W1: feature, enable hardware strong pullup
authorDavid Fries <david@fries.net>
Thu, 16 Oct 2008 05:04:42 +0000 (22:04 -0700)
committerLinus Torvalds <torvalds@linux-foundation.org>
Thu, 16 Oct 2008 18:21:49 +0000 (11:21 -0700)
Add a strong pullup option to the w1 system.  This supplies extra power
for parasite powered devices.  There is a w1_master_pullup sysfs entry and
enable_pullup module parameter to enable or disable the strong pullup.

The one wire bus requires at a minimum one wire and ground.  The common
wire is used for sending and receiving data as well as supplying power to
devices that are parasite powered of which temperature sensors can be one
example.  The bus must be idle and left high while a temperature
conversion is in progress, in addition the normal pullup resister on
larger networks or even higher temperatures might not supply enough power.
 The pullup resister can't provide too much pullup current, because
devices need to pull the bus down to write a value.  This enables the
strong pullup for supported hardware, which can supply more current when
requested.  Unsupported hardware will just delay with the bus high.

The hardware USB 2490 one wire bus master has a bit on some commands which
will enable the strong pullup as soon as the command finishes executing.
To use strong pullup, call the new w1_next_pullup function to register the
duration.  The next write command will call set_pullup before sending the
data, and reset the duration to zero once it returns.

Switched from simple_strtol to strict_strtol.

Signed-off-by: David Fries <david@fries.net>
Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
drivers/w1/w1.c
drivers/w1/w1.h
drivers/w1/w1_int.c
drivers/w1/w1_io.c

index 9b5c11701c374d50636eb23f975caac16a4b65b8..32418d4e555a0add94001c8c8d2a4db8b19308aa 100644 (file)
@@ -246,10 +246,14 @@ static ssize_t w1_master_attribute_store_search(struct device * dev,
                                                struct device_attribute *attr,
                                                const char * buf, size_t count)
 {
+       long tmp;
        struct w1_master *md = dev_to_w1_master(dev);
 
+       if (strict_strtol(buf, 0, &tmp) == -EINVAL)
+               return -EINVAL;
+
        mutex_lock(&md->mutex);
-       md->search_count = simple_strtol(buf, NULL, 0);
+       md->search_count = tmp;
        mutex_unlock(&md->mutex);
        wake_up_process(md->thread);
 
@@ -270,6 +274,38 @@ static ssize_t w1_master_attribute_show_search(struct device *dev,
        return count;
 }
 
+static ssize_t w1_master_attribute_store_pullup(struct device *dev,
+                                               struct device_attribute *attr,
+                                               const char *buf, size_t count)
+{
+       long tmp;
+       struct w1_master *md = dev_to_w1_master(dev);
+
+       if (strict_strtol(buf, 0, &tmp) == -EINVAL)
+               return -EINVAL;
+
+       mutex_lock(&md->mutex);
+       md->enable_pullup = tmp;
+       mutex_unlock(&md->mutex);
+       wake_up_process(md->thread);
+
+       return count;
+}
+
+static ssize_t w1_master_attribute_show_pullup(struct device *dev,
+                                              struct device_attribute *attr,
+                                              char *buf)
+{
+       struct w1_master *md = dev_to_w1_master(dev);
+       ssize_t count;
+
+       mutex_lock(&md->mutex);
+       count = sprintf(buf, "%d\n", md->enable_pullup);
+       mutex_unlock(&md->mutex);
+
+       return count;
+}
+
 static ssize_t w1_master_attribute_show_pointer(struct device *dev, struct device_attribute *attr, char *buf)
 {
        struct w1_master *md = dev_to_w1_master(dev);
@@ -365,6 +401,7 @@ static W1_MASTER_ATTR_RO(attempts, S_IRUGO);
 static W1_MASTER_ATTR_RO(timeout, S_IRUGO);
 static W1_MASTER_ATTR_RO(pointer, S_IRUGO);
 static W1_MASTER_ATTR_RW(search, S_IRUGO | S_IWUGO);
+static W1_MASTER_ATTR_RW(pullup, S_IRUGO | S_IWUGO);
 
 static struct attribute *w1_master_default_attrs[] = {
        &w1_master_attribute_name.attr,
@@ -375,6 +412,7 @@ static struct attribute *w1_master_default_attrs[] = {
        &w1_master_attribute_timeout.attr,
        &w1_master_attribute_pointer.attr,
        &w1_master_attribute_search.attr,
+       &w1_master_attribute_pullup.attr,
        NULL
 };
 
index 34ee01e008adf19a7501e719cc590b5edc9c597a..00b84ab22808e32fcfed046cbddfa6f11fa379a2 100644 (file)
@@ -142,6 +142,12 @@ struct w1_bus_master
         */
        u8              (*reset_bus)(void *);
 
+       /**
+        * Put out a strong pull-up pulse of the specified duration.
+        * @return -1=Error, 0=completed
+        */
+       u8              (*set_pullup)(void *, int);
+
        /** Really nice hardware can handles the different types of ROM search
         *  w1_master* is passed to the slave found callback.
         */
@@ -167,6 +173,11 @@ struct w1_master
        void                    *priv;
        int                     priv_size;
 
+       /** 5V strong pullup enabled flag, 1 enabled, zero disabled. */
+       int                     enable_pullup;
+       /** 5V strong pullup duration in milliseconds, zero disabled. */
+       int                     pullup_duration;
+
        struct task_struct      *thread;
        struct mutex            mutex;
 
@@ -201,6 +212,7 @@ u8 w1_calc_crc8(u8 *, int);
 void w1_write_block(struct w1_master *, const u8 *, int);
 u8 w1_read_block(struct w1_master *, u8 *, int);
 int w1_reset_select_slave(struct w1_slave *sl);
+void w1_next_pullup(struct w1_master *, int);
 
 static inline struct w1_slave* dev_to_w1_slave(struct device *dev)
 {
index bd877b24ce421ba4ef6a5357571cdc818fb00a50..9d723efdf91543f9a7d650ae37e5662e137845e4 100644 (file)
@@ -31,6 +31,9 @@
 
 static u32 w1_ids = 1;
 
+static int w1_enable_pullup = 1;
+module_param_named(enable_pullup, w1_enable_pullup, int, 0);
+
 static struct w1_master * w1_alloc_dev(u32 id, int slave_count, int slave_ttl,
                                       struct device_driver *driver,
                                       struct device *device)
@@ -59,6 +62,7 @@ static struct w1_master * w1_alloc_dev(u32 id, int slave_count, int slave_ttl,
        dev->initialized        = 0;
        dev->id                 = id;
        dev->slave_ttl          = slave_ttl;
+       dev->enable_pullup      = w1_enable_pullup;
         dev->search_count      = -1; /* continual scan */
 
        /* 1 for w1_process to decrement
@@ -107,6 +111,18 @@ int w1_add_master_device(struct w1_bus_master *master)
                printk(KERN_ERR "w1_add_master_device: invalid function set\n");
                return(-EINVAL);
         }
+       /* While it would be electrically possible to make a device that
+        * generated a strong pullup in bit bang mode, only hardare that
+        * controls 1-wire time frames are even expected to support a strong
+        * pullup.  w1_io.c would need to support calling set_pullup before
+        * the last write_bit operation of a w1_write_8 which it currently
+        * doesn't.
+        */
+       if (!master->write_byte && !master->touch_bit && master->set_pullup) {
+               printk(KERN_ERR "w1_add_master_device: set_pullup requires "
+                       "write_byte or touch_bit, disabling\n");
+               master->set_pullup = NULL;
+       }
 
        dev = w1_alloc_dev(w1_ids++, w1_max_slave_count, w1_max_slave_ttl, &w1_master_driver, &w1_master_device);
        if (!dev)
index 0056ef69009b8fb7a387daf7bca8e785ee75de69..97b338a16abc2b57acd2764d5cadcc1279a3684f 100644 (file)
@@ -92,6 +92,40 @@ static void w1_write_bit(struct w1_master *dev, int bit)
        }
 }
 
+/**
+ * Pre-write operation, currently only supporting strong pullups.
+ * Program the hardware for a strong pullup, if one has been requested and
+ * the hardware supports it.
+ *
+ * @param dev     the master device
+ */
+static void w1_pre_write(struct w1_master *dev)
+{
+       if (dev->pullup_duration &&
+               dev->enable_pullup && dev->bus_master->set_pullup) {
+               dev->bus_master->set_pullup(dev->bus_master->data,
+                       dev->pullup_duration);
+       }
+}
+
+/**
+ * Post-write operation, currently only supporting strong pullups.
+ * If a strong pullup was requested, clear it if the hardware supports
+ * them, or execute the delay otherwise, in either case clear the request.
+ *
+ * @param dev     the master device
+ */
+static void w1_post_write(struct w1_master *dev)
+{
+       if (dev->pullup_duration) {
+               if (dev->enable_pullup && dev->bus_master->set_pullup)
+                       dev->bus_master->set_pullup(dev->bus_master->data, 0);
+               else
+                       msleep(dev->pullup_duration);
+               dev->pullup_duration = 0;
+       }
+}
+
 /**
  * Writes 8 bits.
  *
@@ -102,11 +136,17 @@ void w1_write_8(struct w1_master *dev, u8 byte)
 {
        int i;
 
-       if (dev->bus_master->write_byte)
+       if (dev->bus_master->write_byte) {
+               w1_pre_write(dev);
                dev->bus_master->write_byte(dev->bus_master->data, byte);
+       }
        else
-               for (i = 0; i < 8; ++i)
+               for (i = 0; i < 8; ++i) {
+                       if (i == 7)
+                               w1_pre_write(dev);
                        w1_touch_bit(dev, (byte >> i) & 0x1);
+               }
+       w1_post_write(dev);
 }
 EXPORT_SYMBOL_GPL(w1_write_8);
 
@@ -203,11 +243,14 @@ void w1_write_block(struct w1_master *dev, const u8 *buf, int len)
 {
        int i;
 
-       if (dev->bus_master->write_block)
+       if (dev->bus_master->write_block) {
+               w1_pre_write(dev);
                dev->bus_master->write_block(dev->bus_master->data, buf, len);
+       }
        else
                for (i = 0; i < len; ++i)
-                       w1_write_8(dev, buf[i]);
+                       w1_write_8(dev, buf[i]); /* calls w1_pre_write */
+       w1_post_write(dev);
 }
 EXPORT_SYMBOL_GPL(w1_write_block);
 
@@ -306,3 +349,20 @@ int w1_reset_select_slave(struct w1_slave *sl)
        return 0;
 }
 EXPORT_SYMBOL_GPL(w1_reset_select_slave);
+
+/**
+ * Put out a strong pull-up of the specified duration after the next write
+ * operation.  Not all hardware supports strong pullups.  Hardware that
+ * doesn't support strong pullups will sleep for the given time after the
+ * write operation without a strong pullup.  This is a one shot request for
+ * the next write, specifying zero will clear a previous request.
+ * The w1 master lock must be held.
+ *
+ * @param delay        time in milliseconds
+ * @return     0=success, anything else=error
+ */
+void w1_next_pullup(struct w1_master *dev, int delay)
+{
+       dev->pullup_duration = delay;
+}
+EXPORT_SYMBOL_GPL(w1_next_pullup);