ixgbe: fix race when setting advertised speed
authorEmil Tantilov <emil.s.tantilov@intel.com>
Tue, 28 Oct 2014 05:50:03 +0000 (05:50 +0000)
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>
Thu, 30 Oct 2014 12:12:07 +0000 (05:12 -0700)
Following commands:

modprobe ixgbe
ifconfig ethX up
ethtool -s ethX advertise 0x020

can lead to "setup link failed with code -14" error due to the setup_link
call racing with the SFP detection routine in the watchdog.

This patch resolves this issue by protecting the setup_link call with check
for __IXGBE_IN_SFP_INIT.

Reported-by: Scott Harrison <scoharr2@cisco.com>
Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c

index 3ce4a258f94534da25304c9138e0bf28fdd3c9ff..0ae038b9af90cfc7dc15bd01c0b4014e37fa1911 100644 (file)
@@ -342,12 +342,16 @@ static int ixgbe_set_settings(struct net_device *netdev,
                if (old == advertised)
                        return err;
                /* this sets the link speed and restarts auto-neg */
+               while (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state))
+                       usleep_range(1000, 2000);
+
                hw->mac.autotry_restart = true;
                err = hw->mac.ops.setup_link(hw, advertised, true);
                if (err) {
                        e_info(probe, "setup link failed with code %d\n", err);
                        hw->mac.ops.setup_link(hw, old, true);
                }
+               clear_bit(__IXGBE_IN_SFP_INIT, &adapter->state);
        } else {
                /* in this case we currently only support 10Gb/FULL */
                u32 speed = ethtool_cmd_speed(ecmd);