/memreserve/ 0x00001000 0x000ef000; // ROM data
/memreserve/ 0x000f0000 0x004cc000; // reserved
+#include <dt-bindings/interrupt-controller/mips-gic.h>
+
/ {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mti,sead-3";
+ interrupt-parent = <&gic>;
cpus {
cpu@0 {
device_type = "memory";
reg = <0x0 0x08000000>;
};
+
+ cpu_intc: interrupt-controller {
+ compatible = "mti,cpu-interrupt-controller";
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+
+ gic: interrupt-controller@1b1c0000 {
+ compatible = "mti,gic";
+ reg = <0x1b1c0000 0x20000>;
+
+ interrupt-controller;
+ #interrupt-cells = <3>;
+
+ /*
+ * Declare the interrupt-parent even though the mti,gic
+ * binding doesn't require it, such that the kernel can
+ * figure out that cpu_intc is the root interrupt
+ * controller & should be probed first.
+ */
+ interrupt-parent = <&cpu_intc>;
+
+ timer {
+ compatible = "mti,gic-timer";
+ interrupts = <GIC_LOCAL 1 IRQ_TYPE_NONE>;
+ };
+ };
};
--- /dev/null
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#ifndef __MIPS_SEAD3_DTSHIM_H__
+#define __MIPS_SEAD3_DTSHIM_H__
+
+#include <linux/init.h>
+
+#ifdef CONFIG_MIPS_SEAD3
+
+extern void __init *sead3_dt_shim(void *fdt);
+
+#else /* !CONFIG_MIPS_SEAD3 */
+
+static inline void *sead3_dt_shim(void *fdt)
+{
+ return fdt;
+}
+
+#endif /* !CONFIG_MIPS_SEAD3 */
+
+#endif /* __MIPS_SEAD3_DTSHIM_H__ */
#include <linux/irqchip/mips-gic.h>
-/* SEAD-3 GIC address space definitions. */
-#define GIC_BASE_ADDR 0x1b1c0000
-#define GIC_ADDRSPACE_SZ (128 * 1024)
-
/* CPU interrupt offsets */
-#define CPU_INT_GIC 2
#define CPU_INT_EHCI 2
#define CPU_INT_UART0 4
#define CPU_INT_UART1 4
#
obj-y := sead3-lcd.o
obj-y += sead3-display.o
+obj-y += sead3-dtshim.o
obj-y += sead3-init.o
obj-y += sead3-int.o
obj-y += sead3-platform.o
--- /dev/null
+/*
+ * Copyright (C) 2016 Imagination Technologies
+ * Author: Paul Burton <paul.burton@imgtec.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#define pr_fmt(fmt) "sead3-dtshim: " fmt
+
+#include <linux/errno.h>
+#include <linux/libfdt.h>
+#include <linux/printk.h>
+
+#include <asm/io.h>
+
+#define SEAD_CONFIG CKSEG1ADDR(0x1b100110)
+#define SEAD_CONFIG_GIC_PRESENT BIT(1)
+
+static unsigned char fdt_buf[16 << 10] __initdata;
+
+static int remove_gic(void *fdt)
+{
+ int gic_off, cpu_off, err;
+ uint32_t cfg, cpu_phandle;
+
+ /* leave the GIC node intact if a GIC is present */
+ cfg = __raw_readl((uint32_t *)SEAD_CONFIG);
+ if (cfg & SEAD_CONFIG_GIC_PRESENT)
+ return 0;
+
+ gic_off = fdt_node_offset_by_compatible(fdt, -1, "mti,gic");
+ if (gic_off < 0) {
+ pr_err("unable to find DT GIC node: %d\n", gic_off);
+ return gic_off;
+ }
+
+ err = fdt_nop_node(fdt, gic_off);
+ if (err) {
+ pr_err("unable to nop GIC node\n");
+ return err;
+ }
+
+ cpu_off = fdt_node_offset_by_compatible(fdt, -1,
+ "mti,cpu-interrupt-controller");
+ if (cpu_off < 0) {
+ pr_err("unable to find CPU intc node: %d\n", cpu_off);
+ return cpu_off;
+ }
+
+ cpu_phandle = fdt_get_phandle(fdt, cpu_off);
+ if (!cpu_phandle) {
+ pr_err("unable to get CPU intc phandle\n");
+ return -EINVAL;
+ }
+
+ err = fdt_setprop_u32(fdt, 0, "interrupt-parent", cpu_phandle);
+ if (err) {
+ pr_err("unable to set root interrupt-parent: %d\n", err);
+ return err;
+ }
+
+ return 0;
+}
+
+void __init *sead3_dt_shim(void *fdt)
+{
+ int err;
+
+ if (fdt_check_header(fdt))
+ panic("Corrupt DT");
+
+ /* if this isn't SEAD3, leave the DT alone */
+ if (fdt_node_check_compatible(fdt, 0, "mti,sead-3"))
+ return fdt;
+
+ err = fdt_open_into(fdt, fdt_buf, sizeof(fdt_buf));
+ if (err)
+ panic("Unable to open FDT: %d", err);
+
+ err = remove_gic(fdt_buf);
+ if (err)
+ panic("Unable to patch FDT: %d", err);
+
+ err = fdt_pack(fdt_buf);
+ if (err)
+ panic("Unable to pack FDT: %d\n", err);
+
+ return fdt_buf;
+}
* Copyright (C) 2012 MIPS Technologies, Inc. All rights reserved.
*/
#include <linux/init.h>
-#include <linux/irq.h>
+#include <linux/irqchip.h>
#include <linux/irqchip/mips-gic.h>
-#include <linux/io.h>
-#include <asm/irq_cpu.h>
-#include <asm/setup.h>
-
-#include <asm/mips-boards/sead3int.h>
-
-#define SEAD_CONFIG_GIC_PRESENT_SHF 1
-#define SEAD_CONFIG_GIC_PRESENT_MSK (1 << SEAD_CONFIG_GIC_PRESENT_SHF)
-#define SEAD_CONFIG_BASE 0x1b100110
-#define SEAD_CONFIG_SIZE 4
-
-static void __iomem *sead3_config_reg;
+#include <asm/cpu-info.h>
+#include <asm/irq.h>
void __init arch_init_irq(void)
{
- if (!cpu_has_veic)
- mips_cpu_irq_init();
+ irqchip_init();
- sead3_config_reg = ioremap_nocache(SEAD_CONFIG_BASE, SEAD_CONFIG_SIZE);
- gic_present = (__raw_readl(sead3_config_reg) &
- SEAD_CONFIG_GIC_PRESENT_MSK) >>
- SEAD_CONFIG_GIC_PRESENT_SHF;
pr_info("GIC: %spresent\n", (gic_present) ? "" : "not ");
pr_info("EIC: %s\n",
(current_cpu_data.options & MIPS_CPU_VEIC) ? "on" : "off");
-
- if (gic_present)
- gic_init(GIC_BASE_ADDR, GIC_ADDRSPACE_SZ, CPU_INT_GIC,
- MIPS_GIC_IRQ_BASE);
}
#include <linux/init.h>
#include <linux/irq.h>
#include <linux/irqchip/mips-gic.h>
+#include <linux/irqdomain.h>
#include <linux/leds.h>
#include <linux/mtd/physmap.h>
+#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/serial_8250.h>
#include <linux/smsc911x.h>
static int __init sead3_platforms_device_init(void)
{
+ const char *intc_compat;
+ struct device_node *node;
+ struct irq_domain *irqd;
+
+ if (gic_present)
+ intc_compat = "mti,gic";
+ else
+ intc_compat = "mti,cpu-interrupt-controller";
+
+ node = of_find_compatible_node(NULL, NULL, intc_compat);
+ if (!node) {
+ pr_err("unable to find interrupt controller DT node\n");
+ return -ENODEV;
+ }
+
+ irqd = irq_find_host(node);
+ if (!irqd) {
+ pr_err("unable to find interrupt controller IRQ domain\n");
+ return -ENODEV;
+ }
+
if (gic_present) {
- uart8250_data[0].irq = MIPS_GIC_IRQ_BASE + GIC_INT_UART0;
- uart8250_data[1].irq = MIPS_GIC_IRQ_BASE + GIC_INT_UART1;
- ehci_resources[1].start = MIPS_GIC_IRQ_BASE + GIC_INT_EHCI;
- sead3_net_resources[1].start = MIPS_GIC_IRQ_BASE + GIC_INT_NET;
+ uart8250_data[0].irq = irq_create_mapping(irqd, GIC_INT_UART0);
+ uart8250_data[1].irq = irq_create_mapping(irqd, GIC_INT_UART1);
+ ehci_resources[1].start =
+ irq_create_mapping(irqd, GIC_INT_EHCI);
+ sead3_net_resources[1].start =
+ irq_create_mapping(irqd, GIC_INT_NET);
} else {
- uart8250_data[0].irq = MIPS_CPU_IRQ_BASE + CPU_INT_UART0;
- uart8250_data[1].irq = MIPS_CPU_IRQ_BASE + CPU_INT_UART1;
- ehci_resources[1].start = MIPS_CPU_IRQ_BASE + CPU_INT_EHCI;
- sead3_net_resources[1].start = MIPS_CPU_IRQ_BASE + CPU_INT_NET;
+ uart8250_data[0].irq = irq_create_mapping(irqd, CPU_INT_UART0);
+ uart8250_data[1].irq = irq_create_mapping(irqd, CPU_INT_UART1);
+ ehci_resources[1].start =
+ irq_create_mapping(irqd, CPU_INT_EHCI);
+ sead3_net_resources[1].start =
+ irq_create_mapping(irqd, CPU_INT_NET);
}
return platform_add_devices(sead3_platform_devices,
#include <asm/prom.h>
#include <asm/fw/fw.h>
+#include <asm/mach-sead3/sead3-dtshim.h>
#include <asm/mips-boards/generic.h>
const char *get_system_type(void)
void __init plat_mem_setup(void)
{
+ void *fdt = plat_get_fdt();
+
/* allow command line/bootloader env to override memory size in DT */
parse_memsize_param();
- /*
- * Load the builtin devicetree. This causes the chosen node to be
- * parsed resulting in our memory appearing
- */
- __dt_setup_arch(__dtb_start);
+ fdt = sead3_dt_shim(fdt);
+ __dt_setup_arch(fdt);
}
void __init device_tree_init(void)
{
- if (!initial_boot_params)
- return;
-
unflatten_and_copy_device_tree();
}
projects / linux-2.6-block.git / commitdiff