tty/serial: at91: maxburst was missing for dma transfers
authorLudovic Desroches <ludovic.desroches@atmel.com>
Thu, 16 Apr 2015 14:58:12 +0000 (16:58 +0200)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Tue, 28 Apr 2015 12:27:38 +0000 (14:27 +0200)
Maxburst was not set when doing the dma slave configuration. This value
is checked by the recently introduced xdmac. It causes an error when
doing the slave configuration and so prevents from using dma.

Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Cc: <stable@vger.kernel.org> # 3.12 and later
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drivers/tty/serial/atmel_serial.c

index d58fe4763d9e1bdacf07577e3043414e22f8ecbc..27dade29646b7c8d962494cf37daee398c774514 100644 (file)
@@ -880,6 +880,7 @@ static int atmel_prepare_tx_dma(struct uart_port *port)
        config.direction = DMA_MEM_TO_DEV;
        config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
        config.dst_addr = port->mapbase + ATMEL_US_THR;
+       config.dst_maxburst = 1;
 
        ret = dmaengine_slave_config(atmel_port->chan_tx,
                                     &config);
@@ -1059,6 +1060,7 @@ static int atmel_prepare_rx_dma(struct uart_port *port)
        config.direction = DMA_DEV_TO_MEM;
        config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
        config.src_addr = port->mapbase + ATMEL_US_RHR;
+       config.src_maxburst = 1;
 
        ret = dmaengine_slave_config(atmel_port->chan_rx,
                                     &config);