net: phy: Broadcom Cygnus internal Etherent PHY driver
authorArun Parameswaran <arunp@broadcom.com>
Tue, 6 Oct 2015 19:25:49 +0000 (12:25 -0700)
committerDavid S. Miller <davem@davemloft.net>
Thu, 8 Oct 2015 11:45:52 +0000 (04:45 -0700)
Add support for the Broadcom Cygnus SoCs internal PHY's.
The PHYs are 1000M/100M/10M capable with support for 'EEE'
and 'APD' (Auto Power Down).

This driver supports the following Broadcom Cygnus SoCs:
 - BCM583XX (BCM58300, BCM58302, BCM58303, BCM58305)
 - BCM113XX (BCM11300, BCM11320, BCM11350, BCM11360)

The PHY's on these SoC's require some workarounds for
stable operation, both during configuration time and
during suspend/resume. This driver handles the
application of the workarounds.

Signed-off-by: Arun Parameswaran <arunp@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/phy/Kconfig
drivers/net/phy/Makefile
drivers/net/phy/bcm-cygnus.c [new file with mode: 0644]
include/linux/brcmphy.h

index 606fdc9247689c2c036ebe0f89a85c83331d4971..9d097ae54fb2aaa7cab5040dcb1008920079f49f 100644 (file)
@@ -79,6 +79,19 @@ config BROADCOM_PHY
          Currently supports the BCM5411, BCM5421, BCM5461, BCM54616S, BCM5464,
          BCM5481 and BCM5482 PHYs.
 
+config BCM_CYGNUS_PHY
+       tristate "Drivers for Broadcom Cygnus SoC internal PHY"
+       depends on ARCH_BCM_CYGNUS || COMPILE_TEST
+       depends on MDIO_BCM_IPROC
+       select BCM_NET_PHYLIB
+       ---help---
+         This PHY driver is for the 1G internal PHYs of the Broadcom
+         Cygnus Family SoC.
+
+         Currently supports internal PHY's used in the BCM11300,
+         BCM11320, BCM11350, BCM11360, BCM58300, BCM58302,
+         BCM58303 & BCM58305 Broadcom Cygnus SoCs.
+
 config BCM63XX_PHY
        tristate "Drivers for Broadcom 63xx SOCs internal PHY"
        depends on BCM63XX
index 6932475a1a8a162ccfe4a161bded2094886ca4c0..7655d47ad8d8198dd0f141d64e7e2e0f20f6f58f 100644 (file)
@@ -17,6 +17,7 @@ obj-$(CONFIG_BROADCOM_PHY)    += broadcom.o
 obj-$(CONFIG_BCM63XX_PHY)      += bcm63xx.o
 obj-$(CONFIG_BCM7XXX_PHY)      += bcm7xxx.o
 obj-$(CONFIG_BCM87XX_PHY)      += bcm87xx.o
+obj-$(CONFIG_BCM_CYGNUS_PHY)   += bcm-cygnus.o
 obj-$(CONFIG_ICPLUS_PHY)       += icplus.o
 obj-$(CONFIG_REALTEK_PHY)      += realtek.o
 obj-$(CONFIG_LSI_ET1011C_PHY)  += et1011c.o
diff --git a/drivers/net/phy/bcm-cygnus.c b/drivers/net/phy/bcm-cygnus.c
new file mode 100644 (file)
index 0000000..49bbc68
--- /dev/null
@@ -0,0 +1,158 @@
+/*
+ * Copyright (C) 2015 Broadcom Corporation
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation version 2.
+ *
+ * This program is distributed "as is" WITHOUT ANY WARRANTY of any
+ * kind, whether express or implied; without even the implied warranty
+ * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/* Broadcom Cygnus SoC internal transceivers support. */
+#include "bcm-phy-lib.h"
+#include <linux/brcmphy.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/phy.h>
+
+/* Broadcom Cygnus Phy specific registers */
+#define MII_BCM_CYGNUS_AFE_VDAC_ICTRL_0  0x91E5 /* VDAL Control register */
+
+static int bcm_cygnus_afe_config(struct phy_device *phydev)
+{
+       int rc;
+
+       /* ensure smdspclk is enabled */
+       rc = phy_write(phydev, MII_BCM54XX_AUX_CTL, 0x0c30);
+       if (rc < 0)
+               return rc;
+
+       /* AFE_VDAC_ICTRL_0 bit 7:4 Iq=1100 for 1g 10bt, normal modes */
+       rc = bcm_phy_write_misc(phydev, 0x39, 0x01, 0xA7C8);
+       if (rc < 0)
+               return rc;
+
+       /* AFE_HPF_TRIM_OTHERS bit11=1, short cascode enable for all modes*/
+       rc = bcm_phy_write_misc(phydev, 0x3A, 0x00, 0x0803);
+       if (rc < 0)
+               return rc;
+
+       /* AFE_TX_CONFIG_1 bit 7:4 Iq=1100 for test modes */
+       rc = bcm_phy_write_misc(phydev, 0x3A, 0x01, 0xA740);
+       if (rc < 0)
+               return rc;
+
+       /* AFE TEMPSEN_OTHERS rcal_HT, rcal_LT 10000 */
+       rc = bcm_phy_write_misc(phydev, 0x3A, 0x03, 0x8400);
+       if (rc < 0)
+               return rc;
+
+       /* AFE_FUTURE_RSV bit 2:0 rccal <2:0>=100 */
+       rc = bcm_phy_write_misc(phydev, 0x3B, 0x00, 0x0004);
+       if (rc < 0)
+               return rc;
+
+       /* Adjust bias current trim to overcome digital offSet */
+       rc = phy_write(phydev, MII_BRCM_CORE_BASE1E, 0x02);
+       if (rc < 0)
+               return rc;
+
+       /* make rcal=100, since rdb default is 000 */
+       rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB1, 0x10);
+       if (rc < 0)
+               return rc;
+
+       /* CORE_EXPB0, Reset R_CAL/RC_CAL Engine */
+       rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB0, 0x10);
+       if (rc < 0)
+               return rc;
+
+       /* CORE_EXPB0, Disable Reset R_CAL/RC_CAL Engine */
+       rc = bcm_phy_write_exp(phydev, MII_BRCM_CORE_EXPB0, 0x00);
+
+       return 0;
+}
+
+static int bcm_cygnus_config_init(struct phy_device *phydev)
+{
+       int reg, rc;
+
+       reg = phy_read(phydev, MII_BCM54XX_ECR);
+       if (reg < 0)
+               return reg;
+
+       /* Mask interrupts globally. */
+       reg |= MII_BCM54XX_ECR_IM;
+       rc = phy_write(phydev, MII_BCM54XX_ECR, reg);
+       if (rc)
+               return rc;
+
+       /* Unmask events of interest */
+       reg = ~(MII_BCM54XX_INT_DUPLEX |
+               MII_BCM54XX_INT_SPEED |
+               MII_BCM54XX_INT_LINK);
+       rc = phy_write(phydev, MII_BCM54XX_IMR, reg);
+       if (rc)
+               return rc;
+
+       /* Apply AFE settings for the PHY */
+       rc = bcm_cygnus_afe_config(phydev);
+       if (rc)
+               return rc;
+
+       /* Advertise EEE */
+       rc = bcm_phy_enable_eee(phydev);
+       if (rc)
+               return rc;
+
+       /* Enable APD */
+       return bcm_phy_enable_apd(phydev, false);
+}
+
+static int bcm_cygnus_resume(struct phy_device *phydev)
+{
+       int rc;
+
+       genphy_resume(phydev);
+
+       /* Re-initialize the PHY to apply AFE work-arounds and
+        * configurations when coming out of suspend.
+        */
+       rc = bcm_cygnus_config_init(phydev);
+       if (rc)
+               return rc;
+
+       /* restart auto negotiation with the new settings */
+       return genphy_config_aneg(phydev);
+}
+
+static struct phy_driver bcm_cygnus_phy_driver[] = {
+{
+       .phy_id        = PHY_ID_BCM_CYGNUS,
+       .phy_id_mask   = 0xfffffff0,
+       .name          = "Broadcom Cygnus PHY",
+       .features      = PHY_GBIT_FEATURES |
+                       SUPPORTED_Pause | SUPPORTED_Asym_Pause,
+       .config_init   = bcm_cygnus_config_init,
+       .config_aneg   = genphy_config_aneg,
+       .read_status   = genphy_read_status,
+       .ack_interrupt = bcm_phy_ack_intr,
+       .config_intr   = bcm_phy_config_intr,
+       .suspend       = genphy_suspend,
+       .resume        = bcm_cygnus_resume,
+} };
+
+static struct mdio_device_id __maybe_unused bcm_cygnus_phy_tbl[] = {
+       { PHY_ID_BCM_CYGNUS, 0xfffffff0, },
+       { }
+};
+MODULE_DEVICE_TABLE(mdio, bcm_cygnus_phy_tbl);
+
+module_phy_driver(bcm_cygnus_phy_driver);
+
+MODULE_DESCRIPTION("Broadcom Cygnus internal PHY driver");
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Broadcom Corporation");
index 6a53ab91407c3db4522b1afef7baf1d3ba8f5e42..59f4a73044199aa4fdafbd7e67578f3c000fd527 100644 (file)
@@ -30,6 +30,8 @@
 #define PHY_ID_BCM7439_2               0xae025080
 #define PHY_ID_BCM7445                 0x600d8510
 
+#define PHY_ID_BCM_CYGNUS              0xae025200
+
 #define PHY_BCM_OUI_MASK               0xfffffc00
 #define PHY_BCM_OUI_1                  0x00206000
 #define PHY_BCM_OUI_2                  0x0143bc00
 #define LPI_FEATURE_EN                 0x8000
 #define LPI_FEATURE_EN_DIG1000X                0x4000
 
+/* Core register definitions*/
+#define MII_BRCM_CORE_BASE1E   0x1E
+#define MII_BRCM_CORE_EXPB0    0xB0
+#define MII_BRCM_CORE_EXPB1    0xB1
+
 #endif /* _LINUX_BRCMPHY_H */