net: phy: bcm7xxx: Modified to use global core register defines

Modified the bcm7xxx phy driver to remove local core register
defines and use the common ones from "include/linux/brcmphy.h"

Signed-off-by: Arun Parameswaran <arunp@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c
index efa31a655eb179b69c273bf01c787ed93ab163c9..03d4809a91268f26766d03e62bc7d3ff4ebde5b9 100644 (file)
--- a/drivers/net/phy/bcm7xxx.c
+++ b/drivers/net/phy/bcm7xxx.c
@@ -25,7 +25,6 @@
 #define MII_BCM7XXX_100TX_DISC         0x14
 #define MII_BCM7XXX_AUX_MODE           0x1d
 #define  MII_BCM7XX_64CLK_MDIO         BIT(12)
-#define MII_BCM7XXX_CORE_BASE1E                0x1e
 #define MII_BCM7XXX_TEST               0x1f
 #define  MII_BCM7XXX_SHD_MODE_2                BIT(2)
 
@@ -46,8 +45,6 @@
 #define AFE_VDAC_OTHERS_0              MISC_ADDR(0x39, 3)
 #define AFE_HPF_TRIM_OTHERS            MISC_ADDR(0x3a, 0)
 
-#define CORE_EXPB0                     0xb0
-
 static void r_rc_cal_reset(struct phy_device *phydev)
 {
        /* Reset R_CAL/RC_CAL Engine */
@@ -76,7 +73,7 @@ static int bcm7xxx_28nm_b0_afe_config_init(struct phy_device *phydev)
        bcm_phy_write_misc(phydev, DSP_TAP10, 0x690b);
 
        /* Switch to CORE_BASE1E */
-       phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0xd);
+       phy_write(phydev, MII_BRCM_CORE_BASE1E, 0xd);
 
        r_rc_cal_reset(phydev);
 
@@ -127,7 +124,7 @@ static int bcm7xxx_28nm_d0_afe_config_init(struct phy_device *phydev)
        bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
 
        /* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */
-       phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010);
+       phy_write(phydev, MII_BRCM_CORE_BASE1E, 0x0010);
 
        /* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */
        bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b);
@@ -155,7 +152,7 @@ static int bcm7xxx_28nm_e0_plus_afe_config_init(struct phy_device *phydev)
        bcm_phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x00e3);
 
        /* CORE_BASE1E, force trim to overwrite and set I_ext trim to 0000 */
-       phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0x0010);
+       phy_write(phydev, MII_BRCM_CORE_BASE1E, 0x0010);
 
        /* DSP_TAP10, adjust bias current trim (+0% swing, +0 tick) */
        bcm_phy_write_misc(phydev, DSP_TAP10, 0x011b);