".word (" #fault_addr " - .), (" #except_addr " - .)\n\t" \
".previous\n"
+/*
+ * ASM_EXCEPTIONTABLE_ENTRY_EFAULT() creates a special exception table entry
+ * (with lowest bit set) for which the fault handler in fixup_exception() will
+ * load -EFAULT into %r8 for a read or write fault, and zeroes the target
+ * register in case of a read fault in get_user().
+ */
+#define ASM_EXCEPTIONTABLE_ENTRY_EFAULT( fault_addr, except_addr )\
+ ASM_EXCEPTIONTABLE_ENTRY( fault_addr, except_addr + 1)
+
/*
* The page fault handler stores, in a per-cpu area, the following information
* if a fixup routine is available.
#define __get_user(x, ptr) \
({ \
register long __gu_err __asm__ ("r8") = 0; \
- register long __gu_val __asm__ ("r9") = 0; \
+ register long __gu_val; \
\
load_sr2(); \
switch (sizeof(*(ptr))) { \
})
#define __get_user_asm(ldx, ptr) \
- __asm__("\n1:\t" ldx "\t0(%%sr2,%2),%0\n\t" \
- ASM_EXCEPTIONTABLE_ENTRY(1b, fixup_get_user_skip_1)\
+ __asm__("1: " ldx " 0(%%sr2,%2),%0\n" \
+ "9:\n" \
+ ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b) \
: "=r"(__gu_val), "=r"(__gu_err) \
- : "r"(ptr), "1"(__gu_err) \
- : "r1");
+ : "r"(ptr), "1"(__gu_err));
#if !defined(CONFIG_64BIT)
#define __get_user_asm64(ptr) \
- __asm__("\n1:\tldw 0(%%sr2,%2),%0" \
- "\n2:\tldw 4(%%sr2,%2),%R0\n\t" \
- ASM_EXCEPTIONTABLE_ENTRY(1b, fixup_get_user_skip_2)\
- ASM_EXCEPTIONTABLE_ENTRY(2b, fixup_get_user_skip_1)\
+ __asm__(" copy %%r0,%R0\n" \
+ "1: ldw 0(%%sr2,%2),%0\n" \
+ "2: ldw 4(%%sr2,%2),%R0\n" \
+ "9:\n" \
+ ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b) \
+ ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b) \
: "=r"(__gu_val), "=r"(__gu_err) \
- : "r"(ptr), "1"(__gu_err) \
- : "r1");
+ : "r"(ptr), "1"(__gu_err));
#endif /* !defined(CONFIG_64BIT) */
* The "__put_user/kernel_asm()" macros tell gcc they read from memory
* instead of writing. This is because they do not write to any memory
* gcc knows about, so there are no aliasing issues. These macros must
- * also be aware that "fixup_put_user_skip_[12]" are executed in the
- * context of the fault, and any registers used there must be listed
- * as clobbers. In this case only "r1" is used by the current routines.
- * r8/r9 are already listed as err/val.
+ * also be aware that fixups are executed in the context of the fault,
+ * and any registers used there must be listed as clobbers.
+ * r8 is already listed as err.
*/
#define __put_user_asm(stx, x, ptr) \
__asm__ __volatile__ ( \
- "\n1:\t" stx "\t%2,0(%%sr2,%1)\n\t" \
- ASM_EXCEPTIONTABLE_ENTRY(1b, fixup_put_user_skip_1)\
+ "1: " stx " %2,0(%%sr2,%1)\n" \
+ "9:\n" \
+ ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b) \
: "=r"(__pu_err) \
- : "r"(ptr), "r"(x), "0"(__pu_err) \
- : "r1")
+ : "r"(ptr), "r"(x), "0"(__pu_err))
#if !defined(CONFIG_64BIT)
#define __put_user_asm64(__val, ptr) do { \
__asm__ __volatile__ ( \
- "\n1:\tstw %2,0(%%sr2,%1)" \
- "\n2:\tstw %R2,4(%%sr2,%1)\n\t" \
- ASM_EXCEPTIONTABLE_ENTRY(1b, fixup_put_user_skip_2)\
- ASM_EXCEPTIONTABLE_ENTRY(2b, fixup_put_user_skip_1)\
+ "1: stw %2,0(%%sr2,%1)\n" \
+ "2: stw %R2,4(%%sr2,%1)\n" \
+ "9:\n" \
+ ASM_EXCEPTIONTABLE_ENTRY_EFAULT(1b, 9b) \
+ ASM_EXCEPTIONTABLE_ENTRY_EFAULT(2b, 9b) \
: "=r"(__pu_err) \
- : "r"(ptr), "r"(__val), "0"(__pu_err) \
- : "r1"); \
+ : "r"(ptr), "r"(__val), "0"(__pu_err)); \
} while (0)
#endif /* !defined(CONFIG_64BIT) */
+++ /dev/null
-/*
- * Linux/PA-RISC Project (http://www.parisc-linux.org/)
- *
- * Copyright (C) 2004 Randolph Chung <tausq@debian.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- * Fixup routines for kernel exception handling.
- */
-#include <asm/asm-offsets.h>
-#include <asm/assembly.h>
-#include <asm/errno.h>
-#include <linux/linkage.h>
-
-#ifdef CONFIG_SMP
- .macro get_fault_ip t1 t2
- loadgp
- addil LT%__per_cpu_offset,%r27
- LDREG RT%__per_cpu_offset(%r1),\t1
- /* t2 = smp_processor_id() */
- mfctl 30,\t2
- ldw TI_CPU(\t2),\t2
-#ifdef CONFIG_64BIT
- extrd,u \t2,63,32,\t2
-#endif
- /* t2 = &__per_cpu_offset[smp_processor_id()]; */
- LDREGX \t2(\t1),\t2
- addil LT%exception_data,%r27
- LDREG RT%exception_data(%r1),\t1
- /* t1 = this_cpu_ptr(&exception_data) */
- add,l \t1,\t2,\t1
- /* %r27 = t1->fault_gp - restore gp */
- LDREG EXCDATA_GP(\t1), %r27
- /* t1 = t1->fault_ip */
- LDREG EXCDATA_IP(\t1), \t1
- .endm
-#else
- .macro get_fault_ip t1 t2
- loadgp
- /* t1 = this_cpu_ptr(&exception_data) */
- addil LT%exception_data,%r27
- LDREG RT%exception_data(%r1),\t2
- /* %r27 = t2->fault_gp - restore gp */
- LDREG EXCDATA_GP(\t2), %r27
- /* t1 = t2->fault_ip */
- LDREG EXCDATA_IP(\t2), \t1
- .endm
-#endif
-
- .level LEVEL
-
- .text
- .section .fixup, "ax"
-
- /* get_user() fixups, store -EFAULT in r8, and 0 in r9 */
-ENTRY_CFI(fixup_get_user_skip_1)
- get_fault_ip %r1,%r8
- ldo 4(%r1), %r1
- ldi -EFAULT, %r8
- bv %r0(%r1)
- copy %r0, %r9
-ENDPROC_CFI(fixup_get_user_skip_1)
-
-ENTRY_CFI(fixup_get_user_skip_2)
- get_fault_ip %r1,%r8
- ldo 8(%r1), %r1
- ldi -EFAULT, %r8
- bv %r0(%r1)
- copy %r0, %r9
-ENDPROC_CFI(fixup_get_user_skip_2)
-
- /* put_user() fixups, store -EFAULT in r8 */
-ENTRY_CFI(fixup_put_user_skip_1)
- get_fault_ip %r1,%r8
- ldo 4(%r1), %r1
- bv %r0(%r1)
- ldi -EFAULT, %r8
-ENDPROC_CFI(fixup_put_user_skip_1)
-
-ENTRY_CFI(fixup_put_user_skip_2)
- get_fault_ip %r1,%r8
- ldo 8(%r1), %r1
- bv %r0(%r1)
- ldi -EFAULT, %r8
-ENDPROC_CFI(fixup_put_user_skip_2)
-
projects / linux-2.6-block.git / commitdiff