Documentation: devicetree: Fix double words in Doumentation/devicetree

This patch fix multiple words such as "the the" and "which which"
in Documentation/devicetree.

Signed-off-by: Masanari Iida <standby24x7@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

diff --git a/Documentation/devicetree/bindings/arm/msm/timer.txt b/Documentation/devicetree/bindings/arm/msm/timer.txt
index c6ef8f13dc7edd92eee2e2f64c25d9ea74ca09b0..74607b6c111763cd4e3174da9bb62817f59fe79f 100644 (file)
--- a/Documentation/devicetree/bindings/arm/msm/timer.txt
+++ b/Documentation/devicetree/bindings/arm/msm/timer.txt
@@ -8,7 +8,7 @@ Properties:
                "qcom,kpss-timer" - krait subsystem
                "qcom,scss-timer" - scorpion subsystem
 
-- interrupts : Interrupts for the the debug timer, the first general purpose
+- interrupts : Interrupts for the debug timer, the first general purpose
                timer, and optionally a second general purpose timer in that
                order.
 

diff --git a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
index 93986a5a8018d81296af01c7239945154abcfc8c..3bacc8e0931eea59cea79810d18745f6f689e03f 100644 (file)
--- a/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
+++ b/Documentation/devicetree/bindings/ata/cavium-compact-flash.txt
@@ -9,7 +9,7 @@ Properties:
 
   Compatibility with many Cavium evaluation boards.
 
-- reg: The base address of the the CF chip select banks.  Depending on
+- reg: The base address of the CF chip select banks.  Depending on
   the device configuration, there may be one or two banks.
 
 - cavium,bus-width: The width of the connection to the CF devices.  Valid

diff --git a/Documentation/devicetree/bindings/c6x/dscr.txt b/Documentation/devicetree/bindings/c6x/dscr.txt
index b0e97144cfb1c1b00ed41abd237cdcc54c0dc4c9..92672235de57a50d346ae91db0530abb7df8becd 100644 (file)
--- a/Documentation/devicetree/bindings/c6x/dscr.txt
+++ b/Documentation/devicetree/bindings/c6x/dscr.txt
@@ -12,7 +12,7 @@ configuration register for writes. These configuration register may be used to
 enable (and disable in some cases) SoC pin drivers, select peripheral clock
 sources (internal or pin), etc. In some cases, a configuration register is
 write once or the individual bits are write once. In addition to device config,
-the DSCR block may provide registers which which are used to reset peripherals,
+the DSCR block may provide registers which are used to reset peripherals,
 provide device ID information, provide ethernet MAC addresses, as well as other
 miscellaneous functions.
 

diff --git a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
index df0f48bcf75af42dea9f5aff2ee9e95c5f8b4b1e..f7e21b1c2a055e04fca6fd03e6e5b94357db71ef 100644 (file)
--- a/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
+++ b/Documentation/devicetree/bindings/dma/renesas,rcar-dmac.txt
@@ -1,6 +1,6 @@
 * Renesas R-Car DMA Controller Device Tree bindings
 
-Renesas R-Car Generation 2 SoCs have have multiple multi-channel DMA
+Renesas R-Car Generation 2 SoCs have multiple multi-channel DMA
 controller instances named DMAC capable of serving multiple clients. Channels
 can be dedicated to specific clients or shared between a large number of
 clients.

diff --git a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
index d63194a2c848396000f599b10f9e553815a53333..ada4e29733234aa0f5c0afe8cf20e2ac4b8de173 100644 (file)
--- a/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
+++ b/Documentation/devicetree/bindings/gpio/gpio-pcf857x.txt
@@ -39,7 +39,7 @@ Optional Properties:
   - lines-initial-states: Bitmask that specifies the initial state of each
   line. When a bit is set to zero, the corresponding line will be initialized to
   the input (pulled-up) state. When the  bit is set to one, the line will be
-  initialized the the low-level output state. If the property is not specified
+  initialized the low-level output state. If the property is not specified
   all lines will be initialized to the input state.
 
   The I/O expander can detect input state changes, and thus optionally act as

diff --git a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
index d9ee909d2b78ac44bf022fd85d532cf929c9f515..d71258e2d4560e5af41ebe1f010cb039113a30e9 100644 (file)
--- a/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
+++ b/Documentation/devicetree/bindings/iio/adc/xilinx-xadc.txt
@@ -59,7 +59,7 @@ Optional properties:
          Each child node represents one channel and has the following
          properties:
                Required properties:
-                       * reg: Pair of pins the the channel is connected to.
+                       * reg: Pair of pins the channel is connected to.
                                0: VP/VN
                                1: VAUXP[0]/VAUXN[0]
                                2: VAUXP[1]/VAUXN[1]

diff --git a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
index ec42935f390861810c1e7f6dd8e925220d46e6f1..5235cbc551b014eef7f1f0936f46298bae9ee3b4 100644 (file)
--- a/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
+++ b/Documentation/devicetree/bindings/mtd/fsmc-nand.txt
@@ -9,7 +9,7 @@ Required properties:
 Optional properties:
 - bank-width : Width (in bytes) of the device.  If not present, the width
   defaults to 1 byte
-- nand-skip-bbtscan: Indicates the the BBT scanning should be skipped
+- nand-skip-bbtscan: Indicates the BBT scanning should be skipped
 - timings: array of 6 bytes for NAND timings. The meanings of these bytes
   are:
   byte 0 TCLR  : CLE to RE delay in number of AHB clock cycles, only 4 bits

diff --git a/Documentation/devicetree/bindings/net/broadcom-systemport.txt b/Documentation/devicetree/bindings/net/broadcom-systemport.txt
index aa7ad622259d991fbfdbfafa303285c09527ce6e..877da34145b0e4d3d62f75065484e61bdd9c4749 100644 (file)
--- a/Documentation/devicetree/bindings/net/broadcom-systemport.txt
+++ b/Documentation/devicetree/bindings/net/broadcom-systemport.txt
@@ -3,7 +3,7 @@
 Required properties:
 - compatible: should be one of "brcm,systemport-v1.00" or "brcm,systemport"
 - reg: address and length of the register set for the device.
-- interrupts: interrupts for the device, first cell must be for the the rx
+- interrupts: interrupts for the device, first cell must be for the rx
   interrupts, and the second cell should be for the transmit queues. An
   optional third interrupt cell for Wake-on-LAN can be specified
 - local-mac-address: Ethernet MAC address (48 bits) of this adapter

diff --git a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
index 6fbf6e7ecde6370d9543a70abb17803ed971c7ed..8b70db103ca7094aff0f31de52fc8065011bb12b 100644 (file)
--- a/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
+++ b/Documentation/devicetree/bindings/power/rockchip-io-domain.txt
@@ -37,7 +37,7 @@ Required properties:
 
 
 You specify supplies using the standard regulator bindings by including
-a phandle the the relevant regulator.  All specified supplies must be able
+a phandle the relevant regulator.  All specified supplies must be able
 to report their voltage.  The IO Voltage Domain for any non-specified
 supplies will be not be touched.
 

diff --git a/Documentation/devicetree/overlay-notes.txt b/Documentation/devicetree/overlay-notes.txt
index 30ae758e3eef776b7dcbc423306d72b4acc5d312..d418a6ce9812038922e4f865faeca1ad9bf152d0 100644 (file)
--- a/Documentation/devicetree/overlay-notes.txt
+++ b/Documentation/devicetree/overlay-notes.txt
@@ -10,7 +10,7 @@ How overlays work
 -----------------
 
 A Device Tree's overlay purpose is to modify the kernel's live tree, and
-have the modification affecting the state of the the kernel in a way that
+have the modification affecting the state of the kernel in a way that
 is reflecting the changes.
 Since the kernel mainly deals with devices, any new device node that result
 in an active device should have it created while if the device node is either
@@ -80,7 +80,7 @@ result in foo+bar.dts
        };
 ---- foo+bar.dts -------------------------------------------------------------
 
-As a result of the the overlay, a new device node (bar) has been created
+As a result of the overlay, a new device node (bar) has been created
 so a bar platform device will be registered and if a matching device driver
 is loaded the device will be created as expected.