u8 rsvd[13];
};
+/* Read/Write SFF EEPROM command (indirect 0x06EE) */
+struct ice_aqc_sff_eeprom {
+ u8 lport_num;
+ u8 lport_num_valid;
+#define ICE_AQC_SFF_PORT_NUM_VALID BIT(0)
+ __le16 i2c_bus_addr;
+#define ICE_AQC_SFF_I2CBUS_7BIT_M 0x7F
+#define ICE_AQC_SFF_I2CBUS_10BIT_M 0x3FF
+#define ICE_AQC_SFF_I2CBUS_TYPE_M BIT(10)
+#define ICE_AQC_SFF_I2CBUS_TYPE_7BIT 0
+#define ICE_AQC_SFF_I2CBUS_TYPE_10BIT ICE_AQC_SFF_I2CBUS_TYPE_M
+#define ICE_AQC_SFF_SET_EEPROM_PAGE_S 11
+#define ICE_AQC_SFF_SET_EEPROM_PAGE_M (0x3 << ICE_AQC_SFF_SET_EEPROM_PAGE_S)
+#define ICE_AQC_SFF_NO_PAGE_CHANGE 0
+#define ICE_AQC_SFF_SET_23_ON_MISMATCH 1
+#define ICE_AQC_SFF_SET_22_ON_MISMATCH 2
+#define ICE_AQC_SFF_IS_WRITE BIT(15)
+ __le16 i2c_mem_addr;
+ __le16 eeprom_page;
+#define ICE_AQC_SFF_EEPROM_BANK_S 0
+#define ICE_AQC_SFF_EEPROM_BANK_M (0xFF << ICE_AQC_SFF_EEPROM_BANK_S)
+#define ICE_AQC_SFF_EEPROM_PAGE_S 8
+#define ICE_AQC_SFF_EEPROM_PAGE_M (0xFF << ICE_AQC_SFF_EEPROM_PAGE_S)
+ __le32 addr_high;
+ __le32 addr_low;
+};
+
/* NVM Read command (indirect 0x0701)
* NVM Erase commands (direct 0x0702)
* NVM Update commands (indirect 0x0703)
struct ice_aqc_get_phy_caps get_phy;
struct ice_aqc_set_phy_cfg set_phy;
struct ice_aqc_restart_an restart_an;
+ struct ice_aqc_sff_eeprom read_write_sff_param;
struct ice_aqc_set_port_id_led set_port_id_led;
struct ice_aqc_get_sw_cfg get_sw_conf;
struct ice_aqc_sw_rules sw_rules;
ice_aqc_opc_set_event_mask = 0x0613,
ice_aqc_opc_set_mac_lb = 0x0620,
ice_aqc_opc_set_port_id_led = 0x06E9,
+ ice_aqc_opc_sff_eeprom = 0x06EE,
/* NVM commands */
ice_aqc_opc_nvm_read = 0x0701,
return ice_aq_send_cmd(hw, &desc, NULL, 0, cd);
}
+/**
+ * ice_aq_sff_eeprom
+ * @hw: pointer to the HW struct
+ * @lport: bits [7:0] = logical port, bit [8] = logical port valid
+ * @bus_addr: I2C bus address of the eeprom (typically 0xA0, 0=topo default)
+ * @mem_addr: I2C offset. lower 8 bits for address, 8 upper bits zero padding.
+ * @page: QSFP page
+ * @set_page: set or ignore the page
+ * @data: pointer to data buffer to be read/written to the I2C device.
+ * @length: 1-16 for read, 1 for write.
+ * @write: 0 read, 1 for write.
+ * @cd: pointer to command details structure or NULL
+ *
+ * Read/Write SFF EEPROM (0x06EE)
+ */
+enum ice_status
+ice_aq_sff_eeprom(struct ice_hw *hw, u16 lport, u8 bus_addr,
+ u16 mem_addr, u8 page, u8 set_page, u8 *data, u8 length,
+ bool write, struct ice_sq_cd *cd)
+{
+ struct ice_aqc_sff_eeprom *cmd;
+ struct ice_aq_desc desc;
+ enum ice_status status;
+
+ if (!data || (mem_addr & 0xff00))
+ return ICE_ERR_PARAM;
+
+ ice_fill_dflt_direct_cmd_desc(&desc, ice_aqc_opc_sff_eeprom);
+ cmd = &desc.params.read_write_sff_param;
+ desc.flags = cpu_to_le16(ICE_AQ_FLAG_RD | ICE_AQ_FLAG_BUF);
+ cmd->lport_num = (u8)(lport & 0xff);
+ cmd->lport_num_valid = (u8)((lport >> 8) & 0x01);
+ cmd->i2c_bus_addr = cpu_to_le16(((bus_addr >> 1) &
+ ICE_AQC_SFF_I2CBUS_7BIT_M) |
+ ((set_page <<
+ ICE_AQC_SFF_SET_EEPROM_PAGE_S) &
+ ICE_AQC_SFF_SET_EEPROM_PAGE_M));
+ cmd->i2c_mem_addr = cpu_to_le16(mem_addr & 0xff);
+ cmd->eeprom_page = cpu_to_le16((u16)page << ICE_AQC_SFF_EEPROM_PAGE_S);
+ if (write)
+ cmd->i2c_bus_addr |= cpu_to_le16(ICE_AQC_SFF_IS_WRITE);
+
+ status = ice_aq_send_cmd(hw, &desc, data, length, cd);
+ return status;
+}
+
/**
* __ice_aq_get_set_rss_lut
* @hw: pointer to the hardware structure
return __ice_set_coalesce(netdev, ec, q_num);
}
+#define ICE_I2C_EEPROM_DEV_ADDR 0xA0
+#define ICE_I2C_EEPROM_DEV_ADDR2 0xA2
+#define ICE_MODULE_TYPE_SFP 0x03
+#define ICE_MODULE_TYPE_QSFP_PLUS 0x0D
+#define ICE_MODULE_TYPE_QSFP28 0x11
+#define ICE_MODULE_SFF_ADDR_MODE 0x04
+#define ICE_MODULE_SFF_DIAG_CAPAB 0x40
+#define ICE_MODULE_REVISION_ADDR 0x01
+#define ICE_MODULE_SFF_8472_COMP 0x5E
+#define ICE_MODULE_SFF_8472_SWAP 0x5C
+#define ICE_MODULE_QSFP_MAX_LEN 640
+
+/**
+ * ice_get_module_info - get SFF module type and revision information
+ * @netdev: network interface device structure
+ * @modinfo: module EEPROM size and layout information structure
+ */
+static int
+ice_get_module_info(struct net_device *netdev,
+ struct ethtool_modinfo *modinfo)
+{
+ struct ice_netdev_priv *np = netdev_priv(netdev);
+ struct ice_vsi *vsi = np->vsi;
+ struct ice_pf *pf = vsi->back;
+ struct ice_hw *hw = &pf->hw;
+ enum ice_status status;
+ u8 sff8472_comp = 0;
+ u8 sff8472_swap = 0;
+ u8 sff8636_rev = 0;
+ u8 value = 0;
+
+ status = ice_aq_sff_eeprom(hw, 0, ICE_I2C_EEPROM_DEV_ADDR, 0x00, 0x00,
+ 0, &value, 1, 0, NULL);
+ if (status)
+ return -EIO;
+
+ switch (value) {
+ case ICE_MODULE_TYPE_SFP:
+ status = ice_aq_sff_eeprom(hw, 0, ICE_I2C_EEPROM_DEV_ADDR,
+ ICE_MODULE_SFF_8472_COMP, 0x00, 0,
+ &sff8472_comp, 1, 0, NULL);
+ if (status)
+ return -EIO;
+ status = ice_aq_sff_eeprom(hw, 0, ICE_I2C_EEPROM_DEV_ADDR,
+ ICE_MODULE_SFF_8472_SWAP, 0x00, 0,
+ &sff8472_swap, 1, 0, NULL);
+ if (status)
+ return -EIO;
+
+ if (sff8472_swap & ICE_MODULE_SFF_ADDR_MODE) {
+ modinfo->type = ETH_MODULE_SFF_8079;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
+ } else if (sff8472_comp &&
+ (sff8472_swap & ICE_MODULE_SFF_DIAG_CAPAB)) {
+ modinfo->type = ETH_MODULE_SFF_8472;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN;
+ } else {
+ modinfo->type = ETH_MODULE_SFF_8079;
+ modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN;
+ }
+ break;
+ case ICE_MODULE_TYPE_QSFP_PLUS:
+ case ICE_MODULE_TYPE_QSFP28:
+ status = ice_aq_sff_eeprom(hw, 0, ICE_I2C_EEPROM_DEV_ADDR,
+ ICE_MODULE_REVISION_ADDR, 0x00, 0,
+ &sff8636_rev, 1, 0, NULL);
+ if (status)
+ return -EIO;
+ /* Check revision compliance */
+ if (sff8636_rev > 0x02) {
+ /* Module is SFF-8636 compliant */
+ modinfo->type = ETH_MODULE_SFF_8636;
+ modinfo->eeprom_len = ICE_MODULE_QSFP_MAX_LEN;
+ } else {
+ modinfo->type = ETH_MODULE_SFF_8436;
+ modinfo->eeprom_len = ICE_MODULE_QSFP_MAX_LEN;
+ }
+ break;
+ default:
+ netdev_warn(netdev,
+ "SFF Module Type not recognized.\n");
+ return -EINVAL;
+ }
+ return 0;
+}
+
+/**
+ * ice_get_module_eeprom - fill buffer with SFF EEPROM contents
+ * @netdev: network interface device structure
+ * @ee: EEPROM dump request structure
+ * @data: buffer to be filled with EEPROM contents
+ */
+static int
+ice_get_module_eeprom(struct net_device *netdev,
+ struct ethtool_eeprom *ee, u8 *data)
+{
+ struct ice_netdev_priv *np = netdev_priv(netdev);
+ u8 addr = ICE_I2C_EEPROM_DEV_ADDR;
+ struct ice_vsi *vsi = np->vsi;
+ struct ice_pf *pf = vsi->back;
+ struct ice_hw *hw = &pf->hw;
+ enum ice_status status;
+ bool is_sfp = false;
+ u16 offset = 0;
+ u8 value = 0;
+ u8 page = 0;
+ int i;
+
+ status = ice_aq_sff_eeprom(hw, 0, addr, offset, page, 0,
+ &value, 1, 0, NULL);
+ if (status)
+ return -EIO;
+
+ if (!ee || !ee->len || !data)
+ return -EINVAL;
+
+ if (value == ICE_MODULE_TYPE_SFP)
+ is_sfp = true;
+
+ for (i = 0; i < ee->len; i++) {
+ offset = i + ee->offset;
+
+ /* Check if we need to access the other memory page */
+ if (is_sfp) {
+ if (offset >= ETH_MODULE_SFF_8079_LEN) {
+ offset -= ETH_MODULE_SFF_8079_LEN;
+ addr = ICE_I2C_EEPROM_DEV_ADDR2;
+ }
+ } else {
+ while (offset >= ETH_MODULE_SFF_8436_LEN) {
+ /* Compute memory page number and offset. */
+ offset -= ETH_MODULE_SFF_8436_LEN / 2;
+ page++;
+ }
+ }
+
+ status = ice_aq_sff_eeprom(hw, 0, addr, offset, page, !is_sfp,
+ &value, 1, 0, NULL);
+ if (status)
+ value = 0;
+ data[i] = value;
+ }
+ return 0;
+}
+
static const struct ethtool_ops ice_ethtool_ops = {
.get_link_ksettings = ice_get_link_ksettings,
.set_link_ksettings = ice_set_link_ksettings,
.set_per_queue_coalesce = ice_set_per_q_coalesce,
.get_fecparam = ice_get_fecparam,
.set_fecparam = ice_set_fecparam,
+ .get_module_info = ice_get_module_info,
+ .get_module_eeprom = ice_get_module_eeprom,
};
static const struct ethtool_ops ice_ethtool_safe_mode_ops = {
projects / linux-2.6-block.git / commitdiff