&BTRFS_I(inode)->runtime_flags);
}
+/*
+ * Make sure we do not end up inserting an inline extent into a file that has
+ * already other (non-inline) extents. If a file has an inline extent it can
+ * not have any other extents and the (single) inline extent must start at the
+ * file offset 0. Failing to respect these rules will lead to file corruption,
+ * resulting in EIO errors on read/write operations, hitting BUG_ON's in mm, etc
+ *
+ * We can have extents that have been already written to disk or we can have
+ * dirty ranges still in delalloc, in which case the extent maps and items are
+ * created only when we run delalloc, and the delalloc ranges might fall outside
+ * the range we are currently locking in the inode's io tree. So we check the
+ * inode's i_size because of that (i_size updates are done while holding the
+ * i_mutex, which we are holding here).
+ * We also check to see if the inode has a size not greater than "datal" but has
+ * extents beyond it, due to an fallocate with FALLOC_FL_KEEP_SIZE (and we are
+ * protected against such concurrent fallocate calls by the i_mutex).
+ *
+ * If the file has no extents but a size greater than datal, do not allow the
+ * copy because we would need turn the inline extent into a non-inline one (even
+ * with NO_HOLES enabled). If we find our destination inode only has one inline
+ * extent, just overwrite it with the source inline extent if its size is less
+ * than the source extent's size, or we could copy the source inline extent's
+ * data into the destination inode's inline extent if the later is greater then
+ * the former.
+ */
+static int clone_copy_inline_extent(struct inode *src,
+ struct inode *dst,
+ struct btrfs_trans_handle *trans,
+ struct btrfs_path *path,
+ struct btrfs_key *new_key,
+ const u64 drop_start,
+ const u64 datal,
+ const u64 skip,
+ const u64 size,
+ char *inline_data)
+{
+ struct btrfs_root *root = BTRFS_I(dst)->root;
+ const u64 aligned_end = ALIGN(new_key->offset + datal,
+ root->sectorsize);
+ int ret;
+ struct btrfs_key key;
+
+ if (new_key->offset > 0)
+ return -EOPNOTSUPP;
+
+ key.objectid = btrfs_ino(dst);
+ key.type = BTRFS_EXTENT_DATA_KEY;
+ key.offset = 0;
+ ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+ if (ret < 0) {
+ return ret;
+ } else if (ret > 0) {
+ if (path->slots[0] >= btrfs_header_nritems(path->nodes[0])) {
+ ret = btrfs_next_leaf(root, path);
+ if (ret < 0)
+ return ret;
+ else if (ret > 0)
+ goto copy_inline_extent;
+ }
+ btrfs_item_key_to_cpu(path->nodes[0], &key, path->slots[0]);
+ if (key.objectid == btrfs_ino(dst) &&
+ key.type == BTRFS_EXTENT_DATA_KEY) {
+ ASSERT(key.offset > 0);
+ return -EOPNOTSUPP;
+ }
+ } else if (i_size_read(dst) <= datal) {
+ struct btrfs_file_extent_item *ei;
+ u64 ext_len;
+
+ /*
+ * If the file size is <= datal, make sure there are no other
+ * extents following (can happen do to an fallocate call with
+ * the flag FALLOC_FL_KEEP_SIZE).
+ */
+ ei = btrfs_item_ptr(path->nodes[0], path->slots[0],
+ struct btrfs_file_extent_item);
+ /*
+ * If it's an inline extent, it can not have other extents
+ * following it.
+ */
+ if (btrfs_file_extent_type(path->nodes[0], ei) ==
+ BTRFS_FILE_EXTENT_INLINE)
+ goto copy_inline_extent;
+
+ ext_len = btrfs_file_extent_num_bytes(path->nodes[0], ei);
+ if (ext_len > aligned_end)
+ return -EOPNOTSUPP;
+
+ ret = btrfs_next_item(root, path);
+ if (ret < 0) {
+ return ret;
+ } else if (ret == 0) {
+ btrfs_item_key_to_cpu(path->nodes[0], &key,
+ path->slots[0]);
+ if (key.objectid == btrfs_ino(dst) &&
+ key.type == BTRFS_EXTENT_DATA_KEY)
+ return -EOPNOTSUPP;
+ }
+ }
+
+copy_inline_extent:
+ /*
+ * We have no extent items, or we have an extent at offset 0 which may
+ * or may not be inlined. All these cases are dealt the same way.
+ */
+ if (i_size_read(dst) > datal) {
+ /*
+ * If the destination inode has an inline extent...
+ * This would require copying the data from the source inline
+ * extent into the beginning of the destination's inline extent.
+ * But this is really complex, both extents can be compressed
+ * or just one of them, which would require decompressing and
+ * re-compressing data (which could increase the new compressed
+ * size, not allowing the compressed data to fit anymore in an
+ * inline extent).
+ * So just don't support this case for now (it should be rare,
+ * we are not really saving space when cloning inline extents).
+ */
+ return -EOPNOTSUPP;
+ }
+
+ btrfs_release_path(path);
+ ret = btrfs_drop_extents(trans, root, dst, drop_start, aligned_end, 1);
+ if (ret)
+ return ret;
+ ret = btrfs_insert_empty_item(trans, root, path, new_key, size);
+ if (ret)
+ return ret;
+
+ if (skip) {
+ const u32 start = btrfs_file_extent_calc_inline_size(0);
+
+ memmove(inline_data + start, inline_data + start + skip, datal);
+ }
+
+ write_extent_buffer(path->nodes[0], inline_data,
+ btrfs_item_ptr_offset(path->nodes[0],
+ path->slots[0]),
+ size);
+ inode_add_bytes(dst, datal);
+
+ return 0;
+}
+
/**
* btrfs_clone() - clone a range from inode file to another
*
} else if (type == BTRFS_FILE_EXTENT_INLINE) {
u64 skip = 0;
u64 trim = 0;
- u64 aligned_end = 0;
-
- /*
- * Don't copy an inline extent into an offset
- * greater than zero. Having an inline extent
- * at such an offset results in chaos as btrfs
- * isn't prepared for such cases. Just skip
- * this case for the same reasons as commented
- * at btrfs_ioctl_clone().
- */
- if (last_dest_end > 0) {
- ret = -EOPNOTSUPP;
- btrfs_end_transaction(trans, root);
- goto out;
- }
if (off > key.offset) {
skip = off - key.offset;
size -= skip + trim;
datal -= skip + trim;
- aligned_end = ALIGN(new_key.offset + datal,
- root->sectorsize);
- ret = btrfs_drop_extents(trans, root, inode,
- drop_start,
- aligned_end,
- 1);
+ ret = clone_copy_inline_extent(src, inode,
+ trans, path,
+ &new_key,
+ drop_start,
+ datal,
+ skip, size, buf);
if (ret) {
if (ret != -EOPNOTSUPP)
btrfs_abort_transaction(trans,
- root, ret);
- btrfs_end_transaction(trans, root);
- goto out;
- }
-
- ret = btrfs_insert_empty_item(trans, root, path,
- &new_key, size);
- if (ret) {
- btrfs_abort_transaction(trans, root,
- ret);
+ root,
+ ret);
btrfs_end_transaction(trans, root);
goto out;
}
-
- if (skip) {
- u32 start =
- btrfs_file_extent_calc_inline_size(0);
- memmove(buf+start, buf+start+skip,
- datal);
- }
-
leaf = path->nodes[0];
slot = path->slots[0];
- write_extent_buffer(leaf, buf,
- btrfs_item_ptr_offset(leaf, slot),
- size);
- inode_add_bytes(inode, datal);
}
/* If we have an implicit hole (NO_HOLES feature). */