mfd: hi655x: Fix regmap area declared size for hi655x
authorRafael David Tinoco <rafael.tinoco@linaro.org>
Fri, 6 Jul 2018 17:28:33 +0000 (14:28 -0300)
committerLee Jones <lee.jones@linaro.org>
Fri, 27 Jul 2018 07:13:25 +0000 (08:13 +0100)
Fixes https://bugs.linaro.org/show_bug.cgi?id=3903

LTP Functional tests have caused a bad paging request when triggering
the regmap_read_debugfs() logic of the device PMIC Hi6553 (reading
regmap/f8000000.pmic/registers file during read_all test):

Unable to handle kernel paging request at virtual address ffff0
[ffff00000984e000] pgd=0000000077ffe803, pud=0000000077ffd803,0
Internal error: Oops: 96000007 [#1] SMP
...
Hardware name: HiKey Development Board (DT)
...
Call trace:
 regmap_mmio_read8+0x24/0x40
 regmap_mmio_read+0x48/0x70
 _regmap_bus_reg_read+0x38/0x48
 _regmap_read+0x68/0x170
 regmap_read+0x50/0x78
 regmap_read_debugfs+0x1a0/0x308
 regmap_map_read_file+0x48/0x58
 full_proxy_read+0x68/0x98
 __vfs_read+0x48/0x80
 vfs_read+0x94/0x150
 SyS_read+0x6c/0xd8
 el0_svc_naked+0x30/0x34
Code: aa1e03e0 d503201f f9400280 8b334000 (39400000)

Investigations have showed that, when triggered by debugfs read()
handler, the mmio regmap logic was reading a bigger (16k) register area
than the one mapped by devm_ioremap_resource() during hi655x-pmic probe
time (4k).

This commit changes hi655x's max register, according to HW specs, to be
the same as the one declared in the pmic device in hi6220's dts, fixing
the issue.

Cc: <stable@vger.kernel.org> #v4.9 #v4.14 #v4.16 #v4.17
Signed-off-by: Rafael David Tinoco <rafael.tinoco@linaro.org>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
drivers/mfd/hi655x-pmic.c

index c37ccbfd52f2a14be65c0008b96697f55029698c..96c07fa1802adcce7d48f971410096b4b2a4f479 100644 (file)
@@ -49,7 +49,7 @@ static struct regmap_config hi655x_regmap_config = {
        .reg_bits = 32,
        .reg_stride = HI655X_STRIDE,
        .val_bits = 8,
-       .max_register = HI655X_BUS_ADDR(0xFFF),
+       .max_register = HI655X_BUS_ADDR(0x400) - HI655X_STRIDE,
 };
 
 static struct resource pwrkey_resources[] = {