN | ((RX_BUF_ALLOC_SIZE - RX_OFFSET) << 16)),
- dma_map_single(hp->dma_dev, skb->data, RX_BUF_ALLOC_SIZE,
- DMA_FROM_DEVICE));
+ mapping);
skb_reserve(skb, RX_OFFSET);
}
skb = hp->rx_skbs[elem];
if (len > RX_COPY_THRESHOLD) {
struct sk_buff *new_skb;
+ u32 mapping;
/* Now refill the entry, if we can. */
new_skb = happy_meal_alloc_skb(RX_BUF_ALLOC_SIZE, GFP_ATOMIC);
drops++;
goto drop_it;
}
+ skb_put(new_skb, (ETH_FRAME_LEN + RX_OFFSET + 4));
+ mapping = dma_map_single(hp->dma_dev, new_skb->data,
+ RX_BUF_ALLOC_SIZE,
+ DMA_FROM_DEVICE);
+ if (unlikely(dma_mapping_error(hp->dma_dev, mapping))) {
+ dev_kfree_skb_any(new_skb);
+ drops++;
+ goto drop_it;
+ }
+
dma_unmap_single(hp->dma_dev, dma_addr, RX_BUF_ALLOC_SIZE, DMA_FROM_DEVICE);
hp->rx_skbs[elem] = new_skb;
- skb_put(new_skb, (ETH_FRAME_LEN + RX_OFFSET + 4));
hme_write_rxd(hp, this,
(RXFLAG_OWN|((RX_BUF_ALLOC_SIZE-RX_OFFSET)<<16)),
- dma_map_single(hp->dma_dev, new_skb->data, RX_BUF_ALLOC_SIZE,
- DMA_FROM_DEVICE));
+ mapping);
skb_reserve(new_skb, RX_OFFSET);
/* Trim the original skb for the netif. */
netif_wake_queue(dev);
}
+static void unmap_partial_tx_skb(struct happy_meal *hp, u32 first_mapping,
+ u32 first_len, u32 first_entry, u32 entry)
+{
+ struct happy_meal_txd *txbase = &hp->happy_block->happy_meal_txd[0];
+
+ dma_unmap_single(hp->dma_dev, first_mapping, first_len, DMA_TO_DEVICE);
+
+ first_entry = NEXT_TX(first_entry);
+ while (first_entry != entry) {
+ struct happy_meal_txd *this = &txbase[first_entry];
+ u32 addr, len;
+
+ addr = hme_read_desc32(hp, &this->tx_addr);
+ len = hme_read_desc32(hp, &this->tx_flags);
+ len &= TXFLAG_SIZE;
+ dma_unmap_page(hp->dma_dev, addr, len, DMA_TO_DEVICE);
+ }
+}
+
static netdev_tx_t happy_meal_start_xmit(struct sk_buff *skb,
struct net_device *dev)
{
len = skb->len;
mapping = dma_map_single(hp->dma_dev, skb->data, len, DMA_TO_DEVICE);
+ if (unlikely(dma_mapping_error(hp->dma_dev, mapping)))
+ goto out_dma_error;
tx_flags |= (TXFLAG_SOP | TXFLAG_EOP);
hme_write_txd(hp, &hp->happy_block->happy_meal_txd[entry],
(tx_flags | (len & TXFLAG_SIZE)),
first_len = skb_headlen(skb);
first_mapping = dma_map_single(hp->dma_dev, skb->data, first_len,
DMA_TO_DEVICE);
+ if (unlikely(dma_mapping_error(hp->dma_dev, first_mapping)))
+ goto out_dma_error;
entry = NEXT_TX(entry);
for (frag = 0; frag < skb_shinfo(skb)->nr_frags; frag++) {
len = skb_frag_size(this_frag);
mapping = skb_frag_dma_map(hp->dma_dev, this_frag,
0, len, DMA_TO_DEVICE);
+ if (unlikely(dma_mapping_error(hp->dma_dev, mapping))) {
+ unmap_partial_tx_skb(hp, first_mapping, first_len,
+ first_entry, entry);
+ goto out_dma_error;
+ }
this_txflags = tx_flags;
if (frag == skb_shinfo(skb)->nr_frags - 1)
this_txflags |= TXFLAG_EOP;
tx_add_log(hp, TXLOG_ACTION_TXMIT, 0);
return NETDEV_TX_OK;
+
+out_dma_error:
+ hp->tx_skbs[hp->tx_new] = NULL;
+ spin_unlock_irq(&hp->happy_lock);
+
+ dev_kfree_skb_any(skb);
+ dev->stats.tx_dropped++;
+ return NETDEV_TX_OK;
}
static struct net_device_stats *happy_meal_get_stats(struct net_device *dev)
#define CPSW_VLAN_AWARE BIT(1)
#define CPSW_ALE_VLAN_AWARE 1
-#define CPSW_FIFO_NORMAL_MODE (0 << 15)
-#define CPSW_FIFO_DUAL_MAC_MODE (1 << 15)
-#define CPSW_FIFO_RATE_LIMIT_MODE (2 << 15)
+#define CPSW_FIFO_NORMAL_MODE (0 << 16)
+#define CPSW_FIFO_DUAL_MAC_MODE (1 << 16)
+#define CPSW_FIFO_RATE_LIMIT_MODE (2 << 16)
#define CPSW_INTPACEEN (0x3f << 16)
#define CPSW_INTPRESCALE_MASK (0x7FF << 0)
if (enable) {
unsigned long timeout = jiffies + HZ;
- /* Disable Learn for all ports */
- for (i = 0; i < priv->data.slaves; i++) {
+ /* Disable Learn for all ports (host is port 0 and slaves are port 1 and up */
+ for (i = 0; i <= priv->data.slaves; i++) {
cpsw_ale_control_set(ale, i,
ALE_PORT_NOLEARN, 1);
cpsw_ale_control_set(ale, i,
cpsw_ale_control_set(ale, 0, ALE_P0_UNI_FLOOD, 1);
dev_dbg(&ndev->dev, "promiscuity enabled\n");
} else {
- /* Flood All Unicast Packets to Host port */
+ /* Don't Flood All Unicast Packets to Host port */
cpsw_ale_control_set(ale, 0, ALE_P0_UNI_FLOOD, 0);
- /* Enable Learn for all ports */
- for (i = 0; i < priv->data.slaves; i++) {
+ /* Enable Learn for all ports (host is port 0 and slaves are port 1 and up */
+ for (i = 0; i <= priv->data.slaves; i++) {
cpsw_ale_control_set(ale, i,
ALE_PORT_NOLEARN, 0);
cpsw_ale_control_set(ale, i,
if (ndev->flags & IFF_PROMISC) {
/* Enable promiscuous mode */
cpsw_set_promiscious(ndev, true);
+ cpsw_ale_set_allmulti(priv->ale, IFF_ALLMULTI);
return;
} else {
/* Disable promiscuous mode */
cpsw_set_promiscious(ndev, false);
}
+ /* Restore allmulti on vlans if necessary */
+ cpsw_ale_set_allmulti(priv->ale, priv->ndev->flags & IFF_ALLMULTI);
+
/* Clear all mcast from ALE */
cpsw_ale_flush_multicast(priv->ale, ALE_ALL_PORTS << priv->host_port);
const int port = priv->host_port;
u32 reg;
int i;
+ int unreg_mcast_mask;
reg = (priv->version == CPSW_VERSION_1) ? CPSW1_PORT_VLAN :
CPSW2_PORT_VLAN;
for (i = 0; i < priv->data.slaves; i++)
slave_write(priv->slaves + i, vlan, reg);
+ if (priv->ndev->flags & IFF_ALLMULTI)
+ unreg_mcast_mask = ALE_ALL_PORTS;
+ else
+ unreg_mcast_mask = ALE_PORT_1 | ALE_PORT_2;
+
cpsw_ale_add_vlan(priv->ale, vlan, ALE_ALL_PORTS << port,
ALE_ALL_PORTS << port, ALE_ALL_PORTS << port,
- (ALE_PORT_1 | ALE_PORT_2) << port);
+ unreg_mcast_mask << port);
}
static void cpsw_init_host_port(struct cpsw_priv *priv)
unsigned short vid)
{
int ret;
+ int unreg_mcast_mask;
+
+ if (priv->ndev->flags & IFF_ALLMULTI)
+ unreg_mcast_mask = ALE_ALL_PORTS;
+ else
+ unreg_mcast_mask = ALE_PORT_1 | ALE_PORT_2;
ret = cpsw_ale_add_vlan(priv->ale, vid,
ALE_ALL_PORTS << priv->host_port,
0, ALE_ALL_PORTS << priv->host_port,
- (ALE_PORT_1 | ALE_PORT_2) << priv->host_port);
+ unreg_mcast_mask << priv->host_port);
if (ret != 0)
return ret;
parp = of_get_property(slave_node, "phy_id", &lenp);
if ((parp == NULL) || (lenp != (sizeof(void *) * 2))) {
dev_err(&pdev->dev, "Missing slave[%d] phy_id property\n", i);
- return -EINVAL;
+ goto no_phy_slave;
}
mdio_node = of_find_node_by_phandle(be32_to_cpup(parp));
phyid = be32_to_cpup(parp+1);
snprintf(slave_data->phy_id, sizeof(slave_data->phy_id),
PHY_ID_FMT, mdio->name, phyid);
+ slave_data->phy_if = of_get_phy_mode(slave_node);
+ if (slave_data->phy_if < 0) {
+ dev_err(&pdev->dev, "Missing or malformed slave[%d] phy-mode property\n",
+ i);
+ return slave_data->phy_if;
+ }
+
+no_phy_slave:
mac_addr = of_get_mac_address(slave_node);
if (mac_addr) {
memcpy(slave_data->mac_addr, mac_addr, ETH_ALEN);
return ret;
}
}
-
- slave_data->phy_if = of_get_phy_mode(slave_node);
- if (slave_data->phy_if < 0) {
- dev_err(&pdev->dev, "Missing or malformed slave[%d] phy-mode property\n",
- i);
- return slave_data->phy_if;
- }
-
if (data->dual_emac) {
if (of_property_read_u32(slave_node, "dual_emac_res_vlan",
&prop)) {
return 0;
}
+void cpsw_ale_set_allmulti(struct cpsw_ale *ale, int allmulti)
+{
+ u32 ale_entry[ALE_ENTRY_WORDS];
+ int type, idx;
+ int unreg_mcast = 0;
+
+ /* Only bother doing the work if the setting is actually changing */
+ if (ale->allmulti == allmulti)
+ return;
+
+ /* Remember the new setting to check against next time */
+ ale->allmulti = allmulti;
+
+ for (idx = 0; idx < ale->params.ale_entries; idx++) {
+ cpsw_ale_read(ale, idx, ale_entry);
+ type = cpsw_ale_get_entry_type(ale_entry);
+ if (type != ALE_TYPE_VLAN)
+ continue;
+
+ unreg_mcast = cpsw_ale_get_vlan_unreg_mcast(ale_entry);
+ if (allmulti)
+ unreg_mcast |= 1;
+ else
+ unreg_mcast &= ~1;
+ cpsw_ale_set_vlan_unreg_mcast(ale_entry, unreg_mcast);
+ cpsw_ale_write(ale, idx, ale_entry);
+ }
+}
+
struct ale_control_info {
const char *name;
int offset, port_offset;
{
if (!ale)
return -EINVAL;
- cpsw_ale_stop(ale);
cpsw_ale_control_set(ale, 0, ALE_ENABLE, 0);
kfree(ale);
return 0;
struct cpsw_ale_params params;
struct timer_list timer;
unsigned long ageout;
+ int allmulti;
};
enum cpsw_ale_control {
int cpsw_ale_add_vlan(struct cpsw_ale *ale, u16 vid, int port, int untag,
int reg_mcast, int unreg_mcast);
int cpsw_ale_del_vlan(struct cpsw_ale *ale, u16 vid, int port);
+void cpsw_ale_set_allmulti(struct cpsw_ale *ale, int allmulti);
int cpsw_ale_control_get(struct cpsw_ale *ale, int port, int control);
int cpsw_ale_control_set(struct cpsw_ale *ale, int port,
switch (ptp_class & PTP_CLASS_PMASK) {
case PTP_CLASS_IPV4:
- offset += ETH_HLEN + IPV4_HLEN(data) + UDP_HLEN;
+ offset += ETH_HLEN + IPV4_HLEN(data + offset) + UDP_HLEN;
break;
case PTP_CLASS_IPV6:
offset += ETH_HLEN + IP6_HLEN + UDP_HLEN;
do_send:
/* Start filling in the page buffers with the rndis hdr */
rndis_msg->msg_len += rndis_msg_size;
+ packet->total_data_buflen = rndis_msg->msg_len;
packet->page_buf_cnt = init_page_array(rndis_msg, rndis_msg_size,
skb, &packet->page_buf[0]);
err = wpan_phy_register(phy);
if (err)
- goto out;
+ goto err_phy_reg;
err = register_netdev(dev);
- if (err < 0)
- goto out;
+ if (err)
+ goto err_netdev_reg;
dev_info(&pdev->dev, "Added ieee802154 HardMAC hardware\n");
return 0;
-out:
- unregister_netdev(dev);
+err_netdev_reg:
+ wpan_phy_unregister(phy);
+err_phy_reg:
+ free_netdev(dev);
+ wpan_phy_free(phy);
return err;
}
struct sk_buff *skb;
struct sk_buff_head list;
- skb_queue_head_init(&list);
+ __skb_queue_head_init(&list);
spin_lock_bh(&port->bc_queue.lock);
skb_queue_splice_tail_init(&port->bc_queue, &list);
{
struct macvlan_port *port = macvlan_port_get_rtnl(dev);
- cancel_work_sync(&port->bc_work);
dev->priv_flags &= ~IFF_MACVLAN_PORT;
netdev_rx_handler_unregister(dev);
+
+ /* After this point, no packet can schedule bc_work anymore,
+ * but we need to cancel it and purge left skbs if any.
+ */
+ cancel_work_sync(&port->bc_work);
+ __skb_queue_purge(&port->bc_queue);
+
kfree_rcu(port, rcu);
}
#include <linux/idr.h>
#include <linux/fs.h>
+#include <net/ipv6.h>
#include <net/net_namespace.h>
#include <net/rtnetlink.h>
#include <net/sock.h>
static const struct proto_ops macvtap_socket_ops;
#define TUN_OFFLOADS (NETIF_F_HW_CSUM | NETIF_F_TSO_ECN | NETIF_F_TSO | \
- NETIF_F_TSO6 | NETIF_F_UFO)
+ NETIF_F_TSO6)
#define RX_OFFLOADS (NETIF_F_GRO | NETIF_F_LRO)
#define TAP_FEATURES (NETIF_F_GSO | NETIF_F_SG)
gso_type = SKB_GSO_TCPV6;
break;
case VIRTIO_NET_HDR_GSO_UDP:
+ pr_warn_once("macvtap: %s: using disabled UFO feature; please fix this program\n",
+ current->comm);
gso_type = SKB_GSO_UDP;
+ if (skb->protocol == htons(ETH_P_IPV6))
+ ipv6_proxy_select_ident(skb);
break;
default:
return -EINVAL;
vnet_hdr->gso_type = VIRTIO_NET_HDR_GSO_TCPV4;
else if (sinfo->gso_type & SKB_GSO_TCPV6)
vnet_hdr->gso_type = VIRTIO_NET_HDR_GSO_TCPV6;
- else if (sinfo->gso_type & SKB_GSO_UDP)
- vnet_hdr->gso_type = VIRTIO_NET_HDR_GSO_UDP;
else
BUG();
if (sinfo->gso_type & SKB_GSO_TCP_ECN)
if (skb->ip_summed == CHECKSUM_PARTIAL) {
vnet_hdr->flags = VIRTIO_NET_HDR_F_NEEDS_CSUM;
vnet_hdr->csum_start = skb_checksum_start_offset(skb);
+ if (vlan_tx_tag_present(skb))
+ vnet_hdr->csum_start += VLAN_HLEN;
vnet_hdr->csum_offset = skb->csum_offset;
} else if (skb->ip_summed == CHECKSUM_UNNECESSARY) {
vnet_hdr->flags = VIRTIO_NET_HDR_F_DATA_VALID;
if (arg & TUN_F_TSO6)
feature_mask |= NETIF_F_TSO6;
}
-
- if (arg & TUN_F_UFO)
- feature_mask |= NETIF_F_UFO;
}
/* tun/tap driver inverts the usage for TSO offloads, where
* When user space turns off TSO, we turn off GSO/LRO so that
* user-space will not receive TSO frames.
*/
- if (feature_mask & (NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_UFO))
+ if (feature_mask & (NETIF_F_TSO | NETIF_F_TSO6))
features |= RX_OFFLOADS;
else
features &= ~RX_OFFLOADS;
case TUNSETOFFLOAD:
/* let the user check for future flags */
if (arg & ~(TUN_F_CSUM | TUN_F_TSO4 | TUN_F_TSO6 |
- TUN_F_TSO_ECN | TUN_F_UFO))
+ TUN_F_TSO_ECN))
return -EINVAL;
rtnl_lock();
switch (type & PTP_CLASS_PMASK) {
case PTP_CLASS_IPV4:
- offset += ETH_HLEN + IPV4_HLEN(data) + UDP_HLEN;
+ offset += ETH_HLEN + IPV4_HLEN(data + offset) + UDP_HLEN;
break;
case PTP_CLASS_IPV6:
offset += ETH_HLEN + IP6_HLEN + UDP_HLEN;
switch (type & PTP_CLASS_PMASK) {
case PTP_CLASS_IPV4:
- offset += ETH_HLEN + IPV4_HLEN(data) + UDP_HLEN;
+ offset += ETH_HLEN + IPV4_HLEN(data + offset) + UDP_HLEN;
break;
case PTP_CLASS_IPV6:
offset += ETH_HLEN + IP6_HLEN + UDP_HLEN;
#define MII_M1011_PHY_SCR 0x10
#define MII_M1011_PHY_SCR_AUTO_CROSS 0x0060
+#define MII_M1145_PHY_EXT_SR 0x1b
#define MII_M1145_PHY_EXT_CR 0x14
#define MII_M1145_RGMII_RX_DELAY 0x0080
#define MII_M1145_RGMII_TX_DELAY 0x0002
+#define MII_M1145_HWCFG_MODE_SGMII_NO_CLK 0x4
+#define MII_M1145_HWCFG_MODE_MASK 0xf
+#define MII_M1145_HWCFG_FIBER_COPPER_AUTO 0x8000
+
#define MII_M1111_PHY_LED_CONTROL 0x18
#define MII_M1111_PHY_LED_DIRECT 0x4100
#define MII_M1111_PHY_LED_COMBINE 0x411c
}
}
+ if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
+ int temp = phy_read(phydev, MII_M1145_PHY_EXT_SR);
+ if (temp < 0)
+ return temp;
+
+ temp &= ~MII_M1145_HWCFG_MODE_MASK;
+ temp |= MII_M1145_HWCFG_MODE_SGMII_NO_CLK;
+ temp |= MII_M1145_HWCFG_FIBER_COPPER_AUTO;
+
+ err = phy_write(phydev, MII_M1145_PHY_EXT_SR, temp);
+ if (err < 0)
+ return err;
+ }
+
err = marvell_of_reg_init(phydev);
if (err < 0)
return err;
{
struct mii_ioctl_data *mii_data = if_mii(ifr);
u16 val = mii_data->val_in;
+ bool change_autoneg = false;
switch (cmd) {
case SIOCGMIIPHY:
if (mii_data->phy_id == phydev->addr) {
switch (mii_data->reg_num) {
case MII_BMCR:
- if ((val & (BMCR_RESET | BMCR_ANENABLE)) == 0)
+ if ((val & (BMCR_RESET | BMCR_ANENABLE)) == 0) {
+ if (phydev->autoneg == AUTONEG_ENABLE)
+ change_autoneg = true;
phydev->autoneg = AUTONEG_DISABLE;
- else
+ if (val & BMCR_FULLDPLX)
+ phydev->duplex = DUPLEX_FULL;
+ else
+ phydev->duplex = DUPLEX_HALF;
+ if (val & BMCR_SPEED1000)
+ phydev->speed = SPEED_1000;
+ else if (val & BMCR_SPEED100)
+ phydev->speed = SPEED_100;
+ else phydev->speed = SPEED_10;
+ }
+ else {
+ if (phydev->autoneg == AUTONEG_DISABLE)
+ change_autoneg = true;
phydev->autoneg = AUTONEG_ENABLE;
- if (!phydev->autoneg && (val & BMCR_FULLDPLX))
- phydev->duplex = DUPLEX_FULL;
- else
- phydev->duplex = DUPLEX_HALF;
- if (!phydev->autoneg && (val & BMCR_SPEED1000))
- phydev->speed = SPEED_1000;
- else if (!phydev->autoneg &&
- (val & BMCR_SPEED100))
- phydev->speed = SPEED_100;
+ }
break;
case MII_ADVERTISE:
- phydev->advertising = val;
+ phydev->advertising = mii_adv_to_ethtool_adv_t(val);
+ change_autoneg = true;
break;
default:
/* do nothing */
if (mii_data->reg_num == MII_BMCR &&
val & BMCR_RESET)
return phy_init_hw(phydev);
+
+ if (change_autoneg)
+ return phy_start_aneg(phydev);
+
return 0;
case SIOCSHWTSTAMP:
err = get_filter(argp, &code);
if (err >= 0) {
+ struct bpf_prog *pass_filter = NULL;
struct sock_fprog_kern fprog = {
.len = err,
.filter = code,
};
- ppp_lock(ppp);
- if (ppp->pass_filter) {
- bpf_prog_destroy(ppp->pass_filter);
- ppp->pass_filter = NULL;
+ err = 0;
+ if (fprog.filter)
+ err = bpf_prog_create(&pass_filter, &fprog);
+ if (!err) {
+ ppp_lock(ppp);
+ if (ppp->pass_filter)
+ bpf_prog_destroy(ppp->pass_filter);
+ ppp->pass_filter = pass_filter;
+ ppp_unlock(ppp);
}
- if (fprog.filter != NULL)
- err = bpf_prog_create(&ppp->pass_filter,
- &fprog);
- else
- err = 0;
kfree(code);
- ppp_unlock(ppp);
}
break;
}
err = get_filter(argp, &code);
if (err >= 0) {
+ struct bpf_prog *active_filter = NULL;
struct sock_fprog_kern fprog = {
.len = err,
.filter = code,
};
- ppp_lock(ppp);
- if (ppp->active_filter) {
- bpf_prog_destroy(ppp->active_filter);
- ppp->active_filter = NULL;
+ err = 0;
+ if (fprog.filter)
+ err = bpf_prog_create(&active_filter, &fprog);
+ if (!err) {
+ ppp_lock(ppp);
+ if (ppp->active_filter)
+ bpf_prog_destroy(ppp->active_filter);
+ ppp->active_filter = active_filter;
+ ppp_unlock(ppp);
}
- if (fprog.filter != NULL)
- err = bpf_prog_create(&ppp->active_filter,
- &fprog);
- else
- err = 0;
kfree(code);
- ppp_unlock(ppp);
}
break;
}
int len = sizeof(struct sockaddr_pppox);
struct sockaddr_pppox sp;
- sp.sa_family = AF_PPPOX;
+ memset(&sp.sa_addr, 0, sizeof(sp.sa_addr));
+
+ sp.sa_family = AF_PPPOX;
sp.sa_protocol = PX_PROTO_PPTP;
sp.sa_addr.pptp = pppox_sk(sock->sk)->proto.pptp.src_addr;
#include <linux/nsproxy.h>
#include <linux/virtio_net.h>
#include <linux/rcupdate.h>
+#include <net/ipv6.h>
#include <net/net_namespace.h>
#include <net/netns/generic.h>
#include <net/rtnetlink.h>
struct net_device *dev;
netdev_features_t set_features;
#define TUN_USER_FEATURES (NETIF_F_HW_CSUM|NETIF_F_TSO_ECN|NETIF_F_TSO| \
- NETIF_F_TSO6|NETIF_F_UFO)
+ NETIF_F_TSO6)
int vnet_hdr_sz;
int sndbuf;
break;
}
+ skb_reset_network_header(skb);
+
if (gso.gso_type != VIRTIO_NET_HDR_GSO_NONE) {
pr_debug("GSO!\n");
switch (gso.gso_type & ~VIRTIO_NET_HDR_GSO_ECN) {
skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6;
break;
case VIRTIO_NET_HDR_GSO_UDP:
+ {
+ static bool warned;
+
+ if (!warned) {
+ warned = true;
+ netdev_warn(tun->dev,
+ "%s: using disabled UFO feature; please fix this program\n",
+ current->comm);
+ }
skb_shinfo(skb)->gso_type = SKB_GSO_UDP;
+ if (skb->protocol == htons(ETH_P_IPV6))
+ ipv6_proxy_select_ident(skb);
break;
+ }
default:
tun->dev->stats.rx_frame_errors++;
kfree_skb(skb);
skb_shinfo(skb)->tx_flags |= SKBTX_SHARED_FRAG;
}
- skb_reset_network_header(skb);
skb_probe_transport_header(skb, 0);
rxhash = skb_get_hash(skb);
struct tun_pi pi = { 0, skb->protocol };
ssize_t total = 0;
int vlan_offset = 0, copied;
+ int vlan_hlen = 0;
+ int vnet_hdr_sz = 0;
+
+ if (vlan_tx_tag_present(skb))
+ vlan_hlen = VLAN_HLEN;
+
+ if (tun->flags & TUN_VNET_HDR)
+ vnet_hdr_sz = tun->vnet_hdr_sz;
if (!(tun->flags & TUN_NO_PI)) {
if ((len -= sizeof(pi)) < 0)
return -EINVAL;
- if (len < skb->len) {
+ if (len < skb->len + vlan_hlen + vnet_hdr_sz) {
/* Packet will be striped */
pi.flags |= TUN_PKT_STRIP;
}
total += sizeof(pi);
}
- if (tun->flags & TUN_VNET_HDR) {
+ if (vnet_hdr_sz) {
struct virtio_net_hdr gso = { 0 }; /* no info leak */
- if ((len -= tun->vnet_hdr_sz) < 0)
+ if ((len -= vnet_hdr_sz) < 0)
return -EINVAL;
if (skb_is_gso(skb)) {
gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV4;
else if (sinfo->gso_type & SKB_GSO_TCPV6)
gso.gso_type = VIRTIO_NET_HDR_GSO_TCPV6;
- else if (sinfo->gso_type & SKB_GSO_UDP)
- gso.gso_type = VIRTIO_NET_HDR_GSO_UDP;
else {
pr_err("unexpected GSO type: "
"0x%x, gso_size %d, hdr_len %d\n",
if (skb->ip_summed == CHECKSUM_PARTIAL) {
gso.flags = VIRTIO_NET_HDR_F_NEEDS_CSUM;
- gso.csum_start = skb_checksum_start_offset(skb);
+ gso.csum_start = skb_checksum_start_offset(skb) +
+ vlan_hlen;
gso.csum_offset = skb->csum_offset;
} else if (skb->ip_summed == CHECKSUM_UNNECESSARY) {
gso.flags = VIRTIO_NET_HDR_F_DATA_VALID;
if (unlikely(memcpy_toiovecend(iv, (void *)&gso, total,
sizeof(gso))))
return -EFAULT;
- total += tun->vnet_hdr_sz;
+ total += vnet_hdr_sz;
}
copied = total;
- total += skb->len;
- if (!vlan_tx_tag_present(skb)) {
- len = min_t(int, skb->len, len);
- } else {
+ len = min_t(int, skb->len + vlan_hlen, len);
+ total += skb->len + vlan_hlen;
+ if (vlan_hlen) {
int copy, ret;
struct {
__be16 h_vlan_proto;
veth.h_vlan_TCI = htons(vlan_tx_tag_get(skb));
vlan_offset = offsetof(struct vlan_ethhdr, h_vlan_proto);
- len = min_t(int, skb->len + VLAN_HLEN, len);
- total += VLAN_HLEN;
copy = min_t(int, vlan_offset, len);
ret = skb_copy_datagram_const_iovec(skb, 0, iv, copied, copy);
features |= NETIF_F_TSO6;
arg &= ~(TUN_F_TSO4|TUN_F_TSO6);
}
-
- if (arg & TUN_F_UFO) {
- features |= NETIF_F_UFO;
- arg &= ~TUN_F_UFO;
- }
}
/* This gives the user a way to test for new features in future by
return ret;
}
- ret = asix_sw_reset(dev, AX_SWRESET_IPPD | AX_SWRESET_PRL);
- if (ret < 0)
- return ret;
-
- msleep(150);
-
- ret = asix_sw_reset(dev, AX_SWRESET_CLEAR);
- if (ret < 0)
- return ret;
-
- msleep(150);
-
- ret = asix_sw_reset(dev, embd_phy ? AX_SWRESET_IPRL : AX_SWRESET_PRTE);
+ ax88772_reset(dev);
/* Read PHYID register *AFTER* the PHY was reset properly */
phyid = asix_get_phyid(dev);
{
struct usbnet *dev = netdev_priv(net);
struct sockaddr *addr = p;
+ int ret;
if (netif_running(net))
return -EBUSY;
memcpy(net->dev_addr, addr->sa_data, ETH_ALEN);
/* Set the MAC address */
- return ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, ETH_ALEN,
+ ret = ax88179_write_cmd(dev, AX_ACCESS_MAC, AX_NODE_ID, ETH_ALEN,
ETH_ALEN, net->dev_addr);
+ if (ret < 0)
+ return ret;
+
+ return 0;
}
static const struct net_device_ops ax88179_netdev_ops = {
0xa6, 0x07, 0xc0, 0xff, 0xcb, 0x7e, 0x39, 0x2a,
};
+static void usbnet_cdc_update_filter(struct usbnet *dev)
+{
+ struct cdc_state *info = (void *) &dev->data;
+ struct usb_interface *intf = info->control;
+
+ u16 cdc_filter =
+ USB_CDC_PACKET_TYPE_ALL_MULTICAST | USB_CDC_PACKET_TYPE_DIRECTED |
+ USB_CDC_PACKET_TYPE_BROADCAST;
+
+ if (dev->net->flags & IFF_PROMISC)
+ cdc_filter |= USB_CDC_PACKET_TYPE_PROMISCUOUS;
+
+ /* FIXME cdc-ether has some multicast code too, though it complains
+ * in routine cases. info->ether describes the multicast support.
+ * Implement that here, manipulating the cdc filter as needed.
+ */
+
+ usb_control_msg(dev->udev,
+ usb_sndctrlpipe(dev->udev, 0),
+ USB_CDC_SET_ETHERNET_PACKET_FILTER,
+ USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ cdc_filter,
+ intf->cur_altsetting->desc.bInterfaceNumber,
+ NULL,
+ 0,
+ USB_CTRL_SET_TIMEOUT
+ );
+}
+
/* probes control interface, claims data interface, collects the bulk
* endpoints, activates data interface (if needed), maybe sets MTU.
* all pure cdc, except for certain firmware workarounds, and knowing
* don't do reset all the way. So the packet filter should
* be set to a sane initial value.
*/
- usb_control_msg(dev->udev,
- usb_sndctrlpipe(dev->udev, 0),
- USB_CDC_SET_ETHERNET_PACKET_FILTER,
- USB_TYPE_CLASS | USB_RECIP_INTERFACE,
- USB_CDC_PACKET_TYPE_ALL_MULTICAST | USB_CDC_PACKET_TYPE_DIRECTED | USB_CDC_PACKET_TYPE_BROADCAST,
- intf->cur_altsetting->desc.bInterfaceNumber,
- NULL,
- 0,
- USB_CTRL_SET_TIMEOUT
- );
+ usbnet_cdc_update_filter(dev);
+
return 0;
bad_desc:
return status;
}
- /* FIXME cdc-ether has some multicast code too, though it complains
- * in routine cases. info->ether describes the multicast support.
- * Implement that here, manipulating the cdc filter as needed.
- */
return 0;
}
EXPORT_SYMBOL_GPL(usbnet_cdc_bind);
.bind = usbnet_cdc_bind,
.unbind = usbnet_cdc_unbind,
.status = usbnet_cdc_status,
+ .set_rx_mode = usbnet_cdc_update_filter,
.manage_power = usbnet_manage_power,
};
.bind = usbnet_cdc_bind,
.unbind = usbnet_cdc_unbind,
.status = usbnet_cdc_status,
+ .set_rx_mode = usbnet_cdc_update_filter,
.manage_power = usbnet_manage_power,
};
{QMI_FIXED_INTF(0x413c, 0x81a4, 8)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */
{QMI_FIXED_INTF(0x413c, 0x81a8, 8)}, /* Dell Wireless 5808 Gobi(TM) 4G LTE Mobile Broadband Card */
{QMI_FIXED_INTF(0x413c, 0x81a9, 8)}, /* Dell Wireless 5808e Gobi(TM) 4G LTE Mobile Broadband Card */
+ {QMI_FIXED_INTF(0x03f0, 0x581d, 4)}, /* HP lt4112 LTE/HSPA+ Gobi 4G Module (Huawei me906e) */
/* 4. Gobi 1000 devices */
{QMI_GOBI1K_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
case -ESHUTDOWN:
netif_device_detach(tp->netdev);
case -ENOENT:
+ case -EPROTO:
+ netif_info(tp, intr, tp->netdev,
+ "Stop submitting intr, status %d\n", status);
return;
case -EOVERFLOW:
netif_info(tp, intr, tp->netdev, "intr status -EOVERFLOW\n");
if (res)
goto out;
+ /* set speed to 0 to avoid autoresume try to submit rx */
+ tp->speed = 0;
+
res = usb_autopm_get_interface(tp->intf);
if (res < 0) {
free_all_mem(tp);
clear_bit(WORK_ENABLE, &tp->flags);
usb_kill_urb(tp->intr_urb);
cancel_delayed_work_sync(&tp->schedule);
+
+ /* disable the tx/rx, if the workqueue has enabled them. */
if (tp->speed & LINK_STATUS)
tp->rtl_ops.disable(tp);
}
* be disable when autoresume occurs, because the
* netif_running() would be false.
*/
- if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
- rtl_runtime_suspend_enable(tp, false);
- clear_bit(SELECTIVE_SUSPEND, &tp->flags);
- }
+ rtl_runtime_suspend_enable(tp, false);
tasklet_disable(&tp->tl);
tp->rtl_ops.down(tp);
netif_device_detach(netdev);
}
- if (netif_running(netdev)) {
+ if (netif_running(netdev) && test_bit(WORK_ENABLE, &tp->flags)) {
clear_bit(WORK_ENABLE, &tp->flags);
usb_kill_urb(tp->intr_urb);
tasklet_disable(&tp->tl);
set_bit(WORK_ENABLE, &tp->flags);
}
usb_submit_urb(tp->intr_urb, GFP_KERNEL);
+ } else if (test_bit(SELECTIVE_SUSPEND, &tp->flags)) {
+ clear_bit(SELECTIVE_SUSPEND, &tp->flags);
}
mutex_unlock(&tp->control);
clear_bit(EVENT_LINK_CHANGE, &dev->flags);
}
+static void usbnet_set_rx_mode(struct net_device *net)
+{
+ struct usbnet *dev = netdev_priv(net);
+
+ usbnet_defer_kevent(dev, EVENT_SET_RX_MODE);
+}
+
+static void __handle_set_rx_mode(struct usbnet *dev)
+{
+ if (dev->driver_info->set_rx_mode)
+ (dev->driver_info->set_rx_mode)(dev);
+
+ clear_bit(EVENT_SET_RX_MODE, &dev->flags);
+}
+
/* work that cannot be done in interrupt context uses keventd.
*
* NOTE: with 2.5 we could do more of this using completion callbacks,
if (test_bit (EVENT_LINK_CHANGE, &dev->flags))
__handle_link_change(dev);
+ if (test_bit (EVENT_SET_RX_MODE, &dev->flags))
+ __handle_set_rx_mode(dev);
+
+
if (dev->flags)
netdev_dbg(dev->net, "kevent done, flags = 0x%lx\n", dev->flags);
}
.ndo_stop = usbnet_stop,
.ndo_start_xmit = usbnet_start_xmit,
.ndo_tx_timeout = usbnet_tx_timeout,
+ .ndo_set_rx_mode = usbnet_set_rx_mode,
.ndo_change_mtu = usbnet_change_mtu,
.ndo_set_mac_address = eth_mac_addr,
.ndo_validate_addr = eth_validate_addr,
skb_shinfo(skb)->gso_type = SKB_GSO_TCPV4;
break;
case VIRTIO_NET_HDR_GSO_UDP:
+ {
+ static bool warned;
+
+ if (!warned) {
+ warned = true;
+ netdev_warn(dev,
+ "host using disabled UFO feature; please fix it\n");
+ }
skb_shinfo(skb)->gso_type = SKB_GSO_UDP;
break;
+ }
case VIRTIO_NET_HDR_GSO_TCPV6:
skb_shinfo(skb)->gso_type = SKB_GSO_TCPV6;
break;
hdr->hdr.gso_type = VIRTIO_NET_HDR_GSO_TCPV4;
else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6)
hdr->hdr.gso_type = VIRTIO_NET_HDR_GSO_TCPV6;
- else if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP)
- hdr->hdr.gso_type = VIRTIO_NET_HDR_GSO_UDP;
else
BUG();
if (skb_shinfo(skb)->gso_type & SKB_GSO_TCP_ECN)
};
#endif
+static bool virtnet_fail_on_feature(struct virtio_device *vdev,
+ unsigned int fbit,
+ const char *fname, const char *dname)
+{
+ if (!virtio_has_feature(vdev, fbit))
+ return false;
+
+ dev_err(&vdev->dev, "device advertises feature %s but not %s",
+ fname, dname);
+
+ return true;
+}
+
+#define VIRTNET_FAIL_ON(vdev, fbit, dbit) \
+ virtnet_fail_on_feature(vdev, fbit, #fbit, dbit)
+
+static bool virtnet_validate_features(struct virtio_device *vdev)
+{
+ if (!virtio_has_feature(vdev, VIRTIO_NET_F_CTRL_VQ) &&
+ (VIRTNET_FAIL_ON(vdev, VIRTIO_NET_F_CTRL_RX,
+ "VIRTIO_NET_F_CTRL_VQ") ||
+ VIRTNET_FAIL_ON(vdev, VIRTIO_NET_F_CTRL_VLAN,
+ "VIRTIO_NET_F_CTRL_VQ") ||
+ VIRTNET_FAIL_ON(vdev, VIRTIO_NET_F_GUEST_ANNOUNCE,
+ "VIRTIO_NET_F_CTRL_VQ") ||
+ VIRTNET_FAIL_ON(vdev, VIRTIO_NET_F_MQ, "VIRTIO_NET_F_CTRL_VQ") ||
+ VIRTNET_FAIL_ON(vdev, VIRTIO_NET_F_CTRL_MAC_ADDR,
+ "VIRTIO_NET_F_CTRL_VQ"))) {
+ return false;
+ }
+
+ return true;
+}
+
static int virtnet_probe(struct virtio_device *vdev)
{
int i, err;
struct virtnet_info *vi;
u16 max_queue_pairs;
+ if (!virtnet_validate_features(vdev))
+ return -EINVAL;
+
/* Find if host supports multiqueue virtio_net device */
err = virtio_cread_feature(vdev, VIRTIO_NET_F_MQ,
struct virtio_net_config,
dev->features |= NETIF_F_HW_CSUM|NETIF_F_SG|NETIF_F_FRAGLIST;
if (virtio_has_feature(vdev, VIRTIO_NET_F_GSO)) {
- dev->hw_features |= NETIF_F_TSO | NETIF_F_UFO
+ dev->hw_features |= NETIF_F_TSO
| NETIF_F_TSO_ECN | NETIF_F_TSO6;
}
/* Individual feature bits: what can host handle? */
dev->hw_features |= NETIF_F_TSO6;
if (virtio_has_feature(vdev, VIRTIO_NET_F_HOST_ECN))
dev->hw_features |= NETIF_F_TSO_ECN;
- if (virtio_has_feature(vdev, VIRTIO_NET_F_HOST_UFO))
- dev->hw_features |= NETIF_F_UFO;
if (gso)
- dev->features |= dev->hw_features & (NETIF_F_ALL_TSO|NETIF_F_UFO);
+ dev->features |= dev->hw_features & NETIF_F_ALL_TSO;
/* (!csum && gso) case will be fixed by register_netdev() */
}
if (virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_CSUM))
/* If we can receive ANY GSO packets, we must allocate large ones. */
if (virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO4) ||
virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_TSO6) ||
- virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_ECN) ||
- virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_UFO))
+ virtio_has_feature(vdev, VIRTIO_NET_F_GUEST_ECN))
vi->big_packets = true;
if (virtio_has_feature(vdev, VIRTIO_NET_F_MRG_RXBUF))
static unsigned int features[] = {
VIRTIO_NET_F_CSUM, VIRTIO_NET_F_GUEST_CSUM,
VIRTIO_NET_F_GSO, VIRTIO_NET_F_MAC,
- VIRTIO_NET_F_HOST_TSO4, VIRTIO_NET_F_HOST_UFO, VIRTIO_NET_F_HOST_TSO6,
+ VIRTIO_NET_F_HOST_TSO4, VIRTIO_NET_F_HOST_TSO6,
VIRTIO_NET_F_HOST_ECN, VIRTIO_NET_F_GUEST_TSO4, VIRTIO_NET_F_GUEST_TSO6,
- VIRTIO_NET_F_GUEST_ECN, VIRTIO_NET_F_GUEST_UFO,
+ VIRTIO_NET_F_GUEST_ECN,
VIRTIO_NET_F_MRG_RXBUF, VIRTIO_NET_F_STATUS, VIRTIO_NET_F_CTRL_VQ,
VIRTIO_NET_F_CTRL_RX, VIRTIO_NET_F_CTRL_VLAN,
VIRTIO_NET_F_GUEST_ANNOUNCE, VIRTIO_NET_F_MQ,
#define VXLAN_FLAGS 0x08000000 /* struct vxlanhdr.vx_flags required value. */
-/* VXLAN protocol header */
-struct vxlanhdr {
- __be32 vx_flags;
- __be32 vx_vni;
-};
-
/* UDP port for VXLAN traffic.
* The IANA assigned port is 4789, but the Linux default is 8472
* for compatibility with early adopters.
return list_first_entry(&fdb->remotes, struct vxlan_rdst, list);
}
-/* Find VXLAN socket based on network namespace and UDP port */
-static struct vxlan_sock *vxlan_find_sock(struct net *net, __be16 port)
+/* Find VXLAN socket based on network namespace, address family and UDP port */
+static struct vxlan_sock *vxlan_find_sock(struct net *net,
+ sa_family_t family, __be16 port)
{
struct vxlan_sock *vs;
hlist_for_each_entry_rcu(vs, vs_head(net, port), hlist) {
- if (inet_sk(vs->sock->sk)->inet_sport == port)
+ if (inet_sk(vs->sock->sk)->inet_sport == port &&
+ inet_sk(vs->sock->sk)->sk.sk_family == family)
return vs;
}
return NULL;
}
/* Look up VNI in a per net namespace table */
-static struct vxlan_dev *vxlan_find_vni(struct net *net, u32 id, __be16 port)
+static struct vxlan_dev *vxlan_find_vni(struct net *net, u32 id,
+ sa_family_t family, __be16 port)
{
struct vxlan_sock *vs;
- vs = vxlan_find_sock(net, port);
+ vs = vxlan_find_sock(net, family, port);
if (!vs)
return NULL;
int vxlan_len = sizeof(struct vxlanhdr) + sizeof(struct ethhdr);
int err = -ENOSYS;
+ udp_tunnel_gro_complete(skb, nhoff);
+
eh = (struct ethhdr *)(skb->data + nhoff + sizeof(struct vxlanhdr));
type = eh->h_proto;
struct vxlan_dev *dst_vxlan;
ip_rt_put(rt);
- dst_vxlan = vxlan_find_vni(vxlan->net, vni, dst_port);
+ dst_vxlan = vxlan_find_vni(vxlan->net, vni,
+ dst->sa.sa_family, dst_port);
if (!dst_vxlan)
goto tx_error;
vxlan_encap_bypass(skb, vxlan, dst_vxlan);
struct vxlan_dev *dst_vxlan;
dst_release(ndst);
- dst_vxlan = vxlan_find_vni(vxlan->net, vni, dst_port);
+ dst_vxlan = vxlan_find_vni(vxlan->net, vni,
+ dst->sa.sa_family, dst_port);
if (!dst_vxlan)
goto tx_error;
vxlan_encap_bypass(skb, vxlan, dst_vxlan);
struct vxlan_dev *vxlan = netdev_priv(dev);
struct vxlan_net *vn = net_generic(vxlan->net, vxlan_net_id);
struct vxlan_sock *vs;
+ bool ipv6 = vxlan->flags & VXLAN_F_IPV6;
dev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
if (!dev->tstats)
return -ENOMEM;
spin_lock(&vn->sock_lock);
- vs = vxlan_find_sock(vxlan->net, vxlan->dst_port);
+ vs = vxlan_find_sock(vxlan->net, ipv6 ? AF_INET6 : AF_INET,
+ vxlan->dst_port);
if (vs) {
/* If we have a socket with same port already, reuse it */
atomic_inc(&vs->refcnt);
if (ipv6) {
udp_conf.family = AF_INET6;
udp_conf.use_udp6_tx_checksums =
- !!(flags & VXLAN_F_UDP_ZERO_CSUM6_TX);
+ !(flags & VXLAN_F_UDP_ZERO_CSUM6_TX);
udp_conf.use_udp6_rx_checksums =
- !!(flags & VXLAN_F_UDP_ZERO_CSUM6_RX);
+ !(flags & VXLAN_F_UDP_ZERO_CSUM6_RX);
} else {
udp_conf.family = AF_INET;
udp_conf.local_ip.s_addr = INADDR_ANY;
{
struct vxlan_net *vn = net_generic(net, vxlan_net_id);
struct vxlan_sock *vs;
+ bool ipv6 = flags & VXLAN_F_IPV6;
vs = vxlan_socket_create(net, port, rcv, data, flags);
if (!IS_ERR(vs))
return vs;
spin_lock(&vn->sock_lock);
- vs = vxlan_find_sock(net, port);
+ vs = vxlan_find_sock(net, ipv6 ? AF_INET6 : AF_INET, port);
if (vs) {
if (vs->rcv == rcv)
atomic_inc(&vs->refcnt);
nla_get_u8(data[IFLA_VXLAN_UDP_ZERO_CSUM6_RX]))
vxlan->flags |= VXLAN_F_UDP_ZERO_CSUM6_RX;
- if (vxlan_find_vni(net, vni, vxlan->dst_port)) {
+ if (vxlan_find_vni(net, vni, use_ipv6 ? AF_INET6 : AF_INET,
+ vxlan->dst_port)) {
pr_info("duplicate VNI %u\n", vni);
return -EEXIST;
}
struct ath_regulatory {
char alpha2[2];
+ enum nl80211_dfs_regions region;
u16 country_code;
u16 max_power_level;
u16 current_rd;
ah->enabled_cals |= TX_CL_CAL;
else
ah->enabled_cals &= ~TX_CL_CAL;
+
+ if (AR_SREV_9340(ah) || AR_SREV_9531(ah) || AR_SREV_9550(ah)) {
+ if (ah->is_clk_25mhz) {
+ REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x17c << 1);
+ REG_WRITE(ah, AR_SLP32_MODE, 0x0010f3d7);
+ REG_WRITE(ah, AR_SLP32_INC, 0x0001e7ae);
+ } else {
+ REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x261 << 1);
+ REG_WRITE(ah, AR_SLP32_MODE, 0x0010f400);
+ REG_WRITE(ah, AR_SLP32_INC, 0x0001e800);
+ }
+ udelay(100);
+ }
}
static void ar9003_hw_prog_ini(struct ath_hw *ah,
{
struct ath_regulatory *reg = ath9k_hw_regulatory(ah);
- if (reg->power_limit != new_txpow) {
+ if (reg->power_limit != new_txpow)
ath9k_hw_set_txpowerlimit(ah, new_txpow, false);
- /* read back in case value is clamped */
- *txpower = reg->max_power_level;
- }
+
+ /* read back in case value is clamped */
+ *txpower = reg->max_power_level;
}
EXPORT_SYMBOL(ath9k_cmn_update_txpow);
"%2d %2x %1x %2x %2x\n",
i, (*qcuBase & (0x7 << qcuOffset)) >> qcuOffset,
(*qcuBase & (0x8 << qcuOffset)) >> (qcuOffset + 3),
- val[2] & (0x7 << (i * 3)) >> (i * 3),
+ (val[2] & (0x7 << (i * 3))) >> (i * 3),
(*dcuBase & (0x1f << dcuOffset)) >> dcuOffset);
}
udelay(RTC_PLL_SETTLE_DELAY);
REG_WRITE(ah, AR_RTC_SLEEP_CLK, AR_RTC_FORCE_DERIVED_CLK);
-
- if (AR_SREV_9340(ah) || AR_SREV_9550(ah)) {
- if (ah->is_clk_25mhz) {
- REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x17c << 1);
- REG_WRITE(ah, AR_SLP32_MODE, 0x0010f3d7);
- REG_WRITE(ah, AR_SLP32_INC, 0x0001e7ae);
- } else {
- REG_WRITE(ah, AR_RTC_DERIVED_CLK, 0x261 << 1);
- REG_WRITE(ah, AR_SLP32_MODE, 0x0010f400);
- REG_WRITE(ah, AR_SLP32_INC, 0x0001e800);
- }
- udelay(100);
- }
}
static void ath9k_hw_init_interrupt_masks(struct ath_hw *ah,
#endif
};
+#ifdef CONFIG_ATH9K_CHANNEL_CONTEXT
+static void ath9k_set_mcc_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
+{
+ struct ath_hw *ah = sc->sc_ah;
+ struct ath_common *common = ath9k_hw_common(ah);
+
+ if (!ath9k_is_chanctx_enabled())
+ return;
+
+ hw->flags |= IEEE80211_HW_QUEUE_CONTROL;
+ hw->queues = ATH9K_NUM_TX_QUEUES;
+ hw->offchannel_tx_hw_queue = hw->queues - 1;
+ hw->wiphy->interface_modes &= ~ BIT(NL80211_IFTYPE_WDS);
+ hw->wiphy->iface_combinations = if_comb_multi;
+ hw->wiphy->n_iface_combinations = ARRAY_SIZE(if_comb_multi);
+ hw->wiphy->max_scan_ssids = 255;
+ hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
+ hw->wiphy->max_remain_on_channel_duration = 10000;
+ hw->chanctx_data_size = sizeof(void *);
+ hw->extra_beacon_tailroom =
+ sizeof(struct ieee80211_p2p_noa_attr) + 9;
+
+ ath_dbg(common, CHAN_CTX, "Use channel contexts\n");
+}
+#endif /* CONFIG_ATH9K_CHANNEL_CONTEXT */
+
static void ath9k_set_hw_capab(struct ath_softc *sc, struct ieee80211_hw *hw)
{
struct ath_hw *ah = sc->sc_ah;
IEEE80211_HW_SPECTRUM_MGMT |
IEEE80211_HW_REPORTS_TX_ACK_STATUS |
IEEE80211_HW_SUPPORTS_RC_TABLE |
- IEEE80211_HW_QUEUE_CONTROL |
IEEE80211_HW_SUPPORTS_HT_CCK_RATES;
if (ath9k_ps_enable)
hw->wiphy->n_iface_combinations = ARRAY_SIZE(if_comb);
}
-#ifdef CONFIG_ATH9K_CHANNEL_CONTEXT
-
- if (ath9k_is_chanctx_enabled()) {
- hw->wiphy->interface_modes &= ~ BIT(NL80211_IFTYPE_WDS);
- hw->wiphy->iface_combinations = if_comb_multi;
- hw->wiphy->n_iface_combinations = ARRAY_SIZE(if_comb_multi);
- hw->wiphy->max_scan_ssids = 255;
- hw->wiphy->max_scan_ie_len = IEEE80211_MAX_DATA_LEN;
- hw->wiphy->max_remain_on_channel_duration = 10000;
- hw->chanctx_data_size = sizeof(void *);
- hw->extra_beacon_tailroom =
- sizeof(struct ieee80211_p2p_noa_attr) + 9;
-
- ath_dbg(common, CHAN_CTX, "Use channel contexts\n");
- }
-
-#endif /* CONFIG_ATH9K_CHANNEL_CONTEXT */
-
hw->wiphy->flags &= ~WIPHY_FLAG_PS_ON_BY_DEFAULT;
hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
hw->wiphy->flags |= WIPHY_FLAG_HAS_CHANNEL_SWITCH;
hw->wiphy->flags |= WIPHY_FLAG_AP_UAPSD;
- /* allow 4 queues per channel context +
- * 1 cab queue + 1 offchannel tx queue
- */
- hw->queues = ATH9K_NUM_TX_QUEUES;
- /* last queue for offchannel */
- hw->offchannel_tx_hw_queue = hw->queues - 1;
+ hw->queues = 4;
hw->max_rates = 4;
hw->max_listen_interval = 10;
hw->max_rate_tries = 10;
hw->wiphy->bands[IEEE80211_BAND_5GHZ] =
&common->sbands[IEEE80211_BAND_5GHZ];
+#ifdef CONFIG_ATH9K_CHANNEL_CONTEXT
+ ath9k_set_mcc_capab(sc, hw);
+#endif
ath9k_init_wow(hw);
ath9k_cmn_reload_chainmask(ah);
struct ath_vif *avp;
/*
- * Pick the MAC address of the first interface as the new hardware
- * MAC address. The hardware will use it together with the BSSID mask
- * when matching addresses.
+ * The hardware will use primary station addr together with the
+ * BSSID mask when matching addresses.
*/
memset(iter_data, 0, sizeof(*iter_data));
memset(&iter_data->mask, 0xff, ETH_ALEN);
{
int i;
+ if (!ath9k_is_chanctx_enabled())
+ return;
+
for (i = 0; i < IEEE80211_NUM_ACS; i++)
vif->hw_queue[i] = i;
list_add_tail(&avp->list, &avp->chanctx->vifs);
}
+ ath9k_calculate_summary_state(sc, avp->chanctx);
+
ath9k_assign_hw_queues(hw, vif);
an->sc = sc;
ath_tx_node_cleanup(sc, &avp->mcast_node);
+ ath9k_calculate_summary_state(sc, avp->chanctx);
+
mutex_unlock(&sc->mutex);
}
if (txq->stopped &&
txq->pending_frames < sc->tx.txq_max_pending[q]) {
- ieee80211_wake_queue(sc->hw, info->hw_queue);
+ if (ath9k_is_chanctx_enabled())
+ ieee80211_wake_queue(sc->hw, info->hw_queue);
+ else
+ ieee80211_wake_queue(sc->hw, q);
txq->stopped = false;
}
}
fi->txq = q;
if (++txq->pending_frames > sc->tx.txq_max_pending[q] &&
!txq->stopped) {
- ieee80211_stop_queue(sc->hw, info->hw_queue);
+ if (ath9k_is_chanctx_enabled())
+ ieee80211_stop_queue(sc->hw, info->hw_queue);
+ else
+ ieee80211_stop_queue(sc->hw, q);
txq->stopped = true;
}
}
if (!request)
return;
+ reg->region = request->dfs_region;
switch (request->initiator) {
case NL80211_REGDOM_SET_BY_CORE:
/*
return SD_NO_CTL;
}
+ if (ath_regd_get_eepromRD(reg) == CTRY_DEFAULT) {
+ switch (reg->region) {
+ case NL80211_DFS_FCC:
+ return CTL_FCC;
+ case NL80211_DFS_ETSI:
+ return CTL_ETSI;
+ case NL80211_DFS_JP:
+ return CTL_MKK;
+ default:
+ break;
+ }
+ }
+
switch (band) {
case IEEE80211_BAND_2GHZ:
return reg->regpair->reg_2ghz_ctl;
void b43_phy_copy(struct b43_wldev *dev, u16 destreg, u16 srcreg)
{
- assert_mac_suspended(dev);
- dev->phy.ops->phy_write(dev, destreg,
- dev->phy.ops->phy_read(dev, srcreg));
+ b43_phy_write(dev, destreg, b43_phy_read(dev, srcreg));
}
void b43_phy_mask(struct b43_wldev *dev, u16 offset, u16 mask)
struct brcmf_sdio_dev *sdiodev)
{
int i;
- uint fw_len, nv_len;
char end;
for (i = 0; i < ARRAY_SIZE(brcmf_fwname_data); i++) {
return -ENODEV;
}
- fw_len = sizeof(sdiodev->fw_name) - 1;
- nv_len = sizeof(sdiodev->nvram_name) - 1;
/* check if firmware path is provided by module parameter */
if (brcmf_firmware_path[0] != '\0') {
- strncpy(sdiodev->fw_name, brcmf_firmware_path, fw_len);
- strncpy(sdiodev->nvram_name, brcmf_firmware_path, nv_len);
- fw_len -= strlen(sdiodev->fw_name);
- nv_len -= strlen(sdiodev->nvram_name);
+ strlcpy(sdiodev->fw_name, brcmf_firmware_path,
+ sizeof(sdiodev->fw_name));
+ strlcpy(sdiodev->nvram_name, brcmf_firmware_path,
+ sizeof(sdiodev->nvram_name));
end = brcmf_firmware_path[strlen(brcmf_firmware_path) - 1];
if (end != '/') {
- strncat(sdiodev->fw_name, "/", fw_len);
- strncat(sdiodev->nvram_name, "/", nv_len);
- fw_len--;
- nv_len--;
+ strlcat(sdiodev->fw_name, "/",
+ sizeof(sdiodev->fw_name));
+ strlcat(sdiodev->nvram_name, "/",
+ sizeof(sdiodev->nvram_name));
}
}
- strncat(sdiodev->fw_name, brcmf_fwname_data[i].bin, fw_len);
- strncat(sdiodev->nvram_name, brcmf_fwname_data[i].nv, nv_len);
+ strlcat(sdiodev->fw_name, brcmf_fwname_data[i].bin,
+ sizeof(sdiodev->fw_name));
+ strlcat(sdiodev->nvram_name, brcmf_fwname_data[i].nv,
+ sizeof(sdiodev->nvram_name));
return 0;
}
return;
irq = irq_of_parse_and_map(np, 0);
- if (irq < 0) {
- brcmf_err("interrupt could not be mapped: err=%d\n", irq);
+ if (!irq) {
+ brcmf_err("interrupt could not be mapped\n");
devm_kfree(dev, sdiodev->pdata);
return;
}
#include <linux/pci.h>
#include <linux/vmalloc.h>
#include <linux/delay.h>
-#include <linux/unaligned/access_ok.h>
#include <linux/interrupt.h>
#include <linux/bcma/bcma.h>
#include <linux/sched.h>
+#include <asm/unaligned.h>
#include <soc.h>
#include <chipcommon.h>
goto finalize;
}
- if (!brcmf_usb_ioctl_resp_wait(devinfo))
+ if (!brcmf_usb_ioctl_resp_wait(devinfo)) {
+ usb_kill_urb(devinfo->ctl_urb);
ret = -ETIMEDOUT;
- else
+ } else {
memcpy(buffer, tmpbuf, buflen);
+ }
finalize:
kfree(tmpbuf);
primary_offset = ch->center_freq1 - ch->chan->center_freq;
switch (ch->width) {
case NL80211_CHAN_WIDTH_20:
+ case NL80211_CHAN_WIDTH_20_NOHT:
ch_inf.bw = BRCMU_CHAN_BW_20;
WARN_ON(primary_offset != 0);
break;
ch_inf.sb = BRCMU_CHAN_SB_LU;
}
break;
+ case NL80211_CHAN_WIDTH_80P80:
+ case NL80211_CHAN_WIDTH_160:
+ case NL80211_CHAN_WIDTH_5:
+ case NL80211_CHAN_WIDTH_10:
default:
WARN_ON_ONCE(1);
}
case IEEE80211_BAND_5GHZ:
ch_inf.band = BRCMU_CHAN_BAND_5G;
break;
+ case IEEE80211_BAND_60GHZ:
default:
WARN_ON_ONCE(1);
}
u32 queues, bool drop)
{
struct iwl_priv *priv = IWL_MAC80211_GET_DVM(hw);
+ u32 scd_queues;
mutex_lock(&priv->mutex);
IWL_DEBUG_MAC80211(priv, "enter\n");
goto done;
}
- /*
- * mac80211 will not push any more frames for transmit
- * until the flush is completed
- */
- if (drop) {
- IWL_DEBUG_MAC80211(priv, "send flush command\n");
- if (iwlagn_txfifo_flush(priv, 0)) {
- IWL_ERR(priv, "flush request fail\n");
- goto done;
- }
+ scd_queues = BIT(priv->cfg->base_params->num_of_queues) - 1;
+ scd_queues &= ~(BIT(IWL_IPAN_CMD_QUEUE_NUM) |
+ BIT(IWL_DEFAULT_CMD_QUEUE_NUM));
+
+ if (vif)
+ scd_queues &= ~BIT(vif->hw_queue[IEEE80211_AC_VO]);
+
+ IWL_DEBUG_TX_QUEUES(priv, "Flushing SCD queues: 0x%x\n", scd_queues);
+ if (iwlagn_txfifo_flush(priv, scd_queues)) {
+ IWL_ERR(priv, "flush request fail\n");
+ goto done;
}
- IWL_DEBUG_MAC80211(priv, "wait transmit/flush all frames\n");
+ IWL_DEBUG_TX_QUEUES(priv, "wait transmit/flush all frames\n");
iwl_trans_wait_tx_queue_empty(priv->trans, 0xffffffff);
done:
mutex_unlock(&priv->mutex);
#define IWL8000_TX_POWER_VERSION 0xffff /* meaningless */
#define IWL8000_FW_PRE "iwlwifi-8000"
-#define IWL8000_MODULE_FIRMWARE(api) IWL8000_FW_PRE __stringify(api) ".ucode"
+#define IWL8000_MODULE_FIRMWARE(api) \
+ IWL8000_FW_PRE "-" __stringify(api) ".ucode"
#define NVM_HW_SECTION_NUM_FAMILY_8000 10
#define DEFAULT_NVM_FILE_FAMILY_8000 "iwl_nvm_8000.bin"
* @IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT: supports Quiet Period requests
* @IWL_UCODE_TLV_CAPA_DQA_SUPPORT: supports dynamic queue allocation (DQA),
* which also implies support for the scheduler configuration command
+ * @IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT: supports Hot Spot Command
*/
enum iwl_ucode_tlv_capa {
IWL_UCODE_TLV_CAPA_D0I3_SUPPORT = BIT(0),
IWL_UCODE_TLV_CAPA_WFA_TPC_REP_IE_SUPPORT = BIT(10),
IWL_UCODE_TLV_CAPA_QUIET_PERIOD_SUPPORT = BIT(11),
IWL_UCODE_TLV_CAPA_DQA_SUPPORT = BIT(12),
+ IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT = BIT(18),
};
/* The default calibrate table size if not specified by firmware file */
* Set during transport allocation.
* @hw_id_str: a string with info about HW ID. Set during transport allocation.
* @pm_support: set to true in start_hw if link pm is supported
+ * @ltr_enabled: set to true if the LTR is enabled
* @dev_cmd_pool: pool for Tx cmd allocation - for internal use only.
* The user should use iwl_trans_{alloc,free}_tx_cmd.
* @dev_cmd_headroom: room needed for the transport's private use before the
u8 rx_mpdu_cmd, rx_mpdu_cmd_hdr_size;
bool pm_support;
+ bool ltr_enabled;
/* The following fields are internal only */
struct kmem_cache *dev_cmd_pool;
};
static const __le32 iwl_bt_mprio_lut[BT_COEX_MULTI_PRIO_LUT_SIZE] = {
- cpu_to_le32(0x28412201),
- cpu_to_le32(0x11118451),
+ cpu_to_le32(0x2e402280),
+ cpu_to_le32(0x7711a751),
};
struct corunning_block_luts {
};
static const __le32 iwl_bt_mprio_lut[BT_COEX_MULTI_PRIO_LUT_SIZE] = {
- cpu_to_le32(0x28412201),
- cpu_to_le32(0x11118451),
+ cpu_to_le32(0x2e402280),
+ cpu_to_le32(0x7711a751),
};
struct corunning_block_luts {
/* Power Management Commands, Responses, Notifications */
+/**
+ * enum iwl_ltr_config_flags - masks for LTR config command flags
+ * @LTR_CFG_FLAG_FEATURE_ENABLE: Feature operational status
+ * @LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS: allow LTR change on shadow
+ * memory access
+ * @LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH: allow LTR msg send on ANY LTR
+ * reg change
+ * @LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3: allow LTR msg send on transition from
+ * D0 to D3
+ * @LTR_CFG_FLAG_SW_SET_SHORT: fixed static short LTR register
+ * @LTR_CFG_FLAG_SW_SET_LONG: fixed static short LONG register
+ * @LTR_CFG_FLAG_DENIE_C10_ON_PD: allow going into C10 on PD
+ */
+enum iwl_ltr_config_flags {
+ LTR_CFG_FLAG_FEATURE_ENABLE = BIT(0),
+ LTR_CFG_FLAG_HW_DIS_ON_SHADOW_REG_ACCESS = BIT(1),
+ LTR_CFG_FLAG_HW_EN_SHRT_WR_THROUGH = BIT(2),
+ LTR_CFG_FLAG_HW_DIS_ON_D0_2_D3 = BIT(3),
+ LTR_CFG_FLAG_SW_SET_SHORT = BIT(4),
+ LTR_CFG_FLAG_SW_SET_LONG = BIT(5),
+ LTR_CFG_FLAG_DENIE_C10_ON_PD = BIT(6),
+};
+
+/**
+ * struct iwl_ltr_config_cmd - configures the LTR
+ * @flags: See %enum iwl_ltr_config_flags
+ */
+struct iwl_ltr_config_cmd {
+ __le32 flags;
+ __le32 static_long;
+ __le32 static_short;
+} __packed;
+
/* Radio LP RX Energy Threshold measured in dBm */
#define POWER_LPRX_RSSI_THRESHOLD 75
#define POWER_LPRX_RSSI_THRESHOLD_MAX 94
#define POWER_LPRX_RSSI_THRESHOLD_MIN 30
/**
- * enum iwl_scan_flags - masks for power table command flags
+ * enum iwl_power_flags - masks for power table command flags
* @POWER_FLAGS_POWER_SAVE_ENA_MSK: '1' Allow to save power by turning off
* receiver and transmitter. '0' - does not allow.
* @POWER_FLAGS_POWER_MANAGEMENT_ENA_MSK: '0' Driver disables power management,
/* Power - legacy power table command */
POWER_TABLE_CMD = 0x77,
PSM_UAPSD_AP_MISBEHAVING_NOTIFICATION = 0x78,
+ LTR_CONFIG = 0xee,
/* Thermal Throttling*/
REPLY_THERMAL_MNG_BACKOFF = 0x7e,
lockdep_assert_held(&mvm->mutex);
- if (WARN_ON_ONCE(mvm->init_ucode_complete))
+ if (WARN_ON_ONCE(mvm->init_ucode_complete || mvm->calibrating))
return 0;
iwl_init_notification_wait(&mvm->notif_wait,
goto out;
}
+ mvm->calibrating = true;
+
/* Send TX valid antennas before triggering calibrations */
ret = iwl_send_tx_ant_cfg(mvm, mvm->fw->valid_tx_ant);
if (ret)
MVM_UCODE_CALIB_TIMEOUT);
if (!ret)
mvm->init_ucode_complete = true;
+
+ if (ret && iwl_mvm_is_radio_killed(mvm)) {
+ IWL_DEBUG_RF_KILL(mvm, "RFKILL while calibrating.\n");
+ ret = 1;
+ }
goto out;
error:
iwl_remove_notification(&mvm->notif_wait, &calib_wait);
out:
+ mvm->calibrating = false;
if (iwlmvm_mod_params.init_dbg && !mvm->nvm_data) {
/* we want to debug INIT and we have no NVM - fake */
mvm->nvm_data = kzalloc(sizeof(struct iwl_nvm_data) +
/* Initialize tx backoffs to the minimal possible */
iwl_mvm_tt_tx_backoff(mvm, 0);
+ if (mvm->trans->ltr_enabled) {
+ struct iwl_ltr_config_cmd cmd = {
+ .flags = cpu_to_le32(LTR_CFG_FLAG_FEATURE_ENABLE),
+ };
+
+ WARN_ON(iwl_mvm_send_cmd_pdu(mvm, LTR_CONFIG, 0,
+ sizeof(cmd), &cmd));
+ }
+
ret = iwl_mvm_power_update_device(mvm);
if (ret)
goto error;
}
if (IEEE80211_SKB_CB(skb)->hw_queue == IWL_MVM_OFFCHANNEL_QUEUE &&
- !test_bit(IWL_MVM_STATUS_ROC_RUNNING, &mvm->status))
+ !test_bit(IWL_MVM_STATUS_ROC_RUNNING, &mvm->status) &&
+ !test_bit(IWL_MVM_STATUS_ROC_AUX_RUNNING, &mvm->status))
goto drop;
/* treat non-bufferable MMPDUs as broadcast if sta is sleeping */
mvm->scan_status = IWL_MVM_SCAN_NONE;
mvm->ps_disabled = false;
+ mvm->calibrating = false;
/* just in case one was running */
ieee80211_remain_on_channel_expired(mvm->hw);
if (changes & BSS_CHANGED_BEACON &&
iwl_mvm_mac_ctxt_beacon_changed(mvm, vif))
IWL_WARN(mvm, "Failed updating beacon data\n");
+
+ if (changes & BSS_CHANGED_TXPOWER) {
+ IWL_DEBUG_CALIB(mvm, "Changing TX Power to %d\n",
+ bss_conf->txpower);
+ iwl_mvm_set_tx_power(mvm, vif, bss_conf->txpower);
+ }
+
}
static void iwl_mvm_bss_info_changed(struct ieee80211_hw *hw,
/* Set the node address */
memcpy(aux_roc_req.node_addr, vif->addr, ETH_ALEN);
+ lockdep_assert_held(&mvm->mutex);
+
+ spin_lock_bh(&mvm->time_event_lock);
+
+ if (WARN_ON(te_data->id == HOT_SPOT_CMD)) {
+ spin_unlock_bh(&mvm->time_event_lock);
+ return -EIO;
+ }
+
te_data->vif = vif;
te_data->duration = duration;
te_data->id = HOT_SPOT_CMD;
- lockdep_assert_held(&mvm->mutex);
-
- spin_lock_bh(&mvm->time_event_lock);
- list_add_tail(&te_data->list, &mvm->time_event_list);
spin_unlock_bh(&mvm->time_event_lock);
/*
IWL_DEBUG_MAC80211(mvm, "enter (%d, %d, %d)\n", channel->hw_value,
duration, type);
+ mutex_lock(&mvm->mutex);
+
switch (vif->type) {
case NL80211_IFTYPE_STATION:
- /* Use aux roc framework (HS20) */
- ret = iwl_mvm_send_aux_roc_cmd(mvm, channel,
- vif, duration);
- return ret;
+ if (mvm->fw->ucode_capa.capa[0] &
+ IWL_UCODE_TLV_CAPA_HOTSPOT_SUPPORT) {
+ /* Use aux roc framework (HS20) */
+ ret = iwl_mvm_send_aux_roc_cmd(mvm, channel,
+ vif, duration);
+ goto out_unlock;
+ }
+ IWL_ERR(mvm, "hotspot not supported\n");
+ ret = -EINVAL;
+ goto out_unlock;
case NL80211_IFTYPE_P2P_DEVICE:
/* handle below */
break;
default:
IWL_ERR(mvm, "vif isn't P2P_DEVICE: %d\n", vif->type);
- return -EINVAL;
+ ret = -EINVAL;
+ goto out_unlock;
}
- mutex_lock(&mvm->mutex);
-
for (i = 0; i < NUM_PHY_CTX; i++) {
phy_ctxt = &mvm->phy_ctxts[i];
if (phy_ctxt->ref == 0 || mvmvif->phy_ctxt == phy_ctxt)
enum iwl_ucode_type cur_ucode;
bool ucode_loaded;
bool init_ucode_complete;
+ bool calibrating;
u32 error_event_table;
u32 log_event_table;
u32 umac_error_event_table;
CMD(DTS_MEASUREMENT_NOTIFICATION),
CMD(REPLY_THERMAL_MNG_BACKOFF),
CMD(MAC_PM_POWER_TABLE),
+ CMD(LTR_CONFIG),
CMD(BT_COEX_CI),
CMD(BT_COEX_UPDATE_SW_BOOST),
CMD(BT_COEX_UPDATE_CORUN_LUT),
}
mvm->sf_state = SF_UNINIT;
mvm->low_latency_agg_frame_limit = 6;
+ mvm->cur_ucode = IWL_UCODE_INIT;
mutex_init(&mvm->mutex);
mutex_init(&mvm->d0i3_suspend_mutex);
static bool iwl_mvm_set_hw_rfkill_state(struct iwl_op_mode *op_mode, bool state)
{
struct iwl_mvm *mvm = IWL_OP_MODE_GET_MVM(op_mode);
+ bool calibrating = ACCESS_ONCE(mvm->calibrating);
if (state)
set_bit(IWL_MVM_STATUS_HW_RFKILL, &mvm->status);
wiphy_rfkill_set_hw_state(mvm->hw->wiphy, iwl_mvm_is_radio_killed(mvm));
- return state && mvm->cur_ucode != IWL_UCODE_INIT;
+ /* iwl_run_init_mvm_ucode is waiting for results, abort it */
+ if (calibrating)
+ iwl_abort_notification_waits(&mvm->notif_wait);
+
+ /*
+ * Stop the device if we run OPERATIONAL firmware or if we are in the
+ * middle of the calibrations.
+ */
+ return state && (mvm->cur_ucode != IWL_UCODE_INIT || calibrating);
}
static void iwl_mvm_free_skb(struct iwl_op_mode *op_mode, struct sk_buff *skb)
basic_ssid ? 1 : 0);
cmd->tx_cmd.tx_flags = cpu_to_le32(TX_CMD_FLG_SEQ_CTL |
- TX_CMD_FLG_BT_DIS);
+ 3 << TX_CMD_FLG_BT_PRIO_POS);
+
cmd->tx_cmd.sta_id = mvm->aux_sta.sta_id;
cmd->tx_cmd.life_time = cpu_to_le32(TX_CMD_LIFE_TIME_INFINITE);
cmd->tx_cmd.rate_n_flags =
SCAN_COMPLETE_NOTIFICATION };
int ret;
- if (mvm->scan_status == IWL_MVM_SCAN_NONE)
- return 0;
-
- if (iwl_mvm_is_radio_killed(mvm)) {
- ieee80211_scan_completed(mvm->hw, true);
- iwl_mvm_unref(mvm, IWL_MVM_REF_SCAN);
- mvm->scan_status = IWL_MVM_SCAN_NONE;
- return 0;
- }
-
iwl_init_notification_wait(&mvm->notif_wait, &wait_scan_abort,
scan_abort_notif,
ARRAY_SIZE(scan_abort_notif),
int iwl_mvm_cancel_scan(struct iwl_mvm *mvm)
{
+ if (mvm->scan_status == IWL_MVM_SCAN_NONE)
+ return 0;
+
+ if (iwl_mvm_is_radio_killed(mvm)) {
+ ieee80211_scan_completed(mvm->hw, true);
+ iwl_mvm_unref(mvm, IWL_MVM_REF_SCAN);
+ mvm->scan_status = IWL_MVM_SCAN_NONE;
+ return 0;
+ }
+
if (mvm->fw->ucode_capa.api[0] & IWL_UCODE_TLV_API_LMAC_SCAN)
return iwl_mvm_scan_offload_stop(mvm, true);
return iwl_mvm_cancel_regular_scan(mvm);
te_data->running = false;
te_data->vif = NULL;
te_data->uid = 0;
+ te_data->id = TE_MAX;
} else if (le32_to_cpu(notif->action) == TE_V2_NOTIF_HOST_EVENT_START) {
- set_bit(IWL_MVM_STATUS_ROC_RUNNING, &mvm->status);
set_bit(IWL_MVM_STATUS_ROC_AUX_RUNNING, &mvm->status);
te_data->running = true;
ieee80211_ready_on_channel(mvm->hw); /* Start TE */
/*
* for data packets, rate info comes from the table inside the fw. This
- * table is controlled by LINK_QUALITY commands. Exclude ctrl port
- * frames like EAPOLs which should be treated as mgmt frames. This
- * avoids them being sent initially in high rates which increases the
- * chances for completion of the 4-Way handshake.
+ * table is controlled by LINK_QUALITY commands
*/
- if (ieee80211_is_data(fc) && sta &&
- !(info->control.flags & IEEE80211_TX_CTRL_PORT_CTRL_PROTO)) {
+ if (ieee80211_is_data(fc) && sta) {
tx_cmd->initial_rate_index = 0;
tx_cmd->tx_flags |= cpu_to_le32(TX_CMD_FLG_STA_RATE);
return;
{
struct iwl_trans_pcie *trans_pcie = IWL_TRANS_GET_PCIE_TRANS(trans);
u16 lctl;
+ u16 cap;
/*
* HW bug W/A for instability in PCIe bus L0S->L1 transition.
* power savings, even without L1.
*/
pcie_capability_read_word(trans_pcie->pci_dev, PCI_EXP_LNKCTL, &lctl);
- if (lctl & PCI_EXP_LNKCTL_ASPM_L1) {
- /* L1-ASPM enabled; disable(!) L0S */
+ if (lctl & PCI_EXP_LNKCTL_ASPM_L1)
iwl_set_bit(trans, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
- dev_info(trans->dev, "L1 Enabled; Disabling L0S\n");
- } else {
- /* L1-ASPM disabled; enable(!) L0S */
+ else
iwl_clear_bit(trans, CSR_GIO_REG, CSR_GIO_REG_VAL_L0S_ENABLED);
- dev_info(trans->dev, "L1 Disabled; Enabling L0S\n");
- }
trans->pm_support = !(lctl & PCI_EXP_LNKCTL_ASPM_L0S);
+
+ pcie_capability_read_word(trans_pcie->pci_dev, PCI_EXP_DEVCTL2, &cap);
+ trans->ltr_enabled = cap & PCI_EXP_DEVCTL2_LTR_EN;
+ dev_info(trans->dev, "L1 %sabled - LTR %sabled\n",
+ (lctl & PCI_EXP_LNKCTL_ASPM_L1) ? "En" : "Dis",
+ trans->ltr_enabled ? "En" : "Dis");
}
/*
ret = iwl_poll_bit(trans, CSR_RESET,
CSR_RESET_REG_FLAG_MASTER_DISABLED,
CSR_RESET_REG_FLAG_MASTER_DISABLED, 100);
- if (ret)
+ if (ret < 0)
IWL_WARN(trans, "Master Disable Timed Out, 100 usec\n");
IWL_DEBUG_INFO(trans, "stop master\n");
msleep(25);
}
- IWL_DEBUG_INFO(trans, "got NIC after %d iterations\n", iter);
+ IWL_ERR(trans, "Couldn't prepare the card\n");
return ret;
}
* restart. So don't process again if the device is
* already dead.
*/
- if (test_bit(STATUS_DEVICE_ENABLED, &trans->status)) {
+ if (test_and_clear_bit(STATUS_DEVICE_ENABLED, &trans->status)) {
+ IWL_DEBUG_INFO(trans, "DEVICE_ENABLED bit was set and is now cleared\n");
iwl_pcie_tx_stop(trans);
iwl_pcie_rx_stop(trans);
/* clear all status bits */
clear_bit(STATUS_SYNC_HCMD_ACTIVE, &trans->status);
clear_bit(STATUS_INT_ENABLED, &trans->status);
- clear_bit(STATUS_DEVICE_ENABLED, &trans->status);
clear_bit(STATUS_TPOWER_PMI, &trans->status);
clear_bit(STATUS_RFKILL, &trans->status);
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
CSR_GP_CNTRL_REG_FLAG_MAC_CLOCK_READY,
25000);
- if (ret) {
+ if (ret < 0) {
IWL_ERR(trans, "Failed to resume the device (mac ready)\n");
return ret;
}
int reg;
__le32 *val;
- prph_len += sizeof(*data) + sizeof(*prph) +
- num_bytes_in_chunk;
+ prph_len += sizeof(**data) + sizeof(*prph) + num_bytes_in_chunk;
(*data)->type = cpu_to_le32(IWL_FW_ERROR_DUMP_PRPH);
(*data)->len = cpu_to_le32(sizeof(*prph) +
if (err != 0) {
printk(KERN_DEBUG "mac80211_hwsim: device_bind_driver failed (%d)\n",
err);
- goto failed_hw;
+ goto failed_bind;
}
skb_queue_head_init(&data->pending);
return idx;
failed_hw:
+ device_release_driver(data->dev);
+failed_bind:
device_unregister(data->dev);
failed_drvdata:
ieee80211_free_hw(hw);
mwifiex_11n_dispatch_pkt_until_start_win(priv, tbl, start_win);
del_timer_sync(&tbl->timer_context.timer);
+ tbl->timer_context.timer_is_set = false;
spin_lock_irqsave(&priv->rx_reorder_tbl_lock, flags);
list_del(&tbl->list);
(struct reorder_tmr_cnxt *) context;
int start_win, seq_num;
+ ctx->timer_is_set = false;
seq_num = mwifiex_11n_find_last_seq_num(ctx);
if (seq_num < 0)
new_node->timer_context.ptr = new_node;
new_node->timer_context.priv = priv;
+ new_node->timer_context.timer_is_set = false;
init_timer(&new_node->timer_context.timer);
new_node->timer_context.timer.function = mwifiex_flush_data;
spin_unlock_irqrestore(&priv->rx_reorder_tbl_lock, flags);
}
+static void
+mwifiex_11n_rxreorder_timer_restart(struct mwifiex_rx_reorder_tbl *tbl)
+{
+ u32 min_flush_time;
+
+ if (tbl->win_size >= MWIFIEX_BA_WIN_SIZE_32)
+ min_flush_time = MIN_FLUSH_TIMER_15_MS;
+ else
+ min_flush_time = MIN_FLUSH_TIMER_MS;
+
+ mod_timer(&tbl->timer_context.timer,
+ jiffies + msecs_to_jiffies(min_flush_time * tbl->win_size));
+
+ tbl->timer_context.timer_is_set = true;
+}
+
/*
* This function prepares command for adding a BA request.
*
u8 *ta, u8 pkt_type, void *payload)
{
struct mwifiex_rx_reorder_tbl *tbl;
- int start_win, end_win, win_size;
+ int prev_start_win, start_win, end_win, win_size;
u16 pkt_index;
bool init_window_shift = false;
+ int ret = 0;
tbl = mwifiex_11n_get_rx_reorder_tbl(priv, tid, ta);
if (!tbl) {
if (pkt_type != PKT_TYPE_BAR)
mwifiex_11n_dispatch_pkt(priv, payload);
- return 0;
+ return ret;
}
if ((pkt_type == PKT_TYPE_AMSDU) && !tbl->amsdu) {
mwifiex_11n_dispatch_pkt(priv, payload);
- return 0;
+ return ret;
}
start_win = tbl->start_win;
+ prev_start_win = start_win;
win_size = tbl->win_size;
end_win = ((start_win + win_size) - 1) & (MAX_TID_VALUE - 1);
if (tbl->flags & RXREOR_INIT_WINDOW_SHIFT) {
init_window_shift = true;
tbl->flags &= ~RXREOR_INIT_WINDOW_SHIFT;
}
- mod_timer(&tbl->timer_context.timer,
- jiffies + msecs_to_jiffies(MIN_FLUSH_TIMER_MS * win_size));
if (tbl->flags & RXREOR_FORCE_NO_DROP) {
dev_dbg(priv->adapter->dev,
if ((start_win + TWOPOW11) > (MAX_TID_VALUE - 1)) {
if (seq_num >= ((start_win + TWOPOW11) &
(MAX_TID_VALUE - 1)) &&
- seq_num < start_win)
- return -1;
+ seq_num < start_win) {
+ ret = -1;
+ goto done;
+ }
} else if ((seq_num < start_win) ||
- (seq_num > (start_win + TWOPOW11))) {
- return -1;
+ (seq_num >= (start_win + TWOPOW11))) {
+ ret = -1;
+ goto done;
}
}
else
pkt_index = (seq_num+MAX_TID_VALUE) - start_win;
- if (tbl->rx_reorder_ptr[pkt_index])
- return -1;
+ if (tbl->rx_reorder_ptr[pkt_index]) {
+ ret = -1;
+ goto done;
+ }
tbl->rx_reorder_ptr[pkt_index] = payload;
}
*/
mwifiex_11n_scan_and_dispatch(priv, tbl);
- return 0;
+done:
+ if (!tbl->timer_context.timer_is_set ||
+ prev_start_win != tbl->start_win)
+ mwifiex_11n_rxreorder_timer_restart(tbl);
+ return ret;
}
/*
#define _MWIFIEX_11N_RXREORDER_H_
#define MIN_FLUSH_TIMER_MS 50
+#define MIN_FLUSH_TIMER_15_MS 15
+#define MWIFIEX_BA_WIN_SIZE_32 32
#define PKT_TYPE_BAR 0xE7
#define MAX_TID_VALUE (2 << 11)
struct timer_list timer;
struct mwifiex_rx_reorder_tbl *ptr;
struct mwifiex_private *priv;
+ u8 timer_is_set;
};
struct mwifiex_rx_reorder_tbl {
/* Ovislink */
{ USB_DEVICE(0x1b75, 0x3071) },
{ USB_DEVICE(0x1b75, 0x3072) },
+ { USB_DEVICE(0x1b75, 0xa200) },
/* Para */
{ USB_DEVICE(0x20b8, 0x8888) },
/* Pegatron */
skb_trim(skb, frame_length);
}
-void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int header_length)
+/*
+ * H/W needs L2 padding between the header and the paylod if header size
+ * is not 4 bytes aligned.
+ */
+void rt2x00queue_insert_l2pad(struct sk_buff *skb, unsigned int hdr_len)
{
- unsigned int payload_length = skb->len - header_length;
- unsigned int header_align = ALIGN_SIZE(skb, 0);
- unsigned int payload_align = ALIGN_SIZE(skb, header_length);
- unsigned int l2pad = payload_length ? L2PAD_SIZE(header_length) : 0;
+ unsigned int l2pad = (skb->len > hdr_len) ? L2PAD_SIZE(hdr_len) : 0;
- /*
- * Adjust the header alignment if the payload needs to be moved more
- * than the header.
- */
- if (payload_align > header_align)
- header_align += 4;
-
- /* There is nothing to do if no alignment is needed */
- if (!header_align)
+ if (!l2pad)
return;
- /* Reserve the amount of space needed in front of the frame */
- skb_push(skb, header_align);
-
- /*
- * Move the header.
- */
- memmove(skb->data, skb->data + header_align, header_length);
-
- /* Move the payload, if present and if required */
- if (payload_length && payload_align)
- memmove(skb->data + header_length + l2pad,
- skb->data + header_length + l2pad + payload_align,
- payload_length);
-
- /* Trim the skb to the correct size */
- skb_trim(skb, header_length + l2pad + payload_length);
+ skb_push(skb, l2pad);
+ memmove(skb->data, skb->data + l2pad, hdr_len);
}
-void rt2x00queue_remove_l2pad(struct sk_buff *skb, unsigned int header_length)
+void rt2x00queue_remove_l2pad(struct sk_buff *skb, unsigned int hdr_len)
{
- /*
- * L2 padding is only present if the skb contains more than just the
- * IEEE 802.11 header.
- */
- unsigned int l2pad = (skb->len > header_length) ?
- L2PAD_SIZE(header_length) : 0;
+ unsigned int l2pad = (skb->len > hdr_len) ? L2PAD_SIZE(hdr_len) : 0;
if (!l2pad)
return;
- memmove(skb->data + l2pad, skb->data, header_length);
+ memmove(skb->data + l2pad, skb->data, hdr_len);
skb_pull(skb, l2pad);
}
rtl_easy_concurrent_retrytimer_callback, (unsigned long)hw);
/* <2> work queue */
rtlpriv->works.hw = hw;
- rtlpriv->works.rtl_wq = alloc_workqueue(rtlpriv->cfg->name, 0, 0);
+ rtlpriv->works.rtl_wq = alloc_workqueue("%s", 0, 0, rtlpriv->cfg->name);
INIT_DELAYED_WORK(&rtlpriv->works.watchdog_wq,
(void *)rtl_watchdog_wq_callback);
INIT_DELAYED_WORK(&rtlpriv->works.ips_nic_off_wq,
.flush = rtl_op_flush,
};
EXPORT_SYMBOL_GPL(rtl_ops);
+
+bool rtl_btc_status_false(void)
+{
+ return false;
+}
+EXPORT_SYMBOL_GPL(rtl_btc_status_false);
u32 mask, u32 data);
void rtl_bb_delay(struct ieee80211_hw *hw, u32 addr, u32 data);
bool rtl_cmd_send_packet(struct ieee80211_hw *hw, struct sk_buff *skb);
+bool rtl_btc_status_false(void);
#endif
break;
}
/* handle command packet here */
- if (rtlpriv->cfg->ops->rx_command_packet(hw, stats, skb)) {
+ if (rtlpriv->cfg->ops->rx_command_packet &&
+ rtlpriv->cfg->ops->rx_command_packet(hw, stats, skb)) {
dev_kfree_skb_any(skb);
goto end;
}
__skb_queue_tail(&ring->queue, pskb);
- rtlpriv->cfg->ops->set_desc(hw, (u8 *)pdesc, true, HW_DESC_OWN,
- &temp_one);
-
+ if (rtlpriv->use_new_trx_flow) {
+ temp_one = 4;
+ rtlpriv->cfg->ops->set_desc(hw, (u8 *)pbuffer_desc, true,
+ HW_DESC_OWN, (u8 *)&temp_one);
+ } else {
+ rtlpriv->cfg->ops->set_desc(hw, (u8 *)pdesc, true, HW_DESC_OWN,
+ &temp_one);
+ }
return;
}
ring->desc = NULL;
if (rtlpriv->use_new_trx_flow) {
pci_free_consistent(rtlpci->pdev,
- sizeof(*ring->desc) * ring->entries,
+ sizeof(*ring->buffer_desc) * ring->entries,
ring->buffer_desc, ring->buffer_desc_dma);
- ring->desc = NULL;
+ ring->buffer_desc = NULL;
}
}
true,
HW_DESC_TXBUFF_ADDR),
skb->len, PCI_DMA_TODEVICE);
- ring->idx = (ring->idx + 1) % ring->entries;
kfree_skb(skb);
ring->idx = (ring->idx + 1) % ring->entries;
}
rtl_pci_reset_trx_ring(hw);
rtlpci->driver_is_goingto_unload = false;
- if (rtlpriv->cfg->ops->get_btc_status()) {
+ if (rtlpriv->cfg->ops->get_btc_status &&
+ rtlpriv->cfg->ops->get_btc_status()) {
rtlpriv->btcoexist.btc_ops->btc_init_variables(rtlpriv);
rtlpriv->btcoexist.btc_ops->btc_init_hal_vars(rtlpriv);
}
/*like read eeprom and so on */
rtlpriv->cfg->ops->read_eeprom_info(hw);
+ if (rtlpriv->cfg->ops->init_sw_vars(hw)) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Can't init_sw_vars\n");
+ err = -ENODEV;
+ goto fail3;
+ }
+ rtlpriv->cfg->ops->init_sw_leds(hw);
+
+ /*aspm */
+ rtl_pci_init_aspm(hw);
+
/* Init mac80211 sw */
err = rtl_init_core(hw);
if (err) {
goto fail3;
}
- if (rtlpriv->cfg->ops->init_sw_vars(hw)) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Can't init_sw_vars\n");
- err = -ENODEV;
- goto fail3;
- }
- rtlpriv->cfg->ops->init_sw_leds(hw);
-
- /*aspm */
- rtl_pci_init_aspm(hw);
-
err = ieee80211_register_hw(hw);
if (err) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
};
-void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool b_dl_finished)
+void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw,
+ bool (*cmd_send_packet)(struct ieee80211_hw *, struct sk_buff *))
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
memcpy((u8 *)skb_put(skb, totalpacketlen),
&reserved_page_packet, totalpacketlen);
- rtstatus = rtl_cmd_send_packet(hw, skb);
+ if (cmd_send_packet)
+ rtstatus = cmd_send_packet(hw, skb);
+ else
+ rtstatus = rtl_cmd_send_packet(hw, skb);
if (rtstatus)
b_dlok = true;
u32 cmd_len, u8 *p_cmdbuffer);
void rtl92c_firmware_selfreset(struct ieee80211_hw *hw);
void rtl92c_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode);
-void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool b_dl_finished);
+void rtl92c_set_fw_rsvdpagepkt
+ (struct ieee80211_hw *hw,
+ bool (*cmd_send_packet)(struct ieee80211_hw *, struct sk_buff *));
void rtl92c_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw, u8 mstatus);
void usb_writeN_async(struct rtl_priv *rtlpriv, u32 addr, void *data, u16 len);
void rtl92c_set_p2p_ps_offload_cmd(struct ieee80211_hw *hw, u8 p2p_ps_state);
LE_BITS_TO_4BYTE(((__pcmdfbhdr) + 4), 16, 4)
#define GET_C2H_CMD_FEEDBACK_CCX_SEQ(__pcmdfbhdr) \
LE_BITS_TO_4BYTE(((__pcmdfbhdr) + 4), 20, 12)
+#define GET_RX_STATUS_DESC_BUFF_ADDR(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 24, 0, 32)
#define CHIP_VER_B BIT(4)
#define CHIP_BONDING_IDENTIFIER(_value) (((_value) >> 22) & 0x3)
rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2,
tmp_reg422 & (~BIT(6)));
- rtl92c_set_fw_rsvdpagepkt(hw, 0);
+ rtl92c_set_fw_rsvdpagepkt(hw, NULL);
_rtl92ce_set_bcn_ctrl_reg(hw, BIT(3), 0);
_rtl92ce_set_bcn_ctrl_reg(hw, 0, BIT(4));
.phy_lc_calibrate = _rtl92ce_phy_lc_calibrate,
.phy_set_bw_mode_callback = rtl92ce_phy_set_bw_mode_callback,
.dm_dynamic_txpower = rtl92ce_dm_dynamic_txpower,
+ .get_btc_status = rtl_btc_status_false,
};
static struct rtl_mod_params rtl92ce_mod_params = {
case HW_DESC_RXPKT_LEN:
ret = GET_RX_DESC_PKT_LEN(pdesc);
break;
+ case HW_DESC_RXBUFF_ADDR:
+ ret = GET_RX_STATUS_DESC_BUFF_ADDR(pdesc);
+ break;
default:
RT_ASSERT(false, "ERR rxdesc :%d not process\n",
desc_name);
}
}
+bool usb_cmd_send_packet(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+ /* Currently nothing happens here.
+ * Traffic stops after some seconds in WPA2 802.11n mode.
+ * Maybe because rtl8192cu chip should be set from here?
+ * If I understand correctly, the realtek vendor driver sends some urbs
+ * if its "here".
+ *
+ * This is maybe necessary:
+ * rtlpriv->cfg->ops->fill_tx_cmddesc(hw, buffer, 1, 1, skb);
+ */
+ return true;
+}
+
void rtl92cu_set_hw_reg(struct ieee80211_hw *hw, u8 variable, u8 *val)
{
struct rtl_priv *rtlpriv = rtl_priv(hw);
recover = true;
rtl_write_byte(rtlpriv, REG_FWHW_TXQ_CTRL + 2,
tmp_reg422 & (~BIT(6)));
- rtl92c_set_fw_rsvdpagepkt(hw, 0);
+ rtl92c_set_fw_rsvdpagepkt(hw,
+ &usb_cmd_send_packet);
_rtl92cu_set_bcn_ctrl_reg(hw, BIT(3), 0);
_rtl92cu_set_bcn_ctrl_reg(hw, 0, BIT(4));
if (recover)
void rtl92cu_set_check_bssid(struct ieee80211_hw *hw, bool check_bssid);
int rtl92c_download_fw(struct ieee80211_hw *hw);
void rtl92c_set_fw_pwrmode_cmd(struct ieee80211_hw *hw, u8 mode);
-void rtl92c_set_fw_rsvdpagepkt(struct ieee80211_hw *hw, bool dl_finished);
void rtl92c_set_fw_joinbss_report_cmd(struct ieee80211_hw *hw, u8 mstatus);
void rtl92c_fill_h2c_cmd(struct ieee80211_hw *hw,
u8 element_id, u32 cmd_len, u8 *p_cmdbuffer);
}
}
+/* get bt coexist status */
+static bool rtl92cu_get_btc_status(void)
+{
+ return false;
+}
+
static struct rtl_hal_ops rtl8192cu_hal_ops = {
.init_sw_vars = rtl92cu_init_sw_vars,
.deinit_sw_vars = rtl92cu_deinit_sw_vars,
.phy_set_bw_mode_callback = rtl92cu_phy_set_bw_mode_callback,
.dm_dynamic_txpower = rtl92cu_dm_dynamic_txpower,
.fill_h2c_cmd = rtl92c_fill_h2c_cmd,
+ .get_btc_status = rtl92cu_get_btc_status,
};
static struct rtl_mod_params rtl92cu_mod_params = {
.get_rfreg = rtl92d_phy_query_rf_reg,
.set_rfreg = rtl92d_phy_set_rf_reg,
.linked_set_reg = rtl92d_linked_set_reg,
+ .get_btc_status = rtl_btc_status_false,
};
static struct rtl_mod_params rtl92de_mod_params = {
}
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_DMESG,
"switch case not process %x\n", variable);
break;
}
acm_ctrl &= (~ACMHW_BEQEN);
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_DMESG,
"switch case not process\n");
break;
}
}
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_DMESG,
"switch case not process %x\n", variable);
break;
}
enc_algo = CAM_AES;
break;
default:
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_DMESG,
"switch case not process\n");
enc_algo = CAM_TKIP;
break;
/* DWORD 6 */
#define SET_RX_STATUS__DESC_BUFF_ADDR(__pdesc, __val) \
SET_BITS_OFFSET_LE(__pdesc + 24, 0, 32, __val)
+#define GET_RX_STATUS_DESC_BUFF_ADDR(__pdesc) \
+ SHIFT_AND_MASK_LE(__pdesc + 24, 0, 32)
#define SE_RX_HAL_IS_CCK_RATE(_pdesc)\
(GET_RX_STATUS_DESC_RX_MCS(_pdesc) == DESC92_RATE1M || \
}
+ if (type != NL80211_IFTYPE_AP &&
+ rtlpriv->mac80211.link_state < MAC80211_LINKED)
+ bt_msr = rtl_read_byte(rtlpriv, MSR) & ~MSR_LINK_MASK;
rtl_write_byte(rtlpriv, (MSR), bt_msr);
temp = rtl_read_dword(rtlpriv, TCR);
rtl_write_dword(rtlpriv, INTA_MASK, rtlpci->irq_mask[0]);
/* Support Bit 32-37(Assign as Bit 0-5) interrupt setting now */
rtl_write_dword(rtlpriv, INTA_MASK + 4, rtlpci->irq_mask[1] & 0x3F);
+ rtlpci->irq_enabled = true;
}
void rtl92se_disable_interrupt(struct ieee80211_hw *hw)
rtlpci = rtl_pcidev(rtl_pcipriv(hw));
rtl_write_dword(rtlpriv, INTA_MASK, 0);
rtl_write_dword(rtlpriv, INTA_MASK + 4, 0);
-
- synchronize_irq(rtlpci->pdev->irq);
+ rtlpci->irq_enabled = false;
}
static u8 _rtl92s_set_sysclk(struct ieee80211_hw *hw, u8 data)
case 2:
currentcmd = &postcommoncmd[*step];
break;
+ default:
+ return true;
}
if (currentcmd->cmdid == CMDID_END) {
static void rtl92se_fw_cb(const struct firmware *firmware, void *context)
{
struct ieee80211_hw *hw = context;
- struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw);
struct rtl_priv *rtlpriv = rtl_priv(hw);
- struct rtl_pci *rtlpci = rtl_pcidev(pcipriv);
struct rt_firmware *pfirmware = NULL;
- int err;
RT_TRACE(rtlpriv, COMP_ERR, DBG_LOUD,
"Firmware callback routine entered!\n");
memcpy(pfirmware->sz_fw_tmpbuffer, firmware->data, firmware->size);
pfirmware->sz_fw_tmpbufferlen = firmware->size;
release_firmware(firmware);
-
- err = ieee80211_register_hw(hw);
- if (err) {
- RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
- "Can't register mac80211 hw\n");
- return;
- } else {
- rtlpriv->mac80211.mac80211_registered = 1;
- }
- rtlpci->irq_alloc = 1;
- set_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status);
-
- /*init rfkill */
- rtl_init_rfkill(hw);
}
static int rtl92s_init_sw_vars(struct ieee80211_hw *hw)
if (!rtlpriv->rtlhal.pfirmware)
return 1;
- rtlpriv->max_fw_size = RTL8190_MAX_RAW_FIRMWARE_CODE_SIZE;
-
+ rtlpriv->max_fw_size = RTL8190_MAX_FIRMWARE_CODE_SIZE*2 +
+ sizeof(struct fw_hdr);
pr_info("Driver for Realtek RTL8192SE/RTL8191SE\n"
"Loading firmware %s\n", rtlpriv->cfg->fw_name);
/* request fw */
}
}
+static bool rtl92se_is_tx_desc_closed(struct ieee80211_hw *hw, u8 hw_queue,
+ u16 index)
+{
+ struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw));
+ struct rtl8192_tx_ring *ring = &rtlpci->tx_ring[hw_queue];
+ u8 *entry = (u8 *)(&ring->desc[ring->idx]);
+ u8 own = (u8)rtl92se_get_desc(entry, true, HW_DESC_OWN);
+
+ if (own)
+ return false;
+ return true;
+}
+
static struct rtl_hal_ops rtl8192se_hal_ops = {
.init_sw_vars = rtl92s_init_sw_vars,
.deinit_sw_vars = rtl92s_deinit_sw_vars,
.led_control = rtl92se_led_control,
.set_desc = rtl92se_set_desc,
.get_desc = rtl92se_get_desc,
+ .is_tx_desc_closed = rtl92se_is_tx_desc_closed,
.tx_polling = rtl92se_tx_polling,
.enable_hw_sec = rtl92se_enable_hw_security_config,
.set_key = rtl92se_set_key,
.set_bbreg = rtl92s_phy_set_bb_reg,
.get_rfreg = rtl92s_phy_query_rf_reg,
.set_rfreg = rtl92s_phy_set_rf_reg,
+ .get_btc_status = rtl_btc_status_false,
};
static struct rtl_mod_params rtl92se_mod_params = {
.maps[MAC_RCR_ACRC32] = RCR_ACRC32,
.maps[MAC_RCR_ACF] = RCR_ACF,
.maps[MAC_RCR_AAP] = RCR_AAP,
+ .maps[MAC_HIMR] = INTA_MASK,
+ .maps[MAC_HIMRE] = INTA_MASK + 4,
.maps[EFUSE_TEST] = REG_EFUSE_TEST,
.maps[EFUSE_CTRL] = REG_EFUSE_CTRL,
case HW_DESC_RXPKT_LEN:
ret = GET_RX_STATUS_DESC_PKT_LEN(desc);
break;
+ case HW_DESC_RXBUFF_ADDR:
+ ret = GET_RX_STATUS_DESC_BUFF_ADDR(desc);
+ break;
default:
RT_ASSERT(false, "ERR rxdesc :%d not process\n",
desc_name);
mac->opmode == NL80211_IFTYPE_ADHOC)
macid = sta->aid + 1;
if (wirelessmode == WIRELESS_MODE_N_5G ||
- wirelessmode == WIRELESS_MODE_AC_5G)
- ratr_bitmap = sta->supp_rates[NL80211_BAND_5GHZ];
+ wirelessmode == WIRELESS_MODE_AC_5G ||
+ wirelessmode == WIRELESS_MODE_A)
+ ratr_bitmap = sta->supp_rates[NL80211_BAND_5GHZ] << 4;
else
ratr_bitmap = sta->supp_rates[NL80211_BAND_2GHZ];
struct rtl_phy *rtlphy = &rtlpriv->phy;
u8 rate_section = _rtl8821ae_get_rate_section_index(regaddr);
- if (band != BAND_ON_2_4G && band != BAND_ON_5G)
+ if (band != BAND_ON_2_4G && band != BAND_ON_5G) {
RT_TRACE(rtlpriv, COMP_INIT, DBG_WARNING, "Invalid Band %d\n", band);
-
- if (rfpath >= MAX_RF_PATH)
+ band = BAND_ON_2_4G;
+ }
+ if (rfpath >= MAX_RF_PATH) {
RT_TRACE(rtlpriv, COMP_INIT, DBG_WARNING, "Invalid RfPath %d\n", rfpath);
-
- if (txnum >= MAX_RF_PATH)
+ rfpath = MAX_RF_PATH - 1;
+ }
+ if (txnum >= MAX_RF_PATH) {
RT_TRACE(rtlpriv, COMP_INIT, DBG_WARNING, "Invalid TxNum %d\n", txnum);
-
+ txnum = MAX_RF_PATH - 1;
+ }
rtlphy->tx_power_by_rate_offset[band][rfpath][txnum][rate_section] = data;
RT_TRACE(rtlpriv, COMP_INIT, DBG_LOUD,
"TxPwrByRateOffset[Band %d][RfPath %d][TxNum %d][RateSection %d] = 0x%x\n",
}
rtlpriv->cfg->ops->init_sw_leds(hw);
+ err = ieee80211_register_hw(hw);
+ if (err) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ "Can't register mac80211 hw.\n");
+ err = -ENODEV;
+ goto error_out;
+ }
+ rtlpriv->mac80211.mac80211_registered = 1;
+
+ set_bit(RTL_STATUS_INTERFACE_START, &rtlpriv->status);
return 0;
+
error_out:
rtl_deinit_core(hw);
_rtl_usb_io_handler_release(hw);
char rx_irq_name[IRQ_NAME_SIZE]; /* DEVNAME-qN-rx */
struct xen_netif_rx_back_ring rx;
struct sk_buff_head rx_queue;
- RING_IDX rx_last_skb_slots;
- unsigned long status;
- struct timer_list rx_stalled;
+ unsigned int rx_queue_max;
+ unsigned int rx_queue_len;
+ unsigned long last_rx_time;
+ bool stalled;
struct gnttab_copy grant_copy_op[MAX_GRANT_COPY_OPS];
struct xenvif_stats stats;
};
+/* Maximum number of Rx slots a to-guest packet may use, including the
+ * slot needed for GSO meta-data.
+ */
+#define XEN_NETBK_RX_SLOTS_MAX (MAX_SKB_FRAGS + 1)
+
enum state_bit_shift {
/* This bit marks that the vif is connected */
VIF_STATUS_CONNECTED,
- /* This bit signals the RX thread that queuing was stopped (in
- * start_xmit), and either the timer fired or an RX interrupt came
- */
- QUEUE_STATUS_RX_PURGE_EVENT,
- /* This bit tells the interrupt handler that this queue was the reason
- * for the carrier off, so it should kick the thread. Only queues which
- * brought it down can turn on the carrier.
- */
- QUEUE_STATUS_RX_STALLED
};
struct xenvif {
u8 ip_csum:1;
u8 ipv6_csum:1;
- /* Internal feature information. */
- u8 can_queue:1; /* can queue packets for receiver? */
-
/* Is this interface disabled? True when backend discovers
* frontend is rogue.
*/
/* Queues */
struct xenvif_queue *queues;
unsigned int num_queues; /* active queues, resource allocated */
+ unsigned int stalled_queues;
+
+ spinlock_t lock;
#ifdef CONFIG_DEBUG_FS
struct dentry *xenvif_dbg_root;
struct net_device *dev;
};
+struct xenvif_rx_cb {
+ unsigned long expires;
+ int meta_slots_used;
+ bool full_coalesce;
+};
+
+#define XENVIF_RX_CB(skb) ((struct xenvif_rx_cb *)(skb)->cb)
+
static inline struct xenbus_device *xenvif_to_xenbus_device(struct xenvif *vif)
{
return to_xenbus_device(vif->dev->dev.parent);
int xenvif_schedulable(struct xenvif *vif);
-int xenvif_must_stop_queue(struct xenvif_queue *queue);
-
int xenvif_queue_stopped(struct xenvif_queue *queue);
void xenvif_wake_queue(struct xenvif_queue *queue);
int xenvif_dealloc_kthread(void *data);
+void xenvif_rx_queue_tail(struct xenvif_queue *queue, struct sk_buff *skb);
+
/* Determine whether the needed number of slots (req) are available,
* and set req_event if not.
*/
#define XENVIF_QUEUE_LENGTH 32
#define XENVIF_NAPI_WEIGHT 64
+/* Number of bytes allowed on the internal guest Rx queue. */
+#define XENVIF_RX_QUEUE_BYTES (XEN_NETIF_RX_RING_SIZE/2 * PAGE_SIZE)
+
/* This function is used to set SKBTX_DEV_ZEROCOPY as well as
* increasing the inflight counter. We need to increase the inflight
* counter because core driver calls into xenvif_zerocopy_callback
atomic_dec(&queue->inflight_packets);
}
-static inline void xenvif_stop_queue(struct xenvif_queue *queue)
-{
- struct net_device *dev = queue->vif->dev;
-
- if (!queue->vif->can_queue)
- return;
-
- netif_tx_stop_queue(netdev_get_tx_queue(dev, queue->id));
-}
-
int xenvif_schedulable(struct xenvif *vif)
{
return netif_running(vif->dev) &&
- test_bit(VIF_STATUS_CONNECTED, &vif->status);
+ test_bit(VIF_STATUS_CONNECTED, &vif->status) &&
+ !vif->disabled;
}
static irqreturn_t xenvif_tx_interrupt(int irq, void *dev_id)
static irqreturn_t xenvif_rx_interrupt(int irq, void *dev_id)
{
struct xenvif_queue *queue = dev_id;
- struct netdev_queue *net_queue =
- netdev_get_tx_queue(queue->vif->dev, queue->id);
- /* QUEUE_STATUS_RX_PURGE_EVENT is only set if either QDisc was off OR
- * the carrier went down and this queue was previously blocked
- */
- if (unlikely(netif_tx_queue_stopped(net_queue) ||
- (!netif_carrier_ok(queue->vif->dev) &&
- test_bit(QUEUE_STATUS_RX_STALLED, &queue->status))))
- set_bit(QUEUE_STATUS_RX_PURGE_EVENT, &queue->status);
xenvif_kick_thread(queue);
return IRQ_HANDLED;
netif_tx_wake_queue(netdev_get_tx_queue(dev, id));
}
-/* Callback to wake the queue's thread and turn the carrier off on timeout */
-static void xenvif_rx_stalled(unsigned long data)
-{
- struct xenvif_queue *queue = (struct xenvif_queue *)data;
-
- if (xenvif_queue_stopped(queue)) {
- set_bit(QUEUE_STATUS_RX_PURGE_EVENT, &queue->status);
- xenvif_kick_thread(queue);
- }
-}
-
static int xenvif_start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct xenvif *vif = netdev_priv(dev);
struct xenvif_queue *queue = NULL;
unsigned int num_queues = vif->num_queues;
u16 index;
- int min_slots_needed;
+ struct xenvif_rx_cb *cb;
BUG_ON(skb->dev != dev);
!xenvif_schedulable(vif))
goto drop;
- /* At best we'll need one slot for the header and one for each
- * frag.
- */
- min_slots_needed = 1 + skb_shinfo(skb)->nr_frags;
-
- /* If the skb is GSO then we'll also need an extra slot for the
- * metadata.
- */
- if (skb_is_gso(skb))
- min_slots_needed++;
+ cb = XENVIF_RX_CB(skb);
+ cb->expires = jiffies + rx_drain_timeout_jiffies;
- /* If the skb can't possibly fit in the remaining slots
- * then turn off the queue to give the ring a chance to
- * drain.
- */
- if (!xenvif_rx_ring_slots_available(queue, min_slots_needed)) {
- queue->rx_stalled.function = xenvif_rx_stalled;
- queue->rx_stalled.data = (unsigned long)queue;
- xenvif_stop_queue(queue);
- mod_timer(&queue->rx_stalled,
- jiffies + rx_drain_timeout_jiffies);
- }
-
- skb_queue_tail(&queue->rx_queue, skb);
+ xenvif_rx_queue_tail(queue, skb);
xenvif_kick_thread(queue);
return NETDEV_TX_OK;
vif->queues = NULL;
vif->num_queues = 0;
+ spin_lock_init(&vif->lock);
+
dev->netdev_ops = &xenvif_netdev_ops;
dev->hw_features = NETIF_F_SG |
NETIF_F_IP_CSUM | NETIF_F_IPV6_CSUM |
init_timer(&queue->credit_timeout);
queue->credit_window_start = get_jiffies_64();
+ queue->rx_queue_max = XENVIF_RX_QUEUE_BYTES;
+
skb_queue_head_init(&queue->rx_queue);
skb_queue_head_init(&queue->tx_queue);
queue->grant_tx_handle[i] = NETBACK_INVALID_HANDLE;
}
- init_timer(&queue->rx_stalled);
-
return 0;
}
dev_set_mtu(vif->dev, ETH_DATA_LEN);
netdev_update_features(vif->dev);
set_bit(VIF_STATUS_CONNECTED, &vif->status);
- netif_carrier_on(vif->dev);
if (netif_running(vif->dev))
xenvif_up(vif);
rtnl_unlock();
disable_irq(queue->rx_irq);
}
+ queue->stalled = true;
+
task = kthread_create(xenvif_kthread_guest_rx,
(void *)queue, "%s-guest-rx", queue->name);
if (IS_ERR(task)) {
netif_napi_del(&queue->napi);
if (queue->task) {
- del_timer_sync(&queue->rx_stalled);
kthread_stop(queue->task);
queue->task = NULL;
}
bool separate_tx_rx_irq = 1;
module_param(separate_tx_rx_irq, bool, 0644);
-/* When guest ring is filled up, qdisc queues the packets for us, but we have
- * to timeout them, otherwise other guests' packets can get stuck there
+/* The time that packets can stay on the guest Rx internal queue
+ * before they are dropped.
*/
unsigned int rx_drain_timeout_msecs = 10000;
module_param(rx_drain_timeout_msecs, uint, 0444);
unsigned int rx_drain_timeout_jiffies;
+/* The length of time before the frontend is considered unresponsive
+ * because it isn't providing Rx slots.
+ */
+static unsigned int rx_stall_timeout_msecs = 60000;
+module_param(rx_stall_timeout_msecs, uint, 0444);
+static unsigned int rx_stall_timeout_jiffies;
+
unsigned int xenvif_max_queues;
module_param_named(max_queues, xenvif_max_queues, uint, 0644);
MODULE_PARM_DESC(max_queues,
s8 st);
static inline int tx_work_todo(struct xenvif_queue *queue);
-static inline int rx_work_todo(struct xenvif_queue *queue);
static struct xen_netif_rx_response *make_rx_response(struct xenvif_queue *queue,
u16 id,
return false;
}
+void xenvif_rx_queue_tail(struct xenvif_queue *queue, struct sk_buff *skb)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&queue->rx_queue.lock, flags);
+
+ __skb_queue_tail(&queue->rx_queue, skb);
+
+ queue->rx_queue_len += skb->len;
+ if (queue->rx_queue_len > queue->rx_queue_max)
+ netif_tx_stop_queue(netdev_get_tx_queue(queue->vif->dev, queue->id));
+
+ spin_unlock_irqrestore(&queue->rx_queue.lock, flags);
+}
+
+static struct sk_buff *xenvif_rx_dequeue(struct xenvif_queue *queue)
+{
+ struct sk_buff *skb;
+
+ spin_lock_irq(&queue->rx_queue.lock);
+
+ skb = __skb_dequeue(&queue->rx_queue);
+ if (skb)
+ queue->rx_queue_len -= skb->len;
+
+ spin_unlock_irq(&queue->rx_queue.lock);
+
+ return skb;
+}
+
+static void xenvif_rx_queue_maybe_wake(struct xenvif_queue *queue)
+{
+ spin_lock_irq(&queue->rx_queue.lock);
+
+ if (queue->rx_queue_len < queue->rx_queue_max)
+ netif_tx_wake_queue(netdev_get_tx_queue(queue->vif->dev, queue->id));
+
+ spin_unlock_irq(&queue->rx_queue.lock);
+}
+
+
+static void xenvif_rx_queue_purge(struct xenvif_queue *queue)
+{
+ struct sk_buff *skb;
+ while ((skb = xenvif_rx_dequeue(queue)) != NULL)
+ kfree_skb(skb);
+}
+
+static void xenvif_rx_queue_drop_expired(struct xenvif_queue *queue)
+{
+ struct sk_buff *skb;
+
+ for(;;) {
+ skb = skb_peek(&queue->rx_queue);
+ if (!skb)
+ break;
+ if (time_before(jiffies, XENVIF_RX_CB(skb)->expires))
+ break;
+ xenvif_rx_dequeue(queue);
+ kfree_skb(skb);
+ }
+}
+
/*
* Returns true if we should start a new receive buffer instead of
* adding 'size' bytes to a buffer which currently contains 'offset'
return meta;
}
-struct xenvif_rx_cb {
- int meta_slots_used;
- bool full_coalesce;
-};
-
-#define XENVIF_RX_CB(skb) ((struct xenvif_rx_cb *)(skb)->cb)
-
/*
* Set up the grant operations for this fragment. If it's a flipping
* interface, we also set up the unmap request from here.
skb_queue_head_init(&rxq);
- while ((skb = skb_dequeue(&queue->rx_queue)) != NULL) {
+ while (xenvif_rx_ring_slots_available(queue, XEN_NETBK_RX_SLOTS_MAX)
+ && (skb = xenvif_rx_dequeue(queue)) != NULL) {
RING_IDX max_slots_needed;
RING_IDX old_req_cons;
RING_IDX ring_slots_used;
int i;
+ queue->last_rx_time = jiffies;
+
/* We need a cheap worse case estimate for the number of
* slots we'll use.
*/
skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6))
max_slots_needed++;
- /* If the skb may not fit then bail out now */
- if (!xenvif_rx_ring_slots_available(queue, max_slots_needed)) {
- skb_queue_head(&queue->rx_queue, skb);
- need_to_notify = true;
- queue->rx_last_skb_slots = max_slots_needed;
- break;
- } else
- queue->rx_last_skb_slots = 0;
-
old_req_cons = queue->rx.req_cons;
XENVIF_RX_CB(skb)->meta_slots_used = xenvif_gop_skb(skb, &npo, queue);
ring_slots_used = queue->rx.req_cons - old_req_cons;
}
}
-static inline int rx_work_todo(struct xenvif_queue *queue)
-{
- return (!skb_queue_empty(&queue->rx_queue) &&
- xenvif_rx_ring_slots_available(queue, queue->rx_last_skb_slots));
-}
-
static inline int tx_work_todo(struct xenvif_queue *queue)
{
if (likely(RING_HAS_UNCONSUMED_REQUESTS(&queue->tx)))
return err;
}
-static void xenvif_start_queue(struct xenvif_queue *queue)
+static void xenvif_queue_carrier_off(struct xenvif_queue *queue)
{
- if (xenvif_schedulable(queue->vif))
- xenvif_wake_queue(queue);
+ struct xenvif *vif = queue->vif;
+
+ queue->stalled = true;
+
+ /* At least one queue has stalled? Disable the carrier. */
+ spin_lock(&vif->lock);
+ if (vif->stalled_queues++ == 0) {
+ netdev_info(vif->dev, "Guest Rx stalled");
+ netif_carrier_off(vif->dev);
+ }
+ spin_unlock(&vif->lock);
}
-/* Only called from the queue's thread, it handles the situation when the guest
- * doesn't post enough requests on the receiving ring.
- * First xenvif_start_xmit disables QDisc and start a timer, and then either the
- * timer fires, or the guest send an interrupt after posting new request. If it
- * is the timer, the carrier is turned off here.
- * */
-static void xenvif_rx_purge_event(struct xenvif_queue *queue)
+static void xenvif_queue_carrier_on(struct xenvif_queue *queue)
{
- /* Either the last unsuccesful skb or at least 1 slot should fit */
- int needed = queue->rx_last_skb_slots ?
- queue->rx_last_skb_slots : 1;
+ struct xenvif *vif = queue->vif;
- /* It is assumed that if the guest post new slots after this, the RX
- * interrupt will set the QUEUE_STATUS_RX_PURGE_EVENT bit and wake up
- * the thread again
- */
- set_bit(QUEUE_STATUS_RX_STALLED, &queue->status);
- if (!xenvif_rx_ring_slots_available(queue, needed)) {
- rtnl_lock();
- if (netif_carrier_ok(queue->vif->dev)) {
- /* Timer fired and there are still no slots. Turn off
- * everything except the interrupts
- */
- netif_carrier_off(queue->vif->dev);
- skb_queue_purge(&queue->rx_queue);
- queue->rx_last_skb_slots = 0;
- if (net_ratelimit())
- netdev_err(queue->vif->dev, "Carrier off due to lack of guest response on queue %d\n", queue->id);
- } else {
- /* Probably an another queue already turned the carrier
- * off, make sure nothing is stucked in the internal
- * queue of this queue
- */
- skb_queue_purge(&queue->rx_queue);
- queue->rx_last_skb_slots = 0;
- }
- rtnl_unlock();
- } else if (!netif_carrier_ok(queue->vif->dev)) {
- unsigned int num_queues = queue->vif->num_queues;
- unsigned int i;
- /* The carrier was down, but an interrupt kicked
- * the thread again after new requests were
- * posted
- */
- clear_bit(QUEUE_STATUS_RX_STALLED,
- &queue->status);
- rtnl_lock();
- netif_carrier_on(queue->vif->dev);
- netif_tx_wake_all_queues(queue->vif->dev);
- rtnl_unlock();
+ queue->last_rx_time = jiffies; /* Reset Rx stall detection. */
+ queue->stalled = false;
- for (i = 0; i < num_queues; i++) {
- struct xenvif_queue *temp = &queue->vif->queues[i];
+ /* All queues are ready? Enable the carrier. */
+ spin_lock(&vif->lock);
+ if (--vif->stalled_queues == 0) {
+ netdev_info(vif->dev, "Guest Rx ready");
+ netif_carrier_on(vif->dev);
+ }
+ spin_unlock(&vif->lock);
+}
- xenvif_napi_schedule_or_enable_events(temp);
- }
- if (net_ratelimit())
- netdev_err(queue->vif->dev, "Carrier on again\n");
- } else {
- /* Queuing were stopped, but the guest posted
- * new requests and sent an interrupt
- */
- clear_bit(QUEUE_STATUS_RX_STALLED,
- &queue->status);
- del_timer_sync(&queue->rx_stalled);
- xenvif_start_queue(queue);
+static bool xenvif_rx_queue_stalled(struct xenvif_queue *queue)
+{
+ RING_IDX prod, cons;
+
+ prod = queue->rx.sring->req_prod;
+ cons = queue->rx.req_cons;
+
+ return !queue->stalled
+ && prod - cons < XEN_NETBK_RX_SLOTS_MAX
+ && time_after(jiffies,
+ queue->last_rx_time + rx_stall_timeout_jiffies);
+}
+
+static bool xenvif_rx_queue_ready(struct xenvif_queue *queue)
+{
+ RING_IDX prod, cons;
+
+ prod = queue->rx.sring->req_prod;
+ cons = queue->rx.req_cons;
+
+ return queue->stalled
+ && prod - cons >= XEN_NETBK_RX_SLOTS_MAX;
+}
+
+static bool xenvif_have_rx_work(struct xenvif_queue *queue)
+{
+ return (!skb_queue_empty(&queue->rx_queue)
+ && xenvif_rx_ring_slots_available(queue, XEN_NETBK_RX_SLOTS_MAX))
+ || xenvif_rx_queue_stalled(queue)
+ || xenvif_rx_queue_ready(queue)
+ || kthread_should_stop()
+ || queue->vif->disabled;
+}
+
+static long xenvif_rx_queue_timeout(struct xenvif_queue *queue)
+{
+ struct sk_buff *skb;
+ long timeout;
+
+ skb = skb_peek(&queue->rx_queue);
+ if (!skb)
+ return MAX_SCHEDULE_TIMEOUT;
+
+ timeout = XENVIF_RX_CB(skb)->expires - jiffies;
+ return timeout < 0 ? 0 : timeout;
+}
+
+/* Wait until the guest Rx thread has work.
+ *
+ * The timeout needs to be adjusted based on the current head of the
+ * queue (and not just the head at the beginning). In particular, if
+ * the queue is initially empty an infinite timeout is used and this
+ * needs to be reduced when a skb is queued.
+ *
+ * This cannot be done with wait_event_timeout() because it only
+ * calculates the timeout once.
+ */
+static void xenvif_wait_for_rx_work(struct xenvif_queue *queue)
+{
+ DEFINE_WAIT(wait);
+
+ if (xenvif_have_rx_work(queue))
+ return;
+
+ for (;;) {
+ long ret;
+
+ prepare_to_wait(&queue->wq, &wait, TASK_INTERRUPTIBLE);
+ if (xenvif_have_rx_work(queue))
+ break;
+ ret = schedule_timeout(xenvif_rx_queue_timeout(queue));
+ if (!ret)
+ break;
}
+ finish_wait(&queue->wq, &wait);
}
int xenvif_kthread_guest_rx(void *data)
{
struct xenvif_queue *queue = data;
- struct sk_buff *skb;
+ struct xenvif *vif = queue->vif;
- while (!kthread_should_stop()) {
- wait_event_interruptible(queue->wq,
- rx_work_todo(queue) ||
- queue->vif->disabled ||
- test_bit(QUEUE_STATUS_RX_PURGE_EVENT, &queue->status) ||
- kthread_should_stop());
+ for (;;) {
+ xenvif_wait_for_rx_work(queue);
if (kthread_should_stop())
break;
* context so we defer it here, if this thread is
* associated with queue 0.
*/
- if (unlikely(queue->vif->disabled && queue->id == 0)) {
- xenvif_carrier_off(queue->vif);
- } else if (unlikely(queue->vif->disabled)) {
- /* kthread_stop() would be called upon this thread soon,
- * be a bit proactive
- */
- skb_queue_purge(&queue->rx_queue);
- queue->rx_last_skb_slots = 0;
- } else if (unlikely(test_and_clear_bit(QUEUE_STATUS_RX_PURGE_EVENT,
- &queue->status))) {
- xenvif_rx_purge_event(queue);
- } else if (!netif_carrier_ok(queue->vif->dev)) {
- /* Another queue stalled and turned the carrier off, so
- * purge the internal queue of queues which were not
- * blocked
- */
- skb_queue_purge(&queue->rx_queue);
- queue->rx_last_skb_slots = 0;
+ if (unlikely(vif->disabled && queue->id == 0)) {
+ xenvif_carrier_off(vif);
+ xenvif_rx_queue_purge(queue);
+ continue;
}
if (!skb_queue_empty(&queue->rx_queue))
xenvif_rx_action(queue);
+ /* If the guest hasn't provided any Rx slots for a
+ * while it's probably not responsive, drop the
+ * carrier so packets are dropped earlier.
+ */
+ if (xenvif_rx_queue_stalled(queue))
+ xenvif_queue_carrier_off(queue);
+ else if (xenvif_rx_queue_ready(queue))
+ xenvif_queue_carrier_on(queue);
+
+ /* Queued packets may have foreign pages from other
+ * domains. These cannot be queued indefinitely as
+ * this would starve guests of grant refs and transmit
+ * slots.
+ */
+ xenvif_rx_queue_drop_expired(queue);
+
+ xenvif_rx_queue_maybe_wake(queue);
+
cond_resched();
}
/* Bin any remaining skbs */
- while ((skb = skb_dequeue(&queue->rx_queue)) != NULL)
- dev_kfree_skb(skb);
+ xenvif_rx_queue_purge(queue);
return 0;
}
goto failed_init;
rx_drain_timeout_jiffies = msecs_to_jiffies(rx_drain_timeout_msecs);
+ rx_stall_timeout_jiffies = msecs_to_jiffies(rx_stall_timeout_msecs);
#ifdef CONFIG_DEBUG_FS
xen_netback_dbg_root = debugfs_create_dir("xen-netback", NULL);
static int connect_rings(struct backend_info *be, struct xenvif_queue *queue);
static void connect(struct backend_info *be);
static int read_xenbus_vif_flags(struct backend_info *be);
-static void backend_create_xenvif(struct backend_info *be);
+static int backend_create_xenvif(struct backend_info *be);
static void unregister_hotplug_status_watch(struct backend_info *be);
static void set_backend_state(struct backend_info *be,
enum xenbus_state state);
struct xenvif_queue *queue = m->private;
struct xen_netif_tx_back_ring *tx_ring = &queue->tx;
struct xen_netif_rx_back_ring *rx_ring = &queue->rx;
+ struct netdev_queue *dev_queue;
if (tx_ring->sring) {
struct xen_netif_tx_sring *sring = tx_ring->sring;
queue->credit_timeout.expires,
jiffies);
+ dev_queue = netdev_get_tx_queue(queue->vif->dev, queue->id);
+
+ seq_printf(m, "\nRx internal queue: len %u max %u pkts %u %s\n",
+ queue->rx_queue_len, queue->rx_queue_max,
+ skb_queue_len(&queue->rx_queue),
+ netif_tx_queue_stopped(dev_queue) ? "stopped" : "running");
+
return 0;
}
be->state = XenbusStateInitWait;
/* This kicks hotplug scripts, so do it immediately. */
- backend_create_xenvif(be);
+ err = backend_create_xenvif(be);
+ if (err)
+ goto fail;
return 0;
}
-static void backend_create_xenvif(struct backend_info *be)
+static int backend_create_xenvif(struct backend_info *be)
{
int err;
long handle;
struct xenbus_device *dev = be->dev;
if (be->vif != NULL)
- return;
+ return 0;
err = xenbus_scanf(XBT_NIL, dev->nodename, "handle", "%li", &handle);
if (err != 1) {
xenbus_dev_fatal(dev, err, "reading handle");
- return;
+ return (err < 0) ? err : -EINVAL;
}
be->vif = xenvif_alloc(&dev->dev, dev->otherend_id, handle);
err = PTR_ERR(be->vif);
be->vif = NULL;
xenbus_dev_fatal(dev, err, "creating interface");
- return;
+ return err;
}
kobject_uevent(&dev->dev.kobj, KOBJ_ONLINE);
+ return 0;
}
static void backend_disconnect(struct backend_info *be)
be->vif->queues = vzalloc(requested_num_queues *
sizeof(struct xenvif_queue));
be->vif->num_queues = requested_num_queues;
+ be->vif->stalled_queues = requested_num_queues;
for (queue_index = 0; queue_index < requested_num_queues; ++queue_index) {
queue = &be->vif->queues[queue_index];
if (!rx_copy)
return -EOPNOTSUPP;
- if (vif->dev->tx_queue_len != 0) {
- if (xenbus_scanf(XBT_NIL, dev->otherend,
- "feature-rx-notify", "%d", &val) < 0)
- val = 0;
- if (val)
- vif->can_queue = 1;
- else
- /* Must be non-zero for pfifo_fast to work. */
- vif->dev->tx_queue_len = 1;
+ if (xenbus_scanf(XBT_NIL, dev->otherend,
+ "feature-rx-notify", "%d", &val) < 0 || val == 0) {
+ xenbus_dev_fatal(dev, -EINVAL, "feature-rx-notify is mandatory");
+ return -EINVAL;
}
if (xenbus_scanf(XBT_NIL, dev->otherend, "feature-sg",
len = skb_frag_size(frag);
offset = frag->page_offset;
- /* Data must not cross a page boundary. */
- BUG_ON(len + offset > PAGE_SIZE<<compound_order(page));
-
/* Skip unused frames from start of page */
page += offset >> PAGE_SHIFT;
offset &= ~PAGE_MASK;
while (len > 0) {
unsigned long bytes;
- BUG_ON(offset >= PAGE_SIZE);
-
bytes = PAGE_SIZE - offset;
if (bytes > len)
bytes = len;
rp = nubus_rom_addr(slot);
for(i = 4; i; i--)
{
- unsigned long flags;
int card_present;
rp--;
- local_irq_save(flags);
card_present = hwreg_present(rp);
- local_irq_restore(flags);
-
if (!card_present)
continue;
return NULL;
}
+static int of_empty_ranges_quirk(void)
+{
+ if (IS_ENABLED(CONFIG_PPC)) {
+ /* To save cycles, we cache the result */
+ static int quirk_state = -1;
+
+ if (quirk_state < 0)
+ quirk_state =
+ of_machine_is_compatible("Power Macintosh") ||
+ of_machine_is_compatible("MacRISC");
+ return quirk_state;
+ }
+ return false;
+}
+
static int of_translate_one(struct device_node *parent, struct of_bus *bus,
struct of_bus *pbus, __be32 *addr,
int na, int ns, int pna, const char *rprop)
* This code is only enabled on powerpc. --gcl
*/
ranges = of_get_property(parent, rprop, &rlen);
-#if !defined(CONFIG_PPC)
- if (ranges == NULL) {
+ if (ranges == NULL && !of_empty_ranges_quirk()) {
pr_err("OF: no ranges; cannot translate\n");
return 1;
}
-#endif /* !defined(CONFIG_PPC) */
if (ranges == NULL || rlen == 0) {
offset = of_read_number(addr, na);
memset(addr, 0, pna * 4);
}
EXPORT_SYMBOL_GPL(of_property_read_string);
-/**
- * of_property_read_string_index - Find and read a string from a multiple
- * strings property.
- * @np: device node from which the property value is to be read.
- * @propname: name of the property to be searched.
- * @index: index of the string in the list of strings
- * @out_string: pointer to null terminated return string, modified only if
- * return value is 0.
- *
- * Search for a property in a device tree node and retrieve a null
- * terminated string value (pointer to data, not a copy) in the list of strings
- * contained in that property.
- * Returns 0 on success, -EINVAL if the property does not exist, -ENODATA if
- * property does not have a value, and -EILSEQ if the string is not
- * null-terminated within the length of the property data.
- *
- * The out_string pointer is modified only if a valid string can be decoded.
- */
-int of_property_read_string_index(struct device_node *np, const char *propname,
- int index, const char **output)
-{
- struct property *prop = of_find_property(np, propname, NULL);
- int i = 0;
- size_t l = 0, total = 0;
- const char *p;
-
- if (!prop)
- return -EINVAL;
- if (!prop->value)
- return -ENODATA;
- if (strnlen(prop->value, prop->length) >= prop->length)
- return -EILSEQ;
-
- p = prop->value;
-
- for (i = 0; total < prop->length; total += l, p += l) {
- l = strlen(p) + 1;
- if (i++ == index) {
- *output = p;
- return 0;
- }
- }
- return -ENODATA;
-}
-EXPORT_SYMBOL_GPL(of_property_read_string_index);
-
/**
* of_property_match_string() - Find string in a list and return index
* @np: pointer to node containing string list property
end = p + prop->length;
for (i = 0; p < end; i++, p += l) {
- l = strlen(p) + 1;
+ l = strnlen(p, end - p) + 1;
if (p + l > end)
return -EILSEQ;
pr_debug("comparing %s with %s\n", string, p);
EXPORT_SYMBOL_GPL(of_property_match_string);
/**
- * of_property_count_strings - Find and return the number of strings from a
- * multiple strings property.
+ * of_property_read_string_util() - Utility helper for parsing string properties
* @np: device node from which the property value is to be read.
* @propname: name of the property to be searched.
+ * @out_strs: output array of string pointers.
+ * @sz: number of array elements to read.
+ * @skip: Number of strings to skip over at beginning of list.
*
- * Search for a property in a device tree node and retrieve the number of null
- * terminated string contain in it. Returns the number of strings on
- * success, -EINVAL if the property does not exist, -ENODATA if property
- * does not have a value, and -EILSEQ if the string is not null-terminated
- * within the length of the property data.
+ * Don't call this function directly. It is a utility helper for the
+ * of_property_read_string*() family of functions.
*/
-int of_property_count_strings(struct device_node *np, const char *propname)
+int of_property_read_string_helper(struct device_node *np, const char *propname,
+ const char **out_strs, size_t sz, int skip)
{
struct property *prop = of_find_property(np, propname, NULL);
- int i = 0;
- size_t l = 0, total = 0;
- const char *p;
+ int l = 0, i = 0;
+ const char *p, *end;
if (!prop)
return -EINVAL;
if (!prop->value)
return -ENODATA;
- if (strnlen(prop->value, prop->length) >= prop->length)
- return -EILSEQ;
-
p = prop->value;
+ end = p + prop->length;
- for (i = 0; total < prop->length; total += l, p += l, i++)
- l = strlen(p) + 1;
-
- return i;
+ for (i = 0; p < end && (!out_strs || i < skip + sz); i++, p += l) {
+ l = strnlen(p, end - p) + 1;
+ if (p + l > end)
+ return -EILSEQ;
+ if (out_strs && i >= skip)
+ *out_strs++ = p;
+ }
+ i -= skip;
+ return i <= 0 ? -ENODATA : i;
}
-EXPORT_SYMBOL_GPL(of_property_count_strings);
+EXPORT_SYMBOL_GPL(of_property_read_string_helper);
void of_print_phandle_args(const char *msg, const struct of_phandle_args *args)
{
* @allocflags: Allocation flags (typically pass GFP_KERNEL)
*
* Copy a property by dynamically allocating the memory of both the
- * property stucture and the property name & contents. The property's
+ * property structure and the property name & contents. The property's
* flags have the OF_DYNAMIC bit set so that we can differentiate between
* dynamically allocated properties and not.
* Returns the newly allocated property or NULL on out of memory error.
if (offset < 0)
return -ENODEV;
- while (match->compatible) {
+ while (match->compatible[0]) {
unsigned long addr;
if (fdt_node_check_compatible(fdt, offset, match->compatible)) {
match++;
int __init __weak early_init_dt_reserve_memory_arch(phys_addr_t base,
phys_addr_t size, bool nomap)
{
- if (memblock_is_region_reserved(base, size))
- return -EBUSY;
if (nomap)
return memblock_remove(base, size);
return memblock_reserve(base, size);
* This function assign memory region pointed by "memory-region" device tree
* property to the given device.
*/
-void of_reserved_mem_device_init(struct device *dev)
+int of_reserved_mem_device_init(struct device *dev)
{
struct reserved_mem *rmem;
struct device_node *np;
+ int ret;
np = of_parse_phandle(dev->of_node, "memory-region", 0);
if (!np)
- return;
+ return -ENODEV;
rmem = __find_rmem(np);
of_node_put(np);
if (!rmem || !rmem->ops || !rmem->ops->device_init)
- return;
+ return -EINVAL;
+
+ ret = rmem->ops->device_init(rmem, dev);
+ if (ret == 0)
+ dev_info(dev, "assigned reserved memory node %s\n", rmem->name);
- rmem->ops->device_init(rmem, dev);
- dev_info(dev, "assigned reserved memory node %s\n", rmem->name);
+ return ret;
}
/**
selftest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc);
}
-static void __init of_selftest_property_match_string(void)
+static void __init of_selftest_property_string(void)
{
+ const char *strings[4];
struct device_node *np;
int rc;
rc = of_property_match_string(np, "phandle-list-names", "third");
selftest(rc == 2, "third expected:0 got:%i\n", rc);
rc = of_property_match_string(np, "phandle-list-names", "fourth");
- selftest(rc == -ENODATA, "unmatched string; rc=%i", rc);
+ selftest(rc == -ENODATA, "unmatched string; rc=%i\n", rc);
rc = of_property_match_string(np, "missing-property", "blah");
- selftest(rc == -EINVAL, "missing property; rc=%i", rc);
+ selftest(rc == -EINVAL, "missing property; rc=%i\n", rc);
rc = of_property_match_string(np, "empty-property", "blah");
- selftest(rc == -ENODATA, "empty property; rc=%i", rc);
+ selftest(rc == -ENODATA, "empty property; rc=%i\n", rc);
rc = of_property_match_string(np, "unterminated-string", "blah");
- selftest(rc == -EILSEQ, "unterminated string; rc=%i", rc);
+ selftest(rc == -EILSEQ, "unterminated string; rc=%i\n", rc);
+
+ /* of_property_count_strings() tests */
+ rc = of_property_count_strings(np, "string-property");
+ selftest(rc == 1, "Incorrect string count; rc=%i\n", rc);
+ rc = of_property_count_strings(np, "phandle-list-names");
+ selftest(rc == 3, "Incorrect string count; rc=%i\n", rc);
+ rc = of_property_count_strings(np, "unterminated-string");
+ selftest(rc == -EILSEQ, "unterminated string; rc=%i\n", rc);
+ rc = of_property_count_strings(np, "unterminated-string-list");
+ selftest(rc == -EILSEQ, "unterminated string array; rc=%i\n", rc);
+
+ /* of_property_read_string_index() tests */
+ rc = of_property_read_string_index(np, "string-property", 0, strings);
+ selftest(rc == 0 && !strcmp(strings[0], "foobar"), "of_property_read_string_index() failure; rc=%i\n", rc);
+ strings[0] = NULL;
+ rc = of_property_read_string_index(np, "string-property", 1, strings);
+ selftest(rc == -ENODATA && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc);
+ rc = of_property_read_string_index(np, "phandle-list-names", 0, strings);
+ selftest(rc == 0 && !strcmp(strings[0], "first"), "of_property_read_string_index() failure; rc=%i\n", rc);
+ rc = of_property_read_string_index(np, "phandle-list-names", 1, strings);
+ selftest(rc == 0 && !strcmp(strings[0], "second"), "of_property_read_string_index() failure; rc=%i\n", rc);
+ rc = of_property_read_string_index(np, "phandle-list-names", 2, strings);
+ selftest(rc == 0 && !strcmp(strings[0], "third"), "of_property_read_string_index() failure; rc=%i\n", rc);
+ strings[0] = NULL;
+ rc = of_property_read_string_index(np, "phandle-list-names", 3, strings);
+ selftest(rc == -ENODATA && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc);
+ strings[0] = NULL;
+ rc = of_property_read_string_index(np, "unterminated-string", 0, strings);
+ selftest(rc == -EILSEQ && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc);
+ rc = of_property_read_string_index(np, "unterminated-string-list", 0, strings);
+ selftest(rc == 0 && !strcmp(strings[0], "first"), "of_property_read_string_index() failure; rc=%i\n", rc);
+ strings[0] = NULL;
+ rc = of_property_read_string_index(np, "unterminated-string-list", 2, strings); /* should fail */
+ selftest(rc == -EILSEQ && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc);
+ strings[1] = NULL;
+
+ /* of_property_read_string_array() tests */
+ rc = of_property_read_string_array(np, "string-property", strings, 4);
+ selftest(rc == 1, "Incorrect string count; rc=%i\n", rc);
+ rc = of_property_read_string_array(np, "phandle-list-names", strings, 4);
+ selftest(rc == 3, "Incorrect string count; rc=%i\n", rc);
+ rc = of_property_read_string_array(np, "unterminated-string", strings, 4);
+ selftest(rc == -EILSEQ, "unterminated string; rc=%i\n", rc);
+ /* -- An incorrectly formed string should cause a failure */
+ rc = of_property_read_string_array(np, "unterminated-string-list", strings, 4);
+ selftest(rc == -EILSEQ, "unterminated string array; rc=%i\n", rc);
+ /* -- parsing the correctly formed strings should still work: */
+ strings[2] = NULL;
+ rc = of_property_read_string_array(np, "unterminated-string-list", strings, 2);
+ selftest(rc == 2 && strings[2] == NULL, "of_property_read_string_array() failure; rc=%i\n", rc);
+ strings[1] = NULL;
+ rc = of_property_read_string_array(np, "phandle-list-names", strings, 1);
+ selftest(rc == 1 && strings[1] == NULL, "Overwrote end of string array; rc=%i, str='%s'\n", rc, strings[1]);
}
#define propcmp(p1, p2) (((p1)->length == (p2)->length) && \
return;
}
- while (last_node_index >= 0) {
+ while (last_node_index-- > 0) {
if (nodes[last_node_index]) {
np = of_find_node_by_path(nodes[last_node_index]->full_name);
- if (strcmp(np->full_name, "/aliases") != 0) {
+ if (np == nodes[last_node_index]) {
+ if (of_aliases == np) {
+ of_node_put(of_aliases);
+ of_aliases = NULL;
+ }
detach_node_and_children(np);
} else {
for_each_property_of_node(np, prop) {
}
}
}
- last_node_index--;
}
}
res = selftest_data_add();
if (res)
return res;
+ if (!of_aliases)
+ of_aliases = of_find_node_by_path("/aliases");
np = of_find_node_by_path("/testcase-data/phandle-tests/consumer-a");
if (!np) {
of_selftest_find_node_by_name();
of_selftest_dynamic();
of_selftest_parse_phandle_with_args();
- of_selftest_property_match_string();
+ of_selftest_property_string();
of_selftest_property_copy();
of_selftest_changeset();
of_selftest_parse_interrupts();
phandle-list-bad-args = <&provider2 1 0>,
<&provider3 0>;
empty-property;
+ string-property = "foobar";
unterminated-string = [40 41 42 43];
+ unterminated-string-list = "first", "second", [40 41 42 43];
};
};
};
return pcie_caps_reg(dev) & PCI_EXP_FLAGS_VERS;
}
-static inline bool pcie_cap_has_lnkctl(const struct pci_dev *dev)
+bool pcie_cap_has_lnkctl(const struct pci_dev *dev)
{
int type = pci_pcie_type(dev);
goto err_pcie;
}
- /* allow the clocks to stabilize */
- usleep_range(200, 500);
-
/* power up core phy and enable ref clock */
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
IMX6Q_GPR1_PCIE_TEST_PD, 0 << 18);
+ /*
+ * the async reset input need ref clock to sync internally,
+ * when the ref clock comes after reset, internal synced
+ * reset time is too short, cannot meet the requirement.
+ * add one ~10us delay here.
+ */
+ udelay(10);
regmap_update_bits(imx6_pcie->iomuxc_gpr, IOMUXC_GPR1,
IMX6Q_GPR1_PCIE_REF_CLK_EN, 1 << 16);
+ /* allow the clocks to stabilize */
+ usleep_range(200, 500);
+
/* Some boards don't have PCIe reset GPIO. */
if (gpio_is_valid(imx6_pcie->reset_gpio)) {
gpio_set_value(imx6_pcie->reset_gpio, 0);
struct resource all;
struct resource io;
+ struct resource pio;
struct resource mem;
struct resource prefetch;
struct resource busn;
{
struct tegra_pcie *pcie = sys_to_pcie(sys);
int err;
- phys_addr_t io_start;
err = devm_request_resource(pcie->dev, &pcie->all, &pcie->mem);
if (err < 0)
if (err)
return err;
- io_start = pci_pio_to_address(pcie->io.start);
-
pci_add_resource_offset(&sys->resources, &pcie->mem, sys->mem_offset);
pci_add_resource_offset(&sys->resources, &pcie->prefetch,
sys->mem_offset);
pci_add_resource(&sys->resources, &pcie->busn);
- pci_ioremap_io(nr * SZ_64K, io_start);
+ pci_ioremap_io(pcie->pio.start, pcie->io.start);
return 1;
}
static void tegra_pcie_setup_translations(struct tegra_pcie *pcie)
{
u32 fpci_bar, size, axi_address;
- phys_addr_t io_start = pci_pio_to_address(pcie->io.start);
/* Bar 0: type 1 extended configuration space */
fpci_bar = 0xfe100000;
/* Bar 1: downstream IO bar */
fpci_bar = 0xfdfc0000;
size = resource_size(&pcie->io);
- axi_address = io_start;
+ axi_address = pcie->io.start;
afi_writel(pcie, axi_address, AFI_AXI_BAR1_START);
afi_writel(pcie, size >> 12, AFI_AXI_BAR1_SZ);
afi_writel(pcie, fpci_bar, AFI_FPCI_BAR1);
switch (res.flags & IORESOURCE_TYPE_BITS) {
case IORESOURCE_IO:
- memcpy(&pcie->io, &res, sizeof(res));
- pcie->io.name = np->full_name;
+ memcpy(&pcie->pio, &res, sizeof(res));
+ pcie->pio.name = np->full_name;
+
+ /*
+ * The Tegra PCIe host bridge uses this to program the
+ * mapping of the I/O space to the physical address,
+ * so we override the .start and .end fields here that
+ * of_pci_range_to_resource() converted to I/O space.
+ * We also set the IORESOURCE_MEM type to clarify that
+ * the resource is in the physical memory space.
+ */
+ pcie->io.start = range.cpu_addr;
+ pcie->io.end = range.cpu_addr + range.size - 1;
+ pcie->io.flags = IORESOURCE_MEM;
+ pcie->io.name = "I/O";
+
+ memcpy(&res, &pcie->io, sizeof(res));
break;
case IORESOURCE_MEM:
if (ret)
return ret;
- bus = pci_scan_root_bus(&pdev->dev, 0, &xgene_pcie_ops, port, &res);
+ bus = pci_create_root_bus(&pdev->dev, 0,
+ &xgene_pcie_ops, port, &res);
if (!bus)
return -ENOMEM;
+ pci_scan_child_bus(bus);
+ pci_assign_unassigned_bus_resources(bus);
+ pci_bus_add_devices(bus);
+
platform_set_drvdata(pdev, port);
return 0;
}
goto err_out_none;
}
- if (!dev->port->subordinate) {
- /* Can happen if we run out of bus numbers during probe */
- dev_err(&dev->device,
- "Hotplug bridge without secondary bus, ignoring\n");
- goto err_out_none;
- }
-
ctrl = pcie_init(dev);
if (!ctrl) {
dev_err(&dev->device, "Controller initialization failed\n");
return entry;
}
+static int msi_verify_entries(struct pci_dev *dev)
+{
+ struct msi_desc *entry;
+
+ list_for_each_entry(entry, &dev->msi_list, list) {
+ if (!dev->no_64bit_msi || !entry->msg.address_hi)
+ continue;
+ dev_err(&dev->dev, "Device has broken 64-bit MSI but arch"
+ " tried to assign one above 4G\n");
+ return -EIO;
+ }
+ return 0;
+}
+
/**
* msi_capability_init - configure device's MSI capability structure
* @dev: pointer to the pci_dev data structure of MSI device function
return ret;
}
+ ret = msi_verify_entries(dev);
+ if (ret) {
+ msi_mask_irq(entry, mask, ~mask);
+ free_msi_irqs(dev);
+ return ret;
+ }
+
ret = populate_msi_sysfs(dev);
if (ret) {
msi_mask_irq(entry, mask, ~mask);
if (ret)
goto out_avail;
+ /* Check if all MSI entries honor device restrictions */
+ ret = msi_verify_entries(dev);
+ if (ret)
+ goto out_free;
+
/*
* Some devices require MSI-X to be enabled before we can touch the
* MSI-X registers. We need to mask all the vectors to prevent
}
static DEVICE_ATTR_RO(modalias);
-static ssize_t enabled_store(struct device *dev, struct device_attribute *attr,
+static ssize_t enable_store(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
struct pci_dev *pdev = to_pci_dev(dev);
return result < 0 ? result : count;
}
-static ssize_t enabled_show(struct device *dev, struct device_attribute *attr,
+static ssize_t enable_show(struct device *dev, struct device_attribute *attr,
char *buf)
{
struct pci_dev *pdev;
pdev = to_pci_dev(dev);
return sprintf(buf, "%u\n", atomic_read(&pdev->enable_cnt));
}
-static DEVICE_ATTR_RW(enabled);
+static DEVICE_ATTR_RW(enable);
#ifdef CONFIG_NUMA
static ssize_t numa_node_show(struct device *dev, struct device_attribute *attr,
#endif
&dev_attr_dma_mask_bits.attr,
&dev_attr_consistent_dma_mask_bits.attr,
- &dev_attr_enabled.attr,
+ &dev_attr_enable.attr,
&dev_attr_broken_parity_status.attr,
&dev_attr_msi_bus.attr,
#if defined(CONFIG_PM_RUNTIME) && defined(CONFIG_ACPI)
extern const unsigned char pcie_link_speed[];
+bool pcie_cap_has_lnkctl(const struct pci_dev *dev);
+
/* Functions internal to the PCI core code */
int pci_create_sysfs_dev_files(struct pci_dev *pdev);
struct pcie_pme_service_data *data = get_service_data(srv);
struct pci_dev *port = srv->port;
bool wakeup;
+ int ret;
if (device_may_wakeup(&port->dev)) {
wakeup = true;
}
spin_lock_irq(&data->lock);
if (wakeup) {
- enable_irq_wake(srv->irq);
+ ret = enable_irq_wake(srv->irq);
data->suspend_level = PME_SUSPEND_WAKEUP;
- } else {
+ }
+ if (!wakeup || ret) {
struct pci_dev *port = srv->port;
pcie_pme_interrupt_enable(port, false);
{
struct pci_dev *dev = child->self;
u16 mem_base_lo, mem_limit_lo;
- unsigned long base, limit;
+ u64 base64, limit64;
+ dma_addr_t base, limit;
struct pci_bus_region region;
struct resource *res;
res = child->resource[2];
pci_read_config_word(dev, PCI_PREF_MEMORY_BASE, &mem_base_lo);
pci_read_config_word(dev, PCI_PREF_MEMORY_LIMIT, &mem_limit_lo);
- base = ((unsigned long) mem_base_lo & PCI_PREF_RANGE_MASK) << 16;
- limit = ((unsigned long) mem_limit_lo & PCI_PREF_RANGE_MASK) << 16;
+ base64 = (mem_base_lo & PCI_PREF_RANGE_MASK) << 16;
+ limit64 = (mem_limit_lo & PCI_PREF_RANGE_MASK) << 16;
if ((mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) == PCI_PREF_RANGE_TYPE_64) {
u32 mem_base_hi, mem_limit_hi;
* this, just assume they are not being used.
*/
if (mem_base_hi <= mem_limit_hi) {
-#if BITS_PER_LONG == 64
- base |= ((unsigned long) mem_base_hi) << 32;
- limit |= ((unsigned long) mem_limit_hi) << 32;
-#else
- if (mem_base_hi || mem_limit_hi) {
- dev_err(&dev->dev, "can't handle 64-bit address space for bridge\n");
- return;
- }
-#endif
+ base64 |= (u64) mem_base_hi << 32;
+ limit64 |= (u64) mem_limit_hi << 32;
}
}
+
+ base = (dma_addr_t) base64;
+ limit = (dma_addr_t) limit64;
+
+ if (base != base64) {
+ dev_err(&dev->dev, "can't handle bridge window above 4GB (bus address %#010llx)\n",
+ (unsigned long long) base64);
+ return;
+ }
+
if (base <= limit) {
res->flags = (mem_base_lo & PCI_PREF_RANGE_TYPE_MASK) |
IORESOURCE_MEM | IORESOURCE_PREFETCH;
~hpp->pci_exp_devctl_and, hpp->pci_exp_devctl_or);
/* Initialize Link Control Register */
- if (dev->subordinate)
+ if (pcie_cap_has_lnkctl(dev))
pcie_capability_clear_and_set_word(dev, PCI_EXP_LNKCTL,
~hpp->pci_exp_lnkctl_and, hpp->pci_exp_lnkctl_or);
otg->phy = &phy->phy;
platform_set_drvdata(pdev, phy);
+ pm_runtime_enable(phy->dev);
generic_phy = devm_phy_create(phy->dev, NULL, &ops, NULL);
- if (IS_ERR(generic_phy))
+ if (IS_ERR(generic_phy)) {
+ pm_runtime_disable(phy->dev);
return PTR_ERR(generic_phy);
+ }
phy_set_drvdata(generic_phy, phy);
- pm_runtime_enable(phy->dev);
phy_provider = devm_of_phy_provider_register(phy->dev,
of_phy_simple_xlate);
if (IS_ERR(phy_provider)) {
spin_lock_irqsave(&vg->lock, flags);
value = readl(reg);
+ WARN(value & BYT_DIRECT_IRQ_EN,
+ "Bad pad config for io mode, force direct_irq_en bit clearing");
+
/* For level trigges the BYT_TRIG_POS and BYT_TRIG_NEG bits
* are used to indicate high and low level triggering
*/
- value &= ~(BYT_TRIG_POS | BYT_TRIG_NEG | BYT_TRIG_LVL);
+ value &= ~(BYT_DIRECT_IRQ_EN | BYT_TRIG_POS | BYT_TRIG_NEG |
+ BYT_TRIG_LVL);
switch (type) {
case IRQ_TYPE_LEVEL_HIGH:
"Potential Error: Setting GPIO with direct_irq_en to output");
reg_val = readl(reg) | BYT_DIR_MASK;
- reg_val &= ~BYT_OUTPUT_EN;
+ reg_val &= ~(BYT_OUTPUT_EN | BYT_INPUT_EN);
if (value)
writel(reg_val | BYT_LEVEL, reg);
config HP_ACCEL
tristate "HP laptop accelerometer"
depends on INPUT && ACPI
+ depends on SERIO_I8042
select SENSORS_LIS3LV02D
select NEW_LEDS
select LEDS_CLASS
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5741"),
},
},
+ {
+ /*
+ * Note no video_set_backlight_video_vendor, we must use the
+ * acer interface, as there is no native backlight interface.
+ */
+ .ident = "Acer KAV80",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "KAV80"),
+ },
+ },
{}
};
},
.driver_data = &quirk_asus_wapf4,
},
+ {
+ .callback = dmi_matched,
+ .ident = "ASUSTeK COMPUTER INC. X550VB",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "X550VB"),
+ },
+ .driver_data = &quirk_asus_wapf4,
+ },
{
.callback = dmi_matched,
.ident = "ASUSTeK COMPUTER INC. X55A",
#include <linux/leds.h>
#include <linux/atomic.h>
#include <linux/acpi.h>
+#include <linux/i8042.h>
+#include <linux/serio.h>
#include "../../misc/lis3lv02d/lis3lv02d.h"
#define DRIVER_NAME "hp_accel"
/* HP-specific accelerometer driver ------------------------------------ */
+/* e0 25, e0 26, e0 27, e0 28 are scan codes that the accelerometer with acpi id
+ * HPQ6000 sends through the keyboard bus */
+#define ACCEL_1 0x25
+#define ACCEL_2 0x26
+#define ACCEL_3 0x27
+#define ACCEL_4 0x28
+
/* For automatic insertion of the module */
static const struct acpi_device_id lis3lv02d_device_ids[] = {
{"HPQ0004", 0}, /* HP Mobile Data Protection System PNP */
printk(KERN_DEBUG DRIVER_NAME ": Error getting resources\n");
}
+static bool hp_accel_i8042_filter(unsigned char data, unsigned char str,
+ struct serio *port)
+{
+ static bool extended;
+
+ if (str & I8042_STR_AUXDATA)
+ return false;
+
+ if (data == 0xe0) {
+ extended = true;
+ return true;
+ } else if (unlikely(extended)) {
+ extended = false;
+
+ switch (data) {
+ case ACCEL_1:
+ case ACCEL_2:
+ case ACCEL_3:
+ case ACCEL_4:
+ return true;
+ default:
+ serio_interrupt(port, 0xe0, 0);
+ return false;
+ }
+ }
+
+ return false;
+}
+
static int lis3lv02d_add(struct acpi_device *device)
{
int ret;
if (ret)
return ret;
+ /* filter to remove HPQ6000 accelerometer data
+ * from keyboard bus stream */
+ if (strstr(dev_name(&device->dev), "HPQ6000"))
+ i8042_install_filter(hp_accel_i8042_filter);
+
INIT_WORK(&hpled_led.work, delayed_set_status_worker);
ret = led_classdev_register(NULL, &hpled_led.led_classdev);
if (ret) {
if (!device)
return -EINVAL;
+ i8042_remove_filter(hp_accel_i8042_filter);
lis3lv02d_joystick_disable(&lis3_dev);
lis3lv02d_poweroff(&lis3_dev);
DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Yoga 2"),
},
},
+ {
+ .ident = "Lenovo Yoga 3 Pro 1370",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"),
+ DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA 3 Pro-1370"),
+ },
+ },
{}
};
},
.driver_data = &samsung_broken_acpi_video,
},
+ {
+ .callback = samsung_dmi_matched,
+ .ident = "NC210",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "NC210/NC110"),
+ DMI_MATCH(DMI_BOARD_NAME, "NC210/NC110"),
+ },
+ .driver_data = &samsung_broken_acpi_video,
+ },
{
.callback = samsung_dmi_matched,
.ident = "730U3E/740U3E",
DMI_MATCH(DMI_PRODUCT_NAME, "Qosmio X75-A"),
},
},
+ {
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TECRA A50-A"),
+ },
+ },
{}
};
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/time.h>
+#include <linux/time64.h>
#include <linux/of.h>
#include <linux/completion.h>
#include <linux/mfd/core.h>
struct ab8500_fg_avg_cap {
int avg;
int samples[NBR_AVG_SAMPLES];
- __kernel_time_t time_stamps[NBR_AVG_SAMPLES];
+ time64_t time_stamps[NBR_AVG_SAMPLES];
int pos;
int nbr_samples;
int sum;
*/
static int ab8500_fg_add_cap_sample(struct ab8500_fg *di, int sample)
{
- struct timespec ts;
+ struct timespec64 ts64;
struct ab8500_fg_avg_cap *avg = &di->avg_cap;
- getnstimeofday(&ts);
+ getnstimeofday64(&ts64);
do {
avg->sum += sample - avg->samples[avg->pos];
avg->samples[avg->pos] = sample;
- avg->time_stamps[avg->pos] = ts.tv_sec;
+ avg->time_stamps[avg->pos] = ts64.tv_sec;
avg->pos++;
if (avg->pos == NBR_AVG_SAMPLES)
* Check the time stamp for each sample. If too old,
* replace with latest sample
*/
- } while (ts.tv_sec - VALID_CAPACITY_SEC > avg->time_stamps[avg->pos]);
+ } while (ts64.tv_sec - VALID_CAPACITY_SEC > avg->time_stamps[avg->pos]);
avg->avg = avg->sum / avg->nbr_samples;
static void ab8500_fg_fill_cap_sample(struct ab8500_fg *di, int sample)
{
int i;
- struct timespec ts;
+ struct timespec64 ts64;
struct ab8500_fg_avg_cap *avg = &di->avg_cap;
- getnstimeofday(&ts);
+ getnstimeofday64(&ts64);
for (i = 0; i < NBR_AVG_SAMPLES; i++) {
avg->samples[i] = sample;
- avg->time_stamps[i] = ts.tv_sec;
+ avg->time_stamps[i] = ts64.tv_sec;
}
avg->pos = 0;
if (np) {
bq->notify_psy = power_supply_get_by_phandle(np, "ti,usb-charger-detection");
- if (!bq->notify_psy)
- return -EPROBE_DEFER;
+ if (IS_ERR(bq->notify_psy)) {
+ dev_info(&client->dev,
+ "no 'ti,usb-charger-detection' property (err=%ld)\n",
+ PTR_ERR(bq->notify_psy));
+ bq->notify_psy = NULL;
+ } else if (!bq->notify_psy) {
+ ret = -EPROBE_DEFER;
+ goto error_2;
+ }
}
else if (pdata->notify_device)
bq->notify_psy = power_supply_get_by_name(pdata->notify_device);
ret = of_property_read_u32(np, "ti,current-limit",
&bq->init_data.current_limit);
if (ret)
- return ret;
+ goto error_2;
ret = of_property_read_u32(np, "ti,weak-battery-voltage",
&bq->init_data.weak_battery_voltage);
if (ret)
- return ret;
+ goto error_2;
ret = of_property_read_u32(np, "ti,battery-regulation-voltage",
&bq->init_data.battery_regulation_voltage);
if (ret)
- return ret;
+ goto error_2;
ret = of_property_read_u32(np, "ti,charge-current",
&bq->init_data.charge_current);
if (ret)
- return ret;
+ goto error_2;
ret = of_property_read_u32(np, "ti,termination-current",
&bq->init_data.termination_current);
if (ret)
- return ret;
+ goto error_2;
ret = of_property_read_u32(np, "ti,resistor-sense",
&bq->init_data.resistor_sense);
if (ret)
- return ret;
+ goto error_2;
} else {
memcpy(&bq->init_data, pdata, sizeof(bq->init_data));
}
static bool is_batt_present(struct charger_manager *cm)
{
union power_supply_propval val;
+ struct power_supply *psy;
bool present = false;
int i, ret;
case CM_NO_BATTERY:
break;
case CM_FUEL_GAUGE:
- ret = cm->fuel_gauge->get_property(cm->fuel_gauge,
+ psy = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
+ if (!psy)
+ break;
+
+ ret = psy->get_property(psy,
POWER_SUPPLY_PROP_PRESENT, &val);
if (ret == 0 && val.intval)
present = true;
break;
case CM_CHARGER_STAT:
- for (i = 0; cm->charger_stat[i]; i++) {
- ret = cm->charger_stat[i]->get_property(
- cm->charger_stat[i],
- POWER_SUPPLY_PROP_PRESENT, &val);
+ for (i = 0; cm->desc->psy_charger_stat[i]; i++) {
+ psy = power_supply_get_by_name(
+ cm->desc->psy_charger_stat[i]);
+ if (!psy) {
+ dev_err(cm->dev, "Cannot find power supply \"%s\"\n",
+ cm->desc->psy_charger_stat[i]);
+ continue;
+ }
+
+ ret = psy->get_property(psy, POWER_SUPPLY_PROP_PRESENT,
+ &val);
if (ret == 0 && val.intval) {
present = true;
break;
static bool is_ext_pwr_online(struct charger_manager *cm)
{
union power_supply_propval val;
+ struct power_supply *psy;
bool online = false;
int i, ret;
/* If at least one of them has one, it's yes. */
- for (i = 0; cm->charger_stat[i]; i++) {
- ret = cm->charger_stat[i]->get_property(
- cm->charger_stat[i],
- POWER_SUPPLY_PROP_ONLINE, &val);
+ for (i = 0; cm->desc->psy_charger_stat[i]; i++) {
+ psy = power_supply_get_by_name(cm->desc->psy_charger_stat[i]);
+ if (!psy) {
+ dev_err(cm->dev, "Cannot find power supply \"%s\"\n",
+ cm->desc->psy_charger_stat[i]);
+ continue;
+ }
+
+ ret = psy->get_property(psy, POWER_SUPPLY_PROP_ONLINE, &val);
if (ret == 0 && val.intval) {
online = true;
break;
static int get_batt_uV(struct charger_manager *cm, int *uV)
{
union power_supply_propval val;
+ struct power_supply *fuel_gauge;
int ret;
- if (!cm->fuel_gauge)
+ fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
+ if (!fuel_gauge)
return -ENODEV;
- ret = cm->fuel_gauge->get_property(cm->fuel_gauge,
+ ret = fuel_gauge->get_property(fuel_gauge,
POWER_SUPPLY_PROP_VOLTAGE_NOW, &val);
if (ret)
return ret;
{
int i, ret;
bool charging = false;
+ struct power_supply *psy;
union power_supply_propval val;
/* If there is no battery, it cannot be charged */
return false;
/* If at least one of the charger is charging, return yes */
- for (i = 0; cm->charger_stat[i]; i++) {
+ for (i = 0; cm->desc->psy_charger_stat[i]; i++) {
/* 1. The charger sholuld not be DISABLED */
if (cm->emergency_stop)
continue;
if (!cm->charger_enabled)
continue;
+ psy = power_supply_get_by_name(cm->desc->psy_charger_stat[i]);
+ if (!psy) {
+ dev_err(cm->dev, "Cannot find power supply \"%s\"\n",
+ cm->desc->psy_charger_stat[i]);
+ continue;
+ }
+
/* 2. The charger should be online (ext-power) */
- ret = cm->charger_stat[i]->get_property(
- cm->charger_stat[i],
- POWER_SUPPLY_PROP_ONLINE, &val);
+ ret = psy->get_property(psy, POWER_SUPPLY_PROP_ONLINE, &val);
if (ret) {
dev_warn(cm->dev, "Cannot read ONLINE value from %s\n",
cm->desc->psy_charger_stat[i]);
* 3. The charger should not be FULL, DISCHARGING,
* or NOT_CHARGING.
*/
- ret = cm->charger_stat[i]->get_property(
- cm->charger_stat[i],
- POWER_SUPPLY_PROP_STATUS, &val);
+ ret = psy->get_property(psy, POWER_SUPPLY_PROP_STATUS, &val);
if (ret) {
dev_warn(cm->dev, "Cannot read STATUS value from %s\n",
cm->desc->psy_charger_stat[i]);
{
struct charger_desc *desc = cm->desc;
union power_supply_propval val;
+ struct power_supply *fuel_gauge;
int ret = 0;
int uV;
if (!is_batt_present(cm))
return false;
- if (cm->fuel_gauge && desc->fullbatt_full_capacity > 0) {
+ fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
+ if (!fuel_gauge)
+ return false;
+
+ if (desc->fullbatt_full_capacity > 0) {
val.intval = 0;
/* Not full if capacity of fuel gauge isn't full */
- ret = cm->fuel_gauge->get_property(cm->fuel_gauge,
+ ret = fuel_gauge->get_property(fuel_gauge,
POWER_SUPPLY_PROP_CHARGE_FULL, &val);
if (!ret && val.intval > desc->fullbatt_full_capacity)
return true;
}
/* Full, if the capacity is more than fullbatt_soc */
- if (cm->fuel_gauge && desc->fullbatt_soc > 0) {
+ if (desc->fullbatt_soc > 0) {
val.intval = 0;
- ret = cm->fuel_gauge->get_property(cm->fuel_gauge,
+ ret = fuel_gauge->get_property(fuel_gauge,
POWER_SUPPLY_PROP_CAPACITY, &val);
if (!ret && val.intval >= desc->fullbatt_soc)
return true;
return ret;
}
+static int cm_get_battery_temperature_by_psy(struct charger_manager *cm,
+ int *temp)
+{
+ struct power_supply *fuel_gauge;
+
+ fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
+ if (!fuel_gauge)
+ return -ENODEV;
+
+ return fuel_gauge->get_property(fuel_gauge,
+ POWER_SUPPLY_PROP_TEMP,
+ (union power_supply_propval *)temp);
+}
+
static int cm_get_battery_temperature(struct charger_manager *cm,
int *temp)
{
return -ENODEV;
#ifdef CONFIG_THERMAL
- ret = thermal_zone_get_temp(cm->tzd_batt, (unsigned long *)temp);
- if (!ret)
- /* Calibrate temperature unit */
- *temp /= 100;
-#else
- ret = cm->fuel_gauge->get_property(cm->fuel_gauge,
- POWER_SUPPLY_PROP_TEMP,
- (union power_supply_propval *)temp);
+ if (cm->tzd_batt) {
+ ret = thermal_zone_get_temp(cm->tzd_batt, (unsigned long *)temp);
+ if (!ret)
+ /* Calibrate temperature unit */
+ *temp /= 100;
+ } else
#endif
+ {
+ /* if-else continued from CONFIG_THERMAL */
+ ret = cm_get_battery_temperature_by_psy(cm, temp);
+ }
+
return ret;
}
struct charger_manager *cm = container_of(psy,
struct charger_manager, charger_psy);
struct charger_desc *desc = cm->desc;
+ struct power_supply *fuel_gauge;
int ret = 0;
int uV;
ret = get_batt_uV(cm, &val->intval);
break;
case POWER_SUPPLY_PROP_CURRENT_NOW:
- ret = cm->fuel_gauge->get_property(cm->fuel_gauge,
+ fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
+ if (!fuel_gauge) {
+ ret = -ENODEV;
+ break;
+ }
+ ret = fuel_gauge->get_property(fuel_gauge,
POWER_SUPPLY_PROP_CURRENT_NOW, val);
break;
case POWER_SUPPLY_PROP_TEMP:
case POWER_SUPPLY_PROP_TEMP_AMBIENT:
return cm_get_battery_temperature(cm, &val->intval);
case POWER_SUPPLY_PROP_CAPACITY:
- if (!cm->fuel_gauge) {
+ fuel_gauge = power_supply_get_by_name(cm->desc->psy_fuel_gauge);
+ if (!fuel_gauge) {
ret = -ENODEV;
break;
}
break;
}
- ret = cm->fuel_gauge->get_property(cm->fuel_gauge,
+ ret = fuel_gauge->get_property(fuel_gauge,
POWER_SUPPLY_PROP_CAPACITY, val);
if (ret)
break;
break;
case POWER_SUPPLY_PROP_CHARGE_NOW:
if (is_charging(cm)) {
- ret = cm->fuel_gauge->get_property(cm->fuel_gauge,
+ fuel_gauge = power_supply_get_by_name(
+ cm->desc->psy_fuel_gauge);
+ if (!fuel_gauge) {
+ ret = -ENODEV;
+ break;
+ }
+
+ ret = fuel_gauge->get_property(fuel_gauge,
POWER_SUPPLY_PROP_CHARGE_NOW,
val);
if (ret) {
.properties = default_charger_props,
.num_properties = ARRAY_SIZE(default_charger_props),
.get_property = charger_get_property,
+ .no_thermal = true,
};
/**
return ret;
}
-static int cm_init_thermal_data(struct charger_manager *cm)
+static int cm_init_thermal_data(struct charger_manager *cm,
+ struct power_supply *fuel_gauge)
{
struct charger_desc *desc = cm->desc;
union power_supply_propval val;
int ret;
/* Verify whether fuel gauge provides battery temperature */
- ret = cm->fuel_gauge->get_property(cm->fuel_gauge,
+ ret = fuel_gauge->get_property(fuel_gauge,
POWER_SUPPLY_PROP_TEMP, &val);
if (!ret) {
cm->desc->measure_battery_temp = true;
}
#ifdef CONFIG_THERMAL
- cm->tzd_batt = cm->fuel_gauge->tzd;
-
if (ret && desc->thermal_zone) {
cm->tzd_batt =
thermal_zone_get_zone_by_name(desc->thermal_zone);
int ret = 0, i = 0;
int j = 0;
union power_supply_propval val;
+ struct power_supply *fuel_gauge;
if (g_desc && !rtc_dev && g_desc->rtc_name) {
rtc_dev = rtc_class_open(g_desc->rtc_name);
while (desc->psy_charger_stat[i])
i++;
- cm->charger_stat = devm_kzalloc(&pdev->dev,
- sizeof(struct power_supply *) * i, GFP_KERNEL);
- if (!cm->charger_stat)
- return -ENOMEM;
-
+ /* Check if charger's supplies are present at probe */
for (i = 0; desc->psy_charger_stat[i]; i++) {
- cm->charger_stat[i] = power_supply_get_by_name(
- desc->psy_charger_stat[i]);
- if (!cm->charger_stat[i]) {
+ struct power_supply *psy;
+
+ psy = power_supply_get_by_name(desc->psy_charger_stat[i]);
+ if (!psy) {
dev_err(&pdev->dev, "Cannot find power supply \"%s\"\n",
desc->psy_charger_stat[i]);
return -ENODEV;
}
}
- cm->fuel_gauge = power_supply_get_by_name(desc->psy_fuel_gauge);
- if (!cm->fuel_gauge) {
+ fuel_gauge = power_supply_get_by_name(desc->psy_fuel_gauge);
+ if (!fuel_gauge) {
dev_err(&pdev->dev, "Cannot find power supply \"%s\"\n",
desc->psy_fuel_gauge);
return -ENODEV;
cm->charger_psy.num_properties = psy_default.num_properties;
/* Find which optional psy-properties are available */
- if (!cm->fuel_gauge->get_property(cm->fuel_gauge,
+ if (!fuel_gauge->get_property(fuel_gauge,
POWER_SUPPLY_PROP_CHARGE_NOW, &val)) {
cm->charger_psy.properties[cm->charger_psy.num_properties] =
POWER_SUPPLY_PROP_CHARGE_NOW;
cm->charger_psy.num_properties++;
}
- if (!cm->fuel_gauge->get_property(cm->fuel_gauge,
+ if (!fuel_gauge->get_property(fuel_gauge,
POWER_SUPPLY_PROP_CURRENT_NOW,
&val)) {
cm->charger_psy.properties[cm->charger_psy.num_properties] =
cm->charger_psy.num_properties++;
}
- ret = cm_init_thermal_data(cm);
+ ret = cm_init_thermal_data(cm, fuel_gauge);
if (ret) {
dev_err(&pdev->dev, "Failed to initialize thermal data\n");
cm->desc->measure_battery_temp = false;
int i;
bool found = false;
- for (i = 0; cm->charger_stat[i]; i++) {
- if (psy == cm->charger_stat[i]) {
+ for (i = 0; cm->desc->psy_charger_stat[i]; i++) {
+ if (!strcmp(psy->name, cm->desc->psy_charger_stat[i])) {
found = true;
break;
}
{
int i;
+ if (psy->no_thermal)
+ return 0;
+
/* Register battery zone device psy reports temperature */
for (i = 0; i < psy->num_properties; i++) {
if (psy->properties[i] == POWER_SUPPLY_PROP_TEMP) {
help
Reboot support for Hisilicon boards.
+config POWER_RESET_IMX
+ bool "IMX6 power-off driver"
+ depends on POWER_RESET && SOC_IMX6
+ help
+ This driver support power off external PMIC by PMIC_ON_REQ on i.mx6
+ boards.If you want to use other pin to control external power,please
+ say N here or disable in dts to make sure pm_power_off never be
+ overwrote wrongly by this driver.
+
config POWER_RESET_MSM
bool "Qualcomm MSM power-off driver"
depends on ARCH_QCOM
obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o
obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o
obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o
+obj-$(CONFIG_POWER_RESET_IMX) += imx-snvs-poweroff.o
obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o
obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o
obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o
#include <asm/system_misc.h>
-#include <mach/at91sam9_ddrsdr.h>
-#include <mach/at91sam9_sdramc.h>
+#include <soc/at91/at91sam9_ddrsdr.h>
+#include <soc/at91/at91sam9_sdramc.h>
#define AT91_RSTC_CR 0x00 /* Reset Controller Control Register */
#define AT91_RSTC_PROCRST BIT(0) /* Processor Reset */
/* Disable SDRAM0 accesses */
"1: str %3, [%0, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t"
/* Power down SDRAM0 */
- " str %4, [%0, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t"
+ " str %4, [%0, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t"
/* Disable SDRAM1 accesses */
" strne %3, [%1, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t"
/* Power down SDRAM1 */
- " strne %4, [%1, #" __stringify(AT91_DDRSDRC_RTR) "]\n\t"
+ " strne %4, [%1, #" __stringify(AT91_DDRSDRC_LPR) "]\n\t"
/* Reset CPU */
" str %5, [%2, #" __stringify(AT91_RSTC_CR) "]\n\t"
--- /dev/null
+/* Power off driver for i.mx6
+ * Copyright (c) 2014, FREESCALE CORPORATION. All rights reserved.
+ *
+ * based on msm-poweroff.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+
+static void __iomem *snvs_base;
+
+static void do_imx_poweroff(void)
+{
+ u32 value = readl(snvs_base);
+
+ /* set TOP and DP_EN bit */
+ writel(value | 0x60, snvs_base);
+}
+
+static int imx_poweroff_probe(struct platform_device *pdev)
+{
+ snvs_base = of_iomap(pdev->dev.of_node, 0);
+ if (!snvs_base) {
+ dev_err(&pdev->dev, "failed to get memory\n");
+ return -ENODEV;
+ }
+
+ pm_power_off = do_imx_poweroff;
+ return 0;
+}
+
+static const struct of_device_id of_imx_poweroff_match[] = {
+ { .compatible = "fsl,sec-v4.0-poweroff", },
+ {},
+};
+MODULE_DEVICE_TABLE(of, of_imx_poweroff_match);
+
+static struct platform_driver imx_poweroff_driver = {
+ .probe = imx_poweroff_probe,
+ .driver = {
+ .name = "imx-snvs-poweroff",
+ .of_match_table = of_match_ptr(of_imx_poweroff_match),
+ },
+};
+
+static int __init imx_poweroff_init(void)
+{
+ return platform_driver_register(&imx_poweroff_driver);
+}
+device_initcall(imx_poweroff_init);
config PWM_CLPS711X
tristate "CLPS711X PWM support"
depends on ARCH_CLPS711X || COMPILE_TEST
+ depends on HAS_IOMEM
help
Generic PWM framework driver for Cirrus Logic CLPS711X.
config PWM_FSL_FTM
tristate "Freescale FlexTimer Module (FTM) PWM support"
depends on OF
+ select REGMAP_MMIO
help
Generic FTM PWM framework driver for Freescale VF610 and
Layerscape LS-1 SoCs.
config PWM_LPSS
tristate "Intel LPSS PWM support"
- depends on ACPI
+ depends on X86
help
Generic PWM framework driver for Intel Low Power Subsystem PWM
controller.
To compile this driver as a module, choose M here: the module
will be called pwm-lpss.
+config PWM_LPSS_PCI
+ tristate "Intel LPSS PWM PCI driver"
+ depends on PWM_LPSS && PCI
+ help
+ The PCI driver for Intel Low Power Subsystem PWM controller.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-lpss-pci.
+
+config PWM_LPSS_PLATFORM
+ tristate "Intel LPSS PWM platform driver"
+ depends on PWM_LPSS && ACPI
+ help
+ The platform driver for Intel Low Power Subsystem PWM controller.
+
+ To compile this driver as a module, choose M here: the module
+ will be called pwm-lpss-platform.
+
config PWM_MXS
tristate "Freescale MXS PWM support"
depends on ARCH_MXS && OF
obj-$(CONFIG_PWM_LP3943) += pwm-lp3943.o
obj-$(CONFIG_PWM_LPC32XX) += pwm-lpc32xx.o
obj-$(CONFIG_PWM_LPSS) += pwm-lpss.o
+obj-$(CONFIG_PWM_LPSS_PCI) += pwm-lpss-pci.o
+obj-$(CONFIG_PWM_LPSS_PLATFORM) += pwm-lpss-platform.o
obj-$(CONFIG_PWM_MXS) += pwm-mxs.o
obj-$(CONFIG_PWM_PCA9685) += pwm-pca9685.o
obj-$(CONFIG_PWM_PUV3) += pwm-puv3.o
int ret;
if (!chip || !chip->dev || !chip->ops || !chip->ops->config ||
- !chip->ops->enable || !chip->ops->disable)
+ !chip->ops->enable || !chip->ops->disable || !chip->npwm)
return -EINVAL;
mutex_lock(&pwm_lock);
struct pwm_device *pwm = ERR_PTR(-EPROBE_DEFER);
const char *dev_id = dev ? dev_name(dev) : NULL;
struct pwm_chip *chip = NULL;
- unsigned int index = 0;
unsigned int best = 0;
- struct pwm_lookup *p;
+ struct pwm_lookup *p, *chosen = NULL;
unsigned int match;
- unsigned int period;
- enum pwm_polarity polarity;
/* look up via DT first */
if (IS_ENABLED(CONFIG_OF) && dev && dev->of_node)
}
if (match > best) {
- chip = pwmchip_find_by_name(p->provider);
- index = p->index;
- period = p->period;
- polarity = p->polarity;
+ chosen = p;
if (match != 3)
best = match;
}
}
- mutex_unlock(&pwm_lookup_lock);
+ if (!chosen)
+ goto out;
- if (chip)
- pwm = pwm_request_from_chip(chip, index, con_id ?: dev_id);
- if (IS_ERR(pwm))
- return pwm;
+ chip = pwmchip_find_by_name(chosen->provider);
+ if (!chip)
+ goto out;
- pwm_set_period(pwm, period);
- pwm_set_polarity(pwm, polarity);
+ pwm = pwm_request_from_chip(chip, chosen->index, con_id ?: dev_id);
+ if (IS_ERR(pwm))
+ goto out;
+ pwm_set_period(pwm, chosen->period);
+ pwm_set_polarity(pwm, chosen->polarity);
+out:
+ mutex_unlock(&pwm_lookup_lock);
return pwm;
}
EXPORT_SYMBOL_GPL(pwm_get);
int duty_ns, int period_ns)
{
struct atmel_pwm_chip *atmel_pwm = to_atmel_pwm_chip(chip);
- unsigned long clk_rate, prd, dty;
+ unsigned long prd, dty;
unsigned long long div;
unsigned int pres = 0;
u32 val;
return -EBUSY;
}
- clk_rate = clk_get_rate(atmel_pwm->clk);
- div = clk_rate;
+ /* Calculate the period cycles and prescale value */
+ div = (unsigned long long)clk_get_rate(atmel_pwm->clk) * period_ns;
+ do_div(div, NSEC_PER_SEC);
- /* Calculate the period cycles */
while (div > PWM_MAX_PRD) {
- div = clk_rate / (1 << pres);
- div = div * period_ns;
- /* 1/Hz = 100000000 ns */
- do_div(div, 1000000000);
-
- if (pres++ > PRD_MAX_PRES) {
- dev_err(chip->dev, "pres exceeds the maximum value\n");
- return -EINVAL;
- }
+ div >>= 1;
+ pres++;
+ }
+
+ if (pres > PRD_MAX_PRES) {
+ dev_err(chip->dev, "pres exceeds the maximum value\n");
+ return -EINVAL;
}
/* Calculate the duty cycles */
#include <linux/of_address.h>
#include <linux/platform_device.h>
#include <linux/pwm.h>
+#include <linux/regmap.h>
#include <linux/slab.h>
#define FTM_SC 0x00
-#define FTM_SC_CLK_MASK 0x3
-#define FTM_SC_CLK_SHIFT 3
-#define FTM_SC_CLK(c) (((c) + 1) << FTM_SC_CLK_SHIFT)
+#define FTM_SC_CLK_MASK_SHIFT 3
+#define FTM_SC_CLK_MASK (3 << FTM_SC_CLK_MASK_SHIFT)
+#define FTM_SC_CLK(c) (((c) + 1) << FTM_SC_CLK_MASK_SHIFT)
#define FTM_SC_PS_MASK 0x7
-#define FTM_SC_PS_SHIFT 0
#define FTM_CNT 0x04
#define FTM_MOD 0x08
unsigned int cnt_select;
unsigned int clk_ps;
- void __iomem *base;
+ struct regmap *regmap;
int period_ns;
unsigned long period_ns,
unsigned long duty_ns)
{
- unsigned long long val, duty;
+ unsigned long long duty;
+ u32 val;
- val = readl(fpc->base + FTM_MOD);
- duty = duty_ns * (val + 1);
+ regmap_read(fpc->regmap, FTM_MOD, &val);
+ duty = (unsigned long long)duty_ns * (val + 1);
do_div(duty, period_ns);
return (unsigned long)duty;
int duty_ns, int period_ns)
{
struct fsl_pwm_chip *fpc = to_fsl_chip(chip);
- u32 val, period, duty;
+ u32 period, duty;
mutex_lock(&fpc->lock);
return -EINVAL;
}
- val = readl(fpc->base + FTM_SC);
- val &= ~(FTM_SC_PS_MASK << FTM_SC_PS_SHIFT);
- val |= fpc->clk_ps;
- writel(val, fpc->base + FTM_SC);
- writel(period - 1, fpc->base + FTM_MOD);
+ regmap_update_bits(fpc->regmap, FTM_SC, FTM_SC_PS_MASK,
+ fpc->clk_ps);
+ regmap_write(fpc->regmap, FTM_MOD, period - 1);
fpc->period_ns = period_ns;
}
duty = fsl_pwm_calculate_duty(fpc, period_ns, duty_ns);
- writel(FTM_CSC_MSB | FTM_CSC_ELSB, fpc->base + FTM_CSC(pwm->hwpwm));
- writel(duty, fpc->base + FTM_CV(pwm->hwpwm));
+ regmap_write(fpc->regmap, FTM_CSC(pwm->hwpwm),
+ FTM_CSC_MSB | FTM_CSC_ELSB);
+ regmap_write(fpc->regmap, FTM_CV(pwm->hwpwm), duty);
return 0;
}
struct fsl_pwm_chip *fpc = to_fsl_chip(chip);
u32 val;
- val = readl(fpc->base + FTM_POL);
+ regmap_read(fpc->regmap, FTM_POL, &val);
if (polarity == PWM_POLARITY_INVERSED)
val |= BIT(pwm->hwpwm);
else
val &= ~BIT(pwm->hwpwm);
- writel(val, fpc->base + FTM_POL);
+ regmap_write(fpc->regmap, FTM_POL, val);
return 0;
}
static int fsl_counter_clock_enable(struct fsl_pwm_chip *fpc)
{
- u32 val;
int ret;
if (fpc->use_count != 0)
return 0;
/* select counter clock source */
- val = readl(fpc->base + FTM_SC);
- val &= ~(FTM_SC_CLK_MASK << FTM_SC_CLK_SHIFT);
- val |= FTM_SC_CLK(fpc->cnt_select);
- writel(val, fpc->base + FTM_SC);
+ regmap_update_bits(fpc->regmap, FTM_SC, FTM_SC_CLK_MASK,
+ FTM_SC_CLK(fpc->cnt_select));
ret = clk_prepare_enable(fpc->clk[fpc->cnt_select]);
if (ret)
static int fsl_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct fsl_pwm_chip *fpc = to_fsl_chip(chip);
- u32 val;
int ret;
mutex_lock(&fpc->lock);
- val = readl(fpc->base + FTM_OUTMASK);
- val &= ~BIT(pwm->hwpwm);
- writel(val, fpc->base + FTM_OUTMASK);
+ regmap_update_bits(fpc->regmap, FTM_OUTMASK, BIT(pwm->hwpwm), 0);
ret = fsl_counter_clock_enable(fpc);
mutex_unlock(&fpc->lock);
static void fsl_counter_clock_disable(struct fsl_pwm_chip *fpc)
{
- u32 val;
-
/*
* already disabled, do nothing
*/
return;
/* no users left, disable PWM counter clock */
- val = readl(fpc->base + FTM_SC);
- val &= ~(FTM_SC_CLK_MASK << FTM_SC_CLK_SHIFT);
- writel(val, fpc->base + FTM_SC);
+ regmap_update_bits(fpc->regmap, FTM_SC, FTM_SC_CLK_MASK, 0);
clk_disable_unprepare(fpc->clk[FSL_PWM_CLK_CNTEN]);
clk_disable_unprepare(fpc->clk[fpc->cnt_select]);
u32 val;
mutex_lock(&fpc->lock);
- val = readl(fpc->base + FTM_OUTMASK);
- val |= BIT(pwm->hwpwm);
- writel(val, fpc->base + FTM_OUTMASK);
+ regmap_update_bits(fpc->regmap, FTM_OUTMASK, BIT(pwm->hwpwm),
+ BIT(pwm->hwpwm));
fsl_counter_clock_disable(fpc);
- val = readl(fpc->base + FTM_OUTMASK);
-
+ regmap_read(fpc->regmap, FTM_OUTMASK, &val);
if ((val & 0xFF) == 0xFF)
fpc->period_ns = 0;
if (ret)
return ret;
- writel(0x00, fpc->base + FTM_CNTIN);
- writel(0x00, fpc->base + FTM_OUTINIT);
- writel(0xFF, fpc->base + FTM_OUTMASK);
+ regmap_write(fpc->regmap, FTM_CNTIN, 0x00);
+ regmap_write(fpc->regmap, FTM_OUTINIT, 0x00);
+ regmap_write(fpc->regmap, FTM_OUTMASK, 0xFF);
clk_disable_unprepare(fpc->clk[FSL_PWM_CLK_SYS]);
return 0;
}
+static const struct regmap_config fsl_pwm_regmap_config = {
+ .reg_bits = 32,
+ .reg_stride = 4,
+ .val_bits = 32,
+
+ .max_register = FTM_PWMLOAD,
+};
+
static int fsl_pwm_probe(struct platform_device *pdev)
{
struct fsl_pwm_chip *fpc;
struct resource *res;
+ void __iomem *base;
int ret;
fpc = devm_kzalloc(&pdev->dev, sizeof(*fpc), GFP_KERNEL);
fpc->chip.dev = &pdev->dev;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- fpc->base = devm_ioremap_resource(&pdev->dev, res);
- if (IS_ERR(fpc->base))
- return PTR_ERR(fpc->base);
+ base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(base))
+ return PTR_ERR(base);
+
+ fpc->regmap = devm_regmap_init_mmio_clk(&pdev->dev, NULL, base,
+ &fsl_pwm_regmap_config);
+ if (IS_ERR(fpc->regmap)) {
+ dev_err(&pdev->dev, "regmap init failed\n");
+ return PTR_ERR(fpc->regmap);
+ }
fpc->clk[FSL_PWM_CLK_SYS] = devm_clk_get(&pdev->dev, "ftm_sys");
if (IS_ERR(fpc->clk[FSL_PWM_CLK_SYS])) {
#include <linux/slab.h>
#include <linux/err.h>
#include <linux/clk.h>
+#include <linux/delay.h>
#include <linux/io.h>
#include <linux/pwm.h>
#include <linux/of.h>
/* i.MX1 and i.MX21 share the same PWM function block: */
-#define MX1_PWMC 0x00 /* PWM Control Register */
-#define MX1_PWMS 0x04 /* PWM Sample Register */
-#define MX1_PWMP 0x08 /* PWM Period Register */
+#define MX1_PWMC 0x00 /* PWM Control Register */
+#define MX1_PWMS 0x04 /* PWM Sample Register */
+#define MX1_PWMP 0x08 /* PWM Period Register */
-#define MX1_PWMC_EN (1 << 4)
+#define MX1_PWMC_EN (1 << 4)
/* i.MX27, i.MX31, i.MX35 share the same PWM function block: */
-#define MX3_PWMCR 0x00 /* PWM Control Register */
-#define MX3_PWMSAR 0x0C /* PWM Sample Register */
-#define MX3_PWMPR 0x10 /* PWM Period Register */
-#define MX3_PWMCR_PRESCALER(x) (((x - 1) & 0xFFF) << 4)
-#define MX3_PWMCR_DOZEEN (1 << 24)
-#define MX3_PWMCR_WAITEN (1 << 23)
+#define MX3_PWMCR 0x00 /* PWM Control Register */
+#define MX3_PWMSR 0x04 /* PWM Status Register */
+#define MX3_PWMSAR 0x0C /* PWM Sample Register */
+#define MX3_PWMPR 0x10 /* PWM Period Register */
+#define MX3_PWMCR_PRESCALER(x) ((((x) - 1) & 0xFFF) << 4)
+#define MX3_PWMCR_DOZEEN (1 << 24)
+#define MX3_PWMCR_WAITEN (1 << 23)
#define MX3_PWMCR_DBGEN (1 << 22)
-#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
-#define MX3_PWMCR_CLKSRC_IPG (1 << 16)
-#define MX3_PWMCR_EN (1 << 0)
+#define MX3_PWMCR_CLKSRC_IPG_HIGH (2 << 16)
+#define MX3_PWMCR_CLKSRC_IPG (1 << 16)
+#define MX3_PWMCR_SWR (1 << 3)
+#define MX3_PWMCR_EN (1 << 0)
+#define MX3_PWMSR_FIFOAV_4WORDS 0x4
+#define MX3_PWMSR_FIFOAV_MASK 0x7
+
+#define MX3_PWM_SWR_LOOP 5
struct imx_chip {
struct clk *clk_per;
struct pwm_device *pwm, int duty_ns, int period_ns)
{
struct imx_chip *imx = to_imx_chip(chip);
+ struct device *dev = chip->dev;
unsigned long long c;
unsigned long period_cycles, duty_cycles, prescale;
- u32 cr;
+ unsigned int period_ms;
+ bool enable = test_bit(PWMF_ENABLED, &pwm->flags);
+ int wait_count = 0, fifoav;
+ u32 cr, sr;
+
+ /*
+ * i.MX PWMv2 has a 4-word sample FIFO.
+ * In order to avoid FIFO overflow issue, we do software reset
+ * to clear all sample FIFO if the controller is disabled or
+ * wait for a full PWM cycle to get a relinquished FIFO slot
+ * when the controller is enabled and the FIFO is fully loaded.
+ */
+ if (enable) {
+ sr = readl(imx->mmio_base + MX3_PWMSR);
+ fifoav = sr & MX3_PWMSR_FIFOAV_MASK;
+ if (fifoav == MX3_PWMSR_FIFOAV_4WORDS) {
+ period_ms = DIV_ROUND_UP(pwm->period, NSEC_PER_MSEC);
+ msleep(period_ms);
+
+ sr = readl(imx->mmio_base + MX3_PWMSR);
+ if (fifoav == (sr & MX3_PWMSR_FIFOAV_MASK))
+ dev_warn(dev, "there is no free FIFO slot\n");
+ }
+ } else {
+ writel(MX3_PWMCR_SWR, imx->mmio_base + MX3_PWMCR);
+ do {
+ usleep_range(200, 1000);
+ cr = readl(imx->mmio_base + MX3_PWMCR);
+ } while ((cr & MX3_PWMCR_SWR) &&
+ (wait_count++ < MX3_PWM_SWR_LOOP));
+
+ if (cr & MX3_PWMCR_SWR)
+ dev_warn(dev, "software reset timeout\n");
+ }
c = clk_get_rate(imx->clk_per);
c = c * period_ns;
MX3_PWMCR_DOZEEN | MX3_PWMCR_WAITEN |
MX3_PWMCR_DBGEN | MX3_PWMCR_CLKSRC_IPG_HIGH;
- if (test_bit(PWMF_ENABLED, &pwm->flags))
+ if (enable)
cr |= MX3_PWMCR_EN;
writel(cr, imx->mmio_base + MX3_PWMCR);
--- /dev/null
+/*
+ * Intel Low Power Subsystem PWM controller PCI driver
+ *
+ * Copyright (C) 2014, Intel Corporation
+ *
+ * Derived from the original pwm-lpss.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+
+#include "pwm-lpss.h"
+
+static int pwm_lpss_probe_pci(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ const struct pwm_lpss_boardinfo *info;
+ struct pwm_lpss_chip *lpwm;
+ int err;
+
+ err = pcim_enable_device(pdev);
+ if (err < 0)
+ return err;
+
+ info = (struct pwm_lpss_boardinfo *)id->driver_data;
+ lpwm = pwm_lpss_probe(&pdev->dev, &pdev->resource[0], info);
+ if (IS_ERR(lpwm))
+ return PTR_ERR(lpwm);
+
+ pci_set_drvdata(pdev, lpwm);
+ return 0;
+}
+
+static void pwm_lpss_remove_pci(struct pci_dev *pdev)
+{
+ struct pwm_lpss_chip *lpwm = pci_get_drvdata(pdev);
+
+ pwm_lpss_remove(lpwm);
+}
+
+static const struct pci_device_id pwm_lpss_pci_ids[] = {
+ { PCI_VDEVICE(INTEL, 0x0f08), (unsigned long)&pwm_lpss_byt_info},
+ { PCI_VDEVICE(INTEL, 0x0f09), (unsigned long)&pwm_lpss_byt_info},
+ { PCI_VDEVICE(INTEL, 0x2288), (unsigned long)&pwm_lpss_bsw_info},
+ { PCI_VDEVICE(INTEL, 0x2289), (unsigned long)&pwm_lpss_bsw_info},
+ { },
+};
+MODULE_DEVICE_TABLE(pci, pwm_lpss_pci_ids);
+
+static struct pci_driver pwm_lpss_driver_pci = {
+ .name = "pwm-lpss",
+ .id_table = pwm_lpss_pci_ids,
+ .probe = pwm_lpss_probe_pci,
+ .remove = pwm_lpss_remove_pci,
+};
+module_pci_driver(pwm_lpss_driver_pci);
+
+MODULE_DESCRIPTION("PWM PCI driver for Intel LPSS");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+/*
+ * Intel Low Power Subsystem PWM controller driver
+ *
+ * Copyright (C) 2014, Intel Corporation
+ *
+ * Derived from the original pwm-lpss.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/acpi.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "pwm-lpss.h"
+
+static int pwm_lpss_probe_platform(struct platform_device *pdev)
+{
+ const struct pwm_lpss_boardinfo *info;
+ const struct acpi_device_id *id;
+ struct pwm_lpss_chip *lpwm;
+ struct resource *r;
+
+ id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
+ if (!id)
+ return -ENODEV;
+
+ info = (const struct pwm_lpss_boardinfo *)id->driver_data;
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+
+ lpwm = pwm_lpss_probe(&pdev->dev, r, info);
+ if (IS_ERR(lpwm))
+ return PTR_ERR(lpwm);
+
+ platform_set_drvdata(pdev, lpwm);
+ return 0;
+}
+
+static int pwm_lpss_remove_platform(struct platform_device *pdev)
+{
+ struct pwm_lpss_chip *lpwm = platform_get_drvdata(pdev);
+
+ return pwm_lpss_remove(lpwm);
+}
+
+static const struct acpi_device_id pwm_lpss_acpi_match[] = {
+ { "80860F09", (unsigned long)&pwm_lpss_byt_info },
+ { "80862288", (unsigned long)&pwm_lpss_bsw_info },
+ { },
+};
+MODULE_DEVICE_TABLE(acpi, pwm_lpss_acpi_match);
+
+static struct platform_driver pwm_lpss_driver_platform = {
+ .driver = {
+ .name = "pwm-lpss",
+ .acpi_match_table = pwm_lpss_acpi_match,
+ },
+ .probe = pwm_lpss_probe_platform,
+ .remove = pwm_lpss_remove_platform,
+};
+module_platform_driver(pwm_lpss_driver_platform);
+
+MODULE_DESCRIPTION("PWM platform driver for Intel LPSS");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:pwm-lpss");
* published by the Free Software Foundation.
*/
-#include <linux/acpi.h>
-#include <linux/device.h>
+#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/pwm.h>
-#include <linux/platform_device.h>
-#include <linux/pci.h>
-static int pci_drv, plat_drv; /* So we know which drivers registered */
+#include "pwm-lpss.h"
#define PWM 0x00000000
#define PWM_ENABLE BIT(31)
unsigned long clk_rate;
};
-struct pwm_lpss_boardinfo {
- unsigned long clk_rate;
+/* BayTrail */
+const struct pwm_lpss_boardinfo pwm_lpss_byt_info = {
+ .clk_rate = 25000000
};
+EXPORT_SYMBOL_GPL(pwm_lpss_byt_info);
-/* BayTrail */
-static const struct pwm_lpss_boardinfo byt_info = {
- 25000000
+/* Braswell */
+const struct pwm_lpss_boardinfo pwm_lpss_bsw_info = {
+ .clk_rate = 19200000
};
+EXPORT_SYMBOL_GPL(pwm_lpss_bsw_info);
static inline struct pwm_lpss_chip *to_lpwm(struct pwm_chip *chip)
{
.owner = THIS_MODULE,
};
-static struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev,
- struct resource *r,
- const struct pwm_lpss_boardinfo *info)
+struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev, struct resource *r,
+ const struct pwm_lpss_boardinfo *info)
{
struct pwm_lpss_chip *lpwm;
int ret;
return lpwm;
}
+EXPORT_SYMBOL_GPL(pwm_lpss_probe);
-static int pwm_lpss_remove(struct pwm_lpss_chip *lpwm)
+int pwm_lpss_remove(struct pwm_lpss_chip *lpwm)
{
u32 ctrl;
return pwmchip_remove(&lpwm->chip);
}
-
-static int pwm_lpss_probe_pci(struct pci_dev *pdev,
- const struct pci_device_id *id)
-{
- const struct pwm_lpss_boardinfo *info;
- struct pwm_lpss_chip *lpwm;
- int err;
-
- err = pci_enable_device(pdev);
- if (err < 0)
- return err;
-
- info = (struct pwm_lpss_boardinfo *)id->driver_data;
- lpwm = pwm_lpss_probe(&pdev->dev, &pdev->resource[0], info);
- if (IS_ERR(lpwm))
- return PTR_ERR(lpwm);
-
- pci_set_drvdata(pdev, lpwm);
- return 0;
-}
-
-static void pwm_lpss_remove_pci(struct pci_dev *pdev)
-{
- struct pwm_lpss_chip *lpwm = pci_get_drvdata(pdev);
-
- pwm_lpss_remove(lpwm);
- pci_disable_device(pdev);
-}
-
-static struct pci_device_id pwm_lpss_pci_ids[] = {
- { PCI_VDEVICE(INTEL, 0x0f08), (unsigned long)&byt_info},
- { PCI_VDEVICE(INTEL, 0x0f09), (unsigned long)&byt_info},
- { },
-};
-MODULE_DEVICE_TABLE(pci, pwm_lpss_pci_ids);
-
-static struct pci_driver pwm_lpss_driver_pci = {
- .name = "pwm-lpss",
- .id_table = pwm_lpss_pci_ids,
- .probe = pwm_lpss_probe_pci,
- .remove = pwm_lpss_remove_pci,
-};
-
-static int pwm_lpss_probe_platform(struct platform_device *pdev)
-{
- const struct pwm_lpss_boardinfo *info;
- const struct acpi_device_id *id;
- struct pwm_lpss_chip *lpwm;
- struct resource *r;
-
- id = acpi_match_device(pdev->dev.driver->acpi_match_table, &pdev->dev);
- if (!id)
- return -ENODEV;
-
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-
- info = (struct pwm_lpss_boardinfo *)id->driver_data;
- lpwm = pwm_lpss_probe(&pdev->dev, r, info);
- if (IS_ERR(lpwm))
- return PTR_ERR(lpwm);
-
- platform_set_drvdata(pdev, lpwm);
- return 0;
-}
-
-static int pwm_lpss_remove_platform(struct platform_device *pdev)
-{
- struct pwm_lpss_chip *lpwm = platform_get_drvdata(pdev);
-
- return pwm_lpss_remove(lpwm);
-}
-
-static const struct acpi_device_id pwm_lpss_acpi_match[] = {
- { "80860F09", (unsigned long)&byt_info },
- { },
-};
-MODULE_DEVICE_TABLE(acpi, pwm_lpss_acpi_match);
-
-static struct platform_driver pwm_lpss_driver_platform = {
- .driver = {
- .name = "pwm-lpss",
- .acpi_match_table = pwm_lpss_acpi_match,
- },
- .probe = pwm_lpss_probe_platform,
- .remove = pwm_lpss_remove_platform,
-};
-
-static int __init pwm_init(void)
-{
- pci_drv = pci_register_driver(&pwm_lpss_driver_pci);
- plat_drv = platform_driver_register(&pwm_lpss_driver_platform);
- if (pci_drv && plat_drv)
- return pci_drv;
-
- return 0;
-}
-module_init(pwm_init);
-
-static void __exit pwm_exit(void)
-{
- if (!pci_drv)
- pci_unregister_driver(&pwm_lpss_driver_pci);
- if (!plat_drv)
- platform_driver_unregister(&pwm_lpss_driver_platform);
-}
-module_exit(pwm_exit);
+EXPORT_SYMBOL_GPL(pwm_lpss_remove);
MODULE_DESCRIPTION("PWM driver for Intel LPSS");
MODULE_AUTHOR("Mika Westerberg <mika.westerberg@linux.intel.com>");
MODULE_LICENSE("GPL v2");
-MODULE_ALIAS("platform:pwm-lpss");
--- /dev/null
+/*
+ * Intel Low Power Subsystem PWM controller driver
+ *
+ * Copyright (C) 2014, Intel Corporation
+ *
+ * Derived from the original pwm-lpss.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __PWM_LPSS_H
+#define __PWM_LPSS_H
+
+#include <linux/device.h>
+#include <linux/pwm.h>
+
+struct pwm_lpss_chip;
+
+struct pwm_lpss_boardinfo {
+ unsigned long clk_rate;
+};
+
+extern const struct pwm_lpss_boardinfo pwm_lpss_byt_info;
+extern const struct pwm_lpss_boardinfo pwm_lpss_bsw_info;
+
+struct pwm_lpss_chip *pwm_lpss_probe(struct device *dev, struct resource *r,
+ const struct pwm_lpss_boardinfo *info);
+int pwm_lpss_remove(struct pwm_lpss_chip *lpwm);
+
+#endif /* __PWM_LPSS_H */
#define PWM_ENABLE (1 << 0)
#define PWM_CONTINUOUS (1 << 1)
#define PWM_DUTY_POSITIVE (1 << 3)
+#define PWM_DUTY_NEGATIVE (0 << 3)
#define PWM_INACTIVE_NEGATIVE (0 << 4)
+#define PWM_INACTIVE_POSITIVE (1 << 4)
#define PWM_OUTPUT_LEFT (0 << 5)
#define PWM_LP_DISABLE (0 << 8)
struct rockchip_pwm_data {
struct rockchip_pwm_regs regs;
unsigned int prescaler;
+ const struct pwm_ops *ops;
- void (*set_enable)(struct pwm_chip *chip, bool enable);
+ void (*set_enable)(struct pwm_chip *chip,
+ struct pwm_device *pwm, bool enable);
};
static inline struct rockchip_pwm_chip *to_rockchip_pwm_chip(struct pwm_chip *c)
return container_of(c, struct rockchip_pwm_chip, chip);
}
-static void rockchip_pwm_set_enable_v1(struct pwm_chip *chip, bool enable)
+static void rockchip_pwm_set_enable_v1(struct pwm_chip *chip,
+ struct pwm_device *pwm, bool enable)
{
struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
u32 enable_conf = PWM_CTRL_OUTPUT_EN | PWM_CTRL_TIMER_EN;
writel_relaxed(val, pc->base + pc->data->regs.ctrl);
}
-static void rockchip_pwm_set_enable_v2(struct pwm_chip *chip, bool enable)
+static void rockchip_pwm_set_enable_v2(struct pwm_chip *chip,
+ struct pwm_device *pwm, bool enable)
{
struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
u32 enable_conf = PWM_OUTPUT_LEFT | PWM_LP_DISABLE | PWM_ENABLE |
- PWM_CONTINUOUS | PWM_DUTY_POSITIVE |
- PWM_INACTIVE_NEGATIVE;
+ PWM_CONTINUOUS;
u32 val;
+ if (pwm->polarity == PWM_POLARITY_INVERSED)
+ enable_conf |= PWM_DUTY_NEGATIVE | PWM_INACTIVE_POSITIVE;
+ else
+ enable_conf |= PWM_DUTY_POSITIVE | PWM_INACTIVE_NEGATIVE;
+
val = readl_relaxed(pc->base + pc->data->regs.ctrl);
if (enable)
return 0;
}
+static int rockchip_pwm_set_polarity(struct pwm_chip *chip,
+ struct pwm_device *pwm,
+ enum pwm_polarity polarity)
+{
+ /*
+ * No action needed here because pwm->polarity will be set by the core
+ * and the core will only change polarity when the PWM is not enabled.
+ * We'll handle things in set_enable().
+ */
+
+ return 0;
+}
+
static int rockchip_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
if (ret)
return ret;
- pc->data->set_enable(chip, true);
+ pc->data->set_enable(chip, pwm, true);
return 0;
}
{
struct rockchip_pwm_chip *pc = to_rockchip_pwm_chip(chip);
- pc->data->set_enable(chip, false);
+ pc->data->set_enable(chip, pwm, false);
clk_disable(pc->clk);
}
-static const struct pwm_ops rockchip_pwm_ops = {
+static const struct pwm_ops rockchip_pwm_ops_v1 = {
.config = rockchip_pwm_config,
.enable = rockchip_pwm_enable,
.disable = rockchip_pwm_disable,
.owner = THIS_MODULE,
};
+static const struct pwm_ops rockchip_pwm_ops_v2 = {
+ .config = rockchip_pwm_config,
+ .set_polarity = rockchip_pwm_set_polarity,
+ .enable = rockchip_pwm_enable,
+ .disable = rockchip_pwm_disable,
+ .owner = THIS_MODULE,
+};
+
static const struct rockchip_pwm_data pwm_data_v1 = {
.regs = {
.duty = 0x04,
.ctrl = 0x0c,
},
.prescaler = 2,
+ .ops = &rockchip_pwm_ops_v1,
.set_enable = rockchip_pwm_set_enable_v1,
};
.ctrl = 0x0c,
},
.prescaler = 1,
+ .ops = &rockchip_pwm_ops_v2,
.set_enable = rockchip_pwm_set_enable_v2,
};
.ctrl = 0x00,
},
.prescaler = 1,
+ .ops = &rockchip_pwm_ops_v2,
.set_enable = rockchip_pwm_set_enable_v2,
};
pc->data = id->data;
pc->chip.dev = &pdev->dev;
- pc->chip.ops = &rockchip_pwm_ops;
+ pc->chip.ops = pc->data->ops;
pc->chip.base = -1;
pc->chip.npwm = 1;
+ if (pc->data->ops->set_polarity) {
+ pc->chip.of_xlate = of_pwm_xlate_with_flags;
+ pc->chip.of_pwm_n_cells = 3;
+ }
+
ret = pwmchip_add(&pc->chip);
if (ret < 0) {
clk_unprepare(pc->clk);
for_each_child_of_node(nproot, np) {
if (!of_node_cmp(np->name, info->desc.name)) {
config->init_data =
- of_get_regulator_init_data(&pdev->dev, np);
+ of_get_regulator_init_data(&pdev->dev, np,
+ &info->desc);
config->of_node = np;
break;
}
help
Say y here to support the regulators found on Ricoh RN5T618 PMIC.
+config REGULATOR_RT5033
+ tristate "Richtek RT5033 Regulators"
+ depends on MFD_RT5033
+ help
+ This adds support for voltage and current regulators in Richtek
+ RT5033 PMIC. The device supports multiple regulators like
+ current source, LDO and Buck.
+
config REGULATOR_S2MPA01
tristate "Samsung S2MPA01 voltage regulator"
depends on MFD_SEC_CORE
via I2C bus. S2MPA01 has 10 Bucks and 26 LDO outputs.
config REGULATOR_S2MPS11
- tristate "Samsung S2MPS11/S2MPS14/S2MPU02 voltage regulator"
+ tristate "Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage regulator"
depends on MFD_SEC_CORE
help
- This driver supports a Samsung S2MPS11/S2MPS14/S2MPU02 voltage output
- regulator via I2C bus. The chip is comprised of high efficient Buck
- converters including Dual-Phase Buck converter, Buck-Boost converter,
- various LDOs.
+ This driver supports a Samsung S2MPS11/S2MPS13/S2MPS14/S2MPU02 voltage
+ output regulator via I2C bus. The chip is comprised of high efficient
+ Buck converters including Dual-Phase Buck converter, Buck-Boost
+ converter, various LDOs.
config REGULATOR_S5M8767
tristate "Samsung S5M8767A voltage regulator"
config REGULATOR_SKY81452
tristate "Skyworks Solutions SKY81452 voltage regulator"
- depends on SKY81452
+ depends on MFD_SKY81452
help
This driver supports Skyworks SKY81452 voltage output regulator
via I2C bus. SKY81452 has one voltage linear regulator can be
obj-$(CONFIG_REGULATOR_RC5T583) += rc5t583-regulator.o
obj-$(CONFIG_REGULATOR_RK808) += rk808-regulator.o
obj-$(CONFIG_REGULATOR_RN5T618) += rn5t618-regulator.o
+obj-$(CONFIG_REGULATOR_RT5033) += rt5033-regulator.o
obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
obj-$(CONFIG_REGULATOR_S2MPS11) += s2mps11.o
obj-$(CONFIG_REGULATOR_S5M8767) += s5m8767.o
#define ACT8846_REG12_VSET 0xa0
#define ACT8846_REG12_CTRL 0xa1
#define ACT8846_REG13_CTRL 0xb1
+#define ACT8846_GLB_OFF_CTRL 0xc3
+#define ACT8846_OFF_SYSMASK 0x18
/*
* ACT8865 Global Register Map.
#define ACT8865_LDO3_CTRL 0x61
#define ACT8865_LDO4_VSET 0x64
#define ACT8865_LDO4_CTRL 0x65
+#define ACT8865_MSTROFF 0x20
/*
* Field Definitions.
struct act8865 {
struct regmap *regmap;
+ int off_reg;
+ int off_mask;
};
static const struct regmap_config act8865_regmap_config = {
return NULL;
}
+static struct i2c_client *act8865_i2c_client;
+static void act8865_power_off(void)
+{
+ struct act8865 *act8865;
+
+ act8865 = i2c_get_clientdata(act8865_i2c_client);
+ regmap_write(act8865->regmap, act8865->off_reg, act8865->off_mask);
+ while (1);
+}
+
static int act8865_pmic_probe(struct i2c_client *client,
const struct i2c_device_id *i2c_id)
{
int i, ret, num_regulators;
struct act8865 *act8865;
unsigned long type;
+ int off_reg, off_mask;
pdata = dev_get_platdata(dev);
case ACT8846:
regulators = act8846_regulators;
num_regulators = ARRAY_SIZE(act8846_regulators);
+ off_reg = ACT8846_GLB_OFF_CTRL;
+ off_mask = ACT8846_OFF_SYSMASK;
break;
case ACT8865:
regulators = act8865_regulators;
num_regulators = ARRAY_SIZE(act8865_regulators);
+ off_reg = ACT8865_SYS_CTRL;
+ off_mask = ACT8865_MSTROFF;
break;
default:
dev_err(dev, "invalid device id %lu\n", type);
return ret;
}
+ if (of_device_is_system_power_controller(dev->of_node)) {
+ if (!pm_power_off) {
+ act8865_i2c_client = client;
+ act8865->off_reg = off_reg;
+ act8865->off_mask = off_mask;
+ pm_power_off = act8865_power_off;
+ } else {
+ dev_err(dev, "Failed to set poweroff capability, already defined\n");
+ }
+ }
+
/* Finally register devices */
for (i = 0; i < num_regulators; i++) {
const struct regulator_desc *desc = ®ulators[i];
int ret = 0;
u32 val;
- initdata = of_get_regulator_init_data(dev, np);
sreg = devm_kzalloc(dev, sizeof(*sreg), GFP_KERNEL);
if (!sreg)
return -ENOMEM;
- sreg->initdata = initdata;
sreg->name = of_get_property(np, "regulator-name", NULL);
rdesc = &sreg->rdesc;
rdesc->name = sreg->name;
rdesc->type = REGULATOR_VOLTAGE;
rdesc->owner = THIS_MODULE;
+ initdata = of_get_regulator_init_data(dev, np, rdesc);
+ sreg->initdata = initdata;
+
anatop_np = of_get_parent(np);
if (!anatop_np)
return -ENODEV;
sreg->sel = 0;
sreg->bypass = true;
}
+
+ /*
+ * In case vddpu was disabled by the bootloader, we need to set
+ * a sane default until imx6-cpufreq was probed and changes the
+ * voltage to the correct value. In this case we set 1.25V.
+ */
+ if (!sreg->sel && !strcmp(sreg->name, "vddpu"))
+ sreg->sel = 22;
+
+ if (!sreg->sel) {
+ dev_err(&pdev->dev, "Failed to read a valid default voltage selector.\n");
+ return -EINVAL;
+ }
} else {
rdesc->ops = &anatop_rops;
}
};
static int arizona_ldo1_of_get_pdata(struct arizona *arizona,
- struct regulator_config *config)
+ struct regulator_config *config,
+ const struct regulator_desc *desc)
{
struct arizona_pdata *pdata = &arizona->pdata;
struct arizona_ldo1 *ldo1 = config->driver_data;
if (init_node) {
config->of_node = init_node;
- init_data = of_get_regulator_init_data(arizona->dev, init_node);
+ init_data = of_get_regulator_init_data(arizona->dev, init_node,
+ desc);
if (init_data) {
init_data->consumer_supplies = &ldo1->supply;
if (IS_ENABLED(CONFIG_OF)) {
if (!dev_get_platdata(arizona->dev)) {
- ret = arizona_ldo1_of_get_pdata(arizona, &config);
+ ret = arizona_ldo1_of_get_pdata(arizona, &config, desc);
if (ret < 0)
return ret;
+
+ config.ena_gpio_initialized = true;
}
}
};
static int arizona_micsupp_of_get_pdata(struct arizona *arizona,
- struct regulator_config *config)
+ struct regulator_config *config,
+ const struct regulator_desc *desc)
{
struct arizona_pdata *pdata = &arizona->pdata;
struct arizona_micsupp *micsupp = config->driver_data;
if (np) {
config->of_node = np;
- init_data = of_get_regulator_init_data(arizona->dev, np);
+ init_data = of_get_regulator_init_data(arizona->dev, np, desc);
if (init_data) {
init_data->consumer_supplies = &micsupp->supply;
if (IS_ENABLED(CONFIG_OF)) {
if (!dev_get_platdata(arizona->dev)) {
- ret = arizona_micsupp_of_get_pdata(arizona, &config);
+ ret = arizona_micsupp_of_get_pdata(arizona, &config,
+ desc);
if (ret < 0)
return ret;
}
if (!count)
sprintf(buf, "no parameters");
- rdev_info(rdev, "%s\n", buf);
+ rdev_dbg(rdev, "%s\n", buf);
if ((constraints->min_uV != constraints->max_uV) &&
!(constraints->valid_ops_mask & REGULATOR_CHANGE_VOLTAGE))
gpiod_put(pin->gpiod);
list_del(&pin->list);
kfree(pin);
+ rdev->ena_pin = NULL;
+ return;
} else {
pin->request_count--;
}
/* we are last user */
if (_regulator_can_change_status(rdev)) {
+ ret = _notifier_call_chain(rdev,
+ REGULATOR_EVENT_PRE_DISABLE,
+ NULL);
+ if (ret & NOTIFY_STOP_MASK)
+ return -EINVAL;
+
ret = _regulator_do_disable(rdev);
if (ret < 0) {
rdev_err(rdev, "failed to disable\n");
+ _notifier_call_chain(rdev,
+ REGULATOR_EVENT_ABORT_DISABLE,
+ NULL);
return ret;
}
_notifier_call_chain(rdev, REGULATOR_EVENT_DISABLE,
{
int ret = 0;
+ ret = _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE |
+ REGULATOR_EVENT_PRE_DISABLE, NULL);
+ if (ret & NOTIFY_STOP_MASK)
+ return -EINVAL;
+
ret = _regulator_do_disable(rdev);
if (ret < 0) {
rdev_err(rdev, "failed to force disable\n");
+ _notifier_call_chain(rdev, REGULATOR_EVENT_FORCE_DISABLE |
+ REGULATOR_EVENT_ABORT_DISABLE, NULL);
return ret;
}
dev_set_drvdata(&rdev->dev, rdev);
- if (config->ena_gpio && gpio_is_valid(config->ena_gpio)) {
+ if ((config->ena_gpio || config->ena_gpio_initialized) &&
+ gpio_is_valid(config->ena_gpio)) {
ret = regulator_ena_gpio_request(rdev, config);
if (ret != 0) {
rdev_err(rdev, "Failed to request enable GPIO%d: %d\n",
if (!of_node_cmp(np->name,
regulator->info->reg_desc.name)) {
config.init_data = of_get_regulator_init_data(
- &pdev->dev, np);
+ &pdev->dev, np,
+ ®ulator->info->reg_desc);
config.of_node = np;
break;
}
return irq;
}
- regulators->irq_ldo_lim = regmap_irq_get_virq(da9063->regmap_irq, irq);
- if (regulators->irq_ldo_lim >= 0) {
- ret = request_threaded_irq(regulators->irq_ldo_lim,
- NULL, da9063_ldo_lim_event,
- IRQF_TRIGGER_LOW | IRQF_ONESHOT,
- "LDO_LIM", regulators);
- if (ret) {
- dev_err(&pdev->dev,
- "Failed to request LDO_LIM IRQ.\n");
- regulators->irq_ldo_lim = -ENXIO;
- }
+ ret = request_threaded_irq(irq,
+ NULL, da9063_ldo_lim_event,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ "LDO_LIM", regulators);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Failed to request LDO_LIM IRQ.\n");
+ regulators->irq_ldo_lim = -ENXIO;
}
return 0;
config.dev = &i2c->dev;
config.init_data = pdata ? &pdata->da9210_constraints :
- of_get_regulator_init_data(dev, dev->of_node);
+ of_get_regulator_init_data(dev, dev->of_node, &da9210_reg);
config.driver_data = chip;
config.regmap = chip->regmap;
config.of_node = dev->of_node;
static struct regulator_ops dummy_ops;
-static struct regulator_desc dummy_desc = {
+static const struct regulator_desc dummy_desc = {
.name = "regulator-dummy",
.id = -1,
.type = REGULATOR_VOLTAGE,
};
static struct fan53555_platform_data *fan53555_parse_dt(struct device *dev,
- struct device_node *np)
+ struct device_node *np,
+ const struct regulator_desc *desc)
{
struct fan53555_platform_data *pdata;
int ret;
if (!pdata)
return NULL;
- pdata->regulator = of_get_regulator_init_data(dev, np);
+ pdata->regulator = of_get_regulator_init_data(dev, np, desc);
ret = of_property_read_u32(np, "fcs,suspend-voltage-selector",
&tmp);
unsigned int val;
int ret;
+ di = devm_kzalloc(&client->dev, sizeof(struct fan53555_device_info),
+ GFP_KERNEL);
+ if (!di)
+ return -ENOMEM;
+
pdata = dev_get_platdata(&client->dev);
if (!pdata)
- pdata = fan53555_parse_dt(&client->dev, np);
+ pdata = fan53555_parse_dt(&client->dev, np, &di->desc);
if (!pdata || !pdata->regulator) {
dev_err(&client->dev, "Platform data not found!\n");
return -ENODEV;
}
- di = devm_kzalloc(&client->dev, sizeof(struct fan53555_device_info),
- GFP_KERNEL);
- if (!di)
- return -ENOMEM;
-
di->regulator = pdata->regulator;
if (client->dev.of_node) {
const struct of_device_id *match;
/**
* of_get_fixed_voltage_config - extract fixed_voltage_config structure info
* @dev: device requesting for fixed_voltage_config
+ * @desc: regulator description
*
* Populates fixed_voltage_config structure by extracting data from device
* tree node, returns a pointer to the populated structure of NULL if memory
* alloc fails.
*/
static struct fixed_voltage_config *
-of_get_fixed_voltage_config(struct device *dev)
+of_get_fixed_voltage_config(struct device *dev,
+ const struct regulator_desc *desc)
{
struct fixed_voltage_config *config;
struct device_node *np = dev->of_node;
if (!config)
return ERR_PTR(-ENOMEM);
- config->init_data = of_get_regulator_init_data(dev, dev->of_node);
+ config->init_data = of_get_regulator_init_data(dev, dev->of_node, desc);
if (!config->init_data)
return ERR_PTR(-EINVAL);
struct regulator_config cfg = { };
int ret;
+ drvdata = devm_kzalloc(&pdev->dev, sizeof(struct fixed_voltage_data),
+ GFP_KERNEL);
+ if (!drvdata)
+ return -ENOMEM;
+
if (pdev->dev.of_node) {
- config = of_get_fixed_voltage_config(&pdev->dev);
+ config = of_get_fixed_voltage_config(&pdev->dev,
+ &drvdata->desc);
if (IS_ERR(config))
return PTR_ERR(config);
} else {
if (!config)
return -ENOMEM;
- drvdata = devm_kzalloc(&pdev->dev, sizeof(struct fixed_voltage_data),
- GFP_KERNEL);
- if (!drvdata)
- return -ENOMEM;
-
drvdata->desc.name = devm_kstrdup(&pdev->dev,
config->supply_name,
GFP_KERNEL);
drvdata->desc.fixed_uV = config->microvolts;
- if (config->gpio >= 0)
+ if (gpio_is_valid(config->gpio)) {
cfg.ena_gpio = config->gpio;
+ if (pdev->dev.of_node)
+ cfg.ena_gpio_initialized = true;
+ }
cfg.ena_gpio_invert = !config->enable_high;
if (config->enabled_at_boot) {
if (config->enable_high)
};
static struct gpio_regulator_config *
-of_get_gpio_regulator_config(struct device *dev, struct device_node *np)
+of_get_gpio_regulator_config(struct device *dev, struct device_node *np,
+ const struct regulator_desc *desc)
{
struct gpio_regulator_config *config;
const char *regtype;
if (!config)
return ERR_PTR(-ENOMEM);
- config->init_data = of_get_regulator_init_data(dev, np);
+ config->init_data = of_get_regulator_init_data(dev, np, desc);
if (!config->init_data)
return ERR_PTR(-EINVAL);
config->enable_gpio = of_get_named_gpio(np, "enable-gpio", 0);
- /* Fetch GPIOs. */
- config->nr_gpios = of_gpio_count(np);
-
- config->gpios = devm_kzalloc(dev,
- sizeof(struct gpio) * config->nr_gpios,
- GFP_KERNEL);
- if (!config->gpios)
- return ERR_PTR(-ENOMEM);
-
- proplen = of_property_count_u32_elems(np, "gpios-states");
- /* optional property */
- if (proplen < 0)
- proplen = 0;
-
- if (proplen > 0 && proplen != config->nr_gpios) {
- dev_warn(dev, "gpios <-> gpios-states mismatch\n");
- proplen = 0;
- }
+ /* Fetch GPIOs. - optional property*/
+ ret = of_gpio_count(np);
+ if ((ret < 0) && (ret != -ENOENT))
+ return ERR_PTR(ret);
+
+ if (ret > 0) {
+ config->nr_gpios = ret;
+ config->gpios = devm_kzalloc(dev,
+ sizeof(struct gpio) * config->nr_gpios,
+ GFP_KERNEL);
+ if (!config->gpios)
+ return ERR_PTR(-ENOMEM);
+
+ proplen = of_property_count_u32_elems(np, "gpios-states");
+ /* optional property */
+ if (proplen < 0)
+ proplen = 0;
+
+ if (proplen > 0 && proplen != config->nr_gpios) {
+ dev_warn(dev, "gpios <-> gpios-states mismatch\n");
+ proplen = 0;
+ }
- for (i = 0; i < config->nr_gpios; i++) {
- gpio = of_get_named_gpio(np, "gpios", i);
- if (gpio < 0)
- break;
- config->gpios[i].gpio = gpio;
- if (proplen > 0) {
- of_property_read_u32_index(np, "gpios-states", i, &ret);
- if (ret)
- config->gpios[i].flags = GPIOF_OUT_INIT_HIGH;
+ for (i = 0; i < config->nr_gpios; i++) {
+ gpio = of_get_named_gpio(np, "gpios", i);
+ if (gpio < 0)
+ break;
+ config->gpios[i].gpio = gpio;
+ if (proplen > 0) {
+ of_property_read_u32_index(np, "gpios-states",
+ i, &ret);
+ if (ret)
+ config->gpios[i].flags =
+ GPIOF_OUT_INIT_HIGH;
+ }
}
}
struct regulator_config cfg = { };
int ptr, ret, state;
- if (np) {
- config = of_get_gpio_regulator_config(&pdev->dev, np);
- if (IS_ERR(config))
- return PTR_ERR(config);
- }
-
drvdata = devm_kzalloc(&pdev->dev, sizeof(struct gpio_regulator_data),
GFP_KERNEL);
if (drvdata == NULL)
return -ENOMEM;
+ if (np) {
+ config = of_get_gpio_regulator_config(&pdev->dev, np,
+ &drvdata->desc);
+ if (IS_ERR(config))
+ return PTR_ERR(config);
+ }
+
drvdata->desc.name = kstrdup(config->supply_name, GFP_KERNEL);
if (drvdata->desc.name == NULL) {
dev_err(&pdev->dev, "Failed to allocate supply name\n");
goto err;
}
- drvdata->gpios = kmemdup(config->gpios,
- config->nr_gpios * sizeof(struct gpio),
- GFP_KERNEL);
- if (drvdata->gpios == NULL) {
- dev_err(&pdev->dev, "Failed to allocate gpio data\n");
- ret = -ENOMEM;
- goto err_name;
+ if (config->nr_gpios != 0) {
+ drvdata->gpios = kmemdup(config->gpios,
+ config->nr_gpios * sizeof(struct gpio),
+ GFP_KERNEL);
+ if (drvdata->gpios == NULL) {
+ dev_err(&pdev->dev, "Failed to allocate gpio data\n");
+ ret = -ENOMEM;
+ goto err_name;
+ }
+
+ drvdata->nr_gpios = config->nr_gpios;
+ ret = gpio_request_array(drvdata->gpios, drvdata->nr_gpios);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Could not obtain regulator setting GPIOs: %d\n", ret);
+ goto err_memstate;
+ }
}
drvdata->states = kmemdup(config->states,
goto err_memgpio;
}
- drvdata->nr_gpios = config->nr_gpios;
- ret = gpio_request_array(drvdata->gpios, drvdata->nr_gpios);
- if (ret) {
- dev_err(&pdev->dev,
- "Could not obtain regulator setting GPIOs: %d\n", ret);
- goto err_memstate;
- }
-
/* build initial state from gpio init data. */
state = 0;
for (ptr = 0; ptr < drvdata->nr_gpios; ptr++) {
cfg.driver_data = drvdata;
cfg.of_node = np;
- if (config->enable_gpio >= 0)
+ if (gpio_is_valid(config->enable_gpio)) {
cfg.ena_gpio = config->enable_gpio;
+ cfg.ena_gpio_initialized = true;
+ }
cfg.ena_gpio_invert = !config->enable_high;
if (config->enabled_at_boot) {
if (config->enable_high)
struct max1586_platform_data *pdata)
{
struct max1586_subdev_data *sub;
- struct of_regulator_match rmatch[ARRAY_SIZE(max1586_reg)];
+ struct of_regulator_match rmatch[ARRAY_SIZE(max1586_reg)] = { };
struct device_node *np = dev->of_node;
int i, matched;
#define MAX77686_DVS_MINUV 600000
#define MAX77686_DVS_UVSTEP 12500
+/*
+ * Values used for configuring LDOs and bucks.
+ * Forcing low power mode: LDO1, 3-5, 9, 13, 17-26
+ */
+#define MAX77686_LDO_LOWPOWER 0x1
+/*
+ * On/off controlled by PWRREQ:
+ * - LDO2, 6-8, 10-12, 14-16
+ * - buck[1234]
+ */
+#define MAX77686_OFF_PWRREQ 0x1
+/* Low power mode controlled by PWRREQ: All LDOs */
+#define MAX77686_LDO_LOWPOWER_PWRREQ 0x2
+/* Forcing low power mode: buck[234] */
+#define MAX77686_BUCK_LOWPOWER 0x2
+#define MAX77686_NORMAL 0x3
+
#define MAX77686_OPMODE_SHIFT 6
#define MAX77686_OPMODE_BUCK234_SHIFT 4
#define MAX77686_OPMODE_MASK 0x3
};
struct max77686_data {
+ /* Array indexed by regulator id */
unsigned int opmode[MAX77686_REGULATORS];
};
-/* Some BUCKS supports Normal[ON/OFF] mode during suspend */
-static int max77686_buck_set_suspend_disable(struct regulator_dev *rdev)
+static unsigned int max77686_get_opmode_shift(int id)
{
- unsigned int val;
+ switch (id) {
+ case MAX77686_BUCK1:
+ case MAX77686_BUCK5 ... MAX77686_BUCK9:
+ return 0;
+ case MAX77686_BUCK2 ... MAX77686_BUCK4:
+ return MAX77686_OPMODE_BUCK234_SHIFT;
+ default:
+ /* all LDOs */
+ return MAX77686_OPMODE_SHIFT;
+ }
+}
+
+/* Some BUCKs and LDOs supports Normal[ON/OFF] mode during suspend */
+static int max77686_set_suspend_disable(struct regulator_dev *rdev)
+{
+ unsigned int val, shift;
struct max77686_data *max77686 = rdev_get_drvdata(rdev);
int ret, id = rdev_get_id(rdev);
- if (id == MAX77686_BUCK1)
- val = 0x1;
- else
- val = 0x1 << MAX77686_OPMODE_BUCK234_SHIFT;
+ shift = max77686_get_opmode_shift(id);
+ val = MAX77686_OFF_PWRREQ;
ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
- rdev->desc->enable_mask, val);
+ rdev->desc->enable_mask, val << shift);
if (ret)
return ret;
switch (mode) {
case REGULATOR_MODE_IDLE: /* ON in LP Mode */
- val = 0x2 << MAX77686_OPMODE_SHIFT;
+ val = MAX77686_LDO_LOWPOWER_PWRREQ;
break;
case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */
- val = 0x3 << MAX77686_OPMODE_SHIFT;
+ val = MAX77686_NORMAL;
break;
default:
pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n",
}
ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
- rdev->desc->enable_mask, val);
+ rdev->desc->enable_mask,
+ val << MAX77686_OPMODE_SHIFT);
if (ret)
return ret;
switch (mode) {
case REGULATOR_MODE_STANDBY: /* switch off */
- val = 0x1 << MAX77686_OPMODE_SHIFT;
+ val = MAX77686_OFF_PWRREQ;
break;
case REGULATOR_MODE_IDLE: /* ON in LP Mode */
- val = 0x2 << MAX77686_OPMODE_SHIFT;
+ val = MAX77686_LDO_LOWPOWER_PWRREQ;
break;
case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */
- val = 0x3 << MAX77686_OPMODE_SHIFT;
+ val = MAX77686_NORMAL;
break;
default:
pr_warn("%s: regulator_suspend_mode : 0x%x not supported\n",
}
ret = regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
- rdev->desc->enable_mask, val);
+ rdev->desc->enable_mask,
+ val << MAX77686_OPMODE_SHIFT);
if (ret)
return ret;
static int max77686_enable(struct regulator_dev *rdev)
{
struct max77686_data *max77686 = rdev_get_drvdata(rdev);
+ unsigned int shift;
+ int id = rdev_get_id(rdev);
+
+ shift = max77686_get_opmode_shift(id);
+
+ if (max77686->opmode[id] == MAX77686_OFF_PWRREQ)
+ max77686->opmode[id] = MAX77686_NORMAL;
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask,
- max77686->opmode[rdev_get_id(rdev)]);
+ max77686->opmode[id] << shift);
}
static int max77686_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_suspend_mode = max77686_ldo_set_suspend_mode,
+ .set_suspend_disable = max77686_set_suspend_disable,
};
static struct regulator_ops max77686_buck1_ops = {
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
- .set_suspend_disable = max77686_buck_set_suspend_disable,
+ .set_suspend_disable = max77686_set_suspend_disable,
};
static struct regulator_ops max77686_buck_dvs_ops = {
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = max77686_set_ramp_delay,
- .set_suspend_disable = max77686_buck_set_suspend_disable,
+ .set_suspend_disable = max77686_set_suspend_disable,
};
#define regulator_desc_ldo(num) { \
.name = "LDO"#num, \
+ .of_match = of_match_ptr("LDO"#num), \
+ .regulators_node = of_match_ptr("voltage-regulators"), \
.id = MAX77686_LDO##num, \
.ops = &max77686_ops, \
.type = REGULATOR_VOLTAGE, \
}
#define regulator_desc_lpm_ldo(num) { \
.name = "LDO"#num, \
+ .of_match = of_match_ptr("LDO"#num), \
+ .regulators_node = of_match_ptr("voltage-regulators"), \
.id = MAX77686_LDO##num, \
.ops = &max77686_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
}
#define regulator_desc_ldo_low(num) { \
.name = "LDO"#num, \
+ .of_match = of_match_ptr("LDO"#num), \
+ .regulators_node = of_match_ptr("voltage-regulators"), \
.id = MAX77686_LDO##num, \
.ops = &max77686_ldo_ops, \
.type = REGULATOR_VOLTAGE, \
}
#define regulator_desc_ldo1_low(num) { \
.name = "LDO"#num, \
+ .of_match = of_match_ptr("LDO"#num), \
+ .regulators_node = of_match_ptr("voltage-regulators"), \
.id = MAX77686_LDO##num, \
.ops = &max77686_ops, \
.type = REGULATOR_VOLTAGE, \
}
#define regulator_desc_buck(num) { \
.name = "BUCK"#num, \
+ .of_match = of_match_ptr("BUCK"#num), \
+ .regulators_node = of_match_ptr("voltage-regulators"), \
.id = MAX77686_BUCK##num, \
.ops = &max77686_ops, \
.type = REGULATOR_VOLTAGE, \
}
#define regulator_desc_buck1(num) { \
.name = "BUCK"#num, \
+ .of_match = of_match_ptr("BUCK"#num), \
+ .regulators_node = of_match_ptr("voltage-regulators"), \
.id = MAX77686_BUCK##num, \
.ops = &max77686_buck1_ops, \
.type = REGULATOR_VOLTAGE, \
}
#define regulator_desc_buck_dvs(num) { \
.name = "BUCK"#num, \
+ .of_match = of_match_ptr("BUCK"#num), \
+ .regulators_node = of_match_ptr("voltage-regulators"), \
.id = MAX77686_BUCK##num, \
.ops = &max77686_buck_dvs_ops, \
.type = REGULATOR_VOLTAGE, \
<< MAX77686_OPMODE_BUCK234_SHIFT, \
}
-static struct regulator_desc regulators[] = {
+static const struct regulator_desc regulators[] = {
regulator_desc_ldo1_low(1),
regulator_desc_ldo_low(2),
regulator_desc_ldo(3),
regulator_desc_buck(9),
};
-#ifdef CONFIG_OF
-static int max77686_pmic_dt_parse_pdata(struct platform_device *pdev,
- struct max77686_platform_data *pdata)
-{
- struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
- struct device_node *pmic_np, *regulators_np;
- struct max77686_regulator_data *rdata;
- struct of_regulator_match rmatch;
- unsigned int i;
-
- pmic_np = iodev->dev->of_node;
- regulators_np = of_get_child_by_name(pmic_np, "voltage-regulators");
- if (!regulators_np) {
- dev_err(&pdev->dev, "could not find regulators sub-node\n");
- return -EINVAL;
- }
-
- pdata->num_regulators = ARRAY_SIZE(regulators);
- rdata = devm_kzalloc(&pdev->dev, sizeof(*rdata) *
- pdata->num_regulators, GFP_KERNEL);
- if (!rdata) {
- of_node_put(regulators_np);
- return -ENOMEM;
- }
-
- for (i = 0; i < pdata->num_regulators; i++) {
- rmatch.name = regulators[i].name;
- rmatch.init_data = NULL;
- rmatch.of_node = NULL;
- of_regulator_match(&pdev->dev, regulators_np, &rmatch, 1);
- rdata[i].initdata = rmatch.init_data;
- rdata[i].of_node = rmatch.of_node;
- }
-
- pdata->regulators = rdata;
- of_node_put(regulators_np);
-
- return 0;
-}
-#else
-static int max77686_pmic_dt_parse_pdata(struct platform_device *pdev,
- struct max77686_platform_data *pdata)
-{
- return 0;
-}
-#endif /* CONFIG_OF */
-
static int max77686_pmic_probe(struct platform_device *pdev)
{
struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
- struct max77686_platform_data *pdata = dev_get_platdata(iodev->dev);
struct max77686_data *max77686;
- int i, ret = 0;
+ int i;
struct regulator_config config = { };
dev_dbg(&pdev->dev, "%s\n", __func__);
- if (!pdata) {
- dev_err(&pdev->dev, "no platform data found for regulator\n");
- return -ENODEV;
- }
-
- if (iodev->dev->of_node) {
- ret = max77686_pmic_dt_parse_pdata(pdev, pdata);
- if (ret)
- return ret;
- }
-
- if (pdata->num_regulators != MAX77686_REGULATORS) {
- dev_err(&pdev->dev,
- "Invalid initial data for regulator's initialiation\n");
- return -EINVAL;
- }
-
max77686 = devm_kzalloc(&pdev->dev, sizeof(struct max77686_data),
GFP_KERNEL);
if (!max77686)
return -ENOMEM;
- config.dev = &pdev->dev;
+ config.dev = iodev->dev;
config.regmap = iodev->regmap;
config.driver_data = max77686;
platform_set_drvdata(pdev, max77686);
for (i = 0; i < MAX77686_REGULATORS; i++) {
struct regulator_dev *rdev;
+ int id = regulators[i].id;
- config.init_data = pdata->regulators[i].initdata;
- config.of_node = pdata->regulators[i].of_node;
-
- max77686->opmode[i] = regulators[i].enable_mask;
+ max77686->opmode[id] = MAX77686_NORMAL;
rdev = devm_regulator_register(&pdev->dev,
®ulators[i], &config);
if (IS_ERR(rdev)) {
+ int ret = PTR_ERR(rdev);
dev_err(&pdev->dev,
- "regulator init failed for %d\n", i);
- return PTR_ERR(rdev);
+ "regulator init failed for %d: %d\n", i, ret);
+ return ret;
}
}
.enable_mask = SAFEOUT_CTRL_ENSAFEOUT##_num##_MASK , \
}
-static struct regulator_desc regulators[] = {
+static const struct regulator_desc regulators[] = {
regulator_desc_esafeout(1),
regulator_desc_esafeout(2),
{
struct max77693_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct max77693_regulator_data *rdata = NULL;
int num_rdata, i;
- struct regulator_config config;
+ struct regulator_config config = { };
num_rdata = max77693_pmic_init_rdata(&pdev->dev, &rdata);
if (!rdata || num_rdata <= 0) {
#include <linux/regulator/of_regulator.h>
#include <linux/mfd/max77686.h>
#include <linux/mfd/max77686-private.h>
+#include <dt-bindings/regulator/maxim,max77802.h>
/* Default ramp delay in case it is not manually set */
#define MAX77802_RAMP_DELAY 100000 /* uV/us */
#define MAX77802_RAMP_RATE_MASK_4BIT 0xF0
#define MAX77802_RAMP_RATE_SHIFT_4BIT 4
+#define MAX77802_STATUS_OFF 0x0
+#define MAX77802_OFF_PWRREQ 0x1
+#define MAX77802_LP_PWRREQ 0x2
+
/* MAX77802 has two register formats: 2-bit and 4-bit */
static const unsigned int ramp_table_77802_2bit[] = {
12500,
};
struct max77802_regulator_prv {
+ /* Array indexed by regulator id */
unsigned int opmode[MAX77802_REG_MAX];
};
+static inline unsigned int max77802_map_mode(unsigned int mode)
+{
+ return mode == MAX77802_OPMODE_NORMAL ?
+ REGULATOR_MODE_NORMAL : REGULATOR_MODE_STANDBY;
+}
+
static int max77802_get_opmode_shift(int id)
{
if (id == MAX77802_BUCK1 || (id >= MAX77802_BUCK5 &&
return -EINVAL;
}
-/*
- * Some BUCKS supports Normal[ON/OFF] mode during suspend
+/**
+ * max77802_set_suspend_disable - Disable the regulator during system suspend
+ * @rdev: regulator to mark as disabled
*
- * BUCK 1, 6, 2-4, 5, 7-10 (all)
- *
- * The other mode (0x02) will make PWRREQ switch between normal
- * and low power.
+ * All regulators expect LDO 1, 3, 20 and 21 support OFF by PWRREQ.
+ * Configure the regulator so the PMIC will turn it OFF during system suspend.
*/
-static int max77802_buck_set_suspend_disable(struct regulator_dev *rdev)
+static int max77802_set_suspend_disable(struct regulator_dev *rdev)
{
- unsigned int val = MAX77802_OPMODE_STANDBY;
+ unsigned int val = MAX77802_OFF_PWRREQ;
struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
int id = rdev_get_id(rdev);
int shift = max77802_get_opmode_shift(id);
}
/*
- * Some LDOs supports LPM-ON/OFF/Normal-ON mode during suspend state
- * (Enable Control Logic1 by PWRREQ)
- *
- * LDOs 2, 4-19, 22-35.
+ * Some LDOs support Low Power Mode while the system is running.
*
+ * LDOs 1, 3, 20, 21.
*/
-static int max77802_ldo_set_suspend_mode_logic1(struct regulator_dev *rdev,
- unsigned int mode)
+static int max77802_set_mode(struct regulator_dev *rdev, unsigned int mode)
{
struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
int id = rdev_get_id(rdev);
int shift = max77802_get_opmode_shift(id);
switch (mode) {
- case REGULATOR_MODE_IDLE: /* ON in LP Mode */
- val = MAX77802_OPMODE_LP;
+ case REGULATOR_MODE_STANDBY:
+ val = MAX77802_OPMODE_LP; /* ON in Low Power Mode */
break;
- case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */
- val = MAX77802_OPMODE_NORMAL;
- break;
- case REGULATOR_MODE_STANDBY: /* ON/OFF by PWRREQ */
- val = MAX77802_OPMODE_STANDBY;
+ case REGULATOR_MODE_NORMAL:
+ val = MAX77802_OPMODE_NORMAL; /* ON in Normal Mode */
break;
default:
dev_warn(&rdev->dev, "%s: regulator mode: 0x%x not supported\n",
rdev->desc->enable_mask, val << shift);
}
-/*
- * Mode 1 (Output[ON/OFF] by PWRREQ) is not supported on some LDOs
- * (Enable Control Logic2 by PWRREQ)
+static unsigned max77802_get_mode(struct regulator_dev *rdev)
+{
+ struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
+ int id = rdev_get_id(rdev);
+
+ return max77802_map_mode(max77802->opmode[id]);
+}
+
+/**
+ * max77802_set_suspend_mode - set regulator opmode when the system is suspended
+ * @rdev: regulator to change mode
+ * @mode: operating mode to be set
*
- * LDOs 1, 20, 21, and 3,
+ * Will set the operating mode for the regulators during system suspend.
+ * This function is valid for the three different enable control logics:
*
+ * Enable Control Logic1 by PWRREQ (BUCK 2-4 and LDOs 2, 4-19, 22-35)
+ * Enable Control Logic2 by PWRREQ (LDOs 1, 20, 21)
+ * Enable Control Logic3 by PWRREQ (LDO 3)
+ *
+ * If setting the regulator mode fails, the function only warns but does
+ * not return an error code to avoid the regulator core to stop setting
+ * the operating mode for the remaining regulators.
*/
-static int max77802_ldo_set_suspend_mode_logic2(struct regulator_dev *rdev,
- unsigned int mode)
+static int max77802_set_suspend_mode(struct regulator_dev *rdev,
+ unsigned int mode)
{
struct max77802_regulator_prv *max77802 = rdev_get_drvdata(rdev);
int id = rdev_get_id(rdev);
unsigned int val;
int shift = max77802_get_opmode_shift(id);
+ /*
+ * If the regulator has been disabled for suspend
+ * then is invalid to try setting a suspend mode.
+ */
+ if (max77802->opmode[id] == MAX77802_OFF_PWRREQ) {
+ dev_warn(&rdev->dev, "%s: is disabled, mode: 0x%x not set\n",
+ rdev->desc->name, mode);
+ return 0;
+ }
+
switch (mode) {
- case REGULATOR_MODE_IDLE: /* ON in LP Mode */
- val = MAX77802_OPMODE_LP;
- break;
- case REGULATOR_MODE_NORMAL: /* ON in Normal Mode */
- val = MAX77802_OPMODE_NORMAL;
+ case REGULATOR_MODE_STANDBY:
+ /*
+ * If the regulator opmode is normal then enable
+ * ON in Low Power Mode by PWRREQ. If the mode is
+ * already Low Power then no action is required.
+ */
+ if (max77802->opmode[id] == MAX77802_OPMODE_NORMAL)
+ val = MAX77802_LP_PWRREQ;
+ else
+ return 0;
break;
+ case REGULATOR_MODE_NORMAL:
+ /*
+ * If the regulator operating mode is Low Power then
+ * normal is not a valid opmode in suspend. If the
+ * mode is already normal then no action is required.
+ */
+ if (max77802->opmode[id] == MAX77802_OPMODE_LP)
+ dev_warn(&rdev->dev, "%s: in Low Power: 0x%x invalid\n",
+ rdev->desc->name, mode);
+ return 0;
default:
dev_warn(&rdev->dev, "%s: regulator mode: 0x%x not supported\n",
rdev->desc->name, mode);
return -EINVAL;
}
- max77802->opmode[id] = val;
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask, val << shift);
}
int id = rdev_get_id(rdev);
int shift = max77802_get_opmode_shift(id);
+ if (max77802->opmode[id] == MAX77802_OFF_PWRREQ)
+ max77802->opmode[id] = MAX77802_OPMODE_NORMAL;
+
return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg,
rdev->desc->enable_mask,
max77802->opmode[id] << shift);
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
- .set_suspend_mode = max77802_ldo_set_suspend_mode_logic1,
+ .set_suspend_disable = max77802_set_suspend_disable,
+ .set_suspend_mode = max77802_set_suspend_mode,
};
/*
.get_voltage_sel = regulator_get_voltage_sel_regmap,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
- .set_suspend_mode = max77802_ldo_set_suspend_mode_logic2,
+ .set_mode = max77802_set_mode,
+ .get_mode = max77802_get_mode,
+ .set_suspend_mode = max77802_set_suspend_mode,
};
/* BUCKS 1, 6 */
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = max77802_set_ramp_delay_4bit,
- .set_suspend_disable = max77802_buck_set_suspend_disable,
+ .set_suspend_disable = max77802_set_suspend_disable,
};
-/* BUCKs 2-4, 5, 7-10 */
+/* BUCKs 2-4 */
+static struct regulator_ops max77802_buck_234_ops = {
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = max77802_enable,
+ .disable = regulator_disable_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .set_voltage_time_sel = regulator_set_voltage_time_sel,
+ .set_ramp_delay = max77802_set_ramp_delay_2bit,
+ .set_suspend_disable = max77802_set_suspend_disable,
+ .set_suspend_mode = max77802_set_suspend_mode,
+};
+
+/* BUCKs 5, 7-10 */
static struct regulator_ops max77802_buck_dvs_ops = {
.list_voltage = regulator_list_voltage_linear,
.map_voltage = regulator_map_voltage_linear,
.set_voltage_sel = regulator_set_voltage_sel_regmap,
.set_voltage_time_sel = regulator_set_voltage_time_sel,
.set_ramp_delay = max77802_set_ramp_delay_2bit,
- .set_suspend_disable = max77802_buck_set_suspend_disable,
+ .set_suspend_disable = max77802_set_suspend_disable,
};
/* LDOs 3-7, 9-14, 18-26, 28, 29, 32-34 */
#define regulator_77802_desc_p_ldo(num, supply, log) { \
.name = "LDO"#num, \
+ .of_match = of_match_ptr("LDO"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
.id = MAX77802_LDO##num, \
.supply_name = "inl"#supply, \
.ops = &max77802_ldo_ops_logic##log, \
.vsel_mask = MAX77802_VSEL_MASK, \
.enable_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \
.enable_mask = MAX77802_OPMODE_MASK << MAX77802_OPMODE_SHIFT_LDO, \
+ .of_map_mode = max77802_map_mode, \
}
/* LDOs 1, 2, 8, 15, 17, 27, 30, 35 */
#define regulator_77802_desc_n_ldo(num, supply, log) { \
.name = "LDO"#num, \
+ .of_match = of_match_ptr("LDO"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
.id = MAX77802_LDO##num, \
.supply_name = "inl"#supply, \
.ops = &max77802_ldo_ops_logic##log, \
.vsel_mask = MAX77802_VSEL_MASK, \
.enable_reg = MAX77802_REG_LDO1CTRL1 + num - 1, \
.enable_mask = MAX77802_OPMODE_MASK << MAX77802_OPMODE_SHIFT_LDO, \
+ .of_map_mode = max77802_map_mode, \
}
/* BUCKs 1, 6 */
#define regulator_77802_desc_16_buck(num) { \
.name = "BUCK"#num, \
+ .of_match = of_match_ptr("BUCK"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
.id = MAX77802_BUCK##num, \
.supply_name = "inb"#num, \
.ops = &max77802_buck_16_dvs_ops, \
.vsel_mask = MAX77802_DVS_VSEL_MASK, \
.enable_reg = MAX77802_REG_BUCK ## num ## CTRL, \
.enable_mask = MAX77802_OPMODE_MASK, \
+ .of_map_mode = max77802_map_mode, \
}
/* BUCKS 2-4 */
#define regulator_77802_desc_234_buck(num) { \
.name = "BUCK"#num, \
+ .of_match = of_match_ptr("BUCK"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
.id = MAX77802_BUCK##num, \
.supply_name = "inb"#num, \
- .ops = &max77802_buck_dvs_ops, \
+ .ops = &max77802_buck_234_ops, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
.min_uV = 600000, \
.enable_reg = MAX77802_REG_BUCK ## num ## CTRL1, \
.enable_mask = MAX77802_OPMODE_MASK << \
MAX77802_OPMODE_BUCK234_SHIFT, \
+ .of_map_mode = max77802_map_mode, \
}
/* BUCK 5 */
#define regulator_77802_desc_buck5(num) { \
.name = "BUCK"#num, \
+ .of_match = of_match_ptr("BUCK"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
.id = MAX77802_BUCK##num, \
.supply_name = "inb"#num, \
.ops = &max77802_buck_dvs_ops, \
.vsel_mask = MAX77802_VSEL_MASK, \
.enable_reg = MAX77802_REG_BUCK5CTRL, \
.enable_mask = MAX77802_OPMODE_MASK, \
+ .of_map_mode = max77802_map_mode, \
}
/* BUCKs 7-10 */
#define regulator_77802_desc_buck7_10(num) { \
.name = "BUCK"#num, \
+ .of_match = of_match_ptr("BUCK"#num), \
+ .regulators_node = of_match_ptr("regulators"), \
.id = MAX77802_BUCK##num, \
.supply_name = "inb"#num, \
.ops = &max77802_buck_dvs_ops, \
.vsel_mask = MAX77802_VSEL_MASK, \
.enable_reg = MAX77802_REG_BUCK7CTRL + (num - 7) * 3, \
.enable_mask = MAX77802_OPMODE_MASK, \
+ .of_map_mode = max77802_map_mode, \
}
-static struct regulator_desc regulators[] = {
+static const struct regulator_desc regulators[] = {
regulator_77802_desc_16_buck(1),
regulator_77802_desc_234_buck(2),
regulator_77802_desc_234_buck(3),
regulator_77802_desc_n_ldo(35, 2, 1),
};
-#ifdef CONFIG_OF
-static int max77802_pmic_dt_parse_pdata(struct platform_device *pdev,
- struct max77686_platform_data *pdata)
-{
- struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
- struct device_node *pmic_np, *regulators_np;
- struct max77686_regulator_data *rdata;
- struct of_regulator_match rmatch;
- unsigned int i;
-
- pmic_np = iodev->dev->of_node;
- regulators_np = of_get_child_by_name(pmic_np, "regulators");
- if (!regulators_np) {
- dev_err(&pdev->dev, "could not find regulators sub-node\n");
- return -EINVAL;
- }
-
- pdata->num_regulators = ARRAY_SIZE(regulators);
- rdata = devm_kzalloc(&pdev->dev, sizeof(*rdata) *
- pdata->num_regulators, GFP_KERNEL);
- if (!rdata) {
- of_node_put(regulators_np);
- return -ENOMEM;
- }
-
- for (i = 0; i < pdata->num_regulators; i++) {
- rmatch.name = regulators[i].name;
- rmatch.init_data = NULL;
- rmatch.of_node = NULL;
- if (of_regulator_match(&pdev->dev, regulators_np, &rmatch,
- 1) != 1) {
- dev_warn(&pdev->dev, "No matching regulator for '%s'\n",
- rmatch.name);
- continue;
- }
- rdata[i].initdata = rmatch.init_data;
- rdata[i].of_node = rmatch.of_node;
- rdata[i].id = regulators[i].id;
- }
-
- pdata->regulators = rdata;
- of_node_put(regulators_np);
-
- return 0;
-}
-#else
-static int max77802_pmic_dt_parse_pdata(struct platform_device *pdev,
- struct max77686_platform_data *pdata)
-{
- return 0;
-}
-#endif /* CONFIG_OF */
-
static int max77802_pmic_probe(struct platform_device *pdev)
{
struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent);
- struct max77686_platform_data *pdata = dev_get_platdata(iodev->dev);
struct max77802_regulator_prv *max77802;
- int i, ret = 0, val;
+ int i, val;
struct regulator_config config = { };
- /* This is allocated by the MFD driver */
- if (!pdata) {
- dev_err(&pdev->dev, "no platform data found for regulator\n");
- return -ENODEV;
- }
-
max77802 = devm_kzalloc(&pdev->dev,
sizeof(struct max77802_regulator_prv),
GFP_KERNEL);
if (!max77802)
return -ENOMEM;
- if (iodev->dev->of_node) {
- ret = max77802_pmic_dt_parse_pdata(pdev, pdata);
- if (ret)
- return ret;
- }
-
config.dev = iodev->dev;
config.regmap = iodev->regmap;
config.driver_data = max77802;
for (i = 0; i < MAX77802_REG_MAX; i++) {
struct regulator_dev *rdev;
- int id = pdata->regulators[i].id;
+ int id = regulators[i].id;
int shift = max77802_get_opmode_shift(id);
-
- config.init_data = pdata->regulators[i].initdata;
- config.of_node = pdata->regulators[i].of_node;
+ int ret;
ret = regmap_read(iodev->regmap, regulators[i].enable_reg, &val);
- val = val >> shift & MAX77802_OPMODE_MASK;
+ if (ret < 0) {
+ dev_warn(&pdev->dev,
+ "cannot read current mode for %d\n", i);
+ val = MAX77802_OPMODE_NORMAL;
+ } else {
+ val = val >> shift & MAX77802_OPMODE_MASK;
+ }
/*
* If the regulator is disabled and the system warm rebooted,
* the hardware reports OFF as the regulator operating mode.
* Default to operating mode NORMAL in that case.
*/
- if (val == MAX77802_OPMODE_OFF)
+ if (val == MAX77802_STATUS_OFF)
max77802->opmode[id] = MAX77802_OPMODE_NORMAL;
else
max77802->opmode[id] = val;
rdev = devm_regulator_register(&pdev->dev,
®ulators[i], &config);
if (IS_ERR(rdev)) {
+ ret = PTR_ERR(rdev);
dev_err(&pdev->dev,
- "regulator init failed for %d\n", i);
- return PTR_ERR(rdev);
+ "regulator init failed for %d: %d\n", i, ret);
+ return ret;
}
}
int matched, i;
struct device_node *np;
struct max8660_subdev_data *sub;
- struct of_regulator_match rmatch[ARRAY_SIZE(max8660_reg)];
+ struct of_regulator_match rmatch[ARRAY_SIZE(max8660_reg)] = { };
np = of_get_child_by_name(dev->of_node, "regulators");
if (!np) {
if (of_property_read_u32(np, "max8952,ramp-speed", &pd->ramp_speed))
dev_warn(dev, "max8952,ramp-speed property not specified, defaulting to 32mV/us\n");
- pd->reg_data = of_get_regulator_init_data(dev, np);
+ pd->reg_data = of_get_regulator_init_data(dev, np, ®ulator);
if (!pd->reg_data) {
dev_err(dev, "Failed to parse regulator init data\n");
return NULL;
config.of_node = client->dev.of_node;
config.ena_gpio = pdata->gpio_en;
+ if (client->dev.of_node)
+ config.ena_gpio_initialized = true;
if (pdata->reg_data->constraints.boot_on)
config.ena_gpio_flags |= GPIOF_OUT_INIT_HIGH;
config.dev = &client->dev;
config.init_data = pdata ? pdata->reg_init_data :
- of_get_regulator_init_data(&client->dev, client->dev.of_node);
+ of_get_regulator_init_data(&client->dev, client->dev.of_node,
+ &max->desc);
config.driver_data = max;
config.of_node = client->dev.of_node;
config.regmap = max->regmap;
rdata->id = i;
rdata->initdata = of_get_regulator_init_data(&pdev->dev,
- reg_np);
+ reg_np,
+ ®ulators[i]);
rdata->reg_node = reg_np;
rdata++;
}
continue;
rdata->id = regulators[i].id;
- rdata->initdata = of_get_regulator_init_data(
- iodev->dev, reg_np);
+ rdata->initdata = of_get_regulator_init_data(iodev->dev,
+ reg_np,
+ ®ulators[i]);
rdata->reg_node = reg_np;
++rdata;
}
regulators[i].desc.name)) {
p->id = i;
p->init_data = of_get_regulator_init_data(
- &pdev->dev, child);
+ &pdev->dev, child,
+ ®ulators[i].desc);
p->node = child;
p++;
#include "internal.h"
+static const char *const regulator_states[PM_SUSPEND_MAX + 1] = {
+ [PM_SUSPEND_MEM] = "regulator-state-mem",
+ [PM_SUSPEND_MAX] = "regulator-state-disk",
+};
+
static void of_get_regulation_constraints(struct device_node *np,
- struct regulator_init_data **init_data)
+ struct regulator_init_data **init_data,
+ const struct regulator_desc *desc)
{
const __be32 *min_uV, *max_uV;
struct regulation_constraints *constraints = &(*init_data)->constraints;
- int ret;
+ struct regulator_state *suspend_state;
+ struct device_node *suspend_np;
+ int ret, i;
u32 pval;
constraints->name = of_get_property(np, "regulator-name", NULL);
ret = of_property_read_u32(np, "regulator-enable-ramp-delay", &pval);
if (!ret)
constraints->enable_time = pval;
+
+ if (!of_property_read_u32(np, "regulator-initial-mode", &pval)) {
+ if (desc && desc->of_map_mode) {
+ ret = desc->of_map_mode(pval);
+ if (ret == -EINVAL)
+ pr_err("%s: invalid mode %u\n", np->name, pval);
+ else
+ constraints->initial_mode = ret;
+ } else {
+ pr_warn("%s: mapping for mode %d not defined\n",
+ np->name, pval);
+ }
+ }
+
+ for (i = 0; i < ARRAY_SIZE(regulator_states); i++) {
+ switch (i) {
+ case PM_SUSPEND_MEM:
+ suspend_state = &constraints->state_mem;
+ break;
+ case PM_SUSPEND_MAX:
+ suspend_state = &constraints->state_disk;
+ break;
+ case PM_SUSPEND_ON:
+ case PM_SUSPEND_FREEZE:
+ case PM_SUSPEND_STANDBY:
+ default:
+ continue;
+ };
+
+ suspend_np = of_get_child_by_name(np, regulator_states[i]);
+ if (!suspend_np || !suspend_state)
+ continue;
+
+ if (!of_property_read_u32(suspend_np, "regulator-mode",
+ &pval)) {
+ if (desc && desc->of_map_mode) {
+ ret = desc->of_map_mode(pval);
+ if (ret == -EINVAL)
+ pr_err("%s: invalid mode %u\n",
+ np->name, pval);
+ else
+ suspend_state->mode = ret;
+ } else {
+ pr_warn("%s: mapping for mode %d not defined\n",
+ np->name, pval);
+ }
+ }
+
+ if (of_property_read_bool(suspend_np,
+ "regulator-on-in-suspend"))
+ suspend_state->enabled = true;
+ else if (of_property_read_bool(suspend_np,
+ "regulator-off-in-suspend"))
+ suspend_state->disabled = true;
+
+ if (!of_property_read_u32(suspend_np,
+ "regulator-suspend-microvolt", &pval))
+ suspend_state->uV = pval;
+
+ of_node_put(suspend_np);
+ suspend_state = NULL;
+ suspend_np = NULL;
+ }
}
/**
* of_get_regulator_init_data - extract regulator_init_data structure info
* @dev: device requesting for regulator_init_data
+ * @node: regulator device node
+ * @desc: regulator description
*
* Populates regulator_init_data structure by extracting data from device
* tree node, returns a pointer to the populated struture or NULL if memory
* alloc fails.
*/
struct regulator_init_data *of_get_regulator_init_data(struct device *dev,
- struct device_node *node)
+ struct device_node *node,
+ const struct regulator_desc *desc)
{
struct regulator_init_data *init_data;
if (!init_data)
return NULL; /* Out of memory? */
- of_get_regulation_constraints(node, &init_data);
+ of_get_regulation_constraints(node, &init_data, desc);
return init_data;
}
EXPORT_SYMBOL_GPL(of_get_regulator_init_data);
continue;
match->init_data =
- of_get_regulator_init_data(dev, child);
+ of_get_regulator_init_data(dev, child,
+ match->desc);
if (!match->init_data) {
dev_err(dev,
"failed to parse DT for regulator %s\n",
search = dev->of_node;
if (!search) {
- dev_err(dev, "Failed to find regulator container node\n");
+ dev_dbg(dev, "Failed to find regulator container node '%s'\n",
+ desc->regulators_node);
return NULL;
}
if (strcmp(desc->of_match, name))
continue;
- init_data = of_get_regulator_init_data(dev, child);
+ init_data = of_get_regulator_init_data(dev, child, desc);
if (!init_data) {
dev_err(dev,
"failed to parse DT for regulator %s\n",
return ret;
}
- config.init_data = of_get_regulator_init_data(&pdev->dev, np);
+ config.init_data = of_get_regulator_init_data(&pdev->dev, np,
+ &drvdata->desc);
if (!config.init_data)
return -ENOMEM;
REGULATOR_LINEAR_RANGE(1500000, 64, 100, 50000),
};
+static const struct regulator_linear_range smb208_ranges[] = {
+ REGULATOR_LINEAR_RANGE( 375000, 0, 29, 12500),
+ REGULATOR_LINEAR_RANGE( 750000, 30, 89, 12500),
+ REGULATOR_LINEAR_RANGE(1500000, 90, 153, 25000),
+ REGULATOR_LINEAR_RANGE(3100000, 154, 234, 25000),
+};
+
static const struct regulator_linear_range ncp_ranges[] = {
REGULATOR_LINEAR_RANGE(1500000, 0, 31, 50000),
};
.parts = &rpm8960_switch_parts,
};
+static const struct qcom_rpm_reg smb208_smps = {
+ .desc.linear_ranges = smb208_ranges,
+ .desc.n_linear_ranges = ARRAY_SIZE(smb208_ranges),
+ .desc.n_voltages = 235,
+ .desc.ops = &uV_ops,
+ .parts = &rpm8960_smps_parts,
+ .supports_force_mode_auto = false,
+ .supports_force_mode_bypass = false,
+};
+
static const struct of_device_id rpm_of_match[] = {
{ .compatible = "qcom,rpm-pm8058-pldo", .data = &pm8058_pldo },
{ .compatible = "qcom,rpm-pm8058-nldo", .data = &pm8058_nldo },
{ .compatible = "qcom,rpm-pm8921-ftsmps", .data = &pm8921_ftsmps },
{ .compatible = "qcom,rpm-pm8921-ncp", .data = &pm8921_ncp },
{ .compatible = "qcom,rpm-pm8921-switch", .data = &pm8921_switch },
+
+ { .compatible = "qcom,rpm-smb208", .data = &smb208_smps },
{ }
};
MODULE_DEVICE_TABLE(of, rpm_of_match);
match = of_match_device(rpm_of_match, &pdev->dev);
template = match->data;
- initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node);
- if (!initdata)
- return -EINVAL;
-
vreg = devm_kmalloc(&pdev->dev, sizeof(*vreg), GFP_KERNEL);
if (!vreg) {
dev_err(&pdev->dev, "failed to allocate vreg\n");
return -ENODEV;
}
+ initdata = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node,
+ &vreg->desc);
+ if (!initdata)
+ return -EINVAL;
+
key = "reg";
ret = of_property_read_u32(pdev->dev.of_node, key, &val);
if (ret) {
#define RK808_RAMP_RATE_6MV_PER_US (2 << RK808_RAMP_RATE_OFFSET)
#define RK808_RAMP_RATE_10MV_PER_US (3 << RK808_RAMP_RATE_OFFSET)
+/* Offset from XXX_ON_VSEL to XXX_SLP_VSEL */
+#define RK808_SLP_REG_OFFSET 1
+
+/* Offset from XXX_EN_REG to SLEEP_SET_OFF_XXX */
+#define RK808_SLP_SET_OFF_REG_OFFSET 2
+
static const int rk808_buck_config_regs[] = {
RK808_BUCK1_CONFIG_REG,
RK808_BUCK2_CONFIG_REG,
};
static const struct regulator_linear_range rk808_buck_voltage_ranges[] = {
- REGULATOR_LINEAR_RANGE(700000, 0, 63, 12500),
+ REGULATOR_LINEAR_RANGE(712500, 0, 63, 12500),
};
static const struct regulator_linear_range rk808_buck4_voltage_ranges[] = {
RK808_RAMP_RATE_MASK, ramp_value);
}
+int rk808_set_suspend_voltage(struct regulator_dev *rdev, int uv)
+{
+ unsigned int reg;
+ int sel = regulator_map_voltage_linear_range(rdev, uv, uv);
+
+ if (sel < 0)
+ return -EINVAL;
+
+ reg = rdev->desc->vsel_reg + RK808_SLP_REG_OFFSET;
+
+ return regmap_update_bits(rdev->regmap, reg,
+ rdev->desc->vsel_mask,
+ sel);
+}
+
+int rk808_set_suspend_enable(struct regulator_dev *rdev)
+{
+ unsigned int reg;
+
+ reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
+
+ return regmap_update_bits(rdev->regmap, reg,
+ rdev->desc->enable_mask,
+ 0);
+}
+
+int rk808_set_suspend_disable(struct regulator_dev *rdev)
+{
+ unsigned int reg;
+
+ reg = rdev->desc->enable_reg + RK808_SLP_SET_OFF_REG_OFFSET;
+
+ return regmap_update_bits(rdev->regmap, reg,
+ rdev->desc->enable_mask,
+ rdev->desc->enable_mask);
+}
+
static struct regulator_ops rk808_buck1_2_ops = {
.list_voltage = regulator_list_voltage_linear_range,
.map_voltage = regulator_map_voltage_linear_range,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
.set_ramp_delay = rk808_set_ramp_delay,
+ .set_suspend_voltage = rk808_set_suspend_voltage,
+ .set_suspend_enable = rk808_set_suspend_enable,
+ .set_suspend_disable = rk808_set_suspend_disable,
};
static struct regulator_ops rk808_reg_ops = {
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
.is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_voltage = rk808_set_suspend_voltage,
+ .set_suspend_enable = rk808_set_suspend_enable,
+ .set_suspend_disable = rk808_set_suspend_disable,
};
static struct regulator_ops rk808_switch_ops = {
- .enable = regulator_enable_regmap,
- .disable = regulator_disable_regmap,
- .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_suspend_enable = rk808_set_suspend_enable,
+ .set_suspend_disable = rk808_set_suspend_disable,
};
static const struct regulator_desc rk808_reg[] = {
#define REG(rid, ereg, emask, vreg, vmask, min, max, step) \
[RN5T618_##rid] = { \
.name = #rid, \
+ .of_match = of_match_ptr(#rid), \
+ .regulators_node = of_match_ptr("regulators"), \
.id = RN5T618_##rid, \
.type = REGULATOR_VOLTAGE, \
.owner = THIS_MODULE, \
REG(LDORTC2, LDOEN2, BIT(5), LDORTC2DAC, 0x7f, 900000, 3500000, 25000),
};
-static struct of_regulator_match rn5t618_matches[] = {
- [RN5T618_DCDC1] = { .name = "DCDC1" },
- [RN5T618_DCDC2] = { .name = "DCDC2" },
- [RN5T618_DCDC3] = { .name = "DCDC3" },
- [RN5T618_LDO1] = { .name = "LDO1" },
- [RN5T618_LDO2] = { .name = "LDO2" },
- [RN5T618_LDO3] = { .name = "LDO3" },
- [RN5T618_LDO4] = { .name = "LDO4" },
- [RN5T618_LDO5] = { .name = "LDO5" },
- [RN5T618_LDORTC1] = { .name = "LDORTC1" },
- [RN5T618_LDORTC2] = { .name = "LDORTC2" },
-};
-
-static int rn5t618_regulator_parse_dt(struct platform_device *pdev)
-{
- struct device_node *np, *regulators;
- int ret;
-
- np = of_node_get(pdev->dev.parent->of_node);
- if (!np)
- return 0;
-
- regulators = of_get_child_by_name(np, "regulators");
- if (!regulators) {
- dev_err(&pdev->dev, "regulators node not found\n");
- return -EINVAL;
- }
-
- ret = of_regulator_match(&pdev->dev, regulators, rn5t618_matches,
- ARRAY_SIZE(rn5t618_matches));
- of_node_put(regulators);
- if (ret < 0) {
- dev_err(&pdev->dev, "error parsing regulator init data: %d\n",
- ret);
- }
-
- return 0;
-}
-
static int rn5t618_regulator_probe(struct platform_device *pdev)
{
struct rn5t618 *rn5t618 = dev_get_drvdata(pdev->dev.parent);
struct regulator_config config = { };
struct regulator_dev *rdev;
- int ret, i;
-
- ret = rn5t618_regulator_parse_dt(pdev);
- if (ret)
- return ret;
+ int i;
for (i = 0; i < RN5T618_REG_NUM; i++) {
- config.dev = &pdev->dev;
- config.init_data = rn5t618_matches[i].init_data;
- config.of_node = rn5t618_matches[i].of_node;
+ config.dev = pdev->dev.parent;
config.regmap = rn5t618->regmap;
rdev = devm_regulator_register(&pdev->dev,
--- /dev/null
+/*
+ * Regulator driver for the Richtek RT5033
+ *
+ * Copyright (C) 2014 Samsung Electronics, Co., Ltd.
+ * Author: Beomho Seo <beomho.seo@samsung.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published bythe Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/mfd/rt5033.h>
+#include <linux/mfd/rt5033-private.h>
+#include <linux/regulator/of_regulator.h>
+
+static struct regulator_ops rt5033_safe_ldo_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+};
+
+static struct regulator_ops rt5033_buck_ops = {
+ .is_enabled = regulator_is_enabled_regmap,
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .map_voltage = regulator_map_voltage_linear,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+};
+
+static const struct regulator_desc rt5033_supported_regulators[] = {
+ [RT5033_BUCK] = {
+ .name = "BUCK",
+ .id = RT5033_BUCK,
+ .ops = &rt5033_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .n_voltages = RT5033_REGULATOR_BUCK_VOLTAGE_STEP_NUM,
+ .min_uV = RT5033_REGULATOR_BUCK_VOLTAGE_MIN,
+ .uV_step = RT5033_REGULATOR_BUCK_VOLTAGE_STEP,
+ .enable_reg = RT5033_REG_CTRL,
+ .enable_mask = RT5033_CTRL_EN_BUCK_MASK,
+ .vsel_reg = RT5033_REG_BUCK_CTRL,
+ .vsel_mask = RT5033_BUCK_CTRL_MASK,
+ },
+ [RT5033_LDO] = {
+ .name = "LDO",
+ .id = RT5033_LDO,
+ .ops = &rt5033_buck_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .n_voltages = RT5033_REGULATOR_LDO_VOLTAGE_STEP_NUM,
+ .min_uV = RT5033_REGULATOR_LDO_VOLTAGE_MIN,
+ .uV_step = RT5033_REGULATOR_LDO_VOLTAGE_STEP,
+ .enable_reg = RT5033_REG_CTRL,
+ .enable_mask = RT5033_CTRL_EN_LDO_MASK,
+ .vsel_reg = RT5033_REG_LDO_CTRL,
+ .vsel_mask = RT5033_LDO_CTRL_MASK,
+ },
+ [RT5033_SAFE_LDO] = {
+ .name = "SAFE_LDO",
+ .id = RT5033_SAFE_LDO,
+ .ops = &rt5033_safe_ldo_ops,
+ .type = REGULATOR_VOLTAGE,
+ .owner = THIS_MODULE,
+ .n_voltages = 1,
+ .min_uV = RT5033_REGULATOR_SAFE_LDO_VOLTAGE,
+ .enable_reg = RT5033_REG_CTRL,
+ .enable_mask = RT5033_CTRL_EN_SAFE_LDO_MASK,
+ },
+};
+
+static int rt5033_regulator_probe(struct platform_device *pdev)
+{
+ struct rt5033_dev *rt5033 = dev_get_drvdata(pdev->dev.parent);
+ int ret, i;
+ struct regulator_config config = {};
+
+ config.dev = &pdev->dev;
+ config.driver_data = rt5033;
+
+ for (i = 0; i < ARRAY_SIZE(rt5033_supported_regulators); i++) {
+ struct regulator_dev *regulator;
+
+ config.regmap = rt5033->regmap;
+
+ regulator = devm_regulator_register(&pdev->dev,
+ &rt5033_supported_regulators[i], &config);
+ if (IS_ERR(regulator)) {
+ ret = PTR_ERR(regulator);
+ dev_err(&pdev->dev,
+ "Regulator init failed %d: with error: %d\n",
+ i, ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static const struct platform_device_id rt5033_regulator_id[] = {
+ { "rt5033-regulator", },
+ { }
+};
+MODULE_DEVICE_TABLE(platform, rt5033_regulator_id);
+
+static struct platform_driver rt5033_regulator_driver = {
+ .driver = {
+ .name = "rt5033-regulator",
+ },
+ .probe = rt5033_regulator_probe,
+ .id_table = rt5033_regulator_id,
+};
+module_platform_driver(rt5033_regulator_driver);
+
+MODULE_DESCRIPTION("Richtek RT5033 Regulator driver");
+MODULE_AUTHOR("Beomho Seo <beomho.seo@samsung.com>");
+MODULE_LICENSE("GPL");
.enable_mask = S2MPA01_ENABLE_MASK \
}
-static struct regulator_desc regulators[] = {
+static const struct regulator_desc regulators[] = {
regulator_desc_ldo(1, STEP_25_MV),
regulator_desc_ldo(2, STEP_50_MV),
regulator_desc_ldo(3, STEP_50_MV),
{
struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent);
struct sec_platform_data *pdata = dev_get_platdata(iodev->dev);
- struct of_regulator_match rdata[S2MPA01_REGULATOR_MAX];
+ struct of_regulator_match rdata[S2MPA01_REGULATOR_MAX] = { };
struct device_node *reg_np = NULL;
struct regulator_config config = { };
struct s2mpa01_info *s2mpa01;
#include <linux/of_gpio.h>
#include <linux/mfd/samsung/core.h>
#include <linux/mfd/samsung/s2mps11.h>
+#include <linux/mfd/samsung/s2mps13.h>
#include <linux/mfd/samsung/s2mps14.h>
#include <linux/mfd/samsung/s2mpu02.h>
enum sec_device_type dev_type;
/*
- * One bit for each S2MPS14/S2MPU02 regulator whether the suspend mode
- * was enabled.
+ * One bit for each S2MPS13/S2MPS14/S2MPU02 regulator whether
+ * the suspend mode was enabled.
*/
- unsigned long long s2mps14_suspend_state:35;
+ unsigned long long s2mps14_suspend_state:50;
/* Array of size rdev_num with GPIO-s for external sleep control */
int *ext_control_gpio;
regulator_desc_s2mps11_buck6_10(10, MIN_750_MV, STEP_12_5_MV),
};
+static struct regulator_ops s2mps14_reg_ops;
+
+#define regulator_desc_s2mps13_ldo(num, min, step, min_sel) { \
+ .name = "LDO"#num, \
+ .id = S2MPS13_LDO##num, \
+ .ops = &s2mps14_reg_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = min, \
+ .uV_step = step, \
+ .linear_min_sel = min_sel, \
+ .n_voltages = S2MPS14_LDO_N_VOLTAGES, \
+ .vsel_reg = S2MPS13_REG_L1CTRL + num - 1, \
+ .vsel_mask = S2MPS14_LDO_VSEL_MASK, \
+ .enable_reg = S2MPS13_REG_L1CTRL + num - 1, \
+ .enable_mask = S2MPS14_ENABLE_MASK \
+}
+
+#define regulator_desc_s2mps13_buck(num, min, step, min_sel) { \
+ .name = "BUCK"#num, \
+ .id = S2MPS13_BUCK##num, \
+ .ops = &s2mps14_reg_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .owner = THIS_MODULE, \
+ .min_uV = min, \
+ .uV_step = step, \
+ .linear_min_sel = min_sel, \
+ .n_voltages = S2MPS14_BUCK_N_VOLTAGES, \
+ .ramp_delay = S2MPS13_BUCK_RAMP_DELAY, \
+ .vsel_reg = S2MPS13_REG_B1OUT + (num - 1) * 2, \
+ .vsel_mask = S2MPS14_BUCK_VSEL_MASK, \
+ .enable_reg = S2MPS13_REG_B1CTRL + (num - 1) * 2, \
+ .enable_mask = S2MPS14_ENABLE_MASK \
+}
+
+static const struct regulator_desc s2mps13_regulators[] = {
+ regulator_desc_s2mps13_ldo(1, MIN_800_MV, STEP_12_5_MV, 0x00),
+ regulator_desc_s2mps13_ldo(2, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(3, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(4, MIN_800_MV, STEP_12_5_MV, 0x00),
+ regulator_desc_s2mps13_ldo(5, MIN_800_MV, STEP_12_5_MV, 0x00),
+ regulator_desc_s2mps13_ldo(6, MIN_800_MV, STEP_12_5_MV, 0x00),
+ regulator_desc_s2mps13_ldo(7, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(8, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(9, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(10, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(11, MIN_800_MV, STEP_25_MV, 0x10),
+ regulator_desc_s2mps13_ldo(12, MIN_800_MV, STEP_25_MV, 0x10),
+ regulator_desc_s2mps13_ldo(13, MIN_800_MV, STEP_25_MV, 0x10),
+ regulator_desc_s2mps13_ldo(14, MIN_800_MV, STEP_12_5_MV, 0x00),
+ regulator_desc_s2mps13_ldo(15, MIN_800_MV, STEP_12_5_MV, 0x00),
+ regulator_desc_s2mps13_ldo(16, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(17, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(18, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(19, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(20, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(21, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(22, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(23, MIN_800_MV, STEP_12_5_MV, 0x00),
+ regulator_desc_s2mps13_ldo(24, MIN_800_MV, STEP_12_5_MV, 0x00),
+ regulator_desc_s2mps13_ldo(25, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(26, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(27, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(28, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(29, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(30, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(31, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(32, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(33, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(34, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(35, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(36, MIN_800_MV, STEP_12_5_MV, 0x00),
+ regulator_desc_s2mps13_ldo(37, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(38, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_ldo(39, MIN_1000_MV, STEP_25_MV, 0x08),
+ regulator_desc_s2mps13_ldo(40, MIN_1400_MV, STEP_50_MV, 0x0C),
+ regulator_desc_s2mps13_buck(1, MIN_500_MV, STEP_6_25_MV, 0x10),
+ regulator_desc_s2mps13_buck(2, MIN_500_MV, STEP_6_25_MV, 0x10),
+ regulator_desc_s2mps13_buck(3, MIN_500_MV, STEP_6_25_MV, 0x10),
+ regulator_desc_s2mps13_buck(4, MIN_500_MV, STEP_6_25_MV, 0x10),
+ regulator_desc_s2mps13_buck(5, MIN_500_MV, STEP_6_25_MV, 0x10),
+ regulator_desc_s2mps13_buck(6, MIN_500_MV, STEP_6_25_MV, 0x10),
+ regulator_desc_s2mps13_buck(7, MIN_500_MV, STEP_6_25_MV, 0x10),
+ regulator_desc_s2mps13_buck(8, MIN_1000_MV, STEP_12_5_MV, 0x20),
+ regulator_desc_s2mps13_buck(9, MIN_1000_MV, STEP_12_5_MV, 0x20),
+ regulator_desc_s2mps13_buck(10, MIN_500_MV, STEP_6_25_MV, 0x10),
+};
+
static int s2mps14_regulator_enable(struct regulator_dev *rdev)
{
struct s2mps11_info *s2mps11 = rdev_get_drvdata(rdev);
unsigned int val;
switch (s2mps11->dev_type) {
+ case S2MPS13X:
case S2MPS14X:
if (s2mps11->s2mps14_suspend_state & (1 << rdev_get_id(rdev)))
val = S2MPS14_ENABLE_SUSPEND;
/* Below LDO should be always on or does not support suspend mode. */
switch (s2mps11->dev_type) {
+ case S2MPS13X:
case S2MPS14X:
switch (rdev_id) {
case S2MPS14_LDO3:
s2mps11->rdev_num = ARRAY_SIZE(s2mps11_regulators);
regulators = s2mps11_regulators;
break;
+ case S2MPS13X:
+ s2mps11->rdev_num = ARRAY_SIZE(s2mps13_regulators);
+ regulators = s2mps13_regulators;
+ break;
case S2MPS14X:
s2mps11->rdev_num = ARRAY_SIZE(s2mps14_regulators);
regulators = s2mps14_regulators;
return -EINVAL;
};
- s2mps11->ext_control_gpio = devm_kzalloc(&pdev->dev,
+ s2mps11->ext_control_gpio = devm_kmalloc(&pdev->dev,
sizeof(*s2mps11->ext_control_gpio) * s2mps11->rdev_num,
GFP_KERNEL);
if (!s2mps11->ext_control_gpio)
config.regmap = iodev->regmap_pmic;
config.driver_data = s2mps11;
config.ena_gpio_flags = GPIOF_OUT_INIT_HIGH;
+ config.ena_gpio_initialized = true;
for (i = 0; i < s2mps11->rdev_num; i++) {
struct regulator_dev *regulator;
static const struct platform_device_id s2mps11_pmic_id[] = {
{ "s2mps11-pmic", S2MPS11X},
+ { "s2mps13-pmic", S2MPS13X},
{ "s2mps14-pmic", S2MPS14X},
{ "s2mpu02-pmic", S2MPU02},
{ },
rdata->id = i;
rdata->initdata = of_get_regulator_init_data(
- &pdev->dev, reg_np);
+ &pdev->dev, reg_np,
+ ®ulators[i]);
rdata->reg_node = reg_np;
rdata++;
rmode->id = i;
config.of_node = pdata->regulators[i].reg_node;
config.ena_gpio = -EINVAL;
config.ena_gpio_flags = 0;
+ config.ena_gpio_initialized = true;
if (gpio_is_valid(pdata->regulators[i].ext_control_gpio))
s5m8767_regulator_config_ext_control(s5m8767,
&pdata->regulators[i], &config);
* Author : Gyungoh Yoo <jack.yoo@skyworksinc.com>
*
* This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
+ * under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
static const struct regulator_desc sky81452_reg = {
.name = "LOUT",
+ .of_match = of_match_ptr("lout"),
+ .regulators_node = of_match_ptr("regulator"),
.ops = &sky81452_reg_ops,
.type = REGULATOR_VOLTAGE,
.owner = THIS_MODULE,
.enable_mask = SKY81452_LEN,
};
-#ifdef CONFIG_OF
-static struct regulator_init_data *sky81452_reg_parse_dt(struct device *dev)
-{
- struct regulator_init_data *init_data;
- struct device_node *np;
-
- np = of_get_child_by_name(dev->parent->of_node, "regulator");
- if (unlikely(!np)) {
- dev_err(dev, "regulator node not found");
- return NULL;
- }
-
- init_data = of_get_regulator_init_data(dev, np);
-
- of_node_put(np);
- return init_data;
-}
-#else
-static struct regulator_init_data *sky81452_reg_parse_dt(struct device *dev)
-{
- return ERR_PTR(-EINVAL);
-}
-#endif
-
static int sky81452_reg_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
struct regulator_config config = { };
struct regulator_dev *rdev;
- if (!init_data) {
- init_data = sky81452_reg_parse_dt(dev);
- if (IS_ERR(init_data))
- return PTR_ERR(init_data);
- }
-
- config.dev = dev;
+ config.dev = dev->parent;
config.init_data = init_data;
config.of_node = dev->of_node;
config.regmap = dev_get_drvdata(dev->parent);
rdev = devm_regulator_register(dev, &sky81452_reg, &config);
- if (IS_ERR(rdev))
+ if (IS_ERR(rdev)) {
+ dev_err(dev, "failed to register. err=%ld\n", PTR_ERR(rdev));
return PTR_ERR(rdev);
+ }
platform_set_drvdata(pdev, rdev);
MODULE_DESCRIPTION("Skyworks SKY81452 Regulator driver");
MODULE_AUTHOR("Gyungoh Yoo <jack.yoo@skyworksinc.com>");
-MODULE_LICENSE("GPL");
-MODULE_VERSION("1.0");
+MODULE_LICENSE("GPL v2");
config.regmap = stw481x->map;
config.of_node = pdev->dev.of_node;
config.init_data = of_get_regulator_init_data(&pdev->dev,
- pdev->dev.of_node);
+ pdev->dev.of_node,
+ &vmmc_regulator);
stw481x->vmmc_regulator = devm_regulator_register(&pdev->dev,
&vmmc_regulator, &config);
return -EINVAL;
}
- initdata = of_get_regulator_init_data(dev, pdev->dev.of_node);
+ initdata = of_get_regulator_init_data(dev, pdev->dev.of_node,
+ &abb->rdesc);
if (!initdata) {
dev_err(dev, "%s: Unable to alloc regulator init data\n",
__func__);
MODULE_DEVICE_TABLE(of, tps51632_of_match);
static struct tps51632_regulator_platform_data *
- of_get_tps51632_platform_data(struct device *dev)
+ of_get_tps51632_platform_data(struct device *dev,
+ const struct regulator_desc *desc)
{
struct tps51632_regulator_platform_data *pdata;
struct device_node *np = dev->of_node;
if (!pdata)
return NULL;
- pdata->reg_init_data = of_get_regulator_init_data(dev, dev->of_node);
+ pdata->reg_init_data = of_get_regulator_init_data(dev, dev->of_node,
+ desc);
if (!pdata->reg_init_data) {
dev_err(dev, "Not able to get OF regulator init data\n");
return NULL;
}
#else
static struct tps51632_regulator_platform_data *
- of_get_tps51632_platform_data(struct device *dev)
+ of_get_tps51632_platform_data(struct device *dev,
+ const struct regulator_desc *desc)
{
return NULL;
}
}
}
+ tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
+ if (!tps)
+ return -ENOMEM;
+
+ tps->dev = &client->dev;
+ tps->desc.name = client->name;
+ tps->desc.id = 0;
+ tps->desc.ramp_delay = TPS51632_DEFAULT_RAMP_DELAY;
+ tps->desc.min_uV = TPS51632_MIN_VOLTAGE;
+ tps->desc.uV_step = TPS51632_VOLTAGE_STEP_10mV;
+ tps->desc.linear_min_sel = TPS51632_MIN_VSEL;
+ tps->desc.n_voltages = TPS51632_MAX_VSEL + 1;
+ tps->desc.ops = &tps51632_dcdc_ops;
+ tps->desc.type = REGULATOR_VOLTAGE;
+ tps->desc.owner = THIS_MODULE;
+
pdata = dev_get_platdata(&client->dev);
if (!pdata && client->dev.of_node)
- pdata = of_get_tps51632_platform_data(&client->dev);
+ pdata = of_get_tps51632_platform_data(&client->dev, &tps->desc);
if (!pdata) {
dev_err(&client->dev, "No Platform data\n");
return -EINVAL;
}
}
- tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
- if (!tps)
- return -ENOMEM;
-
- tps->dev = &client->dev;
- tps->desc.name = client->name;
- tps->desc.id = 0;
- tps->desc.ramp_delay = TPS51632_DEFAULT_RAMP_DELAY;
- tps->desc.min_uV = TPS51632_MIN_VOLTAGE;
- tps->desc.uV_step = TPS51632_VOLTAGE_STEP_10mV;
- tps->desc.linear_min_sel = TPS51632_MIN_VSEL;
- tps->desc.n_voltages = TPS51632_MAX_VSEL + 1;
- tps->desc.ops = &tps51632_dcdc_ops;
- tps->desc.type = REGULATOR_VOLTAGE;
- tps->desc.owner = THIS_MODULE;
-
if (pdata->enable_pwm_dvfs)
tps->desc.vsel_reg = TPS51632_VOLTAGE_BASE_REG;
else
};
static struct tps62360_regulator_platform_data *
- of_get_tps62360_platform_data(struct device *dev)
+ of_get_tps62360_platform_data(struct device *dev,
+ const struct regulator_desc *desc)
{
struct tps62360_regulator_platform_data *pdata;
struct device_node *np = dev->of_node;
if (!pdata)
return NULL;
- pdata->reg_init_data = of_get_regulator_init_data(dev, dev->of_node);
+ pdata->reg_init_data = of_get_regulator_init_data(dev, dev->of_node,
+ desc);
if (!pdata->reg_init_data) {
dev_err(dev, "Not able to get OF regulator init data\n");
return NULL;
pdata = dev_get_platdata(&client->dev);
+ tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
+ if (!tps)
+ return -ENOMEM;
+
+ tps->desc.name = client->name;
+ tps->desc.id = 0;
+ tps->desc.ops = &tps62360_dcdc_ops;
+ tps->desc.type = REGULATOR_VOLTAGE;
+ tps->desc.owner = THIS_MODULE;
+ tps->desc.uV_step = 10000;
+
if (client->dev.of_node) {
const struct of_device_id *match;
match = of_match_device(of_match_ptr(tps62360_of_match),
}
chip_id = (int)(long)match->data;
if (!pdata)
- pdata = of_get_tps62360_platform_data(&client->dev);
+ pdata = of_get_tps62360_platform_data(&client->dev,
+ &tps->desc);
} else if (id) {
chip_id = id->driver_data;
} else {
return -EIO;
}
- tps = devm_kzalloc(&client->dev, sizeof(*tps), GFP_KERNEL);
- if (!tps)
- return -ENOMEM;
-
tps->en_discharge = pdata->en_discharge;
tps->en_internal_pulldn = pdata->en_internal_pulldn;
tps->vsel0_gpio = pdata->vsel0_gpio;
return -ENODEV;
}
- tps->desc.name = client->name;
- tps->desc.id = 0;
- tps->desc.ops = &tps62360_dcdc_ops;
- tps->desc.type = REGULATOR_VOLTAGE;
- tps->desc.owner = THIS_MODULE;
- tps->desc.uV_step = 10000;
-
tps->regmap = devm_regmap_init_i2c(client, &tps62360_regmap_config);
if (IS_ERR(tps->regmap)) {
ret = PTR_ERR(tps->regmap);
gpio_flag = GPIOF_OUT_INIT_HIGH;
config->ena_gpio = tps_pdata->gpio;
+ config->ena_gpio_initialized = true;
config->ena_gpio_flags = gpio_flag;
+ } else {
+ config->ena_gpio = -EINVAL;
+ config->ena_gpio_initialized = false;
}
}
template = match->data;
id = template->id;
- init_data = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node);
+ init_data = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node,
+ ®ulators[id]);
platform_set_drvdata(pdev, tps);
template = match->data;
id = template->desc.id;
initdata = of_get_regulator_init_data(&pdev->dev,
- pdev->dev.of_node);
+ pdev->dev.of_node,
+ &template->desc);
drvdata = NULL;
} else {
id = pdev->id;
reg->desc.owner = THIS_MODULE;
reg->desc.continuous_voltage_range = true;
- init_data = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node);
+ init_data = of_get_regulator_init_data(&pdev->dev, pdev->dev.of_node,
+ ®->desc);
if (!init_data)
return -EINVAL;
config.driver_data = ldo;
config.regmap = wm8994->regmap;
config.init_data = &ldo->init_data;
- if (pdata)
+ if (pdata) {
config.ena_gpio = pdata->ldo[id].enable;
- else if (wm8994->dev->of_node)
+ } else if (wm8994->dev->of_node) {
config.ena_gpio = wm8994->pdata.ldo[id].enable;
+ config.ena_gpio_initialized = true;
+ }
/* Use default constraints if none set up */
if (!pdata || !pdata->ldo[id].init_data || wm8994->dev->of_node) {
obj-$(CONFIG_RESET_CONTROLLER) += core.o
obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
+obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o
obj-$(CONFIG_ARCH_SUNXI) += reset-sunxi.o
obj-$(CONFIG_ARCH_STI) += sti/
}
EXPORT_SYMBOL_GPL(reset_control_deassert);
+/**
+ * reset_control_status - returns a negative errno if not supported, a
+ * positive value if the reset line is asserted, or zero if the reset
+ * line is not asserted.
+ * @rstc: reset controller
+ */
+int reset_control_status(struct reset_control *rstc)
+{
+ if (rstc->rcdev->ops->status)
+ return rstc->rcdev->ops->status(rstc->rcdev, rstc->id);
+
+ return -ENOSYS;
+}
+EXPORT_SYMBOL_GPL(reset_control_status);
+
/**
* of_reset_control_get - Lookup and obtain a reference to a reset controller.
* @node: device to be reset by the controller
--- /dev/null
+/*
+ * Copyright (C) 2014 Marvell Technology Group Ltd.
+ *
+ * Antoine Tenart <antoine.tenart@free-electrons.com>
+ * Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+ *
+ * This file is licensed under the terms of the GNU General Public
+ * License version 2. This program is licensed "as is" without any
+ * warranty of any kind, whether express or implied.
+ */
+
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/reset-controller.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+
+#define BERLIN_MAX_RESETS 32
+
+#define to_berlin_reset_priv(p) \
+ container_of((p), struct berlin_reset_priv, rcdev)
+
+struct berlin_reset_priv {
+ void __iomem *base;
+ unsigned int size;
+ struct reset_controller_dev rcdev;
+};
+
+static int berlin_reset_reset(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct berlin_reset_priv *priv = to_berlin_reset_priv(rcdev);
+ int offset = id >> 8;
+ int mask = BIT(id & 0x1f);
+
+ writel(mask, priv->base + offset);
+
+ /* let the reset be effective */
+ udelay(10);
+
+ return 0;
+}
+
+static struct reset_control_ops berlin_reset_ops = {
+ .reset = berlin_reset_reset,
+};
+
+static int berlin_reset_xlate(struct reset_controller_dev *rcdev,
+ const struct of_phandle_args *reset_spec)
+{
+ struct berlin_reset_priv *priv = to_berlin_reset_priv(rcdev);
+ unsigned offset, bit;
+
+ if (WARN_ON(reset_spec->args_count != rcdev->of_reset_n_cells))
+ return -EINVAL;
+
+ offset = reset_spec->args[0];
+ bit = reset_spec->args[1];
+
+ if (offset >= priv->size)
+ return -EINVAL;
+
+ if (bit >= BERLIN_MAX_RESETS)
+ return -EINVAL;
+
+ return (offset << 8) | bit;
+}
+
+static int __berlin_reset_init(struct device_node *np)
+{
+ struct berlin_reset_priv *priv;
+ struct resource res;
+ resource_size_t size;
+ int ret;
+
+ priv = kzalloc(sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ ret = of_address_to_resource(np, 0, &res);
+ if (ret)
+ goto err;
+
+ size = resource_size(&res);
+ priv->base = ioremap(res.start, size);
+ if (!priv->base) {
+ ret = -ENOMEM;
+ goto err;
+ }
+ priv->size = size;
+
+ priv->rcdev.owner = THIS_MODULE;
+ priv->rcdev.ops = &berlin_reset_ops;
+ priv->rcdev.of_node = np;
+ priv->rcdev.of_reset_n_cells = 2;
+ priv->rcdev.of_xlate = berlin_reset_xlate;
+
+ reset_controller_register(&priv->rcdev);
+
+ return 0;
+
+err:
+ kfree(priv);
+ return ret;
+}
+
+static const struct of_device_id berlin_reset_of_match[] __initconst = {
+ { .compatible = "marvell,berlin2-chip-ctrl" },
+ { .compatible = "marvell,berlin2cd-chip-ctrl" },
+ { .compatible = "marvell,berlin2q-chip-ctrl" },
+ { },
+};
+
+static int __init berlin_reset_init(void)
+{
+ struct device_node *np;
+ int ret;
+
+ for_each_matching_node(np, berlin_reset_of_match) {
+ ret = __berlin_reset_init(np);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+arch_initcall(berlin_reset_init);
return 0;
}
+static int socfpga_reset_status(struct reset_controller_dev *rcdev,
+ unsigned long id)
+{
+ struct socfpga_reset_data *data = container_of(rcdev,
+ struct socfpga_reset_data, rcdev);
+ int bank = id / BITS_PER_LONG;
+ int offset = id % BITS_PER_LONG;
+ u32 reg;
+
+ reg = readl(data->membase + OFFSET_MODRST + (bank * NR_BANKS));
+
+ return !(reg & BIT(offset));
+}
+
static struct reset_control_ops socfpga_reset_ops = {
.assert = socfpga_reset_assert,
.deassert = socfpga_reset_deassert,
+ .status = socfpga_reset_status,
};
static int socfpga_reset_probe(struct platform_device *pdev)
bool
select STI_RESET_SYSCFG
+config STIH407_RESET
+ bool
+ select STI_RESET_SYSCFG
+
endif
obj-$(CONFIG_STIH415_RESET) += reset-stih415.o
obj-$(CONFIG_STIH416_RESET) += reset-stih416.o
+obj-$(CONFIG_STIH407_RESET) += reset-stih407.o
--- /dev/null
+/*
+ * Copyright (C) 2014 STMicroelectronics (R&D) Limited
+ * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <dt-bindings/reset-controller/stih407-resets.h>
+#include "reset-syscfg.h"
+
+/* STiH407 Peripheral powerdown definitions. */
+static const char stih407_core[] = "st,stih407-core-syscfg";
+static const char stih407_sbc_reg[] = "st,stih407-sbc-reg-syscfg";
+static const char stih407_lpm[] = "st,stih407-lpm-syscfg";
+
+#define STIH407_PDN_0(_bit) \
+ _SYSCFG_RST_CH(stih407_core, SYSCFG_5000, _bit, SYSSTAT_5500, _bit)
+#define STIH407_PDN_1(_bit) \
+ _SYSCFG_RST_CH(stih407_core, SYSCFG_5001, _bit, SYSSTAT_5501, _bit)
+#define STIH407_PDN_ETH(_bit, _stat) \
+ _SYSCFG_RST_CH(stih407_sbc_reg, SYSCFG_4032, _bit, SYSSTAT_4520, _stat)
+
+/* Powerdown requests control 0 */
+#define SYSCFG_5000 0x0
+#define SYSSTAT_5500 0x7d0
+/* Powerdown requests control 1 (High Speed Links) */
+#define SYSCFG_5001 0x4
+#define SYSSTAT_5501 0x7d4
+
+/* Ethernet powerdown/status/reset */
+#define SYSCFG_4032 0x80
+#define SYSSTAT_4520 0x820
+#define SYSCFG_4002 0x8
+
+static const struct syscfg_reset_channel_data stih407_powerdowns[] = {
+ [STIH407_EMISS_POWERDOWN] = STIH407_PDN_0(1),
+ [STIH407_NAND_POWERDOWN] = STIH407_PDN_0(0),
+ [STIH407_USB3_POWERDOWN] = STIH407_PDN_1(6),
+ [STIH407_USB2_PORT1_POWERDOWN] = STIH407_PDN_1(5),
+ [STIH407_USB2_PORT0_POWERDOWN] = STIH407_PDN_1(4),
+ [STIH407_PCIE1_POWERDOWN] = STIH407_PDN_1(3),
+ [STIH407_PCIE0_POWERDOWN] = STIH407_PDN_1(2),
+ [STIH407_SATA1_POWERDOWN] = STIH407_PDN_1(1),
+ [STIH407_SATA0_POWERDOWN] = STIH407_PDN_1(0),
+ [STIH407_ETH1_POWERDOWN] = STIH407_PDN_ETH(0, 2),
+};
+
+/* Reset Generator control 0/1 */
+#define SYSCFG_5131 0x20c
+#define SYSCFG_5132 0x210
+
+#define LPM_SYSCFG_1 0x4 /* Softreset IRB & SBC UART */
+
+#define STIH407_SRST_CORE(_reg, _bit) \
+ _SYSCFG_RST_CH_NO_ACK(stih407_core, _reg, _bit)
+
+#define STIH407_SRST_SBC(_reg, _bit) \
+ _SYSCFG_RST_CH_NO_ACK(stih407_sbc_reg, _reg, _bit)
+
+#define STIH407_SRST_LPM(_reg, _bit) \
+ _SYSCFG_RST_CH_NO_ACK(stih407_lpm, _reg, _bit)
+
+static const struct syscfg_reset_channel_data stih407_softresets[] = {
+ [STIH407_ETH1_SOFTRESET] = STIH407_SRST_SBC(SYSCFG_4002, 4),
+ [STIH407_MMC1_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 3),
+ [STIH407_USB2_PORT0_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 28),
+ [STIH407_USB2_PORT1_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 29),
+ [STIH407_PICOPHY_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 30),
+ [STIH407_IRB_SOFTRESET] = STIH407_SRST_LPM(LPM_SYSCFG_1, 6),
+ [STIH407_PCIE0_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 6),
+ [STIH407_PCIE1_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 15),
+ [STIH407_SATA0_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 7),
+ [STIH407_SATA1_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 16),
+ [STIH407_MIPHY0_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 4),
+ [STIH407_MIPHY1_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 13),
+ [STIH407_MIPHY2_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 22),
+ [STIH407_SATA0_PWR_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 5),
+ [STIH407_SATA1_PWR_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 14),
+ [STIH407_DELTA_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 3),
+ [STIH407_BLITTER_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 10),
+ [STIH407_HDTVOUT_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 11),
+ [STIH407_HDQVDP_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 12),
+ [STIH407_VDP_AUX_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 14),
+ [STIH407_COMPO_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 15),
+ [STIH407_HDMI_TX_PHY_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 21),
+ [STIH407_JPEG_DEC_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 23),
+ [STIH407_VP8_DEC_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 24),
+ [STIH407_GPU_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5131, 30),
+ [STIH407_HVA_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 0),
+ [STIH407_ERAM_HVA_SOFTRESET] = STIH407_SRST_CORE(SYSCFG_5132, 1),
+ [STIH407_LPM_SOFTRESET] = STIH407_SRST_SBC(SYSCFG_4002, 2),
+ [STIH407_KEYSCAN_SOFTRESET] = STIH407_SRST_LPM(LPM_SYSCFG_1, 8),
+};
+
+/* PicoPHY reset/control */
+#define SYSCFG_5061 0x0f4
+
+static const struct syscfg_reset_channel_data stih407_picophyresets[] = {
+ [STIH407_PICOPHY0_RESET] = STIH407_SRST_CORE(SYSCFG_5061, 5),
+ [STIH407_PICOPHY1_RESET] = STIH407_SRST_CORE(SYSCFG_5061, 6),
+ [STIH407_PICOPHY2_RESET] = STIH407_SRST_CORE(SYSCFG_5061, 7),
+};
+
+static const struct syscfg_reset_controller_data stih407_powerdown_controller = {
+ .wait_for_ack = true,
+ .nr_channels = ARRAY_SIZE(stih407_powerdowns),
+ .channels = stih407_powerdowns,
+};
+
+static const struct syscfg_reset_controller_data stih407_softreset_controller = {
+ .wait_for_ack = false,
+ .active_low = true,
+ .nr_channels = ARRAY_SIZE(stih407_softresets),
+ .channels = stih407_softresets,
+};
+
+static const struct syscfg_reset_controller_data stih407_picophyreset_controller = {
+ .wait_for_ack = false,
+ .nr_channels = ARRAY_SIZE(stih407_picophyresets),
+ .channels = stih407_picophyresets,
+};
+
+static struct of_device_id stih407_reset_match[] = {
+ {
+ .compatible = "st,stih407-powerdown",
+ .data = &stih407_powerdown_controller,
+ },
+ {
+ .compatible = "st,stih407-softreset",
+ .data = &stih407_softreset_controller,
+ },
+ {
+ .compatible = "st,stih407-picophyreset",
+ .data = &stih407_picophyreset_controller,
+ },
+ { /* sentinel */ },
+};
+
+static struct platform_driver stih407_reset_driver = {
+ .probe = syscfg_reset_probe,
+ .driver = {
+ .name = "reset-stih407",
+ .of_match_table = stih407_reset_match,
+ },
+};
+
+static int __init stih407_reset_init(void)
+{
+ return platform_driver_register(&stih407_reset_driver);
+}
+
+arch_initcall(stih407_reset_init);
config RTC_DRV_EFI
tristate "EFI RTC"
- depends on EFI
+ depends on EFI && !X86
help
If you say yes here you will get support for the EFI
Real Time Clock.
this is powered by the backup power supply.
config RTC_DRV_AT91SAM9
- tristate "AT91SAM9x/AT91CAP9 RTT as RTC"
- depends on ARCH_AT91 && !(ARCH_AT91RM9200 || ARCH_AT91X40)
+ tristate "AT91SAM9 RTT as RTC"
+ depends on ARCH_AT91
+ select MFD_SYSCON
help
- RTC driver for the Atmel AT91SAM9x and AT91CAP9 internal RTT
- (Real Time Timer). These timers are powered by the backup power
- supply (such as a small coin cell battery), but do not need to
- be used as RTCs.
-
- (On AT91SAM9rl and AT91SAM9G45 chips you probably want to use the
- dedicated RTC module and leave the RTT available for other uses.)
+ Some AT91SAM9 SoCs provide an RTT (Real Time Timer) block which
+ can be used as an RTC thanks to the backup power supply (e.g. a
+ small coin cell battery) which keeps this block and the GPBR
+ (General Purpose Backup Registers) block powered when the device
+ is shutdown.
+ Some AT91SAM9 SoCs provide a real RTC block, on those ones you'd
+ probably want to use the real RTC block instead of the "RTT as an
+ RTC" driver.
config RTC_DRV_AT91SAM9_RTT
int
range 0 1
default 0
- prompt "RTT module Number" if ARCH_AT91SAM9263
depends on RTC_DRV_AT91SAM9
help
+ This option is only relevant for legacy board support and
+ won't be used when booting a DT board.
+
More than one RTT module is available. You can choose which
one will be used as an RTC. The default of zero is normally
OK to use, though some systems use that for non-RTC purposes.
config RTC_DRV_AT91SAM9_GPBR
int
- range 0 3 if !ARCH_AT91SAM9263
- range 0 15 if ARCH_AT91SAM9263
+ range 0 3
default 0
prompt "Backup Register Number"
depends on RTC_DRV_AT91SAM9
help
+ This option is only relevant for legacy board support and
+ won't be used when booting a DT board.
+
The RTC driver needs to use one of the General Purpose Backup
Registers (GPBRs) as well as the RTT. You can choose which one
will be used. The default of zero is normally OK to use, but
config RTC_DRV_PM8XXX
tristate "Qualcomm PMIC8XXX RTC"
- depends on MFD_PM8XXX
+ depends on MFD_PM8XXX || MFD_SPMI_PMIC
help
If you say yes here you get support for the
Qualcomm PMIC8XXX RTC.
* system's wall clock; restore it on resume().
*/
-static struct timespec old_rtc, old_system, old_delta;
+static struct timespec64 old_rtc, old_system, old_delta;
static int rtc_suspend(struct device *dev)
{
struct rtc_device *rtc = to_rtc_device(dev);
struct rtc_time tm;
- struct timespec delta, delta_delta;
+ struct timespec64 delta, delta_delta;
int err;
if (has_persistent_clock())
return 0;
}
- getnstimeofday(&old_system);
- rtc_tm_to_time(&tm, &old_rtc.tv_sec);
+ getnstimeofday64(&old_system);
+ old_rtc.tv_sec = rtc_tm_to_time64(&tm);
/*
* try to compensate so the difference in system time
* and rtc time stays close to constant.
*/
- delta = timespec_sub(old_system, old_rtc);
- delta_delta = timespec_sub(delta, old_delta);
+ delta = timespec64_sub(old_system, old_rtc);
+ delta_delta = timespec64_sub(delta, old_delta);
if (delta_delta.tv_sec < -2 || delta_delta.tv_sec >= 2) {
/*
* if delta_delta is too large, assume time correction
old_delta = delta;
} else {
/* Otherwise try to adjust old_system to compensate */
- old_system = timespec_sub(old_system, delta_delta);
+ old_system = timespec64_sub(old_system, delta_delta);
}
return 0;
{
struct rtc_device *rtc = to_rtc_device(dev);
struct rtc_time tm;
- struct timespec new_system, new_rtc;
- struct timespec sleep_time;
+ struct timespec64 new_system, new_rtc;
+ struct timespec64 sleep_time;
int err;
if (has_persistent_clock())
return 0;
/* snapshot the current rtc and system time at resume */
- getnstimeofday(&new_system);
+ getnstimeofday64(&new_system);
err = rtc_read_time(rtc, &tm);
if (err < 0) {
pr_debug("%s: fail to read rtc time\n", dev_name(&rtc->dev));
pr_debug("%s: bogus resume time\n", dev_name(&rtc->dev));
return 0;
}
- rtc_tm_to_time(&tm, &new_rtc.tv_sec);
+ new_rtc.tv_sec = rtc_tm_to_time64(&tm);
new_rtc.tv_nsec = 0;
if (new_rtc.tv_sec < old_rtc.tv_sec) {
}
/* calculate the RTC time delta (sleep time)*/
- sleep_time = timespec_sub(new_rtc, old_rtc);
+ sleep_time = timespec64_sub(new_rtc, old_rtc);
/*
* Since these RTC suspend/resume handlers are not called
* so subtract kernel run-time between rtc_suspend to rtc_resume
* to keep things accurate.
*/
- sleep_time = timespec_sub(sleep_time,
- timespec_sub(new_system, old_system));
+ sleep_time = timespec64_sub(sleep_time,
+ timespec64_sub(new_system, old_system));
if (sleep_time.tv_sec >= 0)
- timekeeping_inject_sleeptime(&sleep_time);
+ timekeeping_inject_sleeptime64(&sleep_time);
rtc_hctosys_ret = 0;
return 0;
}
#include <linux/slab.h>
#include <linux/platform_data/atmel.h>
#include <linux/io.h>
-
-#include <mach/at91_rtt.h>
-#include <mach/cpu.h>
-#include <mach/hardware.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/clk.h>
/*
* This driver uses two configurable hardware resources that live in the
* registers available, likewise usable for more than "RTC" support.
*/
+#define AT91_RTT_MR 0x00 /* Real-time Mode Register */
+#define AT91_RTT_RTPRES (0xffff << 0) /* Real-time Timer Prescaler Value */
+#define AT91_RTT_ALMIEN (1 << 16) /* Alarm Interrupt Enable */
+#define AT91_RTT_RTTINCIEN (1 << 17) /* Real Time Timer Increment Interrupt Enable */
+#define AT91_RTT_RTTRST (1 << 18) /* Real Time Timer Restart */
+
+#define AT91_RTT_AR 0x04 /* Real-time Alarm Register */
+#define AT91_RTT_ALMV (0xffffffff) /* Alarm Value */
+
+#define AT91_RTT_VR 0x08 /* Real-time Value Register */
+#define AT91_RTT_CRTV (0xffffffff) /* Current Real-time Value */
+
+#define AT91_RTT_SR 0x0c /* Real-time Status Register */
+#define AT91_RTT_ALMS (1 << 0) /* Real-time Alarm Status */
+#define AT91_RTT_RTTINC (1 << 1) /* Real-time Timer Increment */
+
/*
* We store ALARM_DISABLED in ALMV to record that no alarm is set.
* It's also the reset value for that field.
void __iomem *rtt;
struct rtc_device *rtcdev;
u32 imr;
- void __iomem *gpbr;
+ struct regmap *gpbr;
+ unsigned int gpbr_offset;
int irq;
+ struct clk *sclk;
};
#define rtt_readl(rtc, field) \
- __raw_readl((rtc)->rtt + AT91_RTT_ ## field)
+ readl((rtc)->rtt + AT91_RTT_ ## field)
#define rtt_writel(rtc, field, val) \
- __raw_writel((val), (rtc)->rtt + AT91_RTT_ ## field)
+ writel((val), (rtc)->rtt + AT91_RTT_ ## field)
+
+static inline unsigned int gpbr_readl(struct sam9_rtc *rtc)
+{
+ unsigned int val;
+
+ regmap_read(rtc->gpbr, rtc->gpbr_offset, &val);
-#define gpbr_readl(rtc) \
- __raw_readl((rtc)->gpbr)
-#define gpbr_writel(rtc, val) \
- __raw_writel((val), (rtc)->gpbr)
+ return val;
+}
+
+static inline void gpbr_writel(struct sam9_rtc *rtc, unsigned int val)
+{
+ regmap_write(rtc->gpbr, rtc->gpbr_offset, val);
+}
/*
* Read current time and date in RTC
.alarm_irq_enable = at91_rtc_alarm_irq_enable,
};
+static struct regmap_config gpbr_regmap_config = {
+ .reg_bits = 32,
+ .val_bits = 32,
+ .reg_stride = 4,
+};
+
/*
* Initialize and install RTC driver
*/
static int at91_rtc_probe(struct platform_device *pdev)
{
- struct resource *r, *r_gpbr;
+ struct resource *r;
struct sam9_rtc *rtc;
int ret, irq;
u32 mr;
-
- r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- r_gpbr = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (!r || !r_gpbr) {
- dev_err(&pdev->dev, "need 2 ressources\n");
- return -ENODEV;
- }
+ unsigned int sclk_rate;
irq = platform_get_irq(pdev, 0);
if (irq < 0) {
device_init_wakeup(&pdev->dev, 1);
platform_set_drvdata(pdev, rtc);
- rtc->rtt = devm_ioremap(&pdev->dev, r->start, resource_size(r));
- if (!rtc->rtt) {
- dev_err(&pdev->dev, "failed to map registers, aborting.\n");
- return -ENOMEM;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ rtc->rtt = devm_ioremap_resource(&pdev->dev, r);
+ if (IS_ERR(rtc->rtt))
+ return PTR_ERR(rtc->rtt);
+
+ if (!pdev->dev.of_node) {
+ /*
+ * TODO: Remove this code chunk when removing non DT board
+ * support. Remember to remove the gpbr_regmap_config
+ * variable too.
+ */
+ void __iomem *gpbr;
+
+ r = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ gpbr = devm_ioremap_resource(&pdev->dev, r);
+ if (IS_ERR(gpbr))
+ return PTR_ERR(gpbr);
+
+ rtc->gpbr = regmap_init_mmio(NULL, gpbr,
+ &gpbr_regmap_config);
+ } else {
+ struct of_phandle_args args;
+
+ ret = of_parse_phandle_with_fixed_args(pdev->dev.of_node,
+ "atmel,rtt-rtc-time-reg", 1, 0,
+ &args);
+ if (ret)
+ return ret;
+
+ rtc->gpbr = syscon_node_to_regmap(args.np);
+ rtc->gpbr_offset = args.args[0];
}
- rtc->gpbr = devm_ioremap(&pdev->dev, r_gpbr->start,
- resource_size(r_gpbr));
- if (!rtc->gpbr) {
- dev_err(&pdev->dev, "failed to map gpbr registers, aborting.\n");
+ if (IS_ERR(rtc->gpbr)) {
+ dev_err(&pdev->dev, "failed to retrieve gpbr regmap, aborting.\n");
return -ENOMEM;
}
+ rtc->sclk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(rtc->sclk))
+ return PTR_ERR(rtc->sclk);
+
+ sclk_rate = clk_get_rate(rtc->sclk);
+ if (!sclk_rate || sclk_rate > AT91_RTT_RTPRES) {
+ dev_err(&pdev->dev, "Invalid slow clock rate\n");
+ return -EINVAL;
+ }
+
+ ret = clk_prepare_enable(rtc->sclk);
+ if (ret) {
+ dev_err(&pdev->dev, "Could not enable slow clock\n");
+ return ret;
+ }
+
mr = rtt_readl(rtc, MR);
/* unless RTT is counting at 1 Hz, re-initialize it */
- if ((mr & AT91_RTT_RTPRES) != AT91_SLOW_CLOCK) {
- mr = AT91_RTT_RTTRST | (AT91_SLOW_CLOCK & AT91_RTT_RTPRES);
+ if ((mr & AT91_RTT_RTPRES) != sclk_rate) {
+ mr = AT91_RTT_RTTRST | (sclk_rate & AT91_RTT_RTPRES);
gpbr_writel(rtc, 0);
}
/* disable all interrupts */
rtt_writel(rtc, MR, mr & ~(AT91_RTT_ALMIEN | AT91_RTT_RTTINCIEN));
+ if (!IS_ERR(rtc->sclk))
+ clk_disable_unprepare(rtc->sclk);
+
return 0;
}
static SIMPLE_DEV_PM_OPS(at91_rtc_pm_ops, at91_rtc_suspend, at91_rtc_resume);
+#ifdef CONFIG_OF
+static const struct of_device_id at91_rtc_dt_ids[] = {
+ { .compatible = "atmel,at91sam9260-rtt" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, at91_rtc_dt_ids);
+#endif
+
static struct platform_driver at91_rtc_driver = {
.probe = at91_rtc_probe,
.remove = at91_rtc_remove,
.name = "rtc-at91sam9",
.owner = THIS_MODULE,
.pm = &at91_rtc_pm_ops,
+ .of_match_table = of_match_ptr(at91_rtc_dt_ids),
},
};
dev_err(dev, "bq32k: diode and resistor mismatch\n");
return -EINVAL;
}
- reg = 0x25;
+ reg = 0x45;
break;
default:
MODULE_AUTHOR("dann frazier <dannf@hp.com>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("EFI RTC driver");
+MODULE_ALIAS("platform:rtc-efi");
}
EXPORT_SYMBOL(rtc_year_days);
+
/*
+ * rtc_time_to_tm64 - Converts time64_t to rtc_time.
* Convert seconds since 01-01-1970 00:00:00 to Gregorian date.
*/
-void rtc_time_to_tm(unsigned long time, struct rtc_time *tm)
+void rtc_time64_to_tm(time64_t time, struct rtc_time *tm)
{
unsigned int month, year;
+ unsigned long secs;
int days;
- days = time / 86400;
- time -= (unsigned int) days * 86400;
+ /* time must be positive */
+ days = div_s64(time, 86400);
+ secs = time - (unsigned int) days * 86400;
/* day of the week, 1970-01-01 was a Thursday */
tm->tm_wday = (days + 4) % 7;
tm->tm_mon = month;
tm->tm_mday = days + 1;
- tm->tm_hour = time / 3600;
- time -= tm->tm_hour * 3600;
- tm->tm_min = time / 60;
- tm->tm_sec = time - tm->tm_min * 60;
+ tm->tm_hour = secs / 3600;
+ secs -= tm->tm_hour * 3600;
+ tm->tm_min = secs / 60;
+ tm->tm_sec = secs - tm->tm_min * 60;
tm->tm_isdst = 0;
}
-EXPORT_SYMBOL(rtc_time_to_tm);
+EXPORT_SYMBOL(rtc_time64_to_tm);
/*
* Does the rtc_time represent a valid date/time?
EXPORT_SYMBOL(rtc_valid_tm);
/*
+ * rtc_tm_to_time64 - Converts rtc_time to time64_t.
* Convert Gregorian date to seconds since 01-01-1970 00:00:00.
*/
-int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time)
+time64_t rtc_tm_to_time64(struct rtc_time *tm)
{
- *time = mktime(tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday,
+ return mktime64(tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday,
tm->tm_hour, tm->tm_min, tm->tm_sec);
- return 0;
}
-EXPORT_SYMBOL(rtc_tm_to_time);
+EXPORT_SYMBOL(rtc_tm_to_time64);
/*
* Convert rtc_time to ktime
*/
ktime_t rtc_tm_to_ktime(struct rtc_time tm)
{
- time_t time;
- rtc_tm_to_time(&tm, &time);
- return ktime_set(time, 0);
+ return ktime_set(rtc_tm_to_time64(&tm), 0);
}
EXPORT_SYMBOL_GPL(rtc_tm_to_ktime);
*/
struct rtc_time rtc_ktime_to_tm(ktime_t kt)
{
- struct timespec ts;
+ struct timespec64 ts;
struct rtc_time ret;
- ts = ktime_to_timespec(kt);
+ ts = ktime_to_timespec64(kt);
/* Round up any ns */
if (ts.tv_nsec)
ts.tv_sec++;
- rtc_time_to_tm(ts.tv_sec, &ret);
+ rtc_time64_to_tm(ts.tv_sec, &ret);
return ret;
}
EXPORT_SYMBOL_GPL(rtc_ktime_to_tm);
/* RTC_CTRL register bit fields */
#define PM8xxx_RTC_ENABLE BIT(7)
-#define PM8xxx_RTC_ALARM_ENABLE BIT(1)
#define PM8xxx_RTC_ALARM_CLEAR BIT(0)
#define NUM_8_BIT_RTC_REGS 0x4
+/**
+ * struct pm8xxx_rtc_regs - describe RTC registers per PMIC versions
+ * @ctrl: base address of control register
+ * @write: base address of write register
+ * @read: base address of read register
+ * @alarm_ctrl: base address of alarm control register
+ * @alarm_ctrl2: base address of alarm control2 register
+ * @alarm_rw: base address of alarm read-write register
+ * @alarm_en: alarm enable mask
+ */
+struct pm8xxx_rtc_regs {
+ unsigned int ctrl;
+ unsigned int write;
+ unsigned int read;
+ unsigned int alarm_ctrl;
+ unsigned int alarm_ctrl2;
+ unsigned int alarm_rw;
+ unsigned int alarm_en;
+};
+
/**
* struct pm8xxx_rtc - rtc driver internal structure
* @rtc: rtc device for this driver.
* @regmap: regmap used to access RTC registers
* @allow_set_time: indicates whether writing to the RTC is allowed
* @rtc_alarm_irq: rtc alarm irq number.
- * @rtc_base: address of rtc control register.
- * @rtc_read_base: base address of read registers.
- * @rtc_write_base: base address of write registers.
- * @alarm_rw_base: base address of alarm registers.
* @ctrl_reg: rtc control register.
* @rtc_dev: device structure.
* @ctrl_reg_lock: spinlock protecting access to ctrl_reg.
struct regmap *regmap;
bool allow_set_time;
int rtc_alarm_irq;
- int rtc_base;
- int rtc_read_base;
- int rtc_write_base;
- int alarm_rw_base;
- u8 ctrl_reg;
+ const struct pm8xxx_rtc_regs *regs;
struct device *rtc_dev;
spinlock_t ctrl_reg_lock;
};
{
int rc, i;
unsigned long secs, irq_flags;
- u8 value[NUM_8_BIT_RTC_REGS], alarm_enabled = 0, ctrl_reg;
+ u8 value[NUM_8_BIT_RTC_REGS], alarm_enabled = 0;
+ unsigned int ctrl_reg;
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+ const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
if (!rtc_dd->allow_set_time)
return -EACCES;
dev_dbg(dev, "Seconds value to be written to RTC = %lu\n", secs);
spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
- ctrl_reg = rtc_dd->ctrl_reg;
- if (ctrl_reg & PM8xxx_RTC_ALARM_ENABLE) {
+ rc = regmap_read(rtc_dd->regmap, regs->ctrl, &ctrl_reg);
+ if (rc)
+ goto rtc_rw_fail;
+
+ if (ctrl_reg & regs->alarm_en) {
alarm_enabled = 1;
- ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
- rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
+ ctrl_reg &= ~regs->alarm_en;
+ rc = regmap_write(rtc_dd->regmap, regs->ctrl, ctrl_reg);
if (rc) {
dev_err(dev, "Write to RTC control register failed\n");
goto rtc_rw_fail;
}
- rtc_dd->ctrl_reg = ctrl_reg;
- } else {
- spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
}
/* Write 0 to Byte[0] */
- rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_write_base, 0);
+ rc = regmap_write(rtc_dd->regmap, regs->write, 0);
if (rc) {
dev_err(dev, "Write to RTC write data register failed\n");
goto rtc_rw_fail;
}
/* Write Byte[1], Byte[2], Byte[3] */
- rc = regmap_bulk_write(rtc_dd->regmap, rtc_dd->rtc_write_base + 1,
+ rc = regmap_bulk_write(rtc_dd->regmap, regs->write + 1,
&value[1], sizeof(value) - 1);
if (rc) {
dev_err(dev, "Write to RTC write data register failed\n");
}
/* Write Byte[0] */
- rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_write_base, value[0]);
+ rc = regmap_write(rtc_dd->regmap, regs->write, value[0]);
if (rc) {
dev_err(dev, "Write to RTC write data register failed\n");
goto rtc_rw_fail;
}
if (alarm_enabled) {
- ctrl_reg |= PM8xxx_RTC_ALARM_ENABLE;
- rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
+ ctrl_reg |= regs->alarm_en;
+ rc = regmap_write(rtc_dd->regmap, regs->ctrl, ctrl_reg);
if (rc) {
dev_err(dev, "Write to RTC control register failed\n");
goto rtc_rw_fail;
}
- rtc_dd->ctrl_reg = ctrl_reg;
}
rtc_rw_fail:
- if (alarm_enabled)
- spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+ spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
return rc;
}
unsigned long secs;
unsigned int reg;
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+ const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
- rc = regmap_bulk_read(rtc_dd->regmap, rtc_dd->rtc_read_base,
- value, sizeof(value));
+ rc = regmap_bulk_read(rtc_dd->regmap, regs->read, value, sizeof(value));
if (rc) {
dev_err(dev, "RTC read data register failed\n");
return rc;
* Read the LSB again and check if there has been a carry over.
* If there is, redo the read operation.
*/
- rc = regmap_read(rtc_dd->regmap, rtc_dd->rtc_read_base, ®);
+ rc = regmap_read(rtc_dd->regmap, regs->read, ®);
if (rc < 0) {
dev_err(dev, "RTC read data register failed\n");
return rc;
}
if (unlikely(reg < value[0])) {
- rc = regmap_bulk_read(rtc_dd->regmap, rtc_dd->rtc_read_base,
+ rc = regmap_bulk_read(rtc_dd->regmap, regs->read,
value, sizeof(value));
if (rc) {
dev_err(dev, "RTC read data register failed\n");
static int pm8xxx_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alarm)
{
int rc, i;
- u8 value[NUM_8_BIT_RTC_REGS], ctrl_reg;
+ u8 value[NUM_8_BIT_RTC_REGS];
+ unsigned int ctrl_reg;
unsigned long secs, irq_flags;
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+ const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
rtc_tm_to_time(&alarm->time, &secs);
spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
- rc = regmap_bulk_write(rtc_dd->regmap, rtc_dd->alarm_rw_base, value,
+ rc = regmap_bulk_write(rtc_dd->regmap, regs->alarm_rw, value,
sizeof(value));
if (rc) {
dev_err(dev, "Write to RTC ALARM register failed\n");
goto rtc_rw_fail;
}
- ctrl_reg = rtc_dd->ctrl_reg;
+ rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl, &ctrl_reg);
+ if (rc)
+ goto rtc_rw_fail;
if (alarm->enabled)
- ctrl_reg |= PM8xxx_RTC_ALARM_ENABLE;
+ ctrl_reg |= regs->alarm_en;
else
- ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
+ ctrl_reg &= ~regs->alarm_en;
- rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
+ rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl, ctrl_reg);
if (rc) {
- dev_err(dev, "Write to RTC control register failed\n");
+ dev_err(dev, "Write to RTC alarm control register failed\n");
goto rtc_rw_fail;
}
- rtc_dd->ctrl_reg = ctrl_reg;
-
dev_dbg(dev, "Alarm Set for h:r:s=%d:%d:%d, d/m/y=%d/%d/%d\n",
alarm->time.tm_hour, alarm->time.tm_min,
alarm->time.tm_sec, alarm->time.tm_mday,
u8 value[NUM_8_BIT_RTC_REGS];
unsigned long secs;
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
+ const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
- rc = regmap_bulk_read(rtc_dd->regmap, rtc_dd->alarm_rw_base, value,
+ rc = regmap_bulk_read(rtc_dd->regmap, regs->alarm_rw, value,
sizeof(value));
if (rc) {
dev_err(dev, "RTC alarm time read failed\n");
int rc;
unsigned long irq_flags;
struct pm8xxx_rtc *rtc_dd = dev_get_drvdata(dev);
- u8 ctrl_reg;
+ const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
+ unsigned int ctrl_reg;
spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
- ctrl_reg = rtc_dd->ctrl_reg;
+ rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl, &ctrl_reg);
+ if (rc)
+ goto rtc_rw_fail;
if (enable)
- ctrl_reg |= PM8xxx_RTC_ALARM_ENABLE;
+ ctrl_reg |= regs->alarm_en;
else
- ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
+ ctrl_reg &= ~regs->alarm_en;
- rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
+ rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl, ctrl_reg);
if (rc) {
dev_err(dev, "Write to RTC control register failed\n");
goto rtc_rw_fail;
}
- rtc_dd->ctrl_reg = ctrl_reg;
-
rtc_rw_fail:
spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
return rc;
static irqreturn_t pm8xxx_alarm_trigger(int irq, void *dev_id)
{
struct pm8xxx_rtc *rtc_dd = dev_id;
+ const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
unsigned int ctrl_reg;
int rc;
unsigned long irq_flags;
spin_lock_irqsave(&rtc_dd->ctrl_reg_lock, irq_flags);
/* Clear the alarm enable bit */
- ctrl_reg = rtc_dd->ctrl_reg;
- ctrl_reg &= ~PM8xxx_RTC_ALARM_ENABLE;
+ rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl, &ctrl_reg);
+ if (rc) {
+ spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
+ goto rtc_alarm_handled;
+ }
+
+ ctrl_reg &= ~regs->alarm_en;
- rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
+ rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl, ctrl_reg);
if (rc) {
spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
dev_err(rtc_dd->rtc_dev,
- "Write to RTC control register failed\n");
+ "Write to alarm control register failed\n");
goto rtc_alarm_handled;
}
- rtc_dd->ctrl_reg = ctrl_reg;
spin_unlock_irqrestore(&rtc_dd->ctrl_reg_lock, irq_flags);
/* Clear RTC alarm register */
- rc = regmap_read(rtc_dd->regmap,
- rtc_dd->rtc_base + PM8XXX_ALARM_CTRL_OFFSET,
- &ctrl_reg);
+ rc = regmap_read(rtc_dd->regmap, regs->alarm_ctrl2, &ctrl_reg);
if (rc) {
dev_err(rtc_dd->rtc_dev,
- "RTC Alarm control register read failed\n");
+ "RTC Alarm control2 register read failed\n");
goto rtc_alarm_handled;
}
- ctrl_reg &= ~PM8xxx_RTC_ALARM_CLEAR;
- rc = regmap_write(rtc_dd->regmap,
- rtc_dd->rtc_base + PM8XXX_ALARM_CTRL_OFFSET,
- ctrl_reg);
+ ctrl_reg |= PM8xxx_RTC_ALARM_CLEAR;
+ rc = regmap_write(rtc_dd->regmap, regs->alarm_ctrl2, ctrl_reg);
if (rc)
dev_err(rtc_dd->rtc_dev,
- "Write to RTC Alarm control register failed\n");
+ "Write to RTC Alarm control2 register failed\n");
rtc_alarm_handled:
return IRQ_HANDLED;
}
+static int pm8xxx_rtc_enable(struct pm8xxx_rtc *rtc_dd)
+{
+ const struct pm8xxx_rtc_regs *regs = rtc_dd->regs;
+ unsigned int ctrl_reg;
+ int rc;
+
+ /* Check if the RTC is on, else turn it on */
+ rc = regmap_read(rtc_dd->regmap, regs->ctrl, &ctrl_reg);
+ if (rc)
+ return rc;
+
+ if (!(ctrl_reg & PM8xxx_RTC_ENABLE)) {
+ ctrl_reg |= PM8xxx_RTC_ENABLE;
+ rc = regmap_write(rtc_dd->regmap, regs->ctrl, ctrl_reg);
+ if (rc)
+ return rc;
+ }
+
+ return 0;
+}
+
+static const struct pm8xxx_rtc_regs pm8921_regs = {
+ .ctrl = 0x11d,
+ .write = 0x11f,
+ .read = 0x123,
+ .alarm_rw = 0x127,
+ .alarm_ctrl = 0x11d,
+ .alarm_ctrl2 = 0x11e,
+ .alarm_en = BIT(1),
+};
+
+static const struct pm8xxx_rtc_regs pm8058_regs = {
+ .ctrl = 0x1e8,
+ .write = 0x1ea,
+ .read = 0x1ee,
+ .alarm_rw = 0x1f2,
+ .alarm_ctrl = 0x1e8,
+ .alarm_ctrl2 = 0x1e9,
+ .alarm_en = BIT(1),
+};
+
+static const struct pm8xxx_rtc_regs pm8941_regs = {
+ .ctrl = 0x6046,
+ .write = 0x6040,
+ .read = 0x6048,
+ .alarm_rw = 0x6140,
+ .alarm_ctrl = 0x6146,
+ .alarm_ctrl2 = 0x6148,
+ .alarm_en = BIT(7),
+};
+
/*
* Hardcoded RTC bases until IORESOURCE_REG mapping is figured out
*/
static const struct of_device_id pm8xxx_id_table[] = {
- { .compatible = "qcom,pm8921-rtc", .data = (void *) 0x11D },
- { .compatible = "qcom,pm8058-rtc", .data = (void *) 0x1E8 },
+ { .compatible = "qcom,pm8921-rtc", .data = &pm8921_regs },
+ { .compatible = "qcom,pm8058-rtc", .data = &pm8058_regs },
+ { .compatible = "qcom,pm8941-rtc", .data = &pm8941_regs },
{ },
};
MODULE_DEVICE_TABLE(of, pm8xxx_id_table);
static int pm8xxx_rtc_probe(struct platform_device *pdev)
{
int rc;
- unsigned int ctrl_reg;
struct pm8xxx_rtc *rtc_dd;
const struct of_device_id *match;
rtc_dd->allow_set_time = of_property_read_bool(pdev->dev.of_node,
"allow-set-time");
- rtc_dd->rtc_base = (long) match->data;
-
- /* Setup RTC register addresses */
- rtc_dd->rtc_write_base = rtc_dd->rtc_base + PM8XXX_RTC_WRITE_OFFSET;
- rtc_dd->rtc_read_base = rtc_dd->rtc_base + PM8XXX_RTC_READ_OFFSET;
- rtc_dd->alarm_rw_base = rtc_dd->rtc_base + PM8XXX_ALARM_RW_OFFSET;
-
+ rtc_dd->regs = match->data;
rtc_dd->rtc_dev = &pdev->dev;
- /* Check if the RTC is on, else turn it on */
- rc = regmap_read(rtc_dd->regmap, rtc_dd->rtc_base, &ctrl_reg);
- if (rc) {
- dev_err(&pdev->dev, "RTC control register read failed!\n");
+ rc = pm8xxx_rtc_enable(rtc_dd);
+ if (rc)
return rc;
- }
-
- if (!(ctrl_reg & PM8xxx_RTC_ENABLE)) {
- ctrl_reg |= PM8xxx_RTC_ENABLE;
- rc = regmap_write(rtc_dd->regmap, rtc_dd->rtc_base, ctrl_reg);
- if (rc) {
- dev_err(&pdev->dev,
- "Write to RTC control register failed\n");
- return rc;
- }
- }
-
- rtc_dd->ctrl_reg = ctrl_reg;
platform_set_drvdata(pdev, rtc_dd);
}
clk_prepare_enable(info->rtc_clk);
- info->rtc_src_clk = devm_clk_get(&pdev->dev, "rtc_src");
- if (IS_ERR(info->rtc_src_clk)) {
- dev_err(&pdev->dev, "failed to find rtc source clock\n");
- return PTR_ERR(info->rtc_src_clk);
+ if (info->data->needs_src_clk) {
+ info->rtc_src_clk = devm_clk_get(&pdev->dev, "rtc_src");
+ if (IS_ERR(info->rtc_src_clk)) {
+ dev_err(&pdev->dev,
+ "failed to find rtc source clock\n");
+ return PTR_ERR(info->rtc_src_clk);
+ }
+ clk_prepare_enable(info->rtc_src_clk);
}
- clk_prepare_enable(info->rtc_src_clk);
-
/* check to see if everything is setup correctly */
if (info->data->enable)
config HMC_DRV
def_tristate m
prompt "Support for file transfers from HMC drive CD/DVD-ROM"
- depends on 64BIT
+ depends on S390 && 64BIT
select CRC16
help
This option enables support for file transfers from a Hardware
struct virtio_ccw_device *vcdev = dev_get_drvdata(&cdev->dev);
int i;
struct virtqueue *vq;
- struct virtio_driver *drv;
if (!vcdev)
return;
adapter->ccw_device = ccw_device;
INIT_WORK(&adapter->stat_work, _zfcp_status_read_scheduler);
- INIT_WORK(&adapter->scan_work, zfcp_fc_scan_ports);
+ INIT_DELAYED_WORK(&adapter->scan_work, zfcp_fc_scan_ports);
INIT_WORK(&adapter->ns_up_work, zfcp_fc_sym_name_update);
+ adapter->next_port_scan = jiffies;
+
if (zfcp_qdio_setup(adapter))
goto failed;
{
struct ccw_device *cdev = adapter->ccw_device;
- cancel_work_sync(&adapter->scan_work);
+ cancel_delayed_work_sync(&adapter->scan_work);
cancel_work_sync(&adapter->stat_work);
cancel_work_sync(&adapter->ns_up_work);
zfcp_destroy_adapter_work_queue(adapter);
zfcp_erp_set_adapter_status(adapter, ZFCP_STATUS_COMMON_RUNNING);
zfcp_erp_adapter_reopen(adapter, ZFCP_STATUS_COMMON_ERP_FAILED,
tag);
+
+ /*
+ * We want to scan ports here, with some random backoff and without
+ * rate limit. Recovery has already scheduled a port scan for us,
+ * but with both random delay and rate limit. Nevertheless we get
+ * what we want here by flushing the scheduled work after sleeping
+ * an equivalent random time.
+ * Let the port scan random delay elapse first. If recovery finishes
+ * up to that point in time, that would be perfect for both recovery
+ * and port scan. If not, i.e. recovery takes ages, there was no
+ * point in waiting a random delay on top of the time consumed by
+ * recovery.
+ */
+ msleep(zfcp_fc_port_scan_backoff());
zfcp_erp_wait(adapter);
- flush_work(&adapter->scan_work); /* ok to call even if nothing queued */
+ flush_delayed_work(&adapter->scan_work);
zfcp_ccw_adapter_put(adapter);
adapter->req_no = 0;
zfcp_ccw_activate(cdev, 0, "ccsonl1");
- /* scan for remote ports
- either at the end of any successful adapter recovery
- or only after the adapter recovery for setting a device online */
+
+ /*
+ * We want to scan ports here, always, with some random delay and
+ * without rate limit - basically what zfcp_ccw_activate() has
+ * achieved for us. Not quite! That port scan depended on
+ * !no_auto_port_rescan. So let's cover the no_auto_port_rescan
+ * case here to make sure a port scan is done unconditionally.
+ * Since zfcp_ccw_activate() has waited the desired random time,
+ * we can immediately schedule and flush a port scan for the
+ * remaining cases.
+ */
zfcp_fc_inverse_conditional_port_scan(adapter);
- flush_work(&adapter->scan_work); /* ok to call even if nothing queued */
+ flush_delayed_work(&adapter->scan_work);
zfcp_ccw_adapter_put(adapter);
return 0;
}
struct fc_host_statistics *fc_stats;
struct fsf_qtcb_bottom_port *stats_reset_data;
unsigned long stats_reset;
- struct work_struct scan_work;
+ struct delayed_work scan_work;
struct work_struct ns_up_work;
struct service_level service_level;
struct workqueue_struct *work_queue;
struct device_dma_parameters dma_parms;
struct zfcp_fc_events events;
+ unsigned long next_port_scan;
};
struct zfcp_port {
return ZFCP_ERP_CONTINUES;
}
-static void zfcp_erp_port_strategy_clearstati(struct zfcp_port *port)
-{
- atomic_clear_mask(ZFCP_STATUS_COMMON_ACCESS_DENIED, &port->status);
-}
-
static int zfcp_erp_port_forced_strategy(struct zfcp_erp_action *erp_action)
{
struct zfcp_port *port = erp_action->port;
switch (erp_action->step) {
case ZFCP_ERP_STEP_UNINITIALIZED:
- zfcp_erp_port_strategy_clearstati(port);
if ((status & ZFCP_STATUS_PORT_PHYS_OPEN) &&
(status & ZFCP_STATUS_COMMON_OPEN))
return zfcp_erp_port_forced_strategy_close(erp_action);
switch (erp_action->step) {
case ZFCP_ERP_STEP_UNINITIALIZED:
- zfcp_erp_port_strategy_clearstati(port);
if (p_status & ZFCP_STATUS_COMMON_OPEN)
return zfcp_erp_port_strategy_close(erp_action);
break;
extern int zfcp_fc_exec_bsg_job(struct fc_bsg_job *);
extern int zfcp_fc_timeout_bsg_job(struct fc_bsg_job *);
extern void zfcp_fc_sym_name_update(struct work_struct *);
+extern unsigned int zfcp_fc_port_scan_backoff(void);
extern void zfcp_fc_conditional_port_scan(struct zfcp_adapter *);
extern void zfcp_fc_inverse_conditional_port_scan(struct zfcp_adapter *);
#include <linux/types.h>
#include <linux/slab.h>
#include <linux/utsname.h>
+#include <linux/random.h>
#include <scsi/fc/fc_els.h>
#include <scsi/libfc.h>
#include "zfcp_ext.h"
MODULE_PARM_DESC(no_auto_port_rescan,
"no automatic port_rescan (default off)");
+static unsigned int port_scan_backoff = 500;
+module_param(port_scan_backoff, uint, 0600);
+MODULE_PARM_DESC(port_scan_backoff,
+ "upper limit of port scan random backoff in msecs (default 500)");
+
+static unsigned int port_scan_ratelimit = 60000;
+module_param(port_scan_ratelimit, uint, 0600);
+MODULE_PARM_DESC(port_scan_ratelimit,
+ "minimum interval between port scans in msecs (default 60000)");
+
+unsigned int zfcp_fc_port_scan_backoff(void)
+{
+ if (!port_scan_backoff)
+ return 0;
+ return get_random_int() % port_scan_backoff;
+}
+
+static void zfcp_fc_port_scan_time(struct zfcp_adapter *adapter)
+{
+ unsigned long interval = msecs_to_jiffies(port_scan_ratelimit);
+ unsigned long backoff = msecs_to_jiffies(zfcp_fc_port_scan_backoff());
+
+ adapter->next_port_scan = jiffies + interval + backoff;
+}
+
+static void zfcp_fc_port_scan(struct zfcp_adapter *adapter)
+{
+ unsigned long now = jiffies;
+ unsigned long next = adapter->next_port_scan;
+ unsigned long delay = 0, max;
+
+ /* delay only needed within waiting period */
+ if (time_before(now, next)) {
+ delay = next - now;
+ /* paranoia: never ever delay scans longer than specified */
+ max = msecs_to_jiffies(port_scan_ratelimit + port_scan_backoff);
+ delay = min(delay, max);
+ }
+
+ queue_delayed_work(adapter->work_queue, &adapter->scan_work, delay);
+}
+
void zfcp_fc_conditional_port_scan(struct zfcp_adapter *adapter)
{
if (no_auto_port_rescan)
return;
- queue_work(adapter->work_queue, &adapter->scan_work);
+ zfcp_fc_port_scan(adapter);
}
void zfcp_fc_inverse_conditional_port_scan(struct zfcp_adapter *adapter)
if (!no_auto_port_rescan)
return;
- queue_work(adapter->work_queue, &adapter->scan_work);
+ zfcp_fc_port_scan(adapter);
}
/**
*/
void zfcp_fc_scan_ports(struct work_struct *work)
{
- struct zfcp_adapter *adapter = container_of(work, struct zfcp_adapter,
+ struct delayed_work *dw = to_delayed_work(work);
+ struct zfcp_adapter *adapter = container_of(dw, struct zfcp_adapter,
scan_work);
int ret, i;
struct zfcp_fc_req *fc_req;
int chain, max_entries, buf_num, max_bytes;
+ zfcp_fc_port_scan_time(adapter);
+
chain = adapter->adapter_features & FSF_FEATURE_ELS_CT_CHAINED_SBALS;
buf_num = chain ? ZFCP_FC_GPN_FT_NUM_BUFS : 1;
max_entries = chain ? ZFCP_FC_GPN_FT_MAX_ENT : ZFCP_FC_GPN_FT_ENT_PAGE;
void zfcp_fc_scsi_to_fcp(struct fcp_cmnd *fcp, struct scsi_cmnd *scsi,
u8 tm_flags)
{
- char tag[2];
-
int_to_scsilun(scsi->device->lun, (struct scsi_lun *) &fcp->fc_lun);
if (unlikely(tm_flags)) {
return;
}
- if (scsi_populate_tag_msg(scsi, tag)) {
- switch (tag[0]) {
- case MSG_ORDERED_TAG:
- fcp->fc_pri_ta |= FCP_PTA_ORDERED;
- break;
- case MSG_SIMPLE_TAG:
- fcp->fc_pri_ta |= FCP_PTA_SIMPLE;
- break;
- };
- } else
- fcp->fc_pri_ta = FCP_PTA_SIMPLE;
+ fcp->fc_pri_ta = FCP_PTA_SIMPLE;
if (scsi->sc_data_direction == DMA_FROM_DEVICE)
fcp->fc_flags |= FCP_CFL_RDDATA;
port->handle = header->port_handle;
atomic_set_mask(ZFCP_STATUS_COMMON_OPEN |
ZFCP_STATUS_PORT_PHYS_OPEN, &port->status);
- atomic_clear_mask(ZFCP_STATUS_COMMON_ACCESS_DENIED |
- ZFCP_STATUS_COMMON_ACCESS_BOXED,
+ atomic_clear_mask(ZFCP_STATUS_COMMON_ACCESS_BOXED,
&port->status);
/* check whether D_ID has changed during open */
/*
module_param(allow_lun_scan, bool, 0600);
MODULE_PARM_DESC(allow_lun_scan, "For NPIV, scan and attach all storage LUNs");
-static int zfcp_scsi_change_queue_depth(struct scsi_device *sdev, int depth,
- int reason)
-{
- switch (reason) {
- case SCSI_QDEPTH_DEFAULT:
- scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
- break;
- case SCSI_QDEPTH_QFULL:
- scsi_track_queue_full(sdev, depth);
- break;
- case SCSI_QDEPTH_RAMP_UP:
- scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
- break;
- default:
- return -EOPNOTSUPP;
- }
- return sdev->queue_depth;
-}
-
static void zfcp_scsi_slave_destroy(struct scsi_device *sdev)
{
struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev);
static int zfcp_scsi_slave_configure(struct scsi_device *sdp)
{
if (sdp->tagged_supported)
- scsi_adjust_queue_depth(sdp, MSG_SIMPLE_TAG, default_depth);
- else
- scsi_adjust_queue_depth(sdp, 0, 1);
+ scsi_change_queue_depth(sdp, default_depth);
return 0;
}
.slave_alloc = zfcp_scsi_slave_alloc,
.slave_configure = zfcp_scsi_slave_configure,
.slave_destroy = zfcp_scsi_slave_destroy,
- .change_queue_depth = zfcp_scsi_change_queue_depth,
+ .change_queue_depth = scsi_change_queue_depth,
.proc_name = "zfcp",
.can_queue = 4096,
.this_id = -1,
.use_clustering = 1,
.shost_attrs = zfcp_sysfs_shost_attrs,
.sdev_attrs = zfcp_sysfs_sdev_attrs,
+ .track_queue_depth = 1,
};
/**
ZFCP_DEFINE_ATTR(zfcp_port, port, in_recovery, "%d\n",
(atomic_read(&port->status) &
ZFCP_STATUS_COMMON_ERP_INUSE) != 0);
-ZFCP_DEFINE_ATTR(zfcp_port, port, access_denied, "%d\n",
- (atomic_read(&port->status) &
- ZFCP_STATUS_COMMON_ACCESS_DENIED) != 0);
+ZFCP_DEFINE_ATTR_CONST(port, access_denied, "%d\n", 0);
ZFCP_DEFINE_ATTR(zfcp_unit, unit, status, "0x%08x\n",
zfcp_unit_sdev_status(unit));
if (!adapter)
return -ENODEV;
- /* sync the user-space- with the kernel-invocation of scan_work */
- queue_work(adapter->work_queue, &adapter->scan_work);
- flush_work(&adapter->scan_work);
+ /*
+ * Users wish is our command: immediately schedule and flush a
+ * worker to conduct a synchronous port scan, that is, neither
+ * a random delay nor a rate limit is applied here.
+ */
+ queue_delayed_work(adapter->work_queue, &adapter->scan_work, 0);
+ flush_delayed_work(&adapter->scan_work);
zfcp_ccw_adapter_put(adapter);
return (ssize_t) count;
{ \
struct scsi_device *sdev = to_scsi_device(dev); \
struct zfcp_scsi_dev *zfcp_sdev = sdev_to_zfcp(sdev); \
- struct zfcp_port *port = zfcp_sdev->port; \
\
return sprintf(buf, _format, _value); \
} \
static DEVICE_ATTR(_name, S_IRUGO, zfcp_sysfs_scsi_##_name##_show, NULL);
ZFCP_DEFINE_SCSI_ATTR(hba_id, "%s\n",
- dev_name(&port->adapter->ccw_device->dev));
+ dev_name(&zfcp_sdev->port->adapter->ccw_device->dev));
ZFCP_DEFINE_SCSI_ATTR(wwpn, "0x%016llx\n",
- (unsigned long long) port->wwpn);
+ (unsigned long long) zfcp_sdev->port->wwpn);
static ssize_t zfcp_sysfs_scsi_fcp_lun_show(struct device *dev,
struct device_attribute *attr,
}
static DEVICE_ATTR(fcp_lun, S_IRUGO, zfcp_sysfs_scsi_fcp_lun_show, NULL);
+ZFCP_DEFINE_SCSI_ATTR(zfcp_access_denied, "%d\n",
+ (atomic_read(&zfcp_sdev->status) &
+ ZFCP_STATUS_COMMON_ACCESS_DENIED) != 0);
+
+static ssize_t zfcp_sysfs_scsi_zfcp_failed_show(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ unsigned int status = atomic_read(&sdev_to_zfcp(sdev)->status);
+ unsigned int failed = status & ZFCP_STATUS_COMMON_ERP_FAILED ? 1 : 0;
+
+ return sprintf(buf, "%d\n", failed);
+}
+
+static ssize_t zfcp_sysfs_scsi_zfcp_failed_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct scsi_device *sdev = to_scsi_device(dev);
+ unsigned long val;
+
+ if (kstrtoul(buf, 0, &val) || val != 0)
+ return -EINVAL;
+
+ zfcp_erp_set_lun_status(sdev, ZFCP_STATUS_COMMON_RUNNING);
+ zfcp_erp_lun_reopen(sdev, ZFCP_STATUS_COMMON_ERP_FAILED,
+ "syufai3");
+ zfcp_erp_wait(sdev_to_zfcp(sdev)->port->adapter);
+
+ return count;
+}
+static DEVICE_ATTR(zfcp_failed, S_IWUSR | S_IRUGO,
+ zfcp_sysfs_scsi_zfcp_failed_show,
+ zfcp_sysfs_scsi_zfcp_failed_store);
+
+ZFCP_DEFINE_SCSI_ATTR(zfcp_in_recovery, "%d\n",
+ (atomic_read(&zfcp_sdev->status) &
+ ZFCP_STATUS_COMMON_ERP_INUSE) != 0);
+
+ZFCP_DEFINE_SCSI_ATTR(zfcp_status, "0x%08x\n",
+ atomic_read(&zfcp_sdev->status));
+
struct device_attribute *zfcp_sysfs_sdev_attrs[] = {
&dev_attr_fcp_lun,
&dev_attr_wwpn,
&dev_attr_read_latency,
&dev_attr_write_latency,
&dev_attr_cmd_latency,
+ &dev_attr_zfcp_access_denied,
+ &dev_attr_zfcp_failed,
+ &dev_attr_zfcp_in_recovery,
+ &dev_attr_zfcp_status,
NULL
};
return len;
} /* End twa_show_stats() */
-/* This function will set a devices queue depth */
-static int twa_change_queue_depth(struct scsi_device *sdev, int queue_depth,
- int reason)
-{
- if (reason != SCSI_QDEPTH_DEFAULT)
- return -EOPNOTSUPP;
-
- if (queue_depth > TW_Q_LENGTH-2)
- queue_depth = TW_Q_LENGTH-2;
- scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, queue_depth);
- return queue_depth;
-} /* End twa_change_queue_depth() */
-
/* Create sysfs 'stats' entry */
static struct device_attribute twa_host_stats_attr = {
.attr = {
.queuecommand = twa_scsi_queue,
.eh_host_reset_handler = twa_scsi_eh_reset,
.bios_param = twa_scsi_biosparam,
- .change_queue_depth = twa_change_queue_depth,
+ .change_queue_depth = scsi_change_queue_depth,
.can_queue = TW_Q_LENGTH-2,
.slave_configure = twa_slave_configure,
.this_id = -1,
return len;
} /* End twl_show_stats() */
-/* This function will set a devices queue depth */
-static int twl_change_queue_depth(struct scsi_device *sdev, int queue_depth,
- int reason)
-{
- if (reason != SCSI_QDEPTH_DEFAULT)
- return -EOPNOTSUPP;
-
- if (queue_depth > TW_Q_LENGTH-2)
- queue_depth = TW_Q_LENGTH-2;
- scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, queue_depth);
- return queue_depth;
-} /* End twl_change_queue_depth() */
-
/* stats sysfs attribute initializer */
static struct device_attribute twl_host_stats_attr = {
.attr = {
.queuecommand = twl_scsi_queue,
.eh_host_reset_handler = twl_scsi_eh_reset,
.bios_param = twl_scsi_biosparam,
- .change_queue_depth = twl_change_queue_depth,
+ .change_queue_depth = scsi_change_queue_depth,
.can_queue = TW_Q_LENGTH-2,
.slave_configure = twl_slave_configure,
.this_id = -1,
return len;
} /* End tw_show_stats() */
-/* This function will set a devices queue depth */
-static int tw_change_queue_depth(struct scsi_device *sdev, int queue_depth,
- int reason)
-{
- if (reason != SCSI_QDEPTH_DEFAULT)
- return -EOPNOTSUPP;
-
- if (queue_depth > TW_Q_LENGTH-2)
- queue_depth = TW_Q_LENGTH-2;
- scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, queue_depth);
- return queue_depth;
-} /* End tw_change_queue_depth() */
-
/* Create sysfs 'stats' entry */
static struct device_attribute tw_host_stats_attr = {
.attr = {
.queuecommand = tw_scsi_queue,
.eh_host_reset_handler = tw_scsi_eh_reset,
.bios_param = tw_scsi_biosparam,
- .change_queue_depth = tw_change_queue_depth,
+ .change_queue_depth = scsi_change_queue_depth,
.can_queue = TW_Q_LENGTH-2,
.slave_configure = tw_slave_configure,
.this_id = -1,
STATIC int NCR_700_slave_alloc(struct scsi_device *SDpnt);
STATIC int NCR_700_slave_configure(struct scsi_device *SDpnt);
STATIC void NCR_700_slave_destroy(struct scsi_device *SDpnt);
-static int NCR_700_change_queue_depth(struct scsi_device *SDpnt, int depth, int reason);
+static int NCR_700_change_queue_depth(struct scsi_device *SDpnt, int depth);
static int NCR_700_change_queue_type(struct scsi_device *SDpnt, int depth);
STATIC struct device_attribute *NCR_700_dev_attrs[];
tpnt->slave_alloc = NCR_700_slave_alloc;
tpnt->change_queue_depth = NCR_700_change_queue_depth;
tpnt->change_queue_type = NCR_700_change_queue_type;
+ tpnt->use_blk_tags = 1;
if(tpnt->name == NULL)
tpnt->name = "53c700";
hostdata->cmd = NULL;
if(SCp != NULL) {
- struct NCR_700_command_slot *slot =
+ struct NCR_700_command_slot *slot =
(struct NCR_700_command_slot *)SCp->host_scribble;
-
+
dma_unmap_single(hostdata->dev, slot->pCmd,
MAX_COMMAND_SIZE, DMA_TO_DEVICE);
if (slot->flags == NCR_700_FLAG_AUTOSENSE) {
char *cmnd = NCR_700_get_sense_cmnd(SCp->device);
-#ifdef NCR_700_DEBUG
- printk(" ORIGINAL CMD %p RETURNED %d, new return is %d sense is\n",
- SCp, SCp->cmnd[7], result);
- scsi_print_sense("53c700", SCp);
-#endif
dma_unmap_single(hostdata->dev, slot->dma_handle,
SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE);
/* restore the old result if the request sense was
/* we're done negotiating */
NCR_700_set_tag_neg_state(SCp->device, NCR_700_FINISHED_TAG_NEGOTIATION);
hostdata->tag_negotiated &= ~(1<<scmd_id(SCp));
+
SCp->device->tagged_supported = 0;
- scsi_deactivate_tcq(SCp->device, host->cmd_per_lun);
+ scsi_change_queue_depth(SCp->device, host->cmd_per_lun);
+ scsi_set_tag_type(SCp->device, 0);
} else {
shost_printk(KERN_WARNING, host,
"(%d:%d) Unexpected REJECT Message %s\n",
if((hostdata->tag_negotiated & (1<<scmd_id(SCp)))
&& (slot->tag != SCSI_NO_TAG && SCp->cmnd[0] != REQUEST_SENSE &&
slot->flags != NCR_700_FLAG_AUTOSENSE)) {
- count += scsi_populate_tag_msg(SCp, &hostdata->msgout[count]);
+ count += spi_populate_tag_msg(&hostdata->msgout[count], SCp);
}
if(hostdata->fast &&
*/
if(NCR_700_get_depth(SCp->device) != 0
&& (!(hostdata->tag_negotiated & (1<<scmd_id(SCp)))
- || !blk_rq_tagged(SCp->request))) {
+ || !(SCp->flags & SCMD_TAGGED))) {
CDEBUG(KERN_ERR, SCp, "has non zero depth %d\n",
NCR_700_get_depth(SCp->device));
return SCSI_MLQUEUE_DEVICE_BUSY;
printk("53c700: scsi%d, command ", SCp->device->host->host_no);
scsi_print_command(SCp);
#endif
- if(blk_rq_tagged(SCp->request)
+ if ((SCp->flags & SCMD_TAGGED)
&& (hostdata->tag_negotiated &(1<<scmd_id(SCp))) == 0
&& NCR_700_get_tag_neg_state(SCp->device) == NCR_700_START_TAG_NEGOTIATION) {
scmd_printk(KERN_ERR, SCp, "Enabling Tag Command Queuing\n");
*
* FIXME: This will royally screw up on multiple LUN devices
* */
- if(!blk_rq_tagged(SCp->request)
+ if (!(SCp->flags & SCMD_TAGGED)
&& (hostdata->tag_negotiated &(1<<scmd_id(SCp)))) {
scmd_printk(KERN_INFO, SCp, "Disabling Tag Command Queuing\n");
hostdata->tag_negotiated &= ~(1<<scmd_id(SCp));
{
struct NCR_700_command_slot *slot;
- scmd_printk(KERN_INFO, SCp,
- "New error handler wants to abort command\n\t");
- scsi_print_command(SCp);
+ scmd_printk(KERN_INFO, SCp, "abort command\n");
slot = (struct NCR_700_command_slot *)SCp->host_scribble;
/* to do here: allocate memory; build a queue_full list */
if(SDp->tagged_supported) {
- scsi_set_tag_type(SDp, MSG_ORDERED_TAG);
- scsi_activate_tcq(SDp, NCR_700_DEFAULT_TAGS);
+ scsi_change_queue_depth(SDp, NCR_700_DEFAULT_TAGS);
NCR_700_set_tag_neg_state(SDp, NCR_700_START_TAG_NEGOTIATION);
- } else {
- /* initialise to default depth */
- scsi_adjust_queue_depth(SDp, 0, SDp->host->cmd_per_lun);
}
+
if(hostdata->fast) {
/* Find the correct offset and period via domain validation */
if (!spi_initial_dv(SDp->sdev_target))
}
static int
-NCR_700_change_queue_depth(struct scsi_device *SDp, int depth, int reason)
+NCR_700_change_queue_depth(struct scsi_device *SDp, int depth)
{
- if (reason != SCSI_QDEPTH_DEFAULT)
- return -EOPNOTSUPP;
-
if (depth > NCR_700_MAX_TAGS)
depth = NCR_700_MAX_TAGS;
-
- scsi_adjust_queue_depth(SDp, scsi_get_tag_type(SDp), depth);
- return depth;
+ return scsi_change_queue_depth(SDp, depth);
}
static int NCR_700_change_queue_type(struct scsi_device *SDp, int tag_type)
struct NCR_700_Host_Parameters *hostdata =
(struct NCR_700_Host_Parameters *)SDp->host->hostdata[0];
- scsi_set_tag_type(SDp, tag_type);
-
/* We have a global (per target) flag to track whether TCQ is
* enabled, so we'll be turning it off for the entire target here.
* our tag algorithm will fail if we mix tagged and untagged commands,
if (change_tag)
scsi_target_quiesce(SDp->sdev_target);
+ scsi_set_tag_type(SDp, tag_type);
if (!tag_type) {
/* shift back to the default unqueued number of commands
* (the user can still raise this) */
- scsi_deactivate_tcq(SDp, SDp->host->cmd_per_lun);
+ scsi_change_queue_depth(SDp, SDp->host->cmd_per_lun);
hostdata->tag_negotiated &= ~(1 << sdev_id(SDp));
} else {
/* Here, we cleared the negotiation flag above, so this
* will force the driver to renegotiate */
- scsi_activate_tcq(SDp, SDp->queue_depth);
+ scsi_change_queue_depth(SDp, SDp->queue_depth);
if (change_tag)
NCR_700_set_tag_neg_state(SDp, NCR_700_START_TAG_NEGOTIATION);
}
if (qdepth == 0)
qdepth = BLOGIC_MAX_AUTO_TAG_DEPTH;
adapter->qdepth[tgt_id] = qdepth;
- scsi_adjust_queue_depth(dev, MSG_SIMPLE_TAG, qdepth);
+ scsi_change_queue_depth(dev, qdepth);
} else {
adapter->tagq_ok &= ~(1 << tgt_id);
qdepth = adapter->untag_qdepth;
adapter->qdepth[tgt_id] = qdepth;
- scsi_adjust_queue_depth(dev, 0, qdepth);
+ scsi_change_queue_depth(dev, qdepth);
}
qdepth = 0;
for (tgt_id = 0; tgt_id < adapter->maxdev; tgt_id++)
To compile this driver as a module, choose M here: the
module will be called dc395x.
-config SCSI_DC390T
- tristate "Tekram DC390(T) and Am53/79C974 SCSI support"
+config SCSI_AM53C974
+ tristate "Tekram DC390(T) and Am53/79C974 SCSI support (new driver)"
depends on PCI && SCSI
+ select SCSI_SPI_ATTRS
---help---
This driver supports PCI SCSI host adapters based on the Am53C974A
chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard
PCscsi/PCnet (Am53/79C974) solutions.
+ This is a new implementation base on the generic esp_scsi driver.
Documentation can be found in <file:Documentation/scsi/tmscsim.txt>.
based on NCR/Symbios chips. Use "NCR53C8XX SCSI support" for those.
To compile this driver as a module, choose M here: the
- module will be called tmscsim.
+ module will be called am53c974.
config SCSI_T128
tristate "Trantor T128/T128F/T228 SCSI support"
To compile this driver as a module, choose M here: the
module will be called nsp32.
+config SCSI_WD719X
+ tristate "Western Digital WD7193/7197/7296 support"
+ depends on PCI && SCSI
+ select EEPROM_93CX6
+ ---help---
+ This is a driver for Western Digital WD7193, WD7197 and WD7296 PCI
+ SCSI controllers (based on WD33C296A chip).
+
config SCSI_DEBUG
tristate "SCSI debugging host simulator"
depends on SCSI
that leave the devices with SCSI operations partway completed.
config MAC_SCSI
- bool "Macintosh NCR5380 SCSI"
+ tristate "Macintosh NCR5380 SCSI"
depends on MAC && SCSI=y
select SCSI_SPI_ATTRS
help
obj-$(CONFIG_SCSI_7000FASST) += wd7000.o
obj-$(CONFIG_SCSI_EATA) += eata.o
obj-$(CONFIG_SCSI_DC395x) += dc395x.o
-obj-$(CONFIG_SCSI_DC390T) += tmscsim.o
+obj-$(CONFIG_SCSI_AM53C974) += esp_scsi.o am53c974.o
obj-$(CONFIG_MEGARAID_LEGACY) += megaraid.o
obj-$(CONFIG_MEGARAID_NEWGEN) += megaraid/
obj-$(CONFIG_MEGARAID_SAS) += megaraid/
obj-$(CONFIG_VMWARE_PVSCSI) += vmw_pvscsi.o
obj-$(CONFIG_XEN_SCSI_FRONTEND) += xen-scsifront.o
obj-$(CONFIG_HYPERV_STORAGE) += hv_storvsc.o
+obj-$(CONFIG_SCSI_WD719X) += wd719x.o
obj-$(CONFIG_ARM) += arm/
* drew@colorado.edu
* +1 (303) 666-5836
*
- * DISTRIBUTION RELEASE 6.
- *
* For more information, please consult
*
* NCR 5380 Family
* Set up the internal fields in the SCSI command.
*/
-static __inline__ void initialize_SCp(Scsi_Cmnd * cmd)
+static inline void initialize_SCp(struct scsi_cmnd *cmd)
{
/*
* Initialize the Scsi Pointer field so that all of the commands in the
int trying_irqs, i, mask;
NCR5380_setup(instance);
- for (trying_irqs = i = 0, mask = 1; i < 16; ++i, mask <<= 1)
+ for (trying_irqs = 0, i = 1, mask = 2; i < 16; ++i, mask <<= 1)
if ((mask & possible) && (request_irq(i, &probe_intr, 0, "NCR-probe", NULL) == 0))
trying_irqs |= mask;
timeout = jiffies + (250 * HZ / 1000);
- probe_irq = SCSI_IRQ_NONE;
+ probe_irq = NO_IRQ;
/*
* A interrupt is triggered whenever BSY = false, SEL = true
NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_DATA | ICR_ASSERT_SEL);
- while (probe_irq == SCSI_IRQ_NONE && time_before(jiffies, timeout))
+ while (probe_irq == NO_IRQ && time_before(jiffies, timeout))
schedule_timeout_uninterruptible(1);
NCR5380_write(SELECT_ENABLE_REG, 0);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- for (i = 0, mask = 1; i < 16; ++i, mask <<= 1)
+ for (i = 1, mask = 2; i < 16; ++i, mask <<= 1)
if (trying_irqs & mask)
free_irq(i, NULL);
}
/**
- * NCR58380_print_options - show options
- * @instance: unused for now
+ * NCR58380_info - report driver and host information
+ * @instance: relevant scsi host instance
*
- * Called by probe code indicating the NCR5380 driver options that
- * were selected. At some point this will switch to runtime options
- * read from the adapter in question
+ * For use as the host template info() handler.
*
* Locks: none
*/
-static void __init __maybe_unused
-NCR5380_print_options(struct Scsi_Host *instance)
+static const char *NCR5380_info(struct Scsi_Host *instance)
{
- printk(" generic options"
-#ifdef AUTOPROBE_IRQ
- " AUTOPROBE_IRQ"
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+ return hostdata->info;
+}
+
+static void prepare_info(struct Scsi_Host *instance)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+ snprintf(hostdata->info, sizeof(hostdata->info),
+ "%s, io_port 0x%lx, n_io_port %d, "
+ "base 0x%lx, irq %d, "
+ "can_queue %d, cmd_per_lun %d, "
+ "sg_tablesize %d, this_id %d, "
+ "flags { %s%s%s}, "
+#if defined(USLEEP_POLL) && defined(USLEEP_WAITLONG)
+ "USLEEP_POLL %d, USLEEP_WAITLONG %d, "
#endif
-#ifdef AUTOSENSE
- " AUTOSENSE"
+ "options { %s} ",
+ instance->hostt->name, instance->io_port, instance->n_io_port,
+ instance->base, instance->irq,
+ instance->can_queue, instance->cmd_per_lun,
+ instance->sg_tablesize, instance->this_id,
+ hostdata->flags & FLAG_NCR53C400 ? "NCR53C400 " : "",
+ hostdata->flags & FLAG_DTC3181E ? "DTC3181E " : "",
+ hostdata->flags & FLAG_NO_PSEUDO_DMA ? "NO_PSEUDO_DMA " : "",
+#if defined(USLEEP_POLL) && defined(USLEEP_WAITLONG)
+ USLEEP_POLL, USLEEP_WAITLONG,
+#endif
+#ifdef AUTOPROBE_IRQ
+ "AUTOPROBE_IRQ "
#endif
#ifdef DIFFERENTIAL
- " DIFFERENTIAL"
+ "DIFFERENTIAL "
#endif
#ifdef REAL_DMA
- " REAL DMA"
+ "REAL_DMA "
#endif
#ifdef REAL_DMA_POLL
- " REAL DMA POLL"
+ "REAL_DMA_POLL "
#endif
#ifdef PARITY
- " PARITY"
+ "PARITY "
#endif
#ifdef PSEUDO_DMA
- " PSEUDO DMA"
+ "PSEUDO_DMA "
#endif
#ifdef UNSAFE
- " UNSAFE "
+ "UNSAFE "
#endif
- );
- printk(" USLEEP, USLEEP_POLL=%d USLEEP_SLEEP=%d", USLEEP_POLL, USLEEP_SLEEP);
- printk(" generic release=%d", NCR5380_PUBLIC_RELEASE);
- if (((struct NCR5380_hostdata *) instance->hostdata)->flags & FLAG_NCR53C400) {
- printk(" ncr53c400 release=%d", NCR53C400_PUBLIC_RELEASE);
- }
+#ifdef NCR53C400
+ "NCR53C400 "
+#endif
+ "");
}
/**
NCR5380_dprint_phase(NDEBUG_ANY, instance);
}
+#ifdef PSEUDO_DMA
/******************************************/
/*
* /proc/scsi/[dtc pas16 t128 generic]/[0-ASC_NUM_BOARD_SUPPORTED]
static int __maybe_unused NCR5380_write_info(struct Scsi_Host *instance,
char *buffer, int length)
{
-#ifdef DTC_PUBLIC_RELEASE
- dtc_wmaxi = dtc_maxi = 0;
-#endif
-#ifdef PAS16_PUBLIC_RELEASE
- pas_wmaxi = pas_maxi = 0;
-#endif
- return (-ENOSYS); /* Currently this is a no-op */
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+ hostdata->spin_max_r = 0;
+ hostdata->spin_max_w = 0;
+ return 0;
}
+#endif
#undef SPRINTF
#define SPRINTF(args...) seq_printf(m, ## args)
static
-void lprint_Scsi_Cmnd(Scsi_Cmnd * cmd, struct seq_file *m);
+void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m);
static
void lprint_command(unsigned char *cmd, struct seq_file *m);
static
struct Scsi_Host *instance)
{
struct NCR5380_hostdata *hostdata;
- Scsi_Cmnd *ptr;
+ struct scsi_cmnd *ptr;
hostdata = (struct NCR5380_hostdata *) instance->hostdata;
- SPRINTF("NCR5380 core release=%d. ", NCR5380_PUBLIC_RELEASE);
- if (((struct NCR5380_hostdata *) instance->hostdata)->flags & FLAG_NCR53C400)
- SPRINTF("ncr53c400 release=%d. ", NCR53C400_PUBLIC_RELEASE);
-#ifdef DTC_PUBLIC_RELEASE
- SPRINTF("DTC 3180/3280 release %d", DTC_PUBLIC_RELEASE);
-#endif
-#ifdef T128_PUBLIC_RELEASE
- SPRINTF("T128 release %d", T128_PUBLIC_RELEASE);
-#endif
-#ifdef GENERIC_NCR5380_PUBLIC_RELEASE
- SPRINTF("Generic5380 release %d", GENERIC_NCR5380_PUBLIC_RELEASE);
-#endif
-#ifdef PAS16_PUBLIC_RELEASE
- SPRINTF("PAS16 release=%d", PAS16_PUBLIC_RELEASE);
-#endif
-
- SPRINTF("\nBase Addr: 0x%05lX ", (long) instance->base);
- SPRINTF("io_port: %04x ", (int) instance->io_port);
- if (instance->irq == SCSI_IRQ_NONE)
- SPRINTF("IRQ: None.\n");
- else
- SPRINTF("IRQ: %d.\n", instance->irq);
-
-#ifdef DTC_PUBLIC_RELEASE
- SPRINTF("Highwater I/O busy_spin_counts -- write: %d read: %d\n", dtc_wmaxi, dtc_maxi);
-#endif
-#ifdef PAS16_PUBLIC_RELEASE
- SPRINTF("Highwater I/O busy_spin_counts -- write: %d read: %d\n", pas_wmaxi, pas_maxi);
+#ifdef PSEUDO_DMA
+ SPRINTF("Highwater I/O busy spin counts: write %d, read %d\n",
+ hostdata->spin_max_w, hostdata->spin_max_r);
#endif
spin_lock_irq(instance->host_lock);
if (!hostdata->connected)
SPRINTF("scsi%d: no currently connected command\n", instance->host_no);
else
- lprint_Scsi_Cmnd((Scsi_Cmnd *) hostdata->connected, m);
+ lprint_Scsi_Cmnd((struct scsi_cmnd *) hostdata->connected, m);
SPRINTF("scsi%d: issue_queue\n", instance->host_no);
- for (ptr = (Scsi_Cmnd *) hostdata->issue_queue; ptr; ptr = (Scsi_Cmnd *) ptr->host_scribble)
+ for (ptr = (struct scsi_cmnd *) hostdata->issue_queue; ptr; ptr = (struct scsi_cmnd *) ptr->host_scribble)
lprint_Scsi_Cmnd(ptr, m);
SPRINTF("scsi%d: disconnected_queue\n", instance->host_no);
- for (ptr = (Scsi_Cmnd *) hostdata->disconnected_queue; ptr; ptr = (Scsi_Cmnd *) ptr->host_scribble)
+ for (ptr = (struct scsi_cmnd *) hostdata->disconnected_queue; ptr; ptr = (struct scsi_cmnd *) ptr->host_scribble)
lprint_Scsi_Cmnd(ptr, m);
spin_unlock_irq(instance->host_lock);
return 0;
}
-static void lprint_Scsi_Cmnd(Scsi_Cmnd * cmd, struct seq_file *m)
+static void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m)
{
SPRINTF("scsi%d : destination target %d, lun %llu\n", cmd->device->host->host_no, cmd->device->id, cmd->device->lun);
SPRINTF(" command = ");
INIT_DELAYED_WORK(&hostdata->coroutine, NCR5380_main);
-#ifdef NCR5380_STATS
- for (i = 0; i < 8; ++i) {
- hostdata->time_read[i] = 0;
- hostdata->time_write[i] = 0;
- hostdata->bytes_read[i] = 0;
- hostdata->bytes_write[i] = 0;
- }
- hostdata->timebase = 0;
- hostdata->pendingw = 0;
- hostdata->pendingr = 0;
-#endif
-
/* The CHECK code seems to break the 53C400. Will check it later maybe */
if (flags & FLAG_NCR53C400)
hostdata->flags = FLAG_HAS_LAST_BYTE_SENT | flags;
hostdata->host = instance;
hostdata->time_expires = 0;
-#ifndef AUTOSENSE
- if ((instance->cmd_per_lun > 1) || instance->can_queue > 1)
- printk(KERN_WARNING "scsi%d : WARNING : support for multiple outstanding commands enabled\n" " without AUTOSENSE option, contingent allegiance conditions may\n"
- " be incorrectly cleared.\n", instance->host_no);
-#endif /* def AUTOSENSE */
+ prepare_info(instance);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_write(MODE_REG, MR_BASE);
* Locks: host lock taken by caller
*/
-static int NCR5380_queue_command_lck(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
+static int NCR5380_queue_command_lck(struct scsi_cmnd *cmd, void (*done) (struct scsi_cmnd *))
{
struct Scsi_Host *instance = cmd->device->host;
struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
- Scsi_Cmnd *tmp;
+ struct scsi_cmnd *tmp;
#if (NDEBUG & NDEBUG_NO_WRITE)
switch (cmd->cmnd[0]) {
}
#endif /* (NDEBUG & NDEBUG_NO_WRITE) */
-#ifdef NCR5380_STATS
- switch (cmd->cmnd[0]) {
- case WRITE:
- case WRITE_6:
- case WRITE_10:
- hostdata->time_write[cmd->device->id] -= (jiffies - hostdata->timebase);
- hostdata->bytes_write[cmd->device->id] += scsi_bufflen(cmd);
- hostdata->pendingw++;
- break;
- case READ:
- case READ_6:
- case READ_10:
- hostdata->time_read[cmd->device->id] -= (jiffies - hostdata->timebase);
- hostdata->bytes_read[cmd->device->id] += scsi_bufflen(cmd);
- hostdata->pendingr++;
- break;
- }
-#endif
-
/*
* We use the host_scribble field as a pointer to the next command
* in a queue
cmd->host_scribble = (unsigned char *) hostdata->issue_queue;
hostdata->issue_queue = cmd;
} else {
- for (tmp = (Scsi_Cmnd *) hostdata->issue_queue; tmp->host_scribble; tmp = (Scsi_Cmnd *) tmp->host_scribble);
+ for (tmp = (struct scsi_cmnd *) hostdata->issue_queue; tmp->host_scribble; tmp = (struct scsi_cmnd *) tmp->host_scribble);
LIST(cmd, tmp);
tmp->host_scribble = (unsigned char *) cmd;
}
struct NCR5380_hostdata *hostdata =
container_of(work, struct NCR5380_hostdata, coroutine.work);
struct Scsi_Host *instance = hostdata->host;
- Scsi_Cmnd *tmp, *prev;
+ struct scsi_cmnd *tmp, *prev;
int done;
spin_lock_irq(instance->host_lock);
* Search through the issue_queue for a command destined
* for a target that's not busy.
*/
- for (tmp = (Scsi_Cmnd *) hostdata->issue_queue, prev = NULL; tmp; prev = tmp, tmp = (Scsi_Cmnd *) tmp->host_scribble)
+ for (tmp = (struct scsi_cmnd *) hostdata->issue_queue, prev = NULL; tmp; prev = tmp, tmp = (struct scsi_cmnd *) tmp->host_scribble)
{
if (prev != tmp)
dprintk(NDEBUG_LISTS, "MAIN tmp=%p target=%d busy=%d lun=%llu\n", tmp, tmp->device->id, hostdata->busy[tmp->device->id], tmp->device->lun);
prev->host_scribble = tmp->host_scribble;
} else {
REMOVE(-1, hostdata->issue_queue, tmp, tmp->host_scribble);
- hostdata->issue_queue = (Scsi_Cmnd *) tmp->host_scribble;
+ hostdata->issue_queue = (struct scsi_cmnd *) tmp->host_scribble;
}
tmp->host_scribble = NULL;
hostdata->selecting = NULL;
/* RvC: have to preset this to indicate a new command is being performed */
- if (!NCR5380_select(instance, tmp,
- /*
- * REQUEST SENSE commands are issued without tagged
- * queueing, even on SCSI-II devices because the
- * contingent allegiance condition exists for the
- * entire unit.
- */
- (tmp->cmnd[0] == REQUEST_SENSE) ? TAG_NONE : TAG_NEXT)) {
+ /*
+ * REQUEST SENSE commands are issued without tagged
+ * queueing, even on SCSI-II devices because the
+ * contingent allegiance condition exists for the
+ * entire unit.
+ */
+
+ if (!NCR5380_select(instance, tmp)) {
break;
} else {
LIST(tmp, hostdata->issue_queue);
/* exited locked */
} /* if (!hostdata->connected) */
if (hostdata->selecting) {
- tmp = (Scsi_Cmnd *) hostdata->selecting;
+ tmp = (struct scsi_cmnd *) hostdata->selecting;
/* Selection will drop and retake the lock */
- if (!NCR5380_select(instance, tmp, (tmp->cmnd[0] == REQUEST_SENSE) ? TAG_NONE : TAG_NEXT)) {
+ if (!NCR5380_select(instance, tmp)) {
/* Ok ?? */
} else {
/* RvC: device failed, so we wait a long time
#endif
-/**
- * collect_stats - collect stats on a scsi command
- * @hostdata: adapter
- * @cmd: command being issued
- *
- * Update the statistical data by parsing the command in question
- */
-
-static void collect_stats(struct NCR5380_hostdata *hostdata, Scsi_Cmnd * cmd)
-{
-#ifdef NCR5380_STATS
- switch (cmd->cmnd[0]) {
- case WRITE:
- case WRITE_6:
- case WRITE_10:
- hostdata->time_write[scmd_id(cmd)] += (jiffies - hostdata->timebase);
- hostdata->pendingw--;
- break;
- case READ:
- case READ_6:
- case READ_10:
- hostdata->time_read[scmd_id(cmd)] += (jiffies - hostdata->timebase);
- hostdata->pendingr--;
- break;
- }
-#endif
-}
-
-
/*
- * Function : int NCR5380_select (struct Scsi_Host *instance, Scsi_Cmnd *cmd,
- * int tag);
+ * Function : int NCR5380_select(struct Scsi_Host *instance,
+ * struct scsi_cmnd *cmd)
*
* Purpose : establishes I_T_L or I_T_L_Q nexus for new or existing command,
* including ARBITRATION, SELECTION, and initial message out for
* IDENTIFY and queue messages.
*
* Inputs : instance - instantiation of the 5380 driver on which this
- * target lives, cmd - SCSI command to execute, tag - set to TAG_NEXT for
- * new tag, TAG_NONE for untagged queueing, otherwise set to the tag for
- * the command that is presently connected.
+ * target lives, cmd - SCSI command to execute.
*
* Returns : -1 if selection could not execute for some reason,
* 0 if selection succeeded or failed because the target
* Locks: caller holds hostdata lock in IRQ mode
*/
-static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd * cmd, int tag)
+static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
{
NCR5380_local_declare();
struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
return -1;
}
cmd->result = DID_BAD_TARGET << 16;
- collect_stats(hostdata, cmd);
cmd->scsi_done(cmd);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
dprintk(NDEBUG_SELECTION, "scsi%d : target did not respond within 250ms\n", instance->host_no);
}
dprintk(NDEBUG_SELECTION, "scsi%d : target %d selected, going into MESSAGE OUT phase.\n", instance->host_no, cmd->device->id);
- tmp[0] = IDENTIFY(((instance->irq == SCSI_IRQ_NONE) ? 0 : 1), cmd->device->lun);
+ tmp[0] = IDENTIFY(((instance->irq == NO_IRQ) ? 0 : 1), cmd->device->lun);
len = 1;
cmd->tag = 0;
#endif
unsigned char *data;
unsigned char phase, tmp, extended_msg[10], old_phase = 0xff;
- Scsi_Cmnd *cmd = (Scsi_Cmnd *) hostdata->connected;
+ struct scsi_cmnd *cmd = (struct scsi_cmnd *) hostdata->connected;
/* RvC: we need to set the end of the polling time */
unsigned long poll_time = jiffies + USLEEP_POLL;
cmd->next_link->tag = cmd->tag;
cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8);
dprintk(NDEBUG_LINKED, "scsi%d : target %d lun %llu linked request done, calling scsi_done().\n", instance->host_no, cmd->device->id, cmd->device->lun);
- collect_stats(hostdata, cmd);
cmd->scsi_done(cmd);
cmd = hostdata->connected;
break;
else if (status_byte(cmd->SCp.Status) != GOOD)
cmd->result = (cmd->result & 0x00ffff) | (DID_ERROR << 16);
-#ifdef AUTOSENSE
if ((cmd->cmnd[0] == REQUEST_SENSE) &&
hostdata->ses.cmd_len) {
scsi_eh_restore_cmnd(cmd, &hostdata->ses);
LIST(cmd, hostdata->issue_queue);
cmd->host_scribble = (unsigned char *)
hostdata->issue_queue;
- hostdata->issue_queue = (Scsi_Cmnd *) cmd;
+ hostdata->issue_queue = (struct scsi_cmnd *) cmd;
dprintk(NDEBUG_QUEUES, "scsi%d : REQUEST SENSE added to head of issue queue\n", instance->host_no);
- } else
-#endif /* def AUTOSENSE */
- {
- collect_stats(hostdata, cmd);
+ } else {
cmd->scsi_done(cmd);
}
hostdata->busy[cmd->device->id] &= ~(1 << (cmd->device->lun & 0xFF));
hostdata->connected = NULL;
cmd->result = DID_ERROR << 16;
- collect_stats(hostdata, cmd);
cmd->scsi_done(cmd);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
return;
* Function : void NCR5380_reselect (struct Scsi_Host *instance)
*
* Purpose : does reselection, initializing the instance->connected
- * field to point to the Scsi_Cmnd for which the I_T_L or I_T_L_Q
+ * field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q
* nexus has been reestablished,
*
* Inputs : instance - this instance of the NCR5380.
int len;
unsigned char msg[3];
unsigned char *data;
- Scsi_Cmnd *tmp = NULL, *prev;
+ struct scsi_cmnd *tmp = NULL, *prev;
int abort = 0;
NCR5380_setup(instance);
*/
- for (tmp = (Scsi_Cmnd *) hostdata->disconnected_queue, prev = NULL; tmp; prev = tmp, tmp = (Scsi_Cmnd *) tmp->host_scribble)
+ for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue, prev = NULL; tmp; prev = tmp, tmp = (struct scsi_cmnd *) tmp->host_scribble)
if ((target_mask == (1 << tmp->device->id)) && (lun == (u8)tmp->device->lun)
) {
if (prev) {
prev->host_scribble = tmp->host_scribble;
} else {
REMOVE(-1, hostdata->disconnected_queue, tmp, tmp->host_scribble);
- hostdata->disconnected_queue = (Scsi_Cmnd *) tmp->host_scribble;
+ hostdata->disconnected_queue = (struct scsi_cmnd *) tmp->host_scribble;
}
tmp->host_scribble = NULL;
break;
*
* Inputs : instance - this instance of the NCR5380.
*
- * Returns : pointer to the Scsi_Cmnd structure for which the I_T_L
+ * Returns : pointer to the scsi_cmnd structure for which the I_T_L
* nexus has been reestablished, on failure NULL is returned.
*/
#endif /* def REAL_DMA */
/*
- * Function : int NCR5380_abort (Scsi_Cmnd *cmd)
+ * Function : int NCR5380_abort (struct scsi_cmnd *cmd)
*
* Purpose : abort a command
*
- * Inputs : cmd - the Scsi_Cmnd to abort, code - code to set the
- * host byte of the result field to, if zero DID_ABORTED is
+ * Inputs : cmd - the scsi_cmnd to abort, code - code to set the
+ * host byte of the result field to, if zero DID_ABORTED is
* used.
*
- * Returns : 0 - success, -1 on failure.
+ * Returns : SUCCESS - success, FAILED on failure.
*
- * XXX - there is no way to abort the command that is currently
- * connected, you have to wait for it to complete. If this is
+ * XXX - there is no way to abort the command that is currently
+ * connected, you have to wait for it to complete. If this is
* a problem, we could implement longjmp() / setjmp(), setjmp()
* called where the loop started in NCR5380_main().
*
* Locks: host lock taken by caller
*/
-static int NCR5380_abort(Scsi_Cmnd * cmd) {
+static int NCR5380_abort(struct scsi_cmnd *cmd)
+{
NCR5380_local_declare();
struct Scsi_Host *instance = cmd->device->host;
struct NCR5380_hostdata *hostdata = (struct NCR5380_hostdata *) instance->hostdata;
- Scsi_Cmnd *tmp, **prev;
-
- printk(KERN_WARNING "scsi%d : aborting command\n", instance->host_no);
- scsi_print_command(cmd);
+ struct scsi_cmnd *tmp, **prev;
+
+ scmd_printk(KERN_WARNING, cmd, "aborting command\n");
NCR5380_print_status(instance);
* aborted flag and get back into our main loop.
*/
- return 0;
+ return SUCCESS;
}
#endif
*/
dprintk(NDEBUG_ABORT, "scsi%d : abort going into loop.\n", instance->host_no);
- for (prev = (Scsi_Cmnd **) & (hostdata->issue_queue), tmp = (Scsi_Cmnd *) hostdata->issue_queue; tmp; prev = (Scsi_Cmnd **) & (tmp->host_scribble), tmp = (Scsi_Cmnd *) tmp->host_scribble)
+ for (prev = (struct scsi_cmnd **) &(hostdata->issue_queue), tmp = (struct scsi_cmnd *) hostdata->issue_queue; tmp; prev = (struct scsi_cmnd **) &(tmp->host_scribble), tmp = (struct scsi_cmnd *) tmp->host_scribble)
if (cmd == tmp) {
REMOVE(5, *prev, tmp, tmp->host_scribble);
- (*prev) = (Scsi_Cmnd *) tmp->host_scribble;
+ (*prev) = (struct scsi_cmnd *) tmp->host_scribble;
tmp->host_scribble = NULL;
tmp->result = DID_ABORT << 16;
dprintk(NDEBUG_ABORT, "scsi%d : abort removed command from issue queue.\n", instance->host_no);
* it from the disconnected queue.
*/
- for (tmp = (Scsi_Cmnd *) hostdata->disconnected_queue; tmp; tmp = (Scsi_Cmnd *) tmp->host_scribble)
+ for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue; tmp; tmp = (struct scsi_cmnd *) tmp->host_scribble)
if (cmd == tmp) {
dprintk(NDEBUG_ABORT, "scsi%d : aborting disconnected command.\n", instance->host_no);
- if (NCR5380_select(instance, cmd, (int) cmd->tag))
+ if (NCR5380_select(instance, cmd))
return FAILED;
dprintk(NDEBUG_ABORT, "scsi%d : nexus reestablished.\n", instance->host_no);
do_abort(instance);
- for (prev = (Scsi_Cmnd **) & (hostdata->disconnected_queue), tmp = (Scsi_Cmnd *) hostdata->disconnected_queue; tmp; prev = (Scsi_Cmnd **) & (tmp->host_scribble), tmp = (Scsi_Cmnd *) tmp->host_scribble)
+ for (prev = (struct scsi_cmnd **) &(hostdata->disconnected_queue), tmp = (struct scsi_cmnd *) hostdata->disconnected_queue; tmp; prev = (struct scsi_cmnd **) &(tmp->host_scribble), tmp = (struct scsi_cmnd *) tmp->host_scribble)
if (cmd == tmp) {
REMOVE(5, *prev, tmp, tmp->host_scribble);
- *prev = (Scsi_Cmnd *) tmp->host_scribble;
+ *prev = (struct scsi_cmnd *) tmp->host_scribble;
tmp->host_scribble = NULL;
tmp->result = DID_ABORT << 16;
tmp->scsi_done(tmp);
/*
- * Function : int NCR5380_bus_reset (Scsi_Cmnd *cmd)
+ * Function : int NCR5380_bus_reset (struct scsi_cmnd *cmd)
*
* Purpose : reset the SCSI bus.
*
* Locks: host lock taken by caller
*/
-static int NCR5380_bus_reset(Scsi_Cmnd * cmd)
+static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
{
struct Scsi_Host *instance = cmd->device->host;
* drew@colorado.edu
* +1 (303) 666-5836
*
- * DISTRIBUTION RELEASE 7
- *
* For more information, please consult
*
* NCR 5380 Family
#define NCR5380_H
#include <linux/interrupt.h>
-
-#ifdef AUTOSENSE
#include <scsi/scsi_eh.h>
-#endif
-
-#define NCR5380_PUBLIC_RELEASE 7
-#define NCR53C400_PUBLIC_RELEASE 2
#define NDEBUG_ARBITRATION 0x1
#define NDEBUG_AUTOSENSE 0x2
#define DISCONNECT_LONG 2
/*
- * These are "special" values for the tag parameter passed to NCR5380_select.
+ * "Special" value for the (unsigned char) command tag, to indicate
+ * I_T_L nexus instead of I_T_L_Q.
*/
-#define TAG_NEXT -1 /* Use next free tag */
-#define TAG_NONE -2 /*
- * Establish I_T_L nexus instead of I_T_L_Q
- * even on SCSI-II devices.
- */
+#define TAG_NONE 0xff
/*
* These are "special" values for the irq and dma_channel fields of the
* Scsi_Host structure
*/
-#define SCSI_IRQ_NONE 255
#define DMA_NONE 255
#define IRQ_AUTO 254
#define DMA_AUTO 254
#define PORT_AUTO 0xffff /* autoprobe io port for 53c400a */
+#ifndef NO_IRQ
+#define NO_IRQ 0
+#endif
+
#define FLAG_HAS_LAST_BYTE_SENT 1 /* NCR53c81 or better */
#define FLAG_CHECK_LAST_BYTE_SENT 2 /* Only test once */
#define FLAG_NCR53C400 4 /* NCR53c400 */
#define FLAG_NO_PSEUDO_DMA 8 /* Inhibit DMA */
#define FLAG_DTC3181E 16 /* DTC3181E */
+#define FLAG_LATE_DMA_SETUP 32 /* Setup NCR before DMA H/W */
+#define FLAG_TAGGED_QUEUING 64 /* as X3T9.2 spelled it */
#ifndef ASM
+
+#ifdef SUPPORT_TAGS
+struct tag_alloc {
+ DECLARE_BITMAP(allocated, MAX_TAGS);
+ int nr_allocated;
+ int queue_size;
+};
+#endif
+
struct NCR5380_hostdata {
NCR5380_implementation_fields; /* implementation specific */
struct Scsi_Host *host; /* Host backpointer */
volatile int dma_len; /* requested length of DMA */
#endif
volatile unsigned char last_message; /* last message OUT */
- volatile Scsi_Cmnd *connected; /* currently connected command */
- volatile Scsi_Cmnd *issue_queue; /* waiting to be issued */
- volatile Scsi_Cmnd *disconnected_queue; /* waiting for reconnect */
+ volatile struct scsi_cmnd *connected; /* currently connected command */
+ volatile struct scsi_cmnd *issue_queue; /* waiting to be issued */
+ volatile struct scsi_cmnd *disconnected_queue; /* waiting for reconnect */
volatile int restart_select; /* we have disconnected,
used to restart
NCR5380_select() */
int flags;
unsigned long time_expires; /* in jiffies, set prior to sleeping */
int select_time; /* timer in select for target response */
- volatile Scsi_Cmnd *selecting;
+ volatile struct scsi_cmnd *selecting;
struct delayed_work coroutine; /* our co-routine */
-#ifdef NCR5380_STATS
- unsigned timebase; /* Base for time calcs */
- long time_read[8]; /* time to do reads */
- long time_write[8]; /* time to do writes */
- unsigned long bytes_read[8]; /* bytes read */
- unsigned long bytes_write[8]; /* bytes written */
- unsigned pendingr;
- unsigned pendingw;
-#endif
-#ifdef AUTOSENSE
struct scsi_eh_save ses;
+ char info[256];
+ int read_overruns; /* number of bytes to cut from a
+ * transfer to handle chip overruns */
+ int retain_dma_intr;
+ struct work_struct main_task;
+ volatile int main_running;
+#ifdef SUPPORT_TAGS
+ struct tag_alloc TagAlloc[8][8]; /* 8 targets and 8 LUNs */
+#endif
+#ifdef PSEUDO_DMA
+ unsigned spin_max_r;
+ unsigned spin_max_w;
#endif
};
#endif
#define dprintk(flg, fmt, ...) \
- do { if ((NDEBUG) & (flg)) pr_debug(fmt, ## __VA_ARGS__); } while (0)
+ do { if ((NDEBUG) & (flg)) \
+ printk(KERN_DEBUG fmt, ## __VA_ARGS__); } while (0)
#if NDEBUG
#define NCR5380_dprint(flg, arg) \
static irqreturn_t NCR5380_intr(int irq, void *dev_id);
#endif
static void NCR5380_main(struct work_struct *work);
-static void __maybe_unused NCR5380_print_options(struct Scsi_Host *instance);
-static int NCR5380_abort(Scsi_Cmnd * cmd);
-static int NCR5380_bus_reset(Scsi_Cmnd * cmd);
-static int NCR5380_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
-static int __maybe_unused NCR5380_show_info(struct seq_file *,
- struct Scsi_Host *);
-static int __maybe_unused NCR5380_write_info(struct Scsi_Host *instance,
- char *buffer, int length);
-
+static const char *NCR5380_info(struct Scsi_Host *instance);
static void NCR5380_reselect(struct Scsi_Host *instance);
-static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd * cmd, int tag);
+static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd);
#if defined(PSEUDO_DMA) || defined(REAL_DMA) || defined(REAL_DMA_POLL)
static int NCR5380_transfer_dma(struct Scsi_Host *instance, unsigned char *phase, int *count, unsigned char **data);
#endif
(fsa_dev_ptr[cid].sense_data.sense_key ==
NOT_READY)) {
switch (scsicmd->cmnd[0]) {
- case SERVICE_ACTION_IN:
+ case SERVICE_ACTION_IN_16:
if (!(dev->raw_io_interface) ||
!(dev->raw_io_64) ||
((scsicmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16))
scsi_sg_copy_from_buffer(scsicmd, &inq_data, sizeof(inq_data));
return aac_get_container_name(scsicmd);
}
- case SERVICE_ACTION_IN:
+ case SERVICE_ACTION_IN_16:
if (!(dev->raw_io_interface) ||
!(dev->raw_io_64) ||
((scsicmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16))
depth = 256;
else if (depth < 2)
depth = 2;
- scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, depth);
+ scsi_change_queue_depth(sdev, depth);
} else
- scsi_adjust_queue_depth(sdev, 0, 1);
+ scsi_change_queue_depth(sdev, 1);
return 0;
}
* total capacity and the queue depth supported by the target device.
*/
-static int aac_change_queue_depth(struct scsi_device *sdev, int depth,
- int reason)
+static int aac_change_queue_depth(struct scsi_device *sdev, int depth)
{
- if (reason != SCSI_QDEPTH_DEFAULT)
- return -EOPNOTSUPP;
-
if (sdev->tagged_supported && (sdev->type == TYPE_DISK) &&
(sdev_channel(sdev) == CONTAINER_CHANNEL)) {
struct scsi_device * dev;
depth = 256;
else if (depth < 2)
depth = 2;
- scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, depth);
- } else
- scsi_adjust_queue_depth(sdev, 0, 1);
- return sdev->queue_depth;
+ return scsi_change_queue_depth(sdev, depth);
+ }
+
+ return scsi_change_queue_depth(sdev, 1);
}
static ssize_t aac_show_raid_level(struct device *dev, struct device_attribute *attr, char *buf)
AAC_DRIVERNAME,
host->host_no, sdev_channel(dev), sdev_id(dev), dev->lun);
switch (cmd->cmnd[0]) {
- case SERVICE_ACTION_IN:
+ case SERVICE_ACTION_IN_16:
if (!(aac->raw_io_interface) ||
!(aac->raw_io_64) ||
((cmd->cmnd[1] & 0x1f) != SAI_READ_CAPACITY_16))
asc_dvc->cfg->can_tagged_qng |= tid_bit;
asc_dvc->use_tagged_qng |= tid_bit;
}
- scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG,
+ scsi_change_queue_depth(sdev,
asc_dvc->max_dvc_qng[sdev->id]);
}
} else {
asc_dvc->cfg->can_tagged_qng &= ~tid_bit;
asc_dvc->use_tagged_qng &= ~tid_bit;
}
- scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
}
if ((sdev->lun == 0) &&
}
}
- if ((adv_dvc->tagqng_able & tidmask) && sdev->tagged_supported) {
- scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG,
- adv_dvc->max_dvc_qng);
- } else {
- scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
- }
+ if ((adv_dvc->tagqng_able & tidmask) && sdev->tagged_supported)
+ scsi_change_queue_depth(sdev, adv_dvc->max_dvc_qng);
}
/*
*
*
**************************************************************************
-
+
see Documentation/scsi/aha152x.txt for configuration details
**************************************************************************/
#error define AUTOCONF or SETUP0
#endif
-#if defined(AHA152X_DEBUG)
-#define DEBUG_DEFAULT debug_eh
-
-#define DPRINTK(when,msgs...) \
- do { if(HOSTDATA(shpnt)->debug & (when)) printk(msgs); } while(0)
-
-#define DO_LOCK(flags) \
- do { \
- if(spin_is_locked(&QLOCK)) { \
- DPRINTK(debug_intr, DEBUG_LEAD "(%s:%d) already locked at %s:%d\n", CMDINFO(CURRENT_SC), __func__, __LINE__, QLOCKER, QLOCKERL); \
- } \
- DPRINTK(debug_locking, DEBUG_LEAD "(%s:%d) locking\n", CMDINFO(CURRENT_SC), __func__, __LINE__); \
- spin_lock_irqsave(&QLOCK,flags); \
- DPRINTK(debug_locking, DEBUG_LEAD "(%s:%d) locked\n", CMDINFO(CURRENT_SC), __func__, __LINE__); \
- QLOCKER=__func__; \
- QLOCKERL=__LINE__; \
- } while(0)
-
-#define DO_UNLOCK(flags) \
- do { \
- DPRINTK(debug_locking, DEBUG_LEAD "(%s:%d) unlocking (locked at %s:%d)\n", CMDINFO(CURRENT_SC), __func__, __LINE__, QLOCKER, QLOCKERL); \
- spin_unlock_irqrestore(&QLOCK,flags); \
- DPRINTK(debug_locking, DEBUG_LEAD "(%s:%d) unlocked\n", CMDINFO(CURRENT_SC), __func__, __LINE__); \
- QLOCKER="(not locked)"; \
- QLOCKERL=0; \
- } while(0)
-
-#else
-#define DPRINTK(when,msgs...)
#define DO_LOCK(flags) spin_lock_irqsave(&QLOCK,flags)
#define DO_UNLOCK(flags) spin_unlock_irqrestore(&QLOCK,flags)
-#endif
#define LEAD "(scsi%d:%d:%d) "
-#define WARN_LEAD KERN_WARNING LEAD
#define INFO_LEAD KERN_INFO LEAD
-#define NOTE_LEAD KERN_NOTICE LEAD
-#define ERR_LEAD KERN_ERR LEAD
-#define DEBUG_LEAD KERN_DEBUG LEAD
#define CMDINFO(cmd) \
(cmd) ? ((cmd)->device->host->host_no) : -1, \
(cmd) ? ((cmd)->device->id & 0x0f) : -1, \
enum {
not_issued = 0x0001, /* command not yet issued */
- selecting = 0x0002, /* target is beeing selected */
+ selecting = 0x0002, /* target is being selected */
identified = 0x0004, /* IDENTIFY was sent */
disconnected = 0x0008, /* target disconnected */
- completed = 0x0010, /* target sent COMMAND COMPLETE */
+ completed = 0x0010, /* target sent COMMAND COMPLETE */
aborted = 0x0020, /* ABORT was sent */
resetted = 0x0040, /* BUS DEVICE RESET was sent */
spiordy = 0x0080, /* waiting for SPIORDY to raise */
module_param_array(exttrans, int, NULL, 0);
MODULE_PARM_DESC(exttrans,"use extended translation");
-#if !defined(AHA152X_DEBUG)
static int aha152x[] = {0, 11, 7, 1, 1, 0, DELAY_DEFAULT, 0};
module_param_array(aha152x, int, NULL, 0);
MODULE_PARM_DESC(aha152x, "parameters for first controller");
static int aha152x1[] = {0, 11, 7, 1, 1, 0, DELAY_DEFAULT, 0};
module_param_array(aha152x1, int, NULL, 0);
MODULE_PARM_DESC(aha152x1, "parameters for second controller");
-#else
-static int debug[] = {DEBUG_DEFAULT, DEBUG_DEFAULT};
-module_param_array(debug, int, NULL, 0);
-MODULE_PARM_DESC(debug, "flags for driver debugging");
-
-static int aha152x[] = {0, 11, 7, 1, 1, 1, DELAY_DEFAULT, 0, DEBUG_DEFAULT};
-module_param_array(aha152x, int, NULL, 0);
-MODULE_PARM_DESC(aha152x, "parameters for first controller");
-
-static int aha152x1[] = {0, 11, 7, 1, 1, 1, DELAY_DEFAULT, 0, DEBUG_DEFAULT};
-module_param_array(aha152x1, int, NULL, 0);
-MODULE_PARM_DESC(aha152x1, "parameters for second controller");
-#endif /* !defined(AHA152X_DEBUG) */
#endif /* MODULE */
#ifdef __ISAPNP__
/*
* internal states of the host
*
- */
+ */
enum aha152x_state {
idle=0,
unknown,
spinlock_t lock;
/* host lock */
-#if defined(AHA152X_DEBUG)
- const char *locker;
- /* which function has the lock */
- int lockerl; /* where did it get it */
-
- int debug; /* current debugging setting */
-#endif
-
#if defined(AHA152X_STAT)
- int total_commands;
+ int total_commands;
int disconnections;
int busfree_without_any_action;
int busfree_without_old_command;
int busfree_without_new_command;
int busfree_without_done_command;
int busfree_with_check_condition;
- int count[maxstate];
- int count_trans[maxstate];
+ int count[maxstate];
+ int count_trans[maxstate];
unsigned long time[maxstate];
#endif
int delay; /* reset out delay */
int ext_trans; /* extended translation enabled */
- int swint; /* software-interrupt was fired during detect() */
+ int swint; /* software-interrupt was fired during detect() */
int service; /* bh needs to be run */
int in_intr; /* bh is running */
unsigned char msgi[256];
/* received message bytes */
- int msgo_i, msgo_len;
+ int msgo_i, msgo_len;
/* number of sent bytes and length of current messages */
unsigned char msgo[256];
/* pending messages */
static void done(struct Scsi_Host *shpnt, int error);
/* diagnostics */
-static void disp_ports(struct Scsi_Host *shpnt);
static void show_command(Scsi_Cmnd * ptr);
static void show_queues(struct Scsi_Host *shpnt);
static void disp_enintr(struct Scsi_Host *shpnt);
DELAY = setup->delay;
EXT_TRANS = setup->ext_trans;
-#if defined(AHA152X_DEBUG)
- HOSTDATA(shpnt)->debug = setup->debug;
-#endif
-
SETPORT(SCSIID, setup->scsiid << 4);
shpnt->this_id = setup->scsiid;
* setup controller to generate interrupts depending
* on current state (lock has to be acquired)
*
- */
+ */
static int setup_expected_interrupts(struct Scsi_Host *shpnt)
{
if(CURRENT_SC) {
CURRENT_SC->SCp.phase |= 1 << 16;
-
+
if(CURRENT_SC->SCp.phase & selecting) {
- DPRINTK(debug_intr, DEBUG_LEAD "expecting: (seldo) (seltimo) (seldi)\n", CMDINFO(CURRENT_SC));
SETPORT(SSTAT1, SELTO);
SETPORT(SIMODE0, ENSELDO | (DISCONNECTED_SC ? ENSELDI : 0));
SETPORT(SIMODE1, ENSELTIMO);
} else {
- DPRINTK(debug_intr, DEBUG_LEAD "expecting: (phase change) (busfree) %s\n", CMDINFO(CURRENT_SC), CURRENT_SC->SCp.phase & spiordy ? "(spiordy)" : "");
SETPORT(SIMODE0, (CURRENT_SC->SCp.phase & spiordy) ? ENSPIORDY : 0);
- SETPORT(SIMODE1, ENPHASEMIS | ENSCSIRST | ENSCSIPERR | ENBUSFREE);
+ SETPORT(SIMODE1, ENPHASEMIS | ENSCSIRST | ENSCSIPERR | ENBUSFREE);
}
} else if(STATE==seldi) {
- DPRINTK(debug_intr, DEBUG_LEAD "expecting: (phase change) (identify)\n", CMDINFO(CURRENT_SC));
SETPORT(SIMODE0, 0);
- SETPORT(SIMODE1, ENPHASEMIS | ENSCSIRST | ENSCSIPERR | ENBUSFREE);
+ SETPORT(SIMODE1, ENPHASEMIS | ENSCSIRST | ENSCSIPERR | ENBUSFREE);
} else {
- DPRINTK(debug_intr, DEBUG_LEAD "expecting: %s %s\n",
- CMDINFO(CURRENT_SC),
- DISCONNECTED_SC ? "(reselection)" : "",
- ISSUE_SC ? "(busfree)" : "");
SETPORT(SIMODE0, DISCONNECTED_SC ? ENSELDI : 0);
SETPORT(SIMODE1, ENSCSIRST | ( (ISSUE_SC||DONE_SC) ? ENBUSFREE : 0));
}
}
-/*
+/*
* Queue a command and setup interrupts for a free bus.
*/
static int aha152x_internal_queue(Scsi_Cmnd *SCpnt, struct completion *complete,
struct Scsi_Host *shpnt = SCpnt->device->host;
unsigned long flags;
-#if defined(AHA152X_DEBUG)
- if (HOSTDATA(shpnt)->debug & debug_queue) {
- printk(INFO_LEAD "queue: %p; cmd_len=%d pieces=%d size=%u cmnd=",
- CMDINFO(SCpnt), SCpnt, SCpnt->cmd_len,
- scsi_sg_count(SCpnt), scsi_bufflen(SCpnt));
- __scsi_print_command(SCpnt->cmnd);
- }
-#endif
-
SCpnt->scsi_done = done;
SCpnt->SCp.phase = not_issued | phase;
SCpnt->SCp.Status = 0x1; /* Ilegal status by SCSI standard */
if(SCpnt->SCp.phase & (resetting|check_condition)) {
if (!SCpnt->host_scribble || SCSEM(SCpnt) || SCNEXT(SCpnt)) {
- printk(ERR_LEAD "cannot reuse command\n", CMDINFO(SCpnt));
+ scmd_printk(KERN_ERR, SCpnt, "cannot reuse command\n");
return FAILED;
}
} else {
SCpnt->host_scribble = kmalloc(sizeof(struct aha152x_scdata), GFP_ATOMIC);
if(!SCpnt->host_scribble) {
- printk(ERR_LEAD "allocation failed\n", CMDINFO(SCpnt));
+ scmd_printk(KERN_ERR, SCpnt, "allocation failed\n");
return FAILED;
}
}
*/
static int aha152x_queue_lck(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *))
{
-#if 0
- if(*SCpnt->cmnd == REQUEST_SENSE) {
- SCpnt->result = 0;
- done(SCpnt);
-
- return 0;
- }
-#endif
-
return aha152x_internal_queue(SCpnt, NULL, 0, done);
}
/*
- *
*
*/
static void reset_done(Scsi_Cmnd *SCpnt)
{
-#if 0
- struct Scsi_Host *shpnt = SCpnt->host;
- DPRINTK(debug_eh, INFO_LEAD "reset_done called\n", CMDINFO(SCpnt));
-#endif
if(SCSEM(SCpnt)) {
complete(SCSEM(SCpnt));
} else {
Scsi_Cmnd *ptr;
unsigned long flags;
-#if defined(AHA152X_DEBUG)
- if(HOSTDATA(shpnt)->debug & debug_eh) {
- printk(DEBUG_LEAD "abort(%p)", CMDINFO(SCpnt), SCpnt);
- show_queues(shpnt);
- }
-#endif
-
DO_LOCK(flags);
ptr=remove_SC(&ISSUE_SC, SCpnt);
if(ptr) {
- DPRINTK(debug_eh, DEBUG_LEAD "not yet issued - SUCCESS\n", CMDINFO(SCpnt));
-
HOSTDATA(shpnt)->commands--;
if (!HOSTDATA(shpnt)->commands)
SETPORT(PORTA, 0);
SCpnt->host_scribble=NULL;
return SUCCESS;
- }
+ }
DO_UNLOCK(flags);
*
*/
- printk(ERR_LEAD "cannot abort running or disconnected command\n", CMDINFO(SCpnt));
+ scmd_printk(KERN_ERR, SCpnt,
+ "cannot abort running or disconnected command\n");
return FAILED;
}
unsigned long flags;
unsigned long timeleft;
-#if defined(AHA152X_DEBUG)
- if(HOSTDATA(shpnt)->debug & debug_eh) {
- printk(INFO_LEAD "aha152x_device_reset(%p)", CMDINFO(SCpnt), SCpnt);
- show_queues(shpnt);
- }
-#endif
-
if(CURRENT_SC==SCpnt) {
- printk(ERR_LEAD "cannot reset current device\n", CMDINFO(SCpnt));
+ scmd_printk(KERN_ERR, SCpnt, "cannot reset current device\n");
return FAILED;
}
} else if(disconnected) {
append_SC(&DISCONNECTED_SC, SCpnt);
}
-
+
ret = FAILED;
}
if(SCDATA(ptr)) {
next = SCNEXT(ptr);
} else {
- printk(DEBUG_LEAD "queue corrupted at %p\n", CMDINFO(ptr), ptr);
+ scmd_printk(KERN_DEBUG, ptr,
+ "queue corrupted at %p\n", ptr);
next = NULL;
}
if (!ptr->device->soft_reset) {
- DPRINTK(debug_eh, DEBUG_LEAD "disconnected command %p removed\n", CMDINFO(ptr), ptr);
remove_SC(SCs, ptr);
HOSTDATA(shpnt)->commands--;
kfree(ptr->host_scribble);
DO_LOCK(flags);
-#if defined(AHA152X_DEBUG)
- if(HOSTDATA(shpnt)->debug & debug_eh) {
- printk(KERN_DEBUG "scsi%d: bus reset", shpnt->host_no);
- show_queues(shpnt);
- }
-#endif
-
free_hard_reset_SCs(shpnt, &ISSUE_SC);
free_hard_reset_SCs(shpnt, &DISCONNECTED_SC);
- DPRINTK(debug_eh, KERN_DEBUG "scsi%d: resetting bus\n", shpnt->host_no);
-
SETPORT(SCSISEQ, SCSIRSTO);
mdelay(256);
SETPORT(SCSISEQ, 0);
mdelay(DELAY);
- DPRINTK(debug_eh, KERN_DEBUG "scsi%d: bus resetted\n", shpnt->host_no);
-
setup_expected_interrupts(shpnt);
if(HOSTDATA(shpnt)->commands==0)
SETPORT(PORTA, 0);
*/
int aha152x_host_reset_host(struct Scsi_Host *shpnt)
{
- DPRINTK(debug_eh, KERN_DEBUG "scsi%d: host reset\n", shpnt->host_no);
-
aha152x_bus_reset_host(shpnt);
-
- DPRINTK(debug_eh, KERN_DEBUG "scsi%d: resetting ports\n", shpnt->host_no);
reset_ports(shpnt);
return SUCCESS;
/*
* Reset the host (bus and controller)
- *
+ *
*/
static int aha152x_host_reset(Scsi_Cmnd *SCpnt)
{
{
if (CURRENT_SC) {
if(DONE_SC)
- printk(ERR_LEAD "there's already a completed command %p - will cause abort\n", CMDINFO(CURRENT_SC), DONE_SC);
+ scmd_printk(KERN_ERR, CURRENT_SC,
+ "there's already a completed command %p "
+ "- will cause abort\n", DONE_SC);
DONE_SC = CURRENT_SC;
CURRENT_SC = NULL;
return IRQ_NONE;
if( TESTLO(DMASTAT, INTSTAT) )
- return IRQ_NONE;
+ return IRQ_NONE;
/* no more interrupts from the controller, while we're busy.
INTEN is restored by the BH handler */
SETPORT(SXFRCTL0, CH1);
SETPORT(SSTAT1, CLRBUSFREE);
-
+
if(CURRENT_SC) {
#if defined(AHA152X_STAT)
action++;
done(shpnt, (CURRENT_SC->SCp.Status & 0xff) | ((CURRENT_SC->SCp.Message & 0xff) << 8) | (DID_OK << 16));
} else if(CURRENT_SC->SCp.phase & aborted) {
- DPRINTK(debug_eh, DEBUG_LEAD "ABORT sent\n", CMDINFO(CURRENT_SC));
done(shpnt, (CURRENT_SC->SCp.Status & 0xff) | ((CURRENT_SC->SCp.Message & 0xff) << 8) | (DID_ABORT << 16));
} else if(CURRENT_SC->SCp.phase & resetted) {
- DPRINTK(debug_eh, DEBUG_LEAD "BUS DEVICE RESET sent\n", CMDINFO(CURRENT_SC));
done(shpnt, (CURRENT_SC->SCp.Status & 0xff) | ((CURRENT_SC->SCp.Message & 0xff) << 8) | (DID_RESET << 16));
} else if(CURRENT_SC->SCp.phase & disconnected) {
/* target sent DISCONNECT */
- DPRINTK(debug_selection, DEBUG_LEAD "target disconnected at %d/%d\n",
- CMDINFO(CURRENT_SC),
- scsi_get_resid(CURRENT_SC),
- scsi_bufflen(CURRENT_SC));
#if defined(AHA152X_STAT)
HOSTDATA(shpnt)->disconnections++;
#endif
struct scsi_cmnd *cmd = HOSTDATA(shpnt)->done_SC;
struct aha152x_scdata *sc = SCDATA(cmd);
-#if 0
- if(HOSTDATA(shpnt)->debug & debug_eh) {
- printk(ERR_LEAD "received sense: ", CMDINFO(DONE_SC));
- scsi_print_sense("bh", DONE_SC);
- }
-#endif
-
scsi_eh_restore_cmnd(cmd, &sc->ses);
cmd->SCp.Status = SAM_STAT_CHECK_CONDITION;
#if defined(AHA152X_STAT)
HOSTDATA(shpnt)->busfree_with_check_condition++;
#endif
-#if 0
- DPRINTK(debug_eh, ERR_LEAD "CHECK CONDITION found\n", CMDINFO(DONE_SC));
-#endif
if(!(DONE_SC->SCp.phase & not_issued)) {
struct aha152x_scdata *sc;
Scsi_Cmnd *ptr = DONE_SC;
DONE_SC=NULL;
-#if 0
- DPRINTK(debug_eh, ERR_LEAD "requesting sense\n", CMDINFO(ptr));
-#endif
sc = SCDATA(ptr);
/* It was allocated in aha152x_internal_queue? */
DO_UNLOCK(flags);
aha152x_internal_queue(ptr, NULL, check_condition, ptr->scsi_done);
DO_LOCK(flags);
-#if 0
- } else {
- DPRINTK(debug_eh, ERR_LEAD "command not issued - CHECK CONDITION ignored\n", CMDINFO(DONE_SC));
-#endif
}
}
if(DONE_SC && DONE_SC->scsi_done) {
-#if defined(AHA152X_DEBUG)
- int hostno=DONE_SC->device->host->host_no;
- int id=DONE_SC->device->id & 0xf;
- int lun=((u8)DONE_SC->device->lun) & 0x7;
-#endif
Scsi_Cmnd *ptr = DONE_SC;
DONE_SC=NULL;
}
DO_UNLOCK(flags);
- DPRINTK(debug_done, DEBUG_LEAD "calling scsi_done(%p)\n", hostno, id, lun, ptr);
- ptr->scsi_done(ptr);
- DPRINTK(debug_done, DEBUG_LEAD "scsi_done(%p) returned\n", hostno, id, lun, ptr);
+ ptr->scsi_done(ptr);
DO_LOCK(flags);
}
#if defined(AHA152X_STAT)
action++;
#endif
- CURRENT_SC->SCp.phase |= selecting;
-
- DPRINTK(debug_selection, DEBUG_LEAD "selecting target\n", CMDINFO(CURRENT_SC));
+ CURRENT_SC->SCp.phase |= selecting;
/* clear selection timeout */
SETPORT(SSTAT1, SELTO);
SETPORT(SSTAT1, CLRBUSFREE);
SETPORT(SSTAT1, CLRPHASECHG);
- CURRENT_SC->SCp.phase &= ~(selecting|not_issued);
+ CURRENT_SC->SCp.phase &= ~(selecting|not_issued);
SETPORT(SCSISEQ, 0);
if (TESTLO(SSTAT0, SELDO)) {
- printk(ERR_LEAD "aha152x: passing bus free condition\n", CMDINFO(CURRENT_SC));
+ scmd_printk(KERN_ERR, CURRENT_SC,
+ "aha152x: passing bus free condition\n");
done(shpnt, DID_NO_CONNECT << 16);
return;
}
SETPORT(SSTAT0, CLRSELDO);
-
+
ADDMSGO(IDENTIFY(RECONNECT, CURRENT_SC->device->lun));
if (CURRENT_SC->SCp.phase & aborting) {
} else if (CURRENT_SC->SCp.phase & resetting) {
ADDMSGO(BUS_DEVICE_RESET);
} else if (SYNCNEG==0 && SYNCHRONOUS) {
- CURRENT_SC->SCp.phase |= syncneg;
+ CURRENT_SC->SCp.phase |= syncneg;
MSGOLEN += spi_populate_sync_msg(&MSGO(MSGOLEN), 50, 8);
SYNCNEG=1; /* negotiation in progress */
}
*/
static void selto_run(struct Scsi_Host *shpnt)
{
- SETPORT(SCSISEQ, 0);
+ SETPORT(SCSISEQ, 0);
SETPORT(SSTAT1, CLRSELTIMO);
- DPRINTK(debug_selection, DEBUG_LEAD "selection timeout\n", CMDINFO(CURRENT_SC));
-
- if(!CURRENT_SC) {
- DPRINTK(debug_selection, DEBUG_LEAD "!CURRENT_SC\n", CMDINFO(CURRENT_SC));
+ if (!CURRENT_SC)
return;
- }
- CURRENT_SC->SCp.phase &= ~selecting;
+ CURRENT_SC->SCp.phase &= ~selecting;
- if (CURRENT_SC->SCp.phase & aborted) {
- DPRINTK(debug_selection, DEBUG_LEAD "aborted\n", CMDINFO(CURRENT_SC));
+ if (CURRENT_SC->SCp.phase & aborted)
done(shpnt, DID_ABORT << 16);
- } else if (TESTLO(SSTAT0, SELINGO)) {
- DPRINTK(debug_selection, DEBUG_LEAD "arbitration not won\n", CMDINFO(CURRENT_SC));
+ else if (TESTLO(SSTAT0, SELINGO))
done(shpnt, DID_BUS_BUSY << 16);
- } else {
+ else
/* ARBITRATION won, but SELECTION failed */
- DPRINTK(debug_selection, DEBUG_LEAD "selection failed\n", CMDINFO(CURRENT_SC));
done(shpnt, DID_NO_CONNECT << 16);
- }
}
/*
if(CURRENT_SC) {
if(!(CURRENT_SC->SCp.phase & not_issued))
- printk(ERR_LEAD "command should not have been issued yet\n", CMDINFO(CURRENT_SC));
-
- DPRINTK(debug_selection, ERR_LEAD "command requeued - reselection\n", CMDINFO(CURRENT_SC));
+ scmd_printk(KERN_ERR, CURRENT_SC,
+ "command should not have been issued yet\n");
DO_LOCK(flags);
append_SC(&ISSUE_SC, CURRENT_SC);
CURRENT_SC = NULL;
}
- if(!DISCONNECTED_SC) {
- DPRINTK(debug_selection, DEBUG_LEAD "unexpected SELDI ", CMDINFO(CURRENT_SC));
+ if (!DISCONNECTED_SC)
return;
- }
RECONN_TARGET=-1;
selid = GETPORT(SELID) & ~(1 << shpnt->this_id);
if (selid==0) {
- printk("aha152x%d: target id unknown (%02x)\n", HOSTNO, selid);
+ shost_printk(KERN_INFO, shpnt,
+ "target id unknown (%02x)\n", selid);
return;
}
;
if(selid & ~(1 << target)) {
- printk("aha152x%d: multiple targets reconnected (%02x)\n",
- HOSTNO, selid);
+ shost_printk(KERN_INFO, shpnt,
+ "multiple targets reconnected (%02x)\n", selid);
}
SETRATE(HOSTDATA(shpnt)->syncrate[target]);
RECONN_TARGET=target;
- DPRINTK(debug_selection, DEBUG_LEAD "target %d reselected (%02x).\n", CMDINFO(CURRENT_SC), target, selid);
}
/*
if(sstat1 & (PHASECHG|PHASEMIS|BUSFREE) || !(sstat1 & REQINIT))
return;
- if(TESTLO(SSTAT0,SPIORDY)) {
- DPRINTK(debug_msgi, DEBUG_LEAD "!SPIORDY\n", CMDINFO(CURRENT_SC));
+ if (TESTLO(SSTAT0, SPIORDY))
return;
- }
ADDMSGI(GETPORT(SCSIDAT));
-#if defined(AHA152X_DEBUG)
- if (HOSTDATA(shpnt)->debug & debug_msgi) {
- printk(INFO_LEAD "inbound message %02x ", CMDINFO(CURRENT_SC), MSGI(0));
- spi_print_msg(&MSGI(0));
- printk("\n");
- }
-#endif
-
if(!CURRENT_SC) {
if(LASTSTATE!=seldi) {
- printk(KERN_ERR "aha152x%d: message in w/o current command not after reselection\n", HOSTNO);
+ shost_printk(KERN_ERR, shpnt,
+ "message in w/o current command"
+ " not after reselection\n");
}
/*
- * Handle reselection
- */
+ * Handle reselection
+ */
if(!(MSGI(0) & IDENTIFY_BASE)) {
- printk(KERN_ERR "aha152x%d: target didn't identify after reselection\n", HOSTNO);
+ shost_printk(KERN_ERR, shpnt,
+ "target didn't identify after reselection\n");
continue;
}
if (!CURRENT_SC) {
show_queues(shpnt);
- printk(KERN_ERR "aha152x%d: no disconnected command for target %d/%d\n", HOSTNO, RECONN_TARGET, MSGI(0) & 0x3f);
+ shost_printk(KERN_ERR, shpnt,
+ "no disconnected command"
+ " for target %d/%d\n",
+ RECONN_TARGET, MSGI(0) & 0x3f);
continue;
}
- DPRINTK(debug_msgi, DEBUG_LEAD "target reconnected\n", CMDINFO(CURRENT_SC));
-
CURRENT_SC->SCp.Message = MSGI(0);
CURRENT_SC->SCp.phase &= ~disconnected;
/* next message if any */
continue;
- }
+ }
CURRENT_SC->SCp.Message = MSGI(0);
switch (MSGI(0)) {
case DISCONNECT:
if (!RECONNECT)
- printk(WARN_LEAD "target was not allowed to disconnect\n", CMDINFO(CURRENT_SC));
+ scmd_printk(KERN_WARNING, CURRENT_SC,
+ "target was not allowed to disconnect\n");
CURRENT_SC->SCp.phase |= disconnected;
break;
case COMMAND_COMPLETE:
- if(CURRENT_SC->SCp.phase & completed)
- DPRINTK(debug_msgi, DEBUG_LEAD "again COMMAND COMPLETE\n", CMDINFO(CURRENT_SC));
-
CURRENT_SC->SCp.phase |= completed;
break;
case MESSAGE_REJECT:
if (SYNCNEG==1) {
- printk(INFO_LEAD "Synchronous Data Transfer Request was rejected\n", CMDINFO(CURRENT_SC));
+ scmd_printk(KERN_INFO, CURRENT_SC,
+ "Synchronous Data Transfer Request"
+ " was rejected\n");
SYNCNEG=2; /* negotiation completed */
} else
- printk(INFO_LEAD "inbound message (MESSAGE REJECT)\n", CMDINFO(CURRENT_SC));
+ scmd_printk(KERN_INFO, CURRENT_SC,
+ "inbound message (MESSAGE REJECT)\n");
break;
case SAVE_POINTERS:
long ticks;
if (MSGI(1) != 3) {
- printk(ERR_LEAD "SDTR message length!=3\n", CMDINFO(CURRENT_SC));
+ scmd_printk(KERN_ERR, CURRENT_SC,
+ "SDTR message length!=3\n");
break;
}
/* negotiation in progress */
if (ticks > 9 || MSGI(4) < 1 || MSGI(4) > 8) {
ADDMSGO(MESSAGE_REJECT);
- printk(INFO_LEAD "received Synchronous Data Transfer Request invalid - rejected\n", CMDINFO(CURRENT_SC));
+ scmd_printk(KERN_INFO,
+ CURRENT_SC,
+ "received Synchronous Data Transfer Request invalid - rejected\n");
break;
}
-
+
SYNCRATE |= ((ticks - 2) << 4) + MSGI(4);
} else if (ticks <= 9 && MSGI(4) >= 1) {
ADDMSGO(EXTENDED_MESSAGE);
SYNCRATE |= ((ticks - 2) << 4) + MSGI(4);
} else {
/* requested SDTR is too slow, do it asynchronously */
- printk(INFO_LEAD "Synchronous Data Transfer Request too slow - Rejecting\n", CMDINFO(CURRENT_SC));
+ scmd_printk(KERN_INFO,
+ CURRENT_SC,
+ "Synchronous Data Transfer Request too slow - Rejecting\n");
ADDMSGO(MESSAGE_REJECT);
}
- SYNCNEG=2; /* negotiation completed */
+ /* negotiation completed */
+ SYNCNEG=2;
SETRATE(SYNCRATE);
}
break;
static void msgi_end(struct Scsi_Host *shpnt)
{
if(MSGILEN>0)
- printk(WARN_LEAD "target left before message completed (%d)\n", CMDINFO(CURRENT_SC), MSGILEN);
+ scmd_printk(KERN_WARNING, CURRENT_SC,
+ "target left before message completed (%d)\n",
+ MSGILEN);
- if (MSGOLEN > 0 && !(GETPORT(SSTAT1) & BUSFREE)) {
- DPRINTK(debug_msgi, DEBUG_LEAD "msgo pending\n", CMDINFO(CURRENT_SC));
+ if (MSGOLEN > 0 && !(GETPORT(SSTAT1) & BUSFREE))
SETPORT(SCSISIG, P_MSGI | SIG_ATNO);
- }
}
/*
if((CURRENT_SC->SCp.phase & syncneg) && SYNCNEG==2 && SYNCRATE==0) {
ADDMSGO(IDENTIFY(RECONNECT, CURRENT_SC->device->lun));
} else {
- printk(INFO_LEAD "unexpected MESSAGE OUT phase; rejecting\n", CMDINFO(CURRENT_SC));
+ scmd_printk(KERN_INFO, CURRENT_SC,
+ "unexpected MESSAGE OUT phase; rejecting\n");
ADDMSGO(MESSAGE_REJECT);
}
}
-#if defined(AHA152X_DEBUG)
- if(HOSTDATA(shpnt)->debug & debug_msgo) {
- int i;
-
- printk(DEBUG_LEAD "messages( ", CMDINFO(CURRENT_SC));
- for (i=0; i<MSGOLEN; i+=spi_print_msg(&MSGO(i)), printk(" "))
- ;
- printk(")\n");
- }
-#endif
}
/*
*/
static void msgo_run(struct Scsi_Host *shpnt)
{
- if(MSGO_I==MSGOLEN)
- DPRINTK(debug_msgo, DEBUG_LEAD "messages all sent (%d/%d)\n", CMDINFO(CURRENT_SC), MSGO_I, MSGOLEN);
-
while(MSGO_I<MSGOLEN) {
- DPRINTK(debug_msgo, DEBUG_LEAD "message byte %02x (%d/%d)\n", CMDINFO(CURRENT_SC), MSGO(MSGO_I), MSGO_I, MSGOLEN);
-
- if(TESTLO(SSTAT0, SPIORDY)) {
- DPRINTK(debug_msgo, DEBUG_LEAD "!SPIORDY\n", CMDINFO(CURRENT_SC));
+ if (TESTLO(SSTAT0, SPIORDY))
return;
- }
if (MSGO_I==MSGOLEN-1) {
/* Leave MESSAGE OUT after transfer */
static void msgo_end(struct Scsi_Host *shpnt)
{
if(MSGO_I<MSGOLEN) {
- printk(ERR_LEAD "message sent incompletely (%d/%d)\n", CMDINFO(CURRENT_SC), MSGO_I, MSGOLEN);
+ scmd_printk(KERN_ERR, CURRENT_SC,
+ "message sent incompletely (%d/%d)\n",
+ MSGO_I, MSGOLEN);
if(SYNCNEG==1) {
- printk(INFO_LEAD "Synchronous Data Transfer Request was rejected\n", CMDINFO(CURRENT_SC));
+ scmd_printk(KERN_INFO, CURRENT_SC,
+ "Synchronous Data Transfer Request was rejected\n");
SYNCNEG=2;
}
}
-
+
MSGO_I = 0;
MSGOLEN = 0;
}
-/*
+/*
* command phase
*
*/
static void cmd_init(struct Scsi_Host *shpnt)
{
if (CURRENT_SC->SCp.sent_command) {
- printk(ERR_LEAD "command already sent\n", CMDINFO(CURRENT_SC));
+ scmd_printk(KERN_ERR, CURRENT_SC,
+ "command already sent\n");
done(shpnt, DID_ERROR << 16);
return;
}
-#if defined(AHA152X_DEBUG)
- if (HOSTDATA(shpnt)->debug & debug_cmd) {
- printk(DEBUG_LEAD "cmd_init: ", CMDINFO(CURRENT_SC));
- __scsi_print_command(CURRENT_SC->cmnd);
- }
-#endif
-
CMD_I=0;
}
*/
static void cmd_run(struct Scsi_Host *shpnt)
{
- if(CMD_I==CURRENT_SC->cmd_len) {
- DPRINTK(debug_cmd, DEBUG_LEAD "command already completely sent (%d/%d)", CMDINFO(CURRENT_SC), CMD_I, CURRENT_SC->cmd_len);
- disp_ports(shpnt);
- }
-
while(CMD_I<CURRENT_SC->cmd_len) {
- DPRINTK(debug_cmd, DEBUG_LEAD "command byte %02x (%d/%d)\n", CMDINFO(CURRENT_SC), CURRENT_SC->cmnd[CMD_I], CMD_I, CURRENT_SC->cmd_len);
-
- if(TESTLO(SSTAT0, SPIORDY)) {
- DPRINTK(debug_cmd, DEBUG_LEAD "!SPIORDY\n", CMDINFO(CURRENT_SC));
+ if (TESTLO(SSTAT0, SPIORDY))
return;
- }
SETPORT(SCSIDAT, CURRENT_SC->cmnd[CMD_I++]);
}
static void cmd_end(struct Scsi_Host *shpnt)
{
if(CMD_I<CURRENT_SC->cmd_len)
- printk(ERR_LEAD "command sent incompletely (%d/%d)\n", CMDINFO(CURRENT_SC), CMD_I, CURRENT_SC->cmd_len);
+ scmd_printk(KERN_ERR, CURRENT_SC,
+ "command sent incompletely (%d/%d)\n",
+ CMD_I, CURRENT_SC->cmd_len);
else
CURRENT_SC->SCp.sent_command++;
}
*/
static void status_run(struct Scsi_Host *shpnt)
{
- if(TESTLO(SSTAT0,SPIORDY)) {
- DPRINTK(debug_status, DEBUG_LEAD "!SPIORDY\n", CMDINFO(CURRENT_SC));
+ if (TESTLO(SSTAT0, SPIORDY))
return;
- }
CURRENT_SC->SCp.Status = GETPORT(SCSIDAT);
-#if defined(AHA152X_DEBUG)
- if (HOSTDATA(shpnt)->debug & debug_status) {
- printk(DEBUG_LEAD "inbound status %02x ", CMDINFO(CURRENT_SC), CURRENT_SC->SCp.Status);
- scsi_print_status(CURRENT_SC->SCp.Status);
- printk("\n");
- }
-#endif
}
/*
SETPORT(SIMODE1, ENSCSIPERR | ENSCSIRST | ENPHASEMIS | ENBUSFREE);
DATA_LEN=0;
- DPRINTK(debug_datai,
- DEBUG_LEAD "datai_init: request_bufflen=%d resid=%d\n",
- CMDINFO(CURRENT_SC), scsi_bufflen(CURRENT_SC),
- scsi_get_resid(CURRENT_SC));
}
static void datai_run(struct Scsi_Host *shpnt)
barrier();
if(TESTLO(DMASTAT, DFIFOFULL|INTSTAT)) {
- printk(ERR_LEAD "datai timeout", CMDINFO(CURRENT_SC));
- disp_ports(shpnt);
+ scmd_printk(KERN_ERR, CURRENT_SC, "datai timeout\n");
break;
}
barrier();
if(TESTLO(SSTAT2, SEMPTY)) {
- printk(ERR_LEAD "datai sempty timeout", CMDINFO(CURRENT_SC));
- disp_ports(shpnt);
+ scmd_printk(KERN_ERR, CURRENT_SC,
+ "datai sempty timeout");
break;
}
if(CURRENT_SC->SCp.this_residual>0) {
while(fifodata>0 && CURRENT_SC->SCp.this_residual>0) {
- data_count = fifodata>CURRENT_SC->SCp.this_residual ?
+ data_count = fifodata > CURRENT_SC->SCp.this_residual ?
CURRENT_SC->SCp.this_residual :
fifodata;
fifodata -= data_count;
- if(data_count & 1) {
- DPRINTK(debug_datai, DEBUG_LEAD "8bit\n", CMDINFO(CURRENT_SC));
- SETPORT(DMACNTRL0, ENDMA|_8BIT);
- *CURRENT_SC->SCp.ptr++ = GETPORT(DATAPORT);
- CURRENT_SC->SCp.this_residual--;
- DATA_LEN++;
- SETPORT(DMACNTRL0, ENDMA);
- }
-
- if(data_count > 1) {
- DPRINTK(debug_datai, DEBUG_LEAD "16bit(%d)\n", CMDINFO(CURRENT_SC), data_count);
- data_count >>= 1;
- insw(DATAPORT, CURRENT_SC->SCp.ptr, data_count);
- CURRENT_SC->SCp.ptr += 2 * data_count;
- CURRENT_SC->SCp.this_residual -= 2 * data_count;
- DATA_LEN += 2 * data_count;
- }
-
- if(CURRENT_SC->SCp.this_residual==0 && CURRENT_SC->SCp.buffers_residual>0) {
- /* advance to next buffer */
- CURRENT_SC->SCp.buffers_residual--;
- CURRENT_SC->SCp.buffer++;
- CURRENT_SC->SCp.ptr = SG_ADDRESS(CURRENT_SC->SCp.buffer);
- CURRENT_SC->SCp.this_residual = CURRENT_SC->SCp.buffer->length;
- }
- }
- } else if(fifodata>0) {
- printk(ERR_LEAD "no buffers left for %d(%d) bytes (data overrun!?)\n", CMDINFO(CURRENT_SC), fifodata, GETPORT(FIFOSTAT));
- SETPORT(DMACNTRL0, ENDMA|_8BIT);
+ if (data_count & 1) {
+ SETPORT(DMACNTRL0, ENDMA|_8BIT);
+ *CURRENT_SC->SCp.ptr++ = GETPORT(DATAPORT);
+ CURRENT_SC->SCp.this_residual--;
+ DATA_LEN++;
+ SETPORT(DMACNTRL0, ENDMA);
+ }
+
+ if (data_count > 1) {
+ data_count >>= 1;
+ insw(DATAPORT, CURRENT_SC->SCp.ptr, data_count);
+ CURRENT_SC->SCp.ptr += 2 * data_count;
+ CURRENT_SC->SCp.this_residual -= 2 * data_count;
+ DATA_LEN += 2 * data_count;
+ }
+
+ if (CURRENT_SC->SCp.this_residual == 0 &&
+ CURRENT_SC->SCp.buffers_residual > 0) {
+ /* advance to next buffer */
+ CURRENT_SC->SCp.buffers_residual--;
+ CURRENT_SC->SCp.buffer++;
+ CURRENT_SC->SCp.ptr = SG_ADDRESS(CURRENT_SC->SCp.buffer);
+ CURRENT_SC->SCp.this_residual = CURRENT_SC->SCp.buffer->length;
+ }
+ }
+ } else if (fifodata > 0) {
+ scmd_printk(KERN_ERR, CURRENT_SC,
+ "no buffers left for %d(%d) bytes"
+ " (data overrun!?)\n",
+ fifodata, GETPORT(FIFOSTAT));
+ SETPORT(DMACNTRL0, ENDMA|_8BIT);
while(fifodata>0) {
int data;
data=GETPORT(DATAPORT);
- DPRINTK(debug_datai, DEBUG_LEAD "data=%02x\n", CMDINFO(CURRENT_SC), data);
fifodata--;
DATA_LEN++;
}
- SETPORT(DMACNTRL0, ENDMA|_8BIT);
+ SETPORT(DMACNTRL0, ENDMA|_8BIT);
}
}
TESTLO(DMASTAT, DFIFOEMP) ||
TESTLO(SSTAT2, SEMPTY) ||
GETPORT(FIFOSTAT)>0) {
- /*
+ /*
* something went wrong, if there's something left in the fifos
* or the phase didn't change
*/
- printk(ERR_LEAD "fifos should be empty and phase should have changed\n", CMDINFO(CURRENT_SC));
- disp_ports(shpnt);
+ scmd_printk(KERN_ERR, CURRENT_SC,
+ "fifos should be empty and phase should have changed\n");
}
if(DATA_LEN!=GETSTCNT()) {
- printk(ERR_LEAD
- "manual transfer count differs from automatic (count=%d;stcnt=%d;diff=%d;fifostat=%d)",
- CMDINFO(CURRENT_SC), DATA_LEN, GETSTCNT(), GETSTCNT()-DATA_LEN, GETPORT(FIFOSTAT));
- disp_ports(shpnt);
+ scmd_printk(KERN_ERR, CURRENT_SC,
+ "manual transfer count differs from automatic "
+ "(count=%d;stcnt=%d;diff=%d;fifostat=%d)",
+ DATA_LEN, GETSTCNT(), GETSTCNT()-DATA_LEN,
+ GETPORT(FIFOSTAT));
mdelay(10000);
}
}
{
CMD_INC_RESID(CURRENT_SC, -GETSTCNT());
- DPRINTK(debug_datai,
- DEBUG_LEAD "datai_end: request_bufflen=%d resid=%d stcnt=%d\n",
- CMDINFO(CURRENT_SC), scsi_bufflen(CURRENT_SC),
- scsi_get_resid(CURRENT_SC), GETSTCNT());
-
SETPORT(SXFRCTL0, CH1|CLRSTCNT);
SETPORT(DMACNTRL0, 0);
}
SETPORT(SIMODE1, ENSCSIPERR | ENSCSIRST | ENPHASEMIS | ENBUSFREE );
DATA_LEN = scsi_get_resid(CURRENT_SC);
-
- DPRINTK(debug_datao,
- DEBUG_LEAD "datao_init: request_bufflen=%d; resid=%d\n",
- CMDINFO(CURRENT_SC), scsi_bufflen(CURRENT_SC),
- scsi_get_resid(CURRENT_SC));
}
static void datao_run(struct Scsi_Host *shpnt)
data_count=CURRENT_SC->SCp.this_residual;
if(TESTLO(DMASTAT, DFIFOEMP)) {
- printk(ERR_LEAD "datao fifo not empty (%d)", CMDINFO(CURRENT_SC), GETPORT(FIFOSTAT));
- disp_ports(shpnt);
+ scmd_printk(KERN_ERR, CURRENT_SC,
+ "datao fifo not empty (%d)",
+ GETPORT(FIFOSTAT));
break;
}
CURRENT_SC->SCp.ptr += 2 * data_count;
CURRENT_SC->SCp.this_residual -= 2 * data_count;
CMD_INC_RESID(CURRENT_SC, -2 * data_count);
- }
+ }
if(CURRENT_SC->SCp.this_residual==0 && CURRENT_SC->SCp.buffers_residual>0) {
/* advance to next buffer */
barrier();
if(TESTLO(DMASTAT, DFIFOEMP|INTSTAT)) {
- printk(ERR_LEAD "dataout timeout", CMDINFO(CURRENT_SC));
- disp_ports(shpnt);
+ scmd_printk(KERN_ERR, CURRENT_SC, "dataout timeout\n");
break;
}
}
{
if(TESTLO(DMASTAT, DFIFOEMP)) {
int data_count = (DATA_LEN - scsi_get_resid(CURRENT_SC)) -
- GETSTCNT();
-
- DPRINTK(debug_datao, DEBUG_LEAD "datao: %d bytes to resend (%d written, %d transferred)\n",
- CMDINFO(CURRENT_SC),
- data_count,
- DATA_LEN - scsi_get_resid(CURRENT_SC),
- GETSTCNT());
+ GETSTCNT();
CMD_INC_RESID(CURRENT_SC, data_count);
data_count -= CURRENT_SC->SCp.ptr -
- SG_ADDRESS(CURRENT_SC->SCp.buffer);
+ SG_ADDRESS(CURRENT_SC->SCp.buffer);
while(data_count>0) {
CURRENT_SC->SCp.buffer--;
CURRENT_SC->SCp.buffers_residual++;
data_count -= CURRENT_SC->SCp.buffer->length;
}
CURRENT_SC->SCp.ptr = SG_ADDRESS(CURRENT_SC->SCp.buffer) -
- data_count;
+ data_count;
CURRENT_SC->SCp.this_residual = CURRENT_SC->SCp.buffer->length +
- data_count;
+ data_count;
}
- DPRINTK(debug_datao, DEBUG_LEAD "datao_end: request_bufflen=%d; resid=%d; stcnt=%d\n",
- CMDINFO(CURRENT_SC),
- scsi_bufflen(CURRENT_SC),
- scsi_get_resid(CURRENT_SC),
- GETSTCNT());
-
SETPORT(SXFRCTL0, CH1|CLRCH1|CLRSTCNT);
SETPORT(SXFRCTL0, CH1);
STATE=rsti;
SETPORT(SCSISEQ,0);
SETPORT(SSTAT1,SCSIRSTI);
- } else if(stat0 & SELDI && PREVSTATE==busfree) {
+ } else if (stat0 & SELDI && PREVSTATE == busfree) {
STATE=seldi;
} else if(stat0 & SELDO && CURRENT_SC && (CURRENT_SC->SCp.phase & selecting)) {
STATE=seldo;
}
if((stat0 & SELDI) && STATE!=seldi && !dataphase) {
- printk(INFO_LEAD "reselection missed?", CMDINFO(CURRENT_SC));
- disp_ports(shpnt);
+ scmd_printk(KERN_INFO, CURRENT_SC, "reselection missed?");
}
if(STATE!=PREVSTATE) {
*/
static void parerr_run(struct Scsi_Host *shpnt)
{
- printk(ERR_LEAD "parity error\n", CMDINFO(CURRENT_SC));
+ scmd_printk(KERN_ERR, CURRENT_SC, "parity error\n");
done(shpnt, DID_PARITY << 16);
}
{
Scsi_Cmnd *ptr;
- printk(KERN_NOTICE "aha152x%d: scsi reset in\n", HOSTNO);
-
+ shost_printk(KERN_NOTICE, shpnt, "scsi reset in\n");
+
ptr=DISCONNECTED_SC;
while(ptr) {
Scsi_Cmnd *next = SCNEXT(ptr);
dataphase=update_state(shpnt);
- DPRINTK(debug_phases, LEAD "start %s %s(%s)\n", CMDINFO(CURRENT_SC), states[STATE].name, states[PREVSTATE].name, states[LASTSTATE].name);
-
/*
* end previous state
*
if(dataphase) {
SETPORT(SSTAT0, REQINIT);
SETPORT(SCSISIG, GETPORT(SCSISIG) & P_MASK);
- SETPORT(SSTAT1, PHASECHG);
+ SETPORT(SSTAT1, PHASECHG);
}
-
+
/*
* enable SPIO mode if previous didn't use it
* and this one does
if(CURRENT_SC)
CURRENT_SC->SCp.phase |= spiordy;
}
-
+
/*
* initialize for new state
*
*/
if(PREVSTATE!=STATE && states[STATE].init)
states[STATE].init(shpnt);
-
+
/*
* handle current state
*
if(states[STATE].run)
states[STATE].run(shpnt);
else
- printk(ERR_LEAD "unexpected state (%x)\n", CMDINFO(CURRENT_SC), STATE);
-
+ scmd_printk(KERN_ERR, CURRENT_SC,
+ "unexpected state (%x)\n", STATE);
+
/*
* setup controller to interrupt on
* the next expected condition and
HOSTDATA(shpnt)->time[STATE] += jiffies-start;
#endif
- DPRINTK(debug_phases, LEAD "end %s %s(%s)\n", CMDINFO(CURRENT_SC), states[STATE].name, states[PREVSTATE].name, states[LASTSTATE].name);
} while(pending);
/*
}
-/*
+/*
* Dump the current driver status and panic
*/
static void aha152x_error(struct Scsi_Host *shpnt, char *msg)
{
- printk(KERN_EMERG "\naha152x%d: %s\n", HOSTNO, msg);
+ shost_printk(KERN_EMERG, shpnt, "%s\n", msg);
show_queues(shpnt);
panic("aha152x panic\n");
}
-/*
- * Display registers of AIC-6260
- */
-static void disp_ports(struct Scsi_Host *shpnt)
-{
-#if defined(AHA152X_DEBUG)
- int s;
-
- printk("\n%s: %s(%s) ",
- CURRENT_SC ? "busy" : "waiting",
- states[STATE].name,
- states[PREVSTATE].name);
-
- s = GETPORT(SCSISEQ);
- printk("SCSISEQ( ");
- if (s & TEMODEO)
- printk("TARGET MODE ");
- if (s & ENSELO)
- printk("SELO ");
- if (s & ENSELI)
- printk("SELI ");
- if (s & ENRESELI)
- printk("RESELI ");
- if (s & ENAUTOATNO)
- printk("AUTOATNO ");
- if (s & ENAUTOATNI)
- printk("AUTOATNI ");
- if (s & ENAUTOATNP)
- printk("AUTOATNP ");
- if (s & SCSIRSTO)
- printk("SCSIRSTO ");
- printk(");");
-
- printk(" SCSISIG(");
- s = GETPORT(SCSISIG);
- switch (s & P_MASK) {
- case P_DATAO:
- printk("DATA OUT");
- break;
- case P_DATAI:
- printk("DATA IN");
- break;
- case P_CMD:
- printk("COMMAND");
- break;
- case P_STATUS:
- printk("STATUS");
- break;
- case P_MSGO:
- printk("MESSAGE OUT");
- break;
- case P_MSGI:
- printk("MESSAGE IN");
- break;
- default:
- printk("*invalid*");
- break;
- }
-
- printk("); ");
-
- printk("INTSTAT (%s); ", TESTHI(DMASTAT, INTSTAT) ? "hi" : "lo");
-
- printk("SSTAT( ");
- s = GETPORT(SSTAT0);
- if (s & TARGET)
- printk("TARGET ");
- if (s & SELDO)
- printk("SELDO ");
- if (s & SELDI)
- printk("SELDI ");
- if (s & SELINGO)
- printk("SELINGO ");
- if (s & SWRAP)
- printk("SWRAP ");
- if (s & SDONE)
- printk("SDONE ");
- if (s & SPIORDY)
- printk("SPIORDY ");
- if (s & DMADONE)
- printk("DMADONE ");
-
- s = GETPORT(SSTAT1);
- if (s & SELTO)
- printk("SELTO ");
- if (s & ATNTARG)
- printk("ATNTARG ");
- if (s & SCSIRSTI)
- printk("SCSIRSTI ");
- if (s & PHASEMIS)
- printk("PHASEMIS ");
- if (s & BUSFREE)
- printk("BUSFREE ");
- if (s & SCSIPERR)
- printk("SCSIPERR ");
- if (s & PHASECHG)
- printk("PHASECHG ");
- if (s & REQINIT)
- printk("REQINIT ");
- printk("); ");
-
-
- printk("SSTAT( ");
-
- s = GETPORT(SSTAT0) & GETPORT(SIMODE0);
-
- if (s & TARGET)
- printk("TARGET ");
- if (s & SELDO)
- printk("SELDO ");
- if (s & SELDI)
- printk("SELDI ");
- if (s & SELINGO)
- printk("SELINGO ");
- if (s & SWRAP)
- printk("SWRAP ");
- if (s & SDONE)
- printk("SDONE ");
- if (s & SPIORDY)
- printk("SPIORDY ");
- if (s & DMADONE)
- printk("DMADONE ");
-
- s = GETPORT(SSTAT1) & GETPORT(SIMODE1);
-
- if (s & SELTO)
- printk("SELTO ");
- if (s & ATNTARG)
- printk("ATNTARG ");
- if (s & SCSIRSTI)
- printk("SCSIRSTI ");
- if (s & PHASEMIS)
- printk("PHASEMIS ");
- if (s & BUSFREE)
- printk("BUSFREE ");
- if (s & SCSIPERR)
- printk("SCSIPERR ");
- if (s & PHASECHG)
- printk("PHASECHG ");
- if (s & REQINIT)
- printk("REQINIT ");
- printk("); ");
-
- printk("SXFRCTL0( ");
-
- s = GETPORT(SXFRCTL0);
- if (s & SCSIEN)
- printk("SCSIEN ");
- if (s & DMAEN)
- printk("DMAEN ");
- if (s & CH1)
- printk("CH1 ");
- if (s & CLRSTCNT)
- printk("CLRSTCNT ");
- if (s & SPIOEN)
- printk("SPIOEN ");
- if (s & CLRCH1)
- printk("CLRCH1 ");
- printk("); ");
-
- printk("SIGNAL( ");
-
- s = GETPORT(SCSISIG);
- if (s & SIG_ATNI)
- printk("ATNI ");
- if (s & SIG_SELI)
- printk("SELI ");
- if (s & SIG_BSYI)
- printk("BSYI ");
- if (s & SIG_REQI)
- printk("REQI ");
- if (s & SIG_ACKI)
- printk("ACKI ");
- printk("); ");
-
- printk("SELID (%02x), ", GETPORT(SELID));
-
- printk("STCNT (%d), ", GETSTCNT());
-
- printk("SSTAT2( ");
-
- s = GETPORT(SSTAT2);
- if (s & SOFFSET)
- printk("SOFFSET ");
- if (s & SEMPTY)
- printk("SEMPTY ");
- if (s & SFULL)
- printk("SFULL ");
- printk("); SFCNT (%d); ", s & (SFULL | SFCNT));
-
- s = GETPORT(SSTAT3);
- printk("SCSICNT (%d), OFFCNT(%d), ", (s & 0xf0) >> 4, s & 0x0f);
-
- printk("SSTAT4( ");
- s = GETPORT(SSTAT4);
- if (s & SYNCERR)
- printk("SYNCERR ");
- if (s & FWERR)
- printk("FWERR ");
- if (s & FRERR)
- printk("FRERR ");
- printk("); ");
-
- printk("DMACNTRL0( ");
- s = GETPORT(DMACNTRL0);
- printk("%s ", s & _8BIT ? "8BIT" : "16BIT");
- printk("%s ", s & DMA ? "DMA" : "PIO");
- printk("%s ", s & WRITE_READ ? "WRITE" : "READ");
- if (s & ENDMA)
- printk("ENDMA ");
- if (s & INTEN)
- printk("INTEN ");
- if (s & RSTFIFO)
- printk("RSTFIFO ");
- if (s & SWINT)
- printk("SWINT ");
- printk("); ");
-
- printk("DMASTAT( ");
- s = GETPORT(DMASTAT);
- if (s & ATDONE)
- printk("ATDONE ");
- if (s & WORDRDY)
- printk("WORDRDY ");
- if (s & DFIFOFULL)
- printk("DFIFOFULL ");
- if (s & DFIFOEMP)
- printk("DFIFOEMP ");
- printk(")\n");
-#endif
-}
-
/*
* display enabled interrupts
*/
static void disp_enintr(struct Scsi_Host *shpnt)
{
- int s;
-
- printk(KERN_DEBUG "enabled interrupts ( ");
-
- s = GETPORT(SIMODE0);
- if (s & ENSELDO)
- printk("ENSELDO ");
- if (s & ENSELDI)
- printk("ENSELDI ");
- if (s & ENSELINGO)
- printk("ENSELINGO ");
- if (s & ENSWRAP)
- printk("ENSWRAP ");
- if (s & ENSDONE)
- printk("ENSDONE ");
- if (s & ENSPIORDY)
- printk("ENSPIORDY ");
- if (s & ENDMADONE)
- printk("ENDMADONE ");
-
- s = GETPORT(SIMODE1);
- if (s & ENSELTIMO)
- printk("ENSELTIMO ");
- if (s & ENATNTARG)
- printk("ENATNTARG ");
- if (s & ENPHASEMIS)
- printk("ENPHASEMIS ");
- if (s & ENBUSFREE)
- printk("ENBUSFREE ");
- if (s & ENSCSIPERR)
- printk("ENSCSIPERR ");
- if (s & ENPHASECHG)
- printk("ENPHASECHG ");
- if (s & ENREQINIT)
- printk("ENREQINIT ");
- printk(")\n");
+ int s0, s1;
+
+ s0 = GETPORT(SIMODE0);
+ s1 = GETPORT(SIMODE1);
+
+ shost_printk(KERN_DEBUG, shpnt,
+ "enabled interrupts (%s%s%s%s%s%s%s%s%s%s%s%s%s%s)\n",
+ (s0 & ENSELDO) ? "ENSELDO " : "",
+ (s0 & ENSELDI) ? "ENSELDI " : "",
+ (s0 & ENSELINGO) ? "ENSELINGO " : "",
+ (s0 & ENSWRAP) ? "ENSWRAP " : "",
+ (s0 & ENSDONE) ? "ENSDONE " : "",
+ (s0 & ENSPIORDY) ? "ENSPIORDY " : "",
+ (s0 & ENDMADONE) ? "ENDMADONE " : "",
+ (s1 & ENSELTIMO) ? "ENSELTIMO " : "",
+ (s1 & ENATNTARG) ? "ENATNTARG " : "",
+ (s1 & ENPHASEMIS) ? "ENPHASEMIS " : "",
+ (s1 & ENBUSFREE) ? "ENBUSFREE " : "",
+ (s1 & ENSCSIPERR) ? "ENSCSIPERR " : "",
+ (s1 & ENPHASECHG) ? "ENPHASECHG " : "",
+ (s1 & ENREQINIT) ? "ENREQINIT " : "");
}
/*
*/
static void show_command(Scsi_Cmnd *ptr)
{
- scmd_printk(KERN_DEBUG, ptr, "%p: cmnd=(", ptr);
-
- __scsi_print_command(ptr->cmnd);
-
- printk(KERN_DEBUG "); request_bufflen=%d; resid=%d; phase |",
- scsi_bufflen(ptr), scsi_get_resid(ptr));
-
- if (ptr->SCp.phase & not_issued)
- printk("not issued|");
- if (ptr->SCp.phase & selecting)
- printk("selecting|");
- if (ptr->SCp.phase & identified)
- printk("identified|");
- if (ptr->SCp.phase & disconnected)
- printk("disconnected|");
- if (ptr->SCp.phase & completed)
- printk("completed|");
- if (ptr->SCp.phase & spiordy)
- printk("spiordy|");
- if (ptr->SCp.phase & syncneg)
- printk("syncneg|");
- if (ptr->SCp.phase & aborted)
- printk("aborted|");
- if (ptr->SCp.phase & resetted)
- printk("resetted|");
- if( SCDATA(ptr) ) {
- printk("; next=0x%p\n", SCNEXT(ptr));
- } else {
- printk("; next=(host scribble NULL)\n");
- }
+ scsi_print_command(ptr);
+ scmd_printk(KERN_DEBUG, ptr,
+ "request_bufflen=%d; resid=%d; "
+ "phase |%s%s%s%s%s%s%s%s%s; next=0x%p",
+ scsi_bufflen(ptr), scsi_get_resid(ptr),
+ (ptr->SCp.phase & not_issued) ? "not issued|" : "",
+ (ptr->SCp.phase & selecting) ? "selecting|" : "",
+ (ptr->SCp.phase & identified) ? "identified|" : "",
+ (ptr->SCp.phase & disconnected) ? "disconnected|" : "",
+ (ptr->SCp.phase & completed) ? "completed|" : "",
+ (ptr->SCp.phase & spiordy) ? "spiordy|" : "",
+ (ptr->SCp.phase & syncneg) ? "syncneg|" : "",
+ (ptr->SCp.phase & aborted) ? "aborted|" : "",
+ (ptr->SCp.phase & resetted) ? "resetted|" : "",
+ (SCDATA(ptr)) ? SCNEXT(ptr) : NULL);
}
/*
for (ptr = DISCONNECTED_SC; ptr; ptr = SCDATA(ptr) ? SCNEXT(ptr) : NULL)
show_command(ptr);
- disp_ports(shpnt);
disp_enintr(shpnt);
}
if(!shpnt || !buffer || length<8 || strncmp("aha152x ", buffer, 8)!=0)
return -EINVAL;
-#if defined(AHA152X_DEBUG)
- if(length>14 && strncmp("debug ", buffer+8, 6)==0) {
- int debug = HOSTDATA(shpnt)->debug;
-
- HOSTDATA(shpnt)->debug = simple_strtoul(buffer+14, NULL, 0);
-
- printk(KERN_INFO "aha152x%d: debugging options set to 0x%04x (were 0x%04x)\n", HOSTNO, HOSTDATA(shpnt)->debug, debug);
- } else
-#endif
#if defined(AHA152X_STAT)
if(length>13 && strncmp("reset", buffer+8, 5)==0) {
int i;
HOSTDATA(shpnt)->time[i]=0;
}
- printk(KERN_INFO "aha152x%d: stats reseted.\n", HOSTNO);
+ shost_printk(KERN_INFO, shpnt, "aha152x: stats reset.\n");
} else
#endif
(((HOSTDATA(shpnt)->syncrate[i] & 0x70) >> 4) + 2) * 50,
HOSTDATA(shpnt)->syncrate[i] & 0x0f);
}
-#if defined(AHA152X_DEBUG)
-#define PDEBUG(flags,txt) \
- if(HOSTDATA(shpnt)->debug & flags) SPRINTF("(%s) ", txt);
-
- SPRINTF("enabled debugging options: ");
-
- PDEBUG(debug_procinfo, "procinfo");
- PDEBUG(debug_queue, "queue");
- PDEBUG(debug_intr, "interrupt");
- PDEBUG(debug_selection, "selection");
- PDEBUG(debug_msgo, "message out");
- PDEBUG(debug_msgi, "message in");
- PDEBUG(debug_status, "status");
- PDEBUG(debug_cmd, "command");
- PDEBUG(debug_datai, "data in");
- PDEBUG(debug_datao, "data out");
- PDEBUG(debug_eh, "eh");
- PDEBUG(debug_locking, "locks");
- PDEBUG(debug_phases, "phases");
-
- SPRINTF("\n");
-#endif
-
SPRINTF("\nqueue status:\n");
DO_LOCK(flags);
if (ISSUE_SC) {
#if defined(AHA152X_STAT)
SPRINTF("statistics:\n"
- "total commands: %d\n"
- "disconnections: %d\n"
+ "total commands: %d\n"
+ "disconnections: %d\n"
"busfree with check condition: %d\n"
"busfree without old command: %d\n"
"busfree without new command: %d\n"
HOSTDATA(shpnt)->busfree_without_any_action);
for(i=0; i<maxstate; i++) {
SPRINTF("%-10s %-12d %-12d %-12ld\n",
- states[i].name,
+ states[i].name,
HOSTDATA(shpnt)->count_trans[i],
HOSTDATA(shpnt)->count[i],
HOSTDATA(shpnt)->time[i]);
setup[setup_count].synchronous = aha152x[5];
setup[setup_count].delay = aha152x[6];
setup[setup_count].ext_trans = aha152x[7];
-#if defined(AHA152X_DEBUG)
- setup[setup_count].debug = aha152x[8];
-#endif
- } else if(io[0]!=0 || irq[0]!=0) {
+ } else if (io[0] != 0 || irq[0] != 0) {
if(io[0]!=0) setup[setup_count].io_port = io[0];
if(irq[0]!=0) setup[setup_count].irq = irq[0];
- setup[setup_count].scsiid = scsiid[0];
- setup[setup_count].reconnect = reconnect[0];
- setup[setup_count].parity = parity[0];
- setup[setup_count].synchronous = sync[0];
- setup[setup_count].delay = delay[0];
- setup[setup_count].ext_trans = exttrans[0];
-#if defined(AHA152X_DEBUG)
- setup[setup_count].debug = debug[0];
-#endif
+ setup[setup_count].scsiid = scsiid[0];
+ setup[setup_count].reconnect = reconnect[0];
+ setup[setup_count].parity = parity[0];
+ setup[setup_count].synchronous = sync[0];
+ setup[setup_count].delay = delay[0];
+ setup[setup_count].ext_trans = exttrans[0];
}
- if (checksetup(&setup[setup_count]))
+ if (checksetup(&setup[setup_count]))
setup_count++;
else
printk(KERN_ERR "aha152x: invalid module params io=0x%x, irq=%d,scsiid=%d,reconnect=%d,parity=%d,sync=%d,delay=%d,exttrans=%d\n",
setup[setup_count].synchronous = aha152x1[5];
setup[setup_count].delay = aha152x1[6];
setup[setup_count].ext_trans = aha152x1[7];
-#if defined(AHA152X_DEBUG)
- setup[setup_count].debug = aha152x1[8];
-#endif
- } else if(io[1]!=0 || irq[1]!=0) {
+ } else if (io[1] != 0 || irq[1] != 0) {
if(io[1]!=0) setup[setup_count].io_port = io[1];
if(irq[1]!=0) setup[setup_count].irq = irq[1];
- setup[setup_count].scsiid = scsiid[1];
- setup[setup_count].reconnect = reconnect[1];
- setup[setup_count].parity = parity[1];
- setup[setup_count].synchronous = sync[1];
- setup[setup_count].delay = delay[1];
- setup[setup_count].ext_trans = exttrans[1];
-#if defined(AHA152X_DEBUG)
- setup[setup_count].debug = debug[1];
-#endif
+ setup[setup_count].scsiid = scsiid[1];
+ setup[setup_count].reconnect = reconnect[1];
+ setup[setup_count].parity = parity[1];
+ setup[setup_count].synchronous = sync[1];
+ setup[setup_count].delay = delay[1];
+ setup[setup_count].ext_trans = exttrans[1];
}
if (checksetup(&setup[setup_count]))
setup_count++;
setup[setup_count].synchronous = 1;
setup[setup_count].delay = DELAY_DEFAULT;
setup[setup_count].ext_trans = 0;
-#if defined(AHA152X_DEBUG)
- setup[setup_count].debug = DEBUG_DEFAULT;
-#endif
#if defined(__ISAPNP__)
pnpdev[setup_count] = dev;
#endif
setup[setup_count].synchronous = conf.cf_syncneg;
setup[setup_count].delay = DELAY_DEFAULT;
setup[setup_count].ext_trans = 0;
-#if defined(AHA152X_DEBUG)
- setup[setup_count].debug = DEBUG_DEFAULT;
-#endif
setup_count++;
}
#if !defined(MODULE)
static int __init aha152x_setup(char *str)
{
-#if defined(AHA152X_DEBUG)
- int ints[11];
-#else
int ints[10];
-#endif
+
get_options(str, ARRAY_SIZE(ints), ints);
if(setup_count>=ARRAY_SIZE(setup)) {
setup[setup_count].synchronous = ints[0] >= 6 ? ints[6] : 1;
setup[setup_count].delay = ints[0] >= 7 ? ints[7] : DELAY_DEFAULT;
setup[setup_count].ext_trans = ints[0] >= 8 ? ints[8] : 0;
-#if defined(AHA152X_DEBUG)
- setup[setup_count].debug = ints[0] >= 9 ? ints[9] : DEBUG_DEFAULT;
- if (ints[0] > 9) {
- printk(KERN_NOTICE "aha152x: usage: aha152x=<IOBASE>[,<IRQ>[,<SCSI ID>"
- "[,<RECONNECT>[,<PARITY>[,<SYNCHRONOUS>[,<DELAY>[,<EXT_TRANS>[,<DEBUG>]]]]]]]]\n");
-#else
if (ints[0] > 8) { /*}*/
printk(KERN_NOTICE "aha152x: usage: aha152x=<IOBASE>[,<IRQ>[,<SCSI ID>"
"[,<RECONNECT>[,<PARITY>[,<SYNCHRONOUS>[,<DELAY>[,<EXT_TRANS>]]]]]]]\n");
-#endif
} else {
setup_count++;
return 0;
* quiet as possible...
*/
- return 0;
+ return SUCCESS;
}
static struct scsi_host_template aha1740_template = {
.slave_configure = ahd_linux_slave_configure,
.target_alloc = ahd_linux_target_alloc,
.target_destroy = ahd_linux_target_destroy,
+ .use_blk_tags = 1,
};
/******************************** Bus DMA *************************************/
switch ((dev->flags & (AHD_DEV_Q_BASIC|AHD_DEV_Q_TAGGED))) {
case AHD_DEV_Q_BASIC:
- scsi_set_tag_type(sdev, MSG_SIMPLE_TASK);
- scsi_activate_tcq(sdev, dev->openings + dev->active);
- break;
case AHD_DEV_Q_TAGGED:
- scsi_set_tag_type(sdev, MSG_ORDERED_TASK);
- scsi_activate_tcq(sdev, dev->openings + dev->active);
+ scsi_change_queue_depth(sdev,
+ dev->openings + dev->active);
break;
default:
/*
* serially on the controller/device. This should
* remove some latency.
*/
- scsi_deactivate_tcq(sdev, 1);
+ scsi_change_queue_depth(sdev, 1);
break;
}
}
}
if ((dev->flags & (AHD_DEV_Q_TAGGED|AHD_DEV_Q_BASIC)) != 0) {
- int msg_bytes;
- uint8_t tag_msgs[2];
-
- msg_bytes = scsi_populate_tag_msg(cmd, tag_msgs);
- if (msg_bytes && tag_msgs[0] != MSG_SIMPLE_TASK) {
- hscb->control |= tag_msgs[0];
- if (tag_msgs[0] == MSG_ORDERED_TASK)
- dev->commands_since_idle_or_otag = 0;
- } else
if (dev->commands_since_idle_or_otag == AHD_OTAG_THRESH
&& (dev->flags & AHD_DEV_Q_TAGGED) != 0) {
hscb->control |= MSG_ORDERED_TASK;
.slave_configure = ahc_linux_slave_configure,
.target_alloc = ahc_linux_target_alloc,
.target_destroy = ahc_linux_target_destroy,
+ .use_blk_tags = 1,
};
/**************************** Tasklet Handler *********************************/
}
switch ((dev->flags & (AHC_DEV_Q_BASIC|AHC_DEV_Q_TAGGED))) {
case AHC_DEV_Q_BASIC:
- scsi_set_tag_type(sdev, MSG_SIMPLE_TAG);
- scsi_activate_tcq(sdev, dev->openings + dev->active);
- break;
case AHC_DEV_Q_TAGGED:
- scsi_set_tag_type(sdev, MSG_ORDERED_TAG);
- scsi_activate_tcq(sdev, dev->openings + dev->active);
- break;
+ scsi_change_queue_depth(sdev,
+ dev->openings + dev->active);
default:
/*
* We allow the OS to queue 2 untagged transactions to
* serially on the controller/device. This should
* remove some latency.
*/
- scsi_deactivate_tcq(sdev, 2);
+ scsi_change_queue_depth(sdev, 2);
break;
}
}
* we are storing a full busy target *lun*
* table in SCB space.
*/
- if (!blk_rq_tagged(cmd->request)
+ if (!(cmd->flags & SCMD_TAGGED)
&& (ahc->features & AHC_SCB_BTT) == 0) {
int target_offset;
}
if ((dev->flags & (AHC_DEV_Q_TAGGED|AHC_DEV_Q_BASIC)) != 0) {
- int msg_bytes;
- uint8_t tag_msgs[2];
-
- msg_bytes = scsi_populate_tag_msg(cmd, tag_msgs);
- if (msg_bytes && tag_msgs[0] != MSG_SIMPLE_TASK) {
- hscb->control |= tag_msgs[0];
- if (tag_msgs[0] == MSG_ORDERED_TASK)
- dev->commands_since_idle_or_otag = 0;
- } else if (dev->commands_since_idle_or_otag == AHC_OTAG_THRESH
+ if (dev->commands_since_idle_or_otag == AHC_OTAG_THRESH
&& (dev->flags & AHC_DEV_Q_TAGGED) != 0) {
hscb->control |= MSG_ORDERED_TASK;
dev->commands_since_idle_or_otag = 0;
void asd_invalidate_edb(struct asd_ascb *ascb, int edb_id);
-int asd_execute_task(struct sas_task *, int num, gfp_t gfp_flags);
+int asd_execute_task(struct sas_task *task, gfp_t gfp_flags);
void asd_set_dmamode(struct domain_device *dev);
* Case A: we can send the whole batch at once. Increment "pending"
* in the beginning of this function, when it is checked, in order to
* eliminate races when this function is called by multiple processes.
- * Case B: should never happen if the managing layer considers
- * lldd_queue_size.
+ * Case B: should never happen.
*/
int asd_post_ascb_list(struct asd_ha_struct *asd_ha, struct asd_ascb *ascb,
int num)
"\tEnable(1) or disable(0) using PCI MSI.\n"
"\tDefault: 0");
-static int lldd_max_execute_num = 0;
-module_param_named(collector, lldd_max_execute_num, int, S_IRUGO);
-MODULE_PARM_DESC(collector, "\n"
- "\tIf greater than one, tells the SAS Layer to run in Task Collector\n"
- "\tMode. If 1 or 0, tells the SAS Layer to run in Direct Mode.\n"
- "\tThe aic94xx SAS LLDD supports both modes.\n"
- "\tDefault: 0 (Direct Mode).\n");
-
static struct scsi_transport_template *aic94xx_transport_template;
static int asd_scan_finished(struct Scsi_Host *, unsigned long);
static void asd_scan_start(struct Scsi_Host *);
.eh_bus_reset_handler = sas_eh_bus_reset_handler,
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
+ .use_blk_tags = 1,
+ .track_queue_depth = 1,
};
static int asd_map_memio(struct asd_ha_struct *asd_ha)
asd_ha->sas_ha.sas_port= sas_ports;
asd_ha->sas_ha.num_phys= ASD_MAX_PHYS;
- asd_ha->sas_ha.lldd_queue_size = asd_ha->seq.can_queue;
- asd_ha->sas_ha.lldd_max_execute_num = lldd_max_execute_num;
-
return sas_register_ha(&asd_ha->sas_ha);
}
return res;
}
-int asd_execute_task(struct sas_task *task, const int num,
- gfp_t gfp_flags)
+int asd_execute_task(struct sas_task *task, gfp_t gfp_flags)
{
int res = 0;
LIST_HEAD(alist);
struct asd_ha_struct *asd_ha = task->dev->port->ha->lldd_ha;
unsigned long flags;
- res = asd_can_queue(asd_ha, num);
+ res = asd_can_queue(asd_ha, 1);
if (res)
return res;
- res = num;
+ res = 1;
ascb = asd_ascb_alloc_list(asd_ha, &res, gfp_flags);
if (res) {
res = -ENOMEM;
list_for_each_entry(a, &alist, list) {
a->uldd_task = t;
t->lldd_task = a;
- t = list_entry(t->list.next, struct sas_task, list);
+ break;
}
list_for_each_entry(a, &alist, list) {
t = a->uldd_task;
}
list_del_init(&alist);
- res = asd_post_ascb_list(asd_ha, ascb, num);
+ res = asd_post_ascb_list(asd_ha, ascb, 1);
if (unlikely(res)) {
a = NULL;
__list_add(&alist, ascb->list.prev, &ascb->list);
out_err:
if (ascb)
asd_ascb_free_list(ascb);
- asd_can_dequeue(asd_ha, num);
+ asd_can_dequeue(asd_ha, 1);
return res;
}
--- /dev/null
+/*
+ * AMD am53c974 driver.
+ * Copyright (c) 2014 Hannes Reinecke, SUSE Linux GmbH
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+
+#include <scsi/scsi_host.h>
+
+#include "esp_scsi.h"
+
+#define DRV_MODULE_NAME "am53c974"
+#define DRV_MODULE_VERSION "1.00"
+
+static bool am53c974_debug;
+static bool am53c974_fenab = true;
+
+#define esp_dma_log(f, a...) \
+ do { \
+ if (am53c974_debug) \
+ shost_printk(KERN_DEBUG, esp->host, f, ##a); \
+ } while (0)
+
+#define ESP_DMA_CMD 0x10
+#define ESP_DMA_STC 0x11
+#define ESP_DMA_SPA 0x12
+#define ESP_DMA_WBC 0x13
+#define ESP_DMA_WAC 0x14
+#define ESP_DMA_STATUS 0x15
+#define ESP_DMA_SMDLA 0x16
+#define ESP_DMA_WMAC 0x17
+
+#define ESP_DMA_CMD_IDLE 0x00
+#define ESP_DMA_CMD_BLAST 0x01
+#define ESP_DMA_CMD_ABORT 0x02
+#define ESP_DMA_CMD_START 0x03
+#define ESP_DMA_CMD_MASK 0x03
+#define ESP_DMA_CMD_DIAG 0x04
+#define ESP_DMA_CMD_MDL 0x10
+#define ESP_DMA_CMD_INTE_P 0x20
+#define ESP_DMA_CMD_INTE_D 0x40
+#define ESP_DMA_CMD_DIR 0x80
+
+#define ESP_DMA_STAT_PWDN 0x01
+#define ESP_DMA_STAT_ERROR 0x02
+#define ESP_DMA_STAT_ABORT 0x04
+#define ESP_DMA_STAT_DONE 0x08
+#define ESP_DMA_STAT_SCSIINT 0x10
+#define ESP_DMA_STAT_BCMPLT 0x20
+
+/* EEPROM is accessed with 16-bit values */
+#define DC390_EEPROM_READ 0x80
+#define DC390_EEPROM_LEN 0x40
+
+/*
+ * DC390 EEPROM
+ *
+ * 8 * 4 bytes of per-device options
+ * followed by HBA specific options
+ */
+
+/* Per-device options */
+#define DC390_EE_MODE1 0x00
+#define DC390_EE_SPEED 0x01
+
+/* HBA-specific options */
+#define DC390_EE_ADAPT_SCSI_ID 0x40
+#define DC390_EE_MODE2 0x41
+#define DC390_EE_DELAY 0x42
+#define DC390_EE_TAG_CMD_NUM 0x43
+
+#define DC390_EE_MODE1_PARITY_CHK 0x01
+#define DC390_EE_MODE1_SYNC_NEGO 0x02
+#define DC390_EE_MODE1_EN_DISC 0x04
+#define DC390_EE_MODE1_SEND_START 0x08
+#define DC390_EE_MODE1_TCQ 0x10
+
+#define DC390_EE_MODE2_MORE_2DRV 0x01
+#define DC390_EE_MODE2_GREATER_1G 0x02
+#define DC390_EE_MODE2_RST_SCSI_BUS 0x04
+#define DC390_EE_MODE2_ACTIVE_NEGATION 0x08
+#define DC390_EE_MODE2_NO_SEEK 0x10
+#define DC390_EE_MODE2_LUN_CHECK 0x20
+
+struct pci_esp_priv {
+ struct esp *esp;
+ u8 dma_status;
+};
+
+static void pci_esp_dma_drain(struct esp *esp);
+
+static inline struct pci_esp_priv *pci_esp_get_priv(struct esp *esp)
+{
+ struct pci_dev *pdev = esp->dev;
+
+ return pci_get_drvdata(pdev);
+}
+
+static void pci_esp_write8(struct esp *esp, u8 val, unsigned long reg)
+{
+ iowrite8(val, esp->regs + (reg * 4UL));
+}
+
+static u8 pci_esp_read8(struct esp *esp, unsigned long reg)
+{
+ return ioread8(esp->regs + (reg * 4UL));
+}
+
+static void pci_esp_write32(struct esp *esp, u32 val, unsigned long reg)
+{
+ return iowrite32(val, esp->regs + (reg * 4UL));
+}
+
+static dma_addr_t pci_esp_map_single(struct esp *esp, void *buf,
+ size_t sz, int dir)
+{
+ return pci_map_single(esp->dev, buf, sz, dir);
+}
+
+static int pci_esp_map_sg(struct esp *esp, struct scatterlist *sg,
+ int num_sg, int dir)
+{
+ return pci_map_sg(esp->dev, sg, num_sg, dir);
+}
+
+static void pci_esp_unmap_single(struct esp *esp, dma_addr_t addr,
+ size_t sz, int dir)
+{
+ pci_unmap_single(esp->dev, addr, sz, dir);
+}
+
+static void pci_esp_unmap_sg(struct esp *esp, struct scatterlist *sg,
+ int num_sg, int dir)
+{
+ pci_unmap_sg(esp->dev, sg, num_sg, dir);
+}
+
+static int pci_esp_irq_pending(struct esp *esp)
+{
+ struct pci_esp_priv *pep = pci_esp_get_priv(esp);
+
+ pep->dma_status = pci_esp_read8(esp, ESP_DMA_STATUS);
+ esp_dma_log("dma intr dreg[%02x]\n", pep->dma_status);
+
+ if (pep->dma_status & (ESP_DMA_STAT_ERROR |
+ ESP_DMA_STAT_ABORT |
+ ESP_DMA_STAT_DONE |
+ ESP_DMA_STAT_SCSIINT))
+ return 1;
+
+ return 0;
+}
+
+static void pci_esp_reset_dma(struct esp *esp)
+{
+ /* Nothing to do ? */
+}
+
+static void pci_esp_dma_drain(struct esp *esp)
+{
+ u8 resid;
+ int lim = 1000;
+
+
+ if ((esp->sreg & ESP_STAT_PMASK) == ESP_DOP ||
+ (esp->sreg & ESP_STAT_PMASK) == ESP_DIP)
+ /* Data-In or Data-Out, nothing to be done */
+ return;
+
+ while (--lim > 0) {
+ resid = pci_esp_read8(esp, ESP_FFLAGS) & ESP_FF_FBYTES;
+ if (resid <= 1)
+ break;
+ cpu_relax();
+ }
+ if (resid > 1) {
+ /* FIFO not cleared */
+ shost_printk(KERN_INFO, esp->host,
+ "FIFO not cleared, %d bytes left\n",
+ resid);
+ }
+
+ /*
+ * When there is a residual BCMPLT will never be set
+ * (obviously). But we still have to issue the BLAST
+ * command, otherwise the data will not being transferred.
+ * But we'll never know when the BLAST operation is
+ * finished. So check for some time and give up eventually.
+ */
+ lim = 1000;
+ pci_esp_write8(esp, ESP_DMA_CMD_DIR | ESP_DMA_CMD_BLAST, ESP_DMA_CMD);
+ while (pci_esp_read8(esp, ESP_DMA_STATUS) & ESP_DMA_STAT_BCMPLT) {
+ if (--lim == 0)
+ break;
+ cpu_relax();
+ }
+ pci_esp_write8(esp, ESP_DMA_CMD_DIR | ESP_DMA_CMD_IDLE, ESP_DMA_CMD);
+ esp_dma_log("DMA blast done (%d tries, %d bytes left)\n", lim, resid);
+ /* BLAST residual handling is currently untested */
+ if (WARN_ON_ONCE(resid == 1)) {
+ struct esp_cmd_entry *ent = esp->active_cmd;
+
+ ent->flags |= ESP_CMD_FLAG_RESIDUAL;
+ }
+}
+
+static void pci_esp_dma_invalidate(struct esp *esp)
+{
+ struct pci_esp_priv *pep = pci_esp_get_priv(esp);
+
+ esp_dma_log("invalidate DMA\n");
+
+ pci_esp_write8(esp, ESP_DMA_CMD_IDLE, ESP_DMA_CMD);
+ pep->dma_status = 0;
+}
+
+static int pci_esp_dma_error(struct esp *esp)
+{
+ struct pci_esp_priv *pep = pci_esp_get_priv(esp);
+
+ if (pep->dma_status & ESP_DMA_STAT_ERROR) {
+ u8 dma_cmd = pci_esp_read8(esp, ESP_DMA_CMD);
+
+ if ((dma_cmd & ESP_DMA_CMD_MASK) == ESP_DMA_CMD_START)
+ pci_esp_write8(esp, ESP_DMA_CMD_ABORT, ESP_DMA_CMD);
+
+ return 1;
+ }
+ if (pep->dma_status & ESP_DMA_STAT_ABORT) {
+ pci_esp_write8(esp, ESP_DMA_CMD_IDLE, ESP_DMA_CMD);
+ pep->dma_status = pci_esp_read8(esp, ESP_DMA_CMD);
+ return 1;
+ }
+ return 0;
+}
+
+static void pci_esp_send_dma_cmd(struct esp *esp, u32 addr, u32 esp_count,
+ u32 dma_count, int write, u8 cmd)
+{
+ struct pci_esp_priv *pep = pci_esp_get_priv(esp);
+ u32 val = 0;
+
+ BUG_ON(!(cmd & ESP_CMD_DMA));
+
+ pep->dma_status = 0;
+
+ /* Set DMA engine to IDLE */
+ if (write)
+ /* DMA write direction logic is inverted */
+ val |= ESP_DMA_CMD_DIR;
+ pci_esp_write8(esp, ESP_DMA_CMD_IDLE | val, ESP_DMA_CMD);
+
+ pci_esp_write8(esp, (esp_count >> 0) & 0xff, ESP_TCLOW);
+ pci_esp_write8(esp, (esp_count >> 8) & 0xff, ESP_TCMED);
+ if (esp->config2 & ESP_CONFIG2_FENAB)
+ pci_esp_write8(esp, (esp_count >> 16) & 0xff, ESP_TCHI);
+
+ pci_esp_write32(esp, esp_count, ESP_DMA_STC);
+ pci_esp_write32(esp, addr, ESP_DMA_SPA);
+
+ esp_dma_log("start dma addr[%x] count[%d:%d]\n",
+ addr, esp_count, dma_count);
+
+ scsi_esp_cmd(esp, cmd);
+ /* Send DMA Start command */
+ pci_esp_write8(esp, ESP_DMA_CMD_START | val, ESP_DMA_CMD);
+}
+
+static u32 pci_esp_dma_length_limit(struct esp *esp, u32 dma_addr, u32 dma_len)
+{
+ int dma_limit = 16;
+ u32 base, end;
+
+ /*
+ * If CONFIG2_FENAB is set we can
+ * handle up to 24 bit addresses
+ */
+ if (esp->config2 & ESP_CONFIG2_FENAB)
+ dma_limit = 24;
+
+ if (dma_len > (1U << dma_limit))
+ dma_len = (1U << dma_limit);
+
+ /*
+ * Prevent crossing a 24-bit address boundary.
+ */
+ base = dma_addr & ((1U << 24) - 1U);
+ end = base + dma_len;
+ if (end > (1U << 24))
+ end = (1U <<24);
+ dma_len = end - base;
+
+ return dma_len;
+}
+
+static const struct esp_driver_ops pci_esp_ops = {
+ .esp_write8 = pci_esp_write8,
+ .esp_read8 = pci_esp_read8,
+ .map_single = pci_esp_map_single,
+ .map_sg = pci_esp_map_sg,
+ .unmap_single = pci_esp_unmap_single,
+ .unmap_sg = pci_esp_unmap_sg,
+ .irq_pending = pci_esp_irq_pending,
+ .reset_dma = pci_esp_reset_dma,
+ .dma_drain = pci_esp_dma_drain,
+ .dma_invalidate = pci_esp_dma_invalidate,
+ .send_dma_cmd = pci_esp_send_dma_cmd,
+ .dma_error = pci_esp_dma_error,
+ .dma_length_limit = pci_esp_dma_length_limit,
+};
+
+/*
+ * Read DC-390 eeprom
+ */
+static void dc390_eeprom_prepare_read(struct pci_dev *pdev, u8 cmd)
+{
+ u8 carry_flag = 1, j = 0x80, bval;
+ int i;
+
+ for (i = 0; i < 9; i++) {
+ if (carry_flag) {
+ pci_write_config_byte(pdev, 0x80, 0x40);
+ bval = 0xc0;
+ } else
+ bval = 0x80;
+
+ udelay(160);
+ pci_write_config_byte(pdev, 0x80, bval);
+ udelay(160);
+ pci_write_config_byte(pdev, 0x80, 0);
+ udelay(160);
+
+ carry_flag = (cmd & j) ? 1 : 0;
+ j >>= 1;
+ }
+}
+
+static u16 dc390_eeprom_get_data(struct pci_dev *pdev)
+{
+ int i;
+ u16 wval = 0;
+ u8 bval;
+
+ for (i = 0; i < 16; i++) {
+ wval <<= 1;
+
+ pci_write_config_byte(pdev, 0x80, 0x80);
+ udelay(160);
+ pci_write_config_byte(pdev, 0x80, 0x40);
+ udelay(160);
+ pci_read_config_byte(pdev, 0x00, &bval);
+
+ if (bval == 0x22)
+ wval |= 1;
+ }
+
+ return wval;
+}
+
+static void dc390_read_eeprom(struct pci_dev *pdev, u16 *ptr)
+{
+ u8 cmd = DC390_EEPROM_READ, i;
+
+ for (i = 0; i < DC390_EEPROM_LEN; i++) {
+ pci_write_config_byte(pdev, 0xc0, 0);
+ udelay(160);
+
+ dc390_eeprom_prepare_read(pdev, cmd++);
+ *ptr++ = dc390_eeprom_get_data(pdev);
+
+ pci_write_config_byte(pdev, 0x80, 0);
+ pci_write_config_byte(pdev, 0x80, 0);
+ udelay(160);
+ }
+}
+
+static void dc390_check_eeprom(struct esp *esp)
+{
+ u8 EEbuf[128];
+ u16 *ptr = (u16 *)EEbuf, wval = 0;
+ int i;
+
+ dc390_read_eeprom((struct pci_dev *)esp->dev, ptr);
+
+ for (i = 0; i < DC390_EEPROM_LEN; i++, ptr++)
+ wval += *ptr;
+
+ /* no Tekram EEprom found */
+ if (wval != 0x1234) {
+ struct pci_dev *pdev = esp->dev;
+ dev_printk(KERN_INFO, &pdev->dev,
+ "No valid Tekram EEprom found\n");
+ return;
+ }
+ esp->scsi_id = EEbuf[DC390_EE_ADAPT_SCSI_ID];
+ esp->num_tags = 2 << EEbuf[DC390_EE_TAG_CMD_NUM];
+ if (EEbuf[DC390_EE_MODE2] & DC390_EE_MODE2_ACTIVE_NEGATION)
+ esp->config4 |= ESP_CONFIG4_RADE | ESP_CONFIG4_RAE;
+}
+
+static int pci_esp_probe_one(struct pci_dev *pdev,
+ const struct pci_device_id *id)
+{
+ struct scsi_host_template *hostt = &scsi_esp_template;
+ int err = -ENODEV;
+ struct Scsi_Host *shost;
+ struct esp *esp;
+ struct pci_esp_priv *pep;
+
+ if (pci_enable_device(pdev)) {
+ dev_printk(KERN_INFO, &pdev->dev, "cannot enable device\n");
+ return -ENODEV;
+ }
+
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "failed to set 32bit DMA mask\n");
+ goto fail_disable_device;
+ }
+
+ shost = scsi_host_alloc(hostt, sizeof(struct esp));
+ if (!shost) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "failed to allocate scsi host\n");
+ err = -ENOMEM;
+ goto fail_disable_device;
+ }
+
+ pep = kzalloc(sizeof(struct pci_esp_priv), GFP_KERNEL);
+ if (!pep) {
+ dev_printk(KERN_INFO, &pdev->dev,
+ "failed to allocate esp_priv\n");
+ err = -ENOMEM;
+ goto fail_host_alloc;
+ }
+
+ esp = shost_priv(shost);
+ esp->host = shost;
+ esp->dev = pdev;
+ esp->ops = &pci_esp_ops;
+ /*
+ * The am53c974 HBA has a design flaw of generating
+ * spurious DMA completion interrupts when using
+ * DMA for command submission.
+ */
+ esp->flags |= ESP_FLAG_USE_FIFO;
+ /*
+ * Enable CONFIG2_FENAB to allow for large DMA transfers
+ */
+ if (am53c974_fenab)
+ esp->config2 |= ESP_CONFIG2_FENAB;
+
+ pep->esp = esp;
+
+ if (pci_request_regions(pdev, DRV_MODULE_NAME)) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "pci memory selection failed\n");
+ goto fail_priv_alloc;
+ }
+
+ esp->regs = pci_iomap(pdev, 0, pci_resource_len(pdev, 0));
+ if (!esp->regs) {
+ dev_printk(KERN_ERR, &pdev->dev, "pci I/O map failed\n");
+ err = -EINVAL;
+ goto fail_release_regions;
+ }
+ esp->dma_regs = esp->regs;
+
+ pci_set_master(pdev);
+
+ esp->command_block = pci_alloc_consistent(pdev, 16,
+ &esp->command_block_dma);
+ if (!esp->command_block) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "failed to allocate command block\n");
+ err = -ENOMEM;
+ goto fail_unmap_regs;
+ }
+
+ err = request_irq(pdev->irq, scsi_esp_intr, IRQF_SHARED,
+ DRV_MODULE_NAME, esp);
+ if (err < 0) {
+ dev_printk(KERN_ERR, &pdev->dev, "failed to register IRQ\n");
+ goto fail_unmap_command_block;
+ }
+
+ esp->scsi_id = 7;
+ dc390_check_eeprom(esp);
+
+ shost->this_id = esp->scsi_id;
+ shost->max_id = 8;
+ shost->irq = pdev->irq;
+ shost->io_port = pci_resource_start(pdev, 0);
+ shost->n_io_port = pci_resource_len(pdev, 0);
+ shost->unique_id = shost->io_port;
+ esp->scsi_id_mask = (1 << esp->scsi_id);
+ /* Assume 40MHz clock */
+ esp->cfreq = 40000000;
+
+ pci_set_drvdata(pdev, pep);
+
+ err = scsi_esp_register(esp, &pdev->dev);
+ if (err)
+ goto fail_free_irq;
+
+ return 0;
+
+fail_free_irq:
+ free_irq(pdev->irq, esp);
+fail_unmap_command_block:
+ pci_free_consistent(pdev, 16, esp->command_block,
+ esp->command_block_dma);
+fail_unmap_regs:
+ pci_iounmap(pdev, esp->regs);
+fail_release_regions:
+ pci_release_regions(pdev);
+fail_priv_alloc:
+ kfree(pep);
+fail_host_alloc:
+ scsi_host_put(shost);
+fail_disable_device:
+ pci_disable_device(pdev);
+
+ return err;
+}
+
+static void pci_esp_remove_one(struct pci_dev *pdev)
+{
+ struct pci_esp_priv *pep = pci_get_drvdata(pdev);
+ struct esp *esp = pep->esp;
+
+ scsi_esp_unregister(esp);
+ free_irq(pdev->irq, esp);
+ pci_free_consistent(pdev, 16, esp->command_block,
+ esp->command_block_dma);
+ pci_iounmap(pdev, esp->regs);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ kfree(pep);
+
+ scsi_host_put(esp->host);
+}
+
+static struct pci_device_id am53c974_pci_tbl[] = {
+ { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SCSI,
+ PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
+ { }
+};
+MODULE_DEVICE_TABLE(pci, am53c974_pci_tbl);
+
+static struct pci_driver am53c974_driver = {
+ .name = DRV_MODULE_NAME,
+ .id_table = am53c974_pci_tbl,
+ .probe = pci_esp_probe_one,
+ .remove = pci_esp_remove_one,
+};
+
+static int __init am53c974_module_init(void)
+{
+ return pci_register_driver(&am53c974_driver);
+}
+
+static void __exit am53c974_module_exit(void)
+{
+ pci_unregister_driver(&am53c974_driver);
+}
+
+MODULE_DESCRIPTION("AM53C974 SCSI driver");
+MODULE_AUTHOR("Hannes Reinecke <hare@suse.de>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(DRV_MODULE_VERSION);
+MODULE_ALIAS("tmscsim");
+
+module_param(am53c974_debug, bool, 0644);
+MODULE_PARM_DESC(am53c974_debug, "Enable debugging");
+
+module_param(am53c974_fenab, bool, 0444);
+MODULE_PARM_DESC(am53c974_fenab, "Enable 24-bit DMA transfer sizes");
+
+module_init(am53c974_module_init);
+module_exit(am53c974_module_exit);
static const char *arcmsr_info(struct Scsi_Host *);
static irqreturn_t arcmsr_interrupt(struct AdapterControlBlock *acb);
static void arcmsr_free_irq(struct pci_dev *, struct AdapterControlBlock *);
-static int arcmsr_adjust_disk_queue_depth(struct scsi_device *sdev,
- int queue_depth, int reason)
+static int arcmsr_adjust_disk_queue_depth(struct scsi_device *sdev, int queue_depth)
{
- if (reason != SCSI_QDEPTH_DEFAULT)
- return -EOPNOTSUPP;
-
if (queue_depth > ARCMSR_MAX_CMD_PERLUN)
queue_depth = ARCMSR_MAX_CMD_PERLUN;
- scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, queue_depth);
- return queue_depth;
+ return scsi_change_queue_depth(sdev, queue_depth);
}
static struct scsi_host_template arcmsr_scsi_host_template = {
break;
default:
- printk(KERN_ERR "scsi%d.H: incomplete data transfer detected: result=%08X command=",
- host->host->host_no, SCpnt->result);
- __scsi_print_command(SCpnt->cmnd);
+ scmd_printk(KERN_ERR, SCpnt,
+ "incomplete data transfer detected: "
+ "result=%08X", SCpnt->result);
+ scsi_print_command(SCpnt);
acornscsi_dumpdma(host, "done");
- acornscsi_dumplog(host, SCpnt->device->id);
- SCpnt->result &= 0xffff;
- SCpnt->result |= DID_ERROR << 16;
+ acornscsi_dumplog(host, SCpnt->device->id);
+ set_host_byte(SCpnt, DID_ERROR);
}
}
}
#include <asm/ecard.h>
#include <asm/io.h>
-#include "../scsi.h"
#include <scsi/scsi_host.h>
#include <scsi/scsicam.h>
-#define AUTOSENSE
#define PSEUDO_DMA
-#define CUMANASCSI_PUBLIC_RELEASE 1
-
#define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata)
#define NCR5380_local_declare() struct Scsi_Host *_instance
#define NCR5380_setup(instance) _instance = instance
#define NCR5380_write(reg, value) cumanascsi_write(_instance, reg, value)
#define NCR5380_intr cumanascsi_intr
#define NCR5380_queue_command cumanascsi_queue_command
+#define NCR5380_info cumanascsi_info
#define NCR5380_implementation_fields \
unsigned ctrl; \
{
}
-const char *cumanascsi_info(struct Scsi_Host *spnt)
-{
- return "";
-}
-
#define CTRL 0x16fc
#define STAT 0x2004
#define L(v) (((v)<<16)|((v) & 0x0000ffff))
goto out_unmap;
}
- printk("scsi%d: at port 0x%08lx irq %d",
- host->host_no, host->io_port, host->irq);
- printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
- host->can_queue, host->cmd_per_lun, CUMANASCSI_PUBLIC_RELEASE);
- printk("\nscsi%d:", host->host_no);
- NCR5380_print_options(host);
- printk("\n");
-
ret = scsi_add_host(host, &ec->dev);
if (ret)
goto out_free_irq;
fas216_do_log(info, '0' + SCpnt->device->id, fmt, args);
va_end(args);
- printk(" CDB: ");
- __scsi_print_command(SCpnt->cmnd);
+ scsi_print_command(SCpnt);
}
static void
break;
default:
- printk(KERN_ERR "scsi%d.%c: incomplete data transfer "
- "detected: res=%08X ptr=%p len=%X CDB: ",
- info->host->host_no, '0' + SCpnt->device->id,
- SCpnt->result, info->scsi.SCp.ptr,
- info->scsi.SCp.this_residual);
- __scsi_print_command(SCpnt->cmnd);
- SCpnt->result &= ~(255 << 16);
- SCpnt->result |= DID_BAD_TARGET << 16;
+ scmd_printk(KERN_ERR, SCpnt,
+ "incomplete data transfer detected: res=%08X ptr=%p len=%X\n",
+ SCpnt->result, info->scsi.SCp.ptr,
+ info->scsi.SCp.this_residual);
+ scsi_print_command(SCpnt);
+ set_host_byte(SCpnt, DID_ERROR);
goto request_sense;
}
}
* to transfer, we should not have a valid pointer.
*/
if (info->scsi.SCp.ptr && info->scsi.SCp.this_residual == 0) {
- printk("scsi%d.%c: zero bytes left to transfer, but "
- "buffer pointer still valid: ptr=%p len=%08x CDB: ",
- info->host->host_no, '0' + SCpnt->device->id,
- info->scsi.SCp.ptr, info->scsi.SCp.this_residual);
+ scmd_printk(KERN_INFO, SCpnt,
+ "zero bytes left to transfer, but buffer pointer still valid: ptr=%p len=%08x\n",
+ info->scsi.SCp.ptr, info->scsi.SCp.this_residual);
info->scsi.SCp.ptr = NULL;
- __scsi_print_command(SCpnt->cmnd);
+ scsi_print_command(SCpnt);
}
/*
info->stats.aborts += 1;
- printk(KERN_WARNING "scsi%d: abort command ", info->host->host_no);
- __scsi_print_command(SCpnt->cmnd);
+ scmd_printk(KERN_WARNING, SCpnt, "abort command\n");
print_debug_list();
fas216_dumpstate(info);
- printk(KERN_WARNING "scsi%d: abort %p ", info->host->host_no, SCpnt);
-
switch (fas216_find_command(info, SCpnt)) {
/*
* We found the command, and cleared it out. Either
* target, or the busylun bit is not set.
*/
case res_success:
- printk("success\n");
+ scmd_printk(KERN_WARNING, SCpnt, "abort %p success\n", SCpnt);
result = SUCCESS;
break;
* if the bus is free.
*/
case res_hw_abort:
-
/*
* We are unable to abort the command for some reason.
*/
default:
case res_failed:
- printk("failed\n");
+ scmd_printk(KERN_WARNING, SCpnt, "abort %p failed\n", SCpnt);
break;
}
fas216_checkmagic(info);
- printk("scsi%d.%c: %s: resetting host\n",
- info->host->host_no, '0' + SCpnt->device->id, __func__);
+ fas216_log(info, LOG_ERROR, "resetting host");
/*
* Reset the SCSI chip.
#include <asm/ecard.h>
#include <asm/io.h>
-#include "../scsi.h"
#include <scsi/scsi_host.h>
-#define AUTOSENSE
/*#define PSEUDO_DMA*/
-
-#define OAKSCSI_PUBLIC_RELEASE 1
#define DONT_USE_INTR
#define priv(host) ((struct NCR5380_hostdata *)(host)->hostdata)
#define NCR5380_read(reg) readb(_base + ((reg) << 2))
#define NCR5380_write(reg, value) writeb(value, _base + ((reg) << 2))
-#define NCR5380_intr oakscsi_intr
#define NCR5380_queue_command oakscsi_queue_command
+#define NCR5380_info oakscsi_info
#define NCR5380_show_info oakscsi_show_info
-#define NCR5380_write_info oakscsi_write_info
#define NCR5380_implementation_fields \
void __iomem *base
#undef START_DMA_INITIATOR_RECEIVE_REG
#define START_DMA_INITIATOR_RECEIVE_REG (128 + 7)
-const char * oakscsi_info (struct Scsi_Host *spnt)
-{
- return "";
-}
-
#define STAT ((128 + 16) << 2)
#define DATA ((128 + 8) << 2)
static struct scsi_host_template oakscsi_template = {
.module = THIS_MODULE,
.show_info = oakscsi_show_info,
- .write_info = oakscsi_write_info,
.name = "Oak 16-bit SCSI",
.info = oakscsi_info,
.queuecommand = oakscsi_queue_command,
goto unreg;
}
- host->irq = IRQ_NONE;
+ host->irq = NO_IRQ;
host->n_io_port = 255;
NCR5380_init(host, 0);
- printk("scsi%d: at port 0x%08lx irqs disabled",
- host->host_no, host->io_port);
- printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
- host->can_queue, host->cmd_per_lun, OAKSCSI_PUBLIC_RELEASE);
- printk("\nscsi%d:", host->host_no);
- NCR5380_print_options(host);
- printk("\n");
-
ret = scsi_add_host(host, &ec->dev);
if (ret)
goto out_unmap;
* drew@colorado.edu
* +1 (303) 666-5836
*
- * DISTRIBUTION RELEASE 6.
- *
* For more information, please consult
*
* NCR 5380 Family
* 1. Test linked command handling code after Eric is ready with
* the high level code.
*/
+
+/* Adapted for the sun3 by Sam Creasey. */
+
#include <scsi/scsi_dbg.h>
#include <scsi/scsi_transport_spi.h>
/*
* Design
- * Issues :
- *
- * The other Linux SCSI drivers were written when Linux was Intel PC-only,
- * and specifically for each board rather than each chip. This makes their
- * adaptation to platforms like the Mac (Some of which use NCR5380's)
- * more difficult than it has to be.
*
- * Also, many of the SCSI drivers were written before the command queuing
- * routines were implemented, meaning their implementations of queued
- * commands were hacked on rather than designed in from the start.
- *
- * When I designed the Linux SCSI drivers I figured that
- * while having two different SCSI boards in a system might be useful
- * for debugging things, two of the same type wouldn't be used.
- * Well, I was wrong and a number of users have mailed me about running
- * multiple high-performance SCSI boards in a server.
- *
- * Finally, when I get questions from users, I have no idea what
- * revision of my driver they are running.
- *
- * This driver attempts to address these problems :
* This is a generic 5380 driver. To use it on a different platform,
* one simply writes appropriate system specific macros (ie, data
* transfer - some PC's will use the I/O bus, 68K's must use
* allowing multiple commands to propagate all the way to a SCSI-II device
* while a command is already executing.
*
- * To solve the multiple-boards-in-the-same-system problem,
- * there is a separate instance structure for each instance
- * of a 5380 in the system. So, multiple NCR5380 drivers will
- * be able to coexist with appropriate changes to the high level
- * SCSI code.
- *
- * A NCR5380_PUBLIC_REVISION macro is provided, with the release
- * number (updated for each public release) printed by the
- * NCR5380_print_options command, which should be called from the
- * wrapper detect function, so that I know what release of the driver
- * users are using.
*
* Issues specific to the NCR5380 :
*
* Architecture :
*
* At the heart of the design is a coroutine, NCR5380_main,
- * which is started when not running by the interrupt handler,
- * timer, and queue command function. It attempts to establish
- * I_T_L or I_T_L_Q nexuses by removing the commands from the
- * issue queue and calling NCR5380_select() if a nexus
- * is not established.
+ * which is started from a workqueue for each NCR5380 host in the
+ * system. It attempts to establish I_T_L or I_T_L_Q nexuses by
+ * removing the commands from the issue queue and calling
+ * NCR5380_select() if a nexus is not established.
*
* Once a nexus is established, the NCR5380_information_transfer()
* phase goes through the various phases as instructed by the target.
* if the target goes into MSG IN and sends a DISCONNECT message,
* the command structure is placed into the per instance disconnected
- * queue, and NCR5380_main tries to find more work. If USLEEP
- * was defined, and the target is idle for too long, the system
- * will try to sleep.
+ * queue, and NCR5380_main tries to find more work. If the target is
+ * idle for too long, the system will try to sleep.
*
* If a command has disconnected, eventually an interrupt will trigger,
* calling NCR5380_intr() which will in turn call NCR5380_reselect
* AUTOSENSE - if defined, REQUEST SENSE will be performed automatically
* for commands that return with a CHECK CONDITION status.
*
+ * DIFFERENTIAL - if defined, NCR53c81 chips will use external differential
+ * transceivers.
+ *
* LINKED - if defined, linked commands are supported.
*
* REAL_DMA - if defined, REAL DMA is used during the data transfer phases.
*
* NCR5380_write(register, value) - write to the specific register
*
+ * NCR5380_implementation_fields - additional fields needed for this
+ * specific implementation of the NCR5380
+ *
* Either real DMA *or* pseudo DMA may be implemented
* REAL functions :
* NCR5380_REAL_DMA should be defined if real DMA is to be used.
* NCR5380_pwrite(instance, src, count)
* NCR5380_pread(instance, dst, count);
*
- * If nothing specific to this implementation needs doing (ie, with external
- * hardware), you must also define
- *
- * NCR5380_queue_command
- * NCR5380_reset
- * NCR5380_abort
- * NCR5380_proc_info
- *
- * to be the global entry points into the specific driver, ie
- * #define NCR5380_queue_command t128_queue_command.
- *
- * If this is not done, the routines will be defined as static functions
- * with the NCR5380* names and the user must provide a globally
- * accessible wrapper function.
- *
* The generic driver is initialized by calling NCR5380_init(instance),
* after setting the appropriate host specific fields and ID. If the
* driver wishes to autoprobe for an IRQ line, the NCR5380_probe_irq(instance,
- * possible) function may be used. Before the specific driver initialization
- * code finishes, NCR5380_print_options should be called.
+ * possible) function may be used.
*/
-static struct Scsi_Host *first_instance = NULL;
-static struct scsi_host_template *the_template = NULL;
-
/* Macros ease life... :-) */
#define SETUP_HOSTDATA(in) \
struct NCR5380_hostdata *hostdata = \
(struct NCR5380_hostdata *)(in)->hostdata
#define HOSTDATA(in) ((struct NCR5380_hostdata *)(in)->hostdata)
-#define NEXT(cmd) ((Scsi_Cmnd *)(cmd)->host_scribble)
+#define NEXT(cmd) ((struct scsi_cmnd *)(cmd)->host_scribble)
#define SET_NEXT(cmd,next) ((cmd)->host_scribble = (void *)(next))
-#define NEXTADDR(cmd) ((Scsi_Cmnd **)&(cmd)->host_scribble)
+#define NEXTADDR(cmd) ((struct scsi_cmnd **)&(cmd)->host_scribble)
#define HOSTNO instance->host_no
#define H_NO(cmd) (cmd)->device->host->host_no
* important: the tag bit must be cleared before 'nr_allocated' is decreased.
*/
-/* -1 for TAG_NONE is not possible with unsigned char cmd->tag */
-#undef TAG_NONE
-#define TAG_NONE 0xff
-
-typedef struct {
- DECLARE_BITMAP(allocated, MAX_TAGS);
- int nr_allocated;
- int queue_size;
-} TAG_ALLOC;
-
-static TAG_ALLOC TagAlloc[8][8]; /* 8 targets and 8 LUNs */
-
-
-static void __init init_tags(void)
+static void __init init_tags(struct NCR5380_hostdata *hostdata)
{
int target, lun;
- TAG_ALLOC *ta;
+ struct tag_alloc *ta;
- if (!setup_use_tagged_queuing)
+ if (!(hostdata->flags & FLAG_TAGGED_QUEUING))
return;
for (target = 0; target < 8; ++target) {
for (lun = 0; lun < 8; ++lun) {
- ta = &TagAlloc[target][lun];
+ ta = &hostdata->TagAlloc[target][lun];
bitmap_zero(ta->allocated, MAX_TAGS);
ta->nr_allocated = 0;
/* At the beginning, assume the maximum queue size we could
* conditions.
*/
-static int is_lun_busy(Scsi_Cmnd *cmd, int should_be_tagged)
+static int is_lun_busy(struct scsi_cmnd *cmd, int should_be_tagged)
{
u8 lun = cmd->device->lun;
SETUP_HOSTDATA(cmd->device->host);
if (hostdata->busy[cmd->device->id] & (1 << lun))
return 1;
if (!should_be_tagged ||
- !setup_use_tagged_queuing || !cmd->device->tagged_supported)
+ !(hostdata->flags & FLAG_TAGGED_QUEUING) ||
+ !cmd->device->tagged_supported)
return 0;
- if (TagAlloc[cmd->device->id][lun].nr_allocated >=
- TagAlloc[cmd->device->id][lun].queue_size) {
+ if (hostdata->TagAlloc[scmd_id(cmd)][lun].nr_allocated >=
+ hostdata->TagAlloc[scmd_id(cmd)][lun].queue_size) {
dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d: no free tags\n",
H_NO(cmd), cmd->device->id, lun);
return 1;
* untagged.
*/
-static void cmd_get_tag(Scsi_Cmnd *cmd, int should_be_tagged)
+static void cmd_get_tag(struct scsi_cmnd *cmd, int should_be_tagged)
{
u8 lun = cmd->device->lun;
SETUP_HOSTDATA(cmd->device->host);
* an untagged command.
*/
if (!should_be_tagged ||
- !setup_use_tagged_queuing || !cmd->device->tagged_supported) {
+ !(hostdata->flags & FLAG_TAGGED_QUEUING) ||
+ !cmd->device->tagged_supported) {
cmd->tag = TAG_NONE;
hostdata->busy[cmd->device->id] |= (1 << lun);
dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d now allocated by untagged "
"command\n", H_NO(cmd), cmd->device->id, lun);
} else {
- TAG_ALLOC *ta = &TagAlloc[cmd->device->id][lun];
+ struct tag_alloc *ta = &hostdata->TagAlloc[scmd_id(cmd)][lun];
cmd->tag = find_first_zero_bit(ta->allocated, MAX_TAGS);
set_bit(cmd->tag, ta->allocated);
* unlock the LUN.
*/
-static void cmd_free_tag(Scsi_Cmnd *cmd)
+static void cmd_free_tag(struct scsi_cmnd *cmd)
{
u8 lun = cmd->device->lun;
SETUP_HOSTDATA(cmd->device->host);
printk(KERN_NOTICE "scsi%d: trying to free bad tag %d!\n",
H_NO(cmd), cmd->tag);
} else {
- TAG_ALLOC *ta = &TagAlloc[cmd->device->id][lun];
+ struct tag_alloc *ta = &hostdata->TagAlloc[scmd_id(cmd)][lun];
clear_bit(cmd->tag, ta->allocated);
ta->nr_allocated--;
dprintk(NDEBUG_TAGS, "scsi%d: freed tag %d for target %d lun %d\n",
}
-static void free_all_tags(void)
+static void free_all_tags(struct NCR5380_hostdata *hostdata)
{
int target, lun;
- TAG_ALLOC *ta;
+ struct tag_alloc *ta;
- if (!setup_use_tagged_queuing)
+ if (!(hostdata->flags & FLAG_TAGGED_QUEUING))
return;
for (target = 0; target < 8; ++target) {
for (lun = 0; lun < 8; ++lun) {
- ta = &TagAlloc[target][lun];
+ ta = &hostdata->TagAlloc[target][lun];
bitmap_zero(ta->allocated, MAX_TAGS);
ta->nr_allocated = 0;
}
/*
- * Function: void merge_contiguous_buffers( Scsi_Cmnd *cmd )
+ * Function: void merge_contiguous_buffers( struct scsi_cmnd *cmd )
*
* Purpose: Try to merge several scatter-gather requests into one DMA
* transfer. This is possible if the scatter buffers lie on
* physical contiguous addresses.
*
- * Parameters: Scsi_Cmnd *cmd
+ * Parameters: struct scsi_cmnd *cmd
* The command to work on. The first scatter buffer's data are
* assumed to be already transferred into ptr/this_residual.
*/
-static void merge_contiguous_buffers(Scsi_Cmnd *cmd)
+static void merge_contiguous_buffers(struct scsi_cmnd *cmd)
{
+#if !defined(CONFIG_SUN3)
unsigned long endaddr;
#if (NDEBUG & NDEBUG_MERGING)
unsigned long oldlen = cmd->SCp.this_residual;
dprintk(NDEBUG_MERGING, "merged %d buffers from %p, new length %08x\n",
cnt, cmd->SCp.ptr, cmd->SCp.this_residual);
#endif
+#endif /* !defined(CONFIG_SUN3) */
}
-/*
- * Function : void initialize_SCp(Scsi_Cmnd *cmd)
+/**
+ * initialize_SCp - init the scsi pointer field
+ * @cmd: command block to set up
*
- * Purpose : initialize the saved data pointers for cmd to point to the
- * start of the buffer.
- *
- * Inputs : cmd - Scsi_Cmnd structure to have pointers reset.
+ * Set up the internal fields in the SCSI command.
*/
-static inline void initialize_SCp(Scsi_Cmnd *cmd)
+static inline void initialize_SCp(struct scsi_cmnd *cmd)
{
/*
* Initialize the Scsi Pointer field so that all of the commands in the
{0, NULL}
};
-/*
- * Function : void NCR5380_print(struct Scsi_Host *instance)
+/**
+ * NCR5380_print - print scsi bus signals
+ * @instance: adapter state to dump
*
- * Purpose : print the SCSI bus signals for debugging purposes
- *
- * Input : instance - which NCR5380
+ * Print the SCSI bus signals for debugging purposes
*/
static void NCR5380_print(struct Scsi_Host *instance)
{PHASE_UNKNOWN, "UNKNOWN"}
};
-/*
- * Function : void NCR5380_print_phase(struct Scsi_Host *instance)
+/**
+ * NCR5380_print_phase - show SCSI phase
+ * @instance: adapter to dump
*
- * Purpose : print the current SCSI phase for debugging purposes
+ * Print the current SCSI phase for debugging purposes
*
- * Input : instance - which NCR5380
+ * Locks: none
*/
static void NCR5380_print_phase(struct Scsi_Host *instance)
#include <linux/workqueue.h>
#include <linux/interrupt.h>
-static volatile int main_running;
-static DECLARE_WORK(NCR5380_tqueue, NCR5380_main);
-
-static inline void queue_main(void)
+static inline void queue_main(struct NCR5380_hostdata *hostdata)
{
- if (!main_running) {
+ if (!hostdata->main_running) {
/* If in interrupt and NCR5380_main() not already running,
queue it on the 'immediate' task queue, to be processed
immediately after the current interrupt processing has
finished. */
- schedule_work(&NCR5380_tqueue);
+ schedule_work(&hostdata->main_task);
}
/* else: nothing to do: the running NCR5380_main() will pick up
any newly queued command. */
}
-
-static inline void NCR5380_all_init(void)
-{
- static int done = 0;
- if (!done) {
- dprintk(NDEBUG_INIT, "scsi : NCR5380_all_init()\n");
- done = 1;
- }
-}
-
-
-/*
- * Function : void NCR58380_print_options (struct Scsi_Host *instance)
+/**
+ * NCR58380_info - report driver and host information
+ * @instance: relevant scsi host instance
*
- * Purpose : called by probe code indicating the NCR5380 driver
- * options that were selected.
+ * For use as the host template info() handler.
*
- * Inputs : instance, pointer to this instance. Unused.
+ * Locks: none
*/
-static void __init NCR5380_print_options(struct Scsi_Host *instance)
+static const char *NCR5380_info(struct Scsi_Host *instance)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+ return hostdata->info;
+}
+
+static void prepare_info(struct Scsi_Host *instance)
{
- printk(" generic options"
-#ifdef AUTOSENSE
- " AUTOSENSE"
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+ snprintf(hostdata->info, sizeof(hostdata->info),
+ "%s, io_port 0x%lx, n_io_port %d, "
+ "base 0x%lx, irq %d, "
+ "can_queue %d, cmd_per_lun %d, "
+ "sg_tablesize %d, this_id %d, "
+ "flags { %s}, "
+ "options { %s} ",
+ instance->hostt->name, instance->io_port, instance->n_io_port,
+ instance->base, instance->irq,
+ instance->can_queue, instance->cmd_per_lun,
+ instance->sg_tablesize, instance->this_id,
+ hostdata->flags & FLAG_TAGGED_QUEUING ? "TAGGED_QUEUING " : "",
+#ifdef DIFFERENTIAL
+ "DIFFERENTIAL "
#endif
#ifdef REAL_DMA
- " REAL DMA"
+ "REAL_DMA "
#endif
#ifdef PARITY
- " PARITY"
+ "PARITY "
#endif
#ifdef SUPPORT_TAGS
- " SCSI-2 TAGGED QUEUING"
+ "SUPPORT_TAGS "
#endif
- );
- printk(" generic release=%d", NCR5380_PUBLIC_RELEASE);
+ "");
}
-/*
- * Function : void NCR5380_print_status (struct Scsi_Host *instance)
+/**
+ * NCR5380_print_status - dump controller info
+ * @instance: controller to dump
*
- * Purpose : print commands in the various queues, called from
- * NCR5380_abort and NCR5380_debug to aid debugging.
- *
- * Inputs : instance, pointer to this instance.
+ * Print commands in the various queues, called from NCR5380_abort
+ * to aid debugging.
*/
-static void lprint_Scsi_Cmnd(Scsi_Cmnd *cmd)
+static void lprint_Scsi_Cmnd(struct scsi_cmnd *cmd)
{
int i, s;
unsigned char *command;
static void NCR5380_print_status(struct Scsi_Host *instance)
{
struct NCR5380_hostdata *hostdata;
- Scsi_Cmnd *ptr;
+ struct scsi_cmnd *ptr;
unsigned long flags;
NCR5380_dprint(NDEBUG_ANY, instance);
hostdata = (struct NCR5380_hostdata *)instance->hostdata;
- printk("\nNCR5380 core release=%d.\n", NCR5380_PUBLIC_RELEASE);
local_irq_save(flags);
printk("NCR5380: coroutine is%s running.\n",
- main_running ? "" : "n't");
+ hostdata->main_running ? "" : "n't");
if (!hostdata->connected)
printk("scsi%d: no currently connected command\n", HOSTNO);
else
- lprint_Scsi_Cmnd((Scsi_Cmnd *) hostdata->connected);
+ lprint_Scsi_Cmnd((struct scsi_cmnd *) hostdata->connected);
printk("scsi%d: issue_queue\n", HOSTNO);
- for (ptr = (Scsi_Cmnd *)hostdata->issue_queue; ptr; ptr = NEXT(ptr))
+ for (ptr = (struct scsi_cmnd *)hostdata->issue_queue; ptr; ptr = NEXT(ptr))
lprint_Scsi_Cmnd(ptr);
printk("scsi%d: disconnected_queue\n", HOSTNO);
- for (ptr = (Scsi_Cmnd *) hostdata->disconnected_queue; ptr;
+ for (ptr = (struct scsi_cmnd *) hostdata->disconnected_queue; ptr;
ptr = NEXT(ptr))
lprint_Scsi_Cmnd(ptr);
printk("\n");
}
-static void show_Scsi_Cmnd(Scsi_Cmnd *cmd, struct seq_file *m)
+static void show_Scsi_Cmnd(struct scsi_cmnd *cmd, struct seq_file *m)
{
int i, s;
unsigned char *command;
seq_printf(m, "\n");
}
-static int NCR5380_show_info(struct seq_file *m, struct Scsi_Host *instance)
+static int __maybe_unused NCR5380_show_info(struct seq_file *m,
+ struct Scsi_Host *instance)
{
struct NCR5380_hostdata *hostdata;
- Scsi_Cmnd *ptr;
+ struct scsi_cmnd *ptr;
unsigned long flags;
hostdata = (struct NCR5380_hostdata *)instance->hostdata;
- seq_printf(m, "NCR5380 core release=%d.\n", NCR5380_PUBLIC_RELEASE);
local_irq_save(flags);
seq_printf(m, "NCR5380: coroutine is%s running.\n",
- main_running ? "" : "n't");
+ hostdata->main_running ? "" : "n't");
if (!hostdata->connected)
seq_printf(m, "scsi%d: no currently connected command\n", HOSTNO);
else
- show_Scsi_Cmnd((Scsi_Cmnd *) hostdata->connected, m);
+ show_Scsi_Cmnd((struct scsi_cmnd *) hostdata->connected, m);
seq_printf(m, "scsi%d: issue_queue\n", HOSTNO);
- for (ptr = (Scsi_Cmnd *)hostdata->issue_queue; ptr; ptr = NEXT(ptr))
+ for (ptr = (struct scsi_cmnd *)hostdata->issue_queue; ptr; ptr = NEXT(ptr))
show_Scsi_Cmnd(ptr, m);
seq_printf(m, "scsi%d: disconnected_queue\n", HOSTNO);
- for (ptr = (Scsi_Cmnd *) hostdata->disconnected_queue; ptr;
+ for (ptr = (struct scsi_cmnd *) hostdata->disconnected_queue; ptr;
ptr = NEXT(ptr))
show_Scsi_Cmnd(ptr, m);
return 0;
}
-/*
- * Function : void NCR5380_init (struct Scsi_Host *instance)
+/**
+ * NCR5380_init - initialise an NCR5380
+ * @instance: adapter to configure
+ * @flags: control flags
*
- * Purpose : initializes *instance and corresponding 5380 chip.
- *
- * Inputs : instance - instantiation of the 5380 driver.
+ * Initializes *instance and corresponding 5380 chip,
+ * with flags OR'd into the initial flags value.
*
* Notes : I assume that the host, hostno, and id bits have been
- * set correctly. I don't care about the irq and other fields.
+ * set correctly. I don't care about the irq and other fields.
*
+ * Returns 0 for success
*/
static int __init NCR5380_init(struct Scsi_Host *instance, int flags)
int i;
SETUP_HOSTDATA(instance);
- NCR5380_all_init();
-
+ hostdata->host = instance;
hostdata->aborted = 0;
hostdata->id_mask = 1 << instance->this_id;
hostdata->id_higher_mask = 0;
for (i = 0; i < 8; ++i)
hostdata->busy[i] = 0;
#ifdef SUPPORT_TAGS
- init_tags();
+ init_tags(hostdata);
#endif
#if defined (REAL_DMA)
hostdata->dma_len = 0;
hostdata->connected = NULL;
hostdata->issue_queue = NULL;
hostdata->disconnected_queue = NULL;
- hostdata->flags = FLAG_CHECK_LAST_BYTE_SENT;
+ hostdata->flags = flags;
- if (!the_template) {
- the_template = instance->hostt;
- first_instance = instance;
- }
+ INIT_WORK(&hostdata->main_task, NCR5380_main);
-#ifndef AUTOSENSE
- if ((instance->cmd_per_lun > 1) || (instance->can_queue > 1))
- printk("scsi%d: WARNING : support for multiple outstanding commands enabled\n"
- " without AUTOSENSE option, contingent allegiance conditions may\n"
- " be incorrectly cleared.\n", HOSTNO);
-#endif /* def AUTOSENSE */
+ prepare_info(instance);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
NCR5380_write(MODE_REG, MR_BASE);
return 0;
}
+/**
+ * NCR5380_exit - remove an NCR5380
+ * @instance: adapter to remove
+ *
+ * Assumes that no more work can be queued (e.g. by NCR5380_intr).
+ */
+
static void NCR5380_exit(struct Scsi_Host *instance)
{
- /* Empty, as we didn't schedule any delayed work */
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+ cancel_work_sync(&hostdata->main_task);
}
-/*
- * Function : int NCR5380_queue_command (Scsi_Cmnd *cmd,
- * void (*done)(Scsi_Cmnd *))
- *
- * Purpose : enqueues a SCSI command
- *
- * Inputs : cmd - SCSI command, done - function called on completion, with
- * a pointer to the command descriptor.
- *
- * Returns : 0
- *
- * Side effects :
- * cmd is added to the per instance issue_queue, with minor
- * twiddling done to the host specific fields of cmd. If the
- * main coroutine is not running, it is restarted.
+/**
+ * NCR5380_queue_command - queue a command
+ * @instance: the relevant SCSI adapter
+ * @cmd: SCSI command
*
+ * cmd is added to the per instance issue_queue, with minor
+ * twiddling done to the host specific fields of cmd. If the
+ * main coroutine is not running, it is restarted.
*/
-static int NCR5380_queue_command_lck(Scsi_Cmnd *cmd, void (*done)(Scsi_Cmnd *))
+static int NCR5380_queue_command(struct Scsi_Host *instance,
+ struct scsi_cmnd *cmd)
{
- SETUP_HOSTDATA(cmd->device->host);
- Scsi_Cmnd *tmp;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ struct scsi_cmnd *tmp;
unsigned long flags;
#if (NDEBUG & NDEBUG_NO_WRITE)
printk(KERN_NOTICE "scsi%d: WRITE attempted with NO_WRITE debugging flag set\n",
H_NO(cmd));
cmd->result = (DID_ERROR << 16);
- done(cmd);
+ cmd->scsi_done(cmd);
return 0;
}
#endif /* (NDEBUG & NDEBUG_NO_WRITE) */
-#ifdef NCR5380_STATS
-# if 0
- if (!hostdata->connected && !hostdata->issue_queue &&
- !hostdata->disconnected_queue) {
- hostdata->timebase = jiffies;
- }
-# endif
-# ifdef NCR5380_STAT_LIMIT
- if (scsi_bufflen(cmd) > NCR5380_STAT_LIMIT)
-# endif
- switch (cmd->cmnd[0]) {
- case WRITE:
- case WRITE_6:
- case WRITE_10:
- hostdata->time_write[cmd->device->id] -= (jiffies - hostdata->timebase);
- hostdata->bytes_write[cmd->device->id] += scsi_bufflen(cmd);
- hostdata->pendingw++;
- break;
- case READ:
- case READ_6:
- case READ_10:
- hostdata->time_read[cmd->device->id] -= (jiffies - hostdata->timebase);
- hostdata->bytes_read[cmd->device->id] += scsi_bufflen(cmd);
- hostdata->pendingr++;
- break;
- }
-#endif
-
/*
* We use the host_scribble field as a pointer to the next command
* in a queue
*/
SET_NEXT(cmd, NULL);
- cmd->scsi_done = done;
-
cmd->result = 0;
/*
* sense data is only guaranteed to be valid while the condition exists.
*/
- local_irq_save(flags);
/* ++guenther: now that the issue queue is being set up, we can lock ST-DMA.
* Otherwise a running NCR5380_main may steal the lock.
* Lock before actually inserting due to fairness reasons explained in
* because also a timer int can trigger an abort or reset, which would
* alter queues and touch the lock.
*/
- if (!IS_A_TT()) {
- /* perhaps stop command timer here */
- falcon_get_lock();
- /* perhaps restart command timer here */
- }
+ if (!NCR5380_acquire_dma_irq(instance))
+ return SCSI_MLQUEUE_HOST_BUSY;
+
+ local_irq_save(flags);
+
+ /*
+ * Insert the cmd into the issue queue. Note that REQUEST SENSE
+ * commands are added to the head of the queue since any command will
+ * clear the contingent allegiance condition that exists and the
+ * sense data is only guaranteed to be valid while the condition exists.
+ */
+
if (!(hostdata->issue_queue) || (cmd->cmnd[0] == REQUEST_SENSE)) {
LIST(cmd, hostdata->issue_queue);
SET_NEXT(cmd, hostdata->issue_queue);
hostdata->issue_queue = cmd;
} else {
- for (tmp = (Scsi_Cmnd *)hostdata->issue_queue;
+ for (tmp = (struct scsi_cmnd *)hostdata->issue_queue;
NEXT(tmp); tmp = NEXT(tmp))
;
LIST(cmd, tmp);
* If we're not in an interrupt, we can call NCR5380_main()
* unconditionally, because it cannot be already running.
*/
- if (in_interrupt() || ((flags >> 8) & 7) >= 6)
- queue_main();
+ if (in_interrupt() || irqs_disabled())
+ queue_main(hostdata);
else
- NCR5380_main(NULL);
+ NCR5380_main(&hostdata->main_task);
return 0;
}
-static DEF_SCSI_QCMD(NCR5380_queue_command)
+static inline void maybe_release_dma_irq(struct Scsi_Host *instance)
+{
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+ /* Caller does the locking needed to set & test these data atomically */
+ if (!hostdata->disconnected_queue &&
+ !hostdata->issue_queue &&
+ !hostdata->connected &&
+ !hostdata->retain_dma_intr)
+ NCR5380_release_dma_irq(instance);
+}
-/*
- * Function : NCR5380_main (void)
+/**
+ * NCR5380_main - NCR state machines
*
- * Purpose : NCR5380_main is a coroutine that runs as long as more work can
- * be done on the NCR5380 host adapters in a system. Both
- * NCR5380_queue_command() and NCR5380_intr() will try to start it
- * in case it is not running.
+ * NCR5380_main is a coroutine that runs as long as more work can
+ * be done on the NCR5380 host adapters in a system. Both
+ * NCR5380_queue_command() and NCR5380_intr() will try to start it
+ * in case it is not running.
*
- * NOTE : NCR5380_main exits with interrupts *disabled*, the caller should
- * reenable them. This prevents reentrancy and kernel stack overflow.
+ * Locks: called as its own thread with no locks held.
*/
static void NCR5380_main(struct work_struct *work)
{
- Scsi_Cmnd *tmp, *prev;
- struct Scsi_Host *instance = first_instance;
- struct NCR5380_hostdata *hostdata = HOSTDATA(instance);
+ struct NCR5380_hostdata *hostdata =
+ container_of(work, struct NCR5380_hostdata, main_task);
+ struct Scsi_Host *instance = hostdata->host;
+ struct scsi_cmnd *tmp, *prev;
int done;
unsigned long flags;
'main_running' is set here, and queues/executes main via the
task queue, it doesn't do any harm, just this instance of main
won't find any work left to do. */
- if (main_running)
+ if (hostdata->main_running)
return;
- main_running = 1;
+ hostdata->main_running = 1;
local_save_flags(flags);
do {
* for a target that's not busy.
*/
#if (NDEBUG & NDEBUG_LISTS)
- for (tmp = (Scsi_Cmnd *) hostdata->issue_queue, prev = NULL;
+ for (tmp = (struct scsi_cmnd *) hostdata->issue_queue, prev = NULL;
tmp && (tmp != prev); prev = tmp, tmp = NEXT(tmp))
;
/*printk("%p ", tmp);*/
printk(" LOOP\n");
/* else printk("\n"); */
#endif
- for (tmp = (Scsi_Cmnd *) hostdata->issue_queue,
+ for (tmp = (struct scsi_cmnd *) hostdata->issue_queue,
prev = NULL; tmp; prev = tmp, tmp = NEXT(tmp)) {
u8 lun = tmp->device->lun;
-#if (NDEBUG & NDEBUG_LISTS)
- if (prev != tmp)
- printk("MAIN tmp=%p target=%d busy=%d lun=%llu\n",
- tmp, tmp->device->id, hostdata->busy[tmp->device->id],
- lun);
-#endif
+ dprintk(NDEBUG_LISTS,
+ "MAIN tmp=%p target=%d busy=%d lun=%d\n",
+ tmp, scmd_id(tmp), hostdata->busy[scmd_id(tmp)],
+ lun);
/* When we find one, remove it from the issue queue. */
/* ++guenther: possible race with Falcon locking */
if (
hostdata->issue_queue = NEXT(tmp);
}
SET_NEXT(tmp, NULL);
- falcon_dont_release++;
+ hostdata->retain_dma_intr++;
/* reenable interrupts after finding one */
local_irq_restore(flags);
#ifdef SUPPORT_TAGS
cmd_get_tag(tmp, tmp->cmnd[0] != REQUEST_SENSE);
#endif
- if (!NCR5380_select(instance, tmp,
- (tmp->cmnd[0] == REQUEST_SENSE) ? TAG_NONE :
- TAG_NEXT)) {
- falcon_dont_release--;
+ if (!NCR5380_select(instance, tmp)) {
+ local_irq_disable();
+ hostdata->retain_dma_intr--;
/* release if target did not response! */
- falcon_release_lock_if_possible(hostdata);
+ maybe_release_dma_irq(instance);
+ local_irq_restore(flags);
break;
} else {
local_irq_disable();
#ifdef SUPPORT_TAGS
cmd_free_tag(tmp);
#endif
- falcon_dont_release--;
+ hostdata->retain_dma_intr--;
local_irq_restore(flags);
dprintk(NDEBUG_MAIN, "scsi%d: main(): select() failed, "
"returned to issue_queue\n", HOSTNO);
/* Better allow ints _after_ 'main_running' has been cleared, else
an interrupt could believe we'll pick up the work it left for
us, but we won't see it anymore here... */
- main_running = 0;
+ hostdata->main_running = 0;
local_irq_restore(flags);
}
static void NCR5380_dma_complete(struct Scsi_Host *instance)
{
SETUP_HOSTDATA(instance);
- int transfered, saved_data = 0, overrun = 0, cnt, toPIO;
- unsigned char **data, p;
+ int transferred;
+ unsigned char **data;
volatile int *count;
+ int saved_data = 0, overrun = 0;
+ unsigned char p;
if (!hostdata->connected) {
printk(KERN_WARNING "scsi%d: received end of DMA interrupt with "
return;
}
- if (atari_read_overruns) {
+ if (hostdata->read_overruns) {
p = hostdata->connected->SCp.phase;
if (p & SR_IO) {
udelay(10);
HOSTNO, NCR5380_read(BUS_AND_STATUS_REG),
NCR5380_read(STATUS_REG));
+#if defined(CONFIG_SUN3)
+ if ((sun3scsi_dma_finish(rq_data_dir(hostdata->connected->request)))) {
+ pr_err("scsi%d: overrun in UDC counter -- not prepared to deal with this!\n",
+ instance->host_no);
+ BUG();
+ }
+
+ /* make sure we're not stuck in a data phase */
+ if ((NCR5380_read(BUS_AND_STATUS_REG) & (BASR_PHASE_MATCH | BASR_ACK)) ==
+ (BASR_PHASE_MATCH | BASR_ACK)) {
+ pr_err("scsi%d: BASR %02x\n", instance->host_no,
+ NCR5380_read(BUS_AND_STATUS_REG));
+ pr_err("scsi%d: bus stuck in data phase -- probably a single byte overrun!\n",
+ instance->host_no);
+ BUG();
+ }
+#endif
+
(void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
NCR5380_write(MODE_REG, MR_BASE);
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- transfered = hostdata->dma_len - NCR5380_dma_residual(instance);
+ transferred = hostdata->dma_len - NCR5380_dma_residual(instance);
hostdata->dma_len = 0;
data = (unsigned char **)&hostdata->connected->SCp.ptr;
count = &hostdata->connected->SCp.this_residual;
- *data += transfered;
- *count -= transfered;
+ *data += transferred;
+ *count -= transferred;
+
+ if (hostdata->read_overruns) {
+ int cnt, toPIO;
- if (atari_read_overruns) {
if ((NCR5380_read(STATUS_REG) & PHASE_MASK) == p && (p & SR_IO)) {
- cnt = toPIO = atari_read_overruns;
+ cnt = toPIO = hostdata->read_overruns;
if (overrun) {
dprintk(NDEBUG_DMA, "Got an input overrun, using saved byte\n");
*(*data)++ = saved_data;
#endif /* REAL_DMA */
-/*
- * Function : void NCR5380_intr (int irq)
- *
- * Purpose : handle interrupts, reestablishing I_T_L or I_T_L_Q nexuses
- * from the disconnected queue, and restarting NCR5380_main()
- * as required.
- *
- * Inputs : int irq, irq that caused this interrupt.
+/**
+ * NCR5380_intr - generic NCR5380 irq handler
+ * @irq: interrupt number
+ * @dev_id: device info
*
+ * Handle interrupts, reestablishing I_T_L or I_T_L_Q nexuses
+ * from the disconnected queue, and restarting NCR5380_main()
+ * as required.
*/
static irqreturn_t NCR5380_intr(int irq, void *dev_id)
{
- struct Scsi_Host *instance = first_instance;
+ struct Scsi_Host *instance = dev_id;
int done = 1, handled = 0;
unsigned char basr;
NCR5380_dprint(NDEBUG_INTR, instance);
if ((NCR5380_read(STATUS_REG) & (SR_SEL|SR_IO)) == (SR_SEL|SR_IO)) {
done = 0;
- ENABLE_IRQ();
dprintk(NDEBUG_INTR, "scsi%d: SEL interrupt\n", HOSTNO);
NCR5380_reselect(instance);
(void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
dprintk(NDEBUG_INTR, "scsi%d: PHASE MISM or EOP interrupt\n", HOSTNO);
NCR5380_dma_complete( instance );
done = 0;
- ENABLE_IRQ();
} else
#endif /* REAL_DMA */
{
/* MS: Ignore unknown phase mismatch interrupts (caused by EOP interrupt) */
if (basr & BASR_PHASE_MATCH)
- printk(KERN_NOTICE "scsi%d: unknown interrupt, "
+ dprintk(NDEBUG_INTR, "scsi%d: unknown interrupt, "
"BASR 0x%x, MR 0x%x, SR 0x%x\n",
HOSTNO, basr, NCR5380_read(MODE_REG),
NCR5380_read(STATUS_REG));
(void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+#ifdef SUN3_SCSI_VME
+ dregs->csr |= CSR_DMA_ENABLE;
+#endif
}
} /* if !(SELECTION || PARITY) */
handled = 1;
"BASR 0x%X, MR 0x%X, SR 0x%x\n", HOSTNO, basr,
NCR5380_read(MODE_REG), NCR5380_read(STATUS_REG));
(void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+#ifdef SUN3_SCSI_VME
+ dregs->csr |= CSR_DMA_ENABLE;
+#endif
}
if (!done) {
dprintk(NDEBUG_INTR, "scsi%d: in int routine, calling main\n", HOSTNO);
/* Put a call to NCR5380_main() on the queue... */
- queue_main();
+ queue_main(shost_priv(instance));
}
return IRQ_RETVAL(handled);
}
-#ifdef NCR5380_STATS
-static void collect_stats(struct NCR5380_hostdata* hostdata, Scsi_Cmnd *cmd)
-{
-# ifdef NCR5380_STAT_LIMIT
- if (scsi_bufflen(cmd) > NCR5380_STAT_LIMIT)
-# endif
- switch (cmd->cmnd[0]) {
- case WRITE:
- case WRITE_6:
- case WRITE_10:
- hostdata->time_write[cmd->device->id] += (jiffies - hostdata->timebase);
- /*hostdata->bytes_write[cmd->device->id] += scsi_bufflen(cmd);*/
- hostdata->pendingw--;
- break;
- case READ:
- case READ_6:
- case READ_10:
- hostdata->time_read[cmd->device->id] += (jiffies - hostdata->timebase);
- /*hostdata->bytes_read[cmd->device->id] += scsi_bufflen(cmd);*/
- hostdata->pendingr--;
- break;
- }
-}
-#endif
-
/*
- * Function : int NCR5380_select (struct Scsi_Host *instance, Scsi_Cmnd *cmd,
- * int tag);
+ * Function : int NCR5380_select(struct Scsi_Host *instance,
+ * struct scsi_cmnd *cmd)
*
* Purpose : establishes I_T_L or I_T_L_Q nexus for new or existing command,
* including ARBITRATION, SELECTION, and initial message out for
* IDENTIFY and queue messages.
*
* Inputs : instance - instantiation of the 5380 driver on which this
- * target lives, cmd - SCSI command to execute, tag - set to TAG_NEXT for
- * new tag, TAG_NONE for untagged queueing, otherwise set to the tag for
- * the command that is presently connected.
+ * target lives, cmd - SCSI command to execute.
*
* Returns : -1 if selection could not execute for some reason,
* 0 if selection succeeded or failed because the target
* cmd->result host byte set to DID_BAD_TARGET.
*/
-static int NCR5380_select(struct Scsi_Host *instance, Scsi_Cmnd *cmd, int tag)
+static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd)
{
SETUP_HOSTDATA(instance);
unsigned char tmp[3], phase;
* selection.
*/
- timeout = jiffies + 25;
+ timeout = jiffies + (250 * HZ / 1000);
/*
* XXX very interesting - we're seeing a bounce where the BSY we
return -1;
}
cmd->result = DID_BAD_TARGET << 16;
-#ifdef NCR5380_STATS
- collect_stats(hostdata, cmd);
-#endif
#ifdef SUPPORT_TAGS
cmd_free_tag(cmd);
#endif
#ifndef SUPPORT_TAGS
hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun);
#endif
+#ifdef SUN3_SCSI_VME
+ dregs->csr |= CSR_INTR;
+#endif
initialize_SCp(cmd);
* Returns : 0 on success, -1 on failure.
*/
-static int do_abort(struct Scsi_Host *host)
+static int do_abort(struct Scsi_Host *instance)
{
unsigned char tmp, *msgptr, phase;
int len;
msgptr = &tmp;
len = 1;
phase = PHASE_MSGOUT;
- NCR5380_transfer_pio(host, &phase, &len, &msgptr);
+ NCR5380_transfer_pio(instance, &phase, &len, &msgptr);
/*
* If we got here, and the command completed successfully,
SETUP_HOSTDATA(instance);
register int c = *count;
register unsigned char p = *phase;
+ unsigned long flags;
+
+#if defined(CONFIG_SUN3)
+ /* sanity check */
+ if (!sun3_dma_setup_done) {
+ pr_err("scsi%d: transfer_dma without setup!\n",
+ instance->host_no);
+ BUG();
+ }
+ hostdata->dma_len = c;
+
+ dprintk(NDEBUG_DMA, "scsi%d: initializing DMA for %s, %d bytes %s %p\n",
+ instance->host_no, (p & SR_IO) ? "reading" : "writing",
+ c, (p & SR_IO) ? "to" : "from", *data);
+
+ /* netbsd turns off ints here, why not be safe and do it too */
+ local_irq_save(flags);
+
+ /* send start chain */
+ sun3scsi_dma_start(c, *data);
+
+ if (p & SR_IO) {
+ NCR5380_write(TARGET_COMMAND_REG, 1);
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ NCR5380_write(INITIATOR_COMMAND_REG, 0);
+ NCR5380_write(MODE_REG,
+ (NCR5380_read(MODE_REG) | MR_DMA_MODE | MR_ENABLE_EOP_INTR));
+ NCR5380_write(START_DMA_INITIATOR_RECEIVE_REG, 0);
+ } else {
+ NCR5380_write(TARGET_COMMAND_REG, 0);
+ NCR5380_read(RESET_PARITY_INTERRUPT_REG);
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_ASSERT_DATA);
+ NCR5380_write(MODE_REG,
+ (NCR5380_read(MODE_REG) | MR_DMA_MODE | MR_ENABLE_EOP_INTR));
+ NCR5380_write(START_DMA_SEND_REG, 0);
+ }
+
+#ifdef SUN3_SCSI_VME
+ dregs->csr |= CSR_DMA_ENABLE;
+#endif
+
+ local_irq_restore(flags);
+
+ sun3_dma_active = 1;
+
+#else /* !defined(CONFIG_SUN3) */
register unsigned char *d = *data;
unsigned char tmp;
- unsigned long flags;
if ((tmp = (NCR5380_read(STATUS_REG) & PHASE_MASK)) != p) {
*phase = tmp;
return -1;
}
- if (atari_read_overruns && (p & SR_IO))
- c -= atari_read_overruns;
+ if (hostdata->read_overruns && (p & SR_IO))
+ c -= hostdata->read_overruns;
dprintk(NDEBUG_DMA, "scsi%d: initializing DMA for %s, %d bytes %s %p\n",
HOSTNO, (p & SR_IO) ? "reading" : "writing",
NCR5380_write(MODE_REG, MR_BASE | MR_DMA_MODE | MR_ENABLE_EOP_INTR | MR_MONITOR_BSY);
#endif /* def REAL_DMA */
- if (IS_A_TT()) {
+ if (!(hostdata->flags & FLAG_LATE_DMA_SETUP)) {
/* On the Medusa, it is a must to initialize the DMA before
* starting the NCR. This is also the cleaner way for the TT.
*/
NCR5380_write(START_DMA_SEND_REG, 0);
}
- if (!IS_A_TT()) {
+ if (hostdata->flags & FLAG_LATE_DMA_SETUP) {
/* On the Falcon, the DMA setup must be done after the last */
/* NCR access, else the DMA setup gets trashed!
*/
NCR5380_dma_write_setup(instance, d, c);
local_irq_restore(flags);
}
+#endif /* !defined(CONFIG_SUN3) */
+
return 0;
}
#endif /* defined(REAL_DMA) */
#endif
unsigned char *data;
unsigned char phase, tmp, extended_msg[10], old_phase = 0xff;
- Scsi_Cmnd *cmd = (Scsi_Cmnd *) hostdata->connected;
+ struct scsi_cmnd *cmd = (struct scsi_cmnd *) hostdata->connected;
+
+#ifdef SUN3_SCSI_VME
+ dregs->csr |= CSR_INTR;
+#endif
while (1) {
tmp = NCR5380_read(STATUS_REG);
old_phase = phase;
NCR5380_dprint_phase(NDEBUG_INFORMATION, instance);
}
+#if defined(CONFIG_SUN3)
+ if (phase == PHASE_CMDOUT) {
+#if defined(REAL_DMA)
+ void *d;
+ unsigned long count;
+
+ if (!cmd->SCp.this_residual && cmd->SCp.buffers_residual) {
+ count = cmd->SCp.buffer->length;
+ d = sg_virt(cmd->SCp.buffer);
+ } else {
+ count = cmd->SCp.this_residual;
+ d = cmd->SCp.ptr;
+ }
+ /* this command setup for dma yet? */
+ if ((count >= DMA_MIN_SIZE) && (sun3_dma_setup_done != cmd)) {
+ if (cmd->request->cmd_type == REQ_TYPE_FS) {
+ sun3scsi_dma_setup(d, count,
+ rq_data_dir(cmd->request));
+ sun3_dma_setup_done = cmd;
+ }
+ }
+#endif
+#ifdef SUN3_SCSI_VME
+ dregs->csr |= CSR_INTR;
+#endif
+ }
+#endif /* CONFIG_SUN3 */
if (sink && (phase != PHASE_MSGOUT)) {
NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp));
*/
#if defined(REAL_DMA)
- if (!cmd->device->borken &&
- (transfersize = NCR5380_dma_xfer_len(instance,cmd,phase)) > 31) {
+ if (
+#if !defined(CONFIG_SUN3)
+ !cmd->device->borken &&
+#endif
+ (transfersize = NCR5380_dma_xfer_len(instance, cmd, phase)) >= DMA_MIN_SIZE) {
len = transfersize;
cmd->SCp.phase = phase;
if (NCR5380_transfer_dma(instance, &phase,
* If the watchdog timer fires, all future
* accesses to this device will use the
* polled-IO. */
- printk(KERN_NOTICE "scsi%d: switching target %d "
- "lun %llu to slow handshake\n", HOSTNO,
- cmd->device->id, cmd->device->lun);
+ scmd_printk(KERN_INFO, cmd,
+ "switching to slow handshake\n");
cmd->device->borken = 1;
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
ICR_ASSERT_ATN);
NCR5380_transfer_pio(instance, &phase,
(int *)&cmd->SCp.this_residual,
(unsigned char **)&cmd->SCp.ptr);
+#if defined(CONFIG_SUN3) && defined(REAL_DMA)
+ /* if we had intended to dma that command clear it */
+ if (sun3_dma_setup_done == cmd)
+ sun3_dma_setup_done = NULL;
+#endif
break;
case PHASE_MSGIN:
len = 1;
dprintk(NDEBUG_LINKED, "scsi%d: target %d lun %llu linked request "
"done, calling scsi_done().\n",
HOSTNO, cmd->device->id, cmd->device->lun);
-#ifdef NCR5380_STATS
- collect_stats(hostdata, cmd);
-#endif
cmd->scsi_done(cmd);
cmd = hostdata->connected;
break;
case COMMAND_COMPLETE:
/* Accept message by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- /* ++guenther: possible race with Falcon locking */
- falcon_dont_release++;
- hostdata->connected = NULL;
dprintk(NDEBUG_QUEUES, "scsi%d: command for target %d, lun %llu "
"completed\n", HOSTNO, cmd->device->id, cmd->device->lun);
+
+ local_irq_save(flags);
+ hostdata->retain_dma_intr++;
+ hostdata->connected = NULL;
#ifdef SUPPORT_TAGS
cmd_free_tag(cmd);
if (status_byte(cmd->SCp.Status) == QUEUE_FULL) {
*/
/* ++Andreas: the mid level code knows about
QUEUE_FULL now. */
- TAG_ALLOC *ta = &TagAlloc[cmd->device->id][cmd->device->lun];
+ struct tag_alloc *ta = &hostdata->TagAlloc[scmd_id(cmd)][cmd->device->lun];
dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %llu returned "
"QUEUE_FULL after %d commands\n",
HOSTNO, cmd->device->id, cmd->device->lun,
else if (status_byte(cmd->SCp.Status) != GOOD)
cmd->result = (cmd->result & 0x00ffff) | (DID_ERROR << 16);
-#ifdef AUTOSENSE
if ((cmd->cmnd[0] == REQUEST_SENSE) &&
hostdata->ses.cmd_len) {
scsi_eh_restore_cmnd(cmd, &hostdata->ses);
dprintk(NDEBUG_AUTOSENSE, "scsi%d: performing request sense\n", HOSTNO);
- local_irq_save(flags);
LIST(cmd,hostdata->issue_queue);
SET_NEXT(cmd, hostdata->issue_queue);
- hostdata->issue_queue = (Scsi_Cmnd *) cmd;
- local_irq_restore(flags);
+ hostdata->issue_queue = (struct scsi_cmnd *) cmd;
dprintk(NDEBUG_QUEUES, "scsi%d: REQUEST SENSE added to head of "
"issue queue\n", H_NO(cmd));
- } else
-#endif /* def AUTOSENSE */
- {
-#ifdef NCR5380_STATS
- collect_stats(hostdata, cmd);
-#endif
+ } else {
cmd->scsi_done(cmd);
}
+ local_irq_restore(flags);
+
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
/*
* Restore phase bits to 0 so an interrupted selection,
while ((NCR5380_read(STATUS_REG) & SR_BSY) && !hostdata->connected)
barrier();
- falcon_dont_release--;
+ local_irq_save(flags);
+ hostdata->retain_dma_intr--;
/* ++roman: For Falcon SCSI, release the lock on the
* ST-DMA here if no other commands are waiting on the
* disconnected queue.
*/
- falcon_release_lock_if_possible(hostdata);
+ maybe_release_dma_irq(instance);
+ local_irq_restore(flags);
return;
case MESSAGE_REJECT:
/* Accept message by clearing ACK */
/* Wait for bus free to avoid nasty timeouts */
while ((NCR5380_read(STATUS_REG) & SR_BSY) && !hostdata->connected)
barrier();
+#ifdef SUN3_SCSI_VME
+ dregs->csr |= CSR_DMA_ENABLE;
+#endif
return;
/*
* The SCSI data pointer is *IMPLICITLY* saved on a disconnect
*/
default:
if (!tmp) {
- printk(KERN_DEBUG "scsi%d: rejecting message ", HOSTNO);
+ printk(KERN_INFO "scsi%d: rejecting message ",
+ instance->host_no);
spi_print_msg(extended_msg);
printk("\n");
} else if (tmp != EXTENDED_MESSAGE)
- printk(KERN_DEBUG "scsi%d: rejecting unknown "
- "message %02x from target %d, lun %llu\n",
- HOSTNO, tmp, cmd->device->id, cmd->device->lun);
+ scmd_printk(KERN_INFO, cmd,
+ "rejecting unknown message %02x\n",
+ tmp);
else
- printk(KERN_DEBUG "scsi%d: rejecting unknown "
- "extended message "
- "code %02x, length %d from target %d, lun %llu\n",
- HOSTNO, extended_msg[1], extended_msg[0],
- cmd->device->id, cmd->device->lun);
-
+ scmd_printk(KERN_INFO, cmd,
+ "rejecting unknown extended message code %02x, length %d\n",
+ extended_msg[1], extended_msg[0]);
msgout = MESSAGE_REJECT;
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
hostdata->last_message = msgout;
NCR5380_transfer_pio(instance, &phase, &len, &data);
if (msgout == ABORT) {
+ local_irq_save(flags);
#ifdef SUPPORT_TAGS
cmd_free_tag(cmd);
#else
#endif
hostdata->connected = NULL;
cmd->result = DID_ERROR << 16;
-#ifdef NCR5380_STATS
- collect_stats(hostdata, cmd);
-#endif
- cmd->scsi_done(cmd);
NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- falcon_release_lock_if_possible(hostdata);
+ maybe_release_dma_irq(instance);
+ local_irq_restore(flags);
+ cmd->scsi_done(cmd);
return;
}
msgout = NOP;
* Function : void NCR5380_reselect (struct Scsi_Host *instance)
*
* Purpose : does reselection, initializing the instance->connected
- * field to point to the Scsi_Cmnd for which the I_T_L or I_T_L_Q
+ * field to point to the scsi_cmnd for which the I_T_L or I_T_L_Q
* nexus has been reestablished,
*
* Inputs : instance - this instance of the NCR5380.
*/
+/* it might eventually prove necessary to do a dma setup on
+ reselection, but it doesn't seem to be needed now -- sam */
+
static void NCR5380_reselect(struct Scsi_Host *instance)
{
SETUP_HOSTDATA(instance);
unsigned char target_mask;
- unsigned char lun, phase;
- int len;
+ unsigned char lun;
#ifdef SUPPORT_TAGS
unsigned char tag;
#endif
unsigned char msg[3];
- unsigned char *data;
- Scsi_Cmnd *tmp = NULL, *prev;
-/* unsigned long flags; */
+ int __maybe_unused len;
+ unsigned char __maybe_unused *data, __maybe_unused phase;
+ struct scsi_cmnd *tmp = NULL, *prev;
/*
* Disable arbitration, etc. since the host adapter obviously
while (!(NCR5380_read(STATUS_REG) & SR_REQ))
;
+#if defined(CONFIG_SUN3) && defined(REAL_DMA)
+ /* acknowledge toggle to MSGIN */
+ NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(PHASE_MSGIN));
+
+ /* peek at the byte without really hitting the bus */
+ msg[0] = NCR5380_read(CURRENT_SCSI_DATA_REG);
+#else
len = 1;
data = msg;
phase = PHASE_MSGIN;
NCR5380_transfer_pio(instance, &phase, &len, &data);
+#endif
if (!(msg[0] & 0x80)) {
printk(KERN_DEBUG "scsi%d: expecting IDENTIFY message, got ", HOSTNO);
}
lun = (msg[0] & 0x07);
-#ifdef SUPPORT_TAGS
+#if defined(SUPPORT_TAGS) && !defined(CONFIG_SUN3)
/* If the phase is still MSGIN, the target wants to send some more
* messages. In case it supports tagged queuing, this is probably a
* SIMPLE_QUEUE_TAG for the I_T_L_Q nexus.
*/
tag = TAG_NONE;
- if (phase == PHASE_MSGIN && setup_use_tagged_queuing) {
+ if (phase == PHASE_MSGIN && (hostdata->flags & FLAG_TAGGED_QUEUING)) {
/* Accept previous IDENTIFY message by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
len = 2;
* just reestablished, and remove it from the disconnected queue.
*/
- for (tmp = (Scsi_Cmnd *) hostdata->disconnected_queue, prev = NULL;
+ for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue, prev = NULL;
tmp; prev = tmp, tmp = NEXT(tmp)) {
if ((target_mask == (1 << tmp->device->id)) && (lun == tmp->device->lun)
#ifdef SUPPORT_TAGS
&& (tag == tmp->tag)
#endif
) {
- /* ++guenther: prevent race with falcon_release_lock */
- falcon_dont_release++;
if (prev) {
REMOVE(prev, NEXT(prev), tmp, NEXT(tmp));
SET_NEXT(prev, NEXT(tmp));
return;
}
+#if defined(CONFIG_SUN3) && defined(REAL_DMA)
+ /* engage dma setup for the command we just saw */
+ {
+ void *d;
+ unsigned long count;
+
+ if (!tmp->SCp.this_residual && tmp->SCp.buffers_residual) {
+ count = tmp->SCp.buffer->length;
+ d = sg_virt(tmp->SCp.buffer);
+ } else {
+ count = tmp->SCp.this_residual;
+ d = tmp->SCp.ptr;
+ }
+ /* setup this command for dma if not already */
+ if ((count >= DMA_MIN_SIZE) && (sun3_dma_setup_done != tmp)) {
+ sun3scsi_dma_setup(d, count, rq_data_dir(tmp->request));
+ sun3_dma_setup_done = tmp;
+ }
+ }
+
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ACK);
+#endif
+
/* Accept message by clearing ACK */
NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+#if defined(SUPPORT_TAGS) && defined(CONFIG_SUN3)
+ /* If the phase is still MSGIN, the target wants to send some more
+ * messages. In case it supports tagged queuing, this is probably a
+ * SIMPLE_QUEUE_TAG for the I_T_L_Q nexus.
+ */
+ tag = TAG_NONE;
+ if (phase == PHASE_MSGIN && setup_use_tagged_queuing) {
+ /* Accept previous IDENTIFY message by clearing ACK */
+ NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
+ len = 2;
+ data = msg + 1;
+ if (!NCR5380_transfer_pio(instance, &phase, &len, &data) &&
+ msg[1] == SIMPLE_QUEUE_TAG)
+ tag = msg[2];
+ dprintk(NDEBUG_TAGS, "scsi%d: target mask %02x, lun %d sent tag %d at reselection\n"
+ HOSTNO, target_mask, lun, tag);
+ }
+#endif
+
hostdata->connected = tmp;
dprintk(NDEBUG_RESELECTION, "scsi%d: nexus established, target = %d, lun = %llu, tag = %d\n",
HOSTNO, tmp->device->id, tmp->device->lun, tmp->tag);
- falcon_dont_release--;
}
/*
- * Function : int NCR5380_abort (Scsi_Cmnd *cmd)
+ * Function : int NCR5380_abort (struct scsi_cmnd *cmd)
*
* Purpose : abort a command
*
- * Inputs : cmd - the Scsi_Cmnd to abort, code - code to set the
+ * Inputs : cmd - the scsi_cmnd to abort, code - code to set the
* host byte of the result field to, if zero DID_ABORTED is
* used.
*
- * Returns : 0 - success, -1 on failure.
+ * Returns : SUCCESS - success, FAILED on failure.
*
* XXX - there is no way to abort the command that is currently
* connected, you have to wait for it to complete. If this is
*/
static
-int NCR5380_abort(Scsi_Cmnd *cmd)
+int NCR5380_abort(struct scsi_cmnd *cmd)
{
struct Scsi_Host *instance = cmd->device->host;
SETUP_HOSTDATA(instance);
- Scsi_Cmnd *tmp, **prev;
+ struct scsi_cmnd *tmp, **prev;
unsigned long flags;
- printk(KERN_NOTICE "scsi%d: aborting command\n", HOSTNO);
- scsi_print_command(cmd);
+ scmd_printk(KERN_NOTICE, cmd, "aborting command\n");
NCR5380_print_status(instance);
local_irq_save(flags);
- if (!IS_A_TT() && !falcon_got_lock)
- printk(KERN_ERR "scsi%d: !!BINGO!! Falcon has no lock in NCR5380_abort\n",
- HOSTNO);
-
dprintk(NDEBUG_ABORT, "scsi%d: abort called basr 0x%02x, sr 0x%02x\n", HOSTNO,
NCR5380_read(BUS_AND_STATUS_REG),
NCR5380_read(STATUS_REG));
#else
hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
#endif
+ maybe_release_dma_irq(instance);
local_irq_restore(flags);
cmd->scsi_done(cmd);
- falcon_release_lock_if_possible(hostdata);
return SUCCESS;
} else {
-/* local_irq_restore(flags); */
+ local_irq_restore(flags);
printk("scsi%d: abort of connected command failed!\n", HOSTNO);
return FAILED;
}
* Case 2 : If the command hasn't been issued yet, we simply remove it
* from the issue queue.
*/
- for (prev = (Scsi_Cmnd **)&(hostdata->issue_queue),
- tmp = (Scsi_Cmnd *)hostdata->issue_queue;
+ for (prev = (struct scsi_cmnd **)&(hostdata->issue_queue),
+ tmp = (struct scsi_cmnd *)hostdata->issue_queue;
tmp; prev = NEXTADDR(tmp), tmp = NEXT(tmp)) {
if (cmd == tmp) {
REMOVE(5, *prev, tmp, NEXT(tmp));
(*prev) = NEXT(tmp);
SET_NEXT(tmp, NULL);
tmp->result = DID_ABORT << 16;
+ maybe_release_dma_irq(instance);
local_irq_restore(flags);
dprintk(NDEBUG_ABORT, "scsi%d: abort removed command from issue queue.\n",
HOSTNO);
/* Tagged queuing note: no tag to free here, hasn't been assigned
* yet... */
tmp->scsi_done(tmp);
- falcon_release_lock_if_possible(hostdata);
return SUCCESS;
}
}
* it from the disconnected queue.
*/
- for (tmp = (Scsi_Cmnd *) hostdata->disconnected_queue; tmp;
+ for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue; tmp;
tmp = NEXT(tmp)) {
if (cmd == tmp) {
local_irq_restore(flags);
dprintk(NDEBUG_ABORT, "scsi%d: aborting disconnected command.\n", HOSTNO);
- if (NCR5380_select(instance, cmd, (int)cmd->tag))
+ if (NCR5380_select(instance, cmd))
return FAILED;
dprintk(NDEBUG_ABORT, "scsi%d: nexus reestablished.\n", HOSTNO);
do_abort(instance);
local_irq_save(flags);
- for (prev = (Scsi_Cmnd **)&(hostdata->disconnected_queue),
- tmp = (Scsi_Cmnd *)hostdata->disconnected_queue;
+ for (prev = (struct scsi_cmnd **)&(hostdata->disconnected_queue),
+ tmp = (struct scsi_cmnd *)hostdata->disconnected_queue;
tmp; prev = NEXTADDR(tmp), tmp = NEXT(tmp)) {
if (cmd == tmp) {
REMOVE(5, *prev, tmp, NEXT(tmp));
#else
hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
#endif
+ maybe_release_dma_irq(instance);
local_irq_restore(flags);
tmp->scsi_done(tmp);
- falcon_release_lock_if_possible(hostdata);
return SUCCESS;
}
}
}
}
+ /* Maybe it is sufficient just to release the ST-DMA lock... (if
+ * possible at all) At least, we should check if the lock could be
+ * released after the abort, in case it is kept due to some bug.
+ */
+ maybe_release_dma_irq(instance);
+ local_irq_restore(flags);
+
/*
* Case 5 : If we reached this point, the command was not found in any of
* the queues.
* broke.
*/
- local_irq_restore(flags);
printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully before abortion\n", HOSTNO);
- /* Maybe it is sufficient just to release the ST-DMA lock... (if
- * possible at all) At least, we should check if the lock could be
- * released after the abort, in case it is kept due to some bug.
- */
- falcon_release_lock_if_possible(hostdata);
-
return FAILED;
}
/*
- * Function : int NCR5380_reset (Scsi_Cmnd *cmd)
+ * Function : int NCR5380_reset (struct scsi_cmnd *cmd)
*
* Purpose : reset the SCSI bus.
*
*
*/
-static int NCR5380_bus_reset(Scsi_Cmnd *cmd)
+static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
{
- SETUP_HOSTDATA(cmd->device->host);
+ struct Scsi_Host *instance = cmd->device->host;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
int i;
unsigned long flags;
-#if defined(RESET_RUN_DONE)
- Scsi_Cmnd *connected, *disconnected_queue;
-#endif
-
- if (!IS_A_TT() && !falcon_got_lock)
- printk(KERN_ERR "scsi%d: !!BINGO!! Falcon has no lock in NCR5380_reset\n",
- H_NO(cmd));
- NCR5380_print_status(cmd->device->host);
+ NCR5380_print_status(instance);
/* get in phase */
NCR5380_write(TARGET_COMMAND_REG,
* through anymore ... */
(void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- /* MSch 20140115 - looking at the generic NCR5380 driver, all of this
- * should go.
- * Catch-22: if we don't clear all queues, the SCSI driver lock will
- * not be reset by atari_scsi_reset()!
- */
-
-#if defined(RESET_RUN_DONE)
- /* XXX Should now be done by midlevel code, but it's broken XXX */
- /* XXX see below XXX */
-
- /* MSch: old-style reset: actually abort all command processing here */
-
- /* After the reset, there are no more connected or disconnected commands
- * and no busy units; to avoid problems with re-inserting the commands
- * into the issue_queue (via scsi_done()), the aborted commands are
- * remembered in local variables first.
- */
- local_irq_save(flags);
- connected = (Scsi_Cmnd *)hostdata->connected;
- hostdata->connected = NULL;
- disconnected_queue = (Scsi_Cmnd *)hostdata->disconnected_queue;
- hostdata->disconnected_queue = NULL;
-#ifdef SUPPORT_TAGS
- free_all_tags();
-#endif
- for (i = 0; i < 8; ++i)
- hostdata->busy[i] = 0;
-#ifdef REAL_DMA
- hostdata->dma_len = 0;
-#endif
- local_irq_restore(flags);
-
- /* In order to tell the mid-level code which commands were aborted,
- * set the command status to DID_RESET and call scsi_done() !!!
- * This ultimately aborts processing of these commands in the mid-level.
- */
-
- if ((cmd = connected)) {
- dprintk(NDEBUG_ABORT, "scsi%d: reset aborted a connected command\n", H_NO(cmd));
- cmd->result = (cmd->result & 0xffff) | (DID_RESET << 16);
- cmd->scsi_done(cmd);
- }
-
- for (i = 0; (cmd = disconnected_queue); ++i) {
- disconnected_queue = NEXT(cmd);
- SET_NEXT(cmd, NULL);
- cmd->result = (cmd->result & 0xffff) | (DID_RESET << 16);
- cmd->scsi_done(cmd);
- }
- if (i > 0)
- dprintk(NDEBUG_ABORT, "scsi: reset aborted %d disconnected command(s)\n", i);
-
- /* The Falcon lock should be released after a reset...
- */
- /* ++guenther: moved to atari_scsi_reset(), to prevent a race between
- * unlocking and enabling dma interrupt.
- */
-/* falcon_release_lock_if_possible( hostdata );*/
-
- /* since all commands have been explicitly terminated, we need to tell
- * the midlevel code that the reset was SUCCESSFUL, and there is no
- * need to 'wake up' the commands by a request_sense
- */
- return SUCCESS;
-#else /* 1 */
-
- /* MSch: new-style reset handling: let the mid-level do what it can */
-
- /* ++guenther: MID-LEVEL IS STILL BROKEN.
- * Mid-level is supposed to requeue all commands that were active on the
- * various low-level queues. In fact it does this, but that's not enough
- * because all these commands are subject to timeout. And if a timeout
- * happens for any removed command, *_abort() is called but all queues
- * are now empty. Abort then gives up the falcon lock, which is fatal,
- * since the mid-level will queue more commands and must have the lock
- * (it's all happening inside timer interrupt handler!!).
- * Even worse, abort will return NOT_RUNNING for all those commands not
- * on any queue, so they won't be retried ...
- *
- * Conclusion: either scsi.c disables timeout for all resetted commands
- * immediately, or we lose! As of linux-2.0.20 it doesn't.
- */
-
/* After the reset, there are no more connected or disconnected commands
* and no busy units; so clear the low-level status here to avoid
* conflicts when the mid-level code tries to wake up the affected
hostdata->connected = NULL;
hostdata->disconnected_queue = NULL;
#ifdef SUPPORT_TAGS
- free_all_tags();
+ free_all_tags(hostdata);
#endif
for (i = 0; i < 8; ++i)
hostdata->busy[i] = 0;
#ifdef REAL_DMA
hostdata->dma_len = 0;
#endif
+
+ maybe_release_dma_irq(instance);
local_irq_restore(flags);
- /* we did no complete reset of all commands, so a wakeup is required */
return SUCCESS;
-#endif /* 1 */
}
/**************************************************************************/
-
#include <linux/module.h>
-
-#define AUTOSENSE
-/* For the Atari version, use only polled IO or REAL_DMA */
-#define REAL_DMA
-/* Support tagged queuing? (on devices that are able to... :-) */
-#define SUPPORT_TAGS
-#define MAX_TAGS 32
-
#include <linux/types.h>
-#include <linux/stddef.h>
-#include <linux/ctype.h>
#include <linux/delay.h>
-#include <linux/mm.h>
#include <linux/blkdev.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/nvram.h>
#include <linux/bitops.h>
#include <linux/wait.h>
+#include <linux/platform_device.h>
#include <asm/setup.h>
#include <asm/atarihw.h>
#include <asm/atariints.h>
-#include <asm/page.h>
-#include <asm/pgtable.h>
-#include <asm/irq.h>
-#include <asm/traps.h>
-
-#include "scsi.h"
-#include <scsi/scsi_host.h>
-#include "atari_scsi.h"
-#include "NCR5380.h"
#include <asm/atari_stdma.h>
#include <asm/atari_stram.h>
#include <asm/io.h>
-#include <linux/stat.h>
+#include <scsi/scsi_host.h>
+
+/* Definitions for the core NCR5380 driver. */
+
+#define REAL_DMA
+#define SUPPORT_TAGS
+#define MAX_TAGS 32
+#define DMA_MIN_SIZE 32
+
+#define NCR5380_implementation_fields /* none */
+
+#define NCR5380_read(reg) atari_scsi_reg_read(reg)
+#define NCR5380_write(reg, value) atari_scsi_reg_write(reg, value)
+
+#define NCR5380_queue_command atari_scsi_queue_command
+#define NCR5380_abort atari_scsi_abort
+#define NCR5380_show_info atari_scsi_show_info
+#define NCR5380_info atari_scsi_info
+
+#define NCR5380_dma_read_setup(instance, data, count) \
+ atari_scsi_dma_setup(instance, data, count, 0)
+#define NCR5380_dma_write_setup(instance, data, count) \
+ atari_scsi_dma_setup(instance, data, count, 1)
+#define NCR5380_dma_residual(instance) \
+ atari_scsi_dma_residual(instance)
+#define NCR5380_dma_xfer_len(instance, cmd, phase) \
+ atari_dma_xfer_len(cmd->SCp.this_residual, cmd, !((phase) & SR_IO))
+
+#define NCR5380_acquire_dma_irq(instance) falcon_get_lock(instance)
+#define NCR5380_release_dma_irq(instance) falcon_release_lock()
+
+#include "NCR5380.h"
+
#define IS_A_TT() ATARIHW_PRESENT(TT_SCSI)
return adr;
}
-static inline void ENABLE_IRQ(void)
-{
- if (IS_A_TT())
- atari_enable_irq(IRQ_TT_MFP_SCSI);
- else
- atari_enable_irq(IRQ_MFP_FSCSI);
-}
-
-static inline void DISABLE_IRQ(void)
-{
- if (IS_A_TT())
- atari_disable_irq(IRQ_TT_MFP_SCSI);
- else
- atari_disable_irq(IRQ_MFP_FSCSI);
-}
-
-
#define HOSTDATA_DMALEN (((struct NCR5380_hostdata *) \
(atari_scsi_host->hostdata))->dma_len)
#define AFTER_RESET_DELAY (5*HZ/2)
#endif
-/***************************** Prototypes *****************************/
-
#ifdef REAL_DMA
-static int scsi_dma_is_ignored_buserr(unsigned char dma_stat);
static void atari_scsi_fetch_restbytes(void);
-static long atari_scsi_dma_residual(struct Scsi_Host *instance);
-static int falcon_classify_cmd(Scsi_Cmnd *cmd);
-static unsigned long atari_dma_xfer_len(unsigned long wanted_len,
- Scsi_Cmnd *cmd, int write_flag);
-#endif
-static irqreturn_t scsi_tt_intr(int irq, void *dummy);
-static irqreturn_t scsi_falcon_intr(int irq, void *dummy);
-static void falcon_release_lock_if_possible(struct NCR5380_hostdata *hostdata);
-static void falcon_get_lock(void);
-#ifdef CONFIG_ATARI_SCSI_RESET_BOOT
-static void atari_scsi_reset_boot(void);
#endif
-static unsigned char atari_scsi_tt_reg_read(unsigned char reg);
-static void atari_scsi_tt_reg_write(unsigned char reg, unsigned char value);
-static unsigned char atari_scsi_falcon_reg_read(unsigned char reg);
-static void atari_scsi_falcon_reg_write(unsigned char reg, unsigned char value);
-
-/************************* End of Prototypes **************************/
-
static struct Scsi_Host *atari_scsi_host;
static unsigned char (*atari_scsi_reg_read)(unsigned char reg);
/* mask for address bits that can't be used with the ST-DMA */
static unsigned long atari_dma_stram_mask;
#define STRAM_ADDR(a) (((a) & atari_dma_stram_mask) == 0)
-/* number of bytes to cut from a transfer to handle NCR overruns */
-static int atari_read_overruns;
#endif
static int setup_can_queue = -1;
NCR5380_intr(irq, dummy);
-#if 0
- /* To be sure the int is not masked */
- atari_enable_irq(IRQ_TT_MFP_SCSI);
-#endif
return IRQ_HANDLED;
}
#endif /* REAL_DMA */
-static int falcon_got_lock = 0;
-static DECLARE_WAIT_QUEUE_HEAD(falcon_fairness_wait);
-static int falcon_trying_lock = 0;
-static DECLARE_WAIT_QUEUE_HEAD(falcon_try_wait);
-static int falcon_dont_release = 0;
-
/* This function releases the lock on the DMA chip if there is no
- * connected command and the disconnected queue is empty. On
- * releasing, instances of falcon_get_lock are awoken, that put
- * themselves to sleep for fairness. They can now try to get the lock
- * again (but others waiting longer more probably will win).
+ * connected command and the disconnected queue is empty.
*/
-static void falcon_release_lock_if_possible(struct NCR5380_hostdata *hostdata)
+static void falcon_release_lock(void)
{
- unsigned long flags;
-
if (IS_A_TT())
return;
- local_irq_save(flags);
-
- if (falcon_got_lock && !hostdata->disconnected_queue &&
- !hostdata->issue_queue && !hostdata->connected) {
-
- if (falcon_dont_release) {
-#if 0
- printk("WARNING: Lock release not allowed. Ignored\n");
-#endif
- local_irq_restore(flags);
- return;
- }
- falcon_got_lock = 0;
+ if (stdma_is_locked_by(scsi_falcon_intr))
stdma_release();
- wake_up(&falcon_fairness_wait);
- }
-
- local_irq_restore(flags);
}
/* This function manages the locking of the ST-DMA.
* If the DMA isn't locked already for SCSI, it tries to lock it by
* calling stdma_lock(). But if the DMA is locked by the SCSI code and
* there are other drivers waiting for the chip, we do not issue the
- * command immediately but wait on 'falcon_fairness_queue'. We will be
- * waked up when the DMA is unlocked by some SCSI interrupt. After that
- * we try to get the lock again.
- * But we must be prepared that more than one instance of
- * falcon_get_lock() is waiting on the fairness queue. They should not
- * try all at once to call stdma_lock(), one is enough! For that, the
- * first one sets 'falcon_trying_lock', others that see that variable
- * set wait on the queue 'falcon_try_wait'.
- * Complicated, complicated.... Sigh...
+ * command immediately but tell the SCSI mid-layer to defer.
*/
-static void falcon_get_lock(void)
+static int falcon_get_lock(struct Scsi_Host *instance)
{
- unsigned long flags;
-
if (IS_A_TT())
- return;
-
- local_irq_save(flags);
-
- wait_event_cmd(falcon_fairness_wait,
- in_interrupt() || !falcon_got_lock || !stdma_others_waiting(),
- local_irq_restore(flags),
- local_irq_save(flags));
-
- while (!falcon_got_lock) {
- if (in_irq())
- panic("Falcon SCSI hasn't ST-DMA lock in interrupt");
- if (!falcon_trying_lock) {
- falcon_trying_lock = 1;
- stdma_lock(scsi_falcon_intr, NULL);
- falcon_got_lock = 1;
- falcon_trying_lock = 0;
- wake_up(&falcon_try_wait);
- } else {
- wait_event_cmd(falcon_try_wait,
- falcon_got_lock && !falcon_trying_lock,
- local_irq_restore(flags),
- local_irq_save(flags));
- }
- }
-
- local_irq_restore(flags);
- if (!falcon_got_lock)
- panic("Falcon SCSI: someone stole the lock :-(\n");
-}
-
-
-static int __init atari_scsi_detect(struct scsi_host_template *host)
-{
- static int called = 0;
- struct Scsi_Host *instance;
-
- if (!MACH_IS_ATARI ||
- (!ATARIHW_PRESENT(ST_SCSI) && !ATARIHW_PRESENT(TT_SCSI)) ||
- called)
- return 0;
-
- host->proc_name = "Atari";
-
- atari_scsi_reg_read = IS_A_TT() ? atari_scsi_tt_reg_read :
- atari_scsi_falcon_reg_read;
- atari_scsi_reg_write = IS_A_TT() ? atari_scsi_tt_reg_write :
- atari_scsi_falcon_reg_write;
-
- /* setup variables */
- host->can_queue =
- (setup_can_queue > 0) ? setup_can_queue :
- IS_A_TT() ? ATARI_TT_CAN_QUEUE : ATARI_FALCON_CAN_QUEUE;
- host->cmd_per_lun =
- (setup_cmd_per_lun > 0) ? setup_cmd_per_lun :
- IS_A_TT() ? ATARI_TT_CMD_PER_LUN : ATARI_FALCON_CMD_PER_LUN;
- /* Force sg_tablesize to 0 on a Falcon! */
- host->sg_tablesize =
- !IS_A_TT() ? ATARI_FALCON_SG_TABLESIZE :
- (setup_sg_tablesize >= 0) ? setup_sg_tablesize : ATARI_TT_SG_TABLESIZE;
-
- if (setup_hostid >= 0)
- host->this_id = setup_hostid;
- else {
- /* use 7 as default */
- host->this_id = 7;
- /* Test if a host id is set in the NVRam */
- if (ATARIHW_PRESENT(TT_CLK) && nvram_check_checksum()) {
- unsigned char b = nvram_read_byte( 14 );
- /* Arbitration enabled? (for TOS) If yes, use configured host ID */
- if (b & 0x80)
- host->this_id = b & 7;
- }
- }
+ return 1;
-#ifdef SUPPORT_TAGS
- if (setup_use_tagged_queuing < 0)
- setup_use_tagged_queuing = DEFAULT_USE_TAGGED_QUEUING;
-#endif
-#ifdef REAL_DMA
- /* If running on a Falcon and if there's TT-Ram (i.e., more than one
- * memory block, since there's always ST-Ram in a Falcon), then allocate a
- * STRAM_BUFFER_SIZE byte dribble buffer for transfers from/to alternative
- * Ram.
- */
- if (MACH_IS_ATARI && ATARIHW_PRESENT(ST_SCSI) &&
- !ATARIHW_PRESENT(EXTD_DMA) && m68k_num_memory > 1) {
- atari_dma_buffer = atari_stram_alloc(STRAM_BUFFER_SIZE, "SCSI");
- if (!atari_dma_buffer) {
- printk(KERN_ERR "atari_scsi_detect: can't allocate ST-RAM "
- "double buffer\n");
- return 0;
- }
- atari_dma_phys_buffer = atari_stram_to_phys(atari_dma_buffer);
- atari_dma_orig_addr = 0;
- }
-#endif
- instance = scsi_register(host, sizeof(struct NCR5380_hostdata));
- if (instance == NULL) {
- atari_stram_free(atari_dma_buffer);
- atari_dma_buffer = 0;
- return 0;
- }
- atari_scsi_host = instance;
- /*
- * Set irq to 0, to avoid that the mid-level code disables our interrupt
- * during queue_command calls. This is completely unnecessary, and even
- * worse causes bad problems on the Falcon, where the int is shared with
- * IDE and floppy!
- */
- instance->irq = 0;
-
-#ifdef CONFIG_ATARI_SCSI_RESET_BOOT
- atari_scsi_reset_boot();
-#endif
- NCR5380_init(instance, 0);
-
- if (IS_A_TT()) {
-
- /* This int is actually "pseudo-slow", i.e. it acts like a slow
- * interrupt after having cleared the pending flag for the DMA
- * interrupt. */
- if (request_irq(IRQ_TT_MFP_SCSI, scsi_tt_intr, IRQ_TYPE_SLOW,
- "SCSI NCR5380", instance)) {
- printk(KERN_ERR "atari_scsi_detect: cannot allocate irq %d, aborting",IRQ_TT_MFP_SCSI);
- scsi_unregister(atari_scsi_host);
- atari_stram_free(atari_dma_buffer);
- atari_dma_buffer = 0;
- return 0;
- }
- tt_mfp.active_edge |= 0x80; /* SCSI int on L->H */
-#ifdef REAL_DMA
- tt_scsi_dma.dma_ctrl = 0;
- atari_dma_residual = 0;
-
- if (MACH_IS_MEDUSA) {
- /* While the read overruns (described by Drew Eckhardt in
- * NCR5380.c) never happened on TTs, they do in fact on the Medusa
- * (This was the cause why SCSI didn't work right for so long
- * there.) Since handling the overruns slows down a bit, I turned
- * the #ifdef's into a runtime condition.
- *
- * In principle it should be sufficient to do max. 1 byte with
- * PIO, but there is another problem on the Medusa with the DMA
- * rest data register. So 'atari_read_overruns' is currently set
- * to 4 to avoid having transfers that aren't a multiple of 4. If
- * the rest data bug is fixed, this can be lowered to 1.
- */
- atari_read_overruns = 4;
- }
-#endif /*REAL_DMA*/
- } else { /* ! IS_A_TT */
-
- /* Nothing to do for the interrupt: the ST-DMA is initialized
- * already by atari_init_INTS()
- */
-
-#ifdef REAL_DMA
- atari_dma_residual = 0;
- atari_dma_active = 0;
- atari_dma_stram_mask = (ATARIHW_PRESENT(EXTD_DMA) ? 0x00000000
- : 0xff000000);
-#endif
- }
+ if (in_interrupt())
+ return stdma_try_lock(scsi_falcon_intr, instance);
- printk(KERN_INFO "scsi%d: options CAN_QUEUE=%d CMD_PER_LUN=%d SCAT-GAT=%d "
-#ifdef SUPPORT_TAGS
- "TAGGED-QUEUING=%s "
-#endif
- "HOSTID=%d",
- instance->host_no, instance->hostt->can_queue,
- instance->hostt->cmd_per_lun,
- instance->hostt->sg_tablesize,
-#ifdef SUPPORT_TAGS
- setup_use_tagged_queuing ? "yes" : "no",
-#endif
- instance->hostt->this_id );
- NCR5380_print_options(instance);
- printk("\n");
-
- called = 1;
- return 1;
-}
-
-static int atari_scsi_release(struct Scsi_Host *sh)
-{
- if (IS_A_TT())
- free_irq(IRQ_TT_MFP_SCSI, sh);
- if (atari_dma_buffer)
- atari_stram_free(atari_dma_buffer);
- NCR5380_exit(sh);
+ stdma_lock(scsi_falcon_intr, instance);
return 1;
}
{
/* Format of atascsi parameter is:
* atascsi=<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
- * Defaults depend on TT or Falcon, hostid determined at run time.
+ * Defaults depend on TT or Falcon, determined at run time.
* Negative values mean don't change.
*/
int ints[6];
printk("atari_scsi_setup: no arguments!\n");
return 0;
}
-
- if (ints[0] >= 1) {
- if (ints[1] > 0)
- /* no limits on this, just > 0 */
- setup_can_queue = ints[1];
- }
- if (ints[0] >= 2) {
- if (ints[2] > 0)
- setup_cmd_per_lun = ints[2];
- }
- if (ints[0] >= 3) {
- if (ints[3] >= 0) {
- setup_sg_tablesize = ints[3];
- /* Must be <= SG_ALL (255) */
- if (setup_sg_tablesize > SG_ALL)
- setup_sg_tablesize = SG_ALL;
- }
- }
- if (ints[0] >= 4) {
- /* Must be between 0 and 7 */
- if (ints[4] >= 0 && ints[4] <= 7)
- setup_hostid = ints[4];
- else if (ints[4] > 7)
- printk("atari_scsi_setup: invalid host ID %d !\n", ints[4]);
- }
+ if (ints[0] >= 1)
+ setup_can_queue = ints[1];
+ if (ints[0] >= 2)
+ setup_cmd_per_lun = ints[2];
+ if (ints[0] >= 3)
+ setup_sg_tablesize = ints[3];
+ if (ints[0] >= 4)
+ setup_hostid = ints[4];
#ifdef SUPPORT_TAGS
- if (ints[0] >= 5) {
- if (ints[5] >= 0)
- setup_use_tagged_queuing = !!ints[5];
- }
+ if (ints[0] >= 5)
+ setup_use_tagged_queuing = ints[5];
#endif
return 1;
__setup("atascsi=", atari_scsi_setup);
#endif /* !MODULE */
-static int atari_scsi_bus_reset(Scsi_Cmnd *cmd)
-{
- int rv;
- struct NCR5380_hostdata *hostdata =
- (struct NCR5380_hostdata *)cmd->device->host->hostdata;
-
- /* For doing the reset, SCSI interrupts must be disabled first,
- * since the 5380 raises its IRQ line while _RST is active and we
- * can't disable interrupts completely, since we need the timer.
- */
- /* And abort a maybe active DMA transfer */
- if (IS_A_TT()) {
- atari_turnoff_irq(IRQ_TT_MFP_SCSI);
-#ifdef REAL_DMA
- tt_scsi_dma.dma_ctrl = 0;
-#endif /* REAL_DMA */
- } else {
- atari_turnoff_irq(IRQ_MFP_FSCSI);
-#ifdef REAL_DMA
- st_dma.dma_mode_status = 0x90;
- atari_dma_active = 0;
- atari_dma_orig_addr = NULL;
-#endif /* REAL_DMA */
- }
-
- rv = NCR5380_bus_reset(cmd);
-
- /* Re-enable ints */
- if (IS_A_TT()) {
- atari_turnon_irq(IRQ_TT_MFP_SCSI);
- } else {
- atari_turnon_irq(IRQ_MFP_FSCSI);
- }
- if (rv == SUCCESS)
- falcon_release_lock_if_possible(hostdata);
-
- return rv;
-}
-
#ifdef CONFIG_ATARI_SCSI_RESET_BOOT
static void __init atari_scsi_reset_boot(void)
}
#endif
-
-static const char *atari_scsi_info(struct Scsi_Host *host)
-{
- /* atari_scsi_detect() is verbose enough... */
- static const char string[] = "Atari native SCSI";
- return string;
-}
-
-
#if defined(REAL_DMA)
static unsigned long atari_scsi_dma_setup(struct Scsi_Host *instance,
#define CMD_SURELY_BYTE_MODE 1
#define CMD_MODE_UNKNOWN 2
-static int falcon_classify_cmd(Scsi_Cmnd *cmd)
+static int falcon_classify_cmd(struct scsi_cmnd *cmd)
{
unsigned char opcode = cmd->cmnd[0];
*/
static unsigned long atari_dma_xfer_len(unsigned long wanted_len,
- Scsi_Cmnd *cmd, int write_flag)
+ struct scsi_cmnd *cmd, int write_flag)
{
unsigned long possible_len, limit;
#include "atari_NCR5380.c"
-static struct scsi_host_template driver_template = {
+static int atari_scsi_bus_reset(struct scsi_cmnd *cmd)
+{
+ int rv;
+ unsigned long flags;
+
+ local_irq_save(flags);
+
+#ifdef REAL_DMA
+ /* Abort a maybe active DMA transfer */
+ if (IS_A_TT()) {
+ tt_scsi_dma.dma_ctrl = 0;
+ } else {
+ st_dma.dma_mode_status = 0x90;
+ atari_dma_active = 0;
+ atari_dma_orig_addr = NULL;
+ }
+#endif
+
+ rv = NCR5380_bus_reset(cmd);
+
+ /* The 5380 raises its IRQ line while _RST is active but the ST DMA
+ * "lock" has been released so this interrupt may end up handled by
+ * floppy or IDE driver (if one of them holds the lock). The NCR5380
+ * interrupt flag has been cleared already.
+ */
+
+ local_irq_restore(flags);
+
+ return rv;
+}
+
+#define DRV_MODULE_NAME "atari_scsi"
+#define PFX DRV_MODULE_NAME ": "
+
+static struct scsi_host_template atari_scsi_template = {
+ .module = THIS_MODULE,
+ .proc_name = DRV_MODULE_NAME,
.show_info = atari_scsi_show_info,
.name = "Atari native SCSI",
- .detect = atari_scsi_detect,
- .release = atari_scsi_release,
.info = atari_scsi_info,
.queuecommand = atari_scsi_queue_command,
.eh_abort_handler = atari_scsi_abort,
.eh_bus_reset_handler = atari_scsi_bus_reset,
- .can_queue = 0, /* initialized at run-time */
- .this_id = 0, /* initialized at run-time */
- .sg_tablesize = 0, /* initialized at run-time */
- .cmd_per_lun = 0, /* initialized at run-time */
+ .this_id = 7,
.use_clustering = DISABLE_CLUSTERING
};
+static int __init atari_scsi_probe(struct platform_device *pdev)
+{
+ struct Scsi_Host *instance;
+ int error;
+ struct resource *irq;
+ int host_flags = 0;
+
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ if (!irq)
+ return -ENODEV;
+
+ if (ATARIHW_PRESENT(TT_SCSI)) {
+ atari_scsi_reg_read = atari_scsi_tt_reg_read;
+ atari_scsi_reg_write = atari_scsi_tt_reg_write;
+ } else {
+ atari_scsi_reg_read = atari_scsi_falcon_reg_read;
+ atari_scsi_reg_write = atari_scsi_falcon_reg_write;
+ }
+
+ /* The values for CMD_PER_LUN and CAN_QUEUE are somehow arbitrary.
+ * Higher values should work, too; try it!
+ * (But cmd_per_lun costs memory!)
+ *
+ * But there seems to be a bug somewhere that requires CAN_QUEUE to be
+ * 2*CMD_PER_LUN. At least on a TT, no spurious timeouts seen since
+ * changed CMD_PER_LUN...
+ *
+ * Note: The Falcon currently uses 8/1 setting due to unsolved problems
+ * with cmd_per_lun != 1
+ */
+ if (ATARIHW_PRESENT(TT_SCSI)) {
+ atari_scsi_template.can_queue = 16;
+ atari_scsi_template.cmd_per_lun = 8;
+ atari_scsi_template.sg_tablesize = SG_ALL;
+ } else {
+ atari_scsi_template.can_queue = 8;
+ atari_scsi_template.cmd_per_lun = 1;
+ atari_scsi_template.sg_tablesize = SG_NONE;
+ }
+
+ if (setup_can_queue > 0)
+ atari_scsi_template.can_queue = setup_can_queue;
+
+ if (setup_cmd_per_lun > 0)
+ atari_scsi_template.cmd_per_lun = setup_cmd_per_lun;
+
+ /* Leave sg_tablesize at 0 on a Falcon! */
+ if (ATARIHW_PRESENT(TT_SCSI) && setup_sg_tablesize >= 0)
+ atari_scsi_template.sg_tablesize = setup_sg_tablesize;
+
+ if (setup_hostid >= 0) {
+ atari_scsi_template.this_id = setup_hostid & 7;
+ } else {
+ /* Test if a host id is set in the NVRam */
+ if (ATARIHW_PRESENT(TT_CLK) && nvram_check_checksum()) {
+ unsigned char b = nvram_read_byte(14);
+
+ /* Arbitration enabled? (for TOS)
+ * If yes, use configured host ID
+ */
+ if (b & 0x80)
+ atari_scsi_template.this_id = b & 7;
+ }
+ }
+
+
+#ifdef REAL_DMA
+ /* If running on a Falcon and if there's TT-Ram (i.e., more than one
+ * memory block, since there's always ST-Ram in a Falcon), then
+ * allocate a STRAM_BUFFER_SIZE byte dribble buffer for transfers
+ * from/to alternative Ram.
+ */
+ if (ATARIHW_PRESENT(ST_SCSI) && !ATARIHW_PRESENT(EXTD_DMA) &&
+ m68k_num_memory > 1) {
+ atari_dma_buffer = atari_stram_alloc(STRAM_BUFFER_SIZE, "SCSI");
+ if (!atari_dma_buffer) {
+ pr_err(PFX "can't allocate ST-RAM double buffer\n");
+ return -ENOMEM;
+ }
+ atari_dma_phys_buffer = atari_stram_to_phys(atari_dma_buffer);
+ atari_dma_orig_addr = 0;
+ }
+#endif
+
+ instance = scsi_host_alloc(&atari_scsi_template,
+ sizeof(struct NCR5380_hostdata));
+ if (!instance) {
+ error = -ENOMEM;
+ goto fail_alloc;
+ }
+ atari_scsi_host = instance;
+
+#ifdef CONFIG_ATARI_SCSI_RESET_BOOT
+ atari_scsi_reset_boot();
+#endif
+
+ instance->irq = irq->start;
+
+ host_flags |= IS_A_TT() ? 0 : FLAG_LATE_DMA_SETUP;
+
+#ifdef SUPPORT_TAGS
+ host_flags |= setup_use_tagged_queuing > 0 ? FLAG_TAGGED_QUEUING : 0;
+#endif
+
+ NCR5380_init(instance, host_flags);
+
+ if (IS_A_TT()) {
+ error = request_irq(instance->irq, scsi_tt_intr, 0,
+ "NCR5380", instance);
+ if (error) {
+ pr_err(PFX "request irq %d failed, aborting\n",
+ instance->irq);
+ goto fail_irq;
+ }
+ tt_mfp.active_edge |= 0x80; /* SCSI int on L->H */
+#ifdef REAL_DMA
+ tt_scsi_dma.dma_ctrl = 0;
+ atari_dma_residual = 0;
+
+ /* While the read overruns (described by Drew Eckhardt in
+ * NCR5380.c) never happened on TTs, they do in fact on the
+ * Medusa (This was the cause why SCSI didn't work right for
+ * so long there.) Since handling the overruns slows down
+ * a bit, I turned the #ifdef's into a runtime condition.
+ *
+ * In principle it should be sufficient to do max. 1 byte with
+ * PIO, but there is another problem on the Medusa with the DMA
+ * rest data register. So read_overruns is currently set
+ * to 4 to avoid having transfers that aren't a multiple of 4.
+ * If the rest data bug is fixed, this can be lowered to 1.
+ */
+ if (MACH_IS_MEDUSA) {
+ struct NCR5380_hostdata *hostdata =
+ shost_priv(instance);
+
+ hostdata->read_overruns = 4;
+ }
+#endif
+ } else {
+ /* Nothing to do for the interrupt: the ST-DMA is initialized
+ * already.
+ */
+#ifdef REAL_DMA
+ atari_dma_residual = 0;
+ atari_dma_active = 0;
+ atari_dma_stram_mask = (ATARIHW_PRESENT(EXTD_DMA) ? 0x00000000
+ : 0xff000000);
+#endif
+ }
+
+ error = scsi_add_host(instance, NULL);
+ if (error)
+ goto fail_host;
+
+ platform_set_drvdata(pdev, instance);
+
+ scsi_scan_host(instance);
+ return 0;
+
+fail_host:
+ if (IS_A_TT())
+ free_irq(instance->irq, instance);
+fail_irq:
+ NCR5380_exit(instance);
+ scsi_host_put(instance);
+fail_alloc:
+ if (atari_dma_buffer)
+ atari_stram_free(atari_dma_buffer);
+ return error;
+}
+
+static int __exit atari_scsi_remove(struct platform_device *pdev)
+{
+ struct Scsi_Host *instance = platform_get_drvdata(pdev);
+
+ scsi_remove_host(instance);
+ if (IS_A_TT())
+ free_irq(instance->irq, instance);
+ NCR5380_exit(instance);
+ scsi_host_put(instance);
+ if (atari_dma_buffer)
+ atari_stram_free(atari_dma_buffer);
+ return 0;
+}
+
+static struct platform_driver atari_scsi_driver = {
+ .remove = __exit_p(atari_scsi_remove),
+ .driver = {
+ .name = DRV_MODULE_NAME,
+ .owner = THIS_MODULE,
+ },
+};
-#include "scsi_module.c"
+module_platform_driver_probe(atari_scsi_driver, atari_scsi_probe);
+MODULE_ALIAS("platform:" DRV_MODULE_NAME);
MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * atari_scsi.h -- Header file for the Atari native SCSI driver
- *
- * Copyright 1994 Roman Hodek <Roman.Hodek@informatik.uni-erlangen.de>
- *
- * (Loosely based on the work of Robert De Vries' team)
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive
- * for more details.
- *
- */
-
-
-#ifndef ATARI_SCSI_H
-#define ATARI_SCSI_H
-
-/* (I_HAVE_OVERRUNS stuff removed) */
-
-#ifndef ASM
-/* The values for CMD_PER_LUN and CAN_QUEUE are somehow arbitrary. Higher
- * values should work, too; try it! (but cmd_per_lun costs memory!) */
-
-/* But there seems to be a bug somewhere that requires CAN_QUEUE to be
- * 2*CMD_PER_LUN. At least on a TT, no spurious timeouts seen since
- * changed CMD_PER_LUN... */
-
-/* Note: The Falcon currently uses 8/1 setting due to unsolved problems with
- * cmd_per_lun != 1 */
-
-#define ATARI_TT_CAN_QUEUE 16
-#define ATARI_TT_CMD_PER_LUN 8
-#define ATARI_TT_SG_TABLESIZE SG_ALL
-
-#define ATARI_FALCON_CAN_QUEUE 8
-#define ATARI_FALCON_CMD_PER_LUN 1
-#define ATARI_FALCON_SG_TABLESIZE SG_NONE
-
-#define DEFAULT_USE_TAGGED_QUEUING 0
-
-
-#define NCR5380_implementation_fields /* none */
-
-#define NCR5380_read(reg) atari_scsi_reg_read( reg )
-#define NCR5380_write(reg, value) atari_scsi_reg_write( reg, value )
-
-#define NCR5380_intr atari_scsi_intr
-#define NCR5380_queue_command atari_scsi_queue_command
-#define NCR5380_abort atari_scsi_abort
-#define NCR5380_show_info atari_scsi_show_info
-#define NCR5380_dma_read_setup(inst,d,c) atari_scsi_dma_setup (inst, d, c, 0)
-#define NCR5380_dma_write_setup(inst,d,c) atari_scsi_dma_setup (inst, d, c, 1)
-#define NCR5380_dma_residual(inst) atari_scsi_dma_residual( inst )
-#define NCR5380_dma_xfer_len(i,cmd,phase) \
- atari_dma_xfer_len(cmd->SCp.this_residual,cmd,((phase) & SR_IO) ? 0 : 1)
-
-#endif /* ndef ASM */
-#endif /* ATARI_SCSI_H */
-
-
.name = "Emulex 10Gbe open-iscsi Initiator Driver",
.proc_name = DRV_NAME,
.queuecommand = iscsi_queuecommand,
- .change_queue_depth = iscsi_change_queue_depth,
+ .change_queue_depth = scsi_change_queue_depth,
.slave_configure = beiscsi_slave_configure,
.target_alloc = iscsi_target_alloc,
.eh_abort_handler = beiscsi_eh_abort,
.cmd_per_lun = BEISCSI_CMD_PER_LUN,
.use_clustering = ENABLE_CLUSTERING,
.vendor_id = SCSI_NL_VID_TYPE_PCI | BE_VENDOR_ID,
-
+ .track_queue_depth = 1,
};
static struct scsi_transport_template *beiscsi_scsi_transport;
unsigned long flags;
void *kern_buf;
- kern_buf = kzalloc(nbytes, GFP_KERNEL);
-
- if (!kern_buf) {
- printk(KERN_INFO "bfad[%d]: Failed to allocate buffer\n",
- bfad->inst_no);
- return -ENOMEM;
- }
-
- if (copy_from_user(kern_buf, (void __user *)buf, nbytes)) {
- kfree(kern_buf);
- return -ENOMEM;
- }
+ kern_buf = memdup_user(buf, nbytes);
+ if (IS_ERR(kern_buf))
+ return PTR_ERR(kern_buf);
rc = sscanf(kern_buf, "%x:%x", &addr, &len);
if (rc < 2) {
unsigned long flags;
void *kern_buf;
- kern_buf = kzalloc(nbytes, GFP_KERNEL);
-
- if (!kern_buf) {
- printk(KERN_INFO "bfad[%d]: Failed to allocate buffer\n",
- bfad->inst_no);
- return -ENOMEM;
- }
-
- if (copy_from_user(kern_buf, (void __user *)buf, nbytes)) {
- kfree(kern_buf);
- return -ENOMEM;
- }
+ kern_buf = memdup_user(buf, nbytes);
+ if (IS_ERR(kern_buf))
+ return PTR_ERR(kern_buf);
rc = sscanf(kern_buf, "%x:%x", &addr, &val);
if (rc < 2) {
static int
bfad_im_slave_configure(struct scsi_device *sdev)
{
- if (sdev->tagged_supported)
- scsi_activate_tcq(sdev, bfa_lun_queue_depth);
- else
- scsi_deactivate_tcq(sdev, bfa_lun_queue_depth);
-
+ scsi_change_queue_depth(sdev, bfa_lun_queue_depth);
return 0;
}
.shost_attrs = bfad_im_host_attrs,
.max_sectors = BFAD_MAX_SECTORS,
.vendor_id = BFA_PCI_VENDOR_ID_BROCADE,
+ .use_blk_tags = 1,
};
struct scsi_host_template bfad_im_vport_template = {
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = bfad_im_vport_attrs,
.max_sectors = BFAD_MAX_SECTORS,
+ .use_blk_tags = 1,
};
bfa_status_t
if (bfa_lun_queue_depth > tmp_sdev->queue_depth) {
if (tmp_sdev->id != sdev->id)
continue;
- if (tmp_sdev->ordered_tags)
- scsi_adjust_queue_depth(tmp_sdev,
- MSG_ORDERED_TAG,
- tmp_sdev->queue_depth + 1);
- else
- scsi_adjust_queue_depth(tmp_sdev,
- MSG_SIMPLE_TAG,
- tmp_sdev->queue_depth + 1);
+ scsi_change_queue_depth(tmp_sdev,
+ tmp_sdev->queue_depth + 1);
itnim->last_ramp_up_time = jiffies;
}
bnx2fc_initiate_cleanup(orig_io_req);
/* Post a new IO req with the same sc_cmd */
BNX2FC_IO_DBG(rec_req, "Post IO request again\n");
- spin_unlock_bh(&tgt->tgt_lock);
rc = bnx2fc_post_io_req(tgt, new_io_req);
- spin_lock_bh(&tgt->tgt_lock);
if (!rc)
goto free_frame;
BNX2FC_IO_DBG(rec_req, "REC: io post err\n");
struct fc_frame_header *fh;
struct fcoe_rcv_info *fr;
struct fcoe_percpu_s *bg;
+ struct sk_buff *tmp_skb;
unsigned short oxid;
interface = container_of(ptype, struct bnx2fc_interface,
goto err;
}
+ tmp_skb = skb_share_check(skb, GFP_ATOMIC);
+ if (!tmp_skb)
+ goto err;
+
+ skb = tmp_skb;
+
if (unlikely(eth_hdr(skb)->h_proto != htons(ETH_P_FCOE))) {
printk(KERN_ERR PFX "bnx2fc_rcv: Wrong FC type frame\n");
goto err;
mutex_unlock(&bnx2fc_dev_lock);
rtnl_unlock();
- if (IS_ERR(vn_port)) {
+ if (!vn_port) {
printk(KERN_ERR PFX "bnx2fc_vport_create (%s) failed\n",
netdev->name);
return -EIO;
interface = bnx2fc_interface_create(hba, netdev, fip_mode);
if (!interface) {
printk(KERN_ERR PFX "bnx2fc_interface_create failed\n");
+ rc = -ENOMEM;
goto ifput_err;
}
.eh_target_reset_handler = bnx2fc_eh_target_reset, /* tgt reset */
.eh_host_reset_handler = fc_eh_host_reset,
.slave_alloc = fc_slave_alloc,
- .change_queue_depth = fc_change_queue_depth,
- .change_queue_type = fc_change_queue_type,
+ .change_queue_depth = scsi_change_queue_depth,
+ .change_queue_type = scsi_change_queue_type,
.this_id = -1,
.cmd_per_lun = 3,
.use_clustering = ENABLE_CLUSTERING,
.sg_tablesize = BNX2FC_MAX_BDS_PER_CMD,
.max_sectors = 1024,
+ .use_blk_tags = 1,
+ .track_queue_depth = 1,
};
static struct libfc_function_template bnx2fc_libfc_fcn_templ = {
struct fcp_cmnd *fcp_cmnd)
{
struct scsi_cmnd *sc_cmd = io_req->sc_cmd;
- char tag[2];
memset(fcp_cmnd, 0, sizeof(struct fcp_cmnd));
fcp_cmnd->fc_tm_flags = io_req->mp_req.tm_flags;
fcp_cmnd->fc_flags = io_req->io_req_flags;
- if (scsi_populate_tag_msg(sc_cmd, tag)) {
- switch (tag[0]) {
- case HEAD_OF_QUEUE_TAG:
- fcp_cmnd->fc_pri_ta = FCP_PTA_HEADQ;
- break;
- case ORDERED_QUEUE_TAG:
- fcp_cmnd->fc_pri_ta = FCP_PTA_ORDERED;
- break;
- default:
- fcp_cmnd->fc_pri_ta = FCP_PTA_SIMPLE;
- break;
- }
- } else {
+ if (sc_cmd->flags & SCMD_TAGGED)
+ fcp_cmnd->fc_pri_ta = FCP_PTA_SIMPLE;
+ else
fcp_cmnd->fc_pri_ta = 0;
- }
}
static void bnx2fc_parse_fcp_rsp(struct bnx2fc_cmd *io_req,
goto exit_qcmd;
}
}
+
+ spin_lock_bh(&tgt->tgt_lock);
+
io_req = bnx2fc_cmd_alloc(tgt);
if (!io_req) {
rc = SCSI_MLQUEUE_HOST_BUSY;
- goto exit_qcmd;
+ goto exit_qcmd_tgtlock;
}
io_req->sc_cmd = sc_cmd;
if (bnx2fc_post_io_req(tgt, io_req)) {
printk(KERN_ERR PFX "Unable to post io_req\n");
rc = SCSI_MLQUEUE_HOST_BUSY;
- goto exit_qcmd;
+ goto exit_qcmd_tgtlock;
}
+
+exit_qcmd_tgtlock:
+ spin_unlock_bh(&tgt->tgt_lock);
exit_qcmd:
return rc;
}
int task_idx, index;
u16 xid;
+ /* bnx2fc_post_io_req() is called with the tgt_lock held */
+
/* Initialize rest of io_req fields */
io_req->cmd_type = BNX2FC_SCSI_CMD;
io_req->port = port;
/* Build buffer descriptor list for firmware from sg list */
if (bnx2fc_build_bd_list_from_sg(io_req)) {
printk(KERN_ERR PFX "BD list creation failed\n");
- spin_lock_bh(&tgt->tgt_lock);
kref_put(&io_req->refcount, bnx2fc_cmd_release);
- spin_unlock_bh(&tgt->tgt_lock);
return -EAGAIN;
}
task = &(task_page[index]);
bnx2fc_init_task(io_req, task);
- spin_lock_bh(&tgt->tgt_lock);
-
if (tgt->flush_in_prog) {
printk(KERN_ERR PFX "Flush in progress..Host Busy\n");
kref_put(&io_req->refcount, bnx2fc_cmd_release);
- spin_unlock_bh(&tgt->tgt_lock);
return -EAGAIN;
}
if (!test_bit(BNX2FC_FLAG_SESSION_READY, &tgt->flags)) {
printk(KERN_ERR PFX "Session not ready...post_io\n");
kref_put(&io_req->refcount, bnx2fc_cmd_release);
- spin_unlock_bh(&tgt->tgt_lock);
return -EAGAIN;
}
/* Ring doorbell */
bnx2fc_ring_doorbell(tgt);
- spin_unlock_bh(&tgt->tgt_lock);
return 0;
}
.eh_abort_handler = iscsi_eh_abort,
.eh_device_reset_handler = iscsi_eh_device_reset,
.eh_target_reset_handler = iscsi_eh_recover_target,
- .change_queue_depth = iscsi_change_queue_depth,
+ .change_queue_depth = scsi_change_queue_depth,
.target_alloc = iscsi_target_alloc,
.can_queue = 2048,
.max_sectors = 127,
.use_clustering = ENABLE_CLUSTERING,
.sg_tablesize = ISCSI_MAX_BDS_PER_CMD,
.shost_attrs = bnx2i_dev_attributes,
+ .track_queue_depth = 1,
};
struct iscsi_transport bnx2i_iscsi_transport = {
// module_param_string_array(vendor_labels, NULL, 0444);
#define ch_printk(prefix, ch, fmt, a...) \
- sdev_printk(prefix, (ch)->device, "[%s] " fmt, \
- (ch)->name, ##a)
+ sdev_prefix_printk(prefix, (ch)->device, (ch)->name, fmt, ##a)
#define DPRINTK(fmt, arg...) \
do { \
}
static int
-ch_do_scsi(scsi_changer *ch, unsigned char *cmd,
+ch_do_scsi(scsi_changer *ch, unsigned char *cmd, int cmd_len,
void *buffer, unsigned buflength,
enum dma_data_direction direction)
{
errno = 0;
if (debug) {
DPRINTK("command: ");
- __scsi_print_command(cmd);
+ __scsi_print_command(cmd, cmd_len);
}
result = scsi_execute_req(ch->device, cmd, direction, buffer,
DPRINTK("result: 0x%x\n",result);
if (driver_byte(result) & DRIVER_SENSE) {
if (debug)
- scsi_print_sense_hdr(ch->name, &sshdr);
+ scsi_print_sense_hdr(ch->device, ch->name, &sshdr);
errno = ch_find_errno(&sshdr);
switch(sshdr.sense_key) {
cmd[3] = elem & 0xff;
cmd[5] = 1;
cmd[9] = 255;
- if (0 == (result = ch_do_scsi(ch, cmd, buffer, 256, DMA_FROM_DEVICE))) {
+ if (0 == (result = ch_do_scsi(ch, cmd, 12,
+ buffer, 256, DMA_FROM_DEVICE))) {
if (((buffer[16] << 8) | buffer[17]) != elem) {
DPRINTK("asked for element 0x%02x, got 0x%02x\n",
elem,(buffer[16] << 8) | buffer[17]);
memset(cmd,0,sizeof(cmd));
cmd[0] = INITIALIZE_ELEMENT_STATUS;
cmd[1] = (ch->device->lun & 0x7) << 5;
- err = ch_do_scsi(ch, cmd, NULL, 0, DMA_NONE);
+ err = ch_do_scsi(ch, cmd, 6, NULL, 0, DMA_NONE);
VPRINTK(KERN_INFO, "... finished\n");
return err;
}
cmd[1] = (ch->device->lun & 0x7) << 5;
cmd[2] = 0x1d;
cmd[4] = 255;
- result = ch_do_scsi(ch, cmd, buffer, 255, DMA_FROM_DEVICE);
+ result = ch_do_scsi(ch, cmd, 10, buffer, 255, DMA_FROM_DEVICE);
if (0 != result) {
cmd[1] |= (1<<3);
- result = ch_do_scsi(ch, cmd, buffer, 255, DMA_FROM_DEVICE);
+ result = ch_do_scsi(ch, cmd, 10, buffer, 255, DMA_FROM_DEVICE);
}
if (0 == result) {
ch->firsts[CHET_MT] =
cmd[4] = (elem >> 8) & 0xff;
cmd[5] = elem & 0xff;
cmd[8] = rotate ? 1 : 0;
- return ch_do_scsi(ch, cmd, NULL, 0, DMA_NONE);
+ return ch_do_scsi(ch, cmd, 10, NULL, 0, DMA_NONE);
}
static int
cmd[6] = (dest >> 8) & 0xff;
cmd[7] = dest & 0xff;
cmd[10] = rotate ? 1 : 0;
- return ch_do_scsi(ch, cmd, NULL,0, DMA_NONE);
+ return ch_do_scsi(ch, cmd, 12, NULL,0, DMA_NONE);
}
static int
cmd[9] = dest2 & 0xff;
cmd[10] = (rotate1 ? 1 : 0) | (rotate2 ? 2 : 0);
- return ch_do_scsi(ch, cmd, NULL,0, DMA_NONE);
+ return ch_do_scsi(ch, cmd, 12, NULL, 0, DMA_NONE);
}
static void
memcpy(buffer,tag,32);
ch_check_voltag(buffer);
- result = ch_do_scsi(ch, cmd, buffer, 256, DMA_TO_DEVICE);
+ result = ch_do_scsi(ch, cmd, 12, buffer, 256, DMA_TO_DEVICE);
kfree(buffer);
return result;
}
int retval;
void __user *argp = (void __user *)arg;
+ retval = scsi_ioctl_block_when_processing_errors(ch->device, cmd,
+ file->f_flags & O_NDELAY);
+ if (retval)
+ return retval;
+
switch (cmd) {
case CHIOGPARAMS:
{
ch_cmd[5] = 1;
ch_cmd[9] = 255;
- result = ch_do_scsi(ch, ch_cmd, buffer, 256, DMA_FROM_DEVICE);
+ result = ch_do_scsi(ch, ch_cmd, 12,
+ buffer, 256, DMA_FROM_DEVICE);
if (!result) {
cge.cge_status = buffer[18];
cge.cge_flags = 0;
}
static struct scsi_driver ch_template = {
- .owner = THIS_MODULE,
.gendrv = {
.name = "ch",
+ .owner = THIS_MODULE,
.probe = ch_probe,
.remove = ch_remove,
},
/* Commands with service actions that change the command name */
-#define SERVICE_ACTION_IN_12 0xab
-#define SERVICE_ACTION_OUT_12 0xa9
-#define SERVICE_ACTION_BIDIRECTIONAL 0x9d
-#define SERVICE_ACTION_IN_16 0x9e
-#define SERVICE_ACTION_OUT_16 0x9f
#define THIRD_PARTY_COPY_OUT 0x83
#define THIRD_PARTY_COPY_IN 0x84
+#define VENDOR_SPECIFIC_CDB 0xc0
+struct sa_name_list {
+ int opcode;
+ const struct value_name_pair *arr;
+ int arr_sz;
+};
+
+struct value_name_pair {
+ int value;
+ const char * name;
+};
#ifdef CONFIG_SCSI_CONSTANTS
static const char * cdb_byte0_names[] = {
"Volume set (out), Send DVD structure",
};
-struct value_name_pair {
- int value;
- const char * name;
-};
-
static const struct value_name_pair maint_in_arr[] = {
{0x5, "Report identifying information"},
{0xa, "Report target port groups"},
};
#define VARIABLE_LENGTH_SZ ARRAY_SIZE(variable_length_arr)
-static const char * get_sa_name(const struct value_name_pair * arr,
- int arr_sz, int service_action)
-{
- int k;
+static struct sa_name_list sa_names_arr[] = {
+ {VARIABLE_LENGTH_CMD, variable_length_arr, VARIABLE_LENGTH_SZ},
+ {MAINTENANCE_IN, maint_in_arr, MAINT_IN_SZ},
+ {MAINTENANCE_OUT, maint_out_arr, MAINT_OUT_SZ},
+ {PERSISTENT_RESERVE_IN, pr_in_arr, PR_IN_SZ},
+ {PERSISTENT_RESERVE_OUT, pr_out_arr, PR_OUT_SZ},
+ {SERVICE_ACTION_IN_12, serv_in12_arr, SERV_IN12_SZ},
+ {SERVICE_ACTION_OUT_12, serv_out12_arr, SERV_OUT12_SZ},
+ {SERVICE_ACTION_BIDIRECTIONAL, serv_bidi_arr, SERV_BIDI_SZ},
+ {SERVICE_ACTION_IN_16, serv_in16_arr, SERV_IN16_SZ},
+ {SERVICE_ACTION_OUT_16, serv_out16_arr, SERV_OUT16_SZ},
+ {THIRD_PARTY_COPY_IN, tpc_in_arr, TPC_IN_SZ},
+ {THIRD_PARTY_COPY_OUT, tpc_out_arr, TPC_OUT_SZ},
+ {0, NULL, 0},
+};
- for (k = 0; k < arr_sz; ++k, ++arr) {
- if (service_action == arr->value)
- break;
- }
- return (k < arr_sz) ? arr->name : NULL;
-}
+#else /* ifndef CONFIG_SCSI_CONSTANTS */
+static const char *cdb_byte0_names[0];
+
+static struct sa_name_list sa_names_arr[] = {
+ {VARIABLE_LENGTH_CMD, NULL, 0},
+ {MAINTENANCE_IN, NULL, 0},
+ {MAINTENANCE_OUT, NULL, 0},
+ {PERSISTENT_RESERVE_IN, NULL, 0},
+ {PERSISTENT_RESERVE_OUT, NULL, 0},
+ {SERVICE_ACTION_IN_12, NULL, 0},
+ {SERVICE_ACTION_OUT_12, NULL, 0},
+ {SERVICE_ACTION_BIDIRECTIONAL, NULL, 0},
+ {SERVICE_ACTION_IN_16, NULL, 0},
+ {SERVICE_ACTION_OUT_16, NULL, 0},
+ {THIRD_PARTY_COPY_IN, NULL, 0},
+ {THIRD_PARTY_COPY_OUT, NULL, 0},
+ {0, NULL, 0},
+};
+#endif /* CONFIG_SCSI_CONSTANTS */
-/* attempt to guess cdb length if cdb_len==0 . No trailing linefeed. */
-static void print_opcode_name(unsigned char * cdbp, int cdb_len)
+static bool scsi_opcode_sa_name(int opcode, int service_action,
+ const char **cdb_name, const char **sa_name)
{
- int sa, len, cdb0;
- int fin_name = 0;
- const char * name;
+ struct sa_name_list *sa_name_ptr;
+ const struct value_name_pair *arr = NULL;
+ int arr_sz, k;
- cdb0 = cdbp[0];
- switch(cdb0) {
- case VARIABLE_LENGTH_CMD:
- len = scsi_varlen_cdb_length(cdbp);
- if (len < 10) {
- printk("short variable length command, "
- "len=%d ext_len=%d", len, cdb_len);
- break;
- }
- sa = (cdbp[8] << 8) + cdbp[9];
- name = get_sa_name(variable_length_arr, VARIABLE_LENGTH_SZ,
- sa);
- if (name)
- printk("%s", name);
- else
- printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
+ *cdb_name = NULL;
+ if (opcode >= VENDOR_SPECIFIC_CDB)
+ return false;
- if ((cdb_len > 0) && (len != cdb_len))
- printk(", in_cdb_len=%d, ext_len=%d", len, cdb_len);
+ if (opcode < ARRAY_SIZE(cdb_byte0_names))
+ *cdb_name = cdb_byte0_names[opcode];
- break;
- case MAINTENANCE_IN:
- sa = cdbp[1] & 0x1f;
- name = get_sa_name(maint_in_arr, MAINT_IN_SZ, sa);
- fin_name = 1;
- break;
- case MAINTENANCE_OUT:
- sa = cdbp[1] & 0x1f;
- name = get_sa_name(maint_out_arr, MAINT_OUT_SZ, sa);
- fin_name = 1;
- break;
- case PERSISTENT_RESERVE_IN:
- sa = cdbp[1] & 0x1f;
- name = get_sa_name(pr_in_arr, PR_IN_SZ, sa);
- fin_name = 1;
- break;
- case PERSISTENT_RESERVE_OUT:
- sa = cdbp[1] & 0x1f;
- name = get_sa_name(pr_out_arr, PR_OUT_SZ, sa);
- fin_name = 1;
- break;
- case SERVICE_ACTION_IN_12:
- sa = cdbp[1] & 0x1f;
- name = get_sa_name(serv_in12_arr, SERV_IN12_SZ, sa);
- fin_name = 1;
- break;
- case SERVICE_ACTION_OUT_12:
- sa = cdbp[1] & 0x1f;
- name = get_sa_name(serv_out12_arr, SERV_OUT12_SZ, sa);
- fin_name = 1;
- break;
- case SERVICE_ACTION_BIDIRECTIONAL:
- sa = cdbp[1] & 0x1f;
- name = get_sa_name(serv_bidi_arr, SERV_BIDI_SZ, sa);
- fin_name = 1;
- break;
- case SERVICE_ACTION_IN_16:
- sa = cdbp[1] & 0x1f;
- name = get_sa_name(serv_in16_arr, SERV_IN16_SZ, sa);
- fin_name = 1;
- break;
- case SERVICE_ACTION_OUT_16:
- sa = cdbp[1] & 0x1f;
- name = get_sa_name(serv_out16_arr, SERV_OUT16_SZ, sa);
- fin_name = 1;
- break;
- case THIRD_PARTY_COPY_IN:
- sa = cdbp[1] & 0x1f;
- name = get_sa_name(tpc_in_arr, TPC_IN_SZ, sa);
- fin_name = 1;
- break;
- case THIRD_PARTY_COPY_OUT:
- sa = cdbp[1] & 0x1f;
- name = get_sa_name(tpc_out_arr, TPC_OUT_SZ, sa);
- fin_name = 1;
- break;
- default:
- if (cdb0 < 0xc0) {
- name = cdb_byte0_names[cdb0];
- if (name)
- printk("%s", name);
- else
- printk("cdb[0]=0x%x (reserved)", cdb0);
- } else
- printk("cdb[0]=0x%x (vendor)", cdb0);
- break;
+ for (sa_name_ptr = sa_names_arr; sa_name_ptr->arr; ++sa_name_ptr) {
+ if (sa_name_ptr->opcode == opcode) {
+ arr = sa_name_ptr->arr;
+ arr_sz = sa_name_ptr->arr_sz;
+ break;
+ }
}
- if (fin_name) {
- if (name)
- printk("%s", name);
- else
- printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
+ if (!arr)
+ return false;
+
+ for (k = 0; k < arr_sz; ++k, ++arr) {
+ if (service_action == arr->value)
+ break;
}
-}
+ if (k < arr_sz)
+ *sa_name = arr->name;
-#else /* ifndef CONFIG_SCSI_CONSTANTS */
+ return true;
+}
-static void print_opcode_name(unsigned char * cdbp, int cdb_len)
+static void print_opcode_name(const unsigned char *cdbp, size_t cdb_len)
{
- int sa, len, cdb0;
+ int sa, cdb0;
+ const char *cdb_name = NULL, *sa_name = NULL;
cdb0 = cdbp[0];
- switch(cdb0) {
- case VARIABLE_LENGTH_CMD:
- len = scsi_varlen_cdb_length(cdbp);
- if (len < 10) {
- printk("short opcode=0x%x command, len=%d "
- "ext_len=%d", cdb0, len, cdb_len);
- break;
+ if (cdb0 == VARIABLE_LENGTH_CMD) {
+ if (cdb_len < 10) {
+ printk("short variable length command, len=%zu",
+ cdb_len);
+ return;
}
sa = (cdbp[8] << 8) + cdbp[9];
- printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
- if (len != cdb_len)
- printk(", in_cdb_len=%d, ext_len=%d", len, cdb_len);
- break;
- case MAINTENANCE_IN:
- case MAINTENANCE_OUT:
- case PERSISTENT_RESERVE_IN:
- case PERSISTENT_RESERVE_OUT:
- case SERVICE_ACTION_IN_12:
- case SERVICE_ACTION_OUT_12:
- case SERVICE_ACTION_BIDIRECTIONAL:
- case SERVICE_ACTION_IN_16:
- case SERVICE_ACTION_OUT_16:
- case THIRD_PARTY_COPY_IN:
- case THIRD_PARTY_COPY_OUT:
+ } else
sa = cdbp[1] & 0x1f;
- printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
- break;
- default:
- if (cdb0 < 0xc0)
+
+ if (!scsi_opcode_sa_name(cdb0, sa, &cdb_name, &sa_name)) {
+ if (cdb_name)
+ printk("%s", cdb_name);
+ else if (cdb0 >= VENDOR_SPECIFIC_CDB)
+ printk("cdb[0]=0x%x (vendor)", cdb0);
+ else if (cdb0 >= 0x60 && cdb0 < 0x7e)
+ printk("cdb[0]=0x%x (reserved)", cdb0);
+ else
printk("cdb[0]=0x%x", cdb0);
+ } else {
+ if (sa_name)
+ printk("%s", sa_name);
+ else if (cdb_name)
+ printk("%s, sa=0x%x", cdb_name, sa);
else
- printk("cdb[0]=0x%x (vendor)", cdb0);
- break;
+ printk("cdb[0]=0x%x, sa=0x%x", cdb0, sa);
}
}
-#endif
-void __scsi_print_command(unsigned char *cdb)
+void __scsi_print_command(const unsigned char *cdb, size_t cdb_len)
{
int k, len;
- print_opcode_name(cdb, 0);
+ print_opcode_name(cdb, cdb_len);
len = scsi_command_size(cdb);
+ if (cdb_len < len)
+ len = cdb_len;
/* print out all bytes in cdb */
for (k = 0; k < len; ++k)
printk(" %02x", cdb[k]);
}
EXPORT_SYMBOL(scsi_print_command);
-/**
- * scsi_print_status - print scsi status description
- * @scsi_status: scsi status value
- *
- * If the status is recognized, the description is printed.
- * Otherwise "Unknown status" is output. No trailing space.
- * If CONFIG_SCSI_CONSTANTS is not set, then print status in hex
- * (e.g. "0x2" for Check Condition).
- **/
-void
-scsi_print_status(unsigned char scsi_status) {
-#ifdef CONFIG_SCSI_CONSTANTS
- const char * ccp;
-
- switch (scsi_status) {
- case 0: ccp = "Good"; break;
- case 0x2: ccp = "Check Condition"; break;
- case 0x4: ccp = "Condition Met"; break;
- case 0x8: ccp = "Busy"; break;
- case 0x10: ccp = "Intermediate"; break;
- case 0x14: ccp = "Intermediate-Condition Met"; break;
- case 0x18: ccp = "Reservation Conflict"; break;
- case 0x22: ccp = "Command Terminated"; break; /* obsolete */
- case 0x28: ccp = "Task set Full"; break; /* was: Queue Full */
- case 0x30: ccp = "ACA Active"; break;
- case 0x40: ccp = "Task Aborted"; break;
- default: ccp = "Unknown status";
- }
- printk(KERN_INFO "%s", ccp);
-#else
- printk(KERN_INFO "0x%0x", scsi_status);
-#endif
-}
-EXPORT_SYMBOL(scsi_print_status);
-
#ifdef CONFIG_SCSI_CONSTANTS
struct error_info {
struct error_info2 {
unsigned char code1, code2_min, code2_max;
+ const char * str;
const char * fmt;
};
static const struct error_info2 additional2[] =
{
- {0x40, 0x00, 0x7f, "Ram failure (%x)"},
- {0x40, 0x80, 0xff, "Diagnostic failure on component (%x)"},
- {0x41, 0x00, 0xff, "Data path failure (%x)"},
- {0x42, 0x00, 0xff, "Power-on or self-test failure (%x)"},
- {0x4D, 0x00, 0xff, "Tagged overlapped commands (task tag %x)"},
- {0x70, 0x00, 0xff, "Decompression exception short algorithm id of %x"},
- {0, 0, 0, NULL}
+ {0x40, 0x00, 0x7f, "Ram failure", ""},
+ {0x40, 0x80, 0xff, "Diagnostic failure on component", ""},
+ {0x41, 0x00, 0xff, "Data path failure", ""},
+ {0x42, 0x00, 0xff, "Power-on or self-test failure", ""},
+ {0x4D, 0x00, 0xff, "Tagged overlapped commands", "task tag "},
+ {0x70, 0x00, 0xff, "Decompression exception", "short algorithm id of "},
+ {0, 0, 0, NULL, NULL}
};
/* description of the sense key values */
* This string may contain a "%x" and should be printed with ascq as arg.
*/
const char *
-scsi_extd_sense_format(unsigned char asc, unsigned char ascq) {
+scsi_extd_sense_format(unsigned char asc, unsigned char ascq, const char **fmt)
+{
#ifdef CONFIG_SCSI_CONSTANTS
int i;
unsigned short code = ((asc << 8) | ascq);
+ *fmt = NULL;
for (i = 0; additional[i].text; i++)
if (additional[i].code12 == code)
return additional[i].text;
for (i = 0; additional2[i].fmt; i++) {
if (additional2[i].code1 == asc &&
ascq >= additional2[i].code2_min &&
- ascq <= additional2[i].code2_max)
- return additional2[i].fmt;
+ ascq <= additional2[i].code2_max) {
+ *fmt = additional2[i].fmt;
+ return additional2[i].str;
+ }
}
+#else
+ *fmt = NULL;
#endif
return NULL;
}
EXPORT_SYMBOL(scsi_extd_sense_format);
void
-scsi_show_extd_sense(unsigned char asc, unsigned char ascq)
+scsi_show_extd_sense(const struct scsi_device *sdev, const char *name,
+ unsigned char asc, unsigned char ascq)
{
- const char *extd_sense_fmt = scsi_extd_sense_format(asc, ascq);
-
- if (extd_sense_fmt) {
- if (strstr(extd_sense_fmt, "%x")) {
- printk("Add. Sense: ");
- printk(extd_sense_fmt, ascq);
- } else
- printk("Add. Sense: %s", extd_sense_fmt);
- } else {
- if (asc >= 0x80)
- printk("<<vendor>> ASC=0x%x ASCQ=0x%x", asc,
- ascq);
- if (ascq >= 0x80)
- printk("ASC=0x%x <<vendor>> ASCQ=0x%x", asc,
- ascq);
+ const char *extd_sense_fmt = NULL;
+ const char *extd_sense_str = scsi_extd_sense_format(asc, ascq,
+ &extd_sense_fmt);
+
+ if (extd_sense_str) {
+ if (extd_sense_fmt)
+ sdev_prefix_printk(KERN_INFO, sdev, name,
+ "Add. Sense: %s (%s%x)",
+ extd_sense_str, extd_sense_fmt,
+ ascq);
else
- printk("ASC=0x%x ASCQ=0x%x", asc, ascq);
- }
+ sdev_prefix_printk(KERN_INFO, sdev, name,
+ "Add. Sense: %s", extd_sense_str);
- printk("\n");
+ } else {
+ sdev_prefix_printk(KERN_INFO, sdev, name,
+ "%sASC=0x%x %sASCQ=0x%x\n",
+ asc >= 0x80 ? "<<vendor>> " : "", asc,
+ ascq >= 0x80 ? "<<vendor>> " : "", ascq);
+ }
}
EXPORT_SYMBOL(scsi_show_extd_sense);
void
-scsi_show_sense_hdr(struct scsi_sense_hdr *sshdr)
+scsi_show_sense_hdr(const struct scsi_device *sdev, const char *name,
+ const struct scsi_sense_hdr *sshdr)
{
const char *sense_txt;
sense_txt = scsi_sense_key_string(sshdr->sense_key);
if (sense_txt)
- printk("Sense Key : %s ", sense_txt);
+ sdev_prefix_printk(KERN_INFO, sdev, name,
+ "Sense Key : %s [%s]%s\n", sense_txt,
+ scsi_sense_is_deferred(sshdr) ?
+ "deferred" : "current",
+ sshdr->response_code >= 0x72 ?
+ " [descriptor]" : "");
else
- printk("Sense Key : 0x%x ", sshdr->sense_key);
-
- printk("%s", scsi_sense_is_deferred(sshdr) ? "[deferred] " :
- "[current] ");
-
- if (sshdr->response_code >= 0x72)
- printk("[descriptor]");
-
- printk("\n");
+ sdev_prefix_printk(KERN_INFO, sdev, name,
+ "Sense Key : 0x%x [%s]%s", sshdr->sense_key,
+ scsi_sense_is_deferred(sshdr) ?
+ "deferred" : "current",
+ sshdr->response_code >= 0x72 ?
+ " [descriptor]" : "");
}
EXPORT_SYMBOL(scsi_show_sense_hdr);
* Print normalized SCSI sense header with a prefix.
*/
void
-scsi_print_sense_hdr(const char *name, struct scsi_sense_hdr *sshdr)
+scsi_print_sense_hdr(const struct scsi_device *sdev, const char *name,
+ const struct scsi_sense_hdr *sshdr)
{
- printk(KERN_INFO "%s: ", name);
- scsi_show_sense_hdr(sshdr);
- printk(KERN_INFO "%s: ", name);
- scsi_show_extd_sense(sshdr->asc, sshdr->ascq);
+ scsi_show_sense_hdr(sdev, name, sshdr);
+ scsi_show_extd_sense(sdev, name, sshdr->asc, sshdr->ascq);
}
EXPORT_SYMBOL(scsi_print_sense_hdr);
-/*
- * Print normalized SCSI sense header with device information and a prefix.
- */
-void
-scsi_cmd_print_sense_hdr(struct scsi_cmnd *scmd, const char *desc,
- struct scsi_sense_hdr *sshdr)
-{
- scmd_printk(KERN_INFO, scmd, "%s: ", desc);
- scsi_show_sense_hdr(sshdr);
- scmd_printk(KERN_INFO, scmd, "%s: ", desc);
- scsi_show_extd_sense(sshdr->asc, sshdr->ascq);
-}
-EXPORT_SYMBOL(scsi_cmd_print_sense_hdr);
-
static void
-scsi_decode_sense_buffer(const unsigned char *sense_buffer, int sense_len,
- struct scsi_sense_hdr *sshdr)
+scsi_dump_sense_buffer(const unsigned char *sense_buffer, int sense_len)
{
- int k, num, res;
-
- res = scsi_normalize_sense(sense_buffer, sense_len, sshdr);
- if (0 == res) {
- /* this may be SCSI-1 sense data */
- num = (sense_len < 32) ? sense_len : 32;
- printk("Unrecognized sense data (in hex):");
- for (k = 0; k < num; ++k) {
- if (0 == (k % 16)) {
- printk("\n");
- printk(KERN_INFO " ");
- }
- printk("%02x ", sense_buffer[k]);
+ int k, num;
+
+ num = (sense_len < 32) ? sense_len : 32;
+ printk("Unrecognized sense data (in hex):");
+ for (k = 0; k < num; ++k) {
+ if (0 == (k % 16)) {
+ printk("\n");
+ printk(KERN_INFO " ");
}
- printk("\n");
- return;
+ printk("%02x ", sense_buffer[k]);
}
-}
-
-static void
-scsi_decode_sense_extras(const unsigned char *sense_buffer, int sense_len,
- struct scsi_sense_hdr *sshdr)
-{
- int k, num, res;
-
- if (sshdr->response_code < 0x72)
- {
- /* only decode extras for "fixed" format now */
- char buff[80];
- int blen, fixed_valid;
- unsigned int info;
-
- fixed_valid = sense_buffer[0] & 0x80;
- info = ((sense_buffer[3] << 24) | (sense_buffer[4] << 16) |
- (sense_buffer[5] << 8) | sense_buffer[6]);
- res = 0;
- memset(buff, 0, sizeof(buff));
- blen = sizeof(buff) - 1;
- if (fixed_valid)
- res += snprintf(buff + res, blen - res,
- "Info fld=0x%x", info);
- if (sense_buffer[2] & 0x80) {
- /* current command has read a filemark */
- if (res > 0)
- res += snprintf(buff + res, blen - res, ", ");
- res += snprintf(buff + res, blen - res, "FMK");
- }
- if (sense_buffer[2] & 0x40) {
- /* end-of-medium condition exists */
- if (res > 0)
- res += snprintf(buff + res, blen - res, ", ");
- res += snprintf(buff + res, blen - res, "EOM");
- }
- if (sense_buffer[2] & 0x20) {
- /* incorrect block length requested */
- if (res > 0)
- res += snprintf(buff + res, blen - res, ", ");
- res += snprintf(buff + res, blen - res, "ILI");
- }
- if (res > 0)
- printk("%s\n", buff);
- } else if (sshdr->additional_length > 0) {
- /* descriptor format with sense descriptors */
- num = 8 + sshdr->additional_length;
- num = (sense_len < num) ? sense_len : num;
- printk("Descriptor sense data with sense descriptors "
- "(in hex):");
- for (k = 0; k < num; ++k) {
- if (0 == (k % 16)) {
- printk("\n");
- printk(KERN_INFO " ");
- }
- printk("%02x ", sense_buffer[k]);
- }
-
- printk("\n");
- }
-
+ printk("\n");
+ return;
}
/* Normalize and print sense buffer with name prefix */
-void __scsi_print_sense(const char *name, const unsigned char *sense_buffer,
- int sense_len)
+void __scsi_print_sense(const struct scsi_device *sdev, const char *name,
+ const unsigned char *sense_buffer, int sense_len)
{
struct scsi_sense_hdr sshdr;
- printk(KERN_INFO "%s: ", name);
- scsi_decode_sense_buffer(sense_buffer, sense_len, &sshdr);
- scsi_show_sense_hdr(&sshdr);
- scsi_decode_sense_extras(sense_buffer, sense_len, &sshdr);
- printk(KERN_INFO "%s: ", name);
- scsi_show_extd_sense(sshdr.asc, sshdr.ascq);
+ if (!scsi_normalize_sense(sense_buffer, sense_len, &sshdr)) {
+ scsi_dump_sense_buffer(sense_buffer, sense_len);
+ return;
+ }
+ scsi_show_sense_hdr(sdev, name, &sshdr);
+ scsi_show_extd_sense(sdev, name, sshdr.asc, sshdr.ascq);
}
EXPORT_SYMBOL(__scsi_print_sense);
/* Normalize and print sense buffer in SCSI command */
-void scsi_print_sense(char *name, struct scsi_cmnd *cmd)
+void scsi_print_sense(const struct scsi_cmnd *cmd)
{
- struct scsi_sense_hdr sshdr;
+ struct gendisk *disk = cmd->request->rq_disk;
+ const char *disk_name = disk ? disk->disk_name : NULL;
- scmd_printk(KERN_INFO, cmd, " ");
- scsi_decode_sense_buffer(cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE,
- &sshdr);
- scsi_show_sense_hdr(&sshdr);
- scsi_decode_sense_extras(cmd->sense_buffer, SCSI_SENSE_BUFFERSIZE,
- &sshdr);
- scmd_printk(KERN_INFO, cmd, " ");
- scsi_show_extd_sense(sshdr.asc, sshdr.ascq);
+ __scsi_print_sense(cmd->device, disk_name, cmd->sense_buffer,
+ SCSI_SENSE_BUFFERSIZE);
}
EXPORT_SYMBOL(scsi_print_sense);
"DID_PASSTHROUGH", "DID_SOFT_ERROR", "DID_IMM_RETRY", "DID_REQUEUE",
"DID_TRANSPORT_DISRUPTED", "DID_TRANSPORT_FAILFAST", "DID_TARGET_FAILURE",
"DID_NEXUS_FAILURE" };
-#define NUM_HOSTBYTE_STRS ARRAY_SIZE(hostbyte_table)
static const char * const driverbyte_table[]={
"DRIVER_OK", "DRIVER_BUSY", "DRIVER_SOFT", "DRIVER_MEDIA", "DRIVER_ERROR",
"DRIVER_INVALID", "DRIVER_TIMEOUT", "DRIVER_HARD", "DRIVER_SENSE"};
-#define NUM_DRIVERBYTE_STRS ARRAY_SIZE(driverbyte_table)
-void scsi_show_result(int result)
+#endif
+
+const char *scsi_hostbyte_string(int result)
{
+ const char *hb_string = NULL;
+#ifdef CONFIG_SCSI_CONSTANTS
int hb = host_byte(result);
- int db = driver_byte(result);
- printk("Result: hostbyte=%s driverbyte=%s\n",
- (hb < NUM_HOSTBYTE_STRS ? hostbyte_table[hb] : "invalid"),
- (db < NUM_DRIVERBYTE_STRS ? driverbyte_table[db] : "invalid"));
+ if (hb < ARRAY_SIZE(hostbyte_table))
+ hb_string = hostbyte_table[hb];
+#endif
+ return hb_string;
}
+EXPORT_SYMBOL(scsi_hostbyte_string);
-#else
-
-void scsi_show_result(int result)
+const char *scsi_driverbyte_string(int result)
{
- printk("Result: hostbyte=0x%02x driverbyte=0x%02x\n",
- host_byte(result), driver_byte(result));
+ const char *db_string = NULL;
+#ifdef CONFIG_SCSI_CONSTANTS
+ int db = driver_byte(result);
+
+ if (db < ARRAY_SIZE(driverbyte_table))
+ db_string = driverbyte_table[db];
+#endif
+ return db_string;
}
+EXPORT_SYMBOL(scsi_driverbyte_string);
+#ifdef CONFIG_SCSI_CONSTANTS
+#define scsi_mlreturn_name(result) { result, #result }
+static const struct value_name_pair scsi_mlreturn_arr[] = {
+ scsi_mlreturn_name(NEEDS_RETRY),
+ scsi_mlreturn_name(SUCCESS),
+ scsi_mlreturn_name(FAILED),
+ scsi_mlreturn_name(QUEUED),
+ scsi_mlreturn_name(SOFT_ERROR),
+ scsi_mlreturn_name(ADD_TO_MLQUEUE),
+ scsi_mlreturn_name(TIMEOUT_ERROR),
+ scsi_mlreturn_name(SCSI_RETURN_NOT_HANDLED),
+ scsi_mlreturn_name(FAST_IO_FAIL)
+};
#endif
-EXPORT_SYMBOL(scsi_show_result);
+const char *scsi_mlreturn_string(int result)
+{
+#ifdef CONFIG_SCSI_CONSTANTS
+ const struct value_name_pair *arr = scsi_mlreturn_arr;
+ int k;
-void scsi_print_result(struct scsi_cmnd *cmd)
+ for (k = 0; k < ARRAY_SIZE(scsi_mlreturn_arr); ++k, ++arr) {
+ if (result == arr->value)
+ return arr->name;
+ }
+#endif
+ return NULL;
+}
+EXPORT_SYMBOL(scsi_mlreturn_string);
+
+void scsi_print_result(struct scsi_cmnd *cmd, const char *msg, int disposition)
{
- scmd_printk(KERN_INFO, cmd, " ");
- scsi_show_result(cmd->result);
+ const char *mlret_string = scsi_mlreturn_string(disposition);
+ const char *hb_string = scsi_hostbyte_string(cmd->result);
+ const char *db_string = scsi_driverbyte_string(cmd->result);
+
+ if (hb_string || db_string)
+ scmd_printk(KERN_INFO, cmd,
+ "%s%s Result: hostbyte=%s driverbyte=%s",
+ msg ? msg : "",
+ mlret_string ? mlret_string : "UNKNOWN",
+ hb_string ? hb_string : "invalid",
+ db_string ? db_string : "invalid");
+ else
+ scmd_printk(KERN_INFO, cmd,
+ "%s%s Result: hostbyte=0x%02x driverbyte=0x%02x",
+ msg ? msg : "",
+ mlret_string ? mlret_string : "UNKNOWN",
+ host_byte(cmd->result), driver_byte(cmd->result));
}
EXPORT_SYMBOL(scsi_print_result);
return 0;
}
-static inline void
-csio_scsi_tag(struct scsi_cmnd *scmnd, uint8_t *tag, uint8_t hq,
- uint8_t oq, uint8_t sq)
-{
- char stag[2];
-
- if (scsi_populate_tag_msg(scmnd, stag)) {
- switch (stag[0]) {
- case HEAD_OF_QUEUE_TAG:
- *tag = hq;
- break;
- case ORDERED_QUEUE_TAG:
- *tag = oq;
- break;
- default:
- *tag = sq;
- break;
- }
- } else
- *tag = 0;
-}
-
/*
* csio_scsi_fcp_cmnd - Frame the SCSI FCP command paylod.
* @req: IO req structure.
int_to_scsilun(scmnd->device->lun, &fcp_cmnd->fc_lun);
fcp_cmnd->fc_tm_flags = 0;
fcp_cmnd->fc_cmdref = 0;
- fcp_cmnd->fc_pri_ta = 0;
memcpy(fcp_cmnd->fc_cdb, scmnd->cmnd, 16);
- csio_scsi_tag(scmnd, &fcp_cmnd->fc_pri_ta,
- FCP_PTA_HEADQ, FCP_PTA_ORDERED, FCP_PTA_SIMPLE);
+ if (scmnd->flags & SCMD_TAGGED)
+ fcp_cmnd->fc_pri_ta = FCP_PTA_SIMPLE;
+ else
+ fcp_cmnd->fc_pri_ta = 0;
fcp_cmnd->fc_dl = cpu_to_be32(scsi_bufflen(scmnd));
if (req->nsge)
static int
csio_slave_configure(struct scsi_device *sdev)
{
- if (sdev->tagged_supported)
- scsi_activate_tcq(sdev, csio_lun_qdepth);
- else
- scsi_deactivate_tcq(sdev, csio_lun_qdepth);
-
+ scsi_change_queue_depth(sdev, csio_lun_qdepth);
return 0;
}
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = csio_fcoe_lport_attrs,
.max_sectors = CSIO_MAX_SECTOR_SIZE,
+ .use_blk_tags = 1,
};
struct scsi_host_template csio_fcoe_shost_vport_template = {
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = csio_fcoe_vport_attrs,
.max_sectors = CSIO_MAX_SECTOR_SIZE,
+ .use_blk_tags = 1,
};
/*
.proc_name = DRV_MODULE_NAME,
.can_queue = CXGB3I_SCSI_HOST_QDEPTH,
.queuecommand = iscsi_queuecommand,
- .change_queue_depth = iscsi_change_queue_depth,
+ .change_queue_depth = scsi_change_queue_depth,
.sg_tablesize = SG_ALL,
.max_sectors = 0xFFFF,
.cmd_per_lun = ISCSI_DEF_CMD_PER_LUN,
.target_alloc = iscsi_target_alloc,
.use_clustering = DISABLE_CLUSTERING,
.this_id = -1,
+ .track_queue_depth = 1,
};
static struct iscsi_transport cxgb3i_iscsi_transport = {
.proc_name = DRV_MODULE_NAME,
.can_queue = CXGB4I_SCSI_HOST_QDEPTH,
.queuecommand = iscsi_queuecommand,
- .change_queue_depth = iscsi_change_queue_depth,
+ .change_queue_depth = scsi_change_queue_depth,
.sg_tablesize = SG_ALL,
.max_sectors = 0xFFFF,
.cmd_per_lun = ISCSI_DEF_CMD_PER_LUN,
.target_alloc = iscsi_target_alloc,
.use_clustering = DISABLE_CLUSTERING,
.this_id = -1,
+ .track_queue_depth = 1,
};
static struct iscsi_transport cxgb4i_iscsi_transport = {
if (status == CPL_ERR_RTX_NEG_ADVICE)
goto rel_skb;
+ module_put(THIS_MODULE);
+
if (status && status != CPL_ERR_TCAM_FULL &&
status != CPL_ERR_CONN_EXIST &&
status != CPL_ERR_ARP_MISS)
cxgbi_sock_get(csk);
spin_lock_bh(&csk->lock);
- if (!cxgbi_sock_flag(csk, CTPF_ABORT_REQ_RCVD)) {
- cxgbi_sock_set_flag(csk, CTPF_ABORT_REQ_RCVD);
- cxgbi_sock_set_state(csk, CTP_ABORTING);
- goto done;
+ cxgbi_sock_clear_flag(csk, CTPF_ABORT_REQ_RCVD);
+
+ if (!cxgbi_sock_flag(csk, CTPF_TX_DATA_SENT)) {
+ send_tx_flowc_wr(csk);
+ cxgbi_sock_set_flag(csk, CTPF_TX_DATA_SENT);
}
- cxgbi_sock_clear_flag(csk, CTPF_ABORT_REQ_RCVD);
+ cxgbi_sock_set_flag(csk, CTPF_ABORT_REQ_RCVD);
+ cxgbi_sock_set_state(csk, CTP_ABORTING);
+
send_abort_rpl(csk, rst_status);
if (!cxgbi_sock_flag(csk, CTPF_ABORT_RPL_PENDING)) {
csk->err = abort_status_to_errno(csk, req->status, &rst_status);
cxgbi_sock_closed(csk);
}
-done:
+
spin_unlock_bh(&csk->lock);
cxgbi_sock_put(csk);
rel_skb:
* If the source port is outside our allocation range, the caller is
* responsible for keeping track of their port usage.
*/
+
+static struct cxgbi_sock *find_sock_on_port(struct cxgbi_device *cdev,
+ unsigned char port_id)
+{
+ struct cxgbi_ports_map *pmap = &cdev->pmap;
+ unsigned int i;
+ unsigned int used;
+
+ if (!pmap->max_connect || !pmap->used)
+ return NULL;
+
+ spin_lock_bh(&pmap->lock);
+ used = pmap->used;
+ for (i = 0; used && i < pmap->max_connect; i++) {
+ struct cxgbi_sock *csk = pmap->port_csk[i];
+
+ if (csk) {
+ if (csk->port_id == port_id) {
+ spin_unlock_bh(&pmap->lock);
+ return csk;
+ }
+ used--;
+ }
+ }
+ spin_unlock_bh(&pmap->lock);
+
+ return NULL;
+}
+
static int sock_get_port(struct cxgbi_sock *csk)
{
struct cxgbi_device *cdev = csk->cdev;
csk->daddr6.sin6_addr = daddr6->sin6_addr;
csk->daddr6.sin6_port = daddr6->sin6_port;
csk->daddr6.sin6_family = daddr6->sin6_family;
+ csk->saddr6.sin6_family = daddr6->sin6_family;
csk->saddr6.sin6_addr = pref_saddr;
neigh_release(n);
read_lock_bh(&csk->callback_lock);
if (csk->user_data)
iscsi_conn_failure(csk->user_data,
- ISCSI_ERR_CONN_FAILED);
+ ISCSI_ERR_TCP_CONN_CLOSE);
read_unlock_bh(&csk->callback_lock);
}
}
{
cxgbi_sock_get(csk);
spin_lock_bh(&csk->lock);
+
+ cxgbi_sock_set_flag(csk, CTPF_ABORT_RPL_RCVD);
if (cxgbi_sock_flag(csk, CTPF_ABORT_RPL_PENDING)) {
- if (!cxgbi_sock_flag(csk, CTPF_ABORT_RPL_RCVD))
- cxgbi_sock_set_flag(csk, CTPF_ABORT_RPL_RCVD);
- else {
- cxgbi_sock_clear_flag(csk, CTPF_ABORT_RPL_RCVD);
- cxgbi_sock_clear_flag(csk, CTPF_ABORT_RPL_PENDING);
- if (cxgbi_sock_flag(csk, CTPF_ABORT_REQ_RCVD))
- pr_err("csk 0x%p,%u,0x%lx,%u,ABT_RPL_RSS.\n",
- csk, csk->state, csk->flags, csk->tid);
- cxgbi_sock_closed(csk);
- }
+ cxgbi_sock_clear_flag(csk, CTPF_ABORT_RPL_PENDING);
+ if (cxgbi_sock_flag(csk, CTPF_ABORT_REQ_RCVD))
+ pr_err("csk 0x%p,%u,0x%lx,%u,ABT_RPL_RSS.\n",
+ csk, csk->state, csk->flags, csk->tid);
+ cxgbi_sock_closed(csk);
}
+
spin_unlock_bh(&csk->lock);
cxgbi_sock_put(csk);
}
break;
case ISCSI_HOST_PARAM_IPADDRESS:
{
- __be32 addr;
-
- addr = cxgbi_get_iscsi_ipv4(chba);
- len = sprintf(buf, "%pI4", &addr);
+ struct cxgbi_sock *csk = find_sock_on_port(chba->cdev,
+ chba->port_id);
+ if (csk) {
+ len = sprintf(buf, "%pIS",
+ (struct sockaddr *)&csk->saddr);
+ }
log_debug(1 << CXGBI_DBG_ISCSI,
- "hba %s, ipv4 %pI4.\n", chba->ndev->name, &addr);
+ "hba %s, addr %s.\n", chba->ndev->name, buf);
break;
}
default:
chba->ndev->name);
}
-static inline __be32 cxgbi_get_iscsi_ipv4(struct cxgbi_hba *chba)
-{
- return chba->ipv4addr;
-}
-
struct cxgbi_device *cxgbi_device_register(unsigned int, unsigned int);
void cxgbi_device_unregister(struct cxgbi_device *);
void cxgbi_device_unregister_all(unsigned int flag);
static int scsi_dh_handler_attach(struct scsi_device *sdev,
struct scsi_device_handler *scsi_dh)
{
- int err = 0;
+ struct scsi_dh_data *d;
if (sdev->scsi_dh_data) {
if (sdev->scsi_dh_data->scsi_dh != scsi_dh)
- err = -EBUSY;
- else
- kref_get(&sdev->scsi_dh_data->kref);
- } else if (scsi_dh->attach) {
- err = scsi_dh->attach(sdev);
- if (!err) {
- kref_init(&sdev->scsi_dh_data->kref);
- sdev->scsi_dh_data->sdev = sdev;
- }
+ return -EBUSY;
+
+ kref_get(&sdev->scsi_dh_data->kref);
+ return 0;
}
- return err;
+
+ if (!try_module_get(scsi_dh->module))
+ return -EINVAL;
+
+ d = scsi_dh->attach(sdev);
+ if (IS_ERR(d)) {
+ sdev_printk(KERN_ERR, sdev, "%s: Attach failed (%ld)\n",
+ scsi_dh->name, PTR_ERR(d));
+ module_put(scsi_dh->module);
+ return PTR_ERR(d);
+ }
+
+ d->scsi_dh = scsi_dh;
+ kref_init(&d->kref);
+ d->sdev = sdev;
+
+ spin_lock_irq(sdev->request_queue->queue_lock);
+ sdev->scsi_dh_data = d;
+ spin_unlock_irq(sdev->request_queue->queue_lock);
+ return 0;
}
static void __detach_handler (struct kref *kref)
{
- struct scsi_dh_data *scsi_dh_data = container_of(kref, struct scsi_dh_data, kref);
- scsi_dh_data->scsi_dh->detach(scsi_dh_data->sdev);
+ struct scsi_dh_data *scsi_dh_data =
+ container_of(kref, struct scsi_dh_data, kref);
+ struct scsi_device_handler *scsi_dh = scsi_dh_data->scsi_dh;
+ struct scsi_device *sdev = scsi_dh_data->sdev;
+
+ spin_lock_irq(sdev->request_queue->queue_lock);
+ sdev->scsi_dh_data = NULL;
+ spin_unlock_irq(sdev->request_queue->queue_lock);
+
+ scsi_dh->detach(sdev);
+ sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n", scsi_dh->name);
+ module_put(scsi_dh->module);
}
/*
if (!scsi_dh)
scsi_dh = sdev->scsi_dh_data->scsi_dh;
- if (scsi_dh && scsi_dh->detach)
+ if (scsi_dh)
kref_put(&sdev->scsi_dh_data->kref, __detach_handler);
}
if (get_device_handler(scsi_dh->name))
return -EBUSY;
+ if (!scsi_dh->attach || !scsi_dh->detach)
+ return -EINVAL;
+
spin_lock(&list_lock);
list_add(&scsi_dh->list, &scsi_dh_list);
spin_unlock(&list_lock);
#define ALUA_OPTIMIZE_STPG 1
struct alua_dh_data {
+ struct scsi_dh_data dh_data;
int group_id;
int rel_port;
int tpgs;
static inline struct alua_dh_data *get_alua_data(struct scsi_device *sdev)
{
- struct scsi_dh_data *scsi_dh_data = sdev->scsi_dh_data;
- BUG_ON(scsi_dh_data == NULL);
- return ((struct alua_dh_data *) scsi_dh_data->buf);
+ return container_of(sdev->scsi_dh_data, struct alua_dh_data, dh_data);
}
static int realloc_buffer(struct alua_dh_data *h, unsigned len)
* LUN Not Ready -- Offline
*/
return SUCCESS;
+ if (sdev->allow_restart &&
+ sense_hdr->asc == 0x04 && sense_hdr->ascq == 0x02)
+ /*
+ * if the device is not started, we need to wake
+ * the error handler to start the motor
+ */
+ return FAILED;
break;
case UNIT_ATTENTION:
if (sense_hdr->asc == 0x29 && sense_hdr->ascq == 0x00)
return (scsi_device_tpgs(sdev) != 0);
}
-static int alua_bus_attach(struct scsi_device *sdev);
-static void alua_bus_detach(struct scsi_device *sdev);
-
-static struct scsi_device_handler alua_dh = {
- .name = ALUA_DH_NAME,
- .module = THIS_MODULE,
- .attach = alua_bus_attach,
- .detach = alua_bus_detach,
- .prep_fn = alua_prep_fn,
- .check_sense = alua_check_sense,
- .activate = alua_activate,
- .set_params = alua_set_params,
- .match = alua_match,
-};
-
/*
* alua_bus_attach - Attach device handler
* @sdev: device to be attached to
*/
-static int alua_bus_attach(struct scsi_device *sdev)
+static struct scsi_dh_data *alua_bus_attach(struct scsi_device *sdev)
{
- struct scsi_dh_data *scsi_dh_data;
struct alua_dh_data *h;
- unsigned long flags;
- int err = SCSI_DH_OK;
-
- scsi_dh_data = kzalloc(sizeof(*scsi_dh_data)
- + sizeof(*h) , GFP_KERNEL);
- if (!scsi_dh_data) {
- sdev_printk(KERN_ERR, sdev, "%s: Attach failed\n",
- ALUA_DH_NAME);
- return -ENOMEM;
- }
+ int err;
- scsi_dh_data->scsi_dh = &alua_dh;
- h = (struct alua_dh_data *) scsi_dh_data->buf;
+ h = kzalloc(sizeof(*h) , GFP_KERNEL);
+ if (!h)
+ return ERR_PTR(-ENOMEM);
h->tpgs = TPGS_MODE_UNINITIALIZED;
h->state = TPGS_STATE_OPTIMIZED;
h->group_id = -1;
h->sdev = sdev;
err = alua_initialize(sdev, h);
- if ((err != SCSI_DH_OK) && (err != SCSI_DH_DEV_OFFLINED))
+ if (err != SCSI_DH_OK && err != SCSI_DH_DEV_OFFLINED)
goto failed;
- if (!try_module_get(THIS_MODULE))
- goto failed;
-
- spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
- sdev->scsi_dh_data = scsi_dh_data;
- spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
sdev_printk(KERN_NOTICE, sdev, "%s: Attached\n", ALUA_DH_NAME);
-
- return 0;
-
+ return &h->dh_data;
failed:
- kfree(scsi_dh_data);
- sdev_printk(KERN_ERR, sdev, "%s: not attached\n", ALUA_DH_NAME);
- return -EINVAL;
+ kfree(h);
+ return ERR_PTR(-EINVAL);
}
/*
*/
static void alua_bus_detach(struct scsi_device *sdev)
{
- struct scsi_dh_data *scsi_dh_data;
- struct alua_dh_data *h;
- unsigned long flags;
-
- spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
- scsi_dh_data = sdev->scsi_dh_data;
- sdev->scsi_dh_data = NULL;
- spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+ struct alua_dh_data *h = get_alua_data(sdev);
- h = (struct alua_dh_data *) scsi_dh_data->buf;
if (h->buff && h->inq != h->buff)
kfree(h->buff);
- kfree(scsi_dh_data);
- module_put(THIS_MODULE);
- sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n", ALUA_DH_NAME);
+ kfree(h);
}
+static struct scsi_device_handler alua_dh = {
+ .name = ALUA_DH_NAME,
+ .module = THIS_MODULE,
+ .attach = alua_bus_attach,
+ .detach = alua_bus_detach,
+ .prep_fn = alua_prep_fn,
+ .check_sense = alua_check_sense,
+ .activate = alua_activate,
+ .set_params = alua_set_params,
+ .match = alua_match,
+};
+
static int __init alua_init(void)
{
int r;
};
struct clariion_dh_data {
+ struct scsi_dh_data dh_data;
/*
* Flags:
* CLARIION_SHORT_TRESPASS
static inline struct clariion_dh_data
*get_clariion_data(struct scsi_device *sdev)
{
- struct scsi_dh_data *scsi_dh_data = sdev->scsi_dh_data;
- BUG_ON(scsi_dh_data == NULL);
- return ((struct clariion_dh_data *) scsi_dh_data->buf);
+ return container_of(sdev->scsi_dh_data, struct clariion_dh_data,
+ dh_data);
}
/*
return result;
}
-static const struct scsi_dh_devlist clariion_dev_list[] = {
+static const struct {
+ char *vendor;
+ char *model;
+} clariion_dev_list[] = {
{"DGC", "RAID"},
{"DGC", "DISK"},
{"DGC", "VRAID"},
return false;
}
-static int clariion_bus_attach(struct scsi_device *sdev);
-static void clariion_bus_detach(struct scsi_device *sdev);
-
-static struct scsi_device_handler clariion_dh = {
- .name = CLARIION_NAME,
- .module = THIS_MODULE,
- .devlist = clariion_dev_list,
- .attach = clariion_bus_attach,
- .detach = clariion_bus_detach,
- .check_sense = clariion_check_sense,
- .activate = clariion_activate,
- .prep_fn = clariion_prep_fn,
- .set_params = clariion_set_params,
- .match = clariion_match,
-};
-
-static int clariion_bus_attach(struct scsi_device *sdev)
+static struct scsi_dh_data *clariion_bus_attach(struct scsi_device *sdev)
{
- struct scsi_dh_data *scsi_dh_data;
struct clariion_dh_data *h;
- unsigned long flags;
int err;
- scsi_dh_data = kzalloc(sizeof(*scsi_dh_data)
- + sizeof(*h) , GFP_KERNEL);
- if (!scsi_dh_data) {
- sdev_printk(KERN_ERR, sdev, "%s: Attach failed\n",
- CLARIION_NAME);
- return -ENOMEM;
- }
-
- scsi_dh_data->scsi_dh = &clariion_dh;
- h = (struct clariion_dh_data *) scsi_dh_data->buf;
+ h = kzalloc(sizeof(*h) , GFP_KERNEL);
+ if (!h)
+ return ERR_PTR(-ENOMEM);
h->lun_state = CLARIION_LUN_UNINITIALIZED;
h->default_sp = CLARIION_UNBOUND_LU;
h->current_sp = CLARIION_UNBOUND_LU;
if (err != SCSI_DH_OK)
goto failed;
- if (!try_module_get(THIS_MODULE))
- goto failed;
-
- spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
- sdev->scsi_dh_data = scsi_dh_data;
- spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
-
sdev_printk(KERN_INFO, sdev,
"%s: connected to SP %c Port %d (%s, default SP %c)\n",
CLARIION_NAME, h->current_sp + 'A',
h->port, lun_state[h->lun_state],
h->default_sp + 'A');
-
- return 0;
+ return &h->dh_data;
failed:
- kfree(scsi_dh_data);
- sdev_printk(KERN_ERR, sdev, "%s: not attached\n",
- CLARIION_NAME);
- return -EINVAL;
+ kfree(h);
+ return ERR_PTR(-EINVAL);
}
static void clariion_bus_detach(struct scsi_device *sdev)
{
- struct scsi_dh_data *scsi_dh_data;
- unsigned long flags;
-
- spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
- scsi_dh_data = sdev->scsi_dh_data;
- sdev->scsi_dh_data = NULL;
- spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
-
- sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n",
- CLARIION_NAME);
+ struct clariion_dh_data *h = get_clariion_data(sdev);
- kfree(scsi_dh_data);
- module_put(THIS_MODULE);
+ kfree(h);
}
+static struct scsi_device_handler clariion_dh = {
+ .name = CLARIION_NAME,
+ .module = THIS_MODULE,
+ .attach = clariion_bus_attach,
+ .detach = clariion_bus_detach,
+ .check_sense = clariion_check_sense,
+ .activate = clariion_activate,
+ .prep_fn = clariion_prep_fn,
+ .set_params = clariion_set_params,
+ .match = clariion_match,
+};
+
static int __init clariion_init(void)
{
int r;
#define HP_SW_PATH_PASSIVE 1
struct hp_sw_dh_data {
+ struct scsi_dh_data dh_data;
unsigned char sense[SCSI_SENSE_BUFFERSIZE];
int path_state;
int retries;
static inline struct hp_sw_dh_data *get_hp_sw_data(struct scsi_device *sdev)
{
- struct scsi_dh_data *scsi_dh_data = sdev->scsi_dh_data;
- BUG_ON(scsi_dh_data == NULL);
- return ((struct hp_sw_dh_data *) scsi_dh_data->buf);
+ return container_of(sdev->scsi_dh_data, struct hp_sw_dh_data, dh_data);
}
/*
return 0;
}
-static const struct scsi_dh_devlist hp_sw_dh_data_list[] = {
+static const struct {
+ char *vendor;
+ char *model;
+} hp_sw_dh_data_list[] = {
{"COMPAQ", "MSA1000 VOLUME"},
{"COMPAQ", "HSV110"},
{"HP", "HSV100"},
return false;
}
-static int hp_sw_bus_attach(struct scsi_device *sdev);
-static void hp_sw_bus_detach(struct scsi_device *sdev);
-
-static struct scsi_device_handler hp_sw_dh = {
- .name = HP_SW_NAME,
- .module = THIS_MODULE,
- .devlist = hp_sw_dh_data_list,
- .attach = hp_sw_bus_attach,
- .detach = hp_sw_bus_detach,
- .activate = hp_sw_activate,
- .prep_fn = hp_sw_prep_fn,
- .match = hp_sw_match,
-};
-
-static int hp_sw_bus_attach(struct scsi_device *sdev)
+static struct scsi_dh_data *hp_sw_bus_attach(struct scsi_device *sdev)
{
- struct scsi_dh_data *scsi_dh_data;
struct hp_sw_dh_data *h;
- unsigned long flags;
int ret;
- scsi_dh_data = kzalloc(sizeof(*scsi_dh_data)
- + sizeof(*h) , GFP_KERNEL);
- if (!scsi_dh_data) {
- sdev_printk(KERN_ERR, sdev, "%s: Attach Failed\n",
- HP_SW_NAME);
- return 0;
- }
-
- scsi_dh_data->scsi_dh = &hp_sw_dh;
- h = (struct hp_sw_dh_data *) scsi_dh_data->buf;
+ h = kzalloc(sizeof(*h), GFP_KERNEL);
+ if (!h)
+ return ERR_PTR(-ENOMEM);
h->path_state = HP_SW_PATH_UNINITIALIZED;
h->retries = HP_SW_RETRIES;
h->sdev = sdev;
if (ret != SCSI_DH_OK || h->path_state == HP_SW_PATH_UNINITIALIZED)
goto failed;
- if (!try_module_get(THIS_MODULE))
- goto failed;
-
- spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
- sdev->scsi_dh_data = scsi_dh_data;
- spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
-
sdev_printk(KERN_INFO, sdev, "%s: attached to %s path\n",
HP_SW_NAME, h->path_state == HP_SW_PATH_ACTIVE?
"active":"passive");
-
- return 0;
-
+ return &h->dh_data;
failed:
- kfree(scsi_dh_data);
- sdev_printk(KERN_ERR, sdev, "%s: not attached\n",
- HP_SW_NAME);
- return -EINVAL;
+ kfree(h);
+ return ERR_PTR(-EINVAL);
}
static void hp_sw_bus_detach( struct scsi_device *sdev )
{
- struct scsi_dh_data *scsi_dh_data;
- unsigned long flags;
-
- spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
- scsi_dh_data = sdev->scsi_dh_data;
- sdev->scsi_dh_data = NULL;
- spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
- module_put(THIS_MODULE);
-
- sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n", HP_SW_NAME);
+ struct hp_sw_dh_data *h = get_hp_sw_data(sdev);
- kfree(scsi_dh_data);
+ kfree(h);
}
+static struct scsi_device_handler hp_sw_dh = {
+ .name = HP_SW_NAME,
+ .module = THIS_MODULE,
+ .attach = hp_sw_bus_attach,
+ .detach = hp_sw_bus_detach,
+ .activate = hp_sw_activate,
+ .prep_fn = hp_sw_prep_fn,
+ .match = hp_sw_match,
+};
+
static int __init hp_sw_init(void)
{
return scsi_register_device_handler(&hp_sw_dh);
};
struct rdac_dh_data {
+ struct scsi_dh_data dh_data;
struct rdac_controller *ctlr;
#define UNINITIALIZED_LUN (1 << 8)
unsigned lun;
static inline struct rdac_dh_data *get_rdac_data(struct scsi_device *sdev)
{
- struct scsi_dh_data *scsi_dh_data = sdev->scsi_dh_data;
- BUG_ON(scsi_dh_data == NULL);
- return ((struct rdac_dh_data *) scsi_dh_data->buf);
+ return container_of(sdev->scsi_dh_data, struct rdac_dh_data, dh_data);
}
static struct request *get_rdac_req(struct scsi_device *sdev,
return SCSI_RETURN_NOT_HANDLED;
}
-static const struct scsi_dh_devlist rdac_dev_list[] = {
+static const struct {
+ char *vendor;
+ char *model;
+} rdac_dev_list[] = {
{"IBM", "1722"},
{"IBM", "1724"},
{"IBM", "1726"},
return false;
}
-static int rdac_bus_attach(struct scsi_device *sdev);
-static void rdac_bus_detach(struct scsi_device *sdev);
-
-static struct scsi_device_handler rdac_dh = {
- .name = RDAC_NAME,
- .module = THIS_MODULE,
- .devlist = rdac_dev_list,
- .prep_fn = rdac_prep_fn,
- .check_sense = rdac_check_sense,
- .attach = rdac_bus_attach,
- .detach = rdac_bus_detach,
- .activate = rdac_activate,
- .match = rdac_match,
-};
-
-static int rdac_bus_attach(struct scsi_device *sdev)
+static struct scsi_dh_data *rdac_bus_attach(struct scsi_device *sdev)
{
- struct scsi_dh_data *scsi_dh_data;
struct rdac_dh_data *h;
- unsigned long flags;
int err;
char array_name[ARRAY_LABEL_LEN];
char array_id[UNIQUE_ID_LEN];
- scsi_dh_data = kzalloc(sizeof(*scsi_dh_data)
- + sizeof(*h) , GFP_KERNEL);
- if (!scsi_dh_data) {
- sdev_printk(KERN_ERR, sdev, "%s: Attach failed\n",
- RDAC_NAME);
- return -ENOMEM;
- }
-
- scsi_dh_data->scsi_dh = &rdac_dh;
- h = (struct rdac_dh_data *) scsi_dh_data->buf;
+ h = kzalloc(sizeof(*h) , GFP_KERNEL);
+ if (!h)
+ return ERR_PTR(-ENOMEM);
h->lun = UNINITIALIZED_LUN;
h->state = RDAC_STATE_ACTIVE;
if (err != SCSI_DH_OK)
goto clean_ctlr;
- if (!try_module_get(THIS_MODULE))
- goto clean_ctlr;
-
- spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
- sdev->scsi_dh_data = scsi_dh_data;
- spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
-
sdev_printk(KERN_NOTICE, sdev,
"%s: LUN %d (%s) (%s)\n",
RDAC_NAME, h->lun, mode[(int)h->mode],
lun_state[(int)h->lun_state]);
- return 0;
+ return &h->dh_data;
clean_ctlr:
spin_lock(&list_lock);
spin_unlock(&list_lock);
failed:
- kfree(scsi_dh_data);
- sdev_printk(KERN_ERR, sdev, "%s: not attached\n",
- RDAC_NAME);
- return -EINVAL;
+ kfree(h);
+ return ERR_PTR(-EINVAL);
}
static void rdac_bus_detach( struct scsi_device *sdev )
{
- struct scsi_dh_data *scsi_dh_data;
- struct rdac_dh_data *h;
- unsigned long flags;
+ struct rdac_dh_data *h = get_rdac_data(sdev);
- scsi_dh_data = sdev->scsi_dh_data;
- h = (struct rdac_dh_data *) scsi_dh_data->buf;
if (h->ctlr && h->ctlr->ms_queued)
flush_workqueue(kmpath_rdacd);
- spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
- sdev->scsi_dh_data = NULL;
- spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
-
spin_lock(&list_lock);
if (h->ctlr)
kref_put(&h->ctlr->kref, release_controller);
spin_unlock(&list_lock);
- kfree(scsi_dh_data);
- module_put(THIS_MODULE);
- sdev_printk(KERN_NOTICE, sdev, "%s: Detached\n", RDAC_NAME);
+ kfree(h);
}
-
+static struct scsi_device_handler rdac_dh = {
+ .name = RDAC_NAME,
+ .module = THIS_MODULE,
+ .prep_fn = rdac_prep_fn,
+ .check_sense = rdac_check_sense,
+ .attach = rdac_bus_attach,
+ .detach = rdac_bus_detach,
+ .activate = rdac_activate,
+ .match = rdac_match,
+};
static int __init rdac_init(void)
{
/*
* Definitions for the generic 5380 driver.
*/
-#define AUTOSENSE
+
+#define DONT_USE_INTR
#define NCR5380_read(reg) inb(port + reg)
#define NCR5380_write(reg, value) outb(value, port + reg)
-#define NCR5380_implementation_fields unsigned int port
-#define NCR5380_local_declare() NCR5380_implementation_fields
+#define NCR5380_implementation_fields /* none */
+#define NCR5380_local_declare() unsigned int port
#define NCR5380_setup(instance) port = instance->io_port
/*
* Includes needed for NCR5380.[ch] (XXX: Move them to NCR5380.h)
*/
#include <linux/delay.h>
-#include "scsi.h"
#include "NCR5380.h"
#include "NCR5380.c"
static struct scsi_host_template dmx3191d_driver_template = {
.proc_name = DMX3191D_DRIVER_NAME,
.name = "Domex DMX3191D",
+ .info = NCR5380_info,
.queuecommand = NCR5380_queue_command,
.eh_abort_handler = NCR5380_abort,
.eh_bus_reset_handler = NCR5380_bus_reset,
if (!shost)
goto out_release_region;
shost->io_port = io;
- shost->irq = pdev->irq;
- NCR5380_init(shost, FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E);
+ /* This card does not seem to raise an interrupt on pdev->irq.
+ * Steam-powered SCSI controllers run without an IRQ anyway.
+ */
+ shost->irq = NO_IRQ;
- if (request_irq(pdev->irq, NCR5380_intr, IRQF_SHARED,
- DMX3191D_DRIVER_NAME, shost)) {
- /*
- * Steam powered scsi controllers run without an IRQ anyway
- */
- printk(KERN_WARNING "dmx3191: IRQ %d not available - "
- "switching to polled mode.\n", pdev->irq);
- shost->irq = SCSI_IRQ_NONE;
- }
+ NCR5380_init(shost, FLAG_NO_PSEUDO_DMA | FLAG_DTC3181E);
pci_set_drvdata(pdev, shost);
error = scsi_add_host(shost, &pdev->dev);
if (error)
- goto out_free_irq;
+ goto out_release_region;
scsi_scan_host(shost);
return 0;
- out_free_irq:
- free_irq(shost->irq, shost);
out_release_region:
release_region(io, DMX3191D_REGION_LEN);
out_disable_device:
NCR5380_exit(shost);
- if (shost->irq != SCSI_IRQ_NONE)
- free_irq(shost->irq, shost);
release_region(shost->io_port, DMX3191D_REGION_LEN);
pci_disable_device(pdev);
pHba = (adpt_hba *) host->hostdata[0];
if (host->can_queue && device->tagged_supported) {
- scsi_adjust_queue_depth(device, MSG_SIMPLE_TAG,
+ scsi_change_queue_depth(device,
host->can_queue - 1);
- } else {
- scsi_adjust_queue_depth(device, 0, 1);
}
return 0;
}
-#define AUTOSENSE
#define PSEUDO_DMA
#define DONT_USE_INTR
#define UNSAFE /* Leave interrupts enabled during pseudo-dma I/O */
* (Unix and Linux consulting and custom programming)
* drew@colorado.edu
* +1 (303) 440-4894
- *
- * DISTRIBUTION RELEASE 1.
- *
- * For more information, please consult
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
-*/
+ */
/*
- * Options :
- * AUTOSENSE - if defined, REQUEST SENSE will be performed automatically
- * for commands that return with a CHECK CONDITION status.
- *
- * PSEUDO_DMA - enables PSEUDO-DMA hardware, should give a 3-4X performance
- * increase compared to polled I/O.
- *
- * PARITY - enable parity checking. Not supported.
- *
- * UNSAFE - leave interrupts enabled during pseudo-DMA transfers.
- * You probably want this.
- *
* The card is detected and initialized in one of several ways :
* 1. Autoprobe (default) - since the board is memory mapped,
* a BIOS signature is scanned for to locate the registers.
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
-#include "scsi.h"
#include <scsi/scsi_host.h>
#include "dtc.h"
#define AUTOPROBE_IRQ
#include "NCR5380.h"
-
-#define DTC_PUBLIC_RELEASE 2
-
/*
* The DTC3180 & 3280 boards are memory mapped.
*
*
*/
-static void __init dtc_setup(char *str, int *ints)
+static int __init dtc_setup(char *str)
{
static int commandline_current = 0;
int i;
+ int ints[10];
+
+ get_options(str, ARRAY_SIZE(ints), ints);
if (ints[0] != 2)
printk("dtc_setup: usage dtc=address,irq\n");
else if (commandline_current < NO_OVERRIDES) {
}
++commandline_current;
}
+ return 1;
}
+
+__setup("dtc=", dtc_setup);
#endif
/*
void __iomem *base;
int sig, count;
- tpnt->proc_name = "dtc3x80";
- tpnt->show_info = dtc_show_info;
- tpnt->write_info = dtc_write_info;
-
for (count = 0; current_override < NO_OVERRIDES; ++current_override) {
addr = 0;
base = NULL;
else
instance->irq = NCR5380_probe_irq(instance, DTC_IRQS);
+ /* Compatibility with documented NCR5380 kernel parameters */
+ if (instance->irq == 255)
+ instance->irq = NO_IRQ;
+
#ifndef DONT_USE_INTR
/* With interrupts enabled, it will sometimes hang when doing heavy
* reads. So better not enable them until I finger it out. */
- if (instance->irq != SCSI_IRQ_NONE)
+ if (instance->irq != NO_IRQ)
if (request_irq(instance->irq, dtc_intr, 0,
"dtc", instance)) {
printk(KERN_ERR "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
- instance->irq = SCSI_IRQ_NONE;
+ instance->irq = NO_IRQ;
}
- if (instance->irq == SCSI_IRQ_NONE) {
+ if (instance->irq == NO_IRQ) {
printk(KERN_WARNING "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
printk(KERN_WARNING "scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
}
#else
- if (instance->irq != SCSI_IRQ_NONE)
+ if (instance->irq != NO_IRQ)
printk(KERN_WARNING "scsi%d : interrupts not used. Might as well not jumper it.\n", instance->host_no);
- instance->irq = SCSI_IRQ_NONE;
+ instance->irq = NO_IRQ;
#endif
#if defined(DTCDEBUG) && (DTCDEBUG & DTCDEBUG_INIT)
printk("scsi%d : irq = %d\n", instance->host_no, instance->irq);
#endif
- printk(KERN_INFO "scsi%d : at 0x%05X", instance->host_no, (int) instance->base);
- if (instance->irq == SCSI_IRQ_NONE)
- printk(" interrupts disabled");
- else
- printk(" irq %d", instance->irq);
- printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d", CAN_QUEUE, CMD_PER_LUN, DTC_PUBLIC_RELEASE);
- NCR5380_print_options(instance);
- printk("\n");
-
++current_override;
++count;
}
* timeout.
*/
-static int dtc_maxi = 0;
-static int dtc_wmaxi = 0;
-
static inline int NCR5380_pread(struct Scsi_Host *instance, unsigned char *dst, int len)
{
unsigned char *d = dst;
int i; /* For counting time spent in the poll-loop */
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
NCR5380_local_declare();
NCR5380_setup(instance);
i = 0;
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
NCR5380_write(MODE_REG, MR_ENABLE_EOP_INTR | MR_DMA_MODE);
- if (instance->irq == SCSI_IRQ_NONE)
+ if (instance->irq == NO_IRQ)
NCR5380_write(DTC_CONTROL_REG, CSR_DIR_READ);
else
NCR5380_write(DTC_CONTROL_REG, CSR_DIR_READ | CSR_INT_BASE);
NCR5380_write(MODE_REG, 0); /* Clear the operating mode */
rtrc(0);
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- if (i > dtc_maxi)
- dtc_maxi = i;
+ if (i > hostdata->spin_max_r)
+ hostdata->spin_max_r = i;
return (0);
}
static inline int NCR5380_pwrite(struct Scsi_Host *instance, unsigned char *src, int len)
{
int i;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
NCR5380_local_declare();
NCR5380_setup(instance);
NCR5380_read(RESET_PARITY_INTERRUPT_REG);
NCR5380_write(MODE_REG, MR_ENABLE_EOP_INTR | MR_DMA_MODE);
/* set direction (write) */
- if (instance->irq == SCSI_IRQ_NONE)
+ if (instance->irq == NO_IRQ)
NCR5380_write(DTC_CONTROL_REG, 0);
else
NCR5380_write(DTC_CONTROL_REG, CSR_5380_INTR);
/* Check for parity error here. fixme. */
NCR5380_write(MODE_REG, 0); /* Clear the operating mode */
rtrc(0);
- if (i > dtc_wmaxi)
- dtc_wmaxi = i;
+ if (i > hostdata->spin_max_w)
+ hostdata->spin_max_w = i;
return (0);
}
{
NCR5380_local_declare();
NCR5380_setup(shost);
- if (shost->irq)
+ if (shost->irq != NO_IRQ)
free_irq(shost->irq, shost);
NCR5380_exit(shost);
if (shost->io_port && shost->n_io_port)
.name = "DTC 3180/3280 ",
.detect = dtc_detect,
.release = dtc_release,
+ .proc_name = "dtc3x80",
+ .show_info = dtc_show_info,
+ .write_info = dtc_write_info,
+ .info = dtc_info,
.queuecommand = dtc_queue_command,
.eh_abort_handler = dtc_abort,
.eh_bus_reset_handler = dtc_bus_reset,
* (Unix and Linux consulting and custom programming)
* drew@colorado.edu
* +1 (303) 440-4894
- *
- * DISTRIBUTION RELEASE 2.
- *
- * For more information, please consult
- *
- *
- *
- * and
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
*/
#ifndef DTC3280_H
#define DTCDEBUG_INIT 0x1
#define DTCDEBUG_TRANSFER 0x2
-static int dtc_abort(Scsi_Cmnd *);
-static int dtc_biosparam(struct scsi_device *, struct block_device *,
- sector_t, int*);
-static int dtc_detect(struct scsi_host_template *);
-static int dtc_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
-static int dtc_bus_reset(Scsi_Cmnd *);
-
#ifndef CMD_PER_LUN
#define CMD_PER_LUN 2
#endif
#define NCR5380_queue_command dtc_queue_command
#define NCR5380_abort dtc_abort
#define NCR5380_bus_reset dtc_bus_reset
+#define NCR5380_info dtc_info
#define NCR5380_show_info dtc_show_info
#define NCR5380_write_info dtc_write_info
if (TLDEV(dev->type) && dev->tagged_supported) {
if (tag_mode == TAG_SIMPLE) {
- scsi_adjust_queue_depth(dev, MSG_SIMPLE_TAG, tqd);
tag_suffix = ", simple tags";
} else if (tag_mode == TAG_ORDERED) {
- scsi_adjust_queue_depth(dev, MSG_ORDERED_TAG, tqd);
tag_suffix = ", ordered tags";
} else {
- scsi_adjust_queue_depth(dev, 0, tqd);
tag_suffix = ", no tags";
}
+ scsi_change_queue_depth(dev, tqd);
} else if (TLDEV(dev->type) && linked_comm) {
- scsi_adjust_queue_depth(dev, 0, tqd);
+ scsi_change_queue_depth(dev, tqd);
tag_suffix = ", untagged";
} else {
- scsi_adjust_queue_depth(dev, 0, utqd);
+ scsi_change_queue_depth(dev, utqd);
tag_suffix = "";
}
struct atto_ioctl *ioctl_hba);
int esas2r_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd);
int esas2r_show_info(struct seq_file *m, struct Scsi_Host *sh);
-int esas2r_slave_alloc(struct scsi_device *dev);
-int esas2r_slave_configure(struct scsi_device *dev);
-void esas2r_slave_destroy(struct scsi_device *dev);
-int esas2r_change_queue_depth(struct scsi_device *dev, int depth, int reason);
-int esas2r_change_queue_type(struct scsi_device *dev, int type);
long esas2r_proc_ioctl(struct file *fp, unsigned int cmd, unsigned long arg);
/* SCSI error handler (eh) functions */
rq = esas2r_alloc_request(a);
if (rq == NULL) {
- up(&a->fm_api_semaphore);
fi->status = FI_STAT_BUSY;
- return;
+ goto free_sem;
}
if (fi == &a->firmware.header) {
if (a->firmware.header_buff == NULL) {
esas2r_debug("failed to allocate header buffer!");
fi->status = FI_STAT_BUSY;
- return;
+ goto free_req;
}
memcpy(a->firmware.header_buff, fi,
a->firmware.header_buff,
(dma_addr_t)a->firmware.header_buff_phys);
}
-
- up(&a->fm_api_semaphore);
+free_req:
esas2r_free_request(a, (struct esas2r_request *)rq);
+free_sem:
+ up(&a->fm_api_semaphore);
return;
}
rq = esas2r_alloc_request(a);
if (rq == NULL) {
- up(&a->nvram_semaphore);
- ioctl->data.prw.code = 0;
- break;
+ kfree(ioctl);
+ esas2r_log(ESAS2R_LOG_WARN,
+ "could not allocate an internal request");
+ return -ENOMEM;
}
code = esas2r_write_params(a, rq,
case -EINVAL:
ioctl->header.return_code = IOCTL_INVALID_PARAM;
break;
+
+ default:
+ ioctl->header.return_code = IOCTL_GENERAL_ERROR;
+ break;
}
- ioctl->header.return_code = IOCTL_GENERAL_ERROR;
}
/* Always copy the buffer back, if only to pick up the status */
.use_clustering = ENABLE_CLUSTERING,
.emulated = 0,
.proc_name = ESAS2R_DRVR_NAME,
- .slave_configure = esas2r_slave_configure,
- .slave_alloc = esas2r_slave_alloc,
- .slave_destroy = esas2r_slave_destroy,
- .change_queue_depth = esas2r_change_queue_depth,
- .change_queue_type = esas2r_change_queue_type,
+ .change_queue_depth = scsi_change_queue_depth,
+ .change_queue_type = scsi_change_queue_type,
.max_sectors = 0xFFFF,
+ .use_blk_tags = 1,
};
int sgl_page_size = 512;
cmd->scsi_done(cmd);
- return 0;
+ return SUCCESS;
}
spin_lock_irqsave(&a->queue_lock, flags);
return esas2r_dev_targ_reset(cmd, true);
}
-int esas2r_change_queue_depth(struct scsi_device *dev, int depth, int reason)
-{
- esas2r_log(ESAS2R_LOG_INFO, "change_queue_depth %p, %d", dev, depth);
-
- scsi_adjust_queue_depth(dev, scsi_get_tag_type(dev), depth);
-
- return dev->queue_depth;
-}
-
-int esas2r_change_queue_type(struct scsi_device *dev, int type)
-{
- esas2r_log(ESAS2R_LOG_INFO, "change_queue_type %p, %d", dev, type);
-
- if (dev->tagged_supported) {
- scsi_set_tag_type(dev, type);
-
- if (type)
- scsi_activate_tcq(dev, dev->queue_depth);
- else
- scsi_deactivate_tcq(dev, dev->queue_depth);
- } else {
- type = 0;
- }
-
- return type;
-}
-
-int esas2r_slave_alloc(struct scsi_device *dev)
-{
- return 0;
-}
-
-int esas2r_slave_configure(struct scsi_device *dev)
-{
- esas2r_log_dev(ESAS2R_LOG_INFO, &(dev->sdev_gendev),
- "esas2r_slave_configure()");
-
- if (dev->tagged_supported) {
- scsi_set_tag_type(dev, MSG_SIMPLE_TAG);
- scsi_activate_tcq(dev, cmd_per_lun);
- } else {
- scsi_set_tag_type(dev, 0);
- scsi_deactivate_tcq(dev, cmd_per_lun);
- }
-
- return 0;
-}
-
-void esas2r_slave_destroy(struct scsi_device *dev)
-{
- esas2r_log_dev(ESAS2R_LOG_INFO, &(dev->sdev_gendev),
- "esas2r_slave_destroy()");
-}
-
void esas2r_log_request_failure(struct esas2r_adapter *a,
struct esas2r_request *rq)
{
#define ESP_DEBUG_DATADONE 0x00000100
#define ESP_DEBUG_RECONNECT 0x00000200
#define ESP_DEBUG_AUTOSENSE 0x00000400
+#define ESP_DEBUG_EVENT 0x00000800
+#define ESP_DEBUG_COMMAND 0x00001000
#define esp_log_intr(f, a...) \
do { if (esp_debug & ESP_DEBUG_INTR) \
- printk(f, ## a); \
+ shost_printk(KERN_DEBUG, esp->host, f, ## a); \
} while (0)
#define esp_log_reset(f, a...) \
do { if (esp_debug & ESP_DEBUG_RESET) \
- printk(f, ## a); \
+ shost_printk(KERN_DEBUG, esp->host, f, ## a); \
} while (0)
#define esp_log_msgin(f, a...) \
do { if (esp_debug & ESP_DEBUG_MSGIN) \
- printk(f, ## a); \
+ shost_printk(KERN_DEBUG, esp->host, f, ## a); \
} while (0)
#define esp_log_msgout(f, a...) \
do { if (esp_debug & ESP_DEBUG_MSGOUT) \
- printk(f, ## a); \
+ shost_printk(KERN_DEBUG, esp->host, f, ## a); \
} while (0)
#define esp_log_cmddone(f, a...) \
do { if (esp_debug & ESP_DEBUG_CMDDONE) \
- printk(f, ## a); \
+ shost_printk(KERN_DEBUG, esp->host, f, ## a); \
} while (0)
#define esp_log_disconnect(f, a...) \
do { if (esp_debug & ESP_DEBUG_DISCONNECT) \
- printk(f, ## a); \
+ shost_printk(KERN_DEBUG, esp->host, f, ## a); \
} while (0)
#define esp_log_datastart(f, a...) \
do { if (esp_debug & ESP_DEBUG_DATASTART) \
- printk(f, ## a); \
+ shost_printk(KERN_DEBUG, esp->host, f, ## a); \
} while (0)
#define esp_log_datadone(f, a...) \
do { if (esp_debug & ESP_DEBUG_DATADONE) \
- printk(f, ## a); \
+ shost_printk(KERN_DEBUG, esp->host, f, ## a); \
} while (0)
#define esp_log_reconnect(f, a...) \
do { if (esp_debug & ESP_DEBUG_RECONNECT) \
- printk(f, ## a); \
+ shost_printk(KERN_DEBUG, esp->host, f, ## a); \
} while (0)
#define esp_log_autosense(f, a...) \
do { if (esp_debug & ESP_DEBUG_AUTOSENSE) \
- printk(f, ## a); \
+ shost_printk(KERN_DEBUG, esp->host, f, ## a); \
+} while (0)
+
+#define esp_log_event(f, a...) \
+do { if (esp_debug & ESP_DEBUG_EVENT) \
+ shost_printk(KERN_DEBUG, esp->host, f, ## a); \
+} while (0)
+
+#define esp_log_command(f, a...) \
+do { if (esp_debug & ESP_DEBUG_COMMAND) \
+ shost_printk(KERN_DEBUG, esp->host, f, ## a); \
} while (0)
#define esp_read8(REG) esp->ops->esp_read8(esp, REG)
esp->esp_event_cur = (idx + 1) & (ESP_EVENT_LOG_SZ - 1);
+ esp_log_command("cmd[%02x]\n", val);
esp_write8(val, ESP_CMD);
}
EXPORT_SYMBOL(scsi_esp_cmd);
+static void esp_send_dma_cmd(struct esp *esp, int len, int max_len, int cmd)
+{
+ if (esp->flags & ESP_FLAG_USE_FIFO) {
+ int i;
+
+ scsi_esp_cmd(esp, ESP_CMD_FLUSH);
+ for (i = 0; i < len; i++)
+ esp_write8(esp->command_block[i], ESP_FDATA);
+ scsi_esp_cmd(esp, cmd);
+ } else {
+ if (esp->rev == FASHME)
+ scsi_esp_cmd(esp, ESP_CMD_FLUSH);
+ cmd |= ESP_CMD_DMA;
+ esp->ops->send_dma_cmd(esp, esp->command_block_dma,
+ len, max_len, 0, cmd);
+ }
+}
+
static void esp_event(struct esp *esp, u8 val)
{
struct esp_event_ent *p;
int idx = esp->esp_event_cur;
int stop = idx;
- printk(KERN_INFO PFX "esp%d: Dumping command log\n",
- esp->host->unique_id);
+ shost_printk(KERN_INFO, esp->host, "Dumping command log\n");
do {
struct esp_event_ent *p = &esp->esp_event_log[idx];
- printk(KERN_INFO PFX "esp%d: ent[%d] %s ",
- esp->host->unique_id, idx,
- p->type == ESP_EVENT_TYPE_CMD ? "CMD" : "EVENT");
-
- printk("val[%02x] sreg[%02x] seqreg[%02x] "
- "sreg2[%02x] ireg[%02x] ss[%02x] event[%02x]\n",
- p->val, p->sreg, p->seqreg,
- p->sreg2, p->ireg, p->select_state, p->event);
+ shost_printk(KERN_INFO, esp->host,
+ "ent[%d] %s val[%02x] sreg[%02x] seqreg[%02x] "
+ "sreg2[%02x] ireg[%02x] ss[%02x] event[%02x]\n",
+ idx,
+ p->type == ESP_EVENT_TYPE_CMD ? "CMD" : "EVENT",
+ p->val, p->sreg, p->seqreg,
+ p->sreg2, p->ireg, p->select_state, p->event);
idx = (idx + 1) & (ESP_EVENT_LOG_SZ - 1);
} while (idx != stop);
while (esp_read8(ESP_FFLAGS) & ESP_FF_FBYTES) {
if (--lim == 0) {
- printk(KERN_ALERT PFX "esp%d: ESP_FF_BYTES "
- "will not clear!\n",
- esp->host->unique_id);
+ shost_printk(KERN_ALERT, esp->host,
+ "ESP_FF_BYTES will not clear!\n");
break;
}
udelay(1);
} else {
esp->min_period = ((5 * esp->ccycle) / 1000);
}
+ if (esp->rev == FAS236) {
+ /*
+ * The AM53c974 chip returns the same ID as FAS236;
+ * try to configure glitch eater.
+ */
+ u8 config4 = ESP_CONFIG4_GE1;
+ esp_write8(config4, ESP_CFG4);
+ config4 = esp_read8(ESP_CFG4);
+ if (config4 & ESP_CONFIG4_GE1) {
+ esp->rev = PCSCSI;
+ esp_write8(esp->config4, ESP_CFG4);
+ }
+ }
esp->max_period = (esp->max_period + 3)>>2;
esp->min_period = (esp->min_period + 3)>>2;
/* fallthrough... */
case FAS236:
- /* Fast 236 or HME */
+ case PCSCSI:
+ /* Fast 236, AM53c974 or HME */
esp_write8(esp->config2, ESP_CFG2);
if (esp->rev == FASHME) {
u8 cfg3 = esp->target[0].esp_config3;
p->cur_residue -= len;
p->tot_residue -= len;
if (p->cur_residue < 0 || p->tot_residue < 0) {
- printk(KERN_ERR PFX "esp%d: Data transfer overflow.\n",
- esp->host->unique_id);
- printk(KERN_ERR PFX "esp%d: cur_residue[%d] tot_residue[%d] "
- "len[%u]\n",
- esp->host->unique_id,
- p->cur_residue, p->tot_residue, len);
+ shost_printk(KERN_ERR, esp->host,
+ "Data transfer overflow.\n");
+ shost_printk(KERN_ERR, esp->host,
+ "cur_residue[%d] tot_residue[%d] len[%u]\n",
+ p->cur_residue, p->tot_residue, len);
p->cur_residue = 0;
p->tot_residue = 0;
}
if (!ent->sense_ptr) {
- esp_log_autosense("esp%d: Doing auto-sense for "
- "tgt[%d] lun[%d]\n",
- esp->host->unique_id, tgt, lun);
+ esp_log_autosense("Doing auto-sense for tgt[%d] lun[%d]\n",
+ tgt, lun);
ent->sense_ptr = cmd->sense_buffer;
ent->sense_dma = esp->ops->map_single(esp,
val = (p - esp->command_block);
- if (esp->rev == FASHME)
- scsi_esp_cmd(esp, ESP_CMD_FLUSH);
- esp->ops->send_dma_cmd(esp, esp->command_block_dma,
- val, 16, 0, ESP_CMD_DMA | ESP_CMD_SELA);
+ esp_send_dma_cmd(esp, val, 16, ESP_CMD_SELA);
}
static struct esp_cmd_entry *find_and_prep_issuable_command(struct esp *esp)
return ent;
}
- if (!scsi_populate_tag_msg(cmd, &ent->tag[0])) {
+ if (!spi_populate_tag_msg(&ent->tag[0], cmd)) {
ent->tag[0] = 0;
ent->tag[1] = 0;
}
}
if (!(esp->flags & ESP_FLAG_DOING_SLOWCMD)) {
- start_cmd = ESP_CMD_DMA | ESP_CMD_SELA;
+ start_cmd = ESP_CMD_SELA;
if (ent->tag[0]) {
*p++ = ent->tag[0];
*p++ = ent->tag[1];
- start_cmd = ESP_CMD_DMA | ESP_CMD_SA3;
+ start_cmd = ESP_CMD_SA3;
}
for (i = 0; i < cmd->cmd_len; i++)
esp->msg_out_len += 2;
}
- start_cmd = ESP_CMD_DMA | ESP_CMD_SELAS;
+ start_cmd = ESP_CMD_SELAS;
esp->select_state = ESP_SELECT_MSGOUT;
}
val = tgt;
printk("]\n");
}
- if (esp->rev == FASHME)
- scsi_esp_cmd(esp, ESP_CMD_FLUSH);
- esp->ops->send_dma_cmd(esp, esp->command_block_dma,
- val, 16, 0, start_cmd);
+ esp_send_dma_cmd(esp, val, 16, start_cmd);
}
static struct esp_cmd_entry *esp_get_ent(struct esp *esp)
* - DMA programmed with wrong direction
* - improper phase change
*/
- printk(KERN_ERR PFX "esp%d: Gross error sreg[%02x]\n",
- esp->host->unique_id, esp->sreg);
+ shost_printk(KERN_ERR, esp->host,
+ "Gross error sreg[%02x]\n", esp->sreg);
/* XXX Reset the chip. XXX */
return 1;
}
default:
if (!(esp->sreg & ESP_STAT_INTR)) {
- esp->ireg = esp_read8(ESP_INTRPT);
if (esp->ireg & ESP_INTR_SR)
return 1;
* ESP is not, the only possibility is a DMA error.
*/
if (!esp->ops->dma_error(esp)) {
- printk(KERN_ERR PFX "esp%d: Spurious irq, "
- "sreg=%02x.\n",
- esp->host->unique_id, esp->sreg);
+ shost_printk(KERN_ERR, esp->host,
+ "Spurious irq, sreg=%02x.\n",
+ esp->sreg);
return -1;
}
- printk(KERN_ERR PFX "esp%d: DMA error\n",
- esp->host->unique_id);
+ shost_printk(KERN_ERR, esp->host, "DMA error\n");
/* XXX Reset the chip. XXX */
return -1;
static void esp_schedule_reset(struct esp *esp)
{
- esp_log_reset("ESP: esp_schedule_reset() from %pf\n",
+ esp_log_reset("esp_schedule_reset() from %pf\n",
__builtin_return_address(0));
esp->flags |= ESP_FLAG_RESETTING;
esp_event(esp, ESP_EVENT_RESET);
int i;
if (!lp->num_tagged) {
- printk(KERN_ERR PFX "esp%d: Reconnect w/num_tagged==0\n",
- esp->host->unique_id);
+ shost_printk(KERN_ERR, esp->host,
+ "Reconnect w/num_tagged==0\n");
return NULL;
}
- esp_log_reconnect("ESP: reconnect tag, ");
+ esp_log_reconnect("reconnect tag, ");
for (i = 0; i < ESP_QUICKIRQ_LIMIT; i++) {
if (esp->ops->irq_pending(esp))
break;
}
if (i == ESP_QUICKIRQ_LIMIT) {
- printk(KERN_ERR PFX "esp%d: Reconnect IRQ1 timeout\n",
- esp->host->unique_id);
+ shost_printk(KERN_ERR, esp->host,
+ "Reconnect IRQ1 timeout\n");
return NULL;
}
i, esp->ireg, esp->sreg);
if (esp->ireg & ESP_INTR_DC) {
- printk(KERN_ERR PFX "esp%d: Reconnect, got disconnect.\n",
- esp->host->unique_id);
+ shost_printk(KERN_ERR, esp->host,
+ "Reconnect, got disconnect.\n");
return NULL;
}
if ((esp->sreg & ESP_STAT_PMASK) != ESP_MIP) {
- printk(KERN_ERR PFX "esp%d: Reconnect, not MIP sreg[%02x].\n",
- esp->host->unique_id, esp->sreg);
+ shost_printk(KERN_ERR, esp->host,
+ "Reconnect, not MIP sreg[%02x].\n", esp->sreg);
return NULL;
}
udelay(1);
}
if (i == ESP_RESELECT_TAG_LIMIT) {
- printk(KERN_ERR PFX "esp%d: Reconnect IRQ2 timeout\n",
- esp->host->unique_id);
+ shost_printk(KERN_ERR, esp->host, "Reconnect IRQ2 timeout\n");
return NULL;
}
esp->ops->dma_drain(esp);
if (esp->command_block[0] < SIMPLE_QUEUE_TAG ||
esp->command_block[0] > ORDERED_QUEUE_TAG) {
- printk(KERN_ERR PFX "esp%d: Reconnect, bad tag "
- "type %02x.\n",
- esp->host->unique_id, esp->command_block[0]);
+ shost_printk(KERN_ERR, esp->host,
+ "Reconnect, bad tag type %02x.\n",
+ esp->command_block[0]);
return NULL;
}
ent = lp->tagged_cmds[esp->command_block[1]];
if (!ent) {
- printk(KERN_ERR PFX "esp%d: Reconnect, no entry for "
- "tag %02x.\n",
- esp->host->unique_id, esp->command_block[1]);
+ shost_printk(KERN_ERR, esp->host,
+ "Reconnect, no entry for tag %02x.\n",
+ esp->command_block[1]);
return NULL;
}
tp = &esp->target[target];
dev = __scsi_device_lookup_by_target(tp->starget, lun);
if (!dev) {
- printk(KERN_ERR PFX "esp%d: Reconnect, no lp "
- "tgt[%u] lun[%u]\n",
- esp->host->unique_id, target, lun);
+ shost_printk(KERN_ERR, esp->host,
+ "Reconnect, no lp tgt[%u] lun[%u]\n",
+ target, lun);
goto do_reset;
}
lp = dev->hostdata;
return 0;
}
- printk("ESP: Unexpected selection completion ireg[%x].\n",
- esp->ireg);
+ shost_printk(KERN_INFO, esp->host,
+ "Unexpected selection completion ireg[%x]\n", esp->ireg);
esp_schedule_reset(esp);
return 0;
}
(((unsigned int)esp_read8(ESP_TCMED)) << 8));
if (esp->rev == FASHME)
ecount |= ((unsigned int)esp_read8(FAS_RLO)) << 16;
+ if (esp->rev == PCSCSI && (esp->config2 & ESP_CONFIG2_FENAB))
+ ecount |= ((unsigned int)esp_read8(ESP_TCHI)) << 16;
}
bytes_sent = esp->data_dma_len;
bytes_sent -= ecount;
+ /*
+ * The am53c974 has a DMA 'pecularity'. The doc states:
+ * In some odd byte conditions, one residual byte will
+ * be left in the SCSI FIFO, and the FIFO Flags will
+ * never count to '0 '. When this happens, the residual
+ * byte should be retrieved via PIO following completion
+ * of the BLAST operation.
+ */
+ if (fifo_cnt == 1 && ent->flags & ESP_CMD_FLAG_RESIDUAL) {
+ size_t count = 1;
+ size_t offset = bytes_sent;
+ u8 bval = esp_read8(ESP_FDATA);
+
+ if (ent->flags & ESP_CMD_FLAG_AUTOSENSE)
+ ent->sense_ptr[bytes_sent] = bval;
+ else {
+ struct esp_cmd_priv *p = ESP_CMD_PRIV(cmd);
+ u8 *ptr;
+
+ ptr = scsi_kmap_atomic_sg(p->cur_sg, p->u.num_sg,
+ &offset, &count);
+ if (likely(ptr)) {
+ *(ptr + offset) = bval;
+ scsi_kunmap_atomic_sg(ptr);
+ }
+ }
+ bytes_sent += fifo_cnt;
+ ent->flags &= ~ESP_CMD_FLAG_RESIDUAL;
+ }
if (!(ent->flags & ESP_CMD_FLAG_WRITE))
bytes_sent -= fifo_cnt;
return;
}
- printk("ESP: Unexpected extended msg type %x\n",
- esp->msg_in[2]);
+ shost_printk(KERN_INFO, esp->host,
+ "Unexpected extended msg type %x\n", esp->msg_in[2]);
esp->msg_out[0] = ABORT_TASK_SET;
esp->msg_out_len = 1;
if (msg0 & 0x80) {
/* Identify */
- printk("ESP: Unexpected msgin identify\n");
+ shost_printk(KERN_INFO, esp->host,
+ "Unexpected msgin identify\n");
return 0;
}
static int esp_process_event(struct esp *esp)
{
- int write;
+ int write, i;
again:
write = 0;
+ esp_log_event("process event %d phase %x\n",
+ esp->event, esp->sreg & ESP_STAT_PMASK);
switch (esp->event) {
case ESP_EVENT_CHECK_PHASE:
switch (esp->sreg & ESP_STAT_PMASK) {
break;
default:
- printk("ESP: Unexpected phase, sreg=%02x\n",
- esp->sreg);
+ shost_printk(KERN_INFO, esp->host,
+ "Unexpected phase, sreg=%02x\n",
+ esp->sreg);
esp_schedule_reset(esp);
return 0;
}
esp->data_dma_len = dma_len;
if (!dma_len) {
- printk(KERN_ERR PFX "esp%d: DMA length is zero!\n",
- esp->host->unique_id);
- printk(KERN_ERR PFX "esp%d: cur adr[%08llx] len[%08x]\n",
- esp->host->unique_id,
- (unsigned long long)esp_cur_dma_addr(ent, cmd),
- esp_cur_dma_len(ent, cmd));
+ shost_printk(KERN_ERR, esp->host,
+ "DMA length is zero!\n");
+ shost_printk(KERN_ERR, esp->host,
+ "cur adr[%08llx] len[%08x]\n",
+ (unsigned long long)esp_cur_dma_addr(ent, cmd),
+ esp_cur_dma_len(ent, cmd));
esp_schedule_reset(esp);
return 0;
}
- esp_log_datastart("ESP: start data addr[%08llx] len[%u] "
- "write(%d)\n",
+ esp_log_datastart("start data addr[%08llx] len[%u] write(%d)\n",
(unsigned long long)dma_addr, dma_len, write);
esp->ops->send_dma_cmd(esp, dma_addr, dma_len, dma_len,
int bytes_sent;
if (esp->ops->dma_error(esp)) {
- printk("ESP: data done, DMA error, resetting\n");
+ shost_printk(KERN_INFO, esp->host,
+ "data done, DMA error, resetting\n");
esp_schedule_reset(esp);
return 0;
}
/* We should always see exactly a bus-service
* interrupt at the end of a successful transfer.
*/
- printk("ESP: data done, not BSERV, resetting\n");
+ shost_printk(KERN_INFO, esp->host,
+ "data done, not BSERV, resetting\n");
esp_schedule_reset(esp);
return 0;
}
bytes_sent = esp_data_bytes_sent(esp, ent, cmd);
- esp_log_datadone("ESP: data done flgs[%x] sent[%d]\n",
+ esp_log_datadone("data done flgs[%x] sent[%d]\n",
ent->flags, bytes_sent);
if (bytes_sent < 0) {
}
if (ent->message != COMMAND_COMPLETE) {
- printk("ESP: Unexpected message %x in status\n",
- ent->message);
+ shost_printk(KERN_INFO, esp->host,
+ "Unexpected message %x in status\n",
+ ent->message);
esp_schedule_reset(esp);
return 0;
}
scsi_esp_cmd(esp, ESP_CMD_ESEL);
if (ent->message == COMMAND_COMPLETE) {
- esp_log_cmddone("ESP: Command done status[%x] "
- "message[%x]\n",
+ esp_log_cmddone("Command done status[%x] message[%x]\n",
ent->status, ent->message);
if (ent->status == SAM_STAT_TASK_SET_FULL)
esp_event_queue_full(esp, ent);
DID_OK));
}
} else if (ent->message == DISCONNECT) {
- esp_log_disconnect("ESP: Disconnecting tgt[%d] "
- "tag[%x:%x]\n",
+ esp_log_disconnect("Disconnecting tgt[%d] tag[%x:%x]\n",
cmd->device->id,
ent->tag[0], ent->tag[1]);
esp->active_cmd = NULL;
esp_maybe_execute_command(esp);
} else {
- printk("ESP: Unexpected message %x in freebus\n",
- ent->message);
+ shost_printk(KERN_INFO, esp->host,
+ "Unexpected message %x in freebus\n",
+ ent->message);
esp_schedule_reset(esp);
return 0;
}
if (esp->msg_out_len == 1) {
esp_write8(esp->msg_out[0], ESP_FDATA);
scsi_esp_cmd(esp, ESP_CMD_TI);
+ } else if (esp->flags & ESP_FLAG_USE_FIFO) {
+ for (i = 0; i < esp->msg_out_len; i++)
+ esp_write8(esp->msg_out[i], ESP_FDATA);
+ scsi_esp_cmd(esp, ESP_CMD_TI);
} else {
/* Use DMA. */
memcpy(esp->command_block,
val = esp_read8(ESP_FDATA);
esp->msg_in[esp->msg_in_len++] = val;
- esp_log_msgin("ESP: Got msgin byte %x\n", val);
+ esp_log_msgin("Got msgin byte %x\n", val);
if (!esp_msgin_process(esp))
esp->msg_in_len = 0;
if (esp->event != ESP_EVENT_FREE_BUS)
esp_event(esp, ESP_EVENT_CHECK_PHASE);
} else {
- printk("ESP: MSGIN neither BSERV not FDON, resetting");
+ shost_printk(KERN_INFO, esp->host,
+ "MSGIN neither BSERV not FDON, resetting");
esp_schedule_reset(esp);
return 0;
}
case ESP_EVENT_CMD_START:
memcpy(esp->command_block, esp->cmd_bytes_ptr,
esp->cmd_bytes_left);
- if (esp->rev == FASHME)
- scsi_esp_cmd(esp, ESP_CMD_FLUSH);
- esp->ops->send_dma_cmd(esp, esp->command_block_dma,
- esp->cmd_bytes_left, 16, 0,
- ESP_CMD_DMA | ESP_CMD_TI);
+ esp_send_dma_cmd(esp, esp->cmd_bytes_left, 16, ESP_CMD_TI);
esp_event(esp, ESP_EVENT_CMD_DONE);
esp->flags |= ESP_FLAG_QUICKIRQ_CHECK;
break;
break;
default:
- printk("ESP: Unexpected event %x, resetting\n",
- esp->event);
+ shost_printk(KERN_INFO, esp->host,
+ "Unexpected event %x, resetting\n", esp->event);
esp_schedule_reset(esp);
return 0;
break;
int finish_reset, intr_done;
u8 phase;
+ /*
+ * Once INTRPT is read STATUS and SSTEP are cleared.
+ */
esp->sreg = esp_read8(ESP_STATUS);
+ esp->seqreg = esp_read8(ESP_SSTEP);
+ esp->ireg = esp_read8(ESP_INTRPT);
if (esp->flags & ESP_FLAG_RESETTING) {
finish_reset = 1;
return;
}
- esp->ireg = esp_read8(ESP_INTRPT);
-
if (esp->ireg & ESP_INTR_SR)
finish_reset = 1;
}
}
- esp_log_intr("ESP: intr sreg[%02x] seqreg[%02x] "
+ esp_log_intr("intr sreg[%02x] seqreg[%02x] "
"sreg2[%02x] ireg[%02x]\n",
esp->sreg, esp->seqreg, esp->sreg2, esp->ireg);
intr_done = 0;
if (esp->ireg & (ESP_INTR_S | ESP_INTR_SATN | ESP_INTR_IC)) {
- printk("ESP: unexpected IREG %02x\n", esp->ireg);
+ shost_printk(KERN_INFO, esp->host,
+ "unexpected IREG %02x\n", esp->ireg);
if (esp->ireg & ESP_INTR_IC)
esp_dump_cmd_log(esp);
u8 val;
esp->config1 = (ESP_CONFIG1_PENABLE | (esp->scsi_id & 7));
- esp->config2 = (ESP_CONFIG2_SCSI2ENAB | ESP_CONFIG2_REGPARITY);
+ if (esp->config2 == 0) {
+ esp->config2 = (ESP_CONFIG2_SCSI2ENAB | ESP_CONFIG2_REGPARITY);
+ esp_write8(esp->config2, ESP_CFG2);
+
+ val = esp_read8(ESP_CFG2);
+ val &= ~ESP_CONFIG2_MAGIC;
+
+ esp->config2 = 0;
+ if (val != (ESP_CONFIG2_SCSI2ENAB | ESP_CONFIG2_REGPARITY)) {
+ /*
+ * If what we write to cfg2 does not come back,
+ * cfg2 is not implemented.
+ * Therefore this must be a plain esp100.
+ */
+ esp->rev = ESP100;
+ return;
+ }
+ }
+
+ esp_set_all_config3(esp, 5);
+ esp->prev_cfg3 = 5;
esp_write8(esp->config2, ESP_CFG2);
+ esp_write8(0, ESP_CFG3);
+ esp_write8(esp->prev_cfg3, ESP_CFG3);
- val = esp_read8(ESP_CFG2);
- val &= ~ESP_CONFIG2_MAGIC;
- if (val != (ESP_CONFIG2_SCSI2ENAB | ESP_CONFIG2_REGPARITY)) {
- /* If what we write to cfg2 does not come back, cfg2 is not
- * implemented, therefore this must be a plain esp100.
+ val = esp_read8(ESP_CFG3);
+ if (val != 5) {
+ /* The cfg2 register is implemented, however
+ * cfg3 is not, must be esp100a.
*/
- esp->rev = ESP100;
+ esp->rev = ESP100A;
} else {
- esp->config2 = 0;
- esp_set_all_config3(esp, 5);
- esp->prev_cfg3 = 5;
- esp_write8(esp->config2, ESP_CFG2);
- esp_write8(0, ESP_CFG3);
+ esp_set_all_config3(esp, 0);
+ esp->prev_cfg3 = 0;
esp_write8(esp->prev_cfg3, ESP_CFG3);
- val = esp_read8(ESP_CFG3);
- if (val != 5) {
- /* The cfg2 register is implemented, however
- * cfg3 is not, must be esp100a.
- */
- esp->rev = ESP100A;
+ /* All of cfg{1,2,3} implemented, must be one of
+ * the fas variants, figure out which one.
+ */
+ if (esp->cfact == 0 || esp->cfact > ESP_CCF_F5) {
+ esp->rev = FAST;
+ esp->sync_defp = SYNC_DEFP_FAST;
} else {
- esp_set_all_config3(esp, 0);
- esp->prev_cfg3 = 0;
- esp_write8(esp->prev_cfg3, ESP_CFG3);
-
- /* All of cfg{1,2,3} implemented, must be one of
- * the fas variants, figure out which one.
- */
- if (esp->cfact == 0 || esp->cfact > ESP_CCF_F5) {
- esp->rev = FAST;
- esp->sync_defp = SYNC_DEFP_FAST;
- } else {
- esp->rev = ESP236;
- }
- esp->config2 = 0;
- esp_write8(esp->config2, ESP_CFG2);
+ esp->rev = ESP236;
}
}
}
"FAS100A",
"FAST",
"FASHME",
+ "AM53C974",
};
static struct scsi_transport_template *esp_transport_template;
static int instance;
int err;
+ if (!esp->num_tags)
+ esp->num_tags = ESP_DEFAULT_TAGS;
+ else if (esp->num_tags >= ESP_MAX_TAG)
+ esp->num_tags = ESP_MAX_TAG - 1;
esp->host->transportt = esp_transport_template;
esp->host->max_lun = ESP_MAX_LUN;
esp->host->cmd_per_lun = 2;
esp_bootup_reset(esp);
- printk(KERN_INFO PFX "esp%u, regs[%1p:%1p] irq[%u]\n",
- esp->host->unique_id, esp->regs, esp->dma_regs,
- esp->host->irq);
- printk(KERN_INFO PFX "esp%u is a %s, %u MHz (ccf=%u), SCSI ID %u\n",
- esp->host->unique_id, esp_chip_names[esp->rev],
- esp->cfreq / 1000000, esp->cfact, esp->scsi_id);
+ dev_printk(KERN_INFO, dev, "esp%u: regs[%1p:%1p] irq[%u]\n",
+ esp->host->unique_id, esp->regs, esp->dma_regs,
+ esp->host->irq);
+ dev_printk(KERN_INFO, dev,
+ "esp%u: is a %s, %u MHz (ccf=%u), SCSI ID %u\n",
+ esp->host->unique_id, esp_chip_names[esp->rev],
+ esp->cfreq / 1000000, esp->cfact, esp->scsi_id);
/* Let the SCSI bus reset settle. */
ssleep(esp_bus_reset_settle);
{
struct esp *esp = shost_priv(dev->host);
struct esp_target_data *tp = &esp->target[dev->id];
- int goal_tags, queue_depth;
-
- goal_tags = 0;
- if (dev->tagged_supported) {
- /* XXX make this configurable somehow XXX */
- goal_tags = ESP_DEFAULT_TAGS;
-
- if (goal_tags > ESP_MAX_TAG)
- goal_tags = ESP_MAX_TAG;
- }
+ if (dev->tagged_supported)
+ scsi_change_queue_depth(dev, esp->num_tags);
- queue_depth = goal_tags;
- if (queue_depth < dev->host->cmd_per_lun)
- queue_depth = dev->host->cmd_per_lun;
-
- if (goal_tags) {
- scsi_set_tag_type(dev, MSG_ORDERED_TAG);
- scsi_activate_tcq(dev, queue_depth);
- } else {
- scsi_deactivate_tcq(dev, queue_depth);
- }
tp->flags |= ESP_TGT_DISCONNECT;
if (!spi_initial_dv(dev->sdev_target))
* XXX much for the final driver.
*/
spin_lock_irqsave(esp->host->host_lock, flags);
- printk(KERN_ERR PFX "esp%d: Aborting command [%p:%02x]\n",
- esp->host->unique_id, cmd, cmd->cmnd[0]);
+ shost_printk(KERN_ERR, esp->host, "Aborting command [%p:%02x]\n",
+ cmd, cmd->cmnd[0]);
ent = esp->active_cmd;
if (ent)
- printk(KERN_ERR PFX "esp%d: Current command [%p:%02x]\n",
- esp->host->unique_id, ent->cmd, ent->cmd->cmnd[0]);
+ shost_printk(KERN_ERR, esp->host,
+ "Current command [%p:%02x]\n",
+ ent->cmd, ent->cmd->cmnd[0]);
list_for_each_entry(ent, &esp->queued_cmds, list) {
- printk(KERN_ERR PFX "esp%d: Queued command [%p:%02x]\n",
- esp->host->unique_id, ent->cmd, ent->cmd->cmnd[0]);
+ shost_printk(KERN_ERR, esp->host, "Queued command [%p:%02x]\n",
+ ent->cmd, ent->cmd->cmnd[0]);
}
list_for_each_entry(ent, &esp->active_cmds, list) {
- printk(KERN_ERR PFX "esp%d: Active command [%p:%02x]\n",
- esp->host->unique_id, ent->cmd, ent->cmd->cmnd[0]);
+ shost_printk(KERN_ERR, esp->host, " Active command [%p:%02x]\n",
+ ent->cmd, ent->cmd->cmnd[0]);
}
esp_dump_cmd_log(esp);
spin_unlock_irqrestore(esp->host->host_lock, flags);
.use_clustering = ENABLE_CLUSTERING,
.max_sectors = 0xffff,
.skip_settle_delay = 1,
+ .use_blk_tags = 1,
};
EXPORT_SYMBOL(scsi_esp_template);
-/* esp_scsi.h: Defines and structures for the ESP drier.
+/* esp_scsi.h: Defines and structures for the ESP driver.
*
* Copyright (C) 2007 David S. Miller (davem@davemloft.net)
*/
#define ESP_CTEST 0x0aUL /* wo Chip test register 0x28 */
#define ESP_CFG2 0x0bUL /* rw Second cfg register 0x2c */
#define ESP_CFG3 0x0cUL /* rw Third cfg register 0x30 */
+#define ESP_CFG4 0x0dUL /* rw Fourth cfg register 0x34 */
#define ESP_TCHI 0x0eUL /* rw High bits transf count 0x38 */
#define ESP_UID ESP_TCHI /* ro Unique ID code 0x38 */
#define FAS_RLO ESP_TCHI /* rw HME extended counter 0x38 */
#define ESP_CONFIG3_IMS 0x80 /* ID msg chk'ng (esp/fas236) */
#define ESP_CONFIG3_OBPUSH 0x80 /* Push odd-byte to dma (hme) */
+/* ESP config register 4 read-write, found only on am53c974 chips */
+#define ESP_CONFIG4_RADE 0x04 /* Active negation */
+#define ESP_CONFIG4_RAE 0x08 /* Active negation on REQ and ACK */
+#define ESP_CONFIG4_PWD 0x20 /* Reduced power feature */
+#define ESP_CONFIG4_GE0 0x40 /* Glitch eater bit 0 */
+#define ESP_CONFIG4_GE1 0x80 /* Glitch eater bit 1 */
+
+#define ESP_CONFIG_GE_12NS (0)
+#define ESP_CONFIG_GE_25NS (ESP_CONFIG_GE1)
+#define ESP_CONFIG_GE_35NS (ESP_CONFIG_GE0)
+#define ESP_CONFIG_GE_0NS (ESP_CONFIG_GE0 | ESP_CONFIG_GE1)
+
/* ESP command register read-write */
/* Group 1 commands: These may be sent at any point in time to the ESP
* chip. None of them can generate interrupts 'cept
FAS100A = 0x04,
FAST = 0x05,
FASHME = 0x06,
+ PCSCSI = 0x07, /* AM53c974 */
};
struct esp_cmd_entry {
#define ESP_CMD_FLAG_WRITE 0x01 /* DMA is a write */
#define ESP_CMD_FLAG_ABORT 0x02 /* being aborted */
#define ESP_CMD_FLAG_AUTOSENSE 0x04 /* Doing automatic REQUEST_SENSE */
+#define ESP_CMD_FLAG_RESIDUAL 0x08 /* AM53c974 BLAST residual */
u8 tag[2];
u8 orig_tag[2];
struct completion *eh_done;
};
-/* XXX make this configurable somehow XXX */
#define ESP_DEFAULT_TAGS 16
#define ESP_MAX_TARGET 16
u8 prev_soff;
u8 prev_stp;
u8 prev_cfg3;
- u8 __pad;
+ u8 num_tags;
struct list_head esp_cmd_pool;
u8 bursts;
u8 config1;
u8 config2;
+ u8 config4;
u8 scsi_id;
u32 scsi_id_mask;
#define ESP_FLAG_WIDE_CAPABLE 0x00000008
#define ESP_FLAG_QUICKIRQ_CHECK 0x00000010
#define ESP_FLAG_DISABLE_SYNC 0x00000020
+#define ESP_FLAG_USE_FIFO 0x00000040
u8 select_state;
#define ESP_SELECT_NONE 0x00 /* Not selecting */
.eh_device_reset_handler = fc_eh_device_reset,
.eh_host_reset_handler = fc_eh_host_reset,
.slave_alloc = fc_slave_alloc,
- .change_queue_depth = fc_change_queue_depth,
- .change_queue_type = fc_change_queue_type,
+ .change_queue_depth = scsi_change_queue_depth,
+ .change_queue_type = scsi_change_queue_type,
.this_id = -1,
.cmd_per_lun = 3,
.can_queue = FCOE_MAX_OUTSTANDING_COMMANDS,
.use_clustering = ENABLE_CLUSTERING,
.sg_tablesize = SG_ALL,
.max_sectors = 0xffff,
+ .use_blk_tags = 1,
+ .track_queue_depth = 1,
};
/**
#define DRV_NAME "fnic"
#define DRV_DESCRIPTION "Cisco FCoE HBA Driver"
-#define DRV_VERSION "1.6.0.11"
+#define DRV_VERSION "1.6.0.16"
#define PFX DRV_NAME ": "
#define DFX DRV_NAME "%d: "
fnic->lport->host->host_no, FNIC_FC_LE,
"Link Status: UP_DOWN",
strlen("Link Status: UP_DOWN"));
+ if (fnic->config.flags & VFCF_FIP_CAPABLE) {
+ FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
+ "deleting fip-timer during link-down\n");
+ del_timer_sync(&fnic->fip_timer);
+ }
fcoe_ctlr_link_down(&fnic->ctlr);
}
{
struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
- sdev->tagged_supported = 1;
-
if (!rport || fc_remote_port_chkready(rport))
return -ENXIO;
- scsi_activate_tcq(sdev, fnic_max_qdepth);
+ scsi_change_queue_depth(sdev, fnic_max_qdepth);
return 0;
}
.eh_device_reset_handler = fnic_device_reset,
.eh_host_reset_handler = fnic_host_reset,
.slave_alloc = fnic_slave_alloc,
- .change_queue_depth = fc_change_queue_depth,
- .change_queue_type = fc_change_queue_type,
+ .change_queue_depth = scsi_change_queue_depth,
+ .change_queue_type = scsi_change_queue_type,
.this_id = -1,
.cmd_per_lun = 3,
.can_queue = FNIC_DFLT_IO_REQ,
.sg_tablesize = FNIC_MAX_SG_DESC_CNT,
.max_sectors = 0xffff,
.shost_attrs = fnic_attrs,
+ .use_blk_tags = 1,
+ .track_queue_depth = 1,
};
static void
unsigned long time;
int done;
int err;
+ int count;
+
+ count = 0;
err = start(vdev, arg);
if (err)
return err;
- /* Wait for func to complete...2 seconds max */
+ /* Wait for func to complete.
+ * Sometime schedule_timeout_uninterruptible take long time
+ * to wake up so we do not retry as we are only waiting for
+ * 2 seconds in while loop. By adding count, we make sure
+ * we try atleast three times before returning -ETIMEDOUT
+ */
time = jiffies + (HZ * 2);
do {
err = finished(vdev, &done);
+ count++;
if (err)
return err;
if (done)
return 0;
schedule_timeout_uninterruptible(HZ / 10);
- } while (time_after(time, jiffies));
+ } while (time_after(time, jiffies) || (count < 3));
return -ETIMEDOUT;
}
struct fc_rport_libfc_priv *rp = rport->dd_data;
struct host_sg_desc *desc;
struct misc_stats *misc_stats = &fnic->fnic_stats.misc_stats;
- u8 pri_tag = 0;
unsigned int i;
unsigned long intr_flags;
int flags;
u8 exch_flags;
struct scsi_lun fc_lun;
- char msg[2];
if (sg_count) {
/* For each SGE, create a device desc entry */
int_to_scsilun(sc->device->lun, &fc_lun);
- pri_tag = FCPIO_ICMND_PTA_SIMPLE;
- msg[0] = MSG_SIMPLE_TAG;
- scsi_populate_tag_msg(sc, msg);
- if (msg[0] == MSG_ORDERED_TAG)
- pri_tag = FCPIO_ICMND_PTA_ORDERED;
-
/* Enqueue the descriptor in the Copy WQ */
spin_lock_irqsave(&fnic->wq_copy_lock[0], intr_flags);
io_req->sgl_list_pa,
io_req->sense_buf_pa,
0, /* scsi cmd ref, always 0 */
- pri_tag, /* scsi pri and tag */
+ FCPIO_ICMND_PTA_SIMPLE,
+ /* scsi pri and tag */
flags, /* command flags */
sc->cmnd, sc->cmd_len,
scsi_bufflen(sc),
int ret;
u64 cmd_trace;
int sg_count = 0;
- unsigned long flags;
+ unsigned long flags = 0;
unsigned long ptr;
+ struct fc_rport_priv *rdata;
+ spinlock_t *io_lock = NULL;
if (unlikely(fnic_chk_state_flags_locked(fnic, FNIC_FLAGS_IO_BLOCKED)))
return SCSI_MLQUEUE_HOST_BUSY;
return 0;
}
+ rdata = lp->tt.rport_lookup(lp, rport->port_id);
+ if (!rdata || (rdata->rp_state == RPORT_ST_DELETE)) {
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "returning IO as rport is removed\n");
+ atomic64_inc(&fnic_stats->misc_stats.rport_not_ready);
+ sc->result = DID_NO_CONNECT;
+ done(sc);
+ return 0;
+ }
+
if (lp->state != LPORT_ST_READY || !(lp->link_up))
return SCSI_MLQUEUE_HOST_BUSY;
}
}
+ /*
+ * Will acquire lock defore setting to IO initialized.
+ */
+
+ io_lock = fnic_io_lock_hash(fnic, sc);
+ spin_lock_irqsave(io_lock, flags);
+
/* initialize rest of io_req */
io_req->port_id = rport->port_id;
io_req->start_time = jiffies;
* In case another thread cancelled the request,
* refetch the pointer under the lock.
*/
- spinlock_t *io_lock = fnic_io_lock_hash(fnic, sc);
FNIC_TRACE(fnic_queuecommand, sc->device->host->host_no,
sc->request->tag, sc, 0, 0, 0,
(((u64)CMD_FLAGS(sc) << 32) | CMD_STATE(sc)));
- spin_lock_irqsave(io_lock, flags);
io_req = (struct fnic_io_req *)CMD_SP(sc);
CMD_SP(sc) = NULL;
CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE;
fnic_release_ioreq_buf(fnic, io_req, sc);
mempool_free(io_req, fnic->io_req_pool);
}
+ atomic_dec(&fnic->in_flight);
+ /* acquire host lock before returning to SCSI */
+ spin_lock(lp->host->host_lock);
+ return ret;
} else {
atomic64_inc(&fnic_stats->io_stats.active_ios);
atomic64_inc(&fnic_stats->io_stats.num_ios);
sc->request->tag, sc, io_req,
sg_count, cmd_trace,
(((u64)CMD_FLAGS(sc) >> 32) | CMD_STATE(sc)));
+
+ /* if only we issued IO, will we have the io lock */
+ if (CMD_FLAGS(sc) & FNIC_IO_INITIALIZED)
+ spin_unlock_irqrestore(io_lock, flags);
+
atomic_dec(&fnic->in_flight);
/* acquire host lock before returning to SCSI */
spin_lock(lp->host->host_lock);
if (frame_type == FNIC_FC_RECV) {
eth_fcoe_hdr_len = sizeof(struct ethhdr) +
sizeof(struct fcoe_hdr);
- fc_trc_frame_len = fc_trc_frame_len + eth_fcoe_hdr_len;
memset((char *)fc_trace, 0xff, eth_fcoe_hdr_len);
/* Copy the rest of data frame */
memcpy((char *)(fc_trace + eth_fcoe_hdr_len), (void *)frame,
min_t(u8, fc_trc_frame_len,
- (u8)(FC_TRC_SIZE_BYTES - FC_TRC_HEADER_SIZE)));
+ (u8)(FC_TRC_SIZE_BYTES - FC_TRC_HEADER_SIZE
+ - eth_fcoe_hdr_len)));
} else {
memcpy((char *)fc_trace, (void *)frame,
min_t(u8, fc_trc_frame_len,
*
* Added ISAPNP support for DTC436 adapters,
* Thomas Sailer, sailer@ife.ee.ethz.ch
- *
- * ALPHA RELEASE 1.
- *
- * For more information, please consult
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
*/
/*
*/
/*
- * Options :
- *
- * PARITY - enable parity checking. Not supported.
- *
- * SCSI2 - enable support for SCSI-II tagged queueing. Untested.
- *
- * USLEEP - enable support for devices that don't disconnect. Untested.
- *
* The card is detected and initialized in one of several ways :
* 1. With command line overrides - NCR5380=port,irq may be
* used on the LILO command line to override the defaults.
*/
/* settings for DTC3181E card with only Mustek scanner attached */
-#define USLEEP
#define USLEEP_POLL 1
#define USLEEP_SLEEP 20
#define USLEEP_WAITLONG 500
#define AUTOPROBE_IRQ
-#define AUTOSENSE
-
#ifdef CONFIG_SCSI_GENERIC_NCR53C400
#define NCR53C400_PSEUDO_DMA 1
#define PSEUDO_DMA
#define NCR53C400
-#define NCR5380_STATS
-#undef NCR5380_STAT_LIMIT
#endif
#include <asm/io.h>
#include <linux/signal.h>
#include <linux/blkdev.h>
-#include "scsi.h"
#include <scsi/scsi_host.h>
#include "g_NCR5380.h"
#include "NCR5380.h"
* Locks: none
*/
-int __init generic_NCR5380_detect(struct scsi_host_template * tpnt)
+static int __init generic_NCR5380_detect(struct scsi_host_template *tpnt)
{
static int current_override = 0;
int count;
if (pnp_irq_valid(dev, 0))
overrides[count].irq = pnp_irq(dev, 0);
else
- overrides[count].irq = SCSI_IRQ_NONE;
+ overrides[count].irq = NO_IRQ;
if (pnp_dma_valid(dev, 0))
overrides[count].dma = pnp_dma(dev, 0);
else
else
instance->irq = NCR5380_probe_irq(instance, 0xffff);
- if (instance->irq != SCSI_IRQ_NONE)
+ /* Compatibility with documented NCR5380 kernel parameters */
+ if (instance->irq == 255)
+ instance->irq = NO_IRQ;
+
+ if (instance->irq != NO_IRQ)
if (request_irq(instance->irq, generic_NCR5380_intr,
0, "NCR5380", instance)) {
printk(KERN_WARNING "scsi%d : IRQ%d not free, interrupts disabled\n", instance->host_no, instance->irq);
- instance->irq = SCSI_IRQ_NONE;
+ instance->irq = NO_IRQ;
}
- if (instance->irq == SCSI_IRQ_NONE) {
+ if (instance->irq == NO_IRQ) {
printk(KERN_INFO "scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
printk(KERN_INFO "scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
}
- printk(KERN_INFO "scsi%d : at " STRVAL(NCR5380_map_name) " 0x%x", instance->host_no, (unsigned int) instance->NCR5380_instance_name);
- if (instance->irq == SCSI_IRQ_NONE)
- printk(" interrupts disabled");
- else
- printk(" irq %d", instance->irq);
- printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d", CAN_QUEUE, CMD_PER_LUN, GENERIC_NCR5380_PUBLIC_RELEASE);
- NCR5380_print_options(instance);
- printk("\n");
-
++current_override;
++count;
}
return count;
}
-/**
- * generic_NCR5380_info - reporting string
- * @host: NCR5380 to report on
- *
- * Report driver information for the NCR5380
- */
-
-const char *generic_NCR5380_info(struct Scsi_Host *host)
-{
- static const char string[] = "Generic NCR5380/53C400 Driver";
- return string;
-}
-
/**
* generic_NCR5380_release_resources - free resources
* @instance: host adapter to clean up
* Locks: none
*/
-int generic_NCR5380_release_resources(struct Scsi_Host *instance)
+static int generic_NCR5380_release_resources(struct Scsi_Host *instance)
{
NCR5380_local_declare();
NCR5380_setup(instance);
- if (instance->irq != SCSI_IRQ_NONE)
+ if (instance->irq != NO_IRQ)
free_irq(instance->irq, instance);
NCR5380_exit(instance);
#include "NCR5380.c"
-#define PRINTP(x) seq_printf(m, x)
-#define ANDP ,
-
-static void sprint_opcode(struct seq_file *m, int opcode)
-{
- PRINTP("0x%02x " ANDP opcode);
-}
-
-static void sprint_command(struct seq_file *m, unsigned char *command)
-{
- int i, s;
- sprint_opcode(m, command[0]);
- for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i)
- PRINTP("%02x " ANDP command[i]);
- PRINTP("\n");
-}
-
-/**
- * sprintf_Scsi_Cmnd - print a scsi command
- * @m: seq_fil to print into
- * @cmd: SCSI command block
- *
- * Print out the target and command data in hex
- */
-
-static void sprint_Scsi_Cmnd(struct seq_file *m, Scsi_Cmnd * cmd)
-{
- PRINTP("host number %d destination target %d, lun %llu\n" ANDP cmd->device->host->host_no ANDP cmd->device->id ANDP cmd->device->lun);
- PRINTP(" command = ");
- sprint_command(m, cmd->cmnd);
-}
-
-/**
- * generic_NCR5380_proc_info - /proc for NCR5380 driver
- * @buffer: buffer to print into
- * @start: start position
- * @offset: offset into buffer
- * @len: length
- * @hostno: instance to affect
- * @inout: read/write
- *
- * Provide the procfs information for the 5380 controller. We fill
- * this with useful debugging information including the commands
- * being executed, disconnected command queue and the statistical
- * data
- *
- * Locks: global cli/lock for queue walk
- */
-
-static int generic_NCR5380_show_info(struct seq_file *m, struct Scsi_Host *scsi_ptr)
-{
- NCR5380_local_declare();
- unsigned long flags;
- unsigned char status;
- int i;
- Scsi_Cmnd *ptr;
- struct NCR5380_hostdata *hostdata;
-#ifdef NCR5380_STATS
- struct scsi_device *dev;
-#endif
-
- NCR5380_setup(scsi_ptr);
- hostdata = (struct NCR5380_hostdata *) scsi_ptr->hostdata;
-
- spin_lock_irqsave(scsi_ptr->host_lock, flags);
- PRINTP("SCSI host number %d : %s\n" ANDP scsi_ptr->host_no ANDP scsi_ptr->hostt->name);
- PRINTP("Generic NCR5380 driver version %d\n" ANDP GENERIC_NCR5380_PUBLIC_RELEASE);
- PRINTP("NCR5380 core version %d\n" ANDP NCR5380_PUBLIC_RELEASE);
-#ifdef NCR53C400
- PRINTP("NCR53C400 extension version %d\n" ANDP NCR53C400_PUBLIC_RELEASE);
- PRINTP("NCR53C400 card%s detected\n" ANDP(((struct NCR5380_hostdata *) scsi_ptr->hostdata)->flags & FLAG_NCR53C400) ? "" : " not");
-# if NCR53C400_PSEUDO_DMA
- PRINTP("NCR53C400 pseudo DMA used\n");
-# endif
-#else
- PRINTP("NO NCR53C400 driver extensions\n");
-#endif
- PRINTP("Using %s mapping at %s 0x%lx, " ANDP STRVAL(NCR5380_map_config) ANDP STRVAL(NCR5380_map_name) ANDP scsi_ptr->NCR5380_instance_name);
- if (scsi_ptr->irq == SCSI_IRQ_NONE)
- PRINTP("no interrupt\n");
- else
- PRINTP("on interrupt %d\n" ANDP scsi_ptr->irq);
-
-#ifdef NCR5380_STATS
- if (hostdata->connected || hostdata->issue_queue || hostdata->disconnected_queue)
- PRINTP("There are commands pending, transfer rates may be crud\n");
- if (hostdata->pendingr)
- PRINTP(" %d pending reads" ANDP hostdata->pendingr);
- if (hostdata->pendingw)
- PRINTP(" %d pending writes" ANDP hostdata->pendingw);
- if (hostdata->pendingr || hostdata->pendingw)
- PRINTP("\n");
- shost_for_each_device(dev, scsi_ptr) {
- unsigned long br = hostdata->bytes_read[dev->id];
- unsigned long bw = hostdata->bytes_write[dev->id];
- long tr = hostdata->time_read[dev->id] / HZ;
- long tw = hostdata->time_write[dev->id] / HZ;
-
- PRINTP(" T:%d %s " ANDP dev->id ANDP scsi_device_type(dev->type));
- for (i = 0; i < 8; i++)
- if (dev->vendor[i] >= 0x20)
- seq_putc(m, dev->vendor[i]);
- seq_putc(m, ' ');
- for (i = 0; i < 16; i++)
- if (dev->model[i] >= 0x20)
- seq_putc(m, dev->model[i]);
- seq_putc(m, ' ');
- for (i = 0; i < 4; i++)
- if (dev->rev[i] >= 0x20)
- seq_putc(m, dev->rev[i]);
- seq_putc(m, ' ');
-
- PRINTP("\n%10ld kb read in %5ld secs" ANDP br / 1024 ANDP tr);
- if (tr)
- PRINTP(" @ %5ld bps" ANDP br / tr);
-
- PRINTP("\n%10ld kb written in %5ld secs" ANDP bw / 1024 ANDP tw);
- if (tw)
- PRINTP(" @ %5ld bps" ANDP bw / tw);
- PRINTP("\n");
- }
-#endif
-
- status = NCR5380_read(STATUS_REG);
- if (!(status & SR_REQ))
- PRINTP("REQ not asserted, phase unknown.\n");
- else {
- for (i = 0; (phases[i].value != PHASE_UNKNOWN) && (phases[i].value != (status & PHASE_MASK)); ++i);
- PRINTP("Phase %s\n" ANDP phases[i].name);
- }
-
- if (!hostdata->connected) {
- PRINTP("No currently connected command\n");
- } else {
- sprint_Scsi_Cmnd(m, (Scsi_Cmnd *) hostdata->connected);
- }
-
- PRINTP("issue_queue\n");
-
- for (ptr = (Scsi_Cmnd *) hostdata->issue_queue; ptr; ptr = (Scsi_Cmnd *) ptr->host_scribble)
- sprint_Scsi_Cmnd(m, ptr);
-
- PRINTP("disconnected_queue\n");
-
- for (ptr = (Scsi_Cmnd *) hostdata->disconnected_queue; ptr; ptr = (Scsi_Cmnd *) ptr->host_scribble)
- sprint_Scsi_Cmnd(m, ptr);
-
- spin_unlock_irqrestore(scsi_ptr->host_lock, flags);
- return 0;
-}
-
-#undef PRINTP
-#undef ANDP
-
static struct scsi_host_template driver_template = {
.show_info = generic_NCR5380_show_info,
- .name = "Generic NCR5380/NCR53C400 Scsi Driver",
+ .name = "Generic NCR5380/NCR53C400 SCSI",
.detect = generic_NCR5380_detect,
.release = generic_NCR5380_release_resources,
.info = generic_NCR5380_info,
*
* NCR53C400 extensions (c) 1994,1995,1996, Kevin Lentin
* K.Lentin@cs.monash.edu.au
- *
- * ALPHA RELEASE 1.
- *
- * For more information, please consult
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
*/
#ifndef GENERIC_NCR5380_H
#define GENERIC_NCR5380_H
-
-#define GENERIC_NCR5380_PUBLIC_RELEASE 1
-
#ifdef NCR53C400
#define BIOSPARAM
#define NCR5380_BIOSPARAM generic_NCR5380_biosparam
#endif
#ifndef ASM
-static int generic_NCR5380_abort(Scsi_Cmnd *);
-static int generic_NCR5380_detect(struct scsi_host_template *);
-static int generic_NCR5380_release_resources(struct Scsi_Host *);
-static int generic_NCR5380_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
-static int generic_NCR5380_bus_reset(Scsi_Cmnd *);
-static const char* generic_NCR5380_info(struct Scsi_Host *);
#ifndef CMD_PER_LUN
#define CMD_PER_LUN 2
#define NCR5380_bus_reset generic_NCR5380_bus_reset
#define NCR5380_pread generic_NCR5380_pread
#define NCR5380_pwrite generic_NCR5380_pwrite
-#define NCR5380_proc_info notyet_generic_proc_info
+#define NCR5380_info generic_NCR5380_info
+#define NCR5380_show_info generic_NCR5380_show_info
#define BOARD_NCR5380 0
#define BOARD_NCR53C400 1
case VERIFY:
case START_STOP:
case MODE_SENSE:
- case SERVICE_ACTION_IN:
+ case SERVICE_ACTION_IN_16:
TRACE(("cache cmd %x/%x/%x/%x/%x/%x\n",nscp->cmnd[0],
nscp->cmnd[1],nscp->cmnd[2],nscp->cmnd[3],
nscp->cmnd[4],nscp->cmnd[5]));
gdth_copy_internal_data(ha, scp, (char*)&rdc, sizeof(gdth_rdcap_data));
break;
- case SERVICE_ACTION_IN:
+ case SERVICE_ACTION_IN_16:
if ((scp->cmnd[1] & 0x1f) == SAI_READ_CAPACITY_16 &&
(ha->cache_feat & GDT_64BIT)) {
gdth_rdcap16_data rdc16;
/* configure lun */
static int gdth_slave_configure(struct scsi_device *sdev)
{
- scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
sdev->skip_ms_page_3f = 1;
sdev->skip_ms_page_8 = 1;
return 0;
shost->cmd_per_lun = sht->cmd_per_lun;
shost->unchecked_isa_dma = sht->unchecked_isa_dma;
shost->use_clustering = sht->use_clustering;
- shost->ordered_tag = sht->ordered_tag;
shost->no_write_same = sht->no_write_same;
if (shost_eh_deadline == -1 || !sht->eh_host_reset_handler)
WQ_UNBOUND | WQ_MEM_RECLAIM,
1, shost->host_no);
if (!shost->tmf_work_q) {
- printk(KERN_WARNING "scsi%d: failed to create tmf workq\n",
- shost->host_no);
+ shost_printk(KERN_WARNING, shost,
+ "failed to create tmf workq\n");
goto fail_kthread;
}
scsi_proc_hostdir_add(shost->hostt);
#include <linux/bitmap.h>
#include <linux/atomic.h>
#include <linux/jiffies.h>
+#include <linux/percpu-defs.h>
#include <linux/percpu.h>
#include <asm/div64.h>
#include "hpsa_cmd.h"
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1922},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1923},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1924},
- {PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1925},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1926},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1928},
{PCI_VENDOR_ID_HP, PCI_DEVICE_ID_HP_CISSH, 0x103C, 0x1929},
{0x3249103C, "Smart Array P812", &SA5_access},
{0x324A103C, "Smart Array P712m", &SA5_access},
{0x324B103C, "Smart Array P711m", &SA5_access},
+ {0x3233103C, "HP StorageWorks 1210m", &SA5_access}, /* alias of 333f */
{0x3350103C, "Smart Array P222", &SA5_access},
{0x3351103C, "Smart Array P420", &SA5_access},
{0x3352103C, "Smart Array P421", &SA5_access},
static irqreturn_t do_hpsa_intr_intx(int irq, void *dev_id);
static irqreturn_t do_hpsa_intr_msi(int irq, void *dev_id);
-static int hpsa_ioctl(struct scsi_device *dev, int cmd, void *arg);
+static int hpsa_ioctl(struct scsi_device *dev, int cmd, void __user *arg);
static void lock_and_start_io(struct ctlr_info *h);
static void start_io(struct ctlr_info *h, unsigned long *flags);
#ifdef CONFIG_COMPAT
-static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd, void *arg);
+static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd,
+ void __user *arg);
#endif
static void cmd_free(struct ctlr_info *h, struct CommandList *c);
static void hpsa_scan_start(struct Scsi_Host *);
static int hpsa_scan_finished(struct Scsi_Host *sh,
unsigned long elapsed_time);
-static int hpsa_change_queue_depth(struct scsi_device *sdev,
- int qdepth, int reason);
static int hpsa_eh_device_reset_handler(struct scsi_cmnd *scsicmd);
static int hpsa_eh_abort_handler(struct scsi_cmnd *scsicmd);
"detected, command retried\n", h->ctlr);
break;
case LUN_FAILED:
- dev_warn(&h->pdev->dev, HPSA "%d: LUN failure "
- "detected, action required\n", h->ctlr);
+ dev_warn(&h->pdev->dev,
+ HPSA "%d: LUN failure detected\n", h->ctlr);
break;
case REPORT_LUNS_CHANGED:
- dev_warn(&h->pdev->dev, HPSA "%d: report LUN data "
- "changed, action required\n", h->ctlr);
+ dev_warn(&h->pdev->dev,
+ HPSA "%d: report LUN data changed\n", h->ctlr);
/*
* Note: this REPORT_LUNS_CHANGED condition only occurs on the external
* target (array) devices.
struct Scsi_Host *shost = class_to_shost(dev);
struct ctlr_info *h = shost_to_hba(shost);
- return snprintf(buf, 20, "%d\n", h->commands_outstanding);
+ return snprintf(buf, 20, "%d\n",
+ atomic_read(&h->commands_outstanding));
}
static ssize_t host_show_transport_mode(struct device *dev,
.queuecommand = hpsa_scsi_queue_command,
.scan_start = hpsa_scan_start,
.scan_finished = hpsa_scan_finished,
- .change_queue_depth = hpsa_change_queue_depth,
+ .change_queue_depth = scsi_change_queue_depth,
.this_id = -1,
.use_clustering = ENABLE_CLUSTERING,
.eh_abort_handler = hpsa_eh_abort_handler,
{
u32 a;
struct reply_queue_buffer *rq = &h->reply_queue[q];
- unsigned long flags;
if (h->transMethod & CFGTBL_Trans_io_accel1)
return h->access.command_completed(h, q);
if ((rq->head[rq->current_entry] & 1) == rq->wraparound) {
a = rq->head[rq->current_entry];
rq->current_entry++;
- spin_lock_irqsave(&h->lock, flags);
- h->commands_outstanding--;
- spin_unlock_irqrestore(&h->lock, flags);
+ atomic_dec(&h->commands_outstanding);
} else {
a = FIFO_EMPTY;
}
{
struct SGDescriptor *chain_sg, *chain_block;
u64 temp64;
+ u32 chain_len;
chain_sg = &c->SG[h->max_cmd_sg_entries - 1];
chain_block = h->cmd_sg_list[c->cmdindex];
- chain_sg->Ext = HPSA_SG_CHAIN;
- chain_sg->Len = sizeof(*chain_sg) *
+ chain_sg->Ext = cpu_to_le32(HPSA_SG_CHAIN);
+ chain_len = sizeof(*chain_sg) *
(c->Header.SGTotal - h->max_cmd_sg_entries);
- temp64 = pci_map_single(h->pdev, chain_block, chain_sg->Len,
+ chain_sg->Len = cpu_to_le32(chain_len);
+ temp64 = pci_map_single(h->pdev, chain_block, chain_len,
PCI_DMA_TODEVICE);
if (dma_mapping_error(&h->pdev->dev, temp64)) {
/* prevent subsequent unmapping */
- chain_sg->Addr.lower = 0;
- chain_sg->Addr.upper = 0;
+ chain_sg->Addr = cpu_to_le64(0);
return -1;
}
- chain_sg->Addr.lower = (u32) (temp64 & 0x0FFFFFFFFULL);
- chain_sg->Addr.upper = (u32) ((temp64 >> 32) & 0x0FFFFFFFFULL);
+ chain_sg->Addr = cpu_to_le64(temp64);
return 0;
}
struct CommandList *c)
{
struct SGDescriptor *chain_sg;
- union u64bit temp64;
- if (c->Header.SGTotal <= h->max_cmd_sg_entries)
+ if (le16_to_cpu(c->Header.SGTotal) <= h->max_cmd_sg_entries)
return;
chain_sg = &c->SG[h->max_cmd_sg_entries - 1];
- temp64.val32.lower = chain_sg->Addr.lower;
- temp64.val32.upper = chain_sg->Addr.upper;
- pci_unmap_single(h->pdev, temp64.val, chain_sg->Len, PCI_DMA_TODEVICE);
+ pci_unmap_single(h->pdev, le64_to_cpu(chain_sg->Addr),
+ le32_to_cpu(chain_sg->Len), PCI_DMA_TODEVICE);
}
struct io_accel1_cmd *c = &h->ioaccel_cmd_pool[cp->cmdindex];
cp->Header.SGList = cp->Header.SGTotal = scsi_sg_count(cmd);
cp->Request.CDBLen = c->io_flags & IOACCEL1_IOFLAGS_CDBLEN_MASK;
- cp->Header.Tag.lower = c->Tag.lower;
- cp->Header.Tag.upper = c->Tag.upper;
+ cp->Header.tag = c->tag;
memcpy(cp->Header.LUN.LunAddrBytes, c->CISS_LUN, 8);
memcpy(cp->Request.CDB, c->CDB, cp->Request.CDBLen);
/* Get addition sense code qualifier */
ascq = ei->SenseInfo[13];
}
-
if (ei->ScsiStatus == SAM_STAT_CHECK_CONDITION) {
- if (check_for_unit_attention(h, cp))
- break;
- if (sense_key == ILLEGAL_REQUEST) {
- /*
- * SCSI REPORT_LUNS is commonly unsupported on
- * Smart Array. Suppress noisy complaint.
- */
- if (cp->Request.CDB[0] == REPORT_LUNS)
- break;
-
- /* If ASC/ASCQ indicate Logical Unit
- * Not Supported condition,
- */
- if ((asc == 0x25) && (ascq == 0x0)) {
- dev_warn(&h->pdev->dev, "cp %p "
- "has check condition\n", cp);
- break;
- }
- }
-
- if (sense_key == NOT_READY) {
- /* If Sense is Not Ready, Logical Unit
- * Not ready, Manual Intervention
- * required
- */
- if ((asc == 0x04) && (ascq == 0x03)) {
- dev_warn(&h->pdev->dev, "cp %p "
- "has check condition: unit "
- "not ready, manual "
- "intervention required\n", cp);
- break;
- }
- }
if (sense_key == ABORTED_COMMAND) {
- /* Aborted command is retryable */
- dev_warn(&h->pdev->dev, "cp %p "
- "has check condition: aborted command: "
- "ASC: 0x%x, ASCQ: 0x%x\n",
- cp, asc, ascq);
cmd->result |= DID_SOFT_ERROR << 16;
break;
}
- /* Must be some other type of check condition */
- dev_dbg(&h->pdev->dev, "cp %p has check condition: "
- "unknown type: "
- "Sense: 0x%x, ASC: 0x%x, ASCQ: 0x%x, "
- "Returning result: 0x%x, "
- "cmd=[%02x %02x %02x %02x %02x "
- "%02x %02x %02x %02x %02x %02x "
- "%02x %02x %02x %02x %02x]\n",
- cp, sense_key, asc, ascq,
- cmd->result,
- cmd->cmnd[0], cmd->cmnd[1],
- cmd->cmnd[2], cmd->cmnd[3],
- cmd->cmnd[4], cmd->cmnd[5],
- cmd->cmnd[6], cmd->cmnd[7],
- cmd->cmnd[8], cmd->cmnd[9],
- cmd->cmnd[10], cmd->cmnd[11],
- cmd->cmnd[12], cmd->cmnd[13],
- cmd->cmnd[14], cmd->cmnd[15]);
break;
}
-
-
/* Problem was not a check condition
* Pass it up to the upper layers...
*/
struct CommandList *c, int sg_used, int data_direction)
{
int i;
- union u64bit addr64;
- for (i = 0; i < sg_used; i++) {
- addr64.val32.lower = c->SG[i].Addr.lower;
- addr64.val32.upper = c->SG[i].Addr.upper;
- pci_unmap_single(pdev, (dma_addr_t) addr64.val, c->SG[i].Len,
- data_direction);
- }
+ for (i = 0; i < sg_used; i++)
+ pci_unmap_single(pdev, (dma_addr_t) le64_to_cpu(c->SG[i].Addr),
+ le32_to_cpu(c->SG[i].Len),
+ data_direction);
}
static int hpsa_map_one(struct pci_dev *pdev,
if (buflen == 0 || data_direction == PCI_DMA_NONE) {
cp->Header.SGList = 0;
- cp->Header.SGTotal = 0;
+ cp->Header.SGTotal = cpu_to_le16(0);
return 0;
}
- addr64 = (u64) pci_map_single(pdev, buf, buflen, data_direction);
+ addr64 = pci_map_single(pdev, buf, buflen, data_direction);
if (dma_mapping_error(&pdev->dev, addr64)) {
/* Prevent subsequent unmap of something never mapped */
cp->Header.SGList = 0;
- cp->Header.SGTotal = 0;
+ cp->Header.SGTotal = cpu_to_le16(0);
return -1;
}
- cp->SG[0].Addr.lower =
- (u32) (addr64 & (u64) 0x00000000FFFFFFFF);
- cp->SG[0].Addr.upper =
- (u32) ((addr64 >> 32) & (u64) 0x00000000FFFFFFFF);
- cp->SG[0].Len = buflen;
- cp->SG[0].Ext = HPSA_SG_LAST; /* we are not chaining */
- cp->Header.SGList = (u8) 1; /* no. SGs contig in this cmd */
- cp->Header.SGTotal = (u16) 1; /* total sgs in this cmd list */
+ cp->SG[0].Addr = cpu_to_le64(addr64);
+ cp->SG[0].Len = cpu_to_le32(buflen);
+ cp->SG[0].Ext = cpu_to_le32(HPSA_SG_LAST); /* we are not chaining */
+ cp->Header.SGList = 1; /* no. SGs contig in this cmd */
+ cp->Header.SGTotal = cpu_to_le16(1); /* total sgs in cmd list */
return 0;
}
if (d == NULL)
return 0; /* no match */
- it_nexus = cpu_to_le32((u32) d->ioaccel_handle);
- scsi_nexus = cpu_to_le32((u32) c2a->scsi_nexus);
+ it_nexus = cpu_to_le32(d->ioaccel_handle);
+ scsi_nexus = cpu_to_le32(c2a->scsi_nexus);
find = c2a->scsi_nexus;
if (h->raid_offload_debug > 0)
* Returns 0 on success, -1 otherwise.
*/
static int hpsa_gather_lun_info(struct ctlr_info *h,
- int reportlunsize,
+ int reportphyslunsize, int reportloglunsize,
struct ReportLUNdata *physdev, u32 *nphysicals, int *physical_mode,
struct ReportLUNdata *logdev, u32 *nlogicals)
{
*physical_mode = HPSA_REPORT_PHYS_EXTENDED;
physical_entry_size = 24;
}
- if (hpsa_scsi_do_report_phys_luns(h, physdev, reportlunsize,
+ if (hpsa_scsi_do_report_phys_luns(h, physdev, reportphyslunsize,
*physical_mode)) {
dev_err(&h->pdev->dev, "report physical LUNs failed.\n");
return -1;
*nphysicals - HPSA_MAX_PHYS_LUN);
*nphysicals = HPSA_MAX_PHYS_LUN;
}
- if (hpsa_scsi_do_report_log_luns(h, logdev, reportlunsize)) {
+ if (hpsa_scsi_do_report_log_luns(h, logdev, reportloglunsize)) {
dev_err(&h->pdev->dev, "report logical LUNs failed.\n");
return -1;
}
return 0;
}
-u8 *figure_lunaddrbytes(struct ctlr_info *h, int raid_ctlr_position, int i,
- int nphysicals, int nlogicals,
+static u8 *figure_lunaddrbytes(struct ctlr_info *h, int raid_ctlr_position,
+ int i, int nphysicals, int nlogicals,
struct ReportExtendedLUNdata *physdev_list,
struct ReportLUNdata *logdev_list)
{
u32 ndev_allocated = 0;
struct hpsa_scsi_dev_t **currentsd, *this_device, *tmpdevice;
int ncurrent = 0;
- int reportlunsize = sizeof(*physdev_list) + HPSA_MAX_PHYS_LUN * 24;
int i, n_ext_target_devs, ndevs_to_allocate;
int raid_ctlr_position;
int rescan_hba_mode;
DECLARE_BITMAP(lunzerobits, MAX_EXT_TARGETS);
currentsd = kzalloc(sizeof(*currentsd) * HPSA_MAX_DEVICES, GFP_KERNEL);
- physdev_list = kzalloc(reportlunsize, GFP_KERNEL);
- logdev_list = kzalloc(reportlunsize, GFP_KERNEL);
+ physdev_list = kzalloc(sizeof(*physdev_list), GFP_KERNEL);
+ logdev_list = kzalloc(sizeof(*logdev_list), GFP_KERNEL);
tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL);
if (!currentsd || !physdev_list || !logdev_list || !tmpdevice) {
h->hba_mode_enabled = rescan_hba_mode;
- if (hpsa_gather_lun_info(h, reportlunsize,
+ if (hpsa_gather_lun_info(h,
+ sizeof(*physdev_list), sizeof(*logdev_list),
(struct ReportLUNdata *) physdev_list, &nphysicals,
&physical_mode, logdev_list, &nlogicals))
goto out;
}
addr64 = (u64) sg_dma_address(sg);
len = sg_dma_len(sg);
- curr_sg->Addr.lower = (u32) (addr64 & 0x0FFFFFFFFULL);
- curr_sg->Addr.upper = (u32) ((addr64 >> 32) & 0x0FFFFFFFFULL);
- curr_sg->Len = len;
- curr_sg->Ext = (i < scsi_sg_count(cmd) - 1) ? 0 : HPSA_SG_LAST;
+ curr_sg->Addr = cpu_to_le64(addr64);
+ curr_sg->Len = cpu_to_le32(len);
+ curr_sg->Ext = cpu_to_le32(0);
curr_sg++;
}
+ (--curr_sg)->Ext = cpu_to_le32(HPSA_SG_LAST);
if (use_sg + chained > h->maxSG)
h->maxSG = use_sg + chained;
if (chained) {
cp->Header.SGList = h->max_cmd_sg_entries;
- cp->Header.SGTotal = (u16) (use_sg + 1);
+ cp->Header.SGTotal = cpu_to_le16(use_sg + 1);
if (hpsa_map_sg_chain_block(h, cp)) {
scsi_dma_unmap(cmd);
return -1;
sglist_finished:
cp->Header.SGList = (u8) use_sg; /* no. SGs contig in this cmd */
- cp->Header.SGTotal = (u16) use_sg; /* total sgs in this cmd list */
+ cp->Header.SGTotal = cpu_to_le16(use_sg); /* total sgs in this cmd list */
return 0;
}
addr64 = (u64) sg_dma_address(sg);
len = sg_dma_len(sg);
total_len += len;
- curr_sg->Addr.lower = (u32) (addr64 & 0x0FFFFFFFFULL);
- curr_sg->Addr.upper =
- (u32) ((addr64 >> 32) & 0x0FFFFFFFFULL);
- curr_sg->Len = len;
-
- if (i == (scsi_sg_count(cmd) - 1))
- curr_sg->Ext = HPSA_SG_LAST;
- else
- curr_sg->Ext = 0; /* we are not chaining */
+ curr_sg->Addr = cpu_to_le64(addr64);
+ curr_sg->Len = cpu_to_le32(len);
+ curr_sg->Ext = cpu_to_le32(0);
curr_sg++;
}
+ (--curr_sg)->Ext = cpu_to_le32(HPSA_SG_LAST);
switch (cmd->sc_data_direction) {
case DMA_TO_DEVICE:
cp->data_len = cpu_to_le32(total_len);
cp->err_ptr = cpu_to_le64(c->busaddr +
offsetof(struct io_accel2_cmd, error_data));
- cp->err_len = cpu_to_le32((u32) sizeof(cp->error_data));
+ cp->err_len = cpu_to_le32(sizeof(cp->error_data));
enqueue_cmd_and_start_io(h, c);
return 0;
offload_to_mirror =
(offload_to_mirror >= map->layout_map_count - 1)
? 0 : offload_to_mirror + 1;
- /* FIXME: remove after debug/dev */
- BUG_ON(offload_to_mirror >= map->layout_map_count);
- dev_warn(&h->pdev->dev,
- "DEBUG: Using physical disk map index %d from mirror group %d\n",
- map_index, offload_to_mirror);
dev->offload_to_mirror = offload_to_mirror;
/* Avoid direct use of dev->offload_to_mirror within this
* function since multiple threads might simultaneously
dev->scsi3addr);
}
-static int hpsa_scsi_queue_command_lck(struct scsi_cmnd *cmd,
- void (*done)(struct scsi_cmnd *))
+/*
+ * Running in struct Scsi_Host->host_lock less mode using LLD internal
+ * struct ctlr_info *h->lock w/ spin_lock_irqsave() protection.
+ */
+static int hpsa_scsi_queue_command(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
{
struct ctlr_info *h;
struct hpsa_scsi_dev_t *dev;
dev = cmd->device->hostdata;
if (!dev) {
cmd->result = DID_NO_CONNECT << 16;
- done(cmd);
+ cmd->scsi_done(cmd);
return 0;
}
memcpy(scsi3addr, dev->scsi3addr, sizeof(scsi3addr));
if (unlikely(lockup_detected(h))) {
cmd->result = DID_ERROR << 16;
- done(cmd);
+ cmd->scsi_done(cmd);
return 0;
}
c = cmd_alloc(h);
}
/* Fill in the command list header */
-
- cmd->scsi_done = done; /* save this for use by completion code */
-
/* save c in case we have to abort it */
cmd->host_scribble = (unsigned char *) c;
c->Header.ReplyQueue = 0; /* unused in simple mode */
memcpy(&c->Header.LUN.LunAddrBytes[0], &scsi3addr[0], 8);
- c->Header.Tag.lower = (c->cmdindex << DIRECT_LOOKUP_SHIFT);
- c->Header.Tag.lower |= DIRECT_LOOKUP_BIT;
+ c->Header.tag = cpu_to_le64((c->cmdindex << DIRECT_LOOKUP_SHIFT) |
+ DIRECT_LOOKUP_BIT);
/* Fill in the request block... */
BUG_ON(cmd->cmd_len > sizeof(c->Request.CDB));
c->Request.CDBLen = cmd->cmd_len;
memcpy(c->Request.CDB, cmd->cmnd, cmd->cmd_len);
- c->Request.Type.Type = TYPE_CMD;
- c->Request.Type.Attribute = ATTR_SIMPLE;
switch (cmd->sc_data_direction) {
case DMA_TO_DEVICE:
- c->Request.Type.Direction = XFER_WRITE;
+ c->Request.type_attr_dir =
+ TYPE_ATTR_DIR(TYPE_CMD, ATTR_SIMPLE, XFER_WRITE);
break;
case DMA_FROM_DEVICE:
- c->Request.Type.Direction = XFER_READ;
+ c->Request.type_attr_dir =
+ TYPE_ATTR_DIR(TYPE_CMD, ATTR_SIMPLE, XFER_READ);
break;
case DMA_NONE:
- c->Request.Type.Direction = XFER_NONE;
+ c->Request.type_attr_dir =
+ TYPE_ATTR_DIR(TYPE_CMD, ATTR_SIMPLE, XFER_NONE);
break;
case DMA_BIDIRECTIONAL:
/* This can happen if a buggy application does a scsi passthru
* ../scsi/scsi_ioctl.c:scsi_ioctl_send_command() )
*/
- c->Request.Type.Direction = XFER_RSVD;
+ c->Request.type_attr_dir =
+ TYPE_ATTR_DIR(TYPE_CMD, ATTR_SIMPLE, XFER_RSVD);
/* This is technically wrong, and hpsa controllers should
* reject it with CMD_INVALID, which is the most correct
* response, but non-fibre backends appear to let it
return 0;
}
-static DEF_SCSI_QCMD(hpsa_scsi_queue_command)
-
static int do_not_scan_if_controller_locked_up(struct ctlr_info *h)
{
unsigned long flags;
return finished;
}
-static int hpsa_change_queue_depth(struct scsi_device *sdev,
- int qdepth, int reason)
-{
- struct ctlr_info *h = sdev_to_hba(sdev);
-
- if (reason != SCSI_QDEPTH_DEFAULT)
- return -ENOTSUPP;
-
- if (qdepth < 1)
- qdepth = 1;
- else
- if (qdepth > h->nr_cmds)
- qdepth = h->nr_cmds;
- scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
- return sdev->queue_depth;
-}
-
static void hpsa_unregister_scsi(struct ctlr_info *h)
{
/* we are being forcibly unloaded, and may not refuse. */
if (c->cmd_type == CMD_IOACCEL1) {
struct io_accel1_cmd *cm1 = (struct io_accel1_cmd *)
&h->ioaccel_cmd_pool[c->cmdindex];
- *tagupper = cm1->Tag.upper;
- *taglower = cm1->Tag.lower;
+ *tagupper = (u32) (cm1->tag >> 32);
+ *taglower = (u32) (cm1->tag & 0x0ffffffffULL);
return;
}
if (c->cmd_type == CMD_IOACCEL2) {
*taglower = cm2->Tag;
return;
}
- *tagupper = c->Header.Tag.upper;
- *taglower = c->Header.Tag.lower;
+ *tagupper = (u32) (c->Header.tag >> 32);
+ *taglower = (u32) (c->Header.tag & 0x0ffffffffULL);
}
-
static int hpsa_send_abort(struct ctlr_info *h, unsigned char *scsi3addr,
struct CommandList *abort, int swizzle)
{
struct CommandList *c = NULL; /* ptr into cmpQ */
if (!find)
- return 0;
+ return NULL;
spin_lock_irqsave(&h->lock, flags);
list_for_each_entry(c, queue_head, list) {
if (c->scsi_cmd == NULL) /* e.g.: passthru ioctl */
spin_lock_irqsave(&h->lock, flags);
list_for_each_entry(c, queue_head, list) {
- if (memcmp(&c->Header.Tag, tag, 8) != 0)
+ if (memcmp(&c->Header.tag, tag, 8) != 0)
continue;
spin_unlock_irqrestore(&h->lock, flags);
return c;
int i;
union u64bit temp64;
dma_addr_t cmd_dma_handle, err_dma_handle;
- unsigned long flags;
+ int loopcount;
+
+ /* There is some *extremely* small but non-zero chance that that
+ * multiple threads could get in here, and one thread could
+ * be scanning through the list of bits looking for a free
+ * one, but the free ones are always behind him, and other
+ * threads sneak in behind him and eat them before he can
+ * get to them, so that while there is always a free one, a
+ * very unlucky thread might be starved anyway, never able to
+ * beat the other threads. In reality, this happens so
+ * infrequently as to be indistinguishable from never.
+ */
- spin_lock_irqsave(&h->lock, flags);
+ loopcount = 0;
do {
i = find_first_zero_bit(h->cmd_pool_bits, h->nr_cmds);
- if (i == h->nr_cmds) {
- spin_unlock_irqrestore(&h->lock, flags);
- return NULL;
- }
- } while (test_and_set_bit
- (i & (BITS_PER_LONG - 1),
- h->cmd_pool_bits + (i / BITS_PER_LONG)) != 0);
- spin_unlock_irqrestore(&h->lock, flags);
+ if (i == h->nr_cmds)
+ i = 0;
+ loopcount++;
+ } while (test_and_set_bit(i & (BITS_PER_LONG - 1),
+ h->cmd_pool_bits + (i / BITS_PER_LONG)) != 0 &&
+ loopcount < 10);
+
+ /* Thread got starved? We do not expect this to ever happen. */
+ if (loopcount >= 10)
+ return NULL;
c = h->cmd_pool + i;
memset(c, 0, sizeof(*c));
INIT_LIST_HEAD(&c->list);
c->busaddr = (u32) cmd_dma_handle;
temp64.val = (u64) err_dma_handle;
- c->ErrDesc.Addr.lower = temp64.val32.lower;
- c->ErrDesc.Addr.upper = temp64.val32.upper;
- c->ErrDesc.Len = sizeof(*c->err_info);
+ c->ErrDesc.Addr = cpu_to_le64(err_dma_handle);
+ c->ErrDesc.Len = cpu_to_le32(sizeof(*c->err_info));
c->h = h;
return c;
static struct CommandList *cmd_special_alloc(struct ctlr_info *h)
{
struct CommandList *c;
- union u64bit temp64;
dma_addr_t cmd_dma_handle, err_dma_handle;
c = pci_zalloc_consistent(h->pdev, sizeof(*c), &cmd_dma_handle);
INIT_LIST_HEAD(&c->list);
c->busaddr = (u32) cmd_dma_handle;
- temp64.val = (u64) err_dma_handle;
- c->ErrDesc.Addr.lower = temp64.val32.lower;
- c->ErrDesc.Addr.upper = temp64.val32.upper;
- c->ErrDesc.Len = sizeof(*c->err_info);
+ c->ErrDesc.Addr = cpu_to_le64(err_dma_handle);
+ c->ErrDesc.Len = cpu_to_le32(sizeof(*c->err_info));
c->h = h;
return c;
static void cmd_free(struct ctlr_info *h, struct CommandList *c)
{
int i;
- unsigned long flags;
i = c - h->cmd_pool;
- spin_lock_irqsave(&h->lock, flags);
clear_bit(i & (BITS_PER_LONG - 1),
h->cmd_pool_bits + (i / BITS_PER_LONG));
- spin_unlock_irqrestore(&h->lock, flags);
}
static void cmd_special_free(struct ctlr_info *h, struct CommandList *c)
{
- union u64bit temp64;
-
- temp64.val32.lower = c->ErrDesc.Addr.lower;
- temp64.val32.upper = c->ErrDesc.Addr.upper;
pci_free_consistent(h->pdev, sizeof(*c->err_info),
- c->err_info, (dma_addr_t) temp64.val);
+ c->err_info,
+ (dma_addr_t) le64_to_cpu(c->ErrDesc.Addr));
pci_free_consistent(h->pdev, sizeof(*c),
c, (dma_addr_t) (c->busaddr & DIRECT_LOOKUP_MASK));
}
#ifdef CONFIG_COMPAT
-static int hpsa_ioctl32_passthru(struct scsi_device *dev, int cmd, void *arg)
+static int hpsa_ioctl32_passthru(struct scsi_device *dev, int cmd,
+ void __user *arg)
{
IOCTL32_Command_struct __user *arg32 =
(IOCTL32_Command_struct __user *) arg;
if (err)
return -EFAULT;
- err = hpsa_ioctl(dev, CCISS_PASSTHRU, (void *)p);
+ err = hpsa_ioctl(dev, CCISS_PASSTHRU, p);
if (err)
return err;
err |= copy_in_user(&arg32->error_info, &p->error_info,
}
static int hpsa_ioctl32_big_passthru(struct scsi_device *dev,
- int cmd, void *arg)
+ int cmd, void __user *arg)
{
BIG_IOCTL32_Command_struct __user *arg32 =
(BIG_IOCTL32_Command_struct __user *) arg;
if (err)
return -EFAULT;
- err = hpsa_ioctl(dev, CCISS_BIG_PASSTHRU, (void *)p);
+ err = hpsa_ioctl(dev, CCISS_BIG_PASSTHRU, p);
if (err)
return err;
err |= copy_in_user(&arg32->error_info, &p->error_info,
return err;
}
-static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd, void *arg)
+static int hpsa_compat_ioctl(struct scsi_device *dev, int cmd, void __user *arg)
{
switch (cmd) {
case CCISS_GETPCIINFO:
IOCTL_Command_struct iocommand;
struct CommandList *c;
char *buff = NULL;
- union u64bit temp64;
+ u64 temp64;
int rc = 0;
if (!argp)
c->Header.ReplyQueue = 0; /* unused in simple mode */
if (iocommand.buf_size > 0) { /* buffer to fill */
c->Header.SGList = 1;
- c->Header.SGTotal = 1;
+ c->Header.SGTotal = cpu_to_le16(1);
} else { /* no buffers to fill */
c->Header.SGList = 0;
- c->Header.SGTotal = 0;
+ c->Header.SGTotal = cpu_to_le16(0);
}
memcpy(&c->Header.LUN, &iocommand.LUN_info, sizeof(c->Header.LUN));
/* use the kernel address the cmd block for tag */
- c->Header.Tag.lower = c->busaddr;
+ c->Header.tag = c->busaddr;
/* Fill in Request block */
memcpy(&c->Request, &iocommand.Request,
/* Fill in the scatter gather information */
if (iocommand.buf_size > 0) {
- temp64.val = pci_map_single(h->pdev, buff,
+ temp64 = pci_map_single(h->pdev, buff,
iocommand.buf_size, PCI_DMA_BIDIRECTIONAL);
- if (dma_mapping_error(&h->pdev->dev, temp64.val)) {
- c->SG[0].Addr.lower = 0;
- c->SG[0].Addr.upper = 0;
- c->SG[0].Len = 0;
+ if (dma_mapping_error(&h->pdev->dev, (dma_addr_t) temp64)) {
+ c->SG[0].Addr = cpu_to_le64(0);
+ c->SG[0].Len = cpu_to_le32(0);
rc = -ENOMEM;
goto out;
}
- c->SG[0].Addr.lower = temp64.val32.lower;
- c->SG[0].Addr.upper = temp64.val32.upper;
- c->SG[0].Len = iocommand.buf_size;
- c->SG[0].Ext = HPSA_SG_LAST; /* we are not chaining*/
+ c->SG[0].Addr = cpu_to_le64(temp64);
+ c->SG[0].Len = cpu_to_le32(iocommand.buf_size);
+ c->SG[0].Ext = cpu_to_le32(HPSA_SG_LAST); /* not chaining */
}
hpsa_scsi_do_simple_cmd_core_if_no_lockup(h, c);
if (iocommand.buf_size > 0)
struct CommandList *c;
unsigned char **buff = NULL;
int *buff_size = NULL;
- union u64bit temp64;
+ u64 temp64;
BYTE sg_used = 0;
int status = 0;
int i;
}
c->cmd_type = CMD_IOCTL_PEND;
c->Header.ReplyQueue = 0;
- c->Header.SGList = c->Header.SGTotal = sg_used;
+ c->Header.SGList = (u8) sg_used;
+ c->Header.SGTotal = cpu_to_le16(sg_used);
memcpy(&c->Header.LUN, &ioc->LUN_info, sizeof(c->Header.LUN));
- c->Header.Tag.lower = c->busaddr;
+ c->Header.tag = c->busaddr;
memcpy(&c->Request, &ioc->Request, sizeof(c->Request));
if (ioc->buf_size > 0) {
int i;
for (i = 0; i < sg_used; i++) {
- temp64.val = pci_map_single(h->pdev, buff[i],
+ temp64 = pci_map_single(h->pdev, buff[i],
buff_size[i], PCI_DMA_BIDIRECTIONAL);
- if (dma_mapping_error(&h->pdev->dev, temp64.val)) {
- c->SG[i].Addr.lower = 0;
- c->SG[i].Addr.upper = 0;
- c->SG[i].Len = 0;
+ if (dma_mapping_error(&h->pdev->dev,
+ (dma_addr_t) temp64)) {
+ c->SG[i].Addr = cpu_to_le64(0);
+ c->SG[i].Len = cpu_to_le32(0);
hpsa_pci_unmap(h->pdev, c, i,
PCI_DMA_BIDIRECTIONAL);
status = -ENOMEM;
goto cleanup0;
}
- c->SG[i].Addr.lower = temp64.val32.lower;
- c->SG[i].Addr.upper = temp64.val32.upper;
- c->SG[i].Len = buff_size[i];
- c->SG[i].Ext = i < sg_used - 1 ? 0 : HPSA_SG_LAST;
+ c->SG[i].Addr = cpu_to_le64(temp64);
+ c->SG[i].Len = cpu_to_le32(buff_size[i]);
+ c->SG[i].Ext = cpu_to_le32(0);
}
+ c->SG[--i].Ext = cpu_to_le32(HPSA_SG_LAST);
}
hpsa_scsi_do_simple_cmd_core_if_no_lockup(h, c);
if (sg_used)
/*
* ioctl
*/
-static int hpsa_ioctl(struct scsi_device *dev, int cmd, void *arg)
+static int hpsa_ioctl(struct scsi_device *dev, int cmd, void __user *arg)
{
struct ctlr_info *h;
void __user *argp = (void __user *)arg;
{
int pci_dir = XFER_NONE;
struct CommandList *a; /* for commands to be aborted */
+ u32 tupper, tlower;
c->cmd_type = CMD_IOCTL_PEND;
c->Header.ReplyQueue = 0;
if (buff != NULL && size > 0) {
c->Header.SGList = 1;
- c->Header.SGTotal = 1;
+ c->Header.SGTotal = cpu_to_le16(1);
} else {
c->Header.SGList = 0;
- c->Header.SGTotal = 0;
+ c->Header.SGTotal = cpu_to_le16(0);
}
- c->Header.Tag.lower = c->busaddr;
+ c->Header.tag = c->busaddr;
memcpy(c->Header.LUN.LunAddrBytes, scsi3addr, 8);
- c->Request.Type.Type = cmd_type;
if (cmd_type == TYPE_CMD) {
switch (cmd) {
case HPSA_INQUIRY:
c->Request.CDB[2] = (page_code & 0xff);
}
c->Request.CDBLen = 6;
- c->Request.Type.Attribute = ATTR_SIMPLE;
- c->Request.Type.Direction = XFER_READ;
+ c->Request.type_attr_dir =
+ TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
c->Request.Timeout = 0;
c->Request.CDB[0] = HPSA_INQUIRY;
c->Request.CDB[4] = size & 0xFF;
mode = 00 target = 0. Nothing to write.
*/
c->Request.CDBLen = 12;
- c->Request.Type.Attribute = ATTR_SIMPLE;
- c->Request.Type.Direction = XFER_READ;
+ c->Request.type_attr_dir =
+ TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
c->Request.Timeout = 0;
c->Request.CDB[0] = cmd;
c->Request.CDB[6] = (size >> 24) & 0xFF; /* MSB */
break;
case HPSA_CACHE_FLUSH:
c->Request.CDBLen = 12;
- c->Request.Type.Attribute = ATTR_SIMPLE;
- c->Request.Type.Direction = XFER_WRITE;
+ c->Request.type_attr_dir =
+ TYPE_ATTR_DIR(cmd_type,
+ ATTR_SIMPLE, XFER_WRITE);
c->Request.Timeout = 0;
c->Request.CDB[0] = BMIC_WRITE;
c->Request.CDB[6] = BMIC_CACHE_FLUSH;
break;
case TEST_UNIT_READY:
c->Request.CDBLen = 6;
- c->Request.Type.Attribute = ATTR_SIMPLE;
- c->Request.Type.Direction = XFER_NONE;
+ c->Request.type_attr_dir =
+ TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_NONE);
c->Request.Timeout = 0;
break;
case HPSA_GET_RAID_MAP:
c->Request.CDBLen = 12;
- c->Request.Type.Attribute = ATTR_SIMPLE;
- c->Request.Type.Direction = XFER_READ;
+ c->Request.type_attr_dir =
+ TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
c->Request.Timeout = 0;
c->Request.CDB[0] = HPSA_CISS_READ;
c->Request.CDB[1] = cmd;
break;
case BMIC_SENSE_CONTROLLER_PARAMETERS:
c->Request.CDBLen = 10;
- c->Request.Type.Attribute = ATTR_SIMPLE;
- c->Request.Type.Direction = XFER_READ;
+ c->Request.type_attr_dir =
+ TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_READ);
c->Request.Timeout = 0;
c->Request.CDB[0] = BMIC_READ;
c->Request.CDB[6] = BMIC_SENSE_CONTROLLER_PARAMETERS;
case HPSA_DEVICE_RESET_MSG:
c->Request.CDBLen = 16;
- c->Request.Type.Type = 1; /* It is a MSG not a CMD */
- c->Request.Type.Attribute = ATTR_SIMPLE;
- c->Request.Type.Direction = XFER_NONE;
+ c->Request.type_attr_dir =
+ TYPE_ATTR_DIR(cmd_type, ATTR_SIMPLE, XFER_NONE);
c->Request.Timeout = 0; /* Don't time out */
memset(&c->Request.CDB[0], 0, sizeof(c->Request.CDB));
c->Request.CDB[0] = cmd;
break;
case HPSA_ABORT_MSG:
a = buff; /* point to command to be aborted */
- dev_dbg(&h->pdev->dev, "Abort Tag:0x%08x:%08x using request Tag:0x%08x:%08x\n",
- a->Header.Tag.upper, a->Header.Tag.lower,
- c->Header.Tag.upper, c->Header.Tag.lower);
+ dev_dbg(&h->pdev->dev, "Abort Tag:0x%016llx using request Tag:0x%016llx",
+ a->Header.tag, c->Header.tag);
+ tlower = (u32) (a->Header.tag >> 32);
+ tupper = (u32) (a->Header.tag & 0x0ffffffffULL);
c->Request.CDBLen = 16;
- c->Request.Type.Type = TYPE_MSG;
- c->Request.Type.Attribute = ATTR_SIMPLE;
- c->Request.Type.Direction = XFER_WRITE;
+ c->Request.type_attr_dir =
+ TYPE_ATTR_DIR(cmd_type,
+ ATTR_SIMPLE, XFER_WRITE);
c->Request.Timeout = 0; /* Don't time out */
c->Request.CDB[0] = HPSA_TASK_MANAGEMENT;
c->Request.CDB[1] = HPSA_TMF_ABORT_TASK;
c->Request.CDB[2] = 0x00; /* reserved */
c->Request.CDB[3] = 0x00; /* reserved */
/* Tag to abort goes in CDB[4]-CDB[11] */
- c->Request.CDB[4] = a->Header.Tag.lower & 0xFF;
- c->Request.CDB[5] = (a->Header.Tag.lower >> 8) & 0xFF;
- c->Request.CDB[6] = (a->Header.Tag.lower >> 16) & 0xFF;
- c->Request.CDB[7] = (a->Header.Tag.lower >> 24) & 0xFF;
- c->Request.CDB[8] = a->Header.Tag.upper & 0xFF;
- c->Request.CDB[9] = (a->Header.Tag.upper >> 8) & 0xFF;
- c->Request.CDB[10] = (a->Header.Tag.upper >> 16) & 0xFF;
- c->Request.CDB[11] = (a->Header.Tag.upper >> 24) & 0xFF;
+ c->Request.CDB[4] = tlower & 0xFF;
+ c->Request.CDB[5] = (tlower >> 8) & 0xFF;
+ c->Request.CDB[6] = (tlower >> 16) & 0xFF;
+ c->Request.CDB[7] = (tlower >> 24) & 0xFF;
+ c->Request.CDB[8] = tupper & 0xFF;
+ c->Request.CDB[9] = (tupper >> 8) & 0xFF;
+ c->Request.CDB[10] = (tupper >> 16) & 0xFF;
+ c->Request.CDB[11] = (tupper >> 24) & 0xFF;
c->Request.CDB[12] = 0x00; /* reserved */
c->Request.CDB[13] = 0x00; /* reserved */
c->Request.CDB[14] = 0x00; /* reserved */
BUG();
}
- switch (c->Request.Type.Direction) {
+ switch (GET_DIR(c->Request.type_attr_dir)) {
case XFER_READ:
pci_dir = PCI_DMA_FROMDEVICE;
break;
/* Put job onto the completed Q */
addQ(&h->cmpQ, c);
-
- /* Must increment commands_outstanding before unlocking
- * and submitting to avoid race checking for fifo full
- * condition.
- */
- h->commands_outstanding++;
-
- /* Tell the controller execute command */
+ atomic_inc(&h->commands_outstanding);
spin_unlock_irqrestore(&h->lock, *flags);
+ /* Tell the controller execute command */
h->access.submit_command(h, c);
spin_lock_irqsave(&h->lock, *flags);
}
unsigned long flags;
int io_may_be_stalled = 0;
struct ctlr_info *h = c->h;
+ int count;
spin_lock_irqsave(&h->lock, flags);
removeQ(c);
* want to get in a cycle where we call start_io every time
* through here.
*/
- if (unlikely(h->fifo_recently_full) &&
- h->commands_outstanding < 5)
- io_may_be_stalled = 1;
-
+ count = atomic_read(&h->commands_outstanding);
spin_unlock_irqrestore(&h->lock, flags);
+ if (unlikely(h->fifo_recently_full) && count < 5)
+ io_may_be_stalled = 1;
dial_up_lockup_detection_on_fw_flash_complete(c->h, c);
if (likely(c->cmd_type == CMD_IOACCEL1 || c->cmd_type == CMD_SCSI
cmd->CommandHeader.ReplyQueue = 0;
cmd->CommandHeader.SGList = 0;
- cmd->CommandHeader.SGTotal = 0;
- cmd->CommandHeader.Tag.lower = paddr32;
- cmd->CommandHeader.Tag.upper = 0;
+ cmd->CommandHeader.SGTotal = cpu_to_le16(0);
+ cmd->CommandHeader.tag = paddr32;
memset(&cmd->CommandHeader.LUN.LunAddrBytes, 0, 8);
cmd->Request.CDBLen = 16;
- cmd->Request.Type.Type = TYPE_MSG;
- cmd->Request.Type.Attribute = ATTR_HEADOFQUEUE;
- cmd->Request.Type.Direction = XFER_NONE;
+ cmd->Request.type_attr_dir =
+ TYPE_ATTR_DIR(TYPE_MSG, ATTR_HEADOFQUEUE, XFER_NONE);
cmd->Request.Timeout = 0; /* Don't time out */
cmd->Request.CDB[0] = opcode;
cmd->Request.CDB[1] = type;
memset(&cmd->Request.CDB[2], 0, 14); /* rest of the CDB is reserved */
- cmd->ErrorDescriptor.Addr.lower = paddr32 + sizeof(*cmd);
- cmd->ErrorDescriptor.Addr.upper = 0;
- cmd->ErrorDescriptor.Len = sizeof(struct ErrorInfo);
+ cmd->ErrorDescriptor.Addr =
+ cpu_to_le64((paddr32 + sizeof(*cmd)));
+ cmd->ErrorDescriptor.Len = cpu_to_le32(sizeof(struct ErrorInfo));
writel(paddr32, vaddr + SA5_REQUEST_PORT_OFFSET);
#define hpsa_noop(p) hpsa_message(p, 3, 0)
static int hpsa_controller_hard_reset(struct pci_dev *pdev,
- void * __iomem vaddr, u32 use_doorbell)
+ void __iomem *vaddr, u32 use_doorbell)
{
u16 pmcsr;
int pos;
* the io functions.
* This is for debug only.
*/
-static void print_cfg_table(struct device *dev, struct CfgTable *tb)
+static void print_cfg_table(struct device *dev, struct CfgTable __iomem *tb)
{
#ifdef HPSA_DEBUG
int i;
h->max_cmd_sg_entries = 31;
if (h->maxsgentries > 512) {
h->max_cmd_sg_entries = 32;
- h->chainsize = h->maxsgentries - h->max_cmd_sg_entries + 1;
+ h->chainsize = h->maxsgentries - h->max_cmd_sg_entries;
h->maxsgentries--; /* save one for chain pointer */
} else {
- h->maxsgentries = 31; /* default to traditional values */
h->chainsize = 0;
+ h->maxsgentries = 31; /* default to traditional values */
}
/* Find out what task management functions are supported and cache */
return err;
}
- /* Enable bus mastering (pci_disable_device may disable this) */
- pci_set_master(h->pdev);
-
err = pci_request_regions(h->pdev, HPSA);
if (err) {
dev_err(&h->pdev->dev,
"cannot obtain PCI resources, aborting\n");
return err;
}
+
+ pci_set_master(h->pdev);
+
hpsa_interrupt_mode(h);
err = hpsa_pci_find_memory_BAR(h->pdev, &h->paddr);
if (err)
dev_warn(&pdev->dev, "failed to enable device.\n");
return -ENODEV;
}
+
pci_set_master(pdev);
+
/* Reset the controller with a PCI power-cycle or via doorbell */
rc = hpsa_kdump_hard_reset_controller(pdev);
cp->host_context_flags = IOACCEL1_HCFLAGS_CISS_FORMAT;
cp->timeout_sec = 0;
cp->ReplyQueue = 0;
- cp->Tag.lower = (i << DIRECT_LOOKUP_SHIFT) |
- DIRECT_LOOKUP_BIT;
- cp->Tag.upper = 0;
- cp->host_addr.lower =
- (u32) (h->ioaccel_cmd_pool_dhandle +
+ cp->tag =
+ cpu_to_le64((i << DIRECT_LOOKUP_SHIFT) |
+ DIRECT_LOOKUP_BIT);
+ cp->host_addr =
+ cpu_to_le64(h->ioaccel_cmd_pool_dhandle +
(i * sizeof(struct io_accel1_cmd)));
- cp->host_addr.upper = 0;
}
} else if (trans_support & CFGTBL_Trans_io_accel2) {
u64 cfg_offset, cfg_base_addr_index;
VERIFY_OFFSET(timeout_sec, 0x62);
VERIFY_OFFSET(ReplyQueue, 0x64);
VERIFY_OFFSET(reserved9, 0x65);
- VERIFY_OFFSET(Tag, 0x68);
+ VERIFY_OFFSET(tag, 0x68);
VERIFY_OFFSET(host_addr, 0x70);
VERIFY_OFFSET(CISS_LUN, 0x78);
VERIFY_OFFSET(SG, 0x78 + 8);
struct CfgTable __iomem *cfgtable;
int interrupts_enabled;
int max_commands;
- int commands_outstanding;
+ atomic_t commands_outstanding;
# define PERF_MODE_INT 0
# define DOORBELL_INT 1
# define SIMPLE_MODE_INT 2
*/
u32 trans_support;
u32 trans_offset;
- struct TransTable_struct *transtable;
+ struct TransTable_struct __iomem *transtable;
unsigned long transMethod;
/* cap concurrent passthrus at some reasonable maximum */
u32 *blockFetchTable;
u32 *ioaccel1_blockFetchTable;
u32 *ioaccel2_blockFetchTable;
- u32 *ioaccel2_bft2_regs;
+ u32 __iomem *ioaccel2_bft2_regs;
unsigned char *hba_inquiry_data;
u32 driver_support;
u32 fw_support;
u64 last_heartbeat_timestamp;
u32 heartbeat_sample_interval;
atomic_t firmware_flash_in_progress;
- u32 *lockup_detected;
+ u32 __percpu *lockup_detected;
struct delayed_work monitor_ctlr_work;
int remove_in_progress;
u32 fifo_recently_full;
static unsigned long SA5_performant_completed(struct ctlr_info *h, u8 q)
{
struct reply_queue_buffer *rq = &h->reply_queue[q];
- unsigned long flags, register_value = FIFO_EMPTY;
+ unsigned long register_value = FIFO_EMPTY;
/* msi auto clears the interrupt pending bit. */
if (!(h->msi_vector || h->msix_vector)) {
if ((rq->head[rq->current_entry] & 1) == rq->wraparound) {
register_value = rq->head[rq->current_entry];
rq->current_entry++;
- spin_lock_irqsave(&h->lock, flags);
- h->commands_outstanding--;
- spin_unlock_irqrestore(&h->lock, flags);
+ atomic_dec(&h->commands_outstanding);
} else {
register_value = FIFO_EMPTY;
}
*/
static unsigned long SA5_fifo_full(struct ctlr_info *h)
{
- if (h->commands_outstanding >= h->max_commands)
- return 1;
- else
- return 0;
-
+ return atomic_read(&h->commands_outstanding) >= h->max_commands;
}
/*
* returns value read from hardware.
{
unsigned long register_value
= readl(h->vaddr + SA5_REPLY_PORT_OFFSET);
- unsigned long flags;
- if (register_value != FIFO_EMPTY) {
- spin_lock_irqsave(&h->lock, flags);
- h->commands_outstanding--;
- spin_unlock_irqrestore(&h->lock, flags);
- }
+ if (register_value != FIFO_EMPTY)
+ atomic_dec(&h->commands_outstanding);
#ifdef HPSA_DEBUG
if (register_value != FIFO_EMPTY)
{
u64 register_value;
struct reply_queue_buffer *rq = &h->reply_queue[q];
- unsigned long flags;
BUG_ON(q >= h->nreply_queues);
wmb();
writel((q << 24) | rq->current_entry, h->vaddr +
IOACCEL_MODE1_CONSUMER_INDEX);
- spin_lock_irqsave(&h->lock, flags);
- h->commands_outstanding--;
- spin_unlock_irqrestore(&h->lock, flags);
+ atomic_dec(&h->commands_outstanding);
}
return (unsigned long) register_value;
}
u8 LUNListLength[4];
u8 extended_response_flag;
u8 reserved[3];
- struct ext_report_lun_entry LUN[HPSA_MAX_LUN];
+ struct ext_report_lun_entry LUN[HPSA_MAX_PHYS_LUN];
};
struct SenseSubsystem_info {
u8 ReplyQueue;
u8 SGList;
u16 SGTotal;
- struct vals32 Tag;
+ u64 tag;
union LUNAddr LUN;
};
struct RequestBlock {
u8 CDBLen;
- struct {
- u8 Type:3;
- u8 Attribute:3;
- u8 Direction:2;
- } Type;
+ /*
+ * type_attr_dir:
+ * type: low 3 bits
+ * attr: middle 3 bits
+ * dir: high 2 bits
+ */
+ u8 type_attr_dir;
+#define TYPE_ATTR_DIR(t, a, d) ((((d) & 0x03) << 6) |\
+ (((a) & 0x07) << 3) |\
+ ((t) & 0x07))
+#define GET_TYPE(tad) ((tad) & 0x07)
+#define GET_ATTR(tad) (((tad) >> 3) & 0x07)
+#define GET_DIR(tad) (((tad) >> 6) & 0x03)
u16 Timeout;
u8 CDB[16];
};
struct ErrDescriptor {
- struct vals32 Addr;
+ u64 Addr;
u32 Len;
};
struct SGDescriptor {
- struct vals32 Addr;
+ u64 Addr;
u32 Len;
u32 Ext;
};
u16 timeout_sec; /* 0x62 - 0x63 */
u8 ReplyQueue; /* 0x64 */
u8 reserved9[3]; /* 0x65 - 0x67 */
- struct vals32 Tag; /* 0x68 - 0x6F */
- struct vals32 host_addr; /* 0x70 - 0x77 */
+ u64 tag; /* 0x68 - 0x6F */
+ u64 host_addr; /* 0x70 - 0x77 */
u8 CISS_LUN[8]; /* 0x78 - 0x7F */
struct SGDescriptor SG[IOACCEL1_MAXSGENTRIES];
} __aligned(IOACCEL1_COMMANDLIST_ALIGNMENT);
u8 reserved1; /* byte 3 Reserved */
u32 it_nexus; /* SCSI I-T Nexus */
u8 lun_id[8]; /* LUN ID for TMF request */
- struct vals32 Tag; /* cciss tag associated w/ request */
- struct vals32 abort_tag;/* cciss tag of SCSI cmd or task to abort */
+ u64 tag; /* cciss tag associated w/ request */
+ u64 abort_tag; /* cciss tag of SCSI cmd or task to abort */
u64 error_ptr; /* Error Pointer */
u32 error_len; /* Error Length */
};
}
static int hptiop_adjust_disk_queue_depth(struct scsi_device *sdev,
- int queue_depth, int reason)
+ int queue_depth)
{
struct hptiop_hba *hba = (struct hptiop_hba *)sdev->host->hostdata;
- if (reason != SCSI_QDEPTH_DEFAULT)
- return -EOPNOTSUPP;
-
if (queue_depth > hba->max_requests)
queue_depth = hba->max_requests;
- scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, queue_depth);
- return queue_depth;
+ return scsi_change_queue_depth(sdev, queue_depth);
}
static ssize_t hptiop_show_version(struct device *dev,
int_to_scsilun(cmnd->device->lun, &vfc_cmd->iu.lun);
memcpy(vfc_cmd->iu.cdb, cmnd->cmnd, cmnd->cmd_len);
- if (scsi_populate_tag_msg(cmnd, tag)) {
- vfc_cmd->task_tag = cpu_to_be64(tag[1]);
- switch (tag[0]) {
- case MSG_SIMPLE_TAG:
- vfc_cmd->iu.pri_task_attr = IBMVFC_SIMPLE_TASK;
- break;
- case MSG_HEAD_TAG:
- vfc_cmd->iu.pri_task_attr = IBMVFC_HEAD_OF_QUEUE;
- break;
- case MSG_ORDERED_TAG:
- vfc_cmd->iu.pri_task_attr = IBMVFC_ORDERED_TASK;
- break;
- };
+ if (cmnd->flags & SCMD_TAGGED) {
+ vfc_cmd->task_tag = cpu_to_be64(cmnd->tag);
+ vfc_cmd->iu.pri_task_attr = IBMVFC_SIMPLE_TASK;
}
if (likely(!(rc = ibmvfc_map_sg_data(cmnd, evt, vfc_cmd, vhost->dev))))
spin_lock_irqsave(shost->host_lock, flags);
if (sdev->type == TYPE_DISK)
sdev->allow_restart = 1;
-
- if (sdev->tagged_supported) {
- scsi_set_tag_type(sdev, MSG_SIMPLE_TAG);
- scsi_activate_tcq(sdev, sdev->queue_depth);
- } else
- scsi_deactivate_tcq(sdev, sdev->queue_depth);
spin_unlock_irqrestore(shost->host_lock, flags);
return 0;
}
* Return value:
* actual depth set
**/
-static int ibmvfc_change_queue_depth(struct scsi_device *sdev, int qdepth,
- int reason)
+static int ibmvfc_change_queue_depth(struct scsi_device *sdev, int qdepth)
{
- if (reason != SCSI_QDEPTH_DEFAULT)
- return -EOPNOTSUPP;
-
if (qdepth > IBMVFC_MAX_CMDS_PER_LUN)
qdepth = IBMVFC_MAX_CMDS_PER_LUN;
- scsi_adjust_queue_depth(sdev, 0, qdepth);
- return sdev->queue_depth;
-}
-
-/**
- * ibmvfc_change_queue_type - Change the device's queue type
- * @sdev: scsi device struct
- * @tag_type: type of tags to use
- *
- * Return value:
- * actual queue type set
- **/
-static int ibmvfc_change_queue_type(struct scsi_device *sdev, int tag_type)
-{
- if (sdev->tagged_supported) {
- scsi_set_tag_type(sdev, tag_type);
-
- if (tag_type)
- scsi_activate_tcq(sdev, sdev->queue_depth);
- else
- scsi_deactivate_tcq(sdev, sdev->queue_depth);
- } else
- tag_type = 0;
-
- return tag_type;
+ return scsi_change_queue_depth(sdev, qdepth);
}
static ssize_t ibmvfc_show_host_partition_name(struct device *dev,
.target_alloc = ibmvfc_target_alloc,
.scan_finished = ibmvfc_scan_finished,
.change_queue_depth = ibmvfc_change_queue_depth,
- .change_queue_type = ibmvfc_change_queue_type,
+ .change_queue_type = scsi_change_queue_type,
.cmd_per_lun = 16,
.can_queue = IBMVFC_MAX_REQUESTS_DEFAULT,
.this_id = -1,
.max_sectors = IBMVFC_MAX_SECTORS,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = ibmvfc_attrs,
+ .use_blk_tags = 1,
+ .track_queue_depth = 1,
};
/**
blk_queue_rq_timeout(sdev->request_queue, 120 * HZ);
}
spin_unlock_irqrestore(shost->host_lock, lock_flags);
- scsi_adjust_queue_depth(sdev, 0, shost->cmd_per_lun);
return 0;
}
* Return value:
* actual depth set
**/
-static int ibmvscsi_change_queue_depth(struct scsi_device *sdev, int qdepth,
- int reason)
+static int ibmvscsi_change_queue_depth(struct scsi_device *sdev, int qdepth)
{
- if (reason != SCSI_QDEPTH_DEFAULT)
- return -EOPNOTSUPP;
-
if (qdepth > IBMVSCSI_MAX_CMDS_PER_LUN)
qdepth = IBMVSCSI_MAX_CMDS_PER_LUN;
-
- scsi_adjust_queue_depth(sdev, 0, qdepth);
- return sdev->queue_depth;
+ return scsi_change_queue_depth(sdev, qdepth);
}
/* ------------------------------------------------------------
return -EIO;
}
- sglist->num_dma_sg = pci_map_sg(ioa_cfg->pdev, sglist->scatterlist,
- sglist->num_sg, DMA_TO_DEVICE);
+ sglist->num_dma_sg = dma_map_sg(&ioa_cfg->pdev->dev,
+ sglist->scatterlist, sglist->num_sg,
+ DMA_TO_DEVICE);
if (!sglist->num_dma_sg) {
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
* Return value:
* actual depth set
**/
-static int ipr_change_queue_depth(struct scsi_device *sdev, int qdepth,
- int reason)
+static int ipr_change_queue_depth(struct scsi_device *sdev, int qdepth)
{
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *)sdev->host->hostdata;
struct ipr_resource_entry *res;
unsigned long lock_flags = 0;
- if (reason != SCSI_QDEPTH_DEFAULT)
- return -EOPNOTSUPP;
-
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
res = (struct ipr_resource_entry *)sdev->hostdata;
qdepth = IPR_MAX_CMD_PER_ATA_LUN;
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
- scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
+ scsi_change_queue_depth(sdev, qdepth);
return sdev->queue_depth;
}
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
res = (struct ipr_resource_entry *)sdev->hostdata;
-
- if (res) {
- if (ipr_is_gscsi(res) && sdev->tagged_supported) {
- /*
- * We don't bother quiescing the device here since the
- * adapter firmware does it for us.
- */
- scsi_set_tag_type(sdev, tag_type);
-
- if (tag_type)
- scsi_activate_tcq(sdev, sdev->queue_depth);
- else
- scsi_deactivate_tcq(sdev, sdev->queue_depth);
- } else
- tag_type = 0;
- } else
+ if (res && ipr_is_gscsi(res))
+ tag_type = scsi_change_queue_type(sdev, tag_type);
+ else
tag_type = 0;
-
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return tag_type;
}
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
if (ap) {
- scsi_adjust_queue_depth(sdev, 0, IPR_MAX_CMD_PER_ATA_LUN);
+ scsi_change_queue_depth(sdev, IPR_MAX_CMD_PER_ATA_LUN);
ata_sas_slave_configure(sdev, ap);
- } else
- scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
+ }
+
if (ioa_cfg->sis64)
sdev_printk(KERN_INFO, sdev, "Resource path: %s\n",
ipr_format_res_path(ioa_cfg,
nseg = scsi_dma_map(scsi_cmd);
if (nseg < 0) {
if (printk_ratelimit())
- dev_err(&ioa_cfg->pdev->dev, "pci_map_sg failed!\n");
+ dev_err(&ioa_cfg->pdev->dev, "scsi_dma_map failed!\n");
return -1;
}
nseg = scsi_dma_map(scsi_cmd);
if (nseg < 0) {
- dev_err(&ioa_cfg->pdev->dev, "pci_map_sg failed!\n");
+ dev_err(&ioa_cfg->pdev->dev, "scsi_dma_map failed!\n");
return -1;
}
return 0;
}
-/**
- * ipr_get_task_attributes - Translate SPI Q-Tag to task attributes
- * @scsi_cmd: scsi command struct
- *
- * Return value:
- * task attributes
- **/
-static u8 ipr_get_task_attributes(struct scsi_cmnd *scsi_cmd)
-{
- u8 tag[2];
- u8 rc = IPR_FLAGS_LO_UNTAGGED_TASK;
-
- if (scsi_populate_tag_msg(scsi_cmd, tag)) {
- switch (tag[0]) {
- case MSG_SIMPLE_TAG:
- rc = IPR_FLAGS_LO_SIMPLE_TASK;
- break;
- case MSG_HEAD_TAG:
- rc = IPR_FLAGS_LO_HEAD_OF_Q_TASK;
- break;
- case MSG_ORDERED_TAG:
- rc = IPR_FLAGS_LO_ORDERED_TASK;
- break;
- };
- }
-
- return rc;
-}
-
/**
* ipr_erp_done - Process completion of ERP for a device
* @ipr_cmd: ipr command struct
ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_DELAY_AFTER_RST;
}
ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_ALIGNED_BFR;
- ioarcb->cmd_pkt.flags_lo |= ipr_get_task_attributes(scsi_cmd);
+ if (scsi_cmd->flags & SCMD_TAGGED)
+ ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_SIMPLE_TASK;
+ else
+ ioarcb->cmd_pkt.flags_lo |= IPR_FLAGS_LO_UNTAGGED_TASK;
}
if (scsi_cmd->cmnd[0] >= 0xC0 &&
.sdev_attrs = ipr_dev_attrs,
.proc_name = IPR_NAME,
.no_write_same = 1,
+ .use_blk_tags = 1,
};
/**
struct ipr_ioa_cfg *ioa_cfg = ipr_cmd->ioa_cfg;
struct ipr_sglist *sglist = ioa_cfg->ucode_sglist;
- pci_unmap_sg(ioa_cfg->pdev, sglist->scatterlist,
+ dma_unmap_sg(&ioa_cfg->pdev->dev, sglist->scatterlist,
sglist->num_sg, DMA_TO_DEVICE);
ipr_cmd->job_step = ipr_reset_alert;
for (i = 0; i < IPR_NUM_CMD_BLKS; i++) {
if (ioa_cfg->ipr_cmnd_list[i])
- pci_pool_free(ioa_cfg->ipr_cmd_pool,
+ dma_pool_free(ioa_cfg->ipr_cmd_pool,
ioa_cfg->ipr_cmnd_list[i],
ioa_cfg->ipr_cmnd_list_dma[i]);
}
if (ioa_cfg->ipr_cmd_pool)
- pci_pool_destroy(ioa_cfg->ipr_cmd_pool);
+ dma_pool_destroy(ioa_cfg->ipr_cmd_pool);
kfree(ioa_cfg->ipr_cmnd_list);
kfree(ioa_cfg->ipr_cmnd_list_dma);
int i;
kfree(ioa_cfg->res_entries);
- pci_free_consistent(ioa_cfg->pdev, sizeof(struct ipr_misc_cbs),
- ioa_cfg->vpd_cbs, ioa_cfg->vpd_cbs_dma);
+ dma_free_coherent(&ioa_cfg->pdev->dev, sizeof(struct ipr_misc_cbs),
+ ioa_cfg->vpd_cbs, ioa_cfg->vpd_cbs_dma);
ipr_free_cmd_blks(ioa_cfg);
for (i = 0; i < ioa_cfg->hrrq_num; i++)
- pci_free_consistent(ioa_cfg->pdev,
- sizeof(u32) * ioa_cfg->hrrq[i].size,
- ioa_cfg->hrrq[i].host_rrq,
- ioa_cfg->hrrq[i].host_rrq_dma);
+ dma_free_coherent(&ioa_cfg->pdev->dev,
+ sizeof(u32) * ioa_cfg->hrrq[i].size,
+ ioa_cfg->hrrq[i].host_rrq,
+ ioa_cfg->hrrq[i].host_rrq_dma);
- pci_free_consistent(ioa_cfg->pdev, ioa_cfg->cfg_table_size,
- ioa_cfg->u.cfg_table,
- ioa_cfg->cfg_table_dma);
+ dma_free_coherent(&ioa_cfg->pdev->dev, ioa_cfg->cfg_table_size,
+ ioa_cfg->u.cfg_table, ioa_cfg->cfg_table_dma);
for (i = 0; i < IPR_NUM_HCAMS; i++) {
- pci_free_consistent(ioa_cfg->pdev,
- sizeof(struct ipr_hostrcb),
- ioa_cfg->hostrcb[i],
- ioa_cfg->hostrcb_dma[i]);
+ dma_free_coherent(&ioa_cfg->pdev->dev,
+ sizeof(struct ipr_hostrcb),
+ ioa_cfg->hostrcb[i],
+ ioa_cfg->hostrcb_dma[i]);
}
ipr_free_dump(ioa_cfg);
dma_addr_t dma_addr;
int i, entries_each_hrrq, hrrq_id = 0;
- ioa_cfg->ipr_cmd_pool = pci_pool_create(IPR_NAME, ioa_cfg->pdev,
+ ioa_cfg->ipr_cmd_pool = dma_pool_create(IPR_NAME, &ioa_cfg->pdev->dev,
sizeof(struct ipr_cmnd), 512, 0);
if (!ioa_cfg->ipr_cmd_pool)
}
for (i = 0; i < IPR_NUM_CMD_BLKS; i++) {
- ipr_cmd = pci_pool_alloc(ioa_cfg->ipr_cmd_pool, GFP_KERNEL, &dma_addr);
+ ipr_cmd = dma_pool_alloc(ioa_cfg->ipr_cmd_pool, GFP_KERNEL, &dma_addr);
if (!ipr_cmd) {
ipr_free_cmd_blks(ioa_cfg);
ioa_cfg->res_entries[i].ioa_cfg = ioa_cfg;
}
- ioa_cfg->vpd_cbs = pci_alloc_consistent(ioa_cfg->pdev,
- sizeof(struct ipr_misc_cbs),
- &ioa_cfg->vpd_cbs_dma);
+ ioa_cfg->vpd_cbs = dma_alloc_coherent(&pdev->dev,
+ sizeof(struct ipr_misc_cbs),
+ &ioa_cfg->vpd_cbs_dma,
+ GFP_KERNEL);
if (!ioa_cfg->vpd_cbs)
goto out_free_res_entries;
goto out_free_vpd_cbs;
for (i = 0; i < ioa_cfg->hrrq_num; i++) {
- ioa_cfg->hrrq[i].host_rrq = pci_alloc_consistent(ioa_cfg->pdev,
+ ioa_cfg->hrrq[i].host_rrq = dma_alloc_coherent(&pdev->dev,
sizeof(u32) * ioa_cfg->hrrq[i].size,
- &ioa_cfg->hrrq[i].host_rrq_dma);
+ &ioa_cfg->hrrq[i].host_rrq_dma,
+ GFP_KERNEL);
if (!ioa_cfg->hrrq[i].host_rrq) {
while (--i > 0)
- pci_free_consistent(pdev,
+ dma_free_coherent(&pdev->dev,
sizeof(u32) * ioa_cfg->hrrq[i].size,
ioa_cfg->hrrq[i].host_rrq,
ioa_cfg->hrrq[i].host_rrq_dma);
ioa_cfg->hrrq[i].ioa_cfg = ioa_cfg;
}
- ioa_cfg->u.cfg_table = pci_alloc_consistent(ioa_cfg->pdev,
- ioa_cfg->cfg_table_size,
- &ioa_cfg->cfg_table_dma);
+ ioa_cfg->u.cfg_table = dma_alloc_coherent(&pdev->dev,
+ ioa_cfg->cfg_table_size,
+ &ioa_cfg->cfg_table_dma,
+ GFP_KERNEL);
if (!ioa_cfg->u.cfg_table)
goto out_free_host_rrq;
for (i = 0; i < IPR_NUM_HCAMS; i++) {
- ioa_cfg->hostrcb[i] = pci_alloc_consistent(ioa_cfg->pdev,
- sizeof(struct ipr_hostrcb),
- &ioa_cfg->hostrcb_dma[i]);
+ ioa_cfg->hostrcb[i] = dma_alloc_coherent(&pdev->dev,
+ sizeof(struct ipr_hostrcb),
+ &ioa_cfg->hostrcb_dma[i],
+ GFP_KERNEL);
if (!ioa_cfg->hostrcb[i])
goto out_free_hostrcb_dma;
out_free_hostrcb_dma:
while (i-- > 0) {
- pci_free_consistent(pdev, sizeof(struct ipr_hostrcb),
- ioa_cfg->hostrcb[i],
- ioa_cfg->hostrcb_dma[i]);
+ dma_free_coherent(&pdev->dev, sizeof(struct ipr_hostrcb),
+ ioa_cfg->hostrcb[i],
+ ioa_cfg->hostrcb_dma[i]);
}
- pci_free_consistent(pdev, ioa_cfg->cfg_table_size,
- ioa_cfg->u.cfg_table,
- ioa_cfg->cfg_table_dma);
+ dma_free_coherent(&pdev->dev, ioa_cfg->cfg_table_size,
+ ioa_cfg->u.cfg_table, ioa_cfg->cfg_table_dma);
out_free_host_rrq:
for (i = 0; i < ioa_cfg->hrrq_num; i++) {
- pci_free_consistent(pdev,
- sizeof(u32) * ioa_cfg->hrrq[i].size,
- ioa_cfg->hrrq[i].host_rrq,
- ioa_cfg->hrrq[i].host_rrq_dma);
+ dma_free_coherent(&pdev->dev,
+ sizeof(u32) * ioa_cfg->hrrq[i].size,
+ ioa_cfg->hrrq[i].host_rrq,
+ ioa_cfg->hrrq[i].host_rrq_dma);
}
out_ipr_free_cmd_blocks:
ipr_free_cmd_blks(ioa_cfg);
out_free_vpd_cbs:
- pci_free_consistent(pdev, sizeof(struct ipr_misc_cbs),
- ioa_cfg->vpd_cbs, ioa_cfg->vpd_cbs_dma);
+ dma_free_coherent(&pdev->dev, sizeof(struct ipr_misc_cbs),
+ ioa_cfg->vpd_cbs, ioa_cfg->vpd_cbs_dma);
out_free_res_entries:
kfree(ioa_cfg->res_entries);
goto out;
ipr_init_regs(ioa_cfg);
if (ioa_cfg->sis64) {
- rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(64));
+ rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
if (rc < 0) {
- dev_dbg(&pdev->dev, "Failed to set 64 bit PCI DMA mask\n");
- rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ dev_dbg(&pdev->dev, "Failed to set 64 bit DMA mask\n");
+ rc = dma_set_mask_and_coherent(&pdev->dev,
+ DMA_BIT_MASK(32));
}
} else
- rc = pci_set_dma_mask(pdev, DMA_BIT_MASK(32));
+ rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
if (rc < 0) {
- dev_err(&pdev->dev, "Failed to set PCI DMA mask\n");
+ dev_err(&pdev->dev, "Failed to set DMA mask\n");
goto cleanup_nomem;
}
struct ipr_misc_cbs *vpd_cbs;
dma_addr_t vpd_cbs_dma;
- struct pci_pool *ipr_cmd_pool;
+ struct dma_pool *ipr_cmd_pool;
struct ipr_cmnd *reset_cmd;
int (*reset) (struct ipr_cmnd *);
min = ha->max_cmds / 2;
if (ha->enq->ucLogDriveCount <= 2)
min = ha->max_cmds - 1;
- scsi_adjust_queue_depth(SDptr, MSG_ORDERED_TAG, min);
+ scsi_change_queue_depth(SDptr, min);
}
SDptr->skip_ms_page_8 = 1;
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
.shost_attrs = isci_host_attrs,
+ .use_blk_tags = 1,
+ .track_queue_depth = 1,
};
static struct sas_domain_function_template isci_transport_ops = {
sas_ha->sas_port = sas_ports;
sas_ha->num_phys = SCI_MAX_PHYS;
- sas_ha->lldd_queue_size = ISCI_CAN_QUEUE_VAL;
- sas_ha->lldd_max_execute_num = 1;
sas_ha->strict_wide_ports = 1;
sas_register_ha(sas_ha);
* functions. This function is called by libsas to send a task down to
* hardware.
* @task: This parameter specifies the SAS task to send.
- * @num: This parameter specifies the number of tasks to queue.
* @gfp_flags: This parameter specifies the context of this call.
*
* status, zero indicates success.
*/
-int isci_task_execute_task(struct sas_task *task, int num, gfp_t gfp_flags)
+int isci_task_execute_task(struct sas_task *task, gfp_t gfp_flags)
{
struct isci_host *ihost = dev_to_ihost(task->dev);
struct isci_remote_device *idev;
unsigned long flags;
+ enum sci_status status = SCI_FAILURE;
bool io_ready;
u16 tag;
- dev_dbg(&ihost->pdev->dev, "%s: num=%d\n", __func__, num);
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+ idev = isci_lookup_device(task->dev);
+ io_ready = isci_device_io_ready(idev, task);
+ tag = isci_alloc_tag(ihost);
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
- for_each_sas_task(num, task) {
- enum sci_status status = SCI_FAILURE;
+ dev_dbg(&ihost->pdev->dev,
+ "task: %p, dev: %p idev: %p:%#lx cmd = %p\n",
+ task, task->dev, idev, idev ? idev->flags : 0,
+ task->uldd_task);
- spin_lock_irqsave(&ihost->scic_lock, flags);
- idev = isci_lookup_device(task->dev);
- io_ready = isci_device_io_ready(idev, task);
- tag = isci_alloc_tag(ihost);
- spin_unlock_irqrestore(&ihost->scic_lock, flags);
+ if (!idev) {
+ isci_task_refuse(ihost, task, SAS_TASK_UNDELIVERED,
+ SAS_DEVICE_UNKNOWN);
+ } else if (!io_ready || tag == SCI_CONTROLLER_INVALID_IO_TAG) {
+ /* Indicate QUEUE_FULL so that the scsi midlayer
+ * retries.
+ */
+ isci_task_refuse(ihost, task, SAS_TASK_COMPLETE,
+ SAS_QUEUE_FULL);
+ } else {
+ /* There is a device and it's ready for I/O. */
+ spin_lock_irqsave(&task->task_state_lock, flags);
- dev_dbg(&ihost->pdev->dev,
- "task: %p, num: %d dev: %p idev: %p:%#lx cmd = %p\n",
- task, num, task->dev, idev, idev ? idev->flags : 0,
- task->uldd_task);
-
- if (!idev) {
- isci_task_refuse(ihost, task, SAS_TASK_UNDELIVERED,
- SAS_DEVICE_UNKNOWN);
- } else if (!io_ready || tag == SCI_CONTROLLER_INVALID_IO_TAG) {
- /* Indicate QUEUE_FULL so that the scsi midlayer
- * retries.
- */
- isci_task_refuse(ihost, task, SAS_TASK_COMPLETE,
- SAS_QUEUE_FULL);
+ if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
+ /* The I/O was aborted. */
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ isci_task_refuse(ihost, task,
+ SAS_TASK_UNDELIVERED,
+ SAM_STAT_TASK_ABORTED);
} else {
- /* There is a device and it's ready for I/O. */
- spin_lock_irqsave(&task->task_state_lock, flags);
-
- if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
- /* The I/O was aborted. */
- spin_unlock_irqrestore(&task->task_state_lock,
- flags);
-
- isci_task_refuse(ihost, task,
- SAS_TASK_UNDELIVERED,
- SAM_STAT_TASK_ABORTED);
- } else {
- task->task_state_flags |= SAS_TASK_AT_INITIATOR;
+ task->task_state_flags |= SAS_TASK_AT_INITIATOR;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ /* build and send the request. */
+ status = isci_request_execute(ihost, idev, task, tag);
+
+ if (status != SCI_SUCCESS) {
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ /* Did not really start this command. */
+ task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
spin_unlock_irqrestore(&task->task_state_lock, flags);
- /* build and send the request. */
- status = isci_request_execute(ihost, idev, task, tag);
-
- if (status != SCI_SUCCESS) {
-
- spin_lock_irqsave(&task->task_state_lock, flags);
- /* Did not really start this command. */
- task->task_state_flags &= ~SAS_TASK_AT_INITIATOR;
- spin_unlock_irqrestore(&task->task_state_lock, flags);
-
- if (test_bit(IDEV_GONE, &idev->flags)) {
-
- /* Indicate that the device
- * is gone.
- */
- isci_task_refuse(ihost, task,
- SAS_TASK_UNDELIVERED,
- SAS_DEVICE_UNKNOWN);
- } else {
- /* Indicate QUEUE_FULL so that
- * the scsi midlayer retries.
- * If the request failed for
- * remote device reasons, it
- * gets returned as
- * SAS_TASK_UNDELIVERED next
- * time through.
- */
- isci_task_refuse(ihost, task,
- SAS_TASK_COMPLETE,
- SAS_QUEUE_FULL);
- }
+ if (test_bit(IDEV_GONE, &idev->flags)) {
+ /* Indicate that the device
+ * is gone.
+ */
+ isci_task_refuse(ihost, task,
+ SAS_TASK_UNDELIVERED,
+ SAS_DEVICE_UNKNOWN);
+ } else {
+ /* Indicate QUEUE_FULL so that
+ * the scsi midlayer retries.
+ * If the request failed for
+ * remote device reasons, it
+ * gets returned as
+ * SAS_TASK_UNDELIVERED next
+ * time through.
+ */
+ isci_task_refuse(ihost, task,
+ SAS_TASK_COMPLETE,
+ SAS_QUEUE_FULL);
}
}
}
- if (status != SCI_SUCCESS && tag != SCI_CONTROLLER_INVALID_IO_TAG) {
- spin_lock_irqsave(&ihost->scic_lock, flags);
- /* command never hit the device, so just free
- * the tci and skip the sequence increment
- */
- isci_tci_free(ihost, ISCI_TAG_TCI(tag));
- spin_unlock_irqrestore(&ihost->scic_lock, flags);
- }
- isci_put_device(idev);
}
+
+ if (status != SCI_SUCCESS && tag != SCI_CONTROLLER_INVALID_IO_TAG) {
+ spin_lock_irqsave(&ihost->scic_lock, flags);
+ /* command never hit the device, so just free
+ * the tci and skip the sequence increment
+ */
+ isci_tci_free(ihost, ISCI_TAG_TCI(tag));
+ spin_unlock_irqrestore(&ihost->scic_lock, flags);
+ }
+
+ isci_put_device(idev);
return 0;
}
int isci_task_execute_task(
struct sas_task *task,
- int num,
gfp_t gfp_flags);
int isci_task_abort_task(
.module = THIS_MODULE,
.name = "iSCSI Initiator over TCP/IP",
.queuecommand = iscsi_queuecommand,
- .change_queue_depth = iscsi_change_queue_depth,
+ .change_queue_depth = scsi_change_queue_depth,
.can_queue = ISCSI_DEF_XMIT_CMDS_MAX - 1,
.sg_tablesize = 4096,
.max_sectors = 0xFFFF,
.target_alloc = iscsi_target_alloc,
.proc_name = "iscsi_tcp",
.this_id = -1,
+ .track_queue_depth = 1,
};
static struct iscsi_transport iscsi_sw_tcp_transport = {
if (!rport || fc_remote_port_chkready(rport))
return -ENXIO;
- if (sdev->tagged_supported)
- scsi_activate_tcq(sdev, FC_FCP_DFLT_QUEUE_DEPTH);
- else
- scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev),
- FC_FCP_DFLT_QUEUE_DEPTH);
-
+ scsi_change_queue_depth(sdev, FC_FCP_DFLT_QUEUE_DEPTH);
return 0;
}
EXPORT_SYMBOL(fc_slave_alloc);
-/**
- * fc_change_queue_depth() - Change a device's queue depth
- * @sdev: The SCSI device whose queue depth is to change
- * @qdepth: The new queue depth
- * @reason: The resason for the change
- */
-int fc_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
-{
- switch (reason) {
- case SCSI_QDEPTH_DEFAULT:
- scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
- break;
- case SCSI_QDEPTH_QFULL:
- scsi_track_queue_full(sdev, qdepth);
- break;
- case SCSI_QDEPTH_RAMP_UP:
- scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
- break;
- default:
- return -EOPNOTSUPP;
- }
- return sdev->queue_depth;
-}
-EXPORT_SYMBOL(fc_change_queue_depth);
-
-/**
- * fc_change_queue_type() - Change a device's queue type
- * @sdev: The SCSI device whose queue depth is to change
- * @tag_type: Identifier for queue type
- */
-int fc_change_queue_type(struct scsi_device *sdev, int tag_type)
-{
- if (sdev->tagged_supported) {
- scsi_set_tag_type(sdev, tag_type);
- if (tag_type)
- scsi_activate_tcq(sdev, sdev->queue_depth);
- else
- scsi_deactivate_tcq(sdev, sdev->queue_depth);
- } else
- tag_type = 0;
-
- return tag_type;
-}
-EXPORT_SYMBOL(fc_change_queue_type);
-
/**
* fc_fcp_destory() - Tear down the FCP layer for a given local port
* @lport: The local port that no longer needs the FCP layer
}
EXPORT_SYMBOL_GPL(iscsi_queuecommand);
-int iscsi_change_queue_depth(struct scsi_device *sdev, int depth, int reason)
-{
- switch (reason) {
- case SCSI_QDEPTH_DEFAULT:
- scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
- break;
- case SCSI_QDEPTH_QFULL:
- scsi_track_queue_full(sdev, depth);
- break;
- case SCSI_QDEPTH_RAMP_UP:
- scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
- break;
- default:
- return -EOPNOTSUPP;
- }
- return sdev->queue_depth;
-}
-EXPORT_SYMBOL_GPL(iscsi_change_queue_depth);
-
int iscsi_target_alloc(struct scsi_target *starget)
{
struct iscsi_cls_session *cls_session = starget_to_session(starget);
spin_unlock_irqrestore(ap->lock, flags);
qc_already_gone:
- list_del_init(&task->list);
sas_free_task(task);
}
if (qc->scsicmd)
ASSIGN_SAS_TASK(qc->scsicmd, task);
- if (sas_ha->lldd_max_execute_num < 2)
- ret = i->dft->lldd_execute_task(task, 1, GFP_ATOMIC);
- else
- ret = sas_queue_up(task);
-
- /* Examine */
+ ret = i->dft->lldd_execute_task(task, GFP_ATOMIC);
if (ret) {
SAS_DPRINTK("lldd_execute_task returned: %d\n", ret);
return;
out:
- list_del_init(&task->list);
sas_free_task(task);
}
task->slow_task->timer.expires = jiffies + SMP_TIMEOUT*HZ;
add_timer(&task->slow_task->timer);
- res = i->dft->lldd_execute_task(task, 1, GFP_KERNEL);
+ res = i->dft->lldd_execute_task(task, GFP_KERNEL);
if (res) {
del_timer(&task->slow_task->timer);
struct sas_task *task = kmem_cache_zalloc(sas_task_cache, flags);
if (task) {
- INIT_LIST_HEAD(&task->list);
spin_lock_init(&task->task_state_lock);
task->task_state_flags = SAS_TASK_STATE_PENDING;
}
void sas_free_task(struct sas_task *task)
{
if (task) {
- BUG_ON(!list_empty(&task->list));
kfree(task->slow_task);
kmem_cache_free(sas_task_cache, task);
}
spin_lock_init(&sas_ha->phy_port_lock);
sas_hash_addr(sas_ha->hashed_sas_addr, sas_ha->sas_addr);
- if (sas_ha->lldd_queue_size == 0)
- sas_ha->lldd_queue_size = 1;
- else if (sas_ha->lldd_queue_size == -1)
- sas_ha->lldd_queue_size = 128; /* Sanity */
-
set_bit(SAS_HA_REGISTERED, &sas_ha->state);
spin_lock_init(&sas_ha->lock);
mutex_init(&sas_ha->drain_mutex);
goto Undo_ports;
}
- if (sas_ha->lldd_max_execute_num > 1) {
- error = sas_init_queue(sas_ha);
- if (error) {
- printk(KERN_NOTICE "couldn't start queue thread:%d, "
- "running in direct mode\n", error);
- sas_ha->lldd_max_execute_num = 1;
- }
- }
-
INIT_LIST_HEAD(&sas_ha->eh_done_q);
INIT_LIST_HEAD(&sas_ha->eh_ata_q);
__sas_drain_work(sas_ha);
mutex_unlock(&sas_ha->drain_mutex);
- if (sas_ha->lldd_max_execute_num > 1) {
- sas_shutdown_queue(sas_ha);
- sas_ha->lldd_max_execute_num = 1;
- }
-
return 0;
}
enum blk_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *);
-int sas_init_queue(struct sas_ha_struct *sas_ha);
int sas_init_events(struct sas_ha_struct *sas_ha);
-void sas_shutdown_queue(struct sas_ha_struct *sas_ha);
void sas_disable_revalidation(struct sas_ha_struct *ha);
void sas_enable_revalidation(struct sas_ha_struct *ha);
void __sas_drain_work(struct sas_ha_struct *ha);
sc->result = (hs << 16) | stat;
ASSIGN_SAS_TASK(sc, NULL);
- list_del_init(&task->list);
sas_free_task(task);
}
if (unlikely(!sc)) {
SAS_DPRINTK("task_done called with non existing SCSI cmnd!\n");
- list_del_init(&task->list);
sas_free_task(task);
return;
}
return task;
}
-int sas_queue_up(struct sas_task *task)
-{
- struct sas_ha_struct *sas_ha = task->dev->port->ha;
- struct scsi_core *core = &sas_ha->core;
- unsigned long flags;
- LIST_HEAD(list);
-
- spin_lock_irqsave(&core->task_queue_lock, flags);
- if (sas_ha->lldd_queue_size < core->task_queue_size + 1) {
- spin_unlock_irqrestore(&core->task_queue_lock, flags);
- return -SAS_QUEUE_FULL;
- }
- list_add_tail(&task->list, &core->task_queue);
- core->task_queue_size += 1;
- spin_unlock_irqrestore(&core->task_queue_lock, flags);
- wake_up_process(core->queue_thread);
-
- return 0;
-}
-
int sas_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd)
{
struct sas_internal *i = to_sas_internal(host->transportt);
struct domain_device *dev = cmd_to_domain_dev(cmd);
- struct sas_ha_struct *sas_ha = dev->port->ha;
struct sas_task *task;
int res = 0;
if (!task)
return SCSI_MLQUEUE_HOST_BUSY;
- /* Queue up, Direct Mode or Task Collector Mode. */
- if (sas_ha->lldd_max_execute_num < 2)
- res = i->dft->lldd_execute_task(task, 1, GFP_ATOMIC);
- else
- res = sas_queue_up(task);
-
+ res = i->dft->lldd_execute_task(task, GFP_ATOMIC);
if (res)
goto out_free_task;
return 0;
TASK_IS_DONE,
TASK_IS_ABORTED,
TASK_IS_AT_LU,
- TASK_IS_NOT_AT_HA,
TASK_IS_NOT_AT_LU,
TASK_ABORT_FAILED,
};
static enum task_disposition sas_scsi_find_task(struct sas_task *task)
{
- struct sas_ha_struct *ha = task->dev->port->ha;
unsigned long flags;
int i, res;
struct sas_internal *si =
to_sas_internal(task->dev->port->ha->core.shost->transportt);
- if (ha->lldd_max_execute_num > 1) {
- struct scsi_core *core = &ha->core;
- struct sas_task *t, *n;
-
- mutex_lock(&core->task_queue_flush);
- spin_lock_irqsave(&core->task_queue_lock, flags);
- list_for_each_entry_safe(t, n, &core->task_queue, list)
- if (task == t) {
- list_del_init(&t->list);
- break;
- }
- spin_unlock_irqrestore(&core->task_queue_lock, flags);
- mutex_unlock(&core->task_queue_flush);
-
- if (task == t)
- return TASK_IS_NOT_AT_HA;
- }
-
for (i = 0; i < 5; i++) {
SAS_DPRINTK("%s: aborting task 0x%p\n", __func__, task);
res = si->dft->lldd_abort_task(task);
cmd->eh_eflags = 0;
switch (res) {
- case TASK_IS_NOT_AT_HA:
- SAS_DPRINTK("%s: task 0x%p is not at ha: %s\n",
- __func__, task,
- cmd->retries ? "retry" : "aborted");
- if (cmd->retries)
- cmd->retries--;
- sas_eh_finish_cmd(cmd);
- continue;
case TASK_IS_DONE:
SAS_DPRINTK("%s: task 0x%p is done\n", __func__,
task);
scsi_eh_ready_devs(shost, &eh_work_q, &ha->eh_done_q);
out:
- if (ha->lldd_max_execute_num > 1)
- wake_up_process(ha->core.queue_thread);
-
sas_eh_handle_resets(shost);
/* now link into libata eh --- if we have any ata devices */
sas_read_port_mode_page(scsi_dev);
if (scsi_dev->tagged_supported) {
- scsi_set_tag_type(scsi_dev, MSG_SIMPLE_TAG);
- scsi_activate_tcq(scsi_dev, SAS_DEF_QD);
+ scsi_change_queue_depth(scsi_dev, SAS_DEF_QD);
} else {
SAS_DPRINTK("device %llx, LUN %llx doesn't support "
"TCQ\n", SAS_ADDR(dev->sas_addr),
scsi_dev->lun);
- scsi_dev->tagged_supported = 0;
- scsi_set_tag_type(scsi_dev, 0);
- scsi_deactivate_tcq(scsi_dev, 1);
+ scsi_change_queue_depth(scsi_dev, 1);
}
scsi_dev->allow_restart = 1;
return 0;
}
-int sas_change_queue_depth(struct scsi_device *sdev, int depth, int reason)
+int sas_change_queue_depth(struct scsi_device *sdev, int depth)
{
struct domain_device *dev = sdev_to_domain_dev(sdev);
if (dev_is_sata(dev))
- return __ata_change_queue_depth(dev->sata_dev.ap, sdev, depth,
- reason);
-
- switch (reason) {
- case SCSI_QDEPTH_DEFAULT:
- case SCSI_QDEPTH_RAMP_UP:
- if (!sdev->tagged_supported)
- depth = 1;
- scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
- break;
- case SCSI_QDEPTH_QFULL:
- scsi_track_queue_full(sdev, depth);
- break;
- default:
- return -EOPNOTSUPP;
- }
+ return __ata_change_queue_depth(dev->sata_dev.ap, sdev, depth);
- return depth;
+ if (!sdev->tagged_supported)
+ depth = 1;
+ return scsi_change_queue_depth(sdev, depth);
}
-int sas_change_queue_type(struct scsi_device *scsi_dev, int qt)
+int sas_change_queue_type(struct scsi_device *scsi_dev, int type)
{
- struct domain_device *dev = sdev_to_domain_dev(scsi_dev);
-
- if (dev_is_sata(dev))
+ if (dev_is_sata(sdev_to_domain_dev(scsi_dev)))
return -EINVAL;
-
- if (!scsi_dev->tagged_supported)
- return 0;
-
- scsi_deactivate_tcq(scsi_dev, 1);
-
- scsi_set_tag_type(scsi_dev, qt);
- scsi_activate_tcq(scsi_dev, scsi_dev->queue_depth);
-
- return qt;
+ return scsi_change_queue_type(scsi_dev, type);
}
int sas_bios_param(struct scsi_device *scsi_dev,
return 0;
}
-/* ---------- Task Collector Thread implementation ---------- */
-
-static void sas_queue(struct sas_ha_struct *sas_ha)
-{
- struct scsi_core *core = &sas_ha->core;
- unsigned long flags;
- LIST_HEAD(q);
- int can_queue;
- int res;
- struct sas_internal *i = to_sas_internal(core->shost->transportt);
-
- mutex_lock(&core->task_queue_flush);
- spin_lock_irqsave(&core->task_queue_lock, flags);
- while (!kthread_should_stop() &&
- !list_empty(&core->task_queue) &&
- !test_bit(SAS_HA_FROZEN, &sas_ha->state)) {
-
- can_queue = sas_ha->lldd_queue_size - core->task_queue_size;
- if (can_queue >= 0) {
- can_queue = core->task_queue_size;
- list_splice_init(&core->task_queue, &q);
- } else {
- struct list_head *a, *n;
-
- can_queue = sas_ha->lldd_queue_size;
- list_for_each_safe(a, n, &core->task_queue) {
- list_move_tail(a, &q);
- if (--can_queue == 0)
- break;
- }
- can_queue = sas_ha->lldd_queue_size;
- }
- core->task_queue_size -= can_queue;
- spin_unlock_irqrestore(&core->task_queue_lock, flags);
- {
- struct sas_task *task = list_entry(q.next,
- struct sas_task,
- list);
- list_del_init(&q);
- res = i->dft->lldd_execute_task(task, can_queue,
- GFP_KERNEL);
- if (unlikely(res))
- __list_add(&q, task->list.prev, &task->list);
- }
- spin_lock_irqsave(&core->task_queue_lock, flags);
- if (res) {
- list_splice_init(&q, &core->task_queue); /*at head*/
- core->task_queue_size += can_queue;
- }
- }
- spin_unlock_irqrestore(&core->task_queue_lock, flags);
- mutex_unlock(&core->task_queue_flush);
-}
-
-/**
- * sas_queue_thread -- The Task Collector thread
- * @_sas_ha: pointer to struct sas_ha
- */
-static int sas_queue_thread(void *_sas_ha)
-{
- struct sas_ha_struct *sas_ha = _sas_ha;
-
- while (1) {
- set_current_state(TASK_INTERRUPTIBLE);
- schedule();
- sas_queue(sas_ha);
- if (kthread_should_stop())
- break;
- }
-
- return 0;
-}
-
-int sas_init_queue(struct sas_ha_struct *sas_ha)
-{
- struct scsi_core *core = &sas_ha->core;
-
- spin_lock_init(&core->task_queue_lock);
- mutex_init(&core->task_queue_flush);
- core->task_queue_size = 0;
- INIT_LIST_HEAD(&core->task_queue);
-
- core->queue_thread = kthread_run(sas_queue_thread, sas_ha,
- "sas_queue_%d", core->shost->host_no);
- if (IS_ERR(core->queue_thread))
- return PTR_ERR(core->queue_thread);
- return 0;
-}
-
-void sas_shutdown_queue(struct sas_ha_struct *sas_ha)
-{
- unsigned long flags;
- struct scsi_core *core = &sas_ha->core;
- struct sas_task *task, *n;
-
- kthread_stop(core->queue_thread);
-
- if (!list_empty(&core->task_queue))
- SAS_DPRINTK("HA: %llx: scsi core task queue is NOT empty!?\n",
- SAS_ADDR(sas_ha->sas_addr));
-
- spin_lock_irqsave(&core->task_queue_lock, flags);
- list_for_each_entry_safe(task, n, &core->task_queue, list) {
- struct scsi_cmnd *cmd = task->uldd_task;
-
- list_del_init(&task->list);
-
- ASSIGN_SAS_TASK(cmd, NULL);
- sas_free_task(task);
- cmd->result = DID_ABORT << 16;
- cmd->scsi_done(cmd);
- }
- spin_unlock_irqrestore(&core->task_queue_lock, flags);
-}
-
/*
* Tell an upper layer that it needs to initiate an abort for a given task.
* This should only ever be called by an LLDD.
spin_unlock_irqrestore(shost->host_lock, flags);
}
-/**
- * lpfc_send_sdev_queuedepth_change_event - Posts a queuedepth change event
- * @phba: Pointer to HBA context object.
- * @vport: Pointer to vport object.
- * @ndlp: Pointer to FC node associated with the target.
- * @lun: Lun number of the scsi device.
- * @old_val: Old value of the queue depth.
- * @new_val: New value of the queue depth.
- *
- * This function sends an event to the mgmt application indicating
- * there is a change in the scsi device queue depth.
- **/
-static void
-lpfc_send_sdev_queuedepth_change_event(struct lpfc_hba *phba,
- struct lpfc_vport *vport,
- struct lpfc_nodelist *ndlp,
- uint64_t lun,
- uint32_t old_val,
- uint32_t new_val)
-{
- struct lpfc_fast_path_event *fast_path_evt;
- unsigned long flags;
-
- fast_path_evt = lpfc_alloc_fast_evt(phba);
- if (!fast_path_evt)
- return;
-
- fast_path_evt->un.queue_depth_evt.scsi_event.event_type =
- FC_REG_SCSI_EVENT;
- fast_path_evt->un.queue_depth_evt.scsi_event.subcategory =
- LPFC_EVENT_VARQUEDEPTH;
-
- /* Report all luns with change in queue depth */
- fast_path_evt->un.queue_depth_evt.scsi_event.lun = lun;
- if (ndlp && NLP_CHK_NODE_ACT(ndlp)) {
- memcpy(&fast_path_evt->un.queue_depth_evt.scsi_event.wwpn,
- &ndlp->nlp_portname, sizeof(struct lpfc_name));
- memcpy(&fast_path_evt->un.queue_depth_evt.scsi_event.wwnn,
- &ndlp->nlp_nodename, sizeof(struct lpfc_name));
- }
-
- fast_path_evt->un.queue_depth_evt.oldval = old_val;
- fast_path_evt->un.queue_depth_evt.newval = new_val;
- fast_path_evt->vport = vport;
-
- fast_path_evt->work_evt.evt = LPFC_EVT_FASTPATH_MGMT_EVT;
- spin_lock_irqsave(&phba->hbalock, flags);
- list_add_tail(&fast_path_evt->work_evt.evt_listp, &phba->work_list);
- spin_unlock_irqrestore(&phba->hbalock, flags);
- lpfc_worker_wake_up(phba);
-
- return;
-}
-
-/**
- * lpfc_change_queue_depth - Alter scsi device queue depth
- * @sdev: Pointer the scsi device on which to change the queue depth.
- * @qdepth: New queue depth to set the sdev to.
- * @reason: The reason for the queue depth change.
- *
- * This function is called by the midlayer and the LLD to alter the queue
- * depth for a scsi device. This function sets the queue depth to the new
- * value and sends an event out to log the queue depth change.
- **/
-static int
-lpfc_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
-{
- struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
- struct lpfc_hba *phba = vport->phba;
- struct lpfc_rport_data *rdata;
- unsigned long new_queue_depth, old_queue_depth;
-
- old_queue_depth = sdev->queue_depth;
-
- switch (reason) {
- case SCSI_QDEPTH_DEFAULT:
- /* change request from sysfs, fall through */
- case SCSI_QDEPTH_RAMP_UP:
- scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
- break;
- case SCSI_QDEPTH_QFULL:
- if (scsi_track_queue_full(sdev, qdepth) == 0)
- return sdev->queue_depth;
-
- lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
- "0711 detected queue full - lun queue "
- "depth adjusted to %d.\n", sdev->queue_depth);
- break;
- default:
- return -EOPNOTSUPP;
- }
-
- new_queue_depth = sdev->queue_depth;
- rdata = lpfc_rport_data_from_scsi_device(sdev);
- if (rdata)
- lpfc_send_sdev_queuedepth_change_event(phba, vport,
- rdata->pnode, sdev->lun,
- old_queue_depth,
- new_queue_depth);
- return sdev->queue_depth;
-}
-
-/**
- * lpfc_change_queue_type() - Change a device's scsi tag queuing type
- * @sdev: Pointer the scsi device whose queue depth is to change
- * @tag_type: Identifier for queue tag type
- */
-static int
-lpfc_change_queue_type(struct scsi_device *sdev, int tag_type)
-{
- if (sdev->tagged_supported) {
- scsi_set_tag_type(sdev, tag_type);
- if (tag_type)
- scsi_activate_tcq(sdev, sdev->queue_depth);
- else
- scsi_deactivate_tcq(sdev, sdev->queue_depth);
- } else
- tag_type = 0;
-
- return tag_type;
-}
-
/**
* lpfc_rampdown_queue_depth - Post RAMP_DOWN_QUEUE event to worker thread
* @phba: The Hba for which this call is being executed.
else
new_queue_depth = sdev->queue_depth -
new_queue_depth;
- lpfc_change_queue_depth(sdev, new_queue_depth,
- SCSI_QDEPTH_DEFAULT);
+ scsi_change_queue_depth(sdev, new_queue_depth);
}
}
lpfc_destroy_vport_work_array(phba, vports);
IOCB_t *iocb_cmd = &lpfc_cmd->cur_iocbq.iocb;
struct lpfc_iocbq *piocbq = &(lpfc_cmd->cur_iocbq);
int datadir = scsi_cmnd->sc_data_direction;
- char tag[2];
uint8_t *ptr;
bool sli4;
uint32_t fcpdl;
memset(ptr, 0, (LPFC_FCP_CDB_LEN - scsi_cmnd->cmd_len));
}
- if (scsi_populate_tag_msg(scsi_cmnd, tag)) {
- switch (tag[0]) {
- case HEAD_OF_QUEUE_TAG:
- fcp_cmnd->fcpCntl1 = HEAD_OF_Q;
- break;
- case ORDERED_QUEUE_TAG:
- fcp_cmnd->fcpCntl1 = ORDERED_Q;
- break;
- default:
- fcp_cmnd->fcpCntl1 = SIMPLE_Q;
- break;
- }
- } else
- fcp_cmnd->fcpCntl1 = SIMPLE_Q;
+ fcp_cmnd->fcpCntl1 = SIMPLE_Q;
sli4 = (phba->sli_rev == LPFC_SLI_REV4);
piocbq->iocb.un.fcpi.fcpi_XRdy = 0;
struct lpfc_vport *vport = (struct lpfc_vport *) sdev->host->hostdata;
struct lpfc_hba *phba = vport->phba;
- if (sdev->tagged_supported)
- scsi_activate_tcq(sdev, vport->cfg_lun_queue_depth);
- else
- scsi_deactivate_tcq(sdev, vport->cfg_lun_queue_depth);
+ scsi_change_queue_depth(sdev, vport->cfg_lun_queue_depth);
if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
lpfc_sli_handle_fast_ring_event(phba,
.shost_attrs = lpfc_hba_attrs,
.max_sectors = 0xFFFF,
.vendor_id = LPFC_NL_VENDOR_ID,
- .change_queue_depth = lpfc_change_queue_depth,
- .change_queue_type = lpfc_change_queue_type,
+ .change_queue_depth = scsi_change_queue_depth,
+ .change_queue_type = scsi_change_queue_type,
+ .use_blk_tags = 1,
+ .track_queue_depth = 1,
};
struct scsi_host_template lpfc_vport_template = {
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = lpfc_vport_attrs,
.max_sectors = 0xFFFF,
- .change_queue_depth = lpfc_change_queue_depth,
- .change_queue_type = lpfc_change_queue_type,
+ .change_queue_depth = scsi_change_queue_depth,
+ .change_queue_type = scsi_change_queue_type,
+ .use_blk_tags = 1,
+ .track_queue_depth = 1,
};
* Generic Generic NCR5380 driver
*
* Copyright 1995, Russell King
- *
- * ALPHA RELEASE 1.
- *
- * For more information, please consult
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
*/
#include <linux/types.h>
-#include <linux/stddef.h>
-#include <linux/ctype.h>
#include <linux/delay.h>
-
#include <linux/module.h>
-#include <linux/signal.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <asm/hwtest.h>
#include <asm/io.h>
-#include <asm/irq.h>
-
-#include <asm/macintosh.h>
#include <asm/macints.h>
-#include <asm/mac_via.h>
+#include <asm/setup.h>
-#include "scsi.h"
#include <scsi/scsi_host.h>
-#include "mac_scsi.h"
-/* These control the behaviour of the generic 5380 core */
-#define AUTOSENSE
+/* Definitions for the core NCR5380 driver. */
+
#define PSEUDO_DMA
-#include "NCR5380.h"
+#define NCR5380_implementation_fields unsigned char *pdma_base
+#define NCR5380_local_declare() struct Scsi_Host *_instance
+#define NCR5380_setup(instance) _instance = instance
-#define RESET_BOOT
-#define DRIVER_SETUP
+#define NCR5380_read(reg) macscsi_read(_instance, reg)
+#define NCR5380_write(reg, value) macscsi_write(_instance, reg, value)
-extern void via_scsi_clear(void);
+#define NCR5380_pread macscsi_pread
+#define NCR5380_pwrite macscsi_pwrite
-#ifdef RESET_BOOT
-static void mac_scsi_reset_boot(struct Scsi_Host *instance);
-#endif
+#define NCR5380_intr macscsi_intr
+#define NCR5380_queue_command macscsi_queue_command
+#define NCR5380_abort macscsi_abort
+#define NCR5380_bus_reset macscsi_bus_reset
+#define NCR5380_info macscsi_info
+#define NCR5380_show_info macscsi_show_info
+#define NCR5380_write_info macscsi_write_info
+
+#include "NCR5380.h"
+
+#define RESET_BOOT
-static int setup_called = 0;
static int setup_can_queue = -1;
+module_param(setup_can_queue, int, 0);
static int setup_cmd_per_lun = -1;
+module_param(setup_cmd_per_lun, int, 0);
static int setup_sg_tablesize = -1;
+module_param(setup_sg_tablesize, int, 0);
static int setup_use_pdma = -1;
-#ifdef SUPPORT_TAGS
+module_param(setup_use_pdma, int, 0);
static int setup_use_tagged_queuing = -1;
-#endif
+module_param(setup_use_tagged_queuing, int, 0);
static int setup_hostid = -1;
+module_param(setup_hostid, int, 0);
/* Time (in jiffies) to wait after a reset; the SCSI standard calls for 250ms,
* we usually do 0.5s to be on the safe side. But Toshiba CD-ROMs once more
#define AFTER_RESET_DELAY (HZ/2)
#endif
-static volatile unsigned char *mac_scsi_regp = NULL;
-static volatile unsigned char *mac_scsi_drq = NULL;
-static volatile unsigned char *mac_scsi_nodrq = NULL;
-
-
/*
* NCR 5380 register access functions
*/
-#if 0
-/* Debug versions */
-#define CTRL(p,v) (*ctrl = (v))
-
-static char macscsi_read(struct Scsi_Host *instance, int reg)
+static inline char macscsi_read(struct Scsi_Host *instance, int reg)
{
- int iobase = instance->io_port;
- int i;
- int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl;
-
- CTRL(iobase, 0);
- i = in_8(iobase + (reg<<4));
- CTRL(iobase, 0x40);
-
- return i;
+ return in_8(instance->base + (reg << 4));
}
-static void macscsi_write(struct Scsi_Host *instance, int reg, int value)
-{
- int iobase = instance->io_port;
- int *ctrl = &((struct NCR5380_hostdata *)instance->hostdata)->ctrl;
-
- CTRL(iobase, 0);
- out_8(iobase + (reg<<4), value);
- CTRL(iobase, 0x40);
-}
-#else
-
-/* Fast versions */
-static __inline__ char macscsi_read(struct Scsi_Host *instance, int reg)
+static inline void macscsi_write(struct Scsi_Host *instance, int reg, int value)
{
- return in_8(instance->io_port + (reg<<4));
+ out_8(instance->base + (reg << 4), value);
}
-static __inline__ void macscsi_write(struct Scsi_Host *instance, int reg, int value)
+#ifndef MODULE
+static int __init mac_scsi_setup(char *str)
{
- out_8(instance->io_port + (reg<<4), value);
-}
-#endif
-
+ int ints[7];
-/*
- * Function : mac_scsi_setup(char *str)
- *
- * Purpose : booter command line initialization of the overrides array,
- *
- * Inputs : str - comma delimited list of options
- *
- */
+ (void)get_options(str, ARRAY_SIZE(ints), ints);
-static int __init mac_scsi_setup(char *str) {
-#ifdef DRIVER_SETUP
- int ints[7];
-
- (void)get_options( str, ARRAY_SIZE(ints), ints);
-
- if (setup_called++ || ints[0] < 1 || ints[0] > 6) {
- printk(KERN_WARNING "scsi: <mac5380>"
- " Usage: mac5380=<can_queue>[,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>,<use_pdma>]\n");
- printk(KERN_ALERT "scsi: <mac5380> Bad Penguin parameters?\n");
- return 0;
- }
-
- if (ints[0] >= 1) {
- if (ints[1] > 0)
- /* no limits on this, just > 0 */
- setup_can_queue = ints[1];
- }
- if (ints[0] >= 2) {
- if (ints[2] > 0)
- setup_cmd_per_lun = ints[2];
- }
- if (ints[0] >= 3) {
- if (ints[3] >= 0) {
- setup_sg_tablesize = ints[3];
- /* Must be <= SG_ALL (255) */
- if (setup_sg_tablesize > SG_ALL)
- setup_sg_tablesize = SG_ALL;
- }
- }
- if (ints[0] >= 4) {
- /* Must be between 0 and 7 */
- if (ints[4] >= 0 && ints[4] <= 7)
- setup_hostid = ints[4];
- else if (ints[4] > 7)
- printk(KERN_WARNING "mac_scsi_setup: invalid host ID %d !\n", ints[4] );
- }
-#ifdef SUPPORT_TAGS
- if (ints[0] >= 5) {
- if (ints[5] >= 0)
- setup_use_tagged_queuing = !!ints[5];
+ if (ints[0] < 1 || ints[0] > 6) {
+ pr_err("Usage: mac5380=<can_queue>[,<cmd_per_lun>[,<sg_tablesize>[,<hostid>[,<use_tags>[,<use_pdma>]]]]]\n");
+ return 0;
}
-
- if (ints[0] == 6) {
- if (ints[6] >= 0)
+ if (ints[0] >= 1)
+ setup_can_queue = ints[1];
+ if (ints[0] >= 2)
+ setup_cmd_per_lun = ints[2];
+ if (ints[0] >= 3)
+ setup_sg_tablesize = ints[3];
+ if (ints[0] >= 4)
+ setup_hostid = ints[4];
+ if (ints[0] >= 5)
+ setup_use_tagged_queuing = ints[5];
+ if (ints[0] >= 6)
setup_use_pdma = ints[6];
- }
-#else
- if (ints[0] == 5) {
- if (ints[5] >= 0)
- setup_use_pdma = ints[5];
- }
-#endif /* SUPPORT_TAGS */
-
-#endif /* DRIVER_SETUP */
return 1;
}
__setup("mac5380=", mac_scsi_setup);
-
-/*
- * Function : int macscsi_detect(struct scsi_host_template * tpnt)
- *
- * Purpose : initializes mac NCR5380 driver based on the
- * command line / compile time port and irq definitions.
- *
- * Inputs : tpnt - template for this SCSI adapter.
- *
- * Returns : 1 if a host adapter was found, 0 if not.
- *
- */
-
-int __init macscsi_detect(struct scsi_host_template * tpnt)
-{
- static int called = 0;
- int flags = 0;
- struct Scsi_Host *instance;
-
- if (!MACH_IS_MAC || called)
- return( 0 );
-
- if (macintosh_config->scsi_type != MAC_SCSI_OLD)
- return( 0 );
-
- /* setup variables */
- tpnt->can_queue =
- (setup_can_queue > 0) ? setup_can_queue : CAN_QUEUE;
- tpnt->cmd_per_lun =
- (setup_cmd_per_lun > 0) ? setup_cmd_per_lun : CMD_PER_LUN;
- tpnt->sg_tablesize =
- (setup_sg_tablesize >= 0) ? setup_sg_tablesize : SG_TABLESIZE;
-
- if (setup_hostid >= 0)
- tpnt->this_id = setup_hostid;
- else {
- /* use 7 as default */
- tpnt->this_id = 7;
- }
-
-#ifdef SUPPORT_TAGS
- if (setup_use_tagged_queuing < 0)
- setup_use_tagged_queuing = USE_TAGGED_QUEUING;
-#endif
-
- /* Once we support multiple 5380s (e.g. DuoDock) we'll do
- something different here */
- instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata));
- if (instance == NULL)
- return 0;
-
- if (macintosh_config->ident == MAC_MODEL_IIFX) {
- mac_scsi_regp = via1+0x8000;
- mac_scsi_drq = via1+0xE000;
- mac_scsi_nodrq = via1+0xC000;
- /* The IIFX should be able to do true DMA, but pseudo-dma doesn't work */
- flags = FLAG_NO_PSEUDO_DMA;
- } else {
- mac_scsi_regp = via1+0x10000;
- mac_scsi_drq = via1+0x6000;
- mac_scsi_nodrq = via1+0x12000;
- }
-
- if (! setup_use_pdma)
- flags = FLAG_NO_PSEUDO_DMA;
-
- instance->io_port = (unsigned long) mac_scsi_regp;
- instance->irq = IRQ_MAC_SCSI;
-
-#ifdef RESET_BOOT
- mac_scsi_reset_boot(instance);
-#endif
-
- NCR5380_init(instance, flags);
-
- instance->n_io_port = 255;
-
- ((struct NCR5380_hostdata *)instance->hostdata)->ctrl = 0;
-
- if (instance->irq != SCSI_IRQ_NONE)
- if (request_irq(instance->irq, NCR5380_intr, 0, "ncr5380", instance)) {
- printk(KERN_WARNING "scsi%d: IRQ%d not free, interrupts disabled\n",
- instance->host_no, instance->irq);
- instance->irq = SCSI_IRQ_NONE;
- }
-
- printk(KERN_INFO "scsi%d: generic 5380 at port %lX irq", instance->host_no, instance->io_port);
- if (instance->irq == SCSI_IRQ_NONE)
- printk (KERN_INFO "s disabled");
- else
- printk (KERN_INFO " %d", instance->irq);
- printk(KERN_INFO " options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
- instance->can_queue, instance->cmd_per_lun, MACSCSI_PUBLIC_RELEASE);
- printk(KERN_INFO "\nscsi%d:", instance->host_no);
- NCR5380_print_options(instance);
- printk("\n");
- called = 1;
- return 1;
-}
-
-int macscsi_release (struct Scsi_Host *shpnt)
-{
- if (shpnt->irq != SCSI_IRQ_NONE)
- free_irq(shpnt->irq, shpnt);
- NCR5380_exit(shpnt);
-
- return 0;
-}
+#endif /* !MODULE */
#ifdef RESET_BOOT
/*
}
#endif
-const char * macscsi_info (struct Scsi_Host *spnt) {
- return "";
-}
-
+#ifdef PSEUDO_DMA
/*
Pseudo-DMA: (Ove Edlund)
The code attempts to catch bus errors that occur if one for example
: "0"(s), "1"(d), "2"(len) \
: "d0")
-
-static int macscsi_pread (struct Scsi_Host *instance,
- unsigned char *dst, int len)
+static int macscsi_pread(struct Scsi_Host *instance,
+ unsigned char *dst, int len)
{
- unsigned char *d;
- volatile unsigned char *s;
-
- NCR5380_local_declare();
- NCR5380_setup(instance);
-
- s = mac_scsi_drq+0x60;
- d = dst;
-
-/* These conditions are derived from MacOS */
-
- while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ)
- && !(NCR5380_read(STATUS_REG) & SR_REQ))
- ;
- if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ)
- && (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)) {
- printk(KERN_ERR "Error in macscsi_pread\n");
- return -1;
- }
-
- CP_IO_TO_MEM(s, d, len);
-
- if (len != 0) {
- printk(KERN_NOTICE "Bus error in macscsi_pread\n");
- return -1;
- }
-
- return 0;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ unsigned char *d;
+ unsigned char *s;
+
+ NCR5380_local_declare();
+ NCR5380_setup(instance);
+
+ s = hostdata->pdma_base + (INPUT_DATA_REG << 4);
+ d = dst;
+
+ /* These conditions are derived from MacOS */
+
+ while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) &&
+ !(NCR5380_read(STATUS_REG) & SR_REQ))
+ ;
+
+ if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) &&
+ (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)) {
+ pr_err("Error in macscsi_pread\n");
+ return -1;
+ }
+
+ CP_IO_TO_MEM(s, d, len);
+
+ if (len != 0) {
+ pr_notice("Bus error in macscsi_pread\n");
+ return -1;
+ }
+
+ return 0;
}
: "0"(s), "1"(d), "2"(len) \
: "d0")
-static int macscsi_pwrite (struct Scsi_Host *instance,
- unsigned char *src, int len)
+static int macscsi_pwrite(struct Scsi_Host *instance,
+ unsigned char *src, int len)
{
- unsigned char *s;
- volatile unsigned char *d;
-
- NCR5380_local_declare();
- NCR5380_setup(instance);
-
- s = src;
- d = mac_scsi_drq;
-
-/* These conditions are derived from MacOS */
-
- while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ)
- && (!(NCR5380_read(STATUS_REG) & SR_REQ)
- || (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)))
- ;
- if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ)) {
- printk(KERN_ERR "Error in macscsi_pwrite\n");
- return -1;
- }
-
- CP_MEM_TO_IO(s, d, len);
-
- if (len != 0) {
- printk(KERN_NOTICE "Bus error in macscsi_pwrite\n");
- return -1;
- }
-
- return 0;
-}
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+ unsigned char *s;
+ unsigned char *d;
+
+ NCR5380_local_declare();
+ NCR5380_setup(instance);
+
+ s = src;
+ d = hostdata->pdma_base + (OUTPUT_DATA_REG << 4);
+
+ /* These conditions are derived from MacOS */
+
+ while (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ) &&
+ (!(NCR5380_read(STATUS_REG) & SR_REQ) ||
+ (NCR5380_read(BUS_AND_STATUS_REG) & BASR_PHASE_MATCH)))
+ ;
+
+ if (!(NCR5380_read(BUS_AND_STATUS_REG) & BASR_DRQ)) {
+ pr_err("Error in macscsi_pwrite\n");
+ return -1;
+ }
+
+ CP_MEM_TO_IO(s, d, len);
+
+ if (len != 0) {
+ pr_notice("Bus error in macscsi_pwrite\n");
+ return -1;
+ }
+ return 0;
+}
+#endif
#include "NCR5380.c"
-static struct scsi_host_template driver_template = {
- .proc_name = "Mac5380",
+#define DRV_MODULE_NAME "mac_scsi"
+#define PFX DRV_MODULE_NAME ": "
+
+static struct scsi_host_template mac_scsi_template = {
+ .module = THIS_MODULE,
+ .proc_name = DRV_MODULE_NAME,
.show_info = macscsi_show_info,
.write_info = macscsi_write_info,
.name = "Macintosh NCR5380 SCSI",
- .detect = macscsi_detect,
- .release = macscsi_release,
.info = macscsi_info,
.queuecommand = macscsi_queue_command,
.eh_abort_handler = macscsi_abort,
.eh_bus_reset_handler = macscsi_bus_reset,
- .can_queue = CAN_QUEUE,
+ .can_queue = 16,
.this_id = 7,
.sg_tablesize = SG_ALL,
- .cmd_per_lun = CMD_PER_LUN,
+ .cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING
};
+static int __init mac_scsi_probe(struct platform_device *pdev)
+{
+ struct Scsi_Host *instance;
+ int error;
+ int host_flags = 0;
+ struct resource *irq, *pio_mem, *pdma_mem = NULL;
+
+ pio_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!pio_mem)
+ return -ENODEV;
+
+#ifdef PSEUDO_DMA
+ pdma_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+#endif
+
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+
+ if (!hwreg_present((unsigned char *)pio_mem->start +
+ (STATUS_REG << 4))) {
+ pr_info(PFX "no device detected at %pap\n", &pio_mem->start);
+ return -ENODEV;
+ }
+
+ if (setup_can_queue > 0)
+ mac_scsi_template.can_queue = setup_can_queue;
+ if (setup_cmd_per_lun > 0)
+ mac_scsi_template.cmd_per_lun = setup_cmd_per_lun;
+ if (setup_sg_tablesize >= 0)
+ mac_scsi_template.sg_tablesize = setup_sg_tablesize;
+ if (setup_hostid >= 0)
+ mac_scsi_template.this_id = setup_hostid & 7;
+ if (setup_use_pdma < 0)
+ setup_use_pdma = 0;
+
+ instance = scsi_host_alloc(&mac_scsi_template,
+ sizeof(struct NCR5380_hostdata));
+ if (!instance)
+ return -ENOMEM;
+
+ instance->base = pio_mem->start;
+ if (irq)
+ instance->irq = irq->start;
+ else
+ instance->irq = NO_IRQ;
+
+ if (pdma_mem && setup_use_pdma) {
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
+
+ hostdata->pdma_base = (unsigned char *)pdma_mem->start;
+ } else
+ host_flags |= FLAG_NO_PSEUDO_DMA;
+
+#ifdef RESET_BOOT
+ mac_scsi_reset_boot(instance);
+#endif
+
+#ifdef SUPPORT_TAGS
+ host_flags |= setup_use_tagged_queuing > 0 ? FLAG_TAGGED_QUEUING : 0;
+#endif
+
+ NCR5380_init(instance, host_flags);
+
+ if (instance->irq != NO_IRQ) {
+ error = request_irq(instance->irq, macscsi_intr, IRQF_SHARED,
+ "NCR5380", instance);
+ if (error)
+ goto fail_irq;
+ }
+
+ error = scsi_add_host(instance, NULL);
+ if (error)
+ goto fail_host;
+
+ platform_set_drvdata(pdev, instance);
+
+ scsi_scan_host(instance);
+ return 0;
+
+fail_host:
+ if (instance->irq != NO_IRQ)
+ free_irq(instance->irq, instance);
+fail_irq:
+ NCR5380_exit(instance);
+ scsi_host_put(instance);
+ return error;
+}
+
+static int __exit mac_scsi_remove(struct platform_device *pdev)
+{
+ struct Scsi_Host *instance = platform_get_drvdata(pdev);
+
+ scsi_remove_host(instance);
+ if (instance->irq != NO_IRQ)
+ free_irq(instance->irq, instance);
+ NCR5380_exit(instance);
+ scsi_host_put(instance);
+ return 0;
+}
+
+static struct platform_driver mac_scsi_driver = {
+ .remove = __exit_p(mac_scsi_remove),
+ .driver = {
+ .name = DRV_MODULE_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+module_platform_driver_probe(mac_scsi_driver, mac_scsi_probe);
-#include "scsi_module.c"
+MODULE_ALIAS("platform:" DRV_MODULE_NAME);
+MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * Cumana Generic NCR5380 driver defines
- *
- * Copyright 1993, Drew Eckhardt
- * Visionary Computing
- * (Unix and Linux consulting and custom programming)
- * drew@colorado.edu
- * +1 (303) 440-4894
- *
- * ALPHA RELEASE 1.
- *
- * For more information, please consult
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
- */
-
-#ifndef MAC_NCR5380_H
-#define MAC_NCR5380_H
-
-#define MACSCSI_PUBLIC_RELEASE 2
-
-#ifndef ASM
-
-#ifndef CMD_PER_LUN
-#define CMD_PER_LUN 2
-#endif
-
-#ifndef CAN_QUEUE
-#define CAN_QUEUE 16
-#endif
-
-#ifndef SG_TABLESIZE
-#define SG_TABLESIZE SG_NONE
-#endif
-
-#ifndef USE_TAGGED_QUEUING
-#define USE_TAGGED_QUEUING 0
-#endif
-
-#include <scsi/scsicam.h>
-
-#define NCR5380_implementation_fields \
- int port, ctrl
-
-#define NCR5380_local_declare() \
- struct Scsi_Host *_instance
-
-#define NCR5380_setup(instance) \
- _instance = instance
-
-#define NCR5380_read(reg) macscsi_read(_instance, reg)
-#define NCR5380_write(reg, value) macscsi_write(_instance, reg, value)
-
-#define NCR5380_pread macscsi_pread
-#define NCR5380_pwrite macscsi_pwrite
-
-#define NCR5380_intr macscsi_intr
-#define NCR5380_queue_command macscsi_queue_command
-#define NCR5380_abort macscsi_abort
-#define NCR5380_bus_reset macscsi_bus_reset
-#define NCR5380_show_info macscsi_show_info
-#define NCR5380_write_info macscsi_write_info
-
-#endif /* ndef ASM */
-#endif /* MAC_NCR5380_H */
-
cmd->device->id, (u32)cmd->device->lun);
if(list_empty(&adapter->pending_list))
- return FALSE;
+ return FAILED;
list_for_each_safe(pos, next, &adapter->pending_list) {
(aor==SCB_ABORT) ? "ABORTING":"RESET",
scb->idx);
- return FALSE;
+ return FAILED;
}
else {
list_add_tail(SCSI_LIST(cmd),
&adapter->completed_list);
- return TRUE;
+ return SUCCESS;
}
}
}
- return FALSE;
+ return FAILED;
}
static inline int
NULL,
};
-/**
- * megaraid_change_queue_depth - Change the device's queue depth
- * @sdev: scsi device struct
- * @qdepth: depth to set
- * @reason: calling context
- *
- * Return value:
- * actual depth set
- */
-static int megaraid_change_queue_depth(struct scsi_device *sdev, int qdepth,
- int reason)
-{
- if (reason != SCSI_QDEPTH_DEFAULT)
- return -EOPNOTSUPP;
-
- if (qdepth > MBOX_MAX_SCSI_CMDS)
- qdepth = MBOX_MAX_SCSI_CMDS;
- scsi_adjust_queue_depth(sdev, 0, qdepth);
- return sdev->queue_depth;
-}
-
/*
* Scsi host template for megaraid unified driver
*/
.eh_device_reset_handler = megaraid_reset_handler,
.eh_bus_reset_handler = megaraid_reset_handler,
.eh_host_reset_handler = megaraid_reset_handler,
- .change_queue_depth = megaraid_change_queue_depth,
+ .change_queue_depth = scsi_change_queue_depth,
.use_clustering = ENABLE_CLUSTERING,
.no_write_same = 1,
.sdev_attrs = megaraid_sdev_attrs,
/*
* Linux MegaRAID driver for SAS based RAID controllers
*
- * Copyright (c) 2003-2012 LSI Corporation.
+ * Copyright (c) 2003-2013 LSI Corporation
+ * Copyright (c) 2013-2014 Avago Technologies
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* FILE: megaraid_sas.h
*
- * Authors: LSI Corporation
+ * Authors: Avago Technologies
+ * Kashyap Desai <kashyap.desai@avagotech.com>
+ * Sumit Saxena <sumit.saxena@avagotech.com>
*
- * Send feedback to: <megaraidlinux@lsi.com>
+ * Send feedback to: megaraidlinux.pdl@avagotech.com
*
- * Mail to: LSI Corporation, 1621 Barber Lane, Milpitas, CA 95035
- * ATTN: Linuxraid
+ * Mail to: Avago Technologies, 350 West Trimble Road, Building 90,
+ * San Jose, California 95131
*/
#ifndef LSI_MEGARAID_SAS_H
/*
* MegaRAID SAS Driver meta data
*/
-#define MEGASAS_VERSION "06.805.06.00-rc1"
-#define MEGASAS_RELDATE "Sep. 4, 2014"
-#define MEGASAS_EXT_VERSION "Thu. Sep. 4 17:00:00 PDT 2014"
+#define MEGASAS_VERSION "06.805.06.01-rc1"
/*
* Device IDs
struct LD_LOAD_BALANCE_INFO *lbInfo, struct IO_REQUEST_INFO *in_info);
void mr_update_load_balance_params(struct MR_DRV_RAID_MAP_ALL *map,
struct LD_LOAD_BALANCE_INFO *lbInfo);
-int megasas_get_ctrl_info(struct megasas_instance *instance,
- struct megasas_ctrl_info *ctrl_info);
+int megasas_get_ctrl_info(struct megasas_instance *instance);
int megasas_set_crash_dump_params(struct megasas_instance *instance,
u8 crash_buf_state);
void megasas_free_host_crash_buffer(struct megasas_instance *instance);
/*
* Linux MegaRAID driver for SAS based RAID controllers
*
- * Copyright (c) 2003-2012 LSI Corporation.
+ * Copyright (c) 2003-2013 LSI Corporation
+ * Copyright (c) 2013-2014 Avago Technologies
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
*
- * FILE: megaraid_sas_base.c
- * Version : 06.805.06.00-rc1
- *
- * Authors: LSI Corporation
+ * Authors: Avago Technologies
* Sreenivas Bagalkote
* Sumant Patro
* Bo Yang
- * Adam Radford <linuxraid@lsi.com>
+ * Adam Radford
+ * Kashyap Desai <kashyap.desai@avagotech.com>
+ * Sumit Saxena <sumit.saxena@avagotech.com>
*
- * Send feedback to: <megaraidlinux@lsi.com>
+ * Send feedback to: megaraidlinux.pdl@avagotech.com
*
- * Mail to: LSI Corporation, 1621 Barber Lane, Milpitas, CA 95035
- * ATTN: Linuxraid
+ * Mail to: Avago Technologies, 350 West Trimble Road, Building 90,
+ * San Jose, California 95131
*/
#include <linux/kernel.h>
cpu_to_le32(upper_32_bits(cmd_to_abort->frame_phys_addr));
cmd->sync_cmd = 1;
- cmd->cmd_status = 0xFF;
+ cmd->cmd_status = ENODATA;
instance->instancet->issue_dcmd(instance, cmd);
instance = (struct megasas_instance *)
scmd->device->host->hostdata;
+ if (instance->unload == 1) {
+ scmd->result = DID_NO_CONNECT << 16;
+ scmd->scsi_done(scmd);
+ return 0;
+ }
+
if (instance->issuepend_done == 0)
return SCSI_MLQUEUE_HOST_BUSY;
}
}
-static int megasas_change_queue_depth(struct scsi_device *sdev,
- int queue_depth, int reason)
-{
- if (reason != SCSI_QDEPTH_DEFAULT)
- return -EOPNOTSUPP;
-
- if (queue_depth > sdev->host->can_queue)
- queue_depth = sdev->host->can_queue;
- scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev),
- queue_depth);
-
- return queue_depth;
-}
-
static ssize_t
megasas_fw_crash_buffer_store(struct device *cdev,
struct device_attribute *attr, const char *buf, size_t count)
.shost_attrs = megaraid_host_attrs,
.bios_param = megasas_bios_param,
.use_clustering = ENABLE_CLUSTERING,
- .change_queue_depth = megasas_change_queue_depth,
+ .change_queue_depth = scsi_change_queue_depth,
.no_write_same = 1,
};
return ret;
}
+/*
+ * megasas_update_ext_vd_details : Update details w.r.t Extended VD
+ * instance : Controller's instance
+*/
+static void megasas_update_ext_vd_details(struct megasas_instance *instance)
+{
+ struct fusion_context *fusion;
+ u32 old_map_sz;
+ u32 new_map_sz;
+
+ fusion = instance->ctrl_context;
+ /* For MFI based controllers return dummy success */
+ if (!fusion)
+ return;
+
+ instance->supportmax256vd =
+ instance->ctrl_info->adapterOperations3.supportMaxExtLDs;
+ /* Below is additional check to address future FW enhancement */
+ if (instance->ctrl_info->max_lds > 64)
+ instance->supportmax256vd = 1;
+
+ instance->drv_supported_vd_count = MEGASAS_MAX_LD_CHANNELS
+ * MEGASAS_MAX_DEV_PER_CHANNEL;
+ instance->drv_supported_pd_count = MEGASAS_MAX_PD_CHANNELS
+ * MEGASAS_MAX_DEV_PER_CHANNEL;
+ if (instance->supportmax256vd) {
+ instance->fw_supported_vd_count = MAX_LOGICAL_DRIVES_EXT;
+ instance->fw_supported_pd_count = MAX_PHYSICAL_DEVICES;
+ } else {
+ instance->fw_supported_vd_count = MAX_LOGICAL_DRIVES;
+ instance->fw_supported_pd_count = MAX_PHYSICAL_DEVICES;
+ }
+ dev_info(&instance->pdev->dev, "Firmware supports %d VD %d PD\n",
+ instance->fw_supported_vd_count,
+ instance->fw_supported_pd_count);
+ dev_info(&instance->pdev->dev, "Driver supports %d VD %d PD\n",
+ instance->drv_supported_vd_count,
+ instance->drv_supported_pd_count);
+
+ old_map_sz = sizeof(struct MR_FW_RAID_MAP) +
+ (sizeof(struct MR_LD_SPAN_MAP) *
+ (instance->fw_supported_vd_count - 1));
+ new_map_sz = sizeof(struct MR_FW_RAID_MAP_EXT);
+ fusion->drv_map_sz = sizeof(struct MR_DRV_RAID_MAP) +
+ (sizeof(struct MR_LD_SPAN_MAP) *
+ (instance->drv_supported_vd_count - 1));
+
+ fusion->max_map_sz = max(old_map_sz, new_map_sz);
+
+
+ if (instance->supportmax256vd)
+ fusion->current_map_sz = new_map_sz;
+ else
+ fusion->current_map_sz = old_map_sz;
+
+}
+
/**
* megasas_get_controller_info - Returns FW's controller structure
* @instance: Adapter soft state
- * @ctrl_info: Controller information structure
*
* Issues an internal command (DCMD) to get the FW's controller structure.
* This information is mainly used to find out the maximum IO transfer per
* command supported by the FW.
*/
int
-megasas_get_ctrl_info(struct megasas_instance *instance,
- struct megasas_ctrl_info *ctrl_info)
+megasas_get_ctrl_info(struct megasas_instance *instance)
{
int ret = 0;
struct megasas_cmd *cmd;
struct megasas_dcmd_frame *dcmd;
struct megasas_ctrl_info *ci;
+ struct megasas_ctrl_info *ctrl_info;
dma_addr_t ci_h = 0;
+ ctrl_info = instance->ctrl_info;
+
cmd = megasas_get_cmd(instance);
if (!cmd) {
else
ret = megasas_issue_polled(instance, cmd);
- if (!ret)
+ if (!ret) {
memcpy(ctrl_info, ci, sizeof(struct megasas_ctrl_info));
+ le32_to_cpus((u32 *)&ctrl_info->properties.OnOffProperties);
+ le32_to_cpus((u32 *)&ctrl_info->adapterOperations2);
+ le32_to_cpus((u32 *)&ctrl_info->adapterOperations3);
+ megasas_update_ext_vd_details(instance);
+ }
pci_free_consistent(instance->pdev, sizeof(struct megasas_ctrl_info),
ci, ci_h);
if (megasas_issue_init_mfi(instance))
goto fail_fw_init;
- if (megasas_get_ctrl_info(instance, instance->ctrl_info)) {
+ if (megasas_get_ctrl_info(instance)) {
dev_err(&instance->pdev->dev, "(%d): Could get controller info "
"Fail from %s %d\n", instance->unique_id,
__func__, __LINE__);
instance->msixentry[i].entry = i;
i = pci_enable_msix_range(instance->pdev, instance->msixentry,
1, instance->msix_vectors);
- if (i)
+ if (i > 0)
instance->msix_vectors = i;
else
instance->msix_vectors = 0;
dev_info(&instance->pdev->dev,
"Controller type: iMR\n");
}
- /* OnOffProperties are converted into CPU arch*/
- le32_to_cpus((u32 *)&ctrl_info->properties.OnOffProperties);
instance->disableOnlineCtrlReset =
ctrl_info->properties.OnOffProperties.disableOnlineCtrlReset;
- /* adapterOperations2 are converted into CPU arch*/
- le32_to_cpus((u32 *)&ctrl_info->adapterOperations2);
instance->mpio = ctrl_info->adapterOperations2.mpio;
instance->UnevenSpanSupport =
ctrl_info->adapterOperations2.supportUnevenSpans;
"requestorId %d\n", instance->requestorId);
}
- le32_to_cpus((u32 *)&ctrl_info->adapterOperations3);
instance->crash_dump_fw_support =
ctrl_info->adapterOperations3.supportCrashDump;
instance->crash_dump_drv_support =
if (tmp_sectors && (instance->max_sectors_per_req > tmp_sectors))
instance->max_sectors_per_req = tmp_sectors;
- kfree(ctrl_info);
-
/* Check for valid throttlequeuedepth module parameter */
if (instance->is_imr) {
if (throttlequeuedepth > (instance->max_fw_cmds -
return -ENODEV;
}
- /*
- * Trigger SCSI to scan our drives
- */
- scsi_scan_host(host);
return 0;
}
goto fail_alloc_dma_buf;
}
fusion = instance->ctrl_context;
+ memset(fusion, 0,
+ ((1 << PAGE_SHIFT) << instance->ctrl_context_pages));
INIT_LIST_HEAD(&fusion->cmd_pool);
spin_lock_init(&fusion->mpt_pool_lock);
memset(fusion->load_balance_info, 0,
goto fail_io_attach;
instance->unload = 0;
+ /*
+ * Trigger SCSI to scan our drives
+ */
+ scsi_scan_host(host);
/*
* Initiate AEN (Asynchronous Event Notification)
megasas_issue_blocked_cmd(instance, cmd, 0);
cmd->sync_cmd = 0;
+ if (instance->unload == 1) {
+ dev_info(&instance->pdev->dev, "Driver unload is in progress "
+ "don't submit data to application\n");
+ goto out;
+ }
/*
* copy out the kernel buffers to user buffers
*/
static DRIVER_ATTR(version, S_IRUGO, megasas_sysfs_show_version, NULL);
-static ssize_t
-megasas_sysfs_show_release_date(struct device_driver *dd, char *buf)
-{
- return snprintf(buf, strlen(MEGASAS_RELDATE) + 2, "%s\n",
- MEGASAS_RELDATE);
-}
-
-static DRIVER_ATTR(release_date, S_IRUGO, megasas_sysfs_show_release_date,
- NULL);
-
static ssize_t
megasas_sysfs_show_support_poll_for_event(struct device_driver *dd, char *buf)
{
/*
* Announce driver version and other information
*/
- printk(KERN_INFO "megasas: %s %s\n", MEGASAS_VERSION,
- MEGASAS_EXT_VERSION);
+ pr_info("megasas: %s\n", MEGASAS_VERSION);
spin_lock_init(&poll_aen_lock);
&driver_attr_version);
if (rval)
goto err_dcf_attr_ver;
- rval = driver_create_file(&megasas_pci_driver.driver,
- &driver_attr_release_date);
- if (rval)
- goto err_dcf_rel_date;
rval = driver_create_file(&megasas_pci_driver.driver,
&driver_attr_support_poll_for_event);
err_dcf_dbg_lvl:
driver_remove_file(&megasas_pci_driver.driver,
&driver_attr_support_poll_for_event);
-
err_dcf_support_poll_for_event:
- driver_remove_file(&megasas_pci_driver.driver,
- &driver_attr_release_date);
-
-err_dcf_rel_date:
driver_remove_file(&megasas_pci_driver.driver, &driver_attr_version);
err_dcf_attr_ver:
pci_unregister_driver(&megasas_pci_driver);
&driver_attr_support_poll_for_event);
driver_remove_file(&megasas_pci_driver.driver,
&driver_attr_support_device_change);
- driver_remove_file(&megasas_pci_driver.driver,
- &driver_attr_release_date);
driver_remove_file(&megasas_pci_driver.driver, &driver_attr_version);
pci_unregister_driver(&megasas_pci_driver);
/*
* Linux MegaRAID driver for SAS based RAID controllers
*
- * Copyright (c) 2009-2012 LSI Corporation.
+ * Copyright (c) 2009-2013 LSI Corporation
+ * Copyright (c) 2013-2014 Avago Technologies
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* FILE: megaraid_sas_fp.c
*
- * Authors: LSI Corporation
+ * Authors: Avago Technologies
* Sumant Patro
* Varad Talamacki
* Manoj Jose
+ * Kashyap Desai <kashyap.desai@avagotech.com>
+ * Sumit Saxena <sumit.saxena@avagotech.com>
*
- * Send feedback to: <megaraidlinux@lsi.com>
+ * Send feedback to: megaraidlinux.pdl@avagotech.com
*
- * Mail to: LSI Corporation, 1621 Barber Lane, Milpitas, CA 95035
- * ATTN: Linuxraid
+ * Mail to: Avago Technologies, 350 West Trimble Road, Building 90,
+ * San Jose, California 95131
*/
#include <linux/kernel.h>
/* New Raid map will not set totalSize, so keep expected value
* for legacy code in ValidateMapInfo
*/
- pDrvRaidMap->totalSize = sizeof(struct MR_FW_RAID_MAP_EXT);
+ pDrvRaidMap->totalSize =
+ cpu_to_le32(sizeof(struct MR_FW_RAID_MAP_EXT));
} else {
fw_map_old = (struct MR_FW_RAID_MAP_ALL *)
fusion->ld_map[(instance->map_id & 1)];
pFwRaidMap = &fw_map_old->raidMap;
#if VD_EXT_DEBUG
- for (i = 0; i < pFwRaidMap->ldCount; i++) {
+ for (i = 0; i < le16_to_cpu(pFwRaidMap->ldCount); i++) {
dev_dbg(&instance->pdev->dev, "(%d) :Index 0x%x "
"Target Id 0x%x Seq Num 0x%x Size 0/%llx\n",
instance->unique_id, i,
memset(drv_map, 0, fusion->drv_map_sz);
pDrvRaidMap->totalSize = pFwRaidMap->totalSize;
- pDrvRaidMap->ldCount = pFwRaidMap->ldCount;
+ pDrvRaidMap->ldCount = (__le16)pFwRaidMap->ldCount;
pDrvRaidMap->fpPdIoTimeoutSec = pFwRaidMap->fpPdIoTimeoutSec;
for (i = 0; i < MAX_RAIDMAP_LOGICAL_DRIVES + MAX_RAIDMAP_VIEWS; i++)
pDrvRaidMap->ldTgtIdToLd[i] =
(u8)pFwRaidMap->ldTgtIdToLd[i];
- for (i = 0; i < pDrvRaidMap->ldCount; i++) {
+ for (i = 0; i < le16_to_cpu(pDrvRaidMap->ldCount); i++) {
pDrvRaidMap->ldSpanMap[i] = pFwRaidMap->ldSpanMap[i];
#if VD_EXT_DEBUG
dev_dbg(&instance->pdev->dev,
else
expected_size =
(sizeof(struct MR_FW_RAID_MAP) - sizeof(struct MR_LD_SPAN_MAP) +
- (sizeof(struct MR_LD_SPAN_MAP) * le32_to_cpu(pDrvRaidMap->ldCount)));
+ (sizeof(struct MR_LD_SPAN_MAP) * le16_to_cpu(pDrvRaidMap->ldCount)));
if (le32_to_cpu(pDrvRaidMap->totalSize) != expected_size) {
dev_err(&instance->pdev->dev, "map info structure size 0x%x is not matching with ld count\n",
mr_update_load_balance_params(drv_map, lbInfo);
- num_lds = le32_to_cpu(drv_map->raidMap.ldCount);
+ num_lds = le16_to_cpu(drv_map->raidMap.ldCount);
/*Convert Raid capability values to CPU arch */
for (ldCount = 0; ldCount < num_lds; ldCount++) {
quad = &map->raidMap.ldSpanMap[ld].
spanBlock[span].
block_span_info.quad[info];
- if (le32_to_cpu(quad->diff == 0))
+ if (le32_to_cpu(quad->diff) == 0)
return SPAN_INVALID;
if (le64_to_cpu(quad->logStart) <= row &&
row <= le64_to_cpu(quad->logEnd) &&
span_set->span_row_data_width) * span_set->diff;
for (span = 0, span_offset = 0; span < raid->spanDepth; span++)
if (le32_to_cpu(map->raidMap.ldSpanMap[ld].spanBlock[span].
- block_span_info.noElements >= info+1)) {
+ block_span_info.noElements) >= info+1) {
if (strip_offset >=
span_set->strip_offset[span])
span_offset++;
/*
* Linux MegaRAID driver for SAS based RAID controllers
*
- * Copyright (c) 2009-2012 LSI Corporation.
+ * Copyright (c) 2009-2013 LSI Corporation
+ * Copyright (c) 2013-2014 Avago Technologies
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* FILE: megaraid_sas_fusion.c
*
- * Authors: LSI Corporation
+ * Authors: Avago Technologies
* Sumant Patro
- * Adam Radford <linuxraid@lsi.com>
+ * Adam Radford
+ * Kashyap Desai <kashyap.desai@avagotech.com>
+ * Sumit Saxena <sumit.saxena@avagotech.com>
*
- * Send feedback to: <megaraidlinux@lsi.com>
+ * Send feedback to: megaraidlinux.pdl@avagotech.com
*
- * Mail to: LSI Corporation, 1621 Barber Lane, Milpitas, CA 95035
- * ATTN: Linuxraid
+ * Mail to: Avago Technologies, 350 West Trimble Road, Building 90,
+ * San Jose, California 95131
*/
#include <linux/kernel.h>
map = fusion->ld_drv_map[instance->map_id & 1];
- num_lds = le32_to_cpu(map->raidMap.ldCount);
+ num_lds = le16_to_cpu(map->raidMap.ldCount);
dcmd = &cmd->frame->dcmd;
goto fail_ioc_init;
megasas_display_intel_branding(instance);
- if (megasas_get_ctrl_info(instance, instance->ctrl_info)) {
+ if (megasas_get_ctrl_info(instance)) {
dev_err(&instance->pdev->dev,
"Could not get controller info. Fail from %s %d\n",
__func__, __LINE__);
goto fail_ioc_init;
}
- instance->supportmax256vd =
- instance->ctrl_info->adapterOperations3.supportMaxExtLDs;
- /* Below is additional check to address future FW enhancement */
- if (instance->ctrl_info->max_lds > 64)
- instance->supportmax256vd = 1;
- instance->drv_supported_vd_count = MEGASAS_MAX_LD_CHANNELS
- * MEGASAS_MAX_DEV_PER_CHANNEL;
- instance->drv_supported_pd_count = MEGASAS_MAX_PD_CHANNELS
- * MEGASAS_MAX_DEV_PER_CHANNEL;
- if (instance->supportmax256vd) {
- instance->fw_supported_vd_count = MAX_LOGICAL_DRIVES_EXT;
- instance->fw_supported_pd_count = MAX_PHYSICAL_DEVICES;
- } else {
- instance->fw_supported_vd_count = MAX_LOGICAL_DRIVES;
- instance->fw_supported_pd_count = MAX_PHYSICAL_DEVICES;
- }
- dev_info(&instance->pdev->dev, "Firmware supports %d VDs %d PDs\n"
- "Driver supports %d VDs %d PDs\n",
- instance->fw_supported_vd_count,
- instance->fw_supported_pd_count,
- instance->drv_supported_vd_count,
- instance->drv_supported_pd_count);
-
instance->flag_ieee = 1;
fusion->fast_path_io = 0;
- fusion->old_map_sz =
- sizeof(struct MR_FW_RAID_MAP) + (sizeof(struct MR_LD_SPAN_MAP) *
- (instance->fw_supported_vd_count - 1));
- fusion->new_map_sz =
- sizeof(struct MR_FW_RAID_MAP_EXT);
- fusion->drv_map_sz =
- sizeof(struct MR_DRV_RAID_MAP) + (sizeof(struct MR_LD_SPAN_MAP) *
- (instance->drv_supported_vd_count - 1));
-
fusion->drv_map_pages = get_order(fusion->drv_map_sz);
for (i = 0; i < 2; i++) {
fusion->ld_map[i] = NULL;
fusion->drv_map_pages);
goto fail_ioc_init;
}
+ memset(fusion->ld_drv_map[i], 0,
+ ((1 << PAGE_SHIFT) << fusion->drv_map_pages));
}
- fusion->max_map_sz = max(fusion->old_map_sz, fusion->new_map_sz);
-
- if (instance->supportmax256vd)
- fusion->current_map_sz = fusion->new_map_sz;
- else
- fusion->current_map_sz = fusion->old_map_sz;
-
-
for (i = 0; i < 2; i++) {
fusion->ld_map[i] = dma_alloc_coherent(&instance->pdev->dev,
fusion->max_map_sz,
struct megasas_register_set __iomem *regs)
{
#if defined(writeq) && defined(CONFIG_64BIT)
- u64 req_data = (((u64)req_desc_hi << 32) | (u32)req_desc_lo);
+ u64 req_data = (((u64)le32_to_cpu(req_desc_hi) << 32) |
+ le32_to_cpu(req_desc_lo));
- writeq(le64_to_cpu(req_data), &(regs)->inbound_low_queue_port);
+ writeq(req_data, &(regs)->inbound_low_queue_port);
#else
unsigned long flags;
/* Logical block reference tag */
io_request->CDB.EEDP32.PrimaryReferenceTag =
cpu_to_be32(ref_tag);
- io_request->CDB.EEDP32.PrimaryApplicationTagMask = 0xffff;
+ io_request->CDB.EEDP32.PrimaryApplicationTagMask = cpu_to_be16(0xffff);
io_request->IoFlags = cpu_to_le16(32); /* Specify 32-byte cdb */
/* Transfer length */
/* set RAID context values */
pRAID_Context->regLockFlags = REGION_TYPE_SHARED_READ;
- pRAID_Context->timeoutValue = raid->fpIoTimeoutForLd;
+ pRAID_Context->timeoutValue = cpu_to_le16(raid->fpIoTimeoutForLd);
pRAID_Context->VirtualDiskTgtId = cpu_to_le16(device_id);
pRAID_Context->regLockRowLBA = 0;
pRAID_Context->regLockLength = 0;
* megasas_complete_cmd
*/
- if (frame_hdr->flags & MFI_FRAME_DONT_POST_IN_REPLY_QUEUE)
+ if (frame_hdr->flags & cpu_to_le16(MFI_FRAME_DONT_POST_IN_REPLY_QUEUE))
cmd->flags = MFI_FRAME_DONT_POST_IN_REPLY_QUEUE;
fusion = instance->ctrl_context;
"memory allocation failed at index %d\n", i);
break;
}
+ memset(instance->crash_buf[i], 0,
+ ((1 << PAGE_SHIFT) << instance->crash_buf_pages));
}
instance->drv_buf_alloc = i;
}
}
}
- clear_bit(MEGASAS_FUSION_IN_RESET,
- &instance->reset_flags);
- instance->instancet->enable_intr(instance);
- instance->adprecovery = MEGASAS_HBA_OPERATIONAL;
-
+ if (megasas_get_ctrl_info(instance)) {
+ dev_info(&instance->pdev->dev,
+ "Failed from %s %d\n",
+ __func__, __LINE__);
+ instance->adprecovery =
+ MEGASAS_HW_CRITICAL_ERROR;
+ megaraid_sas_kill_hba(instance);
+ retval = FAILED;
+ }
/* Reset load balance info */
memset(fusion->load_balance_info, 0,
sizeof(struct LD_LOAD_BALANCE_INFO)
if (!megasas_get_map_info(instance))
megasas_sync_map_info(instance);
+ clear_bit(MEGASAS_FUSION_IN_RESET,
+ &instance->reset_flags);
+ instance->instancet->enable_intr(instance);
+ instance->adprecovery = MEGASAS_HBA_OPERATIONAL;
+
/* Restart SR-IOV heartbeat */
if (instance->requestorId) {
if (!megasas_sriov_start_heartbeat(instance, 0))
"successful for scsi%d.\n",
instance->host->host_no);
- if (instance->crash_dump_drv_support) {
- if (instance->crash_dump_app_support)
- megasas_set_crash_dump_params(instance,
- MR_CRASH_BUF_TURN_ON);
- else
- megasas_set_crash_dump_params(instance,
- MR_CRASH_BUF_TURN_OFF);
- }
+ if (instance->crash_dump_drv_support &&
+ instance->crash_dump_app_support)
+ megasas_set_crash_dump_params(instance,
+ MR_CRASH_BUF_TURN_ON);
+ else
+ megasas_set_crash_dump_params(instance,
+ MR_CRASH_BUF_TURN_OFF);
+
retval = SUCCESS;
goto out;
}
/*
* Linux MegaRAID driver for SAS based RAID controllers
*
- * Copyright (c) 2009-2012 LSI Corporation.
+ * Copyright (c) 2009-2013 LSI Corporation
+ * Copyright (c) 2013-2014 Avago Technologies
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
*
* FILE: megaraid_sas_fusion.h
*
- * Authors: LSI Corporation
+ * Authors: Avago Technologies
* Manoj Jose
* Sumant Patro
+ * Kashyap Desai <kashyap.desai@avagotech.com>
+ * Sumit Saxena <sumit.saxena@avagotech.com>
*
- * Send feedback to: <megaraidlinux@lsi.com>
+ * Send feedback to: megaraidlinux.pdl@avagotech.com
*
- * Mail to: LSI Corporation, 1621 Barber Lane, Milpitas, CA 95035
- * ATTN: Linuxraid
+ * Mail to: Avago Technologies, 350 West Trimble Road, Building 90,
+ * San Jose, California 95131
*/
#ifndef _MEGARAID_SAS_FUSION_H_
u32 max_map_sz;
u32 current_map_sz;
- u32 old_map_sz;
- u32 new_map_sz;
u32 drv_map_sz;
u32 drv_map_pages;
u8 fast_path_io;
}
/**
- * _scsih_adjust_queue_depth - setting device queue depth
+ * _scsih_change_queue_depth - setting device queue depth
* @sdev: scsi device struct
* @qdepth: requested queue depth
*
- *
- * Returns nothing
+ * Returns queue depth.
*/
-static void
-_scsih_adjust_queue_depth(struct scsi_device *sdev, int qdepth)
+static int
+_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
{
struct Scsi_Host *shost = sdev->host;
int max_depth;
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
not_sata:
-
if (!sdev->tagged_supported)
max_depth = 1;
if (qdepth > max_depth)
qdepth = max_depth;
- scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
-}
-
-/**
- * _scsih_change_queue_depth - setting device queue depth
- * @sdev: scsi device struct
- * @qdepth: requested queue depth
- * @reason: SCSI_QDEPTH_DEFAULT/SCSI_QDEPTH_QFULL/SCSI_QDEPTH_RAMP_UP
- * (see include/scsi/scsi_host.h for definition)
- *
- * Returns queue depth.
- */
-static int
-_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
-{
- if (reason == SCSI_QDEPTH_DEFAULT || reason == SCSI_QDEPTH_RAMP_UP)
- _scsih_adjust_queue_depth(sdev, qdepth);
- else if (reason == SCSI_QDEPTH_QFULL)
- scsi_track_queue_full(sdev, qdepth);
- else
- return -EOPNOTSUPP;
-
- if (sdev->inquiry_len > 7)
- sdev_printk(KERN_INFO, sdev, "qdepth(%d), tagged(%d), "
- "simple(%d), ordered(%d), scsi_level(%d), cmd_que(%d)\n",
- sdev->queue_depth, sdev->tagged_supported, sdev->simple_tags,
- sdev->ordered_tags, sdev->scsi_level,
- (sdev->inquiry[7] & 2) >> 1);
-
- return sdev->queue_depth;
-}
-
-/**
- * _scsih_change_queue_type - changing device queue tag type
- * @sdev: scsi device struct
- * @tag_type: requested tag type
- *
- * Returns queue tag type.
- */
-static int
-_scsih_change_queue_type(struct scsi_device *sdev, int tag_type)
-{
- if (sdev->tagged_supported) {
- scsi_set_tag_type(sdev, tag_type);
- if (tag_type)
- scsi_activate_tcq(sdev, sdev->queue_depth);
- else
- scsi_deactivate_tcq(sdev, sdev->queue_depth);
- } else
- tag_type = 0;
-
- return tag_type;
+ return scsi_change_queue_depth(sdev, qdepth);
}
/**
r_level, raid_device->handle,
(unsigned long long)raid_device->wwid,
raid_device->num_pds, ds);
- _scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT);
+ _scsih_change_queue_depth(sdev, qdepth);
/* raid transport support */
if (!ioc->is_warpdrive)
_scsih_set_level(sdev, raid_device->volume_type);
_scsih_display_sata_capabilities(ioc, handle, sdev);
- _scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT);
+ _scsih_change_queue_depth(sdev, qdepth);
if (ssp_target) {
sas_read_port_mode_page(sdev);
mpi_control = MPI2_SCSIIO_CONTROL_NODATATRANSFER;
/* set tags */
- if (!(sas_device_priv_data->flags & MPT_DEVICE_FLAGS_INIT)) {
- if (scmd->device->tagged_supported) {
- if (scmd->device->ordered_tags)
- mpi_control |= MPI2_SCSIIO_CONTROL_ORDEREDQ;
- else
- mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
- } else
- mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
- } else
- mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
+ mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
+
/* Make sure Device is not raid volume.
* We do not expose raid functionality to upper layer for warpdrive.
*/
.scan_finished = _scsih_scan_finished,
.scan_start = _scsih_scan_start,
.change_queue_depth = _scsih_change_queue_depth,
- .change_queue_type = _scsih_change_queue_type,
+ .change_queue_type = scsi_change_queue_type,
.eh_abort_handler = _scsih_abort,
.eh_device_reset_handler = _scsih_dev_reset,
.eh_target_reset_handler = _scsih_target_reset,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = mpt2sas_host_attrs,
.sdev_attrs = mpt2sas_dev_attrs,
+ .track_queue_depth = 1,
};
/**
return found;
}
-
-static void
-_scsih_adjust_queue_depth(struct scsi_device *sdev, int qdepth)
+/**
+ * _scsih_change_queue_depth - setting device queue depth
+ * @sdev: scsi device struct
+ * @qdepth: requested queue depth
+ *
+ * Returns queue depth.
+ */
+static int
+_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth)
{
struct Scsi_Host *shost = sdev->host;
int max_depth;
max_depth = 1;
if (qdepth > max_depth)
qdepth = max_depth;
- scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
+ return scsi_change_queue_depth(sdev, qdepth);
}
-/**
- * _scsih_change_queue_depth - setting device queue depth
- * @sdev: scsi device struct
- * @qdepth: requested queue depth
- * @reason: SCSI_QDEPTH_DEFAULT/SCSI_QDEPTH_QFULL/SCSI_QDEPTH_RAMP_UP
- * (see include/scsi/scsi_host.h for definition)
- *
- * Returns queue depth.
- */
-static int
-_scsih_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
-{
- if (reason == SCSI_QDEPTH_DEFAULT || reason == SCSI_QDEPTH_RAMP_UP)
- _scsih_adjust_queue_depth(sdev, qdepth);
- else if (reason == SCSI_QDEPTH_QFULL)
- scsi_track_queue_full(sdev, qdepth);
- else
- return -EOPNOTSUPP;
-
- if (sdev->inquiry_len > 7)
- sdev_printk(KERN_INFO, sdev, "qdepth(%d), tagged(%d), " \
- "simple(%d), ordered(%d), scsi_level(%d), cmd_que(%d)\n",
- sdev->queue_depth, sdev->tagged_supported, sdev->simple_tags,
- sdev->ordered_tags, sdev->scsi_level,
- (sdev->inquiry[7] & 2) >> 1);
-
- return sdev->queue_depth;
-}
-
-/**
- * _scsih_change_queue_type - changing device queue tag type
- * @sdev: scsi device struct
- * @tag_type: requested tag type
- *
- * Returns queue tag type.
- */
-static int
-_scsih_change_queue_type(struct scsi_device *sdev, int tag_type)
-{
- if (sdev->tagged_supported) {
- scsi_set_tag_type(sdev, tag_type);
- if (tag_type)
- scsi_activate_tcq(sdev, sdev->queue_depth);
- else
- scsi_deactivate_tcq(sdev, sdev->queue_depth);
- } else
- tag_type = 0;
-
- return tag_type;
-}
-
-
/**
* _scsih_target_alloc - target add routine
* @starget: scsi target struct
raid_device->num_pds, ds);
- _scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT);
+ _scsih_change_queue_depth(sdev, qdepth);
/* raid transport support */
_scsih_set_level(sdev, raid_device->volume_type);
_scsih_display_sata_capabilities(ioc, handle, sdev);
- _scsih_change_queue_depth(sdev, qdepth, SCSI_QDEPTH_DEFAULT);
+ _scsih_change_queue_depth(sdev, qdepth);
if (ssp_target) {
sas_read_port_mode_page(sdev);
mpi_control = MPI2_SCSIIO_CONTROL_NODATATRANSFER;
/* set tags */
- if (!(sas_device_priv_data->flags & MPT_DEVICE_FLAGS_INIT)) {
- if (scmd->device->tagged_supported) {
- if (scmd->device->ordered_tags)
- mpi_control |= MPI2_SCSIIO_CONTROL_ORDEREDQ;
- else
- mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
- } else
- mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
- } else
- mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
+ mpi_control |= MPI2_SCSIIO_CONTROL_SIMPLEQ;
if ((sas_device_priv_data->flags & MPT_DEVICE_TLR_ON) &&
scmd->cmd_len != 32)
.scan_finished = _scsih_scan_finished,
.scan_start = _scsih_scan_start,
.change_queue_depth = _scsih_change_queue_depth,
- .change_queue_type = _scsih_change_queue_type,
+ .change_queue_type = scsi_change_queue_type,
.eh_abort_handler = _scsih_abort,
.eh_device_reset_handler = _scsih_dev_reset,
.eh_target_reset_handler = _scsih_target_reset,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = mpt3sas_host_attrs,
.sdev_attrs = mpt3sas_dev_attrs,
+ .track_queue_depth = 1,
};
/**
#include "mv_sas.h"
-static int lldd_max_execute_num = 1;
-module_param_named(collector, lldd_max_execute_num, int, S_IRUGO);
-MODULE_PARM_DESC(collector, "\n"
- "\tIf greater than one, tells the SAS Layer to run in Task Collector\n"
- "\tMode. If 1 or 0, tells the SAS Layer to run in Direct Mode.\n"
- "\tThe mvsas SAS LLDD supports both modes.\n"
- "\tDefault: 1 (Direct Mode).\n");
-
int interrupt_coalescing = 0x80;
static struct scsi_transport_template *mvs_stt;
-struct kmem_cache *mvs_task_list_cache;
static const struct mvs_chip_info mvs_chips[] = {
[chip_6320] = { 1, 2, 0x400, 17, 16, 6, 9, &mvs_64xx_dispatch, },
[chip_6440] = { 1, 4, 0x400, 17, 16, 6, 9, &mvs_64xx_dispatch, },
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
.shost_attrs = mvst_host_attrs,
+ .use_blk_tags = 1,
+ .track_queue_depth = 1,
};
static struct sas_domain_function_template mvs_transport_ops = {
sha->num_phys = nr_core * chip_info->n_phy;
- sha->lldd_max_execute_num = lldd_max_execute_num;
-
if (mvi->flags & MVF_FLAG_SOC)
can_queue = MVS_SOC_CAN_QUEUE;
else
can_queue = MVS_CHIP_SLOT_SZ;
- sha->lldd_queue_size = can_queue;
shost->sg_tablesize = min_t(u16, SG_ALL, MVS_MAX_SG);
shost->can_queue = can_queue;
mvi->shost->cmd_per_lun = MVS_QUEUE_SIZE;
if (!mvs_stt)
return -ENOMEM;
- mvs_task_list_cache = kmem_cache_create("mvs_task_list", sizeof(struct mvs_task_list),
- 0, SLAB_HWCACHE_ALIGN, NULL);
- if (!mvs_task_list_cache) {
- rc = -ENOMEM;
- mv_printk("%s: mvs_task_list_cache alloc failed! \n", __func__);
- goto err_out;
- }
-
rc = pci_register_driver(&mvs_pci_driver);
-
if (rc)
goto err_out;
{
pci_unregister_driver(&mvs_pci_driver);
sas_release_transport(mvs_stt);
- kmem_cache_destroy(mvs_task_list_cache);
}
struct device_attribute *mvst_host_attrs[] = {
return rc;
}
-static struct mvs_task_list *mvs_task_alloc_list(int *num, gfp_t gfp_flags)
-{
- struct mvs_task_list *first = NULL;
-
- for (; *num > 0; --*num) {
- struct mvs_task_list *mvs_list = kmem_cache_zalloc(mvs_task_list_cache, gfp_flags);
-
- if (!mvs_list)
- break;
-
- INIT_LIST_HEAD(&mvs_list->list);
- if (!first)
- first = mvs_list;
- else
- list_add_tail(&mvs_list->list, &first->list);
-
- }
-
- return first;
-}
-
-static inline void mvs_task_free_list(struct mvs_task_list *mvs_list)
-{
- LIST_HEAD(list);
- struct list_head *pos, *a;
- struct mvs_task_list *mlist = NULL;
-
- __list_add(&list, mvs_list->list.prev, &mvs_list->list);
-
- list_for_each_safe(pos, a, &list) {
- list_del_init(pos);
- mlist = list_entry(pos, struct mvs_task_list, list);
- kmem_cache_free(mvs_task_list_cache, mlist);
- }
-}
-
-static int mvs_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags,
+static int mvs_task_exec(struct sas_task *task, gfp_t gfp_flags,
struct completion *completion, int is_tmf,
struct mvs_tmf_task *tmf)
{
return rc;
}
-static int mvs_collector_task_exec(struct sas_task *task, const int num, gfp_t gfp_flags,
- struct completion *completion, int is_tmf,
- struct mvs_tmf_task *tmf)
+int mvs_queue_command(struct sas_task *task, gfp_t gfp_flags)
{
- struct domain_device *dev = task->dev;
- struct mvs_prv_info *mpi = dev->port->ha->lldd_ha;
- struct mvs_info *mvi = NULL;
- struct sas_task *t = task;
- struct mvs_task_list *mvs_list = NULL, *a;
- LIST_HEAD(q);
- int pass[2] = {0};
- u32 rc = 0;
- u32 n = num;
- unsigned long flags = 0;
-
- mvs_list = mvs_task_alloc_list(&n, gfp_flags);
- if (n) {
- printk(KERN_ERR "%s: mvs alloc list failed.\n", __func__);
- rc = -ENOMEM;
- goto free_list;
- }
-
- __list_add(&q, mvs_list->list.prev, &mvs_list->list);
-
- list_for_each_entry(a, &q, list) {
- a->task = t;
- t = list_entry(t->list.next, struct sas_task, list);
- }
-
- list_for_each_entry(a, &q , list) {
-
- t = a->task;
- mvi = ((struct mvs_device *)t->dev->lldd_dev)->mvi_info;
-
- spin_lock_irqsave(&mvi->lock, flags);
- rc = mvs_task_prep(t, mvi, is_tmf, tmf, &pass[mvi->id]);
- if (rc)
- dev_printk(KERN_ERR, mvi->dev, "mvsas exec failed[%d]!\n", rc);
- spin_unlock_irqrestore(&mvi->lock, flags);
- }
-
- if (likely(pass[0]))
- MVS_CHIP_DISP->start_delivery(mpi->mvi[0],
- (mpi->mvi[0]->tx_prod - 1) & (MVS_CHIP_SLOT_SZ - 1));
-
- if (likely(pass[1]))
- MVS_CHIP_DISP->start_delivery(mpi->mvi[1],
- (mpi->mvi[1]->tx_prod - 1) & (MVS_CHIP_SLOT_SZ - 1));
-
- list_del_init(&q);
-
-free_list:
- if (mvs_list)
- mvs_task_free_list(mvs_list);
-
- return rc;
-}
-
-int mvs_queue_command(struct sas_task *task, const int num,
- gfp_t gfp_flags)
-{
- struct mvs_device *mvi_dev = task->dev->lldd_dev;
- struct sas_ha_struct *sas = mvi_dev->mvi_info->sas;
-
- if (sas->lldd_max_execute_num < 2)
- return mvs_task_exec(task, num, gfp_flags, NULL, 0, NULL);
- else
- return mvs_collector_task_exec(task, num, gfp_flags, NULL, 0, NULL);
+ return mvs_task_exec(task, gfp_flags, NULL, 0, NULL);
}
static void mvs_slot_free(struct mvs_info *mvi, u32 rx_desc)
task->slow_task->timer.expires = jiffies + MVS_TASK_TIMEOUT*HZ;
add_timer(&task->slow_task->timer);
- res = mvs_task_exec(task, 1, GFP_KERNEL, NULL, 1, tmf);
+ res = mvs_task_exec(task, GFP_KERNEL, NULL, 1, tmf);
if (res) {
del_timer(&task->slow_task->timer);
extern struct mvs_info *tgt_mvi;
extern const struct mvs_dispatch mvs_64xx_dispatch;
extern const struct mvs_dispatch mvs_94xx_dispatch;
-extern struct kmem_cache *mvs_task_list_cache;
#define DEV_IS_EXPANDER(type) \
((type == SAS_EDGE_EXPANDER_DEVICE) || (type == SAS_FANOUT_EXPANDER_DEVICE))
int n_elem;
};
-struct mvs_task_list {
- struct sas_task *task;
- struct list_head list;
-};
-
-
/******************** function prototype *********************/
void mvs_get_sas_addr(void *buf, u32 buflen);
void mvs_tag_clear(struct mvs_info *mvi, u32 tag);
u32 off_hi, u64 sas_addr);
void mvs_scan_start(struct Scsi_Host *shost);
int mvs_scan_finished(struct Scsi_Host *shost, unsigned long time);
-int mvs_queue_command(struct sas_task *task, const int num,
- gfp_t gfp_flags);
+int mvs_queue_command(struct sas_task *task, gfp_t gfp_flags);
int mvs_abort_task(struct sas_task *task);
int mvs_abort_task_set(struct domain_device *dev, u8 *lun);
int mvs_clear_aca(struct domain_device *dev, u8 *lun);
if (depth_to_use > MAX_TAGS)
depth_to_use = MAX_TAGS;
- scsi_adjust_queue_depth(device,
- (device->tagged_supported ?
- MSG_SIMPLE_TAG : 0),
- depth_to_use);
+ scsi_change_queue_depth(device, depth_to_use);
/*
** Since the queue depth is not tunable under Linux,
# Copyright (C) 2008 Panasas Inc. All rights reserved.
#
# Authors:
-# Boaz Harrosh <bharrosh@panasas.com>
+# Boaz Harrosh <ooo@electrozaur.com>
# Benny Halevy <bhalevy@panasas.com>
#
# This program is free software; you can redistribute it and/or modify
# Copyright (C) 2008 Panasas Inc. All rights reserved.
#
# Authors:
-# Boaz Harrosh <bharrosh@panasas.com>
+# Boaz Harrosh <ooo@electrozaur.com>
# Benny Halevy <bhalevy@panasas.com>
#
# This program is free software; you can redistribute it and/or modify
* Copyright (C) 2008 Panasas Inc. All rights reserved.
*
* Authors:
- * Boaz Harrosh <bharrosh@panasas.com>
+ * Boaz Harrosh <ooo@electrozaur.com>
* Benny Halevy <bhalevy@panasas.com>
*
* This program is free software; you can redistribute it and/or modify
* Copyright (C) 2008 Panasas Inc. All rights reserved.
*
* Authors:
- * Boaz Harrosh <bharrosh@panasas.com>
+ * Boaz Harrosh <ooo@electrozaur.com>
* Benny Halevy <bhalevy@panasas.com>
*
* This program is free software; you can redistribute it and/or modify
enum { OSD_REQ_RETRIES = 1 };
-MODULE_AUTHOR("Boaz Harrosh <bharrosh@panasas.com>");
+MODULE_AUTHOR("Boaz Harrosh <ooo@electrozaur.com>");
MODULE_DESCRIPTION("open-osd initiator library libosd.ko");
MODULE_LICENSE("GPL");
* Copyright (C) 2008 Panasas Inc. All rights reserved.
*
* Authors:
- * Boaz Harrosh <bharrosh@panasas.com>
+ * Boaz Harrosh <ooo@electrozaur.com>
* Benny Halevy <bhalevy@panasas.com>
*
* This program is free software; you can redistribute it and/or modify
static const char osd_name[] = "osd";
static const char *osd_version_string = "open-osd 0.2.1";
-MODULE_AUTHOR("Boaz Harrosh <bharrosh@panasas.com>");
+MODULE_AUTHOR("Boaz Harrosh <ooo@electrozaur.com>");
MODULE_DESCRIPTION("open-osd Upper-Layer-Driver osd.ko");
MODULE_LICENSE("GPL");
MODULE_ALIAS_CHARDEV_MAJOR(SCSI_OSD_MAJOR);
*/
static struct scsi_driver osd_driver = {
- .owner = THIS_MODULE,
.gendrv = {
.name = osd_name,
+ .owner = THIS_MODULE,
.probe = osd_probe,
.remove = osd_remove,
}
static int osst_remove(struct device *);
static struct scsi_driver osst_template = {
- .owner = THIS_MODULE,
.gendrv = {
.name = "osst",
+ .owner = THIS_MODULE,
.probe = osst_probe,
.remove = osst_remove,
}
SRpnt->cmd[0], SRpnt->cmd[1], SRpnt->cmd[2],
SRpnt->cmd[3], SRpnt->cmd[4], SRpnt->cmd[5]);
if (scode) printk(OSST_DEB_MSG "%s:D: Sense: %02x, ASC: %02x, ASCQ: %02x\n",
- name, scode, sense[12], sense[13]);
+ name, scode, sense[12], sense[13]);
if (cmdstatp->have_sense)
- __scsi_print_sense("osst ", SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
+ __scsi_print_sense(STp->device, name,
+ SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
}
else
#endif
SRpnt->cmd[0] != TEST_UNIT_READY)) { /* Abnormal conditions for tape */
if (cmdstatp->have_sense) {
printk(KERN_WARNING "%s:W: Command with sense data:\n", name);
- __scsi_print_sense("osst ", SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
+ __scsi_print_sense(STp->device, name,
+ SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
}
else {
static int notyetprinted = 1;
/* Lock or unlock the drive door. Don't use when struct osst_request allocated. */
static int do_door_lock(struct osst_tape * STp, int do_lock)
{
- int retval, cmd;
+ int retval;
- cmd = do_lock ? SCSI_IOCTL_DOORLOCK : SCSI_IOCTL_DOORUNLOCK;
#if DEBUG
printk(OSST_DEB_MSG "%s:D: %socking drive door.\n", tape_name(STp), do_lock ? "L" : "Unl");
#endif
- retval = scsi_ioctl(STp->device, cmd, NULL);
- if (!retval) {
+
+ retval = scsi_set_medium_removal(STp->device,
+ do_lock ? SCSI_REMOVAL_PREVENT : SCSI_REMOVAL_ALLOW);
+ if (!retval)
STp->door_locked = do_lock ? ST_LOCKED_EXPLICIT : ST_UNLOCKED;
- }
- else {
+ else
STp->door_locked = ST_LOCK_FAILS;
- }
return retval;
}
* may try and take the device offline, in which case all further
* access to the device is prohibited.
*/
- if( !scsi_block_when_processing_errors(STp->device) ) {
- retval = (-ENXIO);
+ retval = scsi_ioctl_block_when_processing_errors(STp->device, cmd_in,
+ file->f_flags & O_NDELAY);
+ if (retval)
goto out;
- }
cmd_type = _IOC_TYPE(cmd_in);
cmd_nr = _IOC_NR(cmd_in);
-#define AUTOSENSE
#define PSEUDO_DMA
-#define FOO
#define UNSAFE /* Not unsafe for PAS16 -- use it */
#define PDEBUG 0
* Media Vision
* (510) 770-8600
* (800) 348-7116
- *
- * and
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
*/
/*
- * Options :
- * AUTOSENSE - if defined, REQUEST SENSE will be performed automatically
- * for commands that return with a CHECK CONDITION status.
- *
- * LIMIT_TRANSFERSIZE - if defined, limit the pseudo-dma transfers to 512
- * bytes at a time. Since interrupts are disabled by default during
- * these transfers, we might need this to give reasonable interrupt
- * service time if the transfer size gets too large.
- *
- * PSEUDO_DMA - enables PSEUDO-DMA hardware, should give a 3-4X performance
- * increase compared to polled I/O.
- *
- * PARITY - enable parity checking. Not supported.
- *
- * SCSI2 - enable support for SCSI-II tagged queueing. Untested.
- *
- * UNSAFE - leave interrupts enabled during pseudo-DMA transfers. This
- * parameter comes from the NCR5380 code. It is NOT unsafe with
- * the PAS16 and you should use it. If you don't you will have
- * a problem with dropped characters during high speed
- * communications during SCSI transfers. If you really don't
- * want to use UNSAFE you can try defining LIMIT_TRANSFERSIZE or
- * twiddle with the transfer size in the high level code.
- *
- * USLEEP - enable support for devices that don't disconnect. Untested.
- *
* The card is detected and initialized in one of several ways :
* 1. Autoprobe (default) - There are many different models of
* the Pro Audio Spectrum/Studio 16, and I only have one of
* If you have problems with your card not being recognized, use
* the LILO command line override. Try to get it recognized without
* interrupts. Ie, for a board at the default 0x388 base port,
- * boot: linux pas16=0x388,255
+ * boot: linux pas16=0x388,0
*
- * SCSI_IRQ_NONE (255) should be specified for no interrupt,
+ * NO_IRQ (0) should be specified for no interrupt,
* IRQ_AUTO (254) to autoprobe for an IRQ line if overridden
* on the command line.
- *
- * (IRQ_AUTO == 254, SCSI_IRQ_NONE == 255 in NCR5380.h)
*/
#include <linux/module.h>
#include <linux/stat.h>
#include <linux/init.h>
-#include "scsi.h"
#include <scsi/scsi_host.h>
#include "pas16.h"
#define AUTOPROBE_IRQ
#include "NCR5380.h"
-static int pas_maxi = 0;
-static int pas_wmaxi = 0;
static unsigned short pas16_addr = 0;
static int pas16_irq = 0;
}
+#ifndef MODULE
/*
* Function : pas16_setup(char *str, int *ints)
*
*
*/
-void __init pas16_setup(char *str, int *ints)
+static int __init pas16_setup(char *str)
{
static int commandline_current = 0;
int i;
+ int ints[10];
+
+ get_options(str, ARRAY_SIZE(ints), ints);
if (ints[0] != 2)
printk("pas16_setup : usage pas16=io_port,irq\n");
else
}
++commandline_current;
}
+ return 1;
}
+__setup("pas16=", pas16_setup);
+#endif
+
/*
* Function : int pas16_detect(struct scsi_host_template * tpnt)
*
*
*/
-int __init pas16_detect(struct scsi_host_template * tpnt)
+static int __init pas16_detect(struct scsi_host_template *tpnt)
{
static int current_override = 0;
static unsigned short current_base = 0;
unsigned short io_port;
int count;
- tpnt->proc_name = "pas16";
- tpnt->show_info = pas16_show_info;
- tpnt->write_info = pas16_write_info;
-
if (pas16_addr != 0) {
overrides[0].io_port = pas16_addr;
/*
else
instance->irq = NCR5380_probe_irq(instance, PAS16_IRQS);
- if (instance->irq != SCSI_IRQ_NONE)
+ /* Compatibility with documented NCR5380 kernel parameters */
+ if (instance->irq == 255)
+ instance->irq = NO_IRQ;
+
+ if (instance->irq != NO_IRQ)
if (request_irq(instance->irq, pas16_intr, 0,
"pas16", instance)) {
printk("scsi%d : IRQ%d not free, interrupts disabled\n",
instance->host_no, instance->irq);
- instance->irq = SCSI_IRQ_NONE;
+ instance->irq = NO_IRQ;
}
- if (instance->irq == SCSI_IRQ_NONE) {
+ if (instance->irq == NO_IRQ) {
printk("scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
printk("scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
/* Disable 5380 interrupts, leave drive params the same */
printk("scsi%d : irq = %d\n", instance->host_no, instance->irq);
#endif
- printk("scsi%d : at 0x%04x", instance->host_no, (int)
- instance->io_port);
- if (instance->irq == SCSI_IRQ_NONE)
- printk (" interrupts disabled");
- else
- printk (" irq %d", instance->irq);
- printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
- CAN_QUEUE, CMD_PER_LUN, PAS16_PUBLIC_RELEASE);
- NCR5380_print_options(instance);
- printk("\n");
-
++current_override;
++count;
}
* and matching the H_C_S coordinates to what DOS uses.
*/
-int pas16_biosparam(struct scsi_device *sdev, struct block_device *dev,
- sector_t capacity, int * ip)
+static int pas16_biosparam(struct scsi_device *sdev, struct block_device *dev,
+ sector_t capacity, int *ip)
{
int size = capacity;
ip[0] = 64;
P_DATA_REG_OFFSET);
register int i = len;
int ii = 0;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
while ( !(inb(instance->io_port + P_STATUS_REG_OFFSET) & P_ST_RDY) )
++ii;
instance->host_no);
return -1;
}
- if (ii > pas_maxi)
- pas_maxi = ii;
+ if (ii > hostdata->spin_max_r)
+ hostdata->spin_max_r = ii;
return 0;
}
register unsigned short reg = (instance->io_port + P_DATA_REG_OFFSET);
register int i = len;
int ii = 0;
+ struct NCR5380_hostdata *hostdata = shost_priv(instance);
while ( !((inb(instance->io_port + P_STATUS_REG_OFFSET)) & P_ST_RDY) )
++ii;
instance->host_no);
return -1;
}
- if (ii > pas_maxi)
- pas_wmaxi = ii;
+ if (ii > hostdata->spin_max_w)
+ hostdata->spin_max_w = ii;
return 0;
}
static int pas16_release(struct Scsi_Host *shost)
{
- if (shost->irq)
+ if (shost->irq != NO_IRQ)
free_irq(shost->irq, shost);
NCR5380_exit(shost);
if (shost->io_port && shost->n_io_port)
.name = "Pro Audio Spectrum-16 SCSI",
.detect = pas16_detect,
.release = pas16_release,
+ .proc_name = "pas16",
+ .show_info = pas16_show_info,
+ .write_info = pas16_write_info,
+ .info = pas16_info,
.queuecommand = pas16_queue_command,
.eh_abort_handler = pas16_abort,
.eh_bus_reset_handler = pas16_bus_reset,
* Media Vision
* (510) 770-8600
* (800) 348-7116
- *
- * and
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
*/
#ifndef PAS16_H
#define PAS16_H
-#define PAS16_PUBLIC_RELEASE 3
-
#define PDEBUG_INIT 0x1
#define PDEBUG_TRANSFER 0x2
#ifndef ASM
-static int pas16_abort(Scsi_Cmnd *);
-static int pas16_biosparam(struct scsi_device *, struct block_device *,
- sector_t, int*);
-static int pas16_detect(struct scsi_host_template *);
-static int pas16_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
-static int pas16_bus_reset(Scsi_Cmnd *);
#ifndef CMD_PER_LUN
#define CMD_PER_LUN 2
#define NCR5380_queue_command pas16_queue_command
#define NCR5380_abort pas16_abort
#define NCR5380_bus_reset pas16_bus_reset
+#define NCR5380_info pas16_info
#define NCR5380_show_info pas16_show_info
#define NCR5380_write_info pas16_write_info
.target_destroy = sas_target_destroy,
.ioctl = sas_ioctl,
.shost_attrs = pm8001_host_attrs,
+ .use_blk_tags = 1,
+ .track_queue_depth = 1,
};
/**
sha->lldd_module = THIS_MODULE;
sha->sas_addr = &pm8001_ha->sas_addr[0];
sha->num_phys = chip_info->n_phy;
- sha->lldd_max_execute_num = 1;
- sha->lldd_queue_size = PM8001_CAN_QUEUE;
sha->core.shost = shost;
}
*/
#define DEV_IS_GONE(pm8001_dev) \
((!pm8001_dev || (pm8001_dev->dev_type == SAS_PHY_UNUSED)))
-static int pm8001_task_exec(struct sas_task *task, const int num,
+static int pm8001_task_exec(struct sas_task *task,
gfp_t gfp_flags, int is_tmf, struct pm8001_tmf_task *tmf)
{
struct domain_device *dev = task->dev;
struct sas_task *t = task;
struct pm8001_ccb_info *ccb;
u32 tag = 0xdeadbeef, rc, n_elem = 0;
- u32 n = num;
unsigned long flags = 0;
if (!dev->port) {
spin_unlock_irqrestore(&pm8001_ha->lock, flags);
t->task_done(t);
spin_lock_irqsave(&pm8001_ha->lock, flags);
- if (n > 1)
- t = list_entry(t->list.next,
- struct sas_task, list);
continue;
} else {
struct task_status_struct *ts = &t->task_status;
ts->resp = SAS_TASK_UNDELIVERED;
ts->stat = SAS_PHY_DOWN;
t->task_done(t);
- if (n > 1)
- t = list_entry(t->list.next,
- struct sas_task, list);
continue;
}
}
t->task_state_flags |= SAS_TASK_AT_INITIATOR;
spin_unlock(&t->task_state_lock);
pm8001_dev->running_req++;
- if (n > 1)
- t = list_entry(t->list.next, struct sas_task, list);
- } while (--n);
+ } while (0);
rc = 0;
goto out_done;
* pm8001_queue_command - register for upper layer used, all IO commands sent
* to HBA are from this interface.
* @task: the task to be execute.
- * @num: if can_queue great than 1, the task can be queued up. for SMP task,
- * we always execute one one time
* @gfp_flags: gfp_flags
*/
-int pm8001_queue_command(struct sas_task *task, const int num,
- gfp_t gfp_flags)
+int pm8001_queue_command(struct sas_task *task, gfp_t gfp_flags)
{
- return pm8001_task_exec(task, num, gfp_flags, 0, NULL);
+ return pm8001_task_exec(task, gfp_flags, 0, NULL);
}
/**
task->slow_task->timer.expires = jiffies + PM8001_TASK_TIMEOUT*HZ;
add_timer(&task->slow_task->timer);
- res = pm8001_task_exec(task, 1, GFP_KERNEL, 1, tmf);
+ res = pm8001_task_exec(task, GFP_KERNEL, 1, tmf);
if (res) {
del_timer(&task->slow_task->timer);
void *funcdata);
void pm8001_scan_start(struct Scsi_Host *shost);
int pm8001_scan_finished(struct Scsi_Host *shost, unsigned long time);
-int pm8001_queue_command(struct sas_task *task, const int num,
- gfp_t gfp_flags);
+int pm8001_queue_command(struct sas_task *task, gfp_t gfp_flags);
int pm8001_abort_task(struct sas_task *task);
int pm8001_abort_task_set(struct domain_device *dev, u8 *lun);
int pm8001_clear_aca(struct domain_device *dev, u8 *lun);
PMCRAID_VSET_MAX_SECTORS);
}
- if (scsi_dev->tagged_supported &&
- (RES_IS_GSCSI(res->cfg_entry) || RES_IS_VSET(res->cfg_entry))) {
- scsi_activate_tcq(scsi_dev, scsi_dev->queue_depth);
- scsi_adjust_queue_depth(scsi_dev, MSG_SIMPLE_TAG,
- scsi_dev->host->cmd_per_lun);
- } else {
- scsi_adjust_queue_depth(scsi_dev, 0,
- scsi_dev->host->cmd_per_lun);
- }
+ /*
+ * We never want to report TCQ support for these types of devices.
+ */
+ if (!RES_IS_GSCSI(res->cfg_entry) && !RES_IS_VSET(res->cfg_entry))
+ scsi_dev->tagged_supported = 0;
return 0;
}
* pmcraid_change_queue_depth - Change the device's queue depth
* @scsi_dev: scsi device struct
* @depth: depth to set
- * @reason: calling context
*
* Return value
* actual depth set
*/
-static int pmcraid_change_queue_depth(struct scsi_device *scsi_dev, int depth,
- int reason)
+static int pmcraid_change_queue_depth(struct scsi_device *scsi_dev, int depth)
{
- if (reason != SCSI_QDEPTH_DEFAULT)
- return -EOPNOTSUPP;
-
if (depth > PMCRAID_MAX_CMD_PER_LUN)
depth = PMCRAID_MAX_CMD_PER_LUN;
-
- scsi_adjust_queue_depth(scsi_dev, scsi_get_tag_type(scsi_dev), depth);
-
- return scsi_dev->queue_depth;
+ return scsi_change_queue_depth(scsi_dev, depth);
}
-/**
- * pmcraid_change_queue_type - Change the device's queue type
- * @scsi_dev: scsi device struct
- * @tag: type of tags to use
- *
- * Return value:
- * actual queue type set
- */
-static int pmcraid_change_queue_type(struct scsi_device *scsi_dev, int tag)
-{
- struct pmcraid_resource_entry *res;
-
- res = (struct pmcraid_resource_entry *)scsi_dev->hostdata;
-
- if ((res) && scsi_dev->tagged_supported &&
- (RES_IS_GSCSI(res->cfg_entry) || RES_IS_VSET(res->cfg_entry))) {
- scsi_set_tag_type(scsi_dev, tag);
-
- if (tag)
- scsi_activate_tcq(scsi_dev, scsi_dev->queue_depth);
- else
- scsi_deactivate_tcq(scsi_dev, scsi_dev->queue_depth);
- } else
- tag = 0;
-
- return tag;
-}
-
-
/**
* pmcraid_init_cmdblk - initializes a command block
*
return pmcraid_reset_bringup(pinstance) == 0 ? SUCCESS : FAILED;
}
-/**
- * pmcraid_task_attributes - Translate SPI Q-Tags to task attributes
- * @scsi_cmd: scsi command struct
- *
- * Return value
- * number of tags or 0 if the task is not tagged
- */
-static u8 pmcraid_task_attributes(struct scsi_cmnd *scsi_cmd)
-{
- char tag[2];
- u8 rc = 0;
-
- if (scsi_populate_tag_msg(scsi_cmd, tag)) {
- switch (tag[0]) {
- case MSG_SIMPLE_TAG:
- rc = TASK_TAG_SIMPLE;
- break;
- case MSG_HEAD_TAG:
- rc = TASK_TAG_QUEUE_HEAD;
- break;
- case MSG_ORDERED_TAG:
- rc = TASK_TAG_ORDERED;
- break;
- };
- }
-
- return rc;
-}
-
-
/**
* pmcraid_init_ioadls - initializes IOADL related fields in IOARCB
* @cmd: pmcraid command struct
}
ioarcb->request_flags0 |= NO_LINK_DESCS;
- ioarcb->request_flags1 |= pmcraid_task_attributes(scsi_cmd);
+
+ if (scsi_cmd->flags & SCMD_TAGGED)
+ ioarcb->request_flags1 |= TASK_TAG_SIMPLE;
if (RES_IS_GSCSI(res->cfg_entry))
ioarcb->request_flags1 |= DELAY_AFTER_RESET;
.slave_configure = pmcraid_slave_configure,
.slave_destroy = pmcraid_slave_destroy,
.change_queue_depth = pmcraid_change_queue_depth,
- .change_queue_type = pmcraid_change_queue_type,
+ .change_queue_type = scsi_change_queue_type,
.can_queue = PMCRAID_MAX_IO_CMD,
.this_id = -1,
.sg_tablesize = PMCRAID_MAX_IOADLS,
.cmd_per_lun = PMCRAID_MAX_CMD_PER_LUN,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = pmcraid_host_attrs,
- .proc_name = PMCRAID_DRIVER_NAME
+ .proc_name = PMCRAID_DRIVER_NAME,
+ .use_blk_tags = 1,
};
/*
unsigned char opcode;
int res;
-#ifdef DEBUG
- scsi_print_command(cmd);
-#endif
-
priv->curr_cmd = cmd;
cmd->scsi_done = done;
if (device->tagged_supported &&
(ha->bus_settings[bus].qtag_enables & (BIT_0 << target))) {
- scsi_adjust_queue_depth(device, MSG_ORDERED_TAG,
- ha->bus_settings[bus].hiwat);
+ scsi_change_queue_depth(device, ha->bus_settings[bus].hiwat);
} else {
- scsi_adjust_queue_depth(device, 0, default_depth);
+ scsi_change_queue_depth(device, default_depth);
}
nv->bus[bus].target[target].parameter.enable_sync = device->sdtr;
extern int qla8044_rd_direct(struct scsi_qla_host *vha, const uint32_t crb_reg);
extern void qla8044_wr_direct(struct scsi_qla_host *vha,
const uint32_t crb_reg, const uint32_t value);
-extern inline void qla8044_set_qsnt_ready(struct scsi_qla_host *vha);
-extern inline void qla8044_need_reset_handler(struct scsi_qla_host *vha);
extern int qla8044_device_state_handler(struct scsi_qla_host *vha);
extern void qla8044_clear_qsnt_ready(struct scsi_qla_host *vha);
extern void qla8044_clear_drv_active(struct qla_hw_data *);
struct qla_hw_data *ha;
struct req_que *req;
struct rsp_que *rsp;
- char tag[2];
/* Setup device pointers. */
ret = 0;
/* Set target ID and LUN number*/
SET_TARGET_ID(ha, cmd_pkt->target, sp->fcport->loop_id);
cmd_pkt->lun = cpu_to_le16(cmd->device->lun);
-
- /* Update tagged queuing modifier */
- if (scsi_populate_tag_msg(cmd, tag)) {
- switch (tag[0]) {
- case HEAD_OF_QUEUE_TAG:
- cmd_pkt->control_flags =
- __constant_cpu_to_le16(CF_HEAD_TAG);
- break;
- case ORDERED_QUEUE_TAG:
- cmd_pkt->control_flags =
- __constant_cpu_to_le16(CF_ORDERED_TAG);
- break;
- default:
- cmd_pkt->control_flags =
- __constant_cpu_to_le16(CF_SIMPLE_TAG);
- break;
- }
- } else {
- cmd_pkt->control_flags = __constant_cpu_to_le16(CF_SIMPLE_TAG);
- }
+ cmd_pkt->control_flags = __constant_cpu_to_le16(CF_SIMPLE_TAG);
/* Load SCSI command packet. */
memcpy(cmd_pkt->scsi_cdb, cmd->cmnd, cmd->cmd_len);
uint16_t fcp_cmnd_len;
struct fcp_cmnd *fcp_cmnd;
dma_addr_t crc_ctx_dma;
- char tag[2];
cmd = GET_CMD_SP(sp);
cmd_pkt->fcp_cmnd_dseg_address[1] = cpu_to_le32(
MSD(crc_ctx_dma + CRC_CONTEXT_FCPCMND_OFF));
fcp_cmnd->task_management = 0;
-
- /*
- * Update tagged queuing modifier if using command tag queuing
- */
- if (scsi_populate_tag_msg(cmd, tag)) {
- switch (tag[0]) {
- case HEAD_OF_QUEUE_TAG:
- fcp_cmnd->task_attribute = TSK_HEAD_OF_QUEUE;
- break;
- case ORDERED_QUEUE_TAG:
- fcp_cmnd->task_attribute = TSK_ORDERED;
- break;
- default:
- fcp_cmnd->task_attribute = TSK_SIMPLE;
- break;
- }
- } else {
- fcp_cmnd->task_attribute = TSK_SIMPLE;
- }
+ fcp_cmnd->task_attribute = TSK_SIMPLE;
cmd_pkt->fcp_rsp_dseg_len = 0; /* Let response come in status iocb */
struct scsi_cmnd *cmd = GET_CMD_SP(sp);
struct scsi_qla_host *vha = sp->fcport->vha;
struct qla_hw_data *ha = vha->hw;
- char tag[2];
/* Setup device pointers. */
ret = 0;
int_to_scsilun(cmd->device->lun, &cmd_pkt->lun);
host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun));
- /* Update tagged queuing modifier -- default is TSK_SIMPLE (0). */
- if (scsi_populate_tag_msg(cmd, tag)) {
- switch (tag[0]) {
- case HEAD_OF_QUEUE_TAG:
- cmd_pkt->task = TSK_HEAD_OF_QUEUE;
- break;
- case ORDERED_QUEUE_TAG:
- cmd_pkt->task = TSK_ORDERED;
- break;
- default:
- cmd_pkt->task = TSK_SIMPLE;
- break;
- }
- } else {
- cmd_pkt->task = TSK_SIMPLE;
- }
+ cmd_pkt->task = TSK_SIMPLE;
/* Load SCSI command packet. */
memcpy(cmd_pkt->fcp_cdb, cmd->cmnd, cmd->cmd_len);
struct qla_hw_data *ha = vha->hw;
struct req_que *req = NULL;
struct rsp_que *rsp = NULL;
- char tag[2];
/* Setup device pointers. */
ret = 0;
else if (cmd->sc_data_direction == DMA_FROM_DEVICE)
ctx->fcp_cmnd->additional_cdb_len |= 2;
- /*
- * Update tagged queuing modifier -- default is TSK_SIMPLE (0).
- */
- if (scsi_populate_tag_msg(cmd, tag)) {
- switch (tag[0]) {
- case HEAD_OF_QUEUE_TAG:
- ctx->fcp_cmnd->task_attribute =
- TSK_HEAD_OF_QUEUE;
- break;
- case ORDERED_QUEUE_TAG:
- ctx->fcp_cmnd->task_attribute =
- TSK_ORDERED;
- break;
- }
- }
-
/* Populate the FCP_PRIO. */
if (ha->flags.fcp_prio_enabled)
ctx->fcp_cmnd->task_attribute |=
host_to_fcp_swap((uint8_t *)&cmd_pkt->lun,
sizeof(cmd_pkt->lun));
- /*
- * Update tagged queuing modifier -- default is TSK_SIMPLE (0).
- */
- if (scsi_populate_tag_msg(cmd, tag)) {
- switch (tag[0]) {
- case HEAD_OF_QUEUE_TAG:
- cmd_pkt->task = TSK_HEAD_OF_QUEUE;
- break;
- case ORDERED_QUEUE_TAG:
- cmd_pkt->task = TSK_ORDERED;
- break;
- }
- }
-
/* Populate the FCP_PRIO. */
if (ha->flags.fcp_prio_enabled)
cmd_pkt->task |= sp->fcport->fcp_prio << 3;
struct cmd_type_7_fx00 *cmd_pkt;
struct cmd_type_7_fx00 lcmd_pkt;
struct scsi_lun llun;
- char tag[2];
/* Setup device pointers. */
ret = 0;
host_to_adap((uint8_t *)&llun, (uint8_t *)&lcmd_pkt.lun,
sizeof(lcmd_pkt.lun));
- /* Update tagged queuing modifier -- default is TSK_SIMPLE (0). */
- if (scsi_populate_tag_msg(cmd, tag)) {
- switch (tag[0]) {
- case HEAD_OF_QUEUE_TAG:
- lcmd_pkt.task = TSK_HEAD_OF_QUEUE;
- break;
- case ORDERED_QUEUE_TAG:
- lcmd_pkt.task = TSK_ORDERED;
- break;
- }
- }
-
/* Load SCSI command packet. */
host_to_adap(cmd->cmnd, lcmd_pkt.fcp_cdb, sizeof(lcmd_pkt.fcp_cdb));
lcmd_pkt.byte_count = cpu_to_le32((uint32_t)scsi_bufflen(cmd));
return;
}
-inline void
+static inline void
qla8044_set_qsnt_ready(struct scsi_qla_host *vha)
{
uint32_t qsnt_state;
static int qla2xxx_eh_bus_reset(struct scsi_cmnd *);
static int qla2xxx_eh_host_reset(struct scsi_cmnd *);
-static int qla2x00_change_queue_depth(struct scsi_device *, int, int);
-static int qla2x00_change_queue_type(struct scsi_device *, int);
static void qla2x00_clear_drv_active(struct qla_hw_data *);
static void qla2x00_free_device(scsi_qla_host_t *);
static void qla83xx_disable_laser(scsi_qla_host_t *vha);
.slave_destroy = qla2xxx_slave_destroy,
.scan_finished = qla2xxx_scan_finished,
.scan_start = qla2xxx_scan_start,
- .change_queue_depth = qla2x00_change_queue_depth,
- .change_queue_type = qla2x00_change_queue_type,
+ .change_queue_depth = scsi_change_queue_depth,
+ .change_queue_type = scsi_change_queue_type,
.this_id = -1,
.cmd_per_lun = 3,
.use_clustering = ENABLE_CLUSTERING,
.shost_attrs = qla2x00_host_attrs,
.supported_mode = MODE_INITIATOR,
+ .use_blk_tags = 1,
+ .track_queue_depth = 1,
};
static struct scsi_transport_template *qla2xxx_transport_template = NULL;
if (IS_T10_PI_CAPABLE(vha->hw))
blk_queue_update_dma_alignment(sdev->request_queue, 0x7);
- if (sdev->tagged_supported)
- scsi_activate_tcq(sdev, req->max_q_depth);
- else
- scsi_deactivate_tcq(sdev, req->max_q_depth);
+ scsi_change_queue_depth(sdev, req->max_q_depth);
return 0;
}
sdev->hostdata = NULL;
}
-static void qla2x00_handle_queue_full(struct scsi_device *sdev, int qdepth)
-{
- fc_port_t *fcport = (struct fc_port *) sdev->hostdata;
-
- if (!scsi_track_queue_full(sdev, qdepth))
- return;
-
- ql_dbg(ql_dbg_io, fcport->vha, 0x3029,
- "Queue depth adjusted-down to %d for nexus=%ld:%d:%llu.\n",
- sdev->queue_depth, fcport->vha->host_no, sdev->id, sdev->lun);
-}
-
-static void qla2x00_adjust_sdev_qdepth_up(struct scsi_device *sdev, int qdepth)
-{
- fc_port_t *fcport = sdev->hostdata;
- struct scsi_qla_host *vha = fcport->vha;
- struct req_que *req = NULL;
-
- req = vha->req;
- if (!req)
- return;
-
- if (req->max_q_depth <= sdev->queue_depth || req->max_q_depth < qdepth)
- return;
-
- if (sdev->ordered_tags)
- scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, qdepth);
- else
- scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, qdepth);
-
- ql_dbg(ql_dbg_io, vha, 0x302a,
- "Queue depth adjusted-up to %d for nexus=%ld:%d:%llu.\n",
- sdev->queue_depth, fcport->vha->host_no, sdev->id, sdev->lun);
-}
-
-static int
-qla2x00_change_queue_depth(struct scsi_device *sdev, int qdepth, int reason)
-{
- switch (reason) {
- case SCSI_QDEPTH_DEFAULT:
- scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
- break;
- case SCSI_QDEPTH_QFULL:
- qla2x00_handle_queue_full(sdev, qdepth);
- break;
- case SCSI_QDEPTH_RAMP_UP:
- qla2x00_adjust_sdev_qdepth_up(sdev, qdepth);
- break;
- default:
- return -EOPNOTSUPP;
- }
-
- return sdev->queue_depth;
-}
-
-static int
-qla2x00_change_queue_type(struct scsi_device *sdev, int tag_type)
-{
- if (sdev->tagged_supported) {
- scsi_set_tag_type(sdev, tag_type);
- if (tag_type)
- scsi_activate_tcq(sdev, sdev->queue_depth);
- else
- scsi_deactivate_tcq(sdev, sdev->queue_depth);
- } else
- tag_type = 0;
-
- return tag_type;
-}
-
/**
* qla2x00_config_dma_addressing() - Configure OS DMA addressing method.
* @ha: HA context
struct qla_tgt_cmd *cmd);
static void qlt_alloc_qfull_cmd(struct scsi_qla_host *vha,
struct atio_from_isp *atio, uint16_t status, int qfull);
+static void qlt_disable_vha(struct scsi_qla_host *vha);
/*
* Global Variables
*/
spin_unlock_irqrestore(&vha->hw->tgt.q_full_lock, flags);
}
-void qlt_24xx_atio_pkt_all_vps(struct scsi_qla_host *vha,
+static void qlt_24xx_atio_pkt_all_vps(struct scsi_qla_host *vha,
struct atio_from_isp *atio)
{
ql_dbg(ql_dbg_tgt, vha, 0xe072,
#if 0 /* FIXME: Re-enable Global event handling.. */
/* Global event */
atomic_inc(&ha->tgt.qla_tgt->tgt_global_resets_count);
- qlt_clear_tgt_db(ha->tgt.qla_tgt, 1);
+ qlt_clear_tgt_db(ha->tgt.qla_tgt);
if (!list_empty(&ha->tgt.qla_tgt->sess_list)) {
sess = list_entry(ha->tgt.qla_tgt->sess_list.next,
typeof(*sess), sess_list_entry);
}
/* ha->hardware_lock supposed to be held on entry */
-static void qlt_clear_tgt_db(struct qla_tgt *tgt, bool local_only)
+static void qlt_clear_tgt_db(struct qla_tgt *tgt)
{
struct qla_tgt_sess *sess;
mutex_lock(&vha->vha_tgt.tgt_mutex);
spin_lock_irqsave(&ha->hardware_lock, flags);
tgt->tgt_stop = 1;
- qlt_clear_tgt_db(tgt, true);
+ qlt_clear_tgt_db(tgt);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
mutex_unlock(&vha->vha_tgt.tgt_mutex);
mutex_unlock(&qla_tgt_mutex);
return -1;
}
-static inline void qlt_unmap_sg(struct scsi_qla_host *vha,
- struct qla_tgt_cmd *cmd)
+static void qlt_unmap_sg(struct scsi_qla_host *vha, struct qla_tgt_cmd *cmd)
{
struct qla_hw_data *ha = vha->hw;
- BUG_ON(!cmd->sg_mapped);
+ if (!cmd->sg_mapped)
+ return;
+
pci_unmap_sg(ha->pdev, cmd->sg, cmd->sg_cnt, cmd->dma_data_direction);
cmd->sg_mapped = 0;
return 0;
out_unmap_unlock:
- if (cmd->sg_mapped)
- qlt_unmap_sg(vha, cmd);
+ qlt_unmap_sg(vha, cmd);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return res;
return res;
out_unlock_free_unmap:
- if (cmd->sg_mapped)
- qlt_unmap_sg(vha, cmd);
+ qlt_unmap_sg(vha, cmd);
spin_unlock_irqrestore(&ha->hardware_lock, flags);
return res;
if (!ha_locked && !in_interrupt())
msleep(250); /* just in case */
- if (cmd->sg_mapped)
- qlt_unmap_sg(vha, cmd);
+ qlt_unmap_sg(vha, cmd);
vha->hw->tgt.tgt_ops->free_cmd(cmd);
}
return;
tfo = se_cmd->se_tfo;
cmd->cmd_sent_to_fw = 0;
- if (cmd->sg_mapped)
- qlt_unmap_sg(vha, cmd);
+ qlt_unmap_sg(vha, cmd);
if (unlikely(status != CTIO_SUCCESS)) {
switch (status & 0xFFFF) {
EXPORT_SYMBOL(qlt_lport_deregister);
/* Must be called under HW lock */
-void qlt_set_mode(struct scsi_qla_host *vha)
+static void qlt_set_mode(struct scsi_qla_host *vha)
{
struct qla_hw_data *ha = vha->hw;
}
/* Must be called under HW lock */
-void qlt_clear_mode(struct scsi_qla_host *vha)
+static void qlt_clear_mode(struct scsi_qla_host *vha)
{
struct qla_hw_data *ha = vha->hw;
*
* Disable Target Mode and reset the adapter
*/
-void
-qlt_disable_vha(struct scsi_qla_host *vha)
+static void qlt_disable_vha(struct scsi_qla_host *vha)
{
struct qla_hw_data *ha = vha->hw;
struct qla_tgt *tgt = vha->vha_tgt.qla_tgt;
struct qla_tgt *tgt;
void *pkt;
struct scatterlist *sg; /* cmd data buffer SG vector */
+ unsigned char *sense_buffer;
int seg_cnt;
int req_cnt;
uint16_t rq_result;
uint16_t scsi_status;
- unsigned char *sense_buffer;
int sense_buffer_len;
int residual;
int add_status_pkt;
extern struct qla_tgt_data qla_target;
-/*
- * Internal function prototypes
- */
-void qlt_disable_vha(struct scsi_qla_host *);
/*
* Function prototypes for qla_target.c logic used by qla2xxx LLD code.
extern void qlt_unreg_sess(struct qla_tgt_sess *);
extern void qlt_fc_port_added(struct scsi_qla_host *, fc_port_t *);
extern void qlt_fc_port_deleted(struct scsi_qla_host *, fc_port_t *);
-extern void qlt_set_mode(struct scsi_qla_host *ha);
-extern void qlt_clear_mode(struct scsi_qla_host *ha);
extern int __init qlt_init(void);
extern void qlt_exit(void);
extern void qlt_update_vp_map(struct scsi_qla_host *, int);
/*
* Exported symbols from qla_target.c LLD logic used by qla2xxx code..
*/
-extern void qlt_24xx_atio_pkt_all_vps(struct scsi_qla_host *,
- struct atio_from_isp *);
extern void qlt_response_pkt_all_vps(struct scsi_qla_host *, response_t *);
extern int qlt_rdy_to_xfer(struct qla_tgt_cmd *);
extern int qlt_xmit_response(struct qla_tgt_cmd *, int, uint8_t);
-extern int qlt_rdy_to_xfer_dif(struct qla_tgt_cmd *);
-extern int qlt_xmit_response_dif(struct qla_tgt_cmd *, int, uint8_t);
extern void qlt_xmit_tm_rsp(struct qla_tgt_mgmt_cmd *);
extern void qlt_free_mcmd(struct qla_tgt_mgmt_cmd *);
extern void qlt_free_cmd(struct qla_tgt_cmd *cmd);
pr_debug("fc_rport domain: port_id 0x%06x\n", nacl->nport_id);
node = btree_remove32(&lport->lport_fcport_map, nacl->nport_id);
- WARN_ON(node && (node != se_nacl));
+ if (WARN_ON(node && (node != se_nacl))) {
+ /*
+ * The nacl no longer matches what we think it should be.
+ * Most likely a new dynamic acl has been added while
+ * someone dropped the hardware lock. It clearly is a
+ * bug elsewhere, but this bit can't make things worse.
+ */
+ btree_insert32(&lport->lport_fcport_map, nacl->nport_id,
+ node, GFP_ATOMIC);
+ }
pr_debug("Removed from fcport_map: %p for WWNN: 0x%016LX, port_id: 0x%06x\n",
se_nacl, nacl->nport_wwnn, nacl->nport_id);
uint16_t req_cnt;
unsigned long flags;
uint32_t index;
- char tag[2];
/* Get real lun and adapter */
ddb_entry = srb->ddb;
/* Set tagged queueing control flags */
cmd_entry->control_flags |= CF_SIMPLE_TAG;
- if (scsi_populate_tag_msg(cmd, tag))
- switch (tag[0]) {
- case MSG_HEAD_TAG:
- cmd_entry->control_flags |= CF_HEAD_TAG;
- break;
- case MSG_ORDERED_TAG:
- cmd_entry->control_flags |= CF_ORDERED_TAG;
- break;
- }
qla4xxx_advance_req_ring_ptr(ha);
qla4xxx_build_scsi_iocbs(srb, cmd_entry, tot_dsds);
static int qla4xxx_eh_target_reset(struct scsi_cmnd *cmd);
static int qla4xxx_eh_host_reset(struct scsi_cmnd *cmd);
static int qla4xxx_slave_alloc(struct scsi_device *device);
-static int qla4xxx_slave_configure(struct scsi_device *device);
-static void qla4xxx_slave_destroy(struct scsi_device *sdev);
static umode_t qla4_attr_is_visible(int param_type, int param);
static int qla4xxx_host_reset(struct Scsi_Host *shost, int reset_type);
-static int qla4xxx_change_queue_depth(struct scsi_device *sdev, int qdepth,
- int reason);
/*
* iSCSI Flash DDB sysfs entry points
.eh_host_reset_handler = qla4xxx_eh_host_reset,
.eh_timed_out = qla4xxx_eh_cmd_timed_out,
- .slave_configure = qla4xxx_slave_configure,
.slave_alloc = qla4xxx_slave_alloc,
- .slave_destroy = qla4xxx_slave_destroy,
- .change_queue_depth = qla4xxx_change_queue_depth,
+ .change_queue_depth = scsi_change_queue_depth,
.this_id = -1,
.cmd_per_lun = 3,
.shost_attrs = qla4xxx_host_attrs,
.host_reset = qla4xxx_host_reset,
.vendor_id = SCSI_NL_VID_TYPE_PCI | PCI_VENDOR_ID_QLOGIC,
+ .use_blk_tags = 1,
};
static struct iscsi_transport qla4xxx_iscsi_transport = {
ddb = sess->dd_data;
sdev->hostdata = ddb;
- sdev->tagged_supported = 1;
if (ql4xmaxqdepth != 0 && ql4xmaxqdepth <= 0xffffU)
queue_depth = ql4xmaxqdepth;
- scsi_activate_tcq(sdev, queue_depth);
+ scsi_change_queue_depth(sdev, queue_depth);
return 0;
}
-static int qla4xxx_slave_configure(struct scsi_device *sdev)
-{
- sdev->tagged_supported = 1;
- return 0;
-}
-
-static void qla4xxx_slave_destroy(struct scsi_device *sdev)
-{
- scsi_deactivate_tcq(sdev, 1);
-}
-
-static int qla4xxx_change_queue_depth(struct scsi_device *sdev, int qdepth,
- int reason)
-{
- if (!ql4xqfulltracking)
- return -EOPNOTSUPP;
-
- return iscsi_change_queue_depth(sdev, qdepth, reason);
-}
-
/**
* qla4xxx_del_from_active_array - returns an active srb
* @ha: Pointer to host adapter structure.
{
int ret;
+ if (ql4xqfulltracking)
+ qla4xxx_driver_template.track_queue_depth = 1;
+
/* Allocate cache for SRBs. */
srb_cachep = kmem_cache_create("qla4xxx_srbs", sizeof(struct srb), 0,
SLAB_HWCACHE_ALIGN, NULL);
*
* 1: nothing (match completion)
*
- * 2: log opcode + command of all commands
+ * 2: log opcode + command of all commands + cmd address
*
- * 3: same as 2 plus dump cmd address
+ * 3: same as 2
*
* 4: same as 3 plus dump extra junk
*/
level = SCSI_LOG_LEVEL(SCSI_LOG_MLQUEUE_SHIFT,
SCSI_LOG_MLQUEUE_BITS);
if (level > 1) {
- scmd_printk(KERN_INFO, cmd, "Send: ");
- if (level > 2)
- printk("0x%p ", cmd);
- printk("\n");
+ scmd_printk(KERN_INFO, cmd,
+ "Send: scmd 0x%p\n", cmd);
scsi_print_command(cmd);
if (level > 3) {
printk(KERN_INFO "buffer = 0x%p, bufflen = %d,"
*
* 2: same as 1 but for all command completions.
*
- * 3: same as 2 plus dump cmd address
+ * 3: same as 2
*
* 4: same as 3 plus dump extra junk
*/
SCSI_LOG_MLCOMPLETE_BITS);
if (((level > 0) && (cmd->result || disposition != SUCCESS)) ||
(level > 1)) {
- scmd_printk(KERN_INFO, cmd, "Done: ");
- if (level > 2)
- printk("0x%p ", cmd);
- /*
- * Dump truncated values, so we usually fit within
- * 80 chars.
- */
- switch (disposition) {
- case SUCCESS:
- printk("SUCCESS\n");
- break;
- case NEEDS_RETRY:
- printk("RETRY\n");
- break;
- case ADD_TO_MLQUEUE:
- printk("MLQUEUE\n");
- break;
- case FAILED:
- printk("FAILED\n");
- break;
- case TIMEOUT_ERROR:
- /*
- * If called via scsi_times_out.
- */
- printk("TIMEOUT\n");
- break;
- default:
- printk("UNKNOWN\n");
- }
- scsi_print_result(cmd);
+ scsi_print_result(cmd, "Done: ", disposition);
scsi_print_command(cmd);
if (status_byte(cmd->result) & CHECK_CONDITION)
- scsi_print_sense("", cmd);
+ scsi_print_sense(cmd);
if (level > 3)
scmd_printk(KERN_INFO, cmd,
"scsi host busy %d failed %d\n",
}
EXPORT_SYMBOL(scsi_cmd_get_serial);
-/**
- * scsi_dispatch_command - Dispatch a command to the low-level driver.
- * @cmd: command block we are dispatching.
- *
- * Return: nonzero return request was rejected and device's queue needs to be
- * plugged.
- */
-int scsi_dispatch_cmd(struct scsi_cmnd *cmd)
-{
- struct Scsi_Host *host = cmd->device->host;
- int rtn = 0;
-
- atomic_inc(&cmd->device->iorequest_cnt);
-
- /* check if the device is still usable */
- if (unlikely(cmd->device->sdev_state == SDEV_DEL)) {
- /* in SDEV_DEL we error all commands. DID_NO_CONNECT
- * returns an immediate error upwards, and signals
- * that the device is no longer present */
- cmd->result = DID_NO_CONNECT << 16;
- goto done;
- }
-
- /* Check to see if the scsi lld made this device blocked. */
- if (unlikely(scsi_device_blocked(cmd->device))) {
- /*
- * in blocked state, the command is just put back on
- * the device queue. The suspend state has already
- * blocked the queue so future requests should not
- * occur until the device transitions out of the
- * suspend state.
- */
- SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd,
- "queuecommand : device blocked\n"));
- return SCSI_MLQUEUE_DEVICE_BUSY;
- }
-
- /* Store the LUN value in cmnd, if needed. */
- if (cmd->device->lun_in_cdb)
- cmd->cmnd[1] = (cmd->cmnd[1] & 0x1f) |
- (cmd->device->lun << 5 & 0xe0);
-
- scsi_log_send(cmd);
-
- /*
- * Before we queue this command, check if the command
- * length exceeds what the host adapter can handle.
- */
- if (cmd->cmd_len > cmd->device->host->max_cmd_len) {
- SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd,
- "queuecommand : command too long. "
- "cdb_size=%d host->max_cmd_len=%d\n",
- cmd->cmd_len, cmd->device->host->max_cmd_len));
- cmd->result = (DID_ABORT << 16);
- goto done;
- }
-
- if (unlikely(host->shost_state == SHOST_DEL)) {
- cmd->result = (DID_NO_CONNECT << 16);
- goto done;
-
- }
-
- trace_scsi_dispatch_cmd_start(cmd);
- rtn = host->hostt->queuecommand(host, cmd);
- if (rtn) {
- trace_scsi_dispatch_cmd_error(cmd, rtn);
- if (rtn != SCSI_MLQUEUE_DEVICE_BUSY &&
- rtn != SCSI_MLQUEUE_TARGET_BUSY)
- rtn = SCSI_MLQUEUE_HOST_BUSY;
-
- SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd,
- "queuecommand : request rejected\n"));
- }
-
- return rtn;
- done:
- cmd->scsi_done(cmd);
- return 0;
-}
-
/**
* scsi_finish_command - cleanup and pass command back to upper layer
* @cmd: the command
}
/**
- * scsi_adjust_queue_depth - Let low level drivers change a device's queue depth
+ * scsi_change_queue_depth - change a device's queue depth
* @sdev: SCSI Device in question
- * @tagged: Do we use tagged queueing (non-0) or do we treat
- * this device as an untagged device (0)
- * @tags: Number of tags allowed if tagged queueing enabled,
- * or number of commands the low level driver can
- * queue up in non-tagged mode (as per cmd_per_lun).
- *
- * Returns: Nothing
+ * @depth: number of commands allowed to be queued to the driver
*
- * Lock Status: None held on entry
- *
- * Notes: Low level drivers may call this at any time and we will do
- * the right thing depending on whether or not the device is
- * currently active and whether or not it even has the
- * command blocks built yet.
+ * Sets the device queue depth and returns the new value.
*/
-void scsi_adjust_queue_depth(struct scsi_device *sdev, int tagged, int tags)
+int scsi_change_queue_depth(struct scsi_device *sdev, int depth)
{
unsigned long flags;
- /*
- * refuse to set tagged depth to an unworkable size
- */
- if (tags <= 0)
- return;
+ if (depth <= 0)
+ goto out;
spin_lock_irqsave(sdev->request_queue->queue_lock, flags);
*/
if (!shost_use_blk_mq(sdev->host) && !sdev->host->bqt) {
if (blk_queue_tagged(sdev->request_queue) &&
- blk_queue_resize_tags(sdev->request_queue, tags) != 0)
- goto out;
+ blk_queue_resize_tags(sdev->request_queue, depth) != 0)
+ goto out_unlock;
}
- sdev->queue_depth = tags;
- switch (tagged) {
- case 0:
- sdev->ordered_tags = 0;
- sdev->simple_tags = 0;
- break;
- case MSG_ORDERED_TAG:
- sdev->ordered_tags = 1;
- sdev->simple_tags = 1;
- break;
- case MSG_SIMPLE_TAG:
- sdev->ordered_tags = 0;
- sdev->simple_tags = 1;
- break;
- default:
- sdev->ordered_tags = 0;
- sdev->simple_tags = 0;
- sdev_printk(KERN_WARNING, sdev,
- "scsi_adjust_queue_depth, bad queue type, "
- "disabled\n");
- }
- out:
+ sdev->queue_depth = depth;
+out_unlock:
spin_unlock_irqrestore(sdev->request_queue->queue_lock, flags);
+out:
+ return sdev->queue_depth;
}
-EXPORT_SYMBOL(scsi_adjust_queue_depth);
+EXPORT_SYMBOL(scsi_change_queue_depth);
/**
* scsi_track_queue_full - track QUEUE_FULL events to adjust queue depth
return 0;
if (sdev->last_queue_full_depth < 8) {
/* Drop back to untagged */
- scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
+ scsi_set_tag_type(sdev, 0);
+ scsi_change_queue_depth(sdev, sdev->host->cmd_per_lun);
return -1;
}
-
- if (sdev->ordered_tags)
- scsi_adjust_queue_depth(sdev, MSG_ORDERED_TAG, depth);
- else
- scsi_adjust_queue_depth(sdev, MSG_SIMPLE_TAG, depth);
- return depth;
+
+ return scsi_change_queue_depth(sdev, depth);
}
EXPORT_SYMBOL(scsi_track_queue_full);
+/**
+ * scsi_change_queue_type() - Change a device's queue type
+ * @sdev: The SCSI device whose queue depth is to change
+ * @tag_type: Identifier for queue type
+ */
+int scsi_change_queue_type(struct scsi_device *sdev, int tag_type)
+{
+ if (!sdev->tagged_supported)
+ return 0;
+
+ scsi_set_tag_type(sdev, tag_type);
+ return tag_type;
+
+}
+EXPORT_SYMBOL(scsi_change_queue_type);
+
/**
* scsi_vpd_inquiry - Request a device provide us with a VPD page
* @sdev: The device to ask
#include "sd.h"
#include "scsi_logging.h"
-#define SCSI_DEBUG_VERSION "1.84"
-static const char *scsi_debug_version_date = "20140706";
+#define SCSI_DEBUG_VERSION "1.85"
+static const char *scsi_debug_version_date = "20141022";
#define MY_NAME "scsi_debug"
#define UNRECOVERED_READ_ERR 0x11
#define PARAMETER_LIST_LENGTH_ERR 0x1a
#define INVALID_OPCODE 0x20
-#define ADDR_OUT_OF_RANGE 0x21
-#define INVALID_COMMAND_OPCODE 0x20
+#define LBA_OUT_OF_RANGE 0x21
#define INVALID_FIELD_IN_CDB 0x24
#define INVALID_FIELD_IN_PARAM_LIST 0x26
#define UA_RESET_ASC 0x29
#define UA_CHANGED_ASC 0x2a
+#define INSUFF_RES_ASC 0x55
+#define INSUFF_RES_ASCQ 0x3
#define POWER_ON_RESET_ASCQ 0x0
#define BUS_RESET_ASCQ 0x2 /* scsi bus reset occurred */
#define MODE_CHANGED_ASCQ 0x1 /* mode parameters changed */
+#define CAPACITY_CHANGED_ASCQ 0x9
#define SAVING_PARAMS_UNSUP 0x39
#define TRANSPORT_PROBLEM 0x4b
#define THRESHOLD_EXCEEDED 0x5d
#define LOW_POWER_COND_ON 0x5e
+#define MISCOMPARE_VERIFY_ASC 0x1d
/* Additional Sense Code Qualifier (ASCQ) */
#define ACK_NAK_TO 0x3
#define DEF_VIRTUAL_GB 0
#define DEF_VPD_USE_HOSTNO 1
#define DEF_WRITESAME_LENGTH 0xFFFF
+#define DEF_STRICT 0
#define DELAY_OVERRIDDEN -9999
/* bit mask values for scsi_debug_opts */
#define SDEBUG_UA_POR 0 /* Power on, reset, or bus device reset */
#define SDEBUG_UA_BUS_RESET 1
#define SDEBUG_UA_MODE_CHANGED 2
-#define SDEBUG_NUM_UAS 3
+#define SDEBUG_UA_CAPACITY_CHANGED 3
+#define SDEBUG_NUM_UAS 4
/* for check_readiness() */
-#define UAS_ONLY 1
-#define UAS_TUR 0
+#define UAS_ONLY 1 /* check for UAs only */
+#define UAS_TUR 0 /* if no UAs then check if media access possible */
/* when 1==SCSI_DEBUG_OPT_MEDIUM_ERR, a medium error is simulated at this
* sector on read commands: */
#warning "Expect DEF_CMD_PER_LUN <= SCSI_DEBUG_CANQUEUE"
#endif
+/* SCSI opcodes (first byte of cdb) mapped onto these indexes */
+enum sdeb_opcode_index {
+ SDEB_I_INVALID_OPCODE = 0,
+ SDEB_I_INQUIRY = 1,
+ SDEB_I_REPORT_LUNS = 2,
+ SDEB_I_REQUEST_SENSE = 3,
+ SDEB_I_TEST_UNIT_READY = 4,
+ SDEB_I_MODE_SENSE = 5, /* 6, 10 */
+ SDEB_I_MODE_SELECT = 6, /* 6, 10 */
+ SDEB_I_LOG_SENSE = 7,
+ SDEB_I_READ_CAPACITY = 8, /* 10; 16 is in SA_IN(16) */
+ SDEB_I_READ = 9, /* 6, 10, 12, 16 */
+ SDEB_I_WRITE = 10, /* 6, 10, 12, 16 */
+ SDEB_I_START_STOP = 11,
+ SDEB_I_SERV_ACT_IN = 12, /* 12, 16 */
+ SDEB_I_SERV_ACT_OUT = 13, /* 12, 16 */
+ SDEB_I_MAINT_IN = 14,
+ SDEB_I_MAINT_OUT = 15,
+ SDEB_I_VERIFY = 16, /* 10 only */
+ SDEB_I_VARIABLE_LEN = 17,
+ SDEB_I_RESERVE = 18, /* 6, 10 */
+ SDEB_I_RELEASE = 19, /* 6, 10 */
+ SDEB_I_ALLOW_REMOVAL = 20, /* PREVENT ALLOW MEDIUM REMOVAL */
+ SDEB_I_REZERO_UNIT = 21, /* REWIND in SSC */
+ SDEB_I_ATA_PT = 22, /* 12, 16 */
+ SDEB_I_SEND_DIAG = 23,
+ SDEB_I_UNMAP = 24,
+ SDEB_I_XDWRITEREAD = 25, /* 10 only */
+ SDEB_I_WRITE_BUFFER = 26,
+ SDEB_I_WRITE_SAME = 27, /* 10, 16 */
+ SDEB_I_SYNC_CACHE = 28, /* 10 only */
+ SDEB_I_COMP_WRITE = 29,
+ SDEB_I_LAST_ELEMENT = 30, /* keep this last */
+};
+
+static const unsigned char opcode_ind_arr[256] = {
+/* 0x0; 0x0->0x1f: 6 byte cdbs */
+ SDEB_I_TEST_UNIT_READY, SDEB_I_REZERO_UNIT, 0, SDEB_I_REQUEST_SENSE,
+ 0, 0, 0, 0,
+ SDEB_I_READ, 0, SDEB_I_WRITE, 0, 0, 0, 0, 0,
+ 0, 0, SDEB_I_INQUIRY, 0, 0, SDEB_I_MODE_SELECT, SDEB_I_RESERVE,
+ SDEB_I_RELEASE,
+ 0, 0, SDEB_I_MODE_SENSE, SDEB_I_START_STOP, 0, SDEB_I_SEND_DIAG,
+ SDEB_I_ALLOW_REMOVAL, 0,
+/* 0x20; 0x20->0x3f: 10 byte cdbs */
+ 0, 0, 0, 0, 0, SDEB_I_READ_CAPACITY, 0, 0,
+ SDEB_I_READ, 0, SDEB_I_WRITE, 0, 0, 0, 0, SDEB_I_VERIFY,
+ 0, 0, 0, 0, 0, SDEB_I_SYNC_CACHE, 0, 0,
+ 0, 0, 0, SDEB_I_WRITE_BUFFER, 0, 0, 0, 0,
+/* 0x40; 0x40->0x5f: 10 byte cdbs */
+ 0, SDEB_I_WRITE_SAME, SDEB_I_UNMAP, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, SDEB_I_LOG_SENSE, 0, 0,
+ 0, 0, 0, SDEB_I_XDWRITEREAD, 0, SDEB_I_MODE_SELECT, SDEB_I_RESERVE,
+ SDEB_I_RELEASE,
+ 0, 0, SDEB_I_MODE_SENSE, 0, 0, 0, 0, 0,
+/* 0x60; 0x60->0x7d are reserved */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, SDEB_I_VARIABLE_LEN,
+/* 0x80; 0x80->0x9f: 16 byte cdbs */
+ 0, 0, 0, 0, 0, SDEB_I_ATA_PT, 0, 0,
+ SDEB_I_READ, SDEB_I_COMP_WRITE, SDEB_I_WRITE, 0, 0, 0, 0, 0,
+ 0, 0, 0, SDEB_I_WRITE_SAME, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, SDEB_I_SERV_ACT_IN, SDEB_I_SERV_ACT_OUT,
+/* 0xa0; 0xa0->0xbf: 12 byte cdbs */
+ SDEB_I_REPORT_LUNS, SDEB_I_ATA_PT, 0, SDEB_I_MAINT_IN,
+ SDEB_I_MAINT_OUT, 0, 0, 0,
+ SDEB_I_READ, SDEB_I_SERV_ACT_OUT, SDEB_I_WRITE, SDEB_I_SERV_ACT_IN,
+ 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0,
+/* 0xc0; 0xc0->0xff: vendor specific */
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0,
+};
+
+#define F_D_IN 1
+#define F_D_OUT 2
+#define F_D_OUT_MAYBE 4 /* WRITE SAME, NDOB bit */
+#define F_D_UNKN 8
+#define F_RL_WLUN_OK 0x10
+#define F_SKIP_UA 0x20
+#define F_DELAY_OVERR 0x40
+#define F_SA_LOW 0x80 /* cdb byte 1, bits 4 to 0 */
+#define F_SA_HIGH 0x100 /* as used by variable length cdbs */
+#define F_INV_OP 0x200
+#define F_FAKE_RW 0x400
+#define F_M_ACCESS 0x800 /* media access */
+
+#define FF_RESPOND (F_RL_WLUN_OK | F_SKIP_UA | F_DELAY_OVERR)
+#define FF_DIRECT_IO (F_M_ACCESS | F_FAKE_RW)
+#define FF_SA (F_SA_HIGH | F_SA_LOW)
+
+struct sdebug_dev_info;
+static int resp_inquiry(struct scsi_cmnd *, struct sdebug_dev_info *);
+static int resp_report_luns(struct scsi_cmnd *, struct sdebug_dev_info *);
+static int resp_requests(struct scsi_cmnd *, struct sdebug_dev_info *);
+static int resp_mode_sense(struct scsi_cmnd *, struct sdebug_dev_info *);
+static int resp_mode_select(struct scsi_cmnd *, struct sdebug_dev_info *);
+static int resp_log_sense(struct scsi_cmnd *, struct sdebug_dev_info *);
+static int resp_readcap(struct scsi_cmnd *, struct sdebug_dev_info *);
+static int resp_read_dt0(struct scsi_cmnd *, struct sdebug_dev_info *);
+static int resp_write_dt0(struct scsi_cmnd *, struct sdebug_dev_info *);
+static int resp_start_stop(struct scsi_cmnd *, struct sdebug_dev_info *);
+static int resp_readcap16(struct scsi_cmnd *, struct sdebug_dev_info *);
+static int resp_get_lba_status(struct scsi_cmnd *, struct sdebug_dev_info *);
+static int resp_report_tgtpgs(struct scsi_cmnd *, struct sdebug_dev_info *);
+static int resp_unmap(struct scsi_cmnd *, struct sdebug_dev_info *);
+static int resp_rsup_opcodes(struct scsi_cmnd *, struct sdebug_dev_info *);
+static int resp_rsup_tmfs(struct scsi_cmnd *, struct sdebug_dev_info *);
+static int resp_write_same_10(struct scsi_cmnd *, struct sdebug_dev_info *);
+static int resp_write_same_16(struct scsi_cmnd *, struct sdebug_dev_info *);
+static int resp_xdwriteread_10(struct scsi_cmnd *, struct sdebug_dev_info *);
+static int resp_comp_write(struct scsi_cmnd *, struct sdebug_dev_info *);
+
+struct opcode_info_t {
+ u8 num_attached; /* 0 if this is it (i.e. a leaf); use 0xff
+ * for terminating element */
+ u8 opcode; /* if num_attached > 0, preferred */
+ u16 sa; /* service action */
+ u32 flags; /* OR-ed set of SDEB_F_* */
+ int (*pfp)(struct scsi_cmnd *, struct sdebug_dev_info *);
+ const struct opcode_info_t *arrp; /* num_attached elements or NULL */
+ u8 len_mask[16]; /* len=len_mask[0], then mask for cdb[1]... */
+ /* ignore cdb bytes after position 15 */
+};
+
+static const struct opcode_info_t msense_iarr[1] = {
+ {0, 0x1a, 0, F_D_IN, NULL, NULL,
+ {6, 0xe8, 0xff, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+};
+
+static const struct opcode_info_t mselect_iarr[1] = {
+ {0, 0x15, 0, F_D_OUT, NULL, NULL,
+ {6, 0xf1, 0, 0, 0xff, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+};
+
+static const struct opcode_info_t read_iarr[3] = {
+ {0, 0x28, 0, F_D_IN | FF_DIRECT_IO, resp_read_dt0, NULL,/* READ(10) */
+ {10, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0xff, 0xff, 0xc7, 0, 0,
+ 0, 0, 0, 0} },
+ {0, 0x8, 0, F_D_IN | FF_DIRECT_IO, resp_read_dt0, NULL, /* READ(6) */
+ {6, 0xff, 0xff, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+ {0, 0xa8, 0, F_D_IN | FF_DIRECT_IO, resp_read_dt0, NULL,/* READ(12) */
+ {12, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x9f,
+ 0xc7, 0, 0, 0, 0} },
+};
+
+static const struct opcode_info_t write_iarr[3] = {
+ {0, 0x2a, 0, F_D_OUT | FF_DIRECT_IO, resp_write_dt0, NULL, /* 10 */
+ {10, 0xfb, 0xff, 0xff, 0xff, 0xff, 0x1f, 0xff, 0xff, 0xc7, 0, 0,
+ 0, 0, 0, 0} },
+ {0, 0xa, 0, F_D_OUT | FF_DIRECT_IO, resp_write_dt0, NULL, /* 6 */
+ {6, 0xff, 0xff, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+ {0, 0xaa, 0, F_D_OUT | FF_DIRECT_IO, resp_write_dt0, NULL, /* 12 */
+ {12, 0xfb, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x9f,
+ 0xc7, 0, 0, 0, 0} },
+};
+
+static const struct opcode_info_t sa_in_iarr[1] = {
+ {0, 0x9e, 0x12, F_SA_LOW | F_D_IN, resp_get_lba_status, NULL,
+ {16, 0x12, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0, 0xc7} },
+};
+
+static const struct opcode_info_t vl_iarr[1] = { /* VARIABLE LENGTH */
+ {0, 0x7f, 0xb, F_SA_HIGH | F_D_OUT | FF_DIRECT_IO, resp_write_dt0,
+ NULL, {32, 0xc7, 0, 0, 0, 0, 0x1f, 0x18, 0x0, 0xb, 0xfa,
+ 0, 0xff, 0xff, 0xff, 0xff} }, /* WRITE(32) */
+};
+
+static const struct opcode_info_t maint_in_iarr[2] = {
+ {0, 0xa3, 0xc, F_SA_LOW | F_D_IN, resp_rsup_opcodes, NULL,
+ {12, 0xc, 0x87, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0,
+ 0xc7, 0, 0, 0, 0} },
+ {0, 0xa3, 0xd, F_SA_LOW | F_D_IN, resp_rsup_tmfs, NULL,
+ {12, 0xd, 0x80, 0, 0, 0, 0xff, 0xff, 0xff, 0xff, 0, 0xc7, 0, 0,
+ 0, 0} },
+};
+
+static const struct opcode_info_t write_same_iarr[1] = {
+ {0, 0x93, 0, F_D_OUT_MAYBE | FF_DIRECT_IO, resp_write_same_16, NULL,
+ {16, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0x1f, 0xc7} },
+};
+
+static const struct opcode_info_t reserve_iarr[1] = {
+ {0, 0x16, 0, F_D_OUT, NULL, NULL, /* RESERVE(6) */
+ {6, 0x1f, 0xff, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+};
+
+static const struct opcode_info_t release_iarr[1] = {
+ {0, 0x17, 0, F_D_OUT, NULL, NULL, /* RELEASE(6) */
+ {6, 0x1f, 0xff, 0, 0, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+};
+
+
+/* This array is accessed via SDEB_I_* values. Make sure all are mapped,
+ * plus the terminating elements for logic that scans this table such as
+ * REPORT SUPPORTED OPERATION CODES. */
+static const struct opcode_info_t opcode_info_arr[SDEB_I_LAST_ELEMENT + 1] = {
+/* 0 */
+ {0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL,
+ {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+ {0, 0x12, 0, FF_RESPOND | F_D_IN, resp_inquiry, NULL,
+ {6, 0xe3, 0xff, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+ {0, 0xa0, 0, FF_RESPOND | F_D_IN, resp_report_luns, NULL,
+ {12, 0xe3, 0xff, 0, 0, 0, 0xff, 0xff, 0xff, 0xff, 0, 0xc7, 0, 0,
+ 0, 0} },
+ {0, 0x3, 0, FF_RESPOND | F_D_IN, resp_requests, NULL,
+ {6, 0xe1, 0, 0, 0xff, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+ {0, 0x0, 0, F_M_ACCESS | F_RL_WLUN_OK, NULL, NULL,/* TEST UNIT READY */
+ {6, 0, 0, 0, 0, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+ {1, 0x5a, 0, F_D_IN, resp_mode_sense, msense_iarr,
+ {10, 0xf8, 0xff, 0xff, 0, 0, 0, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0,
+ 0} },
+ {1, 0x55, 0, F_D_OUT, resp_mode_select, mselect_iarr,
+ {10, 0xf1, 0, 0, 0, 0, 0, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0, 0} },
+ {0, 0x4d, 0, F_D_IN, resp_log_sense, NULL,
+ {10, 0xe3, 0xff, 0xff, 0, 0xff, 0xff, 0xff, 0xff, 0xc7, 0, 0, 0,
+ 0, 0, 0} },
+ {0, 0x25, 0, F_D_IN, resp_readcap, NULL,
+ {10, 0xe1, 0xff, 0xff, 0xff, 0xff, 0, 0, 0x1, 0xc7, 0, 0, 0, 0,
+ 0, 0} },
+ {3, 0x88, 0, F_D_IN | FF_DIRECT_IO, resp_read_dt0, read_iarr,
+ {16, 0xfe, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0x9f, 0xc7} }, /* READ(16) */
+/* 10 */
+ {3, 0x8a, 0, F_D_OUT | FF_DIRECT_IO, resp_write_dt0, write_iarr,
+ {16, 0xfa, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0x9f, 0xc7} }, /* WRITE(16) */
+ {0, 0x1b, 0, 0, resp_start_stop, NULL, /* START STOP UNIT */
+ {6, 0x1, 0, 0xf, 0xf7, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+ {1, 0x9e, 0x10, F_SA_LOW | F_D_IN, resp_readcap16, sa_in_iarr,
+ {16, 0x10, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
+ 0xff, 0xff, 0xff, 0x1, 0xc7} }, /* READ CAPACITY(16) */
+ {0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* SA OUT */
+ {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+ {2, 0xa3, 0xa, F_SA_LOW | F_D_IN, resp_report_tgtpgs, maint_in_iarr,
+ {12, 0xea, 0, 0, 0, 0, 0xff, 0xff, 0xff, 0xff, 0, 0xc7, 0, 0, 0,
+ 0} },
+ {0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* MAINT OUT */
+ {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+ {0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* VERIFY */
+ {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+ {1, 0x7f, 0x9, F_SA_HIGH | F_D_IN | FF_DIRECT_IO, resp_read_dt0,
+ vl_iarr, {32, 0xc7, 0, 0, 0, 0, 0x1f, 0x18, 0x0, 0x9, 0xfe, 0,
+ 0xff, 0xff, 0xff, 0xff} },/* VARIABLE LENGTH, READ(32) */
+ {1, 0x56, 0, F_D_OUT, NULL, reserve_iarr, /* RESERVE(10) */
+ {10, 0xff, 0xff, 0xff, 0, 0, 0, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0,
+ 0} },
+ {1, 0x57, 0, F_D_OUT, NULL, release_iarr, /* RELEASE(10) */
+ {10, 0x13, 0xff, 0xff, 0, 0, 0, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0,
+ 0} },
+/* 20 */
+ {0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* ALLOW REMOVAL */
+ {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+ {0, 0x1, 0, 0, resp_start_stop, NULL, /* REWIND ?? */
+ {6, 0x1, 0, 0, 0, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+ {0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* ATA_PT */
+ {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+ {0, 0x1d, F_D_OUT, 0, NULL, NULL, /* SEND DIAGNOSTIC */
+ {6, 0xf7, 0, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+ {0, 0x42, 0, F_D_OUT | FF_DIRECT_IO, resp_unmap, NULL, /* UNMAP */
+ {10, 0x1, 0, 0, 0, 0, 0x1f, 0xff, 0xff, 0xc7, 0, 0, 0, 0, 0, 0} },
+ {0, 0x53, 0, F_D_IN | F_D_OUT | FF_DIRECT_IO, resp_xdwriteread_10,
+ NULL, {10, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0xff, 0xff, 0xc7,
+ 0, 0, 0, 0, 0, 0} },
+ {0, 0, 0, F_INV_OP | FF_RESPOND, NULL, NULL, /* WRITE_BUFFER */
+ {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+ {1, 0x41, 0, F_D_OUT_MAYBE | FF_DIRECT_IO, resp_write_same_10,
+ write_same_iarr, {10, 0xff, 0xff, 0xff, 0xff, 0xff, 0x1f, 0xff,
+ 0xff, 0xc7, 0, 0, 0, 0, 0, 0} },
+ {0, 0x35, 0, F_DELAY_OVERR | FF_DIRECT_IO, NULL, NULL, /* SYNC_CACHE */
+ {10, 0x7, 0xff, 0xff, 0xff, 0xff, 0x1f, 0xff, 0xff, 0xc7, 0, 0,
+ 0, 0, 0, 0} },
+ {0, 0x89, 0, F_D_OUT | FF_DIRECT_IO, resp_comp_write, NULL,
+ {16, 0xf8, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0, 0,
+ 0, 0xff, 0x1f, 0xc7} }, /* COMPARE AND WRITE */
+
+/* 30 */
+ {0xff, 0, 0, 0, NULL, NULL, /* terminating element */
+ {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0} },
+};
+
+struct sdebug_scmd_extra_t {
+ bool inj_recovered;
+ bool inj_transport;
+ bool inj_dif;
+ bool inj_dix;
+ bool inj_short;
+};
+
static int scsi_debug_add_host = DEF_NUM_HOST;
static int scsi_debug_ato = DEF_ATO;
static int scsi_debug_delay = DEF_DELAY;
static bool scsi_debug_removable = DEF_REMOVABLE;
static bool scsi_debug_clustering;
static bool scsi_debug_host_lock = DEF_HOST_LOCK;
+static bool scsi_debug_strict = DEF_STRICT;
+static bool sdebug_any_injecting_opt;
static atomic_t sdebug_cmnd_count;
static atomic_t sdebug_completions;
unsigned int target;
u64 lun;
struct sdebug_host_info *sdbg_host;
- u64 wlun;
unsigned long uas_bm[1];
atomic_t num_in_q;
- char stopped;
- char used;
+ char stopped; /* TODO: should be atomic */
+ bool used;
};
struct sdebug_host_info {
spin_unlock(&sdebug_host_list_lock);
}
+enum sdeb_cmd_data {SDEB_IN_DATA = 0, SDEB_IN_CDB = 1};
+
+/* Set in_bit to -1 to indicate no bit position of invalid field */
+static void
+mk_sense_invalid_fld(struct scsi_cmnd *scp, enum sdeb_cmd_data c_d,
+ int in_byte, int in_bit)
+{
+ unsigned char *sbuff;
+ u8 sks[4];
+ int sl, asc;
+
+ sbuff = scp->sense_buffer;
+ if (!sbuff) {
+ sdev_printk(KERN_ERR, scp->device,
+ "%s: sense_buffer is NULL\n", __func__);
+ return;
+ }
+ asc = c_d ? INVALID_FIELD_IN_CDB : INVALID_FIELD_IN_PARAM_LIST;
+ memset(sbuff, 0, SCSI_SENSE_BUFFERSIZE);
+ scsi_build_sense_buffer(scsi_debug_dsense, sbuff, ILLEGAL_REQUEST,
+ asc, 0);
+ memset(sks, 0, sizeof(sks));
+ sks[0] = 0x80;
+ if (c_d)
+ sks[0] |= 0x40;
+ if (in_bit >= 0) {
+ sks[0] |= 0x8;
+ sks[0] |= 0x7 & in_bit;
+ }
+ put_unaligned_be16(in_byte, sks + 1);
+ if (scsi_debug_dsense) {
+ sl = sbuff[7] + 8;
+ sbuff[7] = sl;
+ sbuff[sl] = 0x2;
+ sbuff[sl + 1] = 0x6;
+ memcpy(sbuff + sl + 4, sks, 3);
+ } else
+ memcpy(sbuff + 15, sks, 3);
+ if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
+ sdev_printk(KERN_INFO, scp->device, "%s: [sense_key,asc,ascq"
+ "]: [0x5,0x%x,0x0] %c byte=%d, bit=%d\n",
+ my_name, asc, c_d ? 'C' : 'D', in_byte, in_bit);
+}
+
static void mk_sense_buffer(struct scsi_cmnd *scp, int key, int asc, int asq)
{
unsigned char *sbuff;
my_name, key, asc, asq);
}
-static void get_data_transfer_info(unsigned char *cmd,
- unsigned long long *lba, unsigned int *num,
- u32 *ei_lba)
+static void
+mk_sense_invalid_opcode(struct scsi_cmnd *scp)
{
- *ei_lba = 0;
-
- switch (*cmd) {
- case VARIABLE_LENGTH_CMD:
- *lba = (u64)cmd[19] | (u64)cmd[18] << 8 |
- (u64)cmd[17] << 16 | (u64)cmd[16] << 24 |
- (u64)cmd[15] << 32 | (u64)cmd[14] << 40 |
- (u64)cmd[13] << 48 | (u64)cmd[12] << 56;
-
- *ei_lba = (u32)cmd[23] | (u32)cmd[22] << 8 |
- (u32)cmd[21] << 16 | (u32)cmd[20] << 24;
-
- *num = (u32)cmd[31] | (u32)cmd[30] << 8 | (u32)cmd[29] << 16 |
- (u32)cmd[28] << 24;
- break;
-
- case WRITE_SAME_16:
- case WRITE_16:
- case READ_16:
- *lba = (u64)cmd[9] | (u64)cmd[8] << 8 |
- (u64)cmd[7] << 16 | (u64)cmd[6] << 24 |
- (u64)cmd[5] << 32 | (u64)cmd[4] << 40 |
- (u64)cmd[3] << 48 | (u64)cmd[2] << 56;
-
- *num = (u32)cmd[13] | (u32)cmd[12] << 8 | (u32)cmd[11] << 16 |
- (u32)cmd[10] << 24;
- break;
- case WRITE_12:
- case READ_12:
- *lba = (u32)cmd[5] | (u32)cmd[4] << 8 | (u32)cmd[3] << 16 |
- (u32)cmd[2] << 24;
-
- *num = (u32)cmd[9] | (u32)cmd[8] << 8 | (u32)cmd[7] << 16 |
- (u32)cmd[6] << 24;
- break;
- case WRITE_SAME:
- case WRITE_10:
- case READ_10:
- case XDWRITEREAD_10:
- *lba = (u32)cmd[5] | (u32)cmd[4] << 8 | (u32)cmd[3] << 16 |
- (u32)cmd[2] << 24;
-
- *num = (u32)cmd[8] | (u32)cmd[7] << 8;
- break;
- case WRITE_6:
- case READ_6:
- *lba = (u32)cmd[3] | (u32)cmd[2] << 8 |
- (u32)(cmd[1] & 0x1f) << 16;
- *num = (0 == cmd[4]) ? 256 : cmd[4];
- break;
- default:
- break;
- }
+ mk_sense_buffer(scp, ILLEGAL_REQUEST, INVALID_OPCODE, 0);
}
static int scsi_debug_ioctl(struct scsi_device *dev, int cmd, void __user *arg)
if (debug)
cp = "mode parameters changed";
break;
+ case SDEBUG_UA_CAPACITY_CHANGED:
+ mk_sense_buffer(SCpnt, UNIT_ATTENTION,
+ UA_CHANGED_ASC, CAPACITY_CHANGED_ASCQ);
+ if (debug)
+ cp = "capacity data changed";
default:
pr_warn("%s: unexpected unit attention code=%d\n",
__func__, k);
#define SDEBUG_LONG_INQ_SZ 96
#define SDEBUG_MAX_INQ_ARR_SZ 584
-static int resp_inquiry(struct scsi_cmnd *scp, int target,
- struct sdebug_dev_info * devip)
+static int resp_inquiry(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
{
unsigned char pq_pdt;
unsigned char * arr;
unsigned char *cmd = scp->cmnd;
int alloc_len, n, ret;
+ bool have_wlun;
alloc_len = (cmd[3] << 8) + cmd[4];
arr = kzalloc(SDEBUG_MAX_INQ_ARR_SZ, GFP_ATOMIC);
if (! arr)
return DID_REQUEUE << 16;
- if (devip->wlun)
+ have_wlun = (scp->device->lun == SAM2_WLUN_REPORT_LUNS);
+ if (have_wlun)
pq_pdt = 0x1e; /* present, wlun */
else if (scsi_debug_no_lun_0 && (0 == devip->lun))
pq_pdt = 0x7f; /* not present, no device type */
pq_pdt = (scsi_debug_ptype & 0x1f);
arr[0] = pq_pdt;
if (0x2 & cmd[1]) { /* CMDDT bit set */
- mk_sense_buffer(scp, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB,
- 0);
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, 1, 1);
kfree(arr);
return check_condition_result;
} else if (0x1 & cmd[1]) { /* EVPD bit set */
(devip->channel & 0x7f);
if (0 == scsi_debug_vpd_use_hostno)
host_no = 0;
- lu_id_num = devip->wlun ? -1 : (((host_no + 1) * 2000) +
+ lu_id_num = have_wlun ? -1 : (((host_no + 1) * 2000) +
(devip->target * 1000) + devip->lun);
target_dev_id = ((host_no + 1) * 2000) +
(devip->target * 1000) - 3;
arr[1] = cmd[2]; /*sanity */
arr[3] = inquiry_evpd_b2(&arr[4]);
} else {
- /* Illegal request, invalid field in cdb */
- mk_sense_buffer(scp, ILLEGAL_REQUEST,
- INVALID_FIELD_IN_CDB, 0);
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, 2, -1);
kfree(arr);
return check_condition_result;
}
unsigned char * sbuff;
unsigned char *cmd = scp->cmnd;
unsigned char arr[SCSI_SENSE_BUFFERSIZE];
- int want_dsense;
+ bool dsense, want_dsense;
int len = 18;
memset(arr, 0, sizeof(arr));
- want_dsense = !!(cmd[1] & 1) || scsi_debug_dsense;
+ dsense = !!(cmd[1] & 1);
+ want_dsense = dsense || scsi_debug_dsense;
sbuff = scp->sense_buffer;
if ((iec_m_pg[2] & 0x4) && (6 == (iec_m_pg[3] & 0xf))) {
- if (want_dsense) {
+ if (dsense) {
arr[0] = 0x72;
arr[1] = 0x0; /* NO_SENSE in sense_key */
arr[2] = THRESHOLD_EXCEEDED;
arr[3] = 0xff; /* TEST set and MRIE==6 */
+ len = 8;
} else {
arr[0] = 0x70;
arr[2] = 0x0; /* NO_SENSE in sense_key */
}
} else {
memcpy(arr, sbuff, SCSI_SENSE_BUFFERSIZE);
- if ((cmd[1] & 1) && (! scsi_debug_dsense)) {
- /* DESC bit set and sense_buff in fixed format */
- memset(arr, 0, sizeof(arr));
+ if (arr[0] >= 0x70 && dsense == scsi_debug_dsense)
+ ; /* have sense and formats match */
+ else if (arr[0] <= 0x70) {
+ if (dsense) {
+ memset(arr, 0, 8);
+ arr[0] = 0x72;
+ len = 8;
+ } else {
+ memset(arr, 0, 18);
+ arr[0] = 0x70;
+ arr[7] = 0xa;
+ }
+ } else if (dsense) {
+ memset(arr, 0, 8);
arr[0] = 0x72;
arr[1] = sbuff[2]; /* sense key */
arr[2] = sbuff[12]; /* asc */
arr[3] = sbuff[13]; /* ascq */
len = 8;
+ } else {
+ memset(arr, 0, 18);
+ arr[0] = 0x70;
+ arr[2] = sbuff[1];
+ arr[7] = 0xa;
+ arr[12] = sbuff[1];
+ arr[13] = sbuff[3];
}
+
}
mk_sense_buffer(scp, 0, NO_ADDITIONAL_SENSE, 0);
return fill_from_dev_buffer(scp, arr, len);
struct sdebug_dev_info * devip)
{
unsigned char *cmd = scp->cmnd;
- int power_cond, errsts, start;
+ int power_cond, start;
- errsts = check_readiness(scp, UAS_ONLY, devip);
- if (errsts)
- return errsts;
power_cond = (cmd[4] & 0xf0) >> 4;
if (power_cond) {
- mk_sense_buffer(scp, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB,
- 0);
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, 4, 7);
return check_condition_result;
}
start = cmd[4] & 1;
{
unsigned char arr[SDEBUG_READCAP_ARR_SZ];
unsigned int capac;
- int errsts;
- errsts = check_readiness(scp, UAS_ONLY, devip);
- if (errsts)
- return errsts;
/* following just in case virtual_gb changed */
sdebug_capacity = get_sdebug_capacity();
memset(arr, 0, SDEBUG_READCAP_ARR_SZ);
unsigned char *cmd = scp->cmnd;
unsigned char arr[SDEBUG_READCAP16_ARR_SZ];
unsigned long long capac;
- int errsts, k, alloc_len;
+ int k, alloc_len;
- errsts = check_readiness(scp, UAS_ONLY, devip);
- if (errsts)
- return errsts;
alloc_len = ((cmd[10] << 24) + (cmd[11] << 16) + (cmd[12] << 8)
+ cmd[13]);
/* following just in case virtual_gb changed */
return ret;
}
+static int
+resp_rsup_opcodes(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
+{
+ bool rctd;
+ u8 reporting_opts, req_opcode, sdeb_i, supp;
+ u16 req_sa, u;
+ u32 alloc_len, a_len;
+ int k, offset, len, errsts, count, bump, na;
+ const struct opcode_info_t *oip;
+ const struct opcode_info_t *r_oip;
+ u8 *arr;
+ u8 *cmd = scp->cmnd;
+
+ rctd = !!(cmd[2] & 0x80);
+ reporting_opts = cmd[2] & 0x7;
+ req_opcode = cmd[3];
+ req_sa = get_unaligned_be16(cmd + 4);
+ alloc_len = get_unaligned_be32(cmd + 6);
+ if (alloc_len < 4 && alloc_len > 0xffff) {
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, 6, -1);
+ return check_condition_result;
+ }
+ if (alloc_len > 8192)
+ a_len = 8192;
+ else
+ a_len = alloc_len;
+ arr = kzalloc((a_len < 256) ? 320 : a_len + 64, GFP_KERNEL);
+ if (NULL == arr) {
+ mk_sense_buffer(scp, ILLEGAL_REQUEST, INSUFF_RES_ASC,
+ INSUFF_RES_ASCQ);
+ return check_condition_result;
+ }
+ switch (reporting_opts) {
+ case 0: /* all commands */
+ /* count number of commands */
+ for (count = 0, oip = opcode_info_arr;
+ oip->num_attached != 0xff; ++oip) {
+ if (F_INV_OP & oip->flags)
+ continue;
+ count += (oip->num_attached + 1);
+ }
+ bump = rctd ? 20 : 8;
+ put_unaligned_be32(count * bump, arr);
+ for (offset = 4, oip = opcode_info_arr;
+ oip->num_attached != 0xff && offset < a_len; ++oip) {
+ if (F_INV_OP & oip->flags)
+ continue;
+ na = oip->num_attached;
+ arr[offset] = oip->opcode;
+ put_unaligned_be16(oip->sa, arr + offset + 2);
+ if (rctd)
+ arr[offset + 5] |= 0x2;
+ if (FF_SA & oip->flags)
+ arr[offset + 5] |= 0x1;
+ put_unaligned_be16(oip->len_mask[0], arr + offset + 6);
+ if (rctd)
+ put_unaligned_be16(0xa, arr + offset + 8);
+ r_oip = oip;
+ for (k = 0, oip = oip->arrp; k < na; ++k, ++oip) {
+ if (F_INV_OP & oip->flags)
+ continue;
+ offset += bump;
+ arr[offset] = oip->opcode;
+ put_unaligned_be16(oip->sa, arr + offset + 2);
+ if (rctd)
+ arr[offset + 5] |= 0x2;
+ if (FF_SA & oip->flags)
+ arr[offset + 5] |= 0x1;
+ put_unaligned_be16(oip->len_mask[0],
+ arr + offset + 6);
+ if (rctd)
+ put_unaligned_be16(0xa,
+ arr + offset + 8);
+ }
+ oip = r_oip;
+ offset += bump;
+ }
+ break;
+ case 1: /* one command: opcode only */
+ case 2: /* one command: opcode plus service action */
+ case 3: /* one command: if sa==0 then opcode only else opcode+sa */
+ sdeb_i = opcode_ind_arr[req_opcode];
+ oip = &opcode_info_arr[sdeb_i];
+ if (F_INV_OP & oip->flags) {
+ supp = 1;
+ offset = 4;
+ } else {
+ if (1 == reporting_opts) {
+ if (FF_SA & oip->flags) {
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB,
+ 2, 2);
+ kfree(arr);
+ return check_condition_result;
+ }
+ req_sa = 0;
+ } else if (2 == reporting_opts &&
+ 0 == (FF_SA & oip->flags)) {
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, 4, -1);
+ kfree(arr); /* point at requested sa */
+ return check_condition_result;
+ }
+ if (0 == (FF_SA & oip->flags) &&
+ req_opcode == oip->opcode)
+ supp = 3;
+ else if (0 == (FF_SA & oip->flags)) {
+ na = oip->num_attached;
+ for (k = 0, oip = oip->arrp; k < na;
+ ++k, ++oip) {
+ if (req_opcode == oip->opcode)
+ break;
+ }
+ supp = (k >= na) ? 1 : 3;
+ } else if (req_sa != oip->sa) {
+ na = oip->num_attached;
+ for (k = 0, oip = oip->arrp; k < na;
+ ++k, ++oip) {
+ if (req_sa == oip->sa)
+ break;
+ }
+ supp = (k >= na) ? 1 : 3;
+ } else
+ supp = 3;
+ if (3 == supp) {
+ u = oip->len_mask[0];
+ put_unaligned_be16(u, arr + 2);
+ arr[4] = oip->opcode;
+ for (k = 1; k < u; ++k)
+ arr[4 + k] = (k < 16) ?
+ oip->len_mask[k] : 0xff;
+ offset = 4 + u;
+ } else
+ offset = 4;
+ }
+ arr[1] = (rctd ? 0x80 : 0) | supp;
+ if (rctd) {
+ put_unaligned_be16(0xa, arr + offset);
+ offset += 12;
+ }
+ break;
+ default:
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, 2, 2);
+ kfree(arr);
+ return check_condition_result;
+ }
+ offset = (offset < a_len) ? offset : a_len;
+ len = (offset < alloc_len) ? offset : alloc_len;
+ errsts = fill_from_dev_buffer(scp, arr, len);
+ kfree(arr);
+ return errsts;
+}
+
+static int
+resp_rsup_tmfs(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
+{
+ bool repd;
+ u32 alloc_len, len;
+ u8 arr[16];
+ u8 *cmd = scp->cmnd;
+
+ memset(arr, 0, sizeof(arr));
+ repd = !!(cmd[2] & 0x80);
+ alloc_len = get_unaligned_be32(cmd + 6);
+ if (alloc_len < 4) {
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, 6, -1);
+ return check_condition_result;
+ }
+ arr[0] = 0xc8; /* ATS | ATSS | LURS */
+ arr[1] = 0x1; /* ITNRS */
+ if (repd) {
+ arr[3] = 0xc;
+ len = 16;
+ } else
+ len = 4;
+
+ len = (len < alloc_len) ? len : alloc_len;
+ return fill_from_dev_buffer(scp, arr, len);
+}
+
/* <<Following mode page info copied from ST318451LW>> */
static int resp_err_recov_pg(unsigned char * p, int pcontrol, int target)
#define SDEBUG_MAX_MSENSE_SZ 256
-static int resp_mode_sense(struct scsi_cmnd * scp, int target,
- struct sdebug_dev_info * devip)
+static int
+resp_mode_sense(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
{
unsigned char dbd, llbaa;
int pcontrol, pcode, subpcode, bd_len;
unsigned char dev_spec;
- int k, alloc_len, msense_6, offset, len, errsts, target_dev_id;
+ int k, alloc_len, msense_6, offset, len, target_dev_id;
+ int target = scp->device->id;
unsigned char * ap;
unsigned char arr[SDEBUG_MAX_MSENSE_SZ];
unsigned char *cmd = scp->cmnd;
- errsts = check_readiness(scp, UAS_ONLY, devip);
- if (errsts)
- return errsts;
dbd = !!(cmd[1] & 0x8);
pcontrol = (cmd[2] & 0xc0) >> 6;
pcode = cmd[2] & 0x3f;
if ((subpcode > 0x0) && (subpcode < 0xff) && (0x19 != pcode)) {
/* TODO: Control Extension page */
- mk_sense_buffer(scp, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB,
- 0);
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
return check_condition_result;
}
switch (pcode) {
break;
case 0x19: /* if spc==1 then sas phy, control+discover */
if ((subpcode > 0x2) && (subpcode < 0xff)) {
- mk_sense_buffer(scp, ILLEGAL_REQUEST,
- INVALID_FIELD_IN_CDB, 0);
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
return check_condition_result;
}
len = 0;
}
len += resp_iec_m_pg(ap + len, pcontrol, target);
} else {
- mk_sense_buffer(scp, ILLEGAL_REQUEST,
- INVALID_FIELD_IN_CDB, 0);
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
return check_condition_result;
}
offset += len;
break;
default:
- mk_sense_buffer(scp, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB,
- 0);
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, 2, 5);
return check_condition_result;
}
if (msense_6)
#define SDEBUG_MAX_MSELECT_SZ 512
-static int resp_mode_select(struct scsi_cmnd * scp, int mselect6,
- struct sdebug_dev_info * devip)
+static int
+resp_mode_select(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
{
int pf, sp, ps, md_len, bd_len, off, spf, pg_len;
- int param_len, res, errsts, mpage;
+ int param_len, res, mpage;
unsigned char arr[SDEBUG_MAX_MSELECT_SZ];
unsigned char *cmd = scp->cmnd;
+ int mselect6 = (MODE_SELECT == cmd[0]);
- errsts = check_readiness(scp, UAS_ONLY, devip);
- if (errsts)
- return errsts;
memset(arr, 0, sizeof(arr));
pf = cmd[1] & 0x10;
sp = cmd[1] & 0x1;
param_len = mselect6 ? cmd[4] : ((cmd[7] << 8) + cmd[8]);
if ((0 == pf) || sp || (param_len > SDEBUG_MAX_MSELECT_SZ)) {
- mk_sense_buffer(scp, ILLEGAL_REQUEST,
- INVALID_FIELD_IN_CDB, 0);
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, mselect6 ? 4 : 7, -1);
return check_condition_result;
}
res = fetch_to_dev_buffer(scp, arr, param_len);
md_len = mselect6 ? (arr[0] + 1) : ((arr[0] << 8) + arr[1] + 2);
bd_len = mselect6 ? arr[3] : ((arr[6] << 8) + arr[7]);
if (md_len > 2) {
- mk_sense_buffer(scp, ILLEGAL_REQUEST,
- INVALID_FIELD_IN_PARAM_LIST, 0);
+ mk_sense_invalid_fld(scp, SDEB_IN_DATA, 0, -1);
return check_condition_result;
}
off = bd_len + (mselect6 ? 4 : 8);
mpage = arr[off] & 0x3f;
ps = !!(arr[off] & 0x80);
if (ps) {
- mk_sense_buffer(scp, ILLEGAL_REQUEST,
- INVALID_FIELD_IN_PARAM_LIST, 0);
+ mk_sense_invalid_fld(scp, SDEB_IN_DATA, off, 7);
return check_condition_result;
}
spf = !!(arr[off] & 0x40);
default:
break;
}
- mk_sense_buffer(scp, ILLEGAL_REQUEST,
- INVALID_FIELD_IN_PARAM_LIST, 0);
+ mk_sense_invalid_fld(scp, SDEB_IN_DATA, off, 5);
return check_condition_result;
set_mode_changed_ua:
set_bit(SDEBUG_UA_MODE_CHANGED, devip->uas_bm);
static int resp_log_sense(struct scsi_cmnd * scp,
struct sdebug_dev_info * devip)
{
- int ppc, sp, pcontrol, pcode, subpcode, alloc_len, errsts, len, n;
+ int ppc, sp, pcontrol, pcode, subpcode, alloc_len, len, n;
unsigned char arr[SDEBUG_MAX_LSENSE_SZ];
unsigned char *cmd = scp->cmnd;
- errsts = check_readiness(scp, UAS_ONLY, devip);
- if (errsts)
- return errsts;
memset(arr, 0, sizeof(arr));
ppc = cmd[1] & 0x2;
sp = cmd[1] & 0x1;
if (ppc || sp) {
- mk_sense_buffer(scp, ILLEGAL_REQUEST,
- INVALID_FIELD_IN_CDB, 0);
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, 1, ppc ? 1 : 0);
return check_condition_result;
}
pcontrol = (cmd[2] & 0xc0) >> 6;
arr[3] = resp_ie_l_pg(arr + 4);
break;
default:
- mk_sense_buffer(scp, ILLEGAL_REQUEST,
- INVALID_FIELD_IN_CDB, 0);
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, 2, 5);
return check_condition_result;
}
} else if (0xff == subpcode) {
arr[3] = n - 4;
break;
default:
- mk_sense_buffer(scp, ILLEGAL_REQUEST,
- INVALID_FIELD_IN_CDB, 0);
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, 2, 5);
return check_condition_result;
}
} else {
- mk_sense_buffer(scp, ILLEGAL_REQUEST,
- INVALID_FIELD_IN_CDB, 0);
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, 3, -1);
return check_condition_result;
}
len = min(((arr[2] << 8) + arr[3]) + 4, alloc_len);
unsigned long long lba, unsigned int num)
{
if (lba + num > sdebug_capacity) {
- mk_sense_buffer(scp, ILLEGAL_REQUEST, ADDR_OUT_OF_RANGE, 0);
+ mk_sense_buffer(scp, ILLEGAL_REQUEST, LBA_OUT_OF_RANGE, 0);
return check_condition_result;
}
/* transfer length excessive (tie in to block limits VPD page) */
if (num > sdebug_store_sectors) {
+ /* needs work to find which cdb byte 'num' comes from */
mk_sense_buffer(scp, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB, 0);
return check_condition_result;
}
}
/* Returns number of bytes copied or -1 if error. */
-static int do_device_access(struct scsi_cmnd *scmd,
- unsigned long long lba, unsigned int num, int write)
+static int
+do_device_access(struct scsi_cmnd *scmd, u64 lba, u32 num, bool do_write)
{
int ret;
- unsigned long long block, rest = 0;
+ u64 block, rest = 0;
struct scsi_data_buffer *sdb;
enum dma_data_direction dir;
size_t (*func)(struct scatterlist *, unsigned int, void *, size_t,
off_t);
- if (write) {
+ if (do_write) {
sdb = scsi_out(scmd);
dir = DMA_TO_DEVICE;
func = sg_pcopy_to_buffer;
return ret;
}
+/* If fake_store(lba,num) compares equal to arr(num), then copy top half of
+ * arr into fake_store(lba,num) and return true. If comparison fails then
+ * return false. */
+static bool
+comp_write_worker(u64 lba, u32 num, const u8 *arr)
+{
+ bool res;
+ u64 block, rest = 0;
+ u32 store_blks = sdebug_store_sectors;
+ u32 lb_size = scsi_debug_sector_size;
+
+ block = do_div(lba, store_blks);
+ if (block + num > store_blks)
+ rest = block + num - store_blks;
+
+ res = !memcmp(fake_storep + (block * lb_size), arr,
+ (num - rest) * lb_size);
+ if (!res)
+ return res;
+ if (rest)
+ res = memcmp(fake_storep, arr + ((num - rest) * lb_size),
+ rest * lb_size);
+ if (!res)
+ return res;
+ arr += num * lb_size;
+ memcpy(fake_storep + (block * lb_size), arr, (num - rest) * lb_size);
+ if (rest)
+ memcpy(fake_storep, arr + ((num - rest) * lb_size),
+ rest * lb_size);
+ return res;
+}
+
static __be16 dif_compute_csum(const void *buf, int len)
{
__be16 csum;
return 0;
}
-static int resp_read(struct scsi_cmnd *SCpnt, unsigned long long lba,
- unsigned int num, u32 ei_lba)
+static int
+resp_read_dt0(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
{
+ u8 *cmd = scp->cmnd;
+ u64 lba;
+ u32 num;
+ u32 ei_lba;
unsigned long iflags;
int ret;
+ bool check_prot;
- ret = check_device_access_params(SCpnt, lba, num);
- if (ret)
- return ret;
+ switch (cmd[0]) {
+ case READ_16:
+ ei_lba = 0;
+ lba = get_unaligned_be64(cmd + 2);
+ num = get_unaligned_be32(cmd + 10);
+ check_prot = true;
+ break;
+ case READ_10:
+ ei_lba = 0;
+ lba = get_unaligned_be32(cmd + 2);
+ num = get_unaligned_be16(cmd + 7);
+ check_prot = true;
+ break;
+ case READ_6:
+ ei_lba = 0;
+ lba = (u32)cmd[3] | (u32)cmd[2] << 8 |
+ (u32)(cmd[1] & 0x1f) << 16;
+ num = (0 == cmd[4]) ? 256 : cmd[4];
+ check_prot = true;
+ break;
+ case READ_12:
+ ei_lba = 0;
+ lba = get_unaligned_be32(cmd + 2);
+ num = get_unaligned_be32(cmd + 6);
+ check_prot = true;
+ break;
+ case XDWRITEREAD_10:
+ ei_lba = 0;
+ lba = get_unaligned_be32(cmd + 2);
+ num = get_unaligned_be16(cmd + 7);
+ check_prot = false;
+ break;
+ default: /* assume READ(32) */
+ lba = get_unaligned_be64(cmd + 12);
+ ei_lba = get_unaligned_be32(cmd + 20);
+ num = get_unaligned_be32(cmd + 28);
+ check_prot = false;
+ break;
+ }
+ if (check_prot) {
+ if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
+ (cmd[1] & 0xe0)) {
+ mk_sense_invalid_opcode(scp);
+ return check_condition_result;
+ }
+ if ((scsi_debug_dif == SD_DIF_TYPE1_PROTECTION ||
+ scsi_debug_dif == SD_DIF_TYPE3_PROTECTION) &&
+ (cmd[1] & 0xe0) == 0)
+ sdev_printk(KERN_ERR, scp->device, "Unprotected RD "
+ "to DIF device\n");
+ }
+ if (sdebug_any_injecting_opt) {
+ struct sdebug_scmd_extra_t *ep = scsi_cmd_priv(scp);
+
+ if (ep->inj_short)
+ num /= 2;
+ }
+
+ /* inline check_device_access_params() */
+ if (lba + num > sdebug_capacity) {
+ mk_sense_buffer(scp, ILLEGAL_REQUEST, LBA_OUT_OF_RANGE, 0);
+ return check_condition_result;
+ }
+ /* transfer length excessive (tie in to block limits VPD page) */
+ if (num > sdebug_store_sectors) {
+ /* needs work to find which cdb byte 'num' comes from */
+ mk_sense_buffer(scp, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB, 0);
+ return check_condition_result;
+ }
if ((SCSI_DEBUG_OPT_MEDIUM_ERR & scsi_debug_opts) &&
(lba <= (OPT_MEDIUM_ERR_ADDR + OPT_MEDIUM_ERR_NUM - 1)) &&
((lba + num) > OPT_MEDIUM_ERR_ADDR)) {
/* claim unrecoverable read error */
- mk_sense_buffer(SCpnt, MEDIUM_ERROR, UNRECOVERED_READ_ERR, 0);
+ mk_sense_buffer(scp, MEDIUM_ERROR, UNRECOVERED_READ_ERR, 0);
/* set info field and valid bit for fixed descriptor */
- if (0x70 == (SCpnt->sense_buffer[0] & 0x7f)) {
- SCpnt->sense_buffer[0] |= 0x80; /* Valid bit */
+ if (0x70 == (scp->sense_buffer[0] & 0x7f)) {
+ scp->sense_buffer[0] |= 0x80; /* Valid bit */
ret = (lba < OPT_MEDIUM_ERR_ADDR)
? OPT_MEDIUM_ERR_ADDR : (int)lba;
- SCpnt->sense_buffer[3] = (ret >> 24) & 0xff;
- SCpnt->sense_buffer[4] = (ret >> 16) & 0xff;
- SCpnt->sense_buffer[5] = (ret >> 8) & 0xff;
- SCpnt->sense_buffer[6] = ret & 0xff;
+ put_unaligned_be32(ret, scp->sense_buffer + 3);
}
- scsi_set_resid(SCpnt, scsi_bufflen(SCpnt));
+ scsi_set_resid(scp, scsi_bufflen(scp));
return check_condition_result;
}
read_lock_irqsave(&atomic_rw, iflags);
/* DIX + T10 DIF */
- if (scsi_debug_dix && scsi_prot_sg_count(SCpnt)) {
- int prot_ret = prot_verify_read(SCpnt, lba, num, ei_lba);
+ if (scsi_debug_dix && scsi_prot_sg_count(scp)) {
+ int prot_ret = prot_verify_read(scp, lba, num, ei_lba);
if (prot_ret) {
read_unlock_irqrestore(&atomic_rw, iflags);
- mk_sense_buffer(SCpnt, ABORTED_COMMAND, 0x10, prot_ret);
+ mk_sense_buffer(scp, ABORTED_COMMAND, 0x10, prot_ret);
return illegal_condition_result;
}
}
- ret = do_device_access(SCpnt, lba, num, 0);
+ ret = do_device_access(scp, lba, num, false);
read_unlock_irqrestore(&atomic_rw, iflags);
if (ret == -1)
return DID_ERROR << 16;
- scsi_in(SCpnt)->resid = scsi_bufflen(SCpnt) - ret;
+ scsi_in(scp)->resid = scsi_bufflen(scp) - ret;
+
+ if (sdebug_any_injecting_opt) {
+ struct sdebug_scmd_extra_t *ep = scsi_cmd_priv(scp);
+ if (ep->inj_recovered) {
+ mk_sense_buffer(scp, RECOVERED_ERROR,
+ THRESHOLD_EXCEEDED, 0);
+ return check_condition_result;
+ } else if (ep->inj_transport) {
+ mk_sense_buffer(scp, ABORTED_COMMAND,
+ TRANSPORT_PROBLEM, ACK_NAK_TO);
+ return check_condition_result;
+ } else if (ep->inj_dif) {
+ /* Logical block guard check failed */
+ mk_sense_buffer(scp, ABORTED_COMMAND, 0x10, 1);
+ return illegal_condition_result;
+ } else if (ep->inj_dix) {
+ mk_sense_buffer(scp, ILLEGAL_REQUEST, 0x10, 1);
+ return illegal_condition_result;
+ }
+ }
return 0;
}
}
}
-static int resp_write(struct scsi_cmnd *SCpnt, unsigned long long lba,
- unsigned int num, u32 ei_lba)
+static int
+resp_write_dt0(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
{
+ u8 *cmd = scp->cmnd;
+ u64 lba;
+ u32 num;
+ u32 ei_lba;
unsigned long iflags;
int ret;
+ bool check_prot;
- ret = check_device_access_params(SCpnt, lba, num);
- if (ret)
- return ret;
+ switch (cmd[0]) {
+ case WRITE_16:
+ ei_lba = 0;
+ lba = get_unaligned_be64(cmd + 2);
+ num = get_unaligned_be32(cmd + 10);
+ check_prot = true;
+ break;
+ case WRITE_10:
+ ei_lba = 0;
+ lba = get_unaligned_be32(cmd + 2);
+ num = get_unaligned_be16(cmd + 7);
+ check_prot = true;
+ break;
+ case WRITE_6:
+ ei_lba = 0;
+ lba = (u32)cmd[3] | (u32)cmd[2] << 8 |
+ (u32)(cmd[1] & 0x1f) << 16;
+ num = (0 == cmd[4]) ? 256 : cmd[4];
+ check_prot = true;
+ break;
+ case WRITE_12:
+ ei_lba = 0;
+ lba = get_unaligned_be32(cmd + 2);
+ num = get_unaligned_be32(cmd + 6);
+ check_prot = true;
+ break;
+ case 0x53: /* XDWRITEREAD(10) */
+ ei_lba = 0;
+ lba = get_unaligned_be32(cmd + 2);
+ num = get_unaligned_be16(cmd + 7);
+ check_prot = false;
+ break;
+ default: /* assume WRITE(32) */
+ lba = get_unaligned_be64(cmd + 12);
+ ei_lba = get_unaligned_be32(cmd + 20);
+ num = get_unaligned_be32(cmd + 28);
+ check_prot = false;
+ break;
+ }
+ if (check_prot) {
+ if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
+ (cmd[1] & 0xe0)) {
+ mk_sense_invalid_opcode(scp);
+ return check_condition_result;
+ }
+ if ((scsi_debug_dif == SD_DIF_TYPE1_PROTECTION ||
+ scsi_debug_dif == SD_DIF_TYPE3_PROTECTION) &&
+ (cmd[1] & 0xe0) == 0)
+ sdev_printk(KERN_ERR, scp->device, "Unprotected WR "
+ "to DIF device\n");
+ }
+
+ /* inline check_device_access_params() */
+ if (lba + num > sdebug_capacity) {
+ mk_sense_buffer(scp, ILLEGAL_REQUEST, LBA_OUT_OF_RANGE, 0);
+ return check_condition_result;
+ }
+ /* transfer length excessive (tie in to block limits VPD page) */
+ if (num > sdebug_store_sectors) {
+ /* needs work to find which cdb byte 'num' comes from */
+ mk_sense_buffer(scp, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB, 0);
+ return check_condition_result;
+ }
write_lock_irqsave(&atomic_rw, iflags);
/* DIX + T10 DIF */
- if (scsi_debug_dix && scsi_prot_sg_count(SCpnt)) {
- int prot_ret = prot_verify_write(SCpnt, lba, num, ei_lba);
+ if (scsi_debug_dix && scsi_prot_sg_count(scp)) {
+ int prot_ret = prot_verify_write(scp, lba, num, ei_lba);
if (prot_ret) {
write_unlock_irqrestore(&atomic_rw, iflags);
- mk_sense_buffer(SCpnt, ILLEGAL_REQUEST, 0x10,
- prot_ret);
+ mk_sense_buffer(scp, ILLEGAL_REQUEST, 0x10, prot_ret);
return illegal_condition_result;
}
}
- ret = do_device_access(SCpnt, lba, num, 1);
+ ret = do_device_access(scp, lba, num, true);
if (scsi_debug_lbp())
map_region(lba, num);
write_unlock_irqrestore(&atomic_rw, iflags);
return (DID_ERROR << 16);
else if ((ret < (num * scsi_debug_sector_size)) &&
(SCSI_DEBUG_OPT_NOISE & scsi_debug_opts))
- sdev_printk(KERN_INFO, SCpnt->device,
+ sdev_printk(KERN_INFO, scp->device,
"%s: write: cdb indicated=%u, IO sent=%d bytes\n",
my_name, num * scsi_debug_sector_size, ret);
+ if (sdebug_any_injecting_opt) {
+ struct sdebug_scmd_extra_t *ep = scsi_cmd_priv(scp);
+
+ if (ep->inj_recovered) {
+ mk_sense_buffer(scp, RECOVERED_ERROR,
+ THRESHOLD_EXCEEDED, 0);
+ return check_condition_result;
+ } else if (ep->inj_dif) {
+ /* Logical block guard check failed */
+ mk_sense_buffer(scp, ABORTED_COMMAND, 0x10, 1);
+ return illegal_condition_result;
+ } else if (ep->inj_dix) {
+ mk_sense_buffer(scp, ILLEGAL_REQUEST, 0x10, 1);
+ return illegal_condition_result;
+ }
+ }
return 0;
}
-static int resp_write_same(struct scsi_cmnd *scmd, unsigned long long lba,
- unsigned int num, u32 ei_lba, unsigned int unmap)
+static int
+resp_write_same(struct scsi_cmnd *scp, u64 lba, u32 num, u32 ei_lba,
+ bool unmap, bool ndob)
{
unsigned long iflags;
unsigned long long i;
int ret;
- ret = check_device_access_params(scmd, lba, num);
+ ret = check_device_access_params(scp, lba, num);
if (ret)
return ret;
- if (num > scsi_debug_write_same_length) {
- mk_sense_buffer(scmd, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB,
- 0);
- return check_condition_result;
- }
-
write_lock_irqsave(&atomic_rw, iflags);
if (unmap && scsi_debug_lbp()) {
goto out;
}
- /* Else fetch one logical block */
- ret = fetch_to_dev_buffer(scmd,
- fake_storep + (lba * scsi_debug_sector_size),
- scsi_debug_sector_size);
+ /* if ndob then zero 1 logical block, else fetch 1 logical block */
+ if (ndob) {
+ memset(fake_storep + (lba * scsi_debug_sector_size), 0,
+ scsi_debug_sector_size);
+ ret = 0;
+ } else
+ ret = fetch_to_dev_buffer(scp, fake_storep +
+ (lba * scsi_debug_sector_size),
+ scsi_debug_sector_size);
if (-1 == ret) {
write_unlock_irqrestore(&atomic_rw, iflags);
return (DID_ERROR << 16);
} else if ((ret < (num * scsi_debug_sector_size)) &&
(SCSI_DEBUG_OPT_NOISE & scsi_debug_opts))
- sdev_printk(KERN_INFO, scmd->device,
+ sdev_printk(KERN_INFO, scp->device,
"%s: %s: cdb indicated=%u, IO sent=%d bytes\n",
my_name, "write same",
num * scsi_debug_sector_size, ret);
return 0;
}
-struct unmap_block_desc {
- __be64 lba;
- __be32 blocks;
- __be32 __reserved;
-};
+static int
+resp_write_same_10(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
+{
+ u8 *cmd = scp->cmnd;
+ u32 lba;
+ u16 num;
+ u32 ei_lba = 0;
+ bool unmap = false;
+
+ if (cmd[1] & 0x8) {
+ if (scsi_debug_lbpws10 == 0) {
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, 1, 3);
+ return check_condition_result;
+ } else
+ unmap = true;
+ }
+ lba = get_unaligned_be32(cmd + 2);
+ num = get_unaligned_be16(cmd + 7);
+ if (num > scsi_debug_write_same_length) {
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, 7, -1);
+ return check_condition_result;
+ }
+ return resp_write_same(scp, lba, num, ei_lba, unmap, false);
+}
-static int resp_unmap(struct scsi_cmnd * scmd, struct sdebug_dev_info * devip)
+static int
+resp_write_same_16(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
{
- unsigned char *buf;
+ u8 *cmd = scp->cmnd;
+ u64 lba;
+ u32 num;
+ u32 ei_lba = 0;
+ bool unmap = false;
+ bool ndob = false;
+
+ if (cmd[1] & 0x8) { /* UNMAP */
+ if (scsi_debug_lbpws == 0) {
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, 1, 3);
+ return check_condition_result;
+ } else
+ unmap = true;
+ }
+ if (cmd[1] & 0x1) /* NDOB (no data-out buffer, assumes zeroes) */
+ ndob = true;
+ lba = get_unaligned_be64(cmd + 2);
+ num = get_unaligned_be32(cmd + 10);
+ if (num > scsi_debug_write_same_length) {
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, 10, -1);
+ return check_condition_result;
+ }
+ return resp_write_same(scp, lba, num, ei_lba, unmap, ndob);
+}
+
+static int
+resp_comp_write(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
+{
+ u8 *cmd = scp->cmnd;
+ u8 *arr;
+ u8 *fake_storep_hold;
+ u64 lba;
+ u32 dnum;
+ u32 lb_size = scsi_debug_sector_size;
+ u8 num;
+ unsigned long iflags;
+ int ret;
+
+ lba = get_unaligned_be32(cmd + 2);
+ num = cmd[13]; /* 1 to a maximum of 255 logical blocks */
+ if (0 == num)
+ return 0; /* degenerate case, not an error */
+ dnum = 2 * num;
+ arr = kzalloc(dnum * lb_size, GFP_ATOMIC);
+ if (NULL == arr) {
+ mk_sense_buffer(scp, ILLEGAL_REQUEST, INSUFF_RES_ASC,
+ INSUFF_RES_ASCQ);
+ return check_condition_result;
+ }
+ if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
+ (cmd[1] & 0xe0)) {
+ mk_sense_invalid_opcode(scp);
+ return check_condition_result;
+ }
+ if ((scsi_debug_dif == SD_DIF_TYPE1_PROTECTION ||
+ scsi_debug_dif == SD_DIF_TYPE3_PROTECTION) &&
+ (cmd[1] & 0xe0) == 0)
+ sdev_printk(KERN_ERR, scp->device, "Unprotected WR "
+ "to DIF device\n");
+
+ /* inline check_device_access_params() */
+ if (lba + num > sdebug_capacity) {
+ mk_sense_buffer(scp, ILLEGAL_REQUEST, LBA_OUT_OF_RANGE, 0);
+ return check_condition_result;
+ }
+ /* transfer length excessive (tie in to block limits VPD page) */
+ if (num > sdebug_store_sectors) {
+ /* needs work to find which cdb byte 'num' comes from */
+ mk_sense_buffer(scp, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB, 0);
+ return check_condition_result;
+ }
+
+ write_lock_irqsave(&atomic_rw, iflags);
+
+ /* trick do_device_access() to fetch both compare and write buffers
+ * from data-in into arr. Safe (atomic) since write_lock held. */
+ fake_storep_hold = fake_storep;
+ fake_storep = arr;
+ ret = do_device_access(scp, 0, dnum, true);
+ fake_storep = fake_storep_hold;
+ if (ret == -1) {
+ write_unlock_irqrestore(&atomic_rw, iflags);
+ kfree(arr);
+ return DID_ERROR << 16;
+ } else if ((ret < (dnum * lb_size)) &&
+ (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts))
+ sdev_printk(KERN_INFO, scp->device, "%s: compare_write: cdb "
+ "indicated=%u, IO sent=%d bytes\n", my_name,
+ dnum * lb_size, ret);
+ if (!comp_write_worker(lba, num, arr)) {
+ write_unlock_irqrestore(&atomic_rw, iflags);
+ kfree(arr);
+ mk_sense_buffer(scp, MISCOMPARE, MISCOMPARE_VERIFY_ASC, 0);
+ return check_condition_result;
+ }
+ if (scsi_debug_lbp())
+ map_region(lba, num);
+ write_unlock_irqrestore(&atomic_rw, iflags);
+ return 0;
+}
+
+struct unmap_block_desc {
+ __be64 lba;
+ __be32 blocks;
+ __be32 __reserved;
+};
+
+static int
+resp_unmap(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
+{
+ unsigned char *buf;
struct unmap_block_desc *desc;
unsigned int i, payload_len, descriptors;
int ret;
unsigned long iflags;
- ret = check_readiness(scmd, UAS_ONLY, devip);
- if (ret)
- return ret;
- payload_len = get_unaligned_be16(&scmd->cmnd[7]);
- BUG_ON(scsi_bufflen(scmd) != payload_len);
+ if (!scsi_debug_lbp())
+ return 0; /* fib and say its done */
+ payload_len = get_unaligned_be16(scp->cmnd + 7);
+ BUG_ON(scsi_bufflen(scp) != payload_len);
descriptors = (payload_len - 8) / 16;
+ if (descriptors > scsi_debug_unmap_max_desc) {
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, 7, -1);
+ return check_condition_result;
+ }
- buf = kmalloc(scsi_bufflen(scmd), GFP_ATOMIC);
- if (!buf)
+ buf = kmalloc(scsi_bufflen(scp), GFP_ATOMIC);
+ if (!buf) {
+ mk_sense_buffer(scp, ILLEGAL_REQUEST, INSUFF_RES_ASC,
+ INSUFF_RES_ASCQ);
return check_condition_result;
+ }
- scsi_sg_copy_to_buffer(scmd, buf, scsi_bufflen(scmd));
+ scsi_sg_copy_to_buffer(scp, buf, scsi_bufflen(scp));
BUG_ON(get_unaligned_be16(&buf[0]) != payload_len - 2);
BUG_ON(get_unaligned_be16(&buf[2]) != descriptors * 16);
unsigned long long lba = get_unaligned_be64(&desc[i].lba);
unsigned int num = get_unaligned_be32(&desc[i].blocks);
- ret = check_device_access_params(scmd, lba, num);
+ ret = check_device_access_params(scp, lba, num);
if (ret)
goto out;
#define SDEBUG_GET_LBA_STATUS_LEN 32
-static int resp_get_lba_status(struct scsi_cmnd * scmd,
- struct sdebug_dev_info * devip)
+static int
+resp_get_lba_status(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
{
- unsigned long long lba;
- unsigned int alloc_len, mapped, num;
- unsigned char arr[SDEBUG_GET_LBA_STATUS_LEN];
+ u8 *cmd = scp->cmnd;
+ u64 lba;
+ u32 alloc_len, mapped, num;
+ u8 arr[SDEBUG_GET_LBA_STATUS_LEN];
int ret;
- ret = check_readiness(scmd, UAS_ONLY, devip);
- if (ret)
- return ret;
-
- lba = get_unaligned_be64(&scmd->cmnd[2]);
- alloc_len = get_unaligned_be32(&scmd->cmnd[10]);
+ lba = get_unaligned_be64(cmd + 2);
+ alloc_len = get_unaligned_be32(cmd + 10);
if (alloc_len < 24)
return 0;
- ret = check_device_access_params(scmd, lba, 1);
+ ret = check_device_access_params(scp, lba, 1);
if (ret)
return ret;
- mapped = map_state(lba, &num);
+ if (scsi_debug_lbp())
+ mapped = map_state(lba, &num);
+ else {
+ mapped = 1;
+ /* following just in case virtual_gb changed */
+ sdebug_capacity = get_sdebug_capacity();
+ if (sdebug_capacity - lba <= 0xffffffff)
+ num = sdebug_capacity - lba;
+ else
+ num = 0xffffffff;
+ }
memset(arr, 0, SDEBUG_GET_LBA_STATUS_LEN);
- put_unaligned_be32(20, &arr[0]); /* Parameter Data Length */
- put_unaligned_be64(lba, &arr[8]); /* LBA */
- put_unaligned_be32(num, &arr[16]); /* Number of blocks */
- arr[20] = !mapped; /* mapped = 0, unmapped = 1 */
+ put_unaligned_be32(20, arr); /* Parameter Data Length */
+ put_unaligned_be64(lba, arr + 8); /* LBA */
+ put_unaligned_be32(num, arr + 16); /* Number of blocks */
+ arr[20] = !mapped; /* prov_stat=0: mapped; 1: dealloc */
- return fill_from_dev_buffer(scmd, arr, SDEBUG_GET_LBA_STATUS_LEN);
+ return fill_from_dev_buffer(scp, arr, SDEBUG_GET_LBA_STATUS_LEN);
}
#define SDEBUG_RLUN_ARR_SZ 256
struct sdebug_dev_info * devip)
{
unsigned int alloc_len;
- int lun_cnt, i, upper, num, n;
- u64 wlun, lun;
+ int lun_cnt, i, upper, num, n, want_wlun, shortish;
+ u64 lun;
unsigned char *cmd = scp->cmnd;
int select_report = (int)cmd[2];
struct scsi_lun *one_lun;
unsigned char * max_addr;
alloc_len = cmd[9] + (cmd[8] << 8) + (cmd[7] << 16) + (cmd[6] << 24);
- if ((alloc_len < 4) || (select_report > 2)) {
- mk_sense_buffer(scp, ILLEGAL_REQUEST, INVALID_FIELD_IN_CDB,
- 0);
+ shortish = (alloc_len < 4);
+ if (shortish || (select_report > 2)) {
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, shortish ? 6 : 2, -1);
return check_condition_result;
}
/* can produce response with up to 16k luns (lun 0 to lun 16383) */
lun_cnt = 0;
else if (scsi_debug_no_lun_0 && (lun_cnt > 0))
--lun_cnt;
- wlun = (select_report > 0) ? 1 : 0;
- num = lun_cnt + wlun;
+ want_wlun = (select_report > 0) ? 1 : 0;
+ num = lun_cnt + want_wlun;
arr[2] = ((sizeof(struct scsi_lun) * num) >> 8) & 0xff;
arr[3] = (sizeof(struct scsi_lun) * num) & 0xff;
n = min((int)((SDEBUG_RLUN_ARR_SZ - 8) /
sizeof(struct scsi_lun)), num);
if (n < num) {
- wlun = 0;
+ want_wlun = 0;
lun_cnt = n;
}
one_lun = (struct scsi_lun *) &arr[8];
(upper | (SAM2_LUN_ADDRESS_METHOD << 6));
one_lun[i].scsi_lun[1] = lun & 0xff;
}
- if (wlun) {
+ if (want_wlun) {
one_lun[i].scsi_lun[0] = (SAM2_WLUN_REPORT_LUNS >> 8) & 0xff;
one_lun[i].scsi_lun[1] = SAM2_WLUN_REPORT_LUNS & 0xff;
i++;
/* better not to use temporary buffer. */
buf = kmalloc(scsi_bufflen(scp), GFP_ATOMIC);
if (!buf) {
- mk_sense_buffer(scp, NOT_READY,
- LOGICAL_UNIT_COMMUNICATION_FAILURE, 0);
+ mk_sense_buffer(scp, ILLEGAL_REQUEST, INSUFF_RES_ASC,
+ INSUFF_RES_ASCQ);
return check_condition_result;
}
return 0;
}
+static int
+resp_xdwriteread_10(struct scsi_cmnd *scp, struct sdebug_dev_info *devip)
+{
+ u8 *cmd = scp->cmnd;
+ u64 lba;
+ u32 num;
+ int errsts;
+
+ if (!scsi_bidi_cmnd(scp)) {
+ mk_sense_buffer(scp, ILLEGAL_REQUEST, INSUFF_RES_ASC,
+ INSUFF_RES_ASCQ);
+ return check_condition_result;
+ }
+ errsts = resp_read_dt0(scp, devip);
+ if (errsts)
+ return errsts;
+ if (!(cmd[1] & 0x4)) { /* DISABLE_WRITE is not set */
+ errsts = resp_write_dt0(scp, devip);
+ if (errsts)
+ return errsts;
+ }
+ lba = get_unaligned_be32(cmd + 2);
+ num = get_unaligned_be16(cmd + 7);
+ return resp_xdwriteread(scp, lba, num, devip);
+}
+
/* When timer or tasklet goes off this function is called. */
static void sdebug_q_cmd_complete(unsigned long indx)
{
open_devip->sdbg_host = sdbg_host;
atomic_set(&open_devip->num_in_q, 0);
set_bit(SDEBUG_UA_POR, open_devip->uas_bm);
- open_devip->used = 1;
- if (sdev->lun == SAM2_WLUN_REPORT_LUNS)
- open_devip->wlun = SAM2_WLUN_REPORT_LUNS & 0xff;
-
+ open_devip->used = true;
return open_devip;
}
if (NULL == devip)
return 1; /* no resources, will be marked offline */
sdp->hostdata = devip;
- sdp->tagged_supported = 1;
- if (sdp->host->cmd_per_lun)
- scsi_adjust_queue_depth(sdp, DEF_TAGGED_QUEUING,
- DEF_CMD_PER_LUN);
blk_queue_max_segment_size(sdp->request_queue, -1U);
if (scsi_debug_no_uld)
sdp->no_uld_attach = 1;
sdp->host->host_no, sdp->channel, sdp->id, sdp->lun);
if (devip) {
/* make this slot available for re-use */
- devip->used = 0;
+ devip->used = false;
sdp->hostdata = NULL;
}
}
module_param_named(removable, scsi_debug_removable, bool, S_IRUGO | S_IWUSR);
module_param_named(scsi_level, scsi_debug_scsi_level, int, S_IRUGO);
module_param_named(sector_size, scsi_debug_sector_size, int, S_IRUGO);
+module_param_named(strict, scsi_debug_strict, bool, S_IRUGO | S_IWUSR);
module_param_named(unmap_alignment, scsi_debug_unmap_alignment, int, S_IRUGO);
module_param_named(unmap_granularity, scsi_debug_unmap_granularity, int, S_IRUGO);
module_param_named(unmap_max_blocks, scsi_debug_unmap_max_blocks, int, S_IRUGO);
MODULE_PARM_DESC(ato, "application tag ownership: 0=disk 1=host (def=1)");
MODULE_PARM_DESC(clustering, "when set enables larger transfers (def=0)");
MODULE_PARM_DESC(delay, "response delay (def=1 jiffy); 0:imm, -1,-2:tiny");
-MODULE_PARM_DESC(dev_size_mb, "size in MB of ram shared by devs(def=8)");
+MODULE_PARM_DESC(dev_size_mb, "size in MiB of ram shared by devs(def=8)");
MODULE_PARM_DESC(dif, "data integrity field type: 0-3 (def=0)");
MODULE_PARM_DESC(dix, "data integrity extensions mask (def=0)");
MODULE_PARM_DESC(dsense, "use descriptor sense format(def=0 -> fixed)");
MODULE_PARM_DESC(removable, "claim to have removable media (def=0)");
MODULE_PARM_DESC(scsi_level, "SCSI level to simulate(def=6[SPC-4])");
MODULE_PARM_DESC(sector_size, "logical block size in bytes (def=512)");
+MODULE_PARM_DESC(strict, "stricter checks: reserved field in cdb (def=0)");
MODULE_PARM_DESC(unmap_alignment, "lowest aligned thin provisioning lba (def=0)");
MODULE_PARM_DESC(unmap_granularity, "thin provisioning granularity in blocks (def=1)");
MODULE_PARM_DESC(unmap_max_blocks, "max # of blocks can be unmapped in one cmd (def=0xffffffff)");
MODULE_PARM_DESC(unmap_max_desc, "max # of ranges that can be unmapped in one cmd (def=256)");
-MODULE_PARM_DESC(virtual_gb, "virtual gigabyte size (def=0 -> use dev_size_mb)");
+MODULE_PARM_DESC(virtual_gb, "virtual gigabyte (GiB) size (def=0 -> use dev_size_mb)");
MODULE_PARM_DESC(vpd_use_hostno, "0 -> dev ids ignore hostno (def=1 -> unique dev ids)");
MODULE_PARM_DESC(write_same_length, "Maximum blocks per WRITE SAME cmd (def=0xffff)");
return -EINVAL;
opts_done:
scsi_debug_opts = opts;
+ if (SCSI_DEBUG_OPT_RECOVERED_ERR & opts)
+ sdebug_any_injecting_opt = true;
+ else if (SCSI_DEBUG_OPT_TRANSPORT_ERR & opts)
+ sdebug_any_injecting_opt = true;
+ else if (SCSI_DEBUG_OPT_DIF_ERR & opts)
+ sdebug_any_injecting_opt = true;
+ else if (SCSI_DEBUG_OPT_DIX_ERR & opts)
+ sdebug_any_injecting_opt = true;
+ else if (SCSI_DEBUG_OPT_SHORT_TRANSFER & opts)
+ sdebug_any_injecting_opt = true;
atomic_set(&sdebug_cmnd_count, 0);
atomic_set(&sdebug_a_tsf, 0);
return count;
size_t count)
{
int n;
+ bool changed;
if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
+ changed = (scsi_debug_virtual_gb != n);
scsi_debug_virtual_gb = n;
-
sdebug_capacity = get_sdebug_capacity();
-
+ if (changed) {
+ struct sdebug_host_info *sdhp;
+ struct sdebug_dev_info *dp;
+
+ list_for_each_entry(sdhp, &sdebug_host_list,
+ host_list) {
+ list_for_each_entry(dp, &sdhp->dev_info_list,
+ dev_list) {
+ set_bit(SDEBUG_UA_CAPACITY_CHANGED,
+ dp->uas_bm);
+ }
+ }
+ }
return count;
}
return -EINVAL;
}
static DRIVER_ATTR_RW(host_lock);
+static ssize_t strict_show(struct device_driver *ddp, char *buf)
+{
+ return scnprintf(buf, PAGE_SIZE, "%d\n", !!scsi_debug_strict);
+}
+static ssize_t strict_store(struct device_driver *ddp, const char *buf,
+ size_t count)
+{
+ int n;
+
+ if ((count > 0) && (1 == sscanf(buf, "%d", &n)) && (n >= 0)) {
+ scsi_debug_strict = (n > 0);
+ return count;
+ }
+ return -EINVAL;
+}
+static DRIVER_ATTR_RW(strict);
+
/* Note: The following array creates attribute files in the
/sys/bus/pseudo/drivers/scsi_debug directory. The advantage of these
&driver_attr_removable.attr,
&driver_attr_host_lock.attr,
&driver_attr_ndelay.attr,
+ &driver_attr_strict.attr,
NULL,
};
ATTRIBUTE_GROUPS(sdebug_drv);
}
static int
-scsi_debug_queuecommand(struct scsi_cmnd *SCpnt)
-{
- unsigned char *cmd = SCpnt->cmnd;
- int len, k;
- unsigned int num;
- unsigned long long lba;
- u32 ei_lba;
- int errsts = 0;
- int target = SCpnt->device->id;
- struct sdebug_dev_info *devip = NULL;
- int inj_recovered = 0;
- int inj_transport = 0;
- int inj_dif = 0;
- int inj_dix = 0;
- int inj_short = 0;
- int delay_override = 0;
- int unmap = 0;
-
- scsi_set_resid(SCpnt, 0);
- if ((SCSI_DEBUG_OPT_NOISE & scsi_debug_opts) &&
- !(SCSI_DEBUG_OPT_NO_CDB_NOISE & scsi_debug_opts)) {
- char b[120];
- int n;
-
- len = SCpnt->cmd_len;
- if (len > 32)
- strcpy(b, "too long, over 32 bytes");
- else {
- for (k = 0, n = 0; k < len; ++k)
- n += scnprintf(b + n, sizeof(b) - n, "%02x ",
- (unsigned int)cmd[k]);
- }
- sdev_printk(KERN_INFO, SCpnt->device, "%s: cmd %s\n", my_name,
- b);
- }
-
- if ((SCpnt->device->lun >= scsi_debug_max_luns) &&
- (SCpnt->device->lun != SAM2_WLUN_REPORT_LUNS))
- return schedule_resp(SCpnt, NULL, DID_NO_CONNECT << 16, 0);
- devip = devInfoReg(SCpnt->device);
- if (NULL == devip)
- return schedule_resp(SCpnt, NULL, DID_NO_CONNECT << 16, 0);
-
- if ((scsi_debug_every_nth != 0) &&
- (atomic_inc_return(&sdebug_cmnd_count) >=
- abs(scsi_debug_every_nth))) {
- atomic_set(&sdebug_cmnd_count, 0);
- if (scsi_debug_every_nth < -1)
- scsi_debug_every_nth = -1;
- if (SCSI_DEBUG_OPT_TIMEOUT & scsi_debug_opts)
- return 0; /* ignore command causing timeout */
- else if (SCSI_DEBUG_OPT_MAC_TIMEOUT & scsi_debug_opts &&
- scsi_medium_access_command(SCpnt))
- return 0; /* time out reads and writes */
- else if (SCSI_DEBUG_OPT_RECOVERED_ERR & scsi_debug_opts)
- inj_recovered = 1; /* to reads and writes below */
- else if (SCSI_DEBUG_OPT_TRANSPORT_ERR & scsi_debug_opts)
- inj_transport = 1; /* to reads and writes below */
- else if (SCSI_DEBUG_OPT_DIF_ERR & scsi_debug_opts)
- inj_dif = 1; /* to reads and writes below */
- else if (SCSI_DEBUG_OPT_DIX_ERR & scsi_debug_opts)
- inj_dix = 1; /* to reads and writes below */
- else if (SCSI_DEBUG_OPT_SHORT_TRANSFER & scsi_debug_opts)
- inj_short = 1;
- }
-
- if (devip->wlun) {
- switch (*cmd) {
- case INQUIRY:
- case REQUEST_SENSE:
- case TEST_UNIT_READY:
- case REPORT_LUNS:
- break; /* only allowable wlun commands */
- default:
- if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
- printk(KERN_INFO "scsi_debug: Opcode: 0x%x "
- "not supported for wlun\n", *cmd);
- mk_sense_buffer(SCpnt, ILLEGAL_REQUEST,
- INVALID_OPCODE, 0);
- errsts = check_condition_result;
- return schedule_resp(SCpnt, devip, errsts, 0);
- }
- }
-
- switch (*cmd) {
- case INQUIRY: /* mandatory, ignore unit attention */
- delay_override = 1;
- errsts = resp_inquiry(SCpnt, target, devip);
- break;
- case REQUEST_SENSE: /* mandatory, ignore unit attention */
- delay_override = 1;
- errsts = resp_requests(SCpnt, devip);
- break;
- case REZERO_UNIT: /* actually this is REWIND for SSC */
- case START_STOP:
- errsts = resp_start_stop(SCpnt, devip);
- break;
- case ALLOW_MEDIUM_REMOVAL:
- errsts = check_readiness(SCpnt, UAS_ONLY, devip);
- if (errsts)
- break;
- if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
- printk(KERN_INFO "scsi_debug: Medium removal %s\n",
- cmd[4] ? "inhibited" : "enabled");
- break;
- case SEND_DIAGNOSTIC: /* mandatory */
- errsts = check_readiness(SCpnt, UAS_ONLY, devip);
- break;
- case TEST_UNIT_READY: /* mandatory */
- /* delay_override = 1; */
- errsts = check_readiness(SCpnt, UAS_TUR, devip);
- break;
- case RESERVE:
- errsts = check_readiness(SCpnt, UAS_ONLY, devip);
- break;
- case RESERVE_10:
- errsts = check_readiness(SCpnt, UAS_ONLY, devip);
- break;
- case RELEASE:
- errsts = check_readiness(SCpnt, UAS_ONLY, devip);
- break;
- case RELEASE_10:
- errsts = check_readiness(SCpnt, UAS_ONLY, devip);
- break;
- case READ_CAPACITY:
- errsts = resp_readcap(SCpnt, devip);
- break;
- case SERVICE_ACTION_IN:
- if (cmd[1] == SAI_READ_CAPACITY_16)
- errsts = resp_readcap16(SCpnt, devip);
- else if (cmd[1] == SAI_GET_LBA_STATUS) {
-
- if (scsi_debug_lbp() == 0) {
- mk_sense_buffer(SCpnt, ILLEGAL_REQUEST,
- INVALID_COMMAND_OPCODE, 0);
- errsts = check_condition_result;
- } else
- errsts = resp_get_lba_status(SCpnt, devip);
- } else {
- mk_sense_buffer(SCpnt, ILLEGAL_REQUEST,
- INVALID_OPCODE, 0);
- errsts = check_condition_result;
- }
- break;
- case MAINTENANCE_IN:
- if (MI_REPORT_TARGET_PGS != cmd[1]) {
- mk_sense_buffer(SCpnt, ILLEGAL_REQUEST,
- INVALID_OPCODE, 0);
- errsts = check_condition_result;
- break;
- }
- errsts = resp_report_tgtpgs(SCpnt, devip);
- break;
- case READ_16:
- case READ_12:
- case READ_10:
- /* READ{10,12,16} and DIF Type 2 are natural enemies */
- if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
- cmd[1] & 0xe0) {
- mk_sense_buffer(SCpnt, ILLEGAL_REQUEST,
- INVALID_COMMAND_OPCODE, 0);
- errsts = check_condition_result;
- break;
- }
-
- if ((scsi_debug_dif == SD_DIF_TYPE1_PROTECTION ||
- scsi_debug_dif == SD_DIF_TYPE3_PROTECTION) &&
- (cmd[1] & 0xe0) == 0)
- printk(KERN_ERR "Unprotected RD/WR to DIF device\n");
-
- /* fall through */
- case READ_6:
-read:
- errsts = check_readiness(SCpnt, UAS_TUR, devip);
- if (errsts)
- break;
- if (scsi_debug_fake_rw)
- break;
- get_data_transfer_info(cmd, &lba, &num, &ei_lba);
-
- if (inj_short)
- num /= 2;
-
- errsts = resp_read(SCpnt, lba, num, ei_lba);
- if (inj_recovered && (0 == errsts)) {
- mk_sense_buffer(SCpnt, RECOVERED_ERROR,
- THRESHOLD_EXCEEDED, 0);
- errsts = check_condition_result;
- } else if (inj_transport && (0 == errsts)) {
- mk_sense_buffer(SCpnt, ABORTED_COMMAND,
- TRANSPORT_PROBLEM, ACK_NAK_TO);
- errsts = check_condition_result;
- } else if (inj_dif && (0 == errsts)) {
- /* Logical block guard check failed */
- mk_sense_buffer(SCpnt, ABORTED_COMMAND, 0x10, 1);
- errsts = illegal_condition_result;
- } else if (inj_dix && (0 == errsts)) {
- mk_sense_buffer(SCpnt, ILLEGAL_REQUEST, 0x10, 1);
- errsts = illegal_condition_result;
- }
- break;
- case REPORT_LUNS: /* mandatory, ignore unit attention */
- delay_override = 1;
- errsts = resp_report_luns(SCpnt, devip);
- break;
- case VERIFY: /* 10 byte SBC-2 command */
- errsts = check_readiness(SCpnt, UAS_TUR, devip);
- break;
- case WRITE_16:
- case WRITE_12:
- case WRITE_10:
- /* WRITE{10,12,16} and DIF Type 2 are natural enemies */
- if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION &&
- cmd[1] & 0xe0) {
- mk_sense_buffer(SCpnt, ILLEGAL_REQUEST,
- INVALID_COMMAND_OPCODE, 0);
- errsts = check_condition_result;
- break;
- }
-
- if ((scsi_debug_dif == SD_DIF_TYPE1_PROTECTION ||
- scsi_debug_dif == SD_DIF_TYPE3_PROTECTION) &&
- (cmd[1] & 0xe0) == 0)
- printk(KERN_ERR "Unprotected RD/WR to DIF device\n");
-
- /* fall through */
- case WRITE_6:
-write:
- errsts = check_readiness(SCpnt, UAS_TUR, devip);
- if (errsts)
- break;
- if (scsi_debug_fake_rw)
- break;
- get_data_transfer_info(cmd, &lba, &num, &ei_lba);
- errsts = resp_write(SCpnt, lba, num, ei_lba);
- if (inj_recovered && (0 == errsts)) {
- mk_sense_buffer(SCpnt, RECOVERED_ERROR,
- THRESHOLD_EXCEEDED, 0);
- errsts = check_condition_result;
- } else if (inj_dif && (0 == errsts)) {
- mk_sense_buffer(SCpnt, ABORTED_COMMAND, 0x10, 1);
- errsts = illegal_condition_result;
- } else if (inj_dix && (0 == errsts)) {
- mk_sense_buffer(SCpnt, ILLEGAL_REQUEST, 0x10, 1);
- errsts = illegal_condition_result;
- }
- break;
- case WRITE_SAME_16:
- case WRITE_SAME:
- if (cmd[1] & 0x8) {
- if ((*cmd == WRITE_SAME_16 && scsi_debug_lbpws == 0) ||
- (*cmd == WRITE_SAME && scsi_debug_lbpws10 == 0)) {
- mk_sense_buffer(SCpnt, ILLEGAL_REQUEST,
- INVALID_FIELD_IN_CDB, 0);
- errsts = check_condition_result;
- } else
- unmap = 1;
- }
- if (errsts)
- break;
- errsts = check_readiness(SCpnt, UAS_TUR, devip);
- if (errsts)
- break;
- if (scsi_debug_fake_rw)
- break;
- get_data_transfer_info(cmd, &lba, &num, &ei_lba);
- errsts = resp_write_same(SCpnt, lba, num, ei_lba, unmap);
- break;
- case UNMAP:
- errsts = check_readiness(SCpnt, UAS_TUR, devip);
- if (errsts)
- break;
- if (scsi_debug_fake_rw)
- break;
-
- if (scsi_debug_unmap_max_desc == 0 || scsi_debug_lbpu == 0) {
- mk_sense_buffer(SCpnt, ILLEGAL_REQUEST,
- INVALID_COMMAND_OPCODE, 0);
- errsts = check_condition_result;
- } else
- errsts = resp_unmap(SCpnt, devip);
- break;
- case MODE_SENSE:
- case MODE_SENSE_10:
- errsts = resp_mode_sense(SCpnt, target, devip);
- break;
- case MODE_SELECT:
- errsts = resp_mode_select(SCpnt, 1, devip);
- break;
- case MODE_SELECT_10:
- errsts = resp_mode_select(SCpnt, 0, devip);
- break;
- case LOG_SENSE:
- errsts = resp_log_sense(SCpnt, devip);
- break;
- case SYNCHRONIZE_CACHE:
- delay_override = 1;
- errsts = check_readiness(SCpnt, UAS_TUR, devip);
- break;
- case WRITE_BUFFER:
- errsts = check_readiness(SCpnt, UAS_ONLY, devip);
- break;
- case XDWRITEREAD_10:
- if (!scsi_bidi_cmnd(SCpnt)) {
- mk_sense_buffer(SCpnt, ILLEGAL_REQUEST,
- INVALID_FIELD_IN_CDB, 0);
- errsts = check_condition_result;
- break;
- }
-
- errsts = check_readiness(SCpnt, UAS_TUR, devip);
- if (errsts)
- break;
- if (scsi_debug_fake_rw)
- break;
- get_data_transfer_info(cmd, &lba, &num, &ei_lba);
- errsts = resp_read(SCpnt, lba, num, ei_lba);
- if (errsts)
- break;
- errsts = resp_write(SCpnt, lba, num, ei_lba);
- if (errsts)
- break;
- errsts = resp_xdwriteread(SCpnt, lba, num, devip);
- break;
- case VARIABLE_LENGTH_CMD:
- if (scsi_debug_dif == SD_DIF_TYPE2_PROTECTION) {
-
- if ((cmd[10] & 0xe0) == 0)
- printk(KERN_ERR
- "Unprotected RD/WR to DIF device\n");
-
- if (cmd[9] == READ_32) {
- BUG_ON(SCpnt->cmd_len < 32);
- goto read;
- }
-
- if (cmd[9] == WRITE_32) {
- BUG_ON(SCpnt->cmd_len < 32);
- goto write;
- }
- }
-
- mk_sense_buffer(SCpnt, ILLEGAL_REQUEST,
- INVALID_FIELD_IN_CDB, 0);
- errsts = check_condition_result;
- break;
- case 0x85:
- if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
- sdev_printk(KERN_INFO, SCpnt->device,
- "%s: ATA PASS-THROUGH(16) not supported\n", my_name);
- mk_sense_buffer(SCpnt, ILLEGAL_REQUEST,
- INVALID_OPCODE, 0);
- errsts = check_condition_result;
- break;
- default:
- if (SCSI_DEBUG_OPT_NOISE & scsi_debug_opts)
- sdev_printk(KERN_INFO, SCpnt->device,
- "%s: Opcode: 0x%x not supported\n",
- my_name, *cmd);
- errsts = check_readiness(SCpnt, UAS_ONLY, devip);
- if (errsts)
- break; /* Unit attention takes precedence */
- mk_sense_buffer(SCpnt, ILLEGAL_REQUEST, INVALID_OPCODE, 0);
- errsts = check_condition_result;
- break;
- }
- return schedule_resp(SCpnt, devip, errsts,
- (delay_override ? 0 : scsi_debug_delay));
-}
-
-static int
-sdebug_queuecommand_lock_or_not(struct Scsi_Host *shost, struct scsi_cmnd *cmd)
-{
- if (scsi_debug_host_lock) {
- unsigned long iflags;
- int rc;
-
- spin_lock_irqsave(shost->host_lock, iflags);
- rc = scsi_debug_queuecommand(cmd);
- spin_unlock_irqrestore(shost->host_lock, iflags);
- return rc;
- } else
- return scsi_debug_queuecommand(cmd);
-}
-
-static int
-sdebug_change_qdepth(struct scsi_device *sdev, int qdepth, int reason)
+sdebug_change_qdepth(struct scsi_device *sdev, int qdepth)
{
int num_in_q = 0;
- int bad = 0;
unsigned long iflags;
struct sdebug_dev_info *devip;
}
num_in_q = atomic_read(&devip->num_in_q);
spin_unlock_irqrestore(&queued_arr_lock, iflags);
- if (reason == SCSI_QDEPTH_DEFAULT || reason == SCSI_QDEPTH_RAMP_UP) {
- if (qdepth < 1)
- qdepth = 1;
- /* allow to exceed max host queued_arr elements for testing */
- if (qdepth > SCSI_DEBUG_CANQUEUE + 10)
- qdepth = SCSI_DEBUG_CANQUEUE + 10;
- scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
- } else if (reason == SCSI_QDEPTH_QFULL)
- scsi_track_queue_full(sdev, qdepth);
- else
- bad = 1;
- if (bad)
- sdev_printk(KERN_WARNING, sdev,
- "%s: unknown reason=0x%x\n", __func__, reason);
+
+ if (qdepth < 1)
+ qdepth = 1;
+ /* allow to exceed max host queued_arr elements for testing */
+ if (qdepth > SCSI_DEBUG_CANQUEUE + 10)
+ qdepth = SCSI_DEBUG_CANQUEUE + 10;
+ scsi_change_queue_depth(sdev, qdepth);
+
if (SCSI_DEBUG_OPT_Q_NOISE & scsi_debug_opts) {
- if (SCSI_QDEPTH_QFULL == reason)
- sdev_printk(KERN_INFO, sdev,
- "%s: -> %d, num_in_q=%d, reason: queue full\n",
- __func__, qdepth, num_in_q);
- else {
- const char *cp;
-
- switch (reason) {
- case SCSI_QDEPTH_DEFAULT:
- cp = "default (sysfs ?)";
- break;
- case SCSI_QDEPTH_RAMP_UP:
- cp = "ramp up";
- break;
- default:
- cp = "unknown";
- break;
- }
- sdev_printk(KERN_INFO, sdev,
- "%s: qdepth=%d, num_in_q=%d, reason: %s\n",
- __func__, qdepth, num_in_q, cp);
- }
+ sdev_printk(KERN_INFO, sdev,
+ "%s: qdepth=%d, num_in_q=%d\n",
+ __func__, qdepth, num_in_q);
}
return sdev->queue_depth;
}
static int
sdebug_change_qtype(struct scsi_device *sdev, int qtype)
{
- if (sdev->tagged_supported) {
- scsi_set_tag_type(sdev, qtype);
- if (qtype)
- scsi_activate_tcq(sdev, sdev->queue_depth);
- else
- scsi_deactivate_tcq(sdev, sdev->queue_depth);
- } else
- qtype = 0;
+ qtype = scsi_change_queue_type(sdev, qtype);
if (SCSI_DEBUG_OPT_Q_NOISE & scsi_debug_opts) {
const char *cp;
return qtype;
}
+static int
+check_inject(struct scsi_cmnd *scp)
+{
+ struct sdebug_scmd_extra_t *ep = scsi_cmd_priv(scp);
+
+ memset(ep, 0, sizeof(struct sdebug_scmd_extra_t));
+
+ if (atomic_inc_return(&sdebug_cmnd_count) >=
+ abs(scsi_debug_every_nth)) {
+ atomic_set(&sdebug_cmnd_count, 0);
+ if (scsi_debug_every_nth < -1)
+ scsi_debug_every_nth = -1;
+ if (SCSI_DEBUG_OPT_TIMEOUT & scsi_debug_opts)
+ return 1; /* ignore command causing timeout */
+ else if (SCSI_DEBUG_OPT_MAC_TIMEOUT & scsi_debug_opts &&
+ scsi_medium_access_command(scp))
+ return 1; /* time out reads and writes */
+ if (sdebug_any_injecting_opt) {
+ int opts = scsi_debug_opts;
+
+ if (SCSI_DEBUG_OPT_RECOVERED_ERR & opts)
+ ep->inj_recovered = true;
+ else if (SCSI_DEBUG_OPT_TRANSPORT_ERR & opts)
+ ep->inj_transport = true;
+ else if (SCSI_DEBUG_OPT_DIF_ERR & opts)
+ ep->inj_dif = true;
+ else if (SCSI_DEBUG_OPT_DIX_ERR & opts)
+ ep->inj_dix = true;
+ else if (SCSI_DEBUG_OPT_SHORT_TRANSFER & opts)
+ ep->inj_short = true;
+ }
+ }
+ return 0;
+}
+
+static int
+scsi_debug_queuecommand(struct scsi_cmnd *scp)
+{
+ u8 sdeb_i;
+ struct scsi_device *sdp = scp->device;
+ const struct opcode_info_t *oip;
+ const struct opcode_info_t *r_oip;
+ struct sdebug_dev_info *devip;
+ u8 *cmd = scp->cmnd;
+ int (*r_pfp)(struct scsi_cmnd *, struct sdebug_dev_info *);
+ int k, na;
+ int errsts = 0;
+ int errsts_no_connect = DID_NO_CONNECT << 16;
+ u32 flags;
+ u16 sa;
+ u8 opcode = cmd[0];
+ bool has_wlun_rl;
+ bool debug = !!(SCSI_DEBUG_OPT_NOISE & scsi_debug_opts);
+
+ scsi_set_resid(scp, 0);
+ if (debug && !(SCSI_DEBUG_OPT_NO_CDB_NOISE & scsi_debug_opts)) {
+ char b[120];
+ int n, len, sb;
+
+ len = scp->cmd_len;
+ sb = (int)sizeof(b);
+ if (len > 32)
+ strcpy(b, "too long, over 32 bytes");
+ else {
+ for (k = 0, n = 0; k < len && n < sb; ++k)
+ n += scnprintf(b + n, sb - n, "%02x ",
+ (u32)cmd[k]);
+ }
+ sdev_printk(KERN_INFO, sdp, "%s: cmd %s\n", my_name, b);
+ }
+ has_wlun_rl = (sdp->lun == SAM2_WLUN_REPORT_LUNS);
+ if ((sdp->lun >= scsi_debug_max_luns) && !has_wlun_rl)
+ return schedule_resp(scp, NULL, errsts_no_connect, 0);
+
+ sdeb_i = opcode_ind_arr[opcode]; /* fully mapped */
+ oip = &opcode_info_arr[sdeb_i]; /* safe if table consistent */
+ devip = (struct sdebug_dev_info *)sdp->hostdata;
+ if (!devip) {
+ devip = devInfoReg(sdp);
+ if (NULL == devip)
+ return schedule_resp(scp, NULL, errsts_no_connect, 0);
+ }
+ na = oip->num_attached;
+ r_pfp = oip->pfp;
+ if (na) { /* multiple commands with this opcode */
+ r_oip = oip;
+ if (FF_SA & r_oip->flags) {
+ if (F_SA_LOW & oip->flags)
+ sa = 0x1f & cmd[1];
+ else
+ sa = get_unaligned_be16(cmd + 8);
+ for (k = 0; k <= na; oip = r_oip->arrp + k++) {
+ if (opcode == oip->opcode && sa == oip->sa)
+ break;
+ }
+ } else { /* since no service action only check opcode */
+ for (k = 0; k <= na; oip = r_oip->arrp + k++) {
+ if (opcode == oip->opcode)
+ break;
+ }
+ }
+ if (k > na) {
+ if (F_SA_LOW & r_oip->flags)
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, 1, 4);
+ else if (F_SA_HIGH & r_oip->flags)
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, 8, 7);
+ else
+ mk_sense_invalid_opcode(scp);
+ goto check_cond;
+ }
+ } /* else (when na==0) we assume the oip is a match */
+ flags = oip->flags;
+ if (F_INV_OP & flags) {
+ mk_sense_invalid_opcode(scp);
+ goto check_cond;
+ }
+ if (has_wlun_rl && !(F_RL_WLUN_OK & flags)) {
+ if (debug)
+ sdev_printk(KERN_INFO, sdp, "scsi_debug: Opcode: "
+ "0x%x not supported for wlun\n", opcode);
+ mk_sense_invalid_opcode(scp);
+ goto check_cond;
+ }
+ if (scsi_debug_strict) { /* check cdb against mask */
+ u8 rem;
+ int j;
+
+ for (k = 1; k < oip->len_mask[0] && k < 16; ++k) {
+ rem = ~oip->len_mask[k] & cmd[k];
+ if (rem) {
+ for (j = 7; j >= 0; --j, rem <<= 1) {
+ if (0x80 & rem)
+ break;
+ }
+ mk_sense_invalid_fld(scp, SDEB_IN_CDB, k, j);
+ goto check_cond;
+ }
+ }
+ }
+ if (!(F_SKIP_UA & flags) &&
+ SDEBUG_NUM_UAS != find_first_bit(devip->uas_bm, SDEBUG_NUM_UAS)) {
+ errsts = check_readiness(scp, UAS_ONLY, devip);
+ if (errsts)
+ goto check_cond;
+ }
+ if ((F_M_ACCESS & flags) && devip->stopped) {
+ mk_sense_buffer(scp, NOT_READY, LOGICAL_UNIT_NOT_READY, 0x2);
+ if (debug)
+ sdev_printk(KERN_INFO, sdp, "%s reports: Not ready: "
+ "%s\n", my_name, "initializing command "
+ "required");
+ errsts = check_condition_result;
+ goto fini;
+ }
+ if (scsi_debug_fake_rw && (F_FAKE_RW & flags))
+ goto fini;
+ if (scsi_debug_every_nth) {
+ if (check_inject(scp))
+ return 0; /* ignore command: make trouble */
+ }
+ if (oip->pfp) /* if this command has a resp_* function, call it */
+ errsts = oip->pfp(scp, devip);
+ else if (r_pfp) /* if leaf function ptr NULL, try the root's */
+ errsts = r_pfp(scp, devip);
+
+fini:
+ return schedule_resp(scp, devip, errsts,
+ ((F_DELAY_OVERR & flags) ? 0 : scsi_debug_delay));
+check_cond:
+ return schedule_resp(scp, devip, check_condition_result, 0);
+}
+
+static int
+sdebug_queuecommand_lock_or_not(struct Scsi_Host *shost, struct scsi_cmnd *cmd)
+{
+ if (scsi_debug_host_lock) {
+ unsigned long iflags;
+ int rc;
+
+ spin_lock_irqsave(shost->host_lock, iflags);
+ rc = scsi_debug_queuecommand(cmd);
+ spin_unlock_irqrestore(shost->host_lock, iflags);
+ return rc;
+ } else
+ return scsi_debug_queuecommand(cmd);
+}
+
static struct scsi_host_template sdebug_driver_template = {
.show_info = scsi_debug_show_info,
.write_info = scsi_debug_write_info,
.max_sectors = -1U,
.use_clustering = DISABLE_CLUSTERING,
.module = THIS_MODULE,
+ .track_queue_depth = 1,
+ .cmd_size = sizeof(struct sdebug_scmd_extra_t),
};
static int sdebug_driver_probe(struct device * dev)
{
- int error = 0;
- struct sdebug_host_info *sdbg_host;
- struct Scsi_Host *hpnt;
+ int error = 0;
+ int opts;
+ struct sdebug_host_info *sdbg_host;
+ struct Scsi_Host *hpnt;
int host_prot;
sdbg_host = to_sdebug_host(dev);
sdebug_driver_template.use_clustering = ENABLE_CLUSTERING;
hpnt = scsi_host_alloc(&sdebug_driver_template, sizeof(sdbg_host));
if (NULL == hpnt) {
- printk(KERN_ERR "%s: scsi_register failed\n", __func__);
+ pr_err("%s: scsi_host_alloc failed\n", __func__);
error = -ENODEV;
return error;
}
else
scsi_host_set_guard(hpnt, SHOST_DIX_GUARD_CRC);
+ opts = scsi_debug_opts;
+ if (SCSI_DEBUG_OPT_RECOVERED_ERR & opts)
+ sdebug_any_injecting_opt = true;
+ else if (SCSI_DEBUG_OPT_TRANSPORT_ERR & opts)
+ sdebug_any_injecting_opt = true;
+ else if (SCSI_DEBUG_OPT_DIF_ERR & opts)
+ sdebug_any_injecting_opt = true;
+ else if (SCSI_DEBUG_OPT_DIX_ERR & opts)
+ sdebug_any_injecting_opt = true;
+ else if (SCSI_DEBUG_OPT_SHORT_TRANSFER & opts)
+ sdebug_any_injecting_opt = true;
+
error = scsi_add_host(hpnt, &sdbg_host->dev);
if (error) {
printk(KERN_ERR "%s: scsi_add_host failed\n", __func__);
{"IOMEGA", "Io20S *F", NULL, BLIST_KEY},
{"INSITE", "Floptical F*8I", NULL, BLIST_KEY},
{"INSITE", "I325VM", NULL, BLIST_KEY},
+ {"Intel", "Multi-Flex", NULL, BLIST_NO_RSOC},
{"iRiver", "iFP Mass Driver", NULL, BLIST_NOT_LOCKABLE | BLIST_INQUIRY_36},
{"LASOUND", "CDX7405", "3.10", BLIST_MAX5LUN | BLIST_SINGLELUN},
{"MATSHITA", "PD-1", NULL, BLIST_FORCELUN | BLIST_SINGLELUN},
#include <scsi/scsi_transport.h>
#include <scsi/scsi_host.h>
#include <scsi/scsi_ioctl.h>
+#include <scsi/sg.h>
#include "scsi_priv.h"
#include "scsi_logging.h"
} else {
SCSI_LOG_ERROR_RECOVERY(3,
scmd_printk(KERN_INFO, scmd,
- "scmd %p abort failed, rtn %d\n",
- scmd, rtn));
+ "scmd %p abort %s\n", scmd,
+ (rtn == FAST_IO_FAIL) ?
+ "not send" : "failed"));
}
}
if (cmd_cancel || cmd_failed) {
SCSI_LOG_ERROR_RECOVERY(3,
- sdev_printk(KERN_INFO, sdev,
+ shost_printk(KERN_INFO, shost,
"%s: cmds failed: %d, cancel: %d\n",
__func__, cmd_failed,
cmd_cancel));
if (! scsi_command_normalize_sense(scmd, &sshdr))
return FAILED; /* no valid sense data */
- if (scmd->cmnd[0] == TEST_UNIT_READY && scmd->scsi_done != scsi_eh_done)
- /*
- * nasty: for mid-layer issued TURs, we need to return the
- * actual sense data without any recovery attempt. For eh
- * issued ones, we need to try to recover and interpret
- */
- return SUCCESS;
-
scsi_report_sense(sdev, &sshdr);
if (scsi_sense_is_deferred(&sshdr))
/* handler does not care. Drop down to default handling */
}
+ if (scmd->cmnd[0] == TEST_UNIT_READY && scmd->scsi_done != scsi_eh_done)
+ /*
+ * nasty: for mid-layer issued TURs, we need to return the
+ * actual sense data without any recovery attempt. For eh
+ * issued ones, we need to try to recover and interpret
+ */
+ return SUCCESS;
+
/*
* Previous logic looked for FILEMARK, EOM or ILI which are
* mainly associated with tapes and returned SUCCESS.
struct scsi_host_template *sht = sdev->host->hostt;
struct scsi_device *tmp_sdev;
- if (!sht->change_queue_depth ||
+ if (!sht->track_queue_depth ||
sdev->queue_depth >= sdev->max_queue_depth)
return;
tmp_sdev->id != sdev->id ||
tmp_sdev->queue_depth == sdev->max_queue_depth)
continue;
- /*
- * call back into LLD to increase queue_depth by one
- * with ramp up reason code.
- */
- sht->change_queue_depth(tmp_sdev, tmp_sdev->queue_depth + 1,
- SCSI_QDEPTH_RAMP_UP);
+
+ scsi_change_queue_depth(tmp_sdev, tmp_sdev->queue_depth + 1);
sdev->last_queue_ramp_up = jiffies;
}
}
struct scsi_host_template *sht = sdev->host->hostt;
struct scsi_device *tmp_sdev;
- if (!sht->change_queue_depth)
+ if (!sht->track_queue_depth)
return;
shost_for_each_device(tmp_sdev, sdev->host) {
* the device when we got the queue full so we start
* from the highest possible value and work our way down.
*/
- sht->change_queue_depth(tmp_sdev, tmp_sdev->queue_depth - 1,
- SCSI_QDEPTH_QFULL);
+ scsi_track_queue_full(tmp_sdev, tmp_sdev->queue_depth - 1);
}
}
return rtn;
}
-static int scsi_try_to_abort_cmd(struct scsi_host_template *hostt, struct scsi_cmnd *scmd)
+/**
+ * scsi_try_to_abort_cmd - Ask host to abort a SCSI command
+ * @scmd: SCSI cmd used to send a target reset
+ *
+ * Return value:
+ * SUCCESS, FAILED, or FAST_IO_FAIL
+ *
+ * Notes:
+ * SUCCESS does not necessarily indicate that the command
+ * has been aborted; it only indicates that the LLDDs
+ * has cleared all references to that command.
+ * LLDDs should return FAILED only if an abort was required
+ * but could not be executed. LLDDs should return FAST_IO_FAIL
+ * if the device is temporarily unavailable (eg due to a
+ * link down on FibreChannel)
+ */
+static int scsi_try_to_abort_cmd(struct scsi_host_template *hostt,
+ struct scsi_cmnd *scmd)
{
if (!hostt->eh_abort_handler)
return FAILED;
shost = scmd->device->host;
if (scsi_host_eh_past_deadline(shost)) {
SCSI_LOG_ERROR_RECOVERY(3,
- shost_printk(KERN_INFO, shost,
- "skip %s, past eh deadline\n",
- __func__));
+ scmd_printk(KERN_INFO, scmd,
+ "%s: skip request sense, past eh deadline\n",
+ current->comm));
break;
}
if (status_byte(scmd->result) != CHECK_CONDITION)
SCSI_LOG_ERROR_RECOVERY(3, scmd_printk(KERN_INFO, scmd,
"sense requested for %p result %x\n",
scmd, scmd->result));
- SCSI_LOG_ERROR_RECOVERY(3, scsi_print_sense("bh", scmd));
+ SCSI_LOG_ERROR_RECOVERY(3, scsi_print_sense(scmd));
rtn = scsi_decide_disposition(scmd);
/* Push items back onto work_q */
list_splice_init(cmd_list, work_q);
SCSI_LOG_ERROR_RECOVERY(3,
- shost_printk(KERN_INFO, sdev->host,
- "skip %s, past eh deadline",
- __func__));
+ sdev_printk(KERN_INFO, sdev,
+ "%s: skip test device, past eh deadline",
+ current->comm));
break;
}
}
if (scsi_host_eh_past_deadline(shost)) {
list_splice_init(&check_list, work_q);
SCSI_LOG_ERROR_RECOVERY(3,
- shost_printk(KERN_INFO, shost,
- "skip %s, past eh deadline\n",
- __func__));
+ scmd_printk(KERN_INFO, scmd,
+ "%s: skip aborting cmd, past eh deadline\n",
+ current->comm));
return list_empty(work_q);
}
SCSI_LOG_ERROR_RECOVERY(3,
- shost_printk(KERN_INFO, shost,
- "%s: aborting cmd: 0x%p\n",
- current->comm, scmd));
+ scmd_printk(KERN_INFO, scmd,
+ "%s: aborting cmd\n", current->comm));
rtn = scsi_try_to_abort_cmd(shost->hostt, scmd);
if (rtn == FAILED) {
SCSI_LOG_ERROR_RECOVERY(3,
- shost_printk(KERN_INFO, shost,
- "%s: aborting cmd failed: 0x%p\n",
- current->comm, scmd));
+ scmd_printk(KERN_INFO, scmd,
+ "%s: aborting cmd failed\n",
+ current->comm));
list_splice_init(&check_list, work_q);
return list_empty(work_q);
}
shost_for_each_device(sdev, shost) {
if (scsi_host_eh_past_deadline(shost)) {
SCSI_LOG_ERROR_RECOVERY(3,
- shost_printk(KERN_INFO, shost,
- "skip %s, past eh deadline\n",
- __func__));
+ sdev_printk(KERN_INFO, sdev,
+ "%s: skip START_UNIT, past eh deadline\n",
+ current->comm));
break;
}
stu_scmd = NULL;
continue;
SCSI_LOG_ERROR_RECOVERY(3,
- shost_printk(KERN_INFO, shost,
- "%s: Sending START_UNIT to sdev: 0x%p\n",
- current->comm, sdev));
+ sdev_printk(KERN_INFO, sdev,
+ "%s: Sending START_UNIT\n",
+ current->comm));
if (!scsi_eh_try_stu(stu_scmd)) {
if (!scsi_device_online(sdev) ||
}
} else {
SCSI_LOG_ERROR_RECOVERY(3,
- shost_printk(KERN_INFO, shost,
- "%s: START_UNIT failed to sdev:"
- " 0x%p\n", current->comm, sdev));
+ sdev_printk(KERN_INFO, sdev,
+ "%s: START_UNIT failed\n",
+ current->comm));
}
}
shost_for_each_device(sdev, shost) {
if (scsi_host_eh_past_deadline(shost)) {
SCSI_LOG_ERROR_RECOVERY(3,
- shost_printk(KERN_INFO, shost,
- "skip %s, past eh deadline\n",
- __func__));
+ sdev_printk(KERN_INFO, sdev,
+ "%s: skip BDR, past eh deadline\n",
+ current->comm));
break;
}
bdr_scmd = NULL;
continue;
SCSI_LOG_ERROR_RECOVERY(3,
- shost_printk(KERN_INFO, shost,
- "%s: Sending BDR sdev: 0x%p\n",
- current->comm, sdev));
+ sdev_printk(KERN_INFO, sdev,
+ "%s: Sending BDR\n", current->comm));
rtn = scsi_try_bus_device_reset(bdr_scmd);
if (rtn == SUCCESS || rtn == FAST_IO_FAIL) {
if (!scsi_device_online(sdev) ||
}
} else {
SCSI_LOG_ERROR_RECOVERY(3,
- shost_printk(KERN_INFO, shost,
- "%s: BDR failed sdev: 0x%p\n",
- current->comm, sdev));
+ sdev_printk(KERN_INFO, sdev,
+ "%s: BDR failed\n", current->comm));
}
}
list_splice_init(&tmp_list, work_q);
SCSI_LOG_ERROR_RECOVERY(3,
shost_printk(KERN_INFO, shost,
- "skip %s, past eh deadline\n",
- __func__));
+ "%s: Skip target reset, past eh deadline\n",
+ current->comm));
return list_empty(work_q);
}
list_splice_init(&check_list, work_q);
SCSI_LOG_ERROR_RECOVERY(3,
shost_printk(KERN_INFO, shost,
- "skip %s, past eh deadline\n",
- __func__));
+ "%s: skip BRST, past eh deadline\n",
+ current->comm));
return list_empty(work_q);
}
* is no point trying to lock the door of an off-line device.
*/
shost_for_each_device(sdev, shost) {
- if (scsi_device_online(sdev) && sdev->locked)
+ if (scsi_device_online(sdev) && sdev->was_reset && sdev->locked) {
scsi_eh_lock_door(sdev);
+ sdev->was_reset = 0;
+ }
}
/*
*/
if (!shost->eh_noresume && scsi_autopm_get_host(shost) != 0) {
SCSI_LOG_ERROR_RECOVERY(1,
- printk(KERN_ERR "Error handler scsi_eh_%d "
- "unable to autoresume\n",
- shost->host_no));
+ shost_printk(KERN_ERR, shost,
+ "scsi_eh_%d: unable to autoresume\n",
+ shost->host_no));
continue;
}
{
}
-/*
- * Function: scsi_reset_provider
- *
- * Purpose: Send requested reset to a bus or device at any phase.
- *
- * Arguments: device - device to send reset to
- * flag - reset type (see scsi.h)
- *
- * Returns: SUCCESS/FAILURE.
- *
- * Notes: This is used by the SCSI Generic driver to provide
- * Bus/Device reset capability.
+/**
+ * scsi_ioctl_reset: explicitly reset a host/bus/target/device
+ * @dev: scsi_device to operate on
+ * @arg: reset type (see sg.h)
*/
int
-scsi_reset_provider(struct scsi_device *dev, int flag)
+scsi_ioctl_reset(struct scsi_device *dev, int __user *arg)
{
struct scsi_cmnd *scmd;
struct Scsi_Host *shost = dev->host;
struct request req;
unsigned long flags;
- int rtn;
+ int error = 0, rtn, val;
- if (scsi_autopm_get_host(shost) < 0)
- return FAILED;
+ if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
+ return -EACCES;
- if (!get_device(&dev->sdev_gendev)) {
- rtn = FAILED;
- goto out_put_autopm_host;
- }
+ error = get_user(val, arg);
+ if (error)
+ return error;
+ if (scsi_autopm_get_host(shost) < 0)
+ return -EIO;
+
+ error = -EIO;
scmd = scsi_get_command(dev, GFP_KERNEL);
- if (!scmd) {
- rtn = FAILED;
- put_device(&dev->sdev_gendev);
+ if (!scmd)
goto out_put_autopm_host;
- }
blk_rq_init(NULL, &req);
scmd->request = &req;
shost->tmf_in_progress = 1;
spin_unlock_irqrestore(shost->host_lock, flags);
- switch (flag) {
- case SCSI_TRY_RESET_DEVICE:
+ switch (val & ~SG_SCSI_RESET_NO_ESCALATE) {
+ case SG_SCSI_RESET_NOTHING:
+ rtn = SUCCESS;
+ break;
+ case SG_SCSI_RESET_DEVICE:
rtn = scsi_try_bus_device_reset(scmd);
- if (rtn == SUCCESS)
+ if (rtn == SUCCESS || (val & SG_SCSI_RESET_NO_ESCALATE))
break;
/* FALLTHROUGH */
- case SCSI_TRY_RESET_TARGET:
+ case SG_SCSI_RESET_TARGET:
rtn = scsi_try_target_reset(scmd);
- if (rtn == SUCCESS)
+ if (rtn == SUCCESS || (val & SG_SCSI_RESET_NO_ESCALATE))
break;
/* FALLTHROUGH */
- case SCSI_TRY_RESET_BUS:
+ case SG_SCSI_RESET_BUS:
rtn = scsi_try_bus_reset(scmd);
- if (rtn == SUCCESS)
+ if (rtn == SUCCESS || (val & SG_SCSI_RESET_NO_ESCALATE))
break;
/* FALLTHROUGH */
- case SCSI_TRY_RESET_HOST:
+ case SG_SCSI_RESET_HOST:
rtn = scsi_try_host_reset(scmd);
- break;
+ if (rtn == SUCCESS)
+ break;
default:
+ /* FALLTHROUGH */
rtn = FAILED;
+ break;
}
+ error = (rtn == SUCCESS) ? 0 : -EIO;
+
spin_lock_irqsave(shost->host_lock, flags);
shost->tmf_in_progress = 0;
spin_unlock_irqrestore(shost->host_lock, flags);
"waking up host to restart after TMF\n"));
wake_up(&shost->host_wait);
-
scsi_run_host_queues(shost);
- scsi_next_command(scmd);
+ scsi_put_command(scmd);
+
out_put_autopm_host:
scsi_autopm_put_host(shost);
- return rtn;
+ return error;
}
-EXPORT_SYMBOL(scsi_reset_provider);
+EXPORT_SYMBOL(scsi_ioctl_reset);
/**
* scsi_normalize_sense - normalize main elements from either fixed or
* responded to a SCSI command with the CHECK_CONDITION status.
*
* Return value:
- * 1 if valid sense data information found, else 0;
+ * true if valid sense data information found, else false;
*/
-int scsi_normalize_sense(const u8 *sense_buffer, int sb_len,
- struct scsi_sense_hdr *sshdr)
+bool scsi_normalize_sense(const u8 *sense_buffer, int sb_len,
+ struct scsi_sense_hdr *sshdr)
{
if (!sense_buffer || !sb_len)
- return 0;
+ return false;
memset(sshdr, 0, sizeof(struct scsi_sense_hdr));
sshdr->response_code = (sense_buffer[0] & 0x7f);
if (!scsi_sense_valid(sshdr))
- return 0;
+ return false;
if (sshdr->response_code >= 0x72) {
/*
}
}
- return 1;
+ return true;
}
EXPORT_SYMBOL(scsi_normalize_sense);
-int scsi_command_normalize_sense(struct scsi_cmnd *cmd,
- struct scsi_sense_hdr *sshdr)
+bool scsi_command_normalize_sense(const struct scsi_cmnd *cmd,
+ struct scsi_sense_hdr *sshdr)
{
return scsi_normalize_sense(cmd->sense_buffer,
SCSI_SENSE_BUFFERSIZE, sshdr);
sdev_printk(KERN_INFO, sdev,
"ioctl_internal_command return code = %x\n",
result);
- scsi_print_sense_hdr(" ", &sshdr);
+ scsi_print_sense_hdr(sdev, NULL, &sshdr);
break;
}
}
{
char scsi_cmd[MAX_COMMAND_SIZE];
- /* No idea how this happens.... */
- if (!sdev)
- return -ENXIO;
-
- /*
- * If we are in the middle of error recovery, don't let anyone
- * else try and use this device. Also, if error recovery fails, it
- * may try and take the device offline, in which case all further
- * access to the device is prohibited.
- */
- if (!scsi_block_when_processing_errors(sdev))
- return -ENODEV;
-
/* Check for deprecated ioctls ... all the ioctls which don't
* follow the new unique numbering scheme are deprecated */
switch (cmd) {
START_STOP_TIMEOUT, NORMAL_RETRIES);
case SCSI_IOCTL_GET_PCI:
return scsi_ioctl_get_pci(sdev, arg);
+ case SG_SCSI_RESET:
+ return scsi_ioctl_reset(sdev, arg);
default:
if (sdev->host->hostt->ioctl)
return sdev->host->hostt->ioctl(sdev, cmd, arg);
}
EXPORT_SYMBOL(scsi_ioctl);
-/**
- * scsi_nonblockable_ioctl() - Handle SG_SCSI_RESET
- * @sdev: scsi device receiving ioctl
- * @cmd: Must be SC_SCSI_RESET
- * @arg: pointer to int containing SG_SCSI_RESET_{DEVICE,BUS,HOST}
- * @ndelay: file mode O_NDELAY flag
+/*
+ * We can process a reset even when a device isn't fully operable.
*/
-int scsi_nonblockable_ioctl(struct scsi_device *sdev, int cmd,
- void __user *arg, int ndelay)
+int scsi_ioctl_block_when_processing_errors(struct scsi_device *sdev, int cmd,
+ bool ndelay)
{
- int val, result;
-
- /* The first set of iocts may be executed even if we're doing
- * error processing, as long as the device was opened
- * non-blocking */
- if (ndelay) {
+ if (cmd == SG_SCSI_RESET && ndelay) {
if (scsi_host_in_recovery(sdev->host))
+ return -EAGAIN;
+ } else {
+ if (!scsi_block_when_processing_errors(sdev))
return -ENODEV;
- } else if (!scsi_block_when_processing_errors(sdev))
- return -ENODEV;
-
- switch (cmd) {
- case SG_SCSI_RESET:
- result = get_user(val, (int __user *)arg);
- if (result)
- return result;
- if (val == SG_SCSI_RESET_NOTHING)
- return 0;
- switch (val) {
- case SG_SCSI_RESET_DEVICE:
- val = SCSI_TRY_RESET_DEVICE;
- break;
- case SG_SCSI_RESET_TARGET:
- val = SCSI_TRY_RESET_TARGET;
- break;
- case SG_SCSI_RESET_BUS:
- val = SCSI_TRY_RESET_BUS;
- break;
- case SG_SCSI_RESET_HOST:
- val = SCSI_TRY_RESET_HOST;
- break;
- default:
- return -EINVAL;
- }
- if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
- return -EACCES;
- return (scsi_reset_provider(sdev, val) ==
- SUCCESS) ? 0 : -EIO;
}
- return -ENODEV;
+
+ return 0;
}
-EXPORT_SYMBOL(scsi_nonblockable_ioctl);
+EXPORT_SYMBOL_GPL(scsi_ioctl_block_when_processing_errors);
#include <linux/hardirq.h>
#include <linux/scatterlist.h>
#include <linux/blk-mq.h>
+#include <linux/ratelimit.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
mempool_t *pool;
};
-#define SP(x) { x, "sgpool-" __stringify(x) }
+#define SP(x) { .size = x, "sgpool-" __stringify(x) }
#if (SCSI_MAX_SG_SEGMENTS < 32)
#error SCSI_MAX_SG_SEGMENTS is too small (must be 32 or greater)
#endif
put_device(&sdev->sdev_gendev);
}
-void scsi_next_command(struct scsi_cmnd *cmd)
-{
- struct scsi_device *sdev = cmd->device;
- struct request_queue *q = sdev->request_queue;
-
- scsi_put_command(cmd);
- scsi_run_queue(q);
-
- put_device(&sdev->sdev_gendev);
-}
-
void scsi_run_host_queues(struct Scsi_Host *shost)
{
struct scsi_device *sdev;
__sg_free_table(&sdb->table, SCSI_MAX_SG_SEGMENTS, mq, scsi_sg_free);
}
-static int scsi_alloc_sgtable(struct scsi_data_buffer *sdb, int nents,
- gfp_t gfp_mask, bool mq)
+static int scsi_alloc_sgtable(struct scsi_data_buffer *sdb, int nents, bool mq)
{
struct scatterlist *first_chunk = NULL;
+ gfp_t gfp_mask = mq ? GFP_NOIO : GFP_ATOMIC;
int ret;
BUG_ON(!nents);
kblockd_schedule_work(&sdev->requeue_work);
else
blk_mq_start_stopped_hw_queues(q, true);
-
- put_device(&sdev->sdev_gendev);
} else {
unsigned long flags;
spin_unlock_irqrestore(q->queue_lock, flags);
scsi_release_buffers(cmd);
- scsi_next_command(cmd);
+
+ scsi_put_command(cmd);
+ scsi_run_queue(q);
}
+ put_device(&sdev->sdev_gendev);
return false;
}
struct request *req = cmd->request;
int error = 0;
struct scsi_sense_hdr sshdr;
- int sense_valid = 0;
- int sense_deferred = 0;
+ bool sense_valid = false;
+ int sense_deferred = 0, level = 0;
enum {ACTION_FAIL, ACTION_REPREP, ACTION_RETRY,
ACTION_DELAYED_RETRY} action;
unsigned long wait_for = (cmd->allowed + 1) * req->timeout;
if ((sshdr.asc == 0x0) && (sshdr.ascq == 0x1d))
;
else if (!(req->cmd_flags & REQ_QUIET))
- scsi_print_sense("", cmd);
+ scsi_print_sense(cmd);
result = 0;
/* BLOCK_PC may have set error */
error = 0;
case ACTION_FAIL:
/* Give up and fail the remainder of the request */
if (!(req->cmd_flags & REQ_QUIET)) {
- scsi_print_result(cmd);
- if (driver_byte(result) & DRIVER_SENSE)
- scsi_print_sense("", cmd);
- scsi_print_command(cmd);
+ static DEFINE_RATELIMIT_STATE(_rs,
+ DEFAULT_RATELIMIT_INTERVAL,
+ DEFAULT_RATELIMIT_BURST);
+
+ if (unlikely(scsi_logging_level))
+ level = SCSI_LOG_LEVEL(SCSI_LOG_MLCOMPLETE_SHIFT,
+ SCSI_LOG_MLCOMPLETE_BITS);
+
+ /*
+ * if logging is enabled the failure will be printed
+ * in scsi_log_completion(), so avoid duplicate messages
+ */
+ if (!level && __ratelimit(&_rs)) {
+ scsi_print_result(cmd, NULL, FAILED);
+ if (driver_byte(result) & DRIVER_SENSE)
+ scsi_print_sense(cmd);
+ scsi_print_command(cmd);
+ }
}
if (!scsi_end_request(req, error, blk_rq_err_bytes(req), 0))
return;
}
}
-static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb,
- gfp_t gfp_mask)
+static int scsi_init_sgtable(struct request *req, struct scsi_data_buffer *sdb)
{
int count;
* If sg table allocation fails, requeue request later.
*/
if (unlikely(scsi_alloc_sgtable(sdb, req->nr_phys_segments,
- gfp_mask, req->mq_ctx != NULL)))
+ req->mq_ctx != NULL)))
return BLKPREP_DEFER;
/*
* BLKPREP_DEFER if the failure is retryable
* BLKPREP_KILL if the failure is fatal
*/
-int scsi_init_io(struct scsi_cmnd *cmd, gfp_t gfp_mask)
+int scsi_init_io(struct scsi_cmnd *cmd)
{
struct scsi_device *sdev = cmd->device;
struct request *rq = cmd->request;
BUG_ON(!rq->nr_phys_segments);
- error = scsi_init_sgtable(rq, &cmd->sdb, gfp_mask);
+ error = scsi_init_sgtable(rq, &cmd->sdb);
if (error)
goto err_exit;
rq->next_rq->special = bidi_sdb;
}
- error = scsi_init_sgtable(rq->next_rq, rq->next_rq->special,
- GFP_ATOMIC);
+ error = scsi_init_sgtable(rq->next_rq, rq->next_rq->special);
if (error)
goto err_exit;
}
BUG_ON(prot_sdb == NULL);
ivecs = blk_rq_count_integrity_sg(rq->q, rq->bio);
- if (scsi_alloc_sgtable(prot_sdb, ivecs, gfp_mask, is_mq)) {
+ if (scsi_alloc_sgtable(prot_sdb, ivecs, is_mq)) {
error = BLKPREP_DEFER;
goto err_exit;
}
* submit a request without an attached bio.
*/
if (req->bio) {
- int ret = scsi_init_io(cmd, GFP_ATOMIC);
+ int ret = scsi_init_io(cmd);
if (unlikely(ret))
return ret;
} else {
}
}
+/**
+ * scsi_dispatch_command - Dispatch a command to the low-level driver.
+ * @cmd: command block we are dispatching.
+ *
+ * Return: nonzero return request was rejected and device's queue needs to be
+ * plugged.
+ */
+static int scsi_dispatch_cmd(struct scsi_cmnd *cmd)
+{
+ struct Scsi_Host *host = cmd->device->host;
+ int rtn = 0;
+
+ atomic_inc(&cmd->device->iorequest_cnt);
+
+ /* check if the device is still usable */
+ if (unlikely(cmd->device->sdev_state == SDEV_DEL)) {
+ /* in SDEV_DEL we error all commands. DID_NO_CONNECT
+ * returns an immediate error upwards, and signals
+ * that the device is no longer present */
+ cmd->result = DID_NO_CONNECT << 16;
+ goto done;
+ }
+
+ /* Check to see if the scsi lld made this device blocked. */
+ if (unlikely(scsi_device_blocked(cmd->device))) {
+ /*
+ * in blocked state, the command is just put back on
+ * the device queue. The suspend state has already
+ * blocked the queue so future requests should not
+ * occur until the device transitions out of the
+ * suspend state.
+ */
+ SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd,
+ "queuecommand : device blocked\n"));
+ return SCSI_MLQUEUE_DEVICE_BUSY;
+ }
+
+ /* Store the LUN value in cmnd, if needed. */
+ if (cmd->device->lun_in_cdb)
+ cmd->cmnd[1] = (cmd->cmnd[1] & 0x1f) |
+ (cmd->device->lun << 5 & 0xe0);
+
+ scsi_log_send(cmd);
+
+ /*
+ * Before we queue this command, check if the command
+ * length exceeds what the host adapter can handle.
+ */
+ if (cmd->cmd_len > cmd->device->host->max_cmd_len) {
+ SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd,
+ "queuecommand : command too long. "
+ "cdb_size=%d host->max_cmd_len=%d\n",
+ cmd->cmd_len, cmd->device->host->max_cmd_len));
+ cmd->result = (DID_ABORT << 16);
+ goto done;
+ }
+
+ if (unlikely(host->shost_state == SHOST_DEL)) {
+ cmd->result = (DID_NO_CONNECT << 16);
+ goto done;
+
+ }
+
+ trace_scsi_dispatch_cmd_start(cmd);
+ rtn = host->hostt->queuecommand(host, cmd);
+ if (rtn) {
+ trace_scsi_dispatch_cmd_error(cmd, rtn);
+ if (rtn != SCSI_MLQUEUE_DEVICE_BUSY &&
+ rtn != SCSI_MLQUEUE_TARGET_BUSY)
+ rtn = SCSI_MLQUEUE_HOST_BUSY;
+
+ SCSI_LOG_MLQUEUE(3, scmd_printk(KERN_INFO, cmd,
+ "queuecommand : request rejected\n"));
+ }
+
+ return rtn;
+ done:
+ cmd->scsi_done(cmd);
+ return 0;
+}
+
/**
* scsi_done - Invoke completion on finished SCSI command.
* @cmd: The SCSI Command for which a low-level device driver (LLDD) gives
* we add the dev to the starved list so it eventually gets
* a run when a tag is freed.
*/
- if (blk_queue_tagged(q) && !blk_rq_tagged(req)) {
+ if (blk_queue_tagged(q) && !(req->cmd_flags & REQ_QUEUED)) {
spin_lock_irq(shost->host_lock);
if (list_empty(&sdev->starved_entry))
list_add_tail(&sdev->starved_entry,
if (!scsi_host_queue_ready(q, shost, sdev))
goto host_not_ready;
+
+ if (sdev->simple_tags)
+ cmd->flags |= SCMD_TAGGED;
+ else
+ cmd->flags &= ~SCMD_TAGGED;
/*
* Finally, initialize any error handling parameters, and set up
blk_mq_start_request(req);
}
+ if (sdev->simple_tags)
+ cmd->flags |= SCMD_TAGGED;
+ else
+ cmd->flags &= ~SCMD_TAGGED;
+
scsi_init_cmd_errh(cmd);
cmd->scsi_done = scsi_mq_done;
memset(&shost->tag_set, 0, sizeof(shost->tag_set));
shost->tag_set.ops = &scsi_mq_ops;
- shost->tag_set.nr_hw_queues = 1;
+ shost->tag_set.nr_hw_queues = shost->nr_hw_queues ? : 1;
shost->tag_set.queue_depth = shost->can_queue;
shost->tag_set.cmd_size = cmd_size;
shost->tag_set.numa_node = NUMA_NO_NODE;
} while (0); \
} while (0)
#else
+#define SCSI_LOG_LEVEL(SHIFT, BITS) 0
#define SCSI_CHECK_LOGGING(SHIFT, BITS, LEVEL, CMD)
#endif /* CONFIG_SCSI_LOGGING */
extern void scsi_exit_hosts(void);
/* scsi.c */
-extern int scsi_dispatch_cmd(struct scsi_cmnd *cmd);
extern int scsi_setup_command_freelist(struct Scsi_Host *shost);
extern void scsi_destroy_command_freelist(struct Scsi_Host *shost);
#ifdef CONFIG_SCSI_LOGGING
extern int scsi_maybe_unblock_host(struct scsi_device *sdev);
extern void scsi_device_unbusy(struct scsi_device *sdev);
extern void scsi_queue_insert(struct scsi_cmnd *cmd, int reason);
-extern void scsi_next_command(struct scsi_cmnd *cmd);
extern void scsi_io_completion(struct scsi_cmnd *, unsigned int);
extern void scsi_run_host_queues(struct Scsi_Host *shost);
extern struct request_queue *scsi_alloc_queue(struct scsi_device *sdev);
}
WARN_ON_ONCE(!blk_get_queue(sdev->request_queue));
sdev->request_queue->queuedata = sdev;
- scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
+
+ if (!shost_use_blk_mq(sdev->host) &&
+ (shost->bqt || shost->hostt->use_blk_tags)) {
+ blk_queue_init_tags(sdev->request_queue,
+ sdev->host->cmd_per_lun, shost->bqt);
+ }
+ scsi_change_queue_depth(sdev, sdev->host->cmd_per_lun);
scsi_sysfs_device_initialize(sdev);
(inq_result[3] & 0x0f) == 1 ? " CCS" : "");
if ((sdev->scsi_level >= SCSI_2) && (inq_result[7] & 2) &&
- !(*bflags & BLIST_NOTQ))
+ !(*bflags & BLIST_NOTQ)) {
sdev->tagged_supported = 1;
+ sdev->simple_tags = 1;
+ }
/*
* Some devices (Texel CD ROM drives) have handshaking problems
sparse_lun = 0;
/*
- * If less than SCSI_1_CSS, and no special lun scaning, stop
+ * If less than SCSI_1_CCS, and no special lun scanning, stop
* scanning; this matches 2.4 behaviour, but could just be a bug
- * (to continue scanning a SCSI_1_CSS device).
+ * (to continue scanning a SCSI_1_CCS device).
*
* This test is broken. We might not have any device on lun0 for
* a sparselun device, and if that's the case then how would we
void scsi_rescan_device(struct device *dev)
{
- struct scsi_driver *drv;
-
if (!dev->driver)
return;
- drv = to_scsi_driver(dev->driver);
- if (try_module_get(drv->owner)) {
+ if (try_module_get(dev->driver->owner)) {
+ struct scsi_driver *drv = to_scsi_driver(dev->driver);
+
if (drv->rescan)
drv->rescan(dev);
- module_put(drv->owner);
+ module_put(dev->driver->owner);
}
}
EXPORT_SYMBOL(scsi_rescan_device);
if (((channel != SCAN_WILD_CARD) && (channel > shost->max_channel)) ||
((id != SCAN_WILD_CARD) && (id >= shost->max_id)) ||
- ((lun != SCAN_WILD_CARD) && (lun > shost->max_lun)))
+ ((lun != SCAN_WILD_CARD) && (lun >= shost->max_lun)))
return -EINVAL;
mutex_lock(&shost->scan_mutex);
struct scsi_device *sdev = to_scsi_device(dev);
const char *name = "none";
- if (sdev->ordered_tags)
- name = "ordered";
- else if (sdev->simple_tags)
+ if (sdev->simple_tags)
name = "simple";
return snprintf(buf, 20, "%s\n", name);
if (!sdev->tagged_supported || !sht->change_queue_type)
return -EINVAL;
- if (strncmp(buf, "ordered", 7) == 0)
- tag_type = MSG_ORDERED_TAG;
- else if (strncmp(buf, "simple", 6) == 0)
+ /*
+ * We're never issueing order tags these days, but allow the value
+ * for backwards compatibility.
+ */
+ if (strncmp(buf, "ordered", 7) == 0 ||
+ strncmp(buf, "simple", 6) == 0)
tag_type = MSG_SIMPLE_TAG;
else if (strncmp(buf, "none", 4) != 0)
return -EINVAL;
depth = simple_strtoul(buf, NULL, 0);
- if (depth < 1)
+ if (depth < 1 || depth > sht->can_queue)
return -EINVAL;
- retval = sht->change_queue_depth(sdev, depth,
- SCSI_QDEPTH_DEFAULT);
+ retval = sht->change_queue_depth(sdev, depth);
if (retval < 0)
return retval;
return scsi_trace_rw16(p, cdb, len);
case UNMAP:
return scsi_trace_unmap(p, cdb, len);
- case SERVICE_ACTION_IN:
+ case SERVICE_ACTION_IN_16:
return scsi_trace_service_action_in(p, cdb, len);
case VARIABLE_LENGTH_CMD:
return scsi_trace_varlen(p, cdb, len);
#include <scsi/scsi_host.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_eh.h>
+#include <scsi/scsi_tcq.h>
#include <scsi/scsi_transport.h>
#include <scsi/scsi_transport_spi.h>
}
EXPORT_SYMBOL_GPL(spi_populate_ppr_msg);
+/**
+ * spi_populate_tag_msg - place a tag message in a buffer
+ * @msg: pointer to the area to place the tag
+ * @cmd: pointer to the scsi command for the tag
+ *
+ * Notes:
+ * designed to create the correct type of tag message for the
+ * particular request. Returns the size of the tag message.
+ * May return 0 if TCQ is disabled for this device.
+ **/
+int spi_populate_tag_msg(unsigned char *msg, struct scsi_cmnd *cmd)
+{
+ if (cmd->flags & SCMD_TAGGED) {
+ *msg++ = MSG_SIMPLE_TAG;
+ *msg++ = cmd->request->tag;
+ return 2;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(spi_populate_tag_msg);
+
#ifdef CONFIG_SCSI_CONSTANTS
static const char * const one_byte_msgs[] = {
/* 0x00 */ "Task Complete", NULL /* Extended Message */, "Save Pointers",
end_head * end_sector + end_sector;
/* This is the actual _sector_ number at the end */
- logical_end = get_unaligned(&largest->start_sect)
- + get_unaligned(&largest->nr_sects);
+ logical_end = get_unaligned_le32(&largest->start_sect)
+ + get_unaligned_le32(&largest->nr_sects);
/* This is for >1023 cylinders */
ext_cyl = (logical_end - (end_head * end_sector + end_sector))
static void sd_read_capacity(struct scsi_disk *sdkp, unsigned char *buffer);
static void scsi_disk_release(struct device *cdev);
static void sd_print_sense_hdr(struct scsi_disk *, struct scsi_sense_hdr *);
-static void sd_print_result(struct scsi_disk *, int);
+static void sd_print_result(const struct scsi_disk *, const char *, int);
static DEFINE_SPINLOCK(sd_index_lock);
static DEFINE_IDA(sd_index_ida);
};
static struct scsi_driver sd_template = {
- .owner = THIS_MODULE,
.gendrv = {
.name = "sd",
+ .owner = THIS_MODULE,
.probe = sd_probe,
.remove = sd_remove,
.shutdown = sd_shutdown,
unsigned int logical_block_size = sdkp->device->sector_size;
unsigned int max_blocks = 0;
- q->limits.discard_zeroes_data = sdkp->lbprz;
+ q->limits.discard_zeroes_data = 0;
q->limits.discard_alignment = sdkp->unmap_alignment *
logical_block_size;
q->limits.discard_granularity =
case SD_LBP_WS16:
max_blocks = min_not_zero(sdkp->max_ws_blocks,
(u32)SD_MAX_WS16_BLOCKS);
+ q->limits.discard_zeroes_data = sdkp->lbprz;
break;
case SD_LBP_WS10:
max_blocks = min_not_zero(sdkp->max_ws_blocks,
(u32)SD_MAX_WS10_BLOCKS);
+ q->limits.discard_zeroes_data = sdkp->lbprz;
break;
case SD_LBP_ZERO:
* amount of blocks described by the request.
*/
blk_add_request_payload(rq, page, len);
- ret = scsi_init_io(cmd, GFP_ATOMIC);
+ ret = scsi_init_io(cmd);
rq->__data_len = nr_bytes;
out:
* knows how much to actually write.
*/
rq->__data_len = sdp->sector_size;
- ret = scsi_init_io(cmd, GFP_ATOMIC);
+ ret = scsi_init_io(cmd);
rq->__data_len = nr_bytes;
return ret;
}
int ret;
unsigned char protect;
- ret = scsi_init_io(SCpnt, GFP_ATOMIC);
+ ret = scsi_init_io(SCpnt);
if (ret != BLKPREP_OK)
goto out;
SCpnt = rq->special;
* may try and take the device offline, in which case all further
* access to the device is prohibited.
*/
- error = scsi_nonblockable_ioctl(sdp, cmd, p,
- (mode & FMODE_NDELAY) != 0);
- if (!scsi_block_when_processing_errors(sdp) || !error)
+ error = scsi_ioctl_block_when_processing_errors(sdp, cmd,
+ (mode & FMODE_NDELAY) != 0);
+ if (error)
goto out;
/*
}
if (res) {
- sd_print_result(sdkp, res);
+ sd_print_result(sdkp, "Synchronize Cache(10) failed", res);
if (driver_byte(res) & DRIVER_SENSE)
sd_print_sense_hdr(sdkp, &sshdr);
unsigned int cmd, unsigned long arg)
{
struct scsi_device *sdev = scsi_disk(bdev->bd_disk)->device;
- int ret;
-
- ret = scsi_verify_blk_ioctl(bdev, cmd);
- if (ret < 0)
- return ret;
+ int error;
- /*
- * If we are in the middle of error recovery, don't let anyone
- * else try and use this device. Also, if error recovery fails, it
- * may try and take the device offline, in which case all further
- * access to the device is prohibited.
- */
- if (!scsi_block_when_processing_errors(sdev))
- return -ENODEV;
+ error = scsi_ioctl_block_when_processing_errors(sdev, cmd,
+ (mode & FMODE_NDELAY) != 0);
+ if (error)
+ return error;
- if (sdev->host->hostt->compat_ioctl) {
- ret = sdev->host->hostt->compat_ioctl(sdev, cmd, (void __user *)arg);
-
- return ret;
- }
-
/*
* Let the static ioctl translation table take care of it.
*/
- return -ENOIOCTLCMD;
+ if (!sdev->host->hostt->compat_ioctl)
+ return -ENOIOCTLCMD;
+ return sdev->host->hostt->compat_ioctl(sdev, cmd, (void __user *)arg);
}
#endif
if (sense_valid)
sense_deferred = scsi_sense_is_deferred(&sshdr);
}
-#ifdef CONFIG_SCSI_LOGGING
- SCSI_LOG_HLCOMPLETE(1, scsi_print_result(SCpnt));
- if (sense_valid) {
- SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, SCpnt,
- "sd_done: sb[respc,sk,asc,"
- "ascq]=%x,%x,%x,%x\n",
- sshdr.response_code,
- sshdr.sense_key, sshdr.asc,
- sshdr.ascq));
- }
-#endif
sdkp->medium_access_timed_out = 0;
if (driver_byte(result) != DRIVER_SENSE &&
* unknown amount of data was transferred so treat it as an
* error.
*/
- scsi_print_sense("sd", SCpnt);
SCpnt->result = 0;
memset(SCpnt->sense_buffer, 0, SCSI_SENSE_BUFFERSIZE);
break;
break;
}
out:
+ SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, SCpnt,
+ "sd_done: completed %d of %d bytes\n",
+ good_bytes, scsi_bufflen(SCpnt)));
+
if (rq_data_dir(SCpnt->request) == READ && scsi_prot_sg_count(SCpnt))
sd_dif_complete(SCpnt, good_bytes);
/* no sense, TUR either succeeded or failed
* with a status error */
if(!spintime && !scsi_status_is_good(the_result)) {
- sd_printk(KERN_NOTICE, sdkp, "Unit Not Ready\n");
- sd_print_result(sdkp, the_result);
+ sd_print_result(sdkp, "Test Unit Ready failed",
+ the_result);
}
break;
}
-
+
/*
* The device does not want the automatic start to be issued.
*/
struct scsi_sense_hdr *sshdr, int sense_valid,
int the_result)
{
- sd_print_result(sdkp, the_result);
if (driver_byte(the_result) & DRIVER_SENSE)
sd_print_sense_hdr(sdkp, sshdr);
else
do {
memset(cmd, 0, 16);
- cmd[0] = SERVICE_ACTION_IN;
+ cmd[0] = SERVICE_ACTION_IN_16;
cmd[1] = SAI_READ_CAPACITY_16;
cmd[13] = RC16_LEN;
memset(buffer, 0, RC16_LEN);
} while (the_result && retries);
if (the_result) {
- sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY(16) failed\n");
+ sd_print_result(sdkp, "Read Capacity(16) failed", the_result);
read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result);
return -EINVAL;
}
} while (the_result && retries);
if (the_result) {
- sd_printk(KERN_NOTICE, sdkp, "READ CAPACITY failed\n");
+ sd_print_result(sdkp, "Read Capacity(10) failed", the_result);
read_capacity_error(sdkp, sdp, &sshdr, sense_valid, the_result);
return -EINVAL;
}
} else { /* LBP VPD page tells us what to use */
- if (sdkp->lbpu && sdkp->max_unmap_blocks)
- sd_config_discard(sdkp, SD_LBP_UNMAP);
- else if (sdkp->lbpws)
+ if (sdkp->lbpws)
sd_config_discard(sdkp, SD_LBP_WS16);
else if (sdkp->lbpws10)
sd_config_discard(sdkp, SD_LBP_WS10);
+ else if (sdkp->lbpu && sdkp->max_unmap_blocks)
+ sd_config_discard(sdkp, SD_LBP_UNMAP);
else
sd_config_discard(sdkp, SD_LBP_DISABLE);
}
res = scsi_execute_req_flags(sdp, cmd, DMA_NONE, NULL, 0, &sshdr,
SD_TIMEOUT, SD_MAX_RETRIES, NULL, REQ_PM);
if (res) {
- sd_printk(KERN_WARNING, sdkp, "START_STOP FAILED\n");
- sd_print_result(sdkp, res);
+ sd_print_result(sdkp, "Start/Stop Unit failed", res);
if (driver_byte(res) & DRIVER_SENSE)
sd_print_sense_hdr(sdkp, &sshdr);
if (scsi_sense_valid(&sshdr) &&
static void sd_print_sense_hdr(struct scsi_disk *sdkp,
struct scsi_sense_hdr *sshdr)
{
- sd_printk(KERN_INFO, sdkp, " ");
- scsi_show_sense_hdr(sshdr);
- sd_printk(KERN_INFO, sdkp, " ");
- scsi_show_extd_sense(sshdr->asc, sshdr->ascq);
+ scsi_show_sense_hdr(sdkp->device,
+ sdkp->disk ? sdkp->disk->disk_name : NULL, sshdr);
+ scsi_show_extd_sense(sdkp->device,
+ sdkp->disk ? sdkp->disk->disk_name : NULL,
+ sshdr->asc, sshdr->ascq);
}
-static void sd_print_result(struct scsi_disk *sdkp, int result)
+static void sd_print_result(const struct scsi_disk *sdkp, const char *msg,
+ int result)
{
- sd_printk(KERN_INFO, sdkp, " ");
- scsi_show_result(result);
+ const char *hb_string = scsi_hostbyte_string(result);
+ const char *db_string = scsi_driverbyte_string(result);
+
+ if (hb_string || db_string)
+ sd_printk(KERN_INFO, sdkp,
+ "%s: Result: hostbyte=%s driverbyte=%s\n", msg,
+ hb_string ? hb_string : "invalid",
+ db_string ? db_string : "invalid");
+ else
+ sd_printk(KERN_INFO, sdkp,
+ "%s: Result: hostbyte=0x%02x driverbyte=0x%02x\n",
+ msg, host_byte(result), driver_byte(result));
}
#define sd_printk(prefix, sdsk, fmt, a...) \
(sdsk)->disk ? \
- sdev_printk(prefix, (sdsk)->device, "[%s] " fmt, \
- (sdsk)->disk->disk_name, ##a) : \
- sdev_printk(prefix, (sdsk)->device, fmt, ##a)
+ sdev_prefix_printk(prefix, (sdsk)->device, \
+ (sdsk)->disk->disk_name, fmt, ##a) : \
+ sdev_printk(prefix, (sdsk)->device, fmt, ##a)
#define sd_first_printk(prefix, sdsk, fmt, a...) \
do { \
};
static struct scsi_driver ses_template = {
- .owner = THIS_MODULE,
.gendrv = {
.name = "ses",
+ .owner = THIS_MODULE,
.probe = ses_probe,
.remove = ses_remove,
},
#define SZ_SG_REQ_INFO sizeof(sg_req_info_t)
#define sg_printk(prefix, sdp, fmt, a...) \
- sdev_printk(prefix, (sdp)->device, "[%s] " fmt, \
- (sdp)->disk->disk_name, ##a)
+ sdev_prefix_printk(prefix, (sdp)->device, \
+ (sdp)->disk->disk_name, fmt, ##a)
static int sg_allow_access(struct file *filp, unsigned char *cmd)
{
if (atomic_read(&sdp->detaching))
return -ENODEV;
return put_user(sdp->device->host->hostt->emulated, ip);
- case SG_SCSI_RESET:
- if (atomic_read(&sdp->detaching))
- return -ENODEV;
- if (filp->f_flags & O_NONBLOCK) {
- if (scsi_host_in_recovery(sdp->device->host))
- return -EBUSY;
- } else if (!scsi_block_when_processing_errors(sdp->device))
- return -EBUSY;
- result = get_user(val, ip);
- if (result)
- return result;
- if (SG_SCSI_RESET_NOTHING == val)
- return 0;
- switch (val) {
- case SG_SCSI_RESET_DEVICE:
- val = SCSI_TRY_RESET_DEVICE;
- break;
- case SG_SCSI_RESET_TARGET:
- val = SCSI_TRY_RESET_TARGET;
- break;
- case SG_SCSI_RESET_BUS:
- val = SCSI_TRY_RESET_BUS;
- break;
- case SG_SCSI_RESET_HOST:
- val = SCSI_TRY_RESET_HOST;
- break;
- default:
- return -EINVAL;
- }
- if (!capable(CAP_SYS_ADMIN) || !capable(CAP_SYS_RAWIO))
- return -EACCES;
- return (scsi_reset_provider(sdp->device, val) ==
- SUCCESS) ? 0 : -EIO;
case SCSI_IOCTL_SEND_COMMAND:
if (atomic_read(&sdp->detaching))
return -ENODEV;
return result;
sdp->sgdebug = (char) val;
return 0;
- case SCSI_IOCTL_GET_IDLUN:
- case SCSI_IOCTL_GET_BUS_NUMBER:
- case SCSI_IOCTL_PROBE_HOST:
- case SG_GET_TRANSFORM:
- if (atomic_read(&sdp->detaching))
- return -ENODEV;
- return scsi_ioctl(sdp->device, cmd_in, p);
case BLKSECTGET:
return put_user(max_sectors_bytes(sdp->device->request_queue),
ip);
return blk_trace_startstop(sdp->device->request_queue, 0);
case BLKTRACETEARDOWN:
return blk_trace_remove(sdp->device->request_queue);
+ case SCSI_IOCTL_GET_IDLUN:
+ case SCSI_IOCTL_GET_BUS_NUMBER:
+ case SCSI_IOCTL_PROBE_HOST:
+ case SG_GET_TRANSFORM:
+ case SG_SCSI_RESET:
+ if (atomic_read(&sdp->detaching))
+ return -ENODEV;
+ break;
default:
if (read_only)
return -EPERM; /* don't know so take safe approach */
- return scsi_ioctl(sdp->device, cmd_in, p);
+ break;
}
+
+ result = scsi_ioctl_block_when_processing_errors(sdp->device,
+ cmd_in, filp->f_flags & O_NDELAY);
+ if (result)
+ return result;
+ return scsi_ioctl(sdp->device, cmd_in, p);
}
#ifdef CONFIG_COMPAT
if ((sdp->sgdebug > 0) &&
((CHECK_CONDITION == srp->header.masked_status) ||
(COMMAND_TERMINATED == srp->header.masked_status)))
- __scsi_print_sense(__func__, sense,
+ __scsi_print_sense(sdp->device, __func__, sense,
SCSI_SENSE_BUFFERSIZE);
/* Following if statement is a patch supplied by Eric Youngdale */
};
static struct scsi_driver sr_template = {
- .owner = THIS_MODULE,
.gendrv = {
.name = "sr",
+ .owner = THIS_MODULE,
.probe = sr_probe,
.remove = sr_remove,
.pm = &sr_pm_ops,
struct request *rq = SCpnt->request;
int ret;
- ret = scsi_init_io(SCpnt, GFP_ATOMIC);
+ ret = scsi_init_io(SCpnt);
if (ret != BLKPREP_OK)
goto out;
SCpnt = rq->special;
mutex_lock(&sr_mutex);
+ ret = scsi_ioctl_block_when_processing_errors(sdev, cmd,
+ (mode & FMODE_NDELAY) != 0);
+ if (ret)
+ goto out;
+
/*
* Send SCSI addressing ioctls directly to mid level, send other
* ioctls to cdrom/block level.
if (ret != -ENOSYS)
goto out;
- /*
- * ENODEV means that we didn't recognise the ioctl, or that we
- * cannot execute it in the current device state. In either
- * case fall through to scsi_ioctl, which will return ENDOEV again
- * if it doesn't recognise the ioctl
- */
- ret = scsi_nonblockable_ioctl(sdev, cmd, argp,
- (mode & FMODE_NDELAY) != 0);
- if (ret != -ENODEV)
- goto out;
ret = scsi_ioctl(sdev, cmd, argp);
out:
} Scsi_CD;
#define sr_printk(prefix, cd, fmt, a...) \
- sdev_printk(prefix, (cd)->device, "[%s] " fmt, \
- (cd)->cdi.name, ##a)
+ sdev_prefix_printk(prefix, (cd)->device, (cd)->cdi.name, fmt, ##a)
int sr_do_ioctl(Scsi_CD *, struct packet_command *);
"CDROM not ready. Make sure there "
"is a disc in the drive.\n");
#ifdef DEBUG
- scsi_print_sense_hdr("sr", &sshdr);
+ scsi_print_sense_hdr(cd->device, cd->cdi.name, &sshdr);
#endif
err = -ENOMEDIUM;
break;
/* sense: Invalid command operation code */
err = -EDRIVE_CANT_DO_THIS;
#ifdef DEBUG
- __scsi_print_command(cgc->cmd);
- scsi_print_sense_hdr("sr", &sshdr);
+ __scsi_print_command(cgc->cmd, CDROM_PACKET_SIZE);
+ scsi_print_sense_hdr(cd->device, cd->cdi.name, &sshdr);
#endif
break;
default:
sr_printk(KERN_ERR, cd,
"CDROM (ioctl) error, command: ");
- __scsi_print_command(cgc->cmd);
- scsi_print_sense_hdr("sr", &sshdr);
+ __scsi_print_command(cgc->cmd, CDROM_PACKET_SIZE);
+ scsi_print_sense_hdr(cd->device, cd->cdi.name, &sshdr);
err = -EIO;
}
}
/* The driver prints some debugging information on the console if DEBUG
is defined and non-zero. */
-#define DEBUG 0
+#define DEBUG 1
+#define NO_DEBUG 0
#define ST_DEB_MSG KERN_NOTICE
#if DEBUG
static int try_direct_io = TRY_DIRECT_IO;
static int try_rdio = 1;
static int try_wdio = 1;
+static int debug_flag;
static struct class st_sysfs_class;
static const struct attribute_group *st_dev_groups[];
MODULE_PARM_DESC(max_sg_segs, "Maximum number of scatter/gather segments to use (256)");
module_param_named(try_direct_io, try_direct_io, int, 0);
MODULE_PARM_DESC(try_direct_io, "Try direct I/O between user buffer and tape drive (1)");
+module_param_named(debug_flag, debug_flag, int, 0);
+MODULE_PARM_DESC(debug_flag, "Enable DEBUG, same as setting debugging=1");
+
/* Extra parameters for testing */
module_param_named(try_rdio, try_rdio, int, 0);
},
{
"try_direct_io", &try_direct_io
+ },
+ {
+ "debug_flag", &debug_flag
}
};
#endif
static void do_remove_sysfs_files(void);
static struct scsi_driver st_template = {
- .owner = THIS_MODULE,
.gendrv = {
.name = "st",
+ .owner = THIS_MODULE,
.probe = st_probe,
.remove = st_remove,
},
}
#define st_printk(prefix, t, fmt, a...) \
- sdev_printk(prefix, (t)->device, "%s: " fmt, \
- tape_name(t), ##a)
+ sdev_prefix_printk(prefix, (t)->device, tape_name(t), fmt, ##a)
#ifdef DEBUG
#define DEBC_printk(t, fmt, a...) \
if (debugging) { st_printk(ST_DEB_MSG, t, fmt, ##a ); }
SRpnt->cmd[0], SRpnt->cmd[1], SRpnt->cmd[2],
SRpnt->cmd[3], SRpnt->cmd[4], SRpnt->cmd[5]);
if (cmdstatp->have_sense)
- __scsi_print_sense(name, SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
+ __scsi_print_sense(STp->device, name,
+ SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
} ) /* end DEB */
if (!debugging) { /* Abnormal conditions for tape */
if (!cmdstatp->have_sense)
SRpnt->cmd[0] != MODE_SENSE &&
SRpnt->cmd[0] != TEST_UNIT_READY) {
- __scsi_print_sense(name, SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
+ __scsi_print_sense(STp->device, name,
+ SRpnt->sense, SCSI_SENSE_BUFFERSIZE);
}
}
/* Lock or unlock the drive door. Don't use when st_request allocated. */
static int do_door_lock(struct scsi_tape * STp, int do_lock)
{
- int retval, cmd;
+ int retval;
- cmd = do_lock ? SCSI_IOCTL_DOORLOCK : SCSI_IOCTL_DOORUNLOCK;
DEBC_printk(STp, "%socking drive door.\n", do_lock ? "L" : "Unl");
- retval = scsi_ioctl(STp->device, cmd, NULL);
- if (!retval) {
+
+ retval = scsi_set_medium_removal(STp->device,
+ do_lock ? SCSI_REMOVAL_PREVENT : SCSI_REMOVAL_ALLOW);
+ if (!retval)
STp->door_locked = do_lock ? ST_LOCKED_EXPLICIT : ST_UNLOCKED;
- }
- else {
+ else
STp->door_locked = ST_LOCK_FAILS;
- }
return retval;
}
* may try and take the device offline, in which case all further
* access to the device is prohibited.
*/
- retval = scsi_nonblockable_ioctl(STp->device, cmd_in, p,
- file->f_flags & O_NDELAY);
- if (!scsi_block_when_processing_errors(STp->device) || retval != -ENODEV)
+ retval = scsi_ioctl_block_when_processing_errors(STp->device, cmd_in,
+ file->f_flags & O_NDELAY);
+ if (retval)
goto out;
- retval = 0;
cmd_type = _IOC_TYPE(cmd_in);
cmd_nr = _IOC_NR(cmd_in);
printk(KERN_INFO "st: Version %s, fixed bufsize %d, s/g segs %d\n",
verstr, st_fixed_buffer_size, st_max_sg_segs);
+ debugging = (debug_flag > 0) ? debug_flag : NO_DEBUG;
+ if (debugging) {
+ printk(KERN_INFO "st: Debugging enabled debug_flag = %d\n",
+ debugging);
+ }
+
err = class_register(&st_sysfs_class);
if (err) {
pr_err("Unable register sysfs class for SCSI tapes\n");
readl(hba->mmio_base + YH2I_REQ); /* flush */
}
-static int
-stex_slave_alloc(struct scsi_device *sdev)
-{
- /* Cheat: usually extracted from Inquiry data */
- sdev->tagged_supported = 1;
-
- scsi_activate_tcq(sdev, sdev->host->can_queue);
-
- return 0;
-}
-
static int
stex_slave_config(struct scsi_device *sdev)
{
sdev->use_10_for_rw = 1;
sdev->use_10_for_ms = 1;
blk_queue_rq_timeout(sdev->request_queue, 60 * HZ);
- sdev->tagged_supported = 1;
return 0;
}
-static void
-stex_slave_destroy(struct scsi_device *sdev)
-{
- scsi_deactivate_tcq(sdev, 1);
-}
-
static int
stex_queuecommand_lck(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
{
int result = SUCCESS;
unsigned long flags;
- printk(KERN_INFO DRV_NAME
- "(%s): aborting command\n", pci_name(hba->pdev));
- scsi_print_command(cmd);
+ scmd_printk(KERN_INFO, cmd, "aborting command\n");
base = hba->mmio_base;
spin_lock_irqsave(host->host_lock, flags);
hba = (struct st_hba *) &cmd->device->host->hostdata[0];
- printk(KERN_INFO DRV_NAME
- "(%s): resetting host\n", pci_name(hba->pdev));
- scsi_print_command(cmd);
+ shost_printk(KERN_INFO, cmd->device->host,
+ "resetting host\n");
return stex_do_reset(hba) ? FAILED : SUCCESS;
}
.proc_name = DRV_NAME,
.bios_param = stex_biosparam,
.queuecommand = stex_queuecommand,
- .slave_alloc = stex_slave_alloc,
.slave_configure = stex_slave_config,
- .slave_destroy = stex_slave_destroy,
.eh_abort_handler = stex_abort,
.eh_host_reset_handler = stex_reset,
.this_id = -1,
+ .use_blk_tags = 1,
};
static struct pci_device_id stex_pci_tbl[] = {
if (scmnd->result) {
if (scsi_normalize_sense(scmnd->sense_buffer,
SCSI_SENSE_BUFFERSIZE, &sense_hdr))
- scsi_print_sense_hdr("storvsc", &sense_hdr);
+ scsi_print_sense_hdr(scmnd->device, "storvsc",
+ &sense_hdr);
}
if (vm_srb->srb_status != SRB_STATUS_SUCCESS)
static int storvsc_device_configure(struct scsi_device *sdevice)
{
- scsi_adjust_queue_depth(sdevice, MSG_SIMPLE_TAG,
- STORVSC_MAX_IO_REQUESTS);
+ scsi_change_queue_depth(sdevice, STORVSC_MAX_IO_REQUESTS);
blk_queue_max_segment_size(sdevice->request_queue, PAGE_SIZE);
+++ /dev/null
-/* sun3_NCR5380.c -- adapted from atari_NCR5380.c for the sun3 by
- Sam Creasey. */
-/*
- * NCR 5380 generic driver routines. These should make it *trivial*
- * to implement 5380 SCSI drivers under Linux with a non-trantor
- * architecture.
- *
- * Note that these routines also work with NR53c400 family chips.
- *
- * Copyright 1993, Drew Eckhardt
- * Visionary Computing
- * (Unix and Linux consulting and custom programming)
- * drew@colorado.edu
- * +1 (303) 666-5836
- *
- * DISTRIBUTION RELEASE 6.
- *
- * For more information, please consult
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
- */
-
-/*
- * ++roman: To port the 5380 driver to the Atari, I had to do some changes in
- * this file, too:
- *
- * - Some of the debug statements were incorrect (undefined variables and the
- * like). I fixed that.
- *
- * - In information_transfer(), I think a #ifdef was wrong. Looking at the
- * possible DMA transfer size should also happen for REAL_DMA. I added this
- * in the #if statement.
- *
- * - When using real DMA, information_transfer() should return in a DATAOUT
- * phase after starting the DMA. It has nothing more to do.
- *
- * - The interrupt service routine should run main after end of DMA, too (not
- * only after RESELECTION interrupts). Additionally, it should _not_ test
- * for more interrupts after running main, since a DMA process may have
- * been started and interrupts are turned on now. The new int could happen
- * inside the execution of NCR5380_intr(), leading to recursive
- * calls.
- *
- * - I've deleted all the stuff for AUTOPROBE_IRQ, REAL_DMA_POLL, PSEUDO_DMA
- * and USLEEP, because these were messing up readability and will never be
- * needed for Atari SCSI.
- *
- * - I've revised the NCR5380_main() calling scheme (relax the 'main_running'
- * stuff), and 'main' is executed in a bottom half if awoken by an
- * interrupt.
- *
- * - The code was quite cluttered up by "#if (NDEBUG & NDEBUG_*) printk..."
- * constructs. In my eyes, this made the source rather unreadable, so I
- * finally replaced that by the *_PRINTK() macros.
- *
- */
-#include <scsi/scsi_dbg.h>
-#include <scsi/scsi_transport_spi.h>
-
-/*
- * Further development / testing that should be done :
- * 1. Test linked command handling code after Eric is ready with
- * the high level code.
- */
-
-#if (NDEBUG & NDEBUG_LISTS)
-#define LIST(x,y) \
- { printk("LINE:%d Adding %p to %p\n", __LINE__, (void*)(x), (void*)(y)); \
- if ((x)==(y)) udelay(5); }
-#define REMOVE(w,x,y,z) \
- { printk("LINE:%d Removing: %p->%p %p->%p \n", __LINE__, \
- (void*)(w), (void*)(x), (void*)(y), (void*)(z)); \
- if ((x)==(y)) udelay(5); }
-#else
-#define LIST(x,y)
-#define REMOVE(w,x,y,z)
-#endif
-
-#ifndef notyet
-#undef LINKED
-#endif
-
-/*
- * Design
- * Issues :
- *
- * The other Linux SCSI drivers were written when Linux was Intel PC-only,
- * and specifically for each board rather than each chip. This makes their
- * adaptation to platforms like the Mac (Some of which use NCR5380's)
- * more difficult than it has to be.
- *
- * Also, many of the SCSI drivers were written before the command queuing
- * routines were implemented, meaning their implementations of queued
- * commands were hacked on rather than designed in from the start.
- *
- * When I designed the Linux SCSI drivers I figured that
- * while having two different SCSI boards in a system might be useful
- * for debugging things, two of the same type wouldn't be used.
- * Well, I was wrong and a number of users have mailed me about running
- * multiple high-performance SCSI boards in a server.
- *
- * Finally, when I get questions from users, I have no idea what
- * revision of my driver they are running.
- *
- * This driver attempts to address these problems :
- * This is a generic 5380 driver. To use it on a different platform,
- * one simply writes appropriate system specific macros (ie, data
- * transfer - some PC's will use the I/O bus, 68K's must use
- * memory mapped) and drops this file in their 'C' wrapper.
- *
- * As far as command queueing, two queues are maintained for
- * each 5380 in the system - commands that haven't been issued yet,
- * and commands that are currently executing. This means that an
- * unlimited number of commands may be queued, letting
- * more commands propagate from the higher driver levels giving higher
- * throughput. Note that both I_T_L and I_T_L_Q nexuses are supported,
- * allowing multiple commands to propagate all the way to a SCSI-II device
- * while a command is already executing.
- *
- * To solve the multiple-boards-in-the-same-system problem,
- * there is a separate instance structure for each instance
- * of a 5380 in the system. So, multiple NCR5380 drivers will
- * be able to coexist with appropriate changes to the high level
- * SCSI code.
- *
- * A NCR5380_PUBLIC_REVISION macro is provided, with the release
- * number (updated for each public release) printed by the
- * NCR5380_print_options command, which should be called from the
- * wrapper detect function, so that I know what release of the driver
- * users are using.
- *
- * Issues specific to the NCR5380 :
- *
- * When used in a PIO or pseudo-dma mode, the NCR5380 is a braindead
- * piece of hardware that requires you to sit in a loop polling for
- * the REQ signal as long as you are connected. Some devices are
- * brain dead (ie, many TEXEL CD ROM drives) and won't disconnect
- * while doing long seek operations.
- *
- * The workaround for this is to keep track of devices that have
- * disconnected. If the device hasn't disconnected, for commands that
- * should disconnect, we do something like
- *
- * while (!REQ is asserted) { sleep for N usecs; poll for M usecs }
- *
- * Some tweaking of N and M needs to be done. An algorithm based
- * on "time to data" would give the best results as long as short time
- * to datas (ie, on the same track) were considered, however these
- * broken devices are the exception rather than the rule and I'd rather
- * spend my time optimizing for the normal case.
- *
- * Architecture :
- *
- * At the heart of the design is a coroutine, NCR5380_main,
- * which is started when not running by the interrupt handler,
- * timer, and queue command function. It attempts to establish
- * I_T_L or I_T_L_Q nexuses by removing the commands from the
- * issue queue and calling NCR5380_select() if a nexus
- * is not established.
- *
- * Once a nexus is established, the NCR5380_information_transfer()
- * phase goes through the various phases as instructed by the target.
- * if the target goes into MSG IN and sends a DISCONNECT message,
- * the command structure is placed into the per instance disconnected
- * queue, and NCR5380_main tries to find more work. If USLEEP
- * was defined, and the target is idle for too long, the system
- * will try to sleep.
- *
- * If a command has disconnected, eventually an interrupt will trigger,
- * calling NCR5380_intr() which will in turn call NCR5380_reselect
- * to reestablish a nexus. This will run main if necessary.
- *
- * On command termination, the done function will be called as
- * appropriate.
- *
- * SCSI pointers are maintained in the SCp field of SCSI command
- * structures, being initialized after the command is connected
- * in NCR5380_select, and set as appropriate in NCR5380_information_transfer.
- * Note that in violation of the standard, an implicit SAVE POINTERS operation
- * is done, since some BROKEN disks fail to issue an explicit SAVE POINTERS.
- */
-
-/*
- * Using this file :
- * This file a skeleton Linux SCSI driver for the NCR 5380 series
- * of chips. To use it, you write an architecture specific functions
- * and macros and include this file in your driver.
- *
- * These macros control options :
- * AUTOSENSE - if defined, REQUEST SENSE will be performed automatically
- * for commands that return with a CHECK CONDITION status.
- *
- * LINKED - if defined, linked commands are supported.
- *
- * REAL_DMA - if defined, REAL DMA is used during the data transfer phases.
- *
- * SUPPORT_TAGS - if defined, SCSI-2 tagged queuing is used where possible
- *
- * These macros MUST be defined :
- *
- * NCR5380_read(register) - read from the specified register
- *
- * NCR5380_write(register, value) - write to the specific register
- *
- * Either real DMA *or* pseudo DMA may be implemented
- * REAL functions :
- * NCR5380_REAL_DMA should be defined if real DMA is to be used.
- * Note that the DMA setup functions should return the number of bytes
- * that they were able to program the controller for.
- *
- * Also note that generic i386/PC versions of these macros are
- * available as NCR5380_i386_dma_write_setup,
- * NCR5380_i386_dma_read_setup, and NCR5380_i386_dma_residual.
- *
- * NCR5380_dma_write_setup(instance, src, count) - initialize
- * NCR5380_dma_read_setup(instance, dst, count) - initialize
- * NCR5380_dma_residual(instance); - residual count
- *
- * PSEUDO functions :
- * NCR5380_pwrite(instance, src, count)
- * NCR5380_pread(instance, dst, count);
- *
- * If nothing specific to this implementation needs doing (ie, with external
- * hardware), you must also define
- *
- * NCR5380_queue_command
- * NCR5380_reset
- * NCR5380_abort
- * NCR5380_proc_info
- *
- * to be the global entry points into the specific driver, ie
- * #define NCR5380_queue_command t128_queue_command.
- *
- * If this is not done, the routines will be defined as static functions
- * with the NCR5380* names and the user must provide a globally
- * accessible wrapper function.
- *
- * The generic driver is initialized by calling NCR5380_init(instance),
- * after setting the appropriate host specific fields and ID. If the
- * driver wishes to autoprobe for an IRQ line, the NCR5380_probe_irq(instance,
- * possible) function may be used. Before the specific driver initialization
- * code finishes, NCR5380_print_options should be called.
- */
-
-static struct Scsi_Host *first_instance = NULL;
-static struct scsi_host_template *the_template = NULL;
-
-/* Macros ease life... :-) */
-#define SETUP_HOSTDATA(in) \
- struct NCR5380_hostdata *hostdata = \
- (struct NCR5380_hostdata *)(in)->hostdata
-#define HOSTDATA(in) ((struct NCR5380_hostdata *)(in)->hostdata)
-
-#define NEXT(cmd) ((struct scsi_cmnd *)(cmd)->host_scribble)
-#define SET_NEXT(cmd, next) ((cmd)->host_scribble = (void *)(next))
-#define NEXTADDR(cmd) ((struct scsi_cmnd **)&((cmd)->host_scribble))
-
-#define HOSTNO instance->host_no
-#define H_NO(cmd) (cmd)->device->host->host_no
-
-#define SGADDR(buffer) (void *)(((unsigned long)sg_virt(((buffer)))))
-
-#ifdef SUPPORT_TAGS
-
-/*
- * Functions for handling tagged queuing
- * =====================================
- *
- * ++roman (01/96): Now I've implemented SCSI-2 tagged queuing. Some notes:
- *
- * Using consecutive numbers for the tags is no good idea in my eyes. There
- * could be wrong re-usings if the counter (8 bit!) wraps and some early
- * command has been preempted for a long time. My solution: a bitfield for
- * remembering used tags.
- *
- * There's also the problem that each target has a certain queue size, but we
- * cannot know it in advance :-( We just see a QUEUE_FULL status being
- * returned. So, in this case, the driver internal queue size assumption is
- * reduced to the number of active tags if QUEUE_FULL is returned by the
- * target. The command is returned to the mid-level, but with status changed
- * to BUSY, since --as I've seen-- the mid-level can't handle QUEUE_FULL
- * correctly.
- *
- * We're also not allowed running tagged commands as long as an untagged
- * command is active. And REQUEST SENSE commands after a contingent allegiance
- * condition _must_ be untagged. To keep track whether an untagged command has
- * been issued, the host->busy array is still employed, as it is without
- * support for tagged queuing.
- *
- * One could suspect that there are possible race conditions between
- * is_lun_busy(), cmd_get_tag() and cmd_free_tag(). But I think this isn't the
- * case: is_lun_busy() and cmd_get_tag() are both called from NCR5380_main(),
- * which already guaranteed to be running at most once. It is also the only
- * place where tags/LUNs are allocated. So no other allocation can slip
- * between that pair, there could only happen a reselection, which can free a
- * tag, but that doesn't hurt. Only the sequence in cmd_free_tag() becomes
- * important: the tag bit must be cleared before 'nr_allocated' is decreased.
- */
-
-/* -1 for TAG_NONE is not possible with unsigned char cmd->tag */
-#undef TAG_NONE
-#define TAG_NONE 0xff
-
-/* For the m68k, the number of bits in 'allocated' must be a multiple of 32! */
-#if (MAX_TAGS % 32) != 0
-#error "MAX_TAGS must be a multiple of 32!"
-#endif
-
-typedef struct {
- char allocated[MAX_TAGS/8];
- int nr_allocated;
- int queue_size;
-} TAG_ALLOC;
-
-static TAG_ALLOC TagAlloc[8][8]; /* 8 targets and 8 LUNs */
-
-
-static void __init init_tags( void )
-{
- int target, lun;
- TAG_ALLOC *ta;
-
- if (!setup_use_tagged_queuing)
- return;
-
- for( target = 0; target < 8; ++target ) {
- for( lun = 0; lun < 8; ++lun ) {
- ta = &TagAlloc[target][lun];
- memset( &ta->allocated, 0, MAX_TAGS/8 );
- ta->nr_allocated = 0;
- /* At the beginning, assume the maximum queue size we could
- * support (MAX_TAGS). This value will be decreased if the target
- * returns QUEUE_FULL status.
- */
- ta->queue_size = MAX_TAGS;
- }
- }
-}
-
-
-/* Check if we can issue a command to this LUN: First see if the LUN is marked
- * busy by an untagged command. If the command should use tagged queuing, also
- * check that there is a free tag and the target's queue won't overflow. This
- * function should be called with interrupts disabled to avoid race
- * conditions.
- */
-
-static int is_lun_busy(struct scsi_cmnd *cmd, int should_be_tagged)
-{
- u8 lun = cmd->device->lun;
- SETUP_HOSTDATA(cmd->device->host);
-
- if (hostdata->busy[cmd->device->id] & (1 << lun))
- return( 1 );
- if (!should_be_tagged ||
- !setup_use_tagged_queuing || !cmd->device->tagged_supported)
- return( 0 );
- if (TagAlloc[cmd->device->id][lun].nr_allocated >=
- TagAlloc[cmd->device->id][lun].queue_size ) {
- dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d: no free tags\n",
- H_NO(cmd), cmd->device->id, lun );
- return( 1 );
- }
- return( 0 );
-}
-
-
-/* Allocate a tag for a command (there are no checks anymore, check_lun_busy()
- * must be called before!), or reserve the LUN in 'busy' if the command is
- * untagged.
- */
-
-static void cmd_get_tag(struct scsi_cmnd *cmd, int should_be_tagged)
-{
- u8 lun = cmd->device->lun;
- SETUP_HOSTDATA(cmd->device->host);
-
- /* If we or the target don't support tagged queuing, allocate the LUN for
- * an untagged command.
- */
- if (!should_be_tagged ||
- !setup_use_tagged_queuing || !cmd->device->tagged_supported) {
- cmd->tag = TAG_NONE;
- hostdata->busy[cmd->device->id] |= (1 << lun);
- dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d now allocated by untagged "
- "command\n", H_NO(cmd), cmd->device->id, lun );
- }
- else {
- TAG_ALLOC *ta = &TagAlloc[cmd->device->id][lun];
-
- cmd->tag = find_first_zero_bit( &ta->allocated, MAX_TAGS );
- set_bit( cmd->tag, &ta->allocated );
- ta->nr_allocated++;
- dprintk(NDEBUG_TAGS, "scsi%d: using tag %d for target %d lun %d "
- "(now %d tags in use)\n",
- H_NO(cmd), cmd->tag, cmd->device->id, lun,
- ta->nr_allocated );
- }
-}
-
-
-/* Mark the tag of command 'cmd' as free, or in case of an untagged command,
- * unlock the LUN.
- */
-
-static void cmd_free_tag(struct scsi_cmnd *cmd)
-{
- u8 lun = cmd->device->lun;
- SETUP_HOSTDATA(cmd->device->host);
-
- if (cmd->tag == TAG_NONE) {
- hostdata->busy[cmd->device->id] &= ~(1 << lun);
- dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %d untagged cmd finished\n",
- H_NO(cmd), cmd->device->id, lun );
- }
- else if (cmd->tag >= MAX_TAGS) {
- printk(KERN_NOTICE "scsi%d: trying to free bad tag %d!\n",
- H_NO(cmd), cmd->tag );
- }
- else {
- TAG_ALLOC *ta = &TagAlloc[cmd->device->id][lun];
- clear_bit( cmd->tag, &ta->allocated );
- ta->nr_allocated--;
- dprintk(NDEBUG_TAGS, "scsi%d: freed tag %d for target %d lun %d\n",
- H_NO(cmd), cmd->tag, cmd->device->id, lun );
- }
-}
-
-
-static void free_all_tags( void )
-{
- int target, lun;
- TAG_ALLOC *ta;
-
- if (!setup_use_tagged_queuing)
- return;
-
- for( target = 0; target < 8; ++target ) {
- for( lun = 0; lun < 8; ++lun ) {
- ta = &TagAlloc[target][lun];
- memset( &ta->allocated, 0, MAX_TAGS/8 );
- ta->nr_allocated = 0;
- }
- }
-}
-
-#endif /* SUPPORT_TAGS */
-
-
-/*
- * Function : void initialize_SCp(struct scsi_cmnd *cmd)
- *
- * Purpose : initialize the saved data pointers for cmd to point to the
- * start of the buffer.
- *
- * Inputs : cmd - struct scsi_cmnd structure to have pointers reset.
- */
-
-static __inline__ void initialize_SCp(struct scsi_cmnd *cmd)
-{
- /*
- * Initialize the Scsi Pointer field so that all of the commands in the
- * various queues are valid.
- */
-
- if (scsi_bufflen(cmd)) {
- cmd->SCp.buffer = scsi_sglist(cmd);
- cmd->SCp.buffers_residual = scsi_sg_count(cmd) - 1;
- cmd->SCp.ptr = (char *) SGADDR(cmd->SCp.buffer);
- cmd->SCp.this_residual = cmd->SCp.buffer->length;
- } else {
- cmd->SCp.buffer = NULL;
- cmd->SCp.buffers_residual = 0;
- cmd->SCp.ptr = NULL;
- cmd->SCp.this_residual = 0;
- }
-
-}
-
-#include <linux/delay.h>
-
-#if NDEBUG
-static struct {
- unsigned char mask;
- const char * name;}
-signals[] = {{ SR_DBP, "PARITY"}, { SR_RST, "RST" }, { SR_BSY, "BSY" },
- { SR_REQ, "REQ" }, { SR_MSG, "MSG" }, { SR_CD, "CD" }, { SR_IO, "IO" },
- { SR_SEL, "SEL" }, {0, NULL}},
-basrs[] = {{BASR_ATN, "ATN"}, {BASR_ACK, "ACK"}, {0, NULL}},
-icrs[] = {{ICR_ASSERT_RST, "ASSERT RST"},{ICR_ASSERT_ACK, "ASSERT ACK"},
- {ICR_ASSERT_BSY, "ASSERT BSY"}, {ICR_ASSERT_SEL, "ASSERT SEL"},
- {ICR_ASSERT_ATN, "ASSERT ATN"}, {ICR_ASSERT_DATA, "ASSERT DATA"},
- {0, NULL}},
-mrs[] = {{MR_BLOCK_DMA_MODE, "MODE BLOCK DMA"}, {MR_TARGET, "MODE TARGET"},
- {MR_ENABLE_PAR_CHECK, "MODE PARITY CHECK"}, {MR_ENABLE_PAR_INTR,
- "MODE PARITY INTR"}, {MR_ENABLE_EOP_INTR,"MODE EOP INTR"},
- {MR_MONITOR_BSY, "MODE MONITOR BSY"},
- {MR_DMA_MODE, "MODE DMA"}, {MR_ARBITRATE, "MODE ARBITRATION"},
- {0, NULL}};
-
-/*
- * Function : void NCR5380_print(struct Scsi_Host *instance)
- *
- * Purpose : print the SCSI bus signals for debugging purposes
- *
- * Input : instance - which NCR5380
- */
-
-static void NCR5380_print(struct Scsi_Host *instance) {
- unsigned char status, data, basr, mr, icr, i;
- unsigned long flags;
-
- local_irq_save(flags);
- data = NCR5380_read(CURRENT_SCSI_DATA_REG);
- status = NCR5380_read(STATUS_REG);
- mr = NCR5380_read(MODE_REG);
- icr = NCR5380_read(INITIATOR_COMMAND_REG);
- basr = NCR5380_read(BUS_AND_STATUS_REG);
- local_irq_restore(flags);
- printk("STATUS_REG: %02x ", status);
- for (i = 0; signals[i].mask ; ++i)
- if (status & signals[i].mask)
- printk(",%s", signals[i].name);
- printk("\nBASR: %02x ", basr);
- for (i = 0; basrs[i].mask ; ++i)
- if (basr & basrs[i].mask)
- printk(",%s", basrs[i].name);
- printk("\nICR: %02x ", icr);
- for (i = 0; icrs[i].mask; ++i)
- if (icr & icrs[i].mask)
- printk(",%s", icrs[i].name);
- printk("\nMODE: %02x ", mr);
- for (i = 0; mrs[i].mask; ++i)
- if (mr & mrs[i].mask)
- printk(",%s", mrs[i].name);
- printk("\n");
-}
-
-static struct {
- unsigned char value;
- const char *name;
-} phases[] = {
- {PHASE_DATAOUT, "DATAOUT"}, {PHASE_DATAIN, "DATAIN"}, {PHASE_CMDOUT, "CMDOUT"},
- {PHASE_STATIN, "STATIN"}, {PHASE_MSGOUT, "MSGOUT"}, {PHASE_MSGIN, "MSGIN"},
- {PHASE_UNKNOWN, "UNKNOWN"}};
-
-/*
- * Function : void NCR5380_print_phase(struct Scsi_Host *instance)
- *
- * Purpose : print the current SCSI phase for debugging purposes
- *
- * Input : instance - which NCR5380
- */
-
-static void NCR5380_print_phase(struct Scsi_Host *instance)
-{
- unsigned char status;
- int i;
-
- status = NCR5380_read(STATUS_REG);
- if (!(status & SR_REQ))
- printk(KERN_DEBUG "scsi%d: REQ not asserted, phase unknown.\n", HOSTNO);
- else {
- for (i = 0; (phases[i].value != PHASE_UNKNOWN) &&
- (phases[i].value != (status & PHASE_MASK)); ++i);
- printk(KERN_DEBUG "scsi%d: phase %s\n", HOSTNO, phases[i].name);
- }
-}
-
-#endif
-
-/*
- * ++roman: New scheme of calling NCR5380_main()
- *
- * If we're not in an interrupt, we can call our main directly, it cannot be
- * already running. Else, we queue it on a task queue, if not 'main_running'
- * tells us that a lower level is already executing it. This way,
- * 'main_running' needs not be protected in a special way.
- *
- * queue_main() is a utility function for putting our main onto the task
- * queue, if main_running is false. It should be called only from a
- * interrupt or bottom half.
- */
-
-#include <linux/gfp.h>
-#include <linux/workqueue.h>
-#include <linux/interrupt.h>
-
-static volatile int main_running = 0;
-static DECLARE_WORK(NCR5380_tqueue, NCR5380_main);
-
-static __inline__ void queue_main(void)
-{
- if (!main_running) {
- /* If in interrupt and NCR5380_main() not already running,
- queue it on the 'immediate' task queue, to be processed
- immediately after the current interrupt processing has
- finished. */
- schedule_work(&NCR5380_tqueue);
- }
- /* else: nothing to do: the running NCR5380_main() will pick up
- any newly queued command. */
-}
-
-
-static inline void NCR5380_all_init (void)
-{
- static int done = 0;
- if (!done) {
- dprintk(NDEBUG_INIT, "scsi : NCR5380_all_init()\n");
- done = 1;
- }
-}
-
-
-/*
- * Function : void NCR58380_print_options (struct Scsi_Host *instance)
- *
- * Purpose : called by probe code indicating the NCR5380 driver
- * options that were selected.
- *
- * Inputs : instance, pointer to this instance. Unused.
- */
-
-static void __init NCR5380_print_options (struct Scsi_Host *instance)
-{
- printk(" generic options"
-#ifdef AUTOSENSE
- " AUTOSENSE"
-#endif
-#ifdef REAL_DMA
- " REAL DMA"
-#endif
-#ifdef PARITY
- " PARITY"
-#endif
-#ifdef SUPPORT_TAGS
- " SCSI-2 TAGGED QUEUING"
-#endif
- );
- printk(" generic release=%d", NCR5380_PUBLIC_RELEASE);
-}
-
-/*
- * Function : void NCR5380_print_status (struct Scsi_Host *instance)
- *
- * Purpose : print commands in the various queues, called from
- * NCR5380_abort and NCR5380_debug to aid debugging.
- *
- * Inputs : instance, pointer to this instance.
- */
-
-static void lprint_Scsi_Cmnd(Scsi_Cmnd *cmd)
-{
- int i, s;
- unsigned char *command;
- printk("scsi%d: destination target %d, lun %llu\n",
- H_NO(cmd), cmd->device->id, cmd->device->lun);
- printk(KERN_CONT " command = ");
- command = cmd->cmnd;
- printk(KERN_CONT "%2d (0x%02x)", command[0], command[0]);
- for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i)
- printk(KERN_CONT " %02x", command[i]);
- printk("\n");
-}
-
-static void NCR5380_print_status(struct Scsi_Host *instance)
-{
- struct NCR5380_hostdata *hostdata;
- Scsi_Cmnd *ptr;
- unsigned long flags;
-
- NCR5380_dprint(NDEBUG_ANY, instance);
- NCR5380_dprint_phase(NDEBUG_ANY, instance);
-
- hostdata = (struct NCR5380_hostdata *)instance->hostdata;
-
- printk("\nNCR5380 core release=%d.\n", NCR5380_PUBLIC_RELEASE);
- local_irq_save(flags);
- printk("NCR5380: coroutine is%s running.\n",
- main_running ? "" : "n't");
- if (!hostdata->connected)
- printk("scsi%d: no currently connected command\n", HOSTNO);
- else
- lprint_Scsi_Cmnd((Scsi_Cmnd *) hostdata->connected);
- printk("scsi%d: issue_queue\n", HOSTNO);
- for (ptr = (Scsi_Cmnd *)hostdata->issue_queue; ptr; ptr = NEXT(ptr))
- lprint_Scsi_Cmnd(ptr);
-
- printk("scsi%d: disconnected_queue\n", HOSTNO);
- for (ptr = (Scsi_Cmnd *) hostdata->disconnected_queue; ptr;
- ptr = NEXT(ptr))
- lprint_Scsi_Cmnd(ptr);
-
- local_irq_restore(flags);
- printk("\n");
-}
-
-static void show_Scsi_Cmnd(Scsi_Cmnd *cmd, struct seq_file *m)
-{
- int i, s;
- unsigned char *command;
- seq_printf(m, "scsi%d: destination target %d, lun %llu\n",
- H_NO(cmd), cmd->device->id, cmd->device->lun);
- seq_printf(m, " command = ");
- command = cmd->cmnd;
- seq_printf(m, "%2d (0x%02x)", command[0], command[0]);
- for (i = 1, s = COMMAND_SIZE(command[0]); i < s; ++i)
- seq_printf(m, " %02x", command[i]);
- seq_printf(m, "\n");
-}
-
-static int NCR5380_show_info(struct seq_file *m, struct Scsi_Host *instance)
-{
- struct NCR5380_hostdata *hostdata;
- Scsi_Cmnd *ptr;
- unsigned long flags;
-
- hostdata = (struct NCR5380_hostdata *)instance->hostdata;
-
- seq_printf(m, "NCR5380 core release=%d.\n", NCR5380_PUBLIC_RELEASE);
- local_irq_save(flags);
- seq_printf(m, "NCR5380: coroutine is%s running.\n",
- main_running ? "" : "n't");
- if (!hostdata->connected)
- seq_printf(m, "scsi%d: no currently connected command\n", HOSTNO);
- else
- show_Scsi_Cmnd((Scsi_Cmnd *) hostdata->connected, m);
- seq_printf(m, "scsi%d: issue_queue\n", HOSTNO);
- for (ptr = (Scsi_Cmnd *)hostdata->issue_queue; ptr; ptr = NEXT(ptr))
- show_Scsi_Cmnd(ptr, m);
-
- seq_printf(m, "scsi%d: disconnected_queue\n", HOSTNO);
- for (ptr = (Scsi_Cmnd *) hostdata->disconnected_queue; ptr;
- ptr = NEXT(ptr))
- show_Scsi_Cmnd(ptr, m);
-
- local_irq_restore(flags);
- return 0;
-}
-
-/*
- * Function : void NCR5380_init (struct Scsi_Host *instance)
- *
- * Purpose : initializes *instance and corresponding 5380 chip.
- *
- * Inputs : instance - instantiation of the 5380 driver.
- *
- * Notes : I assume that the host, hostno, and id bits have been
- * set correctly. I don't care about the irq and other fields.
- *
- */
-
-static int __init NCR5380_init(struct Scsi_Host *instance, int flags)
-{
- int i;
- SETUP_HOSTDATA(instance);
-
- NCR5380_all_init();
-
- hostdata->aborted = 0;
- hostdata->id_mask = 1 << instance->this_id;
- hostdata->id_higher_mask = 0;
- for (i = hostdata->id_mask; i <= 0x80; i <<= 1)
- if (i > hostdata->id_mask)
- hostdata->id_higher_mask |= i;
- for (i = 0; i < 8; ++i)
- hostdata->busy[i] = 0;
-#ifdef SUPPORT_TAGS
- init_tags();
-#endif
-#if defined (REAL_DMA)
- hostdata->dma_len = 0;
-#endif
- hostdata->targets_present = 0;
- hostdata->connected = NULL;
- hostdata->issue_queue = NULL;
- hostdata->disconnected_queue = NULL;
- hostdata->flags = FLAG_CHECK_LAST_BYTE_SENT;
-
- if (!the_template) {
- the_template = instance->hostt;
- first_instance = instance;
- }
-
-
-#ifndef AUTOSENSE
- if ((instance->cmd_per_lun > 1) || (instance->can_queue > 1))
- printk("scsi%d: WARNING : support for multiple outstanding commands enabled\n"
- " without AUTOSENSE option, contingent allegiance conditions may\n"
- " be incorrectly cleared.\n", HOSTNO);
-#endif /* def AUTOSENSE */
-
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- NCR5380_write(MODE_REG, MR_BASE);
- NCR5380_write(TARGET_COMMAND_REG, 0);
- NCR5380_write(SELECT_ENABLE_REG, 0);
-
- return 0;
-}
-
-static void NCR5380_exit(struct Scsi_Host *instance)
-{
- /* Empty, as we didn't schedule any delayed work */
-}
-
-/*
- * Function : int NCR5380_queue_command (struct scsi_cmnd *cmd,
- * void (*done)(struct scsi_cmnd *))
- *
- * Purpose : enqueues a SCSI command
- *
- * Inputs : cmd - SCSI command, done - function called on completion, with
- * a pointer to the command descriptor.
- *
- * Returns : 0
- *
- * Side effects :
- * cmd is added to the per instance issue_queue, with minor
- * twiddling done to the host specific fields of cmd. If the
- * main coroutine is not running, it is restarted.
- *
- */
-
-/* Only make static if a wrapper function is used */
-static int NCR5380_queue_command_lck(struct scsi_cmnd *cmd,
- void (*done)(struct scsi_cmnd *))
-{
- SETUP_HOSTDATA(cmd->device->host);
- struct scsi_cmnd *tmp;
- unsigned long flags;
-
-#if (NDEBUG & NDEBUG_NO_WRITE)
- switch (cmd->cmnd[0]) {
- case WRITE_6:
- case WRITE_10:
- printk(KERN_NOTICE "scsi%d: WRITE attempted with NO_WRITE debugging flag set\n",
- H_NO(cmd));
- cmd->result = (DID_ERROR << 16);
- done(cmd);
- return 0;
- }
-#endif /* (NDEBUG & NDEBUG_NO_WRITE) */
-
-
-#ifdef NCR5380_STATS
-# if 0
- if (!hostdata->connected && !hostdata->issue_queue &&
- !hostdata->disconnected_queue) {
- hostdata->timebase = jiffies;
- }
-# endif
-# ifdef NCR5380_STAT_LIMIT
- if (scsi_bufflen(cmd) > NCR5380_STAT_LIMIT)
-# endif
- switch (cmd->cmnd[0])
- {
- case WRITE:
- case WRITE_6:
- case WRITE_10:
- hostdata->time_write[cmd->device->id] -= (jiffies - hostdata->timebase);
- hostdata->bytes_write[cmd->device->id] += scsi_bufflen(cmd);
- hostdata->pendingw++;
- break;
- case READ:
- case READ_6:
- case READ_10:
- hostdata->time_read[cmd->device->id] -= (jiffies - hostdata->timebase);
- hostdata->bytes_read[cmd->device->id] += scsi_bufflen(cmd);
- hostdata->pendingr++;
- break;
- }
-#endif
-
- /*
- * We use the host_scribble field as a pointer to the next command
- * in a queue
- */
-
- SET_NEXT(cmd, NULL);
- cmd->scsi_done = done;
-
- cmd->result = 0;
-
-
- /*
- * Insert the cmd into the issue queue. Note that REQUEST SENSE
- * commands are added to the head of the queue since any command will
- * clear the contingent allegiance condition that exists and the
- * sense data is only guaranteed to be valid while the condition exists.
- */
-
- local_irq_save(flags);
- /* ++guenther: now that the issue queue is being set up, we can lock ST-DMA.
- * Otherwise a running NCR5380_main may steal the lock.
- * Lock before actually inserting due to fairness reasons explained in
- * atari_scsi.c. If we insert first, then it's impossible for this driver
- * to release the lock.
- * Stop timer for this command while waiting for the lock, or timeouts
- * may happen (and they really do), and it's no good if the command doesn't
- * appear in any of the queues.
- * ++roman: Just disabling the NCR interrupt isn't sufficient here,
- * because also a timer int can trigger an abort or reset, which would
- * alter queues and touch the lock.
- */
- if (!(hostdata->issue_queue) || (cmd->cmnd[0] == REQUEST_SENSE)) {
- LIST(cmd, hostdata->issue_queue);
- SET_NEXT(cmd, hostdata->issue_queue);
- hostdata->issue_queue = cmd;
- } else {
- for (tmp = (struct scsi_cmnd *)hostdata->issue_queue;
- NEXT(tmp); tmp = NEXT(tmp))
- ;
- LIST(cmd, tmp);
- SET_NEXT(tmp, cmd);
- }
-
- local_irq_restore(flags);
-
- dprintk(NDEBUG_QUEUES, "scsi%d: command added to %s of queue\n", H_NO(cmd),
- (cmd->cmnd[0] == REQUEST_SENSE) ? "head" : "tail");
-
- /* If queue_command() is called from an interrupt (real one or bottom
- * half), we let queue_main() do the job of taking care about main. If it
- * is already running, this is a no-op, else main will be queued.
- *
- * If we're not in an interrupt, we can call NCR5380_main()
- * unconditionally, because it cannot be already running.
- */
- if (in_interrupt() || ((flags >> 8) & 7) >= 6)
- queue_main();
- else
- NCR5380_main(NULL);
- return 0;
-}
-
-static DEF_SCSI_QCMD(NCR5380_queue_command)
-
-/*
- * Function : NCR5380_main (void)
- *
- * Purpose : NCR5380_main is a coroutine that runs as long as more work can
- * be done on the NCR5380 host adapters in a system. Both
- * NCR5380_queue_command() and NCR5380_intr() will try to start it
- * in case it is not running.
- *
- * NOTE : NCR5380_main exits with interrupts *disabled*, the caller should
- * reenable them. This prevents reentrancy and kernel stack overflow.
- */
-
-static void NCR5380_main (struct work_struct *bl)
-{
- struct scsi_cmnd *tmp, *prev;
- struct Scsi_Host *instance = first_instance;
- struct NCR5380_hostdata *hostdata = HOSTDATA(instance);
- int done;
- unsigned long flags;
-
- /*
- * We run (with interrupts disabled) until we're sure that none of
- * the host adapters have anything that can be done, at which point
- * we set main_running to 0 and exit.
- *
- * Interrupts are enabled before doing various other internal
- * instructions, after we've decided that we need to run through
- * the loop again.
- *
- * this should prevent any race conditions.
- *
- * ++roman: Just disabling the NCR interrupt isn't sufficient here,
- * because also a timer int can trigger an abort or reset, which can
- * alter queues and touch the Falcon lock.
- */
-
- /* Tell int handlers main() is now already executing. Note that
- no races are possible here. If an int comes in before
- 'main_running' is set here, and queues/executes main via the
- task queue, it doesn't do any harm, just this instance of main
- won't find any work left to do. */
- if (main_running)
- return;
- main_running = 1;
-
- local_save_flags(flags);
- do {
- local_irq_disable(); /* Freeze request queues */
- done = 1;
-
- if (!hostdata->connected) {
- dprintk(NDEBUG_MAIN, "scsi%d: not connected\n", HOSTNO );
- /*
- * Search through the issue_queue for a command destined
- * for a target that's not busy.
- */
-#if (NDEBUG & NDEBUG_LISTS)
- for (tmp = (struct scsi_cmnd *) hostdata->issue_queue, prev = NULL;
- tmp && (tmp != prev); prev = tmp, tmp = NEXT(tmp))
- ;
- if ((tmp == prev) && tmp) printk(" LOOP\n");/* else printk("\n");*/
-#endif
- for (tmp = (struct scsi_cmnd *) hostdata->issue_queue,
- prev = NULL; tmp; prev = tmp, tmp = NEXT(tmp) ) {
-
- if (prev != tmp)
- dprintk(NDEBUG_LISTS, "MAIN tmp=%p target=%d busy=%d lun=%llu\n", tmp, tmp->device->id, hostdata->busy[tmp->device->id], tmp->device->lun);
- /* When we find one, remove it from the issue queue. */
- /* ++guenther: possible race with Falcon locking */
- if (
-#ifdef SUPPORT_TAGS
- !is_lun_busy( tmp, tmp->cmnd[0] != REQUEST_SENSE)
-#else
- !(hostdata->busy[tmp->device->id] & (1 << tmp->device->lun))
-#endif
- ) {
- /* ++guenther: just to be sure, this must be atomic */
- local_irq_disable();
- if (prev) {
- REMOVE(prev, NEXT(prev), tmp, NEXT(tmp));
- SET_NEXT(prev, NEXT(tmp));
- } else {
- REMOVE(-1, hostdata->issue_queue, tmp, NEXT(tmp));
- hostdata->issue_queue = NEXT(tmp);
- }
- SET_NEXT(tmp, NULL);
-
- /* reenable interrupts after finding one */
- local_irq_restore(flags);
-
- /*
- * Attempt to establish an I_T_L nexus here.
- * On success, instance->hostdata->connected is set.
- * On failure, we must add the command back to the
- * issue queue so we can keep trying.
- */
- dprintk(NDEBUG_MAIN, "scsi%d: main(): command for target %d "
- "lun %llu removed from issue_queue\n",
- HOSTNO, tmp->device->id, tmp->device->lun);
- /*
- * REQUEST SENSE commands are issued without tagged
- * queueing, even on SCSI-II devices because the
- * contingent allegiance condition exists for the
- * entire unit.
- */
- /* ++roman: ...and the standard also requires that
- * REQUEST SENSE command are untagged.
- */
-
-#ifdef SUPPORT_TAGS
- cmd_get_tag( tmp, tmp->cmnd[0] != REQUEST_SENSE );
-#endif
- if (!NCR5380_select(instance, tmp,
- (tmp->cmnd[0] == REQUEST_SENSE) ? TAG_NONE :
- TAG_NEXT)) {
- break;
- } else {
- local_irq_disable();
- LIST(tmp, hostdata->issue_queue);
- SET_NEXT(tmp, hostdata->issue_queue);
- hostdata->issue_queue = tmp;
-#ifdef SUPPORT_TAGS
- cmd_free_tag( tmp );
-#endif
- local_irq_restore(flags);
- dprintk(NDEBUG_MAIN, "scsi%d: main(): select() failed, "
- "returned to issue_queue\n", HOSTNO);
- if (hostdata->connected)
- break;
- }
- } /* if target/lun/target queue is not busy */
- } /* for issue_queue */
- } /* if (!hostdata->connected) */
- if (hostdata->connected
-#ifdef REAL_DMA
- && !hostdata->dma_len
-#endif
- ) {
- local_irq_restore(flags);
- dprintk(NDEBUG_MAIN, "scsi%d: main: performing information transfer\n",
- HOSTNO);
- NCR5380_information_transfer(instance);
- dprintk(NDEBUG_MAIN, "scsi%d: main: done set false\n", HOSTNO);
- done = 0;
- }
- } while (!done);
-
- /* Better allow ints _after_ 'main_running' has been cleared, else
- an interrupt could believe we'll pick up the work it left for
- us, but we won't see it anymore here... */
- main_running = 0;
- local_irq_restore(flags);
-}
-
-
-#ifdef REAL_DMA
-/*
- * Function : void NCR5380_dma_complete (struct Scsi_Host *instance)
- *
- * Purpose : Called by interrupt handler when DMA finishes or a phase
- * mismatch occurs (which would finish the DMA transfer).
- *
- * Inputs : instance - this instance of the NCR5380.
- *
- */
-
-static void NCR5380_dma_complete( struct Scsi_Host *instance )
-{
- SETUP_HOSTDATA(instance);
- int transfered;
- unsigned char **data;
- volatile int *count;
-
- if (!hostdata->connected) {
- printk(KERN_WARNING "scsi%d: received end of DMA interrupt with "
- "no connected cmd\n", HOSTNO);
- return;
- }
-
- dprintk(NDEBUG_DMA, "scsi%d: real DMA transfer complete, basr 0x%X, sr 0x%X\n",
- HOSTNO, NCR5380_read(BUS_AND_STATUS_REG),
- NCR5380_read(STATUS_REG));
-
- if((sun3scsi_dma_finish(rq_data_dir(hostdata->connected->request)))) {
- printk("scsi%d: overrun in UDC counter -- not prepared to deal with this!\n", HOSTNO);
- printk("please e-mail sammy@sammy.net with a description of how this\n");
- printk("error was produced.\n");
- BUG();
- }
-
- /* make sure we're not stuck in a data phase */
- if((NCR5380_read(BUS_AND_STATUS_REG) & (BASR_PHASE_MATCH |
- BASR_ACK)) ==
- (BASR_PHASE_MATCH | BASR_ACK)) {
- printk("scsi%d: BASR %02x\n", HOSTNO, NCR5380_read(BUS_AND_STATUS_REG));
- printk("scsi%d: bus stuck in data phase -- probably a single byte "
- "overrun!\n", HOSTNO);
- printk("not prepared for this error!\n");
- printk("please e-mail sammy@sammy.net with a description of how this\n");
- printk("error was produced.\n");
- BUG();
- }
-
-
-
- (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- NCR5380_write(MODE_REG, MR_BASE);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-
- transfered = hostdata->dma_len - NCR5380_dma_residual(instance);
- hostdata->dma_len = 0;
-
- data = (unsigned char **) &(hostdata->connected->SCp.ptr);
- count = &(hostdata->connected->SCp.this_residual);
- *data += transfered;
- *count -= transfered;
-
-}
-#endif /* REAL_DMA */
-
-
-/*
- * Function : void NCR5380_intr (int irq)
- *
- * Purpose : handle interrupts, reestablishing I_T_L or I_T_L_Q nexuses
- * from the disconnected queue, and restarting NCR5380_main()
- * as required.
- *
- * Inputs : int irq, irq that caused this interrupt.
- *
- */
-
-static irqreturn_t NCR5380_intr (int irq, void *dev_id)
-{
- struct Scsi_Host *instance = first_instance;
- int done = 1, handled = 0;
- unsigned char basr;
-
- dprintk(NDEBUG_INTR, "scsi%d: NCR5380 irq triggered\n", HOSTNO);
-
- /* Look for pending interrupts */
- basr = NCR5380_read(BUS_AND_STATUS_REG);
- dprintk(NDEBUG_INTR, "scsi%d: BASR=%02x\n", HOSTNO, basr);
- /* dispatch to appropriate routine if found and done=0 */
- if (basr & BASR_IRQ) {
- NCR5380_dprint(NDEBUG_INTR, instance);
- if ((NCR5380_read(STATUS_REG) & (SR_SEL|SR_IO)) == (SR_SEL|SR_IO)) {
- done = 0;
-// ENABLE_IRQ();
- dprintk(NDEBUG_INTR, "scsi%d: SEL interrupt\n", HOSTNO);
- NCR5380_reselect(instance);
- (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- }
- else if (basr & BASR_PARITY_ERROR) {
- dprintk(NDEBUG_INTR, "scsi%d: PARITY interrupt\n", HOSTNO);
- (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- }
- else if ((NCR5380_read(STATUS_REG) & SR_RST) == SR_RST) {
- dprintk(NDEBUG_INTR, "scsi%d: RESET interrupt\n", HOSTNO);
- (void)NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- }
- else {
- /*
- * The rest of the interrupt conditions can occur only during a
- * DMA transfer
- */
-
-#if defined(REAL_DMA)
- /*
- * We should only get PHASE MISMATCH and EOP interrupts if we have
- * DMA enabled, so do a sanity check based on the current setting
- * of the MODE register.
- */
-
- if ((NCR5380_read(MODE_REG) & MR_DMA_MODE) &&
- ((basr & BASR_END_DMA_TRANSFER) ||
- !(basr & BASR_PHASE_MATCH))) {
-
- dprintk(NDEBUG_INTR, "scsi%d: PHASE MISM or EOP interrupt\n", HOSTNO);
- NCR5380_dma_complete( instance );
- done = 0;
-// ENABLE_IRQ();
- } else
-#endif /* REAL_DMA */
- {
-/* MS: Ignore unknown phase mismatch interrupts (caused by EOP interrupt) */
- if (basr & BASR_PHASE_MATCH)
- dprintk(NDEBUG_INTR, "scsi%d: unknown interrupt, "
- "BASR 0x%x, MR 0x%x, SR 0x%x\n",
- HOSTNO, basr, NCR5380_read(MODE_REG),
- NCR5380_read(STATUS_REG));
- (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG);
-#ifdef SUN3_SCSI_VME
- dregs->csr |= CSR_DMA_ENABLE;
-#endif
- }
- } /* if !(SELECTION || PARITY) */
- handled = 1;
- } /* BASR & IRQ */
- else {
-
- printk(KERN_NOTICE "scsi%d: interrupt without IRQ bit set in BASR, "
- "BASR 0x%X, MR 0x%X, SR 0x%x\n", HOSTNO, basr,
- NCR5380_read(MODE_REG), NCR5380_read(STATUS_REG));
- (void) NCR5380_read(RESET_PARITY_INTERRUPT_REG);
-#ifdef SUN3_SCSI_VME
- dregs->csr |= CSR_DMA_ENABLE;
-#endif
- }
-
- if (!done) {
- dprintk(NDEBUG_INTR, "scsi%d: in int routine, calling main\n", HOSTNO);
- /* Put a call to NCR5380_main() on the queue... */
- queue_main();
- }
- return IRQ_RETVAL(handled);
-}
-
-#ifdef NCR5380_STATS
-static void collect_stats(struct NCR5380_hostdata *hostdata,
- struct scsi_cmnd *cmd)
-{
-# ifdef NCR5380_STAT_LIMIT
- if (scsi_bufflen(cmd) > NCR5380_STAT_LIMIT)
-# endif
- switch (cmd->cmnd[0])
- {
- case WRITE:
- case WRITE_6:
- case WRITE_10:
- hostdata->time_write[cmd->device->id] += (jiffies - hostdata->timebase);
- /*hostdata->bytes_write[cmd->device->id] += scsi_bufflen(cmd);*/
- hostdata->pendingw--;
- break;
- case READ:
- case READ_6:
- case READ_10:
- hostdata->time_read[cmd->device->id] += (jiffies - hostdata->timebase);
- /*hostdata->bytes_read[cmd->device->id] += scsi_bufflen(cmd);*/
- hostdata->pendingr--;
- break;
- }
-}
-#endif
-
-/*
- * Function : int NCR5380_select(struct Scsi_Host *instance,
- * struct scsi_cmnd *cmd, int tag);
- *
- * Purpose : establishes I_T_L or I_T_L_Q nexus for new or existing command,
- * including ARBITRATION, SELECTION, and initial message out for
- * IDENTIFY and queue messages.
- *
- * Inputs : instance - instantiation of the 5380 driver on which this
- * target lives, cmd - SCSI command to execute, tag - set to TAG_NEXT for
- * new tag, TAG_NONE for untagged queueing, otherwise set to the tag for
- * the command that is presently connected.
- *
- * Returns : -1 if selection could not execute for some reason,
- * 0 if selection succeeded or failed because the target
- * did not respond.
- *
- * Side effects :
- * If bus busy, arbitration failed, etc, NCR5380_select() will exit
- * with registers as they should have been on entry - ie
- * SELECT_ENABLE will be set appropriately, the NCR5380
- * will cease to drive any SCSI bus signals.
- *
- * If successful : I_T_L or I_T_L_Q nexus will be established,
- * instance->connected will be set to cmd.
- * SELECT interrupt will be disabled.
- *
- * If failed (no target) : cmd->scsi_done() will be called, and the
- * cmd->result host byte set to DID_BAD_TARGET.
- */
-
-static int NCR5380_select(struct Scsi_Host *instance, struct scsi_cmnd *cmd,
- int tag)
-{
- SETUP_HOSTDATA(instance);
- unsigned char tmp[3], phase;
- unsigned char *data;
- int len;
- unsigned long timeout;
- unsigned long flags;
-
- hostdata->restart_select = 0;
- NCR5380_dprint(NDEBUG_ARBITRATION, instance);
- dprintk(NDEBUG_ARBITRATION, "scsi%d: starting arbitration, id = %d\n", HOSTNO,
- instance->this_id);
-
- /*
- * Set the phase bits to 0, otherwise the NCR5380 won't drive the
- * data bus during SELECTION.
- */
-
- local_irq_save(flags);
- if (hostdata->connected) {
- local_irq_restore(flags);
- return -1;
- }
- NCR5380_write(TARGET_COMMAND_REG, 0);
-
-
- /*
- * Start arbitration.
- */
-
- NCR5380_write(OUTPUT_DATA_REG, hostdata->id_mask);
- NCR5380_write(MODE_REG, MR_ARBITRATE);
-
- local_irq_restore(flags);
-
- /* Wait for arbitration logic to complete */
-#ifdef NCR_TIMEOUT
- {
- unsigned long timeout = jiffies + 2*NCR_TIMEOUT;
-
- while (!(NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_PROGRESS)
- && time_before(jiffies, timeout) && !hostdata->connected)
- ;
- if (time_after_eq(jiffies, timeout))
- {
- printk("scsi : arbitration timeout at %d\n", __LINE__);
- NCR5380_write(MODE_REG, MR_BASE);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- return -1;
- }
- }
-#else /* NCR_TIMEOUT */
- while (!(NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_PROGRESS)
- && !hostdata->connected);
-#endif
-
- dprintk(NDEBUG_ARBITRATION, "scsi%d: arbitration complete\n", HOSTNO);
-
- if (hostdata->connected) {
- NCR5380_write(MODE_REG, MR_BASE);
- return -1;
- }
- /*
- * The arbitration delay is 2.2us, but this is a minimum and there is
- * no maximum so we can safely sleep for ceil(2.2) usecs to accommodate
- * the integral nature of udelay().
- *
- */
-
- udelay(3);
-
- /* Check for lost arbitration */
- if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) ||
- (NCR5380_read(CURRENT_SCSI_DATA_REG) & hostdata->id_higher_mask) ||
- (NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) ||
- hostdata->connected) {
- NCR5380_write(MODE_REG, MR_BASE);
- dprintk(NDEBUG_ARBITRATION, "scsi%d: lost arbitration, deasserting MR_ARBITRATE\n",
- HOSTNO);
- return -1;
- }
-
- /* after/during arbitration, BSY should be asserted.
- IBM DPES-31080 Version S31Q works now */
- /* Tnx to Thomas_Roesch@m2.maus.de for finding this! (Roman) */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_SEL |
- ICR_ASSERT_BSY ) ;
-
- if ((NCR5380_read(INITIATOR_COMMAND_REG) & ICR_ARBITRATION_LOST) ||
- hostdata->connected) {
- NCR5380_write(MODE_REG, MR_BASE);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- dprintk(NDEBUG_ARBITRATION, "scsi%d: lost arbitration, deasserting ICR_ASSERT_SEL\n",
- HOSTNO);
- return -1;
- }
-
- /*
- * Again, bus clear + bus settle time is 1.2us, however, this is
- * a minimum so we'll udelay ceil(1.2)
- */
-
-#ifdef CONFIG_ATARI_SCSI_TOSHIBA_DELAY
- /* ++roman: But some targets (see above :-) seem to need a bit more... */
- udelay(15);
-#else
- udelay(2);
-#endif
-
- if (hostdata->connected) {
- NCR5380_write(MODE_REG, MR_BASE);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- return -1;
- }
-
- dprintk(NDEBUG_ARBITRATION, "scsi%d: won arbitration\n", HOSTNO);
-
- /*
- * Now that we have won arbitration, start Selection process, asserting
- * the host and target ID's on the SCSI bus.
- */
-
- NCR5380_write(OUTPUT_DATA_REG, (hostdata->id_mask | (1 << cmd->device->id)));
-
- /*
- * Raise ATN while SEL is true before BSY goes false from arbitration,
- * since this is the only way to guarantee that we'll get a MESSAGE OUT
- * phase immediately after selection.
- */
-
- NCR5380_write(INITIATOR_COMMAND_REG, (ICR_BASE | ICR_ASSERT_BSY |
- ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_SEL ));
- NCR5380_write(MODE_REG, MR_BASE);
-
- /*
- * Reselect interrupts must be turned off prior to the dropping of BSY,
- * otherwise we will trigger an interrupt.
- */
-
- if (hostdata->connected) {
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- return -1;
- }
-
- NCR5380_write(SELECT_ENABLE_REG, 0);
-
- /*
- * The initiator shall then wait at least two deskew delays and release
- * the BSY signal.
- */
- udelay(1); /* wingel -- wait two bus deskew delay >2*45ns */
-
- /* Reset BSY */
- NCR5380_write(INITIATOR_COMMAND_REG, (ICR_BASE | ICR_ASSERT_DATA |
- ICR_ASSERT_ATN | ICR_ASSERT_SEL));
-
- /*
- * Something weird happens when we cease to drive BSY - looks
- * like the board/chip is letting us do another read before the
- * appropriate propagation delay has expired, and we're confusing
- * a BSY signal from ourselves as the target's response to SELECTION.
- *
- * A small delay (the 'C++' frontend breaks the pipeline with an
- * unnecessary jump, making it work on my 386-33/Trantor T128, the
- * tighter 'C' code breaks and requires this) solves the problem -
- * the 1 us delay is arbitrary, and only used because this delay will
- * be the same on other platforms and since it works here, it should
- * work there.
- *
- * wingel suggests that this could be due to failing to wait
- * one deskew delay.
- */
-
- udelay(1);
-
- dprintk(NDEBUG_SELECTION, "scsi%d: selecting target %d\n", HOSTNO, cmd->device->id);
-
- /*
- * The SCSI specification calls for a 250 ms timeout for the actual
- * selection.
- */
-
- timeout = jiffies + 25;
-
- /*
- * XXX very interesting - we're seeing a bounce where the BSY we
- * asserted is being reflected / still asserted (propagation delay?)
- * and it's detecting as true. Sigh.
- */
-
-#if 0
- /* ++roman: If a target conformed to the SCSI standard, it wouldn't assert
- * IO while SEL is true. But again, there are some disks out the in the
- * world that do that nevertheless. (Somebody claimed that this announces
- * reselection capability of the target.) So we better skip that test and
- * only wait for BSY... (Famous german words: Der Klügere gibt nach :-)
- */
-
- while (time_before(jiffies, timeout) && !(NCR5380_read(STATUS_REG) &
- (SR_BSY | SR_IO)));
-
- if ((NCR5380_read(STATUS_REG) & (SR_SEL | SR_IO)) ==
- (SR_SEL | SR_IO)) {
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- NCR5380_reselect(instance);
- printk (KERN_ERR "scsi%d: reselection after won arbitration?\n",
- HOSTNO);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- return -1;
- }
-#else
- while (time_before(jiffies, timeout) && !(NCR5380_read(STATUS_REG) & SR_BSY));
-#endif
-
- /*
- * No less than two deskew delays after the initiator detects the
- * BSY signal is true, it shall release the SEL signal and may
- * change the DATA BUS. -wingel
- */
-
- udelay(1);
-
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
-
- if (!(NCR5380_read(STATUS_REG) & SR_BSY)) {
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- if (hostdata->targets_present & (1 << cmd->device->id)) {
- printk(KERN_ERR "scsi%d: weirdness\n", HOSTNO);
- if (hostdata->restart_select)
- printk(KERN_NOTICE "\trestart select\n");
- NCR5380_dprint(NDEBUG_ANY, instance);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- return -1;
- }
- cmd->result = DID_BAD_TARGET << 16;
-#ifdef NCR5380_STATS
- collect_stats(hostdata, cmd);
-#endif
-#ifdef SUPPORT_TAGS
- cmd_free_tag( cmd );
-#endif
- cmd->scsi_done(cmd);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- dprintk(NDEBUG_SELECTION, "scsi%d: target did not respond within 250ms\n", HOSTNO);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- return 0;
- }
-
- hostdata->targets_present |= (1 << cmd->device->id);
-
- /*
- * Since we followed the SCSI spec, and raised ATN while SEL
- * was true but before BSY was false during selection, the information
- * transfer phase should be a MESSAGE OUT phase so that we can send the
- * IDENTIFY message.
- *
- * If SCSI-II tagged queuing is enabled, we also send a SIMPLE_QUEUE_TAG
- * message (2 bytes) with a tag ID that we increment with every command
- * until it wraps back to 0.
- *
- * XXX - it turns out that there are some broken SCSI-II devices,
- * which claim to support tagged queuing but fail when more than
- * some number of commands are issued at once.
- */
-
- /* Wait for start of REQ/ACK handshake */
- while (!(NCR5380_read(STATUS_REG) & SR_REQ));
-
- dprintk(NDEBUG_SELECTION, "scsi%d: target %d selected, going into MESSAGE OUT phase.\n",
- HOSTNO, cmd->device->id);
- tmp[0] = IDENTIFY(1, cmd->device->lun);
-
-#ifdef SUPPORT_TAGS
- if (cmd->tag != TAG_NONE) {
- tmp[1] = hostdata->last_message = SIMPLE_QUEUE_TAG;
- tmp[2] = cmd->tag;
- len = 3;
- } else
- len = 1;
-#else
- len = 1;
- cmd->tag=0;
-#endif /* SUPPORT_TAGS */
-
- /* Send message(s) */
- data = tmp;
- phase = PHASE_MSGOUT;
- NCR5380_transfer_pio(instance, &phase, &len, &data);
- dprintk(NDEBUG_SELECTION, "scsi%d: nexus established.\n", HOSTNO);
- /* XXX need to handle errors here */
- hostdata->connected = cmd;
-#ifndef SUPPORT_TAGS
- hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun);
-#endif
-#ifdef SUN3_SCSI_VME
- dregs->csr |= CSR_INTR;
-#endif
- initialize_SCp(cmd);
-
-
- return 0;
-}
-
-/*
- * Function : int NCR5380_transfer_pio (struct Scsi_Host *instance,
- * unsigned char *phase, int *count, unsigned char **data)
- *
- * Purpose : transfers data in given phase using polled I/O
- *
- * Inputs : instance - instance of driver, *phase - pointer to
- * what phase is expected, *count - pointer to number of
- * bytes to transfer, **data - pointer to data pointer.
- *
- * Returns : -1 when different phase is entered without transferring
- * maximum number of bytes, 0 if all bytes are transferred or exit
- * is in same phase.
- *
- * Also, *phase, *count, *data are modified in place.
- *
- * XXX Note : handling for bus free may be useful.
- */
-
-/*
- * Note : this code is not as quick as it could be, however it
- * IS 100% reliable, and for the actual data transfer where speed
- * counts, we will always do a pseudo DMA or DMA transfer.
- */
-
-static int NCR5380_transfer_pio( struct Scsi_Host *instance,
- unsigned char *phase, int *count,
- unsigned char **data)
-{
- register unsigned char p = *phase, tmp;
- register int c = *count;
- register unsigned char *d = *data;
-
- /*
- * The NCR5380 chip will only drive the SCSI bus when the
- * phase specified in the appropriate bits of the TARGET COMMAND
- * REGISTER match the STATUS REGISTER
- */
-
- NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(p));
-
- do {
- /*
- * Wait for assertion of REQ, after which the phase bits will be
- * valid
- */
- while (!((tmp = NCR5380_read(STATUS_REG)) & SR_REQ));
-
- dprintk(NDEBUG_HANDSHAKE, "scsi%d: REQ detected\n", HOSTNO);
-
- /* Check for phase mismatch */
- if ((tmp & PHASE_MASK) != p) {
- dprintk(NDEBUG_PIO, "scsi%d: phase mismatch\n", HOSTNO);
- NCR5380_dprint_phase(NDEBUG_PIO, instance);
- break;
- }
-
- /* Do actual transfer from SCSI bus to / from memory */
- if (!(p & SR_IO))
- NCR5380_write(OUTPUT_DATA_REG, *d);
- else
- *d = NCR5380_read(CURRENT_SCSI_DATA_REG);
-
- ++d;
-
- /*
- * The SCSI standard suggests that in MSGOUT phase, the initiator
- * should drop ATN on the last byte of the message phase
- * after REQ has been asserted for the handshake but before
- * the initiator raises ACK.
- */
-
- if (!(p & SR_IO)) {
- if (!((p & SR_MSG) && c > 1)) {
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
- ICR_ASSERT_DATA);
- NCR5380_dprint(NDEBUG_PIO, instance);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
- ICR_ASSERT_DATA | ICR_ASSERT_ACK);
- } else {
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
- ICR_ASSERT_DATA | ICR_ASSERT_ATN);
- NCR5380_dprint(NDEBUG_PIO, instance);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
- ICR_ASSERT_DATA | ICR_ASSERT_ATN | ICR_ASSERT_ACK);
- }
- } else {
- NCR5380_dprint(NDEBUG_PIO, instance);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ACK);
- }
-
- while (NCR5380_read(STATUS_REG) & SR_REQ);
-
- dprintk(NDEBUG_HANDSHAKE, "scsi%d: req false, handshake complete\n", HOSTNO);
-
-/*
- * We have several special cases to consider during REQ/ACK handshaking :
- * 1. We were in MSGOUT phase, and we are on the last byte of the
- * message. ATN must be dropped as ACK is dropped.
- *
- * 2. We are in a MSGIN phase, and we are on the last byte of the
- * message. We must exit with ACK asserted, so that the calling
- * code may raise ATN before dropping ACK to reject the message.
- *
- * 3. ACK and ATN are clear and the target may proceed as normal.
- */
- if (!(p == PHASE_MSGIN && c == 1)) {
- if (p == PHASE_MSGOUT && c > 1)
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
- else
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- }
- } while (--c);
-
- dprintk(NDEBUG_PIO, "scsi%d: residual %d\n", HOSTNO, c);
-
- *count = c;
- *data = d;
- tmp = NCR5380_read(STATUS_REG);
- /* The phase read from the bus is valid if either REQ is (already)
- * asserted or if ACK hasn't been released yet. The latter is the case if
- * we're in MSGIN and all wanted bytes have been received. */
- if ((tmp & SR_REQ) || (p == PHASE_MSGIN && c == 0))
- *phase = tmp & PHASE_MASK;
- else
- *phase = PHASE_UNKNOWN;
-
- if (!c || (*phase == p))
- return 0;
- else
- return -1;
-}
-
-/*
- * Function : do_abort (Scsi_Host *host)
- *
- * Purpose : abort the currently established nexus. Should only be
- * called from a routine which can drop into a
- *
- * Returns : 0 on success, -1 on failure.
- */
-
-static int do_abort (struct Scsi_Host *host)
-{
- unsigned char tmp, *msgptr, phase;
- int len;
-
- /* Request message out phase */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
-
- /*
- * Wait for the target to indicate a valid phase by asserting
- * REQ. Once this happens, we'll have either a MSGOUT phase
- * and can immediately send the ABORT message, or we'll have some
- * other phase and will have to source/sink data.
- *
- * We really don't care what value was on the bus or what value
- * the target sees, so we just handshake.
- */
-
- while (!((tmp = NCR5380_read(STATUS_REG)) & SR_REQ));
-
- NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp));
-
- if ((tmp & PHASE_MASK) != PHASE_MSGOUT) {
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN |
- ICR_ASSERT_ACK);
- while (NCR5380_read(STATUS_REG) & SR_REQ);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN);
- }
-
- tmp = ABORT;
- msgptr = &tmp;
- len = 1;
- phase = PHASE_MSGOUT;
- NCR5380_transfer_pio (host, &phase, &len, &msgptr);
-
- /*
- * If we got here, and the command completed successfully,
- * we're about to go into bus free state.
- */
-
- return len ? -1 : 0;
-}
-
-#if defined(REAL_DMA)
-/*
- * Function : int NCR5380_transfer_dma (struct Scsi_Host *instance,
- * unsigned char *phase, int *count, unsigned char **data)
- *
- * Purpose : transfers data in given phase using either real
- * or pseudo DMA.
- *
- * Inputs : instance - instance of driver, *phase - pointer to
- * what phase is expected, *count - pointer to number of
- * bytes to transfer, **data - pointer to data pointer.
- *
- * Returns : -1 when different phase is entered without transferring
- * maximum number of bytes, 0 if all bytes or transferred or exit
- * is in same phase.
- *
- * Also, *phase, *count, *data are modified in place.
- *
- */
-
-
-static int NCR5380_transfer_dma( struct Scsi_Host *instance,
- unsigned char *phase, int *count,
- unsigned char **data)
-{
- SETUP_HOSTDATA(instance);
- register int c = *count;
- register unsigned char p = *phase;
- unsigned long flags;
-
- /* sanity check */
- if(!sun3_dma_setup_done) {
- printk("scsi%d: transfer_dma without setup!\n", HOSTNO);
- BUG();
- }
- hostdata->dma_len = c;
-
- dprintk(NDEBUG_DMA, "scsi%d: initializing DMA for %s, %d bytes %s %p\n",
- HOSTNO, (p & SR_IO) ? "reading" : "writing",
- c, (p & SR_IO) ? "to" : "from", *data);
-
- /* netbsd turns off ints here, why not be safe and do it too */
- local_irq_save(flags);
-
- /* send start chain */
- sun3scsi_dma_start(c, *data);
-
- if (p & SR_IO) {
- NCR5380_write(TARGET_COMMAND_REG, 1);
- NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- NCR5380_write(INITIATOR_COMMAND_REG, 0);
- NCR5380_write(MODE_REG, (NCR5380_read(MODE_REG) | MR_DMA_MODE | MR_ENABLE_EOP_INTR));
- NCR5380_write(START_DMA_INITIATOR_RECEIVE_REG, 0);
- } else {
- NCR5380_write(TARGET_COMMAND_REG, 0);
- NCR5380_read(RESET_PARITY_INTERRUPT_REG);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_ASSERT_DATA);
- NCR5380_write(MODE_REG, (NCR5380_read(MODE_REG) | MR_DMA_MODE | MR_ENABLE_EOP_INTR));
- NCR5380_write(START_DMA_SEND_REG, 0);
- }
-
-#ifdef SUN3_SCSI_VME
- dregs->csr |= CSR_DMA_ENABLE;
-#endif
-
- local_irq_restore(flags);
-
- sun3_dma_active = 1;
- return 0;
-}
-#endif /* defined(REAL_DMA) */
-
-/*
- * Function : NCR5380_information_transfer (struct Scsi_Host *instance)
- *
- * Purpose : run through the various SCSI phases and do as the target
- * directs us to. Operates on the currently connected command,
- * instance->connected.
- *
- * Inputs : instance, instance for which we are doing commands
- *
- * Side effects : SCSI things happen, the disconnected queue will be
- * modified if a command disconnects, *instance->connected will
- * change.
- *
- * XXX Note : we need to watch for bus free or a reset condition here
- * to recover from an unexpected bus free condition.
- */
-
-static void NCR5380_information_transfer (struct Scsi_Host *instance)
-{
- SETUP_HOSTDATA(instance);
- unsigned long flags;
- unsigned char msgout = NOP;
- int sink = 0;
- int len;
-#if defined(REAL_DMA)
- int transfersize;
-#endif
- unsigned char *data;
- unsigned char phase, tmp, extended_msg[10], old_phase=0xff;
- struct scsi_cmnd *cmd = (struct scsi_cmnd *) hostdata->connected;
-
-#ifdef SUN3_SCSI_VME
- dregs->csr |= CSR_INTR;
-#endif
-
- while (1) {
- tmp = NCR5380_read(STATUS_REG);
- /* We only have a valid SCSI phase when REQ is asserted */
- if (tmp & SR_REQ) {
- phase = (tmp & PHASE_MASK);
- if (phase != old_phase) {
- old_phase = phase;
- NCR5380_dprint_phase(NDEBUG_INFORMATION, instance);
- }
-
- if(phase == PHASE_CMDOUT) {
- void *d;
- unsigned long count;
-
- if (!cmd->SCp.this_residual && cmd->SCp.buffers_residual) {
- count = cmd->SCp.buffer->length;
- d = SGADDR(cmd->SCp.buffer);
- } else {
- count = cmd->SCp.this_residual;
- d = cmd->SCp.ptr;
- }
-#ifdef REAL_DMA
- /* this command setup for dma yet? */
- if((count > SUN3_DMA_MINSIZE) && (sun3_dma_setup_done
- != cmd))
- {
- if (cmd->request->cmd_type == REQ_TYPE_FS) {
- sun3scsi_dma_setup(d, count,
- rq_data_dir(cmd->request));
- sun3_dma_setup_done = cmd;
- }
- }
-#endif
-#ifdef SUN3_SCSI_VME
- dregs->csr |= CSR_INTR;
-#endif
- }
-
-
- if (sink && (phase != PHASE_MSGOUT)) {
- NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(tmp));
-
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ATN |
- ICR_ASSERT_ACK);
- while (NCR5380_read(STATUS_REG) & SR_REQ);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
- ICR_ASSERT_ATN);
- sink = 0;
- continue;
- }
-
- switch (phase) {
- case PHASE_DATAOUT:
-#if (NDEBUG & NDEBUG_NO_DATAOUT)
- printk("scsi%d: NDEBUG_NO_DATAOUT set, attempted DATAOUT "
- "aborted\n", HOSTNO);
- sink = 1;
- do_abort(instance);
- cmd->result = DID_ERROR << 16;
- cmd->scsi_done(cmd);
- return;
-#endif
- case PHASE_DATAIN:
- /*
- * If there is no room left in the current buffer in the
- * scatter-gather list, move onto the next one.
- */
- if (!cmd->SCp.this_residual && cmd->SCp.buffers_residual) {
- ++cmd->SCp.buffer;
- --cmd->SCp.buffers_residual;
- cmd->SCp.this_residual = cmd->SCp.buffer->length;
- cmd->SCp.ptr = SGADDR(cmd->SCp.buffer);
- dprintk(NDEBUG_INFORMATION, "scsi%d: %d bytes and %d buffers left\n",
- HOSTNO, cmd->SCp.this_residual,
- cmd->SCp.buffers_residual);
- }
-
- /*
- * The preferred transfer method is going to be
- * PSEUDO-DMA for systems that are strictly PIO,
- * since we can let the hardware do the handshaking.
- *
- * For this to work, we need to know the transfersize
- * ahead of time, since the pseudo-DMA code will sit
- * in an unconditional loop.
- */
-
-/* ++roman: I suggest, this should be
- * #if def(REAL_DMA)
- * instead of leaving REAL_DMA out.
- */
-
-#if defined(REAL_DMA)
-// if (!cmd->device->borken &&
- if((transfersize =
- NCR5380_dma_xfer_len(instance,cmd,phase)) > SUN3_DMA_MINSIZE) {
- len = transfersize;
- cmd->SCp.phase = phase;
-
- if (NCR5380_transfer_dma(instance, &phase,
- &len, (unsigned char **) &cmd->SCp.ptr)) {
- /*
- * If the watchdog timer fires, all future
- * accesses to this device will use the
- * polled-IO. */
- printk(KERN_NOTICE "scsi%d: switching target %d "
- "lun %llu to slow handshake\n", HOSTNO,
- cmd->device->id, cmd->device->lun);
- cmd->device->borken = 1;
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
- ICR_ASSERT_ATN);
- sink = 1;
- do_abort(instance);
- cmd->result = DID_ERROR << 16;
- cmd->scsi_done(cmd);
- /* XXX - need to source or sink data here, as appropriate */
- } else {
-#ifdef REAL_DMA
- /* ++roman: When using real DMA,
- * information_transfer() should return after
- * starting DMA since it has nothing more to
- * do.
- */
- return;
-#else
- cmd->SCp.this_residual -= transfersize - len;
-#endif
- }
- } else
-#endif /* defined(REAL_DMA) */
- NCR5380_transfer_pio(instance, &phase,
- (int *) &cmd->SCp.this_residual, (unsigned char **)
- &cmd->SCp.ptr);
-#ifdef REAL_DMA
- /* if we had intended to dma that command clear it */
- if(sun3_dma_setup_done == cmd)
- sun3_dma_setup_done = NULL;
-#endif
-
- break;
- case PHASE_MSGIN:
- len = 1;
- data = &tmp;
- NCR5380_write(SELECT_ENABLE_REG, 0); /* disable reselects */
- NCR5380_transfer_pio(instance, &phase, &len, &data);
- cmd->SCp.Message = tmp;
-
- switch (tmp) {
- /*
- * Linking lets us reduce the time required to get the
- * next command out to the device, hopefully this will
- * mean we don't waste another revolution due to the delays
- * required by ARBITRATION and another SELECTION.
- *
- * In the current implementation proposal, low level drivers
- * merely have to start the next command, pointed to by
- * next_link, done() is called as with unlinked commands.
- */
-#ifdef LINKED
- case LINKED_CMD_COMPLETE:
- case LINKED_FLG_CMD_COMPLETE:
- /* Accept message by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-
- dprintk(NDEBUG_LINKED, "scsi%d: target %d lun %llu linked command "
- "complete.\n", HOSTNO, cmd->device->id, cmd->device->lun);
-
- /* Enable reselect interrupts */
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- /*
- * Sanity check : A linked command should only terminate
- * with one of these messages if there are more linked
- * commands available.
- */
-
- if (!cmd->next_link) {
- printk(KERN_NOTICE "scsi%d: target %d lun %llu "
- "linked command complete, no next_link\n",
- HOSTNO, cmd->device->id, cmd->device->lun);
- sink = 1;
- do_abort (instance);
- return;
- }
-
- initialize_SCp(cmd->next_link);
- /* The next command is still part of this process; copy it
- * and don't free it! */
- cmd->next_link->tag = cmd->tag;
- cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8);
- dprintk(NDEBUG_LINKED, "scsi%d: target %d lun %llu linked request "
- "done, calling scsi_done().\n",
- HOSTNO, cmd->device->id, cmd->device->lun);
-#ifdef NCR5380_STATS
- collect_stats(hostdata, cmd);
-#endif
- cmd->scsi_done(cmd);
- cmd = hostdata->connected;
- break;
-#endif /* def LINKED */
- case ABORT:
- case COMMAND_COMPLETE:
- /* Accept message by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- hostdata->connected = NULL;
- dprintk(NDEBUG_QUEUES, "scsi%d: command for target %d, lun %llu "
- "completed\n", HOSTNO, cmd->device->id, cmd->device->lun);
-#ifdef SUPPORT_TAGS
- cmd_free_tag( cmd );
- if (status_byte(cmd->SCp.Status) == QUEUE_FULL) {
- /* Turn a QUEUE FULL status into BUSY, I think the
- * mid level cannot handle QUEUE FULL :-( (The
- * command is retried after BUSY). Also update our
- * queue size to the number of currently issued
- * commands now.
- */
- /* ++Andreas: the mid level code knows about
- QUEUE_FULL now. */
- TAG_ALLOC *ta = &TagAlloc[cmd->device->id][cmd->device->lun];
- dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %llu returned "
- "QUEUE_FULL after %d commands\n",
- HOSTNO, cmd->device->id, cmd->device->lun,
- ta->nr_allocated);
- if (ta->queue_size > ta->nr_allocated)
- ta->nr_allocated = ta->queue_size;
- }
-#else
- hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
-#endif
- /* Enable reselect interrupts */
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
-
- /*
- * I'm not sure what the correct thing to do here is :
- *
- * If the command that just executed is NOT a request
- * sense, the obvious thing to do is to set the result
- * code to the values of the stored parameters.
- *
- * If it was a REQUEST SENSE command, we need some way to
- * differentiate between the failure code of the original
- * and the failure code of the REQUEST sense - the obvious
- * case is success, where we fall through and leave the
- * result code unchanged.
- *
- * The non-obvious place is where the REQUEST SENSE failed
- */
-
- if (cmd->cmnd[0] != REQUEST_SENSE)
- cmd->result = cmd->SCp.Status | (cmd->SCp.Message << 8);
- else if (status_byte(cmd->SCp.Status) != GOOD)
- cmd->result = (cmd->result & 0x00ffff) | (DID_ERROR << 16);
-
-#ifdef AUTOSENSE
- if ((cmd->cmnd[0] == REQUEST_SENSE) &&
- hostdata->ses.cmd_len) {
- scsi_eh_restore_cmnd(cmd, &hostdata->ses);
- hostdata->ses.cmd_len = 0 ;
- }
-
- if ((cmd->cmnd[0] != REQUEST_SENSE) &&
- (status_byte(cmd->SCp.Status) == CHECK_CONDITION)) {
- scsi_eh_prep_cmnd(cmd, &hostdata->ses, NULL, 0, ~0);
- dprintk(NDEBUG_AUTOSENSE, "scsi%d: performing request sense\n",
- HOSTNO);
- /* this is initialized from initialize_SCp
- cmd->SCp.buffer = NULL;
- cmd->SCp.buffers_residual = 0;
- */
-
- local_irq_save(flags);
- LIST(cmd,hostdata->issue_queue);
- SET_NEXT(cmd, hostdata->issue_queue);
- hostdata->issue_queue = (struct scsi_cmnd *) cmd;
- local_irq_restore(flags);
- dprintk(NDEBUG_QUEUES, "scsi%d: REQUEST SENSE added to head of "
- "issue queue\n", H_NO(cmd));
- } else
-#endif /* def AUTOSENSE */
- {
-#ifdef NCR5380_STATS
- collect_stats(hostdata, cmd);
-#endif
- cmd->scsi_done(cmd);
- }
-
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- /*
- * Restore phase bits to 0 so an interrupted selection,
- * arbitration can resume.
- */
- NCR5380_write(TARGET_COMMAND_REG, 0);
-
- while ((NCR5380_read(STATUS_REG) & SR_BSY) && !hostdata->connected)
- barrier();
-
- return;
- case MESSAGE_REJECT:
- /* Accept message by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- /* Enable reselect interrupts */
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- switch (hostdata->last_message) {
- case HEAD_OF_QUEUE_TAG:
- case ORDERED_QUEUE_TAG:
- case SIMPLE_QUEUE_TAG:
- /* The target obviously doesn't support tagged
- * queuing, even though it announced this ability in
- * its INQUIRY data ?!? (maybe only this LUN?) Ok,
- * clear 'tagged_supported' and lock the LUN, since
- * the command is treated as untagged further on.
- */
- cmd->device->tagged_supported = 0;
- hostdata->busy[cmd->device->id] |= (1 << cmd->device->lun);
- cmd->tag = TAG_NONE;
- dprintk(NDEBUG_TAGS, "scsi%d: target %d lun %llu rejected "
- "QUEUE_TAG message; tagged queuing "
- "disabled\n",
- HOSTNO, cmd->device->id, cmd->device->lun);
- break;
- }
- break;
- case DISCONNECT:
- /* Accept message by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- local_irq_save(flags);
- cmd->device->disconnect = 1;
- LIST(cmd,hostdata->disconnected_queue);
- SET_NEXT(cmd, hostdata->disconnected_queue);
- hostdata->connected = NULL;
- hostdata->disconnected_queue = cmd;
- local_irq_restore(flags);
- dprintk(NDEBUG_QUEUES, "scsi%d: command for target %d lun %llu was "
- "moved from connected to the "
- "disconnected_queue\n", HOSTNO,
- cmd->device->id, cmd->device->lun);
- /*
- * Restore phase bits to 0 so an interrupted selection,
- * arbitration can resume.
- */
- NCR5380_write(TARGET_COMMAND_REG, 0);
-
- /* Enable reselect interrupts */
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- /* Wait for bus free to avoid nasty timeouts */
- while ((NCR5380_read(STATUS_REG) & SR_BSY) && !hostdata->connected)
- barrier();
-#ifdef SUN3_SCSI_VME
- dregs->csr |= CSR_DMA_ENABLE;
-#endif
- return;
- /*
- * The SCSI data pointer is *IMPLICITLY* saved on a disconnect
- * operation, in violation of the SCSI spec so we can safely
- * ignore SAVE/RESTORE pointers calls.
- *
- * Unfortunately, some disks violate the SCSI spec and
- * don't issue the required SAVE_POINTERS message before
- * disconnecting, and we have to break spec to remain
- * compatible.
- */
- case SAVE_POINTERS:
- case RESTORE_POINTERS:
- /* Accept message by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- /* Enable reselect interrupts */
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- break;
- case EXTENDED_MESSAGE:
-/*
- * Extended messages are sent in the following format :
- * Byte
- * 0 EXTENDED_MESSAGE == 1
- * 1 length (includes one byte for code, doesn't
- * include first two bytes)
- * 2 code
- * 3..length+1 arguments
- *
- * Start the extended message buffer with the EXTENDED_MESSAGE
- * byte, since spi_print_msg() wants the whole thing.
- */
- extended_msg[0] = EXTENDED_MESSAGE;
- /* Accept first byte by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-
- dprintk(NDEBUG_EXTENDED, "scsi%d: receiving extended message\n", HOSTNO);
-
- len = 2;
- data = extended_msg + 1;
- phase = PHASE_MSGIN;
- NCR5380_transfer_pio(instance, &phase, &len, &data);
- dprintk(NDEBUG_EXTENDED, "scsi%d: length=%d, code=0x%02x\n", HOSTNO,
- (int)extended_msg[1], (int)extended_msg[2]);
-
- if (!len && extended_msg[1] <=
- (sizeof (extended_msg) - 1)) {
- /* Accept third byte by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
- len = extended_msg[1] - 1;
- data = extended_msg + 3;
- phase = PHASE_MSGIN;
-
- NCR5380_transfer_pio(instance, &phase, &len, &data);
- dprintk(NDEBUG_EXTENDED, "scsi%d: message received, residual %d\n",
- HOSTNO, len);
-
- switch (extended_msg[2]) {
- case EXTENDED_SDTR:
- case EXTENDED_WDTR:
- case EXTENDED_MODIFY_DATA_POINTER:
- case EXTENDED_EXTENDED_IDENTIFY:
- tmp = 0;
- }
- } else if (len) {
- printk(KERN_NOTICE "scsi%d: error receiving "
- "extended message\n", HOSTNO);
- tmp = 0;
- } else {
- printk(KERN_NOTICE "scsi%d: extended message "
- "code %02x length %d is too long\n",
- HOSTNO, extended_msg[2], extended_msg[1]);
- tmp = 0;
- }
- /* Fall through to reject message */
-
- /*
- * If we get something weird that we aren't expecting,
- * reject it.
- */
- default:
- if (!tmp) {
- printk(KERN_DEBUG "scsi%d: rejecting message ", HOSTNO);
- spi_print_msg(extended_msg);
- printk("\n");
- } else if (tmp != EXTENDED_MESSAGE)
- printk(KERN_DEBUG "scsi%d: rejecting unknown "
- "message %02x from target %d, lun %llu\n",
- HOSTNO, tmp, cmd->device->id, cmd->device->lun);
- else
- printk(KERN_DEBUG "scsi%d: rejecting unknown "
- "extended message "
- "code %02x, length %d from target %d, lun %llu\n",
- HOSTNO, extended_msg[1], extended_msg[0],
- cmd->device->id, cmd->device->lun);
-
-
- msgout = MESSAGE_REJECT;
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE |
- ICR_ASSERT_ATN);
- break;
- } /* switch (tmp) */
- break;
- case PHASE_MSGOUT:
- len = 1;
- data = &msgout;
- hostdata->last_message = msgout;
- NCR5380_transfer_pio(instance, &phase, &len, &data);
- if (msgout == ABORT) {
-#ifdef SUPPORT_TAGS
- cmd_free_tag( cmd );
-#else
- hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
-#endif
- hostdata->connected = NULL;
- cmd->result = DID_ERROR << 16;
-#ifdef NCR5380_STATS
- collect_stats(hostdata, cmd);
-#endif
- cmd->scsi_done(cmd);
- NCR5380_write(SELECT_ENABLE_REG, hostdata->id_mask);
- return;
- }
- msgout = NOP;
- break;
- case PHASE_CMDOUT:
- len = cmd->cmd_len;
- data = cmd->cmnd;
- /*
- * XXX for performance reasons, on machines with a
- * PSEUDO-DMA architecture we should probably
- * use the dma transfer function.
- */
- NCR5380_transfer_pio(instance, &phase, &len,
- &data);
- break;
- case PHASE_STATIN:
- len = 1;
- data = &tmp;
- NCR5380_transfer_pio(instance, &phase, &len, &data);
- cmd->SCp.Status = tmp;
- break;
- default:
- printk("scsi%d: unknown phase\n", HOSTNO);
- NCR5380_dprint(NDEBUG_ANY, instance);
- } /* switch(phase) */
- } /* if (tmp * SR_REQ) */
- } /* while (1) */
-}
-
-/*
- * Function : void NCR5380_reselect (struct Scsi_Host *instance)
- *
- * Purpose : does reselection, initializing the instance->connected
- * field to point to the struct scsi_cmnd for which the I_T_L or I_T_L_Q
- * nexus has been reestablished,
- *
- * Inputs : instance - this instance of the NCR5380.
- *
- */
-
-/* it might eventually prove necessary to do a dma setup on
- reselection, but it doesn't seem to be needed now -- sam */
-
-static void NCR5380_reselect (struct Scsi_Host *instance)
-{
- SETUP_HOSTDATA(instance);
- unsigned char target_mask;
- unsigned char lun;
-#ifdef SUPPORT_TAGS
- unsigned char tag;
-#endif
- unsigned char msg[3];
- struct scsi_cmnd *tmp = NULL, *prev;
-/* unsigned long flags; */
-
- /*
- * Disable arbitration, etc. since the host adapter obviously
- * lost, and tell an interrupted NCR5380_select() to restart.
- */
-
- NCR5380_write(MODE_REG, MR_BASE);
- hostdata->restart_select = 1;
-
- target_mask = NCR5380_read(CURRENT_SCSI_DATA_REG) & ~(hostdata->id_mask);
-
- dprintk(NDEBUG_RESELECTION, "scsi%d: reselect\n", HOSTNO);
-
- /*
- * At this point, we have detected that our SCSI ID is on the bus,
- * SEL is true and BSY was false for at least one bus settle delay
- * (400 ns).
- *
- * We must assert BSY ourselves, until the target drops the SEL
- * signal.
- */
-
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_BSY);
-
- while (NCR5380_read(STATUS_REG) & SR_SEL);
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-
- /*
- * Wait for target to go into MSGIN.
- */
-
- while (!(NCR5380_read(STATUS_REG) & SR_REQ));
-
-#if 1
- // acknowledge toggle to MSGIN
- NCR5380_write(TARGET_COMMAND_REG, PHASE_SR_TO_TCR(PHASE_MSGIN));
-
- // peek at the byte without really hitting the bus
- msg[0] = NCR5380_read(CURRENT_SCSI_DATA_REG);
-#endif
-
- if (!(msg[0] & 0x80)) {
- printk(KERN_DEBUG "scsi%d: expecting IDENTIFY message, got ", HOSTNO);
- spi_print_msg(msg);
- do_abort(instance);
- return;
- }
- lun = (msg[0] & 0x07);
-
- /*
- * Find the command corresponding to the I_T_L or I_T_L_Q nexus we
- * just reestablished, and remove it from the disconnected queue.
- */
-
- for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue, prev = NULL;
- tmp; prev = tmp, tmp = NEXT(tmp) ) {
- if ((target_mask == (1 << tmp->device->id)) && (lun == tmp->device->lun)
-#ifdef SUPPORT_TAGS
- && (tag == tmp->tag)
-#endif
- ) {
- if (prev) {
- REMOVE(prev, NEXT(prev), tmp, NEXT(tmp));
- SET_NEXT(prev, NEXT(tmp));
- } else {
- REMOVE(-1, hostdata->disconnected_queue, tmp, NEXT(tmp));
- hostdata->disconnected_queue = NEXT(tmp);
- }
- SET_NEXT(tmp, NULL);
- break;
- }
- }
-
- if (!tmp) {
- printk(KERN_WARNING "scsi%d: warning: target bitmask %02x lun %d "
-#ifdef SUPPORT_TAGS
- "tag %d "
-#endif
- "not in disconnected_queue.\n",
- HOSTNO, target_mask, lun
-#ifdef SUPPORT_TAGS
- , tag
-#endif
- );
- /*
- * Since we have an established nexus that we can't do anything
- * with, we must abort it.
- */
- do_abort(instance);
- return;
- }
-#if 1
- /* engage dma setup for the command we just saw */
- {
- void *d;
- unsigned long count;
-
- if (!tmp->SCp.this_residual && tmp->SCp.buffers_residual) {
- count = tmp->SCp.buffer->length;
- d = SGADDR(tmp->SCp.buffer);
- } else {
- count = tmp->SCp.this_residual;
- d = tmp->SCp.ptr;
- }
-#ifdef REAL_DMA
- /* setup this command for dma if not already */
- if((count > SUN3_DMA_MINSIZE) && (sun3_dma_setup_done != tmp))
- {
- sun3scsi_dma_setup(d, count, rq_data_dir(tmp->request));
- sun3_dma_setup_done = tmp;
- }
-#endif
- }
-#endif
-
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_ACK);
- /* Accept message by clearing ACK */
- NCR5380_write(INITIATOR_COMMAND_REG, ICR_BASE);
-
-#ifdef SUPPORT_TAGS
- /* If the phase is still MSGIN, the target wants to send some more
- * messages. In case it supports tagged queuing, this is probably a
- * SIMPLE_QUEUE_TAG for the I_T_L_Q nexus.
- */
- tag = TAG_NONE;
- if (phase == PHASE_MSGIN && setup_use_tagged_queuing) {
- /* Accept previous IDENTIFY message by clearing ACK */
- NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE );
- len = 2;
- data = msg+1;
- if (!NCR5380_transfer_pio(instance, &phase, &len, &data) &&
- msg[1] == SIMPLE_QUEUE_TAG)
- tag = msg[2];
- dprintk(NDEBUG_TAGS, "scsi%d: target mask %02x, lun %d sent tag %d at "
- "reselection\n", HOSTNO, target_mask, lun, tag);
- }
-#endif
-
- hostdata->connected = tmp;
- dprintk(NDEBUG_RESELECTION, "scsi%d: nexus established, target = %d, lun = %llu, tag = %d\n",
- HOSTNO, tmp->device->id, tmp->device->lun, tmp->tag);
-}
-
-
-/*
- * Function : int NCR5380_abort(struct scsi_cmnd *cmd)
- *
- * Purpose : abort a command
- *
- * Inputs : cmd - the struct scsi_cmnd to abort, code - code to set the
- * host byte of the result field to, if zero DID_ABORTED is
- * used.
- *
- * Returns : 0 - success, -1 on failure.
- *
- * XXX - there is no way to abort the command that is currently
- * connected, you have to wait for it to complete. If this is
- * a problem, we could implement longjmp() / setjmp(), setjmp()
- * called where the loop started in NCR5380_main().
- */
-
-static int NCR5380_abort(struct scsi_cmnd *cmd)
-{
- struct Scsi_Host *instance = cmd->device->host;
- SETUP_HOSTDATA(instance);
- struct scsi_cmnd *tmp, **prev;
- unsigned long flags;
-
- printk(KERN_NOTICE "scsi%d: aborting command\n", HOSTNO);
- scsi_print_command(cmd);
-
- NCR5380_print_status (instance);
-
- local_irq_save(flags);
-
- dprintk(NDEBUG_ABORT, "scsi%d: abort called basr 0x%02x, sr 0x%02x\n", HOSTNO,
- NCR5380_read(BUS_AND_STATUS_REG),
- NCR5380_read(STATUS_REG));
-
-#if 1
-/*
- * Case 1 : If the command is the currently executing command,
- * we'll set the aborted flag and return control so that
- * information transfer routine can exit cleanly.
- */
-
- if (hostdata->connected == cmd) {
-
- dprintk(NDEBUG_ABORT, "scsi%d: aborting connected command\n", HOSTNO);
-/*
- * We should perform BSY checking, and make sure we haven't slipped
- * into BUS FREE.
- */
-
-/* NCR5380_write(INITIATOR_COMMAND_REG, ICR_ASSERT_ATN); */
-/*
- * Since we can't change phases until we've completed the current
- * handshake, we have to source or sink a byte of data if the current
- * phase is not MSGOUT.
- */
-
-/*
- * Return control to the executing NCR drive so we can clear the
- * aborted flag and get back into our main loop.
- */
-
- if (do_abort(instance) == 0) {
- hostdata->aborted = 1;
- hostdata->connected = NULL;
- cmd->result = DID_ABORT << 16;
-#ifdef SUPPORT_TAGS
- cmd_free_tag( cmd );
-#else
- hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
-#endif
- local_irq_restore(flags);
- cmd->scsi_done(cmd);
- return SUCCESS;
- } else {
-/* local_irq_restore(flags); */
- printk("scsi%d: abort of connected command failed!\n", HOSTNO);
- return FAILED;
- }
- }
-#endif
-
-/*
- * Case 2 : If the command hasn't been issued yet, we simply remove it
- * from the issue queue.
- */
- for (prev = (struct scsi_cmnd **) &(hostdata->issue_queue),
- tmp = (struct scsi_cmnd *) hostdata->issue_queue;
- tmp; prev = NEXTADDR(tmp), tmp = NEXT(tmp))
- if (cmd == tmp) {
- REMOVE(5, *prev, tmp, NEXT(tmp));
- (*prev) = NEXT(tmp);
- SET_NEXT(tmp, NULL);
- tmp->result = DID_ABORT << 16;
- local_irq_restore(flags);
- dprintk(NDEBUG_ABORT, "scsi%d: abort removed command from issue queue.\n",
- HOSTNO);
- /* Tagged queuing note: no tag to free here, hasn't been assigned
- * yet... */
- tmp->scsi_done(tmp);
- return SUCCESS;
- }
-
-/*
- * Case 3 : If any commands are connected, we're going to fail the abort
- * and let the high level SCSI driver retry at a later time or
- * issue a reset.
- *
- * Timeouts, and therefore aborted commands, will be highly unlikely
- * and handling them cleanly in this situation would make the common
- * case of noresets less efficient, and would pollute our code. So,
- * we fail.
- */
-
- if (hostdata->connected) {
- local_irq_restore(flags);
- dprintk(NDEBUG_ABORT, "scsi%d: abort failed, command connected.\n", HOSTNO);
- return FAILED;
- }
-
-/*
- * Case 4: If the command is currently disconnected from the bus, and
- * there are no connected commands, we reconnect the I_T_L or
- * I_T_L_Q nexus associated with it, go into message out, and send
- * an abort message.
- *
- * This case is especially ugly. In order to reestablish the nexus, we
- * need to call NCR5380_select(). The easiest way to implement this
- * function was to abort if the bus was busy, and let the interrupt
- * handler triggered on the SEL for reselect take care of lost arbitrations
- * where necessary, meaning interrupts need to be enabled.
- *
- * When interrupts are enabled, the queues may change - so we
- * can't remove it from the disconnected queue before selecting it
- * because that could cause a failure in hashing the nexus if that
- * device reselected.
- *
- * Since the queues may change, we can't use the pointers from when we
- * first locate it.
- *
- * So, we must first locate the command, and if NCR5380_select()
- * succeeds, then issue the abort, relocate the command and remove
- * it from the disconnected queue.
- */
-
- for (tmp = (struct scsi_cmnd *) hostdata->disconnected_queue; tmp;
- tmp = NEXT(tmp))
- if (cmd == tmp) {
- local_irq_restore(flags);
- dprintk(NDEBUG_ABORT, "scsi%d: aborting disconnected command.\n", HOSTNO);
-
- if (NCR5380_select (instance, cmd, (int) cmd->tag))
- return FAILED;
-
- dprintk(NDEBUG_ABORT, "scsi%d: nexus reestablished.\n", HOSTNO);
-
- do_abort (instance);
-
- local_irq_save(flags);
- for (prev = (struct scsi_cmnd **) &(hostdata->disconnected_queue),
- tmp = (struct scsi_cmnd *) hostdata->disconnected_queue;
- tmp; prev = NEXTADDR(tmp), tmp = NEXT(tmp) )
- if (cmd == tmp) {
- REMOVE(5, *prev, tmp, NEXT(tmp));
- *prev = NEXT(tmp);
- SET_NEXT(tmp, NULL);
- tmp->result = DID_ABORT << 16;
- /* We must unlock the tag/LUN immediately here, since the
- * target goes to BUS FREE and doesn't send us another
- * message (COMMAND_COMPLETE or the like)
- */
-#ifdef SUPPORT_TAGS
- cmd_free_tag( tmp );
-#else
- hostdata->busy[cmd->device->id] &= ~(1 << cmd->device->lun);
-#endif
- local_irq_restore(flags);
- tmp->scsi_done(tmp);
- return SUCCESS;
- }
- }
-
-/*
- * Case 5 : If we reached this point, the command was not found in any of
- * the queues.
- *
- * We probably reached this point because of an unlikely race condition
- * between the command completing successfully and the abortion code,
- * so we won't panic, but we will notify the user in case something really
- * broke.
- */
-
- local_irq_restore(flags);
- printk(KERN_INFO "scsi%d: warning : SCSI command probably completed successfully before abortion\n", HOSTNO);
-
- return FAILED;
-}
-
-
-/*
- * Function : int NCR5380_bus_reset(struct scsi_cmnd *cmd)
- *
- * Purpose : reset the SCSI bus.
- *
- * Returns : SUCCESS or FAILURE
- *
- */
-
-static int NCR5380_bus_reset(struct scsi_cmnd *cmd)
-{
- SETUP_HOSTDATA(cmd->device->host);
- int i;
- unsigned long flags;
-#if defined(RESET_RUN_DONE)
- struct scsi_cmnd *connected, *disconnected_queue;
-#endif
-
-
- NCR5380_print_status (cmd->device->host);
-
- /* get in phase */
- NCR5380_write( TARGET_COMMAND_REG,
- PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) ));
- /* assert RST */
- NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST );
- udelay (40);
- /* reset NCR registers */
- NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE );
- NCR5380_write( MODE_REG, MR_BASE );
- NCR5380_write( TARGET_COMMAND_REG, 0 );
- NCR5380_write( SELECT_ENABLE_REG, 0 );
- /* ++roman: reset interrupt condition! otherwise no interrupts don't get
- * through anymore ... */
- (void)NCR5380_read( RESET_PARITY_INTERRUPT_REG );
-
- /* MSch 20140115 - looking at the generic NCR5380 driver, all of this
- * should go.
- * Catch-22: if we don't clear all queues, the SCSI driver lock will
- * not be released by atari_scsi_reset()!
- */
-
-#if defined(RESET_RUN_DONE)
- /* XXX Should now be done by midlevel code, but it's broken XXX */
- /* XXX see below XXX */
-
- /* MSch: old-style reset: actually abort all command processing here */
-
- /* After the reset, there are no more connected or disconnected commands
- * and no busy units; to avoid problems with re-inserting the commands
- * into the issue_queue (via scsi_done()), the aborted commands are
- * remembered in local variables first.
- */
- local_irq_save(flags);
- connected = (struct scsi_cmnd *)hostdata->connected;
- hostdata->connected = NULL;
- disconnected_queue = (struct scsi_cmnd *)hostdata->disconnected_queue;
- hostdata->disconnected_queue = NULL;
-#ifdef SUPPORT_TAGS
- free_all_tags();
-#endif
- for( i = 0; i < 8; ++i )
- hostdata->busy[i] = 0;
-#ifdef REAL_DMA
- hostdata->dma_len = 0;
-#endif
- local_irq_restore(flags);
-
- /* In order to tell the mid-level code which commands were aborted,
- * set the command status to DID_RESET and call scsi_done() !!!
- * This ultimately aborts processing of these commands in the mid-level.
- */
-
- if ((cmd = connected)) {
- dprintk(NDEBUG_ABORT, "scsi%d: reset aborted a connected command\n", H_NO(cmd));
- cmd->result = (cmd->result & 0xffff) | (DID_RESET << 16);
- cmd->scsi_done( cmd );
- }
-
- for (i = 0; (cmd = disconnected_queue); ++i) {
- disconnected_queue = NEXT(cmd);
- SET_NEXT(cmd, NULL);
- cmd->result = (cmd->result & 0xffff) | (DID_RESET << 16);
- cmd->scsi_done( cmd );
- }
- if (i > 0)
- dprintk(NDEBUG_ABORT, "scsi: reset aborted %d disconnected command(s)\n", i);
-
-
- /* since all commands have been explicitly terminated, we need to tell
- * the midlevel code that the reset was SUCCESSFUL, and there is no
- * need to 'wake up' the commands by a request_sense
- */
- return SUCCESS;
-#else /* 1 */
-
- /* MSch: new-style reset handling: let the mid-level do what it can */
-
- /* ++guenther: MID-LEVEL IS STILL BROKEN.
- * Mid-level is supposed to requeue all commands that were active on the
- * various low-level queues. In fact it does this, but that's not enough
- * because all these commands are subject to timeout. And if a timeout
- * happens for any removed command, *_abort() is called but all queues
- * are now empty. Abort then gives up the falcon lock, which is fatal,
- * since the mid-level will queue more commands and must have the lock
- * (it's all happening inside timer interrupt handler!!).
- * Even worse, abort will return NOT_RUNNING for all those commands not
- * on any queue, so they won't be retried ...
- *
- * Conclusion: either scsi.c disables timeout for all resetted commands
- * immediately, or we lose! As of linux-2.0.20 it doesn't.
- */
-
- /* After the reset, there are no more connected or disconnected commands
- * and no busy units; so clear the low-level status here to avoid
- * conflicts when the mid-level code tries to wake up the affected
- * commands!
- */
-
- if (hostdata->issue_queue)
- dprintk(NDEBUG_ABORT, "scsi%d: reset aborted issued command(s)\n", H_NO(cmd));
- if (hostdata->connected)
- dprintk(NDEBUG_ABORT, "scsi%d: reset aborted a connected command\n", H_NO(cmd));
- if (hostdata->disconnected_queue)
- dprintk(NDEBUG_ABORT, "scsi%d: reset aborted disconnected command(s)\n", H_NO(cmd));
-
- local_irq_save(flags);
- hostdata->issue_queue = NULL;
- hostdata->connected = NULL;
- hostdata->disconnected_queue = NULL;
-#ifdef SUPPORT_TAGS
- free_all_tags();
-#endif
- for( i = 0; i < 8; ++i )
- hostdata->busy[i] = 0;
-#ifdef REAL_DMA
- hostdata->dma_len = 0;
-#endif
- local_irq_restore(flags);
-
- /* we did no complete reset of all commands, so a wakeup is required */
- return SUCCESS;
-#endif /* 1 */
-}
-
-/* Local Variables: */
-/* tab-width: 8 */
-/* End: */
* Generic Generic NCR5380 driver
*
* Copyright 1995, Russell King
- *
- * ALPHA RELEASE 1.
- *
- * For more information, please consult
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
*/
-
-/*
- * This is from mac_scsi.h, but hey, maybe this is useful for Sun3 too! :)
- *
- * Options :
- *
- * PARITY - enable parity checking. Not supported.
- *
- * SCSI2 - enable support for SCSI-II tagged queueing. Untested.
- *
- * USLEEP - enable support for devices that don't disconnect. Untested.
- */
-
-#define AUTOSENSE
-
#include <linux/types.h>
-#include <linux/stddef.h>
-#include <linux/ctype.h>
#include <linux/delay.h>
-
#include <linux/module.h>
-#include <linux/signal.h>
#include <linux/ioport.h>
#include <linux/init.h>
#include <linux/blkdev.h>
+#include <linux/platform_device.h>
#include <asm/io.h>
-
-#include <asm/sun3ints.h>
#include <asm/dvma.h>
-#include <asm/idprom.h>
-#include <asm/machines.h>
-/* dma on! */
-#define REAL_DMA
-
-#include "scsi.h"
#include <scsi/scsi_host.h>
#include "sun3_scsi.h"
-#include "NCR5380.h"
-extern int sun3_map_test(unsigned long, char *);
+/* Definitions for the core NCR5380 driver. */
-#define USE_WRAPPER
-/*#define RESET_BOOT */
-#define DRIVER_SETUP
+#define REAL_DMA
+/* #define SUPPORT_TAGS */
+/* minimum number of bytes to do dma on */
+#define DMA_MIN_SIZE 129
-/*
- * BUG can be used to trigger a strange code-size related hang on 2.1 kernels
- */
-#ifdef BUG
-#undef RESET_BOOT
-#undef DRIVER_SETUP
-#endif
+/* #define MAX_TAGS 32 */
-/* #define SUPPORT_TAGS */
+#define NCR5380_implementation_fields /* none */
-#ifdef SUN3_SCSI_VME
-#define ENABLE_IRQ()
-#else
-#define ENABLE_IRQ() enable_irq( IRQ_SUN3_SCSI );
-#endif
+#define NCR5380_read(reg) sun3scsi_read(reg)
+#define NCR5380_write(reg, value) sun3scsi_write(reg, value)
+
+#define NCR5380_queue_command sun3scsi_queue_command
+#define NCR5380_bus_reset sun3scsi_bus_reset
+#define NCR5380_abort sun3scsi_abort
+#define NCR5380_show_info sun3scsi_show_info
+#define NCR5380_info sun3scsi_info
+#define NCR5380_dma_read_setup(instance, data, count) \
+ sun3scsi_dma_setup(data, count, 0)
+#define NCR5380_dma_write_setup(instance, data, count) \
+ sun3scsi_dma_setup(data, count, 1)
+#define NCR5380_dma_residual(instance) \
+ sun3scsi_dma_residual(instance)
+#define NCR5380_dma_xfer_len(instance, cmd, phase) \
+ sun3scsi_dma_xfer_len(cmd->SCp.this_residual, cmd, !((phase) & SR_IO))
-static irqreturn_t scsi_sun3_intr(int irq, void *dummy);
-static inline unsigned char sun3scsi_read(int reg);
-static inline void sun3scsi_write(int reg, int value);
+#define NCR5380_acquire_dma_irq(instance) (1)
+#define NCR5380_release_dma_irq(instance)
+
+#include "NCR5380.h"
+
+
+extern int sun3_map_test(unsigned long, char *);
static int setup_can_queue = -1;
module_param(setup_can_queue, int, 0);
static int setup_hostid = -1;
module_param(setup_hostid, int, 0);
-static struct scsi_cmnd *sun3_dma_setup_done = NULL;
-
-#define RESET_RUN_DONE
+/* #define RESET_BOOT */
#define AFTER_RESET_DELAY (HZ/2)
/* dvma buffer to allocate -- 32k should hopefully be more than sufficient */
#define SUN3_DVMA_BUFSIZE 0xe000
-/* minimum number of bytes to do dma on */
-#define SUN3_DMA_MINSIZE 128
-
-static volatile unsigned char *sun3_scsi_regp;
+static struct scsi_cmnd *sun3_dma_setup_done;
+static unsigned char *sun3_scsi_regp;
static volatile struct sun3_dma_regs *dregs;
-#ifndef SUN3_SCSI_VME
-static struct sun3_udc_regs *udc_regs = NULL;
-#endif
+static struct sun3_udc_regs *udc_regs;
static unsigned char *sun3_dma_orig_addr = NULL;
static unsigned long sun3_dma_orig_count = 0;
static int sun3_dma_active = 0;
static unsigned long last_residual = 0;
+static struct Scsi_Host *default_instance;
/*
* NCR 5380 register access functions
static inline unsigned char sun3scsi_read(int reg)
{
- return( sun3_scsi_regp[reg] );
+ return in_8(sun3_scsi_regp + reg);
}
static inline void sun3scsi_write(int reg, int value)
{
- sun3_scsi_regp[reg] = value;
+ out_8(sun3_scsi_regp + reg, value);
}
#ifndef SUN3_SCSI_VME
}
#endif
-/*
- * XXX: status debug
- */
-static struct Scsi_Host *default_instance;
-
-/*
- * Function : int sun3scsi_detect(struct scsi_host_template * tpnt)
- *
- * Purpose : initializes mac NCR5380 driver based on the
- * command line / compile time port and irq definitions.
- *
- * Inputs : tpnt - template for this SCSI adapter.
- *
- * Returns : 1 if a host adapter was found, 0 if not.
- *
- */
-
-static int __init sun3scsi_detect(struct scsi_host_template *tpnt)
-{
- unsigned long ioaddr, irq;
- static int called = 0;
- struct Scsi_Host *instance;
-#ifdef SUN3_SCSI_VME
- int i;
- unsigned long addrs[3] = { IOBASE_SUN3_VMESCSI,
- IOBASE_SUN3_VMESCSI + 0x4000,
- 0 };
- unsigned long vecs[3] = { SUN3_VEC_VMESCSI0,
- SUN3_VEC_VMESCSI1,
- 0 };
-#endif
-
- /* check that this machine has an onboard 5380 */
- switch(idprom->id_machtype) {
-#ifdef SUN3_SCSI_VME
- case SM_SUN3|SM_3_160:
- case SM_SUN3|SM_3_260:
- break;
-#else
- case SM_SUN3|SM_3_50:
- case SM_SUN3|SM_3_60:
- break;
-#endif
-
- default:
- return 0;
- }
-
- if(called)
- return 0;
-
-#ifdef SUN3_SCSI_VME
- tpnt->proc_name = "Sun3 5380 VME SCSI";
-#else
- tpnt->proc_name = "Sun3 5380 SCSI";
-#endif
-
- /* setup variables */
- tpnt->can_queue =
- (setup_can_queue > 0) ? setup_can_queue : CAN_QUEUE;
- tpnt->cmd_per_lun =
- (setup_cmd_per_lun > 0) ? setup_cmd_per_lun : CMD_PER_LUN;
- tpnt->sg_tablesize =
- (setup_sg_tablesize >= 0) ? setup_sg_tablesize : SG_TABLESIZE;
-
- if (setup_hostid >= 0)
- tpnt->this_id = setup_hostid;
- else {
- /* use 7 as default */
- tpnt->this_id = 7;
- }
-
-#ifdef SUN3_SCSI_VME
- ioaddr = 0;
- for (i = 0; addrs[i] != 0; i++) {
- unsigned char x;
-
- ioaddr = (unsigned long)sun3_ioremap(addrs[i], PAGE_SIZE,
- SUN3_PAGE_TYPE_VME16);
- irq = vecs[i];
- sun3_scsi_regp = (unsigned char *)ioaddr;
-
- dregs = (struct sun3_dma_regs *)(((unsigned char *)ioaddr) + 8);
-
- if (sun3_map_test((unsigned long)dregs, &x)) {
- unsigned short oldcsr;
-
- oldcsr = dregs->csr;
- dregs->csr = 0;
- udelay(SUN3_DMA_DELAY);
- if (dregs->csr == 0x1400)
- break;
-
- dregs->csr = oldcsr;
- }
-
- iounmap((void *)ioaddr);
- ioaddr = 0;
- }
-
- if (!ioaddr)
- return 0;
-#else
- irq = IRQ_SUN3_SCSI;
- ioaddr = (unsigned long)ioremap(IOBASE_SUN3_SCSI, PAGE_SIZE);
- sun3_scsi_regp = (unsigned char *)ioaddr;
-
- dregs = (struct sun3_dma_regs *)(((unsigned char *)ioaddr) + 8);
-
- if((udc_regs = dvma_malloc(sizeof(struct sun3_udc_regs)))
- == NULL) {
- printk("SUN3 Scsi couldn't allocate DVMA memory!\n");
- return 0;
- }
-#endif
-#ifdef SUPPORT_TAGS
- if (setup_use_tagged_queuing < 0)
- setup_use_tagged_queuing = USE_TAGGED_QUEUING;
-#endif
-
- instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata));
- if(instance == NULL)
- return 0;
-
- default_instance = instance;
-
- instance->io_port = (unsigned long) ioaddr;
- instance->irq = irq;
-
- NCR5380_init(instance, 0);
-
- instance->n_io_port = 32;
-
- ((struct NCR5380_hostdata *)instance->hostdata)->ctrl = 0;
-
- if (request_irq(instance->irq, scsi_sun3_intr,
- 0, "Sun3SCSI-5380", instance)) {
-#ifndef REAL_DMA
- printk("scsi%d: IRQ%d not free, interrupts disabled\n",
- instance->host_no, instance->irq);
- instance->irq = SCSI_IRQ_NONE;
-#else
- printk("scsi%d: IRQ%d not free, bailing out\n",
- instance->host_no, instance->irq);
- return 0;
-#endif
- }
-
- pr_info("scsi%d: %s at port %lX irq", instance->host_no,
- tpnt->proc_name, instance->io_port);
- if (instance->irq == SCSI_IRQ_NONE)
- printk ("s disabled");
- else
- printk (" %d", instance->irq);
- printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
- instance->can_queue, instance->cmd_per_lun,
- SUN3SCSI_PUBLIC_RELEASE);
- printk("\nscsi%d:", instance->host_no);
- NCR5380_print_options(instance);
- printk("\n");
-
- dregs->csr = 0;
- udelay(SUN3_DMA_DELAY);
- dregs->csr = CSR_SCSI | CSR_FIFO | CSR_INTR;
- udelay(SUN3_DMA_DELAY);
- dregs->fifo_count = 0;
-#ifdef SUN3_SCSI_VME
- dregs->fifo_count_hi = 0;
- dregs->dma_addr_hi = 0;
- dregs->dma_addr_lo = 0;
- dregs->dma_count_hi = 0;
- dregs->dma_count_lo = 0;
-
- dregs->ivect = VME_DATA24 | (instance->irq & 0xff);
-#endif
-
- called = 1;
-
-#ifdef RESET_BOOT
- sun3_scsi_reset_boot(instance);
-#endif
-
- return 1;
-}
-
-int sun3scsi_release (struct Scsi_Host *shpnt)
-{
- if (shpnt->irq != SCSI_IRQ_NONE)
- free_irq(shpnt->irq, shpnt);
-
- iounmap((void *)sun3_scsi_regp);
-
- NCR5380_exit(shpnt);
- return 0;
-}
-
#ifdef RESET_BOOT
-/*
- * Our 'bus reset on boot' function
- */
-
static void sun3_scsi_reset_boot(struct Scsi_Host *instance)
{
unsigned long end;
-
- NCR5380_local_declare();
- NCR5380_setup(instance);
/*
* Do a SCSI reset to clean up the bus during initialization. No
}
#endif
-static const char *sun3scsi_info(struct Scsi_Host *spnt)
-{
- return "";
-}
-
// safe bits for the CSR
#define CSR_GOOD 0x060f
void sun3_sun3_debug (void)
{
unsigned long flags;
- NCR5380_local_declare();
if (default_instance) {
local_irq_save(flags);
}
-#include "sun3_NCR5380.c"
+#include "atari_NCR5380.c"
-static struct scsi_host_template driver_template = {
+#ifdef SUN3_SCSI_VME
+#define SUN3_SCSI_NAME "Sun3 NCR5380 VME SCSI"
+#define DRV_MODULE_NAME "sun3_scsi_vme"
+#else
+#define SUN3_SCSI_NAME "Sun3 NCR5380 SCSI"
+#define DRV_MODULE_NAME "sun3_scsi"
+#endif
+
+#define PFX DRV_MODULE_NAME ": "
+
+static struct scsi_host_template sun3_scsi_template = {
+ .module = THIS_MODULE,
+ .proc_name = DRV_MODULE_NAME,
.show_info = sun3scsi_show_info,
.name = SUN3_SCSI_NAME,
- .detect = sun3scsi_detect,
- .release = sun3scsi_release,
.info = sun3scsi_info,
.queuecommand = sun3scsi_queue_command,
.eh_abort_handler = sun3scsi_abort,
.eh_bus_reset_handler = sun3scsi_bus_reset,
- .can_queue = CAN_QUEUE,
+ .can_queue = 16,
.this_id = 7,
- .sg_tablesize = SG_TABLESIZE,
- .cmd_per_lun = CMD_PER_LUN,
+ .sg_tablesize = SG_NONE,
+ .cmd_per_lun = 2,
.use_clustering = DISABLE_CLUSTERING
};
+static int __init sun3_scsi_probe(struct platform_device *pdev)
+{
+ struct Scsi_Host *instance;
+ int error;
+ struct resource *irq, *mem;
+ unsigned char *ioaddr;
+ int host_flags = 0;
+#ifdef SUN3_SCSI_VME
+ int i;
+#endif
+
+ if (setup_can_queue > 0)
+ sun3_scsi_template.can_queue = setup_can_queue;
+ if (setup_cmd_per_lun > 0)
+ sun3_scsi_template.cmd_per_lun = setup_cmd_per_lun;
+ if (setup_sg_tablesize >= 0)
+ sun3_scsi_template.sg_tablesize = setup_sg_tablesize;
+ if (setup_hostid >= 0)
+ sun3_scsi_template.this_id = setup_hostid & 7;
+
+#ifdef SUN3_SCSI_VME
+ ioaddr = NULL;
+ for (i = 0; i < 2; i++) {
+ unsigned char x;
+
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, i);
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, i);
+ if (!irq || !mem)
+ break;
+
+ ioaddr = sun3_ioremap(mem->start, resource_size(mem),
+ SUN3_PAGE_TYPE_VME16);
+ dregs = (struct sun3_dma_regs *)(ioaddr + 8);
+
+ if (sun3_map_test((unsigned long)dregs, &x)) {
+ unsigned short oldcsr;
+
+ oldcsr = dregs->csr;
+ dregs->csr = 0;
+ udelay(SUN3_DMA_DELAY);
+ if (dregs->csr == 0x1400)
+ break;
+
+ dregs->csr = oldcsr;
+ }
+
+ iounmap(ioaddr);
+ ioaddr = NULL;
+ }
+ if (!ioaddr)
+ return -ENODEV;
+#else
+ irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!irq || !mem)
+ return -ENODEV;
+
+ ioaddr = ioremap(mem->start, resource_size(mem));
+ dregs = (struct sun3_dma_regs *)(ioaddr + 8);
+
+ udc_regs = dvma_malloc(sizeof(struct sun3_udc_regs));
+ if (!udc_regs) {
+ pr_err(PFX "couldn't allocate DVMA memory!\n");
+ iounmap(ioaddr);
+ return -ENOMEM;
+ }
+#endif
+
+ sun3_scsi_regp = ioaddr;
+
+ instance = scsi_host_alloc(&sun3_scsi_template,
+ sizeof(struct NCR5380_hostdata));
+ if (!instance) {
+ error = -ENOMEM;
+ goto fail_alloc;
+ }
+ default_instance = instance;
+
+ instance->io_port = (unsigned long)ioaddr;
+ instance->irq = irq->start;
+
+#ifdef SUPPORT_TAGS
+ host_flags |= setup_use_tagged_queuing > 0 ? FLAG_TAGGED_QUEUING : 0;
+#endif
+
+ NCR5380_init(instance, host_flags);
+
+ error = request_irq(instance->irq, scsi_sun3_intr, 0,
+ "NCR5380", instance);
+ if (error) {
+#ifdef REAL_DMA
+ pr_err(PFX "scsi%d: IRQ %d not free, bailing out\n",
+ instance->host_no, instance->irq);
+ goto fail_irq;
+#else
+ pr_warn(PFX "scsi%d: IRQ %d not free, interrupts disabled\n",
+ instance->host_no, instance->irq);
+ instance->irq = NO_IRQ;
+#endif
+ }
+
+ dregs->csr = 0;
+ udelay(SUN3_DMA_DELAY);
+ dregs->csr = CSR_SCSI | CSR_FIFO | CSR_INTR;
+ udelay(SUN3_DMA_DELAY);
+ dregs->fifo_count = 0;
+#ifdef SUN3_SCSI_VME
+ dregs->fifo_count_hi = 0;
+ dregs->dma_addr_hi = 0;
+ dregs->dma_addr_lo = 0;
+ dregs->dma_count_hi = 0;
+ dregs->dma_count_lo = 0;
+
+ dregs->ivect = VME_DATA24 | (instance->irq & 0xff);
+#endif
+
+#ifdef RESET_BOOT
+ sun3_scsi_reset_boot(instance);
+#endif
+
+ error = scsi_add_host(instance, NULL);
+ if (error)
+ goto fail_host;
+
+ platform_set_drvdata(pdev, instance);
+
+ scsi_scan_host(instance);
+ return 0;
+
+fail_host:
+ if (instance->irq != NO_IRQ)
+ free_irq(instance->irq, instance);
+fail_irq:
+ NCR5380_exit(instance);
+ scsi_host_put(instance);
+fail_alloc:
+ if (udc_regs)
+ dvma_free(udc_regs);
+ iounmap(sun3_scsi_regp);
+ return error;
+}
+
+static int __exit sun3_scsi_remove(struct platform_device *pdev)
+{
+ struct Scsi_Host *instance = platform_get_drvdata(pdev);
+
+ scsi_remove_host(instance);
+ if (instance->irq != NO_IRQ)
+ free_irq(instance->irq, instance);
+ NCR5380_exit(instance);
+ scsi_host_put(instance);
+ if (udc_regs)
+ dvma_free(udc_regs);
+ iounmap(sun3_scsi_regp);
+ return 0;
+}
+
+static struct platform_driver sun3_scsi_driver = {
+ .remove = __exit_p(sun3_scsi_remove),
+ .driver = {
+ .name = DRV_MODULE_NAME,
+ .owner = THIS_MODULE,
+ },
+};
-#include "scsi_module.c"
+module_platform_driver_probe(sun3_scsi_driver, sun3_scsi_probe);
+MODULE_ALIAS("platform:" DRV_MODULE_NAME);
MODULE_LICENSE("GPL");
* (Unix and Linux consulting and custom programming)
* drew@colorado.edu
* +1 (303) 440-4894
- *
- * ALPHA RELEASE 1.
- *
- * For more information, please consult
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
*/
#ifndef SUN3_SCSI_H
#define SUN3_SCSI_H
-#define SUN3SCSI_PUBLIC_RELEASE 1
-
-/*
- * Int: level 2 autovector
- * IO: type 1, base 0x00140000, 5 bits phys space: A<4..0>
- */
-#define IRQ_SUN3_SCSI 2
-#define IOBASE_SUN3_SCSI 0x00140000
-
-#define IOBASE_SUN3_VMESCSI 0xff200000
-
-static int sun3scsi_abort(struct scsi_cmnd *);
-static int sun3scsi_detect (struct scsi_host_template *);
-static const char *sun3scsi_info (struct Scsi_Host *);
-static int sun3scsi_bus_reset(struct scsi_cmnd *);
-static int sun3scsi_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
-static int sun3scsi_release (struct Scsi_Host *);
-
-#ifndef CMD_PER_LUN
-#define CMD_PER_LUN 2
-#endif
-
-#ifndef CAN_QUEUE
-#define CAN_QUEUE 16
-#endif
-
-#ifndef SG_TABLESIZE
-#define SG_TABLESIZE SG_NONE
-#endif
-
-#ifndef MAX_TAGS
-#define MAX_TAGS 32
-#endif
-
-#ifndef USE_TAGGED_QUEUING
-#define USE_TAGGED_QUEUING 1
-#endif
-
-#include <scsi/scsicam.h>
-
-#ifdef SUN3_SCSI_VME
-#define SUN3_SCSI_NAME "Sun3 NCR5380 VME SCSI"
-#else
-#define SUN3_SCSI_NAME "Sun3 NCR5380 SCSI"
-#endif
-
-#define NCR5380_implementation_fields \
- int port, ctrl
-
-#define NCR5380_local_declare() \
- struct Scsi_Host *_instance
-
-#define NCR5380_setup(instance) \
- _instance = instance
-
-#define NCR5380_read(reg) sun3scsi_read(reg)
-#define NCR5380_write(reg, value) sun3scsi_write(reg, value)
-
-#define NCR5380_intr sun3scsi_intr
-#define NCR5380_queue_command sun3scsi_queue_command
-#define NCR5380_bus_reset sun3scsi_bus_reset
-#define NCR5380_abort sun3scsi_abort
-#define NCR5380_show_info sun3scsi_show_info
-#define NCR5380_dma_xfer_len(i, cmd, phase) \
- sun3scsi_dma_xfer_len(cmd->SCp.this_residual,cmd,((phase) & SR_IO) ? 0 : 1)
-
-#define NCR5380_dma_write_setup(instance, data, count) sun3scsi_dma_setup(data, count, 1)
-#define NCR5380_dma_read_setup(instance, data, count) sun3scsi_dma_setup(data, count, 0)
-#define NCR5380_dma_residual sun3scsi_dma_residual
-
/* additional registers - mainly DMA control regs */
/* these start at regbase + 8 -- directly after the NCR regs */
struct sun3_dma_regs {
if (reqtags > SYM_CONF_MAX_TAG)
reqtags = SYM_CONF_MAX_TAG;
depth_to_use = reqtags ? reqtags : 1;
- scsi_adjust_queue_depth(sdev,
- sdev->tagged_supported ? MSG_SIMPLE_TAG : 0,
- depth_to_use);
+ scsi_change_queue_depth(sdev, depth_to_use);
lp->s.scdev_depth = depth_to_use;
sym_tune_dev_queuing(tp, sdev->lun, reqtags);
-#define AUTOSENSE
#define PSEUDO_DMA
/*
* drew@colorado.edu
* +1 (303) 440-4894
*
- * DISTRIBUTION RELEASE 3.
- *
* For more information, please consult
*
* Trantor Systems, Ltd.
* 5415 Randall Place
* Fremont, CA 94538
* 1+ (415) 770-1400, FAX 1+ (415) 770-9910
- *
- * and
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
*/
/*
- * Options :
- * AUTOSENSE - if defined, REQUEST SENSE will be performed automatically
- * for commands that return with a CHECK CONDITION status.
- *
- * PSEUDO_DMA - enables PSEUDO-DMA hardware, should give a 3-4X performance
- * increase compared to polled I/O.
- *
- * PARITY - enable parity checking. Not supported.
- *
- * SCSI2 - enable support for SCSI-II tagged queueing. Untested.
- *
- *
- * UNSAFE - leave interrupts enabled during pseudo-DMA transfers. You
- * only really want to use this if you're having a problem with
- * dropped characters during high speed communications, and even
- * then, you're going to be better off twiddling with transfersize.
- *
- * USLEEP - enable support for devices that don't disconnect. Untested.
- *
* The card is detected and initialized in one of several ways :
* 1. Autoprobe (default) - since the board is memory mapped,
* a BIOS signature is scanned for to locate the registers.
#include <linux/module.h>
#include <linux/delay.h>
-#include "scsi.h"
#include <scsi/scsi_host.h>
#include "t128.h"
#define AUTOPROBE_IRQ
#define NO_SIGNATURES ARRAY_SIZE(signatures)
+#ifndef MODULE
/*
* Function : t128_setup(char *str, int *ints)
*
*
*/
-void __init t128_setup(char *str, int *ints){
+static int __init t128_setup(char *str)
+{
static int commandline_current = 0;
int i;
+ int ints[10];
+
+ get_options(str, ARRAY_SIZE(ints), ints);
if (ints[0] != 2)
printk("t128_setup : usage t128=address,irq\n");
else
}
++commandline_current;
}
+ return 1;
}
+__setup("t128=", t128_setup);
+#endif
+
/*
* Function : int t128_detect(struct scsi_host_template * tpnt)
*
*
*/
-int __init t128_detect(struct scsi_host_template * tpnt){
+static int __init t128_detect(struct scsi_host_template *tpnt)
+{
static int current_override = 0, current_base = 0;
struct Scsi_Host *instance;
unsigned long base;
void __iomem *p;
int sig, count;
- tpnt->proc_name = "t128";
- tpnt->show_info = t128_show_info;
- tpnt->write_info = t128_write_info;
-
for (count = 0; current_override < NO_OVERRIDES; ++current_override) {
base = 0;
p = NULL;
else
instance->irq = NCR5380_probe_irq(instance, T128_IRQS);
- if (instance->irq != SCSI_IRQ_NONE)
+ /* Compatibility with documented NCR5380 kernel parameters */
+ if (instance->irq == 255)
+ instance->irq = NO_IRQ;
+
+ if (instance->irq != NO_IRQ)
if (request_irq(instance->irq, t128_intr, 0, "t128",
instance)) {
printk("scsi%d : IRQ%d not free, interrupts disabled\n",
instance->host_no, instance->irq);
- instance->irq = SCSI_IRQ_NONE;
+ instance->irq = NO_IRQ;
}
- if (instance->irq == SCSI_IRQ_NONE) {
+ if (instance->irq == NO_IRQ) {
printk("scsi%d : interrupts not enabled. for better interactive performance,\n", instance->host_no);
printk("scsi%d : please jumper the board for a free IRQ.\n", instance->host_no);
}
printk("scsi%d : irq = %d\n", instance->host_no, instance->irq);
#endif
- printk("scsi%d : at 0x%08lx", instance->host_no, instance->base);
- if (instance->irq == SCSI_IRQ_NONE)
- printk (" interrupts disabled");
- else
- printk (" irq %d", instance->irq);
- printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
- CAN_QUEUE, CMD_PER_LUN, T128_PUBLIC_RELEASE);
- NCR5380_print_options(instance);
- printk("\n");
-
++current_override;
++count;
}
{
NCR5380_local_declare();
NCR5380_setup(shost);
- if (shost->irq)
+ if (shost->irq != NO_IRQ)
free_irq(shost->irq, shost);
NCR5380_exit(shost);
if (shost->io_port && shost->n_io_port)
* and matching the H_C_S coordinates to what DOS uses.
*/
-int t128_biosparam(struct scsi_device *sdev, struct block_device *bdev,
- sector_t capacity, int * ip)
+static int t128_biosparam(struct scsi_device *sdev, struct block_device *bdev,
+ sector_t capacity, int *ip)
{
ip[0] = 64;
ip[1] = 32;
.name = "Trantor T128/T128F/T228",
.detect = t128_detect,
.release = t128_release,
+ .proc_name = "t128",
+ .show_info = t128_show_info,
+ .write_info = t128_write_info,
+ .info = t128_info,
.queuecommand = t128_queue_command,
.eh_abort_handler = t128_abort,
.eh_bus_reset_handler = t128_bus_reset,
* drew@colorado.edu
* +1 (303) 440-4894
*
- * DISTRIBUTION RELEASE 3.
- *
* For more information, please consult
*
* Trantor Systems, Ltd.
* 5415 Randall Place
* Fremont, CA 94538
* 1+ (415) 770-1400, FAX 1+ (415) 770-9910
- *
- * and
- *
- * NCR 5380 Family
- * SCSI Protocol Controller
- * Databook
- *
- * NCR Microelectronics
- * 1635 Aeroplaza Drive
- * Colorado Springs, CO 80916
- * 1+ (719) 578-3400
- * 1+ (800) 334-5454
*/
#ifndef T128_H
#define T128_H
-#define T128_PUBLIC_RELEASE 3
-
#define TDEBUG 0
#define TDEBUG_INIT 0x1
#define TDEBUG_TRANSFER 0x2
#define T_DATA_REG_OFFSET 0x1e00 /* rw 512 bytes long */
#ifndef ASM
-static int t128_abort(struct scsi_cmnd *);
-static int t128_biosparam(struct scsi_device *, struct block_device *,
- sector_t, int*);
-static int t128_detect(struct scsi_host_template *);
-static int t128_queue_command(struct Scsi_Host *, struct scsi_cmnd *);
-static int t128_bus_reset(struct scsi_cmnd *);
#ifndef CMD_PER_LUN
#define CMD_PER_LUN 2
#define NCR5380_queue_command t128_queue_command
#define NCR5380_abort t128_abort
#define NCR5380_bus_reset t128_bus_reset
+#define NCR5380_info t128_info
#define NCR5380_show_info t128_show_info
#define NCR5380_write_info t128_write_info
+++ /dev/null
-/************************************************************************
- * FILE NAME : TMSCSIM.C *
- * BY : C.L. Huang, ching@tekram.com.tw *
- * Description: Device Driver for Tekram DC-390(T) PCI SCSI *
- * Bus Master Host Adapter *
- * (C)Copyright 1995-1996 Tekram Technology Co., Ltd. *
- ************************************************************************
- * (C) Copyright: put under GNU GPL in 10/96 *
- * (see Documentation/scsi/tmscsim.txt) *
- ************************************************************************
- * $Id: tmscsim.c,v 2.60.2.30 2000/12/20 01:07:12 garloff Exp $ *
- * Enhancements and bugfixes by *
- * Kurt Garloff <kurt@garloff.de> <garloff@suse.de> *
- ************************************************************************
- * HISTORY: *
- * *
- * REV# DATE NAME DESCRIPTION *
- * 1.00 96/04/24 CLH First release *
- * 1.01 96/06/12 CLH Fixed bug of Media Change for Removable *
- * Device, scan all LUN. Support Pre2.0.10 *
- * 1.02 96/06/18 CLH Fixed bug of Command timeout ... *
- * 1.03 96/09/25 KG Added tmscsim_proc_info() *
- * 1.04 96/10/11 CLH Updating for support KV 2.0.x *
- * 1.05 96/10/18 KG Fixed bug in DC390_abort(null ptr deref)*
- * 1.06 96/10/25 KG Fixed module support *
- * 1.07 96/11/09 KG Fixed tmscsim_proc_info() *
- * 1.08 96/11/18 KG Fixed null ptr in DC390_Disconnect() *
- * 1.09 96/11/30 KG Added register the allocated IO space *
- * 1.10 96/12/05 CLH Modified tmscsim_proc_info(), and reset *
- * pending interrupt in DC390_detect() *
- * 1.11 97/02/05 KG/CLH Fixeds problem with partitions greater *
- * than 1GB *
- * 1.12 98/02/15 MJ Rewritten PCI probing *
- * 1.13 98/04/08 KG Support for non DC390, __initfunc decls,*
- * changed max devs from 10 to 16 *
- * 1.14a 98/05/05 KG Dynamic DCB allocation, add-single-dev *
- * for LUNs if LUN_SCAN (BIOS) not set *
- * runtime config using /proc interface *
- * 1.14b 98/05/06 KG eliminated cli (); sti (); spinlocks *
- * 1.14c 98/05/07 KG 2.0.x compatibility *
- * 1.20a 98/05/07 KG changed names of funcs to be consistent *
- * DC390_ (entry points), dc390_ (internal)*
- * reworked locking *
- * 1.20b 98/05/12 KG bugs: version, kfree, _ctmp *
- * debug output *
- * 1.20c 98/05/12 KG bugs: kfree, parsing, EEpromDefaults *
- * 1.20d 98/05/14 KG bugs: list linkage, clear flag after *
- * reset on startup, code cleanup *
- * 1.20e 98/05/15 KG spinlock comments, name space cleanup *
- * pLastDCB now part of ACB structure *
- * added stats, timeout for 2.1, TagQ bug *
- * RESET and INQUIRY interface commands *
- * 1.20f 98/05/18 KG spinlocks fixes, max_lun fix, free DCBs *
- * for missing LUNs, pending int *
- * 1.20g 98/05/19 KG Clean up: Avoid short *
- * 1.20h 98/05/21 KG Remove AdaptSCSIID, max_lun ... *
- * 1.20i 98/05/21 KG Aiiie: Bug with TagQMask *
- * 1.20j 98/05/24 KG Handle STAT_BUSY, handle pACB->pLinkDCB *
- * == 0 in remove_dev and DoingSRB_Done *
- * 1.20k 98/05/25 KG DMA_INT (experimental) *
- * 1.20l 98/05/27 KG remove DMA_INT; DMA_IDLE cmds added; *
- * 1.20m 98/06/10 KG glitch configurable; made some global *
- * vars part of ACB; use DC390_readX *
- * 1.20n 98/06/11 KG startup params *
- * 1.20o 98/06/15 KG added TagMaxNum to boot/module params *
- * Device Nr -> Idx, TagMaxNum power of 2 *
- * 1.20p 98/06/17 KG Docu updates. Reset depends on settings *
- * pci_set_master added; 2.0.xx: pcibios_* *
- * used instead of MechNum things ... *
- * 1.20q 98/06/23 KG Changed defaults. Added debug code for *
- * removable media and fixed it. TagMaxNum *
- * fixed for DC390. Locking: ACB, DRV for *
- * better IRQ sharing. Spelling: Queueing *
- * Parsing and glitch_cfg changes. Display *
- * real SyncSpeed value. Made DisConn *
- * functional (!) *
- * 1.20r 98/06/30 KG Debug macros, allow disabling DsCn, set *
- * BIT4 in CtrlR4, EN_PAGE_INT, 2.0 module *
- * param -1 fixed. *
- * 1.20s 98/08/20 KG Debug info on abort(), try to check PCI,*
- * phys_to_bus instead of phys_to_virt, *
- * fixed sel. process, fixed locking, *
- * added MODULE_XXX infos, changed IRQ *
- * request flags, disable DMA_INT *
- * 1.20t 98/09/07 KG TagQ report fixed; Write Erase DMA Stat;*
- * initfunc -> __init; better abort; *
- * Timeout for XFER_DONE & BLAST_COMPLETE; *
- * Allow up to 33 commands being processed *
- * 2.0a 98/10/14 KG Max Cmnds back to 17. DMA_Stat clearing *
- * all flags. Clear within while() loops *
- * in DataIn_0/Out_0. Null ptr in dumpinfo *
- * for pSRB==0. Better locking during init.*
- * bios_param() now respects part. table. *
- * 2.0b 98/10/24 KG Docu fixes. Timeout Msg in DMA Blast. *
- * Disallow illegal idx in INQUIRY/REMOVE *
- * 2.0c 98/11/19 KG Cleaned up detect/init for SMP boxes, *
- * Write Erase DMA (1.20t) caused problems *
- * 2.0d 98/12/25 KG Christmas release ;-) Message handling *
- * completely reworked. Handle target ini- *
- * tiated SDTR correctly. *
- * 2.0d1 99/01/25 KG Try to handle RESTORE_PTR *
- * 2.0d2 99/02/08 KG Check for failure of kmalloc, correct *
- * inclusion of scsicam.h, DelayReset *
- * 2.0d3 99/05/31 KG DRIVER_OK -> DID_OK, DID_NO_CONNECT, *
- * detect Target mode and warn. *
- * pcmd->result handling cleaned up. *
- * 2.0d4 99/06/01 KG Cleaned selection process. Found bug *
- * which prevented more than 16 tags. Now: *
- * 24. SDTR cleanup. Cleaner multi-LUN *
- * handling. Don't modify ControlRegs/FIFO *
- * when connected. *
- * 2.0d5 99/06/01 KG Clear DevID, Fix INQUIRY after cfg chg. *
- * 2.0d6 99/06/02 KG Added ADD special command to allow cfg. *
- * before detection. Reset SYNC_NEGO_DONE *
- * after a bus reset. *
- * 2.0d7 99/06/03 KG Fixed bugs wrt add,remove commands *
- * 2.0d8 99/06/04 KG Removed copying of cmnd into CmdBlock. *
- * Fixed Oops in _release(). *
- * 2.0d9 99/06/06 KG Also tag queue INQUIRY, T_U_R, ... *
- * Allow arb. no. of Tagged Cmnds. Max 32 *
- * 2.0d1099/06/20 KG TagMaxNo changes now honoured! Queueing *
- * clearified (renamed ..) TagMask handling*
- * cleaned. *
- * 2.0d1199/06/28 KG cmd->result now identical to 2.0d2 *
- * 2.0d1299/07/04 KG Changed order of processing in IRQ *
- * 2.0d1399/07/05 KG Don't update DCB fields if removed *
- * 2.0d1499/07/05 KG remove_dev: Move kfree() to the end *
- * 2.0d1599/07/12 KG use_new_eh_code: 0, ULONG -> UINT where *
- * appropriate *
- * 2.0d1699/07/13 KG Reenable StartSCSI interrupt, Retry msg *
- * 2.0d1799/07/15 KG Remove debug msg. Disable recfg. when *
- * there are queued cmnds *
- * 2.0d1899/07/18 KG Selection timeout: Don't requeue *
- * 2.0d1999/07/18 KG Abort: Only call scsi_done if dequeued *
- * 2.0d2099/07/19 KG Rst_Detect: DoingSRB_Done *
- * 2.0d2199/08/15 KG dev_id for request/free_irq, cmnd[0] for*
- * RETRY, SRBdone does DID_ABORT for the *
- * cmd passed by DC390_reset() *
- * 2.0d2299/08/25 KG dev_id fixed. can_queue: 42 *
- * 2.0d2399/08/25 KG Removed some debugging code. dev_id *
- * now is set to pACB. Use u8,u16,u32. *
- * 2.0d2499/11/14 KG Unreg. I/O if failed IRQ alloc. Call *
- * done () w/ DID_BAD_TARGET in case of *
- * missing DCB. We are old EH!! *
- * 2.0d2500/01/15 KG 2.3.3x compat from Andreas Schultz *
- * set unique_id. Disable RETRY message. *
- * 2.0d2600/01/29 KG Go to new EH. *
- * 2.0d2700/01/31 KG ... but maintain 2.0 compat. *
- * and fix DCB freeing *
- * 2.0d2800/02/14 KG Queue statistics fixed, dump special cmd*
- * Waiting_Timer for failed StartSCSI *
- * New EH: Don't return cmnds to ML on RST *
- * Use old EH (don't have new EH fns yet) *
- * Reset: Unlock, but refuse to queue *
- * 2.3 __setup function *
- * 2.0e 00/05/22 KG Return residual for 2.3 *
- * 2.0e1 00/05/25 KG Compile fixes for 2.3.99 *
- * 2.0e2 00/05/27 KG Jeff Garzik's pci_enable_device() *
- * 2.0e3 00/09/29 KG Some 2.4 changes. Don't try Sync Nego *
- * before INQUIRY has reported ability. *
- * Recognise INQUIRY as scanning command. *
- * 2.0e4 00/10/13 KG Allow compilation into 2.4 kernel *
- * 2.0e5 00/11/17 KG Store Inq.flags in DCB *
- * 2.0e6 00/11/22 KG 2.4 init function (Thx to O.Schumann) *
- * 2.4 PCI device table (Thx to A.Richter) *
- * 2.0e7 00/11/28 KG Allow overriding of BIOS settings *
- * 2.0f 00/12/20 KG Handle failed INQUIRYs during scan *
- * 2.1a 03/11/29 GL, KG Initial fixing for 2.6. Convert to *
- * use the current PCI-mapping API, update *
- * command-queuing. *
- * 2.1b 04/04/13 GL Fix for 64-bit platforms *
- * 2.1b1 04/01/31 GL (applied 05.04) Remove internal *
- * command-queuing. *
- * 2.1b2 04/02/01 CH (applied 05.04) Fix error-handling *
- * 2.1c 04/05/23 GL Update to use the new pci_driver API, *
- * some scsi EH updates, more cleanup. *
- * 2.1d 04/05/27 GL Moved setting of scan_devices to *
- * slave_alloc/_configure/_destroy, as *
- * suggested by CH. *
- ***********************************************************************/
-
-/* DEBUG options */
-//#define DC390_DEBUG0
-//#define DC390_DEBUG1
-//#define DC390_DCBDEBUG
-//#define DC390_PARSEDEBUG
-//#define DC390_REMOVABLEDEBUG
-//#define DC390_LOCKDEBUG
-
-//#define NOP do{}while(0)
-#define C_NOP
-
-/* Debug definitions */
-#ifdef DC390_DEBUG0
-# define DEBUG0(x) x
-#else
-# define DEBUG0(x) C_NOP
-#endif
-#ifdef DC390_DEBUG1
-# define DEBUG1(x) x
-#else
-# define DEBUG1(x) C_NOP
-#endif
-#ifdef DC390_DCBDEBUG
-# define DCBDEBUG(x) x
-#else
-# define DCBDEBUG(x) C_NOP
-#endif
-#ifdef DC390_PARSEDEBUG
-# define PARSEDEBUG(x) x
-#else
-# define PARSEDEBUG(x) C_NOP
-#endif
-#ifdef DC390_REMOVABLEDEBUG
-# define REMOVABLEDEBUG(x) x
-#else
-# define REMOVABLEDEBUG(x) C_NOP
-#endif
-#define DCBDEBUG1(x) C_NOP
-
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/signal.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/proc_fs.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/blkdev.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/slab.h>
-#include <asm/io.h>
-
-#include <scsi/scsi.h>
-#include <scsi/scsi_cmnd.h>
-#include <scsi/scsi_device.h>
-#include <scsi/scsi_host.h>
-#include <scsi/scsicam.h>
-#include <scsi/scsi_tcq.h>
-
-
-#define DC390_BANNER "Tekram DC390/AM53C974"
-#define DC390_VERSION "2.1d 2004-05-27"
-
-#define PCI_DEVICE_ID_AMD53C974 PCI_DEVICE_ID_AMD_SCSI
-
-#include "tmscsim.h"
-
-
-static void dc390_DataOut_0( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus);
-static void dc390_DataIn_0( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus);
-static void dc390_Command_0( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus);
-static void dc390_Status_0( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus);
-static void dc390_MsgOut_0( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus);
-static void dc390_MsgIn_0( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus);
-static void dc390_DataOutPhase( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus);
-static void dc390_DataInPhase( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus);
-static void dc390_CommandPhase( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus);
-static void dc390_StatusPhase( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus);
-static void dc390_MsgOutPhase( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus);
-static void dc390_MsgInPhase( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus);
-static void dc390_Nop_0( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus);
-static void dc390_Nop_1( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus);
-
-static void dc390_SetXferRate( struct dc390_acb* pACB, struct dc390_dcb* pDCB );
-static void dc390_Disconnect( struct dc390_acb* pACB );
-static void dc390_Reselect( struct dc390_acb* pACB );
-static void dc390_SRBdone( struct dc390_acb* pACB, struct dc390_dcb* pDCB, struct dc390_srb* pSRB );
-static void dc390_ScsiRstDetect( struct dc390_acb* pACB );
-static void dc390_EnableMsgOut_Abort(struct dc390_acb*, struct dc390_srb*);
-static void dc390_dumpinfo(struct dc390_acb* pACB, struct dc390_dcb* pDCB, struct dc390_srb* pSRB);
-static void dc390_ResetDevParam(struct dc390_acb* pACB);
-
-static u32 dc390_laststatus = 0;
-static u8 dc390_adapterCnt = 0;
-
-static int disable_clustering;
-module_param(disable_clustering, int, S_IRUGO);
-MODULE_PARM_DESC(disable_clustering, "If you experience problems with your devices, try setting to 1");
-
-/* Startup values, to be overriden on the commandline */
-static int tmscsim[] = {-2, -2, -2, -2, -2, -2};
-
-module_param_array(tmscsim, int, NULL, 0);
-MODULE_PARM_DESC(tmscsim, "Host SCSI ID, Speed (0=10MHz), Device Flags, Adapter Flags, Max Tags (log2(tags)-1), DelayReset (s)");
-MODULE_AUTHOR("C.L. Huang / Kurt Garloff");
-MODULE_DESCRIPTION("SCSI host adapter driver for Tekram DC390 and other AMD53C974A based PCI SCSI adapters");
-MODULE_LICENSE("GPL");
-MODULE_SUPPORTED_DEVICE("sd,sr,sg,st");
-
-static void *dc390_phase0[]={
- dc390_DataOut_0,
- dc390_DataIn_0,
- dc390_Command_0,
- dc390_Status_0,
- dc390_Nop_0,
- dc390_Nop_0,
- dc390_MsgOut_0,
- dc390_MsgIn_0,
- dc390_Nop_1
- };
-
-static void *dc390_phase1[]={
- dc390_DataOutPhase,
- dc390_DataInPhase,
- dc390_CommandPhase,
- dc390_StatusPhase,
- dc390_Nop_0,
- dc390_Nop_0,
- dc390_MsgOutPhase,
- dc390_MsgInPhase,
- dc390_Nop_1
- };
-
-#ifdef DC390_DEBUG1
-static char* dc390_p0_str[] = {
- "dc390_DataOut_0",
- "dc390_DataIn_0",
- "dc390_Command_0",
- "dc390_Status_0",
- "dc390_Nop_0",
- "dc390_Nop_0",
- "dc390_MsgOut_0",
- "dc390_MsgIn_0",
- "dc390_Nop_1"
- };
-
-static char* dc390_p1_str[] = {
- "dc390_DataOutPhase",
- "dc390_DataInPhase",
- "dc390_CommandPhase",
- "dc390_StatusPhase",
- "dc390_Nop_0",
- "dc390_Nop_0",
- "dc390_MsgOutPhase",
- "dc390_MsgInPhase",
- "dc390_Nop_1"
- };
-#endif
-
-static u8 dc390_eepromBuf[MAX_ADAPTER_NUM][EE_LEN];
-static u8 dc390_clock_period1[] = {4, 5, 6, 7, 8, 10, 13, 20};
-static u8 dc390_clock_speed[] = {100,80,67,57,50, 40, 31, 20};
-
-/***********************************************************************
- * Functions for the management of the internal structures
- * (DCBs, SRBs, Queueing)
- *
- **********************************************************************/
-static void inline dc390_start_segment(struct dc390_srb* pSRB)
-{
- struct scatterlist *psgl = pSRB->pSegmentList;
-
- /* start new sg segment */
- pSRB->SGBusAddr = sg_dma_address(psgl);
- pSRB->SGToBeXferLen = sg_dma_len(psgl);
-}
-
-static unsigned long inline dc390_advance_segment(struct dc390_srb* pSRB, u32 residue)
-{
- unsigned long xfer = pSRB->SGToBeXferLen - residue;
-
- /* xfer more bytes transferred */
- pSRB->SGBusAddr += xfer;
- pSRB->TotalXferredLen += xfer;
- pSRB->SGToBeXferLen = residue;
-
- return xfer;
-}
-
-static struct dc390_dcb __inline__ *dc390_findDCB ( struct dc390_acb* pACB, u8 id, u8 lun)
-{
- struct dc390_dcb* pDCB = pACB->pLinkDCB; if (!pDCB) return NULL;
- while (pDCB->TargetID != id || pDCB->TargetLUN != lun)
- {
- pDCB = pDCB->pNextDCB;
- if (pDCB == pACB->pLinkDCB)
- return NULL;
- }
- DCBDEBUG1( printk (KERN_DEBUG "DCB %p (%02x,%02x) found.\n", \
- pDCB, pDCB->TargetID, pDCB->TargetLUN));
- return pDCB;
-}
-
-/* Insert SRB oin top of free list */
-static __inline__ void dc390_Free_insert (struct dc390_acb* pACB, struct dc390_srb* pSRB)
-{
- DEBUG0(printk ("DC390: Free SRB %p\n", pSRB));
- pSRB->pNextSRB = pACB->pFreeSRB;
- pACB->pFreeSRB = pSRB;
-}
-
-static __inline__ void dc390_Going_append (struct dc390_dcb* pDCB, struct dc390_srb* pSRB)
-{
- pDCB->GoingSRBCnt++;
- DEBUG0(printk("DC390: Append SRB %p to Going\n", pSRB));
- /* Append to the list of Going commands */
- if( pDCB->pGoingSRB )
- pDCB->pGoingLast->pNextSRB = pSRB;
- else
- pDCB->pGoingSRB = pSRB;
-
- pDCB->pGoingLast = pSRB;
- /* No next one in sent list */
- pSRB->pNextSRB = NULL;
-}
-
-static __inline__ void dc390_Going_remove (struct dc390_dcb* pDCB, struct dc390_srb* pSRB)
-{
- DEBUG0(printk("DC390: Remove SRB %p from Going\n", pSRB));
- if (pSRB == pDCB->pGoingSRB)
- pDCB->pGoingSRB = pSRB->pNextSRB;
- else
- {
- struct dc390_srb* psrb = pDCB->pGoingSRB;
- while (psrb && psrb->pNextSRB != pSRB)
- psrb = psrb->pNextSRB;
- if (!psrb)
- { printk (KERN_ERR "DC390: Remove non-ex. SRB %p from Going!\n", pSRB); return; }
- psrb->pNextSRB = pSRB->pNextSRB;
- if (pSRB == pDCB->pGoingLast)
- pDCB->pGoingLast = psrb;
- }
- pDCB->GoingSRBCnt--;
-}
-
-static struct scatterlist* dc390_sg_build_single(struct scatterlist *sg, void *addr, unsigned int length)
-{
- sg_init_one(sg, addr, length);
- return sg;
-}
-
-/* Create pci mapping */
-static int dc390_pci_map (struct dc390_srb* pSRB)
-{
- int error = 0;
- struct scsi_cmnd *pcmd = pSRB->pcmd;
- struct pci_dev *pdev = pSRB->pSRBDCB->pDCBACB->pdev;
- dc390_cmd_scp_t* cmdp = ((dc390_cmd_scp_t*)(&pcmd->SCp));
-
- /* Map sense buffer */
- if (pSRB->SRBFlag & AUTO_REQSENSE) {
- pSRB->pSegmentList = dc390_sg_build_single(&pSRB->Segmentx, pcmd->sense_buffer, SCSI_SENSE_BUFFERSIZE);
- pSRB->SGcount = pci_map_sg(pdev, pSRB->pSegmentList, 1,
- DMA_FROM_DEVICE);
- cmdp->saved_dma_handle = sg_dma_address(pSRB->pSegmentList);
-
- /* TODO: error handling */
- if (pSRB->SGcount != 1)
- error = 1;
- DEBUG1(printk("%s(): Mapped sense buffer %p at %x\n", __func__, pcmd->sense_buffer, cmdp->saved_dma_handle));
- /* Map SG list */
- } else if (scsi_sg_count(pcmd)) {
- int nseg;
-
- nseg = scsi_dma_map(pcmd);
-
- pSRB->pSegmentList = scsi_sglist(pcmd);
- pSRB->SGcount = nseg;
-
- /* TODO: error handling */
- if (nseg < 0)
- error = 1;
- DEBUG1(printk("%s(): Mapped SG %p with %d (%d) elements\n",\
- __func__, scsi_sglist(pcmd), nseg, scsi_sg_count(pcmd)));
- /* Map single segment */
- } else
- pSRB->SGcount = 0;
-
- return error;
-}
-
-/* Remove pci mapping */
-static void dc390_pci_unmap (struct dc390_srb* pSRB)
-{
- struct scsi_cmnd *pcmd = pSRB->pcmd;
- struct pci_dev *pdev = pSRB->pSRBDCB->pDCBACB->pdev;
- DEBUG1(dc390_cmd_scp_t* cmdp = ((dc390_cmd_scp_t*)(&pcmd->SCp)));
-
- if (pSRB->SRBFlag) {
- pci_unmap_sg(pdev, &pSRB->Segmentx, 1, DMA_FROM_DEVICE);
- DEBUG1(printk("%s(): Unmapped sense buffer at %x\n", __func__, cmdp->saved_dma_handle));
- } else {
- scsi_dma_unmap(pcmd);
- DEBUG1(printk("%s(): Unmapped SG at %p with %d elements\n",
- __func__, scsi_sglist(pcmd), scsi_sg_count(pcmd)));
- }
-}
-
-static void __inline__
-dc390_freetag (struct dc390_dcb* pDCB, struct dc390_srb* pSRB)
-{
- if (pSRB->TagNumber != SCSI_NO_TAG) {
- pDCB->TagMask &= ~(1 << pSRB->TagNumber); /* free tag mask */
- pSRB->TagNumber = SCSI_NO_TAG;
- }
-}
-
-
-static int
-dc390_StartSCSI( struct dc390_acb* pACB, struct dc390_dcb* pDCB, struct dc390_srb* pSRB )
-{
- struct scsi_cmnd *scmd = pSRB->pcmd;
- struct scsi_device *sdev = scmd->device;
- u8 cmd, disc_allowed, try_sync_nego;
- char tag[2];
-
- pSRB->ScsiPhase = SCSI_NOP0;
-
- if (pACB->Connected)
- {
- // Should not happen normally
- printk (KERN_WARNING "DC390: Can't select when connected! (%08x,%02x)\n",
- pSRB->SRBState, pSRB->SRBFlag);
- pSRB->SRBState = SRB_READY;
- pACB->SelConn++;
- return 1;
- }
- if (time_before (jiffies, pACB->last_reset))
- {
- DEBUG0(printk ("DC390: We were just reset and don't accept commands yet!\n"));
- return 1;
- }
- /* KG: Moved pci mapping here */
- dc390_pci_map(pSRB);
- /* TODO: error handling */
- DC390_write8 (Scsi_Dest_ID, pDCB->TargetID);
- DC390_write8 (Sync_Period, pDCB->SyncPeriod);
- DC390_write8 (Sync_Offset, pDCB->SyncOffset);
- DC390_write8 (CtrlReg1, pDCB->CtrlR1);
- DC390_write8 (CtrlReg3, pDCB->CtrlR3);
- DC390_write8 (CtrlReg4, pDCB->CtrlR4);
- DC390_write8 (ScsiCmd, CLEAR_FIFO_CMD); /* Flush FIFO */
- DEBUG1(printk (KERN_INFO "DC390: Start SCSI command: %02x (Sync:%02x)\n",\
- scmd->cmnd[0], pDCB->SyncMode));
-
- /* Don't disconnect on AUTO_REQSENSE, cause it might be an
- * Contingent Allegiance Condition (6.6), where no tags should be used.
- * All other have to be allowed to disconnect to prevent Incorrect
- * Initiator Connection (6.8.2/6.5.2) */
- /* Changed KG, 99/06/06 */
- if (! (pSRB->SRBFlag & AUTO_REQSENSE))
- disc_allowed = pDCB->DevMode & EN_DISCONNECT_;
- else
- disc_allowed = 0;
-
- if ((pDCB->SyncMode & SYNC_ENABLE) && pDCB->TargetLUN == 0 && sdev->sdtr &&
- (((scmd->cmnd[0] == REQUEST_SENSE || (pSRB->SRBFlag & AUTO_REQSENSE)) &&
- !(pDCB->SyncMode & SYNC_NEGO_DONE)) || scmd->cmnd[0] == INQUIRY))
- try_sync_nego = 1;
- else
- try_sync_nego = 0;
-
- pSRB->MsgCnt = 0;
- cmd = SEL_W_ATN;
- DC390_write8 (ScsiFifo, IDENTIFY(disc_allowed, pDCB->TargetLUN));
- /* Change 99/05/31: Don't use tags when not disconnecting (BUSY) */
- if ((pDCB->SyncMode & EN_TAG_QUEUEING) && disc_allowed && scsi_populate_tag_msg(scmd, tag)) {
- DC390_write8(ScsiFifo, tag[0]);
- pDCB->TagMask |= 1 << tag[1];
- pSRB->TagNumber = tag[1];
- DC390_write8(ScsiFifo, tag[1]);
- DEBUG1(printk(KERN_INFO "DC390: Select w/DisCn for SRB %p, block tag %02x\n", pSRB, tag[1]));
- cmd = SEL_W_ATN3;
- } else {
- /* No TagQ */
-//no_tag:
- DEBUG1(printk(KERN_INFO "DC390: Select w%s/DisCn for SRB %p, No TagQ\n", disc_allowed ? "" : "o", pSRB));
- }
-
- pSRB->SRBState = SRB_START_;
-
- if (try_sync_nego)
- {
- u8 Sync_Off = pDCB->SyncOffset;
- DEBUG0(printk (KERN_INFO "DC390: NEW Sync Nego code triggered (%i %i)\n", pDCB->TargetID, pDCB->TargetLUN));
- pSRB->MsgOutBuf[0] = EXTENDED_MESSAGE;
- pSRB->MsgOutBuf[1] = 3;
- pSRB->MsgOutBuf[2] = EXTENDED_SDTR;
- pSRB->MsgOutBuf[3] = pDCB->NegoPeriod;
- if (!(Sync_Off & 0x0f)) Sync_Off = SYNC_NEGO_OFFSET;
- pSRB->MsgOutBuf[4] = Sync_Off;
- pSRB->MsgCnt = 5;
- //pSRB->SRBState = SRB_MSGOUT_;
- pSRB->SRBState |= DO_SYNC_NEGO;
- cmd = SEL_W_ATN_STOP;
- }
-
- /* Command is written in CommandPhase, if SEL_W_ATN_STOP ... */
- if (cmd != SEL_W_ATN_STOP)
- {
- if( pSRB->SRBFlag & AUTO_REQSENSE )
- {
- DC390_write8 (ScsiFifo, REQUEST_SENSE);
- DC390_write8 (ScsiFifo, pDCB->TargetLUN << 5);
- DC390_write8 (ScsiFifo, 0);
- DC390_write8 (ScsiFifo, 0);
- DC390_write8 (ScsiFifo, SCSI_SENSE_BUFFERSIZE);
- DC390_write8 (ScsiFifo, 0);
- DEBUG1(printk (KERN_DEBUG "DC390: AutoReqSense !\n"));
- }
- else /* write cmnd to bus */
- {
- u8 *ptr; u8 i;
- ptr = (u8 *)scmd->cmnd;
- for (i = 0; i < scmd->cmd_len; i++)
- DC390_write8 (ScsiFifo, *(ptr++));
- }
- }
- DEBUG0(if (pACB->pActiveDCB) \
- printk (KERN_WARNING "DC390: ActiveDCB != 0\n"));
- DEBUG0(if (pDCB->pActiveSRB) \
- printk (KERN_WARNING "DC390: ActiveSRB != 0\n"));
- //DC390_write8 (DMA_Cmd, DMA_IDLE_CMD);
- if (DC390_read8 (Scsi_Status) & INTERRUPT)
- {
- dc390_freetag (pDCB, pSRB);
- DEBUG0(printk ("DC390: Interrupt during Start SCSI (target %02i-%02i)\n",
- scmd->device->id, (u8)scmd->device->lun));
- pSRB->SRBState = SRB_READY;
- //DC390_write8 (ScsiCmd, CLEAR_FIFO_CMD);
- pACB->SelLost++;
- return 1;
- }
- DC390_write8 (ScsiCmd, cmd);
- pACB->pActiveDCB = pDCB;
- pDCB->pActiveSRB = pSRB;
- pACB->Connected = 1;
- pSRB->ScsiPhase = SCSI_NOP1;
- return 0;
-}
-
-
-static void __inline__
-dc390_InvalidCmd(struct dc390_acb* pACB)
-{
- if (pACB->pActiveDCB->pActiveSRB->SRBState & (SRB_START_ | SRB_MSGOUT))
- DC390_write8(ScsiCmd, CLEAR_FIFO_CMD);
-}
-
-
-static irqreturn_t __inline__
-DC390_Interrupt(void *dev_id)
-{
- struct dc390_acb *pACB = dev_id;
- struct dc390_dcb *pDCB;
- struct dc390_srb *pSRB;
- u8 sstatus=0;
- u8 phase;
- void (*stateV)( struct dc390_acb*, struct dc390_srb*, u8 *);
- u8 istate, istatus;
-
- sstatus = DC390_read8 (Scsi_Status);
- if( !(sstatus & INTERRUPT) )
- return IRQ_NONE;
-
- DEBUG1(printk (KERN_DEBUG "sstatus=%02x,", sstatus));
-
- //DC390_write32 (DMA_ScsiBusCtrl, WRT_ERASE_DMA_STAT | EN_INT_ON_PCI_ABORT);
- //dstatus = DC390_read8 (DMA_Status);
- //DC390_write32 (DMA_ScsiBusCtrl, EN_INT_ON_PCI_ABORT);
-
- spin_lock_irq(pACB->pScsiHost->host_lock);
-
- istate = DC390_read8 (Intern_State);
- istatus = DC390_read8 (INT_Status); /* This clears Scsi_Status, Intern_State and INT_Status ! */
-
- DEBUG1(printk (KERN_INFO "Istatus(Res,Inv,Dis,Serv,Succ,ReS,SelA,Sel)=%02x,",istatus));
- dc390_laststatus &= ~0x00ffffff;
- dc390_laststatus |= /* dstatus<<24 | */ sstatus<<16 | istate<<8 | istatus;
-
- if (sstatus & ILLEGAL_OP_ERR)
- {
- printk ("DC390: Illegal Operation detected (%08x)!\n", dc390_laststatus);
- dc390_dumpinfo (pACB, pACB->pActiveDCB, pACB->pActiveDCB->pActiveSRB);
- }
-
- else if (istatus & INVALID_CMD)
- {
- printk ("DC390: Invalid Command detected (%08x)!\n", dc390_laststatus);
- dc390_InvalidCmd( pACB );
- goto unlock;
- }
-
- if (istatus & SCSI_RESET)
- {
- dc390_ScsiRstDetect( pACB );
- goto unlock;
- }
-
- if (istatus & DISCONNECTED)
- {
- dc390_Disconnect( pACB );
- goto unlock;
- }
-
- if (istatus & RESELECTED)
- {
- dc390_Reselect( pACB );
- goto unlock;
- }
-
- else if (istatus & (SELECTED | SEL_ATTENTION))
- {
- printk (KERN_ERR "DC390: Target mode not supported!\n");
- goto unlock;
- }
-
- if (istatus & (SUCCESSFUL_OP|SERVICE_REQUEST) )
- {
- pDCB = pACB->pActiveDCB;
- if (!pDCB)
- {
- printk (KERN_ERR "DC390: Suc. op/ Serv. req: pActiveDCB = 0!\n");
- goto unlock;
- }
- pSRB = pDCB->pActiveSRB;
- if( pDCB->DCBFlag & ABORT_DEV_ )
- dc390_EnableMsgOut_Abort (pACB, pSRB);
-
- phase = pSRB->ScsiPhase;
- DEBUG1(printk (KERN_INFO "DC390: [%i]%s(0) (%02x)\n", phase, dc390_p0_str[phase], sstatus));
- stateV = (void *) dc390_phase0[phase];
- ( *stateV )( pACB, pSRB, &sstatus );
-
- pSRB->ScsiPhase = sstatus & 7;
- phase = (u8) sstatus & 7;
- DEBUG1(printk (KERN_INFO "DC390: [%i]%s(1) (%02x)\n", phase, dc390_p1_str[phase], sstatus));
- stateV = (void *) dc390_phase1[phase];
- ( *stateV )( pACB, pSRB, &sstatus );
- }
-
- unlock:
- spin_unlock_irq(pACB->pScsiHost->host_lock);
- return IRQ_HANDLED;
-}
-
-static irqreturn_t do_DC390_Interrupt(int irq, void *dev_id)
-{
- irqreturn_t ret;
- DEBUG1(printk (KERN_INFO "DC390: Irq (%i) caught: ", irq));
- /* Locking is done in DC390_Interrupt */
- ret = DC390_Interrupt(dev_id);
- DEBUG1(printk (".. IRQ returned\n"));
- return ret;
-}
-
-static void
-dc390_DataOut_0(struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus)
-{
- u8 sstatus;
- u32 ResidCnt;
- u8 dstate = 0;
-
- sstatus = *psstatus;
-
- if( !(pSRB->SRBState & SRB_XFERPAD) )
- {
- if( sstatus & (PARITY_ERR | ILLEGAL_OP_ERR) )
- pSRB->SRBStatus |= PARITY_ERROR;
-
- if( sstatus & COUNT_2_ZERO )
- {
- unsigned long timeout = jiffies + HZ;
-
- /* Function called from the ISR with the host_lock held and interrupts disabled */
- if (pSRB->SGToBeXferLen)
- while (time_before(jiffies, timeout) && !((dstate = DC390_read8 (DMA_Status)) & DMA_XFER_DONE)) {
- spin_unlock_irq(pACB->pScsiHost->host_lock);
- udelay(50);
- spin_lock_irq(pACB->pScsiHost->host_lock);
- }
- if (!time_before(jiffies, timeout))
- printk (KERN_CRIT "DC390: Deadlock in DataOut_0: DMA aborted unfinished: %06x bytes remain!!\n",
- DC390_read32 (DMA_Wk_ByteCntr));
- dc390_laststatus &= ~0xff000000;
- dc390_laststatus |= dstate << 24;
- pSRB->TotalXferredLen += pSRB->SGToBeXferLen;
- pSRB->SGIndex++;
- if( pSRB->SGIndex < pSRB->SGcount )
- {
- pSRB->pSegmentList++;
-
- dc390_start_segment(pSRB);
- }
- else
- pSRB->SGToBeXferLen = 0;
- }
- else
- {
- ResidCnt = ((u32) DC390_read8 (Current_Fifo) & 0x1f) +
- (((u32) DC390_read8 (CtcReg_High) << 16) |
- ((u32) DC390_read8 (CtcReg_Mid) << 8) |
- (u32) DC390_read8 (CtcReg_Low));
-
- dc390_advance_segment(pSRB, ResidCnt);
- }
- }
- if ((*psstatus & 7) != SCSI_DATA_OUT)
- {
- DC390_write8 (DMA_Cmd, WRITE_DIRECTION+DMA_IDLE_CMD);
- DC390_write8 (ScsiCmd, CLEAR_FIFO_CMD);
- }
-}
-
-static void
-dc390_DataIn_0(struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus)
-{
- u8 sstatus, residual, bval;
- u32 ResidCnt, i;
- unsigned long xferCnt;
-
- sstatus = *psstatus;
-
- if( !(pSRB->SRBState & SRB_XFERPAD) )
- {
- if( sstatus & (PARITY_ERR | ILLEGAL_OP_ERR))
- pSRB->SRBStatus |= PARITY_ERROR;
-
- if( sstatus & COUNT_2_ZERO )
- {
- int dstate = 0;
- unsigned long timeout = jiffies + HZ;
-
- /* Function called from the ISR with the host_lock held and interrupts disabled */
- if (pSRB->SGToBeXferLen)
- while (time_before(jiffies, timeout) && !((dstate = DC390_read8 (DMA_Status)) & DMA_XFER_DONE)) {
- spin_unlock_irq(pACB->pScsiHost->host_lock);
- udelay(50);
- spin_lock_irq(pACB->pScsiHost->host_lock);
- }
- if (!time_before(jiffies, timeout)) {
- printk (KERN_CRIT "DC390: Deadlock in DataIn_0: DMA aborted unfinished: %06x bytes remain!!\n",
- DC390_read32 (DMA_Wk_ByteCntr));
- printk (KERN_CRIT "DC390: DataIn_0: DMA State: %i\n", dstate);
- }
- dc390_laststatus &= ~0xff000000;
- dc390_laststatus |= dstate << 24;
- DEBUG1(ResidCnt = ((unsigned long) DC390_read8 (CtcReg_High) << 16) \
- + ((unsigned long) DC390_read8 (CtcReg_Mid) << 8) \
- + ((unsigned long) DC390_read8 (CtcReg_Low)));
- DEBUG1(printk (KERN_DEBUG "Count_2_Zero (ResidCnt=%u,ToBeXfer=%lu),", ResidCnt, pSRB->SGToBeXferLen));
-
- DC390_write8 (DMA_Cmd, READ_DIRECTION+DMA_IDLE_CMD);
-
- pSRB->TotalXferredLen += pSRB->SGToBeXferLen;
- pSRB->SGIndex++;
- if( pSRB->SGIndex < pSRB->SGcount )
- {
- pSRB->pSegmentList++;
-
- dc390_start_segment(pSRB);
- }
- else
- pSRB->SGToBeXferLen = 0;
- }
- else /* phase changed */
- {
- residual = 0;
- bval = DC390_read8 (Current_Fifo);
- while( bval & 0x1f )
- {
- DEBUG1(printk (KERN_DEBUG "Check for residuals,"));
- if( (bval & 0x1f) == 1 )
- {
- for(i=0; i < 0x100; i++)
- {
- bval = DC390_read8 (Current_Fifo);
- if( !(bval & 0x1f) )
- goto din_1;
- else if( i == 0x0ff )
- {
- residual = 1; /* ;1 residual byte */
- goto din_1;
- }
- }
- }
- else
- bval = DC390_read8 (Current_Fifo);
- }
-din_1:
- DC390_write8 (DMA_Cmd, READ_DIRECTION+DMA_BLAST_CMD);
- for (i = 0xa000; i; i--)
- {
- bval = DC390_read8 (DMA_Status);
- if (bval & BLAST_COMPLETE)
- break;
- }
- /* It seems a DMA Blast abort isn't that bad ... */
- if (!i) printk (KERN_ERR "DC390: DMA Blast aborted unfinished!\n");
- //DC390_write8 (DMA_Cmd, READ_DIRECTION+DMA_IDLE_CMD);
- dc390_laststatus &= ~0xff000000;
- dc390_laststatus |= bval << 24;
-
- DEBUG1(printk (KERN_DEBUG "Blast: Read %i times DMA_Status %02x", 0xa000-i, bval));
- ResidCnt = (((u32) DC390_read8 (CtcReg_High) << 16) |
- ((u32) DC390_read8 (CtcReg_Mid) << 8)) |
- (u32) DC390_read8 (CtcReg_Low);
-
- xferCnt = dc390_advance_segment(pSRB, ResidCnt);
-
- if (residual) {
- size_t count = 1;
- size_t offset = pSRB->SGBusAddr - sg_dma_address(pSRB->pSegmentList);
- unsigned long flags;
- u8 *ptr;
-
- bval = DC390_read8 (ScsiFifo); /* get one residual byte */
-
- local_irq_save(flags);
- ptr = scsi_kmap_atomic_sg(pSRB->pSegmentList, pSRB->SGcount, &offset, &count);
- if (likely(ptr)) {
- *(ptr + offset) = bval;
- scsi_kunmap_atomic_sg(ptr);
- }
- local_irq_restore(flags);
- WARN_ON(!ptr);
-
- /* 1 more byte read */
- xferCnt += dc390_advance_segment(pSRB, pSRB->SGToBeXferLen - 1);
- }
- DEBUG1(printk (KERN_DEBUG "Xfered: %lu, Total: %lu, Remaining: %lu\n", xferCnt,\
- pSRB->TotalXferredLen, pSRB->SGToBeXferLen));
- }
- }
- if ((*psstatus & 7) != SCSI_DATA_IN)
- {
- DC390_write8 (ScsiCmd, CLEAR_FIFO_CMD);
- DC390_write8 (DMA_Cmd, READ_DIRECTION+DMA_IDLE_CMD);
- }
-}
-
-static void
-dc390_Command_0( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus)
-{
-}
-
-static void
-dc390_Status_0( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus)
-{
-
- pSRB->TargetStatus = DC390_read8 (ScsiFifo);
- //udelay (1);
- pSRB->EndMessage = DC390_read8 (ScsiFifo); /* get message */
-
- *psstatus = SCSI_NOP0;
- pSRB->SRBState = SRB_COMPLETED;
- DC390_write8 (ScsiCmd, MSG_ACCEPTED_CMD);
-}
-
-static void
-dc390_MsgOut_0( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus)
-{
- if( pSRB->SRBState & (SRB_UNEXPECT_RESEL+SRB_ABORT_SENT) )
- *psstatus = SCSI_NOP0;
- //DC390_write8 (DMA_Cmd, DMA_IDLE_CMD);
-}
-
-
-static void __inline__
-dc390_reprog (struct dc390_acb* pACB, struct dc390_dcb* pDCB)
-{
- DC390_write8 (Sync_Period, pDCB->SyncPeriod);
- DC390_write8 (Sync_Offset, pDCB->SyncOffset);
- DC390_write8 (CtrlReg3, pDCB->CtrlR3);
- DC390_write8 (CtrlReg4, pDCB->CtrlR4);
- dc390_SetXferRate (pACB, pDCB);
-}
-
-
-#ifdef DC390_DEBUG0
-static void
-dc390_printMsg (u8 *MsgBuf, u8 len)
-{
- int i;
- printk (" %02x", MsgBuf[0]);
- for (i = 1; i < len; i++)
- printk (" %02x", MsgBuf[i]);
- printk ("\n");
-}
-#endif
-
-#define DC390_ENABLE_MSGOUT DC390_write8 (ScsiCmd, SET_ATN_CMD)
-
-/* reject_msg */
-static void __inline__
-dc390_MsgIn_reject (struct dc390_acb* pACB, struct dc390_srb* pSRB)
-{
- pSRB->MsgOutBuf[0] = MESSAGE_REJECT;
- pSRB->MsgCnt = 1;
- DC390_ENABLE_MSGOUT;
- DEBUG0 (printk (KERN_INFO "DC390: Reject message\n"));
-}
-
-/* abort command */
-static void
-dc390_EnableMsgOut_Abort ( struct dc390_acb* pACB, struct dc390_srb* pSRB )
-{
- pSRB->MsgOutBuf[0] = ABORT;
- pSRB->MsgCnt = 1; DC390_ENABLE_MSGOUT;
- pSRB->pSRBDCB->DCBFlag &= ~ABORT_DEV_;
-}
-
-static struct dc390_srb*
-dc390_MsgIn_QTag (struct dc390_acb* pACB, struct dc390_dcb* pDCB, s8 tag)
-{
- struct dc390_srb* pSRB = pDCB->pGoingSRB;
-
- if (pSRB)
- {
- struct scsi_cmnd *scmd = scsi_find_tag(pSRB->pcmd->device, tag);
- pSRB = (struct dc390_srb *)scmd->host_scribble;
-
- if (pDCB->DCBFlag & ABORT_DEV_)
- {
- pSRB->SRBState = SRB_ABORT_SENT;
- dc390_EnableMsgOut_Abort( pACB, pSRB );
- }
-
- if (!(pSRB->SRBState & SRB_DISCONNECT))
- goto mingx0;
-
- pDCB->pActiveSRB = pSRB;
- pSRB->SRBState = SRB_DATA_XFER;
- }
- else
- {
- mingx0:
- pSRB = pACB->pTmpSRB;
- pSRB->SRBState = SRB_UNEXPECT_RESEL;
- pDCB->pActiveSRB = pSRB;
- pSRB->MsgOutBuf[0] = ABORT_TAG;
- pSRB->MsgCnt = 1; DC390_ENABLE_MSGOUT;
- }
- return pSRB;
-}
-
-
-/* set async transfer mode */
-static void
-dc390_MsgIn_set_async (struct dc390_acb* pACB, struct dc390_srb* pSRB)
-{
- struct dc390_dcb* pDCB = pSRB->pSRBDCB;
- if (!(pSRB->SRBState & DO_SYNC_NEGO))
- printk (KERN_INFO "DC390: Target %i initiates Non-Sync?\n", pDCB->TargetID);
- pSRB->SRBState &= ~DO_SYNC_NEGO;
- pDCB->SyncMode &= ~(SYNC_ENABLE+SYNC_NEGO_DONE);
- pDCB->SyncPeriod = 0;
- pDCB->SyncOffset = 0;
- //pDCB->NegoPeriod = 50; /* 200ns <=> 5 MHz */
- pDCB->CtrlR3 = FAST_CLK; /* fast clock / normal scsi */
- pDCB->CtrlR4 &= 0x3f;
- pDCB->CtrlR4 |= pACB->glitch_cfg; /* glitch eater */
- dc390_reprog (pACB, pDCB);
-}
-
-/* set sync transfer mode */
-static void
-dc390_MsgIn_set_sync (struct dc390_acb* pACB, struct dc390_srb* pSRB)
-{
- u8 bval;
- u16 wval, wval1;
- struct dc390_dcb* pDCB = pSRB->pSRBDCB;
- u8 oldsyncperiod = pDCB->SyncPeriod;
- u8 oldsyncoffset = pDCB->SyncOffset;
-
- if (!(pSRB->SRBState & DO_SYNC_NEGO))
- {
- printk (KERN_INFO "DC390: Target %i initiates Sync: %ins %i ... answer ...\n",
- pDCB->TargetID, pSRB->MsgInBuf[3]<<2, pSRB->MsgInBuf[4]);
-
- /* reject */
- //dc390_MsgIn_reject (pACB, pSRB);
- //return dc390_MsgIn_set_async (pACB, pSRB);
-
- /* Reply with corrected SDTR Message */
- if (pSRB->MsgInBuf[4] > 15)
- {
- printk (KERN_INFO "DC390: Lower Sync Offset to 15\n");
- pSRB->MsgInBuf[4] = 15;
- }
- if (pSRB->MsgInBuf[3] < pDCB->NegoPeriod)
- {
- printk (KERN_INFO "DC390: Set sync nego period to %ins\n", pDCB->NegoPeriod << 2);
- pSRB->MsgInBuf[3] = pDCB->NegoPeriod;
- }
- memcpy (pSRB->MsgOutBuf, pSRB->MsgInBuf, 5);
- pSRB->MsgCnt = 5;
- DC390_ENABLE_MSGOUT;
- }
-
- pSRB->SRBState &= ~DO_SYNC_NEGO;
- pDCB->SyncMode |= SYNC_ENABLE+SYNC_NEGO_DONE;
- pDCB->SyncOffset &= 0x0f0;
- pDCB->SyncOffset |= pSRB->MsgInBuf[4];
- pDCB->NegoPeriod = pSRB->MsgInBuf[3];
-
- wval = (u16) pSRB->MsgInBuf[3];
- wval = wval << 2; wval -= 3; wval1 = wval / 25; /* compute speed */
- if( (wval1 * 25) != wval) wval1++;
- bval = FAST_CLK+FAST_SCSI; /* fast clock / fast scsi */
-
- pDCB->CtrlR4 &= 0x3f; /* Glitch eater: 12ns less than normal */
- if (pACB->glitch_cfg != NS_TO_GLITCH(0))
- pDCB->CtrlR4 |= NS_TO_GLITCH(((GLITCH_TO_NS(pACB->glitch_cfg)) - 1));
- else
- pDCB->CtrlR4 |= NS_TO_GLITCH(0);
- if (wval1 < 4) pDCB->CtrlR4 |= NS_TO_GLITCH(0); /* Ultra */
-
- if (wval1 >= 8)
- {
- wval1--; /* Timing computation differs by 1 from FAST_SCSI */
- bval = FAST_CLK; /* fast clock / normal scsi */
- pDCB->CtrlR4 |= pACB->glitch_cfg; /* glitch eater */
- }
-
- pDCB->CtrlR3 = bval;
- pDCB->SyncPeriod = (u8)wval1;
-
- if ((oldsyncperiod != wval1 || oldsyncoffset != pDCB->SyncOffset) && pDCB->TargetLUN == 0)
- {
- if (! (bval & FAST_SCSI)) wval1++;
- printk (KERN_INFO "DC390: Target %i: Sync transfer %i.%1i MHz, Offset %i\n", pDCB->TargetID,
- 40/wval1, ((40%wval1)*10+wval1/2)/wval1, pDCB->SyncOffset & 0x0f);
- }
-
- dc390_reprog (pACB, pDCB);
-}
-
-
-/* handle RESTORE_PTR */
-/* This doesn't look very healthy... to-be-fixed */
-static void
-dc390_restore_ptr (struct dc390_acb* pACB, struct dc390_srb* pSRB)
-{
- struct scsi_cmnd *pcmd = pSRB->pcmd;
- struct scatterlist *psgl;
- pSRB->TotalXferredLen = 0;
- pSRB->SGIndex = 0;
- if (scsi_sg_count(pcmd)) {
- size_t saved;
- pSRB->pSegmentList = scsi_sglist(pcmd);
- psgl = pSRB->pSegmentList;
- //dc390_pci_sync(pSRB);
-
- while (pSRB->TotalXferredLen + (unsigned long) sg_dma_len(psgl) < pSRB->Saved_Ptr)
- {
- pSRB->TotalXferredLen += (unsigned long) sg_dma_len(psgl);
- pSRB->SGIndex++;
- if( pSRB->SGIndex < pSRB->SGcount )
- {
- pSRB->pSegmentList++;
-
- dc390_start_segment(pSRB);
- }
- else
- pSRB->SGToBeXferLen = 0;
- }
-
- saved = pSRB->Saved_Ptr - pSRB->TotalXferredLen;
- pSRB->SGToBeXferLen -= saved;
- pSRB->SGBusAddr += saved;
- printk (KERN_INFO "DC390: Pointer restored. Segment %i, Total %li, Bus %08lx\n",
- pSRB->SGIndex, pSRB->Saved_Ptr, pSRB->SGBusAddr);
-
- } else {
- pSRB->SGcount = 0;
- printk (KERN_INFO "DC390: RESTORE_PTR message for Transfer without Scatter-Gather ??\n");
- }
-
- pSRB->TotalXferredLen = pSRB->Saved_Ptr;
-}
-
-
-/* According to the docs, the AM53C974 reads the message and
- * generates a Successful Operation IRQ before asserting ACK for
- * the last byte (how does it know whether it's the last ?) */
-/* The old code handled it in another way, indicating, that on
- * every message byte an IRQ is generated and every byte has to
- * be manually ACKed. Hmmm ? (KG, 98/11/28) */
-/* The old implementation was correct. Sigh! */
-
-/* Check if the message is complete */
-static u8 __inline__
-dc390_MsgIn_complete (u8 *msgbuf, u32 len)
-{
- if (*msgbuf == EXTENDED_MESSAGE)
- {
- if (len < 2) return 0;
- if (len < msgbuf[1] + 2) return 0;
- }
- else if (*msgbuf >= 0x20 && *msgbuf <= 0x2f) // two byte messages
- if (len < 2) return 0;
- return 1;
-}
-
-
-
-/* read and eval received messages */
-static void
-dc390_MsgIn_0( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus)
-{
- struct dc390_dcb* pDCB = pACB->pActiveDCB;
-
- /* Read the msg */
-
- pSRB->MsgInBuf[pACB->MsgLen++] = DC390_read8 (ScsiFifo);
- //pSRB->SRBState = 0;
-
- /* Msg complete ? */
- if (dc390_MsgIn_complete (pSRB->MsgInBuf, pACB->MsgLen))
- {
- DEBUG0 (printk (KERN_INFO "DC390: MsgIn:"); dc390_printMsg (pSRB->MsgInBuf, pACB->MsgLen));
- /* Now eval the msg */
- switch (pSRB->MsgInBuf[0])
- {
- case DISCONNECT:
- pSRB->SRBState = SRB_DISCONNECT; break;
-
- case SIMPLE_QUEUE_TAG:
- case HEAD_OF_QUEUE_TAG:
- case ORDERED_QUEUE_TAG:
- pSRB = dc390_MsgIn_QTag (pACB, pDCB, pSRB->MsgInBuf[1]);
- break;
-
- case MESSAGE_REJECT:
- DC390_write8 (ScsiCmd, RESET_ATN_CMD);
- pDCB->NegoPeriod = 50; /* 200ns <=> 5 MHz */
- if( pSRB->SRBState & DO_SYNC_NEGO)
- dc390_MsgIn_set_async (pACB, pSRB);
- break;
-
- case EXTENDED_MESSAGE:
- /* reject every extended msg but SDTR */
- if (pSRB->MsgInBuf[1] != 3 || pSRB->MsgInBuf[2] != EXTENDED_SDTR)
- dc390_MsgIn_reject (pACB, pSRB);
- else
- {
- if (pSRB->MsgInBuf[3] == 0 || pSRB->MsgInBuf[4] == 0)
- dc390_MsgIn_set_async (pACB, pSRB);
- else
- dc390_MsgIn_set_sync (pACB, pSRB);
- }
-
- // nothing has to be done
- case COMMAND_COMPLETE: break;
-
- // SAVE POINTER may be ignored as we have the struct dc390_srb* associated with the
- // scsi command. Thanks, Gerard, for pointing it out.
- case SAVE_POINTERS:
- pSRB->Saved_Ptr = pSRB->TotalXferredLen;
- break;
- // The device might want to restart transfer with a RESTORE
- case RESTORE_POINTERS:
- DEBUG0(printk ("DC390: RESTORE POINTER message received ... try to handle\n"));
- dc390_restore_ptr (pACB, pSRB);
- break;
-
- // reject unknown messages
- default: dc390_MsgIn_reject (pACB, pSRB);
- }
-
- /* Clear counter and MsgIn state */
- pSRB->SRBState &= ~SRB_MSGIN;
- pACB->MsgLen = 0;
- }
-
- *psstatus = SCSI_NOP0;
- DC390_write8 (ScsiCmd, MSG_ACCEPTED_CMD);
- //DC390_write8 (DMA_Cmd, DMA_IDLE_CMD);
-}
-
-
-static void
-dc390_DataIO_Comm( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 ioDir)
-{
- unsigned long lval;
- struct dc390_dcb* pDCB = pACB->pActiveDCB;
-
- if (pSRB == pACB->pTmpSRB)
- {
- if (pDCB)
- printk(KERN_ERR "DC390: pSRB == pTmpSRB! (TagQ Error?) (%02i-%i)\n", pDCB->TargetID, pDCB->TargetLUN);
- else
- printk(KERN_ERR "DC390: pSRB == pTmpSRB! (TagQ Error?) (DCB 0!)\n");
-
- /* Try to recover - some broken disks react badly to tagged INQUIRY */
- if (pDCB && pACB->scan_devices && pDCB->GoingSRBCnt == 1) {
- pSRB = pDCB->pGoingSRB;
- pDCB->pActiveSRB = pSRB;
- } else {
- pSRB->pSRBDCB = pDCB;
- dc390_EnableMsgOut_Abort(pACB, pSRB);
- if (pDCB)
- pDCB->DCBFlag |= ABORT_DEV;
- return;
- }
- }
-
- if( pSRB->SGIndex < pSRB->SGcount )
- {
- DC390_write8 (DMA_Cmd, DMA_IDLE_CMD | ioDir);
- if( !pSRB->SGToBeXferLen )
- {
- dc390_start_segment(pSRB);
-
- DEBUG1(printk (KERN_DEBUG " DC390: Next SG segment."));
- }
- lval = pSRB->SGToBeXferLen;
- DEBUG1(printk (KERN_DEBUG " DC390: Start transfer: %li bytes (address %08lx)\n", lval, pSRB->SGBusAddr));
- DC390_write8 (CtcReg_Low, (u8) lval);
- lval >>= 8;
- DC390_write8 (CtcReg_Mid, (u8) lval);
- lval >>= 8;
- DC390_write8 (CtcReg_High, (u8) lval);
-
- DC390_write32 (DMA_XferCnt, pSRB->SGToBeXferLen);
- DC390_write32 (DMA_XferAddr, pSRB->SGBusAddr);
-
- //DC390_write8 (DMA_Cmd, DMA_IDLE_CMD | ioDir);
- pSRB->SRBState = SRB_DATA_XFER;
-
- DC390_write8 (ScsiCmd, DMA_COMMAND+INFO_XFER_CMD);
-
- DC390_write8 (DMA_Cmd, DMA_START_CMD | ioDir);
- //DEBUG1(DC390_write32 (DMA_ScsiBusCtrl, WRT_ERASE_DMA_STAT | EN_INT_ON_PCI_ABORT));
- //DEBUG1(printk (KERN_DEBUG "DC390: DMA_Status: %02x\n", DC390_read8 (DMA_Status)));
- //DEBUG1(DC390_write32 (DMA_ScsiBusCtrl, EN_INT_ON_PCI_ABORT));
- }
- else /* xfer pad */
- {
- if( pSRB->SGcount )
- {
- pSRB->AdaptStatus = H_OVER_UNDER_RUN;
- pSRB->SRBStatus |= OVER_RUN;
- DEBUG0(printk (KERN_WARNING " DC390: Overrun -"));
- }
- DEBUG0(printk (KERN_WARNING " Clear transfer pad \n"));
- DC390_write8 (CtcReg_Low, 0);
- DC390_write8 (CtcReg_Mid, 0);
- DC390_write8 (CtcReg_High, 0);
-
- pSRB->SRBState |= SRB_XFERPAD;
- DC390_write8 (ScsiCmd, DMA_COMMAND+XFER_PAD_BYTE);
-/*
- DC390_write8 (DMA_Cmd, DMA_IDLE_CMD | ioDir);
- DC390_write8 (DMA_Cmd, DMA_START_CMD | ioDir);
-*/
- }
-}
-
-
-static void
-dc390_DataOutPhase( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus)
-{
- dc390_DataIO_Comm (pACB, pSRB, WRITE_DIRECTION);
-}
-
-static void
-dc390_DataInPhase( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus)
-{
- dc390_DataIO_Comm (pACB, pSRB, READ_DIRECTION);
-}
-
-static void
-dc390_CommandPhase( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus)
-{
- struct dc390_dcb* pDCB;
- u8 i, cnt;
- u8 *ptr;
-
- DC390_write8 (ScsiCmd, RESET_ATN_CMD);
- DC390_write8 (ScsiCmd, CLEAR_FIFO_CMD);
- if( !(pSRB->SRBFlag & AUTO_REQSENSE) )
- {
- cnt = (u8) pSRB->pcmd->cmd_len;
- ptr = (u8 *) pSRB->pcmd->cmnd;
- for(i=0; i < cnt; i++)
- DC390_write8 (ScsiFifo, *(ptr++));
- }
- else
- {
- DC390_write8 (ScsiFifo, REQUEST_SENSE);
- pDCB = pACB->pActiveDCB;
- DC390_write8 (ScsiFifo, pDCB->TargetLUN << 5);
- DC390_write8 (ScsiFifo, 0);
- DC390_write8 (ScsiFifo, 0);
- DC390_write8 (ScsiFifo, SCSI_SENSE_BUFFERSIZE);
- DC390_write8 (ScsiFifo, 0);
- DEBUG0(printk(KERN_DEBUG "DC390: AutoReqSense (CmndPhase)!\n"));
- }
- pSRB->SRBState = SRB_COMMAND;
- DC390_write8 (ScsiCmd, INFO_XFER_CMD);
-}
-
-static void
-dc390_StatusPhase( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus)
-{
- DC390_write8 (ScsiCmd, CLEAR_FIFO_CMD);
- pSRB->SRBState = SRB_STATUS;
- DC390_write8 (ScsiCmd, INITIATOR_CMD_CMPLTE);
- //DC390_write8 (DMA_Cmd, DMA_IDLE_CMD);
-}
-
-static void
-dc390_MsgOutPhase( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus)
-{
- u8 bval, i, cnt;
- u8 *ptr;
- struct dc390_dcb* pDCB;
-
- DC390_write8 (ScsiCmd, CLEAR_FIFO_CMD);
- pDCB = pACB->pActiveDCB;
- if( !(pSRB->SRBState & SRB_MSGOUT) )
- {
- cnt = pSRB->MsgCnt;
- if( cnt )
- {
- ptr = (u8 *) pSRB->MsgOutBuf;
- for(i=0; i < cnt; i++)
- DC390_write8 (ScsiFifo, *(ptr++));
- pSRB->MsgCnt = 0;
- if( (pDCB->DCBFlag & ABORT_DEV_) &&
- (pSRB->MsgOutBuf[0] == ABORT) )
- pSRB->SRBState = SRB_ABORT_SENT;
- }
- else
- {
- bval = ABORT; /* ??? MSG_NOP */
- if( (pSRB->pcmd->cmnd[0] == INQUIRY ) ||
- (pSRB->pcmd->cmnd[0] == REQUEST_SENSE) ||
- (pSRB->SRBFlag & AUTO_REQSENSE) )
- {
- if( pDCB->SyncMode & SYNC_ENABLE )
- goto mop1;
- }
- DC390_write8 (ScsiFifo, bval);
- }
- DC390_write8 (ScsiCmd, INFO_XFER_CMD);
- }
- else
- {
-mop1:
- printk (KERN_ERR "DC390: OLD Sync Nego code triggered! (%i %i)\n", pDCB->TargetID, pDCB->TargetLUN);
- DC390_write8 (ScsiFifo, EXTENDED_MESSAGE);
- DC390_write8 (ScsiFifo, 3); /* ;length of extended msg */
- DC390_write8 (ScsiFifo, EXTENDED_SDTR); /* ; sync nego */
- DC390_write8 (ScsiFifo, pDCB->NegoPeriod);
- if (pDCB->SyncOffset & 0x0f)
- DC390_write8 (ScsiFifo, pDCB->SyncOffset);
- else
- DC390_write8 (ScsiFifo, SYNC_NEGO_OFFSET);
- pSRB->SRBState |= DO_SYNC_NEGO;
- DC390_write8 (ScsiCmd, INFO_XFER_CMD);
- }
-}
-
-static void
-dc390_MsgInPhase( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus)
-{
- DC390_write8 (ScsiCmd, CLEAR_FIFO_CMD);
- if( !(pSRB->SRBState & SRB_MSGIN) )
- {
- pSRB->SRBState &= ~SRB_DISCONNECT;
- pSRB->SRBState |= SRB_MSGIN;
- }
- DC390_write8 (ScsiCmd, INFO_XFER_CMD);
- //DC390_write8 (DMA_Cmd, DMA_IDLE_CMD);
-}
-
-static void
-dc390_Nop_0( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus)
-{
-}
-
-static void
-dc390_Nop_1( struct dc390_acb* pACB, struct dc390_srb* pSRB, u8 *psstatus)
-{
-}
-
-
-static void
-dc390_SetXferRate( struct dc390_acb* pACB, struct dc390_dcb* pDCB )
-{
- u8 bval, i, cnt;
- struct dc390_dcb* ptr;
-
- if( !(pDCB->TargetLUN) )
- {
- if( !pACB->scan_devices )
- {
- ptr = pACB->pLinkDCB;
- cnt = pACB->DCBCnt;
- bval = pDCB->TargetID;
- for(i=0; i<cnt; i++)
- {
- if( ptr->TargetID == bval )
- {
- ptr->SyncPeriod = pDCB->SyncPeriod;
- ptr->SyncOffset = pDCB->SyncOffset;
- ptr->CtrlR3 = pDCB->CtrlR3;
- ptr->CtrlR4 = pDCB->CtrlR4;
- ptr->SyncMode = pDCB->SyncMode;
- }
- ptr = ptr->pNextDCB;
- }
- }
- }
- return;
-}
-
-
-static void
-dc390_Disconnect( struct dc390_acb* pACB )
-{
- struct dc390_dcb *pDCB;
- struct dc390_srb *pSRB, *psrb;
- u8 i, cnt;
-
- DEBUG0(printk(KERN_INFO "DISC,"));
-
- if (!pACB->Connected) printk(KERN_ERR "DC390: Disconnect not-connected bus?\n");
- pACB->Connected = 0;
- pDCB = pACB->pActiveDCB;
- if (!pDCB)
- {
- DEBUG0(printk(KERN_ERR "ACB:%p->ActiveDCB:%p IOPort:%04x IRQ:%02x !\n",\
- pACB, pDCB, pACB->IOPortBase, pACB->IRQLevel));
- mdelay(400);
- DC390_read8 (INT_Status); /* Reset Pending INT */
- DC390_write8 (ScsiCmd, EN_SEL_RESEL);
- return;
- }
- DC390_write8 (ScsiCmd, EN_SEL_RESEL);
- pSRB = pDCB->pActiveSRB;
- pACB->pActiveDCB = NULL;
- pSRB->ScsiPhase = SCSI_NOP0;
- if( pSRB->SRBState & SRB_UNEXPECT_RESEL )
- pSRB->SRBState = 0;
- else if( pSRB->SRBState & SRB_ABORT_SENT )
- {
- pDCB->TagMask = 0;
- pDCB->DCBFlag = 0;
- cnt = pDCB->GoingSRBCnt;
- pDCB->GoingSRBCnt = 0;
- pSRB = pDCB->pGoingSRB;
- for( i=0; i < cnt; i++)
- {
- psrb = pSRB->pNextSRB;
- dc390_Free_insert (pACB, pSRB);
- pSRB = psrb;
- }
- pDCB->pGoingSRB = NULL;
- }
- else
- {
- if( (pSRB->SRBState & (SRB_START_+SRB_MSGOUT)) ||
- !(pSRB->SRBState & (SRB_DISCONNECT+SRB_COMPLETED)) )
- { /* Selection time out */
- pSRB->AdaptStatus = H_SEL_TIMEOUT;
- pSRB->TargetStatus = 0;
- goto disc1;
- }
- else if (!(pSRB->SRBState & SRB_DISCONNECT) && (pSRB->SRBState & SRB_COMPLETED))
- {
-disc1:
- dc390_freetag (pDCB, pSRB);
- pDCB->pActiveSRB = NULL;
- pSRB->SRBState = SRB_FREE;
- dc390_SRBdone( pACB, pDCB, pSRB);
- }
- }
- pACB->MsgLen = 0;
-}
-
-
-static void
-dc390_Reselect( struct dc390_acb* pACB )
-{
- struct dc390_dcb* pDCB;
- struct dc390_srb* pSRB;
- u8 id, lun;
-
- DEBUG0(printk(KERN_INFO "RSEL,"));
- pACB->Connected = 1;
- pDCB = pACB->pActiveDCB;
- if( pDCB )
- { /* Arbitration lost but Reselection won */
- DEBUG0(printk ("DC390: (ActiveDCB != 0: Arb. lost but resel. won)!\n"));
- pSRB = pDCB->pActiveSRB;
- if( !( pACB->scan_devices ) )
- {
- struct scsi_cmnd *pcmd = pSRB->pcmd;
- scsi_set_resid(pcmd, scsi_bufflen(pcmd));
- SET_RES_DID(pcmd->result, DID_SOFT_ERROR);
- dc390_Going_remove(pDCB, pSRB);
- dc390_Free_insert(pACB, pSRB);
- pcmd->scsi_done (pcmd);
- DEBUG0(printk(KERN_DEBUG"DC390: Return SRB %p to free\n", pSRB));
- }
- }
- /* Get ID */
- lun = DC390_read8 (ScsiFifo);
- DEBUG0(printk ("Dev %02x,", lun));
- if (!(lun & (1 << pACB->pScsiHost->this_id)))
- printk (KERN_ERR "DC390: Reselection must select host adapter: %02x!\n", lun);
- else
- lun ^= 1 << pACB->pScsiHost->this_id; /* Mask AdapterID */
- id = 0; while (lun >>= 1) id++;
- /* Get LUN */
- lun = DC390_read8 (ScsiFifo);
- if (!(lun & IDENTIFY_BASE)) printk (KERN_ERR "DC390: Resel: Expect identify message!\n");
- lun &= 7;
- DEBUG0(printk ("(%02i-%i),", id, lun));
- pDCB = dc390_findDCB (pACB, id, lun);
- if (!pDCB)
- {
- printk (KERN_ERR "DC390: Reselect from non existing device (%02i-%i)\n",
- id, lun);
- return;
- }
- pACB->pActiveDCB = pDCB;
- /* TagQ: We expect a message soon, so never mind the exact SRB */
- if( pDCB->SyncMode & EN_TAG_QUEUEING )
- {
- pSRB = pACB->pTmpSRB;
- pDCB->pActiveSRB = pSRB;
- }
- else
- {
- pSRB = pDCB->pActiveSRB;
- if( !pSRB || !(pSRB->SRBState & SRB_DISCONNECT) )
- {
- pSRB= pACB->pTmpSRB;
- pSRB->SRBState = SRB_UNEXPECT_RESEL;
- printk (KERN_ERR "DC390: Reselect without outstanding cmnd (%02i-%i)\n",
- id, lun);
- pDCB->pActiveSRB = pSRB;
- dc390_EnableMsgOut_Abort ( pACB, pSRB );
- }
- else
- {
- if( pDCB->DCBFlag & ABORT_DEV_ )
- {
- pSRB->SRBState = SRB_ABORT_SENT;
- printk (KERN_INFO "DC390: Reselect: Abort (%02i-%i)\n",
- id, lun);
- dc390_EnableMsgOut_Abort( pACB, pSRB );
- }
- else
- pSRB->SRBState = SRB_DATA_XFER;
- }
- }
-
- DEBUG1(printk (KERN_DEBUG "Resel SRB(%p): TagNum (%02x)\n", pSRB, pSRB->TagNumber));
- pSRB->ScsiPhase = SCSI_NOP0;
- DC390_write8 (Scsi_Dest_ID, pDCB->TargetID);
- DC390_write8 (Sync_Period, pDCB->SyncPeriod);
- DC390_write8 (Sync_Offset, pDCB->SyncOffset);
- DC390_write8 (CtrlReg1, pDCB->CtrlR1);
- DC390_write8 (CtrlReg3, pDCB->CtrlR3);
- DC390_write8 (CtrlReg4, pDCB->CtrlR4); /* ; Glitch eater */
- DC390_write8 (ScsiCmd, MSG_ACCEPTED_CMD); /* ;to release the /ACK signal */
-}
-
-static int __inline__
-dc390_RequestSense(struct dc390_acb* pACB, struct dc390_dcb* pDCB, struct dc390_srb* pSRB)
-{
- struct scsi_cmnd *pcmd;
-
- pcmd = pSRB->pcmd;
-
- REMOVABLEDEBUG(printk(KERN_INFO "DC390: RequestSense(Cmd %02x, Id %02x, LUN %02x)\n",\
- pcmd->cmnd[0], pDCB->TargetID, pDCB->TargetLUN));
-
- pSRB->SRBFlag |= AUTO_REQSENSE;
- pSRB->SavedTotXLen = pSRB->TotalXferredLen;
- pSRB->AdaptStatus = 0;
- pSRB->TargetStatus = 0; /* CHECK_CONDITION<<1; */
-
- /* We are called from SRBdone, original PCI mapping has been removed
- * already, new one is set up from StartSCSI */
- pSRB->SGIndex = 0;
-
- pSRB->TotalXferredLen = 0;
- pSRB->SGToBeXferLen = 0;
- return dc390_StartSCSI(pACB, pDCB, pSRB);
-}
-
-
-static void
-dc390_SRBdone( struct dc390_acb* pACB, struct dc390_dcb* pDCB, struct dc390_srb* pSRB )
-{
- u8 status;
- struct scsi_cmnd *pcmd;
-
- pcmd = pSRB->pcmd;
- /* KG: Moved pci_unmap here */
- dc390_pci_unmap(pSRB);
-
- status = pSRB->TargetStatus;
-
- DEBUG0(printk (" SRBdone (%02x,%08x), SRB %p\n", status, pcmd->result, pSRB));
- if(pSRB->SRBFlag & AUTO_REQSENSE)
- { /* Last command was a Request Sense */
- pSRB->SRBFlag &= ~AUTO_REQSENSE;
- pSRB->AdaptStatus = 0;
- pSRB->TargetStatus = SAM_STAT_CHECK_CONDITION;
-
- //pcmd->result = MK_RES(DRIVER_SENSE,DID_OK,0,status);
- if (status == SAM_STAT_CHECK_CONDITION)
- pcmd->result = MK_RES_LNX(0, DID_BAD_TARGET, 0, /*CHECK_CONDITION*/0);
- else /* Retry */
- {
- if( pSRB->pcmd->cmnd[0] == TEST_UNIT_READY /* || pSRB->pcmd->cmnd[0] == START_STOP */)
- {
- /* Don't retry on TEST_UNIT_READY */
- pcmd->result = MK_RES_LNX(DRIVER_SENSE, DID_OK, 0, SAM_STAT_CHECK_CONDITION);
- REMOVABLEDEBUG(printk(KERN_INFO "Cmd=%02x, Result=%08x, XferL=%08x\n",pSRB->pcmd->cmnd[0],\
- (u32) pcmd->result, (u32) pSRB->TotalXferredLen));
- } else {
- SET_RES_DRV(pcmd->result, DRIVER_SENSE);
- //pSRB->ScsiCmdLen = (u8) (pSRB->Segment1[0] >> 8);
- DEBUG0 (printk ("DC390: RETRY (%02x), target %02i-%02i\n", pcmd->cmnd[0], pcmd->device->id, (u8)pcmd->device->lun));
- pSRB->TotalXferredLen = 0;
- SET_RES_DID(pcmd->result, DID_SOFT_ERROR);
- }
- }
- goto cmd_done;
- }
- if( status )
- {
- if (status == SAM_STAT_CHECK_CONDITION)
- {
- if (dc390_RequestSense(pACB, pDCB, pSRB)) {
- SET_RES_DID(pcmd->result, DID_ERROR);
- goto cmd_done;
- }
- return;
- }
- else if (status == SAM_STAT_TASK_SET_FULL)
- {
- scsi_track_queue_full(pcmd->device, pDCB->GoingSRBCnt - 1);
- DEBUG0 (printk ("DC390: RETRY (%02x), target %02i-%02i\n", pcmd->cmnd[0], pcmd->device->id, (u8)pcmd->device->lun));
- pSRB->TotalXferredLen = 0;
- SET_RES_DID(pcmd->result, DID_SOFT_ERROR);
- }
- else if (status == SAM_STAT_BUSY &&
- (pcmd->cmnd[0] == TEST_UNIT_READY || pcmd->cmnd[0] == INQUIRY) &&
- pACB->scan_devices)
- {
- pSRB->AdaptStatus = 0;
- pSRB->TargetStatus = status;
- pcmd->result = MK_RES(0,0,pSRB->EndMessage,/*status*/0);
- }
- else
- { /* Another error */
- pSRB->TotalXferredLen = 0;
- SET_RES_DID(pcmd->result, DID_SOFT_ERROR);
- goto cmd_done;
- }
- }
- else
- { /* Target status == 0 */
- status = pSRB->AdaptStatus;
- if (status == H_OVER_UNDER_RUN)
- {
- pSRB->TargetStatus = 0;
- SET_RES_DID(pcmd->result,DID_OK);
- SET_RES_MSG(pcmd->result,pSRB->EndMessage);
- }
- else if (status == H_SEL_TIMEOUT)
- {
- pcmd->result = MK_RES(0, DID_NO_CONNECT, 0, 0);
- /* Devices are removed below ... */
- }
- else if( pSRB->SRBStatus & PARITY_ERROR)
- {
- //pcmd->result = MK_RES(0,DID_PARITY,pSRB->EndMessage,0);
- SET_RES_DID(pcmd->result,DID_PARITY);
- SET_RES_MSG(pcmd->result,pSRB->EndMessage);
- }
- else /* No error */
- {
- pSRB->AdaptStatus = 0;
- pSRB->TargetStatus = 0;
- SET_RES_DID(pcmd->result,DID_OK);
- }
- }
-
-cmd_done:
- scsi_set_resid(pcmd, scsi_bufflen(pcmd) - pSRB->TotalXferredLen);
-
- dc390_Going_remove (pDCB, pSRB);
- /* Add to free list */
- dc390_Free_insert (pACB, pSRB);
-
- DEBUG0(printk (KERN_DEBUG "DC390: SRBdone: done\n"));
- pcmd->scsi_done (pcmd);
-
- return;
-}
-
-
-/* Remove all SRBs from Going list and inform midlevel */
-static void
-dc390_DoingSRB_Done(struct dc390_acb* pACB, struct scsi_cmnd *cmd)
-{
- struct dc390_dcb *pDCB, *pdcb;
- struct dc390_srb *psrb, *psrb2;
- int i;
- struct scsi_cmnd *pcmd;
-
- pDCB = pACB->pLinkDCB;
- pdcb = pDCB;
- if (! pdcb) return;
- do
- {
- psrb = pdcb->pGoingSRB;
- for (i = 0; i < pdcb->GoingSRBCnt; i++)
- {
- psrb2 = psrb->pNextSRB;
- pcmd = psrb->pcmd;
- dc390_Free_insert (pACB, psrb);
- psrb = psrb2;
- }
- pdcb->GoingSRBCnt = 0;
- pdcb->pGoingSRB = NULL;
- pdcb->TagMask = 0;
- pdcb = pdcb->pNextDCB;
- } while( pdcb != pDCB );
-}
-
-
-static void
-dc390_ResetSCSIBus( struct dc390_acb* pACB )
-{
- //DC390_write8 (ScsiCmd, RST_DEVICE_CMD);
- //udelay (250);
- //DC390_write8 (ScsiCmd, NOP_CMD);
-
- DC390_write8 (ScsiCmd, CLEAR_FIFO_CMD);
- DC390_write8 (DMA_Cmd, DMA_IDLE_CMD);
- DC390_write8 (ScsiCmd, RST_SCSI_BUS_CMD);
- pACB->Connected = 0;
-
- return;
-}
-
-static void
-dc390_ScsiRstDetect( struct dc390_acb* pACB )
-{
- printk ("DC390: Rst_Detect: laststat = %08x\n", dc390_laststatus);
- //DEBUG0(printk(KERN_INFO "RST_DETECT,"));
-
- DC390_write8 (DMA_Cmd, DMA_IDLE_CMD);
- /* Unlock before ? */
- /* delay half a second */
- udelay (1000);
- DC390_write8 (ScsiCmd, CLEAR_FIFO_CMD);
- pACB->last_reset = jiffies + 5*HZ/2
- + HZ * dc390_eepromBuf[pACB->AdapterIndex][EE_DELAY];
- pACB->Connected = 0;
-
- if( pACB->ACBFlag & RESET_DEV )
- pACB->ACBFlag |= RESET_DONE;
- else
- { /* Reset was issued by sb else */
- pACB->ACBFlag |= RESET_DETECT;
-
- dc390_ResetDevParam( pACB );
- dc390_DoingSRB_Done( pACB, NULL);
- //dc390_RecoverSRB( pACB );
- pACB->pActiveDCB = NULL;
- pACB->ACBFlag = 0;
- }
- return;
-}
-
-static int DC390_queuecommand_lck(struct scsi_cmnd *cmd,
- void (*done)(struct scsi_cmnd *))
-{
- struct scsi_device *sdev = cmd->device;
- struct dc390_acb *acb = (struct dc390_acb *)sdev->host->hostdata;
- struct dc390_dcb *dcb = sdev->hostdata;
- struct dc390_srb *srb;
-
- if (sdev->queue_depth <= dcb->GoingSRBCnt)
- goto device_busy;
- if (acb->pActiveDCB)
- goto host_busy;
- if (acb->ACBFlag & (RESET_DETECT|RESET_DONE|RESET_DEV))
- goto host_busy;
-
- srb = acb->pFreeSRB;
- if (unlikely(srb == NULL))
- goto host_busy;
-
- cmd->scsi_done = done;
- cmd->result = 0;
- acb->Cmds++;
-
- acb->pFreeSRB = srb->pNextSRB;
- srb->pNextSRB = NULL;
-
- srb->pSRBDCB = dcb;
- srb->pcmd = cmd;
- cmd->host_scribble = (char *)srb;
-
- srb->SGIndex = 0;
- srb->AdaptStatus = 0;
- srb->TargetStatus = 0;
- srb->MsgCnt = 0;
-
- srb->SRBStatus = 0;
- srb->SRBFlag = 0;
- srb->SRBState = 0;
- srb->TotalXferredLen = 0;
- srb->SGBusAddr = 0;
- srb->SGToBeXferLen = 0;
- srb->ScsiPhase = 0;
- srb->EndMessage = 0;
- srb->TagNumber = SCSI_NO_TAG;
-
- if (dc390_StartSCSI(acb, dcb, srb)) {
- dc390_Free_insert(acb, srb);
- goto host_busy;
- }
-
- dc390_Going_append(dcb, srb);
-
- return 0;
-
- host_busy:
- return SCSI_MLQUEUE_HOST_BUSY;
-
- device_busy:
- return SCSI_MLQUEUE_DEVICE_BUSY;
-}
-
-static DEF_SCSI_QCMD(DC390_queuecommand)
-
-static void dc390_dumpinfo (struct dc390_acb* pACB, struct dc390_dcb* pDCB, struct dc390_srb* pSRB)
-{
- struct pci_dev *pdev;
- u16 pstat;
-
- if (!pDCB) pDCB = pACB->pActiveDCB;
- if (!pSRB && pDCB) pSRB = pDCB->pActiveSRB;
-
- if (pSRB)
- {
- printk ("DC390: SRB: Xferred %08lx, Remain %08lx, State %08x, Phase %02x\n",
- pSRB->TotalXferredLen, pSRB->SGToBeXferLen, pSRB->SRBState,
- pSRB->ScsiPhase);
- printk ("DC390: AdpaterStatus: %02x, SRB Status %02x\n", pSRB->AdaptStatus, pSRB->SRBStatus);
- }
- printk ("DC390: Status of last IRQ (DMA/SC/Int/IRQ): %08x\n", dc390_laststatus);
- printk ("DC390: Register dump: SCSI block:\n");
- printk ("DC390: XferCnt Cmd Stat IntS IRQS FFIS Ctl1 Ctl2 Ctl3 Ctl4\n");
- printk ("DC390: %06x %02x %02x %02x",
- DC390_read8(CtcReg_Low) + (DC390_read8(CtcReg_Mid) << 8) + (DC390_read8(CtcReg_High) << 16),
- DC390_read8(ScsiCmd), DC390_read8(Scsi_Status), DC390_read8(Intern_State));
- printk (" %02x %02x %02x %02x %02x %02x\n",
- DC390_read8(INT_Status), DC390_read8(Current_Fifo), DC390_read8(CtrlReg1),
- DC390_read8(CtrlReg2), DC390_read8(CtrlReg3), DC390_read8(CtrlReg4));
- DC390_write32 (DMA_ScsiBusCtrl, WRT_ERASE_DMA_STAT | EN_INT_ON_PCI_ABORT);
- if (DC390_read8(Current_Fifo) & 0x1f)
- {
- printk ("DC390: FIFO:");
- while (DC390_read8(Current_Fifo) & 0x1f) printk (" %02x", DC390_read8(ScsiFifo));
- printk ("\n");
- }
- printk ("DC390: Register dump: DMA engine:\n");
- printk ("DC390: Cmd STrCnt SBusA WrkBC WrkAC Stat SBusCtrl\n");
- printk ("DC390: %02x %08x %08x %08x %08x %02x %08x\n",
- DC390_read8(DMA_Cmd), DC390_read32(DMA_XferCnt), DC390_read32(DMA_XferAddr),
- DC390_read32(DMA_Wk_ByteCntr), DC390_read32(DMA_Wk_AddrCntr),
- DC390_read8(DMA_Status), DC390_read32(DMA_ScsiBusCtrl));
- DC390_write32 (DMA_ScsiBusCtrl, EN_INT_ON_PCI_ABORT);
-
- pdev = pACB->pdev;
- pci_read_config_word(pdev, PCI_STATUS, &pstat);
- printk ("DC390: Register dump: PCI Status: %04x\n", pstat);
- printk ("DC390: In case of driver trouble read Documentation/scsi/tmscsim.txt\n");
-}
-
-
-static int DC390_abort(struct scsi_cmnd *cmd)
-{
- struct dc390_acb *pACB = (struct dc390_acb*) cmd->device->host->hostdata;
- struct dc390_dcb *pDCB = (struct dc390_dcb*) cmd->device->hostdata;
-
- scmd_printk(KERN_WARNING, cmd, "DC390: Abort command\n");
-
- /* abort() is too stupid for already sent commands at the moment.
- * If it's called we are in trouble anyway, so let's dump some info
- * into the syslog at least. (KG, 98/08/20,99/06/20) */
- dc390_dumpinfo(pACB, pDCB, NULL);
-
- pDCB->DCBFlag |= ABORT_DEV_;
- printk(KERN_INFO "DC390: Aborted.\n");
-
- return FAILED;
-}
-
-
-static void dc390_ResetDevParam( struct dc390_acb* pACB )
-{
- struct dc390_dcb *pDCB, *pdcb;
-
- pDCB = pACB->pLinkDCB;
- if (! pDCB) return;
- pdcb = pDCB;
- do
- {
- pDCB->SyncMode &= ~SYNC_NEGO_DONE;
- pDCB->SyncPeriod = 0;
- pDCB->SyncOffset = 0;
- pDCB->TagMask = 0;
- pDCB->CtrlR3 = FAST_CLK;
- pDCB->CtrlR4 &= NEGATE_REQACKDATA | CTRL4_RESERVED | NEGATE_REQACK;
- pDCB->CtrlR4 |= pACB->glitch_cfg;
- pDCB = pDCB->pNextDCB;
- }
- while( pdcb != pDCB );
- pACB->ACBFlag &= ~(RESET_DEV | RESET_DONE | RESET_DETECT);
-
-}
-
-static int DC390_bus_reset (struct scsi_cmnd *cmd)
-{
- struct dc390_acb* pACB = (struct dc390_acb*) cmd->device->host->hostdata;
- u8 bval;
-
- spin_lock_irq(cmd->device->host->host_lock);
-
- bval = DC390_read8(CtrlReg1) | DIS_INT_ON_SCSI_RST;
- DC390_write8(CtrlReg1, bval); /* disable IRQ on bus reset */
-
- pACB->ACBFlag |= RESET_DEV;
- dc390_ResetSCSIBus(pACB);
-
- dc390_ResetDevParam(pACB);
- mdelay(1);
- pACB->last_reset = jiffies + 3*HZ/2
- + HZ * dc390_eepromBuf[pACB->AdapterIndex][EE_DELAY];
-
- DC390_write8(ScsiCmd, CLEAR_FIFO_CMD);
- DC390_read8(INT_Status); /* Reset Pending INT */
-
- dc390_DoingSRB_Done(pACB, cmd);
-
- pACB->pActiveDCB = NULL;
- pACB->ACBFlag = 0;
-
- bval = DC390_read8(CtrlReg1) & ~DIS_INT_ON_SCSI_RST;
- DC390_write8(CtrlReg1, bval); /* re-enable interrupt */
-
- spin_unlock_irq(cmd->device->host->host_lock);
-
- return SUCCESS;
-}
-
-/**
- * dc390_slave_alloc - Called by the scsi mid layer to tell us about a new
- * scsi device that we need to deal with.
- *
- * @scsi_device: The new scsi device that we need to handle.
- */
-static int dc390_slave_alloc(struct scsi_device *scsi_device)
-{
- struct dc390_acb *pACB = (struct dc390_acb*) scsi_device->host->hostdata;
- struct dc390_dcb *pDCB, *pDCB2 = NULL;
- uint id = scsi_device->id;
- uint lun = scsi_device->lun;
-
- pDCB = kzalloc(sizeof(struct dc390_dcb), GFP_KERNEL);
- if (!pDCB)
- return -ENOMEM;
-
- if (!pACB->DCBCnt++) {
- pACB->pLinkDCB = pDCB;
- pACB->pDCBRunRobin = pDCB;
- } else {
- pACB->pLastDCB->pNextDCB = pDCB;
- }
-
- pDCB->pNextDCB = pACB->pLinkDCB;
- pACB->pLastDCB = pDCB;
-
- pDCB->pDCBACB = pACB;
- pDCB->TargetID = id;
- pDCB->TargetLUN = lun;
-
- /*
- * Some values are for all LUNs: Copy them
- * In a clean way: We would have an own structure for a SCSI-ID
- */
- if (lun && (pDCB2 = dc390_findDCB(pACB, id, 0))) {
- pDCB->DevMode = pDCB2->DevMode;
- pDCB->SyncMode = pDCB2->SyncMode & SYNC_NEGO_DONE;
- pDCB->SyncPeriod = pDCB2->SyncPeriod;
- pDCB->SyncOffset = pDCB2->SyncOffset;
- pDCB->NegoPeriod = pDCB2->NegoPeriod;
-
- pDCB->CtrlR3 = pDCB2->CtrlR3;
- pDCB->CtrlR4 = pDCB2->CtrlR4;
- } else {
- u8 index = pACB->AdapterIndex;
- PEEprom prom = (PEEprom) &dc390_eepromBuf[index][id << 2];
-
- pDCB->DevMode = prom->EE_MODE1;
- pDCB->NegoPeriod =
- (dc390_clock_period1[prom->EE_SPEED] * 25) >> 2;
- pDCB->CtrlR3 = FAST_CLK;
- pDCB->CtrlR4 = pACB->glitch_cfg | CTRL4_RESERVED;
- if (dc390_eepromBuf[index][EE_MODE2] & ACTIVE_NEGATION)
- pDCB->CtrlR4 |= NEGATE_REQACKDATA | NEGATE_REQACK;
- }
-
- if (pDCB->DevMode & SYNC_NEGO_)
- pDCB->SyncMode |= SYNC_ENABLE;
- else {
- pDCB->SyncMode = 0;
- pDCB->SyncOffset &= ~0x0f;
- }
-
- pDCB->CtrlR1 = pACB->pScsiHost->this_id;
- if (pDCB->DevMode & PARITY_CHK_)
- pDCB->CtrlR1 |= PARITY_ERR_REPO;
-
- pACB->scan_devices = 1;
- scsi_device->hostdata = pDCB;
- return 0;
-}
-
-/**
- * dc390_slave_destroy - Called by the scsi mid layer to tell us about a
- * device that is going away.
- *
- * @scsi_device: The scsi device that we need to remove.
- */
-static void dc390_slave_destroy(struct scsi_device *scsi_device)
-{
- struct dc390_acb* pACB = (struct dc390_acb*) scsi_device->host->hostdata;
- struct dc390_dcb* pDCB = (struct dc390_dcb*) scsi_device->hostdata;
- struct dc390_dcb* pPrevDCB = pACB->pLinkDCB;
-
- pACB->scan_devices = 0;
-
- BUG_ON(pDCB->GoingSRBCnt > 1);
-
- if (pDCB == pACB->pLinkDCB) {
- if (pACB->pLastDCB == pDCB) {
- pDCB->pNextDCB = NULL;
- pACB->pLastDCB = NULL;
- }
- pACB->pLinkDCB = pDCB->pNextDCB;
- } else {
- while (pPrevDCB->pNextDCB != pDCB)
- pPrevDCB = pPrevDCB->pNextDCB;
- pPrevDCB->pNextDCB = pDCB->pNextDCB;
- if (pDCB == pACB->pLastDCB)
- pACB->pLastDCB = pPrevDCB;
- }
-
- if (pDCB == pACB->pActiveDCB)
- pACB->pActiveDCB = NULL;
- if (pDCB == pACB->pLinkDCB)
- pACB->pLinkDCB = pDCB->pNextDCB;
- if (pDCB == pACB->pDCBRunRobin)
- pACB->pDCBRunRobin = pDCB->pNextDCB;
- kfree(pDCB);
-
- pACB->DCBCnt--;
-}
-
-static int dc390_slave_configure(struct scsi_device *sdev)
-{
- struct dc390_acb *acb = (struct dc390_acb *)sdev->host->hostdata;
- struct dc390_dcb *dcb = (struct dc390_dcb *)sdev->hostdata;
-
- acb->scan_devices = 0;
- if (sdev->tagged_supported && (dcb->DevMode & TAG_QUEUEING_)) {
- dcb->SyncMode |= EN_TAG_QUEUEING;
- scsi_activate_tcq(sdev, acb->TagMaxNum);
- }
-
- return 0;
-}
-
-static struct scsi_host_template driver_template = {
- .module = THIS_MODULE,
- .proc_name = "tmscsim",
- .name = DC390_BANNER " V" DC390_VERSION,
- .slave_alloc = dc390_slave_alloc,
- .slave_configure = dc390_slave_configure,
- .slave_destroy = dc390_slave_destroy,
- .queuecommand = DC390_queuecommand,
- .eh_abort_handler = DC390_abort,
- .eh_bus_reset_handler = DC390_bus_reset,
- .can_queue = 1,
- .this_id = 7,
- .sg_tablesize = SG_ALL,
- .cmd_per_lun = 1,
- .use_clustering = ENABLE_CLUSTERING,
- .max_sectors = 0x4000, /* 8MiB = 16 * 1024 * 512 */
-};
-
-/***********************************************************************
- * Functions for access to DC390 EEPROM
- * and some to emulate it
- *
- **********************************************************************/
-
-static void dc390_eeprom_prepare_read(struct pci_dev *pdev, u8 cmd)
-{
- u8 carryFlag = 1, j = 0x80, bval;
- int i;
-
- for (i = 0; i < 9; i++) {
- if (carryFlag) {
- pci_write_config_byte(pdev, 0x80, 0x40);
- bval = 0xc0;
- } else
- bval = 0x80;
-
- udelay(160);
- pci_write_config_byte(pdev, 0x80, bval);
- udelay(160);
- pci_write_config_byte(pdev, 0x80, 0);
- udelay(160);
-
- carryFlag = (cmd & j) ? 1 : 0;
- j >>= 1;
- }
-}
-
-static u16 dc390_eeprom_get_data(struct pci_dev *pdev)
-{
- int i;
- u16 wval = 0;
- u8 bval;
-
- for (i = 0; i < 16; i++) {
- wval <<= 1;
-
- pci_write_config_byte(pdev, 0x80, 0x80);
- udelay(160);
- pci_write_config_byte(pdev, 0x80, 0x40);
- udelay(160);
- pci_read_config_byte(pdev, 0x00, &bval);
-
- if (bval == 0x22)
- wval |= 1;
- }
-
- return wval;
-}
-
-static void dc390_read_eeprom(struct pci_dev *pdev, u16 *ptr)
-{
- u8 cmd = EEPROM_READ, i;
-
- for (i = 0; i < 0x40; i++) {
- pci_write_config_byte(pdev, 0xc0, 0);
- udelay(160);
-
- dc390_eeprom_prepare_read(pdev, cmd++);
- *ptr++ = dc390_eeprom_get_data(pdev);
-
- pci_write_config_byte(pdev, 0x80, 0);
- pci_write_config_byte(pdev, 0x80, 0);
- udelay(160);
- }
-}
-
-/* Override EEprom values with explicitly set values */
-static void dc390_eeprom_override(u8 index)
-{
- u8 *ptr = (u8 *) dc390_eepromBuf[index], id;
-
- /* Adapter Settings */
- if (tmscsim[0] != -2)
- ptr[EE_ADAPT_SCSI_ID] = (u8)tmscsim[0]; /* Adapter ID */
- if (tmscsim[3] != -2)
- ptr[EE_MODE2] = (u8)tmscsim[3];
- if (tmscsim[5] != -2)
- ptr[EE_DELAY] = tmscsim[5]; /* Reset delay */
- if (tmscsim[4] != -2)
- ptr[EE_TAG_CMD_NUM] = (u8)tmscsim[4]; /* Tagged Cmds */
-
- /* Device Settings */
- for (id = 0; id < MAX_SCSI_ID; id++) {
- if (tmscsim[2] != -2)
- ptr[id << 2] = (u8)tmscsim[2]; /* EE_MODE1 */
- if (tmscsim[1] != -2)
- ptr[(id << 2) + 1] = (u8)tmscsim[1]; /* EE_Speed */
- }
-}
-
-static int tmscsim_def[] = {
- 7,
- 0 /* 10MHz */,
- PARITY_CHK_ | SEND_START_ | EN_DISCONNECT_ | SYNC_NEGO_ | TAG_QUEUEING_,
- MORE2_DRV | GREATER_1G | RST_SCSI_BUS | ACTIVE_NEGATION | LUN_CHECK,
- 3 /* 16 Tags per LUN */,
- 1 /* s delay after Reset */,
-};
-
-/* Copy defaults over set values where missing */
-static void dc390_fill_with_defaults (void)
-{
- int i;
-
- for (i = 0; i < 6; i++) {
- if (tmscsim[i] < 0 || tmscsim[i] > 255)
- tmscsim[i] = tmscsim_def[i];
- }
-
- /* Sanity checks */
- if (tmscsim[0] > 7)
- tmscsim[0] = 7;
- if (tmscsim[1] > 7)
- tmscsim[1] = 4;
- if (tmscsim[4] > 5)
- tmscsim[4] = 4;
- if (tmscsim[5] > 180)
- tmscsim[5] = 180;
-}
-
-static void dc390_check_eeprom(struct pci_dev *pdev, u8 index)
-{
- u8 interpd[] = {1, 3, 5, 10, 16, 30, 60, 120};
- u8 EEbuf[128];
- u16 *ptr = (u16 *)EEbuf, wval = 0;
- int i;
-
- dc390_read_eeprom(pdev, ptr);
- memcpy(dc390_eepromBuf[index], EEbuf, EE_ADAPT_SCSI_ID);
- memcpy(&dc390_eepromBuf[index][EE_ADAPT_SCSI_ID],
- &EEbuf[REAL_EE_ADAPT_SCSI_ID], EE_LEN - EE_ADAPT_SCSI_ID);
-
- dc390_eepromBuf[index][EE_DELAY] = interpd[dc390_eepromBuf[index][EE_DELAY]];
-
- for (i = 0; i < 0x40; i++, ptr++)
- wval += *ptr;
-
- /* no Tekram EEprom found */
- if (wval != 0x1234) {
- int speed;
-
- printk(KERN_INFO "DC390_init: No EEPROM found! Trying default settings ...\n");
-
- /*
- * XXX(hch): bogus, because we might have tekram and
- * non-tekram hbas in a single machine.
- */
- dc390_fill_with_defaults();
-
- speed = dc390_clock_speed[tmscsim[1]];
- printk(KERN_INFO "DC390: Used defaults: AdaptID=%i, SpeedIdx=%i (%i.%i MHz), "
- "DevMode=0x%02x, AdaptMode=0x%02x, TaggedCmnds=%i (%i), DelayReset=%is\n",
- tmscsim[0], tmscsim[1], speed / 10, speed % 10,
- (u8)tmscsim[2], (u8)tmscsim[3], tmscsim[4], 2 << (tmscsim[4]), tmscsim[5]);
- }
-}
-
-static void dc390_init_hw(struct dc390_acb *pACB, u8 index)
-{
- struct Scsi_Host *shost = pACB->pScsiHost;
- u8 dstate;
-
- /* Disable SCSI bus reset interrupt */
- DC390_write8(CtrlReg1, DIS_INT_ON_SCSI_RST | shost->this_id);
-
- if (pACB->Gmode2 & RST_SCSI_BUS) {
- dc390_ResetSCSIBus(pACB);
- udelay(1000);
- pACB->last_reset = jiffies + HZ/2 +
- HZ * dc390_eepromBuf[pACB->AdapterIndex][EE_DELAY];
- }
-
- pACB->ACBFlag = 0;
-
- /* Reset Pending INT */
- DC390_read8(INT_Status);
-
- /* 250ms selection timeout */
- DC390_write8(Scsi_TimeOut, SEL_TIMEOUT);
-
- /* Conversion factor = 0 , 40MHz clock */
- DC390_write8(Clk_Factor, CLK_FREQ_40MHZ);
-
- /* NOP cmd - clear command register */
- DC390_write8(ScsiCmd, NOP_CMD);
-
- /* Enable Feature and SCSI-2 */
- DC390_write8(CtrlReg2, EN_FEATURE+EN_SCSI2_CMD);
-
- /* Fast clock */
- DC390_write8(CtrlReg3, FAST_CLK);
-
- /* Negation */
- DC390_write8(CtrlReg4, pACB->glitch_cfg | /* glitch eater */
- (dc390_eepromBuf[index][EE_MODE2] & ACTIVE_NEGATION) ?
- NEGATE_REQACKDATA : 0);
-
- /* Clear Transfer Count High: ID */
- DC390_write8(CtcReg_High, 0);
- DC390_write8(DMA_Cmd, DMA_IDLE_CMD);
- DC390_write8(ScsiCmd, CLEAR_FIFO_CMD);
- DC390_write32(DMA_ScsiBusCtrl, EN_INT_ON_PCI_ABORT);
-
- dstate = DC390_read8(DMA_Status);
- DC390_write8(DMA_Status, dstate);
-}
-
-static int dc390_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
-{
- struct dc390_acb *pACB;
- struct Scsi_Host *shost;
- unsigned long io_port;
- int error = -ENODEV, i;
-
- if (pci_enable_device(pdev))
- goto out;
-
- pci_set_master(pdev);
-
- error = -ENOMEM;
- if (disable_clustering)
- driver_template.use_clustering = DISABLE_CLUSTERING;
- shost = scsi_host_alloc(&driver_template, sizeof(struct dc390_acb));
- if (!shost)
- goto out_disable_device;
-
- pACB = (struct dc390_acb *)shost->hostdata;
- memset(pACB, 0, sizeof(struct dc390_acb));
-
- dc390_check_eeprom(pdev, dc390_adapterCnt);
- dc390_eeprom_override(dc390_adapterCnt);
-
- io_port = pci_resource_start(pdev, 0);
-
- shost->this_id = dc390_eepromBuf[dc390_adapterCnt][EE_ADAPT_SCSI_ID];
- shost->io_port = io_port;
- shost->n_io_port = 0x80;
- shost->irq = pdev->irq;
- shost->base = io_port;
- shost->unique_id = io_port;
-
- pACB->last_reset = jiffies;
- pACB->pScsiHost = shost;
- pACB->IOPortBase = (u16) io_port;
- pACB->IRQLevel = pdev->irq;
-
- shost->max_id = 8;
-
- if (shost->max_id - 1 ==
- dc390_eepromBuf[dc390_adapterCnt][EE_ADAPT_SCSI_ID])
- shost->max_id--;
-
- if (dc390_eepromBuf[dc390_adapterCnt][EE_MODE2] & LUN_CHECK)
- shost->max_lun = 8;
- else
- shost->max_lun = 1;
-
- pACB->pFreeSRB = pACB->SRB_array;
- pACB->SRBCount = MAX_SRB_CNT;
- pACB->AdapterIndex = dc390_adapterCnt;
- pACB->TagMaxNum =
- 2 << dc390_eepromBuf[dc390_adapterCnt][EE_TAG_CMD_NUM];
- pACB->Gmode2 = dc390_eepromBuf[dc390_adapterCnt][EE_MODE2];
-
- for (i = 0; i < pACB->SRBCount-1; i++)
- pACB->SRB_array[i].pNextSRB = &pACB->SRB_array[i+1];
- pACB->SRB_array[pACB->SRBCount-1].pNextSRB = NULL;
- pACB->pTmpSRB = &pACB->TmpSRB;
-
- pACB->sel_timeout = SEL_TIMEOUT;
- pACB->glitch_cfg = EATER_25NS;
- pACB->pdev = pdev;
-
- if (!request_region(io_port, shost->n_io_port, "tmscsim")) {
- printk(KERN_ERR "DC390: register IO ports error!\n");
- goto out_host_put;
- }
-
- /* Reset Pending INT */
- DC390_read8_(INT_Status, io_port);
-
- if (request_irq(pdev->irq, do_DC390_Interrupt, IRQF_SHARED,
- "tmscsim", pACB)) {
- printk(KERN_ERR "DC390: register IRQ error!\n");
- goto out_release_region;
- }
-
- dc390_init_hw(pACB, dc390_adapterCnt);
-
- dc390_adapterCnt++;
-
- pci_set_drvdata(pdev, shost);
-
- error = scsi_add_host(shost, &pdev->dev);
- if (error)
- goto out_free_irq;
- scsi_scan_host(shost);
- return 0;
-
- out_free_irq:
- free_irq(pdev->irq, pACB);
- out_release_region:
- release_region(io_port, shost->n_io_port);
- out_host_put:
- scsi_host_put(shost);
- out_disable_device:
- pci_disable_device(pdev);
- out:
- return error;
-}
-
-/**
- * dc390_remove_one - Called to remove a single instance of the adapter.
- *
- * @dev: The PCI device to remove.
- */
-static void dc390_remove_one(struct pci_dev *dev)
-{
- struct Scsi_Host *scsi_host = pci_get_drvdata(dev);
- unsigned long iflags;
- struct dc390_acb* pACB = (struct dc390_acb*) scsi_host->hostdata;
- u8 bval;
-
- scsi_remove_host(scsi_host);
-
- spin_lock_irqsave(scsi_host->host_lock, iflags);
- pACB->ACBFlag = RESET_DEV;
- bval = DC390_read8(CtrlReg1) | DIS_INT_ON_SCSI_RST;
- DC390_write8 (CtrlReg1, bval); /* disable interrupt */
- if (pACB->Gmode2 & RST_SCSI_BUS)
- dc390_ResetSCSIBus(pACB);
- spin_unlock_irqrestore(scsi_host->host_lock, iflags);
-
- free_irq(scsi_host->irq, pACB);
- release_region(scsi_host->io_port, scsi_host->n_io_port);
-
- pci_disable_device(dev);
- scsi_host_put(scsi_host);
-}
-
-static struct pci_device_id tmscsim_pci_tbl[] = {
- { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD53C974,
- PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 },
- { }
-};
-MODULE_DEVICE_TABLE(pci, tmscsim_pci_tbl);
-
-static struct pci_driver dc390_driver = {
- .name = "tmscsim",
- .id_table = tmscsim_pci_tbl,
- .probe = dc390_probe_one,
- .remove = dc390_remove_one,
-};
-
-static int __init dc390_module_init(void)
-{
- if (!disable_clustering) {
- printk(KERN_INFO "DC390: clustering now enabled by default. If you get problems load\n");
- printk(KERN_INFO " with \"disable_clustering=1\" and report to maintainers\n");
- }
-
- if (tmscsim[0] == -1 || tmscsim[0] > 15) {
- tmscsim[0] = 7;
- tmscsim[1] = 4;
- tmscsim[2] = PARITY_CHK_ | TAG_QUEUEING_;
- tmscsim[3] = MORE2_DRV | GREATER_1G | RST_SCSI_BUS | ACTIVE_NEGATION;
- tmscsim[4] = 2;
- tmscsim[5] = 10;
- printk (KERN_INFO "DC390: Using safe settings.\n");
- }
-
- return pci_register_driver(&dc390_driver);
-}
-
-static void __exit dc390_module_exit(void)
-{
- pci_unregister_driver(&dc390_driver);
-}
-
-module_init(dc390_module_init);
-module_exit(dc390_module_exit);
-
-#ifndef MODULE
-static int __init dc390_setup (char *str)
-{
- int ints[8],i, im;
-
- get_options(str, ARRAY_SIZE(ints), ints);
- im = ints[0];
-
- if (im > 6) {
- printk (KERN_NOTICE "DC390: ignore extra params!\n");
- im = 6;
- }
-
- for (i = 0; i < im; i++)
- tmscsim[i] = ints[i+1];
- /* dc390_checkparams (); */
- return 1;
-}
-
-__setup("tmscsim=", dc390_setup);
-#endif
+++ /dev/null
-/***********************************************************************
-;* File Name : TMSCSIM.H *
-;* TEKRAM DC-390(T) PCI SCSI Bus Master Host Adapter *
-;* Device Driver *
-;***********************************************************************/
-/* $Id: tmscsim.h,v 2.15.2.3 2000/11/17 20:52:27 garloff Exp $ */
-
-#ifndef _TMSCSIM_H
-#define _TMSCSIM_H
-
-#include <linux/types.h>
-
-#define SCSI_IRQ_NONE 255
-
-#define MAX_ADAPTER_NUM 4
-#define MAX_SG_LIST_BUF 16 /* Not used */
-#define MAX_SCSI_ID 8
-#define MAX_SRB_CNT 50 /* Max number of started commands */
-
-#define SEL_TIMEOUT 153 /* 250 ms selection timeout (@ 40 MHz) */
-
-/*
-;-----------------------------------------------------------------------
-; SCSI Request Block
-;-----------------------------------------------------------------------
-*/
-struct dc390_srb
-{
-//u8 CmdBlock[12];
-
-struct dc390_srb *pNextSRB;
-struct dc390_dcb *pSRBDCB;
-struct scsi_cmnd *pcmd;
-struct scatterlist *pSegmentList;
-
-struct scatterlist Segmentx; /* make a one entry of S/G list table */
-
-unsigned long SGBusAddr; /*;a segment starting address as seen by AM53C974A
- in CPU endianness. We're only getting 32-bit bus
- addresses by default */
-unsigned long SGToBeXferLen; /*; to be xfer length */
-unsigned long TotalXferredLen;
-unsigned long SavedTotXLen;
-unsigned long Saved_Ptr;
-u32 SRBState;
-
-u8 SRBStatus;
-u8 SRBFlag; /*; b0-AutoReqSense,b6-Read,b7-write */
- /*; b4-settimeout,b5-Residual valid */
-u8 AdaptStatus;
-u8 TargetStatus;
-
-u8 ScsiPhase;
-s8 TagNumber;
-u8 SGIndex;
-u8 SGcount;
-
-u8 MsgCnt;
-u8 EndMessage;
-
-u8 MsgInBuf[6];
-u8 MsgOutBuf[6];
-
-//u8 IORBFlag; /*;81h-Reset, 2-retry */
-};
-
-
-/*
-;-----------------------------------------------------------------------
-; Device Control Block
-;-----------------------------------------------------------------------
-*/
-struct dc390_dcb
-{
-struct dc390_dcb *pNextDCB;
-struct dc390_acb *pDCBACB;
-
-/* Queued SRBs */
-struct dc390_srb *pGoingSRB;
-struct dc390_srb *pGoingLast;
-struct dc390_srb *pActiveSRB;
-u8 GoingSRBCnt;
-
-u32 TagMask;
-
-u8 TargetID; /*; SCSI Target ID (SCSI Only) */
-u8 TargetLUN; /*; SCSI Log. Unit (SCSI Only) */
-u8 DevMode;
-u8 DCBFlag;
-
-u8 CtrlR1;
-u8 CtrlR3;
-u8 CtrlR4;
-
-u8 SyncMode; /*; 0:async mode */
-u8 NegoPeriod; /*;for nego. */
-u8 SyncPeriod; /*;for reg. */
-u8 SyncOffset; /*;for reg. and nego.(low nibble) */
-};
-
-
-/*
-;-----------------------------------------------------------------------
-; Adapter Control Block
-;-----------------------------------------------------------------------
-*/
-struct dc390_acb
-{
-struct Scsi_Host *pScsiHost;
-u16 IOPortBase;
-u8 IRQLevel;
-u8 status;
-
-u8 SRBCount;
-u8 AdapterIndex; /*; nth Adapter this driver */
-u8 DCBCnt;
-
-u8 TagMaxNum;
-u8 ACBFlag;
-u8 Gmode2;
-u8 scan_devices;
-
-struct dc390_dcb *pLinkDCB;
-struct dc390_dcb *pLastDCB;
-struct dc390_dcb *pDCBRunRobin;
-
-struct dc390_dcb *pActiveDCB;
-struct dc390_srb *pFreeSRB;
-struct dc390_srb *pTmpSRB;
-
-u8 msgin123[4];
-u8 Connected;
-u8 pad;
-
-#if defined(USE_SPINLOCKS) && USE_SPINLOCKS > 1 && (defined(CONFIG_SMP) || DEBUG_SPINLOCKS > 0)
-spinlock_t lock;
-#endif
-u8 sel_timeout;
-u8 glitch_cfg;
-
-u8 MsgLen;
-u8 Ignore_IRQ; /* Not used */
-
-struct pci_dev *pdev;
-
-unsigned long last_reset;
-unsigned long Cmds;
-u32 SelLost;
-u32 SelConn;
-u32 CmdInQ;
-u32 CmdOutOfSRB;
-
-struct dc390_srb TmpSRB;
-struct dc390_srb SRB_array[MAX_SRB_CNT]; /* 50 SRBs */
-};
-
-
-/*;-----------------------------------------------------------------------*/
-
-
-#define BIT31 0x80000000
-#define BIT30 0x40000000
-#define BIT29 0x20000000
-#define BIT28 0x10000000
-#define BIT27 0x08000000
-#define BIT26 0x04000000
-#define BIT25 0x02000000
-#define BIT24 0x01000000
-#define BIT23 0x00800000
-#define BIT22 0x00400000
-#define BIT21 0x00200000
-#define BIT20 0x00100000
-#define BIT19 0x00080000
-#define BIT18 0x00040000
-#define BIT17 0x00020000
-#define BIT16 0x00010000
-#define BIT15 0x00008000
-#define BIT14 0x00004000
-#define BIT13 0x00002000
-#define BIT12 0x00001000
-#define BIT11 0x00000800
-#define BIT10 0x00000400
-#define BIT9 0x00000200
-#define BIT8 0x00000100
-#define BIT7 0x00000080
-#define BIT6 0x00000040
-#define BIT5 0x00000020
-#define BIT4 0x00000010
-#define BIT3 0x00000008
-#define BIT2 0x00000004
-#define BIT1 0x00000002
-#define BIT0 0x00000001
-
-/*;---UnitCtrlFlag */
-#define UNIT_ALLOCATED BIT0
-#define UNIT_INFO_CHANGED BIT1
-#define FORMATING_MEDIA BIT2
-#define UNIT_RETRY BIT3
-
-/*;---UnitFlags */
-#define DASD_SUPPORT BIT0
-#define SCSI_SUPPORT BIT1
-#define ASPI_SUPPORT BIT2
-
-/*;----SRBState machine definition */
-#define SRB_FREE 0
-#define SRB_WAIT BIT0
-#define SRB_READY BIT1
-#define SRB_MSGOUT BIT2 /*;arbitration+msg_out 1st byte*/
-#define SRB_MSGIN BIT3
-#define SRB_MSGIN_MULTI BIT4
-#define SRB_COMMAND BIT5
-#define SRB_START_ BIT6 /*;arbitration+msg_out+command_out*/
-#define SRB_DISCONNECT BIT7
-#define SRB_DATA_XFER BIT8
-#define SRB_XFERPAD BIT9
-#define SRB_STATUS BIT10
-#define SRB_COMPLETED BIT11
-#define SRB_ABORT_SENT BIT12
-#define DO_SYNC_NEGO BIT13
-#define SRB_UNEXPECT_RESEL BIT14
-
-/*;---SRBstatus */
-#define SRB_OK BIT0
-#define ABORTION BIT1
-#define OVER_RUN BIT2
-#define UNDER_RUN BIT3
-#define PARITY_ERROR BIT4
-#define SRB_ERROR BIT5
-
-/*;---ACBFlag */
-#define RESET_DEV BIT0
-#define RESET_DETECT BIT1
-#define RESET_DONE BIT2
-
-/*;---DCBFlag */
-#define ABORT_DEV_ BIT0
-
-/*;---SRBFlag */
-#define DATAOUT BIT7
-#define DATAIN BIT6
-#define RESIDUAL_VALID BIT5
-#define ENABLE_TIMER BIT4
-#define RESET_DEV0 BIT2
-#define ABORT_DEV BIT1
-#define AUTO_REQSENSE BIT0
-
-/*;---Adapter status */
-#define H_STATUS_GOOD 0
-#define H_SEL_TIMEOUT 0x11
-#define H_OVER_UNDER_RUN 0x12
-#define H_UNEXP_BUS_FREE 0x13
-#define H_TARGET_PHASE_F 0x14
-#define H_INVALID_CCB_OP 0x16
-#define H_LINK_CCB_BAD 0x17
-#define H_BAD_TARGET_DIR 0x18
-#define H_DUPLICATE_CCB 0x19
-#define H_BAD_CCB_OR_SG 0x1A
-#define H_ABORT 0x0FF
-
-/* cmd->result */
-#define RES_TARGET 0x000000FF /* Target State */
-#define RES_TARGET_LNX STATUS_MASK /* Only official ... */
-#define RES_ENDMSG 0x0000FF00 /* End Message */
-#define RES_DID 0x00FF0000 /* DID_ codes */
-#define RES_DRV 0xFF000000 /* DRIVER_ codes */
-
-#define MK_RES(drv,did,msg,tgt) ((int)(drv)<<24 | (int)(did)<<16 | (int)(msg)<<8 | (int)(tgt))
-#define MK_RES_LNX(drv,did,msg,tgt) ((int)(drv)<<24 | (int)(did)<<16 | (int)(msg)<<8 | (int)(tgt))
-
-#define SET_RES_TARGET(who, tgt) do { who &= ~RES_TARGET; who |= (int)(tgt); } while (0)
-#define SET_RES_TARGET_LNX(who, tgt) do { who &= ~RES_TARGET_LNX; who |= (int)(tgt) << 1; } while (0)
-#define SET_RES_MSG(who, msg) do { who &= ~RES_ENDMSG; who |= (int)(msg) << 8; } while (0)
-#define SET_RES_DID(who, did) do { who &= ~RES_DID; who |= (int)(did) << 16; } while (0)
-#define SET_RES_DRV(who, drv) do { who &= ~RES_DRV; who |= (int)(drv) << 24; } while (0)
-
-/*;---Sync_Mode */
-#define SYNC_DISABLE 0
-#define SYNC_ENABLE BIT0
-#define SYNC_NEGO_DONE BIT1
-#define WIDE_ENABLE BIT2 /* Not used ;-) */
-#define WIDE_NEGO_DONE BIT3 /* Not used ;-) */
-#define EN_TAG_QUEUEING BIT4
-#define EN_ATN_STOP BIT5
-
-#define SYNC_NEGO_OFFSET 15
-
-/*;---SCSI bus phase*/
-#define SCSI_DATA_OUT 0
-#define SCSI_DATA_IN 1
-#define SCSI_COMMAND 2
-#define SCSI_STATUS_ 3
-#define SCSI_NOP0 4
-#define SCSI_NOP1 5
-#define SCSI_MSG_OUT 6
-#define SCSI_MSG_IN 7
-
-/*;----SCSI MSG BYTE*/ /* see scsi/scsi.h */ /* One is missing ! */
-#define ABORT_TAG 0x0d
-
-/*
- * SISC query queue
- */
-typedef struct {
- dma_addr_t saved_dma_handle;
-} dc390_cmd_scp_t;
-
-/*
-;==========================================================
-; EEPROM byte offset
-;==========================================================
-*/
-typedef struct _EEprom
-{
-u8 EE_MODE1;
-u8 EE_SPEED;
-u8 xx1;
-u8 xx2;
-} EEprom, *PEEprom;
-
-#define REAL_EE_ADAPT_SCSI_ID 64
-#define REAL_EE_MODE2 65
-#define REAL_EE_DELAY 66
-#define REAL_EE_TAG_CMD_NUM 67
-
-#define EE_ADAPT_SCSI_ID 32
-#define EE_MODE2 33
-#define EE_DELAY 34
-#define EE_TAG_CMD_NUM 35
-
-#define EE_LEN 40
-
-/*; EE_MODE1 bits definition*/
-#define PARITY_CHK_ BIT0
-#define SYNC_NEGO_ BIT1
-#define EN_DISCONNECT_ BIT2
-#define SEND_START_ BIT3
-#define TAG_QUEUEING_ BIT4
-
-/*; EE_MODE2 bits definition*/
-#define MORE2_DRV BIT0
-#define GREATER_1G BIT1
-#define RST_SCSI_BUS BIT2
-#define ACTIVE_NEGATION BIT3
-#define NO_SEEK BIT4
-#define LUN_CHECK BIT5
-
-#define ENABLE_CE 1
-#define DISABLE_CE 0
-#define EEPROM_READ 0x80
-
-/*
-;==========================================================
-; AMD 53C974 Registers bit Definition
-;==========================================================
-*/
-/*
-;====================
-; SCSI Register
-;====================
-*/
-
-/*; Command Reg.(+0CH) (rw) */
-#define DMA_COMMAND BIT7
-#define NOP_CMD 0
-#define CLEAR_FIFO_CMD 1
-#define RST_DEVICE_CMD 2
-#define RST_SCSI_BUS_CMD 3
-
-#define INFO_XFER_CMD 0x10
-#define INITIATOR_CMD_CMPLTE 0x11
-#define MSG_ACCEPTED_CMD 0x12
-#define XFER_PAD_BYTE 0x18
-#define SET_ATN_CMD 0x1A
-#define RESET_ATN_CMD 0x1B
-
-#define SEL_WO_ATN 0x41 /* currently not used */
-#define SEL_W_ATN 0x42
-#define SEL_W_ATN_STOP 0x43
-#define SEL_W_ATN3 0x46
-#define EN_SEL_RESEL 0x44
-#define DIS_SEL_RESEL 0x45 /* currently not used */
-#define RESEL 0x40 /* " */
-#define RESEL_ATN3 0x47 /* " */
-
-#define DATA_XFER_CMD INFO_XFER_CMD
-
-
-/*; SCSI Status Reg.(+10H) (r) */
-#define INTERRUPT BIT7
-#define ILLEGAL_OP_ERR BIT6
-#define PARITY_ERR BIT5
-#define COUNT_2_ZERO BIT4
-#define GROUP_CODE_VALID BIT3
-#define SCSI_PHASE_MASK (BIT2+BIT1+BIT0)
-/* BIT2: MSG phase; BIT1: C/D physe; BIT0: I/O phase */
-
-/*; Interrupt Status Reg.(+14H) (r) */
-#define SCSI_RESET BIT7
-#define INVALID_CMD BIT6
-#define DISCONNECTED BIT5
-#define SERVICE_REQUEST BIT4
-#define SUCCESSFUL_OP BIT3
-#define RESELECTED BIT2
-#define SEL_ATTENTION BIT1
-#define SELECTED BIT0
-
-/*; Internal State Reg.(+18H) (r) */
-#define SYNC_OFFSET_FLAG BIT3
-#define INTRN_STATE_MASK (BIT2+BIT1+BIT0)
-/* 0x04: Sel. successful (w/o stop), 0x01: Sel. successful (w/ stop) */
-
-/*; Clock Factor Reg.(+24H) (w) */
-#define CLK_FREQ_40MHZ 0
-#define CLK_FREQ_35MHZ (BIT2+BIT1+BIT0)
-#define CLK_FREQ_30MHZ (BIT2+BIT1)
-#define CLK_FREQ_25MHZ (BIT2+BIT0)
-#define CLK_FREQ_20MHZ BIT2
-#define CLK_FREQ_15MHZ (BIT1+BIT0)
-#define CLK_FREQ_10MHZ BIT1
-
-/*; Control Reg. 1(+20H) (rw) */
-#define EXTENDED_TIMING BIT7
-#define DIS_INT_ON_SCSI_RST BIT6
-#define PARITY_ERR_REPO BIT4
-#define SCSI_ID_ON_BUS (BIT2+BIT1+BIT0) /* host adapter ID */
-
-/*; Control Reg. 2(+2CH) (rw) */
-#define EN_FEATURE BIT6
-#define EN_SCSI2_CMD BIT3
-
-/*; Control Reg. 3(+30H) (rw) */
-#define ID_MSG_CHECK BIT7
-#define EN_QTAG_MSG BIT6
-#define EN_GRP2_CMD BIT5
-#define FAST_SCSI BIT4 /* ;10MB/SEC */
-#define FAST_CLK BIT3 /* ;25 - 40 MHZ */
-
-/*; Control Reg. 4(+34H) (rw) */
-#define EATER_12NS 0
-#define EATER_25NS BIT7
-#define EATER_35NS BIT6
-#define EATER_0NS (BIT7+BIT6)
-#define REDUCED_POWER BIT5
-#define CTRL4_RESERVED BIT4 /* must be 1 acc. to AM53C974.c */
-#define NEGATE_REQACKDATA BIT2
-#define NEGATE_REQACK BIT3
-
-#define GLITCH_TO_NS(x) (((~x>>6 & 2) >> 1) | ((x>>6 & 1) << 1 ^ (x>>6 & 2)))
-#define NS_TO_GLITCH(y) (((~y<<7) | ~((y<<6) ^ ((y<<5 & 1<<6) | ~0x40))) & 0xc0)
-
-/*
-;====================
-; DMA Register
-;====================
-*/
-/*; DMA Command Reg.(+40H) (rw) */
-#define READ_DIRECTION BIT7
-#define WRITE_DIRECTION 0
-#define EN_DMA_INT BIT6
-#define EN_PAGE_INT BIT5 /* page transfer interrupt enable */
-#define MAP_TO_MDL BIT4
-#define DIAGNOSTIC BIT2
-#define DMA_IDLE_CMD 0
-#define DMA_BLAST_CMD BIT0
-#define DMA_ABORT_CMD BIT1
-#define DMA_START_CMD (BIT1+BIT0)
-
-/*; DMA Status Reg.(+54H) (r) */
-#define PCI_MS_ABORT BIT6
-#define BLAST_COMPLETE BIT5
-#define SCSI_INTERRUPT BIT4
-#define DMA_XFER_DONE BIT3
-#define DMA_XFER_ABORT BIT2
-#define DMA_XFER_ERROR BIT1
-#define POWER_DOWN BIT0
-
-/*; DMA SCSI Bus and Ctrl.(+70H) */
-#define EN_INT_ON_PCI_ABORT BIT25
-#define WRT_ERASE_DMA_STAT BIT24
-#define PW_DOWN_CTRL BIT21
-#define SCSI_BUSY BIT20
-#define SCLK BIT19
-#define SCAM BIT18
-#define SCSI_LINES 0x0003ffff
-
-/*
-;==========================================================
-; SCSI Chip register address offset
-;==========================================================
-;Registers are rw unless declared otherwise
-*/
-#define CtcReg_Low 0x00 /* r curr. transfer count */
-#define CtcReg_Mid 0x04 /* r */
-#define CtcReg_High 0x38 /* r */
-#define ScsiFifo 0x08
-#define ScsiCmd 0x0C
-#define Scsi_Status 0x10 /* r */
-#define INT_Status 0x14 /* r */
-#define Sync_Period 0x18 /* w */
-#define Sync_Offset 0x1C /* w */
-#define Clk_Factor 0x24 /* w */
-#define CtrlReg1 0x20
-#define CtrlReg2 0x2C
-#define CtrlReg3 0x30
-#define CtrlReg4 0x34
-#define DMA_Cmd 0x40
-#define DMA_XferCnt 0x44 /* rw starting transfer count (32 bit) */
-#define DMA_XferAddr 0x48 /* rw starting physical address (32 bit) */
-#define DMA_Wk_ByteCntr 0x4C /* r working byte counter */
-#define DMA_Wk_AddrCntr 0x50 /* r working address counter */
-#define DMA_Status 0x54 /* r */
-#define DMA_MDL_Addr 0x58 /* rw starting MDL address */
-#define DMA_Wk_MDL_Cntr 0x5C /* r working MDL counter */
-#define DMA_ScsiBusCtrl 0x70 /* rw SCSI Bus, PCI/DMA Ctrl */
-
-#define StcReg_Low CtcReg_Low /* w start transfer count */
-#define StcReg_Mid CtcReg_Mid /* w */
-#define StcReg_High CtcReg_High /* w */
-#define Scsi_Dest_ID Scsi_Status /* w */
-#define Scsi_TimeOut INT_Status /* w */
-#define Intern_State Sync_Period /* r */
-#define Current_Fifo Sync_Offset /* r Curr. FIFO / int. state */
-
-
-#define DC390_read8(address) \
- (inb (pACB->IOPortBase + (address)))
-
-#define DC390_read8_(address, base) \
- (inb ((u16)(base) + (address)))
-
-#define DC390_read16(address) \
- (inw (pACB->IOPortBase + (address)))
-
-#define DC390_read32(address) \
- (inl (pACB->IOPortBase + (address)))
-
-#define DC390_write8(address,value) \
- outb ((value), pACB->IOPortBase + (address))
-
-#define DC390_write8_(address,value,base) \
- outb ((value), (u16)(base) + (address))
-
-#define DC390_write16(address,value) \
- outw ((value), pACB->IOPortBase + (address))
-
-#define DC390_write32(address,value) \
- outl ((value), pACB->IOPortBase + (address))
-
-
-#endif /* _TMSCSIM_H */
if (TLDEV(dev->type) && dev->tagged_supported)
if (tag_mode == TAG_SIMPLE) {
- scsi_adjust_queue_depth(dev, MSG_SIMPLE_TAG, tqd);
+ scsi_change_queue_depth(dev, tqd);
tag_suffix = ", simple tags";
}
else if (tag_mode == TAG_ORDERED) {
- scsi_adjust_queue_depth(dev, MSG_ORDERED_TAG, tqd);
+ scsi_change_queue_depth(dev, tqd);
tag_suffix = ", ordered tags";
}
else {
- scsi_adjust_queue_depth(dev, 0, tqd);
+ scsi_change_queue_depth(dev, tqd);
tag_suffix = ", no tags";
}
else if (TLDEV(dev->type) && linked_comm) {
- scsi_adjust_queue_depth(dev, 0, tqd);
+ scsi_change_queue_depth(dev, tqd);
tag_suffix = ", untagged";
}
else {
- scsi_adjust_queue_depth(dev, 0, utqd);
+ scsi_change_queue_depth(dev, utqd);
tag_suffix = "";
}
clkfreq = devm_kzalloc(dev, sz * sizeof(*clkfreq),
GFP_KERNEL);
if (!clkfreq) {
- dev_err(dev, "%s: no memory\n", "freq-table-hz");
ret = -ENOMEM;
goto out;
}
if (ret && (ret != -EINVAL)) {
dev_err(dev, "%s: error reading array %d\n",
"freq-table-hz", ret);
- goto free_clkfreq;
+ return ret;
}
for (i = 0; i < sz; i += 2) {
ret = of_property_read_string_index(np,
"clock-names", i/2, (const char **)&name);
if (ret)
- goto free_clkfreq;
+ goto out;
clki = devm_kzalloc(dev, sizeof(*clki), GFP_KERNEL);
if (!clki) {
ret = -ENOMEM;
- goto free_clkfreq;
+ goto out;
}
clki->min_freq = clkfreq[i];
clki->min_freq, clki->max_freq, clki->name);
list_add_tail(&clki->list, &hba->clk_list_head);
}
-free_clkfreq:
- kfree(clkfreq);
out:
return ret;
}
}
vreg = devm_kzalloc(dev, sizeof(*vreg), GFP_KERNEL);
- if (!vreg) {
- dev_err(dev, "No memory for %s regulator\n", name);
- goto out;
- }
+ if (!vreg)
+ return -ENOMEM;
vreg->name = kstrdup(name, GFP_KERNEL);
if (!ufshcd_is_clkgating_allowed(hba))
return;
device_remove_file(hba->dev, &hba->clk_gating.delay_attr);
+ cancel_work_sync(&hba->clk_gating.ungate_work);
+ cancel_delayed_work_sync(&hba->clk_gating.gate_work);
}
/* Must be called with host lock acquired */
return ret;
}
+ /**
+ * ufshcd_init_pwr_info - setting the POR (power on reset)
+ * values in hba power info
+ * @hba: per-adapter instance
+ */
+static void ufshcd_init_pwr_info(struct ufs_hba *hba)
+{
+ hba->pwr_info.gear_rx = UFS_PWM_G1;
+ hba->pwr_info.gear_tx = UFS_PWM_G1;
+ hba->pwr_info.lane_rx = 1;
+ hba->pwr_info.lane_tx = 1;
+ hba->pwr_info.pwr_rx = SLOWAUTO_MODE;
+ hba->pwr_info.pwr_tx = SLOWAUTO_MODE;
+ hba->pwr_info.hs_rate = 0;
+}
+
/**
* ufshcd_get_max_pwr_mode - reads the max power mode negotiated with device
* @hba: per-adapter instance
dev_dbg(hba->dev, "%s: activate tcq with queue depth %d\n",
__func__, lun_qdepth);
- scsi_activate_tcq(sdev, lun_qdepth);
+ scsi_change_queue_depth(sdev, lun_qdepth);
}
/*
struct ufs_hba *hba;
hba = shost_priv(sdev->host);
- sdev->tagged_supported = 1;
/* Mode sense(6) is not supported by UFS, so use Mode sense(10) */
sdev->use_10_for_ms = 1;
- scsi_set_tag_type(sdev, MSG_SIMPLE_TAG);
/* allow SCSI layer to restart the device in case of errors */
sdev->allow_restart = 1;
* ufshcd_change_queue_depth - change queue depth
* @sdev: pointer to SCSI device
* @depth: required depth to set
- * @reason: reason for changing the depth
*
- * Change queue depth according to the reason and make sure
- * the max. limits are not crossed.
+ * Change queue depth and make sure the max. limits are not crossed.
*/
-static int ufshcd_change_queue_depth(struct scsi_device *sdev,
- int depth, int reason)
+static int ufshcd_change_queue_depth(struct scsi_device *sdev, int depth)
{
struct ufs_hba *hba = shost_priv(sdev->host);
if (depth > hba->nutrs)
depth = hba->nutrs;
-
- switch (reason) {
- case SCSI_QDEPTH_DEFAULT:
- case SCSI_QDEPTH_RAMP_UP:
- if (!sdev->tagged_supported)
- depth = 1;
- scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
- break;
- case SCSI_QDEPTH_QFULL:
- scsi_track_queue_full(sdev, depth);
- break;
- default:
- return -EOPNOTSUPP;
- }
-
- return depth;
+ return scsi_change_queue_depth(sdev, depth);
}
/**
struct ufs_hba *hba;
hba = shost_priv(sdev->host);
- scsi_deactivate_tcq(sdev, hba->nutrs);
/* Drop the reference as it won't be needed anymore */
- if (ufshcd_scsi_to_upiu_lun(sdev->lun) == UFS_UPIU_UFS_DEVICE_WLUN)
+ if (ufshcd_scsi_to_upiu_lun(sdev->lun) == UFS_UPIU_UFS_DEVICE_WLUN) {
+ unsigned long flags;
+
+ spin_lock_irqsave(hba->host->host_lock, flags);
hba->sdev_ufs_device = NULL;
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+ }
}
/**
static int ufshcd_scsi_add_wlus(struct ufs_hba *hba)
{
int ret = 0;
+ struct scsi_device *sdev_rpmb;
+ struct scsi_device *sdev_boot;
hba->sdev_ufs_device = __scsi_add_device(hba->host, 0, 0,
ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_UFS_DEVICE_WLUN), NULL);
hba->sdev_ufs_device = NULL;
goto out;
}
+ scsi_device_put(hba->sdev_ufs_device);
- hba->sdev_boot = __scsi_add_device(hba->host, 0, 0,
+ sdev_boot = __scsi_add_device(hba->host, 0, 0,
ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_BOOT_WLUN), NULL);
- if (IS_ERR(hba->sdev_boot)) {
- ret = PTR_ERR(hba->sdev_boot);
- hba->sdev_boot = NULL;
+ if (IS_ERR(sdev_boot)) {
+ ret = PTR_ERR(sdev_boot);
goto remove_sdev_ufs_device;
}
+ scsi_device_put(sdev_boot);
- hba->sdev_rpmb = __scsi_add_device(hba->host, 0, 0,
+ sdev_rpmb = __scsi_add_device(hba->host, 0, 0,
ufshcd_upiu_wlun_to_scsi_wlun(UFS_UPIU_RPMB_WLUN), NULL);
- if (IS_ERR(hba->sdev_rpmb)) {
- ret = PTR_ERR(hba->sdev_rpmb);
- hba->sdev_rpmb = NULL;
+ if (IS_ERR(sdev_rpmb)) {
+ ret = PTR_ERR(sdev_rpmb);
goto remove_sdev_boot;
}
+ scsi_device_put(sdev_rpmb);
goto out;
remove_sdev_boot:
- scsi_remove_device(hba->sdev_boot);
+ scsi_remove_device(sdev_boot);
remove_sdev_ufs_device:
scsi_remove_device(hba->sdev_ufs_device);
out:
return ret;
}
-/**
- * ufshcd_scsi_remove_wlus - Removes the W-LUs which were added by
- * ufshcd_scsi_add_wlus()
- * @hba: per-adapter instance
- *
- */
-static void ufshcd_scsi_remove_wlus(struct ufs_hba *hba)
-{
- if (hba->sdev_ufs_device) {
- scsi_remove_device(hba->sdev_ufs_device);
- hba->sdev_ufs_device = NULL;
- }
-
- if (hba->sdev_boot) {
- scsi_remove_device(hba->sdev_boot);
- hba->sdev_boot = NULL;
- }
-
- if (hba->sdev_rpmb) {
- scsi_remove_device(hba->sdev_rpmb);
- hba->sdev_rpmb = NULL;
- }
-}
-
/**
* ufshcd_probe_hba - probe hba to detect device and initialize
* @hba: per-adapter instance
if (ret)
goto out;
+ ufshcd_init_pwr_info(hba);
+
/* UniPro link is active now */
ufshcd_set_link_active(hba);
.cmd_per_lun = UFSHCD_CMD_PER_LUN,
.can_queue = UFSHCD_CAN_QUEUE,
.max_host_blocked = 1,
+ .use_blk_tags = 1,
+ .track_queue_depth = 1,
};
static int ufshcd_config_vreg_load(struct device *dev, struct ufs_vreg *vreg,
static inline int ufshcd_config_vreg_lpm(struct ufs_hba *hba,
struct ufs_vreg *vreg)
{
+ if (!vreg)
+ return 0;
+
return ufshcd_config_vreg_load(hba->dev, vreg, UFS_VREG_LPM_LOAD_UA);
}
static inline int ufshcd_config_vreg_hpm(struct ufs_hba *hba,
struct ufs_vreg *vreg)
{
+ if (!vreg)
+ return 0;
+
return ufshcd_config_vreg_load(hba->dev, vreg, vreg->max_uA);
}
if (!IS_ERR_OR_NULL(clki->clk) && clki->enabled)
clk_disable_unprepare(clki->clk);
}
- } else if (!ret && on) {
+ } else if (on) {
spin_lock_irqsave(hba->host->host_lock, flags);
hba->clk_gating.state = CLKS_ON;
spin_unlock_irqrestore(hba->host->host_lock, flags);
{
unsigned char cmd[6] = { START_STOP };
struct scsi_sense_hdr sshdr;
- struct scsi_device *sdp = hba->sdev_ufs_device;
+ struct scsi_device *sdp;
+ unsigned long flags;
int ret;
- if (!sdp || !scsi_device_online(sdp))
- return -ENODEV;
+ spin_lock_irqsave(hba->host->host_lock, flags);
+ sdp = hba->sdev_ufs_device;
+ if (sdp) {
+ ret = scsi_device_get(sdp);
+ if (!ret && !scsi_device_online(sdp)) {
+ ret = -ENODEV;
+ scsi_device_put(sdp);
+ }
+ } else {
+ ret = -ENODEV;
+ }
+ spin_unlock_irqrestore(hba->host->host_lock, flags);
+
+ if (ret)
+ return ret;
/*
* If scsi commands fail, the scsi mid-layer schedules scsi error-
START_STOP_TIMEOUT, 0, NULL, REQ_PM);
if (ret) {
sdev_printk(KERN_WARNING, sdp,
- "START_STOP failed for power mode: %d\n", pwr_mode);
- scsi_show_result(ret);
+ "START_STOP failed for power mode: %d, result %x\n",
+ pwr_mode, ret);
if (driver_byte(ret) & DRIVER_SENSE) {
- scsi_show_sense_hdr(&sshdr);
- scsi_show_extd_sense(sshdr.asc, sshdr.ascq);
+ scsi_show_sense_hdr(sdp, NULL, &sshdr);
+ scsi_show_extd_sense(sdp, NULL, sshdr.asc, sshdr.ascq);
}
}
if (!ret)
hba->curr_dev_pwr_mode = pwr_mode;
out:
+ scsi_device_put(sdp);
hba->host->eh_noresume = 0;
return ret;
}
int ret = 0;
if (!hba || !hba->is_powered)
- goto out;
+ return 0;
if (pm_runtime_suspended(hba->dev)) {
if (hba->rpm_lvl == hba->spm_lvl)
void ufshcd_remove(struct ufs_hba *hba)
{
scsi_remove_host(hba->host);
- ufshcd_scsi_remove_wlus(hba);
/* disable interrupts */
ufshcd_disable_intr(hba, hba->intr_mask);
ufshcd_hba_stop(hba);
* "UFS device" W-LU.
*/
struct scsi_device *sdev_ufs_device;
- struct scsi_device *sdev_rpmb;
- struct scsi_device *sdev_boot;
enum ufs_dev_pwr_mode curr_dev_pwr_mode;
enum uic_link_state uic_link_state;
return virtscsi_queuecommand(vscsi, &vscsi->req_vqs[0], sc);
}
+static struct virtio_scsi_vq *virtscsi_pick_vq_mq(struct virtio_scsi *vscsi,
+ struct scsi_cmnd *sc)
+{
+ u32 tag = blk_mq_unique_tag(sc->request);
+ u16 hwq = blk_mq_unique_tag_to_hwq(tag);
+
+ return &vscsi->req_vqs[hwq];
+}
+
static struct virtio_scsi_vq *virtscsi_pick_vq(struct virtio_scsi *vscsi,
struct virtio_scsi_target_state *tgt)
{
struct virtio_scsi *vscsi = shost_priv(sh);
struct virtio_scsi_target_state *tgt =
scsi_target(sc->device)->hostdata;
- struct virtio_scsi_vq *req_vq = virtscsi_pick_vq(vscsi, tgt);
+ struct virtio_scsi_vq *req_vq;
+
+ if (shost_use_blk_mq(sh))
+ req_vq = virtscsi_pick_vq_mq(vscsi, sc);
+ else
+ req_vq = virtscsi_pick_vq(vscsi, tgt);
return virtscsi_queuecommand(vscsi, req_vq, sc);
}
* virtscsi_change_queue_depth() - Change a virtscsi target's queue depth
* @sdev: Virtscsi target whose queue depth to change
* @qdepth: New queue depth
- * @reason: Reason for the queue depth change.
*/
-static int virtscsi_change_queue_depth(struct scsi_device *sdev,
- int qdepth,
- int reason)
+static int virtscsi_change_queue_depth(struct scsi_device *sdev, int qdepth)
{
struct Scsi_Host *shost = sdev->host;
int max_depth = shost->cmd_per_lun;
- switch (reason) {
- case SCSI_QDEPTH_QFULL: /* Drop qdepth in response to BUSY state */
- scsi_track_queue_full(sdev, qdepth);
- break;
- case SCSI_QDEPTH_RAMP_UP: /* Raise qdepth after BUSY state resolved */
- case SCSI_QDEPTH_DEFAULT: /* Manual change via sysfs */
- scsi_adjust_queue_depth(sdev,
- scsi_get_tag_type(sdev),
- min(max_depth, qdepth));
- break;
- default:
- return -EOPNOTSUPP;
- }
-
- return sdev->queue_depth;
+ return scsi_change_queue_depth(sdev, min(max_depth, qdepth));
}
static int virtscsi_abort(struct scsi_cmnd *sc)
.use_clustering = ENABLE_CLUSTERING,
.target_alloc = virtscsi_target_alloc,
.target_destroy = virtscsi_target_destroy,
+ .track_queue_depth = 1,
};
static struct scsi_host_template virtscsi_host_template_multi = {
.use_clustering = ENABLE_CLUSTERING,
.target_alloc = virtscsi_target_alloc,
.target_destroy = virtscsi_target_destroy,
+ .track_queue_depth = 1,
};
#define virtscsi_config_get(vdev, fld) \
shost->max_id = num_targets;
shost->max_channel = 0;
shost->max_cmd_len = VIRTIO_SCSI_CDB_SIZE;
+ shost->nr_hw_queues = num_queues;
if (virtio_has_feature(vdev, VIRTIO_SCSI_F_T10_PI)) {
host_prot = SHOST_DIF_TYPE1_PROTECTION | SHOST_DIF_TYPE2_PROTECTION |
}
}
-static int pvscsi_change_queue_depth(struct scsi_device *sdev,
- int qdepth,
- int reason)
+static int pvscsi_change_queue_depth(struct scsi_device *sdev, int qdepth)
{
- int max_depth;
- struct Scsi_Host *shost = sdev->host;
-
- if (reason != SCSI_QDEPTH_DEFAULT)
- /*
- * We support only changing default.
- */
- return -EOPNOTSUPP;
-
- max_depth = shost->can_queue;
if (!sdev->tagged_supported)
- max_depth = 1;
- if (qdepth > max_depth)
- qdepth = max_depth;
- scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), qdepth);
-
- if (sdev->inquiry_len > 7)
- sdev_printk(KERN_INFO, sdev,
- "qdepth(%d), tagged(%d), simple(%d), ordered(%d), scsi_level(%d), cmd_que(%d)\n",
- sdev->queue_depth, sdev->tagged_supported,
- sdev->simple_tags, sdev->ordered_tags,
- sdev->scsi_level, (sdev->inquiry[7] & 2) >> 1);
- return sdev->queue_depth;
+ qdepth = 1;
+ return scsi_change_queue_depth(sdev, qdepth);
}
/*
memcpy(e->cdb, cmd->cmnd, e->cdbLen);
e->tag = SIMPLE_QUEUE_TAG;
- if (sdev->tagged_supported &&
- (cmd->tag == HEAD_OF_QUEUE_TAG ||
- cmd->tag == ORDERED_QUEUE_TAG))
- e->tag = cmd->tag;
if (cmd->sc_data_direction == DMA_FROM_DEVICE)
e->flags = PVSCSI_FLAG_CMD_DIR_TOHOST;
.can_queue = WD7000_Q,
.this_id = 7,
.sg_tablesize = WD7000_SG,
- .cmd_per_lun = 1,
.unchecked_isa_dma = 1,
.use_clustering = ENABLE_CLUSTERING,
};
--- /dev/null
+/*
+ * Driver for Western Digital WD7193, WD7197 and WD7296 SCSI cards
+ * Copyright 2013 Ondrej Zary
+ *
+ * Original driver by
+ * Aaron Dewell <dewell@woods.net>
+ * Gaerti <Juergen.Gaertner@mbox.si.uni-hannover.de>
+ *
+ * HW documentation available in book:
+ *
+ * SPIDER Command Protocol
+ * by Chandru M. Sippy
+ * SCSI Storage Products (MCP)
+ * Western Digital Corporation
+ * 09-15-95
+ *
+ * http://web.archive.org/web/20070717175254/http://sun1.rrzn.uni-hannover.de/gaertner.juergen/wd719x/Linux/Docu/Spider/
+ */
+
+/*
+ * Driver workflow:
+ * 1. SCSI command is transformed to SCB (Spider Control Block) by the
+ * queuecommand function.
+ * 2. The address of the SCB is stored in a list to be able to access it, if
+ * something goes wrong.
+ * 3. The address of the SCB is written to the Controller, which loads the SCB
+ * via BM-DMA and processes it.
+ * 4. After it has finished, it generates an interrupt, and sets registers.
+ *
+ * flaws:
+ * - abort/reset functions
+ *
+ * ToDo:
+ * - tagged queueing
+ */
+
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/delay.h>
+#include <linux/pci.h>
+#include <linux/firmware.h>
+#include <linux/eeprom_93cx6.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_host.h>
+#include "wd719x.h"
+
+/* low-level register access */
+static inline u8 wd719x_readb(struct wd719x *wd, u8 reg)
+{
+ return ioread8(wd->base + reg);
+}
+
+static inline u32 wd719x_readl(struct wd719x *wd, u8 reg)
+{
+ return ioread32(wd->base + reg);
+}
+
+static inline void wd719x_writeb(struct wd719x *wd, u8 reg, u8 val)
+{
+ iowrite8(val, wd->base + reg);
+}
+
+static inline void wd719x_writew(struct wd719x *wd, u8 reg, u16 val)
+{
+ iowrite16(val, wd->base + reg);
+}
+
+static inline void wd719x_writel(struct wd719x *wd, u8 reg, u32 val)
+{
+ iowrite32(val, wd->base + reg);
+}
+
+/* wait until the command register is ready */
+static inline int wd719x_wait_ready(struct wd719x *wd)
+{
+ int i = 0;
+
+ do {
+ if (wd719x_readb(wd, WD719X_AMR_COMMAND) == WD719X_CMD_READY)
+ return 0;
+ udelay(1);
+ } while (i++ < WD719X_WAIT_FOR_CMD_READY);
+
+ dev_err(&wd->pdev->dev, "command register is not ready: 0x%02x\n",
+ wd719x_readb(wd, WD719X_AMR_COMMAND));
+
+ return -ETIMEDOUT;
+}
+
+/* poll interrupt status register until command finishes */
+static inline int wd719x_wait_done(struct wd719x *wd, int timeout)
+{
+ u8 status;
+
+ while (timeout > 0) {
+ status = wd719x_readb(wd, WD719X_AMR_INT_STATUS);
+ if (status)
+ break;
+ timeout--;
+ udelay(1);
+ }
+
+ if (timeout <= 0) {
+ dev_err(&wd->pdev->dev, "direct command timed out\n");
+ return -ETIMEDOUT;
+ }
+
+ if (status != WD719X_INT_NOERRORS) {
+ dev_err(&wd->pdev->dev, "direct command failed, status 0x%02x, SUE 0x%02x\n",
+ status, wd719x_readb(wd, WD719X_AMR_SCB_ERROR));
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int wd719x_direct_cmd(struct wd719x *wd, u8 opcode, u8 dev, u8 lun,
+ u8 tag, dma_addr_t data, int timeout)
+{
+ int ret = 0;
+
+ /* clear interrupt status register (allow command register to clear) */
+ wd719x_writeb(wd, WD719X_AMR_INT_STATUS, WD719X_INT_NONE);
+
+ /* Wait for the Command register to become free */
+ if (wd719x_wait_ready(wd))
+ return -ETIMEDOUT;
+
+ /* make sure we get NO interrupts */
+ dev |= WD719X_DISABLE_INT;
+ wd719x_writeb(wd, WD719X_AMR_CMD_PARAM, dev);
+ wd719x_writeb(wd, WD719X_AMR_CMD_PARAM_2, lun);
+ wd719x_writeb(wd, WD719X_AMR_CMD_PARAM_3, tag);
+ if (data)
+ wd719x_writel(wd, WD719X_AMR_SCB_IN, data);
+
+ /* clear interrupt status register again */
+ wd719x_writeb(wd, WD719X_AMR_INT_STATUS, WD719X_INT_NONE);
+
+ /* Now, write the command */
+ wd719x_writeb(wd, WD719X_AMR_COMMAND, opcode);
+
+ if (timeout) /* wait for the command to complete */
+ ret = wd719x_wait_done(wd, timeout);
+
+ /* clear interrupt status register (clean up) */
+ if (opcode != WD719X_CMD_READ_FIRMVER)
+ wd719x_writeb(wd, WD719X_AMR_INT_STATUS, WD719X_INT_NONE);
+
+ return ret;
+}
+
+static void wd719x_destroy(struct wd719x *wd)
+{
+ struct wd719x_scb *scb;
+
+ /* stop the RISC */
+ if (wd719x_direct_cmd(wd, WD719X_CMD_SLEEP, 0, 0, 0, 0,
+ WD719X_WAIT_FOR_RISC))
+ dev_warn(&wd->pdev->dev, "RISC sleep command failed\n");
+ /* disable RISC */
+ wd719x_writeb(wd, WD719X_PCI_MODE_SELECT, 0);
+
+ /* free all SCBs */
+ list_for_each_entry(scb, &wd->active_scbs, list)
+ pci_free_consistent(wd->pdev, sizeof(struct wd719x_scb), scb,
+ scb->phys);
+ list_for_each_entry(scb, &wd->free_scbs, list)
+ pci_free_consistent(wd->pdev, sizeof(struct wd719x_scb), scb,
+ scb->phys);
+ /* free internal buffers */
+ pci_free_consistent(wd->pdev, wd->fw_size, wd->fw_virt, wd->fw_phys);
+ wd->fw_virt = NULL;
+ pci_free_consistent(wd->pdev, WD719X_HASH_TABLE_SIZE, wd->hash_virt,
+ wd->hash_phys);
+ wd->hash_virt = NULL;
+ pci_free_consistent(wd->pdev, sizeof(struct wd719x_host_param),
+ wd->params, wd->params_phys);
+ wd->params = NULL;
+ free_irq(wd->pdev->irq, wd);
+}
+
+/* finish a SCSI command, mark SCB (if any) as free, unmap buffers */
+static void wd719x_finish_cmd(struct scsi_cmnd *cmd, int result)
+{
+ struct wd719x *wd = shost_priv(cmd->device->host);
+ struct wd719x_scb *scb = (struct wd719x_scb *) cmd->host_scribble;
+
+ if (scb) {
+ list_move(&scb->list, &wd->free_scbs);
+ dma_unmap_single(&wd->pdev->dev, cmd->SCp.dma_handle,
+ SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE);
+ scsi_dma_unmap(cmd);
+ }
+ cmd->result = result << 16;
+ cmd->scsi_done(cmd);
+}
+
+/* Build a SCB and send it to the card */
+static int wd719x_queuecommand(struct Scsi_Host *sh, struct scsi_cmnd *cmd)
+{
+ int i, count_sg;
+ unsigned long flags;
+ struct wd719x_scb *scb;
+ struct wd719x *wd = shost_priv(sh);
+ dma_addr_t phys;
+
+ cmd->host_scribble = NULL;
+
+ /* get a free SCB - either from existing ones or allocate a new one */
+ spin_lock_irqsave(wd->sh->host_lock, flags);
+ scb = list_first_entry_or_null(&wd->free_scbs, struct wd719x_scb, list);
+ if (scb) {
+ list_del(&scb->list);
+ phys = scb->phys;
+ } else {
+ spin_unlock_irqrestore(wd->sh->host_lock, flags);
+ scb = pci_alloc_consistent(wd->pdev, sizeof(struct wd719x_scb),
+ &phys);
+ spin_lock_irqsave(wd->sh->host_lock, flags);
+ if (!scb) {
+ dev_err(&wd->pdev->dev, "unable to allocate SCB\n");
+ wd719x_finish_cmd(cmd, DID_ERROR);
+ spin_unlock_irqrestore(wd->sh->host_lock, flags);
+ return 0;
+ }
+ }
+ memset(scb, 0, sizeof(struct wd719x_scb));
+ list_add(&scb->list, &wd->active_scbs);
+
+ scb->phys = phys;
+ scb->cmd = cmd;
+ cmd->host_scribble = (char *) scb;
+
+ scb->CDB_tag = 0; /* Tagged queueing not supported yet */
+ scb->devid = cmd->device->id;
+ scb->lun = cmd->device->lun;
+
+ /* copy the command */
+ memcpy(scb->CDB, cmd->cmnd, cmd->cmd_len);
+
+ /* map sense buffer */
+ scb->sense_buf_length = SCSI_SENSE_BUFFERSIZE;
+ cmd->SCp.dma_handle = dma_map_single(&wd->pdev->dev, cmd->sense_buffer,
+ SCSI_SENSE_BUFFERSIZE, DMA_FROM_DEVICE);
+ scb->sense_buf = cpu_to_le32(cmd->SCp.dma_handle);
+
+ /* request autosense */
+ scb->SCB_options |= WD719X_SCB_FLAGS_AUTO_REQUEST_SENSE;
+
+ /* check direction */
+ if (cmd->sc_data_direction == DMA_TO_DEVICE)
+ scb->SCB_options |= WD719X_SCB_FLAGS_CHECK_DIRECTION
+ | WD719X_SCB_FLAGS_PCI_TO_SCSI;
+ else if (cmd->sc_data_direction == DMA_FROM_DEVICE)
+ scb->SCB_options |= WD719X_SCB_FLAGS_CHECK_DIRECTION;
+
+ /* Scather/gather */
+ count_sg = scsi_dma_map(cmd);
+ if (count_sg < 0) {
+ wd719x_finish_cmd(cmd, DID_ERROR);
+ spin_unlock_irqrestore(wd->sh->host_lock, flags);
+ return 0;
+ }
+ BUG_ON(count_sg > WD719X_SG);
+
+ if (count_sg) {
+ struct scatterlist *sg;
+
+ scb->data_length = cpu_to_le32(count_sg *
+ sizeof(struct wd719x_sglist));
+ scb->data_p = cpu_to_le32(scb->phys +
+ offsetof(struct wd719x_scb, sg_list));
+
+ scsi_for_each_sg(cmd, sg, count_sg, i) {
+ scb->sg_list[i].ptr = cpu_to_le32(sg_dma_address(sg));
+ scb->sg_list[i].length = cpu_to_le32(sg_dma_len(sg));
+ }
+ scb->SCB_options |= WD719X_SCB_FLAGS_DO_SCATTER_GATHER;
+ } else { /* zero length */
+ scb->data_length = 0;
+ scb->data_p = 0;
+ }
+
+ /* check if the Command register is free */
+ if (wd719x_readb(wd, WD719X_AMR_COMMAND) != WD719X_CMD_READY) {
+ spin_unlock_irqrestore(wd->sh->host_lock, flags);
+ return SCSI_MLQUEUE_HOST_BUSY;
+ }
+
+ /* write pointer to the AMR */
+ wd719x_writel(wd, WD719X_AMR_SCB_IN, scb->phys);
+ /* send SCB opcode */
+ wd719x_writeb(wd, WD719X_AMR_COMMAND, WD719X_CMD_PROCESS_SCB);
+
+ spin_unlock_irqrestore(wd->sh->host_lock, flags);
+
+ return 0;
+}
+
+static int wd719x_chip_init(struct wd719x *wd)
+{
+ int i, ret;
+ u32 risc_init[3];
+ const struct firmware *fw_wcs, *fw_risc;
+ const char fwname_wcs[] = "wd719x-wcs.bin";
+ const char fwname_risc[] = "wd719x-risc.bin";
+
+ memset(wd->hash_virt, 0, WD719X_HASH_TABLE_SIZE);
+
+ /* WCS (sequencer) firmware */
+ ret = request_firmware(&fw_wcs, fwname_wcs, &wd->pdev->dev);
+ if (ret) {
+ dev_err(&wd->pdev->dev, "Unable to load firmware %s: %d\n",
+ fwname_wcs, ret);
+ return ret;
+ }
+ /* RISC firmware */
+ ret = request_firmware(&fw_risc, fwname_risc, &wd->pdev->dev);
+ if (ret) {
+ dev_err(&wd->pdev->dev, "Unable to load firmware %s: %d\n",
+ fwname_risc, ret);
+ release_firmware(fw_wcs);
+ return ret;
+ }
+ wd->fw_size = ALIGN(fw_wcs->size, 4) + fw_risc->size;
+
+ if (!wd->fw_virt)
+ wd->fw_virt = pci_alloc_consistent(wd->pdev, wd->fw_size,
+ &wd->fw_phys);
+ if (!wd->fw_virt) {
+ ret = -ENOMEM;
+ goto wd719x_init_end;
+ }
+
+ /* make a fresh copy of WCS and RISC code */
+ memcpy(wd->fw_virt, fw_wcs->data, fw_wcs->size);
+ memcpy(wd->fw_virt + ALIGN(fw_wcs->size, 4), fw_risc->data,
+ fw_risc->size);
+
+ /* Reset the Spider Chip and adapter itself */
+ wd719x_writeb(wd, WD719X_PCI_PORT_RESET, WD719X_PCI_RESET);
+ udelay(WD719X_WAIT_FOR_RISC);
+ /* Clear PIO mode bits set by BIOS */
+ wd719x_writeb(wd, WD719X_AMR_CMD_PARAM, 0);
+ /* ensure RISC is not running */
+ wd719x_writeb(wd, WD719X_PCI_MODE_SELECT, 0);
+ /* ensure command port is ready */
+ wd719x_writeb(wd, WD719X_AMR_COMMAND, 0);
+ if (wd719x_wait_ready(wd)) {
+ ret = -ETIMEDOUT;
+ goto wd719x_init_end;
+ }
+
+ /* Transfer the first 2K words of RISC code to kick start the uP */
+ risc_init[0] = wd->fw_phys; /* WCS FW */
+ risc_init[1] = wd->fw_phys + ALIGN(fw_wcs->size, 4); /* RISC FW */
+ risc_init[2] = wd->hash_phys; /* hash table */
+
+ /* clear DMA status */
+ wd719x_writeb(wd, WD719X_PCI_CHANNEL2_3STATUS, 0);
+
+ /* address to read firmware from */
+ wd719x_writel(wd, WD719X_PCI_EXTERNAL_ADDR, risc_init[1]);
+ /* base address to write firmware to (on card) */
+ wd719x_writew(wd, WD719X_PCI_INTERNAL_ADDR, WD719X_PRAM_BASE_ADDR);
+ /* size: first 2K words */
+ wd719x_writew(wd, WD719X_PCI_DMA_TRANSFER_SIZE, 2048 * 2);
+ /* start DMA */
+ wd719x_writeb(wd, WD719X_PCI_CHANNEL2_3CMD, WD719X_START_CHANNEL2_3DMA);
+
+ /* wait for DMA to complete */
+ i = WD719X_WAIT_FOR_RISC;
+ while (i-- > 0) {
+ u8 status = wd719x_readb(wd, WD719X_PCI_CHANNEL2_3STATUS);
+ if (status == WD719X_START_CHANNEL2_3DONE)
+ break;
+ if (status == WD719X_START_CHANNEL2_3ABORT) {
+ dev_warn(&wd->pdev->dev, "RISC bootstrap failed: DMA aborted\n");
+ ret = -EIO;
+ goto wd719x_init_end;
+ }
+ udelay(1);
+ }
+ if (i < 1) {
+ dev_warn(&wd->pdev->dev, "RISC bootstrap failed: DMA timeout\n");
+ ret = -ETIMEDOUT;
+ goto wd719x_init_end;
+ }
+
+ /* firmware is loaded, now initialize and wake up the RISC */
+ /* write RISC initialization long words to Spider */
+ wd719x_writel(wd, WD719X_AMR_SCB_IN, risc_init[0]);
+ wd719x_writel(wd, WD719X_AMR_SCB_IN + 4, risc_init[1]);
+ wd719x_writel(wd, WD719X_AMR_SCB_IN + 8, risc_init[2]);
+
+ /* disable interrupts during initialization of RISC */
+ wd719x_writeb(wd, WD719X_AMR_CMD_PARAM, WD719X_DISABLE_INT);
+
+ /* issue INITIALIZE RISC comand */
+ wd719x_writeb(wd, WD719X_AMR_COMMAND, WD719X_CMD_INIT_RISC);
+ /* enable advanced mode (wake up RISC) */
+ wd719x_writeb(wd, WD719X_PCI_MODE_SELECT, WD719X_ENABLE_ADVANCE_MODE);
+ udelay(WD719X_WAIT_FOR_RISC);
+
+ ret = wd719x_wait_done(wd, WD719X_WAIT_FOR_RISC);
+ /* clear interrupt status register */
+ wd719x_writeb(wd, WD719X_AMR_INT_STATUS, WD719X_INT_NONE);
+ if (ret) {
+ dev_warn(&wd->pdev->dev, "Unable to initialize RISC\n");
+ goto wd719x_init_end;
+ }
+ /* RISC is up and running */
+
+ /* Read FW version from RISC */
+ ret = wd719x_direct_cmd(wd, WD719X_CMD_READ_FIRMVER, 0, 0, 0, 0,
+ WD719X_WAIT_FOR_RISC);
+ if (ret) {
+ dev_warn(&wd->pdev->dev, "Unable to read firmware version\n");
+ goto wd719x_init_end;
+ }
+ dev_info(&wd->pdev->dev, "RISC initialized with firmware version %.2x.%.2x\n",
+ wd719x_readb(wd, WD719X_AMR_SCB_OUT + 1),
+ wd719x_readb(wd, WD719X_AMR_SCB_OUT));
+
+ /* RESET SCSI bus */
+ ret = wd719x_direct_cmd(wd, WD719X_CMD_BUSRESET, 0, 0, 0, 0,
+ WD719X_WAIT_FOR_SCSI_RESET);
+ if (ret) {
+ dev_warn(&wd->pdev->dev, "SCSI bus reset failed\n");
+ goto wd719x_init_end;
+ }
+
+ /* use HostParameter structure to set Spider's Host Parameter Block */
+ ret = wd719x_direct_cmd(wd, WD719X_CMD_SET_PARAM, 0,
+ sizeof(struct wd719x_host_param), 0,
+ wd->params_phys, WD719X_WAIT_FOR_RISC);
+ if (ret) {
+ dev_warn(&wd->pdev->dev, "Failed to set HOST PARAMETERS\n");
+ goto wd719x_init_end;
+ }
+
+ /* initiate SCAM (does nothing if disabled in BIOS) */
+ /* bug?: we should pass a mask of static IDs which we don't have */
+ ret = wd719x_direct_cmd(wd, WD719X_CMD_INIT_SCAM, 0, 0, 0, 0,
+ WD719X_WAIT_FOR_SCSI_RESET);
+ if (ret) {
+ dev_warn(&wd->pdev->dev, "SCAM initialization failed\n");
+ goto wd719x_init_end;
+ }
+
+ /* clear AMR_BIOS_SHARE_INT register */
+ wd719x_writeb(wd, WD719X_AMR_BIOS_SHARE_INT, 0);
+
+wd719x_init_end:
+ release_firmware(fw_wcs);
+ release_firmware(fw_risc);
+
+ return ret;
+}
+
+static int wd719x_abort(struct scsi_cmnd *cmd)
+{
+ int action, result;
+ unsigned long flags;
+ struct wd719x_scb *scb = (struct wd719x_scb *)cmd->host_scribble;
+ struct wd719x *wd = shost_priv(cmd->device->host);
+
+ dev_info(&wd->pdev->dev, "abort command, tag: %x\n", cmd->tag);
+
+ action = /*cmd->tag ? WD719X_CMD_ABORT_TAG : */WD719X_CMD_ABORT;
+
+ spin_lock_irqsave(wd->sh->host_lock, flags);
+ result = wd719x_direct_cmd(wd, action, cmd->device->id,
+ cmd->device->lun, cmd->tag, scb->phys, 0);
+ spin_unlock_irqrestore(wd->sh->host_lock, flags);
+ if (result)
+ return FAILED;
+
+ return SUCCESS;
+}
+
+static int wd719x_reset(struct scsi_cmnd *cmd, u8 opcode, u8 device)
+{
+ int result;
+ unsigned long flags;
+ struct wd719x *wd = shost_priv(cmd->device->host);
+
+ dev_info(&wd->pdev->dev, "%s reset requested\n",
+ (opcode == WD719X_CMD_BUSRESET) ? "bus" : "device");
+
+ spin_lock_irqsave(wd->sh->host_lock, flags);
+ result = wd719x_direct_cmd(wd, opcode, device, 0, 0, 0,
+ WD719X_WAIT_FOR_SCSI_RESET);
+ spin_unlock_irqrestore(wd->sh->host_lock, flags);
+ if (result)
+ return FAILED;
+
+ return SUCCESS;
+}
+
+static int wd719x_dev_reset(struct scsi_cmnd *cmd)
+{
+ return wd719x_reset(cmd, WD719X_CMD_RESET, cmd->device->id);
+}
+
+static int wd719x_bus_reset(struct scsi_cmnd *cmd)
+{
+ return wd719x_reset(cmd, WD719X_CMD_BUSRESET, 0);
+}
+
+static int wd719x_host_reset(struct scsi_cmnd *cmd)
+{
+ struct wd719x *wd = shost_priv(cmd->device->host);
+ struct wd719x_scb *scb, *tmp;
+ unsigned long flags;
+ int result;
+
+ dev_info(&wd->pdev->dev, "host reset requested\n");
+ spin_lock_irqsave(wd->sh->host_lock, flags);
+ /* Try to reinit the RISC */
+ if (wd719x_chip_init(wd) == 0)
+ result = SUCCESS;
+ else
+ result = FAILED;
+
+ /* flush all SCBs */
+ list_for_each_entry_safe(scb, tmp, &wd->active_scbs, list) {
+ struct scsi_cmnd *tmp_cmd = scb->cmd;
+ wd719x_finish_cmd(tmp_cmd, result);
+ }
+ spin_unlock_irqrestore(wd->sh->host_lock, flags);
+
+ return result;
+}
+
+static int wd719x_biosparam(struct scsi_device *sdev, struct block_device *bdev,
+ sector_t capacity, int geom[])
+{
+ if (capacity >= 0x200000) {
+ geom[0] = 255; /* heads */
+ geom[1] = 63; /* sectors */
+ } else {
+ geom[0] = 64; /* heads */
+ geom[1] = 32; /* sectors */
+ }
+ geom[2] = sector_div(capacity, geom[0] * geom[1]); /* cylinders */
+
+ return 0;
+}
+
+/* process a SCB-completion interrupt */
+static inline void wd719x_interrupt_SCB(struct wd719x *wd,
+ union wd719x_regs regs,
+ struct wd719x_scb *scb)
+{
+ struct scsi_cmnd *cmd;
+ int result;
+
+ /* now have to find result from card */
+ switch (regs.bytes.SUE) {
+ case WD719X_SUE_NOERRORS:
+ result = DID_OK;
+ break;
+ case WD719X_SUE_REJECTED:
+ dev_err(&wd->pdev->dev, "command rejected\n");
+ result = DID_ERROR;
+ break;
+ case WD719X_SUE_SCBQFULL:
+ dev_err(&wd->pdev->dev, "SCB queue is full\n");
+ result = DID_ERROR;
+ break;
+ case WD719X_SUE_TERM:
+ dev_dbg(&wd->pdev->dev, "SCB terminated by direct command\n");
+ result = DID_ABORT; /* or DID_RESET? */
+ break;
+ case WD719X_SUE_CHAN1ABORT:
+ case WD719X_SUE_CHAN23ABORT:
+ result = DID_ABORT;
+ dev_err(&wd->pdev->dev, "DMA abort\n");
+ break;
+ case WD719X_SUE_CHAN1PAR:
+ case WD719X_SUE_CHAN23PAR:
+ result = DID_PARITY;
+ dev_err(&wd->pdev->dev, "DMA parity error\n");
+ break;
+ case WD719X_SUE_TIMEOUT:
+ result = DID_TIME_OUT;
+ dev_dbg(&wd->pdev->dev, "selection timeout\n");
+ break;
+ case WD719X_SUE_RESET:
+ dev_dbg(&wd->pdev->dev, "bus reset occured\n");
+ result = DID_RESET;
+ break;
+ case WD719X_SUE_BUSERROR:
+ dev_dbg(&wd->pdev->dev, "SCSI bus error\n");
+ result = DID_ERROR;
+ break;
+ case WD719X_SUE_WRONGWAY:
+ dev_err(&wd->pdev->dev, "wrong data transfer direction\n");
+ result = DID_ERROR;
+ break;
+ case WD719X_SUE_BADPHASE:
+ dev_err(&wd->pdev->dev, "invalid SCSI phase\n");
+ result = DID_ERROR;
+ break;
+ case WD719X_SUE_TOOLONG:
+ dev_err(&wd->pdev->dev, "record too long\n");
+ result = DID_ERROR;
+ break;
+ case WD719X_SUE_BUSFREE:
+ dev_err(&wd->pdev->dev, "unexpected bus free\n");
+ result = DID_NO_CONNECT; /* or DID_ERROR ???*/
+ break;
+ case WD719X_SUE_ARSDONE:
+ dev_dbg(&wd->pdev->dev, "auto request sense\n");
+ if (regs.bytes.SCSI == 0)
+ result = DID_OK;
+ else
+ result = DID_PARITY;
+ break;
+ case WD719X_SUE_IGNORED:
+ dev_err(&wd->pdev->dev, "target id %d ignored command\n",
+ scb->cmd->device->id);
+ result = DID_NO_CONNECT;
+ break;
+ case WD719X_SUE_WRONGTAGS:
+ dev_err(&wd->pdev->dev, "reversed tags\n");
+ result = DID_ERROR;
+ break;
+ case WD719X_SUE_BADTAGS:
+ dev_err(&wd->pdev->dev, "tag type not supported by target\n");
+ result = DID_ERROR;
+ break;
+ case WD719X_SUE_NOSCAMID:
+ dev_err(&wd->pdev->dev, "no SCAM soft ID available\n");
+ result = DID_ERROR;
+ break;
+ default:
+ dev_warn(&wd->pdev->dev, "unknown SUE error code: 0x%x\n",
+ regs.bytes.SUE);
+ result = DID_ERROR;
+ break;
+ }
+ cmd = scb->cmd;
+
+ wd719x_finish_cmd(cmd, result);
+}
+
+static irqreturn_t wd719x_interrupt(int irq, void *dev_id)
+{
+ struct wd719x *wd = dev_id;
+ union wd719x_regs regs;
+ unsigned long flags;
+ u32 SCB_out;
+
+ spin_lock_irqsave(wd->sh->host_lock, flags);
+ /* read SCB pointer back from card */
+ SCB_out = wd719x_readl(wd, WD719X_AMR_SCB_OUT);
+ /* read all status info at once */
+ regs.all = cpu_to_le32(wd719x_readl(wd, WD719X_AMR_OP_CODE));
+
+ switch (regs.bytes.INT) {
+ case WD719X_INT_NONE:
+ spin_unlock_irqrestore(wd->sh->host_lock, flags);
+ return IRQ_NONE;
+ case WD719X_INT_LINKNOSTATUS:
+ dev_err(&wd->pdev->dev, "linked command completed with no status\n");
+ break;
+ case WD719X_INT_BADINT:
+ dev_err(&wd->pdev->dev, "unsolicited interrupt\n");
+ break;
+ case WD719X_INT_NOERRORS:
+ case WD719X_INT_LINKNOERRORS:
+ case WD719X_INT_ERRORSLOGGED:
+ case WD719X_INT_SPIDERFAILED:
+ /* was the cmd completed a direct or SCB command? */
+ if (regs.bytes.OPC == WD719X_CMD_PROCESS_SCB) {
+ struct wd719x_scb *scb;
+ list_for_each_entry(scb, &wd->active_scbs, list)
+ if (SCB_out == scb->phys)
+ break;
+ if (SCB_out == scb->phys)
+ wd719x_interrupt_SCB(wd, regs, scb);
+ else
+ dev_err(&wd->pdev->dev, "card returned invalid SCB pointer\n");
+ } else
+ dev_warn(&wd->pdev->dev, "direct command 0x%x completed\n",
+ regs.bytes.OPC);
+ break;
+ case WD719X_INT_PIOREADY:
+ dev_err(&wd->pdev->dev, "card indicates PIO data ready but we never use PIO\n");
+ /* interrupt will not be cleared until all data is read */
+ break;
+ default:
+ dev_err(&wd->pdev->dev, "unknown interrupt reason: %d\n",
+ regs.bytes.INT);
+
+ }
+ /* clear interrupt so another can happen */
+ wd719x_writeb(wd, WD719X_AMR_INT_STATUS, WD719X_INT_NONE);
+ spin_unlock_irqrestore(wd->sh->host_lock, flags);
+
+ return IRQ_HANDLED;
+}
+
+static void wd719x_eeprom_reg_read(struct eeprom_93cx6 *eeprom)
+{
+ struct wd719x *wd = eeprom->data;
+ u8 reg = wd719x_readb(wd, WD719X_PCI_GPIO_DATA);
+
+ eeprom->reg_data_out = reg & WD719X_EE_DO;
+}
+
+static void wd719x_eeprom_reg_write(struct eeprom_93cx6 *eeprom)
+{
+ struct wd719x *wd = eeprom->data;
+ u8 reg = 0;
+
+ if (eeprom->reg_data_in)
+ reg |= WD719X_EE_DI;
+ if (eeprom->reg_data_clock)
+ reg |= WD719X_EE_CLK;
+ if (eeprom->reg_chip_select)
+ reg |= WD719X_EE_CS;
+
+ wd719x_writeb(wd, WD719X_PCI_GPIO_DATA, reg);
+}
+
+/* read config from EEPROM so it can be downloaded by the RISC on (re-)init */
+static void wd719x_read_eeprom(struct wd719x *wd)
+{
+ struct eeprom_93cx6 eeprom;
+ u8 gpio;
+ struct wd719x_eeprom_header header;
+
+ eeprom.data = wd;
+ eeprom.register_read = wd719x_eeprom_reg_read;
+ eeprom.register_write = wd719x_eeprom_reg_write;
+ eeprom.width = PCI_EEPROM_WIDTH_93C46;
+
+ /* set all outputs to low */
+ wd719x_writeb(wd, WD719X_PCI_GPIO_DATA, 0);
+ /* configure GPIO pins */
+ gpio = wd719x_readb(wd, WD719X_PCI_GPIO_CONTROL);
+ /* GPIO outputs */
+ gpio &= (~(WD719X_EE_CLK | WD719X_EE_DI | WD719X_EE_CS));
+ /* GPIO input */
+ gpio |= WD719X_EE_DO;
+ wd719x_writeb(wd, WD719X_PCI_GPIO_CONTROL, gpio);
+
+ /* read EEPROM header */
+ eeprom_93cx6_multireadb(&eeprom, 0, (u8 *)&header, sizeof(header));
+
+ if (header.sig1 == 'W' && header.sig2 == 'D')
+ eeprom_93cx6_multireadb(&eeprom, header.cfg_offset,
+ (u8 *)wd->params,
+ sizeof(struct wd719x_host_param));
+ else { /* default EEPROM values */
+ dev_warn(&wd->pdev->dev, "EEPROM signature is invalid (0x%02x 0x%02x), using default values\n",
+ header.sig1, header.sig2);
+ wd->params->ch_1_th = 0x10; /* 16 DWs = 64 B */
+ wd->params->scsi_conf = 0x4c; /* 48ma, spue, parity check */
+ wd->params->own_scsi_id = 0x07; /* ID 7, SCAM disabled */
+ wd->params->sel_timeout = 0x4d; /* 250 ms */
+ wd->params->sleep_timer = 0x01;
+ wd->params->cdb_size = cpu_to_le16(0x5555); /* all 6 B */
+ wd->params->scsi_pad = 0x1b;
+ if (wd->type == WD719X_TYPE_7193) /* narrow card - disable */
+ wd->params->wide = cpu_to_le32(0x00000000);
+ else /* initiate & respond to WIDE messages */
+ wd->params->wide = cpu_to_le32(0xffffffff);
+ wd->params->sync = cpu_to_le32(0xffffffff);
+ wd->params->soft_mask = 0x00; /* all disabled */
+ wd->params->unsol_mask = 0x00; /* all disabled */
+ }
+ /* disable TAGGED messages */
+ wd->params->tag_en = cpu_to_le16(0x0000);
+}
+
+/* Read card type from GPIO bits 1 and 3 */
+static enum wd719x_card_type wd719x_detect_type(struct wd719x *wd)
+{
+ u8 card = wd719x_readb(wd, WD719X_PCI_GPIO_CONTROL);
+
+ card |= WD719X_GPIO_ID_BITS;
+ wd719x_writeb(wd, WD719X_PCI_GPIO_CONTROL, card);
+ card = wd719x_readb(wd, WD719X_PCI_GPIO_DATA) & WD719X_GPIO_ID_BITS;
+ switch (card) {
+ case 0x08:
+ return WD719X_TYPE_7193;
+ case 0x02:
+ return WD719X_TYPE_7197;
+ case 0x00:
+ return WD719X_TYPE_7296;
+ default:
+ dev_warn(&wd->pdev->dev, "unknown card type 0x%x\n", card);
+ return WD719X_TYPE_UNKNOWN;
+ }
+}
+
+static int wd719x_board_found(struct Scsi_Host *sh)
+{
+ struct wd719x *wd = shost_priv(sh);
+ char *card_types[] = { "Unknown card", "WD7193", "WD7197", "WD7296" };
+ int ret;
+
+ INIT_LIST_HEAD(&wd->active_scbs);
+ INIT_LIST_HEAD(&wd->free_scbs);
+
+ sh->base = pci_resource_start(wd->pdev, 0);
+
+ wd->type = wd719x_detect_type(wd);
+
+ wd->sh = sh;
+ sh->irq = wd->pdev->irq;
+ wd->fw_virt = NULL;
+
+ /* memory area for host (EEPROM) parameters */
+ wd->params = pci_alloc_consistent(wd->pdev,
+ sizeof(struct wd719x_host_param),
+ &wd->params_phys);
+ if (!wd->params) {
+ dev_warn(&wd->pdev->dev, "unable to allocate parameter buffer\n");
+ return -ENOMEM;
+ }
+
+ /* memory area for the RISC for hash table of outstanding requests */
+ wd->hash_virt = pci_alloc_consistent(wd->pdev, WD719X_HASH_TABLE_SIZE,
+ &wd->hash_phys);
+ if (!wd->hash_virt) {
+ dev_warn(&wd->pdev->dev, "unable to allocate hash buffer\n");
+ ret = -ENOMEM;
+ goto fail_free_params;
+ }
+
+ ret = request_irq(wd->pdev->irq, wd719x_interrupt, IRQF_SHARED,
+ "wd719x", wd);
+ if (ret) {
+ dev_warn(&wd->pdev->dev, "unable to assign IRQ %d\n",
+ wd->pdev->irq);
+ goto fail_free_hash;
+ }
+
+ /* read parameters from EEPROM */
+ wd719x_read_eeprom(wd);
+
+ ret = wd719x_chip_init(wd);
+ if (ret)
+ goto fail_free_irq;
+
+ sh->this_id = wd->params->own_scsi_id & WD719X_EE_SCSI_ID_MASK;
+
+ dev_info(&wd->pdev->dev, "%s at I/O 0x%lx, IRQ %u, SCSI ID %d\n",
+ card_types[wd->type], sh->base, sh->irq, sh->this_id);
+
+ return 0;
+
+fail_free_irq:
+ free_irq(wd->pdev->irq, wd);
+fail_free_hash:
+ pci_free_consistent(wd->pdev, WD719X_HASH_TABLE_SIZE, wd->hash_virt,
+ wd->hash_phys);
+fail_free_params:
+ pci_free_consistent(wd->pdev, sizeof(struct wd719x_host_param),
+ wd->params, wd->params_phys);
+
+ return ret;
+}
+
+static struct scsi_host_template wd719x_template = {
+ .name = "Western Digital 719x",
+ .queuecommand = wd719x_queuecommand,
+ .eh_abort_handler = wd719x_abort,
+ .eh_device_reset_handler = wd719x_dev_reset,
+ .eh_bus_reset_handler = wd719x_bus_reset,
+ .eh_host_reset_handler = wd719x_host_reset,
+ .bios_param = wd719x_biosparam,
+ .proc_name = "wd719x",
+ .can_queue = 255,
+ .this_id = 7,
+ .sg_tablesize = WD719X_SG,
+ .cmd_per_lun = WD719X_CMD_PER_LUN,
+ .use_clustering = ENABLE_CLUSTERING,
+};
+
+static int wd719x_pci_probe(struct pci_dev *pdev, const struct pci_device_id *d)
+{
+ int err;
+ struct Scsi_Host *sh;
+ struct wd719x *wd;
+
+ err = pci_enable_device(pdev);
+ if (err)
+ goto fail;
+
+ if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32))) {
+ dev_warn(&pdev->dev, "Unable to set 32-bit DMA mask\n");
+ goto disable_device;
+ }
+
+ err = pci_request_regions(pdev, "wd719x");
+ if (err)
+ goto disable_device;
+ pci_set_master(pdev);
+
+ err = -ENODEV;
+ if (pci_resource_len(pdev, 0) == 0)
+ goto release_region;
+
+ err = -ENOMEM;
+ sh = scsi_host_alloc(&wd719x_template, sizeof(struct wd719x));
+ if (!sh)
+ goto release_region;
+
+ wd = shost_priv(sh);
+ wd->base = pci_iomap(pdev, 0, 0);
+ if (!wd->base)
+ goto free_host;
+ wd->pdev = pdev;
+
+ err = wd719x_board_found(sh);
+ if (err)
+ goto unmap;
+
+ err = scsi_add_host(sh, &wd->pdev->dev);
+ if (err)
+ goto destroy;
+
+ scsi_scan_host(sh);
+
+ pci_set_drvdata(pdev, sh);
+ return 0;
+
+destroy:
+ wd719x_destroy(wd);
+unmap:
+ pci_iounmap(pdev, wd->base);
+free_host:
+ scsi_host_put(sh);
+release_region:
+ pci_release_regions(pdev);
+disable_device:
+ pci_disable_device(pdev);
+fail:
+ return err;
+}
+
+
+static void wd719x_pci_remove(struct pci_dev *pdev)
+{
+ struct Scsi_Host *sh = pci_get_drvdata(pdev);
+ struct wd719x *wd = shost_priv(sh);
+
+ scsi_remove_host(sh);
+ wd719x_destroy(wd);
+ pci_iounmap(pdev, wd->base);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+
+ scsi_host_put(sh);
+}
+
+static DEFINE_PCI_DEVICE_TABLE(wd719x_pci_table) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_WD, 0x3296) },
+ {}
+};
+
+MODULE_DEVICE_TABLE(pci, wd719x_pci_table);
+
+static struct pci_driver wd719x_pci_driver = {
+ .name = "wd719x",
+ .id_table = wd719x_pci_table,
+ .probe = wd719x_pci_probe,
+ .remove = wd719x_pci_remove,
+};
+
+static int __init wd719x_init(void)
+{
+ return pci_register_driver(&wd719x_pci_driver);
+}
+
+static void __exit wd719x_exit(void)
+{
+ pci_unregister_driver(&wd719x_pci_driver);
+}
+
+module_init(wd719x_init);
+module_exit(wd719x_exit);
+
+MODULE_DESCRIPTION("Western Digital WD7193/7197/7296 SCSI driver");
+MODULE_AUTHOR("Ondrej Zary, Aaron Dewell, Juergen Gaertner");
+MODULE_LICENSE("GPL");
+MODULE_FIRMWARE("wd719x-wcs.bin");
+MODULE_FIRMWARE("wd719x-risc.bin");
--- /dev/null
+#ifndef _WD719X_H_
+#define _WD719X_H_
+
+#define WD719X_SG 255 /* Scatter/gather size */
+#define WD719X_CMD_PER_LUN 1 /* We should be able to do linked commands, but
+ * this is 1 for now to be safe. */
+
+struct wd719x_sglist {
+ __le32 ptr;
+ __le32 length;
+} __packed;
+
+enum wd719x_card_type {
+ WD719X_TYPE_UNKNOWN = 0,
+ WD719X_TYPE_7193,
+ WD719X_TYPE_7197,
+ WD719X_TYPE_7296,
+};
+
+union wd719x_regs {
+ __le32 all; /* All Status at once */
+ struct {
+ u8 OPC; /* Opcode register */
+ u8 SCSI; /* SCSI Errors */
+ u8 SUE; /* Spider unique Errors */
+ u8 INT; /* Interrupt Status */
+ } bytes;
+};
+
+/* Spider Command Block (SCB) */
+struct wd719x_scb {
+ __le32 Int_SCB; /* 00-03 Internal SCB link pointer (must be cleared) */
+ u8 SCB_opcode; /* 04 SCB Command opcode */
+ u8 CDB_tag; /* 05 SCSI Tag byte for CDB queues (0 if untagged) */
+ u8 lun; /* 06 SCSI LUN */
+ u8 devid; /* 07 SCSI Device ID */
+ u8 CDB[16]; /* 08-23 SCSI CDB (16 bytes as defined by ANSI spec. */
+ __le32 data_p; /* 24-27 Data transfer address (or SG list address) */
+ __le32 data_length; /* 28-31 Data transfer Length (or SG list length) */
+ __le32 CDB_link; /* 32-35 SCSI CDB Link Ptr */
+ __le32 sense_buf; /* 36-39 Auto request sense buffer address */
+ u8 sense_buf_length;/* 40 Auto request sense transfer length */
+ u8 reserved; /* 41 reserved */
+ u8 SCB_options; /* 42 SCB-options */
+ u8 SCB_tag_msg; /* 43 Tagged messages options */
+ /* Not filled in by host */
+ __le32 req_ptr; /* 44-47 Ptr to Host Request returned on interrupt */
+ u8 host_opcode; /* 48 Host Command Opcode (same as AMR_00) */
+ u8 scsi_stat; /* 49 SCSI Status returned */
+ u8 ret_error; /* 50 SPIDER Unique Error Code returned (SUE) */
+ u8 int_stat; /* 51 Message u8 / Interrupt Status byte returned */
+ __le32 transferred; /* 52-55 Bytes Transferred */
+ u8 last_trans[3]; /* 56-58 Bytes Transferred in last session */
+ u8 length; /* 59 SCSI Messages Length (1-8) */
+ u8 sync_offset; /* 60 Synchronous offset */
+ u8 sync_rate; /* 61 Synchronous rate */
+ u8 flags[2]; /* 62-63 SCB specific flags (local to each thread) */
+ /* everything below is for driver use (not used by card) */
+ dma_addr_t phys; /* bus address of the SCB */
+ struct scsi_cmnd *cmd; /* a copy of the pointer we were passed */
+ struct list_head list;
+ struct wd719x_sglist sg_list[WD719X_SG] __aligned(8); /* SG list */
+} __packed;
+
+struct wd719x {
+ struct Scsi_Host *sh; /* pointer to host structure */
+ struct pci_dev *pdev;
+ void __iomem *base;
+ enum wd719x_card_type type; /* type of card */
+ void *fw_virt; /* firmware buffer CPU address */
+ dma_addr_t fw_phys; /* firmware buffer bus address */
+ size_t fw_size; /* firmware buffer size */
+ struct wd719x_host_param *params; /* host parameters (EEPROM) */
+ dma_addr_t params_phys; /* host parameters bus address */
+ void *hash_virt; /* hash table CPU address */
+ dma_addr_t hash_phys; /* hash table bus address */
+ struct list_head active_scbs;
+ struct list_head free_scbs;
+};
+
+/* timeout delays in microsecs */
+#define WD719X_WAIT_FOR_CMD_READY 500
+#define WD719X_WAIT_FOR_RISC 2000
+#define WD719X_WAIT_FOR_SCSI_RESET 3000000
+
+/* All commands except 0x00 generate an interrupt */
+#define WD719X_CMD_READY 0x00 /* Command register ready (or noop) */
+#define WD719X_CMD_INIT_RISC 0x01 /* Initialize RISC */
+/* 0x02 is reserved */
+#define WD719X_CMD_BUSRESET 0x03 /* Assert SCSI bus reset */
+#define WD719X_CMD_READ_FIRMVER 0x04 /* Read the Firmware Revision */
+#define WD719X_CMD_ECHO_BYTES 0x05 /* Echo command bytes (DW) */
+/* 0x06 is reserved */
+/* 0x07 is reserved */
+#define WD719X_CMD_GET_PARAM 0x08 /* Get programmable parameters */
+#define WD719X_CMD_SET_PARAM 0x09 /* Set programmable parameters */
+#define WD719X_CMD_SLEEP 0x0a /* Put SPIDER to sleep */
+#define WD719X_CMD_READ_INIT 0x0b /* Read initialization parameters */
+#define WD719X_CMD_RESTORE_INIT 0x0c /* Restore initialization parameters */
+/* 0x0d is reserved */
+/* 0x0e is reserved */
+/* 0x0f is reserved */
+#define WD719X_CMD_ABORT_TAG 0x10 /* Send Abort tag message to target */
+#define WD719X_CMD_ABORT 0x11 /* Send Abort message to target */
+#define WD719X_CMD_RESET 0x12 /* Send Reset message to target */
+#define WD719X_CMD_INIT_SCAM 0x13 /* Initiate SCAM */
+#define WD719X_CMD_GET_SYNC 0x14 /* Get synchronous rates */
+#define WD719X_CMD_SET_SYNC 0x15 /* Set synchronous rates */
+#define WD719X_CMD_GET_WIDTH 0x16 /* Get SCSI bus width */
+#define WD719X_CMD_SET_WIDTH 0x17 /* Set SCSI bus width */
+#define WD719X_CMD_GET_TAGS 0x18 /* Get tag flags */
+#define WD719X_CMD_SET_TAGS 0x19 /* Set tag flags */
+#define WD719X_CMD_GET_PARAM2 0x1a /* Get programmable params (format 2) */
+#define WD719X_CMD_SET_PARAM2 0x1b /* Set programmable params (format 2) */
+/* Commands with request pointers (mailbox) */
+#define WD719X_CMD_PROCESS_SCB 0x80 /* Process SCSI Control Block (SCB) */
+/* No interrupt generated on acceptance of SCB pointer */
+
+/* interrupt status defines */
+#define WD719X_INT_NONE 0x00 /* No interrupt pending */
+#define WD719X_INT_NOERRORS 0x01 /* Command completed with no errors */
+#define WD719X_INT_LINKNOERRORS 0x02 /* link cmd completed with no errors */
+#define WD719X_INT_LINKNOSTATUS 0x03 /* link cmd completed with no flag set */
+#define WD719X_INT_ERRORSLOGGED 0x04 /* cmd completed with errors logged */
+#define WD719X_INT_SPIDERFAILED 0x05 /* cmd failed without valid SCSI status */
+#define WD719X_INT_BADINT 0x80 /* unsolicited interrupt */
+#define WD719X_INT_PIOREADY 0xf0 /* data ready for PIO output */
+
+/* Spider Unique Error Codes (SUE) */
+#define WD719X_SUE_NOERRORS 0x00 /* No errors detected by SPIDER */
+#define WD719X_SUE_REJECTED 0x01 /* Command Rejected (bad opcode/param) */
+#define WD719X_SUE_SCBQFULL 0x02 /* SCB queue full */
+/* 0x03 is reserved */
+#define WD719X_SUE_TERM 0x04 /* Host terminated SCB via primative cmd */
+#define WD719X_SUE_CHAN1PAR 0x05 /* PCI Channel 1 parity error occurred */
+#define WD719X_SUE_CHAN1ABORT 0x06 /* PCI Channel 1 system abort occurred */
+#define WD719X_SUE_CHAN23PAR 0x07 /* PCI Channel 2/3 parity error occurred */
+#define WD719X_SUE_CHAN23ABORT 0x08 /* PCI Channel 2/3 system abort occurred */
+#define WD719X_SUE_TIMEOUT 0x10 /* Selection/reselection timeout */
+#define WD719X_SUE_RESET 0x11 /* SCSI bus reset occurred */
+#define WD719X_SUE_BUSERROR 0x12 /* SCSI bus error */
+#define WD719X_SUE_WRONGWAY 0x13 /* Wrong data transfer dir set by target */
+#define WD719X_SUE_BADPHASE 0x14 /* SCSI phase illegal or unexpected */
+#define WD719X_SUE_TOOLONG 0x15 /* target requested too much data */
+#define WD719X_SUE_BUSFREE 0x16 /* Unexpected SCSI bus free */
+#define WD719X_SUE_ARSDONE 0x17 /* Auto request sense executed */
+#define WD719X_SUE_IGNORED 0x18 /* SCSI message was ignored by target */
+#define WD719X_SUE_WRONGTAGS 0x19 /* Tagged SCB & tags off (or vice versa) */
+#define WD719X_SUE_BADTAGS 0x1a /* Wrong tag message type for target */
+#define WD719X_SUE_NOSCAMID 0x1b /* No SCAM soft ID available */
+
+/* code sizes */
+#define WD719X_HASH_TABLE_SIZE 4096
+
+/* Advanced Mode Registers */
+/* Regs 0x00..0x1f are for Advanced Mode of the card (RISC is running). */
+#define WD719X_AMR_COMMAND 0x00
+#define WD719X_AMR_CMD_PARAM 0x01
+#define WD719X_AMR_CMD_PARAM_2 0x02
+#define WD719X_AMR_CMD_PARAM_3 0x03
+#define WD719X_AMR_SCB_IN 0x04
+
+#define WD719X_AMR_BIOS_SHARE_INT 0x0f
+
+#define WD719X_AMR_SCB_OUT 0x18
+#define WD719X_AMR_OP_CODE 0x1c
+#define WD719X_AMR_SCSI_STATUS 0x1d
+#define WD719X_AMR_SCB_ERROR 0x1e
+#define WD719X_AMR_INT_STATUS 0x1f
+
+#define WD719X_DISABLE_INT 0x80
+
+/* SCB flags */
+#define WD719X_SCB_FLAGS_CHECK_DIRECTION 0x01
+#define WD719X_SCB_FLAGS_PCI_TO_SCSI 0x02
+#define WD719X_SCB_FLAGS_AUTO_REQUEST_SENSE 0x10
+#define WD719X_SCB_FLAGS_DO_SCATTER_GATHER 0x20
+#define WD719X_SCB_FLAGS_NO_DISCONNECT 0x40
+
+/* PCI Registers used for reset, initial code download */
+/* Regs 0x20..0x3f are for Normal (DOS) mode (RISC is asleep). */
+#define WD719X_PCI_GPIO_CONTROL 0x3C
+#define WD719X_PCI_GPIO_DATA 0x3D
+#define WD719X_PCI_PORT_RESET 0x3E
+#define WD719X_PCI_MODE_SELECT 0x3F
+
+#define WD719X_PCI_EXTERNAL_ADDR 0x60
+#define WD719X_PCI_INTERNAL_ADDR 0x64
+#define WD719X_PCI_DMA_TRANSFER_SIZE 0x66
+#define WD719X_PCI_CHANNEL2_3CMD 0x68
+#define WD719X_PCI_CHANNEL2_3STATUS 0x69
+
+#define WD719X_GPIO_ID_BITS 0x0a
+#define WD719X_PRAM_BASE_ADDR 0x00
+
+/* codes written to or read from the card */
+#define WD719X_PCI_RESET 0x01
+#define WD719X_ENABLE_ADVANCE_MODE 0x01
+
+#define WD719X_START_CHANNEL2_3DMA 0x17
+#define WD719X_START_CHANNEL2_3DONE 0x01
+#define WD719X_START_CHANNEL2_3ABORT 0x20
+
+/* 33C296 GPIO bits for EEPROM pins */
+#define WD719X_EE_DI (1 << 1)
+#define WD719X_EE_CS (1 << 2)
+#define WD719X_EE_CLK (1 << 3)
+#define WD719X_EE_DO (1 << 4)
+
+/* EEPROM contents */
+struct wd719x_eeprom_header {
+ u8 sig1;
+ u8 sig2;
+ u8 version;
+ u8 checksum;
+ u8 cfg_offset;
+ u8 cfg_size;
+ u8 setup_offset;
+ u8 setup_size;
+} __packed;
+
+#define WD719X_EE_SIG1 0
+#define WD719X_EE_SIG2 1
+#define WD719X_EE_VERSION 2
+#define WD719X_EE_CHECKSUM 3
+#define WD719X_EE_CFG_OFFSET 4
+#define WD719X_EE_CFG_SIZE 5
+#define WD719X_EE_SETUP_OFFSET 6
+#define WD719X_EE_SETUP_SIZE 7
+
+#define WD719X_EE_SCSI_ID_MASK 0xf
+
+/* SPIDER Host Parameters Block (=EEPROM configuration block) */
+struct wd719x_host_param {
+ u8 ch_1_th; /* FIFO threshold */
+ u8 scsi_conf; /* SCSI configuration */
+ u8 own_scsi_id; /* controller SCSI ID */
+ u8 sel_timeout; /* selection timeout*/
+ u8 sleep_timer; /* seep timer */
+ __le16 cdb_size;/* CDB size groups */
+ __le16 tag_en; /* Tag msg enables (ID 0-15) */
+ u8 scsi_pad; /* SCSI pad control */
+ __le32 wide; /* WIDE msg options (ID 0-15) */
+ __le32 sync; /* SYNC msg options (ID 0-15) */
+ u8 soft_mask; /* soft error mask */
+ u8 unsol_mask; /* unsolicited error mask */
+} __packed;
+
+#endif /* _WD719X_H_ */
list_for_each_entry(region, &kdev->regions, list)
#define first_region(kdev) \
- list_first_entry(&kdev->regions, \
- struct knav_region, list)
+ list_first_entry_or_null(&kdev->regions, \
+ struct knav_region, list)
#define for_each_queue_range(kdev, range) \
list_for_each_entry(range, &kdev->queue_ranges, list)
#define first_queue_range(kdev) \
- list_first_entry(&kdev->queue_ranges, \
- struct knav_range_info, list)
+ list_first_entry_or_null(&kdev->queue_ranges, \
+ struct knav_range_info, list)
#define for_each_pool(kdev, pool) \
list_for_each_entry(pool, &kdev->pools, list)
dev_err(kdev->dev, "out of descs in region(%d) for pool(%s)\n",
region_id, name);
ret = -ENOMEM;
- goto err;
+ goto err_unlock;
}
/* Region maintains a sorted (by region offset) list of pools
dev_err(kdev->dev, "pool(%s) create failed: fragmented desc pool in region(%d)\n",
name, region_id);
ret = -ENOMEM;
- goto err;
+ goto err_unlock;
}
mutex_unlock(&knav_dev_lock);
kdesc_fill_pool(pool);
return pool;
-err:
+err_unlock:
mutex_unlock(&knav_dev_lock);
+err:
kfree(pool->name);
devm_kfree(kdev->dev, pool);
return ERR_PTR(ret);
static void knav_queue_free_regions(struct knav_device *kdev)
{
struct knav_region *region;
- struct knav_pool *pool;
+ struct knav_pool *pool, *tmp;
unsigned size;
for (;;) {
region = first_region(kdev);
if (!region)
break;
- list_for_each_entry(pool, ®ion->pools, region_inst)
+ list_for_each_entry_safe(pool, tmp, ®ion->pools, region_inst)
knav_pool_destroy(pool);
size = region->virt_end - region->virt_start;
size = (1 << kdev->inst_shift) * kdev->num_queues_in_use;
kdev->instances = devm_kzalloc(kdev->dev, size, GFP_KERNEL);
if (!kdev->instances)
- return -1;
+ return -ENOMEM;
for_each_queue_range(kdev, range) {
if (range->ops && range->ops->init_range)
#
# ARM Versatile SoC drivers
#
+config SOC_INTEGRATOR_CM
+ bool "SoC bus device for the ARM Integrator platform core modules"
+ depends on ARCH_INTEGRATOR
+ select SOC_BUS
+ help
+ Include support for the SoC bus on the ARM Integrator platform
+ core modules providing some sysfs information about the ASIC
+ variant.
+
config SOC_REALVIEW
bool "SoC bus device for the ARM RealView platforms"
depends on ARCH_REALVIEW
+obj-$(CONFIG_SOC_INTEGRATOR_CM) += soc-integrator.o
obj-$(CONFIG_SOC_REALVIEW) += soc-realview.o
--- /dev/null
+/*
+ * Copyright (C) 2014 Linaro Ltd.
+ *
+ * Author: Linus Walleij <linus.walleij@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ *
+ */
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/slab.h>
+#include <linux/sys_soc.h>
+#include <linux/platform_device.h>
+#include <linux/mfd/syscon.h>
+#include <linux/regmap.h>
+#include <linux/of.h>
+
+#define INTEGRATOR_HDR_ID_OFFSET 0x00
+
+static u32 integrator_coreid;
+
+static const struct of_device_id integrator_cm_match[] = {
+ { .compatible = "arm,core-module-integrator", },
+ { }
+};
+
+static const char *integrator_arch_str(u32 id)
+{
+ switch ((id >> 16) & 0xff) {
+ case 0x00:
+ return "ASB little-endian";
+ case 0x01:
+ return "AHB little-endian";
+ case 0x03:
+ return "AHB-Lite system bus, bi-endian";
+ case 0x04:
+ return "AHB";
+ case 0x08:
+ return "AHB system bus, ASB processor bus";
+ default:
+ return "Unknown";
+ }
+}
+
+static const char *integrator_fpga_str(u32 id)
+{
+ switch ((id >> 12) & 0xf) {
+ case 0x01:
+ return "XC4062";
+ case 0x02:
+ return "XC4085";
+ case 0x03:
+ return "XVC600";
+ case 0x04:
+ return "EPM7256AE (Altera PLD)";
+ default:
+ return "Unknown";
+ }
+}
+
+static ssize_t integrator_get_manf(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%02x\n", integrator_coreid >> 24);
+}
+
+static struct device_attribute integrator_manf_attr =
+ __ATTR(manufacturer, S_IRUGO, integrator_get_manf, NULL);
+
+static ssize_t integrator_get_arch(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%s\n", integrator_arch_str(integrator_coreid));
+}
+
+static struct device_attribute integrator_arch_attr =
+ __ATTR(arch, S_IRUGO, integrator_get_arch, NULL);
+
+static ssize_t integrator_get_fpga(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%s\n", integrator_fpga_str(integrator_coreid));
+}
+
+static struct device_attribute integrator_fpga_attr =
+ __ATTR(fpga, S_IRUGO, integrator_get_fpga, NULL);
+
+static ssize_t integrator_get_build(struct device *dev,
+ struct device_attribute *attr,
+ char *buf)
+{
+ return sprintf(buf, "%02x\n", (integrator_coreid >> 4) & 0xFF);
+}
+
+static struct device_attribute integrator_build_attr =
+ __ATTR(build, S_IRUGO, integrator_get_build, NULL);
+
+static int __init integrator_soc_init(void)
+{
+ static struct regmap *syscon_regmap;
+ struct soc_device *soc_dev;
+ struct soc_device_attribute *soc_dev_attr;
+ struct device_node *np;
+ struct device *dev;
+ u32 val;
+ int ret;
+
+ np = of_find_matching_node(NULL, integrator_cm_match);
+ if (!np)
+ return -ENODEV;
+
+ syscon_regmap = syscon_node_to_regmap(np);
+ if (IS_ERR(syscon_regmap))
+ return PTR_ERR(syscon_regmap);
+
+ ret = regmap_read(syscon_regmap, INTEGRATOR_HDR_ID_OFFSET,
+ &val);
+ if (ret)
+ return -ENODEV;
+ integrator_coreid = val;
+
+ soc_dev_attr = kzalloc(sizeof(*soc_dev_attr), GFP_KERNEL);
+ if (!soc_dev_attr)
+ return -ENOMEM;
+
+ soc_dev_attr->soc_id = "Integrator";
+ soc_dev_attr->machine = "Integrator";
+ soc_dev_attr->family = "Versatile";
+ soc_dev = soc_device_register(soc_dev_attr);
+ if (IS_ERR(soc_dev)) {
+ kfree(soc_dev_attr);
+ return -ENODEV;
+ }
+ dev = soc_device_to_device(soc_dev);
+
+ device_create_file(dev, &integrator_manf_attr);
+ device_create_file(dev, &integrator_arch_attr);
+ device_create_file(dev, &integrator_fpga_attr);
+ device_create_file(dev, &integrator_build_attr);
+
+ dev_info(dev, "Detected ARM core module:\n");
+ dev_info(dev, " Manufacturer: %02x\n", (val >> 24));
+ dev_info(dev, " Architecture: %s\n", integrator_arch_str(val));
+ dev_info(dev, " FPGA: %s\n", integrator_fpga_str(val));
+ dev_info(dev, " Build: %02x\n", (val >> 4) & 0xFF);
+ dev_info(dev, " Rev: %c\n", ('A' + (val & 0x03)));
+
+ return 0;
+}
+device_initcall(integrator_soc_init);
{ .compatible = "arm,realview-pb11mp-soc", },
{ .compatible = "arm,realview-pba8-soc", },
{ .compatible = "arm,realview-pbx-soc", },
+ { }
};
static u32 realview_coreid;
chip = dws->cur_chip;
spi = message->spi;
- if (unlikely(!chip->clk_div))
- chip->clk_div = dws->max_freq / chip->speed_hz;
-
if (message->state == ERROR_STATE) {
message->status = -EIO;
goto early_exit;
if (transfer->speed_hz) {
speed = chip->speed_hz;
- if (transfer->speed_hz != speed) {
+ if ((transfer->speed_hz != speed) || (!chip->clk_div)) {
speed = transfer->speed_hz;
/* clk_div doesn't support odd number */
dev_err(&spi->dev, "No max speed HZ parameter\n");
return -EINVAL;
}
- chip->speed_hz = spi->max_speed_hz;
chip->tmode = 0; /* Tx & Rx */
/* Default SPI mode is SCPOL = 0, SCPH = 0 */
master->cleanup = dw_spi_cleanup;
master->transfer_one_message = dw_spi_transfer_one_message;
master->max_speed_hz = dws->max_freq;
+ master->dev.of_node = dev->of_node;
/* Basic HW init */
spi_hw_init(dws);
#define SPI_TCR 0x08
-#define SPI_CTAR(x) (0x0c + (x * 4))
+#define SPI_CTAR(x) (0x0c + (((x) & 0x3) * 4))
#define SPI_CTAR_FMSZ(x) (((x) & 0x0000000f) << 27)
#define SPI_CTAR_CPOL(x) ((x) << 26)
#define SPI_CTAR_CPHA(x) ((x) << 25)
#define SPI_PUSHR 0x34
#define SPI_PUSHR_CONT (1 << 31)
-#define SPI_PUSHR_CTAS(x) (((x) & 0x00000007) << 28)
+#define SPI_PUSHR_CTAS(x) (((x) & 0x00000003) << 28)
#define SPI_PUSHR_EOQ (1 << 27)
#define SPI_PUSHR_CTCNT (1 << 26)
#define SPI_PUSHR_PCS(x) (((1 << x) & 0x0000003f) << 16)
spi->master = master;
of_id = of_match_device(orion_spi_of_match_table, &pdev->dev);
- devdata = of_id->data;
+ devdata = (of_id) ? of_id->data : &orion_spi_dev_data;
spi->devdata = devdata;
spi->clk = devm_clk_get(&pdev->dev, NULL);
pl022->sgt_tx.nents, DMA_TO_DEVICE);
err_tx_sgmap:
dma_unmap_sg(rxchan->device->dev, pl022->sgt_rx.sgl,
- pl022->sgt_tx.nents, DMA_FROM_DEVICE);
+ pl022->sgt_rx.nents, DMA_FROM_DEVICE);
err_rx_sgmap:
sg_free_table(&pl022->sgt_tx);
err_alloc_tx_sg:
if (status != 0)
return status;
write_SSCR0(0, drv_data->ioaddr);
- clk_disable_unprepare(ssp->clk);
+
+ if (!pm_runtime_suspended(dev))
+ clk_disable_unprepare(ssp->clk);
return 0;
}
pxa2xx_spi_dma_resume(drv_data);
/* Enable the SSP clock */
- clk_prepare_enable(ssp->clk);
+ if (!pm_runtime_suspended(dev))
+ clk_prepare_enable(ssp->clk);
/* Restore LPSS private register bits */
lpss_ssp_setup(drv_data);
#define RXBUSY (1 << 0)
#define TXBUSY (1 << 1)
+/* sclk_out: spi master internal logic in rk3x can support 50Mhz */
+#define MAX_SCLK_OUT 50000000
+
enum rockchip_ssi_type {
SSI_MOTO_SPI = 0,
SSI_TI_SSP,
spin_unlock_irqrestore(&rs->lock, flags);
+ spi_enable_chip(rs, 0);
+
return 0;
}
if (rs->tx)
wait_for_idle(rs);
+ spi_enable_chip(rs, 0);
+
return 0;
}
spin_lock_irqsave(&rs->lock, flags);
rs->state &= ~RXBUSY;
- if (!(rs->state & TXBUSY))
+ if (!(rs->state & TXBUSY)) {
+ spi_enable_chip(rs, 0);
spi_finalize_current_transfer(rs->master);
+ }
spin_unlock_irqrestore(&rs->lock, flags);
}
spin_lock_irqsave(&rs->lock, flags);
rs->state &= ~TXBUSY;
- if (!(rs->state & RXBUSY))
+ if (!(rs->state & RXBUSY)) {
+ spi_enable_chip(rs, 0);
spi_finalize_current_transfer(rs->master);
+ }
spin_unlock_irqrestore(&rs->lock, flags);
}
dmacr |= RF_DMA_EN;
}
+ if (WARN_ON(rs->speed > MAX_SCLK_OUT))
+ rs->speed = MAX_SCLK_OUT;
+
+ /* the minimum divsor is 2 */
+ if (rs->max_freq < 2 * rs->speed) {
+ clk_set_rate(rs->spiclk, 2 * rs->speed);
+ rs->max_freq = clk_get_rate(rs->spiclk);
+ }
+
/* div doesn't support odd number */
div = max_t(u32, rs->max_freq / rs->speed, 1);
div = (div + 1) & 0xfffe;
- spi_enable_chip(rs, 0);
-
writel_relaxed(cr0, rs->regs + ROCKCHIP_SPI_CTRLR0);
writel_relaxed(rs->len - 1, rs->regs + ROCKCHIP_SPI_CTRLR1);
spi_set_clk(rs, div);
dev_dbg(rs->dev, "cr0 0x%x, div %d\n", cr0, div);
-
- spi_enable_chip(rs, 1);
}
static int rockchip_spi_transfer_one(
struct spi_device *spi,
struct spi_transfer *xfer)
{
- int ret = 0;
+ int ret = 1;
struct rockchip_spi *rs = spi_master_get_devdata(master);
WARN_ON(readl_relaxed(rs->regs + ROCKCHIP_SPI_SSIENR) &&
rs->tmode = CR0_XFM_RO;
/* we need prepare dma before spi was enabled */
- if (master->can_dma && master->can_dma(master, spi, xfer)) {
+ if (master->can_dma && master->can_dma(master, spi, xfer))
rs->use_dma = 1;
- rockchip_spi_prepare_dma(rs);
- } else {
+ else
rs->use_dma = 0;
- }
rockchip_spi_config(rs);
- if (!rs->use_dma)
+ if (rs->use_dma) {
+ if (rs->tmode == CR0_XFM_RO) {
+ /* rx: dma must be prepared first */
+ rockchip_spi_prepare_dma(rs);
+ spi_enable_chip(rs, 1);
+ } else {
+ /* tx or tr: spi must be enabled first */
+ spi_enable_chip(rs, 1);
+ rockchip_spi_prepare_dma(rs);
+ }
+ } else {
+ spi_enable_chip(rs, 1);
ret = rockchip_spi_pio_transfer(rs);
+ }
return ret;
}
sspi->word_width = DIV_ROUND_UP(bits_per_word, 8);
txfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) |
- sspi->word_width;
+ (sspi->word_width >> 1);
rxfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) |
- sspi->word_width;
+ (sspi->word_width >> 1);
if (!(spi->mode & SPI_CS_HIGH))
regval |= SIRFSOC_SPI_CS_IDLE_STAT;
sg_free_table(sgt);
return -ENOMEM;
}
- sg_buf = page_address(vm_page) +
- ((size_t)buf & ~PAGE_MASK);
+ sg_set_page(&sgt->sgl[i], vm_page,
+ min, offset_in_page(buf));
} else {
sg_buf = buf;
+ sg_set_buf(&sgt->sgl[i], sg_buf, min);
}
- sg_set_buf(&sgt->sgl[i], sg_buf, min);
buf += min;
len -= min;
struct spi_device *spi;
struct list_head device_entry;
- /* buffer is NULL unless this device is open (users > 0) */
+ /* TX/RX buffers are NULL unless this device is open (users > 0) */
struct mutex buf_lock;
unsigned users;
- u8 *buffer;
+ u8 *tx_buffer;
+ u8 *rx_buffer;
};
static LIST_HEAD(device_list);
spidev_sync_write(struct spidev_data *spidev, size_t len)
{
struct spi_transfer t = {
- .tx_buf = spidev->buffer,
+ .tx_buf = spidev->tx_buffer,
.len = len,
};
struct spi_message m;
spidev_sync_read(struct spidev_data *spidev, size_t len)
{
struct spi_transfer t = {
- .rx_buf = spidev->buffer,
+ .rx_buf = spidev->rx_buffer,
.len = len,
};
struct spi_message m;
if (status > 0) {
unsigned long missing;
- missing = copy_to_user(buf, spidev->buffer, status);
+ missing = copy_to_user(buf, spidev->rx_buffer, status);
if (missing == status)
status = -EFAULT;
else
spidev = filp->private_data;
mutex_lock(&spidev->buf_lock);
- missing = copy_from_user(spidev->buffer, buf, count);
+ missing = copy_from_user(spidev->tx_buffer, buf, count);
if (missing == 0)
status = spidev_sync_write(spidev, count);
else
struct spi_transfer *k_tmp;
struct spi_ioc_transfer *u_tmp;
unsigned n, total;
- u8 *buf;
+ u8 *tx_buf, *rx_buf;
int status = -EFAULT;
spi_message_init(&msg);
* We walk the array of user-provided transfers, using each one
* to initialize a kernel version of the same transfer.
*/
- buf = spidev->buffer;
+ tx_buf = spidev->tx_buffer;
+ rx_buf = spidev->rx_buffer;
total = 0;
for (n = n_xfers, k_tmp = k_xfers, u_tmp = u_xfers;
n;
}
if (u_tmp->rx_buf) {
- k_tmp->rx_buf = buf;
+ k_tmp->rx_buf = rx_buf;
if (!access_ok(VERIFY_WRITE, (u8 __user *)
(uintptr_t) u_tmp->rx_buf,
u_tmp->len))
goto done;
}
if (u_tmp->tx_buf) {
- k_tmp->tx_buf = buf;
- if (copy_from_user(buf, (const u8 __user *)
+ k_tmp->tx_buf = tx_buf;
+ if (copy_from_user(tx_buf, (const u8 __user *)
(uintptr_t) u_tmp->tx_buf,
u_tmp->len))
goto done;
}
- buf += k_tmp->len;
+ tx_buf += k_tmp->len;
+ rx_buf += k_tmp->len;
k_tmp->cs_change = !!u_tmp->cs_change;
k_tmp->tx_nbits = u_tmp->tx_nbits;
goto done;
/* copy any rx data out of bounce buffer */
- buf = spidev->buffer;
+ rx_buf = spidev->rx_buffer;
for (n = n_xfers, u_tmp = u_xfers; n; n--, u_tmp++) {
if (u_tmp->rx_buf) {
if (__copy_to_user((u8 __user *)
- (uintptr_t) u_tmp->rx_buf, buf,
+ (uintptr_t) u_tmp->rx_buf, rx_buf,
u_tmp->len)) {
status = -EFAULT;
goto done;
}
}
- buf += u_tmp->len;
+ rx_buf += u_tmp->len;
}
status = total;
break;
}
}
- if (status == 0) {
- if (!spidev->buffer) {
- spidev->buffer = kmalloc(bufsiz, GFP_KERNEL);
- if (!spidev->buffer) {
+
+ if (status) {
+ pr_debug("spidev: nothing for minor %d\n", iminor(inode));
+ goto err_find_dev;
+ }
+
+ if (!spidev->tx_buffer) {
+ spidev->tx_buffer = kmalloc(bufsiz, GFP_KERNEL);
+ if (!spidev->tx_buffer) {
dev_dbg(&spidev->spi->dev, "open/ENOMEM\n");
status = -ENOMEM;
+ goto err_find_dev;
}
}
- if (status == 0) {
- spidev->users++;
- filp->private_data = spidev;
- nonseekable_open(inode, filp);
+
+ if (!spidev->rx_buffer) {
+ spidev->rx_buffer = kmalloc(bufsiz, GFP_KERNEL);
+ if (!spidev->rx_buffer) {
+ dev_dbg(&spidev->spi->dev, "open/ENOMEM\n");
+ status = -ENOMEM;
+ goto err_alloc_rx_buf;
}
- } else
- pr_debug("spidev: nothing for minor %d\n", iminor(inode));
+ }
+
+ spidev->users++;
+ filp->private_data = spidev;
+ nonseekable_open(inode, filp);
+
+ mutex_unlock(&device_list_lock);
+ return 0;
+err_alloc_rx_buf:
+ kfree(spidev->tx_buffer);
+ spidev->tx_buffer = NULL;
+err_find_dev:
mutex_unlock(&device_list_lock);
return status;
}
if (!spidev->users) {
int dofree;
- kfree(spidev->buffer);
- spidev->buffer = NULL;
+ kfree(spidev->tx_buffer);
+ spidev->tx_buffer = NULL;
+
+ kfree(spidev->rx_buffer);
+ spidev->rx_buffer = NULL;
/* ... after we unbound from the underlying device? */
spin_lock_irq(&spidev->spi_lock);
struct logger_log *log = file_get_log(iocb->ki_filp);
struct logger_entry header;
struct timespec now;
- size_t len, count;
+ size_t len, count, w_off;
count = min_t(size_t, iocb->ki_nbytes, LOGGER_ENTRY_MAX_PAYLOAD);
memcpy(log->buffer + log->w_off, &header, len);
memcpy(log->buffer, (char *)&header + len, sizeof(header) - len);
- len = min(count, log->size - log->w_off);
+ /* Work with a copy until we are ready to commit the whole entry */
+ w_off = logger_offset(log, log->w_off + sizeof(struct logger_entry));
- if (copy_from_iter(log->buffer + log->w_off, len, from) != len) {
+ len = min(count, log->size - w_off);
+
+ if (copy_from_iter(log->buffer + w_off, len, from) != len) {
/*
- * Note that by not updating w_off, this abandons the
+ * Note that by not updating log->w_off, this abandons the
* portion of the new entry that *was* successfully
* copied, just above. This is intentional to avoid
* message corruption from missing fragments.
return -EFAULT;
}
- log->w_off = logger_offset(log, log->w_off + count);
+ log->w_off = logger_offset(log, w_off + count);
mutex_unlock(&log->mutex);
/* wake up any blocked readers */
config COMEDI_II_PCI20KC
tristate "Intelligent Instruments PCI-20001C carrier support"
+ depends on HAS_IOMEM
---help---
Enable support for Intelligent Instruments PCI-20001C carrier
PCI-20001, PCI-20006 and PCI-20341
config COMEDI_ADDI_APCI_3120
tristate "ADDI-DATA APCI_3120/3001 support"
depends on HAS_DMA
- depends on VIRT_TO_BUS
---help---
Enable support for ADDI-DATA APCI_3120/3001 cards
unsigned int *chanlist;
int ret;
- /* user_chanlist could be NULL for do_cmdtest ioctls */
- if (!user_chanlist)
- return 0;
-
+ cmd->chanlist = NULL;
chanlist = memdup_user(user_chanlist,
cmd->chanlist_len * sizeof(unsigned int));
if (IS_ERR(chanlist))
s = &dev->subdevices[cmd.subdev];
- /* load channel/gain list */
- ret = __comedi_get_user_chanlist(dev, s, user_chanlist, &cmd);
- if (ret)
- return ret;
+ /* user_chanlist can be NULL for COMEDI_CMDTEST ioctl */
+ if (user_chanlist) {
+ /* load channel/gain list */
+ ret = __comedi_get_user_chanlist(dev, s, user_chanlist, &cmd);
+ if (ret)
+ return ret;
+ }
ret = s->do_cmdtest(dev, s, &cmd);
+ kfree(cmd.chanlist); /* free kernel copy of user chanlist */
+
/* restore chanlist pointer before copying back */
cmd.chanlist = (unsigned int __force *)user_chanlist;
*/
-static int do_lock_ioctl(struct comedi_device *dev, unsigned int arg,
+static int do_lock_ioctl(struct comedi_device *dev, unsigned long arg,
void *file)
{
int ret = 0;
This function isn't protected by the semaphore, since
we already own the lock.
*/
-static int do_unlock_ioctl(struct comedi_device *dev, unsigned int arg,
+static int do_unlock_ioctl(struct comedi_device *dev, unsigned long arg,
void *file)
{
struct comedi_subdevice *s;
nothing
*/
-static int do_cancel_ioctl(struct comedi_device *dev, unsigned int arg,
+static int do_cancel_ioctl(struct comedi_device *dev, unsigned long arg,
void *file)
{
struct comedi_subdevice *s;
nothing
*/
-static int do_poll_ioctl(struct comedi_device *dev, unsigned int arg,
+static int do_poll_ioctl(struct comedi_device *dev, unsigned long arg,
void *file)
{
struct comedi_subdevice *s;
/* Grab all IRQ sources */
for (i = 0; i < of_cfg->irq_count; i++) {
lradc->irq[i] = platform_get_irq(pdev, i);
- if (lradc->irq[i] < 0)
- return lradc->irq[i];
+ if (lradc->irq[i] < 0) {
+ ret = lradc->irq[i];
+ goto err_clk;
+ }
ret = devm_request_irq(dev, lradc->irq[i],
mxs_lradc_handle_irq, 0,
of_cfg->irq_name[i], iio);
if (ret)
- return ret;
+ goto err_clk;
}
lradc->vref_mv = of_cfg->vref_mv;
&mxs_lradc_trigger_handler,
&mxs_lradc_buffer_ops);
if (ret)
- return ret;
+ goto err_clk;
ret = mxs_lradc_trigger_init(iio);
if (ret)
mxs_lradc_trigger_remove(iio);
err_trig:
iio_triggered_buffer_cleanup(iio);
+err_clk:
+ clk_disable_unprepare(lradc->clk);
return ret;
}
.channel = 0,
.info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED),
.address = AD5933_REG_TEMP_DATA,
+ .scan_index = -1,
.scan_type = {
.sign = 's',
.realbits = 14,
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 0,
- .extend_name = "real_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
- BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "real",
.address = AD5933_REG_REAL_DATA,
.scan_index = 0,
.scan_type = {
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 0,
- .extend_name = "imag_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |
- BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "imag",
.address = AD5933_REG_IMAG_DATA,
.scan_index = 1,
.scan_type = {
indio_dev->name = id->name;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = ad5933_channels;
- indio_dev->num_channels = 1; /* only register temp0_input */
+ indio_dev->num_channels = ARRAY_SIZE(ad5933_channels);
ret = ad5933_register_ring_funcs_and_init(indio_dev);
if (ret)
goto error_disable_reg;
- /* skip temp0_input, register in0_(real|imag)_raw */
- ret = iio_buffer_register(indio_dev, &ad5933_channels[1], 2);
+ ret = iio_buffer_register(indio_dev, ad5933_channels,
+ ARRAY_SIZE(ad5933_channels));
if (ret)
goto error_unreg_ring;
MODULE_DEVICE_TABLE(i2c, isl29028_id);
static const struct of_device_id isl29028_of_match[] = {
- { .compatible = "isil,isl29028", },
+ { .compatible = "isl,isl29028", },
+ { .compatible = "isil,isl29028", },/* deprecated, don't use */
{ },
};
MODULE_DEVICE_TABLE(of, isl29028_of_match);
u8 *tx;
u8 *rx;
struct mutex buf_lock;
- const struct iio_chan_spec *ade7758_ring_channels;
struct spi_transfer ring_xfer[4];
struct spi_message ring_msg;
/*
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 0,
- .extend_name = "raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.address = AD7758_WT(AD7758_PHASE_A, AD7758_VOLTAGE),
.scan_index = 0,
.scan_type = {
.type = IIO_CURRENT,
.indexed = 1,
.channel = 0,
- .extend_name = "raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.address = AD7758_WT(AD7758_PHASE_A, AD7758_CURRENT),
.scan_index = 1,
.scan_type = {
.type = IIO_POWER,
.indexed = 1,
.channel = 0,
- .extend_name = "apparent_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "apparent",
.address = AD7758_WT(AD7758_PHASE_A, AD7758_APP_PWR),
.scan_index = 2,
.scan_type = {
.type = IIO_POWER,
.indexed = 1,
.channel = 0,
- .extend_name = "active_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "active",
.address = AD7758_WT(AD7758_PHASE_A, AD7758_ACT_PWR),
.scan_index = 3,
.scan_type = {
.type = IIO_POWER,
.indexed = 1,
.channel = 0,
- .extend_name = "reactive_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "reactive",
.address = AD7758_WT(AD7758_PHASE_A, AD7758_REACT_PWR),
.scan_index = 4,
.scan_type = {
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 1,
- .extend_name = "raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.address = AD7758_WT(AD7758_PHASE_B, AD7758_VOLTAGE),
.scan_index = 5,
.scan_type = {
.type = IIO_CURRENT,
.indexed = 1,
.channel = 1,
- .extend_name = "raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.address = AD7758_WT(AD7758_PHASE_B, AD7758_CURRENT),
.scan_index = 6,
.scan_type = {
.type = IIO_POWER,
.indexed = 1,
.channel = 1,
- .extend_name = "apparent_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "apparent",
.address = AD7758_WT(AD7758_PHASE_B, AD7758_APP_PWR),
.scan_index = 7,
.scan_type = {
.type = IIO_POWER,
.indexed = 1,
.channel = 1,
- .extend_name = "active_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "active",
.address = AD7758_WT(AD7758_PHASE_B, AD7758_ACT_PWR),
.scan_index = 8,
.scan_type = {
.type = IIO_POWER,
.indexed = 1,
.channel = 1,
- .extend_name = "reactive_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "reactive",
.address = AD7758_WT(AD7758_PHASE_B, AD7758_REACT_PWR),
.scan_index = 9,
.scan_type = {
.type = IIO_VOLTAGE,
.indexed = 1,
.channel = 2,
- .extend_name = "raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.address = AD7758_WT(AD7758_PHASE_C, AD7758_VOLTAGE),
.scan_index = 10,
.scan_type = {
.type = IIO_CURRENT,
.indexed = 1,
.channel = 2,
- .extend_name = "raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
.address = AD7758_WT(AD7758_PHASE_C, AD7758_CURRENT),
.scan_index = 11,
.scan_type = {
.type = IIO_POWER,
.indexed = 1,
.channel = 2,
- .extend_name = "apparent_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "apparent",
.address = AD7758_WT(AD7758_PHASE_C, AD7758_APP_PWR),
.scan_index = 12,
.scan_type = {
.type = IIO_POWER,
.indexed = 1,
.channel = 2,
- .extend_name = "active_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "active",
.address = AD7758_WT(AD7758_PHASE_C, AD7758_ACT_PWR),
.scan_index = 13,
.scan_type = {
.type = IIO_POWER,
.indexed = 1,
.channel = 2,
- .extend_name = "reactive_raw",
- .info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
- .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE),
+ .extend_name = "reactive",
.address = AD7758_WT(AD7758_PHASE_C, AD7758_REACT_PWR),
.scan_index = 14,
.scan_type = {
goto error_free_rx;
}
st->us = spi;
- st->ade7758_ring_channels = &ade7758_channels[0];
mutex_init(&st->buf_lock);
indio_dev->name = spi->dev.driver->name;
indio_dev->dev.parent = &spi->dev;
indio_dev->info = &ade7758_info;
indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = ade7758_channels;
+ indio_dev->num_channels = ARRAY_SIZE(ade7758_channels);
ret = ade7758_configure_ring(indio_dev);
if (ret)
**/
static int ade7758_ring_preenable(struct iio_dev *indio_dev)
{
- struct ade7758_state *st = iio_priv(indio_dev);
unsigned channel;
- if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength))
+ if (bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength))
return -EINVAL;
channel = find_first_bit(indio_dev->active_scan_mask,
indio_dev->masklength);
ade7758_write_waveform_type(&indio_dev->dev,
- st->ade7758_ring_channels[channel].address);
+ indio_dev->channels[channel].address);
return 0;
}
if (check_fwstate(pmlmepriv, _FW_LINKED) == true)
rtw_lps_ctrl_wk_cmd(padapter, LPS_CTRL_SCAN, 1);
- ph2c = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL);
+ ph2c = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC);
if (ph2c == NULL)
return _FAIL;
- psurveyPara = kzalloc(sizeof(struct sitesurvey_parm), GFP_KERNEL);
+ psurveyPara = kzalloc(sizeof(struct sitesurvey_parm), GFP_ATOMIC);
if (psurveyPara == NULL) {
kfree(ph2c);
return _FAIL;
else
RT_TRACE(_module_rtl871x_cmd_c_, _drv_notice_, ("+Join cmd: SSid =[%s]\n", pmlmepriv->assoc_ssid.Ssid));
- pcmd = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL);
+ pcmd = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC);
if (pcmd == NULL) {
res = _FAIL;
RT_TRACE(_module_rtl871x_cmd_c_, _drv_err_, ("rtw_joinbss_cmd: memory allocate for cmd_obj fail!!!\n"));
u8 res = _SUCCESS;
- ph2c = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL);
+ ph2c = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC);
if (ph2c == NULL) {
res = _FAIL;
goto exit;
}
- pdrvextra_cmd_parm = kzalloc(sizeof(struct drvextra_cmd_parm), GFP_KERNEL);
+ pdrvextra_cmd_parm = kzalloc(sizeof(struct drvextra_cmd_parm), GFP_ATOMIC);
if (pdrvextra_cmd_parm == NULL) {
kfree(ph2c);
res = _FAIL;
u8 res = _SUCCESS;
if (enqueue) {
- ph2c = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL);
+ ph2c = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC);
if (ph2c == NULL) {
res = _FAIL;
goto exit;
}
- pdrvextra_cmd_parm = kzalloc(sizeof(struct drvextra_cmd_parm), GFP_KERNEL);
+ pdrvextra_cmd_parm = kzalloc(sizeof(struct drvextra_cmd_parm), GFP_ATOMIC);
if (pdrvextra_cmd_parm == NULL) {
kfree(ph2c);
res = _FAIL;
u8 res = _SUCCESS;
- ph2c = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL);
+ ph2c = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC);
if (ph2c == NULL) {
res = _FAIL;
goto exit;
}
- pdrvextra_cmd_parm = kzalloc(sizeof(struct drvextra_cmd_parm), GFP_KERNEL);
+ pdrvextra_cmd_parm = kzalloc(sizeof(struct drvextra_cmd_parm), GFP_ATOMIC);
if (pdrvextra_cmd_parm == NULL) {
kfree(ph2c);
res = _FAIL;
u8 res = _SUCCESS;
- ppscmd = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL);
+ ppscmd = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC);
if (ppscmd == NULL) {
res = _FAIL;
goto exit;
}
- pdrvextra_cmd_parm = kzalloc(sizeof(struct drvextra_cmd_parm), GFP_KERNEL);
+ pdrvextra_cmd_parm = kzalloc(sizeof(struct drvextra_cmd_parm), GFP_ATOMIC);
if (pdrvextra_cmd_parm == NULL) {
kfree(ppscmd);
res = _FAIL;
pcmdpriv = &padapter->cmdpriv;
- pcmd_obj = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL);
+ pcmd_obj = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC);
if (pcmd_obj == NULL)
return;
cmdsz = (sizeof(struct survey_event) + sizeof(struct C2HEvent_Header));
- pevtcmd = kzalloc(cmdsz, GFP_KERNEL);
+ pevtcmd = kzalloc(cmdsz, GFP_ATOMIC);
if (pevtcmd == NULL) {
kfree(pcmd_obj);
return;
struct mlme_ext_info *pmlmeinfo = &(pmlmeext->mlmext_info);
struct cmd_priv *pcmdpriv = &padapter->cmdpriv;
- pcmd_obj = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL);
+ pcmd_obj = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC);
if (pcmd_obj == NULL)
return;
cmdsz = (sizeof(struct joinbss_event) + sizeof(struct C2HEvent_Header));
- pevtcmd = kzalloc(cmdsz, GFP_KERNEL);
+ pevtcmd = kzalloc(cmdsz, GFP_ATOMIC);
if (pevtcmd == NULL) {
kfree(pcmd_obj);
return;
pmlmeext->scan_abort = false;/* reset */
}
- ph2c = kzalloc(sizeof(struct cmd_obj), GFP_KERNEL);
+ ph2c = kzalloc(sizeof(struct cmd_obj), GFP_ATOMIC);
if (ph2c == NULL)
goto exit_survey_timer_hdl;
- psurveyPara = kzalloc(sizeof(struct sitesurvey_parm), GFP_KERNEL);
+ psurveyPara = kzalloc(sizeof(struct sitesurvey_parm), GFP_ATOMIC);
if (psurveyPara == NULL) {
kfree(ph2c);
goto exit_survey_timer_hdl;
return true;
}
- bssid = kzalloc(sizeof(struct wlan_bssid_ex), GFP_KERNEL);
+ bssid = kzalloc(sizeof(struct wlan_bssid_ex), GFP_ATOMIC);
subtype = GetFrameSubType(pframe) >> 4;
{USB_DEVICE(0x07b8, 0x8179)}, /* Abocom - Abocom */
{USB_DEVICE(0x2001, 0x330F)}, /* DLink DWA-125 REV D1 */
{USB_DEVICE(0x2001, 0x3310)}, /* Dlink DWA-123 REV D1 */
+ {USB_DEVICE(0x2001, 0x3311)}, /* DLink GO-USB-N150 REV B1 */
{USB_DEVICE(0x0df6, 0x0076)}, /* Sitecom N150 v2 */
{} /* Terminating entry */
};
};
struct eeprom_priv {
+ u8 mac_addr[6]; /* PermanentAddress */
u8 bautoload_fail_flag;
u8 bloadfile_fail_flag;
u8 bloadmac_fail_flag;
/* u8 bempty; */
/* u8 sys_config; */
- u8 mac_addr[6]; /* PermanentAddress */
/* u8 config0; */
u16 channel_plan;
/* u8 country_string[3]; */
Say Y here to enable the TCM/pSCSI subsystem plugin for non-buffered
passthrough access to Linux/SCSI device
+config TCM_USER
+ tristate "TCM/USER Subsystem Plugin for Linux"
+ depends on UIO && NET
+ help
+ Say Y here to enable the TCM/USER subsystem plugin for a userspace
+ process to handle requests
+
source "drivers/target/loopback/Kconfig"
source "drivers/target/tcm_fc/Kconfig"
source "drivers/target/iscsi/Kconfig"
obj-$(CONFIG_TCM_IBLOCK) += target_core_iblock.o
obj-$(CONFIG_TCM_FILEIO) += target_core_file.o
obj-$(CONFIG_TCM_PSCSI) += target_core_pscsi.o
+obj-$(CONFIG_TCM_USER) += target_core_user.o
# Fabric modules
obj-$(CONFIG_LOOPBACK_TARGET) += loopback/
len = sprintf(buf, "TargetAddress="
"%s:%hu,%hu",
inaddr_any ? conn->local_ip : np->np_ip,
- inaddr_any ? conn->local_port : np->np_port,
+ np->np_port,
tpg->tpgt);
len += 1;
struct task_struct *p,
int mode)
{
- char buf[128];
/*
* mode == 1 signals iscsi_target_tx_thread() usage.
* mode == 0 signals iscsi_target_rx_thread() usage.
* both TX and RX kthreads are scheduled to run on the
* same CPU.
*/
- memset(buf, 0, 128);
- cpumask_scnprintf(buf, 128, conn->conn_cpumask);
set_cpus_allowed_ptr(p, conn->conn_cpumask);
}
if (conn->conn_tx_hash.tfm)
crypto_free_hash(conn->conn_tx_hash.tfm);
- if (conn->conn_cpumask)
- free_cpumask_var(conn->conn_cpumask);
+ free_cpumask_var(conn->conn_cpumask);
kfree(conn->conn_ops);
conn->conn_ops = NULL;
} else {
sess = se_sess->fabric_sess_ptr;
- if (sess->sess_ops->InitiatorName)
- rb += sprintf(page+rb, "InitiatorName: %s\n",
- sess->sess_ops->InitiatorName);
- if (sess->sess_ops->InitiatorAlias)
- rb += sprintf(page+rb, "InitiatorAlias: %s\n",
- sess->sess_ops->InitiatorAlias);
+ rb += sprintf(page+rb, "InitiatorName: %s\n",
+ sess->sess_ops->InitiatorName);
+ rb += sprintf(page+rb, "InitiatorAlias: %s\n",
+ sess->sess_ops->InitiatorAlias);
rb += sprintf(page+rb, "LIO Session ID: %u "
"ISID: 0x%02x %02x %02x %02x %02x %02x "
struct iscsi_cmd *cmd,
unsigned char *buf)
{
- int dump = 0, recovery = 0;
u32 data_sn = 0;
struct iscsi_conn *conn = cmd->conn;
struct iscsi_data *hdr = (struct iscsi_data *) buf;
pr_err("Command ITT: 0x%08x, received DataSN: 0x%08x"
" higher than expected 0x%08x.\n", cmd->init_task_tag,
be32_to_cpu(hdr->datasn), data_sn);
- recovery = 1;
goto recover;
} else if (be32_to_cpu(hdr->datasn) < data_sn) {
pr_err("Command ITT: 0x%08x, received DataSN: 0x%08x"
" lower than expected 0x%08x, discarding payload.\n",
cmd->init_task_tag, be32_to_cpu(hdr->datasn), data_sn);
- dump = 1;
goto dump;
}
if (iscsit_dump_data_payload(conn, payload_length, 1) < 0)
return DATAOUT_CANNOT_RECOVER;
- return (recovery || dump) ? DATAOUT_WITHIN_COMMAND_RECOVERY :
- DATAOUT_NORMAL;
+ return DATAOUT_WITHIN_COMMAND_RECOVERY;
}
static int iscsit_dataout_pre_datapduinorder_yes(
return 0;
fail:
np->np_socket = NULL;
- if (sock)
- sock_release(sock);
+ sock_release(sock);
return ret;
}
if (!IS_ERR(conn->conn_tx_hash.tfm))
crypto_free_hash(conn->conn_tx_hash.tfm);
- if (conn->conn_cpumask)
- free_cpumask_var(conn->conn_cpumask);
+ free_cpumask_var(conn->conn_cpumask);
kfree(conn->conn_ops);
iscsit_put_transport(conn->conn_transport);
kfree(conn);
conn = NULL;
- if (ret == -ENODEV)
- goto out;
/* Get another socket */
return 1;
}
if (conn->param_list)
intrname = iscsi_find_param_from_key(INITIATORNAME,
conn->param_list);
- strcpy(ls->last_intr_fail_name,
- (intrname ? intrname->value : "Unknown"));
+ strlcpy(ls->last_intr_fail_name,
+ (intrname ? intrname->value : "Unknown"),
+ sizeof(ls->last_intr_fail_name));
ls->last_intr_fail_ip_family = conn->login_family;
*/
struct device *tcm_loop_primary;
-/*
- * Copied from drivers/scsi/libfc/fc_fcp.c:fc_change_queue_depth() and
- * drivers/scsi/libiscsi.c:iscsi_change_queue_depth()
- */
-static int tcm_loop_change_queue_depth(
- struct scsi_device *sdev,
- int depth,
- int reason)
-{
- switch (reason) {
- case SCSI_QDEPTH_DEFAULT:
- scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
- break;
- case SCSI_QDEPTH_QFULL:
- scsi_track_queue_full(sdev, depth);
- break;
- case SCSI_QDEPTH_RAMP_UP:
- scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
- break;
- default:
- return -EOPNOTSUPP;
- }
- return sdev->queue_depth;
-}
-
-static int tcm_loop_change_queue_type(struct scsi_device *sdev, int tag)
-{
- if (sdev->tagged_supported) {
- scsi_set_tag_type(sdev, tag);
-
- if (tag)
- scsi_activate_tcq(sdev, sdev->queue_depth);
- else
- scsi_deactivate_tcq(sdev, sdev->queue_depth);
- } else
- tag = 0;
-
- return tag;
-}
-
-/*
- * Locate the SAM Task Attr from struct scsi_cmnd *
- */
-static int tcm_loop_sam_attr(struct scsi_cmnd *sc)
-{
- if (sc->device->tagged_supported) {
- switch (sc->tag) {
- case HEAD_OF_QUEUE_TAG:
- return MSG_HEAD_TAG;
- case ORDERED_QUEUE_TAG:
- return MSG_ORDERED_TAG;
- default:
- break;
- }
- }
-
- return MSG_SIMPLE_TAG;
-}
-
static void tcm_loop_submission_work(struct work_struct *work)
{
struct tcm_loop_cmd *tl_cmd =
rc = target_submit_cmd_map_sgls(se_cmd, tl_nexus->se_sess, sc->cmnd,
&tl_cmd->tl_sense_buf[0], tl_cmd->sc->device->lun,
- transfer_length, tcm_loop_sam_attr(sc),
+ transfer_length, MSG_SIMPLE_TAG,
sc->sc_data_direction, 0,
scsi_sglist(sc), scsi_sg_count(sc),
sgl_bidi, sgl_bidi_count,
}
tl_cmd->sc = sc;
- tl_cmd->sc_cmd_tag = sc->tag;
+ tl_cmd->sc_cmd_tag = sc->request->tag;
INIT_WORK(&tl_cmd->work, tcm_loop_submission_work);
queue_work(tcm_loop_workqueue, &tl_cmd->work);
return 0;
*/
tl_tpg = &tl_hba->tl_hba_tpgs[sc->device->id];
ret = tcm_loop_issue_tmr(tl_tpg, tl_nexus, sc->device->lun,
- sc->tag, TMR_ABORT_TASK);
+ sc->request->tag, TMR_ABORT_TASK);
return (ret == TMR_FUNCTION_COMPLETE) ? SUCCESS : FAILED;
}
return 0;
}
-static int tcm_loop_slave_configure(struct scsi_device *sd)
-{
- if (sd->tagged_supported) {
- scsi_activate_tcq(sd, sd->queue_depth);
- scsi_adjust_queue_depth(sd, MSG_SIMPLE_TAG,
- sd->host->cmd_per_lun);
- } else {
- scsi_adjust_queue_depth(sd, 0,
- sd->host->cmd_per_lun);
- }
-
- return 0;
-}
-
static struct scsi_host_template tcm_loop_driver_template = {
.show_info = tcm_loop_show_info,
.proc_name = "tcm_loopback",
.name = "TCM_Loopback",
.queuecommand = tcm_loop_queuecommand,
- .change_queue_depth = tcm_loop_change_queue_depth,
- .change_queue_type = tcm_loop_change_queue_type,
+ .change_queue_depth = scsi_change_queue_depth,
+ .change_queue_type = scsi_change_queue_type,
.eh_abort_handler = tcm_loop_abort_task,
.eh_device_reset_handler = tcm_loop_device_reset,
.eh_target_reset_handler = tcm_loop_target_reset,
.max_sectors = 0xFFFF,
.use_clustering = DISABLE_CLUSTERING,
.slave_alloc = tcm_loop_slave_alloc,
- .slave_configure = tcm_loop_slave_configure,
.module = THIS_MODULE,
+ .use_blk_tags = 1,
+ .track_queue_depth = 1,
};
static int tcm_loop_driver_probe(struct device *dev)
struct tcm_loop_tpg, tl_se_tpg);
struct tcm_loop_hba *tl_hba = tl_tpg->tl_hba;
- atomic_inc(&tl_tpg->tl_tpg_port_count);
- smp_mb__after_atomic();
+ atomic_inc_mb(&tl_tpg->tl_tpg_port_count);
/*
* Add Linux/SCSI struct scsi_device by HCTL
*/
scsi_remove_device(sd);
scsi_device_put(sd);
- atomic_dec(&tl_tpg->tl_tpg_port_count);
- smp_mb__after_atomic();
+ atomic_dec_mb(&tl_tpg->tl_tpg_port_count);
pr_debug("TCM_Loop_ConfigFS: Port Unlink Successful\n");
}
if (tg_pt_id != tg_pt_gp->tg_pt_gp_id)
continue;
- atomic_inc(&tg_pt_gp->tg_pt_gp_ref_cnt);
- smp_mb__after_atomic();
+ atomic_inc_mb(&tg_pt_gp->tg_pt_gp_ref_cnt);
spin_unlock(&dev->t10_alua.tg_pt_gps_lock);
found = true;
spin_lock(&dev->t10_alua.tg_pt_gps_lock);
- atomic_dec(&tg_pt_gp->tg_pt_gp_ref_cnt);
- smp_mb__after_atomic();
+ atomic_dec_mb(&tg_pt_gp->tg_pt_gp_ref_cnt);
break;
}
spin_unlock(&dev->t10_alua.tg_pt_gps_lock);
case SEND_DIAGNOSTIC:
case READ_CAPACITY:
return 0;
- case SERVICE_ACTION_IN:
+ case SERVICE_ACTION_IN_16:
switch (cdb[1] & 0x1f) {
case SAI_READ_CAPACITY_16:
return 0;
* every I_T nexus other than the I_T nexus on which the SET
* TARGET PORT GROUPS command
*/
- atomic_inc(&mem->tg_pt_gp_mem_ref_cnt);
- smp_mb__after_atomic();
+ atomic_inc_mb(&mem->tg_pt_gp_mem_ref_cnt);
spin_unlock(&tg_pt_gp->tg_pt_gp_lock);
spin_lock_bh(&port->sep_alua_lock);
spin_unlock_bh(&port->sep_alua_lock);
spin_lock(&tg_pt_gp->tg_pt_gp_lock);
- atomic_dec(&mem->tg_pt_gp_mem_ref_cnt);
- smp_mb__after_atomic();
+ atomic_dec_mb(&mem->tg_pt_gp_mem_ref_cnt);
}
spin_unlock(&tg_pt_gp->tg_pt_gp_lock);
/*
core_alua_dump_state(tg_pt_gp->tg_pt_gp_alua_pending_state));
spin_lock(&dev->t10_alua.tg_pt_gps_lock);
atomic_dec(&tg_pt_gp->tg_pt_gp_ref_cnt);
- smp_mb__after_atomic();
spin_unlock(&dev->t10_alua.tg_pt_gps_lock);
if (tg_pt_gp->tg_pt_gp_transition_complete)
*/
spin_lock(&dev->t10_alua.tg_pt_gps_lock);
atomic_inc(&tg_pt_gp->tg_pt_gp_ref_cnt);
- smp_mb__after_atomic();
spin_unlock(&dev->t10_alua.tg_pt_gps_lock);
if (!explicit && tg_pt_gp->tg_pt_gp_implicit_trans_secs) {
spin_lock(&local_lu_gp_mem->lu_gp_mem_lock);
lu_gp = local_lu_gp_mem->lu_gp;
atomic_inc(&lu_gp->lu_gp_ref_cnt);
- smp_mb__after_atomic();
spin_unlock(&local_lu_gp_mem->lu_gp_mem_lock);
/*
* For storage objects that are members of the 'default_lu_gp',
l_tg_pt_gp->tg_pt_gp_alua_nacl = l_nacl;
rc = core_alua_do_transition_tg_pt(l_tg_pt_gp,
new_state, explicit);
- atomic_dec(&lu_gp->lu_gp_ref_cnt);
- smp_mb__after_atomic();
+ atomic_dec_mb(&lu_gp->lu_gp_ref_cnt);
return rc;
}
/*
lu_gp_mem_list) {
dev = lu_gp_mem->lu_gp_mem_dev;
- atomic_inc(&lu_gp_mem->lu_gp_mem_ref_cnt);
- smp_mb__after_atomic();
+ atomic_inc_mb(&lu_gp_mem->lu_gp_mem_ref_cnt);
spin_unlock(&lu_gp->lu_gp_lock);
spin_lock(&dev->t10_alua.tg_pt_gps_lock);
tg_pt_gp->tg_pt_gp_alua_port = NULL;
tg_pt_gp->tg_pt_gp_alua_nacl = NULL;
}
- atomic_inc(&tg_pt_gp->tg_pt_gp_ref_cnt);
- smp_mb__after_atomic();
+ atomic_inc_mb(&tg_pt_gp->tg_pt_gp_ref_cnt);
spin_unlock(&dev->t10_alua.tg_pt_gps_lock);
/*
* core_alua_do_transition_tg_pt() will always return
new_state, explicit);
spin_lock(&dev->t10_alua.tg_pt_gps_lock);
- atomic_dec(&tg_pt_gp->tg_pt_gp_ref_cnt);
- smp_mb__after_atomic();
+ atomic_dec_mb(&tg_pt_gp->tg_pt_gp_ref_cnt);
if (rc)
break;
}
spin_unlock(&dev->t10_alua.tg_pt_gps_lock);
spin_lock(&lu_gp->lu_gp_lock);
- atomic_dec(&lu_gp_mem->lu_gp_mem_ref_cnt);
- smp_mb__after_atomic();
+ atomic_dec_mb(&lu_gp_mem->lu_gp_mem_ref_cnt);
}
spin_unlock(&lu_gp->lu_gp_lock);
core_alua_dump_state(new_state));
}
- atomic_dec(&lu_gp->lu_gp_ref_cnt);
- smp_mb__after_atomic();
+ atomic_dec_mb(&lu_gp->lu_gp_ref_cnt);
return rc;
}
DEF_DEV_ATTRIB(emulate_rest_reord);
SE_DEV_ATTR(emulate_rest_reord, S_IRUGO | S_IWUSR);
+DEF_DEV_ATTRIB(force_pr_aptpl);
+SE_DEV_ATTR(force_pr_aptpl, S_IRUGO | S_IWUSR);
+
DEF_DEV_ATTRIB_RO(hw_block_size);
SE_DEV_ATTR_RO(hw_block_size);
&target_core_dev_attrib_hw_pi_prot_type.attr,
&target_core_dev_attrib_pi_prot_format.attr,
&target_core_dev_attrib_enforce_pr_isids.attr,
+ &target_core_dev_attrib_force_pr_aptpl.attr,
&target_core_dev_attrib_is_nonrot.attr,
&target_core_dev_attrib_emulate_rest_reord.attr,
&target_core_dev_attrib_hw_block_size.attr,
{
unsigned char *i_fabric = NULL, *i_port = NULL, *isid = NULL;
unsigned char *t_fabric = NULL, *t_port = NULL;
- char *orig, *ptr, *arg_p, *opts;
+ char *orig, *ptr, *opts;
substring_t args[MAX_OPT_ARGS];
unsigned long long tmp_ll;
u64 sa_res_key = 0;
token = match_token(ptr, tokens, args);
switch (token) {
case Opt_initiator_fabric:
- i_fabric = match_strdup(&args[0]);
+ i_fabric = match_strdup(args);
if (!i_fabric) {
ret = -ENOMEM;
goto out;
}
break;
case Opt_initiator_node:
- i_port = match_strdup(&args[0]);
+ i_port = match_strdup(args);
if (!i_port) {
ret = -ENOMEM;
goto out;
}
break;
case Opt_initiator_sid:
- isid = match_strdup(&args[0]);
+ isid = match_strdup(args);
if (!isid) {
ret = -ENOMEM;
goto out;
}
break;
case Opt_sa_res_key:
- arg_p = match_strdup(&args[0]);
- if (!arg_p) {
- ret = -ENOMEM;
- goto out;
- }
- ret = kstrtoull(arg_p, 0, &tmp_ll);
+ ret = kstrtoull(args->from, 0, &tmp_ll);
if (ret < 0) {
- pr_err("kstrtoull() failed for"
- " sa_res_key=\n");
+ pr_err("kstrtoull() failed for sa_res_key=\n");
goto out;
}
sa_res_key = (u64)tmp_ll;
* PR APTPL Metadata for Target Port
*/
case Opt_target_fabric:
- t_fabric = match_strdup(&args[0]);
+ t_fabric = match_strdup(args);
if (!t_fabric) {
ret = -ENOMEM;
goto out;
}
break;
case Opt_target_node:
- t_port = match_strdup(&args[0]);
+ t_port = match_strdup(args);
if (!t_port) {
ret = -ENOMEM;
goto out;
if (port->sep_rtpi != rtpi)
continue;
- atomic_inc(&deve->pr_ref_count);
- smp_mb__after_atomic();
+ atomic_inc_mb(&deve->pr_ref_count);
spin_unlock_irq(&nacl->device_list_lock);
return deve;
return 0;
}
+int se_dev_set_force_pr_aptpl(struct se_device *dev, int flag)
+{
+ if ((flag != 0) && (flag != 1)) {
+ printk(KERN_ERR "Illegal value %d\n", flag);
+ return -EINVAL;
+ }
+ if (dev->export_count) {
+ pr_err("dev[%p]: Unable to set force_pr_aptpl while"
+ " export_count is %d\n", dev, dev->export_count);
+ return -EINVAL;
+ }
+
+ dev->dev_attrib.force_pr_aptpl = flag;
+ pr_debug("dev[%p]: SE Device force_pr_aptpl: %d\n", dev, flag);
+ return 0;
+}
+
int se_dev_set_is_nonrot(struct se_device *dev, int flag)
{
if ((flag != 0) && (flag != 1)) {
*
*
*/
-int core_dev_del_lun(
+void core_dev_del_lun(
struct se_portal_group *tpg,
- u32 unpacked_lun)
+ struct se_lun *lun)
{
- struct se_lun *lun;
-
- lun = core_tpg_pre_dellun(tpg, unpacked_lun);
- if (IS_ERR(lun))
- return PTR_ERR(lun);
-
- core_tpg_post_dellun(tpg, lun);
-
- pr_debug("%s_TPG[%u]_LUN[%u] - Deactivated %s Logical Unit from"
+ pr_debug("%s_TPG[%u]_LUN[%u] - Deactivating %s Logical Unit from"
" device object\n", tpg->se_tpg_tfo->get_fabric_name(),
- tpg->se_tpg_tfo->tpg_get_tag(tpg), unpacked_lun,
+ tpg->se_tpg_tfo->tpg_get_tag(tpg), lun->unpacked_lun,
tpg->se_tpg_tfo->get_fabric_name());
- return 0;
+ core_tpg_remove_lun(tpg, lun);
}
struct se_lun *core_get_lun_from_tpg(struct se_portal_group *tpg, u32 unpacked_lun)
spin_lock(&lun->lun_acl_lock);
list_add_tail(&lacl->lacl_list, &lun->lun_acl_list);
- atomic_inc(&lun->lun_acl_count);
- smp_mb__after_atomic();
+ atomic_inc_mb(&lun->lun_acl_count);
spin_unlock(&lun->lun_acl_lock);
pr_debug("%s_TPG[%hu]_LUN[%u->%u] - Added %s ACL for "
* Check to see if there are any existing persistent reservation APTPL
* pre-registrations that need to be enabled for this LUN ACL..
*/
- core_scsi3_check_aptpl_registration(lun->lun_se_dev, tpg, lun, lacl);
+ core_scsi3_check_aptpl_registration(lun->lun_se_dev, tpg, lun, nacl,
+ lacl->mapped_lun);
return 0;
}
spin_lock(&lun->lun_acl_lock);
list_del(&lacl->lacl_list);
- atomic_dec(&lun->lun_acl_count);
- smp_mb__after_atomic();
+ atomic_dec_mb(&lun->lun_acl_count);
spin_unlock(&lun->lun_acl_lock);
core_disable_device_list_for_node(lun, NULL, lacl->mapped_lun,
dev->dev_attrib.emulate_3pc = DA_EMULATE_3PC;
dev->dev_attrib.pi_prot_type = TARGET_DIF_TYPE0_PROT;
dev->dev_attrib.enforce_pr_isids = DA_ENFORCE_PR_ISIDS;
+ dev->dev_attrib.force_pr_aptpl = DA_FORCE_PR_APTPL;
dev->dev_attrib.is_nonrot = DA_IS_NONROT;
dev->dev_attrib.emulate_rest_reord = DA_EMULATE_REST_REORD;
dev->dev_attrib.max_unmap_lba_count = DA_MAX_UNMAP_LBA_COUNT;
struct se_node_acl, acl_group);
struct se_portal_group *se_tpg = se_nacl->se_tpg;
struct target_fabric_configfs *tf = se_tpg->se_tpg_wwn->wwn_tf;
- struct se_lun_acl *lacl;
+ struct se_lun_acl *lacl = NULL;
struct config_item *acl_ci;
struct config_group *lacl_cg = NULL, *ml_stat_grp = NULL;
char *buf;
out:
if (lacl_cg)
kfree(lacl_cg->default_groups);
+ kfree(lacl);
kfree(buf);
return ERR_PTR(ret);
}
tf->tf_ops.fabric_pre_unlink(se_tpg, lun);
}
- core_dev_del_lun(se_tpg, lun->unpacked_lun);
+ core_dev_del_lun(se_tpg, lun);
return 0;
}
GFP_KERNEL);
if (!port_stat_grp->default_groups) {
pr_err("Unable to allocate port_stat_grp->default_groups\n");
- errno = -ENOMEM;
- goto out;
+ kfree(lun_cg->default_groups);
+ return ERR_PTR(-ENOMEM);
}
target_stat_setup_port_default_groups(lun);
return &lun->lun_group;
-out:
- if (lun_cg)
- kfree(lun_cg->default_groups);
- return ERR_PTR(errno);
}
static void target_fabric_drop_lun(
* If the caller wants the TransportID Length, we set that value for the
* entire iSCSI Tarnsport ID now.
*/
- if (out_tid_len != NULL) {
- add_len = ((buf[2] >> 8) & 0xff);
- add_len |= (buf[3] & 0xff);
+ if (out_tid_len) {
+ /* The shift works thanks to integer promotion rules */
+ add_len = (buf[2] << 8) | buf[3];
tid_len = strlen(&buf[4]);
tid_len += 4; /* Add four bytes for iSCSI Transport ID header */
} else {
start = cmd->t_task_lba * dev->dev_attrib.block_size;
if (cmd->data_length)
- end = start + cmd->data_length;
+ end = start + cmd->data_length - 1;
else
end = LLONG_MAX;
}
struct fd_dev *fd_dev = FD_DEV(dev);
loff_t start = cmd->t_task_lba *
dev->dev_attrib.block_size;
- loff_t end = start + cmd->data_length;
+ loff_t end;
+
+ if (cmd->data_length)
+ end = start + cmd->data_length - 1;
+ else
+ end = LLONG_MAX;
vfs_fsync_range(fd_dev->fd_file, start, end, 1);
}
fd_dev->fbd_flags |= FBDF_HAS_SIZE;
break;
case Opt_fd_buffered_io:
- match_int(args, &arg);
+ ret = match_int(args, &arg);
+ if (ret)
+ goto out;
if (arg != 1) {
pr_err("bogus fd_buffered_io=%d value\n", arg);
ret = -EINVAL;
int se_dev_set_pi_prot_type(struct se_device *, int);
int se_dev_set_pi_prot_format(struct se_device *, int);
int se_dev_set_enforce_pr_isids(struct se_device *, int);
+int se_dev_set_force_pr_aptpl(struct se_device *, int);
int se_dev_set_is_nonrot(struct se_device *, int);
int se_dev_set_emulate_rest_reord(struct se_device *dev, int);
int se_dev_set_queue_depth(struct se_device *, u32);
int se_dev_set_optimal_sectors(struct se_device *, u32);
int se_dev_set_block_size(struct se_device *, u32);
struct se_lun *core_dev_add_lun(struct se_portal_group *, struct se_device *, u32);
-int core_dev_del_lun(struct se_portal_group *, u32);
+void core_dev_del_lun(struct se_portal_group *, struct se_lun *);
struct se_lun *core_get_lun_from_tpg(struct se_portal_group *, u32);
struct se_lun_acl *core_dev_init_initiator_node_lun_acl(struct se_portal_group *,
struct se_node_acl *, u32, int *);
struct se_lun *core_tpg_alloc_lun(struct se_portal_group *, u32);
int core_tpg_add_lun(struct se_portal_group *, struct se_lun *,
u32, struct se_device *);
-struct se_lun *core_tpg_pre_dellun(struct se_portal_group *, u32 unpacked_lun);
-int core_tpg_post_dellun(struct se_portal_group *, struct se_lun *);
+void core_tpg_remove_lun(struct se_portal_group *, struct se_lun *);
/* target_core_transport.c */
extern struct kmem_cache *se_tmr_req_cache;
case ACCESS_CONTROL_OUT:
case INQUIRY:
case LOG_SENSE:
- case READ_MEDIA_SERIAL_NUMBER:
+ case SERVICE_ACTION_IN_12:
case REPORT_LUNS:
case REQUEST_SENSE:
case PERSISTENT_RESERVE_IN:
*/
spin_lock(&dev->se_port_lock);
list_for_each_entry_safe(port, port_tmp, &dev->dev_sep_list, sep_list) {
- atomic_inc(&port->sep_tg_pt_ref_cnt);
- smp_mb__after_atomic();
+ atomic_inc_mb(&port->sep_tg_pt_ref_cnt);
spin_unlock(&dev->se_port_lock);
spin_lock_bh(&port->sep_alua_lock);
if (strcmp(nacl->initiatorname, nacl_tmp->initiatorname))
continue;
- atomic_inc(&deve_tmp->pr_ref_count);
- smp_mb__after_atomic();
+ atomic_inc_mb(&deve_tmp->pr_ref_count);
spin_unlock_bh(&port->sep_alua_lock);
/*
* Grab a configfs group dependency that is released
if (ret < 0) {
pr_err("core_scsi3_lunacl_depend"
"_item() failed\n");
- atomic_dec(&port->sep_tg_pt_ref_cnt);
- smp_mb__after_atomic();
- atomic_dec(&deve_tmp->pr_ref_count);
- smp_mb__after_atomic();
+ atomic_dec_mb(&port->sep_tg_pt_ref_cnt);
+ atomic_dec_mb(&deve_tmp->pr_ref_count);
goto out;
}
/*
nacl_tmp, deve_tmp, NULL,
sa_res_key, all_tg_pt, aptpl);
if (!pr_reg_atp) {
- atomic_dec(&port->sep_tg_pt_ref_cnt);
- smp_mb__after_atomic();
- atomic_dec(&deve_tmp->pr_ref_count);
- smp_mb__after_atomic();
+ atomic_dec_mb(&port->sep_tg_pt_ref_cnt);
+ atomic_dec_mb(&deve_tmp->pr_ref_count);
core_scsi3_lunacl_undepend_item(deve_tmp);
goto out;
}
spin_unlock_bh(&port->sep_alua_lock);
spin_lock(&dev->se_port_lock);
- atomic_dec(&port->sep_tg_pt_ref_cnt);
- smp_mb__after_atomic();
+ atomic_dec_mb(&port->sep_tg_pt_ref_cnt);
}
spin_unlock(&dev->se_port_lock);
spin_lock(&pr_tmpl->aptpl_reg_lock);
list_for_each_entry_safe(pr_reg, pr_reg_tmp, &pr_tmpl->aptpl_reg_list,
pr_reg_aptpl_list) {
+
if (!strcmp(pr_reg->pr_iport, i_port) &&
(pr_reg->pr_res_mapped_lun == deve->mapped_lun) &&
!(strcmp(pr_reg->pr_tport, t_port)) &&
struct se_device *dev,
struct se_portal_group *tpg,
struct se_lun *lun,
- struct se_lun_acl *lun_acl)
+ struct se_node_acl *nacl,
+ u32 mapped_lun)
{
- struct se_node_acl *nacl = lun_acl->se_lun_nacl;
- struct se_dev_entry *deve = nacl->device_list[lun_acl->mapped_lun];
+ struct se_dev_entry *deve = nacl->device_list[mapped_lun];
if (dev->dev_reservation_flags & DRF_SPC2_RESERVATIONS)
return 0;
if (dev->dev_attrib.enforce_pr_isids)
continue;
}
- atomic_inc(&pr_reg->pr_res_holders);
- smp_mb__after_atomic();
+ atomic_inc_mb(&pr_reg->pr_res_holders);
spin_unlock(&pr_tmpl->registration_lock);
return pr_reg;
}
if (strcmp(isid, pr_reg->pr_reg_isid))
continue;
- atomic_inc(&pr_reg->pr_res_holders);
- smp_mb__after_atomic();
+ atomic_inc_mb(&pr_reg->pr_res_holders);
spin_unlock(&pr_tmpl->registration_lock);
return pr_reg;
}
static void core_scsi3_put_pr_reg(struct t10_pr_registration *pr_reg)
{
- atomic_dec(&pr_reg->pr_res_holders);
- smp_mb__after_atomic();
+ atomic_dec_mb(&pr_reg->pr_res_holders);
}
static int core_scsi3_check_implicit_release(
configfs_undepend_item(tpg->se_tpg_tfo->tf_subsys,
&tpg->tpg_group.cg_item);
- atomic_dec(&tpg->tpg_pr_ref_count);
- smp_mb__after_atomic();
+ atomic_dec_mb(&tpg->tpg_pr_ref_count);
}
static int core_scsi3_nodeacl_depend_item(struct se_node_acl *nacl)
struct se_portal_group *tpg = nacl->se_tpg;
if (nacl->dynamic_node_acl) {
- atomic_dec(&nacl->acl_pr_ref_count);
- smp_mb__after_atomic();
+ atomic_dec_mb(&nacl->acl_pr_ref_count);
return;
}
configfs_undepend_item(tpg->se_tpg_tfo->tf_subsys,
&nacl->acl_group.cg_item);
- atomic_dec(&nacl->acl_pr_ref_count);
- smp_mb__after_atomic();
+ atomic_dec_mb(&nacl->acl_pr_ref_count);
}
static int core_scsi3_lunacl_depend_item(struct se_dev_entry *se_deve)
* For nacl->dynamic_node_acl=1
*/
if (!lun_acl) {
- atomic_dec(&se_deve->pr_ref_count);
- smp_mb__after_atomic();
+ atomic_dec_mb(&se_deve->pr_ref_count);
return;
}
nacl = lun_acl->se_lun_nacl;
configfs_undepend_item(tpg->se_tpg_tfo->tf_subsys,
&lun_acl->se_lun_group.cg_item);
- atomic_dec(&se_deve->pr_ref_count);
- smp_mb__after_atomic();
+ atomic_dec_mb(&se_deve->pr_ref_count);
}
static sense_reason_t
if (!i_str)
continue;
- atomic_inc(&tmp_tpg->tpg_pr_ref_count);
- smp_mb__after_atomic();
+ atomic_inc_mb(&tmp_tpg->tpg_pr_ref_count);
spin_unlock(&dev->se_port_lock);
if (core_scsi3_tpg_depend_item(tmp_tpg)) {
pr_err(" core_scsi3_tpg_depend_item()"
" for tmp_tpg\n");
- atomic_dec(&tmp_tpg->tpg_pr_ref_count);
- smp_mb__after_atomic();
+ atomic_dec_mb(&tmp_tpg->tpg_pr_ref_count);
ret = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
goto out_unmap;
}
spin_lock_irq(&tmp_tpg->acl_node_lock);
dest_node_acl = __core_tpg_get_initiator_node_acl(
tmp_tpg, i_str);
- if (dest_node_acl) {
- atomic_inc(&dest_node_acl->acl_pr_ref_count);
- smp_mb__after_atomic();
- }
+ if (dest_node_acl)
+ atomic_inc_mb(&dest_node_acl->acl_pr_ref_count);
spin_unlock_irq(&tmp_tpg->acl_node_lock);
if (!dest_node_acl) {
if (core_scsi3_nodeacl_depend_item(dest_node_acl)) {
pr_err("configfs_depend_item() failed"
" for dest_node_acl->acl_group\n");
- atomic_dec(&dest_node_acl->acl_pr_ref_count);
- smp_mb__after_atomic();
+ atomic_dec_mb(&dest_node_acl->acl_pr_ref_count);
core_scsi3_tpg_undepend_item(tmp_tpg);
ret = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
goto out_unmap;
if (core_scsi3_lunacl_depend_item(dest_se_deve)) {
pr_err("core_scsi3_lunacl_depend_item()"
" failed\n");
- atomic_dec(&dest_se_deve->pr_ref_count);
- smp_mb__after_atomic();
+ atomic_dec_mb(&dest_se_deve->pr_ref_count);
core_scsi3_nodeacl_undepend_item(dest_node_acl);
core_scsi3_tpg_undepend_item(dest_tpg);
ret = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
struct t10_pr_registration *pr_reg, *pr_reg_tmp, *pr_reg_n, *pr_res_holder;
struct t10_reservation *pr_tmpl = &dev->t10_pr;
u32 pr_res_mapped_lun = 0;
- int all_reg = 0, calling_it_nexus = 0, released_regs = 0;
+ int all_reg = 0, calling_it_nexus = 0;
+ bool sa_res_key_unmatched = sa_res_key != 0;
int prh_type = 0, prh_scope = 0;
if (!se_sess)
if (!all_reg) {
if (pr_reg->pr_res_key != sa_res_key)
continue;
+ sa_res_key_unmatched = false;
calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0;
pr_reg_nacl = pr_reg->pr_reg_nacl;
__core_scsi3_free_registration(dev, pr_reg,
(preempt_type == PREEMPT_AND_ABORT) ? &preempt_and_abort_list :
NULL, calling_it_nexus);
- released_regs++;
} else {
/*
* Case for any existing all registrants type
if ((sa_res_key) &&
(pr_reg->pr_res_key != sa_res_key))
continue;
+ sa_res_key_unmatched = false;
calling_it_nexus = (pr_reg_n == pr_reg) ? 1 : 0;
if (calling_it_nexus)
__core_scsi3_free_registration(dev, pr_reg,
(preempt_type == PREEMPT_AND_ABORT) ? &preempt_and_abort_list :
NULL, 0);
- released_regs++;
}
if (!calling_it_nexus)
core_scsi3_ua_allocate(pr_reg_nacl,
* registered reservation key, then the device server shall
* complete the command with RESERVATION CONFLICT status.
*/
- if (!released_regs) {
+ if (sa_res_key_unmatched) {
spin_unlock(&dev->dev_reservation_lock);
core_scsi3_put_pr_reg(pr_reg_n);
return TCM_RESERVATION_CONFLICT;
if (!dest_tf_ops)
continue;
- atomic_inc(&dest_se_tpg->tpg_pr_ref_count);
- smp_mb__after_atomic();
+ atomic_inc_mb(&dest_se_tpg->tpg_pr_ref_count);
spin_unlock(&dev->se_port_lock);
if (core_scsi3_tpg_depend_item(dest_se_tpg)) {
pr_err("core_scsi3_tpg_depend_item() failed"
" for dest_se_tpg\n");
- atomic_dec(&dest_se_tpg->tpg_pr_ref_count);
- smp_mb__after_atomic();
+ atomic_dec_mb(&dest_se_tpg->tpg_pr_ref_count);
ret = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
goto out_put_pr_reg;
}
spin_lock_irq(&dest_se_tpg->acl_node_lock);
dest_node_acl = __core_tpg_get_initiator_node_acl(dest_se_tpg,
initiator_str);
- if (dest_node_acl) {
- atomic_inc(&dest_node_acl->acl_pr_ref_count);
- smp_mb__after_atomic();
- }
+ if (dest_node_acl)
+ atomic_inc_mb(&dest_node_acl->acl_pr_ref_count);
spin_unlock_irq(&dest_se_tpg->acl_node_lock);
if (!dest_node_acl) {
if (core_scsi3_nodeacl_depend_item(dest_node_acl)) {
pr_err("core_scsi3_nodeacl_depend_item() for"
" dest_node_acl\n");
- atomic_dec(&dest_node_acl->acl_pr_ref_count);
- smp_mb__after_atomic();
+ atomic_dec_mb(&dest_node_acl->acl_pr_ref_count);
dest_node_acl = NULL;
ret = TCM_INVALID_PARAMETER_LIST;
goto out;
if (core_scsi3_lunacl_depend_item(dest_se_deve)) {
pr_err("core_scsi3_lunacl_depend_item() failed\n");
- atomic_dec(&dest_se_deve->pr_ref_count);
- smp_mb__after_atomic();
+ atomic_dec_mb(&dest_se_deve->pr_ref_count);
dest_se_deve = NULL;
ret = TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
goto out;
sense_reason_t
target_scsi3_emulate_pr_out(struct se_cmd *cmd)
{
+ struct se_device *dev = cmd->se_dev;
unsigned char *cdb = &cmd->t_task_cdb[0];
unsigned char *buf;
u64 res_key, sa_res_key;
aptpl = (buf[17] & 0x01);
unreg = (buf[17] & 0x02);
}
+ /*
+ * If the backend device has been configured to force APTPL metadata
+ * write-out, go ahead and propigate aptpl=1 down now.
+ */
+ if (dev->dev_attrib.force_pr_aptpl)
+ aptpl = 1;
+
transport_kunmap_data_sg(cmd);
buf = NULL;
if (!buf)
return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
- buf[0] = ((add_len << 8) & 0xff);
+ buf[0] = ((add_len >> 8) & 0xff);
buf[1] = (add_len & 0xff);
buf[2] |= 0x10; /* CRH: Compatible Reservation Hanlding bit. */
buf[2] |= 0x08; /* SIP_C: Specify Initiator Ports Capable bit */
se_tpg = pr_reg->pr_reg_nacl->se_tpg;
add_desc_len = 0;
- atomic_inc(&pr_reg->pr_res_holders);
- smp_mb__after_atomic();
+ atomic_inc_mb(&pr_reg->pr_res_holders);
spin_unlock(&pr_tmpl->registration_lock);
/*
* Determine expected length of $FABRIC_MOD specific
pr_warn("SPC-3 PRIN READ_FULL_STATUS ran"
" out of buffer: %d\n", cmd->data_length);
spin_lock(&pr_tmpl->registration_lock);
- atomic_dec(&pr_reg->pr_res_holders);
- smp_mb__after_atomic();
+ atomic_dec_mb(&pr_reg->pr_res_holders);
break;
}
/*
se_nacl, pr_reg, &format_code, &buf[off+4]);
spin_lock(&pr_tmpl->registration_lock);
- atomic_dec(&pr_reg->pr_res_holders);
- smp_mb__after_atomic();
+ atomic_dec_mb(&pr_reg->pr_res_holders);
/*
* Set the ADDITIONAL DESCRIPTOR LENGTH
*/
unsigned char *, u16, u32, int, int, u8);
extern int core_scsi3_check_aptpl_registration(struct se_device *,
struct se_portal_group *, struct se_lun *,
- struct se_lun_acl *);
+ struct se_node_acl *, u32);
extern void core_scsi3_free_pr_reg_from_nacl(struct se_device *,
struct se_node_acl *);
extern void core_scsi3_free_all_registrations(struct se_device *);
ret = -EINVAL;
goto out;
}
- match_int(args, &arg);
+ ret = match_int(args, &arg);
+ if (ret)
+ goto out;
pdv->pdv_host_id = arg;
pr_debug("PSCSI[%d]: Referencing SCSI Host ID:"
" %d\n", phv->phv_host_id, pdv->pdv_host_id);
pdv->pdv_flags |= PDF_HAS_VIRT_HOST_ID;
break;
case Opt_scsi_channel_id:
- match_int(args, &arg);
+ ret = match_int(args, &arg);
+ if (ret)
+ goto out;
pdv->pdv_channel_id = arg;
pr_debug("PSCSI[%d]: Referencing SCSI Channel"
" ID: %d\n", phv->phv_host_id,
pdv->pdv_flags |= PDF_HAS_CHANNEL_ID;
break;
case Opt_scsi_target_id:
- match_int(args, &arg);
+ ret = match_int(args, &arg);
+ if (ret)
+ goto out;
pdv->pdv_target_id = arg;
pr_debug("PSCSI[%d]: Referencing SCSI Target"
" ID: %d\n", phv->phv_host_id,
pdv->pdv_flags |= PDF_HAS_TARGET_ID;
break;
case Opt_scsi_lun_id:
- match_int(args, &arg);
+ ret = match_int(args, &arg);
+ if (ret)
+ goto out;
pdv->pdv_lun_id = arg;
pr_debug("PSCSI[%d]: Referencing SCSI LUN ID:"
" %d\n", phv->phv_host_id, pdv->pdv_lun_id);
size = READ_CAP_LEN;
cmd->execute_cmd = sbc_emulate_readcapacity;
break;
- case SERVICE_ACTION_IN:
+ case SERVICE_ACTION_IN_16:
switch (cmd->t_task_cdb[1] & 0x1f) {
case SAI_READ_CAPACITY_16:
cmd->execute_cmd = sbc_emulate_readcapacity_16;
}
/* reject any command that we don't have a handler for */
- if (!(cmd->se_cmd_flags & SCF_SCSI_DATA_CDB) && !cmd->execute_cmd)
+ if (!cmd->execute_cmd)
return TCM_UNSUPPORTED_SCSI_OPCODE;
if (cmd->se_cmd_flags & SCF_SCSI_DATA_CDB) {
}
EXPORT_SYMBOL(core_tmr_alloc_req);
-void core_tmr_release_req(
- struct se_tmr_req *tmr)
+void core_tmr_release_req(struct se_tmr_req *tmr)
{
struct se_device *dev = tmr->tmr_dev;
unsigned long flags;
- if (!dev) {
- kfree(tmr);
- return;
+ if (dev) {
+ spin_lock_irqsave(&dev->se_tmr_lock, flags);
+ list_del(&tmr->tmr_list);
+ spin_unlock_irqrestore(&dev->se_tmr_lock, flags);
}
- spin_lock_irqsave(&dev->se_tmr_lock, flags);
- list_del(&tmr->tmr_list);
- spin_unlock_irqrestore(&dev->se_tmr_lock, flags);
-
kfree(tmr);
}
bool remove = true;
/*
* TASK ABORTED status (TAS) bit support
- */
- if ((tmr_nacl &&
- (tmr_nacl != cmd->se_sess->se_node_acl)) && tas) {
+ */
+ if ((tmr_nacl && (tmr_nacl != cmd->se_sess->se_node_acl)) && tas) {
remove = false;
transport_send_task_abort(cmd);
}
struct se_tmr_req *tmr,
struct se_session *se_sess)
{
- struct se_cmd *se_cmd, *tmp_cmd;
+ struct se_cmd *se_cmd;
unsigned long flags;
int ref_tag;
spin_lock_irqsave(&se_sess->sess_cmd_lock, flags);
- list_for_each_entry_safe(se_cmd, tmp_cmd,
- &se_sess->sess_cmd_list, se_cmd_list) {
+ list_for_each_entry(se_cmd, &se_sess->sess_cmd_list, se_cmd_list) {
if (dev != se_cmd->se_dev)
continue;
#include <target/target_core_fabric.h>
#include "target_core_internal.h"
+#include "target_core_pr.h"
extern struct se_device *g_lun0_dev;
core_enable_device_list_for_node(lun, NULL, lun->unpacked_lun,
lun_access, acl, tpg);
+ /*
+ * Check to see if there are any existing persistent reservation
+ * APTPL pre-registrations that need to be enabled for this dynamic
+ * LUN ACL now..
+ */
+ core_scsi3_check_aptpl_registration(dev, tpg, lun, acl,
+ lun->unpacked_lun);
spin_lock(&tpg->tpg_lun_lock);
}
spin_unlock(&tpg->tpg_lun_lock);
continue;
spin_unlock(&tpg->tpg_lun_lock);
- core_dev_del_lun(tpg, lun->unpacked_lun);
+ core_dev_del_lun(tpg, lun);
spin_lock(&tpg->tpg_lun_lock);
}
spin_unlock(&tpg->tpg_lun_lock);
return 0;
}
-static void core_tpg_release_virtual_lun0(struct se_portal_group *se_tpg)
-{
- struct se_lun *lun = &se_tpg->tpg_virt_lun0;
-
- core_tpg_post_dellun(se_tpg, lun);
-}
-
int core_tpg_register(
struct target_core_fabric_ops *tfo,
struct se_wwn *se_wwn,
spin_unlock_irq(&se_tpg->acl_node_lock);
if (se_tpg->se_tpg_type == TRANSPORT_TPG_TYPE_NORMAL)
- core_tpg_release_virtual_lun0(se_tpg);
+ core_tpg_remove_lun(se_tpg, &se_tpg->tpg_virt_lun0);
se_tpg->se_tpg_fabric_ptr = NULL;
array_free(se_tpg->tpg_lun_list, TRANSPORT_MAX_LUNS_PER_TPG);
return 0;
}
-struct se_lun *core_tpg_pre_dellun(
- struct se_portal_group *tpg,
- u32 unpacked_lun)
-{
- struct se_lun *lun;
-
- if (unpacked_lun > (TRANSPORT_MAX_LUNS_PER_TPG-1)) {
- pr_err("%s LUN: %u exceeds TRANSPORT_MAX_LUNS_PER_TPG"
- "-1: %u for Target Portal Group: %u\n",
- tpg->se_tpg_tfo->get_fabric_name(), unpacked_lun,
- TRANSPORT_MAX_LUNS_PER_TPG-1,
- tpg->se_tpg_tfo->tpg_get_tag(tpg));
- return ERR_PTR(-EOVERFLOW);
- }
-
- spin_lock(&tpg->tpg_lun_lock);
- lun = tpg->tpg_lun_list[unpacked_lun];
- if (lun->lun_status != TRANSPORT_LUN_STATUS_ACTIVE) {
- pr_err("%s Logical Unit Number: %u is not active on"
- " Target Portal Group: %u, ignoring request.\n",
- tpg->se_tpg_tfo->get_fabric_name(), unpacked_lun,
- tpg->se_tpg_tfo->tpg_get_tag(tpg));
- spin_unlock(&tpg->tpg_lun_lock);
- return ERR_PTR(-ENODEV);
- }
- spin_unlock(&tpg->tpg_lun_lock);
-
- return lun;
-}
-
-int core_tpg_post_dellun(
+void core_tpg_remove_lun(
struct se_portal_group *tpg,
struct se_lun *lun)
{
spin_unlock(&tpg->tpg_lun_lock);
percpu_ref_exit(&lun->lun_ref);
-
- return 0;
}
if (ret != 0)
pr_err("Unable to load target_core_pscsi\n");
+ ret = request_module("target_core_user");
+ if (ret != 0)
+ pr_err("Unable to load target_core_user\n");
+
sub_api_initialized = 1;
}
list_for_each_entry_safe(cmd, cmd_tmp, &qf_cmd_list, se_qf_node) {
list_del(&cmd->se_qf_node);
- atomic_dec(&dev->dev_qf_count);
- smp_mb__after_atomic();
+ atomic_dec_mb(&dev->dev_qf_count);
pr_debug("Processing %s cmd: %p QUEUE_FULL in work queue"
" context: %s\n", cmd->se_tfo->get_fabric_name(), cmd,
* Dormant to Active status.
*/
cmd->se_ordered_id = atomic_inc_return(&dev->dev_ordered_id);
- smp_mb__after_atomic();
pr_debug("Allocated se_ordered_id: %u for Task Attr: 0x%02x on %s\n",
cmd->se_ordered_id, cmd->sam_task_attr,
dev->transport->name);
cmd->t_task_cdb[0], cmd->se_ordered_id);
return false;
case MSG_ORDERED_TAG:
- atomic_inc(&dev->dev_ordered_sync);
- smp_mb__after_atomic();
+ atomic_inc_mb(&dev->dev_ordered_sync);
pr_debug("Added ORDERED for CDB: 0x%02x to ordered list, "
" se_ordered_id: %u\n",
/*
* For SIMPLE and UNTAGGED Task Attribute commands
*/
- atomic_inc(&dev->simple_cmds);
- smp_mb__after_atomic();
+ atomic_inc_mb(&dev->simple_cmds);
break;
}
return;
if (cmd->sam_task_attr == MSG_SIMPLE_TAG) {
- atomic_dec(&dev->simple_cmds);
- smp_mb__after_atomic();
+ atomic_dec_mb(&dev->simple_cmds);
dev->dev_cur_ordered_id++;
pr_debug("Incremented dev->dev_cur_ordered_id: %u for"
" SIMPLE: %u\n", dev->dev_cur_ordered_id,
" HEAD_OF_QUEUE: %u\n", dev->dev_cur_ordered_id,
cmd->se_ordered_id);
} else if (cmd->sam_task_attr == MSG_ORDERED_TAG) {
- atomic_dec(&dev->dev_ordered_sync);
- smp_mb__after_atomic();
+ atomic_dec_mb(&dev->dev_ordered_sync);
dev->dev_cur_ordered_id++;
pr_debug("Incremented dev_cur_ordered_id: %u for ORDERED:"
if (cmd->se_cmd_flags & SCF_TRANSPORT_TASK_SENSE) {
trace_target_cmd_complete(cmd);
ret = cmd->se_tfo->queue_status(cmd);
- if (ret)
- goto out;
+ goto out;
}
switch (cmd->data_direction) {
{
spin_lock_irq(&dev->qf_cmd_lock);
list_add_tail(&cmd->se_qf_node, &cmd->se_dev->qf_cmd_list);
- atomic_inc(&dev->dev_qf_count);
- smp_mb__after_atomic();
+ atomic_inc_mb(&dev->dev_qf_count);
spin_unlock_irq(&cmd->se_dev->qf_cmd_lock);
schedule_work(&cmd->se_dev->qf_work_queue);
* and let it call back once the write buffers are ready.
*/
target_add_to_state_list(cmd);
- if (cmd->data_direction != DMA_TO_DEVICE) {
+ if (cmd->data_direction != DMA_TO_DEVICE || cmd->data_length == 0) {
target_execute_cmd(cmd);
return 0;
}
if (cmd->se_tfo->write_pending_status(cmd) != 0) {
cmd->transport_state |= CMD_T_ABORTED;
cmd->se_cmd_flags |= SCF_SEND_DELAYED_TAS;
- smp_mb__after_atomic();
return;
}
}
spin_unlock(&deve->ua_lock);
spin_unlock_irq(&nacl->device_list_lock);
- atomic_inc(&deve->ua_count);
- smp_mb__after_atomic();
+ atomic_inc_mb(&deve->ua_count);
return 0;
}
list_add_tail(&ua->ua_nacl_list, &deve->ua_list);
nacl->se_tpg->se_tpg_tfo->get_fabric_name(), unpacked_lun,
asc, ascq);
- atomic_inc(&deve->ua_count);
- smp_mb__after_atomic();
+ atomic_inc_mb(&deve->ua_count);
return 0;
}
list_del(&ua->ua_nacl_list);
kmem_cache_free(se_ua_cache, ua);
- atomic_dec(&deve->ua_count);
- smp_mb__after_atomic();
+ atomic_dec_mb(&deve->ua_count);
}
spin_unlock(&deve->ua_lock);
}
list_del(&ua->ua_nacl_list);
kmem_cache_free(se_ua_cache, ua);
- atomic_dec(&deve->ua_count);
- smp_mb__after_atomic();
+ atomic_dec_mb(&deve->ua_count);
}
spin_unlock(&deve->ua_lock);
spin_unlock_irq(&nacl->device_list_lock);
list_del(&ua->ua_nacl_list);
kmem_cache_free(se_ua_cache, ua);
- atomic_dec(&deve->ua_count);
- smp_mb__after_atomic();
+ atomic_dec_mb(&deve->ua_count);
}
spin_unlock(&deve->ua_lock);
spin_unlock_irq(&nacl->device_list_lock);
#ifndef TARGET_CORE_UA_H
+#define TARGET_CORE_UA_H
/*
* From spc4r17, Table D.1: ASC and ASCQ Assignement
--- /dev/null
+/*
+ * Copyright (C) 2013 Shaohua Li <shli@kernel.org>
+ * Copyright (C) 2014 Red Hat, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/spinlock.h>
+#include <linux/module.h>
+#include <linux/idr.h>
+#include <linux/timer.h>
+#include <linux/parser.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <linux/uio_driver.h>
+#include <net/genetlink.h>
+#include <target/target_core_base.h>
+#include <target/target_core_fabric.h>
+#include <target/target_core_backend.h>
+#include <linux/target_core_user.h>
+
+/*
+ * Define a shared-memory interface for LIO to pass SCSI commands and
+ * data to userspace for processing. This is to allow backends that
+ * are too complex for in-kernel support to be possible.
+ *
+ * It uses the UIO framework to do a lot of the device-creation and
+ * introspection work for us.
+ *
+ * See the .h file for how the ring is laid out. Note that while the
+ * command ring is defined, the particulars of the data area are
+ * not. Offset values in the command entry point to other locations
+ * internal to the mmap()ed area. There is separate space outside the
+ * command ring for data buffers. This leaves maximum flexibility for
+ * moving buffer allocations, or even page flipping or other
+ * allocation techniques, without altering the command ring layout.
+ *
+ * SECURITY:
+ * The user process must be assumed to be malicious. There's no way to
+ * prevent it breaking the command ring protocol if it wants, but in
+ * order to prevent other issues we must only ever read *data* from
+ * the shared memory area, not offsets or sizes. This applies to
+ * command ring entries as well as the mailbox. Extra code needed for
+ * this may have a 'UAM' comment.
+ */
+
+
+#define TCMU_TIME_OUT (30 * MSEC_PER_SEC)
+
+#define CMDR_SIZE (16 * 4096)
+#define DATA_SIZE (257 * 4096)
+
+#define TCMU_RING_SIZE (CMDR_SIZE + DATA_SIZE)
+
+static struct device *tcmu_root_device;
+
+struct tcmu_hba {
+ u32 host_id;
+};
+
+/* User wants all cmds or just some */
+enum passthru_level {
+ TCMU_PASS_ALL = 0,
+ TCMU_PASS_IO,
+ TCMU_PASS_INVALID,
+};
+
+#define TCMU_CONFIG_LEN 256
+
+struct tcmu_dev {
+ struct se_device se_dev;
+
+ char *name;
+ struct se_hba *hba;
+
+#define TCMU_DEV_BIT_OPEN 0
+#define TCMU_DEV_BIT_BROKEN 1
+ unsigned long flags;
+ enum passthru_level pass_level;
+
+ struct uio_info uio_info;
+
+ struct tcmu_mailbox *mb_addr;
+ size_t dev_size;
+ u32 cmdr_size;
+ u32 cmdr_last_cleaned;
+ /* Offset of data ring from start of mb */
+ size_t data_off;
+ size_t data_size;
+ /* Ring head + tail values. */
+ /* Must add data_off and mb_addr to get the address */
+ size_t data_head;
+ size_t data_tail;
+
+ wait_queue_head_t wait_cmdr;
+ /* TODO should this be a mutex? */
+ spinlock_t cmdr_lock;
+
+ struct idr commands;
+ spinlock_t commands_lock;
+
+ struct timer_list timeout;
+
+ char dev_config[TCMU_CONFIG_LEN];
+};
+
+#define TCMU_DEV(_se_dev) container_of(_se_dev, struct tcmu_dev, se_dev)
+
+#define CMDR_OFF sizeof(struct tcmu_mailbox)
+
+struct tcmu_cmd {
+ struct se_cmd *se_cmd;
+ struct tcmu_dev *tcmu_dev;
+
+ uint16_t cmd_id;
+
+ /* Can't use se_cmd->data_length when cleaning up expired cmds, because if
+ cmd has been completed then accessing se_cmd is off limits */
+ size_t data_length;
+
+ unsigned long deadline;
+
+#define TCMU_CMD_BIT_EXPIRED 0
+ unsigned long flags;
+};
+
+static struct kmem_cache *tcmu_cmd_cache;
+
+/* multicast group */
+enum tcmu_multicast_groups {
+ TCMU_MCGRP_CONFIG,
+};
+
+static const struct genl_multicast_group tcmu_mcgrps[] = {
+ [TCMU_MCGRP_CONFIG] = { .name = "config", },
+};
+
+/* Our generic netlink family */
+static struct genl_family tcmu_genl_family = {
+ .id = GENL_ID_GENERATE,
+ .hdrsize = 0,
+ .name = "TCM-USER",
+ .version = 1,
+ .maxattr = TCMU_ATTR_MAX,
+ .mcgrps = tcmu_mcgrps,
+ .n_mcgrps = ARRAY_SIZE(tcmu_mcgrps),
+};
+
+static struct tcmu_cmd *tcmu_alloc_cmd(struct se_cmd *se_cmd)
+{
+ struct se_device *se_dev = se_cmd->se_dev;
+ struct tcmu_dev *udev = TCMU_DEV(se_dev);
+ struct tcmu_cmd *tcmu_cmd;
+ int cmd_id;
+
+ tcmu_cmd = kmem_cache_zalloc(tcmu_cmd_cache, GFP_KERNEL);
+ if (!tcmu_cmd)
+ return NULL;
+
+ tcmu_cmd->se_cmd = se_cmd;
+ tcmu_cmd->tcmu_dev = udev;
+ tcmu_cmd->data_length = se_cmd->data_length;
+
+ tcmu_cmd->deadline = jiffies + msecs_to_jiffies(TCMU_TIME_OUT);
+
+ idr_preload(GFP_KERNEL);
+ spin_lock_irq(&udev->commands_lock);
+ cmd_id = idr_alloc(&udev->commands, tcmu_cmd, 0,
+ USHRT_MAX, GFP_NOWAIT);
+ spin_unlock_irq(&udev->commands_lock);
+ idr_preload_end();
+
+ if (cmd_id < 0) {
+ kmem_cache_free(tcmu_cmd_cache, tcmu_cmd);
+ return NULL;
+ }
+ tcmu_cmd->cmd_id = cmd_id;
+
+ return tcmu_cmd;
+}
+
+static inline void tcmu_flush_dcache_range(void *vaddr, size_t size)
+{
+ unsigned long offset = (unsigned long) vaddr & ~PAGE_MASK;
+
+ size = round_up(size+offset, PAGE_SIZE);
+ vaddr -= offset;
+
+ while (size) {
+ flush_dcache_page(virt_to_page(vaddr));
+ size -= PAGE_SIZE;
+ }
+}
+
+/*
+ * Some ring helper functions. We don't assume size is a power of 2 so
+ * we can't use circ_buf.h.
+ */
+static inline size_t spc_used(size_t head, size_t tail, size_t size)
+{
+ int diff = head - tail;
+
+ if (diff >= 0)
+ return diff;
+ else
+ return size + diff;
+}
+
+static inline size_t spc_free(size_t head, size_t tail, size_t size)
+{
+ /* Keep 1 byte unused or we can't tell full from empty */
+ return (size - spc_used(head, tail, size) - 1);
+}
+
+static inline size_t head_to_end(size_t head, size_t size)
+{
+ return size - head;
+}
+
+#define UPDATE_HEAD(head, used, size) smp_store_release(&head, ((head % size) + used) % size)
+
+/*
+ * We can't queue a command until we have space available on the cmd ring *and* space
+ * space avail on the data ring.
+ *
+ * Called with ring lock held.
+ */
+static bool is_ring_space_avail(struct tcmu_dev *udev, size_t cmd_size, size_t data_needed)
+{
+ struct tcmu_mailbox *mb = udev->mb_addr;
+ size_t space;
+ u32 cmd_head;
+ size_t cmd_needed;
+
+ tcmu_flush_dcache_range(mb, sizeof(*mb));
+
+ cmd_head = mb->cmd_head % udev->cmdr_size; /* UAM */
+
+ /*
+ * If cmd end-of-ring space is too small then we need space for a NOP plus
+ * original cmd - cmds are internally contiguous.
+ */
+ if (head_to_end(cmd_head, udev->cmdr_size) >= cmd_size)
+ cmd_needed = cmd_size;
+ else
+ cmd_needed = cmd_size + head_to_end(cmd_head, udev->cmdr_size);
+
+ space = spc_free(cmd_head, udev->cmdr_last_cleaned, udev->cmdr_size);
+ if (space < cmd_needed) {
+ pr_debug("no cmd space: %u %u %u\n", cmd_head,
+ udev->cmdr_last_cleaned, udev->cmdr_size);
+ return false;
+ }
+
+ space = spc_free(udev->data_head, udev->data_tail, udev->data_size);
+ if (space < data_needed) {
+ pr_debug("no data space: %zu %zu %zu\n", udev->data_head,
+ udev->data_tail, udev->data_size);
+ return false;
+ }
+
+ return true;
+}
+
+static int tcmu_queue_cmd_ring(struct tcmu_cmd *tcmu_cmd)
+{
+ struct tcmu_dev *udev = tcmu_cmd->tcmu_dev;
+ struct se_cmd *se_cmd = tcmu_cmd->se_cmd;
+ size_t base_command_size, command_size;
+ struct tcmu_mailbox *mb;
+ struct tcmu_cmd_entry *entry;
+ int i;
+ struct scatterlist *sg;
+ struct iovec *iov;
+ int iov_cnt = 0;
+ uint32_t cmd_head;
+ uint64_t cdb_off;
+
+ if (test_bit(TCMU_DEV_BIT_BROKEN, &udev->flags))
+ return -EINVAL;
+
+ /*
+ * Must be a certain minimum size for response sense info, but
+ * also may be larger if the iov array is large.
+ *
+ * iovs = sgl_nents+1, for end-of-ring case, plus another 1
+ * b/c size == offsetof one-past-element.
+ */
+ base_command_size = max(offsetof(struct tcmu_cmd_entry,
+ req.iov[se_cmd->t_data_nents + 2]),
+ sizeof(struct tcmu_cmd_entry));
+ command_size = base_command_size
+ + round_up(scsi_command_size(se_cmd->t_task_cdb), TCMU_OP_ALIGN_SIZE);
+
+ WARN_ON(command_size & (TCMU_OP_ALIGN_SIZE-1));
+
+ spin_lock_irq(&udev->cmdr_lock);
+
+ mb = udev->mb_addr;
+ cmd_head = mb->cmd_head % udev->cmdr_size; /* UAM */
+ if ((command_size > (udev->cmdr_size / 2))
+ || tcmu_cmd->data_length > (udev->data_size - 1))
+ pr_warn("TCMU: Request of size %zu/%zu may be too big for %u/%zu "
+ "cmd/data ring buffers\n", command_size, tcmu_cmd->data_length,
+ udev->cmdr_size, udev->data_size);
+
+ while (!is_ring_space_avail(udev, command_size, tcmu_cmd->data_length)) {
+ int ret;
+ DEFINE_WAIT(__wait);
+
+ prepare_to_wait(&udev->wait_cmdr, &__wait, TASK_INTERRUPTIBLE);
+
+ pr_debug("sleeping for ring space\n");
+ spin_unlock_irq(&udev->cmdr_lock);
+ ret = schedule_timeout(msecs_to_jiffies(TCMU_TIME_OUT));
+ finish_wait(&udev->wait_cmdr, &__wait);
+ if (!ret) {
+ pr_warn("tcmu: command timed out\n");
+ return -ETIMEDOUT;
+ }
+
+ spin_lock_irq(&udev->cmdr_lock);
+
+ /* We dropped cmdr_lock, cmd_head is stale */
+ cmd_head = mb->cmd_head % udev->cmdr_size; /* UAM */
+ }
+
+ /* Insert a PAD if end-of-ring space is too small */
+ if (head_to_end(cmd_head, udev->cmdr_size) < command_size) {
+ size_t pad_size = head_to_end(cmd_head, udev->cmdr_size);
+
+ entry = (void *) mb + CMDR_OFF + cmd_head;
+ tcmu_flush_dcache_range(entry, sizeof(*entry));
+ tcmu_hdr_set_op(&entry->hdr, TCMU_OP_PAD);
+ tcmu_hdr_set_len(&entry->hdr, pad_size);
+
+ UPDATE_HEAD(mb->cmd_head, pad_size, udev->cmdr_size);
+
+ cmd_head = mb->cmd_head % udev->cmdr_size; /* UAM */
+ WARN_ON(cmd_head != 0);
+ }
+
+ entry = (void *) mb + CMDR_OFF + cmd_head;
+ tcmu_flush_dcache_range(entry, sizeof(*entry));
+ tcmu_hdr_set_op(&entry->hdr, TCMU_OP_CMD);
+ tcmu_hdr_set_len(&entry->hdr, command_size);
+ entry->cmd_id = tcmu_cmd->cmd_id;
+
+ /*
+ * Fix up iovecs, and handle if allocation in data ring wrapped.
+ */
+ iov = &entry->req.iov[0];
+ for_each_sg(se_cmd->t_data_sg, sg, se_cmd->t_data_nents, i) {
+ size_t copy_bytes = min((size_t)sg->length,
+ head_to_end(udev->data_head, udev->data_size));
+ void *from = kmap_atomic(sg_page(sg)) + sg->offset;
+ void *to = (void *) mb + udev->data_off + udev->data_head;
+
+ if (tcmu_cmd->se_cmd->data_direction == DMA_TO_DEVICE) {
+ memcpy(to, from, copy_bytes);
+ tcmu_flush_dcache_range(to, copy_bytes);
+ }
+
+ /* Even iov_base is relative to mb_addr */
+ iov->iov_len = copy_bytes;
+ iov->iov_base = (void *) udev->data_off + udev->data_head;
+ iov_cnt++;
+ iov++;
+
+ UPDATE_HEAD(udev->data_head, copy_bytes, udev->data_size);
+
+ /* Uh oh, we wrapped the buffer. Must split sg across 2 iovs. */
+ if (sg->length != copy_bytes) {
+ from += copy_bytes;
+ copy_bytes = sg->length - copy_bytes;
+
+ iov->iov_len = copy_bytes;
+ iov->iov_base = (void *) udev->data_off + udev->data_head;
+
+ if (se_cmd->data_direction == DMA_TO_DEVICE) {
+ to = (void *) mb + udev->data_off + udev->data_head;
+ memcpy(to, from, copy_bytes);
+ tcmu_flush_dcache_range(to, copy_bytes);
+ }
+
+ iov_cnt++;
+ iov++;
+
+ UPDATE_HEAD(udev->data_head, copy_bytes, udev->data_size);
+ }
+
+ kunmap_atomic(from);
+ }
+ entry->req.iov_cnt = iov_cnt;
+
+ /* All offsets relative to mb_addr, not start of entry! */
+ cdb_off = CMDR_OFF + cmd_head + base_command_size;
+ memcpy((void *) mb + cdb_off, se_cmd->t_task_cdb, scsi_command_size(se_cmd->t_task_cdb));
+ entry->req.cdb_off = cdb_off;
+ tcmu_flush_dcache_range(entry, sizeof(*entry));
+
+ UPDATE_HEAD(mb->cmd_head, command_size, udev->cmdr_size);
+ tcmu_flush_dcache_range(mb, sizeof(*mb));
+
+ spin_unlock_irq(&udev->cmdr_lock);
+
+ /* TODO: only if FLUSH and FUA? */
+ uio_event_notify(&udev->uio_info);
+
+ mod_timer(&udev->timeout,
+ round_jiffies_up(jiffies + msecs_to_jiffies(TCMU_TIME_OUT)));
+
+ return 0;
+}
+
+static int tcmu_queue_cmd(struct se_cmd *se_cmd)
+{
+ struct se_device *se_dev = se_cmd->se_dev;
+ struct tcmu_dev *udev = TCMU_DEV(se_dev);
+ struct tcmu_cmd *tcmu_cmd;
+ int ret;
+
+ tcmu_cmd = tcmu_alloc_cmd(se_cmd);
+ if (!tcmu_cmd)
+ return -ENOMEM;
+
+ ret = tcmu_queue_cmd_ring(tcmu_cmd);
+ if (ret < 0) {
+ pr_err("TCMU: Could not queue command\n");
+ spin_lock_irq(&udev->commands_lock);
+ idr_remove(&udev->commands, tcmu_cmd->cmd_id);
+ spin_unlock_irq(&udev->commands_lock);
+
+ kmem_cache_free(tcmu_cmd_cache, tcmu_cmd);
+ }
+
+ return ret;
+}
+
+static void tcmu_handle_completion(struct tcmu_cmd *cmd, struct tcmu_cmd_entry *entry)
+{
+ struct se_cmd *se_cmd = cmd->se_cmd;
+ struct tcmu_dev *udev = cmd->tcmu_dev;
+
+ if (test_bit(TCMU_CMD_BIT_EXPIRED, &cmd->flags)) {
+ /* cmd has been completed already from timeout, just reclaim data
+ ring space */
+ UPDATE_HEAD(udev->data_tail, cmd->data_length, udev->data_size);
+ return;
+ }
+
+ if (entry->rsp.scsi_status == SAM_STAT_CHECK_CONDITION) {
+ memcpy(se_cmd->sense_buffer, entry->rsp.sense_buffer,
+ se_cmd->scsi_sense_length);
+
+ UPDATE_HEAD(udev->data_tail, cmd->data_length, udev->data_size);
+ }
+ else if (se_cmd->data_direction == DMA_FROM_DEVICE) {
+ struct scatterlist *sg;
+ int i;
+
+ /* It'd be easier to look at entry's iovec again, but UAM */
+ for_each_sg(se_cmd->t_data_sg, sg, se_cmd->t_data_nents, i) {
+ size_t copy_bytes;
+ void *to;
+ void *from;
+
+ copy_bytes = min((size_t)sg->length,
+ head_to_end(udev->data_tail, udev->data_size));
+
+ to = kmap_atomic(sg_page(sg)) + sg->offset;
+ WARN_ON(sg->length + sg->offset > PAGE_SIZE);
+ from = (void *) udev->mb_addr + udev->data_off + udev->data_tail;
+ tcmu_flush_dcache_range(from, copy_bytes);
+ memcpy(to, from, copy_bytes);
+
+ UPDATE_HEAD(udev->data_tail, copy_bytes, udev->data_size);
+
+ /* Uh oh, wrapped the data buffer for this sg's data */
+ if (sg->length != copy_bytes) {
+ from = (void *) udev->mb_addr + udev->data_off + udev->data_tail;
+ WARN_ON(udev->data_tail);
+ to += copy_bytes;
+ copy_bytes = sg->length - copy_bytes;
+ tcmu_flush_dcache_range(from, copy_bytes);
+ memcpy(to, from, copy_bytes);
+
+ UPDATE_HEAD(udev->data_tail, copy_bytes, udev->data_size);
+ }
+
+ kunmap_atomic(to);
+ }
+
+ } else if (se_cmd->data_direction == DMA_TO_DEVICE) {
+ UPDATE_HEAD(udev->data_tail, cmd->data_length, udev->data_size);
+ } else {
+ pr_warn("TCMU: data direction was %d!\n", se_cmd->data_direction);
+ }
+
+ target_complete_cmd(cmd->se_cmd, entry->rsp.scsi_status);
+ cmd->se_cmd = NULL;
+
+ kmem_cache_free(tcmu_cmd_cache, cmd);
+}
+
+static unsigned int tcmu_handle_completions(struct tcmu_dev *udev)
+{
+ struct tcmu_mailbox *mb;
+ LIST_HEAD(cpl_cmds);
+ unsigned long flags;
+ int handled = 0;
+
+ if (test_bit(TCMU_DEV_BIT_BROKEN, &udev->flags)) {
+ pr_err("ring broken, not handling completions\n");
+ return 0;
+ }
+
+ spin_lock_irqsave(&udev->cmdr_lock, flags);
+
+ mb = udev->mb_addr;
+ tcmu_flush_dcache_range(mb, sizeof(*mb));
+
+ while (udev->cmdr_last_cleaned != ACCESS_ONCE(mb->cmd_tail)) {
+
+ struct tcmu_cmd_entry *entry = (void *) mb + CMDR_OFF + udev->cmdr_last_cleaned;
+ struct tcmu_cmd *cmd;
+
+ tcmu_flush_dcache_range(entry, sizeof(*entry));
+
+ if (tcmu_hdr_get_op(&entry->hdr) == TCMU_OP_PAD) {
+ UPDATE_HEAD(udev->cmdr_last_cleaned, tcmu_hdr_get_len(&entry->hdr), udev->cmdr_size);
+ continue;
+ }
+ WARN_ON(tcmu_hdr_get_op(&entry->hdr) != TCMU_OP_CMD);
+
+ spin_lock(&udev->commands_lock);
+ cmd = idr_find(&udev->commands, entry->cmd_id);
+ if (cmd)
+ idr_remove(&udev->commands, cmd->cmd_id);
+ spin_unlock(&udev->commands_lock);
+
+ if (!cmd) {
+ pr_err("cmd_id not found, ring is broken\n");
+ set_bit(TCMU_DEV_BIT_BROKEN, &udev->flags);
+ break;
+ }
+
+ tcmu_handle_completion(cmd, entry);
+
+ UPDATE_HEAD(udev->cmdr_last_cleaned, tcmu_hdr_get_len(&entry->hdr), udev->cmdr_size);
+
+ handled++;
+ }
+
+ if (mb->cmd_tail == mb->cmd_head)
+ del_timer(&udev->timeout); /* no more pending cmds */
+
+ spin_unlock_irqrestore(&udev->cmdr_lock, flags);
+
+ wake_up(&udev->wait_cmdr);
+
+ return handled;
+}
+
+static int tcmu_check_expired_cmd(int id, void *p, void *data)
+{
+ struct tcmu_cmd *cmd = p;
+
+ if (test_bit(TCMU_CMD_BIT_EXPIRED, &cmd->flags))
+ return 0;
+
+ if (!time_after(cmd->deadline, jiffies))
+ return 0;
+
+ set_bit(TCMU_CMD_BIT_EXPIRED, &cmd->flags);
+ target_complete_cmd(cmd->se_cmd, SAM_STAT_CHECK_CONDITION);
+ cmd->se_cmd = NULL;
+
+ kmem_cache_free(tcmu_cmd_cache, cmd);
+
+ return 0;
+}
+
+static void tcmu_device_timedout(unsigned long data)
+{
+ struct tcmu_dev *udev = (struct tcmu_dev *)data;
+ unsigned long flags;
+ int handled;
+
+ handled = tcmu_handle_completions(udev);
+
+ pr_warn("%d completions handled from timeout\n", handled);
+
+ spin_lock_irqsave(&udev->commands_lock, flags);
+ idr_for_each(&udev->commands, tcmu_check_expired_cmd, NULL);
+ spin_unlock_irqrestore(&udev->commands_lock, flags);
+
+ /*
+ * We don't need to wakeup threads on wait_cmdr since they have their
+ * own timeout.
+ */
+}
+
+static int tcmu_attach_hba(struct se_hba *hba, u32 host_id)
+{
+ struct tcmu_hba *tcmu_hba;
+
+ tcmu_hba = kzalloc(sizeof(struct tcmu_hba), GFP_KERNEL);
+ if (!tcmu_hba)
+ return -ENOMEM;
+
+ tcmu_hba->host_id = host_id;
+ hba->hba_ptr = tcmu_hba;
+
+ return 0;
+}
+
+static void tcmu_detach_hba(struct se_hba *hba)
+{
+ kfree(hba->hba_ptr);
+ hba->hba_ptr = NULL;
+}
+
+static struct se_device *tcmu_alloc_device(struct se_hba *hba, const char *name)
+{
+ struct tcmu_dev *udev;
+
+ udev = kzalloc(sizeof(struct tcmu_dev), GFP_KERNEL);
+ if (!udev)
+ return NULL;
+
+ udev->name = kstrdup(name, GFP_KERNEL);
+ if (!udev->name) {
+ kfree(udev);
+ return NULL;
+ }
+
+ udev->hba = hba;
+
+ init_waitqueue_head(&udev->wait_cmdr);
+ spin_lock_init(&udev->cmdr_lock);
+
+ idr_init(&udev->commands);
+ spin_lock_init(&udev->commands_lock);
+
+ setup_timer(&udev->timeout, tcmu_device_timedout,
+ (unsigned long)udev);
+
+ udev->pass_level = TCMU_PASS_ALL;
+
+ return &udev->se_dev;
+}
+
+static int tcmu_irqcontrol(struct uio_info *info, s32 irq_on)
+{
+ struct tcmu_dev *tcmu_dev = container_of(info, struct tcmu_dev, uio_info);
+
+ tcmu_handle_completions(tcmu_dev);
+
+ return 0;
+}
+
+/*
+ * mmap code from uio.c. Copied here because we want to hook mmap()
+ * and this stuff must come along.
+ */
+static int tcmu_find_mem_index(struct vm_area_struct *vma)
+{
+ struct tcmu_dev *udev = vma->vm_private_data;
+ struct uio_info *info = &udev->uio_info;
+
+ if (vma->vm_pgoff < MAX_UIO_MAPS) {
+ if (info->mem[vma->vm_pgoff].size == 0)
+ return -1;
+ return (int)vma->vm_pgoff;
+ }
+ return -1;
+}
+
+static int tcmu_vma_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
+{
+ struct tcmu_dev *udev = vma->vm_private_data;
+ struct uio_info *info = &udev->uio_info;
+ struct page *page;
+ unsigned long offset;
+ void *addr;
+
+ int mi = tcmu_find_mem_index(vma);
+ if (mi < 0)
+ return VM_FAULT_SIGBUS;
+
+ /*
+ * We need to subtract mi because userspace uses offset = N*PAGE_SIZE
+ * to use mem[N].
+ */
+ offset = (vmf->pgoff - mi) << PAGE_SHIFT;
+
+ addr = (void *)(unsigned long)info->mem[mi].addr + offset;
+ if (info->mem[mi].memtype == UIO_MEM_LOGICAL)
+ page = virt_to_page(addr);
+ else
+ page = vmalloc_to_page(addr);
+ get_page(page);
+ vmf->page = page;
+ return 0;
+}
+
+static const struct vm_operations_struct tcmu_vm_ops = {
+ .fault = tcmu_vma_fault,
+};
+
+static int tcmu_mmap(struct uio_info *info, struct vm_area_struct *vma)
+{
+ struct tcmu_dev *udev = container_of(info, struct tcmu_dev, uio_info);
+
+ vma->vm_flags |= VM_DONTEXPAND | VM_DONTDUMP;
+ vma->vm_ops = &tcmu_vm_ops;
+
+ vma->vm_private_data = udev;
+
+ /* Ensure the mmap is exactly the right size */
+ if (vma_pages(vma) != (TCMU_RING_SIZE >> PAGE_SHIFT))
+ return -EINVAL;
+
+ return 0;
+}
+
+static int tcmu_open(struct uio_info *info, struct inode *inode)
+{
+ struct tcmu_dev *udev = container_of(info, struct tcmu_dev, uio_info);
+
+ /* O_EXCL not supported for char devs, so fake it? */
+ if (test_and_set_bit(TCMU_DEV_BIT_OPEN, &udev->flags))
+ return -EBUSY;
+
+ pr_debug("open\n");
+
+ return 0;
+}
+
+static int tcmu_release(struct uio_info *info, struct inode *inode)
+{
+ struct tcmu_dev *udev = container_of(info, struct tcmu_dev, uio_info);
+
+ clear_bit(TCMU_DEV_BIT_OPEN, &udev->flags);
+
+ pr_debug("close\n");
+
+ return 0;
+}
+
+static int tcmu_netlink_event(enum tcmu_genl_cmd cmd, const char *name, int minor)
+{
+ struct sk_buff *skb;
+ void *msg_header;
+ int ret = -ENOMEM;
+
+ skb = genlmsg_new(NLMSG_GOODSIZE, GFP_KERNEL);
+ if (!skb)
+ return ret;
+
+ msg_header = genlmsg_put(skb, 0, 0, &tcmu_genl_family, 0, cmd);
+ if (!msg_header)
+ goto free_skb;
+
+ ret = nla_put_string(skb, TCMU_ATTR_DEVICE, name);
+ if (ret < 0)
+ goto free_skb;
+
+ ret = nla_put_u32(skb, TCMU_ATTR_MINOR, minor);
+ if (ret < 0)
+ goto free_skb;
+
+ ret = genlmsg_end(skb, msg_header);
+ if (ret < 0)
+ goto free_skb;
+
+ ret = genlmsg_multicast(&tcmu_genl_family, skb, 0,
+ TCMU_MCGRP_CONFIG, GFP_KERNEL);
+
+ /* We don't care if no one is listening */
+ if (ret == -ESRCH)
+ ret = 0;
+
+ return ret;
+free_skb:
+ nlmsg_free(skb);
+ return ret;
+}
+
+static int tcmu_configure_device(struct se_device *dev)
+{
+ struct tcmu_dev *udev = TCMU_DEV(dev);
+ struct tcmu_hba *hba = udev->hba->hba_ptr;
+ struct uio_info *info;
+ struct tcmu_mailbox *mb;
+ size_t size;
+ size_t used;
+ int ret = 0;
+ char *str;
+
+ info = &udev->uio_info;
+
+ size = snprintf(NULL, 0, "tcm-user/%u/%s/%s", hba->host_id, udev->name,
+ udev->dev_config);
+ size += 1; /* for \0 */
+ str = kmalloc(size, GFP_KERNEL);
+ if (!str)
+ return -ENOMEM;
+
+ used = snprintf(str, size, "tcm-user/%u/%s", hba->host_id, udev->name);
+
+ if (udev->dev_config[0])
+ snprintf(str + used, size - used, "/%s", udev->dev_config);
+
+ info->name = str;
+
+ udev->mb_addr = vzalloc(TCMU_RING_SIZE);
+ if (!udev->mb_addr) {
+ ret = -ENOMEM;
+ goto err_vzalloc;
+ }
+
+ /* mailbox fits in first part of CMDR space */
+ udev->cmdr_size = CMDR_SIZE - CMDR_OFF;
+ udev->data_off = CMDR_SIZE;
+ udev->data_size = TCMU_RING_SIZE - CMDR_SIZE;
+
+ mb = udev->mb_addr;
+ mb->version = 1;
+ mb->cmdr_off = CMDR_OFF;
+ mb->cmdr_size = udev->cmdr_size;
+
+ WARN_ON(!PAGE_ALIGNED(udev->data_off));
+ WARN_ON(udev->data_size % PAGE_SIZE);
+
+ info->version = "1";
+
+ info->mem[0].name = "tcm-user command & data buffer";
+ info->mem[0].addr = (phys_addr_t) udev->mb_addr;
+ info->mem[0].size = TCMU_RING_SIZE;
+ info->mem[0].memtype = UIO_MEM_VIRTUAL;
+
+ info->irqcontrol = tcmu_irqcontrol;
+ info->irq = UIO_IRQ_CUSTOM;
+
+ info->mmap = tcmu_mmap;
+ info->open = tcmu_open;
+ info->release = tcmu_release;
+
+ ret = uio_register_device(tcmu_root_device, info);
+ if (ret)
+ goto err_register;
+
+ /* Other attributes can be configured in userspace */
+ dev->dev_attrib.hw_block_size = 512;
+ dev->dev_attrib.hw_max_sectors = 128;
+ dev->dev_attrib.hw_queue_depth = 128;
+
+ ret = tcmu_netlink_event(TCMU_CMD_ADDED_DEVICE, udev->uio_info.name,
+ udev->uio_info.uio_dev->minor);
+ if (ret)
+ goto err_netlink;
+
+ return 0;
+
+err_netlink:
+ uio_unregister_device(&udev->uio_info);
+err_register:
+ vfree(udev->mb_addr);
+err_vzalloc:
+ kfree(info->name);
+
+ return ret;
+}
+
+static int tcmu_check_pending_cmd(int id, void *p, void *data)
+{
+ struct tcmu_cmd *cmd = p;
+
+ if (test_bit(TCMU_CMD_BIT_EXPIRED, &cmd->flags))
+ return 0;
+ return -EINVAL;
+}
+
+static void tcmu_free_device(struct se_device *dev)
+{
+ struct tcmu_dev *udev = TCMU_DEV(dev);
+ int i;
+
+ del_timer_sync(&udev->timeout);
+
+ vfree(udev->mb_addr);
+
+ /* Upper layer should drain all requests before calling this */
+ spin_lock_irq(&udev->commands_lock);
+ i = idr_for_each(&udev->commands, tcmu_check_pending_cmd, NULL);
+ idr_destroy(&udev->commands);
+ spin_unlock_irq(&udev->commands_lock);
+ WARN_ON(i);
+
+ /* Device was configured */
+ if (udev->uio_info.uio_dev) {
+ tcmu_netlink_event(TCMU_CMD_REMOVED_DEVICE, udev->uio_info.name,
+ udev->uio_info.uio_dev->minor);
+
+ uio_unregister_device(&udev->uio_info);
+ kfree(udev->uio_info.name);
+ kfree(udev->name);
+ }
+
+ kfree(udev);
+}
+
+enum {
+ Opt_dev_config, Opt_dev_size, Opt_err, Opt_pass_level,
+};
+
+static match_table_t tokens = {
+ {Opt_dev_config, "dev_config=%s"},
+ {Opt_dev_size, "dev_size=%u"},
+ {Opt_pass_level, "pass_level=%u"},
+ {Opt_err, NULL}
+};
+
+static ssize_t tcmu_set_configfs_dev_params(struct se_device *dev,
+ const char *page, ssize_t count)
+{
+ struct tcmu_dev *udev = TCMU_DEV(dev);
+ char *orig, *ptr, *opts, *arg_p;
+ substring_t args[MAX_OPT_ARGS];
+ int ret = 0, token;
+ int arg;
+
+ opts = kstrdup(page, GFP_KERNEL);
+ if (!opts)
+ return -ENOMEM;
+
+ orig = opts;
+
+ while ((ptr = strsep(&opts, ",\n")) != NULL) {
+ if (!*ptr)
+ continue;
+
+ token = match_token(ptr, tokens, args);
+ switch (token) {
+ case Opt_dev_config:
+ if (match_strlcpy(udev->dev_config, &args[0],
+ TCMU_CONFIG_LEN) == 0) {
+ ret = -EINVAL;
+ break;
+ }
+ pr_debug("TCMU: Referencing Path: %s\n", udev->dev_config);
+ break;
+ case Opt_dev_size:
+ arg_p = match_strdup(&args[0]);
+ if (!arg_p) {
+ ret = -ENOMEM;
+ break;
+ }
+ ret = kstrtoul(arg_p, 0, (unsigned long *) &udev->dev_size);
+ kfree(arg_p);
+ if (ret < 0)
+ pr_err("kstrtoul() failed for dev_size=\n");
+ break;
+ case Opt_pass_level:
+ match_int(args, &arg);
+ if (arg >= TCMU_PASS_INVALID) {
+ pr_warn("TCMU: Invalid pass_level: %d\n", arg);
+ break;
+ }
+
+ pr_debug("TCMU: Setting pass_level to %d\n", arg);
+ udev->pass_level = arg;
+ break;
+ default:
+ break;
+ }
+ }
+
+ kfree(orig);
+ return (!ret) ? count : ret;
+}
+
+static ssize_t tcmu_show_configfs_dev_params(struct se_device *dev, char *b)
+{
+ struct tcmu_dev *udev = TCMU_DEV(dev);
+ ssize_t bl = 0;
+
+ bl = sprintf(b + bl, "Config: %s ",
+ udev->dev_config[0] ? udev->dev_config : "NULL");
+ bl += sprintf(b + bl, "Size: %zu PassLevel: %u\n",
+ udev->dev_size, udev->pass_level);
+
+ return bl;
+}
+
+static sector_t tcmu_get_blocks(struct se_device *dev)
+{
+ struct tcmu_dev *udev = TCMU_DEV(dev);
+
+ return div_u64(udev->dev_size - dev->dev_attrib.block_size,
+ dev->dev_attrib.block_size);
+}
+
+static sense_reason_t
+tcmu_execute_rw(struct se_cmd *se_cmd, struct scatterlist *sgl, u32 sgl_nents,
+ enum dma_data_direction data_direction)
+{
+ int ret;
+
+ ret = tcmu_queue_cmd(se_cmd);
+
+ if (ret != 0)
+ return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
+ else
+ return TCM_NO_SENSE;
+}
+
+static sense_reason_t
+tcmu_pass_op(struct se_cmd *se_cmd)
+{
+ int ret = tcmu_queue_cmd(se_cmd);
+
+ if (ret != 0)
+ return TCM_LOGICAL_UNIT_COMMUNICATION_FAILURE;
+ else
+ return TCM_NO_SENSE;
+}
+
+static struct sbc_ops tcmu_sbc_ops = {
+ .execute_rw = tcmu_execute_rw,
+ .execute_sync_cache = tcmu_pass_op,
+ .execute_write_same = tcmu_pass_op,
+ .execute_write_same_unmap = tcmu_pass_op,
+ .execute_unmap = tcmu_pass_op,
+};
+
+static sense_reason_t
+tcmu_parse_cdb(struct se_cmd *cmd)
+{
+ unsigned char *cdb = cmd->t_task_cdb;
+ struct tcmu_dev *udev = TCMU_DEV(cmd->se_dev);
+ sense_reason_t ret;
+
+ switch (udev->pass_level) {
+ case TCMU_PASS_ALL:
+ /* We're just like pscsi, then */
+ /*
+ * For REPORT LUNS we always need to emulate the response, for everything
+ * else, pass it up.
+ */
+ switch (cdb[0]) {
+ case REPORT_LUNS:
+ cmd->execute_cmd = spc_emulate_report_luns;
+ break;
+ case READ_6:
+ case READ_10:
+ case READ_12:
+ case READ_16:
+ case WRITE_6:
+ case WRITE_10:
+ case WRITE_12:
+ case WRITE_16:
+ case WRITE_VERIFY:
+ cmd->se_cmd_flags |= SCF_SCSI_DATA_CDB;
+ /* FALLTHROUGH */
+ default:
+ cmd->execute_cmd = tcmu_pass_op;
+ }
+ ret = TCM_NO_SENSE;
+ break;
+ case TCMU_PASS_IO:
+ ret = sbc_parse_cdb(cmd, &tcmu_sbc_ops);
+ break;
+ default:
+ pr_err("Unknown tcm-user pass level %d\n", udev->pass_level);
+ ret = TCM_CHECK_CONDITION_ABORT_CMD;
+ }
+
+ return ret;
+}
+
+static struct se_subsystem_api tcmu_template = {
+ .name = "user",
+ .inquiry_prod = "USER",
+ .inquiry_rev = TCMU_VERSION,
+ .owner = THIS_MODULE,
+ .transport_type = TRANSPORT_PLUGIN_VHBA_PDEV,
+ .attach_hba = tcmu_attach_hba,
+ .detach_hba = tcmu_detach_hba,
+ .alloc_device = tcmu_alloc_device,
+ .configure_device = tcmu_configure_device,
+ .free_device = tcmu_free_device,
+ .parse_cdb = tcmu_parse_cdb,
+ .set_configfs_dev_params = tcmu_set_configfs_dev_params,
+ .show_configfs_dev_params = tcmu_show_configfs_dev_params,
+ .get_device_type = sbc_get_device_type,
+ .get_blocks = tcmu_get_blocks,
+};
+
+static int __init tcmu_module_init(void)
+{
+ int ret;
+
+ BUILD_BUG_ON((sizeof(struct tcmu_cmd_entry) % TCMU_OP_ALIGN_SIZE) != 0);
+
+ tcmu_cmd_cache = kmem_cache_create("tcmu_cmd_cache",
+ sizeof(struct tcmu_cmd),
+ __alignof__(struct tcmu_cmd),
+ 0, NULL);
+ if (!tcmu_cmd_cache)
+ return -ENOMEM;
+
+ tcmu_root_device = root_device_register("tcm_user");
+ if (IS_ERR(tcmu_root_device)) {
+ ret = PTR_ERR(tcmu_root_device);
+ goto out_free_cache;
+ }
+
+ ret = genl_register_family(&tcmu_genl_family);
+ if (ret < 0) {
+ goto out_unreg_device;
+ }
+
+ ret = transport_subsystem_register(&tcmu_template);
+ if (ret)
+ goto out_unreg_genl;
+
+ return 0;
+
+out_unreg_genl:
+ genl_unregister_family(&tcmu_genl_family);
+out_unreg_device:
+ root_device_unregister(tcmu_root_device);
+out_free_cache:
+ kmem_cache_destroy(tcmu_cmd_cache);
+
+ return ret;
+}
+
+static void __exit tcmu_module_exit(void)
+{
+ transport_subsystem_release(&tcmu_template);
+ genl_unregister_family(&tcmu_genl_family);
+ root_device_unregister(tcmu_root_device);
+ kmem_cache_destroy(tcmu_cmd_cache);
+}
+
+MODULE_DESCRIPTION("TCM USER subsystem plugin");
+MODULE_AUTHOR("Shaohua Li <shli@kernel.org>");
+MODULE_AUTHOR("Andy Grover <agrover@redhat.com>");
+MODULE_LICENSE("GPL");
+
+module_init(tcmu_module_init);
+module_exit(tcmu_module_exit);
ft_sess_delete_all(tport);
lport = tport->lport;
BUG_ON(tport != lport->prov[FC_TYPE_FCP]);
- rcu_assign_pointer(lport->prov[FC_TYPE_FCP], NULL);
+ RCU_INIT_POINTER(lport->prov[FC_TYPE_FCP], NULL);
tpg = tport->tpg;
if (tpg) {
Enable this to manage platform thermals using a simple linear
governor.
+config THERMAL_GOV_BANG_BANG
+ bool "Bang Bang thermal governor"
+ default n
+ help
+ Enable this to manage platform thermals using bang bang governor.
+
+ Say 'Y' here if you want to use two point temperature regulation
+ used for fans without throttling. Some fan drivers depend on this
+ governor to be enabled (e.g. acerhdf).
+
config THERMAL_GOV_USER_SPACE
bool "User_space thermal governor"
help
two trip points which can be set by user to get notifications via thermal
notification methods.
-config ACPI_INT3403_THERMAL
- tristate "ACPI INT3403 thermal driver"
- depends on X86 && ACPI
- help
- Newer laptops and tablets that use ACPI may have thermal sensors
- outside the core CPU/SOC for thermal safety reasons. These
- temperature sensors are also exposed for the OS to use via the so
- called INT3403 ACPI object. This driver will, on devices that have
- such sensors, expose the temperature information from these sensors
- to userspace via the normal thermal framework. This means that a wide
- range of applications and GUI widgets can show this information to
- the user or use this information for making decisions. For example,
- the Intel Thermal Daemon can use this information to allow the user
- to select his laptop to run without turning on the fans.
-
config INTEL_SOC_DTS_THERMAL
tristate "Intel SoCs DTS thermal driver"
depends on X86 && IOSF_MBI
notification methods.The other trip is a critical trip point, which
was set by the driver based on the TJ MAX temperature.
+config INT340X_THERMAL
+ tristate "ACPI INT340X thermal drivers"
+ depends on X86 && ACPI
+ select THERMAL_GOV_USER_SPACE
+ select ACPI_THERMAL_REL
+ select ACPI_FAN
+ help
+ Newer laptops and tablets that use ACPI may have thermal sensors and
+ other devices with thermal control capabilities outside the core
+ CPU/SOC, for thermal safety reasons.
+ They are exposed for the OS to use via the INT3400 ACPI device object
+ as the master, and INT3401~INT340B ACPI device objects as the slaves.
+ Enable this to expose the temperature information and cooling ability
+ from these objects to userspace via the normal thermal framework.
+ This means that a wide range of applications and GUI widgets can show
+ the information to the user or use this information for making
+ decisions. For example, the Intel Thermal Daemon can use this
+ information to allow the user to select his laptop to run without
+ turning on the fans.
+
+config ACPI_THERMAL_REL
+ tristate
+ depends on ACPI
+
menu "Texas Instruments thermal drivers"
source "drivers/thermal/ti-soc-thermal/Kconfig"
endmenu
# governors
thermal_sys-$(CONFIG_THERMAL_GOV_FAIR_SHARE) += fair_share.o
+thermal_sys-$(CONFIG_THERMAL_GOV_BANG_BANG) += gov_bang_bang.o
thermal_sys-$(CONFIG_THERMAL_GOV_STEP_WISE) += step_wise.o
thermal_sys-$(CONFIG_THERMAL_GOV_USER_SPACE) += user_space.o
obj-$(CONFIG_X86_PKG_TEMP_THERMAL) += x86_pkg_temp_thermal.o
obj-$(CONFIG_INTEL_SOC_DTS_THERMAL) += intel_soc_dts_thermal.o
obj-$(CONFIG_TI_SOC_THERMAL) += ti-soc-thermal/
-obj-$(CONFIG_ACPI_INT3403_THERMAL) += int3403_thermal.o
+obj-$(CONFIG_INT340X_THERMAL) += int340x_thermal/
obj-$(CONFIG_ST_THERMAL) += st/
unsigned int cpufreq_state;
unsigned int cpufreq_val;
struct cpumask allowed_cpus;
+ struct list_head node;
};
static DEFINE_IDR(cpufreq_idr);
static DEFINE_MUTEX(cooling_cpufreq_lock);
static unsigned int cpufreq_dev_count;
-/* notify_table passes value to the CPUFREQ_ADJUST callback function. */
-#define NOTIFY_INVALID NULL
-static struct cpufreq_cooling_device *notify_device;
+static LIST_HEAD(cpufreq_dev_list);
/**
* get_idr - function to get a unique id.
cpufreq_device->cpufreq_state = cooling_state;
cpufreq_device->cpufreq_val = clip_freq;
- notify_device = cpufreq_device;
for_each_cpu(cpuid, mask) {
if (is_cpufreq_valid(cpuid))
cpufreq_update_policy(cpuid);
}
- notify_device = NOTIFY_INVALID;
-
return 0;
}
{
struct cpufreq_policy *policy = data;
unsigned long max_freq = 0;
+ struct cpufreq_cooling_device *cpufreq_dev;
- if (event != CPUFREQ_ADJUST || notify_device == NOTIFY_INVALID)
+ if (event != CPUFREQ_ADJUST)
return 0;
- if (cpumask_test_cpu(policy->cpu, ¬ify_device->allowed_cpus))
- max_freq = notify_device->cpufreq_val;
- else
- return 0;
+ mutex_lock(&cooling_cpufreq_lock);
+ list_for_each_entry(cpufreq_dev, &cpufreq_dev_list, node) {
+ if (!cpumask_test_cpu(policy->cpu,
+ &cpufreq_dev->allowed_cpus))
+ continue;
+
+ if (!cpufreq_dev->cpufreq_val)
+ cpufreq_dev->cpufreq_val = get_cpu_frequency(
+ cpumask_any(&cpufreq_dev->allowed_cpus),
+ cpufreq_dev->cpufreq_state);
- /* Never exceed user_policy.max */
- if (max_freq > policy->user_policy.max)
- max_freq = policy->user_policy.max;
+ max_freq = cpufreq_dev->cpufreq_val;
- if (policy->max != max_freq)
- cpufreq_verify_within_limits(policy, 0, max_freq);
+ if (policy->max != max_freq)
+ cpufreq_verify_within_limits(policy, 0, max_freq);
+ }
+ mutex_unlock(&cooling_cpufreq_lock);
return 0;
}
cpufreq_register_notifier(&thermal_cpufreq_notifier_block,
CPUFREQ_POLICY_NOTIFIER);
cpufreq_dev_count++;
+ list_add(&cpufreq_dev->node, &cpufreq_dev_list);
mutex_unlock(&cooling_cpufreq_lock);
cpufreq_dev = cdev->devdata;
mutex_lock(&cooling_cpufreq_lock);
+ list_del(&cpufreq_dev->node);
cpufreq_dev_count--;
/* Unregister the notifier for the last cpufreq cooling device */
*/
#include <linux/thermal.h>
+#include <trace/events/thermal.h>
#include "thermal_core.h"
{
int count = 0;
unsigned long trip_temp;
+ enum thermal_trip_type trip_type;
if (tz->trips == 0 || !tz->ops->get_trip_temp)
return 0;
if (tz->temperature < trip_temp)
break;
}
+
+ /*
+ * count > 0 only if temperature is greater than first trip
+ * point, in which case, trip_point = count - 1
+ */
+ if (count > 0) {
+ tz->ops->get_trip_type(tz, count - 1, &trip_type);
+ trace_thermal_zone_trip(tz, count - 1, trip_type);
+ }
+
return count;
}
--- /dev/null
+/*
+ * gov_bang_bang.c - A simple thermal throttling governor using hysteresis
+ *
+ * Copyright (C) 2014 Peter Feuerer <peter@piie.net>
+ *
+ * Based on step_wise.c with following Copyrights:
+ * Copyright (C) 2012 Intel Corp
+ * Copyright (C) 2012 Durgadoss R <durgadoss.r@intel.com>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, version 2.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See
+ * the GNU General Public License for more details.
+ *
+ */
+
+#include <linux/thermal.h>
+
+#include "thermal_core.h"
+
+static void thermal_zone_trip_update(struct thermal_zone_device *tz, int trip)
+{
+ long trip_temp;
+ unsigned long trip_hyst;
+ struct thermal_instance *instance;
+
+ tz->ops->get_trip_temp(tz, trip, &trip_temp);
+ tz->ops->get_trip_hyst(tz, trip, &trip_hyst);
+
+ dev_dbg(&tz->device, "Trip%d[temp=%ld]:temp=%d:hyst=%ld\n",
+ trip, trip_temp, tz->temperature,
+ trip_hyst);
+
+ mutex_lock(&tz->lock);
+
+ list_for_each_entry(instance, &tz->thermal_instances, tz_node) {
+ if (instance->trip != trip)
+ continue;
+
+ /* in case fan is in initial state, switch the fan off */
+ if (instance->target == THERMAL_NO_TARGET)
+ instance->target = 0;
+
+ /* in case fan is neither on nor off set the fan to active */
+ if (instance->target != 0 && instance->target != 1) {
+ pr_warn("Thermal instance %s controlled by bang-bang has unexpected state: %ld\n",
+ instance->name, instance->target);
+ instance->target = 1;
+ }
+
+ /*
+ * enable fan when temperature exceeds trip_temp and disable
+ * the fan in case it falls below trip_temp minus hysteresis
+ */
+ if (instance->target == 0 && tz->temperature >= trip_temp)
+ instance->target = 1;
+ else if (instance->target == 1 &&
+ tz->temperature < trip_temp - trip_hyst)
+ instance->target = 0;
+
+ dev_dbg(&instance->cdev->device, "target=%d\n",
+ (int)instance->target);
+
+ instance->cdev->updated = false; /* cdev needs update */
+ }
+
+ mutex_unlock(&tz->lock);
+}
+
+/**
+ * bang_bang_control - controls devices associated with the given zone
+ * @tz - thermal_zone_device
+ * @trip - the trip point
+ *
+ * Regulation Logic: a two point regulation, deliver cooling state depending
+ * on the previous state shown in this diagram:
+ *
+ * Fan: OFF ON
+ *
+ * |
+ * |
+ * trip_temp: +---->+
+ * | | ^
+ * | | |
+ * | | Temperature
+ * (trip_temp - hyst): +<----+
+ * |
+ * |
+ * |
+ *
+ * * If the fan is not running and temperature exceeds trip_temp, the fan
+ * gets turned on.
+ * * In case the fan is running, temperature must fall below
+ * (trip_temp - hyst) so that the fan gets turned off again.
+ *
+ */
+static int bang_bang_control(struct thermal_zone_device *tz, int trip)
+{
+ struct thermal_instance *instance;
+
+ thermal_zone_trip_update(tz, trip);
+
+ mutex_lock(&tz->lock);
+
+ list_for_each_entry(instance, &tz->thermal_instances, tz_node)
+ thermal_cdev_update(instance->cdev);
+
+ mutex_unlock(&tz->lock);
+
+ return 0;
+}
+
+static struct thermal_governor thermal_gov_bang_bang = {
+ .name = "bang_bang",
+ .throttle = bang_bang_control,
+};
+
+int thermal_gov_bang_bang_register(void)
+{
+ return thermal_register_governor(&thermal_gov_bang_bang);
+}
+
+void thermal_gov_bang_bang_unregister(void)
+{
+ thermal_unregister_governor(&thermal_gov_bang_bang);
+}
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/slab.h>
#define MISC0 0x0150
#define MISC0_REFTOP_SELBIASOFF (1 << 3)
+#define MISC1 0x0160
+#define MISC1_IRQ_TEMPHIGH (1 << 29)
+/* Below LOW and PANIC bits are only for TEMPMON_IMX6SX */
+#define MISC1_IRQ_TEMPLOW (1 << 28)
+#define MISC1_IRQ_TEMPPANIC (1 << 27)
#define TEMPSENSE0 0x0180
#define TEMPSENSE0_ALARM_VALUE_SHIFT 20
#define TEMPSENSE1 0x0190
#define TEMPSENSE1_MEASURE_FREQ 0xffff
+/* Below TEMPSENSE2 is only for TEMPMON_IMX6SX */
+#define TEMPSENSE2 0x0290
+#define TEMPSENSE2_LOW_VALUE_SHIFT 0
+#define TEMPSENSE2_LOW_VALUE_MASK 0xfff
+#define TEMPSENSE2_PANIC_VALUE_SHIFT 16
+#define TEMPSENSE2_PANIC_VALUE_MASK 0xfff0000
#define OCOTP_ANA1 0x04e0
#define FACTOR1 15976
#define FACTOR2 4297157
+#define TEMPMON_IMX6Q 1
+#define TEMPMON_IMX6SX 2
+
+struct thermal_soc_data {
+ u32 version;
+};
+
+static struct thermal_soc_data thermal_imx6q_data = {
+ .version = TEMPMON_IMX6Q,
+};
+
+static struct thermal_soc_data thermal_imx6sx_data = {
+ .version = TEMPMON_IMX6SX,
+};
+
struct imx_thermal_data {
struct thermal_zone_device *tz;
struct thermal_cooling_device *cdev;
bool irq_enabled;
int irq;
struct clk *thermal_clk;
+ const struct thermal_soc_data *socdata;
};
+static void imx_set_panic_temp(struct imx_thermal_data *data,
+ signed long panic_temp)
+{
+ struct regmap *map = data->tempmon;
+ int critical_value;
+
+ critical_value = (data->c2 - panic_temp) / data->c1;
+ regmap_write(map, TEMPSENSE2 + REG_CLR, TEMPSENSE2_PANIC_VALUE_MASK);
+ regmap_write(map, TEMPSENSE2 + REG_SET, critical_value <<
+ TEMPSENSE2_PANIC_VALUE_SHIFT);
+}
+
static void imx_set_alarm_temp(struct imx_thermal_data *data,
signed long alarm_temp)
{
/* See imx_get_sensor_data() for formula derivation */
*temp = data->c2 - n_meas * data->c1;
- /* Update alarm value to next higher trip point */
- if (data->alarm_temp == data->temp_passive && *temp >= data->temp_passive)
- imx_set_alarm_temp(data, data->temp_critical);
- if (data->alarm_temp == data->temp_critical && *temp < data->temp_passive) {
- imx_set_alarm_temp(data, data->temp_passive);
- dev_dbg(&tz->device, "thermal alarm off: T < %lu\n",
- data->alarm_temp / 1000);
+ /* Update alarm value to next higher trip point for TEMPMON_IMX6Q */
+ if (data->socdata->version == TEMPMON_IMX6Q) {
+ if (data->alarm_temp == data->temp_passive &&
+ *temp >= data->temp_passive)
+ imx_set_alarm_temp(data, data->temp_critical);
+ if (data->alarm_temp == data->temp_critical &&
+ *temp < data->temp_passive) {
+ imx_set_alarm_temp(data, data->temp_passive);
+ dev_dbg(&tz->device, "thermal alarm off: T < %lu\n",
+ data->alarm_temp / 1000);
+ }
}
if (*temp != data->last_temp) {
return IRQ_HANDLED;
}
+static const struct of_device_id of_imx_thermal_match[] = {
+ { .compatible = "fsl,imx6q-tempmon", .data = &thermal_imx6q_data, },
+ { .compatible = "fsl,imx6sx-tempmon", .data = &thermal_imx6sx_data, },
+ { /* end */ }
+};
+MODULE_DEVICE_TABLE(of, of_imx_thermal_match);
+
static int imx_thermal_probe(struct platform_device *pdev)
{
+ const struct of_device_id *of_id =
+ of_match_device(of_imx_thermal_match, &pdev->dev);
struct imx_thermal_data *data;
struct cpumask clip_cpus;
struct regmap *map;
int measure_freq;
int ret;
+ if (!cpufreq_get_current_driver()) {
+ dev_dbg(&pdev->dev, "no cpufreq driver!");
+ return -EPROBE_DEFER;
+ }
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
}
data->tempmon = map;
+ data->socdata = of_id->data;
+
+ /* make sure the IRQ flag is clear before enabling irq on i.MX6SX */
+ if (data->socdata->version == TEMPMON_IMX6SX) {
+ regmap_write(map, MISC1 + REG_CLR, MISC1_IRQ_TEMPHIGH |
+ MISC1_IRQ_TEMPLOW | MISC1_IRQ_TEMPPANIC);
+ /*
+ * reset value of LOW ALARM is incorrect, set it to lowest
+ * value to avoid false trigger of low alarm.
+ */
+ regmap_write(map, TEMPSENSE2 + REG_SET,
+ TEMPSENSE2_LOW_VALUE_MASK);
+ }
+
data->irq = platform_get_irq(pdev, 0);
if (data->irq < 0)
return data->irq;
return ret;
}
+ data->thermal_clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(data->thermal_clk)) {
+ ret = PTR_ERR(data->thermal_clk);
+ if (ret != -EPROBE_DEFER)
+ dev_err(&pdev->dev,
+ "failed to get thermal clk: %d\n", ret);
+ cpufreq_cooling_unregister(data->cdev);
+ return ret;
+ }
+
+ /*
+ * Thermal sensor needs clk on to get correct value, normally
+ * we should enable its clk before taking measurement and disable
+ * clk after measurement is done, but if alarm function is enabled,
+ * hardware will auto measure the temperature periodically, so we
+ * need to keep the clk always on for alarm function.
+ */
+ ret = clk_prepare_enable(data->thermal_clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to enable thermal clk: %d\n", ret);
+ cpufreq_cooling_unregister(data->cdev);
+ return ret;
+ }
+
data->tz = thermal_zone_device_register("imx_thermal_zone",
IMX_TRIP_NUM,
BIT(IMX_TRIP_PASSIVE), data,
ret = PTR_ERR(data->tz);
dev_err(&pdev->dev,
"failed to register thermal zone device %d\n", ret);
+ clk_disable_unprepare(data->thermal_clk);
cpufreq_cooling_unregister(data->cdev);
return ret;
}
- data->thermal_clk = devm_clk_get(&pdev->dev, NULL);
- if (IS_ERR(data->thermal_clk)) {
- dev_warn(&pdev->dev, "failed to get thermal clk!\n");
- } else {
- /*
- * Thermal sensor needs clk on to get correct value, normally
- * we should enable its clk before taking measurement and disable
- * clk after measurement is done, but if alarm function is enabled,
- * hardware will auto measure the temperature periodically, so we
- * need to keep the clk always on for alarm function.
- */
- ret = clk_prepare_enable(data->thermal_clk);
- if (ret)
- dev_warn(&pdev->dev, "failed to enable thermal clk: %d\n", ret);
- }
-
/* Enable measurements at ~ 10 Hz */
regmap_write(map, TEMPSENSE1 + REG_CLR, TEMPSENSE1_MEASURE_FREQ);
measure_freq = DIV_ROUND_UP(32768, 10); /* 10 Hz */
regmap_write(map, TEMPSENSE1 + REG_SET, measure_freq);
imx_set_alarm_temp(data, data->temp_passive);
+
+ if (data->socdata->version == TEMPMON_IMX6SX)
+ imx_set_panic_temp(data, data->temp_critical);
+
regmap_write(map, TEMPSENSE0 + REG_CLR, TEMPSENSE0_POWER_DOWN);
regmap_write(map, TEMPSENSE0 + REG_SET, TEMPSENSE0_MEASURE_TEMP);
static SIMPLE_DEV_PM_OPS(imx_thermal_pm_ops,
imx_thermal_suspend, imx_thermal_resume);
-static const struct of_device_id of_imx_thermal_match[] = {
- { .compatible = "fsl,imx6q-tempmon", },
- { /* end */ }
-};
-MODULE_DEVICE_TABLE(of, of_imx_thermal_match);
-
static struct platform_driver imx_thermal = {
.driver = {
.name = "imx_thermal",
+++ /dev/null
-/*
- * ACPI INT3403 thermal driver
- * Copyright (c) 2013, Intel Corporation.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/acpi.h>
-#include <linux/thermal.h>
-
-#define INT3403_TYPE_SENSOR 0x03
-#define INT3403_PERF_CHANGED_EVENT 0x80
-#define INT3403_THERMAL_EVENT 0x90
-
-#define DECI_KELVIN_TO_MILLI_CELSIUS(t, off) (((t) - (off)) * 100)
-#define KELVIN_OFFSET 2732
-#define MILLI_CELSIUS_TO_DECI_KELVIN(t, off) (((t) / 100) + (off))
-
-#define ACPI_INT3403_CLASS "int3403"
-#define ACPI_INT3403_FILE_STATE "state"
-
-struct int3403_sensor {
- struct thermal_zone_device *tzone;
- unsigned long *thresholds;
- unsigned long crit_temp;
- int crit_trip_id;
- unsigned long psv_temp;
- int psv_trip_id;
-};
-
-static int sys_get_curr_temp(struct thermal_zone_device *tzone,
- unsigned long *temp)
-{
- struct acpi_device *device = tzone->devdata;
- unsigned long long tmp;
- acpi_status status;
-
- status = acpi_evaluate_integer(device->handle, "_TMP", NULL, &tmp);
- if (ACPI_FAILURE(status))
- return -EIO;
-
- *temp = DECI_KELVIN_TO_MILLI_CELSIUS(tmp, KELVIN_OFFSET);
-
- return 0;
-}
-
-static int sys_get_trip_hyst(struct thermal_zone_device *tzone,
- int trip, unsigned long *temp)
-{
- struct acpi_device *device = tzone->devdata;
- unsigned long long hyst;
- acpi_status status;
-
- status = acpi_evaluate_integer(device->handle, "GTSH", NULL, &hyst);
- if (ACPI_FAILURE(status))
- return -EIO;
-
- /*
- * Thermal hysteresis represents a temperature difference.
- * Kelvin and Celsius have same degree size. So the
- * conversion here between tenths of degree Kelvin unit
- * and Milli-Celsius unit is just to multiply 100.
- */
- *temp = hyst * 100;
-
- return 0;
-}
-
-static int sys_get_trip_temp(struct thermal_zone_device *tzone,
- int trip, unsigned long *temp)
-{
- struct acpi_device *device = tzone->devdata;
- struct int3403_sensor *obj = acpi_driver_data(device);
-
- if (trip == obj->crit_trip_id)
- *temp = obj->crit_temp;
- else if (trip == obj->psv_trip_id)
- *temp = obj->psv_temp;
- else {
- /*
- * get_trip_temp is a mandatory callback but
- * PATx method doesn't return any value, so return
- * cached value, which was last set from user space.
- */
- *temp = obj->thresholds[trip];
- }
-
- return 0;
-}
-
-static int sys_get_trip_type(struct thermal_zone_device *thermal,
- int trip, enum thermal_trip_type *type)
-{
- struct acpi_device *device = thermal->devdata;
- struct int3403_sensor *obj = acpi_driver_data(device);
-
- /* Mandatory callback, may not mean much here */
- if (trip == obj->crit_trip_id)
- *type = THERMAL_TRIP_CRITICAL;
- else
- *type = THERMAL_TRIP_PASSIVE;
-
- return 0;
-}
-
-int sys_set_trip_temp(struct thermal_zone_device *tzone, int trip,
- unsigned long temp)
-{
- struct acpi_device *device = tzone->devdata;
- acpi_status status;
- char name[10];
- int ret = 0;
- struct int3403_sensor *obj = acpi_driver_data(device);
-
- snprintf(name, sizeof(name), "PAT%d", trip);
- if (acpi_has_method(device->handle, name)) {
- status = acpi_execute_simple_method(device->handle, name,
- MILLI_CELSIUS_TO_DECI_KELVIN(temp,
- KELVIN_OFFSET));
- if (ACPI_FAILURE(status))
- ret = -EIO;
- else
- obj->thresholds[trip] = temp;
- } else {
- ret = -EIO;
- dev_err(&device->dev, "sys_set_trip_temp: method not found\n");
- }
-
- return ret;
-}
-
-static struct thermal_zone_device_ops tzone_ops = {
- .get_temp = sys_get_curr_temp,
- .get_trip_temp = sys_get_trip_temp,
- .get_trip_type = sys_get_trip_type,
- .set_trip_temp = sys_set_trip_temp,
- .get_trip_hyst = sys_get_trip_hyst,
-};
-
-static void acpi_thermal_notify(struct acpi_device *device, u32 event)
-{
- struct int3403_sensor *obj;
-
- if (!device)
- return;
-
- obj = acpi_driver_data(device);
- if (!obj)
- return;
-
- switch (event) {
- case INT3403_PERF_CHANGED_EVENT:
- break;
- case INT3403_THERMAL_EVENT:
- thermal_zone_device_update(obj->tzone);
- break;
- default:
- dev_err(&device->dev, "Unsupported event [0x%x]\n", event);
- break;
- }
-}
-
-static int sys_get_trip_crt(struct acpi_device *device, unsigned long *temp)
-{
- unsigned long long crt;
- acpi_status status;
-
- status = acpi_evaluate_integer(device->handle, "_CRT", NULL, &crt);
- if (ACPI_FAILURE(status))
- return -EIO;
-
- *temp = DECI_KELVIN_TO_MILLI_CELSIUS(crt, KELVIN_OFFSET);
-
- return 0;
-}
-
-static int sys_get_trip_psv(struct acpi_device *device, unsigned long *temp)
-{
- unsigned long long psv;
- acpi_status status;
-
- status = acpi_evaluate_integer(device->handle, "_PSV", NULL, &psv);
- if (ACPI_FAILURE(status))
- return -EIO;
-
- *temp = DECI_KELVIN_TO_MILLI_CELSIUS(psv, KELVIN_OFFSET);
-
- return 0;
-}
-
-static int acpi_int3403_add(struct acpi_device *device)
-{
- int result = 0;
- unsigned long long ptyp;
- acpi_status status;
- struct int3403_sensor *obj;
- unsigned long long trip_cnt;
- int trip_mask = 0;
-
- if (!device)
- return -EINVAL;
-
- status = acpi_evaluate_integer(device->handle, "PTYP", NULL, &ptyp);
- if (ACPI_FAILURE(status))
- return -EINVAL;
-
- if (ptyp != INT3403_TYPE_SENSOR)
- return -EINVAL;
-
- obj = devm_kzalloc(&device->dev, sizeof(*obj), GFP_KERNEL);
- if (!obj)
- return -ENOMEM;
-
- device->driver_data = obj;
-
- status = acpi_evaluate_integer(device->handle, "PATC", NULL,
- &trip_cnt);
- if (ACPI_FAILURE(status))
- trip_cnt = 0;
-
- if (trip_cnt) {
- /* We have to cache, thresholds can't be readback */
- obj->thresholds = devm_kzalloc(&device->dev,
- sizeof(*obj->thresholds) * trip_cnt,
- GFP_KERNEL);
- if (!obj->thresholds)
- return -ENOMEM;
- trip_mask = BIT(trip_cnt) - 1;
- }
-
- obj->psv_trip_id = -1;
- if (!sys_get_trip_psv(device, &obj->psv_temp))
- obj->psv_trip_id = trip_cnt++;
-
- obj->crit_trip_id = -1;
- if (!sys_get_trip_crt(device, &obj->crit_temp))
- obj->crit_trip_id = trip_cnt++;
-
- obj->tzone = thermal_zone_device_register(acpi_device_bid(device),
- trip_cnt, trip_mask, device, &tzone_ops,
- NULL, 0, 0);
- if (IS_ERR(obj->tzone)) {
- result = PTR_ERR(obj->tzone);
- return result;
- }
-
- strcpy(acpi_device_name(device), "INT3403");
- strcpy(acpi_device_class(device), ACPI_INT3403_CLASS);
-
- return 0;
-}
-
-static int acpi_int3403_remove(struct acpi_device *device)
-{
- struct int3403_sensor *obj;
-
- obj = acpi_driver_data(device);
- thermal_zone_device_unregister(obj->tzone);
-
- return 0;
-}
-
-ACPI_MODULE_NAME("int3403");
-static const struct acpi_device_id int3403_device_ids[] = {
- {"INT3403", 0},
- {"", 0},
-};
-MODULE_DEVICE_TABLE(acpi, int3403_device_ids);
-
-static struct acpi_driver acpi_int3403_driver = {
- .name = "INT3403",
- .class = ACPI_INT3403_CLASS,
- .ids = int3403_device_ids,
- .ops = {
- .add = acpi_int3403_add,
- .remove = acpi_int3403_remove,
- .notify = acpi_thermal_notify,
- },
-};
-
-module_acpi_driver(acpi_int3403_driver);
-
-MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
-MODULE_LICENSE("GPL v2");
-MODULE_DESCRIPTION("ACPI INT3403 thermal driver");
--- /dev/null
+obj-$(CONFIG_INT340X_THERMAL) += int3400_thermal.o
+obj-$(CONFIG_INT340X_THERMAL) += int3402_thermal.o
+obj-$(CONFIG_INT340X_THERMAL) += int3403_thermal.o
+obj-$(CONFIG_ACPI_THERMAL_REL) += acpi_thermal_rel.o
--- /dev/null
+/* acpi_thermal_rel.c driver for exporting ACPI thermal relationship
+ *
+ * Copyright (c) 2014 Intel Corp
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ */
+
+/*
+ * Two functionalities included:
+ * 1. Export _TRT, _ART, via misc device interface to the userspace.
+ * 2. Provide parsing result to kernel drivers
+ *
+ */
+#include <linux/init.h>
+#include <linux/export.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/acpi.h>
+#include <linux/uaccess.h>
+#include <linux/miscdevice.h>
+#include "acpi_thermal_rel.h"
+
+static acpi_handle acpi_thermal_rel_handle;
+static DEFINE_SPINLOCK(acpi_thermal_rel_chrdev_lock);
+static int acpi_thermal_rel_chrdev_count; /* #times opened */
+static int acpi_thermal_rel_chrdev_exclu; /* already open exclusive? */
+
+static int acpi_thermal_rel_open(struct inode *inode, struct file *file)
+{
+ spin_lock(&acpi_thermal_rel_chrdev_lock);
+ if (acpi_thermal_rel_chrdev_exclu ||
+ (acpi_thermal_rel_chrdev_count && (file->f_flags & O_EXCL))) {
+ spin_unlock(&acpi_thermal_rel_chrdev_lock);
+ return -EBUSY;
+ }
+
+ if (file->f_flags & O_EXCL)
+ acpi_thermal_rel_chrdev_exclu = 1;
+ acpi_thermal_rel_chrdev_count++;
+
+ spin_unlock(&acpi_thermal_rel_chrdev_lock);
+
+ return nonseekable_open(inode, file);
+}
+
+static int acpi_thermal_rel_release(struct inode *inode, struct file *file)
+{
+ spin_lock(&acpi_thermal_rel_chrdev_lock);
+ acpi_thermal_rel_chrdev_count--;
+ acpi_thermal_rel_chrdev_exclu = 0;
+ spin_unlock(&acpi_thermal_rel_chrdev_lock);
+
+ return 0;
+}
+
+/**
+ * acpi_parse_trt - Thermal Relationship Table _TRT for passive cooling
+ *
+ * @handle: ACPI handle of the device contains _TRT
+ * @art_count: the number of valid entries resulted from parsing _TRT
+ * @artp: pointer to pointer of array of art entries in parsing result
+ * @create_dev: whether to create platform devices for target and source
+ *
+ */
+int acpi_parse_trt(acpi_handle handle, int *trt_count, struct trt **trtp,
+ bool create_dev)
+{
+ acpi_status status;
+ int result = 0;
+ int i;
+ int nr_bad_entries = 0;
+ struct trt *trts;
+ struct acpi_device *adev;
+ union acpi_object *p;
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ struct acpi_buffer element = { 0, NULL };
+ struct acpi_buffer trt_format = { sizeof("RRNNNNNN"), "RRNNNNNN" };
+
+ if (!acpi_has_method(handle, "_TRT"))
+ return 0;
+
+ status = acpi_evaluate_object(handle, "_TRT", NULL, &buffer);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ p = buffer.pointer;
+ if (!p || (p->type != ACPI_TYPE_PACKAGE)) {
+ pr_err("Invalid _TRT data\n");
+ result = -EFAULT;
+ goto end;
+ }
+
+ *trt_count = p->package.count;
+ trts = kzalloc(*trt_count * sizeof(struct trt), GFP_KERNEL);
+ if (!trts) {
+ result = -ENOMEM;
+ goto end;
+ }
+
+ for (i = 0; i < *trt_count; i++) {
+ struct trt *trt = &trts[i - nr_bad_entries];
+
+ element.length = sizeof(struct trt);
+ element.pointer = trt;
+
+ status = acpi_extract_package(&(p->package.elements[i]),
+ &trt_format, &element);
+ if (ACPI_FAILURE(status)) {
+ nr_bad_entries++;
+ pr_warn("_TRT package %d is invalid, ignored\n", i);
+ continue;
+ }
+ if (!create_dev)
+ continue;
+
+ result = acpi_bus_get_device(trt->source, &adev);
+ if (!result)
+ acpi_create_platform_device(adev);
+ else
+ pr_warn("Failed to get source ACPI device\n");
+
+ result = acpi_bus_get_device(trt->target, &adev);
+ if (!result)
+ acpi_create_platform_device(adev);
+ else
+ pr_warn("Failed to get target ACPI device\n");
+ }
+
+ *trtp = trts;
+ /* don't count bad entries */
+ *trt_count -= nr_bad_entries;
+end:
+ kfree(buffer.pointer);
+ return result;
+}
+EXPORT_SYMBOL(acpi_parse_trt);
+
+/**
+ * acpi_parse_art - Parse Active Relationship Table _ART
+ *
+ * @handle: ACPI handle of the device contains _ART
+ * @art_count: the number of valid entries resulted from parsing _ART
+ * @artp: pointer to pointer of array of art entries in parsing result
+ * @create_dev: whether to create platform devices for target and source
+ *
+ */
+int acpi_parse_art(acpi_handle handle, int *art_count, struct art **artp,
+ bool create_dev)
+{
+ acpi_status status;
+ int result = 0;
+ int i;
+ int nr_bad_entries = 0;
+ struct art *arts;
+ struct acpi_device *adev;
+ union acpi_object *p;
+ struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
+ struct acpi_buffer element = { 0, NULL };
+ struct acpi_buffer art_format = {
+ sizeof("RRNNNNNNNNNNN"), "RRNNNNNNNNNNN" };
+
+ if (!acpi_has_method(handle, "_ART"))
+ return 0;
+
+ status = acpi_evaluate_object(handle, "_ART", NULL, &buffer);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ p = buffer.pointer;
+ if (!p || (p->type != ACPI_TYPE_PACKAGE)) {
+ pr_err("Invalid _ART data\n");
+ result = -EFAULT;
+ goto end;
+ }
+
+ /* ignore p->package.elements[0], as this is _ART Revision field */
+ *art_count = p->package.count - 1;
+ arts = kzalloc(*art_count * sizeof(struct art), GFP_KERNEL);
+ if (!arts) {
+ result = -ENOMEM;
+ goto end;
+ }
+
+ for (i = 0; i < *art_count; i++) {
+ struct art *art = &arts[i - nr_bad_entries];
+
+ element.length = sizeof(struct art);
+ element.pointer = art;
+
+ status = acpi_extract_package(&(p->package.elements[i + 1]),
+ &art_format, &element);
+ if (ACPI_FAILURE(status)) {
+ pr_warn("_ART package %d is invalid, ignored", i);
+ nr_bad_entries++;
+ continue;
+ }
+ if (!create_dev)
+ continue;
+
+ if (art->source) {
+ result = acpi_bus_get_device(art->source, &adev);
+ if (!result)
+ acpi_create_platform_device(adev);
+ else
+ pr_warn("Failed to get source ACPI device\n");
+ }
+ if (art->target) {
+ result = acpi_bus_get_device(art->target, &adev);
+ if (!result)
+ acpi_create_platform_device(adev);
+ else
+ pr_warn("Failed to get source ACPI device\n");
+ }
+ }
+
+ *artp = arts;
+ /* don't count bad entries */
+ *art_count -= nr_bad_entries;
+end:
+ kfree(buffer.pointer);
+ return result;
+}
+EXPORT_SYMBOL(acpi_parse_art);
+
+
+/* get device name from acpi handle */
+static void get_single_name(acpi_handle handle, char *name)
+{
+ struct acpi_buffer buffer = {ACPI_ALLOCATE_BUFFER};
+
+ if (ACPI_FAILURE(acpi_get_name(handle, ACPI_SINGLE_NAME, &buffer)))
+ pr_warn("Failed get name from handle\n");
+ else {
+ memcpy(name, buffer.pointer, ACPI_NAME_SIZE);
+ kfree(buffer.pointer);
+ }
+}
+
+static int fill_art(char __user *ubuf)
+{
+ int i;
+ int ret;
+ int count;
+ int art_len;
+ struct art *arts = NULL;
+ union art_object *art_user;
+
+ ret = acpi_parse_art(acpi_thermal_rel_handle, &count, &arts, false);
+ if (ret)
+ goto free_art;
+ art_len = count * sizeof(union art_object);
+ art_user = kzalloc(art_len, GFP_KERNEL);
+ if (!art_user) {
+ ret = -ENOMEM;
+ goto free_art;
+ }
+ /* now fill in user art data */
+ for (i = 0; i < count; i++) {
+ /* userspace art needs device name instead of acpi reference */
+ get_single_name(arts[i].source, art_user[i].source_device);
+ get_single_name(arts[i].target, art_user[i].target_device);
+ /* copy the rest int data in addition to source and target */
+ memcpy(&art_user[i].weight, &arts[i].weight,
+ sizeof(u64) * (ACPI_NR_ART_ELEMENTS - 2));
+ }
+
+ if (copy_to_user(ubuf, art_user, art_len))
+ ret = -EFAULT;
+ kfree(art_user);
+free_art:
+ kfree(arts);
+ return ret;
+}
+
+static int fill_trt(char __user *ubuf)
+{
+ int i;
+ int ret;
+ int count;
+ int trt_len;
+ struct trt *trts = NULL;
+ union trt_object *trt_user;
+
+ ret = acpi_parse_trt(acpi_thermal_rel_handle, &count, &trts, false);
+ if (ret)
+ goto free_trt;
+ trt_len = count * sizeof(union trt_object);
+ trt_user = kzalloc(trt_len, GFP_KERNEL);
+ if (!trt_user) {
+ ret = -ENOMEM;
+ goto free_trt;
+ }
+ /* now fill in user trt data */
+ for (i = 0; i < count; i++) {
+ /* userspace trt needs device name instead of acpi reference */
+ get_single_name(trts[i].source, trt_user[i].source_device);
+ get_single_name(trts[i].target, trt_user[i].target_device);
+ trt_user[i].sample_period = trts[i].sample_period;
+ trt_user[i].influence = trts[i].influence;
+ }
+
+ if (copy_to_user(ubuf, trt_user, trt_len))
+ ret = -EFAULT;
+ kfree(trt_user);
+free_trt:
+ kfree(trts);
+ return ret;
+}
+
+static long acpi_thermal_rel_ioctl(struct file *f, unsigned int cmd,
+ unsigned long __arg)
+{
+ int ret = 0;
+ unsigned long length = 0;
+ unsigned long count = 0;
+ char __user *arg = (void __user *)__arg;
+ struct trt *trts;
+ struct art *arts;
+
+ switch (cmd) {
+ case ACPI_THERMAL_GET_TRT_COUNT:
+ ret = acpi_parse_trt(acpi_thermal_rel_handle, (int *)&count,
+ &trts, false);
+ kfree(trts);
+ if (!ret)
+ return put_user(count, (unsigned long __user *)__arg);
+ return ret;
+ case ACPI_THERMAL_GET_TRT_LEN:
+ ret = acpi_parse_trt(acpi_thermal_rel_handle, (int *)&count,
+ &trts, false);
+ kfree(trts);
+ length = count * sizeof(union trt_object);
+ if (!ret)
+ return put_user(length, (unsigned long __user *)__arg);
+ return ret;
+ case ACPI_THERMAL_GET_TRT:
+ return fill_trt(arg);
+ case ACPI_THERMAL_GET_ART_COUNT:
+ ret = acpi_parse_art(acpi_thermal_rel_handle, (int *)&count,
+ &arts, false);
+ kfree(arts);
+ if (!ret)
+ return put_user(count, (unsigned long __user *)__arg);
+ return ret;
+ case ACPI_THERMAL_GET_ART_LEN:
+ ret = acpi_parse_art(acpi_thermal_rel_handle, (int *)&count,
+ &arts, false);
+ kfree(arts);
+ length = count * sizeof(union art_object);
+ if (!ret)
+ return put_user(length, (unsigned long __user *)__arg);
+ return ret;
+
+ case ACPI_THERMAL_GET_ART:
+ return fill_art(arg);
+
+ default:
+ return -ENOTTY;
+ }
+}
+
+static const struct file_operations acpi_thermal_rel_fops = {
+ .owner = THIS_MODULE,
+ .open = acpi_thermal_rel_open,
+ .release = acpi_thermal_rel_release,
+ .unlocked_ioctl = acpi_thermal_rel_ioctl,
+ .llseek = no_llseek,
+};
+
+static struct miscdevice acpi_thermal_rel_misc_device = {
+ .minor = MISC_DYNAMIC_MINOR,
+ "acpi_thermal_rel",
+ &acpi_thermal_rel_fops
+};
+
+int acpi_thermal_rel_misc_device_add(acpi_handle handle)
+{
+ acpi_thermal_rel_handle = handle;
+
+ return misc_register(&acpi_thermal_rel_misc_device);
+}
+EXPORT_SYMBOL(acpi_thermal_rel_misc_device_add);
+
+int acpi_thermal_rel_misc_device_remove(acpi_handle handle)
+{
+ misc_deregister(&acpi_thermal_rel_misc_device);
+
+ return 0;
+}
+EXPORT_SYMBOL(acpi_thermal_rel_misc_device_remove);
+
+MODULE_AUTHOR("Zhang Rui <rui.zhang@intel.com>");
+MODULE_AUTHOR("Jacob Pan <jacob.jun.pan@intel.com");
+MODULE_DESCRIPTION("Intel acpi thermal rel misc dev driver");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+#ifndef __ACPI_ACPI_THERMAL_H
+#define __ACPI_ACPI_THERMAL_H
+
+#include <asm/ioctl.h>
+
+#define ACPI_THERMAL_MAGIC 's'
+
+#define ACPI_THERMAL_GET_TRT_LEN _IOR(ACPI_THERMAL_MAGIC, 1, unsigned long)
+#define ACPI_THERMAL_GET_ART_LEN _IOR(ACPI_THERMAL_MAGIC, 2, unsigned long)
+#define ACPI_THERMAL_GET_TRT_COUNT _IOR(ACPI_THERMAL_MAGIC, 3, unsigned long)
+#define ACPI_THERMAL_GET_ART_COUNT _IOR(ACPI_THERMAL_MAGIC, 4, unsigned long)
+
+#define ACPI_THERMAL_GET_TRT _IOR(ACPI_THERMAL_MAGIC, 5, unsigned long)
+#define ACPI_THERMAL_GET_ART _IOR(ACPI_THERMAL_MAGIC, 6, unsigned long)
+
+struct art {
+ acpi_handle source;
+ acpi_handle target;
+ u64 weight;
+ u64 ac0_max;
+ u64 ac1_max;
+ u64 ac2_max;
+ u64 ac3_max;
+ u64 ac4_max;
+ u64 ac5_max;
+ u64 ac6_max;
+ u64 ac7_max;
+ u64 ac8_max;
+ u64 ac9_max;
+} __packed;
+
+struct trt {
+ acpi_handle source;
+ acpi_handle target;
+ u64 influence;
+ u64 sample_period;
+ u64 reverved1;
+ u64 reverved2;
+ u64 reverved3;
+ u64 reverved4;
+} __packed;
+
+#define ACPI_NR_ART_ELEMENTS 13
+/* for usrspace */
+union art_object {
+ struct {
+ char source_device[8]; /* ACPI single name */
+ char target_device[8]; /* ACPI single name */
+ u64 weight;
+ u64 ac0_max_level;
+ u64 ac1_max_level;
+ u64 ac2_max_level;
+ u64 ac3_max_level;
+ u64 ac4_max_level;
+ u64 ac5_max_level;
+ u64 ac6_max_level;
+ u64 ac7_max_level;
+ u64 ac8_max_level;
+ u64 ac9_max_level;
+ };
+ u64 __data[ACPI_NR_ART_ELEMENTS];
+};
+
+union trt_object {
+ struct {
+ char source_device[8]; /* ACPI single name */
+ char target_device[8]; /* ACPI single name */
+ u64 influence;
+ u64 sample_period;
+ u64 reserved[4];
+ };
+ u64 __data[8];
+};
+
+#ifdef __KERNEL__
+int acpi_thermal_rel_misc_device_add(acpi_handle handle);
+int acpi_thermal_rel_misc_device_remove(acpi_handle handle);
+int acpi_parse_art(acpi_handle handle, int *art_count, struct art **arts,
+ bool create_dev);
+int acpi_parse_trt(acpi_handle handle, int *trt_count, struct trt **trts,
+ bool create_dev);
+#endif
+
+#endif /* __ACPI_ACPI_THERMAL_H */
--- /dev/null
+/*
+ * INT3400 thermal driver
+ *
+ * Copyright (C) 2014, Intel Corporation
+ * Authors: Zhang Rui <rui.zhang@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/acpi.h>
+#include <linux/thermal.h>
+#include "acpi_thermal_rel.h"
+
+enum int3400_thermal_uuid {
+ INT3400_THERMAL_PASSIVE_1,
+ INT3400_THERMAL_PASSIVE_2,
+ INT3400_THERMAL_ACTIVE,
+ INT3400_THERMAL_CRITICAL,
+ INT3400_THERMAL_COOLING_MODE,
+ INT3400_THERMAL_MAXIMUM_UUID,
+};
+
+static u8 *int3400_thermal_uuids[INT3400_THERMAL_MAXIMUM_UUID] = {
+ "42A441D6-AE6A-462b-A84B-4A8CE79027D3",
+ "9E04115A-AE87-4D1C-9500-0F3E340BFE75",
+ "3A95C389-E4B8-4629-A526-C52C88626BAE",
+ "97C68AE7-15FA-499c-B8C9-5DA81D606E0A",
+ "16CAF1B7-DD38-40ed-B1C1-1B8A1913D531",
+};
+
+struct int3400_thermal_priv {
+ struct acpi_device *adev;
+ struct thermal_zone_device *thermal;
+ int mode;
+ int art_count;
+ struct art *arts;
+ int trt_count;
+ struct trt *trts;
+ u8 uuid_bitmap;
+ int rel_misc_dev_res;
+};
+
+static int int3400_thermal_get_uuids(struct int3400_thermal_priv *priv)
+{
+ struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL};
+ union acpi_object *obja, *objb;
+ int i, j;
+ int result = 0;
+ acpi_status status;
+
+ status = acpi_evaluate_object(priv->adev->handle, "IDSP", NULL, &buf);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ obja = (union acpi_object *)buf.pointer;
+ if (obja->type != ACPI_TYPE_PACKAGE) {
+ result = -EINVAL;
+ goto end;
+ }
+
+ for (i = 0; i < obja->package.count; i++) {
+ objb = &obja->package.elements[i];
+ if (objb->type != ACPI_TYPE_BUFFER) {
+ result = -EINVAL;
+ goto end;
+ }
+
+ /* UUID must be 16 bytes */
+ if (objb->buffer.length != 16) {
+ result = -EINVAL;
+ goto end;
+ }
+
+ for (j = 0; j < INT3400_THERMAL_MAXIMUM_UUID; j++) {
+ u8 uuid[16];
+
+ acpi_str_to_uuid(int3400_thermal_uuids[j], uuid);
+ if (!strncmp(uuid, objb->buffer.pointer, 16)) {
+ priv->uuid_bitmap |= (1 << j);
+ break;
+ }
+ }
+ }
+
+end:
+ kfree(buf.pointer);
+ return result;
+}
+
+static int int3400_thermal_run_osc(acpi_handle handle,
+ enum int3400_thermal_uuid uuid, bool enable)
+{
+ u32 ret, buf[2];
+ acpi_status status;
+ int result = 0;
+ struct acpi_osc_context context = {
+ .uuid_str = int3400_thermal_uuids[uuid],
+ .rev = 1,
+ .cap.length = 8,
+ };
+
+ buf[OSC_QUERY_DWORD] = 0;
+ buf[OSC_SUPPORT_DWORD] = enable;
+
+ context.cap.pointer = buf;
+
+ status = acpi_run_osc(handle, &context);
+ if (ACPI_SUCCESS(status)) {
+ ret = *((u32 *)(context.ret.pointer + 4));
+ if (ret != enable)
+ result = -EPERM;
+ } else
+ result = -EPERM;
+
+ kfree(context.ret.pointer);
+ return result;
+}
+
+static int int3400_thermal_get_temp(struct thermal_zone_device *thermal,
+ unsigned long *temp)
+{
+ *temp = 20 * 1000; /* faked temp sensor with 20C */
+ return 0;
+}
+
+static int int3400_thermal_get_mode(struct thermal_zone_device *thermal,
+ enum thermal_device_mode *mode)
+{
+ struct int3400_thermal_priv *priv = thermal->devdata;
+
+ if (!priv)
+ return -EINVAL;
+
+ *mode = priv->mode;
+
+ return 0;
+}
+
+static int int3400_thermal_set_mode(struct thermal_zone_device *thermal,
+ enum thermal_device_mode mode)
+{
+ struct int3400_thermal_priv *priv = thermal->devdata;
+ bool enable;
+ int result = 0;
+
+ if (!priv)
+ return -EINVAL;
+
+ if (mode == THERMAL_DEVICE_ENABLED)
+ enable = true;
+ else if (mode == THERMAL_DEVICE_DISABLED)
+ enable = false;
+ else
+ return -EINVAL;
+
+ if (enable != priv->mode) {
+ priv->mode = enable;
+ /* currently, only PASSIVE COOLING is supported */
+ result = int3400_thermal_run_osc(priv->adev->handle,
+ INT3400_THERMAL_PASSIVE_1, enable);
+ }
+ return result;
+}
+
+static struct thermal_zone_device_ops int3400_thermal_ops = {
+ .get_temp = int3400_thermal_get_temp,
+};
+
+static struct thermal_zone_params int3400_thermal_params = {
+ .governor_name = "user_space",
+ .no_hwmon = true,
+};
+
+static int int3400_thermal_probe(struct platform_device *pdev)
+{
+ struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+ struct int3400_thermal_priv *priv;
+ int result;
+
+ if (!adev)
+ return -ENODEV;
+
+ priv = kzalloc(sizeof(struct int3400_thermal_priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->adev = adev;
+
+ result = int3400_thermal_get_uuids(priv);
+ if (result)
+ goto free_priv;
+
+ result = acpi_parse_art(priv->adev->handle, &priv->art_count,
+ &priv->arts, true);
+ if (result)
+ goto free_priv;
+
+
+ result = acpi_parse_trt(priv->adev->handle, &priv->trt_count,
+ &priv->trts, true);
+ if (result)
+ goto free_art;
+
+ platform_set_drvdata(pdev, priv);
+
+ if (priv->uuid_bitmap & 1 << INT3400_THERMAL_PASSIVE_1) {
+ int3400_thermal_ops.get_mode = int3400_thermal_get_mode;
+ int3400_thermal_ops.set_mode = int3400_thermal_set_mode;
+ }
+ priv->thermal = thermal_zone_device_register("INT3400 Thermal", 0, 0,
+ priv, &int3400_thermal_ops,
+ &int3400_thermal_params, 0, 0);
+ if (IS_ERR(priv->thermal)) {
+ result = PTR_ERR(priv->thermal);
+ goto free_trt;
+ }
+
+ priv->rel_misc_dev_res = acpi_thermal_rel_misc_device_add(
+ priv->adev->handle);
+
+ return 0;
+free_trt:
+ kfree(priv->trts);
+free_art:
+ kfree(priv->arts);
+free_priv:
+ kfree(priv);
+ return result;
+}
+
+static int int3400_thermal_remove(struct platform_device *pdev)
+{
+ struct int3400_thermal_priv *priv = platform_get_drvdata(pdev);
+
+ if (!priv->rel_misc_dev_res)
+ acpi_thermal_rel_misc_device_remove(priv->adev->handle);
+
+ thermal_zone_device_unregister(priv->thermal);
+ kfree(priv->trts);
+ kfree(priv->arts);
+ kfree(priv);
+ return 0;
+}
+
+static const struct acpi_device_id int3400_thermal_match[] = {
+ {"INT3400", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(acpi, int3400_thermal_match);
+
+static struct platform_driver int3400_thermal_driver = {
+ .probe = int3400_thermal_probe,
+ .remove = int3400_thermal_remove,
+ .driver = {
+ .name = "int3400 thermal",
+ .owner = THIS_MODULE,
+ .acpi_match_table = ACPI_PTR(int3400_thermal_match),
+ },
+};
+
+module_platform_driver(int3400_thermal_driver);
+
+MODULE_DESCRIPTION("INT3400 Thermal driver");
+MODULE_AUTHOR("Zhang Rui <rui.zhang@intel.com>");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * INT3402 thermal driver for memory temperature reporting
+ *
+ * Copyright (C) 2014, Intel Corporation
+ * Authors: Aaron Lu <aaron.lu@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/acpi.h>
+#include <linux/thermal.h>
+
+#define ACPI_ACTIVE_COOLING_MAX_NR 10
+
+struct active_trip {
+ unsigned long temp;
+ int id;
+ bool valid;
+};
+
+struct int3402_thermal_data {
+ unsigned long *aux_trips;
+ int aux_trip_nr;
+ unsigned long psv_temp;
+ int psv_trip_id;
+ unsigned long crt_temp;
+ int crt_trip_id;
+ unsigned long hot_temp;
+ int hot_trip_id;
+ struct active_trip act_trips[ACPI_ACTIVE_COOLING_MAX_NR];
+ acpi_handle *handle;
+};
+
+static int int3402_thermal_get_zone_temp(struct thermal_zone_device *zone,
+ unsigned long *temp)
+{
+ struct int3402_thermal_data *d = zone->devdata;
+ unsigned long long tmp;
+ acpi_status status;
+
+ status = acpi_evaluate_integer(d->handle, "_TMP", NULL, &tmp);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ /* _TMP returns the temperature in tenths of degrees Kelvin */
+ *temp = DECI_KELVIN_TO_MILLICELSIUS(tmp);
+
+ return 0;
+}
+
+static int int3402_thermal_get_trip_temp(struct thermal_zone_device *zone,
+ int trip, unsigned long *temp)
+{
+ struct int3402_thermal_data *d = zone->devdata;
+ int i;
+
+ if (trip < d->aux_trip_nr)
+ *temp = d->aux_trips[trip];
+ else if (trip == d->crt_trip_id)
+ *temp = d->crt_temp;
+ else if (trip == d->psv_trip_id)
+ *temp = d->psv_temp;
+ else if (trip == d->hot_trip_id)
+ *temp = d->hot_temp;
+ else {
+ for (i = 0; i < ACPI_ACTIVE_COOLING_MAX_NR; i++) {
+ if (d->act_trips[i].valid &&
+ d->act_trips[i].id == trip) {
+ *temp = d->act_trips[i].temp;
+ break;
+ }
+ }
+ if (i == ACPI_ACTIVE_COOLING_MAX_NR)
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int int3402_thermal_get_trip_type(struct thermal_zone_device *zone,
+ int trip, enum thermal_trip_type *type)
+{
+ struct int3402_thermal_data *d = zone->devdata;
+ int i;
+
+ if (trip < d->aux_trip_nr)
+ *type = THERMAL_TRIP_PASSIVE;
+ else if (trip == d->crt_trip_id)
+ *type = THERMAL_TRIP_CRITICAL;
+ else if (trip == d->hot_trip_id)
+ *type = THERMAL_TRIP_HOT;
+ else if (trip == d->psv_trip_id)
+ *type = THERMAL_TRIP_PASSIVE;
+ else {
+ for (i = 0; i < ACPI_ACTIVE_COOLING_MAX_NR; i++) {
+ if (d->act_trips[i].valid &&
+ d->act_trips[i].id == trip) {
+ *type = THERMAL_TRIP_ACTIVE;
+ break;
+ }
+ }
+ if (i == ACPI_ACTIVE_COOLING_MAX_NR)
+ return -EINVAL;
+ }
+ return 0;
+}
+
+static int int3402_thermal_set_trip_temp(struct thermal_zone_device *zone, int trip,
+ unsigned long temp)
+{
+ struct int3402_thermal_data *d = zone->devdata;
+ acpi_status status;
+ char name[10];
+
+ snprintf(name, sizeof(name), "PAT%d", trip);
+ status = acpi_execute_simple_method(d->handle, name,
+ MILLICELSIUS_TO_DECI_KELVIN(temp));
+ if (ACPI_FAILURE(status))
+ return -EIO;
+
+ d->aux_trips[trip] = temp;
+ return 0;
+}
+
+static struct thermal_zone_device_ops int3402_thermal_zone_ops = {
+ .get_temp = int3402_thermal_get_zone_temp,
+ .get_trip_temp = int3402_thermal_get_trip_temp,
+ .get_trip_type = int3402_thermal_get_trip_type,
+ .set_trip_temp = int3402_thermal_set_trip_temp,
+};
+
+static struct thermal_zone_params int3402_thermal_params = {
+ .governor_name = "user_space",
+ .no_hwmon = true,
+};
+
+static int int3402_thermal_get_temp(acpi_handle handle, char *name,
+ unsigned long *temp)
+{
+ unsigned long long r;
+ acpi_status status;
+
+ status = acpi_evaluate_integer(handle, name, NULL, &r);
+ if (ACPI_FAILURE(status))
+ return -EIO;
+
+ *temp = DECI_KELVIN_TO_MILLICELSIUS(r);
+ return 0;
+}
+
+static int int3402_thermal_probe(struct platform_device *pdev)
+{
+ struct acpi_device *adev = ACPI_COMPANION(&pdev->dev);
+ struct int3402_thermal_data *d;
+ struct thermal_zone_device *zone;
+ acpi_status status;
+ unsigned long long trip_cnt;
+ int trip_mask = 0, i;
+
+ if (!acpi_has_method(adev->handle, "_TMP"))
+ return -ENODEV;
+
+ d = devm_kzalloc(&pdev->dev, sizeof(*d), GFP_KERNEL);
+ if (!d)
+ return -ENOMEM;
+
+ status = acpi_evaluate_integer(adev->handle, "PATC", NULL, &trip_cnt);
+ if (ACPI_FAILURE(status))
+ trip_cnt = 0;
+ else {
+ d->aux_trips = devm_kzalloc(&pdev->dev,
+ sizeof(*d->aux_trips) * trip_cnt, GFP_KERNEL);
+ if (!d->aux_trips)
+ return -ENOMEM;
+ trip_mask = trip_cnt - 1;
+ d->handle = adev->handle;
+ d->aux_trip_nr = trip_cnt;
+ }
+
+ d->crt_trip_id = -1;
+ if (!int3402_thermal_get_temp(adev->handle, "_CRT", &d->crt_temp))
+ d->crt_trip_id = trip_cnt++;
+ d->hot_trip_id = -1;
+ if (!int3402_thermal_get_temp(adev->handle, "_HOT", &d->hot_temp))
+ d->hot_trip_id = trip_cnt++;
+ d->psv_trip_id = -1;
+ if (!int3402_thermal_get_temp(adev->handle, "_PSV", &d->psv_temp))
+ d->psv_trip_id = trip_cnt++;
+ for (i = 0; i < ACPI_ACTIVE_COOLING_MAX_NR; i++) {
+ char name[5] = { '_', 'A', 'C', '0' + i, '\0' };
+ if (int3402_thermal_get_temp(adev->handle, name,
+ &d->act_trips[i].temp))
+ break;
+ d->act_trips[i].id = trip_cnt++;
+ d->act_trips[i].valid = true;
+ }
+
+ zone = thermal_zone_device_register(acpi_device_bid(adev), trip_cnt,
+ trip_mask, d,
+ &int3402_thermal_zone_ops,
+ &int3402_thermal_params,
+ 0, 0);
+ if (IS_ERR(zone))
+ return PTR_ERR(zone);
+ platform_set_drvdata(pdev, zone);
+
+ return 0;
+}
+
+static int int3402_thermal_remove(struct platform_device *pdev)
+{
+ struct thermal_zone_device *zone = platform_get_drvdata(pdev);
+
+ thermal_zone_device_unregister(zone);
+ return 0;
+}
+
+static const struct acpi_device_id int3402_thermal_match[] = {
+ {"INT3402", 0},
+ {}
+};
+
+MODULE_DEVICE_TABLE(acpi, int3402_thermal_match);
+
+static struct platform_driver int3402_thermal_driver = {
+ .probe = int3402_thermal_probe,
+ .remove = int3402_thermal_remove,
+ .driver = {
+ .name = "int3402 thermal",
+ .owner = THIS_MODULE,
+ .acpi_match_table = int3402_thermal_match,
+ },
+};
+
+module_platform_driver(int3402_thermal_driver);
+
+MODULE_DESCRIPTION("INT3402 Thermal driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * ACPI INT3403 thermal driver
+ * Copyright (c) 2013, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/types.h>
+#include <linux/acpi.h>
+#include <linux/thermal.h>
+#include <linux/platform_device.h>
+
+#define INT3403_TYPE_SENSOR 0x03
+#define INT3403_TYPE_CHARGER 0x0B
+#define INT3403_TYPE_BATTERY 0x0C
+#define INT3403_PERF_CHANGED_EVENT 0x80
+#define INT3403_THERMAL_EVENT 0x90
+
+#define DECI_KELVIN_TO_MILLI_CELSIUS(t, off) (((t) - (off)) * 100)
+#define KELVIN_OFFSET 2732
+#define MILLI_CELSIUS_TO_DECI_KELVIN(t, off) (((t) / 100) + (off))
+
+struct int3403_sensor {
+ struct thermal_zone_device *tzone;
+ unsigned long *thresholds;
+ unsigned long crit_temp;
+ int crit_trip_id;
+ unsigned long psv_temp;
+ int psv_trip_id;
+
+};
+
+struct int3403_performance_state {
+ u64 performance;
+ u64 power;
+ u64 latency;
+ u64 linear;
+ u64 control;
+ u64 raw_performace;
+ char *raw_unit;
+ int reserved;
+};
+
+struct int3403_cdev {
+ struct thermal_cooling_device *cdev;
+ unsigned long max_state;
+};
+
+struct int3403_priv {
+ struct platform_device *pdev;
+ struct acpi_device *adev;
+ unsigned long long type;
+ void *priv;
+};
+
+static int sys_get_curr_temp(struct thermal_zone_device *tzone,
+ unsigned long *temp)
+{
+ struct int3403_priv *priv = tzone->devdata;
+ struct acpi_device *device = priv->adev;
+ unsigned long long tmp;
+ acpi_status status;
+
+ status = acpi_evaluate_integer(device->handle, "_TMP", NULL, &tmp);
+ if (ACPI_FAILURE(status))
+ return -EIO;
+
+ *temp = DECI_KELVIN_TO_MILLI_CELSIUS(tmp, KELVIN_OFFSET);
+
+ return 0;
+}
+
+static int sys_get_trip_hyst(struct thermal_zone_device *tzone,
+ int trip, unsigned long *temp)
+{
+ struct int3403_priv *priv = tzone->devdata;
+ struct acpi_device *device = priv->adev;
+ unsigned long long hyst;
+ acpi_status status;
+
+ status = acpi_evaluate_integer(device->handle, "GTSH", NULL, &hyst);
+ if (ACPI_FAILURE(status))
+ return -EIO;
+
+ /*
+ * Thermal hysteresis represents a temperature difference.
+ * Kelvin and Celsius have same degree size. So the
+ * conversion here between tenths of degree Kelvin unit
+ * and Milli-Celsius unit is just to multiply 100.
+ */
+ *temp = hyst * 100;
+
+ return 0;
+}
+
+static int sys_get_trip_temp(struct thermal_zone_device *tzone,
+ int trip, unsigned long *temp)
+{
+ struct int3403_priv *priv = tzone->devdata;
+ struct int3403_sensor *obj = priv->priv;
+
+ if (priv->type != INT3403_TYPE_SENSOR || !obj)
+ return -EINVAL;
+
+ if (trip == obj->crit_trip_id)
+ *temp = obj->crit_temp;
+ else if (trip == obj->psv_trip_id)
+ *temp = obj->psv_temp;
+ else {
+ /*
+ * get_trip_temp is a mandatory callback but
+ * PATx method doesn't return any value, so return
+ * cached value, which was last set from user space
+ */
+ *temp = obj->thresholds[trip];
+ }
+
+ return 0;
+}
+
+static int sys_get_trip_type(struct thermal_zone_device *thermal,
+ int trip, enum thermal_trip_type *type)
+{
+ struct int3403_priv *priv = thermal->devdata;
+ struct int3403_sensor *obj = priv->priv;
+
+ /* Mandatory callback, may not mean much here */
+ if (trip == obj->crit_trip_id)
+ *type = THERMAL_TRIP_CRITICAL;
+ else
+ *type = THERMAL_TRIP_PASSIVE;
+
+ return 0;
+}
+
+int sys_set_trip_temp(struct thermal_zone_device *tzone, int trip,
+ unsigned long temp)
+{
+ struct int3403_priv *priv = tzone->devdata;
+ struct acpi_device *device = priv->adev;
+ struct int3403_sensor *obj = priv->priv;
+ acpi_status status;
+ char name[10];
+ int ret = 0;
+
+ snprintf(name, sizeof(name), "PAT%d", trip);
+ if (acpi_has_method(device->handle, name)) {
+ status = acpi_execute_simple_method(device->handle, name,
+ MILLI_CELSIUS_TO_DECI_KELVIN(temp,
+ KELVIN_OFFSET));
+ if (ACPI_FAILURE(status))
+ ret = -EIO;
+ else
+ obj->thresholds[trip] = temp;
+ } else {
+ ret = -EIO;
+ dev_err(&device->dev, "sys_set_trip_temp: method not found\n");
+ }
+
+ return ret;
+}
+
+static struct thermal_zone_device_ops tzone_ops = {
+ .get_temp = sys_get_curr_temp,
+ .get_trip_temp = sys_get_trip_temp,
+ .get_trip_type = sys_get_trip_type,
+ .set_trip_temp = sys_set_trip_temp,
+ .get_trip_hyst = sys_get_trip_hyst,
+};
+
+static struct thermal_zone_params int3403_thermal_params = {
+ .governor_name = "user_space",
+ .no_hwmon = true,
+};
+
+static void int3403_notify(acpi_handle handle,
+ u32 event, void *data)
+{
+ struct int3403_priv *priv = data;
+ struct int3403_sensor *obj;
+
+ if (!priv)
+ return;
+
+ obj = priv->priv;
+ if (priv->type != INT3403_TYPE_SENSOR || !obj)
+ return;
+
+ switch (event) {
+ case INT3403_PERF_CHANGED_EVENT:
+ break;
+ case INT3403_THERMAL_EVENT:
+ thermal_zone_device_update(obj->tzone);
+ break;
+ default:
+ dev_err(&priv->pdev->dev, "Unsupported event [0x%x]\n", event);
+ break;
+ }
+}
+
+static int sys_get_trip_crt(struct acpi_device *device, unsigned long *temp)
+{
+ unsigned long long crt;
+ acpi_status status;
+
+ status = acpi_evaluate_integer(device->handle, "_CRT", NULL, &crt);
+ if (ACPI_FAILURE(status))
+ return -EIO;
+
+ *temp = DECI_KELVIN_TO_MILLI_CELSIUS(crt, KELVIN_OFFSET);
+
+ return 0;
+}
+
+static int sys_get_trip_psv(struct acpi_device *device, unsigned long *temp)
+{
+ unsigned long long psv;
+ acpi_status status;
+
+ status = acpi_evaluate_integer(device->handle, "_PSV", NULL, &psv);
+ if (ACPI_FAILURE(status))
+ return -EIO;
+
+ *temp = DECI_KELVIN_TO_MILLI_CELSIUS(psv, KELVIN_OFFSET);
+
+ return 0;
+}
+
+static int int3403_sensor_add(struct int3403_priv *priv)
+{
+ int result = 0;
+ acpi_status status;
+ struct int3403_sensor *obj;
+ unsigned long long trip_cnt;
+ int trip_mask = 0;
+
+ obj = devm_kzalloc(&priv->pdev->dev, sizeof(*obj), GFP_KERNEL);
+ if (!obj)
+ return -ENOMEM;
+
+ priv->priv = obj;
+
+ status = acpi_evaluate_integer(priv->adev->handle, "PATC", NULL,
+ &trip_cnt);
+ if (ACPI_FAILURE(status))
+ trip_cnt = 0;
+
+ if (trip_cnt) {
+ /* We have to cache, thresholds can't be readback */
+ obj->thresholds = devm_kzalloc(&priv->pdev->dev,
+ sizeof(*obj->thresholds) * trip_cnt,
+ GFP_KERNEL);
+ if (!obj->thresholds) {
+ result = -ENOMEM;
+ goto err_free_obj;
+ }
+ trip_mask = BIT(trip_cnt) - 1;
+ }
+
+ obj->psv_trip_id = -1;
+ if (!sys_get_trip_psv(priv->adev, &obj->psv_temp))
+ obj->psv_trip_id = trip_cnt++;
+
+ obj->crit_trip_id = -1;
+ if (!sys_get_trip_crt(priv->adev, &obj->crit_temp))
+ obj->crit_trip_id = trip_cnt++;
+
+ obj->tzone = thermal_zone_device_register(acpi_device_bid(priv->adev),
+ trip_cnt, trip_mask, priv, &tzone_ops,
+ &int3403_thermal_params, 0, 0);
+ if (IS_ERR(obj->tzone)) {
+ result = PTR_ERR(obj->tzone);
+ obj->tzone = NULL;
+ goto err_free_obj;
+ }
+
+ result = acpi_install_notify_handler(priv->adev->handle,
+ ACPI_DEVICE_NOTIFY, int3403_notify,
+ (void *)priv);
+ if (result)
+ goto err_free_obj;
+
+ return 0;
+
+ err_free_obj:
+ if (obj->tzone)
+ thermal_zone_device_unregister(obj->tzone);
+ return result;
+}
+
+static int int3403_sensor_remove(struct int3403_priv *priv)
+{
+ struct int3403_sensor *obj = priv->priv;
+
+ thermal_zone_device_unregister(obj->tzone);
+ return 0;
+}
+
+/* INT3403 Cooling devices */
+static int int3403_get_max_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ struct int3403_priv *priv = cdev->devdata;
+ struct int3403_cdev *obj = priv->priv;
+
+ *state = obj->max_state;
+ return 0;
+}
+
+static int int3403_get_cur_state(struct thermal_cooling_device *cdev,
+ unsigned long *state)
+{
+ struct int3403_priv *priv = cdev->devdata;
+ unsigned long long level;
+ acpi_status status;
+
+ status = acpi_evaluate_integer(priv->adev->handle, "PPPC", NULL, &level);
+ if (ACPI_SUCCESS(status)) {
+ *state = level;
+ return 0;
+ } else
+ return -EINVAL;
+}
+
+static int
+int3403_set_cur_state(struct thermal_cooling_device *cdev, unsigned long state)
+{
+ struct int3403_priv *priv = cdev->devdata;
+ acpi_status status;
+
+ status = acpi_execute_simple_method(priv->adev->handle, "SPPC", state);
+ if (ACPI_SUCCESS(status))
+ return 0;
+ else
+ return -EINVAL;
+}
+
+static const struct thermal_cooling_device_ops int3403_cooling_ops = {
+ .get_max_state = int3403_get_max_state,
+ .get_cur_state = int3403_get_cur_state,
+ .set_cur_state = int3403_set_cur_state,
+};
+
+static int int3403_cdev_add(struct int3403_priv *priv)
+{
+ int result = 0;
+ acpi_status status;
+ struct int3403_cdev *obj;
+ struct acpi_buffer buf = { ACPI_ALLOCATE_BUFFER, NULL };
+ union acpi_object *p;
+
+ obj = devm_kzalloc(&priv->pdev->dev, sizeof(*obj), GFP_KERNEL);
+ if (!obj)
+ return -ENOMEM;
+
+ status = acpi_evaluate_object(priv->adev->handle, "PPSS", NULL, &buf);
+ if (ACPI_FAILURE(status))
+ return -ENODEV;
+
+ p = buf.pointer;
+ if (!p || (p->type != ACPI_TYPE_PACKAGE)) {
+ printk(KERN_WARNING "Invalid PPSS data\n");
+ return -EFAULT;
+ }
+
+ obj->max_state = p->package.count - 1;
+ obj->cdev =
+ thermal_cooling_device_register(acpi_device_bid(priv->adev),
+ priv, &int3403_cooling_ops);
+ if (IS_ERR(obj->cdev))
+ result = PTR_ERR(obj->cdev);
+
+ priv->priv = obj;
+
+ /* TODO: add ACPI notification support */
+
+ return result;
+}
+
+static int int3403_cdev_remove(struct int3403_priv *priv)
+{
+ struct int3403_cdev *obj = priv->priv;
+
+ thermal_cooling_device_unregister(obj->cdev);
+ return 0;
+}
+
+static int int3403_add(struct platform_device *pdev)
+{
+ struct int3403_priv *priv;
+ int result = 0;
+ acpi_status status;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(struct int3403_priv),
+ GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->pdev = pdev;
+ priv->adev = ACPI_COMPANION(&(pdev->dev));
+ if (!priv->adev) {
+ result = -EINVAL;
+ goto err;
+ }
+
+ status = acpi_evaluate_integer(priv->adev->handle, "PTYP",
+ NULL, &priv->type);
+ if (ACPI_FAILURE(status)) {
+ result = -EINVAL;
+ goto err;
+ }
+
+ platform_set_drvdata(pdev, priv);
+ switch (priv->type) {
+ case INT3403_TYPE_SENSOR:
+ result = int3403_sensor_add(priv);
+ break;
+ case INT3403_TYPE_CHARGER:
+ case INT3403_TYPE_BATTERY:
+ result = int3403_cdev_add(priv);
+ break;
+ default:
+ result = -EINVAL;
+ }
+
+ if (result)
+ goto err;
+ return result;
+
+err:
+ return result;
+}
+
+static int int3403_remove(struct platform_device *pdev)
+{
+ struct int3403_priv *priv = platform_get_drvdata(pdev);
+
+ switch (priv->type) {
+ case INT3403_TYPE_SENSOR:
+ int3403_sensor_remove(priv);
+ break;
+ case INT3403_TYPE_CHARGER:
+ case INT3403_TYPE_BATTERY:
+ int3403_cdev_remove(priv);
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static const struct acpi_device_id int3403_device_ids[] = {
+ {"INT3403", 0},
+ {"", 0},
+};
+MODULE_DEVICE_TABLE(acpi, int3403_device_ids);
+
+static struct platform_driver int3403_driver = {
+ .probe = int3403_add,
+ .remove = int3403_remove,
+ .driver = {
+ .name = "int3403 thermal",
+ .owner = THIS_MODULE,
+ .acpi_match_table = int3403_device_ids,
+ },
+};
+
+module_platform_driver(int3403_driver);
+
+MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_DESCRIPTION("ACPI INT3403 thermal driver");
int (*get_trend)(void *, long *))
{
struct device_node *np, *child, *sensor_np;
+ struct thermal_zone_device *tzd = ERR_PTR(-ENODEV);
np = of_find_node_by_name(NULL, "thermal-zones");
if (!np)
return ERR_PTR(-ENODEV);
- if (!dev || !dev->of_node)
+ if (!dev || !dev->of_node) {
+ of_node_put(np);
return ERR_PTR(-EINVAL);
+ }
- sensor_np = dev->of_node;
+ sensor_np = of_node_get(dev->of_node);
for_each_child_of_node(np, child) {
struct of_phandle_args sensor_specs;
int ret, id;
+ /* Check whether child is enabled or not */
+ if (!of_device_is_available(child))
+ continue;
+
/* For now, thermal framework supports only 1 sensor per zone */
ret = of_parse_phandle_with_args(child, "thermal-sensors",
"#thermal-sensor-cells",
}
if (sensor_specs.np == sensor_np && id == sensor_id) {
- of_node_put(np);
- return thermal_zone_of_add_sensor(child, sensor_np,
- data,
- get_temp,
- get_trend);
+ tzd = thermal_zone_of_add_sensor(child, sensor_np,
+ data,
+ get_temp,
+ get_trend);
+ of_node_put(sensor_specs.np);
+ of_node_put(child);
+ goto exit;
}
+ of_node_put(sensor_specs.np);
}
+exit:
+ of_node_put(sensor_np);
of_node_put(np);
- return ERR_PTR(-ENODEV);
+ return tzd;
}
EXPORT_SYMBOL_GPL(thermal_zone_of_sensor_register);
/* Required for cooling map matching */
trip->np = np;
+ of_node_get(np);
return 0;
}
return tz;
free_tbps:
+ for (i = 0; i < tz->num_tbps; i++)
+ of_node_put(tz->tbps[i].cooling_device);
kfree(tz->tbps);
free_trips:
+ for (i = 0; i < tz->ntrips; i++)
+ of_node_put(tz->trips[i].np);
kfree(tz->trips);
+ of_node_put(gchild);
free_tz:
kfree(tz);
of_node_put(child);
static inline void of_thermal_free_zone(struct __thermal_zone *tz)
{
+ int i;
+
+ for (i = 0; i < tz->num_tbps; i++)
+ of_node_put(tz->tbps[i].cooling_device);
kfree(tz->tbps);
+ for (i = 0; i < tz->ntrips; i++)
+ of_node_put(tz->trips[i].np);
kfree(tz->trips);
kfree(tz);
}
struct thermal_zone_device *zone;
struct thermal_zone_params *tzp;
+ /* Check whether child is enabled or not */
+ if (!of_device_is_available(child))
+ continue;
+
tz = thermal_of_build_thermal_zone(child);
if (IS_ERR(tz)) {
pr_err("failed to build thermal zone %s: %ld\n",
/* attempting to build remaining zones still */
}
}
+ of_node_put(np);
return 0;
exit_free:
+ of_node_put(child);
+ of_node_put(np);
of_thermal_free_zone(tz);
/* no memory available, so free what we have built */
for_each_child_of_node(np, child) {
struct thermal_zone_device *zone;
+ /* Check whether child is enabled or not */
+ if (!of_device_is_available(child))
+ continue;
+
zone = thermal_zone_get_zone_by_name(child->name);
if (IS_ERR(zone))
continue;
kfree(zone->ops);
of_thermal_free_zone(zone->devdata);
}
+ of_node_put(np);
}
th_zone = sensor_conf->pzone_data;
- if (th_zone->therm_dev)
- thermal_zone_device_unregister(th_zone->therm_dev);
+ thermal_zone_device_unregister(th_zone->therm_dev);
- for (i = 0; i < th_zone->cool_dev_size; i++) {
- if (th_zone->cool_dev[i])
- cpufreq_cooling_unregister(th_zone->cool_dev[i]);
- }
+ for (i = 0; i < th_zone->cool_dev_size; ++i)
+ cpufreq_cooling_unregister(th_zone->cool_dev[i]);
dev_info(sensor_conf->dev,
"Exynos: Kernel Thermal management unregistered\n");
#define SENSOR_NAME_LEN 16
#define MAX_TRIP_COUNT 8
#define MAX_COOLING_DEVICE 4
-#define MAX_THRESHOLD_LEVS 5
+#define MAX_TRIMINFO_CTRL_REG 2
#define ACTIVE_INTERVAL 500
#define IDLE_INTERVAL 10000
struct exynos_tmu_platform_data *pdata = data->pdata;
int temp_code;
- if (pdata->cal_mode == HW_MODE)
- return temp;
-
- if (data->soc == SOC_ARCH_EXYNOS4210)
- /* temp should range between 25 and 125 */
- if (temp < 25 || temp > 125) {
- temp_code = -EINVAL;
- goto out;
- }
-
switch (pdata->cal_type) {
case TYPE_TWO_POINT_TRIMMING:
temp_code = (temp - pdata->first_point_trim) *
temp_code = temp + pdata->default_temp_offset;
break;
}
-out:
+
return temp_code;
}
struct exynos_tmu_platform_data *pdata = data->pdata;
int temp;
- if (pdata->cal_mode == HW_MODE)
- return temp_code;
-
- if (data->soc == SOC_ARCH_EXYNOS4210)
- /* temp_code should range between 75 and 175 */
- if (temp_code < 75 || temp_code > 175) {
- temp = -ENODATA;
- goto out;
- }
-
switch (pdata->cal_type) {
case TYPE_TWO_POINT_TRIMMING:
temp = (temp_code - data->temp_error1) *
temp = temp_code - pdata->default_temp_offset;
break;
}
-out:
+
return temp;
}
+static void exynos_tmu_clear_irqs(struct exynos_tmu_data *data)
+{
+ const struct exynos_tmu_registers *reg = data->pdata->registers;
+ unsigned int val_irq;
+
+ val_irq = readl(data->base + reg->tmu_intstat);
+ /*
+ * Clear the interrupts. Please note that the documentation for
+ * Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly
+ * states that INTCLEAR register has a different placing of bits
+ * responsible for FALL IRQs than INTSTAT register. Exynos5420
+ * and Exynos5440 documentation is correct (Exynos4210 doesn't
+ * support FALL IRQs at all).
+ */
+ writel(val_irq, data->base + reg->tmu_intclear);
+}
+
static int exynos_tmu_initialize(struct platform_device *pdev)
{
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct exynos_tmu_platform_data *pdata = data->pdata;
const struct exynos_tmu_registers *reg = pdata->registers;
- unsigned int status, trim_info = 0, con;
+ unsigned int status, trim_info = 0, con, ctrl;
unsigned int rising_threshold = 0, falling_threshold = 0;
- int ret = 0, threshold_code, i, trigger_levs = 0;
+ int ret = 0, threshold_code, i;
mutex_lock(&data->lock);
clk_enable(data->clk);
}
}
- if (TMU_SUPPORTS(pdata, TRIM_RELOAD))
- __raw_writel(1, data->base + reg->triminfo_ctrl);
-
- if (pdata->cal_mode == HW_MODE)
- goto skip_calib_data;
+ if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) {
+ for (i = 0; i < reg->triminfo_ctrl_count; i++) {
+ if (pdata->triminfo_reload[i]) {
+ ctrl = readl(data->base +
+ reg->triminfo_ctrl[i]);
+ ctrl |= pdata->triminfo_reload[i];
+ writel(ctrl, data->base +
+ reg->triminfo_ctrl[i]);
+ }
+ }
+ }
/* Save trimming info in order to perform calibration */
if (data->soc == SOC_ARCH_EXYNOS5440) {
trim_info = readl(data->base + reg->triminfo_data);
}
data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK;
- data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) &
+ data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) &
EXYNOS_TMU_TEMP_MASK);
if (!data->temp_error1 ||
if (!data->temp_error2)
data->temp_error2 =
- (pdata->efuse_value >> reg->triminfo_85_shift) &
+ (pdata->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) &
EXYNOS_TMU_TEMP_MASK;
-skip_calib_data:
- if (pdata->max_trigger_level > MAX_THRESHOLD_LEVS) {
- dev_err(&pdev->dev, "Invalid max trigger level\n");
- ret = -EINVAL;
- goto out;
- }
-
- for (i = 0; i < pdata->max_trigger_level; i++) {
- if (!pdata->trigger_levels[i])
- continue;
-
- if ((pdata->trigger_type[i] == HW_TRIP) &&
- (!pdata->trigger_levels[pdata->max_trigger_level - 1])) {
- dev_err(&pdev->dev, "Invalid hw trigger level\n");
- ret = -EINVAL;
- goto out;
- }
-
- /* Count trigger levels except the HW trip*/
- if (!(pdata->trigger_type[i] == HW_TRIP))
- trigger_levs++;
- }
-
rising_threshold = readl(data->base + reg->threshold_th0);
if (data->soc == SOC_ARCH_EXYNOS4210) {
/* Write temperature code for threshold */
threshold_code = temp_to_code(data, pdata->threshold);
- if (threshold_code < 0) {
- ret = threshold_code;
- goto out;
- }
writeb(threshold_code,
data->base + reg->threshold_temp);
- for (i = 0; i < trigger_levs; i++)
+ for (i = 0; i < pdata->non_hw_trigger_levels; i++)
writeb(pdata->trigger_levels[i], data->base +
reg->threshold_th0 + i * sizeof(reg->threshold_th0));
- writel(reg->intclr_rise_mask, data->base + reg->tmu_intclear);
+ exynos_tmu_clear_irqs(data);
} else {
/* Write temperature code for rising and falling threshold */
- for (i = 0;
- i < trigger_levs && i < EXYNOS_MAX_TRIGGER_PER_REG; i++) {
+ for (i = 0; i < pdata->non_hw_trigger_levels; i++) {
threshold_code = temp_to_code(data,
pdata->trigger_levels[i]);
- if (threshold_code < 0) {
- ret = threshold_code;
- goto out;
- }
rising_threshold &= ~(0xff << 8 * i);
rising_threshold |= threshold_code << 8 * i;
if (pdata->threshold_falling) {
threshold_code = temp_to_code(data,
pdata->trigger_levels[i] -
pdata->threshold_falling);
- if (threshold_code > 0)
- falling_threshold |=
- threshold_code << 8 * i;
+ falling_threshold |= threshold_code << 8 * i;
}
}
writel(falling_threshold,
data->base + reg->threshold_th1);
- writel((reg->intclr_rise_mask << reg->intclr_rise_shift) |
- (reg->intclr_fall_mask << reg->intclr_fall_shift),
- data->base + reg->tmu_intclear);
+ exynos_tmu_clear_irqs(data);
/* if last threshold limit is also present */
i = pdata->max_trigger_level - 1;
(pdata->trigger_type[i] == HW_TRIP)) {
threshold_code = temp_to_code(data,
pdata->trigger_levels[i]);
- if (threshold_code < 0) {
- ret = threshold_code;
- goto out;
- }
if (i == EXYNOS_MAX_TRIGGER_PER_REG - 1) {
/* 1-4 level to be assigned in th0 reg */
rising_threshold &= ~(0xff << 8 * i);
struct exynos_tmu_data *data = platform_get_drvdata(pdev);
struct exynos_tmu_platform_data *pdata = data->pdata;
const struct exynos_tmu_registers *reg = pdata->registers;
- unsigned int con, interrupt_en, cal_val;
+ unsigned int con, interrupt_en;
mutex_lock(&data->lock);
clk_enable(data->clk);
if (pdata->test_mux)
con |= (pdata->test_mux << reg->test_mux_addr_shift);
- if (pdata->reference_voltage) {
- con &= ~(reg->buf_vref_sel_mask << reg->buf_vref_sel_shift);
- con |= pdata->reference_voltage << reg->buf_vref_sel_shift;
- }
+ con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT);
+ con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT;
- if (pdata->gain) {
- con &= ~(reg->buf_slope_sel_mask << reg->buf_slope_sel_shift);
- con |= (pdata->gain << reg->buf_slope_sel_shift);
- }
+ con &= ~(EXYNOS_TMU_BUF_SLOPE_SEL_MASK << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
+ con |= (pdata->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT);
if (pdata->noise_cancel_mode) {
con &= ~(reg->therm_trip_mode_mask <<
con |= (pdata->noise_cancel_mode << reg->therm_trip_mode_shift);
}
- if (pdata->cal_mode == HW_MODE) {
- con &= ~(reg->calib_mode_mask << reg->calib_mode_shift);
- cal_val = 0;
- switch (pdata->cal_type) {
- case TYPE_TWO_POINT_TRIMMING:
- cal_val = 3;
- break;
- case TYPE_ONE_POINT_TRIMMING_85:
- cal_val = 2;
- break;
- case TYPE_ONE_POINT_TRIMMING_25:
- cal_val = 1;
- break;
- case TYPE_NONE:
- break;
- default:
- dev_err(&pdev->dev, "Invalid calibration type, using none\n");
- }
- con |= cal_val << reg->calib_mode_shift;
- }
-
if (on) {
- con |= (1 << reg->core_en_shift);
+ con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT);
interrupt_en =
pdata->trigger_enable[3] << reg->inten_rise3_shift |
pdata->trigger_enable[2] << reg->inten_rise2_shift |
interrupt_en |=
interrupt_en << reg->inten_fall0_shift;
} else {
- con &= ~(1 << reg->core_en_shift);
+ con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT);
interrupt_en = 0; /* Disable all interrupts */
}
writel(interrupt_en, data->base + reg->tmu_inten);
clk_enable(data->clk);
temp_code = readb(data->base + reg->tmu_cur_temp);
- temp = code_to_temp(data, temp_code);
+ if (data->soc == SOC_ARCH_EXYNOS4210)
+ /* temp_code should range between 75 and 175 */
+ if (temp_code < 75 || temp_code > 175) {
+ temp = -ENODATA;
+ goto out;
+ }
+
+ temp = code_to_temp(data, temp_code);
+out:
clk_disable(data->clk);
mutex_unlock(&data->lock);
struct exynos_tmu_data, irq_work);
struct exynos_tmu_platform_data *pdata = data->pdata;
const struct exynos_tmu_registers *reg = pdata->registers;
- unsigned int val_irq, val_type;
+ unsigned int val_type;
if (!IS_ERR(data->clk_sec))
clk_enable(data->clk_sec);
clk_enable(data->clk);
/* TODO: take action based on particular interrupt */
- val_irq = readl(data->base + reg->tmu_intstat);
- /* clear the interrupts */
- writel(val_irq, data->base + reg->tmu_intclear);
+ exynos_tmu_clear_irqs(data);
clk_disable(data->clk);
mutex_unlock(&data->lock);
TYPE_NONE,
};
-enum calibration_mode {
- SW_MODE,
- HW_MODE,
-};
-
enum soc_type {
SOC_ARCH_EXYNOS3250 = 1,
SOC_ARCH_EXYNOS4210,
* bitfields. The register validity, offsets and bitfield values may vary
* slightly across different exynos SOC's.
* @triminfo_data: register containing 2 pont trimming data
- * @triminfo_25_shift: shift bit of the 25 C trim value in triminfo_data reg.
- * @triminfo_85_shift: shift bit of the 85 C trim value in triminfo_data reg.
* @triminfo_ctrl: trim info controller register.
- * @triminfo_reload_shift: shift of triminfo reload enable bit in triminfo_ctrl
- reg.
+ * @triminfo_ctrl_count: the number of trim info controller register.
* @tmu_ctrl: TMU main controller register.
* @test_mux_addr_shift: shift bits of test mux address.
- * @buf_vref_sel_shift: shift bits of reference voltage in tmu_ctrl register.
- * @buf_vref_sel_mask: mask bits of reference voltage in tmu_ctrl register.
* @therm_trip_mode_shift: shift bits of tripping mode in tmu_ctrl register.
* @therm_trip_mode_mask: mask bits of tripping mode in tmu_ctrl register.
* @therm_trip_en_shift: shift bits of tripping enable in tmu_ctrl register.
- * @buf_slope_sel_shift: shift bits of amplifier gain value in tmu_ctrl
- register.
- * @buf_slope_sel_mask: mask bits of amplifier gain value in tmu_ctrl register.
- * @calib_mode_shift: shift bits of calibration mode value in tmu_ctrl
- register.
- * @calib_mode_mask: mask bits of calibration mode value in tmu_ctrl
- register.
- * @therm_trip_tq_en_shift: shift bits of thermal trip enable by TQ pin in
- tmu_ctrl register.
- * @core_en_shift: shift bits of TMU core enable bit in tmu_ctrl register.
* @tmu_status: register drescribing the TMU status.
* @tmu_cur_temp: register containing the current temperature of the TMU.
- * @tmu_cur_temp_shift: shift bits of current temp value in tmu_cur_temp
- register.
* @threshold_temp: register containing the base threshold level.
* @threshold_th0: Register containing first set of rising levels.
- * @threshold_th0_l0_shift: shift bits of level0 threshold temperature.
- * @threshold_th0_l1_shift: shift bits of level1 threshold temperature.
- * @threshold_th0_l2_shift: shift bits of level2 threshold temperature.
- * @threshold_th0_l3_shift: shift bits of level3 threshold temperature.
* @threshold_th1: Register containing second set of rising levels.
- * @threshold_th1_l0_shift: shift bits of level0 threshold temperature.
- * @threshold_th1_l1_shift: shift bits of level1 threshold temperature.
- * @threshold_th1_l2_shift: shift bits of level2 threshold temperature.
- * @threshold_th1_l3_shift: shift bits of level3 threshold temperature.
* @threshold_th2: Register containing third set of rising levels.
- * @threshold_th2_l0_shift: shift bits of level0 threshold temperature.
- * @threshold_th3: Register containing fourth set of rising levels.
* @threshold_th3_l0_shift: shift bits of level0 threshold temperature.
* @tmu_inten: register containing the different threshold interrupt
enable bits.
* @inten_rise2_shift: shift bits of rising 2 interrupt bits.
* @inten_rise3_shift: shift bits of rising 3 interrupt bits.
* @inten_fall0_shift: shift bits of falling 0 interrupt bits.
- * @inten_fall1_shift: shift bits of falling 1 interrupt bits.
- * @inten_fall2_shift: shift bits of falling 2 interrupt bits.
- * @inten_fall3_shift: shift bits of falling 3 interrupt bits.
* @tmu_intstat: Register containing the interrupt status values.
* @tmu_intclear: Register for clearing the raised interrupt status.
- * @intclr_fall_shift: shift bits for interrupt clear fall 0
- * @intclr_rise_shift: shift bits of all rising interrupt bits.
- * @intclr_rise_mask: mask bits of all rising interrupt bits.
- * @intclr_fall_mask: mask bits of all rising interrupt bits.
* @emul_con: TMU emulation controller register.
* @emul_temp_shift: shift bits of emulation temperature.
* @emul_time_shift: shift bits of emulation time.
- * @emul_time_mask: mask bits of emulation time.
* @tmu_irqstatus: register to find which TMU generated interrupts.
* @tmu_pmin: register to get/set the Pmin value.
*/
struct exynos_tmu_registers {
u32 triminfo_data;
- u32 triminfo_25_shift;
- u32 triminfo_85_shift;
- u32 triminfo_ctrl;
- u32 triminfo_ctrl1;
- u32 triminfo_reload_shift;
+ u32 triminfo_ctrl[MAX_TRIMINFO_CTRL_REG];
+ u32 triminfo_ctrl_count;
u32 tmu_ctrl;
u32 test_mux_addr_shift;
- u32 buf_vref_sel_shift;
- u32 buf_vref_sel_mask;
u32 therm_trip_mode_shift;
u32 therm_trip_mode_mask;
u32 therm_trip_en_shift;
- u32 buf_slope_sel_shift;
- u32 buf_slope_sel_mask;
- u32 calib_mode_shift;
- u32 calib_mode_mask;
- u32 therm_trip_tq_en_shift;
- u32 core_en_shift;
u32 tmu_status;
u32 tmu_cur_temp;
- u32 tmu_cur_temp_shift;
u32 threshold_temp;
u32 threshold_th0;
- u32 threshold_th0_l0_shift;
- u32 threshold_th0_l1_shift;
- u32 threshold_th0_l2_shift;
- u32 threshold_th0_l3_shift;
-
u32 threshold_th1;
- u32 threshold_th1_l0_shift;
- u32 threshold_th1_l1_shift;
- u32 threshold_th1_l2_shift;
- u32 threshold_th1_l3_shift;
-
u32 threshold_th2;
- u32 threshold_th2_l0_shift;
-
- u32 threshold_th3;
u32 threshold_th3_l0_shift;
u32 tmu_inten;
u32 inten_rise2_shift;
u32 inten_rise3_shift;
u32 inten_fall0_shift;
- u32 inten_fall1_shift;
- u32 inten_fall2_shift;
- u32 inten_fall3_shift;
u32 tmu_intstat;
u32 tmu_intclear;
- u32 intclr_fall_shift;
- u32 intclr_rise_shift;
- u32 intclr_fall_mask;
- u32 intclr_rise_mask;
u32 emul_con;
u32 emul_temp_shift;
u32 emul_time_shift;
- u32 emul_time_mask;
u32 tmu_irqstatus;
u32 tmu_pmin;
* 1 = enable trigger_level[] interrupt,
* 0 = disable trigger_level[] interrupt
* @max_trigger_level: max trigger level supported by the TMU
+ * @non_hw_trigger_levels: number of defined non-hardware trigger levels
* @gain: gain of amplifier in the positive-TC generator block
- * 0 <= gain <= 15
+ * 0 < gain <= 15
* @reference_voltage: reference voltage of amplifier
* in the positive-TC generator block
- * 0 <= reference_voltage <= 31
+ * 0 < reference_voltage <= 31
* @noise_cancel_mode: noise cancellation mode
* 000, 100, 101, 110 and 111 can be different modes
* @type: determines the type of SOC
* @second_point_trim: temp value of the second point trimming
* @default_temp_offset: default temperature offset in case of no trimming
* @test_mux; information if SoC supports test MUX
+ * @triminfo_reload: reload value to read TRIMINFO register
* @cal_type: calibration type for temperature
- * @cal_mode: calibration mode for temperature
* @freq_clip_table: Table representing frequency reduction percentage.
* @freq_tab_count: Count of the above table as frequency reduction may
* applicable to only some of the trigger levels.
enum trigger_type trigger_type[MAX_TRIP_COUNT];
bool trigger_enable[MAX_TRIP_COUNT];
u8 max_trigger_level;
+ u8 non_hw_trigger_levels;
u8 gain;
u8 reference_voltage;
u8 noise_cancel_mode;
u8 second_point_trim;
u8 default_temp_offset;
u8 test_mux;
+ u8 triminfo_reload[MAX_TRIMINFO_CTRL_REG];
enum calibration_type cal_type;
- enum calibration_mode cal_mode;
enum soc_type type;
struct freq_clip_table freq_tab[4];
unsigned int freq_tab_count;
#if defined(CONFIG_CPU_EXYNOS4210)
static const struct exynos_tmu_registers exynos4210_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
- .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
- .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
- .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
- .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
- .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
- .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
- .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_temp = EXYNOS4210_TMU_REG_THRESHOLD_TEMP,
.inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
- .intclr_rise_mask = EXYNOS4210_TMU_TRIG_LEVEL_MASK,
};
struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
.trigger_type[1] = THROTTLE_ACTIVE,
.trigger_type[2] = SW_TRIP,
.max_trigger_level = 4,
+ .non_hw_trigger_levels = 3,
.gain = 15,
.reference_voltage = 7,
.cal_type = TYPE_ONE_POINT_TRIMMING,
#if defined(CONFIG_SOC_EXYNOS3250)
static const struct exynos_tmu_registers exynos3250_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
- .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
- .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
+ .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON1,
+ .triminfo_ctrl[1] = EXYNOS_TMU_TRIMINFO_CON2,
+ .triminfo_ctrl_count = 2,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
- .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
- .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
- .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
- .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
- .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_th0 = EXYNOS_THD_TEMP_RISE,
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
- .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT,
- .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
- .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
- .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
.emul_con = EXYNOS_EMUL_CON,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
- .emul_time_mask = EXYNOS_EMUL_TIME_MASK,
};
#define EXYNOS3250_TMU_DATA \
.trigger_type[2] = SW_TRIP, \
.trigger_type[3] = HW_TRIP, \
.max_trigger_level = 4, \
+ .non_hw_trigger_levels = 3, \
.gain = 8, \
.reference_voltage = 16, \
.noise_cancel_mode = 4, \
.temp_level = 95, \
}, \
.freq_tab_count = 2, \
+ .triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \
+ .triminfo_reload[1] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \
.registers = &exynos3250_tmu_registers, \
- .features = (TMU_SUPPORT_EMULATION | \
+ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
TMU_SUPPORT_EMUL_TIME)
#endif
#if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250)
static const struct exynos_tmu_registers exynos4412_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
- .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
- .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
- .triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON,
- .triminfo_reload_shift = EXYNOS_TRIMINFO_RELOAD_SHIFT,
+ .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON2,
+ .triminfo_ctrl_count = 1,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
- .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
- .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
- .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
- .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
- .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_th0 = EXYNOS_THD_TEMP_RISE,
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
- .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT,
- .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
- .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
- .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
.emul_con = EXYNOS_EMUL_CON,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
- .emul_time_mask = EXYNOS_EMUL_TIME_MASK,
};
#define EXYNOS4412_TMU_DATA \
.trigger_type[2] = SW_TRIP, \
.trigger_type[3] = HW_TRIP, \
.max_trigger_level = 4, \
+ .non_hw_trigger_levels = 3, \
.gain = 8, \
.reference_voltage = 16, \
.noise_cancel_mode = 4, \
.temp_level = 95, \
}, \
.freq_tab_count = 2, \
+ .triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \
.registers = &exynos4412_tmu_registers, \
.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
#if defined(CONFIG_SOC_EXYNOS5260)
static const struct exynos_tmu_registers exynos5260_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
- .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
- .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
- .tmu_ctrl = EXYNOS_TMU_REG_CONTROL1,
- .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
- .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
- .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
- .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
- .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_th0 = EXYNOS_THD_TEMP_RISE,
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR,
- .intclr_fall_shift = EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT,
- .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
- .intclr_rise_mask = EXYNOS5260_TMU_RISE_INT_MASK,
- .intclr_fall_mask = EXYNOS5260_TMU_FALL_INT_MASK,
.emul_con = EXYNOS5260_EMUL_CON,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
- .emul_time_mask = EXYNOS_EMUL_TIME_MASK,
};
#define __EXYNOS5260_TMU_DATA \
.trigger_type[2] = SW_TRIP, \
.trigger_type[3] = HW_TRIP, \
.max_trigger_level = 4, \
+ .non_hw_trigger_levels = 3, \
.gain = 8, \
.reference_voltage = 16, \
.noise_cancel_mode = 4, \
#define EXYNOS5260_TMU_DATA \
__EXYNOS5260_TMU_DATA \
.type = SOC_ARCH_EXYNOS5260, \
- .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
- TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
- TMU_SUPPORT_EMUL_TIME)
+ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
+ TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME)
struct exynos_tmu_init_data const exynos5260_default_tmu_data = {
.tmu_data = {
#if defined(CONFIG_SOC_EXYNOS5420)
static const struct exynos_tmu_registers exynos5420_tmu_registers = {
.triminfo_data = EXYNOS_TMU_REG_TRIMINFO,
- .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
- .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
- .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
- .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
- .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
- .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
- .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS_TMU_REG_STATUS,
.tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP,
.threshold_th0 = EXYNOS_THD_TEMP_RISE,
.inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS_TMU_REG_INTSTAT,
.tmu_intclear = EXYNOS_TMU_REG_INTCLEAR,
- .intclr_fall_shift = EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT,
- .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT,
- .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK,
- .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK,
.emul_con = EXYNOS_EMUL_CON,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.emul_time_shift = EXYNOS_EMUL_TIME_SHIFT,
- .emul_time_mask = EXYNOS_EMUL_TIME_MASK,
};
#define __EXYNOS5420_TMU_DATA \
.trigger_type[2] = SW_TRIP, \
.trigger_type[3] = HW_TRIP, \
.max_trigger_level = 4, \
+ .non_hw_trigger_levels = 3, \
.gain = 8, \
.reference_voltage = 16, \
.noise_cancel_mode = 4, \
#define EXYNOS5420_TMU_DATA \
__EXYNOS5420_TMU_DATA \
.type = SOC_ARCH_EXYNOS5250, \
- .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
- TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
- TMU_SUPPORT_EMUL_TIME)
+ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
+ TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME)
#define EXYNOS5420_TMU_DATA_SHARED \
__EXYNOS5420_TMU_DATA \
.type = SOC_ARCH_EXYNOS5420_TRIMINFO, \
- .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
- TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
- TMU_SUPPORT_EMUL_TIME | TMU_SUPPORT_ADDRESS_MULTIPLE)
+ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \
+ TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME | \
+ TMU_SUPPORT_ADDRESS_MULTIPLE)
struct exynos_tmu_init_data const exynos5420_default_tmu_data = {
.tmu_data = {
#if defined(CONFIG_SOC_EXYNOS5440)
static const struct exynos_tmu_registers exynos5440_tmu_registers = {
.triminfo_data = EXYNOS5440_TMU_S0_7_TRIM,
- .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT,
- .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT,
.tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL,
- .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT,
- .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
.therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK,
.therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT,
- .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT,
- .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK,
- .calib_mode_shift = EXYNOS_TMU_CALIB_MODE_SHIFT,
- .calib_mode_mask = EXYNOS_TMU_CALIB_MODE_MASK,
- .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT,
.tmu_status = EXYNOS5440_TMU_S0_7_STATUS,
.tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP,
.threshold_th0 = EXYNOS5440_TMU_S0_7_TH0,
.inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT,
.tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ,
.tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ,
- .intclr_fall_shift = EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT,
- .intclr_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT,
- .intclr_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK,
- .intclr_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK,
.tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS,
.emul_con = EXYNOS5440_TMU_S0_7_DEBUG,
.emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT,
.trigger_type[0] = SW_TRIP, \
.trigger_type[4] = HW_TRIP, \
.max_trigger_level = 5, \
+ .non_hw_trigger_levels = 1, \
.gain = 5, \
.reference_voltage = 16, \
.noise_cancel_mode = 4, \
.cal_type = TYPE_ONE_POINT_TRIMMING, \
- .cal_mode = 0, \
.efuse_value = 0x5b2d, \
.min_efuse_value = 16, \
.max_efuse_value = 76, \
#define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT 8
#define EXYNOS_TMU_CORE_EN_SHIFT 0
+/* Exynos3250 specific registers */
+#define EXYNOS_TMU_TRIMINFO_CON1 0x10
+
/* Exynos4210 specific registers */
#define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44
#define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50
-#define EXYNOS4210_TMU_REG_TRIG_LEVEL1 0x54
-#define EXYNOS4210_TMU_REG_TRIG_LEVEL2 0x58
-#define EXYNOS4210_TMU_REG_TRIG_LEVEL3 0x5C
-#define EXYNOS4210_TMU_REG_PAST_TEMP0 0x60
-#define EXYNOS4210_TMU_REG_PAST_TEMP1 0x64
-#define EXYNOS4210_TMU_REG_PAST_TEMP2 0x68
-#define EXYNOS4210_TMU_REG_PAST_TEMP3 0x6C
-
-#define EXYNOS4210_TMU_TRIG_LEVEL0_MASK 0x1
-#define EXYNOS4210_TMU_TRIG_LEVEL1_MASK 0x10
-#define EXYNOS4210_TMU_TRIG_LEVEL2_MASK 0x100
-#define EXYNOS4210_TMU_TRIG_LEVEL3_MASK 0x1000
-#define EXYNOS4210_TMU_TRIG_LEVEL_MASK 0x1111
-#define EXYNOS4210_TMU_INTCLEAR_VAL 0x1111
-
-/* Exynos5250 and Exynos4412 specific registers */
-#define EXYNOS_TMU_TRIMINFO_CON 0x14
+
+/* Exynos5250, Exynos4412, Exynos3250 specific registers */
+#define EXYNOS_TMU_TRIMINFO_CON2 0x14
#define EXYNOS_THD_TEMP_RISE 0x50
#define EXYNOS_THD_TEMP_FALL 0x54
#define EXYNOS_EMUL_CON 0x80
-#define EXYNOS_TRIMINFO_RELOAD_SHIFT 1
+#define EXYNOS_TRIMINFO_RELOAD_ENABLE 1
#define EXYNOS_TRIMINFO_25_SHIFT 0
#define EXYNOS_TRIMINFO_85_SHIFT 8
-#define EXYNOS_TMU_RISE_INT_MASK 0x111
-#define EXYNOS_TMU_RISE_INT_SHIFT 0
-#define EXYNOS_TMU_FALL_INT_MASK 0x111
-#define EXYNOS_TMU_CLEAR_RISE_INT 0x111
-#define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12)
-#define EXYNOS_TMU_CLEAR_FALL_INT_SHIFT 12
-#define EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT 16
-#define EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT 4
#define EXYNOS_TMU_TRIP_MODE_SHIFT 13
#define EXYNOS_TMU_TRIP_MODE_MASK 0x7
#define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12
-#define EXYNOS_TMU_CALIB_MODE_SHIFT 4
-#define EXYNOS_TMU_CALIB_MODE_MASK 0x3
#define EXYNOS_TMU_INTEN_RISE0_SHIFT 0
#define EXYNOS_TMU_INTEN_RISE1_SHIFT 4
#define EXYNOS_TMU_INTEN_RISE2_SHIFT 8
#define EXYNOS_TMU_INTEN_RISE3_SHIFT 12
#define EXYNOS_TMU_INTEN_FALL0_SHIFT 16
-#define EXYNOS_TMU_INTEN_FALL1_SHIFT 20
-#define EXYNOS_TMU_INTEN_FALL2_SHIFT 24
-#define EXYNOS_TMU_INTEN_FALL3_SHIFT 28
#define EXYNOS_EMUL_TIME 0x57F0
#define EXYNOS_EMUL_TIME_MASK 0xffff
#define EXYNOS_MAX_TRIGGER_PER_REG 4
/* Exynos5260 specific */
-#define EXYNOS_TMU_REG_CONTROL1 0x24
#define EXYNOS5260_TMU_REG_INTEN 0xC0
#define EXYNOS5260_TMU_REG_INTSTAT 0xC4
#define EXYNOS5260_TMU_REG_INTCLEAR 0xC8
-#define EXYNOS5260_TMU_CLEAR_RISE_INT 0x1111
-#define EXYNOS5260_TMU_CLEAR_FALL_INT (0x1111 << 16)
-#define EXYNOS5260_TMU_RISE_INT_MASK 0x1111
-#define EXYNOS5260_TMU_FALL_INT_MASK 0x1111
#define EXYNOS5260_EMUL_CON 0x100
/* Exynos4412 specific */
#define EXYNOS5440_TMU_S0_7_TH0 0x110
#define EXYNOS5440_TMU_S0_7_TH1 0x130
#define EXYNOS5440_TMU_S0_7_TH2 0x150
-#define EXYNOS5440_TMU_S0_7_EVTEN 0x1F0
#define EXYNOS5440_TMU_S0_7_IRQEN 0x210
#define EXYNOS5440_TMU_S0_7_IRQ 0x230
/* exynos5440 common registers */
#define EXYNOS5440_TMU_IRQ_STATUS 0x000
#define EXYNOS5440_TMU_PMIN 0x004
-#define EXYNOS5440_TMU_TEMP 0x008
-#define EXYNOS5440_TMU_RISE_INT_MASK 0xf
-#define EXYNOS5440_TMU_RISE_INT_SHIFT 0
-#define EXYNOS5440_TMU_FALL_INT_MASK 0xf
#define EXYNOS5440_TMU_INTEN_RISE0_SHIFT 0
#define EXYNOS5440_TMU_INTEN_RISE1_SHIFT 1
#define EXYNOS5440_TMU_INTEN_RISE2_SHIFT 2
#define EXYNOS5440_TMU_INTEN_RISE3_SHIFT 3
#define EXYNOS5440_TMU_INTEN_FALL0_SHIFT 4
-#define EXYNOS5440_TMU_INTEN_FALL1_SHIFT 5
-#define EXYNOS5440_TMU_INTEN_FALL2_SHIFT 6
-#define EXYNOS5440_TMU_INTEN_FALL3_SHIFT 7
-#define EXYNOS5440_TMU_TH_RISE0_SHIFT 0
-#define EXYNOS5440_TMU_TH_RISE1_SHIFT 8
-#define EXYNOS5440_TMU_TH_RISE2_SHIFT 16
-#define EXYNOS5440_TMU_TH_RISE3_SHIFT 24
#define EXYNOS5440_TMU_TH_RISE4_SHIFT 24
#define EXYNOS5440_EFUSE_SWAP_OFFSET 8
}
EXPORT_SYMBOL_GPL(st_thermal_unregister);
+#ifdef CONFIG_PM_SLEEP
static int st_thermal_suspend(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
return 0;
}
+#endif
+
SIMPLE_DEV_PM_OPS(st_thermal_pm_ops, st_thermal_suspend, st_thermal_resume);
EXPORT_SYMBOL_GPL(st_thermal_pm_ops);
*/
#include <linux/thermal.h>
+#include <trace/events/thermal.h>
#include "thermal_core.h"
next_target = instance->upper;
break;
case THERMAL_TREND_DROPPING:
- if (cur_state == instance->lower) {
+ if (cur_state <= instance->lower) {
if (!throttle)
next_target = THERMAL_NO_TARGET;
} else {
trend = get_tz_trend(tz, trip);
- if (tz->temperature >= trip_temp)
+ if (tz->temperature >= trip_temp) {
throttle = true;
+ trace_thermal_zone_trip(tz, trip, trip_type);
+ }
dev_dbg(&tz->device, "Trip%d[type=%d,temp=%ld]:trend=%d,throttle=%d\n",
trip, trip_type, trip_temp, trend, throttle);
#include <net/netlink.h>
#include <net/genetlink.h>
+#define CREATE_TRACE_POINTS
+#include <trace/events/thermal.h>
+
#include "thermal_core.h"
#include "thermal_hwmon.h"
if (tz->temperature < trip_temp)
return;
+ trace_thermal_zone_trip(tz, trip, trip_type);
+
if (tz->ops->notify)
tz->ops->notify(tz, trip, trip_type);
tz->temperature = temp;
mutex_unlock(&tz->lock);
+ trace_thermal_temperature(tz);
dev_dbg(&tz->device, "last_temperature=%d, current_temperature=%d\n",
tz->last_temperature, tz->temperature);
}
mutex_unlock(&cdev->lock);
cdev->ops->set_cur_state(cdev, target);
cdev->updated = true;
+ trace_cdev_update(cdev, target);
dev_dbg(&cdev->device, "set to state %lu\n", target);
}
EXPORT_SYMBOL(thermal_cdev_update);
thermal_zone_device_update(tz);
- if (!result)
- return tz;
+ return tz;
unregister:
release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id);
if (result)
return result;
+ result = thermal_gov_bang_bang_register();
+ if (result)
+ return result;
+
return thermal_gov_user_space_register();
}
{
thermal_gov_step_wise_unregister();
thermal_gov_fair_share_unregister();
+ thermal_gov_bang_bang_unregister();
thermal_gov_user_space_unregister();
}
static inline void thermal_gov_fair_share_unregister(void) {}
#endif /* CONFIG_THERMAL_GOV_FAIR_SHARE */
+#ifdef CONFIG_THERMAL_GOV_BANG_BANG
+int thermal_gov_bang_bang_register(void);
+void thermal_gov_bang_bang_unregister(void);
+#else
+static inline int thermal_gov_bang_bang_register(void) { return 0; }
+static inline void thermal_gov_bang_bang_unregister(void) {}
+#endif /* CONFIG_THERMAL_GOV_BANG_BANG */
+
#ifdef CONFIG_THERMAL_GOV_USER_SPACE
int thermal_gov_user_space_register(void);
void thermal_gov_user_space_unregister(void);
{
struct n_tty_data *ldata = tty->disc_data;
unsigned char __user *b = buf;
- DECLARE_WAITQUEUE(wait, current);
+ DEFINE_WAIT_FUNC(wait, woken_wake_function);
int c;
int minimum, time;
ssize_t retval = 0;
nr--;
break;
}
- /* This statement must be first before checking for input
- so that any interrupt will set the state back to
- TASK_RUNNING. */
- set_current_state(TASK_INTERRUPTIBLE);
if (((minimum - (b - buf)) < ldata->minimum_to_wake) &&
((minimum - (b - buf)) >= 1))
n_tty_set_room(tty);
up_read(&tty->termios_rwsem);
- timeout = schedule_timeout(timeout);
+ timeout = wait_woken(&wait, TASK_INTERRUPTIBLE,
+ timeout);
down_read(&tty->termios_rwsem);
continue;
}
}
- __set_current_state(TASK_RUNNING);
/* Deal with packet mode. */
if (packet && b == buf) {
mutex_unlock(&ldata->atomic_read_lock);
- __set_current_state(TASK_RUNNING);
if (b - buf)
retval = b - buf;
const unsigned char *buf, size_t nr)
{
const unsigned char *b = buf;
- DECLARE_WAITQUEUE(wait, current);
+ DEFINE_WAIT_FUNC(wait, woken_wake_function);
int c;
ssize_t retval = 0;
add_wait_queue(&tty->write_wait, &wait);
while (1) {
- set_current_state(TASK_INTERRUPTIBLE);
if (signal_pending(current)) {
retval = -ERESTARTSYS;
break;
}
up_read(&tty->termios_rwsem);
- schedule();
+ wait_woken(&wait, TASK_INTERRUPTIBLE, MAX_SCHEDULE_TIMEOUT);
down_read(&tty->termios_rwsem);
}
break_out:
- __set_current_state(TASK_RUNNING);
remove_wait_queue(&tty->write_wait, &wait);
if (b - buf != nr && tty->fasync)
set_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
poll_wait(file, &tty->read_wait, wait);
poll_wait(file, &tty->write_wait, wait);
+ if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
+ mask |= POLLHUP;
if (input_available_p(tty, 1))
mask |= POLLIN | POLLRDNORM;
+ else if (mask & POLLHUP) {
+ tty_flush_to_ldisc(tty);
+ if (input_available_p(tty, 1))
+ mask |= POLLIN | POLLRDNORM;
+ }
if (tty->packet && tty->link->ctrl_status)
mask |= POLLPRI | POLLIN | POLLRDNORM;
- if (test_bit(TTY_OTHER_CLOSED, &tty->flags))
- mask |= POLLHUP;
if (tty_hung_up_p(file))
mask |= POLLHUP;
if (!(mask & (POLLHUP | POLLIN | POLLRDNORM))) {
/* Set to highest baudrate supported */
if (baud >= 1152000)
baud = 921600;
- quot = DIV_ROUND_CLOSEST(port->uartclk, 256 * baud);
+ quot = (port->uartclk / (256 * baud)) + 1;
}
/*
config SERIAL_SAMSUNG_UARTS_4
bool
- depends on PLAT_SAMSUNG
+ depends on SERIAL_SAMSUNG
default y if !(CPU_S3C2410 || CPU_S3C2412 || CPU_S3C2440 || CPU_S3C2442)
help
Internal node for the common case of 4 Samsung compatible UARTs
config SERIAL_SAMSUNG_UARTS
int
- depends on PLAT_SAMSUNG
+ depends on SERIAL_SAMSUNG
default 4 if SERIAL_SAMSUNG_UARTS_4 || CPU_S3C2416
default 3
help
if (of_find_property(ofdev->dev.of_node, "used-by-rtas", NULL))
return -EBUSY;
- info = kmalloc(sizeof(*info), GFP_KERNEL);
+ info = kzalloc(sizeof(*info), GFP_KERNEL);
if (info == NULL)
return -ENOMEM;
return 0;
}
-#ifdef CONFIG_PM_SLEEP
-static int of_serial_suspend(struct device *dev)
-{
- struct of_serial_info *info = dev_get_drvdata(dev);
-
- serial8250_suspend_port(info->line);
- if (info->clk)
- clk_disable_unprepare(info->clk);
-
- return 0;
-}
-
-static int of_serial_resume(struct device *dev)
-{
- struct of_serial_info *info = dev_get_drvdata(dev);
-
- if (info->clk)
- clk_prepare_enable(info->clk);
-
- serial8250_resume_port(info->line);
-
- return 0;
-}
-#endif
-static SIMPLE_DEV_PM_OPS(of_serial_pm_ops, of_serial_suspend, of_serial_resume);
-
/*
* A few common types, add more as needed.
*/
.name = "of_serial",
.owner = THIS_MODULE,
.of_match_table = of_platform_serial_table,
- .pm = &of_serial_pm_ops,
},
.probe = of_platform_serial_probe,
.remove = of_platform_serial_remove,
* The spd_hi, spd_vhi, spd_shi, spd_warp kludge...
* Die! Die! Die!
*/
- if (baud == 38400)
+ if (try == 0 && baud == 38400)
baud = altbaud;
/*
int pty_master, tty_closing, o_tty_closing, do_sleep;
int idx;
char buf[64];
+ long timeout = 0;
+ int once = 1;
if (tty_paranoia_check(tty, inode, __func__))
return 0;
if (!do_sleep)
break;
- printk(KERN_WARNING "%s: %s: read/write wait queue active!\n",
- __func__, tty_name(tty, buf));
+ if (once) {
+ once = 0;
+ printk(KERN_WARNING "%s: %s: read/write wait queue active!\n",
+ __func__, tty_name(tty, buf));
+ }
tty_unlock_pair(tty, o_tty);
mutex_unlock(&tty_mutex);
- schedule();
+ schedule_timeout_killable(timeout);
+ if (timeout < 120 * HZ)
+ timeout = 2 * timeout + 1;
+ else
+ timeout = MAX_SCHEDULE_TIMEOUT;
}
/*
/* Save original vc_unipagdir_loc in case we allocate a new one */
p = *vc->vc_uni_pagedir_loc;
+
+ if (!p) {
+ err = -EINVAL;
+
+ goto out_unlock;
+ }
if (p->refcount > 1) {
int j, k;
set_inverse_transl(vc, p, i); /* Update inverse translations */
set_inverse_trans_unicode(vc, p);
+out_unlock:
console_unlock();
return err;
}
#define UIO_MAX_DEVICES (1U << MINORBITS)
-struct uio_device {
- struct module *owner;
- struct device *dev;
- int minor;
- atomic_t event;
- struct fasync_struct *async_queue;
- wait_queue_head_t wait;
- struct uio_info *info;
- struct kobject *map_dir;
- struct kobject *portio_dir;
-};
-
static int uio_major;
static struct cdev *uio_cdev;
static DEFINE_IDR(uio_idr);
ci_role_destroy(ci);
ci_hdrc_enter_lpm(ci, true);
usb_phy_shutdown(ci->transceiver);
- kfree(ci->hw_bank.regmap);
return 0;
}
static DEFINE_MUTEX(acm_table_lock);
+static void acm_tty_set_termios(struct tty_struct *tty,
+ struct ktermios *termios_old);
+
/*
* acm_table accessors
*/
/* devices aren't required to support these requests.
* the cdc acm descriptor tells whether they do...
*/
-#define acm_set_control(acm, control) \
- acm_ctrl_msg(acm, USB_CDC_REQ_SET_CONTROL_LINE_STATE, control, NULL, 0)
+static inline int acm_set_control(struct acm *acm, int control)
+{
+ if (acm->quirks & QUIRK_CONTROL_LINE_STATE)
+ return -EOPNOTSUPP;
+
+ return acm_ctrl_msg(acm, USB_CDC_REQ_SET_CONTROL_LINE_STATE,
+ control, NULL, 0);
+}
+
#define acm_set_line(acm, line) \
acm_ctrl_msg(acm, USB_CDC_REQ_SET_LINE_CODING, 0, line, sizeof *(line))
#define acm_send_break(acm, ms) \
goto error_submit_urb;
}
+ acm_tty_set_termios(tty, NULL);
+
/*
* Unthrottle device in case the TTY was closed while throttled.
*/
/* FIXME: Needs to clear unsupported bits in the termios */
acm->clocal = ((termios->c_cflag & CLOCAL) != 0);
- if (!newline.dwDTERate) {
+ if (C_BAUD(tty) == B0) {
newline.dwDTERate = acm->line.dwDTERate;
newctrl &= ~ACM_CTRL_DTR;
- } else
+ } else if (termios_old && (termios_old->c_cflag & CBAUD) == B0) {
newctrl |= ACM_CTRL_DTR;
+ }
if (newctrl != acm->ctrlout)
acm_set_control(acm, acm->ctrlout = newctrl);
tty_port_init(&acm->port);
acm->port.ops = &acm_port_ops;
init_usb_anchor(&acm->delayed);
+ acm->quirks = quirks;
buf = usb_alloc_coherent(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma);
if (!buf) {
{ USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */
.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
},
+ { USB_DEVICE(0x20df, 0x0001), /* Simtec Electronics Entropy Key */
+ .driver_info = QUIRK_CONTROL_LINE_STATE, },
+ { USB_DEVICE(0x2184, 0x001c) }, /* GW Instek AFG-2225 */
{ USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */
},
/* Motorola H24 HSPA module: */
unsigned int throttle_req:1; /* throttle requested */
u8 bInterval;
struct usb_anchor delayed; /* writes queued for a device about to be woken */
+ unsigned long quirks;
};
#define CDC_DATA_INTERFACE_TYPE 0x0a
#define NOT_A_MODEM BIT(3)
#define NO_DATA_INTERFACE BIT(4)
#define IGNORE_DEVICE BIT(5)
+#define QUIRK_CONTROL_LINE_STATE BIT(6)
return -EINVAL;
if (dev->speed != USB_SPEED_SUPER)
return -EINVAL;
+ if (dev->state < USB_STATE_CONFIGURED)
+ return -ENODEV;
for (i = 0; i < num_eps; i++) {
/* Streams only apply to bulk endpoints. */
if (retval)
goto fail;
- if (hcd->usb_phy && !hdev->parent)
- usb_phy_notify_connect(hcd->usb_phy, udev->speed);
-
/*
* Some superspeed devices have finished the link training process
* and attached to a superspeed hub port, but the device descriptor
/* Disconnect any existing devices under this port */
if (udev) {
- if (hcd->usb_phy && !hdev->parent &&
- !(portstatus & USB_PORT_STAT_CONNECTION))
+ if (hcd->usb_phy && !hdev->parent)
usb_phy_notify_disconnect(hcd->usb_phy, udev->speed);
usb_disconnect(&port_dev->child);
}
port_dev->child = NULL;
spin_unlock_irq(&device_state_lock);
mutex_unlock(&usb_port_peer_mutex);
+ } else {
+ if (hcd->usb_phy && !hdev->parent)
+ usb_phy_notify_connect(hcd->usb_phy,
+ udev->speed);
}
}
/* Creative SB Audigy 2 NX */
{ USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },
+ /* Microsoft Wireless Laser Mouse 6000 Receiver */
+ { USB_DEVICE(0x045e, 0x00e1), .driver_info = USB_QUIRK_RESET_RESUME },
+
/* Microsoft LifeCam-VX700 v2.0 */
{ USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME },
{ USB_DEVICE(0x04f3, 0x0089), .driver_info =
USB_QUIRK_DEVICE_QUALIFIER },
+ { USB_DEVICE(0x04f3, 0x009b), .driver_info =
+ USB_QUIRK_DEVICE_QUALIFIER },
+
+ { USB_DEVICE(0x04f3, 0x016f), .driver_info =
+ USB_QUIRK_DEVICE_QUALIFIER },
+
/* Roland SC-8820 */
{ USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },
unsigned port_suspend_change:1;
unsigned port_over_current_change:1;
unsigned port_l1_change:1;
- unsigned reserved:26;
+ unsigned reserved:25;
} b;
} flags;
u32 usb_status = readl(hsotg->regs + GOTGCTL);
- dev_info(hsotg->dev, "%s: USBRst\n", __func__);
+ dev_dbg(hsotg->dev, "%s: USBRst\n", __func__);
dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n",
readl(hsotg->regs + GNPTXSTS));
hs_ep->fifo_size = val;
break;
}
- if (i == 8)
- return -ENOMEM;
+ if (i == 8) {
+ ret = -ENOMEM;
+ goto error;
+ }
}
/* for non control endpoints, set PID to D0 */
/* enable the endpoint interrupt */
s3c_hsotg_ctrl_epint(hsotg, index, dir_in, 1);
+error:
spin_unlock_irqrestore(&hsotg->lock, flags);
return ret;
}
spin_lock_irqsave(&hsotg->lock, flags);
- if (!driver)
- hsotg->driver = NULL;
-
+ hsotg->driver = NULL;
hsotg->gadget.speed = USB_SPEED_UNKNOWN;
spin_unlock_irqrestore(&hsotg->lock, flags);
s3c_hsotg_initep(hsotg, &hsotg->eps[epnum], epnum);
/* disable power and clock */
+ s3c_hsotg_phy_disable(hsotg);
ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies),
hsotg->supplies);
goto err_ep_mem;
}
- s3c_hsotg_phy_disable(hsotg);
-
ret = usb_add_gadget_udc(&pdev->dev, &hsotg->gadget);
if (ret)
goto err_ep_mem;
{
struct dwc3_omap *omap = dev_get_drvdata(dev);
- dwc3_omap_write_irqmisc_set(omap, 0x00);
+ dwc3_omap_disable_irqs(omap);
return 0;
}
static void dwc3_omap_complete(struct device *dev)
{
struct dwc3_omap *omap = dev_get_drvdata(dev);
- u32 reg;
- reg = (USBOTGSS_IRQMISC_OEVT |
- USBOTGSS_IRQMISC_DRVVBUS_RISE |
- USBOTGSS_IRQMISC_CHRGVBUS_RISE |
- USBOTGSS_IRQMISC_DISCHRGVBUS_RISE |
- USBOTGSS_IRQMISC_IDPULLUP_RISE |
- USBOTGSS_IRQMISC_DRVVBUS_FALL |
- USBOTGSS_IRQMISC_CHRGVBUS_FALL |
- USBOTGSS_IRQMISC_DISCHRGVBUS_FALL |
- USBOTGSS_IRQMISC_IDPULLUP_FALL);
-
- dwc3_omap_write_irqmisc_set(omap, reg);
+ dwc3_omap_enable_irqs(omap);
}
static int dwc3_omap_suspend(struct device *dev)
#define PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3 0xabcd
#define PCI_DEVICE_ID_INTEL_BYT 0x0f37
#define PCI_DEVICE_ID_INTEL_MRFLD 0x119e
+#define PCI_DEVICE_ID_INTEL_BSW 0x22B7
struct dwc3_pci {
struct device *dev;
PCI_DEVICE(PCI_VENDOR_ID_SYNOPSYS,
PCI_DEVICE_ID_SYNOPSYS_HAPSUSB3),
},
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BSW), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_BYT), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_MRFLD), },
{ } /* Terminating Entry */
/* stall is always issued on EP0 */
dep = dwc->eps[0];
- __dwc3_gadget_ep_set_halt(dep, 1);
+ __dwc3_gadget_ep_set_halt(dep, 1, false);
dep->flags = DWC3_EP_ENABLED;
dwc->delayed_status = false;
dwc3_ep0_out_start(dwc);
}
-int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
+int __dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
{
struct dwc3_ep *dep = to_dwc3_ep(ep);
struct dwc3 *dwc = dep->dwc;
return 0;
}
+int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value)
+{
+ struct dwc3_ep *dep = to_dwc3_ep(ep);
+ struct dwc3 *dwc = dep->dwc;
+ unsigned long flags;
+ int ret;
+
+ spin_lock_irqsave(&dwc->lock, flags);
+ ret = __dwc3_gadget_ep0_set_halt(ep, value);
+ spin_unlock_irqrestore(&dwc->lock, flags);
+
+ return ret;
+}
+
void dwc3_ep0_out_start(struct dwc3 *dwc)
{
int ret;
return -EINVAL;
if (set == 0 && (dep->flags & DWC3_EP_WEDGE))
break;
- ret = __dwc3_gadget_ep_set_halt(dep, set);
+ ret = __dwc3_gadget_ep_set_halt(dep, set, true);
if (ret)
return -EINVAL;
break;
dwc->ep0_next_event = DWC3_EP0_NRDY_STATUS;
- r = next_request(&ep0->request_list);
- ur = &r->request;
-
trb = dwc->ep0_trb;
+ r = next_request(&ep0->request_list);
+ if (!r)
+ return;
+
status = DWC3_TRB_SIZE_TRBSTS(trb->size);
if (status == DWC3_TRBSTS_SETUP_PENDING) {
dwc3_trace(trace_dwc3_ep0, "Setup Pending received");
return;
}
+ ur = &r->request;
+
length = trb->size & DWC3_TRB_SIZE_MASK;
if (dwc->ep0_bounced) {
dwc3_ep0_stall_and_restart(dwc);
} else {
- /*
- * handle the case where we have to send a zero packet. This
- * seems to be case when req.length > maxpacket. Could it be?
- */
- if (r)
- dwc3_gadget_giveback(ep0, r, 0);
+ dwc3_gadget_giveback(ep0, r, 0);
+
+ if (IS_ALIGNED(ur->length, ep0->endpoint.maxpacket) &&
+ ur->length && ur->zero) {
+ int ret;
+
+ dwc->ep0_next_event = DWC3_EP0_COMPLETE;
+
+ ret = dwc3_ep0_start_trans(dwc, epnum,
+ dwc->ctrl_req_addr, 0,
+ DWC3_TRBCTL_CONTROL_DATA);
+ WARN_ON(ret < 0);
+ }
}
}
if (!usb_endpoint_xfer_isoc(desc))
return 0;
- memset(&trb_link, 0, sizeof(trb_link));
-
/* Link TRB for ISOC. The HWO bit is never reset */
trb_st_hw = &dep->trb_pool[0];
trb_link = &dep->trb_pool[DWC3_TRB_NUM - 1];
+ memset(trb_link, 0, sizeof(*trb_link));
trb_link->bpl = lower_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
trb_link->bph = upper_32_bits(dwc3_trb_dma_offset(dep, trb_st_hw));
/* make sure HW endpoint isn't stalled */
if (dep->flags & DWC3_EP_STALL)
- __dwc3_gadget_ep_set_halt(dep, 0);
+ __dwc3_gadget_ep_set_halt(dep, 0, false);
reg = dwc3_readl(dwc->regs, DWC3_DALEPENA);
reg &= ~DWC3_DALEPENA_EP(dep->number);
return ret;
}
-int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value)
+int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol)
{
struct dwc3_gadget_ep_cmd_params params;
struct dwc3 *dwc = dep->dwc;
int ret;
+ if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
+ dev_err(dwc->dev, "%s is of Isochronous type\n", dep->name);
+ return -EINVAL;
+ }
+
memset(¶ms, 0x00, sizeof(params));
if (value) {
+ if (!protocol && ((dep->direction && dep->flags & DWC3_EP_BUSY) ||
+ (!list_empty(&dep->req_queued) ||
+ !list_empty(&dep->request_list)))) {
+ dev_dbg(dwc->dev, "%s: pending request, cannot halt\n",
+ dep->name);
+ return -EAGAIN;
+ }
+
ret = dwc3_send_gadget_ep_cmd(dwc, dep->number,
DWC3_DEPCMD_SETSTALL, ¶ms);
if (ret)
int ret;
spin_lock_irqsave(&dwc->lock, flags);
-
- if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) {
- dev_err(dwc->dev, "%s is of Isochronous type\n", dep->name);
- ret = -EINVAL;
- goto out;
- }
-
- ret = __dwc3_gadget_ep_set_halt(dep, value);
-out:
+ ret = __dwc3_gadget_ep_set_halt(dep, value, false);
spin_unlock_irqrestore(&dwc->lock, flags);
return ret;
struct dwc3_ep *dep = to_dwc3_ep(ep);
struct dwc3 *dwc = dep->dwc;
unsigned long flags;
+ int ret;
spin_lock_irqsave(&dwc->lock, flags);
dep->flags |= DWC3_EP_WEDGE;
- spin_unlock_irqrestore(&dwc->lock, flags);
if (dep->number == 0 || dep->number == 1)
- return dwc3_gadget_ep0_set_halt(ep, 1);
+ ret = __dwc3_gadget_ep0_set_halt(ep, 1);
else
- return dwc3_gadget_ep_set_halt(ep, 1);
+ ret = __dwc3_gadget_ep_set_halt(dep, 1, false);
+ spin_unlock_irqrestore(&dwc->lock, flags);
+
+ return ret;
}
/* -------------------------------------------------------------------------- */
void dwc3_ep0_interrupt(struct dwc3 *dwc,
const struct dwc3_event_depevt *event);
void dwc3_ep0_out_start(struct dwc3 *dwc);
+int __dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value);
int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value);
int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request,
gfp_t gfp_flags);
-int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value);
+int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value, int protocol);
/**
* dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW
TP_PROTO(struct usb_ctrlrequest *ctrl),
TP_ARGS(ctrl),
TP_STRUCT__entry(
- __field(struct usb_ctrlrequest *, ctrl)
+ __field(__u8, bRequestType)
+ __field(__u8, bRequest)
+ __field(__le16, wValue)
+ __field(__le16, wIndex)
+ __field(__le16, wLength)
),
TP_fast_assign(
- __entry->ctrl = ctrl;
+ __entry->bRequestType = ctrl->bRequestType;
+ __entry->bRequest = ctrl->bRequest;
+ __entry->wValue = ctrl->wValue;
+ __entry->wIndex = ctrl->wIndex;
+ __entry->wLength = ctrl->wLength;
),
TP_printk("bRequestType %02x bRequest %02x wValue %04x wIndex %04x wLength %d",
- __entry->ctrl->bRequestType, __entry->ctrl->bRequest,
- le16_to_cpu(__entry->ctrl->wValue), le16_to_cpu(__entry->ctrl->wIndex),
- le16_to_cpu(__entry->ctrl->wLength)
+ __entry->bRequestType, __entry->bRequest,
+ le16_to_cpu(__entry->wValue), le16_to_cpu(__entry->wIndex),
+ le16_to_cpu(__entry->wLength)
)
);
TP_PROTO(struct dwc3_request *req),
TP_ARGS(req),
TP_STRUCT__entry(
+ __dynamic_array(char, name, DWC3_MSG_MAX)
__field(struct dwc3_request *, req)
+ __field(unsigned, actual)
+ __field(unsigned, length)
+ __field(int, status)
),
TP_fast_assign(
+ snprintf(__get_str(name), DWC3_MSG_MAX, "%s", req->dep->name);
__entry->req = req;
+ __entry->actual = req->request.actual;
+ __entry->length = req->request.length;
+ __entry->status = req->request.status;
),
TP_printk("%s: req %p length %u/%u ==> %d",
- __entry->req->dep->name, __entry->req,
- __entry->req->request.actual, __entry->req->request.length,
- __entry->req->request.status
+ __get_str(name), __entry->req, __entry->actual, __entry->length,
+ __entry->status
)
);
struct dwc3_gadget_ep_cmd_params *params),
TP_ARGS(dep, cmd, params),
TP_STRUCT__entry(
- __field(struct dwc3_ep *, dep)
+ __dynamic_array(char, name, DWC3_MSG_MAX)
__field(unsigned int, cmd)
__field(struct dwc3_gadget_ep_cmd_params *, params)
),
TP_fast_assign(
- __entry->dep = dep;
+ snprintf(__get_str(name), DWC3_MSG_MAX, "%s", dep->name);
__entry->cmd = cmd;
__entry->params = params;
),
TP_printk("%s: cmd '%s' [%d] params %08x %08x %08x\n",
- __entry->dep->name, dwc3_gadget_ep_cmd_string(__entry->cmd),
+ __get_str(name), dwc3_gadget_ep_cmd_string(__entry->cmd),
__entry->cmd, __entry->params->param0,
__entry->params->param1, __entry->params->param2
)
TP_PROTO(struct dwc3_ep *dep, struct dwc3_trb *trb),
TP_ARGS(dep, trb),
TP_STRUCT__entry(
- __field(struct dwc3_ep *, dep)
+ __dynamic_array(char, name, DWC3_MSG_MAX)
__field(struct dwc3_trb *, trb)
+ __field(u32, bpl)
+ __field(u32, bph)
+ __field(u32, size)
+ __field(u32, ctrl)
),
TP_fast_assign(
- __entry->dep = dep;
+ snprintf(__get_str(name), DWC3_MSG_MAX, "%s", dep->name);
__entry->trb = trb;
+ __entry->bpl = trb->bpl;
+ __entry->bph = trb->bph;
+ __entry->size = trb->size;
+ __entry->ctrl = trb->ctrl;
),
TP_printk("%s: trb %p bph %08x bpl %08x size %08x ctrl %08x\n",
- __entry->dep->name, __entry->trb, __entry->trb->bph,
- __entry->trb->bpl, __entry->trb->size, __entry->trb->ctrl
+ __get_str(name), __entry->trb, __entry->bph, __entry->bpl,
+ __entry->size, __entry->ctrl
)
);
usb_ext->bLength = USB_DT_USB_EXT_CAP_SIZE;
usb_ext->bDescriptorType = USB_DT_DEVICE_CAPABILITY;
usb_ext->bDevCapabilityType = USB_CAP_TYPE_EXT;
- usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT);
+ usb_ext->bmAttributes = cpu_to_le32(USB_LPM_SUPPORT | USB_BESL_SUPPORT);
/*
* The Superspeed USB Capability descriptor shall be implemented by all
dev_vdbg(&cdev->gadget->dev,
"reset acm control interface %d\n", intf);
usb_ep_disable(acm->notify);
- } else {
- dev_vdbg(&cdev->gadget->dev,
- "init acm ctrl interface %d\n", intf);
+ }
+
+ if (!acm->notify->desc)
if (config_ep_by_speed(cdev->gadget, f, acm->notify))
return -EINVAL;
- }
+
usb_ep_enable(acm->notify);
acm->notify->driver_data = acm;
return 0;
fail:
- usb_free_all_descriptors(f);
if (eem->port.out_ep)
eem->port.out_ep->driver_data = NULL;
if (eem->port.in_ep)
if (io_data->read && ret > 0) {
int i;
size_t pos = 0;
+
+ /*
+ * Since req->length may be bigger than io_data->len (after
+ * being rounded up to maxpacketsize), we may end up with more
+ * data then user space has space for.
+ */
+ ret = min_t(int, ret, io_data->len);
+
use_mm(io_data->mm);
for (i = 0; i < io_data->nr_segs; i++) {
+ size_t len = min_t(size_t, ret - pos,
+ io_data->iovec[i].iov_len);
+ if (!len)
+ break;
if (unlikely(copy_to_user(io_data->iovec[i].iov_base,
- &io_data->buf[pos],
- io_data->iovec[i].iov_len))) {
+ &io_data->buf[pos], len))) {
ret = -EFAULT;
break;
}
- pos += io_data->iovec[i].iov_len;
+ pos += len;
}
unuse_mm(io_data->mm);
}
struct ffs_epfile *epfile = file->private_data;
struct ffs_ep *ep;
char *data = NULL;
- ssize_t ret, data_len;
+ ssize_t ret, data_len = -EINVAL;
int halt;
/* Are we still active? */
/* Fire the request */
struct usb_request *req;
+ /*
+ * Sanity Check: even though data_len can't be used
+ * uninitialized at the time I write this comment, some
+ * compilers complain about this situation.
+ * In order to keep the code clean from warnings, data_len is
+ * being initialized to -EINVAL during its declaration, which
+ * means we can't rely on compiler anymore to warn no future
+ * changes won't result in data_len being used uninitialized.
+ * For such reason, we're adding this redundant sanity check
+ * here.
+ */
+ if (unlikely(data_len == -EINVAL)) {
+ WARN(1, "%s: data_len == -EINVAL\n", __func__);
+ ret = -EINVAL;
+ goto error_lock;
+ }
+
if (io_data->aio) {
req = usb_ep_alloc_request(ep->ep, GFP_KERNEL);
if (unlikely(!req))
goto error_lock;
req->buf = data;
- req->length = io_data->len;
+ req->length = data_len;
io_data->buf = data;
io_data->ep = ep->ep;
req = ep->req;
req->buf = data;
- req->length = io_data->len;
+ req->length = data_len;
req->context = &done;
req->complete = ffs_epfile_io_complete;
func->conf = c;
func->gadget = c->cdev->gadget;
- ffs_data_get(func->ffs);
-
/*
* in drivers/usb/gadget/configfs.c:configfs_composite_bind()
* configurations are bound in sequence with list_for_each_entry,
dev = MKDEV(major, hidg->minor);
status = cdev_add(&hidg->cdev, dev, 1);
if (status)
- goto fail;
+ goto fail_free_descs;
device_create(hidg_class, NULL, dev, NULL, "%s%d", "hidg", hidg->minor);
return 0;
+fail_free_descs:
+ usb_free_all_descriptors(f);
fail:
ERROR(f->config->cdev, "hidg_bind FAILED\n");
if (hidg->req != NULL) {
usb_ep_free_request(hidg->in_ep, hidg->req);
}
- usb_free_all_descriptors(f);
return status;
}
case 0: /* normal completion? */
if (ep == loop->out_ep) {
- /* loop this OUT packet back IN to the host */
req->zero = (req->actual < req->length);
req->length = req->actual;
- status = usb_ep_queue(loop->in_ep, req, GFP_ATOMIC);
- if (status == 0)
- return;
-
- /* "should never get here" */
- ERROR(cdev, "can't loop %s to %s: %d\n",
- ep->name, loop->in_ep->name,
- status);
}
/* queue the buffer for some later OUT packet */
req->length = buflen;
- status = usb_ep_queue(loop->out_ep, req, GFP_ATOMIC);
+ status = usb_ep_queue(ep, req, GFP_ATOMIC);
if (status == 0)
return;
return alloc_ep_req(ep, len, buflen);
}
-static int
-enable_loopback(struct usb_composite_dev *cdev, struct f_loopback *loop)
+static int enable_endpoint(struct usb_composite_dev *cdev, struct f_loopback *loop,
+ struct usb_ep *ep)
{
- int result = 0;
- struct usb_ep *ep;
struct usb_request *req;
unsigned i;
+ int result;
- /* one endpoint writes data back IN to the host */
- ep = loop->in_ep;
+ /*
+ * one endpoint writes data back IN to the host while another endpoint
+ * just reads OUT packets
+ */
result = config_ep_by_speed(cdev->gadget, &(loop->function), ep);
if (result)
- return result;
+ goto fail0;
result = usb_ep_enable(ep);
if (result < 0)
- return result;
- ep->driver_data = loop;
-
- /* one endpoint just reads OUT packets */
- ep = loop->out_ep;
- result = config_ep_by_speed(cdev->gadget, &(loop->function), ep);
- if (result)
goto fail0;
-
- result = usb_ep_enable(ep);
- if (result < 0) {
-fail0:
- ep = loop->in_ep;
- usb_ep_disable(ep);
- ep->driver_data = NULL;
- return result;
- }
ep->driver_data = loop;
- /* allocate a bunch of read buffers and queue them all at once.
+ /*
+ * allocate a bunch of read buffers and queue them all at once.
* we buffer at most 'qlen' transfers; fewer if any need more
* than 'buflen' bytes each.
*/
for (i = 0; i < qlen && result == 0; i++) {
req = lb_alloc_ep_req(ep, 0);
- if (req) {
- req->complete = loopback_complete;
- result = usb_ep_queue(ep, req, GFP_ATOMIC);
- if (result)
- ERROR(cdev, "%s queue req --> %d\n",
- ep->name, result);
- } else {
- usb_ep_disable(ep);
- ep->driver_data = NULL;
- result = -ENOMEM;
- goto fail0;
+ if (!req)
+ goto fail1;
+
+ req->complete = loopback_complete;
+ result = usb_ep_queue(ep, req, GFP_ATOMIC);
+ if (result) {
+ ERROR(cdev, "%s queue req --> %d\n",
+ ep->name, result);
+ goto fail1;
}
}
+ return 0;
+
+fail1:
+ usb_ep_disable(ep);
+
+fail0:
+ return result;
+}
+
+static int
+enable_loopback(struct usb_composite_dev *cdev, struct f_loopback *loop)
+{
+ int result = 0;
+
+ result = enable_endpoint(cdev, loop, loop->in_ep);
+ if (result)
+ return result;
+
+ result = enable_endpoint(cdev, loop, loop->out_ep);
+ if (result)
+ return result;
+
DBG(cdev, "%s enabled\n", loop->function.name);
return result;
}
return 0;
fail:
- usb_free_all_descriptors(f);
if (ncm->notify_req) {
kfree(ncm->notify_req->buf);
usb_ep_free_request(ncm->notify, ncm->notify_req);
struct gserial port;
u8 ctrl_id;
u8 data_id;
+ u8 cur_alt;
u8 port_num;
u8 can_activate;
};
} else
goto fail;
+ obex->cur_alt = alt;
+
return 0;
fail:
{
struct f_obex *obex = func_to_obex(f);
- if (intf == obex->ctrl_id)
- return 0;
-
- return obex->port.in->driver_data ? 1 : 0;
+ return obex->cur_alt;
}
static void obex_disable(struct usb_function *f)
return 0;
fail:
- usb_free_all_descriptors(f);
/* we might as well release our claims on endpoints */
if (obex->port.out)
obex->port.out->driver_data = NULL;
err_req:
for (i = 0; i < phonet_rxq_size && fp->out_reqv[i]; i++)
usb_ep_free_request(fp->out_ep, fp->out_reqv[i]);
-err:
usb_free_all_descriptors(f);
+err:
if (fp->out_ep)
fp->out_ep->driver_data = NULL;
if (fp->in_ep)
if (rndis->manufacturer && rndis->vendorID &&
rndis_set_param_vendor(rndis->config, rndis->vendorID,
- rndis->manufacturer))
- goto fail;
+ rndis->manufacturer)) {
+ status = -EINVAL;
+ goto fail_free_descs;
+ }
/* NOTE: all that is done without knowing or caring about
* the network link ... which is unavailable to this code
rndis->notify->name);
return 0;
+fail_free_descs:
+ usb_free_all_descriptors(f);
fail:
kfree(f->os_desc_table);
f->os_desc_n = 0;
- usb_free_all_descriptors(f);
if (rndis->notify_req) {
kfree(rndis->notify_req->buf);
return 0;
fail:
- usb_free_all_descriptors(f);
/* we might as well release our claims on endpoints */
if (geth->port.out_ep)
geth->port.out_ep->driver_data = NULL;
return 0;
}
+static void snd_uac2_release(struct device *dev)
+{
+ dev_dbg(dev, "releasing '%s'\n", dev_name(dev));
+}
+
static int alsa_uac2_init(struct audio_dev *agdev)
{
struct snd_uac2_chip *uac2 = &agdev->uac2;
uac2->pdev.id = 0;
uac2->pdev.name = uac2_name;
+ uac2->pdev.dev.release = snd_uac2_release;
/* Register snd_uac2 driver */
err = platform_driver_register(&uac2->pdrv);
.bEndpointAddress = USB_DIR_OUT,
.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
+ .wMaxPacketSize = cpu_to_le16(1023),
.bInterval = 1,
};
.bDescriptorType = USB_DT_ENDPOINT,
.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
+ .wMaxPacketSize = cpu_to_le16(1024),
.bInterval = 4,
};
.bEndpointAddress = USB_DIR_IN,
.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
+ .wMaxPacketSize = cpu_to_le16(1023),
.bInterval = 1,
};
.bDescriptorType = USB_DT_ENDPOINT,
.bmAttributes = USB_ENDPOINT_XFER_ISOC | USB_ENDPOINT_SYNC_ASYNC,
+ .wMaxPacketSize = cpu_to_le16(1024),
.bInterval = 4,
};
struct snd_uac2_chip *uac2 = prm->uac2;
int i;
+ if (!prm->ep_enabled)
+ return;
+
prm->ep_enabled = false;
for (i = 0; i < USB_XFERS; i++) {
prm->rbuf = kzalloc(prm->max_psize * USB_XFERS, GFP_KERNEL);
if (!prm->rbuf) {
prm->max_psize = 0;
- goto err;
+ goto err_free_descs;
}
prm = &agdev->uac2.p_prm;
prm->rbuf = kzalloc(prm->max_psize * USB_XFERS, GFP_KERNEL);
if (!prm->rbuf) {
prm->max_psize = 0;
- goto err;
+ goto err_free_descs;
}
ret = alsa_uac2_init(agdev);
if (ret)
- goto err;
+ goto err_free_descs;
return 0;
+
+err_free_descs:
+ usb_free_all_descriptors(fn);
err:
kfree(agdev->uac2.p_prm.rbuf);
kfree(agdev->uac2.c_prm.rbuf);
- usb_free_all_descriptors(fn);
if (agdev->in_ep)
agdev->in_ep->driver_data = NULL;
if (agdev->out_ep)
else if (interface != uvc->streaming_intf)
return -EINVAL;
else
- return uvc->state == UVC_STATE_STREAMING ? 1 : 0;
+ return uvc->video.ep->driver_data ? 1 : 0;
}
static int
uvc_function_set_alt(struct usb_function *f, unsigned interface, unsigned alt)
{
struct uvc_device *uvc = to_uvc(f);
+ struct usb_composite_dev *cdev = f->config->cdev;
struct v4l2_event v4l2_event;
struct uvc_event *uvc_event = (void *)&v4l2_event.u.data;
int ret;
- INFO(f->config->cdev, "uvc_function_set_alt(%u, %u)\n", interface, alt);
+ INFO(cdev, "uvc_function_set_alt(%u, %u)\n", interface, alt);
if (interface == uvc->control_intf) {
if (alt)
return -EINVAL;
+ if (uvc->control_ep->driver_data) {
+ INFO(cdev, "reset UVC Control\n");
+ usb_ep_disable(uvc->control_ep);
+ uvc->control_ep->driver_data = NULL;
+ }
+
+ if (!uvc->control_ep->desc)
+ if (config_ep_by_speed(cdev->gadget, f, uvc->control_ep))
+ return -EINVAL;
+
+ usb_ep_enable(uvc->control_ep);
+ uvc->control_ep->driver_data = uvc;
+
if (uvc->state == UVC_STATE_DISCONNECTED) {
memset(&v4l2_event, 0, sizeof(v4l2_event));
v4l2_event.type = UVC_EVENT_CONNECT;
- uvc_event->speed = f->config->cdev->gadget->speed;
+ uvc_event->speed = cdev->gadget->speed;
v4l2_event_queue(uvc->vdev, &v4l2_event);
uvc->state = UVC_STATE_CONNECTED;
if (uvc->state != UVC_STATE_STREAMING)
return 0;
- if (uvc->video.ep)
+ if (uvc->video.ep) {
usb_ep_disable(uvc->video.ep);
+ uvc->video.ep->driver_data = NULL;
+ }
memset(&v4l2_event, 0, sizeof(v4l2_event));
v4l2_event.type = UVC_EVENT_STREAMOFF;
if (uvc->state != UVC_STATE_CONNECTED)
return 0;
- if (uvc->video.ep) {
- ret = config_ep_by_speed(f->config->cdev->gadget,
- &(uvc->func), uvc->video.ep);
- if (ret)
- return ret;
- usb_ep_enable(uvc->video.ep);
+ if (!uvc->video.ep)
+ return -EINVAL;
+
+ if (uvc->video.ep->driver_data) {
+ INFO(cdev, "reset UVC\n");
+ usb_ep_disable(uvc->video.ep);
+ uvc->video.ep->driver_data = NULL;
}
+ ret = config_ep_by_speed(f->config->cdev->gadget,
+ &(uvc->func), uvc->video.ep);
+ if (ret)
+ return ret;
+ usb_ep_enable(uvc->video.ep);
+ uvc->video.ep->driver_data = uvc;
+
memset(&v4l2_event, 0, sizeof(v4l2_event));
v4l2_event.type = UVC_EVENT_STREAMON;
v4l2_event_queue(uvc->vdev, &v4l2_event);
v4l2_event_queue(uvc->vdev, &v4l2_event);
uvc->state = UVC_STATE_DISCONNECTED;
+
+ if (uvc->video.ep->driver_data) {
+ usb_ep_disable(uvc->video.ep);
+ uvc->video.ep->driver_data = NULL;
+ }
+
+ if (uvc->control_ep->driver_data) {
+ usb_ep_disable(uvc->control_ep);
+ uvc->control_ep->driver_data = NULL;
+ }
}
/* --------------------------------------------------------------------------
if (!enable) {
for (i = 0; i < UVC_NUM_REQUESTS; ++i)
- usb_ep_dequeue(video->ep, video->req[i]);
+ if (video->req[i])
+ usb_ep_dequeue(video->ep, video->req[i]);
uvc_video_free_requests(video);
uvcg_queue_enable(&video->queue, 0);
case INQUIRY:
case MODE_SENSE:
case MODE_SENSE_10:
- case SERVICE_ACTION_IN:
+ case SERVICE_ACTION_IN_16:
case MAINTENANCE_IN:
case PERSISTENT_RESERVE_IN:
case SECURITY_PROTOCOL_IN:
config USB_GADGET_XILINX
tristate "Xilinx USB Driver"
+ depends on HAS_DMA
depends on OF || COMPILE_TEST
help
USB peripheral controller driver for Xilinx USB2 device.
{
struct usb_udc *udc = container_of(dev, struct usb_udc, dev);
+ if (!udc->driver) {
+ dev_err(dev, "soft-connect without a gadget driver\n");
+ return -EOPNOTSUPP;
+ }
+
if (sysfs_streq(buf, "connect")) {
usb_gadget_udc_start(udc->gadget, udc->driver);
usb_gadget_connect(udc->gadget);
config USB_EHCI_EXYNOS
tristate "EHCI support for Samsung S5P/EXYNOS SoC Series"
- depends on PLAT_S5P || ARCH_EXYNOS
+ depends on ARCH_S5PV210 || ARCH_EXYNOS
help
Enable support for the Samsung Exynos SOC's on-chip EHCI controller.
config USB_OHCI_EXYNOS
tristate "OHCI support for Samsung S5P/EXYNOS SoC Series"
- depends on PLAT_S5P || ARCH_EXYNOS
+ depends on ARCH_S5PV210 || ARCH_EXYNOS
help
Enable support for the Samsung Exynos SOC's on-chip OHCI controller.
wa->wa_descr = wa_descr = (struct usb_wa_descriptor *) hdr;
if (le16_to_cpu(wa_descr->bcdWAVersion) > 0x0100)
dev_warn(dev, "Wire Adapter v%d.%d newer than groked v1.0\n",
- le16_to_cpu(wa_descr->bcdWAVersion) & 0xff00 >> 8,
+ (le16_to_cpu(wa_descr->bcdWAVersion) & 0xff00) >> 8,
le16_to_cpu(wa_descr->bcdWAVersion) & 0x00ff);
result = 0;
error:
#include <linux/slab.h>
-#include <linux/device.h>
#include <asm/unaligned.h>
#include "xhci.h"
* including the USB 3.0 roothub, but only if CONFIG_PM_RUNTIME
* is enabled, so also enable remote wake here.
*/
- if (hcd->self.root_hub->do_remote_wakeup
- && device_may_wakeup(hcd->self.controller)) {
-
+ if (hcd->self.root_hub->do_remote_wakeup) {
if (t1 & PORT_CONNECT) {
t2 |= PORT_WKOC_E | PORT_WKDISC_E;
t2 &= ~PORT_WKCONN_E;
xhci->quirks |= XHCI_SPURIOUS_REBOOT;
xhci->quirks |= XHCI_AVOID_BEI;
}
- if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
- (pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI ||
- pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI)) {
- /* Workaround for occasional spurious wakeups from S5 (or
- * any other sleep) on Haswell machines with LPT and LPT-LP
- * with the new Intel BIOS
- */
- /* Limit the quirk to only known vendors, as this triggers
- * yet another BIOS bug on some other machines
- * https://bugzilla.kernel.org/show_bug.cgi?id=66171
- */
- if (pdev->subsystem_vendor == PCI_VENDOR_ID_HP)
- xhci->quirks |= XHCI_SPURIOUS_WAKEUP;
- }
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) {
xhci->quirks |= XHCI_SPURIOUS_REBOOT;
pdev->device == 0x3432)
xhci->quirks |= XHCI_BROKEN_STREAMS;
+ if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
+ pdev->device == 0x1042)
+ xhci->quirks |= XHCI_BROKEN_STREAMS;
+
if (xhci->quirks & XHCI_RESET_ON_RESUME)
xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
"QUIRK: Resetting on resume");
if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
pdev->no_d3cold = true;
- return xhci_suspend(xhci);
+ return xhci_suspend(xhci, do_wakeup);
}
static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
struct usb_hcd *hcd = dev_get_drvdata(dev);
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
- return xhci_suspend(xhci);
+ /*
+ * xhci_suspend() needs `do_wakeup` to know whether host is allowed
+ * to do wakeup during suspend. Since xhci_plat_suspend is currently
+ * only designed for system suspend, device_may_wakeup() is enough
+ * to dertermine whether host is allowed to do wakeup. Need to
+ * reconsider this when xhci_plat_suspend enlarges its scope, e.g.,
+ * also applies to runtime suspend.
+ */
+ return xhci_suspend(xhci, device_may_wakeup(dev));
}
static int xhci_plat_resume(struct device *dev)
false);
xhci_ring_cmd_db(xhci);
} else {
- /* Clear our internal halted state and restart the ring(s) */
+ /* Clear our internal halted state */
xhci->devs[slot_id]->eps[ep_index].ep_state &= ~EP_HALTED;
- ring_doorbell_for_active_rings(xhci, slot_id, ep_index);
}
}
ep->stopped_td = td;
return 0;
} else {
- if (trb_comp_code == COMP_STALL) {
- /* The transfer is completed from the driver's
- * perspective, but we need to issue a set dequeue
- * command for this stalled endpoint to move the dequeue
- * pointer past the TD. We can't do that here because
- * the halt condition must be cleared first. Let the
- * USB class driver clear the stall later.
- */
- ep->stopped_td = td;
- ep->stopped_stream = ep_ring->stream_id;
- } else if (xhci_requires_manual_halt_cleanup(xhci,
- ep_ctx, trb_comp_code)) {
- /* Other types of errors halt the endpoint, but the
- * class driver doesn't call usb_reset_endpoint() unless
- * the error is -EPIPE. Clear the halted status in the
- * xHCI hardware manually.
+ if (trb_comp_code == COMP_STALL ||
+ xhci_requires_manual_halt_cleanup(xhci, ep_ctx,
+ trb_comp_code)) {
+ /* Issue a reset endpoint command to clear the host side
+ * halt, followed by a set dequeue command to move the
+ * dequeue pointer past the TD.
+ * The class driver clears the device side halt later.
*/
xhci_cleanup_halted_endpoint(xhci,
slot_id, ep_index, ep_ring->stream_id,
else
td->urb->actual_length = 0;
- xhci_cleanup_halted_endpoint(xhci,
- slot_id, ep_index, 0, td, event_trb);
- return finish_td(xhci, td, event_trb, event, ep, status, true);
+ return finish_td(xhci, td, event_trb, event, ep, status, false);
}
/*
* Did we transfer any data, despite the errors that might have
if (ret) {
urb = td->urb;
urb_priv = urb->hcpriv;
- /* Leave the TD around for the reset endpoint function
- * to use(but only if it's not a control endpoint,
- * since we already queued the Set TR dequeue pointer
- * command for stalled control endpoints).
- */
- if (usb_endpoint_xfer_control(&urb->ep->desc) ||
- (trb_comp_code != COMP_STALL &&
- trb_comp_code != COMP_BABBLE))
- xhci_urb_free_priv(xhci, urb_priv);
- else
- kfree(urb_priv);
+
+ xhci_urb_free_priv(xhci, urb_priv);
usb_hcd_unlink_urb_from_ep(bus_to_hcd(urb->dev->bus), urb);
if ((urb->actual_length != urb->transfer_buffer_length &&
#define DRIVER_AUTHOR "Sarah Sharp"
#define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver"
+#define PORT_WAKE_BITS (PORT_WKOC_E | PORT_WKDISC_E | PORT_WKCONN_E)
+
/* Some 0.95 hardware can't handle the chain bit on a Link TRB being cleared */
static int link_quirk;
module_param(link_quirk, int, S_IRUGO | S_IWUSR);
xhci_set_cmd_ring_deq(xhci);
}
+static void xhci_disable_port_wake_on_bits(struct xhci_hcd *xhci)
+{
+ int port_index;
+ __le32 __iomem **port_array;
+ unsigned long flags;
+ u32 t1, t2;
+
+ spin_lock_irqsave(&xhci->lock, flags);
+
+ /* disble usb3 ports Wake bits*/
+ port_index = xhci->num_usb3_ports;
+ port_array = xhci->usb3_ports;
+ while (port_index--) {
+ t1 = readl(port_array[port_index]);
+ t1 = xhci_port_state_to_neutral(t1);
+ t2 = t1 & ~PORT_WAKE_BITS;
+ if (t1 != t2)
+ writel(t2, port_array[port_index]);
+ }
+
+ /* disble usb2 ports Wake bits*/
+ port_index = xhci->num_usb2_ports;
+ port_array = xhci->usb2_ports;
+ while (port_index--) {
+ t1 = readl(port_array[port_index]);
+ t1 = xhci_port_state_to_neutral(t1);
+ t2 = t1 & ~PORT_WAKE_BITS;
+ if (t1 != t2)
+ writel(t2, port_array[port_index]);
+ }
+
+ spin_unlock_irqrestore(&xhci->lock, flags);
+}
+
/*
* Stop HC (not bus-specific)
*
* This is called when the machine transition into S3/S4 mode.
*
*/
-int xhci_suspend(struct xhci_hcd *xhci)
+int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup)
{
int rc = 0;
unsigned int delay = XHCI_MAX_HALT_USEC;
xhci->shared_hcd->state != HC_STATE_SUSPENDED)
return -EINVAL;
+ /* Clear root port wake on bits if wakeup not allowed. */
+ if (!do_wakeup)
+ xhci_disable_port_wake_on_bits(xhci);
+
/* Don't poll the roothubs on bus suspend. */
xhci_dbg(xhci, "%s: stopping port polling.\n", __func__);
clear_bit(HCD_FLAG_POLL_RH, &hcd->flags);
}
}
-/* Deal with stalled endpoints. The core should have sent the control message
- * to clear the halt condition. However, we need to make the xHCI hardware
- * reset its sequence number, since a device will expect a sequence number of
- * zero after the halt condition is cleared.
+/* Called when clearing halted device. The core should have sent the control
+ * message to clear the device halt condition. The host side of the halt should
+ * already be cleared with a reset endpoint command issued when the STALL tx
+ * event was received.
+ *
* Context: in_interrupt
*/
+
void xhci_endpoint_reset(struct usb_hcd *hcd,
struct usb_host_endpoint *ep)
{
struct xhci_hcd *xhci;
- struct usb_device *udev;
- unsigned int ep_index;
- unsigned long flags;
- int ret;
- struct xhci_virt_ep *virt_ep;
- struct xhci_command *command;
xhci = hcd_to_xhci(hcd);
- udev = (struct usb_device *) ep->hcpriv;
- /* Called with a root hub endpoint (or an endpoint that wasn't added
- * with xhci_add_endpoint()
- */
- if (!ep->hcpriv)
- return;
- ep_index = xhci_get_endpoint_index(&ep->desc);
- virt_ep = &xhci->devs[udev->slot_id]->eps[ep_index];
- if (!virt_ep->stopped_td) {
- xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
- "Endpoint 0x%x not halted, refusing to reset.",
- ep->desc.bEndpointAddress);
- return;
- }
- if (usb_endpoint_xfer_control(&ep->desc)) {
- xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
- "Control endpoint stall already handled.");
- return;
- }
- command = xhci_alloc_command(xhci, false, false, GFP_ATOMIC);
- if (!command)
- return;
-
- xhci_dbg_trace(xhci, trace_xhci_dbg_reset_ep,
- "Queueing reset endpoint command");
- spin_lock_irqsave(&xhci->lock, flags);
- ret = xhci_queue_reset_ep(xhci, command, udev->slot_id, ep_index);
/*
- * Can't change the ring dequeue pointer until it's transitioned to the
- * stopped state, which is only upon a successful reset endpoint
- * command. Better hope that last command worked!
+ * We might need to implement the config ep cmd in xhci 4.8.1 note:
+ * The Reset Endpoint Command may only be issued to endpoints in the
+ * Halted state. If software wishes reset the Data Toggle or Sequence
+ * Number of an endpoint that isn't in the Halted state, then software
+ * may issue a Configure Endpoint Command with the Drop and Add bits set
+ * for the target endpoint. that is in the Stopped state.
*/
- if (!ret) {
- xhci_cleanup_stalled_ring(xhci, udev, ep_index);
- kfree(virt_ep->stopped_td);
- xhci_ring_cmd_db(xhci);
- }
- virt_ep->stopped_td = NULL;
- virt_ep->stopped_stream = 0;
- spin_unlock_irqrestore(&xhci->lock, flags);
- if (ret)
- xhci_warn(xhci, "FIXME allocate a new ring segment\n");
+ /* For now just print debug to follow the situation */
+ xhci_dbg(xhci, "Endpoint 0x%x ep reset callback called\n",
+ ep->desc.bEndpointAddress);
}
static int xhci_check_streams_endpoint(struct xhci_hcd *xhci,
void xhci_init_driver(struct hc_driver *drv, int (*setup_fn)(struct usb_hcd *));
#ifdef CONFIG_PM
-int xhci_suspend(struct xhci_hcd *xhci);
+int xhci_suspend(struct xhci_hcd *xhci, bool do_wakeup);
int xhci_resume(struct xhci_hcd *xhci, bool hibernated);
#else
#define xhci_suspend NULL
}
}
- if (!list_empty(&controller->early_tx_list)) {
+ if (!list_empty(&controller->early_tx_list) &&
+ !hrtimer_is_queued(&controller->early_tx)) {
ret = HRTIMER_RESTART;
hrtimer_forward_now(&controller->early_tx,
ktime_set(0, 20 * NSEC_PER_USEC));
struct dsps_glue *glue = dev_get_drvdata(dev);
const struct dsps_musb_wrapper *wrp = glue->wrp;
struct musb *musb = platform_get_drvdata(glue->musb);
- void __iomem *mbase = musb->ctrl_base;
+ void __iomem *mbase;
del_timer_sync(&glue->timer);
+
+ if (!musb)
+ /* This can happen if the musb device is in -EPROBE_DEFER */
+ return 0;
+
+ mbase = musb->ctrl_base;
glue->context.control = dsps_readl(mbase, wrp->control);
glue->context.epintr = dsps_readl(mbase, wrp->epintr_set);
glue->context.coreintr = dsps_readl(mbase, wrp->coreintr_set);
struct dsps_glue *glue = dev_get_drvdata(dev);
const struct dsps_musb_wrapper *wrp = glue->wrp;
struct musb *musb = platform_get_drvdata(glue->musb);
- void __iomem *mbase = musb->ctrl_base;
+ void __iomem *mbase;
+
+ if (!musb)
+ return 0;
+ mbase = musb->ctrl_base;
dsps_writel(mbase, wrp->control, glue->context.control);
dsps_writel(mbase, wrp->epintr_set, glue->context.epintr);
dsps_writel(mbase, wrp->coreintr_set, glue->context.coreintr);
dsps_writel(mbase, wrp->mode, glue->context.mode);
dsps_writel(mbase, wrp->tx_mode, glue->context.tx_mode);
dsps_writel(mbase, wrp->rx_mode, glue->context.rx_mode);
- setup_timer(&glue->timer, otg_timer, (unsigned long) musb);
+ if (musb->xceiv->state == OTG_STATE_B_IDLE &&
+ musb->port_mode == MUSB_PORT_MODE_DUAL_ROLE)
+ mod_timer(&glue->timer, jiffies + wrp->poll_seconds * HZ);
return 0;
}
{ USB_DEVICE(0x10C4, 0x85F8) }, /* Virtenio Preon32 */
{ USB_DEVICE(0x10C4, 0x8664) }, /* AC-Services CAN-IF */
{ USB_DEVICE(0x10C4, 0x8665) }, /* AC-Services OBD-IF */
+ { USB_DEVICE(0x10C4, 0x8875) }, /* CEL MeshConnect USB Stick */
{ USB_DEVICE(0x10C4, 0x88A4) }, /* MMB Networks ZigBee USB Device */
{ USB_DEVICE(0x10C4, 0x88A5) }, /* Planet Innovation Ingeni ZigBee USB Device */
{ USB_DEVICE(0x10C4, 0x8946) }, /* Ketra N1 Wireless Interface */
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
+ { USB_DEVICE(0x1BA4, 0x0002) }, /* Silicon Labs 358x factory default */
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
{ USB_DEVICE(0x1D6F, 0x0010) }, /* Seluxit ApS RF Dongle */
{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
* /sys/bus/usb-serial/drivers/ftdi_sio/new_id and send a patch or report.
*/
static const struct usb_device_id id_table_combined[] = {
+ { USB_DEVICE(FTDI_VID, FTDI_BRICK_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_ZEITCONTROL_TAGTRACE_MIFARE_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CTI_MINI_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_CTI_NANO_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FD_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FE_PID) },
{ USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_01FF_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_4701_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9300_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9301_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9302_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9303_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9304_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9305_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9306_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9307_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9308_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9309_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930A_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930B_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930C_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930D_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930E_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_930F_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9310_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9311_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9312_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9313_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9314_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9315_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9316_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9317_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9318_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_9319_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931A_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931B_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931C_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931D_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931E_PID) },
+ { USB_DEVICE(MTXORB_VID, MTXORB_FTDI_RANGE_931F_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PERLE_ULTRAPORT_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_PIEGROUP_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_TNC_X_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_5_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_6_PID) },
{ USB_DEVICE(FTDI_VID, XSENS_CONVERTER_7_PID) },
+ { USB_DEVICE(XSENS_VID, XSENS_AWINDA_DONGLE_PID) },
+ { USB_DEVICE(XSENS_VID, XSENS_AWINDA_STATION_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_CONVERTER_PID) },
{ USB_DEVICE(XSENS_VID, XSENS_MTW_PID) },
{ USB_DEVICE(FTDI_VID, FTDI_OMNI1509) },
/*** third-party PIDs (using FTDI_VID) ***/
+/*
+ * Certain versions of the official Windows FTDI driver reprogrammed
+ * counterfeit FTDI devices to PID 0. Support these devices anyway.
+ */
+#define FTDI_BRICK_PID 0x0000
+
#define FTDI_LUMEL_PD12_PID 0x6002
/*
* Xsens Technologies BV products (http://www.xsens.com).
*/
#define XSENS_VID 0x2639
-#define XSENS_CONVERTER_PID 0xD00D /* Xsens USB-serial converter */
+#define XSENS_AWINDA_STATION_PID 0x0101
+#define XSENS_AWINDA_DONGLE_PID 0x0102
#define XSENS_MTW_PID 0x0200 /* Xsens MTw */
+#define XSENS_CONVERTER_PID 0xD00D /* Xsens USB-serial converter */
+
+/* Xsens devices using FTDI VID */
#define XSENS_CONVERTER_0_PID 0xD388 /* Xsens USB converter */
#define XSENS_CONVERTER_1_PID 0xD389 /* Xsens Wireless Receiver */
#define XSENS_CONVERTER_2_PID 0xD38A
#define BAYER_CONTOUR_CABLE_PID 0x6001
/*
- * The following are the values for the Matrix Orbital FTDI Range
- * Anything in this range will use an FT232RL.
+ * Matrix Orbital Intelligent USB displays.
+ * http://www.matrixorbital.com
*/
#define MTXORB_VID 0x1B3D
#define MTXORB_FTDI_RANGE_0100_PID 0x0100
#define MTXORB_FTDI_RANGE_01FD_PID 0x01FD
#define MTXORB_FTDI_RANGE_01FE_PID 0x01FE
#define MTXORB_FTDI_RANGE_01FF_PID 0x01FF
-
-
+#define MTXORB_FTDI_RANGE_4701_PID 0x4701
+#define MTXORB_FTDI_RANGE_9300_PID 0x9300
+#define MTXORB_FTDI_RANGE_9301_PID 0x9301
+#define MTXORB_FTDI_RANGE_9302_PID 0x9302
+#define MTXORB_FTDI_RANGE_9303_PID 0x9303
+#define MTXORB_FTDI_RANGE_9304_PID 0x9304
+#define MTXORB_FTDI_RANGE_9305_PID 0x9305
+#define MTXORB_FTDI_RANGE_9306_PID 0x9306
+#define MTXORB_FTDI_RANGE_9307_PID 0x9307
+#define MTXORB_FTDI_RANGE_9308_PID 0x9308
+#define MTXORB_FTDI_RANGE_9309_PID 0x9309
+#define MTXORB_FTDI_RANGE_930A_PID 0x930A
+#define MTXORB_FTDI_RANGE_930B_PID 0x930B
+#define MTXORB_FTDI_RANGE_930C_PID 0x930C
+#define MTXORB_FTDI_RANGE_930D_PID 0x930D
+#define MTXORB_FTDI_RANGE_930E_PID 0x930E
+#define MTXORB_FTDI_RANGE_930F_PID 0x930F
+#define MTXORB_FTDI_RANGE_9310_PID 0x9310
+#define MTXORB_FTDI_RANGE_9311_PID 0x9311
+#define MTXORB_FTDI_RANGE_9312_PID 0x9312
+#define MTXORB_FTDI_RANGE_9313_PID 0x9313
+#define MTXORB_FTDI_RANGE_9314_PID 0x9314
+#define MTXORB_FTDI_RANGE_9315_PID 0x9315
+#define MTXORB_FTDI_RANGE_9316_PID 0x9316
+#define MTXORB_FTDI_RANGE_9317_PID 0x9317
+#define MTXORB_FTDI_RANGE_9318_PID 0x9318
+#define MTXORB_FTDI_RANGE_9319_PID 0x9319
+#define MTXORB_FTDI_RANGE_931A_PID 0x931A
+#define MTXORB_FTDI_RANGE_931B_PID 0x931B
+#define MTXORB_FTDI_RANGE_931C_PID 0x931C
+#define MTXORB_FTDI_RANGE_931D_PID 0x931D
+#define MTXORB_FTDI_RANGE_931E_PID 0x931E
+#define MTXORB_FTDI_RANGE_931F_PID 0x931F
/*
* The Mobility Lab (TML)
if ((data[0] & 0x80) == 0) {
/* no errors on individual bytes, only
possible overrun err */
- if (data[0] & RXERROR_OVERRUN)
- err = TTY_OVERRUN;
- else
- err = 0;
+ if (data[0] & RXERROR_OVERRUN) {
+ tty_insert_flip_char(&port->port, 0,
+ TTY_OVERRUN);
+ }
for (i = 1; i < urb->actual_length ; ++i)
- tty_insert_flip_char(&port->port, data[i], err);
+ tty_insert_flip_char(&port->port, data[i],
+ TTY_NORMAL);
} else {
/* some bytes had errors, every byte has status */
dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__);
for (i = 0; i + 1 < urb->actual_length; i += 2) {
- int stat = data[i], flag = 0;
- if (stat & RXERROR_OVERRUN)
- flag |= TTY_OVERRUN;
- if (stat & RXERROR_FRAMING)
- flag |= TTY_FRAME;
- if (stat & RXERROR_PARITY)
- flag |= TTY_PARITY;
+ int stat = data[i];
+ int flag = TTY_NORMAL;
+
+ if (stat & RXERROR_OVERRUN) {
+ tty_insert_flip_char(&port->port, 0,
+ TTY_OVERRUN);
+ }
/* XXX should handle break (0x10) */
+ if (stat & RXERROR_PARITY)
+ flag = TTY_PARITY;
+ else if (stat & RXERROR_FRAMING)
+ flag = TTY_FRAME;
+
tty_insert_flip_char(&port->port, data[i+1],
flag);
}
} else {
/* some bytes had errors, every byte has status */
for (i = 0; i + 1 < urb->actual_length; i += 2) {
- int stat = data[i], flag = 0;
- if (stat & RXERROR_OVERRUN)
- flag |= TTY_OVERRUN;
- if (stat & RXERROR_FRAMING)
- flag |= TTY_FRAME;
- if (stat & RXERROR_PARITY)
- flag |= TTY_PARITY;
+ int stat = data[i];
+ int flag = TTY_NORMAL;
+
+ if (stat & RXERROR_OVERRUN) {
+ tty_insert_flip_char(&port->port, 0,
+ TTY_OVERRUN);
+ }
/* XXX should handle break (0x10) */
+ if (stat & RXERROR_PARITY)
+ flag = TTY_PARITY;
+ else if (stat & RXERROR_FRAMING)
+ flag = TTY_FRAME;
+
tty_insert_flip_char(&port->port, data[i+1],
flag);
}
*/
for (x = 0; x + 1 < len &&
i + 1 < urb->actual_length; x += 2) {
- int stat = data[i], flag = 0;
+ int stat = data[i];
+ int flag = TTY_NORMAL;
- if (stat & RXERROR_OVERRUN)
- flag |= TTY_OVERRUN;
- if (stat & RXERROR_FRAMING)
- flag |= TTY_FRAME;
- if (stat & RXERROR_PARITY)
- flag |= TTY_PARITY;
+ if (stat & RXERROR_OVERRUN) {
+ tty_insert_flip_char(&port->port, 0,
+ TTY_OVERRUN);
+ }
/* XXX should handle break (0x10) */
+ if (stat & RXERROR_PARITY)
+ flag = TTY_PARITY;
+ else if (stat & RXERROR_FRAMING)
+ flag = TTY_FRAME;
+
tty_insert_flip_char(&port->port, data[i+1],
flag);
i += 2;
if ((data[0] & 0x80) == 0) {
/* no errors on individual bytes, only
possible overrun err*/
- if (data[0] & RXERROR_OVERRUN)
- err = TTY_OVERRUN;
- else
- err = 0;
+ if (data[0] & RXERROR_OVERRUN) {
+ tty_insert_flip_char(&port->port, 0,
+ TTY_OVERRUN);
+ }
for (i = 1; i < urb->actual_length ; ++i)
tty_insert_flip_char(&port->port,
- data[i], err);
+ data[i], TTY_NORMAL);
} else {
/* some bytes had errors, every byte has status */
dev_dbg(&port->dev, "%s - RX error!!!!\n", __func__);
for (i = 0; i + 1 < urb->actual_length; i += 2) {
- int stat = data[i], flag = 0;
- if (stat & RXERROR_OVERRUN)
- flag |= TTY_OVERRUN;
- if (stat & RXERROR_FRAMING)
- flag |= TTY_FRAME;
- if (stat & RXERROR_PARITY)
- flag |= TTY_PARITY;
+ int stat = data[i];
+ int flag = TTY_NORMAL;
+
+ if (stat & RXERROR_OVERRUN) {
+ tty_insert_flip_char(
+ &port->port, 0,
+ TTY_OVERRUN);
+ }
/* XXX should handle break (0x10) */
+ if (stat & RXERROR_PARITY)
+ flag = TTY_PARITY;
+ else if (stat & RXERROR_FRAMING)
+ flag = TTY_FRAME;
+
tty_insert_flip_char(&port->port,
data[i+1], flag);
}
port->interrupt_out_urb->transfer_buffer_length = length;
priv->cur_pos = priv->cur_pos + length;
- result = usb_submit_urb(port->interrupt_out_urb, GFP_NOIO);
+ result = usb_submit_urb(port->interrupt_out_urb,
+ GFP_ATOMIC);
dev_dbg(&port->dev, "%s - Send write URB returns: %i\n", __func__, result);
todo = priv->filled - priv->cur_pos;
if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID ||
priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) {
result = usb_submit_urb(port->interrupt_in_urb,
- GFP_NOIO);
+ GFP_ATOMIC);
dev_dbg(&port->dev, "%s - Send read URB returns: %i\n", __func__, result);
}
}
int result;
int dtr = 0;
int rts = 0;
- unsigned char *transfer_buffer;
- int transfer_buffer_length = 8;
/* FIXME: locking ? */
priv = usb_get_serial_port_data(port);
return -EINVAL;
}
- /* allocate memory for transfer buffer */
- transfer_buffer = kzalloc(transfer_buffer_length, GFP_KERNEL);
- if (!transfer_buffer)
- return -ENOMEM;
-
if (set & TIOCM_RTS)
rts = 1;
if (set & TIOCM_DTR)
KOBIL_TIMEOUT);
}
dev_dbg(dev, "%s - Send set_status_line URB returns: %i\n", __func__, result);
- kfree(transfer_buffer);
return (result < 0) ? result : 0;
}
{
struct usb_serial_port *port = tty->driver_data;
struct kobil_private *priv = usb_get_serial_port_data(port);
- unsigned char *transfer_buffer;
- int transfer_buffer_length = 8;
int result;
if (priv->device_type == KOBIL_USBTWIN_PRODUCT_ID ||
switch (cmd) {
case TCFLSH:
- transfer_buffer = kmalloc(transfer_buffer_length, GFP_KERNEL);
- if (!transfer_buffer)
- return -ENOBUFS;
-
result = usb_control_msg(port->serial->dev,
usb_sndctrlpipe(port->serial->dev, 0),
SUSBCRequest_Misc,
dev_dbg(&port->dev,
"%s - Send reset_all_queues (FLUSH) URB returns: %i\n",
__func__, result);
- kfree(transfer_buffer);
return (result < 0) ? -EIO: 0;
default:
return -ENOIOCTLCMD;
/* The connected devices do not have a bulk write endpoint,
* to transmit data to de barcode device the control endpoint is used */
- dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO);
+ dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC);
if (!dr) {
count = -ENOMEM;
goto error_no_dr;
#define TELIT_PRODUCT_DE910_DUAL 0x1010
#define TELIT_PRODUCT_UE910_V2 0x1012
#define TELIT_PRODUCT_LE920 0x1200
+#define TELIT_PRODUCT_LE910 0x1201
/* ZTE PRODUCTS */
#define ZTE_VENDOR_ID 0x19d2
/* Haier products */
#define HAIER_VENDOR_ID 0x201e
+#define HAIER_PRODUCT_CE81B 0x10f8
#define HAIER_PRODUCT_CE100 0x2009
/* Cinterion (formerly Siemens) products */
.reserved = BIT(3) | BIT(4),
};
+static const struct option_blacklist_info telit_le910_blacklist = {
+ .sendsetup = BIT(0),
+ .reserved = BIT(1) | BIT(2),
+};
+
static const struct option_blacklist_info telit_le920_blacklist = {
.sendsetup = BIT(0),
.reserved = BIT(1) | BIT(5),
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_CC864_SINGLE) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_DE910_DUAL) },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UE910_V2) },
+ { USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
+ .driver_info = (kernel_ulong_t)&telit_le910_blacklist },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE920),
.driver_info = (kernel_ulong_t)&telit_le920_blacklist },
{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
{ USB_DEVICE(LONGCHEER_VENDOR_ID, ZOOM_PRODUCT_4597) },
{ USB_DEVICE(LONGCHEER_VENDOR_ID, IBALL_3_5G_CONNECT) },
{ USB_DEVICE(HAIER_VENDOR_ID, HAIER_PRODUCT_CE100) },
+ { USB_DEVICE_AND_INTERFACE_INFO(HAIER_VENDOR_ID, HAIER_PRODUCT_CE81B, 0xff, 0xff, 0xff) },
/* Pirelli */
{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_1, 0xff) },
{ USB_DEVICE_INTERFACE_CLASS(PIRELLI_VENDOR_ID, PIRELLI_PRODUCT_C100_2, 0xff) },
if (*tty_flag == TTY_NORMAL)
*tty_flag = TTY_FRAME;
}
- if (lsr & UART_LSR_OE){
+ if (lsr & UART_LSR_OE) {
port->icount.overrun++;
- if (*tty_flag == TTY_NORMAL)
- *tty_flag = TTY_OVERRUN;
+ tty_insert_flip_char(&port->port, 0, TTY_OVERRUN);
}
}
if ((len >= 4) &&
(packet[0] == 0x1b) && (packet[1] == 0x1b) &&
((packet[2] == 0x00) || (packet[2] == 0x01))) {
- if (packet[2] == 0x00) {
+ if (packet[2] == 0x00)
ssu100_update_lsr(port, packet[3], &flag);
- if (flag == TTY_OVERRUN)
- tty_insert_flip_char(&port->port, 0,
- TTY_OVERRUN);
- }
if (packet[2] == 0x01)
ssu100_update_msr(port, packet[3]);
unsigned char asc,
unsigned char ascq)
{
- const char *what, *keystr;
+ const char *what, *keystr, *fmt;
keystr = scsi_sense_key_string(key);
- what = scsi_extd_sense_format(asc, ascq);
+ what = scsi_extd_sense_format(asc, ascq, &fmt);
if (keystr == NULL)
keystr = "(Unknown Key)";
what = "(unknown ASC/ASCQ)";
usb_stor_dbg(us, "%s: ", keystr);
- US_DEBUGPX(what, ascq);
- US_DEBUGPX("\n");
+ if (fmt)
+ US_DEBUGPX("%s (%s%x)\n", what, fmt, ascq);
+ else
+ US_DEBUGPX("%s\n", what);
}
int usb_stor_dbg(const struct us_data *us, const char *fmt, ...)
us->iobuf[0] = 0x1;
result = usb_stor_control_msg(us, us->send_ctrl_pipe,
0x0C, USB_RECIP_INTERFACE | USB_TYPE_VENDOR,
- 0x01, 0x0, us->iobuf, 0x1, USB_CTRL_SET_TIMEOUT);
+ 0x01, 0x0, us->iobuf, 0x1, 5 * HZ);
usb_stor_dbg(us, "-- result is %d\n", result);
return 0;
result = usb_stor_control_msg(us, us->send_ctrl_pipe,
USB_REQ_SET_FEATURE,
USB_TYPE_STANDARD | USB_RECIP_DEVICE,
- 0x01, 0x0, NULL, 0x0, 1000);
+ 0x01, 0x0, NULL, 0x0, 1 * HZ);
usb_stor_dbg(us, "Huawei mode set result is %d\n", result);
return 0;
}
return 0;
}
+#ifdef CONFIG_PM
static int config_autodelink_before_power_down(struct us_data *us)
{
struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra);
}
}
}
+#endif
#ifdef CONFIG_REALTEK_AUTOPM
static void fw5895_set_mmc_wp(struct us_data *us)
*/
if (result == USB_STOR_XFER_LONG)
fake_sense = 1;
+
+ /*
+ * Sometimes a device will mistakenly skip the data phase
+ * and go directly to the status phase without sending a
+ * zero-length packet. If we get a 13-byte response here,
+ * check whether it really is a CSW.
+ */
+ if (result == USB_STOR_XFER_SHORT &&
+ srb->sc_data_direction == DMA_FROM_DEVICE &&
+ transfer_length - scsi_get_resid(srb) ==
+ US_BULK_CS_WRAP_LEN) {
+ struct scatterlist *sg = NULL;
+ unsigned int offset = 0;
+
+ if (usb_stor_access_xfer_buf((unsigned char *) bcs,
+ US_BULK_CS_WRAP_LEN, srb, &sg,
+ &offset, FROM_XFER_BUF) ==
+ US_BULK_CS_WRAP_LEN &&
+ bcs->Signature ==
+ cpu_to_le32(US_BULK_CS_SIGN)) {
+ usb_stor_dbg(us, "Device skipped data phase\n");
+ scsi_set_resid(srb, transfer_length);
+ goto skipped_data_phase;
+ }
+ }
}
/* See flow chart on pg 15 of the Bulk Only Transport spec for
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
+ skipped_data_phase:
/* check bulk status */
residue = le32_to_cpu(bcs->Residue);
usb_stor_dbg(us, "Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n",
{
int tag;
- if (blk_rq_tagged(cmnd->request))
+ if (cmnd->flags & SCMD_TAGGED)
tag = cmnd->request->tag + 2;
else
tag = 1;
if (devinfo->flags & US_FL_NO_REPORT_OPCODES)
sdev->no_report_opcodes = 1;
- scsi_set_tag_type(sdev, MSG_ORDERED_TAG);
- scsi_activate_tcq(sdev, devinfo->qdepth - 2);
+ scsi_change_queue_depth(sdev, devinfo->qdepth - 2);
return 0;
}
.sg_tablesize = SG_NONE,
.cmd_per_lun = 1, /* until we override it */
.skip_settle_delay = 1,
- .ordered_tag = 1,
/*
* The uas drivers expects tags not to be bigger than the maximum
* allocator.
*/
.disable_blk_mq = true,
+ .use_blk_tags = 1,
};
#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_ATA_1X),
+/* Reported-by: Hans de Goede <hdegoede@redhat.com> */
+UNUSUAL_DEV(0x0bc2, 0x3320, 0x0000, 0x9999,
+ "Seagate",
+ "Expansion Desk",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
+
+/* Reported-by: Bogdan Mihalcea <bogdan.mihalcea@infim.ro> */
+UNUSUAL_DEV(0x0bc2, 0xa003, 0x0000, 0x9999,
+ "Seagate",
+ "Backup Plus",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
+
/* https://bbs.archlinux.org/viewtopic.php?id=183190 */
UNUSUAL_DEV(0x0bc2, 0xab20, 0x0000, 0x9999,
"Seagate",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_NO_ATA_1X),
+/* https://bbs.archlinux.org/viewtopic.php?id=183190 */
+UNUSUAL_DEV(0x0bc2, 0xab21, 0x0000, 0x9999,
+ "Seagate",
+ "Backup+ BK",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
+
/* Reported-by: Claudio Bizzarri <claudio.bizzarri@gmail.com> */
UNUSUAL_DEV(0x152d, 0x0567, 0x0000, 0x9999,
"JMicron",
"ASM1051",
USB_SC_DEVICE, USB_PR_DEVICE, NULL,
US_FL_IGNORE_UAS),
+
+/* Reported-by: Hans de Goede <hdegoede@redhat.com> */
+UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999,
+ "VIA",
+ "VL711",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_NO_ATA_1X),
+
+/* Reported-by: Hans de Goede <hdegoede@redhat.com> */
+UNUSUAL_DEV(0x4971, 0x1012, 0x0000, 0x9999,
+ "Hitachi",
+ "External HDD",
+ USB_SC_DEVICE, USB_PR_DEVICE, NULL,
+ US_FL_IGNORE_UAS),
vhost_scsi_set_endpoint(struct vhost_scsi *vs,
struct vhost_scsi_target *t)
{
+ struct se_portal_group *se_tpg;
struct tcm_vhost_tport *tv_tport;
struct tcm_vhost_tpg *tpg;
struct tcm_vhost_tpg **vs_tpg;
ret = -EEXIST;
goto out;
}
+ /*
+ * In order to ensure individual vhost-scsi configfs
+ * groups cannot be removed while in use by vhost ioctl,
+ * go ahead and take an explicit se_tpg->tpg_group.cg_item
+ * dependency now.
+ */
+ se_tpg = &tpg->se_tpg;
+ ret = configfs_depend_item(se_tpg->se_tpg_tfo->tf_subsys,
+ &se_tpg->tpg_group.cg_item);
+ if (ret) {
+ pr_warn("configfs_depend_item() failed: %d\n", ret);
+ kfree(vs_tpg);
+ mutex_unlock(&tpg->tv_tpg_mutex);
+ goto out;
+ }
tpg->tv_tpg_vhost_count++;
tpg->vhost_scsi = vs;
vs_tpg[tpg->tport_tpgt] = tpg;
vhost_scsi_clear_endpoint(struct vhost_scsi *vs,
struct vhost_scsi_target *t)
{
+ struct se_portal_group *se_tpg;
struct tcm_vhost_tport *tv_tport;
struct tcm_vhost_tpg *tpg;
struct vhost_virtqueue *vq;
vs->vs_tpg[target] = NULL;
match = true;
mutex_unlock(&tpg->tv_tpg_mutex);
+ /*
+ * Release se_tpg->tpg_group.cg_item configfs dependency now
+ * to allow vhost-scsi WWPN se_tpg->tpg_group shutdown to occur.
+ */
+ se_tpg = &tpg->se_tpg;
+ configfs_undepend_item(se_tpg->se_tpg_tfo->tf_subsys,
+ &se_tpg->tpg_group.cg_item);
}
if (match) {
for (i = 0; i < VHOST_SCSI_MAX_VQ; i++) {
config BACKLIGHT_ATMEL_LCDC
bool "Atmel LCDC Contrast-as-Backlight control"
depends on FB_ATMEL
- default y if MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK || MACH_AT91SAM9263EK
help
This provides a backlight control internal to the Atmel LCDC
driver. If the LCD "contrast control" on your board is wired
return 1;
while ((options = strsep(&this_opt, ",")) != NULL) {
- if (!strncmp(options, "font:", 5))
+ if (!strncmp(options, "font:", 5)) {
strlcpy(fontname, options + 5, sizeof(fontname));
+ continue;
+ }
if (!strncmp(options, "scrollback:", 11)) {
options += 11;
fbcon_softback_size = simple_strtoul(options, &options, 0);
if (*options == 'k' || *options == 'K') {
fbcon_softback_size *= 1024;
- options++;
}
- if (*options != ',')
- return 1;
- options++;
- } else
- return 1;
+ }
+ continue;
}
if (!strncmp(options, "map:", 4)) {
fbcon_map_override();
}
-
- return 1;
+ continue;
}
if (!strncmp(options, "vc:", 3)) {
if (*options++ == '-')
last_fb_vc = simple_strtoul(options, &options, 10) - 1;
fbcon_is_default = 0;
- }
+ continue;
+ }
if (!strncmp(options, "rotate:", 7)) {
options += 7;
initial_rotation = simple_strtoul(options, &options, 0);
if (initial_rotation > 3)
initial_rotation = 0;
+ continue;
}
}
return 1;
static int cursor_size_lastto;
static u32 vgacon_xres;
static u32 vgacon_yres;
-static struct vgastate state;
+static struct vgastate vgastate;
#define BLANK 0x0020
vga_video_num_lines = screen_info.orig_video_lines;
vga_video_num_columns = screen_info.orig_video_cols;
- state.vgabase = NULL;
+ vgastate.vgabase = NULL;
if (screen_info.orig_video_mode == 7) {
/* Monochrome display */
{
int i, j;
- vga_w(state.vgabase, VGA_PEL_MSK, 0xff);
+ vga_w(vgastate.vgabase, VGA_PEL_MSK, 0xff);
for (i = j = 0; i < 16; i++) {
- vga_w(state.vgabase, VGA_PEL_IW, table[i]);
- vga_w(state.vgabase, VGA_PEL_D, vc->vc_palette[j++] >> 2);
- vga_w(state.vgabase, VGA_PEL_D, vc->vc_palette[j++] >> 2);
- vga_w(state.vgabase, VGA_PEL_D, vc->vc_palette[j++] >> 2);
+ vga_w(vgastate.vgabase, VGA_PEL_IW, table[i]);
+ vga_w(vgastate.vgabase, VGA_PEL_D, vc->vc_palette[j++] >> 2);
+ vga_w(vgastate.vgabase, VGA_PEL_D, vc->vc_palette[j++] >> 2);
+ vga_w(vgastate.vgabase, VGA_PEL_D, vc->vc_palette[j++] >> 2);
}
}
switch (blank) {
case 0: /* Unblank */
if (vga_vesa_blanked) {
- vga_vesa_unblank(&state);
+ vga_vesa_unblank(&vgastate);
vga_vesa_blanked = 0;
}
if (vga_palette_blanked) {
case 1: /* Normal blanking */
case -1: /* Obsolete */
if (!mode_switch && vga_video_type == VIDEO_TYPE_VGAC) {
- vga_pal_blank(&state);
+ vga_pal_blank(&vgastate);
vga_palette_blanked = 1;
return 0;
}
return 1;
default: /* VESA blanking */
if (vga_video_type == VIDEO_TYPE_VGAC) {
- vga_vesa_blank(&state, blank - 1);
+ vga_vesa_blank(&vgastate, blank - 1);
vga_vesa_blanked = blank;
}
return 0;
(charcount != 256 && charcount != 512))
return -EINVAL;
- rc = vgacon_do_font_op(&state, font->data, 1, charcount == 512);
+ rc = vgacon_do_font_op(&vgastate, font->data, 1, charcount == 512);
if (rc)
return rc;
font->charcount = vga_512_chars ? 512 : 256;
if (!font->data)
return 0;
- return vgacon_do_font_op(&state, font->data, 0, vga_512_chars);
+ return vgacon_do_font_op(&vgastate, font->data, 0, vga_512_chars);
}
#else
help
This enables support for the AT91/AT32 LCD Controller.
-config FB_INTSRAM
- bool "Frame Buffer in internal SRAM"
- depends on FB_ATMEL && ARCH_AT91SAM9261
- help
- Say Y if you want to map Frame Buffer in internal SRAM. Say N if you want
- to let frame buffer in external SDRAM.
-
-config FB_ATMEL_STN
- bool "Use a STN display with AT91/AT32 LCD Controller"
- depends on FB_ATMEL && (MACH_AT91SAM9261EK || MACH_AT91SAM9G10EK)
- default n
- help
- Say Y if you want to connect a STN LCD display to the AT91/AT32 LCD
- Controller. Say N if you want to connect a TFT.
-
- If unsure, say N.
-
config FB_NVIDIA
tristate "nVidia Framebuffer Support"
depends on FB && PCI
#include <linux/regulator/consumer.h>
#include <video/videomode.h>
-#include <mach/cpu.h>
#include <asm/gpio.h>
#include <video/atmel_lcdc.h>
{},
};
+MODULE_DEVICE_TABLE(of, tvc_of_match);
+
static struct platform_driver tvc_connector_driver = {
.probe = tvc_probe,
.remove = __exit_p(tvc_remove),
.name = "connector-analog-tv",
.owner = THIS_MODULE,
.of_match_table = tvc_of_match,
+ .suppress_bind_attrs = true,
},
};
.name = "connector-dvi",
.owner = THIS_MODULE,
.of_match_table = dvic_of_match,
+ .suppress_bind_attrs = true,
},
};
.name = "connector-hdmi",
.owner = THIS_MODULE,
.of_match_table = hdmic_of_match,
+ .suppress_bind_attrs = true,
},
};
.name = "tfp410",
.owner = THIS_MODULE,
.of_match_table = tfp410_of_match,
+ .suppress_bind_attrs = true,
},
};
.name = "tpd12s015",
.owner = THIS_MODULE,
.of_match_table = tpd_of_match,
+ .suppress_bind_attrs = true,
},
};
.name = "panel-dpi",
.owner = THIS_MODULE,
.of_match_table = panel_dpi_of_match,
+ .suppress_bind_attrs = true,
},
};
.name = "panel-dsi-cm",
.owner = THIS_MODULE,
.of_match_table = dsicm_of_match,
+ .suppress_bind_attrs = true,
},
};
.name = "panel_lgphilips_lb035q02",
.owner = THIS_MODULE,
.of_match_table = lb035q02_of_match,
+ .suppress_bind_attrs = true,
},
};
.owner = THIS_MODULE,
.pm = NEC_8048_PM_OPS,
.of_match_table = nec_8048_of_match,
+ .suppress_bind_attrs = true,
},
.probe = nec_8048_probe,
.remove = nec_8048_remove,
.name = "panel-sharp-ls037v7dw01",
.owner = THIS_MODULE,
.of_match_table = sharp_ls_of_match,
+ .suppress_bind_attrs = true,
},
};
.name = "acx565akm",
.owner = THIS_MODULE,
.of_match_table = acx565akm_of_match,
+ .suppress_bind_attrs = true,
},
.probe = acx565akm_probe,
.remove = acx565akm_remove,
.name = "panel-tpo-td028ttec1",
.owner = THIS_MODULE,
.of_match_table = td028ttec1_of_match,
+ .suppress_bind_attrs = true,
},
};
.owner = THIS_MODULE,
.pm = &tpo_td043_spi_pm,
.of_match_table = tpo_td043_of_match,
+ .suppress_bind_attrs = true,
},
.probe = tpo_td043_probe,
.remove = tpo_td043_remove,
if (!mp->enabled)
goto out;
+ wait_pending_extra_info_updates();
+
if (!mgr_manual_update(mgr))
dispc_mgr_disable_sync(mgr->id);
DUMPREG(i, DISPC_OVL_FIFO_SIZE_STATUS);
DUMPREG(i, DISPC_OVL_ROW_INC);
DUMPREG(i, DISPC_OVL_PIXEL_INC);
+
if (dss_has_feature(FEAT_PRELOAD))
DUMPREG(i, DISPC_OVL_PRELOAD);
+ if (dss_has_feature(FEAT_MFLAG))
+ DUMPREG(i, DISPC_OVL_MFLAG_THRESHOLD);
if (i == OMAP_DSS_GFX) {
DUMPREG(i, DISPC_OVL_WINDOW_SKIP);
}
if (dss_has_feature(FEAT_ATTR2))
DUMPREG(i, DISPC_OVL_ATTRIBUTES2);
- if (dss_has_feature(FEAT_PRELOAD))
- DUMPREG(i, DISPC_OVL_PRELOAD);
- if (dss_has_feature(FEAT_MFLAG))
- DUMPREG(i, DISPC_OVL_MFLAG_THRESHOLD);
}
#undef DISPC_REG
.owner = THIS_MODULE,
.pm = &dispc_pm_ops,
.of_match_table = dispc_of_match,
+ .suppress_bind_attrs = true,
},
};
DISPC_FIR_COEF_V2_OFFSET(n, i))
#define DISPC_OVL_PRELOAD(n) (DISPC_OVL_BASE(n) + \
DISPC_PRELOAD_OFFSET(n))
-#define DISPC_OVL_MFLAG_THRESHOLD(n) (DISPC_OVL_BASE(n) + \
- DISPC_MFLAG_THRESHOLD_OFFSET(n))
+#define DISPC_OVL_MFLAG_THRESHOLD(n) DISPC_MFLAG_THRESHOLD_OFFSET(n)
/* DISPC up/downsampling FIR filter coefficient structure */
struct dispc_coef {
.driver = {
.name = "omapdss_dpi",
.owner = THIS_MODULE,
+ .suppress_bind_attrs = true,
},
};
} else if (dss_has_feature(FEAT_DSI_PLL_SELFREQDCO)) {
f = cinfo->clkin4ddr < 1000000000 ? 0x2 : 0x4;
- l = FLD_MOD(l, f, 4, 1); /* PLL_SELFREQDCO */
+ l = FLD_MOD(l, f, 3, 1); /* PLL_SELFREQDCO */
}
l = FLD_MOD(l, 1, 13, 13); /* DSI_PLL_REFEN */
.owner = THIS_MODULE,
.pm = &dsi_pm_ops,
.of_match_table = dsi_of_match,
+ .suppress_bind_attrs = true,
},
};
.owner = THIS_MODULE,
.pm = &dss_pm_ops,
.of_match_table = dss_of_match,
+ .suppress_bind_attrs = true,
},
};
.owner = THIS_MODULE,
.pm = &hdmi_pm_ops,
.of_match_table = hdmi_of_match,
+ .suppress_bind_attrs = true,
},
};
.owner = THIS_MODULE,
.pm = &hdmi_pm_ops,
.of_match_table = hdmi_of_match,
+ .suppress_bind_attrs = true,
},
};
r = FLD_MOD(r, 0x0, 14, 14); /* PHY_CLKINEN de-assert during locking */
r = FLD_MOD(r, fmt->refsel, 22, 21); /* REFSEL */
- if (fmt->dcofreq) {
- /* divider programming for frequency beyond 1000Mhz */
- REG_FLD_MOD(pll->base, PLLCTRL_CFG3, fmt->regsd, 17, 10);
+ if (fmt->dcofreq)
r = FLD_MOD(r, 0x4, 3, 1); /* 1000MHz and 2000MHz */
- } else {
+ else
r = FLD_MOD(r, 0x2, 3, 1); /* 500MHz and 1000MHz */
- }
hdmi_write_reg(pll->base, PLLCTRL_CFG2, r);
+ REG_FLD_MOD(pll->base, PLLCTRL_CFG3, fmt->regsd, 17, 10);
+
r = hdmi_read_reg(pll->base, PLLCTRL_CFG4);
r = FLD_MOD(r, fmt->regm2, 24, 18);
r = FLD_MOD(r, fmt->regmf, 17, 0);
/* wait for bit change */
if (hdmi_wait_for_bit_change(pll->base, PLLCTRL_PLL_GO,
- 0, 0, 1) != 1) {
- DSSERR("PLL GO bit not set\n");
+ 0, 0, 0) != 0) {
+ DSSERR("PLL GO bit not clearing\n");
return -ETIMEDOUT;
}
.name = "omapdss_rfbi",
.owner = THIS_MODULE,
.pm = &rfbi_pm_ops,
+ .suppress_bind_attrs = true,
},
};
.driver = {
.name = "omapdss_sdi",
.owner = THIS_MODULE,
+ .suppress_bind_attrs = true,
},
};
.owner = THIS_MODULE,
.pm = &venc_pm_ops,
.of_match_table = venc_of_match,
+ .suppress_bind_attrs = true,
},
};
if (fbdev == NULL)
return;
- for (i = 0; i < fbdev->num_fbs; i++) {
- struct omapfb_info *ofbi = FB2OFB(fbdev->fbs[i]);
- int j;
+ for (i = 0; i < fbdev->num_overlays; i++) {
+ struct omap_overlay *ovl = fbdev->overlays[i];
- for (j = 0; j < ofbi->num_overlays; j++) {
- struct omap_overlay *ovl = ofbi->overlays[j];
- ovl->disable(ovl);
- }
+ ovl->disable(ovl);
+
+ if (ovl->manager)
+ ovl->unset_manager(ovl);
}
for (i = 0; i < fbdev->num_fbs; i++)
return r;
}
-static int __exit omapfb_remove(struct platform_device *pdev)
+static int omapfb_remove(struct platform_device *pdev)
{
struct omapfb2_device *fbdev = platform_get_drvdata(pdev);
static struct platform_driver omapfb_driver = {
.probe = omapfb_probe,
- .remove = __exit_p(omapfb_remove),
+ .remove = omapfb_remove,
.driver = {
.name = "omapfb",
.owner = THIS_MODULE,
module_platform_driver(omapfb_driver);
+MODULE_ALIAS("platform:omapfb");
MODULE_AUTHOR("Tomi Valkeinen <tomi.valkeinen@nokia.com>");
MODULE_DESCRIPTION("OMAP2/3 Framebuffer");
MODULE_LICENSE("GPL v2");
static int omap_hdq_probe(struct platform_device *pdev);
static int omap_hdq_remove(struct platform_device *pdev);
+static struct of_device_id omap_hdq_dt_ids[] = {
+ { .compatible = "ti,omap3-1w" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, omap_hdq_dt_ids);
+
static struct platform_driver omap_hdq_driver = {
.probe = omap_hdq_probe,
.remove = omap_hdq_remove,
.driver = {
.name = "omap_hdq",
+ .of_match_table = omap_hdq_dt_ids,
},
};
This driver can also be built as a module. If so, the module
will be called da9055_wdt.
+config DA9063_WATCHDOG
+ tristate "Dialog DA9063 Watchdog"
+ depends on MFD_DA9063
+ select WATCHDOG_CORE
+ help
+ Support for the watchdog in the DA9063 PMIC.
+
+ This driver can be built as a module. The module name is da9063_wdt.
+
config GPIO_WATCHDOG
tristate "Watchdog device controlled through GPIO-line"
depends on OF_GPIO
config XILINX_WATCHDOG
tristate "Xilinx Watchdog timer"
+ depends on HAS_IOMEM
select WATCHDOG_CORE
help
Watchdog driver for the xps_timebase_wdt ip core.
config AT91RM9200_WATCHDOG
tristate "AT91RM9200 watchdog"
- depends on ARCH_AT91RM9200
+ depends on SOC_AT91RM9200
help
Watchdog timer embedded into AT91RM9200 chips. This will reboot your
system when the timeout is reached.
config AT91SAM9X_WATCHDOG
tristate "AT91SAM9X / AT91CAP9 watchdog"
- depends on ARCH_AT91 && !ARCH_AT91RM9200
+ depends on ARCH_AT91
select WATCHDOG_CORE
help
Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will
reboot your system when the timeout is reached.
+config CADENCE_WATCHDOG
+ tristate "Cadence Watchdog Timer"
+ depends on ARM
+ select WATCHDOG_CORE
+ help
+ Say Y here if you want to include support for the watchdog
+ timer in the Xilinx Zynq.
+
config 21285_WATCHDOG
tristate "DC21285 watchdog"
depends on FOOTBRIDGE
To compile this driver as a module, choose M here: the
module will be called orion_wdt.
+config RN5T618_WATCHDOG
+ tristate "Ricoh RN5T618 watchdog"
+ depends on MFD_RN5T618
+ select WATCHDOG_CORE
+ help
+ If you say yes here you get support for watchdog on the Ricoh
+ RN5T618 PMIC.
+
+ This driver can also be built as a module. If so, the module
+ will be called rn5t618_wdt.
+
config SUNXI_WATCHDOG
tristate "Allwinner SoCs watchdog support"
depends on ARCH_SUNXI
config TEGRA_WATCHDOG
tristate "Tegra watchdog"
- depends on ARCH_TEGRA || COMPILE_TEST
+ depends on (ARCH_TEGRA || COMPILE_TEST) && HAS_IOMEM
select WATCHDOG_CORE
help
Say Y here to include support for the watchdog timer
To compile this driver as a module, choose M here: the
module will be called tegra_wdt.
+config QCOM_WDT
+ tristate "QCOM watchdog"
+ depends on HAS_IOMEM
+ depends on ARCH_QCOM
+ select WATCHDOG_CORE
+ help
+ Say Y here to include Watchdog timer support for the watchdog found
+ on QCOM chipsets. Currently supported targets are the MSM8960,
+ APQ8064, and IPQ8064.
+
+ To compile this driver as a module, choose M here: the
+ module will be called qcom_wdt.
+
+config MESON_WATCHDOG
+ tristate "Amlogic Meson SoCs watchdog support"
+ depends on ARCH_MESON
+ select WATCHDOG_CORE
+ help
+ Say Y here to include support for the watchdog timer
+ in Amlogic Meson SoCs.
+ To compile this driver as a module, choose M here: the
+ module will be called meson_wdt.
+
# AVR32 Architecture
config AT32AP700X_WDT
obj-$(CONFIG_ARM_SP805_WATCHDOG) += sp805_wdt.o
obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o
obj-$(CONFIG_AT91SAM9X_WATCHDOG) += at91sam9_wdt.o
+obj-$(CONFIG_CADENCE_WATCHDOG) += cadence_wdt.o
obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
obj-$(CONFIG_TWL4030_WATCHDOG) += twl4030_wdt.o
obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
obj-$(CONFIG_DAVINCI_WATCHDOG) += davinci_wdt.o
obj-$(CONFIG_ORION_WATCHDOG) += orion_wdt.o
obj-$(CONFIG_SUNXI_WATCHDOG) += sunxi_wdt.o
+obj-$(CONFIG_RN5T618_WATCHDOG) += rn5t618_wdt.o
obj-$(CONFIG_COH901327_WATCHDOG) += coh901327_wdt.o
obj-$(CONFIG_STMP3XXX_RTC_WATCHDOG) += stmp3xxx_rtc_wdt.o
obj-$(CONFIG_NUC900_WATCHDOG) += nuc900_wdt.o
obj-$(CONFIG_BCM2835_WDT) += bcm2835_wdt.o
obj-$(CONFIG_MOXART_WDT) += moxart_wdt.o
obj-$(CONFIG_SIRFSOC_WATCHDOG) += sirfsoc_wdt.o
+obj-$(CONFIG_QCOM_WDT) += qcom-wdt.o
obj-$(CONFIG_BCM_KONA_WDT) += bcm_kona_wdt.o
obj-$(CONFIG_TEGRA_WATCHDOG) += tegra_wdt.o
+obj-$(CONFIG_MESON_WATCHDOG) += meson_wdt.o
# AVR32 Architecture
obj-$(CONFIG_AT32AP700X_WDT) += at32ap700x_wdt.o
# Architecture Independent
obj-$(CONFIG_DA9052_WATCHDOG) += da9052_wdt.o
obj-$(CONFIG_DA9055_WATCHDOG) += da9055_wdt.o
+obj-$(CONFIG_DA9063_WATCHDOG) += da9063_wdt.o
obj-$(CONFIG_GPIO_WATCHDOG) += gpio_wdt.o
obj-$(CONFIG_WM831X_WATCHDOG) += wm831x_wdt.o
obj-$(CONFIG_WM8350_WATCHDOG) += wm8350_wdt.o
* occur, and the final time the board will reset.
*/
-u32 booke_wdt_enabled;
-u32 booke_wdt_period = CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT;
#ifdef CONFIG_PPC_FSL_BOOK3E
#define WDTP(x) ((((x)&0x3)<<30)|(((x)&0x3c)<<15))
#define WDTP_MASK (TCR_WP_MASK)
#endif
-/* Checks wdt=x and wdt_period=xx command-line option */
-notrace int __init early_parse_wdt(char *p)
-{
- if (p && strncmp(p, "0", 1) != 0)
- booke_wdt_enabled = 1;
-
- return 0;
-}
-early_param("wdt", early_parse_wdt);
-
-int __init early_parse_wdt_period(char *p)
-{
- unsigned long ret;
- if (p) {
- if (!kstrtol(p, 0, &ret))
- booke_wdt_period = ret;
- }
-
- return 0;
-}
-early_param("wdt_period", early_parse_wdt_period);
+static bool booke_wdt_enabled;
+module_param(booke_wdt_enabled, bool, 0);
+static int booke_wdt_period = CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT;
+module_param(booke_wdt_period, int, 0);
#ifdef CONFIG_PPC_FSL_BOOK3E
module_init(booke_wdt_init);
module_exit(booke_wdt_exit);
+MODULE_ALIAS("booke_wdt");
MODULE_DESCRIPTION("PowerPC Book-E watchdog driver");
MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Cadence WDT driver - Used by Xilinx Zynq
+ *
+ * Copyright (C) 2010 - 2014 Xilinx, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/watchdog.h>
+
+#define CDNS_WDT_DEFAULT_TIMEOUT 10
+/* Supports 1 - 516 sec */
+#define CDNS_WDT_MIN_TIMEOUT 1
+#define CDNS_WDT_MAX_TIMEOUT 516
+
+/* Restart key */
+#define CDNS_WDT_RESTART_KEY 0x00001999
+
+/* Counter register access key */
+#define CDNS_WDT_REGISTER_ACCESS_KEY 0x00920000
+
+/* Counter value divisor */
+#define CDNS_WDT_COUNTER_VALUE_DIVISOR 0x1000
+
+/* Clock prescaler value and selection */
+#define CDNS_WDT_PRESCALE_64 64
+#define CDNS_WDT_PRESCALE_512 512
+#define CDNS_WDT_PRESCALE_4096 4096
+#define CDNS_WDT_PRESCALE_SELECT_64 1
+#define CDNS_WDT_PRESCALE_SELECT_512 2
+#define CDNS_WDT_PRESCALE_SELECT_4096 3
+
+/* Input clock frequency */
+#define CDNS_WDT_CLK_10MHZ 10000000
+#define CDNS_WDT_CLK_75MHZ 75000000
+
+/* Counter maximum value */
+#define CDNS_WDT_COUNTER_MAX 0xFFF
+
+static int wdt_timeout = CDNS_WDT_DEFAULT_TIMEOUT;
+static int nowayout = WATCHDOG_NOWAYOUT;
+
+module_param(wdt_timeout, int, 0);
+MODULE_PARM_DESC(wdt_timeout,
+ "Watchdog time in seconds. (default="
+ __MODULE_STRING(CDNS_WDT_DEFAULT_TIMEOUT) ")");
+
+module_param(nowayout, int, 0);
+MODULE_PARM_DESC(nowayout,
+ "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+/**
+ * struct cdns_wdt - Watchdog device structure
+ * @regs: baseaddress of device
+ * @rst: reset flag
+ * @clk: struct clk * of a clock source
+ * @prescaler: for saving prescaler value
+ * @ctrl_clksel: counter clock prescaler selection
+ * @io_lock: spinlock for IO register access
+ * @cdns_wdt_device: watchdog device structure
+ * @cdns_wdt_notifier: notifier structure
+ *
+ * Structure containing parameters specific to cadence watchdog.
+ */
+struct cdns_wdt {
+ void __iomem *regs;
+ bool rst;
+ struct clk *clk;
+ u32 prescaler;
+ u32 ctrl_clksel;
+ spinlock_t io_lock;
+ struct watchdog_device cdns_wdt_device;
+ struct notifier_block cdns_wdt_notifier;
+};
+
+/* Write access to Registers */
+static inline void cdns_wdt_writereg(struct cdns_wdt *wdt, u32 offset, u32 val)
+{
+ writel_relaxed(val, wdt->regs + offset);
+}
+
+/*************************Register Map**************************************/
+
+/* Register Offsets for the WDT */
+#define CDNS_WDT_ZMR_OFFSET 0x0 /* Zero Mode Register */
+#define CDNS_WDT_CCR_OFFSET 0x4 /* Counter Control Register */
+#define CDNS_WDT_RESTART_OFFSET 0x8 /* Restart Register */
+#define CDNS_WDT_SR_OFFSET 0xC /* Status Register */
+
+/*
+ * Zero Mode Register - This register controls how the time out is indicated
+ * and also contains the access code to allow writes to the register (0xABC).
+ */
+#define CDNS_WDT_ZMR_WDEN_MASK 0x00000001 /* Enable the WDT */
+#define CDNS_WDT_ZMR_RSTEN_MASK 0x00000002 /* Enable the reset output */
+#define CDNS_WDT_ZMR_IRQEN_MASK 0x00000004 /* Enable IRQ output */
+#define CDNS_WDT_ZMR_RSTLEN_16 0x00000030 /* Reset pulse of 16 pclk cycles */
+#define CDNS_WDT_ZMR_ZKEY_VAL 0x00ABC000 /* Access key, 0xABC << 12 */
+/*
+ * Counter Control register - This register controls how fast the timer runs
+ * and the reset value and also contains the access code to allow writes to
+ * the register.
+ */
+#define CDNS_WDT_CCR_CRV_MASK 0x00003FFC /* Counter reset value */
+
+/**
+ * cdns_wdt_stop - Stop the watchdog.
+ *
+ * @wdd: watchdog device
+ *
+ * Read the contents of the ZMR register, clear the WDEN bit
+ * in the register and set the access key for successful write.
+ *
+ * Return: always 0
+ */
+static int cdns_wdt_stop(struct watchdog_device *wdd)
+{
+ struct cdns_wdt *wdt = watchdog_get_drvdata(wdd);
+
+ spin_lock(&wdt->io_lock);
+ cdns_wdt_writereg(wdt, CDNS_WDT_ZMR_OFFSET,
+ CDNS_WDT_ZMR_ZKEY_VAL & (~CDNS_WDT_ZMR_WDEN_MASK));
+ spin_unlock(&wdt->io_lock);
+
+ return 0;
+}
+
+/**
+ * cdns_wdt_reload - Reload the watchdog timer (i.e. pat the watchdog).
+ *
+ * @wdd: watchdog device
+ *
+ * Write the restart key value (0x00001999) to the restart register.
+ *
+ * Return: always 0
+ */
+static int cdns_wdt_reload(struct watchdog_device *wdd)
+{
+ struct cdns_wdt *wdt = watchdog_get_drvdata(wdd);
+
+ spin_lock(&wdt->io_lock);
+ cdns_wdt_writereg(wdt, CDNS_WDT_RESTART_OFFSET,
+ CDNS_WDT_RESTART_KEY);
+ spin_unlock(&wdt->io_lock);
+
+ return 0;
+}
+
+/**
+ * cdns_wdt_start - Enable and start the watchdog.
+ *
+ * @wdd: watchdog device
+ *
+ * The counter value is calculated according to the formula:
+ * calculated count = (timeout * clock) / prescaler + 1.
+ * The calculated count is divided by 0x1000 to obtain the field value
+ * to write to counter control register.
+ * Clears the contents of prescaler and counter reset value. Sets the
+ * prescaler to 4096 and the calculated count and access key
+ * to write to CCR Register.
+ * Sets the WDT (WDEN bit) and either the Reset signal(RSTEN bit)
+ * or Interrupt signal(IRQEN) with a specified cycles and the access
+ * key to write to ZMR Register.
+ *
+ * Return: always 0
+ */
+static int cdns_wdt_start(struct watchdog_device *wdd)
+{
+ struct cdns_wdt *wdt = watchdog_get_drvdata(wdd);
+ unsigned int data = 0;
+ unsigned short count;
+ unsigned long clock_f = clk_get_rate(wdt->clk);
+
+ /*
+ * Counter value divisor to obtain the value of
+ * counter reset to be written to control register.
+ */
+ count = (wdd->timeout * (clock_f / wdt->prescaler)) /
+ CDNS_WDT_COUNTER_VALUE_DIVISOR + 1;
+
+ if (count > CDNS_WDT_COUNTER_MAX)
+ count = CDNS_WDT_COUNTER_MAX;
+
+ spin_lock(&wdt->io_lock);
+ cdns_wdt_writereg(wdt, CDNS_WDT_ZMR_OFFSET,
+ CDNS_WDT_ZMR_ZKEY_VAL);
+
+ count = (count << 2) & CDNS_WDT_CCR_CRV_MASK;
+
+ /* Write counter access key first to be able write to register */
+ data = count | CDNS_WDT_REGISTER_ACCESS_KEY | wdt->ctrl_clksel;
+ cdns_wdt_writereg(wdt, CDNS_WDT_CCR_OFFSET, data);
+ data = CDNS_WDT_ZMR_WDEN_MASK | CDNS_WDT_ZMR_RSTLEN_16 |
+ CDNS_WDT_ZMR_ZKEY_VAL;
+
+ /* Reset on timeout if specified in device tree. */
+ if (wdt->rst) {
+ data |= CDNS_WDT_ZMR_RSTEN_MASK;
+ data &= ~CDNS_WDT_ZMR_IRQEN_MASK;
+ } else {
+ data &= ~CDNS_WDT_ZMR_RSTEN_MASK;
+ data |= CDNS_WDT_ZMR_IRQEN_MASK;
+ }
+ cdns_wdt_writereg(wdt, CDNS_WDT_ZMR_OFFSET, data);
+ cdns_wdt_writereg(wdt, CDNS_WDT_RESTART_OFFSET,
+ CDNS_WDT_RESTART_KEY);
+ spin_unlock(&wdt->io_lock);
+
+ return 0;
+}
+
+/**
+ * cdns_wdt_settimeout - Set a new timeout value for the watchdog device.
+ *
+ * @wdd: watchdog device
+ * @new_time: new timeout value that needs to be set
+ * Return: 0 on success
+ *
+ * Update the watchdog_device timeout with new value which is used when
+ * cdns_wdt_start is called.
+ */
+static int cdns_wdt_settimeout(struct watchdog_device *wdd,
+ unsigned int new_time)
+{
+ wdd->timeout = new_time;
+
+ return cdns_wdt_start(wdd);
+}
+
+/**
+ * cdns_wdt_irq_handler - Notifies of watchdog timeout.
+ *
+ * @irq: interrupt number
+ * @dev_id: pointer to a platform device structure
+ * Return: IRQ_HANDLED
+ *
+ * The handler is invoked when the watchdog times out and a
+ * reset on timeout has not been enabled.
+ */
+static irqreturn_t cdns_wdt_irq_handler(int irq, void *dev_id)
+{
+ struct platform_device *pdev = dev_id;
+
+ dev_info(&pdev->dev,
+ "Watchdog timed out. Internal reset not enabled\n");
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Info structure used to indicate the features supported by the device
+ * to the upper layers. This is defined in watchdog.h header file.
+ */
+static struct watchdog_info cdns_wdt_info = {
+ .identity = "cdns_wdt watchdog",
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
+ WDIOF_MAGICCLOSE,
+};
+
+/* Watchdog Core Ops */
+static struct watchdog_ops cdns_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = cdns_wdt_start,
+ .stop = cdns_wdt_stop,
+ .ping = cdns_wdt_reload,
+ .set_timeout = cdns_wdt_settimeout,
+};
+
+/**
+ * cdns_wdt_notify_sys - Notifier for reboot or shutdown.
+ *
+ * @this: handle to notifier block
+ * @code: turn off indicator
+ * @unused: unused
+ * Return: NOTIFY_DONE
+ *
+ * This notifier is invoked whenever the system reboot or shutdown occur
+ * because we need to disable the WDT before system goes down as WDT might
+ * reset on the next boot.
+ */
+static int cdns_wdt_notify_sys(struct notifier_block *this, unsigned long code,
+ void *unused)
+{
+ struct cdns_wdt *wdt = container_of(this, struct cdns_wdt,
+ cdns_wdt_notifier);
+ if (code == SYS_DOWN || code == SYS_HALT)
+ cdns_wdt_stop(&wdt->cdns_wdt_device);
+
+ return NOTIFY_DONE;
+}
+
+/************************Platform Operations*****************************/
+/**
+ * cdns_wdt_probe - Probe call for the device.
+ *
+ * @pdev: handle to the platform device structure.
+ * Return: 0 on success, negative error otherwise.
+ *
+ * It does all the memory allocation and registration for the device.
+ */
+static int cdns_wdt_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ int ret, irq;
+ unsigned long clock_f;
+ struct cdns_wdt *wdt;
+ struct watchdog_device *cdns_wdt_device;
+
+ wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+ if (!wdt)
+ return -ENOMEM;
+
+ cdns_wdt_device = &wdt->cdns_wdt_device;
+ cdns_wdt_device->info = &cdns_wdt_info;
+ cdns_wdt_device->ops = &cdns_wdt_ops;
+ cdns_wdt_device->timeout = CDNS_WDT_DEFAULT_TIMEOUT;
+ cdns_wdt_device->min_timeout = CDNS_WDT_MIN_TIMEOUT;
+ cdns_wdt_device->max_timeout = CDNS_WDT_MAX_TIMEOUT;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ wdt->regs = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(wdt->regs))
+ return PTR_ERR(wdt->regs);
+
+ /* Register the interrupt */
+ wdt->rst = of_property_read_bool(pdev->dev.of_node, "reset-on-timeout");
+ irq = platform_get_irq(pdev, 0);
+ if (!wdt->rst && irq >= 0) {
+ ret = devm_request_irq(&pdev->dev, irq, cdns_wdt_irq_handler, 0,
+ pdev->name, pdev);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "cannot register interrupt handler err=%d\n",
+ ret);
+ return ret;
+ }
+ }
+
+ /* Initialize the members of cdns_wdt structure */
+ cdns_wdt_device->parent = &pdev->dev;
+
+ ret = watchdog_init_timeout(cdns_wdt_device, wdt_timeout, &pdev->dev);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to set timeout value\n");
+ return ret;
+ }
+
+ watchdog_set_nowayout(cdns_wdt_device, nowayout);
+ watchdog_set_drvdata(cdns_wdt_device, wdt);
+
+ wdt->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(wdt->clk)) {
+ dev_err(&pdev->dev, "input clock not found\n");
+ ret = PTR_ERR(wdt->clk);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(wdt->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "unable to enable clock\n");
+ return ret;
+ }
+
+ clock_f = clk_get_rate(wdt->clk);
+ if (clock_f <= CDNS_WDT_CLK_75MHZ) {
+ wdt->prescaler = CDNS_WDT_PRESCALE_512;
+ wdt->ctrl_clksel = CDNS_WDT_PRESCALE_SELECT_512;
+ } else {
+ wdt->prescaler = CDNS_WDT_PRESCALE_4096;
+ wdt->ctrl_clksel = CDNS_WDT_PRESCALE_SELECT_4096;
+ }
+
+ spin_lock_init(&wdt->io_lock);
+
+ wdt->cdns_wdt_notifier.notifier_call = &cdns_wdt_notify_sys;
+ ret = register_reboot_notifier(&wdt->cdns_wdt_notifier);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "cannot register reboot notifier err=%d)\n",
+ ret);
+ goto err_clk_disable;
+ }
+
+ ret = watchdog_register_device(cdns_wdt_device);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register wdt device\n");
+ goto err_clk_disable;
+ }
+ platform_set_drvdata(pdev, wdt);
+
+ dev_dbg(&pdev->dev, "Xilinx Watchdog Timer at %p with timeout %ds%s\n",
+ wdt->regs, cdns_wdt_device->timeout,
+ nowayout ? ", nowayout" : "");
+
+ return 0;
+
+err_clk_disable:
+ clk_disable_unprepare(wdt->clk);
+
+ return ret;
+}
+
+/**
+ * cdns_wdt_remove - Probe call for the device.
+ *
+ * @pdev: handle to the platform device structure.
+ * Return: 0 on success, otherwise negative error.
+ *
+ * Unregister the device after releasing the resources.
+ */
+static int cdns_wdt_remove(struct platform_device *pdev)
+{
+ struct cdns_wdt *wdt = platform_get_drvdata(pdev);
+
+ cdns_wdt_stop(&wdt->cdns_wdt_device);
+ watchdog_unregister_device(&wdt->cdns_wdt_device);
+ unregister_reboot_notifier(&wdt->cdns_wdt_notifier);
+ clk_disable_unprepare(wdt->clk);
+
+ return 0;
+}
+
+/**
+ * cdns_wdt_shutdown - Stop the device.
+ *
+ * @pdev: handle to the platform structure.
+ *
+ */
+static void cdns_wdt_shutdown(struct platform_device *pdev)
+{
+ struct cdns_wdt *wdt = platform_get_drvdata(pdev);
+
+ cdns_wdt_stop(&wdt->cdns_wdt_device);
+ clk_disable_unprepare(wdt->clk);
+}
+
+/**
+ * cdns_wdt_suspend - Stop the device.
+ *
+ * @dev: handle to the device structure.
+ * Return: 0 always.
+ */
+static int __maybe_unused cdns_wdt_suspend(struct device *dev)
+{
+ struct platform_device *pdev = container_of(dev,
+ struct platform_device, dev);
+ struct cdns_wdt *wdt = platform_get_drvdata(pdev);
+
+ cdns_wdt_stop(&wdt->cdns_wdt_device);
+ clk_disable_unprepare(wdt->clk);
+
+ return 0;
+}
+
+/**
+ * cdns_wdt_resume - Resume the device.
+ *
+ * @dev: handle to the device structure.
+ * Return: 0 on success, errno otherwise.
+ */
+static int __maybe_unused cdns_wdt_resume(struct device *dev)
+{
+ int ret;
+ struct platform_device *pdev = container_of(dev,
+ struct platform_device, dev);
+ struct cdns_wdt *wdt = platform_get_drvdata(pdev);
+
+ ret = clk_prepare_enable(wdt->clk);
+ if (ret) {
+ dev_err(dev, "unable to enable clock\n");
+ return ret;
+ }
+ cdns_wdt_start(&wdt->cdns_wdt_device);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(cdns_wdt_pm_ops, cdns_wdt_suspend, cdns_wdt_resume);
+
+static struct of_device_id cdns_wdt_of_match[] = {
+ { .compatible = "cdns,wdt-r1p2", },
+ { /* end of table */ }
+};
+MODULE_DEVICE_TABLE(of, cdns_wdt_of_match);
+
+/* Driver Structure */
+static struct platform_driver cdns_wdt_driver = {
+ .probe = cdns_wdt_probe,
+ .remove = cdns_wdt_remove,
+ .shutdown = cdns_wdt_shutdown,
+ .driver = {
+ .name = "cdns-wdt",
+ .owner = THIS_MODULE,
+ .of_match_table = cdns_wdt_of_match,
+ .pm = &cdns_wdt_pm_ops,
+ },
+};
+
+module_platform_driver(cdns_wdt_driver);
+
+MODULE_AUTHOR("Xilinx, Inc.");
+MODULE_DESCRIPTION("Watchdog driver for Cadence WDT");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * Watchdog driver for DA9063 PMICs.
+ *
+ * Copyright(c) 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: Mariusz Wojtasik <mariusz.wojtasik@diasemi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/watchdog.h>
+#include <linux/platform_device.h>
+#include <linux/uaccess.h>
+#include <linux/slab.h>
+#include <linux/delay.h>
+#include <linux/mfd/da9063/registers.h>
+#include <linux/mfd/da9063/core.h>
+#include <linux/regmap.h>
+
+/*
+ * Watchdog selector to timeout in seconds.
+ * 0: WDT disabled;
+ * others: timeout = 2048 ms * 2^(TWDSCALE-1).
+ */
+static const unsigned int wdt_timeout[] = { 0, 2, 4, 8, 16, 32, 65, 131 };
+#define DA9063_TWDSCALE_DISABLE 0
+#define DA9063_TWDSCALE_MIN 1
+#define DA9063_TWDSCALE_MAX (ARRAY_SIZE(wdt_timeout) - 1)
+#define DA9063_WDT_MIN_TIMEOUT wdt_timeout[DA9063_TWDSCALE_MIN]
+#define DA9063_WDT_MAX_TIMEOUT wdt_timeout[DA9063_TWDSCALE_MAX]
+#define DA9063_WDG_TIMEOUT wdt_timeout[3]
+
+struct da9063_watchdog {
+ struct da9063 *da9063;
+ struct watchdog_device wdtdev;
+};
+
+static unsigned int da9063_wdt_timeout_to_sel(unsigned int secs)
+{
+ unsigned int i;
+
+ for (i = DA9063_TWDSCALE_MIN; i <= DA9063_TWDSCALE_MAX; i++) {
+ if (wdt_timeout[i] >= secs)
+ return i;
+ }
+
+ return DA9063_TWDSCALE_MAX;
+}
+
+static int _da9063_wdt_set_timeout(struct da9063 *da9063, unsigned int regval)
+{
+ return regmap_update_bits(da9063->regmap, DA9063_REG_CONTROL_D,
+ DA9063_TWDSCALE_MASK, regval);
+}
+
+static int da9063_wdt_start(struct watchdog_device *wdd)
+{
+ struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
+ unsigned int selector;
+ int ret;
+
+ selector = da9063_wdt_timeout_to_sel(wdt->wdtdev.timeout);
+ ret = _da9063_wdt_set_timeout(wdt->da9063, selector);
+ if (ret)
+ dev_err(wdt->da9063->dev, "Watchdog failed to start (err = %d)\n",
+ ret);
+
+ return ret;
+}
+
+static int da9063_wdt_stop(struct watchdog_device *wdd)
+{
+ struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
+ int ret;
+
+ ret = regmap_update_bits(wdt->da9063->regmap, DA9063_REG_CONTROL_D,
+ DA9063_TWDSCALE_MASK, DA9063_TWDSCALE_DISABLE);
+ if (ret)
+ dev_alert(wdt->da9063->dev, "Watchdog failed to stop (err = %d)\n",
+ ret);
+
+ return ret;
+}
+
+static int da9063_wdt_ping(struct watchdog_device *wdd)
+{
+ struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
+ int ret;
+
+ ret = regmap_write(wdt->da9063->regmap, DA9063_REG_CONTROL_F,
+ DA9063_WATCHDOG);
+ if (ret)
+ dev_alert(wdt->da9063->dev, "Failed to ping the watchdog (err = %d)\n",
+ ret);
+
+ return ret;
+}
+
+static int da9063_wdt_set_timeout(struct watchdog_device *wdd,
+ unsigned int timeout)
+{
+ struct da9063_watchdog *wdt = watchdog_get_drvdata(wdd);
+ unsigned int selector;
+ int ret;
+
+ selector = da9063_wdt_timeout_to_sel(timeout);
+ ret = _da9063_wdt_set_timeout(wdt->da9063, selector);
+ if (ret)
+ dev_err(wdt->da9063->dev, "Failed to set watchdog timeout (err = %d)\n",
+ ret);
+ else
+ wdd->timeout = wdt_timeout[selector];
+
+ return ret;
+}
+
+static const struct watchdog_info da9063_watchdog_info = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING,
+ .identity = "DA9063 Watchdog",
+};
+
+static const struct watchdog_ops da9063_watchdog_ops = {
+ .owner = THIS_MODULE,
+ .start = da9063_wdt_start,
+ .stop = da9063_wdt_stop,
+ .ping = da9063_wdt_ping,
+ .set_timeout = da9063_wdt_set_timeout,
+};
+
+static int da9063_wdt_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct da9063 *da9063;
+ struct da9063_watchdog *wdt;
+
+ if (!pdev->dev.parent)
+ return -EINVAL;
+
+ da9063 = dev_get_drvdata(pdev->dev.parent);
+ if (!da9063)
+ return -EINVAL;
+
+ wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+ if (!wdt)
+ return -ENOMEM;
+
+ wdt->da9063 = da9063;
+
+ wdt->wdtdev.info = &da9063_watchdog_info;
+ wdt->wdtdev.ops = &da9063_watchdog_ops;
+ wdt->wdtdev.min_timeout = DA9063_WDT_MIN_TIMEOUT;
+ wdt->wdtdev.max_timeout = DA9063_WDT_MAX_TIMEOUT;
+ wdt->wdtdev.timeout = DA9063_WDG_TIMEOUT;
+
+ wdt->wdtdev.status = WATCHDOG_NOWAYOUT_INIT_STATUS;
+
+ watchdog_set_drvdata(&wdt->wdtdev, wdt);
+ dev_set_drvdata(&pdev->dev, wdt);
+
+ ret = watchdog_register_device(&wdt->wdtdev);
+
+ return ret;
+}
+
+static int da9063_wdt_remove(struct platform_device *pdev)
+{
+ struct da9063_watchdog *wdt = dev_get_drvdata(&pdev->dev);
+
+ watchdog_unregister_device(&wdt->wdtdev);
+
+ return 0;
+}
+
+static struct platform_driver da9063_wdt_driver = {
+ .probe = da9063_wdt_probe,
+ .remove = da9063_wdt_remove,
+ .driver = {
+ .name = DA9063_DRVNAME_WATCHDOG,
+ },
+};
+module_platform_driver(da9063_wdt_driver);
+
+MODULE_AUTHOR("Mariusz Wojtasik <mariusz.wojtasik@diasemi.com>");
+MODULE_DESCRIPTION("Watchdog driver for Dialog DA9063");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DA9063_DRVNAME_WATCHDOG);
#include <linux/bitops.h>
#include <linux/clk.h>
+#include <linux/delay.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/fs.h>
#include <linux/miscdevice.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/notifier.h>
#include <linux/of.h>
#include <linux/pm.h>
#include <linux/platform_device.h>
+#include <linux/reboot.h>
#include <linux/spinlock.h>
#include <linux/timer.h>
#include <linux/uaccess.h>
#define WDOG_CONTROL_REG_OFFSET 0x00
#define WDOG_CONTROL_REG_WDT_EN_MASK 0x01
#define WDOG_TIMEOUT_RANGE_REG_OFFSET 0x04
+#define WDOG_TIMEOUT_RANGE_TOPINIT_SHIFT 4
#define WDOG_CURRENT_COUNT_REG_OFFSET 0x08
#define WDOG_COUNTER_RESTART_REG_OFFSET 0x0c
#define WDOG_COUNTER_RESTART_KICK_VALUE 0x76
unsigned long next_heartbeat;
struct timer_list timer;
int expect_close;
+ struct notifier_block restart_handler;
} dw_wdt;
static inline int dw_wdt_is_enabled(void)
}
/* Set the new value in the watchdog. */
- writel(top_val, dw_wdt.regs + WDOG_TIMEOUT_RANGE_REG_OFFSET);
+ writel(top_val | top_val << WDOG_TIMEOUT_RANGE_TOPINIT_SHIFT,
+ dw_wdt.regs + WDOG_TIMEOUT_RANGE_REG_OFFSET);
dw_wdt_set_next_heartbeat();
WDOG_COUNTER_RESTART_REG_OFFSET);
}
+static int dw_wdt_restart_handle(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ u32 val;
+
+ writel(0, dw_wdt.regs + WDOG_TIMEOUT_RANGE_REG_OFFSET);
+ val = readl(dw_wdt.regs + WDOG_CONTROL_REG_OFFSET);
+ if (val & WDOG_CONTROL_REG_WDT_EN_MASK)
+ writel(WDOG_COUNTER_RESTART_KICK_VALUE, dw_wdt.regs +
+ WDOG_COUNTER_RESTART_REG_OFFSET);
+ else
+ writel(WDOG_CONTROL_REG_WDT_EN_MASK,
+ dw_wdt.regs + WDOG_CONTROL_REG_OFFSET);
+
+ /* wait for reset to assert... */
+ mdelay(500);
+
+ return NOTIFY_DONE;
+}
+
static void dw_wdt_ping(unsigned long data)
{
if (time_before(jiffies, dw_wdt.next_heartbeat) ||
if (ret)
goto out_disable_clk;
+ dw_wdt.restart_handler.notifier_call = dw_wdt_restart_handle;
+ dw_wdt.restart_handler.priority = 128;
+ ret = register_restart_handler(&dw_wdt.restart_handler);
+ if (ret)
+ pr_warn("cannot register restart handler\n");
+
dw_wdt_set_next_heartbeat();
setup_timer(&dw_wdt.timer, dw_wdt_ping, 0);
mod_timer(&dw_wdt.timer, jiffies + WDT_TIMEOUT);
static int dw_wdt_drv_remove(struct platform_device *pdev)
{
+ unregister_restart_handler(&dw_wdt.restart_handler);
+
misc_deregister(&dw_wdt_miscdev);
clk_disable_unprepare(dw_wdt.clk);
*/
#include <linux/clk.h>
+#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
+#include <linux/notifier.h>
#include <linux/of_address.h>
#include <linux/platform_device.h>
+#include <linux/reboot.h>
#include <linux/regmap.h>
#include <linux/timer.h>
#include <linux/watchdog.h>
struct regmap *regmap;
struct timer_list timer; /* Pings the watchdog when closed */
struct watchdog_device wdog;
+ struct notifier_block restart_handler;
};
static bool nowayout = WATCHDOG_NOWAYOUT;
.options = WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE,
};
+static int imx2_restart_handler(struct notifier_block *this, unsigned long mode,
+ void *cmd)
+{
+ unsigned int wcr_enable = IMX2_WDT_WCR_WDE;
+ struct imx2_wdt_device *wdev = container_of(this,
+ struct imx2_wdt_device,
+ restart_handler);
+ /* Assert SRS signal */
+ regmap_write(wdev->regmap, 0, wcr_enable);
+ /*
+ * Due to imx6q errata ERR004346 (WDOG: WDOG SRS bit requires to be
+ * written twice), we add another two writes to ensure there must be at
+ * least two writes happen in the same one 32kHz clock period. We save
+ * the target check here, since the writes shouldn't be a huge burden
+ * for other platforms.
+ */
+ regmap_write(wdev->regmap, 0, wcr_enable);
+ regmap_write(wdev->regmap, 0, wcr_enable);
+
+ /* wait for reset to assert... */
+ mdelay(500);
+
+ return NOTIFY_DONE;
+}
+
static inline void imx2_wdt_setup(struct watchdog_device *wdog)
{
struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
static int __init imx2_wdt_probe(struct platform_device *pdev)
{
- struct device_node *np = pdev->dev.of_node;
struct imx2_wdt_device *wdev;
struct watchdog_device *wdog;
struct resource *res;
void __iomem *base;
- bool big_endian;
int ret;
u32 val;
if (!wdev)
return -ENOMEM;
- big_endian = of_property_read_bool(np, "big-endian");
- if (big_endian)
- imx2_wdt_regmap_config.val_format_endian = REGMAP_ENDIAN_BIG;
-
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(base))
return ret;
}
+ wdev->restart_handler.notifier_call = imx2_restart_handler;
+ wdev->restart_handler.priority = 128;
+ ret = register_restart_handler(&wdev->restart_handler);
+ if (ret)
+ dev_err(&pdev->dev, "cannot register restart handler\n");
+
dev_info(&pdev->dev, "timeout %d sec (nowayout=%d)\n",
wdog->timeout, nowayout);
struct watchdog_device *wdog = platform_get_drvdata(pdev);
struct imx2_wdt_device *wdev = watchdog_get_drvdata(wdog);
+ unregister_restart_handler(&wdev->restart_handler);
+
watchdog_unregister_device(wdog);
if (imx2_wdt_is_running(wdev)) {
--- /dev/null
+/*
+ * Meson Watchdog Driver
+ *
+ * Copyright (c) 2014 Carlo Caione
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 2 of the License, or (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/notifier.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/types.h>
+#include <linux/watchdog.h>
+
+#define DRV_NAME "meson_wdt"
+
+#define MESON_WDT_TC 0x00
+#define MESON_WDT_TC_EN BIT(22)
+#define MESON_WDT_TC_TM_MASK 0x3fffff
+#define MESON_WDT_DC_RESET (3 << 24)
+
+#define MESON_WDT_RESET 0x04
+
+#define MESON_WDT_TIMEOUT 30
+#define MESON_WDT_MIN_TIMEOUT 1
+#define MESON_WDT_MAX_TIMEOUT (MESON_WDT_TC_TM_MASK / 100000)
+
+#define MESON_SEC_TO_TC(s) ((s) * 100000)
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+static unsigned int timeout = MESON_WDT_TIMEOUT;
+
+struct meson_wdt_dev {
+ struct watchdog_device wdt_dev;
+ void __iomem *wdt_base;
+ struct notifier_block restart_handler;
+};
+
+static int meson_restart_handle(struct notifier_block *this, unsigned long mode,
+ void *cmd)
+{
+ u32 tc_reboot = MESON_WDT_DC_RESET | MESON_WDT_TC_EN;
+ struct meson_wdt_dev *meson_wdt = container_of(this,
+ struct meson_wdt_dev,
+ restart_handler);
+
+ while (1) {
+ writel(tc_reboot, meson_wdt->wdt_base + MESON_WDT_TC);
+ mdelay(5);
+ }
+
+ return NOTIFY_DONE;
+}
+
+static int meson_wdt_ping(struct watchdog_device *wdt_dev)
+{
+ struct meson_wdt_dev *meson_wdt = watchdog_get_drvdata(wdt_dev);
+
+ writel(0, meson_wdt->wdt_base + MESON_WDT_RESET);
+
+ return 0;
+}
+
+static void meson_wdt_change_timeout(struct watchdog_device *wdt_dev,
+ unsigned int timeout)
+{
+ struct meson_wdt_dev *meson_wdt = watchdog_get_drvdata(wdt_dev);
+ u32 reg;
+
+ reg = readl(meson_wdt->wdt_base + MESON_WDT_TC);
+ reg &= ~MESON_WDT_TC_TM_MASK;
+ reg |= MESON_SEC_TO_TC(timeout);
+ writel(reg, meson_wdt->wdt_base + MESON_WDT_TC);
+}
+
+static int meson_wdt_set_timeout(struct watchdog_device *wdt_dev,
+ unsigned int timeout)
+{
+ wdt_dev->timeout = timeout;
+
+ meson_wdt_change_timeout(wdt_dev, timeout);
+ meson_wdt_ping(wdt_dev);
+
+ return 0;
+}
+
+static int meson_wdt_stop(struct watchdog_device *wdt_dev)
+{
+ struct meson_wdt_dev *meson_wdt = watchdog_get_drvdata(wdt_dev);
+ u32 reg;
+
+ reg = readl(meson_wdt->wdt_base + MESON_WDT_TC);
+ reg &= ~MESON_WDT_TC_EN;
+ writel(reg, meson_wdt->wdt_base + MESON_WDT_TC);
+
+ return 0;
+}
+
+static int meson_wdt_start(struct watchdog_device *wdt_dev)
+{
+ struct meson_wdt_dev *meson_wdt = watchdog_get_drvdata(wdt_dev);
+ u32 reg;
+
+ meson_wdt_change_timeout(wdt_dev, meson_wdt->wdt_dev.timeout);
+ meson_wdt_ping(wdt_dev);
+
+ reg = readl(meson_wdt->wdt_base + MESON_WDT_TC);
+ reg |= MESON_WDT_TC_EN;
+ writel(reg, meson_wdt->wdt_base + MESON_WDT_TC);
+
+ return 0;
+}
+
+static const struct watchdog_info meson_wdt_info = {
+ .identity = DRV_NAME,
+ .options = WDIOF_SETTIMEOUT |
+ WDIOF_KEEPALIVEPING |
+ WDIOF_MAGICCLOSE,
+};
+
+static const struct watchdog_ops meson_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = meson_wdt_start,
+ .stop = meson_wdt_stop,
+ .ping = meson_wdt_ping,
+ .set_timeout = meson_wdt_set_timeout,
+};
+
+static int meson_wdt_probe(struct platform_device *pdev)
+{
+ struct resource *res;
+ struct meson_wdt_dev *meson_wdt;
+ int err;
+
+ meson_wdt = devm_kzalloc(&pdev->dev, sizeof(*meson_wdt), GFP_KERNEL);
+ if (!meson_wdt)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ meson_wdt->wdt_base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(meson_wdt->wdt_base))
+ return PTR_ERR(meson_wdt->wdt_base);
+
+ meson_wdt->wdt_dev.parent = &pdev->dev;
+ meson_wdt->wdt_dev.info = &meson_wdt_info;
+ meson_wdt->wdt_dev.ops = &meson_wdt_ops;
+ meson_wdt->wdt_dev.timeout = MESON_WDT_TIMEOUT;
+ meson_wdt->wdt_dev.max_timeout = MESON_WDT_MAX_TIMEOUT;
+ meson_wdt->wdt_dev.min_timeout = MESON_WDT_MIN_TIMEOUT;
+
+ watchdog_set_drvdata(&meson_wdt->wdt_dev, meson_wdt);
+
+ watchdog_init_timeout(&meson_wdt->wdt_dev, timeout, &pdev->dev);
+ watchdog_set_nowayout(&meson_wdt->wdt_dev, nowayout);
+
+ meson_wdt_stop(&meson_wdt->wdt_dev);
+
+ err = watchdog_register_device(&meson_wdt->wdt_dev);
+ if (err)
+ return err;
+
+ platform_set_drvdata(pdev, meson_wdt);
+
+ meson_wdt->restart_handler.notifier_call = meson_restart_handle;
+ meson_wdt->restart_handler.priority = 128;
+ err = register_restart_handler(&meson_wdt->restart_handler);
+ if (err)
+ dev_err(&pdev->dev,
+ "cannot register restart handler (err=%d)\n", err);
+
+ dev_info(&pdev->dev, "Watchdog enabled (timeout=%d sec, nowayout=%d)",
+ meson_wdt->wdt_dev.timeout, nowayout);
+
+ return 0;
+}
+
+static int meson_wdt_remove(struct platform_device *pdev)
+{
+ struct meson_wdt_dev *meson_wdt = platform_get_drvdata(pdev);
+
+ unregister_restart_handler(&meson_wdt->restart_handler);
+
+ watchdog_unregister_device(&meson_wdt->wdt_dev);
+
+ return 0;
+}
+
+static void meson_wdt_shutdown(struct platform_device *pdev)
+{
+ struct meson_wdt_dev *meson_wdt = platform_get_drvdata(pdev);
+
+ meson_wdt_stop(&meson_wdt->wdt_dev);
+}
+
+static const struct of_device_id meson_wdt_dt_ids[] = {
+ { .compatible = "amlogic,meson6-wdt" },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, meson_wdt_dt_ids);
+
+static struct platform_driver meson_wdt_driver = {
+ .probe = meson_wdt_probe,
+ .remove = meson_wdt_remove,
+ .shutdown = meson_wdt_shutdown,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRV_NAME,
+ .of_match_table = meson_wdt_dt_ids,
+ },
+};
+
+module_platform_driver(meson_wdt_driver);
+
+module_param(timeout, uint, 0);
+MODULE_PARM_DESC(timeout, "Watchdog heartbeat in seconds");
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout,
+ "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
+MODULE_DESCRIPTION("Meson Watchdog Timer Driver");
.probe = xwdt_probe,
.remove = xwdt_remove,
.driver = {
- .owner = THIS_MODULE,
.name = WATCHDOG_NAME,
.of_match_table = xwdt_of_match,
},
return 0;
}
+static int armada375_wdt_clock_init(struct platform_device *pdev,
+ struct orion_watchdog *dev)
+{
+ int ret;
+
+ dev->clk = of_clk_get_by_name(pdev->dev.of_node, "fixed");
+ if (!IS_ERR(dev->clk)) {
+ ret = clk_prepare_enable(dev->clk);
+ if (ret) {
+ clk_put(dev->clk);
+ return ret;
+ }
+
+ atomic_io_modify(dev->reg + TIMER_CTRL,
+ WDT_AXP_FIXED_ENABLE_BIT,
+ WDT_AXP_FIXED_ENABLE_BIT);
+ dev->clk_rate = clk_get_rate(dev->clk);
+
+ return 0;
+ }
+
+ /* Mandatory fallback for proper devicetree backward compatibility */
+ dev->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(dev->clk))
+ return PTR_ERR(dev->clk);
+
+ ret = clk_prepare_enable(dev->clk);
+ if (ret) {
+ clk_put(dev->clk);
+ return ret;
+ }
+
+ atomic_io_modify(dev->reg + TIMER_CTRL,
+ WDT_A370_RATIO_MASK(WDT_A370_RATIO_SHIFT),
+ WDT_A370_RATIO_MASK(WDT_A370_RATIO_SHIFT));
+ dev->clk_rate = clk_get_rate(dev->clk) / WDT_A370_RATIO;
+
+ return 0;
+}
+
static int armadaxp_wdt_clock_init(struct platform_device *pdev,
struct orion_watchdog *dev)
{
.rstout_mask_bit = BIT(10),
.wdt_enable_bit = BIT(8),
.wdt_counter_offset = 0x34,
- .clock_init = armada370_wdt_clock_init,
+ .clock_init = armada375_wdt_clock_init,
.enabled = armada375_enabled,
.start = armada375_start,
.stop = armada375_stop,
--- /dev/null
+/* Copyright (c) 2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/reboot.h>
+#include <linux/watchdog.h>
+
+#define WDT_RST 0x0
+#define WDT_EN 0x8
+#define WDT_BITE_TIME 0x24
+
+struct qcom_wdt {
+ struct watchdog_device wdd;
+ struct clk *clk;
+ unsigned long rate;
+ struct notifier_block restart_nb;
+ void __iomem *base;
+};
+
+static inline
+struct qcom_wdt *to_qcom_wdt(struct watchdog_device *wdd)
+{
+ return container_of(wdd, struct qcom_wdt, wdd);
+}
+
+static int qcom_wdt_start(struct watchdog_device *wdd)
+{
+ struct qcom_wdt *wdt = to_qcom_wdt(wdd);
+
+ writel(0, wdt->base + WDT_EN);
+ writel(1, wdt->base + WDT_RST);
+ writel(wdd->timeout * wdt->rate, wdt->base + WDT_BITE_TIME);
+ writel(1, wdt->base + WDT_EN);
+ return 0;
+}
+
+static int qcom_wdt_stop(struct watchdog_device *wdd)
+{
+ struct qcom_wdt *wdt = to_qcom_wdt(wdd);
+
+ writel(0, wdt->base + WDT_EN);
+ return 0;
+}
+
+static int qcom_wdt_ping(struct watchdog_device *wdd)
+{
+ struct qcom_wdt *wdt = to_qcom_wdt(wdd);
+
+ writel(1, wdt->base + WDT_RST);
+ return 0;
+}
+
+static int qcom_wdt_set_timeout(struct watchdog_device *wdd,
+ unsigned int timeout)
+{
+ wdd->timeout = timeout;
+ return qcom_wdt_start(wdd);
+}
+
+static const struct watchdog_ops qcom_wdt_ops = {
+ .start = qcom_wdt_start,
+ .stop = qcom_wdt_stop,
+ .ping = qcom_wdt_ping,
+ .set_timeout = qcom_wdt_set_timeout,
+ .owner = THIS_MODULE,
+};
+
+static const struct watchdog_info qcom_wdt_info = {
+ .options = WDIOF_KEEPALIVEPING
+ | WDIOF_MAGICCLOSE
+ | WDIOF_SETTIMEOUT,
+ .identity = KBUILD_MODNAME,
+};
+
+static int qcom_wdt_restart(struct notifier_block *nb, unsigned long action,
+ void *data)
+{
+ struct qcom_wdt *wdt = container_of(nb, struct qcom_wdt, restart_nb);
+ u32 timeout;
+
+ /*
+ * Trigger watchdog bite:
+ * Setup BITE_TIME to be 128ms, and enable WDT.
+ */
+ timeout = 128 * wdt->rate / 1000;
+
+ writel(0, wdt->base + WDT_EN);
+ writel(1, wdt->base + WDT_RST);
+ writel(timeout, wdt->base + WDT_BITE_TIME);
+ writel(1, wdt->base + WDT_EN);
+
+ /*
+ * Actually make sure the above sequence hits hardware before sleeping.
+ */
+ wmb();
+
+ msleep(150);
+ return NOTIFY_DONE;
+}
+
+static int qcom_wdt_probe(struct platform_device *pdev)
+{
+ struct qcom_wdt *wdt;
+ struct resource *res;
+ int ret;
+
+ wdt = devm_kzalloc(&pdev->dev, sizeof(*wdt), GFP_KERNEL);
+ if (!wdt)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ wdt->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(wdt->base))
+ return PTR_ERR(wdt->base);
+
+ wdt->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(wdt->clk)) {
+ dev_err(&pdev->dev, "failed to get input clock\n");
+ return PTR_ERR(wdt->clk);
+ }
+
+ ret = clk_prepare_enable(wdt->clk);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to setup clock\n");
+ return ret;
+ }
+
+ /*
+ * We use the clock rate to calculate the max timeout, so ensure it's
+ * not zero to avoid a divide-by-zero exception.
+ *
+ * WATCHDOG_CORE assumes units of seconds, if the WDT is clocked such
+ * that it would bite before a second elapses it's usefulness is
+ * limited. Bail if this is the case.
+ */
+ wdt->rate = clk_get_rate(wdt->clk);
+ if (wdt->rate == 0 ||
+ wdt->rate > 0x10000000U) {
+ dev_err(&pdev->dev, "invalid clock rate\n");
+ ret = -EINVAL;
+ goto err_clk_unprepare;
+ }
+
+ wdt->wdd.dev = &pdev->dev;
+ wdt->wdd.info = &qcom_wdt_info;
+ wdt->wdd.ops = &qcom_wdt_ops;
+ wdt->wdd.min_timeout = 1;
+ wdt->wdd.max_timeout = 0x10000000U / wdt->rate;
+
+ /*
+ * If 'timeout-sec' unspecified in devicetree, assume a 30 second
+ * default, unless the max timeout is less than 30 seconds, then use
+ * the max instead.
+ */
+ wdt->wdd.timeout = min(wdt->wdd.max_timeout, 30U);
+ watchdog_init_timeout(&wdt->wdd, 0, &pdev->dev);
+
+ ret = watchdog_register_device(&wdt->wdd);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register watchdog\n");
+ goto err_clk_unprepare;
+ }
+
+ /*
+ * WDT restart notifier has priority 0 (use as a last resort)
+ */
+ wdt->restart_nb.notifier_call = qcom_wdt_restart;
+ ret = register_restart_handler(&wdt->restart_nb);
+ if (ret)
+ dev_err(&pdev->dev, "failed to setup restart handler\n");
+
+ platform_set_drvdata(pdev, wdt);
+ return 0;
+
+err_clk_unprepare:
+ clk_disable_unprepare(wdt->clk);
+ return ret;
+}
+
+static int qcom_wdt_remove(struct platform_device *pdev)
+{
+ struct qcom_wdt *wdt = platform_get_drvdata(pdev);
+
+ unregister_restart_handler(&wdt->restart_nb);
+ watchdog_unregister_device(&wdt->wdd);
+ clk_disable_unprepare(wdt->clk);
+ return 0;
+}
+
+static const struct of_device_id qcom_wdt_of_table[] = {
+ { .compatible = "qcom,kpss-wdt-msm8960", },
+ { .compatible = "qcom,kpss-wdt-apq8064", },
+ { .compatible = "qcom,kpss-wdt-ipq8064", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, qcom_wdt_of_table);
+
+static struct platform_driver qcom_watchdog_driver = {
+ .probe = qcom_wdt_probe,
+ .remove = qcom_wdt_remove,
+ .driver = {
+ .name = KBUILD_MODNAME,
+ .of_match_table = qcom_wdt_of_table,
+ },
+};
+module_platform_driver(qcom_watchdog_driver);
+
+MODULE_DESCRIPTION("QCOM KPSS Watchdog Driver");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+/*
+ * Watchdog driver for Ricoh RN5T618 PMIC
+ *
+ * Copyright (C) 2014 Beniamino Galvani <b.galvani@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include <linux/device.h>
+#include <linux/mfd/rn5t618.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/watchdog.h>
+
+#define DRIVER_NAME "rn5t618-wdt"
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+static unsigned int timeout;
+
+module_param(timeout, uint, 0);
+MODULE_PARM_DESC(timeout, "Initial watchdog timeout in seconds");
+
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+ __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+struct rn5t618_wdt {
+ struct watchdog_device wdt_dev;
+ struct rn5t618 *rn5t618;
+};
+
+/*
+ * This array encodes the values of WDOGTIM field for the supported
+ * watchdog expiration times. If the watchdog is not accessed before
+ * the timer expiration, the PMU generates an interrupt and if the CPU
+ * doesn't clear it within one second the system is restarted.
+ */
+static const struct {
+ u8 reg_val;
+ unsigned int time;
+} rn5t618_wdt_map[] = {
+ { 0, 1 },
+ { 1, 8 },
+ { 2, 32 },
+ { 3, 128 },
+};
+
+static int rn5t618_wdt_set_timeout(struct watchdog_device *wdt_dev,
+ unsigned int t)
+{
+ struct rn5t618_wdt *wdt = watchdog_get_drvdata(wdt_dev);
+ int ret, i;
+
+ for (i = 0; i < ARRAY_SIZE(rn5t618_wdt_map); i++) {
+ if (rn5t618_wdt_map[i].time + 1 >= t)
+ break;
+ }
+
+ if (i == ARRAY_SIZE(rn5t618_wdt_map))
+ return -EINVAL;
+
+ ret = regmap_update_bits(wdt->rn5t618->regmap, RN5T618_WATCHDOG,
+ RN5T618_WATCHDOG_WDOGTIM_M,
+ rn5t618_wdt_map[i].reg_val);
+ if (!ret)
+ wdt_dev->timeout = rn5t618_wdt_map[i].time;
+
+ return ret;
+}
+
+static int rn5t618_wdt_start(struct watchdog_device *wdt_dev)
+{
+ struct rn5t618_wdt *wdt = watchdog_get_drvdata(wdt_dev);
+ int ret;
+
+ ret = rn5t618_wdt_set_timeout(wdt_dev, wdt_dev->timeout);
+ if (ret)
+ return ret;
+
+ /* enable repower-on */
+ ret = regmap_update_bits(wdt->rn5t618->regmap, RN5T618_REPCNT,
+ RN5T618_REPCNT_REPWRON,
+ RN5T618_REPCNT_REPWRON);
+ if (ret)
+ return ret;
+
+ /* enable watchdog */
+ ret = regmap_update_bits(wdt->rn5t618->regmap, RN5T618_WATCHDOG,
+ RN5T618_WATCHDOG_WDOGEN,
+ RN5T618_WATCHDOG_WDOGEN);
+ if (ret)
+ return ret;
+
+ /* enable watchdog interrupt */
+ return regmap_update_bits(wdt->rn5t618->regmap, RN5T618_PWRIREN,
+ RN5T618_PWRIRQ_IR_WDOG,
+ RN5T618_PWRIRQ_IR_WDOG);
+}
+
+static int rn5t618_wdt_stop(struct watchdog_device *wdt_dev)
+{
+ struct rn5t618_wdt *wdt = watchdog_get_drvdata(wdt_dev);
+
+ return regmap_update_bits(wdt->rn5t618->regmap, RN5T618_WATCHDOG,
+ RN5T618_WATCHDOG_WDOGEN, 0);
+}
+
+static int rn5t618_wdt_ping(struct watchdog_device *wdt_dev)
+{
+ struct rn5t618_wdt *wdt = watchdog_get_drvdata(wdt_dev);
+ unsigned int val;
+ int ret;
+
+ /* The counter is restarted after a R/W access to watchdog register */
+ ret = regmap_read(wdt->rn5t618->regmap, RN5T618_WATCHDOG, &val);
+ if (ret)
+ return ret;
+
+ ret = regmap_write(wdt->rn5t618->regmap, RN5T618_WATCHDOG, val);
+ if (ret)
+ return ret;
+
+ /* Clear pending watchdog interrupt */
+ return regmap_update_bits(wdt->rn5t618->regmap, RN5T618_PWRIRQ,
+ RN5T618_PWRIRQ_IR_WDOG, 0);
+}
+
+static struct watchdog_info rn5t618_wdt_info = {
+ .options = WDIOF_SETTIMEOUT | WDIOF_MAGICCLOSE |
+ WDIOF_KEEPALIVEPING,
+ .identity = DRIVER_NAME,
+};
+
+static struct watchdog_ops rn5t618_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = rn5t618_wdt_start,
+ .stop = rn5t618_wdt_stop,
+ .ping = rn5t618_wdt_ping,
+ .set_timeout = rn5t618_wdt_set_timeout,
+};
+
+static int rn5t618_wdt_probe(struct platform_device *pdev)
+{
+ struct rn5t618 *rn5t618 = dev_get_drvdata(pdev->dev.parent);
+ struct rn5t618_wdt *wdt;
+ int min_timeout, max_timeout;
+
+ wdt = devm_kzalloc(&pdev->dev, sizeof(struct rn5t618_wdt), GFP_KERNEL);
+ if (!wdt)
+ return -ENOMEM;
+
+ min_timeout = rn5t618_wdt_map[0].time;
+ max_timeout = rn5t618_wdt_map[ARRAY_SIZE(rn5t618_wdt_map) - 1].time;
+
+ wdt->rn5t618 = rn5t618;
+ wdt->wdt_dev.info = &rn5t618_wdt_info;
+ wdt->wdt_dev.ops = &rn5t618_wdt_ops;
+ wdt->wdt_dev.min_timeout = min_timeout;
+ wdt->wdt_dev.max_timeout = max_timeout;
+ wdt->wdt_dev.timeout = max_timeout;
+ wdt->wdt_dev.parent = &pdev->dev;
+
+ watchdog_set_drvdata(&wdt->wdt_dev, wdt);
+ watchdog_init_timeout(&wdt->wdt_dev, timeout, &pdev->dev);
+ watchdog_set_nowayout(&wdt->wdt_dev, nowayout);
+
+ platform_set_drvdata(pdev, wdt);
+
+ return watchdog_register_device(&wdt->wdt_dev);
+}
+
+static int rn5t618_wdt_remove(struct platform_device *pdev)
+{
+ struct rn5t618_wdt *wdt = platform_get_drvdata(pdev);
+
+ watchdog_unregister_device(&wdt->wdt_dev);
+
+ return 0;
+}
+
+static struct platform_driver rn5t618_wdt_driver = {
+ .probe = rn5t618_wdt_probe,
+ .remove = rn5t618_wdt_remove,
+ .driver = {
+ .name = DRIVER_NAME,
+ },
+};
+
+module_platform_driver(rn5t618_wdt_driver);
+
+MODULE_AUTHOR("Beniamino Galvani <b.galvani@gmail.com>");
+MODULE_DESCRIPTION("RN5T618 watchdog driver");
+MODULE_LICENSE("GPL v2");
#include <linux/of.h>
#include <linux/mfd/syscon.h>
#include <linux/regmap.h>
+#include <linux/reboot.h>
+#include <linux/delay.h>
#define S3C2410_WTCON 0x00
#define S3C2410_WTDAT 0x04
unsigned long wtdat_save;
struct watchdog_device wdt_device;
struct notifier_block freq_transition;
+ struct notifier_block restart_handler;
struct s3c2410_wdt_variant *drv_data;
struct regmap *pmureg;
};
.quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT,
};
+static const struct s3c2410_wdt_variant drv_data_exynos7 = {
+ .disable_reg = EXYNOS5_WDT_DISABLE_REG_OFFSET,
+ .mask_reset_reg = EXYNOS5_WDT_MASK_RESET_REG_OFFSET,
+ .mask_bit = 23,
+ .rst_stat_reg = EXYNOS5_RST_STAT_REG_OFFSET,
+ .rst_stat_bit = 23, /* A57 WDTRESET */
+ .quirks = QUIRK_HAS_PMU_CONFIG | QUIRK_HAS_RST_STAT,
+};
+
static const struct of_device_id s3c2410_wdt_match[] = {
{ .compatible = "samsung,s3c2410-wdt",
.data = &drv_data_s3c2410 },
.data = &drv_data_exynos5250 },
{ .compatible = "samsung,exynos5420-wdt",
.data = &drv_data_exynos5420 },
+ { .compatible = "samsung,exynos7-wdt",
+ .data = &drv_data_exynos7 },
{},
};
MODULE_DEVICE_TABLE(of, s3c2410_wdt_match);
}
#endif
+static int s3c2410wdt_restart(struct notifier_block *this,
+ unsigned long mode, void *cmd)
+{
+ struct s3c2410_wdt *wdt = container_of(this, struct s3c2410_wdt,
+ restart_handler);
+ void __iomem *wdt_base = wdt->reg_base;
+
+ /* disable watchdog, to be safe */
+ writel(0, wdt_base + S3C2410_WTCON);
+
+ /* put initial values into count and data */
+ writel(0x80, wdt_base + S3C2410_WTCNT);
+ writel(0x80, wdt_base + S3C2410_WTDAT);
+
+ /* set the watchdog to go and reset... */
+ writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV16 |
+ S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x20),
+ wdt_base + S3C2410_WTCON);
+
+ /* wait for reset to assert... */
+ mdelay(500);
+
+ return NOTIFY_DONE;
+}
+
static inline unsigned int s3c2410wdt_get_bootstatus(struct s3c2410_wdt *wdt)
{
unsigned int rst_stat;
platform_set_drvdata(pdev, wdt);
+ wdt->restart_handler.notifier_call = s3c2410wdt_restart;
+ wdt->restart_handler.priority = 128;
+ ret = register_restart_handler(&wdt->restart_handler);
+ if (ret)
+ pr_err("cannot register restart handler, %d\n", ret);
+
/* print out a statement of readiness */
wtcon = readl(wdt->reg_base + S3C2410_WTCON);
int ret;
struct s3c2410_wdt *wdt = platform_get_drvdata(dev);
+ unregister_restart_handler(&wdt->restart_handler);
+
ret = s3c2410wdt_mask_and_disable_reset(wdt, true);
if (ret < 0)
return ret;
return 0;
}
+static int __maybe_unused stmp3xxx_wdt_suspend(struct device *dev)
+{
+ struct watchdog_device *wdd = &stmp3xxx_wdd;
+
+ if (watchdog_active(wdd))
+ return wdt_stop(wdd);
+
+ return 0;
+}
+
+static int __maybe_unused stmp3xxx_wdt_resume(struct device *dev)
+{
+ struct watchdog_device *wdd = &stmp3xxx_wdd;
+
+ if (watchdog_active(wdd))
+ return wdt_start(wdd);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(stmp3xxx_wdt_pm_ops,
+ stmp3xxx_wdt_suspend, stmp3xxx_wdt_resume);
+
static struct platform_driver stmp3xxx_wdt_driver = {
.driver = {
.name = "stmp3xxx_rtc_wdt",
+ .pm = &stmp3xxx_wdt_pm_ops,
},
.probe = stmp3xxx_wdt_probe,
.remove = stmp3xxx_wdt_remove,
#include <linux/moduleparam.h>
#include <linux/notifier.h>
#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/platform_device.h>
#include <linux/reboot.h>
#include <linux/types.h>
#define WDT_MAX_TIMEOUT 16
#define WDT_MIN_TIMEOUT 1
-#define WDT_MODE_TIMEOUT(n) ((n) << 3)
-#define WDT_TIMEOUT_MASK WDT_MODE_TIMEOUT(0x0F)
+#define WDT_TIMEOUT_MASK 0x0F
-#define WDT_CTRL 0x00
#define WDT_CTRL_RELOAD ((1 << 0) | (0x0a57 << 1))
-#define WDT_MODE 0x04
#define WDT_MODE_EN (1 << 0)
-#define WDT_MODE_RST_EN (1 << 1)
#define DRV_NAME "sunxi-wdt"
#define DRV_VERSION "1.0"
static bool nowayout = WATCHDOG_NOWAYOUT;
static unsigned int timeout = WDT_MAX_TIMEOUT;
+/*
+ * This structure stores the register offsets for different variants
+ * of Allwinner's watchdog hardware.
+ */
+struct sunxi_wdt_reg {
+ u8 wdt_ctrl;
+ u8 wdt_cfg;
+ u8 wdt_mode;
+ u8 wdt_timeout_shift;
+ u8 wdt_reset_mask;
+ u8 wdt_reset_val;
+};
+
struct sunxi_wdt_dev {
struct watchdog_device wdt_dev;
void __iomem *wdt_base;
+ const struct sunxi_wdt_reg *wdt_regs;
struct notifier_block restart_handler;
};
/*
* wdt_timeout_map maps the watchdog timer interval value in seconds to
- * the value of the register WDT_MODE bit 3:6
+ * the value of the register WDT_MODE at bits .wdt_timeout_shift ~ +3
*
* [timeout seconds] = register value
*
struct sunxi_wdt_dev,
restart_handler);
void __iomem *wdt_base = sunxi_wdt->wdt_base;
+ const struct sunxi_wdt_reg *regs = sunxi_wdt->wdt_regs;
+ u32 val;
+
+ /* Set system reset function */
+ val = readl(wdt_base + regs->wdt_cfg);
+ val &= ~(regs->wdt_reset_mask);
+ val |= regs->wdt_reset_val;
+ writel(val, wdt_base + regs->wdt_cfg);
- /* Enable timer and set reset bit in the watchdog */
- writel(WDT_MODE_EN | WDT_MODE_RST_EN, wdt_base + WDT_MODE);
+ /* Set lowest timeout and enable watchdog */
+ val = readl(wdt_base + regs->wdt_mode);
+ val &= ~(WDT_TIMEOUT_MASK << regs->wdt_timeout_shift);
+ val |= WDT_MODE_EN;
+ writel(val, wdt_base + regs->wdt_mode);
/*
* Restart the watchdog. The default (and lowest) interval
* value for the watchdog is 0.5s.
*/
- writel(WDT_CTRL_RELOAD, wdt_base + WDT_CTRL);
+ writel(WDT_CTRL_RELOAD, wdt_base + regs->wdt_ctrl);
while (1) {
mdelay(5);
- writel(WDT_MODE_EN | WDT_MODE_RST_EN, wdt_base + WDT_MODE);
+ val = readl(wdt_base + regs->wdt_mode);
+ val |= WDT_MODE_EN;
+ writel(val, wdt_base + regs->wdt_mode);
}
return NOTIFY_DONE;
}
{
struct sunxi_wdt_dev *sunxi_wdt = watchdog_get_drvdata(wdt_dev);
void __iomem *wdt_base = sunxi_wdt->wdt_base;
+ const struct sunxi_wdt_reg *regs = sunxi_wdt->wdt_regs;
- iowrite32(WDT_CTRL_RELOAD, wdt_base + WDT_CTRL);
+ writel(WDT_CTRL_RELOAD, wdt_base + regs->wdt_ctrl);
return 0;
}
{
struct sunxi_wdt_dev *sunxi_wdt = watchdog_get_drvdata(wdt_dev);
void __iomem *wdt_base = sunxi_wdt->wdt_base;
+ const struct sunxi_wdt_reg *regs = sunxi_wdt->wdt_regs;
u32 reg;
if (wdt_timeout_map[timeout] == 0)
sunxi_wdt->wdt_dev.timeout = timeout;
- reg = ioread32(wdt_base + WDT_MODE);
- reg &= ~WDT_TIMEOUT_MASK;
- reg |= WDT_MODE_TIMEOUT(wdt_timeout_map[timeout]);
- iowrite32(reg, wdt_base + WDT_MODE);
+ reg = readl(wdt_base + regs->wdt_mode);
+ reg &= ~(WDT_TIMEOUT_MASK << regs->wdt_timeout_shift);
+ reg |= wdt_timeout_map[timeout] << regs->wdt_timeout_shift;
+ writel(reg, wdt_base + regs->wdt_mode);
sunxi_wdt_ping(wdt_dev);
{
struct sunxi_wdt_dev *sunxi_wdt = watchdog_get_drvdata(wdt_dev);
void __iomem *wdt_base = sunxi_wdt->wdt_base;
+ const struct sunxi_wdt_reg *regs = sunxi_wdt->wdt_regs;
- iowrite32(0, wdt_base + WDT_MODE);
+ writel(0, wdt_base + regs->wdt_mode);
return 0;
}
u32 reg;
struct sunxi_wdt_dev *sunxi_wdt = watchdog_get_drvdata(wdt_dev);
void __iomem *wdt_base = sunxi_wdt->wdt_base;
+ const struct sunxi_wdt_reg *regs = sunxi_wdt->wdt_regs;
int ret;
ret = sunxi_wdt_set_timeout(&sunxi_wdt->wdt_dev,
if (ret < 0)
return ret;
- reg = ioread32(wdt_base + WDT_MODE);
- reg |= (WDT_MODE_RST_EN | WDT_MODE_EN);
- iowrite32(reg, wdt_base + WDT_MODE);
+ /* Set system reset function */
+ reg = readl(wdt_base + regs->wdt_cfg);
+ reg &= ~(regs->wdt_reset_mask);
+ reg |= ~(regs->wdt_reset_val);
+ writel(reg, wdt_base + regs->wdt_cfg);
+
+ /* Enable watchdog */
+ reg = readl(wdt_base + regs->wdt_mode);
+ reg |= WDT_MODE_EN;
+ writel(reg, wdt_base + regs->wdt_mode);
return 0;
}
.set_timeout = sunxi_wdt_set_timeout,
};
+static const struct sunxi_wdt_reg sun4i_wdt_reg = {
+ .wdt_ctrl = 0x00,
+ .wdt_cfg = 0x04,
+ .wdt_mode = 0x04,
+ .wdt_timeout_shift = 3,
+ .wdt_reset_mask = 0x02,
+ .wdt_reset_val = 0x02,
+};
+
+static const struct sunxi_wdt_reg sun6i_wdt_reg = {
+ .wdt_ctrl = 0x10,
+ .wdt_cfg = 0x14,
+ .wdt_mode = 0x18,
+ .wdt_timeout_shift = 4,
+ .wdt_reset_mask = 0x03,
+ .wdt_reset_val = 0x01,
+};
+
+static const struct of_device_id sunxi_wdt_dt_ids[] = {
+ { .compatible = "allwinner,sun4i-a10-wdt", .data = &sun4i_wdt_reg },
+ { .compatible = "allwinner,sun6i-a31-wdt", .data = &sun6i_wdt_reg },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, sunxi_wdt_dt_ids);
+
static int sunxi_wdt_probe(struct platform_device *pdev)
{
struct sunxi_wdt_dev *sunxi_wdt;
+ const struct of_device_id *device;
struct resource *res;
int err;
platform_set_drvdata(pdev, sunxi_wdt);
+ device = of_match_device(sunxi_wdt_dt_ids, &pdev->dev);
+ if (!device)
+ return -ENODEV;
+
+ sunxi_wdt->wdt_regs = device->data;
+
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
sunxi_wdt->wdt_base = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(sunxi_wdt->wdt_base))
sunxi_wdt_stop(&sunxi_wdt->wdt_dev);
}
-static const struct of_device_id sunxi_wdt_dt_ids[] = {
- { .compatible = "allwinner,sun4i-a10-wdt" },
- { /* sentinel */ }
-};
-MODULE_DEVICE_TABLE(of, sunxi_wdt_dt_ids);
-
static struct platform_driver sunxi_wdt_driver = {
.probe = sunxi_wdt_probe,
.remove = sunxi_wdt_remove,
static int ts72xx_wdt_remove(struct platform_device *pdev)
{
- int error;
-
- error = misc_deregister(&ts72xx_wdt_miscdev);
-
- return error;
+ return misc_deregister(&ts72xx_wdt_miscdev);
}
static struct platform_driver ts72xx_wdt_driver = {
static enum bp_state update_schedule(enum bp_state state)
{
+ if (state == BP_ECANCELED)
+ return BP_ECANCELED;
+
if (state == BP_DONE) {
balloon_stats.schedule_delay = 1;
balloon_stats.retry_count = 1;
.acpi = EFI_INVALID_TABLE_ADDR,
.acpi20 = EFI_INVALID_TABLE_ADDR,
.smbios = EFI_INVALID_TABLE_ADDR,
+ .smbios3 = EFI_INVALID_TABLE_ADDR,
.sal_systab = EFI_INVALID_TABLE_ADDR,
.boot_info = EFI_INVALID_TABLE_ADDR,
.hcdp = EFI_INVALID_TABLE_ADDR,
#endif
if (pci_seg_supported) {
- struct physdev_pci_device_add add = {
- .seg = pci_domain_nr(pci_dev->bus),
- .bus = pci_dev->bus->number,
- .devfn = pci_dev->devfn
+ struct {
+ struct physdev_pci_device_add add;
+ uint32_t pxm;
+ } add_ext = {
+ .add.seg = pci_domain_nr(pci_dev->bus),
+ .add.bus = pci_dev->bus->number,
+ .add.devfn = pci_dev->devfn
};
+ struct physdev_pci_device_add *add = &add_ext.add;
+
#ifdef CONFIG_ACPI
acpi_handle handle;
#endif
#ifdef CONFIG_PCI_IOV
if (pci_dev->is_virtfn) {
- add.flags = XEN_PCI_DEV_VIRTFN;
- add.physfn.bus = physfn->bus->number;
- add.physfn.devfn = physfn->devfn;
+ add->flags = XEN_PCI_DEV_VIRTFN;
+ add->physfn.bus = physfn->bus->number;
+ add->physfn.devfn = physfn->devfn;
} else
#endif
if (pci_ari_enabled(pci_dev->bus) && PCI_SLOT(pci_dev->devfn))
- add.flags = XEN_PCI_DEV_EXTFN;
+ add->flags = XEN_PCI_DEV_EXTFN;
#ifdef CONFIG_ACPI
handle = ACPI_HANDLE(&pci_dev->dev);
status = acpi_evaluate_integer(handle, "_PXM",
NULL, &pxm);
if (ACPI_SUCCESS(status)) {
- add.optarr[0] = pxm;
- add.flags |= XEN_PCI_DEV_PXM;
+ add->optarr[0] = pxm;
+ add->flags |= XEN_PCI_DEV_PXM;
break;
}
status = acpi_get_parent(handle, &handle);
}
#endif /* CONFIG_ACPI */
- r = HYPERVISOR_physdev_op(PHYSDEVOP_pci_device_add, &add);
+ r = HYPERVISOR_physdev_op(PHYSDEVOP_pci_device_add, add);
if (r != -ENOSYS)
return r;
pci_seg_supported = false;
tpg->tport->tport_name, pending_req->v2p->lun,
pending_req->cmnd[0], status_byte(errors), msg_byte(errors),
host_byte(errors), driver_byte(errors));
-
- if (CHECK_CONDITION & status_byte(errors))
- __scsi_print_sense("xen-pvscsi", sense_buffer,
- SCSI_SENSE_BUFFERSIZE);
}
static void scsiback_fast_flush_area(struct vscsibk_pend *req)
source "fs/autofs4/Kconfig"
source "fs/fuse/Kconfig"
+source "fs/overlayfs/Kconfig"
menu "Caches"
obj-$(CONFIG_AUTOFS4_FS) += autofs4/
obj-$(CONFIG_ADFS_FS) += adfs/
obj-$(CONFIG_FUSE_FS) += fuse/
+obj-$(CONFIG_OVERLAY_FS) += overlayfs/
obj-$(CONFIG_UDF_FS) += udf/
obj-$(CONFIG_SUN_OPENPROMFS) += openpromfs/
obj-$(CONFIG_OMFS_FS) += omfs/
static const struct file_operations aio_ring_fops;
static const struct address_space_operations aio_ctx_aops;
+/* Backing dev info for aio fs.
+ * -no dirty page accounting or writeback happens
+ */
+static struct backing_dev_info aio_fs_backing_dev_info = {
+ .name = "aiofs",
+ .state = 0,
+ .capabilities = BDI_CAP_NO_ACCT_AND_WRITEBACK | BDI_CAP_MAP_COPY,
+};
+
static struct file *aio_private_file(struct kioctx *ctx, loff_t nr_pages)
{
struct qstr this = QSTR_INIT("[aio]", 5);
inode->i_mapping->a_ops = &aio_ctx_aops;
inode->i_mapping->private_data = ctx;
+ inode->i_mapping->backing_dev_info = &aio_fs_backing_dev_info;
inode->i_size = PAGE_SIZE * nr_pages;
path.dentry = d_alloc_pseudo(aio_mnt->mnt_sb, &this);
if (IS_ERR(aio_mnt))
panic("Failed to create aio fs mount.");
+ if (bdi_init(&aio_fs_backing_dev_info))
+ panic("Failed to init aio fs backing dev info.");
+
kiocb_cachep = KMEM_CACHE(kiocb, SLAB_HWCACHE_ALIGN|SLAB_PANIC);
kioctx_cachep = KMEM_CACHE(kioctx,SLAB_HWCACHE_ALIGN|SLAB_PANIC);
.mmap = aio_ring_mmap,
};
-static int aio_set_page_dirty(struct page *page)
-{
- return 0;
-}
-
#if IS_ENABLED(CONFIG_MIGRATION)
static int aio_migratepage(struct address_space *mapping, struct page *new,
struct page *old, enum migrate_mode mode)
#endif
static const struct address_space_operations aio_ctx_aops = {
- .set_page_dirty = aio_set_page_dirty,
+ .set_page_dirty = __set_page_dirty_no_writeback,
#if IS_ENABLED(CONFIG_MIGRATION)
.migratepage = aio_migratepage,
#endif
pr_debug("pid(%d) page[%d]->count=%d\n",
current->pid, i, page_count(page));
SetPageUptodate(page);
- SetPageDirty(page);
unlock_page(page);
ctx->ring_pages[i] = page;
}
EXPORT_SYMBOL_GPL(blkdev_write_iter);
-static ssize_t blkdev_read_iter(struct kiocb *iocb, struct iov_iter *to)
+ssize_t blkdev_read_iter(struct kiocb *iocb, struct iov_iter *to)
{
struct file *file = iocb->ki_filp;
struct inode *bd_inode = file->f_mapping->host;
iov_iter_truncate(to, size);
return generic_file_read_iter(iocb, to);
}
+EXPORT_SYMBOL_GPL(blkdev_read_iter);
/*
* Try to release a page associated with block device when the system
bytes = min(bytes, working_bytes);
kaddr = kmap_atomic(page_out);
memcpy(kaddr + *pg_offset, buf + buf_offset, bytes);
- if (*pg_index == (vcnt - 1) && *pg_offset == 0)
- memset(kaddr + bytes, 0, PAGE_CACHE_SIZE - bytes);
kunmap_atomic(kaddr);
flush_dcache_page(page_out);
return 1;
}
+
+/*
+ * When uncompressing data, we need to make sure and zero any parts of
+ * the biovec that were not filled in by the decompression code. pg_index
+ * and pg_offset indicate the last page and the last offset of that page
+ * that have been filled in. This will zero everything remaining in the
+ * biovec.
+ */
+void btrfs_clear_biovec_end(struct bio_vec *bvec, int vcnt,
+ unsigned long pg_index,
+ unsigned long pg_offset)
+{
+ while (pg_index < vcnt) {
+ struct page *page = bvec[pg_index].bv_page;
+ unsigned long off = bvec[pg_index].bv_offset;
+ unsigned long len = bvec[pg_index].bv_len;
+
+ if (pg_offset < off)
+ pg_offset = off;
+ if (pg_offset < off + len) {
+ unsigned long bytes = off + len - pg_offset;
+ char *kaddr;
+
+ kaddr = kmap_atomic(page);
+ memset(kaddr + pg_offset, 0, bytes);
+ kunmap_atomic(kaddr);
+ }
+ pg_index++;
+ pg_offset = 0;
+ }
+}
unsigned long nr_pages);
int btrfs_submit_compressed_read(struct inode *inode, struct bio *bio,
int mirror_num, unsigned long bio_flags);
-
+void btrfs_clear_biovec_end(struct bio_vec *bvec, int vcnt,
+ unsigned long pg_index,
+ unsigned long pg_offset);
struct btrfs_compress_op {
struct list_head *(*alloc_workspace)(void);
{
int i;
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
- /* lockdep really cares that we take all of these spinlocks
- * in the right order. If any of the locks in the path are not
- * currently blocking, it is going to complain. So, make really
- * really sure by forcing the path to blocking before we clear
- * the path blocking.
- */
if (held) {
btrfs_set_lock_blocking_rw(held, held_rw);
if (held_rw == BTRFS_WRITE_LOCK)
held_rw = BTRFS_READ_LOCK_BLOCKING;
}
btrfs_set_path_blocking(p);
-#endif
for (i = BTRFS_MAX_LEVEL - 1; i >= 0; i--) {
if (p->nodes[i] && p->locks[i]) {
}
}
-#ifdef CONFIG_DEBUG_LOCK_ALLOC
if (held)
btrfs_clear_lock_blocking_rw(held, held_rw);
-#endif
}
/* this also releases the path */
}
p->locks[level] = BTRFS_WRITE_LOCK;
} else {
- err = btrfs_try_tree_read_lock(b);
+ err = btrfs_tree_read_lock_atomic(b);
if (!err) {
btrfs_set_path_blocking(p);
btrfs_tree_read_lock(b);
}
level = btrfs_header_level(b);
- err = btrfs_try_tree_read_lock(b);
+ err = btrfs_tree_read_lock_atomic(b);
if (!err) {
btrfs_set_path_blocking(p);
btrfs_tree_read_lock(b);
struct btrfs_root *root, unsigned long count);
int btrfs_async_run_delayed_refs(struct btrfs_root *root,
unsigned long count, int wait);
-int btrfs_lookup_extent(struct btrfs_root *root, u64 start, u64 len);
+int btrfs_lookup_data_extent(struct btrfs_root *root, u64 start, u64 len);
int btrfs_lookup_extent_info(struct btrfs_trans_handle *trans,
struct btrfs_root *root, u64 bytenr,
u64 offset, int metadata, u64 *refs, u64 *flags);
struct btrfs_super_block *sb = fs_info->super_copy;
int ret = 0;
- if (sb->root_level > BTRFS_MAX_LEVEL) {
- printk(KERN_ERR "BTRFS: tree_root level too big: %d > %d\n",
- sb->root_level, BTRFS_MAX_LEVEL);
+ if (btrfs_super_root_level(sb) >= BTRFS_MAX_LEVEL) {
+ printk(KERN_ERR "BTRFS: tree_root level too big: %d >= %d\n",
+ btrfs_super_root_level(sb), BTRFS_MAX_LEVEL);
ret = -EINVAL;
}
- if (sb->chunk_root_level > BTRFS_MAX_LEVEL) {
- printk(KERN_ERR "BTRFS: chunk_root level too big: %d > %d\n",
- sb->chunk_root_level, BTRFS_MAX_LEVEL);
+ if (btrfs_super_chunk_root_level(sb) >= BTRFS_MAX_LEVEL) {
+ printk(KERN_ERR "BTRFS: chunk_root level too big: %d >= %d\n",
+ btrfs_super_chunk_root_level(sb), BTRFS_MAX_LEVEL);
ret = -EINVAL;
}
- if (sb->log_root_level > BTRFS_MAX_LEVEL) {
- printk(KERN_ERR "BTRFS: log_root level too big: %d > %d\n",
- sb->log_root_level, BTRFS_MAX_LEVEL);
+ if (btrfs_super_log_root_level(sb) >= BTRFS_MAX_LEVEL) {
+ printk(KERN_ERR "BTRFS: log_root level too big: %d >= %d\n",
+ btrfs_super_log_root_level(sb), BTRFS_MAX_LEVEL);
ret = -EINVAL;
}
* The common minimum, we don't know if we can trust the nodesize/sectorsize
* items yet, they'll be verified later. Issue just a warning.
*/
- if (!IS_ALIGNED(sb->root, 4096))
+ if (!IS_ALIGNED(btrfs_super_root(sb), 4096))
printk(KERN_WARNING "BTRFS: tree_root block unaligned: %llu\n",
sb->root);
- if (!IS_ALIGNED(sb->chunk_root, 4096))
+ if (!IS_ALIGNED(btrfs_super_chunk_root(sb), 4096))
printk(KERN_WARNING "BTRFS: tree_root block unaligned: %llu\n",
sb->chunk_root);
- if (!IS_ALIGNED(sb->log_root, 4096))
+ if (!IS_ALIGNED(btrfs_super_log_root(sb), 4096))
printk(KERN_WARNING "BTRFS: tree_root block unaligned: %llu\n",
- sb->log_root);
+ btrfs_super_log_root(sb));
if (memcmp(fs_info->fsid, sb->dev_item.fsid, BTRFS_UUID_SIZE) != 0) {
printk(KERN_ERR "BTRFS: dev_item UUID does not match fsid: %pU != %pU\n",
* Hint to catch really bogus numbers, bitflips or so, more exact checks are
* done later
*/
- if (sb->num_devices > (1UL << 31))
+ if (btrfs_super_num_devices(sb) > (1UL << 31))
printk(KERN_WARNING "BTRFS: suspicious number of devices: %llu\n",
- sb->num_devices);
+ btrfs_super_num_devices(sb));
- if (sb->bytenr != BTRFS_SUPER_INFO_OFFSET) {
+ if (btrfs_super_bytenr(sb) != BTRFS_SUPER_INFO_OFFSET) {
printk(KERN_ERR "BTRFS: super offset mismatch %llu != %u\n",
- sb->bytenr, BTRFS_SUPER_INFO_OFFSET);
+ btrfs_super_bytenr(sb), BTRFS_SUPER_INFO_OFFSET);
ret = -EINVAL;
}
* The generation is a global counter, we'll trust it more than the others
* but it's still possible that it's the one that's wrong.
*/
- if (sb->generation < sb->chunk_root_generation)
+ if (btrfs_super_generation(sb) < btrfs_super_chunk_root_generation(sb))
printk(KERN_WARNING
"BTRFS: suspicious: generation < chunk_root_generation: %llu < %llu\n",
- sb->generation, sb->chunk_root_generation);
- if (sb->generation < sb->cache_generation && sb->cache_generation != (u64)-1)
+ btrfs_super_generation(sb), btrfs_super_chunk_root_generation(sb));
+ if (btrfs_super_generation(sb) < btrfs_super_cache_generation(sb)
+ && btrfs_super_cache_generation(sb) != (u64)-1)
printk(KERN_WARNING
"BTRFS: suspicious: generation < cache_generation: %llu < %llu\n",
- sb->generation, sb->cache_generation);
+ btrfs_super_generation(sb), btrfs_super_cache_generation(sb));
return ret;
}
rcu_read_unlock();
}
-/* simple helper to search for an existing extent at a given offset */
-int btrfs_lookup_extent(struct btrfs_root *root, u64 start, u64 len)
+/* simple helper to search for an existing data extent at a given offset */
+int btrfs_lookup_data_extent(struct btrfs_root *root, u64 start, u64 len)
{
int ret;
struct btrfs_key key;
key.type = BTRFS_EXTENT_ITEM_KEY;
ret = btrfs_search_slot(NULL, root->fs_info->extent_root, &key, path,
0, 0);
- if (ret > 0) {
- btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0]);
- if (key.objectid == start &&
- key.type == BTRFS_METADATA_ITEM_KEY)
- ret = 0;
- }
btrfs_free_path(path);
return ret;
}
else
key.type = BTRFS_EXTENT_ITEM_KEY;
-again:
ret = btrfs_search_slot(trans, root->fs_info->extent_root,
&key, path, 0, 0);
if (ret < 0)
key.offset == root->nodesize)
ret = 0;
}
- if (ret) {
- key.objectid = bytenr;
- key.type = BTRFS_EXTENT_ITEM_KEY;
- key.offset = root->nodesize;
- btrfs_release_path(path);
- goto again;
- }
}
if (ret == 0) {
ret = 0;
fail:
while (ret < 0 && !list_empty(&tmplist)) {
- sums = list_entry(&tmplist, struct btrfs_ordered_sum, list);
+ sums = list_entry(tmplist.next, struct btrfs_ordered_sum, list);
list_del(&sums->list);
kfree(sums);
}
return ret;
}
-/* copy of check_sticky in fs/namei.c()
-* It's inline, so penalty for filesystems that don't use sticky bit is
-* minimal.
-*/
-static inline int btrfs_check_sticky(struct inode *dir, struct inode *inode)
-{
- kuid_t fsuid = current_fsuid();
-
- if (!(dir->i_mode & S_ISVTX))
- return 0;
- if (uid_eq(inode->i_uid, fsuid))
- return 0;
- if (uid_eq(dir->i_uid, fsuid))
- return 0;
- return !capable(CAP_FOWNER);
-}
-
/* copy of may_delete in fs/namei.c()
* Check whether we can remove a link victim from directory dir, check
* whether the type of victim is right.
return error;
if (IS_APPEND(dir))
return -EPERM;
- if (btrfs_check_sticky(dir, victim->d_inode)||
- IS_APPEND(victim->d_inode)||
+ if (check_sticky(dir, victim->d_inode) || IS_APPEND(victim->d_inode) ||
IS_IMMUTABLE(victim->d_inode) || IS_SWAPFILE(victim->d_inode))
return -EPERM;
if (isdir) {
atomic_inc(&eb->spinning_readers);
}
+/*
+ * take a spinning read lock.
+ * returns 1 if we get the read lock and 0 if we don't
+ * this won't wait for blocking writers
+ */
+int btrfs_tree_read_lock_atomic(struct extent_buffer *eb)
+{
+ if (atomic_read(&eb->blocking_writers))
+ return 0;
+
+ read_lock(&eb->lock);
+ if (atomic_read(&eb->blocking_writers)) {
+ read_unlock(&eb->lock);
+ return 0;
+ }
+ atomic_inc(&eb->read_locks);
+ atomic_inc(&eb->spinning_readers);
+ return 1;
+}
+
/*
* returns 1 if we get the read lock and 0 if we don't
* this won't wait for blocking writers
atomic_read(&eb->blocking_readers))
return 0;
- if (!write_trylock(&eb->lock))
- return 0;
-
+ write_lock(&eb->lock);
if (atomic_read(&eb->blocking_writers) ||
atomic_read(&eb->blocking_readers)) {
write_unlock(&eb->lock);
void btrfs_assert_tree_locked(struct extent_buffer *eb);
int btrfs_try_tree_read_lock(struct extent_buffer *eb);
int btrfs_try_tree_write_lock(struct extent_buffer *eb);
+int btrfs_tree_read_lock_atomic(struct extent_buffer *eb);
+
static inline void btrfs_tree_unlock_rw(struct extent_buffer *eb, int rw)
{
}
done:
kunmap(pages_in[page_in_index]);
+ if (!ret)
+ btrfs_clear_biovec_end(bvec, vcnt, page_out_index, pg_offset);
return ret;
}
goto out;
}
+ /*
+ * the caller is already checking against PAGE_SIZE, but lets
+ * move this check closer to the memcpy/memset
+ */
+ destlen = min_t(unsigned long, destlen, PAGE_SIZE);
bytes = min_t(unsigned long, destlen, out_len - start_byte);
kaddr = kmap_atomic(dest_page);
memcpy(kaddr, workspace->buf + start_byte, bytes);
+
+ /*
+ * btrfs_getblock is doing a zero on the tail of the page too,
+ * but this will cover anything missing from the decompressed
+ * data.
+ */
+ if (bytes < destlen)
+ memset(kaddr+bytes, 0, destlen-bytes);
kunmap_atomic(kaddr);
out:
return ret;
extent_map_exit();
extent_io_exit();
btrfs_interface_exit();
+ btrfs_end_io_wq_exit();
unregister_filesystem(&btrfs_fs_type);
btrfs_exit_sysfs();
btrfs_cleanup_fs_uuids();
* is this extent already allocated in the extent
* allocation tree? If so, just add a reference
*/
- ret = btrfs_lookup_extent(root, ins.objectid,
+ ret = btrfs_lookup_data_extent(root, ins.objectid,
ins.offset);
if (ret == 0) {
ret = btrfs_inc_extent_ref(trans, root,
zlib_inflateEnd(&workspace->strm);
if (data_in)
kunmap(pages_in[page_in_index]);
+ if (!ret)
+ btrfs_clear_biovec_end(bvec, vcnt, page_out_index, pg_offset);
return ret;
}
struct workspace *workspace = list_entry(ws, struct workspace, list);
int ret = 0;
int wbits = MAX_WBITS;
- unsigned long bytes_left = destlen;
+ unsigned long bytes_left;
unsigned long total_out = 0;
+ unsigned long pg_offset = 0;
char *kaddr;
+ destlen = min_t(unsigned long, destlen, PAGE_SIZE);
+ bytes_left = destlen;
+
workspace->strm.next_in = data_in;
workspace->strm.avail_in = srclen;
workspace->strm.total_in = 0;
unsigned long buf_start;
unsigned long buf_offset;
unsigned long bytes;
- unsigned long pg_offset = 0;
ret = zlib_inflate(&workspace->strm, Z_NO_FLUSH);
if (ret != Z_OK && ret != Z_STREAM_END)
ret = 0;
zlib_inflateEnd(&workspace->strm);
+
+ /*
+ * this should only happen if zlib returned fewer bytes than we
+ * expected. btrfs_get_block is responsible for zeroing from the
+ * end of the inline extent (destlen) to the end of the page
+ */
+ if (pg_offset < destlen) {
+ kaddr = kmap_atomic(dest_page);
+ memset(kaddr + pg_offset, 0, destlen - pg_offset);
+ kunmap_atomic(kaddr);
+ }
return ret;
}
page_cache_release(page);
}
-
-static int quiet_error(struct buffer_head *bh)
-{
- if (!test_bit(BH_Quiet, &bh->b_state) && printk_ratelimit())
- return 0;
- return 1;
-}
-
-
-static void buffer_io_error(struct buffer_head *bh)
+static void buffer_io_error(struct buffer_head *bh, char *msg)
{
char b[BDEVNAME_SIZE];
- printk(KERN_ERR "Buffer I/O error on device %s, logical block %Lu\n",
+
+ if (!test_bit(BH_Quiet, &bh->b_state))
+ printk_ratelimited(KERN_ERR
+ "Buffer I/O error on dev %s, logical block %llu%s\n",
bdevname(bh->b_bdev, b),
- (unsigned long long)bh->b_blocknr);
+ (unsigned long long)bh->b_blocknr, msg);
}
/*
void end_buffer_write_sync(struct buffer_head *bh, int uptodate)
{
- char b[BDEVNAME_SIZE];
-
if (uptodate) {
set_buffer_uptodate(bh);
} else {
- if (!quiet_error(bh)) {
- buffer_io_error(bh);
- printk(KERN_WARNING "lost page write due to "
- "I/O error on %s\n",
- bdevname(bh->b_bdev, b));
- }
+ buffer_io_error(bh, ", lost sync page write");
set_buffer_write_io_error(bh);
clear_buffer_uptodate(bh);
}
set_buffer_uptodate(bh);
} else {
clear_buffer_uptodate(bh);
- if (!quiet_error(bh))
- buffer_io_error(bh);
+ buffer_io_error(bh, ", async page read");
SetPageError(page);
}
*/
void end_buffer_async_write(struct buffer_head *bh, int uptodate)
{
- char b[BDEVNAME_SIZE];
unsigned long flags;
struct buffer_head *first;
struct buffer_head *tmp;
if (uptodate) {
set_buffer_uptodate(bh);
} else {
- if (!quiet_error(bh)) {
- buffer_io_error(bh);
- printk(KERN_WARNING "lost page write due to "
- "I/O error on %s\n",
- bdevname(bh->b_bdev, b));
- }
+ buffer_io_error(bh, ", lost async page write");
set_bit(AS_EIO, &page->mapping->flags);
set_buffer_write_io_error(bh);
clear_buffer_uptodate(bh);
*/
static int
grow_dev_page(struct block_device *bdev, sector_t block,
- pgoff_t index, int size, int sizebits)
+ pgoff_t index, int size, int sizebits, gfp_t gfp)
{
struct inode *inode = bdev->bd_inode;
struct page *page;
int ret = 0; /* Will call free_more_memory() */
gfp_t gfp_mask;
- gfp_mask = mapping_gfp_mask(inode->i_mapping) & ~__GFP_FS;
- gfp_mask |= __GFP_MOVABLE;
+ gfp_mask = (mapping_gfp_mask(inode->i_mapping) & ~__GFP_FS) | gfp;
+
/*
* XXX: __getblk_slow() can not really deal with failure and
* will endlessly loop on improvised global reclaim. Prefer
* that page was dirty, the buffers are set dirty also.
*/
static int
-grow_buffers(struct block_device *bdev, sector_t block, int size)
+grow_buffers(struct block_device *bdev, sector_t block, int size, gfp_t gfp)
{
pgoff_t index;
int sizebits;
}
/* Create a page with the proper size buffers.. */
- return grow_dev_page(bdev, block, index, size, sizebits);
+ return grow_dev_page(bdev, block, index, size, sizebits, gfp);
}
-static struct buffer_head *
-__getblk_slow(struct block_device *bdev, sector_t block, int size)
+struct buffer_head *
+__getblk_slow(struct block_device *bdev, sector_t block,
+ unsigned size, gfp_t gfp)
{
/* Size must be multiple of hard sectorsize */
if (unlikely(size & (bdev_logical_block_size(bdev)-1) ||
if (bh)
return bh;
- ret = grow_buffers(bdev, block, size);
+ ret = grow_buffers(bdev, block, size, gfp);
if (ret < 0)
return NULL;
if (ret == 0)
free_more_memory();
}
}
+EXPORT_SYMBOL(__getblk_slow);
/*
* The relationship between dirty buffers and dirty pages:
EXPORT_SYMBOL(__find_get_block);
/*
- * __getblk will locate (and, if necessary, create) the buffer_head
+ * __getblk_gfp() will locate (and, if necessary, create) the buffer_head
* which corresponds to the passed block_device, block and size. The
* returned buffer has its reference count incremented.
*
- * __getblk() will lock up the machine if grow_dev_page's try_to_free_buffers()
- * attempt is failing. FIXME, perhaps?
+ * __getblk_gfp() will lock up the machine if grow_dev_page's
+ * try_to_free_buffers() attempt is failing. FIXME, perhaps?
*/
struct buffer_head *
-__getblk(struct block_device *bdev, sector_t block, unsigned size)
+__getblk_gfp(struct block_device *bdev, sector_t block,
+ unsigned size, gfp_t gfp)
{
struct buffer_head *bh = __find_get_block(bdev, block, size);
might_sleep();
if (bh == NULL)
- bh = __getblk_slow(bdev, block, size);
+ bh = __getblk_slow(bdev, block, size, gfp);
return bh;
}
-EXPORT_SYMBOL(__getblk);
+EXPORT_SYMBOL(__getblk_gfp);
/*
* Do async read-ahead on a buffer..
EXPORT_SYMBOL(__breadahead);
/**
- * __bread() - reads a specified block and returns the bh
+ * __bread_gfp() - reads a specified block and returns the bh
* @bdev: the block_device to read from
* @block: number of block
* @size: size (in bytes) to read
- *
+ * @gfp: page allocation flag
+ *
* Reads a specified block, and returns buffer head that contains it.
+ * The page cache can be allocated from non-movable area
+ * not to prevent page migration if you set gfp to zero.
* It returns NULL if the block was unreadable.
*/
struct buffer_head *
-__bread(struct block_device *bdev, sector_t block, unsigned size)
+__bread_gfp(struct block_device *bdev, sector_t block,
+ unsigned size, gfp_t gfp)
{
- struct buffer_head *bh = __getblk(bdev, block, size);
+ struct buffer_head *bh = __getblk_gfp(bdev, block, size, gfp);
if (likely(bh) && !buffer_uptodate(bh))
bh = __bread_slow(bh);
return bh;
}
-EXPORT_SYMBOL(__bread);
+EXPORT_SYMBOL(__bread_gfp);
/*
* invalidate_bh_lrus() is called rarely - but not only at unmount.
struct page *page, void *fsdata)
{
struct inode *inode = mapping->host;
+ loff_t old_size = inode->i_size;
int i_size_changed = 0;
copied = block_write_end(file, mapping, pos, len, copied, page, fsdata);
unlock_page(page);
page_cache_release(page);
+ if (old_size < pos)
+ pagecache_isize_extended(inode, old_size, pos);
/*
* Don't mark the inode dirty under page lock. First, it unnecessarily
* makes the holding time of page lock longer. Second, it forces lock
for (i = 0; i < CEPH_CAP_BITS; i++)
if ((dirty & (1 << i)) &&
- flush_tid == ci->i_cap_flush_tid[i])
+ (u16)flush_tid == ci->i_cap_flush_tid[i])
cleaned |= 1 << i;
dout("handle_cap_flush_ack inode %p mds%d seq %d on %s cleaned %s,"
struct dentry *parent = lock_parent(dentry);
if (likely(!dentry->d_lockref.count)) {
__dentry_kill(dentry);
+ dput(parent);
goto restart;
}
if (parent)
if (!IS_ROOT(new)) {
spin_unlock(&inode->i_lock);
dput(new);
+ iput(inode);
return ERR_PTR(-EIO);
}
if (d_ancestor(new, dentry)) {
spin_unlock(&inode->i_lock);
dput(new);
+ iput(inode);
return ERR_PTR(-EIO);
}
write_seqlock(&rename_lock);
s->s_maxbytes = path.dentry->d_sb->s_maxbytes;
s->s_blocksize = path.dentry->d_sb->s_blocksize;
s->s_magic = ECRYPTFS_SUPER_MAGIC;
+ s->s_stack_depth = path.dentry->d_sb->s_stack_depth + 1;
+
+ rc = -EINVAL;
+ if (s->s_stack_depth > FILESYSTEM_MAX_STACK_DEPTH) {
+ pr_err("eCryptfs: maximum fs stacking depth exceeded\n");
+ goto out_free;
+ }
inode = ecryptfs_get_inode(path.dentry->d_inode, s);
rc = PTR_ERR(inode);
# Copyright (C) 2008 Panasas Inc. All rights reserved.
#
# Authors:
-# Boaz Harrosh <bharrosh@panasas.com>
+# Boaz Harrosh <ooo@electrozaur.com>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License version 2
* Copyright (C) 2005, 2006
* Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
- * Boaz Harrosh <bharrosh@panasas.com>
+ * Boaz Harrosh <ooo@electrozaur.com>
*
* Copyrights for code taken from ext2:
* Copyright (C) 1992, 1993, 1994, 1995
* Copyright (C) 2005, 2006
* Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
- * Boaz Harrosh <bharrosh@panasas.com>
+ * Boaz Harrosh <ooo@electrozaur.com>
*
* Copyrights for code taken from ext2:
* Copyright (C) 1992, 1993, 1994, 1995
* Copyright (C) 2005, 2006
* Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
- * Boaz Harrosh <bharrosh@panasas.com>
+ * Boaz Harrosh <ooo@electrozaur.com>
*
* Copyrights for code taken from ext2:
* Copyright (C) 1992, 1993, 1994, 1995
* Copyright (C) 2005, 2006
* Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
- * Boaz Harrosh <bharrosh@panasas.com>
+ * Boaz Harrosh <ooo@electrozaur.com>
*
* Copyrights for code taken from ext2:
* Copyright (C) 1992, 1993, 1994, 1995
* Copyright (C) 2005, 2006
* Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
- * Boaz Harrosh <bharrosh@panasas.com>
+ * Boaz Harrosh <ooo@electrozaur.com>
*
* Copyrights for code taken from ext2:
* Copyright (C) 1992, 1993, 1994, 1995
* Copyright (C) 2005, 2006
* Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
- * Boaz Harrosh <bharrosh@panasas.com>
+ * Boaz Harrosh <ooo@electrozaur.com>
*
* Copyrights for code taken from ext2:
* Copyright (C) 1992, 1993, 1994, 1995
* Copyright (C) 2005, 2006
* Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
- * Boaz Harrosh <bharrosh@panasas.com>
+ * Boaz Harrosh <ooo@electrozaur.com>
*
* This file is part of exofs.
*
#include "ore_raid.h"
-MODULE_AUTHOR("Boaz Harrosh <bharrosh@panasas.com>");
+MODULE_AUTHOR("Boaz Harrosh <ooo@electrozaur.com>");
MODULE_DESCRIPTION("Objects Raid Engine ore.ko");
MODULE_LICENSE("GPL");
/*
* Copyright (C) 2011
- * Boaz Harrosh <bharrosh@panasas.com>
+ * Boaz Harrosh <ooo@electrozaur.com>
*
* This file is part of the objects raid engine (ore).
*
/*
* Copyright (C) from 2011
- * Boaz Harrosh <bharrosh@panasas.com>
+ * Boaz Harrosh <ooo@electrozaur.com>
*
* This file is part of the objects raid engine (ore).
*
* Copyright (C) 2005, 2006
* Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
- * Boaz Harrosh <bharrosh@panasas.com>
+ * Boaz Harrosh <ooo@electrozaur.com>
*
* Copyrights for code taken from ext2:
* Copyright (C) 1992, 1993, 1994, 1995
* Copyright (C) 2005, 2006
* Avishay Traeger (avishay@gmail.com)
* Copyright (C) 2008, 2009
- * Boaz Harrosh <bharrosh@panasas.com>
+ * Boaz Harrosh <ooo@electrozaur.com>
*
* Copyrights for code taken from ext2:
* Copyright (C) 1992, 1993, 1994, 1995
/*
* Copyright (C) 2012
* Sachin Bhamare <sbhamare@panasas.com>
- * Boaz Harrosh <bharrosh@panasas.com>
+ * Boaz Harrosh <ooo@electrozaur.com>
*
* This file is part of exofs.
*
"not specified.");
return 0;
}
- } else {
- if (sbi->s_jquota_fmt) {
- ext3_msg(sb, KERN_ERR, "error: journaled quota format "
- "specified with no journaling "
- "enabled.");
- return 0;
- }
}
#endif
return 1;
}
/* Initializes an uninitialized block bitmap */
-static void ext4_init_block_bitmap(struct super_block *sb,
+static int ext4_init_block_bitmap(struct super_block *sb,
struct buffer_head *bh,
ext4_group_t block_group,
struct ext4_group_desc *gdp)
/* If checksum is bad mark all blocks used to prevent allocation
* essentially implementing a per-group read-only flag. */
if (!ext4_group_desc_csum_verify(sb, block_group, gdp)) {
- ext4_error(sb, "Checksum bad for group %u", block_group);
grp = ext4_get_group_info(sb, block_group);
if (!EXT4_MB_GRP_BBITMAP_CORRUPT(grp))
percpu_counter_sub(&sbi->s_freeclusters_counter,
count);
}
set_bit(EXT4_GROUP_INFO_IBITMAP_CORRUPT_BIT, &grp->bb_state);
- return;
+ return -EIO;
}
memset(bh->b_data, 0, sb->s_blocksize);
sb->s_blocksize * 8, bh->b_data);
ext4_block_bitmap_csum_set(sb, block_group, gdp, bh);
ext4_group_desc_csum_set(sb, block_group, gdp);
+ return 0;
}
/* Return the number of free blocks in a block group. It is used when
}
ext4_lock_group(sb, block_group);
if (desc->bg_flags & cpu_to_le16(EXT4_BG_BLOCK_UNINIT)) {
- ext4_init_block_bitmap(sb, bh, block_group, desc);
+ int err;
+
+ err = ext4_init_block_bitmap(sb, bh, block_group, desc);
set_bitmap_uptodate(bh);
set_buffer_uptodate(bh);
ext4_unlock_group(sb, block_group);
unlock_buffer(bh);
+ if (err)
+ ext4_error(sb, "Checksum bad for grp %u", block_group);
return bh;
}
ext4_unlock_group(sb, block_group);
* Account for the allocated meta blocks. We will never
* fail EDQUOT for metdata, but we do account for it.
*/
- if (!(*errp) &&
- ext4_test_inode_state(inode, EXT4_STATE_DELALLOC_RESERVED)) {
+ if (!(*errp) && (flags & EXT4_MB_DELALLOC_RESERVED)) {
spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
dquot_alloc_block_nofail(inode,
__u32 provided, calculated;
struct ext4_sb_info *sbi = EXT4_SB(sb);
- if (!EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ if (!ext4_has_metadata_csum(sb))
return 1;
provided = le16_to_cpu(gdp->bg_inode_bitmap_csum_lo);
__u32 csum;
struct ext4_sb_info *sbi = EXT4_SB(sb);
- if (!EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ if (!ext4_has_metadata_csum(sb))
return;
csum = ext4_chksum(sbi, sbi->s_csum_seed, (__u8 *)bh->b_data, sz);
struct ext4_sb_info *sbi = EXT4_SB(sb);
int sz = EXT4_CLUSTERS_PER_GROUP(sb) / 8;
- if (!EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ if (!ext4_has_metadata_csum(sb))
return 1;
provided = le16_to_cpu(gdp->bg_block_bitmap_csum_lo);
__u32 csum;
struct ext4_sb_info *sbi = EXT4_SB(sb);
- if (!EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ if (!ext4_has_metadata_csum(sb))
return;
csum = ext4_chksum(sbi, sbi->s_csum_seed, (__u8 *)bh->b_data, sz);
&file->f_ra, file,
index, 1);
file->f_ra.prev_pos = (loff_t)index << PAGE_CACHE_SHIFT;
- bh = ext4_bread(NULL, inode, map.m_lblk, 0, &err);
+ bh = ext4_bread(NULL, inode, map.m_lblk, 0);
+ if (IS_ERR(bh))
+ return PTR_ERR(bh);
}
- /*
- * We ignore I/O errors on directories so users have a chance
- * of recovering data when there's a bad sector
- */
if (!bh) {
if (!dir_has_error) {
EXT4_ERROR_FILE(file, 0,
/*
* The bit position of these flags must not overlap with any of the
- * EXT4_GET_BLOCKS_*. They are used by ext4_ext_find_extent(),
+ * EXT4_GET_BLOCKS_*. They are used by ext4_find_extent(),
* read_extent_tree_block(), ext4_split_extent_at(),
* ext4_ext_insert_extent(), and ext4_ext_create_new_leaf().
* EXT4_EX_NOCACHE is used to indicate that the we shouldn't be
* caching the extents when reading from the extent tree while a
* truncate or punch hole operation is in progress.
*/
-#define EXT4_EX_NOCACHE 0x0400
-#define EXT4_EX_FORCE_CACHE 0x0800
+#define EXT4_EX_NOCACHE 0x40000000
+#define EXT4_EX_FORCE_CACHE 0x20000000
/*
* Flags used by ext4_free_blocks
struct ext4_es_tree i_es_tree;
rwlock_t i_es_lock;
struct list_head i_es_lru;
+ unsigned int i_es_all_nr; /* protected by i_es_lock */
unsigned int i_es_lru_nr; /* protected by i_es_lock */
unsigned long i_touch_when; /* jiffies of last accessing */
#define EXT4_MF_MNTDIR_SAMPLED 0x0001
#define EXT4_MF_FS_ABORTED 0x0002 /* Fatal error detected */
+/* Number of quota types we support */
+#define EXT4_MAXQUOTAS 2
+
/*
* fourth extended-fs super-block data in memory
*/
u32 s_min_batch_time;
struct block_device *journal_bdev;
#ifdef CONFIG_QUOTA
- char *s_qf_names[MAXQUOTAS]; /* Names of quota files with journalled quota */
+ char *s_qf_names[EXT4_MAXQUOTAS]; /* Names of quota files with journalled quota */
int s_jquota_fmt; /* Format of quota to use */
#endif
unsigned int s_want_extra_isize; /* New inodes should reserve # bytes */
/* Reclaim extents from extent status tree */
struct shrinker s_es_shrinker;
struct list_head s_es_lru;
- unsigned long s_es_last_sorted;
- struct percpu_counter s_extent_cache_cnt;
+ struct ext4_es_stats s_es_stats;
struct mb_cache *s_mb_cache;
spinlock_t s_es_lru_lock ____cacheline_aligned_in_smp;
EXT4_STATE_EXT_MIGRATE, /* Inode is migrating */
EXT4_STATE_DIO_UNWRITTEN, /* need convert on dio done*/
EXT4_STATE_NEWENTRY, /* File just added to dir */
- EXT4_STATE_DELALLOC_RESERVED, /* blks already reserved for delalloc */
EXT4_STATE_DIOREAD_LOCK, /* Disable support for dio read
nolocking */
EXT4_STATE_MAY_INLINE_DATA, /* may have in-inode data */
extern int ext4_trim_fs(struct super_block *, struct fstrim_range *);
/* inode.c */
-struct buffer_head *ext4_getblk(handle_t *, struct inode *,
- ext4_lblk_t, int, int *);
-struct buffer_head *ext4_bread(handle_t *, struct inode *,
- ext4_lblk_t, int, int *);
+struct buffer_head *ext4_getblk(handle_t *, struct inode *, ext4_lblk_t, int);
+struct buffer_head *ext4_bread(handle_t *, struct inode *, ext4_lblk_t, int);
int ext4_get_block_write(struct inode *inode, sector_t iblock,
struct buffer_head *bh_result, int create);
int ext4_get_block(struct inode *inode, sector_t iblock,
#define CONVERT_INLINE_DATA 2
extern struct inode *ext4_iget(struct super_block *, unsigned long);
+extern struct inode *ext4_iget_normal(struct super_block *, unsigned long);
extern int ext4_write_inode(struct inode *, struct writeback_control *);
extern int ext4_setattr(struct dentry *, struct iattr *);
extern int ext4_getattr(struct vfsmount *mnt, struct dentry *dentry,
static inline int ext4_has_group_desc_csum(struct super_block *sb)
{
return EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_GDT_CSUM |
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM);
+ EXT4_FEATURE_RO_COMPAT_GDT_CSUM) ||
+ (EXT4_SB(sb)->s_chksum_driver != NULL);
}
+static inline int ext4_has_metadata_csum(struct super_block *sb)
+{
+ WARN_ON_ONCE(EXT4_HAS_RO_COMPAT_FEATURE(sb,
+ EXT4_FEATURE_RO_COMPAT_METADATA_CSUM) &&
+ !EXT4_SB(sb)->s_chksum_driver);
+
+ return (EXT4_SB(sb)->s_chksum_driver != NULL);
+}
static inline ext4_fsblk_t ext4_blocks_count(struct ext4_super_block *es)
{
return ((ext4_fsblk_t)le32_to_cpu(es->s_blocks_count_hi) << 32) |
struct ext4_extent *ex1,
struct ext4_extent *ex2);
extern int ext4_ext_insert_extent(handle_t *, struct inode *,
- struct ext4_ext_path *,
+ struct ext4_ext_path **,
struct ext4_extent *, int);
-extern struct ext4_ext_path *ext4_ext_find_extent(struct inode *, ext4_lblk_t,
- struct ext4_ext_path *,
- int flags);
+extern struct ext4_ext_path *ext4_find_extent(struct inode *, ext4_lblk_t,
+ struct ext4_ext_path **,
+ int flags);
extern void ext4_ext_drop_refs(struct ext4_ext_path *);
extern int ext4_ext_check_inode(struct inode *inode);
extern int ext4_find_delalloc_range(struct inode *inode,
ext4_lblk_t lblk_start,
ext4_lblk_t lblk_end);
extern int ext4_find_delalloc_cluster(struct inode *inode, ext4_lblk_t lblk);
+extern ext4_lblk_t ext4_ext_next_allocated_block(struct ext4_ext_path *path);
extern int ext4_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo,
__u64 start, __u64 len);
extern int ext4_ext_precache(struct inode *inode);
extern int ext4_collapse_range(struct inode *inode, loff_t offset, loff_t len);
+extern int ext4_swap_extents(handle_t *handle, struct inode *inode1,
+ struct inode *inode2, ext4_lblk_t lblk1,
+ ext4_lblk_t lblk2, ext4_lblk_t count,
+ int mark_unwritten,int *err);
/* move_extent.c */
extern void ext4_double_down_write_data_sem(struct inode *first,
extern int ext4_move_extents(struct file *o_filp, struct file *d_filp,
__u64 start_orig, __u64 start_donor,
__u64 len, __u64 *moved_len);
-extern int mext_next_extent(struct inode *inode, struct ext4_ext_path *path,
- struct ext4_extent **extent);
/* page-io.c */
extern int __init ext4_init_pageio(void);
struct ext4_ext_path {
ext4_fsblk_t p_block;
__u16 p_depth;
+ __u16 p_maxdepth;
struct ext4_extent *p_ext;
struct ext4_extent_idx *p_idx;
struct ext4_extent_header *p_hdr;
set_buffer_prio(bh);
if (ext4_handle_valid(handle)) {
err = jbd2_journal_dirty_metadata(handle, bh);
- /* Errors can only happen if there is a bug */
- if (WARN_ON_ONCE(err)) {
+ /* Errors can only happen due to aborted journal or a nasty bug */
+ if (!is_handle_aborted(handle) && WARN_ON_ONCE(err)) {
ext4_journal_abort_handle(where, line, __func__, bh,
handle, err);
if (inode == NULL) {
#define EXT4_QUOTA_INIT_BLOCKS(sb) 0
#define EXT4_QUOTA_DEL_BLOCKS(sb) 0
#endif
-#define EXT4_MAXQUOTAS_TRANS_BLOCKS(sb) (MAXQUOTAS*EXT4_QUOTA_TRANS_BLOCKS(sb))
-#define EXT4_MAXQUOTAS_INIT_BLOCKS(sb) (MAXQUOTAS*EXT4_QUOTA_INIT_BLOCKS(sb))
-#define EXT4_MAXQUOTAS_DEL_BLOCKS(sb) (MAXQUOTAS*EXT4_QUOTA_DEL_BLOCKS(sb))
+#define EXT4_MAXQUOTAS_TRANS_BLOCKS(sb) (EXT4_MAXQUOTAS*EXT4_QUOTA_TRANS_BLOCKS(sb))
+#define EXT4_MAXQUOTAS_INIT_BLOCKS(sb) (EXT4_MAXQUOTAS*EXT4_QUOTA_INIT_BLOCKS(sb))
+#define EXT4_MAXQUOTAS_DEL_BLOCKS(sb) (EXT4_MAXQUOTAS*EXT4_QUOTA_DEL_BLOCKS(sb))
static inline int ext4_jbd2_credits_xattr(struct inode *inode)
{
{
struct ext4_extent_tail *et;
- if (!EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ if (!ext4_has_metadata_csum(inode->i_sb))
return 1;
et = find_ext4_extent_tail(eh);
{
struct ext4_extent_tail *et;
- if (!EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ if (!ext4_has_metadata_csum(inode->i_sb))
return;
et = find_ext4_extent_tail(eh);
static int ext4_split_extent(handle_t *handle,
struct inode *inode,
- struct ext4_ext_path *path,
+ struct ext4_ext_path **ppath,
struct ext4_map_blocks *map,
int split_flag,
int flags);
static int ext4_split_extent_at(handle_t *handle,
struct inode *inode,
- struct ext4_ext_path *path,
+ struct ext4_ext_path **ppath,
ext4_lblk_t split,
int split_flag,
int flags);
return size;
}
+static inline int
+ext4_force_split_extent_at(handle_t *handle, struct inode *inode,
+ struct ext4_ext_path **ppath, ext4_lblk_t lblk,
+ int nofail)
+{
+ struct ext4_ext_path *path = *ppath;
+ int unwritten = ext4_ext_is_unwritten(path[path->p_depth].p_ext);
+
+ return ext4_split_extent_at(handle, inode, ppath, lblk, unwritten ?
+ EXT4_EXT_MARK_UNWRIT1|EXT4_EXT_MARK_UNWRIT2 : 0,
+ EXT4_EX_NOCACHE | EXT4_GET_BLOCKS_PRE_IO |
+ (nofail ? EXT4_GET_BLOCKS_METADATA_NOFAIL:0));
+}
+
/*
* Calculate the number of metadata blocks needed
* to allocate @blocks
void ext4_ext_drop_refs(struct ext4_ext_path *path)
{
- int depth = path->p_depth;
- int i;
+ int depth, i;
+ if (!path)
+ return;
+ depth = path->p_depth;
for (i = 0; i <= depth; i++, path++)
if (path->p_bh) {
brelse(path->p_bh);
}
struct ext4_ext_path *
-ext4_ext_find_extent(struct inode *inode, ext4_lblk_t block,
- struct ext4_ext_path *path, int flags)
+ext4_find_extent(struct inode *inode, ext4_lblk_t block,
+ struct ext4_ext_path **orig_path, int flags)
{
struct ext4_extent_header *eh;
struct buffer_head *bh;
- short int depth, i, ppos = 0, alloc = 0;
+ struct ext4_ext_path *path = orig_path ? *orig_path : NULL;
+ short int depth, i, ppos = 0;
int ret;
eh = ext_inode_hdr(inode);
depth = ext_depth(inode);
- /* account possible depth increase */
+ if (path) {
+ ext4_ext_drop_refs(path);
+ if (depth > path[0].p_maxdepth) {
+ kfree(path);
+ *orig_path = path = NULL;
+ }
+ }
if (!path) {
+ /* account possible depth increase */
path = kzalloc(sizeof(struct ext4_ext_path) * (depth + 2),
GFP_NOFS);
- if (!path)
+ if (unlikely(!path))
return ERR_PTR(-ENOMEM);
- alloc = 1;
+ path[0].p_maxdepth = depth + 1;
}
path[0].p_hdr = eh;
path[0].p_bh = NULL;
bh = read_extent_tree_block(inode, path[ppos].p_block, --i,
flags);
- if (IS_ERR(bh)) {
+ if (unlikely(IS_ERR(bh))) {
ret = PTR_ERR(bh);
goto err;
}
err:
ext4_ext_drop_refs(path);
- if (alloc)
- kfree(path);
+ kfree(path);
+ if (orig_path)
+ *orig_path = NULL;
return ERR_PTR(ret);
}
* just created block
*/
static int ext4_ext_grow_indepth(handle_t *handle, struct inode *inode,
- unsigned int flags,
- struct ext4_extent *newext)
+ unsigned int flags)
{
struct ext4_extent_header *neh;
struct buffer_head *bh;
- ext4_fsblk_t newblock;
+ ext4_fsblk_t newblock, goal = 0;
+ struct ext4_super_block *es = EXT4_SB(inode->i_sb)->s_es;
int err = 0;
- newblock = ext4_ext_new_meta_block(handle, inode, NULL,
- newext, &err, flags);
+ /* Try to prepend new index to old one */
+ if (ext_depth(inode))
+ goal = ext4_idx_pblock(EXT_FIRST_INDEX(ext_inode_hdr(inode)));
+ if (goal > le32_to_cpu(es->s_first_data_block)) {
+ flags |= EXT4_MB_HINT_TRY_GOAL;
+ goal--;
+ } else
+ goal = ext4_inode_to_goal_block(inode);
+ newblock = ext4_new_meta_blocks(handle, inode, goal, flags,
+ NULL, &err);
if (newblock == 0)
return err;
static int ext4_ext_create_new_leaf(handle_t *handle, struct inode *inode,
unsigned int mb_flags,
unsigned int gb_flags,
- struct ext4_ext_path *path,
+ struct ext4_ext_path **ppath,
struct ext4_extent *newext)
{
+ struct ext4_ext_path *path = *ppath;
struct ext4_ext_path *curp;
int depth, i, err = 0;
goto out;
/* refill path */
- ext4_ext_drop_refs(path);
- path = ext4_ext_find_extent(inode,
+ path = ext4_find_extent(inode,
(ext4_lblk_t)le32_to_cpu(newext->ee_block),
- path, gb_flags);
+ ppath, gb_flags);
if (IS_ERR(path))
err = PTR_ERR(path);
} else {
/* tree is full, time to grow in depth */
- err = ext4_ext_grow_indepth(handle, inode, mb_flags, newext);
+ err = ext4_ext_grow_indepth(handle, inode, mb_flags);
if (err)
goto out;
/* refill path */
- ext4_ext_drop_refs(path);
- path = ext4_ext_find_extent(inode,
+ path = ext4_find_extent(inode,
(ext4_lblk_t)le32_to_cpu(newext->ee_block),
- path, gb_flags);
+ ppath, gb_flags);
if (IS_ERR(path)) {
err = PTR_ERR(path);
goto out;
* allocated block. Thus, index entries have to be consistent
* with leaves.
*/
-static ext4_lblk_t
+ext4_lblk_t
ext4_ext_next_allocated_block(struct ext4_ext_path *path)
{
int depth;
sizeof(struct ext4_extent_idx);
s += sizeof(struct ext4_extent_header);
+ path[1].p_maxdepth = path[0].p_maxdepth;
memcpy(path[0].p_hdr, path[1].p_hdr, s);
path[0].p_depth = 0;
path[0].p_ext = EXT_FIRST_EXTENT(path[0].p_hdr) +
* creating new leaf in the no-space case.
*/
int ext4_ext_insert_extent(handle_t *handle, struct inode *inode,
- struct ext4_ext_path *path,
+ struct ext4_ext_path **ppath,
struct ext4_extent *newext, int gb_flags)
{
+ struct ext4_ext_path *path = *ppath;
struct ext4_extent_header *eh;
struct ext4_extent *ex, *fex;
struct ext4_extent *nearex; /* nearest extent */
ext4_lblk_t next;
int mb_flags = 0, unwritten;
+ if (gb_flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
+ mb_flags |= EXT4_MB_DELALLOC_RESERVED;
if (unlikely(ext4_ext_get_actual_len(newext) == 0)) {
EXT4_ERROR_INODE(inode, "ext4_ext_get_actual_len(newext) == 0");
return -EIO;
/*
* Try to see whether we should rather test the extent on
* right from ex, or from the left of ex. This is because
- * ext4_ext_find_extent() can return either extent on the
+ * ext4_find_extent() can return either extent on the
* left, or on the right from the searched position. This
* will make merging more effective.
*/
if (next != EXT_MAX_BLOCKS) {
ext_debug("next leaf block - %u\n", next);
BUG_ON(npath != NULL);
- npath = ext4_ext_find_extent(inode, next, NULL, 0);
+ npath = ext4_find_extent(inode, next, NULL, 0);
if (IS_ERR(npath))
return PTR_ERR(npath);
BUG_ON(npath->p_depth != path->p_depth);
* We're gonna add a new leaf in the tree.
*/
if (gb_flags & EXT4_GET_BLOCKS_METADATA_NOFAIL)
- mb_flags = EXT4_MB_USE_RESERVED;
+ mb_flags |= EXT4_MB_USE_RESERVED;
err = ext4_ext_create_new_leaf(handle, inode, mb_flags, gb_flags,
- path, newext);
+ ppath, newext);
if (err)
goto cleanup;
depth = ext_depth(inode);
err = ext4_ext_dirty(handle, inode, path + path->p_depth);
cleanup:
- if (npath) {
- ext4_ext_drop_refs(npath);
- kfree(npath);
- }
+ ext4_ext_drop_refs(npath);
+ kfree(npath);
return err;
}
/* find extent for this block */
down_read(&EXT4_I(inode)->i_data_sem);
- if (path && ext_depth(inode) != depth) {
- /* depth was changed. we have to realloc path */
- kfree(path);
- path = NULL;
- }
-
- path = ext4_ext_find_extent(inode, block, path, 0);
+ path = ext4_find_extent(inode, block, &path, 0);
if (IS_ERR(path)) {
up_read(&EXT4_I(inode)->i_data_sem);
err = PTR_ERR(path);
}
ex = path[depth].p_ext;
next = ext4_ext_next_allocated_block(path);
- ext4_ext_drop_refs(path);
flags = 0;
exists = 0;
block = es.es_lblk + es.es_len;
}
- if (path) {
- ext4_ext_drop_refs(path);
- kfree(path);
- }
-
+ ext4_ext_drop_refs(path);
+ kfree(path);
return err;
}
ext4_lblk_t ee_block;
/* find extent for this block */
- path = ext4_ext_find_extent(inode, end, NULL, EXT4_EX_NOCACHE);
+ path = ext4_find_extent(inode, end, NULL, EXT4_EX_NOCACHE);
if (IS_ERR(path)) {
ext4_journal_stop(handle);
return PTR_ERR(path);
*/
if (end >= ee_block &&
end < ee_block + ext4_ext_get_actual_len(ex) - 1) {
- int split_flag = 0;
-
- if (ext4_ext_is_unwritten(ex))
- split_flag = EXT4_EXT_MARK_UNWRIT1 |
- EXT4_EXT_MARK_UNWRIT2;
-
/*
* Split the extent in two so that 'end' is the last
* block in the first new extent. Also we should not
* fail removing space due to ENOSPC so try to use
* reserved block if that happens.
*/
- err = ext4_split_extent_at(handle, inode, path,
- end + 1, split_flag,
- EXT4_EX_NOCACHE |
- EXT4_GET_BLOCKS_PRE_IO |
- EXT4_GET_BLOCKS_METADATA_NOFAIL);
-
+ err = ext4_force_split_extent_at(handle, inode, &path,
+ end + 1, 1);
if (err < 0)
goto out;
}
ext4_journal_stop(handle);
return -ENOMEM;
}
- path[0].p_depth = depth;
+ path[0].p_maxdepth = path[0].p_depth = depth;
path[0].p_hdr = ext_inode_hdr(inode);
i = 0;
out:
ext4_ext_drop_refs(path);
kfree(path);
- if (err == -EAGAIN) {
- path = NULL;
+ path = NULL;
+ if (err == -EAGAIN)
goto again;
- }
ext4_journal_stop(handle);
return err;
*/
static int ext4_split_extent_at(handle_t *handle,
struct inode *inode,
- struct ext4_ext_path *path,
+ struct ext4_ext_path **ppath,
ext4_lblk_t split,
int split_flag,
int flags)
{
+ struct ext4_ext_path *path = *ppath;
ext4_fsblk_t newblock;
ext4_lblk_t ee_block;
struct ext4_extent *ex, newex, orig_ex, zero_ex;
if (split_flag & EXT4_EXT_MARK_UNWRIT2)
ext4_ext_mark_unwritten(ex2);
- err = ext4_ext_insert_extent(handle, inode, path, &newex, flags);
+ err = ext4_ext_insert_extent(handle, inode, ppath, &newex, flags);
if (err == -ENOSPC && (EXT4_EXT_MAY_ZEROOUT & split_flag)) {
if (split_flag & (EXT4_EXT_DATA_VALID1|EXT4_EXT_DATA_VALID2)) {
if (split_flag & EXT4_EXT_DATA_VALID1) {
*/
static int ext4_split_extent(handle_t *handle,
struct inode *inode,
- struct ext4_ext_path *path,
+ struct ext4_ext_path **ppath,
struct ext4_map_blocks *map,
int split_flag,
int flags)
{
+ struct ext4_ext_path *path = *ppath;
ext4_lblk_t ee_block;
struct ext4_extent *ex;
unsigned int ee_len, depth;
EXT4_EXT_MARK_UNWRIT2;
if (split_flag & EXT4_EXT_DATA_VALID2)
split_flag1 |= EXT4_EXT_DATA_VALID1;
- err = ext4_split_extent_at(handle, inode, path,
+ err = ext4_split_extent_at(handle, inode, ppath,
map->m_lblk + map->m_len, split_flag1, flags1);
if (err)
goto out;
* Update path is required because previous ext4_split_extent_at() may
* result in split of original leaf or extent zeroout.
*/
- ext4_ext_drop_refs(path);
- path = ext4_ext_find_extent(inode, map->m_lblk, path, 0);
+ path = ext4_find_extent(inode, map->m_lblk, ppath, 0);
if (IS_ERR(path))
return PTR_ERR(path);
depth = ext_depth(inode);
split_flag1 |= split_flag & (EXT4_EXT_MAY_ZEROOUT |
EXT4_EXT_MARK_UNWRIT2);
}
- err = ext4_split_extent_at(handle, inode, path,
+ err = ext4_split_extent_at(handle, inode, ppath,
map->m_lblk, split_flag1, flags);
if (err)
goto out;
static int ext4_ext_convert_to_initialized(handle_t *handle,
struct inode *inode,
struct ext4_map_blocks *map,
- struct ext4_ext_path *path,
+ struct ext4_ext_path **ppath,
int flags)
{
+ struct ext4_ext_path *path = *ppath;
struct ext4_sb_info *sbi;
struct ext4_extent_header *eh;
struct ext4_map_blocks split_map;
}
}
- allocated = ext4_split_extent(handle, inode, path,
- &split_map, split_flag, flags);
- if (allocated < 0)
- err = allocated;
-
+ err = ext4_split_extent(handle, inode, ppath, &split_map, split_flag,
+ flags);
+ if (err > 0)
+ err = 0;
out:
/* If we have gotten a failure, don't zero out status tree */
if (!err)
static int ext4_split_convert_extents(handle_t *handle,
struct inode *inode,
struct ext4_map_blocks *map,
- struct ext4_ext_path *path,
+ struct ext4_ext_path **ppath,
int flags)
{
+ struct ext4_ext_path *path = *ppath;
ext4_lblk_t eof_block;
ext4_lblk_t ee_block;
struct ext4_extent *ex;
split_flag |= (EXT4_EXT_MARK_UNWRIT2 | EXT4_EXT_DATA_VALID2);
}
flags |= EXT4_GET_BLOCKS_PRE_IO;
- return ext4_split_extent(handle, inode, path, map, split_flag, flags);
+ return ext4_split_extent(handle, inode, ppath, map, split_flag, flags);
}
-static int ext4_convert_initialized_extents(handle_t *handle,
- struct inode *inode,
- struct ext4_map_blocks *map,
- struct ext4_ext_path *path)
-{
- struct ext4_extent *ex;
- ext4_lblk_t ee_block;
- unsigned int ee_len;
- int depth;
- int err = 0;
-
- depth = ext_depth(inode);
- ex = path[depth].p_ext;
- ee_block = le32_to_cpu(ex->ee_block);
- ee_len = ext4_ext_get_actual_len(ex);
-
- ext_debug("%s: inode %lu, logical"
- "block %llu, max_blocks %u\n", __func__, inode->i_ino,
- (unsigned long long)ee_block, ee_len);
-
- if (ee_block != map->m_lblk || ee_len > map->m_len) {
- err = ext4_split_convert_extents(handle, inode, map, path,
- EXT4_GET_BLOCKS_CONVERT_UNWRITTEN);
- if (err < 0)
- goto out;
- ext4_ext_drop_refs(path);
- path = ext4_ext_find_extent(inode, map->m_lblk, path, 0);
- if (IS_ERR(path)) {
- err = PTR_ERR(path);
- goto out;
- }
- depth = ext_depth(inode);
- ex = path[depth].p_ext;
- if (!ex) {
- EXT4_ERROR_INODE(inode, "unexpected hole at %lu",
- (unsigned long) map->m_lblk);
- err = -EIO;
- goto out;
- }
- }
-
- err = ext4_ext_get_access(handle, inode, path + depth);
- if (err)
- goto out;
- /* first mark the extent as unwritten */
- ext4_ext_mark_unwritten(ex);
-
- /* note: ext4_ext_correct_indexes() isn't needed here because
- * borders are not changed
- */
- ext4_ext_try_to_merge(handle, inode, path, ex);
-
- /* Mark modified extent as dirty */
- err = ext4_ext_dirty(handle, inode, path + path->p_depth);
-out:
- ext4_ext_show_leaf(inode, path);
- return err;
-}
-
-
static int ext4_convert_unwritten_extents_endio(handle_t *handle,
struct inode *inode,
struct ext4_map_blocks *map,
- struct ext4_ext_path *path)
+ struct ext4_ext_path **ppath)
{
+ struct ext4_ext_path *path = *ppath;
struct ext4_extent *ex;
ext4_lblk_t ee_block;
unsigned int ee_len;
inode->i_ino, (unsigned long long)ee_block, ee_len,
(unsigned long long)map->m_lblk, map->m_len);
#endif
- err = ext4_split_convert_extents(handle, inode, map, path,
+ err = ext4_split_convert_extents(handle, inode, map, ppath,
EXT4_GET_BLOCKS_CONVERT);
if (err < 0)
- goto out;
- ext4_ext_drop_refs(path);
- path = ext4_ext_find_extent(inode, map->m_lblk, path, 0);
- if (IS_ERR(path)) {
- err = PTR_ERR(path);
- goto out;
- }
+ return err;
+ path = ext4_find_extent(inode, map->m_lblk, ppath, 0);
+ if (IS_ERR(path))
+ return PTR_ERR(path);
depth = ext_depth(inode);
ex = path[depth].p_ext;
}
}
static int
-ext4_ext_convert_initialized_extent(handle_t *handle, struct inode *inode,
- struct ext4_map_blocks *map,
- struct ext4_ext_path *path, int flags,
- unsigned int allocated, ext4_fsblk_t newblock)
+convert_initialized_extent(handle_t *handle, struct inode *inode,
+ struct ext4_map_blocks *map,
+ struct ext4_ext_path **ppath, int flags,
+ unsigned int allocated, ext4_fsblk_t newblock)
{
- int ret = 0;
+ struct ext4_ext_path *path = *ppath;
+ struct ext4_extent *ex;
+ ext4_lblk_t ee_block;
+ unsigned int ee_len;
+ int depth;
int err = 0;
/*
if (map->m_len > EXT_UNWRITTEN_MAX_LEN)
map->m_len = EXT_UNWRITTEN_MAX_LEN / 2;
- ret = ext4_convert_initialized_extents(handle, inode, map,
- path);
- if (ret >= 0) {
- ext4_update_inode_fsync_trans(handle, inode, 1);
- err = check_eofblocks_fl(handle, inode, map->m_lblk,
- path, map->m_len);
- } else
- err = ret;
+ depth = ext_depth(inode);
+ ex = path[depth].p_ext;
+ ee_block = le32_to_cpu(ex->ee_block);
+ ee_len = ext4_ext_get_actual_len(ex);
+
+ ext_debug("%s: inode %lu, logical"
+ "block %llu, max_blocks %u\n", __func__, inode->i_ino,
+ (unsigned long long)ee_block, ee_len);
+
+ if (ee_block != map->m_lblk || ee_len > map->m_len) {
+ err = ext4_split_convert_extents(handle, inode, map, ppath,
+ EXT4_GET_BLOCKS_CONVERT_UNWRITTEN);
+ if (err < 0)
+ return err;
+ path = ext4_find_extent(inode, map->m_lblk, ppath, 0);
+ if (IS_ERR(path))
+ return PTR_ERR(path);
+ depth = ext_depth(inode);
+ ex = path[depth].p_ext;
+ if (!ex) {
+ EXT4_ERROR_INODE(inode, "unexpected hole at %lu",
+ (unsigned long) map->m_lblk);
+ return -EIO;
+ }
+ }
+
+ err = ext4_ext_get_access(handle, inode, path + depth);
+ if (err)
+ return err;
+ /* first mark the extent as unwritten */
+ ext4_ext_mark_unwritten(ex);
+
+ /* note: ext4_ext_correct_indexes() isn't needed here because
+ * borders are not changed
+ */
+ ext4_ext_try_to_merge(handle, inode, path, ex);
+
+ /* Mark modified extent as dirty */
+ err = ext4_ext_dirty(handle, inode, path + path->p_depth);
+ if (err)
+ return err;
+ ext4_ext_show_leaf(inode, path);
+
+ ext4_update_inode_fsync_trans(handle, inode, 1);
+ err = check_eofblocks_fl(handle, inode, map->m_lblk, path, map->m_len);
+ if (err)
+ return err;
map->m_flags |= EXT4_MAP_UNWRITTEN;
if (allocated > map->m_len)
allocated = map->m_len;
map->m_len = allocated;
-
- return err ? err : allocated;
+ return allocated;
}
static int
ext4_ext_handle_unwritten_extents(handle_t *handle, struct inode *inode,
struct ext4_map_blocks *map,
- struct ext4_ext_path *path, int flags,
+ struct ext4_ext_path **ppath, int flags,
unsigned int allocated, ext4_fsblk_t newblock)
{
+ struct ext4_ext_path *path = *ppath;
int ret = 0;
int err = 0;
ext4_io_end_t *io = ext4_inode_aio(inode);
/* get_block() before submit the IO, split the extent */
if (flags & EXT4_GET_BLOCKS_PRE_IO) {
- ret = ext4_split_convert_extents(handle, inode, map,
- path, flags | EXT4_GET_BLOCKS_CONVERT);
+ ret = ext4_split_convert_extents(handle, inode, map, ppath,
+ flags | EXT4_GET_BLOCKS_CONVERT);
if (ret <= 0)
goto out;
/*
/* IO end_io complete, convert the filled extent to written */
if (flags & EXT4_GET_BLOCKS_CONVERT) {
ret = ext4_convert_unwritten_extents_endio(handle, inode, map,
- path);
+ ppath);
if (ret >= 0) {
ext4_update_inode_fsync_trans(handle, inode, 1);
err = check_eofblocks_fl(handle, inode, map->m_lblk,
}
/* buffered write, writepage time, convert*/
- ret = ext4_ext_convert_to_initialized(handle, inode, map, path, flags);
+ ret = ext4_ext_convert_to_initialized(handle, inode, map, ppath, flags);
if (ret >= 0)
ext4_update_inode_fsync_trans(handle, inode, 1);
out:
trace_ext4_ext_map_blocks_enter(inode, map->m_lblk, map->m_len, flags);
/* find extent for this block */
- path = ext4_ext_find_extent(inode, map->m_lblk, NULL, 0);
+ path = ext4_find_extent(inode, map->m_lblk, NULL, 0);
if (IS_ERR(path)) {
err = PTR_ERR(path);
path = NULL;
/*
* consistent leaf must not be empty;
* this situation is possible, though, _during_ tree modification;
- * this is why assert can't be put in ext4_ext_find_extent()
+ * this is why assert can't be put in ext4_find_extent()
*/
if (unlikely(path[depth].p_ext == NULL && depth != 0)) {
EXT4_ERROR_INODE(inode, "bad extent address "
*/
if ((!ext4_ext_is_unwritten(ex)) &&
(flags & EXT4_GET_BLOCKS_CONVERT_UNWRITTEN)) {
- allocated = ext4_ext_convert_initialized_extent(
- handle, inode, map, path, flags,
- allocated, newblock);
+ allocated = convert_initialized_extent(
+ handle, inode, map, &path,
+ flags, allocated, newblock);
goto out2;
} else if (!ext4_ext_is_unwritten(ex))
goto out;
ret = ext4_ext_handle_unwritten_extents(
- handle, inode, map, path, flags,
+ handle, inode, map, &path, flags,
allocated, newblock);
if (ret < 0)
err = ret;
/*
* If we are doing bigalloc, check to see if the extent returned
- * by ext4_ext_find_extent() implies a cluster we can use.
+ * by ext4_find_extent() implies a cluster we can use.
*/
if (cluster_offset && ex &&
get_implied_cluster_alloc(inode->i_sb, map, ex, path)) {
ar.flags = 0;
if (flags & EXT4_GET_BLOCKS_NO_NORMALIZE)
ar.flags |= EXT4_MB_HINT_NOPREALLOC;
+ if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
+ ar.flags |= EXT4_MB_DELALLOC_RESERVED;
newblock = ext4_mb_new_blocks(handle, &ar, &err);
if (!newblock)
goto out2;
err = check_eofblocks_fl(handle, inode, map->m_lblk,
path, ar.len);
if (!err)
- err = ext4_ext_insert_extent(handle, inode, path,
+ err = ext4_ext_insert_extent(handle, inode, &path,
&newex, flags);
if (!err && set_unwritten) {
map->m_pblk = newblock;
map->m_len = allocated;
out2:
- if (path) {
- ext4_ext_drop_refs(path);
- kfree(path);
- }
+ ext4_ext_drop_refs(path);
+ kfree(path);
trace_ext4_ext_map_blocks_exit(inode, flags, map,
err ? err : allocated);
max_blocks -= lblk;
flags = EXT4_GET_BLOCKS_CREATE_UNWRIT_EXT |
- EXT4_GET_BLOCKS_CONVERT_UNWRITTEN;
+ EXT4_GET_BLOCKS_CONVERT_UNWRITTEN |
+ EXT4_EX_NOCACHE;
if (mode & FALLOC_FL_KEEP_SIZE)
flags |= EXT4_GET_BLOCKS_KEEP_SIZE;
ext4_inode_block_unlocked_dio(inode);
inode_dio_wait(inode);
+ ret = ext4_alloc_file_blocks(file, lblk, max_blocks, new_size,
+ flags, mode);
+ if (ret)
+ goto out_dio;
/*
* Remove entire range from the extent status tree.
+ *
+ * ext4_es_remove_extent(inode, lblk, max_blocks) is
+ * NOT sufficient. I'm not sure why this is the case,
+ * but let's be conservative and remove the extent
+ * status tree for the entire inode. There should be
+ * no outstanding delalloc extents thanks to the
+ * filemap_write_and_wait_range() call above.
*/
- ret = ext4_es_remove_extent(inode, lblk, max_blocks);
- if (ret)
- goto out_dio;
-
- ret = ext4_alloc_file_blocks(file, lblk, max_blocks, new_size,
- flags, mode);
+ ret = ext4_es_remove_extent(inode, 0, EXT_MAX_BLOCKS);
if (ret)
goto out_dio;
}
struct ext4_ext_path *path;
int ret = 0, depth;
struct ext4_extent *extent;
- ext4_lblk_t stop_block, current_block;
+ ext4_lblk_t stop_block;
ext4_lblk_t ex_start, ex_end;
/* Let path point to the last extent */
- path = ext4_ext_find_extent(inode, EXT_MAX_BLOCKS - 1, NULL, 0);
+ path = ext4_find_extent(inode, EXT_MAX_BLOCKS - 1, NULL, 0);
if (IS_ERR(path))
return PTR_ERR(path);
depth = path->p_depth;
extent = path[depth].p_ext;
- if (!extent) {
- ext4_ext_drop_refs(path);
- kfree(path);
- return ret;
- }
+ if (!extent)
+ goto out;
stop_block = le32_to_cpu(extent->ee_block) +
ext4_ext_get_actual_len(extent);
- ext4_ext_drop_refs(path);
- kfree(path);
/* Nothing to shift, if hole is at the end of file */
if (start >= stop_block)
- return ret;
+ goto out;
/*
* Don't start shifting extents until we make sure the hole is big
* enough to accomodate the shift.
*/
- path = ext4_ext_find_extent(inode, start - 1, NULL, 0);
+ path = ext4_find_extent(inode, start - 1, &path, 0);
if (IS_ERR(path))
return PTR_ERR(path);
depth = path->p_depth;
ex_start = 0;
ex_end = 0;
}
- ext4_ext_drop_refs(path);
- kfree(path);
if ((start == ex_start && shift > ex_start) ||
(shift > start - ex_end))
/* Its safe to start updating extents */
while (start < stop_block) {
- path = ext4_ext_find_extent(inode, start, NULL, 0);
+ path = ext4_find_extent(inode, start, &path, 0);
if (IS_ERR(path))
return PTR_ERR(path);
depth = path->p_depth;
(unsigned long) start);
return -EIO;
}
-
- current_block = le32_to_cpu(extent->ee_block);
- if (start > current_block) {
+ if (start > le32_to_cpu(extent->ee_block)) {
/* Hole, move to the next extent */
- ret = mext_next_extent(inode, path, &extent);
- if (ret != 0) {
- ext4_ext_drop_refs(path);
- kfree(path);
- if (ret == 1)
- ret = 0;
- break;
+ if (extent < EXT_LAST_EXTENT(path[depth].p_hdr)) {
+ path[depth].p_ext++;
+ } else {
+ start = ext4_ext_next_allocated_block(path);
+ continue;
}
}
ret = ext4_ext_shift_path_extents(path, shift, inode,
handle, &start);
- ext4_ext_drop_refs(path);
- kfree(path);
if (ret)
break;
}
-
+out:
+ ext4_ext_drop_refs(path);
+ kfree(path);
return ret;
}
mutex_unlock(&inode->i_mutex);
return ret;
}
+
+/**
+ * ext4_swap_extents - Swap extents between two inodes
+ *
+ * @inode1: First inode
+ * @inode2: Second inode
+ * @lblk1: Start block for first inode
+ * @lblk2: Start block for second inode
+ * @count: Number of blocks to swap
+ * @mark_unwritten: Mark second inode's extents as unwritten after swap
+ * @erp: Pointer to save error value
+ *
+ * This helper routine does exactly what is promise "swap extents". All other
+ * stuff such as page-cache locking consistency, bh mapping consistency or
+ * extent's data copying must be performed by caller.
+ * Locking:
+ * i_mutex is held for both inodes
+ * i_data_sem is locked for write for both inodes
+ * Assumptions:
+ * All pages from requested range are locked for both inodes
+ */
+int
+ext4_swap_extents(handle_t *handle, struct inode *inode1,
+ struct inode *inode2, ext4_lblk_t lblk1, ext4_lblk_t lblk2,
+ ext4_lblk_t count, int unwritten, int *erp)
+{
+ struct ext4_ext_path *path1 = NULL;
+ struct ext4_ext_path *path2 = NULL;
+ int replaced_count = 0;
+
+ BUG_ON(!rwsem_is_locked(&EXT4_I(inode1)->i_data_sem));
+ BUG_ON(!rwsem_is_locked(&EXT4_I(inode2)->i_data_sem));
+ BUG_ON(!mutex_is_locked(&inode1->i_mutex));
+ BUG_ON(!mutex_is_locked(&inode1->i_mutex));
+
+ *erp = ext4_es_remove_extent(inode1, lblk1, count);
+ if (unlikely(*erp))
+ return 0;
+ *erp = ext4_es_remove_extent(inode2, lblk2, count);
+ if (unlikely(*erp))
+ return 0;
+
+ while (count) {
+ struct ext4_extent *ex1, *ex2, tmp_ex;
+ ext4_lblk_t e1_blk, e2_blk;
+ int e1_len, e2_len, len;
+ int split = 0;
+
+ path1 = ext4_find_extent(inode1, lblk1, NULL, EXT4_EX_NOCACHE);
+ if (unlikely(IS_ERR(path1))) {
+ *erp = PTR_ERR(path1);
+ path1 = NULL;
+ finish:
+ count = 0;
+ goto repeat;
+ }
+ path2 = ext4_find_extent(inode2, lblk2, NULL, EXT4_EX_NOCACHE);
+ if (unlikely(IS_ERR(path2))) {
+ *erp = PTR_ERR(path2);
+ path2 = NULL;
+ goto finish;
+ }
+ ex1 = path1[path1->p_depth].p_ext;
+ ex2 = path2[path2->p_depth].p_ext;
+ /* Do we have somthing to swap ? */
+ if (unlikely(!ex2 || !ex1))
+ goto finish;
+
+ e1_blk = le32_to_cpu(ex1->ee_block);
+ e2_blk = le32_to_cpu(ex2->ee_block);
+ e1_len = ext4_ext_get_actual_len(ex1);
+ e2_len = ext4_ext_get_actual_len(ex2);
+
+ /* Hole handling */
+ if (!in_range(lblk1, e1_blk, e1_len) ||
+ !in_range(lblk2, e2_blk, e2_len)) {
+ ext4_lblk_t next1, next2;
+
+ /* if hole after extent, then go to next extent */
+ next1 = ext4_ext_next_allocated_block(path1);
+ next2 = ext4_ext_next_allocated_block(path2);
+ /* If hole before extent, then shift to that extent */
+ if (e1_blk > lblk1)
+ next1 = e1_blk;
+ if (e2_blk > lblk2)
+ next2 = e1_blk;
+ /* Do we have something to swap */
+ if (next1 == EXT_MAX_BLOCKS || next2 == EXT_MAX_BLOCKS)
+ goto finish;
+ /* Move to the rightest boundary */
+ len = next1 - lblk1;
+ if (len < next2 - lblk2)
+ len = next2 - lblk2;
+ if (len > count)
+ len = count;
+ lblk1 += len;
+ lblk2 += len;
+ count -= len;
+ goto repeat;
+ }
+
+ /* Prepare left boundary */
+ if (e1_blk < lblk1) {
+ split = 1;
+ *erp = ext4_force_split_extent_at(handle, inode1,
+ &path1, lblk1, 0);
+ if (unlikely(*erp))
+ goto finish;
+ }
+ if (e2_blk < lblk2) {
+ split = 1;
+ *erp = ext4_force_split_extent_at(handle, inode2,
+ &path2, lblk2, 0);
+ if (unlikely(*erp))
+ goto finish;
+ }
+ /* ext4_split_extent_at() may result in leaf extent split,
+ * path must to be revalidated. */
+ if (split)
+ goto repeat;
+
+ /* Prepare right boundary */
+ len = count;
+ if (len > e1_blk + e1_len - lblk1)
+ len = e1_blk + e1_len - lblk1;
+ if (len > e2_blk + e2_len - lblk2)
+ len = e2_blk + e2_len - lblk2;
+
+ if (len != e1_len) {
+ split = 1;
+ *erp = ext4_force_split_extent_at(handle, inode1,
+ &path1, lblk1 + len, 0);
+ if (unlikely(*erp))
+ goto finish;
+ }
+ if (len != e2_len) {
+ split = 1;
+ *erp = ext4_force_split_extent_at(handle, inode2,
+ &path2, lblk2 + len, 0);
+ if (*erp)
+ goto finish;
+ }
+ /* ext4_split_extent_at() may result in leaf extent split,
+ * path must to be revalidated. */
+ if (split)
+ goto repeat;
+
+ BUG_ON(e2_len != e1_len);
+ *erp = ext4_ext_get_access(handle, inode1, path1 + path1->p_depth);
+ if (unlikely(*erp))
+ goto finish;
+ *erp = ext4_ext_get_access(handle, inode2, path2 + path2->p_depth);
+ if (unlikely(*erp))
+ goto finish;
+
+ /* Both extents are fully inside boundaries. Swap it now */
+ tmp_ex = *ex1;
+ ext4_ext_store_pblock(ex1, ext4_ext_pblock(ex2));
+ ext4_ext_store_pblock(ex2, ext4_ext_pblock(&tmp_ex));
+ ex1->ee_len = cpu_to_le16(e2_len);
+ ex2->ee_len = cpu_to_le16(e1_len);
+ if (unwritten)
+ ext4_ext_mark_unwritten(ex2);
+ if (ext4_ext_is_unwritten(&tmp_ex))
+ ext4_ext_mark_unwritten(ex1);
+
+ ext4_ext_try_to_merge(handle, inode2, path2, ex2);
+ ext4_ext_try_to_merge(handle, inode1, path1, ex1);
+ *erp = ext4_ext_dirty(handle, inode2, path2 +
+ path2->p_depth);
+ if (unlikely(*erp))
+ goto finish;
+ *erp = ext4_ext_dirty(handle, inode1, path1 +
+ path1->p_depth);
+ /*
+ * Looks scarry ah..? second inode already points to new blocks,
+ * and it was successfully dirtied. But luckily error may happen
+ * only due to journal error, so full transaction will be
+ * aborted anyway.
+ */
+ if (unlikely(*erp))
+ goto finish;
+ lblk1 += len;
+ lblk2 += len;
+ replaced_count += len;
+ count -= len;
+
+ repeat:
+ ext4_ext_drop_refs(path1);
+ kfree(path1);
+ ext4_ext_drop_refs(path2);
+ kfree(path2);
+ path1 = path2 = NULL;
+ }
+ return replaced_count;
+}
*/
#include <linux/rbtree.h>
#include <linux/list_sort.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
#include "ext4.h"
#include "extents_status.h"
*/
if (!ext4_es_is_delayed(es)) {
EXT4_I(inode)->i_es_lru_nr++;
- percpu_counter_inc(&EXT4_SB(inode->i_sb)->s_extent_cache_cnt);
+ percpu_counter_inc(&EXT4_SB(inode->i_sb)->
+ s_es_stats.es_stats_lru_cnt);
}
+ EXT4_I(inode)->i_es_all_nr++;
+ percpu_counter_inc(&EXT4_SB(inode->i_sb)->s_es_stats.es_stats_all_cnt);
+
return es;
}
static void ext4_es_free_extent(struct inode *inode, struct extent_status *es)
{
+ EXT4_I(inode)->i_es_all_nr--;
+ percpu_counter_dec(&EXT4_SB(inode->i_sb)->s_es_stats.es_stats_all_cnt);
+
/* Decrease the lru counter when this es is not delayed */
if (!ext4_es_is_delayed(es)) {
BUG_ON(EXT4_I(inode)->i_es_lru_nr == 0);
EXT4_I(inode)->i_es_lru_nr--;
- percpu_counter_dec(&EXT4_SB(inode->i_sb)->s_extent_cache_cnt);
+ percpu_counter_dec(&EXT4_SB(inode->i_sb)->
+ s_es_stats.es_stats_lru_cnt);
}
kmem_cache_free(ext4_es_cachep, es);
unsigned short ee_len;
int depth, ee_status, es_status;
- path = ext4_ext_find_extent(inode, es->es_lblk, NULL, EXT4_EX_NOCACHE);
+ path = ext4_find_extent(inode, es->es_lblk, NULL, EXT4_EX_NOCACHE);
if (IS_ERR(path))
return;
}
}
out:
- if (path) {
- ext4_ext_drop_refs(path);
- kfree(path);
- }
+ ext4_ext_drop_refs(path);
+ kfree(path);
}
static void ext4_es_insert_extent_ind_check(struct inode *inode,
struct extent_status *es)
{
struct ext4_es_tree *tree;
+ struct ext4_es_stats *stats;
struct extent_status *es1 = NULL;
struct rb_node *node;
int found = 0;
}
out:
+ stats = &EXT4_SB(inode->i_sb)->s_es_stats;
if (found) {
BUG_ON(!es1);
es->es_lblk = es1->es_lblk;
es->es_len = es1->es_len;
es->es_pblk = es1->es_pblk;
+ stats->es_stats_cache_hits++;
+ } else {
+ stats->es_stats_cache_misses++;
}
read_unlock(&EXT4_I(inode)->i_es_lock);
struct ext4_inode_info *locked_ei)
{
struct ext4_inode_info *ei;
+ struct ext4_es_stats *es_stats;
struct list_head *cur, *tmp;
LIST_HEAD(skipped);
+ ktime_t start_time;
+ u64 scan_time;
int nr_shrunk = 0;
int retried = 0, skip_precached = 1, nr_skipped = 0;
+ es_stats = &sbi->s_es_stats;
+ start_time = ktime_get();
spin_lock(&sbi->s_es_lru_lock);
retry:
* If we have already reclaimed all extents from extent
* status tree, just stop the loop immediately.
*/
- if (percpu_counter_read_positive(&sbi->s_extent_cache_cnt) == 0)
+ if (percpu_counter_read_positive(
+ &es_stats->es_stats_lru_cnt) == 0)
break;
ei = list_entry(cur, struct ext4_inode_info, i_es_lru);
* time. Normally we try hard to avoid shrinking
* precached inodes, but we will as a last resort.
*/
- if ((sbi->s_es_last_sorted < ei->i_touch_when) ||
+ if ((es_stats->es_stats_last_sorted < ei->i_touch_when) ||
(skip_precached && ext4_test_inode_state(&ei->vfs_inode,
EXT4_STATE_EXT_PRECACHED))) {
nr_skipped++;
if ((nr_shrunk == 0) && nr_skipped && !retried) {
retried++;
list_sort(NULL, &sbi->s_es_lru, ext4_inode_touch_time_cmp);
- sbi->s_es_last_sorted = jiffies;
+ es_stats->es_stats_last_sorted = jiffies;
ei = list_first_entry(&sbi->s_es_lru, struct ext4_inode_info,
i_es_lru);
/*
if (locked_ei && nr_shrunk == 0)
nr_shrunk = __es_try_to_reclaim_extents(locked_ei, nr_to_scan);
+ scan_time = ktime_to_ns(ktime_sub(ktime_get(), start_time));
+ if (likely(es_stats->es_stats_scan_time))
+ es_stats->es_stats_scan_time = (scan_time +
+ es_stats->es_stats_scan_time*3) / 4;
+ else
+ es_stats->es_stats_scan_time = scan_time;
+ if (scan_time > es_stats->es_stats_max_scan_time)
+ es_stats->es_stats_max_scan_time = scan_time;
+ if (likely(es_stats->es_stats_shrunk))
+ es_stats->es_stats_shrunk = (nr_shrunk +
+ es_stats->es_stats_shrunk*3) / 4;
+ else
+ es_stats->es_stats_shrunk = nr_shrunk;
+
+ trace_ext4_es_shrink(sbi->s_sb, nr_shrunk, scan_time, skip_precached,
+ nr_skipped, retried);
return nr_shrunk;
}
struct ext4_sb_info *sbi;
sbi = container_of(shrink, struct ext4_sb_info, s_es_shrinker);
- nr = percpu_counter_read_positive(&sbi->s_extent_cache_cnt);
- trace_ext4_es_shrink_enter(sbi->s_sb, sc->nr_to_scan, nr);
+ nr = percpu_counter_read_positive(&sbi->s_es_stats.es_stats_lru_cnt);
+ trace_ext4_es_shrink_count(sbi->s_sb, sc->nr_to_scan, nr);
return nr;
}
int nr_to_scan = sc->nr_to_scan;
int ret, nr_shrunk;
- ret = percpu_counter_read_positive(&sbi->s_extent_cache_cnt);
- trace_ext4_es_shrink_enter(sbi->s_sb, nr_to_scan, ret);
+ ret = percpu_counter_read_positive(&sbi->s_es_stats.es_stats_lru_cnt);
+ trace_ext4_es_shrink_scan_enter(sbi->s_sb, nr_to_scan, ret);
if (!nr_to_scan)
return ret;
nr_shrunk = __ext4_es_shrink(sbi, nr_to_scan, NULL);
- trace_ext4_es_shrink_exit(sbi->s_sb, nr_shrunk, ret);
+ trace_ext4_es_shrink_scan_exit(sbi->s_sb, nr_shrunk, ret);
return nr_shrunk;
}
-void ext4_es_register_shrinker(struct ext4_sb_info *sbi)
+static void *ext4_es_seq_shrinker_info_start(struct seq_file *seq, loff_t *pos)
{
+ return *pos ? NULL : SEQ_START_TOKEN;
+}
+
+static void *
+ext4_es_seq_shrinker_info_next(struct seq_file *seq, void *v, loff_t *pos)
+{
+ return NULL;
+}
+
+static int ext4_es_seq_shrinker_info_show(struct seq_file *seq, void *v)
+{
+ struct ext4_sb_info *sbi = seq->private;
+ struct ext4_es_stats *es_stats = &sbi->s_es_stats;
+ struct ext4_inode_info *ei, *max = NULL;
+ unsigned int inode_cnt = 0;
+
+ if (v != SEQ_START_TOKEN)
+ return 0;
+
+ /* here we just find an inode that has the max nr. of objects */
+ spin_lock(&sbi->s_es_lru_lock);
+ list_for_each_entry(ei, &sbi->s_es_lru, i_es_lru) {
+ inode_cnt++;
+ if (max && max->i_es_all_nr < ei->i_es_all_nr)
+ max = ei;
+ else if (!max)
+ max = ei;
+ }
+ spin_unlock(&sbi->s_es_lru_lock);
+
+ seq_printf(seq, "stats:\n %lld objects\n %lld reclaimable objects\n",
+ percpu_counter_sum_positive(&es_stats->es_stats_all_cnt),
+ percpu_counter_sum_positive(&es_stats->es_stats_lru_cnt));
+ seq_printf(seq, " %lu/%lu cache hits/misses\n",
+ es_stats->es_stats_cache_hits,
+ es_stats->es_stats_cache_misses);
+ if (es_stats->es_stats_last_sorted != 0)
+ seq_printf(seq, " %u ms last sorted interval\n",
+ jiffies_to_msecs(jiffies -
+ es_stats->es_stats_last_sorted));
+ if (inode_cnt)
+ seq_printf(seq, " %d inodes on lru list\n", inode_cnt);
+
+ seq_printf(seq, "average:\n %llu us scan time\n",
+ div_u64(es_stats->es_stats_scan_time, 1000));
+ seq_printf(seq, " %lu shrunk objects\n", es_stats->es_stats_shrunk);
+ if (inode_cnt)
+ seq_printf(seq,
+ "maximum:\n %lu inode (%u objects, %u reclaimable)\n"
+ " %llu us max scan time\n",
+ max->vfs_inode.i_ino, max->i_es_all_nr, max->i_es_lru_nr,
+ div_u64(es_stats->es_stats_max_scan_time, 1000));
+
+ return 0;
+}
+
+static void ext4_es_seq_shrinker_info_stop(struct seq_file *seq, void *v)
+{
+}
+
+static const struct seq_operations ext4_es_seq_shrinker_info_ops = {
+ .start = ext4_es_seq_shrinker_info_start,
+ .next = ext4_es_seq_shrinker_info_next,
+ .stop = ext4_es_seq_shrinker_info_stop,
+ .show = ext4_es_seq_shrinker_info_show,
+};
+
+static int
+ext4_es_seq_shrinker_info_open(struct inode *inode, struct file *file)
+{
+ int ret;
+
+ ret = seq_open(file, &ext4_es_seq_shrinker_info_ops);
+ if (!ret) {
+ struct seq_file *m = file->private_data;
+ m->private = PDE_DATA(inode);
+ }
+
+ return ret;
+}
+
+static int
+ext4_es_seq_shrinker_info_release(struct inode *inode, struct file *file)
+{
+ return seq_release(inode, file);
+}
+
+static const struct file_operations ext4_es_seq_shrinker_info_fops = {
+ .owner = THIS_MODULE,
+ .open = ext4_es_seq_shrinker_info_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = ext4_es_seq_shrinker_info_release,
+};
+
+int ext4_es_register_shrinker(struct ext4_sb_info *sbi)
+{
+ int err;
+
INIT_LIST_HEAD(&sbi->s_es_lru);
spin_lock_init(&sbi->s_es_lru_lock);
- sbi->s_es_last_sorted = 0;
+ sbi->s_es_stats.es_stats_last_sorted = 0;
+ sbi->s_es_stats.es_stats_shrunk = 0;
+ sbi->s_es_stats.es_stats_cache_hits = 0;
+ sbi->s_es_stats.es_stats_cache_misses = 0;
+ sbi->s_es_stats.es_stats_scan_time = 0;
+ sbi->s_es_stats.es_stats_max_scan_time = 0;
+ err = percpu_counter_init(&sbi->s_es_stats.es_stats_all_cnt, 0, GFP_KERNEL);
+ if (err)
+ return err;
+ err = percpu_counter_init(&sbi->s_es_stats.es_stats_lru_cnt, 0, GFP_KERNEL);
+ if (err)
+ goto err1;
+
sbi->s_es_shrinker.scan_objects = ext4_es_scan;
sbi->s_es_shrinker.count_objects = ext4_es_count;
sbi->s_es_shrinker.seeks = DEFAULT_SEEKS;
- register_shrinker(&sbi->s_es_shrinker);
+ err = register_shrinker(&sbi->s_es_shrinker);
+ if (err)
+ goto err2;
+
+ if (sbi->s_proc)
+ proc_create_data("es_shrinker_info", S_IRUGO, sbi->s_proc,
+ &ext4_es_seq_shrinker_info_fops, sbi);
+
+ return 0;
+
+err2:
+ percpu_counter_destroy(&sbi->s_es_stats.es_stats_lru_cnt);
+err1:
+ percpu_counter_destroy(&sbi->s_es_stats.es_stats_all_cnt);
+ return err;
}
void ext4_es_unregister_shrinker(struct ext4_sb_info *sbi)
{
+ if (sbi->s_proc)
+ remove_proc_entry("es_shrinker_info", sbi->s_proc);
+ percpu_counter_destroy(&sbi->s_es_stats.es_stats_all_cnt);
+ percpu_counter_destroy(&sbi->s_es_stats.es_stats_lru_cnt);
unregister_shrinker(&sbi->s_es_shrinker);
}
struct extent_status *cache_es; /* recently accessed extent */
};
+struct ext4_es_stats {
+ unsigned long es_stats_last_sorted;
+ unsigned long es_stats_shrunk;
+ unsigned long es_stats_cache_hits;
+ unsigned long es_stats_cache_misses;
+ u64 es_stats_scan_time;
+ u64 es_stats_max_scan_time;
+ struct percpu_counter es_stats_all_cnt;
+ struct percpu_counter es_stats_lru_cnt;
+};
+
extern int __init ext4_init_es(void);
extern void ext4_exit_es(void);
extern void ext4_es_init_tree(struct ext4_es_tree *tree);
(pb & ~ES_MASK));
}
-extern void ext4_es_register_shrinker(struct ext4_sb_info *sbi);
+extern int ext4_es_register_shrinker(struct ext4_sb_info *sbi);
extern void ext4_es_unregister_shrinker(struct ext4_sb_info *sbi);
extern void ext4_es_lru_add(struct inode *inode);
extern void ext4_es_lru_del(struct inode *inode);
iov_iter_truncate(from, sbi->s_bitmap_maxbytes - pos);
}
+ iocb->private = &overwrite;
if (o_direct) {
blk_start_plug(&plug);
- iocb->private = &overwrite;
/* check whether we do a DIO overwrite or not */
if (ext4_should_dioread_nolock(inode) && !aio_mutex &&
struct buffer_head *block_bitmap_bh;
block_bitmap_bh = ext4_read_block_bitmap(sb, group);
+ if (!block_bitmap_bh) {
+ err = -EIO;
+ goto out;
+ }
BUFFER_TRACE(block_bitmap_bh, "get block bitmap access");
err = ext4_journal_get_write_access(handle, block_bitmap_bh);
if (err) {
spin_unlock(&sbi->s_next_gen_lock);
/* Precompute checksum seed for inode metadata */
- if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM)) {
+ if (ext4_has_metadata_csum(sb)) {
__u32 csum;
__le32 inum = cpu_to_le32(inode->i_ino);
__le32 gen = cpu_to_le32(inode->i_generation);
* ext4_alloc_block() (normally -ENOSPC). Otherwise we set the chain
* as described above and return 0.
*/
-static int ext4_alloc_branch(handle_t *handle, struct inode *inode,
- ext4_lblk_t iblock, int indirect_blks,
- int *blks, ext4_fsblk_t goal,
- ext4_lblk_t *offsets, Indirect *branch)
+static int ext4_alloc_branch(handle_t *handle,
+ struct ext4_allocation_request *ar,
+ int indirect_blks, ext4_lblk_t *offsets,
+ Indirect *branch)
{
- struct ext4_allocation_request ar;
struct buffer_head * bh;
ext4_fsblk_t b, new_blocks[4];
__le32 *p;
int i, j, err, len = 1;
- /*
- * Set up for the direct block allocation
- */
- memset(&ar, 0, sizeof(ar));
- ar.inode = inode;
- ar.len = *blks;
- ar.logical = iblock;
- if (S_ISREG(inode->i_mode))
- ar.flags = EXT4_MB_HINT_DATA;
-
for (i = 0; i <= indirect_blks; i++) {
if (i == indirect_blks) {
- ar.goal = goal;
- new_blocks[i] = ext4_mb_new_blocks(handle, &ar, &err);
+ new_blocks[i] = ext4_mb_new_blocks(handle, ar, &err);
} else
- goal = new_blocks[i] = ext4_new_meta_blocks(handle, inode,
- goal, 0, NULL, &err);
+ ar->goal = new_blocks[i] = ext4_new_meta_blocks(handle,
+ ar->inode, ar->goal,
+ ar->flags & EXT4_MB_DELALLOC_RESERVED,
+ NULL, &err);
if (err) {
i--;
goto failed;
if (i == 0)
continue;
- bh = branch[i].bh = sb_getblk(inode->i_sb, new_blocks[i-1]);
+ bh = branch[i].bh = sb_getblk(ar->inode->i_sb, new_blocks[i-1]);
if (unlikely(!bh)) {
err = -ENOMEM;
goto failed;
b = new_blocks[i];
if (i == indirect_blks)
- len = ar.len;
+ len = ar->len;
for (j = 0; j < len; j++)
*p++ = cpu_to_le32(b++);
unlock_buffer(bh);
BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata");
- err = ext4_handle_dirty_metadata(handle, inode, bh);
+ err = ext4_handle_dirty_metadata(handle, ar->inode, bh);
if (err)
goto failed;
}
- *blks = ar.len;
return 0;
failed:
for (; i >= 0; i--) {
* existing before ext4_alloc_branch() was called.
*/
if (i > 0 && i != indirect_blks && branch[i].bh)
- ext4_forget(handle, 1, inode, branch[i].bh,
+ ext4_forget(handle, 1, ar->inode, branch[i].bh,
branch[i].bh->b_blocknr);
- ext4_free_blocks(handle, inode, NULL, new_blocks[i],
- (i == indirect_blks) ? ar.len : 1, 0);
+ ext4_free_blocks(handle, ar->inode, NULL, new_blocks[i],
+ (i == indirect_blks) ? ar->len : 1, 0);
}
return err;
}
* inode (->i_blocks, etc.). In case of success we end up with the full
* chain to new block and return 0.
*/
-static int ext4_splice_branch(handle_t *handle, struct inode *inode,
- ext4_lblk_t block, Indirect *where, int num,
- int blks)
+static int ext4_splice_branch(handle_t *handle,
+ struct ext4_allocation_request *ar,
+ Indirect *where, int num)
{
int i;
int err = 0;
* Update the host buffer_head or inode to point to more just allocated
* direct blocks blocks
*/
- if (num == 0 && blks > 1) {
+ if (num == 0 && ar->len > 1) {
current_block = le32_to_cpu(where->key) + 1;
- for (i = 1; i < blks; i++)
+ for (i = 1; i < ar->len; i++)
*(where->p + i) = cpu_to_le32(current_block++);
}
*/
jbd_debug(5, "splicing indirect only\n");
BUFFER_TRACE(where->bh, "call ext4_handle_dirty_metadata");
- err = ext4_handle_dirty_metadata(handle, inode, where->bh);
+ err = ext4_handle_dirty_metadata(handle, ar->inode, where->bh);
if (err)
goto err_out;
} else {
/*
* OK, we spliced it into the inode itself on a direct block.
*/
- ext4_mark_inode_dirty(handle, inode);
+ ext4_mark_inode_dirty(handle, ar->inode);
jbd_debug(5, "splicing direct\n");
}
return err;
* need to revoke the block, which is why we don't
* need to set EXT4_FREE_BLOCKS_METADATA.
*/
- ext4_free_blocks(handle, inode, where[i].bh, 0, 1,
+ ext4_free_blocks(handle, ar->inode, where[i].bh, 0, 1,
EXT4_FREE_BLOCKS_FORGET);
}
- ext4_free_blocks(handle, inode, NULL, le32_to_cpu(where[num].key),
- blks, 0);
+ ext4_free_blocks(handle, ar->inode, NULL, le32_to_cpu(where[num].key),
+ ar->len, 0);
return err;
}
struct ext4_map_blocks *map,
int flags)
{
+ struct ext4_allocation_request ar;
int err = -EIO;
ext4_lblk_t offsets[4];
Indirect chain[4];
Indirect *partial;
- ext4_fsblk_t goal;
int indirect_blks;
int blocks_to_boundary = 0;
int depth;
return -ENOSPC;
}
- goal = ext4_find_goal(inode, map->m_lblk, partial);
+ /* Set up for the direct block allocation */
+ memset(&ar, 0, sizeof(ar));
+ ar.inode = inode;
+ ar.logical = map->m_lblk;
+ if (S_ISREG(inode->i_mode))
+ ar.flags = EXT4_MB_HINT_DATA;
+ if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
+ ar.flags |= EXT4_MB_DELALLOC_RESERVED;
+
+ ar.goal = ext4_find_goal(inode, map->m_lblk, partial);
/* the number of blocks need to allocate for [d,t]indirect blocks */
indirect_blks = (chain + depth) - partial - 1;
* Next look up the indirect map to count the totoal number of
* direct blocks to allocate for this branch.
*/
- count = ext4_blks_to_allocate(partial, indirect_blks,
- map->m_len, blocks_to_boundary);
+ ar.len = ext4_blks_to_allocate(partial, indirect_blks,
+ map->m_len, blocks_to_boundary);
+
/*
* Block out ext4_truncate while we alter the tree
*/
- err = ext4_alloc_branch(handle, inode, map->m_lblk, indirect_blks,
- &count, goal,
+ err = ext4_alloc_branch(handle, &ar, indirect_blks,
offsets + (partial - chain), partial);
/*
* may need to return -EAGAIN upwards in the worst case. --sct
*/
if (!err)
- err = ext4_splice_branch(handle, inode, map->m_lblk,
- partial, indirect_blks, count);
+ err = ext4_splice_branch(handle, &ar, partial, indirect_blks);
if (err)
goto cleanup;
map->m_flags |= EXT4_MAP_NEW;
ext4_update_inode_fsync_trans(handle, inode, 1);
+ count = ar.len;
got_it:
map->m_flags |= EXT4_MAP_MAPPED;
map->m_pblk = le32_to_cpu(chain[depth-1].key);
if (ret) {
unlock_page(page);
page_cache_release(page);
+ page = NULL;
ext4_orphan_add(handle, inode);
up_write(&EXT4_I(inode)->xattr_sem);
sem_held = 0;
if (ret == -ENOSPC && ext4_should_retry_alloc(inode->i_sb, &retries))
goto retry;
- block_commit_write(page, from, to);
+ if (page)
+ block_commit_write(page, from, to);
out:
if (page) {
unlock_page(page);
memcpy((void *)de, buf + EXT4_INLINE_DOTDOT_SIZE,
inline_size - EXT4_INLINE_DOTDOT_SIZE);
- if (EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ if (ext4_has_metadata_csum(inode->i_sb))
csum_size = sizeof(struct ext4_dir_entry_tail);
inode->i_size = inode->i_sb->s_blocksize;
if (EXT4_SB(inode->i_sb)->s_es->s_creator_os !=
cpu_to_le32(EXT4_OS_LINUX) ||
- !EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ !ext4_has_metadata_csum(inode->i_sb))
return 1;
provided = le16_to_cpu(raw->i_checksum_lo);
if (EXT4_SB(inode->i_sb)->s_es->s_creator_os !=
cpu_to_le32(EXT4_OS_LINUX) ||
- !EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ !ext4_has_metadata_csum(inode->i_sb))
return;
csum = ext4_inode_csum(inode, raw, ei);
goto no_delete;
}
- if (!is_bad_inode(inode))
- dquot_initialize(inode);
+ if (is_bad_inode(inode))
+ goto no_delete;
+ dquot_initialize(inode);
if (ext4_should_order_data(inode))
ext4_begin_ordered_truncate(inode, 0);
truncate_inode_pages_final(&inode->i_data);
WARN_ON(atomic_read(&EXT4_I(inode)->i_ioend_count));
- if (is_bad_inode(inode))
- goto no_delete;
/*
* Protect us against freezing - iput() caller didn't have to have any
/*
* New blocks allocate and/or writing to unwritten extent
* will possibly result in updating i_data, so we take
- * the write lock of i_data_sem, and call get_blocks()
+ * the write lock of i_data_sem, and call get_block()
* with create == 1 flag.
*/
down_write(&EXT4_I(inode)->i_data_sem);
- /*
- * if the caller is from delayed allocation writeout path
- * we have already reserved fs blocks for allocation
- * let the underlying get_block() function know to
- * avoid double accounting
- */
- if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
- ext4_set_inode_state(inode, EXT4_STATE_DELALLOC_RESERVED);
/*
* We need to check for EXT4 here because migrate
* could have changed the inode type in between
(flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE))
ext4_da_update_reserve_space(inode, retval, 1);
}
- if (flags & EXT4_GET_BLOCKS_DELALLOC_RESERVE)
- ext4_clear_inode_state(inode, EXT4_STATE_DELALLOC_RESERVED);
if (retval > 0) {
unsigned int status;
* `handle' can be NULL if create is zero
*/
struct buffer_head *ext4_getblk(handle_t *handle, struct inode *inode,
- ext4_lblk_t block, int create, int *errp)
+ ext4_lblk_t block, int create)
{
struct ext4_map_blocks map;
struct buffer_head *bh;
- int fatal = 0, err;
+ int err;
J_ASSERT(handle != NULL || create == 0);
err = ext4_map_blocks(handle, inode, &map,
create ? EXT4_GET_BLOCKS_CREATE : 0);
- /* ensure we send some value back into *errp */
- *errp = 0;
-
- if (create && err == 0)
- err = -ENOSPC; /* should never happen */
+ if (err == 0)
+ return create ? ERR_PTR(-ENOSPC) : NULL;
if (err < 0)
- *errp = err;
- if (err <= 0)
- return NULL;
+ return ERR_PTR(err);
bh = sb_getblk(inode->i_sb, map.m_pblk);
- if (unlikely(!bh)) {
- *errp = -ENOMEM;
- return NULL;
- }
+ if (unlikely(!bh))
+ return ERR_PTR(-ENOMEM);
if (map.m_flags & EXT4_MAP_NEW) {
J_ASSERT(create != 0);
J_ASSERT(handle != NULL);
*/
lock_buffer(bh);
BUFFER_TRACE(bh, "call get_create_access");
- fatal = ext4_journal_get_create_access(handle, bh);
- if (!fatal && !buffer_uptodate(bh)) {
+ err = ext4_journal_get_create_access(handle, bh);
+ if (unlikely(err)) {
+ unlock_buffer(bh);
+ goto errout;
+ }
+ if (!buffer_uptodate(bh)) {
memset(bh->b_data, 0, inode->i_sb->s_blocksize);
set_buffer_uptodate(bh);
}
unlock_buffer(bh);
BUFFER_TRACE(bh, "call ext4_handle_dirty_metadata");
err = ext4_handle_dirty_metadata(handle, inode, bh);
- if (!fatal)
- fatal = err;
- } else {
+ if (unlikely(err))
+ goto errout;
+ } else
BUFFER_TRACE(bh, "not a new buffer");
- }
- if (fatal) {
- *errp = fatal;
- brelse(bh);
- bh = NULL;
- }
return bh;
+errout:
+ brelse(bh);
+ return ERR_PTR(err);
}
struct buffer_head *ext4_bread(handle_t *handle, struct inode *inode,
- ext4_lblk_t block, int create, int *err)
+ ext4_lblk_t block, int create)
{
struct buffer_head *bh;
- bh = ext4_getblk(handle, inode, block, create, err);
- if (!bh)
+ bh = ext4_getblk(handle, inode, block, create);
+ if (IS_ERR(bh))
return bh;
- if (buffer_uptodate(bh))
+ if (!bh || buffer_uptodate(bh))
return bh;
ll_rw_block(READ | REQ_META | REQ_PRIO, 1, &bh);
wait_on_buffer(bh);
if (buffer_uptodate(bh))
return bh;
put_bh(bh);
- *err = -EIO;
- return NULL;
+ return ERR_PTR(-EIO);
}
int ext4_walk_page_buffers(handle_t *handle,
}
/*
- * This is a special get_blocks_t callback which is used by
+ * This is a special get_block_t callback which is used by
* ext4_da_write_begin(). It will either return mapped block or
* reserve space for a single block.
*
* in data loss. So use reserved blocks to allocate metadata if
* possible.
*
- * We pass in the magic EXT4_GET_BLOCKS_DELALLOC_RESERVE if the blocks
- * in question are delalloc blocks. This affects functions in many
- * different parts of the allocation call path. This flag exists
- * primarily because we don't want to change *many* call functions, so
- * ext4_map_blocks() will set the EXT4_STATE_DELALLOC_RESERVED flag
- * once the inode's allocation semaphore is taken.
+ * We pass in the magic EXT4_GET_BLOCKS_DELALLOC_RESERVE if
+ * the blocks in question are delalloc blocks. This indicates
+ * that the blocks and quotas has already been checked when
+ * the data was copied into the page cache.
*/
get_blocks_flags = EXT4_GET_BLOCKS_CREATE |
EXT4_GET_BLOCKS_METADATA_NOFAIL;
return 0;
}
+/* We always reserve for an inode update; the superblock could be there too */
+static int ext4_da_write_credits(struct inode *inode, loff_t pos, unsigned len)
+{
+ if (likely(EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
+ EXT4_FEATURE_RO_COMPAT_LARGE_FILE)))
+ return 1;
+
+ if (pos + len <= 0x7fffffffULL)
+ return 1;
+
+ /* We might need to update the superblock to set LARGE_FILE */
+ return 2;
+}
+
static int ext4_da_write_begin(struct file *file, struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
struct page **pagep, void **fsdata)
* of file which has an already mapped buffer.
*/
retry_journal:
- handle = ext4_journal_start(inode, EXT4_HT_WRITE_PAGE, 1);
+ handle = ext4_journal_start(inode, EXT4_HT_WRITE_PAGE,
+ ext4_da_write_credits(inode, pos, len));
if (IS_ERR(handle)) {
page_cache_release(page);
return PTR_ERR(handle);
if (copied && new_i_size > EXT4_I(inode)->i_disksize) {
if (ext4_has_inline_data(inode) ||
ext4_da_should_update_i_disksize(page, end)) {
- down_write(&EXT4_I(inode)->i_data_sem);
- if (new_i_size > EXT4_I(inode)->i_disksize)
- EXT4_I(inode)->i_disksize = new_i_size;
- up_write(&EXT4_I(inode)->i_data_sem);
+ ext4_update_i_disksize(inode, new_i_size);
/* We need to mark inode dirty even if
* new_i_size is less that inode->i_size
* bu greater than i_disksize.(hint delalloc)
ei->i_extra_isize = 0;
/* Precompute checksum seed for inode metadata */
- if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM)) {
+ if (ext4_has_metadata_csum(sb)) {
struct ext4_sb_info *sbi = EXT4_SB(inode->i_sb);
__u32 csum;
__le32 inum = cpu_to_le32(inode->i_ino);
return ERR_PTR(ret);
}
+struct inode *ext4_iget_normal(struct super_block *sb, unsigned long ino)
+{
+ if (ino < EXT4_FIRST_INO(sb) && ino != EXT4_ROOT_INO)
+ return ERR_PTR(-EIO);
+ return ext4_iget(sb, ino);
+}
+
static int ext4_inode_blocks_set(handle_t *handle,
struct ext4_inode *raw_inode,
struct ext4_inode_info *ei)
EXT4_INODE_SET_XTIME(i_atime, inode, raw_inode);
EXT4_EINODE_SET_XTIME(i_crtime, ei, raw_inode);
- if (ext4_inode_blocks_set(handle, raw_inode, ei)) {
+ err = ext4_inode_blocks_set(handle, raw_inode, ei);
+ if (err) {
spin_unlock(&ei->i_raw_lock);
goto out_brelse;
}
ext4_orphan_del(NULL, inode);
goto err_out;
}
- } else
+ } else {
+ loff_t oldsize = inode->i_size;
+
i_size_write(inode, attr->ia_size);
+ pagecache_isize_extended(inode, oldsize, inode->i_size);
+ }
/*
* Blocks are going to be removed from the inode. Wait
if (val)
ext4_set_inode_flag(inode, EXT4_INODE_JOURNAL_DATA);
else {
- jbd2_journal_flush(journal);
+ err = jbd2_journal_flush(journal);
+ if (err < 0) {
+ jbd2_journal_unlock_updates(journal);
+ ext4_inode_resume_unlocked_dio(inode);
+ return err;
+ }
ext4_clear_inode_flag(inode, EXT4_INODE_JOURNAL_DATA);
}
ext4_set_aops(inode);
if (!inode_owner_or_capable(inode))
return -EPERM;
- if (EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM)) {
+ if (ext4_has_metadata_csum(inode->i_sb)) {
ext4_warning(sb, "Setting inode version is not "
"supported with metadata_csum enabled.");
return -ENOTTY;
}
case EXT4_IOC_SWAP_BOOT:
+ {
+ int err;
if (!(filp->f_mode & FMODE_WRITE))
return -EBADF;
- return swap_inode_boot_loader(sb, inode);
+ err = mnt_want_write_file(filp);
+ if (err)
+ return err;
+ err = swap_inode_boot_loader(sb, inode);
+ mnt_drop_write_file(filp);
+ return err;
+ }
case EXT4_IOC_RESIZE_FS: {
ext4_fsblk_t n_blocks_count;
"start %lu, size %lu, fe_logical %lu",
(unsigned long) start, (unsigned long) size,
(unsigned long) ac->ac_o_ex.fe_logical);
+ BUG();
}
- BUG_ON(start + size <= ac->ac_o_ex.fe_logical &&
- start > ac->ac_o_ex.fe_logical);
BUG_ON(size <= 0 || size > EXT4_BLOCKS_PER_GROUP(ac->ac_sb));
/* now prepare goal request */
if (IS_NOQUOTA(ar->inode))
ar->flags |= EXT4_MB_USE_ROOT_BLOCKS;
- /*
- * For delayed allocation, we could skip the ENOSPC and
- * EDQUOT check, as blocks and quotas have been already
- * reserved when data being copied into pagecache.
- */
- if (ext4_test_inode_state(ar->inode, EXT4_STATE_DELALLOC_RESERVED))
- ar->flags |= EXT4_MB_DELALLOC_RESERVED;
- else {
+ if ((ar->flags & EXT4_MB_DELALLOC_RESERVED) == 0) {
/* Without delayed allocation we need to verify
* there is enough free blocks to do block allocation
* and verify allocation doesn't exceed the quota limits.
if (inquota && ar->len < inquota)
dquot_free_block(ar->inode, EXT4_C2B(sbi, inquota - ar->len));
if (!ar->len) {
- if (!ext4_test_inode_state(ar->inode,
- EXT4_STATE_DELALLOC_RESERVED))
+ if ((ar->flags & EXT4_MB_DELALLOC_RESERVED) == 0)
/* release all the reserved blocks if non delalloc */
percpu_counter_sub(&sbi->s_dirtyclusters_counter,
reserv_clstrs);
ext4_ext_store_pblock(&newext, lb->first_pblock);
/* Locking only for convinience since we are operating on temp inode */
down_write(&EXT4_I(inode)->i_data_sem);
- path = ext4_ext_find_extent(inode, lb->first_block, NULL, 0);
-
+ path = ext4_find_extent(inode, lb->first_block, NULL, 0);
if (IS_ERR(path)) {
retval = PTR_ERR(path);
path = NULL;
goto err_out;
}
}
- retval = ext4_ext_insert_extent(handle, inode, path, &newext, 0);
+ retval = ext4_ext_insert_extent(handle, inode, &path, &newext, 0);
err_out:
up_write((&EXT4_I(inode)->i_data_sem));
- if (path) {
- ext4_ext_drop_refs(path);
- kfree(path);
- }
+ ext4_ext_drop_refs(path);
+ kfree(path);
lb->first_pblock = 0;
return retval;
}
static int ext4_mmp_csum_verify(struct super_block *sb, struct mmp_struct *mmp)
{
- if (!EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ if (!ext4_has_metadata_csum(sb))
return 1;
return mmp->mmp_checksum == ext4_mmp_csum(sb, mmp);
static void ext4_mmp_csum_set(struct super_block *sb, struct mmp_struct *mmp)
{
- if (!EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ if (!ext4_has_metadata_csum(sb))
return;
mmp->mmp_checksum = ext4_mmp_csum(sb, mmp);
* @lblock: logical block number to find an extent path
* @path: pointer to an extent path pointer (for output)
*
- * ext4_ext_find_extent wrapper. Return 0 on success, or a negative error value
+ * ext4_find_extent wrapper. Return 0 on success, or a negative error value
* on failure.
*/
static inline int
get_ext_path(struct inode *inode, ext4_lblk_t lblock,
- struct ext4_ext_path **orig_path)
+ struct ext4_ext_path **ppath)
{
- int ret = 0;
struct ext4_ext_path *path;
- path = ext4_ext_find_extent(inode, lblock, *orig_path, EXT4_EX_NOCACHE);
+ path = ext4_find_extent(inode, lblock, ppath, EXT4_EX_NOCACHE);
if (IS_ERR(path))
- ret = PTR_ERR(path);
- else if (path[ext_depth(inode)].p_ext == NULL)
- ret = -ENODATA;
- else
- *orig_path = path;
-
- return ret;
-}
-
-/**
- * copy_extent_status - Copy the extent's initialization status
- *
- * @src: an extent for getting initialize status
- * @dest: an extent to be set the status
- */
-static void
-copy_extent_status(struct ext4_extent *src, struct ext4_extent *dest)
-{
- if (ext4_ext_is_unwritten(src))
- ext4_ext_mark_unwritten(dest);
- else
- dest->ee_len = cpu_to_le16(ext4_ext_get_actual_len(dest));
-}
-
-/**
- * mext_next_extent - Search for the next extent and set it to "extent"
- *
- * @inode: inode which is searched
- * @path: this will obtain data for the next extent
- * @extent: pointer to the next extent we have just gotten
- *
- * Search the next extent in the array of ext4_ext_path structure (@path)
- * and set it to ext4_extent structure (@extent). In addition, the member of
- * @path (->p_ext) also points the next extent. Return 0 on success, 1 if
- * ext4_ext_path structure refers to the last extent, or a negative error
- * value on failure.
- */
-int
-mext_next_extent(struct inode *inode, struct ext4_ext_path *path,
- struct ext4_extent **extent)
-{
- struct ext4_extent_header *eh;
- int ppos, leaf_ppos = path->p_depth;
-
- ppos = leaf_ppos;
- if (EXT_LAST_EXTENT(path[ppos].p_hdr) > path[ppos].p_ext) {
- /* leaf block */
- *extent = ++path[ppos].p_ext;
- path[ppos].p_block = ext4_ext_pblock(path[ppos].p_ext);
- return 0;
- }
-
- while (--ppos >= 0) {
- if (EXT_LAST_INDEX(path[ppos].p_hdr) >
- path[ppos].p_idx) {
- int cur_ppos = ppos;
-
- /* index block */
- path[ppos].p_idx++;
- path[ppos].p_block = ext4_idx_pblock(path[ppos].p_idx);
- if (path[ppos+1].p_bh)
- brelse(path[ppos+1].p_bh);
- path[ppos+1].p_bh =
- sb_bread(inode->i_sb, path[ppos].p_block);
- if (!path[ppos+1].p_bh)
- return -EIO;
- path[ppos+1].p_hdr =
- ext_block_hdr(path[ppos+1].p_bh);
-
- /* Halfway index block */
- while (++cur_ppos < leaf_ppos) {
- path[cur_ppos].p_idx =
- EXT_FIRST_INDEX(path[cur_ppos].p_hdr);
- path[cur_ppos].p_block =
- ext4_idx_pblock(path[cur_ppos].p_idx);
- if (path[cur_ppos+1].p_bh)
- brelse(path[cur_ppos+1].p_bh);
- path[cur_ppos+1].p_bh = sb_bread(inode->i_sb,
- path[cur_ppos].p_block);
- if (!path[cur_ppos+1].p_bh)
- return -EIO;
- path[cur_ppos+1].p_hdr =
- ext_block_hdr(path[cur_ppos+1].p_bh);
- }
-
- path[leaf_ppos].p_ext = *extent = NULL;
-
- eh = path[leaf_ppos].p_hdr;
- if (le16_to_cpu(eh->eh_entries) == 0)
- /* empty leaf is found */
- return -ENODATA;
-
- /* leaf block */
- path[leaf_ppos].p_ext = *extent =
- EXT_FIRST_EXTENT(path[leaf_ppos].p_hdr);
- path[leaf_ppos].p_block =
- ext4_ext_pblock(path[leaf_ppos].p_ext);
- return 0;
- }
+ return PTR_ERR(path);
+ if (path[ext_depth(inode)].p_ext == NULL) {
+ ext4_ext_drop_refs(path);
+ kfree(path);
+ *ppath = NULL;
+ return -ENODATA;
}
- /* We found the last extent */
- return 1;
+ *ppath = path;
+ return 0;
}
/**
up_write(&EXT4_I(donor_inode)->i_data_sem);
}
-/**
- * mext_insert_across_blocks - Insert extents across leaf block
- *
- * @handle: journal handle
- * @orig_inode: original inode
- * @o_start: first original extent to be changed
- * @o_end: last original extent to be changed
- * @start_ext: first new extent to be inserted
- * @new_ext: middle of new extent to be inserted
- * @end_ext: last new extent to be inserted
- *
- * Allocate a new leaf block and insert extents into it. Return 0 on success,
- * or a negative error value on failure.
- */
-static int
-mext_insert_across_blocks(handle_t *handle, struct inode *orig_inode,
- struct ext4_extent *o_start, struct ext4_extent *o_end,
- struct ext4_extent *start_ext, struct ext4_extent *new_ext,
- struct ext4_extent *end_ext)
-{
- struct ext4_ext_path *orig_path = NULL;
- ext4_lblk_t eblock = 0;
- int new_flag = 0;
- int end_flag = 0;
- int err = 0;
-
- if (start_ext->ee_len && new_ext->ee_len && end_ext->ee_len) {
- if (o_start == o_end) {
-
- /* start_ext new_ext end_ext
- * donor |---------|-----------|--------|
- * orig |------------------------------|
- */
- end_flag = 1;
- } else {
-
- /* start_ext new_ext end_ext
- * donor |---------|----------|---------|
- * orig |---------------|--------------|
- */
- o_end->ee_block = end_ext->ee_block;
- o_end->ee_len = end_ext->ee_len;
- ext4_ext_store_pblock(o_end, ext4_ext_pblock(end_ext));
- }
-
- o_start->ee_len = start_ext->ee_len;
- eblock = le32_to_cpu(start_ext->ee_block);
- new_flag = 1;
-
- } else if (start_ext->ee_len && new_ext->ee_len &&
- !end_ext->ee_len && o_start == o_end) {
-
- /* start_ext new_ext
- * donor |--------------|---------------|
- * orig |------------------------------|
- */
- o_start->ee_len = start_ext->ee_len;
- eblock = le32_to_cpu(start_ext->ee_block);
- new_flag = 1;
-
- } else if (!start_ext->ee_len && new_ext->ee_len &&
- end_ext->ee_len && o_start == o_end) {
-
- /* new_ext end_ext
- * donor |--------------|---------------|
- * orig |------------------------------|
- */
- o_end->ee_block = end_ext->ee_block;
- o_end->ee_len = end_ext->ee_len;
- ext4_ext_store_pblock(o_end, ext4_ext_pblock(end_ext));
-
- /*
- * Set 0 to the extent block if new_ext was
- * the first block.
- */
- if (new_ext->ee_block)
- eblock = le32_to_cpu(new_ext->ee_block);
-
- new_flag = 1;
- } else {
- ext4_debug("ext4 move extent: Unexpected insert case\n");
- return -EIO;
- }
-
- if (new_flag) {
- err = get_ext_path(orig_inode, eblock, &orig_path);
- if (err)
- goto out;
-
- if (ext4_ext_insert_extent(handle, orig_inode,
- orig_path, new_ext, 0))
- goto out;
- }
-
- if (end_flag) {
- err = get_ext_path(orig_inode,
- le32_to_cpu(end_ext->ee_block) - 1, &orig_path);
- if (err)
- goto out;
-
- if (ext4_ext_insert_extent(handle, orig_inode,
- orig_path, end_ext, 0))
- goto out;
- }
-out:
- if (orig_path) {
- ext4_ext_drop_refs(orig_path);
- kfree(orig_path);
- }
-
- return err;
-
-}
-
-/**
- * mext_insert_inside_block - Insert new extent to the extent block
- *
- * @o_start: first original extent to be moved
- * @o_end: last original extent to be moved
- * @start_ext: first new extent to be inserted
- * @new_ext: middle of new extent to be inserted
- * @end_ext: last new extent to be inserted
- * @eh: extent header of target leaf block
- * @range_to_move: used to decide how to insert extent
- *
- * Insert extents into the leaf block. The extent (@o_start) is overwritten
- * by inserted extents.
- */
-static void
-mext_insert_inside_block(struct ext4_extent *o_start,
- struct ext4_extent *o_end,
- struct ext4_extent *start_ext,
- struct ext4_extent *new_ext,
- struct ext4_extent *end_ext,
- struct ext4_extent_header *eh,
- int range_to_move)
-{
- int i = 0;
- unsigned long len;
-
- /* Move the existing extents */
- if (range_to_move && o_end < EXT_LAST_EXTENT(eh)) {
- len = (unsigned long)(EXT_LAST_EXTENT(eh) + 1) -
- (unsigned long)(o_end + 1);
- memmove(o_end + 1 + range_to_move, o_end + 1, len);
- }
-
- /* Insert start entry */
- if (start_ext->ee_len)
- o_start[i++].ee_len = start_ext->ee_len;
-
- /* Insert new entry */
- if (new_ext->ee_len) {
- o_start[i] = *new_ext;
- ext4_ext_store_pblock(&o_start[i++], ext4_ext_pblock(new_ext));
- }
-
- /* Insert end entry */
- if (end_ext->ee_len)
- o_start[i] = *end_ext;
-
- /* Increment the total entries counter on the extent block */
- le16_add_cpu(&eh->eh_entries, range_to_move);
-}
-
-/**
- * mext_insert_extents - Insert new extent
- *
- * @handle: journal handle
- * @orig_inode: original inode
- * @orig_path: path indicates first extent to be changed
- * @o_start: first original extent to be changed
- * @o_end: last original extent to be changed
- * @start_ext: first new extent to be inserted
- * @new_ext: middle of new extent to be inserted
- * @end_ext: last new extent to be inserted
- *
- * Call the function to insert extents. If we cannot add more extents into
- * the leaf block, we call mext_insert_across_blocks() to create a
- * new leaf block. Otherwise call mext_insert_inside_block(). Return 0
- * on success, or a negative error value on failure.
- */
-static int
-mext_insert_extents(handle_t *handle, struct inode *orig_inode,
- struct ext4_ext_path *orig_path,
- struct ext4_extent *o_start,
- struct ext4_extent *o_end,
- struct ext4_extent *start_ext,
- struct ext4_extent *new_ext,
- struct ext4_extent *end_ext)
-{
- struct ext4_extent_header *eh;
- unsigned long need_slots, slots_range;
- int range_to_move, depth, ret;
-
- /*
- * The extents need to be inserted
- * start_extent + new_extent + end_extent.
- */
- need_slots = (start_ext->ee_len ? 1 : 0) + (end_ext->ee_len ? 1 : 0) +
- (new_ext->ee_len ? 1 : 0);
-
- /* The number of slots between start and end */
- slots_range = ((unsigned long)(o_end + 1) - (unsigned long)o_start + 1)
- / sizeof(struct ext4_extent);
-
- /* Range to move the end of extent */
- range_to_move = need_slots - slots_range;
- depth = orig_path->p_depth;
- orig_path += depth;
- eh = orig_path->p_hdr;
-
- if (depth) {
- /* Register to journal */
- BUFFER_TRACE(orig_path->p_bh, "get_write_access");
- ret = ext4_journal_get_write_access(handle, orig_path->p_bh);
- if (ret)
- return ret;
- }
-
- /* Expansion */
- if (range_to_move > 0 &&
- (range_to_move > le16_to_cpu(eh->eh_max)
- - le16_to_cpu(eh->eh_entries))) {
-
- ret = mext_insert_across_blocks(handle, orig_inode, o_start,
- o_end, start_ext, new_ext, end_ext);
- if (ret < 0)
- return ret;
- } else
- mext_insert_inside_block(o_start, o_end, start_ext, new_ext,
- end_ext, eh, range_to_move);
-
- return ext4_ext_dirty(handle, orig_inode, orig_path);
-}
-
-/**
- * mext_leaf_block - Move one leaf extent block into the inode.
- *
- * @handle: journal handle
- * @orig_inode: original inode
- * @orig_path: path indicates first extent to be changed
- * @dext: donor extent
- * @from: start offset on the target file
- *
- * In order to insert extents into the leaf block, we must divide the extent
- * in the leaf block into three extents. The one is located to be inserted
- * extents, and the others are located around it.
- *
- * Therefore, this function creates structures to save extents of the leaf
- * block, and inserts extents by calling mext_insert_extents() with
- * created extents. Return 0 on success, or a negative error value on failure.
- */
-static int
-mext_leaf_block(handle_t *handle, struct inode *orig_inode,
- struct ext4_ext_path *orig_path, struct ext4_extent *dext,
- ext4_lblk_t *from)
-{
- struct ext4_extent *oext, *o_start, *o_end, *prev_ext;
- struct ext4_extent new_ext, start_ext, end_ext;
- ext4_lblk_t new_ext_end;
- int oext_alen, new_ext_alen, end_ext_alen;
- int depth = ext_depth(orig_inode);
- int ret;
-
- start_ext.ee_block = end_ext.ee_block = 0;
- o_start = o_end = oext = orig_path[depth].p_ext;
- oext_alen = ext4_ext_get_actual_len(oext);
- start_ext.ee_len = end_ext.ee_len = 0;
-
- new_ext.ee_block = cpu_to_le32(*from);
- ext4_ext_store_pblock(&new_ext, ext4_ext_pblock(dext));
- new_ext.ee_len = dext->ee_len;
- new_ext_alen = ext4_ext_get_actual_len(&new_ext);
- new_ext_end = le32_to_cpu(new_ext.ee_block) + new_ext_alen - 1;
-
- /*
- * Case: original extent is first
- * oext |--------|
- * new_ext |--|
- * start_ext |--|
- */
- if (le32_to_cpu(oext->ee_block) < le32_to_cpu(new_ext.ee_block) &&
- le32_to_cpu(new_ext.ee_block) <
- le32_to_cpu(oext->ee_block) + oext_alen) {
- start_ext.ee_len = cpu_to_le16(le32_to_cpu(new_ext.ee_block) -
- le32_to_cpu(oext->ee_block));
- start_ext.ee_block = oext->ee_block;
- copy_extent_status(oext, &start_ext);
- } else if (oext > EXT_FIRST_EXTENT(orig_path[depth].p_hdr)) {
- prev_ext = oext - 1;
- /*
- * We can merge new_ext into previous extent,
- * if these are contiguous and same extent type.
- */
- if (ext4_can_extents_be_merged(orig_inode, prev_ext,
- &new_ext)) {
- o_start = prev_ext;
- start_ext.ee_len = cpu_to_le16(
- ext4_ext_get_actual_len(prev_ext) +
- new_ext_alen);
- start_ext.ee_block = oext->ee_block;
- copy_extent_status(prev_ext, &start_ext);
- new_ext.ee_len = 0;
- }
- }
-
- /*
- * Case: new_ext_end must be less than oext
- * oext |-----------|
- * new_ext |-------|
- */
- if (le32_to_cpu(oext->ee_block) + oext_alen - 1 < new_ext_end) {
- EXT4_ERROR_INODE(orig_inode,
- "new_ext_end(%u) should be less than or equal to "
- "oext->ee_block(%u) + oext_alen(%d) - 1",
- new_ext_end, le32_to_cpu(oext->ee_block),
- oext_alen);
- ret = -EIO;
- goto out;
- }
-
- /*
- * Case: new_ext is smaller than original extent
- * oext |---------------|
- * new_ext |-----------|
- * end_ext |---|
- */
- if (le32_to_cpu(oext->ee_block) <= new_ext_end &&
- new_ext_end < le32_to_cpu(oext->ee_block) + oext_alen - 1) {
- end_ext.ee_len =
- cpu_to_le16(le32_to_cpu(oext->ee_block) +
- oext_alen - 1 - new_ext_end);
- copy_extent_status(oext, &end_ext);
- end_ext_alen = ext4_ext_get_actual_len(&end_ext);
- ext4_ext_store_pblock(&end_ext,
- (ext4_ext_pblock(o_end) + oext_alen - end_ext_alen));
- end_ext.ee_block =
- cpu_to_le32(le32_to_cpu(o_end->ee_block) +
- oext_alen - end_ext_alen);
- }
-
- ret = mext_insert_extents(handle, orig_inode, orig_path, o_start,
- o_end, &start_ext, &new_ext, &end_ext);
-out:
- return ret;
-}
-
-/**
- * mext_calc_swap_extents - Calculate extents for extent swapping.
- *
- * @tmp_dext: the extent that will belong to the original inode
- * @tmp_oext: the extent that will belong to the donor inode
- * @orig_off: block offset of original inode
- * @donor_off: block offset of donor inode
- * @max_count: the maximum length of extents
- *
- * Return 0 on success, or a negative error value on failure.
- */
-static int
-mext_calc_swap_extents(struct ext4_extent *tmp_dext,
- struct ext4_extent *tmp_oext,
- ext4_lblk_t orig_off, ext4_lblk_t donor_off,
- ext4_lblk_t max_count)
-{
- ext4_lblk_t diff, orig_diff;
- struct ext4_extent dext_old, oext_old;
-
- BUG_ON(orig_off != donor_off);
-
- /* original and donor extents have to cover the same block offset */
- if (orig_off < le32_to_cpu(tmp_oext->ee_block) ||
- le32_to_cpu(tmp_oext->ee_block) +
- ext4_ext_get_actual_len(tmp_oext) - 1 < orig_off)
- return -ENODATA;
-
- if (orig_off < le32_to_cpu(tmp_dext->ee_block) ||
- le32_to_cpu(tmp_dext->ee_block) +
- ext4_ext_get_actual_len(tmp_dext) - 1 < orig_off)
- return -ENODATA;
-
- dext_old = *tmp_dext;
- oext_old = *tmp_oext;
-
- /* When tmp_dext is too large, pick up the target range. */
- diff = donor_off - le32_to_cpu(tmp_dext->ee_block);
-
- ext4_ext_store_pblock(tmp_dext, ext4_ext_pblock(tmp_dext) + diff);
- le32_add_cpu(&tmp_dext->ee_block, diff);
- le16_add_cpu(&tmp_dext->ee_len, -diff);
-
- if (max_count < ext4_ext_get_actual_len(tmp_dext))
- tmp_dext->ee_len = cpu_to_le16(max_count);
-
- orig_diff = orig_off - le32_to_cpu(tmp_oext->ee_block);
- ext4_ext_store_pblock(tmp_oext, ext4_ext_pblock(tmp_oext) + orig_diff);
-
- /* Adjust extent length if donor extent is larger than orig */
- if (ext4_ext_get_actual_len(tmp_dext) >
- ext4_ext_get_actual_len(tmp_oext) - orig_diff)
- tmp_dext->ee_len = cpu_to_le16(le16_to_cpu(tmp_oext->ee_len) -
- orig_diff);
-
- tmp_oext->ee_len = cpu_to_le16(ext4_ext_get_actual_len(tmp_dext));
-
- copy_extent_status(&oext_old, tmp_dext);
- copy_extent_status(&dext_old, tmp_oext);
-
- return 0;
-}
-
/**
* mext_check_coverage - Check that all extents in range has the same type
*
}
ret = 1;
out:
- if (path) {
- ext4_ext_drop_refs(path);
- kfree(path);
- }
+ ext4_ext_drop_refs(path);
+ kfree(path);
return ret;
}
-/**
- * mext_replace_branches - Replace original extents with new extents
- *
- * @handle: journal handle
- * @orig_inode: original inode
- * @donor_inode: donor inode
- * @from: block offset of orig_inode
- * @count: block count to be replaced
- * @err: pointer to save return value
- *
- * Replace original inode extents and donor inode extents page by page.
- * We implement this replacement in the following three steps:
- * 1. Save the block information of original and donor inodes into
- * dummy extents.
- * 2. Change the block information of original inode to point at the
- * donor inode blocks.
- * 3. Change the block information of donor inode to point at the saved
- * original inode blocks in the dummy extents.
- *
- * Return replaced block count.
- */
-static int
-mext_replace_branches(handle_t *handle, struct inode *orig_inode,
- struct inode *donor_inode, ext4_lblk_t from,
- ext4_lblk_t count, int *err)
-{
- struct ext4_ext_path *orig_path = NULL;
- struct ext4_ext_path *donor_path = NULL;
- struct ext4_extent *oext, *dext;
- struct ext4_extent tmp_dext, tmp_oext;
- ext4_lblk_t orig_off = from, donor_off = from;
- int depth;
- int replaced_count = 0;
- int dext_alen;
-
- *err = ext4_es_remove_extent(orig_inode, from, count);
- if (*err)
- goto out;
-
- *err = ext4_es_remove_extent(donor_inode, from, count);
- if (*err)
- goto out;
-
- /* Get the original extent for the block "orig_off" */
- *err = get_ext_path(orig_inode, orig_off, &orig_path);
- if (*err)
- goto out;
-
- /* Get the donor extent for the head */
- *err = get_ext_path(donor_inode, donor_off, &donor_path);
- if (*err)
- goto out;
- depth = ext_depth(orig_inode);
- oext = orig_path[depth].p_ext;
- tmp_oext = *oext;
-
- depth = ext_depth(donor_inode);
- dext = donor_path[depth].p_ext;
- if (unlikely(!dext))
- goto missing_donor_extent;
- tmp_dext = *dext;
-
- *err = mext_calc_swap_extents(&tmp_dext, &tmp_oext, orig_off,
- donor_off, count);
- if (*err)
- goto out;
-
- /* Loop for the donor extents */
- while (1) {
- /* The extent for donor must be found. */
- if (unlikely(!dext)) {
- missing_donor_extent:
- EXT4_ERROR_INODE(donor_inode,
- "The extent for donor must be found");
- *err = -EIO;
- goto out;
- } else if (donor_off != le32_to_cpu(tmp_dext.ee_block)) {
- EXT4_ERROR_INODE(donor_inode,
- "Donor offset(%u) and the first block of donor "
- "extent(%u) should be equal",
- donor_off,
- le32_to_cpu(tmp_dext.ee_block));
- *err = -EIO;
- goto out;
- }
-
- /* Set donor extent to orig extent */
- *err = mext_leaf_block(handle, orig_inode,
- orig_path, &tmp_dext, &orig_off);
- if (*err)
- goto out;
-
- /* Set orig extent to donor extent */
- *err = mext_leaf_block(handle, donor_inode,
- donor_path, &tmp_oext, &donor_off);
- if (*err)
- goto out;
-
- dext_alen = ext4_ext_get_actual_len(&tmp_dext);
- replaced_count += dext_alen;
- donor_off += dext_alen;
- orig_off += dext_alen;
-
- BUG_ON(replaced_count > count);
- /* Already moved the expected blocks */
- if (replaced_count >= count)
- break;
-
- if (orig_path)
- ext4_ext_drop_refs(orig_path);
- *err = get_ext_path(orig_inode, orig_off, &orig_path);
- if (*err)
- goto out;
- depth = ext_depth(orig_inode);
- oext = orig_path[depth].p_ext;
- tmp_oext = *oext;
-
- if (donor_path)
- ext4_ext_drop_refs(donor_path);
- *err = get_ext_path(donor_inode, donor_off, &donor_path);
- if (*err)
- goto out;
- depth = ext_depth(donor_inode);
- dext = donor_path[depth].p_ext;
- tmp_dext = *dext;
-
- *err = mext_calc_swap_extents(&tmp_dext, &tmp_oext, orig_off,
- donor_off, count - replaced_count);
- if (*err)
- goto out;
- }
-
-out:
- if (orig_path) {
- ext4_ext_drop_refs(orig_path);
- kfree(orig_path);
- }
- if (donor_path) {
- ext4_ext_drop_refs(donor_path);
- kfree(donor_path);
- }
-
- return replaced_count;
-}
-
/**
* mext_page_double_lock - Grab and lock pages on both @inode1 and @inode2
*
* @inode1: the inode structure
* @inode2: the inode structure
- * @index: page index
+ * @index1: page index
+ * @index2: page index
* @page: result page vector
*
* Grab two locked pages for inode's by inode order
*/
static int
mext_page_double_lock(struct inode *inode1, struct inode *inode2,
- pgoff_t index, struct page *page[2])
+ pgoff_t index1, pgoff_t index2, struct page *page[2])
{
struct address_space *mapping[2];
unsigned fl = AOP_FLAG_NOFS;
mapping[0] = inode1->i_mapping;
mapping[1] = inode2->i_mapping;
} else {
+ pgoff_t tmp = index1;
+ index1 = index2;
+ index2 = tmp;
mapping[0] = inode2->i_mapping;
mapping[1] = inode1->i_mapping;
}
- page[0] = grab_cache_page_write_begin(mapping[0], index, fl);
+ page[0] = grab_cache_page_write_begin(mapping[0], index1, fl);
if (!page[0])
return -ENOMEM;
- page[1] = grab_cache_page_write_begin(mapping[1], index, fl);
+ page[1] = grab_cache_page_write_begin(mapping[1], index2, fl);
if (!page[1]) {
unlock_page(page[0]);
page_cache_release(page[0]);
* @o_filp: file structure of original file
* @donor_inode: donor inode
* @orig_page_offset: page index on original file
+ * @donor_page_offset: page index on donor file
* @data_offset_in_page: block index where data swapping starts
* @block_len_in_page: the number of blocks to be swapped
* @unwritten: orig extent is unwritten or not
* @err: pointer to save return value
*
* Save the data in original inode blocks and replace original inode extents
- * with donor inode extents by calling mext_replace_branches().
+ * with donor inode extents by calling ext4_swap_extents().
* Finally, write out the saved data in new original inode blocks. Return
* replaced block count.
*/
static int
move_extent_per_page(struct file *o_filp, struct inode *donor_inode,
- pgoff_t orig_page_offset, int data_offset_in_page,
- int block_len_in_page, int unwritten, int *err)
+ pgoff_t orig_page_offset, pgoff_t donor_page_offset,
+ int data_offset_in_page,
+ int block_len_in_page, int unwritten, int *err)
{
struct inode *orig_inode = file_inode(o_filp);
struct page *pagep[2] = {NULL, NULL};
handle_t *handle;
- ext4_lblk_t orig_blk_offset;
+ ext4_lblk_t orig_blk_offset, donor_blk_offset;
unsigned long blocksize = orig_inode->i_sb->s_blocksize;
unsigned int w_flags = 0;
unsigned int tmp_data_size, data_size, replaced_size;
orig_blk_offset = orig_page_offset * blocks_per_page +
data_offset_in_page;
+ donor_blk_offset = donor_page_offset * blocks_per_page +
+ data_offset_in_page;
+
/* Calculate data_size */
if ((orig_blk_offset + block_len_in_page - 1) ==
((orig_inode->i_size - 1) >> orig_inode->i_blkbits)) {
replaced_size = data_size;
*err = mext_page_double_lock(orig_inode, donor_inode, orig_page_offset,
- pagep);
+ donor_page_offset, pagep);
if (unlikely(*err < 0))
goto stop_journal;
/*
if (*err)
goto drop_data_sem;
- unwritten &= mext_check_coverage(donor_inode, orig_blk_offset,
+ unwritten &= mext_check_coverage(donor_inode, donor_blk_offset,
block_len_in_page, 1, err);
if (*err)
goto drop_data_sem;
*err = -EBUSY;
goto drop_data_sem;
}
- replaced_count = mext_replace_branches(handle, orig_inode,
- donor_inode, orig_blk_offset,
- block_len_in_page, err);
+ replaced_count = ext4_swap_extents(handle, orig_inode,
+ donor_inode, orig_blk_offset,
+ donor_blk_offset,
+ block_len_in_page, 1, err);
drop_data_sem:
ext4_double_up_write_data_sem(orig_inode, donor_inode);
goto unlock_pages;
goto unlock_pages;
}
ext4_double_down_write_data_sem(orig_inode, donor_inode);
- replaced_count = mext_replace_branches(handle, orig_inode, donor_inode,
- orig_blk_offset,
- block_len_in_page, err);
+ replaced_count = ext4_swap_extents(handle, orig_inode, donor_inode,
+ orig_blk_offset, donor_blk_offset,
+ block_len_in_page, 1, err);
ext4_double_up_write_data_sem(orig_inode, donor_inode);
if (*err) {
if (replaced_count) {
* Try to swap extents to it's original places
*/
ext4_double_down_write_data_sem(orig_inode, donor_inode);
- replaced_count = mext_replace_branches(handle, donor_inode, orig_inode,
- orig_blk_offset,
- block_len_in_page, &err2);
+ replaced_count = ext4_swap_extents(handle, donor_inode, orig_inode,
+ orig_blk_offset, donor_blk_offset,
+ block_len_in_page, 0, &err2);
ext4_double_up_write_data_sem(orig_inode, donor_inode);
if (replaced_count != block_len_in_page) {
EXT4_ERROR_INODE_BLOCK(orig_inode, (sector_t)(orig_blk_offset),
struct inode *donor_inode, __u64 orig_start,
__u64 donor_start, __u64 *len)
{
- ext4_lblk_t orig_blocks, donor_blocks;
+ __u64 orig_eof, donor_eof;
unsigned int blkbits = orig_inode->i_blkbits;
unsigned int blocksize = 1 << blkbits;
+ orig_eof = (i_size_read(orig_inode) + blocksize - 1) >> blkbits;
+ donor_eof = (i_size_read(donor_inode) + blocksize - 1) >> blkbits;
+
+
if (donor_inode->i_mode & (S_ISUID|S_ISGID)) {
ext4_debug("ext4 move extent: suid or sgid is set"
" to donor file [ino:orig %lu, donor %lu]\n",
ext4_debug("ext4 move extent: The argument files should "
"not be swapfile [ino:orig %lu, donor %lu]\n",
orig_inode->i_ino, donor_inode->i_ino);
- return -EINVAL;
+ return -EBUSY;
}
/* Ext4 move extent supports only extent based file */
}
/* Start offset should be same */
- if (orig_start != donor_start) {
+ if ((orig_start & ~(PAGE_MASK >> orig_inode->i_blkbits)) !=
+ (donor_start & ~(PAGE_MASK >> orig_inode->i_blkbits))) {
ext4_debug("ext4 move extent: orig and donor's start "
- "offset are not same [ino:orig %lu, donor %lu]\n",
+ "offset are not alligned [ino:orig %lu, donor %lu]\n",
orig_inode->i_ino, donor_inode->i_ino);
return -EINVAL;
}
if ((orig_start >= EXT_MAX_BLOCKS) ||
+ (donor_start >= EXT_MAX_BLOCKS) ||
(*len > EXT_MAX_BLOCKS) ||
+ (donor_start + *len >= EXT_MAX_BLOCKS) ||
(orig_start + *len >= EXT_MAX_BLOCKS)) {
ext4_debug("ext4 move extent: Can't handle over [%u] blocks "
"[ino:orig %lu, donor %lu]\n", EXT_MAX_BLOCKS,
orig_inode->i_ino, donor_inode->i_ino);
return -EINVAL;
}
-
- if (orig_inode->i_size > donor_inode->i_size) {
- donor_blocks = (donor_inode->i_size + blocksize - 1) >> blkbits;
- /* TODO: eliminate this artificial restriction */
- if (orig_start >= donor_blocks) {
- ext4_debug("ext4 move extent: orig start offset "
- "[%llu] should be less than donor file blocks "
- "[%u] [ino:orig %lu, donor %lu]\n",
- orig_start, donor_blocks,
- orig_inode->i_ino, donor_inode->i_ino);
- return -EINVAL;
- }
-
- /* TODO: eliminate this artificial restriction */
- if (orig_start + *len > donor_blocks) {
- ext4_debug("ext4 move extent: End offset [%llu] should "
- "be less than donor file blocks [%u]."
- "So adjust length from %llu to %llu "
- "[ino:orig %lu, donor %lu]\n",
- orig_start + *len, donor_blocks,
- *len, donor_blocks - orig_start,
- orig_inode->i_ino, donor_inode->i_ino);
- *len = donor_blocks - orig_start;
- }
- } else {
- orig_blocks = (orig_inode->i_size + blocksize - 1) >> blkbits;
- if (orig_start >= orig_blocks) {
- ext4_debug("ext4 move extent: start offset [%llu] "
- "should be less than original file blocks "
- "[%u] [ino:orig %lu, donor %lu]\n",
- orig_start, orig_blocks,
- orig_inode->i_ino, donor_inode->i_ino);
- return -EINVAL;
- }
-
- if (orig_start + *len > orig_blocks) {
- ext4_debug("ext4 move extent: Adjust length "
- "from %llu to %llu. Because it should be "
- "less than original file blocks "
- "[ino:orig %lu, donor %lu]\n",
- *len, orig_blocks - orig_start,
- orig_inode->i_ino, donor_inode->i_ino);
- *len = orig_blocks - orig_start;
- }
- }
-
+ if (orig_eof < orig_start + *len - 1)
+ *len = orig_eof - orig_start;
+ if (donor_eof < donor_start + *len - 1)
+ *len = donor_eof - donor_start;
if (!*len) {
ext4_debug("ext4 move extent: len should not be 0 "
"[ino:orig %lu, donor %lu]\n", orig_inode->i_ino,
*
* @o_filp: file structure of the original file
* @d_filp: file structure of the donor file
- * @orig_start: start offset in block for orig
- * @donor_start: start offset in block for donor
+ * @orig_blk: start offset in block for orig
+ * @donor_blk: start offset in block for donor
* @len: the number of blocks to be moved
* @moved_len: moved block length
*
* This function returns 0 and moved block length is set in moved_len
* if succeed, otherwise returns error value.
*
- * Note: ext4_move_extents() proceeds the following order.
- * 1:ext4_move_extents() calculates the last block number of moving extent
- * function by the start block number (orig_start) and the number of blocks
- * to be moved (len) specified as arguments.
- * If the {orig, donor}_start points a hole, the extent's start offset
- * pointed by ext_cur (current extent), holecheck_path, orig_path are set
- * after hole behind.
- * 2:Continue step 3 to step 5, until the holecheck_path points to last_extent
- * or the ext_cur exceeds the block_end which is last logical block number.
- * 3:To get the length of continues area, call mext_next_extent()
- * specified with the ext_cur (initial value is holecheck_path) re-cursive,
- * until find un-continuous extent, the start logical block number exceeds
- * the block_end or the extent points to the last extent.
- * 4:Exchange the original inode data with donor inode data
- * from orig_page_offset to seq_end_page.
- * The start indexes of data are specified as arguments.
- * That of the original inode is orig_page_offset,
- * and the donor inode is also orig_page_offset
- * (To easily handle blocksize != pagesize case, the offset for the
- * donor inode is block unit).
- * 5:Update holecheck_path and orig_path to points a next proceeding extent,
- * then returns to step 2.
- * 6:Release holecheck_path, orig_path and set the len to moved_len
- * which shows the number of moved blocks.
- * The moved_len is useful for the command to calculate the file offset
- * for starting next move extent ioctl.
- * 7:Return 0 on success, or a negative error value on failure.
*/
int
-ext4_move_extents(struct file *o_filp, struct file *d_filp,
- __u64 orig_start, __u64 donor_start, __u64 len,
- __u64 *moved_len)
+ext4_move_extents(struct file *o_filp, struct file *d_filp, __u64 orig_blk,
+ __u64 donor_blk, __u64 len, __u64 *moved_len)
{
struct inode *orig_inode = file_inode(o_filp);
struct inode *donor_inode = file_inode(d_filp);
- struct ext4_ext_path *orig_path = NULL, *holecheck_path = NULL;
- struct ext4_extent *ext_prev, *ext_cur, *ext_dummy;
- ext4_lblk_t block_start = orig_start;
- ext4_lblk_t block_end, seq_start, add_blocks, file_end, seq_blocks = 0;
- ext4_lblk_t rest_blocks;
- pgoff_t orig_page_offset = 0, seq_end_page;
- int ret, depth, last_extent = 0;
+ struct ext4_ext_path *path = NULL;
int blocks_per_page = PAGE_CACHE_SIZE >> orig_inode->i_blkbits;
- int data_offset_in_page;
- int block_len_in_page;
- int unwritten;
+ ext4_lblk_t o_end, o_start = orig_blk;
+ ext4_lblk_t d_start = donor_blk;
+ int ret;
if (orig_inode->i_sb != donor_inode->i_sb) {
ext4_debug("ext4 move extent: The argument files "
/* Protect extent tree against block allocations via delalloc */
ext4_double_down_write_data_sem(orig_inode, donor_inode);
/* Check the filesystem environment whether move_extent can be done */
- ret = mext_check_arguments(orig_inode, donor_inode, orig_start,
- donor_start, &len);
+ ret = mext_check_arguments(orig_inode, donor_inode, orig_blk,
+ donor_blk, &len);
if (ret)
goto out;
+ o_end = o_start + len;
- file_end = (i_size_read(orig_inode) - 1) >> orig_inode->i_blkbits;
- block_end = block_start + len - 1;
- if (file_end < block_end)
- len -= block_end - file_end;
+ while (o_start < o_end) {
+ struct ext4_extent *ex;
+ ext4_lblk_t cur_blk, next_blk;
+ pgoff_t orig_page_index, donor_page_index;
+ int offset_in_page;
+ int unwritten, cur_len;
- ret = get_ext_path(orig_inode, block_start, &orig_path);
- if (ret)
- goto out;
-
- /* Get path structure to check the hole */
- ret = get_ext_path(orig_inode, block_start, &holecheck_path);
- if (ret)
- goto out;
-
- depth = ext_depth(orig_inode);
- ext_cur = holecheck_path[depth].p_ext;
-
- /*
- * Get proper starting location of block replacement if block_start was
- * within the hole.
- */
- if (le32_to_cpu(ext_cur->ee_block) +
- ext4_ext_get_actual_len(ext_cur) - 1 < block_start) {
- /*
- * The hole exists between extents or the tail of
- * original file.
- */
- last_extent = mext_next_extent(orig_inode,
- holecheck_path, &ext_cur);
- if (last_extent < 0) {
- ret = last_extent;
- goto out;
- }
- last_extent = mext_next_extent(orig_inode, orig_path,
- &ext_dummy);
- if (last_extent < 0) {
- ret = last_extent;
+ ret = get_ext_path(orig_inode, o_start, &path);
+ if (ret)
goto out;
- }
- seq_start = le32_to_cpu(ext_cur->ee_block);
- } else if (le32_to_cpu(ext_cur->ee_block) > block_start)
- /* The hole exists at the beginning of original file. */
- seq_start = le32_to_cpu(ext_cur->ee_block);
- else
- seq_start = block_start;
-
- /* No blocks within the specified range. */
- if (le32_to_cpu(ext_cur->ee_block) > block_end) {
- ext4_debug("ext4 move extent: The specified range of file "
- "may be the hole\n");
- ret = -EINVAL;
- goto out;
- }
-
- /* Adjust start blocks */
- add_blocks = min(le32_to_cpu(ext_cur->ee_block) +
- ext4_ext_get_actual_len(ext_cur), block_end + 1) -
- max(le32_to_cpu(ext_cur->ee_block), block_start);
-
- while (!last_extent && le32_to_cpu(ext_cur->ee_block) <= block_end) {
- seq_blocks += add_blocks;
-
- /* Adjust tail blocks */
- if (seq_start + seq_blocks - 1 > block_end)
- seq_blocks = block_end - seq_start + 1;
-
- ext_prev = ext_cur;
- last_extent = mext_next_extent(orig_inode, holecheck_path,
- &ext_cur);
- if (last_extent < 0) {
- ret = last_extent;
- break;
- }
- add_blocks = ext4_ext_get_actual_len(ext_cur);
-
- /*
- * Extend the length of contiguous block (seq_blocks)
- * if extents are contiguous.
- */
- if (ext4_can_extents_be_merged(orig_inode,
- ext_prev, ext_cur) &&
- block_end >= le32_to_cpu(ext_cur->ee_block) &&
- !last_extent)
+ ex = path[path->p_depth].p_ext;
+ next_blk = ext4_ext_next_allocated_block(path);
+ cur_blk = le32_to_cpu(ex->ee_block);
+ cur_len = ext4_ext_get_actual_len(ex);
+ /* Check hole before the start pos */
+ if (cur_blk + cur_len - 1 < o_start) {
+ if (next_blk == EXT_MAX_BLOCKS) {
+ o_start = o_end;
+ ret = -ENODATA;
+ goto out;
+ }
+ d_start += next_blk - o_start;
+ o_start = next_blk;
continue;
-
- /* Is original extent is unwritten */
- unwritten = ext4_ext_is_unwritten(ext_prev);
-
- data_offset_in_page = seq_start % blocks_per_page;
-
- /*
- * Calculate data blocks count that should be swapped
- * at the first page.
- */
- if (data_offset_in_page + seq_blocks > blocks_per_page) {
- /* Swapped blocks are across pages */
- block_len_in_page =
- blocks_per_page - data_offset_in_page;
- } else {
- /* Swapped blocks are in a page */
- block_len_in_page = seq_blocks;
+ /* Check hole after the start pos */
+ } else if (cur_blk > o_start) {
+ /* Skip hole */
+ d_start += cur_blk - o_start;
+ o_start = cur_blk;
+ /* Extent inside requested range ?*/
+ if (cur_blk >= o_end)
+ goto out;
+ } else { /* in_range(o_start, o_blk, o_len) */
+ cur_len += cur_blk - o_start;
}
-
- orig_page_offset = seq_start >>
- (PAGE_CACHE_SHIFT - orig_inode->i_blkbits);
- seq_end_page = (seq_start + seq_blocks - 1) >>
- (PAGE_CACHE_SHIFT - orig_inode->i_blkbits);
- seq_start = le32_to_cpu(ext_cur->ee_block);
- rest_blocks = seq_blocks;
-
+ unwritten = ext4_ext_is_unwritten(ex);
+ if (o_end - o_start < cur_len)
+ cur_len = o_end - o_start;
+
+ orig_page_index = o_start >> (PAGE_CACHE_SHIFT -
+ orig_inode->i_blkbits);
+ donor_page_index = d_start >> (PAGE_CACHE_SHIFT -
+ donor_inode->i_blkbits);
+ offset_in_page = o_start % blocks_per_page;
+ if (cur_len > blocks_per_page- offset_in_page)
+ cur_len = blocks_per_page - offset_in_page;
/*
* Up semaphore to avoid following problems:
* a. transaction deadlock among ext4_journal_start,
* in move_extent_per_page
*/
ext4_double_up_write_data_sem(orig_inode, donor_inode);
-
- while (orig_page_offset <= seq_end_page) {
-
- /* Swap original branches with new branches */
- block_len_in_page = move_extent_per_page(
- o_filp, donor_inode,
- orig_page_offset,
- data_offset_in_page,
- block_len_in_page,
- unwritten, &ret);
-
- /* Count how many blocks we have exchanged */
- *moved_len += block_len_in_page;
- if (ret < 0)
- break;
- if (*moved_len > len) {
- EXT4_ERROR_INODE(orig_inode,
- "We replaced blocks too much! "
- "sum of replaced: %llu requested: %llu",
- *moved_len, len);
- ret = -EIO;
- break;
- }
-
- orig_page_offset++;
- data_offset_in_page = 0;
- rest_blocks -= block_len_in_page;
- if (rest_blocks > blocks_per_page)
- block_len_in_page = blocks_per_page;
- else
- block_len_in_page = rest_blocks;
- }
-
+ /* Swap original branches with new branches */
+ move_extent_per_page(o_filp, donor_inode,
+ orig_page_index, donor_page_index,
+ offset_in_page, cur_len,
+ unwritten, &ret);
ext4_double_down_write_data_sem(orig_inode, donor_inode);
if (ret < 0)
break;
-
- /* Decrease buffer counter */
- if (holecheck_path)
- ext4_ext_drop_refs(holecheck_path);
- ret = get_ext_path(orig_inode, seq_start, &holecheck_path);
- if (ret)
- break;
- depth = holecheck_path->p_depth;
-
- /* Decrease buffer counter */
- if (orig_path)
- ext4_ext_drop_refs(orig_path);
- ret = get_ext_path(orig_inode, seq_start, &orig_path);
- if (ret)
- break;
-
- ext_cur = holecheck_path[depth].p_ext;
- add_blocks = ext4_ext_get_actual_len(ext_cur);
- seq_blocks = 0;
-
+ o_start += cur_len;
+ d_start += cur_len;
}
+ *moved_len = o_start - orig_blk;
+ if (*moved_len > len)
+ *moved_len = len;
+
out:
if (*moved_len) {
ext4_discard_preallocations(orig_inode);
ext4_discard_preallocations(donor_inode);
}
- if (orig_path) {
- ext4_ext_drop_refs(orig_path);
- kfree(orig_path);
- }
- if (holecheck_path) {
- ext4_ext_drop_refs(holecheck_path);
- kfree(holecheck_path);
- }
+ ext4_ext_drop_refs(path);
+ kfree(path);
ext4_double_up_write_data_sem(orig_inode, donor_inode);
ext4_inode_resume_unlocked_dio(orig_inode);
ext4_inode_resume_unlocked_dio(donor_inode);
ext4_lblk_t *block)
{
struct buffer_head *bh;
- int err = 0;
+ int err;
if (unlikely(EXT4_SB(inode->i_sb)->s_max_dir_size_kb &&
((inode->i_size >> 10) >=
*block = inode->i_size >> inode->i_sb->s_blocksize_bits;
- bh = ext4_bread(handle, inode, *block, 1, &err);
- if (!bh)
- return ERR_PTR(err);
+ bh = ext4_bread(handle, inode, *block, 1);
+ if (IS_ERR(bh))
+ return bh;
inode->i_size += inode->i_sb->s_blocksize;
EXT4_I(inode)->i_disksize = inode->i_size;
BUFFER_TRACE(bh, "get_write_access");
{
struct buffer_head *bh;
struct ext4_dir_entry *dirent;
- int err = 0, is_dx_block = 0;
+ int is_dx_block = 0;
- bh = ext4_bread(NULL, inode, block, 0, &err);
- if (!bh) {
- if (err == 0) {
- ext4_error_inode(inode, __func__, line, block,
- "Directory hole found");
- return ERR_PTR(-EIO);
- }
+ bh = ext4_bread(NULL, inode, block, 0);
+ if (IS_ERR(bh)) {
__ext4_warning(inode->i_sb, __func__, line,
- "error reading directory block "
- "(ino %lu, block %lu)", inode->i_ino,
+ "error %ld reading directory block "
+ "(ino %lu, block %lu)", PTR_ERR(bh), inode->i_ino,
(unsigned long) block);
- return ERR_PTR(err);
+
+ return bh;
+ }
+ if (!bh) {
+ ext4_error_inode(inode, __func__, line, block, "Directory hole found");
+ return ERR_PTR(-EIO);
}
dirent = (struct ext4_dir_entry *) bh->b_data;
/* Determine whether or not we have an index block */
"directory leaf block found instead of index block");
return ERR_PTR(-EIO);
}
- if (!EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM) ||
+ if (!ext4_has_metadata_csum(inode->i_sb) ||
buffer_verified(bh))
return bh;
static struct dx_frame *dx_probe(const struct qstr *d_name,
struct inode *dir,
struct dx_hash_info *hinfo,
- struct dx_frame *frame,
- int *err);
+ struct dx_frame *frame);
static void dx_release(struct dx_frame *frames);
static int dx_make_map(struct ext4_dir_entry_2 *de, unsigned blocksize,
struct dx_hash_info *hinfo, struct dx_map_entry map[]);
__u32 *start_hash);
static struct buffer_head * ext4_dx_find_entry(struct inode *dir,
const struct qstr *d_name,
- struct ext4_dir_entry_2 **res_dir,
- int *err);
+ struct ext4_dir_entry_2 **res_dir);
static int ext4_dx_add_entry(handle_t *handle, struct dentry *dentry,
struct inode *inode);
{
struct ext4_dir_entry_tail *t;
- if (!EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ if (!ext4_has_metadata_csum(inode->i_sb))
return 1;
t = get_dirent_tail(inode, dirent);
{
struct ext4_dir_entry_tail *t;
- if (!EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ if (!ext4_has_metadata_csum(inode->i_sb))
return;
t = get_dirent_tail(inode, dirent);
struct dx_tail *t;
int count_offset, limit, count;
- if (!EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ if (!ext4_has_metadata_csum(inode->i_sb))
return 1;
c = get_dx_countlimit(inode, dirent, &count_offset);
struct dx_tail *t;
int count_offset, limit, count;
- if (!EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ if (!ext4_has_metadata_csum(inode->i_sb))
return;
c = get_dx_countlimit(inode, dirent, &count_offset);
unsigned entry_space = dir->i_sb->s_blocksize - EXT4_DIR_REC_LEN(1) -
EXT4_DIR_REC_LEN(2) - infosize;
- if (EXT4_HAS_RO_COMPAT_FEATURE(dir->i_sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ if (ext4_has_metadata_csum(dir->i_sb))
entry_space -= sizeof(struct dx_tail);
return entry_space / sizeof(struct dx_entry);
}
{
unsigned entry_space = dir->i_sb->s_blocksize - EXT4_DIR_REC_LEN(0);
- if (EXT4_HAS_RO_COMPAT_FEATURE(dir->i_sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ if (ext4_has_metadata_csum(dir->i_sb))
entry_space -= sizeof(struct dx_tail);
return entry_space / sizeof(struct dx_entry);
}
u32 range = i < count - 1? (dx_get_hash(entries + 1) - hash): ~hash;
struct stats stats;
printk("%s%3u:%03u hash %8x/%8x ",levels?"":" ", i, block, hash, range);
- if (!(bh = ext4_bread (NULL,dir, block, 0,&err))) continue;
+ bh = ext4_bread(NULL,dir, block, 0);
+ if (!bh || IS_ERR(bh))
+ continue;
stats = levels?
dx_show_entries(hinfo, dir, ((struct dx_node *) bh->b_data)->entries, levels - 1):
dx_show_leaf(hinfo, (struct ext4_dir_entry_2 *) bh->b_data, blocksize, 0);
*/
static struct dx_frame *
dx_probe(const struct qstr *d_name, struct inode *dir,
- struct dx_hash_info *hinfo, struct dx_frame *frame_in, int *err)
+ struct dx_hash_info *hinfo, struct dx_frame *frame_in)
{
unsigned count, indirect;
struct dx_entry *at, *entries, *p, *q, *m;
struct dx_root *root;
- struct buffer_head *bh;
struct dx_frame *frame = frame_in;
+ struct dx_frame *ret_err = ERR_PTR(ERR_BAD_DX_DIR);
u32 hash;
- frame->bh = NULL;
- bh = ext4_read_dirblock(dir, 0, INDEX);
- if (IS_ERR(bh)) {
- *err = PTR_ERR(bh);
- goto fail;
- }
- root = (struct dx_root *) bh->b_data;
+ frame->bh = ext4_read_dirblock(dir, 0, INDEX);
+ if (IS_ERR(frame->bh))
+ return (struct dx_frame *) frame->bh;
+
+ root = (struct dx_root *) frame->bh->b_data;
if (root->info.hash_version != DX_HASH_TEA &&
root->info.hash_version != DX_HASH_HALF_MD4 &&
root->info.hash_version != DX_HASH_LEGACY) {
ext4_warning(dir->i_sb, "Unrecognised inode hash code %d",
root->info.hash_version);
- brelse(bh);
- *err = ERR_BAD_DX_DIR;
goto fail;
}
hinfo->hash_version = root->info.hash_version;
if (root->info.unused_flags & 1) {
ext4_warning(dir->i_sb, "Unimplemented inode hash flags: %#06x",
root->info.unused_flags);
- brelse(bh);
- *err = ERR_BAD_DX_DIR;
goto fail;
}
if ((indirect = root->info.indirect_levels) > 1) {
ext4_warning(dir->i_sb, "Unimplemented inode hash depth: %#06x",
root->info.indirect_levels);
- brelse(bh);
- *err = ERR_BAD_DX_DIR;
goto fail;
}
if (dx_get_limit(entries) != dx_root_limit(dir,
root->info.info_length)) {
ext4_warning(dir->i_sb, "dx entry: limit != root limit");
- brelse(bh);
- *err = ERR_BAD_DX_DIR;
goto fail;
}
dxtrace(printk("Look up %x", hash));
- while (1)
- {
+ while (1) {
count = dx_get_count(entries);
if (!count || count > dx_get_limit(entries)) {
ext4_warning(dir->i_sb,
"dx entry: no count or count > limit");
- brelse(bh);
- *err = ERR_BAD_DX_DIR;
- goto fail2;
+ goto fail;
}
p = entries + 1;
q = entries + count - 1;
- while (p <= q)
- {
+ while (p <= q) {
m = p + (q - p)/2;
dxtrace(printk("."));
if (dx_get_hash(m) > hash)
p = m + 1;
}
- if (0) // linear search cross check
- {
+ if (0) { // linear search cross check
unsigned n = count - 1;
at = entries;
while (n--)
at = p - 1;
dxtrace(printk(" %x->%u\n", at == entries? 0: dx_get_hash(at), dx_get_block(at)));
- frame->bh = bh;
frame->entries = entries;
frame->at = at;
- if (!indirect--) return frame;
- bh = ext4_read_dirblock(dir, dx_get_block(at), INDEX);
- if (IS_ERR(bh)) {
- *err = PTR_ERR(bh);
- goto fail2;
+ if (!indirect--)
+ return frame;
+ frame++;
+ frame->bh = ext4_read_dirblock(dir, dx_get_block(at), INDEX);
+ if (IS_ERR(frame->bh)) {
+ ret_err = (struct dx_frame *) frame->bh;
+ frame->bh = NULL;
+ goto fail;
}
- entries = ((struct dx_node *) bh->b_data)->entries;
+ entries = ((struct dx_node *) frame->bh->b_data)->entries;
if (dx_get_limit(entries) != dx_node_limit (dir)) {
ext4_warning(dir->i_sb,
"dx entry: limit != node limit");
- brelse(bh);
- *err = ERR_BAD_DX_DIR;
- goto fail2;
+ goto fail;
}
- frame++;
- frame->bh = NULL;
}
-fail2:
+fail:
while (frame >= frame_in) {
brelse(frame->bh);
frame--;
}
-fail:
- if (*err == ERR_BAD_DX_DIR)
+ if (ret_err == ERR_PTR(ERR_BAD_DX_DIR))
ext4_warning(dir->i_sb,
"Corrupt dir inode %lu, running e2fsck is "
"recommended.", dir->i_ino);
- return NULL;
+ return ret_err;
}
static void dx_release (struct dx_frame *frames)
}
hinfo.hash = start_hash;
hinfo.minor_hash = 0;
- frame = dx_probe(NULL, dir, &hinfo, frames, &err);
- if (!frame)
- return err;
+ frame = dx_probe(NULL, dir, &hinfo, frames);
+ if (IS_ERR(frame))
+ return PTR_ERR(frame);
/* Add '.' and '..' from the htree header */
if (!start_hash && !start_minor_hash) {
buffer */
int num = 0;
ext4_lblk_t nblocks;
- int i, err = 0;
- int namelen;
+ int i, namelen;
*res_dir = NULL;
sb = dir->i_sb;
goto restart;
}
if (is_dx(dir)) {
- bh = ext4_dx_find_entry(dir, d_name, res_dir, &err);
+ bh = ext4_dx_find_entry(dir, d_name, res_dir);
/*
* On success, or if the error was file not found,
* return. Otherwise, fall back to doing a search the
* old fashioned way.
*/
- if (err == -ENOENT)
- return NULL;
- if (err && err != ERR_BAD_DX_DIR)
- return ERR_PTR(err);
- if (bh)
+ if (!IS_ERR(bh) || PTR_ERR(bh) != ERR_BAD_DX_DIR)
return bh;
dxtrace(printk(KERN_DEBUG "ext4_find_entry: dx failed, "
"falling back\n"));
break;
}
num++;
- bh = ext4_getblk(NULL, dir, b++, 0, &err);
- if (unlikely(err)) {
+ bh = ext4_getblk(NULL, dir, b++, 0);
+ if (unlikely(IS_ERR(bh))) {
if (ra_max == 0)
- return ERR_PTR(err);
+ return bh;
break;
}
bh_use[ra_max] = bh;
}
static struct buffer_head * ext4_dx_find_entry(struct inode *dir, const struct qstr *d_name,
- struct ext4_dir_entry_2 **res_dir, int *err)
+ struct ext4_dir_entry_2 **res_dir)
{
struct super_block * sb = dir->i_sb;
struct dx_hash_info hinfo;
ext4_lblk_t block;
int retval;
- if (!(frame = dx_probe(d_name, dir, &hinfo, frames, err)))
- return NULL;
+ frame = dx_probe(d_name, dir, &hinfo, frames);
+ if (IS_ERR(frame))
+ return (struct buffer_head *) frame;
do {
block = dx_get_block(frame->at);
bh = ext4_read_dirblock(dir, block, DIRENT);
- if (IS_ERR(bh)) {
- *err = PTR_ERR(bh);
+ if (IS_ERR(bh))
goto errout;
- }
+
retval = search_dirblock(bh, dir, d_name,
block << EXT4_BLOCK_SIZE_BITS(sb),
res_dir);
- if (retval == 1) { /* Success! */
- dx_release(frames);
- return bh;
- }
+ if (retval == 1)
+ goto success;
brelse(bh);
if (retval == -1) {
- *err = ERR_BAD_DX_DIR;
+ bh = ERR_PTR(ERR_BAD_DX_DIR);
goto errout;
}
frames, NULL);
if (retval < 0) {
ext4_warning(sb,
- "error reading index page in directory #%lu",
- dir->i_ino);
- *err = retval;
+ "error %d reading index page in directory #%lu",
+ retval, dir->i_ino);
+ bh = ERR_PTR(retval);
goto errout;
}
} while (retval == 1);
- *err = -ENOENT;
+ bh = NULL;
errout:
dxtrace(printk(KERN_DEBUG "%s not found\n", d_name->name));
- dx_release (frames);
- return NULL;
+success:
+ dx_release(frames);
+ return bh;
}
static struct dentry *ext4_lookup(struct inode *dir, struct dentry *dentry, unsigned int flags)
dentry);
return ERR_PTR(-EIO);
}
- inode = ext4_iget(dir->i_sb, ino);
+ inode = ext4_iget_normal(dir->i_sb, ino);
if (inode == ERR_PTR(-ESTALE)) {
EXT4_ERROR_INODE(dir,
"deleted inode referenced: %u",
return ERR_PTR(-EIO);
}
- return d_obtain_alias(ext4_iget(child->d_inode->i_sb, ino));
+ return d_obtain_alias(ext4_iget_normal(child->d_inode->i_sb, ino));
}
/*
*/
static struct ext4_dir_entry_2 *do_split(handle_t *handle, struct inode *dir,
struct buffer_head **bh,struct dx_frame *frame,
- struct dx_hash_info *hinfo, int *error)
+ struct dx_hash_info *hinfo)
{
unsigned blocksize = dir->i_sb->s_blocksize;
unsigned count, continued;
int csum_size = 0;
int err = 0, i;
- if (EXT4_HAS_RO_COMPAT_FEATURE(dir->i_sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ if (ext4_has_metadata_csum(dir->i_sb))
csum_size = sizeof(struct ext4_dir_entry_tail);
bh2 = ext4_append(handle, dir, &newblock);
if (IS_ERR(bh2)) {
brelse(*bh);
*bh = NULL;
- *error = PTR_ERR(bh2);
- return NULL;
+ return (struct ext4_dir_entry_2 *) bh2;
}
BUFFER_TRACE(*bh, "get_write_access");
dxtrace(dx_show_leaf (hinfo, (struct ext4_dir_entry_2 *) data2, blocksize, 1));
/* Which block gets the new entry? */
- if (hinfo->hash >= hash2)
- {
+ if (hinfo->hash >= hash2) {
swap(*bh, bh2);
de = de2;
}
brelse(bh2);
*bh = NULL;
ext4_std_error(dir->i_sb, err);
- *error = err;
- return NULL;
+ return ERR_PTR(err);
}
int ext4_find_dest_de(struct inode *dir, struct inode *inode,
int csum_size = 0;
int err;
- if (EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ if (ext4_has_metadata_csum(inode->i_sb))
csum_size = sizeof(struct ext4_dir_entry_tail);
if (!de) {
struct fake_dirent *fde;
int csum_size = 0;
- if (EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ if (ext4_has_metadata_csum(inode->i_sb))
csum_size = sizeof(struct ext4_dir_entry_tail);
blocksize = dir->i_sb->s_blocksize;
hinfo.hash_version += EXT4_SB(dir->i_sb)->s_hash_unsigned;
hinfo.seed = EXT4_SB(dir->i_sb)->s_hash_seed;
ext4fs_dirhash(name, namelen, &hinfo);
+ memset(frames, 0, sizeof(frames));
frame = frames;
frame->entries = entries;
frame->at = entries;
frame->bh = bh;
bh = bh2;
- ext4_handle_dirty_dx_node(handle, dir, frame->bh);
- ext4_handle_dirty_dirent_node(handle, dir, bh);
+ retval = ext4_handle_dirty_dx_node(handle, dir, frame->bh);
+ if (retval)
+ goto out_frames;
+ retval = ext4_handle_dirty_dirent_node(handle, dir, bh);
+ if (retval)
+ goto out_frames;
- de = do_split(handle,dir, &bh, frame, &hinfo, &retval);
- if (!de) {
- /*
- * Even if the block split failed, we have to properly write
- * out all the changes we did so far. Otherwise we can end up
- * with corrupted filesystem.
- */
- ext4_mark_inode_dirty(handle, dir);
- dx_release(frames);
- return retval;
+ de = do_split(handle,dir, &bh, frame, &hinfo);
+ if (IS_ERR(de)) {
+ retval = PTR_ERR(de);
+ goto out_frames;
}
dx_release(frames);
retval = add_dirent_to_buf(handle, dentry, inode, de, bh);
brelse(bh);
return retval;
+out_frames:
+ /*
+ * Even if the block split failed, we have to properly write
+ * out all the changes we did so far. Otherwise we can end up
+ * with corrupted filesystem.
+ */
+ ext4_mark_inode_dirty(handle, dir);
+ dx_release(frames);
+ return retval;
}
/*
ext4_lblk_t block, blocks;
int csum_size = 0;
- if (EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ if (ext4_has_metadata_csum(inode->i_sb))
csum_size = sizeof(struct ext4_dir_entry_tail);
sb = dir->i_sb;
struct ext4_dir_entry_2 *de;
int err;
- frame = dx_probe(&dentry->d_name, dir, &hinfo, frames, &err);
- if (!frame)
- return err;
+ frame = dx_probe(&dentry->d_name, dir, &hinfo, frames);
+ if (IS_ERR(frame))
+ return PTR_ERR(frame);
entries = frame->entries;
at = frame->at;
bh = ext4_read_dirblock(dir, dx_get_block(frame->at), DIRENT);
goto cleanup;
}
}
- de = do_split(handle, dir, &bh, frame, &hinfo, &err);
- if (!de)
+ de = do_split(handle, dir, &bh, frame, &hinfo);
+ if (IS_ERR(de)) {
+ err = PTR_ERR(de);
goto cleanup;
+ }
err = add_dirent_to_buf(handle, dentry, inode, de, bh);
goto cleanup;
return err;
}
- if (EXT4_HAS_RO_COMPAT_FEATURE(dir->i_sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ if (ext4_has_metadata_csum(dir->i_sb))
csum_size = sizeof(struct ext4_dir_entry_tail);
BUFFER_TRACE(bh, "get_write_access");
int csum_size = 0;
int err;
- if (EXT4_HAS_RO_COMPAT_FEATURE(dir->i_sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ if (ext4_has_metadata_csum(dir->i_sb))
csum_size = sizeof(struct ext4_dir_entry_tail);
if (ext4_test_inode_state(inode, EXT4_STATE_MAY_INLINE_DATA)) {
dir_block = ext4_append(handle, inode, &block);
if (IS_ERR(dir_block))
return PTR_ERR(dir_block);
- BUFFER_TRACE(dir_block, "get_write_access");
- err = ext4_journal_get_write_access(handle, dir_block);
- if (err)
- goto out;
de = (struct ext4_dir_entry_2 *)dir_block->b_data;
ext4_init_dot_dotdot(inode, de, blocksize, csum_size, dir->i_ino, 0);
set_nlink(inode, 2);
int err = 0, rc;
bool dirty = false;
- if (!sbi->s_journal)
+ if (!sbi->s_journal || is_bad_inode(inode))
return 0;
WARN_ON_ONCE(!(inode->i_state & (I_NEW | I_FREEING)) &&
}
}
+static struct inode *ext4_whiteout_for_rename(struct ext4_renament *ent,
+ int credits, handle_t **h)
+{
+ struct inode *wh;
+ handle_t *handle;
+ int retries = 0;
+
+ /*
+ * for inode block, sb block, group summaries,
+ * and inode bitmap
+ */
+ credits += (EXT4_MAXQUOTAS_TRANS_BLOCKS(ent->dir->i_sb) +
+ EXT4_XATTR_TRANS_BLOCKS + 4);
+retry:
+ wh = ext4_new_inode_start_handle(ent->dir, S_IFCHR | WHITEOUT_MODE,
+ &ent->dentry->d_name, 0, NULL,
+ EXT4_HT_DIR, credits);
+
+ handle = ext4_journal_current_handle();
+ if (IS_ERR(wh)) {
+ if (handle)
+ ext4_journal_stop(handle);
+ if (PTR_ERR(wh) == -ENOSPC &&
+ ext4_should_retry_alloc(ent->dir->i_sb, &retries))
+ goto retry;
+ } else {
+ *h = handle;
+ init_special_inode(wh, wh->i_mode, WHITEOUT_DEV);
+ wh->i_op = &ext4_special_inode_operations;
+ }
+ return wh;
+}
+
/*
* Anybody can rename anything with this: the permission checks are left to the
* higher-level routines.
* This comes from rename(const char *oldpath, const char *newpath)
*/
static int ext4_rename(struct inode *old_dir, struct dentry *old_dentry,
- struct inode *new_dir, struct dentry *new_dentry)
+ struct inode *new_dir, struct dentry *new_dentry,
+ unsigned int flags)
{
handle_t *handle = NULL;
struct ext4_renament old = {
};
int force_reread;
int retval;
+ struct inode *whiteout = NULL;
+ int credits;
+ u8 old_file_type;
dquot_initialize(old.dir);
dquot_initialize(new.dir);
if (new.inode && !test_opt(new.dir->i_sb, NO_AUTO_DA_ALLOC))
ext4_alloc_da_blocks(old.inode);
- handle = ext4_journal_start(old.dir, EXT4_HT_DIR,
- (2 * EXT4_DATA_TRANS_BLOCKS(old.dir->i_sb) +
- EXT4_INDEX_EXTRA_TRANS_BLOCKS + 2));
- if (IS_ERR(handle))
- return PTR_ERR(handle);
+ credits = (2 * EXT4_DATA_TRANS_BLOCKS(old.dir->i_sb) +
+ EXT4_INDEX_EXTRA_TRANS_BLOCKS + 2);
+ if (!(flags & RENAME_WHITEOUT)) {
+ handle = ext4_journal_start(old.dir, EXT4_HT_DIR, credits);
+ if (IS_ERR(handle))
+ return PTR_ERR(handle);
+ } else {
+ whiteout = ext4_whiteout_for_rename(&old, credits, &handle);
+ if (IS_ERR(whiteout))
+ return PTR_ERR(whiteout);
+ }
if (IS_DIRSYNC(old.dir) || IS_DIRSYNC(new.dir))
ext4_handle_sync(handle);
*/
force_reread = (new.dir->i_ino == old.dir->i_ino &&
ext4_test_inode_flag(new.dir, EXT4_INODE_INLINE_DATA));
+
+ old_file_type = old.de->file_type;
+ if (whiteout) {
+ /*
+ * Do this before adding a new entry, so the old entry is sure
+ * to be still pointing to the valid old entry.
+ */
+ retval = ext4_setent(handle, &old, whiteout->i_ino,
+ EXT4_FT_CHRDEV);
+ if (retval)
+ goto end_rename;
+ ext4_mark_inode_dirty(handle, whiteout);
+ }
if (!new.bh) {
retval = ext4_add_entry(handle, new.dentry, old.inode);
if (retval)
goto end_rename;
} else {
retval = ext4_setent(handle, &new,
- old.inode->i_ino, old.de->file_type);
+ old.inode->i_ino, old_file_type);
if (retval)
goto end_rename;
}
old.inode->i_ctime = ext4_current_time(old.inode);
ext4_mark_inode_dirty(handle, old.inode);
- /*
- * ok, that's it
- */
- ext4_rename_delete(handle, &old, force_reread);
+ if (!whiteout) {
+ /*
+ * ok, that's it
+ */
+ ext4_rename_delete(handle, &old, force_reread);
+ }
if (new.inode) {
ext4_dec_count(handle, new.inode);
brelse(old.dir_bh);
brelse(old.bh);
brelse(new.bh);
+ if (whiteout) {
+ if (retval)
+ drop_nlink(whiteout);
+ unlock_new_inode(whiteout);
+ iput(whiteout);
+ }
if (handle)
ext4_journal_stop(handle);
return retval;
struct inode *new_dir, struct dentry *new_dentry,
unsigned int flags)
{
- if (flags & ~(RENAME_NOREPLACE | RENAME_EXCHANGE))
+ if (flags & ~(RENAME_NOREPLACE | RENAME_EXCHANGE | RENAME_WHITEOUT))
return -EINVAL;
if (flags & RENAME_EXCHANGE) {
return ext4_cross_rename(old_dir, old_dentry,
new_dir, new_dentry);
}
- /*
- * Existence checking was done by the VFS, otherwise "RENAME_NOREPLACE"
- * is equivalent to regular rename.
- */
- return ext4_rename(old_dir, old_dentry, new_dir, new_dentry);
+
+ return ext4_rename(old_dir, old_dentry, new_dir, new_dentry, flags);
}
/*
break;
if (meta_bg == 0)
- backup_block = group * bpg + blk_off;
+ backup_block = ((ext4_fsblk_t)group) * bpg + blk_off;
else
backup_block = (ext4_group_first_block_no(sb, group) +
ext4_bg_has_super(sb, group));
{
struct buffer_head *bh;
- if (!EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ if (!ext4_has_metadata_csum(sb))
return 0;
bh = ext4_get_bitmap(sb, group_data->inode_bitmap);
static void ext4_clear_journal_err(struct super_block *sb,
struct ext4_super_block *es);
static int ext4_sync_fs(struct super_block *sb, int wait);
-static int ext4_sync_fs_nojournal(struct super_block *sb, int wait);
static int ext4_remount(struct super_block *sb, int *flags, char *data);
static int ext4_statfs(struct dentry *dentry, struct kstatfs *buf);
static int ext4_unfreeze(struct super_block *sb);
static int ext4_superblock_csum_verify(struct super_block *sb,
struct ext4_super_block *es)
{
- if (!EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ if (!ext4_has_metadata_csum(sb))
return 1;
return es->s_checksum == ext4_superblock_csum(sb, es);
{
struct ext4_super_block *es = EXT4_SB(sb)->s_es;
- if (!EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ if (!ext4_has_metadata_csum(sb))
return;
es->s_checksum = ext4_superblock_csum(sb, es);
percpu_counter_destroy(&sbi->s_freeinodes_counter);
percpu_counter_destroy(&sbi->s_dirs_counter);
percpu_counter_destroy(&sbi->s_dirtyclusters_counter);
- percpu_counter_destroy(&sbi->s_extent_cache_cnt);
brelse(sbi->s_sbh);
#ifdef CONFIG_QUOTA
- for (i = 0; i < MAXQUOTAS; i++)
+ for (i = 0; i < EXT4_MAXQUOTAS; i++)
kfree(sbi->s_qf_names[i]);
#endif
ext4_es_init_tree(&ei->i_es_tree);
rwlock_init(&ei->i_es_lock);
INIT_LIST_HEAD(&ei->i_es_lru);
+ ei->i_es_all_nr = 0;
ei->i_es_lru_nr = 0;
ei->i_touch_when = 0;
ei->i_reserved_data_blocks = 0;
* Currently we don't know the generation for parent directory, so
* a generation of 0 means "accept any"
*/
- inode = ext4_iget(sb, ino);
+ inode = ext4_iget_normal(sb, ino);
if (IS_ERR(inode))
return ERR_CAST(inode);
if (generation && inode->i_generation != generation) {
.bdev_try_to_free_page = bdev_try_to_free_page,
};
-static const struct super_operations ext4_nojournal_sops = {
- .alloc_inode = ext4_alloc_inode,
- .destroy_inode = ext4_destroy_inode,
- .write_inode = ext4_write_inode,
- .dirty_inode = ext4_dirty_inode,
- .drop_inode = ext4_drop_inode,
- .evict_inode = ext4_evict_inode,
- .sync_fs = ext4_sync_fs_nojournal,
- .put_super = ext4_put_super,
- .statfs = ext4_statfs,
- .remount_fs = ext4_remount,
- .show_options = ext4_show_options,
-#ifdef CONFIG_QUOTA
- .quota_read = ext4_quota_read,
- .quota_write = ext4_quota_write,
-#endif
- .bdev_try_to_free_page = bdev_try_to_free_page,
-};
-
static const struct export_operations ext4_export_ops = {
.fh_to_dentry = ext4_fh_to_dentry,
.fh_to_parent = ext4_fh_to_parent,
"not specified");
return 0;
}
- } else {
- if (sbi->s_jquota_fmt) {
- ext4_msg(sb, KERN_ERR, "journaled quota format "
- "specified with no journaling "
- "enabled");
- return 0;
- }
}
#endif
if (test_opt(sb, DIOREAD_NOLOCK)) {
__u16 crc = 0;
__le32 le_group = cpu_to_le32(block_group);
- if ((sbi->s_es->s_feature_ro_compat &
- cpu_to_le32(EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))) {
+ if (ext4_has_metadata_csum(sbi->s_sb)) {
/* Use new metadata_csum algorithm */
__le16 save_csum;
__u32 csum32;
}
/* old crc16 code */
+ if (!(sbi->s_es->s_feature_ro_compat &
+ cpu_to_le32(EXT4_FEATURE_RO_COMPAT_GDT_CSUM)))
+ return 0;
+
offset = offsetof(struct ext4_group_desc, bg_checksum);
crc = crc16(~0, sbi->s_es->s_uuid, sizeof(sbi->s_es->s_uuid));
if (EXT4_SB(sb)->s_mount_state & EXT4_ERROR_FS) {
/* don't clear list on RO mount w/ errors */
if (es->s_last_orphan && !(s_flags & MS_RDONLY)) {
- jbd_debug(1, "Errors on filesystem, "
+ ext4_msg(sb, KERN_INFO, "Errors on filesystem, "
"clearing orphan list.\n");
es->s_last_orphan = 0;
}
/* Needed for iput() to work correctly and not trash data */
sb->s_flags |= MS_ACTIVE;
/* Turn on quotas so that they are updated correctly */
- for (i = 0; i < MAXQUOTAS; i++) {
+ for (i = 0; i < EXT4_MAXQUOTAS; i++) {
if (EXT4_SB(sb)->s_qf_names[i]) {
int ret = ext4_quota_on_mount(sb, i);
if (ret < 0)
PLURAL(nr_truncates));
#ifdef CONFIG_QUOTA
/* Turn quotas off */
- for (i = 0; i < MAXQUOTAS; i++) {
+ for (i = 0; i < EXT4_MAXQUOTAS; i++) {
if (sb_dqopt(sb)->files[i])
dquot_quota_off(sb, i);
}
return count;
}
+static ssize_t es_ui_show(struct ext4_attr *a,
+ struct ext4_sb_info *sbi, char *buf)
+{
+
+ unsigned int *ui = (unsigned int *) (((char *) sbi->s_es) +
+ a->u.offset);
+
+ return snprintf(buf, PAGE_SIZE, "%u\n", *ui);
+}
+
static ssize_t reserved_clusters_show(struct ext4_attr *a,
struct ext4_sb_info *sbi, char *buf)
{
.offset = offsetof(struct ext4_sb_info, _elname),\
}, \
}
+
+#define EXT4_ATTR_OFFSET_ES(_name,_mode,_show,_store,_elname) \
+static struct ext4_attr ext4_attr_##_name = { \
+ .attr = {.name = __stringify(_name), .mode = _mode }, \
+ .show = _show, \
+ .store = _store, \
+ .u = { \
+ .offset = offsetof(struct ext4_super_block, _elname), \
+ }, \
+}
+
#define EXT4_ATTR(name, mode, show, store) \
static struct ext4_attr ext4_attr_##name = __ATTR(name, mode, show, store)
#define EXT4_INFO_ATTR(name) EXT4_ATTR(name, 0444, NULL, NULL)
#define EXT4_RO_ATTR(name) EXT4_ATTR(name, 0444, name##_show, NULL)
#define EXT4_RW_ATTR(name) EXT4_ATTR(name, 0644, name##_show, name##_store)
+
+#define EXT4_RO_ATTR_ES_UI(name, elname) \
+ EXT4_ATTR_OFFSET_ES(name, 0444, es_ui_show, NULL, elname)
#define EXT4_RW_ATTR_SBI_UI(name, elname) \
EXT4_ATTR_OFFSET(name, 0644, sbi_ui_show, sbi_ui_store, elname)
+
#define ATTR_LIST(name) &ext4_attr_##name.attr
#define EXT4_DEPRECATED_ATTR(_name, _val) \
static struct ext4_attr ext4_attr_##_name = { \
EXT4_RW_ATTR_SBI_UI(warning_ratelimit_burst, s_warning_ratelimit_state.burst);
EXT4_RW_ATTR_SBI_UI(msg_ratelimit_interval_ms, s_msg_ratelimit_state.interval);
EXT4_RW_ATTR_SBI_UI(msg_ratelimit_burst, s_msg_ratelimit_state.burst);
+EXT4_RO_ATTR_ES_UI(errors_count, s_error_count);
+EXT4_RO_ATTR_ES_UI(first_error_time, s_first_error_time);
+EXT4_RO_ATTR_ES_UI(last_error_time, s_last_error_time);
static struct attribute *ext4_attrs[] = {
ATTR_LIST(delayed_allocation_blocks),
ATTR_LIST(warning_ratelimit_burst),
ATTR_LIST(msg_ratelimit_interval_ms),
ATTR_LIST(msg_ratelimit_burst),
+ ATTR_LIST(errors_count),
+ ATTR_LIST(first_error_time),
+ ATTR_LIST(last_error_time),
NULL,
};
complete(&ext4_feat->f_kobj_unregister);
}
+static ssize_t ext4_feat_show(struct kobject *kobj,
+ struct attribute *attr, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "supported\n");
+}
+
+/*
+ * We can not use ext4_attr_show/store because it relies on the kobject
+ * being embedded in the ext4_sb_info structure which is definitely not
+ * true in this case.
+ */
+static const struct sysfs_ops ext4_feat_ops = {
+ .show = ext4_feat_show,
+ .store = NULL,
+};
+
static struct kobj_type ext4_feat_ktype = {
.default_attrs = ext4_feat_attrs,
- .sysfs_ops = &ext4_attr_ops,
+ .sysfs_ops = &ext4_feat_ops,
.release = ext4_feat_release,
};
int compat, incompat;
struct ext4_sb_info *sbi = EXT4_SB(sb);
- if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM)) {
+ if (ext4_has_metadata_csum(sb)) {
/* journal checksum v3 */
compat = 0;
incompat = JBD2_FEATURE_INCOMPAT_CSUM_V3;
incompat = 0;
}
+ jbd2_journal_clear_features(sbi->s_journal,
+ JBD2_FEATURE_COMPAT_CHECKSUM, 0,
+ JBD2_FEATURE_INCOMPAT_CSUM_V3 |
+ JBD2_FEATURE_INCOMPAT_CSUM_V2);
if (test_opt(sb, JOURNAL_ASYNC_COMMIT)) {
ret = jbd2_journal_set_features(sbi->s_journal,
compat, 0,
jbd2_journal_clear_features(sbi->s_journal, 0, 0,
JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT);
} else {
- jbd2_journal_clear_features(sbi->s_journal,
- JBD2_FEATURE_COMPAT_CHECKSUM, 0,
- JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT |
- JBD2_FEATURE_INCOMPAT_CSUM_V3 |
- JBD2_FEATURE_INCOMPAT_CSUM_V2);
+ jbd2_journal_clear_features(sbi->s_journal, 0, 0,
+ JBD2_FEATURE_INCOMPAT_ASYNC_COMMIT);
}
return ret;
logical_sb_block = sb_block;
}
- if (!(bh = sb_bread(sb, logical_sb_block))) {
+ if (!(bh = sb_bread_unmovable(sb, logical_sb_block))) {
ext4_msg(sb, KERN_ERR, "unable to read superblock");
goto out_fail;
}
}
/* Precompute checksum seed for all metadata */
- if (EXT4_HAS_RO_COMPAT_FEATURE(sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ if (ext4_has_metadata_csum(sb))
sbi->s_csum_seed = ext4_chksum(sbi, ~0, es->s_uuid,
sizeof(es->s_uuid));
#ifdef CONFIG_EXT4_FS_POSIX_ACL
set_opt(sb, POSIX_ACL);
#endif
+ /* don't forget to enable journal_csum when metadata_csum is enabled. */
+ if (ext4_has_metadata_csum(sb))
+ set_opt(sb, JOURNAL_CHECKSUM);
+
if ((def_mount_opts & EXT4_DEFM_JMODE) == EXT4_DEFM_JMODE_DATA)
set_opt(sb, JOURNAL_DATA);
else if ((def_mount_opts & EXT4_DEFM_JMODE) == EXT4_DEFM_JMODE_ORDERED)
set_opt(sb, ERRORS_CONT);
else
set_opt(sb, ERRORS_RO);
- if (def_mount_opts & EXT4_DEFM_BLOCK_VALIDITY)
- set_opt(sb, BLOCK_VALIDITY);
+ /* block_validity enabled by default; disable with noblock_validity */
+ set_opt(sb, BLOCK_VALIDITY);
if (def_mount_opts & EXT4_DEFM_DISCARD)
set_opt(sb, DISCARD);
brelse(bh);
logical_sb_block = sb_block * EXT4_MIN_BLOCK_SIZE;
offset = do_div(logical_sb_block, blocksize);
- bh = sb_bread(sb, logical_sb_block);
+ bh = sb_bread_unmovable(sb, logical_sb_block);
if (!bh) {
ext4_msg(sb, KERN_ERR,
"Can't read superblock on 2nd try");
for (i = 0; i < db_count; i++) {
block = descriptor_loc(sb, logical_sb_block, i);
- sbi->s_group_desc[i] = sb_bread(sb, block);
+ sbi->s_group_desc[i] = sb_bread_unmovable(sb, block);
if (!sbi->s_group_desc[i]) {
ext4_msg(sb, KERN_ERR,
"can't read group descriptor %d", i);
sbi->s_err_report.data = (unsigned long) sb;
/* Register extent status tree shrinker */
- ext4_es_register_shrinker(sbi);
-
- err = percpu_counter_init(&sbi->s_extent_cache_cnt, 0, GFP_KERNEL);
- if (err) {
- ext4_msg(sb, KERN_ERR, "insufficient memory");
+ if (ext4_es_register_shrinker(sbi))
goto failed_mount3;
- }
sbi->s_stripe = ext4_get_stripe_size(sbi);
sbi->s_extent_max_zeroout_kb = 32;
/*
* set up enough so that it can read an inode
*/
- if (!test_opt(sb, NOLOAD) &&
- EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL))
- sb->s_op = &ext4_sops;
- else
- sb->s_op = &ext4_nojournal_sops;
+ sb->s_op = &ext4_sops;
sb->s_export_op = &ext4_export_ops;
sb->s_xattr = ext4_xattr_handlers;
#ifdef CONFIG_QUOTA
if (EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_MMP) &&
!(sb->s_flags & MS_RDONLY))
if (ext4_multi_mount_protect(sb, le64_to_cpu(es->s_mmp_block)))
- goto failed_mount3;
+ goto failed_mount3a;
/*
* The first inode we look at is the journal inode. Don't try
if (!test_opt(sb, NOLOAD) &&
EXT4_HAS_COMPAT_FEATURE(sb, EXT4_FEATURE_COMPAT_HAS_JOURNAL)) {
if (ext4_load_journal(sb, es, journal_devnum))
- goto failed_mount3;
+ goto failed_mount3a;
} else if (test_opt(sb, NOLOAD) && !(sb->s_flags & MS_RDONLY) &&
EXT4_HAS_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER)) {
ext4_msg(sb, KERN_ERR, "required journal recovery "
jbd2_journal_destroy(sbi->s_journal);
sbi->s_journal = NULL;
}
-failed_mount3:
+failed_mount3a:
ext4_es_unregister_shrinker(sbi);
+failed_mount3:
del_timer_sync(&sbi->s_err_report);
- percpu_counter_destroy(&sbi->s_extent_cache_cnt);
if (sbi->s_mmp_tsk)
kthread_stop(sbi->s_mmp_tsk);
failed_mount2:
remove_proc_entry(sb->s_id, ext4_proc_root);
}
#ifdef CONFIG_QUOTA
- for (i = 0; i < MAXQUOTAS; i++)
+ for (i = 0; i < EXT4_MAXQUOTAS; i++)
kfree(sbi->s_qf_names[i]);
#endif
ext4_blkdev_remove(sbi);
goto out_bdev;
}
+ if ((le32_to_cpu(es->s_feature_ro_compat) &
+ EXT4_FEATURE_RO_COMPAT_METADATA_CSUM) &&
+ es->s_checksum != ext4_superblock_csum(sb, es)) {
+ ext4_msg(sb, KERN_ERR, "external journal has "
+ "corrupt superblock");
+ brelse(bh);
+ goto out_bdev;
+ }
+
if (memcmp(EXT4_SB(sb)->s_es->s_journal_uuid, es->s_uuid, 16)) {
ext4_msg(sb, KERN_ERR, "journal UUID does not match");
brelse(bh);
* being sent at the end of the function. But we can skip it if
* transaction_commit will do it for us.
*/
- target = jbd2_get_latest_transaction(sbi->s_journal);
- if (wait && sbi->s_journal->j_flags & JBD2_BARRIER &&
- !jbd2_trans_will_send_data_barrier(sbi->s_journal, target))
+ if (sbi->s_journal) {
+ target = jbd2_get_latest_transaction(sbi->s_journal);
+ if (wait && sbi->s_journal->j_flags & JBD2_BARRIER &&
+ !jbd2_trans_will_send_data_barrier(sbi->s_journal, target))
+ needs_barrier = true;
+
+ if (jbd2_journal_start_commit(sbi->s_journal, &target)) {
+ if (wait)
+ ret = jbd2_log_wait_commit(sbi->s_journal,
+ target);
+ }
+ } else if (wait && test_opt(sb, BARRIER))
needs_barrier = true;
-
- if (jbd2_journal_start_commit(sbi->s_journal, &target)) {
- if (wait)
- ret = jbd2_log_wait_commit(sbi->s_journal, target);
- }
if (needs_barrier) {
int err;
err = blkdev_issue_flush(sb->s_bdev, GFP_KERNEL, NULL);
return ret;
}
-static int ext4_sync_fs_nojournal(struct super_block *sb, int wait)
-{
- int ret = 0;
-
- trace_ext4_sync_fs(sb, wait);
- flush_workqueue(EXT4_SB(sb)->rsv_conversion_wq);
- dquot_writeback_dquots(sb, -1);
- if (wait && test_opt(sb, BARRIER))
- ret = blkdev_issue_flush(sb->s_bdev, GFP_KERNEL, NULL);
-
- return ret;
-}
-
/*
* LVM calls this function before a (read-only) snapshot is created. This
* gives us a chance to flush the journal completely and mark the fs clean.
journal = EXT4_SB(sb)->s_journal;
- /* Now we set up the journal barrier. */
- jbd2_journal_lock_updates(journal);
+ if (journal) {
+ /* Now we set up the journal barrier. */
+ jbd2_journal_lock_updates(journal);
- /*
- * Don't clear the needs_recovery flag if we failed to flush
- * the journal.
- */
- error = jbd2_journal_flush(journal);
- if (error < 0)
- goto out;
+ /*
+ * Don't clear the needs_recovery flag if we failed to
+ * flush the journal.
+ */
+ error = jbd2_journal_flush(journal);
+ if (error < 0)
+ goto out;
+ }
/* Journal blocked and flushed, clear needs_recovery flag. */
EXT4_CLEAR_INCOMPAT_FEATURE(sb, EXT4_FEATURE_INCOMPAT_RECOVER);
error = ext4_commit_super(sb, 1);
out:
- /* we rely on upper layer to stop further updates */
- jbd2_journal_unlock_updates(EXT4_SB(sb)->s_journal);
+ if (journal)
+ /* we rely on upper layer to stop further updates */
+ jbd2_journal_unlock_updates(journal);
return error;
}
u32 s_min_batch_time, s_max_batch_time;
#ifdef CONFIG_QUOTA
int s_jquota_fmt;
- char *s_qf_names[MAXQUOTAS];
+ char *s_qf_names[EXT4_MAXQUOTAS];
#endif
};
old_opts.s_max_batch_time = sbi->s_max_batch_time;
#ifdef CONFIG_QUOTA
old_opts.s_jquota_fmt = sbi->s_jquota_fmt;
- for (i = 0; i < MAXQUOTAS; i++)
+ for (i = 0; i < EXT4_MAXQUOTAS; i++)
if (sbi->s_qf_names[i]) {
old_opts.s_qf_names[i] = kstrdup(sbi->s_qf_names[i],
GFP_KERNEL);
goto restore_opts;
}
+ if ((old_opts.s_mount_opt & EXT4_MOUNT_JOURNAL_CHECKSUM) ^
+ test_opt(sb, JOURNAL_CHECKSUM)) {
+ ext4_msg(sb, KERN_ERR, "changing journal_checksum "
+ "during remount not supported");
+ err = -EINVAL;
+ goto restore_opts;
+ }
+
if (test_opt(sb, DATA_FLAGS) == EXT4_MOUNT_JOURNAL_DATA) {
if (test_opt2(sb, EXPLICIT_DELALLOC)) {
ext4_msg(sb, KERN_ERR, "can't mount with "
#ifdef CONFIG_QUOTA
/* Release old quota file names */
- for (i = 0; i < MAXQUOTAS; i++)
+ for (i = 0; i < EXT4_MAXQUOTAS; i++)
kfree(old_opts.s_qf_names[i]);
if (enable_quota) {
if (sb_any_quota_suspended(sb))
sbi->s_max_batch_time = old_opts.s_max_batch_time;
#ifdef CONFIG_QUOTA
sbi->s_jquota_fmt = old_opts.s_jquota_fmt;
- for (i = 0; i < MAXQUOTAS; i++) {
+ for (i = 0; i < EXT4_MAXQUOTAS; i++) {
kfree(sbi->s_qf_names[i]);
sbi->s_qf_names[i] = old_opts.s_qf_names[i];
}
{
int err;
struct inode *qf_inode;
- unsigned long qf_inums[MAXQUOTAS] = {
+ unsigned long qf_inums[EXT4_MAXQUOTAS] = {
le32_to_cpu(EXT4_SB(sb)->s_es->s_usr_quota_inum),
le32_to_cpu(EXT4_SB(sb)->s_es->s_grp_quota_inum)
};
static int ext4_enable_quotas(struct super_block *sb)
{
int type, err = 0;
- unsigned long qf_inums[MAXQUOTAS] = {
+ unsigned long qf_inums[EXT4_MAXQUOTAS] = {
le32_to_cpu(EXT4_SB(sb)->s_es->s_usr_quota_inum),
le32_to_cpu(EXT4_SB(sb)->s_es->s_grp_quota_inum)
};
sb_dqopt(sb)->flags |= DQUOT_QUOTA_SYS_FILE;
- for (type = 0; type < MAXQUOTAS; type++) {
+ for (type = 0; type < EXT4_MAXQUOTAS; type++) {
if (qf_inums[type]) {
err = ext4_quota_enable(sb, type, QFMT_VFS_V1,
DQUOT_USAGE_ENABLED);
{
struct inode *inode = sb_dqopt(sb)->files[type];
ext4_lblk_t blk = off >> EXT4_BLOCK_SIZE_BITS(sb);
- int err = 0;
int offset = off & (sb->s_blocksize - 1);
int tocopy;
size_t toread;
while (toread > 0) {
tocopy = sb->s_blocksize - offset < toread ?
sb->s_blocksize - offset : toread;
- bh = ext4_bread(NULL, inode, blk, 0, &err);
- if (err)
- return err;
+ bh = ext4_bread(NULL, inode, blk, 0);
+ if (IS_ERR(bh))
+ return PTR_ERR(bh);
if (!bh) /* A hole? */
memset(data, 0, tocopy);
else
{
struct inode *inode = sb_dqopt(sb)->files[type];
ext4_lblk_t blk = off >> EXT4_BLOCK_SIZE_BITS(sb);
- int err = 0;
- int offset = off & (sb->s_blocksize - 1);
+ int err, offset = off & (sb->s_blocksize - 1);
struct buffer_head *bh;
handle_t *handle = journal_current_handle();
return -EIO;
}
- bh = ext4_bread(handle, inode, blk, 1, &err);
+ bh = ext4_bread(handle, inode, blk, 1);
+ if (IS_ERR(bh))
+ return PTR_ERR(bh);
if (!bh)
goto out;
BUFFER_TRACE(bh, "get write access");
err = ext4_journal_get_write_access(handle, bh);
if (err) {
brelse(bh);
- goto out;
+ return err;
}
lock_buffer(bh);
memcpy(bh->b_data+offset, data, len);
err = ext4_handle_dirty_metadata(handle, NULL, bh);
brelse(bh);
out:
- if (err)
- return err;
if (inode->i_size < off + len) {
i_size_write(inode, off + len);
EXT4_I(inode)->i_disksize = inode->i_size;
sector_t block_nr,
struct ext4_xattr_header *hdr)
{
- if (EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM) &&
+ if (ext4_has_metadata_csum(inode->i_sb) &&
(hdr->h_checksum != ext4_xattr_block_csum(inode, block_nr, hdr)))
return 0;
return 1;
sector_t block_nr,
struct ext4_xattr_header *hdr)
{
- if (!EXT4_HAS_RO_COMPAT_FEATURE(inode->i_sb,
- EXT4_FEATURE_RO_COMPAT_METADATA_CSUM))
+ if (!ext4_has_metadata_csum(inode->i_sb))
return;
hdr->h_checksum = ext4_xattr_block_csum(inode, block_nr, hdr);
}
static int
-ext4_xattr_check_names(struct ext4_xattr_entry *entry, void *end)
+ext4_xattr_check_names(struct ext4_xattr_entry *entry, void *end,
+ void *value_start)
{
- while (!IS_LAST_ENTRY(entry)) {
- struct ext4_xattr_entry *next = EXT4_XATTR_NEXT(entry);
+ struct ext4_xattr_entry *e = entry;
+
+ while (!IS_LAST_ENTRY(e)) {
+ struct ext4_xattr_entry *next = EXT4_XATTR_NEXT(e);
if ((void *)next >= end)
return -EIO;
- entry = next;
+ e = next;
}
+
+ while (!IS_LAST_ENTRY(entry)) {
+ if (entry->e_value_size != 0 &&
+ (value_start + le16_to_cpu(entry->e_value_offs) <
+ (void *)e + sizeof(__u32) ||
+ value_start + le16_to_cpu(entry->e_value_offs) +
+ le32_to_cpu(entry->e_value_size) > end))
+ return -EIO;
+ entry = EXT4_XATTR_NEXT(entry);
+ }
+
return 0;
}
return -EIO;
if (!ext4_xattr_block_csum_verify(inode, bh->b_blocknr, BHDR(bh)))
return -EIO;
- error = ext4_xattr_check_names(BFIRST(bh), bh->b_data + bh->b_size);
+ error = ext4_xattr_check_names(BFIRST(bh), bh->b_data + bh->b_size,
+ bh->b_data);
if (!error)
set_buffer_verified(bh);
return error;
header = IHDR(inode, raw_inode);
entry = IFIRST(header);
end = (void *)raw_inode + EXT4_SB(inode->i_sb)->s_inode_size;
- error = ext4_xattr_check_names(entry, end);
+ error = ext4_xattr_check_names(entry, end, entry);
if (error)
goto cleanup;
error = ext4_xattr_find_entry(&entry, name_index, name,
raw_inode = ext4_raw_inode(&iloc);
header = IHDR(inode, raw_inode);
end = (void *)raw_inode + EXT4_SB(inode->i_sb)->s_inode_size;
- error = ext4_xattr_check_names(IFIRST(header), end);
+ error = ext4_xattr_check_names(IFIRST(header), end, IFIRST(header));
if (error)
goto cleanup;
error = ext4_xattr_list_entries(dentry, IFIRST(header),
if (!(ext4_test_inode_flag(inode, EXT4_INODE_EXTENTS)))
goal = goal & EXT4_MAX_BLOCK_FILE_PHYS;
- /*
- * take i_data_sem because we will test
- * i_delalloc_reserved_flag in ext4_mb_new_blocks
- */
- down_read(&EXT4_I(inode)->i_data_sem);
block = ext4_new_meta_blocks(handle, inode, goal, 0,
NULL, &error);
- up_read((&EXT4_I(inode)->i_data_sem));
if (error)
goto cleanup;
is->s.here = is->s.first;
is->s.end = (void *)raw_inode + EXT4_SB(inode->i_sb)->s_inode_size;
if (ext4_test_inode_state(inode, EXT4_STATE_XATTR)) {
- error = ext4_xattr_check_names(IFIRST(header), is->s.end);
+ error = ext4_xattr_check_names(IFIRST(header), is->s.end,
+ IFIRST(header));
if (error)
return error;
/* Find the named attribute. */
}
alias = d_find_alias(inode);
- if (alias && !vfat_d_anon_disconn(alias)) {
+ /*
+ * Checking "alias->d_parent == dentry->d_parent" to make sure
+ * FS is not corrupted (especially double linked dir).
+ */
+ if (alias && alias->d_parent == dentry->d_parent &&
+ !vfat_d_anon_disconn(alias)) {
/*
* This inode has non anonymous-DCACHE_DISCONNECTED
* dentry. This means, the user did ->lookup() by an
out:
mutex_unlock(&MSDOS_SB(sb)->s_lock);
- dentry->d_time = dentry->d_parent->d_inode->i_version;
- dentry = d_splice_alias(inode, dentry);
- if (dentry)
- dentry->d_time = dentry->d_parent->d_inode->i_version;
- return dentry;
-
+ if (!inode)
+ dentry->d_time = dir->i_version;
+ return d_splice_alias(inode, dentry);
error:
mutex_unlock(&MSDOS_SB(sb)->s_lock);
return ERR_PTR(err);
inode->i_mtime = inode->i_atime = inode->i_ctime = ts;
/* timestamp is already written, so mark_inode_dirty() is unneeded. */
- dentry->d_time = dentry->d_parent->d_inode->i_version;
d_instantiate(dentry, inode);
out:
mutex_unlock(&MSDOS_SB(sb)->s_lock);
clear_nlink(inode);
inode->i_mtime = inode->i_atime = CURRENT_TIME_SEC;
fat_detach(inode);
+ dentry->d_time = dir->i_version;
out:
mutex_unlock(&MSDOS_SB(sb)->s_lock);
clear_nlink(inode);
inode->i_mtime = inode->i_atime = CURRENT_TIME_SEC;
fat_detach(inode);
+ dentry->d_time = dir->i_version;
out:
mutex_unlock(&MSDOS_SB(sb)->s_lock);
inode->i_mtime = inode->i_atime = inode->i_ctime = ts;
/* timestamp is already written, so mark_inode_dirty() is unneeded. */
- dentry->d_time = dentry->d_parent->d_inode->i_version;
d_instantiate(dentry, inode);
mutex_unlock(&MSDOS_SB(sb)->s_lock);
/*
* namei.c
*/
-extern int __inode_permission(struct inode *, int);
extern int user_path_mountpoint_at(int, const char __user *, unsigned int, struct path *);
extern int vfs_path_lookup(struct dentry *, struct vfsmount *,
const char *, unsigned int, struct path *);
*/
extern int rw_verify_area(int, struct file *, const loff_t *, size_t);
-/*
- * splice.c
- */
-extern long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
- loff_t *opos, size_t len, unsigned int flags);
-
/*
* pipe.c
*/
#define BEQUIET
static int isofs_hashi(const struct dentry *parent, struct qstr *qstr);
-static int isofs_hash(const struct dentry *parent, struct qstr *qstr);
static int isofs_dentry_cmpi(const struct dentry *parent,
const struct dentry *dentry,
unsigned int len, const char *str, const struct qstr *name);
-static int isofs_dentry_cmp(const struct dentry *parent,
- const struct dentry *dentry,
- unsigned int len, const char *str, const struct qstr *name);
#ifdef CONFIG_JOLIET
static int isofs_hashi_ms(const struct dentry *parent, struct qstr *qstr);
static const struct dentry_operations isofs_dentry_ops[] = {
- {
- .d_hash = isofs_hash,
- .d_compare = isofs_dentry_cmp,
- },
{
.d_hash = isofs_hashi,
.d_compare = isofs_dentry_cmpi,
s32 sbsector;
};
-/*
- * Compute the hash for the isofs name corresponding to the dentry.
- */
-static int
-isofs_hash_common(struct qstr *qstr, int ms)
-{
- const char *name;
- int len;
-
- len = qstr->len;
- name = qstr->name;
- if (ms) {
- while (len && name[len-1] == '.')
- len--;
- }
-
- qstr->hash = full_name_hash(name, len);
-
- return 0;
-}
-
/*
* Compute the hash for the isofs name corresponding to the dentry.
*/
return 1;
}
-static int
-isofs_hash(const struct dentry *dentry, struct qstr *qstr)
-{
- return isofs_hash_common(qstr, 0);
-}
-
static int
isofs_hashi(const struct dentry *dentry, struct qstr *qstr)
{
}
static int
-isofs_dentry_cmp(const struct dentry *parent, const struct dentry *dentry,
+isofs_dentry_cmpi(const struct dentry *parent, const struct dentry *dentry,
unsigned int len, const char *str, const struct qstr *name)
{
- return isofs_dentry_cmp_common(len, str, name, 0, 0);
+ return isofs_dentry_cmp_common(len, str, name, 0, 1);
}
+#ifdef CONFIG_JOLIET
+/*
+ * Compute the hash for the isofs name corresponding to the dentry.
+ */
static int
-isofs_dentry_cmpi(const struct dentry *parent, const struct dentry *dentry,
- unsigned int len, const char *str, const struct qstr *name)
+isofs_hash_common(struct qstr *qstr, int ms)
{
- return isofs_dentry_cmp_common(len, str, name, 0, 1);
+ const char *name;
+ int len;
+
+ len = qstr->len;
+ name = qstr->name;
+ if (ms) {
+ while (len && name[len-1] == '.')
+ len--;
+ }
+
+ qstr->hash = full_name_hash(name, len);
+
+ return 0;
}
-#ifdef CONFIG_JOLIET
static int
isofs_hash_ms(const struct dentry *dentry, struct qstr *qstr)
{
if (opt.check == 'r')
table++;
- s->s_d_op = &isofs_dentry_ops[table];
+ if (table)
+ s->s_d_op = &isofs_dentry_ops[table - 1];
/* get the root dentry */
s->s_root = d_make_root(inode);
isofs_cmp(struct dentry *dentry, const char *compare, int dlen)
{
struct qstr qstr;
-
- if (!compare)
- return 1;
-
- /* check special "." and ".." files */
- if (dlen == 1) {
- /* "." */
- if (compare[0] == 0) {
- if (!dentry->d_name.len)
- return 0;
- compare = ".";
- } else if (compare[0] == 1) {
- compare = "..";
- dlen = 2;
- }
- }
-
qstr.name = compare;
qstr.len = dlen;
+ if (likely(!dentry->d_op))
+ return dentry->d_name.len != dlen || memcmp(dentry->d_name.name, compare, dlen);
return dentry->d_op->d_compare(NULL, NULL, dentry->d_name.len, dentry->d_name.name, &qstr);
}
(!(de->flags[-sbi->s_high_sierra] & 1))) &&
(sbi->s_showassoc ||
(!(de->flags[-sbi->s_high_sierra] & 4)))) {
- match = (isofs_cmp(dentry, dpnt, dlen) == 0);
+ if (dpnt && (dlen > 1 || dpnt[0] > 1))
+ match = (isofs_cmp(dentry, dpnt, dlen) == 0);
}
if (match) {
isofs_normalize_block_and_offset(de,
goto out_err;
}
- bh = __getblk(journal->j_dev, blocknr, journal->j_blocksize);
+ bh = getblk_unmovable(journal->j_dev, blocknr, journal->j_blocksize);
if (!bh) {
printk(KERN_ERR
"%s: Cannot get buffer for journal superblock\n",
#include <linux/bio.h>
#endif
#include <linux/log2.h>
+#include <linux/hash.h>
static struct kmem_cache *revoke_record_cache;
static struct kmem_cache *revoke_table_cache;
/* Utility functions to maintain the revoke table */
-/* Borrowed from buffer.c: this is a tried and tested block hash function */
static inline int hash(journal_t *journal, unsigned int block)
{
struct jbd_revoke_table_s *table = journal->j_revoke;
- int hash_shift = table->hash_shift;
- return ((block << (hash_shift - 6)) ^
- (block >> 13) ^
- (block << (hash_shift - 12))) & (table->hash_size - 1);
+ return hash_32(block, table->hash_shift);
}
static int insert_revoke_hash(journal_t *journal, unsigned int blocknr,
if (jh->b_transaction == NULL && !buffer_locked(bh) &&
!buffer_dirty(bh) && !buffer_write_io_error(bh)) {
- /*
- * Get our reference so that bh cannot be freed before
- * we unlock it
- */
- get_bh(bh);
JBUFFER_TRACE(jh, "remove from checkpoint list");
ret = __jbd2_journal_remove_checkpoint(jh) + 1;
- BUFFER_TRACE(bh, "release");
- __brelse(bh);
}
return ret;
}
nblocks = jbd2_space_needed(journal);
while (jbd2_log_space_left(journal) < nblocks) {
- if (journal->j_flags & JBD2_ABORT)
- return;
write_unlock(&journal->j_state_lock);
mutex_lock(&journal->j_checkpoint_mutex);
* trace for forensic evidence.
*/
write_lock(&journal->j_state_lock);
+ if (journal->j_flags & JBD2_ABORT) {
+ mutex_unlock(&journal->j_checkpoint_mutex);
+ return;
+ }
spin_lock(&journal->j_list_lock);
nblocks = jbd2_space_needed(journal);
space_left = jbd2_log_space_left(journal);
}
}
-/*
- * Clean up transaction's list of buffers submitted for io.
- * We wait for any pending IO to complete and remove any clean
- * buffers. Note that we take the buffers in the opposite ordering
- * from the one in which they were submitted for IO.
- *
- * Return 0 on success, and return <0 if some buffers have failed
- * to be written out.
- *
- * Called with j_list_lock held.
- */
-static int __wait_cp_io(journal_t *journal, transaction_t *transaction)
-{
- struct journal_head *jh;
- struct buffer_head *bh;
- tid_t this_tid;
- int released = 0;
- int ret = 0;
-
- this_tid = transaction->t_tid;
-restart:
- /* Did somebody clean up the transaction in the meanwhile? */
- if (journal->j_checkpoint_transactions != transaction ||
- transaction->t_tid != this_tid)
- return ret;
- while (!released && transaction->t_checkpoint_io_list) {
- jh = transaction->t_checkpoint_io_list;
- bh = jh2bh(jh);
- get_bh(bh);
- if (buffer_locked(bh)) {
- spin_unlock(&journal->j_list_lock);
- wait_on_buffer(bh);
- /* the journal_head may have gone by now */
- BUFFER_TRACE(bh, "brelse");
- __brelse(bh);
- spin_lock(&journal->j_list_lock);
- goto restart;
- }
- if (unlikely(buffer_write_io_error(bh)))
- ret = -EIO;
-
- /*
- * Now in whatever state the buffer currently is, we know that
- * it has been written out and so we can drop it from the list
- */
- released = __jbd2_journal_remove_checkpoint(jh);
- __brelse(bh);
- }
-
- return ret;
-}
-
static void
__flush_batch(journal_t *journal, int *batch_count)
{
*batch_count = 0;
}
-/*
- * Try to flush one buffer from the checkpoint list to disk.
- *
- * Return 1 if something happened which requires us to abort the current
- * scan of the checkpoint list. Return <0 if the buffer has failed to
- * be written out.
- *
- * Called with j_list_lock held and drops it if 1 is returned
- */
-static int __process_buffer(journal_t *journal, struct journal_head *jh,
- int *batch_count, transaction_t *transaction)
-{
- struct buffer_head *bh = jh2bh(jh);
- int ret = 0;
-
- if (buffer_locked(bh)) {
- get_bh(bh);
- spin_unlock(&journal->j_list_lock);
- wait_on_buffer(bh);
- /* the journal_head may have gone by now */
- BUFFER_TRACE(bh, "brelse");
- __brelse(bh);
- ret = 1;
- } else if (jh->b_transaction != NULL) {
- transaction_t *t = jh->b_transaction;
- tid_t tid = t->t_tid;
-
- transaction->t_chp_stats.cs_forced_to_close++;
- spin_unlock(&journal->j_list_lock);
- if (unlikely(journal->j_flags & JBD2_UNMOUNT))
- /*
- * The journal thread is dead; so starting and
- * waiting for a commit to finish will cause
- * us to wait for a _very_ long time.
- */
- printk(KERN_ERR "JBD2: %s: "
- "Waiting for Godot: block %llu\n",
- journal->j_devname,
- (unsigned long long) bh->b_blocknr);
- jbd2_log_start_commit(journal, tid);
- jbd2_log_wait_commit(journal, tid);
- ret = 1;
- } else if (!buffer_dirty(bh)) {
- ret = 1;
- if (unlikely(buffer_write_io_error(bh)))
- ret = -EIO;
- get_bh(bh);
- BUFFER_TRACE(bh, "remove from checkpoint");
- __jbd2_journal_remove_checkpoint(jh);
- spin_unlock(&journal->j_list_lock);
- __brelse(bh);
- } else {
- /*
- * Important: we are about to write the buffer, and
- * possibly block, while still holding the journal lock.
- * We cannot afford to let the transaction logic start
- * messing around with this buffer before we write it to
- * disk, as that would break recoverability.
- */
- BUFFER_TRACE(bh, "queue");
- get_bh(bh);
- J_ASSERT_BH(bh, !buffer_jwrite(bh));
- journal->j_chkpt_bhs[*batch_count] = bh;
- __buffer_relink_io(jh);
- transaction->t_chp_stats.cs_written++;
- (*batch_count)++;
- if (*batch_count == JBD2_NR_BATCH) {
- spin_unlock(&journal->j_list_lock);
- __flush_batch(journal, batch_count);
- ret = 1;
- }
- }
- return ret;
-}
-
/*
* Perform an actual checkpoint. We take the first transaction on the
* list of transactions to be checkpointed and send all its buffers
*/
int jbd2_log_do_checkpoint(journal_t *journal)
{
- transaction_t *transaction;
- tid_t this_tid;
- int result;
+ struct journal_head *jh;
+ struct buffer_head *bh;
+ transaction_t *transaction;
+ tid_t this_tid;
+ int result, batch_count = 0;
jbd_debug(1, "Start checkpoint\n");
* done (maybe it's a new transaction, but it fell at the same
* address).
*/
- if (journal->j_checkpoint_transactions == transaction &&
- transaction->t_tid == this_tid) {
- int batch_count = 0;
- struct journal_head *jh;
- int retry = 0, err;
-
- while (!retry && transaction->t_checkpoint_list) {
- jh = transaction->t_checkpoint_list;
- retry = __process_buffer(journal, jh, &batch_count,
- transaction);
- if (retry < 0 && !result)
- result = retry;
- if (!retry && (need_resched() ||
- spin_needbreak(&journal->j_list_lock))) {
- spin_unlock(&journal->j_list_lock);
- retry = 1;
- break;
- }
+ if (journal->j_checkpoint_transactions != transaction ||
+ transaction->t_tid != this_tid)
+ goto out;
+
+ /* checkpoint all of the transaction's buffers */
+ while (transaction->t_checkpoint_list) {
+ jh = transaction->t_checkpoint_list;
+ bh = jh2bh(jh);
+
+ if (buffer_locked(bh)) {
+ spin_unlock(&journal->j_list_lock);
+ get_bh(bh);
+ wait_on_buffer(bh);
+ /* the journal_head may have gone by now */
+ BUFFER_TRACE(bh, "brelse");
+ __brelse(bh);
+ goto retry;
}
+ if (jh->b_transaction != NULL) {
+ transaction_t *t = jh->b_transaction;
+ tid_t tid = t->t_tid;
- if (batch_count) {
- if (!retry) {
- spin_unlock(&journal->j_list_lock);
- retry = 1;
- }
- __flush_batch(journal, &batch_count);
+ transaction->t_chp_stats.cs_forced_to_close++;
+ spin_unlock(&journal->j_list_lock);
+ if (unlikely(journal->j_flags & JBD2_UNMOUNT))
+ /*
+ * The journal thread is dead; so
+ * starting and waiting for a commit
+ * to finish will cause us to wait for
+ * a _very_ long time.
+ */
+ printk(KERN_ERR
+ "JBD2: %s: Waiting for Godot: block %llu\n",
+ journal->j_devname, (unsigned long long) bh->b_blocknr);
+
+ jbd2_log_start_commit(journal, tid);
+ jbd2_log_wait_commit(journal, tid);
+ goto retry;
+ }
+ if (!buffer_dirty(bh)) {
+ if (unlikely(buffer_write_io_error(bh)) && !result)
+ result = -EIO;
+ BUFFER_TRACE(bh, "remove from checkpoint");
+ if (__jbd2_journal_remove_checkpoint(jh))
+ /* The transaction was released; we're done */
+ goto out;
+ continue;
}
+ /*
+ * Important: we are about to write the buffer, and
+ * possibly block, while still holding the journal
+ * lock. We cannot afford to let the transaction
+ * logic start messing around with this buffer before
+ * we write it to disk, as that would break
+ * recoverability.
+ */
+ BUFFER_TRACE(bh, "queue");
+ get_bh(bh);
+ J_ASSERT_BH(bh, !buffer_jwrite(bh));
+ journal->j_chkpt_bhs[batch_count++] = bh;
+ __buffer_relink_io(jh);
+ transaction->t_chp_stats.cs_written++;
+ if ((batch_count == JBD2_NR_BATCH) ||
+ need_resched() ||
+ spin_needbreak(&journal->j_list_lock))
+ goto unlock_and_flush;
+ }
- if (retry) {
+ if (batch_count) {
+ unlock_and_flush:
+ spin_unlock(&journal->j_list_lock);
+ retry:
+ if (batch_count)
+ __flush_batch(journal, &batch_count);
spin_lock(&journal->j_list_lock);
goto restart;
+ }
+
+ /*
+ * Now we issued all of the transaction's buffers, let's deal
+ * with the buffers that are out for I/O.
+ */
+restart2:
+ /* Did somebody clean up the transaction in the meanwhile? */
+ if (journal->j_checkpoint_transactions != transaction ||
+ transaction->t_tid != this_tid)
+ goto out;
+
+ while (transaction->t_checkpoint_io_list) {
+ jh = transaction->t_checkpoint_io_list;
+ bh = jh2bh(jh);
+ if (buffer_locked(bh)) {
+ spin_unlock(&journal->j_list_lock);
+ get_bh(bh);
+ wait_on_buffer(bh);
+ /* the journal_head may have gone by now */
+ BUFFER_TRACE(bh, "brelse");
+ __brelse(bh);
+ spin_lock(&journal->j_list_lock);
+ goto restart2;
}
+ if (unlikely(buffer_write_io_error(bh)) && !result)
+ result = -EIO;
+
/*
- * Now we have cleaned up the first transaction's checkpoint
- * list. Let's clean up the second one
+ * Now in whatever state the buffer currently is, we
+ * know that it has been written out and so we can
+ * drop it from the list
*/
- err = __wait_cp_io(journal, transaction);
- if (!result)
- result = err;
+ if (__jbd2_journal_remove_checkpoint(jh))
+ break;
}
out:
spin_unlock(&journal->j_list_lock);
* Find all the written-back checkpoint buffers in the given list and
* release them.
*
- * Called with the journal locked.
* Called with j_list_lock held.
- * Returns number of buffers reaped (for debug)
+ * Returns 1 if we freed the transaction, 0 otherwise.
*/
-
-static int journal_clean_one_cp_list(struct journal_head *jh, int *released)
+static int journal_clean_one_cp_list(struct journal_head *jh)
{
struct journal_head *last_jh;
struct journal_head *next_jh = jh;
- int ret, freed = 0;
+ int ret;
+ int freed = 0;
- *released = 0;
if (!jh)
return 0;
jh = next_jh;
next_jh = jh->b_cpnext;
ret = __try_to_free_cp_buf(jh);
- if (ret) {
- freed++;
- if (ret == 2) {
- *released = 1;
- return freed;
- }
- }
+ if (!ret)
+ return freed;
+ if (ret == 2)
+ return 1;
+ freed = 1;
/*
* This function only frees up some memory
* if possible so we dont have an obligation
*
* Find all the written-back checkpoint buffers in the journal and release them.
*
- * Called with the journal locked.
* Called with j_list_lock held.
- * Returns number of buffers reaped (for debug)
*/
-
-int __jbd2_journal_clean_checkpoint_list(journal_t *journal)
+void __jbd2_journal_clean_checkpoint_list(journal_t *journal)
{
transaction_t *transaction, *last_transaction, *next_transaction;
- int ret = 0;
- int released;
+ int ret;
transaction = journal->j_checkpoint_transactions;
if (!transaction)
- goto out;
+ return;
last_transaction = transaction->t_cpprev;
next_transaction = transaction;
do {
transaction = next_transaction;
next_transaction = transaction->t_cpnext;
- ret += journal_clean_one_cp_list(transaction->
- t_checkpoint_list, &released);
+ ret = journal_clean_one_cp_list(transaction->t_checkpoint_list);
/*
* This function only frees up some memory if possible so we
* dont have an obligation to finish processing. Bail out if
* preemption requested:
*/
if (need_resched())
- goto out;
- if (released)
+ return;
+ if (ret)
continue;
/*
* It is essential that we are as careful as in the case of
* t_checkpoint_list with removing the buffer from the list as
* we can possibly see not yet submitted buffers on io_list
*/
- ret += journal_clean_one_cp_list(transaction->
- t_checkpoint_io_list, &released);
+ ret = journal_clean_one_cp_list(transaction->
+ t_checkpoint_io_list);
if (need_resched())
- goto out;
+ return;
+ /*
+ * Stop scanning if we couldn't free the transaction. This
+ * avoids pointless scanning of transactions which still
+ * weren't checkpointed.
+ */
+ if (!ret)
+ return;
} while (transaction != last_transaction);
-out:
- return ret;
}
/*
goto out_err;
}
- bh = __getblk(journal->j_dev, blocknr, journal->j_blocksize);
+ bh = getblk_unmovable(journal->j_dev, blocknr, journal->j_blocksize);
if (!bh) {
printk(KERN_ERR
"%s: Cannot get buffer for journal superblock\n",
goto out;
}
- if (jbd2_journal_has_csum_v2or3(journal) &&
- JBD2_HAS_COMPAT_FEATURE(journal, JBD2_FEATURE_COMPAT_CHECKSUM)) {
- /* Can't have checksum v1 and v2 on at the same time! */
- printk(KERN_ERR "JBD2: Can't enable checksumming v1 and v2 "
- "at the same time!\n");
- goto out;
- }
-
if (JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_CSUM_V2) &&
JBD2_HAS_INCOMPAT_FEATURE(journal, JBD2_FEATURE_INCOMPAT_CSUM_V3)) {
/* Can't have checksum v2 and v3 at the same time! */
goto out;
}
+ if (jbd2_journal_has_csum_v2or3(journal) &&
+ JBD2_HAS_COMPAT_FEATURE(journal, JBD2_FEATURE_COMPAT_CHECKSUM)) {
+ /* Can't have checksum v1 and v2 on at the same time! */
+ printk(KERN_ERR "JBD2: Can't enable checksumming v1 and v2/3 "
+ "at the same time!\n");
+ goto out;
+ }
+
if (!jbd2_verify_csum_type(journal, sb)) {
printk(KERN_ERR "JBD2: Unknown checksum type\n");
goto out;
journal->j_chksum_driver = NULL;
return 0;
}
- }
- /* Precompute checksum seed for all metadata */
- if (jbd2_journal_has_csum_v2or3(journal))
+ /* Precompute checksum seed for all metadata */
journal->j_csum_seed = jbd2_chksum(journal, ~0,
sb->s_uuid,
sizeof(sb->s_uuid));
+ }
}
/* If enabling v1 checksums, downgrade superblock */
!jbd2_descr_block_csum_verify(journal,
bh->b_data)) {
err = -EIO;
+ brelse(bh);
goto failed;
}
#include <linux/init.h>
#include <linux/bio.h>
#include <linux/log2.h>
+#include <linux/hash.h>
#endif
static struct kmem_cache *jbd2_revoke_record_cache;
/* Utility functions to maintain the revoke table */
-/* Borrowed from buffer.c: this is a tried and tested block hash function */
static inline int hash(journal_t *journal, unsigned long long block)
{
- struct jbd2_revoke_table_s *table = journal->j_revoke;
- int hash_shift = table->hash_shift;
- int hash = (int)block ^ (int)((block >> 31) >> 1);
-
- return ((hash << (hash_shift - 6)) ^
- (hash >> 13) ^
- (hash << (hash_shift - 12))) & (table->hash_size - 1);
+ return hash_64(block, journal->j_revoke->hash_shift);
}
static int insert_revoke_hash(journal_t *journal, unsigned long long blocknr,
return security_inode_permission(inode, mask);
}
+EXPORT_SYMBOL(__inode_permission);
/**
* sb_permission - Check superblock-level permissions
}
EXPORT_SYMBOL(kern_path_mountpoint);
-/*
- * It's inline, so penalty for filesystems that don't use sticky bit is
- * minimal.
- */
-static inline int check_sticky(struct inode *dir, struct inode *inode)
+int __check_sticky(struct inode *dir, struct inode *inode)
{
kuid_t fsuid = current_fsuid();
- if (!(dir->i_mode & S_ISVTX))
- return 0;
if (uid_eq(inode->i_uid, fsuid))
return 0;
if (uid_eq(dir->i_uid, fsuid))
return 0;
return !capable_wrt_inode_uidgid(inode, CAP_FOWNER);
}
+EXPORT_SYMBOL(__check_sticky);
/*
* Check whether we can remove a link victim from directory dir, check
}
mutex_lock_nested(&p1->d_inode->i_mutex, I_MUTEX_PARENT);
- mutex_lock_nested(&p2->d_inode->i_mutex, I_MUTEX_CHILD);
+ mutex_lock_nested(&p2->d_inode->i_mutex, I_MUTEX_PARENT2);
return NULL;
}
EXPORT_SYMBOL(lock_rename);
error = may_open(&nd->path, acc_mode, open_flag);
if (error)
goto out;
- file->f_path.mnt = nd->path.mnt;
- error = finish_open(file, nd->path.dentry, NULL, opened);
- if (error) {
+
+ BUG_ON(*opened & FILE_OPENED); /* once it's opened, it's opened */
+ error = vfs_open(&nd->path, file, current_cred());
+ if (!error) {
+ *opened |= FILE_OPENED;
+ } else {
if (error == -EOPENSTALE)
goto stale_open;
goto out;
if (error)
goto out2;
audit_inode(pathname, nd->path.dentry, 0);
- error = may_open(&nd->path, op->acc_mode, op->open_flag);
+ /* Don't check for other permissions, the inode was just created */
+ error = may_open(&nd->path, MAY_OPEN, op->open_flag);
if (error)
goto out2;
file->f_path.mnt = nd->path.mnt;
bool should_retry = false;
int error;
- if (flags & ~(RENAME_NOREPLACE | RENAME_EXCHANGE))
+ if (flags & ~(RENAME_NOREPLACE | RENAME_EXCHANGE | RENAME_WHITEOUT))
return -EINVAL;
- if ((flags & RENAME_NOREPLACE) && (flags & RENAME_EXCHANGE))
+ if ((flags & (RENAME_NOREPLACE | RENAME_WHITEOUT)) &&
+ (flags & RENAME_EXCHANGE))
return -EINVAL;
+ if ((flags & RENAME_WHITEOUT) && !capable(CAP_MKNOD))
+ return -EPERM;
+
retry:
from = user_path_parent(olddfd, oldname, &oldnd, lookup_flags);
if (IS_ERR(from)) {
return sys_renameat2(AT_FDCWD, oldname, AT_FDCWD, newname, 0);
}
+int vfs_whiteout(struct inode *dir, struct dentry *dentry)
+{
+ int error = may_create(dir, dentry);
+ if (error)
+ return error;
+
+ if (!dir->i_op->mknod)
+ return -EPERM;
+
+ return dir->i_op->mknod(dir, dentry,
+ S_IFCHR | WHITEOUT_MODE, WHITEOUT_DEV);
+}
+EXPORT_SYMBOL(vfs_whiteout);
+
int readlink_copy(char __user *buffer, int buflen, const char *link)
{
int len = PTR_ERR(link);
namespace_unlock();
}
+/**
+ * clone_private_mount - create a private clone of a path
+ *
+ * This creates a new vfsmount, which will be the clone of @path. The new will
+ * not be attached anywhere in the namespace and will be private (i.e. changes
+ * to the originating mount won't be propagated into this).
+ *
+ * Release with mntput().
+ */
+struct vfsmount *clone_private_mount(struct path *path)
+{
+ struct mount *old_mnt = real_mount(path->mnt);
+ struct mount *new_mnt;
+
+ if (IS_MNT_UNBINDABLE(old_mnt))
+ return ERR_PTR(-EINVAL);
+
+ down_read(&namespace_sem);
+ new_mnt = clone_mnt(old_mnt, path->dentry, CL_PRIVATE);
+ up_read(&namespace_sem);
+ if (IS_ERR(new_mnt))
+ return ERR_CAST(new_mnt);
+
+ return &new_mnt->mnt;
+}
+EXPORT_SYMBOL_GPL(clone_private_mount);
+
int iterate_mounts(int (*f)(struct vfsmount *, void *), void *arg,
struct vfsmount *root)
{
loff_t offset = header->args.offset;
size_t count = header->args.count;
struct page **pages = header->args.pages;
- int pg_index = pg_index = header->args.pgbase >> PAGE_CACHE_SHIFT;
+ int pg_index = header->args.pgbase >> PAGE_CACHE_SHIFT;
unsigned int pg_len;
struct blk_plug plug;
int i;
dprintk("%s CREATING PIPEFS MESSAGE\n", __func__);
+ mutex_lock(&nn->bl_mutex);
bl_pipe_msg.bl_wq = &nn->bl_wq;
b->simple.len += 4; /* single volume */
if (b->simple.len > PAGE_SIZE)
- return -EIO;
+ goto out_unlock;
memset(msg, 0, sizeof(*msg));
msg->len = sizeof(*bl_msg) + b->simple.len;
msg->data = kzalloc(msg->len, gfp_mask);
if (!msg->data)
- goto out;
+ goto out_free_data;
bl_msg = msg->data;
bl_msg->type = BL_DEVICE_MOUNT,
rc = rpc_queue_upcall(nn->bl_device_pipe, msg);
if (rc < 0) {
remove_wait_queue(&nn->bl_wq, &wq);
- goto out;
+ goto out_free_data;
}
set_current_state(TASK_UNINTERRUPTIBLE);
if (reply->status != BL_DEVICE_REQUEST_PROC) {
printk(KERN_WARNING "%s failed to decode device: %d\n",
__func__, reply->status);
- goto out;
+ goto out_free_data;
}
dev = MKDEV(reply->major, reply->minor);
-out:
+out_free_data:
kfree(msg->data);
+out_unlock:
+ mutex_unlock(&nn->bl_mutex);
return dev;
}
struct nfs_net *nn = net_generic(net, nfs_net_id);
struct dentry *dentry;
+ mutex_init(&nn->bl_mutex);
init_waitqueue_head(&nn->bl_wq);
nn->bl_device_pipe = rpc_mkpipe_data(&bl_upcall_ops, 0);
if (IS_ERR(nn->bl_device_pipe))
continue;
if (!test_bit(NFS_DELEGATED_STATE, &state->flags))
continue;
+ if (!nfs4_valid_open_stateid(state))
+ continue;
if (!nfs4_stateid_match(&state->stateid, stateid))
continue;
get_nfs_open_context(ctx);
{
int res = 0;
- res = nfs4_proc_delegreturn(inode, delegation->cred, &delegation->stateid, issync);
+ if (!test_bit(NFS_DELEGATION_REVOKED, &delegation->flags))
+ res = nfs4_proc_delegreturn(inode,
+ delegation->cred,
+ &delegation->stateid,
+ issync);
nfs_free_delegation(delegation);
return res;
}
{
struct nfs_client *clp = NFS_SERVER(inode)->nfs_client;
struct nfs_inode *nfsi = NFS_I(inode);
- int err;
+ int err = 0;
if (delegation == NULL)
return 0;
do {
+ if (test_bit(NFS_DELEGATION_REVOKED, &delegation->flags))
+ break;
err = nfs_delegation_claim_opens(inode, &delegation->stateid);
if (!issync || err != -EAGAIN)
break;
rcu_read_unlock();
}
+static void nfs_revoke_delegation(struct inode *inode)
+{
+ struct nfs_delegation *delegation;
+ rcu_read_lock();
+ delegation = rcu_dereference(NFS_I(inode)->delegation);
+ if (delegation != NULL) {
+ set_bit(NFS_DELEGATION_REVOKED, &delegation->flags);
+ nfs_mark_return_delegation(NFS_SERVER(inode), delegation);
+ }
+ rcu_read_unlock();
+}
+
void nfs_remove_bad_delegation(struct inode *inode)
{
struct nfs_delegation *delegation;
+ nfs_revoke_delegation(inode);
delegation = nfs_inode_detach_delegation(inode);
if (delegation) {
nfs_inode_find_state_and_recover(inode, &delegation->stateid);
NFS_DELEGATION_RETURN_IF_CLOSED,
NFS_DELEGATION_REFERENCED,
NFS_DELEGATION_RETURNING,
+ NFS_DELEGATION_REVOKED,
};
int nfs_inode_set_delegation(struct inode *inode, struct rpc_cred *cred, struct nfs_openres *res);
case -ENOENT:
d_drop(dentry);
d_add(dentry, NULL);
+ nfs_set_verifier(dentry, nfs_save_change_attribute(dir));
break;
case -EISDIR:
case -ENOTDIR:
{
struct nfs_direct_req *dreq = container_of(kref, struct nfs_direct_req, kref);
+ nfs_free_pnfs_ds_cinfo(&dreq->ds_cinfo);
if (dreq->l_ctx != NULL)
nfs_put_lock_context(dreq->l_ctx);
if (dreq->ctx != NULL)
case -NFS4ERR_DELEG_REVOKED:
case -NFS4ERR_ADMIN_REVOKED:
case -NFS4ERR_BAD_STATEID:
- if (state == NULL)
- break;
- nfs_remove_bad_delegation(state->inode);
case -NFS4ERR_OPENMODE:
if (state == NULL)
break;
{
struct inode *inode = dentry->d_inode;
int need_atime = NFS_I(inode)->cache_validity & NFS_INO_INVALID_ATIME;
- int err;
+ int err = 0;
trace_nfs_getattr_enter(inode);
/* Flush out writes to the server in order to update c/mtime. */
struct rpc_pipe *bl_device_pipe;
struct bl_dev_msg bl_mount_reply;
wait_queue_head_t bl_wq;
+ struct mutex bl_mutex;
struct list_head nfs_client_list;
struct list_head nfs_volume_list;
#if IS_ENABLED(CONFIG_NFS_V4)
case -NFS4ERR_DELEG_REVOKED:
case -NFS4ERR_ADMIN_REVOKED:
case -NFS4ERR_BAD_STATEID:
- if (inode != NULL && nfs4_have_delegation(inode, FMODE_READ)) {
- nfs_remove_bad_delegation(inode);
- exception->retry = 1;
- break;
- }
if (state == NULL)
break;
ret = nfs4_schedule_stateid_recovery(server, state);
nfs_inode_find_state_and_recover(state->inode,
stateid);
nfs4_schedule_stateid_recovery(server, state);
- return 0;
+ return -EAGAIN;
case -NFS4ERR_DELAY:
case -NFS4ERR_GRACE:
set_bit(NFS_DELEGATED_STATE, &state->flags);
return ret;
}
+static void nfs_finish_clear_delegation_stateid(struct nfs4_state *state)
+{
+ nfs_remove_bad_delegation(state->inode);
+ write_seqlock(&state->seqlock);
+ nfs4_stateid_copy(&state->stateid, &state->open_stateid);
+ write_sequnlock(&state->seqlock);
+ clear_bit(NFS_DELEGATED_STATE, &state->flags);
+}
+
+static void nfs40_clear_delegation_stateid(struct nfs4_state *state)
+{
+ if (rcu_access_pointer(NFS_I(state->inode)->delegation) != NULL)
+ nfs_finish_clear_delegation_stateid(state);
+}
+
+static int nfs40_open_expired(struct nfs4_state_owner *sp, struct nfs4_state *state)
+{
+ /* NFSv4.0 doesn't allow for delegation recovery on open expire */
+ nfs40_clear_delegation_stateid(state);
+ return nfs4_open_expired(sp, state);
+}
+
#if defined(CONFIG_NFS_V4_1)
-static void nfs41_clear_delegation_stateid(struct nfs4_state *state)
+static void nfs41_check_delegation_stateid(struct nfs4_state *state)
{
struct nfs_server *server = NFS_SERVER(state->inode);
- nfs4_stateid *stateid = &state->stateid;
+ nfs4_stateid stateid;
struct nfs_delegation *delegation;
- struct rpc_cred *cred = NULL;
- int status = -NFS4ERR_BAD_STATEID;
-
- /* If a state reset has been done, test_stateid is unneeded */
- if (test_bit(NFS_DELEGATED_STATE, &state->flags) == 0)
- return;
+ struct rpc_cred *cred;
+ int status;
/* Get the delegation credential for use by test/free_stateid */
rcu_read_lock();
delegation = rcu_dereference(NFS_I(state->inode)->delegation);
- if (delegation != NULL &&
- nfs4_stateid_match(&delegation->stateid, stateid)) {
- cred = get_rpccred(delegation->cred);
- rcu_read_unlock();
- status = nfs41_test_stateid(server, stateid, cred);
- trace_nfs4_test_delegation_stateid(state, NULL, status);
- } else
+ if (delegation == NULL) {
rcu_read_unlock();
+ return;
+ }
+
+ nfs4_stateid_copy(&stateid, &delegation->stateid);
+ cred = get_rpccred(delegation->cred);
+ rcu_read_unlock();
+ status = nfs41_test_stateid(server, &stateid, cred);
+ trace_nfs4_test_delegation_stateid(state, NULL, status);
if (status != NFS_OK) {
/* Free the stateid unless the server explicitly
* informs us the stateid is unrecognized. */
if (status != -NFS4ERR_BAD_STATEID)
- nfs41_free_stateid(server, stateid, cred);
- nfs_remove_bad_delegation(state->inode);
-
- write_seqlock(&state->seqlock);
- nfs4_stateid_copy(&state->stateid, &state->open_stateid);
- write_sequnlock(&state->seqlock);
- clear_bit(NFS_DELEGATED_STATE, &state->flags);
+ nfs41_free_stateid(server, &stateid, cred);
+ nfs_finish_clear_delegation_stateid(state);
}
- if (cred != NULL)
- put_rpccred(cred);
+ put_rpccred(cred);
}
/**
{
int status;
- nfs41_clear_delegation_stateid(state);
+ nfs41_check_delegation_stateid(state);
status = nfs41_check_open_stateid(state);
if (status != NFS_OK)
status = nfs4_open_expired(sp, state);
seq = raw_seqcount_begin(&sp->so_reclaim_seqcount);
ret = _nfs4_proc_open(opendata);
- if (ret != 0) {
- if (ret == -ENOENT) {
- dentry = opendata->dentry;
- if (dentry->d_inode)
- d_delete(dentry);
- else if (d_unhashed(dentry))
- d_add(dentry, NULL);
-
- nfs_set_verifier(dentry,
- nfs_save_change_attribute(opendata->dir->d_inode));
- }
+ if (ret != 0)
goto out;
- }
state = nfs4_opendata_to_nfs4_state(opendata);
ret = PTR_ERR(state);
case -NFS4ERR_DELEG_REVOKED:
case -NFS4ERR_ADMIN_REVOKED:
case -NFS4ERR_BAD_STATEID:
- if (state == NULL)
- break;
- nfs_remove_bad_delegation(state->inode);
case -NFS4ERR_OPENMODE:
if (state == NULL)
break;
static const struct nfs4_state_recovery_ops nfs40_nograce_recovery_ops = {
.owner_flag_bit = NFS_OWNER_RECLAIM_NOGRACE,
.state_flag_bit = NFS_STATE_RECLAIM_NOGRACE,
- .recover_open = nfs4_open_expired,
+ .recover_open = nfs40_open_expired,
.recover_lock = nfs4_lock_expired,
.establish_clid = nfs4_init_clientid,
};
| NFS_CAP_CHANGE_ATTR
| NFS_CAP_POSIX_LOCK
| NFS_CAP_STATEID_NFSV41
- | NFS_CAP_ATOMIC_OPEN_V1
- | NFS_CAP_SEEK,
+ | NFS_CAP_ATOMIC_OPEN_V1,
.init_client = nfs41_init_client,
.shutdown_client = nfs41_shutdown_client,
.match_stateid = nfs41_match_stateid,
| NFS_CAP_CHANGE_ATTR
| NFS_CAP_POSIX_LOCK
| NFS_CAP_STATEID_NFSV41
- | NFS_CAP_ATOMIC_OPEN_V1,
+ | NFS_CAP_ATOMIC_OPEN_V1
+ | NFS_CAP_SEEK,
.init_client = nfs41_init_client,
.shutdown_client = nfs41_shutdown_client,
.match_stateid = nfs41_match_stateid,
* All rights reserved.
*
* Benny Halevy <bhalevy@panasas.com>
- * Boaz Harrosh <bharrosh@panasas.com>
+ * Boaz Harrosh <ooo@electrozaur.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* All rights reserved.
*
* Benny Halevy <bhalevy@panasas.com>
- * Boaz Harrosh <bharrosh@panasas.com>
+ * Boaz Harrosh <ooo@electrozaur.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* All rights reserved.
*
* Benny Halevy <bhalevy@panasas.com>
- * Boaz Harrosh <bharrosh@panasas.com>
+ * Boaz Harrosh <ooo@electrozaur.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
* All rights reserved.
*
* Benny Halevy <bhalevy@panasas.com>
- * Boaz Harrosh <bharrosh@panasas.com>
+ * Boaz Harrosh <ooo@electrozaur.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
if (test_and_clear_bit(PG_INODE_REF, &req->wb_flags))
nfs_release_request(req);
- else
- WARN_ON_ONCE(1);
}
static void
{
if (test_and_set_bit(0, &clp->cl_cb_slot_busy) != 0) {
rpc_sleep_on(&clp->cl_cb_waitq, task, NULL);
- dprintk("%s slot is busy\n", __func__);
- return false;
+ /* Race breaker */
+ if (test_and_set_bit(0, &clp->cl_cb_slot_busy) != 0) {
+ dprintk("%s slot is busy\n", __func__);
+ return false;
+ }
+ rpc_wake_up_queued_task(&clp->cl_cb_waitq, task);
}
return true;
}
*/
if (argp->opcnt == resp->opcnt)
return false;
-
+ if (next->opnum == OP_ILLEGAL)
+ return false;
nextd = OPDESC(next);
/*
* Rest of 2.6.3.1.1: certain operations will return WRONGSEC
static inline u32 nfsd4_sequence_rsize(struct svc_rqst *rqstp,
struct nfsd4_op *op)
{
- return NFS4_MAX_SESSIONID_LEN + 20;
+ return (op_encode_hdr_size
+ + XDR_QUADLEN(NFS4_MAX_SESSIONID_LEN) + 5) * sizeof(__be32);
}
static inline u32 nfsd4_setattr_rsize(struct svc_rqst *rqstp, struct nfsd4_op *op)
.op_func = (nfsd4op_func)nfsd4_sequence,
.op_flags = ALLOWED_WITHOUT_FH | ALLOWED_AS_FIRST_OP,
.op_name = "OP_SEQUENCE",
+ .op_rsize_bop = (nfsd4op_rsize)nfsd4_sequence_rsize,
},
[OP_DESTROY_CLIENTID] = {
.op_func = (nfsd4op_func)nfsd4_destroy_clientid,
(NFSD4_SUPPORTED_ATTRS_WORD2 | FATTR4_WORD2_SUPPATTR_EXCLCREAT)
#ifdef CONFIG_NFSD_V4_SECURITY_LABEL
-#define NFSD4_2_SUPPORTED_ATTRS_WORD2 \
- (NFSD4_1_SUPPORTED_ATTRS_WORD2 | FATTR4_WORD2_SECURITY_LABEL)
+#define NFSD4_2_SECURITY_ATTRS FATTR4_WORD2_SECURITY_LABEL
#else
-#define NFSD4_2_SUPPORTED_ATTRS_WORD2 0
+#define NFSD4_2_SECURITY_ATTRS 0
#endif
+#define NFSD4_2_SUPPORTED_ATTRS_WORD2 \
+ (NFSD4_1_SUPPORTED_ATTRS_WORD2 | \
+ NFSD4_2_SECURITY_ATTRS)
+
static inline u32 nfsd_suppattrs0(u32 minorversion)
{
return minorversion ? NFSD4_1_SUPPORTED_ATTRS_WORD0
&fsnotify_mark_srcu);
}
+ /*
+ * We need to merge inode & vfsmount mark lists so that inode mark
+ * ignore masks are properly reflected for mount mark notifications.
+ * That's why this traversal is so complicated...
+ */
while (inode_node || vfsmount_node) {
- inode_group = vfsmount_group = NULL;
+ inode_group = NULL;
+ inode_mark = NULL;
+ vfsmount_group = NULL;
+ vfsmount_mark = NULL;
if (inode_node) {
inode_mark = hlist_entry(srcu_dereference(inode_node, &fsnotify_mark_srcu),
vfsmount_group = vfsmount_mark->group;
}
- if (inode_group > vfsmount_group) {
- /* handle inode */
- ret = send_to_group(to_tell, inode_mark, NULL, mask,
- data, data_is, cookie, file_name);
- /* we didn't use the vfsmount_mark */
- vfsmount_group = NULL;
- } else if (vfsmount_group > inode_group) {
- ret = send_to_group(to_tell, NULL, vfsmount_mark, mask,
- data, data_is, cookie, file_name);
- inode_group = NULL;
- } else {
- ret = send_to_group(to_tell, inode_mark, vfsmount_mark,
- mask, data, data_is, cookie,
- file_name);
+ if (inode_group && vfsmount_group) {
+ int cmp = fsnotify_compare_groups(inode_group,
+ vfsmount_group);
+ if (cmp > 0) {
+ inode_group = NULL;
+ inode_mark = NULL;
+ } else if (cmp < 0) {
+ vfsmount_group = NULL;
+ vfsmount_mark = NULL;
+ }
}
+ ret = send_to_group(to_tell, inode_mark, vfsmount_mark, mask,
+ data, data_is, cookie, file_name);
if (ret && (mask & ALL_FSNOTIFY_PERM_EVENTS))
goto out;
/* protects reads of inode and vfsmount marks list */
extern struct srcu_struct fsnotify_mark_srcu;
+/* compare two groups for sorting of marks lists */
+extern int fsnotify_compare_groups(struct fsnotify_group *a,
+ struct fsnotify_group *b);
+
extern void fsnotify_set_inode_mark_mask_locked(struct fsnotify_mark *fsn_mark,
__u32 mask);
/* add a mark to an inode */
{
struct fsnotify_mark *lmark, *last = NULL;
int ret = 0;
+ int cmp;
mark->flags |= FSNOTIFY_MARK_FLAG_INODE;
goto out;
}
- if (mark->group->priority < lmark->group->priority)
- continue;
-
- if ((mark->group->priority == lmark->group->priority) &&
- (mark->group < lmark->group))
+ cmp = fsnotify_compare_groups(lmark->group, mark->group);
+ if (cmp < 0)
continue;
hlist_add_before_rcu(&mark->i.i_list, &lmark->i.i_list);
spin_unlock(&inode->i_lock);
/* In case the dropping of a reference would nuke next_i. */
- if ((&next_i->i_sb_list != list) &&
- atomic_read(&next_i->i_count)) {
+ while (&next_i->i_sb_list != list) {
spin_lock(&next_i->i_lock);
- if (!(next_i->i_state & (I_FREEING | I_WILL_FREE))) {
+ if (!(next_i->i_state & (I_FREEING | I_WILL_FREE)) &&
+ atomic_read(&next_i->i_count)) {
__iget(next_i);
need_iput = next_i;
+ spin_unlock(&next_i->i_lock);
+ break;
}
spin_unlock(&next_i->i_lock);
+ next_i = list_entry(next_i->i_sb_list.next,
+ struct inode, i_sb_list);
}
/*
- * We can safely drop inode_sb_list_lock here because we hold
- * references on both inode and next_i. Also no new inodes
- * will be added since the umount has begun.
+ * We can safely drop inode_sb_list_lock here because either
+ * we actually hold references on both inode and next_i or
+ * end of list. Also no new inodes will be added since the
+ * umount has begun.
*/
spin_unlock(&inode_sb_list_lock);
struct fsnotify_event *kevent;
char __user *start;
int ret;
- DEFINE_WAIT(wait);
+ DEFINE_WAIT_FUNC(wait, woken_wake_function);
start = buf;
group = file->private_data;
+ add_wait_queue(&group->notification_waitq, &wait);
while (1) {
- prepare_to_wait(&group->notification_waitq, &wait, TASK_INTERRUPTIBLE);
-
mutex_lock(&group->notification_mutex);
kevent = get_one_event(group, count);
mutex_unlock(&group->notification_mutex);
if (start != buf)
break;
- schedule();
+ wait_woken(&wait, TASK_INTERRUPTIBLE, MAX_SCHEDULE_TIMEOUT);
}
+ remove_wait_queue(&group->notification_waitq, &wait);
- finish_wait(&group->notification_waitq, &wait);
if (start != buf && ret != -EFAULT)
ret = buf - start;
return ret;
mark->ignored_mask = mask;
}
+/*
+ * Sorting function for lists of fsnotify marks.
+ *
+ * Fanotify supports different notification classes (reflected as priority of
+ * notification group). Events shall be passed to notification groups in
+ * decreasing priority order. To achieve this marks in notification lists for
+ * inodes and vfsmounts are sorted so that priorities of corresponding groups
+ * are descending.
+ *
+ * Furthermore correct handling of the ignore mask requires processing inode
+ * and vfsmount marks of each group together. Using the group address as
+ * further sort criterion provides a unique sorting order and thus we can
+ * merge inode and vfsmount lists of marks in linear time and find groups
+ * present in both lists.
+ *
+ * A return value of 1 signifies that b has priority over a.
+ * A return value of 0 signifies that the two marks have to be handled together.
+ * A return value of -1 signifies that a has priority over b.
+ */
+int fsnotify_compare_groups(struct fsnotify_group *a, struct fsnotify_group *b)
+{
+ if (a == b)
+ return 0;
+ if (!a)
+ return 1;
+ if (!b)
+ return -1;
+ if (a->priority < b->priority)
+ return 1;
+ if (a->priority > b->priority)
+ return -1;
+ if (a < b)
+ return 1;
+ return -1;
+}
+
/*
* Attach an initialized mark to a given group and fs object.
* These marks may be used for the fsnotify backend to determine which
struct mount *m = real_mount(mnt);
struct fsnotify_mark *lmark, *last = NULL;
int ret = 0;
+ int cmp;
mark->flags |= FSNOTIFY_MARK_FLAG_VFSMOUNT;
goto out;
}
- if (mark->group->priority < lmark->group->priority)
- continue;
-
- if ((mark->group->priority == lmark->group->priority) &&
- (mark->group < lmark->group))
+ cmp = fsnotify_compare_groups(lmark->group, mark->group);
+ if (cmp < 0)
continue;
hlist_add_before_rcu(&mark->m.m_list, &lmark->m.m_list);
size_t veclen, size_t total)
{
int ret;
- struct msghdr msg;
+ struct msghdr msg = {.msg_flags = 0,};
if (sock == NULL) {
ret = -EINVAL;
* NOTE: This dentry already has ->d_op set from
* ocfs2_get_parent() and ocfs2_get_dentry()
*/
- if (ret)
+ if (!IS_ERR_OR_NULL(ret))
dentry = ret;
status = ocfs2_dentry_attach_lock(dentry, inode,
f = get_empty_filp();
if (!IS_ERR(f)) {
f->f_flags = flags;
- f->f_path = *path;
- error = do_dentry_open(f, NULL, cred);
+ error = vfs_open(path, f, cred);
if (!error) {
/* from now on we need fput() to dispose of f */
error = open_check_o_direct(f);
}
EXPORT_SYMBOL(dentry_open);
+/**
+ * vfs_open - open the file at the given path
+ * @path: path to open
+ * @filp: newly allocated file with f_flag initialized
+ * @cred: credentials to use
+ */
+int vfs_open(const struct path *path, struct file *filp,
+ const struct cred *cred)
+{
+ struct inode *inode = path->dentry->d_inode;
+
+ if (inode->i_op->dentry_open)
+ return inode->i_op->dentry_open(path->dentry, filp, cred);
+ else {
+ filp->f_path = *path;
+ return do_dentry_open(filp, NULL, cred);
+ }
+}
+EXPORT_SYMBOL(vfs_open);
+
static inline int build_open_flags(int flags, umode_t mode, struct open_flags *op)
{
int lookup_flags = 0;
--- /dev/null
+config OVERLAY_FS
+ tristate "Overlay filesystem support"
+ help
+ An overlay filesystem combines two filesystems - an 'upper' filesystem
+ and a 'lower' filesystem. When a name exists in both filesystems, the
+ object in the 'upper' filesystem is visible while the object in the
+ 'lower' filesystem is either hidden or, in the case of directories,
+ merged with the 'upper' object.
+
+ For more information see Documentation/filesystems/overlayfs.txt
--- /dev/null
+#
+# Makefile for the overlay filesystem.
+#
+
+obj-$(CONFIG_OVERLAY_FS) += overlay.o
+
+overlay-objs := super.o inode.o dir.o readdir.o copy_up.o
--- /dev/null
+/*
+ *
+ * Copyright (C) 2011 Novell Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/file.h>
+#include <linux/splice.h>
+#include <linux/xattr.h>
+#include <linux/security.h>
+#include <linux/uaccess.h>
+#include <linux/sched.h>
+#include <linux/namei.h>
+#include "overlayfs.h"
+
+#define OVL_COPY_UP_CHUNK_SIZE (1 << 20)
+
+int ovl_copy_xattr(struct dentry *old, struct dentry *new)
+{
+ ssize_t list_size, size;
+ char *buf, *name, *value;
+ int error;
+
+ if (!old->d_inode->i_op->getxattr ||
+ !new->d_inode->i_op->getxattr)
+ return 0;
+
+ list_size = vfs_listxattr(old, NULL, 0);
+ if (list_size <= 0) {
+ if (list_size == -EOPNOTSUPP)
+ return 0;
+ return list_size;
+ }
+
+ buf = kzalloc(list_size, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ error = -ENOMEM;
+ value = kmalloc(XATTR_SIZE_MAX, GFP_KERNEL);
+ if (!value)
+ goto out;
+
+ list_size = vfs_listxattr(old, buf, list_size);
+ if (list_size <= 0) {
+ error = list_size;
+ goto out_free_value;
+ }
+
+ for (name = buf; name < (buf + list_size); name += strlen(name) + 1) {
+ size = vfs_getxattr(old, name, value, XATTR_SIZE_MAX);
+ if (size <= 0) {
+ error = size;
+ goto out_free_value;
+ }
+ error = vfs_setxattr(new, name, value, size, 0);
+ if (error)
+ goto out_free_value;
+ }
+
+out_free_value:
+ kfree(value);
+out:
+ kfree(buf);
+ return error;
+}
+
+static int ovl_copy_up_data(struct path *old, struct path *new, loff_t len)
+{
+ struct file *old_file;
+ struct file *new_file;
+ loff_t old_pos = 0;
+ loff_t new_pos = 0;
+ int error = 0;
+
+ if (len == 0)
+ return 0;
+
+ old_file = ovl_path_open(old, O_RDONLY);
+ if (IS_ERR(old_file))
+ return PTR_ERR(old_file);
+
+ new_file = ovl_path_open(new, O_WRONLY);
+ if (IS_ERR(new_file)) {
+ error = PTR_ERR(new_file);
+ goto out_fput;
+ }
+
+ /* FIXME: copy up sparse files efficiently */
+ while (len) {
+ size_t this_len = OVL_COPY_UP_CHUNK_SIZE;
+ long bytes;
+
+ if (len < this_len)
+ this_len = len;
+
+ if (signal_pending_state(TASK_KILLABLE, current)) {
+ error = -EINTR;
+ break;
+ }
+
+ bytes = do_splice_direct(old_file, &old_pos,
+ new_file, &new_pos,
+ this_len, SPLICE_F_MOVE);
+ if (bytes <= 0) {
+ error = bytes;
+ break;
+ }
+ WARN_ON(old_pos != new_pos);
+
+ len -= bytes;
+ }
+
+ fput(new_file);
+out_fput:
+ fput(old_file);
+ return error;
+}
+
+static char *ovl_read_symlink(struct dentry *realdentry)
+{
+ int res;
+ char *buf;
+ struct inode *inode = realdentry->d_inode;
+ mm_segment_t old_fs;
+
+ res = -EINVAL;
+ if (!inode->i_op->readlink)
+ goto err;
+
+ res = -ENOMEM;
+ buf = (char *) __get_free_page(GFP_KERNEL);
+ if (!buf)
+ goto err;
+
+ old_fs = get_fs();
+ set_fs(get_ds());
+ /* The cast to a user pointer is valid due to the set_fs() */
+ res = inode->i_op->readlink(realdentry,
+ (char __user *)buf, PAGE_SIZE - 1);
+ set_fs(old_fs);
+ if (res < 0) {
+ free_page((unsigned long) buf);
+ goto err;
+ }
+ buf[res] = '\0';
+
+ return buf;
+
+err:
+ return ERR_PTR(res);
+}
+
+static int ovl_set_timestamps(struct dentry *upperdentry, struct kstat *stat)
+{
+ struct iattr attr = {
+ .ia_valid =
+ ATTR_ATIME | ATTR_MTIME | ATTR_ATIME_SET | ATTR_MTIME_SET,
+ .ia_atime = stat->atime,
+ .ia_mtime = stat->mtime,
+ };
+
+ return notify_change(upperdentry, &attr, NULL);
+}
+
+int ovl_set_attr(struct dentry *upperdentry, struct kstat *stat)
+{
+ int err = 0;
+
+ if (!S_ISLNK(stat->mode)) {
+ struct iattr attr = {
+ .ia_valid = ATTR_MODE,
+ .ia_mode = stat->mode,
+ };
+ err = notify_change(upperdentry, &attr, NULL);
+ }
+ if (!err) {
+ struct iattr attr = {
+ .ia_valid = ATTR_UID | ATTR_GID,
+ .ia_uid = stat->uid,
+ .ia_gid = stat->gid,
+ };
+ err = notify_change(upperdentry, &attr, NULL);
+ }
+ if (!err)
+ ovl_set_timestamps(upperdentry, stat);
+
+ return err;
+
+}
+
+static int ovl_copy_up_locked(struct dentry *workdir, struct dentry *upperdir,
+ struct dentry *dentry, struct path *lowerpath,
+ struct kstat *stat, struct iattr *attr,
+ const char *link)
+{
+ struct inode *wdir = workdir->d_inode;
+ struct inode *udir = upperdir->d_inode;
+ struct dentry *newdentry = NULL;
+ struct dentry *upper = NULL;
+ umode_t mode = stat->mode;
+ int err;
+
+ newdentry = ovl_lookup_temp(workdir, dentry);
+ err = PTR_ERR(newdentry);
+ if (IS_ERR(newdentry))
+ goto out;
+
+ upper = lookup_one_len(dentry->d_name.name, upperdir,
+ dentry->d_name.len);
+ err = PTR_ERR(upper);
+ if (IS_ERR(upper))
+ goto out1;
+
+ /* Can't properly set mode on creation because of the umask */
+ stat->mode &= S_IFMT;
+ err = ovl_create_real(wdir, newdentry, stat, link, NULL, true);
+ stat->mode = mode;
+ if (err)
+ goto out2;
+
+ if (S_ISREG(stat->mode)) {
+ struct path upperpath;
+ ovl_path_upper(dentry, &upperpath);
+ BUG_ON(upperpath.dentry != NULL);
+ upperpath.dentry = newdentry;
+
+ err = ovl_copy_up_data(lowerpath, &upperpath, stat->size);
+ if (err)
+ goto out_cleanup;
+ }
+
+ err = ovl_copy_xattr(lowerpath->dentry, newdentry);
+ if (err)
+ goto out_cleanup;
+
+ mutex_lock(&newdentry->d_inode->i_mutex);
+ err = ovl_set_attr(newdentry, stat);
+ if (!err && attr)
+ err = notify_change(newdentry, attr, NULL);
+ mutex_unlock(&newdentry->d_inode->i_mutex);
+ if (err)
+ goto out_cleanup;
+
+ err = ovl_do_rename(wdir, newdentry, udir, upper, 0);
+ if (err)
+ goto out_cleanup;
+
+ ovl_dentry_update(dentry, newdentry);
+ newdentry = NULL;
+
+ /*
+ * Non-directores become opaque when copied up.
+ */
+ if (!S_ISDIR(stat->mode))
+ ovl_dentry_set_opaque(dentry, true);
+out2:
+ dput(upper);
+out1:
+ dput(newdentry);
+out:
+ return err;
+
+out_cleanup:
+ ovl_cleanup(wdir, newdentry);
+ goto out;
+}
+
+/*
+ * Copy up a single dentry
+ *
+ * Directory renames only allowed on "pure upper" (already created on
+ * upper filesystem, never copied up). Directories which are on lower or
+ * are merged may not be renamed. For these -EXDEV is returned and
+ * userspace has to deal with it. This means, when copying up a
+ * directory we can rely on it and ancestors being stable.
+ *
+ * Non-directory renames start with copy up of source if necessary. The
+ * actual rename will only proceed once the copy up was successful. Copy
+ * up uses upper parent i_mutex for exclusion. Since rename can change
+ * d_parent it is possible that the copy up will lock the old parent. At
+ * that point the file will have already been copied up anyway.
+ */
+int ovl_copy_up_one(struct dentry *parent, struct dentry *dentry,
+ struct path *lowerpath, struct kstat *stat,
+ struct iattr *attr)
+{
+ struct dentry *workdir = ovl_workdir(dentry);
+ int err;
+ struct kstat pstat;
+ struct path parentpath;
+ struct dentry *upperdir;
+ struct dentry *upperdentry;
+ const struct cred *old_cred;
+ struct cred *override_cred;
+ char *link = NULL;
+
+ ovl_path_upper(parent, &parentpath);
+ upperdir = parentpath.dentry;
+
+ err = vfs_getattr(&parentpath, &pstat);
+ if (err)
+ return err;
+
+ if (S_ISLNK(stat->mode)) {
+ link = ovl_read_symlink(lowerpath->dentry);
+ if (IS_ERR(link))
+ return PTR_ERR(link);
+ }
+
+ err = -ENOMEM;
+ override_cred = prepare_creds();
+ if (!override_cred)
+ goto out_free_link;
+
+ override_cred->fsuid = stat->uid;
+ override_cred->fsgid = stat->gid;
+ /*
+ * CAP_SYS_ADMIN for copying up extended attributes
+ * CAP_DAC_OVERRIDE for create
+ * CAP_FOWNER for chmod, timestamp update
+ * CAP_FSETID for chmod
+ * CAP_CHOWN for chown
+ * CAP_MKNOD for mknod
+ */
+ cap_raise(override_cred->cap_effective, CAP_SYS_ADMIN);
+ cap_raise(override_cred->cap_effective, CAP_DAC_OVERRIDE);
+ cap_raise(override_cred->cap_effective, CAP_FOWNER);
+ cap_raise(override_cred->cap_effective, CAP_FSETID);
+ cap_raise(override_cred->cap_effective, CAP_CHOWN);
+ cap_raise(override_cred->cap_effective, CAP_MKNOD);
+ old_cred = override_creds(override_cred);
+
+ err = -EIO;
+ if (lock_rename(workdir, upperdir) != NULL) {
+ pr_err("overlayfs: failed to lock workdir+upperdir\n");
+ goto out_unlock;
+ }
+ upperdentry = ovl_dentry_upper(dentry);
+ if (upperdentry) {
+ unlock_rename(workdir, upperdir);
+ err = 0;
+ /* Raced with another copy-up? Do the setattr here */
+ if (attr) {
+ mutex_lock(&upperdentry->d_inode->i_mutex);
+ err = notify_change(upperdentry, attr, NULL);
+ mutex_unlock(&upperdentry->d_inode->i_mutex);
+ }
+ goto out_put_cred;
+ }
+
+ err = ovl_copy_up_locked(workdir, upperdir, dentry, lowerpath,
+ stat, attr, link);
+ if (!err) {
+ /* Restore timestamps on parent (best effort) */
+ ovl_set_timestamps(upperdir, &pstat);
+ }
+out_unlock:
+ unlock_rename(workdir, upperdir);
+out_put_cred:
+ revert_creds(old_cred);
+ put_cred(override_cred);
+
+out_free_link:
+ if (link)
+ free_page((unsigned long) link);
+
+ return err;
+}
+
+int ovl_copy_up(struct dentry *dentry)
+{
+ int err;
+
+ err = 0;
+ while (!err) {
+ struct dentry *next;
+ struct dentry *parent;
+ struct path lowerpath;
+ struct kstat stat;
+ enum ovl_path_type type = ovl_path_type(dentry);
+
+ if (type != OVL_PATH_LOWER)
+ break;
+
+ next = dget(dentry);
+ /* find the topmost dentry not yet copied up */
+ for (;;) {
+ parent = dget_parent(next);
+
+ type = ovl_path_type(parent);
+ if (type != OVL_PATH_LOWER)
+ break;
+
+ dput(next);
+ next = parent;
+ }
+
+ ovl_path_lower(next, &lowerpath);
+ err = vfs_getattr(&lowerpath, &stat);
+ if (!err)
+ err = ovl_copy_up_one(parent, next, &lowerpath, &stat, NULL);
+
+ dput(parent);
+ dput(next);
+ }
+
+ return err;
+}
--- /dev/null
+/*
+ *
+ * Copyright (C) 2011 Novell Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/fs.h>
+#include <linux/namei.h>
+#include <linux/xattr.h>
+#include <linux/security.h>
+#include <linux/cred.h>
+#include "overlayfs.h"
+
+void ovl_cleanup(struct inode *wdir, struct dentry *wdentry)
+{
+ int err;
+
+ dget(wdentry);
+ if (S_ISDIR(wdentry->d_inode->i_mode))
+ err = ovl_do_rmdir(wdir, wdentry);
+ else
+ err = ovl_do_unlink(wdir, wdentry);
+ dput(wdentry);
+
+ if (err) {
+ pr_err("overlayfs: cleanup of '%pd2' failed (%i)\n",
+ wdentry, err);
+ }
+}
+
+struct dentry *ovl_lookup_temp(struct dentry *workdir, struct dentry *dentry)
+{
+ struct dentry *temp;
+ char name[20];
+
+ snprintf(name, sizeof(name), "#%lx", (unsigned long) dentry);
+
+ temp = lookup_one_len(name, workdir, strlen(name));
+ if (!IS_ERR(temp) && temp->d_inode) {
+ pr_err("overlayfs: workdir/%s already exists\n", name);
+ dput(temp);
+ temp = ERR_PTR(-EIO);
+ }
+
+ return temp;
+}
+
+/* caller holds i_mutex on workdir */
+static struct dentry *ovl_whiteout(struct dentry *workdir,
+ struct dentry *dentry)
+{
+ int err;
+ struct dentry *whiteout;
+ struct inode *wdir = workdir->d_inode;
+
+ whiteout = ovl_lookup_temp(workdir, dentry);
+ if (IS_ERR(whiteout))
+ return whiteout;
+
+ err = ovl_do_whiteout(wdir, whiteout);
+ if (err) {
+ dput(whiteout);
+ whiteout = ERR_PTR(err);
+ }
+
+ return whiteout;
+}
+
+int ovl_create_real(struct inode *dir, struct dentry *newdentry,
+ struct kstat *stat, const char *link,
+ struct dentry *hardlink, bool debug)
+{
+ int err;
+
+ if (newdentry->d_inode)
+ return -ESTALE;
+
+ if (hardlink) {
+ err = ovl_do_link(hardlink, dir, newdentry, debug);
+ } else {
+ switch (stat->mode & S_IFMT) {
+ case S_IFREG:
+ err = ovl_do_create(dir, newdentry, stat->mode, debug);
+ break;
+
+ case S_IFDIR:
+ err = ovl_do_mkdir(dir, newdentry, stat->mode, debug);
+ break;
+
+ case S_IFCHR:
+ case S_IFBLK:
+ case S_IFIFO:
+ case S_IFSOCK:
+ err = ovl_do_mknod(dir, newdentry,
+ stat->mode, stat->rdev, debug);
+ break;
+
+ case S_IFLNK:
+ err = ovl_do_symlink(dir, newdentry, link, debug);
+ break;
+
+ default:
+ err = -EPERM;
+ }
+ }
+ if (!err && WARN_ON(!newdentry->d_inode)) {
+ /*
+ * Not quite sure if non-instantiated dentry is legal or not.
+ * VFS doesn't seem to care so check and warn here.
+ */
+ err = -ENOENT;
+ }
+ return err;
+}
+
+static int ovl_set_opaque(struct dentry *upperdentry)
+{
+ return ovl_do_setxattr(upperdentry, ovl_opaque_xattr, "y", 1, 0);
+}
+
+static void ovl_remove_opaque(struct dentry *upperdentry)
+{
+ int err;
+
+ err = ovl_do_removexattr(upperdentry, ovl_opaque_xattr);
+ if (err) {
+ pr_warn("overlayfs: failed to remove opaque from '%s' (%i)\n",
+ upperdentry->d_name.name, err);
+ }
+}
+
+static int ovl_dir_getattr(struct vfsmount *mnt, struct dentry *dentry,
+ struct kstat *stat)
+{
+ int err;
+ enum ovl_path_type type;
+ struct path realpath;
+
+ type = ovl_path_real(dentry, &realpath);
+ err = vfs_getattr(&realpath, stat);
+ if (err)
+ return err;
+
+ stat->dev = dentry->d_sb->s_dev;
+ stat->ino = dentry->d_inode->i_ino;
+
+ /*
+ * It's probably not worth it to count subdirs to get the
+ * correct link count. nlink=1 seems to pacify 'find' and
+ * other utilities.
+ */
+ if (type == OVL_PATH_MERGE)
+ stat->nlink = 1;
+
+ return 0;
+}
+
+static int ovl_create_upper(struct dentry *dentry, struct inode *inode,
+ struct kstat *stat, const char *link,
+ struct dentry *hardlink)
+{
+ struct dentry *upperdir = ovl_dentry_upper(dentry->d_parent);
+ struct inode *udir = upperdir->d_inode;
+ struct dentry *newdentry;
+ int err;
+
+ mutex_lock_nested(&udir->i_mutex, I_MUTEX_PARENT);
+ newdentry = lookup_one_len(dentry->d_name.name, upperdir,
+ dentry->d_name.len);
+ err = PTR_ERR(newdentry);
+ if (IS_ERR(newdentry))
+ goto out_unlock;
+ err = ovl_create_real(udir, newdentry, stat, link, hardlink, false);
+ if (err)
+ goto out_dput;
+
+ ovl_dentry_version_inc(dentry->d_parent);
+ ovl_dentry_update(dentry, newdentry);
+ ovl_copyattr(newdentry->d_inode, inode);
+ d_instantiate(dentry, inode);
+ newdentry = NULL;
+out_dput:
+ dput(newdentry);
+out_unlock:
+ mutex_unlock(&udir->i_mutex);
+ return err;
+}
+
+static int ovl_lock_rename_workdir(struct dentry *workdir,
+ struct dentry *upperdir)
+{
+ /* Workdir should not be the same as upperdir */
+ if (workdir == upperdir)
+ goto err;
+
+ /* Workdir should not be subdir of upperdir and vice versa */
+ if (lock_rename(workdir, upperdir) != NULL)
+ goto err_unlock;
+
+ return 0;
+
+err_unlock:
+ unlock_rename(workdir, upperdir);
+err:
+ pr_err("overlayfs: failed to lock workdir+upperdir\n");
+ return -EIO;
+}
+
+static struct dentry *ovl_clear_empty(struct dentry *dentry,
+ struct list_head *list)
+{
+ struct dentry *workdir = ovl_workdir(dentry);
+ struct inode *wdir = workdir->d_inode;
+ struct dentry *upperdir = ovl_dentry_upper(dentry->d_parent);
+ struct inode *udir = upperdir->d_inode;
+ struct path upperpath;
+ struct dentry *upper;
+ struct dentry *opaquedir;
+ struct kstat stat;
+ int err;
+
+ err = ovl_lock_rename_workdir(workdir, upperdir);
+ if (err)
+ goto out;
+
+ ovl_path_upper(dentry, &upperpath);
+ err = vfs_getattr(&upperpath, &stat);
+ if (err)
+ goto out_unlock;
+
+ err = -ESTALE;
+ if (!S_ISDIR(stat.mode))
+ goto out_unlock;
+ upper = upperpath.dentry;
+ if (upper->d_parent->d_inode != udir)
+ goto out_unlock;
+
+ opaquedir = ovl_lookup_temp(workdir, dentry);
+ err = PTR_ERR(opaquedir);
+ if (IS_ERR(opaquedir))
+ goto out_unlock;
+
+ err = ovl_create_real(wdir, opaquedir, &stat, NULL, NULL, true);
+ if (err)
+ goto out_dput;
+
+ err = ovl_copy_xattr(upper, opaquedir);
+ if (err)
+ goto out_cleanup;
+
+ err = ovl_set_opaque(opaquedir);
+ if (err)
+ goto out_cleanup;
+
+ mutex_lock(&opaquedir->d_inode->i_mutex);
+ err = ovl_set_attr(opaquedir, &stat);
+ mutex_unlock(&opaquedir->d_inode->i_mutex);
+ if (err)
+ goto out_cleanup;
+
+ err = ovl_do_rename(wdir, opaquedir, udir, upper, RENAME_EXCHANGE);
+ if (err)
+ goto out_cleanup;
+
+ ovl_cleanup_whiteouts(upper, list);
+ ovl_cleanup(wdir, upper);
+ unlock_rename(workdir, upperdir);
+
+ /* dentry's upper doesn't match now, get rid of it */
+ d_drop(dentry);
+
+ return opaquedir;
+
+out_cleanup:
+ ovl_cleanup(wdir, opaquedir);
+out_dput:
+ dput(opaquedir);
+out_unlock:
+ unlock_rename(workdir, upperdir);
+out:
+ return ERR_PTR(err);
+}
+
+static struct dentry *ovl_check_empty_and_clear(struct dentry *dentry)
+{
+ int err;
+ struct dentry *ret = NULL;
+ LIST_HEAD(list);
+
+ err = ovl_check_empty_dir(dentry, &list);
+ if (err)
+ ret = ERR_PTR(err);
+ else {
+ /*
+ * If no upperdentry then skip clearing whiteouts.
+ *
+ * Can race with copy-up, since we don't hold the upperdir
+ * mutex. Doesn't matter, since copy-up can't create a
+ * non-empty directory from an empty one.
+ */
+ if (ovl_dentry_upper(dentry))
+ ret = ovl_clear_empty(dentry, &list);
+ }
+
+ ovl_cache_free(&list);
+
+ return ret;
+}
+
+static int ovl_create_over_whiteout(struct dentry *dentry, struct inode *inode,
+ struct kstat *stat, const char *link,
+ struct dentry *hardlink)
+{
+ struct dentry *workdir = ovl_workdir(dentry);
+ struct inode *wdir = workdir->d_inode;
+ struct dentry *upperdir = ovl_dentry_upper(dentry->d_parent);
+ struct inode *udir = upperdir->d_inode;
+ struct dentry *upper;
+ struct dentry *newdentry;
+ int err;
+
+ err = ovl_lock_rename_workdir(workdir, upperdir);
+ if (err)
+ goto out;
+
+ newdentry = ovl_lookup_temp(workdir, dentry);
+ err = PTR_ERR(newdentry);
+ if (IS_ERR(newdentry))
+ goto out_unlock;
+
+ upper = lookup_one_len(dentry->d_name.name, upperdir,
+ dentry->d_name.len);
+ err = PTR_ERR(upper);
+ if (IS_ERR(upper))
+ goto out_dput;
+
+ err = ovl_create_real(wdir, newdentry, stat, link, hardlink, true);
+ if (err)
+ goto out_dput2;
+
+ if (S_ISDIR(stat->mode)) {
+ err = ovl_set_opaque(newdentry);
+ if (err)
+ goto out_cleanup;
+
+ err = ovl_do_rename(wdir, newdentry, udir, upper,
+ RENAME_EXCHANGE);
+ if (err)
+ goto out_cleanup;
+
+ ovl_cleanup(wdir, upper);
+ } else {
+ err = ovl_do_rename(wdir, newdentry, udir, upper, 0);
+ if (err)
+ goto out_cleanup;
+ }
+ ovl_dentry_version_inc(dentry->d_parent);
+ ovl_dentry_update(dentry, newdentry);
+ ovl_copyattr(newdentry->d_inode, inode);
+ d_instantiate(dentry, inode);
+ newdentry = NULL;
+out_dput2:
+ dput(upper);
+out_dput:
+ dput(newdentry);
+out_unlock:
+ unlock_rename(workdir, upperdir);
+out:
+ return err;
+
+out_cleanup:
+ ovl_cleanup(wdir, newdentry);
+ goto out_dput2;
+}
+
+static int ovl_create_or_link(struct dentry *dentry, int mode, dev_t rdev,
+ const char *link, struct dentry *hardlink)
+{
+ int err;
+ struct inode *inode;
+ struct kstat stat = {
+ .mode = mode,
+ .rdev = rdev,
+ };
+
+ err = -ENOMEM;
+ inode = ovl_new_inode(dentry->d_sb, mode, dentry->d_fsdata);
+ if (!inode)
+ goto out;
+
+ err = ovl_copy_up(dentry->d_parent);
+ if (err)
+ goto out_iput;
+
+ if (!ovl_dentry_is_opaque(dentry)) {
+ err = ovl_create_upper(dentry, inode, &stat, link, hardlink);
+ } else {
+ const struct cred *old_cred;
+ struct cred *override_cred;
+
+ err = -ENOMEM;
+ override_cred = prepare_creds();
+ if (!override_cred)
+ goto out_iput;
+
+ /*
+ * CAP_SYS_ADMIN for setting opaque xattr
+ * CAP_DAC_OVERRIDE for create in workdir, rename
+ * CAP_FOWNER for removing whiteout from sticky dir
+ */
+ cap_raise(override_cred->cap_effective, CAP_SYS_ADMIN);
+ cap_raise(override_cred->cap_effective, CAP_DAC_OVERRIDE);
+ cap_raise(override_cred->cap_effective, CAP_FOWNER);
+ old_cred = override_creds(override_cred);
+
+ err = ovl_create_over_whiteout(dentry, inode, &stat, link,
+ hardlink);
+
+ revert_creds(old_cred);
+ put_cred(override_cred);
+ }
+
+ if (!err)
+ inode = NULL;
+out_iput:
+ iput(inode);
+out:
+ return err;
+}
+
+static int ovl_create_object(struct dentry *dentry, int mode, dev_t rdev,
+ const char *link)
+{
+ int err;
+
+ err = ovl_want_write(dentry);
+ if (!err) {
+ err = ovl_create_or_link(dentry, mode, rdev, link, NULL);
+ ovl_drop_write(dentry);
+ }
+
+ return err;
+}
+
+static int ovl_create(struct inode *dir, struct dentry *dentry, umode_t mode,
+ bool excl)
+{
+ return ovl_create_object(dentry, (mode & 07777) | S_IFREG, 0, NULL);
+}
+
+static int ovl_mkdir(struct inode *dir, struct dentry *dentry, umode_t mode)
+{
+ return ovl_create_object(dentry, (mode & 07777) | S_IFDIR, 0, NULL);
+}
+
+static int ovl_mknod(struct inode *dir, struct dentry *dentry, umode_t mode,
+ dev_t rdev)
+{
+ /* Don't allow creation of "whiteout" on overlay */
+ if (S_ISCHR(mode) && rdev == WHITEOUT_DEV)
+ return -EPERM;
+
+ return ovl_create_object(dentry, mode, rdev, NULL);
+}
+
+static int ovl_symlink(struct inode *dir, struct dentry *dentry,
+ const char *link)
+{
+ return ovl_create_object(dentry, S_IFLNK, 0, link);
+}
+
+static int ovl_link(struct dentry *old, struct inode *newdir,
+ struct dentry *new)
+{
+ int err;
+ struct dentry *upper;
+
+ err = ovl_want_write(old);
+ if (err)
+ goto out;
+
+ err = ovl_copy_up(old);
+ if (err)
+ goto out_drop_write;
+
+ upper = ovl_dentry_upper(old);
+ err = ovl_create_or_link(new, upper->d_inode->i_mode, 0, NULL, upper);
+
+out_drop_write:
+ ovl_drop_write(old);
+out:
+ return err;
+}
+
+static int ovl_remove_and_whiteout(struct dentry *dentry, bool is_dir)
+{
+ struct dentry *workdir = ovl_workdir(dentry);
+ struct inode *wdir = workdir->d_inode;
+ struct dentry *upperdir = ovl_dentry_upper(dentry->d_parent);
+ struct inode *udir = upperdir->d_inode;
+ struct dentry *whiteout;
+ struct dentry *upper;
+ struct dentry *opaquedir = NULL;
+ int err;
+
+ if (is_dir) {
+ opaquedir = ovl_check_empty_and_clear(dentry);
+ err = PTR_ERR(opaquedir);
+ if (IS_ERR(opaquedir))
+ goto out;
+ }
+
+ err = ovl_lock_rename_workdir(workdir, upperdir);
+ if (err)
+ goto out_dput;
+
+ whiteout = ovl_whiteout(workdir, dentry);
+ err = PTR_ERR(whiteout);
+ if (IS_ERR(whiteout))
+ goto out_unlock;
+
+ upper = ovl_dentry_upper(dentry);
+ if (!upper) {
+ upper = lookup_one_len(dentry->d_name.name, upperdir,
+ dentry->d_name.len);
+ err = PTR_ERR(upper);
+ if (IS_ERR(upper))
+ goto kill_whiteout;
+
+ err = ovl_do_rename(wdir, whiteout, udir, upper, 0);
+ dput(upper);
+ if (err)
+ goto kill_whiteout;
+ } else {
+ int flags = 0;
+
+ if (opaquedir)
+ upper = opaquedir;
+ err = -ESTALE;
+ if (upper->d_parent != upperdir)
+ goto kill_whiteout;
+
+ if (is_dir)
+ flags |= RENAME_EXCHANGE;
+
+ err = ovl_do_rename(wdir, whiteout, udir, upper, flags);
+ if (err)
+ goto kill_whiteout;
+
+ if (is_dir)
+ ovl_cleanup(wdir, upper);
+ }
+ ovl_dentry_version_inc(dentry->d_parent);
+out_d_drop:
+ d_drop(dentry);
+ dput(whiteout);
+out_unlock:
+ unlock_rename(workdir, upperdir);
+out_dput:
+ dput(opaquedir);
+out:
+ return err;
+
+kill_whiteout:
+ ovl_cleanup(wdir, whiteout);
+ goto out_d_drop;
+}
+
+static int ovl_remove_upper(struct dentry *dentry, bool is_dir)
+{
+ struct dentry *upperdir = ovl_dentry_upper(dentry->d_parent);
+ struct inode *dir = upperdir->d_inode;
+ struct dentry *upper = ovl_dentry_upper(dentry);
+ int err;
+
+ mutex_lock_nested(&dir->i_mutex, I_MUTEX_PARENT);
+ err = -ESTALE;
+ if (upper->d_parent == upperdir) {
+ /* Don't let d_delete() think it can reset d_inode */
+ dget(upper);
+ if (is_dir)
+ err = vfs_rmdir(dir, upper);
+ else
+ err = vfs_unlink(dir, upper, NULL);
+ dput(upper);
+ ovl_dentry_version_inc(dentry->d_parent);
+ }
+
+ /*
+ * Keeping this dentry hashed would mean having to release
+ * upperpath/lowerpath, which could only be done if we are the
+ * sole user of this dentry. Too tricky... Just unhash for
+ * now.
+ */
+ d_drop(dentry);
+ mutex_unlock(&dir->i_mutex);
+
+ return err;
+}
+
+static inline int ovl_check_sticky(struct dentry *dentry)
+{
+ struct inode *dir = ovl_dentry_real(dentry->d_parent)->d_inode;
+ struct inode *inode = ovl_dentry_real(dentry)->d_inode;
+
+ if (check_sticky(dir, inode))
+ return -EPERM;
+
+ return 0;
+}
+
+static int ovl_do_remove(struct dentry *dentry, bool is_dir)
+{
+ enum ovl_path_type type;
+ int err;
+
+ err = ovl_check_sticky(dentry);
+ if (err)
+ goto out;
+
+ err = ovl_want_write(dentry);
+ if (err)
+ goto out;
+
+ err = ovl_copy_up(dentry->d_parent);
+ if (err)
+ goto out_drop_write;
+
+ type = ovl_path_type(dentry);
+ if (type == OVL_PATH_PURE_UPPER) {
+ err = ovl_remove_upper(dentry, is_dir);
+ } else {
+ const struct cred *old_cred;
+ struct cred *override_cred;
+
+ err = -ENOMEM;
+ override_cred = prepare_creds();
+ if (!override_cred)
+ goto out_drop_write;
+
+ /*
+ * CAP_SYS_ADMIN for setting xattr on whiteout, opaque dir
+ * CAP_DAC_OVERRIDE for create in workdir, rename
+ * CAP_FOWNER for removing whiteout from sticky dir
+ * CAP_FSETID for chmod of opaque dir
+ * CAP_CHOWN for chown of opaque dir
+ */
+ cap_raise(override_cred->cap_effective, CAP_SYS_ADMIN);
+ cap_raise(override_cred->cap_effective, CAP_DAC_OVERRIDE);
+ cap_raise(override_cred->cap_effective, CAP_FOWNER);
+ cap_raise(override_cred->cap_effective, CAP_FSETID);
+ cap_raise(override_cred->cap_effective, CAP_CHOWN);
+ old_cred = override_creds(override_cred);
+
+ err = ovl_remove_and_whiteout(dentry, is_dir);
+
+ revert_creds(old_cred);
+ put_cred(override_cred);
+ }
+out_drop_write:
+ ovl_drop_write(dentry);
+out:
+ return err;
+}
+
+static int ovl_unlink(struct inode *dir, struct dentry *dentry)
+{
+ return ovl_do_remove(dentry, false);
+}
+
+static int ovl_rmdir(struct inode *dir, struct dentry *dentry)
+{
+ return ovl_do_remove(dentry, true);
+}
+
+static int ovl_rename2(struct inode *olddir, struct dentry *old,
+ struct inode *newdir, struct dentry *new,
+ unsigned int flags)
+{
+ int err;
+ enum ovl_path_type old_type;
+ enum ovl_path_type new_type;
+ struct dentry *old_upperdir;
+ struct dentry *new_upperdir;
+ struct dentry *olddentry;
+ struct dentry *newdentry;
+ struct dentry *trap;
+ bool old_opaque;
+ bool new_opaque;
+ bool new_create = false;
+ bool cleanup_whiteout = false;
+ bool overwrite = !(flags & RENAME_EXCHANGE);
+ bool is_dir = S_ISDIR(old->d_inode->i_mode);
+ bool new_is_dir = false;
+ struct dentry *opaquedir = NULL;
+ const struct cred *old_cred = NULL;
+ struct cred *override_cred = NULL;
+
+ err = -EINVAL;
+ if (flags & ~(RENAME_EXCHANGE | RENAME_NOREPLACE))
+ goto out;
+
+ flags &= ~RENAME_NOREPLACE;
+
+ err = ovl_check_sticky(old);
+ if (err)
+ goto out;
+
+ /* Don't copy up directory trees */
+ old_type = ovl_path_type(old);
+ err = -EXDEV;
+ if ((old_type == OVL_PATH_LOWER || old_type == OVL_PATH_MERGE) && is_dir)
+ goto out;
+
+ if (new->d_inode) {
+ err = ovl_check_sticky(new);
+ if (err)
+ goto out;
+
+ if (S_ISDIR(new->d_inode->i_mode))
+ new_is_dir = true;
+
+ new_type = ovl_path_type(new);
+ err = -EXDEV;
+ if (!overwrite && (new_type == OVL_PATH_LOWER || new_type == OVL_PATH_MERGE) && new_is_dir)
+ goto out;
+
+ err = 0;
+ if (new_type == OVL_PATH_LOWER && old_type == OVL_PATH_LOWER) {
+ if (ovl_dentry_lower(old)->d_inode ==
+ ovl_dentry_lower(new)->d_inode)
+ goto out;
+ }
+ if (new_type != OVL_PATH_LOWER && old_type != OVL_PATH_LOWER) {
+ if (ovl_dentry_upper(old)->d_inode ==
+ ovl_dentry_upper(new)->d_inode)
+ goto out;
+ }
+ } else {
+ if (ovl_dentry_is_opaque(new))
+ new_type = OVL_PATH_UPPER;
+ else
+ new_type = OVL_PATH_PURE_UPPER;
+ }
+
+ err = ovl_want_write(old);
+ if (err)
+ goto out;
+
+ err = ovl_copy_up(old);
+ if (err)
+ goto out_drop_write;
+
+ err = ovl_copy_up(new->d_parent);
+ if (err)
+ goto out_drop_write;
+ if (!overwrite) {
+ err = ovl_copy_up(new);
+ if (err)
+ goto out_drop_write;
+ }
+
+ old_opaque = old_type != OVL_PATH_PURE_UPPER;
+ new_opaque = new_type != OVL_PATH_PURE_UPPER;
+
+ if (old_opaque || new_opaque) {
+ err = -ENOMEM;
+ override_cred = prepare_creds();
+ if (!override_cred)
+ goto out_drop_write;
+
+ /*
+ * CAP_SYS_ADMIN for setting xattr on whiteout, opaque dir
+ * CAP_DAC_OVERRIDE for create in workdir
+ * CAP_FOWNER for removing whiteout from sticky dir
+ * CAP_FSETID for chmod of opaque dir
+ * CAP_CHOWN for chown of opaque dir
+ */
+ cap_raise(override_cred->cap_effective, CAP_SYS_ADMIN);
+ cap_raise(override_cred->cap_effective, CAP_DAC_OVERRIDE);
+ cap_raise(override_cred->cap_effective, CAP_FOWNER);
+ cap_raise(override_cred->cap_effective, CAP_FSETID);
+ cap_raise(override_cred->cap_effective, CAP_CHOWN);
+ old_cred = override_creds(override_cred);
+ }
+
+ if (overwrite && (new_type == OVL_PATH_LOWER || new_type == OVL_PATH_MERGE) && new_is_dir) {
+ opaquedir = ovl_check_empty_and_clear(new);
+ err = PTR_ERR(opaquedir);
+ if (IS_ERR(opaquedir)) {
+ opaquedir = NULL;
+ goto out_revert_creds;
+ }
+ }
+
+ if (overwrite) {
+ if (old_opaque) {
+ if (new->d_inode || !new_opaque) {
+ /* Whiteout source */
+ flags |= RENAME_WHITEOUT;
+ } else {
+ /* Switch whiteouts */
+ flags |= RENAME_EXCHANGE;
+ }
+ } else if (is_dir && !new->d_inode && new_opaque) {
+ flags |= RENAME_EXCHANGE;
+ cleanup_whiteout = true;
+ }
+ }
+
+ old_upperdir = ovl_dentry_upper(old->d_parent);
+ new_upperdir = ovl_dentry_upper(new->d_parent);
+
+ trap = lock_rename(new_upperdir, old_upperdir);
+
+ olddentry = ovl_dentry_upper(old);
+ newdentry = ovl_dentry_upper(new);
+ if (newdentry) {
+ if (opaquedir) {
+ newdentry = opaquedir;
+ opaquedir = NULL;
+ } else {
+ dget(newdentry);
+ }
+ } else {
+ new_create = true;
+ newdentry = lookup_one_len(new->d_name.name, new_upperdir,
+ new->d_name.len);
+ err = PTR_ERR(newdentry);
+ if (IS_ERR(newdentry))
+ goto out_unlock;
+ }
+
+ err = -ESTALE;
+ if (olddentry->d_parent != old_upperdir)
+ goto out_dput;
+ if (newdentry->d_parent != new_upperdir)
+ goto out_dput;
+ if (olddentry == trap)
+ goto out_dput;
+ if (newdentry == trap)
+ goto out_dput;
+
+ if (is_dir && !old_opaque && new_opaque) {
+ err = ovl_set_opaque(olddentry);
+ if (err)
+ goto out_dput;
+ }
+ if (!overwrite && new_is_dir && old_opaque && !new_opaque) {
+ err = ovl_set_opaque(newdentry);
+ if (err)
+ goto out_dput;
+ }
+
+ if (old_opaque || new_opaque) {
+ err = ovl_do_rename(old_upperdir->d_inode, olddentry,
+ new_upperdir->d_inode, newdentry,
+ flags);
+ } else {
+ /* No debug for the plain case */
+ BUG_ON(flags & ~RENAME_EXCHANGE);
+ err = vfs_rename(old_upperdir->d_inode, olddentry,
+ new_upperdir->d_inode, newdentry,
+ NULL, flags);
+ }
+
+ if (err) {
+ if (is_dir && !old_opaque && new_opaque)
+ ovl_remove_opaque(olddentry);
+ if (!overwrite && new_is_dir && old_opaque && !new_opaque)
+ ovl_remove_opaque(newdentry);
+ goto out_dput;
+ }
+
+ if (is_dir && old_opaque && !new_opaque)
+ ovl_remove_opaque(olddentry);
+ if (!overwrite && new_is_dir && !old_opaque && new_opaque)
+ ovl_remove_opaque(newdentry);
+
+ if (old_opaque != new_opaque) {
+ ovl_dentry_set_opaque(old, new_opaque);
+ if (!overwrite)
+ ovl_dentry_set_opaque(new, old_opaque);
+ }
+
+ if (cleanup_whiteout)
+ ovl_cleanup(old_upperdir->d_inode, newdentry);
+
+ ovl_dentry_version_inc(old->d_parent);
+ ovl_dentry_version_inc(new->d_parent);
+
+out_dput:
+ dput(newdentry);
+out_unlock:
+ unlock_rename(new_upperdir, old_upperdir);
+out_revert_creds:
+ if (old_opaque || new_opaque) {
+ revert_creds(old_cred);
+ put_cred(override_cred);
+ }
+out_drop_write:
+ ovl_drop_write(old);
+out:
+ dput(opaquedir);
+ return err;
+}
+
+const struct inode_operations ovl_dir_inode_operations = {
+ .lookup = ovl_lookup,
+ .mkdir = ovl_mkdir,
+ .symlink = ovl_symlink,
+ .unlink = ovl_unlink,
+ .rmdir = ovl_rmdir,
+ .rename2 = ovl_rename2,
+ .link = ovl_link,
+ .setattr = ovl_setattr,
+ .create = ovl_create,
+ .mknod = ovl_mknod,
+ .permission = ovl_permission,
+ .getattr = ovl_dir_getattr,
+ .setxattr = ovl_setxattr,
+ .getxattr = ovl_getxattr,
+ .listxattr = ovl_listxattr,
+ .removexattr = ovl_removexattr,
+};
--- /dev/null
+/*
+ *
+ * Copyright (C) 2011 Novell Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/xattr.h>
+#include "overlayfs.h"
+
+static int ovl_copy_up_last(struct dentry *dentry, struct iattr *attr,
+ bool no_data)
+{
+ int err;
+ struct dentry *parent;
+ struct kstat stat;
+ struct path lowerpath;
+
+ parent = dget_parent(dentry);
+ err = ovl_copy_up(parent);
+ if (err)
+ goto out_dput_parent;
+
+ ovl_path_lower(dentry, &lowerpath);
+ err = vfs_getattr(&lowerpath, &stat);
+ if (err)
+ goto out_dput_parent;
+
+ if (no_data)
+ stat.size = 0;
+
+ err = ovl_copy_up_one(parent, dentry, &lowerpath, &stat, attr);
+
+out_dput_parent:
+ dput(parent);
+ return err;
+}
+
+int ovl_setattr(struct dentry *dentry, struct iattr *attr)
+{
+ int err;
+ struct dentry *upperdentry;
+
+ err = ovl_want_write(dentry);
+ if (err)
+ goto out;
+
+ upperdentry = ovl_dentry_upper(dentry);
+ if (upperdentry) {
+ mutex_lock(&upperdentry->d_inode->i_mutex);
+ err = notify_change(upperdentry, attr, NULL);
+ mutex_unlock(&upperdentry->d_inode->i_mutex);
+ } else {
+ err = ovl_copy_up_last(dentry, attr, false);
+ }
+ ovl_drop_write(dentry);
+out:
+ return err;
+}
+
+static int ovl_getattr(struct vfsmount *mnt, struct dentry *dentry,
+ struct kstat *stat)
+{
+ struct path realpath;
+
+ ovl_path_real(dentry, &realpath);
+ return vfs_getattr(&realpath, stat);
+}
+
+int ovl_permission(struct inode *inode, int mask)
+{
+ struct ovl_entry *oe;
+ struct dentry *alias = NULL;
+ struct inode *realinode;
+ struct dentry *realdentry;
+ bool is_upper;
+ int err;
+
+ if (S_ISDIR(inode->i_mode)) {
+ oe = inode->i_private;
+ } else if (mask & MAY_NOT_BLOCK) {
+ return -ECHILD;
+ } else {
+ /*
+ * For non-directories find an alias and get the info
+ * from there.
+ */
+ alias = d_find_any_alias(inode);
+ if (WARN_ON(!alias))
+ return -ENOENT;
+
+ oe = alias->d_fsdata;
+ }
+
+ realdentry = ovl_entry_real(oe, &is_upper);
+
+ /* Careful in RCU walk mode */
+ realinode = ACCESS_ONCE(realdentry->d_inode);
+ if (!realinode) {
+ WARN_ON(!(mask & MAY_NOT_BLOCK));
+ err = -ENOENT;
+ goto out_dput;
+ }
+
+ if (mask & MAY_WRITE) {
+ umode_t mode = realinode->i_mode;
+
+ /*
+ * Writes will always be redirected to upper layer, so
+ * ignore lower layer being read-only.
+ *
+ * If the overlay itself is read-only then proceed
+ * with the permission check, don't return EROFS.
+ * This will only happen if this is the lower layer of
+ * another overlayfs.
+ *
+ * If upper fs becomes read-only after the overlay was
+ * constructed return EROFS to prevent modification of
+ * upper layer.
+ */
+ err = -EROFS;
+ if (is_upper && !IS_RDONLY(inode) && IS_RDONLY(realinode) &&
+ (S_ISREG(mode) || S_ISDIR(mode) || S_ISLNK(mode)))
+ goto out_dput;
+ }
+
+ err = __inode_permission(realinode, mask);
+out_dput:
+ dput(alias);
+ return err;
+}
+
+
+struct ovl_link_data {
+ struct dentry *realdentry;
+ void *cookie;
+};
+
+static void *ovl_follow_link(struct dentry *dentry, struct nameidata *nd)
+{
+ void *ret;
+ struct dentry *realdentry;
+ struct inode *realinode;
+
+ realdentry = ovl_dentry_real(dentry);
+ realinode = realdentry->d_inode;
+
+ if (WARN_ON(!realinode->i_op->follow_link))
+ return ERR_PTR(-EPERM);
+
+ ret = realinode->i_op->follow_link(realdentry, nd);
+ if (IS_ERR(ret))
+ return ret;
+
+ if (realinode->i_op->put_link) {
+ struct ovl_link_data *data;
+
+ data = kmalloc(sizeof(struct ovl_link_data), GFP_KERNEL);
+ if (!data) {
+ realinode->i_op->put_link(realdentry, nd, ret);
+ return ERR_PTR(-ENOMEM);
+ }
+ data->realdentry = realdentry;
+ data->cookie = ret;
+
+ return data;
+ } else {
+ return NULL;
+ }
+}
+
+static void ovl_put_link(struct dentry *dentry, struct nameidata *nd, void *c)
+{
+ struct inode *realinode;
+ struct ovl_link_data *data = c;
+
+ if (!data)
+ return;
+
+ realinode = data->realdentry->d_inode;
+ realinode->i_op->put_link(data->realdentry, nd, data->cookie);
+ kfree(data);
+}
+
+static int ovl_readlink(struct dentry *dentry, char __user *buf, int bufsiz)
+{
+ struct path realpath;
+ struct inode *realinode;
+
+ ovl_path_real(dentry, &realpath);
+ realinode = realpath.dentry->d_inode;
+
+ if (!realinode->i_op->readlink)
+ return -EINVAL;
+
+ touch_atime(&realpath);
+
+ return realinode->i_op->readlink(realpath.dentry, buf, bufsiz);
+}
+
+
+static bool ovl_is_private_xattr(const char *name)
+{
+ return strncmp(name, "trusted.overlay.", 14) == 0;
+}
+
+int ovl_setxattr(struct dentry *dentry, const char *name,
+ const void *value, size_t size, int flags)
+{
+ int err;
+ struct dentry *upperdentry;
+
+ err = ovl_want_write(dentry);
+ if (err)
+ goto out;
+
+ err = -EPERM;
+ if (ovl_is_private_xattr(name))
+ goto out_drop_write;
+
+ err = ovl_copy_up(dentry);
+ if (err)
+ goto out_drop_write;
+
+ upperdentry = ovl_dentry_upper(dentry);
+ err = vfs_setxattr(upperdentry, name, value, size, flags);
+
+out_drop_write:
+ ovl_drop_write(dentry);
+out:
+ return err;
+}
+
+static bool ovl_need_xattr_filter(struct dentry *dentry,
+ enum ovl_path_type type)
+{
+ return type == OVL_PATH_UPPER && S_ISDIR(dentry->d_inode->i_mode);
+}
+
+ssize_t ovl_getxattr(struct dentry *dentry, const char *name,
+ void *value, size_t size)
+{
+ struct path realpath;
+ enum ovl_path_type type = ovl_path_real(dentry, &realpath);
+
+ if (ovl_need_xattr_filter(dentry, type) && ovl_is_private_xattr(name))
+ return -ENODATA;
+
+ return vfs_getxattr(realpath.dentry, name, value, size);
+}
+
+ssize_t ovl_listxattr(struct dentry *dentry, char *list, size_t size)
+{
+ struct path realpath;
+ enum ovl_path_type type = ovl_path_real(dentry, &realpath);
+ ssize_t res;
+ int off;
+
+ res = vfs_listxattr(realpath.dentry, list, size);
+ if (res <= 0 || size == 0)
+ return res;
+
+ if (!ovl_need_xattr_filter(dentry, type))
+ return res;
+
+ /* filter out private xattrs */
+ for (off = 0; off < res;) {
+ char *s = list + off;
+ size_t slen = strlen(s) + 1;
+
+ BUG_ON(off + slen > res);
+
+ if (ovl_is_private_xattr(s)) {
+ res -= slen;
+ memmove(s, s + slen, res - off);
+ } else {
+ off += slen;
+ }
+ }
+
+ return res;
+}
+
+int ovl_removexattr(struct dentry *dentry, const char *name)
+{
+ int err;
+ struct path realpath;
+ enum ovl_path_type type = ovl_path_real(dentry, &realpath);
+
+ err = ovl_want_write(dentry);
+ if (err)
+ goto out;
+
+ err = -ENODATA;
+ if (ovl_need_xattr_filter(dentry, type) && ovl_is_private_xattr(name))
+ goto out_drop_write;
+
+ if (type == OVL_PATH_LOWER) {
+ err = vfs_getxattr(realpath.dentry, name, NULL, 0);
+ if (err < 0)
+ goto out_drop_write;
+
+ err = ovl_copy_up(dentry);
+ if (err)
+ goto out_drop_write;
+
+ ovl_path_upper(dentry, &realpath);
+ }
+
+ err = vfs_removexattr(realpath.dentry, name);
+out_drop_write:
+ ovl_drop_write(dentry);
+out:
+ return err;
+}
+
+static bool ovl_open_need_copy_up(int flags, enum ovl_path_type type,
+ struct dentry *realdentry)
+{
+ if (type != OVL_PATH_LOWER)
+ return false;
+
+ if (special_file(realdentry->d_inode->i_mode))
+ return false;
+
+ if (!(OPEN_FMODE(flags) & FMODE_WRITE) && !(flags & O_TRUNC))
+ return false;
+
+ return true;
+}
+
+static int ovl_dentry_open(struct dentry *dentry, struct file *file,
+ const struct cred *cred)
+{
+ int err;
+ struct path realpath;
+ enum ovl_path_type type;
+ bool want_write = false;
+
+ type = ovl_path_real(dentry, &realpath);
+ if (ovl_open_need_copy_up(file->f_flags, type, realpath.dentry)) {
+ want_write = true;
+ err = ovl_want_write(dentry);
+ if (err)
+ goto out;
+
+ if (file->f_flags & O_TRUNC)
+ err = ovl_copy_up_last(dentry, NULL, true);
+ else
+ err = ovl_copy_up(dentry);
+ if (err)
+ goto out_drop_write;
+
+ ovl_path_upper(dentry, &realpath);
+ }
+
+ err = vfs_open(&realpath, file, cred);
+out_drop_write:
+ if (want_write)
+ ovl_drop_write(dentry);
+out:
+ return err;
+}
+
+static const struct inode_operations ovl_file_inode_operations = {
+ .setattr = ovl_setattr,
+ .permission = ovl_permission,
+ .getattr = ovl_getattr,
+ .setxattr = ovl_setxattr,
+ .getxattr = ovl_getxattr,
+ .listxattr = ovl_listxattr,
+ .removexattr = ovl_removexattr,
+ .dentry_open = ovl_dentry_open,
+};
+
+static const struct inode_operations ovl_symlink_inode_operations = {
+ .setattr = ovl_setattr,
+ .follow_link = ovl_follow_link,
+ .put_link = ovl_put_link,
+ .readlink = ovl_readlink,
+ .getattr = ovl_getattr,
+ .setxattr = ovl_setxattr,
+ .getxattr = ovl_getxattr,
+ .listxattr = ovl_listxattr,
+ .removexattr = ovl_removexattr,
+};
+
+struct inode *ovl_new_inode(struct super_block *sb, umode_t mode,
+ struct ovl_entry *oe)
+{
+ struct inode *inode;
+
+ inode = new_inode(sb);
+ if (!inode)
+ return NULL;
+
+ mode &= S_IFMT;
+
+ inode->i_ino = get_next_ino();
+ inode->i_mode = mode;
+ inode->i_flags |= S_NOATIME | S_NOCMTIME;
+
+ switch (mode) {
+ case S_IFDIR:
+ inode->i_private = oe;
+ inode->i_op = &ovl_dir_inode_operations;
+ inode->i_fop = &ovl_dir_operations;
+ break;
+
+ case S_IFLNK:
+ inode->i_op = &ovl_symlink_inode_operations;
+ break;
+
+ case S_IFREG:
+ case S_IFSOCK:
+ case S_IFBLK:
+ case S_IFCHR:
+ case S_IFIFO:
+ inode->i_op = &ovl_file_inode_operations;
+ break;
+
+ default:
+ WARN(1, "illegal file type: %i\n", mode);
+ iput(inode);
+ inode = NULL;
+ }
+
+ return inode;
+
+}
--- /dev/null
+/*
+ *
+ * Copyright (C) 2011 Novell Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+
+struct ovl_entry;
+
+enum ovl_path_type {
+ OVL_PATH_PURE_UPPER,
+ OVL_PATH_UPPER,
+ OVL_PATH_MERGE,
+ OVL_PATH_LOWER,
+};
+
+extern const char *ovl_opaque_xattr;
+
+static inline int ovl_do_rmdir(struct inode *dir, struct dentry *dentry)
+{
+ int err = vfs_rmdir(dir, dentry);
+ pr_debug("rmdir(%pd2) = %i\n", dentry, err);
+ return err;
+}
+
+static inline int ovl_do_unlink(struct inode *dir, struct dentry *dentry)
+{
+ int err = vfs_unlink(dir, dentry, NULL);
+ pr_debug("unlink(%pd2) = %i\n", dentry, err);
+ return err;
+}
+
+static inline int ovl_do_link(struct dentry *old_dentry, struct inode *dir,
+ struct dentry *new_dentry, bool debug)
+{
+ int err = vfs_link(old_dentry, dir, new_dentry, NULL);
+ if (debug) {
+ pr_debug("link(%pd2, %pd2) = %i\n",
+ old_dentry, new_dentry, err);
+ }
+ return err;
+}
+
+static inline int ovl_do_create(struct inode *dir, struct dentry *dentry,
+ umode_t mode, bool debug)
+{
+ int err = vfs_create(dir, dentry, mode, true);
+ if (debug)
+ pr_debug("create(%pd2, 0%o) = %i\n", dentry, mode, err);
+ return err;
+}
+
+static inline int ovl_do_mkdir(struct inode *dir, struct dentry *dentry,
+ umode_t mode, bool debug)
+{
+ int err = vfs_mkdir(dir, dentry, mode);
+ if (debug)
+ pr_debug("mkdir(%pd2, 0%o) = %i\n", dentry, mode, err);
+ return err;
+}
+
+static inline int ovl_do_mknod(struct inode *dir, struct dentry *dentry,
+ umode_t mode, dev_t dev, bool debug)
+{
+ int err = vfs_mknod(dir, dentry, mode, dev);
+ if (debug) {
+ pr_debug("mknod(%pd2, 0%o, 0%o) = %i\n",
+ dentry, mode, dev, err);
+ }
+ return err;
+}
+
+static inline int ovl_do_symlink(struct inode *dir, struct dentry *dentry,
+ const char *oldname, bool debug)
+{
+ int err = vfs_symlink(dir, dentry, oldname);
+ if (debug)
+ pr_debug("symlink(\"%s\", %pd2) = %i\n", oldname, dentry, err);
+ return err;
+}
+
+static inline int ovl_do_setxattr(struct dentry *dentry, const char *name,
+ const void *value, size_t size, int flags)
+{
+ int err = vfs_setxattr(dentry, name, value, size, flags);
+ pr_debug("setxattr(%pd2, \"%s\", \"%*s\", 0x%x) = %i\n",
+ dentry, name, (int) size, (char *) value, flags, err);
+ return err;
+}
+
+static inline int ovl_do_removexattr(struct dentry *dentry, const char *name)
+{
+ int err = vfs_removexattr(dentry, name);
+ pr_debug("removexattr(%pd2, \"%s\") = %i\n", dentry, name, err);
+ return err;
+}
+
+static inline int ovl_do_rename(struct inode *olddir, struct dentry *olddentry,
+ struct inode *newdir, struct dentry *newdentry,
+ unsigned int flags)
+{
+ int err;
+
+ pr_debug("rename2(%pd2, %pd2, 0x%x)\n",
+ olddentry, newdentry, flags);
+
+ err = vfs_rename(olddir, olddentry, newdir, newdentry, NULL, flags);
+
+ if (err) {
+ pr_debug("...rename2(%pd2, %pd2, ...) = %i\n",
+ olddentry, newdentry, err);
+ }
+ return err;
+}
+
+static inline int ovl_do_whiteout(struct inode *dir, struct dentry *dentry)
+{
+ int err = vfs_whiteout(dir, dentry);
+ pr_debug("whiteout(%pd2) = %i\n", dentry, err);
+ return err;
+}
+
+enum ovl_path_type ovl_path_type(struct dentry *dentry);
+u64 ovl_dentry_version_get(struct dentry *dentry);
+void ovl_dentry_version_inc(struct dentry *dentry);
+void ovl_path_upper(struct dentry *dentry, struct path *path);
+void ovl_path_lower(struct dentry *dentry, struct path *path);
+enum ovl_path_type ovl_path_real(struct dentry *dentry, struct path *path);
+struct dentry *ovl_dentry_upper(struct dentry *dentry);
+struct dentry *ovl_dentry_lower(struct dentry *dentry);
+struct dentry *ovl_dentry_real(struct dentry *dentry);
+struct dentry *ovl_entry_real(struct ovl_entry *oe, bool *is_upper);
+struct ovl_dir_cache *ovl_dir_cache(struct dentry *dentry);
+void ovl_set_dir_cache(struct dentry *dentry, struct ovl_dir_cache *cache);
+struct dentry *ovl_workdir(struct dentry *dentry);
+int ovl_want_write(struct dentry *dentry);
+void ovl_drop_write(struct dentry *dentry);
+bool ovl_dentry_is_opaque(struct dentry *dentry);
+void ovl_dentry_set_opaque(struct dentry *dentry, bool opaque);
+bool ovl_is_whiteout(struct dentry *dentry);
+void ovl_dentry_update(struct dentry *dentry, struct dentry *upperdentry);
+struct dentry *ovl_lookup(struct inode *dir, struct dentry *dentry,
+ unsigned int flags);
+struct file *ovl_path_open(struct path *path, int flags);
+
+struct dentry *ovl_upper_create(struct dentry *upperdir, struct dentry *dentry,
+ struct kstat *stat, const char *link);
+
+/* readdir.c */
+extern const struct file_operations ovl_dir_operations;
+int ovl_check_empty_dir(struct dentry *dentry, struct list_head *list);
+void ovl_cleanup_whiteouts(struct dentry *upper, struct list_head *list);
+void ovl_cache_free(struct list_head *list);
+
+/* inode.c */
+int ovl_setattr(struct dentry *dentry, struct iattr *attr);
+int ovl_permission(struct inode *inode, int mask);
+int ovl_setxattr(struct dentry *dentry, const char *name,
+ const void *value, size_t size, int flags);
+ssize_t ovl_getxattr(struct dentry *dentry, const char *name,
+ void *value, size_t size);
+ssize_t ovl_listxattr(struct dentry *dentry, char *list, size_t size);
+int ovl_removexattr(struct dentry *dentry, const char *name);
+
+struct inode *ovl_new_inode(struct super_block *sb, umode_t mode,
+ struct ovl_entry *oe);
+static inline void ovl_copyattr(struct inode *from, struct inode *to)
+{
+ to->i_uid = from->i_uid;
+ to->i_gid = from->i_gid;
+}
+
+/* dir.c */
+extern const struct inode_operations ovl_dir_inode_operations;
+struct dentry *ovl_lookup_temp(struct dentry *workdir, struct dentry *dentry);
+int ovl_create_real(struct inode *dir, struct dentry *newdentry,
+ struct kstat *stat, const char *link,
+ struct dentry *hardlink, bool debug);
+void ovl_cleanup(struct inode *dir, struct dentry *dentry);
+
+/* copy_up.c */
+int ovl_copy_up(struct dentry *dentry);
+int ovl_copy_up_one(struct dentry *parent, struct dentry *dentry,
+ struct path *lowerpath, struct kstat *stat,
+ struct iattr *attr);
+int ovl_copy_xattr(struct dentry *old, struct dentry *new);
+int ovl_set_attr(struct dentry *upper, struct kstat *stat);
--- /dev/null
+/*
+ *
+ * Copyright (C) 2011 Novell Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/fs.h>
+#include <linux/slab.h>
+#include <linux/namei.h>
+#include <linux/file.h>
+#include <linux/xattr.h>
+#include <linux/rbtree.h>
+#include <linux/security.h>
+#include <linux/cred.h>
+#include "overlayfs.h"
+
+struct ovl_cache_entry {
+ unsigned int len;
+ unsigned int type;
+ u64 ino;
+ struct list_head l_node;
+ struct rb_node node;
+ bool is_whiteout;
+ bool is_cursor;
+ char name[];
+};
+
+struct ovl_dir_cache {
+ long refcount;
+ u64 version;
+ struct list_head entries;
+};
+
+struct ovl_readdir_data {
+ struct dir_context ctx;
+ bool is_merge;
+ struct rb_root root;
+ struct list_head *list;
+ struct list_head middle;
+ int count;
+ int err;
+};
+
+struct ovl_dir_file {
+ bool is_real;
+ bool is_upper;
+ struct ovl_dir_cache *cache;
+ struct ovl_cache_entry cursor;
+ struct file *realfile;
+ struct file *upperfile;
+};
+
+static struct ovl_cache_entry *ovl_cache_entry_from_node(struct rb_node *n)
+{
+ return container_of(n, struct ovl_cache_entry, node);
+}
+
+static struct ovl_cache_entry *ovl_cache_entry_find(struct rb_root *root,
+ const char *name, int len)
+{
+ struct rb_node *node = root->rb_node;
+ int cmp;
+
+ while (node) {
+ struct ovl_cache_entry *p = ovl_cache_entry_from_node(node);
+
+ cmp = strncmp(name, p->name, len);
+ if (cmp > 0)
+ node = p->node.rb_right;
+ else if (cmp < 0 || len < p->len)
+ node = p->node.rb_left;
+ else
+ return p;
+ }
+
+ return NULL;
+}
+
+static struct ovl_cache_entry *ovl_cache_entry_new(const char *name, int len,
+ u64 ino, unsigned int d_type)
+{
+ struct ovl_cache_entry *p;
+ size_t size = offsetof(struct ovl_cache_entry, name[len + 1]);
+
+ p = kmalloc(size, GFP_KERNEL);
+ if (p) {
+ memcpy(p->name, name, len);
+ p->name[len] = '\0';
+ p->len = len;
+ p->type = d_type;
+ p->ino = ino;
+ p->is_whiteout = false;
+ p->is_cursor = false;
+ }
+
+ return p;
+}
+
+static int ovl_cache_entry_add_rb(struct ovl_readdir_data *rdd,
+ const char *name, int len, u64 ino,
+ unsigned int d_type)
+{
+ struct rb_node **newp = &rdd->root.rb_node;
+ struct rb_node *parent = NULL;
+ struct ovl_cache_entry *p;
+
+ while (*newp) {
+ int cmp;
+ struct ovl_cache_entry *tmp;
+
+ parent = *newp;
+ tmp = ovl_cache_entry_from_node(*newp);
+ cmp = strncmp(name, tmp->name, len);
+ if (cmp > 0)
+ newp = &tmp->node.rb_right;
+ else if (cmp < 0 || len < tmp->len)
+ newp = &tmp->node.rb_left;
+ else
+ return 0;
+ }
+
+ p = ovl_cache_entry_new(name, len, ino, d_type);
+ if (p == NULL)
+ return -ENOMEM;
+
+ list_add_tail(&p->l_node, rdd->list);
+ rb_link_node(&p->node, parent, newp);
+ rb_insert_color(&p->node, &rdd->root);
+
+ return 0;
+}
+
+static int ovl_fill_lower(struct ovl_readdir_data *rdd,
+ const char *name, int namelen,
+ loff_t offset, u64 ino, unsigned int d_type)
+{
+ struct ovl_cache_entry *p;
+
+ p = ovl_cache_entry_find(&rdd->root, name, namelen);
+ if (p) {
+ list_move_tail(&p->l_node, &rdd->middle);
+ } else {
+ p = ovl_cache_entry_new(name, namelen, ino, d_type);
+ if (p == NULL)
+ rdd->err = -ENOMEM;
+ else
+ list_add_tail(&p->l_node, &rdd->middle);
+ }
+
+ return rdd->err;
+}
+
+void ovl_cache_free(struct list_head *list)
+{
+ struct ovl_cache_entry *p;
+ struct ovl_cache_entry *n;
+
+ list_for_each_entry_safe(p, n, list, l_node)
+ kfree(p);
+
+ INIT_LIST_HEAD(list);
+}
+
+static void ovl_cache_put(struct ovl_dir_file *od, struct dentry *dentry)
+{
+ struct ovl_dir_cache *cache = od->cache;
+
+ list_del_init(&od->cursor.l_node);
+ WARN_ON(cache->refcount <= 0);
+ cache->refcount--;
+ if (!cache->refcount) {
+ if (ovl_dir_cache(dentry) == cache)
+ ovl_set_dir_cache(dentry, NULL);
+
+ ovl_cache_free(&cache->entries);
+ kfree(cache);
+ }
+}
+
+static int ovl_fill_merge(void *buf, const char *name, int namelen,
+ loff_t offset, u64 ino, unsigned int d_type)
+{
+ struct ovl_readdir_data *rdd = buf;
+
+ rdd->count++;
+ if (!rdd->is_merge)
+ return ovl_cache_entry_add_rb(rdd, name, namelen, ino, d_type);
+ else
+ return ovl_fill_lower(rdd, name, namelen, offset, ino, d_type);
+}
+
+static inline int ovl_dir_read(struct path *realpath,
+ struct ovl_readdir_data *rdd)
+{
+ struct file *realfile;
+ int err;
+
+ realfile = ovl_path_open(realpath, O_RDONLY | O_DIRECTORY);
+ if (IS_ERR(realfile))
+ return PTR_ERR(realfile);
+
+ rdd->ctx.pos = 0;
+ do {
+ rdd->count = 0;
+ rdd->err = 0;
+ err = iterate_dir(realfile, &rdd->ctx);
+ if (err >= 0)
+ err = rdd->err;
+ } while (!err && rdd->count);
+ fput(realfile);
+
+ return err;
+}
+
+static void ovl_dir_reset(struct file *file)
+{
+ struct ovl_dir_file *od = file->private_data;
+ struct ovl_dir_cache *cache = od->cache;
+ struct dentry *dentry = file->f_path.dentry;
+ enum ovl_path_type type = ovl_path_type(dentry);
+
+ if (cache && ovl_dentry_version_get(dentry) != cache->version) {
+ ovl_cache_put(od, dentry);
+ od->cache = NULL;
+ }
+ WARN_ON(!od->is_real && type != OVL_PATH_MERGE);
+ if (od->is_real && type == OVL_PATH_MERGE)
+ od->is_real = false;
+}
+
+static int ovl_dir_mark_whiteouts(struct dentry *dir,
+ struct ovl_readdir_data *rdd)
+{
+ struct ovl_cache_entry *p;
+ struct dentry *dentry;
+ const struct cred *old_cred;
+ struct cred *override_cred;
+
+ override_cred = prepare_creds();
+ if (!override_cred) {
+ ovl_cache_free(rdd->list);
+ return -ENOMEM;
+ }
+
+ /*
+ * CAP_DAC_OVERRIDE for lookup
+ */
+ cap_raise(override_cred->cap_effective, CAP_DAC_OVERRIDE);
+ old_cred = override_creds(override_cred);
+
+ mutex_lock(&dir->d_inode->i_mutex);
+ list_for_each_entry(p, rdd->list, l_node) {
+ if (p->is_cursor)
+ continue;
+
+ if (p->type != DT_CHR)
+ continue;
+
+ dentry = lookup_one_len(p->name, dir, p->len);
+ if (IS_ERR(dentry))
+ continue;
+
+ p->is_whiteout = ovl_is_whiteout(dentry);
+ dput(dentry);
+ }
+ mutex_unlock(&dir->d_inode->i_mutex);
+
+ revert_creds(old_cred);
+ put_cred(override_cred);
+
+ return 0;
+}
+
+static int ovl_dir_read_merged(struct dentry *dentry, struct list_head *list)
+{
+ int err;
+ struct path lowerpath;
+ struct path upperpath;
+ struct ovl_readdir_data rdd = {
+ .ctx.actor = ovl_fill_merge,
+ .list = list,
+ .root = RB_ROOT,
+ .is_merge = false,
+ };
+
+ ovl_path_lower(dentry, &lowerpath);
+ ovl_path_upper(dentry, &upperpath);
+
+ if (upperpath.dentry) {
+ err = ovl_dir_read(&upperpath, &rdd);
+ if (err)
+ goto out;
+
+ if (lowerpath.dentry) {
+ err = ovl_dir_mark_whiteouts(upperpath.dentry, &rdd);
+ if (err)
+ goto out;
+ }
+ }
+ if (lowerpath.dentry) {
+ /*
+ * Insert lowerpath entries before upperpath ones, this allows
+ * offsets to be reasonably constant
+ */
+ list_add(&rdd.middle, rdd.list);
+ rdd.is_merge = true;
+ err = ovl_dir_read(&lowerpath, &rdd);
+ list_del(&rdd.middle);
+ }
+out:
+ return err;
+}
+
+static void ovl_seek_cursor(struct ovl_dir_file *od, loff_t pos)
+{
+ struct ovl_cache_entry *p;
+ loff_t off = 0;
+
+ list_for_each_entry(p, &od->cache->entries, l_node) {
+ if (p->is_cursor)
+ continue;
+ if (off >= pos)
+ break;
+ off++;
+ }
+ list_move_tail(&od->cursor.l_node, &p->l_node);
+}
+
+static struct ovl_dir_cache *ovl_cache_get(struct dentry *dentry)
+{
+ int res;
+ struct ovl_dir_cache *cache;
+
+ cache = ovl_dir_cache(dentry);
+ if (cache && ovl_dentry_version_get(dentry) == cache->version) {
+ cache->refcount++;
+ return cache;
+ }
+ ovl_set_dir_cache(dentry, NULL);
+
+ cache = kzalloc(sizeof(struct ovl_dir_cache), GFP_KERNEL);
+ if (!cache)
+ return ERR_PTR(-ENOMEM);
+
+ cache->refcount = 1;
+ INIT_LIST_HEAD(&cache->entries);
+
+ res = ovl_dir_read_merged(dentry, &cache->entries);
+ if (res) {
+ ovl_cache_free(&cache->entries);
+ kfree(cache);
+ return ERR_PTR(res);
+ }
+
+ cache->version = ovl_dentry_version_get(dentry);
+ ovl_set_dir_cache(dentry, cache);
+
+ return cache;
+}
+
+static int ovl_iterate(struct file *file, struct dir_context *ctx)
+{
+ struct ovl_dir_file *od = file->private_data;
+ struct dentry *dentry = file->f_path.dentry;
+
+ if (!ctx->pos)
+ ovl_dir_reset(file);
+
+ if (od->is_real)
+ return iterate_dir(od->realfile, ctx);
+
+ if (!od->cache) {
+ struct ovl_dir_cache *cache;
+
+ cache = ovl_cache_get(dentry);
+ if (IS_ERR(cache))
+ return PTR_ERR(cache);
+
+ od->cache = cache;
+ ovl_seek_cursor(od, ctx->pos);
+ }
+
+ while (od->cursor.l_node.next != &od->cache->entries) {
+ struct ovl_cache_entry *p;
+
+ p = list_entry(od->cursor.l_node.next, struct ovl_cache_entry, l_node);
+ /* Skip cursors */
+ if (!p->is_cursor) {
+ if (!p->is_whiteout) {
+ if (!dir_emit(ctx, p->name, p->len, p->ino, p->type))
+ break;
+ }
+ ctx->pos++;
+ }
+ list_move(&od->cursor.l_node, &p->l_node);
+ }
+ return 0;
+}
+
+static loff_t ovl_dir_llseek(struct file *file, loff_t offset, int origin)
+{
+ loff_t res;
+ struct ovl_dir_file *od = file->private_data;
+
+ mutex_lock(&file_inode(file)->i_mutex);
+ if (!file->f_pos)
+ ovl_dir_reset(file);
+
+ if (od->is_real) {
+ res = vfs_llseek(od->realfile, offset, origin);
+ file->f_pos = od->realfile->f_pos;
+ } else {
+ res = -EINVAL;
+
+ switch (origin) {
+ case SEEK_CUR:
+ offset += file->f_pos;
+ break;
+ case SEEK_SET:
+ break;
+ default:
+ goto out_unlock;
+ }
+ if (offset < 0)
+ goto out_unlock;
+
+ if (offset != file->f_pos) {
+ file->f_pos = offset;
+ if (od->cache)
+ ovl_seek_cursor(od, offset);
+ }
+ res = offset;
+ }
+out_unlock:
+ mutex_unlock(&file_inode(file)->i_mutex);
+
+ return res;
+}
+
+static int ovl_dir_fsync(struct file *file, loff_t start, loff_t end,
+ int datasync)
+{
+ struct ovl_dir_file *od = file->private_data;
+ struct dentry *dentry = file->f_path.dentry;
+ struct file *realfile = od->realfile;
+
+ /*
+ * Need to check if we started out being a lower dir, but got copied up
+ */
+ if (!od->is_upper && ovl_path_type(dentry) != OVL_PATH_LOWER) {
+ struct inode *inode = file_inode(file);
+
+ realfile = lockless_dereference(od->upperfile);
+ if (!realfile) {
+ struct path upperpath;
+
+ ovl_path_upper(dentry, &upperpath);
+ realfile = ovl_path_open(&upperpath, O_RDONLY);
+ smp_mb__before_spinlock();
+ mutex_lock(&inode->i_mutex);
+ if (!od->upperfile) {
+ if (IS_ERR(realfile)) {
+ mutex_unlock(&inode->i_mutex);
+ return PTR_ERR(realfile);
+ }
+ od->upperfile = realfile;
+ } else {
+ /* somebody has beaten us to it */
+ if (!IS_ERR(realfile))
+ fput(realfile);
+ realfile = od->upperfile;
+ }
+ mutex_unlock(&inode->i_mutex);
+ }
+ }
+
+ return vfs_fsync_range(realfile, start, end, datasync);
+}
+
+static int ovl_dir_release(struct inode *inode, struct file *file)
+{
+ struct ovl_dir_file *od = file->private_data;
+
+ if (od->cache) {
+ mutex_lock(&inode->i_mutex);
+ ovl_cache_put(od, file->f_path.dentry);
+ mutex_unlock(&inode->i_mutex);
+ }
+ fput(od->realfile);
+ if (od->upperfile)
+ fput(od->upperfile);
+ kfree(od);
+
+ return 0;
+}
+
+static int ovl_dir_open(struct inode *inode, struct file *file)
+{
+ struct path realpath;
+ struct file *realfile;
+ struct ovl_dir_file *od;
+ enum ovl_path_type type;
+
+ od = kzalloc(sizeof(struct ovl_dir_file), GFP_KERNEL);
+ if (!od)
+ return -ENOMEM;
+
+ type = ovl_path_real(file->f_path.dentry, &realpath);
+ realfile = ovl_path_open(&realpath, file->f_flags);
+ if (IS_ERR(realfile)) {
+ kfree(od);
+ return PTR_ERR(realfile);
+ }
+ INIT_LIST_HEAD(&od->cursor.l_node);
+ od->realfile = realfile;
+ od->is_real = (type != OVL_PATH_MERGE);
+ od->is_upper = (type != OVL_PATH_LOWER);
+ od->cursor.is_cursor = true;
+ file->private_data = od;
+
+ return 0;
+}
+
+const struct file_operations ovl_dir_operations = {
+ .read = generic_read_dir,
+ .open = ovl_dir_open,
+ .iterate = ovl_iterate,
+ .llseek = ovl_dir_llseek,
+ .fsync = ovl_dir_fsync,
+ .release = ovl_dir_release,
+};
+
+int ovl_check_empty_dir(struct dentry *dentry, struct list_head *list)
+{
+ int err;
+ struct ovl_cache_entry *p;
+
+ err = ovl_dir_read_merged(dentry, list);
+ if (err)
+ return err;
+
+ err = 0;
+
+ list_for_each_entry(p, list, l_node) {
+ if (p->is_whiteout)
+ continue;
+
+ if (p->name[0] == '.') {
+ if (p->len == 1)
+ continue;
+ if (p->len == 2 && p->name[1] == '.')
+ continue;
+ }
+ err = -ENOTEMPTY;
+ break;
+ }
+
+ return err;
+}
+
+void ovl_cleanup_whiteouts(struct dentry *upper, struct list_head *list)
+{
+ struct ovl_cache_entry *p;
+
+ mutex_lock_nested(&upper->d_inode->i_mutex, I_MUTEX_CHILD);
+ list_for_each_entry(p, list, l_node) {
+ struct dentry *dentry;
+
+ if (!p->is_whiteout)
+ continue;
+
+ dentry = lookup_one_len(p->name, upper, p->len);
+ if (IS_ERR(dentry)) {
+ pr_err("overlayfs: lookup '%s/%.*s' failed (%i)\n",
+ upper->d_name.name, p->len, p->name,
+ (int) PTR_ERR(dentry));
+ continue;
+ }
+ ovl_cleanup(upper->d_inode, dentry);
+ dput(dentry);
+ }
+ mutex_unlock(&upper->d_inode->i_mutex);
+}
--- /dev/null
+/*
+ *
+ * Copyright (C) 2011 Novell Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ */
+
+#include <linux/fs.h>
+#include <linux/namei.h>
+#include <linux/xattr.h>
+#include <linux/security.h>
+#include <linux/mount.h>
+#include <linux/slab.h>
+#include <linux/parser.h>
+#include <linux/module.h>
+#include <linux/sched.h>
+#include <linux/statfs.h>
+#include <linux/seq_file.h>
+#include "overlayfs.h"
+
+MODULE_AUTHOR("Miklos Szeredi <miklos@szeredi.hu>");
+MODULE_DESCRIPTION("Overlay filesystem");
+MODULE_LICENSE("GPL");
+
+#define OVERLAYFS_SUPER_MAGIC 0x794c7630
+
+struct ovl_config {
+ char *lowerdir;
+ char *upperdir;
+ char *workdir;
+};
+
+/* private information held for overlayfs's superblock */
+struct ovl_fs {
+ struct vfsmount *upper_mnt;
+ struct vfsmount *lower_mnt;
+ struct dentry *workdir;
+ long lower_namelen;
+ /* pathnames of lower and upper dirs, for show_options */
+ struct ovl_config config;
+};
+
+struct ovl_dir_cache;
+
+/* private information held for every overlayfs dentry */
+struct ovl_entry {
+ struct dentry *__upperdentry;
+ struct dentry *lowerdentry;
+ struct ovl_dir_cache *cache;
+ union {
+ struct {
+ u64 version;
+ bool opaque;
+ };
+ struct rcu_head rcu;
+ };
+};
+
+const char *ovl_opaque_xattr = "trusted.overlay.opaque";
+
+
+enum ovl_path_type ovl_path_type(struct dentry *dentry)
+{
+ struct ovl_entry *oe = dentry->d_fsdata;
+
+ if (oe->__upperdentry) {
+ if (oe->lowerdentry) {
+ if (S_ISDIR(dentry->d_inode->i_mode))
+ return OVL_PATH_MERGE;
+ else
+ return OVL_PATH_UPPER;
+ } else {
+ if (oe->opaque)
+ return OVL_PATH_UPPER;
+ else
+ return OVL_PATH_PURE_UPPER;
+ }
+ } else {
+ return OVL_PATH_LOWER;
+ }
+}
+
+static struct dentry *ovl_upperdentry_dereference(struct ovl_entry *oe)
+{
+ return lockless_dereference(oe->__upperdentry);
+}
+
+void ovl_path_upper(struct dentry *dentry, struct path *path)
+{
+ struct ovl_fs *ofs = dentry->d_sb->s_fs_info;
+ struct ovl_entry *oe = dentry->d_fsdata;
+
+ path->mnt = ofs->upper_mnt;
+ path->dentry = ovl_upperdentry_dereference(oe);
+}
+
+enum ovl_path_type ovl_path_real(struct dentry *dentry, struct path *path)
+{
+
+ enum ovl_path_type type = ovl_path_type(dentry);
+
+ if (type == OVL_PATH_LOWER)
+ ovl_path_lower(dentry, path);
+ else
+ ovl_path_upper(dentry, path);
+
+ return type;
+}
+
+struct dentry *ovl_dentry_upper(struct dentry *dentry)
+{
+ struct ovl_entry *oe = dentry->d_fsdata;
+
+ return ovl_upperdentry_dereference(oe);
+}
+
+struct dentry *ovl_dentry_lower(struct dentry *dentry)
+{
+ struct ovl_entry *oe = dentry->d_fsdata;
+
+ return oe->lowerdentry;
+}
+
+struct dentry *ovl_dentry_real(struct dentry *dentry)
+{
+ struct ovl_entry *oe = dentry->d_fsdata;
+ struct dentry *realdentry;
+
+ realdentry = ovl_upperdentry_dereference(oe);
+ if (!realdentry)
+ realdentry = oe->lowerdentry;
+
+ return realdentry;
+}
+
+struct dentry *ovl_entry_real(struct ovl_entry *oe, bool *is_upper)
+{
+ struct dentry *realdentry;
+
+ realdentry = ovl_upperdentry_dereference(oe);
+ if (realdentry) {
+ *is_upper = true;
+ } else {
+ realdentry = oe->lowerdentry;
+ *is_upper = false;
+ }
+ return realdentry;
+}
+
+struct ovl_dir_cache *ovl_dir_cache(struct dentry *dentry)
+{
+ struct ovl_entry *oe = dentry->d_fsdata;
+
+ return oe->cache;
+}
+
+void ovl_set_dir_cache(struct dentry *dentry, struct ovl_dir_cache *cache)
+{
+ struct ovl_entry *oe = dentry->d_fsdata;
+
+ oe->cache = cache;
+}
+
+void ovl_path_lower(struct dentry *dentry, struct path *path)
+{
+ struct ovl_fs *ofs = dentry->d_sb->s_fs_info;
+ struct ovl_entry *oe = dentry->d_fsdata;
+
+ path->mnt = ofs->lower_mnt;
+ path->dentry = oe->lowerdentry;
+}
+
+int ovl_want_write(struct dentry *dentry)
+{
+ struct ovl_fs *ofs = dentry->d_sb->s_fs_info;
+ return mnt_want_write(ofs->upper_mnt);
+}
+
+void ovl_drop_write(struct dentry *dentry)
+{
+ struct ovl_fs *ofs = dentry->d_sb->s_fs_info;
+ mnt_drop_write(ofs->upper_mnt);
+}
+
+struct dentry *ovl_workdir(struct dentry *dentry)
+{
+ struct ovl_fs *ofs = dentry->d_sb->s_fs_info;
+ return ofs->workdir;
+}
+
+bool ovl_dentry_is_opaque(struct dentry *dentry)
+{
+ struct ovl_entry *oe = dentry->d_fsdata;
+ return oe->opaque;
+}
+
+void ovl_dentry_set_opaque(struct dentry *dentry, bool opaque)
+{
+ struct ovl_entry *oe = dentry->d_fsdata;
+ oe->opaque = opaque;
+}
+
+void ovl_dentry_update(struct dentry *dentry, struct dentry *upperdentry)
+{
+ struct ovl_entry *oe = dentry->d_fsdata;
+
+ WARN_ON(!mutex_is_locked(&upperdentry->d_parent->d_inode->i_mutex));
+ WARN_ON(oe->__upperdentry);
+ BUG_ON(!upperdentry->d_inode);
+ /*
+ * Make sure upperdentry is consistent before making it visible to
+ * ovl_upperdentry_dereference().
+ */
+ smp_wmb();
+ oe->__upperdentry = upperdentry;
+}
+
+void ovl_dentry_version_inc(struct dentry *dentry)
+{
+ struct ovl_entry *oe = dentry->d_fsdata;
+
+ WARN_ON(!mutex_is_locked(&dentry->d_inode->i_mutex));
+ oe->version++;
+}
+
+u64 ovl_dentry_version_get(struct dentry *dentry)
+{
+ struct ovl_entry *oe = dentry->d_fsdata;
+
+ WARN_ON(!mutex_is_locked(&dentry->d_inode->i_mutex));
+ return oe->version;
+}
+
+bool ovl_is_whiteout(struct dentry *dentry)
+{
+ struct inode *inode = dentry->d_inode;
+
+ return inode && IS_WHITEOUT(inode);
+}
+
+static bool ovl_is_opaquedir(struct dentry *dentry)
+{
+ int res;
+ char val;
+ struct inode *inode = dentry->d_inode;
+
+ if (!S_ISDIR(inode->i_mode) || !inode->i_op->getxattr)
+ return false;
+
+ res = inode->i_op->getxattr(dentry, ovl_opaque_xattr, &val, 1);
+ if (res == 1 && val == 'y')
+ return true;
+
+ return false;
+}
+
+static void ovl_dentry_release(struct dentry *dentry)
+{
+ struct ovl_entry *oe = dentry->d_fsdata;
+
+ if (oe) {
+ dput(oe->__upperdentry);
+ dput(oe->lowerdentry);
+ kfree_rcu(oe, rcu);
+ }
+}
+
+static const struct dentry_operations ovl_dentry_operations = {
+ .d_release = ovl_dentry_release,
+};
+
+static struct ovl_entry *ovl_alloc_entry(void)
+{
+ return kzalloc(sizeof(struct ovl_entry), GFP_KERNEL);
+}
+
+static inline struct dentry *ovl_lookup_real(struct dentry *dir,
+ struct qstr *name)
+{
+ struct dentry *dentry;
+
+ mutex_lock(&dir->d_inode->i_mutex);
+ dentry = lookup_one_len(name->name, dir, name->len);
+ mutex_unlock(&dir->d_inode->i_mutex);
+
+ if (IS_ERR(dentry)) {
+ if (PTR_ERR(dentry) == -ENOENT)
+ dentry = NULL;
+ } else if (!dentry->d_inode) {
+ dput(dentry);
+ dentry = NULL;
+ }
+ return dentry;
+}
+
+struct dentry *ovl_lookup(struct inode *dir, struct dentry *dentry,
+ unsigned int flags)
+{
+ struct ovl_entry *oe;
+ struct dentry *upperdir;
+ struct dentry *lowerdir;
+ struct dentry *upperdentry = NULL;
+ struct dentry *lowerdentry = NULL;
+ struct inode *inode = NULL;
+ int err;
+
+ err = -ENOMEM;
+ oe = ovl_alloc_entry();
+ if (!oe)
+ goto out;
+
+ upperdir = ovl_dentry_upper(dentry->d_parent);
+ lowerdir = ovl_dentry_lower(dentry->d_parent);
+
+ if (upperdir) {
+ upperdentry = ovl_lookup_real(upperdir, &dentry->d_name);
+ err = PTR_ERR(upperdentry);
+ if (IS_ERR(upperdentry))
+ goto out_put_dir;
+
+ if (lowerdir && upperdentry) {
+ if (ovl_is_whiteout(upperdentry)) {
+ dput(upperdentry);
+ upperdentry = NULL;
+ oe->opaque = true;
+ } else if (ovl_is_opaquedir(upperdentry)) {
+ oe->opaque = true;
+ }
+ }
+ }
+ if (lowerdir && !oe->opaque) {
+ lowerdentry = ovl_lookup_real(lowerdir, &dentry->d_name);
+ err = PTR_ERR(lowerdentry);
+ if (IS_ERR(lowerdentry))
+ goto out_dput_upper;
+ }
+
+ if (lowerdentry && upperdentry &&
+ (!S_ISDIR(upperdentry->d_inode->i_mode) ||
+ !S_ISDIR(lowerdentry->d_inode->i_mode))) {
+ dput(lowerdentry);
+ lowerdentry = NULL;
+ oe->opaque = true;
+ }
+
+ if (lowerdentry || upperdentry) {
+ struct dentry *realdentry;
+
+ realdentry = upperdentry ? upperdentry : lowerdentry;
+ err = -ENOMEM;
+ inode = ovl_new_inode(dentry->d_sb, realdentry->d_inode->i_mode,
+ oe);
+ if (!inode)
+ goto out_dput;
+ ovl_copyattr(realdentry->d_inode, inode);
+ }
+
+ oe->__upperdentry = upperdentry;
+ oe->lowerdentry = lowerdentry;
+
+ dentry->d_fsdata = oe;
+ d_add(dentry, inode);
+
+ return NULL;
+
+out_dput:
+ dput(lowerdentry);
+out_dput_upper:
+ dput(upperdentry);
+out_put_dir:
+ kfree(oe);
+out:
+ return ERR_PTR(err);
+}
+
+struct file *ovl_path_open(struct path *path, int flags)
+{
+ return dentry_open(path, flags, current_cred());
+}
+
+static void ovl_put_super(struct super_block *sb)
+{
+ struct ovl_fs *ufs = sb->s_fs_info;
+
+ dput(ufs->workdir);
+ mntput(ufs->upper_mnt);
+ mntput(ufs->lower_mnt);
+
+ kfree(ufs->config.lowerdir);
+ kfree(ufs->config.upperdir);
+ kfree(ufs->config.workdir);
+ kfree(ufs);
+}
+
+/**
+ * ovl_statfs
+ * @sb: The overlayfs super block
+ * @buf: The struct kstatfs to fill in with stats
+ *
+ * Get the filesystem statistics. As writes always target the upper layer
+ * filesystem pass the statfs to the same filesystem.
+ */
+static int ovl_statfs(struct dentry *dentry, struct kstatfs *buf)
+{
+ struct ovl_fs *ofs = dentry->d_sb->s_fs_info;
+ struct dentry *root_dentry = dentry->d_sb->s_root;
+ struct path path;
+ int err;
+
+ ovl_path_upper(root_dentry, &path);
+
+ err = vfs_statfs(&path, buf);
+ if (!err) {
+ buf->f_namelen = max(buf->f_namelen, ofs->lower_namelen);
+ buf->f_type = OVERLAYFS_SUPER_MAGIC;
+ }
+
+ return err;
+}
+
+/**
+ * ovl_show_options
+ *
+ * Prints the mount options for a given superblock.
+ * Returns zero; does not fail.
+ */
+static int ovl_show_options(struct seq_file *m, struct dentry *dentry)
+{
+ struct super_block *sb = dentry->d_sb;
+ struct ovl_fs *ufs = sb->s_fs_info;
+
+ seq_printf(m, ",lowerdir=%s", ufs->config.lowerdir);
+ seq_printf(m, ",upperdir=%s", ufs->config.upperdir);
+ seq_printf(m, ",workdir=%s", ufs->config.workdir);
+ return 0;
+}
+
+static const struct super_operations ovl_super_operations = {
+ .put_super = ovl_put_super,
+ .statfs = ovl_statfs,
+ .show_options = ovl_show_options,
+};
+
+enum {
+ OPT_LOWERDIR,
+ OPT_UPPERDIR,
+ OPT_WORKDIR,
+ OPT_ERR,
+};
+
+static const match_table_t ovl_tokens = {
+ {OPT_LOWERDIR, "lowerdir=%s"},
+ {OPT_UPPERDIR, "upperdir=%s"},
+ {OPT_WORKDIR, "workdir=%s"},
+ {OPT_ERR, NULL}
+};
+
+static char *ovl_next_opt(char **s)
+{
+ char *sbegin = *s;
+ char *p;
+
+ if (sbegin == NULL)
+ return NULL;
+
+ for (p = sbegin; *p; p++) {
+ if (*p == '\\') {
+ p++;
+ if (!*p)
+ break;
+ } else if (*p == ',') {
+ *p = '\0';
+ *s = p + 1;
+ return sbegin;
+ }
+ }
+ *s = NULL;
+ return sbegin;
+}
+
+static int ovl_parse_opt(char *opt, struct ovl_config *config)
+{
+ char *p;
+
+ while ((p = ovl_next_opt(&opt)) != NULL) {
+ int token;
+ substring_t args[MAX_OPT_ARGS];
+
+ if (!*p)
+ continue;
+
+ token = match_token(p, ovl_tokens, args);
+ switch (token) {
+ case OPT_UPPERDIR:
+ kfree(config->upperdir);
+ config->upperdir = match_strdup(&args[0]);
+ if (!config->upperdir)
+ return -ENOMEM;
+ break;
+
+ case OPT_LOWERDIR:
+ kfree(config->lowerdir);
+ config->lowerdir = match_strdup(&args[0]);
+ if (!config->lowerdir)
+ return -ENOMEM;
+ break;
+
+ case OPT_WORKDIR:
+ kfree(config->workdir);
+ config->workdir = match_strdup(&args[0]);
+ if (!config->workdir)
+ return -ENOMEM;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+ }
+ return 0;
+}
+
+#define OVL_WORKDIR_NAME "work"
+
+static struct dentry *ovl_workdir_create(struct vfsmount *mnt,
+ struct dentry *dentry)
+{
+ struct inode *dir = dentry->d_inode;
+ struct dentry *work;
+ int err;
+ bool retried = false;
+
+ err = mnt_want_write(mnt);
+ if (err)
+ return ERR_PTR(err);
+
+ mutex_lock_nested(&dir->i_mutex, I_MUTEX_PARENT);
+retry:
+ work = lookup_one_len(OVL_WORKDIR_NAME, dentry,
+ strlen(OVL_WORKDIR_NAME));
+
+ if (!IS_ERR(work)) {
+ struct kstat stat = {
+ .mode = S_IFDIR | 0,
+ };
+
+ if (work->d_inode) {
+ err = -EEXIST;
+ if (retried)
+ goto out_dput;
+
+ retried = true;
+ ovl_cleanup(dir, work);
+ dput(work);
+ goto retry;
+ }
+
+ err = ovl_create_real(dir, work, &stat, NULL, NULL, true);
+ if (err)
+ goto out_dput;
+ }
+out_unlock:
+ mutex_unlock(&dir->i_mutex);
+ mnt_drop_write(mnt);
+
+ return work;
+
+out_dput:
+ dput(work);
+ work = ERR_PTR(err);
+ goto out_unlock;
+}
+
+static void ovl_unescape(char *s)
+{
+ char *d = s;
+
+ for (;; s++, d++) {
+ if (*s == '\\')
+ s++;
+ *d = *s;
+ if (!*s)
+ break;
+ }
+}
+
+static int ovl_mount_dir(const char *name, struct path *path)
+{
+ int err;
+ char *tmp = kstrdup(name, GFP_KERNEL);
+
+ if (!tmp)
+ return -ENOMEM;
+
+ ovl_unescape(tmp);
+ err = kern_path(tmp, LOOKUP_FOLLOW, path);
+ if (err) {
+ pr_err("overlayfs: failed to resolve '%s': %i\n", tmp, err);
+ err = -EINVAL;
+ }
+ kfree(tmp);
+ return err;
+}
+
+static bool ovl_is_allowed_fs_type(struct dentry *root)
+{
+ const struct dentry_operations *dop = root->d_op;
+
+ /*
+ * We don't support:
+ * - automount filesystems
+ * - filesystems with revalidate (FIXME for lower layer)
+ * - filesystems with case insensitive names
+ */
+ if (dop &&
+ (dop->d_manage || dop->d_automount ||
+ dop->d_revalidate || dop->d_weak_revalidate ||
+ dop->d_compare || dop->d_hash)) {
+ return false;
+ }
+ return true;
+}
+
+/* Workdir should not be subdir of upperdir and vice versa */
+static bool ovl_workdir_ok(struct dentry *workdir, struct dentry *upperdir)
+{
+ bool ok = false;
+
+ if (workdir != upperdir) {
+ ok = (lock_rename(workdir, upperdir) == NULL);
+ unlock_rename(workdir, upperdir);
+ }
+ return ok;
+}
+
+static int ovl_fill_super(struct super_block *sb, void *data, int silent)
+{
+ struct path lowerpath;
+ struct path upperpath;
+ struct path workpath;
+ struct inode *root_inode;
+ struct dentry *root_dentry;
+ struct ovl_entry *oe;
+ struct ovl_fs *ufs;
+ struct kstatfs statfs;
+ int err;
+
+ err = -ENOMEM;
+ ufs = kzalloc(sizeof(struct ovl_fs), GFP_KERNEL);
+ if (!ufs)
+ goto out;
+
+ err = ovl_parse_opt((char *) data, &ufs->config);
+ if (err)
+ goto out_free_config;
+
+ /* FIXME: workdir is not needed for a R/O mount */
+ err = -EINVAL;
+ if (!ufs->config.upperdir || !ufs->config.lowerdir ||
+ !ufs->config.workdir) {
+ pr_err("overlayfs: missing upperdir or lowerdir or workdir\n");
+ goto out_free_config;
+ }
+
+ err = -ENOMEM;
+ oe = ovl_alloc_entry();
+ if (oe == NULL)
+ goto out_free_config;
+
+ err = ovl_mount_dir(ufs->config.upperdir, &upperpath);
+ if (err)
+ goto out_free_oe;
+
+ err = ovl_mount_dir(ufs->config.lowerdir, &lowerpath);
+ if (err)
+ goto out_put_upperpath;
+
+ err = ovl_mount_dir(ufs->config.workdir, &workpath);
+ if (err)
+ goto out_put_lowerpath;
+
+ err = -EINVAL;
+ if (!S_ISDIR(upperpath.dentry->d_inode->i_mode) ||
+ !S_ISDIR(lowerpath.dentry->d_inode->i_mode) ||
+ !S_ISDIR(workpath.dentry->d_inode->i_mode)) {
+ pr_err("overlayfs: upperdir or lowerdir or workdir not a directory\n");
+ goto out_put_workpath;
+ }
+
+ if (upperpath.mnt != workpath.mnt) {
+ pr_err("overlayfs: workdir and upperdir must reside under the same mount\n");
+ goto out_put_workpath;
+ }
+ if (!ovl_workdir_ok(workpath.dentry, upperpath.dentry)) {
+ pr_err("overlayfs: workdir and upperdir must be separate subtrees\n");
+ goto out_put_workpath;
+ }
+
+ if (!ovl_is_allowed_fs_type(upperpath.dentry)) {
+ pr_err("overlayfs: filesystem of upperdir is not supported\n");
+ goto out_put_workpath;
+ }
+
+ if (!ovl_is_allowed_fs_type(lowerpath.dentry)) {
+ pr_err("overlayfs: filesystem of lowerdir is not supported\n");
+ goto out_put_workpath;
+ }
+
+ err = vfs_statfs(&lowerpath, &statfs);
+ if (err) {
+ pr_err("overlayfs: statfs failed on lowerpath\n");
+ goto out_put_workpath;
+ }
+ ufs->lower_namelen = statfs.f_namelen;
+
+ sb->s_stack_depth = max(upperpath.mnt->mnt_sb->s_stack_depth,
+ lowerpath.mnt->mnt_sb->s_stack_depth) + 1;
+
+ err = -EINVAL;
+ if (sb->s_stack_depth > FILESYSTEM_MAX_STACK_DEPTH) {
+ pr_err("overlayfs: maximum fs stacking depth exceeded\n");
+ goto out_put_workpath;
+ }
+
+ ufs->upper_mnt = clone_private_mount(&upperpath);
+ err = PTR_ERR(ufs->upper_mnt);
+ if (IS_ERR(ufs->upper_mnt)) {
+ pr_err("overlayfs: failed to clone upperpath\n");
+ goto out_put_workpath;
+ }
+
+ ufs->lower_mnt = clone_private_mount(&lowerpath);
+ err = PTR_ERR(ufs->lower_mnt);
+ if (IS_ERR(ufs->lower_mnt)) {
+ pr_err("overlayfs: failed to clone lowerpath\n");
+ goto out_put_upper_mnt;
+ }
+
+ ufs->workdir = ovl_workdir_create(ufs->upper_mnt, workpath.dentry);
+ err = PTR_ERR(ufs->workdir);
+ if (IS_ERR(ufs->workdir)) {
+ pr_err("overlayfs: failed to create directory %s/%s\n",
+ ufs->config.workdir, OVL_WORKDIR_NAME);
+ goto out_put_lower_mnt;
+ }
+
+ /*
+ * Make lower_mnt R/O. That way fchmod/fchown on lower file
+ * will fail instead of modifying lower fs.
+ */
+ ufs->lower_mnt->mnt_flags |= MNT_READONLY;
+
+ /* If the upper fs is r/o, we mark overlayfs r/o too */
+ if (ufs->upper_mnt->mnt_sb->s_flags & MS_RDONLY)
+ sb->s_flags |= MS_RDONLY;
+
+ sb->s_d_op = &ovl_dentry_operations;
+
+ err = -ENOMEM;
+ root_inode = ovl_new_inode(sb, S_IFDIR, oe);
+ if (!root_inode)
+ goto out_put_workdir;
+
+ root_dentry = d_make_root(root_inode);
+ if (!root_dentry)
+ goto out_put_workdir;
+
+ mntput(upperpath.mnt);
+ mntput(lowerpath.mnt);
+ path_put(&workpath);
+
+ oe->__upperdentry = upperpath.dentry;
+ oe->lowerdentry = lowerpath.dentry;
+
+ root_dentry->d_fsdata = oe;
+
+ sb->s_magic = OVERLAYFS_SUPER_MAGIC;
+ sb->s_op = &ovl_super_operations;
+ sb->s_root = root_dentry;
+ sb->s_fs_info = ufs;
+
+ return 0;
+
+out_put_workdir:
+ dput(ufs->workdir);
+out_put_lower_mnt:
+ mntput(ufs->lower_mnt);
+out_put_upper_mnt:
+ mntput(ufs->upper_mnt);
+out_put_workpath:
+ path_put(&workpath);
+out_put_lowerpath:
+ path_put(&lowerpath);
+out_put_upperpath:
+ path_put(&upperpath);
+out_free_oe:
+ kfree(oe);
+out_free_config:
+ kfree(ufs->config.lowerdir);
+ kfree(ufs->config.upperdir);
+ kfree(ufs->config.workdir);
+ kfree(ufs);
+out:
+ return err;
+}
+
+static struct dentry *ovl_mount(struct file_system_type *fs_type, int flags,
+ const char *dev_name, void *raw_data)
+{
+ return mount_nodev(fs_type, flags, raw_data, ovl_fill_super);
+}
+
+static struct file_system_type ovl_fs_type = {
+ .owner = THIS_MODULE,
+ .name = "overlay",
+ .mount = ovl_mount,
+ .kill_sb = kill_anon_super,
+};
+MODULE_ALIAS_FS("overlay");
+
+static int __init ovl_init(void)
+{
+ return register_filesystem(&ovl_fs_type);
+}
+
+static void __exit ovl_exit(void)
+{
+ unregister_filesystem(&ovl_fs_type);
+}
+
+module_init(ovl_init);
+module_exit(ovl_exit);
dqstats_inc(DQST_LOOKUPS);
err = sb->dq_op->write_dquot(dquot);
if (!ret && err)
- err = ret;
+ ret = err;
dqput(dquot);
spin_lock(&dq_list_lock);
}
return ret;
}
+EXPORT_SYMBOL(do_splice_direct);
static int splice_pipe_to_pipe(struct pipe_inode_info *ipipe,
struct pipe_inode_info *opipe,
goto out;
}
-
+/*
+ * Preallocate and zero a range of a file. This mechanism has the allocation
+ * semantics of fallocate and in addition converts data in the range to zeroes.
+ */
int
xfs_zero_file_space(
struct xfs_inode *ip,
xfs_off_t len)
{
struct xfs_mount *mp = ip->i_mount;
- uint granularity;
- xfs_off_t start_boundary;
- xfs_off_t end_boundary;
+ uint blksize;
int error;
trace_xfs_zero_file_space(ip);
- granularity = max_t(uint, 1 << mp->m_sb.sb_blocklog, PAGE_CACHE_SIZE);
+ blksize = 1 << mp->m_sb.sb_blocklog;
/*
- * Round the range of extents we are going to convert inwards. If the
- * offset is aligned, then it doesn't get changed so we zero from the
- * start of the block offset points to.
+ * Punch a hole and prealloc the range. We use hole punch rather than
+ * unwritten extent conversion for two reasons:
+ *
+ * 1.) Hole punch handles partial block zeroing for us.
+ *
+ * 2.) If prealloc returns ENOSPC, the file range is still zero-valued
+ * by virtue of the hole punch.
*/
- start_boundary = round_up(offset, granularity);
- end_boundary = round_down(offset + len, granularity);
-
- ASSERT(start_boundary >= offset);
- ASSERT(end_boundary <= offset + len);
-
- if (start_boundary < end_boundary - 1) {
- /*
- * Writeback the range to ensure any inode size updates due to
- * appending writes make it to disk (otherwise we could just
- * punch out the delalloc blocks).
- */
- error = filemap_write_and_wait_range(VFS_I(ip)->i_mapping,
- start_boundary, end_boundary - 1);
- if (error)
- goto out;
- truncate_pagecache_range(VFS_I(ip), start_boundary,
- end_boundary - 1);
-
- /* convert the blocks */
- error = xfs_alloc_file_space(ip, start_boundary,
- end_boundary - start_boundary - 1,
- XFS_BMAPI_PREALLOC | XFS_BMAPI_CONVERT);
- if (error)
- goto out;
-
- /* We've handled the interior of the range, now for the edges */
- if (start_boundary != offset) {
- error = xfs_iozero(ip, offset, start_boundary - offset);
- if (error)
- goto out;
- }
-
- if (end_boundary != offset + len)
- error = xfs_iozero(ip, end_boundary,
- offset + len - end_boundary);
-
- } else {
- /*
- * It's either a sub-granularity range or the range spanned lies
- * partially across two adjacent blocks.
- */
- error = xfs_iozero(ip, offset, len);
- }
+ error = xfs_free_file_space(ip, offset, len);
+ if (error)
+ goto out;
+ error = xfs_alloc_file_space(ip, round_down(offset, blksize),
+ round_up(offset + len, blksize) -
+ round_down(offset, blksize),
+ XFS_BMAPI_PREALLOC);
out:
return error;
XFS_WANT_CORRUPTED_RETURN(stat == 1);
/* Check if the record contains the inode in request */
- if (irec->ir_startino + XFS_INODES_PER_CHUNK <= agino)
- return -EINVAL;
+ if (irec->ir_startino + XFS_INODES_PER_CHUNK <= agino) {
+ *icount = 0;
+ return 0;
+ }
idx = agino - irec->ir_startino + 1;
if (idx < XFS_INODES_PER_CHUNK &&
#define XFS_BULKSTAT_UBLEFT(ubleft) ((ubleft) >= statstruct_size)
+struct xfs_bulkstat_agichunk {
+ char __user **ac_ubuffer;/* pointer into user's buffer */
+ int ac_ubleft; /* bytes left in user's buffer */
+ int ac_ubelem; /* spaces used in user's buffer */
+};
+
/*
* Process inodes in chunk with a pointer to a formatter function
* that will iget the inode and fill in the appropriate structure.
*/
-int
+static int
xfs_bulkstat_ag_ichunk(
struct xfs_mount *mp,
xfs_agnumber_t agno,
struct xfs_inobt_rec_incore *irbp,
bulkstat_one_pf formatter,
size_t statstruct_size,
- struct xfs_bulkstat_agichunk *acp)
+ struct xfs_bulkstat_agichunk *acp,
+ xfs_agino_t *last_agino)
{
- xfs_ino_t lastino = acp->ac_lastino;
char __user **ubufp = acp->ac_ubuffer;
- int ubleft = acp->ac_ubleft;
- int ubelem = acp->ac_ubelem;
- int chunkidx, clustidx;
+ int chunkidx;
int error = 0;
- xfs_agino_t agino;
+ xfs_agino_t agino = irbp->ir_startino;
- for (agino = irbp->ir_startino, chunkidx = clustidx = 0;
- XFS_BULKSTAT_UBLEFT(ubleft) &&
- irbp->ir_freecount < XFS_INODES_PER_CHUNK;
- chunkidx++, clustidx++, agino++) {
- int fmterror; /* bulkstat formatter result */
+ for (chunkidx = 0; chunkidx < XFS_INODES_PER_CHUNK;
+ chunkidx++, agino++) {
+ int fmterror;
int ubused;
- xfs_ino_t ino = XFS_AGINO_TO_INO(mp, agno, agino);
- ASSERT(chunkidx < XFS_INODES_PER_CHUNK);
+ /* inode won't fit in buffer, we are done */
+ if (acp->ac_ubleft < statstruct_size)
+ break;
/* Skip if this inode is free */
- if (XFS_INOBT_MASK(chunkidx) & irbp->ir_free) {
- lastino = ino;
+ if (XFS_INOBT_MASK(chunkidx) & irbp->ir_free)
continue;
- }
-
- /*
- * Count used inodes as free so we can tell when the
- * chunk is used up.
- */
- irbp->ir_freecount++;
/* Get the inode and fill in a single buffer */
ubused = statstruct_size;
- error = formatter(mp, ino, *ubufp, ubleft, &ubused, &fmterror);
- if (fmterror == BULKSTAT_RV_NOTHING) {
- if (error && error != -ENOENT && error != -EINVAL) {
- ubleft = 0;
- break;
- }
- lastino = ino;
- continue;
- }
- if (fmterror == BULKSTAT_RV_GIVEUP) {
- ubleft = 0;
+ error = formatter(mp, XFS_AGINO_TO_INO(mp, agno, agino),
+ *ubufp, acp->ac_ubleft, &ubused, &fmterror);
+
+ if (fmterror == BULKSTAT_RV_GIVEUP ||
+ (error && error != -ENOENT && error != -EINVAL)) {
+ acp->ac_ubleft = 0;
ASSERT(error);
break;
}
- if (*ubufp)
- *ubufp += ubused;
- ubleft -= ubused;
- ubelem++;
- lastino = ino;
+
+ /* be careful not to leak error if at end of chunk */
+ if (fmterror == BULKSTAT_RV_NOTHING || error) {
+ error = 0;
+ continue;
+ }
+
+ *ubufp += ubused;
+ acp->ac_ubleft -= ubused;
+ acp->ac_ubelem++;
}
- acp->ac_lastino = lastino;
- acp->ac_ubleft = ubleft;
- acp->ac_ubelem = ubelem;
+ /*
+ * Post-update *last_agino. At this point, agino will always point one
+ * inode past the last inode we processed successfully. Hence we
+ * substract that inode when setting the *last_agino cursor so that we
+ * return the correct cookie to userspace. On the next bulkstat call,
+ * the inode under the lastino cookie will be skipped as we have already
+ * processed it here.
+ */
+ *last_agino = agino - 1;
return error;
}
xfs_agino_t agino; /* inode # in allocation group */
xfs_agnumber_t agno; /* allocation group number */
xfs_btree_cur_t *cur; /* btree cursor for ialloc btree */
- int end_of_ag; /* set if we've seen the ag end */
- int error; /* error code */
- int fmterror;/* bulkstat formatter result */
- int i; /* loop index */
- int icount; /* count of inodes good in irbuf */
size_t irbsize; /* size of irec buffer in bytes */
- xfs_ino_t ino; /* inode number (filesystem) */
- xfs_inobt_rec_incore_t *irbp; /* current irec buffer pointer */
xfs_inobt_rec_incore_t *irbuf; /* start of irec buffer */
- xfs_inobt_rec_incore_t *irbufend; /* end of good irec buffer entries */
- xfs_ino_t lastino; /* last inode number returned */
int nirbuf; /* size of irbuf */
- int rval; /* return value error code */
- int tmp; /* result value from btree calls */
int ubcount; /* size of user's buffer */
- int ubleft; /* bytes left in user's buffer */
- char __user *ubufp; /* pointer into user's buffer */
- int ubelem; /* spaces used in user's buffer */
+ struct xfs_bulkstat_agichunk ac;
+ int error = 0;
/*
* Get the last inode value, see if there's nothing to do.
*/
- ino = (xfs_ino_t)*lastinop;
- lastino = ino;
- agno = XFS_INO_TO_AGNO(mp, ino);
- agino = XFS_INO_TO_AGINO(mp, ino);
+ agno = XFS_INO_TO_AGNO(mp, *lastinop);
+ agino = XFS_INO_TO_AGINO(mp, *lastinop);
if (agno >= mp->m_sb.sb_agcount ||
- ino != XFS_AGINO_TO_INO(mp, agno, agino)) {
+ *lastinop != XFS_AGINO_TO_INO(mp, agno, agino)) {
*done = 1;
*ubcountp = 0;
return 0;
}
ubcount = *ubcountp; /* statstruct's */
- ubleft = ubcount * statstruct_size; /* bytes */
- *ubcountp = ubelem = 0;
+ ac.ac_ubuffer = &ubuffer;
+ ac.ac_ubleft = ubcount * statstruct_size; /* bytes */;
+ ac.ac_ubelem = 0;
+
+ *ubcountp = 0;
*done = 0;
- fmterror = 0;
- ubufp = ubuffer;
+
irbuf = kmem_zalloc_greedy(&irbsize, PAGE_SIZE, PAGE_SIZE * 4);
if (!irbuf)
return -ENOMEM;
* Loop over the allocation groups, starting from the last
* inode returned; 0 means start of the allocation group.
*/
- rval = 0;
- while (XFS_BULKSTAT_UBLEFT(ubleft) && agno < mp->m_sb.sb_agcount) {
- cond_resched();
+ while (agno < mp->m_sb.sb_agcount) {
+ struct xfs_inobt_rec_incore *irbp = irbuf;
+ struct xfs_inobt_rec_incore *irbufend = irbuf + nirbuf;
+ bool end_of_ag = false;
+ int icount = 0;
+ int stat;
+
error = xfs_ialloc_read_agi(mp, NULL, agno, &agbp);
if (error)
break;
*/
cur = xfs_inobt_init_cursor(mp, NULL, agbp, agno,
XFS_BTNUM_INO);
- irbp = irbuf;
- irbufend = irbuf + nirbuf;
- end_of_ag = 0;
- icount = 0;
if (agino > 0) {
/*
* In the middle of an allocation group, we need to get
error = xfs_bulkstat_grab_ichunk(cur, agino, &icount, &r);
if (error)
- break;
+ goto del_cursor;
if (icount) {
irbp->ir_startino = r.ir_startino;
irbp->ir_freecount = r.ir_freecount;
irbp->ir_free = r.ir_free;
irbp++;
- agino = r.ir_startino + XFS_INODES_PER_CHUNK;
}
/* Increment to the next record */
- error = xfs_btree_increment(cur, 0, &tmp);
+ error = xfs_btree_increment(cur, 0, &stat);
} else {
/* Start of ag. Lookup the first inode chunk */
- error = xfs_inobt_lookup(cur, 0, XFS_LOOKUP_GE, &tmp);
+ error = xfs_inobt_lookup(cur, 0, XFS_LOOKUP_GE, &stat);
+ }
+ if (error || stat == 0) {
+ end_of_ag = true;
+ goto del_cursor;
}
- if (error)
- break;
/*
* Loop through inode btree records in this ag,
while (irbp < irbufend && icount < ubcount) {
struct xfs_inobt_rec_incore r;
- error = xfs_inobt_get_rec(cur, &r, &i);
- if (error || i == 0) {
- end_of_ag = 1;
- break;
+ error = xfs_inobt_get_rec(cur, &r, &stat);
+ if (error || stat == 0) {
+ end_of_ag = true;
+ goto del_cursor;
}
/*
irbp++;
icount += XFS_INODES_PER_CHUNK - r.ir_freecount;
}
- /*
- * Set agino to after this chunk and bump the cursor.
- */
- agino = r.ir_startino + XFS_INODES_PER_CHUNK;
- error = xfs_btree_increment(cur, 0, &tmp);
+ error = xfs_btree_increment(cur, 0, &stat);
+ if (error || stat == 0) {
+ end_of_ag = true;
+ goto del_cursor;
+ }
cond_resched();
}
+
/*
- * Drop the btree buffers and the agi buffer.
- * We can't hold any of the locks these represent
- * when calling iget.
+ * Drop the btree buffers and the agi buffer as we can't hold any
+ * of the locks these represent when calling iget. If there is a
+ * pending error, then we are done.
*/
+del_cursor:
xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR);
xfs_buf_relse(agbp);
+ if (error)
+ break;
/*
- * Now format all the good inodes into the user's buffer.
+ * Now format all the good inodes into the user's buffer. The
+ * call to xfs_bulkstat_ag_ichunk() sets up the agino pointer
+ * for the next loop iteration.
*/
irbufend = irbp;
for (irbp = irbuf;
- irbp < irbufend && XFS_BULKSTAT_UBLEFT(ubleft); irbp++) {
- struct xfs_bulkstat_agichunk ac;
-
- ac.ac_lastino = lastino;
- ac.ac_ubuffer = &ubuffer;
- ac.ac_ubleft = ubleft;
- ac.ac_ubelem = ubelem;
+ irbp < irbufend && ac.ac_ubleft >= statstruct_size;
+ irbp++) {
error = xfs_bulkstat_ag_ichunk(mp, agno, irbp,
- formatter, statstruct_size, &ac);
+ formatter, statstruct_size, &ac,
+ &agino);
if (error)
- rval = error;
-
- lastino = ac.ac_lastino;
- ubleft = ac.ac_ubleft;
- ubelem = ac.ac_ubelem;
+ break;
cond_resched();
}
+
/*
- * Set up for the next loop iteration.
+ * If we've run out of space or had a formatting error, we
+ * are now done
*/
- if (XFS_BULKSTAT_UBLEFT(ubleft)) {
- if (end_of_ag) {
- agno++;
- agino = 0;
- } else
- agino = XFS_INO_TO_AGINO(mp, lastino);
- } else
+ if (ac.ac_ubleft < statstruct_size || error)
break;
+
+ if (end_of_ag) {
+ agno++;
+ agino = 0;
+ }
}
/*
* Done, we're either out of filesystem or space to put the data.
*/
kmem_free(irbuf);
- *ubcountp = ubelem;
+ *ubcountp = ac.ac_ubelem;
+
/*
- * Found some inodes, return them now and return the error next time.
+ * We found some inodes, so clear the error status and return them.
+ * The lastino pointer will point directly at the inode that triggered
+ * any error that occurred, so on the next call the error will be
+ * triggered again and propagated to userspace as there will be no
+ * formatted inodes in the buffer.
*/
- if (ubelem)
- rval = 0;
- if (agno >= mp->m_sb.sb_agcount) {
- /*
- * If we ran out of filesystem, mark lastino as off
- * the end of the filesystem, so the next call
- * will return immediately.
- */
- *lastinop = (xfs_ino_t)XFS_AGINO_TO_INO(mp, agno, 0);
+ if (ac.ac_ubelem)
+ error = 0;
+
+ /*
+ * If we ran out of filesystem, lastino will point off the end of
+ * the filesystem so the next call will return immediately.
+ */
+ *lastinop = XFS_AGINO_TO_INO(mp, agno, agino);
+ if (agno >= mp->m_sb.sb_agcount)
*done = 1;
- } else
- *lastinop = (xfs_ino_t)lastino;
- return rval;
+ return error;
}
int
int *ubused,
int *stat);
-struct xfs_bulkstat_agichunk {
- xfs_ino_t ac_lastino; /* last inode returned */
- char __user **ac_ubuffer;/* pointer into user's buffer */
- int ac_ubleft; /* bytes left in user's buffer */
- int ac_ubelem; /* spaces used in user's buffer */
-};
-
-int
-xfs_bulkstat_ag_ichunk(
- struct xfs_mount *mp,
- xfs_agnumber_t agno,
- struct xfs_inobt_rec_incore *irbp,
- bulkstat_one_pf formatter,
- size_t statstruct_size,
- struct xfs_bulkstat_agichunk *acp);
-
/*
* Values for stat return value.
*/
#define METHOD_NAME__CBA "_CBA"
#define METHOD_NAME__CID "_CID"
#define METHOD_NAME__CRS "_CRS"
+#define METHOD_NAME__DDN "_DDN"
#define METHOD_NAME__HID "_HID"
#define METHOD_NAME__INI "_INI"
#define METHOD_NAME__PLD "_PLD"
int acpi_bus_init_power(struct acpi_device *device);
int acpi_device_fix_up_power(struct acpi_device *device);
int acpi_bus_update_power(acpi_handle handle, int *state_p);
+int acpi_device_update_power(struct acpi_device *device, int *state_p);
bool acpi_bus_power_manageable(acpi_handle handle);
#ifdef CONFIG_PM
/* Current ACPICA subsystem version in YYYYMMDD format */
-#define ACPI_CA_VERSION 0x20140828
+#define ACPI_CA_VERSION 0x20140926
#include <acpi/acconfig.h>
#include <acpi/actypes.h>
* | | | +--- Enabled for wake?
* | | +----- Set?
* | +------- Has a handler?
- * +----------- <Reserved>
+ * +------------- <Reserved>
*/
typedef u32 acpi_event_status;
#define ACPI_EVENT_FLAG_ENABLED (acpi_event_status) 0x01
#define ACPI_EVENT_FLAG_WAKE_ENABLED (acpi_event_status) 0x02
#define ACPI_EVENT_FLAG_SET (acpi_event_status) 0x04
-#define ACPI_EVENT_FLAG_HANDLE (acpi_event_status) 0x08
+#define ACPI_EVENT_FLAG_HAS_HANDLER (acpi_event_status) 0x08
/* Actions for acpi_set_gpe, acpi_gpe_wakeup, acpi_hw_low_set_gpe */
#include <linux/uaccess.h>
#include <asm/errno.h>
+#ifndef CONFIG_SMP
+/*
+ * The following implementation only for uniprocessor machines.
+ * For UP, it's relies on the fact that pagefault_disable() also disables
+ * preemption to ensure mutual exclusion.
+ *
+ */
+
+/**
+ * futex_atomic_op_inuser() - Atomic arithmetic operation with constant
+ * argument and comparison of the previous
+ * futex value with another constant.
+ *
+ * @encoded_op: encoded operation to execute
+ * @uaddr: pointer to user space address
+ *
+ * Return:
+ * 0 - On success
+ * <0 - On error
+ */
+static inline int
+futex_atomic_op_inuser(int encoded_op, u32 __user *uaddr)
+{
+ int op = (encoded_op >> 28) & 7;
+ int cmp = (encoded_op >> 24) & 15;
+ int oparg = (encoded_op << 8) >> 20;
+ int cmparg = (encoded_op << 20) >> 20;
+ int oldval, ret;
+ u32 tmp;
+
+ if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+ oparg = 1 << oparg;
+
+ pagefault_disable();
+
+ ret = -EFAULT;
+ if (unlikely(get_user(oldval, uaddr) != 0))
+ goto out_pagefault_enable;
+
+ ret = 0;
+ tmp = oldval;
+
+ switch (op) {
+ case FUTEX_OP_SET:
+ tmp = oparg;
+ break;
+ case FUTEX_OP_ADD:
+ tmp += oparg;
+ break;
+ case FUTEX_OP_OR:
+ tmp |= oparg;
+ break;
+ case FUTEX_OP_ANDN:
+ tmp &= ~oparg;
+ break;
+ case FUTEX_OP_XOR:
+ tmp ^= oparg;
+ break;
+ default:
+ ret = -ENOSYS;
+ }
+
+ if (ret == 0 && unlikely(put_user(tmp, uaddr) != 0))
+ ret = -EFAULT;
+
+out_pagefault_enable:
+ pagefault_enable();
+
+ if (ret == 0) {
+ switch (cmp) {
+ case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+ case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+ case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+ case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+ case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+ case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+ default: ret = -ENOSYS;
+ }
+ }
+ return ret;
+}
+
+/**
+ * futex_atomic_cmpxchg_inatomic() - Compare and exchange the content of the
+ * uaddr with newval if the current value is
+ * oldval.
+ * @uval: pointer to store content of @uaddr
+ * @uaddr: pointer to user space address
+ * @oldval: old value
+ * @newval: new value to store to @uaddr
+ *
+ * Return:
+ * 0 - On success
+ * <0 - On error
+ */
+static inline int
+futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr,
+ u32 oldval, u32 newval)
+{
+ u32 val;
+
+ if (unlikely(get_user(val, uaddr) != 0))
+ return -EFAULT;
+
+ if (val == oldval && unlikely(put_user(newval, uaddr) != 0))
+ return -EFAULT;
+
+ *uval = val;
+
+ return 0;
+}
+
+#else
static inline int
futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr)
{
return -ENOSYS;
}
+#endif /* CONFIG_SMP */
#endif
#define __ASM_GENERIC_IO_H
#include <asm/page.h> /* I/O is all done through memory accesses */
+#include <linux/string.h> /* for memset() and memcpy() */
#include <linux/types.h>
#ifdef CONFIG_GENERIC_IOMAP
#define mmiowb() do {} while (0)
#endif
-/*****************************************************************************/
/*
- * readX/writeX() are used to access memory mapped devices. On some
- * architectures the memory mapped IO stuff needs to be accessed
- * differently. On the simple architectures, we just read/write the
- * memory location directly.
+ * __raw_{read,write}{b,w,l,q}() access memory in native endianness.
+ *
+ * On some architectures memory mapped IO needs to be accessed differently.
+ * On the simple architectures, we just read/write the memory location
+ * directly.
*/
+
#ifndef __raw_readb
+#define __raw_readb __raw_readb
static inline u8 __raw_readb(const volatile void __iomem *addr)
{
- return *(const volatile u8 __force *) addr;
+ return *(const volatile u8 __force *)addr;
}
#endif
#ifndef __raw_readw
+#define __raw_readw __raw_readw
static inline u16 __raw_readw(const volatile void __iomem *addr)
{
- return *(const volatile u16 __force *) addr;
+ return *(const volatile u16 __force *)addr;
}
#endif
#ifndef __raw_readl
+#define __raw_readl __raw_readl
static inline u32 __raw_readl(const volatile void __iomem *addr)
{
- return *(const volatile u32 __force *) addr;
+ return *(const volatile u32 __force *)addr;
}
#endif
-#define readb __raw_readb
-
-#define readw readw
-static inline u16 readw(const volatile void __iomem *addr)
-{
- return __le16_to_cpu(__raw_readw(addr));
-}
-
-#define readl readl
-static inline u32 readl(const volatile void __iomem *addr)
+#ifdef CONFIG_64BIT
+#ifndef __raw_readq
+#define __raw_readq __raw_readq
+static inline u64 __raw_readq(const volatile void __iomem *addr)
{
- return __le32_to_cpu(__raw_readl(addr));
+ return *(const volatile u64 __force *)addr;
}
+#endif
+#endif /* CONFIG_64BIT */
#ifndef __raw_writeb
-static inline void __raw_writeb(u8 b, volatile void __iomem *addr)
+#define __raw_writeb __raw_writeb
+static inline void __raw_writeb(u8 value, volatile void __iomem *addr)
{
- *(volatile u8 __force *) addr = b;
+ *(volatile u8 __force *)addr = value;
}
#endif
#ifndef __raw_writew
-static inline void __raw_writew(u16 b, volatile void __iomem *addr)
+#define __raw_writew __raw_writew
+static inline void __raw_writew(u16 value, volatile void __iomem *addr)
{
- *(volatile u16 __force *) addr = b;
+ *(volatile u16 __force *)addr = value;
}
#endif
#ifndef __raw_writel
-static inline void __raw_writel(u32 b, volatile void __iomem *addr)
+#define __raw_writel __raw_writel
+static inline void __raw_writel(u32 value, volatile void __iomem *addr)
{
- *(volatile u32 __force *) addr = b;
+ *(volatile u32 __force *)addr = value;
}
#endif
-#define writeb __raw_writeb
-#define writew(b,addr) __raw_writew(__cpu_to_le16(b),addr)
-#define writel(b,addr) __raw_writel(__cpu_to_le32(b),addr)
-
#ifdef CONFIG_64BIT
-#ifndef __raw_readq
-static inline u64 __raw_readq(const volatile void __iomem *addr)
+#ifndef __raw_writeq
+#define __raw_writeq __raw_writeq
+static inline void __raw_writeq(u64 value, volatile void __iomem *addr)
{
- return *(const volatile u64 __force *) addr;
+ *(volatile u64 __force *)addr = value;
}
#endif
+#endif /* CONFIG_64BIT */
-#define readq readq
-static inline u64 readq(const volatile void __iomem *addr)
-{
- return __le64_to_cpu(__raw_readq(addr));
-}
+/*
+ * {read,write}{b,w,l,q}() access little endian memory and return result in
+ * native endianness.
+ */
-#ifndef __raw_writeq
-static inline void __raw_writeq(u64 b, volatile void __iomem *addr)
+#ifndef readb
+#define readb readb
+static inline u8 readb(const volatile void __iomem *addr)
{
- *(volatile u64 __force *) addr = b;
+ return __raw_readb(addr);
}
#endif
-#define writeq(b, addr) __raw_writeq(__cpu_to_le64(b), addr)
-#endif /* CONFIG_64BIT */
-
-#ifndef PCI_IOBASE
-#define PCI_IOBASE ((void __iomem *) 0)
+#ifndef readw
+#define readw readw
+static inline u16 readw(const volatile void __iomem *addr)
+{
+ return __le16_to_cpu(__raw_readw(addr));
+}
#endif
-/*****************************************************************************/
-/*
- * traditional input/output functions
- */
-
-static inline u8 inb(unsigned long addr)
+#ifndef readl
+#define readl readl
+static inline u32 readl(const volatile void __iomem *addr)
{
- return readb(addr + PCI_IOBASE);
+ return __le32_to_cpu(__raw_readl(addr));
}
+#endif
-static inline u16 inw(unsigned long addr)
+#ifdef CONFIG_64BIT
+#ifndef readq
+#define readq readq
+static inline u64 readq(const volatile void __iomem *addr)
{
- return readw(addr + PCI_IOBASE);
+ return __le64_to_cpu(__raw_readq(addr));
}
+#endif
+#endif /* CONFIG_64BIT */
-static inline u32 inl(unsigned long addr)
+#ifndef writeb
+#define writeb writeb
+static inline void writeb(u8 value, volatile void __iomem *addr)
{
- return readl(addr + PCI_IOBASE);
+ __raw_writeb(value, addr);
}
+#endif
-static inline void outb(u8 b, unsigned long addr)
+#ifndef writew
+#define writew writew
+static inline void writew(u16 value, volatile void __iomem *addr)
{
- writeb(b, addr + PCI_IOBASE);
+ __raw_writew(cpu_to_le16(value), addr);
}
+#endif
-static inline void outw(u16 b, unsigned long addr)
+#ifndef writel
+#define writel writel
+static inline void writel(u32 value, volatile void __iomem *addr)
{
- writew(b, addr + PCI_IOBASE);
+ __raw_writel(__cpu_to_le32(value), addr);
}
+#endif
-static inline void outl(u32 b, unsigned long addr)
+#ifdef CONFIG_64BIT
+#ifndef writeq
+#define writeq writeq
+static inline void writeq(u64 value, volatile void __iomem *addr)
{
- writel(b, addr + PCI_IOBASE);
+ __raw_writeq(__cpu_to_le64(value), addr);
}
+#endif
+#endif /* CONFIG_64BIT */
+
+/*
+ * {read,write}{b,w,l,q}_relaxed() are like the regular version, but
+ * are not guaranteed to provide ordering against spinlocks or memory
+ * accesses.
+ */
+#ifndef readb_relaxed
+#define readb_relaxed readb
+#endif
-#define inb_p(addr) inb(addr)
-#define inw_p(addr) inw(addr)
-#define inl_p(addr) inl(addr)
-#define outb_p(x, addr) outb((x), (addr))
-#define outw_p(x, addr) outw((x), (addr))
-#define outl_p(x, addr) outl((x), (addr))
+#ifndef readw_relaxed
+#define readw_relaxed readw
+#endif
-#ifndef insb
-static inline void insb(unsigned long addr, void *buffer, int count)
+#ifndef readl_relaxed
+#define readl_relaxed readl
+#endif
+
+#ifndef readq_relaxed
+#define readq_relaxed readq
+#endif
+
+#ifndef writeb_relaxed
+#define writeb_relaxed writeb
+#endif
+
+#ifndef writew_relaxed
+#define writew_relaxed writew
+#endif
+
+#ifndef writel_relaxed
+#define writel_relaxed writel
+#endif
+
+#ifndef writeq_relaxed
+#define writeq_relaxed writeq
+#endif
+
+/*
+ * {read,write}s{b,w,l,q}() repeatedly access the same memory address in
+ * native endianness in 8-, 16-, 32- or 64-bit chunks (@count times).
+ */
+#ifndef readsb
+#define readsb readsb
+static inline void readsb(const volatile void __iomem *addr, void *buffer,
+ unsigned int count)
{
if (count) {
u8 *buf = buffer;
+
do {
- u8 x = __raw_readb(addr + PCI_IOBASE);
+ u8 x = __raw_readb(addr);
*buf++ = x;
} while (--count);
}
}
#endif
-#ifndef insw
-static inline void insw(unsigned long addr, void *buffer, int count)
+#ifndef readsw
+#define readsw readsw
+static inline void readsw(const volatile void __iomem *addr, void *buffer,
+ unsigned int count)
{
if (count) {
u16 *buf = buffer;
+
do {
- u16 x = __raw_readw(addr + PCI_IOBASE);
+ u16 x = __raw_readw(addr);
*buf++ = x;
} while (--count);
}
}
#endif
-#ifndef insl
-static inline void insl(unsigned long addr, void *buffer, int count)
+#ifndef readsl
+#define readsl readsl
+static inline void readsl(const volatile void __iomem *addr, void *buffer,
+ unsigned int count)
{
if (count) {
u32 *buf = buffer;
+
do {
- u32 x = __raw_readl(addr + PCI_IOBASE);
+ u32 x = __raw_readl(addr);
*buf++ = x;
} while (--count);
}
}
#endif
-#ifndef outsb
-static inline void outsb(unsigned long addr, const void *buffer, int count)
+#ifdef CONFIG_64BIT
+#ifndef readsq
+#define readsq readsq
+static inline void readsq(const volatile void __iomem *addr, void *buffer,
+ unsigned int count)
+{
+ if (count) {
+ u64 *buf = buffer;
+
+ do {
+ u64 x = __raw_readq(addr);
+ *buf++ = x;
+ } while (--count);
+ }
+}
+#endif
+#endif /* CONFIG_64BIT */
+
+#ifndef writesb
+#define writesb writesb
+static inline void writesb(volatile void __iomem *addr, const void *buffer,
+ unsigned int count)
{
if (count) {
const u8 *buf = buffer;
+
do {
- __raw_writeb(*buf++, addr + PCI_IOBASE);
+ __raw_writeb(*buf++, addr);
} while (--count);
}
}
#endif
-#ifndef outsw
-static inline void outsw(unsigned long addr, const void *buffer, int count)
+#ifndef writesw
+#define writesw writesw
+static inline void writesw(volatile void __iomem *addr, const void *buffer,
+ unsigned int count)
{
if (count) {
const u16 *buf = buffer;
+
do {
- __raw_writew(*buf++, addr + PCI_IOBASE);
+ __raw_writew(*buf++, addr);
} while (--count);
}
}
#endif
-#ifndef outsl
-static inline void outsl(unsigned long addr, const void *buffer, int count)
+#ifndef writesl
+#define writesl writesl
+static inline void writesl(volatile void __iomem *addr, const void *buffer,
+ unsigned int count)
{
if (count) {
const u32 *buf = buffer;
+
do {
- __raw_writel(*buf++, addr + PCI_IOBASE);
+ __raw_writel(*buf++, addr);
} while (--count);
}
}
#endif
-#ifndef CONFIG_GENERIC_IOMAP
-#define ioread8(addr) readb(addr)
-#define ioread16(addr) readw(addr)
-#define ioread16be(addr) __be16_to_cpu(__raw_readw(addr))
-#define ioread32(addr) readl(addr)
-#define ioread32be(addr) __be32_to_cpu(__raw_readl(addr))
-
-#define iowrite8(v, addr) writeb((v), (addr))
-#define iowrite16(v, addr) writew((v), (addr))
-#define iowrite16be(v, addr) __raw_writew(__cpu_to_be16(v), addr)
-#define iowrite32(v, addr) writel((v), (addr))
-#define iowrite32be(v, addr) __raw_writel(__cpu_to_be32(v), addr)
-
-#define ioread8_rep(p, dst, count) \
- insb((unsigned long) (p), (dst), (count))
-#define ioread16_rep(p, dst, count) \
- insw((unsigned long) (p), (dst), (count))
-#define ioread32_rep(p, dst, count) \
- insl((unsigned long) (p), (dst), (count))
-
-#define iowrite8_rep(p, src, count) \
- outsb((unsigned long) (p), (src), (count))
-#define iowrite16_rep(p, src, count) \
- outsw((unsigned long) (p), (src), (count))
-#define iowrite32_rep(p, src, count) \
- outsl((unsigned long) (p), (src), (count))
-#endif /* CONFIG_GENERIC_IOMAP */
+#ifdef CONFIG_64BIT
+#ifndef writesq
+#define writesq writesq
+static inline void writesq(volatile void __iomem *addr, const void *buffer,
+ unsigned int count)
+{
+ if (count) {
+ const u64 *buf = buffer;
+
+ do {
+ __raw_writeq(*buf++, addr);
+ } while (--count);
+ }
+}
+#endif
+#endif /* CONFIG_64BIT */
+
+#ifndef PCI_IOBASE
+#define PCI_IOBASE ((void __iomem *)0)
+#endif
#ifndef IO_SPACE_LIMIT
#define IO_SPACE_LIMIT 0xffff
#endif
+/*
+ * {in,out}{b,w,l}() access little endian I/O. {in,out}{b,w,l}_p() can be
+ * implemented on hardware that needs an additional delay for I/O accesses to
+ * take effect.
+ */
+
+#ifndef inb
+#define inb inb
+static inline u8 inb(unsigned long addr)
+{
+ return readb(PCI_IOBASE + addr);
+}
+#endif
+
+#ifndef inw
+#define inw inw
+static inline u16 inw(unsigned long addr)
+{
+ return readw(PCI_IOBASE + addr);
+}
+#endif
+
+#ifndef inl
+#define inl inl
+static inline u32 inl(unsigned long addr)
+{
+ return readl(PCI_IOBASE + addr);
+}
+#endif
+
+#ifndef outb
+#define outb outb
+static inline void outb(u8 value, unsigned long addr)
+{
+ writeb(value, PCI_IOBASE + addr);
+}
+#endif
+
+#ifndef outw
+#define outw outw
+static inline void outw(u16 value, unsigned long addr)
+{
+ writew(value, PCI_IOBASE + addr);
+}
+#endif
+
+#ifndef outl
+#define outl outl
+static inline void outl(u32 value, unsigned long addr)
+{
+ writel(value, PCI_IOBASE + addr);
+}
+#endif
+
+#ifndef inb_p
+#define inb_p inb_p
+static inline u8 inb_p(unsigned long addr)
+{
+ return inb(addr);
+}
+#endif
+
+#ifndef inw_p
+#define inw_p inw_p
+static inline u16 inw_p(unsigned long addr)
+{
+ return inw(addr);
+}
+#endif
+
+#ifndef inl_p
+#define inl_p inl_p
+static inline u32 inl_p(unsigned long addr)
+{
+ return inl(addr);
+}
+#endif
+
+#ifndef outb_p
+#define outb_p outb_p
+static inline void outb_p(u8 value, unsigned long addr)
+{
+ outb(value, addr);
+}
+#endif
+
+#ifndef outw_p
+#define outw_p outw_p
+static inline void outw_p(u16 value, unsigned long addr)
+{
+ outw(value, addr);
+}
+#endif
+
+#ifndef outl_p
+#define outl_p outl_p
+static inline void outl_p(u32 value, unsigned long addr)
+{
+ outl(value, addr);
+}
+#endif
+
+/*
+ * {in,out}s{b,w,l}{,_p}() are variants of the above that repeatedly access a
+ * single I/O port multiple times.
+ */
+
+#ifndef insb
+#define insb insb
+static inline void insb(unsigned long addr, void *buffer, unsigned int count)
+{
+ readsb(PCI_IOBASE + addr, buffer, count);
+}
+#endif
+
+#ifndef insw
+#define insw insw
+static inline void insw(unsigned long addr, void *buffer, unsigned int count)
+{
+ readsw(PCI_IOBASE + addr, buffer, count);
+}
+#endif
+
+#ifndef insl
+#define insl insl
+static inline void insl(unsigned long addr, void *buffer, unsigned int count)
+{
+ readsl(PCI_IOBASE + addr, buffer, count);
+}
+#endif
+
+#ifndef outsb
+#define outsb outsb
+static inline void outsb(unsigned long addr, const void *buffer,
+ unsigned int count)
+{
+ writesb(PCI_IOBASE + addr, buffer, count);
+}
+#endif
+
+#ifndef outsw
+#define outsw outsw
+static inline void outsw(unsigned long addr, const void *buffer,
+ unsigned int count)
+{
+ writesw(PCI_IOBASE + addr, buffer, count);
+}
+#endif
+
+#ifndef outsl
+#define outsl outsl
+static inline void outsl(unsigned long addr, const void *buffer,
+ unsigned int count)
+{
+ writesl(PCI_IOBASE + addr, buffer, count);
+}
+#endif
+
+#ifndef insb_p
+#define insb_p insb_p
+static inline void insb_p(unsigned long addr, void *buffer, unsigned int count)
+{
+ insb(addr, buffer, count);
+}
+#endif
+
+#ifndef insw_p
+#define insw_p insw_p
+static inline void insw_p(unsigned long addr, void *buffer, unsigned int count)
+{
+ insw(addr, buffer, count);
+}
+#endif
+
+#ifndef insl_p
+#define insl_p insl_p
+static inline void insl_p(unsigned long addr, void *buffer, unsigned int count)
+{
+ insl(addr, buffer, count);
+}
+#endif
+
+#ifndef outsb_p
+#define outsb_p outsb_p
+static inline void outsb_p(unsigned long addr, const void *buffer,
+ unsigned int count)
+{
+ outsb(addr, buffer, count);
+}
+#endif
+
+#ifndef outsw_p
+#define outsw_p outsw_p
+static inline void outsw_p(unsigned long addr, const void *buffer,
+ unsigned int count)
+{
+ outsw(addr, buffer, count);
+}
+#endif
+
+#ifndef outsl_p
+#define outsl_p outsl_p
+static inline void outsl_p(unsigned long addr, const void *buffer,
+ unsigned int count)
+{
+ outsl(addr, buffer, count);
+}
+#endif
+
+#ifndef CONFIG_GENERIC_IOMAP
+#ifndef ioread8
+#define ioread8 ioread8
+static inline u8 ioread8(const volatile void __iomem *addr)
+{
+ return readb(addr);
+}
+#endif
+
+#ifndef ioread16
+#define ioread16 ioread16
+static inline u16 ioread16(const volatile void __iomem *addr)
+{
+ return readw(addr);
+}
+#endif
+
+#ifndef ioread32
+#define ioread32 ioread32
+static inline u32 ioread32(const volatile void __iomem *addr)
+{
+ return readl(addr);
+}
+#endif
+
+#ifndef iowrite8
+#define iowrite8 iowrite8
+static inline void iowrite8(u8 value, volatile void __iomem *addr)
+{
+ writeb(value, addr);
+}
+#endif
+
+#ifndef iowrite16
+#define iowrite16 iowrite16
+static inline void iowrite16(u16 value, volatile void __iomem *addr)
+{
+ writew(value, addr);
+}
+#endif
+
+#ifndef iowrite32
+#define iowrite32 iowrite32
+static inline void iowrite32(u32 value, volatile void __iomem *addr)
+{
+ writel(value, addr);
+}
+#endif
+
+#ifndef ioread16be
+#define ioread16be ioread16be
+static inline u16 ioread16be(const volatile void __iomem *addr)
+{
+ return __be16_to_cpu(__raw_readw(addr));
+}
+#endif
+
+#ifndef ioread32be
+#define ioread32be ioread32be
+static inline u32 ioread32be(const volatile void __iomem *addr)
+{
+ return __be32_to_cpu(__raw_readl(addr));
+}
+#endif
+
+#ifndef iowrite16be
+#define iowrite16be iowrite16be
+static inline void iowrite16be(u16 value, void volatile __iomem *addr)
+{
+ __raw_writew(__cpu_to_be16(value), addr);
+}
+#endif
+
+#ifndef iowrite32be
+#define iowrite32be iowrite32be
+static inline void iowrite32be(u32 value, volatile void __iomem *addr)
+{
+ __raw_writel(__cpu_to_be32(value), addr);
+}
+#endif
+
+#ifndef ioread8_rep
+#define ioread8_rep ioread8_rep
+static inline void ioread8_rep(const volatile void __iomem *addr, void *buffer,
+ unsigned int count)
+{
+ readsb(addr, buffer, count);
+}
+#endif
+
+#ifndef ioread16_rep
+#define ioread16_rep ioread16_rep
+static inline void ioread16_rep(const volatile void __iomem *addr,
+ void *buffer, unsigned int count)
+{
+ readsw(addr, buffer, count);
+}
+#endif
+
+#ifndef ioread32_rep
+#define ioread32_rep ioread32_rep
+static inline void ioread32_rep(const volatile void __iomem *addr,
+ void *buffer, unsigned int count)
+{
+ readsl(addr, buffer, count);
+}
+#endif
+
+#ifndef iowrite8_rep
+#define iowrite8_rep iowrite8_rep
+static inline void iowrite8_rep(volatile void __iomem *addr,
+ const void *buffer,
+ unsigned int count)
+{
+ writesb(addr, buffer, count);
+}
+#endif
+
+#ifndef iowrite16_rep
+#define iowrite16_rep iowrite16_rep
+static inline void iowrite16_rep(volatile void __iomem *addr,
+ const void *buffer,
+ unsigned int count)
+{
+ writesw(addr, buffer, count);
+}
+#endif
+
+#ifndef iowrite32_rep
+#define iowrite32_rep iowrite32_rep
+static inline void iowrite32_rep(volatile void __iomem *addr,
+ const void *buffer,
+ unsigned int count)
+{
+ writesl(addr, buffer, count);
+}
+#endif
+#endif /* CONFIG_GENERIC_IOMAP */
+
#ifdef __KERNEL__
#include <linux/vmalloc.h>
-#define __io_virt(x) ((void __force *) (x))
+#define __io_virt(x) ((void __force *)(x))
#ifndef CONFIG_GENERIC_IOMAP
struct pci_dev;
extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
#ifndef pci_iounmap
+#define pci_iounmap pci_iounmap
static inline void pci_iounmap(struct pci_dev *dev, void __iomem *p)
{
}
* These are pretty trivial
*/
#ifndef virt_to_phys
+#define virt_to_phys virt_to_phys
static inline unsigned long virt_to_phys(volatile void *address)
{
return __pa((unsigned long)address);
}
+#endif
+#ifndef phys_to_virt
+#define phys_to_virt phys_to_virt
static inline void *phys_to_virt(unsigned long address)
{
return __va(address);
* This implementation is for the no-MMU case only... if you have an MMU
* you'll need to provide your own definitions.
*/
+
#ifndef CONFIG_MMU
-static inline void __iomem *ioremap(phys_addr_t offset, unsigned long size)
+#ifndef ioremap
+#define ioremap ioremap
+static inline void __iomem *ioremap(phys_addr_t offset, size_t size)
{
- return (void __iomem*) (unsigned long)offset;
+ return (void __iomem *)(unsigned long)offset;
}
+#endif
-#define __ioremap(offset, size, flags) ioremap(offset, size)
+#ifndef __ioremap
+#define __ioremap __ioremap
+static inline void __iomem *__ioremap(phys_addr_t offset, size_t size,
+ unsigned long flags)
+{
+ return ioremap(offset, size);
+}
+#endif
#ifndef ioremap_nocache
-#define ioremap_nocache ioremap
+#define ioremap_nocache ioremap_nocache
+static inline void __iomem *ioremap_nocache(phys_addr_t offset, size_t size)
+{
+ return ioremap(offset, size);
+}
#endif
#ifndef ioremap_wc
-#define ioremap_wc ioremap_nocache
+#define ioremap_wc ioremap_wc
+static inline void __iomem *ioremap_wc(phys_addr_t offset, size_t size)
+{
+ return ioremap_nocache(offset, size);
+}
#endif
+#ifndef iounmap
+#define iounmap iounmap
static inline void iounmap(void __iomem *addr)
{
}
+#endif
#endif /* CONFIG_MMU */
#ifdef CONFIG_HAS_IOPORT_MAP
#ifndef CONFIG_GENERIC_IOMAP
+#ifndef ioport_map
+#define ioport_map ioport_map
static inline void __iomem *ioport_map(unsigned long port, unsigned int nr)
{
return PCI_IOBASE + (port & IO_SPACE_LIMIT);
}
+#endif
+#ifndef ioport_unmap
+#define ioport_unmap ioport_unmap
static inline void ioport_unmap(void __iomem *p)
{
}
+#endif
#else /* CONFIG_GENERIC_IOMAP */
extern void __iomem *ioport_map(unsigned long port, unsigned int nr);
extern void ioport_unmap(void __iomem *p);
#endif /* CONFIG_HAS_IOPORT_MAP */
#ifndef xlate_dev_kmem_ptr
-#define xlate_dev_kmem_ptr(p) p
+#define xlate_dev_kmem_ptr xlate_dev_kmem_ptr
+static inline void *xlate_dev_kmem_ptr(void *addr)
+{
+ return addr;
+}
#endif
+
#ifndef xlate_dev_mem_ptr
-#define xlate_dev_mem_ptr(p) __va(p)
+#define xlate_dev_mem_ptr xlate_dev_mem_ptr
+static inline void *xlate_dev_mem_ptr(phys_addr_t addr)
+{
+ return __va(addr);
+}
+#endif
+
+#ifndef unxlate_dev_mem_ptr
+#define unxlate_dev_mem_ptr unxlate_dev_mem_ptr
+static inline void unxlate_dev_mem_ptr(phys_addr_t phys, void *addr)
+{
+}
#endif
#ifdef CONFIG_VIRT_TO_BUS
#ifndef virt_to_bus
-static inline unsigned long virt_to_bus(volatile void *address)
+static inline unsigned long virt_to_bus(void *address)
{
- return ((unsigned long) address);
+ return (unsigned long)address;
}
static inline void *bus_to_virt(unsigned long address)
{
- return (void *) address;
+ return (void *)address;
}
#endif
#endif
#ifndef memset_io
-#define memset_io(a, b, c) memset(__io_virt(a), (b), (c))
+#define memset_io memset_io
+static inline void memset_io(volatile void __iomem *addr, int value,
+ size_t size)
+{
+ memset(__io_virt(addr), value, size);
+}
#endif
#ifndef memcpy_fromio
-#define memcpy_fromio(a, b, c) memcpy((a), __io_virt(b), (c))
+#define memcpy_fromio memcpy_fromio
+static inline void memcpy_fromio(void *buffer,
+ const volatile void __iomem *addr,
+ size_t size)
+{
+ memcpy(buffer, __io_virt(addr), size);
+}
#endif
+
#ifndef memcpy_toio
-#define memcpy_toio(a, b, c) memcpy(__io_virt(a), (b), (c))
+#define memcpy_toio memcpy_toio
+static inline void memcpy_toio(volatile void __iomem *addr, const void *buffer,
+ size_t size)
+{
+ memcpy(__io_virt(addr), buffer, size);
+}
#endif
#endif /* __KERNEL__ */
/*
* must be macros to avoid header recursion hell
*/
-#define task_preempt_count(p) \
- (task_thread_info(p)->preempt_count & ~PREEMPT_NEED_RESCHED)
-
#define init_task_preempt_count(p) do { \
task_thread_info(p)->preempt_count = PREEMPT_DISABLED; \
} while (0)
--- /dev/null
+/*
+ * include/asm-generic/seccomp.h
+ *
+ * Copyright (C) 2014 Linaro Limited
+ * Author: AKASHI Takahiro <takahiro.akashi@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef _ASM_GENERIC_SECCOMP_H
+#define _ASM_GENERIC_SECCOMP_H
+
+#include <linux/unistd.h>
+
+#if defined(CONFIG_COMPAT) && !defined(__NR_seccomp_read_32)
+#define __NR_seccomp_read_32 __NR_read
+#define __NR_seccomp_write_32 __NR_write
+#define __NR_seccomp_exit_32 __NR_exit
+#define __NR_seccomp_sigreturn_32 __NR_rt_sigreturn
+#endif /* CONFIG_COMPAT && ! already defined */
+
+#define __NR_seccomp_read __NR_read
+#define __NR_seccomp_write __NR_write
+#define __NR_seccomp_exit __NR_exit
+#ifndef __NR_seccomp_sigreturn
+#define __NR_seccomp_sigreturn __NR_rt_sigreturn
+#endif
+
+#endif /* _ASM_GENERIC_SECCOMP_H */
#endif
unsigned long start;
unsigned long end;
- unsigned int need_flush : 1, /* Did free PTEs */
/* we are in the middle of an operation to clear
* a full mm and can make some optimizations */
- fullmm : 1,
+ unsigned int fullmm : 1,
/* we have performed an operation which
* requires a complete flush of the tlb */
need_flush_all : 1;
tlb_flush_mmu(tlb);
}
+static inline void __tlb_adjust_range(struct mmu_gather *tlb,
+ unsigned long address)
+{
+ tlb->start = min(tlb->start, address);
+ tlb->end = max(tlb->end, address + PAGE_SIZE);
+}
+
+static inline void __tlb_reset_range(struct mmu_gather *tlb)
+{
+ tlb->start = TASK_SIZE;
+ tlb->end = 0;
+}
+
+/*
+ * In the case of tlb vma handling, we can optimise these away in the
+ * case where we're doing a full MM flush. When we're doing a munmap,
+ * the vmas are adjusted to only cover the region to be torn down.
+ */
+#ifndef tlb_start_vma
+#define tlb_start_vma(tlb, vma) do { } while (0)
+#endif
+
+#define __tlb_end_vma(tlb, vma) \
+ do { \
+ if (!tlb->fullmm && tlb->end) { \
+ tlb_flush(tlb); \
+ __tlb_reset_range(tlb); \
+ } \
+ } while (0)
+
+#ifndef tlb_end_vma
+#define tlb_end_vma __tlb_end_vma
+#endif
+
+#ifndef __tlb_remove_tlb_entry
+#define __tlb_remove_tlb_entry(tlb, ptep, address) do { } while (0)
+#endif
+
/**
* tlb_remove_tlb_entry - remember a pte unmapping for later tlb invalidation.
*
- * Record the fact that pte's were really umapped in ->need_flush, so we can
- * later optimise away the tlb invalidate. This helps when userspace is
- * unmapping already-unmapped pages, which happens quite a lot.
+ * Record the fact that pte's were really unmapped by updating the range,
+ * so we can later optimise away the tlb invalidate. This helps when
+ * userspace is unmapping already-unmapped pages, which happens quite a lot.
*/
#define tlb_remove_tlb_entry(tlb, ptep, address) \
do { \
- tlb->need_flush = 1; \
+ __tlb_adjust_range(tlb, address); \
__tlb_remove_tlb_entry(tlb, ptep, address); \
} while (0)
#define tlb_remove_pmd_tlb_entry(tlb, pmdp, address) \
do { \
- tlb->need_flush = 1; \
+ __tlb_adjust_range(tlb, address); \
__tlb_remove_pmd_tlb_entry(tlb, pmdp, address); \
} while (0)
#define pte_free_tlb(tlb, ptep, address) \
do { \
- tlb->need_flush = 1; \
+ __tlb_adjust_range(tlb, address); \
__pte_free_tlb(tlb, ptep, address); \
} while (0)
#ifndef __ARCH_HAS_4LEVEL_HACK
#define pud_free_tlb(tlb, pudp, address) \
do { \
- tlb->need_flush = 1; \
+ __tlb_adjust_range(tlb, address); \
__pud_free_tlb(tlb, pudp, address); \
} while (0)
#endif
#define pmd_free_tlb(tlb, pmdp, address) \
do { \
- tlb->need_flush = 1; \
+ __tlb_adjust_range(tlb, address); \
__pmd_free_tlb(tlb, pmdp, address); \
} while (0)
{0x1002, 0x4C64, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
{0x1002, 0x4C66, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
{0x1002, 0x4C67, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV250|RADEON_IS_MOBILITY}, \
- {0x1002, 0x4C6E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_RV280|RADEON_IS_MOBILITY}, \
{0x1002, 0x4E44, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
{0x1002, 0x4E45, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
{0x1002, 0x4E46, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_R300}, \
--- /dev/null
+/*
+ * Copyright (C) 2014 Linaro Ltd.
+ *
+ * Author: Ulf Hansson <ulf.hansson@linaro.org>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+#ifndef _DT_BINDINGS_ARM_UX500_PM_DOMAINS_H
+#define _DT_BINDINGS_ARM_UX500_PM_DOMAINS_H
+
+#define DOMAIN_VAPE 0
+
+/* Number of PM domains. */
+#define NR_DOMAINS (DOMAIN_VAPE + 1)
+
+#endif
#define IMX5_CLK_OCRAM 186
#define IMX5_CLK_SAHARA_IPG_GATE 187
#define IMX5_CLK_SATA_REF 188
-#define IMX5_CLK_END 189
+#define IMX5_CLK_STEP_SEL 189
+#define IMX5_CLK_CPU_PODF_SEL 190
+#define IMX5_CLK_ARM 191
+#define IMX5_CLK_END 192
#endif /* __DT_BINDINGS_CLOCK_IMX5_H */
#define IMX6QDL_CLK_USDHC3_SEL 50
#define IMX6QDL_CLK_USDHC4_SEL 51
#define IMX6QDL_CLK_ENFC_SEL 52
-#define IMX6QDL_CLK_EMI_SEL 53
-#define IMX6QDL_CLK_EMI_SLOW_SEL 54
+#define IMX6QDL_CLK_EIM_SEL 53
+#define IMX6QDL_CLK_EIM_SLOW_SEL 54
#define IMX6QDL_CLK_VDO_AXI_SEL 55
#define IMX6QDL_CLK_VPU_AXI_SEL 56
#define IMX6QDL_CLK_CKO1_SEL 57
#define IMX6QDL_CLK_USDHC4_PODF 94
#define IMX6QDL_CLK_ENFC_PRED 95
#define IMX6QDL_CLK_ENFC_PODF 96
-#define IMX6QDL_CLK_EMI_PODF 97
-#define IMX6QDL_CLK_EMI_SLOW_PODF 98
+#define IMX6QDL_CLK_EIM_PODF 97
+#define IMX6QDL_CLK_EIM_SLOW_PODF 98
#define IMX6QDL_CLK_VPU_AXI_PODF 99
#define IMX6QDL_CLK_CKO1_PODF 100
#define IMX6QDL_CLK_AXI 101
#define ESC1_CLK_SRC 43
#define HDMI_CLK_SRC 44
#define VSYNC_CLK_SRC 45
-#define RBCPR_CLK_SRC 46
+#define MMSS_RBCPR_CLK_SRC 46
#define RBBMTIMER_CLK_SRC 47
#define MAPLE_CLK_SRC 48
#define VDP_CLK_SRC 49
/* MSTP2 */
#define R8A7740_CLK_SCIFA6 30
+#define R8A7740_CLK_INTCA 29
#define R8A7740_CLK_SCIFA7 22
#define R8A7740_CLK_DMAC1 18
#define R8A7740_CLK_DMAC2 17
#define R8A7790_CLK_MSIOF0 0
/* MSTP1 */
-#define R8A7790_CLK_JPU 6
+#define R8A7790_CLK_VCP1 0
+#define R8A7790_CLK_VCP0 1
+#define R8A7790_CLK_VPC1 2
+#define R8A7790_CLK_VPC0 3
+#define R8A7790_CLK_JPU 6
+#define R8A7790_CLK_SSP1 9
#define R8A7790_CLK_TMU1 11
+#define R8A7790_CLK_3DG 12
+#define R8A7790_CLK_2DDMAC 15
+#define R8A7790_CLK_FDP1_2 17
+#define R8A7790_CLK_FDP1_1 18
+#define R8A7790_CLK_FDP1_0 19
#define R8A7790_CLK_TMU3 21
#define R8A7790_CLK_TMU2 22
#define R8A7790_CLK_CMT0 24
#define R8A7790_CLK_USBDMAC1 31
/* MSTP5 */
+#define R8A7790_CLK_AUDIO_DMAC1 1
+#define R8A7790_CLK_AUDIO_DMAC0 2
#define R8A7790_CLK_THERMAL 22
#define R8A7790_CLK_PWM 23
#define R8A7791_CLK_MSIOF0 0
/* MSTP1 */
-#define R8A7791_CLK_JPU 6
+#define R8A7791_CLK_VCP0 1
+#define R8A7791_CLK_VPC0 3
+#define R8A7791_CLK_JPU 6
+#define R8A7791_CLK_SSP1 9
#define R8A7791_CLK_TMU1 11
+#define R8A7791_CLK_3DG 12
+#define R8A7791_CLK_2DDMAC 15
+#define R8A7791_CLK_FDP1_1 18
+#define R8A7791_CLK_FDP1_0 19
#define R8A7791_CLK_TMU3 21
#define R8A7791_CLK_TMU2 22
#define R8A7791_CLK_CMT0 24
#define R8A7791_CLK_USBDMAC1 31
/* MSTP5 */
+#define R8A7791_CLK_AUDIO_DMAC1 1
+#define R8A7791_CLK_AUDIO_DMAC0 2
#define R8A7791_CLK_THERMAL 22
#define R8A7791_CLK_PWM 23
#define R8A7794_CLK_MSIOF0 0
/* MSTP1 */
+#define R8A7794_CLK_VCP0 1
+#define R8A7794_CLK_VPC0 3
#define R8A7794_CLK_TMU1 11
+#define R8A7794_CLK_3DG 12
+#define R8A7794_CLK_2DDMAC 15
+#define R8A7794_CLK_FDP1_0 19
#define R8A7794_CLK_TMU3 21
#define R8A7794_CLK_TMU2 22
#define R8A7794_CLK_CMT0 24
#define R8A7794_CLK_TMU0 25
+#define R8A7794_CLK_VSP1_DU0 28
+#define R8A7794_CLK_VSP1_S 31
/* MSTP2 */
#define R8A7794_CLK_SCIFA2 2
#define R8A7794_CLK_SCIF0 21
/* MSTP8 */
+#define R8A7794_CLK_VIN1 10
+#define R8A7794_CLK_VIN0 11
#define R8A7794_CLK_ETHER 13
/* MSTP9 */
--- /dev/null
+/*
+ * This header provides constants clk index STMicroelectronics
+ * STiH407 SoC.
+ */
+#ifndef _DT_BINDINGS_CLK_STIH407
+#define _DT_BINDINGS_CLK_STIH407
+
+/* CLOCKGEN C0 */
+#define CLK_ICN_GPU 0
+#define CLK_FDMA 1
+#define CLK_NAND 2
+#define CLK_HVA 3
+#define CLK_PROC_STFE 4
+#define CLK_PROC_TP 5
+#define CLK_RX_ICN_DMU 6
+#define CLK_RX_ICN_DISP_0 6
+#define CLK_RX_ICN_DISP_1 6
+#define CLK_RX_ICN_HVA 7
+#define CLK_RX_ICN_TS 7
+#define CLK_ICN_CPU 8
+#define CLK_TX_ICN_DMU 9
+#define CLK_TX_ICN_HVA 9
+#define CLK_TX_ICN_TS 9
+#define CLK_ICN_COMPO 9
+#define CLK_MMC_0 10
+#define CLK_MMC_1 11
+#define CLK_JPEGDEC 12
+#define CLK_ICN_REG 13
+#define CLK_TRACE_A9 13
+#define CLK_PTI_STM 13
+#define CLK_EXT2F_A9 13
+#define CLK_IC_BDISP_0 14
+#define CLK_IC_BDISP_1 15
+#define CLK_PP_DMU 16
+#define CLK_VID_DMU 17
+#define CLK_DSS_LPC 18
+#define CLK_ST231_AUD_0 19
+#define CLK_ST231_GP_0 19
+#define CLK_ST231_GP_1 20
+#define CLK_ST231_DMU 21
+#define CLK_ICN_LMI 22
+#define CLK_TX_ICN_DISP_0 23
+#define CLK_TX_ICN_DISP_1 23
+#define CLK_ICN_SBC 24
+#define CLK_STFE_FRC2 25
+#define CLK_ETH_PHY 26
+#define CLK_ETH_REF_PHYCLK 27
+#define CLK_FLASH_PROMIP 28
+#define CLK_MAIN_DISP 29
+#define CLK_AUX_DISP 30
+#define CLK_COMPO_DVP 31
+
+/* CLOCKGEN D0 */
+#define CLK_PCM_0 0
+#define CLK_PCM_1 1
+#define CLK_PCM_2 2
+#define CLK_SPDIFF 3
+
+/* CLOCKGEN D2 */
+#define CLK_PIX_MAIN_DISP 0
+#define CLK_PIX_PIP 1
+#define CLK_PIX_GDP1 2
+#define CLK_PIX_GDP2 3
+#define CLK_PIX_GDP3 4
+#define CLK_PIX_GDP4 5
+#define CLK_PIX_AUX_DISP 6
+#define CLK_DENC 7
+#define CLK_PIX_HDDAC 8
+#define CLK_HDDAC 9
+#define CLK_SDDAC 10
+#define CLK_PIX_DVO 11
+#define CLK_DVO 12
+#define CLK_PIX_HDMI 13
+#define CLK_TMDS_HDMI 14
+#define CLK_REF_HDMIPHY 15
+
+/* CLOCKGEN D3 */
+#define CLK_STFE_FRC1 0
+#define CLK_TSOUT_0 1
+#define CLK_TSOUT_1 2
+#define CLK_MCHI 3
+#define CLK_VSENS_COMPO 4
+#define CLK_FRC1_REMOTE 5
+#define CLK_LPC_0 6
+#define CLK_LPC_1 7
+#endif
--- /dev/null
+/*
+ * This header provides constants clk index STMicroelectronics
+ * STiH410 SoC.
+ */
+#ifndef _DT_BINDINGS_CLK_STIH410
+#define _DT_BINDINGS_CLK_STIH410
+
+#include "stih407-clks.h"
+
+/* STiH410 introduces new clock outputs compared to STiH407 */
+
+/* CLOCKGEN C0 */
+#define CLK_TX_ICN_HADES 32
+#define CLK_RX_ICN_HADES 33
+#define CLK_ICN_REG_16 34
+#define CLK_PP_HADES 35
+#define CLK_CLUST_HADES 36
+#define CLK_HWPE_HADES 37
+#define CLK_FC_HADES 38
+
+/* CLOCKGEN D0 */
+#define CLK_PCMR10_MASTER 4
+#define CLK_USB2_PHY 5
+
+#endif
#define TEGRA114_CLK_I2S0 30
/* 31 */
-/* 32 */
+#define TEGRA114_CLK_MC 32
/* 33 */
#define TEGRA114_CLK_APBDMA 34
/* 35 */
#define TEGRA124_CLK_I2S0 30
/* 31 */
-/* 32 */
+#define TEGRA124_CLK_MC 32
/* 33 */
#define TEGRA124_CLK_APBDMA 34
/* 35 */
/* 30 */
#define TEGRA20_CLK_CACHE2 31
-#define TEGRA20_CLK_MEM 32
+#define TEGRA20_CLK_MC 32
#define TEGRA20_CLK_AHBDMA 33
#define TEGRA20_CLK_APBDMA 34
/* 35 */
#define VF610_CLK_FASK_CLK_SEL 8
#define VF610_CLK_AUDIO_EXT 9
#define VF610_CLK_ENET_EXT 10
-#define VF610_CLK_PLL1_MAIN 11
+#define VF610_CLK_PLL1_SYS 11
#define VF610_CLK_PLL1_PFD1 12
#define VF610_CLK_PLL1_PFD2 13
#define VF610_CLK_PLL1_PFD3 14
#define VF610_CLK_PLL1_PFD4 15
-#define VF610_CLK_PLL2_MAIN 16
+#define VF610_CLK_PLL2_BUS 16
#define VF610_CLK_PLL2_PFD1 17
#define VF610_CLK_PLL2_PFD2 18
#define VF610_CLK_PLL2_PFD3 19
#define VF610_CLK_PLL2_PFD4 20
-#define VF610_CLK_PLL3_MAIN 21
+#define VF610_CLK_PLL3_USB_OTG 21
#define VF610_CLK_PLL3_PFD1 22
#define VF610_CLK_PLL3_PFD2 23
#define VF610_CLK_PLL3_PFD3 24
#define VF610_CLK_PLL3_PFD4 25
-#define VF610_CLK_PLL4_MAIN 26
-#define VF610_CLK_PLL5_MAIN 27
-#define VF610_CLK_PLL6_MAIN 28
+#define VF610_CLK_PLL4_AUDIO 26
+#define VF610_CLK_PLL5_ENET 27
+#define VF610_CLK_PLL6_VIDEO 28
#define VF610_CLK_PLL3_MAIN_DIV 29
#define VF610_CLK_PLL4_MAIN_DIV 30
#define VF610_CLK_PLL6_MAIN_DIV 31
#define VF610_CLK_DMAMUX3 153
#define VF610_CLK_FLEXCAN0_EN 154
#define VF610_CLK_FLEXCAN1_EN 155
-#define VF610_CLK_PLL7_MAIN 156
+#define VF610_CLK_PLL7_USB_HOST 156
#define VF610_CLK_USBPHY0 157
#define VF610_CLK_USBPHY1 158
-#define VF610_CLK_END 159
+#define VF610_CLK_LVDS1_IN 159
+#define VF610_CLK_ANACLK1 160
+#define VF610_CLK_PLL1_BYPASS_SRC 161
+#define VF610_CLK_PLL2_BYPASS_SRC 162
+#define VF610_CLK_PLL3_BYPASS_SRC 163
+#define VF610_CLK_PLL4_BYPASS_SRC 164
+#define VF610_CLK_PLL5_BYPASS_SRC 165
+#define VF610_CLK_PLL6_BYPASS_SRC 166
+#define VF610_CLK_PLL7_BYPASS_SRC 167
+#define VF610_CLK_PLL1 168
+#define VF610_CLK_PLL2 169
+#define VF610_CLK_PLL3 170
+#define VF610_CLK_PLL4 171
+#define VF610_CLK_PLL5 172
+#define VF610_CLK_PLL6 173
+#define VF610_CLK_PLL7 174
+#define VF610_PLL1_BYPASS 175
+#define VF610_PLL2_BYPASS 176
+#define VF610_PLL3_BYPASS 177
+#define VF610_PLL4_BYPASS 178
+#define VF610_PLL5_BYPASS 179
+#define VF610_PLL6_BYPASS 180
+#define VF610_PLL7_BYPASS 181
+#define VF610_CLK_END 182
#endif /* __DT_BINDINGS_CLOCK_VF610_H */
--- /dev/null
+#ifndef DT_BINDINGS_MEMORY_TEGRA114_MC_H
+#define DT_BINDINGS_MEMORY_TEGRA114_MC_H
+
+#define TEGRA_SWGROUP_PTC 0
+#define TEGRA_SWGROUP_DC 1
+#define TEGRA_SWGROUP_DCB 2
+#define TEGRA_SWGROUP_EPP 3
+#define TEGRA_SWGROUP_G2 4
+#define TEGRA_SWGROUP_AVPC 5
+#define TEGRA_SWGROUP_NV 6
+#define TEGRA_SWGROUP_HDA 7
+#define TEGRA_SWGROUP_HC 8
+#define TEGRA_SWGROUP_MSENC 9
+#define TEGRA_SWGROUP_PPCS 10
+#define TEGRA_SWGROUP_VDE 11
+#define TEGRA_SWGROUP_MPCORELP 12
+#define TEGRA_SWGROUP_MPCORE 13
+#define TEGRA_SWGROUP_VI 14
+#define TEGRA_SWGROUP_ISP 15
+#define TEGRA_SWGROUP_XUSB_HOST 16
+#define TEGRA_SWGROUP_XUSB_DEV 17
+#define TEGRA_SWGROUP_EMUCIF 18
+#define TEGRA_SWGROUP_TSEC 19
+
+#endif
--- /dev/null
+#ifndef DT_BINDINGS_MEMORY_TEGRA124_MC_H
+#define DT_BINDINGS_MEMORY_TEGRA124_MC_H
+
+#define TEGRA_SWGROUP_PTC 0
+#define TEGRA_SWGROUP_DC 1
+#define TEGRA_SWGROUP_DCB 2
+#define TEGRA_SWGROUP_AFI 3
+#define TEGRA_SWGROUP_AVPC 4
+#define TEGRA_SWGROUP_HDA 5
+#define TEGRA_SWGROUP_HC 6
+#define TEGRA_SWGROUP_MSENC 7
+#define TEGRA_SWGROUP_PPCS 8
+#define TEGRA_SWGROUP_SATA 9
+#define TEGRA_SWGROUP_VDE 10
+#define TEGRA_SWGROUP_MPCORELP 11
+#define TEGRA_SWGROUP_MPCORE 12
+#define TEGRA_SWGROUP_ISP2 13
+#define TEGRA_SWGROUP_XUSB_HOST 14
+#define TEGRA_SWGROUP_XUSB_DEV 15
+#define TEGRA_SWGROUP_ISP2B 16
+#define TEGRA_SWGROUP_TSEC 17
+#define TEGRA_SWGROUP_A9AVP 18
+#define TEGRA_SWGROUP_GPU 19
+#define TEGRA_SWGROUP_SDMMC1A 20
+#define TEGRA_SWGROUP_SDMMC2A 21
+#define TEGRA_SWGROUP_SDMMC3A 22
+#define TEGRA_SWGROUP_SDMMC4A 23
+#define TEGRA_SWGROUP_VIC 24
+#define TEGRA_SWGROUP_VI 25
+
+#endif
--- /dev/null
+#ifndef DT_BINDINGS_MEMORY_TEGRA30_MC_H
+#define DT_BINDINGS_MEMORY_TEGRA30_MC_H
+
+#define TEGRA_SWGROUP_PTC 0
+#define TEGRA_SWGROUP_DC 1
+#define TEGRA_SWGROUP_DCB 2
+#define TEGRA_SWGROUP_EPP 3
+#define TEGRA_SWGROUP_G2 4
+#define TEGRA_SWGROUP_MPE 5
+#define TEGRA_SWGROUP_VI 6
+#define TEGRA_SWGROUP_AFI 7
+#define TEGRA_SWGROUP_AVPC 8
+#define TEGRA_SWGROUP_NV 9
+#define TEGRA_SWGROUP_NV2 10
+#define TEGRA_SWGROUP_HDA 11
+#define TEGRA_SWGROUP_HC 12
+#define TEGRA_SWGROUP_PPCS 13
+#define TEGRA_SWGROUP_SATA 14
+#define TEGRA_SWGROUP_VDE 15
+#define TEGRA_SWGROUP_MPCORELP 16
+#define TEGRA_SWGROUP_MPCORE 17
+#define TEGRA_SWGROUP_ISP 18
+
+#endif
/* Active pin states */
#define PIN_OUTPUT (0 | PULL_DIS)
-#define PIN_OUTPUT_PULLUP (PIN_OUTPUT | PULL_ENA | PULL_UP)
-#define PIN_OUTPUT_PULLDOWN (PIN_OUTPUT | PULL_ENA)
+#define PIN_OUTPUT_PULLUP (PULL_UP)
+#define PIN_OUTPUT_PULLDOWN (0)
#define PIN_INPUT (INPUT_EN | PULL_DIS)
#define PIN_INPUT_SLEW (INPUT_EN | SLEWCONTROL)
#define PIN_INPUT_PULLUP (PULL_ENA | INPUT_EN | PULL_UP)
--- /dev/null
+/*
+ * Copyright (C) 2014 Google, Inc
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Device Tree binding constants for the Maxim 77802 PMIC regulators
+ */
+
+#ifndef _DT_BINDINGS_REGULATOR_MAXIM_MAX77802_H
+#define _DT_BINDINGS_REGULATOR_MAXIM_MAX77802_H
+
+/* Regulator operating modes */
+#define MAX77802_OPMODE_LP 1
+#define MAX77802_OPMODE_NORMAL 3
+
+#endif /* _DT_BINDINGS_REGULATOR_MAXIM_MAX77802_H */
--- /dev/null
+/*
+ * This header provides constants for the reset controller
+ * based peripheral powerdown requests on the STMicroelectronics
+ * STiH407 SoC.
+ */
+#ifndef _DT_BINDINGS_RESET_CONTROLLER_STIH407
+#define _DT_BINDINGS_RESET_CONTROLLER_STIH407
+
+/* Powerdown requests control 0 */
+#define STIH407_EMISS_POWERDOWN 0
+#define STIH407_NAND_POWERDOWN 1
+
+/* Synp GMAC PowerDown */
+#define STIH407_ETH1_POWERDOWN 2
+
+/* Powerdown requests control 1 */
+#define STIH407_USB3_POWERDOWN 3
+#define STIH407_USB2_PORT1_POWERDOWN 4
+#define STIH407_USB2_PORT0_POWERDOWN 5
+#define STIH407_PCIE1_POWERDOWN 6
+#define STIH407_PCIE0_POWERDOWN 7
+#define STIH407_SATA1_POWERDOWN 8
+#define STIH407_SATA0_POWERDOWN 9
+
+/* Reset defines */
+#define STIH407_ETH1_SOFTRESET 0
+#define STIH407_MMC1_SOFTRESET 1
+#define STIH407_PICOPHY_SOFTRESET 2
+#define STIH407_IRB_SOFTRESET 3
+#define STIH407_PCIE0_SOFTRESET 4
+#define STIH407_PCIE1_SOFTRESET 5
+#define STIH407_SATA0_SOFTRESET 6
+#define STIH407_SATA1_SOFTRESET 7
+#define STIH407_MIPHY0_SOFTRESET 8
+#define STIH407_MIPHY1_SOFTRESET 9
+#define STIH407_MIPHY2_SOFTRESET 10
+#define STIH407_SATA0_PWR_SOFTRESET 11
+#define STIH407_SATA1_PWR_SOFTRESET 12
+#define STIH407_DELTA_SOFTRESET 13
+#define STIH407_BLITTER_SOFTRESET 14
+#define STIH407_HDTVOUT_SOFTRESET 15
+#define STIH407_HDQVDP_SOFTRESET 16
+#define STIH407_VDP_AUX_SOFTRESET 17
+#define STIH407_COMPO_SOFTRESET 18
+#define STIH407_HDMI_TX_PHY_SOFTRESET 19
+#define STIH407_JPEG_DEC_SOFTRESET 20
+#define STIH407_VP8_DEC_SOFTRESET 21
+#define STIH407_GPU_SOFTRESET 22
+#define STIH407_HVA_SOFTRESET 23
+#define STIH407_ERAM_HVA_SOFTRESET 24
+#define STIH407_LPM_SOFTRESET 25
+#define STIH407_KEYSCAN_SOFTRESET 26
+#define STIH407_USB2_PORT0_SOFTRESET 27
+#define STIH407_USB2_PORT1_SOFTRESET 28
+
+/* Picophy reset defines */
+#define STIH407_PICOPHY0_RESET 0
+#define STIH407_PICOPHY1_RESET 1
+#define STIH407_PICOPHY2_RESET 2
+
+#endif /* _DT_BINDINGS_RESET_CONTROLLER_STIH407 */
int acpi_device_uevent_modalias(struct device *, struct kobj_uevent_env *);
int acpi_device_modalias(struct device *, char *, int);
+struct platform_device *acpi_create_platform_device(struct acpi_device *);
#define ACPI_PTR(_ptr) (_ptr)
#else /* !CONFIG_ACPI */
* @detect_pin: GPIO pin wired to the card detect switch
* @wp_pin: GPIO pin wired to the write protect sensor
* @detect_is_active_high: The state of the detect pin when it is active
+ * @non_removable: The slot is not removable, only detect once
*
* If a given slot is not present on the board, @bus_width should be
* set to 0. The other fields are ignored in this case.
int detect_pin;
int wp_pin;
bool detect_is_active_high;
+ bool non_removable;
};
/**
extern unsigned compat_chattr_class[];
extern unsigned compat_signal_class[];
-extern int __weak audit_classify_compat_syscall(int abi, unsigned syscall);
+extern int audit_classify_compat_syscall(int abi, unsigned syscall);
/* audit_names->type values */
#define AUDIT_TYPE_UNKNOWN 0 /* we don't know yet */
* position @h. For example
* GENMASK_ULL(39, 21) gives us the 64bit vector 0x000000ffffe00000.
*/
-#define GENMASK(h, l) (((U32_C(1) << ((h) - (l) + 1)) - 1) << (l))
-#define GENMASK_ULL(h, l) (((U64_C(1) << ((h) - (l) + 1)) - 1) << (l))
+#define GENMASK(h, l) \
+ (((~0UL) << (l)) & (~0UL >> (BITS_PER_LONG - 1 - (h))))
+
+#define GENMASK_ULL(h, l) \
+ (((~0ULL) << (l)) & (~0ULL >> (BITS_PER_LONG_LONG - 1 - (h))))
extern unsigned int __sw_hweight8(unsigned int w);
extern unsigned int __sw_hweight16(unsigned int w);
gfp_t gfp, bool reserved);
struct request *blk_mq_tag_to_rq(struct blk_mq_tags *tags, unsigned int tag);
+enum {
+ BLK_MQ_UNIQUE_TAG_BITS = 16,
+ BLK_MQ_UNIQUE_TAG_MASK = (1 << BLK_MQ_UNIQUE_TAG_BITS) - 1,
+};
+
+u32 blk_mq_unique_tag(struct request *rq);
+
+static inline u16 blk_mq_unique_tag_to_hwq(u32 unique_tag)
+{
+ return unique_tag >> BLK_MQ_UNIQUE_TAG_BITS;
+}
+
+static inline u16 blk_mq_unique_tag_to_tag(u32 unique_tag)
+{
+ return unique_tag & BLK_MQ_UNIQUE_TAG_MASK;
+}
+
struct blk_mq_hw_ctx *blk_mq_map_queue(struct request_queue *, const int ctx_index);
struct blk_mq_hw_ctx *blk_mq_alloc_single_hw_queue(struct blk_mq_tag_set *, unsigned int, int);
/*
* tag stuff
*/
-#define blk_rq_tagged(rq) \
- ((rq)->mq_ctx || ((rq)->cmd_flags & REQ_QUEUED))
extern int blk_queue_start_tag(struct request_queue *, struct request *);
extern struct request *blk_queue_find_tag(struct request_queue *, int);
extern void blk_queue_end_tag(struct request_queue *, struct request *);
struct request *r1,
struct request *r2)
{
- return 0;
+ return true;
}
static inline bool blk_integrity_merge_bio(struct request_queue *rq,
struct request *r,
struct bio *b)
{
- return 0;
+ return true;
}
static inline bool blk_integrity_is_initialized(struct gendisk *g)
{
extern unsigned long init_bootmem(unsigned long addr, unsigned long memend);
extern unsigned long free_all_bootmem(void);
+extern void reset_node_managed_pages(pg_data_t *pgdat);
extern void reset_all_zones_managed_pages(void);
extern void free_bootmem_node(pg_data_t *pgdat,
wait_queue_head_t *bh_waitq_head(struct buffer_head *bh);
struct buffer_head *__find_get_block(struct block_device *bdev, sector_t block,
unsigned size);
-struct buffer_head *__getblk(struct block_device *bdev, sector_t block,
- unsigned size);
+struct buffer_head *__getblk_gfp(struct block_device *bdev, sector_t block,
+ unsigned size, gfp_t gfp);
void __brelse(struct buffer_head *);
void __bforget(struct buffer_head *);
void __breadahead(struct block_device *, sector_t block, unsigned int size);
-struct buffer_head *__bread(struct block_device *, sector_t block, unsigned size);
+struct buffer_head *__bread_gfp(struct block_device *,
+ sector_t block, unsigned size, gfp_t gfp);
void invalidate_bh_lrus(void);
struct buffer_head *alloc_buffer_head(gfp_t gfp_flags);
void free_buffer_head(struct buffer_head * bh);
static inline struct buffer_head *
sb_bread(struct super_block *sb, sector_t block)
{
- return __bread(sb->s_bdev, block, sb->s_blocksize);
+ return __bread_gfp(sb->s_bdev, block, sb->s_blocksize, __GFP_MOVABLE);
+}
+
+static inline struct buffer_head *
+sb_bread_unmovable(struct super_block *sb, sector_t block)
+{
+ return __bread_gfp(sb->s_bdev, block, sb->s_blocksize, 0);
}
static inline void
static inline struct buffer_head *
sb_getblk(struct super_block *sb, sector_t block)
{
- return __getblk(sb->s_bdev, block, sb->s_blocksize);
+ return __getblk_gfp(sb->s_bdev, block, sb->s_blocksize, __GFP_MOVABLE);
}
static inline struct buffer_head *
__lock_buffer(bh);
}
+static inline struct buffer_head *getblk_unmovable(struct block_device *bdev,
+ sector_t block,
+ unsigned size)
+{
+ return __getblk_gfp(bdev, block, size, 0);
+}
+
+static inline struct buffer_head *__getblk(struct block_device *bdev,
+ sector_t block,
+ unsigned size)
+{
+ return __getblk_gfp(bdev, block, size, __GFP_MOVABLE);
+}
+
+/**
+ * __bread() - reads a specified block and returns the bh
+ * @bdev: the block_device to read from
+ * @block: number of block
+ * @size: size (in bytes) to read
+ *
+ * Reads a specified block, and returns buffer head that contains it.
+ * The page cache is allocated from movable area so that it can be migrated.
+ * It returns NULL if the block was unreadable.
+ */
+static inline struct buffer_head *
+__bread(struct block_device *bdev, sector_t block, unsigned size)
+{
+ return __bread_gfp(bdev, block, size, __GFP_MOVABLE);
+}
+
extern int __set_page_dirty_buffers(struct page *page);
#else /* CONFIG_BLOCK */
return 1;
}
+static inline bool can_is_canfd_skb(const struct sk_buff *skb)
+{
+ /* the CAN specific type of skb is identified by its data length */
+ return skb->len == CANFD_MTU;
+}
+
/* get data length from can_dlc with sanitized can_dlc */
u8 can_dlc2len(u8 can_dlc);
#define CLK_DIVIDER_READ_ONLY BIT(5)
extern const struct clk_ops clk_divider_ops;
-extern const struct clk_ops clk_divider_ro_ops;
struct clk *clk_register_divider(struct device *dev, const char *name,
const char *parent_name, unsigned long flags,
void __iomem *reg, u8 shift, u8 width,
void omap2_init_clk_hw_omap_clocks(struct clk *clk);
int omap3_noncore_dpll_enable(struct clk_hw *hw);
void omap3_noncore_dpll_disable(struct clk_hw *hw);
+int omap3_noncore_dpll_set_parent(struct clk_hw *hw, u8 index);
int omap3_noncore_dpll_set_rate(struct clk_hw *hw, unsigned long rate,
unsigned long parent_rate);
+int omap3_noncore_dpll_set_rate_and_parent(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long parent_rate,
+ u8 index);
+long omap3_noncore_dpll_determine_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long *best_parent_rate,
+ struct clk **best_parent_clk);
unsigned long omap4_dpll_regm4xen_recalc(struct clk_hw *hw,
unsigned long parent_rate);
long omap4_dpll_regm4xen_round_rate(struct clk_hw *hw,
unsigned long target_rate,
unsigned long *parent_rate);
+long omap4_dpll_regm4xen_determine_rate(struct clk_hw *hw,
+ unsigned long rate,
+ unsigned long *best_parent_rate,
+ struct clk **best_parent_clk);
u8 omap2_init_dpll_parent(struct clk_hw *hw);
unsigned long omap3_dpll_recalc(struct clk_hw *hw, unsigned long parent_rate);
long omap2_dpll_round_rate(struct clk_hw *hw, unsigned long target_rate,
void omap2_clk_enable_init_clocks(const char **clk_names, u8 num_clocks);
int omap3_dpll4_set_rate(struct clk_hw *clk, unsigned long rate,
unsigned long parent_rate);
+int omap3_dpll4_set_rate_and_parent(struct clk_hw *hw, unsigned long rate,
+ unsigned long parent_rate, u8 index);
int omap2_dflt_clk_enable(struct clk_hw *hw);
void omap2_dflt_clk_disable(struct clk_hw *hw);
int omap2_dflt_clk_is_enabled(struct clk_hw *hw);
extern void clocksource_change_rating(struct clocksource *cs, int rating);
extern void clocksource_suspend(void);
extern void clocksource_resume(void);
-extern struct clocksource * __init __weak clocksource_default_clock(void);
+extern struct clocksource * __init clocksource_default_clock(void);
extern void clocksource_mark_unstable(struct clocksource *cs);
extern u64
extern phys_addr_t cma_get_base(struct cma *cma);
extern unsigned long cma_get_size(struct cma *cma);
-extern int __init cma_declare_contiguous(phys_addr_t size,
- phys_addr_t base, phys_addr_t limit,
+extern int __init cma_declare_contiguous(phys_addr_t base,
+ phys_addr_t size, phys_addr_t limit,
phys_addr_t alignment, unsigned int order_per_bit,
bool fixed, struct cma **res_cma);
-extern int cma_init_reserved_mem(phys_addr_t size,
- phys_addr_t base, int order_per_bit,
+extern int cma_init_reserved_mem(phys_addr_t base,
+ phys_addr_t size, int order_per_bit,
struct cma **res_cma);
extern struct page *cma_alloc(struct cma *cma, int count, unsigned int align);
extern bool cma_release(struct cma *cma, struct page *pages, int count);
* http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
*
* Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
- * Fixed in GCC 4.8.2 and later versions.
*
* (asm goto is automatically volatile - the naming reflects this.)
*/
* http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
*
* Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
- * Fixed in GCC 4.8.2 and later versions.
*
* (asm goto is automatically volatile - the naming reflects this.)
*/
--- /dev/null
+/*
+ * Copyright (C) 2014 Marvell
+ * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __CPUFREQ_DT_H__
+#define __CPUFREQ_DT_H__
+
+struct cpufreq_dt_platform_data {
+ /*
+ * True when each CPU has its own clock to control its
+ * frequency, false when all CPUs are controlled by a single
+ * clock.
+ */
+ bool independent_clocks;
+};
+
+#endif /* __CPUFREQ_DT_H__ */
struct cpufreq_driver {
char name[CPUFREQ_NAME_LEN];
u8 flags;
+ void *driver_data;
/* needed by all drivers */
int (*init) (struct cpufreq_policy *policy);
int cpufreq_unregister_driver(struct cpufreq_driver *driver_data);
const char *cpufreq_get_current_driver(void);
+void *cpufreq_get_driver_data(void);
static inline void cpufreq_verify_within_limits(struct cpufreq_policy *policy,
unsigned int min, unsigned int max)
extern unsigned long long elfcorehdr_addr;
extern unsigned long long elfcorehdr_size;
-extern int __weak elfcorehdr_alloc(unsigned long long *addr,
- unsigned long long *size);
-extern void __weak elfcorehdr_free(unsigned long long addr);
-extern ssize_t __weak elfcorehdr_read(char *buf, size_t count, u64 *ppos);
-extern ssize_t __weak elfcorehdr_read_notes(char *buf, size_t count, u64 *ppos);
-extern int __weak remap_oldmem_pfn_range(struct vm_area_struct *vma,
- unsigned long from, unsigned long pfn,
- unsigned long size, pgprot_t prot);
+extern int elfcorehdr_alloc(unsigned long long *addr, unsigned long long *size);
+extern void elfcorehdr_free(unsigned long long addr);
+extern ssize_t elfcorehdr_read(char *buf, size_t count, u64 *ppos);
+extern ssize_t elfcorehdr_read_notes(char *buf, size_t count, u64 *ppos);
+extern int remap_oldmem_pfn_range(struct vm_area_struct *vma,
+ unsigned long from, unsigned long pfn,
+ unsigned long size, pgprot_t prot);
extern ssize_t copy_oldmem_page(unsigned long, char *, size_t,
unsigned long, int);
union map_info *map_context);
typedef void (*dm_presuspend_fn) (struct dm_target *ti);
+typedef void (*dm_presuspend_undo_fn) (struct dm_target *ti);
typedef void (*dm_postsuspend_fn) (struct dm_target *ti);
typedef int (*dm_preresume_fn) (struct dm_target *ti);
typedef void (*dm_resume_fn) (struct dm_target *ti);
dm_endio_fn end_io;
dm_request_endio_fn rq_end_io;
dm_presuspend_fn presuspend;
+ dm_presuspend_undo_fn presuspend_undo;
dm_postsuspend_fn postsuspend;
dm_preresume_fn preresume;
dm_resume_fn resume;
* @MEM_DDR3: DDR3 RAM
* @MEM_RDDR3: Registered DDR3 RAM
* This is a variant of the DDR3 memories.
- * @MEM_DDR4: DDR4 RAM
+ * @MEM_LRDDR3 Load-Reduced DDR3 memory.
+ * @MEM_DDR4: Unbuffered DDR4 RAM
* @MEM_RDDR4: Registered DDR4 RAM
* This is a variant of the DDR4 memories.
*/
MEM_XDR,
MEM_DDR3,
MEM_RDDR3,
+ MEM_LRDDR3,
MEM_DDR4,
MEM_RDDR4,
};
const u8 word, u16 *data);
extern void eeprom_93cx6_multiread(struct eeprom_93cx6 *eeprom,
const u8 word, __le16 *data, const u16 words);
+extern void eeprom_93cx6_readb(struct eeprom_93cx6 *eeprom,
+ const u8 byte, u8 *data);
+extern void eeprom_93cx6_multireadb(struct eeprom_93cx6 *eeprom,
+ const u8 byte, u8 *data, const u16 bytes);
extern void eeprom_93cx6_wren(struct eeprom_93cx6 *eeprom, bool enable);
#define EFI_MEMORY_WC ((u64)0x0000000000000002ULL) /* write-coalescing */
#define EFI_MEMORY_WT ((u64)0x0000000000000004ULL) /* write-through */
#define EFI_MEMORY_WB ((u64)0x0000000000000008ULL) /* write-back */
+#define EFI_MEMORY_UCE ((u64)0x0000000000000010ULL) /* uncached, exported */
#define EFI_MEMORY_WP ((u64)0x0000000000001000ULL) /* write-protect */
#define EFI_MEMORY_RP ((u64)0x0000000000002000ULL) /* read-protect */
#define EFI_MEMORY_XP ((u64)0x0000000000004000ULL) /* execute-protect */
typedef efi_status_t efi_set_variable_t (efi_char16_t *name, efi_guid_t *vendor,
u32 attr, unsigned long data_size,
void *data);
+typedef efi_status_t
+efi_set_variable_nonblocking_t(efi_char16_t *name, efi_guid_t *vendor,
+ u32 attr, unsigned long data_size, void *data);
+
typedef efi_status_t efi_get_next_high_mono_count_t (u32 *count);
typedef void efi_reset_system_t (int reset_type, efi_status_t status,
unsigned long data_size, efi_char16_t *data);
#define SMBIOS_TABLE_GUID \
EFI_GUID( 0xeb9d2d31, 0x2d88, 0x11d3, 0x9a, 0x16, 0x0, 0x90, 0x27, 0x3f, 0xc1, 0x4d )
+#define SMBIOS3_TABLE_GUID \
+ EFI_GUID( 0xf2fd1544, 0x9794, 0x4a2c, 0x99, 0x2e, 0xe5, 0xbb, 0xcf, 0x20, 0xe3, 0x94 )
+
#define SAL_SYSTEM_TABLE_GUID \
EFI_GUID( 0xeb9d2d32, 0x2d88, 0x11d3, 0x9a, 0x16, 0x0, 0x90, 0x27, 0x3f, 0xc1, 0x4d )
unsigned long mps; /* MPS table */
unsigned long acpi; /* ACPI table (IA64 ext 0.71) */
unsigned long acpi20; /* ACPI table (ACPI 2.0) */
- unsigned long smbios; /* SM BIOS table */
+ unsigned long smbios; /* SMBIOS table (32 bit entry point) */
+ unsigned long smbios3; /* SMBIOS table (64 bit entry point) */
unsigned long sal_systab; /* SAL system table */
unsigned long boot_info; /* boot info table */
unsigned long hcdp; /* HCDP table */
efi_get_variable_t *get_variable;
efi_get_next_variable_t *get_next_variable;
efi_set_variable_t *set_variable;
+ efi_set_variable_nonblocking_t *set_variable_nonblocking;
efi_query_variable_info_t *query_variable_info;
efi_update_capsule_t *update_capsule;
efi_query_capsule_caps_t *query_capsule_caps;
(md) <= (efi_memory_desc_t *)((m)->map_end - (m)->desc_size); \
(md) = (void *)(md) + (m)->desc_size)
+/*
+ * Format an EFI memory descriptor's type and attributes to a user-provided
+ * character buffer, as per snprintf(), and return the buffer.
+ */
+char * __init efi_md_typeattr_format(char *buf, size_t size,
+ const efi_memory_desc_t *md);
+
/**
* efi_range_is_wc - check the WC bit on an address range
* @start: starting kvirt address
efi_get_variable_t *get_variable;
efi_get_next_variable_t *get_next_variable;
efi_set_variable_t *set_variable;
+ efi_set_variable_nonblocking_t *set_variable_nonblocking;
efi_query_variable_store_t *query_variable_store;
};
unsigned long *load_addr,
unsigned long *load_size);
+efi_status_t efi_parse_options(char *cmdline);
+
+bool efi_runtime_disabled(void);
#endif /* _LINUX_EFI_H */
* defined in <linux/wait.h>
*/
-#define wait_event_freezekillable(wq, condition) \
-({ \
- int __retval; \
- freezer_do_not_count(); \
- __retval = wait_event_killable(wq, (condition)); \
- freezer_count(); \
- __retval; \
-})
-
/* DO NOT ADD ANY NEW CALLERS OF THIS FUNCTION */
#define wait_event_freezekillable_unsafe(wq, condition) \
({ \
__retval; \
})
-#define wait_event_freezable(wq, condition) \
-({ \
- int __retval; \
- freezer_do_not_count(); \
- __retval = wait_event_interruptible(wq, (condition)); \
- freezer_count(); \
- __retval; \
-})
-
-#define wait_event_freezable_timeout(wq, condition, timeout) \
-({ \
- long __retval = timeout; \
- freezer_do_not_count(); \
- __retval = wait_event_interruptible_timeout(wq, (condition), \
- __retval); \
- freezer_count(); \
- __retval; \
-})
-
-#define wait_event_freezable_exclusive(wq, condition) \
-({ \
- int __retval; \
- freezer_do_not_count(); \
- __retval = wait_event_interruptible_exclusive(wq, condition); \
- freezer_count(); \
- __retval; \
-})
-
-
#else /* !CONFIG_FREEZER */
static inline bool frozen(struct task_struct *p) { return false; }
static inline bool freezing(struct task_struct *p) { return false; }
#define freezable_schedule_hrtimeout_range(expires, delta, mode) \
schedule_hrtimeout_range(expires, delta, mode)
-#define wait_event_freezable(wq, condition) \
- wait_event_interruptible(wq, condition)
-
-#define wait_event_freezable_timeout(wq, condition, timeout) \
- wait_event_interruptible_timeout(wq, condition, timeout)
-
-#define wait_event_freezable_exclusive(wq, condition) \
- wait_event_interruptible_exclusive(wq, condition)
-
-#define wait_event_freezekillable(wq, condition) \
- wait_event_killable(wq, condition)
-
#define wait_event_freezekillable_unsafe(wq, condition) \
wait_event_killable(wq, condition)
#define ATTR_OPEN (1 << 15) /* Truncating from open(O_TRUNC) */
#define ATTR_TIMES_SET (1 << 16)
+/*
+ * Whiteout is represented by a char device. The following constants define the
+ * mode and device number to use.
+ */
+#define WHITEOUT_MODE 0
+#define WHITEOUT_DEV 0
+
/*
* This is the Inode Attributes structure, used for notify_change(). It
* uses the above definitions as flags, to know which values have changed.
*/
#include <linux/quota.h>
+/*
+ * Maximum number of layers of fs stack. Needs to be limited to
+ * prevent kernel stack overflow
+ */
+#define FILESYSTEM_MAX_STACK_DEPTH 2
+
/**
* enum positive_aop_returns - aop return codes with specific semantics
*
* 2: child/target
* 3: xattr
* 4: second non-directory
- * The last is for certain operations (such as rename) which lock two
+ * 5: second parent (when locking independent directories in rename)
+ *
+ * I_MUTEX_NONDIR2 is for certain operations (such as rename) which lock two
* non-directories at once.
*
* The locking order between these classes is
- * parent -> child -> normal -> xattr -> second non-directory
+ * parent[2] -> child -> grandchild -> normal -> xattr -> second non-directory
*/
enum inode_i_mutex_lock_class
{
I_MUTEX_PARENT,
I_MUTEX_CHILD,
I_MUTEX_XATTR,
- I_MUTEX_NONDIR2
+ I_MUTEX_NONDIR2,
+ I_MUTEX_PARENT2,
};
void lock_two_nondirectories(struct inode *, struct inode*);
struct list_lru s_dentry_lru ____cacheline_aligned_in_smp;
struct list_lru s_inode_lru ____cacheline_aligned_in_smp;
struct rcu_head rcu;
+
+ /*
+ * Indicates how deep in a filesystem stack this SB is
+ */
+ int s_stack_depth;
};
extern struct timespec current_fs_time(struct super_block *sb);
extern int vfs_rmdir(struct inode *, struct dentry *);
extern int vfs_unlink(struct inode *, struct dentry *, struct inode **);
extern int vfs_rename(struct inode *, struct dentry *, struct inode *, struct dentry *, struct inode **, unsigned int);
+extern int vfs_whiteout(struct inode *, struct dentry *);
/*
* VFS dentry helper functions.
umode_t create_mode, int *opened);
int (*tmpfile) (struct inode *, struct dentry *, umode_t);
int (*set_acl)(struct inode *, struct posix_acl *, int);
+
+ /* WARNING: probably going away soon, do not use! */
+ int (*dentry_open)(struct dentry *, struct file *, const struct cred *);
} ____cacheline_aligned;
ssize_t rw_copy_check_uvector(int type, const struct iovec __user * uvector,
#define IS_AUTOMOUNT(inode) ((inode)->i_flags & S_AUTOMOUNT)
#define IS_NOSEC(inode) ((inode)->i_flags & S_NOSEC)
+#define IS_WHITEOUT(inode) (S_ISCHR(inode->i_mode) && \
+ (inode)->i_rdev == WHITEOUT_DEV)
+
/*
* Inode state bits. Protected by inode->i_lock
*
extern struct file *filp_open(const char *, int, umode_t);
extern struct file *file_open_root(struct dentry *, struct vfsmount *,
const char *, int);
+extern int vfs_open(const struct path *, struct file *, const struct cred *);
extern struct file * dentry_open(const struct path *, int, const struct cred *);
extern int filp_close(struct file *, fl_owner_t id);
#endif
extern int notify_change(struct dentry *, struct iattr *, struct inode **);
extern int inode_permission(struct inode *, int);
+extern int __inode_permission(struct inode *, int);
extern int generic_permission(struct inode *, int);
+extern int __check_sticky(struct inode *dir, struct inode *inode);
static inline bool execute_ok(struct inode *inode)
{
extern ssize_t new_sync_write(struct file *filp, const char __user *buf, size_t len, loff_t *ppos);
/* fs/block_dev.c */
+extern ssize_t blkdev_read_iter(struct kiocb *iocb, struct iov_iter *to);
extern ssize_t blkdev_write_iter(struct kiocb *iocb, struct iov_iter *from);
extern int blkdev_fsync(struct file *filp, loff_t start, loff_t end,
int datasync);
struct file *, loff_t *, size_t, unsigned int);
extern ssize_t generic_splice_sendpage(struct pipe_inode_info *pipe,
struct file *out, loff_t *, size_t len, unsigned int flags);
+extern long do_splice_direct(struct file *in, loff_t *ppos, struct file *out,
+ loff_t *opos, size_t len, unsigned int flags);
+
extern void
file_ra_state_init(struct file_ra_state *ra, struct address_space *mapping);
return (mode & S_ISUID) || ((mode & S_ISGID) && (mode & S_IXGRP));
}
+static inline int check_sticky(struct inode *dir, struct inode *inode)
+{
+ if (!(dir->i_mode & S_ISVTX))
+ return 0;
+
+ return __check_sticky(dir, inode);
+}
+
static inline void inode_has_no_xattr(struct inode *inode)
{
if (!is_sxid(inode->i_mode) && (inode->i_sb->s_flags & MS_NOSEC))
struct pmbus_platform_data {
u32 flags; /* Device specific flags */
+
+ /* regulator support */
+ int num_regulators;
+ struct regulator_init_data *reg_init_data;
};
#endif /* _PMBUS_H_ */
#define IIO_EVENT_CODE_EXTRACT_TYPE(mask) ((mask >> 56) & 0xFF)
-#define IIO_EVENT_CODE_EXTRACT_DIR(mask) ((mask >> 48) & 0xCF)
+#define IIO_EVENT_CODE_EXTRACT_DIR(mask) ((mask >> 48) & 0x7F)
#define IIO_EVENT_CODE_EXTRACT_CHAN_TYPE(mask) ((mask >> 32) & 0xFF)
static __inline__ __be32 inet_make_mask(int logmask)
{
if (logmask)
- return htonl(~((1<<(32-logmask))-1));
+ return htonl(~((1U<<(32-logmask))-1));
return 0;
}
#define INIT_IDS
#endif
-#ifdef CONFIG_TREE_PREEMPT_RCU
+#ifdef CONFIG_PREEMPT_RCU
#define INIT_TASK_RCU_TREE_PREEMPT() \
.rcu_blocked_node = NULL,
#else
# define INIT_RT_MUTEXES(tsk)
#endif
+#ifdef CONFIG_NUMA_BALANCING
+# define INIT_NUMA_BALANCING(tsk) \
+ .numa_preferred_nid = -1, \
+ .numa_group = NULL, \
+ .numa_faults = NULL,
+#else
+# define INIT_NUMA_BALANCING(tsk)
+#endif
+
/*
* INIT_TASK is used to set up the first task table, touch at
* your own risk!. Base=0, limit=0x1fffff (=2MB)
INIT_CPUSET_SEQ(tsk) \
INIT_RT_MUTEXES(tsk) \
INIT_VTIME(tsk) \
+ INIT_NUMA_BALANCING(tsk) \
}
#include <linux/errno.h>
#include <linux/err.h>
#include <linux/types.h>
+#include <linux/scatterlist.h>
#include <trace/events/iommu.h>
#define IOMMU_READ (1 << 0)
* @detach_dev: detach device from an iommu domain
* @map: map a physically contiguous memory region to an iommu domain
* @unmap: unmap a physically contiguous memory region from an iommu domain
+ * @map_sg: map a scatter-gather list of physically contiguous memory chunks
+ * to an iommu domain
* @iova_to_phys: translate iova to physical address
* @add_device: add device to iommu grouping
* @remove_device: remove device from iommu grouping
phys_addr_t paddr, size_t size, int prot);
size_t (*unmap)(struct iommu_domain *domain, unsigned long iova,
size_t size);
+ size_t (*map_sg)(struct iommu_domain *domain, unsigned long iova,
+ struct scatterlist *sg, unsigned int nents, int prot);
phys_addr_t (*iova_to_phys)(struct iommu_domain *domain, dma_addr_t iova);
int (*add_device)(struct device *dev);
void (*remove_device)(struct device *dev);
phys_addr_t paddr, size_t size, int prot);
extern size_t iommu_unmap(struct iommu_domain *domain, unsigned long iova,
size_t size);
+extern size_t default_iommu_map_sg(struct iommu_domain *domain, unsigned long iova,
+ struct scatterlist *sg,unsigned int nents,
+ int prot);
extern phys_addr_t iommu_iova_to_phys(struct iommu_domain *domain, dma_addr_t iova);
extern void iommu_set_fault_handler(struct iommu_domain *domain,
iommu_fault_handler_t handler, void *token);
return ret;
}
+static inline size_t iommu_map_sg(struct iommu_domain *domain,
+ unsigned long iova, struct scatterlist *sg,
+ unsigned int nents, int prot)
+{
+ return domain->ops->map_sg(domain, iova, sg, nents, prot);
+}
+
#else /* CONFIG_IOMMU_API */
struct iommu_ops {};
return -ENODEV;
}
+static inline size_t iommu_map_sg(struct iommu_domain *domain,
+ unsigned long iova, struct scatterlist *sg,
+ unsigned int nents, int prot)
+{
+ return -ENODEV;
+}
+
static inline int iommu_domain_window_enable(struct iommu_domain *domain,
u32 wnd_nr, phys_addr_t paddr,
u64 size, int prot)
extern void jbd2_journal_commit_transaction(journal_t *);
/* Checkpoint list management */
-int __jbd2_journal_clean_checkpoint_list(journal_t *journal);
+void __jbd2_journal_clean_checkpoint_list(journal_t *journal);
int __jbd2_journal_remove_checkpoint(struct journal_head *);
void __jbd2_journal_insert_checkpoint(struct journal_head *, transaction_t *);
#endif
#ifdef CONFIG_DEBUG_ATOMIC_SLEEP
+ void ___might_sleep(const char *file, int line, int preempt_offset);
void __might_sleep(const char *file, int line, int preempt_offset);
/**
* might_sleep - annotation for functions that can sleep
*/
# define might_sleep() \
do { __might_sleep(__FILE__, __LINE__, 0); might_resched(); } while (0)
+# define sched_annotate_sleep() __set_current_state(TASK_RUNNING)
#else
+ static inline void ___might_sleep(const char *file, int line,
+ int preempt_offset) { }
static inline void __might_sleep(const char *file, int line,
int preempt_offset) { }
# define might_sleep() do { might_resched(); } while (0)
+# define sched_annotate_sleep() do { } while (0)
#endif
#define might_sleep_if(cond) do { if (cond) might_sleep(); } while (0)
extern int get_option(char **str, int *pint);
extern char *get_options(const char *str, int nints, int *ints);
extern unsigned long long memparse(const char *ptr, char **retptr);
+extern bool parse_option_str(const char *str, const char *option);
extern int core_kernel_text(unsigned long addr);
extern int core_kernel_data(unsigned long addr);
return kstat_cpu(cpu).irqs_sum;
}
-/*
- * Lock/unlock the current runqueue - to extract task statistics:
- */
-extern unsigned long long task_delta_exec(struct task_struct *);
-
extern void account_user_time(struct task_struct *, cputime_t, cputime_t);
extern void account_system_time(struct task_struct *, int, cputime_t, cputime_t);
extern void account_steal_time(cputime_t);
extern struct kgdb_arch arch_kgdb_ops;
-extern unsigned long __weak kgdb_arch_pc(int exception, struct pt_regs *regs);
+extern unsigned long kgdb_arch_pc(int exception, struct pt_regs *regs);
#ifdef CONFIG_SERIAL_KGDB_NMI
extern int kgdb_register_nmi_console(void);
#ifdef CONFIG_TRANSPARENT_HUGEPAGE
extern int __khugepaged_enter(struct mm_struct *mm);
extern void __khugepaged_exit(struct mm_struct *mm);
-extern int khugepaged_enter_vma_merge(struct vm_area_struct *vma);
+extern int khugepaged_enter_vma_merge(struct vm_area_struct *vma,
+ unsigned long vm_flags);
#define khugepaged_enabled() \
(transparent_hugepage_flags & \
__khugepaged_exit(mm);
}
-static inline int khugepaged_enter(struct vm_area_struct *vma)
+static inline int khugepaged_enter(struct vm_area_struct *vma,
+ unsigned long vm_flags)
{
if (!test_bit(MMF_VM_HUGEPAGE, &vma->vm_mm->flags))
if ((khugepaged_always() ||
- (khugepaged_req_madv() &&
- vma->vm_flags & VM_HUGEPAGE)) &&
- !(vma->vm_flags & VM_NOHUGEPAGE))
+ (khugepaged_req_madv() && (vm_flags & VM_HUGEPAGE))) &&
+ !(vm_flags & VM_NOHUGEPAGE))
if (__khugepaged_enter(vma->vm_mm))
return -ENOMEM;
return 0;
static inline void khugepaged_exit(struct mm_struct *mm)
{
}
-static inline int khugepaged_enter(struct vm_area_struct *vma)
+static inline int khugepaged_enter(struct vm_area_struct *vma,
+ unsigned long vm_flags)
{
return 0;
}
-static inline int khugepaged_enter_vma_merge(struct vm_area_struct *vma)
+static inline int khugepaged_enter_vma_merge(struct vm_area_struct *vma,
+ unsigned long vm_flags)
{
return 0;
}
int kvm_cpu_has_pending_timer(struct kvm_vcpu *vcpu);
void kvm_vcpu_kick(struct kvm_vcpu *vcpu);
-bool kvm_is_mmio_pfn(pfn_t pfn);
+bool kvm_is_reserved_pfn(pfn_t pfn);
struct kvm_irq_ack_notifier {
struct hlist_node link;
void kvm_device_put(struct kvm_device *dev);
struct kvm_device *kvm_device_from_filp(struct file *filp);
int kvm_register_device_ops(struct kvm_device_ops *ops, u32 type);
+void kvm_unregister_device_ops(u32 type);
extern struct kvm_device_ops kvm_mpic_ops;
extern struct kvm_device_ops kvm_xics_ops;
#define __LINUX_LEDS_H_INCLUDED
#include <linux/list.h>
-#include <linux/spinlock.h>
#include <linux/rwsem.h>
+#include <linux/spinlock.h>
#include <linux/timer.h>
#include <linux/workqueue.h>
struct led_classdev {
const char *name;
- int brightness;
- int max_brightness;
+ enum led_brightness brightness;
+ enum led_brightness max_brightness;
int flags;
/* Lower 16 bits reflect status */
*/
extern void led_set_brightness(struct led_classdev *led_cdev,
enum led_brightness brightness);
+/**
+ * led_update_brightness - update LED brightness
+ * @led_cdev: the LED to query
+ *
+ * Get an LED's current brightness and update led_cdev->brightness
+ * member with the obtained value.
+ *
+ * Returns: 0 on success or negative error value on failure
+ */
+extern int led_update_brightness(struct led_classdev *led_cdev);
/*
* LED Triggers
extern int ata_scsi_slave_config(struct scsi_device *sdev);
extern void ata_scsi_slave_destroy(struct scsi_device *sdev);
extern int ata_scsi_change_queue_depth(struct scsi_device *sdev,
- int queue_depth, int reason);
+ int queue_depth);
extern int __ata_change_queue_depth(struct ata_port *ap, struct scsi_device *sdev,
- int queue_depth, int reason);
+ int queue_depth);
extern struct ata_device *ata_dev_pair(struct ata_device *adev);
extern int ata_do_set_mode(struct ata_link *link, struct ata_device **r_failed_dev);
extern void ata_scsi_port_error_handler(struct Scsi_Host *host, struct ata_port *ap);
+++ /dev/null
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License along with
- * this program. If not, see <http://www.gnu.org/licenses/>.
- */
-
-int pl320_ipc_transmit(u32 *data);
-int pl320_ipc_register_notifier(struct notifier_block *nb);
-int pl320_ipc_unregister_notifier(struct notifier_block *nb);
--- /dev/null
+/*
+ * Copyright (C) 2013-2014 Linaro Ltd.
+ * Author: Jassi Brar <jassisinghbrar@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MAILBOX_CLIENT_H
+#define __MAILBOX_CLIENT_H
+
+#include <linux/of.h>
+#include <linux/device.h>
+
+struct mbox_chan;
+
+/**
+ * struct mbox_client - User of a mailbox
+ * @dev: The client device
+ * @tx_block: If the mbox_send_message should block until data is
+ * transmitted.
+ * @tx_tout: Max block period in ms before TX is assumed failure
+ * @knows_txdone: If the client could run the TX state machine. Usually
+ * if the client receives some ACK packet for transmission.
+ * Unused if the controller already has TX_Done/RTR IRQ.
+ * @rx_callback: Atomic callback to provide client the data received
+ * @tx_done: Atomic callback to tell client of data transmission
+ */
+struct mbox_client {
+ struct device *dev;
+ bool tx_block;
+ unsigned long tx_tout;
+ bool knows_txdone;
+
+ void (*rx_callback)(struct mbox_client *cl, void *mssg);
+ void (*tx_done)(struct mbox_client *cl, void *mssg, int r);
+};
+
+struct mbox_chan *mbox_request_channel(struct mbox_client *cl, int index);
+int mbox_send_message(struct mbox_chan *chan, void *mssg);
+void mbox_client_txdone(struct mbox_chan *chan, int r); /* atomic */
+bool mbox_client_peek_data(struct mbox_chan *chan); /* atomic */
+void mbox_free_channel(struct mbox_chan *chan); /* may sleep */
+
+#endif /* __MAILBOX_CLIENT_H */
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __MAILBOX_CONTROLLER_H
+#define __MAILBOX_CONTROLLER_H
+
+#include <linux/of.h>
+#include <linux/types.h>
+#include <linux/timer.h>
+#include <linux/device.h>
+#include <linux/completion.h>
+
+struct mbox_chan;
+
+/**
+ * struct mbox_chan_ops - methods to control mailbox channels
+ * @send_data: The API asks the MBOX controller driver, in atomic
+ * context try to transmit a message on the bus. Returns 0 if
+ * data is accepted for transmission, -EBUSY while rejecting
+ * if the remote hasn't yet read the last data sent. Actual
+ * transmission of data is reported by the controller via
+ * mbox_chan_txdone (if it has some TX ACK irq). It must not
+ * sleep.
+ * @startup: Called when a client requests the chan. The controller
+ * could ask clients for additional parameters of communication
+ * to be provided via client's chan_data. This call may
+ * block. After this call the Controller must forward any
+ * data received on the chan by calling mbox_chan_received_data.
+ * The controller may do stuff that need to sleep.
+ * @shutdown: Called when a client relinquishes control of a chan.
+ * This call may block too. The controller must not forward
+ * any received data anymore.
+ * The controller may do stuff that need to sleep.
+ * @last_tx_done: If the controller sets 'txdone_poll', the API calls
+ * this to poll status of last TX. The controller must
+ * give priority to IRQ method over polling and never
+ * set both txdone_poll and txdone_irq. Only in polling
+ * mode 'send_data' is expected to return -EBUSY.
+ * The controller may do stuff that need to sleep/block.
+ * Used only if txdone_poll:=true && txdone_irq:=false
+ * @peek_data: Atomic check for any received data. Return true if controller
+ * has some data to push to the client. False otherwise.
+ */
+struct mbox_chan_ops {
+ int (*send_data)(struct mbox_chan *chan, void *data);
+ int (*startup)(struct mbox_chan *chan);
+ void (*shutdown)(struct mbox_chan *chan);
+ bool (*last_tx_done)(struct mbox_chan *chan);
+ bool (*peek_data)(struct mbox_chan *chan);
+};
+
+/**
+ * struct mbox_controller - Controller of a class of communication channels
+ * @dev: Device backing this controller
+ * @ops: Operators that work on each communication chan
+ * @chans: Array of channels
+ * @num_chans: Number of channels in the 'chans' array.
+ * @txdone_irq: Indicates if the controller can report to API when
+ * the last transmitted data was read by the remote.
+ * Eg, if it has some TX ACK irq.
+ * @txdone_poll: If the controller can read but not report the TX
+ * done. Ex, some register shows the TX status but
+ * no interrupt rises. Ignored if 'txdone_irq' is set.
+ * @txpoll_period: If 'txdone_poll' is in effect, the API polls for
+ * last TX's status after these many millisecs
+ * @of_xlate: Controller driver specific mapping of channel via DT
+ * @poll: API private. Used to poll for TXDONE on all channels.
+ * @node: API private. To hook into list of controllers.
+ */
+struct mbox_controller {
+ struct device *dev;
+ struct mbox_chan_ops *ops;
+ struct mbox_chan *chans;
+ int num_chans;
+ bool txdone_irq;
+ bool txdone_poll;
+ unsigned txpoll_period;
+ struct mbox_chan *(*of_xlate)(struct mbox_controller *mbox,
+ const struct of_phandle_args *sp);
+ /* Internal to API */
+ struct timer_list poll;
+ struct list_head node;
+};
+
+/*
+ * The length of circular buffer for queuing messages from a client.
+ * 'msg_count' tracks the number of buffered messages while 'msg_free'
+ * is the index where the next message would be buffered.
+ * We shouldn't need it too big because every transfer is interrupt
+ * triggered and if we have lots of data to transfer, the interrupt
+ * latencies are going to be the bottleneck, not the buffer length.
+ * Besides, mbox_send_message could be called from atomic context and
+ * the client could also queue another message from the notifier 'tx_done'
+ * of the last transfer done.
+ * REVISIT: If too many platforms see the "Try increasing MBOX_TX_QUEUE_LEN"
+ * print, it needs to be taken from config option or somesuch.
+ */
+#define MBOX_TX_QUEUE_LEN 20
+
+/**
+ * struct mbox_chan - s/w representation of a communication chan
+ * @mbox: Pointer to the parent/provider of this channel
+ * @txdone_method: Way to detect TXDone chosen by the API
+ * @cl: Pointer to the current owner of this channel
+ * @tx_complete: Transmission completion
+ * @active_req: Currently active request hook
+ * @msg_count: No. of mssg currently queued
+ * @msg_free: Index of next available mssg slot
+ * @msg_data: Hook for data packet
+ * @lock: Serialise access to the channel
+ * @con_priv: Hook for controller driver to attach private data
+ */
+struct mbox_chan {
+ struct mbox_controller *mbox;
+ unsigned txdone_method;
+ struct mbox_client *cl;
+ struct completion tx_complete;
+ void *active_req;
+ unsigned msg_count, msg_free;
+ void *msg_data[MBOX_TX_QUEUE_LEN];
+ spinlock_t lock; /* Serialise access to the channel */
+ void *con_priv;
+};
+
+int mbox_controller_register(struct mbox_controller *mbox); /* can sleep */
+void mbox_controller_unregister(struct mbox_controller *mbox); /* can sleep */
+void mbox_chan_received_data(struct mbox_chan *chan, void *data); /* atomic */
+void mbox_chan_txdone(struct mbox_chan *chan, int r); /* atomic */
+
+#endif /* __MAILBOX_CONTROLLER_H */
}
#endif
+int mvebu_mbus_save_cpu_target(u32 *store_addr);
void mvebu_mbus_get_pcie_mem_aperture(struct resource *res);
void mvebu_mbus_get_pcie_io_aperture(struct resource *res);
int mvebu_mbus_add_window_remap_by_id(unsigned int target,
return false;
}
-void __mem_cgroup_begin_update_page_stat(struct page *page, bool *locked,
- unsigned long *flags);
-
-extern atomic_t memcg_moving;
-
-static inline void mem_cgroup_begin_update_page_stat(struct page *page,
- bool *locked, unsigned long *flags)
-{
- if (mem_cgroup_disabled())
- return;
- rcu_read_lock();
- *locked = false;
- if (atomic_read(&memcg_moving))
- __mem_cgroup_begin_update_page_stat(page, locked, flags);
-}
-
-void __mem_cgroup_end_update_page_stat(struct page *page,
- unsigned long *flags);
-static inline void mem_cgroup_end_update_page_stat(struct page *page,
- bool *locked, unsigned long *flags)
-{
- if (mem_cgroup_disabled())
- return;
- if (*locked)
- __mem_cgroup_end_update_page_stat(page, flags);
- rcu_read_unlock();
-}
-
-void mem_cgroup_update_page_stat(struct page *page,
- enum mem_cgroup_stat_index idx,
- int val);
-
-static inline void mem_cgroup_inc_page_stat(struct page *page,
+struct mem_cgroup *mem_cgroup_begin_page_stat(struct page *page, bool *locked,
+ unsigned long *flags);
+void mem_cgroup_end_page_stat(struct mem_cgroup *memcg, bool locked,
+ unsigned long flags);
+void mem_cgroup_update_page_stat(struct mem_cgroup *memcg,
+ enum mem_cgroup_stat_index idx, int val);
+
+static inline void mem_cgroup_inc_page_stat(struct mem_cgroup *memcg,
enum mem_cgroup_stat_index idx)
{
- mem_cgroup_update_page_stat(page, idx, 1);
+ mem_cgroup_update_page_stat(memcg, idx, 1);
}
-static inline void mem_cgroup_dec_page_stat(struct page *page,
+static inline void mem_cgroup_dec_page_stat(struct mem_cgroup *memcg,
enum mem_cgroup_stat_index idx)
{
- mem_cgroup_update_page_stat(page, idx, -1);
+ mem_cgroup_update_page_stat(memcg, idx, -1);
}
unsigned long mem_cgroup_soft_limit_reclaim(struct zone *zone, int order,
{
}
-static inline void mem_cgroup_begin_update_page_stat(struct page *page,
+static inline struct mem_cgroup *mem_cgroup_begin_page_stat(struct page *page,
bool *locked, unsigned long *flags)
{
+ return NULL;
}
-static inline void mem_cgroup_end_update_page_stat(struct page *page,
- bool *locked, unsigned long *flags)
+static inline void mem_cgroup_end_page_stat(struct mem_cgroup *memcg,
+ bool locked, unsigned long flags)
{
}
return false;
}
-static inline void mem_cgroup_inc_page_stat(struct page *page,
+static inline void mem_cgroup_inc_page_stat(struct mem_cgroup *memcg,
enum mem_cgroup_stat_index idx)
{
}
-static inline void mem_cgroup_dec_page_stat(struct page *page,
+static inline void mem_cgroup_dec_page_stat(struct mem_cgroup *memcg,
enum mem_cgroup_stat_index idx)
{
}
};
int arch_get_memory_phys_device(unsigned long start_pfn);
-unsigned long __weak memory_block_size_bytes(void);
+unsigned long memory_block_size_bytes(void);
/* These states are exposed to userspace as text strings in sysfs */
#define MEM_ONLINE (1<<0) /* exposed to userspace */
int ab8500_sysctrl_read(u16 reg, u8 *value);
int ab8500_sysctrl_write(u16 reg, u8 mask, u8 value);
-void ab8500_restart(char mode, const char *cmd);
#else
#define ARIZONA_MIC_BIAS_CTRL_1 0x218
#define ARIZONA_MIC_BIAS_CTRL_2 0x219
#define ARIZONA_MIC_BIAS_CTRL_3 0x21A
+#define ARIZONA_HP_CTRL_1L 0x225
+#define ARIZONA_HP_CTRL_1R 0x226
#define ARIZONA_ACCESSORY_DETECT_MODE_1 0x293
#define ARIZONA_HEADPHONE_DETECT_1 0x29B
#define ARIZONA_HEADPHONE_DETECT_2 0x29C
#define ARIZONA_AIF2_FRAME_CTRL_2 0x548
#define ARIZONA_AIF2_FRAME_CTRL_3 0x549
#define ARIZONA_AIF2_FRAME_CTRL_4 0x54A
+#define ARIZONA_AIF2_FRAME_CTRL_5 0x54B
+#define ARIZONA_AIF2_FRAME_CTRL_6 0x54C
+#define ARIZONA_AIF2_FRAME_CTRL_7 0x54D
+#define ARIZONA_AIF2_FRAME_CTRL_8 0x54E
#define ARIZONA_AIF2_FRAME_CTRL_11 0x551
#define ARIZONA_AIF2_FRAME_CTRL_12 0x552
+#define ARIZONA_AIF2_FRAME_CTRL_13 0x553
+#define ARIZONA_AIF2_FRAME_CTRL_14 0x554
+#define ARIZONA_AIF2_FRAME_CTRL_15 0x555
+#define ARIZONA_AIF2_FRAME_CTRL_16 0x556
#define ARIZONA_AIF2_TX_ENABLES 0x559
#define ARIZONA_AIF2_RX_ENABLES 0x55A
#define ARIZONA_AIF2_FORCE_WRITE 0x55B
#define ARIZONA_MICB3_ENA_SHIFT 0 /* MICB3_ENA */
#define ARIZONA_MICB3_ENA_WIDTH 1 /* MICB3_ENA */
+/*
+ * R549 (0x225) - HP Ctrl 1L
+ */
+#define ARIZONA_RMV_SHRT_HP1L 0x4000 /* RMV_SHRT_HP1L */
+#define ARIZONA_RMV_SHRT_HP1L_MASK 0x4000 /* RMV_SHRT_HP1L */
+#define ARIZONA_RMV_SHRT_HP1L_SHIFT 14 /* RMV_SHRT_HP1L */
+#define ARIZONA_RMV_SHRT_HP1L_WIDTH 1 /* RMV_SHRT_HP1L */
+#define ARIZONA_HP1L_FLWR 0x0004 /* HP1L_FLWR */
+#define ARIZONA_HP1L_FLWR_MASK 0x0004 /* HP1L_FLWR */
+#define ARIZONA_HP1L_FLWR_SHIFT 2 /* HP1L_FLWR */
+#define ARIZONA_HP1L_FLWR_WIDTH 1 /* HP1L_FLWR */
+#define ARIZONA_HP1L_SHRTI 0x0002 /* HP1L_SHRTI */
+#define ARIZONA_HP1L_SHRTI_MASK 0x0002 /* HP1L_SHRTI */
+#define ARIZONA_HP1L_SHRTI_SHIFT 1 /* HP1L_SHRTI */
+#define ARIZONA_HP1L_SHRTI_WIDTH 1 /* HP1L_SHRTI */
+#define ARIZONA_HP1L_SHRTO 0x0001 /* HP1L_SHRTO */
+#define ARIZONA_HP1L_SHRTO_MASK 0x0001 /* HP1L_SHRTO */
+#define ARIZONA_HP1L_SHRTO_SHIFT 0 /* HP1L_SHRTO */
+#define ARIZONA_HP1L_SHRTO_WIDTH 1 /* HP1L_SHRTO */
+
+/*
+ * R550 (0x226) - HP Ctrl 1R
+ */
+#define ARIZONA_RMV_SHRT_HP1R 0x4000 /* RMV_SHRT_HP1R */
+#define ARIZONA_RMV_SHRT_HP1R_MASK 0x4000 /* RMV_SHRT_HP1R */
+#define ARIZONA_RMV_SHRT_HP1R_SHIFT 14 /* RMV_SHRT_HP1R */
+#define ARIZONA_RMV_SHRT_HP1R_WIDTH 1 /* RMV_SHRT_HP1R */
+#define ARIZONA_HP1R_FLWR 0x0004 /* HP1R_FLWR */
+#define ARIZONA_HP1R_FLWR_MASK 0x0004 /* HP1R_FLWR */
+#define ARIZONA_HP1R_FLWR_SHIFT 2 /* HP1R_FLWR */
+#define ARIZONA_HP1R_FLWR_WIDTH 1 /* HP1R_FLWR */
+#define ARIZONA_HP1R_SHRTI 0x0002 /* HP1R_SHRTI */
+#define ARIZONA_HP1R_SHRTI_MASK 0x0002 /* HP1R_SHRTI */
+#define ARIZONA_HP1R_SHRTI_SHIFT 1 /* HP1R_SHRTI */
+#define ARIZONA_HP1R_SHRTI_WIDTH 1 /* HP1R_SHRTI */
+#define ARIZONA_HP1R_SHRTO 0x0001 /* HP1R_SHRTO */
+#define ARIZONA_HP1R_SHRTO_MASK 0x0001 /* HP1R_SHRTO */
+#define ARIZONA_HP1R_SHRTO_SHIFT 0 /* HP1R_SHRTO */
+#define ARIZONA_HP1R_SHRTO_WIDTH 1 /* HP1R_SHRTO */
+
/*
* R659 (0x293) - Accessory Detect Mode 1
*/
--- /dev/null
+/*
+ * Copyright (C) 2014 Free Electrons
+ * Copyright (C) 2014 Atmel
+ *
+ * Author: Boris BREZILLON <boris.brezillon@free-electrons.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published by
+ * the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef __LINUX_MFD_HLCDC_H
+#define __LINUX_MFD_HLCDC_H
+
+#include <linux/clk.h>
+#include <linux/regmap.h>
+
+#define ATMEL_HLCDC_CFG(i) ((i) * 0x4)
+#define ATMEL_HLCDC_SIG_CFG LCDCFG(5)
+#define ATMEL_HLCDC_HSPOL BIT(0)
+#define ATMEL_HLCDC_VSPOL BIT(1)
+#define ATMEL_HLCDC_VSPDLYS BIT(2)
+#define ATMEL_HLCDC_VSPDLYE BIT(3)
+#define ATMEL_HLCDC_DISPPOL BIT(4)
+#define ATMEL_HLCDC_DITHER BIT(6)
+#define ATMEL_HLCDC_DISPDLY BIT(7)
+#define ATMEL_HLCDC_MODE_MASK GENMASK(9, 8)
+#define ATMEL_HLCDC_PP BIT(10)
+#define ATMEL_HLCDC_VSPSU BIT(12)
+#define ATMEL_HLCDC_VSPHO BIT(13)
+#define ATMEL_HLCDC_GUARDTIME_MASK GENMASK(20, 16)
+
+#define ATMEL_HLCDC_EN 0x20
+#define ATMEL_HLCDC_DIS 0x24
+#define ATMEL_HLCDC_SR 0x28
+#define ATMEL_HLCDC_IER 0x2c
+#define ATMEL_HLCDC_IDR 0x30
+#define ATMEL_HLCDC_IMR 0x34
+#define ATMEL_HLCDC_ISR 0x38
+
+#define ATMEL_HLCDC_CLKPOL BIT(0)
+#define ATMEL_HLCDC_CLKSEL BIT(2)
+#define ATMEL_HLCDC_CLKPWMSEL BIT(3)
+#define ATMEL_HLCDC_CGDIS(i) BIT(8 + (i))
+#define ATMEL_HLCDC_CLKDIV_SHFT 16
+#define ATMEL_HLCDC_CLKDIV_MASK GENMASK(23, 16)
+#define ATMEL_HLCDC_CLKDIV(div) ((div - 2) << ATMEL_HLCDC_CLKDIV_SHFT)
+
+#define ATMEL_HLCDC_PIXEL_CLK BIT(0)
+#define ATMEL_HLCDC_SYNC BIT(1)
+#define ATMEL_HLCDC_DISP BIT(2)
+#define ATMEL_HLCDC_PWM BIT(3)
+#define ATMEL_HLCDC_SIP BIT(4)
+
+#define ATMEL_HLCDC_SOF BIT(0)
+#define ATMEL_HLCDC_SYNCDIS BIT(1)
+#define ATMEL_HLCDC_FIFOERR BIT(4)
+#define ATMEL_HLCDC_LAYER_STATUS(x) BIT((x) + 8)
+
+/**
+ * Structure shared by the MFD device and its subdevices.
+ *
+ * @regmap: register map used to access HLCDC IP registers
+ * @periph_clk: the hlcdc peripheral clock
+ * @sys_clk: the hlcdc system clock
+ * @slow_clk: the system slow clk
+ * @irq: the hlcdc irq
+ */
+struct atmel_hlcdc {
+ struct regmap *regmap;
+ struct clk *periph_clk;
+ struct clk *sys_clk;
+ struct clk *slow_clk;
+ int irq;
+};
+
+#endif /* __LINUX_MFD_HLCDC_H */
enum {
AXP202_ID = 0,
AXP209_ID,
+ AXP288_ID,
+ NR_AXP20X_VARIANTS,
};
#define AXP20X_DATACACHE(m) (0x04 + (m))
#define AXP20X_IRQ3_EN 0x42
#define AXP20X_IRQ4_EN 0x43
#define AXP20X_IRQ5_EN 0x44
+#define AXP20X_IRQ6_EN 0x45
#define AXP20X_IRQ1_STATE 0x48
#define AXP20X_IRQ2_STATE 0x49
#define AXP20X_IRQ3_STATE 0x4a
#define AXP20X_IRQ4_STATE 0x4b
#define AXP20X_IRQ5_STATE 0x4c
+#define AXP20X_IRQ6_STATE 0x4d
/* ADC */
#define AXP20X_ACIN_V_ADC_H 0x56
#define AXP20X_CC_CTRL 0xb8
#define AXP20X_FG_RES 0xb9
+/* AXP288 specific registers */
+#define AXP288_PMIC_ADC_H 0x56
+#define AXP288_PMIC_ADC_L 0x57
+#define AXP288_ADC_TS_PIN_CTRL 0x84
+
+#define AXP288_PMIC_ADC_EN 0x84
+#define AXP288_FG_TUNE5 0xed
+
+
/* Regulators IDs */
enum {
AXP20X_LDO1 = 0,
AXP20X_IRQ_GPIO0_INPUT,
};
+enum axp288_irqs {
+ AXP288_IRQ_VBUS_FALL = 2,
+ AXP288_IRQ_VBUS_RISE,
+ AXP288_IRQ_OV,
+ AXP288_IRQ_FALLING_ALT,
+ AXP288_IRQ_RISING_ALT,
+ AXP288_IRQ_OV_ALT,
+ AXP288_IRQ_DONE = 10,
+ AXP288_IRQ_CHARGING,
+ AXP288_IRQ_SAFE_QUIT,
+ AXP288_IRQ_SAFE_ENTER,
+ AXP288_IRQ_ABSENT,
+ AXP288_IRQ_APPEND,
+ AXP288_IRQ_QWBTU,
+ AXP288_IRQ_WBTU,
+ AXP288_IRQ_QWBTO,
+ AXP288_IRQ_WBTO,
+ AXP288_IRQ_QCBTU,
+ AXP288_IRQ_CBTU,
+ AXP288_IRQ_QCBTO,
+ AXP288_IRQ_CBTO,
+ AXP288_IRQ_WL2,
+ AXP288_IRQ_WL1,
+ AXP288_IRQ_GPADC,
+ AXP288_IRQ_OT = 31,
+ AXP288_IRQ_GPIO0,
+ AXP288_IRQ_GPIO1,
+ AXP288_IRQ_POKO,
+ AXP288_IRQ_POKL,
+ AXP288_IRQ_POKS,
+ AXP288_IRQ_POKN,
+ AXP288_IRQ_POKP,
+ AXP288_IRQ_TIMER,
+ AXP288_IRQ_MV_CHNG,
+ AXP288_IRQ_BC_USB_CHNG,
+};
+
+#define AXP288_TS_ADC_H 0x58
+#define AXP288_TS_ADC_L 0x59
+#define AXP288_GP_ADC_H 0x5a
+#define AXP288_GP_ADC_L 0x5b
+
struct axp20x_dev {
struct device *dev;
struct i2c_client *i2c_client;
struct regmap *regmap;
struct regmap_irq_chip_data *regmap_irqc;
long variant;
+ int nr_cells;
+ struct mfd_cell *cells;
+ const struct regmap_config *regmap_cfg;
+ const struct regmap_irq_chip *regmap_irq_chip;
};
#endif /* __LINUX_MFD_AXP20X_H */
struct resource *mem_base,
int irq_base, struct irq_domain *irq_domain);
+static inline int mfd_add_hotplug_devices(struct device *parent,
+ const struct mfd_cell *cells, int n_devs)
+{
+ return mfd_add_devices(parent, PLATFORM_DEVID_AUTO, cells, n_devs,
+ NULL, 0, NULL);
+}
+
extern void mfd_remove_devices(struct device *parent);
#endif
--- /dev/null
+#ifndef __LINUX_USB_DLN2_H
+#define __LINUX_USB_DLN2_H
+
+#define DLN2_CMD(cmd, id) ((cmd) | ((id) << 8))
+
+struct dln2_platform_data {
+ u16 handle; /* sub-driver handle (internally used only) */
+ u8 port; /* I2C/SPI port */
+};
+
+/**
+ * dln2_event_cb_t - event callback function signature
+ *
+ * @pdev - the sub-device that registered this callback
+ * @echo - the echo header field received in the message
+ * @data - the data payload
+ * @len - the data payload length
+ *
+ * The callback function is called in interrupt context and the data payload is
+ * only valid during the call. If the user needs later access of the data, it
+ * must copy it.
+ */
+
+typedef void (*dln2_event_cb_t)(struct platform_device *pdev, u16 echo,
+ const void *data, int len);
+
+/**
+ * dl2n_register_event_cb - register a callback function for an event
+ *
+ * @pdev - the sub-device that registers the callback
+ * @event - the event for which to register a callback
+ * @event_cb - the callback function
+ *
+ * @return 0 in case of success, negative value in case of error
+ */
+int dln2_register_event_cb(struct platform_device *pdev, u16 event,
+ dln2_event_cb_t event_cb);
+
+/**
+ * dln2_unregister_event_cb - unregister the callback function for an event
+ *
+ * @pdev - the sub-device that registered the callback
+ * @event - the event for which to register a callback
+ */
+void dln2_unregister_event_cb(struct platform_device *pdev, u16 event);
+
+/**
+ * dln2_transfer - issue a DLN2 command and wait for a response and the
+ * associated data
+ *
+ * @pdev - the sub-device which is issuing this transfer
+ * @cmd - the command to be sent to the device
+ * @obuf - the buffer to be sent to the device; it can be NULL if the user
+ * doesn't need to transmit data with this command
+ * @obuf_len - the size of the buffer to be sent to the device
+ * @ibuf - any data associated with the response will be copied here; it can be
+ * NULL if the user doesn't need the response data
+ * @ibuf_len - must be initialized to the input buffer size; it will be modified
+ * to indicate the actual data transferred;
+ *
+ * @return 0 for success, negative value for errors
+ */
+int dln2_transfer(struct platform_device *pdev, u16 cmd,
+ const void *obuf, unsigned obuf_len,
+ void *ibuf, unsigned *ibuf_len);
+
+/**
+ * dln2_transfer_rx - variant of @dln2_transfer() where TX buffer is not needed
+ *
+ * @pdev - the sub-device which is issuing this transfer
+ * @cmd - the command to be sent to the device
+ * @ibuf - any data associated with the response will be copied here; it can be
+ * NULL if the user doesn't need the response data
+ * @ibuf_len - must be initialized to the input buffer size; it will be modified
+ * to indicate the actual data transferred;
+ *
+ * @return 0 for success, negative value for errors
+ */
+
+static inline int dln2_transfer_rx(struct platform_device *pdev, u16 cmd,
+ void *ibuf, unsigned *ibuf_len)
+{
+ return dln2_transfer(pdev, cmd, NULL, 0, ibuf, ibuf_len);
+}
+
+/**
+ * dln2_transfer_tx - variant of @dln2_transfer() where RX buffer is not needed
+ *
+ * @pdev - the sub-device which is issuing this transfer
+ * @cmd - the command to be sent to the device
+ * @obuf - the buffer to be sent to the device; it can be NULL if the
+ * user doesn't need to transmit data with this command
+ * @obuf_len - the size of the buffer to be sent to the device
+ *
+ * @return 0 for success, negative value for errors
+ */
+static inline int dln2_transfer_tx(struct platform_device *pdev, u16 cmd,
+ const void *obuf, unsigned obuf_len)
+{
+ return dln2_transfer(pdev, cmd, obuf, obuf_len, NULL, NULL);
+}
+
+#endif
MAX77686_OPMODE_STANDBY,
};
-enum max77802_opmode {
- MAX77802_OPMODE_OFF,
- MAX77802_OPMODE_STANDBY,
- MAX77802_OPMODE_LP,
- MAX77802_OPMODE_NORMAL,
-};
-
struct max77686_opmode_data {
int id;
int mode;
#include <linux/i2c.h>
-#define MAX77693_NUM_IRQ_MUIC_REGS 3
#define MAX77693_REG_INVALID (0xff)
/* Slave addr = 0xCC: PMIC, Charger, Flash LED */
MAX77693_IRQ_GROUP_NR,
};
+#define SRC_IRQ_CHARGER BIT(0)
+#define SRC_IRQ_TOP BIT(1)
+#define SRC_IRQ_FLASH BIT(2)
+#define SRC_IRQ_MUIC BIT(3)
+#define SRC_IRQ_ALL (SRC_IRQ_CHARGER | SRC_IRQ_TOP \
+ | SRC_IRQ_FLASH | SRC_IRQ_MUIC)
+
#define LED_IRQ_FLED2_OPEN BIT(0)
#define LED_IRQ_FLED2_SHORT BIT(1)
#define LED_IRQ_FLED1_OPEN BIT(2)
#define SD_SAMPLE_POINT_CTL 0xFDA7
#define SD_PUSH_POINT_CTL 0xFDA8
#define SD_CMD0 0xFDA9
+#define SD_CMD_START 0x40
#define SD_CMD1 0xFDAA
#define SD_CMD2 0xFDAB
#define SD_CMD3 0xFDAC
#define PM_CTRL1 0xFF44
#define PM_CTRL2 0xFF45
#define PM_CTRL3 0xFF46
+#define SDIO_SEND_PME_EN 0x80
+#define FORCE_RC_MODE_ON 0x40
+#define FORCE_RX50_LINK_ON 0x20
+#define D3_DELINK_MODE_EN 0x10
+#define USE_PESRTB_CTL_DELINK 0x08
+#define DELAY_PIN_WAKE 0x04
+#define RESET_PIN_WAKE 0x02
+#define PM_WAKE_EN 0x01
#define PM_CTRL4 0xFF47
/* Memory mapping */
#define PHY_DUM_REG 0x1F
#define LCTLR 0x80
+#define LCTLR_EXT_SYNC 0x80
+#define LCTLR_COMMON_CLOCK_CFG 0x40
+#define LCTLR_RETRAIN_LINK 0x20
+#define LCTLR_LINK_DISABLE 0x10
+#define LCTLR_RCB 0x08
+#define LCTLR_RESERVED 0x04
+#define LCTLR_ASPM_CTL_MASK 0x03
+
#define PCR_SETTING_REG1 0x724
#define PCR_SETTING_REG2 0x814
#define PCR_SETTING_REG3 0x747
return (u8 *)(pcr->host_cmds_ptr);
}
+static inline int rtsx_pci_update_cfg_byte(struct rtsx_pcr *pcr, int addr,
+ u8 mask, u8 append)
+{
+ int err;
+ u8 val;
+
+ err = pci_read_config_byte(pcr->pci, addr, &val);
+ if (err < 0)
+ return err;
+ return pci_write_config_byte(pcr->pci, addr, (val & mask) | append);
+}
+
+static inline void rtsx_pci_write_be32(struct rtsx_pcr *pcr, u16 reg, u32 val)
+{
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg, 0xFF, val >> 24);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 1, 0xFF, val >> 16);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 2, 0xFF, val >> 8);
+ rtsx_pci_add_cmd(pcr, WRITE_REG_CMD, reg + 3, 0xFF, val);
+}
+
#endif
#define MIN_800_MV 800000
#define MIN_750_MV 750000
#define MIN_600_MV 600000
+#define MIN_500_MV 500000
/* Macros to represent steps for LDO/BUCK */
#define STEP_50_MV 50000
S5M8767X,
S2MPA01,
S2MPS11X,
+ S2MPS13X,
S2MPS14X,
S2MPU02,
};
--- /dev/null
+/*
+ * s2mps13.h
+ *
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd
+ * http://www.samsung.com
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef __LINUX_MFD_S2MPS13_H
+#define __LINUX_MFD_S2MPS13_H
+
+/* S2MPS13 registers */
+enum s2mps13_reg {
+ S2MPS13_REG_ID,
+ S2MPS13_REG_INT1,
+ S2MPS13_REG_INT2,
+ S2MPS13_REG_INT3,
+ S2MPS13_REG_INT1M,
+ S2MPS13_REG_INT2M,
+ S2MPS13_REG_INT3M,
+ S2MPS13_REG_ST1,
+ S2MPS13_REG_ST2,
+ S2MPS13_REG_PWRONSRC,
+ S2MPS13_REG_OFFSRC,
+ S2MPS13_REG_BU_CHG,
+ S2MPS13_REG_RTCCTRL,
+ S2MPS13_REG_CTRL1,
+ S2MPS13_REG_CTRL2,
+ S2MPS13_REG_RSVD1,
+ S2MPS13_REG_RSVD2,
+ S2MPS13_REG_RSVD3,
+ S2MPS13_REG_RSVD4,
+ S2MPS13_REG_RSVD5,
+ S2MPS13_REG_RSVD6,
+ S2MPS13_REG_CTRL3,
+ S2MPS13_REG_RSVD7,
+ S2MPS13_REG_RSVD8,
+ S2MPS13_REG_WRSTBI,
+ S2MPS13_REG_B1CTRL,
+ S2MPS13_REG_B1OUT,
+ S2MPS13_REG_B2CTRL,
+ S2MPS13_REG_B2OUT,
+ S2MPS13_REG_B3CTRL,
+ S2MPS13_REG_B3OUT,
+ S2MPS13_REG_B4CTRL,
+ S2MPS13_REG_B4OUT,
+ S2MPS13_REG_B5CTRL,
+ S2MPS13_REG_B5OUT,
+ S2MPS13_REG_B6CTRL,
+ S2MPS13_REG_B6OUT,
+ S2MPS13_REG_B7CTRL,
+ S2MPS13_REG_B7OUT,
+ S2MPS13_REG_B8CTRL,
+ S2MPS13_REG_B8OUT,
+ S2MPS13_REG_B9CTRL,
+ S2MPS13_REG_B9OUT,
+ S2MPS13_REG_B10CTRL,
+ S2MPS13_REG_B10OUT,
+ S2MPS13_REG_BB1CTRL,
+ S2MPS13_REG_BB1OUT,
+ S2MPS13_REG_BUCK_RAMP1,
+ S2MPS13_REG_BUCK_RAMP2,
+ S2MPS13_REG_LDO_DVS1,
+ S2MPS13_REG_LDO_DVS2,
+ S2MPS13_REG_LDO_DVS3,
+ S2MPS13_REG_B6OUT2,
+ S2MPS13_REG_L1CTRL,
+ S2MPS13_REG_L2CTRL,
+ S2MPS13_REG_L3CTRL,
+ S2MPS13_REG_L4CTRL,
+ S2MPS13_REG_L5CTRL,
+ S2MPS13_REG_L6CTRL,
+ S2MPS13_REG_L7CTRL,
+ S2MPS13_REG_L8CTRL,
+ S2MPS13_REG_L9CTRL,
+ S2MPS13_REG_L10CTRL,
+ S2MPS13_REG_L11CTRL,
+ S2MPS13_REG_L12CTRL,
+ S2MPS13_REG_L13CTRL,
+ S2MPS13_REG_L14CTRL,
+ S2MPS13_REG_L15CTRL,
+ S2MPS13_REG_L16CTRL,
+ S2MPS13_REG_L17CTRL,
+ S2MPS13_REG_L18CTRL,
+ S2MPS13_REG_L19CTRL,
+ S2MPS13_REG_L20CTRL,
+ S2MPS13_REG_L21CTRL,
+ S2MPS13_REG_L22CTRL,
+ S2MPS13_REG_L23CTRL,
+ S2MPS13_REG_L24CTRL,
+ S2MPS13_REG_L25CTRL,
+ S2MPS13_REG_L26CTRL,
+ S2MPS13_REG_L27CTRL,
+ S2MPS13_REG_L28CTRL,
+ S2MPS13_REG_L30CTRL,
+ S2MPS13_REG_L31CTRL,
+ S2MPS13_REG_L32CTRL,
+ S2MPS13_REG_L33CTRL,
+ S2MPS13_REG_L34CTRL,
+ S2MPS13_REG_L35CTRL,
+ S2MPS13_REG_L36CTRL,
+ S2MPS13_REG_L37CTRL,
+ S2MPS13_REG_L38CTRL,
+ S2MPS13_REG_L39CTRL,
+ S2MPS13_REG_L40CTRL,
+ S2MPS13_REG_LDODSCH1,
+ S2MPS13_REG_LDODSCH2,
+ S2MPS13_REG_LDODSCH3,
+ S2MPS13_REG_LDODSCH4,
+ S2MPS13_REG_LDODSCH5,
+};
+
+/* regulator ids */
+enum s2mps13_regulators {
+ S2MPS13_LDO1,
+ S2MPS13_LDO2,
+ S2MPS13_LDO3,
+ S2MPS13_LDO4,
+ S2MPS13_LDO5,
+ S2MPS13_LDO6,
+ S2MPS13_LDO7,
+ S2MPS13_LDO8,
+ S2MPS13_LDO9,
+ S2MPS13_LDO10,
+ S2MPS13_LDO11,
+ S2MPS13_LDO12,
+ S2MPS13_LDO13,
+ S2MPS13_LDO14,
+ S2MPS13_LDO15,
+ S2MPS13_LDO16,
+ S2MPS13_LDO17,
+ S2MPS13_LDO18,
+ S2MPS13_LDO19,
+ S2MPS13_LDO20,
+ S2MPS13_LDO21,
+ S2MPS13_LDO22,
+ S2MPS13_LDO23,
+ S2MPS13_LDO24,
+ S2MPS13_LDO25,
+ S2MPS13_LDO26,
+ S2MPS13_LDO27,
+ S2MPS13_LDO28,
+ S2MPS13_LDO29,
+ S2MPS13_LDO30,
+ S2MPS13_LDO31,
+ S2MPS13_LDO32,
+ S2MPS13_LDO33,
+ S2MPS13_LDO34,
+ S2MPS13_LDO35,
+ S2MPS13_LDO36,
+ S2MPS13_LDO37,
+ S2MPS13_LDO38,
+ S2MPS13_LDO39,
+ S2MPS13_LDO40,
+ S2MPS13_BUCK1,
+ S2MPS13_BUCK2,
+ S2MPS13_BUCK3,
+ S2MPS13_BUCK4,
+ S2MPS13_BUCK5,
+ S2MPS13_BUCK6,
+ S2MPS13_BUCK7,
+ S2MPS13_BUCK8,
+ S2MPS13_BUCK9,
+ S2MPS13_BUCK10,
+
+ S2MPS13_REGULATOR_MAX,
+};
+
+/*
+ * Default ramp delay in uv/us. Datasheet says that ramp delay can be
+ * controlled however it does not specify which register is used for that.
+ * Let's assume that default value will be set.
+ */
+#define S2MPS13_BUCK_RAMP_DELAY 12500
+
+#endif /* __LINUX_MFD_S2MPS13_H */
#define IMX6SL_GPR1_FEC_CLOCK_MUX1_SEL_MASK (0x3 << 17)
#define IMX6SL_GPR1_FEC_CLOCK_MUX2_SEL_MASK (0x1 << 14)
+/* For imx6sx iomux gpr register field define */
+#define IMX6SX_GPR1_VDEC_SW_RST_MASK (0x1 << 20)
+#define IMX6SX_GPR1_VDEC_SW_RST_RESET (0x1 << 20)
+#define IMX6SX_GPR1_VDEC_SW_RST_RELEASE (0x0 << 20)
+#define IMX6SX_GPR1_VADC_SW_RST_MASK (0x1 << 19)
+#define IMX6SX_GPR1_VADC_SW_RST_RESET (0x1 << 19)
+#define IMX6SX_GPR1_VADC_SW_RST_RELEASE (0x0 << 19)
+#define IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_MASK (0x3 << 13)
+#define IMX6SX_GPR1_FEC_CLOCK_PAD_DIR_MASK (0x3 << 17)
+#define IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_EXT (0x3 << 13)
+
+#define IMX6SX_GPR4_FEC_ENET1_STOP_REQ (0x1 << 3)
+#define IMX6SX_GPR4_FEC_ENET2_STOP_REQ (0x1 << 4)
+
+#define IMX6SX_GPR5_DISP_MUX_LDB_CTRL_MASK (0x1 << 3)
+#define IMX6SX_GPR5_DISP_MUX_LDB_CTRL_LCDIF1 (0x0 << 3)
+#define IMX6SX_GPR5_DISP_MUX_LDB_CTRL_LCDIF2 (0x1 << 3)
+
+#define IMX6SX_GPR5_CSI2_MUX_CTRL_MASK (0x3 << 27)
+#define IMX6SX_GPR5_CSI2_MUX_CTRL_EXT_PIN (0x0 << 27)
+#define IMX6SX_GPR5_CSI2_MUX_CTRL_CVD (0x1 << 27)
+#define IMX6SX_GPR5_CSI2_MUX_CTRL_VDAC_TO_CSI (0x2 << 27)
+#define IMX6SX_GPR5_CSI2_MUX_CTRL_GND (0x3 << 27)
+#define IMX6SX_GPR5_VADC_TO_CSI_CAPTURE_EN_MASK (0x1 << 26)
+#define IMX6SX_GPR5_VADC_TO_CSI_CAPTURE_EN_ENABLE (0x1 << 26)
+#define IMX6SX_GPR5_VADC_TO_CSI_CAPTURE_EN_DISABLE (0x0 << 26)
+#define IMX6SX_GPR5_CSI1_MUX_CTRL_MASK (0x3 << 4)
+#define IMX6SX_GPR5_CSI1_MUX_CTRL_EXT_PIN (0x0 << 4)
+#define IMX6SX_GPR5_CSI1_MUX_CTRL_CVD (0x1 << 4)
+#define IMX6SX_GPR5_CSI1_MUX_CTRL_VDAC_TO_CSI (0x2 << 4)
+#define IMX6SX_GPR5_CSI1_MUX_CTRL_GND (0x3 << 4)
+
+#define IMX6SX_GPR5_DISP_MUX_DCIC2_LCDIF2 (0x0 << 2)
+#define IMX6SX_GPR5_DISP_MUX_DCIC2_LVDS (0x1 << 2)
+#define IMX6SX_GPR5_DISP_MUX_DCIC2_MASK (0x1 << 2)
+#define IMX6SX_GPR5_DISP_MUX_DCIC1_LCDIF1 (0x0 << 1)
+#define IMX6SX_GPR5_DISP_MUX_DCIC1_LVDS (0x1 << 1)
+#define IMX6SX_GPR5_DISP_MUX_DCIC1_MASK (0x1 << 1)
+
#endif /* __LINUX_IMX6Q_IOMUXC_GPR_H */
/**
* struct tc3589x_gpio_platform_data - TC3589x GPIO platform data
- * @gpio_base: first gpio number assigned to TC3589x. A maximum of
- * %TC3589x_NR_GPIOS GPIOs will be allocated.
* @setup: callback for board-specific initialization
* @remove: callback for board-specific teardown
*/
struct tc3589x_gpio_platform_data {
- int gpio_base;
void (*setup)(struct tc3589x *tc3589x, unsigned gpio_base);
void (*remove)(struct tc3589x *tc3589x, unsigned gpio_base);
};
/**
* struct tc3589x_platform_data - TC3589x platform data
* @block: bitmask of blocks to enable (use TC3589x_BLOCK_*)
- * @irq_base: base IRQ number. %TC3589x_NR_IRQS irqs will be used.
* @gpio: GPIO-specific platform data
* @keypad: keypad-specific platform data
*/
struct tc3589x_platform_data {
unsigned int block;
- int irq_base;
struct tc3589x_gpio_platform_data *gpio;
const struct tc3589x_keypad_platform_data *keypad;
};
-#define TC3589x_NR_GPIOS 24
-#define TC3589x_NR_IRQS TC3589x_INT_GPIO(TC3589x_NR_GPIOS)
-
#endif
extern void truncate_pagecache(struct inode *inode, loff_t new);
extern void truncate_setsize(struct inode *inode, loff_t newsize);
+void pagecache_isize_extended(struct inode *inode, loff_t from, loff_t to);
void truncate_pagecache_range(struct inode *inode, loff_t offset, loff_t end);
int truncate_inode_page(struct address_space *mapping, struct page *page);
int generic_error_remove_page(struct address_space *mapping, struct page *page);
int redirty_page_for_writepage(struct writeback_control *wbc,
struct page *page);
void account_page_dirtied(struct page *page, struct address_space *mapping);
-void account_page_writeback(struct page *page);
int set_page_dirty(struct page *page);
int set_page_dirty_lock(struct page *page);
int clear_page_dirty_for_io(struct page *page);
unsigned int data_tag_unit_size; /* DATA TAG UNIT size */
unsigned int boot_ro_lock; /* ro lock support */
bool boot_ro_lockable;
+ bool ffu_capable; /* Firmware upgrade support */
+#define MMC_FIRMWARE_LEN 8
+ u8 fwrev[MMC_FIRMWARE_LEN]; /* FW version */
u8 raw_exception_status; /* 54 */
u8 raw_partition_support; /* 160 */
u8 raw_rpmb_size_mult; /* 168 */
#define mmc_dev_to_card(d) container_of(d, struct mmc_card, dev)
-#define mmc_list_to_card(l) container_of(l, struct mmc_card, node)
-#define mmc_get_drvdata(c) dev_get_drvdata(&(c)->dev)
-#define mmc_set_drvdata(c,d) dev_set_drvdata(&(c)->dev, d)
-
-/*
- * MMC device driver (e.g., Flash card, I/O card...)
- */
-struct mmc_driver {
- struct device_driver drv;
- int (*probe)(struct mmc_card *);
- void (*remove)(struct mmc_card *);
- int (*suspend)(struct mmc_card *);
- int (*resume)(struct mmc_card *);
- void (*shutdown)(struct mmc_card *);
-};
-
-extern int mmc_register_driver(struct mmc_driver *);
-extern void mmc_unregister_driver(struct mmc_driver *);
+extern int mmc_register_driver(struct device_driver *);
+extern void mmc_unregister_driver(struct device_driver *);
extern void mmc_fixup_device(struct mmc_card *card,
const struct mmc_fixup *table);
extern int __mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int, bool,
bool, bool);
extern int mmc_switch(struct mmc_card *, u8, u8, u8, unsigned int);
-extern int mmc_send_ext_csd(struct mmc_card *card, u8 *ext_csd);
+extern int mmc_send_tuning(struct mmc_host *host);
+extern int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd);
#define MMC_ERASE_ARG 0x00000000
#define MMC_SECURE_ERASE_ARG 0x80000000
* transfer is in progress.
* @use_dma: Whether DMA channel is initialized or not.
* @using_dma: Whether DMA is in use for the current transfer.
+ * @dma_64bit_address: Whether DMA supports 64-bit address mode or not.
* @sg_dma: Bus address of DMA buffer.
* @sg_cpu: Virtual address of DMA buffer.
* @dma_ops: Pointer to platform-specific DMA callbacks.
* @quirks: Set of quirks that apply to specific versions of the IP.
* @irq_flags: The flags to be passed to request_irq.
* @irq: The irq value to be passed to request_irq.
+ * @sdio_id0: Number of slot0 in the SDIO interrupt registers.
*
* Locking
* =======
struct mmc_command stop_abort;
unsigned int prev_blksz;
unsigned char timing;
- struct workqueue_struct *card_workqueue;
/* DMA interface members*/
int use_dma;
int using_dma;
+ int dma_64bit_address;
dma_addr_t sg_dma;
void *sg_cpu;
u32 stop_cmdr;
u32 dir_status;
struct tasklet_struct tasklet;
- struct work_struct card_work;
unsigned long pending_events;
unsigned long completed_events;
enum dw_mci_state state;
bool vqmmc_enabled;
unsigned long irq_flags; /* IRQ flags */
int irq;
+
+ int sdio_id0;
};
/* DMA ops for Internal/External DMAC interface */
#define MMC_CAP2_HS400_1_2V (1 << 16) /* Can support HS400 1.2V */
#define MMC_CAP2_HS400 (MMC_CAP2_HS400_1_8V | \
MMC_CAP2_HS400_1_2V)
+#define MMC_CAP2_HSX00_1_2V (MMC_CAP2_HS200_1_2V_SDR | MMC_CAP2_HS400_1_2V)
#define MMC_CAP2_SDIO_IRQ_NOTHREAD (1 << 17)
mmc_pm_flag_t pm_caps; /* supported pm features */
#define EXT_CSD_SANITIZE_START 165 /* W */
#define EXT_CSD_WR_REL_PARAM 166 /* RO */
#define EXT_CSD_RPMB_MULT 168 /* RO */
+#define EXT_CSD_FW_CONFIG 169 /* R/W */
#define EXT_CSD_BOOT_WP 173 /* R/W */
#define EXT_CSD_ERASE_GROUP_DEF 175 /* R/W */
#define EXT_CSD_PART_CONFIG 179 /* R/W */
#define EXT_CSD_GENERIC_CMD6_TIME 248 /* RO */
#define EXT_CSD_CACHE_SIZE 249 /* RO, 4 bytes */
#define EXT_CSD_PWR_CL_DDR_200_360 253 /* RO */
+#define EXT_CSD_FIRMWARE_VERSION 254 /* RO, 8 bytes */
+#define EXT_CSD_SUPPORTED_MODE 493 /* RO */
#define EXT_CSD_TAG_UNIT_SIZE 498 /* RO */
#define EXT_CSD_DATA_TAG_SUPPORT 499 /* RO */
#define EXT_CSD_MAX_PACKED_WRITES 500 /* RO */
#define SDHCI_QUIRK2_BROKEN_DDR50 (1<<7)
/* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */
#define SDHCI_QUIRK2_STOP_WITH_TC (1<<8)
+/* Controller does not support 64-bit DMA */
+#define SDHCI_QUIRK2_BROKEN_64_BIT_DMA (1<<9)
+/* need clear transfer mode register before send cmd */
+#define SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD (1<<10)
+/* Capability register bit-63 indicates HS400 support */
+#define SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 (1<<11)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */
#define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */
#define SDHCI_SDR104_NEEDS_TUNING (1<<10) /* SDR104/HS200 needs tuning */
#define SDHCI_USING_RETUNING_TIMER (1<<11) /* Host is using a retuning timer for the card */
+#define SDHCI_USE_64_BIT_DMA (1<<12) /* Use 64-bit DMA */
unsigned int version; /* SDHCI spec. version */
int sg_count; /* Mapped sg entries */
- u8 *adma_desc; /* ADMA descriptor table */
- u8 *align_buffer; /* Bounce buffer */
+ void *adma_table; /* ADMA descriptor table */
+ void *align_buffer; /* Bounce buffer */
+
+ size_t adma_table_sz; /* ADMA descriptor table size */
+ size_t align_buffer_sz; /* Bounce buffer size */
dma_addr_t adma_addr; /* Mapped ADMA descr. table */
dma_addr_t align_addr; /* Mapped bounce buffer */
+ unsigned int desc_sz; /* ADMA descriptor size */
+ unsigned int align_sz; /* ADMA alignment */
+ unsigned int align_mask; /* ADMA alignment mask */
+
struct tasklet_struct finish_tasklet; /* Tasklet structures */
struct timer_list timer; /* Timer for timeouts */
struct device_driver drv;
};
-#define to_sdio_driver(d) container_of(d, struct sdio_driver, drv)
-
/**
* SDIO_DEVICE - macro used to describe a specific SDIO device
* @vend: the 16 bit manufacturer code
*/
int nr_migrate_reserve_block;
+#ifdef CONFIG_MEMORY_ISOLATION
+ /*
+ * Number of isolated pageblock. It is used to solve incorrect
+ * freepage counting problem due to racy retrieving migratetype
+ * of pageblock. Protected by zone->lock.
+ */
+ unsigned long nr_isolate_pageblock;
+#endif
+
#ifdef CONFIG_MEMORY_HOTPLUG
/* see spanned/present_pages for more description */
seqlock_t span_seqlock;
extern struct vfsmount *mnt_clone_internal(struct path *path);
extern int __mnt_is_readonly(struct vfsmount *mnt);
+struct path;
+extern struct vfsmount *clone_private_mount(struct path *path);
+
struct file_system_type;
extern struct vfsmount *vfs_kern_mount(struct file_system_type *type,
int flags, const char *name,
/**
* spi_nor_scan() - scan the SPI NOR
* @nor: the spi_nor structure
- * @id: the spi_device_id provided by the driver
+ * @name: the chip type name
* @mode: the read mode supported by the driver
*
* The drivers can use this fuction to scan the SPI NOR.
* In the scanning, it will try to get all the necessary information to
* fill the mtd_info{} and the spi_nor{}.
*
- * The board may assigns a spi_device_id with @id which be used to compared with
- * the spi_device_id detected by the scanning.
+ * The chip type name can be provided through the @name parameter.
*
* Return: 0 for success, others for failure.
*/
-int spi_nor_scan(struct spi_nor *nor, const struct spi_device_id *id,
- enum read_mode mode);
-extern const struct spi_device_id spi_nor_ids[];
-
-/**
- * spi_nor_match_id() - find the spi_device_id by the name
- * @name: the name of the spi_device_id
- *
- * The drivers use this function to find the spi_device_id
- * specified by the @name.
- *
- * Return: returns the right spi_device_id pointer on success,
- * and returns NULL on failure.
- */
-const struct spi_device_id *spi_nor_match_id(char *name);
+int spi_nor_scan(struct spi_nor *nor, const char *name, enum read_mode mode);
#endif
unsigned int status;
};
+static inline void
+nfs_free_pnfs_ds_cinfo(struct pnfs_ds_commit_info *cinfo)
+{
+ kfree(cinfo->buckets);
+}
+
#else
struct pnfs_ds_commit_info {
};
+static inline void
+nfs_free_pnfs_ds_cinfo(struct pnfs_ds_commit_info *cinfo)
+{
+}
+
#endif /* CONFIG_NFS_V4_1 */
#ifdef CONFIG_NFS_V4_2
extern int of_property_read_string(struct device_node *np,
const char *propname,
const char **out_string);
-extern int of_property_read_string_index(struct device_node *np,
- const char *propname,
- int index, const char **output);
extern int of_property_match_string(struct device_node *np,
const char *propname,
const char *string);
-extern int of_property_count_strings(struct device_node *np,
- const char *propname);
+extern int of_property_read_string_helper(struct device_node *np,
+ const char *propname,
+ const char **out_strs, size_t sz, int index);
extern int of_device_is_compatible(const struct device_node *device,
const char *);
extern int of_device_is_available(const struct device_node *device);
return -ENOSYS;
}
-static inline int of_property_read_string_index(struct device_node *np,
- const char *propname, int index,
- const char **out_string)
-{
- return -ENOSYS;
-}
-
-static inline int of_property_count_strings(struct device_node *np,
- const char *propname)
+static inline int of_property_read_string_helper(struct device_node *np,
+ const char *propname,
+ const char **out_strs, size_t sz, int index)
{
return -ENOSYS;
}
return of_property_count_elems_of_size(np, propname, sizeof(u64));
}
+/**
+ * of_property_read_string_array() - Read an array of strings from a multiple
+ * strings property.
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ * @out_strs: output array of string pointers.
+ * @sz: number of array elements to read.
+ *
+ * Search for a property in a device tree node and retrieve a list of
+ * terminated string values (pointer to data, not a copy) in that property.
+ *
+ * If @out_strs is NULL, the number of strings in the property is returned.
+ */
+static inline int of_property_read_string_array(struct device_node *np,
+ const char *propname, const char **out_strs,
+ size_t sz)
+{
+ return of_property_read_string_helper(np, propname, out_strs, sz, 0);
+}
+
+/**
+ * of_property_count_strings() - Find and return the number of strings from a
+ * multiple strings property.
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ *
+ * Search for a property in a device tree node and retrieve the number of null
+ * terminated string contain in it. Returns the number of strings on
+ * success, -EINVAL if the property does not exist, -ENODATA if property
+ * does not have a value, and -EILSEQ if the string is not null-terminated
+ * within the length of the property data.
+ */
+static inline int of_property_count_strings(struct device_node *np,
+ const char *propname)
+{
+ return of_property_read_string_helper(np, propname, NULL, 0, 0);
+}
+
+/**
+ * of_property_read_string_index() - Find and read a string from a multiple
+ * strings property.
+ * @np: device node from which the property value is to be read.
+ * @propname: name of the property to be searched.
+ * @index: index of the string in the list of strings
+ * @out_string: pointer to null terminated return string, modified only if
+ * return value is 0.
+ *
+ * Search for a property in a device tree node and retrieve a null
+ * terminated string value (pointer to data, not a copy) in the list of strings
+ * contained in that property.
+ * Returns 0 on success, -EINVAL if the property does not exist, -ENODATA if
+ * property does not have a value, and -EILSEQ if the string is not
+ * null-terminated within the length of the property data.
+ *
+ * The out_string pointer is modified only if a valid string can be decoded.
+ */
+static inline int of_property_read_string_index(struct device_node *np,
+ const char *propname,
+ int index, const char **output)
+{
+ int rc = of_property_read_string_helper(np, propname, output, 1, index);
+ return rc < 0 ? rc : 0;
+}
+
/**
* of_property_read_bool - Findfrom a property
* @np: device node from which the property value is to be read.
/* CONFIG_OF_RESOLVE api */
extern int of_resolve_phandles(struct device_node *tree);
+/**
+ * of_device_is_system_power_controller - Tells if system-power-controller is found for device_node
+ * @np: Pointer to the given device_node
+ *
+ * return true if present false otherwise
+ */
+static inline bool of_device_is_system_power_controller(const struct device_node *np)
+{
+ return of_property_read_bool(np, "system-power-controller");
+}
+
#endif /* _LINUX_OF_H */
};
struct reserved_mem_ops {
- void (*device_init)(struct reserved_mem *rmem,
+ int (*device_init)(struct reserved_mem *rmem,
struct device *dev);
void (*device_release)(struct reserved_mem *rmem,
struct device *dev);
_OF_DECLARE(reservedmem, name, compat, init, reservedmem_of_init_fn)
#ifdef CONFIG_OF_RESERVED_MEM
-void of_reserved_mem_device_init(struct device *dev);
+int of_reserved_mem_device_init(struct device *dev);
void of_reserved_mem_device_release(struct device *dev);
void fdt_init_reserved_mem(void);
void fdt_reserved_mem_save_node(unsigned long node, const char *uname,
phys_addr_t base, phys_addr_t size);
#else
-static inline void of_reserved_mem_device_init(struct device *dev) { }
+static inline int of_reserved_mem_device_init(struct device *dev)
+{
+ return -ENOSYS;
+}
static inline void of_reserved_mem_device_release(struct device *pdev) { }
static inline void fdt_init_reserved_mem(void) { }
--- /dev/null
+/*
+ * OMAP GPMC (General Purpose Memory Controller) defines
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+/* Maximum Number of Chip Selects */
+#define GPMC_CS_NUM 8
+
+#define GPMC_CONFIG_WP 0x00000005
+
+#define GPMC_IRQ_FIFOEVENTENABLE 0x01
+#define GPMC_IRQ_COUNT_EVENT 0x02
+
+#define GPMC_BURST_4 4 /* 4 word burst */
+#define GPMC_BURST_8 8 /* 8 word burst */
+#define GPMC_BURST_16 16 /* 16 word burst */
+#define GPMC_DEVWIDTH_8BIT 1 /* 8-bit device width */
+#define GPMC_DEVWIDTH_16BIT 2 /* 16-bit device width */
+#define GPMC_MUX_AAD 1 /* Addr-Addr-Data multiplex */
+#define GPMC_MUX_AD 2 /* Addr-Data multiplex */
+
+/* bool type time settings */
+struct gpmc_bool_timings {
+ bool cycle2cyclediffcsen;
+ bool cycle2cyclesamecsen;
+ bool we_extra_delay;
+ bool oe_extra_delay;
+ bool adv_extra_delay;
+ bool cs_extra_delay;
+ bool time_para_granularity;
+};
+
+/*
+ * Note that all values in this struct are in nanoseconds except sync_clk
+ * (which is in picoseconds), while the register values are in gpmc_fck cycles.
+ */
+struct gpmc_timings {
+ /* Minimum clock period for synchronous mode (in picoseconds) */
+ u32 sync_clk;
+
+ /* Chip-select signal timings corresponding to GPMC_CS_CONFIG2 */
+ u32 cs_on; /* Assertion time */
+ u32 cs_rd_off; /* Read deassertion time */
+ u32 cs_wr_off; /* Write deassertion time */
+
+ /* ADV signal timings corresponding to GPMC_CONFIG3 */
+ u32 adv_on; /* Assertion time */
+ u32 adv_rd_off; /* Read deassertion time */
+ u32 adv_wr_off; /* Write deassertion time */
+
+ /* WE signals timings corresponding to GPMC_CONFIG4 */
+ u32 we_on; /* WE assertion time */
+ u32 we_off; /* WE deassertion time */
+
+ /* OE signals timings corresponding to GPMC_CONFIG4 */
+ u32 oe_on; /* OE assertion time */
+ u32 oe_off; /* OE deassertion time */
+
+ /* Access time and cycle time timings corresponding to GPMC_CONFIG5 */
+ u32 page_burst_access; /* Multiple access word delay */
+ u32 access; /* Start-cycle to first data valid delay */
+ u32 rd_cycle; /* Total read cycle time */
+ u32 wr_cycle; /* Total write cycle time */
+
+ u32 bus_turnaround;
+ u32 cycle2cycle_delay;
+
+ u32 wait_monitoring;
+ u32 clk_activation;
+
+ /* The following are only on OMAP3430 */
+ u32 wr_access; /* WRACCESSTIME */
+ u32 wr_data_mux_bus; /* WRDATAONADMUXBUS */
+
+ struct gpmc_bool_timings bool_timings;
+};
+
+/* Device timings in picoseconds */
+struct gpmc_device_timings {
+ u32 t_ceasu; /* address setup to CS valid */
+ u32 t_avdasu; /* address setup to ADV valid */
+ /* XXX: try to combine t_avdp_r & t_avdp_w. Issue is
+ * of tusb using these timings even for sync whilst
+ * ideally for adv_rd/(wr)_off it should have considered
+ * t_avdh instead. This indirectly necessitates r/w
+ * variations of t_avdp as it is possible to have one
+ * sync & other async
+ */
+ u32 t_avdp_r; /* ADV low time (what about t_cer ?) */
+ u32 t_avdp_w;
+ u32 t_aavdh; /* address hold time */
+ u32 t_oeasu; /* address setup to OE valid */
+ u32 t_aa; /* access time from ADV assertion */
+ u32 t_iaa; /* initial access time */
+ u32 t_oe; /* access time from OE assertion */
+ u32 t_ce; /* access time from CS asertion */
+ u32 t_rd_cycle; /* read cycle time */
+ u32 t_cez_r; /* read CS deassertion to high Z */
+ u32 t_cez_w; /* write CS deassertion to high Z */
+ u32 t_oez; /* OE deassertion to high Z */
+ u32 t_weasu; /* address setup to WE valid */
+ u32 t_wpl; /* write assertion time */
+ u32 t_wph; /* write deassertion time */
+ u32 t_wr_cycle; /* write cycle time */
+
+ u32 clk;
+ u32 t_bacc; /* burst access valid clock to output delay */
+ u32 t_ces; /* CS setup time to clk */
+ u32 t_avds; /* ADV setup time to clk */
+ u32 t_avdh; /* ADV hold time from clk */
+ u32 t_ach; /* address hold time from clk */
+ u32 t_rdyo; /* clk to ready valid */
+
+ u32 t_ce_rdyz; /* XXX: description ?, or use t_cez instead */
+ u32 t_ce_avd; /* CS on to ADV on delay */
+
+ /* XXX: check the possibility of combining
+ * cyc_aavhd_oe & cyc_aavdh_we
+ */
+ u8 cyc_aavdh_oe;/* read address hold time in cycles */
+ u8 cyc_aavdh_we;/* write address hold time in cycles */
+ u8 cyc_oe; /* access time from OE assertion in cycles */
+ u8 cyc_wpl; /* write deassertion time in cycles */
+ u32 cyc_iaa; /* initial access time in cycles */
+
+ /* extra delays */
+ bool ce_xdelay;
+ bool avd_xdelay;
+ bool oe_xdelay;
+ bool we_xdelay;
+};
+
+struct gpmc_settings {
+ bool burst_wrap; /* enables wrap bursting */
+ bool burst_read; /* enables read page/burst mode */
+ bool burst_write; /* enables write page/burst mode */
+ bool device_nand; /* device is NAND */
+ bool sync_read; /* enables synchronous reads */
+ bool sync_write; /* enables synchronous writes */
+ bool wait_on_read; /* monitor wait on reads */
+ bool wait_on_write; /* monitor wait on writes */
+ u32 burst_len; /* page/burst length */
+ u32 device_width; /* device bus width (8 or 16 bit) */
+ u32 mux_add_data; /* multiplex address & data */
+ u32 wait_pin; /* wait-pin to be used */
+};
+
+extern int gpmc_calc_timings(struct gpmc_timings *gpmc_t,
+ struct gpmc_settings *gpmc_s,
+ struct gpmc_device_timings *dev_t);
+
+struct gpmc_nand_regs;
+struct device_node;
+
+extern void gpmc_update_nand_reg(struct gpmc_nand_regs *reg, int cs);
+extern int gpmc_get_client_irq(unsigned irq_config);
+
+extern unsigned int gpmc_ticks_to_ns(unsigned int ticks);
+
+extern void gpmc_cs_write_reg(int cs, int idx, u32 val);
+extern int gpmc_calc_divider(unsigned int sync_clk);
+extern int gpmc_cs_set_timings(int cs, const struct gpmc_timings *t);
+extern int gpmc_cs_program_settings(int cs, struct gpmc_settings *p);
+extern int gpmc_cs_request(int cs, unsigned long size, unsigned long *base);
+extern void gpmc_cs_free(int cs);
+extern int gpmc_configure(int cmd, int wval);
+extern void gpmc_read_settings_dt(struct device_node *np,
+ struct gpmc_settings *p);
+
+extern void omap3_gpmc_save_context(void);
+extern void omap3_gpmc_restore_context(void);
+
+struct gpmc_timings;
+struct omap_nand_platform_data;
+struct omap_onenand_platform_data;
+
+#if IS_ENABLED(CONFIG_MTD_NAND_OMAP2)
+extern int gpmc_nand_init(struct omap_nand_platform_data *d,
+ struct gpmc_timings *gpmc_t);
+#else
+static inline int gpmc_nand_init(struct omap_nand_platform_data *d,
+ struct gpmc_timings *gpmc_t)
+{
+ return 0;
+}
+#endif
+
+#if IS_ENABLED(CONFIG_MTD_ONENAND_OMAP2)
+extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
+#else
+#define board_onenand_data NULL
+static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
+{
+}
+#endif
extern unsigned long oom_badness(struct task_struct *p,
struct mem_cgroup *memcg, const nodemask_t *nodemask,
unsigned long totalpages);
+
+extern int oom_kills_count(void);
+extern void note_oom_kill(void);
extern void oom_kill_process(struct task_struct *p, gfp_t gfp_mask, int order,
unsigned int points, unsigned long totalpages,
struct mem_cgroup *memcg, nodemask_t *nodemask,
#define __LINUX_PAGEISOLATION_H
#ifdef CONFIG_MEMORY_ISOLATION
+static inline bool has_isolate_pageblock(struct zone *zone)
+{
+ return zone->nr_isolate_pageblock;
+}
static inline bool is_migrate_isolate_page(struct page *page)
{
return get_pageblock_migratetype(page) == MIGRATE_ISOLATE;
return migratetype == MIGRATE_ISOLATE;
}
#else
+static inline bool has_isolate_pageblock(struct zone *zone)
+{
+ return false;
+}
static inline bool is_migrate_isolate_page(struct page *page)
{
return false;
if (pci_is_root_bus(pbus))
dev = pbus->bridge;
- else
+ else {
+ /* If pbus is a virtual bus, there is no bridge to it */
+ if (!pbus->self)
+ return NULL;
+
dev = &pbus->self->dev;
+ }
return ACPI_HANDLE(dev);
}
unsigned int is_added:1;
unsigned int is_busmaster:1; /* device is busmaster */
unsigned int no_msi:1; /* device may not use msi */
+ unsigned int no_64bit_msi:1; /* device may only use 32-bit MSIs */
unsigned int block_cfg_access:1; /* config space access is blocked */
unsigned int broken_parity_status:1; /* Device generates false positive parity */
unsigned int irq_reroute_variant:2; /* device needs IRQ rerouting variant */
#define PCI_DEVICE_ID_AMD_15H_M10H_F3 0x1403
#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F3 0x141d
#define PCI_DEVICE_ID_AMD_15H_M30H_NB_F4 0x141e
+#define PCI_DEVICE_ID_AMD_15H_M60H_NB_F3 0x1573
+#define PCI_DEVICE_ID_AMD_15H_M60H_NB_F4 0x1574
#define PCI_DEVICE_ID_AMD_15H_NB_F0 0x1600
#define PCI_DEVICE_ID_AMD_15H_NB_F1 0x1601
#define PCI_DEVICE_ID_AMD_15H_NB_F2 0x1602
/* paired with smp_store_release() in percpu_ref_reinit() */
smp_read_barrier_depends();
- if (unlikely(percpu_ptr & __PERCPU_REF_ATOMIC))
+ /*
+ * Theoretically, the following could test just ATOMIC; however,
+ * then we'd have to mask off DEAD separately as DEAD may be
+ * visible without ATOMIC if we race with percpu_ref_kill(). DEAD
+ * implies ATOMIC anyway. Test them together.
+ */
+ if (unlikely(percpu_ptr & __PERCPU_REF_ATOMIC_DEAD))
return false;
*percpu_countp = (unsigned long __percpu *)percpu_ptr;
struct perf_branch_entry entries[0];
};
-struct perf_regs_user {
+struct perf_regs {
__u64 abi;
struct pt_regs *regs;
};
struct perf_sample_data {
- u64 type;
+ /*
+ * Fields set by perf_sample_data_init(), group so as to
+ * minimize the cachelines touched.
+ */
+ u64 addr;
+ struct perf_raw_record *raw;
+ struct perf_branch_stack *br_stack;
+ u64 period;
+ u64 weight;
+ u64 txn;
+ union perf_mem_data_src data_src;
+ /*
+ * The other fields, optionally {set,used} by
+ * perf_{prepare,output}_sample().
+ */
+ u64 type;
u64 ip;
struct {
u32 pid;
u32 tid;
} tid_entry;
u64 time;
- u64 addr;
u64 id;
u64 stream_id;
struct {
u32 cpu;
u32 reserved;
} cpu_entry;
- u64 period;
- union perf_mem_data_src data_src;
struct perf_callchain_entry *callchain;
- struct perf_raw_record *raw;
- struct perf_branch_stack *br_stack;
- struct perf_regs_user regs_user;
+ struct perf_regs regs_user;
+ struct perf_regs regs_intr;
u64 stack_user_size;
- u64 weight;
- /*
- * Transaction flags for abort events:
- */
- u64 txn;
-};
+} ____cacheline_aligned;
/* default value for data source */
#define PERF_MEM_NA (PERF_MEM_S(OP, NA) |\
data->raw = NULL;
data->br_stack = NULL;
data->period = period;
- data->regs_user.abi = PERF_SAMPLE_REGS_ABI_NONE;
- data->regs_user.regs = NULL;
- data->stack_user_size = 0;
data->weight = 0;
data->data_src.val = PERF_MEM_NA;
data->txn = 0;
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+int pl320_ipc_transmit(u32 *data);
+int pl320_ipc_register_notifier(struct notifier_block *nb);
+int pl320_ipc_unregister_notifier(struct notifier_block *nb);
--- /dev/null
+/*
+ * MMC definitions for OMAP2
+ *
+ * Copyright (C) 2006 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+/*
+ * struct omap_hsmmc_dev_attr.flags possibilities
+ *
+ * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can
+ * operate with either 1.8Vdc or 3.0Vdc card voltages; this flag
+ * should be set if this is the case. See for example Section 22.5.3
+ * "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia
+ * Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R).
+ *
+ * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers
+ * don't work correctly on some MMC controller instances on some
+ * OMAP3 SoCs; this flag should be set if this is the case. See
+ * for example Advisory 2.1.1.128 "MMC: Multiple Block Read
+ * Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_
+ * Revision F (October 2010) (SPRZ278F).
+ */
+#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0)
+#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1)
+#define OMAP_HSMMC_SWAKEUP_MISSING BIT(2)
+
+struct omap_hsmmc_dev_attr {
+ u8 flags;
+};
+
+struct mmc_card;
+
+struct omap_hsmmc_platform_data {
+ /* back-link to device */
+ struct device *dev;
+
+ /* set if your board has components or wiring that limits the
+ * maximum frequency on the MMC bus */
+ unsigned int max_freq;
+
+ /* Integrating attributes from the omap_hwmod layer */
+ u8 controller_flags;
+
+ /* Register offset deviation */
+ u16 reg_offset;
+
+ /*
+ * 4/8 wires and any additional host capabilities
+ * need to OR'd all capabilities (ref. linux/mmc/host.h)
+ */
+ u32 caps; /* Used for the MMC driver on 2430 and later */
+ u32 pm_caps; /* PM capabilities of the mmc */
+
+ /* switch pin can be for card detect (default) or card cover */
+ unsigned cover:1;
+
+ /* use the internal clock */
+ unsigned internal_clock:1;
+
+ /* nonremovable e.g. eMMC */
+ unsigned nonremovable:1;
+
+ /* eMMC does not handle power off when not in sleep state */
+ unsigned no_regulator_off_init:1;
+
+ /* we can put the features above into this variable */
+#define HSMMC_HAS_PBIAS (1 << 0)
+#define HSMMC_HAS_UPDATED_RESET (1 << 1)
+#define HSMMC_HAS_HSPE_SUPPORT (1 << 2)
+ unsigned features;
+
+ int switch_pin; /* gpio (card detect) */
+ int gpio_wp; /* gpio (write protect) */
+
+ int (*set_power)(struct device *dev, int power_on, int vdd);
+ void (*remux)(struct device *dev, int power_on);
+ /* Call back before enabling / disabling regulators */
+ void (*before_set_reg)(struct device *dev, int power_on, int vdd);
+ /* Call back after enabling / disabling regulators */
+ void (*after_set_reg)(struct device *dev, int power_on, int vdd);
+ /* if we have special card, init it using this callback */
+ void (*init_card)(struct mmc_card *card);
+
+ const char *name;
+ u32 ocr_mask;
+};
--- /dev/null
+#ifndef __MMC_ATMEL_MCI_H
+#define __MMC_ATMEL_MCI_H
+
+#include <linux/platform_data/dma-atmel.h>
+#include <linux/platform_data/dma-dw.h>
+
+/**
+ * struct mci_dma_data - DMA data for MCI interface
+ */
+struct mci_dma_data {
+#ifdef CONFIG_ARM
+ struct at_dma_slave sdata;
+#else
+ struct dw_dma_slave sdata;
+#endif
+};
+
+/* accessor macros */
+#define slave_data_ptr(s) (&(s)->sdata)
+#define find_slave_dev(s) ((s)->sdata.dma_dev)
+
+#endif /* __MMC_ATMEL_MCI_H */
#define OMAP_MMC_MAX_SLOTS 2
-/*
- * struct omap_mmc_dev_attr.flags possibilities
- *
- * OMAP_HSMMC_SUPPORTS_DUAL_VOLT: Some HSMMC controller instances can
- * operate with either 1.8Vdc or 3.0Vdc card voltages; this flag
- * should be set if this is the case. See for example Section 22.5.3
- * "MMC/SD/SDIO1 Bus Voltage Selection" of the OMAP34xx Multimedia
- * Device Silicon Revision 3.1.x Revision ZR (July 2011) (SWPU223R).
- *
- * OMAP_HSMMC_BROKEN_MULTIBLOCK_READ: Multiple-block read transfers
- * don't work correctly on some MMC controller instances on some
- * OMAP3 SoCs; this flag should be set if this is the case. See
- * for example Advisory 2.1.1.128 "MMC: Multiple Block Read
- * Operation Issue" in _OMAP3530/3525/3515/3503 Silicon Errata_
- * Revision F (October 2010) (SPRZ278F).
- */
-#define OMAP_HSMMC_SUPPORTS_DUAL_VOLT BIT(0)
-#define OMAP_HSMMC_BROKEN_MULTIBLOCK_READ BIT(1)
-#define OMAP_HSMMC_SWAKEUP_MISSING BIT(2)
-
struct mmc_card;
-struct omap_mmc_dev_attr {
- u8 flags;
-};
-
struct omap_mmc_platform_data {
/* back-link to device */
struct device *dev;
unsigned vcc_aux_disable_is_sleep:1;
/* we can put the features above into this variable */
-#define HSMMC_HAS_PBIAS (1 << 0)
-#define HSMMC_HAS_UPDATED_RESET (1 << 1)
-#define HSMMC_HAS_HSPE_SUPPORT (1 << 2)
#define MMC_OMAP7XX (1 << 3)
#define MMC_OMAP15XX (1 << 4)
#define MMC_OMAP16XX (1 << 5)
unsigned int quirks2;
unsigned int pm_caps;
};
-
-struct sdhci_pxa {
- u8 clk_enable;
- u8 power_mode;
-};
#endif /* _PXA_SDHCI_H_ */
unsigned int dma_rx_timeout;
unsigned int autosuspend_timeout;
unsigned int dma_rx_poll_rate;
- int DTR_gpio;
- int DTR_inverted;
- int DTR_present;
int (*get_context_loss_count)(struct device *);
void (*enable_wakeup)(struct device *, bool);
bool max_off_time_changed;
bool cached_power_down_ok;
struct gpd_cpuidle_data *cpuidle_data;
- void (*attach_dev)(struct device *dev);
- void (*detach_dev)(struct device *dev);
+ int (*attach_dev)(struct generic_pm_domain *domain,
+ struct device *dev);
+ void (*detach_dev)(struct generic_pm_domain *domain,
+ struct device *dev);
};
static inline struct generic_pm_domain *pd_to_genpd(struct dev_pm_domain *pd)
struct notifier_block nb;
struct mutex lock;
unsigned int refcount;
- bool need_restore;
+ int need_restore;
};
#ifdef CONFIG_PM_GENERIC_DOMAINS
PM_QOS_CPU_DMA_LATENCY,
PM_QOS_NETWORK_LATENCY,
PM_QOS_NETWORK_THROUGHPUT,
+ PM_QOS_MEMORY_BANDWIDTH,
/* insert new class ID */
PM_QOS_NUM_CLASSES,
#define PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE (2000 * USEC_PER_SEC)
#define PM_QOS_NETWORK_LAT_DEFAULT_VALUE (2000 * USEC_PER_SEC)
#define PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE 0
+#define PM_QOS_MEMORY_BANDWIDTH_DEFAULT_VALUE 0
#define PM_QOS_RESUME_LATENCY_DEFAULT_VALUE 0
#define PM_QOS_LATENCY_TOLERANCE_DEFAULT_VALUE 0
#define PM_QOS_LATENCY_TOLERANCE_NO_CONSTRAINT (-1)
enum pm_qos_type {
PM_QOS_UNITIALIZED,
PM_QOS_MAX, /* return the largest value */
- PM_QOS_MIN /* return the smallest value */
+ PM_QOS_MIN, /* return the smallest value */
+ PM_QOS_SUM /* return the sum */
};
/*
* All rights reserved.
*
* Benny Halevy <bhalevy@panasas.com>
- * Boaz Harrosh <bharrosh@panasas.com>
+ * Boaz Harrosh <ooo@electrozaur.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2
struct device *dev;
struct charger_desc *desc;
- struct power_supply *fuel_gauge;
- struct power_supply **charger_stat;
-
#ifdef CONFIG_THERMAL
struct thermal_zone_device *tzd_batt;
#endif
void (*external_power_changed)(struct power_supply *psy);
void (*set_charged)(struct power_supply *psy);
+ /*
+ * Set if thermal zone should not be created for this power supply.
+ * For example for virtual supplies forwarding calls to actual
+ * sensors or other supplies.
+ */
+ bool no_thermal;
/* For APM emulation, think legacy userspace. */
int use_for_apm;
INVALID_RCU_FLAVOR
};
-#if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU)
+#if defined(CONFIG_TREE_RCU) || defined(CONFIG_PREEMPT_RCU)
void rcutorture_get_gp_data(enum rcutorture_type test_type, int *flags,
unsigned long *gpnum, unsigned long *completed);
void rcutorture_record_test_transition(void);
void rcu_init(void);
void rcu_sched_qs(void);
void rcu_bh_qs(void);
-void rcu_check_callbacks(int cpu, int user);
+void rcu_check_callbacks(int user);
struct notifier_block;
void rcu_idle_enter(void);
void rcu_idle_exit(void);
*/
#define cond_resched_rcu_qs() \
do { \
- rcu_note_voluntary_context_switch(current); \
- cond_resched(); \
+ if (!cond_resched()) \
+ rcu_note_voluntary_context_switch(current); \
} while (0)
#if defined(CONFIG_DEBUG_LOCK_ALLOC) || defined(CONFIG_RCU_TRACE) || defined(CONFIG_SMP)
void (*func)(struct rcu_head *head));
void wait_rcu_gp(call_rcu_func_t crf);
-#if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU)
+#if defined(CONFIG_TREE_RCU) || defined(CONFIG_PREEMPT_RCU)
#include <linux/rcutree.h>
#elif defined(CONFIG_TINY_RCU)
#include <linux/rcutiny.h>
*/
#define RCU_INITIALIZER(v) (typeof(*(v)) __force __rcu *)(v)
+/**
+ * lockless_dereference() - safely load a pointer for later dereference
+ * @p: The pointer to load
+ *
+ * Similar to rcu_dereference(), but for situations where the pointed-to
+ * object's lifetime is managed by something other than RCU. That
+ * "something other" might be reference counting or simple immortality.
+ */
+#define lockless_dereference(p) \
+({ \
+ typeof(p) _________p1 = ACCESS_ONCE(p); \
+ smp_read_barrier_depends(); /* Dependency order vs. p above. */ \
+ (_________p1); \
+})
+
/**
* rcu_assign_pointer() - assign to RCU-protected pointer
* @p: pointer to assign to
*
* In non-preemptible RCU implementations (TREE_RCU and TINY_RCU),
* it is illegal to block while in an RCU read-side critical section.
- * In preemptible RCU implementations (TREE_PREEMPT_RCU) in CONFIG_PREEMPT
+ * In preemptible RCU implementations (PREEMPT_RCU) in CONFIG_PREEMPT
* kernel builds, RCU read-side critical sections may be preempted,
* but explicit blocking is illegal. Finally, in preemptible RCU
* implementations in real-time (with -rt patchset) kernel builds, RCU
* Unfortunately, this function acquires the scheduler's runqueue and
* priority-inheritance spinlocks. This means that deadlock could result
* if the caller of rcu_read_unlock() already holds one of these locks or
- * any lock that is ever acquired while holding them.
+ * any lock that is ever acquired while holding them; or any lock which
+ * can be taken from interrupt context because rcu_boost()->rt_mutex_lock()
+ * does not disable irqs while taking ->wait_lock.
*
* That said, RCU readers are never priority boosted unless they were
* preempted. Therefore, one way to avoid deadlock is to make sure
*/
#define RCU_INIT_POINTER(p, v) \
do { \
+ rcu_dereference_sparse(p, __rcu); \
p = RCU_INITIALIZER(v); \
} while (0)
__kfree_rcu(&((ptr)->rcu_head), offsetof(typeof(*(ptr)), rcu_head))
#if defined(CONFIG_TINY_RCU) || defined(CONFIG_RCU_NOCB_CPU_ALL)
-static inline int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies)
+static inline int rcu_needs_cpu(unsigned long *delta_jiffies)
{
*delta_jiffies = ULONG_MAX;
return 0;
call_rcu(head, func);
}
-static inline void rcu_note_context_switch(int cpu)
+static inline void rcu_note_context_switch(void)
{
rcu_sched_qs();
}
#ifndef __LINUX_RCUTREE_H
#define __LINUX_RCUTREE_H
-void rcu_note_context_switch(int cpu);
+void rcu_note_context_switch(void);
#ifndef CONFIG_RCU_NOCB_CPU_ALL
-int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies);
+int rcu_needs_cpu(unsigned long *delta_jiffies);
#endif /* #ifndef CONFIG_RCU_NOCB_CPU_ALL */
void rcu_cpu_stall_reset(void);
*/
static inline void rcu_virt_note_context_switch(int cpu)
{
- rcu_note_context_switch(cpu);
+ rcu_note_context_switch();
}
void synchronize_rcu_bh(void);
struct regmap;
struct regmap_range_cfg;
struct regmap_field;
+struct snd_ac97;
/* An enum of all the supported cache types */
enum regcache_type {
struct regmap *regmap_init_mmio_clk(struct device *dev, const char *clk_id,
void __iomem *regs,
const struct regmap_config *config);
+struct regmap *regmap_init_ac97(struct snd_ac97 *ac97,
+ const struct regmap_config *config);
struct regmap *devm_regmap_init(struct device *dev,
const struct regmap_bus *bus,
struct regmap *devm_regmap_init_mmio_clk(struct device *dev, const char *clk_id,
void __iomem *regs,
const struct regmap_config *config);
+struct regmap *devm_regmap_init_ac97(struct snd_ac97 *ac97,
+ const struct regmap_config *config);
+
+bool regmap_ac97_default_volatile(struct device *dev, unsigned int reg);
/**
* regmap_init_mmio(): Initialise register map
#ifndef __LINUX_REGULATOR_CONSUMER_H_
#define __LINUX_REGULATOR_CONSUMER_H_
+#include <linux/err.h>
+
struct device;
struct notifier_block;
struct regmap;
* Data passed is "struct pre_voltage_change_data"
* ABORT_VOLTAGE_CHANGE Regulator voltage change failed for some reason.
* Data passed is old voltage cast to (void *).
+ * PRE_DISABLE Regulator is about to be disabled
+ * ABORT_DISABLE Regulator disable failed for some reason
*
* NOTE: These events can be OR'ed together when passed into handler.
*/
#define REGULATOR_EVENT_DISABLE 0x80
#define REGULATOR_EVENT_PRE_VOLTAGE_CHANGE 0x100
#define REGULATOR_EVENT_ABORT_VOLTAGE_CHANGE 0x200
+#define REGULATOR_EVENT_PRE_DISABLE 0x400
+#define REGULATOR_EVENT_ABORT_DISABLE 0x800
/**
* struct pre_voltage_change_data - Data sent with PRE_VOLTAGE_CHANGE event
static inline struct regulator *__must_check
regulator_get_exclusive(struct device *dev, const char *id)
{
- return NULL;
+ return ERR_PTR(-ENODEV);
}
static inline struct regulator *__must_check
*
* @enable_time: Time taken for initial enable of regulator (in uS).
* @off_on_delay: guard time (in uS), before re-enabling a regulator
+ *
+ * @of_map_mode: Maps a hardware mode defined in a DeviceTree to a standard mode
*/
struct regulator_desc {
const char *name;
unsigned int enable_time;
unsigned int off_on_delay;
+
+ unsigned int (*of_map_mode)(unsigned int mode);
};
/**
* NULL).
* @regmap: regmap to use for core regmap helpers if dev_get_regulator() is
* insufficient.
+ * @ena_gpio_initialized: GPIO controlling regulator enable was properly
+ * initialized, meaning that >= 0 is a valid gpio
+ * identifier and < 0 is a non existent gpio.
* @ena_gpio: GPIO controlling regulator enable.
* @ena_gpio_invert: Sense for GPIO enable control.
* @ena_gpio_flags: Flags to use when calling gpio_request_one()
struct device_node *of_node;
struct regmap *regmap;
+ bool ena_gpio_initialized;
int ena_gpio;
unsigned int ena_gpio_invert:1;
unsigned int ena_gpio_flags;
#ifndef __LINUX_OF_REG_H
#define __LINUX_OF_REG_H
+struct regulator_desc;
+
struct of_regulator_match {
const char *name;
void *driver_data;
struct regulator_init_data *init_data;
struct device_node *of_node;
+ const struct regulator_desc *desc;
};
#if defined(CONFIG_OF)
extern struct regulator_init_data
*of_get_regulator_init_data(struct device *dev,
- struct device_node *node);
+ struct device_node *node,
+ const struct regulator_desc *desc);
extern int of_regulator_match(struct device *dev, struct device_node *node,
struct of_regulator_match *matches,
unsigned int num_matches);
#else
static inline struct regulator_init_data
*of_get_regulator_init_data(struct device *dev,
- struct device_node *node)
+ struct device_node *node,
+ const struct regulator_desc *desc)
{
return NULL;
}
* things to reset the device
* @assert: manually assert the reset line, if supported
* @deassert: manually deassert the reset line, if supported
+ * @status: return the status of the reset line, if supported
*/
struct reset_control_ops {
int (*reset)(struct reset_controller_dev *rcdev, unsigned long id);
int (*assert)(struct reset_controller_dev *rcdev, unsigned long id);
int (*deassert)(struct reset_controller_dev *rcdev, unsigned long id);
+ int (*status)(struct reset_controller_dev *rcdev, unsigned long id);
};
struct module;
int reset_control_reset(struct reset_control *rstc);
int reset_control_assert(struct reset_control *rstc);
int reset_control_deassert(struct reset_control *rstc);
+int reset_control_status(struct reset_control *rstc);
struct reset_control *reset_control_get(struct device *dev, const char *id);
void reset_control_put(struct reset_control *rstc);
return 0;
}
+static inline int reset_control_status(struct reset_control *rstc)
+{
+ WARN_ON(1);
+ return 0;
+}
+
static inline void reset_control_put(struct reset_control *rstc)
{
WARN_ON(1);
__ring_buffer_alloc((size), (flags), &__key); \
})
-int ring_buffer_wait(struct ring_buffer *buffer, int cpu);
+int ring_buffer_wait(struct ring_buffer *buffer, int cpu, bool full);
int ring_buffer_poll_wait(struct ring_buffer *buffer, int cpu,
struct file *filp, poll_table *poll_table);
extern int rtc_month_days(unsigned int month, unsigned int year);
extern int rtc_year_days(unsigned int day, unsigned int month, unsigned int year);
extern int rtc_valid_tm(struct rtc_time *tm);
-extern int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time);
-extern void rtc_time_to_tm(unsigned long time, struct rtc_time *tm);
+extern time64_t rtc_tm_to_time64(struct rtc_time *tm);
+extern void rtc_time64_to_tm(time64_t time, struct rtc_time *tm);
ktime_t rtc_tm_to_ktime(struct rtc_time tm);
struct rtc_time rtc_ktime_to_tm(ktime_t kt);
+/**
+ * Deprecated. Use rtc_time64_to_tm().
+ */
+static inline void rtc_time_to_tm(unsigned long time, struct rtc_time *tm)
+{
+ rtc_time64_to_tm(time, tm);
+}
+
+/**
+ * Deprecated. Use rtc_tm_to_time64().
+ */
+static inline int rtc_tm_to_time(struct rtc_time *tm, unsigned long *time)
+{
+ *time = rtc_tm_to_time64(tm);
+
+ return 0;
+}
#include <linux/device.h>
#include <linux/seq_file.h>
((task->state & TASK_UNINTERRUPTIBLE) != 0 && \
(task->flags & PF_FROZEN) == 0)
+#ifdef CONFIG_DEBUG_ATOMIC_SLEEP
+
+#define __set_task_state(tsk, state_value) \
+ do { \
+ (tsk)->task_state_change = _THIS_IP_; \
+ (tsk)->state = (state_value); \
+ } while (0)
+#define set_task_state(tsk, state_value) \
+ do { \
+ (tsk)->task_state_change = _THIS_IP_; \
+ set_mb((tsk)->state, (state_value)); \
+ } while (0)
+
+/*
+ * set_current_state() includes a barrier so that the write of current->state
+ * is correctly serialised wrt the caller's subsequent test of whether to
+ * actually sleep:
+ *
+ * set_current_state(TASK_UNINTERRUPTIBLE);
+ * if (do_i_need_to_sleep())
+ * schedule();
+ *
+ * If the caller does not need such serialisation then use __set_current_state()
+ */
+#define __set_current_state(state_value) \
+ do { \
+ current->task_state_change = _THIS_IP_; \
+ current->state = (state_value); \
+ } while (0)
+#define set_current_state(state_value) \
+ do { \
+ current->task_state_change = _THIS_IP_; \
+ set_mb(current->state, (state_value)); \
+ } while (0)
+
+#else
+
#define __set_task_state(tsk, state_value) \
do { (tsk)->state = (state_value); } while (0)
#define set_task_state(tsk, state_value) \
*
* If the caller does not need such serialisation then use __set_current_state()
*/
-#define __set_current_state(state_value) \
+#define __set_current_state(state_value) \
do { current->state = (state_value); } while (0)
-#define set_current_state(state_value) \
+#define set_current_state(state_value) \
set_mb(current->state, (state_value))
+#endif
+
/* Task command name length */
#define TASK_COMM_LEN 16
union rcu_special rcu_read_unlock_special;
struct list_head rcu_node_entry;
#endif /* #ifdef CONFIG_PREEMPT_RCU */
-#ifdef CONFIG_TREE_PREEMPT_RCU
+#ifdef CONFIG_PREEMPT_RCU
struct rcu_node *rcu_blocked_node;
-#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+#endif /* #ifdef CONFIG_PREEMPT_RCU */
#ifdef CONFIG_TASKS_RCU
unsigned long rcu_tasks_nvcsw;
bool rcu_tasks_holdout;
struct numa_group *numa_group;
/*
- * Exponential decaying average of faults on a per-node basis.
- * Scheduling placement decisions are made based on the these counts.
- * The values remain static for the duration of a PTE scan
+ * numa_faults is an array split into four regions:
+ * faults_memory, faults_cpu, faults_memory_buffer, faults_cpu_buffer
+ * in this precise order.
+ *
+ * faults_memory: Exponential decaying average of faults on a per-node
+ * basis. Scheduling placement decisions are made based on these
+ * counts. The values remain static for the duration of a PTE scan.
+ * faults_cpu: Track the nodes the process was running on when a NUMA
+ * hinting fault was incurred.
+ * faults_memory_buffer and faults_cpu_buffer: Record faults per node
+ * during the current scan window. When the scan completes, the counts
+ * in faults_memory and faults_cpu decay and these values are copied.
*/
- unsigned long *numa_faults_memory;
+ unsigned long *numa_faults;
unsigned long total_numa_faults;
- /*
- * numa_faults_buffer records faults per node during the current
- * scan window. When the scan completes, the counts in
- * numa_faults_memory decay and these values are copied.
- */
- unsigned long *numa_faults_buffer_memory;
-
- /*
- * Track the nodes the process was running on when a NUMA hinting
- * fault was incurred.
- */
- unsigned long *numa_faults_cpu;
- unsigned long *numa_faults_buffer_cpu;
-
/*
* numa_faults_locality tracks if faults recorded during the last
* scan window were remote/local. The task scan period is adapted
unsigned int sequential_io;
unsigned int sequential_io_avg;
#endif
+#ifdef CONFIG_DEBUG_ATOMIC_SLEEP
+ unsigned long task_state_change;
+#endif
};
/* Future-safe accessor for struct task_struct's cpus_allowed. */
task->flags |= orig_flags & flags;
}
+extern int cpuset_cpumask_can_shrink(const struct cpumask *cur,
+ const struct cpumask *trial);
+extern int task_can_attach(struct task_struct *p,
+ const struct cpumask *cs_cpus_allowed);
#ifdef CONFIG_SMP
extern void do_set_cpus_allowed(struct task_struct *p,
const struct cpumask *new_mask);
extern int _cond_resched(void);
#define cond_resched() ({ \
- __might_sleep(__FILE__, __LINE__, 0); \
+ ___might_sleep(__FILE__, __LINE__, 0); \
_cond_resched(); \
})
#endif
#define cond_resched_lock(lock) ({ \
- __might_sleep(__FILE__, __LINE__, PREEMPT_LOCK_OFFSET); \
+ ___might_sleep(__FILE__, __LINE__, PREEMPT_LOCK_OFFSET);\
__cond_resched_lock(lock); \
})
extern int __cond_resched_softirq(void);
#define cond_resched_softirq() ({ \
- __might_sleep(__FILE__, __LINE__, SOFTIRQ_DISABLE_OFFSET); \
+ ___might_sleep(__FILE__, __LINE__, SOFTIRQ_DISABLE_OFFSET); \
__cond_resched_softirq(); \
})
/* fields enclosed in headers_start/headers_end are copied
* using a single memcpy() in __copy_skb_header()
*/
+ /* private: */
__u32 headers_start[0];
+ /* public: */
/* if you move pkt_type around you also must adapt those constants */
#ifdef __BIG_ENDIAN_BITFIELD
__u16 network_header;
__u16 mac_header;
+ /* private: */
__u32 headers_end[0];
+ /* public: */
/* These elements must be at the end, see alloc_skb() for details. */
sk_buff_data_t tail;
* @skb: buffer
*
* Returns true is skb is a fast clone, and its clone is not freed.
+ * Some drivers call skb_orphan() in their ndo_start_xmit(),
+ * so we also check that this didnt happen.
*/
-static inline bool skb_fclone_busy(const struct sk_buff *skb)
+static inline bool skb_fclone_busy(const struct sock *sk,
+ const struct sk_buff *skb)
{
const struct sk_buff_fclones *fclones;
fclones = container_of(skb, struct sk_buff_fclones, skb1);
return skb->fclone == SKB_FCLONE_ORIG &&
- fclones->skb2.fclone == SKB_FCLONE_CLONE;
+ fclones->skb2.fclone == SKB_FCLONE_CLONE &&
+ fclones->skb2.sk == sk;
}
static inline struct sk_buff *alloc_skb_fclone(unsigned int size,
#define MSG_EOF MSG_FIN
#define MSG_FASTOPEN 0x20000000 /* Send data in TCP SYN */
-#define MSG_CMSG_CLOEXEC 0x40000000 /* Set close_on_exit for file
+#define MSG_CMSG_CLOEXEC 0x40000000 /* Set close_on_exec for file
descriptor received through
SCM_RIGHTS */
#if defined(CONFIG_COMPAT)
#endif
extern ssize_t memory_read_from_buffer(void *to, size_t count, loff_t *ppos,
- const void *from, size_t available);
+ const void *from, size_t available);
/**
* strstarts - does @str start with @prefix?
return strncmp(str, prefix, strlen(prefix)) == 0;
}
-extern size_t memweight(const void *ptr, size_t bytes);
+size_t memweight(const void *ptr, size_t bytes);
+void memzero_explicit(void *s, size_t count);
/**
* kbasename - return the last part of a pathname.
#define KELVIN_TO_CELSIUS(t) (long)(((long)t-2732 >= 0) ? \
((long)t-2732+5)/10 : ((long)t-2732-5)/10)
#define CELSIUS_TO_KELVIN(t) ((t)*10+2732)
+#define DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(t, off) (((t) - (off)) * 100)
+#define DECI_KELVIN_TO_MILLICELSIUS(t) DECI_KELVIN_TO_MILLICELSIUS_WITH_OFFSET(t, 2732)
+#define MILLICELSIUS_TO_DECI_KELVIN_WITH_OFFSET(t, off) (((t) / 100) + (off))
+#define MILLICELSIUS_TO_DECI_KELVIN(t) MILLICELSIUS_TO_DECI_KELVIN_WITH_OFFSET(t, 2732)
/* Adding event notification support elements */
#define THERMAL_GENL_FAMILY_NAME "thermal_event"
return lhs->tv_usec - rhs->tv_usec;
}
-extern unsigned long mktime(const unsigned int year, const unsigned int mon,
- const unsigned int day, const unsigned int hour,
- const unsigned int min, const unsigned int sec);
+extern time64_t mktime64(const unsigned int year, const unsigned int mon,
+ const unsigned int day, const unsigned int hour,
+ const unsigned int min, const unsigned int sec);
+
+/**
+ * Deprecated. Use mktime64().
+ */
+static inline unsigned long mktime(const unsigned int year,
+ const unsigned int mon, const unsigned int day,
+ const unsigned int hour, const unsigned int min,
+ const unsigned int sec)
+{
+ return mktime64(year, mon, day, hour, min, sec);
+}
extern void set_normalized_timespec(struct timespec *ts, time_t sec, s64 nsec);
* Get and set timeofday
*/
extern void do_gettimeofday(struct timeval *tv);
-extern int do_settimeofday(const struct timespec *tv);
+extern int do_settimeofday64(const struct timespec64 *ts);
extern int do_sys_settimeofday(const struct timespec *tv,
const struct timezone *tz);
/*
* timespec based interfaces
*/
-struct timespec get_monotonic_coarse(void);
-extern void getrawmonotonic(struct timespec *ts);
+struct timespec64 get_monotonic_coarse64(void);
+extern void getrawmonotonic64(struct timespec64 *ts);
extern void ktime_get_ts64(struct timespec64 *ts);
extern int __getnstimeofday64(struct timespec64 *tv);
extern void getnstimeofday64(struct timespec64 *tv);
#if BITS_PER_LONG == 64
+/**
+ * Deprecated. Use do_settimeofday64().
+ */
+static inline int do_settimeofday(const struct timespec *ts)
+{
+ return do_settimeofday64(ts);
+}
+
static inline int __getnstimeofday(struct timespec *ts)
{
return __getnstimeofday64(ts);
getnstimeofday64(ts);
}
+static inline void getrawmonotonic(struct timespec *ts)
+{
+ getrawmonotonic64(ts);
+}
+
+static inline struct timespec get_monotonic_coarse(void)
+{
+ return get_monotonic_coarse64();
+}
#else
+/**
+ * Deprecated. Use do_settimeofday64().
+ */
+static inline int do_settimeofday(const struct timespec *ts)
+{
+ struct timespec64 ts64;
+
+ ts64 = timespec_to_timespec64(*ts);
+ return do_settimeofday64(&ts64);
+}
+
static inline int __getnstimeofday(struct timespec *ts)
{
struct timespec64 ts64;
getnstimeofday64(&ts64);
*ts = timespec64_to_timespec(ts64);
}
+
+static inline void getrawmonotonic(struct timespec *ts)
+{
+ struct timespec64 ts64;
+
+ getrawmonotonic64(&ts64);
+ *ts = timespec64_to_timespec(ts64);
+}
+
+static inline struct timespec get_monotonic_coarse(void)
+{
+ return timespec64_to_timespec(get_monotonic_coarse64());
+}
#endif
extern void getboottime(struct timespec *ts);
/*
* RTC specific
*/
-extern void timekeeping_inject_sleeptime(struct timespec *delta);
+extern void timekeeping_inject_sleeptime64(struct timespec64 *delta);
/*
* PPS accessor
#define MAX_UIO_PORT_REGIONS 5
-struct uio_device;
+struct uio_device {
+ struct module *owner;
+ struct device *dev;
+ int minor;
+ atomic_t event;
+ struct fasync_struct *async_queue;
+ wait_queue_head_t wait;
+ struct uio_info *info;
+ struct kobject *map_dir;
+ struct kobject *portio_dir;
+};
/**
* struct uio_info - UIO device capabilities
struct xol_area *xol_area;
};
-extern int __weak set_swbp(struct arch_uprobe *aup, struct mm_struct *mm, unsigned long vaddr);
-extern int __weak set_orig_insn(struct arch_uprobe *aup, struct mm_struct *mm, unsigned long vaddr);
-extern bool __weak is_swbp_insn(uprobe_opcode_t *insn);
-extern bool __weak is_trap_insn(uprobe_opcode_t *insn);
-extern unsigned long __weak uprobe_get_swbp_addr(struct pt_regs *regs);
+extern int set_swbp(struct arch_uprobe *aup, struct mm_struct *mm, unsigned long vaddr);
+extern int set_orig_insn(struct arch_uprobe *aup, struct mm_struct *mm, unsigned long vaddr);
+extern bool is_swbp_insn(uprobe_opcode_t *insn);
+extern bool is_trap_insn(uprobe_opcode_t *insn);
+extern unsigned long uprobe_get_swbp_addr(struct pt_regs *regs);
extern unsigned long uprobe_get_trap_addr(struct pt_regs *regs);
extern int uprobe_write_opcode(struct mm_struct *mm, unsigned long vaddr, uprobe_opcode_t);
extern int uprobe_register(struct inode *inode, loff_t offset, struct uprobe_consumer *uc);
extern int arch_uprobe_exception_notify(struct notifier_block *self, unsigned long val, void *data);
extern void arch_uprobe_abort_xol(struct arch_uprobe *aup, struct pt_regs *regs);
extern unsigned long arch_uretprobe_hijack_return_addr(unsigned long trampoline_vaddr, struct pt_regs *regs);
-extern bool __weak arch_uprobe_ignore(struct arch_uprobe *aup, struct pt_regs *regs);
-extern void __weak arch_uprobe_copy_ixol(struct page *page, unsigned long vaddr,
+extern bool arch_uprobe_ignore(struct arch_uprobe *aup, struct pt_regs *regs);
+extern void arch_uprobe_copy_ixol(struct page *page, unsigned long vaddr,
void *src, unsigned long len);
#else /* !CONFIG_UPROBES */
struct uprobes_state {
# define EVENT_NO_RUNTIME_PM 9
# define EVENT_RX_KILL 10
# define EVENT_LINK_CHANGE 11
+# define EVENT_SET_RX_MODE 12
};
static inline struct usb_driver *driver_of(struct usb_interface *intf)
/* called by minidriver when receiving indication */
void (*indication)(struct usbnet *dev, void *ind, int indlen);
+ /* rx mode change (device changes address list filtering) */
+ void (*set_rx_mode)(struct usbnet *dev);
+
/* for new devices, use the descriptor-reading code instead */
int in; /* rx endpoint */
int out; /* tx endpoint */
#define _LINUX_VEXPRESS_H
#include <linux/device.h>
-#include <linux/platform_device.h>
-#include <linux/reboot.h>
#include <linux/regmap.h>
#define VEXPRESS_SITE_MB 0
#define VEXPRESS_SITE_DB2 2
#define VEXPRESS_SITE_MASTER 0xf
-#define VEXPRESS_RES_FUNC(_site, _func) \
-{ \
- .start = (_site), \
- .end = (_func), \
- .flags = IORESOURCE_BUS, \
-}
-
/* Config infrastructure */
void vexpress_config_set_master(u32 site);
/* Platform control */
-unsigned int vexpress_get_mci_cardin(struct device *dev);
-u32 vexpress_get_procid(int site);
-void *vexpress_get_24mhz_clock_base(void);
void vexpress_flags_set(u32 data);
-void vexpress_sysreg_early_init(void __iomem *base);
-int vexpress_syscfg_device_register(struct platform_device *pdev);
-
-/* Clocks */
-
-void vexpress_clk_init(void __iomem *sp810_base);
-
#endif
typedef int (*wait_queue_func_t)(wait_queue_t *wait, unsigned mode, int flags, void *key);
int default_wake_function(wait_queue_t *wait, unsigned mode, int flags, void *key);
+/* __wait_queue::flags */
+#define WQ_FLAG_EXCLUSIVE 0x01
+#define WQ_FLAG_WOKEN 0x02
+
struct __wait_queue {
unsigned int flags;
-#define WQ_FLAG_EXCLUSIVE 0x01
void *private;
wait_queue_func_t func;
struct list_head task_list;
*/
#define wait_event(wq, condition) \
do { \
+ might_sleep(); \
if (condition) \
break; \
__wait_event(wq, condition); \
} while (0)
+#define __wait_event_freezable(wq, condition) \
+ ___wait_event(wq, condition, TASK_INTERRUPTIBLE, 0, 0, \
+ schedule(); try_to_freeze())
+
+/**
+ * wait_event - sleep (or freeze) until a condition gets true
+ * @wq: the waitqueue to wait on
+ * @condition: a C expression for the event to wait for
+ *
+ * The process is put to sleep (TASK_INTERRUPTIBLE -- so as not to contribute
+ * to system load) until the @condition evaluates to true. The
+ * @condition is checked each time the waitqueue @wq is woken up.
+ *
+ * wake_up() has to be called after changing any variable that could
+ * change the result of the wait condition.
+ */
+#define wait_event_freezable(wq, condition) \
+({ \
+ int __ret = 0; \
+ might_sleep(); \
+ if (!(condition)) \
+ __ret = __wait_event_freezable(wq, condition); \
+ __ret; \
+})
+
#define __wait_event_timeout(wq, condition, timeout) \
___wait_event(wq, ___wait_cond_timeout(condition), \
TASK_UNINTERRUPTIBLE, 0, timeout, \
#define wait_event_timeout(wq, condition, timeout) \
({ \
long __ret = timeout; \
+ might_sleep(); \
if (!___wait_cond_timeout(condition)) \
__ret = __wait_event_timeout(wq, condition, timeout); \
__ret; \
})
+#define __wait_event_freezable_timeout(wq, condition, timeout) \
+ ___wait_event(wq, ___wait_cond_timeout(condition), \
+ TASK_INTERRUPTIBLE, 0, timeout, \
+ __ret = schedule_timeout(__ret); try_to_freeze())
+
+/*
+ * like wait_event_timeout() -- except it uses TASK_INTERRUPTIBLE to avoid
+ * increasing load and is freezable.
+ */
+#define wait_event_freezable_timeout(wq, condition, timeout) \
+({ \
+ long __ret = timeout; \
+ might_sleep(); \
+ if (!___wait_cond_timeout(condition)) \
+ __ret = __wait_event_freezable_timeout(wq, condition, timeout); \
+ __ret; \
+})
+
#define __wait_event_cmd(wq, condition, cmd1, cmd2) \
(void)___wait_event(wq, condition, TASK_UNINTERRUPTIBLE, 0, 0, \
cmd1; schedule(); cmd2)
*/
#define wait_event_cmd(wq, condition, cmd1, cmd2) \
do { \
+ might_sleep(); \
if (condition) \
break; \
__wait_event_cmd(wq, condition, cmd1, cmd2); \
#define wait_event_interruptible(wq, condition) \
({ \
int __ret = 0; \
+ might_sleep(); \
if (!(condition)) \
__ret = __wait_event_interruptible(wq, condition); \
__ret; \
#define wait_event_interruptible_timeout(wq, condition, timeout) \
({ \
long __ret = timeout; \
+ might_sleep(); \
if (!___wait_cond_timeout(condition)) \
__ret = __wait_event_interruptible_timeout(wq, \
condition, timeout); \
#define wait_event_hrtimeout(wq, condition, timeout) \
({ \
int __ret = 0; \
+ might_sleep(); \
if (!(condition)) \
__ret = __wait_event_hrtimeout(wq, condition, timeout, \
TASK_UNINTERRUPTIBLE); \
#define wait_event_interruptible_hrtimeout(wq, condition, timeout) \
({ \
long __ret = 0; \
+ might_sleep(); \
if (!(condition)) \
__ret = __wait_event_hrtimeout(wq, condition, timeout, \
TASK_INTERRUPTIBLE); \
#define wait_event_interruptible_exclusive(wq, condition) \
({ \
int __ret = 0; \
+ might_sleep(); \
if (!(condition)) \
__ret = __wait_event_interruptible_exclusive(wq, condition);\
__ret; \
})
+#define __wait_event_freezable_exclusive(wq, condition) \
+ ___wait_event(wq, condition, TASK_INTERRUPTIBLE, 1, 0, \
+ schedule(); try_to_freeze())
+
+#define wait_event_freezable_exclusive(wq, condition) \
+({ \
+ int __ret = 0; \
+ might_sleep(); \
+ if (!(condition)) \
+ __ret = __wait_event_freezable_exclusive(wq, condition);\
+ __ret; \
+})
+
+
#define __wait_event_interruptible_locked(wq, condition, exclusive, irq) \
({ \
int __ret = 0; \
#define wait_event_killable(wq, condition) \
({ \
int __ret = 0; \
+ might_sleep(); \
if (!(condition)) \
__ret = __wait_event_killable(wq, condition); \
__ret; \
long prepare_to_wait_event(wait_queue_head_t *q, wait_queue_t *wait, int state);
void finish_wait(wait_queue_head_t *q, wait_queue_t *wait);
void abort_exclusive_wait(wait_queue_head_t *q, wait_queue_t *wait, unsigned int mode, void *key);
+long wait_woken(wait_queue_t *wait, unsigned mode, long timeout);
+int woken_wake_function(wait_queue_t *wait, unsigned mode, int sync, void *key);
int autoremove_wake_function(wait_queue_t *wait, unsigned mode, int sync, void *key);
int wake_bit_function(wait_queue_t *wait, unsigned mode, int sync, void *key);
static inline int
wait_on_bit(void *word, int bit, unsigned mode)
{
+ might_sleep();
if (!test_bit(bit, word))
return 0;
return out_of_line_wait_on_bit(word, bit,
static inline int
wait_on_bit_io(void *word, int bit, unsigned mode)
{
+ might_sleep();
if (!test_bit(bit, word))
return 0;
return out_of_line_wait_on_bit(word, bit,
static inline int
wait_on_bit_action(void *word, int bit, wait_bit_action_f *action, unsigned mode)
{
+ might_sleep();
if (!test_bit(bit, word))
return 0;
return out_of_line_wait_on_bit(word, bit, action, mode);
static inline int
wait_on_bit_lock(void *word, int bit, unsigned mode)
{
+ might_sleep();
if (!test_and_set_bit(bit, word))
return 0;
return out_of_line_wait_on_bit_lock(word, bit, bit_wait, mode);
static inline int
wait_on_bit_lock_io(void *word, int bit, unsigned mode)
{
+ might_sleep();
if (!test_and_set_bit(bit, word))
return 0;
return out_of_line_wait_on_bit_lock(word, bit, bit_wait_io, mode);
static inline int
wait_on_bit_lock_action(void *word, int bit, wait_bit_action_f *action, unsigned mode)
{
+ might_sleep();
if (!test_and_set_bit(bit, word))
return 0;
return out_of_line_wait_on_bit_lock(word, bit, action, mode);
static inline
int wait_on_atomic_t(atomic_t *val, int (*action)(atomic_t *), unsigned mode)
{
+ might_sleep();
if (atomic_read(val) == 0)
return 0;
return out_of_line_wait_on_atomic_t(val, action, mode);
#define WDOG_UNREGISTERED 4 /* Has the device been unregistered */
};
-#ifdef CONFIG_WATCHDOG_NOWAYOUT
-#define WATCHDOG_NOWAYOUT 1
-#define WATCHDOG_NOWAYOUT_INIT_STATUS (1 << WDOG_NO_WAY_OUT)
-#else
-#define WATCHDOG_NOWAYOUT 0
-#define WATCHDOG_NOWAYOUT_INIT_STATUS 0
-#endif
+#define WATCHDOG_NOWAYOUT IS_BUILTIN(CONFIG_WATCHDOG_NOWAYOUT)
+#define WATCHDOG_NOWAYOUT_INIT_STATUS (WATCHDOG_NOWAYOUT << WDOG_NO_WAY_OUT)
/* Use the following function to check whether or not the watchdog is active */
static inline bool watchdog_active(struct watchdog_device *wdd)
* @list: used to maintain a list of currently available transports
* @name: the human-readable name of the transport
* @maxsize: transport provided maximum packet size
- * @pref: Preferences of this transport
* @def: set if this transport should be considered the default
* @create: member function to create a new connection on this transport
* @close: member function to discard a connection on this transport
int inet_ctl_sock_create(struct sock **sk, unsigned short family,
unsigned short type, unsigned char protocol,
struct net *net);
+int inet_recv_error(struct sock *sk, struct msghdr *msg, int len,
+ int *addr_len);
static inline void inet_ctl_sock_destroy(struct sock *sk)
{
return __ipv6_addr_diff(a1, a2, sizeof(struct in6_addr));
}
+void ipv6_proxy_select_ident(struct sk_buff *skb);
+
int ip6_dst_hoplimit(struct dst_entry *dst);
static inline int ip6_sk_dst_hoplimit(struct ipv6_pinfo *np, struct flowi6 *fl6,
#ifndef _IPV4_NF_REJECT_H
#define _IPV4_NF_REJECT_H
+#include <linux/skbuff.h>
+#include <net/ip.h>
#include <net/icmp.h>
static inline void nf_send_unreach(struct sk_buff *skb_in, int code)
void nf_send_reset(struct sk_buff *oldskb, int hook);
+const struct tcphdr *nf_reject_ip_tcphdr_get(struct sk_buff *oldskb,
+ struct tcphdr *_oth, int hook);
+struct iphdr *nf_reject_iphdr_put(struct sk_buff *nskb,
+ const struct sk_buff *oldskb,
+ __be16 protocol, int ttl);
+void nf_reject_ip_tcphdr_put(struct sk_buff *nskb, const struct sk_buff *oldskb,
+ const struct tcphdr *oth);
+
#endif /* _IPV4_NF_REJECT_H */
void nf_send_reset6(struct net *net, struct sk_buff *oldskb, int hook);
+const struct tcphdr *nf_reject_ip6_tcphdr_get(struct sk_buff *oldskb,
+ struct tcphdr *otcph,
+ unsigned int *otcplen, int hook);
+struct ipv6hdr *nf_reject_ip6hdr_put(struct sk_buff *nskb,
+ const struct sk_buff *oldskb,
+ __be16 protocol, int hoplimit);
+void nf_reject_ip6_tcphdr_put(struct sk_buff *nskb,
+ const struct sk_buff *oldskb,
+ const struct tcphdr *oth, unsigned int otcplen);
+
#endif /* _IPV6_NF_REJECT_H */
/**
* struct nft_trans - nf_tables object update in transaction
*
- * @rcu_head: rcu head to defer release of transaction data
* @list: used internally
* @msg_type: message type
* @ctx: transaction context
* @data: internal information related to the transaction
*/
struct nft_trans {
- struct rcu_head rcu_head;
struct list_head list;
int msg_type;
struct nft_ctx ctx;
NFT_CHAIN_T_MAX
};
+int nft_chain_validate_dependency(const struct nft_chain *chain,
+ enum nft_chain_type type);
+
struct nft_stats {
u64 bytes;
u64 pkts;
int nft_masq_dump(struct sk_buff *skb, const struct nft_expr *expr);
+int nft_masq_validate(const struct nft_ctx *ctx, const struct nft_expr *expr,
+ const struct nft_data **data);
+
#endif /* _NFT_MASQ_H_ */
if (!__rc) { \
*(__timeo) = schedule_timeout(*(__timeo)); \
} \
+ sched_annotate_sleep(); \
lock_sock(__sk); \
__rc = __condition; \
__rc; \
return iptunnel_handle_offloads(skb, udp_csum, type);
}
+static inline void udp_tunnel_gro_complete(struct sk_buff *skb, int nhoff)
+{
+ struct udphdr *uh;
+
+ uh = (struct udphdr *)(skb->data + nhoff - sizeof(struct udphdr));
+ skb_shinfo(skb)->gso_type |= uh->check ?
+ SKB_GSO_UDP_TUNNEL_CSUM : SKB_GSO_UDP_TUNNEL;
+}
+
static inline void udp_tunnel_encap_enable(struct socket *sock)
{
#if IS_ENABLED(CONFIG_IPV6)
#define VNI_HASH_BITS 10
#define VNI_HASH_SIZE (1<<VNI_HASH_BITS)
+/* VXLAN protocol header */
+struct vxlanhdr {
+ __be32 vx_flags;
+ __be32 vx_vni;
+};
+
struct vxlan_sock;
typedef void (vxlan_rcv_t)(struct vxlan_sock *vh, struct sk_buff *skb, __be32 key);
__be32 src, __be32 dst, __u8 tos, __u8 ttl, __be16 df,
__be16 src_port, __be16 dst_port, __be32 vni, bool xnet);
+static inline bool vxlan_gso_check(struct sk_buff *skb)
+{
+ if ((skb_shinfo(skb)->gso_type & SKB_GSO_UDP_TUNNEL) &&
+ (skb->inner_protocol_type != ENCAP_TYPE_ETHER ||
+ skb->inner_protocol != htons(ETH_P_TEB) ||
+ (skb_inner_mac_header(skb) - skb_transport_header(skb) !=
+ sizeof(struct udphdr) + sizeof(struct vxlanhdr))))
+ return false;
+
+ return true;
+}
+
/* IP header + UDP + VXLAN + Ethernet header */
#define VXLAN_HEADROOM (20 + 8 + 8 + 14)
/* IPv6 header + UDP + VXLAN + Ethernet header */
int fc_eh_device_reset(struct scsi_cmnd *);
int fc_eh_host_reset(struct scsi_cmnd *);
int fc_slave_alloc(struct scsi_device *);
-int fc_change_queue_depth(struct scsi_device *, int qdepth, int reason);
-int fc_change_queue_type(struct scsi_device *, int tag_type);
/*
* ELS/CT interface
/*
* scsi host template
*/
-extern int iscsi_change_queue_depth(struct scsi_device *sdev, int depth,
- int reason);
extern int iscsi_eh_abort(struct scsi_cmnd *sc);
extern int iscsi_eh_recover_target(struct scsi_cmnd *sc);
extern int iscsi_eh_session_reset(struct scsi_cmnd *sc);
struct scsi_core {
struct Scsi_Host *shost;
- struct mutex task_queue_flush;
- spinlock_t task_queue_lock;
- struct list_head task_queue;
- int task_queue_size;
-
- struct task_struct *queue_thread;
};
struct sas_ha_event {
struct asd_sas_port **sas_port; /* array of valid pointers, must be set */
int num_phys; /* must be set, gt 0, static */
- /* The class calls this to send a task for execution. */
- int lldd_max_execute_num;
- int lldd_queue_size;
int strict_wide_ports; /* both sas_addr and attached_sas_addr must match
* their siblings when forming wide ports */
struct sas_task {
struct domain_device *dev;
- struct list_head list;
spinlock_t task_state_lock;
unsigned task_state_flags;
int (*lldd_dev_found)(struct domain_device *);
void (*lldd_dev_gone)(struct domain_device *);
- int (*lldd_execute_task)(struct sas_task *, int num,
- gfp_t gfp_flags);
+ int (*lldd_execute_task)(struct sas_task *, gfp_t gfp_flags);
/* Task Management Functions. Must be called from process context. */
int (*lldd_abort_task)(struct sas_task *);
int sas_set_phy_speed(struct sas_phy *phy,
struct sas_phy_linkrates *rates);
int sas_phy_reset(struct sas_phy *phy, int hard_reset);
-int sas_queue_up(struct sas_task *task);
extern int sas_queuecommand(struct Scsi_Host * ,struct scsi_cmnd *);
extern int sas_target_alloc(struct scsi_target *);
extern int sas_slave_configure(struct scsi_device *);
-extern int sas_change_queue_depth(struct scsi_device *, int new_depth,
- int reason);
+extern int sas_change_queue_depth(struct scsi_device *, int new_depth);
extern int sas_change_queue_type(struct scsi_device *, int qt);
extern int sas_bios_param(struct scsi_device *,
struct block_device *,
* Copyright (C) 2008 Panasas Inc. All rights reserved.
*
* Authors:
- * Boaz Harrosh <bharrosh@panasas.com>
+ * Boaz Harrosh <ooo@electrozaur.com>
* Benny Halevy <bhalevy@panasas.com>
*
* This program is free software; you can redistribute it and/or modify
/*
* Copyright (C) 2011
- * Boaz Harrosh <bharrosh@panasas.com>
+ * Boaz Harrosh <ooo@electrozaur.com>
*
* Public Declarations of the ORE API
*
* Copyright (C) 2008 Panasas Inc. All rights reserved.
*
* Authors:
- * Boaz Harrosh <bharrosh@panasas.com>
+ * Boaz Harrosh <ooo@electrozaur.com>
* Benny Halevy <bhalevy@panasas.com>
*
* This program is free software; you can redistribute it and/or modify
*/
struct osd_key_identifier {
- u8 id[7]; /* if you know why 7 please email bharrosh@panasas.com */
+ u8 id[7]; /* if you know why 7 please email ooo@electrozaur.com */
} __packed;
/* for osd_capability.format */
* Copyright (C) 2008 Panasas Inc. All rights reserved.
*
* Authors:
- * Boaz Harrosh <bharrosh@panasas.com>
+ * Boaz Harrosh <ooo@electrozaur.com>
* Benny Halevy <bhalevy@panasas.com>
*
* This program is free software; you can redistribute it and/or modify
* Copyright (C) 2008 Panasas Inc. All rights reserved.
*
* Authors:
- * Boaz Harrosh <bharrosh@panasas.com>
+ * Boaz Harrosh <ooo@electrozaur.com>
* Benny Halevy <bhalevy@panasas.com>
*
* This program is free software; you can redistribute it and/or modify
* Copyright (C) 2008 Panasas Inc. All rights reserved.
*
* Authors:
- * Boaz Harrosh <bharrosh@panasas.com>
+ * Boaz Harrosh <ooo@electrozaur.com>
* Benny Halevy <bhalevy@panasas.com>
*
* This program is free software; you can redistribute it and/or modify
#define MOVE_MEDIUM 0xa5
#define EXCHANGE_MEDIUM 0xa6
#define READ_12 0xa8
+#define SERVICE_ACTION_OUT_12 0xa9
#define WRITE_12 0xaa
-#define READ_MEDIA_SERIAL_NUMBER 0xab
+#define READ_MEDIA_SERIAL_NUMBER 0xab /* Obsolete with SPC-2 */
+#define SERVICE_ACTION_IN_12 0xab
#define WRITE_VERIFY_12 0xae
#define VERIFY_12 0xaf
#define SEARCH_HIGH_12 0xb0
#define VERIFY_16 0x8f
#define SYNCHRONIZE_CACHE_16 0x91
#define WRITE_SAME_16 0x93
-#define SERVICE_ACTION_IN 0x9e
+#define SERVICE_ACTION_BIDIRECTIONAL 0x9d
+#define SERVICE_ACTION_IN_16 0x9e
+#define SERVICE_ACTION_OUT_16 0x9f
/* values for service action in */
#define SAI_READ_CAPACITY_16 0x10
#define SAI_GET_LBA_STATUS 0x12
#define MI_REPORT_ALIASES 0x0b
#define MI_REPORT_SUPPORTED_OPERATION_CODES 0x0c
#define MI_REPORT_SUPPORTED_TASK_MANAGEMENT_FUNCTIONS 0x0d
-#define MI_REPORT_PRIORITY 0x0e
-#define MI_REPORT_TIMESTAMP 0x0f
+#define MI_REPORT_PRIORITY 0x0e
+#define MI_REPORT_TIMESTAMP 0x0f
#define MI_MANAGEMENT_PROTOCOL_IN 0x10
/* value for MI_REPORT_TARGET_PGS ext header */
#define MI_EXT_HDR_PARAM_FMT 0x20
volatile int phase;
};
+/* for scmd->flags */
+#define SCMD_TAGGED (1 << 0)
+
struct scsi_cmnd {
struct scsi_device *device;
struct list_head list; /* scsi_cmnd participates in queue lists */
* to be at an address < 16Mb). */
int result; /* Status code from lower level driver */
+ int flags; /* Command flags */
unsigned char tag; /* SCSI-II queued command tag */
};
size_t *offset, size_t *len);
extern void scsi_kunmap_atomic_sg(void *virt);
-extern int scsi_init_io(struct scsi_cmnd *cmd, gfp_t gfp_mask);
+extern int scsi_init_io(struct scsi_cmnd *cmd);
extern int scsi_dma_map(struct scsi_cmnd *cmd);
extern void scsi_dma_unmap(struct scsi_cmnd *cmd);
#define _SCSI_SCSI_DBG_H
struct scsi_cmnd;
+struct scsi_device;
struct scsi_sense_hdr;
extern void scsi_print_command(struct scsi_cmnd *);
-extern void __scsi_print_command(unsigned char *);
-extern void scsi_show_extd_sense(unsigned char, unsigned char);
-extern void scsi_show_sense_hdr(struct scsi_sense_hdr *);
-extern void scsi_print_sense_hdr(const char *, struct scsi_sense_hdr *);
-extern void scsi_cmd_print_sense_hdr(struct scsi_cmnd *, const char *,
- struct scsi_sense_hdr *);
-extern void scsi_print_sense(char *, struct scsi_cmnd *);
-extern void __scsi_print_sense(const char *name,
+extern void __scsi_print_command(const unsigned char *, size_t);
+extern void scsi_show_extd_sense(const struct scsi_device *, const char *,
+ unsigned char, unsigned char);
+extern void scsi_show_sense_hdr(const struct scsi_device *, const char *,
+ const struct scsi_sense_hdr *);
+extern void scsi_print_sense_hdr(const struct scsi_device *, const char *,
+ const struct scsi_sense_hdr *);
+extern void scsi_print_sense(const struct scsi_cmnd *);
+extern void __scsi_print_sense(const struct scsi_device *, const char *name,
const unsigned char *sense_buffer,
int sense_len);
-extern void scsi_show_result(int);
-extern void scsi_print_result(struct scsi_cmnd *);
-extern void scsi_print_status(unsigned char);
+extern void scsi_print_result(struct scsi_cmnd *, const char *, int);
+extern const char *scsi_hostbyte_string(int);
+extern const char *scsi_driverbyte_string(int);
+extern const char *scsi_mlreturn_string(int);
extern const char *scsi_sense_key_string(unsigned char);
-extern const char *scsi_extd_sense_format(unsigned char, unsigned char);
+extern const char *scsi_extd_sense_format(unsigned char, unsigned char,
+ const char **);
#endif /* _SCSI_SCSI_DBG_H */
unsigned ppr:1; /* Device supports PPR messages */
unsigned tagged_supported:1; /* Supports SCSI-II tagged queuing */
unsigned simple_tags:1; /* simple queue tag messages are enabled */
- unsigned ordered_tags:1;/* ordered queue tag messages are enabled */
unsigned was_reset:1; /* There was a bus reset on the bus for
* this device */
unsigned expecting_cc_ua:1; /* Expecting a CHECK_CONDITION/UNIT_ATTN
unsigned long sdev_data[0];
} __attribute__((aligned(sizeof(unsigned long))));
-struct scsi_dh_devlist {
- char *vendor;
- char *model;
-};
-
typedef void (*activate_complete)(void *, int);
struct scsi_device_handler {
/* Used by the infrastructure */
/* Filled by the hardware handler */
struct module *module;
const char *name;
- const struct scsi_dh_devlist *devlist;
int (*check_sense)(struct scsi_device *, struct scsi_sense_hdr *);
- int (*attach)(struct scsi_device *);
+ struct scsi_dh_data *(*attach)(struct scsi_device *);
void (*detach)(struct scsi_device *);
int (*activate)(struct scsi_device *, activate_complete, void *);
int (*prep_fn)(struct scsi_device *, struct request *);
struct scsi_device_handler *scsi_dh;
struct scsi_device *sdev;
struct kref kref;
- char buf[0];
};
#define to_scsi_device(d) \
#define sdev_dbg(sdev, fmt, a...) \
dev_dbg(&(sdev)->sdev_gendev, fmt, ##a)
+/*
+ * like scmd_printk, but the device name is passed in
+ * as a string pointer
+ */
+#define sdev_prefix_printk(l, sdev, p, fmt, a...) \
+ (p) ? \
+ sdev_printk(l, sdev, "[%s] " fmt, p, ##a) : \
+ sdev_printk(l, sdev, fmt, ##a)
+
#define scmd_printk(prefix, scmd, fmt, a...) \
(scmd)->request->rq_disk ? \
sdev_printk(prefix, (scmd)->device, "[%s] " fmt, \
#define __shost_for_each_device(sdev, shost) \
list_for_each_entry((sdev), &((shost)->__devices), siblings)
-extern void scsi_adjust_queue_depth(struct scsi_device *, int, int);
+extern int scsi_change_queue_depth(struct scsi_device *, int);
extern int scsi_track_queue_full(struct scsi_device *, int);
extern int scsi_set_medium_removal(struct scsi_device *, char);
struct scsi_device;
struct scsi_driver {
- struct module *owner;
struct device_driver gendrv;
void (*rescan)(struct device *);
u8 additional_length; /* always 0 for fixed sense format */
};
-static inline int scsi_sense_valid(struct scsi_sense_hdr *sshdr)
+static inline bool scsi_sense_valid(const struct scsi_sense_hdr *sshdr)
{
if (!sshdr)
- return 0;
+ return false;
return (sshdr->response_code & 0x70) == 0x70;
}
extern void scsi_report_bus_reset(struct Scsi_Host *, int);
extern void scsi_report_device_reset(struct Scsi_Host *, int, int);
extern int scsi_block_when_processing_errors(struct scsi_device *);
-extern int scsi_normalize_sense(const u8 *sense_buffer, int sb_len,
- struct scsi_sense_hdr *sshdr);
-extern int scsi_command_normalize_sense(struct scsi_cmnd *cmd,
- struct scsi_sense_hdr *sshdr);
+extern bool scsi_normalize_sense(const u8 *sense_buffer, int sb_len,
+ struct scsi_sense_hdr *sshdr);
+extern bool scsi_command_normalize_sense(const struct scsi_cmnd *cmd,
+ struct scsi_sense_hdr *sshdr);
-static inline int scsi_sense_is_deferred(struct scsi_sense_hdr *sshdr)
+static inline bool scsi_sense_is_deferred(const struct scsi_sense_hdr *sshdr)
{
return ((sshdr->response_code >= 0x70) && (sshdr->response_code & 1));
}
extern void scsi_build_sense_buffer(int desc, u8 *buf, u8 key, u8 asc, u8 ascq);
-/*
- * Reset request from external source
- */
-#define SCSI_TRY_RESET_DEVICE 1
-#define SCSI_TRY_RESET_BUS 2
-#define SCSI_TRY_RESET_HOST 3
-#define SCSI_TRY_RESET_TARGET 4
-
-extern int scsi_reset_provider(struct scsi_device *, int);
+extern int scsi_ioctl_reset(struct scsi_device *, int __user *);
struct scsi_eh_save {
/* saved state */
#define DISABLE_CLUSTERING 0
#define ENABLE_CLUSTERING 1
-enum {
- SCSI_QDEPTH_DEFAULT, /* default requested change, e.g. from sysfs */
- SCSI_QDEPTH_QFULL, /* scsi-ml requested due to queue full */
- SCSI_QDEPTH_RAMP_UP, /* scsi-ml requested due to threshold event */
-};
-
struct scsi_host_template {
struct module *module;
const char *name;
* Things currently recommended to be handled at this time include:
*
* 1. Setting the device queue depth. Proper setting of this is
- * described in the comments for scsi_adjust_queue_depth.
+ * described in the comments for scsi_change_queue_depth.
* 2. Determining if the device supports the various synchronous
* negotiation protocols. The device struct will already have
* responded to INQUIRY and the results of the standard items
*
* Status: OPTIONAL
*/
- int (* change_queue_depth)(struct scsi_device *, int, int);
+ int (* change_queue_depth)(struct scsi_device *, int);
/*
* Fill in this function to allow the changing of tag types
*/
unsigned char present;
+ /*
+ * Let the block layer assigns tags to all commands.
+ */
+ unsigned use_blk_tags:1;
+
+ /*
+ * Track QUEUE_FULL events and reduce queue depth on demand.
+ */
+ unsigned track_queue_depth:1;
+
/*
* This specifies the mode that a LLD supports.
*/
*/
unsigned skip_settle_delay:1;
- /*
- * True if we are using ordered write support.
- */
- unsigned ordered_tag:1;
-
/* True if the controller does not support WRITE SAME */
unsigned no_write_same:1;
short unsigned int sg_prot_tablesize;
unsigned int max_sectors;
unsigned long dma_boundary;
+ /*
+ * In scsi-mq mode, the number of hardware queues supported by the LLD.
+ *
+ * Note: it is assumed that each hardware queue has a queue depth of
+ * can_queue. In other words, the total queue depth per host
+ * is nr_hw_queues * can_queue.
+ */
+ unsigned nr_hw_queues;
/*
* Used to assign serial numbers to the cmds.
* Protected by the host lock.
unsigned active_mode:2;
unsigned unchecked_isa_dma:1;
unsigned use_clustering:1;
- unsigned use_blk_tcq:1;
/*
* Host has requested that no further requests come through for the
*/
unsigned reverse_ordering:1;
- /*
- * Ordered write support
- */
- unsigned ordered_tag:1;
-
/* Task mgmt function in progress */
unsigned tmf_in_progress:1;
unsigned char host_wwn[8]; // include NULL term.
} Scsi_FCTargAddress;
+int scsi_ioctl_block_when_processing_errors(struct scsi_device *sdev,
+ int cmd, bool ndelay);
extern int scsi_ioctl(struct scsi_device *, int, void __user *);
-extern int scsi_nonblockable_ioctl(struct scsi_device *sdev, int cmd,
- void __user *arg, int ndelay);
#endif /* __KERNEL__ */
#endif /* _SCSI_IOCTL_H */
#ifdef CONFIG_BLOCK
+int scsi_change_queue_type(struct scsi_device *sdev, int tag_type);
+
/**
* scsi_get_tag_type - get the type of tag the device supports
* @sdev: the scsi device
- *
- * Notes:
- * If the drive only supports simple tags, returns MSG_SIMPLE_TAG
- * if it supports all tag types, returns MSG_ORDERED_TAG.
*/
static inline int scsi_get_tag_type(struct scsi_device *sdev)
{
if (!sdev->tagged_supported)
return 0;
- if (sdev->ordered_tags)
- return MSG_ORDERED_TAG;
if (sdev->simple_tags)
return MSG_SIMPLE_TAG;
return 0;
{
switch (tag) {
case MSG_ORDERED_TAG:
- sdev->ordered_tags = 1;
- /* fall through */
case MSG_SIMPLE_TAG:
sdev->simple_tags = 1;
break;
case 0:
/* fall through */
default:
- sdev->ordered_tags = 0;
sdev->simple_tags = 0;
break;
}
}
-/**
- * scsi_activate_tcq - turn on tag command queueing
- * @SDpnt: device to turn on TCQ for
- * @depth: queue depth
- *
- * Notes:
- * Eventually, I hope depth would be the maximum depth
- * the device could cope with and the real queue depth
- * would be adjustable from 0 to depth.
- **/
-static inline void scsi_activate_tcq(struct scsi_device *sdev, int depth)
-{
- if (!sdev->tagged_supported)
- return;
-
- if (!shost_use_blk_mq(sdev->host) &&
- !blk_queue_tagged(sdev->request_queue))
- blk_queue_init_tags(sdev->request_queue, depth,
- sdev->host->bqt);
-
- scsi_adjust_queue_depth(sdev, scsi_get_tag_type(sdev), depth);
-}
-
-/**
- * scsi_deactivate_tcq - turn off tag command queueing
- * @SDpnt: device to turn off TCQ for
- **/
-static inline void scsi_deactivate_tcq(struct scsi_device *sdev, int depth)
-{
- if (!shost_use_blk_mq(sdev->host) &&
- blk_queue_tagged(sdev->request_queue))
- blk_queue_free_tags(sdev->request_queue);
- scsi_adjust_queue_depth(sdev, 0, depth);
-}
-
-/**
- * scsi_populate_tag_msg - place a tag message in a buffer
- * @SCpnt: pointer to the Scsi_Cmnd for the tag
- * @msg: pointer to the area to place the tag
- *
- * Notes:
- * designed to create the correct type of tag message for the
- * particular request. Returns the size of the tag message.
- * May return 0 if TCQ is disabled for this device.
- **/
-static inline int scsi_populate_tag_msg(struct scsi_cmnd *cmd, char *msg)
-{
- struct request *req = cmd->request;
-
- if (blk_rq_tagged(req)) {
- *msg++ = MSG_SIMPLE_TAG;
- *msg++ = req->tag;
- return 2;
- }
-
- return 0;
-}
static inline struct scsi_cmnd *scsi_mq_find_tag(struct Scsi_Host *shost,
- unsigned int hw_ctx, int tag)
+ int unique_tag)
{
- struct request *req;
+ u16 hwq = blk_mq_unique_tag_to_hwq(unique_tag);
+ struct request *req = NULL;
- req = blk_mq_tag_to_rq(shost->tag_set.tags[hw_ctx], tag);
+ if (hwq < shost->tag_set.nr_hw_queues)
+ req = blk_mq_tag_to_rq(shost->tag_set.tags[hwq],
+ blk_mq_unique_tag_to_tag(unique_tag));
return req ? (struct scsi_cmnd *)req->special : NULL;
}
/**
* scsi_find_tag - find a tagged command by device
* @SDpnt: pointer to the ScSI device
- * @tag: the tag number
+ * @tag: tag generated by blk_mq_unique_tag()
*
* Notes:
* Only works with tags allocated by the generic blk layer.
if (tag != SCSI_NO_TAG) {
if (shost_use_blk_mq(sdev->host))
- return scsi_mq_find_tag(sdev->host, 0, tag);
+ return scsi_mq_find_tag(sdev->host, tag);
- req = blk_queue_find_tag(sdev->request_queue, tag);
+ req = blk_queue_find_tag(sdev->request_queue, tag);
return req ? (struct scsi_cmnd *)req->special : NULL;
}
/**
* scsi_host_find_tag - find the tagged command by host
* @shost: pointer to scsi_host
- * @tag: tag of the scsi_cmnd
+ * @tag: tag generated by blk_mq_unique_tag()
*
* Notes:
* Only works with tags allocated by the generic blk layer.
if (tag != SCSI_NO_TAG) {
if (shost_use_blk_mq(shost))
- return scsi_mq_find_tag(shost, 0, tag);
+ return scsi_mq_find_tag(shost, tag);
req = blk_map_queue_find_tag(shost->bqt, tag);
return req ? (struct scsi_cmnd *)req->special : NULL;
}
int spi_populate_sync_msg(unsigned char *msg, int period, int offset);
int spi_populate_ppr_msg(unsigned char *msg, int period, int offset, int width,
int options);
+int spi_populate_tag_msg(unsigned char *msg, struct scsi_cmnd *cmd);
#endif /* SCSI_TRANSPORT_SPI_H */
/* Returns -EBUSY if occupied. 3rd argument pointer to int (see next) */
#define SG_SCSI_RESET 0x2284
-/* Associated values that can be given to SG_SCSI_RESET follow */
+/* Associated values that can be given to SG_SCSI_RESET follow.
+ * SG_SCSI_RESET_NO_ESCALATE may be OR-ed to the _DEVICE, _TARGET, _BUS
+ * or _HOST reset value so only that action is attempted. */
#define SG_SCSI_RESET_NOTHING 0
#define SG_SCSI_RESET_DEVICE 1
#define SG_SCSI_RESET_BUS 2
#define SG_SCSI_RESET_HOST 3
#define SG_SCSI_RESET_TARGET 4
+#define SG_SCSI_RESET_NO_ESCALATE 0x100
/* synchronous SCSI command ioctl, (only in version 3 interface) */
#define SG_IO 0x2285 /* similar effect as write() followed by read() */
--- /dev/null
+/*
+ * arch/arm/mach-at91/include/mach/at91rm9200_sdramc.h
+ *
+ * Copyright (C) 2005 Ivan Kokshaysky
+ * Copyright (C) SAN People
+ *
+ * Memory Controllers (SDRAMC only) - System peripherals registers.
+ * Based on AT91RM9200 datasheet revision E.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91RM9200_SDRAMC_H
+#define AT91RM9200_SDRAMC_H
+
+/* SDRAM Controller registers */
+#define AT91RM9200_SDRAMC_MR 0x90 /* Mode Register */
+#define AT91RM9200_SDRAMC_MODE (0xf << 0) /* Command Mode */
+#define AT91RM9200_SDRAMC_MODE_NORMAL (0 << 0)
+#define AT91RM9200_SDRAMC_MODE_NOP (1 << 0)
+#define AT91RM9200_SDRAMC_MODE_PRECHARGE (2 << 0)
+#define AT91RM9200_SDRAMC_MODE_LMR (3 << 0)
+#define AT91RM9200_SDRAMC_MODE_REFRESH (4 << 0)
+#define AT91RM9200_SDRAMC_DBW (1 << 4) /* Data Bus Width */
+#define AT91RM9200_SDRAMC_DBW_32 (0 << 4)
+#define AT91RM9200_SDRAMC_DBW_16 (1 << 4)
+
+#define AT91RM9200_SDRAMC_TR 0x94 /* Refresh Timer Register */
+#define AT91RM9200_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Count */
+
+#define AT91RM9200_SDRAMC_CR 0x98 /* Configuration Register */
+#define AT91RM9200_SDRAMC_NC (3 << 0) /* Number of Column Bits */
+#define AT91RM9200_SDRAMC_NC_8 (0 << 0)
+#define AT91RM9200_SDRAMC_NC_9 (1 << 0)
+#define AT91RM9200_SDRAMC_NC_10 (2 << 0)
+#define AT91RM9200_SDRAMC_NC_11 (3 << 0)
+#define AT91RM9200_SDRAMC_NR (3 << 2) /* Number of Row Bits */
+#define AT91RM9200_SDRAMC_NR_11 (0 << 2)
+#define AT91RM9200_SDRAMC_NR_12 (1 << 2)
+#define AT91RM9200_SDRAMC_NR_13 (2 << 2)
+#define AT91RM9200_SDRAMC_NB (1 << 4) /* Number of Banks */
+#define AT91RM9200_SDRAMC_NB_2 (0 << 4)
+#define AT91RM9200_SDRAMC_NB_4 (1 << 4)
+#define AT91RM9200_SDRAMC_CAS (3 << 5) /* CAS Latency */
+#define AT91RM9200_SDRAMC_CAS_2 (2 << 5)
+#define AT91RM9200_SDRAMC_TWR (0xf << 7) /* Write Recovery Delay */
+#define AT91RM9200_SDRAMC_TRC (0xf << 11) /* Row Cycle Delay */
+#define AT91RM9200_SDRAMC_TRP (0xf << 15) /* Row Precharge Delay */
+#define AT91RM9200_SDRAMC_TRCD (0xf << 19) /* Row to Column Delay */
+#define AT91RM9200_SDRAMC_TRAS (0xf << 23) /* Active to Precharge Delay */
+#define AT91RM9200_SDRAMC_TXSR (0xf << 27) /* Exit Self Refresh to Active Delay */
+
+#define AT91RM9200_SDRAMC_SRR 0x9c /* Self Refresh Register */
+#define AT91RM9200_SDRAMC_LPR 0xa0 /* Low Power Register */
+#define AT91RM9200_SDRAMC_IER 0xa4 /* Interrupt Enable Register */
+#define AT91RM9200_SDRAMC_IDR 0xa8 /* Interrupt Disable Register */
+#define AT91RM9200_SDRAMC_IMR 0xac /* Interrupt Mask Register */
+#define AT91RM9200_SDRAMC_ISR 0xb0 /* Interrupt Status Register */
+
+#endif
--- /dev/null
+/*
+ * Header file for the Atmel DDR/SDR SDRAM Controller
+ *
+ * Copyright (C) 2010 Atmel Corporation
+ * Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT91SAM9_DDRSDR_H
+#define AT91SAM9_DDRSDR_H
+
+#define AT91_DDRSDRC_MR 0x00 /* Mode Register */
+#define AT91_DDRSDRC_MODE (0x7 << 0) /* Command Mode */
+#define AT91_DDRSDRC_MODE_NORMAL 0
+#define AT91_DDRSDRC_MODE_NOP 1
+#define AT91_DDRSDRC_MODE_PRECHARGE 2
+#define AT91_DDRSDRC_MODE_LMR 3
+#define AT91_DDRSDRC_MODE_REFRESH 4
+#define AT91_DDRSDRC_MODE_EXT_LMR 5
+#define AT91_DDRSDRC_MODE_DEEP 6
+
+#define AT91_DDRSDRC_RTR 0x04 /* Refresh Timer Register */
+#define AT91_DDRSDRC_COUNT (0xfff << 0) /* Refresh Timer Counter */
+
+#define AT91_DDRSDRC_CR 0x08 /* Configuration Register */
+#define AT91_DDRSDRC_NC (3 << 0) /* Number of Column Bits */
+#define AT91_DDRSDRC_NC_SDR8 (0 << 0)
+#define AT91_DDRSDRC_NC_SDR9 (1 << 0)
+#define AT91_DDRSDRC_NC_SDR10 (2 << 0)
+#define AT91_DDRSDRC_NC_SDR11 (3 << 0)
+#define AT91_DDRSDRC_NC_DDR9 (0 << 0)
+#define AT91_DDRSDRC_NC_DDR10 (1 << 0)
+#define AT91_DDRSDRC_NC_DDR11 (2 << 0)
+#define AT91_DDRSDRC_NC_DDR12 (3 << 0)
+#define AT91_DDRSDRC_NR (3 << 2) /* Number of Row Bits */
+#define AT91_DDRSDRC_NR_11 (0 << 2)
+#define AT91_DDRSDRC_NR_12 (1 << 2)
+#define AT91_DDRSDRC_NR_13 (2 << 2)
+#define AT91_DDRSDRC_NR_14 (3 << 2)
+#define AT91_DDRSDRC_CAS (7 << 4) /* CAS Latency */
+#define AT91_DDRSDRC_CAS_2 (2 << 4)
+#define AT91_DDRSDRC_CAS_3 (3 << 4)
+#define AT91_DDRSDRC_CAS_25 (6 << 4)
+#define AT91_DDRSDRC_RST_DLL (1 << 7) /* Reset DLL */
+#define AT91_DDRSDRC_DICDS (1 << 8) /* Output impedance control */
+#define AT91_DDRSDRC_DIS_DLL (1 << 9) /* Disable DLL [SAM9 Only] */
+#define AT91_DDRSDRC_OCD (1 << 12) /* Off-Chip Driver [SAM9 Only] */
+#define AT91_DDRSDRC_DQMS (1 << 16) /* Mask Data is Shared [SAM9 Only] */
+#define AT91_DDRSDRC_ACTBST (1 << 18) /* Active Bank X to Burst Stop Read Access Bank Y [SAM9 Only] */
+
+#define AT91_DDRSDRC_T0PR 0x0C /* Timing 0 Register */
+#define AT91_DDRSDRC_TRAS (0xf << 0) /* Active to Precharge delay */
+#define AT91_DDRSDRC_TRCD (0xf << 4) /* Row to Column delay */
+#define AT91_DDRSDRC_TWR (0xf << 8) /* Write recovery delay */
+#define AT91_DDRSDRC_TRC (0xf << 12) /* Row cycle delay */
+#define AT91_DDRSDRC_TRP (0xf << 16) /* Row precharge delay */
+#define AT91_DDRSDRC_TRRD (0xf << 20) /* Active BankA to BankB */
+#define AT91_DDRSDRC_TWTR (0x7 << 24) /* Internal Write to Read delay */
+#define AT91_DDRSDRC_RED_WRRD (0x1 << 27) /* Reduce Write to Read Delay [SAM9 Only] */
+#define AT91_DDRSDRC_TMRD (0xf << 28) /* Load mode to active/refresh delay */
+
+#define AT91_DDRSDRC_T1PR 0x10 /* Timing 1 Register */
+#define AT91_DDRSDRC_TRFC (0x1f << 0) /* Row Cycle Delay */
+#define AT91_DDRSDRC_TXSNR (0xff << 8) /* Exit self-refresh to non-read */
+#define AT91_DDRSDRC_TXSRD (0xff << 16) /* Exit self-refresh to read */
+#define AT91_DDRSDRC_TXP (0xf << 24) /* Exit power-down delay */
+
+#define AT91_DDRSDRC_T2PR 0x14 /* Timing 2 Register [SAM9 Only] */
+#define AT91_DDRSDRC_TXARD (0xf << 0) /* Exit active power down delay to read command in mode "Fast Exit" */
+#define AT91_DDRSDRC_TXARDS (0xf << 4) /* Exit active power down delay to read command in mode "Slow Exit" */
+#define AT91_DDRSDRC_TRPA (0xf << 8) /* Row Precharge All delay */
+#define AT91_DDRSDRC_TRTP (0x7 << 12) /* Read to Precharge delay */
+
+#define AT91_DDRSDRC_LPR 0x1C /* Low Power Register */
+#define AT91_DDRSDRC_LPCB (3 << 0) /* Low-power Configurations */
+#define AT91_DDRSDRC_LPCB_DISABLE 0
+#define AT91_DDRSDRC_LPCB_SELF_REFRESH 1
+#define AT91_DDRSDRC_LPCB_POWER_DOWN 2
+#define AT91_DDRSDRC_LPCB_DEEP_POWER_DOWN 3
+#define AT91_DDRSDRC_CLKFR (1 << 2) /* Clock Frozen */
+#define AT91_DDRSDRC_PASR (7 << 4) /* Partial Array Self Refresh */
+#define AT91_DDRSDRC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
+#define AT91_DDRSDRC_DS (3 << 10) /* Drive Strength */
+#define AT91_DDRSDRC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
+#define AT91_DDRSDRC_TIMEOUT_0_CLK_CYCLES (0 << 12)
+#define AT91_DDRSDRC_TIMEOUT_64_CLK_CYCLES (1 << 12)
+#define AT91_DDRSDRC_TIMEOUT_128_CLK_CYCLES (2 << 12)
+#define AT91_DDRSDRC_APDE (1 << 16) /* Active power down exit time */
+#define AT91_DDRSDRC_UPD_MR (3 << 20) /* Update load mode register and extended mode register */
+
+#define AT91_DDRSDRC_MDR 0x20 /* Memory Device Register */
+#define AT91_DDRSDRC_MD (3 << 0) /* Memory Device Type */
+#define AT91_DDRSDRC_MD_SDR 0
+#define AT91_DDRSDRC_MD_LOW_POWER_SDR 1
+#define AT91_DDRSDRC_MD_LOW_POWER_DDR 3
+#define AT91_DDRSDRC_MD_DDR2 6 /* [SAM9 Only] */
+#define AT91_DDRSDRC_DBW (1 << 4) /* Data Bus Width */
+#define AT91_DDRSDRC_DBW_32BITS (0 << 4)
+#define AT91_DDRSDRC_DBW_16BITS (1 << 4)
+
+#define AT91_DDRSDRC_DLL 0x24 /* DLL Information Register */
+#define AT91_DDRSDRC_MDINC (1 << 0) /* Master Delay increment */
+#define AT91_DDRSDRC_MDDEC (1 << 1) /* Master Delay decrement */
+#define AT91_DDRSDRC_MDOVF (1 << 2) /* Master Delay Overflow */
+#define AT91_DDRSDRC_MDVAL (0xff << 8) /* Master Delay value */
+
+#define AT91_DDRSDRC_HS 0x2C /* High Speed Register [SAM9 Only] */
+#define AT91_DDRSDRC_DIS_ATCP_RD (1 << 2) /* Anticip read access is disabled */
+
+#define AT91_DDRSDRC_DELAY(n) (0x30 + (0x4 * (n))) /* Delay I/O Register n */
+
+#define AT91_DDRSDRC_WPMR 0xE4 /* Write Protect Mode Register [SAM9 Only] */
+#define AT91_DDRSDRC_WP (1 << 0) /* Write protect enable */
+#define AT91_DDRSDRC_WPKEY (0xffffff << 8) /* Write protect key */
+#define AT91_DDRSDRC_KEY (0x444452 << 8) /* Write protect key = "DDR" */
+
+#define AT91_DDRSDRC_WPSR 0xE8 /* Write Protect Status Register [SAM9 Only] */
+#define AT91_DDRSDRC_WPVS (1 << 0) /* Write protect violation status */
+#define AT91_DDRSDRC_WPVSRC (0xffff << 8) /* Write protect violation source */
+
+#endif
--- /dev/null
+/*
+ * arch/arm/mach-at91/include/mach/at91sam9_sdramc.h
+ *
+ * Copyright (C) 2007 Andrew Victor
+ * Copyright (C) 2007 Atmel Corporation.
+ *
+ * SDRAM Controllers (SDRAMC) - System peripherals registers.
+ * Based on AT91SAM9261 datasheet revision D.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef AT91SAM9_SDRAMC_H
+#define AT91SAM9_SDRAMC_H
+
+/* SDRAM Controller (SDRAMC) registers */
+#define AT91_SDRAMC_MR 0x00 /* SDRAM Controller Mode Register */
+#define AT91_SDRAMC_MODE (0xf << 0) /* Command Mode */
+#define AT91_SDRAMC_MODE_NORMAL 0
+#define AT91_SDRAMC_MODE_NOP 1
+#define AT91_SDRAMC_MODE_PRECHARGE 2
+#define AT91_SDRAMC_MODE_LMR 3
+#define AT91_SDRAMC_MODE_REFRESH 4
+#define AT91_SDRAMC_MODE_EXT_LMR 5
+#define AT91_SDRAMC_MODE_DEEP 6
+
+#define AT91_SDRAMC_TR 0x04 /* SDRAM Controller Refresh Timer Register */
+#define AT91_SDRAMC_COUNT (0xfff << 0) /* Refresh Timer Counter */
+
+#define AT91_SDRAMC_CR 0x08 /* SDRAM Controller Configuration Register */
+#define AT91_SDRAMC_NC (3 << 0) /* Number of Column Bits */
+#define AT91_SDRAMC_NC_8 (0 << 0)
+#define AT91_SDRAMC_NC_9 (1 << 0)
+#define AT91_SDRAMC_NC_10 (2 << 0)
+#define AT91_SDRAMC_NC_11 (3 << 0)
+#define AT91_SDRAMC_NR (3 << 2) /* Number of Row Bits */
+#define AT91_SDRAMC_NR_11 (0 << 2)
+#define AT91_SDRAMC_NR_12 (1 << 2)
+#define AT91_SDRAMC_NR_13 (2 << 2)
+#define AT91_SDRAMC_NB (1 << 4) /* Number of Banks */
+#define AT91_SDRAMC_NB_2 (0 << 4)
+#define AT91_SDRAMC_NB_4 (1 << 4)
+#define AT91_SDRAMC_CAS (3 << 5) /* CAS Latency */
+#define AT91_SDRAMC_CAS_1 (1 << 5)
+#define AT91_SDRAMC_CAS_2 (2 << 5)
+#define AT91_SDRAMC_CAS_3 (3 << 5)
+#define AT91_SDRAMC_DBW (1 << 7) /* Data Bus Width */
+#define AT91_SDRAMC_DBW_32 (0 << 7)
+#define AT91_SDRAMC_DBW_16 (1 << 7)
+#define AT91_SDRAMC_TWR (0xf << 8) /* Write Recovery Delay */
+#define AT91_SDRAMC_TRC (0xf << 12) /* Row Cycle Delay */
+#define AT91_SDRAMC_TRP (0xf << 16) /* Row Precharge Delay */
+#define AT91_SDRAMC_TRCD (0xf << 20) /* Row to Column Delay */
+#define AT91_SDRAMC_TRAS (0xf << 24) /* Active to Precharge Delay */
+#define AT91_SDRAMC_TXSR (0xf << 28) /* Exit Self Refresh to Active Delay */
+
+#define AT91_SDRAMC_LPR 0x10 /* SDRAM Controller Low Power Register */
+#define AT91_SDRAMC_LPCB (3 << 0) /* Low-power Configurations */
+#define AT91_SDRAMC_LPCB_DISABLE 0
+#define AT91_SDRAMC_LPCB_SELF_REFRESH 1
+#define AT91_SDRAMC_LPCB_POWER_DOWN 2
+#define AT91_SDRAMC_LPCB_DEEP_POWER_DOWN 3
+#define AT91_SDRAMC_PASR (7 << 4) /* Partial Array Self Refresh */
+#define AT91_SDRAMC_TCSR (3 << 8) /* Temperature Compensated Self Refresh */
+#define AT91_SDRAMC_DS (3 << 10) /* Drive Strength */
+#define AT91_SDRAMC_TIMEOUT (3 << 12) /* Time to define when Low Power Mode is enabled */
+#define AT91_SDRAMC_TIMEOUT_0_CLK_CYCLES (0 << 12)
+#define AT91_SDRAMC_TIMEOUT_64_CLK_CYCLES (1 << 12)
+#define AT91_SDRAMC_TIMEOUT_128_CLK_CYCLES (2 << 12)
+
+#define AT91_SDRAMC_IER 0x14 /* SDRAM Controller Interrupt Enable Register */
+#define AT91_SDRAMC_IDR 0x18 /* SDRAM Controller Interrupt Disable Register */
+#define AT91_SDRAMC_IMR 0x1C /* SDRAM Controller Interrupt Mask Register */
+#define AT91_SDRAMC_ISR 0x20 /* SDRAM Controller Interrupt Status Register */
+#define AT91_SDRAMC_RES (1 << 0) /* Refresh Error Status */
+
+#define AT91_SDRAMC_MDR 0x24 /* SDRAM Memory Device Register */
+#define AT91_SDRAMC_MD (3 << 0) /* Memory Device Type */
+#define AT91_SDRAMC_MD_SDRAM 0
+#define AT91_SDRAMC_MD_LOW_POWER_SDRAM 1
+
+#endif
--- /dev/null
+/*
+ * Copyright (C) 2014 NVIDIA Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __SOC_TEGRA_MC_H__
+#define __SOC_TEGRA_MC_H__
+
+#include <linux/types.h>
+
+struct clk;
+struct device;
+struct page;
+
+struct tegra_smmu_enable {
+ unsigned int reg;
+ unsigned int bit;
+};
+
+/* latency allowance */
+struct tegra_mc_la {
+ unsigned int reg;
+ unsigned int shift;
+ unsigned int mask;
+ unsigned int def;
+};
+
+struct tegra_mc_client {
+ unsigned int id;
+ const char *name;
+ unsigned int swgroup;
+
+ unsigned int fifo_size;
+
+ struct tegra_smmu_enable smmu;
+ struct tegra_mc_la la;
+};
+
+struct tegra_smmu_swgroup {
+ unsigned int swgroup;
+ unsigned int reg;
+};
+
+struct tegra_smmu_ops {
+ void (*flush_dcache)(struct page *page, unsigned long offset,
+ size_t size);
+};
+
+struct tegra_smmu_soc {
+ const struct tegra_mc_client *clients;
+ unsigned int num_clients;
+
+ const struct tegra_smmu_swgroup *swgroups;
+ unsigned int num_swgroups;
+
+ bool supports_round_robin_arbitration;
+ bool supports_request_limit;
+
+ unsigned int num_asids;
+
+ const struct tegra_smmu_ops *ops;
+};
+
+struct tegra_mc;
+struct tegra_smmu;
+
+#ifdef CONFIG_TEGRA_IOMMU_SMMU
+struct tegra_smmu *tegra_smmu_probe(struct device *dev,
+ const struct tegra_smmu_soc *soc,
+ struct tegra_mc *mc);
+#else
+static inline struct tegra_smmu *
+tegra_smmu_probe(struct device *dev, const struct tegra_smmu_soc *soc,
+ struct tegra_mc *mc)
+{
+ return NULL;
+}
+#endif
+
+struct tegra_mc_soc {
+ const struct tegra_mc_client *clients;
+ unsigned int num_clients;
+
+ const unsigned int *emem_regs;
+ unsigned int num_emem_regs;
+
+ unsigned int num_address_bits;
+ unsigned int atom_size;
+
+ const struct tegra_smmu_soc *smmu;
+};
+
+struct tegra_mc {
+ struct device *dev;
+ struct tegra_smmu *smmu;
+ void __iomem *regs;
+ struct clk *clk;
+ int irq;
+
+ const struct tegra_mc_soc *soc;
+ unsigned long tick;
+};
+
+#endif /* __SOC_TEGRA_MC_H__ */
#define SNDRV_PCM_FMTBIT_DSD_U8 _SNDRV_PCM_FMTBIT(DSD_U8)
#define SNDRV_PCM_FMTBIT_DSD_U16_LE _SNDRV_PCM_FMTBIT(DSD_U16_LE)
#define SNDRV_PCM_FMTBIT_DSD_U32_LE _SNDRV_PCM_FMTBIT(DSD_U32_LE)
+#define SNDRV_PCM_FMTBIT_DSD_U16_BE _SNDRV_PCM_FMTBIT(DSD_U16_BE)
+#define SNDRV_PCM_FMTBIT_DSD_U32_BE _SNDRV_PCM_FMTBIT(DSD_U32_BE)
#ifdef SNDRV_LITTLE_ENDIAN
#define SNDRV_PCM_FMTBIT_S16 SNDRV_PCM_FMTBIT_S16_LE
/* state and update */
enum snd_soc_dpcm_update runtime_update;
enum snd_soc_dpcm_state state;
+
+ int trigger_pending; /* trigger cmd + 1 if pending, 0 if not */
};
/* can this BE stop and free */
#define DA_EMULATE_ALUA 0
/* Enforce SCSI Initiator Port TransportID with 'ISID' for PR */
#define DA_ENFORCE_PR_ISIDS 1
+/* Force SPC-3 PR Activate Persistence across Target Power Loss */
+#define DA_FORCE_PR_APTPL 0
#define DA_STATUS_MAX_SECTORS_MIN 16
#define DA_STATUS_MAX_SECTORS_MAX 8192
/* By default don't report non-rotating (solid state) medium */
enum target_prot_type pi_prot_type;
enum target_prot_type hw_pi_prot_type;
int enforce_pr_isids;
+ int force_pr_aptpl;
int is_nonrot;
int emulate_rest_reord;
u32 hw_block_size;
struct config_group fabric_stat_group;
};
+static inline void atomic_inc_mb(atomic_t *v)
+{
+ smp_mb__before_atomic();
+ atomic_inc(v);
+ smp_mb__after_atomic();
+}
+
+static inline void atomic_dec_mb(atomic_t *v)
+{
+ smp_mb__before_atomic();
+ atomic_dec(v);
+ smp_mb__after_atomic();
+}
+
#endif /* TARGET_CORE_BASE_H */
show_extent_status(__entry->found ? __entry->status : 0))
);
-TRACE_EVENT(ext4_es_shrink_enter,
+DECLARE_EVENT_CLASS(ext4__es_shrink_enter,
TP_PROTO(struct super_block *sb, int nr_to_scan, int cache_cnt),
TP_ARGS(sb, nr_to_scan, cache_cnt),
__entry->nr_to_scan, __entry->cache_cnt)
);
-TRACE_EVENT(ext4_es_shrink_exit,
- TP_PROTO(struct super_block *sb, int shrunk_nr, int cache_cnt),
+DEFINE_EVENT(ext4__es_shrink_enter, ext4_es_shrink_count,
+ TP_PROTO(struct super_block *sb, int nr_to_scan, int cache_cnt),
- TP_ARGS(sb, shrunk_nr, cache_cnt),
+ TP_ARGS(sb, nr_to_scan, cache_cnt)
+);
+
+DEFINE_EVENT(ext4__es_shrink_enter, ext4_es_shrink_scan_enter,
+ TP_PROTO(struct super_block *sb, int nr_to_scan, int cache_cnt),
+
+ TP_ARGS(sb, nr_to_scan, cache_cnt)
+);
+
+TRACE_EVENT(ext4_es_shrink_scan_exit,
+ TP_PROTO(struct super_block *sb, int nr_shrunk, int cache_cnt),
+
+ TP_ARGS(sb, nr_shrunk, cache_cnt),
TP_STRUCT__entry(
__field( dev_t, dev )
- __field( int, shrunk_nr )
+ __field( int, nr_shrunk )
__field( int, cache_cnt )
),
TP_fast_assign(
__entry->dev = sb->s_dev;
- __entry->shrunk_nr = shrunk_nr;
+ __entry->nr_shrunk = nr_shrunk;
__entry->cache_cnt = cache_cnt;
),
- TP_printk("dev %d,%d shrunk_nr %d cache_cnt %d",
+ TP_printk("dev %d,%d nr_shrunk %d cache_cnt %d",
MAJOR(__entry->dev), MINOR(__entry->dev),
- __entry->shrunk_nr, __entry->cache_cnt)
+ __entry->nr_shrunk, __entry->cache_cnt)
);
TRACE_EVENT(ext4_collapse_range,
__entry->offset, __entry->len)
);
+TRACE_EVENT(ext4_es_shrink,
+ TP_PROTO(struct super_block *sb, int nr_shrunk, u64 scan_time,
+ int skip_precached, int nr_skipped, int retried),
+
+ TP_ARGS(sb, nr_shrunk, scan_time, skip_precached, nr_skipped, retried),
+
+ TP_STRUCT__entry(
+ __field( dev_t, dev )
+ __field( int, nr_shrunk )
+ __field( unsigned long long, scan_time )
+ __field( int, skip_precached )
+ __field( int, nr_skipped )
+ __field( int, retried )
+ ),
+
+ TP_fast_assign(
+ __entry->dev = sb->s_dev;
+ __entry->nr_shrunk = nr_shrunk;
+ __entry->scan_time = div_u64(scan_time, 1000);
+ __entry->skip_precached = skip_precached;
+ __entry->nr_skipped = nr_skipped;
+ __entry->retried = retried;
+ ),
+
+ TP_printk("dev %d,%d nr_shrunk %d, scan_time %llu skip_precached %d "
+ "nr_skipped %d retried %d",
+ MAJOR(__entry->dev), MINOR(__entry->dev), __entry->nr_shrunk,
+ __entry->scan_time, __entry->skip_precached,
+ __entry->nr_skipped, __entry->retried)
+);
+
#endif /* _TRACE_EXT4_H */
/* This part must be outside protection */
#ifdef CONFIG_RCU_TRACE
-#if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU)
+#if defined(CONFIG_TREE_RCU) || defined(CONFIG_PREEMPT_RCU)
/*
* Tracepoint for grace-period events. Takes a string identifying the
__entry->cpu, __entry->qsevent)
);
-#endif /* #if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU) */
+#endif /* #if defined(CONFIG_TREE_RCU) || defined(CONFIG_PREEMPT_RCU) */
/*
* Tracepoint for dyntick-idle entry/exit events. These take a string
/*
* Tracepoint for _rcu_barrier() execution. The string "s" describes
* the _rcu_barrier phase:
- * "Begin": rcu_barrier_callback() started.
- * "Check": rcu_barrier_callback() checking for piggybacking.
- * "EarlyExit": rcu_barrier_callback() piggybacked, thus early exit.
- * "Inc1": rcu_barrier_callback() piggyback check counter incremented.
- * "Offline": rcu_barrier_callback() found offline CPU
- * "OnlineNoCB": rcu_barrier_callback() found online no-CBs CPU.
- * "OnlineQ": rcu_barrier_callback() found online CPU with callbacks.
- * "OnlineNQ": rcu_barrier_callback() found online CPU, no callbacks.
+ * "Begin": _rcu_barrier() started.
+ * "Check": _rcu_barrier() checking for piggybacking.
+ * "EarlyExit": _rcu_barrier() piggybacked, thus early exit.
+ * "Inc1": _rcu_barrier() piggyback check counter incremented.
+ * "OfflineNoCB": _rcu_barrier() found callback on never-online CPU
+ * "OnlineNoCB": _rcu_barrier() found online no-CBs CPU.
+ * "OnlineQ": _rcu_barrier() found online CPU with callbacks.
+ * "OnlineNQ": _rcu_barrier() found online CPU, no callbacks.
* "IRQ": An rcu_barrier_callback() callback posted on remote CPU.
* "CB": An rcu_barrier_callback() invoked a callback, not the last.
* "LastCB": An rcu_barrier_callback() invoked the last callback.
- * "Inc2": rcu_barrier_callback() piggyback check counter incremented.
+ * "Inc2": _rcu_barrier() piggyback check counter incremented.
* The "cpu" argument is the CPU or -1 if meaningless, the "cnt" argument
* is the count of remaining callbacks, and "done" is the piggybacking count.
*/
long state = p->state;
#ifdef CONFIG_PREEMPT
+#ifdef CONFIG_SCHED_DEBUG
+ BUG_ON(p != current);
+#endif /* CONFIG_SCHED_DEBUG */
/*
* For all intents and purposes a preempted task is a running task.
*/
- if (task_preempt_count(p) & PREEMPT_ACTIVE)
+ if (preempt_count() & PREEMPT_ACTIVE)
state = TASK_RUNNING | TASK_STATE_MAX;
-#endif
+#endif /* CONFIG_PREEMPT */
return state;
}
-#endif
+#endif /* CREATE_TRACE_POINTS */
/*
* Tracepoint for task switches, performed by the scheduler:
scsi_opcode_name(WRITE_16), \
scsi_opcode_name(VERIFY_16), \
scsi_opcode_name(WRITE_SAME_16), \
- scsi_opcode_name(SERVICE_ACTION_IN), \
+ scsi_opcode_name(SERVICE_ACTION_IN_16), \
scsi_opcode_name(SAI_READ_CAPACITY_16), \
scsi_opcode_name(SAI_GET_LBA_STATUS), \
scsi_opcode_name(MI_REPORT_TARGET_PGS), \
scsi_opcode_name(WRITE_16), \
scsi_opcode_name(VERIFY_16), \
scsi_opcode_name(WRITE_SAME_16), \
- scsi_opcode_name(SERVICE_ACTION_IN), \
+ scsi_opcode_name(SERVICE_ACTION_IN_16), \
scsi_opcode_name(SAI_READ_CAPACITY_16), \
scsi_opcode_name(SAI_GET_LBA_STATUS), \
scsi_opcode_name(MI_REPORT_TARGET_PGS), \
--- /dev/null
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM thermal
+
+#if !defined(_TRACE_THERMAL_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_THERMAL_H
+
+#include <linux/thermal.h>
+#include <linux/tracepoint.h>
+
+TRACE_EVENT(thermal_temperature,
+
+ TP_PROTO(struct thermal_zone_device *tz),
+
+ TP_ARGS(tz),
+
+ TP_STRUCT__entry(
+ __string(thermal_zone, tz->type)
+ __field(int, id)
+ __field(int, temp_prev)
+ __field(int, temp)
+ ),
+
+ TP_fast_assign(
+ __assign_str(thermal_zone, tz->type);
+ __entry->id = tz->id;
+ __entry->temp_prev = tz->last_temperature;
+ __entry->temp = tz->temperature;
+ ),
+
+ TP_printk("thermal_zone=%s id=%d temp_prev=%d temp=%d",
+ __get_str(thermal_zone), __entry->id, __entry->temp_prev,
+ __entry->temp)
+);
+
+TRACE_EVENT(cdev_update,
+
+ TP_PROTO(struct thermal_cooling_device *cdev, unsigned long target),
+
+ TP_ARGS(cdev, target),
+
+ TP_STRUCT__entry(
+ __string(type, cdev->type)
+ __field(unsigned long, target)
+ ),
+
+ TP_fast_assign(
+ __assign_str(type, cdev->type);
+ __entry->target = target;
+ ),
+
+ TP_printk("type=%s target=%lu", __get_str(type), __entry->target)
+);
+
+TRACE_EVENT(thermal_zone_trip,
+
+ TP_PROTO(struct thermal_zone_device *tz, int trip,
+ enum thermal_trip_type trip_type),
+
+ TP_ARGS(tz, trip, trip_type),
+
+ TP_STRUCT__entry(
+ __string(thermal_zone, tz->type)
+ __field(int, id)
+ __field(int, trip)
+ __field(enum thermal_trip_type, trip_type)
+ ),
+
+ TP_fast_assign(
+ __assign_str(thermal_zone, tz->type);
+ __entry->id = tz->id;
+ __entry->trip = trip;
+ __entry->trip_type = trip_type;
+ ),
+
+ TP_printk("thermal_zone=%s id=%d trip=%d trip_type=%d",
+ __get_str(thermal_zone), __entry->id, __entry->trip,
+ __entry->trip_type)
+);
+
+#endif /* _TRACE_THERMAL_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
header-y += firewire-cdev.h
header-y += firewire-constants.h
header-y += flat.h
+header-y += fou.h
header-y += fs.h
header-y += fsl_hypervisor.h
header-y += fuse.h
header-y += hiddev.h
header-y += hidraw.h
header-y += hpet.h
+header-y += hsr_netlink.h
header-y += hyperv.h
header-y += hysdn_if.h
header-y += i2c-dev.h
header-y += minix_fs.h
header-y += mman.h
header-y += mmtimer.h
+header-y += mpls.h
header-y += mqueue.h
header-y += mroute.h
header-y += mroute6.h
header-y += synclink.h
header-y += sysctl.h
header-y += sysinfo.h
+header-y += target_core_user.h
header-y += taskstats.h
header-y += tcp.h
header-y += tcp_metrics.h
header-y += virtio_pci.h
header-y += virtio_ring.h
header-y += virtio_rng.h
+header-y += vm_sockets.h
header-y += vt.h
header-y += wait.h
header-y += wanrouter.h
#define DM_DEV_SET_GEOMETRY _IOWR(DM_IOCTL, DM_DEV_SET_GEOMETRY_CMD, struct dm_ioctl)
#define DM_VERSION_MAJOR 4
-#define DM_VERSION_MINOR 28
+#define DM_VERSION_MINOR 29
#define DM_VERSION_PATCHLEVEL 0
-#define DM_VERSION_EXTRA "-ioctl (2014-09-17)"
+#define DM_VERSION_EXTRA "-ioctl (2014-10-28)"
/* Status bits */
#define DM_READONLY_FLAG (1 << 0) /* In/Out */
*/
#define DM_DEFERRED_REMOVE (1 << 17) /* In/Out */
+/*
+ * If set, the device is suspended internally.
+ */
+#define DM_INTERNAL_SUSPEND_FLAG (1 << 18) /* Out */
+
#endif /* _LINUX_DM_IOCTL_H */
#define EM_MN10300 89 /* Panasonic/MEI MN10300, AM33 */
#define EM_OPENRISC 92 /* OpenRISC 32-bit embedded processor */
#define EM_BLACKFIN 106 /* ADI Blackfin Processor */
+#define EM_ALTERA_NIOS2 113 /* Altera Nios II soft-core processor */
#define EM_TI_C6000 140 /* TI C6X DSPs */
#define EM_AARCH64 183 /* ARM 64 bit */
#define EM_FRV 0x5441 /* Fujitsu FR-V */
#define NT_ARM_TLS 0x401 /* ARM TLS register */
#define NT_ARM_HW_BREAK 0x402 /* ARM hardware breakpoint registers */
#define NT_ARM_HW_WATCH 0x403 /* ARM hardware watchpoint registers */
+#define NT_ARM_SYSTEM_CALL 0x404 /* ARM system call number */
#define NT_METAG_CBUF 0x500 /* Metag catch buffer registers */
#define NT_METAG_RPIPE 0x501 /* Metag read pipeline state */
#define NT_METAG_TLS 0x502 /* Metag TLS pointer */
#define RENAME_NOREPLACE (1 << 0) /* Don't overwrite target */
#define RENAME_EXCHANGE (1 << 1) /* Exchange source and dest */
+#define RENAME_WHITEOUT (1 << 2) /* Whiteout source */
struct fstrim_range {
__u64 start;
#include <linux/types.h>
#include <linux/if_ether.h>
+#include <linux/in6.h>
#define SYSFS_BRIDGE_ATTR "bridge"
#define SYSFS_BRIDGE_FDB "brforward"
#define KEY_BRIGHTNESS_MIN 0x250 /* Set Brightness to Minimum */
#define KEY_BRIGHTNESS_MAX 0x251 /* Set Brightness to Maximum */
+#define KEY_KBDINPUTASSIST_PREV 0x260
+#define KEY_KBDINPUTASSIST_NEXT 0x261
+#define KEY_KBDINPUTASSIST_PREVGROUP 0x262
+#define KEY_KBDINPUTASSIST_NEXTGROUP 0x263
+#define KEY_KBDINPUTASSIST_ACCEPT 0x264
+#define KEY_KBDINPUTASSIST_CANCEL 0x265
+
#define BTN_TRIGGER_HAPPY 0x2c0
#define BTN_TRIGGER_HAPPY1 0x2c0
#define BTN_TRIGGER_HAPPY2 0x2c1
PERF_SAMPLE_DATA_SRC = 1U << 15,
PERF_SAMPLE_IDENTIFIER = 1U << 16,
PERF_SAMPLE_TRANSACTION = 1U << 17,
+ PERF_SAMPLE_REGS_INTR = 1U << 18,
- PERF_SAMPLE_MAX = 1U << 18, /* non-ABI */
+ PERF_SAMPLE_MAX = 1U << 19, /* non-ABI */
};
/*
#define PERF_ATTR_SIZE_VER2 80 /* add: branch_sample_type */
#define PERF_ATTR_SIZE_VER3 96 /* add: sample_regs_user */
/* add: sample_stack_user */
+#define PERF_ATTR_SIZE_VER4 104 /* add: sample_regs_intr */
/*
* Hardware event_id to monitor via a performance monitoring event:
/* Align to u64. */
__u32 __reserved_2;
+ /*
+ * Defines set of regs to dump for each sample
+ * state captured on:
+ * - precise = 0: PMU interrupt
+ * - precise > 0: sampled instruction
+ *
+ * See asm/perf_regs.h for details.
+ */
+ __u64 sample_regs_intr;
};
#define perf_flags(attr) (*(&(attr)->read_format + 1))
/*
* Bits needed to read the hw events in user-space.
*
- * u32 seq, time_mult, time_shift, idx, width;
+ * u32 seq, time_mult, time_shift, index, width;
* u64 count, enabled, running;
* u64 cyc, time_offset;
* s64 pmc = 0;
* time_shift = pc->time_shift;
* }
*
- * idx = pc->index;
+ * index = pc->index;
* count = pc->offset;
- * if (pc->cap_usr_rdpmc && idx) {
+ * if (pc->cap_user_rdpmc && index) {
* width = pc->pmc_width;
- * pmc = rdpmc(idx - 1);
+ * pmc = rdpmc(index - 1);
* }
*
* barrier();
};
/*
- * If cap_usr_rdpmc this field provides the bit-width of the value
+ * If cap_user_rdpmc this field provides the bit-width of the value
* read using the rdpmc() or equivalent instruction. This can be used
* to sign extend the result like:
*
*
* Where time_offset,time_mult,time_shift and cyc are read in the
* seqcount loop described above. This delta can then be added to
- * enabled and possible running (if idx), improving the scaling:
+ * enabled and possible running (if index), improving the scaling:
*
* enabled += delta;
- * if (idx)
+ * if (index)
* running += delta;
*
* quot = count / running;
* { u64 weight; } && PERF_SAMPLE_WEIGHT
* { u64 data_src; } && PERF_SAMPLE_DATA_SRC
* { u64 transaction; } && PERF_SAMPLE_TRANSACTION
+ * { u64 abi; # enum perf_sample_regs_abi
+ * u64 regs[weight(mask)]; } && PERF_SAMPLE_REGS_INTR
* };
*/
PERF_RECORD_SAMPLE = 9,
#define CLONE_VFORK 0x00004000 /* set if the parent wants the child to wake it up on mm_release */
#define CLONE_PARENT 0x00008000 /* set if we want to have the same parent as the cloner */
#define CLONE_THREAD 0x00010000 /* Same thread group? */
-#define CLONE_NEWNS 0x00020000 /* New namespace group? */
+#define CLONE_NEWNS 0x00020000 /* New mount namespace group */
#define CLONE_SYSVSEM 0x00040000 /* share system V SEM_UNDO semantics */
#define CLONE_SETTLS 0x00080000 /* create a new TLS for the child */
#define CLONE_PARENT_SETTID 0x00100000 /* set the TID in the parent */
#define CLONE_CHILD_SETTID 0x01000000 /* set the TID in the child */
/* 0x02000000 was previously the unused CLONE_STOPPED (Start in stopped state)
and is now available for re-use. */
-#define CLONE_NEWUTS 0x04000000 /* New utsname group? */
-#define CLONE_NEWIPC 0x08000000 /* New ipcs */
+#define CLONE_NEWUTS 0x04000000 /* New utsname namespace */
+#define CLONE_NEWIPC 0x08000000 /* New ipc namespace */
#define CLONE_NEWUSER 0x10000000 /* New user namespace */
#define CLONE_NEWPID 0x20000000 /* New pid namespace */
#define CLONE_NEWNET 0x40000000 /* New network namespace */
--- /dev/null
+#ifndef __TARGET_CORE_USER_H
+#define __TARGET_CORE_USER_H
+
+/* This header will be used by application too */
+
+#include <linux/types.h>
+#include <linux/uio.h>
+
+#ifndef __packed
+#define __packed __attribute__((packed))
+#endif
+
+#define TCMU_VERSION "1.0"
+
+/*
+ * Ring Design
+ * -----------
+ *
+ * The mmaped area is divided into three parts:
+ * 1) The mailbox (struct tcmu_mailbox, below)
+ * 2) The command ring
+ * 3) Everything beyond the command ring (data)
+ *
+ * The mailbox tells userspace the offset of the command ring from the
+ * start of the shared memory region, and how big the command ring is.
+ *
+ * The kernel passes SCSI commands to userspace by putting a struct
+ * tcmu_cmd_entry in the ring, updating mailbox->cmd_head, and poking
+ * userspace via uio's interrupt mechanism.
+ *
+ * tcmu_cmd_entry contains a header. If the header type is PAD,
+ * userspace should skip hdr->length bytes (mod cmdr_size) to find the
+ * next cmd_entry.
+ *
+ * Otherwise, the entry will contain offsets into the mmaped area that
+ * contain the cdb and data buffers -- the latter accessible via the
+ * iov array. iov addresses are also offsets into the shared area.
+ *
+ * When userspace is completed handling the command, set
+ * entry->rsp.scsi_status, fill in rsp.sense_buffer if appropriate,
+ * and also set mailbox->cmd_tail equal to the old cmd_tail plus
+ * hdr->length, mod cmdr_size. If cmd_tail doesn't equal cmd_head, it
+ * should process the next packet the same way, and so on.
+ */
+
+#define TCMU_MAILBOX_VERSION 1
+#define ALIGN_SIZE 64 /* Should be enough for most CPUs */
+
+struct tcmu_mailbox {
+ __u16 version;
+ __u16 flags;
+ __u32 cmdr_off;
+ __u32 cmdr_size;
+
+ __u32 cmd_head;
+
+ /* Updated by user. On its own cacheline */
+ __u32 cmd_tail __attribute__((__aligned__(ALIGN_SIZE)));
+
+} __packed;
+
+enum tcmu_opcode {
+ TCMU_OP_PAD = 0,
+ TCMU_OP_CMD,
+};
+
+/*
+ * Only a few opcodes, and length is 8-byte aligned, so use low bits for opcode.
+ */
+struct tcmu_cmd_entry_hdr {
+ __u32 len_op;
+} __packed;
+
+#define TCMU_OP_MASK 0x7
+
+static inline enum tcmu_opcode tcmu_hdr_get_op(struct tcmu_cmd_entry_hdr *hdr)
+{
+ return hdr->len_op & TCMU_OP_MASK;
+}
+
+static inline void tcmu_hdr_set_op(struct tcmu_cmd_entry_hdr *hdr, enum tcmu_opcode op)
+{
+ hdr->len_op &= ~TCMU_OP_MASK;
+ hdr->len_op |= (op & TCMU_OP_MASK);
+}
+
+static inline __u32 tcmu_hdr_get_len(struct tcmu_cmd_entry_hdr *hdr)
+{
+ return hdr->len_op & ~TCMU_OP_MASK;
+}
+
+static inline void tcmu_hdr_set_len(struct tcmu_cmd_entry_hdr *hdr, __u32 len)
+{
+ hdr->len_op &= TCMU_OP_MASK;
+ hdr->len_op |= len;
+}
+
+/* Currently the same as SCSI_SENSE_BUFFERSIZE */
+#define TCMU_SENSE_BUFFERSIZE 96
+
+struct tcmu_cmd_entry {
+ struct tcmu_cmd_entry_hdr hdr;
+
+ uint16_t cmd_id;
+ uint16_t __pad1;
+
+ union {
+ struct {
+ uint64_t cdb_off;
+ uint64_t iov_cnt;
+ struct iovec iov[0];
+ } req;
+ struct {
+ uint8_t scsi_status;
+ uint8_t __pad1;
+ uint16_t __pad2;
+ uint32_t __pad3;
+ char sense_buffer[TCMU_SENSE_BUFFERSIZE];
+ } rsp;
+ };
+
+} __packed;
+
+#define TCMU_OP_ALIGN_SIZE sizeof(uint64_t)
+
+enum tcmu_genl_cmd {
+ TCMU_CMD_UNSPEC,
+ TCMU_CMD_ADDED_DEVICE,
+ TCMU_CMD_REMOVED_DEVICE,
+ __TCMU_CMD_MAX,
+};
+#define TCMU_CMD_MAX (__TCMU_CMD_MAX - 1)
+
+enum tcmu_genl_attr {
+ TCMU_ATTR_UNSPEC,
+ TCMU_ATTR_DEVICE,
+ TCMU_ATTR_MINOR,
+ __TCMU_ATTR_MAX,
+};
+#define TCMU_ATTR_MAX (__TCMU_ATTR_MAX - 1)
+
+#endif
#ifndef _V4L2_DV_TIMINGS_H
#define _V4L2_DV_TIMINGS_H
+#if __GNUC__ < 4 || (__GNUC__ == 4 && (__GNUC_MINOR__ < 6))
+/* Sadly gcc versions older than 4.6 have a bug in how they initialize
+ anonymous unions where they require additional curly brackets.
+ This violates the C1x standard. This workaround adds the curly brackets
+ if needed. */
#define V4L2_INIT_BT_TIMINGS(_width, args...) \
{ .bt = { _width , ## args } }
+#else
+#define V4L2_INIT_BT_TIMINGS(_width, args...) \
+ .bt = { _width , ## args }
+#endif
/* CEA-861-E timings (i.e. standard HDTV timings) */
#define SNDRV_PCM_FORMAT_DSD_U8 ((__force snd_pcm_format_t) 48) /* DSD, 1-byte samples DSD (x8) */
#define SNDRV_PCM_FORMAT_DSD_U16_LE ((__force snd_pcm_format_t) 49) /* DSD, 2-byte samples DSD (x16), little endian */
#define SNDRV_PCM_FORMAT_DSD_U32_LE ((__force snd_pcm_format_t) 50) /* DSD, 4-byte samples DSD (x32), little endian */
-#define SNDRV_PCM_FORMAT_LAST SNDRV_PCM_FORMAT_DSD_U32_LE
+#define SNDRV_PCM_FORMAT_DSD_U16_BE ((__force snd_pcm_format_t) 51) /* DSD, 2-byte samples DSD (x16), big endian */
+#define SNDRV_PCM_FORMAT_DSD_U32_BE ((__force snd_pcm_format_t) 52) /* DSD, 4-byte samples DSD (x32), big endian */
+#define SNDRV_PCM_FORMAT_LAST SNDRV_PCM_FORMAT_DSD_U32_BE
#ifdef SNDRV_LITTLE_ENDIAN
#define SNDRV_PCM_FORMAT_S16 SNDRV_PCM_FORMAT_S16_LE
thousands of CPUs. It also scales down nicely to
smaller systems.
-config TREE_PREEMPT_RCU
+config PREEMPT_RCU
bool "Preemptible tree-based hierarchical RCU"
depends on PREEMPT
select IRQ_WORK
endchoice
-config PREEMPT_RCU
- def_bool TREE_PREEMPT_RCU
- help
- This option enables preemptible-RCU code that is common between
- TREE_PREEMPT_RCU and, in the old days, TINY_PREEMPT_RCU.
-
config TASKS_RCU
bool "Task_based RCU implementation using voluntary context switch"
default n
If unsure, say N.
config RCU_STALL_COMMON
- def_bool ( TREE_RCU || TREE_PREEMPT_RCU || RCU_TRACE )
+ def_bool ( TREE_RCU || PREEMPT_RCU || RCU_TRACE )
help
This option enables RCU CPU stall code that is common between
the TINY and TREE variants of RCU. The purpose is to allow
int "Tree-based hierarchical RCU fanout value"
range 2 64 if 64BIT
range 2 32 if !64BIT
- depends on TREE_RCU || TREE_PREEMPT_RCU
+ depends on TREE_RCU || PREEMPT_RCU
default 64 if 64BIT
default 32 if !64BIT
help
int "Tree-based hierarchical RCU leaf-level fanout value"
range 2 RCU_FANOUT if 64BIT
range 2 RCU_FANOUT if !64BIT
- depends on TREE_RCU || TREE_PREEMPT_RCU
+ depends on TREE_RCU || PREEMPT_RCU
default 16
help
This option controls the leaf-level fanout of hierarchical
config RCU_FANOUT_EXACT
bool "Disable tree-based hierarchical RCU auto-balancing"
- depends on TREE_RCU || TREE_PREEMPT_RCU
+ depends on TREE_RCU || PREEMPT_RCU
default n
help
This option forces use of the exact RCU_FANOUT value specified,
Say N if you are unsure.
config TREE_RCU_TRACE
- def_bool RCU_TRACE && ( TREE_RCU || TREE_PREEMPT_RCU )
+ def_bool RCU_TRACE && ( TREE_RCU || PREEMPT_RCU )
select DEBUG_FS
help
This option provides tracing for the TREE_RCU and
- TREE_PREEMPT_RCU implementations, permitting Makefile to
+ PREEMPT_RCU implementations, permitting Makefile to
trivially select kernel/rcutree_trace.c.
config RCU_BOOST
Say Y here if you are working with real-time apps or heavy loads
Say N here if you are unsure.
-config RCU_BOOST_PRIO
- int "Real-time priority to boost RCU readers to"
+config RCU_KTHREAD_PRIO
+ int "Real-time priority to use for RCU worker threads"
range 1 99
depends on RCU_BOOST
default 1
help
- This option specifies the real-time priority to which long-term
- preempted RCU readers are to be boosted. If you are working
- with a real-time application that has one or more CPU-bound
- threads running at a real-time priority level, you should set
- RCU_BOOST_PRIO to a priority higher then the highest-priority
- real-time CPU-bound thread. The default RCU_BOOST_PRIO value
- of 1 is appropriate in the common case, which is real-time
+ This option specifies the SCHED_FIFO priority value that will be
+ assigned to the rcuc/n and rcub/n threads and is also the value
+ used for RCU_BOOST (if enabled). If you are working with a
+ real-time application that has one or more CPU-bound threads
+ running at a real-time priority level, you should set
+ RCU_KTHREAD_PRIO to a priority higher than the highest-priority
+ real-time CPU-bound application thread. The default RCU_KTHREAD_PRIO
+ value of 1 is appropriate in the common case, which is real-time
applications that do not have any CPU-bound threads.
Some real-time applications might not have a single real-time
thread that saturates a given CPU, but instead might have
multiple real-time threads that, taken together, fully utilize
- that CPU. In this case, you should set RCU_BOOST_PRIO to
+ that CPU. In this case, you should set RCU_KTHREAD_PRIO to
a priority higher than the lowest-priority thread that is
conspiring to prevent the CPU from running any non-real-time
tasks. For example, if one thread at priority 10 and another
thread at priority 5 are between themselves fully consuming
- the CPU time on a given CPU, then RCU_BOOST_PRIO should be
+ the CPU time on a given CPU, then RCU_KTHREAD_PRIO should be
set to priority 6 or higher.
Specify the real-time priority, or take the default if unsure.
config RCU_NOCB_CPU
bool "Offload RCU callback processing from boot-selected CPUs"
- depends on TREE_RCU || TREE_PREEMPT_RCU
+ depends on TREE_RCU || PREEMPT_RCU
default n
help
Use this option to reduce OS jitter for aggressive HPC or
choice
prompt "Build-forced no-CBs CPUs"
default RCU_NOCB_CPU_NONE
+ depends on RCU_NOCB_CPU
help
This option allows no-CBs CPUs (whose RCU callbacks are invoked
from kthreads rather than from softirq context) to be specified
config RCU_NOCB_CPU_NONE
bool "No build_forced no-CBs CPUs"
- depends on RCU_NOCB_CPU
help
This option does not force any of the CPUs to be no-CBs CPUs.
Only CPUs designated by the rcu_nocbs= boot parameter will be
config RCU_NOCB_CPU_ZERO
bool "CPU 0 is a build_forced no-CBs CPU"
- depends on RCU_NOCB_CPU
help
This option forces CPU 0 to be a no-CBs CPU, so that its RCU
callbacks are invoked by a per-CPU kthread whose name begins
config RCU_NOCB_CPU_ALL
bool "All CPUs are build_forced no-CBs CPUs"
- depends on RCU_NOCB_CPU
help
This option forces all CPUs to be no-CBs CPUs. The rcu_nocbs=
boot parameter will be ignored. All CPUs' RCU callbacks will
config HAVE_PCSPKR_PLATFORM
bool
+# interpreter that classic socket filters depend on
+config BPF
+ bool
+
menuconfig EXPERT
bool "Configure standard kernel features (expert users)"
# Unhide debug options, to make the on-by-default options visible
If unsure, say Y.
+# syscall, maps, verifier
+config BPF_SYSCALL
+ bool "Enable bpf() system call" if EXPERT
+ select ANON_INODES
+ select BPF
+ default n
+ help
+ Enable the bpf() system call that allows to manipulate eBPF
+ programs and maps via file descriptors.
+
config SHMEM
bool "Use full shmem filesystem" if EXPERT
default y
static_command_line, __start___param,
__stop___param - __start___param,
-1, -1, &unknown_bootoption);
- if (after_dashes)
+ if (!IS_ERR_OR_NULL(after_dashes))
parse_args("Setting init args", after_dashes, NULL, 0, -1, -1,
set_init_arg);
return retval;
}
- id = ipc_addid(&sem_ids(ns), &sma->sem_perm, ns->sc_semmni);
- if (id < 0) {
- ipc_rcu_putref(sma, sem_rcu_free);
- return id;
- }
- ns->used_sems += nsems;
-
sma->sem_base = (struct sem *) &sma[1];
for (i = 0; i < nsems; i++) {
INIT_LIST_HEAD(&sma->list_id);
sma->sem_nsems = nsems;
sma->sem_ctime = get_seconds();
+
+ id = ipc_addid(&sem_ids(ns), &sma->sem_perm, ns->sc_semmni);
+ if (id < 0) {
+ ipc_rcu_putref(sma, sem_rcu_free);
+ return id;
+ }
+ ns->used_sems += nsems;
+
sem_unlock(sma, -1);
rcu_read_unlock();
obj-$(CONFIG_TRACEPOINTS) += trace/
obj-$(CONFIG_IRQ_WORK) += irq_work.o
obj-$(CONFIG_CPU_PM) += cpu_pm.o
-obj-$(CONFIG_NET) += bpf/
+obj-$(CONFIG_BPF) += bpf/
obj-$(CONFIG_PERF_EVENTS) += events/
set_freezable();
while (!kthread_should_stop()) {
struct sk_buff *skb;
- DECLARE_WAITQUEUE(wait, current);
flush_hold_queue();
audit_printk_skb(skb);
continue;
}
- set_current_state(TASK_INTERRUPTIBLE);
- add_wait_queue(&kauditd_wait, &wait);
- if (!skb_queue_len(&audit_skb_queue)) {
- try_to_freeze();
- schedule();
- }
-
- __set_current_state(TASK_RUNNING);
- remove_wait_queue(&kauditd_wait, &wait);
+ wait_event_freezable(kauditd_wait, skb_queue_len(&audit_skb_queue));
}
return 0;
}
ab = audit_log_start(NULL, GFP_KERNEL, AUDIT_FEATURE_CHANGE);
audit_log_task_info(ab, current);
- audit_log_format(ab, "feature=%s old=%u new=%u old_lock=%u new_lock=%u res=%d",
+ audit_log_format(ab, " feature=%s old=%u new=%u old_lock=%u new_lock=%u res=%d",
audit_feature_names[which], !!old_feature, !!new_feature,
!!old_lock, !!new_lock, res);
audit_log_end(ab);
chunk->owners[i].index = i;
}
fsnotify_init_mark(&chunk->mark, audit_tree_destroy_watch);
+ chunk->mark.mask = FS_IN_IGNORED;
return chunk;
}
-obj-y := core.o syscall.o verifier.o
-
+obj-y := core.o
+obj-$(CONFIG_BPF_SYSCALL) += syscall.o verifier.o
ifdef CONFIG_TEST_BPF
-obj-y += test_stub.o
+obj-$(CONFIG_BPF_SYSCALL) += test_stub.o
endif
schedule_work(&aux->work);
}
EXPORT_SYMBOL_GPL(bpf_prog_free);
+
+/* To execute LD_ABS/LD_IND instructions __bpf_prog_run() may call
+ * skb_copy_bits(), so provide a weak definition of it for NET-less config.
+ */
+int __weak skb_copy_bits(const struct sk_buff *skb, int offset, void *to,
+ int len)
+{
+ return -EFAULT;
+}
if (memcmp(&old->regs[i], &cur->regs[i],
sizeof(old->regs[0])) != 0) {
if (old->regs[i].type == NOT_INIT ||
- old->regs[i].type == UNKNOWN_VALUE)
+ (old->regs[i].type == UNKNOWN_VALUE &&
+ cur->regs[i].type != NOT_INIT))
continue;
return false;
}
}
NOKPROBE_SYMBOL(context_tracking_user_enter);
-#ifdef CONFIG_PREEMPT
-/**
- * preempt_schedule_context - preempt_schedule called by tracing
- *
- * The tracing infrastructure uses preempt_enable_notrace to prevent
- * recursion and tracing preempt enabling caused by the tracing
- * infrastructure itself. But as tracing can happen in areas coming
- * from userspace or just about to enter userspace, a preempt enable
- * can occur before user_exit() is called. This will cause the scheduler
- * to be called when the system is still in usermode.
- *
- * To prevent this, the preempt_enable_notrace will use this function
- * instead of preempt_schedule() to exit user context if needed before
- * calling the scheduler.
- */
-asmlinkage __visible void __sched notrace preempt_schedule_context(void)
-{
- enum ctx_state prev_ctx;
-
- if (likely(!preemptible()))
- return;
-
- /*
- * Need to disable preemption in case user_exit() is traced
- * and the tracer calls preempt_enable_notrace() causing
- * an infinite recursion.
- */
- preempt_disable_notrace();
- prev_ctx = exception_enter();
- preempt_enable_no_resched_notrace();
-
- preempt_schedule();
-
- preempt_disable_notrace();
- exception_exit(prev_ctx);
- preempt_enable_notrace();
-}
-EXPORT_SYMBOL_GPL(preempt_schedule_context);
-#endif /* CONFIG_PREEMPT */
-
/**
* context_tracking_user_exit - Inform the context tracking that the CPU is
* exiting userspace mode and entering the kernel.
* an ongoing cpu hotplug operation.
*/
int refcount;
+ /* And allows lockless put_online_cpus(). */
+ atomic_t puts_pending;
#ifdef CONFIG_DEBUG_LOCK_ALLOC
struct lockdep_map dep_map;
#define cpuhp_lock_acquire() lock_map_acquire(&cpu_hotplug.dep_map)
#define cpuhp_lock_release() lock_map_release(&cpu_hotplug.dep_map)
+static void apply_puts_pending(int max)
+{
+ int delta;
+
+ if (atomic_read(&cpu_hotplug.puts_pending) >= max) {
+ delta = atomic_xchg(&cpu_hotplug.puts_pending, 0);
+ cpu_hotplug.refcount -= delta;
+ }
+}
+
void get_online_cpus(void)
{
might_sleep();
return;
cpuhp_lock_acquire_read();
mutex_lock(&cpu_hotplug.lock);
+ apply_puts_pending(65536);
cpu_hotplug.refcount++;
mutex_unlock(&cpu_hotplug.lock);
}
if (!mutex_trylock(&cpu_hotplug.lock))
return false;
cpuhp_lock_acquire_tryread();
+ apply_puts_pending(65536);
cpu_hotplug.refcount++;
mutex_unlock(&cpu_hotplug.lock);
return true;
{
if (cpu_hotplug.active_writer == current)
return;
- mutex_lock(&cpu_hotplug.lock);
+ if (!mutex_trylock(&cpu_hotplug.lock)) {
+ atomic_inc(&cpu_hotplug.puts_pending);
+ cpuhp_lock_release();
+ return;
+ }
if (WARN_ON(!cpu_hotplug.refcount))
cpu_hotplug.refcount++; /* try to fix things up */
cpuhp_lock_acquire();
for (;;) {
mutex_lock(&cpu_hotplug.lock);
+ apply_puts_pending(1);
if (likely(!cpu_hotplug.refcount))
break;
__set_current_state(TASK_UNINTERRUPTIBLE);
goto out;
}
+ /*
+ * We can't shrink if we won't have enough room for SCHED_DEADLINE
+ * tasks.
+ */
+ ret = -EBUSY;
+ if (is_cpu_exclusive(cur) &&
+ !cpuset_cpumask_can_shrink(cur->cpus_allowed,
+ trial->cpus_allowed))
+ goto out;
+
ret = 0;
out:
rcu_read_unlock();
goto out_unlock;
cgroup_taskset_for_each(task, tset) {
- /*
- * Kthreads which disallow setaffinity shouldn't be moved
- * to a new cpuset; we don't want to change their cpu
- * affinity and isolating such threads by their set of
- * allowed nodes is unnecessary. Thus, cpusets are not
- * applicable for such threads. This prevents checking for
- * success of set_cpus_allowed_ptr() on all attached tasks
- * before cpus_allowed may be changed.
- */
- ret = -EINVAL;
- if (task->flags & PF_NO_SETAFFINITY)
+ ret = task_can_attach(task, cs->cpus_allowed);
+ if (ret)
goto out_unlock;
ret = security_task_setscheduler(task);
if (ret)
if (!task) {
/*
- * Per cpu events are removed via an smp call and
- * the removal is always successful.
+ * Per cpu events are removed via an smp call. The removal can
+ * fail if the CPU is currently offline, but in that case we
+ * already called __perf_remove_from_context from
+ * perf_event_exit_cpu.
*/
cpu_function_call(event->cpu, __perf_remove_from_context, &re);
return;
}
}
-static void perf_sample_regs_user(struct perf_regs_user *regs_user,
+static void perf_sample_regs_user(struct perf_regs *regs_user,
struct pt_regs *regs)
{
if (!user_mode(regs)) {
}
if (regs) {
- regs_user->regs = regs;
regs_user->abi = perf_reg_abi(current);
+ regs_user->regs = regs;
+ } else {
+ regs_user->abi = PERF_SAMPLE_REGS_ABI_NONE;
+ regs_user->regs = NULL;
}
}
+static void perf_sample_regs_intr(struct perf_regs *regs_intr,
+ struct pt_regs *regs)
+{
+ regs_intr->regs = regs;
+ regs_intr->abi = perf_reg_abi(current);
+}
+
+
/*
* Get remaining task size from user stack pointer.
*
if (sample_type & PERF_SAMPLE_TRANSACTION)
perf_output_put(handle, data->txn);
+ if (sample_type & PERF_SAMPLE_REGS_INTR) {
+ u64 abi = data->regs_intr.abi;
+ /*
+ * If there are no regs to dump, notice it through
+ * first u64 being zero (PERF_SAMPLE_REGS_ABI_NONE).
+ */
+ perf_output_put(handle, abi);
+
+ if (abi) {
+ u64 mask = event->attr.sample_regs_intr;
+
+ perf_output_sample_regs(handle,
+ data->regs_intr.regs,
+ mask);
+ }
+ }
+
if (!event->attr.watermark) {
int wakeup_events = event->attr.wakeup_events;
header->size += size;
}
+ if (sample_type & (PERF_SAMPLE_REGS_USER | PERF_SAMPLE_STACK_USER))
+ perf_sample_regs_user(&data->regs_user, regs);
+
if (sample_type & PERF_SAMPLE_REGS_USER) {
/* regs dump ABI info */
int size = sizeof(u64);
- perf_sample_regs_user(&data->regs_user, regs);
-
if (data->regs_user.regs) {
u64 mask = event->attr.sample_regs_user;
size += hweight64(mask) * sizeof(u64);
* in case new sample type is added, because we could eat
* up the rest of the sample size.
*/
- struct perf_regs_user *uregs = &data->regs_user;
u16 stack_size = event->attr.sample_stack_user;
u16 size = sizeof(u64);
- if (!uregs->abi)
- perf_sample_regs_user(uregs, regs);
-
stack_size = perf_sample_ustack_size(stack_size, header->size,
- uregs->regs);
+ data->regs_user.regs);
/*
* If there is something to dump, add space for the dump
data->stack_user_size = stack_size;
header->size += size;
}
+
+ if (sample_type & PERF_SAMPLE_REGS_INTR) {
+ /* regs dump ABI info */
+ int size = sizeof(u64);
+
+ perf_sample_regs_intr(&data->regs_intr, regs);
+
+ if (data->regs_intr.regs) {
+ u64 mask = event->attr.sample_regs_intr;
+
+ size += hweight64(mask) * sizeof(u64);
+ }
+
+ header->size += size;
+ }
}
static void perf_event_output(struct perf_event *event,
return 0;
}
-static int perf_swevent_event_idx(struct perf_event *event)
-{
- return 0;
-}
-
static struct pmu perf_swevent = {
.task_ctx_nr = perf_sw_context,
.start = perf_swevent_start,
.stop = perf_swevent_stop,
.read = perf_swevent_read,
-
- .event_idx = perf_swevent_event_idx,
};
#ifdef CONFIG_EVENT_TRACING
.start = perf_swevent_start,
.stop = perf_swevent_stop,
.read = perf_swevent_read,
-
- .event_idx = perf_swevent_event_idx,
};
static inline void perf_tp_register(void)
.start = cpu_clock_event_start,
.stop = cpu_clock_event_stop,
.read = cpu_clock_event_read,
-
- .event_idx = perf_swevent_event_idx,
};
/*
.start = task_clock_event_start,
.stop = task_clock_event_stop,
.read = task_clock_event_read,
-
- .event_idx = perf_swevent_event_idx,
};
static void perf_pmu_nop_void(struct pmu *pmu)
static int perf_event_idx_default(struct perf_event *event)
{
- return event->hw.idx + 1;
+ return 0;
}
/*
ret = -EINVAL;
}
+ if (attr->sample_type & PERF_SAMPLE_REGS_INTR)
+ ret = perf_reg_validate(attr->sample_regs_intr);
out:
return ret;
static void __perf_event_exit_context(void *__info)
{
- struct remove_event re = { .detach_group = false };
+ struct remove_event re = { .detach_group = true };
struct perf_event_context *ctx = __info;
perf_pmu_rotate_stop(ctx->pmu);
bp->hw.state = PERF_HES_STOPPED;
}
-static int hw_breakpoint_event_idx(struct perf_event *bp)
-{
- return 0;
-}
-
static struct pmu perf_breakpoint = {
.task_ctx_nr = perf_sw_context, /* could eventually get its own */
.start = hw_breakpoint_start,
.stop = hw_breakpoint_stop,
.read = hw_breakpoint_pmu_read,
-
- .event_idx = hw_breakpoint_event_idx,
};
int __init init_hw_breakpoint(void)
if (__fatal_signal_pending(t) || arch_uprobe_xol_was_trapped(t)) {
utask->state = UTASK_SSTEP_TRAPPED;
set_tsk_thread_flag(t, TIF_UPROBE);
- set_tsk_thread_flag(t, TIF_NOTIFY_RESUME);
}
}
get_task_struct(p);
read_unlock(&tasklist_lock);
+ sched_annotate_sleep();
+
if ((exit_code & 0x7f) == 0) {
why = CLD_EXITED;
status = exit_code >> 8;
* thread can reap it because we its state == DEAD/TRACE.
*/
read_unlock(&tasklist_lock);
+ sched_annotate_sleep();
retval = wo->wo_rusage
? getrusage(p, RUSAGE_BOTH, wo->wo_rusage) : 0;
pid = task_pid_vnr(p);
why = ptrace ? CLD_TRAPPED : CLD_STOPPED;
read_unlock(&tasklist_lock);
+ sched_annotate_sleep();
if (unlikely(wo->wo_flags & WNOWAIT))
return wait_noreap_copyout(wo, p, pid, uid, why, exit_code);
pid = task_pid_vnr(p);
get_task_struct(p);
read_unlock(&tasklist_lock);
+ sched_annotate_sleep();
if (!wo->wo_info) {
retval = wo->wo_rusage
{
if (atomic_dec_and_test(&sighand->count)) {
signalfd_cleanup(sighand);
+ /*
+ * sighand_cachep is SLAB_DESTROY_BY_RCU so we can free it
+ * without an RCU grace period, see __lock_task_sighand().
+ */
kmem_cache_free(sighand_cachep, sighand);
}
}
-
/*
* Initialize POSIX timer handling for a thread group.
*/
if (p->flags & (PF_NOFREEZE | PF_SUSPEND_TASK))
return false;
+ if (test_thread_flag(TIF_MEMDIE))
+ return false;
+
if (pm_nosig_freezing || cgroup_freezing(p))
return true;
{
unsigned long flags;
- /*
- * Clear freezing and kick @p if FROZEN. Clearing is guaranteed to
- * be visible to @p as waking up implies wmb. Waking up inside
- * freezer_lock also prevents wakeups from leaking outside
- * refrigerator.
- */
spin_lock_irqsave(&freezer_lock, flags);
if (frozen(p))
wake_up_process(p);
*
* Where (A) orders the waiters increment and the futex value read through
* atomic operations (see hb_waiters_inc) and where (B) orders the write
- * to futex and the waiters read -- this is done by the barriers in
- * get_futex_key_refs(), through either ihold or atomic_inc, depending on the
- * futex type.
+ * to futex and the waiters read -- this is done by the barriers for both
+ * shared and private futexes in get_futex_key_refs().
*
* This yields the following case (where X:=waiters, Y:=futex):
*
futex_get_mm(key); /* implies MB (B) */
break;
default:
+ /*
+ * Private futexes do not hold reference on an inode or
+ * mm, therefore the only purpose of calling get_futex_key_refs
+ * is because we need the barrier for the lockless waiter check.
+ */
smp_mb(); /* explicit MB (B) */
}
}
/*
* Drop a reference to the resource addressed by a key.
- * The hash bucket spinlock must not be held.
+ * The hash bucket spinlock must not be held. This is
+ * a no-op for private futexes, see comment in the get
+ * counterpart.
*/
static void drop_futex_key_refs(union futex_key *key)
{
return pi_state;
}
+/*
+ * Must be called with the hb lock held.
+ */
static void free_pi_state(struct futex_pi_state *pi_state)
{
+ if (!pi_state)
+ return;
+
if (!atomic_dec_and_test(&pi_state->refcount))
return;
}
retry:
- if (pi_state != NULL) {
- /*
- * We will have to lookup the pi_state again, so free this one
- * to keep the accounting correct.
- */
- free_pi_state(pi_state);
- pi_state = NULL;
- }
-
ret = get_futex_key(uaddr1, flags & FLAGS_SHARED, &key1, VERIFY_READ);
if (unlikely(ret != 0))
goto out;
case 0:
break;
case -EFAULT:
+ free_pi_state(pi_state);
+ pi_state = NULL;
double_unlock_hb(hb1, hb2);
hb_waiters_dec(hb2);
put_futex_key(&key2);
* exit to complete.
* - The user space value changed.
*/
+ free_pi_state(pi_state);
+ pi_state = NULL;
double_unlock_hb(hb1, hb2);
hb_waiters_dec(hb2);
put_futex_key(&key2);
}
out_unlock:
+ free_pi_state(pi_state);
double_unlock_hb(hb1, hb2);
hb_waiters_dec(hb2);
out_put_key1:
put_futex_key(&key1);
out:
- if (pi_state != NULL)
- free_pi_state(pi_state);
return ret ? ret : task_count;
}
config GCOV_PROFILE_ALL
bool "Profile entire Kernel"
depends on GCOV_KERNEL
- depends on SUPERH || S390 || X86 || PPC || MICROBLAZE || ARM
+ depends on SUPERH || S390 || X86 || PPC || MICROBLAZE || ARM || ARM64
default n
---help---
This options activates profiling for the entire kernel.
EXPORT_SYMBOL(__request_module);
#endif /* CONFIG_MODULES */
+static void call_usermodehelper_freeinfo(struct subprocess_info *info)
+{
+ if (info->cleanup)
+ (*info->cleanup)(info);
+ kfree(info);
+}
+
+static void umh_complete(struct subprocess_info *sub_info)
+{
+ struct completion *comp = xchg(&sub_info->complete, NULL);
+ /*
+ * See call_usermodehelper_exec(). If xchg() returns NULL
+ * we own sub_info, the UMH_KILLABLE caller has gone away
+ * or the caller used UMH_NO_WAIT.
+ */
+ if (comp)
+ complete(comp);
+ else
+ call_usermodehelper_freeinfo(sub_info);
+}
+
/*
* This is the task which runs the usermode application
*/
static int ____call_usermodehelper(void *data)
{
struct subprocess_info *sub_info = data;
+ int wait = sub_info->wait & ~UMH_KILLABLE;
struct cred *new;
int retval;
retval = -ENOMEM;
new = prepare_kernel_cred(current);
if (!new)
- goto fail;
+ goto out;
spin_lock(&umh_sysctl_lock);
new->cap_bset = cap_intersect(usermodehelper_bset, new->cap_bset);
retval = sub_info->init(sub_info, new);
if (retval) {
abort_creds(new);
- goto fail;
+ goto out;
}
}
retval = do_execve(getname_kernel(sub_info->path),
(const char __user *const __user *)sub_info->argv,
(const char __user *const __user *)sub_info->envp);
+out:
+ sub_info->retval = retval;
+ /* wait_for_helper() will call umh_complete if UHM_WAIT_PROC. */
+ if (wait != UMH_WAIT_PROC)
+ umh_complete(sub_info);
if (!retval)
return 0;
-
- /* Exec failed? */
-fail:
- sub_info->retval = retval;
do_exit(0);
}
return ____call_usermodehelper(data);
}
-static void call_usermodehelper_freeinfo(struct subprocess_info *info)
-{
- if (info->cleanup)
- (*info->cleanup)(info);
- kfree(info);
-}
-
-static void umh_complete(struct subprocess_info *sub_info)
-{
- struct completion *comp = xchg(&sub_info->complete, NULL);
- /*
- * See call_usermodehelper_exec(). If xchg() returns NULL
- * we own sub_info, the UMH_KILLABLE caller has gone away.
- */
- if (comp)
- complete(comp);
- else
- call_usermodehelper_freeinfo(sub_info);
-}
-
/* Keventd can't block, but this (a child) can. */
static int wait_for_helper(void *data)
{
kmod_thread_locker = NULL;
}
- switch (wait) {
- case UMH_NO_WAIT:
- call_usermodehelper_freeinfo(sub_info);
- break;
-
- case UMH_WAIT_PROC:
- if (pid > 0)
- break;
- /* FALLTHROUGH */
- case UMH_WAIT_EXEC:
- if (pid < 0)
- sub_info->retval = pid;
+ if (pid < 0) {
+ sub_info->retval = pid;
umh_complete(sub_info);
}
}
goto out;
}
- sub_info->complete = &done;
+ /*
+ * Set the completion pointer only if there is a waiter.
+ * This makes it possible to use umh_complete to free
+ * the data structure in case of UMH_NO_WAIT.
+ */
+ sub_info->complete = (wait == UMH_NO_WAIT) ? NULL : &done;
sub_info->wait = wait;
queue_work(khelper_wq, &sub_info->work);
* reschedule now, before we try-lock the mutex. This avoids getting
* scheduled out right after we obtained the mutex.
*/
- if (need_resched())
+ if (need_resched()) {
+ /*
+ * We _should_ have TASK_RUNNING here, but just in case
+ * we do not, make it so, otherwise we might get stuck.
+ */
+ __set_current_state(TASK_RUNNING);
schedule_preempt_disabled();
+ }
return false;
}
return 0;
}
+/*
+ * Can't use wait_event_interruptible() because our condition
+ * 'finished_loading()' contains a blocking primitive itself (mutex_lock).
+ */
+static int wait_finished_loading(struct module *mod)
+{
+ DEFINE_WAIT_FUNC(wait, woken_wake_function);
+ int ret = 0;
+
+ add_wait_queue(&module_wq, &wait);
+ for (;;) {
+ if (finished_loading(mod->name))
+ break;
+
+ if (signal_pending(current)) {
+ ret = -ERESTARTSYS;
+ break;
+ }
+
+ wait_woken(&wait, TASK_INTERRUPTIBLE, MAX_SCHEDULE_TIMEOUT);
+ }
+ remove_wait_queue(&module_wq, &wait);
+
+ return ret;
+}
+
/*
* We try to place it in the list now to make sure it's unique before
* we dedicate too many resources. In particular, temporary percpu
|| old->state == MODULE_STATE_UNFORMED) {
/* Wait in case it fails to load. */
mutex_unlock(&module_mutex);
- err = wait_event_interruptible(module_wq,
- finished_loading(mod->name));
+
+ err = wait_finished_loading(mod);
if (err)
goto out_unlocked;
goto again;
* 'I' - Working around severe firmware bug.
* 'O' - Out-of-tree module has been loaded.
* 'E' - Unsigned module has been loaded.
+ * 'L' - A soft lockup has previously occurred.
*
* The string is overwritten by the next call to print_tainted().
*/
error = dpm_suspend_start(PMSG_QUIESCE);
if (!error) {
error = resume_target_kernel(platform_mode);
- dpm_resume_end(PMSG_RECOVER);
+ /*
+ * The above should either succeed and jump to the new kernel,
+ * or return with an error. Otherwise things are just
+ * undefined, so let's be paranoid.
+ */
+ BUG_ON(!error);
}
+ dpm_resume_end(PMSG_RECOVER);
pm_restore_gfp_mask();
resume_console();
pm_restore_console();
while (true) {
todo = 0;
read_lock(&tasklist_lock);
- do_each_thread(g, p) {
+ for_each_process_thread(g, p) {
if (p == current || !freeze_task(p))
continue;
if (!freezer_should_skip(p))
todo++;
- } while_each_thread(g, p);
+ }
read_unlock(&tasklist_lock);
if (!user_only) {
if (!wakeup) {
read_lock(&tasklist_lock);
- do_each_thread(g, p) {
+ for_each_process_thread(g, p) {
if (p != current && !freezer_should_skip(p)
&& freezing(p) && !frozen(p))
sched_show_task(p);
- } while_each_thread(g, p);
+ }
read_unlock(&tasklist_lock);
}
} else {
return todo ? -EBUSY : 0;
}
+static bool __check_frozen_processes(void)
+{
+ struct task_struct *g, *p;
+
+ for_each_process_thread(g, p)
+ if (p != current && !freezer_should_skip(p) && !frozen(p))
+ return false;
+
+ return true;
+}
+
+/*
+ * Returns true if all freezable tasks (except for current) are frozen already
+ */
+static bool check_frozen_processes(void)
+{
+ bool ret;
+
+ read_lock(&tasklist_lock);
+ ret = __check_frozen_processes();
+ read_unlock(&tasklist_lock);
+ return ret;
+}
+
/**
* freeze_processes - Signal user space processes to enter the refrigerator.
* The current thread will not be frozen. The same process that calls
int freeze_processes(void)
{
int error;
+ int oom_kills_saved;
error = __usermodehelper_disable(UMH_FREEZING);
if (error)
pm_wakeup_clear();
printk("Freezing user space processes ... ");
pm_freezing = true;
+ oom_kills_saved = oom_kills_count();
error = try_to_freeze_tasks(true);
if (!error) {
- printk("done.");
__usermodehelper_set_disable_depth(UMH_DISABLED);
oom_killer_disable();
+
+ /*
+ * There might have been an OOM kill while we were
+ * freezing tasks and the killed task might be still
+ * on the way out so we have to double check for race.
+ */
+ if (oom_kills_count() != oom_kills_saved &&
+ !check_frozen_processes()) {
+ __usermodehelper_set_disable_depth(UMH_ENABLED);
+ printk("OOM in progress.");
+ error = -EBUSY;
+ } else {
+ printk("done.");
+ }
}
printk("\n");
BUG_ON(in_atomic());
thaw_workqueues();
read_lock(&tasklist_lock);
- do_each_thread(g, p) {
+ for_each_process_thread(g, p) {
/* No other threads should have PF_SUSPEND_TASK set */
WARN_ON((p != curr) && (p->flags & PF_SUSPEND_TASK));
__thaw_task(p);
- } while_each_thread(g, p);
+ }
read_unlock(&tasklist_lock);
WARN_ON(!(curr->flags & PF_SUSPEND_TASK));
thaw_workqueues();
read_lock(&tasklist_lock);
- do_each_thread(g, p) {
+ for_each_process_thread(g, p) {
if (p->flags & (PF_KTHREAD | PF_WQ_WORKER))
__thaw_task(p);
- } while_each_thread(g, p);
+ }
read_unlock(&tasklist_lock);
schedule();
};
+static BLOCKING_NOTIFIER_HEAD(memory_bandwidth_notifier);
+static struct pm_qos_constraints memory_bw_constraints = {
+ .list = PLIST_HEAD_INIT(memory_bw_constraints.list),
+ .target_value = PM_QOS_MEMORY_BANDWIDTH_DEFAULT_VALUE,
+ .default_value = PM_QOS_MEMORY_BANDWIDTH_DEFAULT_VALUE,
+ .no_constraint_value = PM_QOS_MEMORY_BANDWIDTH_DEFAULT_VALUE,
+ .type = PM_QOS_SUM,
+ .notifiers = &memory_bandwidth_notifier,
+};
+static struct pm_qos_object memory_bandwidth_pm_qos = {
+ .constraints = &memory_bw_constraints,
+ .name = "memory_bandwidth",
+};
+
+
static struct pm_qos_object *pm_qos_array[] = {
&null_pm_qos,
&cpu_dma_pm_qos,
&network_lat_pm_qos,
- &network_throughput_pm_qos
+ &network_throughput_pm_qos,
+ &memory_bandwidth_pm_qos,
};
static ssize_t pm_qos_power_write(struct file *filp, const char __user *buf,
/* unlocked internal variant */
static inline int pm_qos_get_value(struct pm_qos_constraints *c)
{
+ struct plist_node *node;
+ int total_value = 0;
+
if (plist_head_empty(&c->list))
return c->no_constraint_value;
case PM_QOS_MAX:
return plist_last(&c->list)->prio;
+ case PM_QOS_SUM:
+ plist_for_each(node, &c->list)
+ total_value += node->prio;
+
+ return total_value;
+
default:
/* runtime check for not using enum */
BUG();
static int platform_suspend_prepare_late(suspend_state_t state)
{
- return state == PM_SUSPEND_FREEZE && freeze_ops->prepare ?
+ return state == PM_SUSPEND_FREEZE && freeze_ops && freeze_ops->prepare ?
freeze_ops->prepare() : 0;
}
static void platform_resume_early(suspend_state_t state)
{
- if (state == PM_SUSPEND_FREEZE && freeze_ops->restore)
+ if (state == PM_SUSPEND_FREEZE && freeze_ops && freeze_ops->restore)
freeze_ops->restore();
}
obj-y += update.o srcu.o
obj-$(CONFIG_RCU_TORTURE_TEST) += rcutorture.o
obj-$(CONFIG_TREE_RCU) += tree.o
-obj-$(CONFIG_TREE_PREEMPT_RCU) += tree.o
+obj-$(CONFIG_PREEMPT_RCU) += tree.o
obj-$(CONFIG_TREE_RCU_TRACE) += tree_trace.o
obj-$(CONFIG_TINY_RCU) += tiny.o
*/
#define TPS(x) tracepoint_string(x)
+void rcu_early_boot_tests(void);
+
#endif /* __LINUX_RCU_H */
cur_ops->cb_barrier();
stutter_wait("rcu_torture_cbflood");
} while (!torture_must_stop());
+ vfree(rhp);
torture_kthread_stopping("rcu_torture_cbflood");
return 0;
}
* be called from hardirq context. It is normally called from the
* scheduling-clock interrupt.
*/
-void rcu_check_callbacks(int cpu, int user)
+void rcu_check_callbacks(int user)
{
RCU_TRACE(check_cpu_stalls());
if (user || rcu_is_cpu_rrupt_from_idle())
}
EXPORT_SYMBOL_GPL(call_rcu_bh);
-void rcu_init(void)
+void __init rcu_init(void)
{
open_softirq(RCU_SOFTIRQ, rcu_process_callbacks);
+
+ rcu_early_boot_tests();
}
.name = RCU_STATE_NAME(sname), \
.abbr = sabbr, \
}; \
-DEFINE_PER_CPU(struct rcu_data, sname##_data)
+DEFINE_PER_CPU_SHARED_ALIGNED(struct rcu_data, sname##_data)
RCU_STATE_INITIALIZER(rcu_sched, 's', call_rcu_sched);
RCU_STATE_INITIALIZER(rcu_bh, 'b', call_rcu_bh);
*/
static int rcu_scheduler_fully_active __read_mostly;
-#ifdef CONFIG_RCU_BOOST
-
-/*
- * Control variables for per-CPU and per-rcu_node kthreads. These
- * handle all flavors of RCU.
- */
-static DEFINE_PER_CPU(struct task_struct *, rcu_cpu_kthread_task);
-DEFINE_PER_CPU(unsigned int, rcu_cpu_kthread_status);
-DEFINE_PER_CPU(unsigned int, rcu_cpu_kthread_loops);
-DEFINE_PER_CPU(char, rcu_cpu_has_work);
-
-#endif /* #ifdef CONFIG_RCU_BOOST */
-
static void rcu_boost_kthread_setaffinity(struct rcu_node *rnp, int outgoingcpu);
static void invoke_rcu_core(void);
static void invoke_rcu_callbacks(struct rcu_state *rsp, struct rcu_data *rdp);
* and requires special handling for preemptible RCU.
* The caller must have disabled preemption.
*/
-void rcu_note_context_switch(int cpu)
+void rcu_note_context_switch(void)
{
trace_rcu_utilization(TPS("Start context switch"));
rcu_sched_qs();
- rcu_preempt_note_context_switch(cpu);
+ rcu_preempt_note_context_switch();
if (unlikely(raw_cpu_read(rcu_sched_qs_mask)))
rcu_momentary_dyntick_idle();
trace_rcu_utilization(TPS("End context switch"));
unsigned long *maxj),
bool *isidle, unsigned long *maxj);
static void force_quiescent_state(struct rcu_state *rsp);
-static int rcu_pending(int cpu);
+static int rcu_pending(void);
/*
* Return the number of RCU-sched batches processed thus far for debug & stats.
* we really have entered idle, and must do the appropriate accounting.
* The caller must have disabled interrupts.
*/
-static void rcu_eqs_enter_common(struct rcu_dynticks *rdtp, long long oldval,
- bool user)
+static void rcu_eqs_enter_common(long long oldval, bool user)
{
struct rcu_state *rsp;
struct rcu_data *rdp;
+ struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
trace_rcu_dyntick(TPS("Start"), oldval, rdtp->dynticks_nesting);
if (!user && !is_idle_task(current)) {
rdp = this_cpu_ptr(rsp->rda);
do_nocb_deferred_wakeup(rdp);
}
- rcu_prepare_for_idle(smp_processor_id());
+ rcu_prepare_for_idle();
/* CPUs seeing atomic_inc() must see prior RCU read-side crit sects */
smp_mb__before_atomic(); /* See above. */
atomic_inc(&rdtp->dynticks);
WARN_ON_ONCE((oldval & DYNTICK_TASK_NEST_MASK) == 0);
if ((oldval & DYNTICK_TASK_NEST_MASK) == DYNTICK_TASK_NEST_VALUE) {
rdtp->dynticks_nesting = 0;
- rcu_eqs_enter_common(rdtp, oldval, user);
+ rcu_eqs_enter_common(oldval, user);
} else {
rdtp->dynticks_nesting -= DYNTICK_TASK_NEST_VALUE;
}
local_irq_save(flags);
rcu_eqs_enter(false);
- rcu_sysidle_enter(this_cpu_ptr(&rcu_dynticks), 0);
+ rcu_sysidle_enter(0);
local_irq_restore(flags);
}
EXPORT_SYMBOL_GPL(rcu_idle_enter);
if (rdtp->dynticks_nesting)
trace_rcu_dyntick(TPS("--="), oldval, rdtp->dynticks_nesting);
else
- rcu_eqs_enter_common(rdtp, oldval, true);
- rcu_sysidle_enter(rdtp, 1);
+ rcu_eqs_enter_common(oldval, true);
+ rcu_sysidle_enter(1);
local_irq_restore(flags);
}
* we really have exited idle, and must do the appropriate accounting.
* The caller must have disabled interrupts.
*/
-static void rcu_eqs_exit_common(struct rcu_dynticks *rdtp, long long oldval,
- int user)
+static void rcu_eqs_exit_common(long long oldval, int user)
{
+ struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
+
rcu_dynticks_task_exit();
smp_mb__before_atomic(); /* Force ordering w/previous sojourn. */
atomic_inc(&rdtp->dynticks);
/* CPUs seeing atomic_inc() must see later RCU read-side crit sects */
smp_mb__after_atomic(); /* See above. */
WARN_ON_ONCE(!(atomic_read(&rdtp->dynticks) & 0x1));
- rcu_cleanup_after_idle(smp_processor_id());
+ rcu_cleanup_after_idle();
trace_rcu_dyntick(TPS("End"), oldval, rdtp->dynticks_nesting);
if (!user && !is_idle_task(current)) {
struct task_struct *idle __maybe_unused =
rdtp->dynticks_nesting += DYNTICK_TASK_NEST_VALUE;
} else {
rdtp->dynticks_nesting = DYNTICK_TASK_EXIT_IDLE;
- rcu_eqs_exit_common(rdtp, oldval, user);
+ rcu_eqs_exit_common(oldval, user);
}
}
local_irq_save(flags);
rcu_eqs_exit(false);
- rcu_sysidle_exit(this_cpu_ptr(&rcu_dynticks), 0);
+ rcu_sysidle_exit(0);
local_irq_restore(flags);
}
EXPORT_SYMBOL_GPL(rcu_idle_exit);
if (oldval)
trace_rcu_dyntick(TPS("++="), oldval, rdtp->dynticks_nesting);
else
- rcu_eqs_exit_common(rdtp, oldval, true);
- rcu_sysidle_exit(rdtp, 1);
+ rcu_eqs_exit_common(oldval, true);
+ rcu_sysidle_exit(1);
local_irq_restore(flags);
}
* invoked from the scheduling-clock interrupt. If rcu_pending returns
* false, there is no point in invoking rcu_check_callbacks().
*/
-void rcu_check_callbacks(int cpu, int user)
+void rcu_check_callbacks(int user)
{
trace_rcu_utilization(TPS("Start scheduler-tick"));
increment_cpu_stall_ticks();
rcu_bh_qs();
}
- rcu_preempt_check_callbacks(cpu);
- if (rcu_pending(cpu))
+ rcu_preempt_check_callbacks();
+ if (rcu_pending())
invoke_rcu_core();
if (user)
rcu_note_voluntary_context_switch(current);
*/
void synchronize_sched_expedited(void)
{
+ cpumask_var_t cm;
+ bool cma = false;
+ int cpu;
long firstsnap, s, snap;
int trycount = 0;
struct rcu_state *rsp = &rcu_sched_state;
}
WARN_ON_ONCE(cpu_is_offline(raw_smp_processor_id()));
+ /* Offline CPUs, idle CPUs, and any CPU we run on are quiescent. */
+ cma = zalloc_cpumask_var(&cm, GFP_KERNEL);
+ if (cma) {
+ cpumask_copy(cm, cpu_online_mask);
+ cpumask_clear_cpu(raw_smp_processor_id(), cm);
+ for_each_cpu(cpu, cm) {
+ struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
+
+ if (!(atomic_add_return(0, &rdtp->dynticks) & 0x1))
+ cpumask_clear_cpu(cpu, cm);
+ }
+ if (cpumask_weight(cm) == 0)
+ goto all_cpus_idle;
+ }
+
/*
* Each pass through the following loop attempts to force a
* context switch on each CPU.
*/
- while (try_stop_cpus(cpu_online_mask,
+ while (try_stop_cpus(cma ? cm : cpu_online_mask,
synchronize_sched_expedited_cpu_stop,
NULL) == -EAGAIN) {
put_online_cpus();
/* ensure test happens before caller kfree */
smp_mb__before_atomic(); /* ^^^ */
atomic_long_inc(&rsp->expedited_workdone1);
+ free_cpumask_var(cm);
return;
}
} else {
wait_rcu_gp(call_rcu_sched);
atomic_long_inc(&rsp->expedited_normal);
+ free_cpumask_var(cm);
return;
}
/* ensure test happens before caller kfree */
smp_mb__before_atomic(); /* ^^^ */
atomic_long_inc(&rsp->expedited_workdone2);
+ free_cpumask_var(cm);
return;
}
/* CPU hotplug operation in flight, use normal GP. */
wait_rcu_gp(call_rcu_sched);
atomic_long_inc(&rsp->expedited_normal);
+ free_cpumask_var(cm);
return;
}
snap = atomic_long_read(&rsp->expedited_start);
}
atomic_long_inc(&rsp->expedited_stoppedcpus);
+all_cpus_idle:
+ free_cpumask_var(cm);
+
/*
* Everyone up to our most recent fetch is covered by our grace
* period. Update the counter, but only if our work is still
* by the current CPU, returning 1 if so. This function is part of the
* RCU implementation; it is -not- an exported member of the RCU API.
*/
-static int rcu_pending(int cpu)
+static int rcu_pending(void)
{
struct rcu_state *rsp;
for_each_rcu_flavor(rsp)
- if (__rcu_pending(rsp, per_cpu_ptr(rsp->rda, cpu)))
+ if (__rcu_pending(rsp, this_cpu_ptr(rsp->rda)))
return 1;
return 0;
}
* non-NULL, store an indication of whether all callbacks are lazy.
* (If there are no callbacks, all of them are deemed to be lazy.)
*/
-static int __maybe_unused rcu_cpu_has_callbacks(int cpu, bool *all_lazy)
+static int __maybe_unused rcu_cpu_has_callbacks(bool *all_lazy)
{
bool al = true;
bool hc = false;
struct rcu_state *rsp;
for_each_rcu_flavor(rsp) {
- rdp = per_cpu_ptr(rsp->rda, cpu);
+ rdp = this_cpu_ptr(rsp->rda);
if (!rdp->nxtlist)
continue;
hc = true;
continue;
rdp = per_cpu_ptr(rsp->rda, cpu);
if (rcu_is_nocb_cpu(cpu)) {
- _rcu_barrier_trace(rsp, "OnlineNoCB", cpu,
- rsp->n_barrier_done);
- atomic_inc(&rsp->barrier_cpu_count);
- __call_rcu(&rdp->barrier_head, rcu_barrier_callback,
- rsp, cpu, 0);
+ if (!rcu_nocb_cpu_needs_barrier(rsp, cpu)) {
+ _rcu_barrier_trace(rsp, "OfflineNoCB", cpu,
+ rsp->n_barrier_done);
+ } else {
+ _rcu_barrier_trace(rsp, "OnlineNoCB", cpu,
+ rsp->n_barrier_done);
+ atomic_inc(&rsp->barrier_cpu_count);
+ __call_rcu(&rdp->barrier_head,
+ rcu_barrier_callback, rsp, cpu, 0);
+ }
} else if (ACCESS_ONCE(rdp->qlen)) {
_rcu_barrier_trace(rsp, "OnlineQ", cpu,
rsp->n_barrier_done);
case CPU_DEAD_FROZEN:
case CPU_UP_CANCELED:
case CPU_UP_CANCELED_FROZEN:
- for_each_rcu_flavor(rsp)
+ for_each_rcu_flavor(rsp) {
rcu_cleanup_dead_cpu(cpu, rsp);
+ do_nocb_deferred_wakeup(per_cpu_ptr(rsp->rda, cpu));
+ }
break;
default:
break;
pm_notifier(rcu_pm_notify, 0);
for_each_online_cpu(cpu)
rcu_cpu_notify(NULL, CPU_UP_PREPARE, (void *)(long)cpu);
+
+ rcu_early_boot_tests();
}
#include "tree_plugin.h"
unsigned long expmask; /* Groups that have ->blkd_tasks */
/* elements that need to drain to allow the */
/* current expedited grace period to */
- /* complete (only for TREE_PREEMPT_RCU). */
+ /* complete (only for PREEMPT_RCU). */
unsigned long qsmaskinit;
/* Per-GP initial value for qsmask & expmask. */
unsigned long grpmask; /* Mask to apply to parent qsmask. */
extern struct rcu_state rcu_bh_state;
DECLARE_PER_CPU(struct rcu_data, rcu_bh_data);
-#ifdef CONFIG_TREE_PREEMPT_RCU
+#ifdef CONFIG_PREEMPT_RCU
extern struct rcu_state rcu_preempt_state;
DECLARE_PER_CPU(struct rcu_data, rcu_preempt_data);
-#endif /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+#endif /* #ifdef CONFIG_PREEMPT_RCU */
#ifdef CONFIG_RCU_BOOST
DECLARE_PER_CPU(unsigned int, rcu_cpu_kthread_status);
/* Forward declarations for rcutree_plugin.h */
static void rcu_bootup_announce(void);
long rcu_batches_completed(void);
-static void rcu_preempt_note_context_switch(int cpu);
+static void rcu_preempt_note_context_switch(void);
static int rcu_preempt_blocked_readers_cgp(struct rcu_node *rnp);
#ifdef CONFIG_HOTPLUG_CPU
static void rcu_report_unblock_qs_rnp(struct rcu_node *rnp,
struct rcu_node *rnp,
struct rcu_data *rdp);
#endif /* #ifdef CONFIG_HOTPLUG_CPU */
-static void rcu_preempt_check_callbacks(int cpu);
+static void rcu_preempt_check_callbacks(void);
void call_rcu(struct rcu_head *head, void (*func)(struct rcu_head *rcu));
-#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_TREE_PREEMPT_RCU)
+#if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PREEMPT_RCU)
static void rcu_report_exp_rnp(struct rcu_state *rsp, struct rcu_node *rnp,
bool wake);
-#endif /* #if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_TREE_PREEMPT_RCU) */
+#endif /* #if defined(CONFIG_HOTPLUG_CPU) || defined(CONFIG_PREEMPT_RCU) */
static void __init __rcu_init_preempt(void);
static void rcu_initiate_boost(struct rcu_node *rnp, unsigned long flags);
static void rcu_preempt_boost_start_gp(struct rcu_node *rnp);
#endif /* #ifdef CONFIG_RCU_BOOST */
static void __init rcu_spawn_boost_kthreads(void);
static void rcu_prepare_kthreads(int cpu);
-static void rcu_cleanup_after_idle(int cpu);
-static void rcu_prepare_for_idle(int cpu);
+static void rcu_cleanup_after_idle(void);
+static void rcu_prepare_for_idle(void);
static void rcu_idle_count_callbacks_posted(void);
static void print_cpu_stall_info_begin(void);
static void print_cpu_stall_info(struct rcu_state *rsp, int cpu);
static void print_cpu_stall_info_end(void);
static void zero_cpu_stall_ticks(struct rcu_data *rdp);
static void increment_cpu_stall_ticks(void);
+static bool rcu_nocb_cpu_needs_barrier(struct rcu_state *rsp, int cpu);
static void rcu_nocb_gp_set(struct rcu_node *rnp, int nrq);
static void rcu_nocb_gp_cleanup(struct rcu_state *rsp, struct rcu_node *rnp);
static void rcu_init_one_nocb(struct rcu_node *rnp);
#endif /* #ifdef CONFIG_RCU_NOCB_CPU */
static void __maybe_unused rcu_kick_nohz_cpu(int cpu);
static bool init_nocb_callback_list(struct rcu_data *rdp);
-static void rcu_sysidle_enter(struct rcu_dynticks *rdtp, int irq);
-static void rcu_sysidle_exit(struct rcu_dynticks *rdtp, int irq);
+static void rcu_sysidle_enter(int irq);
+static void rcu_sysidle_exit(int irq);
static void rcu_sysidle_check_cpu(struct rcu_data *rdp, bool *isidle,
unsigned long *maxj);
static bool is_sysidle_rcu_state(struct rcu_state *rsp);
#include <linux/smpboot.h>
#include "../time/tick-internal.h"
-#define RCU_KTHREAD_PRIO 1
-
#ifdef CONFIG_RCU_BOOST
+
#include "../locking/rtmutex_common.h"
-#define RCU_BOOST_PRIO CONFIG_RCU_BOOST_PRIO
-#else
-#define RCU_BOOST_PRIO RCU_KTHREAD_PRIO
-#endif
+
+/* rcuc/rcub kthread realtime priority */
+static int kthread_prio = CONFIG_RCU_KTHREAD_PRIO;
+module_param(kthread_prio, int, 0644);
+
+/*
+ * Control variables for per-CPU and per-rcu_node kthreads. These
+ * handle all flavors of RCU.
+ */
+static DEFINE_PER_CPU(struct task_struct *, rcu_cpu_kthread_task);
+DEFINE_PER_CPU(unsigned int, rcu_cpu_kthread_status);
+DEFINE_PER_CPU(unsigned int, rcu_cpu_kthread_loops);
+DEFINE_PER_CPU(char, rcu_cpu_has_work);
+
+#endif /* #ifdef CONFIG_RCU_BOOST */
#ifdef CONFIG_RCU_NOCB_CPU
static cpumask_var_t rcu_nocb_mask; /* CPUs to have callbacks offloaded. */
#ifdef CONFIG_RCU_TORTURE_TEST_RUNNABLE
pr_info("\tRCU torture testing starts during boot.\n");
#endif
-#if defined(CONFIG_TREE_PREEMPT_RCU) && !defined(CONFIG_RCU_CPU_STALL_VERBOSE)
- pr_info("\tDump stacks of tasks blocking RCU-preempt GP.\n");
-#endif
#if defined(CONFIG_RCU_CPU_STALL_INFO)
pr_info("\tAdditional per-CPU info printed with stalls.\n");
#endif
pr_info("\tBoot-time adjustment of leaf fanout to %d.\n", rcu_fanout_leaf);
if (nr_cpu_ids != NR_CPUS)
pr_info("\tRCU restricting CPUs from NR_CPUS=%d to nr_cpu_ids=%d.\n", NR_CPUS, nr_cpu_ids);
+#ifdef CONFIG_RCU_BOOST
+ pr_info("\tRCU kthread priority: %d.\n", kthread_prio);
+#endif
}
-#ifdef CONFIG_TREE_PREEMPT_RCU
+#ifdef CONFIG_PREEMPT_RCU
RCU_STATE_INITIALIZER(rcu_preempt, 'p', call_rcu);
static struct rcu_state *rcu_state_p = &rcu_preempt_state;
*
* Caller must disable preemption.
*/
-static void rcu_preempt_note_context_switch(int cpu)
+static void rcu_preempt_note_context_switch(void)
{
struct task_struct *t = current;
unsigned long flags;
!t->rcu_read_unlock_special.b.blocked) {
/* Possibly blocking in an RCU read-side critical section. */
- rdp = per_cpu_ptr(rcu_preempt_state.rda, cpu);
+ rdp = this_cpu_ptr(rcu_preempt_state.rda);
rnp = rdp->mynode;
raw_spin_lock_irqsave(&rnp->lock, flags);
smp_mb__after_unlock_lock();
}
}
-#ifdef CONFIG_RCU_CPU_STALL_VERBOSE
-
/*
* Dump detailed information for all tasks blocking the current RCU
* grace period on the specified rcu_node structure.
rcu_print_detail_task_stall_rnp(rnp);
}
-#else /* #ifdef CONFIG_RCU_CPU_STALL_VERBOSE */
-
-static void rcu_print_detail_task_stall(struct rcu_state *rsp)
-{
-}
-
-#endif /* #else #ifdef CONFIG_RCU_CPU_STALL_VERBOSE */
-
#ifdef CONFIG_RCU_CPU_STALL_INFO
static void rcu_print_task_stall_begin(struct rcu_node *rnp)
*
* Caller must disable hard irqs.
*/
-static void rcu_preempt_check_callbacks(int cpu)
+static void rcu_preempt_check_callbacks(void)
{
struct task_struct *t = current;
return;
}
if (t->rcu_read_lock_nesting > 0 &&
- per_cpu(rcu_preempt_data, cpu).qs_pending &&
- !per_cpu(rcu_preempt_data, cpu).passed_quiesce)
+ __this_cpu_read(rcu_preempt_data.qs_pending) &&
+ !__this_cpu_read(rcu_preempt_data.passed_quiesce))
t->rcu_read_unlock_special.b.need_qs = true;
}
__rcu_read_unlock();
}
-#else /* #ifdef CONFIG_TREE_PREEMPT_RCU */
+#else /* #ifdef CONFIG_PREEMPT_RCU */
static struct rcu_state *rcu_state_p = &rcu_sched_state;
* Because preemptible RCU does not exist, we never have to check for
* CPUs being in quiescent states.
*/
-static void rcu_preempt_note_context_switch(int cpu)
+static void rcu_preempt_note_context_switch(void)
{
}
* Because preemptible RCU does not exist, it never has any callbacks
* to check.
*/
-static void rcu_preempt_check_callbacks(int cpu)
+static void rcu_preempt_check_callbacks(void)
{
}
{
}
-#endif /* #else #ifdef CONFIG_TREE_PREEMPT_RCU */
+#endif /* #else #ifdef CONFIG_PREEMPT_RCU */
#ifdef CONFIG_RCU_BOOST
smp_mb__after_unlock_lock();
rnp->boost_kthread_task = t;
raw_spin_unlock_irqrestore(&rnp->lock, flags);
- sp.sched_priority = RCU_BOOST_PRIO;
+ sp.sched_priority = kthread_prio;
sched_setscheduler_nocheck(t, SCHED_FIFO, &sp);
wake_up_process(t); /* get to TASK_INTERRUPTIBLE quickly. */
return 0;
{
struct sched_param sp;
- sp.sched_priority = RCU_KTHREAD_PRIO;
+ sp.sched_priority = kthread_prio;
sched_setscheduler_nocheck(current, SCHED_FIFO, &sp);
}
* any flavor of RCU.
*/
#ifndef CONFIG_RCU_NOCB_CPU_ALL
-int rcu_needs_cpu(int cpu, unsigned long *delta_jiffies)
+int rcu_needs_cpu(unsigned long *delta_jiffies)
{
*delta_jiffies = ULONG_MAX;
- return rcu_cpu_has_callbacks(cpu, NULL);
+ return rcu_cpu_has_callbacks(NULL);
}
#endif /* #ifndef CONFIG_RCU_NOCB_CPU_ALL */
* Because we do not have RCU_FAST_NO_HZ, don't bother cleaning up
* after it.
*/
-static void rcu_cleanup_after_idle(int cpu)
+static void rcu_cleanup_after_idle(void)
{
}
* Do the idle-entry grace-period work, which, because CONFIG_RCU_FAST_NO_HZ=n,
* is nothing.
*/
-static void rcu_prepare_for_idle(int cpu)
+static void rcu_prepare_for_idle(void)
{
}
* The caller must have disabled interrupts.
*/
#ifndef CONFIG_RCU_NOCB_CPU_ALL
-int rcu_needs_cpu(int cpu, unsigned long *dj)
+int rcu_needs_cpu(unsigned long *dj)
{
- struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
+ struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
/* Snapshot to detect later posting of non-lazy callback. */
rdtp->nonlazy_posted_snap = rdtp->nonlazy_posted;
/* If no callbacks, RCU doesn't need the CPU. */
- if (!rcu_cpu_has_callbacks(cpu, &rdtp->all_lazy)) {
+ if (!rcu_cpu_has_callbacks(&rdtp->all_lazy)) {
*dj = ULONG_MAX;
return 0;
}
*
* The caller must have disabled interrupts.
*/
-static void rcu_prepare_for_idle(int cpu)
+static void rcu_prepare_for_idle(void)
{
#ifndef CONFIG_RCU_NOCB_CPU_ALL
bool needwake;
struct rcu_data *rdp;
- struct rcu_dynticks *rdtp = &per_cpu(rcu_dynticks, cpu);
+ struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
struct rcu_node *rnp;
struct rcu_state *rsp;
int tne;
/* Handle nohz enablement switches conservatively. */
tne = ACCESS_ONCE(tick_nohz_active);
if (tne != rdtp->tick_nohz_enabled_snap) {
- if (rcu_cpu_has_callbacks(cpu, NULL))
+ if (rcu_cpu_has_callbacks(NULL))
invoke_rcu_core(); /* force nohz to see update. */
rdtp->tick_nohz_enabled_snap = tne;
return;
return;
/* If this is a no-CBs CPU, no callbacks, just return. */
- if (rcu_is_nocb_cpu(cpu))
+ if (rcu_is_nocb_cpu(smp_processor_id()))
return;
/*
return;
rdtp->last_accelerate = jiffies;
for_each_rcu_flavor(rsp) {
- rdp = per_cpu_ptr(rsp->rda, cpu);
+ rdp = this_cpu_ptr(rsp->rda);
if (!*rdp->nxttail[RCU_DONE_TAIL])
continue;
rnp = rdp->mynode;
* any grace periods that elapsed while the CPU was idle, and if any
* callbacks are now ready to invoke, initiate invocation.
*/
-static void rcu_cleanup_after_idle(int cpu)
+static void rcu_cleanup_after_idle(void)
{
#ifndef CONFIG_RCU_NOCB_CPU_ALL
- if (rcu_is_nocb_cpu(cpu))
+ if (rcu_is_nocb_cpu(smp_processor_id()))
return;
if (rcu_try_advance_all_cbs())
invoke_rcu_core();
}
}
+/*
+ * Does the specified CPU need an RCU callback for the specified flavor
+ * of rcu_barrier()?
+ */
+static bool rcu_nocb_cpu_needs_barrier(struct rcu_state *rsp, int cpu)
+{
+ struct rcu_data *rdp = per_cpu_ptr(rsp->rda, cpu);
+ struct rcu_head *rhp;
+
+ /* No-CBs CPUs might have callbacks on any of three lists. */
+ rhp = ACCESS_ONCE(rdp->nocb_head);
+ if (!rhp)
+ rhp = ACCESS_ONCE(rdp->nocb_gp_head);
+ if (!rhp)
+ rhp = ACCESS_ONCE(rdp->nocb_follower_head);
+
+ /* Having no rcuo kthread but CBs after scheduler starts is bad! */
+ if (!ACCESS_ONCE(rdp->nocb_kthread) && rhp) {
+ /* RCU callback enqueued before CPU first came online??? */
+ pr_err("RCU: Never-onlined no-CBs CPU %d has CB %p\n",
+ cpu, rhp->func);
+ WARN_ON_ONCE(1);
+ }
+
+ return !!rhp;
+}
+
/*
* Enqueue the specified string of rcu_head structures onto the specified
* CPU's no-CBs lists. The CPU is specified by rdp, the head of the
rdp->nocb_leader = rdp_spawn;
if (rdp_last && rdp != rdp_spawn)
rdp_last->nocb_next_follower = rdp;
- rdp_last = rdp;
- rdp = rdp->nocb_next_follower;
- rdp_last->nocb_next_follower = NULL;
+ if (rdp == rdp_spawn) {
+ rdp = rdp->nocb_next_follower;
+ } else {
+ rdp_last = rdp;
+ rdp = rdp->nocb_next_follower;
+ rdp_last->nocb_next_follower = NULL;
+ }
} while (rdp);
rdp_spawn->nocb_next_follower = rdp_old_leader;
}
#else /* #ifdef CONFIG_RCU_NOCB_CPU */
+static bool rcu_nocb_cpu_needs_barrier(struct rcu_state *rsp, int cpu)
+{
+ WARN_ON_ONCE(1); /* Should be dead code. */
+ return false;
+}
+
static void rcu_nocb_gp_cleanup(struct rcu_state *rsp, struct rcu_node *rnp)
{
}
* to detect full-system idle states, not RCU quiescent states and grace
* periods. The caller must have disabled interrupts.
*/
-static void rcu_sysidle_enter(struct rcu_dynticks *rdtp, int irq)
+static void rcu_sysidle_enter(int irq)
{
unsigned long j;
+ struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
/* If there are no nohz_full= CPUs, no need to track this. */
if (!tick_nohz_full_enabled())
* usermode execution does -not- count as idle here! The caller must
* have disabled interrupts.
*/
-static void rcu_sysidle_exit(struct rcu_dynticks *rdtp, int irq)
+static void rcu_sysidle_exit(int irq)
{
+ struct rcu_dynticks *rdtp = this_cpu_ptr(&rcu_dynticks);
+
/* If there are no nohz_full= CPUs, no need to track this. */
if (!tick_nohz_full_enabled())
return;
#else /* #ifdef CONFIG_NO_HZ_FULL_SYSIDLE */
-static void rcu_sysidle_enter(struct rcu_dynticks *rdtp, int irq)
+static void rcu_sysidle_enter(int irq)
{
}
-static void rcu_sysidle_exit(struct rcu_dynticks *rdtp, int irq)
+static void rcu_sysidle_exit(int irq)
{
}
EXPORT_SYMBOL_GPL(rcuhead_debug_descr);
#endif /* #ifdef CONFIG_DEBUG_OBJECTS_RCU_HEAD */
-#if defined(CONFIG_TREE_RCU) || defined(CONFIG_TREE_PREEMPT_RCU) || defined(CONFIG_RCU_TRACE)
+#if defined(CONFIG_TREE_RCU) || defined(CONFIG_PREEMPT_RCU) || defined(CONFIG_RCU_TRACE)
void do_trace_rcu_torture_read(const char *rcutorturename, struct rcu_head *rhp,
unsigned long secs,
unsigned long c_old, unsigned long c)
struct rcu_head *next;
LIST_HEAD(rcu_tasks_holdouts);
- /* FIXME: Add housekeeping affinity. */
+ /* Run on housekeeping CPUs by default. Sysadm can move if desired. */
+ housekeeping_affine(current);
/*
* Each pass through the following loop makes one check for
}
#endif /* #ifdef CONFIG_TASKS_RCU */
+
+#ifdef CONFIG_PROVE_RCU
+
+/*
+ * Early boot self test parameters, one for each flavor
+ */
+static bool rcu_self_test;
+static bool rcu_self_test_bh;
+static bool rcu_self_test_sched;
+
+module_param(rcu_self_test, bool, 0444);
+module_param(rcu_self_test_bh, bool, 0444);
+module_param(rcu_self_test_sched, bool, 0444);
+
+static int rcu_self_test_counter;
+
+static void test_callback(struct rcu_head *r)
+{
+ rcu_self_test_counter++;
+ pr_info("RCU test callback executed %d\n", rcu_self_test_counter);
+}
+
+static void early_boot_test_call_rcu(void)
+{
+ static struct rcu_head head;
+
+ call_rcu(&head, test_callback);
+}
+
+static void early_boot_test_call_rcu_bh(void)
+{
+ static struct rcu_head head;
+
+ call_rcu_bh(&head, test_callback);
+}
+
+static void early_boot_test_call_rcu_sched(void)
+{
+ static struct rcu_head head;
+
+ call_rcu_sched(&head, test_callback);
+}
+
+void rcu_early_boot_tests(void)
+{
+ pr_info("Running RCU self tests\n");
+
+ if (rcu_self_test)
+ early_boot_test_call_rcu();
+ if (rcu_self_test_bh)
+ early_boot_test_call_rcu_bh();
+ if (rcu_self_test_sched)
+ early_boot_test_call_rcu_sched();
+}
+
+static int rcu_verify_early_boot_tests(void)
+{
+ int ret = 0;
+ int early_boot_test_counter = 0;
+
+ if (rcu_self_test) {
+ early_boot_test_counter++;
+ rcu_barrier();
+ }
+ if (rcu_self_test_bh) {
+ early_boot_test_counter++;
+ rcu_barrier_bh();
+ }
+ if (rcu_self_test_sched) {
+ early_boot_test_counter++;
+ rcu_barrier_sched();
+ }
+
+ if (rcu_self_test_counter != early_boot_test_counter) {
+ WARN_ON(1);
+ ret = -1;
+ }
+
+ return ret;
+}
+late_initcall(rcu_verify_early_boot_tests);
+#else
+void rcu_early_boot_tests(void) {}
+#endif /* CONFIG_PROVE_RCU */
*
* This waits to be signaled for completion of a specific task. It is NOT
* interruptible and there is no timeout. The caller is accounted as waiting
- * for IO.
+ * for IO (which traditionally means blkio only).
*/
void __sched wait_for_completion_io(struct completion *x)
{
*
* This waits for either a completion of a specific task to be signaled or for a
* specified timeout to expire. The timeout is in jiffies. It is not
- * interruptible. The caller is accounted as waiting for IO.
+ * interruptible. The caller is accounted as waiting for IO (which traditionally
+ * means blkio only).
*
* Return: 0 if timed out, and positive (at least 1, or number of jiffies left
* till timeout) if completed.
return cpu_curr(task_cpu(p)) == p;
}
+/*
+ * Can drop rq->lock because from sched_class::switched_from() methods drop it.
+ */
static inline void check_class_changed(struct rq *rq, struct task_struct *p,
const struct sched_class *prev_class,
int oldprio)
if (prev_class != p->sched_class) {
if (prev_class->switched_from)
prev_class->switched_from(rq, p);
+ /* Possble rq->lock 'hole'. */
p->sched_class->switched_to(rq, p);
} else if (oldprio != p->prio || dl_task(p))
p->sched_class->prio_changed(rq, p, oldprio);
* ttwu() will sort out the placement.
*/
WARN_ON_ONCE(p->state != TASK_RUNNING && p->state != TASK_WAKING &&
- !(task_preempt_count(p) & PREEMPT_ACTIVE));
+ !p->on_rq);
#ifdef CONFIG_LOCKDEP
/*
static inline
int select_task_rq(struct task_struct *p, int cpu, int sd_flags, int wake_flags)
{
- cpu = p->sched_class->select_task_rq(p, cpu, sd_flags, wake_flags);
+ if (p->nr_cpus_allowed > 1)
+ cpu = p->sched_class->select_task_rq(p, cpu, sd_flags, wake_flags);
/*
* In order not to call set_task_cpu() on a blocking task we need
struct rq *rq = cpu_rq(cpu);
unsigned long flags;
- if (!is_idle_task(rq->curr))
- return;
+ rcu_read_lock();
+
+ if (!is_idle_task(rcu_dereference(rq->curr)))
+ goto out;
if (set_nr_if_polling(rq->idle)) {
trace_sched_wake_idle_without_ipi(cpu);
/* Else cpu is not in idle, do nothing here */
raw_spin_unlock_irqrestore(&rq->lock, flags);
}
+
+out:
+ rcu_read_unlock();
}
bool cpus_share_cache(int this_cpu, int that_cpu)
p->numa_scan_seq = p->mm ? p->mm->numa_scan_seq : 0;
p->numa_scan_period = sysctl_numa_balancing_scan_delay;
p->numa_work.next = &p->numa_work;
- p->numa_faults_memory = NULL;
- p->numa_faults_buffer_memory = NULL;
+ p->numa_faults = NULL;
p->last_task_numa_placement = 0;
p->last_sum_exec_runtime = 0;
- INIT_LIST_HEAD(&p->numa_entry);
p->numa_group = NULL;
#endif /* CONFIG_NUMA_BALANCING */
}
}
#endif
-static inline
-void __dl_clear(struct dl_bw *dl_b, u64 tsk_bw)
-{
- dl_b->total_bw -= tsk_bw;
-}
-
-static inline
-void __dl_add(struct dl_bw *dl_b, u64 tsk_bw)
-{
- dl_b->total_bw += tsk_bw;
-}
-
-static inline
-bool __dl_overflow(struct dl_bw *dl_b, int cpus, u64 old_bw, u64 new_bw)
-{
- return dl_b->bw != -1 &&
- dl_b->bw * cpus < dl_b->total_bw - old_bw + new_bw;
-}
-
/*
* We must be sure that accepting a new task (or allowing changing the
* parameters of an existing one) is consistent with the bandwidth
/**
* finish_task_switch - clean up after a task-switch
- * @rq: runqueue associated with task-switch
* @prev: the thread we just switched away from.
*
* finish_task_switch must be called after the context switch, paired
* so, we finish that here outside of the runqueue lock. (Doing it
* with the lock held can cause deadlocks; see schedule() for
* details.)
+ *
+ * The context switch have flipped the stack from under us and restored the
+ * local variables which were saved when this task called schedule() in the
+ * past. prev == current is still correct but we need to recalculate this_rq
+ * because prev may have moved to another CPU.
*/
-static void finish_task_switch(struct rq *rq, struct task_struct *prev)
+static struct rq *finish_task_switch(struct task_struct *prev)
__releases(rq->lock)
{
+ struct rq *rq = this_rq();
struct mm_struct *mm = rq->prev_mm;
long prev_state;
}
tick_nohz_task_switch(current);
+ return rq;
}
#ifdef CONFIG_SMP
asmlinkage __visible void schedule_tail(struct task_struct *prev)
__releases(rq->lock)
{
- struct rq *rq = this_rq();
-
- finish_task_switch(rq, prev);
+ struct rq *rq;
- /*
- * FIXME: do we need to worry about rq being invalidated by the
- * task_switch?
- */
+ /* finish_task_switch() drops rq->lock and enables preemtion */
+ preempt_disable();
+ rq = finish_task_switch(prev);
post_schedule(rq);
+ preempt_enable();
if (current->set_child_tid)
put_user(task_pid_vnr(current), current->set_child_tid);
}
/*
- * context_switch - switch to the new MM and the new
- * thread's register state.
+ * context_switch - switch to the new MM and the new thread's register state.
*/
-static inline void
+static inline struct rq *
context_switch(struct rq *rq, struct task_struct *prev,
struct task_struct *next)
{
context_tracking_task_switch(prev, next);
/* Here we just switch the register state and the stack. */
switch_to(prev, next, prev);
-
barrier();
- /*
- * this_rq must be evaluated again because prev may have moved
- * CPUs since it called schedule(), thus the 'rq' on its stack
- * frame will be invalid.
- */
- finish_task_switch(this_rq(), prev);
+
+ return finish_task_switch(prev);
}
/*
EXPORT_PER_CPU_SYMBOL(kstat);
EXPORT_PER_CPU_SYMBOL(kernel_cpustat);
-/*
- * Return any ns on the sched_clock that have not yet been accounted in
- * @p in case that task is currently running.
- *
- * Called with task_rq_lock() held on @rq.
- */
-static u64 do_task_delta_exec(struct task_struct *p, struct rq *rq)
-{
- u64 ns = 0;
-
- /*
- * Must be ->curr _and_ ->on_rq. If dequeued, we would
- * project cycles that may never be accounted to this
- * thread, breaking clock_gettime().
- */
- if (task_current(rq, p) && task_on_rq_queued(p)) {
- update_rq_clock(rq);
- ns = rq_clock_task(rq) - p->se.exec_start;
- if ((s64)ns < 0)
- ns = 0;
- }
-
- return ns;
-}
-
-unsigned long long task_delta_exec(struct task_struct *p)
-{
- unsigned long flags;
- struct rq *rq;
- u64 ns = 0;
-
- rq = task_rq_lock(p, &flags);
- ns = do_task_delta_exec(p, rq);
- task_rq_unlock(rq, p, &flags);
-
- return ns;
-}
-
/*
* Return accounted runtime for the task.
* In case the task is currently running, return the runtime plus current's
{
unsigned long flags;
struct rq *rq;
- u64 ns = 0;
+ u64 ns;
#if defined(CONFIG_64BIT) && defined(CONFIG_SMP)
/*
#endif
rq = task_rq_lock(p, &flags);
- ns = p->se.sum_exec_runtime + do_task_delta_exec(p, rq);
+ /*
+ * Must be ->curr _and_ ->on_rq. If dequeued, we would
+ * project cycles that may never be accounted to this
+ * thread, breaking clock_gettime().
+ */
+ if (task_current(rq, p) && task_on_rq_queued(p)) {
+ update_rq_clock(rq);
+ p->sched_class->update_curr(rq);
+ }
+ ns = p->se.sum_exec_runtime;
task_rq_unlock(rq, p, &flags);
return ns;
preempt_disable();
cpu = smp_processor_id();
rq = cpu_rq(cpu);
- rcu_note_context_switch(cpu);
+ rcu_note_context_switch();
prev = rq->curr;
schedule_debug(prev);
rq->curr = next;
++*switch_count;
- context_switch(rq, prev, next); /* unlocks the rq */
- /*
- * The context switch have flipped the stack from under us
- * and restored the local variables which were saved when
- * this task called schedule() in the past. prev == current
- * is still correct, but it can be moved to another cpu/rq.
- */
- cpu = smp_processor_id();
- rq = cpu_rq(cpu);
+ rq = context_switch(rq, prev, next); /* unlocks the rq */
+ cpu = cpu_of(rq);
} else
raw_spin_unlock_irq(&rq->lock);
* or we have been woken up remotely but the IPI has not yet arrived,
* we haven't yet exited the RCU idle mode. Do it here manually until
* we find a better solution.
+ *
+ * NB: There are buggy callers of this function. Ideally we
+ * should warn if prev_state != IN_USER, but that will trigger
+ * too frequently to make sense yet.
*/
- user_exit();
+ enum ctx_state prev_state = exception_enter();
schedule();
- user_enter();
+ exception_exit(prev_state);
}
#endif
}
NOKPROBE_SYMBOL(preempt_schedule);
EXPORT_SYMBOL(preempt_schedule);
+
+#ifdef CONFIG_CONTEXT_TRACKING
+/**
+ * preempt_schedule_context - preempt_schedule called by tracing
+ *
+ * The tracing infrastructure uses preempt_enable_notrace to prevent
+ * recursion and tracing preempt enabling caused by the tracing
+ * infrastructure itself. But as tracing can happen in areas coming
+ * from userspace or just about to enter userspace, a preempt enable
+ * can occur before user_exit() is called. This will cause the scheduler
+ * to be called when the system is still in usermode.
+ *
+ * To prevent this, the preempt_enable_notrace will use this function
+ * instead of preempt_schedule() to exit user context if needed before
+ * calling the scheduler.
+ */
+asmlinkage __visible void __sched notrace preempt_schedule_context(void)
+{
+ enum ctx_state prev_ctx;
+
+ if (likely(!preemptible()))
+ return;
+
+ do {
+ __preempt_count_add(PREEMPT_ACTIVE);
+ /*
+ * Needs preempt disabled in case user_exit() is traced
+ * and the tracer calls preempt_enable_notrace() causing
+ * an infinite recursion.
+ */
+ prev_ctx = exception_enter();
+ __schedule();
+ exception_exit(prev_ctx);
+
+ __preempt_count_sub(PREEMPT_ACTIVE);
+ barrier();
+ } while (need_resched());
+}
+EXPORT_SYMBOL_GPL(preempt_schedule_context);
+#endif /* CONFIG_CONTEXT_TRACKING */
+
#endif /* CONFIG_PREEMPT */
/*
#endif
}
+int cpuset_cpumask_can_shrink(const struct cpumask *cur,
+ const struct cpumask *trial)
+{
+ int ret = 1, trial_cpus;
+ struct dl_bw *cur_dl_b;
+ unsigned long flags;
+
+ rcu_read_lock_sched();
+ cur_dl_b = dl_bw_of(cpumask_any(cur));
+ trial_cpus = cpumask_weight(trial);
+
+ raw_spin_lock_irqsave(&cur_dl_b->lock, flags);
+ if (cur_dl_b->bw != -1 &&
+ cur_dl_b->bw * trial_cpus < cur_dl_b->total_bw)
+ ret = 0;
+ raw_spin_unlock_irqrestore(&cur_dl_b->lock, flags);
+ rcu_read_unlock_sched();
+
+ return ret;
+}
+
+int task_can_attach(struct task_struct *p,
+ const struct cpumask *cs_cpus_allowed)
+{
+ int ret = 0;
+
+ /*
+ * Kthreads which disallow setaffinity shouldn't be moved
+ * to a new cpuset; we don't want to change their cpu
+ * affinity and isolating such threads by their set of
+ * allowed nodes is unnecessary. Thus, cpusets are not
+ * applicable for such threads. This prevents checking for
+ * success of set_cpus_allowed_ptr() on all attached tasks
+ * before cpus_allowed may be changed.
+ */
+ if (p->flags & PF_NO_SETAFFINITY) {
+ ret = -EINVAL;
+ goto out;
+ }
+
+#ifdef CONFIG_SMP
+ if (dl_task(p) && !cpumask_intersects(task_rq(p)->rd->span,
+ cs_cpus_allowed)) {
+ unsigned int dest_cpu = cpumask_any_and(cpu_active_mask,
+ cs_cpus_allowed);
+ struct dl_bw *dl_b;
+ bool overflow;
+ int cpus;
+ unsigned long flags;
+
+ rcu_read_lock_sched();
+ dl_b = dl_bw_of(dest_cpu);
+ raw_spin_lock_irqsave(&dl_b->lock, flags);
+ cpus = dl_bw_cpus(dest_cpu);
+ overflow = __dl_overflow(dl_b, cpus, 0, p->dl.dl_bw);
+ if (overflow)
+ ret = -EBUSY;
+ else {
+ /*
+ * We reserve space for this task in the destination
+ * root_domain, as we can't fail after this point.
+ * We will free resources in the source root_domain
+ * later on (see set_cpus_allowed_dl()).
+ */
+ __dl_add(dl_b, p->dl.dl_bw);
+ }
+ raw_spin_unlock_irqrestore(&dl_b->lock, flags);
+ rcu_read_unlock_sched();
+
+ }
+#endif
+out:
+ return ret;
+}
+
#ifdef CONFIG_SMP
/*
* move_queued_task - move a queued task to new rq.
#ifdef CONFIG_NUMA
static int sched_domains_numa_levels;
+enum numa_topology_type sched_numa_topology_type;
static int *sched_domains_numa_distance;
+int sched_max_numa_distance;
static struct cpumask ***sched_domains_numa_masks;
static int sched_domains_curr_level;
#endif
printk(KERN_WARNING "\n");
}
-static bool find_numa_distance(int distance)
+bool find_numa_distance(int distance)
{
int i;
return false;
}
+/*
+ * A system can have three types of NUMA topology:
+ * NUMA_DIRECT: all nodes are directly connected, or not a NUMA system
+ * NUMA_GLUELESS_MESH: some nodes reachable through intermediary nodes
+ * NUMA_BACKPLANE: nodes can reach other nodes through a backplane
+ *
+ * The difference between a glueless mesh topology and a backplane
+ * topology lies in whether communication between not directly
+ * connected nodes goes through intermediary nodes (where programs
+ * could run), or through backplane controllers. This affects
+ * placement of programs.
+ *
+ * The type of topology can be discerned with the following tests:
+ * - If the maximum distance between any nodes is 1 hop, the system
+ * is directly connected.
+ * - If for two nodes A and B, located N > 1 hops away from each other,
+ * there is an intermediary node C, which is < N hops away from both
+ * nodes A and B, the system is a glueless mesh.
+ */
+static void init_numa_topology_type(void)
+{
+ int a, b, c, n;
+
+ n = sched_max_numa_distance;
+
+ if (n <= 1)
+ sched_numa_topology_type = NUMA_DIRECT;
+
+ for_each_online_node(a) {
+ for_each_online_node(b) {
+ /* Find two nodes furthest removed from each other. */
+ if (node_distance(a, b) < n)
+ continue;
+
+ /* Is there an intermediary node between a and b? */
+ for_each_online_node(c) {
+ if (node_distance(a, c) < n &&
+ node_distance(b, c) < n) {
+ sched_numa_topology_type =
+ NUMA_GLUELESS_MESH;
+ return;
+ }
+ }
+
+ sched_numa_topology_type = NUMA_BACKPLANE;
+ return;
+ }
+ }
+}
+
static void sched_init_numa(void)
{
int next_distance, curr_distance = node_distance(0, 0);
if (!sched_debug())
break;
}
+
+ if (!level)
+ return;
+
/*
* 'level' contains the number of unique distances, excluding the
* identity distance node_distance(i,i).
sched_domain_topology = tl;
sched_domains_numa_levels = level;
+ sched_max_numa_distance = sched_domains_numa_distance[level - 1];
+
+ init_numa_topology_type();
}
static void sched_domains_numa_masks_set(int cpu)
}
void __might_sleep(const char *file, int line, int preempt_offset)
+{
+ /*
+ * Blocking primitives will set (and therefore destroy) current->state,
+ * since we will exit with TASK_RUNNING make sure we enter with it,
+ * otherwise we will destroy state.
+ */
+ if (WARN_ONCE(current->state != TASK_RUNNING,
+ "do not call blocking ops when !TASK_RUNNING; "
+ "state=%lx set at [<%p>] %pS\n",
+ current->state,
+ (void *)current->task_state_change,
+ (void *)current->task_state_change))
+ __set_current_state(TASK_RUNNING);
+
+ ___might_sleep(file, line, preempt_offset);
+}
+EXPORT_SYMBOL(__might_sleep);
+
+void ___might_sleep(const char *file, int line, int preempt_offset)
{
static unsigned long prev_jiffy; /* ratelimiting */
#endif
dump_stack();
}
-EXPORT_SYMBOL(__might_sleep);
+EXPORT_SYMBOL(___might_sleep);
#endif
#ifdef CONFIG_MAGIC_SYSRQ
if (unlikely(running))
put_prev_task(rq, tsk);
- tg = container_of(task_css_check(tsk, cpu_cgrp_id,
- lockdep_is_held(&tsk->sighand->siglock)),
+ /*
+ * All callers are synchronized by task_rq_lock(); we do not use RCU
+ * which is pointless here. Thus, we pass "true" to task_css_check()
+ * to prevent lockdep warnings.
+ */
+ tg = container_of(task_css_check(tsk, cpu_cgrp_id, true),
struct task_group, css);
tg = autogroup_task_group(tsk, tg);
tsk->sched_task_group = tg;
sched_offline_group(tg);
}
+static void cpu_cgroup_fork(struct task_struct *task)
+{
+ sched_move_task(task);
+}
+
static int cpu_cgroup_can_attach(struct cgroup_subsys_state *css,
struct cgroup_taskset *tset)
{
.css_free = cpu_cgroup_css_free,
.css_online = cpu_cgroup_css_online,
.css_offline = cpu_cgroup_css_offline,
+ .fork = cpu_cgroup_fork,
.can_attach = cpu_cgroup_can_attach,
.attach = cpu_cgroup_attach,
.exit = cpu_cgroup_exit,
void cpudl_set(struct cpudl *cp, int cpu, u64 dl, int is_valid);
int cpudl_init(struct cpudl *cp);
void cpudl_cleanup(struct cpudl *cp);
-#else
-#define cpudl_set(cp, cpu, dl) do { } while (0)
-#define cpudl_init() do { } while (0)
#endif /* CONFIG_SMP */
#endif /* _LINUX_CPUDL_H */
void cpupri_set(struct cpupri *cp, int cpu, int pri);
int cpupri_init(struct cpupri *cp);
void cpupri_cleanup(struct cpupri *cp);
-#else
-#define cpupri_set(cp, cpu, pri) do { } while (0)
-#define cpupri_init() do { } while (0)
#endif
#endif /* _LINUX_CPUPRI_H */
}
/*
- * We need to take care of a possible races here. In fact, the
- * task might have changed its scheduling policy to something
- * different from SCHED_DEADLINE or changed its reservation
- * parameters (through sched_setattr()).
+ * We need to take care of several possible races here:
+ *
+ * - the task might have changed its scheduling policy
+ * to something different than SCHED_DEADLINE
+ * - the task might have changed its reservation parameters
+ * (through sched_setattr())
+ * - the task might have been boosted by someone else and
+ * might be in the boosting/deboosting path
+ *
+ * In all this cases we bail out, as the task is already
+ * in the runqueue or is going to be enqueued back anyway.
*/
- if (!dl_task(p) || dl_se->dl_new)
+ if (!dl_task(p) || dl_se->dl_new ||
+ dl_se->dl_boosted || !dl_se->dl_throttled)
goto unlock;
sched_clock_tick();
dl_se->dl_yielded = 0;
if (task_on_rq_queued(p)) {
enqueue_task_dl(rq, p, ENQUEUE_REPLENISH);
- if (task_has_dl_policy(rq->curr))
+ if (dl_task(rq->curr))
check_preempt_curr_dl(rq, p, 0);
else
resched_curr(rq);
{
struct hrtimer *timer = &dl_se->dl_timer;
- if (hrtimer_active(timer)) {
- hrtimer_try_to_cancel(timer);
- return;
- }
-
hrtimer_init(timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
timer->function = dl_task_timer;
}
sched_rt_avg_update(rq, delta_exec);
- dl_se->runtime -= delta_exec;
+ dl_se->runtime -= dl_se->dl_yielded ? 0 : delta_exec;
if (dl_runtime_exceeded(rq, dl_se)) {
__dequeue_task_dl(rq, curr, 0);
if (likely(start_dl_timer(dl_se, curr->dl.dl_boosted)))
* smaller than our one... OTW we keep our runtime and
* deadline.
*/
- if (pi_task && p->dl.dl_boosted && dl_prio(pi_task->normal_prio))
+ if (pi_task && p->dl.dl_boosted && dl_prio(pi_task->normal_prio)) {
pi_se = &pi_task->dl;
+ } else if (!dl_prio(p->normal_prio)) {
+ /*
+ * Special case in which we have a !SCHED_DEADLINE task
+ * that is going to be deboosted, but exceedes its
+ * runtime while doing so. No point in replenishing
+ * it, as it's going to return back to its original
+ * scheduling class after this.
+ */
+ BUG_ON(!p->dl.dl_boosted || flags != ENQUEUE_REPLENISH);
+ return;
+ }
/*
* If p is throttled, we do nothing. In fact, if it exhausted
struct task_struct *curr;
struct rq *rq;
- if (sd_flag != SD_BALANCE_WAKE && sd_flag != SD_BALANCE_FORK)
+ if (sd_flag != SD_BALANCE_WAKE)
goto out;
rq = cpu_rq(cpu);
{
hrtick_start(rq, p->dl.runtime);
}
+#else /* !CONFIG_SCHED_HRTICK */
+static void start_hrtick_dl(struct rq *rq, struct task_struct *p)
+{
+}
#endif
static struct sched_dl_entity *pick_next_dl_entity(struct rq *rq,
/* Running task will never be pushed. */
dequeue_pushable_dl_task(rq, p);
-#ifdef CONFIG_SCHED_HRTICK
if (hrtick_enabled(rq))
start_hrtick_dl(rq, p);
-#endif
set_post_schedule(rq);
{
update_curr_dl(rq);
-#ifdef CONFIG_SCHED_HRTICK
if (hrtick_enabled(rq) && queued && p->dl.runtime > 0)
start_hrtick_dl(rq, p);
-#endif
}
static void task_fork_dl(struct task_struct *p)
{
struct task_struct *next_task;
struct rq *later_rq;
+ int ret = 0;
if (!rq->dl.overloaded)
return 0;
* The task is still there. We don't try
* again, some other cpu will pull it when ready.
*/
- dequeue_pushable_dl_task(rq, next_task);
goto out;
}
deactivate_task(rq, next_task, 0);
set_task_cpu(next_task, later_rq->cpu);
activate_task(later_rq, next_task, 0);
+ ret = 1;
resched_curr(later_rq);
out:
put_task_struct(next_task);
- return 1;
+ return ret;
}
static void push_dl_tasks(struct rq *rq)
p->nr_cpus_allowed > 1 &&
dl_task(rq->curr) &&
(rq->curr->nr_cpus_allowed < 2 ||
- dl_entity_preempt(&rq->curr->dl, &p->dl))) {
+ !dl_entity_preempt(&p->dl, &rq->curr->dl))) {
push_dl_tasks(rq);
}
}
const struct cpumask *new_mask)
{
struct rq *rq;
+ struct root_domain *src_rd;
int weight;
BUG_ON(!dl_task(p));
+ rq = task_rq(p);
+ src_rd = rq->rd;
+ /*
+ * Migrating a SCHED_DEADLINE task between exclusive
+ * cpusets (different root_domains) entails a bandwidth
+ * update. We already made space for us in the destination
+ * domain (see cpuset_can_attach()).
+ */
+ if (!cpumask_intersects(src_rd->span, new_mask)) {
+ struct dl_bw *src_dl_b;
+
+ src_dl_b = dl_bw_of(cpu_of(rq));
+ /*
+ * We now free resources of the root_domain we are migrating
+ * off. In the worst case, sched_setattr() may temporary fail
+ * until we complete the update.
+ */
+ raw_spin_lock(&src_dl_b->lock);
+ __dl_clear(src_dl_b, p->dl.dl_bw);
+ raw_spin_unlock(&src_dl_b->lock);
+ }
+
/*
* Update only if the task is actually running (i.e.,
* it is on the rq AND it is not throttled).
if ((p->nr_cpus_allowed > 1) == (weight > 1))
return;
- rq = task_rq(p);
-
/*
* The process used to be able to migrate OR it can now migrate
*/
#endif /* CONFIG_SMP */
+/*
+ * Ensure p's dl_timer is cancelled. May drop rq->lock for a while.
+ */
+static void cancel_dl_timer(struct rq *rq, struct task_struct *p)
+{
+ struct hrtimer *dl_timer = &p->dl.dl_timer;
+
+ /* Nobody will change task's class if pi_lock is held */
+ lockdep_assert_held(&p->pi_lock);
+
+ if (hrtimer_active(dl_timer)) {
+ int ret = hrtimer_try_to_cancel(dl_timer);
+
+ if (unlikely(ret == -1)) {
+ /*
+ * Note, p may migrate OR new deadline tasks
+ * may appear in rq when we are unlocking it.
+ * A caller of us must be fine with that.
+ */
+ raw_spin_unlock(&rq->lock);
+ hrtimer_cancel(dl_timer);
+ raw_spin_lock(&rq->lock);
+ }
+ }
+}
+
static void switched_from_dl(struct rq *rq, struct task_struct *p)
{
- if (hrtimer_active(&p->dl.dl_timer) && !dl_policy(p->policy))
- hrtimer_try_to_cancel(&p->dl.dl_timer);
+ cancel_dl_timer(rq, p);
__dl_clear_params(p);
-#ifdef CONFIG_SMP
/*
* Since this might be the only -deadline task on the rq,
* this is the right place to try to pull some other one
* from an overloaded cpu, if any.
*/
- if (!rq->dl.dl_nr_running)
- pull_dl_task(rq);
-#endif
+ if (!task_on_rq_queued(p) || rq->dl.dl_nr_running)
+ return;
+
+ if (pull_dl_task(rq))
+ resched_curr(rq);
}
/*
if (task_on_rq_queued(p) && rq->curr != p) {
#ifdef CONFIG_SMP
- if (rq->dl.overloaded && push_dl_task(rq) && rq != task_rq(p))
+ if (p->nr_cpus_allowed > 1 && rq->dl.overloaded &&
+ push_dl_task(rq) && rq != task_rq(p))
/* Only reschedule if pushing failed */
check_resched = 0;
#endif /* CONFIG_SMP */
- if (check_resched && task_has_dl_policy(rq->curr))
- check_preempt_curr_dl(rq, p, 0);
+ if (check_resched) {
+ if (dl_task(rq->curr))
+ check_preempt_curr_dl(rq, p, 0);
+ else
+ resched_curr(rq);
+ }
}
}
.prio_changed = prio_changed_dl,
.switched_from = switched_from_dl,
.switched_to = switched_to_dl,
+
+ .update_curr = update_curr_dl,
};
+
+#ifdef CONFIG_SCHED_DEBUG
+extern void print_dl_rq(struct seq_file *m, int cpu, struct dl_rq *dl_rq);
+
+void print_dl_stats(struct seq_file *m, int cpu)
+{
+ print_dl_rq(m, cpu, &cpu_rq(cpu)->dl);
+}
+#endif /* CONFIG_SCHED_DEBUG */
#undef P
}
+void print_dl_rq(struct seq_file *m, int cpu, struct dl_rq *dl_rq)
+{
+ SEQ_printf(m, "\ndl_rq[%d]:\n", cpu);
+ SEQ_printf(m, " .%-30s: %ld\n", "dl_nr_running", dl_rq->dl_nr_running);
+}
+
extern __read_mostly int sched_clock_running;
static void print_cpu(struct seq_file *m, int cpu)
spin_lock_irqsave(&sched_debug_lock, flags);
print_cfs_stats(m, cpu);
print_rt_stats(m, cpu);
+ print_dl_stats(m, cpu);
print_rq(m, rq, cpu);
spin_unlock_irqrestore(&sched_debug_lock, flags);
unsigned long nr_faults = -1;
int cpu_current, home_node;
- if (p->numa_faults_memory)
- nr_faults = p->numa_faults_memory[2*node + i];
+ if (p->numa_faults)
+ nr_faults = p->numa_faults[2*node + i];
cpu_current = !i ? (task_node(p) == node) :
(pol && node_isset(node, pol->v.nodes));
account_cfs_rq_runtime(cfs_rq, delta_exec);
}
+static void update_curr_fair(struct rq *rq)
+{
+ update_curr(cfs_rq_of(&rq->curr->se));
+}
+
static inline void
update_stats_wait_start(struct cfs_rq *cfs_rq, struct sched_entity *se)
{
static unsigned int task_scan_min(struct task_struct *p)
{
+ unsigned int scan_size = ACCESS_ONCE(sysctl_numa_balancing_scan_size);
unsigned int scan, floor;
unsigned int windows = 1;
- if (sysctl_numa_balancing_scan_size < MAX_SCAN_WINDOW)
- windows = MAX_SCAN_WINDOW / sysctl_numa_balancing_scan_size;
+ if (scan_size < MAX_SCAN_WINDOW)
+ windows = MAX_SCAN_WINDOW / scan_size;
floor = 1000 / windows;
scan = sysctl_numa_balancing_scan_period_min / task_nr_scan_windows(p);
spinlock_t lock; /* nr_tasks, tasks */
int nr_tasks;
pid_t gid;
- struct list_head task_list;
struct rcu_head rcu;
nodemask_t active_nodes;
return p->numa_group ? p->numa_group->gid : 0;
}
-static inline int task_faults_idx(int nid, int priv)
+/*
+ * The averaged statistics, shared & private, memory & cpu,
+ * occupy the first half of the array. The second half of the
+ * array is for current counters, which are averaged into the
+ * first set by task_numa_placement.
+ */
+static inline int task_faults_idx(enum numa_faults_stats s, int nid, int priv)
{
- return NR_NUMA_HINT_FAULT_TYPES * nid + priv;
+ return NR_NUMA_HINT_FAULT_TYPES * (s * nr_node_ids + nid) + priv;
}
static inline unsigned long task_faults(struct task_struct *p, int nid)
{
- if (!p->numa_faults_memory)
+ if (!p->numa_faults)
return 0;
- return p->numa_faults_memory[task_faults_idx(nid, 0)] +
- p->numa_faults_memory[task_faults_idx(nid, 1)];
+ return p->numa_faults[task_faults_idx(NUMA_MEM, nid, 0)] +
+ p->numa_faults[task_faults_idx(NUMA_MEM, nid, 1)];
}
static inline unsigned long group_faults(struct task_struct *p, int nid)
if (!p->numa_group)
return 0;
- return p->numa_group->faults[task_faults_idx(nid, 0)] +
- p->numa_group->faults[task_faults_idx(nid, 1)];
+ return p->numa_group->faults[task_faults_idx(NUMA_MEM, nid, 0)] +
+ p->numa_group->faults[task_faults_idx(NUMA_MEM, nid, 1)];
}
static inline unsigned long group_faults_cpu(struct numa_group *group, int nid)
{
- return group->faults_cpu[task_faults_idx(nid, 0)] +
- group->faults_cpu[task_faults_idx(nid, 1)];
+ return group->faults_cpu[task_faults_idx(NUMA_MEM, nid, 0)] +
+ group->faults_cpu[task_faults_idx(NUMA_MEM, nid, 1)];
+}
+
+/* Handle placement on systems where not all nodes are directly connected. */
+static unsigned long score_nearby_nodes(struct task_struct *p, int nid,
+ int maxdist, bool task)
+{
+ unsigned long score = 0;
+ int node;
+
+ /*
+ * All nodes are directly connected, and the same distance
+ * from each other. No need for fancy placement algorithms.
+ */
+ if (sched_numa_topology_type == NUMA_DIRECT)
+ return 0;
+
+ /*
+ * This code is called for each node, introducing N^2 complexity,
+ * which should be ok given the number of nodes rarely exceeds 8.
+ */
+ for_each_online_node(node) {
+ unsigned long faults;
+ int dist = node_distance(nid, node);
+
+ /*
+ * The furthest away nodes in the system are not interesting
+ * for placement; nid was already counted.
+ */
+ if (dist == sched_max_numa_distance || node == nid)
+ continue;
+
+ /*
+ * On systems with a backplane NUMA topology, compare groups
+ * of nodes, and move tasks towards the group with the most
+ * memory accesses. When comparing two nodes at distance
+ * "hoplimit", only nodes closer by than "hoplimit" are part
+ * of each group. Skip other nodes.
+ */
+ if (sched_numa_topology_type == NUMA_BACKPLANE &&
+ dist > maxdist)
+ continue;
+
+ /* Add up the faults from nearby nodes. */
+ if (task)
+ faults = task_faults(p, node);
+ else
+ faults = group_faults(p, node);
+
+ /*
+ * On systems with a glueless mesh NUMA topology, there are
+ * no fixed "groups of nodes". Instead, nodes that are not
+ * directly connected bounce traffic through intermediate
+ * nodes; a numa_group can occupy any set of nodes.
+ * The further away a node is, the less the faults count.
+ * This seems to result in good task placement.
+ */
+ if (sched_numa_topology_type == NUMA_GLUELESS_MESH) {
+ faults *= (sched_max_numa_distance - dist);
+ faults /= (sched_max_numa_distance - LOCAL_DISTANCE);
+ }
+
+ score += faults;
+ }
+
+ return score;
}
/*
* larger multiplier, in order to group tasks together that are almost
* evenly spread out between numa nodes.
*/
-static inline unsigned long task_weight(struct task_struct *p, int nid)
+static inline unsigned long task_weight(struct task_struct *p, int nid,
+ int dist)
{
- unsigned long total_faults;
+ unsigned long faults, total_faults;
- if (!p->numa_faults_memory)
+ if (!p->numa_faults)
return 0;
total_faults = p->total_numa_faults;
if (!total_faults)
return 0;
- return 1000 * task_faults(p, nid) / total_faults;
+ faults = task_faults(p, nid);
+ faults += score_nearby_nodes(p, nid, dist, true);
+
+ return 1000 * faults / total_faults;
}
-static inline unsigned long group_weight(struct task_struct *p, int nid)
+static inline unsigned long group_weight(struct task_struct *p, int nid,
+ int dist)
{
- if (!p->numa_group || !p->numa_group->total_faults)
+ unsigned long faults, total_faults;
+
+ if (!p->numa_group)
+ return 0;
+
+ total_faults = p->numa_group->total_faults;
+
+ if (!total_faults)
return 0;
- return 1000 * group_faults(p, nid) / p->numa_group->total_faults;
+ faults = group_faults(p, nid);
+ faults += score_nearby_nodes(p, nid, dist, false);
+
+ return 1000 * faults / total_faults;
}
bool should_numa_migrate_memory(struct task_struct *p, struct page * page,
struct numa_stats src_stats, dst_stats;
int imbalance_pct;
+ int dist;
struct task_struct *best_task;
long best_imp;
long load;
long imp = env->p->numa_group ? groupimp : taskimp;
long moveimp = imp;
+ int dist = env->dist;
rcu_read_lock();
- cur = ACCESS_ONCE(dst_rq->curr);
- if (cur->pid == 0) /* idle */
+
+ raw_spin_lock_irq(&dst_rq->lock);
+ cur = dst_rq->curr;
+ /*
+ * No need to move the exiting task, and this ensures that ->curr
+ * wasn't reaped and thus get_task_struct() in task_numa_assign()
+ * is safe under RCU read lock.
+ * Note that rcu_read_lock() itself can't protect from the final
+ * put_task_struct() after the last schedule().
+ */
+ if ((cur->flags & PF_EXITING) || is_idle_task(cur))
cur = NULL;
+ raw_spin_unlock_irq(&dst_rq->lock);
+
+ /*
+ * Because we have preemption enabled we can get migrated around and
+ * end try selecting ourselves (current == env->p) as a swap candidate.
+ */
+ if (cur == env->p)
+ goto unlock;
/*
* "imp" is the fault differential for the source task between the
* in any group then look only at task weights.
*/
if (cur->numa_group == env->p->numa_group) {
- imp = taskimp + task_weight(cur, env->src_nid) -
- task_weight(cur, env->dst_nid);
+ imp = taskimp + task_weight(cur, env->src_nid, dist) -
+ task_weight(cur, env->dst_nid, dist);
/*
* Add some hysteresis to prevent swapping the
* tasks within a group over tiny differences.
* instead.
*/
if (cur->numa_group)
- imp += group_weight(cur, env->src_nid) -
- group_weight(cur, env->dst_nid);
+ imp += group_weight(cur, env->src_nid, dist) -
+ group_weight(cur, env->dst_nid, dist);
else
- imp += task_weight(cur, env->src_nid) -
- task_weight(cur, env->dst_nid);
+ imp += task_weight(cur, env->src_nid, dist) -
+ task_weight(cur, env->dst_nid, dist);
}
}
};
struct sched_domain *sd;
unsigned long taskweight, groupweight;
- int nid, ret;
+ int nid, ret, dist;
long taskimp, groupimp;
/*
return -EINVAL;
}
- taskweight = task_weight(p, env.src_nid);
- groupweight = group_weight(p, env.src_nid);
- update_numa_stats(&env.src_stats, env.src_nid);
env.dst_nid = p->numa_preferred_nid;
- taskimp = task_weight(p, env.dst_nid) - taskweight;
- groupimp = group_weight(p, env.dst_nid) - groupweight;
+ dist = env.dist = node_distance(env.src_nid, env.dst_nid);
+ taskweight = task_weight(p, env.src_nid, dist);
+ groupweight = group_weight(p, env.src_nid, dist);
+ update_numa_stats(&env.src_stats, env.src_nid);
+ taskimp = task_weight(p, env.dst_nid, dist) - taskweight;
+ groupimp = group_weight(p, env.dst_nid, dist) - groupweight;
update_numa_stats(&env.dst_stats, env.dst_nid);
/* Try to find a spot on the preferred nid. */
task_numa_find_cpu(&env, taskimp, groupimp);
- /* No space available on the preferred nid. Look elsewhere. */
- if (env.best_cpu == -1) {
+ /*
+ * Look at other nodes in these cases:
+ * - there is no space available on the preferred_nid
+ * - the task is part of a numa_group that is interleaved across
+ * multiple NUMA nodes; in order to better consolidate the group,
+ * we need to check other locations.
+ */
+ if (env.best_cpu == -1 || (p->numa_group &&
+ nodes_weight(p->numa_group->active_nodes) > 1)) {
for_each_online_node(nid) {
if (nid == env.src_nid || nid == p->numa_preferred_nid)
continue;
+ dist = node_distance(env.src_nid, env.dst_nid);
+ if (sched_numa_topology_type == NUMA_BACKPLANE &&
+ dist != env.dist) {
+ taskweight = task_weight(p, env.src_nid, dist);
+ groupweight = group_weight(p, env.src_nid, dist);
+ }
+
/* Only consider nodes where both task and groups benefit */
- taskimp = task_weight(p, nid) - taskweight;
- groupimp = group_weight(p, nid) - groupweight;
+ taskimp = task_weight(p, nid, dist) - taskweight;
+ groupimp = group_weight(p, nid, dist) - groupweight;
if (taskimp < 0 && groupimp < 0)
continue;
+ env.dist = dist;
env.dst_nid = nid;
update_numa_stats(&env.dst_stats, env.dst_nid);
task_numa_find_cpu(&env, taskimp, groupimp);
unsigned long interval = HZ;
/* This task has no NUMA fault statistics yet */
- if (unlikely(p->numa_preferred_nid == -1 || !p->numa_faults_memory))
+ if (unlikely(p->numa_preferred_nid == -1 || !p->numa_faults))
return;
/* Periodically retry migrating the task to the preferred node */
* scanning faster if shared accesses dominate as it may
* simply bounce migrations uselessly
*/
- ratio = DIV_ROUND_UP(private * NUMA_PERIOD_SLOTS, (private + shared));
+ ratio = DIV_ROUND_UP(private * NUMA_PERIOD_SLOTS, (private + shared + 1));
diff = (diff * ratio) / NUMA_PERIOD_SLOTS;
}
return delta;
}
+/*
+ * Determine the preferred nid for a task in a numa_group. This needs to
+ * be done in a way that produces consistent results with group_weight,
+ * otherwise workloads might not converge.
+ */
+static int preferred_group_nid(struct task_struct *p, int nid)
+{
+ nodemask_t nodes;
+ int dist;
+
+ /* Direct connections between all NUMA nodes. */
+ if (sched_numa_topology_type == NUMA_DIRECT)
+ return nid;
+
+ /*
+ * On a system with glueless mesh NUMA topology, group_weight
+ * scores nodes according to the number of NUMA hinting faults on
+ * both the node itself, and on nearby nodes.
+ */
+ if (sched_numa_topology_type == NUMA_GLUELESS_MESH) {
+ unsigned long score, max_score = 0;
+ int node, max_node = nid;
+
+ dist = sched_max_numa_distance;
+
+ for_each_online_node(node) {
+ score = group_weight(p, node, dist);
+ if (score > max_score) {
+ max_score = score;
+ max_node = node;
+ }
+ }
+ return max_node;
+ }
+
+ /*
+ * Finding the preferred nid in a system with NUMA backplane
+ * interconnect topology is more involved. The goal is to locate
+ * tasks from numa_groups near each other in the system, and
+ * untangle workloads from different sides of the system. This requires
+ * searching down the hierarchy of node groups, recursively searching
+ * inside the highest scoring group of nodes. The nodemask tricks
+ * keep the complexity of the search down.
+ */
+ nodes = node_online_map;
+ for (dist = sched_max_numa_distance; dist > LOCAL_DISTANCE; dist--) {
+ unsigned long max_faults = 0;
+ nodemask_t max_group;
+ int a, b;
+
+ /* Are there nodes at this distance from each other? */
+ if (!find_numa_distance(dist))
+ continue;
+
+ for_each_node_mask(a, nodes) {
+ unsigned long faults = 0;
+ nodemask_t this_group;
+ nodes_clear(this_group);
+
+ /* Sum group's NUMA faults; includes a==b case. */
+ for_each_node_mask(b, nodes) {
+ if (node_distance(a, b) < dist) {
+ faults += group_faults(p, b);
+ node_set(b, this_group);
+ node_clear(b, nodes);
+ }
+ }
+
+ /* Remember the top group. */
+ if (faults > max_faults) {
+ max_faults = faults;
+ max_group = this_group;
+ /*
+ * subtle: at the smallest distance there is
+ * just one node left in each "group", the
+ * winner is the preferred nid.
+ */
+ nid = a;
+ }
+ }
+ /* Next round, evaluate the nodes within max_group. */
+ nodes = max_group;
+ }
+ return nid;
+}
+
static void task_numa_placement(struct task_struct *p)
{
int seq, nid, max_nid = -1, max_group_nid = -1;
/* Find the node with the highest number of faults */
for_each_online_node(nid) {
+ /* Keep track of the offsets in numa_faults array */
+ int mem_idx, membuf_idx, cpu_idx, cpubuf_idx;
unsigned long faults = 0, group_faults = 0;
- int priv, i;
+ int priv;
for (priv = 0; priv < NR_NUMA_HINT_FAULT_TYPES; priv++) {
long diff, f_diff, f_weight;
- i = task_faults_idx(nid, priv);
+ mem_idx = task_faults_idx(NUMA_MEM, nid, priv);
+ membuf_idx = task_faults_idx(NUMA_MEMBUF, nid, priv);
+ cpu_idx = task_faults_idx(NUMA_CPU, nid, priv);
+ cpubuf_idx = task_faults_idx(NUMA_CPUBUF, nid, priv);
/* Decay existing window, copy faults since last scan */
- diff = p->numa_faults_buffer_memory[i] - p->numa_faults_memory[i] / 2;
- fault_types[priv] += p->numa_faults_buffer_memory[i];
- p->numa_faults_buffer_memory[i] = 0;
+ diff = p->numa_faults[membuf_idx] - p->numa_faults[mem_idx] / 2;
+ fault_types[priv] += p->numa_faults[membuf_idx];
+ p->numa_faults[membuf_idx] = 0;
/*
* Normalize the faults_from, so all tasks in a group
* faults are less important.
*/
f_weight = div64_u64(runtime << 16, period + 1);
- f_weight = (f_weight * p->numa_faults_buffer_cpu[i]) /
+ f_weight = (f_weight * p->numa_faults[cpubuf_idx]) /
(total_faults + 1);
- f_diff = f_weight - p->numa_faults_cpu[i] / 2;
- p->numa_faults_buffer_cpu[i] = 0;
+ f_diff = f_weight - p->numa_faults[cpu_idx] / 2;
+ p->numa_faults[cpubuf_idx] = 0;
- p->numa_faults_memory[i] += diff;
- p->numa_faults_cpu[i] += f_diff;
- faults += p->numa_faults_memory[i];
+ p->numa_faults[mem_idx] += diff;
+ p->numa_faults[cpu_idx] += f_diff;
+ faults += p->numa_faults[mem_idx];
p->total_numa_faults += diff;
if (p->numa_group) {
- /* safe because we can only change our own group */
- p->numa_group->faults[i] += diff;
- p->numa_group->faults_cpu[i] += f_diff;
+ /*
+ * safe because we can only change our own group
+ *
+ * mem_idx represents the offset for a given
+ * nid and priv in a specific region because it
+ * is at the beginning of the numa_faults array.
+ */
+ p->numa_group->faults[mem_idx] += diff;
+ p->numa_group->faults_cpu[mem_idx] += f_diff;
p->numa_group->total_faults += diff;
- group_faults += p->numa_group->faults[i];
+ group_faults += p->numa_group->faults[mem_idx];
}
}
if (p->numa_group) {
update_numa_active_node_mask(p->numa_group);
spin_unlock_irq(group_lock);
- max_nid = max_group_nid;
+ max_nid = preferred_group_nid(p, max_group_nid);
}
if (max_faults) {
atomic_set(&grp->refcount, 1);
spin_lock_init(&grp->lock);
- INIT_LIST_HEAD(&grp->task_list);
grp->gid = p->pid;
/* Second half of the array tracks nids where faults happen */
grp->faults_cpu = grp->faults + NR_NUMA_HINT_FAULT_TYPES *
node_set(task_node(current), grp->active_nodes);
for (i = 0; i < NR_NUMA_HINT_FAULT_STATS * nr_node_ids; i++)
- grp->faults[i] = p->numa_faults_memory[i];
+ grp->faults[i] = p->numa_faults[i];
grp->total_faults = p->total_numa_faults;
- list_add(&p->numa_entry, &grp->task_list);
grp->nr_tasks++;
rcu_assign_pointer(p->numa_group, grp);
}
double_lock_irq(&my_grp->lock, &grp->lock);
for (i = 0; i < NR_NUMA_HINT_FAULT_STATS * nr_node_ids; i++) {
- my_grp->faults[i] -= p->numa_faults_memory[i];
- grp->faults[i] += p->numa_faults_memory[i];
+ my_grp->faults[i] -= p->numa_faults[i];
+ grp->faults[i] += p->numa_faults[i];
}
my_grp->total_faults -= p->total_numa_faults;
grp->total_faults += p->total_numa_faults;
- list_move(&p->numa_entry, &grp->task_list);
my_grp->nr_tasks--;
grp->nr_tasks++;
void task_numa_free(struct task_struct *p)
{
struct numa_group *grp = p->numa_group;
- void *numa_faults = p->numa_faults_memory;
+ void *numa_faults = p->numa_faults;
unsigned long flags;
int i;
if (grp) {
spin_lock_irqsave(&grp->lock, flags);
for (i = 0; i < NR_NUMA_HINT_FAULT_STATS * nr_node_ids; i++)
- grp->faults[i] -= p->numa_faults_memory[i];
+ grp->faults[i] -= p->numa_faults[i];
grp->total_faults -= p->total_numa_faults;
- list_del(&p->numa_entry);
grp->nr_tasks--;
spin_unlock_irqrestore(&grp->lock, flags);
RCU_INIT_POINTER(p->numa_group, NULL);
put_numa_group(grp);
}
- p->numa_faults_memory = NULL;
- p->numa_faults_buffer_memory = NULL;
- p->numa_faults_cpu= NULL;
- p->numa_faults_buffer_cpu = NULL;
+ p->numa_faults = NULL;
kfree(numa_faults);
}
return;
/* Allocate buffer to track faults on a per-node basis */
- if (unlikely(!p->numa_faults_memory)) {
- int size = sizeof(*p->numa_faults_memory) *
+ if (unlikely(!p->numa_faults)) {
+ int size = sizeof(*p->numa_faults) *
NR_NUMA_HINT_FAULT_BUCKETS * nr_node_ids;
- p->numa_faults_memory = kzalloc(size, GFP_KERNEL|__GFP_NOWARN);
- if (!p->numa_faults_memory)
+ p->numa_faults = kzalloc(size, GFP_KERNEL|__GFP_NOWARN);
+ if (!p->numa_faults)
return;
- BUG_ON(p->numa_faults_buffer_memory);
- /*
- * The averaged statistics, shared & private, memory & cpu,
- * occupy the first half of the array. The second half of the
- * array is for current counters, which are averaged into the
- * first set by task_numa_placement.
- */
- p->numa_faults_cpu = p->numa_faults_memory + (2 * nr_node_ids);
- p->numa_faults_buffer_memory = p->numa_faults_memory + (4 * nr_node_ids);
- p->numa_faults_buffer_cpu = p->numa_faults_memory + (6 * nr_node_ids);
p->total_numa_faults = 0;
memset(p->numa_faults_locality, 0, sizeof(p->numa_faults_locality));
}
if (migrated)
p->numa_pages_migrated += pages;
- p->numa_faults_buffer_memory[task_faults_idx(mem_node, priv)] += pages;
- p->numa_faults_buffer_cpu[task_faults_idx(cpu_node, priv)] += pages;
+ p->numa_faults[task_faults_idx(NUMA_MEMBUF, mem_node, priv)] += pages;
+ p->numa_faults[task_faults_idx(NUMA_CPUBUF, cpu_node, priv)] += pages;
p->numa_faults_locality[local] += pages;
}
latest_idle_timestamp = rq->idle_stamp;
shallowest_idle_cpu = i;
}
- } else {
+ } else if (shallowest_idle_cpu == -1) {
load = weighted_cpuload(i);
if (load < min_load || (load == min_load && i == this_cpu)) {
min_load = load;
int want_affine = 0;
int sync = wake_flags & WF_SYNC;
- if (p->nr_cpus_allowed == 1)
- return prev_cpu;
-
if (sd_flag & SD_BALANCE_WAKE)
want_affine = cpumask_test_cpu(cpu, tsk_cpus_allowed(p));
struct numa_group *numa_group = rcu_dereference(p->numa_group);
int src_nid, dst_nid;
- if (!sched_feat(NUMA_FAVOUR_HIGHER) || !p->numa_faults_memory ||
+ if (!sched_feat(NUMA_FAVOUR_HIGHER) || !p->numa_faults ||
!(env->sd->flags & SD_NUMA)) {
return false;
}
if (!sched_feat(NUMA) || !sched_feat(NUMA_RESIST_LOWER))
return false;
- if (!p->numa_faults_memory || !(env->sd->flags & SD_NUMA))
+ if (!p->numa_faults || !(env->sd->flags & SD_NUMA))
return false;
src_nid = cpu_to_node(env->src_cpu);
* with a large weight task outweighs the tasks on the system).
*/
if (prefer_sibling && sds->local &&
- sds->local_stat.group_has_free_capacity)
+ sds->local_stat.group_has_free_capacity) {
sgs->group_capacity_factor = min(sgs->group_capacity_factor, 1U);
+ sgs->group_type = group_classify(sg, sgs);
+ }
if (update_sd_pick_busiest(env, sds, sg, sgs)) {
sds->busiest = sg;
.get_rr_interval = get_rr_interval_fair,
+ .update_curr = update_curr_fair,
+
#ifdef CONFIG_FAIR_GROUP_SCHED
.task_move_group = task_move_group_fair,
#endif
return 0;
}
+static void update_curr_idle(struct rq *rq)
+{
+}
+
/*
* Simple, special scheduling class for the per-CPU idle tasks:
*/
.prio_changed = prio_changed_idle,
.switched_to = switched_to_idle,
+ .update_curr = update_curr_idle,
};
struct task_struct *curr;
struct rq *rq;
- if (p->nr_cpus_allowed == 1)
- goto out;
-
/* For anything but wake ups, just return the task_cpu */
if (sd_flag != SD_BALANCE_WAKE && sd_flag != SD_BALANCE_FORK)
goto out;
static void check_preempt_equal_prio(struct rq *rq, struct task_struct *p)
{
- if (rq->curr->nr_cpus_allowed == 1)
+ /*
+ * Current can't be migrated, useless to reschedule,
+ * let's hope p can move out.
+ */
+ if (rq->curr->nr_cpus_allowed == 1 ||
+ !cpupri_find(&rq->rd->cpupri, rq->curr, NULL))
return;
+ /*
+ * p is migratable, so let's not schedule it and
+ * see if it is pushed or pulled somewhere else.
+ */
if (p->nr_cpus_allowed != 1
&& cpupri_find(&rq->rd->cpupri, p, NULL))
return;
- if (!cpupri_find(&rq->rd->cpupri, rq->curr, NULL))
- return;
-
/*
* There appears to be other cpus that can accept
* current and none to run 'p', so lets reschedule
.prio_changed = prio_changed_rt,
.switched_to = switched_to_rt,
+
+ .update_curr = update_curr_rt,
};
#ifdef CONFIG_SCHED_DEBUG
u64 bw, total_bw;
};
+static inline
+void __dl_clear(struct dl_bw *dl_b, u64 tsk_bw)
+{
+ dl_b->total_bw -= tsk_bw;
+}
+
+static inline
+void __dl_add(struct dl_bw *dl_b, u64 tsk_bw)
+{
+ dl_b->total_bw += tsk_bw;
+}
+
+static inline
+bool __dl_overflow(struct dl_bw *dl_b, int cpus, u64 old_bw, u64 new_bw)
+{
+ return dl_b->bw != -1 &&
+ dl_b->bw * cpus < dl_b->total_bw - old_bw + new_bw;
+}
+
extern struct mutex sched_domains_mutex;
#ifdef CONFIG_CGROUP_SCHED
return rq->clock_task;
}
+#ifdef CONFIG_NUMA
+enum numa_topology_type {
+ NUMA_DIRECT,
+ NUMA_GLUELESS_MESH,
+ NUMA_BACKPLANE,
+};
+extern enum numa_topology_type sched_numa_topology_type;
+extern int sched_max_numa_distance;
+extern bool find_numa_distance(int distance);
+#endif
+
#ifdef CONFIG_NUMA_BALANCING
+/* The regions in numa_faults array from task_struct */
+enum numa_faults_stats {
+ NUMA_MEM = 0,
+ NUMA_CPU,
+ NUMA_MEMBUF,
+ NUMA_CPUBUF
+};
extern void sched_setnuma(struct task_struct *p, int node);
extern int migrate_task_to(struct task_struct *p, int cpu);
extern int migrate_swap(struct task_struct *, struct task_struct *);
void (*task_fork) (struct task_struct *p);
void (*task_dead) (struct task_struct *p);
+ /*
+ * The switched_from() call is allowed to drop rq->lock, therefore we
+ * cannot assume the switched_from/switched_to pair is serliazed by
+ * rq->lock. They are however serialized by p->pi_lock.
+ */
void (*switched_from) (struct rq *this_rq, struct task_struct *task);
void (*switched_to) (struct rq *this_rq, struct task_struct *task);
void (*prio_changed) (struct rq *this_rq, struct task_struct *task,
unsigned int (*get_rr_interval) (struct rq *rq,
struct task_struct *task);
+ void (*update_curr) (struct rq *rq);
+
#ifdef CONFIG_FAIR_GROUP_SCHED
void (*task_move_group) (struct task_struct *p, int on_rq);
#endif
extern struct sched_entity *__pick_last_entity(struct cfs_rq *cfs_rq);
extern void print_cfs_stats(struct seq_file *m, int cpu);
extern void print_rt_stats(struct seq_file *m, int cpu);
+extern void print_dl_stats(struct seq_file *m, int cpu);
extern void init_cfs_rq(struct cfs_rq *cfs_rq);
extern void init_rt_rq(struct rt_rq *rt_rq, struct rq *rq);
return 0;
}
+static void update_curr_stop(struct rq *rq)
+{
+}
+
/*
* Simple, special scheduling class for the per-CPU stop tasks:
*/
.prio_changed = prio_changed_stop,
.switched_to = switched_to_stop,
+ .update_curr = update_curr_stop,
};
#include <linux/mm.h>
#include <linux/wait.h>
#include <linux/hash.h>
+#include <linux/kthread.h>
void __init_waitqueue_head(wait_queue_head_t *q, const char *name, struct lock_class_key *key)
{
}
EXPORT_SYMBOL(autoremove_wake_function);
+static inline bool is_kthread_should_stop(void)
+{
+ return (current->flags & PF_KTHREAD) && kthread_should_stop();
+}
+
+/*
+ * DEFINE_WAIT_FUNC(wait, woken_wake_func);
+ *
+ * add_wait_queue(&wq, &wait);
+ * for (;;) {
+ * if (condition)
+ * break;
+ *
+ * p->state = mode; condition = true;
+ * smp_mb(); // A smp_wmb(); // C
+ * if (!wait->flags & WQ_FLAG_WOKEN) wait->flags |= WQ_FLAG_WOKEN;
+ * schedule() try_to_wake_up();
+ * p->state = TASK_RUNNING; ~~~~~~~~~~~~~~~~~~
+ * wait->flags &= ~WQ_FLAG_WOKEN; condition = true;
+ * smp_mb() // B smp_wmb(); // C
+ * wait->flags |= WQ_FLAG_WOKEN;
+ * }
+ * remove_wait_queue(&wq, &wait);
+ *
+ */
+long wait_woken(wait_queue_t *wait, unsigned mode, long timeout)
+{
+ set_current_state(mode); /* A */
+ /*
+ * The above implies an smp_mb(), which matches with the smp_wmb() from
+ * woken_wake_function() such that if we observe WQ_FLAG_WOKEN we must
+ * also observe all state before the wakeup.
+ */
+ if (!(wait->flags & WQ_FLAG_WOKEN) && !is_kthread_should_stop())
+ timeout = schedule_timeout(timeout);
+ __set_current_state(TASK_RUNNING);
+
+ /*
+ * The below implies an smp_mb(), it too pairs with the smp_wmb() from
+ * woken_wake_function() such that we must either observe the wait
+ * condition being true _OR_ WQ_FLAG_WOKEN such that we will not miss
+ * an event.
+ */
+ set_mb(wait->flags, wait->flags & ~WQ_FLAG_WOKEN); /* B */
+
+ return timeout;
+}
+EXPORT_SYMBOL(wait_woken);
+
+int woken_wake_function(wait_queue_t *wait, unsigned mode, int sync, void *key)
+{
+ /*
+ * Although this function is called under waitqueue lock, LOCK
+ * doesn't imply write barrier and the users expects write
+ * barrier semantics on wakeup functions. The following
+ * smp_wmb() is equivalent to smp_wmb() in try_to_wake_up()
+ * and is paired with set_mb() in wait_woken().
+ */
+ smp_wmb(); /* C */
+ wait->flags |= WQ_FLAG_WOKEN;
+
+ return default_wake_function(wait, mode, sync, key);
+}
+EXPORT_SYMBOL(woken_wake_function);
+
int wake_bit_function(wait_queue_t *wait, unsigned mode, int sync, void *arg)
{
struct wait_bit_key *key = arg;
local_irq_restore(*flags);
break;
}
-
+ /*
+ * This sighand can be already freed and even reused, but
+ * we rely on SLAB_DESTROY_BY_RCU and sighand_ctor() which
+ * initializes ->siglock: this slab can't go away, it has
+ * the same object type, ->siglock can't be reinitialized.
+ *
+ * We need to ensure that tsk->sighand is still the same
+ * after we take the lock, we can race with de_thread() or
+ * __exit_signal(). In the latter case the next iteration
+ * must see ->sighand == NULL.
+ */
spin_lock(&sighand->siglock);
if (likely(sighand == tsk->sighand)) {
rcu_read_unlock();
int error = -ESRCH;
struct task_struct *p;
- rcu_read_lock();
-retry:
- p = pid_task(pid, PIDTYPE_PID);
- if (p) {
- error = group_send_sig_info(sig, info, p);
- if (unlikely(error == -ESRCH))
- /*
- * The task was unhashed in between, try again.
- * If it is dead, pid_task() will return NULL,
- * if we race with de_thread() it will find the
- * new leader.
- */
- goto retry;
- }
- rcu_read_unlock();
+ for (;;) {
+ rcu_read_lock();
+ p = pid_task(pid, PIDTYPE_PID);
+ if (p)
+ error = group_send_sig_info(sig, info, p);
+ rcu_read_unlock();
+ if (likely(!p || error != -ESRCH))
+ return error;
- return error;
+ /*
+ * The task was unhashed in between, try again. If it
+ * is dead, pid_task() will return NULL, if we race with
+ * de_thread() it will find the new leader.
+ */
+ }
}
int kill_proc_info(int sig, struct siginfo *info, pid_t pid)
set_current_state(TASK_INTERRUPTIBLE);
preempt_disable();
if (kthread_should_stop()) {
- set_current_state(TASK_RUNNING);
+ __set_current_state(TASK_RUNNING);
preempt_enable();
if (ht->cleanup)
ht->cleanup(td->cpu, cpu_online(td->cpu));
/* Check for state change setup */
switch (td->status) {
case HP_THREAD_NONE:
+ __set_current_state(TASK_RUNNING);
preempt_enable();
if (ht->setup)
ht->setup(td->cpu);
td->status = HP_THREAD_ACTIVE;
- preempt_disable();
- break;
+ continue;
+
case HP_THREAD_PARKED:
+ __set_current_state(TASK_RUNNING);
preempt_enable();
if (ht->unpark)
ht->unpark(td->cpu);
td->status = HP_THREAD_ACTIVE;
- preempt_disable();
- break;
+ continue;
}
if (!ht->thread_should_run(td->cpu)) {
- preempt_enable();
+ preempt_enable_no_resched();
schedule();
} else {
- set_current_state(TASK_RUNNING);
+ __set_current_state(TASK_RUNNING);
preempt_enable();
ht->thread_fn(td->cpu);
}
* in the task stack here.
*/
__do_softirq();
- rcu_note_context_switch(cpu);
+ rcu_note_context_switch();
local_irq_enable();
cond_resched();
return;
.data = &sysctl_numa_balancing_scan_size,
.maxlen = sizeof(unsigned int),
.mode = 0644,
- .proc_handler = proc_dointvec,
+ .proc_handler = proc_dointvec_minmax,
+ .extra1 = &one,
},
{
.procname = "numa_balancing",
obj-$(CONFIG_TICK_ONESHOT) += tick-sched.o
obj-$(CONFIG_TIMER_STATS) += timer_stats.o
obj-$(CONFIG_DEBUG_FS) += timekeeping_debug.o
-obj-$(CONFIG_TEST_UDELAY) += udelay_test.o
+obj-$(CONFIG_TEST_UDELAY) += test_udelay.o
$(obj)/time.o: $(obj)/timeconst.h
* Also omit the add if it would overflow the u64 boundary.
*/
if ((~0ULL - clc > rnd) &&
- (!ismax || evt->mult <= (1U << evt->shift)))
+ (!ismax || evt->mult <= (1ULL << evt->shift)))
clc += rnd;
do_div(clc, evt->mult);
*sample = cputime_to_expires(cputime.utime);
break;
case CPUCLOCK_SCHED:
- *sample = cputime.sum_exec_runtime + task_delta_exec(p);
+ *sample = cputime.sum_exec_runtime;
break;
}
return 0;
goto out;
}
} else {
+ memset(&event.sigev_value, 0, sizeof(event.sigev_value));
event.sigev_notify = SIGEV_SIGNAL;
event.sigev_signo = SIGALRM;
event.sigev_value.sival_int = new_timer->it_id;
--- /dev/null
+/*
+ * udelay() test kernel module
+ *
+ * Test is executed by writing and reading to /sys/kernel/debug/udelay_test
+ * Tests are configured by writing: USECS ITERATIONS
+ * Tests are executed by reading from the same file.
+ * Specifying usecs of 0 or negative values will run multiples tests.
+ *
+ * Copyright (C) 2014 Google, Inc.
+ *
+ * This software is licensed under the terms of the GNU General Public
+ * License version 2, as published by the Free Software Foundation, and
+ * may be copied, distributed, and modified under those terms.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/ktime.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+
+#define DEFAULT_ITERATIONS 100
+
+#define DEBUGFS_FILENAME "udelay_test"
+
+static DEFINE_MUTEX(udelay_test_lock);
+static struct dentry *udelay_test_debugfs_file;
+static int udelay_test_usecs;
+static int udelay_test_iterations = DEFAULT_ITERATIONS;
+
+static int udelay_test_single(struct seq_file *s, int usecs, uint32_t iters)
+{
+ int min = 0, max = 0, fail_count = 0;
+ uint64_t sum = 0;
+ uint64_t avg;
+ int i;
+ /* Allow udelay to be up to 0.5% fast */
+ int allowed_error_ns = usecs * 5;
+
+ for (i = 0; i < iters; ++i) {
+ struct timespec ts1, ts2;
+ int time_passed;
+
+ ktime_get_ts(&ts1);
+ udelay(usecs);
+ ktime_get_ts(&ts2);
+ time_passed = timespec_to_ns(&ts2) - timespec_to_ns(&ts1);
+
+ if (i == 0 || time_passed < min)
+ min = time_passed;
+ if (i == 0 || time_passed > max)
+ max = time_passed;
+ if ((time_passed + allowed_error_ns) / 1000 < usecs)
+ ++fail_count;
+ WARN_ON(time_passed < 0);
+ sum += time_passed;
+ }
+
+ avg = sum;
+ do_div(avg, iters);
+ seq_printf(s, "%d usecs x %d: exp=%d allowed=%d min=%d avg=%lld max=%d",
+ usecs, iters, usecs * 1000,
+ (usecs * 1000) - allowed_error_ns, min, avg, max);
+ if (fail_count)
+ seq_printf(s, " FAIL=%d", fail_count);
+ seq_puts(s, "\n");
+
+ return 0;
+}
+
+static int udelay_test_show(struct seq_file *s, void *v)
+{
+ int usecs;
+ int iters;
+ int ret = 0;
+
+ mutex_lock(&udelay_test_lock);
+ usecs = udelay_test_usecs;
+ iters = udelay_test_iterations;
+ mutex_unlock(&udelay_test_lock);
+
+ if (usecs > 0 && iters > 0) {
+ return udelay_test_single(s, usecs, iters);
+ } else if (usecs == 0) {
+ struct timespec ts;
+
+ ktime_get_ts(&ts);
+ seq_printf(s, "udelay() test (lpj=%ld kt=%ld.%09ld)\n",
+ loops_per_jiffy, ts.tv_sec, ts.tv_nsec);
+ seq_puts(s, "usage:\n");
+ seq_puts(s, "echo USECS [ITERS] > " DEBUGFS_FILENAME "\n");
+ seq_puts(s, "cat " DEBUGFS_FILENAME "\n");
+ }
+
+ return ret;
+}
+
+static int udelay_test_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, udelay_test_show, inode->i_private);
+}
+
+static ssize_t udelay_test_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *pos)
+{
+ char lbuf[32];
+ int ret;
+ int usecs;
+ int iters;
+
+ if (count >= sizeof(lbuf))
+ return -EINVAL;
+
+ if (copy_from_user(lbuf, buf, count))
+ return -EFAULT;
+ lbuf[count] = '\0';
+
+ ret = sscanf(lbuf, "%d %d", &usecs, &iters);
+ if (ret < 1)
+ return -EINVAL;
+ else if (ret < 2)
+ iters = DEFAULT_ITERATIONS;
+
+ mutex_lock(&udelay_test_lock);
+ udelay_test_usecs = usecs;
+ udelay_test_iterations = iters;
+ mutex_unlock(&udelay_test_lock);
+
+ return count;
+}
+
+static const struct file_operations udelay_test_debugfs_ops = {
+ .owner = THIS_MODULE,
+ .open = udelay_test_open,
+ .read = seq_read,
+ .write = udelay_test_write,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+
+static int __init udelay_test_init(void)
+{
+ mutex_lock(&udelay_test_lock);
+ udelay_test_debugfs_file = debugfs_create_file(DEBUGFS_FILENAME,
+ S_IRUSR, NULL, NULL, &udelay_test_debugfs_ops);
+ mutex_unlock(&udelay_test_lock);
+
+ return 0;
+}
+
+module_init(udelay_test_init);
+
+static void __exit udelay_test_exit(void)
+{
+ mutex_lock(&udelay_test_lock);
+ debugfs_remove(udelay_test_debugfs_file);
+ mutex_unlock(&udelay_test_lock);
+}
+
+module_exit(udelay_test_exit);
+
+MODULE_AUTHOR("David Riley <davidriley@chromium.org>");
+MODULE_LICENSE("GPL");
last_jiffies = jiffies;
} while (read_seqretry(&jiffies_lock, seq));
- if (rcu_needs_cpu(cpu, &rcu_delta_jiffies) ||
+ if (rcu_needs_cpu(&rcu_delta_jiffies) ||
arch_needs_cpu() || irq_work_needs_cpu()) {
next_jiffies = last_jiffies + 1;
delta_jiffies = 1;
}
EXPORT_SYMBOL(timespec_trunc);
-/* Converts Gregorian date to seconds since 1970-01-01 00:00:00.
+/*
+ * mktime64 - Converts date to seconds.
+ * Converts Gregorian date to seconds since 1970-01-01 00:00:00.
* Assumes input in normal date format, i.e. 1980-12-31 23:59:59
* => year=1980, mon=12, day=31, hour=23, min=59, sec=59.
*
* -year/100+year/400 terms, and add 10.]
*
* This algorithm was first published by Gauss (I think).
- *
- * WARNING: this function will overflow on 2106-02-07 06:28:16 on
- * machines where long is 32-bit! (However, as time_t is signed, we
- * will already get problems at other places on 2038-01-19 03:14:08)
*/
-unsigned long
-mktime(const unsigned int year0, const unsigned int mon0,
- const unsigned int day, const unsigned int hour,
- const unsigned int min, const unsigned int sec)
+time64_t mktime64(const unsigned int year0, const unsigned int mon0,
+ const unsigned int day, const unsigned int hour,
+ const unsigned int min, const unsigned int sec)
{
unsigned int mon = mon0, year = year0;
year -= 1;
}
- return ((((unsigned long)
+ return ((((time64_t)
(year/4 - year/100 + year/400 + 367*mon/12 + day) +
year*365 - 719499
)*24 + hour /* now have hours */
)*60 + min /* now have minutes */
)*60 + sec; /* finally seconds */
}
-
-EXPORT_SYMBOL(mktime);
+EXPORT_SYMBOL(mktime64);
/**
* set_normalized_timespec - set timespec sec and nsec parts and normalize
/**
* getnstimeofday64 - Returns the time of day in a timespec64.
- * @ts: pointer to the timespec to be set
+ * @ts: pointer to the timespec64 to be set
*
- * Returns the time of day in a timespec (WARN if suspended).
+ * Returns the time of day in a timespec64 (WARN if suspended).
*/
void getnstimeofday64(struct timespec64 *ts)
{
*
* The function calculates the monotonic clock from the realtime
* clock and the wall_to_monotonic offset and stores the result
- * in normalized timespec format in the variable pointed to by @ts.
+ * in normalized timespec64 format in the variable pointed to by @ts.
*/
void ktime_get_ts64(struct timespec64 *ts)
{
EXPORT_SYMBOL(do_gettimeofday);
/**
- * do_settimeofday - Sets the time of day
- * @tv: pointer to the timespec variable containing the new time
+ * do_settimeofday64 - Sets the time of day.
+ * @ts: pointer to the timespec64 variable containing the new time
*
* Sets the time of day to the new time and update NTP and notify hrtimers
*/
-int do_settimeofday(const struct timespec *tv)
+int do_settimeofday64(const struct timespec64 *ts)
{
struct timekeeper *tk = &tk_core.timekeeper;
- struct timespec64 ts_delta, xt, tmp;
+ struct timespec64 ts_delta, xt;
unsigned long flags;
- if (!timespec_valid_strict(tv))
+ if (!timespec64_valid_strict(ts))
return -EINVAL;
raw_spin_lock_irqsave(&timekeeper_lock, flags);
timekeeping_forward_now(tk);
xt = tk_xtime(tk);
- ts_delta.tv_sec = tv->tv_sec - xt.tv_sec;
- ts_delta.tv_nsec = tv->tv_nsec - xt.tv_nsec;
+ ts_delta.tv_sec = ts->tv_sec - xt.tv_sec;
+ ts_delta.tv_nsec = ts->tv_nsec - xt.tv_nsec;
tk_set_wall_to_mono(tk, timespec64_sub(tk->wall_to_monotonic, ts_delta));
- tmp = timespec_to_timespec64(*tv);
- tk_set_xtime(tk, &tmp);
+ tk_set_xtime(tk, ts);
timekeeping_update(tk, TK_CLEAR_NTP | TK_MIRROR | TK_CLOCK_WAS_SET);
return 0;
}
-EXPORT_SYMBOL(do_settimeofday);
+EXPORT_SYMBOL(do_settimeofday64);
/**
* timekeeping_inject_offset - Adds or subtracts from the current time.
}
/**
- * getrawmonotonic - Returns the raw monotonic time in a timespec
- * @ts: pointer to the timespec to be set
+ * getrawmonotonic64 - Returns the raw monotonic time in a timespec
+ * @ts: pointer to the timespec64 to be set
*
* Returns the raw monotonic time (completely un-modified by ntp)
*/
-void getrawmonotonic(struct timespec *ts)
+void getrawmonotonic64(struct timespec64 *ts)
{
struct timekeeper *tk = &tk_core.timekeeper;
struct timespec64 ts64;
} while (read_seqcount_retry(&tk_core.seq, seq));
timespec64_add_ns(&ts64, nsecs);
- *ts = timespec64_to_timespec(ts64);
+ *ts = ts64;
}
-EXPORT_SYMBOL(getrawmonotonic);
+EXPORT_SYMBOL(getrawmonotonic64);
+
/**
* timekeeping_valid_for_hres - Check if timekeeping is suitable for hres
}
/**
- * timekeeping_inject_sleeptime - Adds suspend interval to timeekeeping values
- * @delta: pointer to a timespec delta value
+ * timekeeping_inject_sleeptime64 - Adds suspend interval to timeekeeping values
+ * @delta: pointer to a timespec64 delta value
*
* This hook is for architectures that cannot support read_persistent_clock
* because their RTC/persistent clock is only accessible when irqs are enabled.
* This function should only be called by rtc_resume(), and allows
* a suspend offset to be injected into the timekeeping values.
*/
-void timekeeping_inject_sleeptime(struct timespec *delta)
+void timekeeping_inject_sleeptime64(struct timespec64 *delta)
{
struct timekeeper *tk = &tk_core.timekeeper;
- struct timespec64 tmp;
unsigned long flags;
/*
timekeeping_forward_now(tk);
- tmp = timespec_to_timespec64(*delta);
- __timekeeping_inject_sleeptime(tk, &tmp);
+ __timekeeping_inject_sleeptime(tk, delta);
timekeeping_update(tk, TK_CLEAR_NTP | TK_MIRROR | TK_CLOCK_WAS_SET);
*
* XXX - TODO: Doc ntp_error calculation.
*/
+ if ((mult_adj > 0) && (tk->tkr.mult + mult_adj < mult_adj)) {
+ /* NTP adjustment caused clocksource mult overflow */
+ WARN_ON_ONCE(1);
+ return;
+ }
+
tk->tkr.mult += mult_adj;
tk->xtime_interval += interval;
tk->tkr.xtime_nsec -= offset;
}
if (unlikely(tk->tkr.clock->maxadj &&
- (tk->tkr.mult > tk->tkr.clock->mult + tk->tkr.clock->maxadj))) {
+ (abs(tk->tkr.mult - tk->tkr.clock->mult)
+ > tk->tkr.clock->maxadj))) {
printk_once(KERN_WARNING
"Adjusting %s more than 11%% (%ld vs %ld)\n",
tk->tkr.clock->name, (long)tk->tkr.mult,
}
EXPORT_SYMBOL(current_kernel_time);
-struct timespec get_monotonic_coarse(void)
+struct timespec64 get_monotonic_coarse64(void)
{
struct timekeeper *tk = &tk_core.timekeeper;
struct timespec64 now, mono;
set_normalized_timespec64(&now, now.tv_sec + mono.tv_sec,
now.tv_nsec + mono.tv_nsec);
- return timespec64_to_timespec(now);
+ return now;
}
/*
void update_process_times(int user_tick)
{
struct task_struct *p = current;
- int cpu = smp_processor_id();
/* Note: this timer irq context must be accounted for as well. */
account_process_tick(p, user_tick);
run_local_timers();
- rcu_check_callbacks(cpu, user_tick);
+ rcu_check_callbacks(user_tick);
#ifdef CONFIG_IRQ_WORK
if (in_irq())
irq_work_tick();
+++ /dev/null
-/*
- * udelay() test kernel module
- *
- * Test is executed by writing and reading to /sys/kernel/debug/udelay_test
- * Tests are configured by writing: USECS ITERATIONS
- * Tests are executed by reading from the same file.
- * Specifying usecs of 0 or negative values will run multiples tests.
- *
- * Copyright (C) 2014 Google, Inc.
- *
- * This software is licensed under the terms of the GNU General Public
- * License version 2, as published by the Free Software Foundation, and
- * may be copied, distributed, and modified under those terms.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-
-#include <linux/debugfs.h>
-#include <linux/delay.h>
-#include <linux/ktime.h>
-#include <linux/module.h>
-#include <linux/uaccess.h>
-
-#define DEFAULT_ITERATIONS 100
-
-#define DEBUGFS_FILENAME "udelay_test"
-
-static DEFINE_MUTEX(udelay_test_lock);
-static struct dentry *udelay_test_debugfs_file;
-static int udelay_test_usecs;
-static int udelay_test_iterations = DEFAULT_ITERATIONS;
-
-static int udelay_test_single(struct seq_file *s, int usecs, uint32_t iters)
-{
- int min = 0, max = 0, fail_count = 0;
- uint64_t sum = 0;
- uint64_t avg;
- int i;
- /* Allow udelay to be up to 0.5% fast */
- int allowed_error_ns = usecs * 5;
-
- for (i = 0; i < iters; ++i) {
- struct timespec ts1, ts2;
- int time_passed;
-
- ktime_get_ts(&ts1);
- udelay(usecs);
- ktime_get_ts(&ts2);
- time_passed = timespec_to_ns(&ts2) - timespec_to_ns(&ts1);
-
- if (i == 0 || time_passed < min)
- min = time_passed;
- if (i == 0 || time_passed > max)
- max = time_passed;
- if ((time_passed + allowed_error_ns) / 1000 < usecs)
- ++fail_count;
- WARN_ON(time_passed < 0);
- sum += time_passed;
- }
-
- avg = sum;
- do_div(avg, iters);
- seq_printf(s, "%d usecs x %d: exp=%d allowed=%d min=%d avg=%lld max=%d",
- usecs, iters, usecs * 1000,
- (usecs * 1000) - allowed_error_ns, min, avg, max);
- if (fail_count)
- seq_printf(s, " FAIL=%d", fail_count);
- seq_puts(s, "\n");
-
- return 0;
-}
-
-static int udelay_test_show(struct seq_file *s, void *v)
-{
- int usecs;
- int iters;
- int ret = 0;
-
- mutex_lock(&udelay_test_lock);
- usecs = udelay_test_usecs;
- iters = udelay_test_iterations;
- mutex_unlock(&udelay_test_lock);
-
- if (usecs > 0 && iters > 0) {
- return udelay_test_single(s, usecs, iters);
- } else if (usecs == 0) {
- struct timespec ts;
-
- ktime_get_ts(&ts);
- seq_printf(s, "udelay() test (lpj=%ld kt=%ld.%09ld)\n",
- loops_per_jiffy, ts.tv_sec, ts.tv_nsec);
- seq_puts(s, "usage:\n");
- seq_puts(s, "echo USECS [ITERS] > " DEBUGFS_FILENAME "\n");
- seq_puts(s, "cat " DEBUGFS_FILENAME "\n");
- }
-
- return ret;
-}
-
-static int udelay_test_open(struct inode *inode, struct file *file)
-{
- return single_open(file, udelay_test_show, inode->i_private);
-}
-
-static ssize_t udelay_test_write(struct file *file, const char __user *buf,
- size_t count, loff_t *pos)
-{
- char lbuf[32];
- int ret;
- int usecs;
- int iters;
-
- if (count >= sizeof(lbuf))
- return -EINVAL;
-
- if (copy_from_user(lbuf, buf, count))
- return -EFAULT;
- lbuf[count] = '\0';
-
- ret = sscanf(lbuf, "%d %d", &usecs, &iters);
- if (ret < 1)
- return -EINVAL;
- else if (ret < 2)
- iters = DEFAULT_ITERATIONS;
-
- mutex_lock(&udelay_test_lock);
- udelay_test_usecs = usecs;
- udelay_test_iterations = iters;
- mutex_unlock(&udelay_test_lock);
-
- return count;
-}
-
-static const struct file_operations udelay_test_debugfs_ops = {
- .owner = THIS_MODULE,
- .open = udelay_test_open,
- .read = seq_read,
- .write = udelay_test_write,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int __init udelay_test_init(void)
-{
- mutex_lock(&udelay_test_lock);
- udelay_test_debugfs_file = debugfs_create_file(DEBUGFS_FILENAME,
- S_IRUSR, NULL, NULL, &udelay_test_debugfs_ops);
- mutex_unlock(&udelay_test_lock);
-
- return 0;
-}
-
-module_init(udelay_test_init);
-
-static void __exit udelay_test_exit(void)
-{
- mutex_lock(&udelay_test_lock);
- debugfs_remove(udelay_test_debugfs_file);
- mutex_unlock(&udelay_test_lock);
-}
-
-module_exit(udelay_test_exit);
-
-MODULE_AUTHOR("David Riley <davidriley@chromium.org>");
-MODULE_LICENSE("GPL");
* when we are adding another op to the rec or removing the
* current one. Thus, if the op is being added, we can
* ignore it because it hasn't attached itself to the rec
- * yet. That means we just need to find the op that has a
- * trampoline and is not beeing added.
+ * yet.
+ *
+ * If an ops is being modified (hooking to different functions)
+ * then we don't care about the new functions that are being
+ * added, just the old ones (that are probably being removed).
+ *
+ * If we are adding an ops to a function that already is using
+ * a trampoline, it needs to be removed (trampolines are only
+ * for single ops connected), then an ops that is not being
+ * modified also needs to be checked.
*/
do_for_each_ftrace_op(op, ftrace_ops_list) {
if (op->flags & FTRACE_OPS_FL_ADDING)
continue;
+
/*
- * If the ops is not being added and has a trampoline,
- * then it must be the one that we want!
+ * If the ops is being modified and is in the old
+ * hash, then it is probably being removed from this
+ * function.
*/
- if (hash_contains_ip(ip, op->func_hash))
- return op;
-
- /* If the ops is being modified, it may be in the old hash. */
if ((op->flags & FTRACE_OPS_FL_MODIFYING) &&
hash_contains_ip(ip, &op->old_hash))
return op;
+ /*
+ * If the ops is not being added or modified, and it's
+ * in its normal filter hash, then this must be the one
+ * we want!
+ */
+ if (!(op->flags & FTRACE_OPS_FL_MODIFYING) &&
+ hash_contains_ip(ip, op->func_hash))
+ return op;
} while_for_each_ftrace_op(op);
FTRACE_WARN_ON(ret);
}
-static void ftrace_run_modify_code(struct ftrace_ops *ops, int command)
+static void ftrace_run_modify_code(struct ftrace_ops *ops, int command,
+ struct ftrace_hash *old_hash)
{
ops->flags |= FTRACE_OPS_FL_MODIFYING;
+ ops->old_hash.filter_hash = old_hash;
ftrace_run_update_code(command);
+ ops->old_hash.filter_hash = NULL;
ops->flags &= ~FTRACE_OPS_FL_MODIFYING;
}
static int ftrace_probe_registered;
-static void __enable_ftrace_function_probe(void)
+static void __enable_ftrace_function_probe(struct ftrace_hash *old_hash)
{
int ret;
int i;
if (ftrace_probe_registered) {
/* still need to update the function call sites */
if (ftrace_enabled)
- ftrace_run_modify_code(&trace_probe_ops, FTRACE_UPDATE_CALLS);
+ ftrace_run_modify_code(&trace_probe_ops, FTRACE_UPDATE_CALLS,
+ old_hash);
return;
}
} while_for_each_ftrace_rec();
ret = ftrace_hash_move(&trace_probe_ops, 1, orig_hash, hash);
+
+ __enable_ftrace_function_probe(old_hash);
+
if (!ret)
free_ftrace_hash_rcu(old_hash);
else
count = ret;
- __enable_ftrace_function_probe();
-
out_unlock:
mutex_unlock(&ftrace_lock);
out:
return add_hash_entry(hash, ip);
}
-static void ftrace_ops_update_code(struct ftrace_ops *ops)
+static void ftrace_ops_update_code(struct ftrace_ops *ops,
+ struct ftrace_hash *old_hash)
{
if (ops->flags & FTRACE_OPS_FL_ENABLED && ftrace_enabled)
- ftrace_run_modify_code(ops, FTRACE_UPDATE_CALLS);
+ ftrace_run_modify_code(ops, FTRACE_UPDATE_CALLS, old_hash);
}
static int
old_hash = *orig_hash;
ret = ftrace_hash_move(ops, enable, orig_hash, hash);
if (!ret) {
- ftrace_ops_update_code(ops);
+ ftrace_ops_update_code(ops, old_hash);
free_ftrace_hash_rcu(old_hash);
}
mutex_unlock(&ftrace_lock);
ret = ftrace_hash_move(iter->ops, filter_hash,
orig_hash, iter->hash);
if (!ret) {
- ftrace_ops_update_code(iter->ops);
+ ftrace_ops_update_code(iter->ops, old_hash);
free_ftrace_hash_rcu(old_hash);
}
mutex_unlock(&ftrace_lock);
* ring_buffer_wait - wait for input to the ring buffer
* @buffer: buffer to wait on
* @cpu: the cpu buffer to wait on
+ * @full: wait until a full page is available, if @cpu != RING_BUFFER_ALL_CPUS
*
* If @cpu == RING_BUFFER_ALL_CPUS then the task will wake up as soon
* as data is added to any of the @buffer's cpu buffers. Otherwise
* it will wait for data to be added to a specific cpu buffer.
*/
-int ring_buffer_wait(struct ring_buffer *buffer, int cpu)
+int ring_buffer_wait(struct ring_buffer *buffer, int cpu, bool full)
{
- struct ring_buffer_per_cpu *cpu_buffer;
+ struct ring_buffer_per_cpu *uninitialized_var(cpu_buffer);
DEFINE_WAIT(wait);
struct rb_irq_work *work;
+ int ret = 0;
/*
* Depending on what the caller is waiting for, either any
}
- prepare_to_wait(&work->waiters, &wait, TASK_INTERRUPTIBLE);
+ while (true) {
+ prepare_to_wait(&work->waiters, &wait, TASK_INTERRUPTIBLE);
- /*
- * The events can happen in critical sections where
- * checking a work queue can cause deadlocks.
- * After adding a task to the queue, this flag is set
- * only to notify events to try to wake up the queue
- * using irq_work.
- *
- * We don't clear it even if the buffer is no longer
- * empty. The flag only causes the next event to run
- * irq_work to do the work queue wake up. The worse
- * that can happen if we race with !trace_empty() is that
- * an event will cause an irq_work to try to wake up
- * an empty queue.
- *
- * There's no reason to protect this flag either, as
- * the work queue and irq_work logic will do the necessary
- * synchronization for the wake ups. The only thing
- * that is necessary is that the wake up happens after
- * a task has been queued. It's OK for spurious wake ups.
- */
- work->waiters_pending = true;
+ /*
+ * The events can happen in critical sections where
+ * checking a work queue can cause deadlocks.
+ * After adding a task to the queue, this flag is set
+ * only to notify events to try to wake up the queue
+ * using irq_work.
+ *
+ * We don't clear it even if the buffer is no longer
+ * empty. The flag only causes the next event to run
+ * irq_work to do the work queue wake up. The worse
+ * that can happen if we race with !trace_empty() is that
+ * an event will cause an irq_work to try to wake up
+ * an empty queue.
+ *
+ * There's no reason to protect this flag either, as
+ * the work queue and irq_work logic will do the necessary
+ * synchronization for the wake ups. The only thing
+ * that is necessary is that the wake up happens after
+ * a task has been queued. It's OK for spurious wake ups.
+ */
+ work->waiters_pending = true;
+
+ if (signal_pending(current)) {
+ ret = -EINTR;
+ break;
+ }
+
+ if (cpu == RING_BUFFER_ALL_CPUS && !ring_buffer_empty(buffer))
+ break;
+
+ if (cpu != RING_BUFFER_ALL_CPUS &&
+ !ring_buffer_empty_cpu(buffer, cpu)) {
+ unsigned long flags;
+ bool pagebusy;
+
+ if (!full)
+ break;
+
+ raw_spin_lock_irqsave(&cpu_buffer->reader_lock, flags);
+ pagebusy = cpu_buffer->reader_page == cpu_buffer->commit_page;
+ raw_spin_unlock_irqrestore(&cpu_buffer->reader_lock, flags);
+
+ if (!pagebusy)
+ break;
+ }
- if ((cpu == RING_BUFFER_ALL_CPUS && ring_buffer_empty(buffer)) ||
- (cpu != RING_BUFFER_ALL_CPUS && ring_buffer_empty_cpu(buffer, cpu)))
schedule();
+ }
finish_wait(&work->waiters, &wait);
- return 0;
+
+ return ret;
}
/**
}
#endif /* CONFIG_TRACER_MAX_TRACE */
-static int wait_on_pipe(struct trace_iterator *iter)
+static int wait_on_pipe(struct trace_iterator *iter, bool full)
{
/* Iterators are static, they should be filled or empty */
if (trace_buffer_iter(iter, iter->cpu_file))
return 0;
- return ring_buffer_wait(iter->trace_buffer->buffer, iter->cpu_file);
+ return ring_buffer_wait(iter->trace_buffer->buffer, iter->cpu_file,
+ full);
}
#ifdef CONFIG_FTRACE_STARTUP_TEST
mutex_unlock(&iter->mutex);
- ret = wait_on_pipe(iter);
+ ret = wait_on_pipe(iter, false);
mutex_lock(&iter->mutex);
if (ret)
return ret;
-
- if (signal_pending(current))
- return -EINTR;
}
return 1;
goto out_unlock;
}
mutex_unlock(&trace_types_lock);
- ret = wait_on_pipe(iter);
+ ret = wait_on_pipe(iter, false);
mutex_lock(&trace_types_lock);
if (ret) {
size = ret;
goto out_unlock;
}
- if (signal_pending(current)) {
- size = -EINTR;
- goto out_unlock;
- }
goto again;
}
size = 0;
};
struct buffer_ref *ref;
int entries, size, i;
- ssize_t ret;
+ ssize_t ret = 0;
mutex_lock(&trace_types_lock);
int r;
ref = kzalloc(sizeof(*ref), GFP_KERNEL);
- if (!ref)
+ if (!ref) {
+ ret = -ENOMEM;
break;
+ }
ref->ref = 1;
ref->buffer = iter->trace_buffer->buffer;
ref->page = ring_buffer_alloc_read_page(ref->buffer, iter->cpu_file);
if (!ref->page) {
+ ret = -ENOMEM;
kfree(ref);
break;
}
/* did we read anything? */
if (!spd.nr_pages) {
+ if (ret)
+ goto out;
+
if ((file->f_flags & O_NONBLOCK) || (flags & SPLICE_F_NONBLOCK)) {
ret = -EAGAIN;
goto out;
}
mutex_unlock(&trace_types_lock);
- ret = wait_on_pipe(iter);
+ ret = wait_on_pipe(iter, true);
mutex_lock(&trace_types_lock);
if (ret)
goto out;
- if (signal_pending(current)) {
- ret = -EINTR;
- goto out;
- }
+
goto again;
}
int size;
syscall_nr = trace_get_syscall_nr(current, regs);
- if (syscall_nr < 0)
+ if (syscall_nr < 0 || syscall_nr >= NR_syscalls)
return;
/* Here we're inside tp handler's rcu_read_lock_sched (__DO_TRACE) */
int syscall_nr;
syscall_nr = trace_get_syscall_nr(current, regs);
- if (syscall_nr < 0)
+ if (syscall_nr < 0 || syscall_nr >= NR_syscalls)
return;
/* Here we're inside tp handler's rcu_read_lock_sched (__DO_TRACE()) */
int size;
syscall_nr = trace_get_syscall_nr(current, regs);
- if (syscall_nr < 0)
+ if (syscall_nr < 0 || syscall_nr >= NR_syscalls)
return;
if (!test_bit(syscall_nr, enabled_perf_enter_syscalls))
return;
int size;
syscall_nr = trace_get_syscall_nr(current, regs);
- if (syscall_nr < 0)
+ if (syscall_nr < 0 || syscall_nr >= NR_syscalls)
return;
if (!test_bit(syscall_nr, enabled_perf_exit_syscalls))
return;
RCU grace period persists, additional CPU stall warnings are
printed at more widely spaced intervals.
-config RCU_CPU_STALL_VERBOSE
- bool "Print additional per-task information for RCU_CPU_STALL_DETECTOR"
- depends on TREE_PREEMPT_RCU
- default y
- help
- This option causes RCU to printk detailed per-task information
- for any tasks that are stalling the current RCU grace period.
-
- Say N if you are unsure.
-
- Say Y if you want to enable such checks.
-
config RCU_CPU_STALL_INFO
bool "Print additional diagnostics on RCU CPU stall"
- depends on (TREE_RCU || TREE_PREEMPT_RCU) && DEBUG_KERNEL
+ depends on (TREE_RCU || PREEMPT_RCU) && DEBUG_KERNEL
default n
help
For each stalled CPU that is aware of the current RCU grace
lib-y := ctype.o string.o vsprintf.o cmdline.o \
rbtree.o radix-tree.o dump_stack.o timerqueue.o\
idr.o int_sqrt.o extable.o \
- sha1.o md5.o irq_regs.o reciprocal_div.o argv_split.o \
+ sha1.o md5.o irq_regs.o argv_split.o \
proportions.o flex_proportions.o ratelimit.o show_mem.o \
is_single_threaded.o plist.o decompress.o kobject_uevent.o \
earlycpio.o
bust_spinlocks.o hexdump.o kasprintf.o bitmap.o scatterlist.o \
gcd.o lcm.o list_sort.o uuid.o flex_array.o iovec.o clz_ctz.o \
bsearch.o find_last_bit.o find_next_bit.o llist.o memweight.o kfifo.o \
- percpu-refcount.o percpu_ida.o hash.o rhashtable.o
+ percpu-refcount.o percpu_ida.o hash.o rhashtable.o reciprocal_div.o
obj-y += string_helpers.o
obj-$(CONFIG_TEST_STRING_HELPERS) += test-string_helpers.o
obj-y += kstrtox.o
lower = src[off + k];
if (left && off + k == lim - 1)
lower &= mask;
- dst[k] = upper << (BITS_PER_LONG - rem) | lower >> rem;
+ dst[k] = lower >> rem;
+ if (rem)
+ dst[k] |= upper << (BITS_PER_LONG - rem);
if (left && k == lim - 1)
dst[k] &= mask;
}
upper = src[k];
if (left && k == lim - 1)
upper &= (1UL << left) - 1;
- dst[k + off] = lower >> (BITS_PER_LONG - rem) | upper << rem;
+ dst[k + off] = upper << rem;
+ if (rem)
+ dst[k + off] |= lower >> (BITS_PER_LONG - rem);
if (left && k + off == lim - 1)
dst[k + off] &= (1UL << left) - 1;
}
return ret;
}
EXPORT_SYMBOL(memparse);
+
+/**
+ * parse_option_str - Parse a string and check an option is set or not
+ * @str: String to be parsed
+ * @option: option name
+ *
+ * This function parses a string containing a comma-separated list of
+ * strings like a=b,c.
+ *
+ * Return true if there's such option in the string, or return false.
+ */
+bool parse_option_str(const char *str, const char *option)
+{
+ while (*str) {
+ if (!strncmp(str, option, strlen(option))) {
+ str += strlen(option);
+ if (!*str || *str == ',')
+ return true;
+ }
+
+ while (*str && *str != ',')
+ str++;
+
+ if (*str == ',')
+ str++;
+ }
+
+ return false;
+}
return pool;
}
+EXPORT_SYMBOL(devm_gen_pool_create);
/**
* dev_get_gen_pool - Obtain the gen_pool (if any) for a device
ht->shift++;
/* For each new bucket, search the corresponding old bucket
- * for the first entry that hashes to the new bucket, and
+ * for the first entry that hashes to the new bucket, and
* link the new bucket to that entry. Since all the entries
* which will end up in the new bucket appear in the same
* old bucket, this constructs an entirely valid new hash
}
/* Publish the new table pointer. Lookups may now traverse
- * the new table, but they will not benefit from any
- * additional efficiency until later steps unzip the buckets.
+ * the new table, but they will not benefit from any
+ * additional efficiency until later steps unzip the buckets.
*/
rcu_assign_pointer(ht->tbl, new_tbl);
ht->shift--;
- /* Link each bucket in the new table to the first bucket
+ /* Link each bucket in the new table to the first bucket
* in the old table that contains entries which will hash
* to the new bucket.
*/
for (i = 0; i < ntbl->size; i++) {
ntbl->buckets[i] = tbl->buckets[i];
- /* Link each bucket in the new table to the first bucket
+ /* Link each bucket in the new table to the first bucket
* in the old table that contains entries which will hash
* to the new bucket.
*/
}
table->orig_nents -= sg_size;
- if (!skip_first_chunk) {
- free_fn(sgl, alloc_size);
+ if (skip_first_chunk)
skip_first_chunk = false;
- }
+ else
+ free_fn(sgl, alloc_size);
sgl = next;
}
continue;
total += zone->present_pages;
- reserved = zone->present_pages - zone->managed_pages;
+ reserved += zone->present_pages - zone->managed_pages;
if (is_highmem_idx(zoneid))
highmem += zone->present_pages;
EXPORT_SYMBOL(memset);
#endif
+/**
+ * memzero_explicit - Fill a region of memory (e.g. sensitive
+ * keying data) with 0s.
+ * @s: Pointer to the start of the area.
+ * @count: The size of the area.
+ *
+ * memzero_explicit() doesn't need an arch-specific version as
+ * it just invokes the one of memset() implicitly.
+ */
+void memzero_explicit(void *s, size_t count)
+{
+ memset(s, 0, count);
+ OPTIMIZER_HIDE_VAR(s);
+}
+EXPORT_SYMBOL(memzero_explicit);
+
#ifndef __HAVE_ARCH_MEMCPY
/**
* memcpy - Copy one area of memory to another
* to be released by the balloon driver.
*/
if (trylock_page(page)) {
+#ifdef CONFIG_BALLOON_COMPACTION
if (!PagePrivate(page)) {
/* raced with isolation */
unlock_page(page);
continue;
}
+#endif
spin_lock_irqsave(&b_dev_info->pages_lock, flags);
balloon_page_delete(page);
__count_vm_event(BALLOON_DEFLATE);
static int reset_managed_pages_done __initdata;
-static inline void __init reset_node_managed_pages(pg_data_t *pgdat)
+void reset_node_managed_pages(pg_data_t *pgdat)
{
struct zone *z;
- if (reset_managed_pages_done)
- return;
-
for (z = pgdat->node_zones; z < pgdat->node_zones + MAX_NR_ZONES; z++)
z->managed_pages = 0;
}
{
struct pglist_data *pgdat;
+ if (reset_managed_pages_done)
+ return;
+
for_each_online_pgdat(pgdat)
reset_node_managed_pages(pgdat);
+
reset_managed_pages_done = 1;
}
err:
kfree(cma->bitmap);
+ cma->count = 0;
return -EINVAL;
}
phys_addr_t highmem_start = __pa(high_memory);
int ret = 0;
- pr_debug("%s(size %lx, base %08lx, limit %08lx alignment %08lx)\n",
- __func__, (unsigned long)size, (unsigned long)base,
- (unsigned long)limit, (unsigned long)alignment);
+ pr_debug("%s(size %pa, base %pa, limit %pa alignment %pa)\n",
+ __func__, &size, &base, &limit, &alignment);
if (cma_area_count == ARRAY_SIZE(cma_areas)) {
pr_err("Not enough slots for CMA reserved regions!\n");
size = ALIGN(size, alignment);
limit &= ~(alignment - 1);
+ if (!base)
+ fixed = false;
+
/* size should be aligned with order_per_bit */
if (!IS_ALIGNED(size >> PAGE_SHIFT, 1 << order_per_bit))
return -EINVAL;
/*
- * adjust limit to avoid crossing low/high memory boundary for
- * automatically allocated regions
+ * If allocating at a fixed base the request region must not cross the
+ * low/high memory boundary.
*/
- if (((limit == 0 || limit > memblock_end) &&
- (memblock_end - size < highmem_start &&
- memblock_end > highmem_start)) ||
- (!fixed && limit > highmem_start && limit - size < highmem_start)) {
- limit = highmem_start;
- }
-
- if (fixed && base < highmem_start && base+size > highmem_start) {
+ if (fixed && base < highmem_start && base + size > highmem_start) {
ret = -EINVAL;
- pr_err("Region at %08lx defined on low/high memory boundary (%08lx)\n",
- (unsigned long)base, (unsigned long)highmem_start);
+ pr_err("Region at %pa defined on low/high memory boundary (%pa)\n",
+ &base, &highmem_start);
goto err;
}
+ /*
+ * If the limit is unspecified or above the memblock end, its effective
+ * value will be the memblock end. Set it explicitly to simplify further
+ * checks.
+ */
+ if (limit == 0 || limit > memblock_end)
+ limit = memblock_end;
+
/* Reserve memory */
- if (base && fixed) {
+ if (fixed) {
if (memblock_is_region_reserved(base, size) ||
memblock_reserve(base, size) < 0) {
ret = -EBUSY;
goto err;
}
} else {
- phys_addr_t addr = memblock_alloc_range(size, alignment, base,
- limit);
+ phys_addr_t addr = 0;
+
+ /*
+ * All pages in the reserved area must come from the same zone.
+ * If the requested region crosses the low/high memory boundary,
+ * try allocating from high memory first and fall back to low
+ * memory in case of failure.
+ */
+ if (base < highmem_start && limit > highmem_start) {
+ addr = memblock_alloc_range(size, alignment,
+ highmem_start, limit);
+ limit = highmem_start;
+ }
+
if (!addr) {
- ret = -ENOMEM;
- goto err;
- } else {
- base = addr;
+ addr = memblock_alloc_range(size, alignment, base,
+ limit);
+ if (!addr) {
+ ret = -ENOMEM;
+ goto err;
+ }
}
+
+ base = addr;
}
ret = cma_init_reserved_mem(base, size, order_per_bit, res_cma);
if (ret)
goto err;
- pr_info("Reserved %ld MiB at %08lx\n", (unsigned long)size / SZ_1M,
- (unsigned long)base);
+ pr_info("Reserved %ld MiB at %pa\n", (unsigned long)size / SZ_1M,
+ &base);
return 0;
err:
block_end_pfn = min(block_end_pfn, end_pfn);
+ /*
+ * pfn could pass the block_end_pfn if isolated freepage
+ * is more than pageblock order. In this case, we adjust
+ * scanning range to right one.
+ */
+ if (pfn >= block_end_pfn) {
+ block_end_pfn = ALIGN(pfn + 1, pageblock_nr_pages);
+ block_end_pfn = min(block_end_pfn, end_pfn);
+ }
+
if (!pageblock_pfn_to_page(pfn, block_end_pfn, cc->zone))
break;
cc->nr_migratepages = 0;
break;
}
+
+ if (cc->nr_migratepages == COMPACT_CLUSTER_MAX)
+ break;
}
acct_isolated(cc->zone, cc);
}
acct_isolated(zone, cc);
- /* Record where migration scanner will be restarted */
- cc->migrate_pfn = low_pfn;
+ /*
+ * Record where migration scanner will be restarted. If we end up in
+ * the same pageblock as the free scanner, make the scanners fully
+ * meet so that compact_finished() terminates compaction.
+ */
+ cc->migrate_pfn = (end_pfn <= cc->free_pfn) ? low_pfn : cc->free_pfn;
return cc->nr_migratepages ? ISOLATE_SUCCESS : ISOLATE_NONE;
}
the (older) page from frontswap
*/
inc_frontswap_failed_stores();
- if (dup)
+ if (dup) {
__frontswap_clear(sis, offset);
+ frontswap_ops->invalidate_page(type, offset);
+ }
}
if (frontswap_writethrough_enabled)
/* report failure so swap also writes to swap device */
preempt_disable();
if (cmpxchg(&huge_zero_page, NULL, zero_page)) {
preempt_enable();
- __free_page(zero_page);
+ __free_pages(zero_page, compound_order(zero_page));
goto retry;
}
if (atomic_cmpxchg(&huge_zero_refcount, 1, 0) == 1) {
struct page *zero_page = xchg(&huge_zero_page, NULL);
BUG_ON(zero_page == NULL);
- __free_page(zero_page);
+ __free_pages(zero_page, compound_order(zero_page));
return HPAGE_PMD_NR;
}
return VM_FAULT_FALLBACK;
if (unlikely(anon_vma_prepare(vma)))
return VM_FAULT_OOM;
- if (unlikely(khugepaged_enter(vma)))
+ if (unlikely(khugepaged_enter(vma, vma->vm_flags)))
return VM_FAULT_OOM;
if (!(flags & FAULT_FLAG_WRITE) &&
transparent_hugepage_use_zero_page()) {
* register it here without waiting a page fault that
* may not happen any time soon.
*/
- if (unlikely(khugepaged_enter_vma_merge(vma)))
+ if (unlikely(khugepaged_enter_vma_merge(vma, *vm_flags)))
return -ENOMEM;
break;
case MADV_NOHUGEPAGE:
return 0;
}
-int khugepaged_enter_vma_merge(struct vm_area_struct *vma)
+int khugepaged_enter_vma_merge(struct vm_area_struct *vma,
+ unsigned long vm_flags)
{
unsigned long hstart, hend;
if (!vma->anon_vma)
if (vma->vm_ops)
/* khugepaged not yet working on file or special mappings */
return 0;
- VM_BUG_ON_VMA(vma->vm_flags & VM_NO_THP, vma);
+ VM_BUG_ON_VMA(vm_flags & VM_NO_THP, vma);
hstart = (vma->vm_start + ~HPAGE_PMD_MASK) & HPAGE_PMD_MASK;
hend = vma->vm_end & HPAGE_PMD_MASK;
if (hstart < hend)
- return khugepaged_enter(vma);
+ return khugepaged_enter(vma, vm_flags);
return 0;
}
/*
* in mm/page_alloc.c
*/
+
+/*
+ * Locate the struct page for both the matching buddy in our
+ * pair (buddy1) and the combined O(n+1) page they form (page).
+ *
+ * 1) Any buddy B1 will have an order O twin B2 which satisfies
+ * the following equation:
+ * B2 = B1 ^ (1 << O)
+ * For example, if the starting buddy (buddy2) is #8 its order
+ * 1 buddy is #10:
+ * B2 = 8 ^ (1 << 1) = 8 ^ 2 = 10
+ *
+ * 2) Any buddy B will have an order O+1 parent P which
+ * satisfies the following equation:
+ * P = B & ~(1 << O)
+ *
+ * Assumption: *_mem_map is contiguous at least up to MAX_ORDER
+ */
+static inline unsigned long
+__find_buddy_index(unsigned long page_idx, unsigned int order)
+{
+ return page_idx ^ (1 << order);
+}
+
+extern int __isolate_free_page(struct page *page, unsigned int order);
extern void __free_pages_bootmem(struct page *page, unsigned int order);
extern void prep_compound_page(struct page *page, unsigned long order);
#ifdef CONFIG_MEMORY_FAILURE
if (i->nr_segs == 1)
return i->count;
else if (i->type & ITER_BVEC)
- return min(i->count, i->iov->iov_len - i->iov_offset);
- else
return min(i->count, i->bvec->bv_len - i->iov_offset);
+ else
+ return min(i->count, i->iov->iov_len - i->iov_offset);
}
EXPORT_SYMBOL(iov_iter_single_seg_count);
* start move here.
*/
-/* for quick checking without looking up memcg */
-atomic_t memcg_moving __read_mostly;
-
static void mem_cgroup_start_move(struct mem_cgroup *memcg)
{
- atomic_inc(&memcg_moving);
atomic_inc(&memcg->moving_account);
synchronize_rcu();
}
* Now, mem_cgroup_clear_mc() may call this function with NULL.
* We check NULL in callee rather than caller.
*/
- if (memcg) {
- atomic_dec(&memcg_moving);
+ if (memcg)
atomic_dec(&memcg->moving_account);
- }
}
/*
return true;
}
-/*
- * Used to update mapped file or writeback or other statistics.
+/**
+ * mem_cgroup_begin_page_stat - begin a page state statistics transaction
+ * @page: page that is going to change accounted state
+ * @locked: &memcg->move_lock slowpath was taken
+ * @flags: IRQ-state flags for &memcg->move_lock
*
- * Notes: Race condition
+ * This function must mark the beginning of an accounted page state
+ * change to prevent double accounting when the page is concurrently
+ * being moved to another memcg:
*
- * Charging occurs during page instantiation, while the page is
- * unmapped and locked in page migration, or while the page table is
- * locked in THP migration. No race is possible.
+ * memcg = mem_cgroup_begin_page_stat(page, &locked, &flags);
+ * if (TestClearPageState(page))
+ * mem_cgroup_update_page_stat(memcg, state, -1);
+ * mem_cgroup_end_page_stat(memcg, locked, flags);
*
- * Uncharge happens to pages with zero references, no race possible.
+ * The RCU lock is held throughout the transaction. The fast path can
+ * get away without acquiring the memcg->move_lock (@locked is false)
+ * because page moving starts with an RCU grace period.
*
- * Charge moving between groups is protected by checking mm->moving
- * account and taking the move_lock in the slowpath.
+ * The RCU lock also protects the memcg from being freed when the page
+ * state that is going to change is the only thing preventing the page
+ * from being uncharged. E.g. end-writeback clearing PageWriteback(),
+ * which allows migration to go ahead and uncharge the page before the
+ * account transaction might be complete.
*/
-
-void __mem_cgroup_begin_update_page_stat(struct page *page,
- bool *locked, unsigned long *flags)
+struct mem_cgroup *mem_cgroup_begin_page_stat(struct page *page,
+ bool *locked,
+ unsigned long *flags)
{
struct mem_cgroup *memcg;
struct page_cgroup *pc;
+ rcu_read_lock();
+
+ if (mem_cgroup_disabled())
+ return NULL;
+
pc = lookup_page_cgroup(page);
again:
memcg = pc->mem_cgroup;
if (unlikely(!memcg || !PageCgroupUsed(pc)))
- return;
- /*
- * If this memory cgroup is not under account moving, we don't
- * need to take move_lock_mem_cgroup(). Because we already hold
- * rcu_read_lock(), any calls to move_account will be delayed until
- * rcu_read_unlock().
- */
- VM_BUG_ON(!rcu_read_lock_held());
+ return NULL;
+
+ *locked = false;
if (atomic_read(&memcg->moving_account) <= 0)
- return;
+ return memcg;
move_lock_mem_cgroup(memcg, flags);
if (memcg != pc->mem_cgroup || !PageCgroupUsed(pc)) {
goto again;
}
*locked = true;
+
+ return memcg;
}
-void __mem_cgroup_end_update_page_stat(struct page *page, unsigned long *flags)
+/**
+ * mem_cgroup_end_page_stat - finish a page state statistics transaction
+ * @memcg: the memcg that was accounted against
+ * @locked: value received from mem_cgroup_begin_page_stat()
+ * @flags: value received from mem_cgroup_begin_page_stat()
+ */
+void mem_cgroup_end_page_stat(struct mem_cgroup *memcg, bool locked,
+ unsigned long flags)
{
- struct page_cgroup *pc = lookup_page_cgroup(page);
+ if (memcg && locked)
+ move_unlock_mem_cgroup(memcg, &flags);
- /*
- * It's guaranteed that pc->mem_cgroup never changes while
- * lock is held because a routine modifies pc->mem_cgroup
- * should take move_lock_mem_cgroup().
- */
- move_unlock_mem_cgroup(pc->mem_cgroup, flags);
+ rcu_read_unlock();
}
-void mem_cgroup_update_page_stat(struct page *page,
+/**
+ * mem_cgroup_update_page_stat - update page state statistics
+ * @memcg: memcg to account against
+ * @idx: page state item to account
+ * @val: number of pages (positive or negative)
+ *
+ * See mem_cgroup_begin_page_stat() for locking requirements.
+ */
+void mem_cgroup_update_page_stat(struct mem_cgroup *memcg,
enum mem_cgroup_stat_index idx, int val)
{
- struct mem_cgroup *memcg;
- struct page_cgroup *pc = lookup_page_cgroup(page);
- unsigned long uninitialized_var(flags);
-
- if (mem_cgroup_disabled())
- return;
-
VM_BUG_ON(!rcu_read_lock_held());
- memcg = pc->mem_cgroup;
- if (unlikely(!memcg || !PageCgroupUsed(pc)))
- return;
- this_cpu_add(memcg->stat->count[idx], val);
+ if (memcg)
+ this_cpu_add(memcg->stat->count[idx], val);
}
/*
/* Is it from 0 to ~0? */
tlb->fullmm = !(start | (end+1));
tlb->need_flush_all = 0;
- tlb->start = start;
- tlb->end = end;
- tlb->need_flush = 0;
tlb->local.next = NULL;
tlb->local.nr = 0;
tlb->local.max = ARRAY_SIZE(tlb->__pages);
#ifdef CONFIG_HAVE_RCU_TABLE_FREE
tlb->batch = NULL;
#endif
+
+ __tlb_reset_range(tlb);
}
static void tlb_flush_mmu_tlbonly(struct mmu_gather *tlb)
{
- tlb->need_flush = 0;
+ if (!tlb->end)
+ return;
+
tlb_flush(tlb);
#ifdef CONFIG_HAVE_RCU_TABLE_FREE
tlb_table_flush(tlb);
#endif
+ __tlb_reset_range(tlb);
}
static void tlb_flush_mmu_free(struct mmu_gather *tlb)
void tlb_flush_mmu(struct mmu_gather *tlb)
{
- if (!tlb->need_flush)
- return;
tlb_flush_mmu_tlbonly(tlb);
tlb_flush_mmu_free(tlb);
}
{
struct mmu_gather_batch *batch;
- VM_BUG_ON(!tlb->need_flush);
+ VM_BUG_ON(!tlb->end);
batch = tlb->active;
batch->pages[batch->nr++] = page;
{
struct mmu_table_batch **batch = &tlb->batch;
- tlb->need_flush = 1;
-
/*
* When there's less then two users of this mm there cannot be a
* concurrent page-table walk.
if (!pte_file(pte)) {
swp_entry_t entry = pte_to_swp_entry(pte);
- if (swap_duplicate(entry) < 0)
- return entry.val;
-
- /* make sure dst_mm is on swapoff's mmlist. */
- if (unlikely(list_empty(&dst_mm->mmlist))) {
- spin_lock(&mmlist_lock);
- if (list_empty(&dst_mm->mmlist))
- list_add(&dst_mm->mmlist,
- &src_mm->mmlist);
- spin_unlock(&mmlist_lock);
- }
- if (likely(!non_swap_entry(entry)))
+ if (likely(!non_swap_entry(entry))) {
+ if (swap_duplicate(entry) < 0)
+ return entry.val;
+
+ /* make sure dst_mm is on swapoff's mmlist. */
+ if (unlikely(list_empty(&dst_mm->mmlist))) {
+ spin_lock(&mmlist_lock);
+ if (list_empty(&dst_mm->mmlist))
+ list_add(&dst_mm->mmlist,
+ &src_mm->mmlist);
+ spin_unlock(&mmlist_lock);
+ }
rss[MM_SWAPENTS]++;
- else if (is_migration_entry(entry)) {
+ } else if (is_migration_entry(entry)) {
page = migration_entry_to_page(entry);
if (PageAnon(page))
print_bad_pte(vma, addr, ptent, page);
if (unlikely(!__tlb_remove_page(tlb, page))) {
force_flush = 1;
+ addr += PAGE_SIZE;
break;
}
continue;
arch_leave_lazy_mmu_mode();
/* Do the actual TLB flush before dropping ptl */
- if (force_flush) {
- unsigned long old_end;
-
- /*
- * Flush the TLB just for the previous segment,
- * then update the range to be the remaining
- * TLB range.
- */
- old_end = tlb->end;
- tlb->end = addr;
+ if (force_flush)
tlb_flush_mmu_tlbonly(tlb);
- tlb->start = addr;
- tlb->end = old_end;
- }
pte_unmap_unlock(start_pte, ptl);
/*
#include <linux/stop_machine.h>
#include <linux/hugetlb.h>
#include <linux/memblock.h>
+#include <linux/bootmem.h>
#include <asm/tlbflush.h>
}
#endif /* CONFIG_MEMORY_HOTPLUG_SPARSE */
+static void reset_node_present_pages(pg_data_t *pgdat)
+{
+ struct zone *z;
+
+ for (z = pgdat->node_zones; z < pgdat->node_zones + MAX_NR_ZONES; z++)
+ z->present_pages = 0;
+
+ pgdat->node_present_pages = 0;
+}
+
/* we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */
static pg_data_t __ref *hotadd_new_pgdat(int nid, u64 start)
{
build_all_zonelists(pgdat, NULL);
mutex_unlock(&zonelists_mutex);
+ /*
+ * zone->managed_pages is set to an approximate value in
+ * free_area_init_core(), which will cause
+ * /sys/device/system/node/nodeX/meminfo has wrong data.
+ * So reset it to 0 before any memory is onlined.
+ */
+ reset_node_managed_pages(pgdat);
+
+ /*
+ * When memory is hot-added, all the memory is in offline state. So
+ * clear all zones' present_pages because they will be updated in
+ * online_pages() and offline_pages().
+ */
+ reset_node_present_pages(pgdat);
+
return pgdat;
}
unsigned long start_pfn = pgdat->node_start_pfn;
unsigned long end_pfn = start_pfn + pgdat->node_spanned_pages;
unsigned long pfn;
- struct page *pgdat_page = virt_to_page(pgdat);
int i;
for (pfn = start_pfn; pfn < end_pfn; pfn += PAGES_PER_SECTION) {
node_set_offline(nid);
unregister_one_node(nid);
- if (!PageSlab(pgdat_page) && !PageCompound(pgdat_page))
- /* node data is allocated from boot memory */
- return;
-
/* free waittable in each zone */
for (i = 0; i < MAX_NR_ZONES; i++) {
struct zone *zone = pgdat->node_zones + i;
* shrinking vma had, to cover any anon pages imported.
*/
if (exporter && exporter->anon_vma && !importer->anon_vma) {
- if (anon_vma_clone(importer, exporter))
- return -ENOMEM;
+ int error;
+
+ error = anon_vma_clone(importer, exporter);
+ if (error)
+ return error;
importer->anon_vma = exporter->anon_vma;
}
}
end, prev->vm_pgoff, NULL);
if (err)
return NULL;
- khugepaged_enter_vma_merge(prev);
+ khugepaged_enter_vma_merge(prev, vm_flags);
return prev;
}
next->vm_pgoff - pglen, NULL);
if (err)
return NULL;
- khugepaged_enter_vma_merge(area);
+ khugepaged_enter_vma_merge(area, vm_flags);
return area;
}
}
}
vma_unlock_anon_vma(vma);
- khugepaged_enter_vma_merge(vma);
+ khugepaged_enter_vma_merge(vma, vma->vm_flags);
validate_mm(vma->vm_mm);
return error;
}
}
}
vma_unlock_anon_vma(vma);
- khugepaged_enter_vma_merge(vma);
+ khugepaged_enter_vma_merge(vma, vma->vm_flags);
validate_mm(vma->vm_mm);
return error;
}
if (err)
goto out_free_vma;
- if (anon_vma_clone(new, vma))
+ err = anon_vma_clone(new, vma);
+ if (err)
goto out_free_mpol;
if (new->vm_file)
static int reset_managed_pages_done __initdata;
-static inline void __init reset_node_managed_pages(pg_data_t *pgdat)
+void reset_node_managed_pages(pg_data_t *pgdat)
{
struct zone *z;
- if (reset_managed_pages_done)
- return;
for (z = pgdat->node_zones; z < pgdat->node_zones + MAX_NR_ZONES; z++)
z->managed_pages = 0;
}
{
struct pglist_data *pgdat;
+ if (reset_managed_pages_done)
+ return;
+
for_each_online_pgdat(pgdat)
reset_node_managed_pages(pgdat);
+
reset_managed_pages_done = 1;
}
dump_tasks(memcg, nodemask);
}
+/*
+ * Number of OOM killer invocations (including memcg OOM killer).
+ * Primarily used by PM freezer to check for potential races with
+ * OOM killed frozen task.
+ */
+static atomic_t oom_kills = ATOMIC_INIT(0);
+
+int oom_kills_count(void)
+{
+ return atomic_read(&oom_kills);
+}
+
+void note_oom_kill(void)
+{
+ atomic_inc(&oom_kills);
+}
+
#define K(x) ((x) << (PAGE_SHIFT-10))
/*
* Must be called while holding a reference to p, which will be released upon
}
EXPORT_SYMBOL(account_page_dirtied);
-/*
- * Helper function for set_page_writeback family.
- *
- * The caller must hold mem_cgroup_begin/end_update_page_stat() lock
- * while calling this function.
- * See test_set_page_writeback for example.
- *
- * NOTE: Unlike account_page_dirtied this does not rely on being atomic
- * wrt interrupts.
- */
-void account_page_writeback(struct page *page)
-{
- mem_cgroup_inc_page_stat(page, MEM_CGROUP_STAT_WRITEBACK);
- inc_zone_page_state(page, NR_WRITEBACK);
-}
-EXPORT_SYMBOL(account_page_writeback);
-
/*
* For address_spaces which do not use buffers. Just tag the page as dirty in
* its radix tree.
int test_clear_page_writeback(struct page *page)
{
struct address_space *mapping = page_mapping(page);
- int ret;
- bool locked;
unsigned long memcg_flags;
+ struct mem_cgroup *memcg;
+ bool locked;
+ int ret;
- mem_cgroup_begin_update_page_stat(page, &locked, &memcg_flags);
+ memcg = mem_cgroup_begin_page_stat(page, &locked, &memcg_flags);
if (mapping) {
struct backing_dev_info *bdi = mapping->backing_dev_info;
unsigned long flags;
ret = TestClearPageWriteback(page);
}
if (ret) {
- mem_cgroup_dec_page_stat(page, MEM_CGROUP_STAT_WRITEBACK);
+ mem_cgroup_dec_page_stat(memcg, MEM_CGROUP_STAT_WRITEBACK);
dec_zone_page_state(page, NR_WRITEBACK);
inc_zone_page_state(page, NR_WRITTEN);
}
- mem_cgroup_end_update_page_stat(page, &locked, &memcg_flags);
+ mem_cgroup_end_page_stat(memcg, locked, memcg_flags);
return ret;
}
int __test_set_page_writeback(struct page *page, bool keep_write)
{
struct address_space *mapping = page_mapping(page);
- int ret;
- bool locked;
unsigned long memcg_flags;
+ struct mem_cgroup *memcg;
+ bool locked;
+ int ret;
- mem_cgroup_begin_update_page_stat(page, &locked, &memcg_flags);
+ memcg = mem_cgroup_begin_page_stat(page, &locked, &memcg_flags);
if (mapping) {
struct backing_dev_info *bdi = mapping->backing_dev_info;
unsigned long flags;
} else {
ret = TestSetPageWriteback(page);
}
- if (!ret)
- account_page_writeback(page);
- mem_cgroup_end_update_page_stat(page, &locked, &memcg_flags);
+ if (!ret) {
+ mem_cgroup_inc_page_stat(memcg, MEM_CGROUP_STAT_WRITEBACK);
+ inc_zone_page_state(page, NR_WRITEBACK);
+ }
+ mem_cgroup_end_page_stat(memcg, locked, memcg_flags);
return ret;
}
set_page_private(page, 0);
}
-/*
- * Locate the struct page for both the matching buddy in our
- * pair (buddy1) and the combined O(n+1) page they form (page).
- *
- * 1) Any buddy B1 will have an order O twin B2 which satisfies
- * the following equation:
- * B2 = B1 ^ (1 << O)
- * For example, if the starting buddy (buddy2) is #8 its order
- * 1 buddy is #10:
- * B2 = 8 ^ (1 << 1) = 8 ^ 2 = 10
- *
- * 2) Any buddy B will have an order O+1 parent P which
- * satisfies the following equation:
- * P = B & ~(1 << O)
- *
- * Assumption: *_mem_map is contiguous at least up to MAX_ORDER
- */
-static inline unsigned long
-__find_buddy_index(unsigned long page_idx, unsigned int order)
-{
- return page_idx ^ (1 << order);
-}
-
/*
* This function checks whether a page is free && is the buddy
* we can do coalesce a page and its buddy if
unsigned long combined_idx;
unsigned long uninitialized_var(buddy_idx);
struct page *buddy;
+ int max_order = MAX_ORDER;
VM_BUG_ON(!zone_is_initialized(zone));
return;
VM_BUG_ON(migratetype == -1);
+ if (is_migrate_isolate(migratetype)) {
+ /*
+ * We restrict max order of merging to prevent merge
+ * between freepages on isolate pageblock and normal
+ * pageblock. Without this, pageblock isolation
+ * could cause incorrect freepage accounting.
+ */
+ max_order = min(MAX_ORDER, pageblock_order + 1);
+ } else {
+ __mod_zone_freepage_state(zone, 1 << order, migratetype);
+ }
- page_idx = pfn & ((1 << MAX_ORDER) - 1);
+ page_idx = pfn & ((1 << max_order) - 1);
VM_BUG_ON_PAGE(page_idx & ((1 << order) - 1), page);
VM_BUG_ON_PAGE(bad_range(zone, page), page);
- while (order < MAX_ORDER-1) {
+ while (order < max_order - 1) {
buddy_idx = __find_buddy_index(page_idx, order);
buddy = page + (buddy_idx - page_idx);
if (!page_is_buddy(page, buddy, order))
*/
if (page_is_guard(buddy)) {
clear_page_guard_flag(buddy);
- set_page_private(page, 0);
- __mod_zone_freepage_state(zone, 1 << order,
- migratetype);
+ set_page_private(buddy, 0);
+ if (!is_migrate_isolate(migratetype)) {
+ __mod_zone_freepage_state(zone, 1 << order,
+ migratetype);
+ }
} else {
list_del(&buddy->lru);
zone->free_area[order].nr_free--;
/* must delete as __free_one_page list manipulates */
list_del(&page->lru);
mt = get_freepage_migratetype(page);
+ if (unlikely(has_isolate_pageblock(zone)))
+ mt = get_pageblock_migratetype(page);
+
/* MIGRATE_MOVABLE list may include MIGRATE_RESERVEs */
__free_one_page(page, page_to_pfn(page), zone, 0, mt);
trace_mm_page_pcpu_drain(page, 0, mt);
- if (likely(!is_migrate_isolate_page(page))) {
- __mod_zone_page_state(zone, NR_FREE_PAGES, 1);
- if (is_migrate_cma(mt))
- __mod_zone_page_state(zone, NR_FREE_CMA_PAGES, 1);
- }
} while (--to_free && --batch_free && !list_empty(list));
}
spin_unlock(&zone->lock);
if (nr_scanned)
__mod_zone_page_state(zone, NR_PAGES_SCANNED, -nr_scanned);
+ if (unlikely(has_isolate_pageblock(zone) ||
+ is_migrate_isolate(migratetype))) {
+ migratetype = get_pfnblock_migratetype(page, pfn);
+ }
__free_one_page(page, pfn, zone, order, migratetype);
- if (unlikely(!is_migrate_isolate(migratetype)))
- __mod_zone_freepage_state(zone, 1 << order, migratetype);
spin_unlock(&zone->lock);
}
}
EXPORT_SYMBOL_GPL(split_page);
-static int __isolate_free_page(struct page *page, unsigned int order)
+int __isolate_free_page(struct page *page, unsigned int order)
{
unsigned long watermark;
struct zone *zone;
return NULL;
}
+ /*
+ * PM-freezer should be notified that there might be an OOM killer on
+ * its way to kill and wake somebody up. This is too early and we might
+ * end up not killing anything but false positives are acceptable.
+ * See freeze_processes.
+ */
+ note_oom_kill();
+
/*
* Go through the zonelist yet one more time, keep very high watermark
* here, this is only to catch a parallel oom killing, we must fail if
/* Make sure the range is really isolated. */
if (test_pages_isolated(outer_start, end, false)) {
- pr_warn("alloc_contig_range test_pages_isolated(%lx, %lx) failed\n",
- outer_start, end);
+ pr_info("%s: [%lx, %lx) PFNs busy\n",
+ __func__, outer_start, end);
ret = -EBUSY;
goto done;
}
-
/* Grab isolated pages from freelists. */
outer_end = isolate_freepages_range(&cc, outer_start, end);
if (!outer_end) {
sizeof(struct page_cgroup) * PAGES_PER_SECTION;
BUG_ON(PageReserved(page));
+ kmemleak_free(addr);
free_pages_exact(addr, table_size);
}
}
int migratetype = get_pageblock_migratetype(page);
set_pageblock_migratetype(page, MIGRATE_ISOLATE);
+ zone->nr_isolate_pageblock++;
nr_pages = move_freepages_block(zone, page, MIGRATE_ISOLATE);
__mod_zone_freepage_state(zone, -nr_pages, migratetype);
{
struct zone *zone;
unsigned long flags, nr_pages;
+ struct page *isolated_page = NULL;
+ unsigned int order;
+ unsigned long page_idx, buddy_idx;
+ struct page *buddy;
zone = page_zone(page);
spin_lock_irqsave(&zone->lock, flags);
if (get_pageblock_migratetype(page) != MIGRATE_ISOLATE)
goto out;
- nr_pages = move_freepages_block(zone, page, migratetype);
- __mod_zone_freepage_state(zone, nr_pages, migratetype);
+
+ /*
+ * Because freepage with more than pageblock_order on isolated
+ * pageblock is restricted to merge due to freepage counting problem,
+ * it is possible that there is free buddy page.
+ * move_freepages_block() doesn't care of merge so we need other
+ * approach in order to merge them. Isolation and free will make
+ * these pages to be merged.
+ */
+ if (PageBuddy(page)) {
+ order = page_order(page);
+ if (order >= pageblock_order) {
+ page_idx = page_to_pfn(page) & ((1 << MAX_ORDER) - 1);
+ buddy_idx = __find_buddy_index(page_idx, order);
+ buddy = page + (buddy_idx - page_idx);
+
+ if (!is_migrate_isolate_page(buddy)) {
+ __isolate_free_page(page, order);
+ set_page_refcounted(page);
+ isolated_page = page;
+ }
+ }
+ }
+
+ /*
+ * If we isolate freepage with more than pageblock_order, there
+ * should be no freepage in the range, so we could avoid costly
+ * pageblock scanning for freepage moving.
+ */
+ if (!isolated_page) {
+ nr_pages = move_freepages_block(zone, page, migratetype);
+ __mod_zone_freepage_state(zone, nr_pages, migratetype);
+ }
set_pageblock_migratetype(page, migratetype);
+ zone->nr_isolate_pageblock--;
out:
spin_unlock_irqrestore(&zone->lock, flags);
+ if (isolated_page)
+ __free_pages(isolated_page, order);
}
static inline struct page *
{
struct anon_vma_chain *avc;
struct anon_vma *anon_vma;
+ int error;
/* Don't bother if the parent process has no anon_vma here. */
if (!pvma->anon_vma)
* First, attach the new VMA to the parent VMA's anon_vmas,
* so rmap can find non-COWed pages in child processes.
*/
- if (anon_vma_clone(vma, pvma))
- return -ENOMEM;
+ error = anon_vma_clone(vma, pvma);
+ if (error)
+ return error;
/* Then add our own anon_vma. */
anon_vma = anon_vma_alloc();
*/
void page_add_file_rmap(struct page *page)
{
- bool locked;
+ struct mem_cgroup *memcg;
unsigned long flags;
+ bool locked;
- mem_cgroup_begin_update_page_stat(page, &locked, &flags);
+ memcg = mem_cgroup_begin_page_stat(page, &locked, &flags);
if (atomic_inc_and_test(&page->_mapcount)) {
__inc_zone_page_state(page, NR_FILE_MAPPED);
- mem_cgroup_inc_page_stat(page, MEM_CGROUP_STAT_FILE_MAPPED);
+ mem_cgroup_inc_page_stat(memcg, MEM_CGROUP_STAT_FILE_MAPPED);
}
- mem_cgroup_end_update_page_stat(page, &locked, &flags);
+ mem_cgroup_end_page_stat(memcg, locked, flags);
+}
+
+static void page_remove_file_rmap(struct page *page)
+{
+ struct mem_cgroup *memcg;
+ unsigned long flags;
+ bool locked;
+
+ memcg = mem_cgroup_begin_page_stat(page, &locked, &flags);
+
+ /* page still mapped by someone else? */
+ if (!atomic_add_negative(-1, &page->_mapcount))
+ goto out;
+
+ /* Hugepages are not counted in NR_FILE_MAPPED for now. */
+ if (unlikely(PageHuge(page)))
+ goto out;
+
+ /*
+ * We use the irq-unsafe __{inc|mod}_zone_page_stat because
+ * these counters are not modified in interrupt context, and
+ * pte lock(a spinlock) is held, which implies preemption disabled.
+ */
+ __dec_zone_page_state(page, NR_FILE_MAPPED);
+ mem_cgroup_dec_page_stat(memcg, MEM_CGROUP_STAT_FILE_MAPPED);
+
+ if (unlikely(PageMlocked(page)))
+ clear_page_mlock(page);
+out:
+ mem_cgroup_end_page_stat(memcg, locked, flags);
}
/**
*/
void page_remove_rmap(struct page *page)
{
- bool anon = PageAnon(page);
- bool locked;
- unsigned long flags;
-
- /*
- * The anon case has no mem_cgroup page_stat to update; but may
- * uncharge_page() below, where the lock ordering can deadlock if
- * we hold the lock against page_stat move: so avoid it on anon.
- */
- if (!anon)
- mem_cgroup_begin_update_page_stat(page, &locked, &flags);
+ if (!PageAnon(page)) {
+ page_remove_file_rmap(page);
+ return;
+ }
/* page still mapped by someone else? */
if (!atomic_add_negative(-1, &page->_mapcount))
- goto out;
+ return;
+
+ /* Hugepages are not counted in NR_ANON_PAGES for now. */
+ if (unlikely(PageHuge(page)))
+ return;
/*
- * Hugepages are not counted in NR_ANON_PAGES nor NR_FILE_MAPPED
- * and not charged by memcg for now.
- *
* We use the irq-unsafe __{inc|mod}_zone_page_stat because
* these counters are not modified in interrupt context, and
- * these counters are not modified in interrupt context, and
* pte lock(a spinlock) is held, which implies preemption disabled.
*/
- if (unlikely(PageHuge(page)))
- goto out;
- if (anon) {
- if (PageTransHuge(page))
- __dec_zone_page_state(page,
- NR_ANON_TRANSPARENT_HUGEPAGES);
- __mod_zone_page_state(page_zone(page), NR_ANON_PAGES,
- -hpage_nr_pages(page));
- } else {
- __dec_zone_page_state(page, NR_FILE_MAPPED);
- mem_cgroup_dec_page_stat(page, MEM_CGROUP_STAT_FILE_MAPPED);
- mem_cgroup_end_update_page_stat(page, &locked, &flags);
- }
+ if (PageTransHuge(page))
+ __dec_zone_page_state(page, NR_ANON_TRANSPARENT_HUGEPAGES);
+
+ __mod_zone_page_state(page_zone(page), NR_ANON_PAGES,
+ -hpage_nr_pages(page));
+
if (unlikely(PageMlocked(page)))
clear_page_mlock(page);
+
/*
* It would be tidy to reset the PageAnon mapping here,
* but that might overwrite a racing page_add_anon_rmap
* Leaving it set also helps swapoff to reinstate ptes
* faster for those pages still in swapcache.
*/
- return;
-out:
- if (!anon)
- mem_cgroup_end_update_page_stat(page, &locked, &flags);
}
/*
return 0;
}
+static int shmem_whiteout(struct inode *old_dir, struct dentry *old_dentry)
+{
+ struct dentry *whiteout;
+ int error;
+
+ whiteout = d_alloc(old_dentry->d_parent, &old_dentry->d_name);
+ if (!whiteout)
+ return -ENOMEM;
+
+ error = shmem_mknod(old_dir, whiteout,
+ S_IFCHR | WHITEOUT_MODE, WHITEOUT_DEV);
+ dput(whiteout);
+ if (error)
+ return error;
+
+ /*
+ * Cheat and hash the whiteout while the old dentry is still in
+ * place, instead of playing games with FS_RENAME_DOES_D_MOVE.
+ *
+ * d_lookup() will consistently find one of them at this point,
+ * not sure which one, but that isn't even important.
+ */
+ d_rehash(whiteout);
+ return 0;
+}
+
/*
* The VFS layer already does all the dentry stuff for rename,
* we just have to decrement the usage count for the target if
struct inode *inode = old_dentry->d_inode;
int they_are_dirs = S_ISDIR(inode->i_mode);
- if (flags & ~(RENAME_NOREPLACE | RENAME_EXCHANGE))
+ if (flags & ~(RENAME_NOREPLACE | RENAME_EXCHANGE | RENAME_WHITEOUT))
return -EINVAL;
if (flags & RENAME_EXCHANGE)
if (!simple_empty(new_dentry))
return -ENOTEMPTY;
+ if (flags & RENAME_WHITEOUT) {
+ int error;
+
+ error = shmem_whiteout(old_dir, old_dentry);
+ if (error)
+ return error;
+ }
+
if (new_dentry->d_inode) {
(void) shmem_unlink(new_dir, new_dentry);
if (they_are_dirs) {
void *obj;
int x;
- VM_BUG_ON(nodeid > num_online_nodes());
+ VM_BUG_ON(nodeid < 0 || nodeid >= MAX_NUMNODES);
n = get_node(cachep, nodeid);
BUG_ON(!n);
s->object_size);
continue;
}
-
-#if !defined(CONFIG_SLUB)
- if (!strcmp(s->name, name)) {
- pr_err("%s (%s): Cache name already exists.\n",
- __func__, name);
- dump_stack();
- s = NULL;
- return -EINVAL;
- }
-#endif
}
WARN_ON(strchr(name, ' ')); /* It confuses parsers */
if (s->size - size >= sizeof(void *))
continue;
+ if (IS_ENABLED(CONFIG_SLAB) && align &&
+ (align > s->align || s->align % align))
+ continue;
+
return s;
}
return NULL;
#include <linux/buffer_head.h> /* grr. try_to_release_page,
do_invalidatepage */
#include <linux/cleancache.h>
+#include <linux/rmap.h>
#include "internal.h"
static void clear_exceptional_entry(struct address_space *mapping,
* necessary) to @newsize. It will be typically be called from the filesystem's
* setattr function when ATTR_SIZE is passed in.
*
- * Must be called with inode_mutex held and before all filesystem specific
- * block truncation has been performed.
+ * Must be called with a lock serializing truncates and writes (generally
+ * i_mutex but e.g. xfs uses a different lock) and before all filesystem
+ * specific block truncation has been performed.
*/
void truncate_setsize(struct inode *inode, loff_t newsize)
{
+ loff_t oldsize = inode->i_size;
+
i_size_write(inode, newsize);
+ if (newsize > oldsize)
+ pagecache_isize_extended(inode, oldsize, newsize);
truncate_pagecache(inode, newsize);
}
EXPORT_SYMBOL(truncate_setsize);
+/**
+ * pagecache_isize_extended - update pagecache after extension of i_size
+ * @inode: inode for which i_size was extended
+ * @from: original inode size
+ * @to: new inode size
+ *
+ * Handle extension of inode size either caused by extending truncate or by
+ * write starting after current i_size. We mark the page straddling current
+ * i_size RO so that page_mkwrite() is called on the nearest write access to
+ * the page. This way filesystem can be sure that page_mkwrite() is called on
+ * the page before user writes to the page via mmap after the i_size has been
+ * changed.
+ *
+ * The function must be called after i_size is updated so that page fault
+ * coming after we unlock the page will already see the new i_size.
+ * The function must be called while we still hold i_mutex - this not only
+ * makes sure i_size is stable but also that userspace cannot observe new
+ * i_size value before we are prepared to store mmap writes at new inode size.
+ */
+void pagecache_isize_extended(struct inode *inode, loff_t from, loff_t to)
+{
+ int bsize = 1 << inode->i_blkbits;
+ loff_t rounded_from;
+ struct page *page;
+ pgoff_t index;
+
+ WARN_ON(to > inode->i_size);
+
+ if (from >= to || bsize == PAGE_CACHE_SIZE)
+ return;
+ /* Page straddling @from will not have any hole block created? */
+ rounded_from = round_up(from, bsize);
+ if (to <= rounded_from || !(rounded_from & (PAGE_CACHE_SIZE - 1)))
+ return;
+
+ index = from >> PAGE_CACHE_SHIFT;
+ page = find_lock_page(inode->i_mapping, index);
+ /* Page not cached? Nothing to do */
+ if (!page)
+ return;
+ /*
+ * See clear_page_dirty_for_io() for details why set_page_dirty()
+ * is needed.
+ */
+ if (page_mkclean(page))
+ set_page_dirty(page);
+ unlock_page(page);
+ page_cache_release(page);
+}
+EXPORT_SYMBOL(pagecache_isize_extended);
+
/**
* truncate_pagecache_range - unmap and remove pagecache that is hole-punched
* @inode: inode
unsigned long scanned;
unsigned long reclaimed;
+ spin_lock(&vmpr->sr_lock);
/*
* Several contexts might be calling vmpressure(), so it is
* possible that the work was rescheduled again before the old
* here. No need for any locks here since we don't care if
* vmpr->reclaimed is in sync.
*/
- if (!vmpr->scanned)
+ scanned = vmpr->scanned;
+ if (!scanned) {
+ spin_unlock(&vmpr->sr_lock);
return;
+ }
- spin_lock(&vmpr->sr_lock);
- scanned = vmpr->scanned;
reclaimed = vmpr->reclaimed;
vmpr->scanned = 0;
vmpr->reclaimed = 0;
bool "Networking support"
select NLATTR
select GENERIC_NET_UTILS
- select ANON_INODES
+ select BPF
---help---
Unless you really know what you are doing, you should say Y here.
The reason is that some programs need kernel networking support even
#define __get_rpn_stop_bits(line) (((line) >> 2) & 0x1)
#define __get_rpn_parity(line) (((line) >> 3) & 0x7)
+static DECLARE_WAIT_QUEUE_HEAD(rfcomm_wq);
+
static void rfcomm_schedule(void)
{
- if (!rfcomm_thread)
- return;
- wake_up_process(rfcomm_thread);
+ wake_up_all(&rfcomm_wq);
}
/* ---- RFCOMM FCS computation ---- */
static int rfcomm_run(void *unused)
{
+ DEFINE_WAIT_FUNC(wait, woken_wake_function);
BT_DBG("");
set_user_nice(current, -10);
rfcomm_add_listener(BDADDR_ANY);
- while (1) {
- set_current_state(TASK_INTERRUPTIBLE);
-
- if (kthread_should_stop())
- break;
+ add_wait_queue(&rfcomm_wq, &wait);
+ while (!kthread_should_stop()) {
/* Process stuff */
rfcomm_process_sessions();
- schedule();
+ wait_woken(&wait, TASK_INTERRUPTIBLE, MAX_SCHEDULE_TIMEOUT);
}
- __set_current_state(TASK_RUNNING);
+ remove_wait_queue(&rfcomm_wq, &wait);
rfcomm_kill_listener();
kfree_skb(skb);
}
+EXPORT_SYMBOL_GPL(br_deliver);
/* called with rcu_read_lock */
void br_forward(const struct net_bridge_port *to, struct sk_buff *skb, struct sk_buff *skb0)
return;
if (port) {
- __skb_push(skb, sizeof(struct ethhdr));
skb->dev = port->dev;
NF_HOOK(NFPROTO_BRIDGE, NF_BR_LOCAL_OUT, skb, NULL, skb->dev,
- dev_queue_xmit);
+ br_dev_queue_push_xmit);
} else {
br_multicast_select_own_querier(br, ip, skb);
netif_rx(skb);
static int br_parse_ip_options(struct sk_buff *skb)
{
- struct ip_options *opt;
const struct iphdr *iph;
struct net_device *dev = skb->dev;
u32 len;
goto inhdr_error;
iph = ip_hdr(skb);
- opt = &(IPCB(skb)->opt);
/* Basic sanity checks */
if (iph->ihl < 5 || iph->version != 4)
}
memset(IPCB(skb), 0, sizeof(struct inet_skb_parm));
- if (iph->ihl == 5)
- return 0;
-
- opt->optlen = iph->ihl*4 - sizeof(struct iphdr);
- if (ip_options_compile(dev_net(dev), opt, skb))
- goto inhdr_error;
-
- /* Check correct handling of SRR option */
- if (unlikely(opt->srr)) {
- struct in_device *in_dev = __in_dev_get_rcu(dev);
- if (in_dev && !IN_DEV_SOURCE_ROUTE(in_dev))
- goto drop;
-
- if (ip_options_rcv_srr(skb))
- goto drop;
- }
-
+ /* We should really parse IP options here but until
+ * somebody who actually uses IP options complains to
+ * us we'll just silently ignore the options because
+ * we're lazy!
+ */
return 0;
inhdr_error:
[IFLA_BRPORT_MODE] = { .type = NLA_U8 },
[IFLA_BRPORT_GUARD] = { .type = NLA_U8 },
[IFLA_BRPORT_PROTECT] = { .type = NLA_U8 },
+ [IFLA_BRPORT_FAST_LEAVE]= { .type = NLA_U8 },
[IFLA_BRPORT_LEARNING] = { .type = NLA_U8 },
[IFLA_BRPORT_UNICAST_FLOOD] = { .type = NLA_U8 },
};
.type = NFT_CHAIN_T_DEFAULT,
.family = NFPROTO_BRIDGE,
.owner = THIS_MODULE,
- .hook_mask = (1 << NF_BR_LOCAL_IN) |
+ .hook_mask = (1 << NF_BR_PRE_ROUTING) |
+ (1 << NF_BR_LOCAL_IN) |
(1 << NF_BR_FORWARD) |
- (1 << NF_BR_LOCAL_OUT),
+ (1 << NF_BR_LOCAL_OUT) |
+ (1 << NF_BR_POST_ROUTING),
};
static int __init nf_tables_bridge_init(void)
#include <net/netfilter/nft_reject.h>
#include <net/netfilter/ipv4/nf_reject.h>
#include <net/netfilter/ipv6/nf_reject.h>
+#include <linux/ip.h>
+#include <net/ip.h>
+#include <net/ip6_checksum.h>
+#include <linux/netfilter_bridge.h>
+#include "../br_private.h"
+
+static void nft_reject_br_push_etherhdr(struct sk_buff *oldskb,
+ struct sk_buff *nskb)
+{
+ struct ethhdr *eth;
+
+ eth = (struct ethhdr *)skb_push(nskb, ETH_HLEN);
+ skb_reset_mac_header(nskb);
+ ether_addr_copy(eth->h_source, eth_hdr(oldskb)->h_dest);
+ ether_addr_copy(eth->h_dest, eth_hdr(oldskb)->h_source);
+ eth->h_proto = eth_hdr(oldskb)->h_proto;
+ skb_pull(nskb, ETH_HLEN);
+}
+
+static int nft_reject_iphdr_validate(struct sk_buff *oldskb)
+{
+ struct iphdr *iph;
+ u32 len;
+
+ if (!pskb_may_pull(oldskb, sizeof(struct iphdr)))
+ return 0;
+
+ iph = ip_hdr(oldskb);
+ if (iph->ihl < 5 || iph->version != 4)
+ return 0;
+
+ len = ntohs(iph->tot_len);
+ if (oldskb->len < len)
+ return 0;
+ else if (len < (iph->ihl*4))
+ return 0;
+
+ if (!pskb_may_pull(oldskb, iph->ihl*4))
+ return 0;
+
+ return 1;
+}
+
+static void nft_reject_br_send_v4_tcp_reset(struct sk_buff *oldskb, int hook)
+{
+ struct sk_buff *nskb;
+ struct iphdr *niph;
+ const struct tcphdr *oth;
+ struct tcphdr _oth;
+
+ if (!nft_reject_iphdr_validate(oldskb))
+ return;
+
+ oth = nf_reject_ip_tcphdr_get(oldskb, &_oth, hook);
+ if (!oth)
+ return;
+
+ nskb = alloc_skb(sizeof(struct iphdr) + sizeof(struct tcphdr) +
+ LL_MAX_HEADER, GFP_ATOMIC);
+ if (!nskb)
+ return;
+
+ skb_reserve(nskb, LL_MAX_HEADER);
+ niph = nf_reject_iphdr_put(nskb, oldskb, IPPROTO_TCP,
+ sysctl_ip_default_ttl);
+ nf_reject_ip_tcphdr_put(nskb, oldskb, oth);
+ niph->ttl = sysctl_ip_default_ttl;
+ niph->tot_len = htons(nskb->len);
+ ip_send_check(niph);
+
+ nft_reject_br_push_etherhdr(oldskb, nskb);
+
+ br_deliver(br_port_get_rcu(oldskb->dev), nskb);
+}
+
+static void nft_reject_br_send_v4_unreach(struct sk_buff *oldskb, int hook,
+ u8 code)
+{
+ struct sk_buff *nskb;
+ struct iphdr *niph;
+ struct icmphdr *icmph;
+ unsigned int len;
+ void *payload;
+ __wsum csum;
+
+ if (!nft_reject_iphdr_validate(oldskb))
+ return;
+
+ /* IP header checks: fragment. */
+ if (ip_hdr(oldskb)->frag_off & htons(IP_OFFSET))
+ return;
+
+ /* RFC says return as much as we can without exceeding 576 bytes. */
+ len = min_t(unsigned int, 536, oldskb->len);
+
+ if (!pskb_may_pull(oldskb, len))
+ return;
+
+ if (nf_ip_checksum(oldskb, hook, ip_hdrlen(oldskb), 0))
+ return;
+
+ nskb = alloc_skb(sizeof(struct iphdr) + sizeof(struct icmphdr) +
+ LL_MAX_HEADER + len, GFP_ATOMIC);
+ if (!nskb)
+ return;
+
+ skb_reserve(nskb, LL_MAX_HEADER);
+ niph = nf_reject_iphdr_put(nskb, oldskb, IPPROTO_ICMP,
+ sysctl_ip_default_ttl);
+
+ skb_reset_transport_header(nskb);
+ icmph = (struct icmphdr *)skb_put(nskb, sizeof(struct icmphdr));
+ memset(icmph, 0, sizeof(*icmph));
+ icmph->type = ICMP_DEST_UNREACH;
+ icmph->code = code;
+
+ payload = skb_put(nskb, len);
+ memcpy(payload, skb_network_header(oldskb), len);
+
+ csum = csum_partial((void *)icmph, len + sizeof(struct icmphdr), 0);
+ icmph->checksum = csum_fold(csum);
+
+ niph->tot_len = htons(nskb->len);
+ ip_send_check(niph);
+
+ nft_reject_br_push_etherhdr(oldskb, nskb);
+
+ br_deliver(br_port_get_rcu(oldskb->dev), nskb);
+}
+
+static int nft_reject_ip6hdr_validate(struct sk_buff *oldskb)
+{
+ struct ipv6hdr *hdr;
+ u32 pkt_len;
+
+ if (!pskb_may_pull(oldskb, sizeof(struct ipv6hdr)))
+ return 0;
+
+ hdr = ipv6_hdr(oldskb);
+ if (hdr->version != 6)
+ return 0;
+
+ pkt_len = ntohs(hdr->payload_len);
+ if (pkt_len + sizeof(struct ipv6hdr) > oldskb->len)
+ return 0;
+
+ return 1;
+}
+
+static void nft_reject_br_send_v6_tcp_reset(struct net *net,
+ struct sk_buff *oldskb, int hook)
+{
+ struct sk_buff *nskb;
+ const struct tcphdr *oth;
+ struct tcphdr _oth;
+ unsigned int otcplen;
+ struct ipv6hdr *nip6h;
+
+ if (!nft_reject_ip6hdr_validate(oldskb))
+ return;
+
+ oth = nf_reject_ip6_tcphdr_get(oldskb, &_oth, &otcplen, hook);
+ if (!oth)
+ return;
+
+ nskb = alloc_skb(sizeof(struct ipv6hdr) + sizeof(struct tcphdr) +
+ LL_MAX_HEADER, GFP_ATOMIC);
+ if (!nskb)
+ return;
+
+ skb_reserve(nskb, LL_MAX_HEADER);
+ nip6h = nf_reject_ip6hdr_put(nskb, oldskb, IPPROTO_TCP,
+ net->ipv6.devconf_all->hop_limit);
+ nf_reject_ip6_tcphdr_put(nskb, oldskb, oth, otcplen);
+ nip6h->payload_len = htons(nskb->len - sizeof(struct ipv6hdr));
+
+ nft_reject_br_push_etherhdr(oldskb, nskb);
+
+ br_deliver(br_port_get_rcu(oldskb->dev), nskb);
+}
+
+static void nft_reject_br_send_v6_unreach(struct net *net,
+ struct sk_buff *oldskb, int hook,
+ u8 code)
+{
+ struct sk_buff *nskb;
+ struct ipv6hdr *nip6h;
+ struct icmp6hdr *icmp6h;
+ unsigned int len;
+ void *payload;
+
+ if (!nft_reject_ip6hdr_validate(oldskb))
+ return;
+
+ /* Include "As much of invoking packet as possible without the ICMPv6
+ * packet exceeding the minimum IPv6 MTU" in the ICMP payload.
+ */
+ len = min_t(unsigned int, 1220, oldskb->len);
+
+ if (!pskb_may_pull(oldskb, len))
+ return;
+
+ nskb = alloc_skb(sizeof(struct iphdr) + sizeof(struct icmp6hdr) +
+ LL_MAX_HEADER + len, GFP_ATOMIC);
+ if (!nskb)
+ return;
+
+ skb_reserve(nskb, LL_MAX_HEADER);
+ nip6h = nf_reject_ip6hdr_put(nskb, oldskb, IPPROTO_ICMPV6,
+ net->ipv6.devconf_all->hop_limit);
+
+ skb_reset_transport_header(nskb);
+ icmp6h = (struct icmp6hdr *)skb_put(nskb, sizeof(struct icmp6hdr));
+ memset(icmp6h, 0, sizeof(*icmp6h));
+ icmp6h->icmp6_type = ICMPV6_DEST_UNREACH;
+ icmp6h->icmp6_code = code;
+
+ payload = skb_put(nskb, len);
+ memcpy(payload, skb_network_header(oldskb), len);
+ nip6h->payload_len = htons(nskb->len - sizeof(struct ipv6hdr));
+
+ icmp6h->icmp6_cksum =
+ csum_ipv6_magic(&nip6h->saddr, &nip6h->daddr,
+ nskb->len - sizeof(struct ipv6hdr),
+ IPPROTO_ICMPV6,
+ csum_partial(icmp6h,
+ nskb->len - sizeof(struct ipv6hdr),
+ 0));
+
+ nft_reject_br_push_etherhdr(oldskb, nskb);
+
+ br_deliver(br_port_get_rcu(oldskb->dev), nskb);
+}
static void nft_reject_bridge_eval(const struct nft_expr *expr,
struct nft_data data[NFT_REG_MAX + 1],
{
struct nft_reject *priv = nft_expr_priv(expr);
struct net *net = dev_net((pkt->in != NULL) ? pkt->in : pkt->out);
+ const unsigned char *dest = eth_hdr(pkt->skb)->h_dest;
+
+ if (is_broadcast_ether_addr(dest) ||
+ is_multicast_ether_addr(dest))
+ goto out;
switch (eth_hdr(pkt->skb)->h_proto) {
case htons(ETH_P_IP):
switch (priv->type) {
case NFT_REJECT_ICMP_UNREACH:
- nf_send_unreach(pkt->skb, priv->icmp_code);
+ nft_reject_br_send_v4_unreach(pkt->skb,
+ pkt->ops->hooknum,
+ priv->icmp_code);
break;
case NFT_REJECT_TCP_RST:
- nf_send_reset(pkt->skb, pkt->ops->hooknum);
+ nft_reject_br_send_v4_tcp_reset(pkt->skb,
+ pkt->ops->hooknum);
break;
case NFT_REJECT_ICMPX_UNREACH:
- nf_send_unreach(pkt->skb,
- nft_reject_icmp_code(priv->icmp_code));
+ nft_reject_br_send_v4_unreach(pkt->skb,
+ pkt->ops->hooknum,
+ nft_reject_icmp_code(priv->icmp_code));
break;
}
break;
case htons(ETH_P_IPV6):
switch (priv->type) {
case NFT_REJECT_ICMP_UNREACH:
- nf_send_unreach6(net, pkt->skb, priv->icmp_code,
- pkt->ops->hooknum);
+ nft_reject_br_send_v6_unreach(net, pkt->skb,
+ pkt->ops->hooknum,
+ priv->icmp_code);
break;
case NFT_REJECT_TCP_RST:
- nf_send_reset6(net, pkt->skb, pkt->ops->hooknum);
+ nft_reject_br_send_v6_tcp_reset(net, pkt->skb,
+ pkt->ops->hooknum);
break;
case NFT_REJECT_ICMPX_UNREACH:
- nf_send_unreach6(net, pkt->skb,
- nft_reject_icmpv6_code(priv->icmp_code),
- pkt->ops->hooknum);
+ nft_reject_br_send_v6_unreach(net, pkt->skb,
+ pkt->ops->hooknum,
+ nft_reject_icmpv6_code(priv->icmp_code));
break;
}
break;
/* No explicit way to reject this protocol, drop it. */
break;
}
+out:
data[NFT_REG_VERDICT].verdict = NF_DROP;
}
+static int nft_reject_bridge_validate_hooks(const struct nft_chain *chain)
+{
+ struct nft_base_chain *basechain;
+
+ if (chain->flags & NFT_BASE_CHAIN) {
+ basechain = nft_base_chain(chain);
+
+ switch (basechain->ops[0].hooknum) {
+ case NF_BR_PRE_ROUTING:
+ case NF_BR_LOCAL_IN:
+ break;
+ default:
+ return -EOPNOTSUPP;
+ }
+ }
+ return 0;
+}
+
static int nft_reject_bridge_init(const struct nft_ctx *ctx,
const struct nft_expr *expr,
const struct nlattr * const tb[])
{
struct nft_reject *priv = nft_expr_priv(expr);
- int icmp_code;
+ int icmp_code, err;
+
+ err = nft_reject_bridge_validate_hooks(ctx->chain);
+ if (err < 0)
+ return err;
if (tb[NFTA_REJECT_TYPE] == NULL)
return -EINVAL;
return -1;
}
+static int nft_reject_bridge_validate(const struct nft_ctx *ctx,
+ const struct nft_expr *expr,
+ const struct nft_data **data)
+{
+ return nft_reject_bridge_validate_hooks(ctx->chain);
+}
+
static struct nft_expr_type nft_reject_bridge_type;
static const struct nft_expr_ops nft_reject_bridge_ops = {
.type = &nft_reject_bridge_type,
.eval = nft_reject_bridge_eval,
.init = nft_reject_bridge_init,
.dump = nft_reject_bridge_dump,
+ .validate = nft_reject_bridge_validate,
};
static struct nft_expr_type nft_reject_bridge_type __read_mostly = {
struct ceph_crypto_key old_key;
void *ticket_buf = NULL;
void *tp, *tpend;
+ void **ptp;
struct ceph_timespec new_validity;
struct ceph_crypto_key new_session_key;
struct ceph_buffer *new_ticket_blob;
goto out;
}
tp = ticket_buf;
- dlen = ceph_decode_32(&tp);
+ ptp = &tp;
+ tpend = *ptp + dlen;
} else {
/* unencrypted */
- ceph_decode_32_safe(p, end, dlen, bad);
- ticket_buf = kmalloc(dlen, GFP_NOFS);
- if (!ticket_buf) {
- ret = -ENOMEM;
- goto out;
- }
- tp = ticket_buf;
- ceph_decode_need(p, end, dlen, bad);
- ceph_decode_copy(p, ticket_buf, dlen);
+ ptp = p;
+ tpend = end;
}
- tpend = tp + dlen;
+ ceph_decode_32_safe(ptp, tpend, dlen, bad);
dout(" ticket blob is %d bytes\n", dlen);
- ceph_decode_need(&tp, tpend, 1 + sizeof(u64), bad);
- blob_struct_v = ceph_decode_8(&tp);
- new_secret_id = ceph_decode_64(&tp);
- ret = ceph_decode_buffer(&new_ticket_blob, &tp, tpend);
+ ceph_decode_need(ptp, tpend, 1 + sizeof(u64), bad);
+ blob_struct_v = ceph_decode_8(ptp);
+ new_secret_id = ceph_decode_64(ptp);
+ ret = ceph_decode_buffer(&new_ticket_blob, ptp, tpend);
if (ret)
goto out;
static const u8 *aes_iv = (u8 *)CEPH_AES_IV;
+/*
+ * Should be used for buffers allocated with ceph_kvmalloc().
+ * Currently these are encrypt out-buffer (ceph_buffer) and decrypt
+ * in-buffer (msg front).
+ *
+ * Dispose of @sgt with teardown_sgtable().
+ *
+ * @prealloc_sg is to avoid memory allocation inside sg_alloc_table()
+ * in cases where a single sg is sufficient. No attempt to reduce the
+ * number of sgs by squeezing physically contiguous pages together is
+ * made though, for simplicity.
+ */
+static int setup_sgtable(struct sg_table *sgt, struct scatterlist *prealloc_sg,
+ const void *buf, unsigned int buf_len)
+{
+ struct scatterlist *sg;
+ const bool is_vmalloc = is_vmalloc_addr(buf);
+ unsigned int off = offset_in_page(buf);
+ unsigned int chunk_cnt = 1;
+ unsigned int chunk_len = PAGE_ALIGN(off + buf_len);
+ int i;
+ int ret;
+
+ if (buf_len == 0) {
+ memset(sgt, 0, sizeof(*sgt));
+ return -EINVAL;
+ }
+
+ if (is_vmalloc) {
+ chunk_cnt = chunk_len >> PAGE_SHIFT;
+ chunk_len = PAGE_SIZE;
+ }
+
+ if (chunk_cnt > 1) {
+ ret = sg_alloc_table(sgt, chunk_cnt, GFP_NOFS);
+ if (ret)
+ return ret;
+ } else {
+ WARN_ON(chunk_cnt != 1);
+ sg_init_table(prealloc_sg, 1);
+ sgt->sgl = prealloc_sg;
+ sgt->nents = sgt->orig_nents = 1;
+ }
+
+ for_each_sg(sgt->sgl, sg, sgt->orig_nents, i) {
+ struct page *page;
+ unsigned int len = min(chunk_len - off, buf_len);
+
+ if (is_vmalloc)
+ page = vmalloc_to_page(buf);
+ else
+ page = virt_to_page(buf);
+
+ sg_set_page(sg, page, len, off);
+
+ off = 0;
+ buf += len;
+ buf_len -= len;
+ }
+ WARN_ON(buf_len != 0);
+
+ return 0;
+}
+
+static void teardown_sgtable(struct sg_table *sgt)
+{
+ if (sgt->orig_nents > 1)
+ sg_free_table(sgt);
+}
+
static int ceph_aes_encrypt(const void *key, int key_len,
void *dst, size_t *dst_len,
const void *src, size_t src_len)
{
- struct scatterlist sg_in[2], sg_out[1];
+ struct scatterlist sg_in[2], prealloc_sg;
+ struct sg_table sg_out;
struct crypto_blkcipher *tfm = ceph_crypto_alloc_cipher();
struct blkcipher_desc desc = { .tfm = tfm, .flags = 0 };
int ret;
*dst_len = src_len + zero_padding;
- crypto_blkcipher_setkey((void *)tfm, key, key_len);
sg_init_table(sg_in, 2);
sg_set_buf(&sg_in[0], src, src_len);
sg_set_buf(&sg_in[1], pad, zero_padding);
- sg_init_table(sg_out, 1);
- sg_set_buf(sg_out, dst, *dst_len);
+ ret = setup_sgtable(&sg_out, &prealloc_sg, dst, *dst_len);
+ if (ret)
+ goto out_tfm;
+
+ crypto_blkcipher_setkey((void *)tfm, key, key_len);
iv = crypto_blkcipher_crt(tfm)->iv;
ivsize = crypto_blkcipher_ivsize(tfm);
-
memcpy(iv, aes_iv, ivsize);
+
/*
print_hex_dump(KERN_ERR, "enc key: ", DUMP_PREFIX_NONE, 16, 1,
key, key_len, 1);
print_hex_dump(KERN_ERR, "enc pad: ", DUMP_PREFIX_NONE, 16, 1,
pad, zero_padding, 1);
*/
- ret = crypto_blkcipher_encrypt(&desc, sg_out, sg_in,
+ ret = crypto_blkcipher_encrypt(&desc, sg_out.sgl, sg_in,
src_len + zero_padding);
- crypto_free_blkcipher(tfm);
- if (ret < 0)
+ if (ret < 0) {
pr_err("ceph_aes_crypt failed %d\n", ret);
+ goto out_sg;
+ }
/*
print_hex_dump(KERN_ERR, "enc out: ", DUMP_PREFIX_NONE, 16, 1,
dst, *dst_len, 1);
*/
- return 0;
+
+out_sg:
+ teardown_sgtable(&sg_out);
+out_tfm:
+ crypto_free_blkcipher(tfm);
+ return ret;
}
static int ceph_aes_encrypt2(const void *key, int key_len, void *dst,
const void *src1, size_t src1_len,
const void *src2, size_t src2_len)
{
- struct scatterlist sg_in[3], sg_out[1];
+ struct scatterlist sg_in[3], prealloc_sg;
+ struct sg_table sg_out;
struct crypto_blkcipher *tfm = ceph_crypto_alloc_cipher();
struct blkcipher_desc desc = { .tfm = tfm, .flags = 0 };
int ret;
*dst_len = src1_len + src2_len + zero_padding;
- crypto_blkcipher_setkey((void *)tfm, key, key_len);
sg_init_table(sg_in, 3);
sg_set_buf(&sg_in[0], src1, src1_len);
sg_set_buf(&sg_in[1], src2, src2_len);
sg_set_buf(&sg_in[2], pad, zero_padding);
- sg_init_table(sg_out, 1);
- sg_set_buf(sg_out, dst, *dst_len);
+ ret = setup_sgtable(&sg_out, &prealloc_sg, dst, *dst_len);
+ if (ret)
+ goto out_tfm;
+
+ crypto_blkcipher_setkey((void *)tfm, key, key_len);
iv = crypto_blkcipher_crt(tfm)->iv;
ivsize = crypto_blkcipher_ivsize(tfm);
-
memcpy(iv, aes_iv, ivsize);
+
/*
print_hex_dump(KERN_ERR, "enc key: ", DUMP_PREFIX_NONE, 16, 1,
key, key_len, 1);
print_hex_dump(KERN_ERR, "enc pad: ", DUMP_PREFIX_NONE, 16, 1,
pad, zero_padding, 1);
*/
- ret = crypto_blkcipher_encrypt(&desc, sg_out, sg_in,
+ ret = crypto_blkcipher_encrypt(&desc, sg_out.sgl, sg_in,
src1_len + src2_len + zero_padding);
- crypto_free_blkcipher(tfm);
- if (ret < 0)
+ if (ret < 0) {
pr_err("ceph_aes_crypt2 failed %d\n", ret);
+ goto out_sg;
+ }
/*
print_hex_dump(KERN_ERR, "enc out: ", DUMP_PREFIX_NONE, 16, 1,
dst, *dst_len, 1);
*/
- return 0;
+
+out_sg:
+ teardown_sgtable(&sg_out);
+out_tfm:
+ crypto_free_blkcipher(tfm);
+ return ret;
}
static int ceph_aes_decrypt(const void *key, int key_len,
void *dst, size_t *dst_len,
const void *src, size_t src_len)
{
- struct scatterlist sg_in[1], sg_out[2];
+ struct sg_table sg_in;
+ struct scatterlist sg_out[2], prealloc_sg;
struct crypto_blkcipher *tfm = ceph_crypto_alloc_cipher();
struct blkcipher_desc desc = { .tfm = tfm };
char pad[16];
if (IS_ERR(tfm))
return PTR_ERR(tfm);
- crypto_blkcipher_setkey((void *)tfm, key, key_len);
- sg_init_table(sg_in, 1);
sg_init_table(sg_out, 2);
- sg_set_buf(sg_in, src, src_len);
sg_set_buf(&sg_out[0], dst, *dst_len);
sg_set_buf(&sg_out[1], pad, sizeof(pad));
+ ret = setup_sgtable(&sg_in, &prealloc_sg, src, src_len);
+ if (ret)
+ goto out_tfm;
+ crypto_blkcipher_setkey((void *)tfm, key, key_len);
iv = crypto_blkcipher_crt(tfm)->iv;
ivsize = crypto_blkcipher_ivsize(tfm);
-
memcpy(iv, aes_iv, ivsize);
/*
print_hex_dump(KERN_ERR, "dec in: ", DUMP_PREFIX_NONE, 16, 1,
src, src_len, 1);
*/
-
- ret = crypto_blkcipher_decrypt(&desc, sg_out, sg_in, src_len);
- crypto_free_blkcipher(tfm);
+ ret = crypto_blkcipher_decrypt(&desc, sg_out, sg_in.sgl, src_len);
if (ret < 0) {
pr_err("ceph_aes_decrypt failed %d\n", ret);
- return ret;
+ goto out_sg;
}
if (src_len <= *dst_len)
print_hex_dump(KERN_ERR, "dec out: ", DUMP_PREFIX_NONE, 16, 1,
dst, *dst_len, 1);
*/
- return 0;
+
+out_sg:
+ teardown_sgtable(&sg_in);
+out_tfm:
+ crypto_free_blkcipher(tfm);
+ return ret;
}
static int ceph_aes_decrypt2(const void *key, int key_len,
void *dst2, size_t *dst2_len,
const void *src, size_t src_len)
{
- struct scatterlist sg_in[1], sg_out[3];
+ struct sg_table sg_in;
+ struct scatterlist sg_out[3], prealloc_sg;
struct crypto_blkcipher *tfm = ceph_crypto_alloc_cipher();
struct blkcipher_desc desc = { .tfm = tfm };
char pad[16];
if (IS_ERR(tfm))
return PTR_ERR(tfm);
- sg_init_table(sg_in, 1);
- sg_set_buf(sg_in, src, src_len);
sg_init_table(sg_out, 3);
sg_set_buf(&sg_out[0], dst1, *dst1_len);
sg_set_buf(&sg_out[1], dst2, *dst2_len);
sg_set_buf(&sg_out[2], pad, sizeof(pad));
+ ret = setup_sgtable(&sg_in, &prealloc_sg, src, src_len);
+ if (ret)
+ goto out_tfm;
crypto_blkcipher_setkey((void *)tfm, key, key_len);
iv = crypto_blkcipher_crt(tfm)->iv;
ivsize = crypto_blkcipher_ivsize(tfm);
-
memcpy(iv, aes_iv, ivsize);
/*
print_hex_dump(KERN_ERR, "dec in: ", DUMP_PREFIX_NONE, 16, 1,
src, src_len, 1);
*/
-
- ret = crypto_blkcipher_decrypt(&desc, sg_out, sg_in, src_len);
- crypto_free_blkcipher(tfm);
+ ret = crypto_blkcipher_decrypt(&desc, sg_out, sg_in.sgl, src_len);
if (ret < 0) {
pr_err("ceph_aes_decrypt failed %d\n", ret);
- return ret;
+ goto out_sg;
}
if (src_len <= *dst1_len)
dst2, *dst2_len, 1);
*/
- return 0;
+out_sg:
+ teardown_sgtable(&sg_in);
+out_tfm:
+ crypto_free_blkcipher(tfm);
+ return ret;
}
IPPROTO_TCP, &sock);
if (ret)
return ret;
- sock->sk->sk_allocation = GFP_NOFS;
+ sock->sk->sk_allocation = GFP_NOFS | __GFP_MEMALLOC;
#ifdef CONFIG_LOCKDEP
lockdep_set_class(&sock->sk->sk_lock, &socket_class);
return ret;
}
+
+ sk_set_memalloc(sock->sk);
+
con->sock = sock;
return 0;
}
{
struct ceph_connection *con = container_of(work, struct ceph_connection,
work.work);
+ unsigned long pflags = current->flags;
bool fault;
+ current->flags |= PF_MEMALLOC;
+
mutex_lock(&con->mutex);
while (true) {
int ret;
con_fault_finish(con);
con->ops->put(con);
+
+ tsk_restore_flags(current, pflags, PF_MEMALLOC);
}
/*
static void __remove_osd(struct ceph_osd_client *osdc, struct ceph_osd *osd)
{
dout("__remove_osd %p\n", osd);
- BUG_ON(!list_empty(&osd->o_requests));
- BUG_ON(!list_empty(&osd->o_linger_requests));
+ WARN_ON(!list_empty(&osd->o_requests));
+ WARN_ON(!list_empty(&osd->o_linger_requests));
rb_erase(&osd->o_node, &osdc->osds);
list_del_init(&osd->o_osd_lru);
if (list_empty(&req->r_osd_item))
req->r_osd = NULL;
}
+
+ list_del_init(&req->r_req_lru_item); /* can be on notarget */
ceph_osdc_put_request(req);
}
if (req->r_osd) {
__cancel_request(req);
list_del_init(&req->r_osd_item);
+ list_del_init(&req->r_linger_osd_item);
req->r_osd = NULL;
}
static void napi_reuse_skb(struct napi_struct *napi, struct sk_buff *skb)
{
+ if (unlikely(skb->pfmemalloc)) {
+ consume_skb(skb);
+ return;
+ }
__skb_pull(skb, skb_headlen(skb));
/* restore the reserve we had after netdev_alloc_skb_ip_align() */
skb_reserve(skb, NET_SKB_PAD + NET_IP_ALIGN - skb_headroom(skb));
*/
struct net *net;
bool unregistering;
- DEFINE_WAIT(wait);
+ DEFINE_WAIT_FUNC(wait, woken_wake_function);
+ add_wait_queue(&netdev_unregistering_wq, &wait);
for (;;) {
- prepare_to_wait(&netdev_unregistering_wq, &wait,
- TASK_UNINTERRUPTIBLE);
unregistering = false;
rtnl_lock();
list_for_each_entry(net, net_list, exit_list) {
if (!unregistering)
break;
__rtnl_unlock();
- schedule();
+
+ wait_woken(&wait, TASK_UNINTERRUPTIBLE, MAX_SCHEDULE_TIMEOUT);
}
- finish_wait(&netdev_unregistering_wq, &wait);
+ remove_wait_queue(&netdev_unregistering_wq, &wait);
}
static void __net_exit default_device_exit_batch(struct list_head *net_list)
{
const struct ethtool_ops *ops = dev->ethtool_ops;
- if (!ops->get_eeprom || !ops->get_eeprom_len)
+ if (!ops->get_eeprom || !ops->get_eeprom_len ||
+ !ops->get_eeprom_len(dev))
return -EOPNOTSUPP;
return ethtool_get_any_eeprom(dev, useraddr, ops->get_eeprom,
u8 *data;
int ret = 0;
- if (!ops->set_eeprom || !ops->get_eeprom_len)
+ if (!ops->set_eeprom || !ops->get_eeprom_len ||
+ !ops->get_eeprom_len(dev))
return -EOPNOTSUPP;
if (copy_from_user(&eeprom, useraddr, sizeof(eeprom)))
{
struct net *net;
bool unregistering;
- DEFINE_WAIT(wait);
+ DEFINE_WAIT_FUNC(wait, woken_wake_function);
+ add_wait_queue(&netdev_unregistering_wq, &wait);
for (;;) {
- prepare_to_wait(&netdev_unregistering_wq, &wait,
- TASK_UNINTERRUPTIBLE);
unregistering = false;
rtnl_lock();
for_each_net(net) {
if (!unregistering)
break;
__rtnl_unlock();
- schedule();
+
+ wait_woken(&wait, TASK_UNINTERRUPTIBLE, MAX_SCHEDULE_TIMEOUT);
}
- finish_wait(&netdev_unregistering_wq, &wait);
+ remove_wait_queue(&netdev_unregistering_wq, &wait);
}
/**
goto errout;
}
if (!netlink_ns_capable(skb, net->user_ns, CAP_NET_ADMIN)) {
+ put_net(net);
err = -EPERM;
goto errout;
}
int idx = 0;
u32 portid = NETLINK_CB(cb->skb).portid;
u32 seq = cb->nlh->nlmsg_seq;
- struct nlattr *extfilt;
u32 filter_mask = 0;
- extfilt = nlmsg_find_attr(cb->nlh, sizeof(struct ifinfomsg),
- IFLA_EXT_MASK);
- if (extfilt)
- filter_mask = nla_get_u32(extfilt);
+ if (nlmsg_len(cb->nlh) > sizeof(struct ifinfomsg)) {
+ struct nlattr *extfilt;
+
+ extfilt = nlmsg_find_attr(cb->nlh, sizeof(struct ifinfomsg),
+ IFLA_EXT_MASK);
+ if (extfilt) {
+ if (nla_len(extfilt) < sizeof(filter_mask))
+ return -EINVAL;
+
+ filter_mask = nla_get_u32(extfilt);
+ }
+ }
rcu_read_lock();
for_each_netdev_rcu(net, dev) {
if (br_spec) {
nla_for_each_nested(attr, br_spec, rem) {
if (nla_type(attr) == IFLA_BRIDGE_FLAGS) {
+ if (nla_len(attr) < sizeof(flags))
+ return -EINVAL;
+
have_flags = true;
flags = nla_get_u16(attr);
break;
if (br_spec) {
nla_for_each_nested(attr, br_spec, rem) {
if (nla_type(attr) == IFLA_BRIDGE_FLAGS) {
+ if (nla_len(attr) < sizeof(flags))
+ return -EINVAL;
+
have_flags = true;
flags = nla_get_u16(attr);
break;
case SKB_FCLONE_CLONE:
fclones = container_of(skb, struct sk_buff_fclones, skb2);
- /* Warning : We must perform the atomic_dec_and_test() before
- * setting skb->fclone back to SKB_FCLONE_FREE, otherwise
- * skb_clone() could set clone_ref to 2 before our decrement.
- * Anyway, if we are going to free the structure, no need to
- * rewrite skb->fclone.
+ /* The clone portion is available for
+ * fast-cloning again.
*/
- if (atomic_dec_and_test(&fclones->fclone_ref)) {
+ skb->fclone = SKB_FCLONE_FREE;
+
+ if (atomic_dec_and_test(&fclones->fclone_ref))
kmem_cache_free(skbuff_fclone_cache, fclones);
- } else {
- /* The clone portion is available for
- * fast-cloning again.
- */
- skb->fclone = SKB_FCLONE_FREE;
- }
break;
}
}
if (skb->fclone == SKB_FCLONE_ORIG &&
n->fclone == SKB_FCLONE_FREE) {
n->fclone = SKB_FCLONE_CLONE;
- /* As our fastclone was free, clone_ref must be 1 at this point.
- * We could use atomic_inc() here, but it is faster
- * to set the final value.
- */
- atomic_set(&fclones->fclone_ref, 2);
+ atomic_inc(&fclones->fclone_ref);
} else {
if (skb_pfmemalloc(skb))
gfp_mask |= __GFP_MEMALLOC;
unsigned int skb_gso_transport_seglen(const struct sk_buff *skb)
{
const struct skb_shared_info *shinfo = skb_shinfo(skb);
+ unsigned int thlen = 0;
- if (likely(shinfo->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)))
- return tcp_hdrlen(skb) + shinfo->gso_size;
+ if (skb->encapsulation) {
+ thlen = skb_inner_transport_header(skb) -
+ skb_transport_header(skb);
+ if (likely(shinfo->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6)))
+ thlen += inner_tcp_hdrlen(skb);
+ } else if (likely(shinfo->gso_type & (SKB_GSO_TCPV4 | SKB_GSO_TCPV6))) {
+ thlen = tcp_hdrlen(skb);
+ }
/* UFO sets gso_size to the size of the fragmentation
* payload, i.e. the size of the L4 (UDP) header is already
* accounted for.
*/
- return shinfo->gso_size;
+ return thlen + shinfo->gso_size;
}
EXPORT_SYMBOL_GPL(skb_gso_transport_seglen);
#include <linux/export.h>
#include <net/ip.h>
#include <net/tso.h>
+#include <asm/unaligned.h>
/* Calculate expected number of TX descriptors */
int tso_count_descs(struct sk_buff *skb)
iph->id = htons(tso->ip_id);
iph->tot_len = htons(size + hdr_len - mac_hdr_len);
tcph = (struct tcphdr *)(hdr + skb_transport_offset(skb));
- tcph->seq = htonl(tso->tcp_seq);
+ put_unaligned_be32(tso->tcp_seq, &tcph->seq);
tso->ip_id++;
if (!is_last) {
if (!app)
return -EMSGSIZE;
- spin_lock(&dcb_lock);
+ spin_lock_bh(&dcb_lock);
list_for_each_entry(itr, &dcb_app_list, list) {
if (itr->ifindex == netdev->ifindex) {
err = nla_put(skb, DCB_ATTR_IEEE_APP, sizeof(itr->app),
&itr->app);
if (err) {
- spin_unlock(&dcb_lock);
+ spin_unlock_bh(&dcb_lock);
return -EMSGSIZE;
}
}
else
dcbx = -EOPNOTSUPP;
- spin_unlock(&dcb_lock);
+ spin_unlock_bh(&dcb_lock);
nla_nest_end(skb, app);
/* get peer info if available */
}
/* local app */
- spin_lock(&dcb_lock);
+ spin_lock_bh(&dcb_lock);
app = nla_nest_start(skb, DCB_ATTR_CEE_APP_TABLE);
if (!app)
goto dcb_unlock;
else
dcbx = -EOPNOTSUPP;
- spin_unlock(&dcb_lock);
+ spin_unlock_bh(&dcb_lock);
/* features flags */
if (ops->getfeatcfg) {
return 0;
dcb_unlock:
- spin_unlock(&dcb_lock);
+ spin_unlock_bh(&dcb_lock);
nla_put_failure:
return err;
}
struct dcb_app_type *itr;
u8 prio = 0;
- spin_lock(&dcb_lock);
+ spin_lock_bh(&dcb_lock);
if ((itr = dcb_app_lookup(app, dev->ifindex, 0)))
prio = itr->app.priority;
- spin_unlock(&dcb_lock);
+ spin_unlock_bh(&dcb_lock);
return prio;
}
if (dev->dcbnl_ops->getdcbx)
event.dcbx = dev->dcbnl_ops->getdcbx(dev);
- spin_lock(&dcb_lock);
+ spin_lock_bh(&dcb_lock);
/* Search for existing match and replace */
if ((itr = dcb_app_lookup(new, dev->ifindex, 0))) {
if (new->priority)
if (new->priority)
err = dcb_app_add(new, dev->ifindex);
out:
- spin_unlock(&dcb_lock);
+ spin_unlock_bh(&dcb_lock);
if (!err)
call_dcbevent_notifiers(DCB_APP_EVENT, &event);
return err;
struct dcb_app_type *itr;
u8 prio = 0;
- spin_lock(&dcb_lock);
+ spin_lock_bh(&dcb_lock);
if ((itr = dcb_app_lookup(app, dev->ifindex, 0)))
prio |= 1 << itr->app.priority;
- spin_unlock(&dcb_lock);
+ spin_unlock_bh(&dcb_lock);
return prio;
}
if (dev->dcbnl_ops->getdcbx)
event.dcbx = dev->dcbnl_ops->getdcbx(dev);
- spin_lock(&dcb_lock);
+ spin_lock_bh(&dcb_lock);
/* Search for existing match and abort if found */
if (dcb_app_lookup(new, dev->ifindex, new->priority)) {
err = -EEXIST;
err = dcb_app_add(new, dev->ifindex);
out:
- spin_unlock(&dcb_lock);
+ spin_unlock_bh(&dcb_lock);
if (!err)
call_dcbevent_notifiers(DCB_APP_EVENT, &event);
return err;
if (dev->dcbnl_ops->getdcbx)
event.dcbx = dev->dcbnl_ops->getdcbx(dev);
- spin_lock(&dcb_lock);
+ spin_lock_bh(&dcb_lock);
/* Search for existing match and remove it. */
if ((itr = dcb_app_lookup(del, dev->ifindex, del->priority))) {
list_del(&itr->list);
err = 0;
}
- spin_unlock(&dcb_lock);
+ spin_unlock_bh(&dcb_lock);
if (!err)
call_dcbevent_notifiers(DCB_APP_EVENT, &event);
return err;
struct dcb_app_type *app;
struct dcb_app_type *tmp;
- spin_lock(&dcb_lock);
+ spin_lock_bh(&dcb_lock);
list_for_each_entry_safe(app, tmp, &dcb_app_list, list) {
list_del(&app->list);
kfree(app);
}
- spin_unlock(&dcb_lock);
+ spin_unlock_bh(&dcb_lock);
}
static int __init dcbnl_init(void)
dst->rcv = brcm_netdev_ops.rcv;
break;
#endif
- default:
+ case DSA_TAG_PROTO_NONE:
break;
+ default:
+ ret = -ENOPROTOOPT;
+ goto out;
}
dst->tag_protocol = drv->tag_protocol;
/* We could not connect to a designated PHY, so use the switch internal
* MDIO bus instead
*/
- if (!p->phy)
+ if (!p->phy) {
p->phy = ds->slave_mii_bus->phy_map[p->port];
- else
+ phy_connect_direct(slave_dev, p->phy, dsa_slave_adjust_link,
+ p->phy_interface);
+ } else {
pr_info("attached PHY at address %d [%s]\n",
p->phy->addr, p->phy->drv->name);
+ }
}
int dsa_slave_suspend(struct net_device *slave_dev)
encap = SKB_GSO_CB(skb)->encap_level > 0;
if (encap)
- features = skb->dev->hw_enc_features & netif_skb_features(skb);
+ features &= skb->dev->hw_enc_features;
SKB_GSO_CB(skb)->encap_level += ihl;
skb_reset_transport_header(skb);
return pp;
}
+int inet_recv_error(struct sock *sk, struct msghdr *msg, int len, int *addr_len)
+{
+ if (sk->sk_family == AF_INET)
+ return ip_recv_error(sk, msg, len, addr_len);
+#if IS_ENABLED(CONFIG_IPV6)
+ if (sk->sk_family == AF_INET6)
+ return pingv6_ops.ipv6_recv_error(sk, msg, len, addr_len);
+#endif
+ return -EINVAL;
+}
+
static int inet_gro_complete(struct sk_buff *skb, int nhoff)
{
__be16 newlen = htons(skb->len - nhoff);
else
res->tclassid = 0;
#endif
+
+ if (err == -ESRCH)
+ err = -ENETUNREACH;
+
return err;
}
EXPORT_SYMBOL_GPL(__fib_lookup);
int err = -ENOSYS;
const struct net_offload **offloads;
+ udp_tunnel_gro_complete(skb, nhoff);
+
rcu_read_lock();
offloads = NAPI_GRO_CB(skb)->is_ipv6 ? inet6_offloads : inet_offloads;
ops = rcu_dereference(offloads[proto]);
gnvh = (struct genevehdr *)__skb_push(skb, sizeof(*gnvh) + opt_len);
geneve_build_header(gnvh, tun_flags, vni, opt_len, opt);
+ skb_set_inner_protocol(skb, htons(ETH_P_TEB));
+
return udp_tunnel_xmit_skb(gs->sock, rt, skb, src, dst,
tos, ttl, df, src_port, dst_port, xnet);
}
static void __exit geneve_cleanup_module(void)
{
destroy_workqueue(geneve_wq);
+ unregister_pernet_subsys(&geneve_net_ops);
}
module_exit(geneve_cleanup_module);
greh = (struct gre_base_hdr *)skb_transport_header(skb);
- ghl = skb_inner_network_header(skb) - skb_transport_header(skb);
+ ghl = skb_inner_mac_header(skb) - skb_transport_header(skb);
if (unlikely(ghl < sizeof(*greh)))
goto out;
skb->mac_len = skb_inner_network_offset(skb);
/* segment inner packet. */
- enc_features = skb->dev->hw_enc_features & netif_skb_features(skb);
+ enc_features = skb->dev->hw_enc_features & features;
segs = skb_mac_gso_segment(skb, enc_features);
if (IS_ERR_OR_NULL(segs)) {
skb_gso_error_unwind(skb, protocol, ghl, mac_offset, mac_len);
return scount;
}
-#define igmp_skb_size(skb) (*(unsigned int *)((skb)->cb))
-
-static struct sk_buff *igmpv3_newpack(struct net_device *dev, int size)
+static struct sk_buff *igmpv3_newpack(struct net_device *dev, unsigned int mtu)
{
struct sk_buff *skb;
struct rtable *rt;
struct flowi4 fl4;
int hlen = LL_RESERVED_SPACE(dev);
int tlen = dev->needed_tailroom;
+ unsigned int size = mtu;
while (1) {
skb = alloc_skb(size + hlen + tlen,
return NULL;
}
skb->priority = TC_PRIO_CONTROL;
- igmp_skb_size(skb) = size;
rt = ip_route_output_ports(net, &fl4, NULL, IGMPV3_ALL_MCR, 0,
0, 0,
skb_dst_set(skb, &rt->dst);
skb->dev = dev;
+ skb->reserved_tailroom = skb_end_offset(skb) -
+ min(mtu, skb_end_offset(skb));
skb_reserve(skb, hlen);
skb_reset_network_header(skb);
return skb;
}
-#define AVAILABLE(skb) ((skb) ? ((skb)->dev ? igmp_skb_size(skb) - (skb)->len : \
- skb_tailroom(skb)) : 0)
+#define AVAILABLE(skb) ((skb) ? skb_availroom(skb) : 0)
static struct sk_buff *add_grec(struct sk_buff *skb, struct ip_mc_list *pmc,
int type, int gdeleted, int sdeleted)
atomic_inc(&fq->refcnt);
spin_unlock(&hb->chain_lock);
del_timer_sync(&fq->timer);
- WARN_ON(atomic_read(&fq->refcnt) != 1);
inet_frag_put(fq, f);
goto evict_again;
}
struct inet_frag_bucket *hb;
hb = get_frag_bucket_locked(fq, f);
- hlist_del(&fq->list);
+ if (!(fq->flags & INET_FRAG_EVICTED))
+ hlist_del(&fq->list);
spin_unlock(&hb->chain_lock);
}
*/
features = netif_skb_features(skb);
segs = skb_gso_segment(skb, features & ~NETIF_F_GSO_MASK);
- if (IS_ERR(segs)) {
+ if (IS_ERR_OR_NULL(segs)) {
kfree_skb(skb);
return -ENOMEM;
}
for (cmsg = CMSG_FIRSTHDR(msg); cmsg; cmsg = CMSG_NXTHDR(msg, cmsg)) {
if (!CMSG_OK(msg, cmsg))
return -EINVAL;
-#if defined(CONFIG_IPV6)
+#if IS_ENABLED(CONFIG_IPV6)
if (allow_ipv6 &&
cmsg->cmsg_level == SOL_IPV6 &&
cmsg->cmsg_type == IPV6_PKTINFO) {
.validate = vti_tunnel_validate,
.newlink = vti_newlink,
.changelink = vti_changelink,
+ .dellink = ip_tunnel_dellink,
.get_size = vti_get_size,
.fill_info = vti_fill_info,
};
* published by the Free Software Foundation.
*/
+#include <linux/module.h>
#include <net/ip.h>
#include <net/tcp.h>
#include <net/route.h>
#include <net/dst.h>
#include <linux/netfilter_ipv4.h>
+#include <net/netfilter/ipv4/nf_reject.h>
-/* Send RST reply */
-void nf_send_reset(struct sk_buff *oldskb, int hook)
+const struct tcphdr *nf_reject_ip_tcphdr_get(struct sk_buff *oldskb,
+ struct tcphdr *_oth, int hook)
{
- struct sk_buff *nskb;
- const struct iphdr *oiph;
- struct iphdr *niph;
const struct tcphdr *oth;
- struct tcphdr _otcph, *tcph;
/* IP header checks: fragment. */
if (ip_hdr(oldskb)->frag_off & htons(IP_OFFSET))
- return;
+ return NULL;
oth = skb_header_pointer(oldskb, ip_hdrlen(oldskb),
- sizeof(_otcph), &_otcph);
+ sizeof(struct tcphdr), _oth);
if (oth == NULL)
- return;
+ return NULL;
/* No RST for RST. */
if (oth->rst)
- return;
-
- if (skb_rtable(oldskb)->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST))
- return;
+ return NULL;
/* Check checksum */
if (nf_ip_checksum(oldskb, hook, ip_hdrlen(oldskb), IPPROTO_TCP))
- return;
- oiph = ip_hdr(oldskb);
+ return NULL;
- nskb = alloc_skb(sizeof(struct iphdr) + sizeof(struct tcphdr) +
- LL_MAX_HEADER, GFP_ATOMIC);
- if (!nskb)
- return;
+ return oth;
+}
+EXPORT_SYMBOL_GPL(nf_reject_ip_tcphdr_get);
- skb_reserve(nskb, LL_MAX_HEADER);
+struct iphdr *nf_reject_iphdr_put(struct sk_buff *nskb,
+ const struct sk_buff *oldskb,
+ __be16 protocol, int ttl)
+{
+ struct iphdr *niph, *oiph = ip_hdr(oldskb);
skb_reset_network_header(nskb);
niph = (struct iphdr *)skb_put(nskb, sizeof(struct iphdr));
niph->tos = 0;
niph->id = 0;
niph->frag_off = htons(IP_DF);
- niph->protocol = IPPROTO_TCP;
+ niph->protocol = protocol;
niph->check = 0;
niph->saddr = oiph->daddr;
niph->daddr = oiph->saddr;
+ niph->ttl = ttl;
+
+ nskb->protocol = htons(ETH_P_IP);
+
+ return niph;
+}
+EXPORT_SYMBOL_GPL(nf_reject_iphdr_put);
+
+void nf_reject_ip_tcphdr_put(struct sk_buff *nskb, const struct sk_buff *oldskb,
+ const struct tcphdr *oth)
+{
+ struct iphdr *niph = ip_hdr(nskb);
+ struct tcphdr *tcph;
skb_reset_transport_header(nskb);
tcph = (struct tcphdr *)skb_put(nskb, sizeof(struct tcphdr));
tcph->dest = oth->source;
tcph->doff = sizeof(struct tcphdr) / 4;
- if (oth->ack)
+ if (oth->ack) {
tcph->seq = oth->ack_seq;
- else {
+ } else {
tcph->ack_seq = htonl(ntohl(oth->seq) + oth->syn + oth->fin +
oldskb->len - ip_hdrlen(oldskb) -
(oth->doff << 2));
nskb->ip_summed = CHECKSUM_PARTIAL;
nskb->csum_start = (unsigned char *)tcph - nskb->head;
nskb->csum_offset = offsetof(struct tcphdr, check);
+}
+EXPORT_SYMBOL_GPL(nf_reject_ip_tcphdr_put);
+
+/* Send RST reply */
+void nf_send_reset(struct sk_buff *oldskb, int hook)
+{
+ struct sk_buff *nskb;
+ const struct iphdr *oiph;
+ struct iphdr *niph;
+ const struct tcphdr *oth;
+ struct tcphdr _oth;
+
+ oth = nf_reject_ip_tcphdr_get(oldskb, &_oth, hook);
+ if (!oth)
+ return;
+
+ if (skb_rtable(oldskb)->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST))
+ return;
+
+ oiph = ip_hdr(oldskb);
+
+ nskb = alloc_skb(sizeof(struct iphdr) + sizeof(struct tcphdr) +
+ LL_MAX_HEADER, GFP_ATOMIC);
+ if (!nskb)
+ return;
/* ip_route_me_harder expects skb->dst to be set */
skb_dst_set_noref(nskb, skb_dst(oldskb));
- nskb->protocol = htons(ETH_P_IP);
+ skb_reserve(nskb, LL_MAX_HEADER);
+ niph = nf_reject_iphdr_put(nskb, oldskb, IPPROTO_TCP,
+ ip4_dst_hoplimit(skb_dst(nskb)));
+ nf_reject_ip_tcphdr_put(nskb, oldskb, oth);
+
if (ip_route_me_harder(nskb, RTN_UNSPEC))
goto free_nskb;
- niph->ttl = ip4_dst_hoplimit(skb_dst(nskb));
-
/* "Never happens" */
if (nskb->len > dst_mtu(skb_dst(nskb)))
goto free_nskb;
kfree_skb(nskb);
}
EXPORT_SYMBOL_GPL(nf_send_reset);
+
+MODULE_LICENSE("GPL");
struct nf_nat_range range;
unsigned int verdict;
+ memset(&range, 0, sizeof(range));
range.flags = priv->flags;
verdict = nf_nat_masquerade_ipv4(pkt->skb, pkt->ops->hooknum,
.eval = nft_masq_ipv4_eval,
.init = nft_masq_init,
.dump = nft_masq_dump,
+ .validate = nft_masq_validate,
};
static struct nft_expr_type nft_masq_ipv4_type __read_mostly = {
&ipv6_hdr(skb)->daddr))
continue;
#endif
+ } else {
+ continue;
}
if (sk->sk_bound_dev_if && sk->sk_bound_dev_if != dif)
if (flags & MSG_OOB)
goto out;
- if (flags & MSG_ERRQUEUE) {
- if (family == AF_INET) {
- return ip_recv_error(sk, msg, len, addr_len);
-#if IS_ENABLED(CONFIG_IPV6)
- } else if (family == AF_INET6) {
- return pingv6_ops.ipv6_recv_error(sk, msg, len,
- addr_len);
-#endif
- }
- }
+ if (flags & MSG_ERRQUEUE)
+ return inet_recv_error(sk, msg, len, addr_len);
skb = skb_recv_datagram(sk, flags, noblock, &err);
if (!skb)
no_route:
RT_CACHE_STAT_INC(in_no_route);
res.type = RTN_UNREACHABLE;
+ res.fi = NULL;
goto local_input;
/*
u32 urg_hole = 0;
if (unlikely(flags & MSG_ERRQUEUE))
- return ip_recv_error(sk, msg, len, addr_len);
+ return inet_recv_error(sk, msg, len, addr_len);
if (sk_can_busy_loop(sk) && skb_queue_empty(&sk->sk_receive_queue) &&
(sk->sk_state == TCP_ESTABLISHED))
#endif
#ifdef CONFIG_TCP_MD5SIG
-static struct tcp_md5sig_pool __percpu *tcp_md5sig_pool __read_mostly;
+static DEFINE_PER_CPU(struct tcp_md5sig_pool, tcp_md5sig_pool);
static DEFINE_MUTEX(tcp_md5sig_mutex);
-
-static void __tcp_free_md5sig_pool(struct tcp_md5sig_pool __percpu *pool)
-{
- int cpu;
-
- for_each_possible_cpu(cpu) {
- struct tcp_md5sig_pool *p = per_cpu_ptr(pool, cpu);
-
- if (p->md5_desc.tfm)
- crypto_free_hash(p->md5_desc.tfm);
- }
- free_percpu(pool);
-}
+static bool tcp_md5sig_pool_populated = false;
static void __tcp_alloc_md5sig_pool(void)
{
int cpu;
- struct tcp_md5sig_pool __percpu *pool;
-
- pool = alloc_percpu(struct tcp_md5sig_pool);
- if (!pool)
- return;
for_each_possible_cpu(cpu) {
- struct crypto_hash *hash;
-
- hash = crypto_alloc_hash("md5", 0, CRYPTO_ALG_ASYNC);
- if (IS_ERR_OR_NULL(hash))
- goto out_free;
+ if (!per_cpu(tcp_md5sig_pool, cpu).md5_desc.tfm) {
+ struct crypto_hash *hash;
- per_cpu_ptr(pool, cpu)->md5_desc.tfm = hash;
+ hash = crypto_alloc_hash("md5", 0, CRYPTO_ALG_ASYNC);
+ if (IS_ERR_OR_NULL(hash))
+ return;
+ per_cpu(tcp_md5sig_pool, cpu).md5_desc.tfm = hash;
+ }
}
- /* before setting tcp_md5sig_pool, we must commit all writes
- * to memory. See ACCESS_ONCE() in tcp_get_md5sig_pool()
+ /* before setting tcp_md5sig_pool_populated, we must commit all writes
+ * to memory. See smp_rmb() in tcp_get_md5sig_pool()
*/
smp_wmb();
- tcp_md5sig_pool = pool;
- return;
-out_free:
- __tcp_free_md5sig_pool(pool);
+ tcp_md5sig_pool_populated = true;
}
bool tcp_alloc_md5sig_pool(void)
{
- if (unlikely(!tcp_md5sig_pool)) {
+ if (unlikely(!tcp_md5sig_pool_populated)) {
mutex_lock(&tcp_md5sig_mutex);
- if (!tcp_md5sig_pool)
+ if (!tcp_md5sig_pool_populated)
__tcp_alloc_md5sig_pool();
mutex_unlock(&tcp_md5sig_mutex);
}
- return tcp_md5sig_pool != NULL;
+ return tcp_md5sig_pool_populated;
}
EXPORT_SYMBOL(tcp_alloc_md5sig_pool);
*/
struct tcp_md5sig_pool *tcp_get_md5sig_pool(void)
{
- struct tcp_md5sig_pool __percpu *p;
-
local_bh_disable();
- p = ACCESS_ONCE(tcp_md5sig_pool);
- if (p)
- return raw_cpu_ptr(p);
+ if (tcp_md5sig_pool_populated) {
+ /* coupled with smp_wmb() in __tcp_alloc_md5sig_pool() */
+ smp_rmb();
+ return this_cpu_ptr(&tcp_md5sig_pool);
+ }
local_bh_enable();
return NULL;
}
/* Undo procedures. */
+/* We can clear retrans_stamp when there are no retransmissions in the
+ * window. It would seem that it is trivially available for us in
+ * tp->retrans_out, however, that kind of assumptions doesn't consider
+ * what will happen if errors occur when sending retransmission for the
+ * second time. ...It could the that such segment has only
+ * TCPCB_EVER_RETRANS set at the present time. It seems that checking
+ * the head skb is enough except for some reneging corner cases that
+ * are not worth the effort.
+ *
+ * Main reason for all this complexity is the fact that connection dying
+ * time now depends on the validity of the retrans_stamp, in particular,
+ * that successive retransmissions of a segment must not advance
+ * retrans_stamp under any conditions.
+ */
+static bool tcp_any_retrans_done(const struct sock *sk)
+{
+ const struct tcp_sock *tp = tcp_sk(sk);
+ struct sk_buff *skb;
+
+ if (tp->retrans_out)
+ return true;
+
+ skb = tcp_write_queue_head(sk);
+ if (unlikely(skb && TCP_SKB_CB(skb)->sacked & TCPCB_EVER_RETRANS))
+ return true;
+
+ return false;
+}
+
#if FASTRETRANS_DEBUG > 1
static void DBGUNDO(struct sock *sk, const char *msg)
{
* is ACKed. For Reno it is MUST to prevent false
* fast retransmits (RFC2582). SACK TCP is safe. */
tcp_moderate_cwnd(tp);
+ if (!tcp_any_retrans_done(sk))
+ tp->retrans_stamp = 0;
return true;
}
tcp_set_ca_state(sk, TCP_CA_Open);
return false;
}
-/* We can clear retrans_stamp when there are no retransmissions in the
- * window. It would seem that it is trivially available for us in
- * tp->retrans_out, however, that kind of assumptions doesn't consider
- * what will happen if errors occur when sending retransmission for the
- * second time. ...It could the that such segment has only
- * TCPCB_EVER_RETRANS set at the present time. It seems that checking
- * the head skb is enough except for some reneging corner cases that
- * are not worth the effort.
- *
- * Main reason for all this complexity is the fact that connection dying
- * time now depends on the validity of the retrans_stamp, in particular,
- * that successive retransmissions of a segment must not advance
- * retrans_stamp under any conditions.
- */
-static bool tcp_any_retrans_done(const struct sock *sk)
-{
- const struct tcp_sock *tp = tcp_sk(sk);
- struct sk_buff *skb;
-
- if (tp->retrans_out)
- return true;
-
- skb = tcp_write_queue_head(sk);
- if (unlikely(skb && TCP_SKB_CB(skb)->sacked & TCPCB_EVER_RETRANS))
- return true;
-
- return false;
-}
-
/* Undo during loss recovery after partial ACK or using F-RTO. */
static bool tcp_try_undo_loss(struct sock *sk, bool frto_undo)
{
if (len < (th->doff << 2) || tcp_checksum_complete_user(sk, skb))
goto csum_error;
- if (!th->ack && !th->rst)
+ if (!th->ack && !th->rst && !th->syn)
goto discard;
/*
goto discard;
}
- if (!th->ack && !th->rst)
+ if (!th->ack && !th->rst && !th->syn)
goto discard;
if (!tcp_validate_incoming(sk, skb, th, 0))
inet->inet_dport = usin->sin_port;
inet->inet_daddr = daddr;
- inet_set_txhash(sk);
-
inet_csk(sk)->icsk_ext_hdr_len = 0;
if (inet_opt)
inet_csk(sk)->icsk_ext_hdr_len = inet_opt->opt.optlen;
if (err)
goto failure;
+ inet_set_txhash(sk);
+
rt = ip_route_newports(fl4, rt, orig_sport, orig_dport,
inet->inet_sport, inet->inet_dport, sk);
if (IS_ERR(rt)) {
if (th->rst)
return;
- if (skb_rtable(skb)->rt_type != RTN_LOCAL)
+ /* If sk not NULL, it means we did a successful lookup and incoming
+ * route had to be correct. prequeue might have dropped our dst.
+ */
+ if (!sk && skb_rtable(skb)->rt_type != RTN_LOCAL)
return;
/* Swap the send and the receive. */
static bool skb_still_in_host_queue(const struct sock *sk,
const struct sk_buff *skb)
{
- if (unlikely(skb_fclone_busy(skb))) {
+ if (unlikely(skb_fclone_busy(sk, skb))) {
NET_INC_STATS_BH(sock_net(sk),
LINUX_MIB_TCPSPURIOUS_RTX_HOSTQUEUES);
return true;
skb->encap_hdr_csum = 1;
/* segment inner packet. */
- enc_features = skb->dev->hw_enc_features & netif_skb_features(skb);
+ enc_features = skb->dev->hw_enc_features & features;
segs = gso_inner_segment(skb, enc_features);
if (IS_ERR_OR_NULL(segs)) {
skb_gso_error_unwind(skb, protocol, tnl_hlen, mac_offset,
}
write_unlock_bh(&idev->lock);
+ inet6_ifinfo_notify(RTM_NEWLINK, idev);
addrconf_verify_rtnl();
return 0;
}
skb->protocol = gre_proto;
/* WCCP version 1 and 2 protocol decoding.
- * - Change protocol to IP
+ * - Change protocol to IPv6
* - When dealing with WCCPv2, Skip extra 4 bytes in GRE header
*/
if (flags == 0 && gre_proto == htons(ETH_P_WCCP)) {
- skb->protocol = htons(ETH_P_IP);
+ skb->protocol = htons(ETH_P_IPV6);
if ((*(h + offset) & 0xF0) != 0x40)
offset += 4;
}
else
dev->flags &= ~IFF_POINTOPOINT;
- dev->iflink = p->link;
-
/* Precalculate GRE options length */
if (t->parms.o_flags&(GRE_CSUM|GRE_KEY|GRE_SEQ)) {
if (t->parms.o_flags&GRE_CSUM)
u64_stats_init(&ip6gre_tunnel_stats->syncp);
}
+ dev->iflink = tunnel->parms.link;
return 0;
}
if (!dev->tstats)
return -ENOMEM;
+ dev->iflink = tunnel->parms.link;
+
return 0;
}
int nhoff;
if (unlikely(skb_shinfo(skb)->gso_type &
- ~(SKB_GSO_UDP |
+ ~(SKB_GSO_TCPV4 |
+ SKB_GSO_UDP |
SKB_GSO_DODGY |
SKB_GSO_TCP_ECN |
SKB_GSO_GRE |
encap = SKB_GSO_CB(skb)->encap_level > 0;
if (encap)
- features = skb->dev->hw_enc_features & netif_skb_features(skb);
+ features &= skb->dev->hw_enc_features;
SKB_GSO_CB(skb)->encap_level += sizeof(*ipv6h);
ipv6h = ipv6_hdr(skb);
int err;
t = netdev_priv(dev);
- err = ip6_tnl_dev_init(dev);
- if (err < 0)
- goto out;
err = register_netdevice(dev);
if (err < 0)
static const struct net_device_ops ip6_tnl_netdev_ops = {
+ .ndo_init = ip6_tnl_dev_init,
.ndo_uninit = ip6_tnl_dev_uninit,
.ndo_start_xmit = ip6_tnl_xmit,
.ndo_do_ioctl = ip6_tnl_ioctl,
struct ip6_tnl *t = netdev_priv(dev);
struct net *net = dev_net(dev);
struct ip6_tnl_net *ip6n = net_generic(net, ip6_tnl_net_id);
- int err = ip6_tnl_dev_init_gen(dev);
-
- if (err)
- return err;
t->parms.proto = IPPROTO_IPV6;
dev_hold(dev);
- ip6_tnl_link_config(t);
-
rcu_assign_pointer(ip6n->tnls_wc[0], t);
return 0;
}
uh->source = src_port;
uh->len = htons(skb->len);
- uh->check = 0;
memset(&(IPCB(skb)->opt), 0, sizeof(IPCB(skb)->opt));
IPCB(skb)->flags &= ~(IPSKB_XFRM_TUNNEL_SIZE | IPSKB_XFRM_TRANSFORMED
| IPSKB_REROUTED);
skb_dst_set(skb, dst);
- udp6_set_csum(udp_get_no_check6_tx(sk), skb, &inet6_sk(sk)->saddr,
- &sk->sk_v6_daddr, skb->len);
+ udp6_set_csum(udp_get_no_check6_tx(sk), skb, saddr, daddr, skb->len);
__skb_push(skb, sizeof(*ip6h));
skb_reset_network_header(skb);
struct vti6_net *ip6n = net_generic(net, vti6_net_id);
int err;
- err = vti6_dev_init(dev);
- if (err < 0)
- goto out;
-
err = register_netdevice(dev);
if (err < 0)
goto out;
}
static const struct net_device_ops vti6_netdev_ops = {
+ .ndo_init = vti6_dev_init,
.ndo_uninit = vti6_dev_uninit,
.ndo_start_xmit = vti6_tnl_xmit,
.ndo_do_ioctl = vti6_ioctl,
struct ip6_tnl *t = netdev_priv(dev);
struct net *net = dev_net(dev);
struct vti6_net *ip6n = net_generic(net, vti6_net_id);
- int err = vti6_dev_init_gen(dev);
-
- if (err)
- return err;
t->parms.proto = IPPROTO_IPV6;
dev_hold(dev);
- vti6_link_config(t);
-
rcu_assign_pointer(ip6n->tnls_wc[0], t);
return 0;
}
return vti6_tnl_create2(dev);
}
+static void vti6_dellink(struct net_device *dev, struct list_head *head)
+{
+ struct net *net = dev_net(dev);
+ struct vti6_net *ip6n = net_generic(net, vti6_net_id);
+
+ if (dev != ip6n->fb_tnl_dev)
+ unregister_netdevice_queue(dev, head);
+}
+
static int vti6_changelink(struct net_device *dev, struct nlattr *tb[],
struct nlattr *data[])
{
.setup = vti6_dev_setup,
.validate = vti6_validate,
.newlink = vti6_newlink,
+ .dellink = vti6_dellink,
.changelink = vti6_changelink,
.get_size = vti6_get_size,
.fill_info = vti6_fill_info,
if (!ip6n->fb_tnl_dev)
goto err_alloc_dev;
dev_net_set(ip6n->fb_tnl_dev, net);
+ ip6n->fb_tnl_dev->rtnl_link_ops = &vti6_link_ops;
err = vti6_fb_tnl_dev_init(ip6n->fb_tnl_dev);
if (err < 0)
void ip6_mr_cleanup(void)
{
+ rtnl_unregister(RTNL_FAMILY_IP6MR, RTM_GETROUTE);
+#ifdef CONFIG_IPV6_PIMSM_V2
+ inet6_del_protocol(&pim6_protocol, IPPROTO_PIM);
+#endif
unregister_netdevice_notifier(&ip6_mr_notifier);
unregister_pernet_subsys(&ip6mr_net_ops);
kmem_cache_destroy(mrt_cachep);
hdr->daddr = *daddr;
}
-static struct sk_buff *mld_newpack(struct inet6_dev *idev, int size)
+static struct sk_buff *mld_newpack(struct inet6_dev *idev, unsigned int mtu)
{
struct net_device *dev = idev->dev;
struct net *net = dev_net(dev);
const struct in6_addr *saddr;
int hlen = LL_RESERVED_SPACE(dev);
int tlen = dev->needed_tailroom;
+ unsigned int size = mtu + hlen + tlen;
int err;
u8 ra[8] = { IPPROTO_ICMPV6, 0,
IPV6_TLV_ROUTERALERT, 2, 0, 0,
IPV6_TLV_PADN, 0 };
/* we assume size > sizeof(ra) here */
- size += hlen + tlen;
/* limit our allocations to order-0 page */
size = min_t(int, size, SKB_MAX_ORDER(0, 0));
skb = sock_alloc_send_skb(sk, size, 1, &err);
return NULL;
skb->priority = TC_PRIO_CONTROL;
+ skb->reserved_tailroom = skb_end_offset(skb) -
+ min(mtu, skb_end_offset(skb));
skb_reserve(skb, hlen);
if (__ipv6_get_lladdr(idev, &addr_buf, IFA_F_TENTATIVE)) {
return skb;
}
-#define AVAILABLE(skb) ((skb) ? ((skb)->dev ? (skb)->dev->mtu - (skb)->len : \
- skb_tailroom(skb)) : 0)
+#define AVAILABLE(skb) ((skb) ? skb_availroom(skb) : 0)
static struct sk_buff *add_grec(struct sk_buff *skb, struct ifmcaddr6 *pmc,
int type, int gdeleted, int sdeleted, int crsend)
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
+
+#include <linux/module.h>
#include <net/ipv6.h>
#include <net/ip6_route.h>
#include <net/ip6_fib.h>
#include <net/ip6_checksum.h>
#include <linux/netfilter_ipv6.h>
+#include <net/netfilter/ipv6/nf_reject.h>
-void nf_send_reset6(struct net *net, struct sk_buff *oldskb, int hook)
+const struct tcphdr *nf_reject_ip6_tcphdr_get(struct sk_buff *oldskb,
+ struct tcphdr *otcph,
+ unsigned int *otcplen, int hook)
{
- struct sk_buff *nskb;
- struct tcphdr otcph, *tcph;
- unsigned int otcplen, hh_len;
- int tcphoff, needs_ack;
const struct ipv6hdr *oip6h = ipv6_hdr(oldskb);
- struct ipv6hdr *ip6h;
-#define DEFAULT_TOS_VALUE 0x0U
- const __u8 tclass = DEFAULT_TOS_VALUE;
- struct dst_entry *dst = NULL;
u8 proto;
__be16 frag_off;
- struct flowi6 fl6;
-
- if ((!(ipv6_addr_type(&oip6h->saddr) & IPV6_ADDR_UNICAST)) ||
- (!(ipv6_addr_type(&oip6h->daddr) & IPV6_ADDR_UNICAST))) {
- pr_debug("addr is not unicast.\n");
- return;
- }
+ int tcphoff;
proto = oip6h->nexthdr;
- tcphoff = ipv6_skip_exthdr(oldskb, ((u8*)(oip6h+1) - oldskb->data), &proto, &frag_off);
+ tcphoff = ipv6_skip_exthdr(oldskb, ((u8*)(oip6h+1) - oldskb->data),
+ &proto, &frag_off);
if ((tcphoff < 0) || (tcphoff > oldskb->len)) {
pr_debug("Cannot get TCP header.\n");
- return;
+ return NULL;
}
- otcplen = oldskb->len - tcphoff;
+ *otcplen = oldskb->len - tcphoff;
/* IP header checks: fragment, too short. */
- if (proto != IPPROTO_TCP || otcplen < sizeof(struct tcphdr)) {
- pr_debug("proto(%d) != IPPROTO_TCP, "
- "or too short. otcplen = %d\n",
- proto, otcplen);
- return;
+ if (proto != IPPROTO_TCP || *otcplen < sizeof(struct tcphdr)) {
+ pr_debug("proto(%d) != IPPROTO_TCP or too short (len = %d)\n",
+ proto, *otcplen);
+ return NULL;
}
- if (skb_copy_bits(oldskb, tcphoff, &otcph, sizeof(struct tcphdr)))
- BUG();
+ otcph = skb_header_pointer(oldskb, tcphoff, sizeof(struct tcphdr),
+ otcph);
+ if (otcph == NULL)
+ return NULL;
/* No RST for RST. */
- if (otcph.rst) {
+ if (otcph->rst) {
pr_debug("RST is set\n");
- return;
+ return NULL;
}
/* Check checksum. */
if (nf_ip6_checksum(oldskb, hook, tcphoff, IPPROTO_TCP)) {
pr_debug("TCP checksum is invalid\n");
- return;
+ return NULL;
}
- memset(&fl6, 0, sizeof(fl6));
- fl6.flowi6_proto = IPPROTO_TCP;
- fl6.saddr = oip6h->daddr;
- fl6.daddr = oip6h->saddr;
- fl6.fl6_sport = otcph.dest;
- fl6.fl6_dport = otcph.source;
- security_skb_classify_flow(oldskb, flowi6_to_flowi(&fl6));
- dst = ip6_route_output(net, NULL, &fl6);
- if (dst == NULL || dst->error) {
- dst_release(dst);
- return;
- }
- dst = xfrm_lookup(net, dst, flowi6_to_flowi(&fl6), NULL, 0);
- if (IS_ERR(dst))
- return;
-
- hh_len = (dst->dev->hard_header_len + 15)&~15;
- nskb = alloc_skb(hh_len + 15 + dst->header_len + sizeof(struct ipv6hdr)
- + sizeof(struct tcphdr) + dst->trailer_len,
- GFP_ATOMIC);
-
- if (!nskb) {
- net_dbg_ratelimited("cannot alloc skb\n");
- dst_release(dst);
- return;
- }
-
- skb_dst_set(nskb, dst);
+ return otcph;
+}
+EXPORT_SYMBOL_GPL(nf_reject_ip6_tcphdr_get);
- skb_reserve(nskb, hh_len + dst->header_len);
+struct ipv6hdr *nf_reject_ip6hdr_put(struct sk_buff *nskb,
+ const struct sk_buff *oldskb,
+ __be16 protocol, int hoplimit)
+{
+ struct ipv6hdr *ip6h;
+ const struct ipv6hdr *oip6h = ipv6_hdr(oldskb);
+#define DEFAULT_TOS_VALUE 0x0U
+ const __u8 tclass = DEFAULT_TOS_VALUE;
skb_put(nskb, sizeof(struct ipv6hdr));
skb_reset_network_header(nskb);
ip6h = ipv6_hdr(nskb);
ip6_flow_hdr(ip6h, tclass, 0);
- ip6h->hop_limit = ip6_dst_hoplimit(dst);
- ip6h->nexthdr = IPPROTO_TCP;
+ ip6h->hop_limit = hoplimit;
+ ip6h->nexthdr = protocol;
ip6h->saddr = oip6h->daddr;
ip6h->daddr = oip6h->saddr;
+ nskb->protocol = htons(ETH_P_IPV6);
+
+ return ip6h;
+}
+EXPORT_SYMBOL_GPL(nf_reject_ip6hdr_put);
+
+void nf_reject_ip6_tcphdr_put(struct sk_buff *nskb,
+ const struct sk_buff *oldskb,
+ const struct tcphdr *oth, unsigned int otcplen)
+{
+ struct tcphdr *tcph;
+ int needs_ack;
+
skb_reset_transport_header(nskb);
tcph = (struct tcphdr *)skb_put(nskb, sizeof(struct tcphdr));
/* Truncate to length (no data) */
tcph->doff = sizeof(struct tcphdr)/4;
- tcph->source = otcph.dest;
- tcph->dest = otcph.source;
+ tcph->source = oth->dest;
+ tcph->dest = oth->source;
- if (otcph.ack) {
+ if (oth->ack) {
needs_ack = 0;
- tcph->seq = otcph.ack_seq;
+ tcph->seq = oth->ack_seq;
tcph->ack_seq = 0;
} else {
needs_ack = 1;
- tcph->ack_seq = htonl(ntohl(otcph.seq) + otcph.syn + otcph.fin
- + otcplen - (otcph.doff<<2));
+ tcph->ack_seq = htonl(ntohl(oth->seq) + oth->syn + oth->fin +
+ otcplen - (oth->doff<<2));
tcph->seq = 0;
}
sizeof(struct tcphdr), IPPROTO_TCP,
csum_partial(tcph,
sizeof(struct tcphdr), 0));
+}
+EXPORT_SYMBOL_GPL(nf_reject_ip6_tcphdr_put);
+
+void nf_send_reset6(struct net *net, struct sk_buff *oldskb, int hook)
+{
+ struct sk_buff *nskb;
+ struct tcphdr _otcph;
+ const struct tcphdr *otcph;
+ unsigned int otcplen, hh_len;
+ const struct ipv6hdr *oip6h = ipv6_hdr(oldskb);
+ struct ipv6hdr *ip6h;
+ struct dst_entry *dst = NULL;
+ struct flowi6 fl6;
+
+ if ((!(ipv6_addr_type(&oip6h->saddr) & IPV6_ADDR_UNICAST)) ||
+ (!(ipv6_addr_type(&oip6h->daddr) & IPV6_ADDR_UNICAST))) {
+ pr_debug("addr is not unicast.\n");
+ return;
+ }
+
+ otcph = nf_reject_ip6_tcphdr_get(oldskb, &_otcph, &otcplen, hook);
+ if (!otcph)
+ return;
+
+ memset(&fl6, 0, sizeof(fl6));
+ fl6.flowi6_proto = IPPROTO_TCP;
+ fl6.saddr = oip6h->daddr;
+ fl6.daddr = oip6h->saddr;
+ fl6.fl6_sport = otcph->dest;
+ fl6.fl6_dport = otcph->source;
+ security_skb_classify_flow(oldskb, flowi6_to_flowi(&fl6));
+ dst = ip6_route_output(net, NULL, &fl6);
+ if (dst == NULL || dst->error) {
+ dst_release(dst);
+ return;
+ }
+ dst = xfrm_lookup(net, dst, flowi6_to_flowi(&fl6), NULL, 0);
+ if (IS_ERR(dst))
+ return;
+
+ hh_len = (dst->dev->hard_header_len + 15)&~15;
+ nskb = alloc_skb(hh_len + 15 + dst->header_len + sizeof(struct ipv6hdr)
+ + sizeof(struct tcphdr) + dst->trailer_len,
+ GFP_ATOMIC);
+
+ if (!nskb) {
+ net_dbg_ratelimited("cannot alloc skb\n");
+ dst_release(dst);
+ return;
+ }
+
+ skb_dst_set(nskb, dst);
+
+ skb_reserve(nskb, hh_len + dst->header_len);
+ ip6h = nf_reject_ip6hdr_put(nskb, oldskb, IPPROTO_TCP,
+ ip6_dst_hoplimit(dst));
+ nf_reject_ip6_tcphdr_put(nskb, oldskb, otcph, otcplen);
nf_ct_attach(nskb, oldskb);
ip6_local_out(nskb);
}
EXPORT_SYMBOL_GPL(nf_send_reset6);
+
+MODULE_LICENSE("GPL");
struct nf_nat_range range;
unsigned int verdict;
+ memset(&range, 0, sizeof(range));
range.flags = priv->flags;
verdict = nf_nat_masquerade_ipv6(pkt->skb, &range, pkt->out);
.eval = nft_masq_ipv6_eval,
.init = nft_masq_init,
.dump = nft_masq_dump,
+ .validate = nft_masq_validate,
};
static struct nft_expr_type nft_masq_ipv6_type __read_mostly = {
* not configured or static. These functions are needed by GSO/GRO implementation.
*/
#include <linux/export.h>
+#include <net/ip.h>
#include <net/ipv6.h>
#include <net/ip6_fib.h>
#include <net/addrconf.h>
#include <net/secure_seq.h>
+/* This function exists only for tap drivers that must support broken
+ * clients requesting UFO without specifying an IPv6 fragment ID.
+ *
+ * This is similar to ipv6_select_ident() but we use an independent hash
+ * seed to limit information leakage.
+ *
+ * The network header must be set before calling this.
+ */
+void ipv6_proxy_select_ident(struct sk_buff *skb)
+{
+ static u32 ip6_proxy_idents_hashrnd __read_mostly;
+ struct in6_addr buf[2];
+ struct in6_addr *addrs;
+ u32 hash, id;
+
+ addrs = skb_header_pointer(skb,
+ skb_network_offset(skb) +
+ offsetof(struct ipv6hdr, saddr),
+ sizeof(buf), buf);
+ if (!addrs)
+ return;
+
+ net_get_random_once(&ip6_proxy_idents_hashrnd,
+ sizeof(ip6_proxy_idents_hashrnd));
+
+ hash = __ipv6_addr_jhash(&addrs[1], ip6_proxy_idents_hashrnd);
+ hash = __ipv6_addr_jhash(&addrs[0], hash);
+
+ id = ip_idents_reserve(hash, 1);
+ skb_shinfo(skb)->ip6_frag_id = htonl(id);
+}
+EXPORT_SYMBOL_GPL(ipv6_proxy_select_ident);
+
int ip6_find_1stfragopt(struct sk_buff *skb, u8 **nexthdr)
{
u16 offset = sizeof(struct ipv6hdr);
struct sit_net *sitn = net_generic(net, sit_net_id);
int err;
- err = ipip6_tunnel_init(dev);
- if (err < 0)
- goto out;
- ipip6_tunnel_clone_6rd(dev, sitn);
+ memcpy(dev->dev_addr, &t->parms.iph.saddr, 4);
+ memcpy(dev->broadcast, &t->parms.iph.daddr, 4);
if ((__force u16)t->parms.i_flags & SIT_ISATAP)
dev->priv_flags |= IFF_ISATAP;
if (err < 0)
goto out;
- strcpy(t->parms.name, dev->name);
+ ipip6_tunnel_clone_6rd(dev, sitn);
+
dev->rtnl_link_ops = &sit_link_ops;
dev_hold(dev);
}
static const struct net_device_ops ipip6_netdev_ops = {
+ .ndo_init = ipip6_tunnel_init,
.ndo_uninit = ipip6_tunnel_uninit,
.ndo_start_xmit = sit_tunnel_xmit,
.ndo_do_ioctl = ipip6_tunnel_ioctl,
tunnel->dev = dev;
tunnel->net = dev_net(dev);
-
- memcpy(dev->dev_addr, &tunnel->parms.iph.saddr, 4);
- memcpy(dev->broadcast, &tunnel->parms.iph.daddr, 4);
+ strcpy(tunnel->parms.name, dev->name);
ipip6_tunnel_bind_dev(dev);
dev->tstats = netdev_alloc_pcpu_stats(struct pcpu_sw_netstats);
tunnel->dev = dev;
tunnel->net = dev_net(dev);
- strcpy(tunnel->parms.name, dev->name);
iph->version = 4;
iph->protocol = IPPROTO_IPV6;
sk->sk_v6_daddr = usin->sin6_addr;
np->flow_label = fl6.flowlabel;
- ip6_set_txhash(sk);
-
/*
* TCP over IPv4
*/
if (err)
goto late_failure;
+ ip6_set_txhash(sk);
+
if (!tp->write_seq && likely(!tp->repair))
tp->write_seq = secure_tcpv6_sequence_number(np->saddr.s6_addr32,
sk->sk_v6_daddr.s6_addr32,
if (th->rst)
return;
- if (!ipv6_unicast_destination(skb))
+ /* If sk not NULL, it means we did a successful lookup and incoming
+ * route had to be correct. prequeue might have dropped our dst.
+ */
+ if (!sk && !ipv6_unicast_destination(skb))
return;
#ifdef CONFIG_TCP_MD5SIG
case IPPROTO_DCCP:
if (!onlyproto && (nh + offset + 4 < skb->data ||
pskb_may_pull(skb, nh + offset + 4 - skb->data))) {
- __be16 *ports = (__be16 *)exthdr;
+ __be16 *ports;
+ nh = skb_network_header(skb);
+ ports = (__be16 *)(nh + offset);
fl6->fl6_sport = ports[!!reverse];
fl6->fl6_dport = ports[!reverse];
}
case IPPROTO_ICMPV6:
if (!onlyproto && pskb_may_pull(skb, nh + offset + 2 - skb->data)) {
- u8 *icmp = (u8 *)exthdr;
+ u8 *icmp;
+ nh = skb_network_header(skb);
+ icmp = (u8 *)(nh + offset);
fl6->fl6_icmp_type = icmp[0];
fl6->fl6_icmp_code = icmp[1];
}
case IPPROTO_MH:
if (!onlyproto && pskb_may_pull(skb, nh + offset + 3 - skb->data)) {
struct ip6_mh *mh;
- mh = (struct ip6_mh *)exthdr;
+ nh = skb_network_header(skb);
+ mh = (struct ip6_mh *)(nh + offset);
fl6->fl6_mh_type = mh->ip6mh_type;
}
fl6->flowi6_proto = nexthdr;
struct ipxhdr *ipx = NULL;
struct sk_buff *skb;
int copied, rc;
+ bool locked = true;
lock_sock(sk);
/* put the autobinding in */
if (sock_flag(sk, SOCK_ZAPPED))
goto out;
+ release_sock(sk);
+ locked = false;
skb = skb_recv_datagram(sk, flags & ~MSG_DONTWAIT,
flags & MSG_DONTWAIT, &rc);
if (!skb) {
out_free:
skb_free_datagram(sk, skb);
out:
- release_sock(sk);
+ if (locked)
+ release_sock(sk);
return rc;
}
if (sk->sk_state != TCP_ESTABLISHED) {
sock->state = SS_UNCONNECTED;
- if (sk->sk_prot->disconnect(sk, flags))
- sock->state = SS_DISCONNECTING;
err = sock_error(sk);
if (!err)
err = -ECONNRESET;
__aligned(__alignof__(struct aead_request));
struct aead_request *aead_req = (void *) aead_req_data;
+ if (data_len == 0)
+ return -EINVAL;
+
memset(aead_req, 0, sizeof(aead_req_data));
sg_init_one(&pt, data, data_len);
rcu_read_lock();
chanctx_conf = rcu_dereference(sdata->vif.chanctx_conf);
if (chanctx_conf) {
- *chandef = chanctx_conf->def;
+ *chandef = sdata->vif.bss_conf.chandef;
ret = 0;
} else if (local->open_count > 0 &&
local->open_count == local->monitors &&
memset(¶ms, 0, sizeof(params));
memset(&csa_ie, 0, sizeof(csa_ie));
- err = ieee80211_parse_ch_switch_ie(sdata, elems, beacon,
+ err = ieee80211_parse_ch_switch_ie(sdata, elems,
ifibss->chandef.chan->band,
sta_flags, ifibss->bssid, &csa_ie);
/* can't switch to destination channel, fail */
* ieee80211_parse_ch_switch_ie - parses channel switch IEs
* @sdata: the sdata of the interface which has received the frame
* @elems: parsed 802.11 elements received with the frame
- * @beacon: indicates if the frame was a beacon or probe response
* @current_band: indicates the current band
* @sta_flags: contains information about own capabilities and restrictions
* to decide which channel switch announcements can be accepted. Only the
* Return: 0 on success, <0 on error and >0 if there is nothing to parse.
*/
int ieee80211_parse_ch_switch_ie(struct ieee80211_sub_if_data *sdata,
- struct ieee802_11_elems *elems, bool beacon,
+ struct ieee802_11_elems *elems,
enum ieee80211_band current_band,
u32 sta_flags, u8 *bssid,
struct ieee80211_csa_ie *csa_ie);
int i, flushed;
struct ps_data *ps;
struct cfg80211_chan_def chandef;
+ bool cancel_scan;
clear_bit(SDATA_STATE_RUNNING, &sdata->state);
- if (rcu_access_pointer(local->scan_sdata) == sdata)
+ cancel_scan = rcu_access_pointer(local->scan_sdata) == sdata;
+ if (cancel_scan)
ieee80211_scan_cancel(local);
/*
list_del(&sdata->u.vlan.list);
mutex_unlock(&local->mtx);
RCU_INIT_POINTER(sdata->vif.chanctx_conf, NULL);
+ /* see comment in the default case below */
+ ieee80211_free_keys(sdata, true);
/* no need to tell driver */
break;
case NL80211_IFTYPE_MONITOR:
/*
* When we get here, the interface is marked down.
* Free the remaining keys, if there are any
- * (shouldn't be, except maybe in WDS mode?)
+ * (which can happen in AP mode if userspace sets
+ * keys before the interface is operating, and maybe
+ * also in WDS mode)
*
* Force the key freeing to always synchronize_net()
* to wait for the RX path in case it is using this
- * interface enqueuing frames * at this very time on
+ * interface enqueuing frames at this very time on
* another CPU.
*/
ieee80211_free_keys(sdata, true);
-
- /* fall through */
- case NL80211_IFTYPE_AP:
skb_queue_purge(&sdata->skb_queue);
}
ieee80211_recalc_ps(local, -1);
+ if (cancel_scan)
+ flush_delayed_work(&local->scan_work);
+
if (local->open_count == 0) {
ieee80211_stop_device(local);
memset(¶ms, 0, sizeof(params));
memset(&csa_ie, 0, sizeof(csa_ie));
- err = ieee80211_parse_ch_switch_ie(sdata, elems, beacon, band,
+ err = ieee80211_parse_ch_switch_ie(sdata, elems, band,
sta_flags, sdata->vif.addr,
&csa_ie);
if (err < 0)
current_band = cbss->channel->band;
memset(&csa_ie, 0, sizeof(csa_ie));
- res = ieee80211_parse_ch_switch_ie(sdata, elems, beacon, current_band,
+ res = ieee80211_parse_ch_switch_ie(sdata, elems, current_band,
ifmgd->flags,
ifmgd->associated->bssid, &csa_ie);
if (res < 0)
ieee80211_queue_work(&local->hw, &ifmgd->chswitch_work);
else
mod_timer(&ifmgd->chswitch_timer,
- TU_TO_EXP_TIME(csa_ie.count * cbss->beacon_interval));
+ TU_TO_EXP_TIME((csa_ie.count - 1) *
+ cbss->beacon_interval));
}
static bool
*/
if (!(rates[0].flags & IEEE80211_TX_RC_MCS)) {
u32 basic_rates = vif->bss_conf.basic_rates;
- s8 baserate = basic_rates ? ffs(basic_rates - 1) : 0;
+ s8 baserate = basic_rates ? ffs(basic_rates) - 1 : 0;
rate = &sband->bitrates[rates[0].idx];
unsigned int i, tp, prob, eprob;
char *p;
- ms = kmalloc(sizeof(*ms) + 4096, GFP_KERNEL);
+ ms = kmalloc(2048, GFP_KERNEL);
if (!ms)
return -ENOMEM;
file->private_data = ms;
p = ms->buf;
- p += sprintf(p, "rate throughput ewma prob this prob "
- "this succ/attempt success attempts\n");
+ p += sprintf(p, "rate tpt eprob *prob"
+ " *ok(*cum) ok( cum)\n");
for (i = 0; i < mi->n_rates; i++) {
struct minstrel_rate *mr = &mi->r[i];
struct minstrel_rate_stats *mrs = &mi->r[i].stats;
prob = MINSTREL_TRUNC(mrs->cur_prob * 1000);
eprob = MINSTREL_TRUNC(mrs->probability * 1000);
- p += sprintf(p, " %6u.%1u %6u.%1u %6u.%1u "
- " %3u(%3u) %8llu %8llu\n",
+ p += sprintf(p, " %4u.%1u %3u.%1u %3u.%1u"
+ " %4u(%4u) %9llu(%9llu)\n",
tp / 10, tp % 10,
eprob / 10, eprob % 10,
prob / 10, prob % 10,
mi->sample_packets);
ms->len = p - ms->buf;
+ WARN_ON(ms->len + sizeof(*ms) > 2048);
+
return 0;
}
cur_thr = mi->groups[cur_group].rates[cur_idx].cur_tp;
cur_prob = mi->groups[cur_group].rates[cur_idx].probability;
- tmp_group = tp_list[j - 1] / MCS_GROUP_RATES;
- tmp_idx = tp_list[j - 1] % MCS_GROUP_RATES;
- tmp_thr = mi->groups[tmp_group].rates[tmp_idx].cur_tp;
- tmp_prob = mi->groups[tmp_group].rates[tmp_idx].probability;
-
- while (j > 0 && (cur_thr > tmp_thr ||
- (cur_thr == tmp_thr && cur_prob > tmp_prob))) {
- j--;
+ do {
tmp_group = tp_list[j - 1] / MCS_GROUP_RATES;
tmp_idx = tp_list[j - 1] % MCS_GROUP_RATES;
tmp_thr = mi->groups[tmp_group].rates[tmp_idx].cur_tp;
tmp_prob = mi->groups[tmp_group].rates[tmp_idx].probability;
- }
+ if (cur_thr < tmp_thr ||
+ (cur_thr == tmp_thr && cur_prob <= tmp_prob))
+ break;
+ j--;
+ } while (j > 0);
if (j < MAX_THR_RATES - 1) {
memmove(&tp_list[j + 1], &tp_list[j], (sizeof(*tp_list) *
prob = MINSTREL_TRUNC(mr->cur_prob * 1000);
eprob = MINSTREL_TRUNC(mr->probability * 1000);
- p += sprintf(p, " %6u.%1u %6u.%1u %6u.%1u "
- "%3u %3u(%3u) %8llu %8llu\n",
+ p += sprintf(p, " %4u.%1u %3u.%1u %3u.%1u "
+ "%3u %4u(%4u) %9llu(%9llu)\n",
tp / 10, tp % 10,
eprob / 10, eprob % 10,
prob / 10, prob % 10,
return ret;
}
- ms = kmalloc(sizeof(*ms) + 8192, GFP_KERNEL);
+ ms = kmalloc(8192, GFP_KERNEL);
if (!ms)
return -ENOMEM;
file->private_data = ms;
p = ms->buf;
- p += sprintf(p, "type rate throughput ewma prob "
- "this prob retry this succ/attempt success attempts\n");
+ p += sprintf(p, "type rate tpt eprob *prob "
+ "ret *ok(*cum) ok( cum)\n");
+
p = minstrel_ht_stats_dump(mi, max_mcs, p);
for (i = 0; i < max_mcs; i++)
MINSTREL_TRUNC(mi->avg_ampdu_len * 10) % 10);
ms->len = p - ms->buf;
+ WARN_ON(ms->len + sizeof(*ms) > 8192);
+
return nonseekable_open(inode, file);
}
sc = le16_to_cpu(hdr->seq_ctrl);
frag = sc & IEEE80211_SCTL_FRAG;
- if (likely((!ieee80211_has_morefrags(fc) && frag == 0) ||
- is_multicast_ether_addr(hdr->addr1))) {
- /* not fragmented */
+ if (likely(!ieee80211_has_morefrags(fc) && frag == 0))
+ goto out;
+
+ if (is_multicast_ether_addr(hdr->addr1)) {
+ rx->local->dot11MulticastReceivedFrameCount++;
goto out;
}
+
I802_DEBUG_INC(rx->local->rx_handlers_fragments);
if (skb_linearize(rx->skb))
out:
if (rx->sta)
rx->sta->rx_packets++;
- if (is_multicast_ether_addr(hdr->addr1))
- rx->local->dot11MulticastReceivedFrameCount++;
- else
- ieee80211_led_rx(rx->local);
+ ieee80211_led_rx(rx->local);
return RX_CONTINUE;
}
#include "wme.h"
int ieee80211_parse_ch_switch_ie(struct ieee80211_sub_if_data *sdata,
- struct ieee802_11_elems *elems, bool beacon,
+ struct ieee802_11_elems *elems,
enum ieee80211_band current_band,
u32 sta_flags, u8 *bssid,
struct ieee80211_csa_ie *csa_ie)
return -EINVAL;
}
- if (!beacon && sec_chan_offs) {
+ if (sec_chan_offs) {
secondary_channel_offset = sec_chan_offs->sec_chan_offs;
- } else if (beacon && ht_oper) {
- secondary_channel_offset =
- ht_oper->ht_param & IEEE80211_HT_PARAM_CHA_SEC_OFFSET;
} else if (!(sta_flags & IEEE80211_STA_DISABLE_HT)) {
- /* If it's not a beacon, HT is enabled and the IE not present,
- * it's 20 MHz, 802.11-2012 8.5.2.6:
- * This element [the Secondary Channel Offset Element] is
- * present when switching to a 40 MHz channel. It may be
- * present when switching to a 20 MHz channel (in which
- * case the secondary channel offset is set to SCN).
- */
+ /* If the secondary channel offset IE is not present,
+ * we can't know what's the post-CSA offset, so the
+ * best we can do is use 20MHz.
+ */
secondary_channel_offset = IEEE80211_HT_PARAM_CHA_SEC_NONE;
}
* @known_smps_mode: the smps_mode the client thinks we are in. Relevant for
* AP only.
* @cipher_scheme: optional cipher scheme for this station
+ * @last_tdls_pkt_time: holds the time in jiffies of last TDLS pkt ACKed
*/
struct sta_info {
/* General information, mostly static */
#
# Makefile for MPLS.
#
-obj-y += mpls_gso.o
+obj-$(CONFIG_NET_MPLS_GSO) += mpls_gso.o
__skb_push(skb, skb->mac_len);
/* Segment inner packet. */
- mpls_features = skb->dev->mpls_features & netif_skb_features(skb);
+ mpls_features = skb->dev->mpls_features & features;
segs = skb_mac_gso_segment(skb, mpls_features);
* above pulled. It will be re-pushed after returning
* skb_mac_gso_segment(), an indirect caller of this function.
*/
- __skb_push(skb, skb->data - skb_mac_header(skb));
-
+ __skb_pull(skb, skb->data - skb_mac_header(skb));
out:
return segs;
}
struct ip_set *set;
struct ip_set_net *inst = ip_set_pernet(net);
- if (index > inst->ip_set_max)
+ if (index >= inst->ip_set_max)
return IPSET_INVALID_ID;
nfnl_lock(NFNL_SUBSYS_IPSET);
if (*op < IP_SET_OP_VERSION) {
/* Check the version at the beginning of operations */
struct ip_set_req_version *req_version = data;
+
+ if (*len < sizeof(struct ip_set_req_version)) {
+ ret = -EINVAL;
+ goto done;
+ }
+
if (req_version->version != IPSET_PROTOCOL) {
ret = -EPROTO;
goto done;
if (unlikely(crosses_local_route_boundary(skb_af, skb, rt_mode,
local))) {
IP_VS_DBG_RL("We are crossing local and non-local addresses"
- " daddr=%pI4\n", &dest->addr.ip);
+ " daddr=%pI4\n", &daddr);
goto err_put;
}
if (unlikely(crosses_local_route_boundary(skb_af, skb, rt_mode,
local))) {
IP_VS_DBG_RL("We are crossing local and non-local addresses"
- " daddr=%pI6\n", &dest->addr.in6);
+ " daddr=%pI6\n", daddr);
goto err_put;
}
new_skb = skb_realloc_headroom(skb, max_headroom);
if (!new_skb)
goto error;
+ if (skb->sk)
+ skb_set_owner_w(new_skb, skb->sk);
consume_skb(skb);
skb = new_skb;
}
{
/* REPLY */
/* sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2 */
-/*syn*/ { sIV, sS2, sIV, sIV, sIV, sIV, sIV, sIV, sIV, sS2 },
+/*syn*/ { sIV, sS2, sIV, sIV, sIV, sIV, sIV, sSS, sIV, sS2 },
/*
* sNO -> sIV Never reached.
* sSS -> sS2 Simultaneous open
* sFW -> sIV
* sCW -> sIV
* sLA -> sIV
- * sTW -> sIV Reopened connection, but server may not do it.
+ * sTW -> sSS Reopened connection, but server may have switched role
* sCL -> sIV
*/
/* sNO, sSS, sSR, sES, sFW, sCW, sLA, sTW, sCL, sS2 */
basechain->stats = stats;
} else {
stats = netdev_alloc_pcpu_stats(struct nft_stats);
- if (IS_ERR(stats)) {
+ if (stats == NULL) {
module_put(type->owner);
kfree(basechain);
- return PTR_ERR(stats);
+ return -ENOMEM;
}
rcu_assign_pointer(basechain->stats, stats);
}
}
}
-/* Schedule objects for release via rcu to make sure no packets are accesing
- * removed rules.
- */
-static void nf_tables_commit_release_rcu(struct rcu_head *rt)
+static void nf_tables_commit_release(struct nft_trans *trans)
{
- struct nft_trans *trans = container_of(rt, struct nft_trans, rcu_head);
-
switch (trans->msg_type) {
case NFT_MSG_DELTABLE:
nf_tables_table_destroy(&trans->ctx);
}
}
+ synchronize_rcu();
+
list_for_each_entry_safe(trans, next, &net->nft.commit_list, list) {
list_del(&trans->list);
- trans->ctx.nla = NULL;
- call_rcu(&trans->rcu_head, nf_tables_commit_release_rcu);
+ nf_tables_commit_release(trans);
}
nf_tables_gen_notify(net, skb, NFT_MSG_NEWGEN);
return 0;
}
-/* Schedule objects for release via rcu to make sure no packets are accesing
- * aborted rules.
- */
-static void nf_tables_abort_release_rcu(struct rcu_head *rt)
+static void nf_tables_abort_release(struct nft_trans *trans)
{
- struct nft_trans *trans = container_of(rt, struct nft_trans, rcu_head);
-
switch (trans->msg_type) {
case NFT_MSG_NEWTABLE:
nf_tables_table_destroy(&trans->ctx);
}
}
+ synchronize_rcu();
+
list_for_each_entry_safe_reverse(trans, next,
&net->nft.commit_list, list) {
list_del(&trans->list);
- trans->ctx.nla = NULL;
- call_rcu(&trans->rcu_head, nf_tables_abort_release_rcu);
+ nf_tables_abort_release(trans);
}
return 0;
.abort = nf_tables_abort,
};
+int nft_chain_validate_dependency(const struct nft_chain *chain,
+ enum nft_chain_type type)
+{
+ const struct nft_base_chain *basechain;
+
+ if (chain->flags & NFT_BASE_CHAIN) {
+ basechain = nft_base_chain(chain);
+ if (basechain->type->type != type)
+ return -EOPNOTSUPP;
+ }
+ return 0;
+}
+EXPORT_SYMBOL_GPL(nft_chain_validate_dependency);
+
/*
* Loop detection - walk through the ruleset beginning at the destination chain
* of a new jump until either the source chain is reached (loop) or all
[NFNLGRP_CONNTRACK_EXP_NEW] = NFNL_SUBSYS_CTNETLINK_EXP,
[NFNLGRP_CONNTRACK_EXP_UPDATE] = NFNL_SUBSYS_CTNETLINK_EXP,
[NFNLGRP_CONNTRACK_EXP_DESTROY] = NFNL_SUBSYS_CTNETLINK_EXP,
+ [NFNLGRP_NFTABLES] = NFNL_SUBSYS_NFTABLES,
+ [NFNLGRP_ACCT_QUOTA] = NFNL_SUBSYS_ACCT,
};
void nfnl_lock(__u8 subsys_id)
static int nfnetlink_bind(int group)
{
const struct nfnetlink_subsystem *ss;
- int type = nfnl_group2type[group];
+ int type;
+
+ if (group <= NFNLGRP_NONE || group > NFNLGRP_MAX)
+ return -EINVAL;
+
+ type = nfnl_group2type[group];
rcu_read_lock();
ss = nfnetlink_get_subsys(type);
{
int i;
+ for (i = NFNLGRP_NONE + 1; i <= NFNLGRP_MAX; i++)
+ BUG_ON(nfnl_group2type[i] == NFNL_SUBSYS_NONE);
+
for (i=0; i<NFNL_SUBSYS_COUNT; i++)
mutex_init(&table[i].mutex);
#define NFULNL_NLBUFSIZ_DEFAULT NLMSG_GOODSIZE
#define NFULNL_TIMEOUT_DEFAULT 100 /* every second */
#define NFULNL_QTHRESH_DEFAULT 100 /* 100 packets */
-#define NFULNL_COPY_RANGE_MAX 0xFFFF /* max packet size is limited by 16-bit struct nfattr nfa_len field */
+/* max packet size is limited by 16-bit struct nfattr nfa_len field */
+#define NFULNL_COPY_RANGE_MAX (0xFFFF - NLA_HDRLEN)
#define PRINTR(x, args...) do { if (net_ratelimit()) \
printk(x, ## args); } while (0);
case NFULNL_COPY_PACKET:
inst->copy_mode = mode;
+ if (range == 0)
+ range = NFULNL_COPY_RANGE_MAX;
inst->copy_range = min_t(unsigned int,
range, NFULNL_COPY_RANGE_MAX);
break;
return skb;
}
-static int
+static void
__nfulnl_send(struct nfulnl_instance *inst)
{
- int status = -1;
-
if (inst->qlen > 1) {
struct nlmsghdr *nlh = nlmsg_put(inst->skb, 0, 0,
NLMSG_DONE,
sizeof(struct nfgenmsg),
0);
- if (!nlh)
+ if (WARN_ONCE(!nlh, "bad nlskb size: %u, tailroom %d\n",
+ inst->skb->len, skb_tailroom(inst->skb))) {
+ kfree_skb(inst->skb);
goto out;
+ }
}
- status = nfnetlink_unicast(inst->skb, inst->net, inst->peer_portid,
- MSG_DONTWAIT);
-
+ nfnetlink_unicast(inst->skb, inst->net, inst->peer_portid,
+ MSG_DONTWAIT);
+out:
inst->qlen = 0;
inst->skb = NULL;
-out:
- return status;
}
static void
+ nla_total_size(sizeof(u_int32_t)) /* gid */
+ nla_total_size(plen) /* prefix */
+ nla_total_size(sizeof(struct nfulnl_msg_packet_hw))
- + nla_total_size(sizeof(struct nfulnl_msg_packet_timestamp));
+ + nla_total_size(sizeof(struct nfulnl_msg_packet_timestamp))
+ + nla_total_size(sizeof(struct nfgenmsg)); /* NLMSG_DONE */
if (in && skb_mac_header_was_set(skb)) {
size += nla_total_size(skb->dev->hard_header_len)
break;
case NFULNL_COPY_PACKET:
- if (inst->copy_range == 0
- || inst->copy_range > skb->len)
+ if (inst->copy_range > skb->len)
data_len = skb->len;
else
data_len = inst->copy_range;
goto unlock_and_release;
}
- if (inst->skb &&
- size > skb_tailroom(inst->skb) - sizeof(struct nfgenmsg)) {
+ if (inst->skb && size > skb_tailroom(inst->skb)) {
/* either the queue len is too high or we don't have
* enough room in the skb left. flush to userspace. */
__nfulnl_flush(inst);
* returned by nf_queue. For instance, callers rely on -ECANCELED to
* mean 'ignore this hook'.
*/
- if (IS_ERR(segs))
+ if (IS_ERR_OR_NULL(segs))
goto out_err;
queued = 0;
err = 0;
#include <linux/netfilter/x_tables.h>
#include <linux/netfilter_ipv4/ip_tables.h>
#include <linux/netfilter_ipv6/ip6_tables.h>
-#include <asm/uaccess.h> /* for set_fs */
#include <net/netfilter/nf_tables.h>
+static int nft_compat_chain_validate_dependency(const char *tablename,
+ const struct nft_chain *chain)
+{
+ const struct nft_base_chain *basechain;
+
+ if (!tablename || !(chain->flags & NFT_BASE_CHAIN))
+ return 0;
+
+ basechain = nft_base_chain(chain);
+ if (strcmp(tablename, "nat") == 0 &&
+ basechain->type->type != NFT_CHAIN_T_NAT)
+ return -EINVAL;
+
+ return 0;
+}
+
union nft_entry {
struct ipt_entry e4;
struct ip6t_entry e6;
struct xt_target *target, void *info,
union nft_entry *entry, u8 proto, bool inv)
{
- par->net = &init_net;
+ par->net = ctx->net;
par->table = ctx->table->name;
switch (ctx->afi->family) {
case AF_INET:
const struct nf_hook_ops *ops = &basechain->ops[0];
par->hook_mask = 1 << ops->hooknum;
+ } else {
+ par->hook_mask = 0;
}
par->family = ctx->afi->family;
}
union nft_entry e = {};
int ret;
+ ret = nft_compat_chain_validate_dependency(target->table, ctx->chain);
+ if (ret < 0)
+ goto err;
+
target_compat_from_user(target, nla_data(tb[NFTA_TARGET_INFO]), info);
if (ctx->nla[NFTA_RULE_COMPAT]) {
{
struct xt_target *target = expr->ops->data;
unsigned int hook_mask = 0;
+ int ret;
if (ctx->chain->flags & NFT_BASE_CHAIN) {
const struct nft_base_chain *basechain =
const struct nf_hook_ops *ops = &basechain->ops[0];
hook_mask = 1 << ops->hooknum;
- if (hook_mask & target->hooks)
- return 0;
+ if (!(hook_mask & target->hooks))
+ return -EINVAL;
- /* This target is being called from an invalid chain */
- return -EINVAL;
+ ret = nft_compat_chain_validate_dependency(target->table,
+ ctx->chain);
+ if (ret < 0)
+ return ret;
}
return 0;
}
struct xt_match *match, void *info,
union nft_entry *entry, u8 proto, bool inv)
{
- par->net = &init_net;
+ par->net = ctx->net;
par->table = ctx->table->name;
switch (ctx->afi->family) {
case AF_INET:
const struct nf_hook_ops *ops = &basechain->ops[0];
par->hook_mask = 1 << ops->hooknum;
+ } else {
+ par->hook_mask = 0;
}
par->family = ctx->afi->family;
}
union nft_entry e = {};
int ret;
+ ret = nft_compat_chain_validate_dependency(match->table, ctx->chain);
+ if (ret < 0)
+ goto err;
+
match_compat_from_user(match, nla_data(tb[NFTA_MATCH_INFO]), info);
if (ctx->nla[NFTA_RULE_COMPAT]) {
{
struct xt_match *match = expr->ops->data;
unsigned int hook_mask = 0;
+ int ret;
if (ctx->chain->flags & NFT_BASE_CHAIN) {
const struct nft_base_chain *basechain =
const struct nf_hook_ops *ops = &basechain->ops[0];
hook_mask = 1 << ops->hooknum;
- if (hook_mask & match->hooks)
- return 0;
+ if (!(hook_mask & match->hooks))
+ return -EINVAL;
- /* This match is being called from an invalid chain */
- return -EINVAL;
+ ret = nft_compat_chain_validate_dependency(match->table,
+ ctx->chain);
+ if (ret < 0)
+ return ret;
}
return 0;
}
family = ctx->afi->family;
/* Re-use the existing target if it's already loaded. */
- list_for_each_entry(nft_target, &nft_match_list, head) {
+ list_for_each_entry(nft_target, &nft_target_list, head) {
struct xt_target *target = nft_target->ops.data;
if (strcmp(target->name, tg_name) == 0 &&
const struct nlattr * const tb[])
{
struct nft_masq *priv = nft_expr_priv(expr);
+ int err;
+
+ err = nft_chain_validate_dependency(ctx->chain, NFT_CHAIN_T_NAT);
+ if (err < 0)
+ return err;
if (tb[NFTA_MASQ_FLAGS] == NULL)
return 0;
}
EXPORT_SYMBOL_GPL(nft_masq_dump);
+int nft_masq_validate(const struct nft_ctx *ctx, const struct nft_expr *expr,
+ const struct nft_data **data)
+{
+ return nft_chain_validate_dependency(ctx->chain, NFT_CHAIN_T_NAT);
+}
+EXPORT_SYMBOL_GPL(nft_masq_validate);
+
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Arturo Borrero Gonzalez <arturo.borrero.glez@gmail.com>");
u32 family;
int err;
- if (tb[NFTA_NAT_TYPE] == NULL)
+ err = nft_chain_validate_dependency(ctx->chain, NFT_CHAIN_T_NAT);
+ if (err < 0)
+ return err;
+
+ if (tb[NFTA_NAT_TYPE] == NULL ||
+ (tb[NFTA_NAT_REG_ADDR_MIN] == NULL &&
+ tb[NFTA_NAT_REG_PROTO_MIN] == NULL))
return -EINVAL;
switch (ntohl(nla_get_be32(tb[NFTA_NAT_TYPE]))) {
priv->family = family;
if (tb[NFTA_NAT_REG_ADDR_MIN]) {
- priv->sreg_addr_min = ntohl(nla_get_be32(
- tb[NFTA_NAT_REG_ADDR_MIN]));
+ priv->sreg_addr_min =
+ ntohl(nla_get_be32(tb[NFTA_NAT_REG_ADDR_MIN]));
+
err = nft_validate_input_register(priv->sreg_addr_min);
if (err < 0)
return err;
- }
- if (tb[NFTA_NAT_REG_ADDR_MAX]) {
- priv->sreg_addr_max = ntohl(nla_get_be32(
- tb[NFTA_NAT_REG_ADDR_MAX]));
- err = nft_validate_input_register(priv->sreg_addr_max);
- if (err < 0)
- return err;
- } else
- priv->sreg_addr_max = priv->sreg_addr_min;
+ if (tb[NFTA_NAT_REG_ADDR_MAX]) {
+ priv->sreg_addr_max =
+ ntohl(nla_get_be32(tb[NFTA_NAT_REG_ADDR_MAX]));
+
+ err = nft_validate_input_register(priv->sreg_addr_max);
+ if (err < 0)
+ return err;
+ } else {
+ priv->sreg_addr_max = priv->sreg_addr_min;
+ }
+ }
if (tb[NFTA_NAT_REG_PROTO_MIN]) {
- priv->sreg_proto_min = ntohl(nla_get_be32(
- tb[NFTA_NAT_REG_PROTO_MIN]));
+ priv->sreg_proto_min =
+ ntohl(nla_get_be32(tb[NFTA_NAT_REG_PROTO_MIN]));
+
err = nft_validate_input_register(priv->sreg_proto_min);
if (err < 0)
return err;
- }
- if (tb[NFTA_NAT_REG_PROTO_MAX]) {
- priv->sreg_proto_max = ntohl(nla_get_be32(
- tb[NFTA_NAT_REG_PROTO_MAX]));
- err = nft_validate_input_register(priv->sreg_proto_max);
- if (err < 0)
- return err;
- } else
- priv->sreg_proto_max = priv->sreg_proto_min;
+ if (tb[NFTA_NAT_REG_PROTO_MAX]) {
+ priv->sreg_proto_max =
+ ntohl(nla_get_be32(tb[NFTA_NAT_REG_PROTO_MAX]));
+
+ err = nft_validate_input_register(priv->sreg_proto_max);
+ if (err < 0)
+ return err;
+ } else {
+ priv->sreg_proto_max = priv->sreg_proto_min;
+ }
+ }
if (tb[NFTA_NAT_FLAGS]) {
priv->flags = ntohl(nla_get_be32(tb[NFTA_NAT_FLAGS]));
if (nla_put_be32(skb, NFTA_NAT_FAMILY, htonl(priv->family)))
goto nla_put_failure;
- if (nla_put_be32(skb,
- NFTA_NAT_REG_ADDR_MIN, htonl(priv->sreg_addr_min)))
- goto nla_put_failure;
- if (nla_put_be32(skb,
- NFTA_NAT_REG_ADDR_MAX, htonl(priv->sreg_addr_max)))
- goto nla_put_failure;
+
+ if (priv->sreg_addr_min) {
+ if (nla_put_be32(skb, NFTA_NAT_REG_ADDR_MIN,
+ htonl(priv->sreg_addr_min)) ||
+ nla_put_be32(skb, NFTA_NAT_REG_ADDR_MAX,
+ htonl(priv->sreg_addr_max)))
+ goto nla_put_failure;
+ }
+
if (priv->sreg_proto_min) {
if (nla_put_be32(skb, NFTA_NAT_REG_PROTO_MIN,
- htonl(priv->sreg_proto_min)))
- goto nla_put_failure;
- if (nla_put_be32(skb, NFTA_NAT_REG_PROTO_MAX,
+ htonl(priv->sreg_proto_min)) ||
+ nla_put_be32(skb, NFTA_NAT_REG_PROTO_MAX,
htonl(priv->sreg_proto_max)))
goto nla_put_failure;
}
return -1;
}
+static int nft_nat_validate(const struct nft_ctx *ctx,
+ const struct nft_expr *expr,
+ const struct nft_data **data)
+{
+ return nft_chain_validate_dependency(ctx->chain, NFT_CHAIN_T_NAT);
+}
+
static struct nft_expr_type nft_nat_type;
static const struct nft_expr_ops nft_nat_ops = {
.type = &nft_nat_type,
.eval = nft_nat_eval,
.init = nft_nat_init,
.dump = nft_nat_dump,
+ .validate = nft_nat_validate,
};
static struct nft_expr_type nft_nat_type __read_mostly = {
static int netlink_dump(struct sock *sk);
static void netlink_skb_destructor(struct sk_buff *skb);
+/* nl_table locking explained:
+ * Lookup and traversal are protected with nl_sk_hash_lock or nl_table_lock
+ * combined with an RCU read-side lock. Insertion and removal are protected
+ * with nl_sk_hash_lock while using RCU list modification primitives and may
+ * run in parallel to nl_table_lock protected lookups. Destruction of the
+ * Netlink socket may only occur *after* nl_table_lock has been acquired
+ * either during or after the socket has been removed from the list.
+ */
DEFINE_RWLOCK(nl_table_lock);
EXPORT_SYMBOL_GPL(nl_table_lock);
static atomic_t nl_table_users = ATOMIC_INIT(0);
static int lockdep_nl_sk_hash_is_held(void)
{
#ifdef CONFIG_LOCKDEP
- return (debug_locks) ? lockdep_is_held(&nl_sk_hash_lock) : 1;
-#else
- return 1;
+ if (debug_locks)
+ return lockdep_is_held(&nl_sk_hash_lock) || lockdep_is_held(&nl_table_lock);
#endif
+ return 1;
}
static ATOMIC_NOTIFIER_HEAD(netlink_chain);
struct netlink_table *table = &nl_table[protocol];
struct sock *sk;
+ read_lock(&nl_table_lock);
rcu_read_lock();
sk = __netlink_lookup(table, portid, net);
if (sk)
sock_hold(sk);
rcu_read_unlock();
+ read_unlock(&nl_table_lock);
return sk;
}
}
netlink_table_ungrab();
- /* Wait for readers to complete */
- synchronize_net();
-
kfree(nlk->groups);
nlk->groups = NULL;
retry:
cond_resched();
+ netlink_table_grab();
rcu_read_lock();
if (__netlink_lookup(table, portid, net)) {
/* Bind collision, search negative portid values. */
if (rover > -4097)
rover = -4097;
rcu_read_unlock();
+ netlink_table_ungrab();
goto retry;
}
rcu_read_unlock();
+ netlink_table_ungrab();
err = netlink_insert(sk, net, portid);
if (err == -EADDRINUSE)
return;
for (undo = 0; undo < group; undo++)
- if (test_bit(group, &groups))
+ if (test_bit(undo, &groups))
nlk->netlink_unbind(undo);
}
netlink_insert(sk, net, nladdr->nl_pid) :
netlink_autobind(sock);
if (err) {
- netlink_unbind(nlk->ngroups - 1, groups, nlk);
+ netlink_unbind(nlk->ngroups, groups, nlk);
return err;
}
}
nl_table[unit].module = module;
if (cfg) {
nl_table[unit].bind = cfg->bind;
+ nl_table[unit].unbind = cfg->unbind;
nl_table[unit].flags = cfg->flags;
if (cfg->compare)
nl_table[unit].compare = cfg->compare;
}
static void *netlink_seq_start(struct seq_file *seq, loff_t *pos)
- __acquires(RCU)
+ __acquires(nl_table_lock) __acquires(RCU)
{
+ read_lock(&nl_table_lock);
rcu_read_lock();
return *pos ? netlink_seq_socket_idx(seq, *pos - 1) : SEQ_START_TOKEN;
}
static void *netlink_seq_next(struct seq_file *seq, void *v, loff_t *pos)
{
+ struct rhashtable *ht;
struct netlink_sock *nlk;
struct nl_seq_iter *iter;
struct net *net;
iter = seq->private;
nlk = v;
- rht_for_each_entry_rcu(nlk, nlk->node.next, node)
+ i = iter->link;
+ ht = &nl_table[i].hash;
+ rht_for_each_entry(nlk, nlk->node.next, ht, node)
if (net_eq(sock_net((struct sock *)nlk), net))
return nlk;
- i = iter->link;
j = iter->hash_idx + 1;
do {
- struct rhashtable *ht = &nl_table[i].hash;
const struct bucket_table *tbl = rht_dereference_rcu(ht->tbl, ht);
for (; j < tbl->size; j++) {
- rht_for_each_entry_rcu(nlk, tbl->buckets[j], node) {
+ rht_for_each_entry(nlk, tbl->buckets[j], ht, node) {
if (net_eq(sock_net((struct sock *)nlk), net)) {
iter->link = i;
iter->hash_idx = j;
}
static void netlink_seq_stop(struct seq_file *seq, void *v)
- __releases(RCU)
+ __releases(RCU) __releases(nl_table_lock)
{
rcu_read_unlock();
+ read_unlock(&nl_table_lock);
}
{
int transport_len = skb->len - skb_transport_offset(skb);
- if (l4_proto == IPPROTO_TCP) {
+ if (l4_proto == NEXTHDR_TCP) {
if (likely(transport_len >= sizeof(struct tcphdr)))
inet_proto_csum_replace16(&tcp_hdr(skb)->check, skb,
addr, new_addr, 1);
- } else if (l4_proto == IPPROTO_UDP) {
+ } else if (l4_proto == NEXTHDR_UDP) {
if (likely(transport_len >= sizeof(struct udphdr))) {
struct udphdr *uh = udp_hdr(skb);
uh->check = CSUM_MANGLED_0;
}
}
+ } else if (l4_proto == NEXTHDR_ICMP) {
+ if (likely(transport_len >= sizeof(struct icmp6hdr)))
+ inet_proto_csum_replace16(&icmp6_hdr(skb)->icmp6_cksum,
+ skb, addr, new_addr, 1);
}
}
case OVS_ACTION_ATTR_SAMPLE:
err = sample(dp, skb, key, a);
- if (unlikely(err)) /* skb already freed. */
- return err;
break;
}
segs = __skb_gso_segment(skb, NETIF_F_SG, false);
if (IS_ERR(segs))
return PTR_ERR(segs);
+ if (segs == NULL)
+ return -EINVAL;
/* Queue all of the segments. */
skb = segs;
return msgsize;
}
-/* Called with ovs_mutex or RCU read lock. */
+/* Called with ovs_mutex. */
static int ovs_dp_cmd_fill_info(struct datapath *dp, struct sk_buff *skb,
u32 portid, u32 seq, u32 flags, u8 cmd)
{
if (!reply)
return -ENOMEM;
- rcu_read_lock();
+ ovs_lock();
dp = lookup_datapath(sock_net(skb->sk), info->userhdr, info->attrs);
if (IS_ERR(dp)) {
err = PTR_ERR(dp);
err = ovs_dp_cmd_fill_info(dp, reply, info->snd_portid,
info->snd_seq, 0, OVS_DP_CMD_NEW);
BUG_ON(err < 0);
- rcu_read_unlock();
+ ovs_unlock();
return genlmsg_reply(reply, info);
err_unlock_free:
- rcu_read_unlock();
+ ovs_unlock();
kfree_skb(reply);
return err;
}
int skip = cb->args[0];
int i = 0;
- rcu_read_lock();
- list_for_each_entry_rcu(dp, &ovs_net->dps, list_node) {
+ ovs_lock();
+ list_for_each_entry(dp, &ovs_net->dps, list_node) {
if (i >= skip &&
ovs_dp_cmd_fill_info(dp, skb, NETLINK_CB(cb->skb).portid,
cb->nlh->nlmsg_seq, NLM_F_MULTI,
break;
i++;
}
- rcu_read_unlock();
+ ovs_unlock();
cb->args[0] = i;
if (match->key->eth.type == htons(ETH_P_ARP)
|| match->key->eth.type == htons(ETH_P_RARP)) {
key_expected |= 1 << OVS_KEY_ATTR_ARP;
- if (match->mask && (match->mask->key.eth.type == htons(0xffff)))
+ if (match->mask && (match->mask->key.tp.src == htons(0xff)))
mask_allowed |= 1 << OVS_KEY_ATTR_ARP;
}
ipv6_key->ipv6_frag, OVS_FRAG_TYPE_MAX);
return -EINVAL;
}
+
+ if (!is_mask && ipv6_key->ipv6_label & htonl(0xFFF00000)) {
+ OVS_NLERR("IPv6 flow label %x is out of range (max=%x).\n",
+ ntohl(ipv6_key->ipv6_label), (1 << 20) - 1);
+ return -EINVAL;
+ }
+
SW_FLOW_KEY_PUT(match, ipv6.label,
ipv6_key->ipv6_label, is_mask);
SW_FLOW_KEY_PUT(match, ip.proto,
__unregister_prot_hook(sk, sync);
}
-static inline __pure struct page *pgv_to_page(void *addr)
+static inline struct page * __pure pgv_to_page(void *addr)
{
if (is_vmalloc_addr(addr))
return vmalloc_to_page(addr);
if (!ops->init || (err = ops->init(sch, tca[TCA_OPTIONS])) == 0) {
if (qdisc_is_percpu_stats(sch)) {
sch->cpu_bstats =
- alloc_percpu(struct gnet_stats_basic_cpu);
+ netdev_alloc_pcpu_stats(struct gnet_stats_basic_cpu);
if (!sch->cpu_bstats)
goto err_out4;
sch->limit = q->params.limit;
setup_timer(&q->adapt_timer, pie_timer, (unsigned long)sch);
- mod_timer(&q->adapt_timer, jiffies + HZ / 2);
if (opt) {
int err = pie_change(sch, opt);
return err;
}
+ mod_timer(&q->adapt_timer, jiffies + HZ / 2);
return 0;
}
list_add(&cur_key->key_list, sh_keys);
cur_key->key = key;
- sctp_auth_key_hold(key);
-
return 0;
nomem:
if (!replace)
addr_param = param.v + sizeof(sctp_addip_param_t);
af = sctp_get_af_specific(param_type2af(param.p->type));
+ if (af == NULL)
+ break;
+
af->from_addr_param(&addr, addr_param,
htons(asoc->peer.port), 0);
char *string = NULL;
struct gss_cred *gss_cred = container_of(cred, struct gss_cred, gc_base);
struct gss_cl_ctx *ctx;
+ unsigned int len;
struct xdr_netobj *acceptor;
rcu_read_lock();
if (!ctx)
goto out;
- acceptor = &ctx->gc_acceptor;
+ len = ctx->gc_acceptor.len;
+ rcu_read_unlock();
/* no point if there's no string */
- if (!acceptor->len)
- goto out;
-
- string = kmalloc(acceptor->len + 1, GFP_KERNEL);
+ if (!len)
+ return NULL;
+realloc:
+ string = kmalloc(len + 1, GFP_KERNEL);
if (!string)
+ return NULL;
+
+ rcu_read_lock();
+ ctx = rcu_dereference(gss_cred->gc_ctx);
+
+ /* did the ctx disappear or was it replaced by one with no acceptor? */
+ if (!ctx || !ctx->gc_acceptor.len) {
+ kfree(string);
+ string = NULL;
goto out;
+ }
+
+ acceptor = &ctx->gc_acceptor;
+
+ /*
+ * Did we find a new acceptor that's longer than the original? Allocate
+ * a longer buffer and try again.
+ */
+ if (len < acceptor->len) {
+ len = acceptor->len;
+ rcu_read_unlock();
+ kfree(string);
+ goto realloc;
+ }
memcpy(string, acceptor->data, acceptor->len);
string[acceptor->len] = '\0';
xid = *p++;
calldir = *p;
- if (bc_xprt)
- req = xprt_lookup_rqst(bc_xprt, xid);
-
- if (!req) {
- printk(KERN_NOTICE
- "%s: Got unrecognized reply: "
- "calldir 0x%x xpt_bc_xprt %p xid %08x\n",
- __func__, ntohl(calldir),
- bc_xprt, ntohl(xid));
+ if (!bc_xprt)
return -EAGAIN;
- }
+ spin_lock_bh(&bc_xprt->transport_lock);
+ req = xprt_lookup_rqst(bc_xprt, xid);
+ if (!req)
+ goto unlock_notfound;
memcpy(&req->rq_private_buf, &req->rq_rcv_buf, sizeof(struct xdr_buf));
/*
dst = &req->rq_private_buf.head[0];
src = &rqstp->rq_arg.head[0];
if (dst->iov_len < src->iov_len)
- return -EAGAIN; /* whatever; just giving up. */
+ goto unlock_eagain; /* whatever; just giving up. */
memcpy(dst->iov_base, src->iov_base, src->iov_len);
xprt_complete_rqst(req->rq_task, rqstp->rq_arg.len);
rqstp->rq_arg.len = 0;
+ spin_unlock_bh(&bc_xprt->transport_lock);
return 0;
+unlock_notfound:
+ printk(KERN_NOTICE
+ "%s: Got unrecognized reply: "
+ "calldir 0x%x xpt_bc_xprt %p xid %08x\n",
+ __func__, ntohl(calldir),
+ bc_xprt, ntohl(xid));
+unlock_eagain:
+ spin_unlock_bh(&bc_xprt->transport_lock);
+ return -EAGAIN;
}
static int copy_pages_to_kvecs(struct kvec *vec, struct page **pages, int len)
void tipc_node_link_up(struct tipc_node *n_ptr, struct tipc_link *l_ptr)
{
struct tipc_link **active = &n_ptr->active_links[0];
- u32 addr = n_ptr->addr;
n_ptr->working_links++;
- tipc_nametbl_publish(TIPC_LINK_STATE, addr, addr, TIPC_NODE_SCOPE,
- l_ptr->bearer_id, addr);
+ n_ptr->action_flags |= TIPC_NOTIFY_LINK_UP;
+ n_ptr->link_id = l_ptr->peer_bearer_id << 16 | l_ptr->bearer_id;
+
pr_info("Established link <%s> on network plane %c\n",
l_ptr->name, l_ptr->net_plane);
void tipc_node_link_down(struct tipc_node *n_ptr, struct tipc_link *l_ptr)
{
struct tipc_link **active;
- u32 addr = n_ptr->addr;
n_ptr->working_links--;
- tipc_nametbl_withdraw(TIPC_LINK_STATE, addr, l_ptr->bearer_id, addr);
+ n_ptr->action_flags |= TIPC_NOTIFY_LINK_DOWN;
+ n_ptr->link_id = l_ptr->peer_bearer_id << 16 | l_ptr->bearer_id;
if (!tipc_link_is_active(l_ptr)) {
pr_info("Lost standby link <%s> on network plane %c\n",
LIST_HEAD(conn_sks);
struct sk_buff_head waiting_sks;
u32 addr = 0;
- unsigned int flags = node->action_flags;
+ int flags = node->action_flags;
+ u32 link_id = 0;
- if (likely(!node->action_flags)) {
+ if (likely(!flags)) {
spin_unlock_bh(&node->lock);
return;
}
+ addr = node->addr;
+ link_id = node->link_id;
__skb_queue_head_init(&waiting_sks);
- if (node->action_flags & TIPC_WAKEUP_USERS) {
+
+ if (flags & TIPC_WAKEUP_USERS)
skb_queue_splice_init(&node->waiting_sks, &waiting_sks);
- node->action_flags &= ~TIPC_WAKEUP_USERS;
- }
- if (node->action_flags & TIPC_NOTIFY_NODE_DOWN) {
+
+ if (flags & TIPC_NOTIFY_NODE_DOWN) {
list_replace_init(&node->nsub, &nsub_list);
list_replace_init(&node->conn_sks, &conn_sks);
- node->action_flags &= ~TIPC_NOTIFY_NODE_DOWN;
}
- if (node->action_flags & TIPC_NOTIFY_NODE_UP) {
- node->action_flags &= ~TIPC_NOTIFY_NODE_UP;
- addr = node->addr;
- }
- node->action_flags &= ~TIPC_WAKEUP_BCAST_USERS;
+ node->action_flags &= ~(TIPC_WAKEUP_USERS | TIPC_NOTIFY_NODE_DOWN |
+ TIPC_NOTIFY_NODE_UP | TIPC_NOTIFY_LINK_UP |
+ TIPC_NOTIFY_LINK_DOWN |
+ TIPC_WAKEUP_BCAST_USERS);
+
spin_unlock_bh(&node->lock);
while (!skb_queue_empty(&waiting_sks))
if (flags & TIPC_WAKEUP_BCAST_USERS)
tipc_bclink_wakeup_users();
- if (addr)
+ if (flags & TIPC_NOTIFY_NODE_UP)
tipc_named_node_up(addr);
+
+ if (flags & TIPC_NOTIFY_LINK_UP)
+ tipc_nametbl_publish(TIPC_LINK_STATE, addr, addr,
+ TIPC_NODE_SCOPE, link_id, addr);
+
+ if (flags & TIPC_NOTIFY_LINK_DOWN)
+ tipc_nametbl_withdraw(TIPC_LINK_STATE, addr,
+ link_id, addr);
}
* TIPC_WAIT_OWN_LINKS_DOWN: wait until peer node is declared down
* TIPC_NOTIFY_NODE_DOWN: notify node is down
* TIPC_NOTIFY_NODE_UP: notify node is up
+ * TIPC_DISTRIBUTE_NAME: publish or withdraw link state name type
*/
enum {
TIPC_WAIT_PEER_LINKS_DOWN = (1 << 1),
TIPC_NOTIFY_NODE_DOWN = (1 << 3),
TIPC_NOTIFY_NODE_UP = (1 << 4),
TIPC_WAKEUP_USERS = (1 << 5),
- TIPC_WAKEUP_BCAST_USERS = (1 << 6)
+ TIPC_WAKEUP_BCAST_USERS = (1 << 6),
+ TIPC_NOTIFY_LINK_UP = (1 << 7),
+ TIPC_NOTIFY_LINK_DOWN = (1 << 8)
};
/**
* @working_links: number of working links to node (both active and standby)
* @link_cnt: number of links to node
* @signature: node instance identifier
+ * @link_id: local and remote bearer ids of changing link, if any
* @nsub: list of "node down" subscriptions monitoring node
* @rcu: rcu struct for tipc_node
*/
int link_cnt;
int working_links;
u32 signature;
+ u32 link_id;
struct list_head nsub;
struct sk_buff_head waiting_sks;
struct list_head conn_sks;
sk = &tsk->sk;
/* Queue message */
- bh_lock_sock(sk);
+ spin_lock_bh(&sk->sk_lock.slock);
if (!sock_owned_by_user(sk)) {
rc = filter_rcv(sk, buf);
if (sk_add_backlog(sk, buf, limit))
rc = -TIPC_ERR_OVERLOAD;
}
- bh_unlock_sock(sk);
+ spin_unlock_bh(&sk->sk_lock.slock);
tipc_sk_put(tsk);
if (likely(!rc))
return 0;
case SIOCGETLINKNAME:
if (copy_from_user(&lnr, argp, sizeof(lnr)))
return -EFAULT;
- if (!tipc_node_get_linkname(lnr.bearer_id, lnr.peer,
+ if (!tipc_node_get_linkname(lnr.bearer_id & 0xffff, lnr.peer,
lnr.linkname, TIPC_MAX_LINK_NAME)) {
if (copy_to_user(argp, &lnr, sizeof(lnr)))
return -EFAULT;
int err;
bool need_new_beacon = false;
int len, i;
+ u32 cs_count;
if (!rdev->ops->channel_switch ||
!(rdev->wiphy.flags & WIPHY_FLAG_HAS_CHANNEL_SWITCH))
if (need_new_beacon && !info->attrs[NL80211_ATTR_CSA_IES])
return -EINVAL;
- params.count = nla_get_u32(info->attrs[NL80211_ATTR_CH_SWITCH_COUNT]);
+ /* Even though the attribute is u32, the specification says
+ * u8, so let's make sure we don't overflow.
+ */
+ cs_count = nla_get_u32(info->attrs[NL80211_ATTR_CH_SWITCH_COUNT]);
+ if (cs_count > 255)
+ return -EINVAL;
+
+ params.count = cs_count;
if (!need_new_beacon)
goto skip_beacons;
kfree_skb(skb);
if (IS_ERR(segs))
return PTR_ERR(segs);
+ if (segs == NULL)
+ return -EINVAL;
do {
struct sk_buff *nskb = segs->next;
struct xfrm_policy *pol = xdst->pols[0];
struct xfrm_policy_queue *pq = &pol->polq;
- if (unlikely(skb_fclone_busy(skb))) {
+ if (unlikely(skb_fclone_busy(sk, skb))) {
kfree_skb(skb);
return 0;
}
.errstr = "R0 !read_ok",
.result = REJECT,
},
+ {
+ "program doesn't init R0 before exit in all branches",
+ .insns = {
+ BPF_JMP_IMM(BPF_JGE, BPF_REG_1, 0, 2),
+ BPF_MOV64_IMM(BPF_REG_0, 1),
+ BPF_ALU64_IMM(BPF_ADD, BPF_REG_0, 2),
+ BPF_EXIT_INSN(),
+ },
+ .errstr = "R0 !read_ok",
+ .result = REJECT,
+ },
{
"stack out of bounds",
.insns = {
# $(Q)$(MAKE) $(modbuiltin)=dir
modbuiltin := -f $(srctree)/scripts/Makefile.modbuiltin obj
+###
+# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.dtbinst obj=
+# Usage:
+# $(Q)$(MAKE) $(dtbinst)=dir
+dtbinst := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.dtbinst obj
+
# Prefix -I with $(srctree) if it is not an absolute path.
# skip if -I has no parameter
addtree = $(if $(patsubst -I%,%,$(1)), \
--- /dev/null
+# ==========================================================================
+# Installing dtb files
+#
+# Installs all dtb files listed in $(dtb-y) either in the
+# INSTALL_DTBS_PATH directory or the default location:
+#
+# $INSTALL_PATH/dtbs/$KERNELRELEASE
+#
+# Traverse through subdirectories listed in $(dts-dirs).
+# ==========================================================================
+
+src := $(obj)
+
+PHONY := __dtbs_install
+__dtbs_install:
+
+export dtbinst-root ?= $(obj)
+
+include include/config/auto.conf
+include scripts/Kbuild.include
+include $(srctree)/$(obj)/Makefile
+
+PHONY += __dtbs_install_prep
+__dtbs_install_prep:
+ifeq ("$(dtbinst-root)", "$(obj)")
+ $(Q)if [ -d $(INSTALL_DTBS_PATH).old ]; then rm -rf $(INSTALL_DTBS_PATH).old; fi
+ $(Q)if [ -d $(INSTALL_DTBS_PATH) ]; then mv $(INSTALL_DTBS_PATH) $(INSTALL_DTBS_PATH).old; fi
+ $(Q)mkdir -p $(INSTALL_DTBS_PATH)
+endif
+
+dtbinst-files := $(dtb-y)
+dtbinst-dirs := $(dts-dirs)
+
+# Helper targets for Installing DTBs into the boot directory
+quiet_cmd_dtb_install = INSTALL $<
+ cmd_dtb_install = mkdir -p $(2); cp $< $(2)
+
+install-dir = $(patsubst $(dtbinst-root)%,$(INSTALL_DTBS_PATH)%,$(obj))
+
+$(dtbinst-files) $(dtbinst-dirs): | __dtbs_install_prep
+
+$(dtbinst-files): %.dtb: $(obj)/%.dtb
+ $(call cmd,dtb_install,$(install-dir))
+
+$(dtbinst-dirs):
+ $(Q)$(MAKE) $(dtbinst)=$(obj)/$@
+
+PHONY += $(dtbinst-files) $(dtbinst-dirs)
+__dtbs_install: $(dtbinst-files) $(dtbinst-dirs)
+
+.PHONY: $(PHONY)
dtc-tmp = $(subst $(comma),_,$(dot-target).dts.tmp)
-# Helper targets for Installing DTBs into the boot directory
-quiet_cmd_dtb_install = INSTALL $<
- cmd_dtb_install = cp $< $(2)
-
-_dtbinst_pre_:
- $(Q)if [ -d $(INSTALL_DTBS_PATH).old ]; then rm -rf $(INSTALL_DTBS_PATH).old; fi
- $(Q)if [ -d $(INSTALL_DTBS_PATH) ]; then mv $(INSTALL_DTBS_PATH) $(INSTALL_DTBS_PATH).old; fi
- $(Q)mkdir -p $(INSTALL_DTBS_PATH)
-
-%.dtb_dtbinst_: $(obj)/%.dtb _dtbinst_pre_
- $(call cmd,dtb_install,$(INSTALL_DTBS_PATH))
-
# Bzip2
# ---------------------------------------------------------------------------
{
const struct evm_ima_xattr_data *xattr_data = xattr_value;
- if ((strcmp(xattr_name, XATTR_NAME_EVM) == 0)
- && (xattr_data->type == EVM_XATTR_HMAC))
- return -EPERM;
+ if (strcmp(xattr_name, XATTR_NAME_EVM) == 0) {
+ if (!xattr_value_len)
+ return -EINVAL;
+ if (xattr_data->type != EVM_IMA_XATTR_DIGSIG)
+ return -EPERM;
+ }
return evm_protect_xattr(dentry, xattr_name, xattr_value,
xattr_value_len);
}
result = ima_protect_xattr(dentry, xattr_name, xattr_value,
xattr_value_len);
if (result == 1) {
+ if (!xattr_value_len || (xvalue->type >= IMA_XATTR_LAST))
+ return -EINVAL;
ima_reset_appraise_flags(dentry->d_inode,
(xvalue->type == EVM_IMA_XATTR_DIGSIG) ? 1 : 0);
result = 0;
EVM_XATTR_HMAC,
EVM_IMA_XATTR_DIGSIG,
IMA_XATTR_DIGEST_NG,
+ IMA_XATTR_LAST
};
struct evm_ima_xattr_data {
#define KEYRING_SEARCH_NO_UPDATE_TIME 0x0004 /* Don't update times */
#define KEYRING_SEARCH_NO_CHECK_PERM 0x0008 /* Don't check permissions */
#define KEYRING_SEARCH_DETECT_TOO_DEEP 0x0010 /* Give an error on excessive depth */
+#define KEYRING_SEARCH_SKIP_EXPIRED 0x0020 /* Ignore expired keys (intention to replace) */
int (*iterator)(const void *object, void *iterator_data);
#include <asm/uaccess.h>
#include "internal.h"
+#define KEY_MAX_DESC_SIZE 4096
+
static int key_get_type_from_user(char *type,
const char __user *_type,
unsigned len)
description = NULL;
if (_description) {
- description = strndup_user(_description, PAGE_SIZE);
+ description = strndup_user(_description, KEY_MAX_DESC_SIZE);
if (IS_ERR(description)) {
ret = PTR_ERR(description);
goto error;
goto error;
/* pull the description into kernel space */
- description = strndup_user(_description, PAGE_SIZE);
+ description = strndup_user(_description, KEY_MAX_DESC_SIZE);
if (IS_ERR(description)) {
ret = PTR_ERR(description);
goto error;
/* fetch the name from userspace */
name = NULL;
if (_name) {
- name = strndup_user(_name, PAGE_SIZE);
+ name = strndup_user(_name, KEY_MAX_DESC_SIZE);
if (IS_ERR(name)) {
ret = PTR_ERR(name);
goto error;
{
struct key *key, *instkey;
key_ref_t key_ref;
- char *tmpbuf;
+ char *infobuf;
long ret;
+ int desclen, infolen;
key_ref = lookup_user_key(keyid, KEY_LOOKUP_PARTIAL, KEY_NEED_VIEW);
if (IS_ERR(key_ref)) {
}
okay:
- /* calculate how much description we're going to return */
- ret = -ENOMEM;
- tmpbuf = kmalloc(PAGE_SIZE, GFP_KERNEL);
- if (!tmpbuf)
- goto error2;
-
key = key_ref_to_ptr(key_ref);
+ desclen = strlen(key->description);
- ret = snprintf(tmpbuf, PAGE_SIZE - 1,
- "%s;%d;%d;%08x;%s",
- key->type->name,
- from_kuid_munged(current_user_ns(), key->uid),
- from_kgid_munged(current_user_ns(), key->gid),
- key->perm,
- key->description ?: "");
-
- /* include a NUL char at the end of the data */
- if (ret > PAGE_SIZE - 1)
- ret = PAGE_SIZE - 1;
- tmpbuf[ret] = 0;
- ret++;
+ /* calculate how much information we're going to return */
+ ret = -ENOMEM;
+ infobuf = kasprintf(GFP_KERNEL,
+ "%s;%d;%d;%08x;",
+ key->type->name,
+ from_kuid_munged(current_user_ns(), key->uid),
+ from_kgid_munged(current_user_ns(), key->gid),
+ key->perm);
+ if (!infobuf)
+ goto error2;
+ infolen = strlen(infobuf);
+ ret = infolen + desclen + 1;
/* consider returning the data */
- if (buffer && buflen > 0) {
- if (buflen > ret)
- buflen = ret;
-
- if (copy_to_user(buffer, tmpbuf, buflen) != 0)
+ if (buffer && buflen >= ret) {
+ if (copy_to_user(buffer, infobuf, infolen) != 0 ||
+ copy_to_user(buffer + infolen, key->description,
+ desclen + 1) != 0)
ret = -EFAULT;
}
- kfree(tmpbuf);
+ kfree(infobuf);
error2:
key_ref_put(key_ref);
error:
if (ret < 0)
goto error;
- description = strndup_user(_description, PAGE_SIZE);
+ description = strndup_user(_description, KEY_MAX_DESC_SIZE);
if (IS_ERR(description)) {
ret = PTR_ERR(description);
goto error;
}
if (key->expiry && ctx->now.tv_sec >= key->expiry) {
- ctx->result = ERR_PTR(-EKEYEXPIRED);
+ if (!(ctx->flags & KEYRING_SEARCH_SKIP_EXPIRED))
+ ctx->result = ERR_PTR(-EKEYEXPIRED);
kleave(" = %d [expire]", ctx->skipped_ret);
goto skipped;
}
ctx->index_key.type->name,
ctx->index_key.description);
+#define STATE_CHECKS (KEYRING_SEARCH_NO_STATE_CHECK | KEYRING_SEARCH_DO_STATE_CHECK)
+ BUG_ON((ctx->flags & STATE_CHECKS) == 0 ||
+ (ctx->flags & STATE_CHECKS) == STATE_CHECKS);
+
if (ctx->index_key.description)
ctx->index_key.desc_len = strlen(ctx->index_key.description);
if (ctx->match_data.lookup_type == KEYRING_SEARCH_LOOKUP_ITERATE ||
keyring_compare_object(keyring, &ctx->index_key)) {
ctx->skipped_ret = 2;
- ctx->flags |= KEYRING_SEARCH_DO_STATE_CHECK;
switch (ctx->iterator(keyring_key_to_ptr(keyring), ctx)) {
case 1:
goto found;
}
ctx->skipped_ret = 0;
- if (ctx->flags & KEYRING_SEARCH_NO_STATE_CHECK)
- ctx->flags &= ~KEYRING_SEARCH_DO_STATE_CHECK;
/* Start processing a new keyring */
descend_to_keyring:
.match_data.cmp = key_default_cmp,
.match_data.raw_data = description,
.match_data.lookup_type = KEYRING_SEARCH_LOOKUP_DIRECT,
+ .flags = (KEYRING_SEARCH_DO_STATE_CHECK |
+ KEYRING_SEARCH_SKIP_EXPIRED),
};
struct key *key;
key_ref_t key_ref;
.match_data.cmp = key_default_cmp,
.match_data.raw_data = description,
.match_data.lookup_type = KEYRING_SEARCH_LOOKUP_DIRECT,
+ .flags = KEYRING_SEARCH_DO_STATE_CHECK,
};
struct key *authkey;
key_ref_t authkey_ref;
err = selinux_nlmsg_lookup(sksec->sclass, nlh->nlmsg_type, &perm);
if (err) {
if (err == -EINVAL) {
- WARN_ONCE(1, "selinux_nlmsg_perm: unrecognized netlink message:"
- " protocol=%hu nlmsg_type=%hu sclass=%hu\n",
- sk->sk_protocol, nlh->nlmsg_type, sksec->sclass);
+ printk(KERN_WARNING
+ "SELinux: unrecognized netlink message:"
+ " protocol=%hu nlmsg_type=%hu sclass=%hu\n",
+ sk->sk_protocol, nlh->nlmsg_type, sksec->sclass);
if (!selinux_enforcing || security_get_allow_unknown())
err = 0;
}
FORMAT(DSD_U8),
FORMAT(DSD_U16_LE),
FORMAT(DSD_U32_LE),
+ FORMAT(DSD_U16_BE),
+ FORMAT(DSD_U32_BE),
};
const char *snd_pcm_format_name(snd_pcm_format_t format)
if (err < 0)
return err;
+ if (clear_user(src, sizeof(*src)))
+ return -EFAULT;
if (put_user(status.state, &src->state) ||
compat_put_timespec(&status.trigger_tstamp, &src->trigger_tstamp) ||
compat_put_timespec(&status.tstamp, &src->tstamp) ||
.width = 32, .phys = 32, .le = 1, .signd = 0,
.silence = { 0x69, 0x69, 0x69, 0x69 },
},
+ [SNDRV_PCM_FORMAT_DSD_U16_BE] = {
+ .width = 16, .phys = 16, .le = 0, .signd = 0,
+ .silence = { 0x69, 0x69 },
+ },
+ [SNDRV_PCM_FORMAT_DSD_U32_BE] = {
+ .width = 32, .phys = 32, .le = 0, .signd = 0,
+ .silence = { 0x69, 0x69, 0x69, 0x69 },
+ },
/* FIXME: the following three formats are not defined properly yet */
[SNDRV_PCM_FORMAT_MPEG] = {
.le = -1, .signd = -1,
{
struct snd_pcm_substream *s = NULL;
struct snd_pcm_substream *s1;
- int res = 0;
+ int res = 0, depth = 1;
snd_pcm_group_for_each_entry(s, substream) {
if (do_lock && s != substream) {
if (s->pcm->nonatomic)
- mutex_lock_nested(&s->self_group.mutex,
- SINGLE_DEPTH_NESTING);
+ mutex_lock_nested(&s->self_group.mutex, depth);
else
- spin_lock_nested(&s->self_group.lock,
- SINGLE_DEPTH_NESTING);
+ spin_lock_nested(&s->self_group.lock, depth);
+ depth++;
}
res = ops->pre_action(s, state);
if (res < 0)
down_read(&snd_pcm_link_rwsem);
if (snd_pcm_stream_linked(substream)) {
mutex_lock(&substream->group->mutex);
- mutex_lock_nested(&substream->self_group.mutex,
- SINGLE_DEPTH_NESTING);
+ mutex_lock(&substream->self_group.mutex);
res = snd_pcm_action_group(ops, substream, state, 1);
mutex_unlock(&substream->self_group.mutex);
mutex_unlock(&substream->group->mutex);
#ifndef ARCH_HAS_DMA_MMAP_COHERENT
/* This should be defined / handled globally! */
-#ifdef CONFIG_ARM
+#if defined(CONFIG_ARM) || defined(CONFIG_ARM64)
#define ARCH_HAS_DMA_MMAP_COHERENT
#endif
#endif
#define SAFFIRE_CLOCK_SOURCE_INTERNAL 0
#define SAFFIRE_CLOCK_SOURCE_SPDIF 1
-/* '1' is absent, why... */
+/* clock sources as returned from register of Saffire Pro 10 and 26 */
#define SAFFIREPRO_CLOCK_SOURCE_INTERNAL 0
+#define SAFFIREPRO_CLOCK_SOURCE_SKIP 1 /* never used on hardware */
#define SAFFIREPRO_CLOCK_SOURCE_SPDIF 2
-#define SAFFIREPRO_CLOCK_SOURCE_ADAT1 3
-#define SAFFIREPRO_CLOCK_SOURCE_ADAT2 4
+#define SAFFIREPRO_CLOCK_SOURCE_ADAT1 3 /* not used on s.pro. 10 */
+#define SAFFIREPRO_CLOCK_SOURCE_ADAT2 4 /* not used on s.pro. 10 */
#define SAFFIREPRO_CLOCK_SOURCE_WORDCLOCK 5
+#define SAFFIREPRO_CLOCK_SOURCE_COUNT 6
/* S/PDIF, ADAT1, ADAT2 is enabled or not. three quadlets */
#define SAFFIREPRO_ENABLE_DIG_IFACES 0x01a4
&data, sizeof(__be32), 0);
}
+static char *const saffirepro_10_clk_src_labels[] = {
+ SND_BEBOB_CLOCK_INTERNAL, "S/PDIF", "Word Clock"
+};
static char *const saffirepro_26_clk_src_labels[] = {
SND_BEBOB_CLOCK_INTERNAL, "S/PDIF", "ADAT1", "ADAT2", "Word Clock"
};
-
-static char *const saffirepro_10_clk_src_labels[] = {
- SND_BEBOB_CLOCK_INTERNAL, "S/PDIF", "Word Clock"
+/* Value maps between registers and labels for SaffirePro 10/26. */
+static const signed char saffirepro_clk_maps[][SAFFIREPRO_CLOCK_SOURCE_COUNT] = {
+ /* SaffirePro 10 */
+ [0] = {
+ [SAFFIREPRO_CLOCK_SOURCE_INTERNAL] = 0,
+ [SAFFIREPRO_CLOCK_SOURCE_SKIP] = -1, /* not supported */
+ [SAFFIREPRO_CLOCK_SOURCE_SPDIF] = 1,
+ [SAFFIREPRO_CLOCK_SOURCE_ADAT1] = -1, /* not supported */
+ [SAFFIREPRO_CLOCK_SOURCE_ADAT2] = -1, /* not supported */
+ [SAFFIREPRO_CLOCK_SOURCE_WORDCLOCK] = 2,
+ },
+ /* SaffirePro 26 */
+ [1] = {
+ [SAFFIREPRO_CLOCK_SOURCE_INTERNAL] = 0,
+ [SAFFIREPRO_CLOCK_SOURCE_SKIP] = -1, /* not supported */
+ [SAFFIREPRO_CLOCK_SOURCE_SPDIF] = 1,
+ [SAFFIREPRO_CLOCK_SOURCE_ADAT1] = 2,
+ [SAFFIREPRO_CLOCK_SOURCE_ADAT2] = 3,
+ [SAFFIREPRO_CLOCK_SOURCE_WORDCLOCK] = 4,
+ }
};
+
static int
saffirepro_both_clk_freq_get(struct snd_bebob *bebob, unsigned int *rate)
{
return saffire_write_quad(bebob, SAFFIREPRO_RATE_NOREBOOT, id);
}
+
+/*
+ * query hardware for current clock source, return our internally
+ * used clock index in *id, depending on hardware.
+ */
static int
saffirepro_both_clk_src_get(struct snd_bebob *bebob, unsigned int *id)
{
int err;
- u32 value;
+ u32 value; /* clock source read from hw register */
+ const signed char *map;
err = saffire_read_quad(bebob, SAFFIREPRO_OFFSET_CLOCK_SOURCE, &value);
if (err < 0)
goto end;
- if (bebob->spec->clock->labels == saffirepro_10_clk_src_labels) {
- if (value == SAFFIREPRO_CLOCK_SOURCE_WORDCLOCK)
- *id = 2;
- else if (value == SAFFIREPRO_CLOCK_SOURCE_SPDIF)
- *id = 1;
- } else if (value > 1) {
- *id = value - 1;
+ /* depending on hardware, use a different mapping */
+ if (bebob->spec->clock->labels == saffirepro_10_clk_src_labels)
+ map = saffirepro_clk_maps[0];
+ else
+ map = saffirepro_clk_maps[1];
+
+ /* In a case that this driver cannot handle the value of register. */
+ if (value >= SAFFIREPRO_CLOCK_SOURCE_COUNT || map[value] < 0) {
+ err = -EIO;
+ goto end;
}
+
+ *id = (unsigned int)map[value];
end:
return err;
}
/* 1.The device has its own operation to switch source of clock */
if (clk_spec) {
err = clk_spec->get(bebob, &id);
- if (err < 0)
+ if (err < 0) {
dev_err(&bebob->unit->device,
"fail to get clock source: %d\n", err);
- else if (strncmp(clk_spec->labels[id], SND_BEBOB_CLOCK_INTERNAL,
- strlen(SND_BEBOB_CLOCK_INTERNAL)) == 0)
+ goto end;
+ }
+
+ if (id >= clk_spec->num) {
+ dev_err(&bebob->unit->device,
+ "clock source %d out of range 0..%d\n",
+ id, clk_spec->num - 1);
+ err = -EIO;
+ goto end;
+ }
+
+ if (strncmp(clk_spec->labels[id], SND_BEBOB_CLOCK_INTERNAL,
+ strlen(SND_BEBOB_CLOCK_INTERNAL)) == 0)
*internal = true;
+
goto end;
}
if (err < 0)
goto end;
- *id = (enable_ext & 0x01) | ((enable_word & 0x01) << 1);
+ if (enable_ext == 0)
+ *id = 0;
+ else if (enable_word == 0)
+ *id = 1;
+ else
+ *id = 2;
end:
return err;
}
/* WARQ is at offset 12 */
tmp = (reg & AD_DS_WSMC_WARQ) ?
- (((reg & AD_DS_WSMC_WARQ >> 12) & 0x01) ? 12 : 18) : 4;
+ ((((reg & AD_DS_WSMC_WARQ) >> 12) & 0x01) ? 12 : 18) : 4;
tmp /= (reg & AD_DS_WSMC_WAST) ? 2 : 1;
snd_iprintf(buffer, "Wave FIFO: %d %s words\n\n", tmp,
/* SYRQ is at offset 4 */
tmp = (reg & AD_DS_WSMC_SYRQ) ?
- (((reg & AD_DS_WSMC_SYRQ >> 4) & 0x01) ? 12 : 18) : 4;
+ ((((reg & AD_DS_WSMC_SYRQ) >> 4) & 0x01) ? 12 : 18) : 4;
tmp /= (reg & AD_DS_WSMC_WAST) ? 2 : 1;
snd_iprintf(buffer, "Synthesis FIFO: %d %s words\n\n", tmp,
/* ACRQ is at offset 4 */
tmp = (reg & AD_DS_RAMC_ACRQ) ?
- (((reg & AD_DS_RAMC_ACRQ >> 4) & 0x01) ? 12 : 18) : 4;
+ ((((reg & AD_DS_RAMC_ACRQ) >> 4) & 0x01) ? 12 : 18) : 4;
tmp /= (reg & AD_DS_RAMC_ADST) ? 2 : 1;
snd_iprintf(buffer, "ADC FIFO: %d %s words\n\n", tmp,
/* RERQ is at offset 12 */
tmp = (reg & AD_DS_RAMC_RERQ) ?
- (((reg & AD_DS_RAMC_RERQ >> 12) & 0x01) ? 12 : 18) : 4;
+ ((((reg & AD_DS_RAMC_RERQ) >> 12) & 0x01) ? 12 : 18) : 4;
tmp /= (reg & AD_DS_RAMC_ADST) ? 2 : 1;
snd_iprintf(buffer, "Resampler FIFO: %d %s words\n\n", tmp,
"{Intel, LPT_LP},"
"{Intel, WPT_LP},"
"{Intel, SPT},"
+ "{Intel, SPT_LP},"
"{Intel, HPT},"
"{Intel, PBG},"
"{Intel, SCH},"
/* quirks for ATI/AMD HDMI */
#define AZX_DCAPS_PRESET_ATI_HDMI \
- (AZX_DCAPS_NO_TCSEL | AZX_DCAPS_SYNC_WRITE | AZX_DCAPS_POSFIX_LPIB)
+ (AZX_DCAPS_NO_TCSEL | AZX_DCAPS_SYNC_WRITE | AZX_DCAPS_POSFIX_LPIB|\
+ AZX_DCAPS_NO_MSI64)
/* quirks for Nvidia */
#define AZX_DCAPS_PRESET_NVIDIA \
#ifdef CONFIG_SND_DMA_SGBUF
if (dmab->dev.type == SNDRV_DMA_TYPE_DEV_SG) {
struct snd_sg_buf *sgbuf = dmab->private_data;
+ if (chip->driver_type == AZX_DRIVER_CMEDIA)
+ return; /* deal with only CORB/RIRB buffers */
if (on)
set_pages_array_wc(sgbuf->page_table, sgbuf->pages);
else
struct snd_card *card = chip->card;
int err;
unsigned short gcap;
+ unsigned int dma_bits = 64;
#if BITS_PER_LONG != 64
/* Fix up base address on ULI M5461 */
return -ENXIO;
}
- if (chip->msi)
+ if (chip->msi) {
+ if (chip->driver_caps & AZX_DCAPS_NO_MSI64) {
+ dev_dbg(card->dev, "Disabling 64bit MSI\n");
+ pci->no_64bit_msi = true;
+ }
if (pci_enable_msi(pci) < 0)
chip->msi = 0;
+ }
if (azx_acquire_irq(chip, 0) < 0)
return -EBUSY;
gcap = azx_readw(chip, GCAP);
dev_dbg(card->dev, "chipset global capabilities = 0x%x\n", gcap);
+ /* AMD devices support 40 or 48bit DMA, take the safe one */
+ if (chip->pci->vendor == PCI_VENDOR_ID_AMD)
+ dma_bits = 40;
+
/* disable SB600 64bit support for safety */
if (chip->pci->vendor == PCI_VENDOR_ID_ATI) {
struct pci_dev *p_smbus;
+ dma_bits = 40;
p_smbus = pci_get_device(PCI_VENDOR_ID_ATI,
PCI_DEVICE_ID_ATI_SBX00_SMBUS,
NULL);
}
/* allow 64bit DMA address if supported by H/W */
- if ((gcap & AZX_GCAP_64OK) && !pci_set_dma_mask(pci, DMA_BIT_MASK(64)))
- pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(64));
- else {
+ if (!(gcap & AZX_GCAP_64OK))
+ dma_bits = 32;
+ if (!pci_set_dma_mask(pci, DMA_BIT_MASK(dma_bits))) {
+ pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(dma_bits));
+ } else {
pci_set_dma_mask(pci, DMA_BIT_MASK(32));
pci_set_consistent_dma_mask(pci, DMA_BIT_MASK(32));
}
#ifdef CONFIG_X86
struct azx_pcm *apcm = snd_pcm_substream_chip(substream);
struct azx *chip = apcm->chip;
- if (!azx_snoop(chip))
+ if (!azx_snoop(chip) && chip->driver_type != AZX_DRIVER_CMEDIA)
area->vm_page_prot = pgprot_writecombine(area->vm_page_prot);
#endif
}
/* Sunrise Point */
{ PCI_DEVICE(0x8086, 0xa170),
.driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
+ /* Sunrise Point-LP */
+ { PCI_DEVICE(0x8086, 0x9d70),
+ .driver_data = AZX_DRIVER_PCH | AZX_DCAPS_INTEL_PCH },
/* Haswell */
{ PCI_DEVICE(0x8086, 0x0a0c),
.driver_data = AZX_DRIVER_HDMI | AZX_DCAPS_INTEL_HASWELL },
.subvendor = _subvendor,\
.name = _name,\
.value = _value,\
- .pins = (const struct hda_pintbl[]) { _pins } \
+ .pins = (const struct hda_pintbl[]) { _pins, {0, 0}} \
}
#else
{ .codec = _codec,\
.subvendor = _subvendor,\
.value = _value,\
- .pins = (const struct hda_pintbl[]) { _pins } \
+ .pins = (const struct hda_pintbl[]) { _pins, {0, 0}} \
}
#endif
#define AZX_DCAPS_PM_RUNTIME (1 << 26) /* runtime PM support */
#define AZX_DCAPS_I915_POWERWELL (1 << 27) /* HSW i915 powerwell support */
#define AZX_DCAPS_CORBRP_SELF_CLEAR (1 << 28) /* CORBRP clears itself after reset */
+#define AZX_DCAPS_NO_MSI64 (1 << 29) /* Stick to 32-bit MSIs */
/* HD Audio class code */
#define PCI_CLASS_MULTIMEDIA_HD_AUDIO 0x0403
unsigned int num_eapds;
hda_nid_t eapds[4];
bool dynamic_eapd;
+ hda_nid_t mute_led_eapd;
unsigned int parse_flags; /* flag for snd_hda_parse_pin_defcfg() */
cx_auto_turn_eapd(codec, spec->num_eapds, spec->eapds, enabled);
}
+/* turn on/off EAPD according to Master switch (inversely!) for mute LED */
+static void cx_auto_vmaster_hook_mute_led(void *private_data, int enabled)
+{
+ struct hda_codec *codec = private_data;
+ struct conexant_spec *spec = codec->spec;
+
+ snd_hda_codec_write(codec, spec->mute_led_eapd, 0,
+ AC_VERB_SET_EAPD_BTLENABLE,
+ enabled ? 0x00 : 0x02);
+}
+
static int cx_auto_build_controls(struct hda_codec *codec)
{
int err;
CXT_FIXUP_TOSHIBA_P105,
CXT_FIXUP_HP_530,
CXT_FIXUP_CAP_MIX_AMP_5047,
+ CXT_FIXUP_MUTE_LED_EAPD,
};
/* for hda_fixup_thinkpad_acpi() */
}
}
+static void cxt_fixup_mute_led_eapd(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ struct conexant_spec *spec = codec->spec;
+
+ if (action == HDA_FIXUP_ACT_PRE_PROBE) {
+ spec->mute_led_eapd = 0x1b;
+ spec->dynamic_eapd = 1;
+ spec->gen.vmaster_mute.hook = cx_auto_vmaster_hook_mute_led;
+ }
+}
+
/*
* Fix max input level on mixer widget to 0dB
* (originally it has 0x2b steps with 0dB offset 0x14)
.type = HDA_FIXUP_FUNC,
.v.func = cxt_fixup_cap_mix_amp_5047,
},
+ [CXT_FIXUP_MUTE_LED_EAPD] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = cxt_fixup_mute_led_eapd,
+ },
};
static const struct snd_pci_quirk cxt5045_fixups[] = {
SND_PCI_QUIRK(0x17aa, 0x21cf, "Lenovo T520", CXT_PINCFG_LENOVO_TP410),
SND_PCI_QUIRK(0x17aa, 0x21da, "Lenovo X220", CXT_PINCFG_LENOVO_TP410),
SND_PCI_QUIRK(0x17aa, 0x21db, "Lenovo X220-tablet", CXT_PINCFG_LENOVO_TP410),
+ SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo IdeaPad Z560", CXT_FIXUP_MUTE_LED_EAPD),
SND_PCI_QUIRK(0x17aa, 0x3975, "Lenovo U300s", CXT_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x17aa, 0x3977, "Lenovo IdeaPad U310", CXT_FIXUP_STEREO_DMIC),
SND_PCI_QUIRK(0x17aa, 0x397b, "Lenovo S205", CXT_FIXUP_STEREO_DMIC),
{ .id = CXT_PINCFG_LEMOTE_A1004, .name = "lemote-a1004" },
{ .id = CXT_PINCFG_LEMOTE_A1205, .name = "lemote-a1205" },
{ .id = CXT_FIXUP_OLPC_XO, .name = "olpc-xo" },
+ { .id = CXT_FIXUP_MUTE_LED_EAPD, .name = "mute-led-eapd" },
{}
};
}
}
- if (pin_eld->eld_valid && !eld->eld_valid) {
- update_eld = true;
+ if (pin_eld->eld_valid != eld->eld_valid)
eld_changed = true;
- }
+
+ if (pin_eld->eld_valid && !eld->eld_valid)
+ update_eld = true;
+
if (update_eld) {
bool old_eld_valid = pin_eld->eld_valid;
pin_eld->eld_valid = eld->eld_valid;
- eld_changed = pin_eld->eld_size != eld->eld_size ||
+ if (pin_eld->eld_size != eld->eld_size ||
memcmp(pin_eld->eld_buffer, eld->eld_buffer,
- eld->eld_size) != 0;
- if (eld_changed)
+ eld->eld_size) != 0) {
memcpy(pin_eld->eld_buffer, eld->eld_buffer,
eld->eld_size);
+ eld_changed = true;
+ }
pin_eld->eld_size = eld->eld_size;
pin_eld->info = eld->info;
snd_hda_jack_unsol_event(codec, res >> 2);
}
-/* additional initialization for ALC888 variants */
-static void alc888_coef_init(struct hda_codec *codec)
+/* Change EAPD to verb control */
+static void alc_fill_eapd_coef(struct hda_codec *codec)
{
- if (alc_get_coef0(codec) == 0x20)
- /* alc888S-VC */
- alc_write_coef_idx(codec, 7, 0x830);
- else
- /* alc888-VB */
- alc_write_coef_idx(codec, 7, 0x3030);
+ int coef;
+
+ coef = alc_get_coef0(codec);
+
+ switch (codec->vendor_id) {
+ case 0x10ec0262:
+ alc_update_coef_idx(codec, 0x7, 0, 1<<5);
+ break;
+ case 0x10ec0267:
+ case 0x10ec0268:
+ alc_update_coef_idx(codec, 0x7, 0, 1<<13);
+ break;
+ case 0x10ec0269:
+ if ((coef & 0x00f0) == 0x0010)
+ alc_update_coef_idx(codec, 0xd, 0, 1<<14);
+ if ((coef & 0x00f0) == 0x0020)
+ alc_update_coef_idx(codec, 0x4, 1<<15, 0);
+ if ((coef & 0x00f0) == 0x0030)
+ alc_update_coef_idx(codec, 0x10, 1<<9, 0);
+ break;
+ case 0x10ec0280:
+ case 0x10ec0284:
+ case 0x10ec0290:
+ case 0x10ec0292:
+ alc_update_coef_idx(codec, 0x4, 1<<15, 0);
+ break;
+ case 0x10ec0233:
+ case 0x10ec0255:
+ case 0x10ec0282:
+ case 0x10ec0283:
+ case 0x10ec0286:
+ case 0x10ec0288:
+ alc_update_coef_idx(codec, 0x10, 1<<9, 0);
+ break;
+ case 0x10ec0285:
+ case 0x10ec0293:
+ alc_update_coef_idx(codec, 0xa, 1<<13, 0);
+ break;
+ case 0x10ec0662:
+ if ((coef & 0x00f0) == 0x0030)
+ alc_update_coef_idx(codec, 0x4, 1<<10, 0); /* EAPD Ctrl */
+ break;
+ case 0x10ec0272:
+ case 0x10ec0273:
+ case 0x10ec0663:
+ case 0x10ec0665:
+ case 0x10ec0670:
+ case 0x10ec0671:
+ case 0x10ec0672:
+ alc_update_coef_idx(codec, 0xd, 0, 1<<14); /* EAPD Ctrl */
+ break;
+ case 0x10ec0668:
+ alc_update_coef_idx(codec, 0x7, 3<<13, 0);
+ break;
+ case 0x10ec0867:
+ alc_update_coef_idx(codec, 0x4, 1<<10, 0);
+ break;
+ case 0x10ec0888:
+ if ((coef & 0x00f0) == 0x0020 || (coef & 0x00f0) == 0x0030)
+ alc_update_coef_idx(codec, 0x7, 1<<5, 0);
+ break;
+ case 0x10ec0892:
+ alc_update_coef_idx(codec, 0x7, 1<<5, 0);
+ break;
+ case 0x10ec0899:
+ case 0x10ec0900:
+ alc_update_coef_idx(codec, 0x7, 1<<1, 0);
+ break;
+ }
}
-/* additional initialization for ALC889 variants */
-static void alc889_coef_init(struct hda_codec *codec)
+/* additional initialization for ALC888 variants */
+static void alc888_coef_init(struct hda_codec *codec)
{
- alc_update_coef_idx(codec, 7, 0, 0x2010);
+ switch (alc_get_coef0(codec) & 0x00f0) {
+ /* alc888-VA */
+ case 0x00:
+ /* alc888-VB */
+ case 0x10:
+ alc_update_coef_idx(codec, 7, 0, 0x2030); /* Turn EAPD to High */
+ break;
+ }
}
/* turn on/off EAPD control (only if available) */
/* generic EAPD initialization */
static void alc_auto_init_amp(struct hda_codec *codec, int type)
{
+ alc_fill_eapd_coef(codec);
alc_auto_setup_eapd(codec, true);
switch (type) {
case ALC_INIT_GPIO1:
case 0x10ec0260:
alc_update_coefex_idx(codec, 0x1a, 7, 0, 0x2010);
break;
- case 0x10ec0262:
case 0x10ec0880:
case 0x10ec0882:
case 0x10ec0883:
case 0x10ec0885:
- case 0x10ec0887:
- /*case 0x10ec0889:*/ /* this causes an SPDIF problem */
- case 0x10ec0900:
- alc889_coef_init(codec);
+ alc_update_coef_idx(codec, 7, 0, 0x2030);
break;
case 0x10ec0888:
alc888_coef_init(codec);
break;
-#if 0 /* XXX: This may cause the silent output on speaker on some machines */
- case 0x10ec0267:
- case 0x10ec0268:
- alc_update_coef_idx(codec, 7, 0, 0x3000);
- break;
-#endif /* XXX */
}
break;
}
{
if (action != HDA_FIXUP_ACT_INIT)
return;
- alc889_coef_init(codec);
+ alc_update_coef_idx(codec, 7, 0, 0x2030);
}
/* toggle speaker-output according to the hp-jack state */
static struct coef_fw alc282_coefs[] = {
WRITE_COEF(0x03, 0x0002), /* Power Down Control */
- WRITE_COEF(0x05, 0x0700), /* FIFO and filter clock */
+ UPDATE_COEF(0x05, 0xff3f, 0x0700), /* FIFO and filter clock */
WRITE_COEF(0x07, 0x0200), /* DMIC control */
UPDATE_COEF(0x06, 0x00f0, 0), /* Analog clock */
UPDATE_COEF(0x08, 0xfffc, 0x0c2c), /* JD */
static struct coef_fw alc283_coefs[] = {
WRITE_COEF(0x03, 0x0002), /* Power Down Control */
- WRITE_COEF(0x05, 0x0700), /* FIFO and filter clock */
+ UPDATE_COEF(0x05, 0xff3f, 0x0700), /* FIFO and filter clock */
WRITE_COEF(0x07, 0x0200), /* DMIC control */
UPDATE_COEF(0x06, 0x00f0, 0), /* Analog clock */
UPDATE_COEF(0x08, 0xfffc, 0x0c2c), /* JD */
UPDATE_COEF(0x40, 0xf800, 0x9800), /* Class D DC enable */
UPDATE_COEF(0x42, 0xf000, 0x2000), /* DC offset */
WRITE_COEF(0x37, 0xfc06), /* Class D amp control */
+ UPDATE_COEF(0x1b, 0x8000, 0), /* HP JD control */
{}
};
alc_write_coef_idx(codec, 0x43, 0x9004);
+ /*depop hp during suspend*/
+ alc_write_coef_idx(codec, 0x06, 0x2100);
+
snd_hda_codec_write(codec, hp_pin, 0,
AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE);
}
}
+static void alc280_fixup_hp_gpio4(struct hda_codec *codec,
+ const struct hda_fixup *fix, int action)
+{
+ /* Like hp_gpio_mic1_led, but also needs GPIO4 low to enable headphone amp */
+ struct alc_spec *spec = codec->spec;
+ static const struct hda_verb gpio_init[] = {
+ { 0x01, AC_VERB_SET_GPIO_MASK, 0x18 },
+ { 0x01, AC_VERB_SET_GPIO_DIRECTION, 0x18 },
+ {}
+ };
+
+ if (action == HDA_FIXUP_ACT_PRE_PROBE) {
+ spec->gen.vmaster_mute.hook = alc269_fixup_hp_gpio_mute_hook;
+ spec->gen.cap_sync_hook = alc269_fixup_hp_cap_mic_mute_hook;
+ spec->gpio_led = 0;
+ spec->cap_mute_led_nid = 0x18;
+ snd_hda_add_verbs(codec, gpio_init);
+ codec->power_filter = led_power_filter;
+ }
+}
+
static void alc269_fixup_hp_line1_mic1_led(struct hda_codec *codec,
const struct hda_fixup *fix, int action)
{
ALC283_FIXUP_BXBT2807_MIC,
ALC255_FIXUP_DELL_WMI_MIC_MUTE_LED,
ALC282_FIXUP_ASPIRE_V5_PINS,
+ ALC280_FIXUP_HP_GPIO4,
};
static const struct hda_fixup alc269_fixups[] = {
[ALC269_FIXUP_HEADSET_MODE] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc_fixup_headset_mode,
+ .chained = true,
+ .chain_id = ALC255_FIXUP_DELL_WMI_MIC_MUTE_LED
},
[ALC269_FIXUP_HEADSET_MODE_NO_HP_MIC] = {
.type = HDA_FIXUP_FUNC,
[ALC255_FIXUP_HEADSET_MODE] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc_fixup_headset_mode_alc255,
+ .chained = true,
+ .chain_id = ALC255_FIXUP_DELL_WMI_MIC_MUTE_LED
},
[ALC255_FIXUP_HEADSET_MODE_NO_HP_MIC] = {
.type = HDA_FIXUP_FUNC,
[ALC255_FIXUP_DELL_WMI_MIC_MUTE_LED] = {
.type = HDA_FIXUP_FUNC,
.v.func = alc_fixup_dell_wmi,
- .chained_before = true,
- .chain_id = ALC255_FIXUP_DELL1_MIC_NO_PRESENCE
},
[ALC282_FIXUP_ASPIRE_V5_PINS] = {
.type = HDA_FIXUP_PINS,
{ },
},
},
-
+ [ALC280_FIXUP_HP_GPIO4] = {
+ .type = HDA_FIXUP_FUNC,
+ .v.func = alc280_fixup_hp_gpio4,
+ },
};
static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x1028, 0x05f4, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x05f5, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x05f6, "Dell", ALC269_FIXUP_DELL1_MIC_NO_PRESENCE),
- SND_PCI_QUIRK(0x1028, 0x0610, "Dell", ALC255_FIXUP_DELL_WMI_MIC_MUTE_LED),
SND_PCI_QUIRK(0x1028, 0x0615, "Dell Vostro 5470", ALC290_FIXUP_SUBWOOFER_HSJACK),
SND_PCI_QUIRK(0x1028, 0x0616, "Dell Vostro 5470", ALC290_FIXUP_SUBWOOFER_HSJACK),
- SND_PCI_QUIRK(0x1028, 0x061f, "Dell", ALC255_FIXUP_DELL_WMI_MIC_MUTE_LED),
SND_PCI_QUIRK(0x1028, 0x0638, "Dell Inspiron 5439", ALC290_FIXUP_MONO_SPEAKERS_HSJACK),
SND_PCI_QUIRK(0x1028, 0x064a, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x064b, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1028, 0x06d9, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1028, 0x06da, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x164a, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x164b, "Dell", ALC293_FIXUP_DELL1_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x103c, 0x1586, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC2),
SND_PCI_QUIRK(0x103c, 0x22cf, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x22dc, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x22fb, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x8004, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
/* ALC290 */
SND_PCI_QUIRK(0x103c, 0x221b, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2221, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2225, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x2246, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x2247, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x2248, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x2249, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2253, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2254, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2255, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2256, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2257, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x2258, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2259, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x225a, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2260, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x2265, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x2272, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2273, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
- SND_PCI_QUIRK(0x103c, 0x2277, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x2278, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED),
SND_PCI_QUIRK(0x103c, 0x227f, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x103c, 0x2282, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1),
SND_PCI_QUIRK(0x17aa, 0x220e, "Thinkpad T440p", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2210, "Thinkpad T540p", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2212, "Thinkpad T440", ALC292_FIXUP_TPT440_DOCK),
- SND_PCI_QUIRK(0x17aa, 0x2214, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
+ SND_PCI_QUIRK(0x17aa, 0x2214, "Thinkpad X240", ALC292_FIXUP_TPT440_DOCK),
SND_PCI_QUIRK(0x17aa, 0x2215, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
SND_PCI_QUIRK(0x17aa, 0x3978, "IdeaPad Y410P", ALC269_FIXUP_NO_SHUTUP),
SND_PCI_QUIRK(0x17aa, 0x5013, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST),
{0x17, 0x40000000},
{0x1d, 0x40700001},
{0x21, 0x02211040}),
+ SND_HDA_PIN_QUIRK(0x10ec0280, 0x103c, "HP", ALC280_FIXUP_HP_GPIO4,
+ {0x12, 0x90a60130},
+ {0x13, 0x40000000},
+ {0x14, 0x90170110},
+ {0x15, 0x0421101f},
+ {0x16, 0x411111f0},
+ {0x17, 0x411111f0},
+ {0x18, 0x411111f0},
+ {0x19, 0x411111f0},
+ {0x1a, 0x04a11020},
+ {0x1b, 0x411111f0},
+ {0x1d, 0x40748605},
+ {0x1e, 0x411111f0}),
SND_HDA_PIN_QUIRK(0x10ec0280, 0x103c, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED,
{0x12, 0x90a60140},
{0x13, 0x40000000},
}
}
- /* Class D */
- alc_update_coef_idx(codec, 0xd, 0, 1<<14);
-
/* HP */
alc_update_coef_idx(codec, 0x4, 0, 1<<11);
}
unsigned int oldval = spec->gpio_led;
if (enabled)
- spec->gpio_led &= ~0x01;
- else
spec->gpio_led |= 0x01;
+ else
+ spec->gpio_led &= ~0x01;
if (spec->gpio_led != oldval)
snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA,
spec->gpio_led);
}
}
+static struct coef_fw alc668_coefs[] = {
+ WRITE_COEF(0x01, 0xbebe), WRITE_COEF(0x02, 0xaaaa), WRITE_COEF(0x03, 0x0),
+ WRITE_COEF(0x04, 0x0180), WRITE_COEF(0x06, 0x0), WRITE_COEF(0x07, 0x0f80),
+ WRITE_COEF(0x08, 0x0031), WRITE_COEF(0x0a, 0x0060), WRITE_COEF(0x0b, 0x0),
+ WRITE_COEF(0x0c, 0x7cf7), WRITE_COEF(0x0d, 0x1080), WRITE_COEF(0x0e, 0x7f7f),
+ WRITE_COEF(0x0f, 0xcccc), WRITE_COEF(0x10, 0xddcc), WRITE_COEF(0x11, 0x0001),
+ WRITE_COEF(0x13, 0x0), WRITE_COEF(0x14, 0x2aa0), WRITE_COEF(0x17, 0xa940),
+ WRITE_COEF(0x19, 0x0), WRITE_COEF(0x1a, 0x0), WRITE_COEF(0x1b, 0x0),
+ WRITE_COEF(0x1c, 0x0), WRITE_COEF(0x1d, 0x0), WRITE_COEF(0x1e, 0x7418),
+ WRITE_COEF(0x1f, 0x0804), WRITE_COEF(0x20, 0x4200), WRITE_COEF(0x21, 0x0468),
+ WRITE_COEF(0x22, 0x8ccc), WRITE_COEF(0x23, 0x0250), WRITE_COEF(0x24, 0x7418),
+ WRITE_COEF(0x27, 0x0), WRITE_COEF(0x28, 0x8ccc), WRITE_COEF(0x2a, 0xff00),
+ WRITE_COEF(0x2b, 0x8000), WRITE_COEF(0xa7, 0xff00), WRITE_COEF(0xa8, 0x8000),
+ WRITE_COEF(0xaa, 0x2e17), WRITE_COEF(0xab, 0xa0c0), WRITE_COEF(0xac, 0x0),
+ WRITE_COEF(0xad, 0x0), WRITE_COEF(0xae, 0x2ac6), WRITE_COEF(0xaf, 0xa480),
+ WRITE_COEF(0xb0, 0x0), WRITE_COEF(0xb1, 0x0), WRITE_COEF(0xb2, 0x0),
+ WRITE_COEF(0xb3, 0x0), WRITE_COEF(0xb4, 0x0), WRITE_COEF(0xb5, 0x1040),
+ WRITE_COEF(0xb6, 0xd697), WRITE_COEF(0xb7, 0x902b), WRITE_COEF(0xb8, 0xd697),
+ WRITE_COEF(0xb9, 0x902b), WRITE_COEF(0xba, 0xb8ba), WRITE_COEF(0xbb, 0xaaab),
+ WRITE_COEF(0xbc, 0xaaaf), WRITE_COEF(0xbd, 0x6aaa), WRITE_COEF(0xbe, 0x1c02),
+ WRITE_COEF(0xc0, 0x00ff), WRITE_COEF(0xc1, 0x0fa6),
+ {}
+};
+
+static void alc668_restore_default_value(struct hda_codec *codec)
+{
+ alc_process_coef_fw(codec, alc668_coefs);
+}
+
enum {
ALC662_FIXUP_ASPIRE,
ALC662_FIXUP_LED_GPIO1,
SND_PCI_QUIRK(0x1028, 0x0626, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x0696, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x1028, 0x0698, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
+ SND_PCI_QUIRK(0x1028, 0x069f, "Dell", ALC668_FIXUP_DELL_MIC_NO_PRESENCE),
SND_PCI_QUIRK(0x103c, 0x1632, "HP RP5800", ALC662_FIXUP_HP_RP5800),
SND_PCI_QUIRK(0x1043, 0x11cd, "Asus N550", ALC662_FIXUP_BASS_1A),
SND_PCI_QUIRK(0x1043, 0x1477, "ASUS N56VZ", ALC662_FIXUP_BASS_MODE4_CHMAP),
{}
};
-static void alc662_fill_coef(struct hda_codec *codec)
-{
- int coef;
-
- coef = alc_get_coef0(codec);
-
- switch (codec->vendor_id) {
- case 0x10ec0662:
- if ((coef & 0x00f0) == 0x0030)
- alc_update_coef_idx(codec, 0x4, 1<<10, 0); /* EAPD Ctrl */
- break;
- case 0x10ec0272:
- case 0x10ec0273:
- case 0x10ec0663:
- case 0x10ec0665:
- case 0x10ec0670:
- case 0x10ec0671:
- case 0x10ec0672:
- alc_update_coef_idx(codec, 0xd, 0, 1<<14); /* EAPD Ctrl */
- break;
- }
-}
-
/*
*/
static int patch_alc662(struct hda_codec *codec)
alc_fix_pll_init(codec, 0x20, 0x04, 15);
- spec->init_hook = alc662_fill_coef;
- alc662_fill_coef(codec);
+ switch (codec->vendor_id) {
+ case 0x10ec0668:
+ spec->init_hook = alc668_restore_default_value;
+ break;
+ }
snd_hda_pick_fixup(codec, alc662_fixup_models,
alc662_fixup_tbl, alc662_fixups);
source "sound/soc/pxa/Kconfig"
source "sound/soc/rockchip/Kconfig"
source "sound/soc/samsung/Kconfig"
-source "sound/soc/s6000/Kconfig"
source "sound/soc/sh/Kconfig"
source "sound/soc/sirf/Kconfig"
source "sound/soc/spear/Kconfig"
obj-$(CONFIG_SND_SOC) += pxa/
obj-$(CONFIG_SND_SOC) += rockchip/
obj-$(CONFIG_SND_SOC) += samsung/
-obj-$(CONFIG_SND_SOC) += s6000/
obj-$(CONFIG_SND_SOC) += sh/
obj-$(CONFIG_SND_SOC) += sirf/
obj-$(CONFIG_SND_SOC) += spear/
2, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY("Slew Clock", ADAU1761_CLK_ENABLE0, 6, 0, NULL, 0),
+ SND_SOC_DAPM_SUPPLY("ALC Clock", ADAU1761_CLK_ENABLE0, 5, 0, NULL, 0),
SND_SOC_DAPM_SUPPLY_S("Digital Clock 0", 1, ADAU1761_CLK_ENABLE1,
0, 0, NULL, 0),
{ "Right Playback Mixer", NULL, "Slew Clock" },
{ "Left Playback Mixer", NULL, "Slew Clock" },
+ { "Left Input Mixer", NULL, "ALC Clock" },
+ { "Right Input Mixer", NULL, "ALC Clock" },
+
{ "Digital Clock 0", NULL, "SYSCLK" },
{ "Digital Clock 1", NULL, "SYSCLK" },
};
.driver = {
.name = "cs42l51",
.owner = THIS_MODULE,
+ .of_match_table = cs42l51_of_match,
},
.probe = cs42l51_i2c_probe,
.remove = cs42l51_i2c_remove,
}
EXPORT_SYMBOL_GPL(cs42l51_probe);
-static const struct of_device_id cs42l51_of_match[] = {
+const struct of_device_id cs42l51_of_match[] = {
{ .compatible = "cirrus,cs42l51", },
{ }
};
MODULE_DEVICE_TABLE(of, cs42l51_of_match);
+EXPORT_SYMBOL_GPL(cs42l51_of_match);
+
MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>");
MODULE_DESCRIPTION("Cirrus Logic CS42L51 ALSA SoC Codec Driver");
MODULE_LICENSE("GPL");
extern const struct regmap_config cs42l51_regmap;
int cs42l51_probe(struct device *dev, struct regmap *regmap);
+extern const struct of_device_id cs42l51_of_match[];
#define CS42L51_CHIP_ID 0x1B
#define CS42L51_CHIP_REV_A 0x00
#include "es8328.h"
static const struct i2c_device_id es8328_id[] = {
- { "everest,es8328", 0 },
+ { "es8328", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, es8328_id);
* 0x02 (when master clk is 20MHz to 40MHz)..
* 0x03 (when master clk is 40MHz to 60MHz)..
*/
- if ((freq >= 10000000) && (freq < 20000000)) {
+ if ((freq >= 10000000) && (freq <= 20000000)) {
snd_soc_write(codec, M98090_REG_SYSTEM_CLOCK,
M98090_PSCLK_DIV1);
- } else if ((freq >= 20000000) && (freq < 40000000)) {
+ } else if ((freq > 20000000) && (freq <= 40000000)) {
snd_soc_write(codec, M98090_REG_SYSTEM_CLOCK,
M98090_PSCLK_DIV2);
- } else if ((freq >= 40000000) && (freq < 60000000)) {
+ } else if ((freq > 40000000) && (freq <= 60000000)) {
snd_soc_write(codec, M98090_REG_SYSTEM_CLOCK,
M98090_PSCLK_DIV4);
} else {
{ 0x76, 0x000a },
{ 0x77, 0x0c00 },
{ 0x78, 0x0000 },
+ { 0x79, 0x0123 },
{ 0x80, 0x0000 },
{ 0x81, 0x0000 },
{ 0x82, 0x0000 },
case RT5645_DMIC_CTRL2:
case RT5645_TDM_CTRL_1:
case RT5645_TDM_CTRL_2:
+ case RT5645_TDM_CTRL_3:
case RT5645_GLB_CLK:
case RT5645_PLL_CTRL1:
case RT5645_PLL_CTRL2:
{ 0x4c, 0x5380 },
{ 0x4f, 0x0073 },
{ 0x52, 0x00d3 },
- { 0x53, 0xf0f0 },
+ { 0x53, 0xf000 },
{ 0x61, 0x0000 },
{ 0x62, 0x0001 },
{ 0x63, 0x00c3 },
{ 0x64, 0x0000 },
- { 0x65, 0x0000 },
+ { 0x65, 0x0001 },
{ 0x66, 0x0000 },
{ 0x6f, 0x8000 },
{ 0x70, 0x8000 },
{ 0x71, 0x8000 },
{ 0x72, 0x8000 },
- { 0x73, 0x1110 },
+ { 0x73, 0x7770 },
{ 0x74, 0x0e00 },
{ 0x75, 0x1505 },
{ 0x76, 0x0015 },
{ 0x83, 0x0000 },
{ 0x84, 0x0000 },
{ 0x85, 0x0000 },
- { 0x86, 0x0008 },
+ { 0x86, 0x0004 },
{ 0x87, 0x0000 },
{ 0x88, 0x0000 },
{ 0x89, 0x0000 },
{ 0x8a, 0x0000 },
{ 0x8b, 0x0000 },
- { 0x8c, 0x0007 },
+ { 0x8c, 0x0003 },
{ 0x8d, 0x0000 },
{ 0x8e, 0x0004 },
{ 0x8f, 0x1100 },
{ 0x90, 0x0646 },
{ 0x91, 0x0c06 },
{ 0x93, 0x0000 },
- { 0x94, 0x0000 },
- { 0x95, 0x0000 },
+ { 0x94, 0x1270 },
+ { 0x95, 0x1000 },
{ 0x97, 0x0000 },
{ 0x98, 0x0000 },
{ 0x99, 0x0000 },
{ 0x9e, 0x0400 },
{ 0xae, 0x7000 },
{ 0xaf, 0x0000 },
- { 0xb0, 0x6000 },
+ { 0xb0, 0x7000 },
{ 0xb1, 0x0000 },
{ 0xb2, 0x0000 },
{ 0xb3, 0x001f },
- { 0xb4, 0x2206 },
+ { 0xb4, 0x220c },
{ 0xb5, 0x1f00 },
{ 0xb6, 0x0000 },
{ 0xb7, 0x0000 },
{ 0xcf, 0x1813 },
{ 0xd0, 0x0690 },
{ 0xd1, 0x1c17 },
- { 0xd3, 0xb320 },
+ { 0xd3, 0xa220 },
{ 0xd4, 0x0000 },
{ 0xd6, 0x0400 },
{ 0xd9, 0x0809 },
{ 0xda, 0x0000 },
{ 0xdb, 0x0001 },
{ 0xdc, 0x0049 },
- { 0xdd, 0x0009 },
+ { 0xdd, 0x0024 },
{ 0xe6, 0x8000 },
{ 0xe7, 0x0000 },
- { 0xec, 0xb300 },
+ { 0xec, 0xa200 },
{ 0xed, 0x0000 },
- { 0xee, 0xb300 },
+ { 0xee, 0xa200 },
{ 0xef, 0x0000 },
{ 0xf8, 0x0000 },
{ 0xf9, 0x0000 },
{ 0xfa, 0x8010 },
{ 0xfb, 0x0033 },
- { 0xfc, 0x0080 },
+ { 0xfc, 0x0100 },
};
static bool rt5670_volatile_register(struct device *dev, unsigned int reg)
{ "DAC1 MIXR", "DAC1 Switch", "DAC1 R Mux" },
{ "DAC1 MIXR", NULL, "DAC Stereo1 Filter" },
+ { "DAC Stereo1 Filter", NULL, "PLL1", is_sys_clk_from_pll },
+ { "DAC Mono Left Filter", NULL, "PLL1", is_sys_clk_from_pll },
+ { "DAC Mono Right Filter", NULL, "PLL1", is_sys_clk_from_pll },
+
{ "DAC MIX", NULL, "DAC1 MIXL" },
{ "DAC MIX", NULL, "DAC1 MIXR" },
{ "DAC L1", NULL, "DAC L1 Power" },
{ "DAC L1", NULL, "Stereo DAC MIXL" },
- { "DAC L1", NULL, "PLL1", is_sys_clk_from_pll },
{ "DAC R1", NULL, "DAC R1 Power" },
{ "DAC R1", NULL, "Stereo DAC MIXR" },
- { "DAC R1", NULL, "PLL1", is_sys_clk_from_pll },
{ "DAC L2", NULL, "Mono DAC MIXL" },
- { "DAC L2", NULL, "PLL1", is_sys_clk_from_pll },
{ "DAC R2", NULL, "Mono DAC MIXR" },
- { "DAC R2", NULL, "PLL1", is_sys_clk_from_pll },
{ "OUT MIXL", "BST1 Switch", "BST1" },
{ "OUT MIXL", "INL Switch", "INL VOL" },
/* enable small pop, introduce 400ms delay in turning off */
snd_soc_update_bits(codec, SGTL5000_CHIP_REF_CTRL,
- SGTL5000_SMALL_POP,
- SGTL5000_SMALL_POP);
+ SGTL5000_SMALL_POP, 1);
/* disable short cut detector */
snd_soc_write(codec, SGTL5000_CHIP_SHORT_CTRL, 0);
#define SGTL5000_BIAS_CTRL_MASK 0x000e
#define SGTL5000_BIAS_CTRL_SHIFT 1
#define SGTL5000_BIAS_CTRL_WIDTH 3
-#define SGTL5000_SMALL_POP 0x0001
+#define SGTL5000_SMALL_POP 0
/*
* SGTL5000_CHIP_MIC_CTRL
file, blocks, pos - firmware->size);
out_fw:
+ regmap_async_complete(regmap);
release_firmware(firmware);
wm_adsp_buf_free(&buf_list);
out:
}
}
+static struct reg_default fsl_asrc_reg[] = {
+ { REG_ASRCTR, 0x0000 }, { REG_ASRIER, 0x0000 },
+ { REG_ASRCNCR, 0x0000 }, { REG_ASRCFG, 0x0000 },
+ { REG_ASRCSR, 0x0000 }, { REG_ASRCDR1, 0x0000 },
+ { REG_ASRCDR2, 0x0000 }, { REG_ASRSTR, 0x0000 },
+ { REG_ASRRA, 0x0000 }, { REG_ASRRB, 0x0000 },
+ { REG_ASRRC, 0x0000 }, { REG_ASRPM1, 0x0000 },
+ { REG_ASRPM2, 0x0000 }, { REG_ASRPM3, 0x0000 },
+ { REG_ASRPM4, 0x0000 }, { REG_ASRPM5, 0x0000 },
+ { REG_ASRTFR1, 0x0000 }, { REG_ASRCCR, 0x0000 },
+ { REG_ASRDIA, 0x0000 }, { REG_ASRDOA, 0x0000 },
+ { REG_ASRDIB, 0x0000 }, { REG_ASRDOB, 0x0000 },
+ { REG_ASRDIC, 0x0000 }, { REG_ASRDOC, 0x0000 },
+ { REG_ASRIDRHA, 0x0000 }, { REG_ASRIDRLA, 0x0000 },
+ { REG_ASRIDRHB, 0x0000 }, { REG_ASRIDRLB, 0x0000 },
+ { REG_ASRIDRHC, 0x0000 }, { REG_ASRIDRLC, 0x0000 },
+ { REG_ASR76K, 0x0A47 }, { REG_ASR56K, 0x0DF3 },
+ { REG_ASRMCRA, 0x0000 }, { REG_ASRFSTA, 0x0000 },
+ { REG_ASRMCRB, 0x0000 }, { REG_ASRFSTB, 0x0000 },
+ { REG_ASRMCRC, 0x0000 }, { REG_ASRFSTC, 0x0000 },
+ { REG_ASRMCR1A, 0x0000 }, { REG_ASRMCR1B, 0x0000 },
+ { REG_ASRMCR1C, 0x0000 },
+};
+
static const struct regmap_config fsl_asrc_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
.val_bits = 32,
.max_register = REG_ASRMCR1C,
+ .reg_defaults = fsl_asrc_reg,
+ .num_reg_defaults = ARRAY_SIZE(fsl_asrc_reg),
.readable_reg = fsl_asrc_readable_reg,
.volatile_reg = fsl_asrc_volatile_reg,
.writeable_reg = fsl_asrc_writeable_reg,
return -ENOMEM;
asrc_priv->pdev = pdev;
- strcpy(asrc_priv->name, np->name);
+ strncpy(asrc_priv->name, np->name, sizeof(asrc_priv->name) - 1);
/* Get the addresses and IRQ */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
return -ENOMEM;
esai_priv->pdev = pdev;
- strcpy(esai_priv->name, np->name);
+ strncpy(esai_priv->name, np->name, sizeof(esai_priv->name) - 1);
/* Get the addresses and IRQ */
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
}
#define HSW_FORMATS \
- (SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S24_LE | \
- SNDRV_PCM_FMTBIT_S20_3LE | SNDRV_PCM_FMTBIT_S16_LE |\
- SNDRV_PCM_FMTBIT_S8)
+ (SNDRV_PCM_FMTBIT_S24_LE | SNDRV_PCM_FMTBIT_S16_LE)
static struct snd_soc_dai_driver hsw_dais[] = {
{
while (val) {
regmap_read(i2s->regmap, I2S_CLR, &val);
retry--;
- if (!retry)
+ if (!retry) {
dev_warn(i2s->dev, "fail to clear\n");
+ break;
+ }
}
}
}
+++ /dev/null
-config SND_S6000_SOC
- tristate "SoC Audio for the Stretch s6000 family"
- depends on XTENSA_VARIANT_S6000 || COMPILE_TEST
- depends on HAS_IOMEM
- select SND_S6000_SOC_PCM if XTENSA_VARIANT_S6000
- help
- Say Y or M if you want to add support for codecs attached to
- s6000 family chips. You will also need to select the platform
- to support below.
-
-config SND_S6000_SOC_PCM
- tristate
-
-config SND_S6000_SOC_I2S
- tristate
-
-config SND_S6000_SOC_S6IPCAM
- bool "SoC Audio support for Stretch 6105 IP Camera"
- depends on SND_S6000_SOC=y
- depends on I2C=y
- depends on XTENSA_PLATFORM_S6105 || COMPILE_TEST
- select SND_S6000_SOC_I2S
- select SND_SOC_TLV320AIC3X
- help
- Say Y if you want to add support for SoC audio on the
- Stretch s6105 IP Camera Reference Design.
+++ /dev/null
-# s6000 Platform Support
-snd-soc-s6000-objs := s6000-pcm.o
-snd-soc-s6000-i2s-objs := s6000-i2s.o
-
-obj-$(CONFIG_SND_S6000_SOC_PCM) += snd-soc-s6000.o
-obj-$(CONFIG_SND_S6000_SOC_I2S) += snd-soc-s6000-i2s.o
-
-# s6105 Machine Support
-snd-soc-s6ipcam-objs := s6105-ipcam.o
-
-obj-$(CONFIG_SND_S6000_SOC_S6IPCAM) += snd-soc-s6ipcam.o
+++ /dev/null
-/*
- * ALSA SoC I2S Audio Layer for the Stretch S6000 family
- *
- * Author: Daniel Gloeckner, <dg@emlix.com>
- * Copyright: (C) 2009 emlix GmbH <info@emlix.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/device.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/interrupt.h>
-#include <linux/io.h>
-#include <linux/slab.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/initval.h>
-#include <sound/soc.h>
-
-#include "s6000-i2s.h"
-#include "s6000-pcm.h"
-
-struct s6000_i2s_dev {
- dma_addr_t sifbase;
- u8 __iomem *scbbase;
- unsigned int wide;
- unsigned int channel_in;
- unsigned int channel_out;
- unsigned int lines_in;
- unsigned int lines_out;
- struct s6000_pcm_dma_params dma_params;
-};
-
-#define S6_I2S_INTERRUPT_STATUS 0x00
-#define S6_I2S_INT_OVERRUN 1
-#define S6_I2S_INT_UNDERRUN 2
-#define S6_I2S_INT_ALIGNMENT 4
-#define S6_I2S_INTERRUPT_ENABLE 0x04
-#define S6_I2S_INTERRUPT_RAW 0x08
-#define S6_I2S_INTERRUPT_CLEAR 0x0C
-#define S6_I2S_INTERRUPT_SET 0x10
-#define S6_I2S_MODE 0x20
-#define S6_I2S_DUAL 0
-#define S6_I2S_WIDE 1
-#define S6_I2S_TX_DEFAULT 0x24
-#define S6_I2S_DATA_CFG(c) (0x40 + 0x10 * (c))
-#define S6_I2S_IN 0
-#define S6_I2S_OUT 1
-#define S6_I2S_UNUSED 2
-#define S6_I2S_INTERFACE_CFG(c) (0x44 + 0x10 * (c))
-#define S6_I2S_DIV_MASK 0x001fff
-#define S6_I2S_16BIT 0x000000
-#define S6_I2S_20BIT 0x002000
-#define S6_I2S_24BIT 0x004000
-#define S6_I2S_32BIT 0x006000
-#define S6_I2S_BITS_MASK 0x006000
-#define S6_I2S_MEM_16BIT 0x000000
-#define S6_I2S_MEM_32BIT 0x008000
-#define S6_I2S_MEM_MASK 0x008000
-#define S6_I2S_CHANNELS_SHIFT 16
-#define S6_I2S_CHANNELS_MASK 0x030000
-#define S6_I2S_SCK_IN 0x000000
-#define S6_I2S_SCK_OUT 0x040000
-#define S6_I2S_SCK_DIR 0x040000
-#define S6_I2S_WS_IN 0x000000
-#define S6_I2S_WS_OUT 0x080000
-#define S6_I2S_WS_DIR 0x080000
-#define S6_I2S_LEFT_FIRST 0x000000
-#define S6_I2S_RIGHT_FIRST 0x100000
-#define S6_I2S_FIRST 0x100000
-#define S6_I2S_CUR_SCK 0x200000
-#define S6_I2S_CUR_WS 0x400000
-#define S6_I2S_ENABLE(c) (0x48 + 0x10 * (c))
-#define S6_I2S_DISABLE_IF 0x02
-#define S6_I2S_ENABLE_IF 0x03
-#define S6_I2S_IS_BUSY 0x04
-#define S6_I2S_DMA_ACTIVE 0x08
-#define S6_I2S_IS_ENABLED 0x10
-
-#define S6_I2S_NUM_LINES 4
-
-#define S6_I2S_SIF_PORT0 0x0000000
-#define S6_I2S_SIF_PORT1 0x0000080 /* docs say 0x0000010 */
-
-static inline void s6_i2s_write_reg(struct s6000_i2s_dev *dev, int reg, u32 val)
-{
- writel(val, dev->scbbase + reg);
-}
-
-static inline u32 s6_i2s_read_reg(struct s6000_i2s_dev *dev, int reg)
-{
- return readl(dev->scbbase + reg);
-}
-
-static inline void s6_i2s_mod_reg(struct s6000_i2s_dev *dev, int reg,
- u32 mask, u32 val)
-{
- val ^= s6_i2s_read_reg(dev, reg) & ~mask;
- s6_i2s_write_reg(dev, reg, val);
-}
-
-static void s6000_i2s_start_channel(struct s6000_i2s_dev *dev, int channel)
-{
- int i, j, cur, prev;
-
- /*
- * Wait for WCLK to toggle 5 times before enabling the channel
- * s6000 Family Datasheet 3.6.4:
- * "At least two cycles of WS must occur between commands
- * to disable or enable the interface"
- */
- j = 0;
- prev = ~S6_I2S_CUR_WS;
- for (i = 1000000; --i && j < 6; ) {
- cur = s6_i2s_read_reg(dev, S6_I2S_INTERFACE_CFG(channel))
- & S6_I2S_CUR_WS;
- if (prev != cur) {
- prev = cur;
- j++;
- }
- }
- if (j < 6)
- printk(KERN_WARNING "s6000-i2s: timeout waiting for WCLK\n");
-
- s6_i2s_write_reg(dev, S6_I2S_ENABLE(channel), S6_I2S_ENABLE_IF);
-}
-
-static void s6000_i2s_stop_channel(struct s6000_i2s_dev *dev, int channel)
-{
- s6_i2s_write_reg(dev, S6_I2S_ENABLE(channel), S6_I2S_DISABLE_IF);
-}
-
-static void s6000_i2s_start(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(rtd->cpu_dai);
- int channel;
-
- channel = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
- dev->channel_out : dev->channel_in;
-
- s6000_i2s_start_channel(dev, channel);
-}
-
-static void s6000_i2s_stop(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(rtd->cpu_dai);
- int channel;
-
- channel = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) ?
- dev->channel_out : dev->channel_in;
-
- s6000_i2s_stop_channel(dev, channel);
-}
-
-static int s6000_i2s_trigger(struct snd_pcm_substream *substream, int cmd,
- int after)
-{
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- case SNDRV_PCM_TRIGGER_RESUME:
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- if ((substream->stream == SNDRV_PCM_STREAM_CAPTURE) ^ !after)
- s6000_i2s_start(substream);
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- case SNDRV_PCM_TRIGGER_SUSPEND:
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- if (!after)
- s6000_i2s_stop(substream);
- }
- return 0;
-}
-
-static unsigned int s6000_i2s_int_sources(struct s6000_i2s_dev *dev)
-{
- unsigned int pending;
- pending = s6_i2s_read_reg(dev, S6_I2S_INTERRUPT_RAW);
- pending &= S6_I2S_INT_ALIGNMENT |
- S6_I2S_INT_UNDERRUN |
- S6_I2S_INT_OVERRUN;
- s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_CLEAR, pending);
-
- return pending;
-}
-
-static unsigned int s6000_i2s_check_xrun(struct snd_soc_dai *cpu_dai)
-{
- struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(cpu_dai);
- unsigned int errors;
- unsigned int ret;
-
- errors = s6000_i2s_int_sources(dev);
- if (likely(!errors))
- return 0;
-
- ret = 0;
- if (errors & S6_I2S_INT_ALIGNMENT)
- printk(KERN_ERR "s6000-i2s: WCLK misaligned\n");
- if (errors & S6_I2S_INT_UNDERRUN)
- ret |= 1 << SNDRV_PCM_STREAM_PLAYBACK;
- if (errors & S6_I2S_INT_OVERRUN)
- ret |= 1 << SNDRV_PCM_STREAM_CAPTURE;
- return ret;
-}
-
-static void s6000_i2s_wait_disabled(struct s6000_i2s_dev *dev)
-{
- int channel;
- int n = 50;
- for (channel = 0; channel < 2; channel++) {
- while (--n >= 0) {
- int v = s6_i2s_read_reg(dev, S6_I2S_ENABLE(channel));
- if ((v & S6_I2S_IS_ENABLED)
- || !(v & (S6_I2S_DMA_ACTIVE | S6_I2S_IS_BUSY)))
- break;
- udelay(20);
- }
- }
- if (n < 0)
- printk(KERN_WARNING "s6000-i2s: timeout disabling interfaces");
-}
-
-static int s6000_i2s_set_dai_fmt(struct snd_soc_dai *cpu_dai,
- unsigned int fmt)
-{
- struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(cpu_dai);
- u32 w;
-
- switch (fmt & SND_SOC_DAIFMT_MASTER_MASK) {
- case SND_SOC_DAIFMT_CBM_CFM:
- w = S6_I2S_SCK_IN | S6_I2S_WS_IN;
- break;
- case SND_SOC_DAIFMT_CBS_CFM:
- w = S6_I2S_SCK_OUT | S6_I2S_WS_IN;
- break;
- case SND_SOC_DAIFMT_CBM_CFS:
- w = S6_I2S_SCK_IN | S6_I2S_WS_OUT;
- break;
- case SND_SOC_DAIFMT_CBS_CFS:
- w = S6_I2S_SCK_OUT | S6_I2S_WS_OUT;
- break;
- default:
- return -EINVAL;
- }
-
- switch (fmt & SND_SOC_DAIFMT_INV_MASK) {
- case SND_SOC_DAIFMT_NB_NF:
- w |= S6_I2S_LEFT_FIRST;
- break;
- case SND_SOC_DAIFMT_NB_IF:
- w |= S6_I2S_RIGHT_FIRST;
- break;
- default:
- return -EINVAL;
- }
-
- s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(0),
- S6_I2S_FIRST | S6_I2S_WS_DIR | S6_I2S_SCK_DIR, w);
- s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(1),
- S6_I2S_FIRST | S6_I2S_WS_DIR | S6_I2S_SCK_DIR, w);
-
- return 0;
-}
-
-static int s6000_i2s_set_clkdiv(struct snd_soc_dai *dai, int div_id, int div)
-{
- struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
-
- if (!div || (div & 1) || div > (S6_I2S_DIV_MASK + 1) * 2)
- return -EINVAL;
-
- s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(div_id),
- S6_I2S_DIV_MASK, div / 2 - 1);
- return 0;
-}
-
-static int s6000_i2s_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params,
- struct snd_soc_dai *dai)
-{
- struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
- int interf;
- u32 w = 0;
-
- if (dev->wide)
- interf = 0;
- else {
- w |= (((params_channels(params) - 2) / 2)
- << S6_I2S_CHANNELS_SHIFT) & S6_I2S_CHANNELS_MASK;
- interf = (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- ? dev->channel_out : dev->channel_in;
- }
-
- switch (params_format(params)) {
- case SNDRV_PCM_FORMAT_S16_LE:
- w |= S6_I2S_16BIT | S6_I2S_MEM_16BIT;
- break;
- case SNDRV_PCM_FORMAT_S32_LE:
- w |= S6_I2S_32BIT | S6_I2S_MEM_32BIT;
- break;
- default:
- printk(KERN_WARNING "s6000-i2s: unsupported PCM format %x\n",
- params_format(params));
- return -EINVAL;
- }
-
- if (s6_i2s_read_reg(dev, S6_I2S_INTERFACE_CFG(interf))
- & S6_I2S_IS_ENABLED) {
- printk(KERN_ERR "s6000-i2s: interface already enabled\n");
- return -EBUSY;
- }
-
- s6_i2s_mod_reg(dev, S6_I2S_INTERFACE_CFG(interf),
- S6_I2S_CHANNELS_MASK|S6_I2S_MEM_MASK|S6_I2S_BITS_MASK,
- w);
-
- return 0;
-}
-
-static int s6000_i2s_dai_probe(struct snd_soc_dai *dai)
-{
- struct s6000_i2s_dev *dev = snd_soc_dai_get_drvdata(dai);
- struct s6000_snd_platform_data *pdata = dai->dev->platform_data;
-
- if (!pdata)
- return -EINVAL;
-
- dai->capture_dma_data = &dev->dma_params;
- dai->playback_dma_data = &dev->dma_params;
-
- dev->wide = pdata->wide;
- dev->channel_in = pdata->channel_in;
- dev->channel_out = pdata->channel_out;
- dev->lines_in = pdata->lines_in;
- dev->lines_out = pdata->lines_out;
-
- s6_i2s_write_reg(dev, S6_I2S_MODE,
- dev->wide ? S6_I2S_WIDE : S6_I2S_DUAL);
-
- if (dev->wide) {
- int i;
-
- if (dev->lines_in + dev->lines_out > S6_I2S_NUM_LINES)
- return -EINVAL;
-
- dev->channel_in = 0;
- dev->channel_out = 1;
- dai->driver->capture.channels_min = 2 * dev->lines_in;
- dai->driver->capture.channels_max = dai->driver->capture.channels_min;
- dai->driver->playback.channels_min = 2 * dev->lines_out;
- dai->driver->playback.channels_max = dai->driver->playback.channels_min;
-
- for (i = 0; i < dev->lines_out; i++)
- s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(i), S6_I2S_OUT);
-
- for (; i < S6_I2S_NUM_LINES - dev->lines_in; i++)
- s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(i),
- S6_I2S_UNUSED);
-
- for (; i < S6_I2S_NUM_LINES; i++)
- s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(i), S6_I2S_IN);
- } else {
- unsigned int cfg[2] = {S6_I2S_UNUSED, S6_I2S_UNUSED};
-
- if (dev->lines_in > 1 || dev->lines_out > 1)
- return -EINVAL;
-
- dai->driver->capture.channels_min = 2 * dev->lines_in;
- dai->driver->capture.channels_max = 8 * dev->lines_in;
- dai->driver->playback.channels_min = 2 * dev->lines_out;
- dai->driver->playback.channels_max = 8 * dev->lines_out;
-
- if (dev->lines_in)
- cfg[dev->channel_in] = S6_I2S_IN;
- if (dev->lines_out)
- cfg[dev->channel_out] = S6_I2S_OUT;
-
- s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(0), cfg[0]);
- s6_i2s_write_reg(dev, S6_I2S_DATA_CFG(1), cfg[1]);
- }
-
- if (dev->lines_out) {
- if (dev->lines_in) {
- if (!dev->dma_params.dma_out)
- return -ENODEV;
- } else {
- dev->dma_params.dma_out = dev->dma_params.dma_in;
- dev->dma_params.dma_in = 0;
- }
- }
- dev->dma_params.sif_in = dev->sifbase + (dev->channel_in ?
- S6_I2S_SIF_PORT1 : S6_I2S_SIF_PORT0);
- dev->dma_params.sif_out = dev->sifbase + (dev->channel_out ?
- S6_I2S_SIF_PORT1 : S6_I2S_SIF_PORT0);
- dev->dma_params.same_rate = pdata->same_rate | pdata->wide;
- return 0;
-}
-
-#define S6000_I2S_RATES SNDRV_PCM_RATE_CONTINUOUS
-#define S6000_I2S_FORMATS (SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S32_LE)
-
-static const struct snd_soc_dai_ops s6000_i2s_dai_ops = {
- .set_fmt = s6000_i2s_set_dai_fmt,
- .set_clkdiv = s6000_i2s_set_clkdiv,
- .hw_params = s6000_i2s_hw_params,
-};
-
-static struct snd_soc_dai_driver s6000_i2s_dai = {
- .probe = s6000_i2s_dai_probe,
- .playback = {
- .channels_min = 2,
- .channels_max = 8,
- .formats = S6000_I2S_FORMATS,
- .rates = S6000_I2S_RATES,
- .rate_min = 0,
- .rate_max = 1562500,
- },
- .capture = {
- .channels_min = 2,
- .channels_max = 8,
- .formats = S6000_I2S_FORMATS,
- .rates = S6000_I2S_RATES,
- .rate_min = 0,
- .rate_max = 1562500,
- },
- .ops = &s6000_i2s_dai_ops,
-};
-
-static const struct snd_soc_component_driver s6000_i2s_component = {
- .name = "s6000-i2s",
-};
-
-static int s6000_i2s_probe(struct platform_device *pdev)
-{
- struct s6000_i2s_dev *dev;
- struct resource *scbmem, *sifmem, *region, *dma1, *dma2;
- u8 __iomem *mmio;
- int ret;
-
- scbmem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- if (!scbmem) {
- dev_err(&pdev->dev, "no mem resource?\n");
- ret = -ENODEV;
- goto err_release_none;
- }
-
- region = request_mem_region(scbmem->start, resource_size(scbmem),
- pdev->name);
- if (!region) {
- dev_err(&pdev->dev, "I2S SCB region already claimed\n");
- ret = -EBUSY;
- goto err_release_none;
- }
-
- mmio = ioremap(scbmem->start, resource_size(scbmem));
- if (!mmio) {
- dev_err(&pdev->dev, "can't ioremap SCB region\n");
- ret = -ENOMEM;
- goto err_release_scb;
- }
-
- sifmem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
- if (!sifmem) {
- dev_err(&pdev->dev, "no second mem resource?\n");
- ret = -ENODEV;
- goto err_release_map;
- }
-
- region = request_mem_region(sifmem->start, resource_size(sifmem),
- pdev->name);
- if (!region) {
- dev_err(&pdev->dev, "I2S SIF region already claimed\n");
- ret = -EBUSY;
- goto err_release_map;
- }
-
- dma1 = platform_get_resource(pdev, IORESOURCE_DMA, 0);
- if (!dma1) {
- dev_err(&pdev->dev, "no dma resource?\n");
- ret = -ENODEV;
- goto err_release_sif;
- }
-
- region = request_mem_region(dma1->start, resource_size(dma1),
- pdev->name);
- if (!region) {
- dev_err(&pdev->dev, "I2S DMA region already claimed\n");
- ret = -EBUSY;
- goto err_release_sif;
- }
-
- dma2 = platform_get_resource(pdev, IORESOURCE_DMA, 1);
- if (dma2) {
- region = request_mem_region(dma2->start, resource_size(dma2),
- pdev->name);
- if (!region) {
- dev_err(&pdev->dev,
- "I2S DMA region already claimed\n");
- ret = -EBUSY;
- goto err_release_dma1;
- }
- }
-
- dev = kzalloc(sizeof(struct s6000_i2s_dev), GFP_KERNEL);
- if (!dev) {
- ret = -ENOMEM;
- goto err_release_dma2;
- }
- dev_set_drvdata(&pdev->dev, dev);
-
- dev->sifbase = sifmem->start;
- dev->scbbase = mmio;
-
- s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_ENABLE, 0);
- s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_CLEAR,
- S6_I2S_INT_ALIGNMENT |
- S6_I2S_INT_UNDERRUN |
- S6_I2S_INT_OVERRUN);
-
- s6000_i2s_stop_channel(dev, 0);
- s6000_i2s_stop_channel(dev, 1);
- s6000_i2s_wait_disabled(dev);
-
- dev->dma_params.check_xrun = s6000_i2s_check_xrun;
- dev->dma_params.trigger = s6000_i2s_trigger;
- dev->dma_params.dma_in = dma1->start;
- dev->dma_params.dma_out = dma2 ? dma2->start : 0;
- dev->dma_params.irq = platform_get_irq(pdev, 0);
- if (dev->dma_params.irq < 0) {
- dev_err(&pdev->dev, "no irq resource?\n");
- ret = -ENODEV;
- goto err_release_dev;
- }
-
- s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_ENABLE,
- S6_I2S_INT_ALIGNMENT |
- S6_I2S_INT_UNDERRUN |
- S6_I2S_INT_OVERRUN);
-
- ret = snd_soc_register_component(&pdev->dev, &s6000_i2s_component,
- &s6000_i2s_dai, 1);
- if (ret)
- goto err_release_dev;
-
- return 0;
-
-err_release_dev:
- kfree(dev);
-err_release_dma2:
- if (dma2)
- release_mem_region(dma2->start, resource_size(dma2));
-err_release_dma1:
- release_mem_region(dma1->start, resource_size(dma1));
-err_release_sif:
- release_mem_region(sifmem->start, resource_size(sifmem));
-err_release_map:
- iounmap(mmio);
-err_release_scb:
- release_mem_region(scbmem->start, resource_size(scbmem));
-err_release_none:
- return ret;
-}
-
-static int s6000_i2s_remove(struct platform_device *pdev)
-{
- struct s6000_i2s_dev *dev = dev_get_drvdata(&pdev->dev);
- struct resource *region;
- void __iomem *mmio = dev->scbbase;
-
- snd_soc_unregister_component(&pdev->dev);
-
- s6000_i2s_stop_channel(dev, 0);
- s6000_i2s_stop_channel(dev, 1);
-
- s6_i2s_write_reg(dev, S6_I2S_INTERRUPT_ENABLE, 0);
- kfree(dev);
-
- region = platform_get_resource(pdev, IORESOURCE_DMA, 0);
- release_mem_region(region->start, resource_size(region));
-
- region = platform_get_resource(pdev, IORESOURCE_DMA, 1);
- if (region)
- release_mem_region(region->start, resource_size(region));
-
- region = platform_get_resource(pdev, IORESOURCE_MEM, 0);
- release_mem_region(region->start, resource_size(region));
-
- iounmap(mmio);
- region = platform_get_resource(pdev, IORESOURCE_IO, 0);
- release_mem_region(region->start, resource_size(region));
-
- return 0;
-}
-
-static struct platform_driver s6000_i2s_driver = {
- .probe = s6000_i2s_probe,
- .remove = s6000_i2s_remove,
- .driver = {
- .name = "s6000-i2s",
- .owner = THIS_MODULE,
- },
-};
-
-module_platform_driver(s6000_i2s_driver);
-
-MODULE_AUTHOR("Daniel Gloeckner");
-MODULE_DESCRIPTION("Stretch s6000 family I2S SoC Interface");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * ALSA SoC I2S Audio Layer for the Stretch s6000 family
- *
- * Author: Daniel Gloeckner, <dg@emlix.com>
- * Copyright: (C) 2009 emlix GmbH <info@emlix.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _S6000_I2S_H
-#define _S6000_I2S_H
-
-struct s6000_snd_platform_data {
- int lines_in;
- int lines_out;
- int channel_in;
- int channel_out;
- int wide;
- int same_rate;
-};
-#endif
+++ /dev/null
-/*
- * ALSA PCM interface for the Stetch s6000 family
- *
- * Author: Daniel Gloeckner, <dg@emlix.com>
- * Copyright: (C) 2009 emlix GmbH <info@emlix.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/dma-mapping.h>
-#include <linux/interrupt.h>
-
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/pcm_params.h>
-#include <sound/soc.h>
-
-#include <asm/dma.h>
-#include <variant/dmac.h>
-
-#include "s6000-pcm.h"
-
-#define S6_PCM_PREALLOCATE_SIZE (96 * 1024)
-#define S6_PCM_PREALLOCATE_MAX (2048 * 1024)
-
-static struct snd_pcm_hardware s6000_pcm_hardware = {
- .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_JOINT_DUPLEX),
- .buffer_bytes_max = 0x7ffffff0,
- .period_bytes_min = 16,
- .period_bytes_max = 0xfffff0,
- .periods_min = 2,
- .periods_max = 1024, /* no limit */
- .fifo_size = 0,
-};
-
-struct s6000_runtime_data {
- spinlock_t lock;
- int period; /* current DMA period */
-};
-
-static void s6000_pcm_enqueue_dma(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct s6000_runtime_data *prtd = runtime->private_data;
- struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
- struct s6000_pcm_dma_params *par;
- int channel;
- unsigned int period_size;
- unsigned int dma_offset;
- dma_addr_t dma_pos;
- dma_addr_t src, dst;
-
- par = snd_soc_dai_get_dma_data(soc_runtime->cpu_dai, substream);
-
- period_size = snd_pcm_lib_period_bytes(substream);
- dma_offset = prtd->period * period_size;
- dma_pos = runtime->dma_addr + dma_offset;
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- src = dma_pos;
- dst = par->sif_out;
- channel = par->dma_out;
- } else {
- src = par->sif_in;
- dst = dma_pos;
- channel = par->dma_in;
- }
-
- if (!s6dmac_channel_enabled(DMA_MASK_DMAC(channel),
- DMA_INDEX_CHNL(channel)))
- return;
-
- if (s6dmac_fifo_full(DMA_MASK_DMAC(channel), DMA_INDEX_CHNL(channel))) {
- printk(KERN_ERR "s6000-pcm: fifo full\n");
- return;
- }
-
- if (WARN_ON(period_size & 15))
- return;
- s6dmac_put_fifo(DMA_MASK_DMAC(channel), DMA_INDEX_CHNL(channel),
- src, dst, period_size);
-
- prtd->period++;
- if (unlikely(prtd->period >= runtime->periods))
- prtd->period = 0;
-}
-
-static irqreturn_t s6000_pcm_irq(int irq, void *data)
-{
- struct snd_pcm *pcm = data;
- struct snd_soc_pcm_runtime *runtime = pcm->private_data;
- struct s6000_runtime_data *prtd;
- unsigned int has_xrun;
- int i, ret = IRQ_NONE;
-
- for (i = 0; i < 2; ++i) {
- struct snd_pcm_substream *substream = pcm->streams[i].substream;
- struct s6000_pcm_dma_params *params =
- snd_soc_dai_get_dma_data(runtime->cpu_dai, substream);
- u32 channel;
- unsigned int pending;
-
- if (substream == SNDRV_PCM_STREAM_PLAYBACK)
- channel = params->dma_out;
- else
- channel = params->dma_in;
-
- has_xrun = params->check_xrun(runtime->cpu_dai);
-
- if (!channel)
- continue;
-
- if (unlikely(has_xrun & (1 << i)) &&
- substream->runtime &&
- snd_pcm_running(substream)) {
- dev_dbg(pcm->dev, "xrun\n");
- snd_pcm_stream_lock(substream);
- snd_pcm_stop(substream, SNDRV_PCM_STATE_XRUN);
- snd_pcm_stream_unlock(substream);
- ret = IRQ_HANDLED;
- }
-
- pending = s6dmac_int_sources(DMA_MASK_DMAC(channel),
- DMA_INDEX_CHNL(channel));
-
- if (pending & 1) {
- ret = IRQ_HANDLED;
- if (likely(substream->runtime &&
- snd_pcm_running(substream))) {
- snd_pcm_period_elapsed(substream);
- dev_dbg(pcm->dev, "period elapsed %x %x\n",
- s6dmac_cur_src(DMA_MASK_DMAC(channel),
- DMA_INDEX_CHNL(channel)),
- s6dmac_cur_dst(DMA_MASK_DMAC(channel),
- DMA_INDEX_CHNL(channel)));
- prtd = substream->runtime->private_data;
- spin_lock(&prtd->lock);
- s6000_pcm_enqueue_dma(substream);
- spin_unlock(&prtd->lock);
- }
- }
-
- if (unlikely(pending & ~7)) {
- if (pending & (1 << 3))
- printk(KERN_WARNING
- "s6000-pcm: DMA %x Underflow\n",
- channel);
- if (pending & (1 << 4))
- printk(KERN_WARNING
- "s6000-pcm: DMA %x Overflow\n",
- channel);
- if (pending & 0x1e0)
- printk(KERN_WARNING
- "s6000-pcm: DMA %x Master Error "
- "(mask %x)\n",
- channel, pending >> 5);
-
- }
- }
-
- return ret;
-}
-
-static int s6000_pcm_start(struct snd_pcm_substream *substream)
-{
- struct s6000_runtime_data *prtd = substream->runtime->private_data;
- struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
- struct s6000_pcm_dma_params *par;
- unsigned long flags;
- int srcinc;
- u32 dma;
-
- par = snd_soc_dai_get_dma_data(soc_runtime->cpu_dai, substream);
-
- spin_lock_irqsave(&prtd->lock, flags);
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
- srcinc = 1;
- dma = par->dma_out;
- } else {
- srcinc = 0;
- dma = par->dma_in;
- }
- s6dmac_enable_chan(DMA_MASK_DMAC(dma), DMA_INDEX_CHNL(dma),
- 1 /* priority 1 (0 is max) */,
- 0 /* peripheral requests w/o xfer length mode */,
- srcinc /* source address increment */,
- srcinc^1 /* destination address increment */,
- 0 /* chunksize 0 (skip impossible on this dma) */,
- 0 /* source skip after chunk (impossible) */,
- 0 /* destination skip after chunk (impossible) */,
- 4 /* 16 byte burst size */,
- -1 /* don't conserve bandwidth */,
- 0 /* low watermark irq descriptor threshold */,
- 0 /* disable hardware timestamps */,
- 1 /* enable channel */);
-
- s6000_pcm_enqueue_dma(substream);
- s6000_pcm_enqueue_dma(substream);
-
- spin_unlock_irqrestore(&prtd->lock, flags);
-
- return 0;
-}
-
-static int s6000_pcm_stop(struct snd_pcm_substream *substream)
-{
- struct s6000_runtime_data *prtd = substream->runtime->private_data;
- struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
- struct s6000_pcm_dma_params *par;
- unsigned long flags;
- u32 channel;
-
- par = snd_soc_dai_get_dma_data(soc_runtime->cpu_dai, substream);
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- channel = par->dma_out;
- else
- channel = par->dma_in;
-
- s6dmac_set_terminal_count(DMA_MASK_DMAC(channel),
- DMA_INDEX_CHNL(channel), 0);
-
- spin_lock_irqsave(&prtd->lock, flags);
-
- s6dmac_disable_chan(DMA_MASK_DMAC(channel), DMA_INDEX_CHNL(channel));
-
- spin_unlock_irqrestore(&prtd->lock, flags);
-
- return 0;
-}
-
-static int s6000_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
-{
- struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
- struct s6000_pcm_dma_params *par;
- int ret;
-
- par = snd_soc_dai_get_dma_data(soc_runtime->cpu_dai, substream);
-
- ret = par->trigger(substream, cmd, 0);
- if (ret < 0)
- return ret;
-
- switch (cmd) {
- case SNDRV_PCM_TRIGGER_START:
- case SNDRV_PCM_TRIGGER_RESUME:
- case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- ret = s6000_pcm_start(substream);
- break;
- case SNDRV_PCM_TRIGGER_STOP:
- case SNDRV_PCM_TRIGGER_SUSPEND:
- case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- ret = s6000_pcm_stop(substream);
- break;
- default:
- ret = -EINVAL;
- }
- if (ret < 0)
- return ret;
-
- return par->trigger(substream, cmd, 1);
-}
-
-static int s6000_pcm_prepare(struct snd_pcm_substream *substream)
-{
- struct s6000_runtime_data *prtd = substream->runtime->private_data;
-
- prtd->period = 0;
-
- return 0;
-}
-
-static snd_pcm_uframes_t s6000_pcm_pointer(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
- struct s6000_pcm_dma_params *par;
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct s6000_runtime_data *prtd = runtime->private_data;
- unsigned long flags;
- unsigned int offset;
- dma_addr_t count;
-
- par = snd_soc_dai_get_dma_data(soc_runtime->cpu_dai, substream);
-
- spin_lock_irqsave(&prtd->lock, flags);
-
- if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
- count = s6dmac_cur_src(DMA_MASK_DMAC(par->dma_out),
- DMA_INDEX_CHNL(par->dma_out));
- else
- count = s6dmac_cur_dst(DMA_MASK_DMAC(par->dma_in),
- DMA_INDEX_CHNL(par->dma_in));
-
- count -= runtime->dma_addr;
-
- spin_unlock_irqrestore(&prtd->lock, flags);
-
- offset = bytes_to_frames(runtime, count);
- if (unlikely(offset >= runtime->buffer_size))
- offset = 0;
-
- return offset;
-}
-
-static int s6000_pcm_open(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
- struct s6000_pcm_dma_params *par;
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct s6000_runtime_data *prtd;
- int ret;
-
- par = snd_soc_dai_get_dma_data(soc_runtime->cpu_dai, substream);
- snd_soc_set_runtime_hwparams(substream, &s6000_pcm_hardware);
-
- ret = snd_pcm_hw_constraint_step(runtime, 0,
- SNDRV_PCM_HW_PARAM_PERIOD_BYTES, 16);
- if (ret < 0)
- return ret;
- ret = snd_pcm_hw_constraint_step(runtime, 0,
- SNDRV_PCM_HW_PARAM_BUFFER_BYTES, 16);
- if (ret < 0)
- return ret;
- ret = snd_pcm_hw_constraint_integer(runtime,
- SNDRV_PCM_HW_PARAM_PERIODS);
- if (ret < 0)
- return ret;
-
- if (par->same_rate) {
- int rate;
- spin_lock(&par->lock); /* needed? */
- rate = par->rate;
- spin_unlock(&par->lock);
- if (rate != -1) {
- ret = snd_pcm_hw_constraint_minmax(runtime,
- SNDRV_PCM_HW_PARAM_RATE,
- rate, rate);
- if (ret < 0)
- return ret;
- }
- }
-
- prtd = kzalloc(sizeof(struct s6000_runtime_data), GFP_KERNEL);
- if (prtd == NULL)
- return -ENOMEM;
-
- spin_lock_init(&prtd->lock);
-
- runtime->private_data = prtd;
-
- return 0;
-}
-
-static int s6000_pcm_close(struct snd_pcm_substream *substream)
-{
- struct snd_pcm_runtime *runtime = substream->runtime;
- struct s6000_runtime_data *prtd = runtime->private_data;
-
- kfree(prtd);
-
- return 0;
-}
-
-static int s6000_pcm_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *hw_params)
-{
- struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
- struct s6000_pcm_dma_params *par;
- int ret;
- ret = snd_pcm_lib_malloc_pages(substream,
- params_buffer_bytes(hw_params));
- if (ret < 0) {
- printk(KERN_WARNING "s6000-pcm: allocation of memory failed\n");
- return ret;
- }
-
- par = snd_soc_dai_get_dma_data(soc_runtime->cpu_dai, substream);
-
- if (par->same_rate) {
- spin_lock(&par->lock);
- if (par->rate == -1 ||
- !(par->in_use & ~(1 << substream->stream))) {
- par->rate = params_rate(hw_params);
- par->in_use |= 1 << substream->stream;
- } else if (params_rate(hw_params) != par->rate) {
- snd_pcm_lib_free_pages(substream);
- par->in_use &= ~(1 << substream->stream);
- ret = -EBUSY;
- }
- spin_unlock(&par->lock);
- }
- return ret;
-}
-
-static int s6000_pcm_hw_free(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *soc_runtime = substream->private_data;
- struct s6000_pcm_dma_params *par =
- snd_soc_dai_get_dma_data(soc_runtime->cpu_dai, substream);
-
- spin_lock(&par->lock);
- par->in_use &= ~(1 << substream->stream);
- if (!par->in_use)
- par->rate = -1;
- spin_unlock(&par->lock);
-
- return snd_pcm_lib_free_pages(substream);
-}
-
-static struct snd_pcm_ops s6000_pcm_ops = {
- .open = s6000_pcm_open,
- .close = s6000_pcm_close,
- .ioctl = snd_pcm_lib_ioctl,
- .hw_params = s6000_pcm_hw_params,
- .hw_free = s6000_pcm_hw_free,
- .trigger = s6000_pcm_trigger,
- .prepare = s6000_pcm_prepare,
- .pointer = s6000_pcm_pointer,
-};
-
-static void s6000_pcm_free(struct snd_pcm *pcm)
-{
- struct snd_soc_pcm_runtime *runtime = pcm->private_data;
- struct s6000_pcm_dma_params *params =
- snd_soc_dai_get_dma_data(runtime->cpu_dai,
- pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream);
-
- free_irq(params->irq, pcm);
- snd_pcm_lib_preallocate_free_for_all(pcm);
-}
-
-static int s6000_pcm_new(struct snd_soc_pcm_runtime *runtime)
-{
- struct snd_card *card = runtime->card->snd_card;
- struct snd_pcm *pcm = runtime->pcm;
- struct s6000_pcm_dma_params *params;
- int res;
-
- params = snd_soc_dai_get_dma_data(runtime->cpu_dai,
- pcm->streams[SNDRV_PCM_STREAM_PLAYBACK].substream);
-
- res = dma_coerce_mask_and_coherent(card->dev, DMA_BIT_MASK(32));
- if (res)
- return res;
-
- if (params->dma_in) {
- s6dmac_disable_chan(DMA_MASK_DMAC(params->dma_in),
- DMA_INDEX_CHNL(params->dma_in));
- s6dmac_int_sources(DMA_MASK_DMAC(params->dma_in),
- DMA_INDEX_CHNL(params->dma_in));
- }
-
- if (params->dma_out) {
- s6dmac_disable_chan(DMA_MASK_DMAC(params->dma_out),
- DMA_INDEX_CHNL(params->dma_out));
- s6dmac_int_sources(DMA_MASK_DMAC(params->dma_out),
- DMA_INDEX_CHNL(params->dma_out));
- }
-
- res = request_irq(params->irq, s6000_pcm_irq, IRQF_SHARED,
- "s6000-audio", pcm);
- if (res) {
- printk(KERN_ERR "s6000-pcm couldn't get IRQ\n");
- return res;
- }
-
- res = snd_pcm_lib_preallocate_pages_for_all(pcm,
- SNDRV_DMA_TYPE_DEV,
- card->dev,
- S6_PCM_PREALLOCATE_SIZE,
- S6_PCM_PREALLOCATE_MAX);
- if (res)
- printk(KERN_WARNING "s6000-pcm: preallocation failed\n");
-
- spin_lock_init(¶ms->lock);
- params->in_use = 0;
- params->rate = -1;
- return 0;
-}
-
-static struct snd_soc_platform_driver s6000_soc_platform = {
- .ops = &s6000_pcm_ops,
- .pcm_new = s6000_pcm_new,
- .pcm_free = s6000_pcm_free,
-};
-
-static int s6000_soc_platform_probe(struct platform_device *pdev)
-{
- return snd_soc_register_platform(&pdev->dev, &s6000_soc_platform);
-}
-
-static int s6000_soc_platform_remove(struct platform_device *pdev)
-{
- snd_soc_unregister_platform(&pdev->dev);
- return 0;
-}
-
-static struct platform_driver s6000_pcm_driver = {
- .driver = {
- .name = "s6000-pcm-audio",
- .owner = THIS_MODULE,
- },
-
- .probe = s6000_soc_platform_probe,
- .remove = s6000_soc_platform_remove,
-};
-
-module_platform_driver(s6000_pcm_driver);
-
-MODULE_AUTHOR("Daniel Gloeckner");
-MODULE_DESCRIPTION("Stretch s6000 family PCM DMA module");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/*
- * ALSA PCM interface for the Stretch s6000 family
- *
- * Author: Daniel Gloeckner, <dg@emlix.com>
- * Copyright: (C) 2009 emlix GmbH <info@emlix.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef _S6000_PCM_H
-#define _S6000_PCM_H
-
-struct snd_soc_dai;
-struct snd_pcm_substream;
-
-struct s6000_pcm_dma_params {
- unsigned int (*check_xrun)(struct snd_soc_dai *cpu_dai);
- int (*trigger)(struct snd_pcm_substream *substream, int cmd, int after);
- dma_addr_t sif_in;
- dma_addr_t sif_out;
- u32 dma_in;
- u32 dma_out;
- int irq;
- int same_rate;
-
- spinlock_t lock;
- int in_use;
- int rate;
-};
-
-#endif
+++ /dev/null
-/*
- * ASoC driver for Stretch s6105 IP camera platform
- *
- * Author: Daniel Gloeckner, <dg@emlix.com>
- * Copyright: (C) 2009 emlix GmbH <info@emlix.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/i2c.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-
-#include "s6000-pcm.h"
-#include "s6000-i2s.h"
-
-#define S6105_CAM_CODEC_CLOCK 12288000
-
-static int s6105_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *codec_dai = rtd->codec_dai;
- struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
- int ret = 0;
-
- /* set codec DAI configuration */
- ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_I2S |
- SND_SOC_DAIFMT_CBM_CFM);
- if (ret < 0)
- return ret;
-
- /* set cpu DAI configuration */
- ret = snd_soc_dai_set_fmt(cpu_dai, SND_SOC_DAIFMT_CBM_CFM |
- SND_SOC_DAIFMT_NB_NF);
- if (ret < 0)
- return ret;
-
- /* set the codec system clock */
- ret = snd_soc_dai_set_sysclk(codec_dai, 0, S6105_CAM_CODEC_CLOCK,
- SND_SOC_CLOCK_OUT);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-static struct snd_soc_ops s6105_ops = {
- .hw_params = s6105_hw_params,
-};
-
-/* s6105 machine dapm widgets */
-static const struct snd_soc_dapm_widget aic3x_dapm_widgets[] = {
- SND_SOC_DAPM_LINE("Audio Out Differential", NULL),
- SND_SOC_DAPM_LINE("Audio Out Stereo", NULL),
- SND_SOC_DAPM_LINE("Audio In", NULL),
-};
-
-/* s6105 machine audio_mapnections to the codec pins */
-static const struct snd_soc_dapm_route audio_map[] = {
- /* Audio Out connected to HPLOUT, HPLCOM, HPROUT */
- {"Audio Out Differential", NULL, "HPLOUT"},
- {"Audio Out Differential", NULL, "HPLCOM"},
- {"Audio Out Stereo", NULL, "HPLOUT"},
- {"Audio Out Stereo", NULL, "HPROUT"},
-
- /* Audio In connected to LINE1L, LINE1R */
- {"LINE1L", NULL, "Audio In"},
- {"LINE1R", NULL, "Audio In"},
-};
-
-static int output_type_info(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_info *uinfo)
-{
- uinfo->type = SNDRV_CTL_ELEM_TYPE_ENUMERATED;
- uinfo->count = 1;
- uinfo->value.enumerated.items = 2;
- if (uinfo->value.enumerated.item) {
- uinfo->value.enumerated.item = 1;
- strcpy(uinfo->value.enumerated.name, "HPLOUT/HPROUT");
- } else {
- strcpy(uinfo->value.enumerated.name, "HPLOUT/HPLCOM");
- }
- return 0;
-}
-
-static int output_type_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- ucontrol->value.enumerated.item[0] = kcontrol->private_value;
- return 0;
-}
-
-static int output_type_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct snd_soc_card *card = kcontrol->private_data;
- struct snd_soc_dapm_context *dapm = &card->dapm;
- unsigned int val = (ucontrol->value.enumerated.item[0] != 0);
- char *differential = "Audio Out Differential";
- char *stereo = "Audio Out Stereo";
-
- if (kcontrol->private_value == val)
- return 0;
- kcontrol->private_value = val;
- snd_soc_dapm_disable_pin(dapm, val ? differential : stereo);
- snd_soc_dapm_sync(dapm);
- snd_soc_dapm_enable_pin(dapm, val ? stereo : differential);
- snd_soc_dapm_sync(dapm);
-
- return 1;
-}
-
-static const struct snd_kcontrol_new audio_out_mux = {
- .iface = SNDRV_CTL_ELEM_IFACE_MIXER,
- .name = "Master Output Mux",
- .index = 0,
- .access = SNDRV_CTL_ELEM_ACCESS_READWRITE,
- .info = output_type_info,
- .get = output_type_get,
- .put = output_type_put,
- .private_value = 1 /* default to stereo */
-};
-
-/* Logic for a aic3x as connected on the s6105 ip camera ref design */
-static int s6105_aic3x_init(struct snd_soc_pcm_runtime *rtd)
-{
- struct snd_soc_card *card = rtd->card;
-
- /* must correspond to audio_out_mux.private_value initializer */
- snd_soc_dapm_disable_pin(&card->dapm, "Audio Out Differential");
-
- snd_ctl_add(card->snd_card, snd_ctl_new1(&audio_out_mux, card));
-
- return 0;
-}
-
-/* s6105 digital audio interface glue - connects codec <--> CPU */
-static struct snd_soc_dai_link s6105_dai = {
- .name = "TLV320AIC31",
- .stream_name = "AIC31",
- .cpu_dai_name = "s6000-i2s",
- .codec_dai_name = "tlv320aic3x-hifi",
- .platform_name = "s6000-pcm-audio",
- .codec_name = "tlv320aic3x-codec.0-001a",
- .init = s6105_aic3x_init,
- .ops = &s6105_ops,
-};
-
-/* s6105 audio machine driver */
-static struct snd_soc_card snd_soc_card_s6105 = {
- .name = "Stretch IP Camera",
- .owner = THIS_MODULE,
- .dai_link = &s6105_dai,
- .num_links = 1,
-
- .dapm_widgets = aic3x_dapm_widgets,
- .num_dapm_widgets = ARRAY_SIZE(aic3x_dapm_widgets),
- .dapm_routes = audio_map,
- .num_dapm_routes = ARRAY_SIZE(audio_map),
- .fully_routed = true,
-};
-
-static struct s6000_snd_platform_data s6105_snd_data __initdata = {
- .wide = 0,
- .channel_in = 0,
- .channel_out = 1,
- .lines_in = 1,
- .lines_out = 1,
- .same_rate = 1,
-};
-
-static struct platform_device *s6105_snd_device;
-
-/* temporary i2c device creation until this can be moved into the machine
- * support file.
-*/
-static struct i2c_board_info i2c_device[] = {
- { I2C_BOARD_INFO("tlv320aic33", 0x18), }
-};
-
-static int __init s6105_init(void)
-{
- int ret;
-
- i2c_register_board_info(0, i2c_device, ARRAY_SIZE(i2c_device));
-
- s6105_snd_device = platform_device_alloc("soc-audio", -1);
- if (!s6105_snd_device)
- return -ENOMEM;
-
- platform_set_drvdata(s6105_snd_device, &snd_soc_card_s6105);
- platform_device_add_data(s6105_snd_device, &s6105_snd_data,
- sizeof(s6105_snd_data));
-
- ret = platform_device_add(s6105_snd_device);
- if (ret)
- platform_device_put(s6105_snd_device);
-
- return ret;
-}
-
-static void __exit s6105_exit(void)
-{
- platform_device_unregister(s6105_snd_device);
-}
-
-module_init(s6105_init);
-module_exit(s6105_exit);
-
-MODULE_AUTHOR("Daniel Gloeckner");
-MODULE_DESCRIPTION("Stretch s6105 IP camera ASoC driver");
-MODULE_LICENSE("GPL");
{ .compatible = "google,snow-audio-max98095", },
{},
};
+MODULE_DEVICE_TABLE(of, snow_of_match);
static struct platform_driver snow_driver = {
.driver = {
static struct snd_pcm_hardware fsi_pcm_hardware = {
.info = SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_PAUSE,
+ SNDRV_PCM_INFO_MMAP_VALID,
.buffer_bytes_max = 64 * 1024,
.period_bytes_min = 32,
.period_bytes_max = 8192,
static struct snd_pcm_hardware rsnd_pcm_hardware = {
.info = SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_MMAP |
- SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_PAUSE,
+ SNDRV_PCM_INFO_MMAP_VALID,
.buffer_bytes_max = 64 * 1024,
.period_bytes_min = 32,
.period_bytes_max = 8192,
list_for_each_entry(component, &component_list, list) {
if (dlc->of_node && component->dev->of_node != dlc->of_node)
continue;
- if (dlc->name && strcmp(dev_name(component->dev), dlc->name))
+ if (dlc->name && strcmp(component->name, dlc->name))
continue;
list_for_each_entry(dai, &component->dai_list, list) {
if (dlc->dai_name && strcmp(dai->name, dlc->dai_name))
dpcm_init_runtime_hw(runtime, &cpu_dai_drv->capture);
}
+static int dpcm_fe_dai_do_trigger(struct snd_pcm_substream *substream, int cmd);
+
+/* Set FE's runtime_update state; the state is protected via PCM stream lock
+ * for avoiding the race with trigger callback.
+ * If the state is unset and a trigger is pending while the previous operation,
+ * process the pending trigger action here.
+ */
+static void dpcm_set_fe_update_state(struct snd_soc_pcm_runtime *fe,
+ int stream, enum snd_soc_dpcm_update state)
+{
+ struct snd_pcm_substream *substream =
+ snd_soc_dpcm_get_substream(fe, stream);
+
+ snd_pcm_stream_lock_irq(substream);
+ if (state == SND_SOC_DPCM_UPDATE_NO && fe->dpcm[stream].trigger_pending) {
+ dpcm_fe_dai_do_trigger(substream,
+ fe->dpcm[stream].trigger_pending - 1);
+ fe->dpcm[stream].trigger_pending = 0;
+ }
+ fe->dpcm[stream].runtime_update = state;
+ snd_pcm_stream_unlock_irq(substream);
+}
+
static int dpcm_fe_dai_startup(struct snd_pcm_substream *fe_substream)
{
struct snd_soc_pcm_runtime *fe = fe_substream->private_data;
struct snd_pcm_runtime *runtime = fe_substream->runtime;
int stream = fe_substream->stream, ret = 0;
- fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_FE;
+ dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_FE);
ret = dpcm_be_dai_startup(fe, fe_substream->stream);
if (ret < 0) {
dpcm_set_fe_runtime(fe_substream);
snd_pcm_limit_hw_rates(runtime);
- fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_NO;
+ dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_NO);
return 0;
unwind:
dpcm_be_dai_startup_unwind(fe, fe_substream->stream);
be_err:
- fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_NO;
+ dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_NO);
return ret;
}
struct snd_soc_pcm_runtime *fe = substream->private_data;
int stream = substream->stream;
- fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_FE;
+ dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_FE);
/* shutdown the BEs */
dpcm_be_dai_shutdown(fe, substream->stream);
dpcm_dapm_stream_event(fe, stream, SND_SOC_DAPM_STREAM_STOP);
fe->dpcm[stream].state = SND_SOC_DPCM_STATE_CLOSE;
- fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_NO;
+ dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_NO);
return 0;
}
int err, stream = substream->stream;
mutex_lock_nested(&fe->card->mutex, SND_SOC_CARD_CLASS_RUNTIME);
- fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_FE;
+ dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_FE);
dev_dbg(fe->dev, "ASoC: hw_free FE %s\n", fe->dai_link->name);
err = dpcm_be_dai_hw_free(fe, stream);
fe->dpcm[stream].state = SND_SOC_DPCM_STATE_HW_FREE;
- fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_NO;
+ dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_NO);
mutex_unlock(&fe->card->mutex);
return 0;
int ret, stream = substream->stream;
mutex_lock_nested(&fe->card->mutex, SND_SOC_CARD_CLASS_RUNTIME);
- fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_FE;
+ dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_FE);
memcpy(&fe->dpcm[substream->stream].hw_params, params,
sizeof(struct snd_pcm_hw_params));
fe->dpcm[stream].state = SND_SOC_DPCM_STATE_HW_PARAMS;
out:
- fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_NO;
+ dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_NO);
mutex_unlock(&fe->card->mutex);
return ret;
}
}
EXPORT_SYMBOL_GPL(dpcm_be_dai_trigger);
-static int dpcm_fe_dai_trigger(struct snd_pcm_substream *substream, int cmd)
+static int dpcm_fe_dai_do_trigger(struct snd_pcm_substream *substream, int cmd)
{
struct snd_soc_pcm_runtime *fe = substream->private_data;
int stream = substream->stream, ret;
return ret;
}
+static int dpcm_fe_dai_trigger(struct snd_pcm_substream *substream, int cmd)
+{
+ struct snd_soc_pcm_runtime *fe = substream->private_data;
+ int stream = substream->stream;
+
+ /* if FE's runtime_update is already set, we're in race;
+ * process this trigger later at exit
+ */
+ if (fe->dpcm[stream].runtime_update != SND_SOC_DPCM_UPDATE_NO) {
+ fe->dpcm[stream].trigger_pending = cmd + 1;
+ return 0; /* delayed, assuming it's successful */
+ }
+
+ /* we're alone, let's trigger */
+ return dpcm_fe_dai_do_trigger(substream, cmd);
+}
+
int dpcm_be_dai_prepare(struct snd_soc_pcm_runtime *fe, int stream)
{
struct snd_soc_dpcm *dpcm;
dev_dbg(fe->dev, "ASoC: prepare FE %s\n", fe->dai_link->name);
- fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_FE;
+ dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_FE);
/* there is no point preparing this FE if there are no BEs */
if (list_empty(&fe->dpcm[stream].be_clients)) {
fe->dpcm[stream].state = SND_SOC_DPCM_STATE_PREPARE;
out:
- fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_NO;
+ dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_NO);
mutex_unlock(&fe->card->mutex);
return ret;
{
int ret;
- fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_BE;
+ dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_BE);
ret = dpcm_run_update_startup(fe, stream);
if (ret < 0)
dev_err(fe->dev, "ASoC: failed to startup some BEs\n");
- fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_NO;
+ dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_NO);
return ret;
}
{
int ret;
- fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_BE;
+ dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_BE);
ret = dpcm_run_update_shutdown(fe, stream);
if (ret < 0)
dev_err(fe->dev, "ASoC: failed to shutdown some BEs\n");
- fe->dpcm[stream].runtime_update = SND_SOC_DPCM_UPDATE_NO;
+ dpcm_set_fe_update_state(fe, stream, SND_SOC_DPCM_UPDATE_NO);
return ret;
}
{
struct snd_card *card;
struct list_head *p;
+ bool was_shutdown;
if (chip == (void *)-1L)
return;
card = chip->card;
down_write(&chip->shutdown_rwsem);
+ was_shutdown = chip->shutdown;
chip->shutdown = 1;
up_write(&chip->shutdown_rwsem);
mutex_lock(®ister_mutex);
- chip->num_interfaces--;
- if (chip->num_interfaces <= 0) {
+ if (!was_shutdown) {
struct snd_usb_endpoint *ep;
snd_card_disconnect(card);
list_for_each(p, &chip->mixer_list) {
snd_usb_mixer_disconnect(p);
}
+ }
+
+ chip->num_interfaces--;
+ if (chip->num_interfaces <= 0) {
usb_chip[chip->index] = NULL;
mutex_unlock(®ister_mutex);
snd_card_free_when_closed(card);
cval->res = 1;
cval->initialized = 1;
- if (desc->bDescriptorSubtype == UAC2_CLOCK_SELECTOR)
- cval->control = UAC2_CX_CLOCK_SELECTOR;
- else
+ if (state->mixer->protocol == UAC_VERSION_1)
cval->control = 0;
+ else /* UAC_VERSION_2 */
+ cval->control = (desc->bDescriptorSubtype == UAC2_CLOCK_SELECTOR) ?
+ UAC2_CX_CLOCK_SELECTOR : UAC2_SU_SELECTOR;
namelist = kmalloc(sizeof(char *) * desc->bNrInPins, GFP_KERNEL);
if (!namelist) {
if (mixer->chip->shutdown)
ret = -ENODEV;
else
- ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), bRequest,
+ ret = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), bRequest,
USB_TYPE_VENDOR | USB_RECIP_DEVICE | USB_DIR_IN,
0, wIndex,
- &tmp, sizeof(tmp), 1000);
+ &tmp, sizeof(tmp));
up_read(&mixer->chip->shutdown_rwsem);
if (ret < 0) {
return changed;
}
+static void kctl_private_value_free(struct snd_kcontrol *kctl)
+{
+ kfree((void *)kctl->private_value);
+}
+
static int snd_ftu_create_effect_switch(struct usb_mixer_interface *mixer,
int validx, int bUnitID)
{
return -ENOMEM;
}
+ kctl->private_free = kctl_private_value_free;
err = snd_ctl_add(mixer->chip->card, kctl);
if (err < 0)
return err;
}
}
},
+{
+ USB_DEVICE(0x0499, 0x1509),
+ .driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
+ /* .vendor_name = "Yamaha", */
+ /* .product_name = "Steinberg UR22", */
+ .ifnum = QUIRK_ANY_INTERFACE,
+ .type = QUIRK_COMPOSITE,
+ .data = (const struct snd_usb_audio_quirk[]) {
+ {
+ .ifnum = 1,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ {
+ .ifnum = 2,
+ .type = QUIRK_AUDIO_STANDARD_INTERFACE
+ },
+ {
+ .ifnum = 3,
+ .type = QUIRK_MIDI_YAMAHA
+ },
+ {
+ .ifnum = 4,
+ .type = QUIRK_IGNORE_INTERFACE
+ },
+ {
+ .ifnum = -1
+ }
+ }
+ }
+},
{
USB_DEVICE(0x0499, 0x150a),
.driver_info = (unsigned long) & (const struct snd_usb_audio_quirk) {
if ((le16_to_cpu(dev->descriptor.idVendor) == 0x23ba) &&
(requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS)
mdelay(20);
+
+ /* Marantz/Denon devices with USB DAC functionality need a delay
+ * after each class compliant request
+ */
+ if ((le16_to_cpu(dev->descriptor.idVendor) == 0x154e) &&
+ (requesttype & USB_TYPE_MASK) == USB_TYPE_CLASS) {
+
+ switch (le16_to_cpu(dev->descriptor.idProduct)) {
+ case 0x3005: /* Marantz HD-DAC1 */
+ case 0x3006: /* Marantz SA-14S1 */
+ mdelay(20);
+ break;
+ }
+ }
}
/*
/* iFi Audio micro/nano iDSD */
case USB_ID(0x20b1, 0x3008):
if (fp->altsetting == 2)
- return SNDRV_PCM_FMTBIT_DSD_U32_LE;
+ return SNDRV_PCM_FMTBIT_DSD_U32_BE;
break;
/* DIYINHK DSD DXD 384kHz USB to I2S/DSD */
case USB_ID(0x20b1, 0x2009):
if (fp->altsetting == 3)
- return SNDRV_PCM_FMTBIT_DSD_U32_LE;
+ return SNDRV_PCM_FMTBIT_DSD_U32_BE;
break;
default:
break;
#define MOVE_MEDIUM 0xa5
#define EXCHANGE_MEDIUM 0xa6
#define READ_12 0xa8
+#define SERVICE_ACTION_OUT_12 0xa9
#define WRITE_12 0xaa
-#define READ_MEDIA_SERIAL_NUMBER 0xab
+#define SERVICE_ACTION_IN_12 0xab
#define WRITE_VERIFY_12 0xae
#define VERIFY_12 0xaf
#define SEARCH_HIGH_12 0xb0
#define VERIFY_16 0x8f
#define SYNCHRONIZE_CACHE_16 0x91
#define WRITE_SAME_16 0x93
-#define SERVICE_ACTION_IN 0x9e
+#define SERVICE_ACTION_BIDIRECTIONAL 0x9d
+#define SERVICE_ACTION_IN_16 0x9e
+#define SERVICE_ACTION_OUT_16 0x9f
/* values for service action in */
#define SAI_READ_CAPACITY_16 0x10
#define SAI_GET_LBA_STATUS 0x12
return scsi_trace_rw16(p, cdb, len);
case UNMAP:
return scsi_trace_unmap(p, cdb, len);
- case SERVICE_ACTION_IN:
+ case SERVICE_ACTION_IN_16:
return scsi_trace_service_action_in(p, cdb, len);
case VARIABLE_LENGTH_CMD:
return scsi_trace_varlen(p, cdb, len);
PERF-GUI-VARS
PERF-VERSION-FILE
perf
+perf-read-vdso32
+perf-read-vdsox32
perf-help
perf-record
perf-report
After starting the program, wait msecs before measuring. This is useful to
filter out the startup phase of the program, which is often very different.
+-I::
+--intr-regs::
+Capture machine state (registers) at interrupt, i.e., on counter overflows for
+each sample. List of captured registers depends on the architecture. This option
+is off by default.
+
SEE ALSO
--------
linkperf:perf-stat[1], linkperf:perf-list[1]
--dump-raw-trace::
Dump raw trace in ASCII.
--g [type,min[,limit],order[,key]]::
+-g [type,min[,limit],order[,key][,branch]]::
--call-graph::
Display call chains using type, min percent threshold, optional print
limit and order.
- function: compare on functions
- address: compare on individual code addresses
+ branch can be:
+ - branch: include last branch information in callgraph
+ when available. Usually more convenient to use --branch-history
+ for this.
+
Default: fractal,0.5,callee,function.
--children::
branch stacks and it will automatically switch to the branch view mode,
unless --no-branch-stack is used.
+--branch-history::
+ Add the addresses of sampled taken branches to the callstack.
+ This allows to examine the path the program took to each sample.
+ The data collection must have used -b (or -j) and -g.
+
--objdump=<path>::
Path to objdump binary.
#
# Define NO_LIBDW_DWARF_UNWIND if you do not want libdw support
# for dwarf backtrace post unwind.
+#
+# Define NO_PERF_READ_VDSO32 if you do not want to build perf-read-vdso32
+# for reading the 32-bit compatibility VDSO in 64-bit mode
+#
+# Define NO_PERF_READ_VDSOX32 if you do not want to build perf-read-vdsox32
+# for reading the x32 mode 32-bit compatibility VDSO in 64-bit mode
+#
+# Define NO_ZLIB if you do not want to support compressed kernel modules
+
ifeq ($(srctree),)
srctree := $(patsubst %/,%,$(dir $(shell pwd)))
SCRIPTS = $(patsubst %.sh,%,$(SCRIPT_SH))
-#
-# Single 'perf' binary right now:
-#
PROGRAMS += $(OUTPUT)perf
+ifndef NO_PERF_READ_VDSO32
+PROGRAMS += $(OUTPUT)perf-read-vdso32
+endif
+
+ifndef NO_PERF_READ_VDSOX32
+PROGRAMS += $(OUTPUT)perf-read-vdsox32
+endif
+
# what 'all' will build and 'install' will install, in perfexecdir
ALL_PROGRAMS = $(PROGRAMS) $(SCRIPTS)
LIB_H += util/cache.h
LIB_H += util/callchain.h
LIB_H += util/build-id.h
+LIB_H += util/db-export.h
LIB_H += util/debug.h
LIB_H += util/pmu.h
LIB_H += util/event.h
LIB_H += util/evsel.h
LIB_H += util/evlist.h
LIB_H += util/exec_cmd.h
+LIB_H += util/find-vdso-map.c
LIB_H += util/levenshtein.h
LIB_H += util/machine.h
LIB_H += util/map.h
LIB_H += ui/ui.h
LIB_H += util/data.h
LIB_H += util/kvm-stat.h
+LIB_H += util/thread-stack.h
LIB_OBJS += $(OUTPUT)util/abspath.o
LIB_OBJS += $(OUTPUT)util/alias.o
LIB_OBJS += $(OUTPUT)util/build-id.o
LIB_OBJS += $(OUTPUT)util/config.o
LIB_OBJS += $(OUTPUT)util/ctype.o
+LIB_OBJS += $(OUTPUT)util/db-export.o
LIB_OBJS += $(OUTPUT)util/pmu.o
LIB_OBJS += $(OUTPUT)util/environment.o
LIB_OBJS += $(OUTPUT)util/event.o
LIB_OBJS += $(OUTPUT)util/data.o
LIB_OBJS += $(OUTPUT)util/tsc.o
LIB_OBJS += $(OUTPUT)util/cloexec.o
+LIB_OBJS += $(OUTPUT)util/thread-stack.o
LIB_OBJS += $(OUTPUT)ui/setup.o
LIB_OBJS += $(OUTPUT)ui/helpline.o
endif
ifdef NO_LIBELF
-EXTLIBS := $(filter-out -lelf,$(EXTLIBS))
-
# Remove ELF/DWARF dependent codes
LIB_OBJS := $(filter-out $(OUTPUT)util/symbol-elf.o,$(LIB_OBJS))
LIB_OBJS := $(filter-out $(OUTPUT)util/dwarf-aux.o,$(LIB_OBJS))
BUILTIN_OBJS += $(OUTPUT)bench/numa.o
endif
+ifndef NO_ZLIB
+ LIB_OBJS += $(OUTPUT)util/zlib.o
+endif
+
ifdef ASCIIDOC8
export ASCIIDOC8
endif
$(OUTPUT)perf-%: %.o $(PERFLIBS)
$(QUIET_LINK)$(CC) $(CFLAGS) -o $@ $(LDFLAGS) $(filter %.o,$^) $(LIBS)
+ifndef NO_PERF_READ_VDSO32
+$(OUTPUT)perf-read-vdso32: perf-read-vdso.c util/find-vdso-map.c
+ $(QUIET_CC)$(CC) -m32 $(filter -static,$(LDFLAGS)) -Wall -Werror -o $@ perf-read-vdso.c
+endif
+
+ifndef NO_PERF_READ_VDSOX32
+$(OUTPUT)perf-read-vdsox32: perf-read-vdso.c util/find-vdso-map.c
+ $(QUIET_CC)$(CC) -mx32 $(filter -static,$(LDFLAGS)) -Wall -Werror -o $@ perf-read-vdso.c
+endif
+
$(LIB_OBJS) $(BUILTIN_OBJS): $(LIB_H)
$(patsubst perf-%,%.o,$(PROGRAMS)): $(LIB_H) $(wildcard */*.h)
$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(bindir_SQ)'; \
$(INSTALL) $(OUTPUT)perf '$(DESTDIR_SQ)$(bindir_SQ)'; \
$(LN) '$(DESTDIR_SQ)$(bindir_SQ)/perf' '$(DESTDIR_SQ)$(bindir_SQ)/trace'
+ifndef NO_PERF_READ_VDSO32
+ $(call QUIET_INSTALL, perf-read-vdso32) \
+ $(INSTALL) $(OUTPUT)perf-read-vdso32 '$(DESTDIR_SQ)$(bindir_SQ)';
+endif
+ifndef NO_PERF_READ_VDSOX32
+ $(call QUIET_INSTALL, perf-read-vdsox32) \
+ $(INSTALL) $(OUTPUT)perf-read-vdsox32 '$(DESTDIR_SQ)$(bindir_SQ)';
+endif
$(call QUIET_INSTALL, libexec) \
$(INSTALL) -d -m 755 '$(DESTDIR_SQ)$(perfexec_instdir_SQ)'
$(call QUIET_INSTALL, perf-archive) \
clean: $(LIBTRACEEVENT)-clean $(LIBAPIKFS)-clean config-clean
$(call QUIET_CLEAN, core-objs) $(RM) $(LIB_OBJS) $(BUILTIN_OBJS) $(LIB_FILE) $(OUTPUT)perf-archive $(OUTPUT)perf-with-kcore $(OUTPUT)perf.o $(LANG_BINDINGS) $(GTK_OBJS)
- $(call QUIET_CLEAN, core-progs) $(RM) $(ALL_PROGRAMS) perf
+ $(call QUIET_CLEAN, core-progs) $(RM) $(ALL_PROGRAMS) perf perf-read-vdso32 perf-read-vdsox32
$(call QUIET_CLEAN, core-gen) $(RM) *.spec *.pyc *.pyo */*.pyc */*.pyo $(OUTPUT)common-cmds.h TAGS tags cscope* $(OUTPUT)PERF-VERSION-FILE $(OUTPUT)PERF-CFLAGS $(OUTPUT)PERF-FEATURES $(OUTPUT)util/*-bison* $(OUTPUT)util/*-flex*
$(QUIET_SUBDIR0)Documentation $(QUIET_SUBDIR1) clean
$(python-clean)
* yet used)
* -1 in case of errors
*/
-static int check_return_addr(const char *exec_file, Dwarf_Addr pc)
+static int check_return_addr(struct dso *dso, Dwarf_Addr pc)
{
int rc = -1;
Dwfl *dwfl;
Dwarf_Addr end = pc;
bool signalp;
- dwfl = dwfl_begin(&offline_callbacks);
- if (!dwfl) {
- pr_debug("dwfl_begin() failed: %s\n", dwarf_errmsg(-1));
- return -1;
- }
+ dwfl = dso->dwfl;
- if (dwfl_report_offline(dwfl, "", exec_file, -1) == NULL) {
- pr_debug("dwfl_report_offline() failed %s\n", dwarf_errmsg(-1));
- goto out;
+ if (!dwfl) {
+ dwfl = dwfl_begin(&offline_callbacks);
+ if (!dwfl) {
+ pr_debug("dwfl_begin() failed: %s\n", dwarf_errmsg(-1));
+ return -1;
+ }
+
+ if (dwfl_report_offline(dwfl, "", dso->long_name, -1) == NULL) {
+ pr_debug("dwfl_report_offline() failed %s\n",
+ dwarf_errmsg(-1));
+ /*
+ * We normally cache the DWARF debug info and never
+ * call dwfl_end(). But to prevent fd leak, free in
+ * case of error.
+ */
+ dwfl_end(dwfl);
+ goto out;
+ }
+ dso->dwfl = dwfl;
}
mod = dwfl_addrmodule(dwfl, pc);
rc = check_return_reg(ra_regno, frame);
out:
- dwfl_end(dwfl);
return rc;
}
* index: of callchain entry that needs to be ignored (if any)
* -1 if no entry needs to be ignored or in case of errors
*/
-int arch_skip_callchain_idx(struct machine *machine, struct thread *thread,
- struct ip_callchain *chain)
+int arch_skip_callchain_idx(struct thread *thread, struct ip_callchain *chain)
{
struct addr_location al;
struct dso *dso = NULL;
ip = chain->ips[2];
- thread__find_addr_location(thread, machine, PERF_RECORD_MISC_USER,
+ thread__find_addr_location(thread, PERF_RECORD_MISC_USER,
MAP__FUNCTION, ip, &al);
if (al.map)
return skip_slot;
}
- rc = check_return_addr(dso->long_name, ip);
+ rc = check_return_addr(dso, ip);
pr_debug("DSO %s, nr %" PRIx64 ", ip 0x%" PRIx64 "rc %d\n",
dso->long_name, chain->nr, ip, rc);
static struct perf_tool tool = {
.sample = diff__process_sample_event,
.mmap = perf_event__process_mmap,
+ .mmap2 = perf_event__process_mmap2,
.comm = perf_event__process_comm,
.exit = perf_event__process_exit,
.fork = perf_event__process_fork,
int cmd_diff(int argc, const char **argv, const char *prefix __maybe_unused)
{
+ int ret = hists__init();
+
+ if (ret < 0)
+ return ret;
+
perf_config(perf_default_config, NULL);
argc = parse_options(argc, argv, options, diff_usage, 0);
goto repipe;
}
- thread__find_addr_map(thread, machine, cpumode, MAP__FUNCTION,
- sample->ip, &al);
+ thread__find_addr_map(thread, cpumode, MAP__FUNCTION, sample->ip, &al);
if (al.map != NULL) {
if (!al.map->dso->hit) {
.tracing_data = perf_event__repipe_op2_synth,
.finished_round = perf_event__repipe_op2_synth,
.build_id = perf_event__repipe_op2_synth,
+ .id_index = perf_event__repipe_op2_synth,
},
.input_name = "-",
.samples = LIST_HEAD_INIT(inject.samples),
"-m", "1024",
"-c", "1",
};
+ const char * const kvm_stat_record_usage[] = {
+ "perf kvm stat record [<options>]",
+ NULL
+ };
const char * const *events_tp;
events_tp_size = 0;
for (j = 1; j < (unsigned int)argc; j++, i++)
rec_argv[i] = argv[j];
+ set_option_flag(record_options, 'e', "event", PARSE_OPT_HIDDEN);
+ set_option_flag(record_options, 0, "filter", PARSE_OPT_HIDDEN);
+ set_option_flag(record_options, 'R', "raw-samples", PARSE_OPT_HIDDEN);
+
+ set_option_flag(record_options, 'F', "freq", PARSE_OPT_DISABLED);
+ set_option_flag(record_options, 0, "group", PARSE_OPT_DISABLED);
+ set_option_flag(record_options, 'g', NULL, PARSE_OPT_DISABLED);
+ set_option_flag(record_options, 0, "call-graph", PARSE_OPT_DISABLED);
+ set_option_flag(record_options, 'd', "data", PARSE_OPT_DISABLED);
+ set_option_flag(record_options, 'T', "timestamp", PARSE_OPT_DISABLED);
+ set_option_flag(record_options, 'P', "period", PARSE_OPT_DISABLED);
+ set_option_flag(record_options, 'n', "no-samples", PARSE_OPT_DISABLED);
+ set_option_flag(record_options, 'N', "no-buildid-cache", PARSE_OPT_DISABLED);
+ set_option_flag(record_options, 'B', "no-buildid", PARSE_OPT_DISABLED);
+ set_option_flag(record_options, 'G', "cgroup", PARSE_OPT_DISABLED);
+ set_option_flag(record_options, 'b', "branch-any", PARSE_OPT_DISABLED);
+ set_option_flag(record_options, 'j', "branch-filter", PARSE_OPT_DISABLED);
+ set_option_flag(record_options, 'W', "weight", PARSE_OPT_DISABLED);
+ set_option_flag(record_options, 0, "transaction", PARSE_OPT_DISABLED);
+
+ record_usage = kvm_stat_record_usage;
return cmd_record(i, rec_argv, NULL);
}
bool show_funcs;
bool mod_events;
bool uprobes;
+ bool quiet;
int nevents;
struct perf_probe_event events[MAX_PROBES];
struct strlist *dellist;
#endif
NULL
};
- const struct option options[] = {
+ struct option options[] = {
OPT_INCR('v', "verbose", &verbose,
"be more verbose (show parsed arguments, etc)"),
+ OPT_BOOLEAN('q', "quiet", ¶ms.quiet,
+ "be quiet (do not show any mesages)"),
OPT_BOOLEAN('l', "list", ¶ms.list_events,
"list up current probe events"),
OPT_CALLBACK('d', "del", NULL, "[GROUP:]EVENT", "delete a probe event.",
OPT_CALLBACK('x', "exec", NULL, "executable|path",
"target executable name or path", opt_set_target),
OPT_BOOLEAN(0, "demangle", &symbol_conf.demangle,
- "Disable symbol demangling"),
+ "Enable symbol demangling"),
OPT_BOOLEAN(0, "demangle-kernel", &symbol_conf.demangle_kernel,
"Enable kernel symbol demangling"),
OPT_END()
};
int ret;
+ set_option_flag(options, 'a', "add", PARSE_OPT_EXCLUSIVE);
+ set_option_flag(options, 'd', "del", PARSE_OPT_EXCLUSIVE);
+ set_option_flag(options, 'l', "list", PARSE_OPT_EXCLUSIVE);
+#ifdef HAVE_DWARF_SUPPORT
+ set_option_flag(options, 'L', "line", PARSE_OPT_EXCLUSIVE);
+ set_option_flag(options, 'V', "vars", PARSE_OPT_EXCLUSIVE);
+#endif
+
argc = parse_options(argc, argv, options, probe_usage,
PARSE_OPT_STOP_AT_NON_OPTION);
if (argc > 0) {
}
}
+ if (params.quiet) {
+ if (verbose != 0) {
+ pr_err(" Error: -v and -q are exclusive.\n");
+ return -EINVAL;
+ }
+ verbose = -1;
+ }
+
if (params.max_probe_points == 0)
params.max_probe_points = MAX_PROBES;
symbol_conf.try_vmlinux_path = (symbol_conf.vmlinux_name == NULL);
if (params.list_events) {
- if (params.mod_events) {
- pr_err(" Error: Don't use --list with --add/--del.\n");
- usage_with_options(probe_usage, options);
- }
- if (params.show_lines) {
- pr_err(" Error: Don't use --list with --line.\n");
- usage_with_options(probe_usage, options);
- }
- if (params.show_vars) {
- pr_err(" Error: Don't use --list with --vars.\n");
- usage_with_options(probe_usage, options);
- }
- if (params.show_funcs) {
- pr_err(" Error: Don't use --list with --funcs.\n");
- usage_with_options(probe_usage, options);
- }
if (params.uprobes) {
pr_warning(" Error: Don't use --list with --exec.\n");
usage_with_options(probe_usage, options);
return ret;
}
if (params.show_funcs) {
- if (params.nevents != 0 || params.dellist) {
- pr_err(" Error: Don't use --funcs with"
- " --add/--del.\n");
- usage_with_options(probe_usage, options);
- }
- if (params.show_lines) {
- pr_err(" Error: Don't use --funcs with --line.\n");
- usage_with_options(probe_usage, options);
- }
- if (params.show_vars) {
- pr_err(" Error: Don't use --funcs with --vars.\n");
- usage_with_options(probe_usage, options);
- }
if (!params.filter)
params.filter = strfilter__new(DEFAULT_FUNC_FILTER,
NULL);
#ifdef HAVE_DWARF_SUPPORT
if (params.show_lines) {
- if (params.mod_events) {
- pr_err(" Error: Don't use --line with"
- " --add/--del.\n");
- usage_with_options(probe_usage, options);
- }
- if (params.show_vars) {
- pr_err(" Error: Don't use --line with --vars.\n");
- usage_with_options(probe_usage, options);
- }
-
ret = show_line_range(¶ms.line_range, params.target,
params.uprobes);
if (ret < 0)
return ret;
}
if (params.show_vars) {
- if (params.mod_events) {
- pr_err(" Error: Don't use --vars with"
- " --add/--del.\n");
- usage_with_options(probe_usage, options);
- }
if (!params.filter)
params.filter = strfilter__new(DEFAULT_VAR_FILTER,
NULL);
if (size == 0)
return 0;
+ /*
+ * During this process, it'll load kernel map and replace the
+ * dso->long_name to a real pathname it found. In this case
+ * we prefer the vmlinux path like
+ * /lib/modules/3.16.4/build/vmlinux
+ *
+ * rather than build-id path (in debug directory).
+ * $HOME/.debug/.build-id/f0/6e17aa50adf4d00b88925e03775de107611551
+ */
+ symbol_conf.ignore_vmlinux_buildid = true;
+
return __perf_session__process_events(session, start,
size - start,
size, &build_id__mark_dso_hit_ops);
return perf_default_config(var, value, cb);
}
-static const char * const record_usage[] = {
+static const char * const __record_usage[] = {
"perf record [<options>] [<command>]",
"perf record [<options>] -- <command> [<options>]",
NULL
};
+const char * const *record_usage = __record_usage;
/*
* XXX Ideally would be local to cmd_record() and passed to a record__new
* perf_evlist__prepare_workload, etc instead of fork+exec'in 'perf record',
* using pipes, etc.
*/
-const struct option record_options[] = {
+struct option __record_options[] = {
OPT_CALLBACK('e', "event", &record.evlist, "event",
"event selector. use 'perf list' to list available events",
parse_events_option),
"sample transaction flags (special events only)"),
OPT_BOOLEAN(0, "per-thread", &record.opts.target.per_thread,
"use per-thread mmaps"),
+ OPT_BOOLEAN('I', "intr-regs", &record.opts.sample_intr_regs,
+ "Sample machine registers on interrupt"),
OPT_END()
};
+struct option *record_options = __record_options;
+
int cmd_record(int argc, const char **argv, const char *prefix __maybe_unused)
{
int err = -ENOMEM;
return -EINVAL;
}
if (symbol_conf.use_callchain) {
- ui__error("Selected -g but no callchain data. Did "
- "you call 'perf record' without -g?\n");
+ ui__error("Selected -g or --branch-history but no "
+ "callchain data. Did\n"
+ "you call 'perf record' without -g?\n");
return -1;
}
} else if (!rep->dont_use_callchains &&
struct stat st;
bool has_br_stack = false;
int branch_mode = -1;
+ bool branch_call_mode = false;
char callchain_default_opt[] = "fractal,0.5,callee";
const char * const report_usage[] = {
"perf report [<options>]",
"regex filter to identify parent, see: '--sort parent'"),
OPT_BOOLEAN('x', "exclude-other", &symbol_conf.exclude_other,
"Only display entries with parent-match"),
- OPT_CALLBACK_DEFAULT('g', "call-graph", &report, "output_type,min_percent[,print_limit],call_order",
- "Display callchains using output_type (graph, flat, fractal, or none) , min percent threshold, optional print limit, callchain order, key (function or address). "
+ OPT_CALLBACK_DEFAULT('g', "call-graph", &report, "output_type,min_percent[,print_limit],call_order[,branch]",
+ "Display callchains using output_type (graph, flat, fractal, or none) , min percent threshold, optional print limit, callchain order, key (function or address), add branches. "
"Default: fractal,0.5,callee,function", &report_parse_callchain_opt, callchain_default_opt),
OPT_BOOLEAN(0, "children", &symbol_conf.cumulate_callchain,
"Accumulate callchains of children and show total overhead as well"),
OPT_BOOLEAN(0, "group", &symbol_conf.event_group,
"Show event group information together"),
OPT_CALLBACK_NOOPT('b', "branch-stack", &branch_mode, "",
- "use branch records for histogram filling", parse_branch_mode),
+ "use branch records for per branch histogram filling",
+ parse_branch_mode),
+ OPT_BOOLEAN(0, "branch-history", &branch_call_mode,
+ "add last branch records to call history"),
OPT_STRING(0, "objdump", &objdump_path, "path",
"objdump binary to use for disassembly and annotations"),
OPT_BOOLEAN(0, "demangle", &symbol_conf.demangle,
has_br_stack = perf_header__has_feat(&session->header,
HEADER_BRANCH_STACK);
- if ((branch_mode == -1 && has_br_stack) || branch_mode == 1) {
+ /*
+ * Branch mode is a tristate:
+ * -1 means default, so decide based on the file having branch data.
+ * 0/1 means the user chose a mode.
+ */
+ if (((branch_mode == -1 && has_br_stack) || branch_mode == 1) &&
+ branch_call_mode == -1) {
sort__mode = SORT_MODE__BRANCH;
symbol_conf.cumulate_callchain = false;
}
+ if (branch_call_mode) {
+ callchain_param.key = CCKEY_ADDRESS;
+ callchain_param.branch_callstack = 1;
+ symbol_conf.use_callchain = true;
+ callchain_register_param(&callchain_param);
+ if (sort_order == NULL)
+ sort_order = "srcline,symbol,dso";
+ }
if (report.mem_mode) {
if (sort__mode == SORT_MODE__BRANCH) {
static bool debug_mode;
static u64 last_timestamp;
static u64 nr_unordered;
-extern const struct option record_options[];
static bool no_callchain;
static bool latency_format;
static bool system_wide;
static void print_sample_addr(union perf_event *event,
struct perf_sample *sample,
- struct machine *machine,
struct thread *thread,
struct perf_event_attr *attr)
{
if (!sample_addr_correlates_sym(attr))
return;
- perf_event__preprocess_sample_addr(event, sample, machine, thread, &al);
+ perf_event__preprocess_sample_addr(event, sample, thread, &al);
if (PRINT_FIELD(SYM)) {
printf(" ");
((evsel->attr.sample_type & PERF_SAMPLE_ADDR) &&
!output[attr->type].user_set)) {
printf(" => ");
- print_sample_addr(event, sample, al->machine, thread, attr);
+ print_sample_addr(event, sample, thread, attr);
}
if (print_srcline_last)
event_format__print(evsel->tp_format, sample->cpu,
sample->raw_data, sample->raw_size);
if (PRINT_FIELD(ADDR))
- print_sample_addr(event, sample, al->machine, thread, attr);
+ print_sample_addr(event, sample, thread, attr);
if (PRINT_FIELD(IP)) {
if (!symbol_conf.use_callchain)
update_stats(&runtime_itlb_cache_stats[0], count[0]);
}
+static void zero_per_pkg(struct perf_evsel *counter)
+{
+ if (counter->per_pkg_mask)
+ memset(counter->per_pkg_mask, 0, MAX_NR_CPUS);
+}
+
+static int check_per_pkg(struct perf_evsel *counter, int cpu, bool *skip)
+{
+ unsigned long *mask = counter->per_pkg_mask;
+ struct cpu_map *cpus = perf_evsel__cpus(counter);
+ int s;
+
+ *skip = false;
+
+ if (!counter->per_pkg)
+ return 0;
+
+ if (cpu_map__empty(cpus))
+ return 0;
+
+ if (!mask) {
+ mask = zalloc(MAX_NR_CPUS);
+ if (!mask)
+ return -ENOMEM;
+
+ counter->per_pkg_mask = mask;
+ }
+
+ s = cpu_map__get_socket(cpus, cpu);
+ if (s < 0)
+ return -1;
+
+ *skip = test_and_set_bit(s, mask) == 1;
+ return 0;
+}
+
+static int read_cb(struct perf_evsel *evsel, int cpu, int thread __maybe_unused,
+ struct perf_counts_values *count)
+{
+ struct perf_counts_values *aggr = &evsel->counts->aggr;
+ static struct perf_counts_values zero;
+ bool skip = false;
+
+ if (check_per_pkg(evsel, cpu, &skip)) {
+ pr_err("failed to read per-pkg counter\n");
+ return -1;
+ }
+
+ if (skip)
+ count = &zero;
+
+ switch (aggr_mode) {
+ case AGGR_CORE:
+ case AGGR_SOCKET:
+ case AGGR_NONE:
+ if (!evsel->snapshot)
+ perf_evsel__compute_deltas(evsel, cpu, count);
+ perf_counts_values__scale(count, scale, NULL);
+ evsel->counts->cpu[cpu] = *count;
+ update_shadow_stats(evsel, count->values);
+ break;
+ case AGGR_GLOBAL:
+ aggr->val += count->val;
+ if (scale) {
+ aggr->ena += count->ena;
+ aggr->run += count->run;
+ }
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int read_counter(struct perf_evsel *counter);
+
/*
* Read out the results of a single counter:
* aggregate counts across CPUs in system-wide mode
*/
static int read_counter_aggr(struct perf_evsel *counter)
{
+ struct perf_counts_values *aggr = &counter->counts->aggr;
struct perf_stat *ps = counter->priv;
u64 *count = counter->counts->aggr.values;
int i;
- if (__perf_evsel__read(counter, perf_evsel__nr_cpus(counter),
- thread_map__nr(evsel_list->threads), scale) < 0)
+ aggr->val = aggr->ena = aggr->run = 0;
+
+ if (read_counter(counter))
return -1;
+ if (!counter->snapshot)
+ perf_evsel__compute_deltas(counter, -1, aggr);
+ perf_counts_values__scale(aggr, scale, &counter->counts->scaled);
+
for (i = 0; i < 3; i++)
update_stats(&ps->res_stats[i], count[i]);
*/
static int read_counter(struct perf_evsel *counter)
{
- u64 *count;
- int cpu;
+ int nthreads = thread_map__nr(evsel_list->threads);
+ int ncpus = perf_evsel__nr_cpus(counter);
+ int cpu, thread;
- for (cpu = 0; cpu < perf_evsel__nr_cpus(counter); cpu++) {
- if (__perf_evsel__read_on_cpu(counter, cpu, 0, scale) < 0)
- return -1;
+ if (counter->system_wide)
+ nthreads = 1;
- count = counter->counts->cpu[cpu].values;
+ if (counter->per_pkg)
+ zero_per_pkg(counter);
- update_shadow_stats(counter, count);
+ for (thread = 0; thread < nthreads; thread++) {
+ for (cpu = 0; cpu < ncpus; cpu++) {
+ if (perf_evsel__read_cb(counter, cpu, thread, read_cb))
+ return -1;
+ }
}
return 0;
}
tal.filtered = 0;
- thread__find_addr_location(al.thread, machine, cpumode,
+ thread__find_addr_location(al.thread, cpumode,
MAP__FUNCTION, ip, &tal);
if (tal.sym)
NULL
};
- const struct option record_options[] = {
+ const struct option timechart_record_options[] = {
OPT_BOOLEAN('P', "power-only", &tchart.power_only, "output power data only"),
OPT_BOOLEAN('T', "tasks-only", &tchart.tasks_only,
"output processes data only"),
OPT_BOOLEAN('g', "callchain", &tchart.with_backtrace, "record callchain"),
OPT_END()
};
- const char * const record_usage[] = {
+ const char * const timechart_record_usage[] = {
"perf timechart record [<options>]",
NULL
};
}
if (argc && !strncmp(argv[0], "rec", 3)) {
- argc = parse_options(argc, argv, record_options, record_usage,
+ argc = parse_options(argc, argv, timechart_record_options,
+ timechart_record_usage,
PARSE_OPT_STOP_AT_NON_OPTION);
if (tchart.power_only && tchart.tasks_only) {
if (trace->summary_only)
return 0;
- thread__find_addr_location(thread, trace->host, cpumode, MAP__FUNCTION,
+ thread__find_addr_location(thread, cpumode, MAP__FUNCTION,
sample->ip, &al);
trace__fprintf_entry_head(trace, thread, 0, sample->time, trace->output);
fprintf(trace->output, "] => ");
- thread__find_addr_location(thread, trace->host, cpumode, MAP__VARIABLE,
+ thread__find_addr_location(thread, cpumode, MAP__VARIABLE,
sample->addr, &al);
if (!al.map) {
- thread__find_addr_location(thread, trace->host, cpumode,
+ thread__find_addr_location(thread, cpumode,
MAP__FUNCTION, sample->addr, &al);
if (al.map)
# adding assembler files missing the .GNU-stack linker note.
LDFLAGS += -Wl,-z,noexecstack
-EXTLIBS = -lelf -lpthread -lrt -lm -ldl
+EXTLIBS = -lpthread -lrt -lm -ldl
ifneq ($(OUTPUT),)
OUTPUT_FEATURES = $(OUTPUT)config/feature-checks/
libunwind \
stackprotector-all \
timerfd \
- libdw-dwarf-unwind
+ libdw-dwarf-unwind \
+ zlib
LIB_FEATURE_TESTS = \
dwarf \
libpython \
libslang \
libunwind \
- libdw-dwarf-unwind
+ libdw-dwarf-unwind \
+ zlib
VF_FEATURE_TESTS = \
backtrace \
bionic \
liberty \
liberty-z \
- cplus-demangle
+ cplus-demangle \
+ compile-32 \
+ compile-x32
# Set FEATURE_CHECK_(C|LD)FLAGS-all for all CORE_FEATURE_TESTS features.
# If in the future we need per-feature checks/flags for features not
ifndef NO_LIBELF
CFLAGS += -DHAVE_LIBELF_SUPPORT
+ EXTLIBS += -lelf
ifeq ($(feature-libelf-mmap), 1)
CFLAGS += -DHAVE_LIBELF_MMAP_SUPPORT
else
CFLAGS += -DHAVE_DWARF_SUPPORT $(LIBDW_CFLAGS)
LDFLAGS += $(LIBDW_LDFLAGS)
- EXTLIBS += -lelf -ldw
+ EXTLIBS += -ldw
endif # PERF_HAVE_DWARF_REGS
endif # NO_DWARF
endif # NO_LIBELF
CFLAGS += -DHAVE_LIBBFD_SUPPORT
endif
+ifndef NO_ZLIB
+ ifeq ($(feature-zlib), 1)
+ CFLAGS += -DHAVE_ZLIB_SUPPORT
+ EXTLIBS += -lz
+ else
+ NO_ZLIB := 1
+ endif
+endif
+
ifndef NO_BACKTRACE
ifeq ($(feature-backtrace), 1)
CFLAGS += -DHAVE_BACKTRACE_SUPPORT
CFLAGS += -DHAVE_KVM_STAT_SUPPORT
endif
+ifeq (${IS_64_BIT}, 1)
+ ifndef NO_PERF_READ_VDSO32
+ $(call feature_check,compile-32)
+ ifeq ($(feature-compile-32), 1)
+ CFLAGS += -DHAVE_PERF_READ_VDSO32
+ else
+ NO_PERF_READ_VDSO32 := 1
+ endif
+ endif
+ ifneq (${IS_X86_64}, 1)
+ NO_PERF_READ_VDSOX32 := 1
+ endif
+ ifndef NO_PERF_READ_VDSOX32
+ $(call feature_check,compile-x32)
+ ifeq ($(feature-compile-x32), 1)
+ CFLAGS += -DHAVE_PERF_READ_VDSOX32
+ else
+ NO_PERF_READ_VDSOX32 := 1
+ endif
+ endif
+else
+ NO_PERF_READ_VDSO32 := 1
+ NO_PERF_READ_VDSOX32 := 1
+endif
+
# Among the variables below, these:
# perfexecdir
# template_dir
RAW_ARCH := x86_64
endif
endif
+
+ifeq (${IS_X86_64}, 1)
+ IS_64_BIT := 1
+else ifeq ($(ARCH),x86)
+ IS_64_BIT := 0
+else
+ IS_64_BIT := $(shell echo __LP64__ | ${CC} ${CFLAGS} -E -x c - | tail -n 1)
+endif
test-libunwind-debug-frame.bin \
test-stackprotector-all.bin \
test-timerfd.bin \
- test-libdw-dwarf-unwind.bin
+ test-libdw-dwarf-unwind.bin \
+ test-compile-32.bin \
+ test-compile-x32.bin \
+ test-zlib.bin
CC := $(CROSS_COMPILE)gcc -MD
PKG_CONFIG := $(CROSS_COMPILE)pkg-config
###############################
test-all.bin:
- $(BUILD) -Werror -fstack-protector-all -O2 -Werror -D_FORTIFY_SOURCE=2 -ldw -lelf -lnuma -lelf -laudit -I/usr/include/slang -lslang $(shell $(PKG_CONFIG) --libs --cflags gtk+-2.0 2>/dev/null) $(FLAGS_PERL_EMBED) $(FLAGS_PYTHON_EMBED) -DPACKAGE='"perf"' -lbfd -ldl
+ $(BUILD) -Werror -fstack-protector-all -O2 -Werror -D_FORTIFY_SOURCE=2 -ldw -lelf -lnuma -lelf -laudit -I/usr/include/slang -lslang $(shell $(PKG_CONFIG) --libs --cflags gtk+-2.0 2>/dev/null) $(FLAGS_PERL_EMBED) $(FLAGS_PYTHON_EMBED) -DPACKAGE='"perf"' -lbfd -ldl -lz
test-hello.bin:
$(BUILD)
test-sync-compare-and-swap.bin:
$(BUILD) -Werror
+test-compile-32.bin:
+ $(CC) -m32 -o $(OUTPUT)$@ test-compile.c
+
+test-compile-x32.bin:
+ $(CC) -mx32 -o $(OUTPUT)$@ test-compile.c
+
+test-zlib.bin:
+ $(BUILD) -lz
+
-include *.d
###############################
# include "test-sync-compare-and-swap.c"
#undef main
+#define main main_test_zlib
+# include "test-zlib.c"
+#undef main
+
int main(int argc, char *argv[])
{
main_test_libpython();
main_test_stackprotector_all();
main_test_libdw_dwarf_unwind();
main_test_sync_compare_and_swap(argc, argv);
+ main_test_zlib();
return 0;
}
--- /dev/null
+int main(void)
+{
+ return 0;
+}
--- /dev/null
+#include <zlib.h>
+
+int main(void)
+{
+ z_stream zs;
+
+ inflateInit(&zs);
+ return 0;
+}
--- /dev/null
+#include <stdio.h>
+#include <string.h>
+
+#define VDSO__MAP_NAME "[vdso]"
+
+/*
+ * Include definition of find_vdso_map() also used in util/vdso.c for
+ * building perf.
+ */
+#include "util/find-vdso-map.c"
+
+int main(void)
+{
+ void *start, *end;
+ size_t size, written;
+
+ if (find_vdso_map(&start, &end))
+ return 1;
+
+ size = end - start;
+
+ while (size) {
+ written = fwrite(start, 1, size, stdout);
+ if (!written)
+ return 1;
+ start += written;
+ size -= written;
+ }
+
+ if (fflush(stdout))
+ return 1;
+
+ return 0;
+}
#define wmb() asm volatile("lock; addl $0,0(%%esp)" ::: "memory")
#define rmb() asm volatile("lock; addl $0,0(%%esp)" ::: "memory")
#define cpu_relax() asm volatile("rep; nop" ::: "memory");
-#define CPUINFO_PROC "model name"
+#define CPUINFO_PROC {"model name"}
#ifndef __NR_perf_event_open
# define __NR_perf_event_open 336
#endif
#define wmb() asm volatile("sfence" ::: "memory")
#define rmb() asm volatile("lfence" ::: "memory")
#define cpu_relax() asm volatile("rep; nop" ::: "memory");
-#define CPUINFO_PROC "model name"
+#define CPUINFO_PROC {"model name"}
#ifndef __NR_perf_event_open
# define __NR_perf_event_open 298
#endif
#define mb() asm volatile ("sync" ::: "memory")
#define wmb() asm volatile ("sync" ::: "memory")
#define rmb() asm volatile ("sync" ::: "memory")
-#define CPUINFO_PROC "cpu"
+#define CPUINFO_PROC {"cpu"}
#endif
#ifdef __s390__
#define mb() asm volatile("bcr 15,0" ::: "memory")
#define wmb() asm volatile("bcr 15,0" ::: "memory")
#define rmb() asm volatile("bcr 15,0" ::: "memory")
-#define CPUINFO_PROC "vendor_id"
+#define CPUINFO_PROC {"vendor_id"}
#endif
#ifdef __sh__
# define wmb() asm volatile("" ::: "memory")
# define rmb() asm volatile("" ::: "memory")
#endif
-#define CPUINFO_PROC "cpu type"
+#define CPUINFO_PROC {"cpu type"}
#endif
#ifdef __hppa__
#define mb() asm volatile("" ::: "memory")
#define wmb() asm volatile("" ::: "memory")
#define rmb() asm volatile("" ::: "memory")
-#define CPUINFO_PROC "cpu"
+#define CPUINFO_PROC {"cpu"}
#endif
#ifdef __sparc__
#endif
#define wmb() asm volatile("":::"memory")
#define rmb() asm volatile("":::"memory")
-#define CPUINFO_PROC "cpu"
+#define CPUINFO_PROC {"cpu"}
#endif
#ifdef __alpha__
#define mb() asm volatile("mb" ::: "memory")
#define wmb() asm volatile("wmb" ::: "memory")
#define rmb() asm volatile("mb" ::: "memory")
-#define CPUINFO_PROC "cpu model"
+#define CPUINFO_PROC {"cpu model"}
#endif
#ifdef __ia64__
#define wmb() asm volatile ("mf" ::: "memory")
#define rmb() asm volatile ("mf" ::: "memory")
#define cpu_relax() asm volatile ("hint @pause" ::: "memory")
-#define CPUINFO_PROC "model name"
+#define CPUINFO_PROC {"model name"}
#endif
#ifdef __arm__
#define mb() ((void(*)(void))0xffff0fa0)()
#define wmb() ((void(*)(void))0xffff0fa0)()
#define rmb() ((void(*)(void))0xffff0fa0)()
-#define CPUINFO_PROC "Processor"
+#define CPUINFO_PROC {"model name", "Processor"}
#endif
#ifdef __aarch64__
: "memory")
#define wmb() mb()
#define rmb() mb()
-#define CPUINFO_PROC "cpu model"
+#define CPUINFO_PROC {"cpu model"}
#endif
#ifdef __arc__
#define mb() asm volatile("" ::: "memory")
#define wmb() asm volatile("" ::: "memory")
#define rmb() asm volatile("" ::: "memory")
-#define CPUINFO_PROC "Processor"
+#define CPUINFO_PROC {"Processor"}
#endif
#ifdef __metag__
#define mb() asm volatile("" ::: "memory")
#define wmb() asm volatile("" ::: "memory")
#define rmb() asm volatile("" ::: "memory")
-#define CPUINFO_PROC "CPU"
+#define CPUINFO_PROC {"CPU"}
#endif
#ifdef __xtensa__
#define mb() asm volatile("memw" ::: "memory")
#define wmb() asm volatile("memw" ::: "memory")
#define rmb() asm volatile("" ::: "memory")
-#define CPUINFO_PROC "core ID"
+#define CPUINFO_PROC {"core ID"}
#endif
#ifdef __tile__
#define wmb() asm volatile ("mf" ::: "memory")
#define rmb() asm volatile ("mf" ::: "memory")
#define cpu_relax() asm volatile ("mfspr zero, PASS" ::: "memory")
-#define CPUINFO_PROC "model name"
+#define CPUINFO_PROC {"model name"}
#endif
#define barrier() asm volatile ("" ::: "memory")
bool sample_weight;
bool sample_time;
bool period;
+ bool sample_intr_regs;
unsigned int freq;
unsigned int mmap_pages;
unsigned int user_freq;
unsigned initial_delay;
};
+struct option;
+extern const char * const *record_usage;
+extern struct option *record_options;
#endif
--- /dev/null
+#!/bin/bash
+
+#
+# export perf data to a postgresql database. Can cover
+# perf ip samples (excluding the tracepoints). No special
+# record requirements, just record what you want to export.
+#
+perf record $@
--- /dev/null
+#!/bin/bash
+# description: export perf data to a postgresql database
+# args: [database name] [columns] [calls]
+n_args=0
+for i in "$@"
+do
+ if expr match "$i" "-" > /dev/null ; then
+ break
+ fi
+ n_args=$(( $n_args + 1 ))
+done
+if [ "$n_args" -gt 3 ] ; then
+ echo "usage: export-to-postgresql-report [database name] [columns] [calls]"
+ exit
+fi
+if [ "$n_args" -gt 2 ] ; then
+ dbname=$1
+ columns=$2
+ calls=$3
+ shift 3
+elif [ "$n_args" -gt 1 ] ; then
+ dbname=$1
+ columns=$2
+ shift 2
+elif [ "$n_args" -gt 0 ] ; then
+ dbname=$1
+ shift
+fi
+perf script $@ -s "$PERF_EXEC_PATH"/scripts/python/export-to-postgresql.py $dbname $columns $calls
--- /dev/null
+# export-to-postgresql.py: export perf data to a postgresql database
+# Copyright (c) 2014, Intel Corporation.
+#
+# This program is free software; you can redistribute it and/or modify it
+# under the terms and conditions of the GNU General Public License,
+# version 2, as published by the Free Software Foundation.
+#
+# This program is distributed in the hope it will be useful, but WITHOUT
+# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+# FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+# more details.
+
+import os
+import sys
+import struct
+import datetime
+
+from PySide.QtSql import *
+
+# Need to access PostgreSQL C library directly to use COPY FROM STDIN
+from ctypes import *
+libpq = CDLL("libpq.so.5")
+PQconnectdb = libpq.PQconnectdb
+PQconnectdb.restype = c_void_p
+PQfinish = libpq.PQfinish
+PQstatus = libpq.PQstatus
+PQexec = libpq.PQexec
+PQexec.restype = c_void_p
+PQresultStatus = libpq.PQresultStatus
+PQputCopyData = libpq.PQputCopyData
+PQputCopyData.argtypes = [ c_void_p, c_void_p, c_int ]
+PQputCopyEnd = libpq.PQputCopyEnd
+PQputCopyEnd.argtypes = [ c_void_p, c_void_p ]
+
+sys.path.append(os.environ['PERF_EXEC_PATH'] + \
+ '/scripts/python/Perf-Trace-Util/lib/Perf/Trace')
+
+# These perf imports are not used at present
+#from perf_trace_context import *
+#from Core import *
+
+perf_db_export_mode = True
+perf_db_export_calls = False
+
+def usage():
+ print >> sys.stderr, "Usage is: export-to-postgresql.py <database name> [<columns>] [<calls>]"
+ print >> sys.stderr, "where: columns 'all' or 'branches'"
+ print >> sys.stderr, " calls 'calls' => create calls table"
+ raise Exception("Too few arguments")
+
+if (len(sys.argv) < 2):
+ usage()
+
+dbname = sys.argv[1]
+
+if (len(sys.argv) >= 3):
+ columns = sys.argv[2]
+else:
+ columns = "all"
+
+if columns not in ("all", "branches"):
+ usage()
+
+branches = (columns == "branches")
+
+if (len(sys.argv) >= 4):
+ if (sys.argv[3] == "calls"):
+ perf_db_export_calls = True
+ else:
+ usage()
+
+output_dir_name = os.getcwd() + "/" + dbname + "-perf-data"
+os.mkdir(output_dir_name)
+
+def do_query(q, s):
+ if (q.exec_(s)):
+ return
+ raise Exception("Query failed: " + q.lastError().text())
+
+print datetime.datetime.today(), "Creating database..."
+
+db = QSqlDatabase.addDatabase('QPSQL')
+query = QSqlQuery(db)
+db.setDatabaseName('postgres')
+db.open()
+try:
+ do_query(query, 'CREATE DATABASE ' + dbname)
+except:
+ os.rmdir(output_dir_name)
+ raise
+query.finish()
+query.clear()
+db.close()
+
+db.setDatabaseName(dbname)
+db.open()
+
+query = QSqlQuery(db)
+do_query(query, 'SET client_min_messages TO WARNING')
+
+do_query(query, 'CREATE TABLE selected_events ('
+ 'id bigint NOT NULL,'
+ 'name varchar(80))')
+do_query(query, 'CREATE TABLE machines ('
+ 'id bigint NOT NULL,'
+ 'pid integer,'
+ 'root_dir varchar(4096))')
+do_query(query, 'CREATE TABLE threads ('
+ 'id bigint NOT NULL,'
+ 'machine_id bigint,'
+ 'process_id bigint,'
+ 'pid integer,'
+ 'tid integer)')
+do_query(query, 'CREATE TABLE comms ('
+ 'id bigint NOT NULL,'
+ 'comm varchar(16))')
+do_query(query, 'CREATE TABLE comm_threads ('
+ 'id bigint NOT NULL,'
+ 'comm_id bigint,'
+ 'thread_id bigint)')
+do_query(query, 'CREATE TABLE dsos ('
+ 'id bigint NOT NULL,'
+ 'machine_id bigint,'
+ 'short_name varchar(256),'
+ 'long_name varchar(4096),'
+ 'build_id varchar(64))')
+do_query(query, 'CREATE TABLE symbols ('
+ 'id bigint NOT NULL,'
+ 'dso_id bigint,'
+ 'sym_start bigint,'
+ 'sym_end bigint,'
+ 'binding integer,'
+ 'name varchar(2048))')
+do_query(query, 'CREATE TABLE branch_types ('
+ 'id integer NOT NULL,'
+ 'name varchar(80))')
+
+if branches:
+ do_query(query, 'CREATE TABLE samples ('
+ 'id bigint NOT NULL,'
+ 'evsel_id bigint,'
+ 'machine_id bigint,'
+ 'thread_id bigint,'
+ 'comm_id bigint,'
+ 'dso_id bigint,'
+ 'symbol_id bigint,'
+ 'sym_offset bigint,'
+ 'ip bigint,'
+ 'time bigint,'
+ 'cpu integer,'
+ 'to_dso_id bigint,'
+ 'to_symbol_id bigint,'
+ 'to_sym_offset bigint,'
+ 'to_ip bigint,'
+ 'branch_type integer,'
+ 'in_tx boolean)')
+else:
+ do_query(query, 'CREATE TABLE samples ('
+ 'id bigint NOT NULL,'
+ 'evsel_id bigint,'
+ 'machine_id bigint,'
+ 'thread_id bigint,'
+ 'comm_id bigint,'
+ 'dso_id bigint,'
+ 'symbol_id bigint,'
+ 'sym_offset bigint,'
+ 'ip bigint,'
+ 'time bigint,'
+ 'cpu integer,'
+ 'to_dso_id bigint,'
+ 'to_symbol_id bigint,'
+ 'to_sym_offset bigint,'
+ 'to_ip bigint,'
+ 'period bigint,'
+ 'weight bigint,'
+ 'transaction bigint,'
+ 'data_src bigint,'
+ 'branch_type integer,'
+ 'in_tx boolean)')
+
+if perf_db_export_calls:
+ do_query(query, 'CREATE TABLE call_paths ('
+ 'id bigint NOT NULL,'
+ 'parent_id bigint,'
+ 'symbol_id bigint,'
+ 'ip bigint)')
+ do_query(query, 'CREATE TABLE calls ('
+ 'id bigint NOT NULL,'
+ 'thread_id bigint,'
+ 'comm_id bigint,'
+ 'call_path_id bigint,'
+ 'call_time bigint,'
+ 'return_time bigint,'
+ 'branch_count bigint,'
+ 'call_id bigint,'
+ 'return_id bigint,'
+ 'parent_call_path_id bigint,'
+ 'flags integer)')
+
+do_query(query, 'CREATE VIEW samples_view AS '
+ 'SELECT '
+ 'id,'
+ 'time,'
+ 'cpu,'
+ '(SELECT pid FROM threads WHERE id = thread_id) AS pid,'
+ '(SELECT tid FROM threads WHERE id = thread_id) AS tid,'
+ '(SELECT comm FROM comms WHERE id = comm_id) AS command,'
+ '(SELECT name FROM selected_events WHERE id = evsel_id) AS event,'
+ 'to_hex(ip) AS ip_hex,'
+ '(SELECT name FROM symbols WHERE id = symbol_id) AS symbol,'
+ 'sym_offset,'
+ '(SELECT short_name FROM dsos WHERE id = dso_id) AS dso_short_name,'
+ 'to_hex(to_ip) AS to_ip_hex,'
+ '(SELECT name FROM symbols WHERE id = to_symbol_id) AS to_symbol,'
+ 'to_sym_offset,'
+ '(SELECT short_name FROM dsos WHERE id = to_dso_id) AS to_dso_short_name,'
+ '(SELECT name FROM branch_types WHERE id = branch_type) AS branch_type_name,'
+ 'in_tx'
+ ' FROM samples')
+
+
+file_header = struct.pack("!11sii", "PGCOPY\n\377\r\n\0", 0, 0)
+file_trailer = "\377\377"
+
+def open_output_file(file_name):
+ path_name = output_dir_name + "/" + file_name
+ file = open(path_name, "w+")
+ file.write(file_header)
+ return file
+
+def close_output_file(file):
+ file.write(file_trailer)
+ file.close()
+
+def copy_output_file_direct(file, table_name):
+ close_output_file(file)
+ sql = "COPY " + table_name + " FROM '" + file.name + "' (FORMAT 'binary')"
+ do_query(query, sql)
+
+# Use COPY FROM STDIN because security may prevent postgres from accessing the files directly
+def copy_output_file(file, table_name):
+ conn = PQconnectdb("dbname = " + dbname)
+ if (PQstatus(conn)):
+ raise Exception("COPY FROM STDIN PQconnectdb failed")
+ file.write(file_trailer)
+ file.seek(0)
+ sql = "COPY " + table_name + " FROM STDIN (FORMAT 'binary')"
+ res = PQexec(conn, sql)
+ if (PQresultStatus(res) != 4):
+ raise Exception("COPY FROM STDIN PQexec failed")
+ data = file.read(65536)
+ while (len(data)):
+ ret = PQputCopyData(conn, data, len(data))
+ if (ret != 1):
+ raise Exception("COPY FROM STDIN PQputCopyData failed, error " + str(ret))
+ data = file.read(65536)
+ ret = PQputCopyEnd(conn, None)
+ if (ret != 1):
+ raise Exception("COPY FROM STDIN PQputCopyEnd failed, error " + str(ret))
+ PQfinish(conn)
+
+def remove_output_file(file):
+ name = file.name
+ file.close()
+ os.unlink(name)
+
+evsel_file = open_output_file("evsel_table.bin")
+machine_file = open_output_file("machine_table.bin")
+thread_file = open_output_file("thread_table.bin")
+comm_file = open_output_file("comm_table.bin")
+comm_thread_file = open_output_file("comm_thread_table.bin")
+dso_file = open_output_file("dso_table.bin")
+symbol_file = open_output_file("symbol_table.bin")
+branch_type_file = open_output_file("branch_type_table.bin")
+sample_file = open_output_file("sample_table.bin")
+if perf_db_export_calls:
+ call_path_file = open_output_file("call_path_table.bin")
+ call_file = open_output_file("call_table.bin")
+
+def trace_begin():
+ print datetime.datetime.today(), "Writing to intermediate files..."
+ # id == 0 means unknown. It is easier to create records for them than replace the zeroes with NULLs
+ evsel_table(0, "unknown")
+ machine_table(0, 0, "unknown")
+ thread_table(0, 0, 0, -1, -1)
+ comm_table(0, "unknown")
+ dso_table(0, 0, "unknown", "unknown", "")
+ symbol_table(0, 0, 0, 0, 0, "unknown")
+ sample_table(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0)
+ if perf_db_export_calls:
+ call_path_table(0, 0, 0, 0)
+
+unhandled_count = 0
+
+def trace_end():
+ print datetime.datetime.today(), "Copying to database..."
+ copy_output_file(evsel_file, "selected_events")
+ copy_output_file(machine_file, "machines")
+ copy_output_file(thread_file, "threads")
+ copy_output_file(comm_file, "comms")
+ copy_output_file(comm_thread_file, "comm_threads")
+ copy_output_file(dso_file, "dsos")
+ copy_output_file(symbol_file, "symbols")
+ copy_output_file(branch_type_file, "branch_types")
+ copy_output_file(sample_file, "samples")
+ if perf_db_export_calls:
+ copy_output_file(call_path_file, "call_paths")
+ copy_output_file(call_file, "calls")
+
+ print datetime.datetime.today(), "Removing intermediate files..."
+ remove_output_file(evsel_file)
+ remove_output_file(machine_file)
+ remove_output_file(thread_file)
+ remove_output_file(comm_file)
+ remove_output_file(comm_thread_file)
+ remove_output_file(dso_file)
+ remove_output_file(symbol_file)
+ remove_output_file(branch_type_file)
+ remove_output_file(sample_file)
+ if perf_db_export_calls:
+ remove_output_file(call_path_file)
+ remove_output_file(call_file)
+ os.rmdir(output_dir_name)
+ print datetime.datetime.today(), "Adding primary keys"
+ do_query(query, 'ALTER TABLE selected_events ADD PRIMARY KEY (id)')
+ do_query(query, 'ALTER TABLE machines ADD PRIMARY KEY (id)')
+ do_query(query, 'ALTER TABLE threads ADD PRIMARY KEY (id)')
+ do_query(query, 'ALTER TABLE comms ADD PRIMARY KEY (id)')
+ do_query(query, 'ALTER TABLE comm_threads ADD PRIMARY KEY (id)')
+ do_query(query, 'ALTER TABLE dsos ADD PRIMARY KEY (id)')
+ do_query(query, 'ALTER TABLE symbols ADD PRIMARY KEY (id)')
+ do_query(query, 'ALTER TABLE branch_types ADD PRIMARY KEY (id)')
+ do_query(query, 'ALTER TABLE samples ADD PRIMARY KEY (id)')
+ if perf_db_export_calls:
+ do_query(query, 'ALTER TABLE call_paths ADD PRIMARY KEY (id)')
+ do_query(query, 'ALTER TABLE calls ADD PRIMARY KEY (id)')
+
+ print datetime.datetime.today(), "Adding foreign keys"
+ do_query(query, 'ALTER TABLE threads '
+ 'ADD CONSTRAINT machinefk FOREIGN KEY (machine_id) REFERENCES machines (id),'
+ 'ADD CONSTRAINT processfk FOREIGN KEY (process_id) REFERENCES threads (id)')
+ do_query(query, 'ALTER TABLE comm_threads '
+ 'ADD CONSTRAINT commfk FOREIGN KEY (comm_id) REFERENCES comms (id),'
+ 'ADD CONSTRAINT threadfk FOREIGN KEY (thread_id) REFERENCES threads (id)')
+ do_query(query, 'ALTER TABLE dsos '
+ 'ADD CONSTRAINT machinefk FOREIGN KEY (machine_id) REFERENCES machines (id)')
+ do_query(query, 'ALTER TABLE symbols '
+ 'ADD CONSTRAINT dsofk FOREIGN KEY (dso_id) REFERENCES dsos (id)')
+ do_query(query, 'ALTER TABLE samples '
+ 'ADD CONSTRAINT evselfk FOREIGN KEY (evsel_id) REFERENCES selected_events (id),'
+ 'ADD CONSTRAINT machinefk FOREIGN KEY (machine_id) REFERENCES machines (id),'
+ 'ADD CONSTRAINT threadfk FOREIGN KEY (thread_id) REFERENCES threads (id),'
+ 'ADD CONSTRAINT commfk FOREIGN KEY (comm_id) REFERENCES comms (id),'
+ 'ADD CONSTRAINT dsofk FOREIGN KEY (dso_id) REFERENCES dsos (id),'
+ 'ADD CONSTRAINT symbolfk FOREIGN KEY (symbol_id) REFERENCES symbols (id),'
+ 'ADD CONSTRAINT todsofk FOREIGN KEY (to_dso_id) REFERENCES dsos (id),'
+ 'ADD CONSTRAINT tosymbolfk FOREIGN KEY (to_symbol_id) REFERENCES symbols (id)')
+ if perf_db_export_calls:
+ do_query(query, 'ALTER TABLE call_paths '
+ 'ADD CONSTRAINT parentfk FOREIGN KEY (parent_id) REFERENCES call_paths (id),'
+ 'ADD CONSTRAINT symbolfk FOREIGN KEY (symbol_id) REFERENCES symbols (id)')
+ do_query(query, 'ALTER TABLE calls '
+ 'ADD CONSTRAINT threadfk FOREIGN KEY (thread_id) REFERENCES threads (id),'
+ 'ADD CONSTRAINT commfk FOREIGN KEY (comm_id) REFERENCES comms (id),'
+ 'ADD CONSTRAINT call_pathfk FOREIGN KEY (call_path_id) REFERENCES call_paths (id),'
+ 'ADD CONSTRAINT callfk FOREIGN KEY (call_id) REFERENCES samples (id),'
+ 'ADD CONSTRAINT returnfk FOREIGN KEY (return_id) REFERENCES samples (id),'
+ 'ADD CONSTRAINT parent_call_pathfk FOREIGN KEY (parent_call_path_id) REFERENCES call_paths (id)')
+ do_query(query, 'CREATE INDEX pcpid_idx ON calls (parent_call_path_id)')
+
+ if (unhandled_count):
+ print datetime.datetime.today(), "Warning: ", unhandled_count, " unhandled events"
+ print datetime.datetime.today(), "Done"
+
+def trace_unhandled(event_name, context, event_fields_dict):
+ global unhandled_count
+ unhandled_count += 1
+
+def sched__sched_switch(*x):
+ pass
+
+def evsel_table(evsel_id, evsel_name, *x):
+ n = len(evsel_name)
+ fmt = "!hiqi" + str(n) + "s"
+ value = struct.pack(fmt, 2, 8, evsel_id, n, evsel_name)
+ evsel_file.write(value)
+
+def machine_table(machine_id, pid, root_dir, *x):
+ n = len(root_dir)
+ fmt = "!hiqiii" + str(n) + "s"
+ value = struct.pack(fmt, 3, 8, machine_id, 4, pid, n, root_dir)
+ machine_file.write(value)
+
+def thread_table(thread_id, machine_id, process_id, pid, tid, *x):
+ value = struct.pack("!hiqiqiqiiii", 5, 8, thread_id, 8, machine_id, 8, process_id, 4, pid, 4, tid)
+ thread_file.write(value)
+
+def comm_table(comm_id, comm_str, *x):
+ n = len(comm_str)
+ fmt = "!hiqi" + str(n) + "s"
+ value = struct.pack(fmt, 2, 8, comm_id, n, comm_str)
+ comm_file.write(value)
+
+def comm_thread_table(comm_thread_id, comm_id, thread_id, *x):
+ fmt = "!hiqiqiq"
+ value = struct.pack(fmt, 3, 8, comm_thread_id, 8, comm_id, 8, thread_id)
+ comm_thread_file.write(value)
+
+def dso_table(dso_id, machine_id, short_name, long_name, build_id, *x):
+ n1 = len(short_name)
+ n2 = len(long_name)
+ n3 = len(build_id)
+ fmt = "!hiqiqi" + str(n1) + "si" + str(n2) + "si" + str(n3) + "s"
+ value = struct.pack(fmt, 5, 8, dso_id, 8, machine_id, n1, short_name, n2, long_name, n3, build_id)
+ dso_file.write(value)
+
+def symbol_table(symbol_id, dso_id, sym_start, sym_end, binding, symbol_name, *x):
+ n = len(symbol_name)
+ fmt = "!hiqiqiqiqiii" + str(n) + "s"
+ value = struct.pack(fmt, 6, 8, symbol_id, 8, dso_id, 8, sym_start, 8, sym_end, 4, binding, n, symbol_name)
+ symbol_file.write(value)
+
+def branch_type_table(branch_type, name, *x):
+ n = len(name)
+ fmt = "!hiii" + str(n) + "s"
+ value = struct.pack(fmt, 2, 4, branch_type, n, name)
+ branch_type_file.write(value)
+
+def sample_table(sample_id, evsel_id, machine_id, thread_id, comm_id, dso_id, symbol_id, sym_offset, ip, time, cpu, to_dso_id, to_symbol_id, to_sym_offset, to_ip, period, weight, transaction, data_src, branch_type, in_tx, *x):
+ if branches:
+ value = struct.pack("!hiqiqiqiqiqiqiqiqiqiqiiiqiqiqiqiiiB", 17, 8, sample_id, 8, evsel_id, 8, machine_id, 8, thread_id, 8, comm_id, 8, dso_id, 8, symbol_id, 8, sym_offset, 8, ip, 8, time, 4, cpu, 8, to_dso_id, 8, to_symbol_id, 8, to_sym_offset, 8, to_ip, 4, branch_type, 1, in_tx)
+ else:
+ value = struct.pack("!hiqiqiqiqiqiqiqiqiqiqiiiqiqiqiqiqiqiqiqiiiB", 21, 8, sample_id, 8, evsel_id, 8, machine_id, 8, thread_id, 8, comm_id, 8, dso_id, 8, symbol_id, 8, sym_offset, 8, ip, 8, time, 4, cpu, 8, to_dso_id, 8, to_symbol_id, 8, to_sym_offset, 8, to_ip, 8, period, 8, weight, 8, transaction, 8, data_src, 4, branch_type, 1, in_tx)
+ sample_file.write(value)
+
+def call_path_table(cp_id, parent_id, symbol_id, ip, *x):
+ fmt = "!hiqiqiqiq"
+ value = struct.pack(fmt, 4, 8, cp_id, 8, parent_id, 8, symbol_id, 8, ip)
+ call_path_file.write(value)
+
+def call_return_table(cr_id, thread_id, comm_id, call_path_id, call_time, return_time, branch_count, call_id, return_id, parent_call_path_id, flags, *x):
+ fmt = "!hiqiqiqiqiqiqiqiqiqiqii"
+ value = struct.pack(fmt, 11, 8, cr_id, 8, thread_id, 8, comm_id, 8, call_path_id, 8, call_time, 8, return_time, 8, branch_count, 8, call_id, 8, return_id, 8, parent_call_path_id, 4, flags)
+ call_file.write(value)
.func = test__hists_link,
},
{
- .desc = "Try 'use perf' in python, checking link problems",
+ .desc = "Try 'import perf' in python, checking link problems",
.func = test__python_use,
},
{
}
static int read_object_code(u64 addr, size_t len, u8 cpumode,
- struct thread *thread, struct machine *machine,
- struct state *state)
+ struct thread *thread, struct state *state)
{
struct addr_location al;
unsigned char buf1[BUFSZ];
pr_debug("Reading object code for memory address: %#"PRIx64"\n", addr);
- thread__find_addr_map(thread, machine, cpumode, MAP__FUNCTION, addr,
- &al);
+ thread__find_addr_map(thread, cpumode, MAP__FUNCTION, addr, &al);
if (!al.map || !al.map->dso) {
pr_debug("thread__find_addr_map failed\n");
return -1;
len = al.map->end - addr;
/* Read the object code using perf */
- ret_len = dso__data_read_offset(al.map->dso, machine, al.addr, buf1,
- len);
+ ret_len = dso__data_read_offset(al.map->dso, thread->mg->machine,
+ al.addr, buf1, len);
if (ret_len != len) {
pr_debug("dso__data_read_offset failed\n");
return -1;
cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK;
- return read_object_code(sample.ip, READLEN, cpumode, thread, machine,
- state);
+ return read_object_code(sample.ip, READLEN, cpumode, thread, state);
}
static int process_event(struct machine *machine, struct perf_evlist *evlist,
}
__attribute__ ((noinline))
-static int unwind_thread(struct thread *thread, struct machine *machine)
+static int unwind_thread(struct thread *thread)
{
struct perf_sample sample;
unsigned long cnt = 0;
goto out;
}
- err = unwind__get_entries(unwind_entry, &cnt, machine, thread,
+ err = unwind__get_entries(unwind_entry, &cnt, thread,
&sample, MAX_STACK);
if (err)
pr_debug("unwind failed\n");
}
__attribute__ ((noinline))
-static int krava_3(struct thread *thread, struct machine *machine)
+static int krava_3(struct thread *thread)
{
- return unwind_thread(thread, machine);
+ return unwind_thread(thread);
}
__attribute__ ((noinline))
-static int krava_2(struct thread *thread, struct machine *machine)
+static int krava_2(struct thread *thread)
{
- return krava_3(thread, machine);
+ return krava_3(thread);
}
__attribute__ ((noinline))
-static int krava_1(struct thread *thread, struct machine *machine)
+static int krava_1(struct thread *thread)
{
- return krava_2(thread, machine);
+ return krava_2(thread);
}
int test__dwarf_unwind(void)
goto out;
}
- err = krava_1(thread, machine);
+ err = krava_1(thread);
out:
machine__delete_threads(machine);
};
static int add_hist_entries(struct perf_evlist *evlist,
- struct machine *machine __maybe_unused)
+ struct machine *machine)
{
struct perf_evsel *evsel;
struct addr_location al;
pr_debug("looking for map %p\n", td->map);
- thread__find_addr_map(thread, machine,
+ thread__find_addr_map(thread,
PERF_RECORD_MISC_USER, MAP__FUNCTION,
(unsigned long) (td->map + 1), &al);
if (type & PERF_SAMPLE_TRANSACTION)
COMP(transaction);
+ if (type & PERF_SAMPLE_REGS_INTR) {
+ size_t sz = hweight_long(s1->intr_regs.mask) * sizeof(u64);
+
+ COMP(intr_regs.mask);
+ COMP(intr_regs.abi);
+ if (s1->intr_regs.abi &&
+ (!s1->intr_regs.regs || !s2->intr_regs.regs ||
+ memcmp(s1->intr_regs.regs, s2->intr_regs.regs, sz))) {
+ pr_debug("Samples differ at 'intr_regs'\n");
+ return false;
+ }
+ }
+
return true;
}
-static int do_test(u64 sample_type, u64 sample_regs_user, u64 read_format)
+static int do_test(u64 sample_type, u64 sample_regs, u64 read_format)
{
struct perf_evsel evsel = {
.needs_swap = false,
.attr = {
.sample_type = sample_type,
- .sample_regs_user = sample_regs_user,
.read_format = read_format,
},
};
/* 1 branch_entry */
.data = {1, 211, 212, 213},
};
- u64 user_regs[64];
+ u64 regs[64];
const u64 raw_data[] = {0x123456780a0b0c0dULL, 0x1102030405060708ULL};
const u64 data[] = {0x2211443366558877ULL, 0, 0xaabbccddeeff4321ULL};
struct perf_sample sample = {
.branch_stack = &branch_stack.branch_stack,
.user_regs = {
.abi = PERF_SAMPLE_REGS_ABI_64,
- .mask = sample_regs_user,
- .regs = user_regs,
+ .mask = sample_regs,
+ .regs = regs,
},
.user_stack = {
.size = sizeof(data),
.time_enabled = 0x030a59d664fca7deULL,
.time_running = 0x011b6ae553eb98edULL,
},
+ .intr_regs = {
+ .abi = PERF_SAMPLE_REGS_ABI_64,
+ .mask = sample_regs,
+ .regs = regs,
+ },
};
struct sample_read_value values[] = {{1, 5}, {9, 3}, {2, 7}, {6, 4},};
struct perf_sample sample_out;
size_t i, sz, bufsz;
int err, ret = -1;
- for (i = 0; i < sizeof(user_regs); i++)
- *(i + (u8 *)user_regs) = i & 0xfe;
+ if (sample_type & PERF_SAMPLE_REGS_USER)
+ evsel.attr.sample_regs_user = sample_regs;
+
+ if (sample_type & PERF_SAMPLE_REGS_INTR)
+ evsel.attr.sample_regs_intr = sample_regs;
+
+ for (i = 0; i < sizeof(regs); i++)
+ *(i + (u8 *)regs) = i & 0xfe;
if (read_format & PERF_FORMAT_GROUP) {
sample.read.group.nr = 4;
{
const u64 rf[] = {4, 5, 6, 7, 12, 13, 14, 15};
u64 sample_type;
- u64 sample_regs_user;
+ u64 sample_regs;
size_t i;
int err;
* were added. Please actually update the test rather than just change
* the condition below.
*/
- if (PERF_SAMPLE_MAX > PERF_SAMPLE_TRANSACTION << 1) {
+ if (PERF_SAMPLE_MAX > PERF_SAMPLE_REGS_INTR << 1) {
pr_debug("sample format has changed, some new PERF_SAMPLE_ bit was introduced - test needs updating\n");
return -1;
}
}
continue;
}
+ sample_regs = 0;
if (sample_type == PERF_SAMPLE_REGS_USER)
- sample_regs_user = 0x3fff;
- else
- sample_regs_user = 0;
+ sample_regs = 0x3fff;
+
+ if (sample_type == PERF_SAMPLE_REGS_INTR)
+ sample_regs = 0xff0fff;
- err = do_test(sample_type, sample_regs_user, 0);
+ err = do_test(sample_type, sample_regs, 0);
if (err)
return err;
}
/* Test all sample format bits together */
sample_type = PERF_SAMPLE_MAX - 1;
- sample_regs_user = 0x3fff;
+ sample_regs = 0x3fff; /* shared yb intr and user regs */
for (i = 0; i < ARRAY_SIZE(rf); i++) {
- err = do_test(sample_type, sample_regs_user, rf[i]);
+ err = do_test(sample_type, sample_regs, rf[i]);
if (err)
return err;
}
bool hide_src_code,
use_offset,
jump_arrows,
+ show_linenr,
show_nr_jumps;
} annotate_browser__opts = {
.use_offset = true,
if (!*dl->line)
slsmg_write_nstring(" ", width - pcnt_width);
else if (dl->offset == -1) {
- printed = scnprintf(bf, sizeof(bf), "%*s ",
+ if (dl->line_nr && annotate_browser__opts.show_linenr)
+ printed = scnprintf(bf, sizeof(bf), "%-*d ",
+ ab->addr_width + 1, dl->line_nr);
+ else
+ printed = scnprintf(bf, sizeof(bf), "%*s ",
ab->addr_width, " ");
slsmg_write_nstring(bf, printed);
slsmg_write_nstring(dl->line, width - printed - pcnt_width + 1);
"o Toggle disassembler output/simplified view\n"
"s Toggle source code view\n"
"/ Search string\n"
+ "k Toggle line numbers\n"
"r Run available scripts\n"
"? Search string backwards\n");
continue;
script_browse(NULL);
continue;
}
+ case 'k':
+ annotate_browser__opts.show_linenr =
+ !annotate_browser__opts.show_linenr;
+ break;
case 'H':
nd = browser->curr_hot;
break;
} annotate__configs[] = {
ANNOTATE_CFG(hide_src_code),
ANNOTATE_CFG(jump_arrows),
+ ANNOTATE_CFG(show_linenr),
ANNOTATE_CFG(show_nr_jumps),
ANNOTATE_CFG(use_offset),
};
}
}
-static void callchain_node__init_have_children(struct callchain_node *node)
+static void callchain_node__init_have_children(struct callchain_node *node,
+ bool has_sibling)
{
struct callchain_list *chain;
+ chain = list_entry(node->val.next, struct callchain_list, list);
+ chain->ms.has_children = has_sibling;
+
if (!list_empty(&node->val)) {
chain = list_entry(node->val.prev, struct callchain_list, list);
chain->ms.has_children = !RB_EMPTY_ROOT(&node->rb_root);
static void callchain__init_have_children(struct rb_root *root)
{
- struct rb_node *nd;
+ struct rb_node *nd = rb_first(root);
+ bool has_sibling = nd && rb_next(nd);
for (nd = rb_first(root); nd; nd = rb_next(nd)) {
struct callchain_node *node = rb_entry(nd, struct callchain_node, rb_node);
- callchain_node__init_have_children(node);
+ callchain_node__init_have_children(node, has_sibling);
}
}
return key;
}
-static char *callchain_list__sym_name(struct callchain_list *cl,
- char *bf, size_t bfsize, bool show_dso)
-{
- int printed;
-
- if (cl->ms.sym)
- printed = scnprintf(bf, bfsize, "%s", cl->ms.sym->name);
- else
- printed = scnprintf(bf, bfsize, "%#" PRIx64, cl->ip);
-
- if (show_dso)
- scnprintf(bf + printed, bfsize - printed, " %s",
- cl->ms.map ? cl->ms.map->dso->short_name : "unknown");
-
- return bf;
-}
-
struct callchain_print_arg {
/* for hists browser */
off_t row_offset;
struct rb_node *node;
int first_row = row, offset = level * LEVEL_OFFSET_STEP;
u64 new_total;
+ bool need_percent;
node = rb_first(root);
+ need_percent = !!rb_next(node);
+
while (node) {
struct callchain_node *child = rb_entry(node, struct callchain_node, rb_node);
struct rb_node *next = rb_next(node);
if (first)
first = false;
- else if (level > 1)
+ else if (need_percent)
extra_offset = LEVEL_OFFSET_STEP;
folded_sign = callchain_list__folded(chain);
str = callchain_list__sym_name(chain, bf, sizeof(bf),
browser->show_dso);
- if (was_first && level > 1) {
+ if (was_first && need_percent) {
double percent = cumul * 100.0 / total;
if (asprintf(&alloc_str, "%2.2f%% %s", percent, str) < 0)
.is_current_entry = current_entry,
};
+ if (callchain_param.mode == CHAIN_GRAPH_REL) {
+ if (symbol_conf.cumulate_callchain)
+ total = entry->stat_acc->period;
+ else
+ total = entry->stat.period;
+ }
+
printed += hist_browser__show_callchain(browser,
&entry->sorted_chain, 1, row, total,
hist_browser__show_callchain_entry, &arg,
perf_gtk__hpp_color_overhead_acc;
}
-static void callchain_list__sym_name(struct callchain_list *cl,
- char *bf, size_t bfsize)
-{
- if (cl->ms.sym)
- scnprintf(bf, bfsize, "%s", cl->ms.sym->name);
- else
- scnprintf(bf, bfsize, "%#" PRIx64, cl->ip);
-}
-
static void perf_gtk__add_callchain(struct rb_root *root, GtkTreeStore *store,
GtkTreeIter *parent, int col, u64 total)
{
scnprintf(buf, sizeof(buf), "%5.2f%%", percent);
gtk_tree_store_set(store, &iter, 0, buf, -1);
- callchain_list__sym_name(chain, buf, sizeof(buf));
+ callchain_list__sym_name(chain, buf, sizeof(buf), false);
gtk_tree_store_set(store, &iter, col, buf, -1);
if (need_new_parent) {
{
int i;
size_t ret = 0;
+ char bf[1024];
ret += callchain__fprintf_left_margin(fp, left_margin);
for (i = 0; i < depth; i++) {
} else
ret += fprintf(fp, "%s", " ");
}
- if (chain->ms.sym)
- ret += fprintf(fp, "%s\n", chain->ms.sym->name);
- else
- ret += fprintf(fp, "0x%0" PRIx64 "\n", chain->ip);
-
+ fputs(callchain_list__sym_name(chain, bf, sizeof(bf), false), fp);
+ fputc('\n', fp);
return ret;
}
struct rb_node *node;
int i = 0;
int ret = 0;
+ char bf[1024];
/*
* If have one single callchain root, don't bother printing
} else
ret += callchain__fprintf_left_margin(fp, left_margin);
- if (chain->ms.sym)
- ret += fprintf(fp, " %s\n", chain->ms.sym->name);
- else
- ret += fprintf(fp, " %p\n", (void *)(long)chain->ip);
+ ret += fprintf(fp, "%s\n", callchain_list__sym_name(chain, bf, sizeof(bf),
+ false));
if (++entries_printed == callchain_param.print_limit)
break;
{
struct callchain_list *chain;
size_t ret = 0;
+ char bf[1024];
if (!node)
return 0;
list_for_each_entry(chain, &node->val, list) {
if (chain->ip >= PERF_CONTEXT_MAX)
continue;
- if (chain->ms.sym)
- ret += fprintf(fp, " %s\n", chain->ms.sym->name);
- else
- ret += fprintf(fp, " %p\n",
- (void *)(long)chain->ip);
+ ret += fprintf(fp, " %s\n", callchain_list__sym_name(chain,
+ bf, sizeof(bf), false));
}
return ret;
#include "debug.h"
#include "annotate.h"
#include "evsel.h"
+#include <regex.h>
#include <pthread.h>
#include <linux/bitops.h>
const char *disassembler_style;
const char *objdump_path;
+static regex_t file_lineno;
static struct ins *ins__find(const char *name);
static int disasm_line__parse(char *line, char **namep, char **rawp);
return -1;
}
-static struct disasm_line *disasm_line__new(s64 offset, char *line, size_t privsize)
+static struct disasm_line *disasm_line__new(s64 offset, char *line,
+ size_t privsize, int line_nr)
{
struct disasm_line *dl = zalloc(sizeof(*dl) + privsize);
if (dl != NULL) {
dl->offset = offset;
dl->line = strdup(line);
+ dl->line_nr = line_nr;
if (dl->line == NULL)
goto out_delete;
* The ops.raw part will be parsed further according to type of the instruction.
*/
static int symbol__parse_objdump_line(struct symbol *sym, struct map *map,
- FILE *file, size_t privsize)
+ FILE *file, size_t privsize,
+ int *line_nr)
{
struct annotation *notes = symbol__annotation(sym);
struct disasm_line *dl;
char *line = NULL, *parsed_line, *tmp, *tmp2, *c;
size_t line_len;
s64 line_ip, offset = -1;
+ regmatch_t match[2];
if (getline(&line, &line_len, file) < 0)
return -1;
line_ip = -1;
parsed_line = line;
+ /* /filename:linenr ? Save line number and ignore. */
+ if (regexec(&file_lineno, line, 2, match, 0) == 0) {
+ *line_nr = atoi(line + match[1].rm_so);
+ return 0;
+ }
+
/*
* Strip leading spaces:
*/
parsed_line = tmp2 + 1;
}
- dl = disasm_line__new(offset, parsed_line, privsize);
+ dl = disasm_line__new(offset, parsed_line, privsize, *line_nr);
free(line);
+ (*line_nr)++;
if (dl == NULL)
return -1;
return 0;
}
+static __attribute__((constructor)) void symbol__init_regexpr(void)
+{
+ regcomp(&file_lineno, "^/[^:]+:([0-9]+)", REG_EXTENDED);
+}
+
static void delete_last_nop(struct symbol *sym)
{
struct annotation *notes = symbol__annotation(sym);
char symfs_filename[PATH_MAX];
struct kcore_extract kce;
bool delete_extract = false;
+ int lineno = 0;
if (filename)
symbol__join_symfs(symfs_filename, filename);
return -ENOMEM;
}
goto fallback;
+ } else if (dso__is_kcore(dso)) {
+ goto fallback;
} else if (readlink(symfs_filename, command, sizeof(command)) < 0 ||
strstr(command, "[kernel.kallsyms]") ||
access(symfs_filename, R_OK)) {
snprintf(command, sizeof(command),
"%s %s%s --start-address=0x%016" PRIx64
" --stop-address=0x%016" PRIx64
- " -d %s %s -C %s 2>/dev/null|grep -v %s|expand",
+ " -l -d %s %s -C %s 2>/dev/null|grep -v %s|expand",
objdump_path ? objdump_path : "objdump",
disassembler_style ? "-M " : "",
disassembler_style ? disassembler_style : "",
goto out_free_filename;
while (!feof(file))
- if (symbol__parse_objdump_line(sym, map, file, privsize) < 0)
+ if (symbol__parse_objdump_line(sym, map, file, privsize,
+ &lineno) < 0)
break;
/*
goto next;
offset = start + i;
- src_line->path = get_srcline(map->dso, offset);
+ src_line->path = get_srcline(map->dso, offset, NULL, false);
insert_source_line(&tmp_root, src_line);
next:
char *line;
char *name;
struct ins *ins;
+ int line_nr;
struct ins_operands ops;
};
#include "debug.h"
#include "session.h"
#include "tool.h"
+#include "header.h"
+#include "vdso.h"
+
+
+static bool no_buildid_cache;
int build_id__mark_dso_hit(struct perf_tool *tool __maybe_unused,
union perf_event *event,
return -1;
}
- thread__find_addr_map(thread, machine, cpumode, MAP__FUNCTION,
- sample->ip, &al);
+ thread__find_addr_map(thread, cpumode, MAP__FUNCTION, sample->ip, &al);
if (al.map != NULL)
al.map->dso->hit = 1;
build_id_hex, build_id_hex + 2);
return bf;
}
+
+#define dsos__for_each_with_build_id(pos, head) \
+ list_for_each_entry(pos, head, node) \
+ if (!pos->has_build_id) \
+ continue; \
+ else
+
+static int write_buildid(const char *name, size_t name_len, u8 *build_id,
+ pid_t pid, u16 misc, int fd)
+{
+ int err;
+ struct build_id_event b;
+ size_t len;
+
+ len = name_len + 1;
+ len = PERF_ALIGN(len, NAME_ALIGN);
+
+ memset(&b, 0, sizeof(b));
+ memcpy(&b.build_id, build_id, BUILD_ID_SIZE);
+ b.pid = pid;
+ b.header.misc = misc;
+ b.header.size = sizeof(b) + len;
+
+ err = writen(fd, &b, sizeof(b));
+ if (err < 0)
+ return err;
+
+ return write_padded(fd, name, name_len + 1, len);
+}
+
+static int __dsos__write_buildid_table(struct list_head *head,
+ struct machine *machine,
+ pid_t pid, u16 misc, int fd)
+{
+ char nm[PATH_MAX];
+ struct dso *pos;
+
+ dsos__for_each_with_build_id(pos, head) {
+ int err;
+ const char *name;
+ size_t name_len;
+
+ if (!pos->hit)
+ continue;
+
+ if (dso__is_vdso(pos)) {
+ name = pos->short_name;
+ name_len = pos->short_name_len + 1;
+ } else if (dso__is_kcore(pos)) {
+ machine__mmap_name(machine, nm, sizeof(nm));
+ name = nm;
+ name_len = strlen(nm) + 1;
+ } else {
+ name = pos->long_name;
+ name_len = pos->long_name_len + 1;
+ }
+
+ err = write_buildid(name, name_len, pos->build_id,
+ pid, misc, fd);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+static int machine__write_buildid_table(struct machine *machine, int fd)
+{
+ int err;
+ u16 kmisc = PERF_RECORD_MISC_KERNEL,
+ umisc = PERF_RECORD_MISC_USER;
+
+ if (!machine__is_host(machine)) {
+ kmisc = PERF_RECORD_MISC_GUEST_KERNEL;
+ umisc = PERF_RECORD_MISC_GUEST_USER;
+ }
+
+ err = __dsos__write_buildid_table(&machine->kernel_dsos.head, machine,
+ machine->pid, kmisc, fd);
+ if (err == 0)
+ err = __dsos__write_buildid_table(&machine->user_dsos.head,
+ machine, machine->pid, umisc,
+ fd);
+ return err;
+}
+
+int perf_session__write_buildid_table(struct perf_session *session, int fd)
+{
+ struct rb_node *nd;
+ int err = machine__write_buildid_table(&session->machines.host, fd);
+
+ if (err)
+ return err;
+
+ for (nd = rb_first(&session->machines.guests); nd; nd = rb_next(nd)) {
+ struct machine *pos = rb_entry(nd, struct machine, rb_node);
+ err = machine__write_buildid_table(pos, fd);
+ if (err)
+ break;
+ }
+ return err;
+}
+
+static int __dsos__hit_all(struct list_head *head)
+{
+ struct dso *pos;
+
+ list_for_each_entry(pos, head, node)
+ pos->hit = true;
+
+ return 0;
+}
+
+static int machine__hit_all_dsos(struct machine *machine)
+{
+ int err;
+
+ err = __dsos__hit_all(&machine->kernel_dsos.head);
+ if (err)
+ return err;
+
+ return __dsos__hit_all(&machine->user_dsos.head);
+}
+
+int dsos__hit_all(struct perf_session *session)
+{
+ struct rb_node *nd;
+ int err;
+
+ err = machine__hit_all_dsos(&session->machines.host);
+ if (err)
+ return err;
+
+ for (nd = rb_first(&session->machines.guests); nd; nd = rb_next(nd)) {
+ struct machine *pos = rb_entry(nd, struct machine, rb_node);
+
+ err = machine__hit_all_dsos(pos);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+void disable_buildid_cache(void)
+{
+ no_buildid_cache = true;
+}
+
+int build_id_cache__add_s(const char *sbuild_id, const char *debugdir,
+ const char *name, bool is_kallsyms, bool is_vdso)
+{
+ const size_t size = PATH_MAX;
+ char *realname, *filename = zalloc(size),
+ *linkname = zalloc(size), *targetname;
+ int len, err = -1;
+ bool slash = is_kallsyms || is_vdso;
+
+ if (is_kallsyms) {
+ if (symbol_conf.kptr_restrict) {
+ pr_debug("Not caching a kptr_restrict'ed /proc/kallsyms\n");
+ err = 0;
+ goto out_free;
+ }
+ realname = (char *) name;
+ } else
+ realname = realpath(name, NULL);
+
+ if (realname == NULL || filename == NULL || linkname == NULL)
+ goto out_free;
+
+ len = scnprintf(filename, size, "%s%s%s",
+ debugdir, slash ? "/" : "",
+ is_vdso ? DSO__NAME_VDSO : realname);
+ if (mkdir_p(filename, 0755))
+ goto out_free;
+
+ snprintf(filename + len, size - len, "/%s", sbuild_id);
+
+ if (access(filename, F_OK)) {
+ if (is_kallsyms) {
+ if (copyfile("/proc/kallsyms", filename))
+ goto out_free;
+ } else if (link(realname, filename) && copyfile(name, filename))
+ goto out_free;
+ }
+
+ len = scnprintf(linkname, size, "%s/.build-id/%.2s",
+ debugdir, sbuild_id);
+
+ if (access(linkname, X_OK) && mkdir_p(linkname, 0755))
+ goto out_free;
+
+ snprintf(linkname + len, size - len, "/%s", sbuild_id + 2);
+ targetname = filename + strlen(debugdir) - 5;
+ memcpy(targetname, "../..", 5);
+
+ if (symlink(targetname, linkname) == 0)
+ err = 0;
+out_free:
+ if (!is_kallsyms)
+ free(realname);
+ free(filename);
+ free(linkname);
+ return err;
+}
+
+static int build_id_cache__add_b(const u8 *build_id, size_t build_id_size,
+ const char *name, const char *debugdir,
+ bool is_kallsyms, bool is_vdso)
+{
+ char sbuild_id[BUILD_ID_SIZE * 2 + 1];
+
+ build_id__sprintf(build_id, build_id_size, sbuild_id);
+
+ return build_id_cache__add_s(sbuild_id, debugdir, name,
+ is_kallsyms, is_vdso);
+}
+
+int build_id_cache__remove_s(const char *sbuild_id, const char *debugdir)
+{
+ const size_t size = PATH_MAX;
+ char *filename = zalloc(size),
+ *linkname = zalloc(size);
+ int err = -1;
+
+ if (filename == NULL || linkname == NULL)
+ goto out_free;
+
+ snprintf(linkname, size, "%s/.build-id/%.2s/%s",
+ debugdir, sbuild_id, sbuild_id + 2);
+
+ if (access(linkname, F_OK))
+ goto out_free;
+
+ if (readlink(linkname, filename, size - 1) < 0)
+ goto out_free;
+
+ if (unlink(linkname))
+ goto out_free;
+
+ /*
+ * Since the link is relative, we must make it absolute:
+ */
+ snprintf(linkname, size, "%s/.build-id/%.2s/%s",
+ debugdir, sbuild_id, filename);
+
+ if (unlink(linkname))
+ goto out_free;
+
+ err = 0;
+out_free:
+ free(filename);
+ free(linkname);
+ return err;
+}
+
+static int dso__cache_build_id(struct dso *dso, struct machine *machine,
+ const char *debugdir)
+{
+ bool is_kallsyms = dso->kernel && dso->long_name[0] != '/';
+ bool is_vdso = dso__is_vdso(dso);
+ const char *name = dso->long_name;
+ char nm[PATH_MAX];
+
+ if (dso__is_kcore(dso)) {
+ is_kallsyms = true;
+ machine__mmap_name(machine, nm, sizeof(nm));
+ name = nm;
+ }
+ return build_id_cache__add_b(dso->build_id, sizeof(dso->build_id), name,
+ debugdir, is_kallsyms, is_vdso);
+}
+
+static int __dsos__cache_build_ids(struct list_head *head,
+ struct machine *machine, const char *debugdir)
+{
+ struct dso *pos;
+ int err = 0;
+
+ dsos__for_each_with_build_id(pos, head)
+ if (dso__cache_build_id(pos, machine, debugdir))
+ err = -1;
+
+ return err;
+}
+
+static int machine__cache_build_ids(struct machine *machine, const char *debugdir)
+{
+ int ret = __dsos__cache_build_ids(&machine->kernel_dsos.head, machine,
+ debugdir);
+ ret |= __dsos__cache_build_ids(&machine->user_dsos.head, machine,
+ debugdir);
+ return ret;
+}
+
+int perf_session__cache_build_ids(struct perf_session *session)
+{
+ struct rb_node *nd;
+ int ret;
+ char debugdir[PATH_MAX];
+
+ if (no_buildid_cache)
+ return 0;
+
+ snprintf(debugdir, sizeof(debugdir), "%s", buildid_dir);
+
+ if (mkdir(debugdir, 0755) != 0 && errno != EEXIST)
+ return -1;
+
+ ret = machine__cache_build_ids(&session->machines.host, debugdir);
+
+ for (nd = rb_first(&session->machines.guests); nd; nd = rb_next(nd)) {
+ struct machine *pos = rb_entry(nd, struct machine, rb_node);
+ ret |= machine__cache_build_ids(pos, debugdir);
+ }
+ return ret ? -1 : 0;
+}
+
+static bool machine__read_build_ids(struct machine *machine, bool with_hits)
+{
+ bool ret;
+
+ ret = __dsos__read_build_ids(&machine->kernel_dsos.head, with_hits);
+ ret |= __dsos__read_build_ids(&machine->user_dsos.head, with_hits);
+ return ret;
+}
+
+bool perf_session__read_build_ids(struct perf_session *session, bool with_hits)
+{
+ struct rb_node *nd;
+ bool ret = machine__read_build_ids(&session->machines.host, with_hits);
+
+ for (nd = rb_first(&session->machines.guests); nd; nd = rb_next(nd)) {
+ struct machine *pos = rb_entry(nd, struct machine, rb_node);
+ ret |= machine__read_build_ids(pos, with_hits);
+ }
+
+ return ret;
+}
int build_id__mark_dso_hit(struct perf_tool *tool, union perf_event *event,
struct perf_sample *sample, struct perf_evsel *evsel,
struct machine *machine);
+
+int dsos__hit_all(struct perf_session *session);
+
+bool perf_session__read_build_ids(struct perf_session *session, bool with_hits);
+int perf_session__write_buildid_table(struct perf_session *session, int fd);
+int perf_session__cache_build_ids(struct perf_session *session);
+
+int build_id_cache__add_s(const char *sbuild_id, const char *debugdir,
+ const char *name, bool is_kallsyms, bool is_vdso);
+int build_id_cache__remove_s(const char *sbuild_id, const char *debugdir);
+void disable_buildid_cache(void);
+
#endif
callchain_param.key = CCKEY_ADDRESS;
return 0;
}
+ if (!strncmp(value, "branch", strlen(value))) {
+ callchain_param.branch_callstack = 1;
+ return 0;
+ }
return -1;
}
if (symbol_conf.use_callchain || symbol_conf.cumulate_callchain ||
sort__has_parent) {
- return machine__resolve_callchain(al->machine, evsel, al->thread,
- sample, parent, al, max_stack);
+ return thread__resolve_callchain(al->thread, evsel, sample,
+ parent, al, max_stack);
}
return 0;
}
out:
return 1;
}
+
+char *callchain_list__sym_name(struct callchain_list *cl,
+ char *bf, size_t bfsize, bool show_dso)
+{
+ int printed;
+
+ if (cl->ms.sym) {
+ if (callchain_param.key == CCKEY_ADDRESS &&
+ cl->ms.map && !cl->srcline)
+ cl->srcline = get_srcline(cl->ms.map->dso,
+ map__rip_2objdump(cl->ms.map,
+ cl->ip),
+ cl->ms.sym, false);
+ if (cl->srcline)
+ printed = scnprintf(bf, bfsize, "%s %s",
+ cl->ms.sym->name, cl->srcline);
+ else
+ printed = scnprintf(bf, bfsize, "%s", cl->ms.sym->name);
+ } else
+ printed = scnprintf(bf, bfsize, "%#" PRIx64, cl->ip);
+
+ if (show_dso)
+ scnprintf(bf + printed, bfsize - printed, " %s",
+ cl->ms.map ?
+ cl->ms.map->dso->short_name :
+ "unknown");
+
+ return bf;
+}
sort_chain_func_t sort;
enum chain_order order;
enum chain_key key;
+ bool branch_callstack;
};
extern struct callchain_param callchain_param;
struct callchain_list {
u64 ip;
struct map_symbol ms;
+ char *srcline;
struct list_head list;
};
}
#ifdef HAVE_SKIP_CALLCHAIN_IDX
-extern int arch_skip_callchain_idx(struct machine *machine,
- struct thread *thread, struct ip_callchain *chain);
+extern int arch_skip_callchain_idx(struct thread *thread, struct ip_callchain *chain);
#else
-static inline int arch_skip_callchain_idx(struct machine *machine __maybe_unused,
- struct thread *thread __maybe_unused,
+static inline int arch_skip_callchain_idx(struct thread *thread __maybe_unused,
struct ip_callchain *chain __maybe_unused)
{
return -1;
}
#endif
+char *callchain_list__sym_name(struct callchain_list *cl,
+ char *bf, size_t bfsize, bool show_dso);
+
#endif /* __PERF_CALLCHAIN_H */
u64 start;
struct list_head list;
bool exec;
+ union { /* Tool specific area */
+ void *priv;
+ u64 db_id;
+ };
};
void comm__free(struct comm *comm);
--- /dev/null
+/*
+ * db-export.c: Support for exporting data suitable for import to a database
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <errno.h>
+
+#include "evsel.h"
+#include "machine.h"
+#include "thread.h"
+#include "comm.h"
+#include "symbol.h"
+#include "event.h"
+#include "util.h"
+#include "thread-stack.h"
+#include "db-export.h"
+
+struct deferred_export {
+ struct list_head node;
+ struct comm *comm;
+};
+
+static int db_export__deferred(struct db_export *dbe)
+{
+ struct deferred_export *de;
+ int err;
+
+ while (!list_empty(&dbe->deferred)) {
+ de = list_entry(dbe->deferred.next, struct deferred_export,
+ node);
+ err = dbe->export_comm(dbe, de->comm);
+ list_del(&de->node);
+ free(de);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+static void db_export__free_deferred(struct db_export *dbe)
+{
+ struct deferred_export *de;
+
+ while (!list_empty(&dbe->deferred)) {
+ de = list_entry(dbe->deferred.next, struct deferred_export,
+ node);
+ list_del(&de->node);
+ free(de);
+ }
+}
+
+static int db_export__defer_comm(struct db_export *dbe, struct comm *comm)
+{
+ struct deferred_export *de;
+
+ de = zalloc(sizeof(struct deferred_export));
+ if (!de)
+ return -ENOMEM;
+
+ de->comm = comm;
+ list_add_tail(&de->node, &dbe->deferred);
+
+ return 0;
+}
+
+int db_export__init(struct db_export *dbe)
+{
+ memset(dbe, 0, sizeof(struct db_export));
+ INIT_LIST_HEAD(&dbe->deferred);
+ return 0;
+}
+
+int db_export__flush(struct db_export *dbe)
+{
+ return db_export__deferred(dbe);
+}
+
+void db_export__exit(struct db_export *dbe)
+{
+ db_export__free_deferred(dbe);
+ call_return_processor__free(dbe->crp);
+ dbe->crp = NULL;
+}
+
+int db_export__evsel(struct db_export *dbe, struct perf_evsel *evsel)
+{
+ if (evsel->db_id)
+ return 0;
+
+ evsel->db_id = ++dbe->evsel_last_db_id;
+
+ if (dbe->export_evsel)
+ return dbe->export_evsel(dbe, evsel);
+
+ return 0;
+}
+
+int db_export__machine(struct db_export *dbe, struct machine *machine)
+{
+ if (machine->db_id)
+ return 0;
+
+ machine->db_id = ++dbe->machine_last_db_id;
+
+ if (dbe->export_machine)
+ return dbe->export_machine(dbe, machine);
+
+ return 0;
+}
+
+int db_export__thread(struct db_export *dbe, struct thread *thread,
+ struct machine *machine, struct comm *comm)
+{
+ u64 main_thread_db_id = 0;
+ int err;
+
+ if (thread->db_id)
+ return 0;
+
+ thread->db_id = ++dbe->thread_last_db_id;
+
+ if (thread->pid_ != -1) {
+ struct thread *main_thread;
+
+ if (thread->pid_ == thread->tid) {
+ main_thread = thread;
+ } else {
+ main_thread = machine__findnew_thread(machine,
+ thread->pid_,
+ thread->pid_);
+ if (!main_thread)
+ return -ENOMEM;
+ err = db_export__thread(dbe, main_thread, machine,
+ comm);
+ if (err)
+ return err;
+ if (comm) {
+ err = db_export__comm_thread(dbe, comm, thread);
+ if (err)
+ return err;
+ }
+ }
+ main_thread_db_id = main_thread->db_id;
+ }
+
+ if (dbe->export_thread)
+ return dbe->export_thread(dbe, thread, main_thread_db_id,
+ machine);
+
+ return 0;
+}
+
+int db_export__comm(struct db_export *dbe, struct comm *comm,
+ struct thread *main_thread)
+{
+ int err;
+
+ if (comm->db_id)
+ return 0;
+
+ comm->db_id = ++dbe->comm_last_db_id;
+
+ if (dbe->export_comm) {
+ if (main_thread->comm_set)
+ err = dbe->export_comm(dbe, comm);
+ else
+ err = db_export__defer_comm(dbe, comm);
+ if (err)
+ return err;
+ }
+
+ return db_export__comm_thread(dbe, comm, main_thread);
+}
+
+int db_export__comm_thread(struct db_export *dbe, struct comm *comm,
+ struct thread *thread)
+{
+ u64 db_id;
+
+ db_id = ++dbe->comm_thread_last_db_id;
+
+ if (dbe->export_comm_thread)
+ return dbe->export_comm_thread(dbe, db_id, comm, thread);
+
+ return 0;
+}
+
+int db_export__dso(struct db_export *dbe, struct dso *dso,
+ struct machine *machine)
+{
+ if (dso->db_id)
+ return 0;
+
+ dso->db_id = ++dbe->dso_last_db_id;
+
+ if (dbe->export_dso)
+ return dbe->export_dso(dbe, dso, machine);
+
+ return 0;
+}
+
+int db_export__symbol(struct db_export *dbe, struct symbol *sym,
+ struct dso *dso)
+{
+ u64 *sym_db_id = symbol__priv(sym);
+
+ if (*sym_db_id)
+ return 0;
+
+ *sym_db_id = ++dbe->symbol_last_db_id;
+
+ if (dbe->export_symbol)
+ return dbe->export_symbol(dbe, sym, dso);
+
+ return 0;
+}
+
+static struct thread *get_main_thread(struct machine *machine, struct thread *thread)
+{
+ if (thread->pid_ == thread->tid)
+ return thread;
+
+ if (thread->pid_ == -1)
+ return NULL;
+
+ return machine__find_thread(machine, thread->pid_, thread->pid_);
+}
+
+static int db_ids_from_al(struct db_export *dbe, struct addr_location *al,
+ u64 *dso_db_id, u64 *sym_db_id, u64 *offset)
+{
+ int err;
+
+ if (al->map) {
+ struct dso *dso = al->map->dso;
+
+ err = db_export__dso(dbe, dso, al->machine);
+ if (err)
+ return err;
+ *dso_db_id = dso->db_id;
+
+ if (!al->sym) {
+ al->sym = symbol__new(al->addr, 0, 0, "unknown");
+ if (al->sym)
+ symbols__insert(&dso->symbols[al->map->type],
+ al->sym);
+ }
+
+ if (al->sym) {
+ u64 *db_id = symbol__priv(al->sym);
+
+ err = db_export__symbol(dbe, al->sym, dso);
+ if (err)
+ return err;
+ *sym_db_id = *db_id;
+ *offset = al->addr - al->sym->start;
+ }
+ }
+
+ return 0;
+}
+
+int db_export__branch_type(struct db_export *dbe, u32 branch_type,
+ const char *name)
+{
+ if (dbe->export_branch_type)
+ return dbe->export_branch_type(dbe, branch_type, name);
+
+ return 0;
+}
+
+int db_export__sample(struct db_export *dbe, union perf_event *event,
+ struct perf_sample *sample, struct perf_evsel *evsel,
+ struct thread *thread, struct addr_location *al)
+{
+ struct export_sample es = {
+ .event = event,
+ .sample = sample,
+ .evsel = evsel,
+ .thread = thread,
+ .al = al,
+ };
+ struct thread *main_thread;
+ struct comm *comm = NULL;
+ int err;
+
+ err = db_export__evsel(dbe, evsel);
+ if (err)
+ return err;
+
+ err = db_export__machine(dbe, al->machine);
+ if (err)
+ return err;
+
+ main_thread = get_main_thread(al->machine, thread);
+ if (main_thread)
+ comm = machine__thread_exec_comm(al->machine, main_thread);
+
+ err = db_export__thread(dbe, thread, al->machine, comm);
+ if (err)
+ return err;
+
+ if (comm) {
+ err = db_export__comm(dbe, comm, main_thread);
+ if (err)
+ return err;
+ es.comm_db_id = comm->db_id;
+ }
+
+ es.db_id = ++dbe->sample_last_db_id;
+
+ err = db_ids_from_al(dbe, al, &es.dso_db_id, &es.sym_db_id, &es.offset);
+ if (err)
+ return err;
+
+ if ((evsel->attr.sample_type & PERF_SAMPLE_ADDR) &&
+ sample_addr_correlates_sym(&evsel->attr)) {
+ struct addr_location addr_al;
+
+ perf_event__preprocess_sample_addr(event, sample, thread, &addr_al);
+ err = db_ids_from_al(dbe, &addr_al, &es.addr_dso_db_id,
+ &es.addr_sym_db_id, &es.addr_offset);
+ if (err)
+ return err;
+ if (dbe->crp) {
+ err = thread_stack__process(thread, comm, sample, al,
+ &addr_al, es.db_id,
+ dbe->crp);
+ if (err)
+ return err;
+ }
+ }
+
+ if (dbe->export_sample)
+ return dbe->export_sample(dbe, &es);
+
+ return 0;
+}
+
+static struct {
+ u32 branch_type;
+ const char *name;
+} branch_types[] = {
+ {0, "no branch"},
+ {PERF_IP_FLAG_BRANCH | PERF_IP_FLAG_CALL, "call"},
+ {PERF_IP_FLAG_BRANCH | PERF_IP_FLAG_RETURN, "return"},
+ {PERF_IP_FLAG_BRANCH | PERF_IP_FLAG_CONDITIONAL, "conditional jump"},
+ {PERF_IP_FLAG_BRANCH, "unconditional jump"},
+ {PERF_IP_FLAG_BRANCH | PERF_IP_FLAG_CALL | PERF_IP_FLAG_INTERRUPT,
+ "software interrupt"},
+ {PERF_IP_FLAG_BRANCH | PERF_IP_FLAG_RETURN | PERF_IP_FLAG_INTERRUPT,
+ "return from interrupt"},
+ {PERF_IP_FLAG_BRANCH | PERF_IP_FLAG_CALL | PERF_IP_FLAG_SYSCALLRET,
+ "system call"},
+ {PERF_IP_FLAG_BRANCH | PERF_IP_FLAG_RETURN | PERF_IP_FLAG_SYSCALLRET,
+ "return from system call"},
+ {PERF_IP_FLAG_BRANCH | PERF_IP_FLAG_ASYNC, "asynchronous branch"},
+ {PERF_IP_FLAG_BRANCH | PERF_IP_FLAG_CALL | PERF_IP_FLAG_ASYNC |
+ PERF_IP_FLAG_INTERRUPT, "hardware interrupt"},
+ {PERF_IP_FLAG_BRANCH | PERF_IP_FLAG_TX_ABORT, "transaction abort"},
+ {PERF_IP_FLAG_BRANCH | PERF_IP_FLAG_TRACE_BEGIN, "trace begin"},
+ {PERF_IP_FLAG_BRANCH | PERF_IP_FLAG_TRACE_END, "trace end"},
+ {0, NULL}
+};
+
+int db_export__branch_types(struct db_export *dbe)
+{
+ int i, err = 0;
+
+ for (i = 0; branch_types[i].name ; i++) {
+ err = db_export__branch_type(dbe, branch_types[i].branch_type,
+ branch_types[i].name);
+ if (err)
+ break;
+ }
+ return err;
+}
+
+int db_export__call_path(struct db_export *dbe, struct call_path *cp)
+{
+ int err;
+
+ if (cp->db_id)
+ return 0;
+
+ if (cp->parent) {
+ err = db_export__call_path(dbe, cp->parent);
+ if (err)
+ return err;
+ }
+
+ cp->db_id = ++dbe->call_path_last_db_id;
+
+ if (dbe->export_call_path)
+ return dbe->export_call_path(dbe, cp);
+
+ return 0;
+}
+
+int db_export__call_return(struct db_export *dbe, struct call_return *cr)
+{
+ int err;
+
+ if (cr->db_id)
+ return 0;
+
+ err = db_export__call_path(dbe, cr->cp);
+ if (err)
+ return err;
+
+ cr->db_id = ++dbe->call_return_last_db_id;
+
+ if (dbe->export_call_return)
+ return dbe->export_call_return(dbe, cr);
+
+ return 0;
+}
--- /dev/null
+/*
+ * db-export.h: Support for exporting data suitable for import to a database
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#ifndef __PERF_DB_EXPORT_H
+#define __PERF_DB_EXPORT_H
+
+#include <linux/types.h>
+#include <linux/list.h>
+
+struct perf_evsel;
+struct machine;
+struct thread;
+struct comm;
+struct dso;
+struct perf_sample;
+struct addr_location;
+struct call_return_processor;
+struct call_path;
+struct call_return;
+
+struct export_sample {
+ union perf_event *event;
+ struct perf_sample *sample;
+ struct perf_evsel *evsel;
+ struct thread *thread;
+ struct addr_location *al;
+ u64 db_id;
+ u64 comm_db_id;
+ u64 dso_db_id;
+ u64 sym_db_id;
+ u64 offset; /* ip offset from symbol start */
+ u64 addr_dso_db_id;
+ u64 addr_sym_db_id;
+ u64 addr_offset; /* addr offset from symbol start */
+};
+
+struct db_export {
+ int (*export_evsel)(struct db_export *dbe, struct perf_evsel *evsel);
+ int (*export_machine)(struct db_export *dbe, struct machine *machine);
+ int (*export_thread)(struct db_export *dbe, struct thread *thread,
+ u64 main_thread_db_id, struct machine *machine);
+ int (*export_comm)(struct db_export *dbe, struct comm *comm);
+ int (*export_comm_thread)(struct db_export *dbe, u64 db_id,
+ struct comm *comm, struct thread *thread);
+ int (*export_dso)(struct db_export *dbe, struct dso *dso,
+ struct machine *machine);
+ int (*export_symbol)(struct db_export *dbe, struct symbol *sym,
+ struct dso *dso);
+ int (*export_branch_type)(struct db_export *dbe, u32 branch_type,
+ const char *name);
+ int (*export_sample)(struct db_export *dbe, struct export_sample *es);
+ int (*export_call_path)(struct db_export *dbe, struct call_path *cp);
+ int (*export_call_return)(struct db_export *dbe,
+ struct call_return *cr);
+ struct call_return_processor *crp;
+ u64 evsel_last_db_id;
+ u64 machine_last_db_id;
+ u64 thread_last_db_id;
+ u64 comm_last_db_id;
+ u64 comm_thread_last_db_id;
+ u64 dso_last_db_id;
+ u64 symbol_last_db_id;
+ u64 sample_last_db_id;
+ u64 call_path_last_db_id;
+ u64 call_return_last_db_id;
+ struct list_head deferred;
+};
+
+int db_export__init(struct db_export *dbe);
+int db_export__flush(struct db_export *dbe);
+void db_export__exit(struct db_export *dbe);
+int db_export__evsel(struct db_export *dbe, struct perf_evsel *evsel);
+int db_export__machine(struct db_export *dbe, struct machine *machine);
+int db_export__thread(struct db_export *dbe, struct thread *thread,
+ struct machine *machine, struct comm *comm);
+int db_export__comm(struct db_export *dbe, struct comm *comm,
+ struct thread *main_thread);
+int db_export__comm_thread(struct db_export *dbe, struct comm *comm,
+ struct thread *thread);
+int db_export__dso(struct db_export *dbe, struct dso *dso,
+ struct machine *machine);
+int db_export__symbol(struct db_export *dbe, struct symbol *sym,
+ struct dso *dso);
+int db_export__branch_type(struct db_export *dbe, u32 branch_type,
+ const char *name);
+int db_export__sample(struct db_export *dbe, union perf_event *event,
+ struct perf_sample *sample, struct perf_evsel *evsel,
+ struct thread *thread, struct addr_location *al);
+
+int db_export__branch_types(struct db_export *dbe);
+
+int db_export__call_path(struct db_export *dbe, struct call_path *cp);
+int db_export__call_return(struct db_export *dbe, struct call_return *cr);
+
+#endif
int verbose;
bool dump_trace = false, quiet = false;
int debug_ordered_events;
+static int redirect_to_stderr;
static int _eprintf(int level, int var, const char *fmt, va_list args)
{
int ret = 0;
if (var >= level) {
- if (use_browser >= 1)
+ if (use_browser >= 1 && !redirect_to_stderr)
ui_helpline__vshow(fmt, args);
else
ret = vfprintf(stderr, fmt, args);
} debug_variables[] = {
{ .name = "verbose", .ptr = &verbose },
{ .name = "ordered-events", .ptr = &debug_ordered_events},
+ { .name = "stderr", .ptr = &redirect_to_stderr},
{ .name = NULL, }
};
[DSO_BINARY_TYPE__BUILDID_DEBUGINFO] = 'b',
[DSO_BINARY_TYPE__SYSTEM_PATH_DSO] = 'd',
[DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE] = 'K',
+ [DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE_COMP] = 'm',
[DSO_BINARY_TYPE__GUEST_KALLSYMS] = 'g',
[DSO_BINARY_TYPE__GUEST_KMODULE] = 'G',
+ [DSO_BINARY_TYPE__GUEST_KMODULE_COMP] = 'M',
[DSO_BINARY_TYPE__GUEST_VMLINUX] = 'V',
};
break;
case DSO_BINARY_TYPE__GUEST_KMODULE:
+ case DSO_BINARY_TYPE__GUEST_KMODULE_COMP:
path__join3(filename, size, symbol_conf.symfs,
root_dir, dso->long_name);
break;
case DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE:
+ case DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE_COMP:
__symbol__join_symfs(filename, size, dso->long_name);
break;
return ret;
}
+static const struct {
+ const char *fmt;
+ int (*decompress)(const char *input, int output);
+} compressions[] = {
+#ifdef HAVE_ZLIB_SUPPORT
+ { "gz", gzip_decompress_to_file },
+#endif
+ { NULL, NULL },
+};
+
+bool is_supported_compression(const char *ext)
+{
+ unsigned i;
+
+ for (i = 0; compressions[i].fmt; i++) {
+ if (!strcmp(ext, compressions[i].fmt))
+ return true;
+ }
+ return false;
+}
+
+bool is_kmodule_extension(const char *ext)
+{
+ if (strncmp(ext, "ko", 2))
+ return false;
+
+ if (ext[2] == '\0' || (ext[2] == '.' && is_supported_compression(ext+3)))
+ return true;
+
+ return false;
+}
+
+bool is_kernel_module(const char *pathname, bool *compressed)
+{
+ const char *ext = strrchr(pathname, '.');
+
+ if (ext == NULL)
+ return false;
+
+ if (is_supported_compression(ext + 1)) {
+ if (compressed)
+ *compressed = true;
+ ext -= 3;
+ } else if (compressed)
+ *compressed = false;
+
+ return is_kmodule_extension(ext + 1);
+}
+
+bool decompress_to_file(const char *ext, const char *filename, int output_fd)
+{
+ unsigned i;
+
+ for (i = 0; compressions[i].fmt; i++) {
+ if (!strcmp(ext, compressions[i].fmt))
+ return !compressions[i].decompress(filename,
+ output_fd);
+ }
+ return false;
+}
+
+bool dso__needs_decompress(struct dso *dso)
+{
+ return dso->symtab_type == DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE_COMP ||
+ dso->symtab_type == DSO_BINARY_TYPE__GUEST_KMODULE_COMP;
+}
+
/*
* Global list of open DSOs and the counter.
*/
DSO_BINARY_TYPE__BUILDID_DEBUGINFO,
DSO_BINARY_TYPE__SYSTEM_PATH_DSO,
DSO_BINARY_TYPE__GUEST_KMODULE,
+ DSO_BINARY_TYPE__GUEST_KMODULE_COMP,
DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE,
+ DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE_COMP,
DSO_BINARY_TYPE__KCORE,
DSO_BINARY_TYPE__GUEST_KCORE,
DSO_BINARY_TYPE__OPENEMBEDDED_DEBUGINFO,
const char *long_name;
u16 long_name_len;
u16 short_name_len;
+ void *dwfl; /* DWARF debug info */
/* dso data file */
struct {
struct list_head open_entry;
} data;
+ union { /* Tool specific area */
+ void *priv;
+ u64 db_id;
+ };
+
char name[0];
};
char dso__symtab_origin(const struct dso *dso);
int dso__read_binary_type_filename(const struct dso *dso, enum dso_binary_type type,
char *root_dir, char *filename, size_t size);
+bool is_supported_compression(const char *ext);
+bool is_kmodule_extension(const char *ext);
+bool is_kernel_module(const char *pathname, bool *compressed);
+bool decompress_to_file(const char *ext, const char *filename, int output_fd);
+bool dso__needs_decompress(struct dso *dso);
/*
* The dso__data_* external interface provides following functions:
[PERF_RECORD_HEADER_TRACING_DATA] = "TRACING_DATA",
[PERF_RECORD_HEADER_BUILD_ID] = "BUILD_ID",
[PERF_RECORD_FINISHED_ROUND] = "FINISHED_ROUND",
+ [PERF_RECORD_ID_INDEX] = "ID_INDEX",
};
const char *perf_event__name(unsigned int id)
return machine__process_event(machine, event, sample);
}
-void thread__find_addr_map(struct thread *thread,
- struct machine *machine, u8 cpumode,
+void thread__find_addr_map(struct thread *thread, u8 cpumode,
enum map_type type, u64 addr,
struct addr_location *al)
{
struct map_groups *mg = thread->mg;
+ struct machine *machine = mg->machine;
bool load_map = false;
al->machine = machine;
}
}
-void thread__find_addr_location(struct thread *thread, struct machine *machine,
+void thread__find_addr_location(struct thread *thread,
u8 cpumode, enum map_type type, u64 addr,
struct addr_location *al)
{
- thread__find_addr_map(thread, machine, cpumode, type, addr, al);
+ thread__find_addr_map(thread, cpumode, type, addr, al);
if (al->map != NULL)
al->sym = map__find_symbol(al->map, al->addr,
- machine->symbol_filter);
+ thread->mg->machine->symbol_filter);
else
al->sym = NULL;
}
machine->vmlinux_maps[MAP__FUNCTION] == NULL)
machine__create_kernel_maps(machine);
- thread__find_addr_map(thread, machine, cpumode, MAP__FUNCTION,
- sample->ip, al);
+ thread__find_addr_map(thread, cpumode, MAP__FUNCTION, sample->ip, al);
dump_printf(" ...... dso: %s\n",
al->map ? al->map->dso->long_name :
al->level == 'H' ? "[hypervisor]" : "<not found>");
void perf_event__preprocess_sample_addr(union perf_event *event,
struct perf_sample *sample,
- struct machine *machine,
struct thread *thread,
struct addr_location *al)
{
u8 cpumode = event->header.misc & PERF_RECORD_MISC_CPUMODE_MASK;
- thread__find_addr_map(thread, machine, cpumode, MAP__FUNCTION,
- sample->addr, al);
+ thread__find_addr_map(thread, cpumode, MAP__FUNCTION, sample->addr, al);
if (!al->map)
- thread__find_addr_map(thread, machine, cpumode, MAP__VARIABLE,
+ thread__find_addr_map(thread, cpumode, MAP__VARIABLE,
sample->addr, al);
al->cpu = sample->cpu;
struct branch_entry entries[0];
};
+enum {
+ PERF_IP_FLAG_BRANCH = 1ULL << 0,
+ PERF_IP_FLAG_CALL = 1ULL << 1,
+ PERF_IP_FLAG_RETURN = 1ULL << 2,
+ PERF_IP_FLAG_CONDITIONAL = 1ULL << 3,
+ PERF_IP_FLAG_SYSCALLRET = 1ULL << 4,
+ PERF_IP_FLAG_ASYNC = 1ULL << 5,
+ PERF_IP_FLAG_INTERRUPT = 1ULL << 6,
+ PERF_IP_FLAG_TX_ABORT = 1ULL << 7,
+ PERF_IP_FLAG_TRACE_BEGIN = 1ULL << 8,
+ PERF_IP_FLAG_TRACE_END = 1ULL << 9,
+ PERF_IP_FLAG_IN_TX = 1ULL << 10,
+};
+
+#define PERF_BRANCH_MASK (\
+ PERF_IP_FLAG_BRANCH |\
+ PERF_IP_FLAG_CALL |\
+ PERF_IP_FLAG_RETURN |\
+ PERF_IP_FLAG_CONDITIONAL |\
+ PERF_IP_FLAG_SYSCALLRET |\
+ PERF_IP_FLAG_ASYNC |\
+ PERF_IP_FLAG_INTERRUPT |\
+ PERF_IP_FLAG_TX_ABORT |\
+ PERF_IP_FLAG_TRACE_BEGIN |\
+ PERF_IP_FLAG_TRACE_END)
+
struct perf_sample {
u64 ip;
u32 pid, tid;
struct ip_callchain *callchain;
struct branch_stack *branch_stack;
struct regs_dump user_regs;
+ struct regs_dump intr_regs;
struct stack_dump user_stack;
struct sample_read read;
};
PERF_RECORD_HEADER_TRACING_DATA = 66,
PERF_RECORD_HEADER_BUILD_ID = 67,
PERF_RECORD_FINISHED_ROUND = 68,
+ PERF_RECORD_ID_INDEX = 69,
PERF_RECORD_HEADER_MAX
};
u32 nr_invalid_chains;
u32 nr_unknown_id;
u32 nr_unprocessable_samples;
+ u32 nr_unordered_events;
};
struct attr_event {
u32 size;
};
+struct id_index_entry {
+ u64 id;
+ u64 idx;
+ u64 cpu;
+ u64 tid;
+};
+
+struct id_index_event {
+ struct perf_event_header header;
+ u64 nr;
+ struct id_index_entry entries[0];
+};
+
union perf_event {
struct perf_event_header header;
struct mmap_event mmap;
struct event_type_event event_type;
struct tracing_data_event tracing_data;
struct build_id_event build_id;
+ struct id_index_event id_index;
};
void perf_event__print_totals(void);
bool sample_addr_correlates_sym(struct perf_event_attr *attr);
void perf_event__preprocess_sample_addr(union perf_event *event,
struct perf_sample *sample,
- struct machine *machine,
struct thread *thread,
struct addr_location *al);
int nfds = 0;
struct perf_evsel *evsel;
- list_for_each_entry(evsel, &evlist->entries, node) {
+ evlist__for_each(evlist, evsel) {
if (evsel->system_wide)
nfds += nr_cpus;
else
return 0;
}
+static void perf_evlist__set_sid_idx(struct perf_evlist *evlist,
+ struct perf_evsel *evsel, int idx, int cpu,
+ int thread)
+{
+ struct perf_sample_id *sid = SID(evsel, cpu, thread);
+ sid->idx = idx;
+ if (evlist->cpus && cpu >= 0)
+ sid->cpu = evlist->cpus->map[cpu];
+ else
+ sid->cpu = -1;
+ if (!evsel->system_wide && evlist->threads && thread >= 0)
+ sid->tid = evlist->threads->map[thread];
+ else
+ sid->tid = -1;
+}
+
struct perf_sample_id *perf_evlist__id2sid(struct perf_evlist *evlist, u64 id)
{
struct hlist_head *head;
perf_evlist__mmap_get(evlist, idx);
}
- if (__perf_evlist__add_pollfd(evlist, fd, idx) < 0) {
+ /*
+ * The system_wide flag causes a selected event to be opened
+ * always without a pid. Consequently it will never get a
+ * POLLHUP, but it is used for tracking in combination with
+ * other events, so it should not need to be polled anyway.
+ * Therefore don't add it for polling.
+ */
+ if (!evsel->system_wide &&
+ __perf_evlist__add_pollfd(evlist, fd, idx) < 0) {
perf_evlist__mmap_put(evlist, idx);
return -1;
}
- if ((evsel->attr.read_format & PERF_FORMAT_ID) &&
- perf_evlist__id_add_fd(evlist, evsel, cpu, thread, fd) < 0)
- return -1;
+ if (evsel->attr.read_format & PERF_FORMAT_ID) {
+ if (perf_evlist__id_add_fd(evlist, evsel, cpu, thread,
+ fd) < 0)
+ return -1;
+ perf_evlist__set_sid_idx(evlist, evsel, idx, cpu,
+ thread);
+ }
}
return 0;
attr->mmap_data = track;
}
+ /*
+ * We don't allow user space callchains for function trace
+ * event, due to issues with page faults while tracing page
+ * fault handler and its overall trickiness nature.
+ */
+ if (perf_evsel__is_function_event(evsel))
+ evsel->attr.exclude_callchain_user = 1;
+
if (callchain_param.enabled && !evsel->no_aux_samples)
perf_evsel__config_callgraph(evsel);
+ if (opts->sample_intr_regs) {
+ attr->sample_regs_intr = PERF_REGS_MASK;
+ perf_evsel__set_sample_bit(evsel, REGS_INTR);
+ }
+
if (target__has_cpu(&opts->target))
perf_evsel__set_sample_bit(evsel, CPU);
perf_evsel__free_id(evsel);
close_cgroup(evsel->cgrp);
zfree(&evsel->group_name);
- if (evsel->tp_format)
- pevent_free_format(evsel->tp_format);
zfree(&evsel->name);
perf_evsel__object.fini(evsel);
}
free(evsel);
}
-static inline void compute_deltas(struct perf_evsel *evsel,
- int cpu,
- struct perf_counts_values *count)
+void perf_evsel__compute_deltas(struct perf_evsel *evsel, int cpu,
+ struct perf_counts_values *count)
{
struct perf_counts_values tmp;
count->run = count->run - tmp.run;
}
-int __perf_evsel__read_on_cpu(struct perf_evsel *evsel,
- int cpu, int thread, bool scale)
+void perf_counts_values__scale(struct perf_counts_values *count,
+ bool scale, s8 *pscaled)
{
- struct perf_counts_values count;
- size_t nv = scale ? 3 : 1;
-
- if (FD(evsel, cpu, thread) < 0)
- return -EINVAL;
-
- if (evsel->counts == NULL && perf_evsel__alloc_counts(evsel, cpu + 1) < 0)
- return -ENOMEM;
-
- if (readn(FD(evsel, cpu, thread), &count, nv * sizeof(u64)) < 0)
- return -errno;
-
- compute_deltas(evsel, cpu, &count);
+ s8 scaled = 0;
if (scale) {
- if (count.run == 0)
- count.val = 0;
- else if (count.run < count.ena)
- count.val = (u64)((double)count.val * count.ena / count.run + 0.5);
+ if (count->run == 0) {
+ scaled = -1;
+ count->val = 0;
+ } else if (count->run < count->ena) {
+ scaled = 1;
+ count->val = (u64)((double) count->val * count->ena / count->run + 0.5);
+ }
} else
- count.ena = count.run = 0;
+ count->ena = count->run = 0;
- evsel->counts->cpu[cpu] = count;
- return 0;
+ if (pscaled)
+ *pscaled = scaled;
}
-int __perf_evsel__read(struct perf_evsel *evsel,
- int ncpus, int nthreads, bool scale)
+int perf_evsel__read_cb(struct perf_evsel *evsel, int cpu, int thread,
+ perf_evsel__read_cb_t cb)
{
- size_t nv = scale ? 3 : 1;
- int cpu, thread;
- struct perf_counts_values *aggr = &evsel->counts->aggr, count;
+ struct perf_counts_values count;
- if (evsel->system_wide)
- nthreads = 1;
+ memset(&count, 0, sizeof(count));
- aggr->val = aggr->ena = aggr->run = 0;
+ if (FD(evsel, cpu, thread) < 0)
+ return -EINVAL;
- for (cpu = 0; cpu < ncpus; cpu++) {
- for (thread = 0; thread < nthreads; thread++) {
- if (FD(evsel, cpu, thread) < 0)
- continue;
+ if (readn(FD(evsel, cpu, thread), &count, sizeof(count)) < 0)
+ return -errno;
- if (readn(FD(evsel, cpu, thread),
- &count, nv * sizeof(u64)) < 0)
- return -errno;
+ return cb(evsel, cpu, thread, &count);
+}
- aggr->val += count.val;
- if (scale) {
- aggr->ena += count.ena;
- aggr->run += count.run;
- }
- }
- }
+int __perf_evsel__read_on_cpu(struct perf_evsel *evsel,
+ int cpu, int thread, bool scale)
+{
+ struct perf_counts_values count;
+ size_t nv = scale ? 3 : 1;
- compute_deltas(evsel, -1, aggr);
+ if (FD(evsel, cpu, thread) < 0)
+ return -EINVAL;
- evsel->counts->scaled = 0;
- if (scale) {
- if (aggr->run == 0) {
- evsel->counts->scaled = -1;
- aggr->val = 0;
- return 0;
- }
+ if (evsel->counts == NULL && perf_evsel__alloc_counts(evsel, cpu + 1) < 0)
+ return -ENOMEM;
- if (aggr->run < aggr->ena) {
- evsel->counts->scaled = 1;
- aggr->val = (u64)((double)aggr->val * aggr->ena / aggr->run + 0.5);
- }
- } else
- aggr->ena = aggr->run = 0;
+ if (readn(FD(evsel, cpu, thread), &count, nv * sizeof(u64)) < 0)
+ return -errno;
+ perf_evsel__compute_deltas(evsel, cpu, &count);
+ perf_counts_values__scale(&count, scale, NULL);
+ evsel->counts->cpu[cpu] = count;
return 0;
}
ret += PRINT_ATTR_X64(branch_sample_type);
ret += PRINT_ATTR_X64(sample_regs_user);
ret += PRINT_ATTR_U32(sample_stack_user);
+ ret += PRINT_ATTR_X64(sample_regs_intr);
ret += fprintf(fp, "%.60s\n", graph_dotted_line);
array++;
}
+ data->intr_regs.abi = PERF_SAMPLE_REGS_ABI_NONE;
+ if (type & PERF_SAMPLE_REGS_INTR) {
+ OVERFLOW_CHECK_u64(array);
+ data->intr_regs.abi = *array;
+ array++;
+
+ if (data->intr_regs.abi != PERF_SAMPLE_REGS_ABI_NONE) {
+ u64 mask = evsel->attr.sample_regs_intr;
+
+ sz = hweight_long(mask) * sizeof(u64);
+ OVERFLOW_CHECK(array, sz, max_size);
+ data->intr_regs.mask = mask;
+ data->intr_regs.regs = (u64 *)array;
+ array = (void *)array + sz;
+ }
+ }
+
return 0;
}
if (type & PERF_SAMPLE_TRANSACTION)
result += sizeof(u64);
+ if (type & PERF_SAMPLE_REGS_INTR) {
+ if (sample->intr_regs.abi) {
+ result += sizeof(u64);
+ sz = hweight_long(sample->intr_regs.mask) * sizeof(u64);
+ result += sz;
+ } else {
+ result += sizeof(u64);
+ }
+ }
+
return result;
}
array++;
}
+ if (type & PERF_SAMPLE_REGS_INTR) {
+ if (sample->intr_regs.abi) {
+ *array++ = sample->intr_regs.abi;
+ sz = hweight_long(sample->intr_regs.mask) * sizeof(u64);
+ memcpy(array, sample->intr_regs.regs, sz);
+ array = (void *)array + sz;
+ } else {
+ *array++ = 0;
+ }
+ }
+
return 0;
}
bit_name(READ), bit_name(CALLCHAIN), bit_name(ID), bit_name(CPU),
bit_name(PERIOD), bit_name(STREAM_ID), bit_name(RAW),
bit_name(BRANCH_STACK), bit_name(REGS_USER), bit_name(STACK_USER),
- bit_name(IDENTIFIER),
+ bit_name(IDENTIFIER), bit_name(REGS_INTR),
{ .name = NULL, }
};
#undef bit_name
struct hlist_node node;
u64 id;
struct perf_evsel *evsel;
+ int idx;
+ int cpu;
+ pid_t tid;
/* Holds total ID period value for PERF_SAMPLE_READ processing. */
u64 period;
* @is_pos: the position (counting backwards) of the event id (PERF_SAMPLE_ID or
* PERF_SAMPLE_IDENTIFIER) in a non-sample event i.e. if sample_id_all
* is used there is an id sample appended to non-sample events
+ * @priv: And what is in its containing unnamed union are tool specific
*/
struct perf_evsel {
struct list_head node;
char *name;
double scale;
const char *unit;
+ bool snapshot;
struct event_format *tp_format;
union {
void *priv;
off_t id_offset;
+ u64 db_id;
};
struct cgroup_sel *cgrp;
void *handler;
bool immediate;
bool system_wide;
bool tracking;
+ bool per_pkg;
+ unsigned long *per_pkg_mask;
/* parse modifier helper */
int exclude_GH;
int nr_members;
struct perf_evlist;
struct record_opts;
+void perf_counts_values__scale(struct perf_counts_values *count,
+ bool scale, s8 *pscaled);
+
+void perf_evsel__compute_deltas(struct perf_evsel *evsel, int cpu,
+ struct perf_counts_values *count);
+
int perf_evsel__object_config(size_t object_size,
int (*init)(struct perf_evsel *evsel),
void (*fini)(struct perf_evsel *evsel));
(a)->attr.type == (b)->attr.type && \
(a)->attr.config == (b)->attr.config)
+typedef int (perf_evsel__read_cb_t)(struct perf_evsel *evsel,
+ int cpu, int thread,
+ struct perf_counts_values *count);
+
+int perf_evsel__read_cb(struct perf_evsel *evsel, int cpu, int thread,
+ perf_evsel__read_cb_t cb);
+
int __perf_evsel__read_on_cpu(struct perf_evsel *evsel,
int cpu, int thread, bool scale);
return __perf_evsel__read_on_cpu(evsel, cpu, thread, true);
}
-int __perf_evsel__read(struct perf_evsel *evsel, int ncpus, int nthreads,
- bool scale);
-
-/**
- * perf_evsel__read - Read the aggregate results on all CPUs
- *
- * @evsel - event selector to read value
- * @ncpus - Number of cpus affected, from zero
- * @nthreads - Number of threads affected, from zero
- */
-static inline int perf_evsel__read(struct perf_evsel *evsel,
- int ncpus, int nthreads)
-{
- return __perf_evsel__read(evsel, ncpus, nthreads, false);
-}
-
-/**
- * perf_evsel__read_scaled - Read the aggregate results on all CPUs, scaled
- *
- * @evsel - event selector to read value
- * @ncpus - Number of cpus affected, from zero
- * @nthreads - Number of threads affected, from zero
- */
-static inline int perf_evsel__read_scaled(struct perf_evsel *evsel,
- int ncpus, int nthreads)
-{
- return __perf_evsel__read(evsel, ncpus, nthreads, true);
-}
-
int perf_evsel__parse_sample(struct perf_evsel *evsel, union perf_event *event,
struct perf_sample *sample);
--- /dev/null
+static int find_vdso_map(void **start, void **end)
+{
+ FILE *maps;
+ char line[128];
+ int found = 0;
+
+ maps = fopen("/proc/self/maps", "r");
+ if (!maps) {
+ fprintf(stderr, "vdso: cannot open maps\n");
+ return -1;
+ }
+
+ while (!found && fgets(line, sizeof(line), maps)) {
+ int m = -1;
+
+ /* We care only about private r-x mappings. */
+ if (2 != sscanf(line, "%p-%p r-xp %*x %*x:%*x %*u %n",
+ start, end, &m))
+ continue;
+ if (m < 0)
+ continue;
+
+ if (!strncmp(&line[m], VDSO__MAP_NAME,
+ sizeof(VDSO__MAP_NAME) - 1))
+ found = 1;
+ }
+
+ fclose(maps);
+ return !found;
+}
#include "build-id.h"
#include "data.h"
-static bool no_buildid_cache = false;
-
static u32 header_argc;
static const char **header_argv;
return 0;
}
-#define NAME_ALIGN 64
-
-static int write_padded(int fd, const void *bf, size_t count,
- size_t count_aligned)
+int write_padded(int fd, const void *bf, size_t count, size_t count_aligned)
{
static const char zero_buf[NAME_ALIGN];
int err = do_write(fd, bf, count);
return 0;
}
-#define dsos__for_each_with_build_id(pos, head) \
- list_for_each_entry(pos, head, node) \
- if (!pos->has_build_id) \
- continue; \
- else
-
-static int write_buildid(const char *name, size_t name_len, u8 *build_id,
- pid_t pid, u16 misc, int fd)
-{
- int err;
- struct build_id_event b;
- size_t len;
-
- len = name_len + 1;
- len = PERF_ALIGN(len, NAME_ALIGN);
-
- memset(&b, 0, sizeof(b));
- memcpy(&b.build_id, build_id, BUILD_ID_SIZE);
- b.pid = pid;
- b.header.misc = misc;
- b.header.size = sizeof(b) + len;
-
- err = do_write(fd, &b, sizeof(b));
- if (err < 0)
- return err;
-
- return write_padded(fd, name, name_len + 1, len);
-}
-
-static int __dsos__hit_all(struct list_head *head)
-{
- struct dso *pos;
-
- list_for_each_entry(pos, head, node)
- pos->hit = true;
-
- return 0;
-}
-
-static int machine__hit_all_dsos(struct machine *machine)
-{
- int err;
-
- err = __dsos__hit_all(&machine->kernel_dsos.head);
- if (err)
- return err;
-
- return __dsos__hit_all(&machine->user_dsos.head);
-}
-
-int dsos__hit_all(struct perf_session *session)
-{
- struct rb_node *nd;
- int err;
-
- err = machine__hit_all_dsos(&session->machines.host);
- if (err)
- return err;
-
- for (nd = rb_first(&session->machines.guests); nd; nd = rb_next(nd)) {
- struct machine *pos = rb_entry(nd, struct machine, rb_node);
-
- err = machine__hit_all_dsos(pos);
- if (err)
- return err;
- }
-
- return 0;
-}
-
-static int __dsos__write_buildid_table(struct list_head *head,
- struct machine *machine,
- pid_t pid, u16 misc, int fd)
-{
- char nm[PATH_MAX];
- struct dso *pos;
-
- dsos__for_each_with_build_id(pos, head) {
- int err;
- const char *name;
- size_t name_len;
-
- if (!pos->hit)
- continue;
-
- if (dso__is_vdso(pos)) {
- name = pos->short_name;
- name_len = pos->short_name_len + 1;
- } else if (dso__is_kcore(pos)) {
- machine__mmap_name(machine, nm, sizeof(nm));
- name = nm;
- name_len = strlen(nm) + 1;
- } else {
- name = pos->long_name;
- name_len = pos->long_name_len + 1;
- }
-
- err = write_buildid(name, name_len, pos->build_id,
- pid, misc, fd);
- if (err)
- return err;
- }
-
- return 0;
-}
-
-static int machine__write_buildid_table(struct machine *machine, int fd)
-{
- int err;
- u16 kmisc = PERF_RECORD_MISC_KERNEL,
- umisc = PERF_RECORD_MISC_USER;
-
- if (!machine__is_host(machine)) {
- kmisc = PERF_RECORD_MISC_GUEST_KERNEL;
- umisc = PERF_RECORD_MISC_GUEST_USER;
- }
-
- err = __dsos__write_buildid_table(&machine->kernel_dsos.head, machine,
- machine->pid, kmisc, fd);
- if (err == 0)
- err = __dsos__write_buildid_table(&machine->user_dsos.head,
- machine, machine->pid, umisc,
- fd);
- return err;
-}
-
-static int dsos__write_buildid_table(struct perf_header *header, int fd)
-{
- struct perf_session *session = container_of(header,
- struct perf_session, header);
- struct rb_node *nd;
- int err = machine__write_buildid_table(&session->machines.host, fd);
-
- if (err)
- return err;
-
- for (nd = rb_first(&session->machines.guests); nd; nd = rb_next(nd)) {
- struct machine *pos = rb_entry(nd, struct machine, rb_node);
- err = machine__write_buildid_table(pos, fd);
- if (err)
- break;
- }
- return err;
-}
-
-int build_id_cache__add_s(const char *sbuild_id, const char *debugdir,
- const char *name, bool is_kallsyms, bool is_vdso)
-{
- const size_t size = PATH_MAX;
- char *realname, *filename = zalloc(size),
- *linkname = zalloc(size), *targetname;
- int len, err = -1;
- bool slash = is_kallsyms || is_vdso;
-
- if (is_kallsyms) {
- if (symbol_conf.kptr_restrict) {
- pr_debug("Not caching a kptr_restrict'ed /proc/kallsyms\n");
- err = 0;
- goto out_free;
- }
- realname = (char *) name;
- } else
- realname = realpath(name, NULL);
-
- if (realname == NULL || filename == NULL || linkname == NULL)
- goto out_free;
-
- len = scnprintf(filename, size, "%s%s%s",
- debugdir, slash ? "/" : "",
- is_vdso ? DSO__NAME_VDSO : realname);
- if (mkdir_p(filename, 0755))
- goto out_free;
-
- snprintf(filename + len, size - len, "/%s", sbuild_id);
-
- if (access(filename, F_OK)) {
- if (is_kallsyms) {
- if (copyfile("/proc/kallsyms", filename))
- goto out_free;
- } else if (link(realname, filename) && copyfile(name, filename))
- goto out_free;
- }
-
- len = scnprintf(linkname, size, "%s/.build-id/%.2s",
- debugdir, sbuild_id);
-
- if (access(linkname, X_OK) && mkdir_p(linkname, 0755))
- goto out_free;
-
- snprintf(linkname + len, size - len, "/%s", sbuild_id + 2);
- targetname = filename + strlen(debugdir) - 5;
- memcpy(targetname, "../..", 5);
-
- if (symlink(targetname, linkname) == 0)
- err = 0;
-out_free:
- if (!is_kallsyms)
- free(realname);
- free(filename);
- free(linkname);
- return err;
-}
-
-static int build_id_cache__add_b(const u8 *build_id, size_t build_id_size,
- const char *name, const char *debugdir,
- bool is_kallsyms, bool is_vdso)
-{
- char sbuild_id[BUILD_ID_SIZE * 2 + 1];
-
- build_id__sprintf(build_id, build_id_size, sbuild_id);
-
- return build_id_cache__add_s(sbuild_id, debugdir, name,
- is_kallsyms, is_vdso);
-}
-
-int build_id_cache__remove_s(const char *sbuild_id, const char *debugdir)
-{
- const size_t size = PATH_MAX;
- char *filename = zalloc(size),
- *linkname = zalloc(size);
- int err = -1;
-
- if (filename == NULL || linkname == NULL)
- goto out_free;
-
- snprintf(linkname, size, "%s/.build-id/%.2s/%s",
- debugdir, sbuild_id, sbuild_id + 2);
-
- if (access(linkname, F_OK))
- goto out_free;
-
- if (readlink(linkname, filename, size - 1) < 0)
- goto out_free;
-
- if (unlink(linkname))
- goto out_free;
-
- /*
- * Since the link is relative, we must make it absolute:
- */
- snprintf(linkname, size, "%s/.build-id/%.2s/%s",
- debugdir, sbuild_id, filename);
-
- if (unlink(linkname))
- goto out_free;
-
- err = 0;
-out_free:
- free(filename);
- free(linkname);
- return err;
-}
-
-static int dso__cache_build_id(struct dso *dso, struct machine *machine,
- const char *debugdir)
-{
- bool is_kallsyms = dso->kernel && dso->long_name[0] != '/';
- bool is_vdso = dso__is_vdso(dso);
- const char *name = dso->long_name;
- char nm[PATH_MAX];
-
- if (dso__is_kcore(dso)) {
- is_kallsyms = true;
- machine__mmap_name(machine, nm, sizeof(nm));
- name = nm;
- }
- return build_id_cache__add_b(dso->build_id, sizeof(dso->build_id), name,
- debugdir, is_kallsyms, is_vdso);
-}
-
-static int __dsos__cache_build_ids(struct list_head *head,
- struct machine *machine, const char *debugdir)
-{
- struct dso *pos;
- int err = 0;
-
- dsos__for_each_with_build_id(pos, head)
- if (dso__cache_build_id(pos, machine, debugdir))
- err = -1;
-
- return err;
-}
-
-static int machine__cache_build_ids(struct machine *machine, const char *debugdir)
-{
- int ret = __dsos__cache_build_ids(&machine->kernel_dsos.head, machine,
- debugdir);
- ret |= __dsos__cache_build_ids(&machine->user_dsos.head, machine,
- debugdir);
- return ret;
-}
-
-static int perf_session__cache_build_ids(struct perf_session *session)
-{
- struct rb_node *nd;
- int ret;
- char debugdir[PATH_MAX];
-
- snprintf(debugdir, sizeof(debugdir), "%s", buildid_dir);
-
- if (mkdir(debugdir, 0755) != 0 && errno != EEXIST)
- return -1;
-
- ret = machine__cache_build_ids(&session->machines.host, debugdir);
-
- for (nd = rb_first(&session->machines.guests); nd; nd = rb_next(nd)) {
- struct machine *pos = rb_entry(nd, struct machine, rb_node);
- ret |= machine__cache_build_ids(pos, debugdir);
- }
- return ret ? -1 : 0;
-}
-
-static bool machine__read_build_ids(struct machine *machine, bool with_hits)
-{
- bool ret;
-
- ret = __dsos__read_build_ids(&machine->kernel_dsos.head, with_hits);
- ret |= __dsos__read_build_ids(&machine->user_dsos.head, with_hits);
- return ret;
-}
-
-static bool perf_session__read_build_ids(struct perf_session *session, bool with_hits)
-{
- struct rb_node *nd;
- bool ret = machine__read_build_ids(&session->machines.host, with_hits);
-
- for (nd = rb_first(&session->machines.guests); nd; nd = rb_next(nd)) {
- struct machine *pos = rb_entry(nd, struct machine, rb_node);
- ret |= machine__read_build_ids(pos, with_hits);
- }
-
- return ret;
-}
-
static int write_tracing_data(int fd, struct perf_header *h __maybe_unused,
struct perf_evlist *evlist)
{
if (!perf_session__read_build_ids(session, true))
return -1;
- err = dsos__write_buildid_table(h, fd);
+ err = perf_session__write_buildid_table(session, fd);
if (err < 0) {
pr_debug("failed to write buildid table\n");
return err;
}
- if (!no_buildid_cache)
- perf_session__cache_build_ids(session);
+ perf_session__cache_build_ids(session);
return 0;
}
return do_write_string(fd, perf_version_string);
}
-static int write_cpudesc(int fd, struct perf_header *h __maybe_unused,
- struct perf_evlist *evlist __maybe_unused)
+static int __write_cpudesc(int fd, const char *cpuinfo_proc)
{
-#ifndef CPUINFO_PROC
-#define CPUINFO_PROC NULL
-#endif
FILE *file;
char *buf = NULL;
char *s, *p;
- const char *search = CPUINFO_PROC;
+ const char *search = cpuinfo_proc;
size_t len = 0;
int ret = -1;
break;
}
- if (ret)
+ if (ret) {
+ ret = -1;
goto done;
+ }
s = buf;
return ret;
}
+static int write_cpudesc(int fd, struct perf_header *h __maybe_unused,
+ struct perf_evlist *evlist __maybe_unused)
+{
+#ifndef CPUINFO_PROC
+#define CPUINFO_PROC {"model name", }
+#endif
+ const char *cpuinfo_procs[] = CPUINFO_PROC;
+ unsigned int i;
+
+ for (i = 0; i < ARRAY_SIZE(cpuinfo_procs); i++) {
+ int ret;
+ ret = __write_cpudesc(fd, cpuinfo_procs[i]);
+ if (ret >= 0)
+ return ret;
+ }
+ return -1;
+}
+
+
static int write_nrcpus(int fd, struct perf_header *h __maybe_unused,
struct perf_evlist *evlist __maybe_unused)
{
n = sscanf(buf, "%*s %"PRIu64, &mem);
if (n == 1)
ret = do_write(fd, &mem, sizeof(mem));
- }
+ } else
+ ret = -1;
free(buf);
fclose(fp);
return ret;
dso__set_build_id(dso, &bev->build_id);
- if (filename[0] == '[')
+ if (!is_kernel_module(filename, NULL))
dso->kernel = dso_type;
build_id__sprintf(dso->build_id, sizeof(dso->build_id),
[1] = PERF_ATTR_SIZE_VER1,
[2] = PERF_ATTR_SIZE_VER2,
[3] = PERF_ATTR_SIZE_VER3,
+ [4] = PERF_ATTR_SIZE_VER4,
0,
};
session);
return 0;
}
-
-void disable_buildid_cache(void)
-{
- no_buildid_cache = true;
-}
int perf_header__fprintf_info(struct perf_session *s, FILE *fp, bool full);
-int build_id_cache__add_s(const char *sbuild_id, const char *debugdir,
- const char *name, bool is_kallsyms, bool is_vdso);
-int build_id_cache__remove_s(const char *sbuild_id, const char *debugdir);
-
int perf_event__synthesize_attr(struct perf_tool *tool,
struct perf_event_attr *attr, u32 ids, u64 *id,
perf_event__handler_t process);
struct perf_session *session);
bool is_perf_magic(u64 magic);
-int dsos__hit_all(struct perf_session *session);
+#define NAME_ALIGN 64
+
+int write_padded(int fd, const void *bf, size_t count, size_t count_aligned);
/*
* arch specific callback
__bitmap_or(dst, src1, src2, nbits);
}
+/**
+ * test_and_set_bit - Set a bit and return its old value
+ * @nr: Bit to set
+ * @addr: Address to count from
+ */
+static inline int test_and_set_bit(int nr, unsigned long *addr)
+{
+ unsigned long mask = BIT_MASK(nr);
+ unsigned long *p = ((unsigned long *)addr) + BIT_WORD(nr);
+ unsigned long old;
+
+ old = *p;
+ *p = old | mask;
+
+ return (old & mask) != 0;
+}
+
#endif /* _PERF_BITOPS_H */
#define BITS_TO_U64(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(u64))
#define BITS_TO_U32(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE * sizeof(u32))
#define BITS_TO_BYTES(nr) DIV_ROUND_UP(nr, BITS_PER_BYTE)
+#define BIT_WORD(nr) ((nr) / BITS_PER_LONG)
+#define BIT_MASK(nr) (1UL << ((nr) % BITS_PER_LONG))
#define for_each_set_bit(bit, addr, size) \
for ((bit) = find_first_bit((addr), (size)); \
#include <stdbool.h>
#include <symbol/kallsyms.h>
#include "unwind.h"
+#include "linux/hash.h"
static void dsos__init(struct dsos *dsos)
{
int machine__init(struct machine *machine, const char *root_dir, pid_t pid)
{
- map_groups__init(&machine->kmaps);
+ map_groups__init(&machine->kmaps, machine);
RB_CLEAR_NODE(&machine->rb_node);
dsos__init(&machine->user_dsos);
dsos__init(&machine->kernel_dsos);
machine->vdso_info = NULL;
- machine->kmaps.machine = machine;
machine->pid = pid;
machine->symbol_filter = NULL;
goto out_err;
if (!leader->mg)
- leader->mg = map_groups__new();
+ leader->mg = map_groups__new(machine);
if (!leader->mg)
goto out_err;
{
struct map *map;
struct dso *dso = __dsos__findnew(&machine->kernel_dsos, filename);
+ bool compressed;
if (dso == NULL)
return NULL;
dso->symtab_type = DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE;
else
dso->symtab_type = DSO_BINARY_TYPE__GUEST_KMODULE;
+
+ /* _KMODULE_COMP should be next to _KMODULE */
+ if (is_kernel_module(filename, &compressed) && compressed)
+ dso->symtab_type++;
+
map_groups__insert(&machine->kmaps, map);
return map;
}
struct map *map;
char *long_name;
- if (dot == NULL || strcmp(dot, ".ko"))
+ if (dot == NULL)
continue;
+
+ /* On some system, modules are compressed like .ko.gz */
+ if (is_supported_compression(dot + 1) &&
+ is_kmodule_extension(dot - 2))
+ dot -= 3;
+
snprintf(dso_name, sizeof(dso_name), "[%.*s]",
(int)(dot - dent->d_name), dent->d_name);
dot = strrchr(name, '.');
if (dot == NULL)
goto out_problem;
+ /* On some system, modules are compressed like .ko.gz */
+ if (is_supported_compression(dot + 1))
+ dot -= 3;
+ if (!is_kmodule_extension(dot + 1))
+ goto out_problem;
snprintf(short_module_name, sizeof(short_module_name),
"[%.*s]", (int)(dot - name), name);
strxfrchar(short_module_name, '-', '_');
* Should be there already, from the build-id table in
* the header.
*/
- struct dso *kernel = __dsos__findnew(&machine->kernel_dsos,
- kmmap_prefix);
+ struct dso *kernel = NULL;
+ struct dso *dso;
+
+ list_for_each_entry(dso, &machine->kernel_dsos.head, node) {
+ if (is_kernel_module(dso->long_name, NULL))
+ continue;
+
+ kernel = dso;
+ break;
+ }
+
+ if (kernel == NULL)
+ kernel = __dsos__findnew(&machine->kernel_dsos,
+ kmmap_prefix);
if (kernel == NULL)
goto out_problem;
if (__machine__create_kernel_maps(machine, kernel) < 0)
goto out_problem;
+ if (strstr(kernel->long_name, "vmlinux"))
+ dso__set_short_name(kernel, "[kernel.vmlinux]", false);
+
machine__set_kernel_mmap_len(machine, event);
/*
return 0;
}
-static void ip__resolve_ams(struct machine *machine, struct thread *thread,
+static void ip__resolve_ams(struct thread *thread,
struct addr_map_symbol *ams,
u64 ip)
{
* Thus, we have to try consecutively until we find a match
* or else, the symbol is unknown
*/
- thread__find_cpumode_addr_location(thread, machine, MAP__FUNCTION, ip, &al);
+ thread__find_cpumode_addr_location(thread, MAP__FUNCTION, ip, &al);
ams->addr = ip;
ams->al_addr = al.addr;
ams->map = al.map;
}
-static void ip__resolve_data(struct machine *machine, struct thread *thread,
+static void ip__resolve_data(struct thread *thread,
u8 m, struct addr_map_symbol *ams, u64 addr)
{
struct addr_location al;
memset(&al, 0, sizeof(al));
- thread__find_addr_location(thread, machine, m, MAP__VARIABLE, addr,
- &al);
+ thread__find_addr_location(thread, m, MAP__VARIABLE, addr, &al);
if (al.map == NULL) {
/*
* some shared data regions have execute bit set which puts
* their mapping in the MAP__FUNCTION type array.
* Check there as a fallback option before dropping the sample.
*/
- thread__find_addr_location(thread, machine, m, MAP__FUNCTION, addr,
- &al);
+ thread__find_addr_location(thread, m, MAP__FUNCTION, addr, &al);
}
ams->addr = addr;
if (!mi)
return NULL;
- ip__resolve_ams(al->machine, al->thread, &mi->iaddr, sample->ip);
- ip__resolve_data(al->machine, al->thread, al->cpumode,
- &mi->daddr, sample->addr);
+ ip__resolve_ams(al->thread, &mi->iaddr, sample->ip);
+ ip__resolve_data(al->thread, al->cpumode, &mi->daddr, sample->addr);
mi->data_src.val = sample->data_src;
return mi;
}
+static int add_callchain_ip(struct thread *thread,
+ struct symbol **parent,
+ struct addr_location *root_al,
+ int cpumode,
+ u64 ip)
+{
+ struct addr_location al;
+
+ al.filtered = 0;
+ al.sym = NULL;
+ if (cpumode == -1)
+ thread__find_cpumode_addr_location(thread, MAP__FUNCTION,
+ ip, &al);
+ else
+ thread__find_addr_location(thread, cpumode, MAP__FUNCTION,
+ ip, &al);
+ if (al.sym != NULL) {
+ if (sort__has_parent && !*parent &&
+ symbol__match_regex(al.sym, &parent_regex))
+ *parent = al.sym;
+ else if (have_ignore_callees && root_al &&
+ symbol__match_regex(al.sym, &ignore_callees_regex)) {
+ /* Treat this symbol as the root,
+ forgetting its callees. */
+ *root_al = al;
+ callchain_cursor_reset(&callchain_cursor);
+ }
+ }
+
+ return callchain_cursor_append(&callchain_cursor, al.addr, al.map, al.sym);
+}
+
struct branch_info *sample__resolve_bstack(struct perf_sample *sample,
struct addr_location *al)
{
return NULL;
for (i = 0; i < bs->nr; i++) {
- ip__resolve_ams(al->machine, al->thread, &bi[i].to, bs->entries[i].to);
- ip__resolve_ams(al->machine, al->thread, &bi[i].from, bs->entries[i].from);
+ ip__resolve_ams(al->thread, &bi[i].to, bs->entries[i].to);
+ ip__resolve_ams(al->thread, &bi[i].from, bs->entries[i].from);
bi[i].flags = bs->entries[i].flags;
}
return bi;
}
-static int machine__resolve_callchain_sample(struct machine *machine,
- struct thread *thread,
+#define CHASHSZ 127
+#define CHASHBITS 7
+#define NO_ENTRY 0xff
+
+#define PERF_MAX_BRANCH_DEPTH 127
+
+/* Remove loops. */
+static int remove_loops(struct branch_entry *l, int nr)
+{
+ int i, j, off;
+ unsigned char chash[CHASHSZ];
+
+ memset(chash, NO_ENTRY, sizeof(chash));
+
+ BUG_ON(PERF_MAX_BRANCH_DEPTH > 255);
+
+ for (i = 0; i < nr; i++) {
+ int h = hash_64(l[i].from, CHASHBITS) % CHASHSZ;
+
+ /* no collision handling for now */
+ if (chash[h] == NO_ENTRY) {
+ chash[h] = i;
+ } else if (l[chash[h]].from == l[i].from) {
+ bool is_loop = true;
+ /* check if it is a real loop */
+ off = 0;
+ for (j = chash[h]; j < i && i + off < nr; j++, off++)
+ if (l[j].from != l[i + off].from) {
+ is_loop = false;
+ break;
+ }
+ if (is_loop) {
+ memmove(l + i, l + i + off,
+ (nr - (i + off)) * sizeof(*l));
+ nr -= off;
+ }
+ }
+ }
+ return nr;
+}
+
+static int thread__resolve_callchain_sample(struct thread *thread,
struct ip_callchain *chain,
+ struct branch_stack *branch,
struct symbol **parent,
struct addr_location *root_al,
int max_stack)
int i;
int j;
int err;
- int skip_idx __maybe_unused;
+ int skip_idx = -1;
+ int first_call = 0;
+
+ /*
+ * Based on DWARF debug information, some architectures skip
+ * a callchain entry saved by the kernel.
+ */
+ if (chain->nr < PERF_MAX_STACK_DEPTH)
+ skip_idx = arch_skip_callchain_idx(thread, chain);
callchain_cursor_reset(&callchain_cursor);
+ /*
+ * Add branches to call stack for easier browsing. This gives
+ * more context for a sample than just the callers.
+ *
+ * This uses individual histograms of paths compared to the
+ * aggregated histograms the normal LBR mode uses.
+ *
+ * Limitations for now:
+ * - No extra filters
+ * - No annotations (should annotate somehow)
+ */
+
+ if (branch && callchain_param.branch_callstack) {
+ int nr = min(max_stack, (int)branch->nr);
+ struct branch_entry be[nr];
+
+ if (branch->nr > PERF_MAX_BRANCH_DEPTH) {
+ pr_warning("corrupted branch chain. skipping...\n");
+ goto check_calls;
+ }
+
+ for (i = 0; i < nr; i++) {
+ if (callchain_param.order == ORDER_CALLEE) {
+ be[i] = branch->entries[i];
+ /*
+ * Check for overlap into the callchain.
+ * The return address is one off compared to
+ * the branch entry. To adjust for this
+ * assume the calling instruction is not longer
+ * than 8 bytes.
+ */
+ if (i == skip_idx ||
+ chain->ips[first_call] >= PERF_CONTEXT_MAX)
+ first_call++;
+ else if (be[i].from < chain->ips[first_call] &&
+ be[i].from >= chain->ips[first_call] - 8)
+ first_call++;
+ } else
+ be[i] = branch->entries[branch->nr - i - 1];
+ }
+
+ nr = remove_loops(be, nr);
+
+ for (i = 0; i < nr; i++) {
+ err = add_callchain_ip(thread, parent, root_al,
+ -1, be[i].to);
+ if (!err)
+ err = add_callchain_ip(thread, parent, root_al,
+ -1, be[i].from);
+ if (err == -EINVAL)
+ break;
+ if (err)
+ return err;
+ }
+ chain_nr -= nr;
+ }
+
+check_calls:
if (chain->nr > PERF_MAX_STACK_DEPTH) {
pr_warning("corrupted callchain. skipping...\n");
return 0;
}
- /*
- * Based on DWARF debug information, some architectures skip
- * a callchain entry saved by the kernel.
- */
- skip_idx = arch_skip_callchain_idx(machine, thread, chain);
-
- for (i = 0; i < chain_nr; i++) {
+ for (i = first_call; i < chain_nr; i++) {
u64 ip;
- struct addr_location al;
if (callchain_param.order == ORDER_CALLEE)
j = i;
continue;
}
- al.filtered = 0;
- thread__find_addr_location(thread, machine, cpumode,
- MAP__FUNCTION, ip, &al);
- if (al.sym != NULL) {
- if (sort__has_parent && !*parent &&
- symbol__match_regex(al.sym, &parent_regex))
- *parent = al.sym;
- else if (have_ignore_callees && root_al &&
- symbol__match_regex(al.sym, &ignore_callees_regex)) {
- /* Treat this symbol as the root,
- forgetting its callees. */
- *root_al = al;
- callchain_cursor_reset(&callchain_cursor);
- }
- }
-
- err = callchain_cursor_append(&callchain_cursor,
- ip, al.map, al.sym);
+ err = add_callchain_ip(thread, parent, root_al,
+ cpumode, ip);
+ if (err == -EINVAL)
+ break;
if (err)
return err;
}
entry->map, entry->sym);
}
-int machine__resolve_callchain(struct machine *machine,
- struct perf_evsel *evsel,
- struct thread *thread,
- struct perf_sample *sample,
- struct symbol **parent,
- struct addr_location *root_al,
- int max_stack)
+int thread__resolve_callchain(struct thread *thread,
+ struct perf_evsel *evsel,
+ struct perf_sample *sample,
+ struct symbol **parent,
+ struct addr_location *root_al,
+ int max_stack)
{
- int ret;
-
- ret = machine__resolve_callchain_sample(machine, thread,
- sample->callchain, parent,
- root_al, max_stack);
+ int ret = thread__resolve_callchain_sample(thread, sample->callchain,
+ sample->branch_stack,
+ parent, root_al, max_stack);
if (ret)
return ret;
(!sample->user_stack.size))
return 0;
- return unwind__get_entries(unwind_entry, &callchain_cursor, machine,
+ return unwind__get_entries(unwind_entry, &callchain_cursor,
thread, sample, max_stack);
}
u64 kernel_start;
symbol_filter_t symbol_filter;
pid_t *current_tid;
+ union { /* Tool specific area */
+ void *priv;
+ u64 db_id;
+ };
};
static inline
struct addr_location *al);
struct mem_info *sample__resolve_mem(struct perf_sample *sample,
struct addr_location *al);
-int machine__resolve_callchain(struct machine *machine,
- struct perf_evsel *evsel,
- struct thread *thread,
- struct perf_sample *sample,
- struct symbol **parent,
- struct addr_location *root_al,
- int max_stack);
+int thread__resolve_callchain(struct thread *thread,
+ struct perf_evsel *evsel,
+ struct perf_sample *sample,
+ struct symbol **parent,
+ struct addr_location *root_al,
+ int max_stack);
/*
* Default guest kernel is defined by parameter --guestkallsyms
if (map && map->dso) {
srcline = get_srcline(map->dso,
- map__rip_2objdump(map, addr));
+ map__rip_2objdump(map, addr), NULL, true);
if (srcline != SRCLINE_UNKNOWN)
ret = fprintf(fp, "%s%s", prefix, srcline);
free_srcline(srcline);
return ip + map->reloc;
}
-void map_groups__init(struct map_groups *mg)
+void map_groups__init(struct map_groups *mg, struct machine *machine)
{
int i;
for (i = 0; i < MAP__NR_TYPES; ++i) {
mg->maps[i] = RB_ROOT;
INIT_LIST_HEAD(&mg->removed_maps[i]);
}
- mg->machine = NULL;
+ mg->machine = machine;
mg->refcnt = 1;
}
return true;
}
-struct map_groups *map_groups__new(void)
+struct map_groups *map_groups__new(struct machine *machine)
{
struct map_groups *mg = malloc(sizeof(*mg));
if (mg != NULL)
- map_groups__init(mg);
+ map_groups__init(mg, machine);
return mg;
}
int refcnt;
};
-struct map_groups *map_groups__new(void);
+struct map_groups *map_groups__new(struct machine *machine);
void map_groups__delete(struct map_groups *mg);
bool map_groups__empty(struct map_groups *mg);
struct map *maps__find(struct rb_root *maps, u64 addr);
struct map *maps__first(struct rb_root *maps);
struct map *maps__next(struct map *map);
-void map_groups__init(struct map_groups *mg);
+void map_groups__init(struct map_groups *mg, struct machine *machine);
void map_groups__exit(struct map_groups *mg);
int map_groups__clone(struct map_groups *mg,
struct map_groups *parent, enum map_type type);
if (evsel) {
evsel->unit = info.unit;
evsel->scale = info.scale;
+ evsel->per_pkg = info.per_pkg;
+ evsel->snapshot = info.snapshot;
}
return evsel ? 0 : -ENOMEM;
return opterror(opt, "takes no value", flags);
if (unset && (opt->flags & PARSE_OPT_NONEG))
return opterror(opt, "isn't available", flags);
-
+ if (opt->flags & PARSE_OPT_DISABLED)
+ return opterror(opt, "is not usable", flags);
+
+ if (opt->flags & PARSE_OPT_EXCLUSIVE) {
+ if (p->excl_opt) {
+ char msg[128];
+
+ if (((flags & OPT_SHORT) && p->excl_opt->short_name) ||
+ p->excl_opt->long_name == NULL) {
+ scnprintf(msg, sizeof(msg), "cannot be used with switch `%c'",
+ p->excl_opt->short_name);
+ } else {
+ scnprintf(msg, sizeof(msg), "cannot be used with %s",
+ p->excl_opt->long_name);
+ }
+ opterror(opt, msg, flags);
+ return -3;
+ }
+ p->excl_opt = opt;
+ }
if (!(flags & OPT_SHORT) && p->opt) {
switch (opt->type) {
case OPTION_CALLBACK:
const char * const usagestr[])
{
int internal_help = !(ctx->flags & PARSE_OPT_NO_INTERNAL_HELP);
+ int excl_short_opt = 1;
+ const char *arg;
/* we must reset ->opt, unknown short option leave it dangling */
ctx->opt = NULL;
for (; ctx->argc; ctx->argc--, ctx->argv++) {
- const char *arg = ctx->argv[0];
-
+ arg = ctx->argv[0];
if (*arg != '-' || !arg[1]) {
if (ctx->flags & PARSE_OPT_STOP_AT_NON_OPTION)
break;
}
if (arg[1] != '-') {
- ctx->opt = arg + 1;
+ ctx->opt = ++arg;
if (internal_help && *ctx->opt == 'h')
return usage_with_options_internal(usagestr, options, 0);
switch (parse_short_opt(ctx, options)) {
case -1:
- return parse_options_usage(usagestr, options, arg + 1, 1);
+ return parse_options_usage(usagestr, options, arg, 1);
case -2:
goto unknown;
+ case -3:
+ goto exclusive;
default:
break;
}
if (ctx->opt)
- check_typos(arg + 1, options);
+ check_typos(arg, options);
while (ctx->opt) {
if (internal_help && *ctx->opt == 'h')
return usage_with_options_internal(usagestr, options, 0);
ctx->argv[0] = strdup(ctx->opt - 1);
*(char *)ctx->argv[0] = '-';
goto unknown;
+ case -3:
+ goto exclusive;
default:
break;
}
break;
}
- if (internal_help && !strcmp(arg + 2, "help-all"))
+ arg += 2;
+ if (internal_help && !strcmp(arg, "help-all"))
return usage_with_options_internal(usagestr, options, 1);
- if (internal_help && !strcmp(arg + 2, "help"))
+ if (internal_help && !strcmp(arg, "help"))
return usage_with_options_internal(usagestr, options, 0);
- if (!strcmp(arg + 2, "list-opts"))
+ if (!strcmp(arg, "list-opts"))
return PARSE_OPT_LIST_OPTS;
- if (!strcmp(arg + 2, "list-cmds"))
+ if (!strcmp(arg, "list-cmds"))
return PARSE_OPT_LIST_SUBCMDS;
- switch (parse_long_opt(ctx, arg + 2, options)) {
+ switch (parse_long_opt(ctx, arg, options)) {
case -1:
- return parse_options_usage(usagestr, options, arg + 2, 0);
+ return parse_options_usage(usagestr, options, arg, 0);
case -2:
goto unknown;
+ case -3:
+ excl_short_opt = 0;
+ goto exclusive;
default:
break;
}
ctx->opt = NULL;
}
return PARSE_OPT_DONE;
+
+exclusive:
+ parse_options_usage(usagestr, options, arg, excl_short_opt);
+ if ((excl_short_opt && ctx->excl_opt->short_name) ||
+ ctx->excl_opt->long_name == NULL) {
+ char opt = ctx->excl_opt->short_name;
+ parse_options_usage(NULL, options, &opt, 1);
+ } else {
+ parse_options_usage(NULL, options, ctx->excl_opt->long_name, 0);
+ }
+ return PARSE_OPT_HELP;
}
int parse_options_end(struct parse_opt_ctx_t *ctx)
}
if (!full && (opts->flags & PARSE_OPT_HIDDEN))
return;
+ if (opts->flags & PARSE_OPT_DISABLED)
+ return;
pos = fprintf(stderr, " ");
if (opts->short_name)
}
return 0;
}
+
+void set_option_flag(struct option *opts, int shortopt, const char *longopt,
+ int flag)
+{
+ for (; opts->type != OPTION_END; opts++) {
+ if ((shortopt && opts->short_name == shortopt) ||
+ (opts->long_name && longopt &&
+ !strcmp(opts->long_name, longopt))) {
+ opts->flags |= flag;
+ break;
+ }
+ }
+}
PARSE_OPT_NONEG = 4,
PARSE_OPT_HIDDEN = 8,
PARSE_OPT_LASTARG_DEFAULT = 16,
+ PARSE_OPT_DISABLED = 32,
+ PARSE_OPT_EXCLUSIVE = 64,
};
struct option;
const char **out;
int argc, cpidx;
const char *opt;
+ const struct option *excl_opt;
int flags;
};
extern const char *parse_options_fix_filename(const char *prefix, const char *file);
+void set_option_flag(struct option *opts, int sopt, const char *lopt, int flag);
#endif /* __PERF_PARSE_OPTIONS_H */
return -1;
}
+static int
+perf_pmu__parse_per_pkg(struct perf_pmu_alias *alias, char *dir, char *name)
+{
+ char path[PATH_MAX];
+ int fd;
+
+ snprintf(path, PATH_MAX, "%s/%s.per-pkg", dir, name);
+
+ fd = open(path, O_RDONLY);
+ if (fd == -1)
+ return -1;
+
+ close(fd);
+
+ alias->per_pkg = true;
+ return 0;
+}
+
+static int perf_pmu__parse_snapshot(struct perf_pmu_alias *alias,
+ char *dir, char *name)
+{
+ char path[PATH_MAX];
+ int fd;
+
+ snprintf(path, PATH_MAX, "%s/%s.snapshot", dir, name);
+
+ fd = open(path, O_RDONLY);
+ if (fd == -1)
+ return -1;
+
+ alias->snapshot = true;
+ close(fd);
+ return 0;
+}
+
static int perf_pmu__new_alias(struct list_head *list, char *dir, char *name, FILE *file)
{
struct perf_pmu_alias *alias;
INIT_LIST_HEAD(&alias->terms);
alias->scale = 1.0;
alias->unit[0] = '\0';
+ alias->per_pkg = false;
ret = parse_events_terms(&alias->terms, buf);
if (ret) {
*/
perf_pmu__parse_unit(alias, dir, name);
perf_pmu__parse_scale(alias, dir, name);
+ perf_pmu__parse_per_pkg(alias, dir, name);
+ perf_pmu__parse_snapshot(alias, dir, name);
list_add_tail(&alias->list, list);
return true;
if (len > 6 && !strcmp(name + len - 6, ".scale"))
return true;
+ if (len > 8 && !strcmp(name + len - 8, ".per-pkg"))
+ return true;
+ if (len > 9 && !strcmp(name + len - 9, ".snapshot"))
+ return true;
return false;
}
}
-static int check_unit_scale(struct perf_pmu_alias *alias,
- const char **unit, double *scale)
+static int check_info_data(struct perf_pmu_alias *alias,
+ struct perf_pmu_info *info)
{
/*
* Only one term in event definition can
- * define unit and scale, fail if there's
- * more than one.
+ * define unit, scale and snapshot, fail
+ * if there's more than one.
*/
- if ((*unit && alias->unit) ||
- (*scale && alias->scale))
+ if ((info->unit && alias->unit) ||
+ (info->scale && alias->scale) ||
+ (info->snapshot && alias->snapshot))
return -EINVAL;
if (alias->unit)
- *unit = alias->unit;
+ info->unit = alias->unit;
if (alias->scale)
- *scale = alias->scale;
+ info->scale = alias->scale;
+
+ if (alias->snapshot)
+ info->snapshot = alias->snapshot;
return 0;
}
struct perf_pmu_alias *alias;
int ret;
+ info->per_pkg = false;
+
/*
* Mark unit and scale as not set
* (different from default values, see below)
*/
- info->unit = NULL;
- info->scale = 0.0;
+ info->unit = NULL;
+ info->scale = 0.0;
+ info->snapshot = false;
list_for_each_entry_safe(term, h, head_terms, list) {
alias = pmu_find_alias(pmu, term);
if (ret)
return ret;
- ret = check_unit_scale(alias, &info->unit, &info->scale);
+ ret = check_info_data(alias, info);
if (ret)
return ret;
+ if (alias->per_pkg)
+ info->per_pkg = true;
+
list_del(&term->list);
free(term);
}
pmu = NULL;
len = 0;
- while ((pmu = perf_pmu__scan(pmu)) != NULL)
+ while ((pmu = perf_pmu__scan(pmu)) != NULL) {
list_for_each_entry(alias, &pmu->aliases, list)
len++;
- aliases = malloc(sizeof(char *) * len);
+ if (pmu->selectable)
+ len++;
+ }
+ aliases = zalloc(sizeof(char *) * len);
if (!aliases)
- return;
+ goto out_enomem;
pmu = NULL;
j = 0;
- while ((pmu = perf_pmu__scan(pmu)) != NULL)
+ while ((pmu = perf_pmu__scan(pmu)) != NULL) {
list_for_each_entry(alias, &pmu->aliases, list) {
char *name = format_alias(buf, sizeof(buf), pmu, alias);
bool is_cpu = !strcmp(pmu->name, "cpu");
(!is_cpu && strglobmatch(alias->name,
event_glob))))
continue;
- aliases[j] = name;
+
if (is_cpu && !name_only)
- aliases[j] = format_alias_or(buf, sizeof(buf),
- pmu, alias);
- aliases[j] = strdup(aliases[j]);
+ name = format_alias_or(buf, sizeof(buf), pmu, alias);
+
+ aliases[j] = strdup(name);
+ if (aliases[j] == NULL)
+ goto out_enomem;
j++;
}
+ if (pmu->selectable) {
+ char *s;
+ if (asprintf(&s, "%s//", pmu->name) < 0)
+ goto out_enomem;
+ aliases[j] = s;
+ j++;
+ }
+ }
len = j;
qsort(aliases, len, sizeof(char *), cmp_string);
for (j = 0; j < len; j++) {
continue;
}
printf(" %-50s [Kernel PMU event]\n", aliases[j]);
- zfree(&aliases[j]);
printed++;
}
if (printed)
printf("\n");
- free(aliases);
+out_free:
+ for (j = 0; j < len; j++)
+ zfree(&aliases[j]);
+ zfree(&aliases);
+ return;
+
+out_enomem:
+ printf("FATAL: not enough memory to print PMU events\n");
+ if (aliases)
+ goto out_free;
}
bool pmu_have_event(const char *pname, const char *name)
struct perf_pmu {
char *name;
__u32 type;
+ bool selectable;
struct perf_event_attr *default_config;
struct cpu_map *cpus;
struct list_head format; /* HEAD struct perf_pmu_format -> list */
struct perf_pmu_info {
const char *unit;
double scale;
+ bool per_pkg;
+ bool snapshot;
};
#define UNIT_MAX_LEN 31 /* max length for event unit name */
struct list_head list; /* ELEM */
char unit[UNIT_MAX_LEN+1];
double scale;
+ bool per_pkg;
+ bool snapshot;
};
struct perf_pmu *perf_pmu__find(const char *name);
if (ret < 0)
return ret;
- printf(" %-20s (on %s", buf, place);
+ pr_info(" %-20s (on %s", buf, place);
if (module)
- printf(" in %s", module);
+ pr_info(" in %s", module);
if (pev->nargs > 0) {
- printf(" with");
+ pr_info(" with");
for (i = 0; i < pev->nargs; i++) {
ret = synthesize_perf_probe_arg(&pev->args[i],
buf, 128);
if (ret < 0)
break;
- printf(" %s", buf);
+ pr_info(" %s", buf);
}
}
- printf(")\n");
+ pr_info(")\n");
free(place);
return ret;
}
}
ret = 0;
- printf("Added new event%s\n", (ntevs > 1) ? "s:" : ":");
+ pr_info("Added new event%s\n", (ntevs > 1) ? "s:" : ":");
for (i = 0; i < ntevs; i++) {
tev = &tevs[i];
if (pev->event)
if (ret >= 0) {
/* Show how to use the event. */
- printf("\nYou can now use it in all perf tools, such as:\n\n");
- printf("\tperf record -e %s:%s -aR sleep 1\n\n", tev->group,
+ pr_info("\nYou can now use it in all perf tools, such as:\n\n");
+ pr_info("\tperf record -e %s:%s -aR sleep 1\n\n", tev->group,
tev->event);
}
goto error;
}
- printf("Removed event: %s\n", ent->s);
+ pr_info("Removed event: %s\n", ent->s);
return 0;
error:
pr_warning("Failed to delete event: %s\n",
#include <string.h>
#include <ctype.h>
#include <errno.h>
+#include <linux/bitmap.h>
#include "../util.h"
#include <EXTERN.h>
#define FTRACE_MAX_EVENT \
((1 << (sizeof(unsigned short) * 8)) - 1)
-struct event_format *events[FTRACE_MAX_EVENT];
+static DECLARE_BITMAP(events_defined, FTRACE_MAX_EVENT);
extern struct scripting_context *scripting_context;
define_event_symbols(event, ev_name, args->next);
}
-static inline struct event_format *find_cache_event(struct perf_evsel *evsel)
-{
- static char ev_name[256];
- struct event_format *event;
- int type = evsel->attr.config;
-
- if (events[type])
- return events[type];
-
- events[type] = event = evsel->tp_format;
- if (!event)
- return NULL;
-
- sprintf(ev_name, "%s::%s", event->system, event->name);
-
- define_event_symbols(event, ev_name, event->print_fmt.args);
-
- return event;
-}
-
static void perl_process_tracepoint(struct perf_sample *sample,
struct perf_evsel *evsel,
struct thread *thread)
{
+ struct event_format *event = evsel->tp_format;
struct format_field *field;
static char handler[256];
unsigned long long val;
unsigned long s, ns;
- struct event_format *event;
int pid;
int cpu = sample->cpu;
void *data = sample->raw_data;
if (evsel->attr.type != PERF_TYPE_TRACEPOINT)
return;
- event = find_cache_event(evsel);
if (!event)
die("ug! no event found for type %" PRIu64, (u64)evsel->attr.config);
sprintf(handler, "%s::%s", event->system, event->name);
+ if (!test_and_set_bit(event->id, events_defined))
+ define_event_symbols(event, handler, event->print_fmt.args);
+
s = nsecs / NSECS_PER_SEC;
ns = nsecs - s * NSECS_PER_SEC;
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
+#include <stdbool.h>
#include <errno.h>
+#include <linux/bitmap.h>
#include "../../perf.h"
#include "../debug.h"
#include "../util.h"
#include "../event.h"
#include "../thread.h"
+#include "../comm.h"
+#include "../machine.h"
+#include "../db-export.h"
+#include "../thread-stack.h"
#include "../trace-event.h"
#include "../machine.h"
#define FTRACE_MAX_EVENT \
((1 << (sizeof(unsigned short) * 8)) - 1)
-struct event_format *events[FTRACE_MAX_EVENT];
+static DECLARE_BITMAP(events_defined, FTRACE_MAX_EVENT);
#define MAX_FIELDS 64
#define N_COMMON_FIELDS 7
static PyObject *main_module, *main_dict;
+struct tables {
+ struct db_export dbe;
+ PyObject *evsel_handler;
+ PyObject *machine_handler;
+ PyObject *thread_handler;
+ PyObject *comm_handler;
+ PyObject *comm_thread_handler;
+ PyObject *dso_handler;
+ PyObject *symbol_handler;
+ PyObject *branch_type_handler;
+ PyObject *sample_handler;
+ PyObject *call_path_handler;
+ PyObject *call_return_handler;
+ bool db_export_mode;
+};
+
+static struct tables tables_global;
+
static void handler_call_die(const char *handler_name) NORETURN;
static void handler_call_die(const char *handler_name)
{
define_event_symbols(event, ev_name, args->next);
}
-static inline struct event_format *find_cache_event(struct perf_evsel *evsel)
-{
- static char ev_name[256];
- struct event_format *event;
- int type = evsel->attr.config;
-
- /*
- * XXX: Do we really need to cache this since now we have evsel->tp_format
- * cached already? Need to re-read this "cache" routine that as well calls
- * define_event_symbols() :-\
- */
- if (events[type])
- return events[type];
-
- events[type] = event = evsel->tp_format;
- if (!event)
- return NULL;
-
- sprintf(ev_name, "%s__%s", event->system, event->name);
-
- define_event_symbols(event, ev_name, event->print_fmt.args);
-
- return event;
-}
-
static PyObject *get_field_numeric_entry(struct event_format *event,
struct format_field *field, void *data)
{
if (!symbol_conf.use_callchain || !sample->callchain)
goto exit;
- if (machine__resolve_callchain(al->machine, evsel, al->thread,
- sample, NULL, NULL,
- PERF_MAX_STACK_DEPTH) != 0) {
+ if (thread__resolve_callchain(al->thread, evsel,
+ sample, NULL, NULL,
+ PERF_MAX_STACK_DEPTH) != 0) {
pr_err("Failed to resolve callchain. Skipping\n");
goto exit;
}
struct thread *thread,
struct addr_location *al)
{
+ struct event_format *event = evsel->tp_format;
PyObject *handler, *context, *t, *obj, *callchain;
PyObject *dict = NULL;
static char handler_name[256];
struct format_field *field;
unsigned long s, ns;
- struct event_format *event;
unsigned n = 0;
int pid;
int cpu = sample->cpu;
if (!t)
Py_FatalError("couldn't create Python tuple");
- event = find_cache_event(evsel);
if (!event)
die("ug! no event found for type %d", (int)evsel->attr.config);
sprintf(handler_name, "%s__%s", event->system, event->name);
+ if (!test_and_set_bit(event->id, events_defined))
+ define_event_symbols(event, handler_name, event->print_fmt.args);
+
handler = get_handler(handler_name);
if (!handler) {
dict = PyDict_New();
Py_DECREF(t);
}
+static PyObject *tuple_new(unsigned int sz)
+{
+ PyObject *t;
+
+ t = PyTuple_New(sz);
+ if (!t)
+ Py_FatalError("couldn't create Python tuple");
+ return t;
+}
+
+static int tuple_set_u64(PyObject *t, unsigned int pos, u64 val)
+{
+#if BITS_PER_LONG == 64
+ return PyTuple_SetItem(t, pos, PyInt_FromLong(val));
+#endif
+#if BITS_PER_LONG == 32
+ return PyTuple_SetItem(t, pos, PyLong_FromLongLong(val));
+#endif
+}
+
+static int tuple_set_s32(PyObject *t, unsigned int pos, s32 val)
+{
+ return PyTuple_SetItem(t, pos, PyInt_FromLong(val));
+}
+
+static int tuple_set_string(PyObject *t, unsigned int pos, const char *s)
+{
+ return PyTuple_SetItem(t, pos, PyString_FromString(s));
+}
+
+static int python_export_evsel(struct db_export *dbe, struct perf_evsel *evsel)
+{
+ struct tables *tables = container_of(dbe, struct tables, dbe);
+ PyObject *t;
+
+ t = tuple_new(2);
+
+ tuple_set_u64(t, 0, evsel->db_id);
+ tuple_set_string(t, 1, perf_evsel__name(evsel));
+
+ call_object(tables->evsel_handler, t, "evsel_table");
+
+ Py_DECREF(t);
+
+ return 0;
+}
+
+static int python_export_machine(struct db_export *dbe,
+ struct machine *machine)
+{
+ struct tables *tables = container_of(dbe, struct tables, dbe);
+ PyObject *t;
+
+ t = tuple_new(3);
+
+ tuple_set_u64(t, 0, machine->db_id);
+ tuple_set_s32(t, 1, machine->pid);
+ tuple_set_string(t, 2, machine->root_dir ? machine->root_dir : "");
+
+ call_object(tables->machine_handler, t, "machine_table");
+
+ Py_DECREF(t);
+
+ return 0;
+}
+
+static int python_export_thread(struct db_export *dbe, struct thread *thread,
+ u64 main_thread_db_id, struct machine *machine)
+{
+ struct tables *tables = container_of(dbe, struct tables, dbe);
+ PyObject *t;
+
+ t = tuple_new(5);
+
+ tuple_set_u64(t, 0, thread->db_id);
+ tuple_set_u64(t, 1, machine->db_id);
+ tuple_set_u64(t, 2, main_thread_db_id);
+ tuple_set_s32(t, 3, thread->pid_);
+ tuple_set_s32(t, 4, thread->tid);
+
+ call_object(tables->thread_handler, t, "thread_table");
+
+ Py_DECREF(t);
+
+ return 0;
+}
+
+static int python_export_comm(struct db_export *dbe, struct comm *comm)
+{
+ struct tables *tables = container_of(dbe, struct tables, dbe);
+ PyObject *t;
+
+ t = tuple_new(2);
+
+ tuple_set_u64(t, 0, comm->db_id);
+ tuple_set_string(t, 1, comm__str(comm));
+
+ call_object(tables->comm_handler, t, "comm_table");
+
+ Py_DECREF(t);
+
+ return 0;
+}
+
+static int python_export_comm_thread(struct db_export *dbe, u64 db_id,
+ struct comm *comm, struct thread *thread)
+{
+ struct tables *tables = container_of(dbe, struct tables, dbe);
+ PyObject *t;
+
+ t = tuple_new(3);
+
+ tuple_set_u64(t, 0, db_id);
+ tuple_set_u64(t, 1, comm->db_id);
+ tuple_set_u64(t, 2, thread->db_id);
+
+ call_object(tables->comm_thread_handler, t, "comm_thread_table");
+
+ Py_DECREF(t);
+
+ return 0;
+}
+
+static int python_export_dso(struct db_export *dbe, struct dso *dso,
+ struct machine *machine)
+{
+ struct tables *tables = container_of(dbe, struct tables, dbe);
+ char sbuild_id[BUILD_ID_SIZE * 2 + 1];
+ PyObject *t;
+
+ build_id__sprintf(dso->build_id, sizeof(dso->build_id), sbuild_id);
+
+ t = tuple_new(5);
+
+ tuple_set_u64(t, 0, dso->db_id);
+ tuple_set_u64(t, 1, machine->db_id);
+ tuple_set_string(t, 2, dso->short_name);
+ tuple_set_string(t, 3, dso->long_name);
+ tuple_set_string(t, 4, sbuild_id);
+
+ call_object(tables->dso_handler, t, "dso_table");
+
+ Py_DECREF(t);
+
+ return 0;
+}
+
+static int python_export_symbol(struct db_export *dbe, struct symbol *sym,
+ struct dso *dso)
+{
+ struct tables *tables = container_of(dbe, struct tables, dbe);
+ u64 *sym_db_id = symbol__priv(sym);
+ PyObject *t;
+
+ t = tuple_new(6);
+
+ tuple_set_u64(t, 0, *sym_db_id);
+ tuple_set_u64(t, 1, dso->db_id);
+ tuple_set_u64(t, 2, sym->start);
+ tuple_set_u64(t, 3, sym->end);
+ tuple_set_s32(t, 4, sym->binding);
+ tuple_set_string(t, 5, sym->name);
+
+ call_object(tables->symbol_handler, t, "symbol_table");
+
+ Py_DECREF(t);
+
+ return 0;
+}
+
+static int python_export_branch_type(struct db_export *dbe, u32 branch_type,
+ const char *name)
+{
+ struct tables *tables = container_of(dbe, struct tables, dbe);
+ PyObject *t;
+
+ t = tuple_new(2);
+
+ tuple_set_s32(t, 0, branch_type);
+ tuple_set_string(t, 1, name);
+
+ call_object(tables->branch_type_handler, t, "branch_type_table");
+
+ Py_DECREF(t);
+
+ return 0;
+}
+
+static int python_export_sample(struct db_export *dbe,
+ struct export_sample *es)
+{
+ struct tables *tables = container_of(dbe, struct tables, dbe);
+ PyObject *t;
+
+ t = tuple_new(21);
+
+ tuple_set_u64(t, 0, es->db_id);
+ tuple_set_u64(t, 1, es->evsel->db_id);
+ tuple_set_u64(t, 2, es->al->machine->db_id);
+ tuple_set_u64(t, 3, es->thread->db_id);
+ tuple_set_u64(t, 4, es->comm_db_id);
+ tuple_set_u64(t, 5, es->dso_db_id);
+ tuple_set_u64(t, 6, es->sym_db_id);
+ tuple_set_u64(t, 7, es->offset);
+ tuple_set_u64(t, 8, es->sample->ip);
+ tuple_set_u64(t, 9, es->sample->time);
+ tuple_set_s32(t, 10, es->sample->cpu);
+ tuple_set_u64(t, 11, es->addr_dso_db_id);
+ tuple_set_u64(t, 12, es->addr_sym_db_id);
+ tuple_set_u64(t, 13, es->addr_offset);
+ tuple_set_u64(t, 14, es->sample->addr);
+ tuple_set_u64(t, 15, es->sample->period);
+ tuple_set_u64(t, 16, es->sample->weight);
+ tuple_set_u64(t, 17, es->sample->transaction);
+ tuple_set_u64(t, 18, es->sample->data_src);
+ tuple_set_s32(t, 19, es->sample->flags & PERF_BRANCH_MASK);
+ tuple_set_s32(t, 20, !!(es->sample->flags & PERF_IP_FLAG_IN_TX));
+
+ call_object(tables->sample_handler, t, "sample_table");
+
+ Py_DECREF(t);
+
+ return 0;
+}
+
+static int python_export_call_path(struct db_export *dbe, struct call_path *cp)
+{
+ struct tables *tables = container_of(dbe, struct tables, dbe);
+ PyObject *t;
+ u64 parent_db_id, sym_db_id;
+
+ parent_db_id = cp->parent ? cp->parent->db_id : 0;
+ sym_db_id = cp->sym ? *(u64 *)symbol__priv(cp->sym) : 0;
+
+ t = tuple_new(4);
+
+ tuple_set_u64(t, 0, cp->db_id);
+ tuple_set_u64(t, 1, parent_db_id);
+ tuple_set_u64(t, 2, sym_db_id);
+ tuple_set_u64(t, 3, cp->ip);
+
+ call_object(tables->call_path_handler, t, "call_path_table");
+
+ Py_DECREF(t);
+
+ return 0;
+}
+
+static int python_export_call_return(struct db_export *dbe,
+ struct call_return *cr)
+{
+ struct tables *tables = container_of(dbe, struct tables, dbe);
+ u64 comm_db_id = cr->comm ? cr->comm->db_id : 0;
+ PyObject *t;
+
+ t = tuple_new(11);
+
+ tuple_set_u64(t, 0, cr->db_id);
+ tuple_set_u64(t, 1, cr->thread->db_id);
+ tuple_set_u64(t, 2, comm_db_id);
+ tuple_set_u64(t, 3, cr->cp->db_id);
+ tuple_set_u64(t, 4, cr->call_time);
+ tuple_set_u64(t, 5, cr->return_time);
+ tuple_set_u64(t, 6, cr->branch_count);
+ tuple_set_u64(t, 7, cr->call_ref);
+ tuple_set_u64(t, 8, cr->return_ref);
+ tuple_set_u64(t, 9, cr->cp->parent->db_id);
+ tuple_set_s32(t, 10, cr->flags);
+
+ call_object(tables->call_return_handler, t, "call_return_table");
+
+ Py_DECREF(t);
+
+ return 0;
+}
+
+static int python_process_call_return(struct call_return *cr, void *data)
+{
+ struct db_export *dbe = data;
+
+ return db_export__call_return(dbe, cr);
+}
+
static void python_process_general_event(struct perf_sample *sample,
struct perf_evsel *evsel,
struct thread *thread,
Py_DECREF(t);
}
-static void python_process_event(union perf_event *event __maybe_unused,
+static void python_process_event(union perf_event *event,
struct perf_sample *sample,
struct perf_evsel *evsel,
struct thread *thread,
struct addr_location *al)
{
+ struct tables *tables = &tables_global;
+
switch (evsel->attr.type) {
case PERF_TYPE_TRACEPOINT:
python_process_tracepoint(sample, evsel, thread, al);
break;
/* Reserve for future process_hw/sw/raw APIs */
default:
- python_process_general_event(sample, evsel, thread, al);
+ if (tables->db_export_mode)
+ db_export__sample(&tables->dbe, event, sample, evsel,
+ thread, al);
+ else
+ python_process_general_event(sample, evsel, thread, al);
}
}
return -1;
}
+#define SET_TABLE_HANDLER_(name, handler_name, table_name) do { \
+ tables->handler_name = get_handler(#table_name); \
+ if (tables->handler_name) \
+ tables->dbe.export_ ## name = python_export_ ## name; \
+} while (0)
+
+#define SET_TABLE_HANDLER(name) \
+ SET_TABLE_HANDLER_(name, name ## _handler, name ## _table)
+
+static void set_table_handlers(struct tables *tables)
+{
+ const char *perf_db_export_mode = "perf_db_export_mode";
+ const char *perf_db_export_calls = "perf_db_export_calls";
+ PyObject *db_export_mode, *db_export_calls;
+ bool export_calls = false;
+ int ret;
+
+ memset(tables, 0, sizeof(struct tables));
+ if (db_export__init(&tables->dbe))
+ Py_FatalError("failed to initialize export");
+
+ db_export_mode = PyDict_GetItemString(main_dict, perf_db_export_mode);
+ if (!db_export_mode)
+ return;
+
+ ret = PyObject_IsTrue(db_export_mode);
+ if (ret == -1)
+ handler_call_die(perf_db_export_mode);
+ if (!ret)
+ return;
+
+ tables->dbe.crp = NULL;
+ db_export_calls = PyDict_GetItemString(main_dict, perf_db_export_calls);
+ if (db_export_calls) {
+ ret = PyObject_IsTrue(db_export_calls);
+ if (ret == -1)
+ handler_call_die(perf_db_export_calls);
+ export_calls = !!ret;
+ }
+
+ if (export_calls) {
+ tables->dbe.crp =
+ call_return_processor__new(python_process_call_return,
+ &tables->dbe);
+ if (!tables->dbe.crp)
+ Py_FatalError("failed to create calls processor");
+ }
+
+ tables->db_export_mode = true;
+ /*
+ * Reserve per symbol space for symbol->db_id via symbol__priv()
+ */
+ symbol_conf.priv_size = sizeof(u64);
+
+ SET_TABLE_HANDLER(evsel);
+ SET_TABLE_HANDLER(machine);
+ SET_TABLE_HANDLER(thread);
+ SET_TABLE_HANDLER(comm);
+ SET_TABLE_HANDLER(comm_thread);
+ SET_TABLE_HANDLER(dso);
+ SET_TABLE_HANDLER(symbol);
+ SET_TABLE_HANDLER(branch_type);
+ SET_TABLE_HANDLER(sample);
+ SET_TABLE_HANDLER(call_path);
+ SET_TABLE_HANDLER(call_return);
+}
+
/*
* Start trace script
*/
static int python_start_script(const char *script, int argc, const char **argv)
{
+ struct tables *tables = &tables_global;
const char **command_line;
char buf[PATH_MAX];
int i, err = 0;
free(command_line);
+ set_table_handlers(tables);
+
+ if (tables->db_export_mode) {
+ err = db_export__branch_types(&tables->dbe);
+ if (err)
+ goto error;
+ }
+
return err;
error:
Py_Finalize();
static int python_flush_script(void)
{
- return 0;
+ struct tables *tables = &tables_global;
+
+ return db_export__flush(&tables->dbe);
}
/*
*/
static int python_stop_script(void)
{
+ struct tables *tables = &tables_global;
+
try_call_object("trace_end", NULL);
+ db_export__exit(&tables->dbe);
+
Py_XDECREF(main_dict);
Py_XDECREF(main_module);
Py_Finalize();
union perf_event *event,
struct perf_session *session);
+static int process_id_index_stub(struct perf_tool *tool __maybe_unused,
+ union perf_event *event __maybe_unused,
+ struct perf_session *perf_session
+ __maybe_unused)
+{
+ dump_printf(": unhandled!\n");
+ return 0;
+}
+
void perf_tool__fill_defaults(struct perf_tool *tool)
{
if (tool->sample == NULL)
else
tool->finished_round = process_finished_round_stub;
}
+ if (tool->id_index == NULL)
+ tool->id_index = process_id_index_stub;
}
static void swap_sample_id_all(union perf_event *event, void *data)
[PERF_RECORD_HEADER_EVENT_TYPE] = perf_event__event_type_swap,
[PERF_RECORD_HEADER_TRACING_DATA] = perf_event__tracing_data_swap,
[PERF_RECORD_HEADER_BUILD_ID] = NULL,
+ [PERF_RECORD_ID_INDEX] = perf_event__all64_swap,
[PERF_RECORD_HEADER_MAX] = NULL,
};
return -ETIME;
if (timestamp < oe->last_flush) {
- WARN_ONCE(1, "Timestamp below last timeslice flush\n");
-
- pr_oe_time(timestamp, "out of order event");
+ pr_oe_time(timestamp, "out of order event\n");
pr_oe_time(oe->last_flush, "last flush, last_flush_type %d\n",
oe->last_flush_type);
- /* We could get out of order messages after forced flush. */
- if (oe->last_flush_type != OE_FLUSH__HALF)
- return -EINVAL;
+ s->stats.nr_unordered_events++;
}
new = ordered_events__new(oe, timestamp, event);
}
}
+static const char *regs_abi[] = {
+ [PERF_SAMPLE_REGS_ABI_NONE] = "none",
+ [PERF_SAMPLE_REGS_ABI_32] = "32-bit",
+ [PERF_SAMPLE_REGS_ABI_64] = "64-bit",
+};
+
+static inline const char *regs_dump_abi(struct regs_dump *d)
+{
+ if (d->abi > PERF_SAMPLE_REGS_ABI_64)
+ return "unknown";
+
+ return regs_abi[d->abi];
+}
+
+static void regs__printf(const char *type, struct regs_dump *regs)
+{
+ u64 mask = regs->mask;
+
+ printf("... %s regs: mask 0x%" PRIx64 " ABI %s\n",
+ type,
+ mask,
+ regs_dump_abi(regs));
+
+ regs_dump__printf(mask, regs->regs);
+}
+
static void regs_user__printf(struct perf_sample *sample)
{
struct regs_dump *user_regs = &sample->user_regs;
- if (user_regs->regs) {
- u64 mask = user_regs->mask;
- printf("... user regs: mask 0x%" PRIx64 "\n", mask);
- regs_dump__printf(mask, user_regs->regs);
- }
+ if (user_regs->regs)
+ regs__printf("user", user_regs);
+}
+
+static void regs_intr__printf(struct perf_sample *sample)
+{
+ struct regs_dump *intr_regs = &sample->intr_regs;
+
+ if (intr_regs->regs)
+ regs__printf("intr", intr_regs);
}
static void stack_user__printf(struct stack_dump *dump)
if (sample_type & PERF_SAMPLE_REGS_USER)
regs_user__printf(sample);
+ if (sample_type & PERF_SAMPLE_REGS_INTR)
+ regs_intr__printf(sample);
+
if (sample_type & PERF_SAMPLE_STACK_USER)
stack_user__printf(&sample->user_stack);
return tool->build_id(tool, event, session);
case PERF_RECORD_FINISHED_ROUND:
return tool->finished_round(tool, event, session);
+ case PERF_RECORD_ID_INDEX:
+ return tool->id_index(tool, event, session);
default:
return -EINVAL;
}
}
+int perf_session__deliver_synth_event(struct perf_session *session,
+ union perf_event *event,
+ struct perf_sample *sample,
+ struct perf_tool *tool)
+{
+ events_stats__inc(&session->stats, event->header.type);
+
+ if (event->header.type >= PERF_RECORD_USER_TYPE_START)
+ return perf_session__process_user_event(session, event, tool, 0);
+
+ return perf_session__deliver_event(session, event, sample, tool, 0);
+}
+
static void event_swap(union perf_event *event, bool sample_id_all)
{
perf_event__swap_op swap;
"Do you have a KVM guest running and not using 'perf kvm'?\n",
session->stats.nr_unprocessable_samples);
}
+
+ if (session->stats.nr_unordered_events != 0)
+ ui__warning("%u out of order events recorded.\n", session->stats.nr_unordered_events);
}
volatile int session_done;
if (symbol_conf.use_callchain && sample->callchain) {
struct addr_location node_al;
- if (machine__resolve_callchain(al->machine, evsel, al->thread,
- sample, NULL, NULL,
- PERF_MAX_STACK_DEPTH) != 0) {
+ if (thread__resolve_callchain(al->thread, evsel,
+ sample, NULL, NULL,
+ PERF_MAX_STACK_DEPTH) != 0) {
if (verbose)
error("Failed to resolve callchain. Skipping\n");
return;
out:
return err;
}
+
+int perf_event__process_id_index(struct perf_tool *tool __maybe_unused,
+ union perf_event *event,
+ struct perf_session *session)
+{
+ struct perf_evlist *evlist = session->evlist;
+ struct id_index_event *ie = &event->id_index;
+ size_t i, nr, max_nr;
+
+ max_nr = (ie->header.size - sizeof(struct id_index_event)) /
+ sizeof(struct id_index_entry);
+ nr = ie->nr;
+ if (nr > max_nr)
+ return -EINVAL;
+
+ if (dump_trace)
+ fprintf(stdout, " nr: %zu\n", nr);
+
+ for (i = 0; i < nr; i++) {
+ struct id_index_entry *e = &ie->entries[i];
+ struct perf_sample_id *sid;
+
+ if (dump_trace) {
+ fprintf(stdout, " ... id: %"PRIu64, e->id);
+ fprintf(stdout, " idx: %"PRIu64, e->idx);
+ fprintf(stdout, " cpu: %"PRId64, e->cpu);
+ fprintf(stdout, " tid: %"PRId64"\n", e->tid);
+ }
+
+ sid = perf_evlist__id2sid(evlist, e->id);
+ if (!sid)
+ return -ENOENT;
+ sid->idx = e->idx;
+ sid->cpu = e->cpu;
+ sid->tid = e->tid;
+ }
+ return 0;
+}
+
+int perf_event__synthesize_id_index(struct perf_tool *tool,
+ perf_event__handler_t process,
+ struct perf_evlist *evlist,
+ struct machine *machine)
+{
+ union perf_event *ev;
+ struct perf_evsel *evsel;
+ size_t nr = 0, i = 0, sz, max_nr, n;
+ int err;
+
+ pr_debug2("Synthesizing id index\n");
+
+ max_nr = (UINT16_MAX - sizeof(struct id_index_event)) /
+ sizeof(struct id_index_entry);
+
+ evlist__for_each(evlist, evsel)
+ nr += evsel->ids;
+
+ n = nr > max_nr ? max_nr : nr;
+ sz = sizeof(struct id_index_event) + n * sizeof(struct id_index_entry);
+ ev = zalloc(sz);
+ if (!ev)
+ return -ENOMEM;
+
+ ev->id_index.header.type = PERF_RECORD_ID_INDEX;
+ ev->id_index.header.size = sz;
+ ev->id_index.nr = n;
+
+ evlist__for_each(evlist, evsel) {
+ u32 j;
+
+ for (j = 0; j < evsel->ids; j++) {
+ struct id_index_entry *e;
+ struct perf_sample_id *sid;
+
+ if (i >= n) {
+ err = process(tool, ev, NULL, machine);
+ if (err)
+ goto out_err;
+ nr -= n;
+ i = 0;
+ }
+
+ e = &ev->id_index.entries[i++];
+
+ e->id = evsel->id[j];
+
+ sid = perf_evlist__id2sid(evlist, e->id);
+ if (!sid) {
+ free(ev);
+ return -ENOENT;
+ }
+
+ e->idx = sid->idx;
+ e->cpu = sid->cpu;
+ e->tid = sid->tid;
+ }
+ }
+
+ sz = sizeof(struct id_index_event) + nr * sizeof(struct id_index_entry);
+ ev->id_index.header.size = sz;
+ ev->id_index.nr = nr;
+
+ err = process(tool, ev, NULL, machine);
+out_err:
+ free(ev);
+
+ return err;
+}
extern volatile int session_done;
#define session_done() ACCESS_ONCE(session_done)
+
+int perf_session__deliver_synth_event(struct perf_session *session,
+ union perf_event *event,
+ struct perf_sample *sample,
+ struct perf_tool *tool);
+
+int perf_event__process_id_index(struct perf_tool *tool,
+ union perf_event *event,
+ struct perf_session *session);
+
+int perf_event__synthesize_id_index(struct perf_tool *tool,
+ perf_event__handler_t process,
+ struct perf_evlist *evlist,
+ struct machine *machine);
+
#endif /* __PERF_SESSION_H */
else {
struct map *map = left->ms.map;
left->srcline = get_srcline(map->dso,
- map__rip_2objdump(map, left->ip));
+ map__rip_2objdump(map, left->ip),
+ left->ms.sym, true);
}
}
if (!right->srcline) {
else {
struct map *map = right->ms.map;
right->srcline = get_srcline(map->dso,
- map__rip_2objdump(map, right->ip));
+ map__rip_2objdump(map, right->ip),
+ right->ms.sym, true);
}
}
return strcmp(right->srcline, left->srcline);
static int hist_entry__srcline_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
- return repsep_snprintf(bf, size, "%*.*-s", width, width, he->srcline);
+ return repsep_snprintf(bf, size, "%-*.*s", width, width, he->srcline);
}
struct sort_entry sort_srcline = {
static int64_t
sort__dso_from_cmp(struct hist_entry *left, struct hist_entry *right)
{
+ if (!left->branch_info || !right->branch_info)
+ return cmp_null(left->branch_info, right->branch_info);
+
return _sort__dso_cmp(left->branch_info->from.map,
right->branch_info->from.map);
}
static int hist_entry__dso_from_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
- return _hist_entry__dso_snprintf(he->branch_info->from.map,
- bf, size, width);
+ if (he->branch_info)
+ return _hist_entry__dso_snprintf(he->branch_info->from.map,
+ bf, size, width);
+ else
+ return repsep_snprintf(bf, size, "%-*.*s", width, width, "N/A");
}
static int64_t
sort__dso_to_cmp(struct hist_entry *left, struct hist_entry *right)
{
+ if (!left->branch_info || !right->branch_info)
+ return cmp_null(left->branch_info, right->branch_info);
+
return _sort__dso_cmp(left->branch_info->to.map,
right->branch_info->to.map);
}
static int hist_entry__dso_to_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
- return _hist_entry__dso_snprintf(he->branch_info->to.map,
- bf, size, width);
+ if (he->branch_info)
+ return _hist_entry__dso_snprintf(he->branch_info->to.map,
+ bf, size, width);
+ else
+ return repsep_snprintf(bf, size, "%-*.*s", width, width, "N/A");
}
static int64_t
struct addr_map_symbol *from_l = &left->branch_info->from;
struct addr_map_symbol *from_r = &right->branch_info->from;
+ if (!left->branch_info || !right->branch_info)
+ return cmp_null(left->branch_info, right->branch_info);
+
+ from_l = &left->branch_info->from;
+ from_r = &right->branch_info->from;
+
if (!from_l->sym && !from_r->sym)
return _sort__addr_cmp(from_l->addr, from_r->addr);
static int64_t
sort__sym_to_cmp(struct hist_entry *left, struct hist_entry *right)
{
- struct addr_map_symbol *to_l = &left->branch_info->to;
- struct addr_map_symbol *to_r = &right->branch_info->to;
+ struct addr_map_symbol *to_l, *to_r;
+
+ if (!left->branch_info || !right->branch_info)
+ return cmp_null(left->branch_info, right->branch_info);
+
+ to_l = &left->branch_info->to;
+ to_r = &right->branch_info->to;
if (!to_l->sym && !to_r->sym)
return _sort__addr_cmp(to_l->addr, to_r->addr);
static int hist_entry__sym_from_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
- struct addr_map_symbol *from = &he->branch_info->from;
- return _hist_entry__sym_snprintf(from->map, from->sym, from->addr,
- he->level, bf, size, width);
+ if (he->branch_info) {
+ struct addr_map_symbol *from = &he->branch_info->from;
+ return _hist_entry__sym_snprintf(from->map, from->sym, from->addr,
+ he->level, bf, size, width);
+ }
+
+ return repsep_snprintf(bf, size, "%-*.*s", width, width, "N/A");
}
static int hist_entry__sym_to_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
- struct addr_map_symbol *to = &he->branch_info->to;
- return _hist_entry__sym_snprintf(to->map, to->sym, to->addr,
- he->level, bf, size, width);
+ if (he->branch_info) {
+ struct addr_map_symbol *to = &he->branch_info->to;
+ return _hist_entry__sym_snprintf(to->map, to->sym, to->addr,
+ he->level, bf, size, width);
+ }
+
+ return repsep_snprintf(bf, size, "%-*.*s", width, width, "N/A");
}
struct sort_entry sort_dso_from = {
static int64_t
sort__mispredict_cmp(struct hist_entry *left, struct hist_entry *right)
{
- const unsigned char mp = left->branch_info->flags.mispred !=
- right->branch_info->flags.mispred;
- const unsigned char p = left->branch_info->flags.predicted !=
- right->branch_info->flags.predicted;
+ unsigned char mp, p;
+
+ if (!left->branch_info || !right->branch_info)
+ return cmp_null(left->branch_info, right->branch_info);
+ mp = left->branch_info->flags.mispred != right->branch_info->flags.mispred;
+ p = left->branch_info->flags.predicted != right->branch_info->flags.predicted;
return mp || p;
}
size_t size, unsigned int width){
static const char *out = "N/A";
- if (he->branch_info->flags.predicted)
- out = "N";
- else if (he->branch_info->flags.mispred)
- out = "Y";
+ if (he->branch_info) {
+ if (he->branch_info->flags.predicted)
+ out = "N";
+ else if (he->branch_info->flags.mispred)
+ out = "Y";
+ }
return repsep_snprintf(bf, size, "%-*.*s", width, width, out);
}
static int64_t
sort__abort_cmp(struct hist_entry *left, struct hist_entry *right)
{
+ if (!left->branch_info || !right->branch_info)
+ return cmp_null(left->branch_info, right->branch_info);
+
return left->branch_info->flags.abort !=
right->branch_info->flags.abort;
}
static int hist_entry__abort_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
- static const char *out = ".";
+ static const char *out = "N/A";
+
+ if (he->branch_info) {
+ if (he->branch_info->flags.abort)
+ out = "A";
+ else
+ out = ".";
+ }
- if (he->branch_info->flags.abort)
- out = "A";
return repsep_snprintf(bf, size, "%-*s", width, out);
}
static int64_t
sort__in_tx_cmp(struct hist_entry *left, struct hist_entry *right)
{
+ if (!left->branch_info || !right->branch_info)
+ return cmp_null(left->branch_info, right->branch_info);
+
return left->branch_info->flags.in_tx !=
right->branch_info->flags.in_tx;
}
static int hist_entry__in_tx_snprintf(struct hist_entry *he, char *bf,
size_t size, unsigned int width)
{
- static const char *out = ".";
+ static const char *out = "N/A";
- if (he->branch_info->flags.in_tx)
- out = "T";
+ if (he->branch_info) {
+ if (he->branch_info->flags.in_tx)
+ out = "T";
+ else
+ out = ".";
+ }
return repsep_snprintf(bf, size, "%-*s", width, out);
}
#include "util/util.h"
#include "util/debug.h"
+#include "symbol.h"
+
#ifdef HAVE_LIBBFD_SUPPORT
/*
*/
#define A2L_FAIL_LIMIT 123
-char *get_srcline(struct dso *dso, unsigned long addr)
+char *get_srcline(struct dso *dso, unsigned long addr, struct symbol *sym,
+ bool show_sym)
{
char *file = NULL;
unsigned line = 0;
const char *dso_name;
if (!dso->has_srcline)
- return SRCLINE_UNKNOWN;
+ goto out;
if (dso->symsrc_filename)
dso_name = dso->symsrc_filename;
if (!addr2line(dso_name, addr, &file, &line, dso))
goto out;
- if (asprintf(&srcline, "%s:%u", file, line) < 0) {
+ if (asprintf(&srcline, "%s:%u", basename(file), line) < 0) {
free(file);
goto out;
}
dso->has_srcline = 0;
dso__free_a2l(dso);
}
- return SRCLINE_UNKNOWN;
+ if (sym) {
+ if (asprintf(&srcline, "%s+%ld", show_sym ? sym->name : "",
+ addr - sym->start) < 0)
+ return SRCLINE_UNKNOWN;
+ } else if (asprintf(&srcline, "%s[%lx]", dso->short_name, addr) < 0)
+ return SRCLINE_UNKNOWN;
+ return srcline;
}
void free_srcline(char *srcline)
#include <symbol/kallsyms.h>
#include "debug.h"
+#ifdef HAVE_CPLUS_DEMANGLE_SUPPORT
+extern char *cplus_demangle(const char *, int);
+
+static inline char *bfd_demangle(void __maybe_unused *v, const char *c, int i)
+{
+ return cplus_demangle(c, i);
+}
+#else
+#ifdef NO_DEMANGLE
+static inline char *bfd_demangle(void __maybe_unused *v,
+ const char __maybe_unused *c,
+ int __maybe_unused i)
+{
+ return NULL;
+}
+#else
+#define PACKAGE 'perf'
+#include <bfd.h>
+#endif
+#endif
+
#ifndef HAVE_ELF_GETPHDRNUM_SUPPORT
static int elf_getphdrnum(Elf *elf, size_t *dst)
{
return 0;
}
+static int decompress_kmodule(struct dso *dso, const char *name,
+ enum dso_binary_type type)
+{
+ int fd;
+ const char *ext = strrchr(name, '.');
+ char tmpbuf[] = "/tmp/perf-kmod-XXXXXX";
+
+ if ((type != DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE_COMP &&
+ type != DSO_BINARY_TYPE__GUEST_KMODULE_COMP) ||
+ type != dso->symtab_type)
+ return -1;
+
+ if (!ext || !is_supported_compression(ext + 1))
+ return -1;
+
+ fd = mkstemp(tmpbuf);
+ if (fd < 0)
+ return -1;
+
+ if (!decompress_to_file(ext + 1, name, fd)) {
+ close(fd);
+ fd = -1;
+ }
+
+ unlink(tmpbuf);
+
+ return fd;
+}
+
bool symsrc__possibly_runtime(struct symsrc *ss)
{
return ss->dynsym || ss->opdsec;
Elf *elf;
int fd;
- fd = open(name, O_RDONLY);
+ if (dso__needs_decompress(dso))
+ fd = decompress_kmodule(dso, name, type);
+ else
+ fd = open(name, O_RDONLY);
+
if (fd < 0)
return -1;
if (filename__read_build_id(ss->name, build_id, BUILD_ID_SIZE) > 0) {
dso__set_build_id(dso, build_id);
- return 1;
}
return 0;
}
DSO_BINARY_TYPE__BUILDID_DEBUGINFO,
DSO_BINARY_TYPE__SYSTEM_PATH_DSO,
DSO_BINARY_TYPE__GUEST_KMODULE,
+ DSO_BINARY_TYPE__GUEST_KMODULE_COMP,
DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE,
+ DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE_COMP,
DSO_BINARY_TYPE__OPENEMBEDDED_DEBUGINFO,
DSO_BINARY_TYPE__NOT_FOUND,
};
return dso->kernel == DSO_TYPE_GUEST_KERNEL;
case DSO_BINARY_TYPE__GUEST_KMODULE:
+ case DSO_BINARY_TYPE__GUEST_KMODULE_COMP:
case DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE:
+ case DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE_COMP:
/*
* kernel modules know their symtab type - it's set when
* creating a module dso in machine__new_module().
return -1;
kmod = dso->symtab_type == DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE ||
- dso->symtab_type == DSO_BINARY_TYPE__GUEST_KMODULE;
+ dso->symtab_type == DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE_COMP ||
+ dso->symtab_type == DSO_BINARY_TYPE__GUEST_KMODULE ||
+ dso->symtab_type == DSO_BINARY_TYPE__GUEST_KMODULE_COMP;
/*
* Iterate over candidate debug images.
symbol_filter_t filter)
{
int i, err = 0;
- char *filename;
+ char *filename = NULL;
- pr_debug("Looking at the vmlinux_path (%d entries long)\n",
- vmlinux_path__nr_entries + 1);
-
- filename = dso__build_id_filename(dso, NULL, 0);
+ if (!symbol_conf.ignore_vmlinux_buildid)
+ filename = dso__build_id_filename(dso, NULL, 0);
if (filename != NULL) {
err = dso__load_vmlinux(dso, map, filename, true, filter);
if (err > 0)
free(filename);
}
+ pr_debug("Looking at the vmlinux_path (%d entries long)\n",
+ vmlinux_path__nr_entries + 1);
+
for (i = 0; i < vmlinux_path__nr_entries; ++i) {
err = dso__load_vmlinux(dso, map, vmlinux_path[i], false, filter);
if (err > 0)
#include "dso.h"
-#ifdef HAVE_CPLUS_DEMANGLE_SUPPORT
-extern char *cplus_demangle(const char *, int);
-
-static inline char *bfd_demangle(void __maybe_unused *v, const char *c, int i)
-{
- return cplus_demangle(c, i);
-}
-#else
-#ifdef NO_DEMANGLE
-static inline char *bfd_demangle(void __maybe_unused *v,
- const char __maybe_unused *c,
- int __maybe_unused i)
-{
- return NULL;
-}
-#else
-#define PACKAGE 'perf'
-#include <bfd.h>
-#endif
-#endif
-
/*
* libelf 0.8.x and earlier do not support ELF_C_READ_MMAP;
* for newer versions we can use mmap to reduce memory usage:
unsigned short nr_events;
bool try_vmlinux_path,
ignore_vmlinux,
+ ignore_vmlinux_buildid,
show_kernel_path,
use_modules,
sort_by_name,
demangle,
demangle_kernel,
filter_relative,
- show_hist_headers;
+ show_hist_headers,
+ branch_callstack;
const char *vmlinux_name,
*kallsyms_name,
*source_prefix,
--- /dev/null
+/*
+ * thread-stack.c: Synthesize a thread's stack using call / return events
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#include <linux/rbtree.h>
+#include <linux/list.h>
+#include "thread.h"
+#include "event.h"
+#include "machine.h"
+#include "util.h"
+#include "debug.h"
+#include "symbol.h"
+#include "comm.h"
+#include "thread-stack.h"
+
+#define CALL_PATH_BLOCK_SHIFT 8
+#define CALL_PATH_BLOCK_SIZE (1 << CALL_PATH_BLOCK_SHIFT)
+#define CALL_PATH_BLOCK_MASK (CALL_PATH_BLOCK_SIZE - 1)
+
+struct call_path_block {
+ struct call_path cp[CALL_PATH_BLOCK_SIZE];
+ struct list_head node;
+};
+
+/**
+ * struct call_path_root - root of all call paths.
+ * @call_path: root call path
+ * @blocks: list of blocks to store call paths
+ * @next: next free space
+ * @sz: number of spaces
+ */
+struct call_path_root {
+ struct call_path call_path;
+ struct list_head blocks;
+ size_t next;
+ size_t sz;
+};
+
+/**
+ * struct call_return_processor - provides a call-back to consume call-return
+ * information.
+ * @cpr: call path root
+ * @process: call-back that accepts call/return information
+ * @data: anonymous data for call-back
+ */
+struct call_return_processor {
+ struct call_path_root *cpr;
+ int (*process)(struct call_return *cr, void *data);
+ void *data;
+};
+
+#define STACK_GROWTH 2048
+
+/**
+ * struct thread_stack_entry - thread stack entry.
+ * @ret_addr: return address
+ * @timestamp: timestamp (if known)
+ * @ref: external reference (e.g. db_id of sample)
+ * @branch_count: the branch count when the entry was created
+ * @cp: call path
+ * @no_call: a 'call' was not seen
+ */
+struct thread_stack_entry {
+ u64 ret_addr;
+ u64 timestamp;
+ u64 ref;
+ u64 branch_count;
+ struct call_path *cp;
+ bool no_call;
+};
+
+/**
+ * struct thread_stack - thread stack constructed from 'call' and 'return'
+ * branch samples.
+ * @stack: array that holds the stack
+ * @cnt: number of entries in the stack
+ * @sz: current maximum stack size
+ * @trace_nr: current trace number
+ * @branch_count: running branch count
+ * @kernel_start: kernel start address
+ * @last_time: last timestamp
+ * @crp: call/return processor
+ * @comm: current comm
+ */
+struct thread_stack {
+ struct thread_stack_entry *stack;
+ size_t cnt;
+ size_t sz;
+ u64 trace_nr;
+ u64 branch_count;
+ u64 kernel_start;
+ u64 last_time;
+ struct call_return_processor *crp;
+ struct comm *comm;
+};
+
+static int thread_stack__grow(struct thread_stack *ts)
+{
+ struct thread_stack_entry *new_stack;
+ size_t sz, new_sz;
+
+ new_sz = ts->sz + STACK_GROWTH;
+ sz = new_sz * sizeof(struct thread_stack_entry);
+
+ new_stack = realloc(ts->stack, sz);
+ if (!new_stack)
+ return -ENOMEM;
+
+ ts->stack = new_stack;
+ ts->sz = new_sz;
+
+ return 0;
+}
+
+static struct thread_stack *thread_stack__new(struct thread *thread,
+ struct call_return_processor *crp)
+{
+ struct thread_stack *ts;
+
+ ts = zalloc(sizeof(struct thread_stack));
+ if (!ts)
+ return NULL;
+
+ if (thread_stack__grow(ts)) {
+ free(ts);
+ return NULL;
+ }
+
+ if (thread->mg && thread->mg->machine)
+ ts->kernel_start = machine__kernel_start(thread->mg->machine);
+ else
+ ts->kernel_start = 1ULL << 63;
+ ts->crp = crp;
+
+ return ts;
+}
+
+static int thread_stack__push(struct thread_stack *ts, u64 ret_addr)
+{
+ int err = 0;
+
+ if (ts->cnt == ts->sz) {
+ err = thread_stack__grow(ts);
+ if (err) {
+ pr_warning("Out of memory: discarding thread stack\n");
+ ts->cnt = 0;
+ }
+ }
+
+ ts->stack[ts->cnt++].ret_addr = ret_addr;
+
+ return err;
+}
+
+static void thread_stack__pop(struct thread_stack *ts, u64 ret_addr)
+{
+ size_t i;
+
+ /*
+ * In some cases there may be functions which are not seen to return.
+ * For example when setjmp / longjmp has been used. Or the perf context
+ * switch in the kernel which doesn't stop and start tracing in exactly
+ * the same code path. When that happens the return address will be
+ * further down the stack. If the return address is not found at all,
+ * we assume the opposite (i.e. this is a return for a call that wasn't
+ * seen for some reason) and leave the stack alone.
+ */
+ for (i = ts->cnt; i; ) {
+ if (ts->stack[--i].ret_addr == ret_addr) {
+ ts->cnt = i;
+ return;
+ }
+ }
+}
+
+static bool thread_stack__in_kernel(struct thread_stack *ts)
+{
+ if (!ts->cnt)
+ return false;
+
+ return ts->stack[ts->cnt - 1].cp->in_kernel;
+}
+
+static int thread_stack__call_return(struct thread *thread,
+ struct thread_stack *ts, size_t idx,
+ u64 timestamp, u64 ref, bool no_return)
+{
+ struct call_return_processor *crp = ts->crp;
+ struct thread_stack_entry *tse;
+ struct call_return cr = {
+ .thread = thread,
+ .comm = ts->comm,
+ .db_id = 0,
+ };
+
+ tse = &ts->stack[idx];
+ cr.cp = tse->cp;
+ cr.call_time = tse->timestamp;
+ cr.return_time = timestamp;
+ cr.branch_count = ts->branch_count - tse->branch_count;
+ cr.call_ref = tse->ref;
+ cr.return_ref = ref;
+ if (tse->no_call)
+ cr.flags |= CALL_RETURN_NO_CALL;
+ if (no_return)
+ cr.flags |= CALL_RETURN_NO_RETURN;
+
+ return crp->process(&cr, crp->data);
+}
+
+static int thread_stack__flush(struct thread *thread, struct thread_stack *ts)
+{
+ struct call_return_processor *crp = ts->crp;
+ int err;
+
+ if (!crp) {
+ ts->cnt = 0;
+ return 0;
+ }
+
+ while (ts->cnt) {
+ err = thread_stack__call_return(thread, ts, --ts->cnt,
+ ts->last_time, 0, true);
+ if (err) {
+ pr_err("Error flushing thread stack!\n");
+ ts->cnt = 0;
+ return err;
+ }
+ }
+
+ return 0;
+}
+
+int thread_stack__event(struct thread *thread, u32 flags, u64 from_ip,
+ u64 to_ip, u16 insn_len, u64 trace_nr)
+{
+ if (!thread)
+ return -EINVAL;
+
+ if (!thread->ts) {
+ thread->ts = thread_stack__new(thread, NULL);
+ if (!thread->ts) {
+ pr_warning("Out of memory: no thread stack\n");
+ return -ENOMEM;
+ }
+ thread->ts->trace_nr = trace_nr;
+ }
+
+ /*
+ * When the trace is discontinuous, the trace_nr changes. In that case
+ * the stack might be completely invalid. Better to report nothing than
+ * to report something misleading, so flush the stack.
+ */
+ if (trace_nr != thread->ts->trace_nr) {
+ if (thread->ts->trace_nr)
+ thread_stack__flush(thread, thread->ts);
+ thread->ts->trace_nr = trace_nr;
+ }
+
+ /* Stop here if thread_stack__process() is in use */
+ if (thread->ts->crp)
+ return 0;
+
+ if (flags & PERF_IP_FLAG_CALL) {
+ u64 ret_addr;
+
+ if (!to_ip)
+ return 0;
+ ret_addr = from_ip + insn_len;
+ if (ret_addr == to_ip)
+ return 0; /* Zero-length calls are excluded */
+ return thread_stack__push(thread->ts, ret_addr);
+ } else if (flags & PERF_IP_FLAG_RETURN) {
+ if (!from_ip)
+ return 0;
+ thread_stack__pop(thread->ts, to_ip);
+ }
+
+ return 0;
+}
+
+void thread_stack__set_trace_nr(struct thread *thread, u64 trace_nr)
+{
+ if (!thread || !thread->ts)
+ return;
+
+ if (trace_nr != thread->ts->trace_nr) {
+ if (thread->ts->trace_nr)
+ thread_stack__flush(thread, thread->ts);
+ thread->ts->trace_nr = trace_nr;
+ }
+}
+
+void thread_stack__free(struct thread *thread)
+{
+ if (thread->ts) {
+ thread_stack__flush(thread, thread->ts);
+ zfree(&thread->ts->stack);
+ zfree(&thread->ts);
+ }
+}
+
+void thread_stack__sample(struct thread *thread, struct ip_callchain *chain,
+ size_t sz, u64 ip)
+{
+ size_t i;
+
+ if (!thread || !thread->ts)
+ chain->nr = 1;
+ else
+ chain->nr = min(sz, thread->ts->cnt + 1);
+
+ chain->ips[0] = ip;
+
+ for (i = 1; i < chain->nr; i++)
+ chain->ips[i] = thread->ts->stack[thread->ts->cnt - i].ret_addr;
+}
+
+static void call_path__init(struct call_path *cp, struct call_path *parent,
+ struct symbol *sym, u64 ip, bool in_kernel)
+{
+ cp->parent = parent;
+ cp->sym = sym;
+ cp->ip = sym ? 0 : ip;
+ cp->db_id = 0;
+ cp->in_kernel = in_kernel;
+ RB_CLEAR_NODE(&cp->rb_node);
+ cp->children = RB_ROOT;
+}
+
+static struct call_path_root *call_path_root__new(void)
+{
+ struct call_path_root *cpr;
+
+ cpr = zalloc(sizeof(struct call_path_root));
+ if (!cpr)
+ return NULL;
+ call_path__init(&cpr->call_path, NULL, NULL, 0, false);
+ INIT_LIST_HEAD(&cpr->blocks);
+ return cpr;
+}
+
+static void call_path_root__free(struct call_path_root *cpr)
+{
+ struct call_path_block *pos, *n;
+
+ list_for_each_entry_safe(pos, n, &cpr->blocks, node) {
+ list_del(&pos->node);
+ free(pos);
+ }
+ free(cpr);
+}
+
+static struct call_path *call_path__new(struct call_path_root *cpr,
+ struct call_path *parent,
+ struct symbol *sym, u64 ip,
+ bool in_kernel)
+{
+ struct call_path_block *cpb;
+ struct call_path *cp;
+ size_t n;
+
+ if (cpr->next < cpr->sz) {
+ cpb = list_last_entry(&cpr->blocks, struct call_path_block,
+ node);
+ } else {
+ cpb = zalloc(sizeof(struct call_path_block));
+ if (!cpb)
+ return NULL;
+ list_add_tail(&cpb->node, &cpr->blocks);
+ cpr->sz += CALL_PATH_BLOCK_SIZE;
+ }
+
+ n = cpr->next++ & CALL_PATH_BLOCK_MASK;
+ cp = &cpb->cp[n];
+
+ call_path__init(cp, parent, sym, ip, in_kernel);
+
+ return cp;
+}
+
+static struct call_path *call_path__findnew(struct call_path_root *cpr,
+ struct call_path *parent,
+ struct symbol *sym, u64 ip, u64 ks)
+{
+ struct rb_node **p;
+ struct rb_node *node_parent = NULL;
+ struct call_path *cp;
+ bool in_kernel = ip >= ks;
+
+ if (sym)
+ ip = 0;
+
+ if (!parent)
+ return call_path__new(cpr, parent, sym, ip, in_kernel);
+
+ p = &parent->children.rb_node;
+ while (*p != NULL) {
+ node_parent = *p;
+ cp = rb_entry(node_parent, struct call_path, rb_node);
+
+ if (cp->sym == sym && cp->ip == ip)
+ return cp;
+
+ if (sym < cp->sym || (sym == cp->sym && ip < cp->ip))
+ p = &(*p)->rb_left;
+ else
+ p = &(*p)->rb_right;
+ }
+
+ cp = call_path__new(cpr, parent, sym, ip, in_kernel);
+ if (!cp)
+ return NULL;
+
+ rb_link_node(&cp->rb_node, node_parent, p);
+ rb_insert_color(&cp->rb_node, &parent->children);
+
+ return cp;
+}
+
+struct call_return_processor *
+call_return_processor__new(int (*process)(struct call_return *cr, void *data),
+ void *data)
+{
+ struct call_return_processor *crp;
+
+ crp = zalloc(sizeof(struct call_return_processor));
+ if (!crp)
+ return NULL;
+ crp->cpr = call_path_root__new();
+ if (!crp->cpr)
+ goto out_free;
+ crp->process = process;
+ crp->data = data;
+ return crp;
+
+out_free:
+ free(crp);
+ return NULL;
+}
+
+void call_return_processor__free(struct call_return_processor *crp)
+{
+ if (crp) {
+ call_path_root__free(crp->cpr);
+ free(crp);
+ }
+}
+
+static int thread_stack__push_cp(struct thread_stack *ts, u64 ret_addr,
+ u64 timestamp, u64 ref, struct call_path *cp,
+ bool no_call)
+{
+ struct thread_stack_entry *tse;
+ int err;
+
+ if (ts->cnt == ts->sz) {
+ err = thread_stack__grow(ts);
+ if (err)
+ return err;
+ }
+
+ tse = &ts->stack[ts->cnt++];
+ tse->ret_addr = ret_addr;
+ tse->timestamp = timestamp;
+ tse->ref = ref;
+ tse->branch_count = ts->branch_count;
+ tse->cp = cp;
+ tse->no_call = no_call;
+
+ return 0;
+}
+
+static int thread_stack__pop_cp(struct thread *thread, struct thread_stack *ts,
+ u64 ret_addr, u64 timestamp, u64 ref,
+ struct symbol *sym)
+{
+ int err;
+
+ if (!ts->cnt)
+ return 1;
+
+ if (ts->cnt == 1) {
+ struct thread_stack_entry *tse = &ts->stack[0];
+
+ if (tse->cp->sym == sym)
+ return thread_stack__call_return(thread, ts, --ts->cnt,
+ timestamp, ref, false);
+ }
+
+ if (ts->stack[ts->cnt - 1].ret_addr == ret_addr) {
+ return thread_stack__call_return(thread, ts, --ts->cnt,
+ timestamp, ref, false);
+ } else {
+ size_t i = ts->cnt - 1;
+
+ while (i--) {
+ if (ts->stack[i].ret_addr != ret_addr)
+ continue;
+ i += 1;
+ while (ts->cnt > i) {
+ err = thread_stack__call_return(thread, ts,
+ --ts->cnt,
+ timestamp, ref,
+ true);
+ if (err)
+ return err;
+ }
+ return thread_stack__call_return(thread, ts, --ts->cnt,
+ timestamp, ref, false);
+ }
+ }
+
+ return 1;
+}
+
+static int thread_stack__bottom(struct thread *thread, struct thread_stack *ts,
+ struct perf_sample *sample,
+ struct addr_location *from_al,
+ struct addr_location *to_al, u64 ref)
+{
+ struct call_path_root *cpr = ts->crp->cpr;
+ struct call_path *cp;
+ struct symbol *sym;
+ u64 ip;
+
+ if (sample->ip) {
+ ip = sample->ip;
+ sym = from_al->sym;
+ } else if (sample->addr) {
+ ip = sample->addr;
+ sym = to_al->sym;
+ } else {
+ return 0;
+ }
+
+ cp = call_path__findnew(cpr, &cpr->call_path, sym, ip,
+ ts->kernel_start);
+ if (!cp)
+ return -ENOMEM;
+
+ return thread_stack__push_cp(thread->ts, ip, sample->time, ref, cp,
+ true);
+}
+
+static int thread_stack__no_call_return(struct thread *thread,
+ struct thread_stack *ts,
+ struct perf_sample *sample,
+ struct addr_location *from_al,
+ struct addr_location *to_al, u64 ref)
+{
+ struct call_path_root *cpr = ts->crp->cpr;
+ struct call_path *cp, *parent;
+ u64 ks = ts->kernel_start;
+ int err;
+
+ if (sample->ip >= ks && sample->addr < ks) {
+ /* Return to userspace, so pop all kernel addresses */
+ while (thread_stack__in_kernel(ts)) {
+ err = thread_stack__call_return(thread, ts, --ts->cnt,
+ sample->time, ref,
+ true);
+ if (err)
+ return err;
+ }
+
+ /* If the stack is empty, push the userspace address */
+ if (!ts->cnt) {
+ cp = call_path__findnew(cpr, &cpr->call_path,
+ to_al->sym, sample->addr,
+ ts->kernel_start);
+ if (!cp)
+ return -ENOMEM;
+ return thread_stack__push_cp(ts, 0, sample->time, ref,
+ cp, true);
+ }
+ } else if (thread_stack__in_kernel(ts) && sample->ip < ks) {
+ /* Return to userspace, so pop all kernel addresses */
+ while (thread_stack__in_kernel(ts)) {
+ err = thread_stack__call_return(thread, ts, --ts->cnt,
+ sample->time, ref,
+ true);
+ if (err)
+ return err;
+ }
+ }
+
+ if (ts->cnt)
+ parent = ts->stack[ts->cnt - 1].cp;
+ else
+ parent = &cpr->call_path;
+
+ /* This 'return' had no 'call', so push and pop top of stack */
+ cp = call_path__findnew(cpr, parent, from_al->sym, sample->ip,
+ ts->kernel_start);
+ if (!cp)
+ return -ENOMEM;
+
+ err = thread_stack__push_cp(ts, sample->addr, sample->time, ref, cp,
+ true);
+ if (err)
+ return err;
+
+ return thread_stack__pop_cp(thread, ts, sample->addr, sample->time, ref,
+ to_al->sym);
+}
+
+static int thread_stack__trace_begin(struct thread *thread,
+ struct thread_stack *ts, u64 timestamp,
+ u64 ref)
+{
+ struct thread_stack_entry *tse;
+ int err;
+
+ if (!ts->cnt)
+ return 0;
+
+ /* Pop trace end */
+ tse = &ts->stack[ts->cnt - 1];
+ if (tse->cp->sym == NULL && tse->cp->ip == 0) {
+ err = thread_stack__call_return(thread, ts, --ts->cnt,
+ timestamp, ref, false);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+static int thread_stack__trace_end(struct thread_stack *ts,
+ struct perf_sample *sample, u64 ref)
+{
+ struct call_path_root *cpr = ts->crp->cpr;
+ struct call_path *cp;
+ u64 ret_addr;
+
+ /* No point having 'trace end' on the bottom of the stack */
+ if (!ts->cnt || (ts->cnt == 1 && ts->stack[0].ref == ref))
+ return 0;
+
+ cp = call_path__findnew(cpr, ts->stack[ts->cnt - 1].cp, NULL, 0,
+ ts->kernel_start);
+ if (!cp)
+ return -ENOMEM;
+
+ ret_addr = sample->ip + sample->insn_len;
+
+ return thread_stack__push_cp(ts, ret_addr, sample->time, ref, cp,
+ false);
+}
+
+int thread_stack__process(struct thread *thread, struct comm *comm,
+ struct perf_sample *sample,
+ struct addr_location *from_al,
+ struct addr_location *to_al, u64 ref,
+ struct call_return_processor *crp)
+{
+ struct thread_stack *ts = thread->ts;
+ int err = 0;
+
+ if (ts) {
+ if (!ts->crp) {
+ /* Supersede thread_stack__event() */
+ thread_stack__free(thread);
+ thread->ts = thread_stack__new(thread, crp);
+ if (!thread->ts)
+ return -ENOMEM;
+ ts = thread->ts;
+ ts->comm = comm;
+ }
+ } else {
+ thread->ts = thread_stack__new(thread, crp);
+ if (!thread->ts)
+ return -ENOMEM;
+ ts = thread->ts;
+ ts->comm = comm;
+ }
+
+ /* Flush stack on exec */
+ if (ts->comm != comm && thread->pid_ == thread->tid) {
+ err = thread_stack__flush(thread, ts);
+ if (err)
+ return err;
+ ts->comm = comm;
+ }
+
+ /* If the stack is empty, put the current symbol on the stack */
+ if (!ts->cnt) {
+ err = thread_stack__bottom(thread, ts, sample, from_al, to_al,
+ ref);
+ if (err)
+ return err;
+ }
+
+ ts->branch_count += 1;
+ ts->last_time = sample->time;
+
+ if (sample->flags & PERF_IP_FLAG_CALL) {
+ struct call_path_root *cpr = ts->crp->cpr;
+ struct call_path *cp;
+ u64 ret_addr;
+
+ if (!sample->ip || !sample->addr)
+ return 0;
+
+ ret_addr = sample->ip + sample->insn_len;
+ if (ret_addr == sample->addr)
+ return 0; /* Zero-length calls are excluded */
+
+ cp = call_path__findnew(cpr, ts->stack[ts->cnt - 1].cp,
+ to_al->sym, sample->addr,
+ ts->kernel_start);
+ if (!cp)
+ return -ENOMEM;
+ err = thread_stack__push_cp(ts, ret_addr, sample->time, ref,
+ cp, false);
+ } else if (sample->flags & PERF_IP_FLAG_RETURN) {
+ if (!sample->ip || !sample->addr)
+ return 0;
+
+ err = thread_stack__pop_cp(thread, ts, sample->addr,
+ sample->time, ref, from_al->sym);
+ if (err) {
+ if (err < 0)
+ return err;
+ err = thread_stack__no_call_return(thread, ts, sample,
+ from_al, to_al, ref);
+ }
+ } else if (sample->flags & PERF_IP_FLAG_TRACE_BEGIN) {
+ err = thread_stack__trace_begin(thread, ts, sample->time, ref);
+ } else if (sample->flags & PERF_IP_FLAG_TRACE_END) {
+ err = thread_stack__trace_end(ts, sample, ref);
+ }
+
+ return err;
+}
--- /dev/null
+/*
+ * thread-stack.h: Synthesize a thread's stack using call / return events
+ * Copyright (c) 2014, Intel Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ */
+
+#ifndef __PERF_THREAD_STACK_H
+#define __PERF_THREAD_STACK_H
+
+#include <sys/types.h>
+
+#include <linux/types.h>
+#include <linux/rbtree.h>
+
+struct thread;
+struct comm;
+struct ip_callchain;
+struct symbol;
+struct dso;
+struct call_return_processor;
+struct comm;
+struct perf_sample;
+struct addr_location;
+
+/*
+ * Call/Return flags.
+ *
+ * CALL_RETURN_NO_CALL: 'return' but no matching 'call'
+ * CALL_RETURN_NO_RETURN: 'call' but no matching 'return'
+ */
+enum {
+ CALL_RETURN_NO_CALL = 1 << 0,
+ CALL_RETURN_NO_RETURN = 1 << 1,
+};
+
+/**
+ * struct call_return - paired call/return information.
+ * @thread: thread in which call/return occurred
+ * @comm: comm in which call/return occurred
+ * @cp: call path
+ * @call_time: timestamp of call (if known)
+ * @return_time: timestamp of return (if known)
+ * @branch_count: number of branches seen between call and return
+ * @call_ref: external reference to 'call' sample (e.g. db_id)
+ * @return_ref: external reference to 'return' sample (e.g. db_id)
+ * @db_id: id used for db-export
+ * @flags: Call/Return flags
+ */
+struct call_return {
+ struct thread *thread;
+ struct comm *comm;
+ struct call_path *cp;
+ u64 call_time;
+ u64 return_time;
+ u64 branch_count;
+ u64 call_ref;
+ u64 return_ref;
+ u64 db_id;
+ u32 flags;
+};
+
+/**
+ * struct call_path - node in list of calls leading to a function call.
+ * @parent: call path to the parent function call
+ * @sym: symbol of function called
+ * @ip: only if sym is null, the ip of the function
+ * @db_id: id used for db-export
+ * @in_kernel: whether function is a in the kernel
+ * @rb_node: node in parent's tree of called functions
+ * @children: tree of call paths of functions called
+ *
+ * In combination with the call_return structure, the call_path structure
+ * defines a context-sensitve call-graph.
+ */
+struct call_path {
+ struct call_path *parent;
+ struct symbol *sym;
+ u64 ip;
+ u64 db_id;
+ bool in_kernel;
+ struct rb_node rb_node;
+ struct rb_root children;
+};
+
+int thread_stack__event(struct thread *thread, u32 flags, u64 from_ip,
+ u64 to_ip, u16 insn_len, u64 trace_nr);
+void thread_stack__set_trace_nr(struct thread *thread, u64 trace_nr);
+void thread_stack__sample(struct thread *thread, struct ip_callchain *chain,
+ size_t sz, u64 ip);
+void thread_stack__free(struct thread *thread);
+
+struct call_return_processor *
+call_return_processor__new(int (*process)(struct call_return *cr, void *data),
+ void *data);
+void call_return_processor__free(struct call_return_processor *crp);
+int thread_stack__process(struct thread *thread, struct comm *comm,
+ struct perf_sample *sample,
+ struct addr_location *from_al,
+ struct addr_location *to_al, u64 ref,
+ struct call_return_processor *crp);
+
+#endif
#include <string.h>
#include "session.h"
#include "thread.h"
+#include "thread-stack.h"
#include "util.h"
#include "debug.h"
#include "comm.h"
pid_t pid = thread->pid_;
if (pid == thread->tid || pid == -1) {
- thread->mg = map_groups__new();
+ thread->mg = map_groups__new(machine);
} else {
leader = machine__findnew_thread(machine, pid, pid);
if (leader)
{
struct comm *comm, *tmp;
+ thread_stack__free(thread);
+
if (thread->mg) {
map_groups__put(thread->mg);
thread->mg = NULL;
return last;
}
-/* CHECKME: time should always be 0 if event aren't ordered */
int __thread__set_comm(struct thread *thread, const char *str, u64 timestamp,
bool exec)
{
struct comm *new, *curr = thread__comm(thread);
int err;
- /* Override latest entry if it had no specific time coverage */
- if (!curr->start && !curr->exec) {
+ /* Override the default :tid entry */
+ if (!thread->comm_set) {
err = comm__override(curr, str, timestamp, exec);
if (err)
return err;
if (!new)
return -ENOMEM;
list_add(&new->list, &thread->comm_list);
+
+ if (exec)
+ unwind__flush_access(thread);
}
thread->comm_set = true;
}
void thread__find_cpumode_addr_location(struct thread *thread,
- struct machine *machine,
enum map_type type, u64 addr,
struct addr_location *al)
{
};
for (i = 0; i < ARRAY_SIZE(cpumodes); i++) {
- thread__find_addr_location(thread, machine, cpumodes[i], type,
- addr, al);
+ thread__find_addr_location(thread, cpumodes[i], type, addr, al);
if (al->map)
break;
}
#include "symbol.h"
#include <strlist.h>
+struct thread_stack;
+
struct thread {
union {
struct rb_node rb_node;
bool dead; /* if set thread has exited */
struct list_head comm_list;
int comm_len;
+ u64 db_id;
void *priv;
+ struct thread_stack *ts;
};
struct machine;
int thread__fork(struct thread *thread, struct thread *parent, u64 timestamp);
size_t thread__fprintf(struct thread *thread, FILE *fp);
-void thread__find_addr_map(struct thread *thread, struct machine *machine,
+void thread__find_addr_map(struct thread *thread,
u8 cpumode, enum map_type type, u64 addr,
struct addr_location *al);
-void thread__find_addr_location(struct thread *thread, struct machine *machine,
+void thread__find_addr_location(struct thread *thread,
u8 cpumode, enum map_type type, u64 addr,
struct addr_location *al);
void thread__find_cpumode_addr_location(struct thread *thread,
- struct machine *machine,
enum map_type type, u64 addr,
struct addr_location *al);
event_attr_op attr;
event_op2 tracing_data;
event_op2 finished_round,
- build_id;
+ build_id,
+ id_index;
bool ordered_events;
bool ordering_requires_timestamps;
};
Dwfl_Module *mod;
struct dso *dso = NULL;
- thread__find_addr_location(ui->thread, ui->machine,
+ thread__find_addr_location(ui->thread,
PERF_RECORD_MISC_USER,
MAP__FUNCTION, ip, al);
struct addr_location al;
ssize_t size;
- thread__find_addr_map(ui->thread, ui->machine, PERF_RECORD_MISC_USER,
+ thread__find_addr_map(ui->thread, PERF_RECORD_MISC_USER,
MAP__FUNCTION, addr, &al);
if (!al.map) {
pr_debug("unwind: no map for %lx\n", (unsigned long)addr);
}
int unwind__get_entries(unwind_entry_cb_t cb, void *arg,
- struct machine *machine, struct thread *thread,
+ struct thread *thread,
struct perf_sample *data,
int max_stack)
{
struct unwind_info ui = {
.sample = data,
.thread = thread,
- .machine = machine,
+ .machine = thread->mg->machine,
.cb = cb,
.arg = arg,
.max_stack = max_stack,
{
struct addr_location al;
- thread__find_addr_map(ui->thread, ui->machine, PERF_RECORD_MISC_USER,
+ thread__find_addr_map(ui->thread, PERF_RECORD_MISC_USER,
MAP__FUNCTION, ip, &al);
return al.map;
}
struct addr_location al;
ssize_t size;
- thread__find_addr_map(ui->thread, ui->machine, PERF_RECORD_MISC_USER,
+ thread__find_addr_map(ui->thread, PERF_RECORD_MISC_USER,
MAP__FUNCTION, addr, &al);
if (!al.map) {
pr_debug("unwind: no map for %lx\n", (unsigned long)addr);
pr_debug("unwind: put_unwind_info called\n");
}
-static int entry(u64 ip, struct thread *thread, struct machine *machine,
+static int entry(u64 ip, struct thread *thread,
unwind_entry_cb_t cb, void *arg)
{
struct unwind_entry e;
struct addr_location al;
- thread__find_addr_location(thread, machine,
- PERF_RECORD_MISC_USER,
+ thread__find_addr_location(thread, PERF_RECORD_MISC_USER,
MAP__FUNCTION, ip, &al);
e.ip = ip;
return -ENOMEM;
}
+ unw_set_caching_policy(addr_space, UNW_CACHE_GLOBAL);
thread__set_priv(thread, addr_space);
return 0;
}
+void unwind__flush_access(struct thread *thread)
+{
+ unw_addr_space_t addr_space;
+
+ if (callchain_param.record_mode != CALLCHAIN_DWARF)
+ return;
+
+ addr_space = thread__priv(thread);
+ unw_flush_cache(addr_space, 0, 0);
+}
+
void unwind__finish_access(struct thread *thread)
{
unw_addr_space_t addr_space;
unw_word_t ip;
unw_get_reg(&c, UNW_REG_IP, &ip);
- ret = ip ? entry(ip, ui->thread, ui->machine, cb, arg) : 0;
+ ret = ip ? entry(ip, ui->thread, cb, arg) : 0;
}
return ret;
}
int unwind__get_entries(unwind_entry_cb_t cb, void *arg,
- struct machine *machine, struct thread *thread,
+ struct thread *thread,
struct perf_sample *data, int max_stack)
{
u64 ip;
struct unwind_info ui = {
.sample = data,
.thread = thread,
- .machine = machine,
+ .machine = thread->mg->machine,
};
int ret;
if (ret)
return ret;
- ret = entry(ip, thread, machine, cb, arg);
+ ret = entry(ip, thread, cb, arg);
if (ret)
return -ENOMEM;
#ifdef HAVE_DWARF_UNWIND_SUPPORT
int unwind__get_entries(unwind_entry_cb_t cb, void *arg,
- struct machine *machine,
struct thread *thread,
struct perf_sample *data, int max_stack);
/* libunwind specific */
#ifdef HAVE_LIBUNWIND_SUPPORT
int libunwind__arch_reg_id(int regnum);
int unwind__prepare_access(struct thread *thread);
+void unwind__flush_access(struct thread *thread);
void unwind__finish_access(struct thread *thread);
#else
static inline int unwind__prepare_access(struct thread *thread __maybe_unused)
return 0;
}
+static inline void unwind__flush_access(struct thread *thread __maybe_unused) {}
static inline void unwind__finish_access(struct thread *thread __maybe_unused) {}
#endif
#else
static inline int
unwind__get_entries(unwind_entry_cb_t cb __maybe_unused,
void *arg __maybe_unused,
- struct machine *machine __maybe_unused,
struct thread *thread __maybe_unused,
struct perf_sample *data __maybe_unused,
int max_stack __maybe_unused)
return 0;
}
+static inline void unwind__flush_access(struct thread *thread __maybe_unused) {}
static inline void unwind__finish_access(struct thread *thread __maybe_unused) {}
#endif /* HAVE_DWARF_UNWIND_SUPPORT */
#endif /* __UNWIND_H */
extern int prefixcmp(const char *str, const char *prefix);
extern void set_buildid_dir(void);
-extern void disable_buildid_cache(void);
static inline const char *skip_prefix(const char *str, const char *prefix)
{
}
struct dso;
+struct symbol;
-char *get_srcline(struct dso *dso, unsigned long addr);
+char *get_srcline(struct dso *dso, unsigned long addr, struct symbol *sym,
+ bool show_sym);
void free_srcline(char *srcline);
int filename__read_int(const char *filename, int *value);
const char *get_filename_for_perf_kvm(void);
bool find_process(const char *name);
+
+#ifdef HAVE_ZLIB_SUPPORT
+int gzip_decompress_to_file(const char *input, int output_fd);
+#endif
+
#endif /* GIT_COMPAT_UTIL_H */
#include "util.h"
#include "symbol.h"
#include "machine.h"
+#include "thread.h"
#include "linux/string.h"
#include "debug.h"
+/*
+ * Include definition of find_vdso_map() also used in perf-read-vdso.c for
+ * building perf-read-vdso32 and perf-read-vdsox32.
+ */
+#include "find-vdso-map.c"
+
#define VDSO__TEMP_FILE_NAME "/tmp/perf-vdso.so-XXXXXX"
struct vdso_file {
bool error;
char temp_file_name[sizeof(VDSO__TEMP_FILE_NAME)];
const char *dso_name;
+ const char *read_prog;
};
struct vdso_info {
struct vdso_file vdso;
+#if BITS_PER_LONG == 64
+ struct vdso_file vdso32;
+ struct vdso_file vdsox32;
+#endif
};
static struct vdso_info *vdso_info__new(void)
.temp_file_name = VDSO__TEMP_FILE_NAME,
.dso_name = DSO__NAME_VDSO,
},
+#if BITS_PER_LONG == 64
+ .vdso32 = {
+ .temp_file_name = VDSO__TEMP_FILE_NAME,
+ .dso_name = DSO__NAME_VDSO32,
+ .read_prog = "perf-read-vdso32",
+ },
+ .vdsox32 = {
+ .temp_file_name = VDSO__TEMP_FILE_NAME,
+ .dso_name = DSO__NAME_VDSOX32,
+ .read_prog = "perf-read-vdsox32",
+ },
+#endif
};
return memdup(&vdso_info_init, sizeof(vdso_info_init));
}
-static int find_vdso_map(void **start, void **end)
-{
- FILE *maps;
- char line[128];
- int found = 0;
-
- maps = fopen("/proc/self/maps", "r");
- if (!maps) {
- pr_err("vdso: cannot open maps\n");
- return -1;
- }
-
- while (!found && fgets(line, sizeof(line), maps)) {
- int m = -1;
-
- /* We care only about private r-x mappings. */
- if (2 != sscanf(line, "%p-%p r-xp %*x %*x:%*x %*u %n",
- start, end, &m))
- continue;
- if (m < 0)
- continue;
-
- if (!strncmp(&line[m], VDSO__MAP_NAME,
- sizeof(VDSO__MAP_NAME) - 1))
- found = 1;
- }
-
- fclose(maps);
- return !found;
-}
-
static char *get_file(struct vdso_file *vdso_file)
{
char *vdso = NULL;
if (vdso_info->vdso.found)
unlink(vdso_info->vdso.temp_file_name);
+#if BITS_PER_LONG == 64
+ if (vdso_info->vdso32.found)
+ unlink(vdso_info->vdso32.temp_file_name);
+ if (vdso_info->vdsox32.found)
+ unlink(vdso_info->vdsox32.temp_file_name);
+#endif
zfree(&machine->vdso_info);
}
return dso;
}
+#if BITS_PER_LONG == 64
+
+static enum dso_type machine__thread_dso_type(struct machine *machine,
+ struct thread *thread)
+{
+ enum dso_type dso_type = DSO__TYPE_UNKNOWN;
+ struct map *map;
+ struct dso *dso;
+
+ map = map_groups__first(thread->mg, MAP__FUNCTION);
+ for (; map ; map = map_groups__next(map)) {
+ dso = map->dso;
+ if (!dso || dso->long_name[0] != '/')
+ continue;
+ dso_type = dso__type(dso, machine);
+ if (dso_type != DSO__TYPE_UNKNOWN)
+ break;
+ }
+
+ return dso_type;
+}
+
+static int vdso__do_copy_compat(FILE *f, int fd)
+{
+ char buf[4096];
+ size_t count;
+
+ while (1) {
+ count = fread(buf, 1, sizeof(buf), f);
+ if (ferror(f))
+ return -errno;
+ if (feof(f))
+ break;
+ if (count && writen(fd, buf, count) != (ssize_t)count)
+ return -errno;
+ }
+
+ return 0;
+}
+
+static int vdso__copy_compat(const char *prog, int fd)
+{
+ FILE *f;
+ int err;
+
+ f = popen(prog, "r");
+ if (!f)
+ return -errno;
+
+ err = vdso__do_copy_compat(f, fd);
+
+ if (pclose(f) == -1)
+ return -errno;
+
+ return err;
+}
+
+static int vdso__create_compat_file(const char *prog, char *temp_name)
+{
+ int fd, err;
+
+ fd = mkstemp(temp_name);
+ if (fd < 0)
+ return -errno;
+
+ err = vdso__copy_compat(prog, fd);
+
+ if (close(fd) == -1)
+ return -errno;
+
+ return err;
+}
+
+static const char *vdso__get_compat_file(struct vdso_file *vdso_file)
+{
+ int err;
+
+ if (vdso_file->found)
+ return vdso_file->temp_file_name;
+
+ if (vdso_file->error)
+ return NULL;
+
+ err = vdso__create_compat_file(vdso_file->read_prog,
+ vdso_file->temp_file_name);
+ if (err) {
+ pr_err("%s failed, error %d\n", vdso_file->read_prog, err);
+ vdso_file->error = true;
+ return NULL;
+ }
+
+ vdso_file->found = true;
+
+ return vdso_file->temp_file_name;
+}
+
+static struct dso *vdso__findnew_compat(struct machine *machine,
+ struct vdso_file *vdso_file)
+{
+ const char *file_name;
+ struct dso *dso;
+
+ dso = dsos__find(&machine->user_dsos, vdso_file->dso_name, true);
+ if (dso)
+ return dso;
+
+ file_name = vdso__get_compat_file(vdso_file);
+ if (!file_name)
+ return NULL;
+
+ return vdso__new(machine, vdso_file->dso_name, file_name);
+}
+
+static int vdso__dso_findnew_compat(struct machine *machine,
+ struct thread *thread,
+ struct vdso_info *vdso_info,
+ struct dso **dso)
+{
+ enum dso_type dso_type;
+
+ dso_type = machine__thread_dso_type(machine, thread);
+
+#ifndef HAVE_PERF_READ_VDSO32
+ if (dso_type == DSO__TYPE_32BIT)
+ return 0;
+#endif
+#ifndef HAVE_PERF_READ_VDSOX32
+ if (dso_type == DSO__TYPE_X32BIT)
+ return 0;
+#endif
+
+ switch (dso_type) {
+ case DSO__TYPE_32BIT:
+ *dso = vdso__findnew_compat(machine, &vdso_info->vdso32);
+ return 1;
+ case DSO__TYPE_X32BIT:
+ *dso = vdso__findnew_compat(machine, &vdso_info->vdsox32);
+ return 1;
+ case DSO__TYPE_UNKNOWN:
+ case DSO__TYPE_64BIT:
+ default:
+ return 0;
+ }
+}
+
+#endif
+
struct dso *vdso__dso_findnew(struct machine *machine,
struct thread *thread __maybe_unused)
{
if (!vdso_info)
return NULL;
+#if BITS_PER_LONG == 64
+ if (vdso__dso_findnew_compat(machine, thread, vdso_info, &dso))
+ return dso;
+#endif
+
dso = dsos__find(&machine->user_dsos, DSO__NAME_VDSO, true);
if (!dso) {
char *file;
bool dso__is_vdso(struct dso *dso)
{
- return !strcmp(dso->short_name, DSO__NAME_VDSO);
+ return !strcmp(dso->short_name, DSO__NAME_VDSO) ||
+ !strcmp(dso->short_name, DSO__NAME_VDSO32) ||
+ !strcmp(dso->short_name, DSO__NAME_VDSOX32);
}
#define VDSO__MAP_NAME "[vdso]"
-#define DSO__NAME_VDSO "[vdso]"
+#define DSO__NAME_VDSO "[vdso]"
+#define DSO__NAME_VDSO32 "[vdso32]"
+#define DSO__NAME_VDSOX32 "[vdsox32]"
static inline bool is_vdso_map(const char *filename)
{
--- /dev/null
+#include <stdio.h>
+#include <unistd.h>
+#include <sys/stat.h>
+#include <sys/mman.h>
+#include <zlib.h>
+
+#include "util/util.h"
+#include "util/debug.h"
+
+
+#define CHUNK_SIZE 16384
+
+int gzip_decompress_to_file(const char *input, int output_fd)
+{
+ int ret = Z_STREAM_ERROR;
+ int input_fd;
+ void *ptr;
+ int len;
+ struct stat stbuf;
+ unsigned char buf[CHUNK_SIZE];
+ z_stream zs = {
+ .zalloc = Z_NULL,
+ .zfree = Z_NULL,
+ .opaque = Z_NULL,
+ .avail_in = 0,
+ .next_in = Z_NULL,
+ };
+
+ input_fd = open(input, O_RDONLY);
+ if (input_fd < 0)
+ return -1;
+
+ if (fstat(input_fd, &stbuf) < 0)
+ goto out_close;
+
+ ptr = mmap(NULL, stbuf.st_size, PROT_READ, MAP_PRIVATE, input_fd, 0);
+ if (ptr == MAP_FAILED)
+ goto out_close;
+
+ if (inflateInit2(&zs, 16 + MAX_WBITS) != Z_OK)
+ goto out_unmap;
+
+ zs.next_in = ptr;
+ zs.avail_in = stbuf.st_size;
+
+ do {
+ zs.next_out = buf;
+ zs.avail_out = CHUNK_SIZE;
+
+ ret = inflate(&zs, Z_NO_FLUSH);
+ switch (ret) {
+ case Z_NEED_DICT:
+ ret = Z_DATA_ERROR;
+ /* fall through */
+ case Z_DATA_ERROR:
+ case Z_MEM_ERROR:
+ goto out;
+ default:
+ break;
+ }
+
+ len = CHUNK_SIZE - zs.avail_out;
+ if (writen(output_fd, buf, len) != len) {
+ ret = Z_DATA_ERROR;
+ goto out;
+ }
+
+ } while (ret != Z_STREAM_END);
+
+out:
+ inflateEnd(&zs);
+out_unmap:
+ munmap(ptr, stbuf.st_size);
+out_close:
+ close(input_fd);
+
+ return ret == Z_STREAM_END ? 0 : -1;
+}
{
struct termios local_term_attributes;
+ term_attributes_were_set = 0;
+
+ /* STDIN must be a terminal */
+
+ if (!isatty(STDIN_FILENO)) {
+ return;
+ }
+
/* Get and keep the original attributes */
if (tcgetattr(STDIN_FILENO, &original_term_attributes)) {
if (ACPI_VALIDATE_RSDP_SIG(table->signature)) {
rsdp = ACPI_CAST_PTR(struct acpi_table_rsdp, table);
- return (rsdp->length);
+ return (acpi_tb_get_rsdp_length(rsdp));
}
/* Normal ACPI table */
}
# Parameters
-DEBUGFS_DIR=`grep debugfs /proc/mounts | cut -f2 -d' '`
+DEBUGFS_DIR=`grep debugfs /proc/mounts | cut -f2 -d' ' | head -1`
TRACING_DIR=$DEBUGFS_DIR/tracing
TOP_DIR=`absdir $0`
TEST_DIR=$TOP_DIR/test.d
struct tpacket2_hdr *header = ring;
int count = 0;
- while (header->tp_status & TP_STATUS_USER && count < RING_NUM_FRAMES) {
+ while (count < RING_NUM_FRAMES && header->tp_status & TP_STATUS_USER) {
count++;
header = ring + (count * getpagesize());
}
touch $T
. $KVM/bin/functions.sh
-. $KVPATH/ver_functions.sh
+. $CONFIGFRAG/ver_functions.sh
config_template=${1}
config_dir=`echo $config_template | sed -e 's,/[^/]*$,,'`
touch $resdir/buildonly
exit 0
fi
-echo $QEMU $qemu_args -m 512 -kernel $builddir/$BOOT_IMAGE -append \"$qemu_append $boot_args\" > $resdir/qemu-cmd
-( $QEMU $qemu_args -m 512 -kernel $builddir/$BOOT_IMAGE -append "$qemu_append $boot_args"; echo $? > $resdir/qemu-retval ) &
+echo $QEMU $qemu_args -m 512 -kernel $resdir/bzImage -append \"$qemu_append $boot_args\" > $resdir/qemu-cmd
+( $QEMU $qemu_args -m 512 -kernel $resdir/bzImage -append "$qemu_append $boot_args"; echo $? > $resdir/qemu-retval ) &
qemu_pid=$!
commandcompleted=0
echo Monitoring qemu job at pid $qemu_pid
configs=""
cpus=0
ds=`date +%Y.%m.%d-%H:%M:%S`
-kversion=""
. functions.sh
echo " --duration minutes"
echo " --interactive"
echo " --kmake-arg kernel-make-arguments"
- echo " --kversion vN.NN"
echo " --mac nn:nn:nn:nn:nn:nn"
echo " --no-initrd"
echo " --qemu-args qemu-system-..."
TORTURE_KMAKE_ARG="$2"
shift
;;
- --kversion)
- checkarg --kversion "(kernel version)" $# "$2" '^v[0-9.]*$' '^error'
- kversion=$2
- shift
- ;;
--mac)
checkarg --mac "(MAC address)" $# "$2" '^\([0-9a-fA-F]\{2\}:\)\{5\}[0-9a-fA-F]\{2\}$' error
TORTURE_QEMU_MAC=$2
done
CONFIGFRAG=${KVM}/configs/${TORTURE_SUITE}; export CONFIGFRAG
-KVPATH=${CONFIGFRAG}/$kversion; export KVPATH
if test -z "$configs"
then
- configs="`cat $CONFIGFRAG/$kversion/CFLIST`"
+ configs="`cat $CONFIGFRAG/CFLIST`"
fi
if test -z "$resdir"
touch $T/cfgcpu
for CF in $configs
do
- if test -f "$CONFIGFRAG/$kversion/$CF"
+ if test -f "$CONFIGFRAG/$CF"
then
- cpu_count=`configNR_CPUS.sh $CONFIGFRAG/$kversion/$CF`
- cpu_count=`configfrag_boot_cpus "$TORTURE_BOOTARGS" "$CONFIGFRAG/$kversion/$CF" "$cpu_count"`
+ cpu_count=`configNR_CPUS.sh $CONFIGFRAG/$CF`
+ cpu_count=`configfrag_boot_cpus "$TORTURE_BOOTARGS" "$CONFIGFRAG/$CF" "$cpu_count"`
echo $CF $cpu_count >> $T/cfgcpu
else
echo "The --configs file $CF does not exist, terminating."
cat << ___EOF___ > $T/script
CONFIGFRAG="$CONFIGFRAG"; export CONFIGFRAG
KVM="$KVM"; export KVM
-KVPATH="$KVPATH"; export KVPATH
PATH="$PATH"; export PATH
TORTURE_BOOT_IMAGE="$TORTURE_BOOT_IMAGE"; export TORTURE_BOOT_IMAGE
TORTURE_BUILDONLY="$TORTURE_BUILDONLY"; export TORTURE_BUILDONLY
fi
___EOF___
awk < $T/cfgcpu.pack \
- -v CONFIGDIR="$CONFIGFRAG/$kversion/" \
+ -v CONFIGDIR="$CONFIGFRAG/" \
-v KVM="$KVM" \
-v ncpus=$cpus \
-v rd=$resdir/$ds/ \
CONFIG_NO_HZ_IDLE=n
CONFIG_NO_HZ_FULL=n
CONFIG_RCU_TRACE=y
+CONFIG_PROVE_LOCKING=y
+CONFIG_PROVE_RCU=y
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_PREEMPT_COUNT=y
--- /dev/null
+rcupdate.rcu_self_test=1
+rcupdate.rcu_self_test_bh=1
CONFIG_PREEMPT_NONE=n
CONFIG_PREEMPT_VOLUNTARY=n
CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
+#CHECK#CONFIG_PREEMPT_RCU=y
CONFIG_HZ_PERIODIC=n
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ_FULL=n
CONFIG_RCU_NOCB_CPU_ZERO=y
CONFIG_DEBUG_LOCK_ALLOC=n
CONFIG_RCU_CPU_STALL_INFO=n
-CONFIG_RCU_CPU_STALL_VERBOSE=n
CONFIG_RCU_BOOST=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_PREEMPT_NONE=n
CONFIG_PREEMPT_VOLUNTARY=n
CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
+#CHECK#CONFIG_PREEMPT_RCU=y
CONFIG_HZ_PERIODIC=n
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ_FULL=n
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=n
CONFIG_RCU_CPU_STALL_INFO=n
-CONFIG_RCU_CPU_STALL_VERBOSE=y
CONFIG_RCU_BOOST=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_PREEMPT_NONE=n
CONFIG_PREEMPT_VOLUNTARY=n
CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
+#CHECK#CONFIG_PREEMPT_RCU=y
CONFIG_HZ_PERIODIC=n
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ_FULL=n
CONFIG_DEBUG_LOCK_ALLOC=y
CONFIG_PROVE_LOCKING=n
CONFIG_RCU_CPU_STALL_INFO=n
-CONFIG_RCU_CPU_STALL_VERBOSE=y
CONFIG_RCU_BOOST=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_PREEMPT_NONE=n
CONFIG_PREEMPT_VOLUNTARY=n
CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
+#CHECK#CONFIG_PREEMPT_RCU=y
CONFIG_HZ_PERIODIC=y
CONFIG_NO_HZ_IDLE=n
CONFIG_NO_HZ_FULL=n
CONFIG_RCU_NOCB_CPU=n
CONFIG_DEBUG_LOCK_ALLOC=n
CONFIG_RCU_CPU_STALL_INFO=n
-CONFIG_RCU_CPU_STALL_VERBOSE=n
CONFIG_RCU_BOOST=y
-CONFIG_RCU_BOOST_PRIO=2
+CONFIG_RCU_KTHREAD_PRIO=2
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_RCU_NOCB_CPU=n
CONFIG_DEBUG_LOCK_ALLOC=n
CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_RCU_CPU_STALL_VERBOSE=y
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RCU=y
CONFIG_RCU_CPU_STALL_INFO=n
-CONFIG_RCU_CPU_STALL_VERBOSE=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
rcutorture.torture_type=sched
+rcupdate.rcu_self_test_sched=1
CONFIG_PROVE_LOCKING=y
CONFIG_PROVE_RCU=y
CONFIG_RCU_CPU_STALL_INFO=n
-CONFIG_RCU_CPU_STALL_VERBOSE=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
--- /dev/null
+rcupdate.rcu_self_test=1
+rcupdate.rcu_self_test_bh=1
+rcupdate.rcu_self_test_sched=1
CONFIG_RCU_NOCB_CPU=n
CONFIG_DEBUG_LOCK_ALLOC=n
CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_RCU_CPU_STALL_VERBOSE=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_PREEMPT_NONE=n
CONFIG_PREEMPT_VOLUNTARY=n
CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
+#CHECK#CONFIG_PREEMPT_RCU=y
CONFIG_HZ_PERIODIC=n
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ_FULL=n
CONFIG_RCU_NOCB_CPU=y
CONFIG_RCU_NOCB_CPU_ALL=y
CONFIG_DEBUG_LOCK_ALLOC=n
+CONFIG_PROVE_LOCKING=y
+CONFIG_PROVE_RCU=y
CONFIG_RCU_CPU_STALL_INFO=n
-CONFIG_RCU_CPU_STALL_VERBOSE=n
CONFIG_RCU_BOOST=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
CONFIG_PREEMPT_NONE=n
CONFIG_PREEMPT_VOLUNTARY=n
CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
+#CHECK#CONFIG_PREEMPT_RCU=y
CONFIG_HZ_PERIODIC=n
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ_FULL=n
CONFIG_RCU_NOCB_CPU_ALL=y
CONFIG_DEBUG_LOCK_ALLOC=n
CONFIG_RCU_CPU_STALL_INFO=n
-CONFIG_RCU_CPU_STALL_VERBOSE=n
CONFIG_RCU_BOOST=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
rcutorture.torture_type=sched
+rcupdate.rcu_self_test=1
+rcupdate.rcu_self_test_sched=1
CONFIG_PREEMPT_NONE=n
CONFIG_PREEMPT_VOLUNTARY=n
CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
+#CHECK#CONFIG_PREEMPT_RCU=y
CONFIG_HZ_PERIODIC=n
CONFIG_NO_HZ_IDLE=y
CONFIG_NO_HZ_FULL=n
CONFIG_RCU_NOCB_CPU=n
CONFIG_DEBUG_LOCK_ALLOC=n
CONFIG_RCU_CPU_STALL_INFO=n
-CONFIG_RCU_CPU_STALL_VERBOSE=n
CONFIG_RCU_BOOST=n
CONFIG_DEBUG_OBJECTS_RCU_HEAD=n
+++ /dev/null
-P1-S-T-NH-SD-SMP-HP
-P2-2-t-nh-sd-SMP-hp
-P3-3-T-nh-SD-SMP-hp
-P4-A-t-NH-sd-SMP-HP
-P5-U-T-NH-sd-SMP-hp
-N1-S-T-NH-SD-SMP-HP
-N2-2-t-nh-sd-SMP-hp
-N3-3-T-nh-SD-SMP-hp
-N4-A-t-NH-sd-SMP-HP
-N5-U-T-NH-sd-SMP-hp
-PT1-nh
-PT2-NH
-NT1-nh
-NT3-NH
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=8
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=4
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=2
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=y
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-#CHECK#CONFIG_TINY_RCU=y
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=n
-#
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-#CHECK#CONFIG_TINY_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=y
-#
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=8
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=4
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=2
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_RT_MUTEXES=y
-CONFIG_RCU_BOOST=y
-CONFIG_RCU_BOOST_PRIO=2
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=y
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_OBJECTS=y
-CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
-CONFIG_RT_MUTEXES=y
-CONFIG_RCU_BOOST=y
-CONFIG_RCU_BOOST_PRIO=2
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_TINY_PREEMPT_RCU=y
-CONFIG_RCU_BOOST=y
-CONFIG_RCU_BOOST_PRIO=2
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=n
-#
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_TINY_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=y
-#
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-#!/bin/bash
-#
-# Kernel-version-dependent shell functions for the rest of the scripts.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, you can access it online at
-# http://www.gnu.org/licenses/gpl-2.0.html.
-#
-# Copyright (C) IBM Corporation, 2013
-#
-# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
-
-# per_version_boot_params bootparam-string config-file seconds
-#
-# Adds per-version torture-module parameters to kernels supporting them.
-# Which old kernels do not.
-per_version_boot_params () {
- echo rcutorture.stat_interval=15 \
- rcutorture.shutdown_secs=$3 \
- rcutorture.rcutorture_runnable=1 \
- rcutorture.test_no_idle_hz=1 \
- rcutorture.verbose=1
-}
+++ /dev/null
-sysidleY.2013.06.19a
-sysidleN.2013.06.19a
-P1-S-T-NH-SD-SMP-HP
-P2-2-t-nh-sd-SMP-hp
-P3-3-T-nh-SD-SMP-hp
-P4-A-t-NH-sd-SMP-HP
-P5-U-T-NH-sd-SMP-hp
-P6---t-nh-SD-smp-hp
-N1-S-T-NH-SD-SMP-HP
-N2-2-t-nh-sd-SMP-hp
-N3-3-T-nh-SD-SMP-hp
-N4-A-t-NH-sd-SMP-HP
-N5-U-T-NH-sd-SMP-hp
-PT1-nh
-PT2-NH
-NT1-nh
-NT3-NH
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_FAST_NO_HZ=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=8
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=4
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=2
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=y
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_NR_CPUS=1
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=2
-CONFIG_NR_CPUS=16
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_RCU_NOCB_CPU=y
-CONFIG_RCU_NOCB_CPU_NONE=y
-CONFIG_RCU_NOCB_CPU_ZERO=n
-CONFIG_RCU_NOCB_CPU_ALL=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=14
-CONFIG_NR_CPUS=16
-CONFIG_RCU_FANOUT_EXACT=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-#CHECK#CONFIG_TINY_RCU=y
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=n
-#
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-#CHECK#CONFIG_TINY_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=y
-#
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_RCU_FAST_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=8
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=4
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=2
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_RT_MUTEXES=y
-CONFIG_RCU_BOOST=y
-CONFIG_RCU_BOOST_PRIO=2
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=y
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_OBJECTS=y
-CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
-CONFIG_RT_MUTEXES=y
-CONFIG_RCU_BOOST=y
-CONFIG_RCU_BOOST_PRIO=2
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=n
-CONFIG_SMP=n
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=2
-CONFIG_NR_CPUS=16
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_RCU_NOCB_CPU=y
-CONFIG_RCU_NOCB_CPU_NONE=n
-CONFIG_RCU_NOCB_CPU_ZERO=n
-CONFIG_RCU_NOCB_CPU_ALL=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_OBJECTS=y
-CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLUB=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=2
-CONFIG_NR_CPUS=16
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_RCU_NOCB_CPU=y
-CONFIG_RCU_NOCB_CPU_NONE=y
-CONFIG_RCU_NOCB_CPU_ZERO=n
-CONFIG_RCU_NOCB_CPU_ALL=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_OBJECTS=y
-CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLUB=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=2
-CONFIG_NR_CPUS=16
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_RCU_NOCB_CPU=y
-CONFIG_RCU_NOCB_CPU_NONE=y
-CONFIG_RCU_NOCB_CPU_ZERO=n
-CONFIG_RCU_NOCB_CPU_ALL=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_OBJECTS=y
-CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLUB=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=2
-CONFIG_NR_CPUS=16
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_RCU_NOCB_CPU=y
-CONFIG_RCU_NOCB_CPU_NONE=n
-CONFIG_RCU_NOCB_CPU_ZERO=y
-CONFIG_RCU_NOCB_CPU_ALL=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_OBJECTS=y
-CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_SLUB=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_TINY_PREEMPT_RCU=y
-CONFIG_RCU_BOOST=y
-CONFIG_RCU_BOOST_PRIO=2
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=n
-#
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_TINY_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=y
-#
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-P1-S-T-NH-SD-SMP-HP
-P2-2-t-nh-sd-SMP-hp
-P3-3-T-nh-SD-SMP-hp
-P4-A-t-NH-sd-SMP-HP
-P5-U-T-NH-sd-SMP-hp
-N1-S-T-NH-SD-SMP-HP
-N2-2-t-nh-sd-SMP-hp
-N3-3-T-nh-SD-SMP-hp
-N4-A-t-NH-sd-SMP-HP
-N5-U-T-NH-sd-SMP-hp
-PT1-nh
-PT2-NH
-NT1-nh
-NT3-NH
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_FAST_NO_HZ=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=8
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=4
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=2
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=y
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-#CHECK#CONFIG_TINY_RCU=y
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=n
-#
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-#CHECK#CONFIG_TINY_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=y
-#
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_RCU_FAST_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=8
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=4
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=2
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_RT_MUTEXES=y
-CONFIG_RCU_BOOST=y
-CONFIG_RCU_BOOST_PRIO=2
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=y
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_OBJECTS=y
-CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
-CONFIG_RT_MUTEXES=y
-CONFIG_RCU_BOOST=y
-CONFIG_RCU_BOOST_PRIO=2
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_TINY_PREEMPT_RCU=y
-CONFIG_RCU_BOOST=y
-CONFIG_RCU_BOOST_PRIO=2
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=n
-#
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_TINY_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=y
-#
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-#!/bin/bash
-#
-# Kernel-version-dependent shell functions for the rest of the scripts.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, you can access it online at
-# http://www.gnu.org/licenses/gpl-2.0.html.
-#
-# Copyright (C) IBM Corporation, 2013
-#
-# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
-
-# rcutorture_param_onoff bootparam-string config-file
-#
-# Adds onoff rcutorture module parameters to kernels having it.
-rcutorture_param_onoff () {
- if ! bootparam_hotplug_cpu "$1" && configfrag_hotplug_cpu "$2"
- then
- echo CPU-hotplug kernel, adding rcutorture onoff. 1>&2
- echo rcutorture.onoff_interval=3 rcutorture.onoff_holdoff=30
- fi
-}
-
-# per_version_boot_params bootparam-string config-file seconds
-#
-# Adds per-version torture-module parameters to kernels supporting them.
-per_version_boot_params () {
- echo $1 `rcutorture_param_onoff "$1" "$2"` \
- rcutorture.stat_interval=15 \
- rcutorture.shutdown_secs=$3 \
- rcutorture.rcutorture_runnable=1 \
- rcutorture.test_no_idle_hz=1 \
- rcutorture.verbose=1
-}
+++ /dev/null
-P1-S-T-NH-SD-SMP-HP
-P2-2-t-nh-sd-SMP-hp
-P3-3-T-nh-SD-SMP-hp
-P4-A-t-NH-sd-SMP-HP
-P5-U-T-NH-sd-SMP-hp
-N1-S-T-NH-SD-SMP-HP
-N2-2-t-nh-sd-SMP-hp
-N3-3-T-nh-SD-SMP-hp
-N4-A-t-NH-sd-SMP-HP
-N5-U-T-NH-sd-SMP-hp
-PT1-nh
-PT2-NH
-NT1-nh
-NT3-NH
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_FAST_NO_HZ=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=8
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=4
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=2
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=y
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-#CHECK#CONFIG_TREE_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-#CHECK#CONFIG_TINY_RCU=y
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=n
-#
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-#CHECK#CONFIG_TINY_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=y
-#
-CONFIG_PREEMPT_NONE=y
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=n
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_RCU_FAST_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=8
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=4
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_NO_HZ=n
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=2
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=n
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=n
-CONFIG_HOTPLUG_CPU=y
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_RT_MUTEXES=y
-CONFIG_RCU_BOOST=y
-CONFIG_RCU_BOOST_PRIO=2
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_CPU_STALL_INFO=y
-CONFIG_NO_HZ=y
-CONFIG_SMP=y
-CONFIG_RCU_FANOUT=6
-CONFIG_NR_CPUS=8
-CONFIG_RCU_FANOUT_EXACT=y
-CONFIG_HOTPLUG_CPU=n
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-#CHECK#CONFIG_TREE_PREEMPT_RCU=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_OBJECTS=y
-CONFIG_DEBUG_OBJECTS_RCU_HEAD=y
-CONFIG_RT_MUTEXES=y
-CONFIG_RCU_BOOST=y
-CONFIG_RCU_BOOST_PRIO=2
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_TINY_PREEMPT_RCU=y
-CONFIG_RCU_BOOST=y
-CONFIG_RCU_BOOST_PRIO=2
-CONFIG_RCU_TRACE=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=n
-#
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-CONFIG_TINY_PREEMPT_RCU=y
-CONFIG_RCU_TORTURE_TEST=m
-CONFIG_MODULE_UNLOAD=y
-CONFIG_SUSPEND=n
-CONFIG_HIBERNATION=n
-#
-CONFIG_SMP=n
-#
-CONFIG_HOTPLUG_CPU=n
-#
-CONFIG_NO_HZ=y
-#
-CONFIG_PREEMPT_NONE=n
-CONFIG_PREEMPT_VOLUNTARY=n
-CONFIG_PREEMPT=y
-CONFIG_PROVE_LOCKING=y
-CONFIG_PROVE_RCU=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_PRINTK_TIME=y
-
+++ /dev/null
-#!/bin/bash
-#
-# Kernel-version-dependent shell functions for the rest of the scripts.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, you can access it online at
-# http://www.gnu.org/licenses/gpl-2.0.html.
-#
-# Copyright (C) IBM Corporation, 2013
-#
-# Authors: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
-
-# rcutorture_param_n_barrier_cbs bootparam-string
-#
-# Adds n_barrier_cbs rcutorture module parameter to kernels having it.
-rcutorture_param_n_barrier_cbs () {
- if echo $1 | grep -q "rcutorture\.n_barrier_cbs"
- then
- :
- else
- echo rcutorture.n_barrier_cbs=4
- fi
-}
-
-# rcutorture_param_onoff bootparam-string config-file
-#
-# Adds onoff rcutorture module parameters to kernels having it.
-rcutorture_param_onoff () {
- if ! bootparam_hotplug_cpu "$1" && configfrag_hotplug_cpu "$2"
- then
- echo CPU-hotplug kernel, adding rcutorture onoff. 1>&2
- echo rcutorture.onoff_interval=3 rcutorture.onoff_holdoff=30
- fi
-}
-
-# per_version_boot_params bootparam-string config-file seconds
-#
-# Adds per-version torture-module parameters to kernels supporting them.
-per_version_boot_params () {
- echo $1 `rcutorture_param_onoff "$1" "$2"` \
- `rcutorture_param_n_barrier_cbs "$1"` \
- rcutorture.stat_interval=15 \
- rcutorture.shutdown_secs=$3 \
- rcutorture.rcutorture_runnable=1 \
- rcutorture.test_no_idle_hz=1 \
- rcutorture.verbose=1
-}
CONFIG_PREEMPT_RCU
CONFIG_SMP
CONFIG_TINY_RCU
-CONFIG_TREE_PREEMPT_RCU
+CONFIG_PREEMPT_RCU
CONFIG_TREE_RCU
All forced by CONFIG_TINY_RCU.
This document gives a brief rationale for the TREE_RCU-related test
-cases, a group that includes TREE_PREEMPT_RCU.
+cases, a group that includes PREEMPT_RCU.
Kconfig Parameters:
CONFIG_PREEMPT -- Do half. (First three and #8.)
CONFIG_PROVE_LOCKING -- Do all but two, covering CONFIG_PROVE_RCU and not.
CONFIG_PROVE_RCU -- Do all but one under CONFIG_PROVE_LOCKING.
-CONFIG_RCU_BOOST -- one of TREE_PREEMPT_RCU.
-CONFIG_RCU_BOOST_PRIO -- set to 2 for _BOOST testing.
-CONFIG_RCU_CPU_STALL_INFO -- do one with and without _VERBOSE.
-CONFIG_RCU_CPU_STALL_VERBOSE -- do one with and without _INFO.
+CONFIG_RCU_BOOST -- one of PREEMPT_RCU.
+CONFIG_RCU_KTHREAD_PRIO -- set to 2 for _BOOST testing.
+CONFIG_RCU_CPU_STALL_INFO -- Do one.
CONFIG_RCU_FANOUT -- Cover hierarchy as currently, but overlap with others.
CONFIG_RCU_FANOUT_EXACT -- Do one.
CONFIG_RCU_FANOUT_LEAF -- Do one non-default.
CONFIG_RCU_NOCB_CPU_NONE -- Do one.
CONFIG_RCU_NOCB_CPU_ZERO -- Do one.
CONFIG_RCU_TRACE -- Do half.
-CONFIG_SMP -- Need one !SMP for TREE_PREEMPT_RCU.
+CONFIG_SMP -- Need one !SMP for PREEMPT_RCU.
RCU-bh: Do one with PREEMPT and one with !PREEMPT.
RCU-sched: Do one with PREEMPT but not BOOST.
CONFIG_RCU_STALL_COMMON
- Implied by TREE_RCU and TREE_PREEMPT_RCU.
+ Implied by TREE_RCU and PREEMPT_RCU.
CONFIG_RCU_TORTURE_TEST
CONFIG_RCU_TORTURE_TEST_RUNNABLE
Redundant with CONFIG_NO_HZ_FULL.
-CONFIG_TREE_PREEMPT_RCU
+CONFIG_PREEMPT_RCU
CONFIG_TREE_RCU
These are controlled by CONFIG_PREEMPT.
int kvm_vgic_create(struct kvm *kvm)
{
- int i, vcpu_lock_idx = -1, ret = 0;
+ int i, vcpu_lock_idx = -1, ret;
struct kvm_vcpu *vcpu;
mutex_lock(&kvm->lock);
* vcpu->mutex. By grabbing the vcpu->mutex of all VCPUs we ensure
* that no other VCPUs are run while we create the vgic.
*/
+ ret = -EBUSY;
kvm_for_each_vcpu(i, vcpu, kvm) {
if (!mutex_trylock(&vcpu->mutex))
goto out_unlock;
}
kvm_for_each_vcpu(i, vcpu, kvm) {
- if (vcpu->arch.has_run_once) {
- ret = -EBUSY;
+ if (vcpu->arch.has_run_once)
goto out_unlock;
- }
}
+ ret = 0;
spin_lock_init(&kvm->arch.vgic.lock);
kvm->arch.vgic.in_kernel = true;
gfn_t base_gfn, unsigned long npages);
static pfn_t kvm_pin_pages(struct kvm_memory_slot *slot, gfn_t gfn,
- unsigned long size)
+ unsigned long npages)
{
gfn_t end_gfn;
pfn_t pfn;
pfn = gfn_to_pfn_memslot(slot, gfn);
- end_gfn = gfn + (size >> PAGE_SHIFT);
+ end_gfn = gfn + npages;
gfn += 1;
if (is_error_noslot_pfn(pfn))
* Pin all pages we are about to map in memory. This is
* important because we unmap and unpin in 4kb steps later.
*/
- pfn = kvm_pin_pages(slot, gfn, page_size);
+ pfn = kvm_pin_pages(slot, gfn, page_size >> PAGE_SHIFT);
if (is_error_noslot_pfn(pfn)) {
gfn += 1;
continue;
if (r) {
printk(KERN_ERR "kvm_iommu_map_address:"
"iommu failed to map pfn=%llx\n", pfn);
- kvm_unpin_pages(kvm, pfn, page_size);
+ kvm_unpin_pages(kvm, pfn, page_size >> PAGE_SHIFT);
goto unmap_pages;
}
static bool largepages_enabled = true;
-bool kvm_is_mmio_pfn(pfn_t pfn)
+bool kvm_is_reserved_pfn(pfn_t pfn)
{
if (pfn_valid(pfn))
- return !is_zero_pfn(pfn) && PageReserved(pfn_to_page(pfn));
+ return PageReserved(pfn_to_page(pfn));
return true;
}
else if ((vma->vm_flags & VM_PFNMAP)) {
pfn = ((addr - vma->vm_start) >> PAGE_SHIFT) +
vma->vm_pgoff;
- BUG_ON(!kvm_is_mmio_pfn(pfn));
+ BUG_ON(!kvm_is_reserved_pfn(pfn));
} else {
if (async && vma_is_valid(vma, write_fault))
*async = true;
if (is_error_noslot_pfn(pfn))
return KVM_ERR_PTR_BAD_PAGE;
- if (kvm_is_mmio_pfn(pfn)) {
+ if (kvm_is_reserved_pfn(pfn)) {
WARN_ON(1);
return KVM_ERR_PTR_BAD_PAGE;
}
void kvm_release_pfn_clean(pfn_t pfn)
{
- if (!is_error_noslot_pfn(pfn) && !kvm_is_mmio_pfn(pfn))
+ if (!is_error_noslot_pfn(pfn) && !kvm_is_reserved_pfn(pfn))
put_page(pfn_to_page(pfn));
}
EXPORT_SYMBOL_GPL(kvm_release_pfn_clean);
void kvm_set_pfn_dirty(pfn_t pfn)
{
- if (!kvm_is_mmio_pfn(pfn)) {
+ if (!kvm_is_reserved_pfn(pfn)) {
struct page *page = pfn_to_page(pfn);
if (!PageReserved(page))
SetPageDirty(page);
void kvm_set_pfn_accessed(pfn_t pfn)
{
- if (!kvm_is_mmio_pfn(pfn))
+ if (!kvm_is_reserved_pfn(pfn))
mark_page_accessed(pfn_to_page(pfn));
}
EXPORT_SYMBOL_GPL(kvm_set_pfn_accessed);
void kvm_get_pfn(pfn_t pfn)
{
- if (!kvm_is_mmio_pfn(pfn))
+ if (!kvm_is_reserved_pfn(pfn))
get_page(pfn_to_page(pfn));
}
EXPORT_SYMBOL_GPL(kvm_get_pfn);
return 0;
}
+void kvm_unregister_device_ops(u32 type)
+{
+ if (kvm_device_ops_table[type] != NULL)
+ kvm_device_ops_table[type] = NULL;
+}
+
static int kvm_ioctl_create_device(struct kvm *kvm,
struct kvm_create_device *cd)
{
kvm_arch_exit();
kvm_irqfd_exit();
free_cpumask_var(cpus_hardware_enabled);
+ kvm_vfio_ops_exit();
}
EXPORT_SYMBOL_GPL(kvm_exit);
{
return kvm_register_device_ops(&kvm_vfio_ops, KVM_DEV_TYPE_VFIO);
}
+
+void kvm_vfio_ops_exit(void)
+{
+ kvm_unregister_device_ops(KVM_DEV_TYPE_VFIO);
+}
#ifdef CONFIG_KVM_VFIO
int kvm_vfio_ops_init(void);
+void kvm_vfio_ops_exit(void);
#else
static inline int kvm_vfio_ops_init(void)
{
return 0;
}
+static inline void kvm_vfio_ops_exit(void)
+{
+}
#endif
#endif
projects / linux-2.6-block.git / commitdiff