arm64: dts: exynos: Enable HDMI/TV path on Exynos5433-TM2

TV path consist of following interconnected components:
- DECON_TV - display controller,
- HDMI - video signal converter RGB / HDMI,
- MHL - video signal converter HDMI / MHL,
- DDC - i2c slave device for EDID reading (on hsi2c_11 bus).

Signed-off-by: Andrzej Hajda <a.hajda@samsung.com>
Reviewed-by: Javier Martinez Canillas <javier@osg.samsung.com>
Reviewed-by: Chanwoo Choi <cw00.choi@samsung.com>
Tested-by: Hoegeun Kwon <hoegeun.kwon@samsung.com>
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
index cc6701b3bce44fd1bc2b9611a01a40837b825e8c..a5c866901e9322903023bb636c742ef29e5d6573 100644 (file)
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi
@@ -278,6 +278,22 @@
        };
 };
 
+&decon_tv {
+       status = "okay";
+
+       ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               port@0 {
+                       reg = <0>;
+                       tv_to_hdmi: endpoint {
+                               remote-endpoint = <&hdmi_to_tv>;
+                       };
+               };
+       };
+};
+
 &dsi {
        status = "okay";
        vddcore-supply = <&ldo6_reg>;
@@ -301,6 +317,33 @@
        };
 };
 
+&hdmi {
+       hpd-gpios = <&gpa3 0 GPIO_ACTIVE_HIGH>;
+       status = "okay";
+       vdd-supply = <&ldo6_reg>;
+       vdd_osc-supply = <&ldo7_reg>;
+       vdd_pll-supply = <&ldo6_reg>;
+
+       ports {
+               #address-cells = <1>;
+               #size-cells = <0>;
+
+               port@0 {
+                       reg = <0>;
+                       hdmi_to_tv: endpoint {
+                               remote-endpoint = <&tv_to_hdmi>;
+                       };
+               };
+
+               port@1 {
+                       reg = <1>;
+                       hdmi_to_mhl: endpoint {
+                               remote-endpoint = <&mhl_to_hdmi>;
+                       };
+               };
+       };
+};
+
 &hsi2c_0 {
        status = "okay";
        clock-frequency = <2500000>;
@@ -702,6 +745,28 @@
        };
 };
 
+&hsi2c_7 {
+       status = "okay";
+
+       sii8620@39 {
+               reg = <0x39>;
+               compatible = "sil,sii8620";
+               cvcc10-supply = <&ldo36_reg>;
+               iovcc18-supply = <&ldo34_reg>;
+               interrupt-parent = <&gpf0>;
+               interrupts = <2 IRQ_TYPE_LEVEL_HIGH>;
+               reset-gpios = <&gpv7 0 GPIO_ACTIVE_LOW>;
+               clocks = <&pmu_system_controller 0>;
+               clock-names = "xtal";
+
+               port {
+                       mhl_to_hdmi: endpoint {
+                               remote-endpoint = <&hdmi_to_mhl>;
+                       };
+               };
+       };
+};
+
 &hsi2c_8 {
        status = "okay";
 
@@ -745,6 +810,10 @@
        };
 };
 
+&hsi2c_11 {
+       status = "okay";
+};
+
 &i2s0 {
        status = "okay";
 };