qlcnic: Support for GBE port settings
authorSony Chacko <sony.chacko@qlogic.com>
Thu, 28 Apr 2011 11:48:19 +0000 (11:48 +0000)
committerDavid S. Miller <davem@davemloft.net>
Fri, 29 Apr 2011 20:00:00 +0000 (13:00 -0700)
Enable setting speed and auto negotiation parameters for GbE ports.
Hardware do not support half duplex setting currently.

o Update driver version to 5.0.17.

Signed-off-by: Sony Chacko <sony.chacko@qlogic.com>
Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/qlcnic/qlcnic.h
drivers/net/qlcnic/qlcnic_ctx.c
drivers/net/qlcnic/qlcnic_ethtool.c

index 1934ed9a1aad4d5396e5daeddc15c51f86a97593..f729363b3fc3dedb79e9a9e2e68323b85d9f3bf5 100644 (file)
@@ -36,8 +36,8 @@
 
 #define _QLCNIC_LINUX_MAJOR 5
 #define _QLCNIC_LINUX_MINOR 0
-#define _QLCNIC_LINUX_SUBVERSION 16
-#define QLCNIC_LINUX_VERSIONID  "5.0.16"
+#define _QLCNIC_LINUX_SUBVERSION 17
+#define QLCNIC_LINUX_VERSIONID  "5.0.17"
 #define QLCNIC_DRV_IDC_VER  0x01
 #define QLCNIC_DRIVER_VERSION  ((_QLCNIC_LINUX_MAJOR << 16) |\
                 (_QLCNIC_LINUX_MINOR << 8) | (_QLCNIC_LINUX_SUBVERSION))
@@ -573,8 +573,10 @@ struct qlcnic_recv_context {
 #define QLCNIC_CDRP_CMD_CONFIGURE_ESWITCH      0x00000028
 #define QLCNIC_CDRP_CMD_GET_ESWITCH_PORT_CONFIG        0x00000029
 #define QLCNIC_CDRP_CMD_GET_ESWITCH_STATS      0x0000002a
+#define QLCNIC_CDRP_CMD_CONFIG_PORT            0x0000002E
 
 #define QLCNIC_RCODE_SUCCESS           0
+#define QLCNIC_RCODE_NOT_SUPPORTED     9
 #define QLCNIC_RCODE_TIMEOUT           17
 #define QLCNIC_DESTROY_CTX_RESET       0
 
@@ -1155,8 +1157,7 @@ struct qlcnic_esw_statistics {
        struct __qlcnic_esw_statistics tx;
 };
 
-int qlcnic_fw_cmd_query_phy(struct qlcnic_adapter *adapter, u32 reg, u32 *val);
-int qlcnic_fw_cmd_set_phy(struct qlcnic_adapter *adapter, u32 reg, u32 val);
+int qlcnic_fw_cmd_set_port(struct qlcnic_adapter *adapter, u32 config);
 
 u32 qlcnic_hw_read_wx_2M(struct qlcnic_adapter *adapter, ulong off);
 int qlcnic_hw_write_wx_2M(struct qlcnic_adapter *, ulong off, u32 data);
index 050fa5a99ff7e65ee354ef3b1dc53d81d3142865..3a99886e4736444620a18c4fe6ecb3db386cf0cc 100644 (file)
@@ -359,33 +359,15 @@ qlcnic_fw_cmd_destroy_tx_ctx(struct qlcnic_adapter *adapter)
 }
 
 int
-qlcnic_fw_cmd_query_phy(struct qlcnic_adapter *adapter, u32 reg, u32 *val)
-{
-
-       if (qlcnic_issue_cmd(adapter,
-                       adapter->ahw->pci_func,
-                       adapter->fw_hal_version,
-                       reg,
-                       0,
-                       0,
-                       QLCNIC_CDRP_CMD_READ_PHY)) {
-
-               return -EIO;
-       }
-
-       return QLCRD32(adapter, QLCNIC_ARG1_CRB_OFFSET);
-}
-
-int
-qlcnic_fw_cmd_set_phy(struct qlcnic_adapter *adapter, u32 reg, u32 val)
+qlcnic_fw_cmd_set_port(struct qlcnic_adapter *adapter, u32 config)
 {
        return qlcnic_issue_cmd(adapter,
                        adapter->ahw->pci_func,
                        adapter->fw_hal_version,
-                       reg,
-                       val,
+                       config,
+                       0,
                        0,
-                       QLCNIC_CDRP_CMD_WRITE_PHY);
+                       QLCNIC_CDRP_CMD_CONFIG_PORT);
 }
 
 int qlcnic_alloc_hw_resources(struct qlcnic_adapter *adapter)
index 8db1d1983cfe3f6fae7f305850128bea39d66b81..27726ebfba2aeb26a05fd2db7435265707fccef4 100644 (file)
@@ -284,50 +284,44 @@ skip:
 static int
 qlcnic_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
 {
+       u32 config = 0;
+       u32 ret = 0;
        struct qlcnic_adapter *adapter = netdev_priv(dev);
-       __u32 status;
+
+       if (adapter->ahw->port_type != QLCNIC_GBE)
+               return -EOPNOTSUPP;
 
        /* read which mode */
-       if (adapter->ahw->port_type == QLCNIC_GBE) {
-               /* autonegotiation */
-               if (qlcnic_fw_cmd_set_phy(adapter,
-                              QLCNIC_NIU_GB_MII_MGMT_ADDR_AUTONEG,
-                              ecmd->autoneg) != 0)
-                       return -EIO;
-               else
-                       adapter->link_autoneg = ecmd->autoneg;
+       if (ecmd->duplex)
+               config |= 0x1;
 
-               if (qlcnic_fw_cmd_query_phy(adapter,
-                             QLCNIC_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
-                             &status) != 0)
-                       return -EIO;
+       if (ecmd->autoneg)
+               config |= 0x2;
 
-               switch (ecmd->speed) {
-               case SPEED_10:
-                       qlcnic_set_phy_speed(status, 0);
-                       break;
-               case SPEED_100:
-                       qlcnic_set_phy_speed(status, 1);
-                       break;
-               case SPEED_1000:
-                       qlcnic_set_phy_speed(status, 2);
-                       break;
-               }
+       switch (ethtool_cmd_speed(ecmd)) {
+       case SPEED_10:
+               config |= (0 << 8);
+               break;
+       case SPEED_100:
+               config |= (1 << 8);
+               break;
+       case SPEED_1000:
+               config |= (10 << 8);
+               break;
+       default:
+               return -EIO;
+       }
 
-               if (ecmd->duplex == DUPLEX_HALF)
-                       qlcnic_clear_phy_duplex(status);
-               if (ecmd->duplex == DUPLEX_FULL)
-                       qlcnic_set_phy_duplex(status);
-               if (qlcnic_fw_cmd_set_phy(adapter,
-                              QLCNIC_NIU_GB_MII_MGMT_ADDR_PHY_STATUS,
-                              *((int *)&status)) != 0)
-                       return -EIO;
-               else {
-                       adapter->link_speed = ecmd->speed;
-                       adapter->link_duplex = ecmd->duplex;
-               }
-       } else
+       ret = qlcnic_fw_cmd_set_port(adapter, config);
+
+       if (ret == QLCNIC_RCODE_NOT_SUPPORTED)
                return -EOPNOTSUPP;
+       else if (ret)
+               return -EIO;
+
+       adapter->link_speed = ethtool_cmd_speed(ecmd);
+       adapter->link_duplex = ecmd->duplex;
+       adapter->link_autoneg = ecmd->autoneg;
 
        if (!netif_running(dev))
                return 0;