drm-misc-next is still based on v4.16-rc7, and was getting a bit stale.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
--- /dev/null
+Broadcom V3D GPU
+
+Only the Broadcom V3D 3.x and newer GPUs are covered by this binding.
+For V3D 2.x, see brcm,bcm-vc4.txt.
+
+Required properties:
+- compatible: Should be "brcm,7268-v3d" or "brcm,7278-v3d"
+- reg: Physical base addresses and lengths of the register areas
+- reg-names: Names for the register areas. The "hub", "bridge", and "core0"
+ register areas are always required. The "gca" register area
+ is required if the GCA cache controller is present.
+- interrupts: The interrupt numbers. The first interrupt is for the hub,
+ while the following interrupts are for the cores.
+ See bindings/interrupt-controller/interrupts.txt
+
+Optional properties:
+- clocks: The core clock the unit runs on
+
+v3d {
+ compatible = "brcm,7268-v3d";
+ reg = <0xf1204000 0x100>,
+ <0xf1200000 0x4000>,
+ <0xf1208000 0x4000>,
+ <0xf1204100 0x100>;
+ reg-names = "bridge", "hub", "core0", "gca";
+ interrupts = <0 78 4>,
+ <0 77 4>;
+};
tegra
tinydrm
tve200
+ v3d
vc4
bridge/dw-hdmi
xen-front
F: drivers/gpu/drm/omapdrm/
F: Documentation/devicetree/bindings/display/ti/
+DRM DRIVERS FOR V3D
+M: Eric Anholt <eric@anholt.net>
+S: Supported
+F: drivers/gpu/drm/v3d/
+F: include/uapi/drm/v3d_drm.h
+F: Documentation/devicetree/bindings/display/brcm,bcm-v3d.txt
+T: git git://anongit.freedesktop.org/drm/drm-misc
+
DRM DRIVERS FOR VC4
M: Eric Anholt <eric@anholt.net>
T: git git://github.com/anholt/linux
struct rb_node node;
};
-#ifdef CONFIG_SW_SYNC
-
extern const struct file_operations sw_sync_debugfs_fops;
void sync_timeline_debug_add(struct sync_timeline *obj);
void sync_file_debug_remove(struct sync_file *fence);
void sync_dump(void);
-#else
-# define sync_timeline_debug_add(obj)
-# define sync_timeline_debug_remove(obj)
-# define sync_file_debug_add(fence)
-# define sync_file_debug_remove(fence)
-# define sync_dump()
-#endif
-
#endif /* _LINUX_SYNC_H */
If in doubt, say "N".
-config DRM_DEBUG_MM_SELFTEST
- tristate "kselftests for DRM range manager (struct drm_mm)"
+config DRM_DEBUG_SELFTEST
+ tristate "kselftests for DRM"
depends on DRM
depends on DEBUG_KERNEL
select PRIME_NUMBERS
select DRM_LIB_RANDOM
+ select DRM_KMS_HELPER
default n
help
- This option provides a kernel module that can be used to test
- the DRM range manager (drm_mm) and its API. This option is not
+ This option provides kernel modules that can be used to run
+ various selftests on parts of the DRM api. This option is not
useful for distributions or general kernels, but only for kernel
developers working on DRM and associated drivers.
source "drivers/gpu/drm/imx/Kconfig"
+source "drivers/gpu/drm/v3d/Kconfig"
+
source "drivers/gpu/drm/vc4/Kconfig"
source "drivers/gpu/drm/etnaviv/Kconfig"
drm_kms_helper-$(CONFIG_DRM_DP_AUX_CHARDEV) += drm_dp_aux_dev.o
obj-$(CONFIG_DRM_KMS_HELPER) += drm_kms_helper.o
-obj-$(CONFIG_DRM_DEBUG_MM_SELFTEST) += selftests/
+obj-$(CONFIG_DRM_DEBUG_SELFTEST) += selftests/
obj-$(CONFIG_DRM) += drm.o
obj-$(CONFIG_DRM_MIPI_DSI) += drm_mipi_dsi.o
obj-$(CONFIG_DRM_I810) += i810/
obj-$(CONFIG_DRM_I915) += i915/
obj-$(CONFIG_DRM_MGAG200) += mgag200/
+obj-$(CONFIG_DRM_V3D) += v3d/
obj-$(CONFIG_DRM_VC4) += vc4/
obj-$(CONFIG_DRM_CIRRUS_QEMU) += cirrus/
obj-$(CONFIG_DRM_SIS) += sis/
config DRM_I2C_ADV7511
- tristate "AV7511 encoder"
+ tristate "ADV7511 encoder"
depends on OF
select DRM_KMS_HELPER
select REGMAP_I2C
}
if (adv7511->gpio_pd) {
- mdelay(5);
+ usleep_range(5000, 6000);
gpiod_set_value_cansleep(adv7511->gpio_pd, 0);
}
{
struct drm_plane *plane = plane_state->plane;
struct drm_crtc_state *crtc_state;
-
+ /* Nothing to do for same crtc*/
+ if (plane_state->crtc == crtc)
+ return 0;
if (plane_state->crtc) {
crtc_state = drm_atomic_get_crtc_state(plane_state->state,
plane_state->crtc);
if (crtc_state->enable)
drm_mode_get_hv_timing(&crtc_state->mode, &clip.x2, &clip.y2);
- plane_state->visible = drm_rect_clip_scaled(src, dst, &clip, hscale, vscale);
+ plane_state->visible = drm_rect_clip_scaled(src, dst, &clip);
drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16, rotation);
goto nomem;
for (i = 0; i < num_modes; i++)
- drm_property_add_enum(dev->mode_config.tv_mode_property, i,
+ drm_property_add_enum(dev->mode_config.tv_mode_property,
i, modes[i]);
dev->mode_config.tv_brightness_property =
{
struct drm_device *dev = connector->dev;
struct drm_property *scaling_mode_property;
- int i, j = 0;
+ int i;
const unsigned valid_scaling_mode_mask =
(1U << ARRAY_SIZE(drm_scaling_mode_enum_list)) - 1;
if (!(BIT(i) & scaling_mode_mask))
continue;
- ret = drm_property_add_enum(scaling_mode_property, j++,
+ ret = drm_property_add_enum(scaling_mode_property,
drm_scaling_mode_enum_list[i].type,
drm_scaling_mode_enum_list[i].name);
return connector->encoder;
}
-static bool drm_mode_expose_to_userspace(const struct drm_display_mode *mode,
- const struct drm_file *file_priv)
+static bool
+drm_mode_expose_to_userspace(const struct drm_display_mode *mode,
+ const struct list_head *export_list,
+ const struct drm_file *file_priv)
{
/*
* If user-space hasn't configured the driver to expose the stereo 3D
*/
if (!file_priv->stereo_allowed && drm_mode_is_stereo(mode))
return false;
+ /*
+ * If user-space hasn't configured the driver to expose the modes
+ * with aspect-ratio, don't expose them. However if such a mode
+ * is unique, let it be exposed, but reset the aspect-ratio flags
+ * while preparing the list of user-modes.
+ */
+ if (!file_priv->aspect_ratio_allowed) {
+ struct drm_display_mode *mode_itr;
+
+ list_for_each_entry(mode_itr, export_list, export_head)
+ if (drm_mode_match(mode_itr, mode,
+ DRM_MODE_MATCH_TIMINGS |
+ DRM_MODE_MATCH_CLOCK |
+ DRM_MODE_MATCH_FLAGS |
+ DRM_MODE_MATCH_3D_FLAGS))
+ return false;
+ }
return true;
}
struct drm_mode_modeinfo u_mode;
struct drm_mode_modeinfo __user *mode_ptr;
uint32_t __user *encoder_ptr;
+ LIST_HEAD(export_list);
if (!drm_core_check_feature(dev, DRIVER_MODESET))
return -EINVAL;
/* delayed so we get modes regardless of pre-fill_modes state */
list_for_each_entry(mode, &connector->modes, head)
- if (drm_mode_expose_to_userspace(mode, file_priv))
+ if (drm_mode_expose_to_userspace(mode, &export_list,
+ file_priv)) {
+ list_add_tail(&mode->export_head, &export_list);
mode_count++;
+ }
/*
* This ioctl is called twice, once to determine how much space is
* needed, and the 2nd time to fill it.
+ * The modes that need to be exposed to the user are maintained in the
+ * 'export_list'. When the ioctl is called first time to determine the,
+ * space, the export_list gets filled, to find the no.of modes. In the
+ * 2nd time, the user modes are filled, one by one from the export_list.
*/
if ((out_resp->count_modes >= mode_count) && mode_count) {
copied = 0;
mode_ptr = (struct drm_mode_modeinfo __user *)(unsigned long)out_resp->modes_ptr;
- list_for_each_entry(mode, &connector->modes, head) {
- if (!drm_mode_expose_to_userspace(mode, file_priv))
- continue;
-
+ list_for_each_entry(mode, &export_list, export_head) {
drm_mode_convert_to_umode(&u_mode, mode);
+ /*
+ * Reset aspect ratio flags of user-mode, if modes with
+ * aspect-ratio are not supported.
+ */
+ if (!file_priv->aspect_ratio_allowed)
+ u_mode.flags &= ~DRM_MODE_FLAG_PIC_AR_MASK;
if (copy_to_user(mode_ptr + copied,
&u_mode, sizeof(u_mode))) {
ret = -EFAULT;
crtc_resp->mode_valid = 0;
}
}
+ if (!file_priv->aspect_ratio_allowed)
+ crtc_resp->mode.flags &= ~DRM_MODE_FLAG_PIC_AR_MASK;
drm_modeset_unlock(&crtc->mutex);
return 0;
ret = -ENOMEM;
goto out;
}
+ if (!file_priv->aspect_ratio_allowed &&
+ (crtc_req->mode.flags & DRM_MODE_FLAG_PIC_AR_MASK) != DRM_MODE_FLAG_PIC_AR_NONE) {
+ DRM_DEBUG_KMS("Unexpected aspect-ratio flag bits\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
ret = drm_mode_convert_umode(dev, mode, &crtc_req->mode);
if (ret) {
EXPORT_SYMBOL(drm_dp_get_adjust_request_pre_emphasis);
void drm_dp_link_train_clock_recovery_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) {
- if (dpcd[DP_TRAINING_AUX_RD_INTERVAL] == 0)
+ int rd_interval = dpcd[DP_TRAINING_AUX_RD_INTERVAL] &
+ DP_TRAINING_AUX_RD_MASK;
+
+ if (rd_interval > 4)
+ DRM_DEBUG_KMS("AUX interval %d, out of range (max 4)\n",
+ rd_interval);
+
+ if (rd_interval == 0 || dpcd[DP_DPCD_REV] >= DP_DPCD_REV_14)
udelay(100);
else
- mdelay(dpcd[DP_TRAINING_AUX_RD_INTERVAL] * 4);
+ mdelay(rd_interval * 4);
}
EXPORT_SYMBOL(drm_dp_link_train_clock_recovery_delay);
void drm_dp_link_train_channel_eq_delay(const u8 dpcd[DP_RECEIVER_CAP_SIZE]) {
- if (dpcd[DP_TRAINING_AUX_RD_INTERVAL] == 0)
+ int rd_interval = dpcd[DP_TRAINING_AUX_RD_INTERVAL] &
+ DP_TRAINING_AUX_RD_MASK;
+
+ if (rd_interval > 4)
+ DRM_DEBUG_KMS("AUX interval %d, out of range (max 4)\n",
+ rd_interval);
+
+ if (rd_interval == 0)
udelay(400);
else
- mdelay(dpcd[DP_TRAINING_AUX_RD_INTERVAL] * 4);
+ mdelay(rd_interval * 4);
}
EXPORT_SYMBOL(drm_dp_link_train_channel_eq_delay);
return &dev->primary;
case DRM_MINOR_RENDER:
return &dev->render;
- case DRM_MINOR_CONTROL:
- return &dev->control;
default:
BUG();
}
err_minors:
drm_minor_free(dev, DRM_MINOR_PRIMARY);
drm_minor_free(dev, DRM_MINOR_RENDER);
- drm_minor_free(dev, DRM_MINOR_CONTROL);
drm_fs_inode_free(dev->anon_inode);
err_free:
mutex_destroy(&dev->master_mutex);
drm_minor_free(dev, DRM_MINOR_PRIMARY);
drm_minor_free(dev, DRM_MINOR_RENDER);
- drm_minor_free(dev, DRM_MINOR_CONTROL);
mutex_destroy(&dev->master_mutex);
mutex_destroy(&dev->ctxlist_mutex);
mutex_lock(&drm_global_mutex);
- ret = drm_minor_register(dev, DRM_MINOR_CONTROL);
- if (ret)
- goto err_minors;
-
ret = drm_minor_register(dev, DRM_MINOR_RENDER);
if (ret)
goto err_minors;
remove_compat_control_link(dev);
drm_minor_unregister(dev, DRM_MINOR_PRIMARY);
drm_minor_unregister(dev, DRM_MINOR_RENDER);
- drm_minor_unregister(dev, DRM_MINOR_CONTROL);
out_unlock:
mutex_unlock(&drm_global_mutex);
return ret;
remove_compat_control_link(dev);
drm_minor_unregister(dev, DRM_MINOR_PRIMARY);
drm_minor_unregister(dev, DRM_MINOR_RENDER);
- drm_minor_unregister(dev, DRM_MINOR_CONTROL);
}
EXPORT_SYMBOL(drm_dev_unregister);
static u8 drm_match_cea_mode_clock_tolerance(const struct drm_display_mode *to_match,
unsigned int clock_tolerance)
{
+ unsigned int match_flags = DRM_MODE_MATCH_TIMINGS | DRM_MODE_MATCH_FLAGS;
u8 vic;
if (!to_match->clock)
return 0;
+ if (to_match->picture_aspect_ratio)
+ match_flags |= DRM_MODE_MATCH_ASPECT_RATIO;
+
for (vic = 1; vic < ARRAY_SIZE(edid_cea_modes); vic++) {
struct drm_display_mode cea_mode = edid_cea_modes[vic];
unsigned int clock1, clock2;
continue;
do {
- if (drm_mode_equal_no_clocks_no_stereo(to_match, &cea_mode))
+ if (drm_mode_match(to_match, &cea_mode, match_flags))
return vic;
} while (cea_mode_alternate_timings(vic, &cea_mode));
}
*/
u8 drm_match_cea_mode(const struct drm_display_mode *to_match)
{
+ unsigned int match_flags = DRM_MODE_MATCH_TIMINGS | DRM_MODE_MATCH_FLAGS;
u8 vic;
if (!to_match->clock)
return 0;
+ if (to_match->picture_aspect_ratio)
+ match_flags |= DRM_MODE_MATCH_ASPECT_RATIO;
+
for (vic = 1; vic < ARRAY_SIZE(edid_cea_modes); vic++) {
struct drm_display_mode cea_mode = edid_cea_modes[vic];
unsigned int clock1, clock2;
continue;
do {
- if (drm_mode_equal_no_clocks_no_stereo(to_match, &cea_mode))
+ if (drm_mode_match(to_match, &cea_mode, match_flags))
return vic;
} while (cea_mode_alternate_timings(vic, &cea_mode));
}
static u8 drm_match_hdmi_mode_clock_tolerance(const struct drm_display_mode *to_match,
unsigned int clock_tolerance)
{
+ unsigned int match_flags = DRM_MODE_MATCH_TIMINGS | DRM_MODE_MATCH_FLAGS;
u8 vic;
if (!to_match->clock)
abs(to_match->clock - clock2) > clock_tolerance)
continue;
- if (drm_mode_equal_no_clocks(to_match, hdmi_mode))
+ if (drm_mode_match(to_match, hdmi_mode, match_flags))
return vic;
}
*/
static u8 drm_match_hdmi_mode(const struct drm_display_mode *to_match)
{
+ unsigned int match_flags = DRM_MODE_MATCH_TIMINGS | DRM_MODE_MATCH_FLAGS;
u8 vic;
if (!to_match->clock)
if ((KHZ2PICOS(to_match->clock) == KHZ2PICOS(clock1) ||
KHZ2PICOS(to_match->clock) == KHZ2PICOS(clock2)) &&
- drm_mode_equal_no_clocks_no_stereo(to_match, hdmi_mode))
+ drm_mode_match(to_match, hdmi_mode, match_flags))
return vic;
}
return 0;
const struct drm_display_mode *mode,
bool is_hdmi2_sink)
{
+ enum hdmi_picture_aspect picture_aspect;
int err;
if (!frame || !mode)
* Populate picture aspect ratio from either
* user input (if specified) or from the CEA mode list.
*/
- if (mode->picture_aspect_ratio == HDMI_PICTURE_ASPECT_4_3 ||
- mode->picture_aspect_ratio == HDMI_PICTURE_ASPECT_16_9)
- frame->picture_aspect = mode->picture_aspect_ratio;
- else if (frame->video_code > 0)
- frame->picture_aspect = drm_get_cea_aspect_ratio(
- frame->video_code);
+ picture_aspect = mode->picture_aspect_ratio;
+ if (picture_aspect == HDMI_PICTURE_ASPECT_NONE)
+ picture_aspect = drm_get_cea_aspect_ratio(frame->video_code);
+
+ /*
+ * The infoframe can't convey anything but none, 4:3
+ * and 16:9, so if the user has asked for anything else
+ * we can only satisfy it by specifying the right VIC.
+ */
+ if (picture_aspect > HDMI_PICTURE_ASPECT_16_9) {
+ if (picture_aspect !=
+ drm_get_cea_aspect_ratio(frame->video_code))
+ return -EINVAL;
+ picture_aspect = HDMI_PICTURE_ASPECT_NONE;
+ }
+ frame->picture_aspect = picture_aspect;
frame->active_aspect = HDMI_ACTIVE_ASPECT_PICTURE;
frame->scan_mode = HDMI_SCAN_MODE_UNDERSCAN;
for (j = 0; j < i; j++) {
if (!enabled[j])
continue;
- if (!drm_mode_equal(modes[j], modes[i]))
+ if (!drm_mode_match(modes[j], modes[i],
+ DRM_MODE_MATCH_TIMINGS |
+ DRM_MODE_MATCH_CLOCK |
+ DRM_MODE_MATCH_FLAGS |
+ DRM_MODE_MATCH_3D_FLAGS))
can_clone = false;
}
}
fb_helper_conn = fb_helper->connector_info[i];
list_for_each_entry(mode, &fb_helper_conn->connector->modes, head) {
- if (drm_mode_equal(mode, dmt_mode))
+ if (drm_mode_match(mode, dmt_mode,
+ DRM_MODE_MATCH_TIMINGS |
+ DRM_MODE_MATCH_CLOCK |
+ DRM_MODE_MATCH_FLAGS |
+ DRM_MODE_MATCH_3D_FLAGS))
modes[i] = mode;
}
if (!modes[i])
* backwards-compatibility reasons, we cannot make GET_FB() privileged,
* so just return an invalid handle for non-masters.
*/
- if (!drm_is_current_master(file_priv) && !capable(CAP_SYS_ADMIN) &&
- !drm_is_control_client(file_priv)) {
+ if (!drm_is_current_master(file_priv) && !capable(CAP_SYS_ADMIN)) {
r->handle = 0;
ret = 0;
goto out;
.desc = compat_ptr(v32.desc),
};
err = drm_ioctl_kernel(file, drm_version, &v,
- DRM_UNLOCKED|DRM_RENDER_ALLOW|DRM_CONTROL_ALLOW);
+ DRM_UNLOCKED|DRM_RENDER_ALLOW);
if (err)
return err;
return -EFAULT;
err = drm_ioctl_kernel(file, drm_mode_addfb2, &req64,
- DRM_CONTROL_ALLOW|DRM_UNLOCKED);
+ DRM_UNLOCKED);
if (err)
return err;
return -EINVAL;
file_priv->atomic = req->value;
file_priv->universal_planes = req->value;
+ /*
+ * No atomic user-space blows up on aspect ratio mode bits.
+ */
+ file_priv->aspect_ratio_allowed = req->value;
+ break;
+ case DRM_CLIENT_CAP_ASPECT_RATIO:
+ if (req->value > 1)
+ return -EINVAL;
+ file_priv->aspect_ratio_allowed = req->value;
break;
default:
return -EINVAL;
/* MASTER is only for master or control clients */
if (unlikely((flags & DRM_MASTER) &&
- !drm_is_current_master(file_priv) &&
- !drm_is_control_client(file_priv)))
- return -EACCES;
-
- /* Control clients must be explicitly allowed */
- if (unlikely(!(flags & DRM_CONTROL_ALLOW) &&
- drm_is_control_client(file_priv)))
+ !drm_is_current_master(file_priv)))
return -EACCES;
/* Render clients must be explicitly allowed */
/* Ioctl table */
static const struct drm_ioctl_desc drm_ioctls[] = {
DRM_IOCTL_DEF(DRM_IOCTL_VERSION, drm_version,
- DRM_UNLOCKED|DRM_RENDER_ALLOW|DRM_CONTROL_ALLOW),
+ DRM_UNLOCKED|DRM_RENDER_ALLOW),
DRM_IOCTL_DEF(DRM_IOCTL_GET_UNIQUE, drm_getunique, DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_IOCTL_GET_MAGIC, drm_getmagic, DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_IOCTL_IRQ_BUSID, drm_irq_by_busid, DRM_MASTER|DRM_ROOT_ONLY),
DRM_IOCTL_DEF(DRM_IOCTL_GEM_FLINK, drm_gem_flink_ioctl, DRM_AUTH|DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_IOCTL_GEM_OPEN, drm_gem_open_ioctl, DRM_AUTH|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETRESOURCES, drm_mode_getresources, DRM_CONTROL_ALLOW|DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETRESOURCES, drm_mode_getresources, DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_IOCTL_PRIME_HANDLE_TO_FD, drm_prime_handle_to_fd_ioctl, DRM_AUTH|DRM_UNLOCKED|DRM_RENDER_ALLOW),
DRM_IOCTL_DEF(DRM_IOCTL_PRIME_FD_TO_HANDLE, drm_prime_fd_to_handle_ioctl, DRM_AUTH|DRM_UNLOCKED|DRM_RENDER_ALLOW),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETPLANERESOURCES, drm_mode_getplane_res, DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETCRTC, drm_mode_getcrtc, DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_SETCRTC, drm_mode_setcrtc, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETPLANE, drm_mode_getplane, DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_SETPLANE, drm_mode_setplane, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_CURSOR, drm_mode_cursor_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETPLANERESOURCES, drm_mode_getplane_res, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETCRTC, drm_mode_getcrtc, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_SETCRTC, drm_mode_setcrtc, DRM_MASTER|DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETPLANE, drm_mode_getplane, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_SETPLANE, drm_mode_setplane, DRM_MASTER|DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_CURSOR, drm_mode_cursor_ioctl, DRM_MASTER|DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETGAMMA, drm_mode_gamma_get_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_IOCTL_MODE_SETGAMMA, drm_mode_gamma_set_ioctl, DRM_MASTER|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETENCODER, drm_mode_getencoder, DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETCONNECTOR, drm_mode_getconnector, DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_ATTACHMODE, drm_noop, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_DETACHMODE, drm_noop, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETPROPERTY, drm_mode_getproperty_ioctl, DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_SETPROPERTY, drm_mode_connector_property_set_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETPROPBLOB, drm_mode_getblob_ioctl, DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETFB, drm_mode_getfb, DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_ADDFB, drm_mode_addfb, DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_ADDFB2, drm_mode_addfb2, DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_RMFB, drm_mode_rmfb, DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_PAGE_FLIP, drm_mode_page_flip_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_DIRTYFB, drm_mode_dirtyfb_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_CREATE_DUMB, drm_mode_create_dumb_ioctl, DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_MAP_DUMB, drm_mode_mmap_dumb_ioctl, DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_DESTROY_DUMB, drm_mode_destroy_dumb_ioctl, DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_OBJ_GETPROPERTIES, drm_mode_obj_get_properties_ioctl, DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_OBJ_SETPROPERTY, drm_mode_obj_set_property_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_CURSOR2, drm_mode_cursor2_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_ATOMIC, drm_mode_atomic_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_CREATEPROPBLOB, drm_mode_createblob_ioctl, DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_DESTROYPROPBLOB, drm_mode_destroyblob_ioctl, DRM_CONTROL_ALLOW|DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETENCODER, drm_mode_getencoder, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETCONNECTOR, drm_mode_getconnector, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_ATTACHMODE, drm_noop, DRM_MASTER|DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_DETACHMODE, drm_noop, DRM_MASTER|DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETPROPERTY, drm_mode_getproperty_ioctl, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_SETPROPERTY, drm_mode_connector_property_set_ioctl, DRM_MASTER|DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETPROPBLOB, drm_mode_getblob_ioctl, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_GETFB, drm_mode_getfb, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_ADDFB, drm_mode_addfb, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_ADDFB2, drm_mode_addfb2, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_RMFB, drm_mode_rmfb, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_PAGE_FLIP, drm_mode_page_flip_ioctl, DRM_MASTER|DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_DIRTYFB, drm_mode_dirtyfb_ioctl, DRM_MASTER|DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_CREATE_DUMB, drm_mode_create_dumb_ioctl, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_MAP_DUMB, drm_mode_mmap_dumb_ioctl, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_DESTROY_DUMB, drm_mode_destroy_dumb_ioctl, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_OBJ_GETPROPERTIES, drm_mode_obj_get_properties_ioctl, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_OBJ_SETPROPERTY, drm_mode_obj_set_property_ioctl, DRM_MASTER|DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_CURSOR2, drm_mode_cursor2_ioctl, DRM_MASTER|DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_ATOMIC, drm_mode_atomic_ioctl, DRM_MASTER|DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_CREATEPROPBLOB, drm_mode_createblob_ioctl, DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_DESTROYPROPBLOB, drm_mode_destroyblob_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_IOCTL_SYNCOBJ_CREATE, drm_syncobj_create_ioctl,
DRM_UNLOCKED|DRM_RENDER_ALLOW),
DRM_UNLOCKED|DRM_RENDER_ALLOW),
DRM_IOCTL_DEF(DRM_IOCTL_CRTC_GET_SEQUENCE, drm_crtc_get_sequence_ioctl, DRM_UNLOCKED),
DRM_IOCTL_DEF(DRM_IOCTL_CRTC_QUEUE_SEQUENCE, drm_crtc_queue_sequence_ioctl, DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_CREATE_LEASE, drm_mode_create_lease_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_LIST_LESSEES, drm_mode_list_lessees_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_GET_LEASE, drm_mode_get_lease_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
- DRM_IOCTL_DEF(DRM_IOCTL_MODE_REVOKE_LEASE, drm_mode_revoke_lease_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW|DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_CREATE_LEASE, drm_mode_create_lease_ioctl, DRM_MASTER|DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_LIST_LESSEES, drm_mode_list_lessees_ioctl, DRM_MASTER|DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_GET_LEASE, drm_mode_get_lease_ioctl, DRM_MASTER|DRM_UNLOCKED),
+ DRM_IOCTL_DEF(DRM_IOCTL_MODE_REVOKE_LEASE, drm_mode_revoke_lease_ioctl, DRM_MASTER|DRM_UNLOCKED),
};
#define DRM_CORE_IOCTL_COUNT ARRAY_SIZE( drm_ioctls )
}
EXPORT_SYMBOL(drm_mode_duplicate);
+static bool drm_mode_match_timings(const struct drm_display_mode *mode1,
+ const struct drm_display_mode *mode2)
+{
+ return mode1->hdisplay == mode2->hdisplay &&
+ mode1->hsync_start == mode2->hsync_start &&
+ mode1->hsync_end == mode2->hsync_end &&
+ mode1->htotal == mode2->htotal &&
+ mode1->hskew == mode2->hskew &&
+ mode1->vdisplay == mode2->vdisplay &&
+ mode1->vsync_start == mode2->vsync_start &&
+ mode1->vsync_end == mode2->vsync_end &&
+ mode1->vtotal == mode2->vtotal &&
+ mode1->vscan == mode2->vscan;
+}
+
+static bool drm_mode_match_clock(const struct drm_display_mode *mode1,
+ const struct drm_display_mode *mode2)
+{
+ /*
+ * do clock check convert to PICOS
+ * so fb modes get matched the same
+ */
+ if (mode1->clock && mode2->clock)
+ return KHZ2PICOS(mode1->clock) == KHZ2PICOS(mode2->clock);
+ else
+ return mode1->clock == mode2->clock;
+}
+
+static bool drm_mode_match_flags(const struct drm_display_mode *mode1,
+ const struct drm_display_mode *mode2)
+{
+ return (mode1->flags & ~DRM_MODE_FLAG_3D_MASK) ==
+ (mode2->flags & ~DRM_MODE_FLAG_3D_MASK);
+}
+
+static bool drm_mode_match_3d_flags(const struct drm_display_mode *mode1,
+ const struct drm_display_mode *mode2)
+{
+ return (mode1->flags & DRM_MODE_FLAG_3D_MASK) ==
+ (mode2->flags & DRM_MODE_FLAG_3D_MASK);
+}
+
+static bool drm_mode_match_aspect_ratio(const struct drm_display_mode *mode1,
+ const struct drm_display_mode *mode2)
+{
+ return mode1->picture_aspect_ratio == mode2->picture_aspect_ratio;
+}
+
/**
- * drm_mode_equal - test modes for equality
+ * drm_mode_match - test modes for (partial) equality
* @mode1: first mode
* @mode2: second mode
+ * @match_flags: which parts need to match (DRM_MODE_MATCH_*)
*
* Check to see if @mode1 and @mode2 are equivalent.
*
* Returns:
- * True if the modes are equal, false otherwise.
+ * True if the modes are (partially) equal, false otherwise.
*/
-bool drm_mode_equal(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2)
+bool drm_mode_match(const struct drm_display_mode *mode1,
+ const struct drm_display_mode *mode2,
+ unsigned int match_flags)
{
if (!mode1 && !mode2)
return true;
if (!mode1 || !mode2)
return false;
- /* do clock check convert to PICOS so fb modes get matched
- * the same */
- if (mode1->clock && mode2->clock) {
- if (KHZ2PICOS(mode1->clock) != KHZ2PICOS(mode2->clock))
- return false;
- } else if (mode1->clock != mode2->clock)
+ if (match_flags & DRM_MODE_MATCH_TIMINGS &&
+ !drm_mode_match_timings(mode1, mode2))
+ return false;
+
+ if (match_flags & DRM_MODE_MATCH_CLOCK &&
+ !drm_mode_match_clock(mode1, mode2))
+ return false;
+
+ if (match_flags & DRM_MODE_MATCH_FLAGS &&
+ !drm_mode_match_flags(mode1, mode2))
+ return false;
+
+ if (match_flags & DRM_MODE_MATCH_3D_FLAGS &&
+ !drm_mode_match_3d_flags(mode1, mode2))
return false;
- return drm_mode_equal_no_clocks(mode1, mode2);
+ if (match_flags & DRM_MODE_MATCH_ASPECT_RATIO &&
+ !drm_mode_match_aspect_ratio(mode1, mode2))
+ return false;
+
+ return true;
+}
+EXPORT_SYMBOL(drm_mode_match);
+
+/**
+ * drm_mode_equal - test modes for equality
+ * @mode1: first mode
+ * @mode2: second mode
+ *
+ * Check to see if @mode1 and @mode2 are equivalent.
+ *
+ * Returns:
+ * True if the modes are equal, false otherwise.
+ */
+bool drm_mode_equal(const struct drm_display_mode *mode1,
+ const struct drm_display_mode *mode2)
+{
+ return drm_mode_match(mode1, mode2,
+ DRM_MODE_MATCH_TIMINGS |
+ DRM_MODE_MATCH_CLOCK |
+ DRM_MODE_MATCH_FLAGS |
+ DRM_MODE_MATCH_3D_FLAGS|
+ DRM_MODE_MATCH_ASPECT_RATIO);
}
EXPORT_SYMBOL(drm_mode_equal);
* Returns:
* True if the modes are equal, false otherwise.
*/
-bool drm_mode_equal_no_clocks(const struct drm_display_mode *mode1, const struct drm_display_mode *mode2)
+bool drm_mode_equal_no_clocks(const struct drm_display_mode *mode1,
+ const struct drm_display_mode *mode2)
{
- if ((mode1->flags & DRM_MODE_FLAG_3D_MASK) !=
- (mode2->flags & DRM_MODE_FLAG_3D_MASK))
- return false;
-
- return drm_mode_equal_no_clocks_no_stereo(mode1, mode2);
+ return drm_mode_match(mode1, mode2,
+ DRM_MODE_MATCH_TIMINGS |
+ DRM_MODE_MATCH_FLAGS |
+ DRM_MODE_MATCH_3D_FLAGS);
}
EXPORT_SYMBOL(drm_mode_equal_no_clocks);
bool drm_mode_equal_no_clocks_no_stereo(const struct drm_display_mode *mode1,
const struct drm_display_mode *mode2)
{
- if (mode1->hdisplay == mode2->hdisplay &&
- mode1->hsync_start == mode2->hsync_start &&
- mode1->hsync_end == mode2->hsync_end &&
- mode1->htotal == mode2->htotal &&
- mode1->hskew == mode2->hskew &&
- mode1->vdisplay == mode2->vdisplay &&
- mode1->vsync_start == mode2->vsync_start &&
- mode1->vsync_end == mode2->vsync_end &&
- mode1->vtotal == mode2->vtotal &&
- mode1->vscan == mode2->vscan &&
- (mode1->flags & ~DRM_MODE_FLAG_3D_MASK) ==
- (mode2->flags & ~DRM_MODE_FLAG_3D_MASK))
- return true;
-
- return false;
+ return drm_mode_match(mode1, mode2,
+ DRM_MODE_MATCH_TIMINGS |
+ DRM_MODE_MATCH_FLAGS);
}
EXPORT_SYMBOL(drm_mode_equal_no_clocks_no_stereo);
out->vrefresh = in->vrefresh;
out->flags = in->flags;
out->type = in->type;
+
+ switch (in->picture_aspect_ratio) {
+ case HDMI_PICTURE_ASPECT_4_3:
+ out->flags |= DRM_MODE_FLAG_PIC_AR_4_3;
+ break;
+ case HDMI_PICTURE_ASPECT_16_9:
+ out->flags |= DRM_MODE_FLAG_PIC_AR_16_9;
+ break;
+ case HDMI_PICTURE_ASPECT_64_27:
+ out->flags |= DRM_MODE_FLAG_PIC_AR_64_27;
+ break;
+ case HDMI_PICTURE_ASPECT_256_135:
+ out->flags |= DRM_MODE_FLAG_PIC_AR_256_135;
+ break;
+ case HDMI_PICTURE_ASPECT_RESERVED:
+ default:
+ out->flags |= DRM_MODE_FLAG_PIC_AR_NONE;
+ break;
+ }
+
strncpy(out->name, in->name, DRM_DISPLAY_MODE_LEN);
out->name[DRM_DISPLAY_MODE_LEN-1] = 0;
}
strncpy(out->name, in->name, DRM_DISPLAY_MODE_LEN);
out->name[DRM_DISPLAY_MODE_LEN-1] = 0;
+ /* Clearing picture aspect ratio bits from out flags,
+ * as the aspect-ratio information is not stored in
+ * flags for kernel-mode, but in picture_aspect_ratio.
+ */
+ out->flags &= ~DRM_MODE_FLAG_PIC_AR_MASK;
+
+ switch (in->flags & DRM_MODE_FLAG_PIC_AR_MASK) {
+ case DRM_MODE_FLAG_PIC_AR_4_3:
+ out->picture_aspect_ratio |= HDMI_PICTURE_ASPECT_4_3;
+ break;
+ case DRM_MODE_FLAG_PIC_AR_16_9:
+ out->picture_aspect_ratio |= HDMI_PICTURE_ASPECT_16_9;
+ break;
+ case DRM_MODE_FLAG_PIC_AR_64_27:
+ out->picture_aspect_ratio |= HDMI_PICTURE_ASPECT_64_27;
+ break;
+ case DRM_MODE_FLAG_PIC_AR_256_135:
+ out->picture_aspect_ratio |= HDMI_PICTURE_ASPECT_256_135;
+ break;
+ default:
+ out->picture_aspect_ratio = HDMI_PICTURE_ASPECT_NONE;
+ break;
+ }
+
out->status = drm_mode_validate_driver(dev, out);
if (out->status != MODE_OK)
return -EINVAL;
if (!bios_date)
continue;
- for (i = 0; data->bios_dates[i]; i++) {
- if (!strcmp(data->bios_dates[i], bios_date))
- return data->orientation;
- }
+ i = match_string(data->bios_dates, -1, bios_date);
+ if (i >= 0)
+ return data->orientation;
}
return DRM_MODE_PANEL_ORIENTATION_UNKNOWN;
struct drm_gem_object *obj = dma_buf->priv;
struct drm_device *dev = obj->dev;
- return dev->driver->gem_prime_vmap(obj);
+ if (dev->driver->gem_prime_vmap)
+ return dev->driver->gem_prime_vmap(obj);
+ else
+ return NULL;
}
EXPORT_SYMBOL(drm_gem_dmabuf_vmap);
struct drm_gem_object *obj = dma_buf->priv;
struct drm_device *dev = obj->dev;
- dev->driver->gem_prime_vunmap(obj, vaddr);
+ if (dev->driver->gem_prime_vunmap)
+ dev->driver->gem_prime_vunmap(obj, vaddr);
}
EXPORT_SYMBOL(drm_gem_dmabuf_vunmap);
return NULL;
for (i = 0; i < num_values; i++) {
- ret = drm_property_add_enum(property, i,
- props[i].type,
- props[i].name);
+ ret = drm_property_add_enum(property,
+ props[i].type,
+ props[i].name);
if (ret) {
drm_property_destroy(dev, property);
return NULL;
uint64_t supported_bits)
{
struct drm_property *property;
- int i, ret, index = 0;
+ int i, ret;
int num_values = hweight64(supported_bits);
flags |= DRM_MODE_PROP_BITMASK;
if (!(supported_bits & (1ULL << props[i].type)))
continue;
- if (WARN_ON(index >= num_values)) {
- drm_property_destroy(dev, property);
- return NULL;
- }
-
- ret = drm_property_add_enum(property, index++,
- props[i].type,
- props[i].name);
+ ret = drm_property_add_enum(property,
+ props[i].type,
+ props[i].name);
if (ret) {
drm_property_destroy(dev, property);
return NULL;
/**
* drm_property_add_enum - add a possible value to an enumeration property
* @property: enumeration property to change
- * @index: index of the new enumeration
* @value: value of the new enumeration
* @name: symbolic name of the new enumeration
*
* Returns:
* Zero on success, error code on failure.
*/
-int drm_property_add_enum(struct drm_property *property, int index,
+int drm_property_add_enum(struct drm_property *property,
uint64_t value, const char *name)
{
struct drm_property_enum *prop_enum;
+ int index = 0;
if (WARN_ON(strlen(name) >= DRM_PROP_NAME_LEN))
return -EINVAL;
list_for_each_entry(prop_enum, &property->enum_list, head) {
if (WARN_ON(prop_enum->value == value))
return -EINVAL;
+ index++;
}
+ if (WARN_ON(index >= property->num_values))
+ return -EINVAL;
+
prop_enum = kzalloc(sizeof(struct drm_property_enum), GFP_KERNEL);
if (!prop_enum)
return -ENOMEM;
}
EXPORT_SYMBOL(drm_rect_intersect);
+static u32 clip_scaled(u32 src, u32 dst, u32 clip)
+{
+ u64 tmp = mul_u32_u32(src, dst - clip);
+
+ /*
+ * Round toward 1.0 when clipping so that we don't accidentally
+ * change upscaling to downscaling or vice versa.
+ */
+ if (src < (dst << 16))
+ return DIV_ROUND_UP_ULL(tmp, dst);
+ else
+ return DIV_ROUND_DOWN_ULL(tmp, dst);
+}
+
/**
* drm_rect_clip_scaled - perform a scaled clip operation
* @src: source window rectangle
* @dst: destination window rectangle
* @clip: clip rectangle
- * @hscale: horizontal scaling factor
- * @vscale: vertical scaling factor
*
* Clip rectangle @dst by rectangle @clip. Clip rectangle @src by the
* same amounts multiplied by @hscale and @vscale.
* %false otherwise
*/
bool drm_rect_clip_scaled(struct drm_rect *src, struct drm_rect *dst,
- const struct drm_rect *clip,
- int hscale, int vscale)
+ const struct drm_rect *clip)
{
int diff;
diff = clip->x1 - dst->x1;
if (diff > 0) {
- int64_t tmp = src->x1 + (int64_t) diff * hscale;
- src->x1 = clamp_t(int64_t, tmp, INT_MIN, INT_MAX);
+ u32 new_src_w = clip_scaled(drm_rect_width(src),
+ drm_rect_width(dst), diff);
+
+ src->x1 = clamp_t(int64_t, src->x2 - new_src_w, INT_MIN, INT_MAX);
+ dst->x1 = clip->x1;
}
diff = clip->y1 - dst->y1;
if (diff > 0) {
- int64_t tmp = src->y1 + (int64_t) diff * vscale;
- src->y1 = clamp_t(int64_t, tmp, INT_MIN, INT_MAX);
+ u32 new_src_h = clip_scaled(drm_rect_height(src),
+ drm_rect_height(dst), diff);
+
+ src->y1 = clamp_t(int64_t, src->y2 - new_src_h, INT_MIN, INT_MAX);
+ dst->y1 = clip->y1;
}
diff = dst->x2 - clip->x2;
if (diff > 0) {
- int64_t tmp = src->x2 - (int64_t) diff * hscale;
- src->x2 = clamp_t(int64_t, tmp, INT_MIN, INT_MAX);
+ u32 new_src_w = clip_scaled(drm_rect_width(src),
+ drm_rect_width(dst), diff);
+
+ src->x2 = clamp_t(int64_t, src->x1 + new_src_w, INT_MIN, INT_MAX);
+ dst->x2 = clip->x2;
}
diff = dst->y2 - clip->y2;
if (diff > 0) {
- int64_t tmp = src->y2 - (int64_t) diff * vscale;
- src->y2 = clamp_t(int64_t, tmp, INT_MIN, INT_MAX);
+ u32 new_src_h = clip_scaled(drm_rect_height(src),
+ drm_rect_height(dst), diff);
+
+ src->y2 = clamp_t(int64_t, src->y1 + new_src_h, INT_MIN, INT_MAX);
+ dst->y2 = clip->y2;
}
- return drm_rect_intersect(dst, clip);
+ return drm_rect_visible(dst);
}
EXPORT_SYMBOL(drm_rect_clip_scaled);
if (dst == 0)
return 0;
- scale = src / dst;
+ if (src > (dst << 16))
+ return DIV_ROUND_UP(src, dst);
+ else
+ scale = src / dst;
return scale;
}
* Calculate the horizontal scaling factor as
* (@src width) / (@dst width).
*
+ * If the scale is below 1 << 16, round down. If the scale is above
+ * 1 << 16, round up. This will calculate the scale with the most
+ * pessimistic limit calculation.
+ *
* RETURNS:
* The horizontal scaling factor, or errno of out of limits.
*/
* Calculate the vertical scaling factor as
* (@src height) / (@dst height).
*
+ * If the scale is below 1 << 16, round down. If the scale is above
+ * 1 << 16, round up. This will calculate the scale with the most
+ * pessimistic limit calculation.
+ *
* RETURNS:
* The vertical scaling factor, or errno of out of limits.
*/
* If the calculated scaling factor is above @max_vscale,
* decrease the height of rectangle @src to compensate.
*
+ * If the scale is below 1 << 16, round down. If the scale is above
+ * 1 << 16, round up. This will calculate the scale with the most
+ * pessimistic limit calculation.
+ *
* RETURNS:
* The horizontal scaling factor.
*/
* If the calculated scaling factor is above @max_vscale,
* decrease the height of rectangle @src to compensate.
*
+ * If the scale is below 1 << 16, round down. If the scale is above
+ * 1 << 16, round up. This will calculate the scale with the most
+ * pessimistic limit calculation.
+ *
* RETURNS:
* The vertical scaling factor.
*/
* them when doing a rotatation and its inverse.
* That is, if you do ::
*
- * DRM_MODE_PROP_ROTATE(&r, width, height, rotation);
- * DRM_MODE_ROTATE_inv(&r, width, height, rotation);
+ * drm_rect_rotate(&r, width, height, rotation);
+ * drm_rect_rotate_inv(&r, width, height, rotation);
*
* you will always get back the original rectangle.
*/
struct device *kdev;
int r;
- if (minor->type == DRM_MINOR_CONTROL)
- minor_str = "controlD%d";
- else if (minor->type == DRM_MINOR_RENDER)
+ if (minor->type == DRM_MINOR_RENDER)
minor_str = "renderD%d";
else
minor_str = "card%d";
return;
for (i = 0; i < ARRAY_SIZE(force_audio_names); i++)
- drm_property_add_enum(prop, i, i-1, force_audio_names[i]);
+ drm_property_add_enum(prop, i-1, force_audio_names[i]);
dev_priv->force_audio_property = prop;
}
return;
for (i = 0; i < ARRAY_SIZE(broadcast_rgb_names); i++)
- drm_property_add_enum(prop, i, i, broadcast_rgb_names[i]);
+ drm_property_add_enum(prop, i, broadcast_rgb_names[i]);
dev_priv->broadcast_rgb_property = prop;
}
for (i = 0; i < psb_intel_sdvo_connector->format_supported_num; i++)
drm_property_add_enum(
- psb_intel_sdvo_connector->tv_format, i,
+ psb_intel_sdvo_connector->tv_format,
i, tv_format_names[psb_intel_sdvo_connector->tv_format_supported[i]]);
psb_intel_sdvo->tv_format_index = psb_intel_sdvo_connector->tv_format_supported[0];
select DRM_VGEM # used by igt/prime_vgem (dmabuf interop checks)
select DRM_DEBUG_MM if DRM=y
select STACKDEPOT if DRM=y # for DRM_DEBUG_MM
- select DRM_DEBUG_MM_SELFTEST
+ select DRM_DEBUG_SELFTEST
select SW_SYNC # signaling validation framework (igt/syncobj*)
select DRM_I915_SW_FENCE_DEBUG_OBJECTS
select DRM_I915_SELFTEST
DRM_IOCTL_DEF_DRV(I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, DRM_RENDER_ALLOW),
DRM_IOCTL_DEF_DRV(I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id_ioctl, 0),
DRM_IOCTL_DEF_DRV(I915_GEM_MADVISE, i915_gem_madvise_ioctl, DRM_RENDER_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_OVERLAY_PUT_IMAGE, intel_overlay_put_image_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_OVERLAY_ATTRS, intel_overlay_attrs_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_SET_SPRITE_COLORKEY, intel_sprite_set_colorkey_ioctl, DRM_MASTER|DRM_CONTROL_ALLOW),
- DRM_IOCTL_DEF_DRV(I915_GET_SPRITE_COLORKEY, drm_noop, DRM_MASTER|DRM_CONTROL_ALLOW),
+ DRM_IOCTL_DEF_DRV(I915_OVERLAY_PUT_IMAGE, intel_overlay_put_image_ioctl, DRM_MASTER),
+ DRM_IOCTL_DEF_DRV(I915_OVERLAY_ATTRS, intel_overlay_attrs_ioctl, DRM_MASTER),
+ DRM_IOCTL_DEF_DRV(I915_SET_SPRITE_COLORKEY, intel_sprite_set_colorkey_ioctl, DRM_MASTER),
+ DRM_IOCTL_DEF_DRV(I915_GET_SPRITE_COLORKEY, drm_noop, DRM_MASTER),
DRM_IOCTL_DEF_DRV(I915_GEM_WAIT, i915_gem_wait_ioctl, DRM_AUTH|DRM_RENDER_ALLOW),
DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_CREATE, i915_gem_context_create_ioctl, DRM_RENDER_ALLOW),
DRM_IOCTL_DEF_DRV(I915_GEM_CONTEXT_DESTROY, i915_gem_context_destroy_ioctl, DRM_RENDER_ALLOW),
return false;
for (i = 0; i < intel_sdvo_connector->format_supported_num; i++)
- drm_property_add_enum(
- intel_sdvo_connector->tv_format, i,
- i, tv_format_names[intel_sdvo_connector->tv_format_supported[i]]);
+ drm_property_add_enum(intel_sdvo_connector->tv_format, i,
+ tv_format_names[intel_sdvo_connector->tv_format_supported[i]]);
intel_sdvo_connector->base.base.state->tv.mode = intel_sdvo_connector->tv_format_supported[0];
drm_object_attach_property(&intel_sdvo_connector->base.base.base,
struct drm_i915_private *dev_priv = to_i915(plane->base.dev);
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
struct drm_framebuffer *fb = state->base.fb;
- int crtc_x, crtc_y;
- unsigned int crtc_w, crtc_h;
- uint32_t src_x, src_y, src_w, src_h;
- struct drm_rect *src = &state->base.src;
- struct drm_rect *dst = &state->base.dst;
- struct drm_rect clip = {};
int max_stride = INTEL_GEN(dev_priv) >= 9 ? 32768 : 16384;
- int hscale, vscale;
int max_scale, min_scale;
bool can_scale;
int ret;
uint32_t pixel_format = 0;
- *src = drm_plane_state_src(&state->base);
- *dst = drm_plane_state_dest(&state->base);
-
if (!fb) {
state->base.visible = false;
return 0;
min_scale = plane->can_scale ? 1 : (1 << 16);
}
- /*
- * FIXME the following code does a bunch of fuzzy adjustments to the
- * coordinates and sizes. We probably need some way to decide whether
- * more strict checking should be done instead.
- */
- drm_rect_rotate(src, fb->width << 16, fb->height << 16,
- state->base.rotation);
-
- hscale = drm_rect_calc_hscale_relaxed(src, dst, min_scale, max_scale);
- BUG_ON(hscale < 0);
-
- vscale = drm_rect_calc_vscale_relaxed(src, dst, min_scale, max_scale);
- BUG_ON(vscale < 0);
-
- if (crtc_state->base.enable)
- drm_mode_get_hv_timing(&crtc_state->base.mode,
- &clip.x2, &clip.y2);
-
- state->base.visible = drm_rect_clip_scaled(src, dst, &clip, hscale, vscale);
-
- crtc_x = dst->x1;
- crtc_y = dst->y1;
- crtc_w = drm_rect_width(dst);
- crtc_h = drm_rect_height(dst);
+ ret = drm_atomic_helper_check_plane_state(&state->base,
+ &crtc_state->base,
+ min_scale, max_scale,
+ true, true);
+ if (ret)
+ return ret;
if (state->base.visible) {
- /* check again in case clipping clamped the results */
- hscale = drm_rect_calc_hscale(src, dst, min_scale, max_scale);
- if (hscale < 0) {
- DRM_DEBUG_KMS("Horizontal scaling factor out of limits\n");
- drm_rect_debug_print("src: ", src, true);
- drm_rect_debug_print("dst: ", dst, false);
-
- return hscale;
- }
-
- vscale = drm_rect_calc_vscale(src, dst, min_scale, max_scale);
- if (vscale < 0) {
- DRM_DEBUG_KMS("Vertical scaling factor out of limits\n");
- drm_rect_debug_print("src: ", src, true);
- drm_rect_debug_print("dst: ", dst, false);
-
- return vscale;
- }
-
- /* Make the source viewport size an exact multiple of the scaling factors. */
- drm_rect_adjust_size(src,
- drm_rect_width(dst) * hscale - drm_rect_width(src),
- drm_rect_height(dst) * vscale - drm_rect_height(src));
-
- drm_rect_rotate_inv(src, fb->width << 16, fb->height << 16,
- state->base.rotation);
-
- /* sanity check to make sure the src viewport wasn't enlarged */
- WARN_ON(src->x1 < (int) state->base.src_x ||
- src->y1 < (int) state->base.src_y ||
- src->x2 > (int) state->base.src_x + state->base.src_w ||
- src->y2 > (int) state->base.src_y + state->base.src_h);
+ struct drm_rect *src = &state->base.src;
+ struct drm_rect *dst = &state->base.dst;
+ unsigned int crtc_w = drm_rect_width(dst);
+ unsigned int crtc_h = drm_rect_height(dst);
+ uint32_t src_x, src_y, src_w, src_h;
/*
* Hardware doesn't handle subpixel coordinates.
src_y = src->y1 >> 16;
src_h = drm_rect_height(src) >> 16;
- if (intel_format_is_yuv(fb->format->format)) {
- src_x &= ~1;
- src_w &= ~1;
-
- /*
- * Must keep src and dst the
- * same if we can't scale.
- */
- if (!can_scale)
- crtc_w &= ~1;
+ src->x1 = src_x << 16;
+ src->x2 = (src_x + src_w) << 16;
+ src->y1 = src_y << 16;
+ src->y2 = (src_y + src_h) << 16;
- if (crtc_w == 0)
- state->base.visible = false;
+ if (intel_format_is_yuv(fb->format->format) &&
+ (src_x % 2 || src_w % 2)) {
+ DRM_DEBUG_KMS("src x/w (%u, %u) must be a multiple of 2 for YUV planes\n",
+ src_x, src_w);
+ return -EINVAL;
}
- }
- /* Check size restrictions when scaling */
- if (state->base.visible && (src_w != crtc_w || src_h != crtc_h)) {
- unsigned int width_bytes;
- int cpp = fb->format->cpp[0];
+ /* Check size restrictions when scaling */
+ if (src_w != crtc_w || src_h != crtc_h) {
+ unsigned int width_bytes;
+ int cpp = fb->format->cpp[0];
- WARN_ON(!can_scale);
+ WARN_ON(!can_scale);
- /* FIXME interlacing min height is 6 */
+ width_bytes = ((src_x * cpp) & 63) + src_w * cpp;
- if (crtc_w < 3 || crtc_h < 3)
- state->base.visible = false;
-
- if (src_w < 3 || src_h < 3)
- state->base.visible = false;
-
- width_bytes = ((src_x * cpp) & 63) + src_w * cpp;
-
- if (INTEL_GEN(dev_priv) < 9 && (src_w > 2048 || src_h > 2048 ||
- width_bytes > 4096 || fb->pitches[0] > 4096)) {
- DRM_DEBUG_KMS("Source dimensions exceed hardware limits\n");
- return -EINVAL;
+ /* FIXME interlacing min height is 6 */
+ if (INTEL_GEN(dev_priv) < 9 && (
+ src_w < 3 || src_h < 3 ||
+ src_w > 2048 || src_h > 2048 ||
+ crtc_w < 3 || crtc_h < 3 ||
+ width_bytes > 4096 || fb->pitches[0] > 4096)) {
+ DRM_DEBUG_KMS("Source dimensions exceed hardware limits\n");
+ return -EINVAL;
+ }
}
}
- if (state->base.visible) {
- src->x1 = src_x << 16;
- src->x2 = (src_x + src_w) << 16;
- src->y1 = src_y << 16;
- src->y2 = (src_y + src_h) << 16;
- }
-
- dst->x1 = crtc_x;
- dst->x2 = crtc_x + crtc_w;
- dst->y1 = crtc_y;
- dst->y2 = crtc_y + crtc_h;
-
if (INTEL_GEN(dev_priv) >= 9) {
ret = skl_check_plane_surface(crtc_state, state);
if (ret)
if (gpu->funcs->debugfs_init) {
gpu->funcs->debugfs_init(gpu, dev->primary);
gpu->funcs->debugfs_init(gpu, dev->render);
- gpu->funcs->debugfs_init(gpu, dev->control);
}
#endif
if (ret)
return ret;
ret = late_init_minor(dev->render);
- if (ret)
- return ret;
- ret = late_init_minor(dev->control);
return ret;
}
if (c) { \
p = drm_property_create(dev, DRM_MODE_PROP_ENUM, n, c); \
l = (list); \
- c = 0; \
while (p && l->gen_mask) { \
if (l->gen_mask & (1 << (gen))) { \
- drm_property_add_enum(p, c, l->type, l->name); \
- c++; \
+ drm_property_add_enum(p, l->type, l->name); \
} \
l++; \
} \
static int rpi_touchscreen_write(struct rpi_touchscreen *ts, u16 reg, u32 val)
{
-#if 0
- /* The firmware uses LP DSI transactions like this to bring up
- * the hardware, which should be faster than using I2C to then
- * pass to the Toshiba. However, I was unable to get it to
- * work.
- */
u8 msg[] = {
reg,
reg >> 8,
val >> 24,
};
- mipi_dsi_dcs_write_buffer(ts->dsi, msg, sizeof(msg));
-#else
- rpi_touchscreen_i2c_write(ts, REG_WR_ADDRH, reg >> 8);
- rpi_touchscreen_i2c_write(ts, REG_WR_ADDRL, reg);
- rpi_touchscreen_i2c_write(ts, REG_WRITEH, val >> 8);
- rpi_touchscreen_i2c_write(ts, REG_WRITEL, val);
-#endif
+ mipi_dsi_generic_write(ts->dsi, msg, sizeof(msg));
return 0;
}
pl111_versatile.o \
pl111_drv.o
+pl111_drm-$(CONFIG_ARCH_VEXPRESS) += pl111_vexpress.o
pl111_drm-$(CONFIG_DEBUG_FS) += pl111_debugfs.o
obj-$(CONFIG_DRM_PL111) += pl111_drm.o
const struct pl111_variant_data *variant;
void (*variant_display_enable) (struct drm_device *drm, u32 format);
void (*variant_display_disable) (struct drm_device *drm);
+ bool use_device_memory;
};
int pl111_display_init(struct drm_device *dev);
#include <linux/slab.h>
#include <linux/of.h>
#include <linux/of_graph.h>
+#include <linux/of_reserved_mem.h>
#include <drm/drmP.h>
#include <drm/drm_atomic_helper.h>
return ret;
}
+static struct drm_gem_object *
+pl111_gem_import_sg_table(struct drm_device *dev,
+ struct dma_buf_attachment *attach,
+ struct sg_table *sgt)
+{
+ struct pl111_drm_dev_private *priv = dev->dev_private;
+
+ /*
+ * When using device-specific reserved memory we can't import
+ * DMA buffers: those are passed by reference in any global
+ * memory and we can only handle a specific range of memory.
+ */
+ if (priv->use_device_memory)
+ return ERR_PTR(-EINVAL);
+
+ return drm_gem_cma_prime_import_sg_table(dev, attach, sgt);
+}
+
DEFINE_DRM_GEM_CMA_FOPS(drm_fops);
static struct drm_driver pl111_drm_driver = {
.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
.gem_prime_import = drm_gem_prime_import,
- .gem_prime_import_sg_table = drm_gem_cma_prime_import_sg_table,
+ .gem_prime_import_sg_table = pl111_gem_import_sg_table,
.gem_prime_export = drm_gem_prime_export,
.gem_prime_get_sg_table = drm_gem_cma_prime_get_sg_table,
drm->dev_private = priv;
priv->variant = variant;
+ ret = of_reserved_mem_device_init(dev);
+ if (!ret) {
+ dev_info(dev, "using device-specific reserved memory\n");
+ priv->use_device_memory = true;
+ }
+
if (of_property_read_u32(dev->of_node, "max-memory-bandwidth",
&priv->memory_bw)) {
dev_info(dev, "no max memory bandwidth specified, assume unlimited\n");
priv->regs = devm_ioremap_resource(dev, &amba_dev->res);
if (IS_ERR(priv->regs)) {
dev_err(dev, "%s failed mmio\n", __func__);
- return PTR_ERR(priv->regs);
+ ret = PTR_ERR(priv->regs);
+ goto dev_unref;
}
/* This may override some variant settings */
dev_unref:
drm_dev_unref(drm);
+ of_reserved_mem_device_release(dev);
+
return ret;
}
static int pl111_amba_remove(struct amba_device *amba_dev)
{
+ struct device *dev = &amba_dev->dev;
struct drm_device *drm = amba_get_drvdata(amba_dev);
struct pl111_drm_dev_private *priv = drm->dev_private;
drm_panel_bridge_remove(priv->bridge);
drm_mode_config_cleanup(drm);
drm_dev_unref(drm);
+ of_reserved_mem_device_release(dev);
return 0;
}
#include <linux/amba/clcd-regs.h>
#include <linux/device.h>
#include <linux/of.h>
+#include <linux/of_platform.h>
#include <linux/regmap.h>
#include <linux/mfd/syscon.h>
#include <linux/bitops.h>
#include <linux/module.h>
#include <drm/drmP.h>
#include "pl111_versatile.h"
+#include "pl111_vexpress.h"
#include "pl111_drm.h"
static struct regmap *versatile_syscon_map;
REALVIEW_CLCD_PB11MP,
REALVIEW_CLCD_PBA8,
REALVIEW_CLCD_PBX,
+ VEXPRESS_CLCD_V2M,
};
static const struct of_device_id versatile_clcd_of_match[] = {
.compatible = "arm,realview-pbx-syscon",
.data = (void *)REALVIEW_CLCD_PBX,
},
+ {
+ .compatible = "arm,vexpress-muxfpga",
+ .data = (void *)VEXPRESS_CLCD_V2M,
+ },
{},
};
.fb_bpp = 16,
};
+/*
+ * Versatile Express PL111 variant, again we just push the maximum
+ * BPP to 16 to be able to get 1024x768 without saturating the memory
+ * bus. The clockdivider also seems broken on the Versatile Express.
+ */
+static const struct pl111_variant_data pl111_vexpress = {
+ .name = "PL111 Versatile Express",
+ .formats = pl111_realview_pixel_formats,
+ .nformats = ARRAY_SIZE(pl111_realview_pixel_formats),
+ .fb_bpp = 16,
+ .broken_clockdivider = true,
+};
+
int pl111_versatile_init(struct device *dev, struct pl111_drm_dev_private *priv)
{
const struct of_device_id *clcd_id;
enum versatile_clcd versatile_clcd_type;
struct device_node *np;
struct regmap *map;
+ int ret;
np = of_find_matching_node_and_match(NULL, versatile_clcd_of_match,
&clcd_id);
}
versatile_clcd_type = (enum versatile_clcd)clcd_id->data;
- map = syscon_node_to_regmap(np);
+ /* Versatile Express special handling */
+ if (versatile_clcd_type == VEXPRESS_CLCD_V2M) {
+ struct platform_device *pdev;
+
+ /* Registers a driver for the muxfpga */
+ ret = vexpress_muxfpga_init();
+ if (ret) {
+ dev_err(dev, "unable to initialize muxfpga driver\n");
+ return ret;
+ }
+
+ /* Call into deep Vexpress configuration API */
+ pdev = of_find_device_by_node(np);
+ if (!pdev) {
+ dev_err(dev, "can't find the sysreg device, deferring\n");
+ return -EPROBE_DEFER;
+ }
+ map = dev_get_drvdata(&pdev->dev);
+ if (!map) {
+ dev_err(dev, "sysreg has not yet probed\n");
+ platform_device_put(pdev);
+ return -EPROBE_DEFER;
+ }
+ } else {
+ map = syscon_node_to_regmap(np);
+ }
+
if (IS_ERR(map)) {
dev_err(dev, "no Versatile syscon regmap\n");
return PTR_ERR(map);
priv->variant_display_disable = pl111_realview_clcd_disable;
dev_info(dev, "set up callbacks for RealView PL111\n");
break;
+ case VEXPRESS_CLCD_V2M:
+ priv->variant = &pl111_vexpress;
+ dev_info(dev, "initializing Versatile Express PL111\n");
+ ret = pl111_vexpress_clcd_init(dev, priv, map);
+ if (ret)
+ return ret;
+ break;
default:
dev_info(dev, "unknown Versatile system controller\n");
break;
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Versatile Express PL111 handling
+ * Copyright (C) 2018 Linus Walleij
+ *
+ * This module binds to the "arm,vexpress-muxfpga" device on the
+ * Versatile Express configuration bus and sets up which CLCD instance
+ * gets muxed out on the DVI bridge.
+ */
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/regmap.h>
+#include <linux/vexpress.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include "pl111_drm.h"
+#include "pl111_vexpress.h"
+
+#define VEXPRESS_FPGAMUX_MOTHERBOARD 0x00
+#define VEXPRESS_FPGAMUX_DAUGHTERBOARD_1 0x01
+#define VEXPRESS_FPGAMUX_DAUGHTERBOARD_2 0x02
+
+int pl111_vexpress_clcd_init(struct device *dev,
+ struct pl111_drm_dev_private *priv,
+ struct regmap *map)
+{
+ struct device_node *root;
+ struct device_node *child;
+ struct device_node *ct_clcd = NULL;
+ bool has_coretile_clcd = false;
+ bool has_coretile_hdlcd = false;
+ bool mux_motherboard = true;
+ u32 val;
+ int ret;
+
+ /*
+ * Check if we have a CLCD or HDLCD on the core tile by checking if a
+ * CLCD or HDLCD is available in the root of the device tree.
+ */
+ root = of_find_node_by_path("/");
+ if (!root)
+ return -EINVAL;
+
+ for_each_available_child_of_node(root, child) {
+ if (of_device_is_compatible(child, "arm,pl111")) {
+ has_coretile_clcd = true;
+ ct_clcd = child;
+ break;
+ }
+ if (of_device_is_compatible(child, "arm,hdlcd")) {
+ has_coretile_hdlcd = true;
+ break;
+ }
+ }
+
+ /*
+ * If there is a coretile HDLCD and it has a driver,
+ * do not mux the CLCD on the motherboard to the DVI.
+ */
+ if (has_coretile_hdlcd && IS_ENABLED(CONFIG_DRM_HDLCD))
+ mux_motherboard = false;
+
+ /*
+ * On the Vexpress CA9 we let the CLCD on the coretile
+ * take precedence, so also in this case do not mux the
+ * motherboard to the DVI.
+ */
+ if (has_coretile_clcd)
+ mux_motherboard = false;
+
+ if (mux_motherboard) {
+ dev_info(dev, "DVI muxed to motherboard CLCD\n");
+ val = VEXPRESS_FPGAMUX_MOTHERBOARD;
+ } else if (ct_clcd == dev->of_node) {
+ dev_info(dev,
+ "DVI muxed to daughterboard 1 (core tile) CLCD\n");
+ val = VEXPRESS_FPGAMUX_DAUGHTERBOARD_1;
+ } else {
+ dev_info(dev, "core tile graphics present\n");
+ dev_info(dev, "this device will be deactivated\n");
+ return -ENODEV;
+ }
+
+ ret = regmap_write(map, 0, val);
+ if (ret) {
+ dev_err(dev, "error setting DVI muxmode\n");
+ return -ENODEV;
+ }
+
+ return 0;
+}
+
+/*
+ * This sets up the regmap pointer that will then be retrieved by
+ * the detection code in pl111_versatile.c and passed in to the
+ * pl111_vexpress_clcd_init() function above.
+ */
+static int vexpress_muxfpga_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct regmap *map;
+
+ map = devm_regmap_init_vexpress_config(&pdev->dev);
+ if (IS_ERR(map))
+ return PTR_ERR(map);
+ dev_set_drvdata(dev, map);
+
+ return 0;
+}
+
+static const struct of_device_id vexpress_muxfpga_match[] = {
+ { .compatible = "arm,vexpress-muxfpga", }
+};
+
+static struct platform_driver vexpress_muxfpga_driver = {
+ .driver = {
+ .name = "vexpress-muxfpga",
+ .of_match_table = of_match_ptr(vexpress_muxfpga_match),
+ },
+ .probe = vexpress_muxfpga_probe,
+};
+
+int vexpress_muxfpga_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&vexpress_muxfpga_driver);
+ /* -EBUSY just means this driver is already registered */
+ if (ret == -EBUSY)
+ ret = 0;
+ return ret;
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0
+
+struct device;
+struct pl111_drm_dev_private;
+struct regmap;
+
+#ifdef CONFIG_ARCH_VEXPRESS
+
+int pl111_vexpress_clcd_init(struct device *dev,
+ struct pl111_drm_dev_private *priv,
+ struct regmap *map);
+
+int vexpress_muxfpga_init(void);
+
+#else
+
+static inline int pl111_vexpress_clcd_init(struct device *dev,
+ struct pl111_drm_dev_private *priv,
+ struct regmap *map)
+{
+ return -ENODEV;
+}
+
+static inline int vexpress_muxfpga_init(void)
+{
+ return 0;
+}
+
+#endif
surface_height = surf->surf.height;
if (area->left < 0 || area->top < 0 ||
- area->right > surface_width || area->bottom > surface_height) {
- qxl_io_log(qdev, "%s: not doing area update for "
- "%d, (%d,%d,%d,%d) (%d,%d)\n", __func__, surface_id, area->left,
- area->top, area->right, area->bottom, surface_width, surface_height);
+ area->right > surface_width || area->bottom > surface_height)
return -EINVAL;
- }
+
mutex_lock(&qdev->update_area_mutex);
qdev->ram_header->update_area = *area;
qdev->ram_header->update_surface = surface_id;
void qxl_io_destroy_primary(struct qxl_device *qdev)
{
wait_for_io_cmd(qdev, 0, QXL_IO_DESTROY_PRIMARY_ASYNC);
+ qdev->primary_created = false;
}
void qxl_io_create_primary(struct qxl_device *qdev,
create->type = QXL_SURF_TYPE_PRIMARY;
wait_for_io_cmd(qdev, 0, QXL_IO_CREATE_PRIMARY_ASYNC);
+ qdev->primary_created = true;
}
void qxl_io_memslot_add(struct qxl_device *qdev, uint8_t id)
wait_for_io_cmd(qdev, id, QXL_IO_MEMSLOT_ADD_ASYNC);
}
-void qxl_io_log(struct qxl_device *qdev, const char *fmt, ...)
-{
- va_list args;
-
- va_start(args, fmt);
- vsnprintf(qdev->ram_header->log_buf, QXL_LOG_BUF_SIZE, fmt, args);
- va_end(args);
- /*
- * DO not do a DRM output here - this will call printk, which will
- * call back into qxl for rendering (qxl_fb)
- */
- outb(0, qdev->io_base + QXL_IO_LOG);
-}
-
void qxl_io_reset(struct qxl_device *qdev)
{
outb(0, qdev->io_base + QXL_IO_RESET);
void qxl_io_monitors_config(struct qxl_device *qdev)
{
- qxl_io_log(qdev, "%s: %d [%dx%d+%d+%d]\n", __func__,
- qdev->monitors_config ?
- qdev->monitors_config->count : -1,
- qdev->monitors_config && qdev->monitors_config->count ?
- qdev->monitors_config->heads[0].width : -1,
- qdev->monitors_config && qdev->monitors_config->count ?
- qdev->monitors_config->heads[0].height : -1,
- qdev->monitors_config && qdev->monitors_config->count ?
- qdev->monitors_config->heads[0].x : -1,
- qdev->monitors_config && qdev->monitors_config->count ?
- qdev->monitors_config->heads[0].y : -1
- );
-
wait_for_io_cmd(qdev, 0, QXL_IO_MONITORS_CONFIG_ASYNC);
}
qdev->client_monitors_config = kzalloc(
sizeof(struct qxl_monitors_config) +
sizeof(struct qxl_head) * count, GFP_KERNEL);
- if (!qdev->client_monitors_config) {
- qxl_io_log(qdev,
- "%s: allocation failure for %u heads\n",
- __func__, count);
+ if (!qdev->client_monitors_config)
return;
- }
}
qdev->client_monitors_config->count = count;
}
num_monitors = qdev->rom->client_monitors_config.count;
crc = crc32(0, (const uint8_t *)&qdev->rom->client_monitors_config,
sizeof(qdev->rom->client_monitors_config));
- if (crc != qdev->rom->client_monitors_config_crc) {
- qxl_io_log(qdev, "crc mismatch: have %X (%zd) != %X\n", crc,
- sizeof(qdev->rom->client_monitors_config),
- qdev->rom->client_monitors_config_crc);
+ if (crc != qdev->rom->client_monitors_config_crc)
return MONITORS_CONFIG_BAD_CRC;
- }
if (!num_monitors) {
DRM_DEBUG_KMS("no client monitors configured\n");
return status;
udelay(5);
}
if (status == MONITORS_CONFIG_BAD_CRC) {
- qxl_io_log(qdev, "config: bad crc\n");
DRM_DEBUG_KMS("ignoring client monitors config: bad crc");
return;
}
if (status == MONITORS_CONFIG_UNCHANGED) {
- qxl_io_log(qdev, "config: unchanged\n");
DRM_DEBUG_KMS("ignoring client monitors config: unchanged");
return;
}
return i - 1;
}
+static void qxl_send_monitors_config(struct qxl_device *qdev)
+{
+ int i;
+
+ BUG_ON(!qdev->ram_header->monitors_config);
+
+ if (qdev->monitors_config->count == 0)
+ return;
+
+ for (i = 0 ; i < qdev->monitors_config->count ; ++i) {
+ struct qxl_head *head = &qdev->monitors_config->heads[i];
+
+ if (head->y > 8192 || head->x > 8192 ||
+ head->width > 8192 || head->height > 8192) {
+ DRM_ERROR("head %d wrong: %dx%d+%d+%d\n",
+ i, head->width, head->height,
+ head->x, head->y);
+ return;
+ }
+ }
+ qxl_io_monitors_config(qdev);
+}
+
+static void qxl_crtc_update_monitors_config(struct drm_crtc *crtc,
+ const char *reason)
+{
+ struct drm_device *dev = crtc->dev;
+ struct qxl_device *qdev = dev->dev_private;
+ struct qxl_crtc *qcrtc = to_qxl_crtc(crtc);
+ struct qxl_head head;
+ int oldcount, i = qcrtc->index;
+
+ if (!qdev->primary_created) {
+ DRM_DEBUG_KMS("no primary surface, skip (%s)\n", reason);
+ return;
+ }
+
+ if (!qdev->monitors_config ||
+ qdev->monitors_config->max_allowed <= i)
+ return;
+
+ head.id = i;
+ head.flags = 0;
+ oldcount = qdev->monitors_config->count;
+ if (crtc->state->active) {
+ struct drm_display_mode *mode = &crtc->mode;
+ head.width = mode->hdisplay;
+ head.height = mode->vdisplay;
+ head.x = crtc->x;
+ head.y = crtc->y;
+ if (qdev->monitors_config->count < i + 1)
+ qdev->monitors_config->count = i + 1;
+ } else if (i > 0) {
+ head.width = 0;
+ head.height = 0;
+ head.x = 0;
+ head.y = 0;
+ if (qdev->monitors_config->count == i + 1)
+ qdev->monitors_config->count = i;
+ } else {
+ DRM_DEBUG_KMS("inactive head 0, skip (%s)\n", reason);
+ return;
+ }
+
+ if (head.width == qdev->monitors_config->heads[i].width &&
+ head.height == qdev->monitors_config->heads[i].height &&
+ head.x == qdev->monitors_config->heads[i].x &&
+ head.y == qdev->monitors_config->heads[i].y &&
+ oldcount == qdev->monitors_config->count)
+ return;
+
+ DRM_DEBUG_KMS("head %d, %dx%d, at +%d+%d, %s (%s)\n",
+ i, head.width, head.height, head.x, head.y,
+ crtc->state->active ? "on" : "off", reason);
+ if (oldcount != qdev->monitors_config->count)
+ DRM_DEBUG_KMS("active heads %d -> %d (%d total)\n",
+ oldcount, qdev->monitors_config->count,
+ qdev->monitors_config->max_allowed);
+
+ qdev->monitors_config->heads[i] = head;
+ qxl_send_monitors_config(qdev);
+}
+
static void qxl_crtc_atomic_flush(struct drm_crtc *crtc,
struct drm_crtc_state *old_crtc_state)
{
drm_crtc_send_vblank_event(crtc, event);
spin_unlock_irqrestore(&dev->event_lock, flags);
}
+
+ qxl_crtc_update_monitors_config(crtc, "flush");
}
static void qxl_crtc_destroy(struct drm_crtc *crtc)
return 0;
}
-static bool qxl_crtc_mode_fixup(struct drm_crtc *crtc,
- const struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- struct drm_device *dev = crtc->dev;
- struct qxl_device *qdev = dev->dev_private;
-
- qxl_io_log(qdev, "%s: (%d,%d) => (%d,%d)\n",
- __func__,
- mode->hdisplay, mode->vdisplay,
- adjusted_mode->hdisplay,
- adjusted_mode->vdisplay);
- return true;
-}
-
-static void
-qxl_send_monitors_config(struct qxl_device *qdev)
-{
- int i;
-
- BUG_ON(!qdev->ram_header->monitors_config);
-
- if (qdev->monitors_config->count == 0) {
- qxl_io_log(qdev, "%s: 0 monitors??\n", __func__);
- return;
- }
- for (i = 0 ; i < qdev->monitors_config->count ; ++i) {
- struct qxl_head *head = &qdev->monitors_config->heads[i];
-
- if (head->y > 8192 || head->x > 8192 ||
- head->width > 8192 || head->height > 8192) {
- DRM_ERROR("head %d wrong: %dx%d+%d+%d\n",
- i, head->width, head->height,
- head->x, head->y);
- return;
- }
- }
- qxl_io_monitors_config(qdev);
-}
-
-static void qxl_monitors_config_set(struct qxl_device *qdev,
- int index,
- unsigned x, unsigned y,
- unsigned width, unsigned height,
- unsigned surf_id)
-{
- DRM_DEBUG_KMS("%d:%dx%d+%d+%d\n", index, width, height, x, y);
- qdev->monitors_config->heads[index].x = x;
- qdev->monitors_config->heads[index].y = y;
- qdev->monitors_config->heads[index].width = width;
- qdev->monitors_config->heads[index].height = height;
- qdev->monitors_config->heads[index].surface_id = surf_id;
-
-}
-
-static void qxl_mode_set_nofb(struct drm_crtc *crtc)
-{
- struct qxl_device *qdev = crtc->dev->dev_private;
- struct qxl_crtc *qcrtc = to_qxl_crtc(crtc);
- struct drm_display_mode *mode = &crtc->mode;
-
- DRM_DEBUG("Mode set (%d,%d)\n",
- mode->hdisplay, mode->vdisplay);
-
- qxl_monitors_config_set(qdev, qcrtc->index, 0, 0,
- mode->hdisplay, mode->vdisplay, 0);
-
-}
-
static void qxl_crtc_atomic_enable(struct drm_crtc *crtc,
struct drm_crtc_state *old_state)
{
- DRM_DEBUG("\n");
+ qxl_crtc_update_monitors_config(crtc, "enable");
}
static void qxl_crtc_atomic_disable(struct drm_crtc *crtc,
struct drm_crtc_state *old_state)
{
- struct qxl_crtc *qcrtc = to_qxl_crtc(crtc);
- struct qxl_device *qdev = crtc->dev->dev_private;
-
- qxl_monitors_config_set(qdev, qcrtc->index, 0, 0, 0, 0, 0);
-
- qxl_send_monitors_config(qdev);
+ qxl_crtc_update_monitors_config(crtc, "disable");
}
static const struct drm_crtc_helper_funcs qxl_crtc_helper_funcs = {
- .mode_fixup = qxl_crtc_mode_fixup,
- .mode_set_nofb = qxl_mode_set_nofb,
.atomic_flush = qxl_crtc_atomic_flush,
.atomic_enable = qxl_crtc_atomic_enable,
.atomic_disable = qxl_crtc_atomic_disable,
}
}
-static int qxl_plane_atomic_check(struct drm_plane *plane,
- struct drm_plane_state *state)
-{
- return 0;
-}
-
static void qxl_cursor_atomic_update(struct drm_plane *plane,
struct drm_plane_state *old_state)
{
};
static const struct drm_plane_helper_funcs qxl_cursor_helper_funcs = {
- .atomic_check = qxl_plane_atomic_check,
.atomic_update = qxl_cursor_atomic_update,
.atomic_disable = qxl_cursor_atomic_disable,
.prepare_fb = qxl_plane_prepare_fb,
return r;
}
-static void qxl_enc_dpms(struct drm_encoder *encoder, int mode)
-{
- DRM_DEBUG("\n");
-}
-
-static void qxl_enc_prepare(struct drm_encoder *encoder)
-{
- DRM_DEBUG("\n");
-}
-
-static void qxl_write_monitors_config_for_encoder(struct qxl_device *qdev,
- struct drm_encoder *encoder)
-{
- int i;
- struct qxl_output *output = drm_encoder_to_qxl_output(encoder);
- struct qxl_head *head;
- struct drm_display_mode *mode;
-
- BUG_ON(!encoder);
- /* TODO: ugly, do better */
- i = output->index;
- if (!qdev->monitors_config ||
- qdev->monitors_config->max_allowed <= i) {
- DRM_ERROR(
- "head number too large or missing monitors config: %p, %d",
- qdev->monitors_config,
- qdev->monitors_config ?
- qdev->monitors_config->max_allowed : -1);
- return;
- }
- if (!encoder->crtc) {
- DRM_ERROR("missing crtc on encoder %p\n", encoder);
- return;
- }
- if (i != 0)
- DRM_DEBUG("missing for multiple monitors: no head holes\n");
- head = &qdev->monitors_config->heads[i];
- head->id = i;
- if (encoder->crtc->enabled) {
- mode = &encoder->crtc->mode;
- head->width = mode->hdisplay;
- head->height = mode->vdisplay;
- head->x = encoder->crtc->x;
- head->y = encoder->crtc->y;
- if (qdev->monitors_config->count < i + 1)
- qdev->monitors_config->count = i + 1;
- } else {
- head->width = 0;
- head->height = 0;
- head->x = 0;
- head->y = 0;
- }
- DRM_DEBUG_KMS("setting head %d to +%d+%d %dx%d out of %d\n",
- i, head->x, head->y, head->width, head->height, qdev->monitors_config->count);
- head->flags = 0;
- /* TODO - somewhere else to call this for multiple monitors
- * (config_commit?) */
- qxl_send_monitors_config(qdev);
-}
-
-static void qxl_enc_commit(struct drm_encoder *encoder)
-{
- struct qxl_device *qdev = encoder->dev->dev_private;
-
- qxl_write_monitors_config_for_encoder(qdev, encoder);
- DRM_DEBUG("\n");
-}
-
-static void qxl_enc_mode_set(struct drm_encoder *encoder,
- struct drm_display_mode *mode,
- struct drm_display_mode *adjusted_mode)
-{
- DRM_DEBUG("\n");
-}
-
static int qxl_conn_get_modes(struct drm_connector *connector)
{
unsigned pwidth = 1024;
static const struct drm_encoder_helper_funcs qxl_enc_helper_funcs = {
- .dpms = qxl_enc_dpms,
- .prepare = qxl_enc_prepare,
- .mode_set = qxl_enc_mode_set,
- .commit = qxl_enc_commit,
};
static const struct drm_connector_helper_funcs qxl_connector_helper_funcs = {
qxl_head_enabled(&qdev->client_monitors_config->heads[output->index]);
DRM_DEBUG("#%d connected: %d\n", output->index, connected);
- if (!connected)
- qxl_monitors_config_set(qdev, output->index, 0, 0, 0, 0, 0);
return connected ? connector_status_connected
: connector_status_disconnected;
}
-static int qxl_conn_set_property(struct drm_connector *connector,
- struct drm_property *property,
- uint64_t value)
-{
- DRM_DEBUG("\n");
- return 0;
-}
-
static void qxl_conn_destroy(struct drm_connector *connector)
{
struct qxl_output *qxl_output =
.dpms = drm_helper_connector_dpms,
.detect = qxl_conn_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
- .set_property = qxl_conn_set_property,
.destroy = qxl_conn_destroy,
.reset = drm_atomic_helper_connector_reset,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
int monitors_config_height;
};
-/* forward declaration for QXL_INFO_IO */
-__printf(2,3) void qxl_io_log(struct qxl_device *qdev, const char *fmt, ...);
-
extern const struct drm_ioctl_desc qxl_ioctls[];
extern int qxl_max_ioctl;
/*
* we are using a shadow draw buffer, at qdev->surface0_shadow
*/
- qxl_io_log(qdev, "dirty x[%d, %d], y[%d, %d]\n", clips->x1, clips->x2,
- clips->y1, clips->y2);
image->dx = clips->x1;
image->dy = clips->y1;
image->width = clips->x2 - clips->x1;
* to avoid endless loops).
*/
qdev->irq_received_error++;
- qxl_io_log(qdev, "%s: driver is in bug mode.\n", __func__);
+ DRM_WARN("driver is in bug mode\n");
}
if (pending & QXL_INTERRUPT_CLIENT_MONITORS_CONFIG) {
- qxl_io_log(qdev, "QXL_INTERRUPT_CLIENT_MONITORS_CONFIG\n");
schedule_work(&qdev->client_monitors_config_work);
}
qdev->ram_header->int_mask = QXL_INTERRUPT_MASK;
#define VOP_WIN_GET_YRGBADDR(vop, win) \
vop_readl(vop, win->base + win->phy->yrgb_mst.offset)
+#define VOP_WIN_TO_INDEX(vop_win) \
+ ((vop_win) - (vop_win)->vop->win)
+
#define to_vop(x) container_of(x, struct vop, crtc)
#define to_vop_win(x) container_of(x, struct vop_win, base)
dma_addr_t dma_addr;
uint32_t val;
bool rb_swap;
+ int win_index = VOP_WIN_TO_INDEX(vop_win);
int format;
/*
rb_swap = has_rb_swapped(fb->format->format);
VOP_WIN_SET(vop, win, rb_swap, rb_swap);
- if (fb->format->has_alpha) {
+ /*
+ * Blending win0 with the background color doesn't seem to work
+ * correctly. We only get the background color, no matter the contents
+ * of the win0 framebuffer. However, blending pre-multiplied color
+ * with the default opaque black default background color is a no-op,
+ * so we can just disable blending to get the correct result.
+ */
+ if (fb->format->has_alpha && win_index > 0) {
VOP_WIN_SET(vop, win, dst_alpha_ctl,
DST_FACTOR_M0(ALPHA_SRC_INVERSE));
val = SRC_ALPHA_EN(1) | SRC_COLOR_M0(ALPHA_SRC_PRE_MUL) |
-obj-$(CONFIG_DRM_DEBUG_MM_SELFTEST) += test-drm_mm.o
+obj-$(CONFIG_DRM_DEBUG_SELFTEST) += test-drm_mm.o test-drm-helper.o
--- /dev/null
+/* SPDX-License-Identifier: GPL-2.0 */
+/* List each unit test as selftest(name, function)
+ *
+ * The name is used as both an enum and expanded as igt__name to create
+ * a module parameter. It must be unique and legal for a C identifier.
+ *
+ * Tests are executed in order by igt/drm_selftests_helper
+ */
+selftest(check_plane_state, igt_check_plane_state)
--- /dev/null
+/*
+ * Test cases for the drm_kms_helper functions
+ */
+
+#define pr_fmt(fmt) "drm_kms_helper: " fmt
+
+#include <linux/module.h>
+
+#include <drm/drm_atomic_helper.h>
+#include <drm/drm_plane_helper.h>
+#include <drm/drm_modes.h>
+
+#define TESTS "drm_helper_selftests.h"
+#include "drm_selftest.h"
+
+#define FAIL(test, msg, ...) \
+ do { \
+ if (test) { \
+ pr_err("%s/%u: " msg, __FUNCTION__, __LINE__, ##__VA_ARGS__); \
+ return -EINVAL; \
+ } \
+ } while (0)
+
+#define FAIL_ON(x) FAIL((x), "%s", "FAIL_ON(" __stringify(x) ")\n")
+
+static void set_src(struct drm_plane_state *plane_state,
+ unsigned src_x, unsigned src_y,
+ unsigned src_w, unsigned src_h)
+{
+ plane_state->src_x = src_x;
+ plane_state->src_y = src_y;
+ plane_state->src_w = src_w;
+ plane_state->src_h = src_h;
+}
+
+static bool check_src_eq(struct drm_plane_state *plane_state,
+ unsigned src_x, unsigned src_y,
+ unsigned src_w, unsigned src_h)
+{
+ if (plane_state->src.x1 < 0) {
+ pr_err("src x coordinate %x should never be below 0.\n", plane_state->src.x1);
+ drm_rect_debug_print("src: ", &plane_state->src, true);
+ return false;
+ }
+ if (plane_state->src.y1 < 0) {
+ pr_err("src y coordinate %x should never be below 0.\n", plane_state->src.y1);
+ drm_rect_debug_print("src: ", &plane_state->src, true);
+ return false;
+ }
+
+ if (plane_state->src.x1 != src_x ||
+ plane_state->src.y1 != src_y ||
+ drm_rect_width(&plane_state->src) != src_w ||
+ drm_rect_height(&plane_state->src) != src_h) {
+ drm_rect_debug_print("src: ", &plane_state->src, true);
+ return false;
+ }
+
+ return true;
+}
+
+static void set_crtc(struct drm_plane_state *plane_state,
+ int crtc_x, int crtc_y,
+ unsigned crtc_w, unsigned crtc_h)
+{
+ plane_state->crtc_x = crtc_x;
+ plane_state->crtc_y = crtc_y;
+ plane_state->crtc_w = crtc_w;
+ plane_state->crtc_h = crtc_h;
+}
+
+static bool check_crtc_eq(struct drm_plane_state *plane_state,
+ int crtc_x, int crtc_y,
+ unsigned crtc_w, unsigned crtc_h)
+{
+ if (plane_state->dst.x1 != crtc_x ||
+ plane_state->dst.y1 != crtc_y ||
+ drm_rect_width(&plane_state->dst) != crtc_w ||
+ drm_rect_height(&plane_state->dst) != crtc_h) {
+ drm_rect_debug_print("dst: ", &plane_state->dst, false);
+
+ return false;
+ }
+
+ return true;
+}
+
+static int igt_check_plane_state(void *ignored)
+{
+ int ret;
+
+ const struct drm_crtc_state crtc_state = {
+ .crtc = ZERO_SIZE_PTR,
+ .enable = true,
+ .active = true,
+ .mode = {
+ DRM_MODE("1024x768", 0, 65000, 1024, 1048,
+ 1184, 1344, 0, 768, 771, 777, 806, 0,
+ DRM_MODE_FLAG_NHSYNC | DRM_MODE_FLAG_NVSYNC)
+ },
+ };
+ struct drm_framebuffer fb = {
+ .width = 2048,
+ .height = 2048
+ };
+ struct drm_plane_state plane_state = {
+ .crtc = ZERO_SIZE_PTR,
+ .fb = &fb,
+ .rotation = DRM_MODE_ROTATE_0
+ };
+
+ /* Simple clipping, no scaling. */
+ set_src(&plane_state, 0, 0, fb.width << 16, fb.height << 16);
+ set_crtc(&plane_state, 0, 0, fb.width, fb.height);
+ ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state,
+ DRM_PLANE_HELPER_NO_SCALING,
+ DRM_PLANE_HELPER_NO_SCALING,
+ false, false);
+ FAIL(ret < 0, "Simple clipping check should pass\n");
+ FAIL_ON(!plane_state.visible);
+ FAIL_ON(!check_src_eq(&plane_state, 0, 0, 1024 << 16, 768 << 16));
+ FAIL_ON(!check_crtc_eq(&plane_state, 0, 0, 1024, 768));
+
+ /* Rotated clipping + reflection, no scaling. */
+ plane_state.rotation = DRM_MODE_ROTATE_90 | DRM_MODE_REFLECT_X;
+ ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state,
+ DRM_PLANE_HELPER_NO_SCALING,
+ DRM_PLANE_HELPER_NO_SCALING,
+ false, false);
+ FAIL(ret < 0, "Rotated clipping check should pass\n");
+ FAIL_ON(!plane_state.visible);
+ FAIL_ON(!check_src_eq(&plane_state, 0, 0, 768 << 16, 1024 << 16));
+ FAIL_ON(!check_crtc_eq(&plane_state, 0, 0, 1024, 768));
+ plane_state.rotation = DRM_MODE_ROTATE_0;
+
+ /* Check whether positioning works correctly. */
+ set_src(&plane_state, 0, 0, 1023 << 16, 767 << 16);
+ set_crtc(&plane_state, 0, 0, 1023, 767);
+ ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state,
+ DRM_PLANE_HELPER_NO_SCALING,
+ DRM_PLANE_HELPER_NO_SCALING,
+ false, false);
+ FAIL(!ret, "Should not be able to position on the crtc with can_position=false\n");
+
+ ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state,
+ DRM_PLANE_HELPER_NO_SCALING,
+ DRM_PLANE_HELPER_NO_SCALING,
+ true, false);
+ FAIL(ret < 0, "Simple positioning should work\n");
+ FAIL_ON(!plane_state.visible);
+ FAIL_ON(!check_src_eq(&plane_state, 0, 0, 1023 << 16, 767 << 16));
+ FAIL_ON(!check_crtc_eq(&plane_state, 0, 0, 1023, 767));
+
+ /* Simple scaling tests. */
+ set_src(&plane_state, 0, 0, 512 << 16, 384 << 16);
+ set_crtc(&plane_state, 0, 0, 1024, 768);
+ ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state,
+ 0x8001,
+ DRM_PLANE_HELPER_NO_SCALING,
+ false, false);
+ FAIL(!ret, "Upscaling out of range should fail.\n");
+ ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state,
+ 0x8000,
+ DRM_PLANE_HELPER_NO_SCALING,
+ false, false);
+ FAIL(ret < 0, "Upscaling exactly 2x should work\n");
+ FAIL_ON(!plane_state.visible);
+ FAIL_ON(!check_src_eq(&plane_state, 0, 0, 512 << 16, 384 << 16));
+ FAIL_ON(!check_crtc_eq(&plane_state, 0, 0, 1024, 768));
+
+ set_src(&plane_state, 0, 0, 2048 << 16, 1536 << 16);
+ ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state,
+ DRM_PLANE_HELPER_NO_SCALING,
+ 0x1ffff, false, false);
+ FAIL(!ret, "Downscaling out of range should fail.\n");
+ ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state,
+ DRM_PLANE_HELPER_NO_SCALING,
+ 0x20000, false, false);
+ FAIL(ret < 0, "Should succeed with exact scaling limit\n");
+ FAIL_ON(!plane_state.visible);
+ FAIL_ON(!check_src_eq(&plane_state, 0, 0, 2048 << 16, 1536 << 16));
+ FAIL_ON(!check_crtc_eq(&plane_state, 0, 0, 1024, 768));
+
+ /* Testing rounding errors. */
+ set_src(&plane_state, 0, 0, 0x40001, 0x40001);
+ set_crtc(&plane_state, 1022, 766, 4, 4);
+ ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state,
+ DRM_PLANE_HELPER_NO_SCALING,
+ 0x10001,
+ true, false);
+ FAIL(ret < 0, "Should succeed by clipping to exact multiple");
+ FAIL_ON(!plane_state.visible);
+ FAIL_ON(!check_src_eq(&plane_state, 0, 0, 2 << 16, 2 << 16));
+ FAIL_ON(!check_crtc_eq(&plane_state, 1022, 766, 2, 2));
+
+ set_src(&plane_state, 0x20001, 0x20001, 0x4040001, 0x3040001);
+ set_crtc(&plane_state, -2, -2, 1028, 772);
+ ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state,
+ DRM_PLANE_HELPER_NO_SCALING,
+ 0x10001,
+ false, false);
+ FAIL(ret < 0, "Should succeed by clipping to exact multiple");
+ FAIL_ON(!plane_state.visible);
+ FAIL_ON(!check_src_eq(&plane_state, 0x40002, 0x40002, 1024 << 16, 768 << 16));
+ FAIL_ON(!check_crtc_eq(&plane_state, 0, 0, 1024, 768));
+
+ set_src(&plane_state, 0, 0, 0x3ffff, 0x3ffff);
+ set_crtc(&plane_state, 1022, 766, 4, 4);
+ ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state,
+ 0xffff,
+ DRM_PLANE_HELPER_NO_SCALING,
+ true, false);
+ FAIL(ret < 0, "Should succeed by clipping to exact multiple");
+ FAIL_ON(!plane_state.visible);
+ /* Should not be rounded to 0x20001, which would be upscaling. */
+ FAIL_ON(!check_src_eq(&plane_state, 0, 0, 2 << 16, 2 << 16));
+ FAIL_ON(!check_crtc_eq(&plane_state, 1022, 766, 2, 2));
+
+ set_src(&plane_state, 0x1ffff, 0x1ffff, 0x403ffff, 0x303ffff);
+ set_crtc(&plane_state, -2, -2, 1028, 772);
+ ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state,
+ 0xffff,
+ DRM_PLANE_HELPER_NO_SCALING,
+ false, false);
+ FAIL(ret < 0, "Should succeed by clipping to exact multiple");
+ FAIL_ON(!plane_state.visible);
+ FAIL_ON(!check_src_eq(&plane_state, 0x3fffe, 0x3fffe, 1024 << 16, 768 << 16));
+ FAIL_ON(!check_crtc_eq(&plane_state, 0, 0, 1024, 768));
+
+ return 0;
+}
+
+#include "drm_selftest.c"
+
+static int __init test_drm_helper_init(void)
+{
+ int err;
+
+ err = run_selftests(selftests, ARRAY_SIZE(selftests), NULL);
+
+ return err > 0 ? 0 : err;
+}
+
+module_init(test_drm_helper_init);
+
+MODULE_AUTHOR("Intel Corporation");
+MODULE_LICENSE("GPL");
res = drm_crtc_init_with_planes(drm_dev, crtc, primary, cursor,
&sti_crtc_funcs, NULL);
if (res) {
- DRM_ERROR("Can't initialze CRTC\n");
+ DRM_ERROR("Can't initialize CRTC\n");
return -EINVAL;
}
reg_set(ldev->regs, LTDC_SRCR, SRCR_IMR);
}
+#define CLK_TOLERANCE_HZ 50
+
+static enum drm_mode_status
+ltdc_crtc_mode_valid(struct drm_crtc *crtc,
+ const struct drm_display_mode *mode)
+{
+ struct ltdc_device *ldev = crtc_to_ltdc(crtc);
+ int target = mode->clock * 1000;
+ int target_min = target - CLK_TOLERANCE_HZ;
+ int target_max = target + CLK_TOLERANCE_HZ;
+ int result;
+
+ /*
+ * Accept all "preferred" modes:
+ * - this is important for panels because panel clock tolerances are
+ * bigger than hdmi ones and there is no reason to not accept them
+ * (the fps may vary a little but it is not a problem).
+ * - the hdmi preferred mode will be accepted too, but userland will
+ * be able to use others hdmi "valid" modes if necessary.
+ */
+ if (mode->type & DRM_MODE_TYPE_PREFERRED)
+ return MODE_OK;
+
+ result = clk_round_rate(ldev->pixel_clk, target);
+
+ DRM_DEBUG_DRIVER("clk rate target %d, available %d\n", target, result);
+
+ /*
+ * Filter modes according to the clock value, particularly useful for
+ * hdmi modes that require precise pixel clocks.
+ */
+ if (result < target_min || result > target_max)
+ return MODE_CLOCK_RANGE;
+
+ return MODE_OK;
+}
+
static bool ltdc_crtc_mode_fixup(struct drm_crtc *crtc,
const struct drm_display_mode *mode,
struct drm_display_mode *adjusted_mode)
}
static const struct drm_crtc_helper_funcs ltdc_crtc_helper_funcs = {
+ .mode_valid = ltdc_crtc_mode_valid,
.mode_fixup = ltdc_crtc_mode_fixup,
.mode_set_nofb = ltdc_crtc_mode_set_nofb,
.atomic_flush = ltdc_crtc_atomic_flush,
plane = devm_kzalloc(dev, sizeof(*plane), GFP_KERNEL);
if (!plane)
- return 0;
+ return NULL;
ret = drm_universal_plane_init(ddev, plane, possible_crtcs,
<dc_plane_funcs, formats, nb_fmt,
NULL, type, NULL);
if (ret < 0)
- return 0;
+ return NULL;
drm_plane_helper_add(plane, <dc_plane_helper_funcs);
&bridge[i]);
/*
- * If at least one endpoint is ready, continue probing,
- * else if at least one endpoint is -EPROBE_DEFER and
- * there is no previous ready endpoints, defer probing.
+ * If at least one endpoint is -EPROBE_DEFER, defer probing,
+ * else if at least one endpoint is ready, continue probing.
*/
- if (!ret)
+ if (ret == -EPROBE_DEFER)
+ return ret;
+ else if (!ret)
endpoint_not_ready = 0;
- else if (ret == -EPROBE_DEFER && endpoint_not_ready)
- endpoint_not_ready = -EPROBE_DEFER;
}
if (endpoint_not_ready)
/* Memory Access Control */
mipi_dbi_command(mipi, MIPI_DCS_SET_PIXEL_FORMAT, MIPI_DCS_PIXEL_FMT_16BIT);
- switch (mipi->rotation) {
- default:
- addr_mode = ILI9341_MADCTL_MV | ILI9341_MADCTL_MY |
- ILI9341_MADCTL_MX;
- break;
- case 90:
- addr_mode = ILI9341_MADCTL_MY;
- break;
- case 180:
- addr_mode = ILI9341_MADCTL_MV;
- break;
- case 270:
- addr_mode = ILI9341_MADCTL_MX;
- break;
- }
- addr_mode |= ILI9341_MADCTL_BGR;
- mipi_dbi_command(mipi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode);
-
/* Frame Rate */
mipi_dbi_command(mipi, ILI9341_FRMCTR1, 0x00, 0x1b);
msleep(100);
out_enable:
+ /* The PiTFT (ili9340) has a hardware reset circuit that
+ * resets only on power-on and not on each reboot through
+ * a gpio like the rpi-display does.
+ * As a result, we need to always apply the rotation value
+ * regardless of the display "on/off" state.
+ */
+ switch (mipi->rotation) {
+ default:
+ addr_mode = ILI9341_MADCTL_MV | ILI9341_MADCTL_MY |
+ ILI9341_MADCTL_MX;
+ break;
+ case 90:
+ addr_mode = ILI9341_MADCTL_MY;
+ break;
+ case 180:
+ addr_mode = ILI9341_MADCTL_MV;
+ break;
+ case 270:
+ addr_mode = ILI9341_MADCTL_MX;
+ break;
+ }
+ addr_mode |= ILI9341_MADCTL_BGR;
+ mipi_dbi_command(mipi, MIPI_DCS_SET_ADDRESS_MODE, addr_mode);
mipi_dbi_enable_flush(mipi, crtc_state, plane_state);
}
--- /dev/null
+config DRM_V3D
+ tristate "Broadcom V3D 3.x and newer"
+ depends on ARCH_BCM || ARCH_BCMSTB || COMPILE_TEST
+ depends on DRM
+ depends on COMMON_CLK
+ select DRM_SCHED
+ help
+ Choose this option if you have a system that has a Broadcom
+ V3D 3.x or newer GPU, such as BCM7268.
--- /dev/null
+# Please keep these build lists sorted!
+
+# core driver code
+v3d-y := \
+ v3d_bo.o \
+ v3d_drv.o \
+ v3d_fence.o \
+ v3d_gem.o \
+ v3d_irq.o \
+ v3d_mmu.o \
+ v3d_trace_points.o \
+ v3d_sched.o
+
+v3d-$(CONFIG_DEBUG_FS) += v3d_debugfs.o
+
+obj-$(CONFIG_DRM_V3D) += v3d.o
+
+CFLAGS_v3d_trace_points.o := -I$(src)
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (C) 2015-2018 Broadcom */
+
+/**
+ * DOC: V3D GEM BO management support
+ *
+ * Compared to VC4 (V3D 2.x), V3D 3.3 introduces an MMU between the
+ * GPU and the bus, allowing us to use shmem objects for our storage
+ * instead of CMA.
+ *
+ * Physically contiguous objects may still be imported to V3D, but the
+ * driver doesn't allocate physically contiguous objects on its own.
+ * Display engines requiring physically contiguous allocations should
+ * look into Mesa's "renderonly" support (as used by the Mesa pl111
+ * driver) for an example of how to integrate with V3D.
+ *
+ * Long term, we should support evicting pages from the MMU when under
+ * memory pressure (thus the v3d_bo_get_pages() refcounting), but
+ * that's not a high priority since our systems tend to not have swap.
+ */
+
+#include <linux/dma-buf.h>
+#include <linux/pfn_t.h>
+
+#include "v3d_drv.h"
+#include "uapi/drm/v3d_drm.h"
+
+/* Pins the shmem pages, fills in the .pages and .sgt fields of the BO, and maps
+ * it for DMA.
+ */
+static int
+v3d_bo_get_pages(struct v3d_bo *bo)
+{
+ struct drm_gem_object *obj = &bo->base;
+ struct drm_device *dev = obj->dev;
+ int npages = obj->size >> PAGE_SHIFT;
+ int ret = 0;
+
+ mutex_lock(&bo->lock);
+ if (bo->pages_refcount++ != 0)
+ goto unlock;
+
+ if (!obj->import_attach) {
+ bo->pages = drm_gem_get_pages(obj);
+ if (IS_ERR(bo->pages)) {
+ ret = PTR_ERR(bo->pages);
+ goto unlock;
+ }
+
+ bo->sgt = drm_prime_pages_to_sg(bo->pages, npages);
+ if (IS_ERR(bo->sgt)) {
+ ret = PTR_ERR(bo->sgt);
+ goto put_pages;
+ }
+
+ /* Map the pages for use by the GPU. */
+ dma_map_sg(dev->dev, bo->sgt->sgl,
+ bo->sgt->nents, DMA_BIDIRECTIONAL);
+ } else {
+ bo->pages = kcalloc(npages, sizeof(*bo->pages), GFP_KERNEL);
+ if (!bo->pages)
+ goto put_pages;
+
+ drm_prime_sg_to_page_addr_arrays(bo->sgt, bo->pages,
+ NULL, npages);
+
+ /* Note that dma-bufs come in mapped. */
+ }
+
+ mutex_unlock(&bo->lock);
+
+ return 0;
+
+put_pages:
+ drm_gem_put_pages(obj, bo->pages, true, true);
+ bo->pages = NULL;
+unlock:
+ bo->pages_refcount--;
+ mutex_unlock(&bo->lock);
+ return ret;
+}
+
+static void
+v3d_bo_put_pages(struct v3d_bo *bo)
+{
+ struct drm_gem_object *obj = &bo->base;
+
+ mutex_lock(&bo->lock);
+ if (--bo->pages_refcount == 0) {
+ if (!obj->import_attach) {
+ dma_unmap_sg(obj->dev->dev, bo->sgt->sgl,
+ bo->sgt->nents, DMA_BIDIRECTIONAL);
+ sg_free_table(bo->sgt);
+ kfree(bo->sgt);
+ drm_gem_put_pages(obj, bo->pages, true, true);
+ } else {
+ kfree(bo->pages);
+ }
+ }
+ mutex_unlock(&bo->lock);
+}
+
+static struct v3d_bo *v3d_bo_create_struct(struct drm_device *dev,
+ size_t unaligned_size)
+{
+ struct v3d_dev *v3d = to_v3d_dev(dev);
+ struct drm_gem_object *obj;
+ struct v3d_bo *bo;
+ size_t size = roundup(unaligned_size, PAGE_SIZE);
+ int ret;
+
+ if (size == 0)
+ return ERR_PTR(-EINVAL);
+
+ bo = kzalloc(sizeof(*bo), GFP_KERNEL);
+ if (!bo)
+ return ERR_PTR(-ENOMEM);
+ obj = &bo->base;
+
+ INIT_LIST_HEAD(&bo->vmas);
+ INIT_LIST_HEAD(&bo->unref_head);
+ mutex_init(&bo->lock);
+
+ ret = drm_gem_object_init(dev, obj, size);
+ if (ret)
+ goto free_bo;
+
+ spin_lock(&v3d->mm_lock);
+ ret = drm_mm_insert_node_generic(&v3d->mm, &bo->node,
+ obj->size >> PAGE_SHIFT,
+ GMP_GRANULARITY >> PAGE_SHIFT, 0, 0);
+ spin_unlock(&v3d->mm_lock);
+ if (ret)
+ goto free_obj;
+
+ return bo;
+
+free_obj:
+ drm_gem_object_release(obj);
+free_bo:
+ kfree(bo);
+ return ERR_PTR(ret);
+}
+
+struct v3d_bo *v3d_bo_create(struct drm_device *dev, struct drm_file *file_priv,
+ size_t unaligned_size)
+{
+ struct v3d_dev *v3d = to_v3d_dev(dev);
+ struct drm_gem_object *obj;
+ struct v3d_bo *bo;
+ int ret;
+
+ bo = v3d_bo_create_struct(dev, unaligned_size);
+ if (IS_ERR(bo))
+ return bo;
+ obj = &bo->base;
+
+ bo->resv = &bo->_resv;
+ reservation_object_init(bo->resv);
+
+ ret = v3d_bo_get_pages(bo);
+ if (ret)
+ goto free_mm;
+
+ v3d_mmu_insert_ptes(bo);
+
+ mutex_lock(&v3d->bo_lock);
+ v3d->bo_stats.num_allocated++;
+ v3d->bo_stats.pages_allocated += obj->size >> PAGE_SHIFT;
+ mutex_unlock(&v3d->bo_lock);
+
+ return bo;
+
+free_mm:
+ spin_lock(&v3d->mm_lock);
+ drm_mm_remove_node(&bo->node);
+ spin_unlock(&v3d->mm_lock);
+
+ drm_gem_object_release(obj);
+ kfree(bo);
+ return ERR_PTR(ret);
+}
+
+/* Called DRM core on the last userspace/kernel unreference of the
+ * BO.
+ */
+void v3d_free_object(struct drm_gem_object *obj)
+{
+ struct v3d_dev *v3d = to_v3d_dev(obj->dev);
+ struct v3d_bo *bo = to_v3d_bo(obj);
+
+ mutex_lock(&v3d->bo_lock);
+ v3d->bo_stats.num_allocated--;
+ v3d->bo_stats.pages_allocated -= obj->size >> PAGE_SHIFT;
+ mutex_unlock(&v3d->bo_lock);
+
+ reservation_object_fini(&bo->_resv);
+
+ v3d_bo_put_pages(bo);
+
+ if (obj->import_attach)
+ drm_prime_gem_destroy(obj, bo->sgt);
+
+ v3d_mmu_remove_ptes(bo);
+ spin_lock(&v3d->mm_lock);
+ drm_mm_remove_node(&bo->node);
+ spin_unlock(&v3d->mm_lock);
+
+ mutex_destroy(&bo->lock);
+
+ drm_gem_object_release(obj);
+ kfree(bo);
+}
+
+struct reservation_object *v3d_prime_res_obj(struct drm_gem_object *obj)
+{
+ struct v3d_bo *bo = to_v3d_bo(obj);
+
+ return bo->resv;
+}
+
+static void
+v3d_set_mmap_vma_flags(struct vm_area_struct *vma)
+{
+ vma->vm_flags &= ~VM_PFNMAP;
+ vma->vm_flags |= VM_MIXEDMAP;
+ vma->vm_page_prot = pgprot_writecombine(vm_get_page_prot(vma->vm_flags));
+}
+
+int v3d_gem_fault(struct vm_fault *vmf)
+{
+ struct vm_area_struct *vma = vmf->vma;
+ struct drm_gem_object *obj = vma->vm_private_data;
+ struct v3d_bo *bo = to_v3d_bo(obj);
+ unsigned long pfn;
+ pgoff_t pgoff;
+ int ret;
+
+ /* We don't use vmf->pgoff since that has the fake offset: */
+ pgoff = (vmf->address - vma->vm_start) >> PAGE_SHIFT;
+ pfn = page_to_pfn(bo->pages[pgoff]);
+
+ ret = vm_insert_mixed(vma, vmf->address, __pfn_to_pfn_t(pfn, PFN_DEV));
+
+ switch (ret) {
+ case -EAGAIN:
+ case 0:
+ case -ERESTARTSYS:
+ case -EINTR:
+ case -EBUSY:
+ /*
+ * EBUSY is ok: this just means that another thread
+ * already did the job.
+ */
+ return VM_FAULT_NOPAGE;
+ case -ENOMEM:
+ return VM_FAULT_OOM;
+ default:
+ return VM_FAULT_SIGBUS;
+ }
+}
+
+int v3d_mmap(struct file *filp, struct vm_area_struct *vma)
+{
+ int ret;
+
+ ret = drm_gem_mmap(filp, vma);
+ if (ret)
+ return ret;
+
+ v3d_set_mmap_vma_flags(vma);
+
+ return ret;
+}
+
+int v3d_prime_mmap(struct drm_gem_object *obj, struct vm_area_struct *vma)
+{
+ int ret;
+
+ ret = drm_gem_mmap_obj(obj, obj->size, vma);
+ if (ret < 0)
+ return ret;
+
+ v3d_set_mmap_vma_flags(vma);
+
+ return 0;
+}
+
+struct sg_table *
+v3d_prime_get_sg_table(struct drm_gem_object *obj)
+{
+ struct v3d_bo *bo = to_v3d_bo(obj);
+ int npages = obj->size >> PAGE_SHIFT;
+
+ return drm_prime_pages_to_sg(bo->pages, npages);
+}
+
+struct drm_gem_object *
+v3d_prime_import_sg_table(struct drm_device *dev,
+ struct dma_buf_attachment *attach,
+ struct sg_table *sgt)
+{
+ struct drm_gem_object *obj;
+ struct v3d_bo *bo;
+
+ bo = v3d_bo_create_struct(dev, attach->dmabuf->size);
+ if (IS_ERR(bo))
+ return ERR_CAST(bo);
+ obj = &bo->base;
+
+ bo->resv = attach->dmabuf->resv;
+
+ bo->sgt = sgt;
+ v3d_bo_get_pages(bo);
+
+ v3d_mmu_insert_ptes(bo);
+
+ return obj;
+}
+
+int v3d_create_bo_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_v3d_create_bo *args = data;
+ struct v3d_bo *bo = NULL;
+ int ret;
+
+ if (args->flags != 0) {
+ DRM_INFO("unknown create_bo flags: %d\n", args->flags);
+ return -EINVAL;
+ }
+
+ bo = v3d_bo_create(dev, file_priv, PAGE_ALIGN(args->size));
+ if (IS_ERR(bo))
+ return PTR_ERR(bo);
+
+ args->offset = bo->node.start << PAGE_SHIFT;
+
+ ret = drm_gem_handle_create(file_priv, &bo->base, &args->handle);
+ drm_gem_object_put_unlocked(&bo->base);
+
+ return ret;
+}
+
+int v3d_mmap_bo_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_v3d_mmap_bo *args = data;
+ struct drm_gem_object *gem_obj;
+ int ret;
+
+ if (args->flags != 0) {
+ DRM_INFO("unknown mmap_bo flags: %d\n", args->flags);
+ return -EINVAL;
+ }
+
+ gem_obj = drm_gem_object_lookup(file_priv, args->handle);
+ if (!gem_obj) {
+ DRM_DEBUG("Failed to look up GEM BO %d\n", args->handle);
+ return -ENOENT;
+ }
+
+ ret = drm_gem_create_mmap_offset(gem_obj);
+ if (ret == 0)
+ args->offset = drm_vma_node_offset_addr(&gem_obj->vma_node);
+ drm_gem_object_put_unlocked(gem_obj);
+
+ return ret;
+}
+
+int v3d_get_bo_offset_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_v3d_get_bo_offset *args = data;
+ struct drm_gem_object *gem_obj;
+ struct v3d_bo *bo;
+
+ gem_obj = drm_gem_object_lookup(file_priv, args->handle);
+ if (!gem_obj) {
+ DRM_DEBUG("Failed to look up GEM BO %d\n", args->handle);
+ return -ENOENT;
+ }
+ bo = to_v3d_bo(gem_obj);
+
+ args->offset = bo->node.start << PAGE_SHIFT;
+
+ drm_gem_object_put_unlocked(gem_obj);
+ return 0;
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (C) 2014-2018 Broadcom */
+
+#include <linux/circ_buf.h>
+#include <linux/ctype.h>
+#include <linux/debugfs.h>
+#include <linux/pm_runtime.h>
+#include <linux/seq_file.h>
+#include <drm/drmP.h>
+
+#include "v3d_drv.h"
+#include "v3d_regs.h"
+
+#define REGDEF(reg) { reg, #reg }
+struct v3d_reg_def {
+ u32 reg;
+ const char *name;
+};
+
+static const struct v3d_reg_def v3d_hub_reg_defs[] = {
+ REGDEF(V3D_HUB_AXICFG),
+ REGDEF(V3D_HUB_UIFCFG),
+ REGDEF(V3D_HUB_IDENT0),
+ REGDEF(V3D_HUB_IDENT1),
+ REGDEF(V3D_HUB_IDENT2),
+ REGDEF(V3D_HUB_IDENT3),
+ REGDEF(V3D_HUB_INT_STS),
+ REGDEF(V3D_HUB_INT_MSK_STS),
+};
+
+static const struct v3d_reg_def v3d_gca_reg_defs[] = {
+ REGDEF(V3D_GCA_SAFE_SHUTDOWN),
+ REGDEF(V3D_GCA_SAFE_SHUTDOWN_ACK),
+};
+
+static const struct v3d_reg_def v3d_core_reg_defs[] = {
+ REGDEF(V3D_CTL_IDENT0),
+ REGDEF(V3D_CTL_IDENT1),
+ REGDEF(V3D_CTL_IDENT2),
+ REGDEF(V3D_CTL_MISCCFG),
+ REGDEF(V3D_CTL_INT_STS),
+ REGDEF(V3D_CTL_INT_MSK_STS),
+ REGDEF(V3D_CLE_CT0CS),
+ REGDEF(V3D_CLE_CT0CA),
+ REGDEF(V3D_CLE_CT0EA),
+ REGDEF(V3D_CLE_CT1CS),
+ REGDEF(V3D_CLE_CT1CA),
+ REGDEF(V3D_CLE_CT1EA),
+
+ REGDEF(V3D_PTB_BPCA),
+ REGDEF(V3D_PTB_BPCS),
+
+ REGDEF(V3D_MMU_CTL),
+ REGDEF(V3D_MMU_VIO_ADDR),
+
+ REGDEF(V3D_GMP_STATUS),
+ REGDEF(V3D_GMP_CFG),
+ REGDEF(V3D_GMP_VIO_ADDR),
+};
+
+static int v3d_v3d_debugfs_regs(struct seq_file *m, void *unused)
+{
+ struct drm_info_node *node = (struct drm_info_node *)m->private;
+ struct drm_device *dev = node->minor->dev;
+ struct v3d_dev *v3d = to_v3d_dev(dev);
+ int i, core;
+
+ for (i = 0; i < ARRAY_SIZE(v3d_hub_reg_defs); i++) {
+ seq_printf(m, "%s (0x%04x): 0x%08x\n",
+ v3d_hub_reg_defs[i].name, v3d_hub_reg_defs[i].reg,
+ V3D_READ(v3d_hub_reg_defs[i].reg));
+ }
+
+ for (i = 0; i < ARRAY_SIZE(v3d_gca_reg_defs); i++) {
+ seq_printf(m, "%s (0x%04x): 0x%08x\n",
+ v3d_gca_reg_defs[i].name, v3d_gca_reg_defs[i].reg,
+ V3D_GCA_READ(v3d_gca_reg_defs[i].reg));
+ }
+
+ for (core = 0; core < v3d->cores; core++) {
+ for (i = 0; i < ARRAY_SIZE(v3d_core_reg_defs); i++) {
+ seq_printf(m, "core %d %s (0x%04x): 0x%08x\n",
+ core,
+ v3d_core_reg_defs[i].name,
+ v3d_core_reg_defs[i].reg,
+ V3D_CORE_READ(core,
+ v3d_core_reg_defs[i].reg));
+ }
+ }
+
+ return 0;
+}
+
+static int v3d_v3d_debugfs_ident(struct seq_file *m, void *unused)
+{
+ struct drm_info_node *node = (struct drm_info_node *)m->private;
+ struct drm_device *dev = node->minor->dev;
+ struct v3d_dev *v3d = to_v3d_dev(dev);
+ u32 ident0, ident1, ident2, ident3, cores;
+ int ret, core;
+
+ ret = pm_runtime_get_sync(v3d->dev);
+ if (ret < 0)
+ return ret;
+
+ ident0 = V3D_READ(V3D_HUB_IDENT0);
+ ident1 = V3D_READ(V3D_HUB_IDENT1);
+ ident2 = V3D_READ(V3D_HUB_IDENT2);
+ ident3 = V3D_READ(V3D_HUB_IDENT3);
+ cores = V3D_GET_FIELD(ident1, V3D_HUB_IDENT1_NCORES);
+
+ seq_printf(m, "Revision: %d.%d.%d.%d\n",
+ V3D_GET_FIELD(ident1, V3D_HUB_IDENT1_TVER),
+ V3D_GET_FIELD(ident1, V3D_HUB_IDENT1_REV),
+ V3D_GET_FIELD(ident3, V3D_HUB_IDENT3_IPREV),
+ V3D_GET_FIELD(ident3, V3D_HUB_IDENT3_IPIDX));
+ seq_printf(m, "MMU: %s\n",
+ (ident2 & V3D_HUB_IDENT2_WITH_MMU) ? "yes" : "no");
+ seq_printf(m, "TFU: %s\n",
+ (ident1 & V3D_HUB_IDENT1_WITH_TFU) ? "yes" : "no");
+ seq_printf(m, "TSY: %s\n",
+ (ident1 & V3D_HUB_IDENT1_WITH_TSY) ? "yes" : "no");
+ seq_printf(m, "MSO: %s\n",
+ (ident1 & V3D_HUB_IDENT1_WITH_MSO) ? "yes" : "no");
+ seq_printf(m, "L3C: %s (%dkb)\n",
+ (ident1 & V3D_HUB_IDENT1_WITH_L3C) ? "yes" : "no",
+ V3D_GET_FIELD(ident2, V3D_HUB_IDENT2_L3C_NKB));
+
+ for (core = 0; core < cores; core++) {
+ u32 misccfg;
+ u32 nslc, ntmu, qups;
+
+ ident0 = V3D_CORE_READ(core, V3D_CTL_IDENT0);
+ ident1 = V3D_CORE_READ(core, V3D_CTL_IDENT1);
+ ident2 = V3D_CORE_READ(core, V3D_CTL_IDENT2);
+ misccfg = V3D_CORE_READ(core, V3D_CTL_MISCCFG);
+
+ nslc = V3D_GET_FIELD(ident1, V3D_IDENT1_NSLC);
+ ntmu = V3D_GET_FIELD(ident1, V3D_IDENT1_NTMU);
+ qups = V3D_GET_FIELD(ident1, V3D_IDENT1_QUPS);
+
+ seq_printf(m, "Core %d:\n", core);
+ seq_printf(m, " Revision: %d.%d\n",
+ V3D_GET_FIELD(ident0, V3D_IDENT0_VER),
+ V3D_GET_FIELD(ident1, V3D_IDENT1_REV));
+ seq_printf(m, " Slices: %d\n", nslc);
+ seq_printf(m, " TMUs: %d\n", nslc * ntmu);
+ seq_printf(m, " QPUs: %d\n", nslc * qups);
+ seq_printf(m, " Semaphores: %d\n",
+ V3D_GET_FIELD(ident1, V3D_IDENT1_NSEM));
+ seq_printf(m, " BCG int: %d\n",
+ (ident2 & V3D_IDENT2_BCG_INT) != 0);
+ seq_printf(m, " Override TMU: %d\n",
+ (misccfg & V3D_MISCCFG_OVRTMUOUT) != 0);
+ }
+
+ pm_runtime_mark_last_busy(v3d->dev);
+ pm_runtime_put_autosuspend(v3d->dev);
+
+ return 0;
+}
+
+static int v3d_debugfs_bo_stats(struct seq_file *m, void *unused)
+{
+ struct drm_info_node *node = (struct drm_info_node *)m->private;
+ struct drm_device *dev = node->minor->dev;
+ struct v3d_dev *v3d = to_v3d_dev(dev);
+
+ mutex_lock(&v3d->bo_lock);
+ seq_printf(m, "allocated bos: %d\n",
+ v3d->bo_stats.num_allocated);
+ seq_printf(m, "allocated bo size (kb): %ld\n",
+ (long)v3d->bo_stats.pages_allocated << (PAGE_SHIFT - 10));
+ mutex_unlock(&v3d->bo_lock);
+
+ return 0;
+}
+
+static const struct drm_info_list v3d_debugfs_list[] = {
+ {"v3d_ident", v3d_v3d_debugfs_ident, 0},
+ {"v3d_regs", v3d_v3d_debugfs_regs, 0},
+ {"bo_stats", v3d_debugfs_bo_stats, 0},
+};
+
+int
+v3d_debugfs_init(struct drm_minor *minor)
+{
+ return drm_debugfs_create_files(v3d_debugfs_list,
+ ARRAY_SIZE(v3d_debugfs_list),
+ minor->debugfs_root, minor);
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (C) 2014-2018 Broadcom */
+
+/**
+ * DOC: Broadcom V3D Graphics Driver
+ *
+ * This driver supports the Broadcom V3D 3.3 and 4.1 OpenGL ES GPUs.
+ * For V3D 2.x support, see the VC4 driver.
+ *
+ * Currently only single-core rendering using the binner and renderer
+ * is supported. The TFU (texture formatting unit) and V3D 4.x's CSD
+ * (compute shader dispatch) are not yet supported.
+ */
+
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_fb_helper.h>
+
+#include "uapi/drm/v3d_drm.h"
+#include "v3d_drv.h"
+#include "v3d_regs.h"
+
+#define DRIVER_NAME "v3d"
+#define DRIVER_DESC "Broadcom V3D graphics"
+#define DRIVER_DATE "20180419"
+#define DRIVER_MAJOR 1
+#define DRIVER_MINOR 0
+#define DRIVER_PATCHLEVEL 0
+
+#ifdef CONFIG_PM
+static int v3d_runtime_suspend(struct device *dev)
+{
+ struct drm_device *drm = dev_get_drvdata(dev);
+ struct v3d_dev *v3d = to_v3d_dev(drm);
+
+ v3d_irq_disable(v3d);
+
+ clk_disable_unprepare(v3d->clk);
+
+ return 0;
+}
+
+static int v3d_runtime_resume(struct device *dev)
+{
+ struct drm_device *drm = dev_get_drvdata(dev);
+ struct v3d_dev *v3d = to_v3d_dev(drm);
+ int ret;
+
+ ret = clk_prepare_enable(v3d->clk);
+ if (ret != 0)
+ return ret;
+
+ /* XXX: VPM base */
+
+ v3d_mmu_set_page_table(v3d);
+ v3d_irq_enable(v3d);
+
+ return 0;
+}
+#endif
+
+static const struct dev_pm_ops v3d_v3d_pm_ops = {
+ SET_RUNTIME_PM_OPS(v3d_runtime_suspend, v3d_runtime_resume, NULL)
+};
+
+static int v3d_get_param_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct v3d_dev *v3d = to_v3d_dev(dev);
+ struct drm_v3d_get_param *args = data;
+ int ret;
+ static const u32 reg_map[] = {
+ [DRM_V3D_PARAM_V3D_UIFCFG] = V3D_HUB_UIFCFG,
+ [DRM_V3D_PARAM_V3D_HUB_IDENT1] = V3D_HUB_IDENT1,
+ [DRM_V3D_PARAM_V3D_HUB_IDENT2] = V3D_HUB_IDENT2,
+ [DRM_V3D_PARAM_V3D_HUB_IDENT3] = V3D_HUB_IDENT3,
+ [DRM_V3D_PARAM_V3D_CORE0_IDENT0] = V3D_CTL_IDENT0,
+ [DRM_V3D_PARAM_V3D_CORE0_IDENT1] = V3D_CTL_IDENT1,
+ [DRM_V3D_PARAM_V3D_CORE0_IDENT2] = V3D_CTL_IDENT2,
+ };
+
+ if (args->pad != 0)
+ return -EINVAL;
+
+ /* Note that DRM_V3D_PARAM_V3D_CORE0_IDENT0 is 0, so we need
+ * to explicitly allow it in the "the register in our
+ * parameter map" check.
+ */
+ if (args->param < ARRAY_SIZE(reg_map) &&
+ (reg_map[args->param] ||
+ args->param == DRM_V3D_PARAM_V3D_CORE0_IDENT0)) {
+ u32 offset = reg_map[args->param];
+
+ if (args->value != 0)
+ return -EINVAL;
+
+ ret = pm_runtime_get_sync(v3d->dev);
+ if (args->param >= DRM_V3D_PARAM_V3D_CORE0_IDENT0 &&
+ args->param <= DRM_V3D_PARAM_V3D_CORE0_IDENT2) {
+ args->value = V3D_CORE_READ(0, offset);
+ } else {
+ args->value = V3D_READ(offset);
+ }
+ pm_runtime_mark_last_busy(v3d->dev);
+ pm_runtime_put_autosuspend(v3d->dev);
+ return 0;
+ }
+
+ /* Any params that aren't just register reads would go here. */
+
+ DRM_DEBUG("Unknown parameter %d\n", args->param);
+ return -EINVAL;
+}
+
+static int
+v3d_open(struct drm_device *dev, struct drm_file *file)
+{
+ struct v3d_dev *v3d = to_v3d_dev(dev);
+ struct v3d_file_priv *v3d_priv;
+ int i;
+
+ v3d_priv = kzalloc(sizeof(*v3d_priv), GFP_KERNEL);
+ if (!v3d_priv)
+ return -ENOMEM;
+
+ v3d_priv->v3d = v3d;
+
+ for (i = 0; i < V3D_MAX_QUEUES; i++) {
+ drm_sched_entity_init(&v3d->queue[i].sched,
+ &v3d_priv->sched_entity[i],
+ &v3d->queue[i].sched.sched_rq[DRM_SCHED_PRIORITY_NORMAL],
+ 32, NULL);
+ }
+
+ file->driver_priv = v3d_priv;
+
+ return 0;
+}
+
+static void
+v3d_postclose(struct drm_device *dev, struct drm_file *file)
+{
+ struct v3d_dev *v3d = to_v3d_dev(dev);
+ struct v3d_file_priv *v3d_priv = file->driver_priv;
+ enum v3d_queue q;
+
+ for (q = 0; q < V3D_MAX_QUEUES; q++) {
+ drm_sched_entity_fini(&v3d->queue[q].sched,
+ &v3d_priv->sched_entity[q]);
+ }
+
+ kfree(v3d_priv);
+}
+
+static const struct file_operations v3d_drm_fops = {
+ .owner = THIS_MODULE,
+ .open = drm_open,
+ .release = drm_release,
+ .unlocked_ioctl = drm_ioctl,
+ .mmap = v3d_mmap,
+ .poll = drm_poll,
+ .read = drm_read,
+ .compat_ioctl = drm_compat_ioctl,
+ .llseek = noop_llseek,
+};
+
+/* DRM_AUTH is required on SUBMIT_CL for now, while we don't have GMP
+ * protection between clients. Note that render nodes would be be
+ * able to submit CLs that could access BOs from clients authenticated
+ * with the master node.
+ */
+static const struct drm_ioctl_desc v3d_drm_ioctls[] = {
+ DRM_IOCTL_DEF_DRV(V3D_SUBMIT_CL, v3d_submit_cl_ioctl, DRM_RENDER_ALLOW | DRM_AUTH),
+ DRM_IOCTL_DEF_DRV(V3D_WAIT_BO, v3d_wait_bo_ioctl, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(V3D_CREATE_BO, v3d_create_bo_ioctl, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(V3D_MMAP_BO, v3d_mmap_bo_ioctl, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(V3D_GET_PARAM, v3d_get_param_ioctl, DRM_RENDER_ALLOW),
+ DRM_IOCTL_DEF_DRV(V3D_GET_BO_OFFSET, v3d_get_bo_offset_ioctl, DRM_RENDER_ALLOW),
+};
+
+static const struct vm_operations_struct v3d_vm_ops = {
+ .fault = v3d_gem_fault,
+ .open = drm_gem_vm_open,
+ .close = drm_gem_vm_close,
+};
+
+static struct drm_driver v3d_drm_driver = {
+ .driver_features = (DRIVER_GEM |
+ DRIVER_RENDER |
+ DRIVER_PRIME |
+ DRIVER_SYNCOBJ),
+
+ .open = v3d_open,
+ .postclose = v3d_postclose,
+
+#if defined(CONFIG_DEBUG_FS)
+ .debugfs_init = v3d_debugfs_init,
+#endif
+
+ .gem_free_object_unlocked = v3d_free_object,
+ .gem_vm_ops = &v3d_vm_ops,
+
+ .prime_handle_to_fd = drm_gem_prime_handle_to_fd,
+ .prime_fd_to_handle = drm_gem_prime_fd_to_handle,
+ .gem_prime_import = drm_gem_prime_import,
+ .gem_prime_export = drm_gem_prime_export,
+ .gem_prime_res_obj = v3d_prime_res_obj,
+ .gem_prime_get_sg_table = v3d_prime_get_sg_table,
+ .gem_prime_import_sg_table = v3d_prime_import_sg_table,
+ .gem_prime_mmap = v3d_prime_mmap,
+
+ .ioctls = v3d_drm_ioctls,
+ .num_ioctls = ARRAY_SIZE(v3d_drm_ioctls),
+ .fops = &v3d_drm_fops,
+
+ .name = DRIVER_NAME,
+ .desc = DRIVER_DESC,
+ .date = DRIVER_DATE,
+ .major = DRIVER_MAJOR,
+ .minor = DRIVER_MINOR,
+ .patchlevel = DRIVER_PATCHLEVEL,
+};
+
+static const struct of_device_id v3d_of_match[] = {
+ { .compatible = "brcm,7268-v3d" },
+ { .compatible = "brcm,7278-v3d" },
+ {},
+};
+MODULE_DEVICE_TABLE(of, v3d_of_match);
+
+static int
+map_regs(struct v3d_dev *v3d, void __iomem **regs, const char *name)
+{
+ struct resource *res =
+ platform_get_resource_byname(v3d->pdev, IORESOURCE_MEM, name);
+
+ *regs = devm_ioremap_resource(v3d->dev, res);
+ return PTR_ERR_OR_ZERO(*regs);
+}
+
+static int v3d_platform_drm_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct drm_device *drm;
+ struct v3d_dev *v3d;
+ int ret;
+ u32 ident1;
+
+ dev->coherent_dma_mask = DMA_BIT_MASK(36);
+
+ v3d = kzalloc(sizeof(*v3d), GFP_KERNEL);
+ if (!v3d)
+ return -ENOMEM;
+ v3d->dev = dev;
+ v3d->pdev = pdev;
+ drm = &v3d->drm;
+
+ ret = map_regs(v3d, &v3d->bridge_regs, "bridge");
+ if (ret)
+ goto dev_free;
+
+ ret = map_regs(v3d, &v3d->hub_regs, "hub");
+ if (ret)
+ goto dev_free;
+
+ ret = map_regs(v3d, &v3d->core_regs[0], "core0");
+ if (ret)
+ goto dev_free;
+
+ ident1 = V3D_READ(V3D_HUB_IDENT1);
+ v3d->ver = (V3D_GET_FIELD(ident1, V3D_HUB_IDENT1_TVER) * 10 +
+ V3D_GET_FIELD(ident1, V3D_HUB_IDENT1_REV));
+ v3d->cores = V3D_GET_FIELD(ident1, V3D_HUB_IDENT1_NCORES);
+ WARN_ON(v3d->cores > 1); /* multicore not yet implemented */
+
+ if (v3d->ver < 41) {
+ ret = map_regs(v3d, &v3d->gca_regs, "gca");
+ if (ret)
+ goto dev_free;
+ }
+
+ v3d->mmu_scratch = dma_alloc_wc(dev, 4096, &v3d->mmu_scratch_paddr,
+ GFP_KERNEL | __GFP_NOWARN | __GFP_ZERO);
+ if (!v3d->mmu_scratch) {
+ dev_err(dev, "Failed to allocate MMU scratch page\n");
+ ret = -ENOMEM;
+ goto dev_free;
+ }
+
+ pm_runtime_use_autosuspend(dev);
+ pm_runtime_set_autosuspend_delay(dev, 50);
+ pm_runtime_enable(dev);
+
+ ret = drm_dev_init(&v3d->drm, &v3d_drm_driver, dev);
+ if (ret)
+ goto dma_free;
+
+ platform_set_drvdata(pdev, drm);
+ drm->dev_private = v3d;
+
+ ret = v3d_gem_init(drm);
+ if (ret)
+ goto dev_destroy;
+
+ v3d_irq_init(v3d);
+
+ ret = drm_dev_register(drm, 0);
+ if (ret)
+ goto gem_destroy;
+
+ return 0;
+
+gem_destroy:
+ v3d_gem_destroy(drm);
+dev_destroy:
+ drm_dev_put(drm);
+dma_free:
+ dma_free_wc(dev, 4096, v3d->mmu_scratch, v3d->mmu_scratch_paddr);
+dev_free:
+ kfree(v3d);
+ return ret;
+}
+
+static int v3d_platform_drm_remove(struct platform_device *pdev)
+{
+ struct drm_device *drm = platform_get_drvdata(pdev);
+ struct v3d_dev *v3d = to_v3d_dev(drm);
+
+ drm_dev_unregister(drm);
+
+ v3d_gem_destroy(drm);
+
+ drm_dev_put(drm);
+
+ dma_free_wc(v3d->dev, 4096, v3d->mmu_scratch, v3d->mmu_scratch_paddr);
+
+ return 0;
+}
+
+static struct platform_driver v3d_platform_driver = {
+ .probe = v3d_platform_drm_probe,
+ .remove = v3d_platform_drm_remove,
+ .driver = {
+ .name = "v3d",
+ .of_match_table = v3d_of_match,
+ },
+};
+
+static int __init v3d_drm_register(void)
+{
+ return platform_driver_register(&v3d_platform_driver);
+}
+
+static void __exit v3d_drm_unregister(void)
+{
+ platform_driver_unregister(&v3d_platform_driver);
+}
+
+module_init(v3d_drm_register);
+module_exit(v3d_drm_unregister);
+
+MODULE_ALIAS("platform:v3d-drm");
+MODULE_DESCRIPTION("Broadcom V3D DRM Driver");
+MODULE_AUTHOR("Eric Anholt <eric@anholt.net>");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (C) 2015-2018 Broadcom */
+
+#include <linux/reservation.h>
+#include <drm/drmP.h>
+#include <drm/drm_encoder.h>
+#include <drm/drm_gem.h>
+#include <drm/gpu_scheduler.h>
+
+#define GMP_GRANULARITY (128 * 1024)
+
+/* Enum for each of the V3D queues. We maintain various queue
+ * tracking as an array because at some point we'll want to support
+ * the TFU (texture formatting unit) as another queue.
+ */
+enum v3d_queue {
+ V3D_BIN,
+ V3D_RENDER,
+};
+
+#define V3D_MAX_QUEUES (V3D_RENDER + 1)
+
+struct v3d_queue_state {
+ struct drm_gpu_scheduler sched;
+
+ u64 fence_context;
+ u64 emit_seqno;
+ u64 finished_seqno;
+};
+
+struct v3d_dev {
+ struct drm_device drm;
+
+ /* Short representation (e.g. 33, 41) of the V3D tech version
+ * and revision.
+ */
+ int ver;
+
+ struct device *dev;
+ struct platform_device *pdev;
+ void __iomem *hub_regs;
+ void __iomem *core_regs[3];
+ void __iomem *bridge_regs;
+ void __iomem *gca_regs;
+ struct clk *clk;
+
+ /* Virtual and DMA addresses of the single shared page table. */
+ volatile u32 *pt;
+ dma_addr_t pt_paddr;
+
+ /* Virtual and DMA addresses of the MMU's scratch page. When
+ * a read or write is invalid in the MMU, it will be
+ * redirected here.
+ */
+ void *mmu_scratch;
+ dma_addr_t mmu_scratch_paddr;
+
+ /* Number of V3D cores. */
+ u32 cores;
+
+ /* Allocator managing the address space. All units are in
+ * number of pages.
+ */
+ struct drm_mm mm;
+ spinlock_t mm_lock;
+
+ struct work_struct overflow_mem_work;
+
+ struct v3d_exec_info *bin_job;
+ struct v3d_exec_info *render_job;
+
+ struct v3d_queue_state queue[V3D_MAX_QUEUES];
+
+ /* Spinlock used to synchronize the overflow memory
+ * management against bin job submission.
+ */
+ spinlock_t job_lock;
+
+ /* Protects bo_stats */
+ struct mutex bo_lock;
+
+ /* Lock taken when resetting the GPU, to keep multiple
+ * processes from trying to park the scheduler threads and
+ * reset at once.
+ */
+ struct mutex reset_lock;
+
+ struct {
+ u32 num_allocated;
+ u32 pages_allocated;
+ } bo_stats;
+};
+
+static inline struct v3d_dev *
+to_v3d_dev(struct drm_device *dev)
+{
+ return (struct v3d_dev *)dev->dev_private;
+}
+
+/* The per-fd struct, which tracks the MMU mappings. */
+struct v3d_file_priv {
+ struct v3d_dev *v3d;
+
+ struct drm_sched_entity sched_entity[V3D_MAX_QUEUES];
+};
+
+/* Tracks a mapping of a BO into a per-fd address space */
+struct v3d_vma {
+ struct v3d_page_table *pt;
+ struct list_head list; /* entry in v3d_bo.vmas */
+};
+
+struct v3d_bo {
+ struct drm_gem_object base;
+
+ struct mutex lock;
+
+ struct drm_mm_node node;
+
+ u32 pages_refcount;
+ struct page **pages;
+ struct sg_table *sgt;
+ void *vaddr;
+
+ struct list_head vmas; /* list of v3d_vma */
+
+ /* List entry for the BO's position in
+ * v3d_exec_info->unref_list
+ */
+ struct list_head unref_head;
+
+ /* normally (resv == &_resv) except for imported bo's */
+ struct reservation_object *resv;
+ struct reservation_object _resv;
+};
+
+static inline struct v3d_bo *
+to_v3d_bo(struct drm_gem_object *bo)
+{
+ return (struct v3d_bo *)bo;
+}
+
+struct v3d_fence {
+ struct dma_fence base;
+ struct drm_device *dev;
+ /* v3d seqno for signaled() test */
+ u64 seqno;
+ enum v3d_queue queue;
+};
+
+static inline struct v3d_fence *
+to_v3d_fence(struct dma_fence *fence)
+{
+ return (struct v3d_fence *)fence;
+}
+
+#define V3D_READ(offset) readl(v3d->hub_regs + offset)
+#define V3D_WRITE(offset, val) writel(val, v3d->hub_regs + offset)
+
+#define V3D_BRIDGE_READ(offset) readl(v3d->bridge_regs + offset)
+#define V3D_BRIDGE_WRITE(offset, val) writel(val, v3d->bridge_regs + offset)
+
+#define V3D_GCA_READ(offset) readl(v3d->gca_regs + offset)
+#define V3D_GCA_WRITE(offset, val) writel(val, v3d->gca_regs + offset)
+
+#define V3D_CORE_READ(core, offset) readl(v3d->core_regs[core] + offset)
+#define V3D_CORE_WRITE(core, offset, val) writel(val, v3d->core_regs[core] + offset)
+
+struct v3d_job {
+ struct drm_sched_job base;
+
+ struct v3d_exec_info *exec;
+
+ /* An optional fence userspace can pass in for the job to depend on. */
+ struct dma_fence *in_fence;
+
+ /* v3d fence to be signaled by IRQ handler when the job is complete. */
+ struct dma_fence *done_fence;
+
+ /* GPU virtual addresses of the start/end of the CL job. */
+ u32 start, end;
+};
+
+struct v3d_exec_info {
+ struct v3d_dev *v3d;
+
+ struct v3d_job bin, render;
+
+ /* Fence for when the scheduler considers the binner to be
+ * done, for render to depend on.
+ */
+ struct dma_fence *bin_done_fence;
+
+ struct kref refcount;
+
+ /* This is the array of BOs that were looked up at the start of exec. */
+ struct v3d_bo **bo;
+ u32 bo_count;
+
+ /* List of overflow BOs used in the job that need to be
+ * released once the job is complete.
+ */
+ struct list_head unref_list;
+
+ /* Submitted tile memory allocation start/size, tile state. */
+ u32 qma, qms, qts;
+};
+
+/**
+ * _wait_for - magic (register) wait macro
+ *
+ * Does the right thing for modeset paths when run under kdgb or similar atomic
+ * contexts. Note that it's important that we check the condition again after
+ * having timed out, since the timeout could be due to preemption or similar and
+ * we've never had a chance to check the condition before the timeout.
+ */
+#define wait_for(COND, MS) ({ \
+ unsigned long timeout__ = jiffies + msecs_to_jiffies(MS) + 1; \
+ int ret__ = 0; \
+ while (!(COND)) { \
+ if (time_after(jiffies, timeout__)) { \
+ if (!(COND)) \
+ ret__ = -ETIMEDOUT; \
+ break; \
+ } \
+ msleep(1); \
+ } \
+ ret__; \
+})
+
+static inline unsigned long nsecs_to_jiffies_timeout(const u64 n)
+{
+ /* nsecs_to_jiffies64() does not guard against overflow */
+ if (NSEC_PER_SEC % HZ &&
+ div_u64(n, NSEC_PER_SEC) >= MAX_JIFFY_OFFSET / HZ)
+ return MAX_JIFFY_OFFSET;
+
+ return min_t(u64, MAX_JIFFY_OFFSET, nsecs_to_jiffies64(n) + 1);
+}
+
+/* v3d_bo.c */
+void v3d_free_object(struct drm_gem_object *gem_obj);
+struct v3d_bo *v3d_bo_create(struct drm_device *dev, struct drm_file *file_priv,
+ size_t size);
+int v3d_create_bo_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+int v3d_mmap_bo_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+int v3d_get_bo_offset_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+int v3d_gem_fault(struct vm_fault *vmf);
+int v3d_mmap(struct file *filp, struct vm_area_struct *vma);
+struct reservation_object *v3d_prime_res_obj(struct drm_gem_object *obj);
+int v3d_prime_mmap(struct drm_gem_object *obj, struct vm_area_struct *vma);
+struct sg_table *v3d_prime_get_sg_table(struct drm_gem_object *obj);
+struct drm_gem_object *v3d_prime_import_sg_table(struct drm_device *dev,
+ struct dma_buf_attachment *attach,
+ struct sg_table *sgt);
+
+/* v3d_debugfs.c */
+int v3d_debugfs_init(struct drm_minor *minor);
+
+/* v3d_fence.c */
+extern const struct dma_fence_ops v3d_fence_ops;
+struct dma_fence *v3d_fence_create(struct v3d_dev *v3d, enum v3d_queue queue);
+
+/* v3d_gem.c */
+int v3d_gem_init(struct drm_device *dev);
+void v3d_gem_destroy(struct drm_device *dev);
+int v3d_submit_cl_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+int v3d_wait_bo_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
+void v3d_exec_put(struct v3d_exec_info *exec);
+void v3d_reset(struct v3d_dev *v3d);
+void v3d_invalidate_caches(struct v3d_dev *v3d);
+void v3d_flush_caches(struct v3d_dev *v3d);
+
+/* v3d_irq.c */
+void v3d_irq_init(struct v3d_dev *v3d);
+void v3d_irq_enable(struct v3d_dev *v3d);
+void v3d_irq_disable(struct v3d_dev *v3d);
+void v3d_irq_reset(struct v3d_dev *v3d);
+
+/* v3d_mmu.c */
+int v3d_mmu_get_offset(struct drm_file *file_priv, struct v3d_bo *bo,
+ u32 *offset);
+int v3d_mmu_set_page_table(struct v3d_dev *v3d);
+void v3d_mmu_insert_ptes(struct v3d_bo *bo);
+void v3d_mmu_remove_ptes(struct v3d_bo *bo);
+
+/* v3d_sched.c */
+int v3d_sched_init(struct v3d_dev *v3d);
+void v3d_sched_fini(struct v3d_dev *v3d);
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (C) 2017-2018 Broadcom */
+
+#include "v3d_drv.h"
+
+struct dma_fence *v3d_fence_create(struct v3d_dev *v3d, enum v3d_queue queue)
+{
+ struct v3d_fence *fence;
+
+ fence = kzalloc(sizeof(*fence), GFP_KERNEL);
+ if (!fence)
+ return ERR_PTR(-ENOMEM);
+
+ fence->dev = &v3d->drm;
+ fence->queue = queue;
+ fence->seqno = ++v3d->queue[queue].emit_seqno;
+ dma_fence_init(&fence->base, &v3d_fence_ops, &v3d->job_lock,
+ v3d->queue[queue].fence_context, fence->seqno);
+
+ return &fence->base;
+}
+
+static const char *v3d_fence_get_driver_name(struct dma_fence *fence)
+{
+ return "v3d";
+}
+
+static const char *v3d_fence_get_timeline_name(struct dma_fence *fence)
+{
+ struct v3d_fence *f = to_v3d_fence(fence);
+
+ if (f->queue == V3D_BIN)
+ return "v3d-bin";
+ else
+ return "v3d-render";
+}
+
+static bool v3d_fence_enable_signaling(struct dma_fence *fence)
+{
+ return true;
+}
+
+static bool v3d_fence_signaled(struct dma_fence *fence)
+{
+ struct v3d_fence *f = to_v3d_fence(fence);
+ struct v3d_dev *v3d = to_v3d_dev(f->dev);
+
+ return v3d->queue[f->queue].finished_seqno >= f->seqno;
+}
+
+const struct dma_fence_ops v3d_fence_ops = {
+ .get_driver_name = v3d_fence_get_driver_name,
+ .get_timeline_name = v3d_fence_get_timeline_name,
+ .enable_signaling = v3d_fence_enable_signaling,
+ .signaled = v3d_fence_signaled,
+ .wait = dma_fence_default_wait,
+ .release = dma_fence_free,
+};
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (C) 2014-2018 Broadcom */
+
+#include <drm/drmP.h>
+#include <drm/drm_syncobj.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/sched/signal.h>
+
+#include "uapi/drm/v3d_drm.h"
+#include "v3d_drv.h"
+#include "v3d_regs.h"
+#include "v3d_trace.h"
+
+static void
+v3d_init_core(struct v3d_dev *v3d, int core)
+{
+ /* Set OVRTMUOUT, which means that the texture sampler uniform
+ * configuration's tmu output type field is used, instead of
+ * using the hardware default behavior based on the texture
+ * type. If you want the default behavior, you can still put
+ * "2" in the indirect texture state's output_type field.
+ */
+ V3D_CORE_WRITE(core, V3D_CTL_MISCCFG, V3D_MISCCFG_OVRTMUOUT);
+
+ /* Whenever we flush the L2T cache, we always want to flush
+ * the whole thing.
+ */
+ V3D_CORE_WRITE(core, V3D_CTL_L2TFLSTA, 0);
+ V3D_CORE_WRITE(core, V3D_CTL_L2TFLEND, ~0);
+}
+
+/* Sets invariant state for the HW. */
+static void
+v3d_init_hw_state(struct v3d_dev *v3d)
+{
+ v3d_init_core(v3d, 0);
+}
+
+static void
+v3d_idle_axi(struct v3d_dev *v3d, int core)
+{
+ V3D_CORE_WRITE(core, V3D_GMP_CFG, V3D_GMP_CFG_STOP_REQ);
+
+ if (wait_for((V3D_CORE_READ(core, V3D_GMP_STATUS) &
+ (V3D_GMP_STATUS_RD_COUNT_MASK |
+ V3D_GMP_STATUS_WR_COUNT_MASK |
+ V3D_GMP_STATUS_CFG_BUSY)) == 0, 100)) {
+ DRM_ERROR("Failed to wait for safe GMP shutdown\n");
+ }
+}
+
+static void
+v3d_idle_gca(struct v3d_dev *v3d)
+{
+ if (v3d->ver >= 41)
+ return;
+
+ V3D_GCA_WRITE(V3D_GCA_SAFE_SHUTDOWN, V3D_GCA_SAFE_SHUTDOWN_EN);
+
+ if (wait_for((V3D_GCA_READ(V3D_GCA_SAFE_SHUTDOWN_ACK) &
+ V3D_GCA_SAFE_SHUTDOWN_ACK_ACKED) ==
+ V3D_GCA_SAFE_SHUTDOWN_ACK_ACKED, 100)) {
+ DRM_ERROR("Failed to wait for safe GCA shutdown\n");
+ }
+}
+
+static void
+v3d_reset_v3d(struct v3d_dev *v3d)
+{
+ int version = V3D_BRIDGE_READ(V3D_TOP_GR_BRIDGE_REVISION);
+
+ if (V3D_GET_FIELD(version, V3D_TOP_GR_BRIDGE_MAJOR) == 2) {
+ V3D_BRIDGE_WRITE(V3D_TOP_GR_BRIDGE_SW_INIT_0,
+ V3D_TOP_GR_BRIDGE_SW_INIT_0_V3D_CLK_108_SW_INIT);
+ V3D_BRIDGE_WRITE(V3D_TOP_GR_BRIDGE_SW_INIT_0, 0);
+
+ /* GFXH-1383: The SW_INIT may cause a stray write to address 0
+ * of the unit, so reset it to its power-on value here.
+ */
+ V3D_WRITE(V3D_HUB_AXICFG, V3D_HUB_AXICFG_MAX_LEN_MASK);
+ } else {
+ WARN_ON_ONCE(V3D_GET_FIELD(version,
+ V3D_TOP_GR_BRIDGE_MAJOR) != 7);
+ V3D_BRIDGE_WRITE(V3D_TOP_GR_BRIDGE_SW_INIT_1,
+ V3D_TOP_GR_BRIDGE_SW_INIT_1_V3D_CLK_108_SW_INIT);
+ V3D_BRIDGE_WRITE(V3D_TOP_GR_BRIDGE_SW_INIT_1, 0);
+ }
+
+ v3d_init_hw_state(v3d);
+}
+
+void
+v3d_reset(struct v3d_dev *v3d)
+{
+ struct drm_device *dev = &v3d->drm;
+
+ DRM_ERROR("Resetting GPU.\n");
+ trace_v3d_reset_begin(dev);
+
+ /* XXX: only needed for safe powerdown, not reset. */
+ if (false)
+ v3d_idle_axi(v3d, 0);
+
+ v3d_idle_gca(v3d);
+ v3d_reset_v3d(v3d);
+
+ v3d_mmu_set_page_table(v3d);
+ v3d_irq_reset(v3d);
+
+ trace_v3d_reset_end(dev);
+}
+
+static void
+v3d_flush_l3(struct v3d_dev *v3d)
+{
+ if (v3d->ver < 41) {
+ u32 gca_ctrl = V3D_GCA_READ(V3D_GCA_CACHE_CTRL);
+
+ V3D_GCA_WRITE(V3D_GCA_CACHE_CTRL,
+ gca_ctrl | V3D_GCA_CACHE_CTRL_FLUSH);
+
+ if (v3d->ver < 33) {
+ V3D_GCA_WRITE(V3D_GCA_CACHE_CTRL,
+ gca_ctrl & ~V3D_GCA_CACHE_CTRL_FLUSH);
+ }
+ }
+}
+
+/* Invalidates the (read-only) L2 cache. */
+static void
+v3d_invalidate_l2(struct v3d_dev *v3d, int core)
+{
+ V3D_CORE_WRITE(core, V3D_CTL_L2CACTL,
+ V3D_L2CACTL_L2CCLR |
+ V3D_L2CACTL_L2CENA);
+}
+
+static void
+v3d_invalidate_l1td(struct v3d_dev *v3d, int core)
+{
+ V3D_CORE_WRITE(core, V3D_CTL_L2TCACTL, V3D_L2TCACTL_TMUWCF);
+ if (wait_for(!(V3D_CORE_READ(core, V3D_CTL_L2TCACTL) &
+ V3D_L2TCACTL_L2TFLS), 100)) {
+ DRM_ERROR("Timeout waiting for L1T write combiner flush\n");
+ }
+}
+
+/* Invalidates texture L2 cachelines */
+static void
+v3d_flush_l2t(struct v3d_dev *v3d, int core)
+{
+ v3d_invalidate_l1td(v3d, core);
+
+ V3D_CORE_WRITE(core, V3D_CTL_L2TCACTL,
+ V3D_L2TCACTL_L2TFLS |
+ V3D_SET_FIELD(V3D_L2TCACTL_FLM_FLUSH, V3D_L2TCACTL_FLM));
+ if (wait_for(!(V3D_CORE_READ(core, V3D_CTL_L2TCACTL) &
+ V3D_L2TCACTL_L2TFLS), 100)) {
+ DRM_ERROR("Timeout waiting for L2T flush\n");
+ }
+}
+
+/* Invalidates the slice caches. These are read-only caches. */
+static void
+v3d_invalidate_slices(struct v3d_dev *v3d, int core)
+{
+ V3D_CORE_WRITE(core, V3D_CTL_SLCACTL,
+ V3D_SET_FIELD(0xf, V3D_SLCACTL_TVCCS) |
+ V3D_SET_FIELD(0xf, V3D_SLCACTL_TDCCS) |
+ V3D_SET_FIELD(0xf, V3D_SLCACTL_UCC) |
+ V3D_SET_FIELD(0xf, V3D_SLCACTL_ICC));
+}
+
+/* Invalidates texture L2 cachelines */
+static void
+v3d_invalidate_l2t(struct v3d_dev *v3d, int core)
+{
+ V3D_CORE_WRITE(core,
+ V3D_CTL_L2TCACTL,
+ V3D_L2TCACTL_L2TFLS |
+ V3D_SET_FIELD(V3D_L2TCACTL_FLM_CLEAR, V3D_L2TCACTL_FLM));
+ if (wait_for(!(V3D_CORE_READ(core, V3D_CTL_L2TCACTL) &
+ V3D_L2TCACTL_L2TFLS), 100)) {
+ DRM_ERROR("Timeout waiting for L2T invalidate\n");
+ }
+}
+
+void
+v3d_invalidate_caches(struct v3d_dev *v3d)
+{
+ v3d_flush_l3(v3d);
+
+ v3d_invalidate_l2(v3d, 0);
+ v3d_invalidate_slices(v3d, 0);
+ v3d_flush_l2t(v3d, 0);
+}
+
+void
+v3d_flush_caches(struct v3d_dev *v3d)
+{
+ v3d_invalidate_l1td(v3d, 0);
+ v3d_invalidate_l2t(v3d, 0);
+}
+
+static void
+v3d_attach_object_fences(struct v3d_exec_info *exec)
+{
+ struct dma_fence *out_fence = &exec->render.base.s_fence->finished;
+ struct v3d_bo *bo;
+ int i;
+
+ for (i = 0; i < exec->bo_count; i++) {
+ bo = to_v3d_bo(&exec->bo[i]->base);
+
+ /* XXX: Use shared fences for read-only objects. */
+ reservation_object_add_excl_fence(bo->resv, out_fence);
+ }
+}
+
+static void
+v3d_unlock_bo_reservations(struct drm_device *dev,
+ struct v3d_exec_info *exec,
+ struct ww_acquire_ctx *acquire_ctx)
+{
+ int i;
+
+ for (i = 0; i < exec->bo_count; i++) {
+ struct v3d_bo *bo = to_v3d_bo(&exec->bo[i]->base);
+
+ ww_mutex_unlock(&bo->resv->lock);
+ }
+
+ ww_acquire_fini(acquire_ctx);
+}
+
+/* Takes the reservation lock on all the BOs being referenced, so that
+ * at queue submit time we can update the reservations.
+ *
+ * We don't lock the RCL the tile alloc/state BOs, or overflow memory
+ * (all of which are on exec->unref_list). They're entirely private
+ * to v3d, so we don't attach dma-buf fences to them.
+ */
+static int
+v3d_lock_bo_reservations(struct drm_device *dev,
+ struct v3d_exec_info *exec,
+ struct ww_acquire_ctx *acquire_ctx)
+{
+ int contended_lock = -1;
+ int i, ret;
+ struct v3d_bo *bo;
+
+ ww_acquire_init(acquire_ctx, &reservation_ww_class);
+
+retry:
+ if (contended_lock != -1) {
+ bo = to_v3d_bo(&exec->bo[contended_lock]->base);
+ ret = ww_mutex_lock_slow_interruptible(&bo->resv->lock,
+ acquire_ctx);
+ if (ret) {
+ ww_acquire_done(acquire_ctx);
+ return ret;
+ }
+ }
+
+ for (i = 0; i < exec->bo_count; i++) {
+ if (i == contended_lock)
+ continue;
+
+ bo = to_v3d_bo(&exec->bo[i]->base);
+
+ ret = ww_mutex_lock_interruptible(&bo->resv->lock, acquire_ctx);
+ if (ret) {
+ int j;
+
+ for (j = 0; j < i; j++) {
+ bo = to_v3d_bo(&exec->bo[j]->base);
+ ww_mutex_unlock(&bo->resv->lock);
+ }
+
+ if (contended_lock != -1 && contended_lock >= i) {
+ bo = to_v3d_bo(&exec->bo[contended_lock]->base);
+
+ ww_mutex_unlock(&bo->resv->lock);
+ }
+
+ if (ret == -EDEADLK) {
+ contended_lock = i;
+ goto retry;
+ }
+
+ ww_acquire_done(acquire_ctx);
+ return ret;
+ }
+ }
+
+ ww_acquire_done(acquire_ctx);
+
+ /* Reserve space for our shared (read-only) fence references,
+ * before we commit the CL to the hardware.
+ */
+ for (i = 0; i < exec->bo_count; i++) {
+ bo = to_v3d_bo(&exec->bo[i]->base);
+
+ ret = reservation_object_reserve_shared(bo->resv);
+ if (ret) {
+ v3d_unlock_bo_reservations(dev, exec, acquire_ctx);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+/**
+ * v3d_cl_lookup_bos() - Sets up exec->bo[] with the GEM objects
+ * referenced by the job.
+ * @dev: DRM device
+ * @file_priv: DRM file for this fd
+ * @exec: V3D job being set up
+ *
+ * The command validator needs to reference BOs by their index within
+ * the submitted job's BO list. This does the validation of the job's
+ * BO list and reference counting for the lifetime of the job.
+ *
+ * Note that this function doesn't need to unreference the BOs on
+ * failure, because that will happen at v3d_exec_cleanup() time.
+ */
+static int
+v3d_cl_lookup_bos(struct drm_device *dev,
+ struct drm_file *file_priv,
+ struct drm_v3d_submit_cl *args,
+ struct v3d_exec_info *exec)
+{
+ u32 *handles;
+ int ret = 0;
+ int i;
+
+ exec->bo_count = args->bo_handle_count;
+
+ if (!exec->bo_count) {
+ /* See comment on bo_index for why we have to check
+ * this.
+ */
+ DRM_DEBUG("Rendering requires BOs\n");
+ return -EINVAL;
+ }
+
+ exec->bo = kvmalloc_array(exec->bo_count,
+ sizeof(struct drm_gem_cma_object *),
+ GFP_KERNEL | __GFP_ZERO);
+ if (!exec->bo) {
+ DRM_DEBUG("Failed to allocate validated BO pointers\n");
+ return -ENOMEM;
+ }
+
+ handles = kvmalloc_array(exec->bo_count, sizeof(u32), GFP_KERNEL);
+ if (!handles) {
+ ret = -ENOMEM;
+ DRM_DEBUG("Failed to allocate incoming GEM handles\n");
+ goto fail;
+ }
+
+ if (copy_from_user(handles,
+ (void __user *)(uintptr_t)args->bo_handles,
+ exec->bo_count * sizeof(u32))) {
+ ret = -EFAULT;
+ DRM_DEBUG("Failed to copy in GEM handles\n");
+ goto fail;
+ }
+
+ spin_lock(&file_priv->table_lock);
+ for (i = 0; i < exec->bo_count; i++) {
+ struct drm_gem_object *bo = idr_find(&file_priv->object_idr,
+ handles[i]);
+ if (!bo) {
+ DRM_DEBUG("Failed to look up GEM BO %d: %d\n",
+ i, handles[i]);
+ ret = -ENOENT;
+ spin_unlock(&file_priv->table_lock);
+ goto fail;
+ }
+ drm_gem_object_get(bo);
+ exec->bo[i] = to_v3d_bo(bo);
+ }
+ spin_unlock(&file_priv->table_lock);
+
+fail:
+ kvfree(handles);
+ return ret;
+}
+
+static void
+v3d_exec_cleanup(struct kref *ref)
+{
+ struct v3d_exec_info *exec = container_of(ref, struct v3d_exec_info,
+ refcount);
+ struct v3d_dev *v3d = exec->v3d;
+ unsigned int i;
+ struct v3d_bo *bo, *save;
+
+ dma_fence_put(exec->bin.in_fence);
+ dma_fence_put(exec->render.in_fence);
+
+ dma_fence_put(exec->bin.done_fence);
+ dma_fence_put(exec->render.done_fence);
+
+ dma_fence_put(exec->bin_done_fence);
+
+ for (i = 0; i < exec->bo_count; i++)
+ drm_gem_object_put_unlocked(&exec->bo[i]->base);
+ kvfree(exec->bo);
+
+ list_for_each_entry_safe(bo, save, &exec->unref_list, unref_head) {
+ drm_gem_object_put_unlocked(&bo->base);
+ }
+
+ pm_runtime_mark_last_busy(v3d->dev);
+ pm_runtime_put_autosuspend(v3d->dev);
+
+ kfree(exec);
+}
+
+void v3d_exec_put(struct v3d_exec_info *exec)
+{
+ kref_put(&exec->refcount, v3d_exec_cleanup);
+}
+
+int
+v3d_wait_bo_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ int ret;
+ struct drm_v3d_wait_bo *args = data;
+ struct drm_gem_object *gem_obj;
+ struct v3d_bo *bo;
+ ktime_t start = ktime_get();
+ u64 delta_ns;
+ unsigned long timeout_jiffies =
+ nsecs_to_jiffies_timeout(args->timeout_ns);
+
+ if (args->pad != 0)
+ return -EINVAL;
+
+ gem_obj = drm_gem_object_lookup(file_priv, args->handle);
+ if (!gem_obj) {
+ DRM_DEBUG("Failed to look up GEM BO %d\n", args->handle);
+ return -EINVAL;
+ }
+ bo = to_v3d_bo(gem_obj);
+
+ ret = reservation_object_wait_timeout_rcu(bo->resv,
+ true, true,
+ timeout_jiffies);
+
+ if (ret == 0)
+ ret = -ETIME;
+ else if (ret > 0)
+ ret = 0;
+
+ /* Decrement the user's timeout, in case we got interrupted
+ * such that the ioctl will be restarted.
+ */
+ delta_ns = ktime_to_ns(ktime_sub(ktime_get(), start));
+ if (delta_ns < args->timeout_ns)
+ args->timeout_ns -= delta_ns;
+ else
+ args->timeout_ns = 0;
+
+ /* Asked to wait beyond the jiffie/scheduler precision? */
+ if (ret == -ETIME && args->timeout_ns)
+ ret = -EAGAIN;
+
+ drm_gem_object_put_unlocked(gem_obj);
+
+ return ret;
+}
+
+/**
+ * v3d_submit_cl_ioctl() - Submits a job (frame) to the V3D.
+ * @dev: DRM device
+ * @data: ioctl argument
+ * @file_priv: DRM file for this fd
+ *
+ * This is the main entrypoint for userspace to submit a 3D frame to
+ * the GPU. Userspace provides the binner command list (if
+ * applicable), and the kernel sets up the render command list to draw
+ * to the framebuffer described in the ioctl, using the command lists
+ * that the 3D engine's binner will produce.
+ */
+int
+v3d_submit_cl_ioctl(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct v3d_dev *v3d = to_v3d_dev(dev);
+ struct v3d_file_priv *v3d_priv = file_priv->driver_priv;
+ struct drm_v3d_submit_cl *args = data;
+ struct v3d_exec_info *exec;
+ struct ww_acquire_ctx acquire_ctx;
+ struct drm_syncobj *sync_out;
+ int ret = 0;
+
+ if (args->pad != 0) {
+ DRM_INFO("pad must be zero: %d\n", args->pad);
+ return -EINVAL;
+ }
+
+ exec = kcalloc(1, sizeof(*exec), GFP_KERNEL);
+ if (!exec)
+ return -ENOMEM;
+
+ ret = pm_runtime_get_sync(v3d->dev);
+ if (ret < 0) {
+ kfree(exec);
+ return ret;
+ }
+
+ kref_init(&exec->refcount);
+
+ ret = drm_syncobj_find_fence(file_priv, args->in_sync_bcl,
+ &exec->bin.in_fence);
+ if (ret == -EINVAL)
+ goto fail;
+
+ ret = drm_syncobj_find_fence(file_priv, args->in_sync_rcl,
+ &exec->render.in_fence);
+ if (ret == -EINVAL)
+ goto fail;
+
+ exec->qma = args->qma;
+ exec->qms = args->qms;
+ exec->qts = args->qts;
+ exec->bin.exec = exec;
+ exec->bin.start = args->bcl_start;
+ exec->bin.end = args->bcl_end;
+ exec->render.exec = exec;
+ exec->render.start = args->rcl_start;
+ exec->render.end = args->rcl_end;
+ exec->v3d = v3d;
+ INIT_LIST_HEAD(&exec->unref_list);
+
+ ret = v3d_cl_lookup_bos(dev, file_priv, args, exec);
+ if (ret)
+ goto fail;
+
+ ret = v3d_lock_bo_reservations(dev, exec, &acquire_ctx);
+ if (ret)
+ goto fail;
+
+ if (exec->bin.start != exec->bin.end) {
+ ret = drm_sched_job_init(&exec->bin.base,
+ &v3d->queue[V3D_BIN].sched,
+ &v3d_priv->sched_entity[V3D_BIN],
+ v3d_priv);
+ if (ret)
+ goto fail_unreserve;
+
+ exec->bin_done_fence =
+ dma_fence_get(&exec->bin.base.s_fence->finished);
+
+ kref_get(&exec->refcount); /* put by scheduler job completion */
+ drm_sched_entity_push_job(&exec->bin.base,
+ &v3d_priv->sched_entity[V3D_BIN]);
+ }
+
+ ret = drm_sched_job_init(&exec->render.base,
+ &v3d->queue[V3D_RENDER].sched,
+ &v3d_priv->sched_entity[V3D_RENDER],
+ v3d_priv);
+ if (ret)
+ goto fail_unreserve;
+
+ kref_get(&exec->refcount); /* put by scheduler job completion */
+ drm_sched_entity_push_job(&exec->render.base,
+ &v3d_priv->sched_entity[V3D_RENDER]);
+
+ v3d_attach_object_fences(exec);
+
+ v3d_unlock_bo_reservations(dev, exec, &acquire_ctx);
+
+ /* Update the return sync object for the */
+ sync_out = drm_syncobj_find(file_priv, args->out_sync);
+ if (sync_out) {
+ drm_syncobj_replace_fence(sync_out,
+ &exec->render.base.s_fence->finished);
+ drm_syncobj_put(sync_out);
+ }
+
+ v3d_exec_put(exec);
+
+ return 0;
+
+fail_unreserve:
+ v3d_unlock_bo_reservations(dev, exec, &acquire_ctx);
+fail:
+ v3d_exec_put(exec);
+
+ return ret;
+}
+
+int
+v3d_gem_init(struct drm_device *dev)
+{
+ struct v3d_dev *v3d = to_v3d_dev(dev);
+ u32 pt_size = 4096 * 1024;
+ int ret, i;
+
+ for (i = 0; i < V3D_MAX_QUEUES; i++)
+ v3d->queue[i].fence_context = dma_fence_context_alloc(1);
+
+ spin_lock_init(&v3d->mm_lock);
+ spin_lock_init(&v3d->job_lock);
+ mutex_init(&v3d->bo_lock);
+ mutex_init(&v3d->reset_lock);
+
+ /* Note: We don't allocate address 0. Various bits of HW
+ * treat 0 as special, such as the occlusion query counters
+ * where 0 means "disabled".
+ */
+ drm_mm_init(&v3d->mm, 1, pt_size / sizeof(u32) - 1);
+
+ v3d->pt = dma_alloc_wc(v3d->dev, pt_size,
+ &v3d->pt_paddr,
+ GFP_KERNEL | __GFP_NOWARN | __GFP_ZERO);
+ if (!v3d->pt) {
+ drm_mm_takedown(&v3d->mm);
+ dev_err(v3d->dev,
+ "Failed to allocate page tables. "
+ "Please ensure you have CMA enabled.\n");
+ return -ENOMEM;
+ }
+
+ v3d_init_hw_state(v3d);
+ v3d_mmu_set_page_table(v3d);
+
+ ret = v3d_sched_init(v3d);
+ if (ret) {
+ drm_mm_takedown(&v3d->mm);
+ dma_free_coherent(v3d->dev, 4096 * 1024, (void *)v3d->pt,
+ v3d->pt_paddr);
+ }
+
+ return 0;
+}
+
+void
+v3d_gem_destroy(struct drm_device *dev)
+{
+ struct v3d_dev *v3d = to_v3d_dev(dev);
+ enum v3d_queue q;
+
+ v3d_sched_fini(v3d);
+
+ /* Waiting for exec to finish would need to be done before
+ * unregistering V3D.
+ */
+ for (q = 0; q < V3D_MAX_QUEUES; q++) {
+ WARN_ON(v3d->queue[q].emit_seqno !=
+ v3d->queue[q].finished_seqno);
+ }
+
+ drm_mm_takedown(&v3d->mm);
+
+ dma_free_coherent(v3d->dev, 4096 * 1024, (void *)v3d->pt, v3d->pt_paddr);
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (C) 2014-2018 Broadcom */
+
+/**
+ * DOC: Interrupt management for the V3D engine
+ *
+ * When we take a binning or rendering flush done interrupt, we need
+ * to signal the fence for that job so that the scheduler can queue up
+ * the next one and unblock any waiters.
+ *
+ * When we take the binner out of memory interrupt, we need to
+ * allocate some new memory and pass it to the binner so that the
+ * current job can make progress.
+ */
+
+#include "v3d_drv.h"
+#include "v3d_regs.h"
+
+#define V3D_CORE_IRQS ((u32)(V3D_INT_OUTOMEM | \
+ V3D_INT_FLDONE | \
+ V3D_INT_FRDONE | \
+ V3D_INT_GMPV))
+
+#define V3D_HUB_IRQS ((u32)(V3D_HUB_INT_MMU_WRV | \
+ V3D_HUB_INT_MMU_PTI | \
+ V3D_HUB_INT_MMU_CAP))
+
+static void
+v3d_overflow_mem_work(struct work_struct *work)
+{
+ struct v3d_dev *v3d =
+ container_of(work, struct v3d_dev, overflow_mem_work);
+ struct drm_device *dev = &v3d->drm;
+ struct v3d_bo *bo = v3d_bo_create(dev, NULL /* XXX: GMP */, 256 * 1024);
+ unsigned long irqflags;
+
+ if (IS_ERR(bo)) {
+ DRM_ERROR("Couldn't allocate binner overflow mem\n");
+ return;
+ }
+
+ /* We lost a race, and our work task came in after the bin job
+ * completed and exited. This can happen because the HW
+ * signals OOM before it's fully OOM, so the binner might just
+ * barely complete.
+ *
+ * If we lose the race and our work task comes in after a new
+ * bin job got scheduled, that's fine. We'll just give them
+ * some binner pool anyway.
+ */
+ spin_lock_irqsave(&v3d->job_lock, irqflags);
+ if (!v3d->bin_job) {
+ spin_unlock_irqrestore(&v3d->job_lock, irqflags);
+ goto out;
+ }
+
+ drm_gem_object_get(&bo->base);
+ list_add_tail(&bo->unref_head, &v3d->bin_job->unref_list);
+ spin_unlock_irqrestore(&v3d->job_lock, irqflags);
+
+ V3D_CORE_WRITE(0, V3D_PTB_BPOA, bo->node.start << PAGE_SHIFT);
+ V3D_CORE_WRITE(0, V3D_PTB_BPOS, bo->base.size);
+
+out:
+ drm_gem_object_put_unlocked(&bo->base);
+}
+
+static irqreturn_t
+v3d_irq(int irq, void *arg)
+{
+ struct v3d_dev *v3d = arg;
+ u32 intsts;
+ irqreturn_t status = IRQ_NONE;
+
+ intsts = V3D_CORE_READ(0, V3D_CTL_INT_STS);
+
+ /* Acknowledge the interrupts we're handling here. */
+ V3D_CORE_WRITE(0, V3D_CTL_INT_CLR, intsts);
+
+ if (intsts & V3D_INT_OUTOMEM) {
+ /* Note that the OOM status is edge signaled, so the
+ * interrupt won't happen again until the we actually
+ * add more memory.
+ */
+ schedule_work(&v3d->overflow_mem_work);
+ status = IRQ_HANDLED;
+ }
+
+ if (intsts & V3D_INT_FLDONE) {
+ v3d->queue[V3D_BIN].finished_seqno++;
+ dma_fence_signal(v3d->bin_job->bin.done_fence);
+ status = IRQ_HANDLED;
+ }
+
+ if (intsts & V3D_INT_FRDONE) {
+ v3d->queue[V3D_RENDER].finished_seqno++;
+ dma_fence_signal(v3d->render_job->render.done_fence);
+
+ status = IRQ_HANDLED;
+ }
+
+ /* We shouldn't be triggering these if we have GMP in
+ * always-allowed mode.
+ */
+ if (intsts & V3D_INT_GMPV)
+ dev_err(v3d->dev, "GMP violation\n");
+
+ return status;
+}
+
+static irqreturn_t
+v3d_hub_irq(int irq, void *arg)
+{
+ struct v3d_dev *v3d = arg;
+ u32 intsts;
+ irqreturn_t status = IRQ_NONE;
+
+ intsts = V3D_READ(V3D_HUB_INT_STS);
+
+ /* Acknowledge the interrupts we're handling here. */
+ V3D_WRITE(V3D_HUB_INT_CLR, intsts);
+
+ if (intsts & (V3D_HUB_INT_MMU_WRV |
+ V3D_HUB_INT_MMU_PTI |
+ V3D_HUB_INT_MMU_CAP)) {
+ u32 axi_id = V3D_READ(V3D_MMU_VIO_ID);
+ u64 vio_addr = (u64)V3D_READ(V3D_MMU_VIO_ADDR) << 8;
+
+ dev_err(v3d->dev, "MMU error from client %d at 0x%08llx%s%s%s\n",
+ axi_id, (long long)vio_addr,
+ ((intsts & V3D_HUB_INT_MMU_WRV) ?
+ ", write violation" : ""),
+ ((intsts & V3D_HUB_INT_MMU_PTI) ?
+ ", pte invalid" : ""),
+ ((intsts & V3D_HUB_INT_MMU_CAP) ?
+ ", cap exceeded" : ""));
+ status = IRQ_HANDLED;
+ }
+
+ return status;
+}
+
+void
+v3d_irq_init(struct v3d_dev *v3d)
+{
+ int ret, core;
+
+ INIT_WORK(&v3d->overflow_mem_work, v3d_overflow_mem_work);
+
+ /* Clear any pending interrupts someone might have left around
+ * for us.
+ */
+ for (core = 0; core < v3d->cores; core++)
+ V3D_CORE_WRITE(core, V3D_CTL_INT_CLR, V3D_CORE_IRQS);
+ V3D_WRITE(V3D_HUB_INT_CLR, V3D_HUB_IRQS);
+
+ ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 0),
+ v3d_hub_irq, IRQF_SHARED,
+ "v3d_hub", v3d);
+ ret = devm_request_irq(v3d->dev, platform_get_irq(v3d->pdev, 1),
+ v3d_irq, IRQF_SHARED,
+ "v3d_core0", v3d);
+ if (ret)
+ dev_err(v3d->dev, "IRQ setup failed: %d\n", ret);
+
+ v3d_irq_enable(v3d);
+}
+
+void
+v3d_irq_enable(struct v3d_dev *v3d)
+{
+ int core;
+
+ /* Enable our set of interrupts, masking out any others. */
+ for (core = 0; core < v3d->cores; core++) {
+ V3D_CORE_WRITE(core, V3D_CTL_INT_MSK_SET, ~V3D_CORE_IRQS);
+ V3D_CORE_WRITE(core, V3D_CTL_INT_MSK_CLR, V3D_CORE_IRQS);
+ }
+
+ V3D_WRITE(V3D_HUB_INT_MSK_SET, ~V3D_HUB_IRQS);
+ V3D_WRITE(V3D_HUB_INT_MSK_CLR, V3D_HUB_IRQS);
+}
+
+void
+v3d_irq_disable(struct v3d_dev *v3d)
+{
+ int core;
+
+ /* Disable all interrupts. */
+ for (core = 0; core < v3d->cores; core++)
+ V3D_CORE_WRITE(core, V3D_CTL_INT_MSK_SET, ~0);
+ V3D_WRITE(V3D_HUB_INT_MSK_SET, ~0);
+
+ /* Clear any pending interrupts we might have left. */
+ for (core = 0; core < v3d->cores; core++)
+ V3D_CORE_WRITE(core, V3D_CTL_INT_CLR, V3D_CORE_IRQS);
+ V3D_WRITE(V3D_HUB_INT_CLR, V3D_HUB_IRQS);
+
+ cancel_work_sync(&v3d->overflow_mem_work);
+}
+
+/** Reinitializes interrupt registers when a GPU reset is performed. */
+void v3d_irq_reset(struct v3d_dev *v3d)
+{
+ v3d_irq_enable(v3d);
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (C) 2017-2018 Broadcom */
+
+/**
+ * DOC: Broadcom V3D MMU
+ *
+ * The V3D 3.x hardware (compared to VC4) now includes an MMU. It has
+ * a single level of page tables for the V3D's 4GB address space to
+ * map to AXI bus addresses, thus it could need up to 4MB of
+ * physically contiguous memory to store the PTEs.
+ *
+ * Because the 4MB of contiguous memory for page tables is precious,
+ * and switching between them is expensive, we load all BOs into the
+ * same 4GB address space.
+ *
+ * To protect clients from each other, we should use the GMP to
+ * quickly mask out (at 128kb granularity) what pages are available to
+ * each client. This is not yet implemented.
+ */
+
+#include "v3d_drv.h"
+#include "v3d_regs.h"
+
+#define V3D_MMU_PAGE_SHIFT 12
+
+/* Note: All PTEs for the 1MB superpage must be filled with the
+ * superpage bit set.
+ */
+#define V3D_PTE_SUPERPAGE BIT(31)
+#define V3D_PTE_WRITEABLE BIT(29)
+#define V3D_PTE_VALID BIT(28)
+
+static int v3d_mmu_flush_all(struct v3d_dev *v3d)
+{
+ int ret;
+
+ /* Make sure that another flush isn't already running when we
+ * start this one.
+ */
+ ret = wait_for(!(V3D_READ(V3D_MMU_CTL) &
+ V3D_MMU_CTL_TLB_CLEARING), 100);
+ if (ret)
+ dev_err(v3d->dev, "TLB clear wait idle pre-wait failed\n");
+
+ V3D_WRITE(V3D_MMU_CTL, V3D_READ(V3D_MMU_CTL) |
+ V3D_MMU_CTL_TLB_CLEAR);
+
+ V3D_WRITE(V3D_MMUC_CONTROL,
+ V3D_MMUC_CONTROL_FLUSH |
+ V3D_MMUC_CONTROL_ENABLE);
+
+ ret = wait_for(!(V3D_READ(V3D_MMU_CTL) &
+ V3D_MMU_CTL_TLB_CLEARING), 100);
+ if (ret) {
+ dev_err(v3d->dev, "TLB clear wait idle failed\n");
+ return ret;
+ }
+
+ ret = wait_for(!(V3D_READ(V3D_MMUC_CONTROL) &
+ V3D_MMUC_CONTROL_FLUSHING), 100);
+ if (ret)
+ dev_err(v3d->dev, "MMUC flush wait idle failed\n");
+
+ return ret;
+}
+
+int v3d_mmu_set_page_table(struct v3d_dev *v3d)
+{
+ V3D_WRITE(V3D_MMU_PT_PA_BASE, v3d->pt_paddr >> V3D_MMU_PAGE_SHIFT);
+ V3D_WRITE(V3D_MMU_CTL,
+ V3D_MMU_CTL_ENABLE |
+ V3D_MMU_CTL_PT_INVALID |
+ V3D_MMU_CTL_PT_INVALID_ABORT |
+ V3D_MMU_CTL_WRITE_VIOLATION_ABORT |
+ V3D_MMU_CTL_CAP_EXCEEDED_ABORT);
+ V3D_WRITE(V3D_MMU_ILLEGAL_ADDR,
+ (v3d->mmu_scratch_paddr >> V3D_MMU_PAGE_SHIFT) |
+ V3D_MMU_ILLEGAL_ADDR_ENABLE);
+ V3D_WRITE(V3D_MMUC_CONTROL, V3D_MMUC_CONTROL_ENABLE);
+
+ return v3d_mmu_flush_all(v3d);
+}
+
+void v3d_mmu_insert_ptes(struct v3d_bo *bo)
+{
+ struct v3d_dev *v3d = to_v3d_dev(bo->base.dev);
+ u32 page = bo->node.start;
+ u32 page_prot = V3D_PTE_WRITEABLE | V3D_PTE_VALID;
+ unsigned int count;
+ struct scatterlist *sgl;
+
+ for_each_sg(bo->sgt->sgl, sgl, bo->sgt->nents, count) {
+ u32 page_address = sg_dma_address(sgl) >> V3D_MMU_PAGE_SHIFT;
+ u32 pte = page_prot | page_address;
+ u32 i;
+
+ BUG_ON(page_address + (sg_dma_len(sgl) >> V3D_MMU_PAGE_SHIFT) >=
+ BIT(24));
+
+ for (i = 0; i < sg_dma_len(sgl) >> V3D_MMU_PAGE_SHIFT; i++)
+ v3d->pt[page++] = pte + i;
+ }
+
+ WARN_ON_ONCE(page - bo->node.start !=
+ bo->base.size >> V3D_MMU_PAGE_SHIFT);
+
+ if (v3d_mmu_flush_all(v3d))
+ dev_err(v3d->dev, "MMU flush timeout\n");
+}
+
+void v3d_mmu_remove_ptes(struct v3d_bo *bo)
+{
+ struct v3d_dev *v3d = to_v3d_dev(bo->base.dev);
+ u32 npages = bo->base.size >> V3D_MMU_PAGE_SHIFT;
+ u32 page;
+
+ for (page = bo->node.start; page < bo->node.start + npages; page++)
+ v3d->pt[page] = 0;
+
+ if (v3d_mmu_flush_all(v3d))
+ dev_err(v3d->dev, "MMU flush timeout\n");
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (C) 2017-2018 Broadcom */
+
+#ifndef V3D_REGS_H
+#define V3D_REGS_H
+
+#include <linux/bitops.h>
+
+#define V3D_MASK(high, low) ((u32)GENMASK(high, low))
+/* Using the GNU statement expression extension */
+#define V3D_SET_FIELD(value, field) \
+ ({ \
+ u32 fieldval = (value) << field##_SHIFT; \
+ WARN_ON((fieldval & ~field##_MASK) != 0); \
+ fieldval & field##_MASK; \
+ })
+
+#define V3D_GET_FIELD(word, field) (((word) & field##_MASK) >> \
+ field##_SHIFT)
+
+/* Hub registers for shared hardware between V3D cores. */
+
+#define V3D_HUB_AXICFG 0x00000
+# define V3D_HUB_AXICFG_MAX_LEN_MASK V3D_MASK(3, 0)
+# define V3D_HUB_AXICFG_MAX_LEN_SHIFT 0
+#define V3D_HUB_UIFCFG 0x00004
+#define V3D_HUB_IDENT0 0x00008
+
+#define V3D_HUB_IDENT1 0x0000c
+# define V3D_HUB_IDENT1_WITH_MSO BIT(19)
+# define V3D_HUB_IDENT1_WITH_TSY BIT(18)
+# define V3D_HUB_IDENT1_WITH_TFU BIT(17)
+# define V3D_HUB_IDENT1_WITH_L3C BIT(16)
+# define V3D_HUB_IDENT1_NHOSTS_MASK V3D_MASK(15, 12)
+# define V3D_HUB_IDENT1_NHOSTS_SHIFT 12
+# define V3D_HUB_IDENT1_NCORES_MASK V3D_MASK(11, 8)
+# define V3D_HUB_IDENT1_NCORES_SHIFT 8
+# define V3D_HUB_IDENT1_REV_MASK V3D_MASK(7, 4)
+# define V3D_HUB_IDENT1_REV_SHIFT 4
+# define V3D_HUB_IDENT1_TVER_MASK V3D_MASK(3, 0)
+# define V3D_HUB_IDENT1_TVER_SHIFT 0
+
+#define V3D_HUB_IDENT2 0x00010
+# define V3D_HUB_IDENT2_WITH_MMU BIT(8)
+# define V3D_HUB_IDENT2_L3C_NKB_MASK V3D_MASK(7, 0)
+# define V3D_HUB_IDENT2_L3C_NKB_SHIFT 0
+
+#define V3D_HUB_IDENT3 0x00014
+# define V3D_HUB_IDENT3_IPREV_MASK V3D_MASK(15, 8)
+# define V3D_HUB_IDENT3_IPREV_SHIFT 8
+# define V3D_HUB_IDENT3_IPIDX_MASK V3D_MASK(7, 0)
+# define V3D_HUB_IDENT3_IPIDX_SHIFT 0
+
+#define V3D_HUB_INT_STS 0x00050
+#define V3D_HUB_INT_SET 0x00054
+#define V3D_HUB_INT_CLR 0x00058
+#define V3D_HUB_INT_MSK_STS 0x0005c
+#define V3D_HUB_INT_MSK_SET 0x00060
+#define V3D_HUB_INT_MSK_CLR 0x00064
+# define V3D_HUB_INT_MMU_WRV BIT(5)
+# define V3D_HUB_INT_MMU_PTI BIT(4)
+# define V3D_HUB_INT_MMU_CAP BIT(3)
+# define V3D_HUB_INT_MSO BIT(2)
+# define V3D_HUB_INT_TFUC BIT(1)
+# define V3D_HUB_INT_TFUF BIT(0)
+
+#define V3D_GCA_CACHE_CTRL 0x0000c
+# define V3D_GCA_CACHE_CTRL_FLUSH BIT(0)
+
+#define V3D_GCA_SAFE_SHUTDOWN 0x000b0
+# define V3D_GCA_SAFE_SHUTDOWN_EN BIT(0)
+
+#define V3D_GCA_SAFE_SHUTDOWN_ACK 0x000b4
+# define V3D_GCA_SAFE_SHUTDOWN_ACK_ACKED 3
+
+# define V3D_TOP_GR_BRIDGE_REVISION 0x00000
+# define V3D_TOP_GR_BRIDGE_MAJOR_MASK V3D_MASK(15, 8)
+# define V3D_TOP_GR_BRIDGE_MAJOR_SHIFT 8
+# define V3D_TOP_GR_BRIDGE_MINOR_MASK V3D_MASK(7, 0)
+# define V3D_TOP_GR_BRIDGE_MINOR_SHIFT 0
+
+/* 7268 reset reg */
+# define V3D_TOP_GR_BRIDGE_SW_INIT_0 0x00008
+# define V3D_TOP_GR_BRIDGE_SW_INIT_0_V3D_CLK_108_SW_INIT BIT(0)
+/* 7278 reset reg */
+# define V3D_TOP_GR_BRIDGE_SW_INIT_1 0x0000c
+# define V3D_TOP_GR_BRIDGE_SW_INIT_1_V3D_CLK_108_SW_INIT BIT(0)
+
+/* Per-MMU registers. */
+
+#define V3D_MMUC_CONTROL 0x01000
+# define V3D_MMUC_CONTROL_CLEAR BIT(3)
+# define V3D_MMUC_CONTROL_FLUSHING BIT(2)
+# define V3D_MMUC_CONTROL_FLUSH BIT(1)
+# define V3D_MMUC_CONTROL_ENABLE BIT(0)
+
+#define V3D_MMU_CTL 0x01200
+# define V3D_MMU_CTL_CAP_EXCEEDED BIT(27)
+# define V3D_MMU_CTL_CAP_EXCEEDED_ABORT BIT(26)
+# define V3D_MMU_CTL_CAP_EXCEEDED_INT BIT(25)
+# define V3D_MMU_CTL_CAP_EXCEEDED_EXCEPTION BIT(24)
+# define V3D_MMU_CTL_PT_INVALID BIT(20)
+# define V3D_MMU_CTL_PT_INVALID_ABORT BIT(19)
+# define V3D_MMU_CTL_PT_INVALID_INT BIT(18)
+# define V3D_MMU_CTL_PT_INVALID_EXCEPTION BIT(17)
+# define V3D_MMU_CTL_WRITE_VIOLATION BIT(16)
+# define V3D_MMU_CTL_WRITE_VIOLATION_ABORT BIT(11)
+# define V3D_MMU_CTL_WRITE_VIOLATION_INT BIT(10)
+# define V3D_MMU_CTL_WRITE_VIOLATION_EXCEPTION BIT(9)
+# define V3D_MMU_CTL_TLB_CLEARING BIT(7)
+# define V3D_MMU_CTL_TLB_STATS_CLEAR BIT(3)
+# define V3D_MMU_CTL_TLB_CLEAR BIT(2)
+# define V3D_MMU_CTL_TLB_STATS_ENABLE BIT(1)
+# define V3D_MMU_CTL_ENABLE BIT(0)
+
+#define V3D_MMU_PT_PA_BASE 0x01204
+#define V3D_MMU_HIT 0x01208
+#define V3D_MMU_MISSES 0x0120c
+#define V3D_MMU_STALLS 0x01210
+
+#define V3D_MMU_ADDR_CAP 0x01214
+# define V3D_MMU_ADDR_CAP_ENABLE BIT(31)
+# define V3D_MMU_ADDR_CAP_MPAGE_MASK V3D_MASK(11, 0)
+# define V3D_MMU_ADDR_CAP_MPAGE_SHIFT 0
+
+#define V3D_MMU_SHOOT_DOWN 0x01218
+# define V3D_MMU_SHOOT_DOWN_SHOOTING BIT(29)
+# define V3D_MMU_SHOOT_DOWN_SHOOT BIT(28)
+# define V3D_MMU_SHOOT_DOWN_PAGE_MASK V3D_MASK(27, 0)
+# define V3D_MMU_SHOOT_DOWN_PAGE_SHIFT 0
+
+#define V3D_MMU_BYPASS_START 0x0121c
+#define V3D_MMU_BYPASS_END 0x01220
+
+/* AXI ID of the access that faulted */
+#define V3D_MMU_VIO_ID 0x0122c
+
+/* Address for illegal PTEs to return */
+#define V3D_MMU_ILLEGAL_ADDR 0x01230
+# define V3D_MMU_ILLEGAL_ADDR_ENABLE BIT(31)
+
+/* Address that faulted */
+#define V3D_MMU_VIO_ADDR 0x01234
+
+/* Per-V3D-core registers */
+
+#define V3D_CTL_IDENT0 0x00000
+# define V3D_IDENT0_VER_MASK V3D_MASK(31, 24)
+# define V3D_IDENT0_VER_SHIFT 24
+
+#define V3D_CTL_IDENT1 0x00004
+/* Multiples of 1kb */
+# define V3D_IDENT1_VPM_SIZE_MASK V3D_MASK(31, 28)
+# define V3D_IDENT1_VPM_SIZE_SHIFT 28
+# define V3D_IDENT1_NSEM_MASK V3D_MASK(23, 16)
+# define V3D_IDENT1_NSEM_SHIFT 16
+# define V3D_IDENT1_NTMU_MASK V3D_MASK(15, 12)
+# define V3D_IDENT1_NTMU_SHIFT 12
+# define V3D_IDENT1_QUPS_MASK V3D_MASK(11, 8)
+# define V3D_IDENT1_QUPS_SHIFT 8
+# define V3D_IDENT1_NSLC_MASK V3D_MASK(7, 4)
+# define V3D_IDENT1_NSLC_SHIFT 4
+# define V3D_IDENT1_REV_MASK V3D_MASK(3, 0)
+# define V3D_IDENT1_REV_SHIFT 0
+
+#define V3D_CTL_IDENT2 0x00008
+# define V3D_IDENT2_BCG_INT BIT(28)
+
+#define V3D_CTL_MISCCFG 0x00018
+# define V3D_MISCCFG_OVRTMUOUT BIT(0)
+
+#define V3D_CTL_L2CACTL 0x00020
+# define V3D_L2CACTL_L2CCLR BIT(2)
+# define V3D_L2CACTL_L2CDIS BIT(1)
+# define V3D_L2CACTL_L2CENA BIT(0)
+
+#define V3D_CTL_SLCACTL 0x00024
+# define V3D_SLCACTL_TVCCS_MASK V3D_MASK(27, 24)
+# define V3D_SLCACTL_TVCCS_SHIFT 24
+# define V3D_SLCACTL_TDCCS_MASK V3D_MASK(19, 16)
+# define V3D_SLCACTL_TDCCS_SHIFT 16
+# define V3D_SLCACTL_UCC_MASK V3D_MASK(11, 8)
+# define V3D_SLCACTL_UCC_SHIFT 8
+# define V3D_SLCACTL_ICC_MASK V3D_MASK(3, 0)
+# define V3D_SLCACTL_ICC_SHIFT 0
+
+#define V3D_CTL_L2TCACTL 0x00030
+# define V3D_L2TCACTL_TMUWCF BIT(8)
+# define V3D_L2TCACTL_L2T_NO_WM BIT(4)
+# define V3D_L2TCACTL_FLM_FLUSH 0
+# define V3D_L2TCACTL_FLM_CLEAR 1
+# define V3D_L2TCACTL_FLM_CLEAN 2
+# define V3D_L2TCACTL_FLM_MASK V3D_MASK(2, 1)
+# define V3D_L2TCACTL_FLM_SHIFT 1
+# define V3D_L2TCACTL_L2TFLS BIT(0)
+#define V3D_CTL_L2TFLSTA 0x00034
+#define V3D_CTL_L2TFLEND 0x00038
+
+#define V3D_CTL_INT_STS 0x00050
+#define V3D_CTL_INT_SET 0x00054
+#define V3D_CTL_INT_CLR 0x00058
+#define V3D_CTL_INT_MSK_STS 0x0005c
+#define V3D_CTL_INT_MSK_SET 0x00060
+#define V3D_CTL_INT_MSK_CLR 0x00064
+# define V3D_INT_QPU_MASK V3D_MASK(27, 16)
+# define V3D_INT_QPU_SHIFT 16
+# define V3D_INT_GMPV BIT(5)
+# define V3D_INT_TRFB BIT(4)
+# define V3D_INT_SPILLUSE BIT(3)
+# define V3D_INT_OUTOMEM BIT(2)
+# define V3D_INT_FLDONE BIT(1)
+# define V3D_INT_FRDONE BIT(0)
+
+#define V3D_CLE_CT0CS 0x00100
+#define V3D_CLE_CT1CS 0x00104
+#define V3D_CLE_CTNCS(n) (V3D_CLE_CT0CS + 4 * n)
+#define V3D_CLE_CT0EA 0x00108
+#define V3D_CLE_CT1EA 0x0010c
+#define V3D_CLE_CTNEA(n) (V3D_CLE_CT0EA + 4 * n)
+#define V3D_CLE_CT0CA 0x00110
+#define V3D_CLE_CT1CA 0x00114
+#define V3D_CLE_CTNCA(n) (V3D_CLE_CT0CA + 4 * n)
+#define V3D_CLE_CT0RA 0x00118
+#define V3D_CLE_CT1RA 0x0011c
+#define V3D_CLE_CT0LC 0x00120
+#define V3D_CLE_CT1LC 0x00124
+#define V3D_CLE_CT0PC 0x00128
+#define V3D_CLE_CT1PC 0x0012c
+#define V3D_CLE_PCS 0x00130
+#define V3D_CLE_BFC 0x00134
+#define V3D_CLE_RFC 0x00138
+#define V3D_CLE_TFBC 0x0013c
+#define V3D_CLE_TFIT 0x00140
+#define V3D_CLE_CT1CFG 0x00144
+#define V3D_CLE_CT1TILECT 0x00148
+#define V3D_CLE_CT1TSKIP 0x0014c
+#define V3D_CLE_CT1PTCT 0x00150
+#define V3D_CLE_CT0SYNC 0x00154
+#define V3D_CLE_CT1SYNC 0x00158
+#define V3D_CLE_CT0QTS 0x0015c
+# define V3D_CLE_CT0QTS_ENABLE BIT(1)
+#define V3D_CLE_CT0QBA 0x00160
+#define V3D_CLE_CT1QBA 0x00164
+#define V3D_CLE_CTNQBA(n) (V3D_CLE_CT0QBA + 4 * n)
+#define V3D_CLE_CT0QEA 0x00168
+#define V3D_CLE_CT1QEA 0x0016c
+#define V3D_CLE_CTNQEA(n) (V3D_CLE_CT0QEA + 4 * n)
+#define V3D_CLE_CT0QMA 0x00170
+#define V3D_CLE_CT0QMS 0x00174
+#define V3D_CLE_CT1QCFG 0x00178
+/* If set without ETPROC, entirely skip tiles with no primitives. */
+# define V3D_CLE_QCFG_ETFILT BIT(7)
+/* If set with ETFILT, just write the clear color to tiles with no
+ * primitives.
+ */
+# define V3D_CLE_QCFG_ETPROC BIT(6)
+# define V3D_CLE_QCFG_ETSFLUSH BIT(1)
+# define V3D_CLE_QCFG_MCDIS BIT(0)
+
+#define V3D_PTB_BPCA 0x00300
+#define V3D_PTB_BPCS 0x00304
+#define V3D_PTB_BPOA 0x00308
+#define V3D_PTB_BPOS 0x0030c
+
+#define V3D_PTB_BXCF 0x00310
+# define V3D_PTB_BXCF_RWORDERDISA BIT(1)
+# define V3D_PTB_BXCF_CLIPDISA BIT(0)
+
+#define V3D_GMP_STATUS 0x00800
+# define V3D_GMP_STATUS_GMPRST BIT(31)
+# define V3D_GMP_STATUS_WR_COUNT_MASK V3D_MASK(30, 24)
+# define V3D_GMP_STATUS_WR_COUNT_SHIFT 24
+# define V3D_GMP_STATUS_RD_COUNT_MASK V3D_MASK(22, 16)
+# define V3D_GMP_STATUS_RD_COUNT_SHIFT 16
+# define V3D_GMP_STATUS_WR_ACTIVE BIT(5)
+# define V3D_GMP_STATUS_RD_ACTIVE BIT(4)
+# define V3D_GMP_STATUS_CFG_BUSY BIT(3)
+# define V3D_GMP_STATUS_CNTOVF BIT(2)
+# define V3D_GMP_STATUS_INVPROT BIT(1)
+# define V3D_GMP_STATUS_VIO BIT(0)
+
+#define V3D_GMP_CFG 0x00804
+# define V3D_GMP_CFG_LBURSTEN BIT(3)
+# define V3D_GMP_CFG_PGCRSEN BIT()
+# define V3D_GMP_CFG_STOP_REQ BIT(1)
+# define V3D_GMP_CFG_PROT_ENABLE BIT(0)
+
+#define V3D_GMP_VIO_ADDR 0x00808
+#define V3D_GMP_VIO_TYPE 0x0080c
+#define V3D_GMP_TABLE_ADDR 0x00810
+#define V3D_GMP_CLEAR_LOAD 0x00814
+#define V3D_GMP_PRESERVE_LOAD 0x00818
+#define V3D_GMP_VALID_LINES 0x00820
+
+#endif /* V3D_REGS_H */
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (C) 2018 Broadcom */
+
+/**
+ * DOC: Broadcom V3D scheduling
+ *
+ * The shared DRM GPU scheduler is used to coordinate submitting jobs
+ * to the hardware. Each DRM fd (roughly a client process) gets its
+ * own scheduler entity, which will process jobs in order. The GPU
+ * scheduler will round-robin between clients to submit the next job.
+ *
+ * For simplicity, and in order to keep latency low for interactive
+ * jobs when bulk background jobs are queued up, we submit a new job
+ * to the HW only when it has completed the last one, instead of
+ * filling up the CT[01]Q FIFOs with jobs. Similarly, we use
+ * v3d_job_dependency() to manage the dependency between bin and
+ * render, instead of having the clients submit jobs with using the
+ * HW's semaphores to interlock between them.
+ */
+
+#include <linux/kthread.h>
+
+#include "v3d_drv.h"
+#include "v3d_regs.h"
+#include "v3d_trace.h"
+
+static struct v3d_job *
+to_v3d_job(struct drm_sched_job *sched_job)
+{
+ return container_of(sched_job, struct v3d_job, base);
+}
+
+static void
+v3d_job_free(struct drm_sched_job *sched_job)
+{
+ struct v3d_job *job = to_v3d_job(sched_job);
+
+ v3d_exec_put(job->exec);
+}
+
+/**
+ * Returns the fences that the bin job depends on, one by one.
+ * v3d_job_run() won't be called until all of them have been signaled.
+ */
+static struct dma_fence *
+v3d_job_dependency(struct drm_sched_job *sched_job,
+ struct drm_sched_entity *s_entity)
+{
+ struct v3d_job *job = to_v3d_job(sched_job);
+ struct v3d_exec_info *exec = job->exec;
+ enum v3d_queue q = job == &exec->bin ? V3D_BIN : V3D_RENDER;
+ struct dma_fence *fence;
+
+ fence = job->in_fence;
+ if (fence) {
+ job->in_fence = NULL;
+ return fence;
+ }
+
+ if (q == V3D_RENDER) {
+ /* If we had a bin job, the render job definitely depends on
+ * it. We first have to wait for bin to be scheduled, so that
+ * its done_fence is created.
+ */
+ fence = exec->bin_done_fence;
+ if (fence) {
+ exec->bin_done_fence = NULL;
+ return fence;
+ }
+ }
+
+ /* XXX: Wait on a fence for switching the GMP if necessary,
+ * and then do so.
+ */
+
+ return fence;
+}
+
+static struct dma_fence *v3d_job_run(struct drm_sched_job *sched_job)
+{
+ struct v3d_job *job = to_v3d_job(sched_job);
+ struct v3d_exec_info *exec = job->exec;
+ enum v3d_queue q = job == &exec->bin ? V3D_BIN : V3D_RENDER;
+ struct v3d_dev *v3d = exec->v3d;
+ struct drm_device *dev = &v3d->drm;
+ struct dma_fence *fence;
+ unsigned long irqflags;
+
+ if (unlikely(job->base.s_fence->finished.error))
+ return NULL;
+
+ /* Lock required around bin_job update vs
+ * v3d_overflow_mem_work().
+ */
+ spin_lock_irqsave(&v3d->job_lock, irqflags);
+ if (q == V3D_BIN) {
+ v3d->bin_job = job->exec;
+
+ /* Clear out the overflow allocation, so we don't
+ * reuse the overflow attached to a previous job.
+ */
+ V3D_CORE_WRITE(0, V3D_PTB_BPOS, 0);
+ } else {
+ v3d->render_job = job->exec;
+ }
+ spin_unlock_irqrestore(&v3d->job_lock, irqflags);
+
+ /* Can we avoid this flush when q==RENDER? We need to be
+ * careful of scheduling, though -- imagine job0 rendering to
+ * texture and job1 reading, and them being executed as bin0,
+ * bin1, render0, render1, so that render1's flush at bin time
+ * wasn't enough.
+ */
+ v3d_invalidate_caches(v3d);
+
+ fence = v3d_fence_create(v3d, q);
+ if (!fence)
+ return fence;
+
+ if (job->done_fence)
+ dma_fence_put(job->done_fence);
+ job->done_fence = dma_fence_get(fence);
+
+ trace_v3d_submit_cl(dev, q == V3D_RENDER, to_v3d_fence(fence)->seqno,
+ job->start, job->end);
+
+ if (q == V3D_BIN) {
+ if (exec->qma) {
+ V3D_CORE_WRITE(0, V3D_CLE_CT0QMA, exec->qma);
+ V3D_CORE_WRITE(0, V3D_CLE_CT0QMS, exec->qms);
+ }
+ if (exec->qts) {
+ V3D_CORE_WRITE(0, V3D_CLE_CT0QTS,
+ V3D_CLE_CT0QTS_ENABLE |
+ exec->qts);
+ }
+ } else {
+ /* XXX: Set the QCFG */
+ }
+
+ /* Set the current and end address of the control list.
+ * Writing the end register is what starts the job.
+ */
+ V3D_CORE_WRITE(0, V3D_CLE_CTNQBA(q), job->start);
+ V3D_CORE_WRITE(0, V3D_CLE_CTNQEA(q), job->end);
+
+ return fence;
+}
+
+static void
+v3d_job_timedout(struct drm_sched_job *sched_job)
+{
+ struct v3d_job *job = to_v3d_job(sched_job);
+ struct v3d_exec_info *exec = job->exec;
+ struct v3d_dev *v3d = exec->v3d;
+ enum v3d_queue q;
+
+ mutex_lock(&v3d->reset_lock);
+
+ /* block scheduler */
+ for (q = 0; q < V3D_MAX_QUEUES; q++) {
+ struct drm_gpu_scheduler *sched = &v3d->queue[q].sched;
+
+ kthread_park(sched->thread);
+ drm_sched_hw_job_reset(sched, (sched_job->sched == sched ?
+ sched_job : NULL));
+ }
+
+ /* get the GPU back into the init state */
+ v3d_reset(v3d);
+
+ /* Unblock schedulers and restart their jobs. */
+ for (q = 0; q < V3D_MAX_QUEUES; q++) {
+ drm_sched_job_recovery(&v3d->queue[q].sched);
+ kthread_unpark(v3d->queue[q].sched.thread);
+ }
+
+ mutex_unlock(&v3d->reset_lock);
+}
+
+static const struct drm_sched_backend_ops v3d_sched_ops = {
+ .dependency = v3d_job_dependency,
+ .run_job = v3d_job_run,
+ .timedout_job = v3d_job_timedout,
+ .free_job = v3d_job_free
+};
+
+int
+v3d_sched_init(struct v3d_dev *v3d)
+{
+ int hw_jobs_limit = 1;
+ int job_hang_limit = 0;
+ int hang_limit_ms = 500;
+ int ret;
+
+ ret = drm_sched_init(&v3d->queue[V3D_BIN].sched,
+ &v3d_sched_ops,
+ hw_jobs_limit, job_hang_limit,
+ msecs_to_jiffies(hang_limit_ms),
+ "v3d_bin");
+ if (ret) {
+ dev_err(v3d->dev, "Failed to create bin scheduler: %d.", ret);
+ return ret;
+ }
+
+ ret = drm_sched_init(&v3d->queue[V3D_RENDER].sched,
+ &v3d_sched_ops,
+ hw_jobs_limit, job_hang_limit,
+ msecs_to_jiffies(hang_limit_ms),
+ "v3d_render");
+ if (ret) {
+ dev_err(v3d->dev, "Failed to create render scheduler: %d.",
+ ret);
+ drm_sched_fini(&v3d->queue[V3D_BIN].sched);
+ return ret;
+ }
+
+ return 0;
+}
+
+void
+v3d_sched_fini(struct v3d_dev *v3d)
+{
+ enum v3d_queue q;
+
+ for (q = 0; q < V3D_MAX_QUEUES; q++)
+ drm_sched_fini(&v3d->queue[q].sched);
+}
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (C) 2015-2018 Broadcom */
+
+#if !defined(_V3D_TRACE_H_) || defined(TRACE_HEADER_MULTI_READ)
+#define _V3D_TRACE_H_
+
+#include <linux/stringify.h>
+#include <linux/types.h>
+#include <linux/tracepoint.h>
+
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM v3d
+#define TRACE_INCLUDE_FILE v3d_trace
+
+TRACE_EVENT(v3d_submit_cl,
+ TP_PROTO(struct drm_device *dev, bool is_render,
+ uint64_t seqno,
+ u32 ctnqba, u32 ctnqea),
+ TP_ARGS(dev, is_render, seqno, ctnqba, ctnqea),
+
+ TP_STRUCT__entry(
+ __field(u32, dev)
+ __field(bool, is_render)
+ __field(u64, seqno)
+ __field(u32, ctnqba)
+ __field(u32, ctnqea)
+ ),
+
+ TP_fast_assign(
+ __entry->dev = dev->primary->index;
+ __entry->is_render = is_render;
+ __entry->seqno = seqno;
+ __entry->ctnqba = ctnqba;
+ __entry->ctnqea = ctnqea;
+ ),
+
+ TP_printk("dev=%u, %s, seqno=%llu, 0x%08x..0x%08x",
+ __entry->dev,
+ __entry->is_render ? "RCL" : "BCL",
+ __entry->seqno,
+ __entry->ctnqba,
+ __entry->ctnqea)
+);
+
+TRACE_EVENT(v3d_reset_begin,
+ TP_PROTO(struct drm_device *dev),
+ TP_ARGS(dev),
+
+ TP_STRUCT__entry(
+ __field(u32, dev)
+ ),
+
+ TP_fast_assign(
+ __entry->dev = dev->primary->index;
+ ),
+
+ TP_printk("dev=%u",
+ __entry->dev)
+);
+
+TRACE_EVENT(v3d_reset_end,
+ TP_PROTO(struct drm_device *dev),
+ TP_ARGS(dev),
+
+ TP_STRUCT__entry(
+ __field(u32, dev)
+ ),
+
+ TP_fast_assign(
+ __entry->dev = dev->primary->index;
+ ),
+
+ TP_printk("dev=%u",
+ __entry->dev)
+);
+
+#endif /* _V3D_TRACE_H_ */
+
+/* This part must be outside protection */
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#include <trace/define_trace.h>
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0+
+/* Copyright (C) 2015 Broadcom */
+
+#include "v3d_drv.h"
+
+#ifndef __CHECKER__
+#define CREATE_TRACE_POINTS
+#include "v3d_trace.h"
+#endif
DRIVER_GEM |
DRIVER_HAVE_IRQ |
DRIVER_RENDER |
- DRIVER_PRIME),
+ DRIVER_PRIME |
+ DRIVER_SYNCOBJ),
.lastclose = drm_fb_helper_lastclose,
.open = vc4_open,
.postclose = vc4_close,
#include <drm/drm_encoder.h>
#include <drm/drm_gem_cma_helper.h>
#include <drm/drm_atomic.h>
+#include <drm/drm_syncobj.h>
#include "uapi/drm/vc4_drm.h"
(dsi->lanes > 2 ? DSI1_STAT_PHY_D2_STOP : 0) |
(dsi->lanes > 3 ? DSI1_STAT_PHY_D3_STOP : 0));
int ret;
+ bool ulps_currently_enabled = (DSI_PORT_READ(PHY_AFEC0) &
+ DSI_PORT_BIT(PHY_AFEC0_LATCH_ULPS));
+
+ if (ulps == ulps_currently_enabled)
+ return;
DSI_PORT_WRITE(STAT, stat_ulps);
DSI_PORT_WRITE(PHYC, DSI_PORT_READ(PHYC) | phyc_ulps);
#include <linux/device.h>
#include <linux/io.h>
#include <linux/sched/signal.h>
+#include <linux/dma-fence-array.h>
#include "uapi/drm/vc4_drm.h"
#include "vc4_drv.h"
*/
static int
vc4_queue_submit(struct drm_device *dev, struct vc4_exec_info *exec,
- struct ww_acquire_ctx *acquire_ctx)
+ struct ww_acquire_ctx *acquire_ctx,
+ struct drm_syncobj *out_sync)
{
struct vc4_dev *vc4 = to_vc4_dev(dev);
struct vc4_exec_info *renderjob;
fence->seqno = exec->seqno;
exec->fence = &fence->base;
+ if (out_sync)
+ drm_syncobj_replace_fence(out_sync, exec->fence);
+
vc4_update_bo_seqnos(exec, seqno);
vc4_unlock_bo_reservations(dev, exec, acquire_ctx);
struct vc4_dev *vc4 = to_vc4_dev(dev);
struct vc4_file *vc4file = file_priv->driver_priv;
struct drm_vc4_submit_cl *args = data;
+ struct drm_syncobj *out_sync = NULL;
struct vc4_exec_info *exec;
struct ww_acquire_ctx acquire_ctx;
+ struct dma_fence *in_fence;
int ret = 0;
if ((args->flags & ~(VC4_SUBMIT_CL_USE_CLEAR_COLOR |
}
if (args->pad2 != 0) {
- DRM_DEBUG("->pad2 must be set to zero\n");
+ DRM_DEBUG("Invalid pad: 0x%08x\n", args->pad2);
return -EINVAL;
}
}
}
+ if (args->in_sync) {
+ ret = drm_syncobj_find_fence(file_priv, args->in_sync,
+ &in_fence);
+ if (ret)
+ goto fail;
+
+ /* When the fence (or fence array) is exclusively from our
+ * context we can skip the wait since jobs are executed in
+ * order of their submission through this ioctl and this can
+ * only have fences from a prior job.
+ */
+ if (!dma_fence_match_context(in_fence,
+ vc4->dma_fence_context)) {
+ ret = dma_fence_wait(in_fence, true);
+ if (ret) {
+ dma_fence_put(in_fence);
+ goto fail;
+ }
+ }
+
+ dma_fence_put(in_fence);
+ }
+
if (exec->args->bin_cl_size != 0) {
ret = vc4_get_bcl(dev, exec);
if (ret)
if (ret)
goto fail;
+ if (args->out_sync) {
+ out_sync = drm_syncobj_find(file_priv, args->out_sync);
+ if (!out_sync) {
+ ret = -EINVAL;
+ goto fail;
+ }
+
+ /* We replace the fence in out_sync in vc4_queue_submit since
+ * the render job could execute immediately after that call.
+ * If it finishes before our ioctl processing resumes the
+ * render job fence could already have been freed.
+ */
+ }
+
/* Clear this out of the struct we'll be putting in the queue,
* since it's part of our stack.
*/
exec->args = NULL;
- ret = vc4_queue_submit(dev, exec, &acquire_ctx);
+ ret = vc4_queue_submit(dev, exec, &acquire_ctx, out_sync);
+
+ /* The syncobj isn't part of the exec data and we need to free our
+ * reference even if job submission failed.
+ */
+ if (out_sync)
+ drm_syncobj_put(out_sync);
+
if (ret)
goto fail;
* overall CMA pool before they make scenes complicated enough to run
* out of bin space.
*/
-int
-vc4_allocate_bin_bo(struct drm_device *drm)
+static int vc4_allocate_bin_bo(struct drm_device *drm)
{
struct vc4_dev *vc4 = to_vc4_dev(drm);
struct vc4_v3d *v3d = vc4->v3d;
DRM_RENDER_ALLOW),
VMW_IOCTL_DEF(VMW_CURSOR_BYPASS,
vmw_kms_cursor_bypass_ioctl,
- DRM_MASTER | DRM_CONTROL_ALLOW),
+ DRM_MASTER),
VMW_IOCTL_DEF(VMW_CONTROL_STREAM, vmw_overlay_ioctl,
- DRM_MASTER | DRM_CONTROL_ALLOW),
+ DRM_MASTER),
VMW_IOCTL_DEF(VMW_CLAIM_STREAM, vmw_stream_claim_ioctl,
- DRM_MASTER | DRM_CONTROL_ALLOW),
+ DRM_MASTER),
VMW_IOCTL_DEF(VMW_UNREF_STREAM, vmw_stream_unref_ioctl,
- DRM_MASTER | DRM_CONTROL_ALLOW),
+ DRM_MASTER),
VMW_IOCTL_DEF(VMW_CREATE_CONTEXT, vmw_context_define_ioctl,
DRM_AUTH | DRM_RENDER_ALLOW),
buf_cfg.be_alloc = front_info->cfg.be_alloc;
shbuf = xen_drm_front_shbuf_alloc(&buf_cfg);
- if (!shbuf)
- return -ENOMEM;
+ if (IS_ERR(shbuf))
+ return PTR_ERR(shbuf);
ret = dbuf_add_to_list(front_info, shbuf, dbuf_cookie);
if (ret < 0) {
front_info->drm_info = drm_info;
drm_dev = drm_dev_alloc(&xen_drm_driver, dev);
- if (!drm_dev) {
- ret = -ENOMEM;
+ if (IS_ERR(drm_dev)) {
+ ret = PTR_ERR(drm_dev);
goto fail;
}
*/
while ((xenbus_read_unsigned(front_info->xb_dev->otherend, "state",
XenbusStateUnknown) != XenbusStateInitWait) &&
- to--)
+ --to)
msleep(10);
if (!to) {
buf = kzalloc(sizeof(*buf), GFP_KERNEL);
if (!buf)
- return NULL;
+ return ERR_PTR(-ENOMEM);
if (cfg->be_alloc)
buf->ops = &backend_ops;
if (size < length)
return -ENOSPC;
+ if (frame->picture_aspect > HDMI_PICTURE_ASPECT_16_9)
+ return -EINVAL;
+
memset(buffer, 0, size);
ptr[0] = frame->type;
struct device *dev; /**< Device structure of bus-device */
struct drm_driver *driver; /**< DRM driver managing the device */
void *dev_private; /**< DRM driver private data */
- struct drm_minor *control; /**< Control node */
struct drm_minor *primary; /**< Primary node */
struct drm_minor *render; /**< Render node */
bool registered;
/* AUX CH addresses */
/* DPCD */
#define DP_DPCD_REV 0x000
+# define DP_DPCD_REV_10 0x10
+# define DP_DPCD_REV_11 0x11
+# define DP_DPCD_REV_12 0x12
+# define DP_DPCD_REV_13 0x13
+# define DP_DPCD_REV_14 0x14
#define DP_MAX_LINK_RATE 0x001
# define DP_DPCD_DISPLAY_CONTROL_CAPABLE (1 << 3) /* edp v1.2 or higher */
#define DP_TRAINING_AUX_RD_INTERVAL 0x00e /* XXX 1.2? */
+# define DP_TRAINING_AUX_RD_MASK 0x7F /* XXX 1.2? */
#define DP_ADAPTER_CAP 0x00f /* 1.2 */
# define DP_FORCE_LOAD_SENSE_CAP (1 << 0)
#define DP_SDP_VSC_EXT_CEA 0x21 /* DP 1.4 */
/* 0x80+ CEA-861 infoframe types */
-struct edp_sdp_header {
+struct dp_sdp_header {
u8 HB0; /* Secondary Data Packet ID */
u8 HB1; /* Secondary Data Packet Type */
- u8 HB2; /* 7:5 reserved, 4:0 revision number */
- u8 HB3; /* 7:5 reserved, 4:0 number of valid data bytes */
+ u8 HB2; /* Secondary Data Packet Specific header, Byte 0 */
+ u8 HB3; /* Secondary Data packet Specific header, Byte 1 */
} __packed;
#define EDP_SDP_HEADER_REVISION_MASK 0x1F
#define EDP_SDP_HEADER_VALID_PAYLOAD_BYTES 0x1F
struct edp_vsc_psr {
- struct edp_sdp_header sdp_header;
+ struct dp_sdp_header sdp_header;
u8 DB0; /* Stereo Interface */
u8 DB1; /* 0 - PSR State; 1 - Update RFB; 2 - CRC Valid */
u8 DB2; /* CRC value bits 7:0 of the R or Cr component */
enum drm_minor_type {
DRM_MINOR_PRIMARY,
- DRM_MINOR_CONTROL,
DRM_MINOR_RENDER,
};
/** @atomic: True if client understands atomic properties. */
unsigned atomic:1;
+ /**
+ * @aspect_ratio_allowed:
+ *
+ * True, if client can handle picture aspect ratios, and has requested
+ * to pass this information along with the mode.
+ */
+ unsigned aspect_ratio_allowed:1;
+
/**
* @is_master:
*
return file_priv->minor->type == DRM_MINOR_RENDER;
}
-/**
- * drm_is_control_client - is this an open file of the control node
- * @file_priv: DRM file
- *
- * Control nodes are deprecated and in the process of getting removed from the
- * DRM userspace API. Do not ever use!
- */
-static inline bool drm_is_control_client(const struct drm_file *file_priv)
-{
- return file_priv->minor->type == DRM_MINOR_CONTROL;
-}
-
int drm_open(struct inode *inode, struct file *filp);
ssize_t drm_read(struct file *filp, char __user *buffer,
size_t count, loff_t *offset);
* This is equivalent to callers with the SYSADMIN capability.
*/
DRM_ROOT_ONLY = BIT(2),
- /**
- * @DRM_CONTROL_ALLOW:
- *
- * Deprecated, do not use. Control nodes are in the process of getting
- * removed.
- */
- DRM_CONTROL_ALLOW = BIT(3),
/**
* @DRM_UNLOCKED:
*
#define DRM_MODE_FLAG_3D_MAX DRM_MODE_FLAG_3D_SIDE_BY_SIDE_HALF
+#define DRM_MODE_MATCH_TIMINGS (1 << 0)
+#define DRM_MODE_MATCH_CLOCK (1 << 1)
+#define DRM_MODE_MATCH_FLAGS (1 << 2)
+#define DRM_MODE_MATCH_3D_FLAGS (1 << 3)
+#define DRM_MODE_MATCH_ASPECT_RATIO (1 << 4)
+
/**
* struct drm_display_mode - DRM kernel-internal display mode structure
* @hdisplay: horizontal display size
* Field for setting the HDMI picture aspect ratio of a mode.
*/
enum hdmi_picture_aspect picture_aspect_ratio;
+
+ /**
+ * @export_head:
+ *
+ * struct list_head for modes to be exposed to the userspace.
+ * This is to maintain a list of exposed modes while preparing
+ * user-mode's list in drm_mode_getconnector ioctl. The purpose of this
+ * list_head only lies in the ioctl function, and is not expected to be
+ * used outside the function.
+ * Once used, the stale pointers are not reset, but left as it is, to
+ * avoid overhead of protecting it by mode_config.mutex.
+ */
+ struct list_head export_head;
};
/**
const struct drm_display_mode *src);
struct drm_display_mode *drm_mode_duplicate(struct drm_device *dev,
const struct drm_display_mode *mode);
+bool drm_mode_match(const struct drm_display_mode *mode1,
+ const struct drm_display_mode *mode2,
+ unsigned int match_flags);
bool drm_mode_equal(const struct drm_display_mode *mode1,
const struct drm_display_mode *mode2);
bool drm_mode_equal_no_clocks(const struct drm_display_mode *mode1,
uint32_t type);
struct drm_property *drm_property_create_bool(struct drm_device *dev,
u32 flags, const char *name);
-int drm_property_add_enum(struct drm_property *property, int index,
+int drm_property_add_enum(struct drm_property *property,
uint64_t value, const char *name);
void drm_property_destroy(struct drm_device *dev, struct drm_property *property);
bool drm_rect_intersect(struct drm_rect *r, const struct drm_rect *clip);
bool drm_rect_clip_scaled(struct drm_rect *src, struct drm_rect *dst,
- const struct drm_rect *clip,
- int hscale, int vscale);
+ const struct drm_rect *clip);
int drm_rect_calc_hscale(const struct drm_rect *src,
const struct drm_rect *dst,
int min_hscale, int max_hscale);
struct dma_fence_cb *cb);
/**
- * struct dma_fence_cb - callback for dma_fence_add_callback
- * @node: used by dma_fence_add_callback to append this struct to fence::cb_list
+ * struct dma_fence_cb - callback for dma_fence_add_callback()
+ * @node: used by dma_fence_add_callback() to append this struct to fence::cb_list
* @func: dma_fence_func_t to call
*
- * This struct will be initialized by dma_fence_add_callback, additional
+ * This struct will be initialized by dma_fence_add_callback(), additional
* data can be passed along by embedding dma_fence_cb in another struct.
*/
struct dma_fence_cb {
/**
* struct dma_fence_ops - operations implemented for fence
- * @get_driver_name: returns the driver name.
- * @get_timeline_name: return the name of the context this fence belongs to.
- * @enable_signaling: enable software signaling of fence.
- * @signaled: [optional] peek whether the fence is signaled, can be null.
- * @wait: custom wait implementation, or dma_fence_default_wait.
- * @release: [optional] called on destruction of fence, can be null
- * @fill_driver_data: [optional] callback to fill in free-form debug info
- * Returns amount of bytes filled, or -errno.
- * @fence_value_str: [optional] fills in the value of the fence as a string
- * @timeline_value_str: [optional] fills in the current value of the timeline
- * as a string
*
- * Notes on enable_signaling:
- * For fence implementations that have the capability for hw->hw
- * signaling, they can implement this op to enable the necessary
- * irqs, or insert commands into cmdstream, etc. This is called
- * in the first wait() or add_callback() path to let the fence
- * implementation know that there is another driver waiting on
- * the signal (ie. hw->sw case).
- *
- * This function can be called from atomic context, but not
- * from irq context, so normal spinlocks can be used.
- *
- * A return value of false indicates the fence already passed,
- * or some failure occurred that made it impossible to enable
- * signaling. True indicates successful enabling.
- *
- * fence->error may be set in enable_signaling, but only when false is
- * returned.
- *
- * Calling dma_fence_signal before enable_signaling is called allows
- * for a tiny race window in which enable_signaling is called during,
- * before, or after dma_fence_signal. To fight this, it is recommended
- * that before enable_signaling returns true an extra reference is
- * taken on the fence, to be released when the fence is signaled.
- * This will mean dma_fence_signal will still be called twice, but
- * the second time will be a noop since it was already signaled.
- *
- * Notes on signaled:
- * May set fence->error if returning true.
- *
- * Notes on wait:
- * Must not be NULL, set to dma_fence_default_wait for default implementation.
- * the dma_fence_default_wait implementation should work for any fence, as long
- * as enable_signaling works correctly.
- *
- * Must return -ERESTARTSYS if the wait is intr = true and the wait was
- * interrupted, and remaining jiffies if fence has signaled, or 0 if wait
- * timed out. Can also return other error values on custom implementations,
- * which should be treated as if the fence is signaled. For example a hardware
- * lockup could be reported like that.
- *
- * Notes on release:
- * Can be NULL, this function allows additional commands to run on
- * destruction of the fence. Can be called from irq context.
- * If pointer is set to NULL, kfree will get called instead.
*/
-
struct dma_fence_ops {
+ /**
+ * @get_driver_name:
+ *
+ * Returns the driver name. This is a callback to allow drivers to
+ * compute the name at runtime, without having it to store permanently
+ * for each fence, or build a cache of some sort.
+ *
+ * This callback is mandatory.
+ */
const char * (*get_driver_name)(struct dma_fence *fence);
+
+ /**
+ * @get_timeline_name:
+ *
+ * Return the name of the context this fence belongs to. This is a
+ * callback to allow drivers to compute the name at runtime, without
+ * having it to store permanently for each fence, or build a cache of
+ * some sort.
+ *
+ * This callback is mandatory.
+ */
const char * (*get_timeline_name)(struct dma_fence *fence);
+
+ /**
+ * @enable_signaling:
+ *
+ * Enable software signaling of fence.
+ *
+ * For fence implementations that have the capability for hw->hw
+ * signaling, they can implement this op to enable the necessary
+ * interrupts, or insert commands into cmdstream, etc, to avoid these
+ * costly operations for the common case where only hw->hw
+ * synchronization is required. This is called in the first
+ * dma_fence_wait() or dma_fence_add_callback() path to let the fence
+ * implementation know that there is another driver waiting on the
+ * signal (ie. hw->sw case).
+ *
+ * This function can be called from atomic context, but not
+ * from irq context, so normal spinlocks can be used.
+ *
+ * A return value of false indicates the fence already passed,
+ * or some failure occurred that made it impossible to enable
+ * signaling. True indicates successful enabling.
+ *
+ * &dma_fence.error may be set in enable_signaling, but only when false
+ * is returned.
+ *
+ * Since many implementations can call dma_fence_signal() even when before
+ * @enable_signaling has been called there's a race window, where the
+ * dma_fence_signal() might result in the final fence reference being
+ * released and its memory freed. To avoid this, implementations of this
+ * callback should grab their own reference using dma_fence_get(), to be
+ * released when the fence is signalled (through e.g. the interrupt
+ * handler).
+ *
+ * This callback is mandatory.
+ */
bool (*enable_signaling)(struct dma_fence *fence);
+
+ /**
+ * @signaled:
+ *
+ * Peek whether the fence is signaled, as a fastpath optimization for
+ * e.g. dma_fence_wait() or dma_fence_add_callback(). Note that this
+ * callback does not need to make any guarantees beyond that a fence
+ * once indicates as signalled must always return true from this
+ * callback. This callback may return false even if the fence has
+ * completed already, in this case information hasn't propogated throug
+ * the system yet. See also dma_fence_is_signaled().
+ *
+ * May set &dma_fence.error if returning true.
+ *
+ * This callback is optional.
+ */
bool (*signaled)(struct dma_fence *fence);
+
+ /**
+ * @wait:
+ *
+ * Custom wait implementation, or dma_fence_default_wait.
+ *
+ * Must not be NULL, set to dma_fence_default_wait for default implementation.
+ * the dma_fence_default_wait implementation should work for any fence, as long
+ * as enable_signaling works correctly.
+ *
+ * Must return -ERESTARTSYS if the wait is intr = true and the wait was
+ * interrupted, and remaining jiffies if fence has signaled, or 0 if wait
+ * timed out. Can also return other error values on custom implementations,
+ * which should be treated as if the fence is signaled. For example a hardware
+ * lockup could be reported like that.
+ *
+ * This callback is mandatory.
+ */
signed long (*wait)(struct dma_fence *fence,
bool intr, signed long timeout);
+
+ /**
+ * @release:
+ *
+ * Called on destruction of fence to release additional resources.
+ * Can be called from irq context. This callback is optional. If it is
+ * NULL, then dma_fence_free() is instead called as the default
+ * implementation.
+ */
void (*release)(struct dma_fence *fence);
+ /**
+ * @fill_driver_data:
+ *
+ * Callback to fill in free-form debug info.
+ *
+ * Returns amount of bytes filled, or negative error on failure.
+ *
+ * This callback is optional.
+ */
int (*fill_driver_data)(struct dma_fence *fence, void *data, int size);
+
+ /**
+ * @fence_value_str:
+ *
+ * Callback to fill in free-form debug info specific to this fence, like
+ * the sequence number.
+ *
+ * This callback is optional.
+ */
void (*fence_value_str)(struct dma_fence *fence, char *str, int size);
+
+ /**
+ * @timeline_value_str:
+ *
+ * Fills in the current value of the timeline as a string, like the
+ * sequence number. This should match what @fill_driver_data prints for
+ * the most recently signalled fence (assuming no delayed signalling).
+ */
void (*timeline_value_str)(struct dma_fence *fence,
char *str, int size);
};
/**
* dma_fence_put - decreases refcount of the fence
- * @fence: [in] fence to reduce refcount of
+ * @fence: fence to reduce refcount of
*/
static inline void dma_fence_put(struct dma_fence *fence)
{
/**
* dma_fence_get - increases refcount of the fence
- * @fence: [in] fence to increase refcount of
+ * @fence: fence to increase refcount of
*
* Returns the same fence, with refcount increased by 1.
*/
/**
* dma_fence_get_rcu - get a fence from a reservation_object_list with
* rcu read lock
- * @fence: [in] fence to increase refcount of
+ * @fence: fence to increase refcount of
*
* Function returns NULL if no refcount could be obtained, or the fence.
*/
/**
* dma_fence_get_rcu_safe - acquire a reference to an RCU tracked fence
- * @fencep: [in] pointer to fence to increase refcount of
+ * @fencep: pointer to fence to increase refcount of
*
* Function returns NULL if no refcount could be obtained, or the fence.
* This function handles acquiring a reference to a fence that may be
/**
* dma_fence_is_signaled_locked - Return an indication if the fence
* is signaled yet.
- * @fence: [in] the fence to check
+ * @fence: the fence to check
*
* Returns true if the fence was already signaled, false if not. Since this
* function doesn't enable signaling, it is not guaranteed to ever return
- * true if dma_fence_add_callback, dma_fence_wait or
- * dma_fence_enable_sw_signaling haven't been called before.
+ * true if dma_fence_add_callback(), dma_fence_wait() or
+ * dma_fence_enable_sw_signaling() haven't been called before.
*
- * This function requires fence->lock to be held.
+ * This function requires &dma_fence.lock to be held.
+ *
+ * See also dma_fence_is_signaled().
*/
static inline bool
dma_fence_is_signaled_locked(struct dma_fence *fence)
/**
* dma_fence_is_signaled - Return an indication if the fence is signaled yet.
- * @fence: [in] the fence to check
+ * @fence: the fence to check
*
* Returns true if the fence was already signaled, false if not. Since this
* function doesn't enable signaling, it is not guaranteed to ever return
- * true if dma_fence_add_callback, dma_fence_wait or
- * dma_fence_enable_sw_signaling haven't been called before.
+ * true if dma_fence_add_callback(), dma_fence_wait() or
+ * dma_fence_enable_sw_signaling() haven't been called before.
*
* It's recommended for seqno fences to call dma_fence_signal when the
* operation is complete, it makes it possible to prevent issues from
* wraparound between time of issue and time of use by checking the return
* value of this function before calling hardware-specific wait instructions.
+ *
+ * See also dma_fence_is_signaled_locked().
*/
static inline bool
dma_fence_is_signaled(struct dma_fence *fence)
/**
* __dma_fence_is_later - return if f1 is chronologically later than f2
- * @f1: [in] the first fence's seqno
- * @f2: [in] the second fence's seqno from the same context
+ * @f1: the first fence's seqno
+ * @f2: the second fence's seqno from the same context
*
* Returns true if f1 is chronologically later than f2. Both fences must be
* from the same context, since a seqno is not common across contexts.
/**
* dma_fence_is_later - return if f1 is chronologically later than f2
- * @f1: [in] the first fence from the same context
- * @f2: [in] the second fence from the same context
+ * @f1: the first fence from the same context
+ * @f2: the second fence from the same context
*
* Returns true if f1 is chronologically later than f2. Both fences must be
* from the same context, since a seqno is not re-used across contexts.
/**
* dma_fence_later - return the chronologically later fence
- * @f1: [in] the first fence from the same context
- * @f2: [in] the second fence from the same context
+ * @f1: the first fence from the same context
+ * @f2: the second fence from the same context
*
* Returns NULL if both fences are signaled, otherwise the fence that would be
* signaled last. Both fences must be from the same context, since a seqno is
/**
* dma_fence_get_status_locked - returns the status upon completion
- * @fence: [in] the dma_fence to query
+ * @fence: the dma_fence to query
*
* Drivers can supply an optional error status condition before they signal
* the fence (to indicate whether the fence was completed due to an error
/**
* dma_fence_set_error - flag an error condition on the fence
- * @fence: [in] the dma_fence
- * @error: [in] the error to store
+ * @fence: the dma_fence
+ * @error: the error to store
*
* Drivers can supply an optional error status condition before they signal
* the fence, to indicate that the fence was completed due to an error
/**
* dma_fence_wait - sleep until the fence gets signaled
- * @fence: [in] the fence to wait on
- * @intr: [in] if true, do an interruptible wait
+ * @fence: the fence to wait on
+ * @intr: if true, do an interruptible wait
*
* This function will return -ERESTARTSYS if interrupted by a signal,
* or 0 if the fence was signaled. Other error values may be
* Performs a synchronous wait on this fence. It is assumed the caller
* directly or indirectly holds a reference to the fence, otherwise the
* fence might be freed before return, resulting in undefined behavior.
+ *
+ * See also dma_fence_wait_timeout() and dma_fence_wait_any_timeout().
*/
static inline signed long dma_fence_wait(struct dma_fence *fence, bool intr)
{
*/
#define DRM_CLIENT_CAP_ATOMIC 3
+/**
+ * DRM_CLIENT_CAP_ASPECT_RATIO
+ *
+ * If set to 1, the DRM core will provide aspect ratio information in modes.
+ */
+#define DRM_CLIENT_CAP_ASPECT_RATIO 4
+
/** DRM_IOCTL_SET_CLIENT_CAP ioctl argument type */
struct drm_set_client_cap {
__u64 capability;
#define DRM_MODE_PICTURE_ASPECT_NONE 0
#define DRM_MODE_PICTURE_ASPECT_4_3 1
#define DRM_MODE_PICTURE_ASPECT_16_9 2
+#define DRM_MODE_PICTURE_ASPECT_64_27 3
+#define DRM_MODE_PICTURE_ASPECT_256_135 4
/* Aspect ratio flag bitmask (4 bits 22:19) */
#define DRM_MODE_FLAG_PIC_AR_MASK (0x0F<<19)
(DRM_MODE_PICTURE_ASPECT_4_3<<19)
#define DRM_MODE_FLAG_PIC_AR_16_9 \
(DRM_MODE_PICTURE_ASPECT_16_9<<19)
+#define DRM_MODE_FLAG_PIC_AR_64_27 \
+ (DRM_MODE_PICTURE_ASPECT_64_27<<19)
+#define DRM_MODE_FLAG_PIC_AR_256_135 \
+ (DRM_MODE_PICTURE_ASPECT_256_135<<19)
#define DRM_MODE_FLAG_ALL (DRM_MODE_FLAG_PHSYNC | \
DRM_MODE_FLAG_NHSYNC | \
--- /dev/null
+/*
+ * Copyright © 2014-2018 Broadcom
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ */
+
+#ifndef _V3D_DRM_H_
+#define _V3D_DRM_H_
+
+#include "drm.h"
+
+#if defined(__cplusplus)
+extern "C" {
+#endif
+
+#define DRM_V3D_SUBMIT_CL 0x00
+#define DRM_V3D_WAIT_BO 0x01
+#define DRM_V3D_CREATE_BO 0x02
+#define DRM_V3D_MMAP_BO 0x03
+#define DRM_V3D_GET_PARAM 0x04
+#define DRM_V3D_GET_BO_OFFSET 0x05
+
+#define DRM_IOCTL_V3D_SUBMIT_CL DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_SUBMIT_CL, struct drm_v3d_submit_cl)
+#define DRM_IOCTL_V3D_WAIT_BO DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_WAIT_BO, struct drm_v3d_wait_bo)
+#define DRM_IOCTL_V3D_CREATE_BO DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_CREATE_BO, struct drm_v3d_create_bo)
+#define DRM_IOCTL_V3D_MMAP_BO DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_MMAP_BO, struct drm_v3d_mmap_bo)
+#define DRM_IOCTL_V3D_GET_PARAM DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_GET_PARAM, struct drm_v3d_get_param)
+#define DRM_IOCTL_V3D_GET_BO_OFFSET DRM_IOWR(DRM_COMMAND_BASE + DRM_V3D_GET_BO_OFFSET, struct drm_v3d_get_bo_offset)
+
+/**
+ * struct drm_v3d_submit_cl - ioctl argument for submitting commands to the 3D
+ * engine.
+ *
+ * This asks the kernel to have the GPU execute an optional binner
+ * command list, and a render command list.
+ */
+struct drm_v3d_submit_cl {
+ /* Pointer to the binner command list.
+ *
+ * This is the first set of commands executed, which runs the
+ * coordinate shader to determine where primitives land on the screen,
+ * then writes out the state updates and draw calls necessary per tile
+ * to the tile allocation BO.
+ */
+ __u32 bcl_start;
+
+ /** End address of the BCL (first byte after the BCL) */
+ __u32 bcl_end;
+
+ /* Offset of the render command list.
+ *
+ * This is the second set of commands executed, which will either
+ * execute the tiles that have been set up by the BCL, or a fixed set
+ * of tiles (in the case of RCL-only blits).
+ */
+ __u32 rcl_start;
+
+ /** End address of the RCL (first byte after the RCL) */
+ __u32 rcl_end;
+
+ /** An optional sync object to wait on before starting the BCL. */
+ __u32 in_sync_bcl;
+ /** An optional sync object to wait on before starting the RCL. */
+ __u32 in_sync_rcl;
+ /** An optional sync object to place the completion fence in. */
+ __u32 out_sync;
+
+ /* Offset of the tile alloc memory
+ *
+ * This is optional on V3D 3.3 (where the CL can set the value) but
+ * required on V3D 4.1.
+ */
+ __u32 qma;
+
+ /** Size of the tile alloc memory. */
+ __u32 qms;
+
+ /** Offset of the tile state data array. */
+ __u32 qts;
+
+ /* Pointer to a u32 array of the BOs that are referenced by the job.
+ */
+ __u64 bo_handles;
+
+ /* Number of BO handles passed in (size is that times 4). */
+ __u32 bo_handle_count;
+
+ /* Pad, must be zero-filled. */
+ __u32 pad;
+};
+
+/**
+ * struct drm_v3d_wait_bo - ioctl argument for waiting for
+ * completion of the last DRM_V3D_SUBMIT_CL on a BO.
+ *
+ * This is useful for cases where multiple processes might be
+ * rendering to a BO and you want to wait for all rendering to be
+ * completed.
+ */
+struct drm_v3d_wait_bo {
+ __u32 handle;
+ __u32 pad;
+ __u64 timeout_ns;
+};
+
+/**
+ * struct drm_v3d_create_bo - ioctl argument for creating V3D BOs.
+ *
+ * There are currently no values for the flags argument, but it may be
+ * used in a future extension.
+ */
+struct drm_v3d_create_bo {
+ __u32 size;
+ __u32 flags;
+ /** Returned GEM handle for the BO. */
+ __u32 handle;
+ /**
+ * Returned offset for the BO in the V3D address space. This offset
+ * is private to the DRM fd and is valid for the lifetime of the GEM
+ * handle.
+ *
+ * This offset value will always be nonzero, since various HW
+ * units treat 0 specially.
+ */
+ __u32 offset;
+};
+
+/**
+ * struct drm_v3d_mmap_bo - ioctl argument for mapping V3D BOs.
+ *
+ * This doesn't actually perform an mmap. Instead, it returns the
+ * offset you need to use in an mmap on the DRM device node. This
+ * means that tools like valgrind end up knowing about the mapped
+ * memory.
+ *
+ * There are currently no values for the flags argument, but it may be
+ * used in a future extension.
+ */
+struct drm_v3d_mmap_bo {
+ /** Handle for the object being mapped. */
+ __u32 handle;
+ __u32 flags;
+ /** offset into the drm node to use for subsequent mmap call. */
+ __u64 offset;
+};
+
+enum drm_v3d_param {
+ DRM_V3D_PARAM_V3D_UIFCFG,
+ DRM_V3D_PARAM_V3D_HUB_IDENT1,
+ DRM_V3D_PARAM_V3D_HUB_IDENT2,
+ DRM_V3D_PARAM_V3D_HUB_IDENT3,
+ DRM_V3D_PARAM_V3D_CORE0_IDENT0,
+ DRM_V3D_PARAM_V3D_CORE0_IDENT1,
+ DRM_V3D_PARAM_V3D_CORE0_IDENT2,
+};
+
+struct drm_v3d_get_param {
+ __u32 param;
+ __u32 pad;
+ __u64 value;
+};
+
+/**
+ * Returns the offset for the BO in the V3D address space for this DRM fd.
+ * This is the same value returned by drm_v3d_create_bo, if that was called
+ * from this DRM fd.
+ */
+struct drm_v3d_get_bo_offset {
+ __u32 handle;
+ __u32 offset;
+};
+
+#if defined(__cplusplus)
+}
+#endif
+
+#endif /* _V3D_DRM_H_ */
/* ID of the perfmon to attach to this job. 0 means no perfmon. */
__u32 perfmonid;
- /* Unused field to align this struct on 64 bits. Must be set to 0.
- * If one ever needs to add an u32 field to this struct, this field
- * can be used.
+ /* Syncobj handle to wait on. If set, processing of this render job
+ * will not start until the syncobj is signaled. 0 means ignore.
*/
+ __u32 in_sync;
+
+ /* Syncobj handle to export fence to. If set, the fence in the syncobj
+ * will be replaced with a fence that signals upon completion of this
+ * render job. 0 means ignore.
+ */
+ __u32 out_sync;
+
__u32 pad2;
};
projects / linux-2.6-block.git / commitdiff