ARM: dts: dra7: Add named interrupt property for dwc3
authorRoger Quadros <rogerq@ti.com>
Wed, 8 Jul 2015 10:42:32 +0000 (13:42 +0300)
committerTony Lindgren <tony@atomide.com>
Tue, 4 Aug 2015 08:46:36 +0000 (01:46 -0700)
Add interrupt names so that the same can be used for OTG easily.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/boot/dts/dra7.dtsi
arch/arm/boot/dts/dra74x.dtsi

index c6474dba44cf5916d801f0f7e6097163cffb3bad..8d3b9b0e730fceca79616fc7513e51ba5dba79f9 100644 (file)
                        usb1: usb@48890000 {
                                compatible = "snps,dwc3";
                                reg = <0x48890000 0x17000>;
-                               interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupt-names = "peripheral",
+                                                 "host",
+                                                 "otg";
                                phys = <&usb2_phy1>, <&usb3_phy1>;
                                phy-names = "usb2-phy", "usb3-phy";
                                tx-fifo-resize;
                        usb2: usb@488d0000 {
                                compatible = "snps,dwc3";
                                reg = <0x488d0000 0x17000>;
-                               interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupt-names = "peripheral",
+                                                 "host",
+                                                 "otg";
                                phys = <&usb2_phy2>;
                                phy-names = "usb2-phy";
                                tx-fifo-resize;
                        usb3: usb@48910000 {
                                compatible = "snps,dwc3";
                                reg = <0x48910000 0x17000>;
-                               interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupt-names = "peripheral",
+                                                 "host",
+                                                 "otg";
                                tx-fifo-resize;
                                maximum-speed = "high-speed";
                                dr_mode = "otg";
index fa995d0ca1f209a1ef71c8ace158cb4450179983..feea98e0a4b50ffb42a9a2238e7fb8fe81866bf4 100644 (file)
                        usb4: usb@48950000 {
                                compatible = "snps,dwc3";
                                reg = <0x48950000 0x17000>;
-                               interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
+                                            <GIC_SPI 346 IRQ_TYPE_LEVEL_HIGH>;
+                               interrupt-names = "peripheral",
+                                                 "host",
+                                                 "otg";
                                tx-fifo-resize;
                                maximum-speed = "high-speed";
                                dr_mode = "otg";