* 'x86-vdso-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86: move rdtsc_barrier() into the TSC vread method
--- /dev/null
+What: /sys/devices/system/cpu/cpu*/cache/index*/cache_disable_X
+Date: August 2008
+KernelVersion: 2.6.27
+Contact: mark.langsdorf@amd.com
+Description: These files exist in every cpu's cache index directories.
+ There are currently 2 cache_disable_# files in each
+ directory. Reading from these files on a supported
+ processor will return that cache disable index value
+ for that processor and node. Writing to one of these
+ files will cause the specificed cache index to be disabled.
+
+ Currently, only AMD Family 10h Processors support cache index
+ disable, and only for their L3 caches. See the BIOS and
+ Kernel Developer's Guide at
+ http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/31116-Public-GH-BKDG_3.20_2-4-09.pdf
+ for formatting information and other details on the
+ cache index disable.
+Users: joachim.deguara@amd.com
Unit: revolution/min (RPM)
RW
+fan[1-*]_max Fan maximum value
+ Unit: revolution/min (RPM)
+ Only rarely supported by the hardware.
+ RW
+
fan[1-*]_input Fan input value.
Unit: revolution/min (RPM)
RO
in[0-*]_min_alarm
in[0-*]_max_alarm
fan[1-*]_min_alarm
+fan[1-*]_max_alarm
temp[1-*]_min_alarm
temp[1-*]_max_alarm
temp[1-*]_crit_alarm
Anonymous finger details are sent sequentially as separate packets of ABS
events. Only the ABS_MT events are recognized as part of a finger
packet. The end of a packet is marked by calling the input_mt_sync()
-function, which generates a SYN_MT_REPORT event. The end of multi-touch
-transfer is marked by calling the usual input_sync() function.
+function, which generates a SYN_MT_REPORT event. This instructs the
+receiver to accept the data for the current finger and prepare to receive
+another. The end of a multi-touch transfer is marked by calling the usual
+input_sync() function. This instructs the receiver to act upon events
+accumulated since last EV_SYN/SYN_REPORT and prepare to receive a new
+set of events/packets.
A set of ABS_MT events with the desired properties is defined. The events
are divided into categories, to allow for partial implementation. The
ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the
device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
of the approaching finger. Anisotropy and direction may be specified with
-ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with
-more granular information may specify general shapes as blobs, i.e., as a
-sequence of rectangular shapes grouped together by an
-ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify
-whether the touching tool is a finger or a pen or something else.
+ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. The
+ABS_MT_TOOL_TYPE may be used to specify whether the touching tool is a
+finger or a pen or something else. Devices with more granular information
+may specify general shapes as blobs, i.e., as a sequence of rectangular
+shapes grouped together by an ABS_MT_BLOB_ID. Finally, for the few devices
+that currently support it, the ABS_MT_TRACKING_ID event may be used to
+report finger tracking from hardware [5].
+
+Here is what a minimal event sequence for a two-finger touch would look
+like:
+
+ ABS_MT_TOUCH_MAJOR
+ ABS_MT_POSITION_X
+ ABS_MT_POSITION_Y
+ SYN_MT_REPORT
+ ABS_MT_TOUCH_MAJOR
+ ABS_MT_POSITION_X
+ ABS_MT_POSITION_Y
+ SYN_MT_REPORT
+ SYN_REPORT
Event Semantics
The length of the major axis of the contact. The length should be given in
surface units. If the surface has an X times Y resolution, the largest
-possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal.
+possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal [4].
ABS_MT_TOUCH_MINOR
The length, in surface units, of the minor axis of the contact. If the
-contact is circular, this event can be omitted.
+contact is circular, this event can be omitted [4].
ABS_MT_WIDTH_MAJOR
The length, in surface units, of the major axis of the approaching
tool. This should be understood as the size of the tool itself. The
orientation of the contact and the approaching tool are assumed to be the
-same.
+same [4].
ABS_MT_WIDTH_MINOR
The length, in surface units, of the minor axis of the approaching
-tool. Omit if circular.
+tool. Omit if circular [4].
The above four values can be used to derive additional information about
the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
ABS_MT_ORIENTATION
-The orientation of the ellipse. The value should describe half a revolution
-clockwise around the touch center. The scale of the value is arbitrary, but
-zero should be returned for an ellipse aligned along the Y axis of the
-surface. As an example, an index finger placed straight onto the axis could
-return zero orientation, something negative when twisted to the left, and
-something positive when twisted to the right. This value can be omitted if
-the touching object is circular, or if the information is not available in
-the kernel driver.
+The orientation of the ellipse. The value should describe a signed quarter
+of a revolution clockwise around the touch center. The signed value range
+is arbitrary, but zero should be returned for a finger aligned along the Y
+axis of the surface, a negative value when finger is turned to the left, and
+a positive value when finger turned to the right. When completely aligned with
+the X axis, the range max should be returned. Orientation can be omitted
+if the touching object is circular, or if the information is not available
+in the kernel driver. Partial orientation support is possible if the device
+can distinguish between the two axis, but not (uniquely) any values in
+between. In such cases, the range of ABS_MT_ORIENTATION should be [0, 1]
+[4].
ABS_MT_POSITION_X
The BLOB_ID groups several packets together into one arbitrarily shaped
contact. This is a low-level anonymous grouping, and should not be confused
-with the high-level contactID, explained below. Most kernel drivers will
-not have this capability, and can safely omit the event.
+with the high-level trackingID [5]. Most kernel drivers will not have blob
+capability, and can safely omit the event.
+
+ABS_MT_TRACKING_ID
+
+The TRACKING_ID identifies an initiated contact throughout its life cycle
+[5]. There are currently only a few devices that support it, so this event
+should normally be omitted.
+
+
+Event Computation
+-----------------
+
+The flora of different hardware unavoidably leads to some devices fitting
+better to the MT protocol than others. To simplify and unify the mapping,
+this section gives recipes for how to compute certain events.
+
+For devices reporting contacts as rectangular shapes, signed orientation
+cannot be obtained. Assuming X and Y are the lengths of the sides of the
+touching rectangle, here is a simple formula that retains the most
+information possible:
+
+ ABS_MT_TOUCH_MAJOR := max(X, Y)
+ ABS_MT_TOUCH_MINOR := min(X, Y)
+ ABS_MT_ORIENTATION := bool(X > Y)
+
+The range of ABS_MT_ORIENTATION should be set to [0, 1], to indicate that
+the device can distinguish between a finger along the Y axis (0) and a
+finger along the X axis (1).
Finger Tracking
anonymous contacts currently on the surface. The order in which the packets
appear in the event stream is not important.
-The process of finger tracking, i.e., to assign a unique contactID to each
+The process of finger tracking, i.e., to assign a unique trackingID to each
initiated contact on the surface, is left to user space; preferably the
-multi-touch X driver [3]. In that driver, the contactID stays the same and
+multi-touch X driver [3]. In that driver, the trackingID stays the same and
unique until the contact vanishes (when the finger leaves the surface). The
problem of assigning a set of anonymous fingers to a set of identified
fingers is a euclidian bipartite matching problem at each event update, and
relies on a sufficiently rapid update rate.
+There are a few devices that support trackingID in hardware. User space can
+make use of these native identifiers to reduce bandwidth and cpu usage.
+
+
Notes
-----
time of writing (April 2009), the MT protocol is not yet merged, and the
prototype implements finger matching, basic mouse support and two-finger
scrolling. The project aims at improving the quality of current multi-touch
-functionality available in the synaptics X driver, and in addition
+functionality available in the Synaptics X driver, and in addition
implement more advanced gestures.
+[4] See the section on event computation.
+[5] See the section on finger tracking.
noinitrd [RAM] Tells the kernel not to load any configured
initial RAM disk.
+ nointremap [X86-64, Intel-IOMMU] Do not enable interrupt
+ remapping.
+
nointroute [IA-64]
nojitter [IA64] Disables jitter checking for ITC timers.
- Locking functions.
- Interrupt disabling functions.
+ - Sleep and wake-up functions.
- Miscellaneous functions.
(*) Inter-CPU locking barrier effects.
other means.
+SLEEP AND WAKE-UP FUNCTIONS
+---------------------------
+
+Sleeping and waking on an event flagged in global data can be viewed as an
+interaction between two pieces of data: the task state of the task waiting for
+the event and the global data used to indicate the event. To make sure that
+these appear to happen in the right order, the primitives to begin the process
+of going to sleep, and the primitives to initiate a wake up imply certain
+barriers.
+
+Firstly, the sleeper normally follows something like this sequence of events:
+
+ for (;;) {
+ set_current_state(TASK_UNINTERRUPTIBLE);
+ if (event_indicated)
+ break;
+ schedule();
+ }
+
+A general memory barrier is interpolated automatically by set_current_state()
+after it has altered the task state:
+
+ CPU 1
+ ===============================
+ set_current_state();
+ set_mb();
+ STORE current->state
+ <general barrier>
+ LOAD event_indicated
+
+set_current_state() may be wrapped by:
+
+ prepare_to_wait();
+ prepare_to_wait_exclusive();
+
+which therefore also imply a general memory barrier after setting the state.
+The whole sequence above is available in various canned forms, all of which
+interpolate the memory barrier in the right place:
+
+ wait_event();
+ wait_event_interruptible();
+ wait_event_interruptible_exclusive();
+ wait_event_interruptible_timeout();
+ wait_event_killable();
+ wait_event_timeout();
+ wait_on_bit();
+ wait_on_bit_lock();
+
+
+Secondly, code that performs a wake up normally follows something like this:
+
+ event_indicated = 1;
+ wake_up(&event_wait_queue);
+
+or:
+
+ event_indicated = 1;
+ wake_up_process(event_daemon);
+
+A write memory barrier is implied by wake_up() and co. if and only if they wake
+something up. The barrier occurs before the task state is cleared, and so sits
+between the STORE to indicate the event and the STORE to set TASK_RUNNING:
+
+ CPU 1 CPU 2
+ =============================== ===============================
+ set_current_state(); STORE event_indicated
+ set_mb(); wake_up();
+ STORE current->state <write barrier>
+ <general barrier> STORE current->state
+ LOAD event_indicated
+
+The available waker functions include:
+
+ complete();
+ wake_up();
+ wake_up_all();
+ wake_up_bit();
+ wake_up_interruptible();
+ wake_up_interruptible_all();
+ wake_up_interruptible_nr();
+ wake_up_interruptible_poll();
+ wake_up_interruptible_sync();
+ wake_up_interruptible_sync_poll();
+ wake_up_locked();
+ wake_up_locked_poll();
+ wake_up_nr();
+ wake_up_poll();
+ wake_up_process();
+
+
+[!] Note that the memory barriers implied by the sleeper and the waker do _not_
+order multiple stores before the wake-up with respect to loads of those stored
+values after the sleeper has called set_current_state(). For instance, if the
+sleeper does:
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (event_indicated)
+ break;
+ __set_current_state(TASK_RUNNING);
+ do_something(my_data);
+
+and the waker does:
+
+ my_data = value;
+ event_indicated = 1;
+ wake_up(&event_wait_queue);
+
+there's no guarantee that the change to event_indicated will be perceived by
+the sleeper as coming after the change to my_data. In such a circumstance, the
+code on both sides must interpolate its own memory barriers between the
+separate data accesses. Thus the above sleeper ought to do:
+
+ set_current_state(TASK_INTERRUPTIBLE);
+ if (event_indicated) {
+ smp_rmb();
+ do_something(my_data);
+ }
+
+and the waker should do:
+
+ my_data = value;
+ smp_wmb();
+ event_indicated = 1;
+ wake_up(&event_wait_queue);
+
+
MISCELLANEOUS FUNCTIONS
-----------------------
Under normal operation, memory operation reordering is generally not going to
be a problem as a single-threaded linear piece of code will still appear to
-work correctly, even if it's in an SMP kernel. There are, however, three
+work correctly, even if it's in an SMP kernel. There are, however, four
circumstances in which reordering definitely _could_ be a problem:
(*) Interprocessor interaction.
CONTENTS
========
+0. WARNING
1. Overview
1.1 The problem
1.2 The solution
3. Future plans
+0. WARNING
+==========
+
+ Fiddling with these settings can result in an unstable system, the knobs are
+ root only and assumes root knows what he is doing.
+
+Most notable:
+
+ * very small values in sched_rt_period_us can result in an unstable
+ system when the period is smaller than either the available hrtimer
+ resolution, or the time it takes to handle the budget refresh itself.
+
+ * very small values in sched_rt_runtime_us can result in an unstable
+ system when the runtime is so small the system has difficulty making
+ forward progress (NOTE: the migration thread and kstopmachine both
+ are real-time processes).
+
1. Overview
===========
Implementing SCHED_EDF might take a while to complete. Priority Inheritance is
the biggest challenge as the current linux PI infrastructure is geared towards
-the limited static priority levels 0-139. With deadline scheduling you need to
+the limited static priority levels 0-99. With deadline scheduling you need to
do deadline inheritance (since priority is inversely proportional to the
deadline delta (deadline - now).
When this value is greater than 1, the driver will show the
stack trace additionally. This may help the debugging.
+ Since 2.6.30, this option also enables the hwptr check using
+ jiffies. This detects spontaneous invalid pointer callback
+ values, but can be lead to too much corrections for a (mostly
+ buggy) hardware that doesn't give smooth pointer updates.
+
card*/pcm*/sub*/info
The general information of this PCM sub-stream.
values starting at 100 (nice -20). Below is a quick chart to map
the kernel priority to user land priorities.
- Kernel priority: 0 to 99 ==> user RT priority 99 to 0
- Kernel priority: 100 to 139 ==> user nice -20 to 19
- Kernel priority: 140 ==> idle task priority
+ Kernel Space User Space
+ ===============================================================
+ 0(high) to 98(low) user RT priority 99(high) to 1(low)
+ with SCHED_RR or SCHED_FIFO
+ ---------------------------------------------------------------
+ 99 sched_priority is not used in scheduling
+ decisions(it must be specified as 0)
+ ---------------------------------------------------------------
+ 100(high) to 139(low) user nice -20(high) to 19(low)
+ ---------------------------------------------------------------
+ 140 idle task priority
+ ---------------------------------------------------------------
The task states are:
Protocol 2.09: (Kernel 2.6.26) Added a field of 64-bit physical
pointer to single linked list of struct setup_data.
+Protocol 2.10: (Kernel 2.6.31) Added a protocol for relaxed alignment
+ beyond the kernel_alignment added, new init_size and
+ pref_address fields. Added extended boot loader IDs.
+
**** MEMORY LAYOUT
The traditional memory map for the kernel loader, used for Image or
021C/4 2.00+ ramdisk_size initrd size (set by boot loader)
0220/4 2.00+ bootsect_kludge DO NOT USE - for bootsect.S use only
0224/2 2.01+ heap_end_ptr Free memory after setup end
-0226/2 N/A pad1 Unused
+0226/1 2.02+(3 ext_loader_ver Extended boot loader version
+0227/1 2.02+(3 ext_loader_type Extended boot loader ID
0228/4 2.02+ cmd_line_ptr 32-bit pointer to the kernel command line
022C/4 2.03+ ramdisk_max Highest legal initrd address
0230/4 2.05+ kernel_alignment Physical addr alignment required for kernel
0234/1 2.05+ relocatable_kernel Whether kernel is relocatable or not
-0235/1 N/A pad2 Unused
+0235/1 2.10+ min_alignment Minimum alignment, as a power of two
0236/2 N/A pad3 Unused
0238/4 2.06+ cmdline_size Maximum size of the kernel command line
023C/4 2.07+ hardware_subarch Hardware subarchitecture
024C/4 2.08+ payload_length Length of kernel payload
0250/8 2.09+ setup_data 64-bit physical pointer to linked list
of struct setup_data
+0258/8 2.10+ pref_address Preferred loading address
+0260/4 2.10+ init_size Linear memory required during initialization
(1) For backwards compatibility, if the setup_sects field contains 0, the
real value is 4.
field are unusable, which means the size of a bzImage kernel
cannot be determined.
+(3) Ignored, but safe to set, for boot protocols 2.02-2.09.
+
If the "HdrS" (0x53726448) magic number is not found at offset 0x202,
the boot protocol version is "old". Loading an old kernel, the
following parameters should be assumed:
0xTV here, where T is an identifier for the boot loader and V is
a version number. Otherwise, enter 0xFF here.
+ For boot loader IDs above T = 0xD, write T = 0xE to this field and
+ write the extended ID minus 0x10 to the ext_loader_type field.
+ Similarly, the ext_loader_ver field can be used to provide more than
+ four bits for the bootloader version.
+
+ For example, for T = 0x15, V = 0x234, write:
+
+ type_of_loader <- 0xE4
+ ext_loader_type <- 0x05
+ ext_loader_ver <- 0x23
+
Assigned boot loader ids:
0 LILO (0x00 reserved for pre-2.00 bootloader)
1 Loadlin
2 bootsect-loader (0x20, all other values reserved)
- 3 SYSLINUX
- 4 EtherBoot
+ 3 Syslinux
+ 4 Etherboot/gPXE
5 ELILO
7 GRUB
- 8 U-BOOT
+ 8 U-Boot
9 Xen
A Gujin
B Qemu
+ C Arcturus Networks uCbootloader
+ E Extended (see ext_loader_type)
+ F Special (0xFF = undefined)
Please contact <hpa@zytor.com> if you need a bootloader ID
value assigned.
Set this field to the offset (from the beginning of the real-mode
code) of the end of the setup stack/heap, minus 0x0200.
+Field name: ext_loader_ver
+Type: write (optional)
+Offset/size: 0x226/1
+Protocol: 2.02+
+
+ This field is used as an extension of the version number in the
+ type_of_loader field. The total version number is considered to be
+ (type_of_loader & 0x0f) + (ext_loader_ver << 4).
+
+ The use of this field is boot loader specific. If not written, it
+ is zero.
+
+ Kernels prior to 2.6.31 did not recognize this field, but it is safe
+ to write for protocol version 2.02 or higher.
+
+Field name: ext_loader_type
+Type: write (obligatory if (type_of_loader & 0xf0) == 0xe0)
+Offset/size: 0x227/1
+Protocol: 2.02+
+
+ This field is used as an extension of the type number in
+ type_of_loader field. If the type in type_of_loader is 0xE, then
+ the actual type is (ext_loader_type + 0x10).
+
+ This field is ignored if the type in type_of_loader is not 0xE.
+
+ Kernels prior to 2.6.31 did not recognize this field, but it is safe
+ to write for protocol version 2.02 or higher.
+
Field name: cmd_line_ptr
Type: write (obligatory)
Offset/size: 0x228/4
0x37FFFFFF, you can start your ramdisk at 0x37FE0000.)
Field name: kernel_alignment
-Type: read (reloc)
+Type: read/modify (reloc)
Offset/size: 0x230/4
-Protocol: 2.05+
+Protocol: 2.05+ (read), 2.10+ (modify)
+
+ Alignment unit required by the kernel (if relocatable_kernel is
+ true.) A relocatable kernel that is loaded at an alignment
+ incompatible with the value in this field will be realigned during
+ kernel initialization.
- Alignment unit required by the kernel (if relocatable_kernel is true.)
+ Starting with protocol version 2.10, this reflects the kernel
+ alignment preferred for optimal performance; it is possible for the
+ loader to modify this field to permit a lesser alignment. See the
+ min_alignment and pref_address field below.
Field name: relocatable_kernel
Type: read (reloc)
After loading, the boot loader must set the code32_start field to
point to the loaded code, or to a boot loader hook.
+Field name: min_alignment
+Type: read (reloc)
+Offset/size: 0x235/1
+Protocol: 2.10+
+
+ This field, if nonzero, indicates as a power of two the minimum
+ alignment required, as opposed to preferred, by the kernel to boot.
+ If a boot loader makes use of this field, it should update the
+ kernel_alignment field with the alignment unit desired; typically:
+
+ kernel_alignment = 1 << min_alignment
+
+ There may be a considerable performance cost with an excessively
+ misaligned kernel. Therefore, a loader should typically try each
+ power-of-two alignment from kernel_alignment down to this alignment.
+
Field name: cmdline_size
Type: read
Offset/size: 0x238/4
sure to consider the case where the linked list already contains
entries.
+Field name: pref_address
+Type: read (reloc)
+Offset/size: 0x258/8
+Protocol: 2.10+
+
+ This field, if nonzero, represents a preferred load address for the
+ kernel. A relocating bootloader should attempt to load at this
+ address if possible.
+
+ A non-relocatable kernel will unconditionally move itself and to run
+ at this address.
+
+Field name: init_size
+Type: read
+Offset/size: 0x25c/4
+
+ This field indicates the amount of linear contiguous memory starting
+ at the kernel runtime start address that the kernel needs before it
+ is capable of examining its memory map. This is not the same thing
+ as the total amount of memory the kernel needs to boot, but it can
+ be used by a relocating boot loader to help select a safe load
+ address for the kernel.
+
+ The kernel runtime start address is determined by the following algorithm:
+
+ if (relocatable_kernel)
+ runtime_start = align_up(load_address, kernel_alignment)
+ else
+ runtime_start = pref_address
+
**** THE IMAGE CHECKSUM
Otherwise, the remaining system RAM is allocated to an
additional node.
- numa=hotadd=percent
- Only allow hotadd memory to preallocate page structures upto
- percent of already available memory.
- numa=hotadd=0 will disable hotadd memory.
-
ACPI
acpi=off Don't enable ACPI
0000000000000000 - 00007fffffffffff (=47 bits) user space, different per mm
hole caused by [48:63] sign extension
ffff800000000000 - ffff80ffffffffff (=40 bits) guard hole
-ffff880000000000 - ffffc0ffffffffff (=57 TB) direct mapping of all phys. memory
-ffffc10000000000 - ffffc1ffffffffff (=40 bits) hole
-ffffc20000000000 - ffffe1ffffffffff (=45 bits) vmalloc/ioremap space
-ffffe20000000000 - ffffe2ffffffffff (=40 bits) virtual memory map (1TB)
+ffff880000000000 - ffffc7ffffffffff (=64 TB) direct mapping of all phys. memory
+ffffc80000000000 - ffffc8ffffffffff (=40 bits) hole
+ffffc90000000000 - ffffe8ffffffffff (=45 bits) vmalloc/ioremap space
+ffffe90000000000 - ffffe9ffffffffff (=40 bits) hole
+ffffea0000000000 - ffffeaffffffffff (=40 bits) virtual memory map (1TB)
... unused hole ...
ffffffff80000000 - ffffffffa0000000 (=512 MB) kernel text mapping, from phys 0
ffffffffa0000000 - fffffffffff00000 (=1536 MB) module mapping space
AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
P: Thomas Dahlmann
-M: thomas.dahlmann@amd.com
+M: dahlmann.thomas@arcor.de
L: linux-geode@lists.infradead.org (moderated for non-subscribers)
S: Supported
F: drivers/usb/gadget/amd5536udc.*
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
T: git git://gitorious.org/linux-gemini/mainline.git
S: Maintained
+F: arch/arm/mach-gemini/
ARM/EBSA110 MACHINE SUPPORT
P: Russell King
M: paulius.zaleckas@teltonika.lt
L: linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
S: Maintained
+F: arch/arm/mm/*-fa*
ARM/FOOTBRIDGE ARCHITECTURE
P: Russell King
F: include/linux/bfs_fs.h
BLACKFIN ARCHITECTURE
-P: Bryan Wu
-M: cooloney@kernel.org
+P: Mike Frysinger
+M: vapier@gentoo.org
L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: arch/blackfin/
BLACKFIN EMAC DRIVER
-P: Bryan Wu
-M: cooloney@kernel.org
-L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+P: Michael Hennerich
+M: michael.hennerich@analog.com
+L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/net/bfin_mac.*
BLACKFIN RTC DRIVER
P: Mike Frysinger
M: vapier.adi@gmail.com
-L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/rtc/rtc-bfin.c
BLACKFIN SERIAL DRIVER
P: Sonic Zhang
M: sonic.zhang@analog.com
-L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/serial/bfin_5xx.c
BLACKFIN WATCHDOG DRIVER
P: Mike Frysinger
M: vapier.adi@gmail.com
-L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org
S: Supported
F: drivers/watchdog/bfin_wdt.c
BLACKFIN I2C TWI DRIVER
P: Sonic Zhang
M: sonic.zhang@analog.com
-L: uclinux-dist-devel@blackfin.uclinux.org (subscribers-only)
+L: uclinux-dist-devel@blackfin.uclinux.org
W: http://blackfin.uclinux.org/
S: Supported
F: drivers/i2c/busses/i2c-bfin-twi.c
S: Maintained
F: drivers/net/wan/cosa*
+CPMAC ETHERNET DRIVER
+P: Florian Fainelli
+M: florian@openwrt.org
+L: netdev@vger.kernel.org
+S: Maintained
+F: drivers/net/cpmac.c
+
CPU FREQUENCY DRIVERS
P: Dave Jones
M: davej@redhat.com
EDAC-E752X
P: Mark Gross
-P: Doug Thompson
M: mark.gross@intel.com
+P: Doug Thompson
M: dougthompson@xmission.com
L: bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
W: bluesmoke.sourceforge.net
M: leoli@freescale.com
P: Zhang Wei
M: zw@zh-kernel.org
-L: linuxppc-embedded@ozlabs.org
+L: linuxppc-dev@ozlabs.org
L: linux-kernel@vger.kernel.org
S: Maintained
F: drivers/dma/fsldma.*
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 30
-EXTRAVERSION = -rc7
+EXTRAVERSION =
NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*
include $(srctree)/arch/$(SRCARCH)/Makefile
-ifneq (CONFIG_FRAME_WARN,0)
+ifneq ($(CONFIG_FRAME_WARN),0)
KBUILD_CFLAGS += $(call cc-option,-Wframe-larger-than=${CONFIG_FRAME_WARN})
endif
}
}
-static void
+static int
dp264_set_affinity(unsigned int irq, const struct cpumask *affinity)
{
spin_lock(&dp264_irq_lock);
cpu_set_irq_affinity(irq, *affinity);
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
+
+ return 0;
}
-static void
+static int
clipper_set_affinity(unsigned int irq, const struct cpumask *affinity)
{
spin_lock(&dp264_irq_lock);
cpu_set_irq_affinity(irq - 16, *affinity);
tsunami_update_irq_hw(cached_irq_mask);
spin_unlock(&dp264_irq_lock);
+
+ return 0;
}
static struct hw_interrupt_type dp264_irq_type = {
}
-static void
+static int
titan_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
{
spin_lock(&titan_irq_lock);
titan_cpu_set_irq_affinity(irq - 16, *affinity);
titan_update_irq_hw(titan_cached_irq_mask);
spin_unlock(&titan_irq_lock);
+
+ return 0;
}
static void
}
#ifdef CONFIG_SMP
-static void gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
+static int gic_set_cpu(unsigned int irq, const struct cpumask *mask_val)
{
void __iomem *reg = gic_dist_base(irq) + GIC_DIST_TARGET + (gic_irq(irq) & ~3);
unsigned int shift = (irq % 4) * 8;
val |= 1 << (cpu + shift);
writel(val, reg);
spin_unlock(&irq_controller_lock);
+
+ return 0;
}
#endif
.align 3; \
.long 9999b,9001f; \
.previous
+
+/*
+ * SMP data memory barrier
+ */
+ .macro smp_dmb
+#ifdef CONFIG_SMP
+#if __LINUX_ARM_ARCH__ >= 7
+ dmb
+#elif __LINUX_ARM_ARCH__ == 6
+ mcr p15, 0, r0, c7, c10, 5 @ dmb
+#endif
+#endif
+ .endm
: "cc");
}
+static inline void atomic_add(int i, atomic_t *v)
+{
+ unsigned long tmp;
+ int result;
+
+ __asm__ __volatile__("@ atomic_add\n"
+"1: ldrex %0, [%2]\n"
+" add %0, %0, %3\n"
+" strex %1, %0, [%2]\n"
+" teq %1, #0\n"
+" bne 1b"
+ : "=&r" (result), "=&r" (tmp)
+ : "r" (&v->counter), "Ir" (i)
+ : "cc");
+}
+
static inline int atomic_add_return(int i, atomic_t *v)
{
unsigned long tmp;
int result;
+ smp_mb();
+
__asm__ __volatile__("@ atomic_add_return\n"
"1: ldrex %0, [%2]\n"
" add %0, %0, %3\n"
: "r" (&v->counter), "Ir" (i)
: "cc");
+ smp_mb();
+
return result;
}
+static inline void atomic_sub(int i, atomic_t *v)
+{
+ unsigned long tmp;
+ int result;
+
+ __asm__ __volatile__("@ atomic_sub\n"
+"1: ldrex %0, [%2]\n"
+" sub %0, %0, %3\n"
+" strex %1, %0, [%2]\n"
+" teq %1, #0\n"
+" bne 1b"
+ : "=&r" (result), "=&r" (tmp)
+ : "r" (&v->counter), "Ir" (i)
+ : "cc");
+}
+
static inline int atomic_sub_return(int i, atomic_t *v)
{
unsigned long tmp;
int result;
+ smp_mb();
+
__asm__ __volatile__("@ atomic_sub_return\n"
"1: ldrex %0, [%2]\n"
" sub %0, %0, %3\n"
: "r" (&v->counter), "Ir" (i)
: "cc");
+ smp_mb();
+
return result;
}
{
unsigned long oldval, res;
+ smp_mb();
+
do {
__asm__ __volatile__("@ atomic_cmpxchg\n"
"ldrex %1, [%2]\n"
: "cc");
} while (res);
+ smp_mb();
+
return oldval;
}
return val;
}
+#define atomic_add(i, v) (void) atomic_add_return(i, v)
static inline int atomic_sub_return(int i, atomic_t *v)
{
return val;
}
+#define atomic_sub(i, v) (void) atomic_sub_return(i, v)
static inline int atomic_cmpxchg(atomic_t *v, int old, int new)
{
}
#define atomic_inc_not_zero(v) atomic_add_unless((v), 1, 0)
-#define atomic_add(i, v) (void) atomic_add_return(i, v)
-#define atomic_inc(v) (void) atomic_add_return(1, v)
-#define atomic_sub(i, v) (void) atomic_sub_return(i, v)
-#define atomic_dec(v) (void) atomic_sub_return(1, v)
+#define atomic_inc(v) atomic_add(1, v)
+#define atomic_dec(v) atomic_sub(1, v)
#define atomic_inc_and_test(v) (atomic_add_return(1, v) == 0)
#define atomic_dec_and_test(v) (atomic_sub_return(1, v) == 0)
#define atomic_add_negative(i,v) (atomic_add_return(i, v) < 0)
-/* Atomic operations are already serializing on ARM */
-#define smp_mb__before_atomic_dec() barrier()
-#define smp_mb__after_atomic_dec() barrier()
-#define smp_mb__before_atomic_inc() barrier()
-#define smp_mb__after_atomic_inc() barrier()
+#define smp_mb__before_atomic_dec() smp_mb()
+#define smp_mb__after_atomic_dec() smp_mb()
+#define smp_mb__before_atomic_inc() smp_mb()
+#define smp_mb__after_atomic_inc() smp_mb()
#include <asm-generic/atomic.h>
#endif
#define L1_CACHE_SHIFT 5
#define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
+/*
+ * Memory returned by kmalloc() may be used for DMA, so we must make
+ * sure that all such allocations are cache aligned. Otherwise,
+ * unrelated code may cause parts of the buffer to be read into the
+ * cache before the transfer is done, causing old data to be seen by
+ * the CPU.
+ */
+#define ARCH_KMALLOC_MINALIGN L1_CACHE_BYTES
+
+/*
+ * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
+ */
+#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
+#define ARCH_SLAB_MINALIGN 8
+#endif
+
#endif
#ifndef __ARM_FLAT_H__
#define __ARM_FLAT_H__
-/* An odd number of words will be pushed after this alignment, so
- deliberately misalign the value. */
-#define flat_stack_align(sp) sp = (void *)(((unsigned long)(sp) - 4) | 4)
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
(((current->personality & READ_IMPLIES_EXEC) ? VM_EXEC : 0) | \
VM_READ | VM_WRITE | VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
-/*
- * With EABI on ARMv5 and above we must have 64-bit aligned slab pointers.
- */
-#if defined(CONFIG_AEABI) && (__LINUX_ARM_ARCH__ >= 5)
-#define ARCH_SLAB_MINALIGN 8
-#endif
-
#include <asm-generic/page.h>
#endif
unsigned int tmp;
#endif
+ smp_mb();
+
switch (size) {
#if __LINUX_ARM_ARCH__ >= 6
case 1:
__bad_xchg(ptr, size), ret = 0;
break;
}
+ smp_mb();
return ret;
}
#include <asm-generic/cmpxchg-local.h>
+#if __LINUX_ARM_ARCH__ < 6
+
+#ifdef CONFIG_SMP
+#error "SMP is not supported on this platform"
+#endif
+
/*
* cmpxchg_local and cmpxchg64_local are atomic wrt current CPU. Always make
* them available.
#include <asm-generic/cmpxchg.h>
#endif
+#else /* __LINUX_ARM_ARCH__ >= 6 */
+
+extern void __bad_cmpxchg(volatile void *ptr, int size);
+
+/*
+ * cmpxchg only support 32-bits operands on ARMv6.
+ */
+
+static inline unsigned long __cmpxchg(volatile void *ptr, unsigned long old,
+ unsigned long new, int size)
+{
+ unsigned long oldval, res;
+
+ switch (size) {
+#ifdef CONFIG_CPU_32v6K
+ case 1:
+ do {
+ asm volatile("@ __cmpxchg1\n"
+ " ldrexb %1, [%2]\n"
+ " mov %0, #0\n"
+ " teq %1, %3\n"
+ " strexbeq %0, %4, [%2]\n"
+ : "=&r" (res), "=&r" (oldval)
+ : "r" (ptr), "Ir" (old), "r" (new)
+ : "memory", "cc");
+ } while (res);
+ break;
+ case 2:
+ do {
+ asm volatile("@ __cmpxchg1\n"
+ " ldrexh %1, [%2]\n"
+ " mov %0, #0\n"
+ " teq %1, %3\n"
+ " strexheq %0, %4, [%2]\n"
+ : "=&r" (res), "=&r" (oldval)
+ : "r" (ptr), "Ir" (old), "r" (new)
+ : "memory", "cc");
+ } while (res);
+ break;
+#endif /* CONFIG_CPU_32v6K */
+ case 4:
+ do {
+ asm volatile("@ __cmpxchg4\n"
+ " ldrex %1, [%2]\n"
+ " mov %0, #0\n"
+ " teq %1, %3\n"
+ " strexeq %0, %4, [%2]\n"
+ : "=&r" (res), "=&r" (oldval)
+ : "r" (ptr), "Ir" (old), "r" (new)
+ : "memory", "cc");
+ } while (res);
+ break;
+ default:
+ __bad_cmpxchg(ptr, size);
+ oldval = 0;
+ }
+
+ return oldval;
+}
+
+static inline unsigned long __cmpxchg_mb(volatile void *ptr, unsigned long old,
+ unsigned long new, int size)
+{
+ unsigned long ret;
+
+ smp_mb();
+ ret = __cmpxchg(ptr, old, new, size);
+ smp_mb();
+
+ return ret;
+}
+
+#define cmpxchg(ptr,o,n) \
+ ((__typeof__(*(ptr)))__cmpxchg_mb((ptr), \
+ (unsigned long)(o), \
+ (unsigned long)(n), \
+ sizeof(*(ptr))))
+
+static inline unsigned long __cmpxchg_local(volatile void *ptr,
+ unsigned long old,
+ unsigned long new, int size)
+{
+ unsigned long ret;
+
+ switch (size) {
+#ifndef CONFIG_CPU_32v6K
+ case 1:
+ case 2:
+ ret = __cmpxchg_local_generic(ptr, old, new, size);
+ break;
+#endif /* !CONFIG_CPU_32v6K */
+ default:
+ ret = __cmpxchg(ptr, old, new, size);
+ }
+
+ return ret;
+}
+
+#define cmpxchg_local(ptr,o,n) \
+ ((__typeof__(*(ptr)))__cmpxchg_local((ptr), \
+ (unsigned long)(o), \
+ (unsigned long)(n), \
+ sizeof(*(ptr))))
+
+#ifdef CONFIG_CPU_32v6K
+
+/*
+ * Note : ARMv7-M (currently unsupported by Linux) does not support
+ * ldrexd/strexd. If ARMv7-M is ever supported by the Linux kernel, it should
+ * not be allowed to use __cmpxchg64.
+ */
+static inline unsigned long long __cmpxchg64(volatile void *ptr,
+ unsigned long long old,
+ unsigned long long new)
+{
+ register unsigned long long oldval asm("r0");
+ register unsigned long long __old asm("r2") = old;
+ register unsigned long long __new asm("r4") = new;
+ unsigned long res;
+
+ do {
+ asm volatile(
+ " @ __cmpxchg8\n"
+ " ldrexd %1, %H1, [%2]\n"
+ " mov %0, #0\n"
+ " teq %1, %3\n"
+ " teqeq %H1, %H3\n"
+ " strexdeq %0, %4, %H4, [%2]\n"
+ : "=&r" (res), "=&r" (oldval)
+ : "r" (ptr), "Ir" (__old), "r" (__new)
+ : "memory", "cc");
+ } while (res);
+
+ return oldval;
+}
+
+static inline unsigned long long __cmpxchg64_mb(volatile void *ptr,
+ unsigned long long old,
+ unsigned long long new)
+{
+ unsigned long long ret;
+
+ smp_mb();
+ ret = __cmpxchg64(ptr, old, new);
+ smp_mb();
+
+ return ret;
+}
+
+#define cmpxchg64(ptr,o,n) \
+ ((__typeof__(*(ptr)))__cmpxchg64_mb((ptr), \
+ (unsigned long long)(o), \
+ (unsigned long long)(n)))
+
+#define cmpxchg64_local(ptr,o,n) \
+ ((__typeof__(*(ptr)))__cmpxchg64((ptr), \
+ (unsigned long long)(o), \
+ (unsigned long long)(n)))
+
+#else /* !CONFIG_CPU_32v6K */
+
+#define cmpxchg64_local(ptr, o, n) __cmpxchg64_local_generic((ptr), (o), (n))
+
+#endif /* CONFIG_CPU_32v6K */
+
+#endif /* __LINUX_ARM_ARCH__ >= 6 */
+
#endif /* __ASSEMBLY__ */
#define arch_align_stack(x) (x)
return 1;
if (cpu_architecture() < CPU_ARCH_ARMv6)
return 1;
+#if !defined(CONFIG_AEABI) || defined(CONFIG_OABI_COMPAT)
+ /*
+ * If we have support for OABI programs, we can never allow NX
+ * support - our signal syscall restart mechanism relies upon
+ * being able to execute code placed on the user stack.
+ */
+ return 1;
+#else
return 0;
+#endif
}
EXPORT_SYMBOL(arm_elf_read_implies_exec);
*/
__kuser_memory_barrier: @ 0xffff0fa0
-
-#if __LINUX_ARM_ARCH__ >= 6 && defined(CONFIG_SMP)
- mcr p15, 0, r0, c7, c10, 5 @ dmb
-#endif
+ smp_dmb
usr_ret lr
.align 5
mov r2, #1
add r1, r1, r0, lsr #3 @ Get byte offset
mov r3, r2, lsl r3 @ create mask
+ smp_dmb
1: ldrexb r2, [r1]
ands r0, r2, r3 @ save old value of bit
\instr r2, r2, r3 @ toggle bit
strexb ip, r2, [r1]
cmp ip, #0
bne 1b
+ smp_dmb
cmp r0, #0
movne r0, #1
2: mov pc, lr
/*
* Memory Map definitions
*/
-/* FIXME: Does it really swap SRAM like this? */
#ifdef CONFIG_GEMINI_MEM_SWAP
# define GEMINI_DRAM_BASE 0x00000000
-# define GEMINI_SRAM_BASE 0x20000000
+# define GEMINI_SRAM_BASE 0x70000000
#else
# define GEMINI_SRAM_BASE 0x00000000
# define GEMINI_DRAM_BASE 0x10000000
.id = 0,
.num_resources = 1,
.resource = kirkwood_ge00_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data)
.id = 1,
.num_resources = 1,
.resource = kirkwood_ge01_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init kirkwood_ge01_init(struct mv643xx_eth_platform_data *eth_data)
static struct resource kirkwood_i2c_resources[] = {
{
- .name = "i2c",
.start = I2C_PHYS_BASE,
.end = I2C_PHYS_BASE + 0x1f,
.flags = IORESOURCE_MEM,
}, {
- .name = "i2c",
.start = IRQ_KIRKWOOD_TWSI,
.end = IRQ_KIRKWOOD_TWSI,
.flags = IORESOURCE_IRQ,
MPP1_SPI_MOSI,
MPP2_SPI_SCK,
MPP3_SPI_MISO,
+ MPP4_SATA1_ACTn,
+ MPP5_SATA0_ACTn,
MPP8_TW_SDA,
MPP9_TW_SCK,
MPP10_UART0_TXD,
MPP14_UART1_RXD, /* PIC controller */
MPP15_GPIO, /* USB Copy button */
MPP16_GPIO, /* Reset button */
- MPP20_SATA1_ACTn,
- MPP21_SATA0_ACTn,
- MPP22_SATA1_PRESENTn,
- MPP23_SATA0_PRESENTn,
0
};
.id = 0,
.num_resources = 1,
.resource = loki_ge0_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init loki_ge0_init(struct mv643xx_eth_platform_data *eth_data)
.id = 1,
.num_resources = 1,
.resource = loki_ge1_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init loki_ge1_init(struct mv643xx_eth_platform_data *eth_data)
#include <mach/mfp.h>
+#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
+#define MFP_DRIVE_SLOW (0x1 << 13)
+#define MFP_DRIVE_MEDIUM (0x2 << 13)
+#define MFP_DRIVE_FAST (0x3 << 13)
+
/* GPIO */
#define GPIO0_GPIO MFP_CFG(GPIO0, AF5)
#define GPIO1_GPIO MFP_CFG(GPIO1, AF5)
#include <mach/mfp.h>
+#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
+#define MFP_DRIVE_SLOW (0x2 << 13)
+#define MFP_DRIVE_MEDIUM (0x4 << 13)
+#define MFP_DRIVE_FAST (0x8 << 13)
+
/* UART2 */
#define GPIO47_UART2_RXD MFP_CFG(GPIO47, AF6)
#define GPIO48_UART2_TXD MFP_CFG(GPIO48, AF6)
* possible, we make the following compromise:
*
* 1. SLEEP_OE_N will always be programmed to '1' (by MFP_LPM_FLOAT)
- * 2. DRIVE strength definitions redefined to include the reserved bit10
+ * 2. DRIVE strength definitions redefined to include the reserved bit
+ * - the reserved bit differs between pxa168 and pxa910, and the
+ * MFP_DRIVE_* macros are individually defined in mfp-pxa{168,910}.h
* 3. Override MFP_CFG() and MFP_CFG_DRV()
* 4. Drop the use of MFP_CFG_LPM() and MFP_CFG_X()
*/
-#define MFP_DRIVE_VERY_SLOW (0x0 << 13)
-#define MFP_DRIVE_SLOW (0x2 << 13)
-#define MFP_DRIVE_MEDIUM (0x4 << 13)
-#define MFP_DRIVE_FAST (0x8 << 13)
-
#undef MFP_CFG
#undef MFP_CFG_DRV
#undef MFP_CFG_LPM
.set_mode = timer_set_mode,
};
-static cycle_t clksrc_read(void)
+static cycle_t clksrc_read(struct clocksource *cs)
{
return timer_read();
}
.id = 0,
.num_resources = 1,
.resource = mv78xx0_ge00_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init mv78xx0_ge00_init(struct mv643xx_eth_platform_data *eth_data)
.id = 1,
.num_resources = 1,
.resource = mv78xx0_ge01_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init mv78xx0_ge01_init(struct mv643xx_eth_platform_data *eth_data)
.id = 2,
.num_resources = 1,
.resource = mv78xx0_ge10_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init mv78xx0_ge10_init(struct mv643xx_eth_platform_data *eth_data)
.id = 3,
.num_resources = 1,
.resource = mv78xx0_ge11_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init mv78xx0_ge11_init(struct mv643xx_eth_platform_data *eth_data)
static struct resource mv78xx0_i2c_0_resources[] = {
{
- .name = "i2c 0 base",
.start = I2C_0_PHYS_BASE,
.end = I2C_0_PHYS_BASE + 0x1f,
.flags = IORESOURCE_MEM,
}, {
- .name = "i2c 0 irq",
.start = IRQ_MV78XX0_I2C_0,
.end = IRQ_MV78XX0_I2C_0,
.flags = IORESOURCE_IRQ,
static struct resource mv78xx0_i2c_1_resources[] = {
{
- .name = "i2c 1 base",
.start = I2C_1_PHYS_BASE,
.end = I2C_1_PHYS_BASE + 0x1f,
.flags = IORESOURCE_MEM,
}, {
- .name = "i2c 1 irq",
.start = IRQ_MV78XX0_I2C_1,
.end = IRQ_MV78XX0_I2C_1,
.flags = IORESOURCE_IRQ,
.con_id = n, \
.clk = &c, \
},
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
/* It's unlikely that any driver wants one of them directly:
_REGISTER_CLOCK(NULL, "ckih", ckih_clk)
_REGISTER_CLOCK(NULL, "ckil", ckil_clk)
.clk = &c, \
},
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
_REGISTER_CLOCK("imx-uart.0", NULL, uart1_clk)
_REGISTER_CLOCK("imx-uart.1", NULL, uart2_clk)
_REGISTER_CLOCK("imx-uart.2", NULL, uart3_clk)
.clk = &c, \
},
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "asrc", asrc_clk)
_REGISTER_CLOCK(NULL, "ata", ata_clk)
_REGISTER_CLOCK(NULL, "audmux", audmux_clk)
.clk = &c, \
},
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
_REGISTER_CLOCK(NULL, "emi", emi_clk)
_REGISTER_CLOCK(NULL, "cspi", cspi1_clk)
_REGISTER_CLOCK(NULL, "cspi", cspi2_clk)
.id = 0,
.num_resources = 1,
.resource = orion5x_eth_resources,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
};
void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
static struct resource orion5x_i2c_resources[] = {
{
- .name = "i2c base",
.start = I2C_PHYS_BASE,
.end = I2C_PHYS_BASE + 0x1f,
.flags = IORESOURCE_MEM,
}, {
- .name = "i2c irq",
.start = IRQ_ORION5X_I2C,
.end = IRQ_ORION5X_I2C,
.flags = IORESOURCE_IRQ,
}
-static struct pxa2xx_udc_mach_info pxa_udc_info;
+static struct pxa2xx_udc_mach_info pxa_udc_info = {
+ .gpio_pullup = -1,
+ .gpio_vbus = -1,
+};
void __init pxa_set_udc_info(struct pxa2xx_udc_mach_info *info)
{
GPIO25_SSP1_TXD,
GPIO26_SSP1_RXD,
GPIO24_GPIO, /* pcap chip select */
- GPIO1_GPIO, /* pcap interrupt */
- GPIO4_GPIO, /* WDI_AP */
- GPIO55_GPIO, /* SYS_RESTART */
+ GPIO1_GPIO | WAKEUP_ON_EDGE_RISE, /* pcap interrupt */
+ GPIO4_GPIO | MFP_LPM_DRIVE_HIGH, /* WDI_AP */
+ GPIO55_GPIO | MFP_LPM_DRIVE_HIGH, /* SYS_RESTART */
/* MMC */
GPIO32_MMC_CLK,
#if defined(CONFIG_MACH_EZX_A780) || defined(CONFIG_MACH_EZX_E680)
static unsigned long gen1_pin_config[] __initdata = {
/* flip / lockswitch */
- GPIO12_GPIO,
+ GPIO12_GPIO | WAKEUP_ON_EDGE_BOTH,
/* bluetooth (bcm2035) */
- GPIO14_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
+ GPIO14_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */
GPIO48_GPIO, /* RESET */
GPIO28_GPIO, /* WAKEUP */
/* Neptune handshake */
- GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */
- GPIO57_GPIO, /* AP_RDY */
- GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */
- GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI2 */
- GPIO82_GPIO, /* RESET */
- GPIO99_GPIO, /* TC_MM_EN */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */
+ GPIO57_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */
+ GPIO13_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI */
+ GPIO3_GPIO | WAKEUP_ON_EDGE_BOTH, /* WDI2 */
+ GPIO82_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */
+ GPIO99_GPIO | MFP_LPM_DRIVE_HIGH, /* TC_MM_EN */
/* sound */
GPIO52_SSP3_SCLK,
defined(CONFIG_MACH_EZX_E2) || defined(CONFIG_MACH_EZX_E6)
static unsigned long gen2_pin_config[] __initdata = {
/* flip / lockswitch */
- GPIO15_GPIO,
+ GPIO15_GPIO | WAKEUP_ON_EDGE_BOTH,
/* EOC */
- GPIO10_GPIO,
+ GPIO10_GPIO | WAKEUP_ON_EDGE_RISE,
/* bluetooth (bcm2045) */
- GPIO13_GPIO | WAKEUP_ON_LEVEL_HIGH, /* HOSTWAKE */
+ GPIO13_GPIO | WAKEUP_ON_EDGE_RISE, /* HOSTWAKE */
GPIO37_GPIO, /* RESET */
GPIO57_GPIO, /* WAKEUP */
/* Neptune handshake */
- GPIO0_GPIO | WAKEUP_ON_LEVEL_HIGH, /* BP_RDY */
- GPIO96_GPIO, /* AP_RDY */
- GPIO3_GPIO | WAKEUP_ON_LEVEL_HIGH, /* WDI */
- GPIO116_GPIO, /* RESET */
+ GPIO0_GPIO | WAKEUP_ON_EDGE_FALL, /* BP_RDY */
+ GPIO96_GPIO | MFP_LPM_DRIVE_HIGH, /* AP_RDY */
+ GPIO3_GPIO | WAKEUP_ON_EDGE_FALL, /* WDI */
+ GPIO116_GPIO | MFP_LPM_DRIVE_HIGH, /* RESET */
GPIO41_GPIO, /* BP_FLASH */
/* sound */
*/
static struct i2c_board_info __initdata imote2_i2c_board_info[] = {
{ /* UCAM sensor board */
- .type = "max1238",
+ .type = "max1239",
.addr = 0x35,
}, { /* ITS400 Sensor board only */
.type = "max1363",
/**
* init_gpio_reset() - register GPIO as reset generator
* @gpio: gpio nr
- * @output: set gpio as out/low instead of input during normal work
+ * @output: set gpio as output instead of input during normal work
+ * @level: output level
*/
-extern int init_gpio_reset(int gpio, int output);
+extern int init_gpio_reset(int gpio, int output, int level);
#endif /* __ASM_ARCH_RESET_H */
#ifdef CONFIG_PM
static unsigned long saved_gafr[2][4];
static unsigned long saved_gpdr[4];
+static unsigned long saved_pgsr[4];
static int pxa2xx_mfp_suspend(struct sys_device *d, pm_message_t state)
{
saved_gafr[0][i] = GAFR_L(i);
saved_gafr[1][i] = GAFR_U(i);
saved_gpdr[i] = GPDR(i * 32);
+ saved_pgsr[i] = PGSR(i);
GPDR(i * 32) = gpdr_lpm[i];
}
GAFR_L(i) = saved_gafr[0][i];
GAFR_U(i) = saved_gafr[1][i];
GPDR(i * 32) = saved_gpdr[i];
+ PGSR(i) = saved_pgsr[i];
}
PSSR = PSSR_RDH | PSSR_PH;
return 0;
if (cpu_is_pxa27x())
pxa27x_mfp_init();
+ /* clear RDH bit to enable GPIO receivers after reset/sleep exit */
+ PSSR = PSSR_RDH;
+
/* initialize gafr_run[], pgsr_lpm[] from existing values */
for (i = 0; i <= gpio_to_bank(pxa_last_gpio); i++)
gpdr_lpm[i] = GPDR(i * 32);
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
+ GPIO89_AC97_SYSCLK,
+ GPIO95_AC97_nRESET,
/* IrDA */
GPIO108_GPIO, /* ir disable */
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
+ GPIO89_AC97_SYSCLK,
GPIO95_AC97_nRESET,
/* IrDA */
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
+ GPIO89_AC97_SYSCLK,
GPIO95_AC97_nRESET,
/* IrDA */
static int reset_gpio = -1;
-int init_gpio_reset(int gpio, int output)
+int init_gpio_reset(int gpio, int output, int level)
{
int rc;
}
if (output)
- rc = gpio_direction_output(gpio, 0);
+ rc = gpio_direction_output(gpio, level);
else
rc = gpio_direction_input(gpio);
if (rc) {
return gpio_direction_output(SPITZ_GPIO_USB_HOST, 1);
}
+static void spitz_ohci_exit(struct device *dev)
+{
+ gpio_free(SPITZ_GPIO_USB_HOST);
+}
+
static struct pxaohci_platform_data spitz_ohci_platform_data = {
.port_mode = PMM_NPS_MODE,
.init = spitz_ohci_init,
+ .exit = spitz_ohci_exit,
.flags = ENABLE_PORT_ALL | NO_OC_PROTECTION,
.power_budget = 150,
};
static void __init common_init(void)
{
- init_gpio_reset(SPITZ_GPIO_ON_RESET, 1);
+ init_gpio_reset(SPITZ_GPIO_ON_RESET, 1, 0);
pm_power_off = spitz_poweroff;
arm_pm_restart = spitz_restart;
gpio_set_wake(MFP_PIN_GPIO1, 1);
/* We can't pass to gpio-keys since it will drop the Reset altfunc */
- init_gpio_reset(TOSA_GPIO_ON_RESET, 0);
+ init_gpio_reset(TOSA_GPIO_ON_RESET, 0, 0);
pm_power_off = tosa_poweroff;
arm_pm_restart = tosa_restart;
stmia r12, {r0-r5, r7, r9, r11, lr}
bl v7_flush_dcache_all
ldmia r12, {r0-r5, r7, r9, r11, lr}
+
+ mrc p15, 0, r0, c0, c0, 0 @ read main ID register
+ and r10, r0, #0xff000000 @ ARM?
+ teq r10, #0x41000000
+ bne 2f
+ and r5, r0, #0x00f00000 @ variant
+ and r6, r0, #0x0000000f @ revision
+ orr r0, r6, r5, lsr #20-4 @ combine variant and revision
+
#ifdef CONFIG_ARM_ERRATA_430973
- mrc p15, 0, r10, c1, c0, 1 @ read aux control register
- orr r10, r10, #(1 << 6) @ set IBE to 1
- mcr p15, 0, r10, c1, c0, 1 @ write aux control register
+ teq r5, #0x00100000 @ only present in r1p*
+ mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
+ orreq r10, r10, #(1 << 6) @ set IBE to 1
+ mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_458693
- mrc p15, 0, r10, c1, c0, 1 @ read aux control register
- orr r10, r10, #(1 << 5) @ set L1NEON to 1
- orr r10, r10, #(1 << 9) @ set PLDNOP to 1
- mcr p15, 0, r10, c1, c0, 1 @ write aux control register
+ teq r0, #0x20 @ only present in r2p0
+ mrceq p15, 0, r10, c1, c0, 1 @ read aux control register
+ orreq r10, r10, #(1 << 5) @ set L1NEON to 1
+ orreq r10, r10, #(1 << 9) @ set PLDNOP to 1
+ mcreq p15, 0, r10, c1, c0, 1 @ write aux control register
#endif
#ifdef CONFIG_ARM_ERRATA_460075
- mrc p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
- orr r10, r10, #(1 << 22) @ set the Write Allocate disable bit
- mcr p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
+ teq r0, #0x20 @ only present in r2p0
+ mrceq p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
+ tsteq r10, #1 << 22
+ orreq r10, r10, #(1 << 22) @ set the Write Allocate disable bit
+ mcreq p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
#endif
- mov r10, #0
+
+2: mov r10, #0
#ifdef HARVARD_CACHE
mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate
#endif
#
# http://www.arm.linux.org.uk/developer/machines/?action=new
#
-# Last update: Mon Mar 23 20:09:01 2009
+# Last update: Fri May 29 10:14:20 2009
#
# machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number
#
apf9328 MACH_APF9328 APF9328 906
omap_wipoq MACH_OMAP_WIPOQ OMAP_WIPOQ 907
omap_twip MACH_OMAP_TWIP OMAP_TWIP 908
-palmt650 MACH_PALMT650 PALMT650 909
+treo650 MACH_TREO650 TREO650 909
acumen MACH_ACUMEN ACUMEN 910
xp100 MACH_XP100 XP100 911
fs2410 MACH_FS2410 FS2410 912
vpac270 MACH_VPAC270 VPAC270 1227
rd129 MACH_RD129 RD129 1228
htcwizard MACH_HTCWIZARD HTCWIZARD 1229
-xscale_treo680 MACH_XSCALE_TREO680 XSCALE_TREO680 1230
+treo680 MACH_TREO680 TREO680 1230
tecon_tmezon MACH_TECON_TMEZON TECON_TMEZON 1231
zylonite MACH_ZYLONITE ZYLONITE 1233
gene1270 MACH_GENE1270 GENE1270 1234
cnty_titan MACH_CNTY_TITAN CNTY_TITAN 1418
app3xx MACH_APP3XX APP3XX 1419
sideoatsgrama MACH_SIDEOATSGRAMA SIDEOATSGRAMA 1420
-palmtreo700p MACH_PALMTREO700P PALMTREO700P 1421
-palmtreo700w MACH_PALMTREO700W PALMTREO700W 1422
-palmtreo750 MACH_PALMTREO750 PALMTREO750 1423
-palmtreo755p MACH_PALMTREO755P PALMTREO755P 1424
+treo700p MACH_TREO700P TREO700P 1421
+treo700w MACH_TREO700W TREO700W 1422
+treo750 MACH_TREO750 TREO750 1423
+treo755p MACH_TREO755P TREO755P 1424
ezreganut9200 MACH_EZREGANUT9200 EZREGANUT9200 1425
sarge MACH_SARGE SARGE 1426
a696 MACH_A696 A696 1427
csb637xo MACH_CSB637XO CSB637XO 1730
evisiong MACH_EVISIONG EVISIONG 1731
stmp37xx MACH_STMP37XX STMP37XX 1732
-stmp378x MACH_STMP38XX STMP38XX 1733
+stmp378x MACH_STMP378X STMP378X 1733
tnt MACH_TNT TNT 1734
tbxt MACH_TBXT TBXT 1735
playmate MACH_PLAYMATE PLAYMATE 1736
tavorevb MACH_TAVOREVB TAVOREVB 1827
saar MACH_SAAR SAAR 1828
deister_eyecam MACH_DEISTER_EYECAM DEISTER_EYECAM 1829
-at91sam9m10ek MACH_AT91SAM9M10EK AT91SAM9M10EK 1830
+at91sam9m10g45ek MACH_AT91SAM9M10G45EK AT91SAM9M10G45EK 1830
linkstation_produo MACH_LINKSTATION_PRODUO LINKSTATION_PRODUO 1831
hit_b0 MACH_HIT_B0 HIT_B0 1832
adx_rmu MACH_ADX_RMU ADX_RMU 1833
at91cap9stk MACH_AT91CAP9STK AT91CAP9STK 2142
spc300 MACH_SPC300 SPC300 2143
eko MACH_EKO EKO 2144
+ccw9m2443 MACH_CCW9M2443 CCW9M2443 2145
+ccw9m2443js MACH_CCW9M2443JS CCW9M2443JS 2146
+m2m_router_device MACH_M2M_ROUTER_DEVICE M2M_ROUTER_DEVICE 2147
+str9104nas MACH_STAR9104NAS STAR9104NAS 2148
+pca100 MACH_PCA100 PCA100 2149
+z3_dm365_mod_01 MACH_Z3_DM365_MOD_01 Z3_DM365_MOD_01 2150
+hipox MACH_HIPOX HIPOX 2151
+omap3_piteds MACH_OMAP3_PITEDS OMAP3_PITEDS 2152
+bm150r MACH_BM150R BM150R 2153
+tbone MACH_TBONE TBONE 2154
+merlin MACH_MERLIN MERLIN 2155
+falcon MACH_FALCON FALCON 2156
+davinci_da850_evm MACH_DAVINCI_DA850_EVM DAVINCI_DA850_EVM 2157
+s5p6440 MACH_S5P6440 S5P6440 2158
+at91sam9g10ek MACH_AT91SAM9G10EK AT91SAM9G10EK 2159
+omap_4430sdp MACH_OMAP_4430SDP OMAP_4430SDP 2160
+lpc313x MACH_LPC313X LPC313X 2161
+magx_zn5 MACH_MAGX_ZN5 MAGX_ZN5 2162
+magx_em30 MACH_MAGX_EM30 MAGX_EM30 2163
+magx_ve66 MACH_MAGX_VE66 MAGX_VE66 2164
+meesc MACH_MEESC MEESC 2165
+otc570 MACH_OTC570 OTC570 2166
+bcu2412 MACH_BCU2412 BCU2412 2167
+beacon MACH_BEACON BEACON 2168
+actia_tgw MACH_ACTIA_TGW ACTIA_TGW 2169
+e4430 MACH_E4430 E4430 2170
+ql300 MACH_QL300 QL300 2171
+btmavb101 MACH_BTMAVB101 BTMAVB101 2172
+btmawb101 MACH_BTMAWB101 BTMAWB101 2173
+sq201 MACH_SQ201 SQ201 2174
+quatro45xx MACH_QUATRO45XX QUATRO45XX 2175
+openpad MACH_OPENPAD OPENPAD 2176
+tx25 MACH_TX25 TX25 2177
+omap3_torpedo MACH_OMAP3_TORPEDO OMAP3_TORPEDO 2178
+htcraphael_k MACH_HTCRAPHAEL_K HTCRAPHAEL_K 2179
+lal43 MACH_LAL43 LAL43 2181
+htcraphael_cdma500 MACH_HTCRAPHAEL_CDMA500 HTCRAPHAEL_CDMA500 2182
+anw6410 MACH_ANW6410 ANW6410 2183
+htcprophet MACH_HTCPROPHET HTCPROPHET 2185
+cfa_10022 MACH_CFA_10022 CFA_10022 2186
+imx27_visstrim_m10 MACH_IMX27_VISSTRIM_M10 IMX27_VISSTRIM_M10 2187
+px2imx27 MACH_PX2IMX27 PX2IMX27 2188
+stm3210e_eval MACH_STM3210E_EVAL STM3210E_EVAL 2189
+dvs10 MACH_DVS10 DVS10 2190
+portuxg20 MACH_PORTUXG20 PORTUXG20 2191
+arm_spv MACH_ARM_SPV ARM_SPV 2192
+smdkc110 MACH_SMDKC110 SMDKC110 2193
+cabespresso MACH_CABESPRESSO CABESPRESSO 2194
+hmc800 MACH_HMC800 HMC800 2195
+sholes MACH_SHOLES SHOLES 2196
+btmxc31 MACH_BTMXC31 BTMXC31 2197
+dt501 MACH_DT501 DT501 2198
+ktx MACH_KTX KTX 2199
+omap3517evm MACH_OMAP3517EVM OMAP3517EVM 2200
+netspace_v2 MACH_NETSPACE_V2 NETSPACE_V2 2201
+netspace_max_v2 MACH_NETSPACE_MAX_V2 NETSPACE_MAX_V2 2202
+d2net_v2 MACH_D2NET_V2 D2NET_V2 2203
+net2big_v2 MACH_NET2BIG_V2 NET2BIG_V2 2204
+net4big_v2 MACH_NET4BIG_V2 NET4BIG_V2 2205
+net5big_v2 MACH_NET5BIG_V2 NET5BIG_V2 2206
+endb2443 MACH_ENDB2443 ENDB2443 2207
+inetspace_v2 MACH_INETSPACE_V2 INETSPACE_V2 2208
+tros MACH_TROS TROS 2209
+pelco_homer MACH_PELCO_HOMER PELCO_HOMER 2210
+ofsp8 MACH_OFSP8 OFSP8 2211
+at91sam9g45ekes MACH_AT91SAM9G45EKES AT91SAM9G45EKES 2212
+guf_cupid MACH_GUF_CUPID GUF_CUPID 2213
+eab1r MACH_EAB1R EAB1R 2214
+desirec MACH_DESIREC DESIREC 2215
+cordoba MACH_CORDOBA CORDOBA 2216
+irvine MACH_IRVINE IRVINE 2217
+sff772 MACH_SFF772 SFF772 2218
+pelco_milano MACH_PELCO_MILANO PELCO_MILANO 2219
+pc7302 MACH_PC7302 PC7302 2220
+bip6000 MACH_BIP6000 BIP6000 2221
+silvermoon MACH_SILVERMOON SILVERMOON 2222
+vc0830 MACH_VC0830 VC0830 2223
+dt430 MACH_DT430 DT430 2224
+ji42pf MACH_JI42PF JI42PF 2225
+gnet_ksm MACH_GNET_KSM GNET_KSM 2226
+gnet_sgm MACH_GNET_SGM GNET_SGM 2227
+gnet_sgr MACH_GNET_SGR GNET_SGR 2228
+omap3_icetekevm MACH_OMAP3_ICETEKEVM OMAP3_ICETEKEVM 2229
+pnp MACH_PNP PNP 2230
+ctera_2bay_k MACH_CTERA_2BAY_K CTERA_2BAY_K 2231
+ctera_2bay_u MACH_CTERA_2BAY_U CTERA_2BAY_U 2232
+sas_c MACH_SAS_C SAS_C 2233
+vma2315 MACH_VMA2315 VMA2315 2234
+vcs MACH_VCS VCS 2235
+spear600 MACH_SPEAR600 SPEAR600 2236
+spear300 MACH_SPEAR300 SPEAR300 2237
+spear1300 MACH_SPEAR1300 SPEAR1300 2238
+lilly1131 MACH_LILLY1131 LILLY1131 2239
+arvoo_ax301 MACH_ARVOO_AX301 ARVOO_AX301 2240
+mapphone MACH_MAPPHONE MAPPHONE 2241
+legend MACH_LEGEND LEGEND 2242
+salsa MACH_SALSA SALSA 2243
+lounge MACH_LOUNGE LOUNGE 2244
+vision MACH_VISION VISION 2245
+vmb20 MACH_VMB20 VMB20 2246
+hy2410 MACH_HY2410 HY2410 2247
+hy9315 MACH_HY9315 HY9315 2248
+bullwinkle MACH_BULLWINKLE BULLWINKLE 2249
+arm_ultimator2 MACH_ARM_ULTIMATOR2 ARM_ULTIMATOR2 2250
+vs_v210 MACH_VS_V210 VS_V210 2252
+vs_v212 MACH_VS_V212 VS_V212 2253
+hmt MACH_HMT HMT 2254
+suen3 MACH_SUEN3 SUEN3 2255
+vesper MACH_VESPER VESPER 2256
+str9 MACH_STR9 STR9 2257
+omap3_wl_ff MACH_OMAP3_WL_FF OMAP3_WL_FF 2258
+simcom MACH_SIMCOM SIMCOM 2259
+mcwebio MACH_MCWEBIO MCWEBIO 2260
#include <asm/unaligned.h>
-#define flat_stack_align(sp) /* nothing needed */
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
#define __NR_dup3 363
#define __NR_pipe2 364
#define __NR_inotify_init1 365
+#define __NR_preadv 366
+#define __NR_pwritev 367
-#define __NR_syscall 366
+#define __NR_syscall 368
#define NR_syscalls __NR_syscall
/* Old optional stuff no one actually uses */
--- /dev/null
+vmlinux.lds
#define strncmp __inline_strncmp
#include <asm/string.h>
-#undef strncmp
-
#include <linux/module.h>
+#undef strncmp
int strncmp(const char *cs, const char *ct, size_t count)
{
.long _sys_dup3
.long _sys_pipe2
.long _sys_inotify_init1 /* 365 */
+ .long _sys_preadv
+ .long _sys_pwritev
.rept NR_syscalls-(.-_sys_call_table)/4
.long _sys_ni_syscall
{
}
-void set_affinity_crisv32_irq(unsigned int irq, const struct cpumask *dest)
+int set_affinity_crisv32_irq(unsigned int irq, const struct cpumask *dest)
{
unsigned long flags;
spin_lock_irqsave(&irq_lock, flags);
irq_allocations[irq - FIRST_IRQ].mask = *dest;
spin_unlock_irqrestore(&irq_lock, flags);
+
+ return 0;
}
static struct irq_chip crisv32_irq_type = {
#ifndef __H8300_FLAT_H__
#define __H8300_FLAT_H__
-#define flat_stack_align(sp) /* nothing needed */
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) 1
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
{
}
-static void
+static int
hpsim_set_affinity_noop(unsigned int a, const struct cpumask *b)
{
+ return 0;
}
static struct hw_interrupt_type irq_type_hp_sim = {
* success: return IRQ number (>=0)
* failure: return < 0
*/
-int acpi_register_gsi(u32 gsi, int triggering, int polarity)
+int acpi_register_gsi(struct device *dev, u32 gsi, int triggering, int polarity)
{
if (acpi_irq_model == ACPI_IRQ_MODEL_PLATFORM)
return gsi;
fadt = (struct acpi_table_fadt *)fadt_header;
- acpi_register_gsi(fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE, ACPI_ACTIVE_LOW);
+ acpi_register_gsi(NULL, fadt->sci_interrupt, ACPI_LEVEL_SENSITIVE,
+ ACPI_ACTIVE_LOW);
return 0;
}
}
-static void
+static int
iosapic_set_affinity(unsigned int irq, const struct cpumask *mask)
{
#ifdef CONFIG_SMP
cpu = cpumask_first_and(cpu_online_mask, mask);
if (cpu >= nr_cpu_ids)
- return;
+ return -1;
if (irq_prepare_move(irq, cpu))
- return;
+ return -1;
dest = cpu_physical_id(cpu);
if (!iosapic_intr_info[irq].count)
- return; /* not an IOSAPIC interrupt */
+ return -1; /* not an IOSAPIC interrupt */
set_irq_affinity_info(irq, dest, redir);
iosapic_write(iosapic, IOSAPIC_RTE_HIGH(rte_index), high32);
iosapic_write(iosapic, IOSAPIC_RTE_LOW(rte_index), low32);
}
+
#endif
+ return 0;
}
/*
static struct irq_chip ia64_msi_chip;
#ifdef CONFIG_SMP
-static void ia64_set_msi_irq_affinity(unsigned int irq,
+static int ia64_set_msi_irq_affinity(unsigned int irq,
const cpumask_t *cpu_mask)
{
struct msi_msg msg;
int cpu = first_cpu(*cpu_mask);
if (!cpu_online(cpu))
- return;
+ return -1;
if (irq_prepare_move(irq, cpu))
- return;
+ return -1;
read_msi_msg(irq, &msg);
write_msi_msg(irq, &msg);
cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu));
+
+ return 0;
}
#endif /* CONFIG_SMP */
#ifdef CONFIG_DMAR
#ifdef CONFIG_SMP
-static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
+static int dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
{
struct irq_cfg *cfg = irq_cfg + irq;
struct msi_msg msg;
int cpu = cpumask_first(mask);
if (!cpu_online(cpu))
- return;
+ return -1;
if (irq_prepare_move(irq, cpu))
- return;
+ return -1;
dmar_msi_read(irq, &msg);
dmar_msi_write(irq, &msg);
cpumask_copy(irq_desc[irq].affinity, mask);
+
+ return 0;
}
#endif /* CONFIG_SMP */
return new_irq_info;
}
-static void sn_set_affinity_irq(unsigned int irq, const struct cpumask *mask)
+static int sn_set_affinity_irq(unsigned int irq, const struct cpumask *mask)
{
struct sn_irq_info *sn_irq_info, *sn_irq_info_safe;
nasid_t nasid;
list_for_each_entry_safe(sn_irq_info, sn_irq_info_safe,
sn_irq_lh[irq], list)
(void)sn_retarget_vector(sn_irq_info, nasid, slice);
+
+ return 0;
}
#ifdef CONFIG_SMP
}
#ifdef CONFIG_SMP
-static void sn_set_msi_irq_affinity(unsigned int irq,
+static int sn_set_msi_irq_affinity(unsigned int irq,
const struct cpumask *cpu_mask)
{
struct msi_msg msg;
cpu = cpumask_first(cpu_mask);
sn_irq_info = sn_msi_info[irq].sn_irq_info;
if (sn_irq_info == NULL || sn_irq_info->irq_int_bit >= 0)
- return;
+ return -1;
/*
* Release XIO resources for the old MSI PCI address
new_irq_info = sn_retarget_vector(sn_irq_info, nasid, slice);
sn_msi_info[irq].sn_irq_info = new_irq_info;
if (new_irq_info == NULL)
- return;
+ return -1;
/*
* Map the xio address into bus space
write_msi_msg(irq, &msg);
cpumask_copy(irq_desc[irq].affinity, cpu_mask);
+
+ return 0;
}
#endif /* CONFIG_SMP */
#ifndef __ASM_M32R_FLAT_H
#define __ASM_M32R_FLAT_H
-#define flat_stack_align(sp) (*sp += (*sp & 3 ? (4 - (*sp & 3)): 0))
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
#define flat_set_persistent(relval, p) 0
#ifndef __M68KNOMMU_FLAT_H__
#define __M68KNOMMU_FLAT_H__
-#define flat_stack_align(sp) /* nothing needed */
#define flat_argvp_envp_on_stack() 1
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
select IRQ_CPU
select IRQ_GT641XX
select PCI_GT64XXX_PCI0
+ select PCI
select SYS_HAS_CPU_NEVADA
select SYS_HAS_EARLY_PRINTK
select SYS_SUPPORTS_32BIT_KERNEL
board, which is based on GT64120 bridge chip.
config CAVIUM_OCTEON_SIMULATOR
- bool "Support for the Cavium Networks Octeon Simulator"
+ bool "Cavium Networks Octeon Simulator"
select CEVT_R4K
select 64BIT_PHYS_ADDR
select DMA_COHERENT
hardware.
config CAVIUM_OCTEON_REFERENCE_BOARD
- bool "Support for the Cavium Networks Octeon reference board"
+ bool "Cavium Networks Octeon reference board"
select CEVT_R4K
select 64BIT_PHYS_ADDR
select DMA_COHERENT
}
#ifdef CONFIG_SMP
-static void octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask *dest)
+static int octeon_irq_ciu0_set_affinity(unsigned int irq, const struct cpumask *dest)
{
int cpu;
int bit = irq - OCTEON_IRQ_WORKQ0; /* Bit 0-63 of EN0 */
*/
cvmx_read_csr(CVMX_CIU_INTX_EN0(cvmx_get_core_num() * 2));
write_unlock(&octeon_irq_ciu0_rwlock);
+
+ return 0;
}
#endif
}
#ifdef CONFIG_SMP
-static void octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask *dest)
+static int octeon_irq_ciu1_set_affinity(unsigned int irq, const struct cpumask *dest)
{
int cpu;
int bit = irq - OCTEON_IRQ_WDOG0; /* Bit 0-63 of EN1 */
*/
cvmx_read_csr(CVMX_CIU_INTX_EN1(cvmx_get_core_num() * 2 + 1));
write_unlock(&octeon_irq_ciu1_rwlock);
+
+ return 0;
}
#endif
#define MIPS_CACHE_PINDEX 0x00000020 /* Physically indexed cache */
struct cpuinfo_mips {
- unsigned long udelay_val;
- unsigned long asid_cache;
+ unsigned int udelay_val;
+ unsigned int asid_cache;
/*
* Capability and feature descriptor structure for MIPS CPU
#ifndef _ASM_DELAY_H
#define _ASM_DELAY_H
-#include <linux/param.h>
-#include <linux/smp.h>
+extern void __delay(unsigned int loops);
+extern void __ndelay(unsigned int ns);
+extern void __udelay(unsigned int us);
-#include <asm/compiler.h>
-#include <asm/war.h>
-
-static inline void __delay(unsigned long loops)
-{
- if (sizeof(long) == 4)
- __asm__ __volatile__ (
- " .set noreorder \n"
- " .align 3 \n"
- "1: bnez %0, 1b \n"
- " subu %0, 1 \n"
- " .set reorder \n"
- : "=r" (loops)
- : "0" (loops));
- else if (sizeof(long) == 8 && !DADDI_WAR)
- __asm__ __volatile__ (
- " .set noreorder \n"
- " .align 3 \n"
- "1: bnez %0, 1b \n"
- " dsubu %0, 1 \n"
- " .set reorder \n"
- : "=r" (loops)
- : "0" (loops));
- else if (sizeof(long) == 8 && DADDI_WAR)
- __asm__ __volatile__ (
- " .set noreorder \n"
- " .align 3 \n"
- "1: bnez %0, 1b \n"
- " dsubu %0, %2 \n"
- " .set reorder \n"
- : "=r" (loops)
- : "0" (loops), "r" (1));
-}
-
-
-/*
- * Division by multiplication: you don't have to worry about
- * loss of precision.
- *
- * Use only for very small delays ( < 1 msec). Should probably use a
- * lookup table, really, as the multiplications take much too long with
- * short delays. This is a "reasonable" implementation, though (and the
- * first constant multiplications gets optimized away if the delay is
- * a constant)
- */
-
-static inline void __udelay(unsigned long usecs, unsigned long lpj)
-{
- unsigned long hi, lo;
-
- /*
- * The rates of 128 is rounded wrongly by the catchall case
- * for 64-bit. Excessive precission? Probably ...
- */
-#if defined(CONFIG_64BIT) && (HZ == 128)
- usecs *= 0x0008637bd05af6c7UL; /* 2**64 / (1000000 / HZ) */
-#elif defined(CONFIG_64BIT)
- usecs *= (0x8000000000000000UL / (500000 / HZ));
-#else /* 32-bit junk follows here */
- usecs *= (unsigned long) (((0x8000000000000000ULL / (500000 / HZ)) +
- 0x80000000ULL) >> 32);
-#endif
-
- if (sizeof(long) == 4)
- __asm__("multu\t%2, %3"
- : "=h" (usecs), "=l" (lo)
- : "r" (usecs), "r" (lpj)
- : GCC_REG_ACCUM);
- else if (sizeof(long) == 8 && !R4000_WAR)
- __asm__("dmultu\t%2, %3"
- : "=h" (usecs), "=l" (lo)
- : "r" (usecs), "r" (lpj)
- : GCC_REG_ACCUM);
- else if (sizeof(long) == 8 && R4000_WAR)
- __asm__("dmultu\t%3, %4\n\tmfhi\t%0"
- : "=r" (usecs), "=h" (hi), "=l" (lo)
- : "r" (usecs), "r" (lpj)
- : GCC_REG_ACCUM);
-
- __delay(usecs);
-}
-
-#define __udelay_val cpu_data[raw_smp_processor_id()].udelay_val
-
-#define udelay(usecs) __udelay((usecs), __udelay_val)
+#define ndelay(ns) __udelay(ns)
+#define udelay(us) __udelay(us)
/* make sure "usecs *= ..." in udelay do not overflow. */
#if HZ >= 1000
((nr) << _IOC_NRSHIFT) | \
((size) << _IOC_SIZESHIFT))
+#ifdef __KERNEL__
/* provoke compile error for invalid uses of size argument */
extern unsigned int __invalid_size_argument_for_IOC;
#define _IOC_TYPECHECK(t) \
((sizeof(t) == sizeof(t[1]) && \
sizeof(t) < (1 << _IOC_SIZEBITS)) ? \
sizeof(t) : __invalid_size_argument_for_IOC)
+#else
+#define _IOC_TYPECHECK(t) (sizeof(t))
+#endif
/* used to create numbers */
#define _IO(type, nr) _IOC(_IOC_NONE, (type), (nr), 0)
#ifdef CONFIG_MIPS_MT_SMTC_IRQAFF
#include <linux/cpumask.h>
-extern void plat_set_irq_affinity(unsigned int irq,
+extern int plat_set_irq_affinity(unsigned int irq,
const struct cpumask *affinity);
extern void smtc_forward_irq(unsigned int irq);
static DEFINE_SPINLOCK(gic_lock);
-static void gic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
+static int gic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
{
cpumask_t tmp = CPU_MASK_NONE;
unsigned long flags;
cpumask_and(&tmp, cpumask, cpu_online_mask);
if (cpus_empty(tmp))
- return;
+ return -1;
/* Assumption : cpumask refers to a single CPU */
spin_lock_irqsave(&gic_lock, flags);
cpumask_copy(irq_desc[irq].affinity, cpumask);
spin_unlock_irqrestore(&gic_lock, flags);
+ return 0;
}
#endif
seq_printf(m, fmt, __cpu_name[n],
(version >> 4) & 0x0f, version & 0x0f,
(fp_vers >> 4) & 0x0f, fp_vers & 0x0f);
- seq_printf(m, "BogoMIPS\t\t: %lu.%02lu\n",
+ seq_printf(m, "BogoMIPS\t\t: %u.%02u\n",
cpu_data[n].udelay_val / (500000/HZ),
(cpu_data[n].udelay_val / (5000/HZ)) % 100);
seq_printf(m, "wait instruction\t: %s\n", cpu_wait ? "yes" : "no");
# Makefile for MIPS-specific library files..
#
-lib-y += csum_partial.o memcpy.o memcpy-inatomic.o memset.o strlen_user.o \
- strncpy_user.o strnlen_user.o uncached.o
+lib-y += csum_partial.o delay.o memcpy.o memcpy-inatomic.o memset.o \
+ strlen_user.o strncpy_user.o strnlen_user.o uncached.o
obj-y += iomap.o
obj-$(CONFIG_PCI) += iomap-pci.o
--- /dev/null
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 1994 by Waldorf Electronics
+ * Copyright (C) 1995 - 2000, 01, 03 by Ralf Baechle
+ * Copyright (C) 1999, 2000 Silicon Graphics, Inc.
+ * Copyright (C) 2007 Maciej W. Rozycki
+ */
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/smp.h>
+
+#include <asm/compiler.h>
+#include <asm/war.h>
+
+inline void __delay(unsigned int loops)
+{
+ __asm__ __volatile__ (
+ " .set noreorder \n"
+ " .align 3 \n"
+ "1: bnez %0, 1b \n"
+ " subu %0, 1 \n"
+ " .set reorder \n"
+ : "=r" (loops)
+ : "0" (loops));
+}
+EXPORT_SYMBOL(__delay);
+
+/*
+ * Division by multiplication: you don't have to worry about
+ * loss of precision.
+ *
+ * Use only for very small delays ( < 1 msec). Should probably use a
+ * lookup table, really, as the multiplications take much too long with
+ * short delays. This is a "reasonable" implementation, though (and the
+ * first constant multiplications gets optimized away if the delay is
+ * a constant)
+ */
+
+void __udelay(unsigned long us)
+{
+ unsigned int lpj = current_cpu_data.udelay_val;
+
+ __delay((us * 0x000010c7 * HZ * lpj) >> 32);
+}
+EXPORT_SYMBOL(__udelay);
+
+void __ndelay(unsigned long ns)
+{
+ unsigned int lpj = current_cpu_data.udelay_val;
+
+ __delay((us * 0x00000005 * HZ * lpj) >> 32);
+}
+EXPORT_SYMBOL(__ndelay);
*/
-void plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
+int plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity)
{
cpumask_t tmask;
int cpu = 0;
/* Do any generic SMTC IRQ affinity setup */
smtc_set_irq_affinity(irq, tmask);
+
+ return 0;
}
#endif /* CONFIG_MIPS_MT_SMTC_IRQAFF */
static void disable_bcm1480_irq(unsigned int irq);
static void ack_bcm1480_irq(unsigned int irq);
#ifdef CONFIG_SMP
-static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask);
+static int bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask);
#endif
#ifdef CONFIG_PCI
}
#ifdef CONFIG_SMP
-static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
+static int bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
{
int i = 0, old_cpu, cpu, int_on, k;
u64 cur_ints;
if (cpumask_weight(mask) != 1) {
printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
- return;
+ return -1;
}
i = cpumask_first(mask);
}
}
spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
+
+ return 0;
}
#endif
*/
cfe_cons_handle = cfe_getstdhandle(CFE_STDHANDLE_CONSOLE);
if (cfe_getenv("LINUX_CMDLINE", arcs_cmdline, CL_SIZE) < 0) {
- if (argc < 0) {
- /*
- * It's OK for direct boot to not provide a
- * command line
- */
- strcpy(arcs_cmdline, "root=/dev/ram0 ");
- } else {
+ if (argc >= 0) {
/* The loader should have set the command line */
/* too early for panic to do any good */
printk("LINUX_CMDLINE not defined in cfe.");
static void disable_sb1250_irq(unsigned int irq);
static void ack_sb1250_irq(unsigned int irq);
#ifdef CONFIG_SMP
-static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask);
+static int sb1250_set_affinity(unsigned int irq, const struct cpumask *mask);
#endif
#ifdef CONFIG_SIBYTE_HAS_LDT
}
#ifdef CONFIG_SMP
-static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
+static int sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
{
int i = 0, old_cpu, cpu, int_on;
u64 cur_ints;
if (cpumask_weight(mask) > 1) {
printk("attempted to set irq affinity for irq %d to multiple CPUs\n", irq);
- return;
+ return -1;
}
/* Convert logical CPU to physical CPU */
R_IMR_INTERRUPT_MASK));
}
spin_unlock_irqrestore(&sb1250_imr_lock, flags);
+
+ return 0;
}
#endif
return cpu_dest;
}
-static void cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest)
+static int cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest)
{
int cpu_dest;
cpu_dest = cpu_check_affinity(irq, dest);
if (cpu_dest < 0)
- return;
+ return -1;
cpumask_copy(&irq_desc[irq].affinity, dest);
+
+ return 0;
}
#endif
default "0x80000000" if PPC_PREP || PPC_8xx
default "0xc0000000"
+config CONSISTENT_SIZE_BOOL
+ bool "Set custom consistent memory pool size"
+ depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
+ help
+ This option allows you to set the size of the
+ consistent memory pool. This pool of virtual memory
+ is used to make consistent memory allocations.
+
+config CONSISTENT_SIZE
+ hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
+ default "0x00200000" if NOT_COHERENT_CACHE
+
config PIN_TLB
bool "Pinned Kernel TLBs (860 ONLY)"
depends on ADVANCED_OPTIONS && 8xx
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28-rc3
-# Tue Nov 11 19:36:51 2008
+# Linux kernel version: 2.6.30-rc7
+# Mon May 25 14:53:25 2009
#
# CONFIG_PPC64 is not set
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
CONFIG_HIBERNATE_32=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
-CONFIG_LSF=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
CONFIG_FREEZER=y
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
CONFIG_PPC_NATIVE=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
CONFIG_PPC601_SYNC_FIX=y
# CONFIG_TAU is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
#
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_ARCH_HAS_WALK_MEMORY=y
CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
# CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
CONFIG_ARCH_FLATMEM_ENABLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_MIGRATION is not set
-# CONFIG_RESOURCES_64BIT is not set
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
CONFIG_PCCARD=m
# CONFIG_PCMCIA_DEBUG is not set
CONFIG_PCMCIA=m
CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
+# CONFIG_NETFILTER_XT_TARGET_LED is not set
CONFIG_NETFILTER_XT_TARGET_MARK=m
CONFIG_NETFILTER_XT_TARGET_NFLOG=m
CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
CONFIG_NETFILTER_XT_TARGET_TRACE=m
CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
CONFIG_NETFILTER_XT_MATCH_COMMENT=m
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
CONFIG_NETFILTER_XT_MATCH_ESP=m
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_HL=m
CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
CONFIG_NETFILTER_XT_MATCH_LENGTH=m
CONFIG_NETFILTER_XT_MATCH_LIMIT=m
CONFIG_IP_NF_ARP_MANGLE=m
CONFIG_IP_DCCP=m
CONFIG_INET_DCCP_DIAG=m
-CONFIG_IP_DCCP_ACKVEC=y
#
# DCCP CCIDs Configuration (EXPERIMENTAL)
#
-CONFIG_IP_DCCP_CCID2=m
# CONFIG_IP_DCCP_CCID2_DEBUG is not set
-CONFIG_IP_DCCP_CCID3=m
+CONFIG_IP_DCCP_CCID3=y
# CONFIG_IP_DCCP_CCID3_DEBUG is not set
CONFIG_IP_DCCP_CCID3_RTO=100
-CONFIG_IP_DCCP_TFRC_LIB=m
+CONFIG_IP_DCCP_TFRC_LIB=y
#
# DCCP Kernel Hacking
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
CONFIG_NET_CLS_ROUTE=y
+# CONFIG_DCB is not set
#
# Network testing
#
# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
CONFIG_IRDA=m
#
# Bluetooth device drivers
#
-CONFIG_BT_HCIUSB=m
-# CONFIG_BT_HCIUSB_SCO is not set
# CONFIG_BT_HCIBTUSB is not set
# CONFIG_BT_HCIUART is not set
CONFIG_BT_HCIBCM203X=m
# CONFIG_BT_HCIBTUART is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
-CONFIG_NL80211=y
+# CONFIG_CFG80211_REG_DEBUG is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
CONFIG_MAC80211=m
#
# Rate control algorithm selection
#
-CONFIG_MAC80211_RC_PID=y
-# CONFIG_MAC80211_RC_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT_PID=y
-# CONFIG_MAC80211_RC_DEFAULT_MINSTREL is not set
-CONFIG_MAC80211_RC_DEFAULT="pid"
+CONFIG_MAC80211_RC_MINSTREL=y
+# CONFIG_MAC80211_RC_DEFAULT_PID is not set
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel"
# CONFIG_MAC80211_MESH is not set
CONFIG_MAC80211_LEDS=y
+# CONFIG_MAC80211_DEBUGFS is not set
# CONFIG_MAC80211_DEBUG_MENU is not set
-CONFIG_IEEE80211=m
-# CONFIG_IEEE80211_DEBUG is not set
-CONFIG_IEEE80211_CRYPT_WEP=m
-CONFIG_IEEE80211_CRYPT_CCMP=m
-CONFIG_IEEE80211_CRYPT_TKIP=m
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
CONFIG_IDE_ATAPI=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y
# CONFIG_BLK_DEV_IDETAPE is not set
-CONFIG_BLK_DEV_IDESCSI=y
# CONFIG_IDE_TASK_IOCTL is not set
CONFIG_IDE_PROC_FS=y
# CONFIG_BLK_DEV_JMICRON is not set
# CONFIG_BLK_DEV_SC1200 is not set
# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
# CONFIG_BLK_DEV_IT8213 is not set
# CONFIG_BLK_DEV_IT821X is not set
# CONFIG_BLK_DEV_NS87415 is not set
# CONFIG_BLK_DEV_TC86C001 is not set
CONFIG_BLK_DEV_IDE_PMAC=y
CONFIG_BLK_DEV_IDE_PMAC_ATA100FIRST=y
-CONFIG_BLK_DEV_IDEDMA_PMAC=y
CONFIG_BLK_DEV_IDEDMA=y
#
# CONFIG_SCSI_SRP_ATTRS is not set
CONFIG_SCSI_LOWLEVEL=y
# CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_CXGB3_ISCSI is not set
# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
# CONFIG_SCSI_3W_9XXX is not set
# CONFIG_SCSI_ACARD is not set
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=m
# CONFIG_ANSLCD is not set
CONFIG_PMAC_RACKMETER=m
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
CONFIG_SUNGEM=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
+CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_CHELSIO_T3 is not set
# CONFIG_ENIC is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
# CONFIG_WLAN_PRE80211 is not set
CONFIG_WLAN_80211=y
# CONFIG_PCMCIA_RAYCS is not set
-# CONFIG_IPW2100 is not set
-# CONFIG_IPW2200 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
-CONFIG_HERMES=m
-CONFIG_APPLE_AIRPORT=m
-# CONFIG_PLX_HERMES is not set
-# CONFIG_TMD_HERMES is not set
-# CONFIG_NORTEL_HERMES is not set
-CONFIG_PCI_HERMES=m
-CONFIG_PCMCIA_HERMES=m
-# CONFIG_PCMCIA_SPECTRUM is not set
# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
CONFIG_PRISM54=m
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
CONFIG_P54_COMMON=m
# CONFIG_P54_USB is not set
# CONFIG_P54_PCI is not set
+CONFIG_P54_LEDS=y
# CONFIG_ATH5K is not set
# CONFIG_ATH9K is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWL3945 is not set
+# CONFIG_AR9170_USB is not set
+# CONFIG_IPW2100 is not set
+# CONFIG_IPW2200 is not set
+# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
CONFIG_B43=m
CONFIG_B43_PCI_AUTOSELECT=y
# CONFIG_B43LEGACY_PIO_MODE is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
+CONFIG_HERMES=m
+CONFIG_HERMES_CACHE_FW_ON_INIT=y
+CONFIG_APPLE_AIRPORT=m
+# CONFIG_PLX_HERMES is not set
+# CONFIG_TMD_HERMES is not set
+# CONFIG_NORTEL_HERMES is not set
+CONFIG_PCI_HERMES=m
+CONFIG_PCMCIA_HERMES=m
+# CONFIG_PCMCIA_SPECTRUM is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
CONFIG_USB_NET_CDCETHER=m
+# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
CONFIG_INPUT_MOUSE=y
# CONFIG_MOUSE_PS2 is not set
# CONFIG_MOUSE_SERIAL is not set
-# CONFIG_MOUSE_APPLETOUCH is not set
+CONFIG_MOUSE_APPLETOUCH=y
# CONFIG_MOUSE_BCM5974 is not set
# CONFIG_MOUSE_VSXXXAA is not set
# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_NVRAM=y
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
CONFIG_SSB=m
CONFIG_SSB_SPROM=y
CONFIG_SSB_PCIHOST_POSSIBLE=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
# CONFIG_MFD_WM8350_I2C is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_MFD_PCF50633 is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
#
# Multimedia devices
# CONFIG_FB_KYRO is not set
CONFIG_FB_3DFX=y
# CONFIG_FB_3DFX_ACCEL is not set
+CONFIG_FB_3DFX_I2C=y
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
CONFIG_LCD_CLASS_DEVICE=m
# CONFIG_LCD_ILI9320 is not set
# CONFIG_LCD_PLATFORM is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
-# CONFIG_BACKLIGHT_CORGI is not set
+CONFIG_BACKLIGHT_GENERIC=y
#
# Display device support
CONFIG_SND_PCM_OSS=m
CONFIG_SND_PCM_OSS_PLUGINS=y
CONFIG_SND_SEQUENCER_OSS=y
+# CONFIG_SND_HRTIMER is not set
# CONFIG_SND_DYNAMIC_MINORS is not set
CONFIG_SND_SUPPORT_OLD_API=y
CONFIG_SND_VERBOSE_PROCFS=y
# CONFIG_SND_VERBOSE_PRINTK is not set
# CONFIG_SND_DEBUG is not set
+CONFIG_SND_VMASTER=y
CONFIG_SND_DRIVERS=y
CONFIG_SND_DUMMY=m
# CONFIG_SND_VIRMIDI is not set
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
-CONFIG_HID_BRIGHT=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
-CONFIG_HID_DELL=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
CONFIG_HID_MICROSOFT=y
CONFIG_HID_MONTEREY=y
+CONFIG_HID_NTRIG=y
CONFIG_HID_PANTHERLORD=y
# CONFIG_PANTHERLORD_FF is not set
CONFIG_HID_PETALYNX=y
CONFIG_HID_SAMSUNG=y
CONFIG_HID_SONY=y
CONFIG_HID_SUNPLUS=y
+# CONFIG_GREENASIA_FF is not set
+CONFIG_HID_TOPSEED=y
# CONFIG_THRUSTMASTER_FF is not set
# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_HCD_PPC_OF is not set
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
# CONFIG_USB_STORAGE_JUMPSHOT is not set
# CONFIG_USB_STORAGE_ALAUDA is not set
-CONFIG_USB_STORAGE_ONETOUCH=y
+CONFIG_USB_STORAGE_ONETOUCH=m
# CONFIG_USB_STORAGE_KARMA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
# CONFIG_USB_SERIAL_FTDI_SIO is not set
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
+# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
# CONFIG_USB_SERIAL_OPTION is not set
# CONFIG_USB_SERIAL_OMNINET is not set
+# CONFIG_USB_SERIAL_OPTICON is not set
# CONFIG_USB_SERIAL_DEBUG is not set
#
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
CONFIG_USB_APPLEDISPLAY=m
# CONFIG_USB_ISIGHTFW is not set
# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# LED drivers
#
# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
# CONFIG_EXT4_FS_POSIX_ACL is not set
# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
CONFIG_JBD2=y
+# CONFIG_JBD2_DEBUG is not set
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_XFS_FS is not set
# CONFIG_GFS2_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
CONFIG_AUTOFS4_FS=m
CONFIG_FUSE_FS=m
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
CONFIG_HFS_FS=m
# CONFIG_BFS_FS is not set
# CONFIG_EFS_FS is not set
# CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC_CCITT=y
CONFIG_CRC16=y
CONFIG_CRC_T10DIF=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
CONFIG_TEXTSEARCH_BM=m
CONFIG_TEXTSEARCH_FSM=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_DEBUG_VM is not set
CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
CONFIG_XMON_DISASSEMBLY=y
CONFIG_DEBUGGER=y
CONFIG_IRQSTACKS=y
+# CONFIG_VIRQ_DEBUG is not set
# CONFIG_BDI_SWITCH is not set
CONFIG_BOOTX_TEXT=y
# CONFIG_PPC_EARLY_DEBUG is not set
#
# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=y
+CONFIG_CRYPTO_ALGAPI2=y
CONFIG_CRYPTO_AEAD=y
+CONFIG_CRYPTO_AEAD2=y
CONFIG_CRYPTO_BLKCIPHER=y
+CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
-CONFIG_CRYPTO_RNG=y
+CONFIG_CRYPTO_HASH2=y
+CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
* allocate the space "normally" and use the cache management functions
* to ensure it is consistent.
*/
-extern void *__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp);
+struct device;
+extern void *__dma_alloc_coherent(struct device *dev, size_t size,
+ dma_addr_t *handle, gfp_t gfp);
extern void __dma_free_coherent(size_t size, void *vaddr);
extern void __dma_sync(void *vaddr, size_t size, int direction);
extern void __dma_sync_page(struct page *page, unsigned long offset,
* Cache coherent cores.
*/
-#define __dma_alloc_coherent(gfp, size, handle) NULL
+#define __dma_alloc_coherent(dev, gfp, size, handle) NULL
#define __dma_free_coherent(size, addr) ((void)0)
#define __dma_sync(addr, size, rw) ((void)0)
#define __dma_sync_page(pg, off, sz, rw) ((void)0)
#ifndef _ASM_FIXMAP_H
#define _ASM_FIXMAP_H
-extern unsigned long FIXADDR_TOP;
-
#ifndef __ASSEMBLY__
#include <linux/kernel.h>
#include <asm/page.h>
#include <asm/kmap_types.h>
#endif
+#define FIXADDR_TOP ((unsigned long)(-PAGE_SIZE))
+
/*
* Here we define all the compile-time 'special' virtual
* addresses. The point is to have a constant address at
extern unsigned long va_to_phys(unsigned long address);
extern pte_t *va_to_pte(unsigned long address);
-extern unsigned long ioremap_bot, ioremap_base;
+extern unsigned long ioremap_bot;
#ifdef CONFIG_44x
extern int icache_44x_need_flush;
#define pgd_ERROR(e) \
printk("%s:%d: bad pgd %08lx.\n", __FILE__, __LINE__, pgd_val(e))
+/*
+ * This is the bottom of the PKMAP area with HIGHMEM or an arbitrary
+ * value (for now) on others, from where we can start layout kernel
+ * virtual space that goes below PKMAP and FIXMAP
+ */
+#ifdef CONFIG_HIGHMEM
+#define KVIRT_TOP PKMAP_BASE
+#else
+#define KVIRT_TOP (0xfe000000UL) /* for now, could be FIXMAP_BASE ? */
+#endif
+
+/*
+ * ioremap_bot starts at that address. Early ioremaps move down from there,
+ * until mem_init() at which point this becomes the top of the vmalloc
+ * and ioremap space
+ */
+#ifdef CONFIG_NOT_COHERENT_CACHE
+#define IOREMAP_TOP ((KVIRT_TOP - CONFIG_CONSISTENT_SIZE) & PAGE_MASK)
+#else
+#define IOREMAP_TOP KVIRT_TOP
+#endif
+
/*
* Just any arbitrary offset to the start of the vmalloc VM area: the
- * current 64MB value just means that there will be a 64MB "hole" after the
+ * current 16MB value just means that there will be a 64MB "hole" after the
* physical memory until the kernel virtual memory starts. That means that
* any out-of-bounds memory accesses will hopefully be caught.
* The vmalloc() routines leaves a hole of 4kB between each vmalloced
{
void *ret;
#ifdef CONFIG_NOT_COHERENT_CACHE
- ret = __dma_alloc_coherent(size, dma_handle, flag);
+ ret = __dma_alloc_coherent(dev, size, dma_handle, flag);
if (ret == NULL)
return NULL;
*dma_handle += get_dma_direct_offset(dev);
memcpy_64.o usercopy_64.o mem_64.o string.o
obj-$(CONFIG_XMON) += sstep.o
obj-$(CONFIG_KPROBES) += sstep.o
-obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
ifeq ($(CONFIG_PPC64),y)
obj-$(CONFIG_SMP) += locks.o
+++ /dev/null
-/*
- * PowerPC version derived from arch/arm/mm/consistent.c
- * Copyright (C) 2001 Dan Malek (dmalek@jlc.net)
- *
- * Copyright (C) 2000 Russell King
- *
- * Consistent memory allocators. Used for DMA devices that want to
- * share uncached memory with the processor core. The function return
- * is the virtual address and 'dma_handle' is the physical address.
- * Mostly stolen from the ARM port, with some changes for PowerPC.
- * -- Dan
- *
- * Reorganized to get rid of the arch-specific consistent_* functions
- * and provide non-coherent implementations for the DMA API. -Matt
- *
- * Added in_interrupt() safe dma_alloc_coherent()/dma_free_coherent()
- * implementation. This is pulled straight from ARM and barely
- * modified. -Matt
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/sched.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/string.h>
-#include <linux/types.h>
-#include <linux/highmem.h>
-#include <linux/dma-mapping.h>
-#include <linux/vmalloc.h>
-
-#include <asm/tlbflush.h>
-
-/*
- * Allocate DMA-coherent memory space and return both the kernel remapped
- * virtual and bus address for that space.
- */
-void *
-__dma_alloc_coherent(size_t size, dma_addr_t *handle, gfp_t gfp)
-{
- struct page *page;
- unsigned long order;
- int i;
- unsigned int nr_pages = PAGE_ALIGN(size)>>PAGE_SHIFT;
- unsigned int array_size = nr_pages * sizeof(struct page *);
- struct page **pages;
- struct page *end;
- u64 mask = 0x00ffffff, limit; /* ISA default */
- struct vm_struct *area;
-
- BUG_ON(!mem_init_done);
- size = PAGE_ALIGN(size);
- limit = (mask + 1) & ~mask;
- if (limit && size >= limit) {
- printk(KERN_WARNING "coherent allocation too big (requested "
- "%#x mask %#Lx)\n", size, mask);
- return NULL;
- }
-
- order = get_order(size);
-
- if (mask != 0xffffffff)
- gfp |= GFP_DMA;
-
- page = alloc_pages(gfp, order);
- if (!page)
- goto no_page;
-
- end = page + (1 << order);
-
- /*
- * Invalidate any data that might be lurking in the
- * kernel direct-mapped region for device DMA.
- */
- {
- unsigned long kaddr = (unsigned long)page_address(page);
- memset(page_address(page), 0, size);
- flush_dcache_range(kaddr, kaddr + size);
- }
-
- split_page(page, order);
-
- /*
- * Set the "dma handle"
- */
- *handle = page_to_phys(page);
-
- area = get_vm_area_caller(size, VM_IOREMAP,
- __builtin_return_address(1));
- if (!area)
- goto out_free_pages;
-
- if (array_size > PAGE_SIZE) {
- pages = vmalloc(array_size);
- area->flags |= VM_VPAGES;
- } else {
- pages = kmalloc(array_size, GFP_KERNEL);
- }
- if (!pages)
- goto out_free_area;
-
- area->pages = pages;
- area->nr_pages = nr_pages;
-
- for (i = 0; i < nr_pages; i++)
- pages[i] = page + i;
-
- if (map_vm_area(area, pgprot_noncached(PAGE_KERNEL), &pages))
- goto out_unmap;
-
- /*
- * Free the otherwise unused pages.
- */
- page += nr_pages;
- while (page < end) {
- __free_page(page);
- page++;
- }
-
- return area->addr;
-out_unmap:
- vunmap(area->addr);
- if (array_size > PAGE_SIZE)
- vfree(pages);
- else
- kfree(pages);
- goto out_free_pages;
-out_free_area:
- free_vm_area(area);
-out_free_pages:
- if (page)
- __free_pages(page, order);
-no_page:
- return NULL;
-}
-EXPORT_SYMBOL(__dma_alloc_coherent);
-
-/*
- * free a page as defined by the above mapping.
- */
-void __dma_free_coherent(size_t size, void *vaddr)
-{
- vfree(vaddr);
-
-}
-EXPORT_SYMBOL(__dma_free_coherent);
-
-/*
- * make an area consistent.
- */
-void __dma_sync(void *vaddr, size_t size, int direction)
-{
- unsigned long start = (unsigned long)vaddr;
- unsigned long end = start + size;
-
- switch (direction) {
- case DMA_NONE:
- BUG();
- case DMA_FROM_DEVICE:
- /*
- * invalidate only when cache-line aligned otherwise there is
- * the potential for discarding uncommitted data from the cache
- */
- if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1)))
- flush_dcache_range(start, end);
- else
- invalidate_dcache_range(start, end);
- break;
- case DMA_TO_DEVICE: /* writeback only */
- clean_dcache_range(start, end);
- break;
- case DMA_BIDIRECTIONAL: /* writeback and invalidate */
- flush_dcache_range(start, end);
- break;
- }
-}
-EXPORT_SYMBOL(__dma_sync);
-
-#ifdef CONFIG_HIGHMEM
-/*
- * __dma_sync_page() implementation for systems using highmem.
- * In this case, each page of a buffer must be kmapped/kunmapped
- * in order to have a virtual address for __dma_sync(). This must
- * not sleep so kmap_atomic()/kunmap_atomic() are used.
- *
- * Note: yes, it is possible and correct to have a buffer extend
- * beyond the first page.
- */
-static inline void __dma_sync_page_highmem(struct page *page,
- unsigned long offset, size_t size, int direction)
-{
- size_t seg_size = min((size_t)(PAGE_SIZE - offset), size);
- size_t cur_size = seg_size;
- unsigned long flags, start, seg_offset = offset;
- int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE;
- int seg_nr = 0;
-
- local_irq_save(flags);
-
- do {
- start = (unsigned long)kmap_atomic(page + seg_nr,
- KM_PPC_SYNC_PAGE) + seg_offset;
-
- /* Sync this buffer segment */
- __dma_sync((void *)start, seg_size, direction);
- kunmap_atomic((void *)start, KM_PPC_SYNC_PAGE);
- seg_nr++;
-
- /* Calculate next buffer segment size */
- seg_size = min((size_t)PAGE_SIZE, size - cur_size);
-
- /* Add the segment size to our running total */
- cur_size += seg_size;
- seg_offset = 0;
- } while (seg_nr < nr_segs);
-
- local_irq_restore(flags);
-}
-#endif /* CONFIG_HIGHMEM */
-
-/*
- * __dma_sync_page makes memory consistent. identical to __dma_sync, but
- * takes a struct page instead of a virtual address
- */
-void __dma_sync_page(struct page *page, unsigned long offset,
- size_t size, int direction)
-{
-#ifdef CONFIG_HIGHMEM
- __dma_sync_page_highmem(page, offset, size, direction);
-#else
- unsigned long start = (unsigned long)page_address(page) + offset;
- __dma_sync((void *)start, size, direction);
-#endif
-}
-EXPORT_SYMBOL(__dma_sync_page);
obj-$(CONFIG_PPC_MM_SLICES) += slice.o
obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o
obj-$(CONFIG_PPC_SUBPAGE_PROT) += subpage-prot.o
+obj-$(CONFIG_NOT_COHERENT_CACHE) += dma-noncoherent.o
--- /dev/null
+/*
+ * PowerPC version derived from arch/arm/mm/consistent.c
+ * Copyright (C) 2001 Dan Malek (dmalek@jlc.net)
+ *
+ * Copyright (C) 2000 Russell King
+ *
+ * Consistent memory allocators. Used for DMA devices that want to
+ * share uncached memory with the processor core. The function return
+ * is the virtual address and 'dma_handle' is the physical address.
+ * Mostly stolen from the ARM port, with some changes for PowerPC.
+ * -- Dan
+ *
+ * Reorganized to get rid of the arch-specific consistent_* functions
+ * and provide non-coherent implementations for the DMA API. -Matt
+ *
+ * Added in_interrupt() safe dma_alloc_coherent()/dma_free_coherent()
+ * implementation. This is pulled straight from ARM and barely
+ * modified. -Matt
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/types.h>
+#include <linux/highmem.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/tlbflush.h>
+
+#include "mmu_decl.h"
+
+/*
+ * This address range defaults to a value that is safe for all
+ * platforms which currently set CONFIG_NOT_COHERENT_CACHE. It
+ * can be further configured for specific applications under
+ * the "Advanced Setup" menu. -Matt
+ */
+#define CONSISTENT_BASE (IOREMAP_TOP)
+#define CONSISTENT_END (CONSISTENT_BASE + CONFIG_CONSISTENT_SIZE)
+#define CONSISTENT_OFFSET(x) (((unsigned long)(x) - CONSISTENT_BASE) >> PAGE_SHIFT)
+
+/*
+ * This is the page table (2MB) covering uncached, DMA consistent allocations
+ */
+static DEFINE_SPINLOCK(consistent_lock);
+
+/*
+ * VM region handling support.
+ *
+ * This should become something generic, handling VM region allocations for
+ * vmalloc and similar (ioremap, module space, etc).
+ *
+ * I envisage vmalloc()'s supporting vm_struct becoming:
+ *
+ * struct vm_struct {
+ * struct vm_region region;
+ * unsigned long flags;
+ * struct page **pages;
+ * unsigned int nr_pages;
+ * unsigned long phys_addr;
+ * };
+ *
+ * get_vm_area() would then call vm_region_alloc with an appropriate
+ * struct vm_region head (eg):
+ *
+ * struct vm_region vmalloc_head = {
+ * .vm_list = LIST_HEAD_INIT(vmalloc_head.vm_list),
+ * .vm_start = VMALLOC_START,
+ * .vm_end = VMALLOC_END,
+ * };
+ *
+ * However, vmalloc_head.vm_start is variable (typically, it is dependent on
+ * the amount of RAM found at boot time.) I would imagine that get_vm_area()
+ * would have to initialise this each time prior to calling vm_region_alloc().
+ */
+struct ppc_vm_region {
+ struct list_head vm_list;
+ unsigned long vm_start;
+ unsigned long vm_end;
+};
+
+static struct ppc_vm_region consistent_head = {
+ .vm_list = LIST_HEAD_INIT(consistent_head.vm_list),
+ .vm_start = CONSISTENT_BASE,
+ .vm_end = CONSISTENT_END,
+};
+
+static struct ppc_vm_region *
+ppc_vm_region_alloc(struct ppc_vm_region *head, size_t size, gfp_t gfp)
+{
+ unsigned long addr = head->vm_start, end = head->vm_end - size;
+ unsigned long flags;
+ struct ppc_vm_region *c, *new;
+
+ new = kmalloc(sizeof(struct ppc_vm_region), gfp);
+ if (!new)
+ goto out;
+
+ spin_lock_irqsave(&consistent_lock, flags);
+
+ list_for_each_entry(c, &head->vm_list, vm_list) {
+ if ((addr + size) < addr)
+ goto nospc;
+ if ((addr + size) <= c->vm_start)
+ goto found;
+ addr = c->vm_end;
+ if (addr > end)
+ goto nospc;
+ }
+
+ found:
+ /*
+ * Insert this entry _before_ the one we found.
+ */
+ list_add_tail(&new->vm_list, &c->vm_list);
+ new->vm_start = addr;
+ new->vm_end = addr + size;
+
+ spin_unlock_irqrestore(&consistent_lock, flags);
+ return new;
+
+ nospc:
+ spin_unlock_irqrestore(&consistent_lock, flags);
+ kfree(new);
+ out:
+ return NULL;
+}
+
+static struct ppc_vm_region *ppc_vm_region_find(struct ppc_vm_region *head, unsigned long addr)
+{
+ struct ppc_vm_region *c;
+
+ list_for_each_entry(c, &head->vm_list, vm_list) {
+ if (c->vm_start == addr)
+ goto out;
+ }
+ c = NULL;
+ out:
+ return c;
+}
+
+/*
+ * Allocate DMA-coherent memory space and return both the kernel remapped
+ * virtual and bus address for that space.
+ */
+void *
+__dma_alloc_coherent(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp)
+{
+ struct page *page;
+ struct ppc_vm_region *c;
+ unsigned long order;
+ u64 mask = ISA_DMA_THRESHOLD, limit;
+
+ if (dev) {
+ mask = dev->coherent_dma_mask;
+
+ /*
+ * Sanity check the DMA mask - it must be non-zero, and
+ * must be able to be satisfied by a DMA allocation.
+ */
+ if (mask == 0) {
+ dev_warn(dev, "coherent DMA mask is unset\n");
+ goto no_page;
+ }
+
+ if ((~mask) & ISA_DMA_THRESHOLD) {
+ dev_warn(dev, "coherent DMA mask %#llx is smaller "
+ "than system GFP_DMA mask %#llx\n",
+ mask, (unsigned long long)ISA_DMA_THRESHOLD);
+ goto no_page;
+ }
+ }
+
+
+ size = PAGE_ALIGN(size);
+ limit = (mask + 1) & ~mask;
+ if ((limit && size >= limit) ||
+ size >= (CONSISTENT_END - CONSISTENT_BASE)) {
+ printk(KERN_WARNING "coherent allocation too big (requested %#x mask %#Lx)\n",
+ size, mask);
+ return NULL;
+ }
+
+ order = get_order(size);
+
+ /* Might be useful if we ever have a real legacy DMA zone... */
+ if (mask != 0xffffffff)
+ gfp |= GFP_DMA;
+
+ page = alloc_pages(gfp, order);
+ if (!page)
+ goto no_page;
+
+ /*
+ * Invalidate any data that might be lurking in the
+ * kernel direct-mapped region for device DMA.
+ */
+ {
+ unsigned long kaddr = (unsigned long)page_address(page);
+ memset(page_address(page), 0, size);
+ flush_dcache_range(kaddr, kaddr + size);
+ }
+
+ /*
+ * Allocate a virtual address in the consistent mapping region.
+ */
+ c = ppc_vm_region_alloc(&consistent_head, size,
+ gfp & ~(__GFP_DMA | __GFP_HIGHMEM));
+ if (c) {
+ unsigned long vaddr = c->vm_start;
+ struct page *end = page + (1 << order);
+
+ split_page(page, order);
+
+ /*
+ * Set the "dma handle"
+ */
+ *handle = page_to_phys(page);
+
+ do {
+ SetPageReserved(page);
+ map_page(vaddr, page_to_phys(page),
+ pgprot_noncached(PAGE_KERNEL));
+ page++;
+ vaddr += PAGE_SIZE;
+ } while (size -= PAGE_SIZE);
+
+ /*
+ * Free the otherwise unused pages.
+ */
+ while (page < end) {
+ __free_page(page);
+ page++;
+ }
+
+ return (void *)c->vm_start;
+ }
+
+ if (page)
+ __free_pages(page, order);
+ no_page:
+ return NULL;
+}
+EXPORT_SYMBOL(__dma_alloc_coherent);
+
+/*
+ * free a page as defined by the above mapping.
+ */
+void __dma_free_coherent(size_t size, void *vaddr)
+{
+ struct ppc_vm_region *c;
+ unsigned long flags, addr;
+
+ size = PAGE_ALIGN(size);
+
+ spin_lock_irqsave(&consistent_lock, flags);
+
+ c = ppc_vm_region_find(&consistent_head, (unsigned long)vaddr);
+ if (!c)
+ goto no_area;
+
+ if ((c->vm_end - c->vm_start) != size) {
+ printk(KERN_ERR "%s: freeing wrong coherent size (%ld != %d)\n",
+ __func__, c->vm_end - c->vm_start, size);
+ dump_stack();
+ size = c->vm_end - c->vm_start;
+ }
+
+ addr = c->vm_start;
+ do {
+ pte_t *ptep;
+ unsigned long pfn;
+
+ ptep = pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(addr),
+ addr),
+ addr),
+ addr);
+ if (!pte_none(*ptep) && pte_present(*ptep)) {
+ pfn = pte_pfn(*ptep);
+ pte_clear(&init_mm, addr, ptep);
+ if (pfn_valid(pfn)) {
+ struct page *page = pfn_to_page(pfn);
+
+ ClearPageReserved(page);
+ __free_page(page);
+ }
+ }
+ addr += PAGE_SIZE;
+ } while (size -= PAGE_SIZE);
+
+ flush_tlb_kernel_range(c->vm_start, c->vm_end);
+
+ list_del(&c->vm_list);
+
+ spin_unlock_irqrestore(&consistent_lock, flags);
+
+ kfree(c);
+ return;
+
+ no_area:
+ spin_unlock_irqrestore(&consistent_lock, flags);
+ printk(KERN_ERR "%s: trying to free invalid coherent area: %p\n",
+ __func__, vaddr);
+ dump_stack();
+}
+EXPORT_SYMBOL(__dma_free_coherent);
+
+/*
+ * make an area consistent.
+ */
+void __dma_sync(void *vaddr, size_t size, int direction)
+{
+ unsigned long start = (unsigned long)vaddr;
+ unsigned long end = start + size;
+
+ switch (direction) {
+ case DMA_NONE:
+ BUG();
+ case DMA_FROM_DEVICE:
+ /*
+ * invalidate only when cache-line aligned otherwise there is
+ * the potential for discarding uncommitted data from the cache
+ */
+ if ((start & (L1_CACHE_BYTES - 1)) || (size & (L1_CACHE_BYTES - 1)))
+ flush_dcache_range(start, end);
+ else
+ invalidate_dcache_range(start, end);
+ break;
+ case DMA_TO_DEVICE: /* writeback only */
+ clean_dcache_range(start, end);
+ break;
+ case DMA_BIDIRECTIONAL: /* writeback and invalidate */
+ flush_dcache_range(start, end);
+ break;
+ }
+}
+EXPORT_SYMBOL(__dma_sync);
+
+#ifdef CONFIG_HIGHMEM
+/*
+ * __dma_sync_page() implementation for systems using highmem.
+ * In this case, each page of a buffer must be kmapped/kunmapped
+ * in order to have a virtual address for __dma_sync(). This must
+ * not sleep so kmap_atomic()/kunmap_atomic() are used.
+ *
+ * Note: yes, it is possible and correct to have a buffer extend
+ * beyond the first page.
+ */
+static inline void __dma_sync_page_highmem(struct page *page,
+ unsigned long offset, size_t size, int direction)
+{
+ size_t seg_size = min((size_t)(PAGE_SIZE - offset), size);
+ size_t cur_size = seg_size;
+ unsigned long flags, start, seg_offset = offset;
+ int nr_segs = 1 + ((size - seg_size) + PAGE_SIZE - 1)/PAGE_SIZE;
+ int seg_nr = 0;
+
+ local_irq_save(flags);
+
+ do {
+ start = (unsigned long)kmap_atomic(page + seg_nr,
+ KM_PPC_SYNC_PAGE) + seg_offset;
+
+ /* Sync this buffer segment */
+ __dma_sync((void *)start, seg_size, direction);
+ kunmap_atomic((void *)start, KM_PPC_SYNC_PAGE);
+ seg_nr++;
+
+ /* Calculate next buffer segment size */
+ seg_size = min((size_t)PAGE_SIZE, size - cur_size);
+
+ /* Add the segment size to our running total */
+ cur_size += seg_size;
+ seg_offset = 0;
+ } while (seg_nr < nr_segs);
+
+ local_irq_restore(flags);
+}
+#endif /* CONFIG_HIGHMEM */
+
+/*
+ * __dma_sync_page makes memory consistent. identical to __dma_sync, but
+ * takes a struct page instead of a virtual address
+ */
+void __dma_sync_page(struct page *page, unsigned long offset,
+ size_t size, int direction)
+{
+#ifdef CONFIG_HIGHMEM
+ __dma_sync_page_highmem(page, offset, size, direction);
+#else
+ unsigned long start = (unsigned long)page_address(page) + offset;
+ __dma_sync((void *)start, size, direction);
+#endif
+}
+EXPORT_SYMBOL(__dma_sync_page);
ppc_md.progress("MMU:mapin", 0x301);
mapin_ram();
-#ifdef CONFIG_HIGHMEM
- ioremap_base = PKMAP_BASE;
-#else
- ioremap_base = 0xfe000000UL; /* for now, could be 0xfffff000 */
-#endif /* CONFIG_HIGHMEM */
- ioremap_bot = ioremap_base;
+ /* Initialize early top-down ioremap allocator */
+ ioremap_bot = IOREMAP_TOP;
/* Map in I/O resources */
if (ppc_md.progress)
bsssize >> 10,
initsize >> 10);
+#ifdef CONFIG_PPC32
+ pr_info("Kernel virtual memory layout:\n");
+ pr_info(" * 0x%08lx..0x%08lx : fixmap\n", FIXADDR_START, FIXADDR_TOP);
+#ifdef CONFIG_HIGHMEM
+ pr_info(" * 0x%08lx..0x%08lx : highmem PTEs\n",
+ PKMAP_BASE, PKMAP_ADDR(LAST_PKMAP));
+#endif /* CONFIG_HIGHMEM */
+#ifdef CONFIG_NOT_COHERENT_CACHE
+ pr_info(" * 0x%08lx..0x%08lx : consistent mem\n",
+ IOREMAP_TOP, IOREMAP_TOP + CONFIG_CONSISTENT_SIZE);
+#endif /* CONFIG_NOT_COHERENT_CACHE */
+ pr_info(" * 0x%08lx..0x%08lx : early ioremap\n",
+ ioremap_bot, IOREMAP_TOP);
+ pr_info(" * 0x%08lx..0x%08lx : vmalloc & ioremap\n",
+ VMALLOC_START, VMALLOC_END);
+#endif /* CONFIG_PPC32 */
+
mem_init_done = 1;
}
#endif /* CONFIG_DEBUG_PAGEALLOC */
static int fixmaps;
-unsigned long FIXADDR_TOP = (-PAGE_SIZE);
-EXPORT_SYMBOL(FIXADDR_TOP);
void __set_fixmap (enum fixed_addresses idx, phys_addr_t phys, pgprot_t flags)
{
lpar_xirr_info_set((0xff << 24) | irq);
}
-static void xics_set_affinity(unsigned int virq, const struct cpumask *cpumask)
+static int xics_set_affinity(unsigned int virq, const struct cpumask *cpumask)
{
unsigned int irq;
int status;
irq = (unsigned int)irq_map[virq].hwirq;
if (irq == XICS_IPI || irq == XICS_IRQ_SPURIOUS)
- return;
+ return -1;
status = rtas_call(ibm_get_xive, 1, 3, xics_status, irq);
if (status) {
printk(KERN_ERR "%s: ibm,get-xive irq=%u returns %d\n",
__func__, irq, status);
- return;
+ return -1;
}
/*
printk(KERN_WARNING
"%s: No online cpus in the mask %s for irq %d\n",
__func__, cpulist, virq);
- return;
+ return -1;
}
status = rtas_call(ibm_set_xive, 3, 1, NULL,
if (status) {
printk(KERN_ERR "%s: ibm,set-xive irq=%u returns %d\n",
__func__, irq, status);
- return;
+ return -1;
}
+
+ return 0;
}
static struct irq_chip xics_pic_direct = {
#endif /* CONFIG_SMP */
-void mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
+int mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask)
{
struct mpic *mpic = mpic_from_irq(irq);
unsigned int src = mpic_irq_to_hw(irq);
mpic_irq_write(src, MPIC_INFO(IRQ_DESTINATION),
mpic_physmask(cpus_addr(tmp)[0]));
}
+
+ return 0;
}
static unsigned int mpic_type_to_vecpri(struct mpic *mpic, unsigned int type)
extern int mpic_set_irq_type(unsigned int virq, unsigned int flow_type);
extern void mpic_set_vector(unsigned int virq, unsigned int vector);
-extern void mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask);
+extern int mpic_set_affinity(unsigned int irq, const struct cpumask *cpumask);
#endif /* _POWERPC_SYSDEV_MPIC_H */
#ifndef __ASM_SH_FLAT_H
#define __ASM_SH_FLAT_H
-#define flat_stack_align(sp) /* nothing needed */
#define flat_argvp_envp_on_stack() 0
#define flat_old_ram_flag(flags) (flags)
#define flat_reloc_valid(reloc, size) ((reloc) <= (size))
else \
clear_thread_flag(TIF_ABI_PENDING); \
/* flush_thread will update pgd cache */ \
- if (current->personality != PER_LINUX32) \
- set_personality(PER_LINUX); \
+ if (personality(current->personality) != PER_LINUX32) \
+ set_personality(PER_LINUX | \
+ (current->personality & (~PER_MASK))); \
} while (0)
#endif /* !(__ASM_SPARC64_ELF_H) */
}
}
-static void sun4u_set_affinity(unsigned int virt_irq,
+static int sun4u_set_affinity(unsigned int virt_irq,
const struct cpumask *mask)
{
sun4u_irq_enable(virt_irq);
+
+ return 0;
}
/* Don't do anything. The desc->status check for IRQ_DISABLED in
ino, err);
}
-static void sun4v_set_affinity(unsigned int virt_irq,
+static int sun4v_set_affinity(unsigned int virt_irq,
const struct cpumask *mask)
{
unsigned int ino = virt_irq_table[virt_irq].dev_ino;
if (err != HV_EOK)
printk(KERN_ERR "sun4v_intr_settarget(%x,%lu): "
"err(%d)\n", ino, cpuid, err);
+
+ return 0;
}
static void sun4v_irq_disable(unsigned int virt_irq)
dev_handle, dev_ino, err);
}
-static void sun4v_virt_set_affinity(unsigned int virt_irq,
+static int sun4v_virt_set_affinity(unsigned int virt_irq,
const struct cpumask *mask)
{
unsigned long cpuid, dev_handle, dev_ino;
printk(KERN_ERR "sun4v_vintr_set_target(%lx,%lx,%lu): "
"err(%d)\n",
dev_handle, dev_ino, cpuid, err);
+
+ return 0;
}
static void sun4v_virq_disable(unsigned int virt_irq)
#define EX_LD(x) \
98: x; \
- .section .fixup; \
+ .section .fixup, "ax"; \
.align 4; \
99: retl; \
mov -1, %o0; \
#define EX_ST(x) \
98: x; \
- .section .fixup; \
+ .section .fixup,"ax"; \
.align 4; \
99: retl; \
mov -1, %o0; \
--- /dev/null
+
+obj-$(CONFIG_KVM) += kvm/
+
+# Xen paravirtualization support
+obj-$(CONFIG_XEN) += xen/
+
+# lguest paravirtualization support
+obj-$(CONFIG_LGUEST_GUEST) += lguest/
+
+obj-y += kernel/
+obj-y += mm/
+
+obj-y += crypto/
+obj-y += vdso/
+obj-$(CONFIG_IA32_EMULATION) += ia32/
+
select HAVE_KERNEL_BZIP2
select HAVE_KERNEL_LZMA
+config OUTPUT_FORMAT
+ string
+ default "elf32-i386" if X86_32
+ default "elf64-x86-64" if X86_64
+
config ARCH_DEFCONFIG
string
default "arch/x86/configs/i386_defconfig" if X86_32
If you don't know what to do here, say N.
-config NUMA_MIGRATE_IRQ_DESC
- bool "Move irq desc when changing irq smp_affinity"
+config NUMA_IRQ_DESC
+ def_bool y
depends on SPARSE_IRQ && NUMA
- depends on BROKEN
- default n
- ---help---
- This enables moving irq_desc to cpu/node that irq will use handled.
-
- If you don't know what to do here, say N.
config X86_MPPARSE
bool "Enable MPS table" if ACPI
depends on X86_64
depends on X86_EXTENDED_PLATFORM
depends on NUMA
- select X86_X2APIC
+ depends on X86_X2APIC
---help---
This option is needed in order to support SGI Ultraviolet systems.
If you don't have one of these, you should say N here.
config PHYSICAL_START
hex "Physical address where the kernel is loaded" if (EMBEDDED || CRASH_DUMP)
- default "0x1000000" if X86_NUMAQ
- default "0x200000" if X86_64
- default "0x100000"
+ default "0x1000000"
---help---
This gives the physical address where the kernel is loaded.
to be specifically compiled to run from a specific memory area
(normally a reserved region) and this option comes handy.
- So if you are using bzImage for capturing the crash dump, leave
- the value here unchanged to 0x100000 and set CONFIG_RELOCATABLE=y.
- Otherwise if you plan to use vmlinux for capturing the crash dump
- change this value to start of the reserved region (Typically 16MB
- 0x1000000). In other words, it can be set based on the "X" value as
- specified in the "crashkernel=YM@XM" command line boot parameter
- passed to the panic-ed kernel. Typically this parameter is set as
- crashkernel=64M@16M. Please take a look at
- Documentation/kdump/kdump.txt for more details about crash dumps.
+ So if you are using bzImage for capturing the crash dump,
+ leave the value here unchanged to 0x1000000 and set
+ CONFIG_RELOCATABLE=y. Otherwise if you plan to use vmlinux
+ for capturing the crash dump change this value to start of
+ the reserved region. In other words, it can be set based on
+ the "X" value as specified in the "crashkernel=YM@XM"
+ command line boot parameter passed to the panic-ed
+ kernel. Please take a look at Documentation/kdump/kdump.txt
+ for more details about crash dumps.
Usage of bzImage for capturing the crash dump is recommended as
one does not have to build two kernels. Same kernel can be used
Don't change this unless you know what you are doing.
config RELOCATABLE
- bool "Build a relocatable kernel (EXPERIMENTAL)"
- depends on EXPERIMENTAL
+ bool "Build a relocatable kernel"
+ default y
---help---
This builds a kernel image that retains relocation information
so it can be loaded someplace besides the default 1MB.
it has been loaded at and the compile time physical address
(CONFIG_PHYSICAL_START) is ignored.
+# Relocation on x86-32 needs some additional build support
+config X86_NEED_RELOCS
+ def_bool y
+ depends on X86_32 && RELOCATABLE
+
config PHYSICAL_ALIGN
hex
prompt "Alignment value to which kernel should be aligned" if X86_32
- default "0x100000" if X86_32
- default "0x200000" if X86_64
- range 0x2000 0x400000
+ default "0x1000000"
+ range 0x2000 0x1000000
---help---
This value puts the alignment restrictions on physical address
where kernel is loaded and run from. Kernel is compiled for an
KBUILD_DEFCONFIG := $(ARCH)_defconfig
endif
-core-$(CONFIG_KVM) += arch/x86/kvm/
-
# BITS is used as extension for files which are available in a 32 bit
# and a 64 bit version to simplify shared Makefiles.
# e.g.: obj-y += foo_$(BITS).o
libs-y += arch/x86/lib/
-# Sub architecture files that needs linking first
-core-y += $(fcore-y)
-
-# Xen paravirtualization support
-core-$(CONFIG_XEN) += arch/x86/xen/
-
-# lguest paravirtualization support
-core-$(CONFIG_LGUEST_GUEST) += arch/x86/lguest/
-
-core-y += arch/x86/kernel/
-core-y += arch/x86/mm/
-
-core-y += arch/x86/crypto/
-core-y += arch/x86/vdso/
-core-$(CONFIG_IA32_EMULATION) += arch/x86/ia32/
+# See arch/x86/Kbuild for content of core part of the kernel
+core-y += arch/x86/
# drivers-y are linked after core-y
drivers-$(CONFIG_MATH_EMULATION) += arch/x86/math-emu/
cpustr.h
mkcpustr
offsets.h
+voffset.h
+zoffset.h
setup
setup.bin
setup.elf
targets += fdimage fdimage144 fdimage288 image.iso mtools.conf
subdir- := compressed
-setup-y += a20.o cmdline.o copy.o cpu.o cpucheck.o edd.o
+setup-y += a20.o bioscall.o cmdline.o copy.o cpu.o cpucheck.o edd.o
setup-y += header.o main.o mca.o memory.o pm.o pmjump.o
-setup-y += printf.o string.o tty.o video.o video-mode.o version.o
+setup-y += printf.o regs.o string.o tty.o video.o video-mode.o
+setup-y += version.o
setup-$(CONFIG_X86_APM_BOOT) += apm.o
# The link order of the video-*.o modules can matter. In particular,
SETUP_OBJS = $(addprefix $(obj)/,$(setup-y))
-sed-offsets := -e 's/^00*/0/' \
- -e 's/^\([0-9a-fA-F]*\) . \(input_data\|input_data_end\)$$/\#define \2 0x\1/p'
+sed-voffset := -e 's/^\([0-9a-fA-F]*\) . \(_text\|_end\)$$/\#define VO_\2 0x\1/p'
-quiet_cmd_offsets = OFFSETS $@
- cmd_offsets = $(NM) $< | sed -n $(sed-offsets) > $@
+quiet_cmd_voffset = VOFFSET $@
+ cmd_voffset = $(NM) $< | sed -n $(sed-voffset) > $@
-$(obj)/offsets.h: $(obj)/compressed/vmlinux FORCE
- $(call if_changed,offsets)
+targets += voffset.h
+$(obj)/voffset.h: vmlinux FORCE
+ $(call if_changed,voffset)
+
+sed-zoffset := -e 's/^\([0-9a-fA-F]*\) . \(startup_32\|input_data\|_end\|z_.*\)$$/\#define ZO_\2 0x\1/p'
+
+quiet_cmd_zoffset = ZOFFSET $@
+ cmd_zoffset = $(NM) $< | sed -n $(sed-zoffset) > $@
+
+targets += zoffset.h
+$(obj)/zoffset.h: $(obj)/compressed/vmlinux FORCE
+ $(call if_changed,zoffset)
-targets += offsets.h
AFLAGS_header.o += -I$(obj)
-$(obj)/header.o: $(obj)/offsets.h
+$(obj)/header.o: $(obj)/voffset.h $(obj)/zoffset.h
LDFLAGS_setup.elf := -T
$(obj)/setup.elf: $(src)/setup.ld $(SETUP_OBJS) FORCE
*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright 2007-2008 rPath, Inc. - All Rights Reserved
- * Copyright 2009 Intel Corporation
+ * Copyright 2009 Intel Corporation; author H. Peter Anvin
*
* This file is part of the Linux kernel, and is made available under
* the terms of the GNU General Public License version 2.
static void enable_a20_bios(void)
{
- asm volatile("pushfl; int $0x15; popfl"
- : : "a" ((u16)0x2401));
+ struct biosregs ireg;
+
+ initregs(&ireg);
+ ireg.ax = 0x2401;
+ intcall(0x15, &ireg, NULL);
}
static void enable_a20_kbc(void)
*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright 2007 rPath, Inc. - All Rights Reserved
+ * Copyright 2009 Intel Corporation; author H. Peter Anvin
*
* Original APM BIOS checking by Stephen Rothwell, May 1994
* (sfr@canb.auug.org.au)
int query_apm_bios(void)
{
- u16 ax, bx, cx, dx, di;
- u32 ebx, esi;
- u8 err;
+ struct biosregs ireg, oreg;
/* APM BIOS installation check */
- ax = 0x5300;
- bx = cx = 0;
- asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp ; setc %0"
- : "=d" (err), "+a" (ax), "+b" (bx), "+c" (cx)
- : : "esi", "edi");
+ initregs(&ireg);
+ ireg.ah = 0x53;
+ intcall(0x15, &ireg, &oreg);
- if (err)
+ if (oreg.flags & X86_EFLAGS_CF)
return -1; /* No APM BIOS */
- if (bx != 0x504d) /* "PM" signature */
+ if (oreg.bx != 0x504d) /* "PM" signature */
return -1;
- if (!(cx & 0x02)) /* 32 bits supported? */
+ if (!(oreg.cx & 0x02)) /* 32 bits supported? */
return -1;
/* Disconnect first, just in case */
- ax = 0x5304;
- bx = 0;
- asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp"
- : "+a" (ax), "+b" (bx)
- : : "ecx", "edx", "esi", "edi");
-
- /* Paranoia */
- ebx = esi = 0;
- cx = dx = di = 0;
+ ireg.al = 0x04;
+ intcall(0x15, &ireg, NULL);
/* 32-bit connect */
- asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp ; setc %6"
- : "=a" (ax), "+b" (ebx), "+c" (cx), "+d" (dx),
- "+S" (esi), "+D" (di), "=m" (err)
- : "a" (0x5303));
-
- boot_params.apm_bios_info.cseg = ax;
- boot_params.apm_bios_info.offset = ebx;
- boot_params.apm_bios_info.cseg_16 = cx;
- boot_params.apm_bios_info.dseg = dx;
- boot_params.apm_bios_info.cseg_len = (u16)esi;
- boot_params.apm_bios_info.cseg_16_len = esi >> 16;
- boot_params.apm_bios_info.dseg_len = di;
-
- if (err)
+ ireg.al = 0x03;
+ intcall(0x15, &ireg, &oreg);
+
+ boot_params.apm_bios_info.cseg = oreg.ax;
+ boot_params.apm_bios_info.offset = oreg.ebx;
+ boot_params.apm_bios_info.cseg_16 = oreg.cx;
+ boot_params.apm_bios_info.dseg = oreg.dx;
+ boot_params.apm_bios_info.cseg_len = oreg.si;
+ boot_params.apm_bios_info.cseg_16_len = oreg.hsi;
+ boot_params.apm_bios_info.dseg_len = oreg.di;
+
+ if (oreg.flags & X86_EFLAGS_CF)
return -1;
/* Redo the installation check as the 32-bit connect;
some BIOSes return different flags this way... */
- ax = 0x5300;
- bx = cx = 0;
- asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp ; setc %0"
- : "=d" (err), "+a" (ax), "+b" (bx), "+c" (cx)
- : : "esi", "edi");
+ ireg.al = 0x00;
+ intcall(0x15, &ireg, &oreg);
- if (err || bx != 0x504d) {
+ if ((oreg.eflags & X86_EFLAGS_CF) || oreg.bx != 0x504d) {
/* Failure with 32-bit connect, try to disconect and ignore */
- ax = 0x5304;
- bx = 0;
- asm volatile("pushl %%ebp ; int $0x15 ; popl %%ebp"
- : "+a" (ax), "+b" (bx)
- : : "ecx", "edx", "esi", "edi");
+ ireg.al = 0x04;
+ intcall(0x15, &ireg, NULL);
return -1;
}
- boot_params.apm_bios_info.version = ax;
- boot_params.apm_bios_info.flags = cx;
+ boot_params.apm_bios_info.version = oreg.ax;
+ boot_params.apm_bios_info.flags = oreg.cx;
return 0;
}
--- /dev/null
+/* -----------------------------------------------------------------------
+ *
+ * Copyright 2009 Intel Corporation; author H. Peter Anvin
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2 or (at your
+ * option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * "Glove box" for BIOS calls. Avoids the constant problems with BIOSes
+ * touching registers they shouldn't be.
+ */
+
+ .code16
+ .text
+ .globl intcall
+ .type intcall, @function
+intcall:
+ /* Self-modify the INT instruction. Ugly, but works. */
+ cmpb %al, 3f
+ je 1f
+ movb %al, 3f
+ jmp 1f /* Synchronize pipeline */
+1:
+ /* Save state */
+ pushfl
+ pushw %fs
+ pushw %gs
+ pushal
+
+ /* Copy input state to stack frame */
+ subw $44, %sp
+ movw %dx, %si
+ movw %sp, %di
+ movw $11, %cx
+ rep; movsd
+
+ /* Pop full state from the stack */
+ popal
+ popw %gs
+ popw %fs
+ popw %es
+ popw %ds
+ popfl
+
+ /* Actual INT */
+ .byte 0xcd /* INT opcode */
+3: .byte 0
+
+ /* Push full state to the stack */
+ pushfl
+ pushw %ds
+ pushw %es
+ pushw %fs
+ pushw %gs
+ pushal
+
+ /* Re-establish C environment invariants */
+ cld
+ movzwl %sp, %esp
+ movw %cs, %ax
+ movw %ax, %ds
+ movw %ax, %es
+
+ /* Copy output state from stack frame */
+ movw 68(%esp), %di /* Original %cx == 3rd argument */
+ andw %di, %di
+ jz 4f
+ movw %sp, %si
+ movw $11, %cx
+ rep; movsd
+4: addw $44, %sp
+
+ /* Restore state and return */
+ popal
+ popw %gs
+ popw %fs
+ popfl
+ retl
+ .size intcall, .-intcall
*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright 2007 rPath, Inc. - All Rights Reserved
+ * Copyright 2009 Intel Corporation; author H. Peter Anvin
*
* This file is part of the Linux kernel, and is made available under
* the terms of the GNU General Public License version 2.
#include <asm/setup.h>
#include "bitops.h"
#include <asm/cpufeature.h>
+#include <asm/processor-flags.h>
/* Useful macros */
#define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)]))
/* apm.c */
int query_apm_bios(void);
+/* bioscall.c */
+struct biosregs {
+ union {
+ struct {
+ u32 edi;
+ u32 esi;
+ u32 ebp;
+ u32 _esp;
+ u32 ebx;
+ u32 edx;
+ u32 ecx;
+ u32 eax;
+ u32 _fsgs;
+ u32 _dses;
+ u32 eflags;
+ };
+ struct {
+ u16 di, hdi;
+ u16 si, hsi;
+ u16 bp, hbp;
+ u16 _sp, _hsp;
+ u16 bx, hbx;
+ u16 dx, hdx;
+ u16 cx, hcx;
+ u16 ax, hax;
+ u16 gs, fs;
+ u16 es, ds;
+ u16 flags, hflags;
+ };
+ struct {
+ u8 dil, dih, edi2, edi3;
+ u8 sil, sih, esi2, esi3;
+ u8 bpl, bph, ebp2, ebp3;
+ u8 _spl, _sph, _esp2, _esp3;
+ u8 bl, bh, ebx2, ebx3;
+ u8 dl, dh, edx2, edx3;
+ u8 cl, ch, ecx2, ecx3;
+ u8 al, ah, eax2, eax3;
+ };
+ };
+};
+void intcall(u8 int_no, const struct biosregs *ireg, struct biosregs *oreg);
+
/* cmdline.c */
int cmdline_find_option(const char *option, char *buffer, int bufsize);
int cmdline_find_option_bool(const char *option);
int vsprintf(char *buf, const char *fmt, va_list args);
int printf(const char *fmt, ...);
+/* regs.c */
+void initregs(struct biosregs *regs);
+
/* string.c */
int strcmp(const char *str1, const char *str2);
size_t strnlen(const char *s, size_t maxlen);
relocs
vmlinux.bin.all
vmlinux.relocs
+vmlinux.lds
+mkpiggy
+piggy.S
LDFLAGS := -m elf_$(UTS_MACHINE)
LDFLAGS_vmlinux := -T
-$(obj)/vmlinux: $(src)/vmlinux_$(BITS).lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/piggy.o FORCE
+hostprogs-y := mkpiggy
+
+$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/head_$(BITS).o $(obj)/misc.o $(obj)/piggy.o FORCE
$(call if_changed,ld)
@:
targets += vmlinux.bin.all vmlinux.relocs relocs
-hostprogs-$(CONFIG_X86_32) += relocs
+hostprogs-$(CONFIG_X86_NEED_RELOCS) += relocs
quiet_cmd_relocs = RELOCS $@
cmd_relocs = $(obj)/relocs $< > $@;$(obj)/relocs --abs-relocs $<
$(call if_changed,relocs)
vmlinux.bin.all-y := $(obj)/vmlinux.bin
-vmlinux.bin.all-$(CONFIG_RELOCATABLE) += $(obj)/vmlinux.relocs
-quiet_cmd_relocbin = BUILD $@
- cmd_relocbin = cat $(filter-out FORCE,$^) > $@
-$(obj)/vmlinux.bin.all: $(vmlinux.bin.all-y) FORCE
- $(call if_changed,relocbin)
-
-ifeq ($(CONFIG_X86_32),y)
+vmlinux.bin.all-$(CONFIG_X86_NEED_RELOCS) += $(obj)/vmlinux.relocs
-ifdef CONFIG_RELOCATABLE
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin.all FORCE
- $(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin.all FORCE
- $(call if_changed,bzip2)
-$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin.all FORCE
- $(call if_changed,lzma)
-else
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
+$(obj)/vmlinux.bin.gz: $(vmlinux.bin.all-y) FORCE
$(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
+$(obj)/vmlinux.bin.bz2: $(vmlinux.bin.all-y) FORCE
$(call if_changed,bzip2)
-$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
+$(obj)/vmlinux.bin.lzma: $(vmlinux.bin.all-y) FORCE
$(call if_changed,lzma)
-endif
-LDFLAGS_piggy.o := -r --format binary --oformat elf32-i386 -T
-else
+suffix-$(CONFIG_KERNEL_GZIP) := gz
+suffix-$(CONFIG_KERNEL_BZIP2) := bz2
+suffix-$(CONFIG_KERNEL_LZMA) := lzma
-$(obj)/vmlinux.bin.gz: $(obj)/vmlinux.bin FORCE
- $(call if_changed,gzip)
-$(obj)/vmlinux.bin.bz2: $(obj)/vmlinux.bin FORCE
- $(call if_changed,bzip2)
-$(obj)/vmlinux.bin.lzma: $(obj)/vmlinux.bin FORCE
- $(call if_changed,lzma)
-
-LDFLAGS_piggy.o := -r --format binary --oformat elf64-x86-64 -T
-endif
+quiet_cmd_mkpiggy = MKPIGGY $@
+ cmd_mkpiggy = $(obj)/mkpiggy $< > $@ || ( rm -f $@ ; false )
-suffix_$(CONFIG_KERNEL_GZIP) = gz
-suffix_$(CONFIG_KERNEL_BZIP2) = bz2
-suffix_$(CONFIG_KERNEL_LZMA) = lzma
-
-$(obj)/piggy.o: $(obj)/vmlinux.scr $(obj)/vmlinux.bin.$(suffix_y) FORCE
- $(call if_changed,ld)
+targets += piggy.S
+$(obj)/piggy.S: $(obj)/vmlinux.bin.$(suffix-y) $(obj)/mkpiggy FORCE
+ $(call if_changed,mkpiggy)
* the page directory. [According to comments etc elsewhere on a compressed
* kernel it will end up at 0x1000 + 1Mb I hope so as I assume this. - AC]
*
- * Page 0 is deliberately kept safe, since System Management Mode code in
+ * Page 0 is deliberately kept safe, since System Management Mode code in
* laptops may need to access the BIOS data stored there. This is also
- * useful for future device drivers that either access the BIOS via VM86
+ * useful for future device drivers that either access the BIOS via VM86
* mode.
*/
/*
* High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
*/
-.text
+ .text
#include <linux/linkage.h>
#include <asm/segment.h>
#include <asm/boot.h>
#include <asm/asm-offsets.h>
-.section ".text.head","ax",@progbits
+ .section ".text.head","ax",@progbits
ENTRY(startup_32)
cld
- /* test KEEP_SEGMENTS flag to see if the bootloader is asking
- * us to not reload segments */
- testb $(1<<6), BP_loadflags(%esi)
- jnz 1f
+ /*
+ * Test KEEP_SEGMENTS flag to see if the bootloader is asking
+ * us to not reload segments
+ */
+ testb $(1<<6), BP_loadflags(%esi)
+ jnz 1f
cli
- movl $(__BOOT_DS),%eax
- movl %eax,%ds
- movl %eax,%es
- movl %eax,%fs
- movl %eax,%gs
- movl %eax,%ss
+ movl $__BOOT_DS, %eax
+ movl %eax, %ds
+ movl %eax, %es
+ movl %eax, %fs
+ movl %eax, %gs
+ movl %eax, %ss
1:
-/* Calculate the delta between where we were compiled to run
+/*
+ * Calculate the delta between where we were compiled to run
* at and where we were actually loaded at. This can only be done
* with a short local call on x86. Nothing else will tell us what
* address we are running at. The reserved chunk of the real-mode
* data at 0x1e4 (defined as a scratch field) are used as the stack
* for this calculation. Only 4 bytes are needed.
*/
- leal (0x1e4+4)(%esi), %esp
- call 1f
-1: popl %ebp
- subl $1b, %ebp
+ leal (BP_scratch+4)(%esi), %esp
+ call 1f
+1: popl %ebp
+ subl $1b, %ebp
-/* %ebp contains the address we are loaded at by the boot loader and %ebx
+/*
+ * %ebp contains the address we are loaded at by the boot loader and %ebx
* contains the address where we should move the kernel image temporarily
* for safe in-place decompression.
*/
#ifdef CONFIG_RELOCATABLE
- movl %ebp, %ebx
- addl $(CONFIG_PHYSICAL_ALIGN - 1), %ebx
- andl $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebx
+ movl %ebp, %ebx
+ movl BP_kernel_alignment(%esi), %eax
+ decl %eax
+ addl %eax, %ebx
+ notl %eax
+ andl %eax, %ebx
#else
- movl $LOAD_PHYSICAL_ADDR, %ebx
+ movl $LOAD_PHYSICAL_ADDR, %ebx
#endif
- /* Replace the compressed data size with the uncompressed size */
- subl input_len(%ebp), %ebx
- movl output_len(%ebp), %eax
- addl %eax, %ebx
- /* Add 8 bytes for every 32K input block */
- shrl $12, %eax
- addl %eax, %ebx
- /* Add 32K + 18 bytes of extra slack */
- addl $(32768 + 18), %ebx
- /* Align on a 4K boundary */
- addl $4095, %ebx
- andl $~4095, %ebx
-
-/* Copy the compressed kernel to the end of our buffer
+ /* Target address to relocate to for decompression */
+ addl $z_extract_offset, %ebx
+
+ /* Set up the stack */
+ leal boot_stack_end(%ebx), %esp
+
+ /* Zero EFLAGS */
+ pushl $0
+ popfl
+
+/*
+ * Copy the compressed kernel to the end of our buffer
* where decompression in place becomes safe.
*/
- pushl %esi
- leal _end(%ebp), %esi
- leal _end(%ebx), %edi
- movl $(_end - startup_32), %ecx
+ pushl %esi
+ leal (_bss-4)(%ebp), %esi
+ leal (_bss-4)(%ebx), %edi
+ movl $(_bss - startup_32), %ecx
+ shrl $2, %ecx
std
- rep
- movsb
+ rep movsl
cld
- popl %esi
-
-/* Compute the kernel start address.
- */
-#ifdef CONFIG_RELOCATABLE
- addl $(CONFIG_PHYSICAL_ALIGN - 1), %ebp
- andl $(~(CONFIG_PHYSICAL_ALIGN - 1)), %ebp
-#else
- movl $LOAD_PHYSICAL_ADDR, %ebp
-#endif
+ popl %esi
/*
* Jump to the relocated address.
*/
- leal relocated(%ebx), %eax
- jmp *%eax
+ leal relocated(%ebx), %eax
+ jmp *%eax
ENDPROC(startup_32)
-.section ".text"
+ .text
relocated:
/*
- * Clear BSS
- */
- xorl %eax,%eax
- leal _edata(%ebx),%edi
- leal _end(%ebx), %ecx
- subl %edi,%ecx
- cld
- rep
- stosb
-
-/*
- * Setup the stack for the decompressor
+ * Clear BSS (stack is currently empty)
*/
- leal boot_stack_end(%ebx), %esp
+ xorl %eax, %eax
+ leal _bss(%ebx), %edi
+ leal _ebss(%ebx), %ecx
+ subl %edi, %ecx
+ shrl $2, %ecx
+ rep stosl
/*
* Do the decompression, and jump to the new kernel..
*/
- movl output_len(%ebx), %eax
- pushl %eax
- # push arguments for decompress_kernel:
- pushl %ebp # output address
- movl input_len(%ebx), %eax
- pushl %eax # input_len
- leal input_data(%ebx), %eax
- pushl %eax # input_data
- leal boot_heap(%ebx), %eax
- pushl %eax # heap area
- pushl %esi # real mode pointer
- call decompress_kernel
- addl $20, %esp
- popl %ecx
+ leal z_extract_offset_negative(%ebx), %ebp
+ /* push arguments for decompress_kernel: */
+ pushl %ebp /* output address */
+ pushl $z_input_len /* input_len */
+ leal input_data(%ebx), %eax
+ pushl %eax /* input_data */
+ leal boot_heap(%ebx), %eax
+ pushl %eax /* heap area */
+ pushl %esi /* real mode pointer */
+ call decompress_kernel
+ addl $20, %esp
#if CONFIG_RELOCATABLE
-/* Find the address of the relocations.
+/*
+ * Find the address of the relocations.
*/
- movl %ebp, %edi
- addl %ecx, %edi
+ leal z_output_len(%ebp), %edi
-/* Calculate the delta between where vmlinux was compiled to run
+/*
+ * Calculate the delta between where vmlinux was compiled to run
* and where it was actually loaded.
*/
- movl %ebp, %ebx
- subl $LOAD_PHYSICAL_ADDR, %ebx
- jz 2f /* Nothing to be done if loaded at compiled addr. */
+ movl %ebp, %ebx
+ subl $LOAD_PHYSICAL_ADDR, %ebx
+ jz 2f /* Nothing to be done if loaded at compiled addr. */
/*
* Process relocations.
*/
-1: subl $4, %edi
- movl 0(%edi), %ecx
- testl %ecx, %ecx
- jz 2f
- addl %ebx, -__PAGE_OFFSET(%ebx, %ecx)
- jmp 1b
+1: subl $4, %edi
+ movl (%edi), %ecx
+ testl %ecx, %ecx
+ jz 2f
+ addl %ebx, -__PAGE_OFFSET(%ebx, %ecx)
+ jmp 1b
2:
#endif
/*
* Jump to the decompressed kernel.
*/
- xorl %ebx,%ebx
- jmp *%ebp
+ xorl %ebx, %ebx
+ jmp *%ebp
-.bss
-/* Stack and heap for uncompression */
-.balign 4
+/*
+ * Stack and heap for uncompression
+ */
+ .bss
+ .balign 4
boot_heap:
.fill BOOT_HEAP_SIZE, 1, 0
boot_stack:
/*
* High loaded stuff by Hans Lermen & Werner Almesberger, Feb. 1996
*/
-.code32
-.text
+ .code32
+ .text
#include <linux/linkage.h>
#include <asm/segment.h>
#include <asm/processor-flags.h>
#include <asm/asm-offsets.h>
-.section ".text.head"
+ .section ".text.head"
.code32
ENTRY(startup_32)
cld
- /* test KEEP_SEGMENTS flag to see if the bootloader is asking
- * us to not reload segments */
+ /*
+ * Test KEEP_SEGMENTS flag to see if the bootloader is asking
+ * us to not reload segments
+ */
testb $(1<<6), BP_loadflags(%esi)
jnz 1f
movl %eax, %ss
1:
-/* Calculate the delta between where we were compiled to run
+/*
+ * Calculate the delta between where we were compiled to run
* at and where we were actually loaded at. This can only be done
* with a short local call on x86. Nothing else will tell us what
* address we are running at. The reserved chunk of the real-mode
* data at 0x1e4 (defined as a scratch field) are used as the stack
* for this calculation. Only 4 bytes are needed.
*/
- leal (0x1e4+4)(%esi), %esp
+ leal (BP_scratch+4)(%esi), %esp
call 1f
1: popl %ebp
subl $1b, %ebp
testl %eax, %eax
jnz no_longmode
-/* Compute the delta between where we were compiled to run at
+/*
+ * Compute the delta between where we were compiled to run at
* and where the code will actually run at.
- */
-/* %ebp contains the address we are loaded at by the boot loader and %ebx
+ *
+ * %ebp contains the address we are loaded at by the boot loader and %ebx
* contains the address where we should move the kernel image temporarily
* for safe in-place decompression.
*/
#ifdef CONFIG_RELOCATABLE
movl %ebp, %ebx
- addl $(PMD_PAGE_SIZE -1), %ebx
- andl $PMD_PAGE_MASK, %ebx
+ movl BP_kernel_alignment(%esi), %eax
+ decl %eax
+ addl %eax, %ebx
+ notl %eax
+ andl %eax, %ebx
#else
- movl $CONFIG_PHYSICAL_START, %ebx
+ movl $LOAD_PHYSICAL_ADDR, %ebx
#endif
- /* Replace the compressed data size with the uncompressed size */
- subl input_len(%ebp), %ebx
- movl output_len(%ebp), %eax
- addl %eax, %ebx
- /* Add 8 bytes for every 32K input block */
- shrl $12, %eax
- addl %eax, %ebx
- /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
- addl $(32768 + 18 + 4095), %ebx
- andl $~4095, %ebx
+ /* Target address to relocate to for decompression */
+ addl $z_extract_offset, %ebx
/*
* Prepare for entering 64 bit mode
/*
* Build early 4G boot pagetable
*/
- /* Initialize Page tables to 0*/
+ /* Initialize Page tables to 0 */
leal pgtable(%ebx), %edi
xorl %eax, %eax
movl $((4096*6)/4), %ecx
btsl $_EFER_LME, %eax
wrmsr
- /* Setup for the jump to 64bit mode
+ /*
+ * Setup for the jump to 64bit mode
*
* When the jump is performend we will be in long mode but
* in 32bit compatibility mode with EFER.LME = 1, CS.L = 0, CS.D = 1
#include "../../kernel/verify_cpu_64.S"
- /* Be careful here startup_64 needs to be at a predictable
+ /*
+ * Be careful here startup_64 needs to be at a predictable
* address so I can export it in an ELF header. Bootloaders
* should look at the ELF header to find this address, as
* it may change in the future.
.code64
.org 0x200
ENTRY(startup_64)
- /* We come here either from startup_32 or directly from a
+ /*
+ * We come here either from startup_32 or directly from a
* 64bit bootloader. If we come here from a bootloader we depend on
* an identity mapped page table being provied that maps our
* entire text+data+bss and hopefully all of memory.
movl $0x20, %eax
ltr %ax
- /* Compute the decompressed kernel start address. It is where
+ /*
+ * Compute the decompressed kernel start address. It is where
* we were loaded at aligned to a 2M boundary. %rbp contains the
* decompressed kernel start address.
*
* If it is a relocatable kernel then decompress and run the kernel
* from load address aligned to 2MB addr, otherwise decompress and
- * run the kernel from CONFIG_PHYSICAL_START
+ * run the kernel from LOAD_PHYSICAL_ADDR
+ *
+ * We cannot rely on the calculation done in 32-bit mode, since we
+ * may have been invoked via the 64-bit entry point.
*/
/* Start with the delta to where the kernel will run at. */
#ifdef CONFIG_RELOCATABLE
leaq startup_32(%rip) /* - $startup_32 */, %rbp
- addq $(PMD_PAGE_SIZE - 1), %rbp
- andq $PMD_PAGE_MASK, %rbp
- movq %rbp, %rbx
+ movl BP_kernel_alignment(%rsi), %eax
+ decl %eax
+ addq %rax, %rbp
+ notq %rax
+ andq %rax, %rbp
#else
- movq $CONFIG_PHYSICAL_START, %rbp
- movq %rbp, %rbx
+ movq $LOAD_PHYSICAL_ADDR, %rbp
#endif
- /* Replace the compressed data size with the uncompressed size */
- movl input_len(%rip), %eax
- subq %rax, %rbx
- movl output_len(%rip), %eax
- addq %rax, %rbx
- /* Add 8 bytes for every 32K input block */
- shrq $12, %rax
- addq %rax, %rbx
- /* Add 32K + 18 bytes of extra slack and align on a 4K boundary */
- addq $(32768 + 18 + 4095), %rbx
- andq $~4095, %rbx
-
-/* Copy the compressed kernel to the end of our buffer
+ /* Target address to relocate to for decompression */
+ leaq z_extract_offset(%rbp), %rbx
+
+ /* Set up the stack */
+ leaq boot_stack_end(%rbx), %rsp
+
+ /* Zero EFLAGS */
+ pushq $0
+ popfq
+
+/*
+ * Copy the compressed kernel to the end of our buffer
* where decompression in place becomes safe.
*/
- leaq _end_before_pgt(%rip), %r8
- leaq _end_before_pgt(%rbx), %r9
- movq $_end_before_pgt /* - $startup_32 */, %rcx
-1: subq $8, %r8
- subq $8, %r9
- movq 0(%r8), %rax
- movq %rax, 0(%r9)
- subq $8, %rcx
- jnz 1b
+ pushq %rsi
+ leaq (_bss-8)(%rip), %rsi
+ leaq (_bss-8)(%rbx), %rdi
+ movq $_bss /* - $startup_32 */, %rcx
+ shrq $3, %rcx
+ std
+ rep movsq
+ cld
+ popq %rsi
/*
* Jump to the relocated address.
leaq relocated(%rbx), %rax
jmp *%rax
-.section ".text"
+ .text
relocated:
/*
- * Clear BSS
+ * Clear BSS (stack is currently empty)
*/
- xorq %rax, %rax
- leaq _edata(%rbx), %rdi
- leaq _end_before_pgt(%rbx), %rcx
+ xorl %eax, %eax
+ leaq _bss(%rip), %rdi
+ leaq _ebss(%rip), %rcx
subq %rdi, %rcx
- cld
- rep
- stosb
-
- /* Setup the stack */
- leaq boot_stack_end(%rip), %rsp
-
- /* zero EFLAGS after setting rsp */
- pushq $0
- popfq
+ shrq $3, %rcx
+ rep stosq
/*
* Do the decompression, and jump to the new kernel..
*/
- pushq %rsi # Save the real mode argument
- movq %rsi, %rdi # real mode address
- leaq boot_heap(%rip), %rsi # malloc area for uncompression
- leaq input_data(%rip), %rdx # input_data
- movl input_len(%rip), %eax
- movq %rax, %rcx # input_len
- movq %rbp, %r8 # output
+ pushq %rsi /* Save the real mode argument */
+ movq %rsi, %rdi /* real mode address */
+ leaq boot_heap(%rip), %rsi /* malloc area for uncompression */
+ leaq input_data(%rip), %rdx /* input_data */
+ movl $z_input_len, %ecx /* input_len */
+ movq %rbp, %r8 /* output target address */
call decompress_kernel
popq %rsi
.quad 0x0000000000000000 /* TS continued */
gdt_end:
-.bss
-/* Stack and heap for uncompression */
-.balign 4
+/*
+ * Stack and heap for uncompression
+ */
+ .bss
+ .balign 4
boot_heap:
.fill BOOT_HEAP_SIZE, 1, 0
boot_stack:
.fill BOOT_STACK_SIZE, 1, 0
boot_stack_end:
+
+/*
+ * Space for page tables (not in .bss so not zeroed)
+ */
+ .section ".pgtable","a",@nobits
+ .balign 4096
+pgtable:
+ .fill 6*4096, 1, 0
free_mem_ptr = heap; /* Heap */
free_mem_end_ptr = heap + BOOT_HEAP_SIZE;
+ if ((unsigned long)output & (MIN_KERNEL_ALIGN - 1))
+ error("Destination address inappropriately aligned");
#ifdef CONFIG_X86_64
- if ((unsigned long)output & (__KERNEL_ALIGN - 1))
- error("Destination address not 2M aligned");
- if ((unsigned long)output >= 0xffffffffffUL)
+ if (heap > 0x3fffffffffffUL)
error("Destination address too large");
#else
- if ((u32)output & (CONFIG_PHYSICAL_ALIGN - 1))
- error("Destination address not CONFIG_PHYSICAL_ALIGN aligned");
if (heap > ((-__PAGE_OFFSET-(512<<20)-1) & 0x7fffffff))
error("Destination address too large");
+#endif
#ifndef CONFIG_RELOCATABLE
- if ((u32)output != LOAD_PHYSICAL_ADDR)
+ if ((unsigned long)output != LOAD_PHYSICAL_ADDR)
error("Wrong destination address");
-#endif
#endif
if (!quiet)
--- /dev/null
+/* ----------------------------------------------------------------------- *
+ *
+ * Copyright (C) 2009 Intel Corporation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
+ * 02110-1301, USA.
+ *
+ * H. Peter Anvin <hpa@linux.intel.com>
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * Compute the desired load offset from a compressed program; outputs
+ * a small assembly wrapper with the appropriate symbols defined.
+ */
+
+#include <stdlib.h>
+#include <stdio.h>
+#include <string.h>
+#include <inttypes.h>
+
+static uint32_t getle32(const void *p)
+{
+ const uint8_t *cp = p;
+
+ return (uint32_t)cp[0] + ((uint32_t)cp[1] << 8) +
+ ((uint32_t)cp[2] << 16) + ((uint32_t)cp[3] << 24);
+}
+
+int main(int argc, char *argv[])
+{
+ uint32_t olen;
+ long ilen;
+ unsigned long offs;
+ FILE *f;
+
+ if (argc < 2) {
+ fprintf(stderr, "Usage: %s compressed_file\n", argv[0]);
+ return 1;
+ }
+
+ /* Get the information for the compressed kernel image first */
+
+ f = fopen(argv[1], "r");
+ if (!f) {
+ perror(argv[1]);
+ return 1;
+ }
+
+
+ if (fseek(f, -4L, SEEK_END)) {
+ perror(argv[1]);
+ }
+ fread(&olen, sizeof olen, 1, f);
+ ilen = ftell(f);
+ olen = getle32(&olen);
+ fclose(f);
+
+ /*
+ * Now we have the input (compressed) and output (uncompressed)
+ * sizes, compute the necessary decompression offset...
+ */
+
+ offs = (olen > ilen) ? olen - ilen : 0;
+ offs += olen >> 12; /* Add 8 bytes for each 32K block */
+ offs += 32*1024 + 18; /* Add 32K + 18 bytes slack */
+ offs = (offs+4095) & ~4095; /* Round to a 4K boundary */
+
+ printf(".section \".rodata.compressed\",\"a\",@progbits\n");
+ printf(".globl z_input_len\n");
+ printf("z_input_len = %lu\n", ilen);
+ printf(".globl z_output_len\n");
+ printf("z_output_len = %lu\n", (unsigned long)olen);
+ printf(".globl z_extract_offset\n");
+ printf("z_extract_offset = 0x%lx\n", offs);
+ /* z_extract_offset_negative allows simplification of head_32.S */
+ printf(".globl z_extract_offset_negative\n");
+ printf("z_extract_offset_negative = -0x%lx\n", offs);
+
+ printf(".globl input_data, input_data_end\n");
+ printf("input_data:\n");
+ printf(".incbin \"%s\"\n", argv[1]);
+ printf("input_data_end:\n");
+
+ return 0;
+}
--- /dev/null
+OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT)
+
+#undef i386
+
+#include <asm/page_types.h>
+
+#ifdef CONFIG_X86_64
+OUTPUT_ARCH(i386:x86-64)
+ENTRY(startup_64)
+#else
+OUTPUT_ARCH(i386)
+ENTRY(startup_32)
+#endif
+
+SECTIONS
+{
+ /* Be careful parts of head_64.S assume startup_32 is at
+ * address 0.
+ */
+ . = 0;
+ .text.head : {
+ _head = . ;
+ *(.text.head)
+ _ehead = . ;
+ }
+ .rodata.compressed : {
+ *(.rodata.compressed)
+ }
+ .text : {
+ _text = .; /* Text */
+ *(.text)
+ *(.text.*)
+ _etext = . ;
+ }
+ .rodata : {
+ _rodata = . ;
+ *(.rodata) /* read-only data */
+ *(.rodata.*)
+ _erodata = . ;
+ }
+ .data : {
+ _data = . ;
+ *(.data)
+ *(.data.*)
+ _edata = . ;
+ }
+ . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+ .bss : {
+ _bss = . ;
+ *(.bss)
+ *(.bss.*)
+ *(COMMON)
+ . = ALIGN(8); /* For convenience during zeroing */
+ _ebss = .;
+ }
+#ifdef CONFIG_X86_64
+ . = ALIGN(PAGE_SIZE);
+ .pgtable : {
+ _pgtable = . ;
+ *(.pgtable)
+ _epgtable = . ;
+ }
+#endif
+ _end = .;
+}
+++ /dev/null
-SECTIONS
-{
- .rodata.compressed : {
- input_len = .;
- LONG(input_data_end - input_data) input_data = .;
- *(.data)
- output_len = . - 4;
- input_data_end = .;
- }
-}
+++ /dev/null
-OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
-OUTPUT_ARCH(i386)
-ENTRY(startup_32)
-SECTIONS
-{
- /* Be careful parts of head_32.S assume startup_32 is at
- * address 0.
- */
- . = 0;
- .text.head : {
- _head = . ;
- *(.text.head)
- _ehead = . ;
- }
- .rodata.compressed : {
- *(.rodata.compressed)
- }
- .text : {
- _text = .; /* Text */
- *(.text)
- *(.text.*)
- _etext = . ;
- }
- .rodata : {
- _rodata = . ;
- *(.rodata) /* read-only data */
- *(.rodata.*)
- _erodata = . ;
- }
- .data : {
- _data = . ;
- *(.data)
- *(.data.*)
- _edata = . ;
- }
- .bss : {
- _bss = . ;
- *(.bss)
- *(.bss.*)
- *(COMMON)
- _end = . ;
- }
-}
+++ /dev/null
-OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64")
-OUTPUT_ARCH(i386:x86-64)
-ENTRY(startup_64)
-SECTIONS
-{
- /* Be careful parts of head_64.S assume startup_32 is at
- * address 0.
- */
- . = 0;
- .text.head : {
- _head = . ;
- *(.text.head)
- _ehead = . ;
- }
- .rodata.compressed : {
- *(.rodata.compressed)
- }
- .text : {
- _text = .; /* Text */
- *(.text)
- *(.text.*)
- _etext = . ;
- }
- .rodata : {
- _rodata = . ;
- *(.rodata) /* read-only data */
- *(.rodata.*)
- _erodata = . ;
- }
- .data : {
- _data = . ;
- *(.data)
- *(.data.*)
- _edata = . ;
- }
- .bss : {
- _bss = . ;
- *(.bss)
- *(.bss.*)
- *(COMMON)
- . = ALIGN(8);
- _end_before_pgt = . ;
- . = ALIGN(4096);
- pgtable = . ;
- . = . + 4096 * 6;
- _ebss = .;
- }
-}
*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright 2007 rPath, Inc. - All Rights Reserved
+ * Copyright 2009 Intel Corporation; author H. Peter Anvin
*
* This file is part of the Linux kernel, and is made available under
* the terms of the GNU General Public License version 2.
*/
static int read_mbr(u8 devno, void *buf)
{
- u16 ax, bx, cx, dx;
+ struct biosregs ireg, oreg;
- ax = 0x0201; /* Legacy Read, one sector */
- cx = 0x0001; /* Sector 0-0-1 */
- dx = devno;
- bx = (size_t)buf;
- asm volatile("pushfl; stc; int $0x13; setc %%al; popfl"
- : "+a" (ax), "+c" (cx), "+d" (dx), "+b" (bx)
- : : "esi", "edi", "memory");
+ initregs(&ireg);
+ ireg.ax = 0x0201; /* Legacy Read, one sector */
+ ireg.cx = 0x0001; /* Sector 0-0-1 */
+ ireg.dl = devno;
+ ireg.bx = (size_t)buf;
- return -(u8)ax; /* 0 or -1 */
+ intcall(0x13, &ireg, &oreg);
+
+ return -(oreg.eflags & X86_EFLAGS_CF); /* 0 or -1 */
}
static u32 read_mbr_sig(u8 devno, struct edd_info *ei, u32 *mbrsig)
static int get_edd_info(u8 devno, struct edd_info *ei)
{
- u16 ax, bx, cx, dx, di;
+ struct biosregs ireg, oreg;
memset(ei, 0, sizeof *ei);
/* Check Extensions Present */
- ax = 0x4100;
- bx = EDDMAGIC1;
- dx = devno;
- asm("pushfl; stc; int $0x13; setc %%al; popfl"
- : "+a" (ax), "+b" (bx), "=c" (cx), "+d" (dx)
- : : "esi", "edi");
+ initregs(&ireg);
+ ireg.ah = 0x41;
+ ireg.bx = EDDMAGIC1;
+ ireg.dl = devno;
+ intcall(0x13, &ireg, &oreg);
- if ((u8)ax)
+ if (oreg.eflags & X86_EFLAGS_CF)
return -1; /* No extended information */
- if (bx != EDDMAGIC2)
+ if (oreg.bx != EDDMAGIC2)
return -1;
ei->device = devno;
- ei->version = ax >> 8; /* EDD version number */
- ei->interface_support = cx; /* EDD functionality subsets */
+ ei->version = oreg.ah; /* EDD version number */
+ ei->interface_support = oreg.cx; /* EDD functionality subsets */
/* Extended Get Device Parameters */
ei->params.length = sizeof(ei->params);
- ax = 0x4800;
- dx = devno;
- asm("pushfl; int $0x13; popfl"
- : "+a" (ax), "+d" (dx), "=m" (ei->params)
- : "S" (&ei->params)
- : "ebx", "ecx", "edi");
+ ireg.ah = 0x48;
+ ireg.si = (size_t)&ei->params;
+ intcall(0x13, &ireg, &oreg);
/* Get legacy CHS parameters */
/* Ralf Brown recommends setting ES:DI to 0:0 */
- ax = 0x0800;
- dx = devno;
- di = 0;
- asm("pushw %%es; "
- "movw %%di,%%es; "
- "pushfl; stc; int $0x13; setc %%al; popfl; "
- "popw %%es"
- : "+a" (ax), "=b" (bx), "=c" (cx), "+d" (dx), "+D" (di)
- : : "esi");
-
- if ((u8)ax == 0) {
- ei->legacy_max_cylinder = (cx >> 8) + ((cx & 0xc0) << 2);
- ei->legacy_max_head = dx >> 8;
- ei->legacy_sectors_per_track = cx & 0x3f;
+ ireg.ah = 0x08;
+ ireg.es = 0;
+ intcall(0x13, &ireg, &oreg);
+
+ if (!(oreg.eflags & X86_EFLAGS_CF)) {
+ ei->legacy_max_cylinder = oreg.ch + ((oreg.cl & 0xc0) << 2);
+ ei->legacy_max_head = oreg.dh;
+ ei->legacy_sectors_per_track = oreg.cl & 0x3f;
}
return 0;
#include <asm/page_types.h>
#include <asm/setup.h>
#include "boot.h"
-#include "offsets.h"
+#include "voffset.h"
+#include "zoffset.h"
BOOTSEG = 0x07C0 /* original address of boot-sector */
SYSSEG = 0x1000 /* historical load address >> 4 */
# Part 2 of the header, from the old setup.S
.ascii "HdrS" # header signature
- .word 0x0209 # header version number (>= 0x0105)
+ .word 0x020a # header version number (>= 0x0105)
# or else old loadlin-1.5 will fail)
.globl realmode_swtch
realmode_swtch: .word 0, 0 # default_switch, SETUPSEG
# end of setup code can be used by setup
# for local heap purposes.
-pad1: .word 0
+ext_loader_ver:
+ .byte 0 # Extended boot loader version
+ext_loader_type:
+ .byte 0 # Extended boot loader type
+
cmd_line_ptr: .long 0 # (Header version 0x0202 or later)
# If nonzero, a 32-bit pointer
# to the kernel command line.
#else
relocatable_kernel: .byte 0
#endif
-pad2: .byte 0
+min_alignment: .byte MIN_KERNEL_ALIGN_LG2 # minimum alignment
pad3: .word 0
cmdline_size: .long COMMAND_LINE_SIZE-1 #length of the command line,
hardware_subarch_data: .quad 0
-payload_offset: .long input_data
-payload_length: .long input_data_end-input_data
+payload_offset: .long ZO_input_data
+payload_length: .long ZO_z_input_len
setup_data: .quad 0 # 64-bit physical pointer to
# single linked list of
# struct setup_data
+pref_address: .quad LOAD_PHYSICAL_ADDR # preferred load addr
+
+#define ZO_INIT_SIZE (ZO__end - ZO_startup_32 + ZO_z_extract_offset)
+#define VO_INIT_SIZE (VO__end - VO__text)
+#if ZO_INIT_SIZE > VO_INIT_SIZE
+#define INIT_SIZE ZO_INIT_SIZE
+#else
+#define INIT_SIZE VO_INIT_SIZE
+#endif
+init_size: .long INIT_SIZE # kernel initialization size
+
# End of setup header #####################################################
- .section ".inittext", "ax"
+ .section ".entrytext", "ax"
start_of_setup:
#ifdef SAFE_RESET_DISK_CONTROLLER
# Reset the disk controller.
*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright 2007 rPath, Inc. - All Rights Reserved
+ * Copyright 2009 Intel Corporation; author H. Peter Anvin
*
* This file is part of the Linux kernel, and is made available under
* the terms of the GNU General Public License version 2.
*/
static void keyboard_set_repeat(void)
{
- u16 ax = 0x0305;
- u16 bx = 0;
- asm volatile("int $0x16"
- : "+a" (ax), "+b" (bx)
- : : "ecx", "edx", "esi", "edi");
+ struct biosregs ireg;
+ initregs(&ireg);
+ ireg.ax = 0x0305;
+ intcall(0x16, &ireg, NULL);
}
/*
*/
static void query_ist(void)
{
+ struct biosregs ireg, oreg;
+
/* Some older BIOSes apparently crash on this call, so filter
it from machines too old to have SpeedStep at all. */
if (cpu.level < 6)
return;
- asm("int $0x15"
- : "=a" (boot_params.ist_info.signature),
- "=b" (boot_params.ist_info.command),
- "=c" (boot_params.ist_info.event),
- "=d" (boot_params.ist_info.perf_level)
- : "a" (0x0000e980), /* IST Support */
- "d" (0x47534943)); /* Request value */
+ initregs(&ireg);
+ ireg.ax = 0xe980; /* IST Support */
+ ireg.edx = 0x47534943; /* Request value */
+ intcall(0x15, &ireg, &oreg);
+
+ boot_params.ist_info.signature = oreg.eax;
+ boot_params.ist_info.command = oreg.ebx;
+ boot_params.ist_info.event = oreg.ecx;
+ boot_params.ist_info.perf_level = oreg.edx;
}
/*
static void set_bios_mode(void)
{
#ifdef CONFIG_X86_64
- u32 eax, ebx;
+ struct biosregs ireg;
- eax = 0xec00;
- ebx = 2;
- asm volatile("int $0x15"
- : "+a" (eax), "+b" (ebx)
- : : "ecx", "edx", "esi", "edi");
+ initregs(&ireg);
+ ireg.ax = 0xec00;
+ ireg.bx = 2;
+ intcall(0x15, &ireg, NULL);
#endif
}
*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright 2007 rPath, Inc. - All Rights Reserved
+ * Copyright 2009 Intel Corporation; author H. Peter Anvin
*
* This file is part of the Linux kernel, and is made available under
* the terms of the GNU General Public License version 2.
int query_mca(void)
{
- u8 err;
- u16 es, bx, len;
-
- asm("pushw %%es ; "
- "int $0x15 ; "
- "setc %0 ; "
- "movw %%es, %1 ; "
- "popw %%es"
- : "=acd" (err), "=acdSD" (es), "=b" (bx)
- : "a" (0xc000));
-
- if (err)
+ struct biosregs ireg, oreg;
+ u16 len;
+
+ initregs(&ireg);
+ ireg.ah = 0xc0;
+ intcall(0x15, &ireg, &oreg);
+
+ if (oreg.eflags & X86_EFLAGS_CF)
return -1; /* No MCA present */
- set_fs(es);
- len = rdfs16(bx);
+ set_fs(oreg.es);
+ len = rdfs16(oreg.bx);
if (len > sizeof(boot_params.sys_desc_table))
len = sizeof(boot_params.sys_desc_table);
- copy_from_fs(&boot_params.sys_desc_table, bx, len);
+ copy_from_fs(&boot_params.sys_desc_table, oreg.bx, len);
return 0;
}
static int detect_memory_e820(void)
{
int count = 0;
- u32 next = 0;
- u32 size, id, edi;
- u8 err;
+ struct biosregs ireg, oreg;
struct e820entry *desc = boot_params.e820_map;
static struct e820entry buf; /* static so it is zeroed */
+ initregs(&ireg);
+ ireg.ax = 0xe820;
+ ireg.cx = sizeof buf;
+ ireg.edx = SMAP;
+ ireg.di = (size_t)&buf;
+
/*
* Note: at least one BIOS is known which assumes that the
* buffer pointed to by one e820 call is the same one as
*/
do {
- size = sizeof buf;
-
- /* Important: %edx and %esi are clobbered by some BIOSes,
- so they must be either used for the error output
- or explicitly marked clobbered. Given that, assume there
- is something out there clobbering %ebp and %edi, too. */
- asm("pushl %%ebp; int $0x15; popl %%ebp; setc %0"
- : "=d" (err), "+b" (next), "=a" (id), "+c" (size),
- "=D" (edi), "+m" (buf)
- : "D" (&buf), "d" (SMAP), "a" (0xe820)
- : "esi");
+ intcall(0x15, &ireg, &oreg);
+ ireg.ebx = oreg.ebx; /* for next iteration... */
/* BIOSes which terminate the chain with CF = 1 as opposed
to %ebx = 0 don't always report the SMAP signature on
the final, failing, probe. */
- if (err)
+ if (oreg.eflags & X86_EFLAGS_CF)
break;
/* Some BIOSes stop returning SMAP in the middle of
screwed up the map at that point, we might have a
partial map, the full map, or complete garbage, so
just return failure. */
- if (id != SMAP) {
+ if (oreg.eax != SMAP) {
count = 0;
break;
}
*desc++ = buf;
count++;
- } while (next && count < ARRAY_SIZE(boot_params.e820_map));
+ } while (ireg.ebx && count < ARRAY_SIZE(boot_params.e820_map));
return boot_params.e820_entries = count;
}
static int detect_memory_e801(void)
{
- u16 ax, bx, cx, dx;
- u8 err;
+ struct biosregs ireg, oreg;
- bx = cx = dx = 0;
- ax = 0xe801;
- asm("stc; int $0x15; setc %0"
- : "=m" (err), "+a" (ax), "+b" (bx), "+c" (cx), "+d" (dx));
+ initregs(&ireg);
+ ireg.ax = 0xe801;
+ intcall(0x15, &ireg, &oreg);
- if (err)
+ if (oreg.eflags & X86_EFLAGS_CF)
return -1;
/* Do we really need to do this? */
- if (cx || dx) {
- ax = cx;
- bx = dx;
+ if (oreg.cx || oreg.dx) {
+ oreg.ax = oreg.cx;
+ oreg.bx = oreg.dx;
}
- if (ax > 15*1024)
+ if (oreg.ax > 15*1024) {
return -1; /* Bogus! */
-
- /* This ignores memory above 16MB if we have a memory hole
- there. If someone actually finds a machine with a memory
- hole at 16MB and no support for 0E820h they should probably
- generate a fake e820 map. */
- boot_params.alt_mem_k = (ax == 15*1024) ? (dx << 6)+ax : ax;
+ } else if (oreg.ax == 15*1024) {
+ boot_params.alt_mem_k = (oreg.dx << 6) + oreg.ax;
+ } else {
+ /*
+ * This ignores memory above 16MB if we have a memory
+ * hole there. If someone actually finds a machine
+ * with a memory hole at 16MB and no support for
+ * 0E820h they should probably generate a fake e820
+ * map.
+ */
+ boot_params.alt_mem_k = oreg.ax;
+ }
return 0;
}
static int detect_memory_88(void)
{
- u16 ax;
- u8 err;
+ struct biosregs ireg, oreg;
- ax = 0x8800;
- asm("stc; int $0x15; setc %0" : "=bcdm" (err), "+a" (ax));
+ initregs(&ireg);
+ ireg.ah = 0x88;
+ intcall(0x15, &ireg, &oreg);
- boot_params.screen_info.ext_mem_k = ax;
+ boot_params.screen_info.ext_mem_k = oreg.ax;
- return -err;
+ return -(oreg.eflags & X86_EFLAGS_CF); /* 0 or -1 */
}
int detect_memory(void)
--- /dev/null
+/* -----------------------------------------------------------------------
+ *
+ * Copyright 2009 Intel Corporation; author H. Peter Anvin
+ *
+ * This file is part of the Linux kernel, and is made available under
+ * the terms of the GNU General Public License version 2 or (at your
+ * option) any later version; incorporated herein by reference.
+ *
+ * ----------------------------------------------------------------------- */
+
+/*
+ * Simple helper function for initializing a register set.
+ *
+ * Note that this sets EFLAGS_CF in the input register set; this
+ * makes it easier to catch functions which do nothing but don't
+ * explicitly set CF.
+ */
+
+#include "boot.h"
+
+void initregs(struct biosregs *reg)
+{
+ memset(reg, 0, sizeof *reg);
+ reg->eflags |= X86_EFLAGS_CF;
+ reg->ds = ds();
+ reg->es = ds();
+ reg->fs = fs();
+ reg->gs = gs();
+}
. = 497;
.header : { *(.header) }
+ .entrytext : { *(.entrytext) }
.inittext : { *(.inittext) }
.initdata : { *(.initdata) }
+ __end_init = .;
+
.text : { *(.text) }
.text32 : { *(.text32) }
. = ASSERT(_end <= 0x8000, "Setup too big!");
. = ASSERT(hdr == 0x1f1, "The setup header has the wrong offset!");
+ /* Necessary for the very-old-loader check to work... */
+ . = ASSERT(__end_init <= 5*512, "init sections too big!");
+
}
*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright 2007 rPath, Inc. - All Rights Reserved
+ * Copyright 2009 Intel Corporation; author H. Peter Anvin
*
* This file is part of the Linux kernel, and is made available under
* the terms of the GNU General Public License version 2.
void __attribute__((section(".inittext"))) putchar(int ch)
{
- unsigned char c = ch;
+ struct biosregs ireg;
- if (c == '\n')
+ if (ch == '\n')
putchar('\r'); /* \n -> \r\n */
- /* int $0x10 is known to have bugs involving touching registers
- it shouldn't. Be extra conservative... */
- asm volatile("pushal; pushw %%ds; int $0x10; popw %%ds; popal"
- : : "b" (0x0007), "c" (0x0001), "a" (0x0e00|ch));
+ initregs(&ireg);
+ ireg.bx = 0x0007;
+ ireg.cx = 0x0001;
+ ireg.ah = 0x0e;
+ ireg.al = ch;
+ intcall(0x10, &ireg, NULL);
}
void __attribute__((section(".inittext"))) puts(const char *str)
{
- int n = 0;
- while (*str) {
+ while (*str)
putchar(*str++);
- n++;
- }
}
/*
static u8 gettime(void)
{
- u16 ax = 0x0200;
- u16 cx, dx;
+ struct biosregs ireg, oreg;
- asm volatile("int $0x1a"
- : "+a" (ax), "=c" (cx), "=d" (dx)
- : : "ebx", "esi", "edi");
+ initregs(&ireg);
+ ireg.ah = 0x02;
+ intcall(0x1a, &ireg, &oreg);
- return dx >> 8;
+ return oreg.dh;
}
/*
*/
int getchar(void)
{
- u16 ax = 0;
- asm volatile("int $0x16" : "+a" (ax));
+ struct biosregs ireg, oreg;
+
+ initregs(&ireg);
+ /* ireg.ah = 0x00; */
+ intcall(0x16, &ireg, &oreg);
- return ax & 0xff;
+ return oreg.al;
}
static int kbd_pending(void)
{
- u8 pending;
- asm volatile("int $0x16; setnz %0"
- : "=qm" (pending)
- : "a" (0x0100));
- return pending;
+ struct biosregs ireg, oreg;
+
+ initregs(&ireg);
+ ireg.ah = 0x01;
+ intcall(0x16, &ireg, &oreg);
+
+ return !(oreg.eflags & X86_EFLAGS_ZF);
}
void kbd_flush(void)
*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright 2007 rPath, Inc. - All Rights Reserved
+ * Copyright 2009 Intel Corporation; author H. Peter Anvin
*
* This file is part of the Linux kernel, and is made available under
* the terms of the GNU General Public License version 2.
static int set_bios_mode(u8 mode)
{
- u16 ax;
+ struct biosregs ireg, oreg;
u8 new_mode;
- ax = mode; /* AH=0x00 Set Video Mode */
- asm volatile(INT10
- : "+a" (ax)
- : : "ebx", "ecx", "edx", "esi", "edi");
+ initregs(&ireg);
+ ireg.al = mode; /* AH=0x00 Set Video Mode */
+ intcall(0x10, &ireg, NULL);
- ax = 0x0f00; /* Get Current Video Mode */
- asm volatile(INT10
- : "+a" (ax)
- : : "ebx", "ecx", "edx", "esi", "edi");
+
+ ireg.ah = 0x0f; /* Get Current Video Mode */
+ intcall(0x10, &ireg, &oreg);
do_restore = 1; /* Assume video contents were lost */
- new_mode = ax & 0x7f; /* Not all BIOSes are clean with the top bit */
+
+ /* Not all BIOSes are clean with the top bit */
+ new_mode = ireg.al & 0x7f;
if (new_mode == mode)
return 0; /* Mode change OK */
/* Mode setting failed, but we didn't end up where we
started. That's bad. Try to revert to the original
video mode. */
- ax = boot_params.screen_info.orig_video_mode;
- asm volatile(INT10
- : "+a" (ax)
- : : "ebx", "ecx", "edx", "esi", "edi");
+ ireg.ax = boot_params.screen_info.orig_video_mode;
+ intcall(0x10, &ireg, NULL);
}
#endif
return -1;
*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright 2007 rPath, Inc. - All Rights Reserved
+ * Copyright 2009 Intel Corporation; author H. Peter Anvin
*
* This file is part of the Linux kernel, and is made available under
* the terms of the GNU General Public License version 2.
static int vesa_probe(void)
{
#if defined(CONFIG_VIDEO_VESA) || defined(CONFIG_FIRMWARE_EDID)
- u16 ax, cx, di;
+ struct biosregs ireg, oreg;
u16 mode;
addr_t mode_ptr;
struct mode_info *mi;
video_vesa.modes = GET_HEAP(struct mode_info, 0);
- ax = 0x4f00;
- di = (size_t)&vginfo;
- asm(INT10
- : "+a" (ax), "+D" (di), "=m" (vginfo)
- : : "ebx", "ecx", "edx", "esi");
+ initregs(&ireg);
+ ireg.ax = 0x4f00;
+ ireg.di = (size_t)&vginfo;
+ intcall(0x10, &ireg, &oreg);
- if (ax != 0x004f ||
+ if (ireg.ax != 0x004f ||
vginfo.signature != VESA_MAGIC ||
vginfo.version < 0x0102)
return 0; /* Not present */
memset(&vminfo, 0, sizeof vminfo); /* Just in case... */
- ax = 0x4f01;
- cx = mode;
- di = (size_t)&vminfo;
- asm(INT10
- : "+a" (ax), "+c" (cx), "+D" (di), "=m" (vminfo)
- : : "ebx", "edx", "esi");
+ ireg.ax = 0x4f01;
+ ireg.cx = mode;
+ ireg.di = (size_t)&vminfo;
+ intcall(0x10, &ireg, &oreg);
- if (ax != 0x004f)
+ if (ireg.ax != 0x004f)
continue;
if ((vminfo.mode_attr & 0x15) == 0x05) {
static int vesa_set_mode(struct mode_info *mode)
{
- u16 ax, bx, cx, di;
+ struct biosregs ireg, oreg;
int is_graphic;
u16 vesa_mode = mode->mode - VIDEO_FIRST_VESA;
memset(&vminfo, 0, sizeof vminfo); /* Just in case... */
- ax = 0x4f01;
- cx = vesa_mode;
- di = (size_t)&vminfo;
- asm(INT10
- : "+a" (ax), "+c" (cx), "+D" (di), "=m" (vminfo)
- : : "ebx", "edx", "esi");
+ initregs(&ireg);
+ ireg.ax = 0x4f01;
+ ireg.cx = vesa_mode;
+ ireg.di = (size_t)&vminfo;
+ intcall(0x10, &ireg, &oreg);
- if (ax != 0x004f)
+ if (oreg.ax != 0x004f)
return -1;
if ((vminfo.mode_attr & 0x15) == 0x05) {
}
- ax = 0x4f02;
- bx = vesa_mode;
- di = 0;
- asm volatile(INT10
- : "+a" (ax), "+b" (bx), "+D" (di)
- : : "ecx", "edx", "esi");
+ initregs(&ireg);
+ ireg.ax = 0x4f02;
+ ireg.bx = vesa_mode;
+ intcall(0x10, &ireg, &oreg);
- if (ax != 0x004f)
+ if (oreg.ax != 0x004f)
return -1;
graphic_mode = is_graphic;
/* Switch DAC to 8-bit mode */
static void vesa_dac_set_8bits(void)
{
+ struct biosregs ireg, oreg;
u8 dac_size = 6;
/* If possible, switch the DAC to 8-bit mode */
if (vginfo.capabilities & 1) {
- u16 ax, bx;
-
- ax = 0x4f08;
- bx = 0x0800;
- asm volatile(INT10
- : "+a" (ax), "+b" (bx)
- : : "ecx", "edx", "esi", "edi");
-
- if (ax == 0x004f)
- dac_size = bx >> 8;
+ initregs(&ireg);
+ ireg.ax = 0x4f08;
+ ireg.bh = 0x08;
+ intcall(0x10, &ireg, &oreg);
+ if (oreg.ax == 0x004f)
+ dac_size = oreg.bh;
}
/* Set the color sizes to the DAC size, and offsets to 0 */
- boot_params.screen_info.red_size = dac_size;
+ boot_params.screen_info.red_size = dac_size;
boot_params.screen_info.green_size = dac_size;
- boot_params.screen_info.blue_size = dac_size;
- boot_params.screen_info.rsvd_size = dac_size;
+ boot_params.screen_info.blue_size = dac_size;
+ boot_params.screen_info.rsvd_size = dac_size;
- boot_params.screen_info.red_pos = 0;
- boot_params.screen_info.green_pos = 0;
- boot_params.screen_info.blue_pos = 0;
- boot_params.screen_info.rsvd_pos = 0;
+ boot_params.screen_info.red_pos = 0;
+ boot_params.screen_info.green_pos = 0;
+ boot_params.screen_info.blue_pos = 0;
+ boot_params.screen_info.rsvd_pos = 0;
}
/* Save the VESA protected mode info */
static void vesa_store_pm_info(void)
{
- u16 ax, bx, di, es;
+ struct biosregs ireg, oreg;
- ax = 0x4f0a;
- bx = di = 0;
- asm("pushw %%es; "INT10"; movw %%es,%0; popw %%es"
- : "=d" (es), "+a" (ax), "+b" (bx), "+D" (di)
- : : "ecx", "esi");
+ initregs(&ireg);
+ ireg.ax = 0x4f0a;
+ intcall(0x10, &ireg, &oreg);
- if (ax != 0x004f)
+ if (oreg.ax != 0x004f)
return;
- boot_params.screen_info.vesapm_seg = es;
- boot_params.screen_info.vesapm_off = di;
+ boot_params.screen_info.vesapm_seg = oreg.es;
+ boot_params.screen_info.vesapm_off = oreg.di;
}
/*
void vesa_store_edid(void)
{
#ifdef CONFIG_FIRMWARE_EDID
- u16 ax, bx, cx, dx, di;
+ struct biosregs ireg, oreg;
/* Apparently used as a nonsense token... */
memset(&boot_params.edid_info, 0x13, sizeof boot_params.edid_info);
if (vginfo.version < 0x0200)
return; /* EDID requires VBE 2.0+ */
- ax = 0x4f15; /* VBE DDC */
- bx = 0x0000; /* Report DDC capabilities */
- cx = 0; /* Controller 0 */
- di = 0; /* ES:DI must be 0 by spec */
-
- /* Note: The VBE DDC spec is different from the main VESA spec;
- we genuinely have to assume all registers are destroyed here. */
-
- asm("pushw %%es; movw %2,%%es; "INT10"; popw %%es"
- : "+a" (ax), "+b" (bx), "+c" (cx), "+D" (di)
- : : "esi", "edx");
+ initregs(&ireg);
+ ireg.ax = 0x4f15; /* VBE DDC */
+ /* ireg.bx = 0x0000; */ /* Report DDC capabilities */
+ /* ireg.cx = 0; */ /* Controller 0 */
+ ireg.es = 0; /* ES:DI must be 0 by spec */
+ intcall(0x10, &ireg, &oreg);
- if (ax != 0x004f)
+ if (oreg.ax != 0x004f)
return; /* No EDID */
/* BH = time in seconds to transfer EDD information */
/* BL = DDC level supported */
- ax = 0x4f15; /* VBE DDC */
- bx = 0x0001; /* Read EDID */
- cx = 0; /* Controller 0 */
- dx = 0; /* EDID block number */
- di =(size_t) &boot_params.edid_info; /* (ES:)Pointer to block */
- asm(INT10
- : "+a" (ax), "+b" (bx), "+d" (dx), "=m" (boot_params.edid_info),
- "+c" (cx), "+D" (di)
- : : "esi");
+ ireg.ax = 0x4f15; /* VBE DDC */
+ ireg.bx = 0x0001; /* Read EDID */
+ /* ireg.cx = 0; */ /* Controller 0 */
+ /* ireg.dx = 0; */ /* EDID block number */
+ ireg.es = ds();
+ ireg.di =(size_t)&boot_params.edid_info; /* (ES:)Pointer to block */
+ intcall(0x10, &ireg, &oreg);
#endif /* CONFIG_FIRMWARE_EDID */
}
*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright 2007 rPath, Inc. - All Rights Reserved
+ * Copyright 2009 Intel Corporation; author H. Peter Anvin
*
* This file is part of the Linux kernel, and is made available under
* the terms of the GNU General Public License version 2.
/* Set basic 80x25 mode */
static u8 vga_set_basic_mode(void)
{
+ struct biosregs ireg, oreg;
u16 ax;
u8 rows;
u8 mode;
+ initregs(&ireg);
+
#ifdef CONFIG_VIDEO_400_HACK
if (adapter >= ADAPTER_VGA) {
- asm volatile(INT10
- : : "a" (0x1202), "b" (0x0030)
- : "ecx", "edx", "esi", "edi");
+ ireg.ax = 0x1202;
+ ireg.bx = 0x0030;
+ intcall(0x10, &ireg, NULL);
}
#endif
ax = 0x0f00;
- asm volatile(INT10
- : "+a" (ax)
- : : "ebx", "ecx", "edx", "esi", "edi");
-
- mode = (u8)ax;
+ intcall(0x10, &ireg, &oreg);
+ mode = oreg.al;
set_fs(0);
rows = rdfs8(0x484); /* rows minus one */
#ifndef CONFIG_VIDEO_400_HACK
- if ((ax == 0x5003 || ax == 0x5007) &&
+ if ((oreg.ax == 0x5003 || oreg.ax == 0x5007) &&
(rows == 0 || rows == 24))
return mode;
#endif
mode = 3;
/* Set the mode */
- ax = mode;
- asm volatile(INT10
- : "+a" (ax)
- : : "ebx", "ecx", "edx", "esi", "edi");
+ ireg.ax = mode; /* AH=0: set mode */
+ intcall(0x10, &ireg, NULL);
do_restore = 1;
return mode;
}
static void vga_set_8font(void)
{
/* Set 8x8 font - 80x43 on EGA, 80x50 on VGA */
+ struct biosregs ireg;
+
+ initregs(&ireg);
/* Set 8x8 font */
- asm volatile(INT10 : : "a" (0x1112), "b" (0));
+ ireg.ax = 0x1112;
+ /* ireg.bl = 0; */
+ intcall(0x10, &ireg, NULL);
/* Use alternate print screen */
- asm volatile(INT10 : : "a" (0x1200), "b" (0x20));
+ ireg.ax = 0x1200;
+ ireg.bl = 0x20;
+ intcall(0x10, &ireg, NULL);
/* Turn off cursor emulation */
- asm volatile(INT10 : : "a" (0x1201), "b" (0x34));
+ ireg.ax = 0x1201;
+ ireg.bl = 0x34;
+ intcall(0x10, &ireg, NULL);
/* Cursor is scan lines 6-7 */
- asm volatile(INT10 : : "a" (0x0100), "c" (0x0607));
+ ireg.ax = 0x0100;
+ ireg.cx = 0x0607;
+ intcall(0x10, &ireg, NULL);
}
static void vga_set_14font(void)
{
/* Set 9x14 font - 80x28 on VGA */
+ struct biosregs ireg;
+
+ initregs(&ireg);
/* Set 9x14 font */
- asm volatile(INT10 : : "a" (0x1111), "b" (0));
+ ireg.ax = 0x1111;
+ /* ireg.bl = 0; */
+ intcall(0x10, &ireg, NULL);
/* Turn off cursor emulation */
- asm volatile(INT10 : : "a" (0x1201), "b" (0x34));
+ ireg.ax = 0x1201;
+ ireg.bl = 0x34;
+ intcall(0x10, &ireg, NULL);
/* Cursor is scan lines 11-12 */
- asm volatile(INT10 : : "a" (0x0100), "c" (0x0b0c));
+ ireg.ax = 0x0100;
+ ireg.cx = 0x0b0c;
+ intcall(0x10, &ireg, NULL);
}
static void vga_set_80x43(void)
{
/* Set 80x43 mode on VGA (not EGA) */
+ struct biosregs ireg;
+
+ initregs(&ireg);
/* Set 350 scans */
- asm volatile(INT10 : : "a" (0x1201), "b" (0x30));
+ ireg.ax = 0x1201;
+ ireg.bl = 0x30;
+ intcall(0x10, &ireg, NULL);
/* Reset video mode */
- asm volatile(INT10 : : "a" (0x0003));
+ ireg.ax = 0x0003;
+ intcall(0x10, &ireg, NULL);
vga_set_8font();
}
*/
static int vga_probe(void)
{
- u16 ega_bx;
-
static const char *card_name[] = {
"CGA/MDA/HGC", "EGA", "VGA"
};
sizeof(ega_modes)/sizeof(struct mode_info),
sizeof(vga_modes)/sizeof(struct mode_info),
};
- u8 vga_flag;
- asm(INT10
- : "=b" (ega_bx)
- : "a" (0x1200), "b" (0x10) /* Check EGA/VGA */
- : "ecx", "edx", "esi", "edi");
+ struct biosregs ireg, oreg;
+
+ initregs(&ireg);
+
+ ireg.ax = 0x1200;
+ ireg.bl = 0x10; /* Check EGA/VGA */
+ intcall(0x10, &ireg, &oreg);
#ifndef _WAKEUP
- boot_params.screen_info.orig_video_ega_bx = ega_bx;
+ boot_params.screen_info.orig_video_ega_bx = oreg.bx;
#endif
/* If we have MDA/CGA/HGC then BL will be unchanged at 0x10 */
- if ((u8)ega_bx != 0x10) {
+ if (oreg.bl != 0x10) {
/* EGA/VGA */
- asm(INT10
- : "=a" (vga_flag)
- : "a" (0x1a00)
- : "ebx", "ecx", "edx", "esi", "edi");
+ ireg.ax = 0x1a00;
+ intcall(0x10, &ireg, &oreg);
- if (vga_flag == 0x1a) {
+ if (oreg.al == 0x1a) {
adapter = ADAPTER_VGA;
#ifndef _WAKEUP
boot_params.screen_info.orig_video_isVGA = 1;
*
* Copyright (C) 1991, 1992 Linus Torvalds
* Copyright 2007 rPath, Inc. - All Rights Reserved
+ * Copyright 2009 Intel Corporation; author H. Peter Anvin
*
* This file is part of the Linux kernel, and is made available under
* the terms of the GNU General Public License version 2.
static void store_cursor_position(void)
{
- u16 curpos;
- u16 ax, bx;
+ struct biosregs ireg, oreg;
- ax = 0x0300;
- bx = 0;
- asm(INT10
- : "=d" (curpos), "+a" (ax), "+b" (bx)
- : : "ecx", "esi", "edi");
+ initregs(&ireg);
+ ireg.ah = 0x03;
+ intcall(0x10, &ireg, &oreg);
- boot_params.screen_info.orig_x = curpos;
- boot_params.screen_info.orig_y = curpos >> 8;
+ boot_params.screen_info.orig_x = oreg.dl;
+ boot_params.screen_info.orig_y = oreg.dh;
}
static void store_video_mode(void)
{
- u16 ax, page;
+ struct biosregs ireg, oreg;
/* N.B.: the saving of the video page here is a bit silly,
since we pretty much assume page 0 everywhere. */
- ax = 0x0f00;
- asm(INT10
- : "+a" (ax), "=b" (page)
- : : "ecx", "edx", "esi", "edi");
+ initregs(&ireg);
+ ireg.ah = 0x0f;
+ intcall(0x10, &ireg, &oreg);
/* Not all BIOSes are clean with respect to the top bit */
- boot_params.screen_info.orig_video_mode = ax & 0x7f;
- boot_params.screen_info.orig_video_page = page >> 8;
+ boot_params.screen_info.orig_video_mode = oreg.al & 0x7f;
+ boot_params.screen_info.orig_video_page = oreg.bh;
}
/*
int y;
addr_t dst = 0;
u16 *src = saved.data;
- u16 ax, bx, dx;
+ struct biosregs ireg;
if (graphic_mode)
return; /* Can't restore onto a graphic mode */
}
/* Restore cursor position */
- ax = 0x0200; /* Set cursor position */
- bx = 0; /* Page number (<< 8) */
- dx = (saved.cury << 8)+saved.curx;
- asm volatile(INT10
- : "+a" (ax), "+b" (bx), "+d" (dx)
- : : "ecx", "esi", "edi");
+ initregs(&ireg);
+ ireg.ah = 0x02; /* Set cursor position */
+ ireg.dh = saved.cury;
+ ireg.dl = saved.curx;
+ intcall(0x10, &ireg, NULL);
}
#else
#define save_screen() ((void)0)
extern int do_restore; /* Restore screen contents */
extern int graphic_mode; /* Graphics mode with linear frame buffer */
-/*
- * int $0x10 is notorious for touching registers it shouldn't.
- * gcc doesn't like %ebp being clobbered, so define it as a push/pop
- * sequence here.
- *
- * A number of systems, including the original PC can clobber %bp in
- * certain circumstances, like when scrolling. There exists at least
- * one Trident video card which could clobber DS under a set of
- * circumstances that we are unlikely to encounter (scrolling when
- * using an extended graphics mode of more than 800x600 pixels), but
- * it's cheap insurance to deal with that here.
- */
-#define INT10 "pushl %%ebp; pushw %%ds; int $0x10; popw %%ds; popl %%ebp"
-
/* Accessing VGA indexed registers */
static inline u8 in_idx(u16 port, u8 index)
{
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc4
-# Tue Feb 24 15:50:58 2009
+# Linux kernel version: 2.6.30-rc2
+# Mon May 11 16:21:55 2009
#
# CONFIG_64BIT is not set
CONFIG_X86_32=y
# CONFIG_X86_64 is not set
CONFIG_X86=y
+CONFIG_OUTPUT_FORMAT="elf32-i386"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
# CONFIG_HAVE_CPUMASK_OF_CPU_MAP is not set
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
# CONFIG_AUDIT_ARCH is not set
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_X86_SMP=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_32_SMP=y
CONFIG_X86_HT=y
-CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
+CONFIG_X86_32_LAZY_GS=y
CONFIG_KTIME_SCALAR=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_SPARSE_IRQ=y
-CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
+# CONFIG_X86_BIGSMP is not set
+CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_ELAN is not set
-# CONFIG_X86_GENERICARCH is not set
-# CONFIG_X86_VSMP is not set
# CONFIG_X86_RDC321X is not set
+# CONFIG_X86_32_NON_STANDARD is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_GENERIC_CPU is not set
CONFIG_X86_GENERIC=y
CONFIG_X86_CPU=y
+CONFIG_X86_L1_CACHE_BYTES=64
+CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=7
+CONFIG_X86_L1_CACHE_SHIFT=5
CONFIG_X86_XADD=y
# CONFIG_X86_PPRO_FENCE is not set
CONFIG_X86_WP_WORKS_OK=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_CYRIX_32=y
CONFIG_CPU_SUP_AMD=y
-CONFIG_CPU_SUP_CENTAUR_32=y
+CONFIG_CPU_SUP_CENTAUR=y
CONFIG_CPU_SUP_TRANSMETA_32=y
CONFIG_CPU_SUP_UMC_32=y
CONFIG_X86_DS=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
+# CONFIG_X86_CPU_DEBUG is not set
# CONFIG_NOHIGHMEM is not set
CONFIG_HIGHMEM4G=y
# CONFIG_HIGHMEM64G is not set
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_HIGHPTE=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_PAT=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
+# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_CRASH_DUMP=y
# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
-# CONFIG_RELOCATABLE is not set
-CONFIG_PHYSICAL_ALIGN=0x200000
+CONFIG_RELOCATABLE=y
+CONFIG_X86_NEED_RELOCS=y
+CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
CONFIG_PCI_DIRECT=y
CONFIG_PCI_MMCONFIG=y
CONFIG_PCI_DOMAINS=y
+# CONFIG_DMAR is not set
CONFIG_PCIEPORTBUS=y
# CONFIG_HOTPLUG_PCI_PCIE is not set
CONFIG_PCIEAER=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
# CONFIG_ISA is not set
# CONFIG_MCA is not set
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y
#
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
CONFIG_E1000E=y
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
CONFIG_TR=y
# CONFIG_IBMOL is not set
# CONFIG_IBMLS is not set
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
-# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
# CONFIG_P54_COMMON is not set
CONFIG_ATH5K=y
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH9K is not set
+# CONFIG_AR9170_USB is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWL3945 is not set
+# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
+# CONFIG_HERMES is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_HW_RANDOM_INTEL=y
CONFIG_HW_RANDOM_AMD=y
CONFIG_HW_RANDOM_GEODE=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_FB_3DFX is not set
# CONFIG_FB_VOODOO1 is not set
# CONFIG_FB_VT8623 is not set
-# CONFIG_FB_CYBLA is not set
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
# CONFIG_DEBUG_HIGHMEM is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_HW_BRANCH_TRACER=y
+CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_HW_BRANCH_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
CONFIG_DEBUG_NX_TEST=m
# CONFIG_4KSTACKS is not set
CONFIG_DOUBLEFAULT=y
-# CONFIG_MMIOTRACE is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_IMA is not set
CONFIG_CRYPTO=y
#
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
# CONFIG_CRYPTO_DEV_GEODE is not set
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_LGUEST is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
# CONFIG_LIBCRC32C is not set
CONFIG_AUDIT_GENERIC=y
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc4
-# Tue Feb 24 15:44:16 2009
+# Linux kernel version: 2.6.30-rc2
+# Mon May 11 16:22:00 2009
#
CONFIG_64BIT=y
# CONFIG_X86_32 is not set
CONFIG_X86_64=y
CONFIG_X86=y
+CONFIG_OUTPUT_FORMAT="elf64-x86-64"
CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig"
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_ARCH_HAS_DEFAULT_IDLE=y
CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
+CONFIG_HAVE_DYNAMIC_PER_CPU_AREA=y
CONFIG_HAVE_CPUMASK_OF_CPU_MAP=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_ARCH_POPULATES_NODE_MAP=y
CONFIG_AUDIT_ARCH=y
CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_GENERIC_IRQ_PROBE=y
CONFIG_GENERIC_PENDING_IRQ=y
-CONFIG_X86_SMP=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
CONFIG_X86_64_SMP=y
CONFIG_X86_HT=y
-CONFIG_X86_BIOS_REBOOT=y
CONFIG_X86_TRAMPOLINE=y
# CONFIG_KTIME_SCALAR is not set
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
CONFIG_INIT_ENV_ARG_LIMIT=32
CONFIG_LOCALVERSION=""
# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_HAVE_KERNEL_GZIP=y
+CONFIG_HAVE_KERNEL_BZIP2=y
+CONFIG_HAVE_KERNEL_LZMA=y
+CONFIG_KERNEL_GZIP=y
+# CONFIG_KERNEL_BZIP2 is not set
+# CONFIG_KERNEL_LZMA is not set
CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
CONFIG_TASKSTATS=y
CONFIG_NET_NS=y
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+CONFIG_HAVE_DMA_API_DEBUG=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-CONFIG_BLK_DEV_IO_TRACE=y
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
CONFIG_SMP=y
CONFIG_SPARSE_IRQ=y
-# CONFIG_NUMA_MIGRATE_IRQ_DESC is not set
-CONFIG_X86_FIND_SMP_CONFIG=y
CONFIG_X86_MPPARSE=y
-# CONFIG_X86_ELAN is not set
-# CONFIG_X86_GENERICARCH is not set
+CONFIG_X86_EXTENDED_PLATFORM=y
# CONFIG_X86_VSMP is not set
+# CONFIG_X86_UV is not set
CONFIG_SCHED_OMIT_FRAME_POINTER=y
# CONFIG_PARAVIRT_GUEST is not set
# CONFIG_MEMTEST is not set
# CONFIG_MCORE2 is not set
CONFIG_GENERIC_CPU=y
CONFIG_X86_CPU=y
-CONFIG_X86_L1_CACHE_BYTES=128
-CONFIG_X86_INTERNODE_CACHE_BYTES=128
+CONFIG_X86_L1_CACHE_BYTES=64
+CONFIG_X86_INTERNODE_CACHE_BYTES=64
CONFIG_X86_CMPXCHG=y
-CONFIG_X86_L1_CACHE_SHIFT=7
+CONFIG_X86_L1_CACHE_SHIFT=6
CONFIG_X86_WP_WORKS_OK=y
CONFIG_X86_TSC=y
CONFIG_X86_CMPXCHG64=y
CONFIG_X86_DEBUGCTLMSR=y
CONFIG_CPU_SUP_INTEL=y
CONFIG_CPU_SUP_AMD=y
-CONFIG_CPU_SUP_CENTAUR_64=y
+CONFIG_CPU_SUP_CENTAUR=y
CONFIG_X86_DS=y
CONFIG_X86_PTRACE_BTS=y
CONFIG_HPET_TIMER=y
CONFIG_X86_MCE=y
CONFIG_X86_MCE_INTEL=y
CONFIG_X86_MCE_AMD=y
+CONFIG_X86_MCE_THRESHOLD=y
# CONFIG_I8K is not set
CONFIG_MICROCODE=y
CONFIG_MICROCODE_INTEL=y
CONFIG_MICROCODE_OLD_INTERFACE=y
CONFIG_X86_MSR=y
CONFIG_X86_CPUID=y
+# CONFIG_X86_CPU_DEBUG is not set
CONFIG_ARCH_PHYS_ADDR_T_64BIT=y
CONFIG_DIRECT_GBPAGES=y
CONFIG_NUMA=y
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_X86_CHECK_BIOS_CORRUPTION=y
CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK=y
CONFIG_X86_RESERVE_LOW_64K=y
CONFIG_X86_PAT=y
CONFIG_EFI=y
CONFIG_SECCOMP=y
+# CONFIG_CC_STACKPROTECTOR is not set
# CONFIG_HZ_100 is not set
# CONFIG_HZ_250 is not set
# CONFIG_HZ_300 is not set
CONFIG_SCHED_HRTICK=y
CONFIG_KEXEC=y
CONFIG_CRASH_DUMP=y
+# CONFIG_KEXEC_JUMP is not set
CONFIG_PHYSICAL_START=0x1000000
-# CONFIG_RELOCATABLE is not set
-CONFIG_PHYSICAL_ALIGN=0x200000
+CONFIG_RELOCATABLE=y
+CONFIG_PHYSICAL_ALIGN=0x1000000
CONFIG_HOTPLUG_CPU=y
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CMDLINE_BOOL is not set
CONFIG_ACPI_BLACKLIST_YEAR=0
# CONFIG_ACPI_DEBUG is not set
# CONFIG_ACPI_PCI_SLOT is not set
-CONFIG_ACPI_SYSTEM=y
CONFIG_X86_PM_TIMER=y
CONFIG_ACPI_CONTAINER=y
# CONFIG_ACPI_SBS is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
CONFIG_HT_IRQ=y
+# CONFIG_PCI_IOV is not set
CONFIG_ISA_DMA_API=y
CONFIG_K8_NB=y
CONFIG_PCCARD=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y
#
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
CONFIG_HAMRADIO=y
#
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
-# CONFIG_SGI_XP is not set
# CONFIG_HP_ILO is not set
-# CONFIG_SGI_GRU is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_ATA_ACPI=y
CONFIG_MACINTOSH_DRIVERS=y
CONFIG_MAC_EMUMOUSEBTN=y
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_IFB is not set
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
CONFIG_NET_VENDOR_3COM=y
# CONFIG_VORTEX is not set
# CONFIG_TYPHOON is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
CONFIG_TR=y
# CONFIG_IBMOL is not set
# CONFIG_3C359 is not set
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
# CONFIG_AIRO is not set
-# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
# CONFIG_AIRO_CS is not set
# CONFIG_PCMCIA_WL3501 is not set
# CONFIG_PRISM54 is not set
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
# CONFIG_P54_COMMON is not set
CONFIG_ATH5K=y
# CONFIG_ATH5K_DEBUG is not set
# CONFIG_ATH9K is not set
+# CONFIG_AR9170_USB is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWL3945 is not set
+# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
+# CONFIG_HERMES is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
# CONFIG_TABLET_USB_KBTAB is not set
# CONFIG_TABLET_USB_WACOM is not set
CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
# CONFIG_LEGACY_PTYS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_HW_RANDOM_INTEL is not set
# CONFIG_HW_RANDOM_AMD is not set
CONFIG_NVRAM=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_K8TEMP is not set
# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_ATK0110 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_FSCHER is not set
# CONFIG_SENSORS_FSCPOS is not set
# CONFIG_SENSORS_FSCHMD is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_CORETEMP is not set
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
CONFIG_BACKLIGHT_LCD_SUPPORT=y
# CONFIG_LCD_CLASS_DEVICE is not set
CONFIG_BACKLIGHT_CLASS_DEVICE=y
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
CONFIG_LOGITECH_FF=y
# CONFIG_LOGIRUMBLEPAD2_FF is not set
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
#
# CONFIG_LEDS_ALIX2 is not set
# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_CLEVO_MAIL is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
# CONFIG_LEDS_TRIGGER_HEARTBEAT is not set
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
CONFIG_EDAC=y
# DMA Devices
#
# CONFIG_INTEL_IOATDMA is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
CONFIG_X86_PLATFORM_DEVICES=y
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
# CONFIG_FUSE_FS is not set
CONFIG_GENERIC_ACL=y
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
#
# CD-ROM/DVD Filesystems
#
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
# CONFIG_DEBUG_INFO is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_USER_STACKTRACE_SUPPORT=y
+CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_FUNCTION_TRACE_MCOUNT_TEST=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_HAVE_HW_BRANCH_TRACER=y
+CONFIG_HAVE_FTRACE_SYSCALLS=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
# CONFIG_SYSPROF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_FTRACE_SYSCALLS is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_POWER_TRACER is not set
# CONFIG_STACK_TRACER is not set
# CONFIG_HW_BRANCH_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+CONFIG_BLK_DEV_IO_TRACE=y
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_MMIOTRACE is not set
CONFIG_PROVIDE_OHCI1394_DMA_INIT=y
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_DMA_API_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_EARLY_PRINTK_DBGP=y
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_DEBUG_PER_CPU_MAPS is not set
# CONFIG_X86_PTDUMP is not set
CONFIG_DEBUG_RODATA=y
# CONFIG_DEBUG_RODATA_TEST is not set
CONFIG_DEBUG_NX_TEST=m
# CONFIG_IOMMU_DEBUG is not set
-# CONFIG_MMIOTRACE is not set
+CONFIG_HAVE_MMIOTRACE_SUPPORT=y
CONFIG_IO_DELAY_TYPE_0X80=0
CONFIG_IO_DELAY_TYPE_0XED=1
CONFIG_IO_DELAY_TYPE_UDELAY=2
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
# CONFIG_SECURITY_SMACK is not set
+# CONFIG_SECURITY_TOMOYO is not set
+# CONFIG_IMA is not set
CONFIG_CRYPTO=y
#
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
#
CONFIG_CRYPTO_AES=y
# CONFIG_CRYPTO_AES_X86_64 is not set
+# CONFIG_CRYPTO_AES_NI_INTEL is not set
# CONFIG_CRYPTO_ANUBIS is not set
CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_BLOWFISH is not set
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
CONFIG_HAVE_KVM=y
+CONFIG_HAVE_KVM_IRQCHIP=y
CONFIG_VIRTUALIZATION=y
# CONFIG_KVM is not set
# CONFIG_VIRTIO_PCI is not set
# CONFIG_VIRTIO_BALLOON is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
#include <linux/types.h>
#include <linux/stddef.h>
+#include <linux/stringify.h>
#include <asm/asm.h>
/*
const unsigned char *const *find_nop_table(void);
+/* alternative assembly primitive: */
+#define ALTERNATIVE(oldinstr, newinstr, feature) \
+ \
+ "661:\n\t" oldinstr "\n662:\n" \
+ ".section .altinstructions,\"a\"\n" \
+ _ASM_ALIGN "\n" \
+ _ASM_PTR "661b\n" /* label */ \
+ _ASM_PTR "663f\n" /* new instruction */ \
+ " .byte " __stringify(feature) "\n" /* feature bit */ \
+ " .byte 662b-661b\n" /* sourcelen */ \
+ " .byte 664f-663f\n" /* replacementlen */ \
+ ".previous\n" \
+ ".section .altinstr_replacement, \"ax\"\n" \
+ "663:\n\t" newinstr "\n664:\n" /* replacement */ \
+ ".previous"
+
/*
* Alternative instructions for different CPU types or capabilities.
*
* without volatile and memory clobber.
*/
#define alternative(oldinstr, newinstr, feature) \
- asm volatile ("661:\n\t" oldinstr "\n662:\n" \
- ".section .altinstructions,\"a\"\n" \
- _ASM_ALIGN "\n" \
- _ASM_PTR "661b\n" /* label */ \
- _ASM_PTR "663f\n" /* new instruction */ \
- " .byte %c0\n" /* feature bit */ \
- " .byte 662b-661b\n" /* sourcelen */ \
- " .byte 664f-663f\n" /* replacementlen */ \
- ".previous\n" \
- ".section .altinstr_replacement,\"ax\"\n" \
- "663:\n\t" newinstr "\n664:\n" /* replacement */ \
- ".previous" :: "i" (feature) : "memory")
+ asm volatile (ALTERNATIVE(oldinstr, newinstr, feature) : : : "memory")
/*
* Alternative inline assembly with input.
* Best is to use constraints that are fixed size (like (%1) ... "r")
* If you use variable sized constraints like "m" or "g" in the
* replacement make sure to pad to the worst case length.
+ * Leaving an unused argument 0 to keep API compatibility.
*/
#define alternative_input(oldinstr, newinstr, feature, input...) \
- asm volatile ("661:\n\t" oldinstr "\n662:\n" \
- ".section .altinstructions,\"a\"\n" \
- _ASM_ALIGN "\n" \
- _ASM_PTR "661b\n" /* label */ \
- _ASM_PTR "663f\n" /* new instruction */ \
- " .byte %c0\n" /* feature bit */ \
- " .byte 662b-661b\n" /* sourcelen */ \
- " .byte 664f-663f\n" /* replacementlen */ \
- ".previous\n" \
- ".section .altinstr_replacement,\"ax\"\n" \
- "663:\n\t" newinstr "\n664:\n" /* replacement */ \
- ".previous" :: "i" (feature), ##input)
+ asm volatile (ALTERNATIVE(oldinstr, newinstr, feature) \
+ : : "i" (0), ## input)
/* Like alternative_input, but with a single output argument */
#define alternative_io(oldinstr, newinstr, feature, output, input...) \
- asm volatile ("661:\n\t" oldinstr "\n662:\n" \
- ".section .altinstructions,\"a\"\n" \
- _ASM_ALIGN "\n" \
- _ASM_PTR "661b\n" /* label */ \
- _ASM_PTR "663f\n" /* new instruction */ \
- " .byte %c[feat]\n" /* feature bit */ \
- " .byte 662b-661b\n" /* sourcelen */ \
- " .byte 664f-663f\n" /* replacementlen */ \
- ".previous\n" \
- ".section .altinstr_replacement,\"ax\"\n" \
- "663:\n\t" newinstr "\n664:\n" /* replacement */ \
- ".previous" : output : [feat] "i" (feature), ##input)
+ asm volatile (ALTERNATIVE(oldinstr, newinstr, feature) \
+ : output : "i" (0), ## input)
/*
* use this macro(s) if you need more than one output parameter
extern void native_apic_icr_write(u32 low, u32 id);
extern u64 native_apic_icr_read(void);
-#define EIM_8BIT_APIC_ID 0
-#define EIM_32BIT_APIC_ID 1
+extern int x2apic_mode;
#ifdef CONFIG_X86_X2APIC
/*
return val;
}
-extern int x2apic, x2apic_phys;
+extern int x2apic_phys;
extern void check_x2apic(void);
extern void enable_x2apic(void);
-extern void enable_IR_x2apic(void);
extern void x2apic_icr_write(u32 low, u32 id);
static inline int x2apic_enabled(void)
{
return 1;
return 0;
}
+
+#define x2apic_supported() (cpu_has_x2apic)
#else
static inline void check_x2apic(void)
{
static inline void enable_x2apic(void)
{
}
-static inline void enable_IR_x2apic(void)
-{
-}
static inline int x2apic_enabled(void)
{
return 0;
}
-#define x2apic 0
-
+#define x2apic_preenabled 0
+#define x2apic_supported() 0
#endif
-extern int get_physical_broadcast(void);
+extern void enable_IR_x2apic(void);
-#ifdef CONFIG_X86_X2APIC
-static inline void ack_x2APIC_irq(void)
-{
- /* Docs say use 0 for future compatibility */
- native_apic_msr_write(APIC_EOI, 0);
-}
-#endif
+extern int get_physical_broadcast(void);
+extern void apic_disable(void);
extern int lapic_get_maxlvt(void);
extern void clear_local_APIC(void);
extern void connect_bsp_APIC(void);
#define local_apic_timer_c2_ok 1
static inline void init_apic_mappings(void) { }
static inline void disable_local_APIC(void) { }
-
+static inline void apic_disable(void) { }
#endif /* !CONFIG_X86_LOCAL_APIC */
#ifdef CONFIG_X86_64
{
unsigned int ver = GET_APIC_VERSION(apic_read(APIC_LVR));
- if (APIC_XAPIC(ver))
+ if (APIC_XAPIC(ver) || boot_cpu_has(X86_FEATURE_EXTD_APICID))
return (x >> 24) & 0xFF;
else
return (x >> 24) & 0x0F;
extern void default_setup_apic_routing(void);
#ifdef CONFIG_X86_32
+
+extern struct apic apic_default;
+
/*
* Set up the logical destination ID.
*
# define APIC_INTEGRATED(x) (1)
#endif
#define APIC_XAPIC(x) ((x) >= 0x14)
+#define APIC_EXT_SPACE(x) ((x) & 0x80000000)
#define APIC_TASKPRI 0x80
#define APIC_TPRI_MASK 0xFFu
#define APIC_ARBPRI 0x90
#define APIC_TDR_DIV_32 0x8
#define APIC_TDR_DIV_64 0x9
#define APIC_TDR_DIV_128 0xA
-#define APIC_EILVT0 0x500
+#define APIC_EFEAT 0x400
+#define APIC_ECTRL 0x410
+#define APIC_EILVTn(n) (0x500 + 0x10 * n)
#define APIC_EILVT_NR_AMD_K8 1 /* # of extended interrupts */
#define APIC_EILVT_NR_AMD_10H 4
#define APIC_EILVT_LVTOFF(x) (((x) >> 4) & 0xF)
#define APIC_EILVT_MSG_NMI 0x4
#define APIC_EILVT_MSG_EXT 0x7
#define APIC_EILVT_MASKED (1 << 16)
-#define APIC_EILVT1 0x510
-#define APIC_EILVT2 0x520
-#define APIC_EILVT3 0x530
#define APIC_BASE (fix_to_virt(FIX_APIC_BASE))
#define APIC_BASE_MSR 0x800
#ifdef __KERNEL__
+#include <asm/page_types.h>
+
/* Physical address where kernel should be loaded. */
#define LOAD_PHYSICAL_ADDR ((CONFIG_PHYSICAL_START \
+ (CONFIG_PHYSICAL_ALIGN - 1)) \
& ~(CONFIG_PHYSICAL_ALIGN - 1))
+/* Minimum kernel alignment, as a power of two */
+#ifdef CONFIG_x86_64
+#define MIN_KERNEL_ALIGN_LG2 PMD_SHIFT
+#else
+#define MIN_KERNEL_ALIGN_LG2 (PAGE_SHIFT+1)
+#endif
+#define MIN_KERNEL_ALIGN (_AC(1, UL) << MIN_KERNEL_ALIGN_LG2)
+
+#if (CONFIG_PHYSICAL_ALIGN & (CONFIG_PHYSICAL_ALIGN-1)) || \
+ (CONFIG_PHYSICAL_ALIGN < (_AC(1, UL) << MIN_KERNEL_ALIGN_LG2))
+#error "Invalid value for CONFIG_PHYSICAL_ALIGN"
+#endif
+
#ifdef CONFIG_KERNEL_BZIP2
#define BOOT_HEAP_SIZE 0x400000
#else /* !CONFIG_KERNEL_BZIP2 */
__u32 ramdisk_size;
__u32 bootsect_kludge;
__u16 heap_end_ptr;
- __u16 _pad1;
+ __u8 ext_loader_ver;
+ __u8 ext_loader_type;
__u32 cmd_line_ptr;
__u32 initrd_addr_max;
__u32 kernel_alignment;
CPU_VALUE_BIT, /* value */
};
-#define CPU_FILE_VALUE (1 << CPU_VALUE_BIT)
-
-/*
- * DisplayFamily_DisplayModel Processor Families/Processor Number Series
- * -------------------------- ------------------------------------------
- * 05_01, 05_02, 05_04 Pentium, Pentium with MMX
- *
- * 06_01 Pentium Pro
- * 06_03, 06_05 Pentium II Xeon, Pentium II
- * 06_07, 06_08, 06_0A, 06_0B Pentium III Xeon, Pentum III
- *
- * 06_09, 060D Pentium M
- *
- * 06_0E Core Duo, Core Solo
- *
- * 06_0F Xeon 3000, 3200, 5100, 5300, 7300 series,
- * Core 2 Quad, Core 2 Extreme, Core 2 Duo,
- * Pentium dual-core
- * 06_17 Xeon 5200, 5400 series, Core 2 Quad Q9650
- *
- * 06_1C Atom
- *
- * 0F_00, 0F_01, 0F_02 Xeon, Xeon MP, Pentium 4
- * 0F_03, 0F_04 Xeon, Xeon MP, Pentium 4, Pentium D
- *
- * 0F_06 Xeon 7100, 5000 Series, Xeon MP,
- * Pentium 4, Pentium D
- */
-
-/* Register processors bits */
-enum cpu_processor_bit {
- CPU_NONE,
-/* Intel */
- CPU_INTEL_PENTIUM_BIT,
- CPU_INTEL_P6_BIT,
- CPU_INTEL_PENTIUM_M_BIT,
- CPU_INTEL_CORE_BIT,
- CPU_INTEL_CORE2_BIT,
- CPU_INTEL_ATOM_BIT,
- CPU_INTEL_XEON_P4_BIT,
- CPU_INTEL_XEON_MP_BIT,
-/* AMD */
- CPU_AMD_K6_BIT,
- CPU_AMD_K7_BIT,
- CPU_AMD_K8_BIT,
- CPU_AMD_0F_BIT,
- CPU_AMD_10_BIT,
- CPU_AMD_11_BIT,
-};
-
-#define CPU_INTEL_PENTIUM (1 << CPU_INTEL_PENTIUM_BIT)
-#define CPU_INTEL_P6 (1 << CPU_INTEL_P6_BIT)
-#define CPU_INTEL_PENTIUM_M (1 << CPU_INTEL_PENTIUM_M_BIT)
-#define CPU_INTEL_CORE (1 << CPU_INTEL_CORE_BIT)
-#define CPU_INTEL_CORE2 (1 << CPU_INTEL_CORE2_BIT)
-#define CPU_INTEL_ATOM (1 << CPU_INTEL_ATOM_BIT)
-#define CPU_INTEL_XEON_P4 (1 << CPU_INTEL_XEON_P4_BIT)
-#define CPU_INTEL_XEON_MP (1 << CPU_INTEL_XEON_MP_BIT)
-
-#define CPU_INTEL_PX (CPU_INTEL_P6 | CPU_INTEL_PENTIUM_M)
-#define CPU_INTEL_COREX (CPU_INTEL_CORE | CPU_INTEL_CORE2)
-#define CPU_INTEL_XEON (CPU_INTEL_XEON_P4 | CPU_INTEL_XEON_MP)
-#define CPU_CO_AT (CPU_INTEL_CORE | CPU_INTEL_ATOM)
-#define CPU_C2_AT (CPU_INTEL_CORE2 | CPU_INTEL_ATOM)
-#define CPU_CX_AT (CPU_INTEL_COREX | CPU_INTEL_ATOM)
-#define CPU_CX_XE (CPU_INTEL_COREX | CPU_INTEL_XEON)
-#define CPU_P6_XE (CPU_INTEL_P6 | CPU_INTEL_XEON)
-#define CPU_PM_CO_AT (CPU_INTEL_PENTIUM_M | CPU_CO_AT)
-#define CPU_C2_AT_XE (CPU_C2_AT | CPU_INTEL_XEON)
-#define CPU_CX_AT_XE (CPU_CX_AT | CPU_INTEL_XEON)
-#define CPU_P6_CX_AT (CPU_INTEL_P6 | CPU_CX_AT)
-#define CPU_P6_CX_XE (CPU_P6_XE | CPU_INTEL_COREX)
-#define CPU_P6_CX_AT_XE (CPU_INTEL_P6 | CPU_CX_AT_XE)
-#define CPU_PM_CX_AT_XE (CPU_INTEL_PENTIUM_M | CPU_CX_AT_XE)
-#define CPU_PM_CX_AT (CPU_INTEL_PENTIUM_M | CPU_CX_AT)
-#define CPU_PM_CX_XE (CPU_INTEL_PENTIUM_M | CPU_CX_XE)
-#define CPU_PX_CX_AT (CPU_INTEL_PX | CPU_CX_AT)
-#define CPU_PX_CX_AT_XE (CPU_INTEL_PX | CPU_CX_AT_XE)
-
-/* Select all supported Intel CPUs */
-#define CPU_INTEL_ALL (CPU_INTEL_PENTIUM | CPU_PX_CX_AT_XE)
-
-#define CPU_AMD_K6 (1 << CPU_AMD_K6_BIT)
-#define CPU_AMD_K7 (1 << CPU_AMD_K7_BIT)
-#define CPU_AMD_K8 (1 << CPU_AMD_K8_BIT)
-#define CPU_AMD_0F (1 << CPU_AMD_0F_BIT)
-#define CPU_AMD_10 (1 << CPU_AMD_10_BIT)
-#define CPU_AMD_11 (1 << CPU_AMD_11_BIT)
-
-#define CPU_K10_PLUS (CPU_AMD_10 | CPU_AMD_11)
-#define CPU_K0F_PLUS (CPU_AMD_0F | CPU_K10_PLUS)
-#define CPU_K8_PLUS (CPU_AMD_K8 | CPU_K0F_PLUS)
-#define CPU_K7_PLUS (CPU_AMD_K7 | CPU_K8_PLUS)
-
-/* Select all supported AMD CPUs */
-#define CPU_AMD_ALL (CPU_AMD_K6 | CPU_K7_PLUS)
-
-/* Select all supported CPUs */
-#define CPU_ALL (CPU_INTEL_ALL | CPU_AMD_ALL)
+#define CPU_FILE_VALUE (1 << CPU_VALUE_BIT)
#define MAX_CPU_FILES 512
unsigned min; /* Register range min */
unsigned max; /* Register range max */
unsigned flag; /* Supported flags */
- unsigned model; /* Supported models */
};
#endif /* _ASM_X86_CPU_DEBUG_H */
#define X86_FEATURE_TSC (0*32+ 4) /* Time Stamp Counter */
#define X86_FEATURE_MSR (0*32+ 5) /* Model-Specific Registers */
#define X86_FEATURE_PAE (0*32+ 6) /* Physical Address Extensions */
-#define X86_FEATURE_MCE (0*32+ 7) /* Machine Check Architecture */
+#define X86_FEATURE_MCE (0*32+ 7) /* Machine Check Exception */
#define X86_FEATURE_CX8 (0*32+ 8) /* CMPXCHG8 instruction */
#define X86_FEATURE_APIC (0*32+ 9) /* Onboard APIC */
#define X86_FEATURE_SEP (0*32+11) /* SYSENTER/SYSEXIT */
#define X86_FEATURE_TSC_RELIABLE (3*32+23) /* TSC is known to be reliable */
#define X86_FEATURE_NONSTOP_TSC (3*32+24) /* TSC does not stop in C states */
#define X86_FEATURE_CLFLUSH_MONITOR (3*32+25) /* "" clflush reqd with monitor */
+#define X86_FEATURE_EXTD_APICID (3*32+26) /* has extended APICID (8 bits) */
/* Intel-defined CPU features, CPUID level 0x00000001 (ecx), word 4 */
#define X86_FEATURE_XMM3 (4*32+ 0) /* "pni" SSE-3 */
#define clear_cpu_cap(c, bit) clear_bit(bit, (unsigned long *)((c)->x86_capability))
#define setup_clear_cpu_cap(bit) do { \
clear_cpu_cap(&boot_cpu_data, bit); \
- set_bit(bit, (unsigned long *)cleared_cpu_caps); \
+ set_bit(bit, (unsigned long *)cpu_caps_cleared); \
} while (0)
#define setup_force_cpu_cap(bit) do { \
set_cpu_cap(&boot_cpu_data, bit); \
- clear_bit(bit, (unsigned long *)cleared_cpu_caps); \
+ set_bit(bit, (unsigned long *)cpu_caps_set); \
} while (0)
#define cpu_has_fpu boot_cpu_has(X86_FEATURE_FPU)
extern void init_VISWS_APIC_irqs(void);
extern void setup_IO_APIC(void);
extern void disable_IO_APIC(void);
-extern int IO_APIC_get_PCI_irq_vector(int bus, int slot, int fn);
+
+struct io_apic_irq_attr {
+ int ioapic;
+ int ioapic_pin;
+ int trigger;
+ int polarity;
+};
+
+static inline void set_io_apic_irq_attr(struct io_apic_irq_attr *irq_attr,
+ int ioapic, int ioapic_pin,
+ int trigger, int polarity)
+{
+ irq_attr->ioapic = ioapic;
+ irq_attr->ioapic_pin = ioapic_pin;
+ irq_attr->trigger = trigger;
+ irq_attr->polarity = polarity;
+}
+
+extern int IO_APIC_get_PCI_irq_vector(int bus, int devfn, int pin,
+ struct io_apic_irq_attr *irq_attr);
extern void setup_ioapic_dest(void);
extern void enable_IO_APIC(void);
/* SMP */
extern void smp_apic_timer_interrupt(struct pt_regs *);
extern void smp_spurious_interrupt(struct pt_regs *);
+extern void smp_generic_interrupt(struct pt_regs *);
extern void smp_error_interrupt(struct pt_regs *);
+#ifdef CONFIG_X86_IO_APIC
+extern asmlinkage void smp_irq_move_cleanup_interrupt(void);
+#endif
#ifdef CONFIG_SMP
extern void smp_reschedule_interrupt(struct pt_regs *);
extern void smp_call_function_interrupt(struct pt_regs *);
".previous\n"
_ASM_EXTABLE(1b, 3b)
: [err] "=r" (err)
-#if 0 /* See comment in __save_init_fpu() below. */
+#if 0 /* See comment in fxsave() below. */
: [fx] "r" (fx), "m" (*fx), "0" (0));
#else
: [fx] "cdaSDb" (fx), "m" (*fx), "0" (0));
return err;
}
-static inline int restore_fpu_checking(struct task_struct *tsk)
-{
- if (task_thread_info(tsk)->status & TS_XSAVE)
- return xrstor_checking(&tsk->thread.xstate->xsave);
- else
- return fxrstor_checking(&tsk->thread.xstate->fxsave);
-}
-
/* AMD CPUs don't save/restore FDP/FIP/FOP unless an exception
is pending. Clear the x87 state here by setting it to fixed
values. The kernel data segment can be sometimes 0 and sometimes
".previous\n"
_ASM_EXTABLE(1b, 3b)
: [err] "=r" (err), "=m" (*fx)
-#if 0 /* See comment in __fxsave_clear() below. */
+#if 0 /* See comment in fxsave() below. */
: [fx] "r" (fx), "0" (0));
#else
: [fx] "cdaSDb" (fx), "0" (0));
asm volatile("fnclex ; fwait");
}
-static inline void restore_fpu(struct task_struct *tsk)
+/* perform fxrstor iff the processor has extended states, otherwise frstor */
+static inline int fxrstor_checking(struct i387_fxsave_struct *fx)
{
- if (task_thread_info(tsk)->status & TS_XSAVE) {
- xrstor_checking(&tsk->thread.xstate->xsave);
- return;
- }
/*
* The "nop" is needed to make the instructions the same
* length.
"nop ; frstor %1",
"fxrstor %1",
X86_FEATURE_FXSR,
- "m" (tsk->thread.xstate->fxsave));
+ "m" (*fx));
+
+ return 0;
}
/* We need a safe address that is cheap to find and that is already
#endif /* CONFIG_X86_64 */
+static inline int restore_fpu_checking(struct task_struct *tsk)
+{
+ if (task_thread_info(tsk)->status & TS_XSAVE)
+ return xrstor_checking(&tsk->thread.xstate->xsave);
+ else
+ return fxrstor_checking(&tsk->thread.xstate->fxsave);
+}
+
/*
* Signal frame handlers...
*/
/*
* Some instructions like VIA's padlock instructions generate a spurious
* DNA fault but don't modify SSE registers. And these instructions
- * get used from interrupt context aswell. To prevent these kernel instructions
- * in interrupt context interact wrongly with other user/kernel fpu usage, we
+ * get used from interrupt context as well. To prevent these kernel instructions
+ * in interrupt context interacting wrongly with other user/kernel fpu usage, we
* should use them only in the context of irq_ts_save/restore()
*/
static inline int irq_ts_save(void)
{
/*
- * If we are in process context, we are ok to take a spurious DNA fault.
- * Otherwise, doing clts() in process context require pre-emption to
- * be disabled or some heavy lifting like kernel_fpu_begin()
+ * If in process context and not atomic, we can take a spurious DNA fault.
+ * Otherwise, doing clts() in process context requires disabling preemption
+ * or some heavy lifting like kernel_fpu_begin()
*/
- if (!in_interrupt())
+ if (!in_atomic())
return 0;
if (read_cr0() & X86_CR0_TS) {
extern void mask_8259A(void);
extern void unmask_8259A(void);
-#ifdef CONFIG_X86_32
-extern void init_ISA_irqs(void);
-#endif
-
#endif /* _ASM_X86_I8259_H */
extern int io_apic_get_unique_id(int ioapic, int apic_id);
extern int io_apic_get_version(int ioapic);
extern int io_apic_get_redir_entries(int ioapic);
-extern int io_apic_set_pci_routing(int ioapic, int pin, int irq,
- int edge_level, int active_high_low);
#endif /* CONFIG_ACPI */
+struct io_apic_irq_attr;
+extern int io_apic_set_pci_routing(struct device *dev, int irq,
+ struct io_apic_irq_attr *irq_attr);
extern int (*ioapic_renumber_irq)(int ioapic, int irq);
extern void ioapic_init_mappings(void);
-#ifdef CONFIG_X86_64
extern struct IO_APIC_route_entry **alloc_ioapic_entries(void);
extern void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries);
extern int save_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries);
extern void mask_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries);
extern int restore_IO_APIC_setup(struct IO_APIC_route_entry **ioapic_entries);
-extern void reinit_intr_remapped_IO_APIC(int intr_remapping,
- struct IO_APIC_route_entry **ioapic_entries);
-#endif
extern void probe_nr_irqs_gsi(void);
+#ifndef _ASM_X86_IOMAP_H
+#define _ASM_X86_IOMAP_H
+
/*
* Copyright © 2008 Ingo Molnar
*
void
iounmap_atomic(void *kvaddr, enum km_type type);
+
+#endif /* _ASM_X86_IOMAP_H */
#ifndef _ASM_X86_IRQ_REMAPPING_H
#define _ASM_X86_IRQ_REMAPPING_H
-#define IRTE_DEST(dest) ((x2apic) ? dest : dest << 8)
+#define IRTE_DEST(dest) ((x2apic_mode) ? dest : dest << 8)
#endif /* _ASM_X86_IRQ_REMAPPING_H */
#ifdef CONFIG_X86_32
# define SYSCALL_VECTOR 0x80
+# define IA32_SYSCALL_VECTOR 0x80
#else
# define IA32_SYSCALL_VECTOR 0x80
#endif
extern void k8_flush_garts(void);
extern int k8_scan_nodes(unsigned long start, unsigned long end);
+#ifdef CONFIG_K8_NB
+static inline struct pci_dev *node_to_k8_nb_misc(int node)
+{
+ return (node < num_k8_northbridges) ? k8_northbridges[node] : NULL;
+}
+#else
+static inline struct pci_dev *node_to_k8_nb_misc(int node)
+{
+ return NULL;
+}
+#endif
+
+
#endif /* _ASM_X86_K8_H */
struct device;
+enum ucode_state { UCODE_ERROR, UCODE_OK, UCODE_NFOUND };
+
struct microcode_ops {
- int (*request_microcode_user) (int cpu, const void __user *buf, size_t size);
- int (*request_microcode_fw) (int cpu, struct device *device);
+ enum ucode_state (*request_microcode_user) (int cpu,
+ const void __user *buf, size_t size);
- void (*apply_microcode) (int cpu);
+ enum ucode_state (*request_microcode_fw) (int cpu,
+ struct device *device);
- int (*collect_cpu_info) (int cpu, struct cpu_signature *csig);
void (*microcode_fini_cpu) (int cpu);
+
+ /*
+ * The generic 'microcode_core' part guarantees that
+ * the callbacks below run on a target cpu when they
+ * are being called.
+ * See also the "Synchronization" section in microcode_core.c.
+ */
+ int (*apply_microcode) (int cpu);
+ int (*collect_cpu_info) (int cpu, struct cpu_signature *csig);
};
struct ucode_cpu_info {
- struct cpu_signature cpu_sig;
- int valid;
- void *mc;
+ struct cpu_signature cpu_sig;
+ int valid;
+ void *mc;
};
extern struct ucode_cpu_info ucode_cpu_info[];
#ifdef CONFIG_X86_MPPARSE
extern void find_smp_config(void);
extern void early_reserve_e820_mpc_new(void);
+extern int enable_update_mptable;
#else
static inline void find_smp_config(void) { }
static inline void early_reserve_e820_mpc_new(void) { }
+#define enable_update_mptable 0
#endif
void __cpuinit generic_processor_info(int apicid, int version);
extern void mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger,
u32 gsi);
extern void mp_config_acpi_legacy_irqs(void);
-extern int mp_register_gsi(u32 gsi, int edge_level, int active_high_low);
+struct device;
+extern int mp_register_gsi(struct device *dev, u32 gsi, int edge_level,
+ int active_high_low);
extern int acpi_probe_gsi(void);
#ifdef CONFIG_X86_IO_APIC
-extern int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
- u32 gsi, int triggering, int polarity);
extern int mp_find_ioapic(int gsi);
extern int mp_find_ioapic_pin(int ioapic, int gsi);
-#else
-static inline int
-mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
- u32 gsi, int triggering, int polarity)
-{
- return 0;
-}
#endif
#else /* !CONFIG_ACPI: */
static inline int acpi_probe_gsi(void)
#define MSR_K8_TOP_MEM1 0xc001001a
#define MSR_K8_TOP_MEM2 0xc001001d
#define MSR_K8_SYSCFG 0xc0010010
-#define MSR_K8_HWCR 0xc0010015
#define MSR_K8_INT_PENDING_MSG 0xc0010055
/* C1E active bits in int pending message */
#define K8_INTP_C1E_ACTIVE_MASK 0x18000000
* but since they are power of two we could use a
* cheaper way --cvg
*/
- return nmi_watchdog & 0x3;
+ return nmi_watchdog & (NMI_LOCAL_APIC | NMI_IO_APIC);
}
#endif
extern void numa_init_array(void);
extern int numa_off;
-extern void srat_reserve_add_area(int nodeid);
-extern int hotadd_percent;
-
extern s16 apicid_to_node[MAX_LOCAL_APIC];
extern unsigned long numa_free_all_bootmem(void);
unsigned long end);
#ifdef CONFIG_NUMA
+/*
+ * Too small node sizes may confuse the VM badly. Usually they
+ * result from BIOS bugs. So dont recognize nodes as standalone
+ * NUMA entities that have less than this amount of RAM listed:
+ */
+#define NODE_MIN_SIZE (4*1024*1024)
+
extern void __init init_cpu_to_node(void);
extern void __cpuinit numa_set_node(int cpu, int node);
extern void __cpuinit numa_clear_node(int cpu);
extern int sysctl_legacy_va_layout;
extern void find_low_pfn_range(void);
-extern unsigned long init_memory_mapping(unsigned long start,
- unsigned long end);
-extern void initmem_init(unsigned long, unsigned long);
-extern void free_initmem(void);
extern void setup_bootmem_allocator(void);
#endif /* !__ASSEMBLY__ */
*/
#define __PAGE_OFFSET _AC(0xffff880000000000, UL)
-#define __PHYSICAL_START CONFIG_PHYSICAL_START
-#define __KERNEL_ALIGN 0x200000
-
-/*
- * Make sure kernel is aligned to 2MB address. Catching it at compile
- * time is better. Change your config file and compile the kernel
- * for a 2MB aligned address (CONFIG_PHYSICAL_START)
- */
-#if (CONFIG_PHYSICAL_START % __KERNEL_ALIGN) != 0
-#error "CONFIG_PHYSICAL_START must be a multiple of 2MB"
-#endif
+#define __PHYSICAL_START ((CONFIG_PHYSICAL_START + \
+ (CONFIG_PHYSICAL_ALIGN - 1)) & \
+ ~(CONFIG_PHYSICAL_ALIGN - 1))
#define __START_KERNEL (__START_KERNEL_map + __PHYSICAL_START)
#define __START_KERNEL_map _AC(0xffffffff80000000, UL)
-/* See Documentation/x86_64/mm.txt for a description of the memory map. */
+/* See Documentation/x86/x86_64/mm.txt for a description of the memory map. */
#define __PHYSICAL_MASK_SHIFT 46
#define __VIRTUAL_MASK_SHIFT 48
#define vmemmap ((struct page *)VMEMMAP_START)
-extern unsigned long init_memory_mapping(unsigned long start,
- unsigned long end);
-
-extern void initmem_init(unsigned long start_pfn, unsigned long end_pfn);
-extern void free_initmem(void);
-
extern void init_extra_mapping_uc(unsigned long phys, unsigned long size);
extern void init_extra_mapping_wb(unsigned long phys, unsigned long size);
extern unsigned long max_low_pfn_mapped;
extern unsigned long max_pfn_mapped;
+extern unsigned long init_memory_mapping(unsigned long start,
+ unsigned long end);
+
+extern void initmem_init(unsigned long start_pfn, unsigned long end_pfn);
+extern void free_initmem(void);
+
#endif /* !__ASSEMBLY__ */
#endif /* _ASM_X86_PAGE_DEFS_H */
#ifndef __ASSEMBLY__
+extern int direct_gbpages;
+
/* local pte updates need not use xchg for locking */
static inline pte_t native_local_ptep_get_and_clear(pte_t *ptep)
{
extern void paging_init(void);
-#endif /* !__ASSEMBLY__ */
-
-#ifndef __ASSEMBLY__
-
#define pte_ERROR(e) \
printk("%s:%d: bad pte %p(%016lx).\n", \
__FILE__, __LINE__, &(e), pte_val(e))
#define update_mmu_cache(vma, address, pte) do { } while (0)
-extern int direct_gbpages;
-
/* Encode and de-code a swap entry */
#if _PAGE_BIT_FILE < _PAGE_BIT_PROTNONE
#define SWP_TYPE_BITS (_PAGE_BIT_FILE - _PAGE_BIT_PRESENT - 1)
#define PGDIR_SIZE (_AC(1, UL) << PGDIR_SHIFT)
#define PGDIR_MASK (~(PGDIR_SIZE - 1))
-
+/* See Documentation/x86/x86_64/mm.txt for a description of the memory map. */
#define MAXMEM _AC(__AC(1, UL) << MAX_PHYSMEM_BITS, UL)
-#define VMALLOC_START _AC(0xffffc20000000000, UL)
-#define VMALLOC_END _AC(0xffffe1ffffffffff, UL)
-#define VMEMMAP_START _AC(0xffffe20000000000, UL)
+#define VMALLOC_START _AC(0xffffc90000000000, UL)
+#define VMALLOC_END _AC(0xffffe8ffffffffff, UL)
+#define VMEMMAP_START _AC(0xffffea0000000000, UL)
#define MODULES_VADDR _AC(0xffffffffa0000000, UL)
#define MODULES_END _AC(0xffffffffff000000, UL)
#define MODULES_LEN (MODULES_END - MODULES_VADDR)
extern pteval_t __supported_pte_mask;
extern int nx_enabled;
-extern void set_nx(void);
#define pgprot_writecombine pgprot_writecombine
extern pgprot_t pgprot_writecombine(pgprot_t prot);
extern struct cpuinfo_x86 new_cpu_data;
extern struct tss_struct doublefault_tss;
-extern __u32 cleared_cpu_caps[NCAPINTS];
+extern __u32 cpu_caps_cleared[NCAPINTS];
+extern __u32 cpu_caps_set[NCAPINTS];
#ifdef CONFIG_SMP
DECLARE_PER_CPU_SHARED_ALIGNED(struct cpuinfo_x86, cpu_info);
extern unsigned int xstate_size;
extern void free_thread_xstate(struct task_struct *);
extern struct kmem_cache *task_xstate_cachep;
-extern void init_scattered_cpuid_features(struct cpuinfo_x86 *c);
-extern unsigned int init_intel_cacheinfo(struct cpuinfo_x86 *c);
-extern unsigned short num_cache_leaves;
struct thread_struct {
/* Cached TLS descriptors: */
unsigned short fsindex;
unsigned short gsindex;
#endif
+#ifdef CONFIG_X86_32
unsigned long ip;
+#endif
+#ifdef CONFIG_X86_64
unsigned long fs;
+#endif
unsigned long gs;
/* Hardware debugging registers: */
unsigned long debugreg0;
/* Boot loader type from the setup header: */
extern int bootloader_type;
+extern int bootloader_version;
extern char ignore_fpu_irq;
.vm86_info = NULL, \
.sysenter_cs = __KERNEL_CS, \
.io_bitmap_ptr = NULL, \
- .fs = __KERNEL_PERCPU, \
}
/*
int (*setup_ioapic_ids)(void);
};
-extern void x86_quirk_pre_intr_init(void);
extern void x86_quirk_intr_init(void);
extern void x86_quirk_trap_init(void);
static inline int logical_smp_processor_id(void)
{
/* we don't want to mark this access volatile - bad code generation */
- return GET_APIC_LOGICAL_ID(*(u32 *)(APIC_BASE + APIC_LDR));
+ return GET_APIC_LOGICAL_ID(apic_read(APIC_LDR));
}
#endif
#else /* CONFIG_X86_32 */
# define SECTION_SIZE_BITS 27 /* matt - 128 is convenient right now */
# define MAX_PHYSADDR_BITS 44
-# define MAX_PHYSMEM_BITS 44 /* Can be max 45 bits */
+# define MAX_PHYSMEM_BITS 46
#endif
#endif /* CONFIG_SPARSEMEM */
/*
* syscalls.h - Linux syscall interfaces (arch-specific)
*
- * Copyright (c) 2008 Jaswinder Singh
+ * Copyright (c) 2008 Jaswinder Singh Rajput
*
* This file is released under the GPLv2.
* See the file COPYING for more details.
#include <linux/compiler.h>
#include <linux/linkage.h>
-#include <linux/types.h>
#include <linux/signal.h>
+#include <linux/types.h>
/* Common in X86_32 and X86_64 */
/* kernel/ioport.c */
asmlinkage long sys_ioperm(unsigned long, unsigned long, int);
+/* kernel/process.c */
+int sys_fork(struct pt_regs *);
+int sys_vfork(struct pt_regs *);
+
/* kernel/ldt.c */
asmlinkage int sys_modify_ldt(int, void __user *, unsigned long);
+/* kernel/signal.c */
+long sys_rt_sigreturn(struct pt_regs *);
+
/* kernel/tls.c */
asmlinkage int sys_set_thread_area(struct user_desc __user *);
asmlinkage int sys_get_thread_area(struct user_desc __user *);
/* X86_32 only */
#ifdef CONFIG_X86_32
+/* kernel/ioport.c */
+long sys_iopl(struct pt_regs *);
+
/* kernel/process_32.c */
-int sys_fork(struct pt_regs *);
int sys_clone(struct pt_regs *);
-int sys_vfork(struct pt_regs *);
int sys_execve(struct pt_regs *);
-/* kernel/signal_32.c */
+/* kernel/signal.c */
asmlinkage int sys_sigsuspend(int, int, old_sigset_t);
asmlinkage int sys_sigaction(int, const struct old_sigaction __user *,
struct old_sigaction __user *);
int sys_sigaltstack(struct pt_regs *);
unsigned long sys_sigreturn(struct pt_regs *);
-long sys_rt_sigreturn(struct pt_regs *);
-
-/* kernel/ioport.c */
-long sys_iopl(struct pt_regs *);
/* kernel/sys_i386_32.c */
+struct mmap_arg_struct;
+struct sel_arg_struct;
+struct oldold_utsname;
+struct old_utsname;
+
asmlinkage long sys_mmap2(unsigned long, unsigned long, unsigned long,
unsigned long, unsigned long, unsigned long);
-struct mmap_arg_struct;
asmlinkage int old_mmap(struct mmap_arg_struct __user *);
-struct sel_arg_struct;
asmlinkage int old_select(struct sel_arg_struct __user *);
asmlinkage int sys_ipc(uint, int, int, int, void __user *, long);
-struct old_utsname;
asmlinkage int sys_uname(struct old_utsname __user *);
-struct oldold_utsname;
asmlinkage int sys_olduname(struct oldold_utsname __user *);
/* kernel/vm86_32.c */
#else /* CONFIG_X86_32 */
/* X86_64 only */
+/* kernel/ioport.c */
+asmlinkage long sys_iopl(unsigned int, struct pt_regs *);
+
/* kernel/process_64.c */
-asmlinkage long sys_fork(struct pt_regs *);
asmlinkage long sys_clone(unsigned long, unsigned long,
void __user *, void __user *,
struct pt_regs *);
-asmlinkage long sys_vfork(struct pt_regs *);
asmlinkage long sys_execve(char __user *, char __user * __user *,
char __user * __user *,
struct pt_regs *);
long sys_arch_prctl(int, unsigned long);
-/* kernel/ioport.c */
-asmlinkage long sys_iopl(unsigned int, struct pt_regs *);
-
-/* kernel/signal_64.c */
+/* kernel/signal.c */
asmlinkage long sys_sigaltstack(const stack_t __user *, stack_t __user *,
struct pt_regs *);
-long sys_rt_sigreturn(struct pt_regs *);
/* kernel/sys_x86_64.c */
+struct new_utsname;
+
asmlinkage long sys_mmap(unsigned long, unsigned long, unsigned long,
unsigned long, unsigned long, unsigned long);
-struct new_utsname;
asmlinkage long sys_uname(struct new_utsname __user *);
#endif /* CONFIG_X86_32 */
void x86_pci_root_bus_res_quirks(struct pci_bus *b);
#ifdef CONFIG_SMP
-#define mc_capable() (cpumask_weight(cpu_core_mask(0)) != nr_cpu_ids)
+#define mc_capable() ((boot_cpu_data.x86_max_cores > 1) && \
+ (cpumask_weight(cpu_core_mask(0)) != nr_cpu_ids))
#define smt_capable() (smp_num_siblings > 1)
#endif
#define _ASM_X86_TRAPS_H
#include <asm/debugreg.h>
+#include <asm/siginfo.h> /* TRAP_TRACE, ... */
#ifdef CONFIG_X86_32
#define dotraplinkage
}
extern int panic_on_unrecovered_nmi;
-extern int kstack_depth_to_print;
void math_error(void __user *);
void math_emulate(struct math_emu_info *);
#define UV_CPUS_PER_ACT_STATUS 32
#define UV_ACT_STATUS_MASK 0x3
#define UV_ACT_STATUS_SIZE 2
-#define UV_ACTIVATION_DESCRIPTOR_SIZE 32
+#define UV_ADP_SIZE 32
#define UV_DISTRIBUTION_SIZE 256
#define UV_SW_ACK_NPENDING 8
#define UV_NET_ENDPOINT_INTD 0x38
struct uv_hub_info_s {
unsigned long global_mmr_base;
unsigned long gpa_mask;
+ unsigned int gnode_extra;
unsigned long gnode_upper;
unsigned long lowmem_remap_top;
unsigned long lowmem_remap_base;
* p - PNODE (local part of nsids, right shifted 1)
*/
#define UV_NASID_TO_PNODE(n) (((n) >> 1) & uv_hub_info->pnode_mask)
-#define UV_PNODE_TO_NASID(p) (((p) << 1) | uv_hub_info->gnode_upper)
+#define UV_PNODE_TO_GNODE(p) ((p) |uv_hub_info->gnode_extra)
+#define UV_PNODE_TO_NASID(p) (UV_PNODE_TO_GNODE(p) << 1)
#define UV_LOCAL_MMR_BASE 0xf4000000UL
#define UV_GLOBAL_MMR32_BASE 0xf8000000UL
#define UV_GLOBAL_MMR32_PNODE_BITS(p) ((p) << (UV_GLOBAL_MMR32_PNODE_SHIFT))
#define UV_GLOBAL_MMR64_PNODE_BITS(p) \
- ((unsigned long)(p) << UV_GLOBAL_MMR64_PNODE_SHIFT)
+ ((unsigned long)(UV_PNODE_TO_GNODE(p)) << UV_GLOBAL_MMR64_PNODE_SHIFT)
#define UV_APIC_PNODE_SHIFT 6
obj-y := process_$(BITS).o signal.o entry_$(BITS).o
obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
obj-y += time_$(BITS).o ioport.o ldt.o dumpstack.o
-obj-y += setup.o i8259.o irqinit_$(BITS).o
+obj-y += setup.o i8259.o irqinit.o
obj-$(CONFIG_X86_VISWS) += visws_quirks.o
obj-$(CONFIG_X86_32) += probe_roms_32.o
obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o
#include <linux/irq.h>
#include <linux/bootmem.h>
#include <linux/ioport.h>
+#include <linux/pci.h>
#include <asm/pgtable.h>
#include <asm/io_apic.h>
* success: return IRQ number (>=0)
* failure: return < 0
*/
-int acpi_register_gsi(u32 gsi, int triggering, int polarity)
+int acpi_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
{
unsigned int irq;
unsigned int plat_gsi = gsi;
* Make sure all (legacy) PCI IRQs are set as level-triggered.
*/
if (acpi_irq_model == ACPI_IRQ_MODEL_PIC) {
- if (triggering == ACPI_LEVEL_SENSITIVE)
+ if (trigger == ACPI_LEVEL_SENSITIVE)
eisa_set_level_irq(gsi);
}
#endif
#ifdef CONFIG_X86_IO_APIC
if (acpi_irq_model == ACPI_IRQ_MODEL_IOAPIC) {
- plat_gsi = mp_register_gsi(gsi, triggering, polarity);
+ plat_gsi = mp_register_gsi(dev, gsi, trigger, polarity);
}
#endif
acpi_gsi_to_irq(plat_gsi, &irq);
#endif
static struct {
- int apic_id;
int gsi_base;
int gsi_end;
- DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
} mp_ioapic_routing[MAX_IO_APICS];
int mp_find_ioapic(int gsi)
set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address);
mp_ioapics[idx].apicid = uniq_ioapic_id(id);
-#ifdef CONFIG_X86_32
mp_ioapics[idx].apicver = io_apic_get_version(idx);
-#else
- mp_ioapics[idx].apicver = 0;
-#endif
+
/*
* Build basic GSI lookup table to facilitate gsi->io_apic lookups
* and to prevent reprogramming of IOAPIC pins (PCI GSIs).
*/
- mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].apicid;
mp_ioapic_routing[idx].gsi_base = gsi_base;
mp_ioapic_routing[idx].gsi_end = gsi_base +
io_apic_get_redir_entries(idx);
}
}
-int mp_register_gsi(u32 gsi, int triggering, int polarity)
+static int mp_config_acpi_gsi(struct device *dev, u32 gsi, int trigger,
+ int polarity)
{
+#ifdef CONFIG_X86_MPPARSE
+ struct mpc_intsrc mp_irq;
+ struct pci_dev *pdev;
+ unsigned char number;
+ unsigned int devfn;
int ioapic;
- int ioapic_pin;
-#ifdef CONFIG_X86_32
-#define MAX_GSI_NUM 4096
-#define IRQ_COMPRESSION_START 64
+ u8 pin;
- static int pci_irq = IRQ_COMPRESSION_START;
- /*
- * Mapping between Global System Interrupts, which
- * represent all possible interrupts, and IRQs
- * assigned to actual devices.
- */
- static int gsi_to_irq[MAX_GSI_NUM];
-#else
+ if (!acpi_ioapic)
+ return 0;
+ if (!dev)
+ return 0;
+ if (dev->bus != &pci_bus_type)
+ return 0;
+
+ pdev = to_pci_dev(dev);
+ number = pdev->bus->number;
+ devfn = pdev->devfn;
+ pin = pdev->pin;
+ /* print the entry should happen on mptable identically */
+ mp_irq.type = MP_INTSRC;
+ mp_irq.irqtype = mp_INT;
+ mp_irq.irqflag = (trigger == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
+ (polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
+ mp_irq.srcbus = number;
+ mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
+ ioapic = mp_find_ioapic(gsi);
+ mp_irq.dstapic = mp_ioapics[ioapic].apicid;
+ mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
+
+ save_mp_irq(&mp_irq);
+#endif
+ return 0;
+}
+
+int mp_register_gsi(struct device *dev, u32 gsi, int trigger, int polarity)
+{
+ int ioapic;
+ int ioapic_pin;
+ struct io_apic_irq_attr irq_attr;
if (acpi_irq_model != ACPI_IRQ_MODEL_IOAPIC)
return gsi;
-#endif
/* Don't set up the ACPI SCI because it's already set up */
if (acpi_gbl_FADT.sci_interrupt == gsi)
gsi = ioapic_renumber_irq(ioapic, gsi);
#endif
- /*
- * Avoid pin reprogramming. PRTs typically include entries
- * with redundant pin->gsi mappings (but unique PCI devices);
- * we only program the IOAPIC on the first.
- */
if (ioapic_pin > MP_MAX_IOAPIC_PIN) {
printk(KERN_ERR "Invalid reference to IOAPIC pin "
- "%d-%d\n", mp_ioapic_routing[ioapic].apic_id,
+ "%d-%d\n", mp_ioapics[ioapic].apicid,
ioapic_pin);
return gsi;
}
- if (test_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed)) {
- pr_debug("Pin %d-%d already programmed\n",
- mp_ioapic_routing[ioapic].apic_id, ioapic_pin);
-#ifdef CONFIG_X86_32
- return (gsi < IRQ_COMPRESSION_START ? gsi : gsi_to_irq[gsi]);
-#else
- return gsi;
-#endif
- }
-
- set_bit(ioapic_pin, mp_ioapic_routing[ioapic].pin_programmed);
-#ifdef CONFIG_X86_32
- /*
- * For GSI >= 64, use IRQ compression
- */
- if ((gsi >= IRQ_COMPRESSION_START)
- && (triggering == ACPI_LEVEL_SENSITIVE)) {
- /*
- * For PCI devices assign IRQs in order, avoiding gaps
- * due to unused I/O APIC pins.
- */
- int irq = gsi;
- if (gsi < MAX_GSI_NUM) {
- /*
- * Retain the VIA chipset work-around (gsi > 15), but
- * avoid a problem where the 8254 timer (IRQ0) is setup
- * via an override (so it's not on pin 0 of the ioapic),
- * and at the same time, the pin 0 interrupt is a PCI
- * type. The gsi > 15 test could cause these two pins
- * to be shared as IRQ0, and they are not shareable.
- * So test for this condition, and if necessary, avoid
- * the pin collision.
- */
- gsi = pci_irq++;
- /*
- * Don't assign IRQ used by ACPI SCI
- */
- if (gsi == acpi_gbl_FADT.sci_interrupt)
- gsi = pci_irq++;
- gsi_to_irq[irq] = gsi;
- } else {
- printk(KERN_ERR "GSI %u is too high\n", gsi);
- return gsi;
- }
- }
-#endif
- io_apic_set_pci_routing(ioapic, ioapic_pin, gsi,
- triggering == ACPI_EDGE_SENSITIVE ? 0 : 1,
- polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
- return gsi;
-}
-int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin,
- u32 gsi, int triggering, int polarity)
-{
-#ifdef CONFIG_X86_MPPARSE
- struct mpc_intsrc mp_irq;
- int ioapic;
+ if (enable_update_mptable)
+ mp_config_acpi_gsi(dev, gsi, trigger, polarity);
- if (!acpi_ioapic)
- return 0;
+ set_io_apic_irq_attr(&irq_attr, ioapic, ioapic_pin,
+ trigger == ACPI_EDGE_SENSITIVE ? 0 : 1,
+ polarity == ACPI_ACTIVE_HIGH ? 0 : 1);
+ io_apic_set_pci_routing(dev, gsi, &irq_attr);
- /* print the entry should happen on mptable identically */
- mp_irq.type = MP_INTSRC;
- mp_irq.irqtype = mp_INT;
- mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) |
- (polarity == ACPI_ACTIVE_HIGH ? 1 : 3);
- mp_irq.srcbus = number;
- mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3);
- ioapic = mp_find_ioapic(gsi);
- mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id;
- mp_irq.dstirq = mp_find_ioapic_pin(ioapic, gsi);
-
- save_mp_irq(&mp_irq);
-#endif
- return 0;
+ return gsi;
}
/*
always := wakeup.bin
targets := wakeup.elf wakeup.lds
-wakeup-y += wakeup.o wakemain.o video-mode.o copy.o
+wakeup-y += wakeup.o wakemain.o video-mode.o copy.o bioscall.o regs.o
# The link order of the video-*.o modules can matter. In particular,
# video-vga.o *must* be listed first, followed by video-vesa.o.
--- /dev/null
+#include "../../../boot/bioscall.S"
--- /dev/null
+#include "../../../boot/regs.c"
/* Local APIC was disabled by the BIOS and enabled by the kernel */
static int enabled_via_apicbase;
+/*
+ * Handle interrupt mode configuration register (IMCR).
+ * This register controls whether the interrupt signals
+ * that reach the BSP come from the master PIC or from the
+ * local APIC. Before entering Symmetric I/O Mode, either
+ * the BIOS or the operating system must switch out of
+ * PIC Mode by changing the IMCR.
+ */
+static inline void imcr_pic_to_apic(void)
+{
+ /* select IMCR register */
+ outb(0x70, 0x22);
+ /* NMI and 8259 INTR go through APIC */
+ outb(0x01, 0x23);
+}
+
+static inline void imcr_apic_to_pic(void)
+{
+ /* select IMCR register */
+ outb(0x70, 0x22);
+ /* NMI and 8259 INTR go directly to BSP */
+ outb(0x00, 0x23);
+}
#endif
#ifdef CONFIG_X86_64
__setup("apicpmtimer", setup_apicpmtimer);
#endif
+int x2apic_mode;
#ifdef CONFIG_X86_X2APIC
-int x2apic;
/* x2apic enabled before OS handover */
static int x2apic_preenabled;
static int disable_x2apic;
static __init int setup_nox2apic(char *str)
{
+ if (x2apic_enabled()) {
+ pr_warning("Bios already enabled x2apic, "
+ "can't enforce nox2apic");
+ return 0;
+ }
+
disable_x2apic = 1;
setup_clear_cpu_cap(X86_FEATURE_X2APIC);
return 0;
return lapic_get_version() >= 0x14;
}
+/*
+ * bare function to substitute write operation
+ * and it's _that_ fast :)
+ */
+static void native_apic_write_dummy(u32 reg, u32 v)
+{
+ WARN_ON_ONCE((cpu_has_apic || !disable_apic));
+}
+
+static u32 native_apic_read_dummy(u32 reg)
+{
+ WARN_ON_ONCE((cpu_has_apic && !disable_apic));
+ return 0;
+}
+
+/*
+ * right after this call apic->write/read doesn't do anything
+ * note that there is no restore operation it works one way
+ */
+void apic_disable(void)
+{
+ apic->read = native_apic_read_dummy;
+ apic->write = native_apic_write_dummy;
+}
+
void native_apic_wait_icr_idle(void)
{
while (apic_read(APIC_ICR) & APIC_ICR_BUSY)
static void setup_APIC_eilvt(u8 lvt_off, u8 vector, u8 msg_type, u8 mask)
{
- unsigned long reg = (lvt_off << 4) + APIC_EILVT0;
+ unsigned long reg = (lvt_off << 4) + APIC_EILVTn(0);
unsigned int v = (mask << 16) | (msg_type << 8) | vector;
apic_write(reg, v);
u32 v;
/* APIC hasn't been mapped yet */
- if (!x2apic && !apic_phys)
+ if (!x2apic_mode && !apic_phys)
return;
maxlvt = lapic_get_maxlvt();
{
if (x2apic_enabled()) {
pr_info("x2apic enabled by BIOS, switching to x2apic ops\n");
- x2apic_preenabled = x2apic = 1;
+ x2apic_preenabled = x2apic_mode = 1;
}
}
{
int msr, msr2;
- if (!x2apic)
+ if (!x2apic_mode)
return;
rdmsr(MSR_IA32_APICBASE, msr, msr2);
wrmsr(MSR_IA32_APICBASE, msr | X2APIC_ENABLE, 0);
}
}
+#endif /* CONFIG_X86_X2APIC */
void __init enable_IR_x2apic(void)
{
unsigned long flags;
struct IO_APIC_route_entry **ioapic_entries = NULL;
- if (!cpu_has_x2apic)
- return;
-
- if (!x2apic_preenabled && disable_x2apic) {
- pr_info("Skipped enabling x2apic and Interrupt-remapping "
- "because of nox2apic\n");
- return;
+ ret = dmar_table_init();
+ if (ret) {
+ pr_debug("dmar_table_init() failed with %d:\n", ret);
+ goto ir_failed;
}
- if (x2apic_preenabled && disable_x2apic)
- panic("Bios already enabled x2apic, can't enforce nox2apic");
-
- if (!x2apic_preenabled && skip_ioapic_setup) {
- pr_info("Skipped enabling x2apic and Interrupt-remapping "
- "because of skipping io-apic setup\n");
- return;
+ if (!intr_remapping_supported()) {
+ pr_debug("intr-remapping not supported\n");
+ goto ir_failed;
}
- ret = dmar_table_init();
- if (ret) {
- pr_info("dmar_table_init() failed with %d:\n", ret);
- if (x2apic_preenabled)
- panic("x2apic enabled by bios. But IR enabling failed");
- else
- pr_info("Not enabling x2apic,Intr-remapping\n");
+ if (!x2apic_preenabled && skip_ioapic_setup) {
+ pr_info("Skipped enabling intr-remap because of skipping "
+ "io-apic setup\n");
return;
}
mask_IO_APIC_setup(ioapic_entries);
mask_8259A();
- ret = enable_intr_remapping(EIM_32BIT_APIC_ID);
-
- if (ret && x2apic_preenabled) {
- local_irq_restore(flags);
- panic("x2apic enabled by bios. But IR enabling failed");
- }
-
+ ret = enable_intr_remapping(x2apic_supported());
if (ret)
goto end_restore;
- if (!x2apic) {
- x2apic = 1;
+ pr_info("Enabled Interrupt-remapping\n");
+
+ if (x2apic_supported() && !x2apic_mode) {
+ x2apic_mode = 1;
enable_x2apic();
+ pr_info("Enabled x2apic\n");
}
end_restore:
* IR enabling failed
*/
restore_IO_APIC_setup(ioapic_entries);
- else
- reinit_intr_remapped_IO_APIC(x2apic_preenabled, ioapic_entries);
unmask_8259A();
local_irq_restore(flags);
end:
- if (!ret) {
- if (!x2apic_preenabled)
- pr_info("Enabled x2apic and interrupt-remapping\n");
- else
- pr_info("Enabled Interrupt-remapping\n");
- } else
- pr_err("Failed to enable Interrupt-remapping and x2apic\n");
if (ioapic_entries)
free_ioapic_entries(ioapic_entries);
+
+ if (!ret)
+ return;
+
+ir_failed:
+ if (x2apic_preenabled)
+ panic("x2apic enabled by bios. But IR enabling failed");
+ else if (cpu_has_x2apic)
+ pr_info("Not enabling x2apic,Intr-remapping\n");
#else
if (!cpu_has_x2apic)
return;
if (x2apic_preenabled)
panic("x2apic enabled prior OS handover,"
- " enable CONFIG_INTR_REMAP");
-
- pr_info("Enable CONFIG_INTR_REMAP for enabling intr-remapping "
- " and x2apic\n");
+ " enable CONFIG_X86_X2APIC, CONFIG_INTR_REMAP");
#endif
return;
}
-#endif /* CONFIG_X86_X2APIC */
+
#ifdef CONFIG_X86_64
/*
}
mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
- boot_cpu_physical_apicid = 0;
return 0;
}
#else
*/
void __init init_apic_mappings(void)
{
- if (x2apic) {
+ unsigned int new_apicid;
+
+ if (x2apic_mode) {
boot_cpu_physical_apicid = read_apic_id();
return;
}
- /*
- * If no local APIC can be found then set up a fake all
- * zeroes page to simulate the local APIC and another
- * one for the IO-APIC.
- */
+ /* If no local APIC can be found return early */
if (!smp_found_config && detect_init_APIC()) {
- apic_phys = (unsigned long) alloc_bootmem_pages(PAGE_SIZE);
- apic_phys = __pa(apic_phys);
- } else
+ /* lets NOP'ify apic operations */
+ pr_info("APIC: disable apic facility\n");
+ apic_disable();
+ } else {
apic_phys = mp_lapic_addr;
- set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
- apic_printk(APIC_VERBOSE, "mapped APIC to %08lx (%08lx)\n",
- APIC_BASE, apic_phys);
+ /*
+ * acpi lapic path already maps that address in
+ * acpi_register_lapic_address()
+ */
+ if (!acpi_lapic)
+ set_fixmap_nocache(FIX_APIC_BASE, apic_phys);
+
+ apic_printk(APIC_VERBOSE, "mapped APIC to %08lx (%08lx)\n",
+ APIC_BASE, apic_phys);
+ }
/*
* Fetch the APIC ID of the BSP in case we have a
* default configuration (or the MP table is broken).
*/
- if (boot_cpu_physical_apicid == -1U)
- boot_cpu_physical_apicid = read_apic_id();
+ new_apicid = read_apic_id();
+ if (boot_cpu_physical_apicid != new_apicid) {
+ boot_cpu_physical_apicid = new_apicid;
+ /*
+ * yeah -- we lie about apic_version
+ * in case if apic was disabled via boot option
+ * but it's not a problem for SMP compiled kernel
+ * since smp_sanity_check is prepared for such a case
+ * and disable smp mode
+ */
+ apic_version[new_apicid] =
+ GET_APIC_VERSION(apic_read(APIC_LVR));
+ }
}
/*
*/
apic_printk(APIC_VERBOSE, "leaving PIC mode, "
"enabling APIC mode.\n");
- outb(0x70, 0x22);
- outb(0x01, 0x23);
+ imcr_pic_to_apic();
}
#endif
if (apic->enable_apic_mode)
*/
apic_printk(APIC_VERBOSE, "disabling APIC mode, "
"entering PIC mode.\n");
- outb(0x70, 0x22);
- outb(0x00, 0x23);
+ imcr_apic_to_pic();
return;
}
#endif
local_irq_save(flags);
disable_local_APIC();
-#ifdef CONFIG_INTR_REMAP
+
if (intr_remapping_enabled)
disable_intr_remapping();
-#endif
+
local_irq_restore(flags);
return 0;
}
unsigned int l, h;
unsigned long flags;
int maxlvt;
-
-#ifdef CONFIG_INTR_REMAP
- int ret;
+ int ret = 0;
struct IO_APIC_route_entry **ioapic_entries = NULL;
if (!apic_pm_state.active)
return 0;
local_irq_save(flags);
- if (x2apic) {
+ if (intr_remapping_enabled) {
ioapic_entries = alloc_ioapic_entries();
if (!ioapic_entries) {
WARN(1, "Alloc ioapic_entries in lapic resume failed.");
- return -ENOMEM;
+ ret = -ENOMEM;
+ goto restore;
}
ret = save_IO_APIC_setup(ioapic_entries);
if (ret) {
WARN(1, "Saving IO-APIC state failed: %d\n", ret);
free_ioapic_entries(ioapic_entries);
- return ret;
+ goto restore;
}
mask_IO_APIC_setup(ioapic_entries);
mask_8259A();
- enable_x2apic();
}
-#else
- if (!apic_pm_state.active)
- return 0;
- local_irq_save(flags);
- if (x2apic)
+ if (x2apic_mode)
enable_x2apic();
-#endif
-
else {
/*
* Make sure the APICBASE points to the right address
apic_write(APIC_ESR, 0);
apic_read(APIC_ESR);
-#ifdef CONFIG_INTR_REMAP
- if (intr_remapping_enabled)
- reenable_intr_remapping(EIM_32BIT_APIC_ID);
-
- if (x2apic) {
+ if (intr_remapping_enabled) {
+ reenable_intr_remapping(x2apic_mode);
unmask_8259A();
restore_IO_APIC_setup(ioapic_entries);
free_ioapic_entries(ioapic_entries);
}
-#endif
-
+restore:
local_irq_restore(flags);
-
- return 0;
+ return ret;
}
/*
#endif /* CONFIG_PM */
#ifdef CONFIG_X86_64
-/*
- * apic_is_clustered_box() -- Check if we can expect good TSC
- *
- * Thus far, the major user of this is IBM's Summit2 series:
- *
- * Clustered boxes may have unsynced TSC problems if they are
- * multi-chassis. Use available data to take a good guess.
- * If in doubt, go HPET.
- */
-__cpuinit int apic_is_clustered_box(void)
+
+static int __cpuinit apic_cluster_num(void)
{
int i, clusters, zeros;
unsigned id;
u16 *bios_cpu_apicid;
DECLARE_BITMAP(clustermap, NUM_APIC_CLUSTERS);
- /*
- * there is not this kind of box with AMD CPU yet.
- * Some AMD box with quadcore cpu and 8 sockets apicid
- * will be [4, 0x23] or [8, 0x27] could be thought to
- * vsmp box still need checking...
- */
- if ((boot_cpu_data.x86_vendor == X86_VENDOR_AMD) && !is_vsmp_box())
- return 0;
-
bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid);
bitmap_zero(clustermap, NUM_APIC_CLUSTERS);
++zeros;
}
- /* ScaleMP vSMPowered boxes have one cluster per board and TSCs are
- * not guaranteed to be synced between boards
- */
- if (is_vsmp_box() && clusters > 1)
+ return clusters;
+}
+
+static int __cpuinitdata multi_checked;
+static int __cpuinitdata multi;
+
+static int __cpuinit set_multi(const struct dmi_system_id *d)
+{
+ if (multi)
+ return 0;
+ pr_info("APIC: %s detected, Multi Chassis\n", d->ident);
+ multi = 1;
+ return 0;
+}
+
+static const __cpuinitconst struct dmi_system_id multi_dmi_table[] = {
+ {
+ .callback = set_multi,
+ .ident = "IBM System Summit2",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "IBM"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Summit2"),
+ },
+ },
+ {}
+};
+
+static void __cpuinit dmi_check_multi(void)
+{
+ if (multi_checked)
+ return;
+
+ dmi_check_system(multi_dmi_table);
+ multi_checked = 1;
+}
+
+/*
+ * apic_is_clustered_box() -- Check if we can expect good TSC
+ *
+ * Thus far, the major user of this is IBM's Summit2 series:
+ * Clustered boxes may have unsynced TSC problems if they are
+ * multi-chassis.
+ * Use DMI to check them
+ */
+__cpuinit int apic_is_clustered_box(void)
+{
+ dmi_check_multi();
+ if (multi)
return 1;
+ if (!is_vsmp_box())
+ return 0;
+
/*
- * If clusters > 2, then should be multi-chassis.
- * May have to revisit this when multi-core + hyperthreaded CPUs come
- * out, but AFAIK this will work even for them.
+ * ScaleMP vSMPowered boxes have one cluster per board and TSCs are
+ * not guaranteed to be synced between boards
*/
- return (clusters > 2);
+ if (apic_cluster_num() > 1)
+ return 1;
+
+ return 0;
}
#endif
static int flat_phys_pkg_id(int initial_apic_id, int index_msb)
{
- return hard_smp_processor_id() >> index_msb;
+ return initial_apic_id >> index_msb;
}
struct apic apic_flat = {
* regardless of how many processors are present (x86_64 ES7000
* is an example).
*/
- if (acpi_gbl_FADT.header.revision > FADT2_REVISION_ID &&
+ if (acpi_gbl_FADT.header.revision >= FADT2_REVISION_ID &&
(acpi_gbl_FADT.flags & ACPI_FADT_APIC_PHYSICAL)) {
printk(KERN_DEBUG "system APIC only can use physical flat");
return 1;
return gsi;
}
-static int wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip)
+static int __cpuinit wakeup_secondary_cpu_via_mip(int cpu, unsigned long eip)
{
unsigned long vect = 0, psaival = 0;
#include <asm/setup.h>
#include <asm/irq_remapping.h>
#include <asm/hpet.h>
+#include <asm/hw_irq.h>
#include <asm/uv/uv_hub.h>
#include <asm/uv/uv_irq.h>
struct irq_pin_list *next;
};
-static struct irq_pin_list *get_one_free_irq_2_pin(int cpu)
+static struct irq_pin_list *get_one_free_irq_2_pin(int node)
{
struct irq_pin_list *pin;
- int node;
-
- node = cpu_to_node(cpu);
pin = kzalloc_node(sizeof(*pin), GFP_ATOMIC, node);
unsigned move_cleanup_count;
u8 vector;
u8 move_in_progress : 1;
-#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
- u8 move_desc_pending : 1;
-#endif
};
/* irq_cfg is indexed by the sum of all RTEs in all I/O APICs. */
return cfg;
}
-static struct irq_cfg *get_one_free_irq_cfg(int cpu)
+static struct irq_cfg *get_one_free_irq_cfg(int node)
{
struct irq_cfg *cfg;
- int node;
-
- node = cpu_to_node(cpu);
cfg = kzalloc_node(sizeof(*cfg), GFP_ATOMIC, node);
if (cfg) {
return cfg;
}
-int arch_init_chip_data(struct irq_desc *desc, int cpu)
+int arch_init_chip_data(struct irq_desc *desc, int node)
{
struct irq_cfg *cfg;
cfg = desc->chip_data;
if (!cfg) {
- desc->chip_data = get_one_free_irq_cfg(cpu);
+ desc->chip_data = get_one_free_irq_cfg(node);
if (!desc->chip_data) {
printk(KERN_ERR "can not alloc irq_cfg\n");
BUG_ON(1);
return 0;
}
-#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
-
+/* for move_irq_desc */
static void
-init_copy_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg, int cpu)
+init_copy_irq_2_pin(struct irq_cfg *old_cfg, struct irq_cfg *cfg, int node)
{
struct irq_pin_list *old_entry, *head, *tail, *entry;
if (!old_entry)
return;
- entry = get_one_free_irq_2_pin(cpu);
+ entry = get_one_free_irq_2_pin(node);
if (!entry)
return;
tail = entry;
old_entry = old_entry->next;
while (old_entry) {
- entry = get_one_free_irq_2_pin(cpu);
+ entry = get_one_free_irq_2_pin(node);
if (!entry) {
entry = head;
while (entry) {
}
void arch_init_copy_chip_data(struct irq_desc *old_desc,
- struct irq_desc *desc, int cpu)
+ struct irq_desc *desc, int node)
{
struct irq_cfg *cfg;
struct irq_cfg *old_cfg;
- cfg = get_one_free_irq_cfg(cpu);
+ cfg = get_one_free_irq_cfg(node);
if (!cfg)
return;
memcpy(cfg, old_cfg, sizeof(struct irq_cfg));
- init_copy_irq_2_pin(old_cfg, cfg, cpu);
+ init_copy_irq_2_pin(old_cfg, cfg, node);
}
static void free_irq_cfg(struct irq_cfg *old_cfg)
old_desc->chip_data = NULL;
}
}
-
-static void
-set_extra_move_desc(struct irq_desc *desc, const struct cpumask *mask)
-{
- struct irq_cfg *cfg = desc->chip_data;
-
- if (!cfg->move_in_progress) {
- /* it means that domain is not changed */
- if (!cpumask_intersects(desc->affinity, mask))
- cfg->move_desc_pending = 1;
- }
-}
-#endif
+/* end for move_irq_desc */
#else
static struct irq_cfg *irq_cfg(unsigned int irq)
#endif
-#ifndef CONFIG_NUMA_MIGRATE_IRQ_DESC
-static inline void
-set_extra_move_desc(struct irq_desc *desc, const struct cpumask *mask)
-{
-}
-#endif
-
struct io_apic {
unsigned int index;
unsigned int unused[3];
spin_unlock_irqrestore(&ioapic_lock, flags);
}
-#ifdef CONFIG_SMP
-static void send_cleanup_vector(struct irq_cfg *cfg)
-{
- cpumask_var_t cleanup_mask;
-
- if (unlikely(!alloc_cpumask_var(&cleanup_mask, GFP_ATOMIC))) {
- unsigned int i;
- cfg->move_cleanup_count = 0;
- for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
- cfg->move_cleanup_count++;
- for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
- apic->send_IPI_mask(cpumask_of(i), IRQ_MOVE_CLEANUP_VECTOR);
- } else {
- cpumask_and(cleanup_mask, cfg->old_domain, cpu_online_mask);
- cfg->move_cleanup_count = cpumask_weight(cleanup_mask);
- apic->send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
- free_cpumask_var(cleanup_mask);
- }
- cfg->move_in_progress = 0;
-}
-
-static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq_cfg *cfg)
-{
- int apic, pin;
- struct irq_pin_list *entry;
- u8 vector = cfg->vector;
-
- entry = cfg->irq_2_pin;
- for (;;) {
- unsigned int reg;
-
- if (!entry)
- break;
-
- apic = entry->apic;
- pin = entry->pin;
- /*
- * With interrupt-remapping, destination information comes
- * from interrupt-remapping table entry.
- */
- if (!irq_remapped(irq))
- io_apic_write(apic, 0x11 + pin*2, dest);
- reg = io_apic_read(apic, 0x10 + pin*2);
- reg &= ~IO_APIC_REDIR_VECTOR_MASK;
- reg |= vector;
- io_apic_modify(apic, 0x10 + pin*2, reg);
- if (!entry->next)
- break;
- entry = entry->next;
- }
-}
-
-static int
-assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask);
-
-/*
- * Either sets desc->affinity to a valid value, and returns
- * ->cpu_mask_to_apicid of that, or returns BAD_APICID and
- * leaves desc->affinity untouched.
- */
-static unsigned int
-set_desc_affinity(struct irq_desc *desc, const struct cpumask *mask)
-{
- struct irq_cfg *cfg;
- unsigned int irq;
-
- if (!cpumask_intersects(mask, cpu_online_mask))
- return BAD_APICID;
-
- irq = desc->irq;
- cfg = desc->chip_data;
- if (assign_irq_vector(irq, cfg, mask))
- return BAD_APICID;
-
- /* check that before desc->addinity get updated */
- set_extra_move_desc(desc, mask);
-
- cpumask_copy(desc->affinity, mask);
-
- return apic->cpu_mask_to_apicid_and(desc->affinity, cfg->domain);
-}
-
-static void
-set_ioapic_affinity_irq_desc(struct irq_desc *desc, const struct cpumask *mask)
-{
- struct irq_cfg *cfg;
- unsigned long flags;
- unsigned int dest;
- unsigned int irq;
-
- irq = desc->irq;
- cfg = desc->chip_data;
-
- spin_lock_irqsave(&ioapic_lock, flags);
- dest = set_desc_affinity(desc, mask);
- if (dest != BAD_APICID) {
- /* Only the high 8 bits are valid. */
- dest = SET_APIC_LOGICAL_ID(dest);
- __target_IO_APIC_irq(irq, dest, cfg);
- }
- spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-static void
-set_ioapic_affinity_irq(unsigned int irq, const struct cpumask *mask)
-{
- struct irq_desc *desc;
-
- desc = irq_to_desc(irq);
-
- set_ioapic_affinity_irq_desc(desc, mask);
-}
-#endif /* CONFIG_SMP */
-
/*
* The common case is 1:1 IRQ<->pin mappings. Sometimes there are
* shared ISA-space IRQs, so we have to support them. We are super
* fast in the common case, and fast for shared ISA-space IRQs.
*/
-static void add_pin_to_irq_cpu(struct irq_cfg *cfg, int cpu, int apic, int pin)
+static void add_pin_to_irq_node(struct irq_cfg *cfg, int node, int apic, int pin)
{
struct irq_pin_list *entry;
entry = cfg->irq_2_pin;
if (!entry) {
- entry = get_one_free_irq_2_pin(cpu);
+ entry = get_one_free_irq_2_pin(node);
if (!entry) {
printk(KERN_ERR "can not alloc irq_2_pin to add %d - %d\n",
apic, pin);
entry = entry->next;
}
- entry->next = get_one_free_irq_2_pin(cpu);
+ entry->next = get_one_free_irq_2_pin(node);
entry = entry->next;
entry->apic = apic;
entry->pin = pin;
/*
* Reroute an IRQ to a different pin.
*/
-static void __init replace_pin_at_irq_cpu(struct irq_cfg *cfg, int cpu,
+static void __init replace_pin_at_irq_node(struct irq_cfg *cfg, int node,
int oldapic, int oldpin,
int newapic, int newpin)
{
/* why? call replace before add? */
if (!replaced)
- add_pin_to_irq_cpu(cfg, cpu, newapic, newpin);
+ add_pin_to_irq_node(cfg, node, newapic, newpin);
}
static inline void io_apic_modify_irq(struct irq_cfg *cfg,
__setup("pirq=", ioapic_pirq_setup);
#endif /* CONFIG_X86_32 */
-#ifdef CONFIG_INTR_REMAP
struct IO_APIC_route_entry **alloc_ioapic_entries(void)
{
int apic;
return 0;
}
-void reinit_intr_remapped_IO_APIC(int intr_remapping,
- struct IO_APIC_route_entry **ioapic_entries)
-
-{
- /*
- * for now plain restore of previous settings.
- * TBD: In the case of OS enabling interrupt-remapping,
- * IO-APIC RTE's need to be setup to point to interrupt-remapping
- * table entries. for now, do a plain restore, and wait for
- * the setup_IO_APIC_irqs() to do proper initialization.
- */
- restore_IO_APIC_setup(ioapic_entries);
-}
-
void free_ioapic_entries(struct IO_APIC_route_entry **ioapic_entries)
{
int apic;
kfree(ioapic_entries);
}
-#endif
/*
* Find the IRQ entry number of a certain pin.
return -1;
}
-/*
- * Find a specific PCI IRQ entry.
- * Not an __init, possibly needed by modules
- */
-static int pin_2_irq(int idx, int apic, int pin);
-
-int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin)
-{
- int apic, i, best_guess = -1;
-
- apic_printk(APIC_DEBUG, "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
- bus, slot, pin);
- if (test_bit(bus, mp_bus_not_pci)) {
- apic_printk(APIC_VERBOSE, "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
- return -1;
- }
- for (i = 0; i < mp_irq_entries; i++) {
- int lbus = mp_irqs[i].srcbus;
-
- for (apic = 0; apic < nr_ioapics; apic++)
- if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic ||
- mp_irqs[i].dstapic == MP_APIC_ALL)
- break;
-
- if (!test_bit(lbus, mp_bus_not_pci) &&
- !mp_irqs[i].irqtype &&
- (bus == lbus) &&
- (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) {
- int irq = pin_2_irq(i, apic, mp_irqs[i].dstirq);
-
- if (!(apic || IO_APIC_IRQ(irq)))
- continue;
-
- if (pin == (mp_irqs[i].srcbusirq & 3))
- return irq;
- /*
- * Use the first all-but-pin matching entry as a
- * best-guess fuzzy result for broken mptables.
- */
- if (best_guess < 0)
- best_guess = irq;
- }
- }
- return best_guess;
-}
-
-EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
-
#if defined(CONFIG_EISA) || defined(CONFIG_MCA)
/*
* EISA Edge/Level control register, ELCR
return irq;
}
+/*
+ * Find a specific PCI IRQ entry.
+ * Not an __init, possibly needed by modules
+ */
+int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin,
+ struct io_apic_irq_attr *irq_attr)
+{
+ int apic, i, best_guess = -1;
+
+ apic_printk(APIC_DEBUG,
+ "querying PCI -> IRQ mapping bus:%d, slot:%d, pin:%d.\n",
+ bus, slot, pin);
+ if (test_bit(bus, mp_bus_not_pci)) {
+ apic_printk(APIC_VERBOSE,
+ "PCI BIOS passed nonexistent PCI bus %d!\n", bus);
+ return -1;
+ }
+ for (i = 0; i < mp_irq_entries; i++) {
+ int lbus = mp_irqs[i].srcbus;
+
+ for (apic = 0; apic < nr_ioapics; apic++)
+ if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic ||
+ mp_irqs[i].dstapic == MP_APIC_ALL)
+ break;
+
+ if (!test_bit(lbus, mp_bus_not_pci) &&
+ !mp_irqs[i].irqtype &&
+ (bus == lbus) &&
+ (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) {
+ int irq = pin_2_irq(i, apic, mp_irqs[i].dstirq);
+
+ if (!(apic || IO_APIC_IRQ(irq)))
+ continue;
+
+ if (pin == (mp_irqs[i].srcbusirq & 3)) {
+ set_io_apic_irq_attr(irq_attr, apic,
+ mp_irqs[i].dstirq,
+ irq_trigger(i),
+ irq_polarity(i));
+ return irq;
+ }
+ /*
+ * Use the first all-but-pin matching entry as a
+ * best-guess fuzzy result for broken mptables.
+ */
+ if (best_guess < 0) {
+ set_io_apic_irq_attr(irq_attr, apic,
+ mp_irqs[i].dstirq,
+ irq_trigger(i),
+ irq_polarity(i));
+ best_guess = irq;
+ }
+ }
+ }
+ return best_guess;
+}
+EXPORT_SYMBOL(IO_APIC_get_PCI_irq_vector);
+
void lock_vector_lock(void)
{
/* Used to the online set of cpus does not change
ioapic_write_entry(apic_id, pin, entry);
}
+static struct {
+ DECLARE_BITMAP(pin_programmed, MP_MAX_IOAPIC_PIN + 1);
+} mp_ioapic_routing[MAX_IO_APICS];
+
static void __init setup_IO_APIC_irqs(void)
{
- int apic_id, pin, idx, irq;
+ int apic_id = 0, pin, idx, irq;
int notcon = 0;
struct irq_desc *desc;
struct irq_cfg *cfg;
- int cpu = boot_cpu_id;
+ int node = cpu_to_node(boot_cpu_id);
apic_printk(APIC_VERBOSE, KERN_DEBUG "init IO_APIC IRQs\n");
- for (apic_id = 0; apic_id < nr_ioapics; apic_id++) {
- for (pin = 0; pin < nr_ioapic_registers[apic_id]; pin++) {
-
- idx = find_irq_entry(apic_id, pin, mp_INT);
- if (idx == -1) {
- if (!notcon) {
- notcon = 1;
- apic_printk(APIC_VERBOSE,
- KERN_DEBUG " %d-%d",
- mp_ioapics[apic_id].apicid, pin);
- } else
- apic_printk(APIC_VERBOSE, " %d-%d",
- mp_ioapics[apic_id].apicid, pin);
- continue;
- }
- if (notcon) {
- apic_printk(APIC_VERBOSE,
- " (apicid-pin) not connected\n");
- notcon = 0;
- }
+#ifdef CONFIG_ACPI
+ if (!acpi_disabled && acpi_ioapic) {
+ apic_id = mp_find_ioapic(0);
+ if (apic_id < 0)
+ apic_id = 0;
+ }
+#endif
- irq = pin_2_irq(idx, apic_id, pin);
+ for (pin = 0; pin < nr_ioapic_registers[apic_id]; pin++) {
+ idx = find_irq_entry(apic_id, pin, mp_INT);
+ if (idx == -1) {
+ if (!notcon) {
+ notcon = 1;
+ apic_printk(APIC_VERBOSE,
+ KERN_DEBUG " %d-%d",
+ mp_ioapics[apic_id].apicid, pin);
+ } else
+ apic_printk(APIC_VERBOSE, " %d-%d",
+ mp_ioapics[apic_id].apicid, pin);
+ continue;
+ }
+ if (notcon) {
+ apic_printk(APIC_VERBOSE,
+ " (apicid-pin) not connected\n");
+ notcon = 0;
+ }
- /*
- * Skip the timer IRQ if there's a quirk handler
- * installed and if it returns 1:
- */
- if (apic->multi_timer_check &&
- apic->multi_timer_check(apic_id, irq))
- continue;
+ irq = pin_2_irq(idx, apic_id, pin);
- desc = irq_to_desc_alloc_cpu(irq, cpu);
- if (!desc) {
- printk(KERN_INFO "can not get irq_desc for %d\n", irq);
- continue;
- }
- cfg = desc->chip_data;
- add_pin_to_irq_cpu(cfg, cpu, apic_id, pin);
+ /*
+ * Skip the timer IRQ if there's a quirk handler
+ * installed and if it returns 1:
+ */
+ if (apic->multi_timer_check &&
+ apic->multi_timer_check(apic_id, irq))
+ continue;
- setup_IO_APIC_irq(apic_id, pin, irq, desc,
- irq_trigger(idx), irq_polarity(idx));
+ desc = irq_to_desc_alloc_node(irq, node);
+ if (!desc) {
+ printk(KERN_INFO "can not get irq_desc for %d\n", irq);
+ continue;
}
+ cfg = desc->chip_data;
+ add_pin_to_irq_node(cfg, node, apic_id, pin);
+ /*
+ * don't mark it in pin_programmed, so later acpi could
+ * set it correctly when irq < 16
+ */
+ setup_IO_APIC_irq(apic_id, pin, irq, desc,
+ irq_trigger(idx), irq_polarity(idx));
}
if (notcon)
__apicdebuginit(void) print_local_APIC(void *dummy)
{
- unsigned int v, ver, maxlvt;
+ unsigned int i, v, ver, maxlvt;
u64 icr;
if (apic_verbosity == APIC_QUIET)
printk(KERN_DEBUG "... APIC TMCCT: %08x\n", v);
v = apic_read(APIC_TDCR);
printk(KERN_DEBUG "... APIC TDCR: %08x\n", v);
+
+ if (boot_cpu_has(X86_FEATURE_EXTAPIC)) {
+ v = apic_read(APIC_EFEAT);
+ maxlvt = (v >> 16) & 0xff;
+ printk(KERN_DEBUG "... APIC EFEAT: %08x\n", v);
+ v = apic_read(APIC_ECTRL);
+ printk(KERN_DEBUG "... APIC ECTRL: %08x\n", v);
+ for (i = 0; i < maxlvt; i++) {
+ v = apic_read(APIC_EILVTn(i));
+ printk(KERN_DEBUG "... APIC EILVT%d: %08x\n", i, v);
+ }
+ }
printk("\n");
}
__apicdebuginit(int) print_all_ICs(void)
{
print_PIC();
+
+ /* don't print out if apic is not there */
+ if (!cpu_has_apic || disable_apic)
+ return 0;
+
print_all_local_APICs();
print_IO_APIC();
*/
#ifdef CONFIG_SMP
+static void send_cleanup_vector(struct irq_cfg *cfg)
+{
+ cpumask_var_t cleanup_mask;
+
+ if (unlikely(!alloc_cpumask_var(&cleanup_mask, GFP_ATOMIC))) {
+ unsigned int i;
+ cfg->move_cleanup_count = 0;
+ for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
+ cfg->move_cleanup_count++;
+ for_each_cpu_and(i, cfg->old_domain, cpu_online_mask)
+ apic->send_IPI_mask(cpumask_of(i), IRQ_MOVE_CLEANUP_VECTOR);
+ } else {
+ cpumask_and(cleanup_mask, cfg->old_domain, cpu_online_mask);
+ cfg->move_cleanup_count = cpumask_weight(cleanup_mask);
+ apic->send_IPI_mask(cleanup_mask, IRQ_MOVE_CLEANUP_VECTOR);
+ free_cpumask_var(cleanup_mask);
+ }
+ cfg->move_in_progress = 0;
+}
+
+static void __target_IO_APIC_irq(unsigned int irq, unsigned int dest, struct irq_cfg *cfg)
+{
+ int apic, pin;
+ struct irq_pin_list *entry;
+ u8 vector = cfg->vector;
+
+ entry = cfg->irq_2_pin;
+ for (;;) {
+ unsigned int reg;
+
+ if (!entry)
+ break;
+
+ apic = entry->apic;
+ pin = entry->pin;
+ /*
+ * With interrupt-remapping, destination information comes
+ * from interrupt-remapping table entry.
+ */
+ if (!irq_remapped(irq))
+ io_apic_write(apic, 0x11 + pin*2, dest);
+ reg = io_apic_read(apic, 0x10 + pin*2);
+ reg &= ~IO_APIC_REDIR_VECTOR_MASK;
+ reg |= vector;
+ io_apic_modify(apic, 0x10 + pin*2, reg);
+ if (!entry->next)
+ break;
+ entry = entry->next;
+ }
+}
+
+static int
+assign_irq_vector(int irq, struct irq_cfg *cfg, const struct cpumask *mask);
+
+/*
+ * Either sets desc->affinity to a valid value, and returns
+ * ->cpu_mask_to_apicid of that, or returns BAD_APICID and
+ * leaves desc->affinity untouched.
+ */
+static unsigned int
+set_desc_affinity(struct irq_desc *desc, const struct cpumask *mask)
+{
+ struct irq_cfg *cfg;
+ unsigned int irq;
+
+ if (!cpumask_intersects(mask, cpu_online_mask))
+ return BAD_APICID;
+
+ irq = desc->irq;
+ cfg = desc->chip_data;
+ if (assign_irq_vector(irq, cfg, mask))
+ return BAD_APICID;
+
+ cpumask_copy(desc->affinity, mask);
+
+ return apic->cpu_mask_to_apicid_and(desc->affinity, cfg->domain);
+}
+
+static int
+set_ioapic_affinity_irq_desc(struct irq_desc *desc, const struct cpumask *mask)
+{
+ struct irq_cfg *cfg;
+ unsigned long flags;
+ unsigned int dest;
+ unsigned int irq;
+ int ret = -1;
+
+ irq = desc->irq;
+ cfg = desc->chip_data;
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ dest = set_desc_affinity(desc, mask);
+ if (dest != BAD_APICID) {
+ /* Only the high 8 bits are valid. */
+ dest = SET_APIC_LOGICAL_ID(dest);
+ __target_IO_APIC_irq(irq, dest, cfg);
+ ret = 0;
+ }
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+
+ return ret;
+}
+
+static int
+set_ioapic_affinity_irq(unsigned int irq, const struct cpumask *mask)
+{
+ struct irq_desc *desc;
+
+ desc = irq_to_desc(irq);
+
+ return set_ioapic_affinity_irq_desc(desc, mask);
+}
+
+#ifdef CONFIG_INTR_REMAP
-#ifdef CONFIG_INTR_REMAP
-
/*
* Migrate the IO-APIC irq in the presence of intr-remapping.
*
* Real vector that is used for interrupting cpu will be coming from
* the interrupt-remapping table entry.
*/
-static void
+static int
migrate_ioapic_irq_desc(struct irq_desc *desc, const struct cpumask *mask)
{
struct irq_cfg *cfg;
struct irte irte;
unsigned int dest;
unsigned int irq;
+ int ret = -1;
if (!cpumask_intersects(mask, cpu_online_mask))
- return;
+ return ret;
irq = desc->irq;
if (get_irte(irq, &irte))
- return;
+ return ret;
cfg = desc->chip_data;
if (assign_irq_vector(irq, cfg, mask))
- return;
-
- set_extra_move_desc(desc, mask);
+ return ret;
dest = apic->cpu_mask_to_apicid_and(cfg->domain, mask);
send_cleanup_vector(cfg);
cpumask_copy(desc->affinity, mask);
+
+ return 0;
}
/*
* Migrates the IRQ destination in the process context.
*/
-static void set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc,
+static int set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc,
const struct cpumask *mask)
{
- migrate_ioapic_irq_desc(desc, mask);
+ return migrate_ioapic_irq_desc(desc, mask);
}
-static void set_ir_ioapic_affinity_irq(unsigned int irq,
+static int set_ir_ioapic_affinity_irq(unsigned int irq,
const struct cpumask *mask)
{
struct irq_desc *desc = irq_to_desc(irq);
- set_ir_ioapic_affinity_irq_desc(desc, mask);
+ return set_ir_ioapic_affinity_irq_desc(desc, mask);
}
#else
-static inline void set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc,
+static inline int set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc,
const struct cpumask *mask)
{
+ return 0;
}
#endif
struct irq_cfg *cfg = desc->chip_data;
unsigned vector, me;
- if (likely(!cfg->move_in_progress)) {
-#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
- if (likely(!cfg->move_desc_pending))
- return;
-
- /* domain has not changed, but affinity did */
- me = smp_processor_id();
- if (cpumask_test_cpu(me, desc->affinity)) {
- *descp = desc = move_irq_desc(desc, me);
- /* get the new one */
- cfg = desc->chip_data;
- cfg->move_desc_pending = 0;
- }
-#endif
+ if (likely(!cfg->move_in_progress))
return;
- }
vector = ~get_irq_regs()->orig_ax;
me = smp_processor_id();
- if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain)) {
-#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
- *descp = desc = move_irq_desc(desc, me);
- /* get the new one */
- cfg = desc->chip_data;
-#endif
+ if (vector == cfg->vector && cpumask_test_cpu(me, cfg->domain))
send_cleanup_vector(cfg);
- }
}
#else
static inline void irq_complete_move(struct irq_desc **descp) {}
#endif
-static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
-{
- int apic, pin;
- struct irq_pin_list *entry;
-
- entry = cfg->irq_2_pin;
- for (;;) {
-
- if (!entry)
- break;
-
- apic = entry->apic;
- pin = entry->pin;
- io_apic_eoi(apic, pin);
- entry = entry->next;
- }
-}
-
-static void
-eoi_ioapic_irq(struct irq_desc *desc)
-{
- struct irq_cfg *cfg;
- unsigned long flags;
- unsigned int irq;
-
- irq = desc->irq;
- cfg = desc->chip_data;
-
- spin_lock_irqsave(&ioapic_lock, flags);
- __eoi_ioapic_irq(irq, cfg);
- spin_unlock_irqrestore(&ioapic_lock, flags);
-}
-
-#ifdef CONFIG_X86_X2APIC
-static void ack_x2apic_level(unsigned int irq)
-{
- struct irq_desc *desc = irq_to_desc(irq);
- ack_x2APIC_irq();
- eoi_ioapic_irq(desc);
-}
-
-static void ack_x2apic_edge(unsigned int irq)
-{
- ack_x2APIC_irq();
-}
-#endif
-
static void ack_apic_edge(unsigned int irq)
{
struct irq_desc *desc = irq_to_desc(irq);
*/
ack_APIC_irq();
- if (irq_remapped(irq))
- eoi_ioapic_irq(desc);
-
/* Now we can move and renable the irq */
if (unlikely(do_unmask_irq)) {
/* Only migrate the irq if the ack has been received.
}
#ifdef CONFIG_INTR_REMAP
+static void __eoi_ioapic_irq(unsigned int irq, struct irq_cfg *cfg)
+{
+ int apic, pin;
+ struct irq_pin_list *entry;
+
+ entry = cfg->irq_2_pin;
+ for (;;) {
+
+ if (!entry)
+ break;
+
+ apic = entry->apic;
+ pin = entry->pin;
+ io_apic_eoi(apic, pin);
+ entry = entry->next;
+ }
+}
+
+static void
+eoi_ioapic_irq(struct irq_desc *desc)
+{
+ struct irq_cfg *cfg;
+ unsigned long flags;
+ unsigned int irq;
+
+ irq = desc->irq;
+ cfg = desc->chip_data;
+
+ spin_lock_irqsave(&ioapic_lock, flags);
+ __eoi_ioapic_irq(irq, cfg);
+ spin_unlock_irqrestore(&ioapic_lock, flags);
+}
+
static void ir_ack_apic_edge(unsigned int irq)
{
-#ifdef CONFIG_X86_X2APIC
- if (x2apic_enabled())
- return ack_x2apic_edge(irq);
-#endif
- return ack_apic_edge(irq);
+ ack_APIC_irq();
}
static void ir_ack_apic_level(unsigned int irq)
{
-#ifdef CONFIG_X86_X2APIC
- if (x2apic_enabled())
- return ack_x2apic_level(irq);
-#endif
- return ack_apic_level(irq);
+ struct irq_desc *desc = irq_to_desc(irq);
+
+ ack_APIC_irq();
+ eoi_ioapic_irq(desc);
}
#endif /* CONFIG_INTR_REMAP */
{
struct irq_desc *desc = irq_to_desc(0);
struct irq_cfg *cfg = desc->chip_data;
- int cpu = boot_cpu_id;
+ int node = cpu_to_node(boot_cpu_id);
int apic1, pin1, apic2, pin2;
unsigned long flags;
int no_pin1 = 0;
* Ok, does IRQ0 through the IOAPIC work?
*/
if (no_pin1) {
- add_pin_to_irq_cpu(cfg, cpu, apic1, pin1);
+ add_pin_to_irq_node(cfg, node, apic1, pin1);
setup_timer_IRQ0_pin(apic1, pin1, cfg->vector);
} else {
/* for edge trigger, setup_IO_APIC_irq already
/*
* legacy devices should be connected to IO APIC #0
*/
- replace_pin_at_irq_cpu(cfg, cpu, apic1, pin1, apic2, pin2);
+ replace_pin_at_irq_node(cfg, node, apic1, pin1, apic2, pin2);
setup_timer_IRQ0_pin(apic2, pin2, cfg->vector);
enable_8259A_irq(0);
if (timer_irq_works()) {
/*
* Dynamic irq allocate and deallocation
*/
-unsigned int create_irq_nr(unsigned int irq_want)
+unsigned int create_irq_nr(unsigned int irq_want, int node)
{
/* Allocate an unused irq */
unsigned int irq;
unsigned int new;
unsigned long flags;
struct irq_cfg *cfg_new = NULL;
- int cpu = boot_cpu_id;
struct irq_desc *desc_new = NULL;
irq = 0;
spin_lock_irqsave(&vector_lock, flags);
for (new = irq_want; new < nr_irqs; new++) {
- desc_new = irq_to_desc_alloc_cpu(new, cpu);
+ desc_new = irq_to_desc_alloc_node(new, node);
if (!desc_new) {
printk(KERN_INFO "can not get irq_desc for %d\n", new);
continue;
if (cfg_new->vector != 0)
continue;
+
+ desc_new = move_irq_desc(desc_new, node);
+
if (__assign_irq_vector(new, cfg_new, apic->target_cpus()) == 0)
irq = new;
break;
int create_irq(void)
{
+ int node = cpu_to_node(boot_cpu_id);
unsigned int irq_want;
int irq;
irq_want = nr_irqs_gsi;
- irq = create_irq_nr(irq_want);
+ irq = create_irq_nr(irq_want, node);
if (irq == 0)
irq = -1;
}
#ifdef CONFIG_SMP
-static void set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask)
+static int set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask)
{
struct irq_desc *desc = irq_to_desc(irq);
struct irq_cfg *cfg;
dest = set_desc_affinity(desc, mask);
if (dest == BAD_APICID)
- return;
+ return -1;
cfg = desc->chip_data;
msg.address_lo |= MSI_ADDR_DEST_ID(dest);
write_msi_msg_desc(desc, &msg);
+
+ return 0;
}
#ifdef CONFIG_INTR_REMAP
/*
* Migrate the MSI irq to another cpumask. This migration is
* done in the process context using interrupt-remapping hardware.
*/
-static void
+static int
ir_set_msi_irq_affinity(unsigned int irq, const struct cpumask *mask)
{
struct irq_desc *desc = irq_to_desc(irq);
struct irte irte;
if (get_irte(irq, &irte))
- return;
+ return -1;
dest = set_desc_affinity(desc, mask);
if (dest == BAD_APICID)
- return;
+ return -1;
irte.vector = cfg->vector;
irte.dest_id = IRTE_DEST(dest);
*/
if (cfg->move_in_progress)
send_cleanup_vector(cfg);
+
+ return 0;
}
#endif
unsigned int irq_want;
struct intel_iommu *iommu = NULL;
int index = 0;
+ int node;
/* x86 doesn't support multiple MSI yet */
if (type == PCI_CAP_ID_MSI && nvec > 1)
return 1;
+ node = dev_to_node(&dev->dev);
irq_want = nr_irqs_gsi;
sub_handle = 0;
list_for_each_entry(msidesc, &dev->msi_list, list) {
- irq = create_irq_nr(irq_want);
+ irq = create_irq_nr(irq_want, node);
if (irq == 0)
return -1;
irq_want = irq + 1;
#if defined (CONFIG_DMAR) || defined (CONFIG_INTR_REMAP)
#ifdef CONFIG_SMP
-static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
+static int dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
{
struct irq_desc *desc = irq_to_desc(irq);
struct irq_cfg *cfg;
dest = set_desc_affinity(desc, mask);
if (dest == BAD_APICID)
- return;
+ return -1;
cfg = desc->chip_data;
msg.address_lo |= MSI_ADDR_DEST_ID(dest);
dmar_msi_write(irq, &msg);
+
+ return 0;
}
#endif /* CONFIG_SMP */
#ifdef CONFIG_HPET_TIMER
#ifdef CONFIG_SMP
-static void hpet_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
+static int hpet_msi_set_affinity(unsigned int irq, const struct cpumask *mask)
{
struct irq_desc *desc = irq_to_desc(irq);
struct irq_cfg *cfg;
dest = set_desc_affinity(desc, mask);
if (dest == BAD_APICID)
- return;
+ return -1;
cfg = desc->chip_data;
msg.address_lo |= MSI_ADDR_DEST_ID(dest);
hpet_msi_write(irq, &msg);
+
+ return 0;
}
#endif /* CONFIG_SMP */
write_ht_irq_msg(irq, &msg);
}
-static void set_ht_irq_affinity(unsigned int irq, const struct cpumask *mask)
+static int set_ht_irq_affinity(unsigned int irq, const struct cpumask *mask)
{
struct irq_desc *desc = irq_to_desc(irq);
struct irq_cfg *cfg;
dest = set_desc_affinity(desc, mask);
if (dest == BAD_APICID)
- return;
+ return -1;
cfg = desc->chip_data;
target_ht_irq(irq, dest, cfg->vector);
+
+ return 0;
}
#endif
unsigned long flags;
int err;
+ BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
+
cfg = irq_cfg(irq);
err = assign_irq_vector(irq, cfg, eligible_cpu);
mmr_value = 0;
entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
- BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
-
- entry->vector = cfg->vector;
- entry->delivery_mode = apic->irq_delivery_mode;
- entry->dest_mode = apic->irq_dest_mode;
- entry->polarity = 0;
- entry->trigger = 0;
- entry->mask = 0;
- entry->dest = apic->cpu_mask_to_apicid(eligible_cpu);
+ entry->vector = cfg->vector;
+ entry->delivery_mode = apic->irq_delivery_mode;
+ entry->dest_mode = apic->irq_dest_mode;
+ entry->polarity = 0;
+ entry->trigger = 0;
+ entry->mask = 0;
+ entry->dest = apic->cpu_mask_to_apicid(eligible_cpu);
mmr_pnode = uv_blade_to_pnode(mmr_blade);
uv_write_global_mmr64(mmr_pnode, mmr_offset, mmr_value);
struct uv_IO_APIC_route_entry *entry;
int mmr_pnode;
+ BUILD_BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
+
mmr_value = 0;
entry = (struct uv_IO_APIC_route_entry *)&mmr_value;
- BUG_ON(sizeof(struct uv_IO_APIC_route_entry) != sizeof(unsigned long));
-
entry->mask = 1;
mmr_pnode = uv_blade_to_pnode(mmr_blade);
}
#endif
+static int __io_apic_set_pci_routing(struct device *dev, int irq,
+ struct io_apic_irq_attr *irq_attr)
+{
+ struct irq_desc *desc;
+ struct irq_cfg *cfg;
+ int node;
+ int ioapic, pin;
+ int trigger, polarity;
+
+ ioapic = irq_attr->ioapic;
+ if (!IO_APIC_IRQ(irq)) {
+ apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
+ ioapic);
+ return -EINVAL;
+ }
+
+ if (dev)
+ node = dev_to_node(dev);
+ else
+ node = cpu_to_node(boot_cpu_id);
+
+ desc = irq_to_desc_alloc_node(irq, node);
+ if (!desc) {
+ printk(KERN_INFO "can not get irq_desc %d\n", irq);
+ return 0;
+ }
+
+ pin = irq_attr->ioapic_pin;
+ trigger = irq_attr->trigger;
+ polarity = irq_attr->polarity;
+
+ /*
+ * IRQs < 16 are already in the irq_2_pin[] map
+ */
+ if (irq >= NR_IRQS_LEGACY) {
+ cfg = desc->chip_data;
+ add_pin_to_irq_node(cfg, node, ioapic, pin);
+ }
+
+ setup_IO_APIC_irq(ioapic, pin, irq, desc, trigger, polarity);
+
+ return 0;
+}
+
+int io_apic_set_pci_routing(struct device *dev, int irq,
+ struct io_apic_irq_attr *irq_attr)
+{
+ int ioapic, pin;
+ /*
+ * Avoid pin reprogramming. PRTs typically include entries
+ * with redundant pin->gsi mappings (but unique PCI devices);
+ * we only program the IOAPIC on the first.
+ */
+ ioapic = irq_attr->ioapic;
+ pin = irq_attr->ioapic_pin;
+ if (test_bit(pin, mp_ioapic_routing[ioapic].pin_programmed)) {
+ pr_debug("Pin %d-%d already programmed\n",
+ mp_ioapics[ioapic].apicid, pin);
+ return 0;
+ }
+ set_bit(pin, mp_ioapic_routing[ioapic].pin_programmed);
+
+ return __io_apic_set_pci_routing(dev, irq, irq_attr);
+}
+
/* --------------------------------------------------------------------------
ACPI-based IOAPIC Configuration
-------------------------------------------------------------------------- */
return apic_id;
}
+#endif
int __init io_apic_get_version(int ioapic)
{
return reg_01.bits.version;
}
-#endif
-
-int io_apic_set_pci_routing (int ioapic, int pin, int irq, int triggering, int polarity)
-{
- struct irq_desc *desc;
- struct irq_cfg *cfg;
- int cpu = boot_cpu_id;
-
- if (!IO_APIC_IRQ(irq)) {
- apic_printk(APIC_QUIET,KERN_ERR "IOAPIC[%d]: Invalid reference to IRQ 0\n",
- ioapic);
- return -EINVAL;
- }
-
- desc = irq_to_desc_alloc_cpu(irq, cpu);
- if (!desc) {
- printk(KERN_INFO "can not get irq_desc %d\n", irq);
- return 0;
- }
-
- /*
- * IRQs < 16 are already in the irq_2_pin[] map
- */
- if (irq >= NR_IRQS_LEGACY) {
- cfg = desc->chip_data;
- add_pin_to_irq_cpu(cfg, cpu, ioapic, pin);
- }
-
- setup_IO_APIC_irq(ioapic, pin, irq, desc, triggering, polarity);
-
- return 0;
-}
-
int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity)
{
#ifdef CONFIG_SMP
void __init setup_ioapic_dest(void)
{
- int pin, ioapic, irq, irq_entry;
+ int pin, ioapic = 0, irq, irq_entry;
struct irq_desc *desc;
- struct irq_cfg *cfg;
const struct cpumask *mask;
if (skip_ioapic_setup == 1)
return;
- for (ioapic = 0; ioapic < nr_ioapics; ioapic++) {
- for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
- irq_entry = find_irq_entry(ioapic, pin, mp_INT);
- if (irq_entry == -1)
- continue;
- irq = pin_2_irq(irq_entry, ioapic, pin);
-
- /* setup_IO_APIC_irqs could fail to get vector for some device
- * when you have too many devices, because at that time only boot
- * cpu is online.
- */
- desc = irq_to_desc(irq);
- cfg = desc->chip_data;
- if (!cfg->vector) {
- setup_IO_APIC_irq(ioapic, pin, irq, desc,
- irq_trigger(irq_entry),
- irq_polarity(irq_entry));
- continue;
+#ifdef CONFIG_ACPI
+ if (!acpi_disabled && acpi_ioapic) {
+ ioapic = mp_find_ioapic(0);
+ if (ioapic < 0)
+ ioapic = 0;
+ }
+#endif
- }
+ for (pin = 0; pin < nr_ioapic_registers[ioapic]; pin++) {
+ irq_entry = find_irq_entry(ioapic, pin, mp_INT);
+ if (irq_entry == -1)
+ continue;
+ irq = pin_2_irq(irq_entry, ioapic, pin);
- /*
- * Honour affinities which have been set in early boot
- */
- if (desc->status &
- (IRQ_NO_BALANCING | IRQ_AFFINITY_SET))
- mask = desc->affinity;
- else
- mask = apic->target_cpus();
+ desc = irq_to_desc(irq);
- if (intr_remapping_enabled)
- set_ir_ioapic_affinity_irq_desc(desc, mask);
- else
- set_ioapic_affinity_irq_desc(desc, mask);
- }
+ /*
+ * Honour affinities which have been set in early boot
+ */
+ if (desc->status &
+ (IRQ_NO_BALANCING | IRQ_AFFINITY_SET))
+ mask = desc->affinity;
+ else
+ mask = apic->target_cpus();
+ if (intr_remapping_enabled)
+ set_ir_ioapic_affinity_irq_desc(desc, mask);
+ else
+ set_ioapic_affinity_irq_desc(desc, mask);
}
+
}
#endif
}
#endif
-static void report_broken_nmi(int cpu, int *prev_nmi_count)
+static void report_broken_nmi(int cpu, unsigned int *prev_nmi_count)
{
printk(KERN_CONT "\n");
extern struct apic apic_bigsmp;
extern struct apic apic_es7000;
extern struct apic apic_es7000_cluster;
-extern struct apic apic_default;
struct apic *apic = &apic_default;
EXPORT_SYMBOL_GPL(apic);
void __init default_setup_apic_routing(void)
{
#ifdef CONFIG_X86_X2APIC
- if (x2apic && (apic != &apic_x2apic_phys &&
+ if (x2apic_mode && (apic != &apic_x2apic_phys &&
#ifdef CONFIG_X86_UV
apic != &apic_x2apic_uv_x &&
#endif
rio->type == LookOutAWPEG || rio->type == LookOutBWPEG);
}
-
-/* In clustered mode, the high nibble of APIC ID is a cluster number.
- * The low nibble is a 4-bit bitmap. */
-#define XAPIC_DEST_CPUS_SHIFT 4
-#define XAPIC_DEST_CPUS_MASK ((1u << XAPIC_DEST_CPUS_SHIFT) - 1)
-#define XAPIC_DEST_CLUSTER_MASK (XAPIC_DEST_CPUS_MASK << XAPIC_DEST_CPUS_SHIFT)
-
#define SUMMIT_APIC_DFR_VALUE (APIC_DFR_CLUSTER)
static const struct cpumask *summit_target_cpus(void)
#include <asm/apic.h>
#include <asm/ipi.h>
-DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid);
+static DEFINE_PER_CPU(u32, x86_cpu_to_logical_apicid);
static int x2apic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
cpumask_set_cpu(cpu, retmask);
}
-static int uv_wakeup_secondary(int phys_apicid, unsigned long start_rip)
+static int __cpuinit uv_wakeup_secondary(int phys_apicid, unsigned long start_rip)
{
#ifdef CONFIG_SMP
unsigned long val;
union uvh_node_id_u node_id;
unsigned long gnode_upper, lowmem_redir_base, lowmem_redir_size;
int bytes, nid, cpu, lcpu, pnode, blade, i, j, m_val, n_val;
- int max_pnode = 0;
+ int gnode_extra, max_pnode = 0;
unsigned long mmr_base, present, paddr;
unsigned short pnode_mask;
mmr_base =
uv_read_local_mmr(UVH_RH_GAM_MMR_OVERLAY_CONFIG_MMR) &
~UV_MMR_ENABLE;
+ pnode_mask = (1 << n_val) - 1;
+ node_id.v = uv_read_local_mmr(UVH_NODE_ID);
+ gnode_extra = (node_id.s.node_id & ~((1 << n_val) - 1)) >> 1;
+ gnode_upper = ((unsigned long)gnode_extra << m_val);
+ printk(KERN_DEBUG "UV: N %d, M %d, gnode_upper 0x%lx, gnode_extra 0x%x\n",
+ n_val, m_val, gnode_upper, gnode_extra);
+
printk(KERN_DEBUG "UV: global MMR base 0x%lx\n", mmr_base);
for(i = 0; i < UVH_NODE_PRESENT_TABLE_DEPTH; i++)
bytes = sizeof(struct uv_blade_info) * uv_num_possible_blades();
uv_blade_info = kmalloc(bytes, GFP_KERNEL);
+ BUG_ON(!uv_blade_info);
get_lowmem_redirect(&lowmem_redir_base, &lowmem_redir_size);
bytes = sizeof(uv_node_to_blade[0]) * num_possible_nodes();
uv_node_to_blade = kmalloc(bytes, GFP_KERNEL);
+ BUG_ON(!uv_node_to_blade);
memset(uv_node_to_blade, 255, bytes);
bytes = sizeof(uv_cpu_to_blade[0]) * num_possible_cpus();
uv_cpu_to_blade = kmalloc(bytes, GFP_KERNEL);
+ BUG_ON(!uv_cpu_to_blade);
memset(uv_cpu_to_blade, 255, bytes);
blade = 0;
}
}
- pnode_mask = (1 << n_val) - 1;
- node_id.v = uv_read_local_mmr(UVH_NODE_ID);
- gnode_upper = (((unsigned long)node_id.s.node_id) &
- ~((1 << n_val) - 1)) << m_val;
-
uv_bios_init();
uv_bios_get_sn_info(0, &uv_type, &sn_partition_id,
&sn_coherency_id, &sn_region_size);
uv_cpu_hub_info(cpu)->pnode_mask = pnode_mask;
uv_cpu_hub_info(cpu)->gpa_mask = (1 << (m_val + n_val)) - 1;
uv_cpu_hub_info(cpu)->gnode_upper = gnode_upper;
+ uv_cpu_hub_info(cpu)->gnode_extra = gnode_extra;
uv_cpu_hub_info(cpu)->global_mmr_base = mmr_base;
uv_cpu_hub_info(cpu)->coherency_domain_number = sn_coherency_id;
uv_cpu_hub_info(cpu)->scir.offset = SCIR_LOCAL_MMR_BASE + lcpu;
OFFSET(BP_loadflags, boot_params, hdr.loadflags);
OFFSET(BP_hardware_subarch, boot_params, hdr.hardware_subarch);
OFFSET(BP_version, boot_params, hdr.version);
+ OFFSET(BP_kernel_alignment, boot_params, hdr.kernel_alignment);
}
OFFSET(BP_loadflags, boot_params, hdr.loadflags);
OFFSET(BP_hardware_subarch, boot_params, hdr.hardware_subarch);
OFFSET(BP_version, boot_params, hdr.version);
+ OFFSET(BP_kernel_alignment, boot_params, hdr.kernel_alignment);
BLANK();
DEFINE(PAGE_SIZE_asm, PAGE_SIZE);
#include <asm/processor.h>
#include <asm/apic.h>
#include <asm/cpu.h>
+#include <asm/pci-direct.h>
#ifdef CONFIG_X86_64
# include <asm/numa_64.h>
#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
int cpu = smp_processor_id();
int node;
- unsigned apicid = hard_smp_processor_id();
+ unsigned apicid = cpu_has_apic ? hard_smp_processor_id() : c->apicid;
node = c->phys_proc_id;
if (apicid_to_node[apicid] != NUMA_NO_NODE)
(c->x86_model == 8 && c->x86_mask >= 8))
set_cpu_cap(c, X86_FEATURE_K6_MTRR);
#endif
+#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI)
+ /* check CPU config space for extended APIC ID */
+ if (c->x86 >= 0xf) {
+ unsigned int val;
+ val = read_pci_config(0, 24, 0, 0x68);
+ if ((val & ((1 << 17) | (1 << 18))) == ((1 << 17) | (1 << 18)))
+ set_cpu_cap(c, X86_FEATURE_EXTD_APICID);
+ }
+#endif
}
static void __cpuinit init_amd(struct cpuinfo_x86 *c)
return NULL; /* Not found */
}
-__u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
+__u32 cpu_caps_cleared[NCAPINTS] __cpuinitdata;
+__u32 cpu_caps_set[NCAPINTS] __cpuinitdata;
void load_percpu_segment(int cpu)
{
if (this_cpu->c_identify)
this_cpu->c_identify(c);
+ /* Clear/Set all flags overriden by options, after probe */
+ for (i = 0; i < NCAPINTS; i++) {
+ c->x86_capability[i] &= ~cpu_caps_cleared[i];
+ c->x86_capability[i] |= cpu_caps_set[i];
+ }
+
#ifdef CONFIG_X86_64
c->apicid = apic->phys_pkg_id(c->initial_apicid, 0);
#endif
#endif
init_hypervisor(c);
+
+ /*
+ * Clear/Set all flags overriden by options, need do it
+ * before following smp all cpus cap AND.
+ */
+ for (i = 0; i < NCAPINTS; i++) {
+ c->x86_capability[i] &= ~cpu_caps_cleared[i];
+ c->x86_capability[i] |= cpu_caps_set[i];
+ }
+
/*
* On SMP, boot_cpu_data holds the common feature set between
* all CPUs; so make sure that we indicate which features are
boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
}
- /* Clear all flags overriden by options */
- for (i = 0; i < NCAPINTS; i++)
- c->x86_capability[i] &= ~cleared_cpu_caps[i];
-
#ifdef CONFIG_X86_MCE
/* Init Machine Check Exception if available. */
mcheck_init(c);
static DEFINE_PER_CPU(struct cpu_cpuX_base, cpu_arr[CPU_REG_ALL_BIT]);
static DEFINE_PER_CPU(struct cpu_private *, priv_arr[MAX_CPU_FILES]);
-static DEFINE_PER_CPU(unsigned, cpu_modelflag);
static DEFINE_PER_CPU(int, cpu_priv_count);
-static DEFINE_PER_CPU(unsigned, cpu_model);
static DEFINE_MUTEX(cpu_debug_lock);
{ "value", CPU_REG_ALL, 1 },
};
-/* Intel Registers Range */
-static struct cpu_debug_range cpu_intel_range[] = {
- { 0x00000000, 0x00000001, CPU_MC, CPU_INTEL_ALL },
- { 0x00000006, 0x00000007, CPU_MONITOR, CPU_CX_AT_XE },
- { 0x00000010, 0x00000010, CPU_TIME, CPU_INTEL_ALL },
- { 0x00000011, 0x00000013, CPU_PMC, CPU_INTEL_PENTIUM },
- { 0x00000017, 0x00000017, CPU_PLATFORM, CPU_PX_CX_AT_XE },
- { 0x0000001B, 0x0000001B, CPU_APIC, CPU_P6_CX_AT_XE },
-
- { 0x0000002A, 0x0000002A, CPU_POWERON, CPU_PX_CX_AT_XE },
- { 0x0000002B, 0x0000002B, CPU_POWERON, CPU_INTEL_XEON },
- { 0x0000002C, 0x0000002C, CPU_FREQ, CPU_INTEL_XEON },
- { 0x0000003A, 0x0000003A, CPU_CONTROL, CPU_CX_AT_XE },
-
- { 0x00000040, 0x00000043, CPU_LBRANCH, CPU_PM_CX_AT_XE },
- { 0x00000044, 0x00000047, CPU_LBRANCH, CPU_PM_CO_AT },
- { 0x00000060, 0x00000063, CPU_LBRANCH, CPU_C2_AT },
- { 0x00000064, 0x00000067, CPU_LBRANCH, CPU_INTEL_ATOM },
-
- { 0x00000079, 0x00000079, CPU_BIOS, CPU_P6_CX_AT_XE },
- { 0x00000088, 0x0000008A, CPU_CACHE, CPU_INTEL_P6 },
- { 0x0000008B, 0x0000008B, CPU_BIOS, CPU_P6_CX_AT_XE },
- { 0x0000009B, 0x0000009B, CPU_MONITOR, CPU_INTEL_XEON },
-
- { 0x000000C1, 0x000000C2, CPU_PMC, CPU_P6_CX_AT },
- { 0x000000CD, 0x000000CD, CPU_FREQ, CPU_CX_AT },
- { 0x000000E7, 0x000000E8, CPU_PERF, CPU_CX_AT },
- { 0x000000FE, 0x000000FE, CPU_MTRR, CPU_P6_CX_XE },
-
- { 0x00000116, 0x00000116, CPU_CACHE, CPU_INTEL_P6 },
- { 0x00000118, 0x00000118, CPU_CACHE, CPU_INTEL_P6 },
- { 0x00000119, 0x00000119, CPU_CACHE, CPU_INTEL_PX },
- { 0x0000011A, 0x0000011B, CPU_CACHE, CPU_INTEL_P6 },
- { 0x0000011E, 0x0000011E, CPU_CACHE, CPU_PX_CX_AT },
-
- { 0x00000174, 0x00000176, CPU_SYSENTER, CPU_P6_CX_AT_XE },
- { 0x00000179, 0x0000017A, CPU_MC, CPU_PX_CX_AT_XE },
- { 0x0000017B, 0x0000017B, CPU_MC, CPU_P6_XE },
- { 0x00000186, 0x00000187, CPU_PMC, CPU_P6_CX_AT },
- { 0x00000198, 0x00000199, CPU_PERF, CPU_PM_CX_AT_XE },
- { 0x0000019A, 0x0000019A, CPU_TIME, CPU_PM_CX_AT_XE },
- { 0x0000019B, 0x0000019D, CPU_THERM, CPU_PM_CX_AT_XE },
- { 0x000001A0, 0x000001A0, CPU_MISC, CPU_PM_CX_AT_XE },
-
- { 0x000001C9, 0x000001C9, CPU_LBRANCH, CPU_PM_CX_AT },
- { 0x000001D7, 0x000001D8, CPU_LBRANCH, CPU_INTEL_XEON },
- { 0x000001D9, 0x000001D9, CPU_DEBUG, CPU_CX_AT_XE },
- { 0x000001DA, 0x000001DA, CPU_LBRANCH, CPU_INTEL_XEON },
- { 0x000001DB, 0x000001DB, CPU_LBRANCH, CPU_P6_XE },
- { 0x000001DC, 0x000001DC, CPU_LBRANCH, CPU_INTEL_P6 },
- { 0x000001DD, 0x000001DE, CPU_LBRANCH, CPU_PX_CX_AT_XE },
- { 0x000001E0, 0x000001E0, CPU_LBRANCH, CPU_INTEL_P6 },
-
- { 0x00000200, 0x0000020F, CPU_MTRR, CPU_P6_CX_XE },
- { 0x00000250, 0x00000250, CPU_MTRR, CPU_P6_CX_XE },
- { 0x00000258, 0x00000259, CPU_MTRR, CPU_P6_CX_XE },
- { 0x00000268, 0x0000026F, CPU_MTRR, CPU_P6_CX_XE },
- { 0x00000277, 0x00000277, CPU_PAT, CPU_C2_AT_XE },
- { 0x000002FF, 0x000002FF, CPU_MTRR, CPU_P6_CX_XE },
-
- { 0x00000300, 0x00000308, CPU_PMC, CPU_INTEL_XEON },
- { 0x00000309, 0x0000030B, CPU_PMC, CPU_C2_AT_XE },
- { 0x0000030C, 0x00000311, CPU_PMC, CPU_INTEL_XEON },
- { 0x00000345, 0x00000345, CPU_PMC, CPU_C2_AT },
- { 0x00000360, 0x00000371, CPU_PMC, CPU_INTEL_XEON },
- { 0x0000038D, 0x00000390, CPU_PMC, CPU_C2_AT },
- { 0x000003A0, 0x000003BE, CPU_PMC, CPU_INTEL_XEON },
- { 0x000003C0, 0x000003CD, CPU_PMC, CPU_INTEL_XEON },
- { 0x000003E0, 0x000003E1, CPU_PMC, CPU_INTEL_XEON },
- { 0x000003F0, 0x000003F0, CPU_PMC, CPU_INTEL_XEON },
- { 0x000003F1, 0x000003F1, CPU_PMC, CPU_C2_AT_XE },
- { 0x000003F2, 0x000003F2, CPU_PMC, CPU_INTEL_XEON },
-
- { 0x00000400, 0x00000402, CPU_MC, CPU_PM_CX_AT_XE },
- { 0x00000403, 0x00000403, CPU_MC, CPU_INTEL_XEON },
- { 0x00000404, 0x00000406, CPU_MC, CPU_PM_CX_AT_XE },
- { 0x00000407, 0x00000407, CPU_MC, CPU_INTEL_XEON },
- { 0x00000408, 0x0000040A, CPU_MC, CPU_PM_CX_AT_XE },
- { 0x0000040B, 0x0000040B, CPU_MC, CPU_INTEL_XEON },
- { 0x0000040C, 0x0000040E, CPU_MC, CPU_PM_CX_XE },
- { 0x0000040F, 0x0000040F, CPU_MC, CPU_INTEL_XEON },
- { 0x00000410, 0x00000412, CPU_MC, CPU_PM_CX_AT_XE },
- { 0x00000413, 0x00000417, CPU_MC, CPU_CX_AT_XE },
- { 0x00000480, 0x0000048B, CPU_VMX, CPU_CX_AT_XE },
-
- { 0x00000600, 0x00000600, CPU_DEBUG, CPU_PM_CX_AT_XE },
- { 0x00000680, 0x0000068F, CPU_LBRANCH, CPU_INTEL_XEON },
- { 0x000006C0, 0x000006CF, CPU_LBRANCH, CPU_INTEL_XEON },
-
- { 0x000107CC, 0x000107D3, CPU_PMC, CPU_INTEL_XEON_MP },
-
- { 0xC0000080, 0xC0000080, CPU_FEATURES, CPU_INTEL_XEON },
- { 0xC0000081, 0xC0000082, CPU_CALL, CPU_INTEL_XEON },
- { 0xC0000084, 0xC0000084, CPU_CALL, CPU_INTEL_XEON },
- { 0xC0000100, 0xC0000102, CPU_BASE, CPU_INTEL_XEON },
+/* CPU Registers Range */
+static struct cpu_debug_range cpu_reg_range[] = {
+ { 0x00000000, 0x00000001, CPU_MC, },
+ { 0x00000006, 0x00000007, CPU_MONITOR, },
+ { 0x00000010, 0x00000010, CPU_TIME, },
+ { 0x00000011, 0x00000013, CPU_PMC, },
+ { 0x00000017, 0x00000017, CPU_PLATFORM, },
+ { 0x0000001B, 0x0000001B, CPU_APIC, },
+ { 0x0000002A, 0x0000002B, CPU_POWERON, },
+ { 0x0000002C, 0x0000002C, CPU_FREQ, },
+ { 0x0000003A, 0x0000003A, CPU_CONTROL, },
+ { 0x00000040, 0x00000047, CPU_LBRANCH, },
+ { 0x00000060, 0x00000067, CPU_LBRANCH, },
+ { 0x00000079, 0x00000079, CPU_BIOS, },
+ { 0x00000088, 0x0000008A, CPU_CACHE, },
+ { 0x0000008B, 0x0000008B, CPU_BIOS, },
+ { 0x0000009B, 0x0000009B, CPU_MONITOR, },
+ { 0x000000C1, 0x000000C4, CPU_PMC, },
+ { 0x000000CD, 0x000000CD, CPU_FREQ, },
+ { 0x000000E7, 0x000000E8, CPU_PERF, },
+ { 0x000000FE, 0x000000FE, CPU_MTRR, },
+
+ { 0x00000116, 0x0000011E, CPU_CACHE, },
+ { 0x00000174, 0x00000176, CPU_SYSENTER, },
+ { 0x00000179, 0x0000017B, CPU_MC, },
+ { 0x00000186, 0x00000189, CPU_PMC, },
+ { 0x00000198, 0x00000199, CPU_PERF, },
+ { 0x0000019A, 0x0000019A, CPU_TIME, },
+ { 0x0000019B, 0x0000019D, CPU_THERM, },
+ { 0x000001A0, 0x000001A0, CPU_MISC, },
+ { 0x000001C9, 0x000001C9, CPU_LBRANCH, },
+ { 0x000001D7, 0x000001D8, CPU_LBRANCH, },
+ { 0x000001D9, 0x000001D9, CPU_DEBUG, },
+ { 0x000001DA, 0x000001E0, CPU_LBRANCH, },
+
+ { 0x00000200, 0x0000020F, CPU_MTRR, },
+ { 0x00000250, 0x00000250, CPU_MTRR, },
+ { 0x00000258, 0x00000259, CPU_MTRR, },
+ { 0x00000268, 0x0000026F, CPU_MTRR, },
+ { 0x00000277, 0x00000277, CPU_PAT, },
+ { 0x000002FF, 0x000002FF, CPU_MTRR, },
+
+ { 0x00000300, 0x00000311, CPU_PMC, },
+ { 0x00000345, 0x00000345, CPU_PMC, },
+ { 0x00000360, 0x00000371, CPU_PMC, },
+ { 0x0000038D, 0x00000390, CPU_PMC, },
+ { 0x000003A0, 0x000003BE, CPU_PMC, },
+ { 0x000003C0, 0x000003CD, CPU_PMC, },
+ { 0x000003E0, 0x000003E1, CPU_PMC, },
+ { 0x000003F0, 0x000003F2, CPU_PMC, },
+
+ { 0x00000400, 0x00000417, CPU_MC, },
+ { 0x00000480, 0x0000048B, CPU_VMX, },
+
+ { 0x00000600, 0x00000600, CPU_DEBUG, },
+ { 0x00000680, 0x0000068F, CPU_LBRANCH, },
+ { 0x000006C0, 0x000006CF, CPU_LBRANCH, },
+
+ { 0x000107CC, 0x000107D3, CPU_PMC, },
+
+ { 0xC0000080, 0xC0000080, CPU_FEATURES, },
+ { 0xC0000081, 0xC0000084, CPU_CALL, },
+ { 0xC0000100, 0xC0000102, CPU_BASE, },
+ { 0xC0000103, 0xC0000103, CPU_TIME, },
+
+ { 0xC0010000, 0xC0010007, CPU_PMC, },
+ { 0xC0010010, 0xC0010010, CPU_CONF, },
+ { 0xC0010015, 0xC0010015, CPU_CONF, },
+ { 0xC0010016, 0xC001001A, CPU_MTRR, },
+ { 0xC001001D, 0xC001001D, CPU_MTRR, },
+ { 0xC001001F, 0xC001001F, CPU_CONF, },
+ { 0xC0010030, 0xC0010035, CPU_BIOS, },
+ { 0xC0010044, 0xC0010048, CPU_MC, },
+ { 0xC0010050, 0xC0010056, CPU_SMM, },
+ { 0xC0010058, 0xC0010058, CPU_CONF, },
+ { 0xC0010060, 0xC0010060, CPU_CACHE, },
+ { 0xC0010061, 0xC0010068, CPU_SMM, },
+ { 0xC0010069, 0xC001006B, CPU_SMM, },
+ { 0xC0010070, 0xC0010071, CPU_SMM, },
+ { 0xC0010111, 0xC0010113, CPU_SMM, },
+ { 0xC0010114, 0xC0010118, CPU_SVM, },
+ { 0xC0010140, 0xC0010141, CPU_OSVM, },
+ { 0xC0011022, 0xC0011023, CPU_CONF, },
};
-/* AMD Registers Range */
-static struct cpu_debug_range cpu_amd_range[] = {
- { 0x00000000, 0x00000001, CPU_MC, CPU_K10_PLUS, },
- { 0x00000010, 0x00000010, CPU_TIME, CPU_K8_PLUS, },
- { 0x0000001B, 0x0000001B, CPU_APIC, CPU_K8_PLUS, },
- { 0x0000002A, 0x0000002A, CPU_POWERON, CPU_K7_PLUS },
- { 0x0000008B, 0x0000008B, CPU_VER, CPU_K8_PLUS },
- { 0x000000FE, 0x000000FE, CPU_MTRR, CPU_K8_PLUS, },
-
- { 0x00000174, 0x00000176, CPU_SYSENTER, CPU_K8_PLUS, },
- { 0x00000179, 0x0000017B, CPU_MC, CPU_K8_PLUS, },
- { 0x000001D9, 0x000001D9, CPU_DEBUG, CPU_K8_PLUS, },
- { 0x000001DB, 0x000001DE, CPU_LBRANCH, CPU_K8_PLUS, },
-
- { 0x00000200, 0x0000020F, CPU_MTRR, CPU_K8_PLUS, },
- { 0x00000250, 0x00000250, CPU_MTRR, CPU_K8_PLUS, },
- { 0x00000258, 0x00000259, CPU_MTRR, CPU_K8_PLUS, },
- { 0x00000268, 0x0000026F, CPU_MTRR, CPU_K8_PLUS, },
- { 0x00000277, 0x00000277, CPU_PAT, CPU_K8_PLUS, },
- { 0x000002FF, 0x000002FF, CPU_MTRR, CPU_K8_PLUS, },
-
- { 0x00000400, 0x00000413, CPU_MC, CPU_K8_PLUS, },
-
- { 0xC0000080, 0xC0000080, CPU_FEATURES, CPU_AMD_ALL, },
- { 0xC0000081, 0xC0000084, CPU_CALL, CPU_K8_PLUS, },
- { 0xC0000100, 0xC0000102, CPU_BASE, CPU_K8_PLUS, },
- { 0xC0000103, 0xC0000103, CPU_TIME, CPU_K10_PLUS, },
-
- { 0xC0010000, 0xC0010007, CPU_PMC, CPU_K8_PLUS, },
- { 0xC0010010, 0xC0010010, CPU_CONF, CPU_K7_PLUS, },
- { 0xC0010015, 0xC0010015, CPU_CONF, CPU_K7_PLUS, },
- { 0xC0010016, 0xC001001A, CPU_MTRR, CPU_K8_PLUS, },
- { 0xC001001D, 0xC001001D, CPU_MTRR, CPU_K8_PLUS, },
- { 0xC001001F, 0xC001001F, CPU_CONF, CPU_K8_PLUS, },
- { 0xC0010030, 0xC0010035, CPU_BIOS, CPU_K8_PLUS, },
- { 0xC0010044, 0xC0010048, CPU_MC, CPU_K8_PLUS, },
- { 0xC0010050, 0xC0010056, CPU_SMM, CPU_K0F_PLUS, },
- { 0xC0010058, 0xC0010058, CPU_CONF, CPU_K10_PLUS, },
- { 0xC0010060, 0xC0010060, CPU_CACHE, CPU_AMD_11, },
- { 0xC0010061, 0xC0010068, CPU_SMM, CPU_K10_PLUS, },
- { 0xC0010069, 0xC001006B, CPU_SMM, CPU_AMD_11, },
- { 0xC0010070, 0xC0010071, CPU_SMM, CPU_K10_PLUS, },
- { 0xC0010111, 0xC0010113, CPU_SMM, CPU_K8_PLUS, },
- { 0xC0010114, 0xC0010118, CPU_SVM, CPU_K10_PLUS, },
- { 0xC0010140, 0xC0010141, CPU_OSVM, CPU_K10_PLUS, },
- { 0xC0011022, 0xC0011023, CPU_CONF, CPU_K10_PLUS, },
-};
-
-
-/* Intel */
-static int get_intel_modelflag(unsigned model)
-{
- int flag;
-
- switch (model) {
- case 0x0501:
- case 0x0502:
- case 0x0504:
- flag = CPU_INTEL_PENTIUM;
- break;
- case 0x0601:
- case 0x0603:
- case 0x0605:
- case 0x0607:
- case 0x0608:
- case 0x060A:
- case 0x060B:
- flag = CPU_INTEL_P6;
- break;
- case 0x0609:
- case 0x060D:
- flag = CPU_INTEL_PENTIUM_M;
- break;
- case 0x060E:
- flag = CPU_INTEL_CORE;
- break;
- case 0x060F:
- case 0x0617:
- flag = CPU_INTEL_CORE2;
- break;
- case 0x061C:
- flag = CPU_INTEL_ATOM;
- break;
- case 0x0F00:
- case 0x0F01:
- case 0x0F02:
- case 0x0F03:
- case 0x0F04:
- flag = CPU_INTEL_XEON_P4;
- break;
- case 0x0F06:
- flag = CPU_INTEL_XEON_MP;
- break;
- default:
- flag = CPU_NONE;
- break;
- }
-
- return flag;
-}
-
-/* AMD */
-static int get_amd_modelflag(unsigned model)
-{
- int flag;
-
- switch (model >> 8) {
- case 0x6:
- flag = CPU_AMD_K6;
- break;
- case 0x7:
- flag = CPU_AMD_K7;
- break;
- case 0x8:
- flag = CPU_AMD_K8;
- break;
- case 0xf:
- flag = CPU_AMD_0F;
- break;
- case 0x10:
- flag = CPU_AMD_10;
- break;
- case 0x11:
- flag = CPU_AMD_11;
- break;
- default:
- flag = CPU_NONE;
- break;
- }
-
- return flag;
-}
-
-static int get_cpu_modelflag(unsigned cpu)
-{
- int flag;
-
- flag = per_cpu(cpu_model, cpu);
-
- switch (flag >> 16) {
- case X86_VENDOR_INTEL:
- flag = get_intel_modelflag(flag);
- break;
- case X86_VENDOR_AMD:
- flag = get_amd_modelflag(flag & 0xffff);
- break;
- default:
- flag = CPU_NONE;
- break;
- }
-
- return flag;
-}
-
-static int get_cpu_range_count(unsigned cpu)
-{
- int index;
-
- switch (per_cpu(cpu_model, cpu) >> 16) {
- case X86_VENDOR_INTEL:
- index = ARRAY_SIZE(cpu_intel_range);
- break;
- case X86_VENDOR_AMD:
- index = ARRAY_SIZE(cpu_amd_range);
- break;
- default:
- index = 0;
- break;
- }
-
- return index;
-}
-
static int is_typeflag_valid(unsigned cpu, unsigned flag)
{
- unsigned vendor, modelflag;
- int i, index;
+ int i;
/* Standard Registers should be always valid */
if (flag >= CPU_TSS)
return 1;
- modelflag = per_cpu(cpu_modelflag, cpu);
- vendor = per_cpu(cpu_model, cpu) >> 16;
- index = get_cpu_range_count(cpu);
-
- for (i = 0; i < index; i++) {
- switch (vendor) {
- case X86_VENDOR_INTEL:
- if ((cpu_intel_range[i].model & modelflag) &&
- (cpu_intel_range[i].flag & flag))
- return 1;
- break;
- case X86_VENDOR_AMD:
- if ((cpu_amd_range[i].model & modelflag) &&
- (cpu_amd_range[i].flag & flag))
- return 1;
- break;
- }
+ for (i = 0; i < ARRAY_SIZE(cpu_reg_range); i++) {
+ if (cpu_reg_range[i].flag == flag)
+ return 1;
}
/* Invalid */
static unsigned get_cpu_range(unsigned cpu, unsigned *min, unsigned *max,
int index, unsigned flag)
{
- unsigned modelflag;
-
- modelflag = per_cpu(cpu_modelflag, cpu);
- *max = 0;
- switch (per_cpu(cpu_model, cpu) >> 16) {
- case X86_VENDOR_INTEL:
- if ((cpu_intel_range[index].model & modelflag) &&
- (cpu_intel_range[index].flag & flag)) {
- *min = cpu_intel_range[index].min;
- *max = cpu_intel_range[index].max;
- }
- break;
- case X86_VENDOR_AMD:
- if ((cpu_amd_range[index].model & modelflag) &&
- (cpu_amd_range[index].flag & flag)) {
- *min = cpu_amd_range[index].min;
- *max = cpu_amd_range[index].max;
- }
- break;
- }
+ if (cpu_reg_range[index].flag == flag) {
+ *min = cpu_reg_range[index].min;
+ *max = cpu_reg_range[index].max;
+ } else
+ *max = 0;
return *max;
}
unsigned msr, msr_min, msr_max;
struct cpu_private *priv;
u32 low, high;
- int i, range;
+ int i;
if (seq) {
priv = seq->private;
}
}
- range = get_cpu_range_count(cpu);
-
- for (i = 0; i < range; i++) {
+ for (i = 0; i < ARRAY_SIZE(cpu_reg_range); i++) {
if (!get_cpu_range(cpu, &msr_min, &msr_max, i, flag))
continue;
seq_printf(seq, " TMICT\t\t: %08x\n", apic_read(APIC_TMICT));
seq_printf(seq, " TMCCT\t\t: %08x\n", apic_read(APIC_TMCCT));
seq_printf(seq, " TDCR\t\t: %08x\n", apic_read(APIC_TDCR));
-#endif /* CONFIG_X86_LOCAL_APIC */
+ if (boot_cpu_has(X86_FEATURE_EXTAPIC)) {
+ unsigned int i, v, maxeilvt;
+
+ v = apic_read(APIC_EFEAT);
+ maxeilvt = (v >> 16) & 0xff;
+ seq_printf(seq, " EFEAT\t\t: %08x\n", v);
+ seq_printf(seq, " ECTRL\t\t: %08x\n", apic_read(APIC_ECTRL));
+ for (i = 0; i < maxeilvt; i++) {
+ v = apic_read(APIC_EILVTn(i));
+ seq_printf(seq, " EILVT%d\t\t: %08x\n", i, v);
+ }
+ }
+#endif /* CONFIG_X86_LOCAL_APIC */
seq_printf(seq, "\n MSR\t:\n");
}
{
struct dentry *cpu_dentry = NULL;
unsigned reg, reg_min, reg_max;
- int i, range, err = 0;
+ int i, err = 0;
char reg_dir[12];
u32 low, high;
- range = get_cpu_range_count(cpu);
-
- for (i = 0; i < range; i++) {
+ for (i = 0; i < ARRAY_SIZE(cpu_reg_range); i++) {
if (!get_cpu_range(cpu, ®_min, ®_max, i,
cpu_base[type].flag))
continue;
cpui = &cpu_data(cpu);
if (!cpu_has(cpui, X86_FEATURE_MSR))
continue;
- per_cpu(cpu_model, cpu) = ((cpui->x86_vendor << 16) |
- (cpui->x86 << 8) |
- (cpui->x86_model));
- per_cpu(cpu_modelflag, cpu) = get_cpu_modelflag(cpu);
sprintf(cpu_dir, "cpu%d", cpu);
cpu_dentry = debugfs_create_dir(cpu_dir, cpu_debugfs_dir);
If in doubt, say N.
config X86_E_POWERSAVER
- tristate "VIA C7 Enhanced PowerSaver"
+ tristate "VIA C7 Enhanced PowerSaver (DANGEROUS)"
select CPU_FREQ_TABLE
- depends on X86_32
+ depends on X86_32 && EXPERIMENTAL
help
- This adds the CPUFreq driver for VIA C7 processors.
+ This adds the CPUFreq driver for VIA C7 processors. However, this driver
+ does not have any safeguards to prevent operating the CPU out of spec
+ and is thus considered dangerous. Please use the regular ACPI cpufreq
+ driver, enabled by CONFIG_X86_ACPI_CPUFREQ.
If in doubt, say N.
{
struct cpuinfo_x86 *cpu = &cpu_data(cpuid);
- if (cpu->x86_vendor != X86_VENDOR_INTEL ||
- !cpu_has(cpu, X86_FEATURE_EST))
- return 0;
-
- return 1;
+ return cpu_has(cpu, X86_FEATURE_EST);
}
static unsigned extract_io(u32 value, struct acpi_cpufreq_data *data)
return -ENOMEM;
}
for_each_possible_cpu(i) {
- if (!alloc_cpumask_var_node(
+ if (!zalloc_cpumask_var_node(
&per_cpu_ptr(acpi_perf_data, i)->shared_cpu_map,
GFP_KERNEL, cpu_to_node(i))) {
if (perf->control_register.space_id == ACPI_ADR_SPACE_FIXED_HARDWARE &&
policy->cpuinfo.transition_latency > 20 * 1000) {
policy->cpuinfo.transition_latency = 20 * 1000;
- printk_once(KERN_INFO "Capping off P-state tranision"
- " latency at 20 uS\n");
+ printk_once(KERN_INFO
+ "P-state transition latency capped at 20 uS\n");
}
/* table init */
goto err0;
}
- if (!alloc_cpumask_var(&acpi_processor_perf->shared_cpu_map,
+ if (!zalloc_cpumask_var(&acpi_processor_perf->shared_cpu_map,
GFP_KERNEL)) {
retval = -ENOMEM;
goto err05;
{
struct cpufreq_frequency_table *powernow_table;
int ret_val = -ENODEV;
- acpi_integer space_id;
+ acpi_integer control, status;
if (acpi_processor_register_performance(&data->acpi_data, data->cpu)) {
dprintk("register performance failed: bad ACPI data\n");
goto err_out;
}
- space_id = data->acpi_data.control_register.space_id;
- if ((space_id != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
- (space_id != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
+ control = data->acpi_data.control_register.space_id;
+ status = data->acpi_data.status_register.space_id;
+
+ if ((control != ACPI_ADR_SPACE_FIXED_HARDWARE) ||
+ (status != ACPI_ADR_SPACE_FIXED_HARDWARE)) {
dprintk("Invalid control/status registers (%x - %x)\n",
- data->acpi_data.control_register.space_id,
- space_id);
+ control, status);
goto err_out;
}
/* notify BIOS that we exist */
acpi_processor_notify_smm(THIS_MODULE);
- if (!alloc_cpumask_var(&data->acpi_data.shared_cpu_map, GFP_KERNEL)) {
+ if (!zalloc_cpumask_var(&data->acpi_data.shared_cpu_map, GFP_KERNEL)) {
printk(KERN_ERR PFX
"unable to alloc powernow_k8_data cpumask\n");
ret_val = -ENOMEM;
if (unlikely(!alloc_cpumask_var(&saved_mask, GFP_KERNEL)))
return -ENOMEM;
- if (unlikely(!alloc_cpumask_var(&covered_cpus, GFP_KERNEL))) {
+ if (unlikely(!zalloc_cpumask_var(&covered_cpus, GFP_KERNEL))) {
free_cpumask_var(saved_mask);
return -ENOMEM;
}
}
#endif
-static void __cpuinit srat_detect_node(void)
+static void __cpuinit srat_detect_node(struct cpuinfo_x86 *c)
{
#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
unsigned node;
int cpu = smp_processor_id();
- int apicid = hard_smp_processor_id();
+ int apicid = cpu_has_apic ? hard_smp_processor_id() : c->apicid;
/* Don't do the funky fallback heuristics the AMD version employs
for now. */
}
/* Work around errata */
- srat_detect_node();
+ srat_detect_node(c);
if (cpu_has(c, X86_FEATURE_VMX))
detect_vmx_virtcap(c);
#include <asm/processor.h>
#include <asm/smp.h>
+#include <asm/k8.h>
#define LVL_1_INST 1
#define LVL_1_DATA 2
unsigned long can_disable;
};
-#if defined(CONFIG_PCI) && defined(CONFIG_SYSFS)
-static struct pci_device_id k8_nb_id[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1103) },
- { PCI_DEVICE(PCI_VENDOR_ID_AMD, 0x1203) },
- {}
-};
-#endif
-
unsigned short num_cache_leaves;
/* AMD doesn't have CPUID4. Emulate it here to report the same
};
static const unsigned short __cpuinitconst assocs[] = {
- [1] = 1, [2] = 2, [4] = 4, [6] = 8,
- [8] = 16, [0xa] = 32, [0xb] = 48,
+ [1] = 1,
+ [2] = 2,
+ [4] = 4,
+ [6] = 8,
+ [8] = 16,
+ [0xa] = 32,
+ [0xb] = 48,
[0xc] = 64,
- [0xf] = 0xffff // ??
+ [0xd] = 96,
+ [0xe] = 128,
+ [0xf] = 0xffff /* fully associative - no way to show this currently */
};
static const unsigned char __cpuinitconst levels[] = { 1, 1, 2, 3 };
eax->split.type = types[leaf];
eax->split.level = levels[leaf];
if (leaf == 3)
- eax->split.num_threads_sharing = current_cpu_data.x86_max_cores - 1;
+ eax->split.num_threads_sharing =
+ current_cpu_data.x86_max_cores - 1;
else
eax->split.num_threads_sharing = 0;
eax->split.num_cores_on_die = current_cpu_data.x86_max_cores - 1;
{
if (index < 3)
return;
+
+ if (boot_cpu_data.x86 == 0x11)
+ return;
+
+ /* see erratum #382 */
+ if ((boot_cpu_data.x86 == 0x10) && (boot_cpu_data.x86_model < 0x8))
+ return;
+
this_leaf->can_disable = 1;
}
#define to_object(k) container_of(k, struct _index_kobject, kobj)
#define to_attr(a) container_of(a, struct _cache_attr, attr)
-#ifdef CONFIG_PCI
-static struct pci_dev *get_k8_northbridge(int node)
-{
- struct pci_dev *dev = NULL;
- int i;
-
- for (i = 0; i <= node; i++) {
- do {
- dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev);
- if (!dev)
- break;
- } while (!pci_match_id(&k8_nb_id[0], dev));
- if (!dev)
- break;
- }
- return dev;
-}
-#else
-static struct pci_dev *get_k8_northbridge(int node)
-{
- return NULL;
-}
-#endif
-
-static ssize_t show_cache_disable(struct _cpuid4_info *this_leaf, char *buf)
+static ssize_t show_cache_disable(struct _cpuid4_info *this_leaf, char *buf,
+ unsigned int index)
{
- const struct cpumask *mask = to_cpumask(this_leaf->shared_cpu_map);
- int node = cpu_to_node(cpumask_first(mask));
- struct pci_dev *dev = NULL;
- ssize_t ret = 0;
- int i;
+ int cpu = cpumask_first(to_cpumask(this_leaf->shared_cpu_map));
+ int node = cpu_to_node(cpu);
+ struct pci_dev *dev = node_to_k8_nb_misc(node);
+ unsigned int reg = 0;
if (!this_leaf->can_disable)
- return sprintf(buf, "Feature not enabled\n");
-
- dev = get_k8_northbridge(node);
- if (!dev) {
- printk(KERN_ERR "Attempting AMD northbridge operation on a system with no northbridge\n");
return -EINVAL;
- }
- for (i = 0; i < 2; i++) {
- unsigned int reg;
+ if (!dev)
+ return -EINVAL;
- pci_read_config_dword(dev, 0x1BC + i * 4, ®);
+ pci_read_config_dword(dev, 0x1BC + index * 4, ®);
+ return sprintf(buf, "%x\n", reg);
+}
- ret += sprintf(buf, "%sEntry: %d\n", buf, i);
- ret += sprintf(buf, "%sReads: %s\tNew Entries: %s\n",
- buf,
- reg & 0x80000000 ? "Disabled" : "Allowed",
- reg & 0x40000000 ? "Disabled" : "Allowed");
- ret += sprintf(buf, "%sSubCache: %x\tIndex: %x\n",
- buf, (reg & 0x30000) >> 16, reg & 0xfff);
- }
- return ret;
+#define SHOW_CACHE_DISABLE(index) \
+static ssize_t \
+show_cache_disable_##index(struct _cpuid4_info *this_leaf, char *buf) \
+{ \
+ return show_cache_disable(this_leaf, buf, index); \
}
+SHOW_CACHE_DISABLE(0)
+SHOW_CACHE_DISABLE(1)
-static ssize_t
-store_cache_disable(struct _cpuid4_info *this_leaf, const char *buf,
- size_t count)
+static ssize_t store_cache_disable(struct _cpuid4_info *this_leaf,
+ const char *buf, size_t count, unsigned int index)
{
- const struct cpumask *mask = to_cpumask(this_leaf->shared_cpu_map);
- int node = cpu_to_node(cpumask_first(mask));
- struct pci_dev *dev = NULL;
- unsigned int ret, index, val;
+ int cpu = cpumask_first(to_cpumask(this_leaf->shared_cpu_map));
+ int node = cpu_to_node(cpu);
+ struct pci_dev *dev = node_to_k8_nb_misc(node);
+ unsigned long val = 0;
+ unsigned int scrubber = 0;
if (!this_leaf->can_disable)
- return 0;
-
- if (strlen(buf) > 15)
return -EINVAL;
- ret = sscanf(buf, "%x %x", &index, &val);
- if (ret != 2)
+ if (!capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ if (!dev)
return -EINVAL;
- if (index > 1)
+
+ if (strict_strtoul(buf, 10, &val) < 0)
return -EINVAL;
val |= 0xc0000000;
- dev = get_k8_northbridge(node);
- if (!dev) {
- printk(KERN_ERR "Attempting AMD northbridge operation on a system with no northbridge\n");
- return -EINVAL;
- }
+
+ pci_read_config_dword(dev, 0x58, &scrubber);
+ scrubber &= ~0x1f000000;
+ pci_write_config_dword(dev, 0x58, scrubber);
pci_write_config_dword(dev, 0x1BC + index * 4, val & ~0x40000000);
wbinvd();
pci_write_config_dword(dev, 0x1BC + index * 4, val);
+ return count;
+}
- return 1;
+#define STORE_CACHE_DISABLE(index) \
+static ssize_t \
+store_cache_disable_##index(struct _cpuid4_info *this_leaf, \
+ const char *buf, size_t count) \
+{ \
+ return store_cache_disable(this_leaf, buf, count, index); \
}
+STORE_CACHE_DISABLE(0)
+STORE_CACHE_DISABLE(1)
struct _cache_attr {
struct attribute attr;
define_one_ro(shared_cpu_map);
define_one_ro(shared_cpu_list);
-static struct _cache_attr cache_disable = __ATTR(cache_disable, 0644, show_cache_disable, store_cache_disable);
+static struct _cache_attr cache_disable_0 = __ATTR(cache_disable_0, 0644,
+ show_cache_disable_0, store_cache_disable_0);
+static struct _cache_attr cache_disable_1 = __ATTR(cache_disable_1, 0644,
+ show_cache_disable_1, store_cache_disable_1);
static struct attribute * default_attrs[] = {
&type.attr,
&size.attr,
&shared_cpu_map.attr,
&shared_cpu_list.attr,
- &cache_disable.attr,
+ &cache_disable_0.attr,
+ &cache_disable_1.attr,
NULL
};
if (!mce_available(&boot_cpu_data))
return -EIO;
- alloc_cpumask_var(&mce_device_initialized, GFP_KERNEL);
+ zalloc_cpumask_var(&mce_device_initialized, GFP_KERNEL);
err = mce_init_banks();
if (err)
#include <asm/hw_irq.h>
#include <asm/idle.h>
#include <asm/therm_throt.h>
-#include <asm/apic.h>
asmlinkage void smp_thermal_interrupt(void)
{
if (!is_cpu(INTEL) || enable_mtrr_cleanup < 1)
return 0;
- rdmsr(MTRRdefType_MSR, def, dummy);
+ rdmsr(MSR_MTRRdefType, def, dummy);
def &= 0xff;
if (def != MTRR_TYPE_UNCACHABLE)
return 0;
*/
if (!is_cpu(INTEL) || disable_mtrr_trim)
return 0;
- rdmsr(MTRRdefType_MSR, def, dummy);
+ rdmsr(MSR_MTRRdefType, def, dummy);
def &= 0xff;
if (def != MTRR_TYPE_UNCACHABLE)
return 0;
};
static struct fixed_range_block fixed_range_blocks[] = {
- { MTRRfix64K_00000_MSR, 1 }, /* one 64k MTRR */
- { MTRRfix16K_80000_MSR, 2 }, /* two 16k MTRRs */
- { MTRRfix4K_C0000_MSR, 8 }, /* eight 4k MTRRs */
+ { MSR_MTRRfix64K_00000, 1 }, /* one 64k MTRR */
+ { MSR_MTRRfix16K_80000, 2 }, /* two 16k MTRRs */
+ { MSR_MTRRfix4K_C0000, 8 }, /* eight 4k MTRRs */
{}
};
k8_check_syscfg_dram_mod_en();
- rdmsr(MTRRfix64K_00000_MSR, p[0], p[1]);
+ rdmsr(MSR_MTRRfix64K_00000, p[0], p[1]);
for (i = 0; i < 2; i++)
- rdmsr(MTRRfix16K_80000_MSR + i, p[2 + i * 2], p[3 + i * 2]);
+ rdmsr(MSR_MTRRfix16K_80000 + i, p[2 + i * 2], p[3 + i * 2]);
for (i = 0; i < 8; i++)
- rdmsr(MTRRfix4K_C0000_MSR + i, p[6 + i * 2], p[7 + i * 2]);
+ rdmsr(MSR_MTRRfix4K_C0000 + i, p[6 + i * 2], p[7 + i * 2]);
}
void mtrr_save_fixed_ranges(void *info)
vrs = mtrr_state.var_ranges;
- rdmsr(MTRRcap_MSR, lo, dummy);
+ rdmsr(MSR_MTRRcap, lo, dummy);
mtrr_state.have_fixed = (lo >> 8) & 1;
for (i = 0; i < num_var_ranges; i++)
if (mtrr_state.have_fixed)
get_fixed_ranges(mtrr_state.fixed_ranges);
- rdmsr(MTRRdefType_MSR, lo, dummy);
+ rdmsr(MSR_MTRRdefType, lo, dummy);
mtrr_state.def_type = (lo & 0xff);
mtrr_state.enabled = (lo & 0xc00) >> 10;
__flush_tlb();
/* Save MTRR state */
- rdmsr(MTRRdefType_MSR, deftype_lo, deftype_hi);
+ rdmsr(MSR_MTRRdefType, deftype_lo, deftype_hi);
/* Disable MTRRs, and set the default type to uncached */
- mtrr_wrmsr(MTRRdefType_MSR, deftype_lo & ~0xcff, deftype_hi);
+ mtrr_wrmsr(MSR_MTRRdefType, deftype_lo & ~0xcff, deftype_hi);
}
static void post_set(void) __releases(set_atomicity_lock)
__flush_tlb();
/* Intel (P6) standard MTRRs */
- mtrr_wrmsr(MTRRdefType_MSR, deftype_lo, deftype_hi);
+ mtrr_wrmsr(MSR_MTRRdefType, deftype_lo, deftype_hi);
/* Enable caches */
write_cr0(read_cr0() & 0xbfffffff);
static int generic_have_wrcomb(void)
{
unsigned long config, dummy;
- rdmsr(MTRRcap_MSR, config, dummy);
+ rdmsr(MSR_MTRRcap, config, dummy);
return (config & (1 << 10));
}
unsigned long config = 0, dummy;
if (use_intel()) {
- rdmsr(MTRRcap_MSR, config, dummy);
+ rdmsr(MSR_MTRRcap, config, dummy);
} else if (is_cpu(AMD))
config = 2;
else if (is_cpu(CYRIX) || is_cpu(CENTAUR))
#include <linux/types.h>
#include <linux/stddef.h>
-#define MTRRcap_MSR 0x0fe
-#define MTRRdefType_MSR 0x2ff
-
-#define MTRRfix64K_00000_MSR 0x250
-#define MTRRfix16K_80000_MSR 0x258
-#define MTRRfix16K_A0000_MSR 0x259
-#define MTRRfix4K_C0000_MSR 0x268
-#define MTRRfix4K_C8000_MSR 0x269
-#define MTRRfix4K_D0000_MSR 0x26a
-#define MTRRfix4K_D8000_MSR 0x26b
-#define MTRRfix4K_E0000_MSR 0x26c
-#define MTRRfix4K_E8000_MSR 0x26d
-#define MTRRfix4K_F0000_MSR 0x26e
-#define MTRRfix4K_F8000_MSR 0x26f
-
#define MTRR_CHANGE_MASK_FIXED 0x01
#define MTRR_CHANGE_MASK_VARIABLE 0x02
#define MTRR_CHANGE_MASK_DEFTYPE 0x04
if (use_intel())
/* Save MTRR state */
- rdmsr(MTRRdefType_MSR, ctxt->deftype_lo, ctxt->deftype_hi);
+ rdmsr(MSR_MTRRdefType, ctxt->deftype_lo, ctxt->deftype_hi);
else
/* Cyrix ARRs - everything else were excluded at the top */
ctxt->ccr3 = getCx86(CX86_CCR3);
{
if (use_intel())
/* Disable MTRRs, and set the default type to uncached */
- mtrr_wrmsr(MTRRdefType_MSR, ctxt->deftype_lo & 0xf300UL,
+ mtrr_wrmsr(MSR_MTRRdefType, ctxt->deftype_lo & 0xf300UL,
ctxt->deftype_hi);
else if (is_cpu(CYRIX))
/* Cyrix ARRs - everything else were excluded at the top */
/* Restore MTRRdefType */
if (use_intel())
/* Intel (P6) standard MTRRs */
- mtrr_wrmsr(MTRRdefType_MSR, ctxt->deftype_lo, ctxt->deftype_hi);
+ mtrr_wrmsr(MSR_MTRRdefType, ctxt->deftype_lo, ctxt->deftype_hi);
else
/* Cyrix ARRs - everything else was excluded at the top */
setCx86(CX86_CCR3, ctxt->ccr3);
unsigned long *sp, unsigned long bp, char *log_lvl);
extern unsigned int code_bytes;
-extern int kstack_depth_to_print;
/* The form of the top of the frame on the stack */
struct stack_frame {
*/
__init void e820_setup_gap(void)
{
- unsigned long gapstart, gapsize, round;
+ unsigned long gapstart, gapsize;
int found;
gapstart = 0x10000000;
#endif
/*
- * See how much we want to round up: start off with
- * rounding to the next 1MB area.
+ * e820_reserve_resources_late protect stolen RAM already
*/
- round = 0x100000;
- while ((gapsize >> 4) > round)
- round += round;
- /* Fun with two's complement */
- pci_mem_start = (gapstart + round) & -round;
+ pci_mem_start = gapstart;
printk(KERN_INFO
"Allocating PCI resources starting at %lx (gap: %lx:%lx)\n",
}
}
+/* How much should we pad RAM ending depending on where it is? */
+static unsigned long ram_alignment(resource_size_t pos)
+{
+ unsigned long mb = pos >> 20;
+
+ /* To 64kB in the first megabyte */
+ if (!mb)
+ return 64*1024;
+
+ /* To 1MB in the first 16MB */
+ if (mb < 16)
+ return 1024*1024;
+
+ /* To 32MB for anything above that */
+ return 32*1024*1024;
+}
+
void __init e820_reserve_resources_late(void)
{
int i;
insert_resource_expand_to_fit(&iomem_resource, res);
res++;
}
+
+ /*
+ * Try to bump up RAM regions to reasonable boundaries to
+ * avoid stolen RAM:
+ */
+ for (i = 0; i < e820.nr_map; i++) {
+ struct e820entry *entry = &e820_saved.map[i];
+ resource_size_t start, end;
+
+ if (entry->type != E820_RAM)
+ continue;
+ start = entry->addr + entry->size;
+ end = round_up(start, ram_alignment(start));
+ if (start == end)
+ continue;
+ reserve_region_with_split(&iomem_resource, start,
+ end - 1, "RAM buffer");
+ }
}
char *__init default_machine_specific_memory_setup(void)
}
+#if defined(CONFIG_ACPI) && defined(CONFIG_X86_IO_APIC)
#if defined(CONFIG_ACPI) && defined(CONFIG_X86_IO_APIC)
static u32 __init ati_ixp4x0_rev(int num, int slot, int func)
{
d &= 0xff;
return d;
}
+#endif
static void __init ati_bugs(int num, int slot, int func)
{
ENTRY(initial_code)
.long i386_start_kernel
-.section .text
-/*
- * Real beginning of normal "text" segment
- */
-ENTRY(stext)
-ENTRY(_stext)
-
/*
* BSS section
*/
#include <asm/io_apic.h>
#include <asm/irq.h>
#include <asm/idle.h>
+#include <asm/hw_irq.h>
atomic_t irq_err_count;
*/
void ack_bad_irq(unsigned int irq)
{
- printk(KERN_ERR "unexpected IRQ trap at vector %02x\n", irq);
+ if (printk_ratelimit())
+ pr_err("unexpected IRQ trap at vector %02x\n", irq);
-#ifdef CONFIG_X86_LOCAL_APIC
/*
* Currently unexpected vectors happen only on SMP and APIC.
* We _must_ ack these because every local APIC has only N
* completely.
* But only ack when the APIC is enabled -AK
*/
- if (cpu_has_apic)
- ack_APIC_irq();
-#endif
+ ack_APIC_irq();
}
#define irq_stats(x) (&per_cpu(irq_stat, x))
sum += irq_stats(cpu)->irq_thermal_count;
# ifdef CONFIG_X86_64
sum += irq_stats(cpu)->irq_threshold_count;
-#endif
+# endif
#endif
return sum;
}
irq = __get_cpu_var(vector_irq)[vector];
if (!handle_irq(irq, regs)) {
-#ifdef CONFIG_X86_64
- if (!disable_apic)
- ack_APIC_irq();
-#endif
+ ack_APIC_irq();
if (printk_ratelimit())
- printk(KERN_EMERG "%s: %d.%d No irq handler for vector (irq %d)\n",
- __func__, smp_processor_id(), vector, irq);
+ pr_emerg("%s: %d.%d No irq handler for vector (irq %d)\n",
+ __func__, smp_processor_id(), vector, irq);
}
irq_exit();
--- /dev/null
+#include <linux/linkage.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/ioport.h>
+#include <linux/interrupt.h>
+#include <linux/timex.h>
+#include <linux/slab.h>
+#include <linux/random.h>
+#include <linux/kprobes.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/sysdev.h>
+#include <linux/bitops.h>
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/delay.h>
+
+#include <asm/atomic.h>
+#include <asm/system.h>
+#include <asm/timer.h>
+#include <asm/hw_irq.h>
+#include <asm/pgtable.h>
+#include <asm/desc.h>
+#include <asm/apic.h>
+#include <asm/setup.h>
+#include <asm/i8259.h>
+#include <asm/traps.h>
+
+/*
+ * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
+ * (these are usually mapped to vectors 0x30-0x3f)
+ */
+
+/*
+ * The IO-APIC gives us many more interrupt sources. Most of these
+ * are unused but an SMP system is supposed to have enough memory ...
+ * sometimes (mostly wrt. hw bugs) we get corrupted vectors all
+ * across the spectrum, so we really want to be prepared to get all
+ * of these. Plus, more powerful systems might have more than 64
+ * IO-APIC registers.
+ *
+ * (these are usually mapped into the 0x30-0xff vector range)
+ */
+
+#ifdef CONFIG_X86_32
+/*
+ * Note that on a 486, we don't want to do a SIGFPE on an irq13
+ * as the irq is unreliable, and exception 16 works correctly
+ * (ie as explained in the intel literature). On a 386, you
+ * can't use exception 16 due to bad IBM design, so we have to
+ * rely on the less exact irq13.
+ *
+ * Careful.. Not only is IRQ13 unreliable, but it is also
+ * leads to races. IBM designers who came up with it should
+ * be shot.
+ */
+
+static irqreturn_t math_error_irq(int cpl, void *dev_id)
+{
+ outb(0, 0xF0);
+ if (ignore_fpu_irq || !boot_cpu_data.hard_math)
+ return IRQ_NONE;
+ math_error((void __user *)get_irq_regs()->ip);
+ return IRQ_HANDLED;
+}
+
+/*
+ * New motherboards sometimes make IRQ 13 be a PCI interrupt,
+ * so allow interrupt sharing.
+ */
+static struct irqaction fpu_irq = {
+ .handler = math_error_irq,
+ .name = "fpu",
+};
+#endif
+
+/*
+ * IRQ2 is cascade interrupt to second interrupt controller
+ */
+static struct irqaction irq2 = {
+ .handler = no_action,
+ .name = "cascade",
+};
+
+DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
+ [0 ... IRQ0_VECTOR - 1] = -1,
+ [IRQ0_VECTOR] = 0,
+ [IRQ1_VECTOR] = 1,
+ [IRQ2_VECTOR] = 2,
+ [IRQ3_VECTOR] = 3,
+ [IRQ4_VECTOR] = 4,
+ [IRQ5_VECTOR] = 5,
+ [IRQ6_VECTOR] = 6,
+ [IRQ7_VECTOR] = 7,
+ [IRQ8_VECTOR] = 8,
+ [IRQ9_VECTOR] = 9,
+ [IRQ10_VECTOR] = 10,
+ [IRQ11_VECTOR] = 11,
+ [IRQ12_VECTOR] = 12,
+ [IRQ13_VECTOR] = 13,
+ [IRQ14_VECTOR] = 14,
+ [IRQ15_VECTOR] = 15,
+ [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1
+};
+
+int vector_used_by_percpu_irq(unsigned int vector)
+{
+ int cpu;
+
+ for_each_online_cpu(cpu) {
+ if (per_cpu(vector_irq, cpu)[vector] != -1)
+ return 1;
+ }
+
+ return 0;
+}
+
+static void __init init_ISA_irqs(void)
+{
+ int i;
+
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
+ init_bsp_APIC();
+#endif
+ init_8259A(0);
+
+ /*
+ * 16 old-style INTA-cycle interrupts:
+ */
+ for (i = 0; i < NR_IRQS_LEGACY; i++) {
+ struct irq_desc *desc = irq_to_desc(i);
+
+ desc->status = IRQ_DISABLED;
+ desc->action = NULL;
+ desc->depth = 1;
+
+ set_irq_chip_and_handler_name(i, &i8259A_chip,
+ handle_level_irq, "XT");
+ }
+}
+
+/* Overridden in paravirt.c */
+void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
+
+static void __init smp_intr_init(void)
+{
+#ifdef CONFIG_SMP
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
+ /*
+ * The reschedule interrupt is a CPU-to-CPU reschedule-helper
+ * IPI, driven by wakeup.
+ */
+ alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
+
+ /* IPIs for invalidation */
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6);
+ alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7);
+
+ /* IPI for generic function call */
+ alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
+
+ /* IPI for generic single function call */
+ alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
+ call_function_single_interrupt);
+
+ /* Low priority IPI to cleanup after moving an irq */
+ set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
+ set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors);
+#endif
+#endif /* CONFIG_SMP */
+}
+
+static void __init apic_intr_init(void)
+{
+ smp_intr_init();
+
+#ifdef CONFIG_X86_64
+ alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
+ alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
+#endif
+
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_LOCAL_APIC)
+ /* self generated IPI for local APIC timer */
+ alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
+
+ /* generic IPI for platform specific use */
+ alloc_intr_gate(GENERIC_INTERRUPT_VECTOR, generic_interrupt);
+
+ /* IPI vectors for APIC spurious and error interrupts */
+ alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
+ alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
+
+ /* Performance monitoring interrupts: */
+# ifdef CONFIG_PERF_COUNTERS
+ alloc_intr_gate(LOCAL_PERF_VECTOR, perf_counter_interrupt);
+ alloc_intr_gate(LOCAL_PENDING_VECTOR, perf_pending_interrupt);
+# endif
+
+#endif
+
+#ifdef CONFIG_X86_32
+#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_MCE_P4THERMAL)
+ /* thermal monitor LVT interrupt */
+ alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
+#endif
+#endif
+}
+
+/**
+ * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors
+ *
+ * Description:
+ * Perform any necessary interrupt initialisation prior to setting up
+ * the "ordinary" interrupt call gates. For legacy reasons, the ISA
+ * interrupts should be initialised here if the machine emulates a PC
+ * in any way.
+ **/
+static void __init x86_quirk_pre_intr_init(void)
+{
+#ifdef CONFIG_X86_32
+ if (x86_quirks->arch_pre_intr_init) {
+ if (x86_quirks->arch_pre_intr_init())
+ return;
+ }
+#endif
+ init_ISA_irqs();
+}
+
+void __init native_init_IRQ(void)
+{
+ int i;
+
+ /* Execute any quirks before the call gates are initialised: */
+ x86_quirk_pre_intr_init();
+
+ apic_intr_init();
+
+ /*
+ * Cover the whole vector space, no vector can escape
+ * us. (some of these will be overridden and become
+ * 'special' SMP interrupts)
+ */
+ for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
+ /* IA32_SYSCALL_VECTOR could be used in trap_init already. */
+ if (!test_bit(i, used_vectors))
+ set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]);
+ }
+
+ if (!acpi_ioapic)
+ setup_irq(2, &irq2);
+
+#ifdef CONFIG_X86_32
+ /*
+ * Call quirks after call gates are initialised (usually add in
+ * the architecture specific gates):
+ */
+ x86_quirk_intr_init();
+
+ /*
+ * External FPU? Set up irq13 if so, for
+ * original braindamaged IBM FERR coupling.
+ */
+ if (boot_cpu_data.hard_math && !cpu_has_fpu)
+ setup_irq(FPU_IRQ, &fpu_irq);
+
+ irq_ctx_init(smp_processor_id());
+#endif
+}
+++ /dev/null
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sysdev.h>
-#include <linux/bitops.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-
-#include <asm/atomic.h>
-#include <asm/system.h>
-#include <asm/timer.h>
-#include <asm/pgtable.h>
-#include <asm/desc.h>
-#include <asm/apic.h>
-#include <asm/setup.h>
-#include <asm/i8259.h>
-#include <asm/traps.h>
-
-
-/*
- * Note that on a 486, we don't want to do a SIGFPE on an irq13
- * as the irq is unreliable, and exception 16 works correctly
- * (ie as explained in the intel literature). On a 386, you
- * can't use exception 16 due to bad IBM design, so we have to
- * rely on the less exact irq13.
- *
- * Careful.. Not only is IRQ13 unreliable, but it is also
- * leads to races. IBM designers who came up with it should
- * be shot.
- */
-
-static irqreturn_t math_error_irq(int cpl, void *dev_id)
-{
- outb(0, 0xF0);
- if (ignore_fpu_irq || !boot_cpu_data.hard_math)
- return IRQ_NONE;
- math_error((void __user *)get_irq_regs()->ip);
- return IRQ_HANDLED;
-}
-
-/*
- * New motherboards sometimes make IRQ 13 be a PCI interrupt,
- * so allow interrupt sharing.
- */
-static struct irqaction fpu_irq = {
- .handler = math_error_irq,
- .name = "fpu",
-};
-
-void __init init_ISA_irqs(void)
-{
- int i;
-
-#ifdef CONFIG_X86_LOCAL_APIC
- init_bsp_APIC();
-#endif
- init_8259A(0);
-
- /*
- * 16 old-style INTA-cycle interrupts:
- */
- for (i = 0; i < NR_IRQS_LEGACY; i++) {
- struct irq_desc *desc = irq_to_desc(i);
-
- desc->status = IRQ_DISABLED;
- desc->action = NULL;
- desc->depth = 1;
-
- set_irq_chip_and_handler_name(i, &i8259A_chip,
- handle_level_irq, "XT");
- }
-}
-
-/*
- * IRQ2 is cascade interrupt to second interrupt controller
- */
-static struct irqaction irq2 = {
- .handler = no_action,
- .name = "cascade",
-};
-
-DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
- [0 ... IRQ0_VECTOR - 1] = -1,
- [IRQ0_VECTOR] = 0,
- [IRQ1_VECTOR] = 1,
- [IRQ2_VECTOR] = 2,
- [IRQ3_VECTOR] = 3,
- [IRQ4_VECTOR] = 4,
- [IRQ5_VECTOR] = 5,
- [IRQ6_VECTOR] = 6,
- [IRQ7_VECTOR] = 7,
- [IRQ8_VECTOR] = 8,
- [IRQ9_VECTOR] = 9,
- [IRQ10_VECTOR] = 10,
- [IRQ11_VECTOR] = 11,
- [IRQ12_VECTOR] = 12,
- [IRQ13_VECTOR] = 13,
- [IRQ14_VECTOR] = 14,
- [IRQ15_VECTOR] = 15,
- [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1
-};
-
-int vector_used_by_percpu_irq(unsigned int vector)
-{
- int cpu;
-
- for_each_online_cpu(cpu) {
- if (per_cpu(vector_irq, cpu)[vector] != -1)
- return 1;
- }
-
- return 0;
-}
-
-/* Overridden in paravirt.c */
-void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
-
-void __init native_init_IRQ(void)
-{
- int i;
-
- /* Execute any quirks before the call gates are initialised: */
- x86_quirk_pre_intr_init();
-
- /*
- * Cover the whole vector space, no vector can escape
- * us. (some of these will be overridden and become
- * 'special' SMP interrupts)
- */
- for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
- /* SYSCALL_VECTOR was reserved in trap_init. */
- if (i != SYSCALL_VECTOR)
- set_intr_gate(i, interrupt[i-FIRST_EXTERNAL_VECTOR]);
- }
-
-
-#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_SMP)
- /*
- * The reschedule interrupt is a CPU-to-CPU reschedule-helper
- * IPI, driven by wakeup.
- */
- alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
-
- /* IPIs for invalidation */
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7);
-
- /* IPI for generic function call */
- alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
-
- /* IPI for single call function */
- alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
- call_function_single_interrupt);
-
- /* Low priority IPI to cleanup after moving an irq */
- set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
- set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors);
-#endif
-
-#ifdef CONFIG_X86_LOCAL_APIC
- /* self generated IPI for local APIC timer */
- alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
-
- /* generic IPI for platform specific use */
- alloc_intr_gate(GENERIC_INTERRUPT_VECTOR, generic_interrupt);
-
- /* IPI vectors for APIC spurious and error interrupts */
- alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
- alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
-#endif
-
-#if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_MCE_P4THERMAL)
- /* thermal monitor LVT interrupt */
- alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
-#endif
-
- if (!acpi_ioapic)
- setup_irq(2, &irq2);
-
- /*
- * Call quirks after call gates are initialised (usually add in
- * the architecture specific gates):
- */
- x86_quirk_intr_init();
-
- /*
- * External FPU? Set up irq13 if so, for
- * original braindamaged IBM FERR coupling.
- */
- if (boot_cpu_data.hard_math && !cpu_has_fpu)
- setup_irq(FPU_IRQ, &fpu_irq);
-
- irq_ctx_init(smp_processor_id());
-}
+++ /dev/null
-#include <linux/linkage.h>
-#include <linux/errno.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sysdev.h>
-#include <linux/bitops.h>
-#include <linux/acpi.h>
-#include <linux/io.h>
-#include <linux/delay.h>
-
-#include <asm/atomic.h>
-#include <asm/system.h>
-#include <asm/hw_irq.h>
-#include <asm/pgtable.h>
-#include <asm/desc.h>
-#include <asm/apic.h>
-#include <asm/i8259.h>
-
-/*
- * ISA PIC or low IO-APIC triggered (INTA-cycle or APIC) interrupts:
- * (these are usually mapped to vectors 0x30-0x3f)
- */
-
-/*
- * The IO-APIC gives us many more interrupt sources. Most of these
- * are unused but an SMP system is supposed to have enough memory ...
- * sometimes (mostly wrt. hw bugs) we get corrupted vectors all
- * across the spectrum, so we really want to be prepared to get all
- * of these. Plus, more powerful systems might have more than 64
- * IO-APIC registers.
- *
- * (these are usually mapped into the 0x30-0xff vector range)
- */
-
-/*
- * IRQ2 is cascade interrupt to second interrupt controller
- */
-
-static struct irqaction irq2 = {
- .handler = no_action,
- .name = "cascade",
-};
-DEFINE_PER_CPU(vector_irq_t, vector_irq) = {
- [0 ... IRQ0_VECTOR - 1] = -1,
- [IRQ0_VECTOR] = 0,
- [IRQ1_VECTOR] = 1,
- [IRQ2_VECTOR] = 2,
- [IRQ3_VECTOR] = 3,
- [IRQ4_VECTOR] = 4,
- [IRQ5_VECTOR] = 5,
- [IRQ6_VECTOR] = 6,
- [IRQ7_VECTOR] = 7,
- [IRQ8_VECTOR] = 8,
- [IRQ9_VECTOR] = 9,
- [IRQ10_VECTOR] = 10,
- [IRQ11_VECTOR] = 11,
- [IRQ12_VECTOR] = 12,
- [IRQ13_VECTOR] = 13,
- [IRQ14_VECTOR] = 14,
- [IRQ15_VECTOR] = 15,
- [IRQ15_VECTOR + 1 ... NR_VECTORS - 1] = -1
-};
-
-int vector_used_by_percpu_irq(unsigned int vector)
-{
- int cpu;
-
- for_each_online_cpu(cpu) {
- if (per_cpu(vector_irq, cpu)[vector] != -1)
- return 1;
- }
-
- return 0;
-}
-
-static void __init init_ISA_irqs(void)
-{
- int i;
-
- init_bsp_APIC();
- init_8259A(0);
-
- for (i = 0; i < NR_IRQS_LEGACY; i++) {
- struct irq_desc *desc = irq_to_desc(i);
-
- desc->status = IRQ_DISABLED;
- desc->action = NULL;
- desc->depth = 1;
-
- /*
- * 16 old-style INTA-cycle interrupts:
- */
- set_irq_chip_and_handler_name(i, &i8259A_chip,
- handle_level_irq, "XT");
- }
-}
-
-void init_IRQ(void) __attribute__((weak, alias("native_init_IRQ")));
-
-static void __init smp_intr_init(void)
-{
-#ifdef CONFIG_SMP
- /*
- * The reschedule interrupt is a CPU-to-CPU reschedule-helper
- * IPI, driven by wakeup.
- */
- alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt);
-
- /* IPIs for invalidation */
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6);
- alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7);
-
- /* IPI for generic function call */
- alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt);
-
- /* IPI for generic single function call */
- alloc_intr_gate(CALL_FUNCTION_SINGLE_VECTOR,
- call_function_single_interrupt);
-
- /* Low priority IPI to cleanup after moving an irq */
- set_intr_gate(IRQ_MOVE_CLEANUP_VECTOR, irq_move_cleanup_interrupt);
- set_bit(IRQ_MOVE_CLEANUP_VECTOR, used_vectors);
-#endif
-}
-
-static void __init apic_intr_init(void)
-{
- smp_intr_init();
-
- alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
- alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
-
- /* self generated IPI for local APIC timer */
- alloc_intr_gate(LOCAL_TIMER_VECTOR, apic_timer_interrupt);
-
- /* generic IPI for platform specific use */
- alloc_intr_gate(GENERIC_INTERRUPT_VECTOR, generic_interrupt);
-
- /* IPI vectors for APIC spurious and error interrupts */
- alloc_intr_gate(SPURIOUS_APIC_VECTOR, spurious_interrupt);
- alloc_intr_gate(ERROR_APIC_VECTOR, error_interrupt);
-}
-
-void __init native_init_IRQ(void)
-{
- int i;
-
- init_ISA_irqs();
- /*
- * Cover the whole vector space, no vector can escape
- * us. (some of these will be overridden and become
- * 'special' SMP interrupts)
- */
- for (i = 0; i < (NR_VECTORS - FIRST_EXTERNAL_VECTOR); i++) {
- int vector = FIRST_EXTERNAL_VECTOR + i;
- if (vector != IA32_SYSCALL_VECTOR)
- set_intr_gate(vector, interrupt[i]);
- }
-
- apic_intr_init();
-
- if (!acpi_ioapic)
- setup_irq(2, &irq2);
-}
gdb_regs32[GDB_PS] = *(unsigned long *)(p->thread.sp + 8);
gdb_regs32[GDB_CS] = __KERNEL_CS;
gdb_regs32[GDB_SS] = __KERNEL_DS;
- gdb_regs[GDB_PC] = p->thread.ip;
+ gdb_regs[GDB_PC] = 0;
gdb_regs[GDB_R8] = 0;
gdb_regs[GDB_R9] = 0;
gdb_regs[GDB_R10] = 0;
* Licensed under the terms of the GNU General Public
* License version 2. See file COPYING for details.
*/
-#include <linux/platform_device.h>
-#include <linux/capability.h>
-#include <linux/miscdevice.h>
#include <linux/firmware.h>
-#include <linux/spinlock.h>
-#include <linux/cpumask.h>
#include <linux/pci_ids.h>
#include <linux/uaccess.h>
#include <linux/vmalloc.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/cpu.h>
#include <linux/pci.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
#include <asm/microcode.h>
#include <asm/processor.h>
#define UCODE_CONTAINER_SECTION_HDR 8
#define UCODE_CONTAINER_HEADER_SIZE 12
-/* serialize access to the physical write */
-static DEFINE_SPINLOCK(microcode_update_lock);
-
static struct equiv_cpu_entry *equiv_cpu_table;
static int collect_cpu_info_amd(int cpu, struct cpu_signature *csig)
return 1;
}
-static void apply_microcode_amd(int cpu)
+static int apply_microcode_amd(int cpu)
{
- unsigned long flags;
u32 rev, dummy;
int cpu_num = raw_smp_processor_id();
struct ucode_cpu_info *uci = ucode_cpu_info + cpu_num;
BUG_ON(cpu_num != cpu);
if (mc_amd == NULL)
- return;
+ return 0;
- spin_lock_irqsave(µcode_update_lock, flags);
wrmsrl(MSR_AMD64_PATCH_LOADER, (u64)(long)&mc_amd->hdr.data_code);
/* get patch id after patching */
rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
- spin_unlock_irqrestore(µcode_update_lock, flags);
/* check current patch id and patch's id for match */
if (rev != mc_amd->hdr.patch_id) {
printk(KERN_ERR "microcode: CPU%d: update failed "
"(for patch_level=0x%x)\n", cpu, mc_amd->hdr.patch_id);
- return;
+ return -1;
}
printk(KERN_INFO "microcode: CPU%d: updated (new patch_level=0x%x)\n",
cpu, rev);
uci->cpu_sig.rev = rev;
+
+ return 0;
}
static int get_ucode_data(void *to, const u8 *from, size_t n)
static void free_equiv_cpu_table(void)
{
- if (equiv_cpu_table) {
- vfree(equiv_cpu_table);
- equiv_cpu_table = NULL;
- }
+ vfree(equiv_cpu_table);
+ equiv_cpu_table = NULL;
}
-static int generic_load_microcode(int cpu, const u8 *data, size_t size)
+static enum ucode_state
+generic_load_microcode(int cpu, const u8 *data, size_t size)
{
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
const u8 *ucode_ptr = data;
int new_rev = uci->cpu_sig.rev;
unsigned int leftover;
unsigned long offset;
+ enum ucode_state state = UCODE_OK;
offset = install_equiv_cpu_table(ucode_ptr);
if (!offset) {
printk(KERN_ERR "microcode: failed to create "
"equivalent cpu table\n");
- return -EINVAL;
+ return UCODE_ERROR;
}
ucode_ptr += offset;
mc_header = (struct microcode_header_amd *)mc;
if (get_matching_microcode(cpu, mc, new_rev)) {
- if (new_mc)
- vfree(new_mc);
+ vfree(new_mc);
new_rev = mc_header->patch_id;
new_mc = mc;
} else
if (new_mc) {
if (!leftover) {
- if (uci->mc)
- vfree(uci->mc);
+ vfree(uci->mc);
uci->mc = new_mc;
pr_debug("microcode: CPU%d found a matching microcode "
"update with version 0x%x (current=0x%x)\n",
cpu, new_rev, uci->cpu_sig.rev);
- } else
+ } else {
vfree(new_mc);
- }
+ state = UCODE_ERROR;
+ }
+ } else
+ state = UCODE_NFOUND;
free_equiv_cpu_table();
- return (int)leftover;
+ return state;
}
-static int request_microcode_fw(int cpu, struct device *device)
+static enum ucode_state request_microcode_fw(int cpu, struct device *device)
{
const char *fw_name = "amd-ucode/microcode_amd.bin";
const struct firmware *firmware;
- int ret;
-
- /* We should bind the task to the CPU */
- BUG_ON(cpu != raw_smp_processor_id());
+ enum ucode_state ret;
- ret = request_firmware(&firmware, fw_name, device);
- if (ret) {
+ if (request_firmware(&firmware, fw_name, device)) {
printk(KERN_ERR "microcode: failed to load file %s\n", fw_name);
- return ret;
+ return UCODE_NFOUND;
}
ret = generic_load_microcode(cpu, firmware->data, firmware->size);
return ret;
}
-static int request_microcode_user(int cpu, const void __user *buf, size_t size)
+static enum ucode_state
+request_microcode_user(int cpu, const void __user *buf, size_t size)
{
printk(KERN_INFO "microcode: AMD microcode update via "
"/dev/cpu/microcode not supported\n");
- return -1;
+ return UCODE_ERROR;
}
static void microcode_fini_cpu_amd(int cpu)
* Thanks to Stuart Swales for pointing out this bug.
*/
#include <linux/platform_device.h>
-#include <linux/capability.h>
#include <linux/miscdevice.h>
-#include <linux/firmware.h>
+#include <linux/capability.h>
#include <linux/smp_lock.h>
-#include <linux/spinlock.h>
-#include <linux/cpumask.h>
-#include <linux/uaccess.h>
-#include <linux/vmalloc.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mutex.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/slab.h>
#include <linux/cpu.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <asm/microcode.h>
#include <asm/processor.h>
-#include <asm/msr.h>
MODULE_DESCRIPTION("Microcode Update Driver");
MODULE_AUTHOR("Tigran Aivazian <tigran@aivazian.fsnet.co.uk>");
static struct microcode_ops *microcode_ops;
-/* no concurrent ->write()s are allowed on /dev/cpu/microcode */
+/*
+ * Synchronization.
+ *
+ * All non cpu-hotplug-callback call sites use:
+ *
+ * - microcode_mutex to synchronize with each other;
+ * - get/put_online_cpus() to synchronize with
+ * the cpu-hotplug-callback call sites.
+ *
+ * We guarantee that only a single cpu is being
+ * updated at any particular moment of time.
+ */
static DEFINE_MUTEX(microcode_mutex);
struct ucode_cpu_info ucode_cpu_info[NR_CPUS];
EXPORT_SYMBOL_GPL(ucode_cpu_info);
+/*
+ * Operations that are run on a target cpu:
+ */
+
+struct cpu_info_ctx {
+ struct cpu_signature *cpu_sig;
+ int err;
+};
+
+static void collect_cpu_info_local(void *arg)
+{
+ struct cpu_info_ctx *ctx = arg;
+
+ ctx->err = microcode_ops->collect_cpu_info(smp_processor_id(),
+ ctx->cpu_sig);
+}
+
+static int collect_cpu_info_on_target(int cpu, struct cpu_signature *cpu_sig)
+{
+ struct cpu_info_ctx ctx = { .cpu_sig = cpu_sig, .err = 0 };
+ int ret;
+
+ ret = smp_call_function_single(cpu, collect_cpu_info_local, &ctx, 1);
+ if (!ret)
+ ret = ctx.err;
+
+ return ret;
+}
+
+static int collect_cpu_info(int cpu)
+{
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+ int ret;
+
+ memset(uci, 0, sizeof(*uci));
+
+ ret = collect_cpu_info_on_target(cpu, &uci->cpu_sig);
+ if (!ret)
+ uci->valid = 1;
+
+ return ret;
+}
+
+struct apply_microcode_ctx {
+ int err;
+};
+
+static void apply_microcode_local(void *arg)
+{
+ struct apply_microcode_ctx *ctx = arg;
+
+ ctx->err = microcode_ops->apply_microcode(smp_processor_id());
+}
+
+static int apply_microcode_on_target(int cpu)
+{
+ struct apply_microcode_ctx ctx = { .err = 0 };
+ int ret;
+
+ ret = smp_call_function_single(cpu, apply_microcode_local, &ctx, 1);
+ if (!ret)
+ ret = ctx.err;
+
+ return ret;
+}
+
#ifdef CONFIG_MICROCODE_OLD_INTERFACE
static int do_microcode_update(const void __user *buf, size_t size)
{
- cpumask_t old;
int error = 0;
int cpu;
- old = current->cpus_allowed;
-
for_each_online_cpu(cpu) {
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+ enum ucode_state ustate;
if (!uci->valid)
continue;
- set_cpus_allowed_ptr(current, &cpumask_of_cpu(cpu));
- error = microcode_ops->request_microcode_user(cpu, buf, size);
- if (error < 0)
- goto out;
- if (!error)
- microcode_ops->apply_microcode(cpu);
+ ustate = microcode_ops->request_microcode_user(cpu, buf, size);
+ if (ustate == UCODE_ERROR) {
+ error = -1;
+ break;
+ } else if (ustate == UCODE_OK)
+ apply_microcode_on_target(cpu);
}
-out:
- set_cpus_allowed_ptr(current, &old);
+
return error;
}
static ssize_t microcode_write(struct file *file, const char __user *buf,
size_t len, loff_t *ppos)
{
- ssize_t ret;
+ ssize_t ret = -EINVAL;
if ((len >> PAGE_SHIFT) > num_physpages) {
- printk(KERN_ERR "microcode: too much data (max %ld pages)\n",
- num_physpages);
- return -EINVAL;
+ pr_err("microcode: too much data (max %ld pages)\n", num_physpages);
+ return ret;
}
get_online_cpus();
mutex_lock(µcode_mutex);
- ret = do_microcode_update(buf, len);
- if (!ret)
+ if (do_microcode_update(buf, len) == 0)
ret = (ssize_t)len;
mutex_unlock(µcode_mutex);
}
static const struct file_operations microcode_fops = {
- .owner = THIS_MODULE,
- .write = microcode_write,
- .open = microcode_open,
+ .owner = THIS_MODULE,
+ .write = microcode_write,
+ .open = microcode_open,
};
static struct miscdevice microcode_dev = {
- .minor = MICROCODE_MINOR,
- .name = "microcode",
- .fops = µcode_fops,
+ .minor = MICROCODE_MINOR,
+ .name = "microcode",
+ .fops = µcode_fops,
};
static int __init microcode_dev_init(void)
error = misc_register(µcode_dev);
if (error) {
- printk(KERN_ERR
- "microcode: can't misc_register on minor=%d\n",
- MICROCODE_MINOR);
+ pr_err("microcode: can't misc_register on minor=%d\n", MICROCODE_MINOR);
return error;
}
/* fake device for request_firmware */
static struct platform_device *microcode_pdev;
-static long reload_for_cpu(void *unused)
+static int reload_for_cpu(int cpu)
{
- struct ucode_cpu_info *uci = ucode_cpu_info + smp_processor_id();
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
int err = 0;
mutex_lock(µcode_mutex);
if (uci->valid) {
- err = microcode_ops->request_microcode_fw(smp_processor_id(),
- µcode_pdev->dev);
- if (!err)
- microcode_ops->apply_microcode(smp_processor_id());
+ enum ucode_state ustate;
+
+ ustate = microcode_ops->request_microcode_fw(cpu, µcode_pdev->dev);
+ if (ustate == UCODE_OK)
+ apply_microcode_on_target(cpu);
+ else
+ if (ustate == UCODE_ERROR)
+ err = -EINVAL;
}
mutex_unlock(µcode_mutex);
+
return err;
}
static ssize_t reload_store(struct sys_device *dev,
struct sysdev_attribute *attr,
- const char *buf, size_t sz)
+ const char *buf, size_t size)
{
- char *end;
- unsigned long val = simple_strtoul(buf, &end, 0);
- int err = 0;
+ unsigned long val;
int cpu = dev->id;
+ int ret = 0;
+ char *end;
+ val = simple_strtoul(buf, &end, 0);
if (end == buf)
return -EINVAL;
+
if (val == 1) {
get_online_cpus();
if (cpu_online(cpu))
- err = work_on_cpu(cpu, reload_for_cpu, NULL);
+ ret = reload_for_cpu(cpu);
put_online_cpus();
}
- if (err)
- return err;
- return sz;
+
+ if (!ret)
+ ret = size;
+
+ return ret;
}
static ssize_t version_show(struct sys_device *dev,
};
static struct attribute_group mc_attr_group = {
- .attrs = mc_default_attrs,
- .name = "microcode",
+ .attrs = mc_default_attrs,
+ .name = "microcode",
};
-static void __microcode_fini_cpu(int cpu)
+static void microcode_fini_cpu(int cpu)
{
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
uci->valid = 0;
}
-static void microcode_fini_cpu(int cpu)
-{
- mutex_lock(µcode_mutex);
- __microcode_fini_cpu(cpu);
- mutex_unlock(µcode_mutex);
-}
-
-static void collect_cpu_info(int cpu)
+static enum ucode_state microcode_resume_cpu(int cpu)
{
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
- memset(uci, 0, sizeof(*uci));
- if (!microcode_ops->collect_cpu_info(cpu, &uci->cpu_sig))
- uci->valid = 1;
+ if (!uci->mc)
+ return UCODE_NFOUND;
+
+ pr_debug("microcode: CPU%d updated upon resume\n", cpu);
+ apply_microcode_on_target(cpu);
+
+ return UCODE_OK;
}
-static int microcode_resume_cpu(int cpu)
+static enum ucode_state microcode_init_cpu(int cpu)
{
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
- struct cpu_signature nsig;
+ enum ucode_state ustate;
- pr_debug("microcode: CPU%d resumed\n", cpu);
+ if (collect_cpu_info(cpu))
+ return UCODE_ERROR;
- if (!uci->mc)
- return 1;
+ /* --dimm. Trigger a delayed update? */
+ if (system_state != SYSTEM_RUNNING)
+ return UCODE_NFOUND;
- /*
- * Let's verify that the 'cached' ucode does belong
- * to this cpu (a bit of paranoia):
- */
- if (microcode_ops->collect_cpu_info(cpu, &nsig)) {
- __microcode_fini_cpu(cpu);
- printk(KERN_ERR "failed to collect_cpu_info for resuming cpu #%d\n",
- cpu);
- return -1;
- }
+ ustate = microcode_ops->request_microcode_fw(cpu, µcode_pdev->dev);
- if ((nsig.sig != uci->cpu_sig.sig) || (nsig.pf != uci->cpu_sig.pf)) {
- __microcode_fini_cpu(cpu);
- printk(KERN_ERR "cached ucode doesn't match the resuming cpu #%d\n",
- cpu);
- /* Should we look for a new ucode here? */
- return 1;
+ if (ustate == UCODE_OK) {
+ pr_debug("microcode: CPU%d updated upon init\n", cpu);
+ apply_microcode_on_target(cpu);
}
- return 0;
+ return ustate;
}
-static long microcode_update_cpu(void *unused)
+static enum ucode_state microcode_update_cpu(int cpu)
{
- struct ucode_cpu_info *uci = ucode_cpu_info + smp_processor_id();
- int err = 0;
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
+ enum ucode_state ustate;
- /*
- * Check if the system resume is in progress (uci->valid != NULL),
- * otherwise just request a firmware:
- */
- if (uci->valid) {
- err = microcode_resume_cpu(smp_processor_id());
- } else {
- collect_cpu_info(smp_processor_id());
- if (uci->valid && system_state == SYSTEM_RUNNING)
- err = microcode_ops->request_microcode_fw(
- smp_processor_id(),
- µcode_pdev->dev);
- }
- if (!err)
- microcode_ops->apply_microcode(smp_processor_id());
- return err;
-}
+ if (uci->valid)
+ ustate = microcode_resume_cpu(cpu);
+ else
+ ustate = microcode_init_cpu(cpu);
-static int microcode_init_cpu(int cpu)
-{
- int err;
- mutex_lock(µcode_mutex);
- err = work_on_cpu(cpu, microcode_update_cpu, NULL);
- mutex_unlock(µcode_mutex);
-
- return err;
+ return ustate;
}
static int mc_sysdev_add(struct sys_device *sys_dev)
{
int err, cpu = sys_dev->id;
- struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
if (!cpu_online(cpu))
return 0;
pr_debug("microcode: CPU%d added\n", cpu);
- memset(uci, 0, sizeof(*uci));
err = sysfs_create_group(&sys_dev->kobj, &mc_attr_group);
if (err)
return err;
- err = microcode_init_cpu(cpu);
+ if (microcode_init_cpu(cpu) == UCODE_ERROR)
+ err = -EINVAL;
return err;
}
static int mc_sysdev_resume(struct sys_device *dev)
{
int cpu = dev->id;
+ struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
if (!cpu_online(cpu))
return 0;
- /* only CPU 0 will apply ucode here */
- microcode_update_cpu(NULL);
+ /*
+ * All non-bootup cpus are still disabled,
+ * so only CPU 0 will apply ucode here.
+ *
+ * Moreover, there can be no concurrent
+ * updates from any other places at this point.
+ */
+ WARN_ON(cpu != 0);
+
+ if (uci->valid && uci->mc)
+ microcode_ops->apply_microcode(cpu);
+
return 0;
}
static struct sysdev_driver mc_sysdev_driver = {
- .add = mc_sysdev_add,
- .remove = mc_sysdev_remove,
- .resume = mc_sysdev_resume,
+ .add = mc_sysdev_add,
+ .remove = mc_sysdev_remove,
+ .resume = mc_sysdev_resume,
};
static __cpuinit int
switch (action) {
case CPU_ONLINE:
case CPU_ONLINE_FROZEN:
- if (microcode_init_cpu(cpu))
- printk(KERN_ERR "microcode: failed to init CPU%d\n",
- cpu);
+ microcode_update_cpu(cpu);
case CPU_DOWN_FAILED:
case CPU_DOWN_FAILED_FROZEN:
pr_debug("microcode: CPU%d added\n", cpu);
if (sysfs_create_group(&sys_dev->kobj, &mc_attr_group))
- printk(KERN_ERR "microcode: Failed to create the sysfs "
- "group for CPU%d\n", cpu);
+ pr_err("microcode: Failed to create group for CPU%d\n", cpu);
break;
case CPU_DOWN_PREPARE:
case CPU_DOWN_PREPARE_FROZEN:
microcode_ops = init_amd_microcode();
if (!microcode_ops) {
- printk(KERN_ERR "microcode: no support for this CPU vendor\n");
+ pr_err("microcode: no support for this CPU vendor\n");
return -ENODEV;
}
- error = microcode_dev_init();
- if (error)
- return error;
microcode_pdev = platform_device_register_simple("microcode", -1,
NULL, 0);
if (IS_ERR(microcode_pdev)) {
}
get_online_cpus();
+ mutex_lock(µcode_mutex);
+
error = sysdev_driver_register(&cpu_sysdev_class, &mc_sysdev_driver);
+
+ mutex_unlock(µcode_mutex);
put_online_cpus();
+
if (error) {
- microcode_dev_exit();
platform_device_unregister(microcode_pdev);
return error;
}
+ error = microcode_dev_init();
+ if (error)
+ return error;
+
register_hotcpu_notifier(&mc_cpu_notifier);
- printk(KERN_INFO
- "Microcode Update Driver: v" MICROCODE_VERSION
+ pr_info("Microcode Update Driver: v" MICROCODE_VERSION
" <tigran@aivazian.fsnet.co.uk>,"
" Peter Oruba\n");
return 0;
}
+module_init(microcode_init);
static void __exit microcode_exit(void)
{
unregister_hotcpu_notifier(&mc_cpu_notifier);
get_online_cpus();
+ mutex_lock(µcode_mutex);
+
sysdev_driver_unregister(&cpu_sysdev_class, &mc_sysdev_driver);
+
+ mutex_unlock(µcode_mutex);
put_online_cpus();
platform_device_unregister(microcode_pdev);
microcode_ops = NULL;
- printk(KERN_INFO
- "Microcode Update Driver: v" MICROCODE_VERSION " removed.\n");
+ pr_info("Microcode Update Driver: v" MICROCODE_VERSION " removed.\n");
}
-
-module_init(microcode_init);
module_exit(microcode_exit);
* Fix sigmatch() macro to handle old CPUs with pf == 0.
* Thanks to Stuart Swales for pointing out this bug.
*/
-#include <linux/platform_device.h>
-#include <linux/capability.h>
-#include <linux/miscdevice.h>
#include <linux/firmware.h>
-#include <linux/smp_lock.h>
-#include <linux/spinlock.h>
-#include <linux/cpumask.h>
#include <linux/uaccess.h>
-#include <linux/vmalloc.h>
#include <linux/kernel.h>
#include <linux/module.h>
-#include <linux/mutex.h>
-#include <linux/sched.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/cpu.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
+#include <linux/vmalloc.h>
#include <asm/microcode.h>
#include <asm/processor.h>
#define exttable_size(et) ((et)->count * EXT_SIGNATURE_SIZE + EXT_HEADER_SIZE)
-/* serialize access to the physical write to MSR 0x79 */
-static DEFINE_SPINLOCK(microcode_update_lock);
-
static int collect_cpu_info(int cpu_num, struct cpu_signature *csig)
{
struct cpuinfo_x86 *c = &cpu_data(cpu_num);
- unsigned long flags;
unsigned int val[2];
memset(csig, 0, sizeof(*csig));
csig->pf = 1 << ((val[1] >> 18) & 7);
}
- /* serialize access to the physical write to MSR 0x79 */
- spin_lock_irqsave(µcode_update_lock, flags);
-
wrmsr(MSR_IA32_UCODE_REV, 0, 0);
/* see notes above for revision 1.07. Apparent chip bug */
sync_core();
/* get the current revision from MSR 0x8B */
rdmsr(MSR_IA32_UCODE_REV, val[0], csig->rev);
- spin_unlock_irqrestore(µcode_update_lock, flags);
- pr_debug("microcode: collect_cpu_info : sig=0x%x, pf=0x%x, rev=0x%x\n",
- csig->sig, csig->pf, csig->rev);
+ printk(KERN_INFO "microcode: CPU%d sig=0x%x, pf=0x%x, revision=0x%x\n",
+ cpu_num, csig->sig, csig->pf, csig->rev);
return 0;
}
return 0;
}
-static void apply_microcode(int cpu)
+static int apply_microcode(int cpu)
{
struct microcode_intel *mc_intel;
struct ucode_cpu_info *uci;
- unsigned long flags;
unsigned int val[2];
int cpu_num;
BUG_ON(cpu_num != cpu);
if (mc_intel == NULL)
- return;
-
- /* serialize access to the physical write to MSR 0x79 */
- spin_lock_irqsave(µcode_update_lock, flags);
+ return 0;
/* write microcode via MSR 0x79 */
wrmsr(MSR_IA32_UCODE_WRITE,
/* get the current revision from MSR 0x8B */
rdmsr(MSR_IA32_UCODE_REV, val[0], val[1]);
- spin_unlock_irqrestore(µcode_update_lock, flags);
if (val[1] != mc_intel->hdr.rev) {
- printk(KERN_ERR "microcode: CPU%d update from revision "
- "0x%x to 0x%x failed\n",
- cpu_num, uci->cpu_sig.rev, val[1]);
- return;
+ printk(KERN_ERR "microcode: CPU%d update "
+ "to revision 0x%x failed\n",
+ cpu_num, mc_intel->hdr.rev);
+ return -1;
}
- printk(KERN_INFO "microcode: CPU%d updated from revision "
- "0x%x to 0x%x, date = %04x-%02x-%02x \n",
- cpu_num, uci->cpu_sig.rev, val[1],
+ printk(KERN_INFO "microcode: CPU%d updated to revision "
+ "0x%x, date = %04x-%02x-%02x \n",
+ cpu_num, val[1],
mc_intel->hdr.date & 0xffff,
mc_intel->hdr.date >> 24,
(mc_intel->hdr.date >> 16) & 0xff);
uci->cpu_sig.rev = val[1];
+
+ return 0;
}
-static int generic_load_microcode(int cpu, void *data, size_t size,
- int (*get_ucode_data)(void *, const void *, size_t))
+static enum ucode_state generic_load_microcode(int cpu, void *data, size_t size,
+ int (*get_ucode_data)(void *, const void *, size_t))
{
struct ucode_cpu_info *uci = ucode_cpu_info + cpu;
u8 *ucode_ptr = data, *new_mc = NULL, *mc;
int new_rev = uci->cpu_sig.rev;
unsigned int leftover = size;
+ enum ucode_state state = UCODE_OK;
while (leftover) {
struct microcode_header_intel mc_header;
leftover -= mc_size;
}
- if (!new_mc)
+ if (leftover) {
+ if (new_mc)
+ vfree(new_mc);
+ state = UCODE_ERROR;
goto out;
+ }
- if (leftover) {
- vfree(new_mc);
+ if (!new_mc) {
+ state = UCODE_NFOUND;
goto out;
}
pr_debug("microcode: CPU%d found a matching microcode update with"
" version 0x%x (current=0x%x)\n",
cpu, new_rev, uci->cpu_sig.rev);
-
- out:
- return (int)leftover;
+out:
+ return state;
}
static int get_ucode_fw(void *to, const void *from, size_t n)
return 0;
}
-static int request_microcode_fw(int cpu, struct device *device)
+static enum ucode_state request_microcode_fw(int cpu, struct device *device)
{
char name[30];
struct cpuinfo_x86 *c = &cpu_data(cpu);
const struct firmware *firmware;
- int ret;
+ enum ucode_state ret;
- /* We should bind the task to the CPU */
- BUG_ON(cpu != raw_smp_processor_id());
sprintf(name, "intel-ucode/%02x-%02x-%02x",
c->x86, c->x86_model, c->x86_mask);
- ret = request_firmware(&firmware, name, device);
- if (ret) {
+
+ if (request_firmware(&firmware, name, device)) {
pr_debug("microcode: data file %s load failed\n", name);
- return ret;
+ return UCODE_NFOUND;
}
ret = generic_load_microcode(cpu, (void *)firmware->data,
return copy_from_user(to, from, n);
}
-static int request_microcode_user(int cpu, const void __user *buf, size_t size)
+static enum ucode_state
+request_microcode_user(int cpu, const void __user *buf, size_t size)
{
- /* We should bind the task to the CPU */
- BUG_ON(cpu != raw_smp_processor_id());
-
return generic_load_microcode(cpu, (void *)buf, size, &get_ucode_user);
}
#include <linux/acpi.h>
#include <linux/module.h>
#include <linux/smp.h>
+#include <linux/pci.h>
#include <asm/mtrr.h>
#include <asm/mpspec.h>
inline void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) {}
#endif /* CONFIG_X86_IO_APIC */
-static int check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length,
- int count)
+static int
+check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length, int count)
{
- if (!mpc_new_phys) {
- pr_info("No spare slots, try to append...take your risk, "
- "new mpc_length %x\n", count);
- } else {
- if (count <= mpc_new_length)
- pr_info("No spare slots, try to append..., "
- "new mpc_length %x\n", count);
- else {
- pr_err("mpc_new_length %lx is too small\n",
- mpc_new_length);
- return -1;
- }
+ int ret = 0;
+
+ if (!mpc_new_phys || count <= mpc_new_length) {
+ WARN(1, "update_mptable: No spare slots (length: %x)\n", count);
+ return -1;
}
- return 0;
+ return ret;
}
static int __init replace_intsrc_all(struct mpc_table *mpc,
} else {
struct mpc_intsrc *m = (struct mpc_intsrc *)mpt;
count += sizeof(struct mpc_intsrc);
- if (!check_slot(mpc_new_phys, mpc_new_length, count))
+ if (check_slot(mpc_new_phys, mpc_new_length, count) < 0)
goto out;
assign_to_mpc_intsrc(&mp_irqs[i], m);
mpc->length = count;
return 0;
}
-static int __initdata enable_update_mptable;
+int enable_update_mptable;
static int __init update_mptable_setup(char *str)
{
enable_update_mptable = 1;
+#ifdef CONFIG_PCI
+ pci_routeirq = 1;
+#endif
return 0;
}
early_param("update_mptable", update_mptable_setup);
static int __init parse_alloc_mptable_opt(char *p)
{
enable_update_mptable = 1;
+#ifdef CONFIG_PCI
+ pci_routeirq = 1;
+#endif
alloc_mptable = 1;
if (!p)
return 0;
#include <linux/module.h>
#include <linux/pm.h>
#include <linux/clockchips.h>
+#include <linux/random.h>
#include <trace/power.h>
#include <asm/system.h>
#include <asm/apic.h>
+#include <asm/syscalls.h>
#include <asm/idle.h>
#include <asm/uaccess.h>
#include <asm/i387.h>
}
early_param("idle", idle_setup);
+unsigned long arch_align_stack(unsigned long sp)
+{
+ if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space)
+ sp -= get_random_int() % 8192;
+ return sp & ~0xf;
+}
+
+unsigned long arch_randomize_brk(struct mm_struct *mm)
+{
+ unsigned long range_end = mm->brk + 0x02000000;
+ return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
+}
+
* This file handles the architecture-dependent parts of process handling..
*/
-#include <stdarg.h>
-
#include <linux/stackprotector.h>
#include <linux/cpu.h>
#include <linux/errno.h>
#include <linux/module.h>
#include <linux/kallsyms.h>
#include <linux/ptrace.h>
-#include <linux/random.h>
#include <linux/personality.h>
#include <linux/tick.h>
#include <linux/percpu.h>
return 0;
}
-unsigned long arch_align_stack(unsigned long sp)
-{
- if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space)
- sp -= get_random_int() % 8192;
- return sp & ~0xf;
-}
-
-unsigned long arch_randomize_brk(struct mm_struct *mm)
-{
- unsigned long range_end = mm->brk + 0x02000000;
- return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
-}
* This file handles the architecture-dependent parts of process handling..
*/
-#include <stdarg.h>
-
#include <linux/stackprotector.h>
#include <linux/cpu.h>
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/module.h>
#include <linux/ptrace.h>
-#include <linux/random.h>
#include <linux/notifier.h>
#include <linux/kprobes.h>
#include <linux/kdebug.h>
return do_arch_prctl(current, code, addr);
}
-unsigned long arch_align_stack(unsigned long sp)
-{
- if (!(current->personality & ADDR_NO_RANDOMIZE) && randomize_va_space)
- sp -= get_random_int() % 8192;
- return sp & ~0xf;
-}
-
-unsigned long arch_randomize_brk(struct mm_struct *mm)
-{
- unsigned long range_end = mm->brk + 0x02000000;
- return randomize_range(mm->brk, range_end, 0) ? : mm->brk;
-}
break;
}
}
+#endif
+
+#if defined(CONFIG_PCI) && defined(CONFIG_NUMA)
+/* Set correct numa_node information for AMD NB functions */
+static void __init quirk_amd_nb_node(struct pci_dev *dev)
+{
+ struct pci_dev *nb_ht;
+ unsigned int devfn;
+ u32 val;
+
+ devfn = PCI_DEVFN(PCI_SLOT(dev->devfn), 0);
+ nb_ht = pci_get_slot(dev->bus, devfn);
+ if (!nb_ht)
+ return;
+
+ pci_read_config_dword(nb_ht, 0x60, &val);
+ set_dev_node(&dev->dev, val & 7);
+ pci_dev_put(dev);
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB,
+ quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP,
+ quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MEMCTL,
+ quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_K8_NB_MISC,
+ quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_HT,
+ quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MAP,
+ quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_DRAM,
+ quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_MISC,
+ quirk_amd_nb_node);
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_10H_NB_LINK,
+ quirk_amd_nb_node);
#endif
DMI_MATCH(DMI_BOARD_NAME, "0KP561"),
},
},
+ { /* Handle problems with rebooting on Dell Optiplex 360 with 0T656F */
+ .callback = set_bios_reboot,
+ .ident = "Dell OptiPlex 360",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "OptiPlex 360"),
+ DMI_MATCH(DMI_BOARD_NAME, "0T656F"),
+ },
+ },
{ /* Handle problems with rebooting on Dell 2400's */
.callback = set_bios_reboot,
.ident = "Dell PowerEdge 2400",
#define ARCH_SETUP
#endif
+/*
+ * end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries.
+ * The direct mapping extends to max_pfn_mapped, so that we can directly access
+ * apertures, ACPI and other tables without having to play with fixmaps.
+ */
+unsigned long max_low_pfn_mapped;
+unsigned long max_pfn_mapped;
+
RESERVE_BRK(dmi_alloc, 65536);
unsigned int boot_cpu_id __read_mostly;
unsigned long mmu_cr4_features = X86_CR4_PAE;
#endif
-/* Boot loader ID as an integer, for the benefit of proc_dointvec */
-int bootloader_type;
+/* Boot loader ID and version as integers, for the benefit of proc_dointvec */
+int bootloader_type, bootloader_version;
/*
* Setup options
#endif
saved_video_mode = boot_params.hdr.vid_mode;
bootloader_type = boot_params.hdr.type_of_loader;
+ if ((bootloader_type >> 4) == 0xe) {
+ bootloader_type &= 0xf;
+ bootloader_type |= (boot_params.hdr.ext_loader_type+0x10) << 4;
+ }
+ bootloader_version = bootloader_type & 0xf;
+ bootloader_version |= boot_params.hdr.ext_loader_ver << 4;
#ifdef CONFIG_BLK_DEV_RAM
rd_image_start = boot_params.hdr.ram_size & RAMDISK_IMAGE_START_MASK;
max_low_pfn = max_pfn;
high_memory = (void *)__va(max_pfn * PAGE_SIZE - 1) + 1;
+ max_pfn_mapped = KERNEL_IMAGE_SIZE >> PAGE_SHIFT;
#endif
#ifdef CONFIG_X86_CHECK_BIOS_CORRUPTION
setup_bios_corruption_check();
#endif
+ printk(KERN_DEBUG "initial memory mapped : 0 - %08lx\n",
+ max_pfn_mapped<<PAGE_SHIFT);
+
reserve_brk();
/* max_pfn_mapped is updated here */
#ifdef CONFIG_X86_32
-/**
- * x86_quirk_pre_intr_init - initialisation prior to setting up interrupt vectors
- *
- * Description:
- * Perform any necessary interrupt initialisation prior to setting up
- * the "ordinary" interrupt call gates. For legacy reasons, the ISA
- * interrupts should be initialised here if the machine emulates a PC
- * in any way.
- **/
-void __init x86_quirk_pre_intr_init(void)
-{
- if (x86_quirks->arch_pre_intr_init) {
- if (x86_quirks->arch_pre_intr_init())
- return;
- }
- init_ISA_irqs();
-}
-
/**
* x86_quirk_intr_init - post gate setup interrupt initialisation
*
early_per_cpu_ptr(x86_cpu_to_node_map) = NULL;
#endif
+#if defined(CONFIG_X86_64) && defined(CONFIG_NUMA)
+ /*
+ * make sure boot cpu node_number is right, when boot cpu is on the
+ * node that doesn't have mem installed
+ */
+ per_cpu(node_number, boot_cpu_id) = cpu_to_node(boot_cpu_id);
+#endif
+
/* Setup node to cpumask map */
setup_node_to_cpumask_map();
}
struct smp_ops smp_ops = {
- .smp_prepare_boot_cpu = native_smp_prepare_boot_cpu,
- .smp_prepare_cpus = native_smp_prepare_cpus,
- .smp_cpus_done = native_smp_cpus_done,
+ .smp_prepare_boot_cpu = native_smp_prepare_boot_cpu,
+ .smp_prepare_cpus = native_smp_prepare_cpus,
+ .smp_cpus_done = native_smp_cpus_done,
- .smp_send_stop = native_smp_send_stop,
- .smp_send_reschedule = native_smp_send_reschedule,
+ .smp_send_stop = native_smp_send_stop,
+ .smp_send_reschedule = native_smp_send_reschedule,
- .cpu_up = native_cpu_up,
- .cpu_die = native_cpu_die,
- .cpu_disable = native_cpu_disable,
- .play_dead = native_play_dead,
+ .cpu_up = native_cpu_up,
+ .cpu_die = native_cpu_die,
+ .cpu_disable = native_cpu_disable,
+ .play_dead = native_play_dead,
- .send_call_func_ipi = native_send_call_func_ipi,
+ .send_call_func_ipi = native_send_call_func_ipi,
.send_call_func_single_ipi = native_send_call_func_single_ipi,
};
EXPORT_SYMBOL_GPL(smp_ops);
* INIT, INIT, STARTUP sequence will reset the chip hard for us, and this
* won't ... remember to clear down the APIC, etc later.
*/
-int __devinit
+int __cpuinit
wakeup_secondary_cpu_via_nmi(int logical_apicid, unsigned long start_eip)
{
unsigned long send_status, accept_status = 0;
return (send_status | accept_status);
}
-int __devinit
+static int __cpuinit
wakeup_secondary_cpu_via_init(int phys_apicid, unsigned long start_eip)
{
unsigned long send_status, accept_status = 0;
/* mark "stuck" area as not stuck */
*((volatile unsigned long *)trampoline_base) = 0;
- /*
- * Cleanup possible dangling ends...
- */
- smpboot_restore_warm_reset_vector();
+ if (get_uv_system_type() != UV_NON_UNIQUE_APIC) {
+ /*
+ * Cleanup possible dangling ends...
+ */
+ smpboot_restore_warm_reset_vector();
+ }
return boot_error;
}
*/
if (APIC_INTEGRATED(apic_version[boot_cpu_physical_apicid]) &&
!cpu_has_apic) {
- printk(KERN_ERR "BIOS bug, local APIC #%d not detected!...\n",
- boot_cpu_physical_apicid);
- printk(KERN_ERR "... forcing use of dummy APIC emulation."
+ if (!disable_apic) {
+ pr_err("BIOS bug, local APIC #%d not detected!...\n",
+ boot_cpu_physical_apicid);
+ pr_err("... forcing use of dummy APIC emulation."
"(tell your hw vendor)\n");
+ }
smpboot_clear_io_apic();
arch_disable_smp_support();
return -1;
struct bau_desc *adp;
struct bau_desc *ad2;
- adp = (struct bau_desc *)kmalloc_node(16384, GFP_KERNEL, node);
+ /*
+ * each bau_desc is 64 bytes; there are 8 (UV_ITEMS_PER_DESCRIPTOR)
+ * per cpu; and up to 32 (UV_ADP_SIZE) cpu's per blade
+ */
+ adp = (struct bau_desc *)kmalloc_node(sizeof(struct bau_desc)*
+ UV_ADP_SIZE*UV_ITEMS_PER_DESCRIPTOR, GFP_KERNEL, node);
BUG_ON(!adp);
pa = uv_gpa(adp); /* need the real nasid*/
(n << UV_DESC_BASE_PNODE_SHIFT | m));
}
- for (i = 0, ad2 = adp; i < UV_ACTIVATION_DESCRIPTOR_SIZE; i++, ad2++) {
+ /*
+ * initializing all 8 (UV_ITEMS_PER_DESCRIPTOR) descriptors for each
+ * cpu even though we only use the first one; one descriptor can
+ * describe a broadcast to 256 nodes.
+ */
+ for (i = 0, ad2 = adp; i < (UV_ADP_SIZE*UV_ITEMS_PER_DESCRIPTOR);
+ i++, ad2++) {
memset(ad2, 0, sizeof(struct bau_desc));
ad2->header.sw_ack_flag = 1;
/*
return 0;
for_each_possible_cpu(cur_cpu)
- alloc_cpumask_var_node(&per_cpu(uv_flush_tlb_mask, cur_cpu),
+ zalloc_cpumask_var_node(&per_cpu(uv_flush_tlb_mask, cur_cpu),
GFP_KERNEL, cpu_to_node(cur_cpu));
uv_bau_retry_limit = 1;
}
clts(); /* Allow maths ops (or we recurse) */
-#ifdef CONFIG_X86_32
- restore_fpu(tsk);
-#else
/*
* Paranoid restore. send a SIGSEGV if we fail to restore the state.
*/
force_sig(SIGSEGV, tsk);
return;
}
-#endif
+
thread->status |= TS_USEDFPU; /* So we fnsave on switch_to() */
tsk->fpu_counter++;
}
for (i = 0; i < FIRST_EXTERNAL_VECTOR; i++)
set_bit(i, used_vectors);
-#ifdef CONFIG_X86_64
set_bit(IA32_SYSCALL_VECTOR, used_vectors);
-#else
- set_bit(SYSCALL_VECTOR, used_vectors);
-#endif
+
/*
* Should be a barrier for any external CPU state:
*/
{
u64 tsc1, tsc2, delta, ref1, ref2;
unsigned long tsc_pit_min = ULONG_MAX, tsc_ref_min = ULONG_MAX;
- unsigned long flags, latch, ms, fast_calibrate, tsc_khz;
+ unsigned long flags, latch, ms, fast_calibrate, hv_tsc_khz;
int hpet = is_hpet_enabled(), i, loopmin;
- tsc_khz = get_hypervisor_tsc_freq();
- if (tsc_khz) {
+ hv_tsc_khz = get_hypervisor_tsc_freq();
+ if (hv_tsc_khz) {
printk(KERN_INFO "TSC: Frequency read from the hypervisor\n");
- return tsc_khz;
+ return hv_tsc_khz;
}
local_irq_save(flags);
* of a critical section, to be able to prove TSC time-warps:
*/
static __cpuinitdata raw_spinlock_t sync_lock = __RAW_SPIN_LOCK_UNLOCKED;
+
static __cpuinitdata cycles_t last_tsc;
static __cpuinitdata cycles_t max_warp;
static __cpuinitdata int nr_warps;
return;
if (boot_cpu_has(X86_FEATURE_TSC_RELIABLE)) {
- printk(KERN_INFO
- "Skipping synchronization checks as TSC is reliable.\n");
+ pr_info("Skipping synchronization checks as TSC is reliable.\n");
return;
}
- printk(KERN_INFO "checking TSC synchronization [CPU#%d -> CPU#%d]:",
- smp_processor_id(), cpu);
+ pr_info("checking TSC synchronization [CPU#%d -> CPU#%d]:",
+ smp_processor_id(), cpu);
/*
* Reset it - in case this is a second bootup:
if (nr_warps) {
printk("\n");
- printk(KERN_WARNING "Measured %Ld cycles TSC warp between CPUs,"
- " turning off TSC clock.\n", max_warp);
+ pr_warning("Measured %Ld cycles TSC warp between CPUs, "
+ "turning off TSC clock.\n", max_warp);
mark_tsc_unstable("check_tsc_sync_source failed");
} else {
printk(" passed.\n");
while (atomic_read(&stop_count) != cpus)
cpu_relax();
}
-#undef NR_LOOPS
-
info->regs.pt.ds = 0;
info->regs.pt.es = 0;
info->regs.pt.fs = 0;
-
-/* we are clearing gs later just before "jmp resume_userspace",
- * because it is not saved/restored.
- */
+#ifndef CONFIG_X86_32_LAZY_GS
+ info->regs.pt.gs = 0;
+#endif
/*
* The flags register is also special: we cannot trust that the user
}
/*
- * Save old state, set default return value (%ax) to 0
+ * Save old state, set default return value (%ax) to 0 (VM86_SIGNAL)
*/
- info->regs32->ax = 0;
+ info->regs32->ax = VM86_SIGNAL;
tsk->thread.saved_sp0 = tsk->thread.sp0;
tsk->thread.saved_fs = info->regs32->fs;
tsk->thread.saved_gs = get_user_gs(info->regs32);
__asm__ __volatile__(
"movl %0,%%esp\n\t"
"movl %1,%%ebp\n\t"
+#ifdef CONFIG_X86_32_LAZY_GS
"mov %2, %%gs\n\t"
+#endif
"jmp resume_userspace"
: /* no outputs */
:"r" (&info->regs), "r" (task_thread_info(tsk)), "r" (0));
+/*
+ * ld script for the x86 kernel
+ *
+ * Historic 32-bit version written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
+ *
+ * Modernisation, unification and other changes and fixes:
+ * Copyright (C) 2007-2009 Sam Ravnborg <sam@ravnborg.org>
+ *
+ *
+ * Don't define absolute symbols until and unless you know that symbol
+ * value is should remain constant even if kernel image is relocated
+ * at run time. Absolute symbols are not relocated. If symbol value should
+ * change if kernel is relocated, make the symbol section relative and
+ * put it inside the section definition.
+ */
+
#ifdef CONFIG_X86_32
-# include "vmlinux_32.lds.S"
+#define LOAD_OFFSET __PAGE_OFFSET
#else
-# include "vmlinux_64.lds.S"
+#define LOAD_OFFSET __START_KERNEL_map
#endif
+
+#include <asm-generic/vmlinux.lds.h>
+#include <asm/asm-offsets.h>
+#include <asm/thread_info.h>
+#include <asm/page_types.h>
+#include <asm/cache.h>
+#include <asm/boot.h>
+
+#undef i386 /* in case the preprocessor is a 32bit one */
+
+OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT)
+
+#ifdef CONFIG_X86_32
+OUTPUT_ARCH(i386)
+ENTRY(phys_startup_32)
+jiffies = jiffies_64;
+#else
+OUTPUT_ARCH(i386:x86-64)
+ENTRY(phys_startup_64)
+jiffies_64 = jiffies;
+#endif
+
+PHDRS {
+ text PT_LOAD FLAGS(5); /* R_E */
+ data PT_LOAD FLAGS(7); /* RWE */
+#ifdef CONFIG_X86_64
+ user PT_LOAD FLAGS(7); /* RWE */
+ data.init PT_LOAD FLAGS(7); /* RWE */
+#ifdef CONFIG_SMP
+ percpu PT_LOAD FLAGS(7); /* RWE */
+#endif
+ data.init2 PT_LOAD FLAGS(7); /* RWE */
+#endif
+ note PT_NOTE FLAGS(0); /* ___ */
+}
+
+SECTIONS
+{
+#ifdef CONFIG_X86_32
+ . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR;
+ phys_startup_32 = startup_32 - LOAD_OFFSET;
+#else
+ . = __START_KERNEL;
+ phys_startup_64 = startup_64 - LOAD_OFFSET;
+#endif
+
+ /* Text and read-only data */
+
+ /* bootstrapping code */
+ .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) {
+ _text = .;
+ *(.text.head)
+ } :text = 0x9090
+
+ /* The rest of the text */
+ .text : AT(ADDR(.text) - LOAD_OFFSET) {
+#ifdef CONFIG_X86_32
+ /* not really needed, already page aligned */
+ . = ALIGN(PAGE_SIZE);
+ *(.text.page_aligned)
+#endif
+ . = ALIGN(8);
+ _stext = .;
+ TEXT_TEXT
+ SCHED_TEXT
+ LOCK_TEXT
+ KPROBES_TEXT
+ IRQENTRY_TEXT
+ *(.fixup)
+ *(.gnu.warning)
+ /* End of text section */
+ _etext = .;
+ } :text = 0x9090
+
+ NOTES :text :note
+
+ /* Exception table */
+ . = ALIGN(16);
+ __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
+ __start___ex_table = .;
+ *(__ex_table)
+ __stop___ex_table = .;
+ } :text = 0x9090
+
+ RODATA
+
+ /* Data */
+ . = ALIGN(PAGE_SIZE);
+ .data : AT(ADDR(.data) - LOAD_OFFSET) {
+ DATA_DATA
+ CONSTRUCTORS
+
+#ifdef CONFIG_X86_64
+ /* End of data section */
+ _edata = .;
+#endif
+ } :data
+
+#ifdef CONFIG_X86_32
+ /* 32 bit has nosave before _edata */
+ . = ALIGN(PAGE_SIZE);
+ .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
+ __nosave_begin = .;
+ *(.data.nosave)
+ . = ALIGN(PAGE_SIZE);
+ __nosave_end = .;
+ }
+#endif
+
+ . = ALIGN(PAGE_SIZE);
+ .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
+ *(.data.page_aligned)
+ *(.data.idt)
+ }
+
+#ifdef CONFIG_X86_32
+ . = ALIGN(32);
+#else
+ . = ALIGN(PAGE_SIZE);
+ . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+#endif
+ .data.cacheline_aligned :
+ AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
+ *(.data.cacheline_aligned)
+ }
+
+ /* rarely changed data like cpu maps */
+#ifdef CONFIG_X86_32
+ . = ALIGN(32);
+#else
+ . = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES);
+#endif
+ .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
+ *(.data.read_mostly)
+
+#ifdef CONFIG_X86_32
+ /* End of data section */
+ _edata = .;
+#endif
+ }
+
+#ifdef CONFIG_X86_64
+
+#define VSYSCALL_ADDR (-10*1024*1024)
+#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + \
+ SIZEOF(.data.read_mostly) + 4095) & ~(4095))
+#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + \
+ SIZEOF(.data.read_mostly) + 4095) & ~(4095))
+
+#define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR)
+#define VLOAD(x) (ADDR(x) - VLOAD_OFFSET)
+
+#define VVIRT_OFFSET (VSYSCALL_ADDR - VSYSCALL_VIRT_ADDR)
+#define VVIRT(x) (ADDR(x) - VVIRT_OFFSET)
+
+ . = VSYSCALL_ADDR;
+ .vsyscall_0 : AT(VSYSCALL_PHYS_ADDR) {
+ *(.vsyscall_0)
+ } :user
+
+ __vsyscall_0 = VSYSCALL_VIRT_ADDR;
+
+ . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+ .vsyscall_fn : AT(VLOAD(.vsyscall_fn)) {
+ *(.vsyscall_fn)
+ }
+
+ . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+ .vsyscall_gtod_data : AT(VLOAD(.vsyscall_gtod_data)) {
+ *(.vsyscall_gtod_data)
+ }
+
+ vsyscall_gtod_data = VVIRT(.vsyscall_gtod_data);
+ .vsyscall_clock : AT(VLOAD(.vsyscall_clock)) {
+ *(.vsyscall_clock)
+ }
+ vsyscall_clock = VVIRT(.vsyscall_clock);
+
+
+ .vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1)) {
+ *(.vsyscall_1)
+ }
+ .vsyscall_2 ADDR(.vsyscall_0) + 2048: AT(VLOAD(.vsyscall_2)) {
+ *(.vsyscall_2)
+ }
+
+ .vgetcpu_mode : AT(VLOAD(.vgetcpu_mode)) {
+ *(.vgetcpu_mode)
+ }
+ vgetcpu_mode = VVIRT(.vgetcpu_mode);
+
+ . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
+ .jiffies : AT(VLOAD(.jiffies)) {
+ *(.jiffies)
+ }
+ jiffies = VVIRT(.jiffies);
+
+ .vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3)) {
+ *(.vsyscall_3)
+ }
+
+ . = VSYSCALL_VIRT_ADDR + PAGE_SIZE;
+
+#undef VSYSCALL_ADDR
+#undef VSYSCALL_PHYS_ADDR
+#undef VSYSCALL_VIRT_ADDR
+#undef VLOAD_OFFSET
+#undef VLOAD
+#undef VVIRT_OFFSET
+#undef VVIRT
+
+#endif /* CONFIG_X86_64 */
+
+ /* init_task */
+ . = ALIGN(THREAD_SIZE);
+ .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
+ *(.data.init_task)
+ }
+#ifdef CONFIG_X86_64
+ :data.init
+#endif
+
+ /*
+ * smp_locks might be freed after init
+ * start/end must be page aligned
+ */
+ . = ALIGN(PAGE_SIZE);
+ .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
+ __smp_locks = .;
+ *(.smp_locks)
+ __smp_locks_end = .;
+ . = ALIGN(PAGE_SIZE);
+ }
+
+ /* Init code and data - will be freed after init */
+ . = ALIGN(PAGE_SIZE);
+ .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
+ __init_begin = .; /* paired with __init_end */
+ _sinittext = .;
+ INIT_TEXT
+ _einittext = .;
+ }
+
+ .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
+ INIT_DATA
+ }
+
+ . = ALIGN(16);
+ .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
+ __setup_start = .;
+ *(.init.setup)
+ __setup_end = .;
+ }
+ .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
+ __initcall_start = .;
+ INITCALLS
+ __initcall_end = .;
+ }
+
+ .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
+ __con_initcall_start = .;
+ *(.con_initcall.init)
+ __con_initcall_end = .;
+ }
+
+ .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
+ __x86_cpu_dev_start = .;
+ *(.x86_cpu_dev.init)
+ __x86_cpu_dev_end = .;
+ }
+
+ SECURITY_INIT
+
+ . = ALIGN(8);
+ .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
+ __parainstructions = .;
+ *(.parainstructions)
+ __parainstructions_end = .;
+ }
+
+ . = ALIGN(8);
+ .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
+ __alt_instructions = .;
+ *(.altinstructions)
+ __alt_instructions_end = .;
+ }
+
+ .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
+ *(.altinstr_replacement)
+ }
+
+ /*
+ * .exit.text is discard at runtime, not link time, to deal with
+ * references from .altinstructions and .eh_frame
+ */
+ .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
+ EXIT_TEXT
+ }
+
+ .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
+ EXIT_DATA
+ }
+
+#ifdef CONFIG_BLK_DEV_INITRD
+ . = ALIGN(PAGE_SIZE);
+ .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
+ __initramfs_start = .;
+ *(.init.ramfs)
+ __initramfs_end = .;
+ }
+#endif
+
+#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
+ /*
+ * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the
+ * output PHDR, so the next output section - __data_nosave - should
+ * start another section data.init2. Also, pda should be at the head of
+ * percpu area. Preallocate it and define the percpu offset symbol
+ * so that it can be accessed as a percpu variable.
+ */
+ . = ALIGN(PAGE_SIZE);
+ PERCPU_VADDR(0, :percpu)
+#else
+ PERCPU(PAGE_SIZE)
+#endif
+
+ . = ALIGN(PAGE_SIZE);
+
+ /* freed after init ends here */
+ .init.end : AT(ADDR(.init.end) - LOAD_OFFSET) {
+ __init_end = .;
+ }
+
+#ifdef CONFIG_X86_64
+ .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
+ . = ALIGN(PAGE_SIZE);
+ __nosave_begin = .;
+ *(.data.nosave)
+ . = ALIGN(PAGE_SIZE);
+ __nosave_end = .;
+ } :data.init2
+ /* use another section data.init2, see PERCPU_VADDR() above */
+#endif
+
+ /* BSS */
+ . = ALIGN(PAGE_SIZE);
+ .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
+ __bss_start = .;
+ *(.bss.page_aligned)
+ *(.bss)
+ . = ALIGN(4);
+ __bss_stop = .;
+ }
+
+ . = ALIGN(PAGE_SIZE);
+ .brk : AT(ADDR(.brk) - LOAD_OFFSET) {
+ __brk_base = .;
+ . += 64 * 1024; /* 64k alignment slop space */
+ *(.brk_reservation) /* areas brk users have reserved */
+ __brk_limit = .;
+ }
+
+ .end : AT(ADDR(.end) - LOAD_OFFSET) {
+ _end = .;
+ }
+
+ /* Sections to be discarded */
+ /DISCARD/ : {
+ *(.exitcall.exit)
+ *(.eh_frame)
+ *(.discard)
+ }
+
+ STABS_DEBUG
+ DWARF_DEBUG
+}
+
+
+#ifdef CONFIG_X86_32
+ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
+ "kernel image bigger than KERNEL_IMAGE_SIZE")
+#else
+/*
+ * Per-cpu symbols which need to be offset from __per_cpu_load
+ * for the boot processor.
+ */
+#define INIT_PER_CPU(x) init_per_cpu__##x = per_cpu__##x + __per_cpu_load
+INIT_PER_CPU(gdt_page);
+INIT_PER_CPU(irq_stack_union);
+
+/*
+ * Build-time check on the image size:
+ */
+ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
+ "kernel image bigger than KERNEL_IMAGE_SIZE")
+
+#ifdef CONFIG_SMP
+ASSERT((per_cpu__irq_stack_union == 0),
+ "irq_stack_union is not at start of per-cpu area");
+#endif
+
+#endif /* CONFIG_X86_32 */
+
+#ifdef CONFIG_KEXEC
+#include <asm/kexec.h>
+
+ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
+ "kexec control code size is too big")
+#endif
+
+++ /dev/null
-/* ld script to make i386 Linux kernel
- * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>;
- *
- * Don't define absolute symbols until and unless you know that symbol
- * value is should remain constant even if kernel image is relocated
- * at run time. Absolute symbols are not relocated. If symbol value should
- * change if kernel is relocated, make the symbol section relative and
- * put it inside the section definition.
- */
-
-#define LOAD_OFFSET __PAGE_OFFSET
-
-#include <asm-generic/vmlinux.lds.h>
-#include <asm/thread_info.h>
-#include <asm/page_types.h>
-#include <asm/cache.h>
-#include <asm/boot.h>
-
-OUTPUT_FORMAT("elf32-i386", "elf32-i386", "elf32-i386")
-OUTPUT_ARCH(i386)
-ENTRY(phys_startup_32)
-jiffies = jiffies_64;
-
-PHDRS {
- text PT_LOAD FLAGS(5); /* R_E */
- data PT_LOAD FLAGS(7); /* RWE */
- note PT_NOTE FLAGS(0); /* ___ */
-}
-SECTIONS
-{
- . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR;
- phys_startup_32 = startup_32 - LOAD_OFFSET;
-
- .text.head : AT(ADDR(.text.head) - LOAD_OFFSET) {
- _text = .; /* Text and read-only data */
- *(.text.head)
- } :text = 0x9090
-
- /* read-only */
- .text : AT(ADDR(.text) - LOAD_OFFSET) {
- . = ALIGN(PAGE_SIZE); /* not really needed, already page aligned */
- *(.text.page_aligned)
- TEXT_TEXT
- SCHED_TEXT
- LOCK_TEXT
- KPROBES_TEXT
- IRQENTRY_TEXT
- *(.fixup)
- *(.gnu.warning)
- _etext = .; /* End of text section */
- } :text = 0x9090
-
- NOTES :text :note
-
- . = ALIGN(16); /* Exception table */
- __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
- } :text = 0x9090
-
- RODATA
-
- /* writeable */
- . = ALIGN(PAGE_SIZE);
- .data : AT(ADDR(.data) - LOAD_OFFSET) { /* Data */
- DATA_DATA
- CONSTRUCTORS
- } :data
-
- . = ALIGN(PAGE_SIZE);
- .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
- __nosave_begin = .;
- *(.data.nosave)
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
- }
-
- . = ALIGN(PAGE_SIZE);
- .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
- *(.data.page_aligned)
- *(.data.idt)
- }
-
- . = ALIGN(32);
- .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
- *(.data.cacheline_aligned)
- }
-
- /* rarely changed data like cpu maps */
- . = ALIGN(32);
- .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
- *(.data.read_mostly)
- _edata = .; /* End of data section */
- }
-
- . = ALIGN(THREAD_SIZE); /* init_task */
- .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
- *(.data.init_task)
- }
-
- /* might get freed after init */
- . = ALIGN(PAGE_SIZE);
- .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
- __smp_locks = .;
- *(.smp_locks)
- __smp_locks_end = .;
- }
- /* will be freed after init
- * Following ALIGN() is required to make sure no other data falls on the
- * same page where __smp_alt_end is pointing as that page might be freed
- * after boot. Always make sure that ALIGN() directive is present after
- * the section which contains __smp_alt_end.
- */
- . = ALIGN(PAGE_SIZE);
-
- /* will be freed after init */
- . = ALIGN(PAGE_SIZE); /* Init code and data */
- .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
- __init_begin = .;
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
- .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
- INIT_DATA
- }
- . = ALIGN(16);
- .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
- }
- .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
- }
- .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
- }
- .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
- __x86_cpu_dev_start = .;
- *(.x86_cpu_dev.init)
- __x86_cpu_dev_end = .;
- }
- SECURITY_INIT
- . = ALIGN(4);
- .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
- __alt_instructions = .;
- *(.altinstructions)
- __alt_instructions_end = .;
- }
- .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
- *(.altinstr_replacement)
- }
- . = ALIGN(4);
- .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
- __parainstructions = .;
- *(.parainstructions)
- __parainstructions_end = .;
- }
- /* .exit.text is discard at runtime, not link time, to deal with references
- from .altinstructions and .eh_frame */
- .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
- EXIT_TEXT
- }
- .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
- EXIT_DATA
- }
-#if defined(CONFIG_BLK_DEV_INITRD)
- . = ALIGN(PAGE_SIZE);
- .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
- }
-#endif
- PERCPU(PAGE_SIZE)
- . = ALIGN(PAGE_SIZE);
- /* freed after init ends here */
-
- .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
- __init_end = .;
- __bss_start = .; /* BSS */
- *(.bss.page_aligned)
- *(.bss)
- . = ALIGN(4);
- __bss_stop = .;
- }
-
- .brk : AT(ADDR(.brk) - LOAD_OFFSET) {
- . = ALIGN(PAGE_SIZE);
- __brk_base = . ;
- . += 64 * 1024 ; /* 64k alignment slop space */
- *(.brk_reservation) /* areas brk users have reserved */
- __brk_limit = . ;
- }
-
- .end : AT(ADDR(.end) - LOAD_OFFSET) {
- _end = . ;
- }
-
- /* Sections to be discarded */
- /DISCARD/ : {
- *(.exitcall.exit)
- *(.discard)
- }
-
- STABS_DEBUG
-
- DWARF_DEBUG
-}
-
-/*
- * Build-time check on the image size:
- */
-ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
- "kernel image bigger than KERNEL_IMAGE_SIZE")
-
-#ifdef CONFIG_KEXEC
-/* Link time checks */
-#include <asm/kexec.h>
-
-ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
- "kexec control code size is too big")
-#endif
+++ /dev/null
-/* ld script to make x86-64 Linux kernel
- * Written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>;
- */
-
-#define LOAD_OFFSET __START_KERNEL_map
-
-#include <asm-generic/vmlinux.lds.h>
-#include <asm/asm-offsets.h>
-#include <asm/page_types.h>
-
-#undef i386 /* in case the preprocessor is a 32bit one */
-
-OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64")
-OUTPUT_ARCH(i386:x86-64)
-ENTRY(phys_startup_64)
-jiffies_64 = jiffies;
-PHDRS {
- text PT_LOAD FLAGS(5); /* R_E */
- data PT_LOAD FLAGS(7); /* RWE */
- user PT_LOAD FLAGS(7); /* RWE */
- data.init PT_LOAD FLAGS(7); /* RWE */
-#ifdef CONFIG_SMP
- percpu PT_LOAD FLAGS(7); /* RWE */
-#endif
- data.init2 PT_LOAD FLAGS(7); /* RWE */
- note PT_NOTE FLAGS(0); /* ___ */
-}
-SECTIONS
-{
- . = __START_KERNEL;
- phys_startup_64 = startup_64 - LOAD_OFFSET;
- .text : AT(ADDR(.text) - LOAD_OFFSET) {
- _text = .; /* Text and read-only data */
- /* First the code that has to be first for bootstrapping */
- *(.text.head)
- _stext = .;
- /* Then the rest */
- TEXT_TEXT
- SCHED_TEXT
- LOCK_TEXT
- KPROBES_TEXT
- IRQENTRY_TEXT
- *(.fixup)
- *(.gnu.warning)
- _etext = .; /* End of text section */
- } :text = 0x9090
-
- NOTES :text :note
-
- . = ALIGN(16); /* Exception table */
- __ex_table : AT(ADDR(__ex_table) - LOAD_OFFSET) {
- __start___ex_table = .;
- *(__ex_table)
- __stop___ex_table = .;
- } :text = 0x9090
-
- RODATA
-
- . = ALIGN(PAGE_SIZE); /* Align data segment to page size boundary */
- /* Data */
- .data : AT(ADDR(.data) - LOAD_OFFSET) {
- DATA_DATA
- CONSTRUCTORS
- _edata = .; /* End of data section */
- } :data
-
-
- .data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
- . = ALIGN(PAGE_SIZE);
- . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
- *(.data.cacheline_aligned)
- }
- . = ALIGN(CONFIG_X86_INTERNODE_CACHE_BYTES);
- .data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
- *(.data.read_mostly)
- }
-
-#define VSYSCALL_ADDR (-10*1024*1024)
-#define VSYSCALL_PHYS_ADDR ((LOADADDR(.data.read_mostly) + SIZEOF(.data.read_mostly) + 4095) & ~(4095))
-#define VSYSCALL_VIRT_ADDR ((ADDR(.data.read_mostly) + SIZEOF(.data.read_mostly) + 4095) & ~(4095))
-
-#define VLOAD_OFFSET (VSYSCALL_ADDR - VSYSCALL_PHYS_ADDR)
-#define VLOAD(x) (ADDR(x) - VLOAD_OFFSET)
-
-#define VVIRT_OFFSET (VSYSCALL_ADDR - VSYSCALL_VIRT_ADDR)
-#define VVIRT(x) (ADDR(x) - VVIRT_OFFSET)
-
- . = VSYSCALL_ADDR;
- .vsyscall_0 : AT(VSYSCALL_PHYS_ADDR) { *(.vsyscall_0) } :user
- __vsyscall_0 = VSYSCALL_VIRT_ADDR;
-
- . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
- .vsyscall_fn : AT(VLOAD(.vsyscall_fn)) { *(.vsyscall_fn) }
- . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
- .vsyscall_gtod_data : AT(VLOAD(.vsyscall_gtod_data))
- { *(.vsyscall_gtod_data) }
- vsyscall_gtod_data = VVIRT(.vsyscall_gtod_data);
- .vsyscall_clock : AT(VLOAD(.vsyscall_clock))
- { *(.vsyscall_clock) }
- vsyscall_clock = VVIRT(.vsyscall_clock);
-
-
- .vsyscall_1 ADDR(.vsyscall_0) + 1024: AT(VLOAD(.vsyscall_1))
- { *(.vsyscall_1) }
- .vsyscall_2 ADDR(.vsyscall_0) + 2048: AT(VLOAD(.vsyscall_2))
- { *(.vsyscall_2) }
-
- .vgetcpu_mode : AT(VLOAD(.vgetcpu_mode)) { *(.vgetcpu_mode) }
- vgetcpu_mode = VVIRT(.vgetcpu_mode);
-
- . = ALIGN(CONFIG_X86_L1_CACHE_BYTES);
- .jiffies : AT(VLOAD(.jiffies)) { *(.jiffies) }
- jiffies = VVIRT(.jiffies);
-
- .vsyscall_3 ADDR(.vsyscall_0) + 3072: AT(VLOAD(.vsyscall_3))
- { *(.vsyscall_3) }
-
- . = VSYSCALL_VIRT_ADDR + PAGE_SIZE;
-
-#undef VSYSCALL_ADDR
-#undef VSYSCALL_PHYS_ADDR
-#undef VSYSCALL_VIRT_ADDR
-#undef VLOAD_OFFSET
-#undef VLOAD
-#undef VVIRT_OFFSET
-#undef VVIRT
-
- .data.init_task : AT(ADDR(.data.init_task) - LOAD_OFFSET) {
- . = ALIGN(THREAD_SIZE); /* init_task */
- *(.data.init_task)
- }:data.init
-
- .data.page_aligned : AT(ADDR(.data.page_aligned) - LOAD_OFFSET) {
- . = ALIGN(PAGE_SIZE);
- *(.data.page_aligned)
- }
-
- .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
- /* might get freed after init */
- . = ALIGN(PAGE_SIZE);
- __smp_alt_begin = .;
- __smp_locks = .;
- *(.smp_locks)
- __smp_locks_end = .;
- . = ALIGN(PAGE_SIZE);
- __smp_alt_end = .;
- }
-
- . = ALIGN(PAGE_SIZE); /* Init code and data */
- __init_begin = .; /* paired with __init_end */
- .init.text : AT(ADDR(.init.text) - LOAD_OFFSET) {
- _sinittext = .;
- INIT_TEXT
- _einittext = .;
- }
- .init.data : AT(ADDR(.init.data) - LOAD_OFFSET) {
- __initdata_begin = .;
- INIT_DATA
- __initdata_end = .;
- }
-
- .init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {
- . = ALIGN(16);
- __setup_start = .;
- *(.init.setup)
- __setup_end = .;
- }
- .initcall.init : AT(ADDR(.initcall.init) - LOAD_OFFSET) {
- __initcall_start = .;
- INITCALLS
- __initcall_end = .;
- }
- .con_initcall.init : AT(ADDR(.con_initcall.init) - LOAD_OFFSET) {
- __con_initcall_start = .;
- *(.con_initcall.init)
- __con_initcall_end = .;
- }
- .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
- __x86_cpu_dev_start = .;
- *(.x86_cpu_dev.init)
- __x86_cpu_dev_end = .;
- }
- SECURITY_INIT
-
- . = ALIGN(8);
- .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
- __parainstructions = .;
- *(.parainstructions)
- __parainstructions_end = .;
- }
-
- .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
- . = ALIGN(8);
- __alt_instructions = .;
- *(.altinstructions)
- __alt_instructions_end = .;
- }
- .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
- *(.altinstr_replacement)
- }
- /* .exit.text is discard at runtime, not link time, to deal with references
- from .altinstructions and .eh_frame */
- .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
- EXIT_TEXT
- }
- .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
- EXIT_DATA
- }
-
-#ifdef CONFIG_BLK_DEV_INITRD
- . = ALIGN(PAGE_SIZE);
- .init.ramfs : AT(ADDR(.init.ramfs) - LOAD_OFFSET) {
- __initramfs_start = .;
- *(.init.ramfs)
- __initramfs_end = .;
- }
-#endif
-
-#ifdef CONFIG_SMP
- /*
- * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the
- * output PHDR, so the next output section - __data_nosave - should
- * start another section data.init2. Also, pda should be at the head of
- * percpu area. Preallocate it and define the percpu offset symbol
- * so that it can be accessed as a percpu variable.
- */
- . = ALIGN(PAGE_SIZE);
- PERCPU_VADDR(0, :percpu)
-#else
- PERCPU(PAGE_SIZE)
-#endif
-
- . = ALIGN(PAGE_SIZE);
- __init_end = .;
-
- .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
- . = ALIGN(PAGE_SIZE);
- __nosave_begin = .;
- *(.data.nosave)
- . = ALIGN(PAGE_SIZE);
- __nosave_end = .;
- } :data.init2 /* use another section data.init2, see PERCPU_VADDR() above */
-
- .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
- . = ALIGN(PAGE_SIZE);
- __bss_start = .; /* BSS */
- *(.bss.page_aligned)
- *(.bss)
- __bss_stop = .;
- }
-
- .brk : AT(ADDR(.brk) - LOAD_OFFSET) {
- . = ALIGN(PAGE_SIZE);
- __brk_base = . ;
- . += 64 * 1024 ; /* 64k alignment slop space */
- *(.brk_reservation) /* areas brk users have reserved */
- __brk_limit = . ;
- }
-
- _end = . ;
-
- /* Sections to be discarded */
- /DISCARD/ : {
- *(.exitcall.exit)
- *(.eh_frame)
- *(.discard)
- }
-
- STABS_DEBUG
-
- DWARF_DEBUG
-}
-
- /*
- * Per-cpu symbols which need to be offset from __per_cpu_load
- * for the boot processor.
- */
-#define INIT_PER_CPU(x) init_per_cpu__##x = per_cpu__##x + __per_cpu_load
-INIT_PER_CPU(gdt_page);
-INIT_PER_CPU(irq_stack_union);
-
-/*
- * Build-time check on the image size:
- */
-ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
- "kernel image bigger than KERNEL_IMAGE_SIZE")
-
-#ifdef CONFIG_SMP
-ASSERT((per_cpu__irq_stack_union == 0),
- "irq_stack_union is not at start of per-cpu area");
-#endif
-
-#ifdef CONFIG_KEXEC
-#include <asm/kexec.h>
-
-ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
- "kexec control code size is too big")
-#endif
obj-y := i386_head.o boot.o
+CFLAGS_boot.o := $(call cc-option, -fno-stack-protector)
#include <asm/mce.h>
#include <asm/io.h>
#include <asm/i387.h>
+#include <asm/stackprotector.h>
#include <asm/reboot.h> /* for struct machine_ops */
/*G:010 Welcome to the Guest!
void lguest_setup_irq(unsigned int irq)
{
- irq_to_desc_alloc_cpu(irq, 0);
+ irq_to_desc_alloc_node(irq, 0);
set_irq_chip_and_handler_name(irq, &lguest_irq_controller,
handle_level_irq, "level");
}
* lguest_init() where the rest of the fairly chaotic boot setup
* occurs. */
+ /* The stack protector is a weird thing where gcc places a canary
+ * value on the stack and then checks it on return. This file is
+ * compiled with -fno-stack-protector it, so we got this far without
+ * problems. The value of the canary is kept at offset 20 from the
+ * %gs register, so we need to set that up before calling C functions
+ * in other files. */
+ setup_stack_canary_segment(0);
+ /* We could just call load_stack_canary_segment(), but we might as
+ * call switch_to_new_gdt() which loads the whole table and sets up
+ * the per-cpu segment descriptor register %fs as well. */
+ switch_to_new_gdt(0);
+
/* As described in head_32.S, we map the first 128M of memory. */
max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT;
- /* Load the %fs segment register (the per-cpu segment register) with
- * the normal data segment to get through booting. */
- asm volatile ("mov %0, %%fs" : : "r" (__KERNEL_DS) : "memory");
-
/* The Host<->Guest Switcher lives at the top of our address space, and
* the Host told us how big it is when we made LGUEST_INIT hypercall:
* it put the answer in lguest_data.reserve_mem */
st->current_address >= st->marker[1].start_address) {
const char *unit = units;
unsigned long delta;
+ int width = sizeof(unsigned long) * 2;
/*
* Now print the actual finished series
*/
- seq_printf(m, "0x%p-0x%p ",
- (void *)st->start_address,
- (void *)st->current_address);
+ seq_printf(m, "0x%0*lx-0x%0*lx ",
+ width, st->start_address,
+ width, st->current_address);
delta = (st->current_address - st->start_address) >> 10;
while (!(delta & 1023) && unit[1]) {
* Copyright (C) 2001, 2002 Andi Kleen, SuSE Labs.
* Copyright (C) 2008-2009, Red Hat Inc., Ingo Molnar
*/
-#include <linux/interrupt.h>
-#include <linux/mmiotrace.h>
-#include <linux/bootmem.h>
-#include <linux/compiler.h>
-#include <linux/highmem.h>
-#include <linux/kprobes.h>
-#include <linux/uaccess.h>
-#include <linux/vmalloc.h>
-#include <linux/vt_kern.h>
-#include <linux/signal.h>
-#include <linux/kernel.h>
-#include <linux/ptrace.h>
-#include <linux/string.h>
-#include <linux/module.h>
-#include <linux/kdebug.h>
-#include <linux/errno.h>
-#include <linux/magic.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/mman.h>
-#include <linux/tty.h>
-#include <linux/smp.h>
-#include <linux/mm.h>
-
-#include <asm-generic/sections.h>
-
-#include <asm/tlbflush.h>
-#include <asm/pgalloc.h>
-#include <asm/segment.h>
-#include <asm/system.h>
-#include <asm/proto.h>
-#include <asm/traps.h>
-#include <asm/desc.h>
+#include <linux/magic.h> /* STACK_END_MAGIC */
+#include <linux/sched.h> /* test_thread_flag(), ... */
+#include <linux/kdebug.h> /* oops_begin/end, ... */
+#include <linux/module.h> /* search_exception_table */
+#include <linux/bootmem.h> /* max_low_pfn */
+#include <linux/kprobes.h> /* __kprobes, ... */
+#include <linux/mmiotrace.h> /* kmmio_handler, ... */
+
+#include <asm/traps.h> /* dotraplinkage, ... */
+#include <asm/pgalloc.h> /* pgd_*(), ... */
/*
* Page fault error code bits:
static int is_errata93(struct pt_regs *regs, unsigned long address)
{
#ifdef CONFIG_X86_64
- static int once;
-
if (address != regs->ip)
return 0;
address |= 0xffffffffUL << 32;
if ((address >= (u64)_stext && address <= (u64)_etext) ||
(address >= MODULES_VADDR && address <= MODULES_END)) {
- if (!once) {
- printk(errata93_warning);
- once = 1;
- }
+ printk_once(errata93_warning);
regs->ip = address;
return 1;
}
unsigned long sbase = saddr & PUD_MASK;
unsigned long s_end = sbase + PUD_SIZE;
+ /* Allow segments to share if only one is marked locked */
+ unsigned long vm_flags = vma->vm_flags & ~VM_LOCKED;
+ unsigned long svm_flags = svma->vm_flags & ~VM_LOCKED;
+
/*
* match the virtual addresses, permission and the alignment of the
* page table page.
*/
if (pmd_index(addr) != pmd_index(saddr) ||
- vma->vm_flags != svma->vm_flags ||
+ vm_flags != svm_flags ||
sbase < svma->vm_start || svma->vm_end < s_end)
return 0;
+#include <linux/initrd.h>
#include <linux/ioport.h>
#include <linux/swap.h>
#include <asm/setup.h>
#include <asm/system.h>
#include <asm/tlbflush.h>
+#include <asm/tlb.h>
+
+DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
unsigned long __initdata e820_table_start;
unsigned long __meminitdata e820_table_end;
#endif
;
+int nx_enabled;
+
+#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE)
+static int disable_nx __cpuinitdata;
+
+/*
+ * noexec = on|off
+ *
+ * Control non-executable mappings for processes.
+ *
+ * on Enable
+ * off Disable
+ */
+static int __init noexec_setup(char *str)
+{
+ if (!str)
+ return -EINVAL;
+ if (!strncmp(str, "on", 2)) {
+ __supported_pte_mask |= _PAGE_NX;
+ disable_nx = 0;
+ } else if (!strncmp(str, "off", 3)) {
+ disable_nx = 1;
+ __supported_pte_mask &= ~_PAGE_NX;
+ }
+ return 0;
+}
+early_param("noexec", noexec_setup);
+#endif
+
+#ifdef CONFIG_X86_PAE
+static void __init set_nx(void)
+{
+ unsigned int v[4], l, h;
+
+ if (cpu_has_pae && (cpuid_eax(0x80000000) > 0x80000001)) {
+ cpuid(0x80000001, &v[0], &v[1], &v[2], &v[3]);
+
+ if ((v[3] & (1 << 20)) && !disable_nx) {
+ rdmsr(MSR_EFER, l, h);
+ l |= EFER_NX;
+ wrmsr(MSR_EFER, l, h);
+ nx_enabled = 1;
+ __supported_pte_mask |= _PAGE_NX;
+ }
+ }
+}
+#else
+static inline void set_nx(void)
+{
+}
+#endif
+
+#ifdef CONFIG_X86_64
+void __cpuinit check_efer(void)
+{
+ unsigned long efer;
+
+ rdmsrl(MSR_EFER, efer);
+ if (!(efer & EFER_NX) || disable_nx)
+ __supported_pte_mask &= ~_PAGE_NX;
+}
+#endif
+
static void __init find_early_table_space(unsigned long end, int use_pse,
int use_gbpages)
{
*/
#ifdef CONFIG_X86_32
start = 0x7000;
- e820_table_start = find_e820_area(start, max_pfn_mapped<<PAGE_SHIFT,
- tables, PAGE_SIZE);
-#else /* CONFIG_X86_64 */
+#else
start = 0x8000;
- e820_table_start = find_e820_area(start, end, tables, PAGE_SIZE);
#endif
+ e820_table_start = find_e820_area(start, max_pfn_mapped<<PAGE_SHIFT,
+ tables, PAGE_SIZE);
if (e820_table_start == -1UL)
panic("Cannot find space for the kernel page tables");
use_gbpages = direct_gbpages;
#endif
-#ifdef CONFIG_X86_32
-#ifdef CONFIG_X86_PAE
set_nx();
if (nx_enabled)
printk(KERN_INFO "NX (Execute Disable) protection: active\n");
-#endif
/* Enable PSE if available */
if (cpu_has_pse)
set_in_cr4(X86_CR4_PGE);
__supported_pte_mask |= _PAGE_GLOBAL;
}
-#endif
if (use_gbpages)
page_size_mask |= 1 << PG_LEVEL_1G;
#include <asm/paravirt.h>
#include <asm/setup.h>
#include <asm/cacheflush.h>
+#include <asm/page_types.h>
#include <asm/init.h>
-unsigned long max_low_pfn_mapped;
-unsigned long max_pfn_mapped;
-
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
unsigned long highstart_pfn, highend_pfn;
static noinline int do_test_wp_bit(void);
flush_tlb_all();
}
-int nx_enabled;
-
pteval_t __supported_pte_mask __read_mostly = ~(_PAGE_NX | _PAGE_GLOBAL | _PAGE_IOMAP);
EXPORT_SYMBOL_GPL(__supported_pte_mask);
-#ifdef CONFIG_X86_PAE
-
-static int disable_nx __initdata;
-
-/*
- * noexec = on|off
- *
- * Control non executable mappings.
- *
- * on Enable
- * off Disable
- */
-static int __init noexec_setup(char *str)
-{
- if (!str || !strcmp(str, "on")) {
- if (cpu_has_nx) {
- __supported_pte_mask |= _PAGE_NX;
- disable_nx = 0;
- }
- } else {
- if (!strcmp(str, "off")) {
- disable_nx = 1;
- __supported_pte_mask &= ~_PAGE_NX;
- } else {
- return -EINVAL;
- }
- }
-
- return 0;
-}
-early_param("noexec", noexec_setup);
-
-void __init set_nx(void)
-{
- unsigned int v[4], l, h;
-
- if (cpu_has_pae && (cpuid_eax(0x80000000) > 0x80000001)) {
- cpuid(0x80000001, &v[0], &v[1], &v[2], &v[3]);
-
- if ((v[3] & (1 << 20)) && !disable_nx) {
- rdmsr(MSR_EFER, l, h);
- l |= EFER_NX;
- wrmsr(MSR_EFER, l, h);
- nx_enabled = 1;
- __supported_pte_mask |= _PAGE_NX;
- }
- }
-}
-#endif
-
/* user-defined highmem size */
static unsigned int highmem_pages = -1;
highstart_pfn = highend_pfn = max_pfn;
if (max_pfn > max_low_pfn)
highstart_pfn = max_low_pfn;
- memory_present(0, 0, highend_pfn);
e820_register_active_regions(0, 0, highend_pfn);
+ sparse_memory_present_with_active_regions(0);
printk(KERN_NOTICE "%ldMB HIGHMEM available.\n",
pages_to_mb(highend_pfn - highstart_pfn));
num_physpages = highend_pfn;
high_memory = (void *) __va(highstart_pfn * PAGE_SIZE - 1) + 1;
#else
- memory_present(0, 0, max_low_pfn);
e820_register_active_regions(0, 0, max_low_pfn);
+ sparse_memory_present_with_active_regions(0);
num_physpages = max_low_pfn;
high_memory = (void *) __va(max_low_pfn * PAGE_SIZE - 1) + 1;
#endif
#include <asm/cacheflush.h>
#include <asm/init.h>
-/*
- * end_pfn only includes RAM, while max_pfn_mapped includes all e820 entries.
- * The direct mapping extends to max_pfn_mapped, so that we can directly access
- * apertures, ACPI and other tables without having to play with fixmaps.
- */
-unsigned long max_low_pfn_mapped;
-unsigned long max_pfn_mapped;
-
static unsigned long dma_reserve __initdata;
-DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
-
static int __init parse_direct_gbpages_off(char *arg)
{
direct_gbpages = 0;
pteval_t __supported_pte_mask __read_mostly = ~_PAGE_IOMAP;
EXPORT_SYMBOL_GPL(__supported_pte_mask);
-static int disable_nx __cpuinitdata;
-
-/*
- * noexec=on|off
- * Control non-executable mappings for 64-bit processes.
- *
- * on Enable (default)
- * off Disable
- */
-static int __init nonx_setup(char *str)
-{
- if (!str)
- return -EINVAL;
- if (!strncmp(str, "on", 2)) {
- __supported_pte_mask |= _PAGE_NX;
- disable_nx = 0;
- } else if (!strncmp(str, "off", 3)) {
- disable_nx = 1;
- __supported_pte_mask &= ~_PAGE_NX;
- }
- return 0;
-}
-early_param("noexec", nonx_setup);
-
-void __cpuinit check_efer(void)
-{
- unsigned long efer;
-
- rdmsrl(MSR_EFER, efer);
- if (!(efer & EFER_NX) || disable_nx)
- __supported_pte_mask &= ~_PAGE_NX;
-}
-
int force_personality32;
/*
early_res_to_bootmem(0, end_pfn<<PAGE_SHIFT);
reserve_bootmem(bootmap, bootmap_size, BOOTMEM_DEFAULT);
}
+#endif
void __init paging_init(void)
{
max_zone_pfns[ZONE_DMA32] = MAX_DMA32_PFN;
max_zone_pfns[ZONE_NORMAL] = max_pfn;
- memory_present(0, 0, max_pfn);
+ sparse_memory_present_with_active_regions(MAX_NUMNODES);
sparse_init();
free_area_init_nodes(max_zone_pfns);
}
-#endif
/*
* Memory hotplug specific functions
static void __init memtest(u64 pattern, u64 start_phys, u64 size)
{
- u64 i, count;
- u64 *start;
+ u64 *p;
+ void *start, *end;
u64 start_bad, last_bad;
u64 start_phys_aligned;
size_t incr;
incr = sizeof(pattern);
start_phys_aligned = ALIGN(start_phys, incr);
- count = (size - (start_phys_aligned - start_phys))/incr;
start = __va(start_phys_aligned);
+ end = start + size - (start_phys_aligned - start_phys);
start_bad = 0;
last_bad = 0;
- for (i = 0; i < count; i++)
- start[i] = pattern;
- for (i = 0; i < count; i++, start++, start_phys_aligned += incr) {
- if (*start == pattern)
+ for (p = start; p < end; p++)
+ *p = pattern;
+ for (p = start; p < end; p++, start_phys_aligned += incr) {
+ if (*p == pattern)
continue;
if (start_phys_aligned == last_bad + incr) {
last_bad += incr;
}
/* Initialize bootmem allocator for a node */
-void __init setup_node_bootmem(int nodeid, unsigned long start,
- unsigned long end)
+void __init
+setup_node_bootmem(int nodeid, unsigned long start, unsigned long end)
{
unsigned long start_pfn, last_pfn, bootmap_pages, bootmap_size;
+ const int pgdat_size = roundup(sizeof(pg_data_t), PAGE_SIZE);
unsigned long bootmap_start, nodedata_phys;
void *bootmap;
- const int pgdat_size = roundup(sizeof(pg_data_t), PAGE_SIZE);
int nid;
if (!end)
return;
+ /*
+ * Don't confuse VM with a node that doesn't have the
+ * minimum amount of memory:
+ */
+ if (end && (end - start) < NODE_MIN_SIZE)
+ return;
+
start = roundup(start, ZONE_ALIGN);
printk(KERN_INFO "Bootmem setup node %d %016lx-%016lx\n", nodeid,
reserve_bootmem_node(NODE_DATA(nodeid), bootmap_start,
bootmap_pages<<PAGE_SHIFT, BOOTMEM_DEFAULT);
-#ifdef CONFIG_ACPI_NUMA
- srat_reserve_add_area(nodeid);
-#endif
node_set_online(nodeid);
}
return pages;
}
-void __init paging_init(void)
-{
- unsigned long max_zone_pfns[MAX_NR_ZONES];
-
- memset(max_zone_pfns, 0, sizeof(max_zone_pfns));
- max_zone_pfns[ZONE_DMA] = MAX_DMA_PFN;
- max_zone_pfns[ZONE_DMA32] = MAX_DMA32_PFN;
- max_zone_pfns[ZONE_NORMAL] = max_pfn;
-
- sparse_memory_present_with_active_regions(MAX_NUMNODES);
- sparse_init();
-
- free_area_init_nodes(max_zone_pfns);
-}
-
static __init int numa_setup(char *opt)
{
if (!opt)
#ifdef CONFIG_ACPI_NUMA
if (!strncmp(opt, "noacpi", 6))
acpi_numa = -1;
- if (!strncmp(opt, "hotadd=", 7))
- hotadd_percent = simple_strtoul(opt+7, NULL, 10);
#endif
return 0;
}
static nodemask_t cpu_nodes_parsed __initdata;
static struct bootnode nodes[MAX_NUMNODES] __initdata;
static struct bootnode nodes_add[MAX_NUMNODES];
-static int found_add_area __initdata;
-int hotadd_percent __initdata = 0;
static int num_node_memblks __initdata;
static struct bootnode node_memblk_range[NR_NODE_MEMBLKS] __initdata;
static int memblk_nodeid[NR_NODE_MEMBLKS] __initdata;
-/* Too small nodes confuse the VM badly. Usually they result
- from BIOS bugs. */
-#define NODE_MIN_SIZE (4*1024*1024)
-
static __init int setup_node(int pxm)
{
return acpi_map_pxm_to_node(pxm);
{
struct bootnode *nd = &nodes[i];
- if (found_add_area)
- return;
-
if (nd->start < start) {
nd->start = start;
if (nd->end < nd->start)
int i;
printk(KERN_ERR "SRAT: SRAT not used.\n");
acpi_numa = -1;
- found_add_area = 0;
for (i = 0; i < MAX_LOCAL_APIC; i++)
apicid_to_node[i] = NUMA_NO_NODE;
for (i = 0; i < MAX_NUMNODES; i++)
pxm, apic_id, node);
}
-static int update_end_of_memory(unsigned long end) {return -1;}
-static int hotadd_enough_memory(struct bootnode *nd) {return 1;}
#ifdef CONFIG_MEMORY_HOTPLUG_SPARSE
static inline int save_add_info(void) {return 1;}
#else
static inline int save_add_info(void) {return 0;}
#endif
/*
- * Update nodes_add and decide if to include add are in the zone.
- * Both SPARSE and RESERVE need nodes_add information.
- * This code supports one contiguous hot add area per node.
+ * Update nodes_add[]
+ * This code supports one contiguous hot add area per node
*/
-static int __init
-reserve_hotadd(int node, unsigned long start, unsigned long end)
+static void __init
+update_nodes_add(int node, unsigned long start, unsigned long end)
{
unsigned long s_pfn = start >> PAGE_SHIFT;
unsigned long e_pfn = end >> PAGE_SHIFT;
- int ret = 0, changed = 0;
+ int changed = 0;
struct bootnode *nd = &nodes_add[node];
/* I had some trouble with strange memory hotadd regions breaking
mistakes */
if ((signed long)(end - start) < NODE_MIN_SIZE) {
printk(KERN_ERR "SRAT: Hotplug area too small\n");
- return -1;
+ return;
}
/* This check might be a bit too strict, but I'm keeping it for now. */
printk(KERN_ERR
"SRAT: Hotplug area %lu -> %lu has existing memory\n",
s_pfn, e_pfn);
- return -1;
- }
-
- if (!hotadd_enough_memory(&nodes_add[node])) {
- printk(KERN_ERR "SRAT: Hotplug area too large\n");
- return -1;
+ return;
}
/* Looks good */
printk(KERN_ERR "SRAT: Hotplug zone not continuous. Partly ignored\n");
}
- ret = update_end_of_memory(nd->end);
-
if (changed)
- printk(KERN_INFO "SRAT: hot plug zone found %Lx - %Lx\n", nd->start, nd->end);
- return ret;
+ printk(KERN_INFO "SRAT: hot plug zone found %Lx - %Lx\n",
+ nd->start, nd->end);
}
/* Callback for parsing of the Proximity Domain <-> Memory Area mappings */
start, end);
e820_register_active_regions(node, start >> PAGE_SHIFT,
end >> PAGE_SHIFT);
- push_node_boundaries(node, nd->start >> PAGE_SHIFT,
- nd->end >> PAGE_SHIFT);
- if ((ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) &&
- (reserve_hotadd(node, start, end) < 0)) {
- /* Ignore hotadd region. Undo damage */
- printk(KERN_NOTICE "SRAT: Hotplug region ignored\n");
+ if (ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) {
+ update_nodes_add(node, start, end);
+ /* restore nodes[node] */
*nd = oldnode;
if ((nd->start | nd->end) == 0)
node_clear(node, nodes_parsed);
pxmram = 0;
}
- e820ram = max_pfn - absent_pages_in_range(0, max_pfn);
- /* We seem to lose 3 pages somewhere. Allow a bit of slack. */
- if ((long)(e820ram - pxmram) >= 1*1024*1024) {
+ e820ram = max_pfn - (e820_hole_size(0, max_pfn<<PAGE_SHIFT)>>PAGE_SHIFT);
+ /* We seem to lose 3 pages somewhere. Allow 1M of slack. */
+ if ((long)(e820ram - pxmram) >= (1<<(20 - PAGE_SHIFT))) {
printk(KERN_ERR
"SRAT: PXMs only cover %luMB of your %luMB e820 RAM. Not used.\n",
(pxmram << PAGE_SHIFT) >> 20,
return 1;
}
-static void __init unparse_node(int node)
-{
- int i;
- node_clear(node, nodes_parsed);
- node_clear(node, cpu_nodes_parsed);
- for (i = 0; i < MAX_LOCAL_APIC; i++) {
- if (apicid_to_node[i] == node)
- apicid_to_node[i] = NUMA_NO_NODE;
- }
-}
-
void __init acpi_numa_arch_fixup(void) {}
/* Use the information discovered above to actually set up the nodes. */
return -1;
/* First clean up the node list */
- for (i = 0; i < MAX_NUMNODES; i++) {
+ for (i = 0; i < MAX_NUMNODES; i++)
cutoff_node(i, start, end);
- /*
- * don't confuse VM with a node that doesn't have the
- * minimum memory.
- */
- if (nodes[i].end &&
- (nodes[i].end - nodes[i].start) < NODE_MIN_SIZE) {
- unparse_node(i);
- node_set_offline(i);
- }
- }
if (!nodes_cover_memory(nodes)) {
bad_srat();
if (node == NUMA_NO_NODE)
continue;
- if (!node_isset(node, node_possible_map))
+ if (!node_online(node))
numa_clear_node(i);
}
numa_init_array();
}
#endif /* CONFIG_NUMA_EMU */
-void __init srat_reserve_add_area(int nodeid)
-{
- if (found_add_area && nodes_add[nodeid].end) {
- u64 total_mb;
-
- printk(KERN_INFO "SRAT: Reserving hot-add memory space "
- "for node %d at %Lx-%Lx\n",
- nodeid, nodes_add[nodeid].start, nodes_add[nodeid].end);
- total_mb = (nodes_add[nodeid].end - nodes_add[nodeid].start)
- >> PAGE_SHIFT;
- total_mb *= sizeof(struct page);
- total_mb >>= 20;
- printk(KERN_INFO "SRAT: This will cost you %Lu MB of "
- "pre-allocated memory.\n", (unsigned long long)total_mb);
- reserve_bootmem_node(NODE_DATA(nodeid), nodes_add[nodeid].start,
- nodes_add[nodeid].end - nodes_add[nodeid].start,
- BOOTMEM_DEFAULT);
- }
-}
-
int __node_distance(int a, int b)
{
int index;
return 0;
}
+ if (io_apic_assign_pci_irqs)
+ return 0;
+
/* Find IRQ routing entry */
if (!pirq_table)
pirq_penalty[dev->irq]++;
}
+ if (io_apic_assign_pci_irqs)
+ return;
+
dev = NULL;
while ((dev = pci_get_device(PCI_ANY_ID, PCI_ANY_ID, dev)) != NULL) {
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
if (!pin)
continue;
-#ifdef CONFIG_X86_IO_APIC
- /*
- * Recalculate IRQ numbers if we use the I/O APIC.
- */
- if (io_apic_assign_pci_irqs) {
- int irq;
-
- /*
- * interrupt pins are numbered starting from 1
- */
- irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
- PCI_SLOT(dev->devfn), pin - 1);
- /*
- * Busses behind bridges are typically not listed in the
- * MP-table. In this case we have to look up the IRQ
- * based on the parent bus, parent slot, and pin number.
- * The SMP code detects such bridged busses itself so we
- * should get into this branch reliably.
- */
- if (irq < 0 && dev->bus->parent) {
- /* go back to the bridge */
- struct pci_dev *bridge = dev->bus->self;
- int bus;
-
- pin = pci_swizzle_interrupt_pin(dev, pin);
- bus = bridge->bus->number;
- irq = IO_APIC_get_PCI_irq_vector(bus,
- PCI_SLOT(bridge->devfn), pin - 1);
- if (irq >= 0)
- dev_warn(&dev->dev,
- "using bridge %s INT %c to "
- "get IRQ %d\n",
- pci_name(bridge),
- 'A' + pin - 1, irq);
- }
- if (irq >= 0) {
- dev_info(&dev->dev,
- "PCI->APIC IRQ transform: INT %c "
- "-> IRQ %d\n",
- 'A' + pin - 1, irq);
- dev->irq = irq;
- }
- }
-#endif
/*
* Still no IRQ? Try to lookup one...
*/
pcibios_enable_irq = pirq_enable_irq;
pcibios_fixup_irqs();
+
+ if (io_apic_assign_pci_irqs && pci_routeirq) {
+ struct pci_dev *dev = NULL;
+ /*
+ * PCI IRQ routing is set up by pci_enable_device(), but we
+ * also do it here in case there are still broken drivers that
+ * don't use pci_enable_device().
+ */
+ printk(KERN_INFO "PCI: Routing PCI interrupts for all devices because \"pci=routeirq\" specified\n");
+ for_each_pci_dev(dev)
+ pirq_enable_irq(dev);
+ }
+
return 0;
}
static int pirq_enable_irq(struct pci_dev *dev)
{
u8 pin;
- struct pci_dev *temp_dev;
pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
- if (pin && !pcibios_lookup_irq(dev, 1) && !dev->irq) {
+ if (pin && !pcibios_lookup_irq(dev, 1)) {
char *msg = "";
+ if (!io_apic_assign_pci_irqs && dev->irq)
+ return 0;
+
if (io_apic_assign_pci_irqs) {
+#ifdef CONFIG_X86_IO_APIC
+ struct pci_dev *temp_dev;
int irq;
+ struct io_apic_irq_attr irq_attr;
- irq = IO_APIC_get_PCI_irq_vector(dev->bus->number, PCI_SLOT(dev->devfn), pin - 1);
+ irq = IO_APIC_get_PCI_irq_vector(dev->bus->number,
+ PCI_SLOT(dev->devfn),
+ pin - 1, &irq_attr);
/*
* Busses behind bridges are typically not listed in the MP-table.
* In this case we have to look up the IRQ based on the parent bus,
pin = pci_swizzle_interrupt_pin(dev, pin);
irq = IO_APIC_get_PCI_irq_vector(bridge->bus->number,
- PCI_SLOT(bridge->devfn), pin - 1);
+ PCI_SLOT(bridge->devfn),
+ pin - 1, &irq_attr);
if (irq >= 0)
dev_warn(&dev->dev, "using bridge %s "
"INT %c to get IRQ %d\n",
}
dev = temp_dev;
if (irq >= 0) {
+ io_apic_set_pci_routing(&dev->dev, irq,
+ &irq_attr);
+ dev->irq = irq;
dev_info(&dev->dev, "PCI->APIC IRQ transform: "
"INT %c -> IRQ %d\n", 'A' + pin - 1, irq);
- dev->irq = irq;
return 0;
} else
msg = "; probably buggy MP table";
+#endif
} else if (pci_probe & PCI_BIOS_IRQ_SCAN)
msg = "";
else
if (!fixmem32)
return AE_OK;
if ((mcfg_res->start >= fixmem32->address) &&
- (mcfg_res->end <= (fixmem32->address +
+ (mcfg_res->end < (fixmem32->address +
fixmem32->address_length))) {
mcfg_res->flags = 1;
return AE_CTRL_TERMINATE;
return AE_OK;
if ((mcfg_res->start >= address.minimum) &&
- (mcfg_res->end <= (address.minimum + address.address_length))) {
+ (mcfg_res->end < (address.minimum + address.address_length))) {
mcfg_res->flags = 1;
return AE_CTRL_TERMINATE;
}
struct resource mcfg_res;
mcfg_res.start = start;
- mcfg_res.end = end;
+ mcfg_res.end = end - 1;
mcfg_res.flags = 0;
acpi_get_devices("PNP0C01", find_mboard_resource, &mcfg_res, NULL);
#include <linux/sched.h>
#include <linux/init.h>
#include <linux/random.h>
+#include <linux/elf.h>
#include <asm/vsyscall.h>
#include <asm/vgtod.h>
#include <asm/proto.h>
blk_put_request(rq);
if (next_rq) {
blk_rq_unmap_user(next_rq->bio);
+ next_rq->bio = NULL;
blk_put_request(next_rq);
}
return ERR_PTR(ret);
hdr->dout_resid = rq->data_len;
hdr->din_resid = rq->next_rq->data_len;
blk_rq_unmap_user(bidi_bio);
+ rq->next_rq->bio = NULL;
blk_put_request(rq->next_rq);
} else if (rq_data_dir(rq) == READ)
hdr->din_resid = rq->data_len;
blk_rq_unmap_user(bio);
if (rq->cmd != rq->__cmd)
kfree(rq->cmd);
+ rq->bio = NULL;
blk_put_request(rq);
return ret;
if (err)
return err;
- walk->offset = 0;
-
- if (nbytes)
+ if (nbytes) {
+ walk->offset = 0;
+ walk->pg++;
return hash_walk_next(walk);
+ }
if (!walk->total)
return 0;
struct acpi_pci_data *pdata;
struct acpi_buffer buffer = { ACPI_ALLOCATE_BUFFER, NULL };
acpi_handle handle;
- struct pci_dev *dev;
- struct pci_bus *bus;
-
if (!device || !device->parent)
return -EINVAL;
* Locate matching device in PCI namespace. If it doesn't exist
* this typically means that the device isn't currently inserted
* (e.g. docking station, port replicator, etc.).
- * We cannot simply search the global pci device list, since
- * PCI devices are added to the global pci list when the root
- * bridge start ops are run, which may not have happened yet.
*/
- bus = pci_find_bus(data->id.segment, data->id.bus);
- if (bus) {
- list_for_each_entry(dev, &bus->devices, bus_list) {
- if (dev->devfn == PCI_DEVFN(data->id.device,
- data->id.function)) {
- data->dev = dev;
- break;
- }
- }
- }
+ data->dev = pci_get_slot(pdata->bus,
+ PCI_DEVFN(data->id.device, data->id.function));
if (!data->dev) {
ACPI_DEBUG_PRINT((ACPI_DB_INFO,
"Device %04x:%02x:%02x.%d not present in PCI namespace\n",
end:
kfree(buffer.pointer);
- if (result)
+ if (result) {
+ pci_dev_put(data->dev);
kfree(data);
-
+ }
return result;
}
if (data->dev->subordinate) {
acpi_pci_irq_del_prt(data->id.segment, data->bus->number);
}
+ pci_dev_put(data->dev);
kfree(data);
end:
/* Interrupt Line values above 0xF are forbidden */
if (dev->irq > 0 && (dev->irq <= 0xF)) {
printk(" - using IRQ %d\n", dev->irq);
- acpi_register_gsi(dev->irq, ACPI_LEVEL_SENSITIVE,
+ acpi_register_gsi(&dev->dev, dev->irq,
+ ACPI_LEVEL_SENSITIVE,
ACPI_ACTIVE_LOW);
return 0;
} else {
}
}
- rc = acpi_register_gsi(gsi, triggering, polarity);
+ rc = acpi_register_gsi(&dev->dev, gsi, triggering, polarity);
if (rc < 0) {
dev_warn(&dev->dev, "PCI INT %c: failed to register GSI\n",
pin_name(pin));
if (!pr)
return -ENOMEM;
- if (!alloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) {
+ if (!zalloc_cpumask_var(&pr->throttling.shared_cpu_map, GFP_KERNEL)) {
kfree(pr);
return -ENOMEM;
}
if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT))
return;
+ if (boot_cpu_has(X86_FEATURE_AMDC1E))
+ type = ACPI_STATE_C1;
+
/*
* Check, if one of the previous states already marked the lapic
* unstable
switch (cx->type) {
case ACPI_STATE_C1:
cx->valid = 1;
+ acpi_timer_check_state(i, pr, cx);
break;
case ACPI_STATE_C2:
/* Do not access any ACPI IO ports in suspend path */
if (acpi_idle_suspend) {
- acpi_safe_halt();
local_irq_enable();
+ cpu_relax();
return 0;
}
+ acpi_state_timer_broadcast(pr, cx, 1);
kt1 = ktime_get_real();
acpi_idle_do_entry(cx);
kt2 = ktime_get_real();
local_irq_enable();
cx->usage++;
+ acpi_state_timer_broadcast(pr, cx, 0);
return idle_time;
}
(u32) px->bus_master_latency,
(u32) px->control, (u32) px->status));
- if (!px->core_frequency) {
- printk(KERN_ERR PREFIX
- "Invalid _PSS data: freq is zero\n");
+ /*
+ * Check that ACPI's u64 MHz will be valid as u32 KHz in cpufreq
+ */
+ if (!px->core_frequency ||
+ ((u32)(px->core_frequency * 1000) !=
+ (px->core_frequency * 1000))) {
+ printk(KERN_ERR FW_BUG PREFIX
+ "Invalid BIOS _PSS frequency: 0x%llx MHz\n",
+ px->core_frequency);
result = -EFAULT;
kfree(pr->performance->states);
goto end;
state = acpi_get_throttling_state(pr, value);
if (state == -1) {
ACPI_WARNING((AE_INFO,
- "Invalid throttling state, reset\n"));
+ "Invalid throttling state, reset"));
state = 0;
ret = acpi_processor_set_throttling(pr, state);
if (ret)
DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5710Z"),
},
},
+ {
+ .callback = video_set_bqc_offset,
+ .ident = "eMachines E510",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "EMACHINES"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "eMachines E510"),
+ },
+ },
+ {
+ .callback = video_set_bqc_offset,
+ .ident = "Acer Aspire 5315",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5315"),
+ },
+ },
{}
};
return acpi_video_register();
}
-void __exit acpi_video_exit(void)
+void acpi_video_exit(void)
{
acpi_bus_unregister_driver(&acpi_video_bus);
AHCI_HFLAG_NO_HOTPLUG = (1 << 7), /* ignore PxSERR.DIAG.N */
AHCI_HFLAG_SECT255 = (1 << 8), /* max 255 sectors */
AHCI_HFLAG_YES_NCQ = (1 << 9), /* force NCQ cap on */
+ AHCI_HFLAG_NO_SUSPEND = (1 << 10), /* don't suspend */
/* ap->flags bits */
static int ahci_pci_device_suspend(struct pci_dev *pdev, pm_message_t mesg)
{
struct ata_host *host = dev_get_drvdata(&pdev->dev);
+ struct ahci_host_priv *hpriv = host->private_data;
void __iomem *mmio = host->iomap[AHCI_PCI_BAR];
u32 ctl;
+ if (mesg.event & PM_EVENT_SUSPEND &&
+ hpriv->flags & AHCI_HFLAG_NO_SUSPEND) {
+ dev_printk(KERN_ERR, &pdev->dev,
+ "BIOS update required for suspend/resume\n");
+ return -EIO;
+ }
+
if (mesg.event & PM_EVENT_SLEEP) {
/* AHCI spec rev1.1 section 8.3.3:
* Software must disable interrupts prior to requesting a
return false;
}
+static bool ahci_broken_suspend(struct pci_dev *pdev)
+{
+ static const struct dmi_system_id sysids[] = {
+ /*
+ * On HP dv[4-6] and HDX18 with earlier BIOSen, link
+ * to the harddisk doesn't become online after
+ * resuming from STR. Warn and fail suspend.
+ */
+ {
+ .ident = "dv4",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME,
+ "HP Pavilion dv4 Notebook PC"),
+ },
+ .driver_data = "F.30", /* cutoff BIOS version */
+ },
+ {
+ .ident = "dv5",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME,
+ "HP Pavilion dv5 Notebook PC"),
+ },
+ .driver_data = "F.16", /* cutoff BIOS version */
+ },
+ {
+ .ident = "dv6",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME,
+ "HP Pavilion dv6 Notebook PC"),
+ },
+ .driver_data = "F.21", /* cutoff BIOS version */
+ },
+ {
+ .ident = "HDX18",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME,
+ "HP HDX18 Notebook PC"),
+ },
+ .driver_data = "F.23", /* cutoff BIOS version */
+ },
+ { } /* terminate list */
+ };
+ const struct dmi_system_id *dmi = dmi_first_match(sysids);
+ const char *ver;
+
+ if (!dmi || pdev->bus->number || pdev->devfn != PCI_DEVFN(0x1f, 2))
+ return false;
+
+ ver = dmi_get_system_info(DMI_BIOS_VERSION);
+
+ return !ver || strcmp(ver, dmi->driver_data) < 0;
+}
+
static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
{
static int printed_version;
"quirky BIOS, skipping spindown on poweroff\n");
}
+ if (ahci_broken_suspend(pdev)) {
+ hpriv->flags |= AHCI_HFLAG_NO_SUSPEND;
+ dev_printk(KERN_WARNING, &pdev->dev,
+ "BIOS update required for suspend/resume\n");
+ }
+
/* CAP.NP sometimes indicate the index of the last enabled
* port, at other times, that of the last possible port, so
* determining the maximum port number requires looking at
/* PCI slot number of the controller */
.driver_data = (void *)0x1FUL,
},
+ {
+ .ident = "HP Compaq nc6000",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nc6000"),
+ },
+ /* PCI slot number of the controller */
+ .driver_data = (void *)0x1FUL,
+ },
{ } /* terminate list */
};
};
/* Revision 0x20 added DMA */
static const struct ata_port_info info_20 = {
- .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
+ ATA_FLAG_IGN_SIMPLEX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.port_ops = &ali_20_port_ops
};
/* Revision 0x20 with support logic added UDMA */
static const struct ata_port_info info_20_udma = {
- .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
+ ATA_FLAG_IGN_SIMPLEX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA2,
};
/* Revision 0xC2 adds UDMA66 */
static const struct ata_port_info info_c2 = {
- .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
+ ATA_FLAG_IGN_SIMPLEX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA4,
};
/* Revision 0xC3 is UDMA66 for now */
static const struct ata_port_info info_c3 = {
- .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
+ ATA_FLAG_IGN_SIMPLEX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA4,
};
/* Revision 0xC4 is UDMA100 */
static const struct ata_port_info info_c4 = {
- .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_PIO_LBA48 |
+ ATA_FLAG_IGN_SIMPLEX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA5,
};
/* Revision 0xC5 is UDMA133 with LBA48 DMA */
static const struct ata_port_info info_c5 = {
- .flags = ATA_FLAG_SLAVE_POSS,
+ .flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_IGN_SIMPLEX,
.pio_mask = ATA_PIO4,
.mwdma_mask = ATA_MWDMA2,
.udma_mask = ATA_UDMA6,
#include <linux/ata.h>
#define DRV_NAME "pata_efar"
-#define DRV_VERSION "0.4.4"
+#define DRV_VERSION "0.4.5"
/**
* efar_pre_reset - Enable bits
{ 2, 1 },
{ 2, 3 }, };
- if (pio > 2)
- control |= 1; /* TIME1 enable */
+ if (pio > 1)
+ control |= 1; /* TIME */
if (ata_pio_need_iordy(adev)) /* PIO 3/4 require IORDY */
- control |= 2; /* IE enable */
- /* Intel specifies that the PPE functionality is for disk only */
+ control |= 2; /* IE */
+ /* Intel specifies that the prefetch/posting is for disk only */
if (adev->class == ATA_DEV_ATA)
- control |= 4; /* PPE enable */
+ control |= 4; /* PPE */
pci_read_config_word(dev, idetm_port, &idetm_data);
- /* Enable PPE, IE and TIME as appropriate */
-
+ /* Set PPE, IE, and TIME as appropriate */
if (adev->devno == 0) {
idetm_data &= 0xCCF0;
idetm_data |= control;
pci_write_config_byte(dev, 0x44, slave_data);
}
- idetm_data |= 0x4000; /* Ensure SITRE is enabled */
+ idetm_data |= 0x4000; /* Ensure SITRE is set */
pci_write_config_word(dev, idetm_port, idetm_data);
}
*
*/
+#include <linux/async.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
&legacy_sht);
if (ret)
goto fail;
+ async_synchronize_full();
ld->platform_dev = pdev;
/* Nothing found means we drop the port as its probably not there */
/* No PIO or DMA methods needed for this device */
+static unsigned int netcell_read_id(struct ata_device *adev,
+ struct ata_taskfile *tf, u16 *id)
+{
+ unsigned int err_mask = ata_do_dev_read_id(adev, tf, id);
+ /* Firmware forgets to mark words 85-87 valid */
+ if (err_mask == 0)
+ id[ATA_ID_CSF_DEFAULT] |= 0x4000;
+ return err_mask;
+}
+
static struct scsi_host_template netcell_sht = {
ATA_BMDMA_SHT(DRV_NAME),
};
static struct ata_port_operations netcell_ops = {
.inherits = &ata_bmdma_port_ops,
- .cable_detect = ata_cable_80wire,
+ .cable_detect = ata_cable_80wire,
+ .read_id = netcell_read_id,
};
}
kobject_uevent(&priv->kobj, KOBJ_ADD);
- return error;
+ return 0;
out_unregister:
+ kfree(drv->p);
+ drv->p = NULL;
kobject_put(&priv->kobj);
out_put_bus:
bus_put(bus);
}
if (!dev_name(dev))
- goto done;
+ goto name_error;
pr_debug("device: '%s': %s\n", dev_name(dev), __func__);
cleanup_device_parent(dev);
if (parent)
put_device(parent);
+name_error:
+ kfree(dev->p);
+ dev->p = NULL;
goto done;
}
*/
void driver_unregister(struct device_driver *drv)
{
+ if (!drv || !drv->p) {
+ WARN(1, "Unexpected driver unregister!\n");
+ return;
+ }
driver_remove_groups(drv, drv->groups);
bus_remove_driver(drv);
}
break;
}
- gsi = acpi_register_gsi(irq, ACPI_LEVEL_SENSITIVE,
+ gsi = acpi_register_gsi(NULL, irq, ACPI_LEVEL_SENSITIVE,
ACPI_ACTIVE_LOW);
if (gsi > 0)
break;
irqp = &res->data.extended_irq;
for (i = 0; i < irqp->interrupt_count; i++) {
- irq = acpi_register_gsi(irqp->interrupts[i],
+ irq = acpi_register_gsi(NULL, irqp->interrupts[i],
irqp->triggering, irqp->polarity);
if (irq < 0)
return AE_ERROR;
written += chunk - unwritten;
if (unwritten)
break;
+ if (signal_pending(current))
+ return written ? written : -ERESTARTSYS;
buf += chunk;
count -= chunk;
cond_resched();
continue;
brd = &mxser_boards[m];
- retval = mxser_get_ISA_conf(!ioaddr[b], brd);
+ retval = mxser_get_ISA_conf(ioaddr[b], brd);
if (retval <= 0) {
brd->info = NULL;
continue;
ret = -ENOMEM;
goto nomem_out;
}
- if (!alloc_cpumask_var(&policy->related_cpus, GFP_KERNEL)) {
+ if (!zalloc_cpumask_var(&policy->related_cpus, GFP_KERNEL)) {
free_cpumask_var(policy->cpus);
kfree(policy);
ret = -ENOMEM;
static void set_ld_eol(struct fsl_dma_chan *fsl_chan,
struct fsl_desc_sw *desc)
{
+ u64 snoop_bits;
+
+ snoop_bits = ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_83XX)
+ ? FSL_DMA_SNEN : 0;
+
desc->hw.next_ln_addr = CPU_TO_DMA(fsl_chan,
- DMA_TO_CPU(fsl_chan, desc->hw.next_ln_addr, 64) | FSL_DMA_EOL,
- 64);
+ DMA_TO_CPU(fsl_chan, desc->hw.next_ln_addr, 64) | FSL_DMA_EOL
+ | snoop_bits, 64);
}
static void append_ld_queue(struct fsl_dma_chan *fsl_chan,
static dma_cookie_t fsl_dma_tx_submit(struct dma_async_tx_descriptor *tx)
{
- struct fsl_desc_sw *desc = tx_to_fsl_desc(tx);
struct fsl_dma_chan *fsl_chan = to_fsl_chan(tx->chan);
+ struct fsl_desc_sw *desc;
unsigned long flags;
dma_cookie_t cookie;
spin_lock_irqsave(&fsl_chan->desc_lock, flags);
cookie = fsl_chan->common.cookie;
- cookie++;
- if (cookie < 0)
- cookie = 1;
- desc->async_tx.cookie = cookie;
- fsl_chan->common.cookie = desc->async_tx.cookie;
+ list_for_each_entry(desc, &tx->tx_list, node) {
+ cookie++;
+ if (cookie < 0)
+ cookie = 1;
- append_ld_queue(fsl_chan, desc);
- list_splice_init(&desc->async_tx.tx_list, fsl_chan->ld_queue.prev);
+ desc->async_tx.cookie = cookie;
+ }
+
+ fsl_chan->common.cookie = cookie;
+ append_ld_queue(fsl_chan, tx_to_fsl_desc(tx));
+ list_splice_init(&tx->tx_list, fsl_chan->ld_queue.prev);
spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
{
struct fsl_dma_chan *fsl_chan;
struct fsl_desc_sw *first = NULL, *prev = NULL, *new;
+ struct list_head *list;
size_t copy;
- LIST_HEAD(link_chain);
if (!chan)
return NULL;
if (!new) {
dev_err(fsl_chan->dev,
"No free memory for link descriptor\n");
- return NULL;
+ goto fail;
}
#ifdef FSL_DMA_LD_DEBUG
dev_dbg(fsl_chan->dev, "new link desc alloc %p\n", new);
/* Set End-of-link to the last link descriptor of new list*/
set_ld_eol(fsl_chan, new);
- return first ? &first->async_tx : NULL;
+ return &first->async_tx;
+
+fail:
+ if (!first)
+ return NULL;
+
+ list = &first->async_tx.tx_list;
+ list_for_each_entry_safe_reverse(new, prev, list, node) {
+ list_del(&new->node);
+ dma_pool_free(fsl_chan->desc_pool, new, new->async_tx.phys);
+ }
+
+ return NULL;
}
/**
dma_addr_t next_dest_addr;
unsigned long flags;
+ spin_lock_irqsave(&fsl_chan->desc_lock, flags);
+
if (!dma_is_idle(fsl_chan))
- return;
+ goto out_unlock;
dma_halt(fsl_chan);
/* If there are some link descriptors
* not transfered in queue. We need to start it.
*/
- spin_lock_irqsave(&fsl_chan->desc_lock, flags);
/* Find the first un-transfer desciptor */
for (ld_node = fsl_chan->ld_queue.next;
fsl_chan->common.cookie) == DMA_SUCCESS);
ld_node = ld_node->next);
- spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
-
if (ld_node != &fsl_chan->ld_queue) {
/* Get the ld start address from ld_queue */
next_dest_addr = to_fsl_desc(ld_node)->async_tx.phys;
- dev_dbg(fsl_chan->dev, "xfer LDs staring from %p\n",
- (void *)next_dest_addr);
+ dev_dbg(fsl_chan->dev, "xfer LDs staring from 0x%llx\n",
+ (unsigned long long)next_dest_addr);
set_cdar(fsl_chan, next_dest_addr);
dma_start(fsl_chan);
} else {
set_cdar(fsl_chan, 0);
set_ndar(fsl_chan, 0);
}
+
+out_unlock:
+ spin_unlock_irqrestore(&fsl_chan->desc_lock, flags);
}
/**
*/
if (stat & FSL_DMA_SR_EOSI) {
dev_dbg(fsl_chan->dev, "event: End-of-segments INT\n");
- dev_dbg(fsl_chan->dev, "event: clndar %p, nlndar %p\n",
- (void *)get_cdar(fsl_chan), (void *)get_ndar(fsl_chan));
+ dev_dbg(fsl_chan->dev, "event: clndar 0x%llx, nlndar 0x%llx\n",
+ (unsigned long long)get_cdar(fsl_chan),
+ (unsigned long long)get_ndar(fsl_chan));
stat &= ~FSL_DMA_SR_EOSI;
update_cookie = 1;
}
new_fsl_chan->reg.end - new_fsl_chan->reg.start + 1);
new_fsl_chan->id = ((new_fsl_chan->reg.start - 0x100) & 0xfff) >> 7;
- if (new_fsl_chan->id > FSL_DMA_MAX_CHANS_PER_DEVICE) {
+ if (new_fsl_chan->id >= FSL_DMA_MAX_CHANS_PER_DEVICE) {
dev_err(fdev->dev, "There is no %d channel!\n",
new_fsl_chan->id);
err = -EINVAL;
}
dev_info(&dev->dev, "Probe the Freescale DMA driver for %s "
- "controller at %p...\n",
- match->compatible, (void *)fdev->reg.start);
+ "controller at 0x%llx...\n",
+ match->compatible, (unsigned long long)fdev->reg.start);
fdev->reg_base = ioremap(fdev->reg.start, fdev->reg.end
- fdev->reg.start + 1);
xfercap = (xfercap_scale == 0 ? -1 : (1UL << xfercap_scale));
#ifdef CONFIG_I7300_IDLE_IOAT_CHANNEL
- if (i7300_idle_platform_probe(NULL, NULL) == 0) {
+ if (i7300_idle_platform_probe(NULL, NULL, 1) == 0) {
device->common.chancnt--;
}
#endif
config EDAC_AMD8131
tristate "AMD8131 HyperTransport PCI-X Tunnel"
- depends on EDAC_MM_EDAC && PCI
+ depends on EDAC_MM_EDAC && PCI && PPC_MAPLE
help
Support for error detection and correction on the
AMD8131 HyperTransport PCI-X Tunnel chip.
+ Note, add more Kconfig dependency if it's adopted
+ on some machine other than Maple.
config EDAC_AMD8111
tristate "AMD8111 HyperTransport I/O Hub"
- depends on EDAC_MM_EDAC && PCI
+ depends on EDAC_MM_EDAC && PCI && PPC_MAPLE
help
Support for error detection and correction on the
AMD8111 HyperTransport I/O Hub chip.
+ Note, add more Kconfig dependency if it's adopted
+ on some machine other than Maple.
endif # EDAC
obj-$(CONFIG_EDAC_MV64X60) += mv64x60_edac.o
obj-$(CONFIG_EDAC_CELL) += cell_edac.o
obj-$(CONFIG_EDAC_PPC4XX) += ppc4xx_edac.o
+obj-$(CONFIG_EDAC_AMD8111) += amd8111_edac.o
+obj-$(CONFIG_EDAC_AMD8131) += amd8131_edac.o
dev_info->edac_dev->dev = &dev_info->dev->dev;
dev_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR;
dev_info->edac_dev->ctl_name = dev_info->ctl_name;
- dev_info->edac_dev->dev_name = dev_info->dev->dev.bus_id;
+ dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev);
if (edac_op_state == EDAC_OPSTATE_POLL)
dev_info->edac_dev->edac_check = dev_info->check;
pci_info->edac_dev->dev = &pci_info->dev->dev;
pci_info->edac_dev->mod_name = AMD8111_EDAC_MOD_STR;
pci_info->edac_dev->ctl_name = pci_info->ctl_name;
- pci_info->edac_dev->dev_name = pci_info->dev->dev.bus_id;
+ pci_info->edac_dev->dev_name = dev_name(&pci_info->dev->dev);
if (edac_op_state == EDAC_OPSTATE_POLL)
pci_info->edac_dev->edac_check = pci_info->check;
dev_info->edac_dev->dev = &dev_info->dev->dev;
dev_info->edac_dev->mod_name = AMD8131_EDAC_MOD_STR;
dev_info->edac_dev->ctl_name = dev_info->ctl_name;
- dev_info->edac_dev->dev_name = dev_info->dev->dev.bus_id;
+ dev_info->edac_dev->dev_name = dev_name(&dev_info->dev->dev);
if (edac_op_state == EDAC_OPSTATE_POLL)
dev_info->edac_dev->edac_check = amd8131_chipset.check;
will load the correct one.
config DRM_I915
+ tristate "i915 driver"
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB
select FRAMEBUFFER_CONSOLE if !EMBEDDED
- tristate "i915 driver"
+ # i915 depends on ACPI_VIDEO when ACPI is enabled
+ # but for select to work, need to select ACPI_VIDEO's dependencies, ick
+ select VIDEO_OUTPUT_CONTROL if ACPI
+ select BACKLIGHT_CLASS_DEVICE if ACPI
+ select INPUT if ACPI
+ select ACPI_VIDEO if ACPI
help
Choose this option if you have a system that has Intel 830M, 845G,
852GM, 855GM 865G or 915G integrated graphics. If M is selected, the
config DRM_I915_KMS
bool "Enable modesetting on intel by default"
depends on DRM_I915
- # i915 KMS depends on ACPI_VIDEO when ACPI is enabled
- # but for select to work, need to select ACPI_VIDEO's dependencies, ick
- select VIDEO_OUTPUT_CONTROL if ACPI
- select BACKLIGHT_CLASS_DEVICE if ACPI
- select INPUT if ACPI
- select ACPI_VIDEO if ACPI
help
Choose this option if you want kernel modesetting enabled by default,
and you have a new enough userspace to support this. Running old
}
}
- if (connector->funcs->set_property)
+ /* Do DPMS ourselves */
+ if (property == connector->dev->mode_config.dpms_property) {
+ if (connector->funcs->dpms)
+ (*connector->funcs->dpms)(connector, (int) out_resp->value);
+ ret = 0;
+ } else if (connector->funcs->set_property)
ret = connector->funcs->set_property(connector, property, out_resp->value);
/* store the property value if succesful */
}
}
+/**
+ * drm_helper_encoder_in_use - check if a given encoder is in use
+ * @encoder: encoder to check
+ *
+ * LOCKING:
+ * Caller must hold mode config lock.
+ *
+ * Walk @encoders's DRM device's mode_config and see if it's in use.
+ *
+ * RETURNS:
+ * True if @encoder is part of the mode_config, false otherwise.
+ */
+bool drm_helper_encoder_in_use(struct drm_encoder *encoder)
+{
+ struct drm_connector *connector;
+ struct drm_device *dev = encoder->dev;
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+ if (connector->encoder == encoder)
+ return true;
+ return false;
+}
+EXPORT_SYMBOL(drm_helper_encoder_in_use);
+
/**
* drm_helper_crtc_in_use - check if a given CRTC is in a mode_config
* @crtc: CRTC to check
struct drm_device *dev = crtc->dev;
/* FIXME: Locking around list access? */
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head)
- if (encoder->crtc == crtc)
+ if (encoder->crtc == crtc && drm_helper_encoder_in_use(encoder))
return true;
return false;
}
list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
encoder_funcs = encoder->helper_private;
- if (!encoder->crtc)
+ if (!drm_helper_encoder_in_use(encoder))
(*encoder_funcs->dpms)(encoder, DRM_MODE_DPMS_OFF);
}
}
EXPORT_SYMBOL(drm_helper_initial_config);
+static int drm_helper_choose_encoder_dpms(struct drm_encoder *encoder)
+{
+ int dpms = DRM_MODE_DPMS_OFF;
+ struct drm_connector *connector;
+ struct drm_device *dev = encoder->dev;
+
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+ if (connector->encoder == encoder)
+ if (connector->dpms < dpms)
+ dpms = connector->dpms;
+ return dpms;
+}
+
+static int drm_helper_choose_crtc_dpms(struct drm_crtc *crtc)
+{
+ int dpms = DRM_MODE_DPMS_OFF;
+ struct drm_connector *connector;
+ struct drm_device *dev = crtc->dev;
+
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+ if (connector->encoder && connector->encoder->crtc == crtc)
+ if (connector->dpms < dpms)
+ dpms = connector->dpms;
+ return dpms;
+}
+
+/**
+ * drm_helper_connector_dpms
+ * @connector affected connector
+ * @mode DPMS mode
+ *
+ * Calls the low-level connector DPMS function, then
+ * calls appropriate encoder and crtc DPMS functions as well
+ */
+void drm_helper_connector_dpms(struct drm_connector *connector, int mode)
+{
+ struct drm_encoder *encoder = connector->encoder;
+ struct drm_crtc *crtc = encoder ? encoder->crtc : NULL;
+ int old_dpms;
+
+ if (mode == connector->dpms)
+ return;
+
+ old_dpms = connector->dpms;
+ connector->dpms = mode;
+
+ /* from off to on, do crtc then encoder */
+ if (mode < old_dpms) {
+ if (crtc) {
+ struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+ if (crtc_funcs->dpms)
+ (*crtc_funcs->dpms) (crtc,
+ drm_helper_choose_crtc_dpms(crtc));
+ }
+ if (encoder) {
+ struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
+ if (encoder_funcs->dpms)
+ (*encoder_funcs->dpms) (encoder,
+ drm_helper_choose_encoder_dpms(encoder));
+ }
+ }
+
+ /* from on to off, do encoder then crtc */
+ if (mode > old_dpms) {
+ if (encoder) {
+ struct drm_encoder_helper_funcs *encoder_funcs = encoder->helper_private;
+ if (encoder_funcs->dpms)
+ (*encoder_funcs->dpms) (encoder,
+ drm_helper_choose_encoder_dpms(encoder));
+ }
+ if (crtc) {
+ struct drm_crtc_helper_funcs *crtc_funcs = crtc->helper_private;
+ if (crtc_funcs->dpms)
+ (*crtc_funcs->dpms) (crtc,
+ drm_helper_choose_crtc_dpms(crtc));
+ }
+ }
+
+ return;
+}
+EXPORT_SYMBOL(drm_helper_connector_dpms);
+
/**
* drm_hotplug_stage_two
* @dev DRM device
struct drm_display_mode *mode;
struct detailed_pixel_timing *pt = &timing->data.pixel_data;
+ /* ignore tiny modes */
+ if (((pt->hactive_hi << 8) | pt->hactive_lo) < 64 ||
+ ((pt->vactive_hi << 8) | pt->hactive_lo) < 64)
+ return NULL;
+
if (pt->stereo) {
printk(KERN_WARNING "stereo mode not supported\n");
return NULL;
{
int ret = 0;
unsigned long sh_flags = 0;
+ char *irqname;
if (!drm_core_check_feature(dev, DRIVER_HAVE_IRQ))
return -EINVAL;
if (drm_core_check_feature(dev, DRIVER_IRQ_SHARED))
sh_flags = IRQF_SHARED;
+ if (dev->devname)
+ irqname = dev->devname;
+ else
+ irqname = dev->driver->name;
+
ret = request_irq(drm_dev_to_irq(dev), dev->driver->irq_handler,
- sh_flags, dev->devname, dev);
+ sh_flags, irqname, dev);
if (ret < 0) {
mutex_lock(&dev->struct_mutex);
enum drm_connector_status status;
status = connector->funcs->detect(connector);
- return snprintf(buf, PAGE_SIZE, "%s",
+ return snprintf(buf, PAGE_SIZE, "%s\n",
drm_get_connector_status_name(status));
}
if (ret)
return 0;
- return snprintf(buf, PAGE_SIZE, "%s",
+ return snprintf(buf, PAGE_SIZE, "%s\n",
drm_get_dpms_name((int)dpms_status));
}
{
struct drm_connector *connector = to_drm_connector(device);
- return snprintf(buf, PAGE_SIZE, connector->encoder ? "enabled" :
+ return snprintf(buf, PAGE_SIZE, "%s\n", connector->encoder ? "enabled" :
"disabled");
}
static struct bin_attribute edid_attr = {
.attr.name = "edid",
+ .attr.mode = 0444,
.size = 128,
.read = edid_show,
};
int fb_bar = IS_I9XX(dev) ? 2 : 0;
int ret = 0;
- dev->devname = kstrdup(DRIVER_NAME, GFP_KERNEL);
- if (!dev->devname) {
- ret = -ENOMEM;
- goto out;
- }
-
dev->mode_config.fb_base = drm_get_resource_start(dev, fb_bar) &
0xff000000;
ret = i915_probe_agp(dev, &agp_size, &prealloc_size);
if (ret)
- goto kfree_devname;
+ goto out;
/* Basic memrange allocator for stolen space (aka vram) */
drm_mm_init(&dev_priv->vram, 0, prealloc_size);
ret = i915_gem_init_ringbuffer(dev);
if (ret)
- goto kfree_devname;
+ goto out;
/* Allow hardware batchbuffers unless told otherwise.
*/
destroy_ringbuffer:
i915_gem_cleanup_ringbuffer(dev);
-kfree_devname:
- kfree(dev->devname);
out:
return ret;
}
mutex_unlock(&dev->struct_mutex);
return VM_FAULT_SIGBUS;
}
+
+ ret = i915_gem_object_set_to_gtt_domain(obj, write);
+ if (ret) {
+ mutex_unlock(&dev->struct_mutex);
+ return VM_FAULT_SIGBUS;
+ }
+
list_add_tail(&obj_priv->list, &dev_priv->mm.inactive_list);
}
return;
}
- pitch_val = (obj_priv->stride / 128) - 1;
- WARN_ON(pitch_val & ~0x0000000f);
+ pitch_val = obj_priv->stride / 128;
+ pitch_val = ffs(pitch_val) - 1;
+ WARN_ON(pitch_val > I830_FENCE_MAX_PITCH_VAL);
+
val = obj_priv->gtt_offset;
if (obj_priv->tiling_mode == I915_TILING_Y)
val |= 1 << I830_FENCE_TILING_Y_SHIFT;
goto try_again;
}
- BUG_ON(old_obj_priv->active ||
- (reg->obj->write_domain & I915_GEM_GPU_DOMAINS));
-
/*
* Zap this virtual mapping so we can set up a fence again
* for this object next time we need it.
if (obj_priv->pages == NULL)
return;
+ /* XXX: The 865 in particular appears to be weird in how it handles
+ * cache flushing. We haven't figured it out, but the
+ * clflush+agp_chipset_flush doesn't appear to successfully get the
+ * data visible to the PGU, while wbinvd + agp_chipset_flush does.
+ */
+ if (IS_I865G(obj->dev)) {
+ wbinvd();
+ return;
+ }
+
drm_clflush_pages(obj_priv->pages, obj->size / PAGE_SIZE);
}
if (tiling_mode == I915_TILING_NONE)
return true;
- if (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev))
+ if (!IS_I9XX(dev) ||
+ (tiling_mode == I915_TILING_Y && HAS_128_BYTE_Y_TILING(dev)))
tile_width = 128;
else
tile_width = 512;
if (stride / 128 > I965_FENCE_MAX_PITCH_VAL)
return false;
} else if (IS_I9XX(dev)) {
- if (stride / tile_width > I830_FENCE_MAX_PITCH_VAL ||
+ uint32_t pitch_val = ffs(stride / tile_width) - 1;
+
+ /* XXX: For Y tiling, FENCE_MAX_PITCH_VAL is actually 6 (8KB)
+ * instead of 4 (2KB) on 945s.
+ */
+ if (pitch_val > I915_FENCE_MAX_PITCH_VAL ||
size > (I830_FENCE_MAX_SIZE_VAL << 20))
return false;
} else {
- if (stride / 128 > I830_FENCE_MAX_PITCH_VAL ||
+ uint32_t pitch_val = ffs(stride / tile_width) - 1;
+
+ if (pitch_val > I830_FENCE_MAX_PITCH_VAL ||
size > (I830_FENCE_MAX_SIZE_VAL << 19))
return false;
}
#define I830_FENCE_SIZE_BITS(size) ((ffs((size) >> 19) - 1) << 8)
#define I830_FENCE_PITCH_SHIFT 4
#define I830_FENCE_REG_VALID (1<<0)
-#define I830_FENCE_MAX_PITCH_VAL 0x10
+#define I915_FENCE_MAX_PITCH_VAL 0x10
+#define I830_FENCE_MAX_PITCH_VAL 6
#define I830_FENCE_MAX_SIZE_VAL (1<<8)
#define I915_FENCE_START_MASK 0x0ff00000
struct drm_property *property,
uint64_t value)
{
- struct drm_device *dev = connector->dev;
-
- if (property == dev->mode_config.dpms_property && connector->encoder)
- intel_crt_dpms(connector->encoder, (uint32_t)(value & 0xf));
-
return 0;
}
};
static const struct drm_connector_funcs intel_crt_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
.detect = intel_crt_detect,
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = intel_crt_destroy,
};
static const struct drm_connector_funcs intel_dvo_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
.save = intel_dvo_save,
.restore = intel_dvo_restore,
.detect = intel_dvo_detect,
};
static const struct drm_connector_funcs intel_hdmi_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
.save = intel_hdmi_save,
.restore = intel_hdmi_restore,
.detect = intel_hdmi_detect,
struct drm_property *property,
uint64_t value)
{
- struct drm_device *dev = connector->dev;
-
- if (property == dev->mode_config.dpms_property && connector->encoder)
- intel_lvds_dpms(connector->encoder, (uint32_t)(value & 0xf));
-
return 0;
}
};
static const struct drm_connector_funcs intel_lvds_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
.save = intel_lvds_save,
.restore = intel_lvds_restore,
.detect = intel_lvds_detect,
}
/* These systems claim to have LVDS, but really don't */
-static const struct dmi_system_id __initdata intel_no_lvds[] = {
+static const struct dmi_system_id intel_no_lvds[] = {
{
.callback = intel_no_lvds_dmi_callback,
.ident = "Apple Mac Mini (Core series)",
};
static const struct drm_connector_funcs intel_sdvo_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
.save = intel_sdvo_save,
.restore = intel_sdvo_restore,
.detect = intel_sdvo_detect,
};
static const struct drm_connector_funcs intel_tv_connector_funcs = {
+ .dpms = drm_helper_connector_dpms,
.save = intel_tv_save,
.restore = intel_tv_restore,
.detect = intel_tv_detect,
/* check if the ring is padded out to 16-dword alignment */
- tail_aligned = dev_priv->ring.tail & 0xf;
+ tail_aligned = dev_priv->ring.tail & (RADEON_RING_ALIGN-1);
if (tail_aligned) {
- int num_p2 = 16 - tail_aligned;
+ int num_p2 = RADEON_RING_ALIGN - tail_aligned;
ring = dev_priv->ring.start;
/* pad with some CP_PACKET2 */
#define RING_LOCALS int write, _nr, _align_nr; unsigned int mask; u32 *ring;
+#define RADEON_RING_ALIGN 16
+
#define BEGIN_RING( n ) do { \
if ( RADEON_VERBOSE ) { \
DRM_INFO( "BEGIN_RING( %d )\n", (n)); \
} \
- _align_nr = (n + 0xf) & ~0xf; \
+ _align_nr = RADEON_RING_ALIGN - ((dev_priv->ring.tail + n) & (RADEON_RING_ALIGN-1)); \
+ _align_nr += n; \
if (dev_priv->ring.space <= (_align_nr * sizeof(u32))) { \
COMMIT_RING(); \
radeon_wait_ring( dev_priv, _align_nr * sizeof(u32)); \
.name = "lm78",
},
.probe = lm78_isa_probe,
- .remove = lm78_isa_remove,
+ .remove = __devexit_p(lm78_isa_remove),
};
module_param_named(all_generic_ide, ide_generic_all, bool, 0444);
MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE storage controllers.");
+static void netcell_quirkproc(ide_drive_t *drive)
+{
+ /* mark words 85-87 as valid */
+ drive->id[ATA_ID_CSF_DEFAULT] |= 0x4000;
+}
+
+static const struct ide_port_ops netcell_port_ops = {
+ .quirkproc = netcell_quirkproc,
+};
+
#define DECLARE_GENERIC_PCI_DEV(extra_flags) \
{ \
.name = DRV_NAME, \
{ /* 6: Revolution */
.name = DRV_NAME,
+ .port_ops = &netcell_port_ops,
.host_flags = IDE_HFLAG_CLEAR_SIMPLEX |
IDE_HFLAG_TRUST_BIOS_FOR_DMA |
IDE_HFLAG_OFF_BOARD,
/*
* Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2006-2007 MontaVista Software, Inc.
+ * Copyright (C) 2006-2007, 2009 MontaVista Software, Inc.
* Copyright (C) 2007 Bartlomiej Zolnierkiewicz
*
* Portions Copyright (C) 1999 Promise Technology, Inc.
return (dma_stat & 4) == 4; /* return 1 if INTR asserted */
}
-static void pdc202xx_reset_host (ide_hwif_t *hwif)
+static void pdc202xx_reset(ide_drive_t *drive)
{
+ ide_hwif_t *hwif = drive->hwif;
unsigned long high_16 = hwif->extra_base - 16;
u8 udma_speed_flag = inb(high_16 | 0x001f);
+ printk(KERN_WARNING "PDC202xx: software reset...\n");
+
outb(udma_speed_flag | 0x10, high_16 | 0x001f);
mdelay(100);
outb(udma_speed_flag & ~0x10, high_16 | 0x001f);
mdelay(2000); /* 2 seconds ?! */
- printk(KERN_WARNING "PDC202XX: %s channel reset.\n",
- hwif->channel ? "Secondary" : "Primary");
-}
-
-static void pdc202xx_reset (ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- ide_hwif_t *mate = hwif->mate;
-
- pdc202xx_reset_host(hwif);
- pdc202xx_reset_host(mate);
-
ide_set_max_pio(drive);
}
.dma_start = ide_dma_start,
.dma_end = ide_dma_end,
.dma_test_irq = pdc202xx_dma_test_irq,
- .dma_lost_irq = pdc202xx_dma_lost_irq,
+ .dma_lost_irq = ide_dma_lost_irq,
.dma_timer_expiry = ide_dma_sff_timer_expiry,
- .dma_clear = pdc202xx_reset,
.dma_sff_read_status = ide_dma_sff_read_status,
};
module_param_named(debug, debug, uint, 0644);
MODULE_PARM_DESC(debug, "Enable debug printks in this driver");
+static int forceload;
+module_param_named(forceload, forceload, uint, 0644);
+MODULE_PARM_DESC(debug, "Enable driver testing on unvalidated i5000");
+
#define dprintk(fmt, arg...) \
do { if (debug) printk(KERN_INFO I7300_PRINT fmt, ##arg); } while (0)
cpus_clear(idle_cpumask);
total_us = 0;
- if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev))
+ if (i7300_idle_platform_probe(&fbd_dev, &ioat_dev, forceload))
return -ENODEV;
if (i7300_idle_thrt_save())
ABS_MT_POSITION_Y,
ABS_MT_TOOL_TYPE,
ABS_MT_BLOB_ID,
+ ABS_MT_TRACKING_ID,
0
};
static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)];
timeout = wait_event_timeout(ps2dev->wait,
!(ps2dev->flags & PS2_FLAG_CMD1), timeout);
- if (ps2dev->cmdcnt && timeout > 0) {
+ if (ps2dev->cmdcnt && !(ps2dev->flags & PS2_FLAG_CMD1)) {
timeout = ps2_adjust_timeout(ps2dev, command, timeout);
wait_event_timeout(ps2dev->wait,
#ifdef CONFIG_PM
static int ucb1400_ts_resume(struct platform_device *dev)
{
- struct ucb1400_ts *ucb = platform_get_drvdata(dev);
+ struct ucb1400_ts *ucb = dev->dev.platform_data;
if (ucb->ts_task) {
/*
static struct stripe_head *
get_active_stripe(raid5_conf_t *conf, sector_t sector,
- int previous, int noblock)
+ int previous, int noblock, int noquiesce)
{
struct stripe_head *sh;
do {
wait_event_lock_irq(conf->wait_for_stripe,
- conf->quiesce == 0,
+ conf->quiesce == 0 || noquiesce,
conf->device_lock, /* nothing */);
sh = __find_stripe(conf, sector, conf->generation - previous);
if (!sh) {
sector_t bn = compute_blocknr(sh, i, 1);
sector_t s = raid5_compute_sector(conf, bn, 0,
&dd_idx, NULL);
- sh2 = get_active_stripe(conf, s, 0, 1);
+ sh2 = get_active_stripe(conf, s, 0, 1, 1);
if (sh2 == NULL)
/* so far only the early blocks of this stripe
* have been requested. When later blocks
/* Finish reconstruct operations initiated by the expansion process */
if (sh->reconstruct_state == reconstruct_state_result) {
struct stripe_head *sh2
- = get_active_stripe(conf, sh->sector, 1, 1);
+ = get_active_stripe(conf, sh->sector, 1, 1, 1);
if (sh2 && test_bit(STRIPE_EXPAND_SOURCE, &sh2->state)) {
/* sh cannot be written until sh2 has been read.
* so arrange for sh to be delayed a little
if (s.expanded && test_bit(STRIPE_EXPANDING, &sh->state)) {
struct stripe_head *sh2
- = get_active_stripe(conf, sh->sector, 1, 1);
+ = get_active_stripe(conf, sh->sector, 1, 1, 1);
if (sh2 && test_bit(STRIPE_EXPAND_SOURCE, &sh2->state)) {
/* sh cannot be written until sh2 has been read.
* so arrange for sh to be delayed a little
int i;
rcu_read_lock();
- for (i=0; i<mddev->raid_disks; i++) {
+ for (i = 0; i < conf->raid_disks; i++) {
mdk_rdev_t *rdev = rcu_dereference(conf->disks[i].rdev);
if (rdev && !test_bit(Faulty, &rdev->flags) && atomic_read(&rdev->nr_pending)) {
struct request_queue *r_queue = bdev_get_queue(rdev->bdev);
(unsigned long long)logical_sector);
sh = get_active_stripe(conf, new_sector, previous,
- (bi->bi_rw&RWA_MASK));
+ (bi->bi_rw&RWA_MASK), 0);
if (sh) {
if (unlikely(previous)) {
/* expansion might have moved on while waiting for a
safepos = conf->reshape_safe;
sector_div(safepos, data_disks);
if (mddev->delta_disks < 0) {
- writepos -= min(reshape_sectors, writepos);
+ writepos -= min_t(sector_t, reshape_sectors, writepos);
readpos += reshape_sectors;
safepos += reshape_sectors;
} else {
writepos += reshape_sectors;
- readpos -= min(reshape_sectors, readpos);
- safepos -= min(reshape_sectors, safepos);
+ readpos -= min_t(sector_t, reshape_sectors, readpos);
+ safepos -= min_t(sector_t, reshape_sectors, safepos);
}
/* 'writepos' is the most advanced device address we might write.
for (i = 0; i < reshape_sectors; i += STRIPE_SECTORS) {
int j;
int skipped = 0;
- sh = get_active_stripe(conf, stripe_addr+i, 0, 0);
+ sh = get_active_stripe(conf, stripe_addr+i, 0, 0, 1);
set_bit(STRIPE_EXPANDING, &sh->state);
atomic_inc(&conf->reshape_stripes);
/* If any of this stripe is beyond the end of the old
raid5_compute_sector(conf, stripe_addr*(new_data_disks),
1, &dd_idx, NULL);
last_sector =
- raid5_compute_sector(conf, ((stripe_addr+conf->chunk_size/512)
+ raid5_compute_sector(conf, ((stripe_addr+reshape_sectors)
*(new_data_disks) - 1),
1, &dd_idx, NULL);
if (last_sector >= mddev->dev_sectors)
last_sector = mddev->dev_sectors - 1;
while (first_sector <= last_sector) {
- sh = get_active_stripe(conf, first_sector, 1, 0);
+ sh = get_active_stripe(conf, first_sector, 1, 0, 1);
set_bit(STRIPE_EXPAND_SOURCE, &sh->state);
set_bit(STRIPE_HANDLE, &sh->state);
release_stripe(sh);
bitmap_cond_end_sync(mddev->bitmap, sector_nr);
- sh = get_active_stripe(conf, sector_nr, 0, 1);
+ sh = get_active_stripe(conf, sector_nr, 0, 1, 0);
if (sh == NULL) {
- sh = get_active_stripe(conf, sector_nr, 0, 0);
+ sh = get_active_stripe(conf, sector_nr, 0, 0, 0);
/* make sure we don't swamp the stripe cache if someone else
* is trying to get access
*/
* We don't need to check the 'failed' flag as when that gets set,
* recovery aborts.
*/
- for (i=0; i<mddev->raid_disks; i++)
+ for (i = 0; i < conf->raid_disks; i++)
if (conf->disks[i].rdev == NULL)
still_degraded = 1;
/* already done this stripe */
continue;
- sh = get_active_stripe(conf, sector, 0, 1);
+ sh = get_active_stripe(conf, sector, 0, 1, 0);
if (!sh) {
/* failed to get a stripe - must wait */
return -ENOMEM;
}
if (ivtv_might_use_dma(s)) {
- s->sg_handle = pci_map_single(itv->pdev, s->sg_dma, sizeof(struct ivtv_sg_element), s->dma);
+ s->sg_handle = pci_map_single(itv->pdev, s->sg_dma,
+ sizeof(struct ivtv_sg_element), PCI_DMA_TODEVICE);
ivtv_stream_sync_for_cpu(s);
}
unsigned int tmout;
int tmout_index;
+ /*
+ * Hardware weirdness. The FIFO_EMPTY bit of the HW_STATE
+ * register is sometimes not set before a while when some
+ * "unusual" data block sizes are used (such as with the SWITCH
+ * command), even despite the fact that the XFER_DONE interrupt
+ * was raised. And if another data transfer starts before
+ * this bit comes to good sense (which eventually happens by
+ * itself) then the new transfer simply fails with a timeout.
+ */
+ if (!(mvsd_read(MVSD_HW_STATE) & (1 << 13))) {
+ unsigned long t = jiffies + HZ;
+ unsigned int hw_state, count = 0;
+ do {
+ if (time_after(jiffies, t)) {
+ dev_warn(host->dev, "FIFO_EMPTY bit missing\n");
+ break;
+ }
+ hw_state = mvsd_read(MVSD_HW_STATE);
+ count++;
+ } while (!(hw_state & (1 << 13)));
+ dev_dbg(host->dev, "*** wait for FIFO_EMPTY bit "
+ "(hw=0x%04x, count=%d, jiffies=%ld)\n",
+ hw_state, count, jiffies - (t - HZ));
+ }
+
/* If timeout=0 then maximum timeout index is used. */
tmout = DIV_ROUND_UP(data->timeout_ns, host->ns_per_clk);
tmout += data->timeout_clks;
if (ios->bus_width == MMC_BUS_WIDTH_4)
ctrl_reg |= MVSD_HOST_CTRL_DATA_WIDTH_4_BITS;
+ /*
+ * The HI_SPEED_EN bit is causing trouble with many (but not all)
+ * high speed SD, SDHC and SDIO cards. Not enabling that bit
+ * makes all cards work. So let's just ignore that bit for now
+ * and revisit this issue if problems for not enabling this bit
+ * are ever reported.
+ */
+#if 0
if (ios->timing == MMC_TIMING_MMC_HS ||
ios->timing == MMC_TIMING_SD_HS)
ctrl_reg |= MVSD_HOST_CTRL_HI_SPEED_EN;
+#endif
host->ctrl = ctrl_reg;
mvsd_write(MVSD_HOST_CTRL, ctrl_reg);
MODULE_AUTHOR("Maen Suleiman, Nicolas Pitre");
MODULE_DESCRIPTION("Marvell MMC,SD,SDIO Host Controller driver");
MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:mvsdio");
struct work_struct datawork;
};
+static void mxcmci_set_clk_rate(struct mxcmci_host *host, unsigned int clk_ios);
+
static inline int mxcmci_use_dma(struct mxcmci_host *host)
{
return host->do_dma;
writew(0xff, host->base + MMC_REG_RES_TO);
}
-static void mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
+static int mxcmci_setup_data(struct mxcmci_host *host, struct mmc_data *data)
{
unsigned int nob = data->blocks;
unsigned int blksz = data->blksz;
#ifdef HAS_DMA
struct scatterlist *sg;
int i;
+ int ret;
#endif
if (data->flags & MMC_DATA_STREAM)
nob = 0xffff;
for_each_sg(data->sg, sg, data->sg_len, i) {
if (sg->offset & 3 || sg->length & 3) {
host->do_dma = 0;
- return;
+ return 0;
}
}
host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg,
data->sg_len, host->dma_dir);
- imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize,
- host->res->start + MMC_REG_BUFFER_ACCESS,
- DMA_MODE_READ);
+ ret = imx_dma_setup_sg(host->dma, data->sg, host->dma_nents,
+ datasize,
+ host->res->start + MMC_REG_BUFFER_ACCESS,
+ DMA_MODE_READ);
} else {
host->dma_dir = DMA_TO_DEVICE;
host->dma_nents = dma_map_sg(mmc_dev(host->mmc), data->sg,
data->sg_len, host->dma_dir);
- imx_dma_setup_sg(host->dma, data->sg, host->dma_nents, datasize,
- host->res->start + MMC_REG_BUFFER_ACCESS,
- DMA_MODE_WRITE);
+ ret = imx_dma_setup_sg(host->dma, data->sg, host->dma_nents,
+ datasize,
+ host->res->start + MMC_REG_BUFFER_ACCESS,
+ DMA_MODE_WRITE);
}
+ if (ret) {
+ dev_err(mmc_dev(host->mmc), "failed to setup DMA : %d\n", ret);
+ return ret;
+ }
wmb();
imx_dma_enable(host->dma);
#endif /* HAS_DMA */
+ return 0;
}
static int mxcmci_start_cmd(struct mxcmci_host *host, struct mmc_command *cmd,
stat = readl(host->base + MMC_REG_STATUS);
if (stat & STATUS_ERR_MASK)
return stat;
- if (time_after(jiffies, timeout))
+ if (time_after(jiffies, timeout)) {
+ mxcmci_softreset(host);
+ mxcmci_set_clk_rate(host, host->clock);
return STATUS_TIME_OUT_READ;
+ }
if (stat & mask)
return 0;
cpu_relax();
{
struct mxcmci_host *host = mmc_priv(mmc);
unsigned int cmdat = host->cmdat;
+ int error;
WARN_ON(host->req != NULL);
host->do_dma = 1;
#endif
if (req->data) {
- mxcmci_setup_data(host, req->data);
+ error = mxcmci_setup_data(host, req->data);
+ if (error) {
+ req->cmd->error = error;
+ goto out;
+ }
+
cmdat |= CMD_DAT_CONT_DATA_ENABLE;
cmdat |= CMD_DAT_CONT_WRITE;
}
- if (mxcmci_start_cmd(host, req->cmd, cmdat))
+ error = mxcmci_start_cmd(host, req->cmd, cmdat);
+out:
+ if (error)
mxcmci_finish_request(host, req);
}
goto out_clk_put;
}
- mmc->f_min = clk_get_rate(host->clk) >> 7;
+ mmc->f_min = clk_get_rate(host->clk) >> 16;
+ if (mmc->f_min < 400000)
+ mmc->f_min = 400000;
mmc->f_max = clk_get_rate(host->clk) >> 1;
/* recommended in data sheet */
del_timer(&host->cmd_abort_timer);
host->abort = 1;
OMAP_MMC_WRITE(host, IE, 0);
- disable_irq(host->irq);
+ disable_irq_nosync(host->irq);
schedule_work(&host->cmd_abort_work);
return IRQ_HANDLED;
}
host->dma_ch = -1;
/*
* DMA Callback: run in interrupt context.
- * mutex_unlock will through a kernel warning if used.
+ * mutex_unlock will throw a kernel warning if used.
*/
up(&host->sem);
}
static u16 esdhc_readw(struct sdhci_host *host, int reg)
{
- return in_be16(host->ioaddr + (reg ^ 0x2));
+ u16 ret;
+
+ if (unlikely(reg == SDHCI_HOST_VERSION))
+ ret = in_be16(host->ioaddr + reg);
+ else
+ ret = in_be16(host->ioaddr + (reg ^ 0x2));
+ return ret;
}
static u8 esdhc_readb(struct sdhci_host *host, int reg)
static const struct of_device_id sdhci_of_match[] = {
{ .compatible = "fsl,mpc8379-esdhc", .data = &sdhci_esdhc, },
{ .compatible = "fsl,mpc8536-esdhc", .data = &sdhci_esdhc, },
+ { .compatible = "fsl,esdhc", .data = &sdhci_esdhc, },
{ .compatible = "generic-sdhci", },
{},
};
}
info->chip.ecc.mode = ecc_mode;
- info->clk = clk_get(&pdev->dev, "AEMIFCLK");
+ info->clk = clk_get(&pdev->dev, "aemif");
if (IS_ERR(info->clk)) {
ret = PTR_ERR(info->clk);
- dev_dbg(&pdev->dev, "unable to get AEMIFCLK, err %d\n", ret);
+ dev_dbg(&pdev->dev, "unable to get AEMIF clock, err %d\n", ret);
goto err_clk;
}
ret = clk_enable(info->clk);
if (ret < 0) {
- dev_dbg(&pdev->dev, "unable to enable AEMIFCLK, err %d\n", ret);
+ dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n",
+ ret);
goto err_clk_enable;
}
break;
case NAND_CMD_READID:
+ host->col_addr = 0;
send_read_id(host);
break;
mtd->priv = this;
mtd->owner = THIS_MODULE;
mtd->dev.parent = &pdev->dev;
+ mtd->name = "mxc_nand";
/* 50 us command delay time */
this->chip_delay = 5;
this->verify_buf = mxc_nand_verify_buf;
host->clk = clk_get(&pdev->dev, "nfc");
- if (IS_ERR(host->clk))
+ if (IS_ERR(host->clk)) {
+ err = PTR_ERR(host->clk);
goto eclk;
+ }
clk_enable(host->clk);
host->clk_act = 1;
host->regs = ioremap(res->start, res->end - res->start + 1);
if (!host->regs) {
- err = -EIO;
+ err = -ENOMEM;
goto eres;
}
#ifdef CONFIG_PM
static int mxcnd_suspend(struct platform_device *pdev, pm_message_t state)
{
- struct mtd_info *info = platform_get_drvdata(pdev);
+ struct mtd_info *mtd = platform_get_drvdata(pdev);
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
int ret = 0;
DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND suspend\n");
- if (info)
- ret = info->suspend(info);
-
- /* Disable the NFC clock */
- clk_disable(nfc_clk); /* FIXME */
+ if (mtd) {
+ ret = mtd->suspend(mtd);
+ /* Disable the NFC clock */
+ clk_disable(host->clk);
+ }
return ret;
}
static int mxcnd_resume(struct platform_device *pdev)
{
- struct mtd_info *info = platform_get_drvdata(pdev);
+ struct mtd_info *mtd = platform_get_drvdata(pdev);
+ struct nand_chip *nand_chip = mtd->priv;
+ struct mxc_nand_host *host = nand_chip->priv;
int ret = 0;
DEBUG(MTD_DEBUG_LEVEL0, "MXC_ND : NAND resume\n");
- /* Enable the NFC clock */
- clk_enable(nfc_clk); /* FIXME */
- if (info)
- info->resume(info);
+ if (mtd) {
+ /* Enable the NFC clock */
+ clk_enable(host->clk);
+ mtd->resume(mtd);
+ }
return ret;
}
static int __init mxc_nd_init(void)
{
- /* Register the device driver structure. */
- pr_info("MXC MTD nand Driver\n");
- if (platform_driver_probe(&mxcnd_driver, mxcnd_probe) != 0) {
- printk(KERN_ERR "Driver register failed for mxcnd_driver\n");
- return -ENODEV;
- }
- return 0;
+ return platform_driver_probe(&mxcnd_driver, mxcnd_probe);
}
static void __exit mxc_nd_cleanup(void)
#ifdef CONFIG_EISA
static struct eisa_device_id el3_eisa_ids[] = {
+ { "TCM5090" },
+ { "TCM5091" },
{ "TCM5092" },
{ "TCM5093" },
+ { "TCM5094" },
{ "TCM5095" },
+ { "TCM5098" },
{ "" }
};
MODULE_DEVICE_TABLE(eisa, el3_eisa_ids);
*/
static struct pci_device_id atl1e_pci_tbl[] = {
{PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, PCI_DEVICE_ID_ATTANSIC_L1E)},
+ {PCI_DEVICE(PCI_VENDOR_ID_ATTANSIC, 0x1066)},
/* required last entry */
{ 0 }
};
#include "atl1.h"
+#define ATLX_DRIVER_VERSION "2.1.3"
+MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, \
+ Chris Snook <csnook@redhat.com>, Jay Cliburn <jcliburn@gmail.com>");
+MODULE_LICENSE("GPL");
+MODULE_VERSION(ATLX_DRIVER_VERSION);
+
/* Temporary hack for merging atl1 and atl2 */
#include "atlx.c"
#include <linux/module.h>
#include <linux/types.h>
-#define ATLX_DRIVER_VERSION "2.1.3"
-MODULE_AUTHOR("Xiong Huang <xiong.huang@atheros.com>, \
- Chris Snook <csnook@redhat.com>, Jay Cliburn <jcliburn@gmail.com>");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(ATLX_DRIVER_VERSION);
-
#define ATLX_ERR_PHY 2
#define ATLX_ERR_PHY_SPEED 7
#define ATLX_ERR_PHY_RES 8
return 0;
}
-static const struct net_device_ops bfin_mac_netdev_ops = {
- .ndo_open = bfin_mac_open,
- .ndo_stop = bfin_mac_close,
- .ndo_start_xmit = bfin_mac_hard_start_xmit,
- .ndo_set_mac_address = bfin_mac_set_mac_address,
- .ndo_tx_timeout = bfin_mac_timeout,
- .ndo_set_multicast_list = bfin_mac_set_multicast_list,
- .ndo_validate_addr = eth_validate_addr,
- .ndo_change_mtu = eth_change_mtu,
-#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = bfin_mac_poll,
-#endif
-};
-
/*
- *
* this makes the board clean up everything that it can
* and not talk to the outside world. Caused by
* an 'ifconfig ethX down'
return 0;
}
+static const struct net_device_ops bfin_mac_netdev_ops = {
+ .ndo_open = bfin_mac_open,
+ .ndo_stop = bfin_mac_close,
+ .ndo_start_xmit = bfin_mac_hard_start_xmit,
+ .ndo_set_mac_address = bfin_mac_set_mac_address,
+ .ndo_tx_timeout = bfin_mac_timeout,
+ .ndo_set_multicast_list = bfin_mac_set_multicast_list,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_change_mtu = eth_change_mtu,
+#ifdef CONFIG_NET_POLL_CONTROLLER
+ .ndo_poll_controller = bfin_mac_poll,
+#endif
+};
+
static int __devinit bfin_mac_probe(struct platform_device *pdev)
{
struct net_device *ndev;
struct page *page;
void *va;
unsigned int offset;
- u64 *p_cnt;
- DECLARE_PCI_UNMAP_ADDR(mapping);
+ unsigned long *p_cnt;
+ dma_addr_t mapping;
};
struct rx_desc;
for_each_port(adapter, i) {
struct net_device *dev = adapter->port[i];
struct port_info *p = netdev_priv(dev);
+ int link_fault;
spin_lock_irq(&adapter->work_lock);
- if (p->link_fault) {
+ link_fault = p->link_fault;
+ spin_unlock_irq(&adapter->work_lock);
+
+ if (link_fault) {
t3_link_fault(adapter, i);
- spin_unlock_irq(&adapter->work_lock);
continue;
}
- spin_unlock_irq(&adapter->work_lock);
if (!(p->phy.caps & SUPPORTED_IRQ) && netif_running(dev)) {
t3_xgm_intr_disable(adapter, i);
(*d->pg_chunk.p_cnt)--;
if (!*d->pg_chunk.p_cnt)
pci_unmap_page(pdev,
- pci_unmap_addr(&d->pg_chunk, mapping),
+ d->pg_chunk.mapping,
q->alloc_size, PCI_DMA_FROMDEVICE);
put_page(d->pg_chunk.page);
q->pg_chunk.offset = 0;
mapping = pci_map_page(adapter->pdev, q->pg_chunk.page,
0, q->alloc_size, PCI_DMA_FROMDEVICE);
- pci_unmap_addr_set(&q->pg_chunk, mapping, mapping);
+ q->pg_chunk.mapping = mapping;
}
sd->pg_chunk = q->pg_chunk;
nomem: q->alloc_failed++;
break;
}
- mapping = pci_unmap_addr(&sd->pg_chunk, mapping) +
- sd->pg_chunk.offset;
+ mapping = sd->pg_chunk.mapping + sd->pg_chunk.offset;
pci_unmap_addr_set(sd, dma_addr, mapping);
add_one_rx_chunk(mapping, d, q->gen);
(*sd->pg_chunk.p_cnt)--;
if (!*sd->pg_chunk.p_cnt)
pci_unmap_page(adap->pdev,
- pci_unmap_addr(&sd->pg_chunk, mapping),
+ sd->pg_chunk.mapping,
fl->alloc_size,
PCI_DMA_FROMDEVICE);
if (!skb) {
(*sd->pg_chunk.p_cnt)--;
if (!*sd->pg_chunk.p_cnt)
pci_unmap_page(adap->pdev,
- pci_unmap_addr(&sd->pg_chunk, mapping),
+ sd->pg_chunk.mapping,
fl->alloc_size,
PCI_DMA_FROMDEVICE);
A_XGM_INT_STATUS + mac->offset);
link_fault &= F_LINKFAULTCHANGE;
+ link_ok = lc->link_ok;
+ speed = lc->speed;
+ duplex = lc->duplex;
+ fc = lc->fc;
+
phy->ops->get_link_status(phy, &link_ok, &speed, &duplex, &fc);
if (link_fault) {
PCI_DMA_FROMDEVICE);
length = le16_to_cpu(rx_desc->length);
-
- if (unlikely(!(status & E1000_RXD_STAT_EOP))) {
+ /* !EOP means multiple descriptors were used to store a single
+ * packet, also make sure the frame isn't just CRC only */
+ if (unlikely(!(status & E1000_RXD_STAT_EOP) || (length <= 4))) {
/* All receives must fit into a single buffer */
E1000_DBG("%s: Receive packet consumed multiple"
" buffers\n", netdev->name);
};
static int phy_cross = NV_CROSSOVER_DETECTION_DISABLED;
+/*
+ * Power down phy when interface is down (persists through reboot;
+ * older Linux and other OSes may not power it up again)
+ */
+static int phy_power_down = 0;
+
static inline struct fe_priv *get_nvpriv(struct net_device *dev)
{
return netdev_priv(dev);
/* restart auto negotiation, power down phy */
mii_control = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
- mii_control |= (BMCR_ANRESTART | BMCR_ANENABLE | BMCR_PDOWN);
+ mii_control |= (BMCR_ANRESTART | BMCR_ANENABLE);
+ if (phy_power_down) {
+ mii_control |= BMCR_PDOWN;
+ }
if (mii_rw(dev, np->phyaddr, MII_BMCR, mii_control)) {
return PHY_ERROR;
}
nv_drain_rxtx(dev);
- if (np->wolenabled) {
+ if (np->wolenabled || !phy_power_down) {
writel(NVREG_PFF_ALWAYS|NVREG_PFF_MYADDR, base + NvRegPacketFilterFlags);
nv_start_rx(dev);
} else {
MODULE_PARM_DESC(dma_64bit, "High DMA is enabled by setting to 1 and disabled by setting to 0.");
module_param(phy_cross, int, 0);
MODULE_PARM_DESC(phy_cross, "Phy crossover detection for Realtek 8201 phy is enabled by setting to 1 and disabled by setting to 0.");
+module_param(phy_power_down, int, 0);
+MODULE_PARM_DESC(phy_power_down, "Power down phy and disable link when interface is down (1), or leave phy powered up (0).");
MODULE_AUTHOR("Manfred Spraul <manfred@colorfullife.com>");
MODULE_DESCRIPTION("Reverse Engineered nForce ethernet driver");
(IEVENT_RXC | IEVENT_BSY | IEVENT_EBERR | IEVENT_MSRO | \
IEVENT_BABT | IEVENT_TXC | IEVENT_TXE | IEVENT_LC \
| IEVENT_CRL | IEVENT_XFUN | IEVENT_DPE | IEVENT_PERR \
- | IEVENT_MAG)
+ | IEVENT_MAG | IEVENT_BABR)
#define IMASK_INIT_CLEAR 0x00000000
#define IMASK_BABR 0x80000000
.ndo_set_mac_address = eth_mac_addr,
.ndo_change_mtu = eth_change_mtu,
#ifdef CONFIG_NET_POLL_CONTROLLER
- .ndo_poll_controller = ei_poll,
+ .ndo_poll_controller = __ei_poll,
#endif
};
INC_PERF_COUNTER(priv->pstats.tx_poll);
- if (!spin_trylock(&ring->comp_lock)) {
+ if (!spin_trylock_irq(&ring->comp_lock)) {
mod_timer(&cq->timer, jiffies + MLX4_EN_TX_POLL_TIMEOUT);
return;
}
if (inflight && priv->port_up)
mod_timer(&cq->timer, jiffies + MLX4_EN_TX_POLL_TIMEOUT);
- spin_unlock(&ring->comp_lock);
+ spin_unlock_irq(&ring->comp_lock);
}
static struct mlx4_en_tx_desc *mlx4_en_bounce_to_desc(struct mlx4_en_priv *priv,
/* Poll the CQ every mlx4_en_TX_MODER_POLL packets */
if ((++ring->poll_cnt & (MLX4_EN_TX_POLL_MODER - 1)) == 0)
- if (spin_trylock(&ring->comp_lock)) {
+ if (spin_trylock_irq(&ring->comp_lock)) {
mlx4_en_process_tx_cq(priv->dev, cq);
- spin_unlock(&ring->comp_lock);
+ spin_unlock_irq(&ring->comp_lock);
}
}
#define RX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
#define TX_DMA_BURST 6 /* Maximum PCI burst, '6' is 1024 */
#define EarlyTxThld 0x3F /* 0x3F means NO early transmit */
-#define RxPacketMaxSize 0x3FE8 /* 16K - 1 - ETH_HLEN - VLAN - CRC... */
#define SafeMtu 0x1c20 /* ... actually life sucks beyond ~7k */
#define InterFrameGap 0x03 /* 3 means InterFrameGap = the shortest one */
return cmd;
}
-static void rtl_set_rx_max_size(void __iomem *ioaddr)
+static void rtl_set_rx_max_size(void __iomem *ioaddr, unsigned int rx_buf_sz)
{
/* Low hurts. Let's disable the filtering. */
- RTL_W16(RxMaxSize, 16383);
+ RTL_W16(RxMaxSize, rx_buf_sz);
}
static void rtl8169_set_magic_reg(void __iomem *ioaddr, unsigned mac_version)
RTL_W8(EarlyTxThres, EarlyTxThld);
- rtl_set_rx_max_size(ioaddr);
+ rtl_set_rx_max_size(ioaddr, tp->rx_buf_sz);
if ((tp->mac_version == RTL_GIGA_MAC_VER_01) ||
(tp->mac_version == RTL_GIGA_MAC_VER_02) ||
RTL_W8(EarlyTxThres, EarlyTxThld);
- rtl_set_rx_max_size(ioaddr);
+ rtl_set_rx_max_size(ioaddr, tp->rx_buf_sz);
tp->cp_cmd |= RTL_R16(CPlusCmd) | PktCntrDisable | INTT_1;
RTL_W8(EarlyTxThres, EarlyTxThld);
- rtl_set_rx_max_size(ioaddr);
+ rtl_set_rx_max_size(ioaddr, tp->rx_buf_sz);
tp->cp_cmd |= rtl_rw_cpluscmd(ioaddr) | PCIMulRW;
ASUS P5B Deluxe
Toshiba Satellite Pro series of laptops
Asus Wireless Link
+ Linksys WUSB54GC-EU
Thanks to Realtek for their support!
if (ret != CMD_STATUS_COMPLETE) {
queue_delayed_work(priv->hw->workqueue, &priv->dwork_hw_scan,
SCAN_POLL_INTERVAL);
- goto exit;
+ mutex_unlock(&priv->mtx);
+ return;
}
- ieee80211_scan_completed(priv->hw, false);
-
if (is_valid_ether_addr(priv->bssid))
at76_join(priv);
- ieee80211_wake_queues(priv->hw);
-
-exit:
mutex_unlock(&priv->mtx);
+
+ ieee80211_scan_completed(priv->hw, false);
+
+ ieee80211_wake_queues(priv->hw);
}
static int at76_hw_scan(struct ieee80211_hw *hw,
{USB_DEVICE(0x18E8, 0x6232), .driver_info = DEVICE_RTL8187},
/* AirLive */
{USB_DEVICE(0x1b75, 0x8187), .driver_info = DEVICE_RTL8187},
+ /* Linksys */
+ {USB_DEVICE(0x1737, 0x0073), .driver_info = DEVICE_RTL8187B},
{}
};
}
#ifdef CONFIG_SMP
-static void iosapic_set_affinity_irq(unsigned int irq,
+static int iosapic_set_affinity_irq(unsigned int irq,
const struct cpumask *dest)
{
struct vector_info *vi = iosapic_get_vector(irq);
dest_cpu = cpu_check_affinity(irq, dest);
if (dest_cpu < 0)
- return;
+ return -1;
cpumask_copy(irq_desc[irq].affinity, cpumask_of(dest_cpu));
vi->txn_addr = txn_affinity_addr(irq, dest_cpu);
iosapic_set_irt_data(vi, &dummy_d0, &d1);
iosapic_wr_irt_entry(vi, d0, d1);
spin_unlock_irqrestore(&iosapic_lock, flags);
+
+ return 0;
}
#endif
unsigned long port;
if (!dev->irq) {
- printk(KERN_WARNING "IRQ not found for parallel device at 0x%lx\n",
- dev->hpa.start);
+ printk(KERN_WARNING "IRQ not found for parallel device at 0x%llx\n",
+ (unsigned long long)dev->hpa.start);
return -ENODEV;
}
* pardevice fields. -arca
*/
port->ops->init_state(tmp, tmp->state);
- parport_device_proc_register(tmp);
+ if (!test_and_set_bit(PARPORT_DEVPROC_REGISTERED, &port->devflags)) {
+ port->proc_device = tmp;
+ parport_device_proc_register(tmp);
+ }
return tmp;
out_free_all:
}
#endif
- parport_device_proc_unregister(dev);
-
port = dev->port->physport;
+ if (port->proc_device == dev) {
+ port->proc_device = NULL;
+ clear_bit(PARPORT_DEVPROC_REGISTERED, &port->devflags);
+ parport_device_proc_unregister(dev);
+ }
+
if (port->cad == dev) {
printk(KERN_DEBUG "%s: %s forgot to release port\n",
port->name, dev->name);
struct acpiphp_bridge *bridge; /* Ejectable PCI-to-PCI bridge */
struct list_head sibling;
- struct pci_dev *pci_dev;
struct notifier_block nb;
acpi_handle handle;
/*
* Lifetime rules for pci_dev:
- * - The one in acpiphp_func has its refcount elevated by pci_get_slot()
- * when the driver is loaded or when an insertion event occurs. It loses
- * a refcount when its ejected or the driver unloads.
* - The one in acpiphp_bridge has its refcount elevated by pci_get_slot()
* when the bridge is scanned and it loses a refcount when the bridge
* is removed.
unsigned long long adr, sun;
int device, function, retval;
struct pci_bus *pbus = bridge->pci_bus;
+ struct pci_dev *pdev;
if (!acpi_pci_check_ejectable(pbus, handle) && !is_dock_device(handle))
return AE_OK;
newfunc->slot = slot;
list_add_tail(&newfunc->sibling, &slot->funcs);
- /* associate corresponding pci_dev */
- newfunc->pci_dev = pci_get_slot(pbus, PCI_DEVFN(device, function));
- if (newfunc->pci_dev) {
+ pdev = pci_get_slot(pbus, PCI_DEVFN(device, function));
+ if (pdev) {
slot->flags |= (SLOT_ENABLED | SLOT_POWEREDON);
+ pci_dev_put(pdev);
}
if (is_dock_device(handle)) {
if (ACPI_FAILURE(status))
err("failed to remove notify handler\n");
}
- pci_dev_put(func->pci_dev);
list_del(list);
kfree(func);
}
pci_enable_bridges(bus);
pci_bus_add_devices(bus);
- /* associate pci_dev to our representation */
list_for_each (l, &slot->funcs) {
func = list_entry(l, struct acpiphp_func, sibling);
- func->pci_dev = pci_get_slot(bus, PCI_DEVFN(slot->device,
- func->function));
- if (!func->pci_dev)
+ dev = pci_get_slot(bus, PCI_DEVFN(slot->device,
+ func->function));
+ if (!dev)
continue;
- if (func->pci_dev->hdr_type != PCI_HEADER_TYPE_BRIDGE &&
- func->pci_dev->hdr_type != PCI_HEADER_TYPE_CARDBUS)
+ if (dev->hdr_type != PCI_HEADER_TYPE_BRIDGE &&
+ dev->hdr_type != PCI_HEADER_TYPE_CARDBUS) {
+ pci_dev_put(dev);
continue;
+ }
status = find_p2p_bridge(func->handle, (u32)1, bus, NULL);
if (ACPI_FAILURE(status))
warn("find_p2p_bridge failed (error code = 0x%x)\n",
status);
+ pci_dev_put(dev);
}
slot->flags |= SLOT_ENABLED;
*/
static int disable_device(struct acpiphp_slot *slot)
{
- int retval = 0;
struct acpiphp_func *func;
- struct list_head *l;
+ struct pci_dev *pdev;
/* is this slot already disabled? */
if (!(slot->flags & SLOT_ENABLED))
goto err_exit;
- list_for_each (l, &slot->funcs) {
- func = list_entry(l, struct acpiphp_func, sibling);
-
+ list_for_each_entry(func, &slot->funcs, sibling) {
if (func->bridge) {
/* cleanup p2p bridges under this P2P bridge */
cleanup_p2p_bridge(func->bridge->handle,
func->bridge = NULL;
}
- if (func->pci_dev) {
- pci_stop_bus_device(func->pci_dev);
- if (func->pci_dev->subordinate) {
- disable_bridges(func->pci_dev->subordinate);
- pci_disable_device(func->pci_dev);
+ pdev = pci_get_slot(slot->bridge->pci_bus,
+ PCI_DEVFN(slot->device, func->function));
+ if (pdev) {
+ pci_stop_bus_device(pdev);
+ if (pdev->subordinate) {
+ disable_bridges(pdev->subordinate);
+ pci_disable_device(pdev);
}
+ pci_remove_bus_device(pdev);
+ pci_dev_put(pdev);
}
}
- list_for_each (l, &slot->funcs) {
- func = list_entry(l, struct acpiphp_func, sibling);
-
+ list_for_each_entry(func, &slot->funcs, sibling) {
acpiphp_unconfigure_ioapics(func->handle);
acpiphp_bus_trim(func->handle);
- /* try to remove anyway.
- * acpiphp_bus_add might have been failed */
-
- if (!func->pci_dev)
- continue;
-
- pci_remove_bus_device(func->pci_dev);
- pci_dev_put(func->pci_dev);
- func->pci_dev = NULL;
}
slot->flags &= (~SLOT_ENABLED);
- err_exit:
- return retval;
+err_exit:
+ return 0;
}
return -1;
}
for (loop = 0; loop < len; loop++) {
- if ((*cur_slot)->number == rtable->slots[loop].slot) {
- if ((*cur_slot)->bus == rtable->slots[loop].bus) {
+ if ((*cur_slot)->number == rtable->slots[loop].slot &&
+ (*cur_slot)->bus == rtable->slots[loop].bus) {
+ struct io_apic_irq_attr irq_attr;
+
(*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn);
for (i = 0; i < 4; i++)
(*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus,
- (int) (*cur_slot)->device, i);
-
- debug("(*cur_slot)->irq[0] = %x\n",
- (*cur_slot)->irq[0]);
- debug("(*cur_slot)->irq[1] = %x\n",
- (*cur_slot)->irq[1]);
- debug("(*cur_slot)->irq[2] = %x\n",
- (*cur_slot)->irq[2]);
- debug("(*cur_slot)->irq[3] = %x\n",
- (*cur_slot)->irq[3]);
-
- debug("rtable->exlusive_irqs = %x\n",
+ (int) (*cur_slot)->device, i,
+ &irq_attr);
+
+ debug("(*cur_slot)->irq[0] = %x\n",
+ (*cur_slot)->irq[0]);
+ debug("(*cur_slot)->irq[1] = %x\n",
+ (*cur_slot)->irq[1]);
+ debug("(*cur_slot)->irq[2] = %x\n",
+ (*cur_slot)->irq[2]);
+ debug("(*cur_slot)->irq[3] = %x\n",
+ (*cur_slot)->irq[3]);
+
+ debug("rtable->exlusive_irqs = %x\n",
rtable->exclusive_irqs);
- debug("rtable->slots[loop].irq[0].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[0].bitmap = %x\n",
rtable->slots[loop].irq[0].bitmap);
- debug("rtable->slots[loop].irq[1].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[1].bitmap = %x\n",
rtable->slots[loop].irq[1].bitmap);
- debug("rtable->slots[loop].irq[2].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[2].bitmap = %x\n",
rtable->slots[loop].irq[2].bitmap);
- debug("rtable->slots[loop].irq[3].bitmap = %x\n",
+ debug("rtable->slots[loop].irq[3].bitmap = %x\n",
rtable->slots[loop].irq[3].bitmap);
- debug("rtable->slots[loop].irq[0].link = %x\n",
+ debug("rtable->slots[loop].irq[0].link = %x\n",
rtable->slots[loop].irq[0].link);
- debug("rtable->slots[loop].irq[1].link = %x\n",
+ debug("rtable->slots[loop].irq[1].link = %x\n",
rtable->slots[loop].irq[1].link);
- debug("rtable->slots[loop].irq[2].link = %x\n",
+ debug("rtable->slots[loop].irq[2].link = %x\n",
rtable->slots[loop].irq[2].link);
- debug("rtable->slots[loop].irq[3].link = %x\n",
+ debug("rtable->slots[loop].irq[3].link = %x\n",
rtable->slots[loop].irq[3].link);
- debug("end of init_devno\n");
- kfree(rtable);
- return 0;
- }
+ debug("end of init_devno\n");
+ kfree(rtable);
+ return 0;
}
}
int max_irq;
int pos;
int irq;
+ int node;
pos = pci_find_ht_capability(dev, HT_CAPTYPE_IRQ);
if (!pos)
cfg->msg.address_lo = 0xffffffff;
cfg->msg.address_hi = 0xffffffff;
- irq = create_irq();
+ node = dev_to_node(&dev->dev);
+ irq = create_irq_nr(0, node);
if (irq <= 0) {
kfree(cfg);
}
}
-#ifdef CONFIG_INTR_REMAP
- if (!intr_remapping_enabled) {
- ret = enable_intr_remapping(0);
- if (ret)
- printk(KERN_ERR
- "IOMMU: enable interrupt remapping failed\n");
- }
-#endif
-
/*
* For each rmrr
* for each dev attached to rmrr
static int ir_ioapic_num;
int intr_remapping_enabled;
+static int disable_intremap;
+static __init int setup_nointremap(char *str)
+{
+ disable_intremap = 1;
+ return 0;
+}
+early_param("nointremap", setup_nointremap);
+
struct irq_2_iommu {
struct intel_iommu *iommu;
u16 irte_index;
};
#ifdef CONFIG_GENERIC_HARDIRQS
-static struct irq_2_iommu *get_one_free_irq_2_iommu(int cpu)
+static struct irq_2_iommu *get_one_free_irq_2_iommu(int node)
{
struct irq_2_iommu *iommu;
- int node;
-
- node = cpu_to_node(cpu);
iommu = kzalloc_node(sizeof(*iommu), GFP_ATOMIC, node);
- printk(KERN_DEBUG "alloc irq_2_iommu on cpu %d node %d\n", cpu, node);
+ printk(KERN_DEBUG "alloc irq_2_iommu on node %d\n", node);
return iommu;
}
return desc->irq_2_iommu;
}
-static struct irq_2_iommu *irq_2_iommu_alloc_cpu(unsigned int irq, int cpu)
+static struct irq_2_iommu *irq_2_iommu_alloc_node(unsigned int irq, int node)
{
struct irq_desc *desc;
struct irq_2_iommu *irq_iommu;
/*
* alloc irq desc if not allocated already.
*/
- desc = irq_to_desc_alloc_cpu(irq, cpu);
+ desc = irq_to_desc_alloc_node(irq, node);
if (!desc) {
printk(KERN_INFO "can not get irq_desc for %d\n", irq);
return NULL;
irq_iommu = desc->irq_2_iommu;
if (!irq_iommu)
- desc->irq_2_iommu = get_one_free_irq_2_iommu(cpu);
+ desc->irq_2_iommu = get_one_free_irq_2_iommu(node);
return desc->irq_2_iommu;
}
static struct irq_2_iommu *irq_2_iommu_alloc(unsigned int irq)
{
- return irq_2_iommu_alloc_cpu(irq, boot_cpu_id);
+ return irq_2_iommu_alloc_node(irq, cpu_to_node(boot_cpu_id));
}
#else /* !CONFIG_SPARSE_IRQ */
readl, (sts & DMA_GSTS_IRTPS), sts);
spin_unlock_irqrestore(&iommu->register_lock, flags);
- if (mode == 0) {
- spin_lock_irqsave(&iommu->register_lock, flags);
-
- /* enable comaptiblity format interrupt pass through */
- cmd = iommu->gcmd | DMA_GCMD_CFI;
- iommu->gcmd |= DMA_GCMD_CFI;
- writel(cmd, iommu->reg + DMAR_GCMD_REG);
-
- IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG,
- readl, (sts & DMA_GSTS_CFIS), sts);
-
- spin_unlock_irqrestore(&iommu->register_lock, flags);
- }
-
/*
* global invalidation of interrupt entry cache before enabling
* interrupt-remapping.
spin_unlock_irqrestore(&iommu->register_lock, flags);
}
+int __init intr_remapping_supported(void)
+{
+ struct dmar_drhd_unit *drhd;
+
+ if (disable_intremap)
+ return 0;
+
+ for_each_drhd_unit(drhd) {
+ struct intel_iommu *iommu = drhd->iommu;
+
+ if (!ecap_ir_support(iommu->ecap))
+ return 0;
+ }
+
+ return 1;
+}
+
int __init enable_intr_remapping(int eim)
{
struct dmar_drhd_unit *drhd;
/* Early fixups, before probing the BARs */
pci_fixup_device(pci_fixup_early, dev);
+ /* device class may be changed after fixup */
+ class = dev->class >> 8;
switch (dev->hdr_type) { /* header type */
case PCI_HEADER_TYPE_NORMAL: /* standard header */
}
flags = irq_flags(triggering, polarity, shareable);
- irq = acpi_register_gsi(gsi, triggering, polarity);
+ irq = acpi_register_gsi(&dev->dev, gsi, triggering, polarity);
if (irq >= 0)
pcibios_penalize_isa_irq(irq, 1);
else
unsigned char mcr;
unsigned char mcr_mask; /* mask of user bits */
unsigned char mcr_force; /* mask of forced bits */
+ unsigned char cur_iotype; /* Running I/O type */
/*
* Some bits in registers are cleared on a read, so they must
static void set_io_from_upio(struct uart_port *p)
{
+ struct uart_8250_port *up = (struct uart_8250_port *)p;
switch (p->iotype) {
case UPIO_HUB6:
p->serial_in = hub6_serial_in;
p->serial_out = io_serial_out;
break;
}
+ /* Remember loaded iotype */
+ up->cur_iotype = p->iotype;
}
static void
up->capabilities = uart_config[up->port.type].flags;
up->mcr = 0;
+ if (up->port.iotype != up->cur_iotype)
+ set_io_from_upio(port);
+
if (up->port.type == PORT_16C950) {
/* Wake up and initialize UART */
up->acr = 0;
if (ret < 0)
probeflags &= ~PROBE_RSA;
+ if (up->port.iotype != up->cur_iotype)
+ set_io_from_upio(port);
+
if (flags & UART_CONFIG_TYPE)
autoconfig(up, probeflags);
if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ)
{
int i;
+ for (i = 0; i < nr_uarts; i++) {
+ struct uart_8250_port *up = &serial8250_ports[i];
+ up->cur_iotype = 0xFF;
+ }
+
serial8250_isa_init_ports();
for (i = 0; i < nr_uarts; i++) {
*/
if (parisc_parent(dev)->id.hw_type != HPHW_IOA)
printk(KERN_INFO
- "Serial: device 0x%lx not configured.\n"
+ "Serial: device 0x%llx not configured.\n"
"Enable support for Wax, Lasi, Asp or Dino.\n",
- dev->hpa.start);
+ (unsigned long long)dev->hpa.start);
return -ENODEV;
}
if (co->index == -1 || co->index >= ARRAY_SIZE(imx_ports))
co->index = 0;
sport = imx_ports[co->index];
+ if(sport == NULL)
+ return -ENODEV;
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
pr_debug("mpc52xx_console_setup co=%p, co->index=%i, options=%s\n",
co, co->index, options);
- if ((co->index < 0) || (co->index > MPC52xx_PSC_MAXNUM)) {
+ if ((co->index < 0) || (co->index >= MPC52xx_PSC_MAXNUM)) {
pr_debug("PSC%x out of range\n", co->index);
return -EINVAL;
}
}
return -ENODEV;
}
+EXPORT_SYMBOL(ssb_watchdog_timer_set);
u32 ssb_gpio_in(struct ssb_bus *bus, u32 mask)
{
obj-$(CONFIG_PCI) += host/
obj-$(CONFIG_USB_EHCI_HCD) += host/
obj-$(CONFIG_USB_ISP116X_HCD) += host/
-obj-$(CONFIG_USB_ISP1760_HCD) += host/
obj-$(CONFIG_USB_OHCI_HCD) += host/
obj-$(CONFIG_USB_UHCI_HCD) += host/
obj-$(CONFIG_USB_FHCI_HCD) += host/
{ USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */
.driver_info = NO_UNION_NORMAL, /* has no union descriptor */
},
+ { USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */
+ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */
+ },
{ USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */
},
{ USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */
if (ep->desc) {
list_add_tail(&req->queue, &ep->queue);
- if (ep->is_in || (ep_is_control(ep)
+ if ((!ep_is_control(ep) && ep->is_in) ||
+ (ep_is_control(ep)
&& (ep->state == DATA_STAGE_IN
|| ep->state == STATUS_STAGE_IN)))
usba_ep_writel(ep, CTL_ENB, USBA_TX_PK_RDY);
usba_writel(udc, CTRL, USBA_DISABLE_MASK);
clk_disable(pclk);
- usba_ep = kmalloc(sizeof(struct usba_ep) * pdata->num_ep,
+ usba_ep = kzalloc(sizeof(struct usba_ep) * pdata->num_ep,
GFP_KERNEL);
if (!usba_ep)
goto err_alloc_ep;
u32 reg_base, or_reg, skip_reg;
unsigned long flags;
struct ptd ptd;
+ packet_enqueue *pe;
switch (usb_pipetype(urb->pipe)) {
case PIPE_ISOCHRONOUS:
reg_base = INT_REGS_OFFSET;
or_reg = HC_INT_IRQ_MASK_OR_REG;
skip_reg = HC_INT_PTD_SKIPMAP_REG;
+ pe = enqueue_an_INT_packet;
break;
default:
reg_base = ATL_REGS_OFFSET;
or_reg = HC_ATL_IRQ_MASK_OR_REG;
skip_reg = HC_ATL_PTD_SKIPMAP_REG;
+ pe = enqueue_an_ATL_packet;
break;
}
u32 skip_map;
u32 or_map;
struct isp1760_qtd *qtd;
+ struct isp1760_qh *qh = ints->qh;
skip_map = isp1760_readl(hcd->regs + skip_reg);
skip_map |= 1 << i;
priv_write_copy(priv, (u32 *)&ptd, hcd->regs + reg_base
+ i * sizeof(ptd), sizeof(ptd));
qtd = ints->qtd;
-
- clean_up_qtdlist(qtd);
+ qtd = clean_up_qtdlist(qtd);
free_mem(priv, ints->payload);
ints->payload = 0;
isp1760_urb_done(priv, urb, status);
+ if (qtd)
+ pe(hcd, qh, qtd);
break;
+
+ } else if (ints->qtd) {
+ struct isp1760_qtd *qtd, *prev_qtd = ints->qtd;
+
+ for (qtd = ints->qtd->hw_next; qtd; qtd = qtd->hw_next) {
+ if (qtd->urb == urb) {
+ prev_qtd->hw_next = clean_up_qtdlist(qtd);
+ isp1760_urb_done(priv, urb, status);
+ break;
+ }
+ prev_qtd = qtd;
+ }
+ /* we found the urb before the end of the list */
+ if (qtd)
+ break;
}
ints++;
}
if (retval > 0) {
/* quietly accept this device, but don't bind to a
serial port as it's about to disappear */
+ serial->num_ports = 0;
goto exit;
}
}
/* configurable parameters */
#define ATMEL_LCDC_CVAL_DEFAULT 0xc8
-#define ATMEL_LCDC_DMA_BURST_LEN 8
-
-#if defined(CONFIG_ARCH_AT91SAM9263) || defined(CONFIG_ARCH_AT91CAP9) || \
- defined(CONFIG_ARCH_AT91SAM9RL)
-#define ATMEL_LCDC_FIFO_SIZE 2048
-#else
-#define ATMEL_LCDC_FIFO_SIZE 512
-#endif
+#define ATMEL_LCDC_DMA_BURST_LEN 8 /* words */
+#define ATMEL_LCDC_FIFO_SIZE 512 /* words */
#if defined(CONFIG_ARCH_AT91)
#define ATMEL_LCDFB_FBINFO_DEFAULT (FBINFO_DEFAULT \
int win;
for (win = 0; win <= S3C_FB_MAX_WIN; win++)
- s3c_fb_release_win(sfb, sfb->windows[win]);
+ if (sfb->windows[win])
+ s3c_fb_release_win(sfb, sfb->windows[win]);
iounmap(sfb->regs);
static int s3c_fb_resume(struct platform_device *pdev)
{
struct s3c_fb *sfb = platform_get_drvdata(pdev);
+ struct s3c_fb_platdata *pd = sfb->pdata;
struct s3c_fb_win *win;
int win_no;
clk_enable(sfb->bus_clk);
+ /* setup registers */
+ writel(pd->vidcon1, sfb->regs + VIDCON1);
+
+ /* zero all windows before we do anything */
+ for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++)
+ s3c_fb_clear_win(sfb, win_no);
+
+ /* restore framebuffers */
for (win_no = 0; win_no < S3C_FB_MAX_WIN; win_no++) {
win = sfb->windows[win_no];
if (!win)
if (irq == nr_irqs)
panic("No available IRQ to bind to: increase nr_irqs!\n");
- desc = irq_to_desc_alloc_cpu(irq, 0);
+ desc = irq_to_desc_alloc_node(irq, 0);
if (WARN_ON(desc == NULL))
return -1;
}
/* Rebind an evtchn so that it gets delivered to a specific cpu */
-static void rebind_irq_to_cpu(unsigned irq, unsigned tcpu)
+static int rebind_irq_to_cpu(unsigned irq, unsigned tcpu)
{
struct evtchn_bind_vcpu bind_vcpu;
int evtchn = evtchn_from_irq(irq);
if (!VALID_EVTCHN(evtchn))
- return;
+ return -1;
/* Send future instances of this interrupt to other vcpu. */
bind_vcpu.port = evtchn;
*/
if (HYPERVISOR_event_channel_op(EVTCHNOP_bind_vcpu, &bind_vcpu) >= 0)
bind_evtchn_to_cpu(evtchn, tcpu);
-}
+ return 0;
+}
-static void set_affinity_irq(unsigned irq, const struct cpumask *dest)
+static int set_affinity_irq(unsigned irq, const struct cpumask *dest)
{
unsigned tcpu = cpumask_first(dest);
- rebind_irq_to_cpu(irq, tcpu);
+
+ return rebind_irq_to_cpu(irq, tcpu);
}
int resend_irq_on_evtchn(unsigned int irq)
*/
if (notify == NFY_MOUNT) {
/*
- * If the dentry isn't hashed just go ahead and try the
- * mount again with a new wait (not much else we can do).
- */
- if (!d_unhashed(dentry)) {
- /*
- * But if the dentry is hashed, that means that we
- * got here through the revalidate path. Thus, we
- * need to check if the dentry has been mounted
- * while we waited on the wq_mutex. If it has,
- * simply return success.
- */
- if (d_mountpoint(dentry))
- return 0;
- }
+ * If the dentry was successfully mounted while we slept
+ * on the wait queue mutex we can return success. If it
+ * isn't mounted (doesn't have submounts for the case of
+ * a multi-mount with no mount at it's base) we can
+ * continue on and create a new request.
+ */
+ if (have_submounts(dentry))
+ return 0;
}
return 1;
#include <asm/uaccess.h>
#include <asm/unaligned.h>
#include <asm/cacheflush.h>
+#include <asm/page.h>
/****************************************************************************/
#define DBG_FLT(a...)
#endif
+/*
+ * User data (stack, data section and bss) needs to be aligned
+ * for the same reasons as SLAB memory is, and to the same amount.
+ * Avoid duplicating architecture specific code by using the same
+ * macro as with SLAB allocation:
+ */
+#ifdef ARCH_SLAB_MINALIGN
+#define FLAT_DATA_ALIGN (ARCH_SLAB_MINALIGN)
+#else
+#define FLAT_DATA_ALIGN (sizeof(void *))
+#endif
+
#define RELOC_FAILED 0xff00ff01 /* Relocation incorrect somewhere */
#define UNLOADED_LIB 0x7ff000ff /* Placeholder for unused library */
int envc = bprm->envc;
char uninitialized_var(dummy);
- sp = (unsigned long *) ((-(unsigned long)sizeof(char *))&(unsigned long) p);
+ sp = (unsigned long *)p;
+ sp -= (envc + argc + 2) + 1 + (flat_argvp_envp_on_stack() ? 2 : 0);
+ sp = (unsigned long *) ((unsigned long)sp & -FLAT_DATA_ALIGN);
+ argv = sp + 1 + (flat_argvp_envp_on_stack() ? 2 : 0);
+ envp = argv + (argc + 1);
- sp -= envc+1;
- envp = sp;
- sp -= argc+1;
- argv = sp;
-
- flat_stack_align(sp);
if (flat_argvp_envp_on_stack()) {
- --sp; put_user((unsigned long) envp, sp);
- --sp; put_user((unsigned long) argv, sp);
+ put_user((unsigned long) envp, sp + 2);
+ put_user((unsigned long) argv, sp + 1);
}
- put_user(argc,--sp);
+ put_user(argc, sp);
current->mm->arg_start = (unsigned long) p;
while (argc-->0) {
put_user((unsigned long) p, argv++);
ret = realdatastart;
goto err;
}
- datapos = realdatastart + MAX_SHARED_LIBS * sizeof(unsigned long);
+ datapos = ALIGN(realdatastart +
+ MAX_SHARED_LIBS * sizeof(unsigned long),
+ FLAT_DATA_ALIGN);
DBG_FLT("BINFMT_FLAT: Allocated data+bss+stack (%d bytes): %x\n",
(int)(data_len + bss_len + stack_len), (int)datapos);
}
realdatastart = textpos + ntohl(hdr->data_start);
- datapos = realdatastart + MAX_SHARED_LIBS * sizeof(unsigned long);
- reloc = (unsigned long *) (textpos + ntohl(hdr->reloc_start) +
- MAX_SHARED_LIBS * sizeof(unsigned long));
+ datapos = ALIGN(realdatastart +
+ MAX_SHARED_LIBS * sizeof(unsigned long),
+ FLAT_DATA_ALIGN);
+
+ reloc = (unsigned long *)
+ (datapos + (ntohl(hdr->reloc_start) - text_len));
memp = textpos;
memp_size = len;
#ifdef CONFIG_BINFMT_ZFLAT
stack_len = TOP_OF_ARGS - bprm->p; /* the strings */
stack_len += (bprm->argc + 1) * sizeof(char *); /* the argv array */
stack_len += (bprm->envc + 1) * sizeof(char *); /* the envp array */
-
+ stack_len += FLAT_DATA_ALIGN - 1; /* reserve for upcoming alignment */
res = load_flat_file(bprm, &libinfo, 0, &stack_len);
if (res > (unsigned long)-4096)
search_start);
if (block_group && block_group_bits(block_group, data)) {
down_read(&space_info->groups_sem);
- goto have_block_group;
+ if (list_empty(&block_group->list) ||
+ block_group->ro) {
+ /*
+ * someone is removing this block group,
+ * we can't jump into the have_block_group
+ * target because our list pointers are not
+ * valid
+ */
+ btrfs_put_block_group(block_group);
+ up_read(&space_info->groups_sem);
+ } else
+ goto have_block_group;
} else if (block_group) {
btrfs_put_block_group(block_group);
}
* people trying to start a new cluster
*/
spin_lock(&last_ptr->refill_lock);
+ if (last_ptr->block_group &&
+ (last_ptr->block_group->ro ||
+ !block_group_bits(last_ptr->block_group, data))) {
+ offset = 0;
+ goto refill_cluster;
+ }
+
offset = btrfs_alloc_from_cluster(block_group, last_ptr,
num_bytes, search_start);
if (offset) {
last_ptr_loop = 1;
search_start = block_group->key.objectid;
+ /*
+ * we know this block group is properly
+ * in the list because
+ * btrfs_remove_block_group, drops the
+ * cluster before it removes the block
+ * group from the list
+ */
goto have_block_group;
}
spin_unlock(&last_ptr->lock);
-
+refill_cluster:
/*
* this cluster didn't work out, free it and
* start over
{
struct btrfs_path *path;
struct btrfs_block_group_cache *block_group;
+ struct btrfs_free_cluster *cluster;
struct btrfs_key key;
int ret;
memcpy(&key, &block_group->key, sizeof(key));
+ /* make sure this block group isn't part of an allocation cluster */
+ cluster = &root->fs_info->data_alloc_cluster;
+ spin_lock(&cluster->refill_lock);
+ btrfs_return_cluster_to_free_space(block_group, cluster);
+ spin_unlock(&cluster->refill_lock);
+
+ /*
+ * make sure this block group isn't part of a metadata
+ * allocation cluster
+ */
+ cluster = &root->fs_info->meta_alloc_cluster;
+ spin_lock(&cluster->refill_lock);
+ btrfs_return_cluster_to_free_space(block_group, cluster);
+ spin_unlock(&cluster->refill_lock);
+
path = btrfs_alloc_path();
BUG_ON(!path);
spin_unlock(&root->fs_info->block_group_cache_lock);
btrfs_remove_free_space_cache(block_group);
down_write(&block_group->space_info->groups_sem);
- list_del(&block_group->list);
+ /*
+ * we must use list_del_init so people can check to see if they
+ * are still on the list after taking the semaphore
+ */
+ list_del_init(&block_group->list);
up_write(&block_group->space_info->groups_sem);
spin_lock(&block_group->space_info->lock);
device->io_align = root->sectorsize;
device->sector_size = root->sectorsize;
device->total_bytes = i_size_read(bdev->bd_inode);
+ device->disk_total_bytes = device->total_bytes;
device->dev_root = root->fs_info->dev_root;
device->bdev = bdev;
device->in_fs_metadata = 1;
pos += blocksize;
}
+ map_bh.b_size = blocksize;
+ map_bh.b_state = 0;
err = get_block(inode, iblock, &map_bh, 0);
if (err)
goto unlock;
}
/*
- * cf-bind.c
+ * bind.c
*/
extern int cachefiles_daemon_bind(struct cachefiles_cache *cache, char *args);
extern void cachefiles_daemon_unbind(struct cachefiles_cache *cache);
/*
- * cf-daemon.c
+ * daemon.c
*/
extern const struct file_operations cachefiles_daemon_fops;
unsigned fnr, unsigned bnr);
/*
- * cf-interface.c
+ * interface.c
*/
extern const struct fscache_cache_ops cachefiles_cache_ops;
/*
- * cf-key.c
+ * key.c
*/
extern char *cachefiles_cook_key(const u8 *raw, int keylen, uint8_t type);
/*
- * cf-namei.c
+ * namei.c
*/
extern int cachefiles_delete_object(struct cachefiles_cache *cache,
struct cachefiles_object *object);
struct dentry *dir, char *filename);
/*
- * cf-proc.c
+ * proc.c
*/
#ifdef CONFIG_CACHEFILES_HISTOGRAM
extern atomic_t cachefiles_lookup_histogram[HZ];
#endif
/*
- * cf-rdwr.c
+ * rdwr.c
*/
extern int cachefiles_read_or_alloc_page(struct fscache_retrieval *,
struct page *, gfp_t);
extern void cachefiles_uncache_page(struct fscache_object *, struct page *);
/*
- * cf-security.c
+ * security.c
*/
extern int cachefiles_get_security_ID(struct cachefiles_cache *cache);
extern int cachefiles_determine_cache_security(struct cachefiles_cache *cache,
}
/*
- * cf-xattr.c
+ * xattr.c
*/
extern int cachefiles_check_object_type(struct cachefiles_object *object);
extern int cachefiles_set_object_xattr(struct cachefiles_object *object,
#define FSCACHE_MAX_THREADS 32
/*
- * fsc-cache.c
+ * cache.c
*/
extern struct list_head fscache_cache_list;
extern struct rw_semaphore fscache_addremove_sem;
struct fscache_cookie *);
/*
- * fsc-cookie.c
+ * cookie.c
*/
extern struct kmem_cache *fscache_cookie_jar;
extern void __fscache_cookie_put(struct fscache_cookie *);
/*
- * fsc-fsdef.c
+ * fsdef.c
*/
extern struct fscache_cookie fscache_fsdef_index;
extern struct fscache_cookie_def fscache_fsdef_netfs_def;
/*
- * fsc-histogram.c
+ * histogram.c
*/
#ifdef CONFIG_FSCACHE_HISTOGRAM
extern atomic_t fscache_obj_instantiate_histogram[HZ];
#endif
/*
- * fsc-main.c
+ * main.c
*/
extern unsigned fscache_defer_lookup;
extern unsigned fscache_defer_create;
extern int fscache_wait_bit_interruptible(void *);
/*
- * fsc-object.c
+ * object.c
*/
extern void fscache_withdrawing_object(struct fscache_cache *,
struct fscache_object *);
extern void fscache_enqueue_object(struct fscache_object *);
/*
- * fsc-operation.c
+ * operation.c
*/
extern int fscache_submit_exclusive_op(struct fscache_object *,
struct fscache_operation *);
extern void fscache_operation_gc(struct work_struct *);
/*
- * fsc-proc.c
+ * proc.c
*/
#ifdef CONFIG_PROC_FS
extern int __init fscache_proc_init(void);
#endif
/*
- * fsc-stats.c
+ * stats.c
*/
#ifdef CONFIG_FSCACHE_STATS
extern atomic_t fscache_n_ops_processed[FSCACHE_MAX_THREADS];
void destroy_inode(struct inode *inode)
{
BUG_ON(inode_has_buffers(inode));
+ ima_inode_free(inode);
security_inode_free(inode);
if (inode->i_sb->s_op->destroy_inode)
inode->i_sb->s_op->destroy_inode(inode);
struct super_block *sb = inode->i_sb;
ino_t ino = inode->i_ino;
struct hlist_head *head = inode_hashtable + hash(sb, ino);
- struct inode *old;
inode->i_state |= I_LOCK|I_NEW;
while (1) {
+ struct hlist_node *node;
+ struct inode *old = NULL;
spin_lock(&inode_lock);
- old = find_inode_fast(sb, head, ino);
- if (likely(!old)) {
+ hlist_for_each_entry(old, node, head, i_hash) {
+ if (old->i_ino != ino)
+ continue;
+ if (old->i_sb != sb)
+ continue;
+ if (old->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE))
+ continue;
+ break;
+ }
+ if (likely(!node)) {
hlist_add_head(&inode->i_hash, head);
spin_unlock(&inode_lock);
return 0;
{
struct super_block *sb = inode->i_sb;
struct hlist_head *head = inode_hashtable + hash(sb, hashval);
- struct inode *old;
inode->i_state |= I_LOCK|I_NEW;
while (1) {
+ struct hlist_node *node;
+ struct inode *old = NULL;
+
spin_lock(&inode_lock);
- old = find_inode(sb, head, test, data);
- if (likely(!old)) {
+ hlist_for_each_entry(old, node, head, i_hash) {
+ if (old->i_sb != sb)
+ continue;
+ if (!test(old, data))
+ continue;
+ if (old->i_state & (I_FREEING|I_CLEAR|I_WILL_FREE))
+ continue;
+ break;
+ }
+ if (likely(!node)) {
hlist_add_head(&inode->i_hash, head);
spin_unlock(&inode_lock);
return 0;
spin_lock(&journal->j_list_lock);
}
/* Someone already cleaned up the buffer? */
- if (!buffer_jbd(bh)
+ if (!buffer_jbd(bh) || bh2jh(bh) != jh
|| jh->b_transaction != commit_transaction
|| jh->b_jlist != BJ_SyncData) {
jbd_unlock_bh_state(bh);
spin_lock(&journal->j_list_lock);
continue;
}
- if (buffer_jbd(bh) && jh->b_jlist == BJ_Locked) {
+ if (buffer_jbd(bh) && bh2jh(bh) == jh &&
+ jh->b_transaction == commit_transaction &&
+ jh->b_jlist == BJ_Locked) {
__journal_unfile_buffer(jh);
jbd_unlock_bh_state(bh);
journal_remove_journal_head(bh);
return;
filebad:
- mutex_lock(&c->erase_free_sem);
- spin_lock(&c->erase_completion_lock);
- /* Stick it on a list (any list) so erase_failed can take it
- right off again. Silly, but shouldn't happen often. */
- list_move(&jeb->list, &c->erasing_list);
- spin_unlock(&c->erase_completion_lock);
- mutex_unlock(&c->erase_free_sem);
jffs2_erase_failed(c, jeb, bad_offset);
return;
host_err = vfs_writev(file, (struct iovec __user *)vec, vlen, &offset);
set_fs(oldfs);
if (host_err >= 0) {
+ *cnt = host_err;
nfsdstats.io_write += host_err;
fsnotify_modify(file->f_path.dentry);
}
}
dprintk("nfsd: write complete host_err=%d\n", host_err);
- if (host_err >= 0) {
+ if (host_err >= 0)
err = 0;
- *cnt = host_err;
- } else
+ else
err = nfserrno(host_err);
out:
return err;
ret = nilfs_cpfile_get_checkpoint_block(cpfile, cno, 0, &cp_bh);
if (ret < 0) {
if (ret != -ENOENT)
- goto out_sem;
+ goto out_header;
/* skip hole */
ret = 0;
continue;
continue;
printk(KERN_ERR "%s: cannot delete block\n",
__func__);
- goto out_sem;
+ goto out_header;
}
}
nilfs_mdt_mark_dirty(cpfile);
kunmap_atomic(kaddr, KM_USER0);
}
+
+ out_header:
brelse(header_bh);
out_sem:
const struct pid_entry *p = ptr;
struct inode *inode;
struct proc_inode *ei;
- struct dentry *error = ERR_PTR(-EINVAL);
+ struct dentry *error = ERR_PTR(-ENOENT);
inode = proc_pid_make_inode(dir->i_sb, task);
if (!inode)
static int loadavg_proc_show(struct seq_file *m, void *v)
{
- int a, b, c;
- unsigned long seq;
+ unsigned long avnrun[3];
- do {
- seq = read_seqbegin(&xtime_lock);
- a = avenrun[0] + (FIXED_1/200);
- b = avenrun[1] + (FIXED_1/200);
- c = avenrun[2] + (FIXED_1/200);
- } while (read_seqretry(&xtime_lock, seq));
+ get_avenrun(avnrun, FIXED_1/200, 0);
- seq_printf(m, "%d.%02d %d.%02d %d.%02d %ld/%d %d\n",
- LOAD_INT(a), LOAD_FRAC(a),
- LOAD_INT(b), LOAD_FRAC(b),
- LOAD_INT(c), LOAD_FRAC(c),
+ seq_printf(m, "%lu.%02lu %lu.%02lu %lu.%02lu %ld/%d %d\n",
+ LOAD_INT(avnrun[0]), LOAD_FRAC(avnrun[0]),
+ LOAD_INT(avnrun[1]), LOAD_FRAC(avnrun[1]),
+ LOAD_INT(avnrun[2]), LOAD_FRAC(avnrun[2]),
nr_running(), nr_threads,
task_active_pid_ns(current)->last_pid);
return 0;
mutex_unlock(&sysfs_workq_mutex);
if (sysfs_workqueue == NULL) {
- sysfs_workqueue = create_workqueue("sysfsd");
+ sysfs_workqueue = create_singlethread_workqueue("sysfsd");
if (sysfs_workqueue == NULL) {
module_put(owner);
return -ENOMEM;
static inline int
kmem_shake_allow(gfp_t gfp_mask)
{
- return (gfp_mask & __GFP_WAIT) != 0;
+ return ((gfp_mask & __GFP_WAIT) && (gfp_mask & __GFP_FS));
}
#endif /* __XFS_SUPPORT_KMEM_H__ */
error = xfs_trans_commit(tp, XFS_TRANS_SWAPEXT);
-out_unlock:
- xfs_iunlock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
- xfs_iunlock(tip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
out:
kmem_free(tempifp);
return error;
+out_unlock:
+ xfs_iunlock(ip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
+ xfs_iunlock(tip, XFS_ILOCK_EXCL | XFS_IOLOCK_EXCL);
+ goto out;
+
out_trans_cancel:
xfs_trans_cancel(tp, 0);
goto out_unlock;
nagcount = new + (nb_mod != 0);
if (nb_mod && nb_mod < XFS_MIN_AG_BLOCKS) {
nagcount--;
- nb = nagcount * mp->m_sb.sb_agblocks;
+ nb = (xfs_rfsblock_t)nagcount * mp->m_sb.sb_agblocks;
if (nb < mp->m_sb.sb_dblocks)
return XFS_ERROR(EINVAL);
}
u32 property_ids[DRM_CONNECTOR_MAX_PROPERTY];
uint64_t property_values[DRM_CONNECTOR_MAX_PROPERTY];
+ /* requested DPMS state */
+ int dpms;
+
void *helper_private;
uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER];
struct drm_framebuffer *old_fb);
extern bool drm_helper_crtc_in_use(struct drm_crtc *crtc);
+extern void drm_helper_connector_dpms(struct drm_connector *connector, int mode);
+
extern int drm_helper_mode_fill_fb_struct(struct drm_framebuffer *fb,
struct drm_mode_fb_cmd *mode_cmd);
extern int sbf_port;
extern unsigned long acpi_realmode_flags;
-int acpi_register_gsi (u32 gsi, int triggering, int polarity);
+int acpi_register_gsi (struct device *dev, u32 gsi, int triggering, int polarity);
int acpi_gsi_to_irq (u32 gsi, unsigned int *irq);
#ifdef CONFIG_X86_IO_APIC
#define UART01x_FR_MODEM_ANY (UART01x_FR_DCD|UART01x_FR_DSR|UART01x_FR_CTS)
#ifndef __ASSEMBLY__
+struct amba_device; /* in uncompress this is included but amba/bus.h is not */
struct amba_pl010_data {
void (*set_mctrl)(struct amba_device *dev, void __iomem *base, unsigned int mctrl);
};
#ifndef _LINUX_AUTO_FS_H
#define _LINUX_AUTO_FS_H
+#include <linux/types.h>
#ifdef __KERNEL__
#include <linux/fs.h>
#include <linux/limits.h>
-#include <linux/types.h>
#include <linux/ioctl.h>
#else
-#include <asm/types.h>
#include <sys/ioctl.h>
#endif /* __KERNEL__ */
bool alloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags, int node);
bool alloc_cpumask_var(cpumask_var_t *mask, gfp_t flags);
+bool zalloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags, int node);
+bool zalloc_cpumask_var(cpumask_var_t *mask, gfp_t flags);
void alloc_bootmem_cpumask_var(cpumask_var_t *mask);
void free_cpumask_var(cpumask_var_t mask);
void free_bootmem_cpumask_var(cpumask_var_t mask);
return true;
}
+static inline bool zalloc_cpumask_var(cpumask_var_t *mask, gfp_t flags)
+{
+ cpumask_clear(*mask);
+ return true;
+}
+
+static inline bool zalloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags,
+ int node)
+{
+ cpumask_clear(*mask);
+ return true;
+}
+
static inline void alloc_bootmem_cpumask_var(cpumask_var_t *mask)
{
}
#define _LINUX_CRED_H
#include <linux/capability.h>
+#include <linux/init.h>
#include <linux/key.h>
#include <asm/atomic.h>
};
#ifdef CONFIG_INTR_REMAP
extern int intr_remapping_enabled;
+extern int intr_remapping_supported(void);
extern int enable_intr_remapping(int);
extern void disable_intr_remapping(void);
extern int reenable_intr_remapping(int);
}
#define irq_remapped(irq) (0)
#define enable_intr_remapping(mode) (-1)
+#define disable_intr_remapping() (0)
+#define reenable_intr_remapping(mode) (0)
#define intr_remapping_enabled (0)
#endif
struct fbd_ioat {
unsigned int vendor;
unsigned int ioat_dev;
+ unsigned int enabled;
};
/*
* The i5000 chip-set has the same hooks as the i7300
- * but support is disabled by default because this driver
- * has not been validated on that platform.
+ * but it is not enabled by default and must be manually
+ * manually enabled with "forceload=1" because it is
+ * only lightly validated.
*/
-#define SUPPORT_I5000 0
static const struct fbd_ioat fbd_ioat_list[] = {
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB},
-#if SUPPORT_I5000
- {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT},
-#endif
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT_CNB, 1},
+ {PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_IOAT, 0},
{0, 0}
};
/* table of devices that work with this driver */
static const struct pci_device_id pci_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_FBD_CNB) },
-#if SUPPORT_I5000
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_5000_ERR) },
-#endif
{ } /* Terminating entry */
};
/* Check for known platforms with I/O-AT */
static inline int i7300_idle_platform_probe(struct pci_dev **fbd_dev,
- struct pci_dev **ioat_dev)
+ struct pci_dev **ioat_dev,
+ int enable_all)
{
int i;
struct pci_dev *memdev, *dmadev;
for (i = 0; fbd_ioat_list[i].vendor != 0; i++) {
if (dmadev->vendor == fbd_ioat_list[i].vendor &&
dmadev->device == fbd_ioat_list[i].ioat_dev) {
+ if (!(fbd_ioat_list[i].enabled || enable_all))
+ continue;
if (fbd_dev)
*fbd_dev = memdev;
if (ioat_dev)
#define ABS_MT_POSITION_Y 0x36 /* Center Y ellipse position */
#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */
+#define ABS_MT_TRACKING_ID 0x39 /* Unique ID of initiated contact */
#define ABS_MAX 0x3f
#define ABS_CNT (ABS_MAX+1)
extern int early_irq_init(void);
extern int arch_probe_nr_irqs(void);
extern int arch_early_irq_init(void);
-extern int arch_init_chip_data(struct irq_desc *desc, int cpu);
+extern int arch_init_chip_data(struct irq_desc *desc, int node);
#endif
void (*eoi)(unsigned int irq);
void (*end)(unsigned int irq);
- void (*set_affinity)(unsigned int irq,
+ int (*set_affinity)(unsigned int irq,
const struct cpumask *dest);
int (*retrigger)(unsigned int irq);
int (*set_type)(unsigned int irq, unsigned int flow_type);
spinlock_t lock;
#ifdef CONFIG_SMP
cpumask_var_t affinity;
- unsigned int cpu;
+ unsigned int node;
#ifdef CONFIG_GENERIC_PENDING_IRQ
cpumask_var_t pending_mask;
#endif
} ____cacheline_internodealigned_in_smp;
extern void arch_init_copy_chip_data(struct irq_desc *old_desc,
- struct irq_desc *desc, int cpu);
+ struct irq_desc *desc, int node);
extern void arch_free_chip_data(struct irq_desc *old_desc, struct irq_desc *desc);
#ifndef CONFIG_SPARSE_IRQ
extern struct irq_desc irq_desc[NR_IRQS];
-#else /* CONFIG_SPARSE_IRQ */
-extern struct irq_desc *move_irq_desc(struct irq_desc *old_desc, int cpu);
-#endif /* CONFIG_SPARSE_IRQ */
-
-extern struct irq_desc *irq_to_desc_alloc_cpu(unsigned int irq, int cpu);
+#endif
-static inline struct irq_desc *
-irq_remap_to_desc(unsigned int irq, struct irq_desc *desc)
-{
-#ifdef CONFIG_NUMA_MIGRATE_IRQ_DESC
- return irq_to_desc(irq);
+#ifdef CONFIG_NUMA_IRQ_DESC
+extern struct irq_desc *move_irq_desc(struct irq_desc *old_desc, int node);
#else
+static inline struct irq_desc *move_irq_desc(struct irq_desc *desc, int node)
+{
return desc;
-#endif
}
+#endif
+
+extern struct irq_desc *irq_to_desc_alloc_node(unsigned int irq, int node);
/*
* Migration helpers for obsolete names, they will go away:
extern void set_irq_probe(unsigned int irq);
/* Handle dynamic irq creation and destruction */
-extern unsigned int create_irq_nr(unsigned int irq_want);
+extern unsigned int create_irq_nr(unsigned int irq_want, int node);
extern int create_irq(void);
extern void destroy_irq(unsigned int irq);
#ifdef CONFIG_SMP
/**
- * init_alloc_desc_masks - allocate cpumasks for irq_desc
+ * alloc_desc_masks - allocate cpumasks for irq_desc
* @desc: pointer to irq_desc struct
* @cpu: cpu which will be handling the cpumasks
* @boot: true if need bootmem
*
* Allocates affinity and pending_mask cpumask if required.
* Returns true if successful (or not required).
- * Side effect: affinity has all bits set, pending_mask has all bits clear.
*/
-static inline bool init_alloc_desc_masks(struct irq_desc *desc, int cpu,
+static inline bool alloc_desc_masks(struct irq_desc *desc, int node,
bool boot)
{
- int node;
-
+#ifdef CONFIG_CPUMASK_OFFSTACK
if (boot) {
alloc_bootmem_cpumask_var(&desc->affinity);
- cpumask_setall(desc->affinity);
#ifdef CONFIG_GENERIC_PENDING_IRQ
alloc_bootmem_cpumask_var(&desc->pending_mask);
- cpumask_clear(desc->pending_mask);
#endif
return true;
}
- node = cpu_to_node(cpu);
-
if (!alloc_cpumask_var_node(&desc->affinity, GFP_ATOMIC, node))
return false;
- cpumask_setall(desc->affinity);
#ifdef CONFIG_GENERIC_PENDING_IRQ
if (!alloc_cpumask_var_node(&desc->pending_mask, GFP_ATOMIC, node)) {
free_cpumask_var(desc->affinity);
return false;
}
- cpumask_clear(desc->pending_mask);
+#endif
#endif
return true;
}
+static inline void init_desc_masks(struct irq_desc *desc)
+{
+ cpumask_setall(desc->affinity);
+#ifdef CONFIG_GENERIC_PENDING_IRQ
+ cpumask_clear(desc->pending_mask);
+#endif
+}
+
/**
* init_copy_desc_masks - copy cpumasks for irq_desc
* @old_desc: pointer to old irq_desc struct
static inline void init_copy_desc_masks(struct irq_desc *old_desc,
struct irq_desc *new_desc)
{
-#ifdef CONFIG_CPUMASKS_OFFSTACK
+#ifdef CONFIG_CPUMASK_OFFSTACK
cpumask_copy(new_desc->affinity, old_desc->affinity);
#ifdef CONFIG_GENERIC_PENDING_IRQ
#else /* !CONFIG_SMP */
-static inline bool init_alloc_desc_masks(struct irq_desc *desc, int cpu,
+static inline bool alloc_desc_masks(struct irq_desc *desc, int node,
bool boot)
{
return true;
}
+static inline void init_desc_masks(struct irq_desc *desc)
+{
+}
+
static inline void init_copy_desc_masks(struct irq_desc *old_desc,
struct irq_desc *new_desc)
{
unsigned long end_pfn);
extern void remove_active_range(unsigned int nid, unsigned long start_pfn,
unsigned long end_pfn);
-extern void push_node_boundaries(unsigned int nid, unsigned long start_pfn,
- unsigned long end_pfn);
extern void remove_all_active_ranges(void);
extern unsigned long absent_pages_in_range(unsigned long start_pfn,
unsigned long end_pfn);
#ifndef __NET_DROPMON_H
#define __NET_DROPMON_H
+#include <linux/types.h>
#include <linux/netlink.h>
struct net_dm_drop_point {
/* Has unacknowledged data */
#define IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED 0x10
+/* The field td_maxack has been set */
+#define IP_CT_TCP_FLAG_MAXACK_SET 0x20
+
struct nf_ct_tcp_flags {
__u8 flags;
__u8 mask;
u_int32_t td_end; /* max of seq + len */
u_int32_t td_maxend; /* max of ack + max(win, 1) */
u_int32_t td_maxwin; /* max(win) */
+ u_int32_t td_maxack; /* max of ack */
u_int8_t td_scale; /* window scale factor */
u_int8_t flags; /* per direction options */
};
int spintime;
atomic_t ref_count;
+ unsigned long devflags;
+#define PARPORT_DEVPROC_REGISTERED 0
+ struct pardevice *proc_device; /* Currently register proc device */
+
struct list_head full_list;
struct parport *slaves[3];
};
* 11 bit fractions.
*/
extern unsigned long avenrun[]; /* Load averages */
+extern void get_avenrun(unsigned long *loads, unsigned long offset, int shift);
#define FSHIFT 11 /* nr of bits of precision */
#define FIXED_1 (1<<FSHIFT) /* 1.0 as fixed-point */
extern int nr_processes(void);
extern unsigned long nr_running(void);
extern unsigned long nr_uninterruptible(void);
-extern unsigned long nr_active(void);
extern unsigned long nr_iowait(void);
+extern void calc_global_load(void);
extern unsigned long get_parent_ip(unsigned long addr);
*/
u32 reciprocal_cpu_power;
- unsigned long cpumask[];
+ /*
+ * The CPUs this group covers.
+ *
+ * NOTE: this field is variable length. (Allocated dynamically
+ * by attaching extra space to the end of the structure,
+ * depending on how many CPUs the kernel has booted up with)
+ *
+ * It is also be embedded into static data structures at build
+ * time. (See 'struct static_sched_group' in kernel/sched.c)
+ */
+ unsigned long cpumask[0];
};
static inline struct cpumask *sched_group_cpus(struct sched_group *sg)
char *name;
#endif
- /* span of all CPUs in this domain */
- unsigned long span[];
+ /*
+ * Span of all CPUs in this domain.
+ *
+ * NOTE: this field is variable length. (Allocated dynamically
+ * by attaching extra space to the end of the structure,
+ * depending on how many CPUs the kernel has booted up with)
+ *
+ * It is also be embedded into static data structures at build
+ * time. (See 'struct static_sched_domain' in kernel/sched.c)
+ */
+ unsigned long span[0];
};
static inline struct cpumask *sched_domain_span(struct sched_domain *sd)
return 0;
}
+static inline void
+mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent)
+{
+}
+
#endif /* CONFIG_SWAP */
#endif /* __KERNEL__*/
#endif /* _LINUX_SWAP_H */
/**
* tracehook_report_clone - in parent, new child is about to start running
- * @trace: return value from tracehook_prepare_clone()
* @regs: parent's user register state
* @clone_flags: flags from parent's system call
* @pid: new child's PID in the parent's namespace
* @child: new child task
*
- * Called after a child is set up, but before it has been started
- * running. @trace is the value returned by tracehook_prepare_clone().
+ * Called after a child is set up, but before it has been started running.
* This is not a good place to block, because the child has not started
* yet. Suspend the child here if desired, and then block in
* tracehook_report_clone_complete(). This must prevent the child from
*
* Called with no locks held, but the child cannot run until this returns.
*/
-static inline void tracehook_report_clone(int trace, struct pt_regs *regs,
+static inline void tracehook_report_clone(struct pt_regs *regs,
unsigned long clone_flags,
pid_t pid, struct task_struct *child)
{
- if (unlikely(trace) || unlikely(clone_flags & CLONE_PTRACE)) {
+ if (unlikely(task_ptrace(child))) {
/*
- * The child starts up with an immediate SIGSTOP.
+ * It doesn't matter who attached/attaching to this
+ * task, the pending SIGSTOP is right in any case.
*/
sigaddset(&child->pending.signal, SIGSTOP);
set_tsk_thread_flag(child, TIF_SIGPENDING);
list_del(&old->task_list);
}
-void __wake_up_common(wait_queue_head_t *q, unsigned int mode,
- int nr_exclusive, int sync, void *key);
void __wake_up(wait_queue_head_t *q, unsigned int mode, int nr, void *key);
void __wake_up_locked_key(wait_queue_head_t *q, unsigned int mode, void *key);
void __wake_up_sync_key(wait_queue_head_t *q, unsigned int mode, int nr,
SYSCALL_DEFINE1(shmdt, char __user *, shmaddr)
{
struct mm_struct *mm = current->mm;
- struct vm_area_struct *vma, *next;
+ struct vm_area_struct *vma;
unsigned long addr = (unsigned long)shmaddr;
- loff_t size = 0;
int retval = -EINVAL;
+#ifdef CONFIG_MMU
+ loff_t size = 0;
+ struct vm_area_struct *next;
+#endif
if (addr & ~PAGE_MASK)
return retval;
static async_cookie_t __lowest_in_progress(struct list_head *running)
{
struct async_entry *entry;
- async_cookie_t ret = next_cookie; /* begin with "infinity" value */
if (!list_empty(running)) {
entry = list_first_entry(running,
struct async_entry, list);
- ret = entry->cookie;
+ return entry->cookie;
}
- if (!list_empty(&async_pending)) {
- list_for_each_entry(entry, &async_pending, list)
- if (entry->running == running) {
- ret = entry->cookie;
- break;
- }
- }
+ list_for_each_entry(entry, &async_pending, list)
+ if (entry->running == running)
+ return entry->cookie;
- return ret;
+ return next_cookie; /* "infinity" value */
}
static async_cookie_t lowest_in_progress(struct list_head *running)
}
audit_finish_fork(p);
- tracehook_report_clone(trace, regs, clone_flags, nr, p);
+ tracehook_report_clone(regs, clone_flags, nr, p);
/*
* We set PF_STARTING at creation in case tracing wants to
obj-$(CONFIG_GENERIC_IRQ_PROBE) += autoprobe.o
obj-$(CONFIG_PROC_FS) += proc.o
obj-$(CONFIG_GENERIC_PENDING_IRQ) += migration.o
-obj-$(CONFIG_NUMA_MIGRATE_IRQ_DESC) += numa_migrate.o
+obj-$(CONFIG_NUMA_IRQ_DESC) += numa_migrate.o
obj-$(CONFIG_PM_SLEEP) += pm.o
spin_lock(&desc->lock);
mask_ack_irq(desc, irq);
- desc = irq_remap_to_desc(irq, desc);
if (unlikely(desc->status & IRQ_INPROGRESS))
goto out_unlock;
desc->status &= ~IRQ_INPROGRESS;
out:
desc->chip->eoi(irq);
- desc = irq_remap_to_desc(irq, desc);
spin_unlock(&desc->lock);
}
!desc->action)) {
desc->status |= (IRQ_PENDING | IRQ_MASKED);
mask_ack_irq(desc, irq);
- desc = irq_remap_to_desc(irq, desc);
goto out_unlock;
}
kstat_incr_irqs_this_cpu(irq, desc);
/* Start handling the irq */
if (desc->chip->ack)
desc->chip->ack(irq);
- desc = irq_remap_to_desc(irq, desc);
/* Mark the IRQ currently in progress.*/
desc->status |= IRQ_INPROGRESS;
if (!noirqdebug)
note_interrupt(irq, desc, action_ret);
- if (desc->chip->eoi) {
+ if (desc->chip->eoi)
desc->chip->eoi(irq);
- desc = irq_remap_to_desc(irq, desc);
- }
}
void
/* Uninstall? */
if (handle == handle_bad_irq) {
- if (desc->chip != &no_irq_chip) {
+ if (desc->chip != &no_irq_chip)
mask_ack_irq(desc, irq);
- desc = irq_remap_to_desc(irq, desc);
- }
desc->status |= IRQ_DISABLED;
desc->depth = 1;
}
*/
#include <linux/irq.h>
+#include <linux/slab.h>
#include <linux/module.h>
#include <linux/random.h>
#include <linux/interrupt.h>
.lock = __SPIN_LOCK_UNLOCKED(irq_desc_init.lock),
};
-void init_kstat_irqs(struct irq_desc *desc, int cpu, int nr)
+void __ref init_kstat_irqs(struct irq_desc *desc, int node, int nr)
{
- int node;
void *ptr;
- node = cpu_to_node(cpu);
- ptr = kzalloc_node(nr * sizeof(*desc->kstat_irqs), GFP_ATOMIC, node);
+ if (slab_is_available())
+ ptr = kzalloc_node(nr * sizeof(*desc->kstat_irqs),
+ GFP_ATOMIC, node);
+ else
+ ptr = alloc_bootmem_node(NODE_DATA(node),
+ nr * sizeof(*desc->kstat_irqs));
/*
* don't overwite if can not get new one
* init_copy_kstat_irqs() could still use old one
*/
if (ptr) {
- printk(KERN_DEBUG " alloc kstat_irqs on cpu %d node %d\n",
- cpu, node);
+ printk(KERN_DEBUG " alloc kstat_irqs on node %d\n", node);
desc->kstat_irqs = ptr;
}
}
-static void init_one_irq_desc(int irq, struct irq_desc *desc, int cpu)
+static void init_one_irq_desc(int irq, struct irq_desc *desc, int node)
{
memcpy(desc, &irq_desc_init, sizeof(struct irq_desc));
spin_lock_init(&desc->lock);
desc->irq = irq;
#ifdef CONFIG_SMP
- desc->cpu = cpu;
+ desc->node = node;
#endif
lockdep_set_class(&desc->lock, &irq_desc_lock_class);
- init_kstat_irqs(desc, cpu, nr_cpu_ids);
+ init_kstat_irqs(desc, node, nr_cpu_ids);
if (!desc->kstat_irqs) {
printk(KERN_ERR "can not alloc kstat_irqs\n");
BUG_ON(1);
}
- if (!init_alloc_desc_masks(desc, cpu, false)) {
+ if (!alloc_desc_masks(desc, node, false)) {
printk(KERN_ERR "can not alloc irq_desc cpumasks\n");
BUG_ON(1);
}
- arch_init_chip_data(desc, cpu);
+ init_desc_masks(desc);
+ arch_init_chip_data(desc, node);
}
/*
desc[i].irq = i;
desc[i].kstat_irqs = kstat_irqs_legacy + i * nr_cpu_ids;
lockdep_set_class(&desc[i].lock, &irq_desc_lock_class);
- init_alloc_desc_masks(&desc[i], 0, true);
+ alloc_desc_masks(&desc[i], 0, true);
+ init_desc_masks(&desc[i]);
irq_desc_ptrs[i] = desc + i;
}
return NULL;
}
-struct irq_desc *irq_to_desc_alloc_cpu(unsigned int irq, int cpu)
+struct irq_desc * __ref irq_to_desc_alloc_node(unsigned int irq, int node)
{
struct irq_desc *desc;
unsigned long flags;
- int node;
if (irq >= nr_irqs) {
WARN(1, "irq (%d) >= nr_irqs (%d) in irq_to_desc_alloc\n",
if (desc)
goto out_unlock;
- node = cpu_to_node(cpu);
- desc = kzalloc_node(sizeof(*desc), GFP_ATOMIC, node);
- printk(KERN_DEBUG " alloc irq_desc for %d on cpu %d node %d\n",
- irq, cpu, node);
+ if (slab_is_available())
+ desc = kzalloc_node(sizeof(*desc), GFP_ATOMIC, node);
+ else
+ desc = alloc_bootmem_node(NODE_DATA(node), sizeof(*desc));
+
+ printk(KERN_DEBUG " alloc irq_desc for %d on node %d\n", irq, node);
if (!desc) {
printk(KERN_ERR "can not alloc irq_desc\n");
BUG_ON(1);
}
- init_one_irq_desc(irq, desc, cpu);
+ init_one_irq_desc(irq, desc, node);
irq_desc_ptrs[irq] = desc;
for (i = 0; i < count; i++) {
desc[i].irq = i;
- init_alloc_desc_masks(&desc[i], 0, true);
+ alloc_desc_masks(&desc[i], 0, true);
+ init_desc_masks(&desc[i]);
desc[i].kstat_irqs = kstat_irqs_all[i];
}
return arch_early_irq_init();
return (irq < NR_IRQS) ? irq_desc + irq : NULL;
}
-struct irq_desc *irq_to_desc_alloc_cpu(unsigned int irq, int cpu)
+struct irq_desc *irq_to_desc_alloc_node(unsigned int irq, int node)
{
return irq_to_desc(irq);
}
/*
* No locking required for CPU-local interrupts:
*/
- if (desc->chip->ack) {
+ if (desc->chip->ack)
desc->chip->ack(irq);
- /* get new one */
- desc = irq_remap_to_desc(irq, desc);
- }
if (likely(!(desc->status & IRQ_DISABLED))) {
action_ret = handle_IRQ_event(irq, desc->action);
if (!noirqdebug)
}
spin_lock(&desc->lock);
- if (desc->chip->ack) {
+ if (desc->chip->ack)
desc->chip->ack(irq);
- desc = irq_remap_to_desc(irq, desc);
- }
/*
* REPLAY is when Linux resends an IRQ that was dropped earlier
* WAITING is used by probe to mark irqs that are being tested
extern void __enable_irq(struct irq_desc *desc, unsigned int irq, bool resume);
extern struct lock_class_key irq_desc_lock_class;
-extern void init_kstat_irqs(struct irq_desc *desc, int cpu, int nr);
+extern void init_kstat_irqs(struct irq_desc *desc, int node, int nr);
extern void clear_kstat_irqs(struct irq_desc *desc);
extern spinlock_t sparse_irq_lock;
extern int irq_select_affinity_usr(unsigned int irq);
+extern void
+irq_set_thread_affinity(struct irq_desc *desc, const struct cpumask *cpumask);
+
/*
* Debugging printout:
*/
return 1;
}
-static void
+void
irq_set_thread_affinity(struct irq_desc *desc, const struct cpumask *cpumask)
{
struct irqaction *action = desc->action;
spin_lock_irqsave(&desc->lock, flags);
#ifdef CONFIG_GENERIC_PENDING_IRQ
- if (desc->status & IRQ_MOVE_PCNTXT)
- desc->chip->set_affinity(irq, cpumask);
+ if (desc->status & IRQ_MOVE_PCNTXT) {
+ if (!desc->chip->set_affinity(irq, cpumask)) {
+ cpumask_copy(desc->affinity, cpumask);
+ irq_set_thread_affinity(desc, cpumask);
+ }
+ }
else {
desc->status |= IRQ_MOVE_PENDING;
cpumask_copy(desc->pending_mask, cpumask);
}
#else
- cpumask_copy(desc->affinity, cpumask);
- desc->chip->set_affinity(irq, cpumask);
+ if (!desc->chip->set_affinity(irq, cpumask)) {
+ cpumask_copy(desc->affinity, cpumask);
+ irq_set_thread_affinity(desc, cpumask);
+ }
#endif
- irq_set_thread_affinity(desc, cpumask);
desc->status |= IRQ_AFFINITY_SET;
spin_unlock_irqrestore(&desc->lock, flags);
return 0;
#include <linux/irq.h>
+#include <linux/interrupt.h>
+
+#include "internals.h"
void move_masked_irq(int irq)
{
* masking the irqs.
*/
if (likely(cpumask_any_and(desc->pending_mask, cpu_online_mask)
- < nr_cpu_ids)) {
- cpumask_and(desc->affinity,
- desc->pending_mask, cpu_online_mask);
- desc->chip->set_affinity(irq, desc->affinity);
- }
+ < nr_cpu_ids))
+ if (!desc->chip->set_affinity(irq, desc->pending_mask)) {
+ cpumask_copy(desc->affinity, desc->pending_mask);
+ irq_set_thread_affinity(desc, desc->pending_mask);
+ }
+
cpumask_clear(desc->pending_mask);
}
static void init_copy_kstat_irqs(struct irq_desc *old_desc,
struct irq_desc *desc,
- int cpu, int nr)
+ int node, int nr)
{
- init_kstat_irqs(desc, cpu, nr);
+ init_kstat_irqs(desc, node, nr);
if (desc->kstat_irqs != old_desc->kstat_irqs)
memcpy(desc->kstat_irqs, old_desc->kstat_irqs,
}
static bool init_copy_one_irq_desc(int irq, struct irq_desc *old_desc,
- struct irq_desc *desc, int cpu)
+ struct irq_desc *desc, int node)
{
memcpy(desc, old_desc, sizeof(struct irq_desc));
- if (!init_alloc_desc_masks(desc, cpu, false)) {
+ if (!alloc_desc_masks(desc, node, false)) {
printk(KERN_ERR "irq %d: can not get new irq_desc cpumask "
"for migration.\n", irq);
return false;
}
spin_lock_init(&desc->lock);
- desc->cpu = cpu;
+ desc->node = node;
lockdep_set_class(&desc->lock, &irq_desc_lock_class);
- init_copy_kstat_irqs(old_desc, desc, cpu, nr_cpu_ids);
+ init_copy_kstat_irqs(old_desc, desc, node, nr_cpu_ids);
init_copy_desc_masks(old_desc, desc);
- arch_init_copy_chip_data(old_desc, desc, cpu);
+ arch_init_copy_chip_data(old_desc, desc, node);
return true;
}
}
static struct irq_desc *__real_move_irq_desc(struct irq_desc *old_desc,
- int cpu)
+ int node)
{
struct irq_desc *desc;
unsigned int irq;
unsigned long flags;
- int node;
irq = old_desc->irq;
if (desc && old_desc != desc)
goto out_unlock;
- node = cpu_to_node(cpu);
desc = kzalloc_node(sizeof(*desc), GFP_ATOMIC, node);
if (!desc) {
printk(KERN_ERR "irq %d: can not get new irq_desc "
desc = old_desc;
goto out_unlock;
}
- if (!init_copy_one_irq_desc(irq, old_desc, desc, cpu)) {
+ if (!init_copy_one_irq_desc(irq, old_desc, desc, node)) {
/* still use old one */
kfree(desc);
desc = old_desc;
/* free the old one */
free_one_irq_desc(old_desc, desc);
- spin_unlock(&old_desc->lock);
kfree(old_desc);
- spin_lock(&desc->lock);
return desc;
return desc;
}
-struct irq_desc *move_irq_desc(struct irq_desc *desc, int cpu)
+struct irq_desc *move_irq_desc(struct irq_desc *desc, int node)
{
- int old_cpu;
- int node, old_node;
-
/* those all static, do move them */
if (desc->irq < NR_IRQS_LEGACY)
return desc;
- old_cpu = desc->cpu;
- if (old_cpu != cpu) {
- node = cpu_to_node(cpu);
- old_node = cpu_to_node(old_cpu);
- if (old_node != node)
- desc = __real_move_irq_desc(desc, cpu);
- else
- desc->cpu = cpu;
- }
+ if (desc->node != node)
+ desc = __real_move_irq_desc(desc, node);
return desc;
}
/* didnt get the lock, go to sleep: */
spin_unlock_mutex(&lock->wait_lock, flags);
- __schedule();
+ preempt_enable_no_resched();
+ schedule();
+ preempt_disable();
spin_lock_mutex(&lock->wait_lock, flags);
}
if (child->ptrace) {
child->exit_code = data;
dead = __ptrace_detach(current, child);
+ if (!child->exit_state)
+ wake_up_process(child);
}
write_unlock_irq(&tasklist_lock);
struct list_head migration_queue;
#endif
+ /* calc_load related fields */
+ unsigned long calc_load_update;
+ long calc_load_active;
+
#ifdef CONFIG_SCHED_HRTICK
#ifdef CONFIG_SMP
int hrtick_csd_pending;
}
#endif
+static void calc_load_account_active(struct rq *this_rq);
+
#include "sched_stats.h"
#include "sched_idletask.c"
#include "sched_fair.c"
return success;
}
+/**
+ * wake_up_process - Wake up a specific process
+ * @p: The process to be woken up.
+ *
+ * Attempt to wake up the nominated process and move it to the set of runnable
+ * processes. Returns 1 if the process was woken up, 0 if it was already
+ * running.
+ *
+ * It may be assumed that this function implies a write memory barrier before
+ * changing the task state if and only if any tasks are woken up.
+ */
int wake_up_process(struct task_struct *p)
{
return try_to_wake_up(p, TASK_ALL, 0);
return sum;
}
-unsigned long nr_active(void)
+/* Variables and functions for calc_load */
+static atomic_long_t calc_load_tasks;
+static unsigned long calc_load_update;
+unsigned long avenrun[3];
+EXPORT_SYMBOL(avenrun);
+
+/**
+ * get_avenrun - get the load average array
+ * @loads: pointer to dest load array
+ * @offset: offset to add
+ * @shift: shift count to shift the result left
+ *
+ * These values are estimates at best, so no need for locking.
+ */
+void get_avenrun(unsigned long *loads, unsigned long offset, int shift)
{
- unsigned long i, running = 0, uninterruptible = 0;
+ loads[0] = (avenrun[0] + offset) << shift;
+ loads[1] = (avenrun[1] + offset) << shift;
+ loads[2] = (avenrun[2] + offset) << shift;
+}
- for_each_online_cpu(i) {
- running += cpu_rq(i)->nr_running;
- uninterruptible += cpu_rq(i)->nr_uninterruptible;
- }
+static unsigned long
+calc_load(unsigned long load, unsigned long exp, unsigned long active)
+{
+ load *= exp;
+ load += active * (FIXED_1 - exp);
+ return load >> FSHIFT;
+}
- if (unlikely((long)uninterruptible < 0))
- uninterruptible = 0;
+/*
+ * calc_load - update the avenrun load estimates 10 ticks after the
+ * CPUs have updated calc_load_tasks.
+ */
+void calc_global_load(void)
+{
+ unsigned long upd = calc_load_update + 10;
+ long active;
+
+ if (time_before(jiffies, upd))
+ return;
+
+ active = atomic_long_read(&calc_load_tasks);
+ active = active > 0 ? active * FIXED_1 : 0;
- return running + uninterruptible;
+ avenrun[0] = calc_load(avenrun[0], EXP_1, active);
+ avenrun[1] = calc_load(avenrun[1], EXP_5, active);
+ avenrun[2] = calc_load(avenrun[2], EXP_15, active);
+
+ calc_load_update += LOAD_FREQ;
+}
+
+/*
+ * Either called from update_cpu_load() or from a cpu going idle
+ */
+static void calc_load_account_active(struct rq *this_rq)
+{
+ long nr_active, delta;
+
+ nr_active = this_rq->nr_running;
+ nr_active += (long) this_rq->nr_uninterruptible;
+
+ if (nr_active != this_rq->calc_load_active) {
+ delta = nr_active - this_rq->calc_load_active;
+ this_rq->calc_load_active = nr_active;
+ atomic_long_add(delta, &calc_load_tasks);
+ }
}
/*
new_load += scale-1;
this_rq->cpu_load[i] = (old_load*(scale-1) + new_load) >> i;
}
+
+ if (time_after_eq(jiffies, this_rq->calc_load_update)) {
+ this_rq->calc_load_update += LOAD_FREQ;
+ calc_load_account_active(this_rq);
+ }
}
#ifdef CONFIG_SMP
static struct {
atomic_t load_balancer;
cpumask_var_t cpu_mask;
+ cpumask_var_t ilb_grp_nohz_mask;
} nohz ____cacheline_aligned = {
.load_balancer = ATOMIC_INIT(-1),
};
+#if defined(CONFIG_SCHED_MC) || defined(CONFIG_SCHED_SMT)
+/**
+ * lowest_flag_domain - Return lowest sched_domain containing flag.
+ * @cpu: The cpu whose lowest level of sched domain is to
+ * be returned.
+ * @flag: The flag to check for the lowest sched_domain
+ * for the given cpu.
+ *
+ * Returns the lowest sched_domain of a cpu which contains the given flag.
+ */
+static inline struct sched_domain *lowest_flag_domain(int cpu, int flag)
+{
+ struct sched_domain *sd;
+
+ for_each_domain(cpu, sd)
+ if (sd && (sd->flags & flag))
+ break;
+
+ return sd;
+}
+
+/**
+ * for_each_flag_domain - Iterates over sched_domains containing the flag.
+ * @cpu: The cpu whose domains we're iterating over.
+ * @sd: variable holding the value of the power_savings_sd
+ * for cpu.
+ * @flag: The flag to filter the sched_domains to be iterated.
+ *
+ * Iterates over all the scheduler domains for a given cpu that has the 'flag'
+ * set, starting from the lowest sched_domain to the highest.
+ */
+#define for_each_flag_domain(cpu, sd, flag) \
+ for (sd = lowest_flag_domain(cpu, flag); \
+ (sd && (sd->flags & flag)); sd = sd->parent)
+
+/**
+ * is_semi_idle_group - Checks if the given sched_group is semi-idle.
+ * @ilb_group: group to be checked for semi-idleness
+ *
+ * Returns: 1 if the group is semi-idle. 0 otherwise.
+ *
+ * We define a sched_group to be semi idle if it has atleast one idle-CPU
+ * and atleast one non-idle CPU. This helper function checks if the given
+ * sched_group is semi-idle or not.
+ */
+static inline int is_semi_idle_group(struct sched_group *ilb_group)
+{
+ cpumask_and(nohz.ilb_grp_nohz_mask, nohz.cpu_mask,
+ sched_group_cpus(ilb_group));
+
+ /*
+ * A sched_group is semi-idle when it has atleast one busy cpu
+ * and atleast one idle cpu.
+ */
+ if (cpumask_empty(nohz.ilb_grp_nohz_mask))
+ return 0;
+
+ if (cpumask_equal(nohz.ilb_grp_nohz_mask, sched_group_cpus(ilb_group)))
+ return 0;
+
+ return 1;
+}
+/**
+ * find_new_ilb - Finds the optimum idle load balancer for nomination.
+ * @cpu: The cpu which is nominating a new idle_load_balancer.
+ *
+ * Returns: Returns the id of the idle load balancer if it exists,
+ * Else, returns >= nr_cpu_ids.
+ *
+ * This algorithm picks the idle load balancer such that it belongs to a
+ * semi-idle powersavings sched_domain. The idea is to try and avoid
+ * completely idle packages/cores just for the purpose of idle load balancing
+ * when there are other idle cpu's which are better suited for that job.
+ */
+static int find_new_ilb(int cpu)
+{
+ struct sched_domain *sd;
+ struct sched_group *ilb_group;
+
+ /*
+ * Have idle load balancer selection from semi-idle packages only
+ * when power-aware load balancing is enabled
+ */
+ if (!(sched_smt_power_savings || sched_mc_power_savings))
+ goto out_done;
+
+ /*
+ * Optimize for the case when we have no idle CPUs or only one
+ * idle CPU. Don't walk the sched_domain hierarchy in such cases
+ */
+ if (cpumask_weight(nohz.cpu_mask) < 2)
+ goto out_done;
+
+ for_each_flag_domain(cpu, sd, SD_POWERSAVINGS_BALANCE) {
+ ilb_group = sd->groups;
+
+ do {
+ if (is_semi_idle_group(ilb_group))
+ return cpumask_first(nohz.ilb_grp_nohz_mask);
+
+ ilb_group = ilb_group->next;
+
+ } while (ilb_group != sd->groups);
+ }
+
+out_done:
+ return cpumask_first(nohz.cpu_mask);
+}
+#else /* (CONFIG_SCHED_MC || CONFIG_SCHED_SMT) */
+static inline int find_new_ilb(int call_cpu)
+{
+ return cpumask_first(nohz.cpu_mask);
+}
+#endif
+
/*
* This routine will try to nominate the ilb (idle load balancing)
* owner among the cpus whose ticks are stopped. ilb owner will do the idle
/* make me the ilb owner */
if (atomic_cmpxchg(&nohz.load_balancer, -1, cpu) == -1)
return 1;
- } else if (atomic_read(&nohz.load_balancer) == cpu)
+ } else if (atomic_read(&nohz.load_balancer) == cpu) {
+ int new_ilb;
+
+ if (!(sched_smt_power_savings ||
+ sched_mc_power_savings))
+ return 1;
+ /*
+ * Check to see if there is a more power-efficient
+ * ilb.
+ */
+ new_ilb = find_new_ilb(cpu);
+ if (new_ilb < nr_cpu_ids && new_ilb != cpu) {
+ atomic_set(&nohz.load_balancer, -1);
+ resched_cpu(new_ilb);
+ return 0;
+ }
return 1;
+ }
} else {
if (!cpumask_test_cpu(cpu, nohz.cpu_mask))
return 0;
}
if (atomic_read(&nohz.load_balancer) == -1) {
- /*
- * simple selection for now: Nominate the
- * first cpu in the nohz list to be the next
- * ilb owner.
- *
- * TBD: Traverse the sched domains and nominate
- * the nearest cpu in the nohz.cpu_mask.
- */
- int ilb = cpumask_first(nohz.cpu_mask);
+ int ilb = find_new_ilb(cpu);
if (ilb < nr_cpu_ids)
resched_cpu(ilb);
/*
* schedule() is the main scheduler function.
*/
-asmlinkage void __sched __schedule(void)
+asmlinkage void __sched schedule(void)
{
struct task_struct *prev, *next;
unsigned long *switch_count;
struct rq *rq;
int cpu;
+need_resched:
+ preempt_disable();
cpu = smp_processor_id();
rq = cpu_rq(cpu);
rcu_qsctr_inc(cpu);
if (unlikely(reacquire_kernel_lock(current) < 0))
goto need_resched_nonpreemptible;
-}
-asmlinkage void __sched schedule(void)
-{
-need_resched:
- preempt_disable();
- __schedule();
preempt_enable_no_resched();
- if (unlikely(test_thread_flag(TIF_NEED_RESCHED)))
+ if (need_resched())
goto need_resched;
}
EXPORT_SYMBOL(schedule);
* started to run but is not in state TASK_RUNNING. try_to_wake_up() returns
* zero in this (rare) case, and we handle it by continuing to scan the queue.
*/
-void __wake_up_common(wait_queue_head_t *q, unsigned int mode,
+static void __wake_up_common(wait_queue_head_t *q, unsigned int mode,
int nr_exclusive, int sync, void *key)
{
wait_queue_t *curr, *next;
* @mode: which threads
* @nr_exclusive: how many wake-one or wake-many threads to wake up
* @key: is directly passed to the wakeup function
+ *
+ * It may be assumed that this function implies a write memory barrier before
+ * changing the task state if and only if any tasks are woken up.
*/
void __wake_up(wait_queue_head_t *q, unsigned int mode,
int nr_exclusive, void *key)
* with each other. This can prevent needless bouncing between CPUs.
*
* On UP it can prevent extra preemption.
+ *
+ * It may be assumed that this function implies a write memory barrier before
+ * changing the task state if and only if any tasks are woken up.
*/
void __wake_up_sync_key(wait_queue_head_t *q, unsigned int mode,
int nr_exclusive, void *key)
* awakened in the same order in which they were queued.
*
* See also complete_all(), wait_for_completion() and related routines.
+ *
+ * It may be assumed that this function implies a write memory barrier before
+ * changing the task state if and only if any tasks are woken up.
*/
void complete(struct completion *x)
{
* @x: holds the state of this particular completion
*
* This will wake up all threads waiting on this particular completion event.
+ *
+ * It may be assumed that this function implies a write memory barrier before
+ * changing the task state if and only if any tasks are woken up.
*/
void complete_all(struct completion *x)
{
#ifdef CONFIG_DEBUG_STACK_USAGE
free = stack_not_used(p);
#endif
- printk(KERN_CONT "%5lu %5d %6d\n", free,
- task_pid_nr(p), task_pid_nr(p->real_parent));
+ printk(KERN_CONT "%5lu %5d %6d 0x%08lx\n", free,
+ task_pid_nr(p), task_pid_nr(p->real_parent),
+ (unsigned long)task_thread_info(p)->flags);
show_stack(p, NULL);
}
}
}
+
+/*
+ * remove the tasks which were accounted by rq from calc_load_tasks.
+ */
+static void calc_global_load_remove(struct rq *rq)
+{
+ atomic_long_sub(rq->calc_load_active, &calc_load_tasks);
+}
#endif /* CONFIG_HOTPLUG_CPU */
#if defined(CONFIG_SCHED_DEBUG) && defined(CONFIG_SYSCTL)
/* Update our root-domain */
rq = cpu_rq(cpu);
spin_lock_irqsave(&rq->lock, flags);
+ rq->calc_load_update = calc_load_update;
+ rq->calc_load_active = 0;
if (rq->rd) {
BUG_ON(!cpumask_test_cpu(cpu, rq->rd->span));
cpuset_unlock();
migrate_nr_uninterruptible(rq);
BUG_ON(rq->nr_running != 0);
-
+ calc_global_load_remove(rq);
/*
* No need to migrate the tasks: it was best-effort if
* they didn't take sched_hotcpu_mutex. Just wake up
/*
* The cpus mask in sched_group and sched_domain hangs off the end.
- * FIXME: use cpumask_var_t or dynamic percpu alloc to avoid wasting space
- * for nr_cpu_ids < CONFIG_NR_CPUS.
+ *
+ * ( See the the comments in include/linux/sched.h:struct sched_group
+ * and struct sched_domain. )
*/
struct static_sched_group {
struct sched_group sg;
struct sched_domain *sd;
sd = &per_cpu(phys_domains, j).sd;
- if (j != cpumask_first(sched_group_cpus(sd->groups))) {
+ if (j != group_first_cpu(sd->groups)) {
/*
* Only add "power" once for each
* physical package.
WARN_ON(!sd || !sd->groups);
- if (cpu != cpumask_first(sched_group_cpus(sd->groups)))
+ if (cpu != group_first_cpu(sd->groups))
return;
child = sd->child;
rq = cpu_rq(i);
spin_lock_init(&rq->lock);
rq->nr_running = 0;
+ rq->calc_load_active = 0;
+ rq->calc_load_update = jiffies + LOAD_FREQ;
init_cfs_rq(&rq->cfs, rq);
init_rt_rq(&rq->rt, rq);
#ifdef CONFIG_FAIR_GROUP_SCHED
* when this runqueue becomes "idle".
*/
init_idle(current, smp_processor_id());
+
+ calc_load_update = jiffies + LOAD_FREQ;
+
/*
* During early bootup we pretend to be a normal task:
*/
#ifdef CONFIG_SMP
#ifdef CONFIG_NO_HZ
alloc_bootmem_cpumask_var(&nohz.cpu_mask);
+ alloc_bootmem_cpumask_var(&nohz.ilb_grp_nohz_mask);
#endif
alloc_bootmem_cpumask_var(&cpu_isolated_map);
#endif /* SMP */
if (sysctl_sched_rt_period <= 0)
return -EINVAL;
+ /*
+ * There's always some RT tasks in the root group
+ * -- migration, kstopmachine etc..
+ */
+ if (sysctl_sched_rt_runtime == 0)
+ return -EBUSY;
+
spin_lock_irqsave(&def_rt_bandwidth.rt_runtime_lock, flags);
for_each_possible_cpu(i) {
struct rt_rq *rt_rq = &cpu_rq(i)->rt;
vec->count = 0;
if (bootmem)
alloc_bootmem_cpumask_var(&vec->mask);
- else if (!alloc_cpumask_var(&vec->mask, GFP_KERNEL))
+ else if (!zalloc_cpumask_var(&vec->mask, GFP_KERNEL))
goto cleanup;
}
find_matching_se(&se, &pse);
- while (se) {
- BUG_ON(!pse);
+ BUG_ON(!pse);
- if (wakeup_preempt_entity(se, pse) == 1) {
- resched_task(curr);
- break;
- }
-
- se = parent_entity(se);
- pse = parent_entity(pse);
- }
+ if (wakeup_preempt_entity(se, pse) == 1)
+ resched_task(curr);
}
static struct task_struct *pick_next_task_fair(struct rq *rq)
static struct task_struct *pick_next_task_idle(struct rq *rq)
{
schedstat_inc(rq, sched_goidle);
-
+ /* adjust the active tasks as we might go into a long sleep */
+ calc_load_account_active(rq);
return rq->idle;
}
unsigned int i;
for_each_possible_cpu(i)
- alloc_cpumask_var_node(&per_cpu(local_cpu_mask, i),
+ zalloc_cpumask_var_node(&per_cpu(local_cpu_mask, i),
GFP_KERNEL, cpu_to_node(i));
}
#endif /* CONFIG_SMP */
switch (action) {
case CPU_UP_PREPARE:
case CPU_UP_PREPARE_FROZEN:
- if (!alloc_cpumask_var_node(&cfd->cpumask, GFP_KERNEL,
+ if (!zalloc_cpumask_var_node(&cfd->cpumask, GFP_KERNEL,
cpu_to_node(cpu)))
return NOTIFY_BAD;
break;
return 0;
}
-int __weak arch_init_chip_data(struct irq_desc *desc, int cpu)
+int __weak arch_init_chip_data(struct irq_desc *desc, int node)
{
return 0;
}
.mode = 0444,
.proc_handler = &proc_dointvec,
},
+ {
+ .ctl_name = CTL_UNNUMBERED,
+ .procname = "bootloader_version",
+ .data = &bootloader_version,
+ .maxlen = sizeof (int),
+ .mode = 0444,
+ .proc_handler = &proc_dointvec,
+ },
{
.ctl_name = CTL_UNNUMBERED,
.procname = "kstack_depth_to_print",
/*
* This read-write spinlock protects us from races in SMP while
- * playing with xtime and avenrun.
+ * playing with xtime.
*/
__cacheline_aligned_in_smp DEFINE_SEQLOCK(xtime_lock);
run_posix_cpu_timers(p);
}
-/*
- * Nr of active tasks - counted in fixed-point numbers
- */
-static unsigned long count_active_tasks(void)
-{
- return nr_active() * FIXED_1;
-}
-
-/*
- * Hmm.. Changed this, as the GNU make sources (load.c) seems to
- * imply that avenrun[] is the standard name for this kind of thing.
- * Nothing else seems to be standardized: the fractional size etc
- * all seem to differ on different machines.
- *
- * Requires xtime_lock to access.
- */
-unsigned long avenrun[3];
-
-EXPORT_SYMBOL(avenrun);
-
-/*
- * calc_load - given tick count, update the avenrun load estimates.
- * This is called while holding a write_lock on xtime_lock.
- */
-static inline void calc_load(unsigned long ticks)
-{
- unsigned long active_tasks; /* fixed-point */
- static int count = LOAD_FREQ;
-
- count -= ticks;
- if (unlikely(count < 0)) {
- active_tasks = count_active_tasks();
- do {
- CALC_LOAD(avenrun[0], EXP_1, active_tasks);
- CALC_LOAD(avenrun[1], EXP_5, active_tasks);
- CALC_LOAD(avenrun[2], EXP_15, active_tasks);
- count += LOAD_FREQ;
- } while (count < 0);
- }
-}
-
/*
* This function runs timers and the timer-tq in bottom half context.
*/
softlockup_tick();
}
-/*
- * Called by the timer interrupt. xtime_lock must already be taken
- * by the timer IRQ!
- */
-static inline void update_times(unsigned long ticks)
-{
- update_wall_time();
- calc_load(ticks);
-}
-
/*
* The 64-bit jiffies value is not atomic - you MUST NOT read it
* without sampling the sequence number in xtime_lock.
void do_timer(unsigned long ticks)
{
jiffies_64 += ticks;
- update_times(ticks);
+ update_wall_time();
+ calc_global_load();
}
#ifdef __ARCH_WANT_SYS_ALARM
{
unsigned long mem_total, sav_total;
unsigned int mem_unit, bitcount;
- unsigned long seq;
+ struct timespec tp;
memset(info, 0, sizeof(struct sysinfo));
- do {
- struct timespec tp;
- seq = read_seqbegin(&xtime_lock);
-
- /*
- * This is annoying. The below is the same thing
- * posix_get_clock_monotonic() does, but it wants to
- * take the lock which we want to cover the loads stuff
- * too.
- */
-
- getnstimeofday(&tp);
- tp.tv_sec += wall_to_monotonic.tv_sec;
- tp.tv_nsec += wall_to_monotonic.tv_nsec;
- monotonic_to_bootbased(&tp);
- if (tp.tv_nsec - NSEC_PER_SEC >= 0) {
- tp.tv_nsec = tp.tv_nsec - NSEC_PER_SEC;
- tp.tv_sec++;
- }
- info->uptime = tp.tv_sec + (tp.tv_nsec ? 1 : 0);
+ ktime_get_ts(&tp);
+ monotonic_to_bootbased(&tp);
+ info->uptime = tp.tv_sec + (tp.tv_nsec ? 1 : 0);
- info->loads[0] = avenrun[0] << (SI_LOAD_SHIFT - FSHIFT);
- info->loads[1] = avenrun[1] << (SI_LOAD_SHIFT - FSHIFT);
- info->loads[2] = avenrun[2] << (SI_LOAD_SHIFT - FSHIFT);
+ get_avenrun(info->loads, 0, SI_LOAD_SHIFT - FSHIFT);
- info->procs = nr_threads;
- } while (read_seqretry(&xtime_lock, seq));
+ info->procs = nr_threads;
si_meminfo(info);
si_swapinfo(info);
if (!list_empty(&wait->task_list))
list_del_init(&wait->task_list);
else if (waitqueue_active(q))
- __wake_up_common(q, mode, 1, 0, key);
+ __wake_up_locked_key(q, mode, key);
spin_unlock_irqrestore(&q->lock, flags);
}
EXPORT_SYMBOL(abort_exclusive_wait);
}
EXPORT_SYMBOL(alloc_cpumask_var_node);
+bool zalloc_cpumask_var_node(cpumask_var_t *mask, gfp_t flags, int node)
+{
+ return alloc_cpumask_var_node(mask, flags | __GFP_ZERO, node);
+}
+EXPORT_SYMBOL(zalloc_cpumask_var_node);
+
/**
* alloc_cpumask_var - allocate a struct cpumask
* @mask: pointer to cpumask_var_t where the cpumask is returned
}
EXPORT_SYMBOL(alloc_cpumask_var);
+bool zalloc_cpumask_var(cpumask_var_t *mask, gfp_t flags)
+{
+ return alloc_cpumask_var(mask, flags | __GFP_ZERO);
+}
+EXPORT_SYMBOL(zalloc_cpumask_var);
+
/**
* alloc_bootmem_cpumask_var - allocate a struct cpumask from the bootmem arena.
* @mask: pointer to cpumask_var_t where the cpumask is returned
mapping->nrpages--;
__dec_zone_page_state(page, NR_FILE_PAGES);
BUG_ON(page_mapped(page));
- mem_cgroup_uncharge_cache_page(page);
/*
* Some filesystems seem to re-dirty the page even after
spin_lock_irq(&mapping->tree_lock);
__remove_from_page_cache(page);
spin_unlock_irq(&mapping->tree_lock);
+ mem_cgroup_uncharge_cache_page(page);
}
static int sync_page(void *word)
if (likely(!error)) {
mapping->nrpages++;
__inc_zone_page_state(page, NR_FILE_PAGES);
+ spin_unlock_irq(&mapping->tree_lock);
} else {
page->mapping = NULL;
+ spin_unlock_irq(&mapping->tree_lock);
mem_cgroup_uncharge_cache_page(page);
page_cache_release(page);
}
-
- spin_unlock_irq(&mapping->tree_lock);
radix_tree_preload_end();
} else
mem_cgroup_uncharge_cache_page(page);
static struct resv_map *vma_resv_map(struct vm_area_struct *vma)
{
VM_BUG_ON(!is_vm_hugetlb_page(vma));
- if (!(vma->vm_flags & VM_SHARED))
+ if (!(vma->vm_flags & VM_MAYSHARE))
return (struct resv_map *)(get_vma_private_data(vma) &
~HPAGE_RESV_MASK);
return NULL;
static void set_vma_resv_map(struct vm_area_struct *vma, struct resv_map *map)
{
VM_BUG_ON(!is_vm_hugetlb_page(vma));
- VM_BUG_ON(vma->vm_flags & VM_SHARED);
+ VM_BUG_ON(vma->vm_flags & VM_MAYSHARE);
set_vma_private_data(vma, (get_vma_private_data(vma) &
HPAGE_RESV_MASK) | (unsigned long)map);
static void set_vma_resv_flags(struct vm_area_struct *vma, unsigned long flags)
{
VM_BUG_ON(!is_vm_hugetlb_page(vma));
- VM_BUG_ON(vma->vm_flags & VM_SHARED);
+ VM_BUG_ON(vma->vm_flags & VM_MAYSHARE);
set_vma_private_data(vma, get_vma_private_data(vma) | flags);
}
if (vma->vm_flags & VM_NORESERVE)
return;
- if (vma->vm_flags & VM_SHARED) {
+ if (vma->vm_flags & VM_MAYSHARE) {
/* Shared mappings always use reserves */
h->resv_huge_pages--;
} else if (is_vma_resv_set(vma, HPAGE_RESV_OWNER)) {
void reset_vma_resv_huge_pages(struct vm_area_struct *vma)
{
VM_BUG_ON(!is_vm_hugetlb_page(vma));
- if (!(vma->vm_flags & VM_SHARED))
+ if (!(vma->vm_flags & VM_MAYSHARE))
vma->vm_private_data = (void *)0;
}
/* Returns true if the VMA has associated reserve pages */
static int vma_has_reserves(struct vm_area_struct *vma)
{
- if (vma->vm_flags & VM_SHARED)
+ if (vma->vm_flags & VM_MAYSHARE)
return 1;
if (is_vma_resv_set(vma, HPAGE_RESV_OWNER))
return 1;
struct address_space *mapping = vma->vm_file->f_mapping;
struct inode *inode = mapping->host;
- if (vma->vm_flags & VM_SHARED) {
+ if (vma->vm_flags & VM_MAYSHARE) {
pgoff_t idx = vma_hugecache_offset(h, vma, addr);
return region_chg(&inode->i_mapping->private_list,
idx, idx + 1);
struct address_space *mapping = vma->vm_file->f_mapping;
struct inode *inode = mapping->host;
- if (vma->vm_flags & VM_SHARED) {
+ if (vma->vm_flags & VM_MAYSHARE) {
pgoff_t idx = vma_hugecache_offset(h, vma, addr);
region_add(&inode->i_mapping->private_list, idx, idx + 1);
* at the time of fork() could consume its reserves on COW instead
* of the full address range.
*/
- if (!(vma->vm_flags & VM_SHARED) &&
+ if (!(vma->vm_flags & VM_MAYSHARE) &&
is_vma_resv_set(vma, HPAGE_RESV_OWNER) &&
old_page != pagecache_page)
outside_reserve = 1;
clear_huge_page(page, address, huge_page_size(h));
__SetPageUptodate(page);
- if (vma->vm_flags & VM_SHARED) {
+ if (vma->vm_flags & VM_MAYSHARE) {
int err;
struct inode *inode = mapping->host;
goto out_mutex;
}
- if (!(vma->vm_flags & VM_SHARED))
+ if (!(vma->vm_flags & VM_MAYSHARE))
pagecache_page = hugetlbfs_pagecache_page(h,
vma, address);
}
* to reserve the full area even if read-only as mprotect() may be
* called to make the mapping read-write. Assume !vma is a shm mapping
*/
- if (!vma || vma->vm_flags & VM_SHARED)
+ if (!vma || vma->vm_flags & VM_MAYSHARE)
chg = region_chg(&inode->i_mapping->private_list, from, to);
else {
struct resv_map *resv_map = resv_map_alloc();
* consumed reservations are stored in the map. Hence, nothing
* else has to be done for private mappings here
*/
- if (!vma || vma->vm_flags & VM_SHARED)
+ if (!vma || vma->vm_flags & VM_MAYSHARE)
region_add(&inode->i_mapping->private_list, from, to);
return 0;
}
return mem;
}
-static bool mem_cgroup_is_obsolete(struct mem_cgroup *mem)
-{
- if (!mem)
- return true;
- return css_is_removed(&mem->css);
-}
-
-
/*
* Call callback function against all cgroup under hierarchy tree.
*/
if (unlikely(!mem))
return 0;
- VM_BUG_ON(!mem || mem_cgroup_is_obsolete(mem));
+ VM_BUG_ON(css_is_removed(&mem->css));
while (1) {
int ret;
__mem_cgroup_uncharge_common(page, MEM_CGROUP_CHARGE_TYPE_CACHE);
}
+#ifdef CONFIG_SWAP
/*
- * called from __delete_from_swap_cache() and drop "page" account.
+ * called after __delete_from_swap_cache() and drop "page" account.
* memcg information is recorded to swap_cgroup of "ent"
*/
void mem_cgroup_uncharge_swapcache(struct page *page, swp_entry_t ent)
if (memcg)
css_put(&memcg->css);
}
+#endif
#ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP
/*
printk(KERN_INFO "[ pid ] uid tgid total_vm rss cpu oom_adj "
"name\n");
do_each_thread(g, p) {
- /*
- * total_vm and rss sizes do not exist for tasks with a
- * detached mm so there's no need to report them.
- */
- if (!p->mm)
- continue;
+ struct mm_struct *mm;
+
if (mem && !task_in_mem_cgroup(p, mem))
continue;
if (!thread_group_leader(p))
continue;
task_lock(p);
+ mm = p->mm;
+ if (!mm) {
+ /*
+ * total_vm and rss sizes do not exist for tasks with no
+ * mm so there's no need to report them; they can't be
+ * oom killed anyway.
+ */
+ task_unlock(p);
+ continue;
+ }
printk(KERN_INFO "[%5d] %5d %5d %8lu %8lu %3d %3d %s\n",
- p->pid, __task_cred(p)->uid, p->tgid,
- p->mm->total_vm, get_mm_rss(p->mm), (int)task_cpu(p),
- p->oomkilladj, p->comm);
+ p->pid, __task_cred(p)->uid, p->tgid, mm->total_vm,
+ get_mm_rss(mm), (int)task_cpu(p), p->oomkilladj,
+ p->comm);
task_unlock(p);
} while_each_thread(g, p);
}
static int __meminitdata nr_nodemap_entries;
static unsigned long __meminitdata arch_zone_lowest_possible_pfn[MAX_NR_ZONES];
static unsigned long __meminitdata arch_zone_highest_possible_pfn[MAX_NR_ZONES];
-#ifdef CONFIG_MEMORY_HOTPLUG_RESERVE
- static unsigned long __meminitdata node_boundary_start_pfn[MAX_NUMNODES];
- static unsigned long __meminitdata node_boundary_end_pfn[MAX_NUMNODES];
-#endif /* CONFIG_MEMORY_HOTPLUG_RESERVE */
static unsigned long __initdata required_kernelcore;
static unsigned long __initdata required_movablecore;
static unsigned long __meminitdata zone_movable_pfn[MAX_NUMNODES];
early_node_map[i].end_pfn);
}
-/**
- * push_node_boundaries - Push node boundaries to at least the requested boundary
- * @nid: The nid of the node to push the boundary for
- * @start_pfn: The start pfn of the node
- * @end_pfn: The end pfn of the node
- *
- * In reserve-based hot-add, mem_map is allocated that is unused until hotadd
- * time. Specifically, on x86_64, SRAT will report ranges that can potentially
- * be hotplugged even though no physical memory exists. This function allows
- * an arch to push out the node boundaries so mem_map is allocated that can
- * be used later.
- */
-#ifdef CONFIG_MEMORY_HOTPLUG_RESERVE
-void __init push_node_boundaries(unsigned int nid,
- unsigned long start_pfn, unsigned long end_pfn)
-{
- mminit_dprintk(MMINIT_TRACE, "zoneboundary",
- "Entering push_node_boundaries(%u, %lu, %lu)\n",
- nid, start_pfn, end_pfn);
-
- /* Initialise the boundary for this node if necessary */
- if (node_boundary_end_pfn[nid] == 0)
- node_boundary_start_pfn[nid] = -1UL;
-
- /* Update the boundaries */
- if (node_boundary_start_pfn[nid] > start_pfn)
- node_boundary_start_pfn[nid] = start_pfn;
- if (node_boundary_end_pfn[nid] < end_pfn)
- node_boundary_end_pfn[nid] = end_pfn;
-}
-
-/* If necessary, push the node boundary out for reserve hotadd */
-static void __meminit account_node_boundary(unsigned int nid,
- unsigned long *start_pfn, unsigned long *end_pfn)
-{
- mminit_dprintk(MMINIT_TRACE, "zoneboundary",
- "Entering account_node_boundary(%u, %lu, %lu)\n",
- nid, *start_pfn, *end_pfn);
-
- /* Return if boundary information has not been provided */
- if (node_boundary_end_pfn[nid] == 0)
- return;
-
- /* Check the boundaries and update if necessary */
- if (node_boundary_start_pfn[nid] < *start_pfn)
- *start_pfn = node_boundary_start_pfn[nid];
- if (node_boundary_end_pfn[nid] > *end_pfn)
- *end_pfn = node_boundary_end_pfn[nid];
-}
-#else
-void __init push_node_boundaries(unsigned int nid,
- unsigned long start_pfn, unsigned long end_pfn) {}
-
-static void __meminit account_node_boundary(unsigned int nid,
- unsigned long *start_pfn, unsigned long *end_pfn) {}
-#endif
-
-
/**
* get_pfn_range_for_nid - Return the start and end page frames for a node
* @nid: The nid to return the range for. If MAX_NUMNODES, the min and max PFN are returned.
if (*start_pfn == -1UL)
*start_pfn = 0;
-
- /* Push the node boundaries out if requested */
- account_node_boundary(nid, start_pfn, end_pfn);
}
/*
{
memset(early_node_map, 0, sizeof(early_node_map));
nr_nodemap_entries = 0;
-#ifdef CONFIG_MEMORY_HOTPLUG_RESERVE
- memset(node_boundary_start_pfn, 0, sizeof(node_boundary_start_pfn));
- memset(node_boundary_end_pfn, 0, sizeof(node_boundary_end_pfn));
-#endif /* CONFIG_MEMORY_HOTPLUG_RESERVE */
}
/* Compare two active node_active_regions */
*/
void __delete_from_swap_cache(struct page *page)
{
- swp_entry_t ent = {.val = page_private(page)};
-
VM_BUG_ON(!PageLocked(page));
VM_BUG_ON(!PageSwapCache(page));
VM_BUG_ON(PageWriteback(page));
total_swapcache_pages--;
__dec_zone_page_state(page, NR_FILE_PAGES);
INC_CACHE_INFO(del_total);
- mem_cgroup_uncharge_swapcache(page, ent);
}
/**
__delete_from_swap_cache(page);
spin_unlock_irq(&swapper_space.tree_lock);
+ mem_cgroup_uncharge_swapcache(page, entry);
swap_free(entry);
page_cache_release(page);
}
BUG_ON(page_has_private(page));
__remove_from_page_cache(page);
spin_unlock_irq(&mapping->tree_lock);
+ mem_cgroup_uncharge_cache_page(page);
page_cache_release(page); /* pagecache ref */
return 1;
failed:
swp_entry_t swap = { .val = page_private(page) };
__delete_from_swap_cache(page);
spin_unlock_irq(&mapping->tree_lock);
+ mem_cgroup_uncharge_swapcache(page, swap);
swap_free(swap);
} else {
__remove_from_page_cache(page);
spin_unlock_irq(&mapping->tree_lock);
+ mem_cgroup_uncharge_cache_page(page);
}
return 1;
struct hci_conn *conn = container_of(work, struct hci_conn, work_add);
struct hci_dev *hdev = conn->hdev;
- /* ensure previous del is complete */
- flush_work(&conn->work_del);
-
dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle);
if (device_add(&conn->dev) < 0) {
struct hci_conn *conn = container_of(work, struct hci_conn, work_del);
struct hci_dev *hdev = conn->hdev;
- /* ensure previous add is complete */
- flush_work(&conn->work_add);
-
if (!device_is_registered(&conn->dev))
return;
#include <linux/netfilter/nfnetlink_conntrack.h>
#include <net/netfilter/nf_conntrack.h>
#include <net/netfilter/nf_conntrack_l4proto.h>
+#include <net/netfilter/nf_conntrack_ecache.h>
#include <net/netfilter/nf_log.h>
static DEFINE_RWLOCK(dccp_lock);
ct->proto.dccp.state = new_state;
write_unlock_bh(&dccp_lock);
+ if (new_state != old_state)
+ nf_conntrack_event_cache(IPCT_PROTOINFO, ct);
+
dn = dccp_pernet(net);
nf_ct_refresh_acct(ct, ctinfo, skb, dn->dccp_timeout[new_state]);
sender->td_end = end;
sender->flags |= IP_CT_TCP_FLAG_DATA_UNACKNOWLEDGED;
}
+ if (tcph->ack) {
+ if (!(sender->flags & IP_CT_TCP_FLAG_MAXACK_SET)) {
+ sender->td_maxack = ack;
+ sender->flags |= IP_CT_TCP_FLAG_MAXACK_SET;
+ } else if (after(ack, sender->td_maxack))
+ sender->td_maxack = ack;
+ }
+
/*
* Update receiver data.
*/
"nf_ct_tcp: invalid state ");
return -NF_ACCEPT;
case TCP_CONNTRACK_CLOSE:
+ if (index == TCP_RST_SET
+ && (ct->proto.tcp.seen[!dir].flags & IP_CT_TCP_FLAG_MAXACK_SET)
+ && before(ntohl(th->seq), ct->proto.tcp.seen[!dir].td_maxack)) {
+ /* Invalid RST */
+ write_unlock_bh(&tcp_lock);
+ if (LOG_INVALID(net, IPPROTO_TCP))
+ nf_log_packet(pf, 0, skb, NULL, NULL, NULL,
+ "nf_ct_tcp: invalid RST ");
+ return -NF_ACCEPT;
+ }
if (index == TCP_RST_SET
&& ((test_bit(IPS_SEEN_REPLY_BIT, &ct->status)
&& ct->proto.tcp.last_index == TCP_SYN_SET)
+ nla_total_size(sizeof(struct nfulnl_msg_packet_hw))
+ nla_total_size(sizeof(struct nfulnl_msg_packet_timestamp));
+ if (in && skb_mac_header_was_set(skb)) {
+ size += nla_total_size(skb->dev->hard_header_len)
+ + nla_total_size(sizeof(u_int16_t)) /* hwtype */
+ + nla_total_size(sizeof(u_int16_t)); /* hwlen */
+ }
+
spin_lock_bh(&inst->lock);
if (inst->flags & NFULNL_CFG_F_SEQ)
if (!hlist_empty(&htable->hash[*bucket])) {
hlist_for_each_entry(ent, pos, &htable->hash[*bucket], node)
if (dl_seq_real_show(ent, htable->family, s))
- return 1;
+ return -1;
}
return 0;
}
unsigned long cl;
unsigned long fh;
int err;
+ int tp_created = 0;
if (net != &init_net)
return -EINVAL;
goto errout;
}
- spin_lock_bh(root_lock);
- tp->next = *back;
- *back = tp;
- spin_unlock_bh(root_lock);
+ tp_created = 1;
} else if (tca[TCA_KIND] && nla_strcmp(tca[TCA_KIND], tp->ops->kind))
goto errout;
switch (n->nlmsg_type) {
case RTM_NEWTFILTER:
err = -EEXIST;
- if (n->nlmsg_flags & NLM_F_EXCL)
+ if (n->nlmsg_flags & NLM_F_EXCL) {
+ if (tp_created)
+ tcf_destroy(tp);
goto errout;
+ }
break;
case RTM_DELTFILTER:
err = tp->ops->delete(tp, fh);
}
err = tp->ops->change(tp, cl, t->tcm_handle, tca, &fh);
- if (err == 0)
+ if (err == 0) {
+ if (tp_created) {
+ spin_lock_bh(root_lock);
+ tp->next = *back;
+ *back = tp;
+ spin_unlock_bh(root_lock);
+ }
tfilter_notify(skb, n, tp, fh, RTM_NEWTFILTER);
+ } else {
+ if (tp_created)
+ tcf_destroy(tp);
+ }
errout:
if (cl)
struct tcf_result *res)
{
struct cls_cgroup_head *head = tp->root;
- struct cgroup_cls_state *cs;
- int ret = 0;
+ u32 classid;
/*
* Due to the nature of the classifier it is required to ignore all
return -1;
rcu_read_lock();
- cs = task_cls_state(current);
- if (cs->classid && tcf_em_tree_match(skb, &head->ematches, NULL)) {
- res->classid = cs->classid;
- res->class = 0;
- ret = tcf_exts_exec(skb, &head->exts, res);
- } else
- ret = -1;
-
+ classid = task_cls_state(current)->classid;
rcu_read_unlock();
- return ret;
+ if (!classid)
+ return -1;
+
+ if (!tcf_em_tree_match(skb, &head->ematches, NULL))
+ return -1;
+
+ res->classid = classid;
+ res->class = 0;
+ return tcf_exts_exec(skb, &head->exts, res);
}
static unsigned long cls_cgroup_get(struct tcf_proto *tp, u32 handle)
struct tcf_exts e;
int err;
+ if (!tca[TCA_OPTIONS])
+ return -EINVAL;
+
if (head == NULL) {
if (!handle)
return -EINVAL;
lock_sock(sock->sk);
sock->sk->sk_sndbuf = snd * 2;
sock->sk->sk_rcvbuf = rcv * 2;
+ sock->sk->sk_userlocks |= SOCK_SNDBUF_LOCK|SOCK_RCVBUF_LOCK;
release_sock(sock->sk);
#endif
}
test_bit(XPT_CONN, &svsk->sk_xprt.xpt_flags),
test_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags));
+ if (test_and_clear_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags))
+ /* sndbuf needs to have room for one request
+ * per thread, otherwise we can stall even when the
+ * network isn't a bottleneck.
+ *
+ * We count all threads rather than threads in a
+ * particular pool, which provides an upper bound
+ * on the number of threads which will access the socket.
+ *
+ * rcvbuf just needs to be able to hold a few requests.
+ * Normally they will be removed from the queue
+ * as soon a a complete request arrives.
+ */
+ svc_sock_setbufsize(svsk->sk_sock,
+ (serv->sv_nrthreads+3) * serv->sv_max_mesg,
+ 3 * serv->sv_max_mesg);
+
clear_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
/* Receive data. If we haven't got the record length yet, get
tcp_sk(sk)->nonagle |= TCP_NAGLE_OFF;
+ /* initialise setting must have enough space to
+ * receive and respond to one request.
+ * svc_tcp_recvfrom will re-adjust if necessary
+ */
+ svc_sock_setbufsize(svsk->sk_sock,
+ 3 * svsk->sk_xprt.xpt_server->sv_max_mesg,
+ 3 * svsk->sk_xprt.xpt_server->sv_max_mesg);
+
+ set_bit(XPT_CHNGBUF, &svsk->sk_xprt.xpt_flags);
set_bit(XPT_DATA, &svsk->sk_xprt.xpt_flags);
if (sk->sk_state != TCP_ESTABLISHED)
set_bit(XPT_CLOSE, &svsk->sk_xprt.xpt_flags);
/* Initialize the socket */
if (sock->type == SOCK_DGRAM)
svc_udp_init(svsk, serv);
- else {
- /* initialise setting must have enough space to
- * receive and respond to one request.
- */
- svc_sock_setbufsize(svsk->sk_sock, 4 * serv->sv_max_mesg,
- 4 * serv->sv_max_mesg);
+ else
svc_tcp_init(svsk, serv);
- }
dprintk("svc: svc_setup_socket created %p (inet %p)\n",
svsk, svsk->sk_sk);
page_bytes -= sge_bytes;
frmr->page_list->page_list[page_no] =
- ib_dma_map_page(xprt->sc_cm_id->device, page, 0,
+ ib_dma_map_single(xprt->sc_cm_id->device,
+ page_address(page),
PAGE_SIZE, DMA_TO_DEVICE);
if (ib_dma_mapping_error(xprt->sc_cm_id->device,
frmr->page_list->page_list[page_no]))
clear_bit(RDMACTXT_F_FAST_UNREG, &ctxt->flags);
/* Prepare the SGE for the RPCRDMA Header */
+ ctxt->sge[0].lkey = rdma->sc_dma_lkey;
+ ctxt->sge[0].length = svc_rdma_xdr_get_reply_hdr_len(rdma_resp);
ctxt->sge[0].addr =
- ib_dma_map_page(rdma->sc_cm_id->device,
- page, 0, PAGE_SIZE, DMA_TO_DEVICE);
+ ib_dma_map_single(rdma->sc_cm_id->device, page_address(page),
+ ctxt->sge[0].length, DMA_TO_DEVICE);
if (ib_dma_mapping_error(rdma->sc_cm_id->device, ctxt->sge[0].addr))
goto err;
atomic_inc(&rdma->sc_dma_used);
ctxt->direction = DMA_TO_DEVICE;
- ctxt->sge[0].length = svc_rdma_xdr_get_reply_hdr_len(rdma_resp);
- ctxt->sge[0].lkey = rdma->sc_dma_lkey;
-
/* Determine how many of our SGE are to be transmitted */
for (sge_no = 1; byte_count && sge_no < vec->count; sge_no++) {
sge_bytes = min_t(size_t, vec->sge[sge_no].iov_len, byte_count);
BUG_ON(sge_no >= xprt->sc_max_sge);
page = svc_rdma_get_page();
ctxt->pages[sge_no] = page;
- pa = ib_dma_map_page(xprt->sc_cm_id->device,
- page, 0, PAGE_SIZE,
+ pa = ib_dma_map_single(xprt->sc_cm_id->device,
+ page_address(page), PAGE_SIZE,
DMA_FROM_DEVICE);
if (ib_dma_mapping_error(xprt->sc_cm_id->device, pa))
goto err_put_ctxt;
length = svc_rdma_xdr_encode_error(xprt, rmsgp, err, va);
/* Prepare SGE for local address */
- sge.addr = ib_dma_map_page(xprt->sc_cm_id->device,
- p, 0, PAGE_SIZE, DMA_FROM_DEVICE);
+ sge.addr = ib_dma_map_single(xprt->sc_cm_id->device,
+ page_address(p), PAGE_SIZE, DMA_FROM_DEVICE);
if (ib_dma_mapping_error(xprt->sc_cm_id->device, sge.addr)) {
put_page(p);
return;
if (ret) {
dprintk("svcrdma: Error %d posting send for protocol error\n",
ret);
- ib_dma_unmap_page(xprt->sc_cm_id->device,
+ ib_dma_unmap_single(xprt->sc_cm_id->device,
sge.addr, PAGE_SIZE,
DMA_FROM_DEVICE);
svc_rdma_put_context(ctxt, 1);
# ---------------------------------------------------------------------------
quiet_cmd_gzip = GZIP $@
-cmd_gzip = gzip -f -9 < $< > $@
+cmd_gzip = (cat $(filter-out FORCE,$^) | gzip -f -9 > $@) || \
+ (rm -f $@ ; false)
# Bzip2
# ---------------------------------------------------------------------------
-# Bzip2 does not include size in file... so we have to fake that
-size_append=$(CONFIG_SHELL) $(srctree)/scripts/bin_size
-
-quiet_cmd_bzip2 = BZIP2 $@
-cmd_bzip2 = (bzip2 -9 < $< && $(size_append) $<) > $@ || (rm -f $@ ; false)
+# Bzip2 and LZMA do not include size in file... so we have to fake that;
+# append the size as a 32-bit littleendian number as gzip does.
+size_append = echo -ne $(shell \
+dec_size=0; \
+for F in $1; do \
+ fsize=$$(stat -c "%s" $$F); \
+ dec_size=$$(expr $$dec_size + $$fsize); \
+done; \
+printf "%08x" $$dec_size | \
+ sed 's/\(..\)\(..\)\(..\)\(..\)/\\\\x\4\\\\x\3\\\\x\2\\\\x\1/g' \
+)
+
+quiet_cmd_bzip2 = BZIP2 $@
+cmd_bzip2 = (cat $(filter-out FORCE,$^) | \
+ bzip2 -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ (rm -f $@ ; false)
# Lzma
# ---------------------------------------------------------------------------
quiet_cmd_lzma = LZMA $@
-cmd_lzma = (lzma -9 -c $< && $(size_append) $<) >$@ || (rm -f $@ ; false)
+cmd_lzma = (cat $(filter-out FORCE,$^) | \
+ lzma -9 && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ (rm -f $@ ; false)
+++ /dev/null
-#!/bin/sh
-
-if [ $# = 0 ] ; then
- echo Usage: $0 file
-fi
-
-size_dec=`stat -c "%s" $1`
-size_hex_echo_string=`printf "%08x" $size_dec |
- sed 's/\(..\)\(..\)\(..\)\(..\)/\\\\x\4\\\\x\3\\\\x\2\\\\x\1/g'`
-/bin/echo -ne $size_hex_echo_string
static int tomoyo_bprm_set_creds(struct linux_binprm *bprm)
{
+ int rc;
+
+ rc = cap_bprm_set_creds(bprm);
+ if (rc)
+ return rc;
+
/*
* Do only if this function is called for the first time of an execve
* operation.
new_hw_ptr = hw_base + pos;
}
}
+
+ /* Do jiffies check only in xrun_debug mode */
+ if (!xrun_debug(substream))
+ goto no_jiffies_check;
+
/* Skip the jiffies check for hardwares with BATCH flag.
* Such hardware usually just increases the position at each IRQ,
* thus it can't give any strange position.
hw_base = 0;
new_hw_ptr = hw_base + pos;
}
- if (((delta * HZ) / runtime->rate) > jdelta + HZ/100) {
+ /* Do jiffies check only in xrun_debug mode */
+ if (xrun_debug(substream) &&
+ ((delta * HZ) / runtime->rate) > jdelta + HZ/100) {
hw_ptr_error(substream,
"hw_ptr skipping! "
"(pos=%ld, delta=%ld, period=%ld, jdelta=%lu/%lu)\n",
runtime->status->hw_ptr %= runtime->buffer_size;
else
runtime->status->hw_ptr = 0;
- runtime->hw_ptr_jiffies = jiffies;
snd_pcm_stream_unlock_irqrestore(substream, flags);
return 0;
}
{
struct snd_pcm_runtime *runtime = substream->runtime;
snd_pcm_trigger_tstamp(substream);
+ runtime->hw_ptr_jiffies = jiffies;
runtime->status->state = state;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
runtime->silence_size > 0)
{
if (substream->runtime->trigger_master != substream)
return 0;
+ /* The jiffies check in snd_pcm_update_hw_ptr*() is done by
+ * a delta betwen the current jiffies, this gives a large enough
+ * delta, effectively to skip the check once.
+ */
+ substream->runtime->hw_ptr_jiffies = jiffies - HZ * 1000;
return substream->ops->trigger(substream,
push ? SNDRV_PCM_TRIGGER_PAUSE_PUSH :
SNDRV_PCM_TRIGGER_PAUSE_RELEASE);
static struct snd_pci_quirk cxt5051_cfg_tbl[] = {
SND_PCI_QUIRK(0x103c, 0x30cf, "HP DV6736", CXT5051_HP_DV6736),
+ SND_PCI_QUIRK(0x103c, 0x360b, "Compaq Presario CQ60", CXT5051_HP),
SND_PCI_QUIRK(0x14f1, 0x0101, "Conexant Reference board",
CXT5051_LAPTOP),
SND_PCI_QUIRK(0x14f1, 0x5051, "HP Spartan 1.1", CXT5051_HP),
[QUIRK_MIDI_YAMAHA] = snd_usb_create_midi_interface,
[QUIRK_MIDI_MIDIMAN] = snd_usb_create_midi_interface,
[QUIRK_MIDI_NOVATION] = snd_usb_create_midi_interface,
- [QUIRK_MIDI_RAW] = snd_usb_create_midi_interface,
+ [QUIRK_MIDI_FASTLANE] = snd_usb_create_midi_interface,
[QUIRK_MIDI_EMAGIC] = snd_usb_create_midi_interface,
[QUIRK_MIDI_CME] = snd_usb_create_midi_interface,
[QUIRK_AUDIO_STANDARD_INTERFACE] = create_standard_audio_quirk,
QUIRK_MIDI_YAMAHA,
QUIRK_MIDI_MIDIMAN,
QUIRK_MIDI_NOVATION,
- QUIRK_MIDI_RAW,
+ QUIRK_MIDI_FASTLANE,
QUIRK_MIDI_EMAGIC,
QUIRK_MIDI_CME,
QUIRK_MIDI_US122L,
umidi->usb_protocol_ops = &snd_usbmidi_novation_ops;
err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
break;
- case QUIRK_MIDI_RAW:
+ case QUIRK_MIDI_FASTLANE:
umidi->usb_protocol_ops = &snd_usbmidi_raw_ops;
+ /*
+ * Interface 1 contains isochronous endpoints, but with the same
+ * numbers as in interface 0. Since it is interface 1 that the
+ * USB core has most recently seen, these descriptors are now
+ * associated with the endpoint numbers. This will foul up our
+ * attempts to submit bulk/interrupt URBs to the endpoints in
+ * interface 0, so we have to make sure that the USB core looks
+ * again at interface 0 by calling usb_set_interface() on it.
+ */
+ usb_set_interface(umidi->chip->dev, 0, 0);
err = snd_usbmidi_detect_per_port_endpoints(umidi, endpoints);
break;
case QUIRK_MIDI_EMAGIC:
.data = & (const struct snd_usb_audio_quirk[]) {
{
.ifnum = 0,
- .type = QUIRK_MIDI_RAW
+ .type = QUIRK_MIDI_FASTLANE
},
{
.ifnum = 1,
bad_pfn = page_to_pfn(bad_page);
- if (!alloc_cpumask_var(&cpus_hardware_enabled, GFP_KERNEL)) {
+ if (!zalloc_cpumask_var(&cpus_hardware_enabled, GFP_KERNEL)) {
r = -ENOMEM;
goto out_free_0;
}
+ cpumask_clear(cpus_hardware_enabled);
r = kvm_arch_hardware_setup();
if (r < 0)
projects / linux-block.git / commitdiff