libata: fix using DMA buffers on stack

When CONFIG_VMAP_STACK=y, __pa() returns incorrect physical address for
a stack virtual address. Stack DMA buffers must be avoided.

Signed-off-by: raymond pang <raymondpangxd@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>

diff --git a/drivers/ata/libata-zpodd.c b/drivers/ata/libata-zpodd.c
index b3ed8f9953a862ea3ae67ef065ca5469330a44e0..173e6f2dd9af0f12afdc1fee7e372cfa4291e0aa 100644 (file)
--- a/drivers/ata/libata-zpodd.c
+++ b/drivers/ata/libata-zpodd.c
@@ -52,38 +52,52 @@ static int eject_tray(struct ata_device *dev)
 /* Per the spec, only slot type and drawer type ODD can be supported */
 static enum odd_mech_type zpodd_get_mech_type(struct ata_device *dev)
 {
-       char buf[16];
+       char *buf;
        unsigned int ret;
-       struct rm_feature_desc *desc = (void *)(buf + 8);
+       struct rm_feature_desc *desc;
        struct ata_taskfile tf;
        static const char cdb[] = {  GPCMD_GET_CONFIGURATION,
                        2,      /* only 1 feature descriptor requested */
                        0, 3,   /* 3, removable medium feature */
                        0, 0, 0,/* reserved */
-                       0, sizeof(buf),
+                       0, 16,
                        0, 0, 0,
        };
 
+       buf = kzalloc(16, GFP_KERNEL);
+       if (!buf)
+               return ODD_MECH_TYPE_UNSUPPORTED;
+       desc = (void *)(buf + 8);
+
        ata_tf_init(dev, &tf);
        tf.flags = ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
        tf.command = ATA_CMD_PACKET;
        tf.protocol = ATAPI_PROT_PIO;
-       tf.lbam = sizeof(buf);
+       tf.lbam = 16;
 
        ret = ata_exec_internal(dev, &tf, cdb, DMA_FROM_DEVICE,
-                               buf, sizeof(buf), 0);
-       if (ret)
+                               buf, 16, 0);
+       if (ret) {
+               kfree(buf);
                return ODD_MECH_TYPE_UNSUPPORTED;
+       }
 
-       if (be16_to_cpu(desc->feature_code) != 3)
+       if (be16_to_cpu(desc->feature_code) != 3) {
+               kfree(buf);
                return ODD_MECH_TYPE_UNSUPPORTED;
+       }
 
-       if (desc->mech_type == 0 && desc->load == 0 && desc->eject == 1)
+       if (desc->mech_type == 0 && desc->load == 0 && desc->eject == 1) {
+               kfree(buf);
                return ODD_MECH_TYPE_SLOT;
-       else if (desc->mech_type == 1 && desc->load == 0 && desc->eject == 1)
+       } else if (desc->mech_type == 1 && desc->load == 0 &&
+                  desc->eject == 1) {
+               kfree(buf);
                return ODD_MECH_TYPE_DRAWER;
-       else
+       } else {
+               kfree(buf);
                return ODD_MECH_TYPE_UNSUPPORTED;
+       }
 }
 
 /* Test if ODD is zero power ready by sense code */