.. kernel-doc:: drivers/gpu/drm/drm_modes.c
:export:
+Connector Display Sink Abstraction
+==================================
+
+.. kernel-doc:: include/drm/drm_connector.h
+ :internal:
+
+.. kernel-doc:: drivers/gpu/drm/drm_connector.c
+ :export:
+
KMS Initialization and Cleanup
==============================
drm_trace_points.o drm_global.o drm_prime.o \
drm_rect.o drm_vma_manager.o drm_flip_work.o \
drm_modeset_lock.o drm_atomic.o drm_bridge.o \
- drm_framebuffer.o
+ drm_framebuffer.o drm_connector.o
drm-$(CONFIG_COMPAT) += drm_ioc32.o
drm-$(CONFIG_DRM_GEM_CMA_HELPER) += drm_gem_cma_helper.o
--- /dev/null
+/*
+ * Copyright (c) 2016 Intel Corporation
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission. The copyright holders make no representations
+ * about the suitability of this software for any purpose. It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#include <drm/drmP.h>
+#include <drm/drm_connector.h>
+#include <drm/drm_edid.h>
+
+#include "drm_crtc_internal.h"
+#include "drm_internal.h"
+
+struct drm_conn_prop_enum_list {
+ int type;
+ const char *name;
+ struct ida ida;
+};
+
+/*
+ * Connector and encoder types.
+ */
+static struct drm_conn_prop_enum_list drm_connector_enum_list[] = {
+ { DRM_MODE_CONNECTOR_Unknown, "Unknown" },
+ { DRM_MODE_CONNECTOR_VGA, "VGA" },
+ { DRM_MODE_CONNECTOR_DVII, "DVI-I" },
+ { DRM_MODE_CONNECTOR_DVID, "DVI-D" },
+ { DRM_MODE_CONNECTOR_DVIA, "DVI-A" },
+ { DRM_MODE_CONNECTOR_Composite, "Composite" },
+ { DRM_MODE_CONNECTOR_SVIDEO, "SVIDEO" },
+ { DRM_MODE_CONNECTOR_LVDS, "LVDS" },
+ { DRM_MODE_CONNECTOR_Component, "Component" },
+ { DRM_MODE_CONNECTOR_9PinDIN, "DIN" },
+ { DRM_MODE_CONNECTOR_DisplayPort, "DP" },
+ { DRM_MODE_CONNECTOR_HDMIA, "HDMI-A" },
+ { DRM_MODE_CONNECTOR_HDMIB, "HDMI-B" },
+ { DRM_MODE_CONNECTOR_TV, "TV" },
+ { DRM_MODE_CONNECTOR_eDP, "eDP" },
+ { DRM_MODE_CONNECTOR_VIRTUAL, "Virtual" },
+ { DRM_MODE_CONNECTOR_DSI, "DSI" },
+ { DRM_MODE_CONNECTOR_DPI, "DPI" },
+};
+
+void drm_connector_ida_init(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(drm_connector_enum_list); i++)
+ ida_init(&drm_connector_enum_list[i].ida);
+}
+
+void drm_connector_ida_destroy(void)
+{
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(drm_connector_enum_list); i++)
+ ida_destroy(&drm_connector_enum_list[i].ida);
+}
+
+/**
+ * drm_connector_get_cmdline_mode - reads the user's cmdline mode
+ * @connector: connector to quwery
+ *
+ * The kernel supports per-connector configration of its consoles through
+ * use of the video= parameter. This function parses that option and
+ * extracts the user's specified mode (or enable/disable status) for a
+ * particular connector. This is typically only used during the early fbdev
+ * setup.
+ */
+static void drm_connector_get_cmdline_mode(struct drm_connector *connector)
+{
+ struct drm_cmdline_mode *mode = &connector->cmdline_mode;
+ char *option = NULL;
+
+ if (fb_get_options(connector->name, &option))
+ return;
+
+ if (!drm_mode_parse_command_line_for_connector(option,
+ connector,
+ mode))
+ return;
+
+ if (mode->force) {
+ const char *s;
+
+ switch (mode->force) {
+ case DRM_FORCE_OFF:
+ s = "OFF";
+ break;
+ case DRM_FORCE_ON_DIGITAL:
+ s = "ON - dig";
+ break;
+ default:
+ case DRM_FORCE_ON:
+ s = "ON";
+ break;
+ }
+
+ DRM_INFO("forcing %s connector %s\n", connector->name, s);
+ connector->force = mode->force;
+ }
+
+ DRM_DEBUG_KMS("cmdline mode for connector %s %dx%d@%dHz%s%s%s\n",
+ connector->name,
+ mode->xres, mode->yres,
+ mode->refresh_specified ? mode->refresh : 60,
+ mode->rb ? " reduced blanking" : "",
+ mode->margins ? " with margins" : "",
+ mode->interlace ? " interlaced" : "");
+}
+
+static void drm_connector_free(struct kref *kref)
+{
+ struct drm_connector *connector =
+ container_of(kref, struct drm_connector, base.refcount);
+ struct drm_device *dev = connector->dev;
+
+ drm_mode_object_unregister(dev, &connector->base);
+ connector->funcs->destroy(connector);
+}
+
+/**
+ * drm_connector_init - Init a preallocated connector
+ * @dev: DRM device
+ * @connector: the connector to init
+ * @funcs: callbacks for this connector
+ * @connector_type: user visible type of the connector
+ *
+ * Initialises a preallocated connector. Connectors should be
+ * subclassed as part of driver connector objects.
+ *
+ * Returns:
+ * Zero on success, error code on failure.
+ */
+int drm_connector_init(struct drm_device *dev,
+ struct drm_connector *connector,
+ const struct drm_connector_funcs *funcs,
+ int connector_type)
+{
+ struct drm_mode_config *config = &dev->mode_config;
+ int ret;
+ struct ida *connector_ida =
+ &drm_connector_enum_list[connector_type].ida;
+
+ drm_modeset_lock_all(dev);
+
+ ret = drm_mode_object_get_reg(dev, &connector->base,
+ DRM_MODE_OBJECT_CONNECTOR,
+ false, drm_connector_free);
+ if (ret)
+ goto out_unlock;
+
+ connector->base.properties = &connector->properties;
+ connector->dev = dev;
+ connector->funcs = funcs;
+
+ ret = ida_simple_get(&config->connector_ida, 0, 0, GFP_KERNEL);
+ if (ret < 0)
+ goto out_put;
+ connector->index = ret;
+ ret = 0;
+
+ connector->connector_type = connector_type;
+ connector->connector_type_id =
+ ida_simple_get(connector_ida, 1, 0, GFP_KERNEL);
+ if (connector->connector_type_id < 0) {
+ ret = connector->connector_type_id;
+ goto out_put_id;
+ }
+ connector->name =
+ kasprintf(GFP_KERNEL, "%s-%d",
+ drm_connector_enum_list[connector_type].name,
+ connector->connector_type_id);
+ if (!connector->name) {
+ ret = -ENOMEM;
+ goto out_put_type_id;
+ }
+
+ INIT_LIST_HEAD(&connector->probed_modes);
+ INIT_LIST_HEAD(&connector->modes);
+ connector->edid_blob_ptr = NULL;
+ connector->status = connector_status_unknown;
+
+ drm_connector_get_cmdline_mode(connector);
+
+ /* We should add connectors at the end to avoid upsetting the connector
+ * index too much. */
+ list_add_tail(&connector->head, &config->connector_list);
+ config->num_connector++;
+
+ if (connector_type != DRM_MODE_CONNECTOR_VIRTUAL)
+ drm_object_attach_property(&connector->base,
+ config->edid_property,
+ 0);
+
+ drm_object_attach_property(&connector->base,
+ config->dpms_property, 0);
+
+ if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
+ drm_object_attach_property(&connector->base, config->prop_crtc_id, 0);
+ }
+
+ connector->debugfs_entry = NULL;
+out_put_type_id:
+ if (ret)
+ ida_remove(connector_ida, connector->connector_type_id);
+out_put_id:
+ if (ret)
+ ida_remove(&config->connector_ida, connector->index);
+out_put:
+ if (ret)
+ drm_mode_object_unregister(dev, &connector->base);
+
+out_unlock:
+ drm_modeset_unlock_all(dev);
+
+ return ret;
+}
+EXPORT_SYMBOL(drm_connector_init);
+
+/**
+ * drm_mode_connector_attach_encoder - attach a connector to an encoder
+ * @connector: connector to attach
+ * @encoder: encoder to attach @connector to
+ *
+ * This function links up a connector to an encoder. Note that the routing
+ * restrictions between encoders and crtcs are exposed to userspace through the
+ * possible_clones and possible_crtcs bitmasks.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_mode_connector_attach_encoder(struct drm_connector *connector,
+ struct drm_encoder *encoder)
+{
+ int i;
+
+ /*
+ * In the past, drivers have attempted to model the static association
+ * of connector to encoder in simple connector/encoder devices using a
+ * direct assignment of connector->encoder = encoder. This connection
+ * is a logical one and the responsibility of the core, so drivers are
+ * expected not to mess with this.
+ *
+ * Note that the error return should've been enough here, but a large
+ * majority of drivers ignores the return value, so add in a big WARN
+ * to get people's attention.
+ */
+ if (WARN_ON(connector->encoder))
+ return -EINVAL;
+
+ for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
+ if (connector->encoder_ids[i] == 0) {
+ connector->encoder_ids[i] = encoder->base.id;
+ return 0;
+ }
+ }
+ return -ENOMEM;
+}
+EXPORT_SYMBOL(drm_mode_connector_attach_encoder);
+
+static void drm_mode_remove(struct drm_connector *connector,
+ struct drm_display_mode *mode)
+{
+ list_del(&mode->head);
+ drm_mode_destroy(connector->dev, mode);
+}
+
+/**
+ * drm_connector_cleanup - cleans up an initialised connector
+ * @connector: connector to cleanup
+ *
+ * Cleans up the connector but doesn't free the object.
+ */
+void drm_connector_cleanup(struct drm_connector *connector)
+{
+ struct drm_device *dev = connector->dev;
+ struct drm_display_mode *mode, *t;
+
+ /* The connector should have been removed from userspace long before
+ * it is finally destroyed.
+ */
+ if (WARN_ON(connector->registered))
+ drm_connector_unregister(connector);
+
+ if (connector->tile_group) {
+ drm_mode_put_tile_group(dev, connector->tile_group);
+ connector->tile_group = NULL;
+ }
+
+ list_for_each_entry_safe(mode, t, &connector->probed_modes, head)
+ drm_mode_remove(connector, mode);
+
+ list_for_each_entry_safe(mode, t, &connector->modes, head)
+ drm_mode_remove(connector, mode);
+
+ ida_remove(&drm_connector_enum_list[connector->connector_type].ida,
+ connector->connector_type_id);
+
+ ida_remove(&dev->mode_config.connector_ida,
+ connector->index);
+
+ kfree(connector->display_info.bus_formats);
+ drm_mode_object_unregister(dev, &connector->base);
+ kfree(connector->name);
+ connector->name = NULL;
+ list_del(&connector->head);
+ dev->mode_config.num_connector--;
+
+ WARN_ON(connector->state && !connector->funcs->atomic_destroy_state);
+ if (connector->state && connector->funcs->atomic_destroy_state)
+ connector->funcs->atomic_destroy_state(connector,
+ connector->state);
+
+ memset(connector, 0, sizeof(*connector));
+}
+EXPORT_SYMBOL(drm_connector_cleanup);
+
+/**
+ * drm_connector_register - register a connector
+ * @connector: the connector to register
+ *
+ * Register userspace interfaces for a connector
+ *
+ * Returns:
+ * Zero on success, error code on failure.
+ */
+int drm_connector_register(struct drm_connector *connector)
+{
+ int ret;
+
+ if (connector->registered)
+ return 0;
+
+ ret = drm_sysfs_connector_add(connector);
+ if (ret)
+ return ret;
+
+ ret = drm_debugfs_connector_add(connector);
+ if (ret) {
+ goto err_sysfs;
+ }
+
+ if (connector->funcs->late_register) {
+ ret = connector->funcs->late_register(connector);
+ if (ret)
+ goto err_debugfs;
+ }
+
+ drm_mode_object_register(connector->dev, &connector->base);
+
+ connector->registered = true;
+ return 0;
+
+err_debugfs:
+ drm_debugfs_connector_remove(connector);
+err_sysfs:
+ drm_sysfs_connector_remove(connector);
+ return ret;
+}
+EXPORT_SYMBOL(drm_connector_register);
+
+/**
+ * drm_connector_unregister - unregister a connector
+ * @connector: the connector to unregister
+ *
+ * Unregister userspace interfaces for a connector
+ */
+void drm_connector_unregister(struct drm_connector *connector)
+{
+ if (!connector->registered)
+ return;
+
+ if (connector->funcs->early_unregister)
+ connector->funcs->early_unregister(connector);
+
+ drm_sysfs_connector_remove(connector);
+ drm_debugfs_connector_remove(connector);
+
+ connector->registered = false;
+}
+EXPORT_SYMBOL(drm_connector_unregister);
+
+void drm_connector_unregister_all(struct drm_device *dev)
+{
+ struct drm_connector *connector;
+
+ /* FIXME: taking the mode config mutex ends up in a clash with sysfs */
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head)
+ drm_connector_unregister(connector);
+}
+
+int drm_connector_register_all(struct drm_device *dev)
+{
+ struct drm_connector *connector;
+ int ret;
+
+ /* FIXME: taking the mode config mutex ends up in a clash with
+ * fbcon/backlight registration */
+ list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
+ ret = drm_connector_register(connector);
+ if (ret)
+ goto err;
+ }
+
+ return 0;
+
+err:
+ mutex_unlock(&dev->mode_config.mutex);
+ drm_connector_unregister_all(dev);
+ return ret;
+}
+
+/**
+ * drm_get_connector_status_name - return a string for connector status
+ * @status: connector status to compute name of
+ *
+ * In contrast to the other drm_get_*_name functions this one here returns a
+ * const pointer and hence is threadsafe.
+ */
+const char *drm_get_connector_status_name(enum drm_connector_status status)
+{
+ if (status == connector_status_connected)
+ return "connected";
+ else if (status == connector_status_disconnected)
+ return "disconnected";
+ else
+ return "unknown";
+}
+EXPORT_SYMBOL(drm_get_connector_status_name);
+
+static const struct drm_prop_enum_list drm_subpixel_enum_list[] = {
+ { SubPixelUnknown, "Unknown" },
+ { SubPixelHorizontalRGB, "Horizontal RGB" },
+ { SubPixelHorizontalBGR, "Horizontal BGR" },
+ { SubPixelVerticalRGB, "Vertical RGB" },
+ { SubPixelVerticalBGR, "Vertical BGR" },
+ { SubPixelNone, "None" },
+};
+
+/**
+ * drm_get_subpixel_order_name - return a string for a given subpixel enum
+ * @order: enum of subpixel_order
+ *
+ * Note you could abuse this and return something out of bounds, but that
+ * would be a caller error. No unscrubbed user data should make it here.
+ */
+const char *drm_get_subpixel_order_name(enum subpixel_order order)
+{
+ return drm_subpixel_enum_list[order].name;
+}
+EXPORT_SYMBOL(drm_get_subpixel_order_name);
+
+static const struct drm_prop_enum_list drm_dpms_enum_list[] = {
+ { DRM_MODE_DPMS_ON, "On" },
+ { DRM_MODE_DPMS_STANDBY, "Standby" },
+ { DRM_MODE_DPMS_SUSPEND, "Suspend" },
+ { DRM_MODE_DPMS_OFF, "Off" }
+};
+DRM_ENUM_NAME_FN(drm_get_dpms_name, drm_dpms_enum_list)
+
+/* Optional connector properties. */
+static const struct drm_prop_enum_list drm_scaling_mode_enum_list[] = {
+ { DRM_MODE_SCALE_NONE, "None" },
+ { DRM_MODE_SCALE_FULLSCREEN, "Full" },
+ { DRM_MODE_SCALE_CENTER, "Center" },
+ { DRM_MODE_SCALE_ASPECT, "Full aspect" },
+};
+
+static const struct drm_prop_enum_list drm_aspect_ratio_enum_list[] = {
+ { DRM_MODE_PICTURE_ASPECT_NONE, "Automatic" },
+ { DRM_MODE_PICTURE_ASPECT_4_3, "4:3" },
+ { DRM_MODE_PICTURE_ASPECT_16_9, "16:9" },
+};
+
+static const struct drm_prop_enum_list drm_dvi_i_select_enum_list[] = {
+ { DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
+ { DRM_MODE_SUBCONNECTOR_DVID, "DVI-D" }, /* DVI-I */
+ { DRM_MODE_SUBCONNECTOR_DVIA, "DVI-A" }, /* DVI-I */
+};
+DRM_ENUM_NAME_FN(drm_get_dvi_i_select_name, drm_dvi_i_select_enum_list)
+
+static const struct drm_prop_enum_list drm_dvi_i_subconnector_enum_list[] = {
+ { DRM_MODE_SUBCONNECTOR_Unknown, "Unknown" }, /* DVI-I and TV-out */
+ { DRM_MODE_SUBCONNECTOR_DVID, "DVI-D" }, /* DVI-I */
+ { DRM_MODE_SUBCONNECTOR_DVIA, "DVI-A" }, /* DVI-I */
+};
+DRM_ENUM_NAME_FN(drm_get_dvi_i_subconnector_name,
+ drm_dvi_i_subconnector_enum_list)
+
+static const struct drm_prop_enum_list drm_tv_select_enum_list[] = {
+ { DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
+ { DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
+ { DRM_MODE_SUBCONNECTOR_SVIDEO, "SVIDEO" }, /* TV-out */
+ { DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */
+ { DRM_MODE_SUBCONNECTOR_SCART, "SCART" }, /* TV-out */
+};
+DRM_ENUM_NAME_FN(drm_get_tv_select_name, drm_tv_select_enum_list)
+
+static const struct drm_prop_enum_list drm_tv_subconnector_enum_list[] = {
+ { DRM_MODE_SUBCONNECTOR_Unknown, "Unknown" }, /* DVI-I and TV-out */
+ { DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
+ { DRM_MODE_SUBCONNECTOR_SVIDEO, "SVIDEO" }, /* TV-out */
+ { DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */
+ { DRM_MODE_SUBCONNECTOR_SCART, "SCART" }, /* TV-out */
+};
+DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
+ drm_tv_subconnector_enum_list)
+
+int drm_connector_create_standard_properties(struct drm_device *dev)
+{
+ struct drm_property *prop;
+
+ prop = drm_property_create(dev, DRM_MODE_PROP_BLOB |
+ DRM_MODE_PROP_IMMUTABLE,
+ "EDID", 0);
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.edid_property = prop;
+
+ prop = drm_property_create_enum(dev, 0,
+ "DPMS", drm_dpms_enum_list,
+ ARRAY_SIZE(drm_dpms_enum_list));
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.dpms_property = prop;
+
+ prop = drm_property_create(dev,
+ DRM_MODE_PROP_BLOB |
+ DRM_MODE_PROP_IMMUTABLE,
+ "PATH", 0);
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.path_property = prop;
+
+ prop = drm_property_create(dev,
+ DRM_MODE_PROP_BLOB |
+ DRM_MODE_PROP_IMMUTABLE,
+ "TILE", 0);
+ if (!prop)
+ return -ENOMEM;
+ dev->mode_config.tile_property = prop;
+
+ return 0;
+}
+
+/**
+ * drm_mode_create_dvi_i_properties - create DVI-I specific connector properties
+ * @dev: DRM device
+ *
+ * Called by a driver the first time a DVI-I connector is made.
+ */
+int drm_mode_create_dvi_i_properties(struct drm_device *dev)
+{
+ struct drm_property *dvi_i_selector;
+ struct drm_property *dvi_i_subconnector;
+
+ if (dev->mode_config.dvi_i_select_subconnector_property)
+ return 0;
+
+ dvi_i_selector =
+ drm_property_create_enum(dev, 0,
+ "select subconnector",
+ drm_dvi_i_select_enum_list,
+ ARRAY_SIZE(drm_dvi_i_select_enum_list));
+ dev->mode_config.dvi_i_select_subconnector_property = dvi_i_selector;
+
+ dvi_i_subconnector = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
+ "subconnector",
+ drm_dvi_i_subconnector_enum_list,
+ ARRAY_SIZE(drm_dvi_i_subconnector_enum_list));
+ dev->mode_config.dvi_i_subconnector_property = dvi_i_subconnector;
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_dvi_i_properties);
+
+/**
+ * drm_create_tv_properties - create TV specific connector properties
+ * @dev: DRM device
+ * @num_modes: number of different TV formats (modes) supported
+ * @modes: array of pointers to strings containing name of each format
+ *
+ * Called by a driver's TV initialization routine, this function creates
+ * the TV specific connector properties for a given device. Caller is
+ * responsible for allocating a list of format names and passing them to
+ * this routine.
+ */
+int drm_mode_create_tv_properties(struct drm_device *dev,
+ unsigned int num_modes,
+ const char * const modes[])
+{
+ struct drm_property *tv_selector;
+ struct drm_property *tv_subconnector;
+ unsigned int i;
+
+ if (dev->mode_config.tv_select_subconnector_property)
+ return 0;
+
+ /*
+ * Basic connector properties
+ */
+ tv_selector = drm_property_create_enum(dev, 0,
+ "select subconnector",
+ drm_tv_select_enum_list,
+ ARRAY_SIZE(drm_tv_select_enum_list));
+ if (!tv_selector)
+ goto nomem;
+
+ dev->mode_config.tv_select_subconnector_property = tv_selector;
+
+ tv_subconnector =
+ drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
+ "subconnector",
+ drm_tv_subconnector_enum_list,
+ ARRAY_SIZE(drm_tv_subconnector_enum_list));
+ if (!tv_subconnector)
+ goto nomem;
+ dev->mode_config.tv_subconnector_property = tv_subconnector;
+
+ /*
+ * Other, TV specific properties: margins & TV modes.
+ */
+ dev->mode_config.tv_left_margin_property =
+ drm_property_create_range(dev, 0, "left margin", 0, 100);
+ if (!dev->mode_config.tv_left_margin_property)
+ goto nomem;
+
+ dev->mode_config.tv_right_margin_property =
+ drm_property_create_range(dev, 0, "right margin", 0, 100);
+ if (!dev->mode_config.tv_right_margin_property)
+ goto nomem;
+
+ dev->mode_config.tv_top_margin_property =
+ drm_property_create_range(dev, 0, "top margin", 0, 100);
+ if (!dev->mode_config.tv_top_margin_property)
+ goto nomem;
+
+ dev->mode_config.tv_bottom_margin_property =
+ drm_property_create_range(dev, 0, "bottom margin", 0, 100);
+ if (!dev->mode_config.tv_bottom_margin_property)
+ goto nomem;
+
+ dev->mode_config.tv_mode_property =
+ drm_property_create(dev, DRM_MODE_PROP_ENUM,
+ "mode", num_modes);
+ if (!dev->mode_config.tv_mode_property)
+ goto nomem;
+
+ for (i = 0; i < num_modes; i++)
+ drm_property_add_enum(dev->mode_config.tv_mode_property, i,
+ i, modes[i]);
+
+ dev->mode_config.tv_brightness_property =
+ drm_property_create_range(dev, 0, "brightness", 0, 100);
+ if (!dev->mode_config.tv_brightness_property)
+ goto nomem;
+
+ dev->mode_config.tv_contrast_property =
+ drm_property_create_range(dev, 0, "contrast", 0, 100);
+ if (!dev->mode_config.tv_contrast_property)
+ goto nomem;
+
+ dev->mode_config.tv_flicker_reduction_property =
+ drm_property_create_range(dev, 0, "flicker reduction", 0, 100);
+ if (!dev->mode_config.tv_flicker_reduction_property)
+ goto nomem;
+
+ dev->mode_config.tv_overscan_property =
+ drm_property_create_range(dev, 0, "overscan", 0, 100);
+ if (!dev->mode_config.tv_overscan_property)
+ goto nomem;
+
+ dev->mode_config.tv_saturation_property =
+ drm_property_create_range(dev, 0, "saturation", 0, 100);
+ if (!dev->mode_config.tv_saturation_property)
+ goto nomem;
+
+ dev->mode_config.tv_hue_property =
+ drm_property_create_range(dev, 0, "hue", 0, 100);
+ if (!dev->mode_config.tv_hue_property)
+ goto nomem;
+
+ return 0;
+nomem:
+ return -ENOMEM;
+}
+EXPORT_SYMBOL(drm_mode_create_tv_properties);
+
+/**
+ * drm_mode_create_scaling_mode_property - create scaling mode property
+ * @dev: DRM device
+ *
+ * Called by a driver the first time it's needed, must be attached to desired
+ * connectors.
+ */
+int drm_mode_create_scaling_mode_property(struct drm_device *dev)
+{
+ struct drm_property *scaling_mode;
+
+ if (dev->mode_config.scaling_mode_property)
+ return 0;
+
+ scaling_mode =
+ drm_property_create_enum(dev, 0, "scaling mode",
+ drm_scaling_mode_enum_list,
+ ARRAY_SIZE(drm_scaling_mode_enum_list));
+
+ dev->mode_config.scaling_mode_property = scaling_mode;
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_scaling_mode_property);
+
+/**
+ * drm_mode_create_aspect_ratio_property - create aspect ratio property
+ * @dev: DRM device
+ *
+ * Called by a driver the first time it's needed, must be attached to desired
+ * connectors.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_mode_create_aspect_ratio_property(struct drm_device *dev)
+{
+ if (dev->mode_config.aspect_ratio_property)
+ return 0;
+
+ dev->mode_config.aspect_ratio_property =
+ drm_property_create_enum(dev, 0, "aspect ratio",
+ drm_aspect_ratio_enum_list,
+ ARRAY_SIZE(drm_aspect_ratio_enum_list));
+
+ if (dev->mode_config.aspect_ratio_property == NULL)
+ return -ENOMEM;
+
+ return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_aspect_ratio_property);
+
+/**
+ * drm_mode_create_suggested_offset_properties - create suggests offset properties
+ * @dev: DRM device
+ *
+ * Create the the suggested x/y offset property for connectors.
+ */
+int drm_mode_create_suggested_offset_properties(struct drm_device *dev)
+{
+ if (dev->mode_config.suggested_x_property && dev->mode_config.suggested_y_property)
+ return 0;
+
+ dev->mode_config.suggested_x_property =
+ drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested X", 0, 0xffffffff);
+
+ dev->mode_config.suggested_y_property =
+ drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested Y", 0, 0xffffffff);
+
+ if (dev->mode_config.suggested_x_property == NULL ||
+ dev->mode_config.suggested_y_property == NULL)
+ return -ENOMEM;
+ return 0;
+}
+EXPORT_SYMBOL(drm_mode_create_suggested_offset_properties);
+
+/**
+ * drm_mode_connector_set_path_property - set tile property on connector
+ * @connector: connector to set property on.
+ * @path: path to use for property; must not be NULL.
+ *
+ * This creates a property to expose to userspace to specify a
+ * connector path. This is mainly used for DisplayPort MST where
+ * connectors have a topology and we want to allow userspace to give
+ * them more meaningful names.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_mode_connector_set_path_property(struct drm_connector *connector,
+ const char *path)
+{
+ struct drm_device *dev = connector->dev;
+ int ret;
+
+ ret = drm_property_replace_global_blob(dev,
+ &connector->path_blob_ptr,
+ strlen(path) + 1,
+ path,
+ &connector->base,
+ dev->mode_config.path_property);
+ return ret;
+}
+EXPORT_SYMBOL(drm_mode_connector_set_path_property);
+
+/**
+ * drm_mode_connector_set_tile_property - set tile property on connector
+ * @connector: connector to set property on.
+ *
+ * This looks up the tile information for a connector, and creates a
+ * property for userspace to parse if it exists. The property is of
+ * the form of 8 integers using ':' as a separator.
+ *
+ * Returns:
+ * Zero on success, errno on failure.
+ */
+int drm_mode_connector_set_tile_property(struct drm_connector *connector)
+{
+ struct drm_device *dev = connector->dev;
+ char tile[256];
+ int ret;
+
+ if (!connector->has_tile) {
+ ret = drm_property_replace_global_blob(dev,
+ &connector->tile_blob_ptr,
+ 0,
+ NULL,
+ &connector->base,
+ dev->mode_config.tile_property);
+ return ret;
+ }
+
+ snprintf(tile, 256, "%d:%d:%d:%d:%d:%d:%d:%d",
+ connector->tile_group->id, connector->tile_is_single_monitor,
+ connector->num_h_tile, connector->num_v_tile,
+ connector->tile_h_loc, connector->tile_v_loc,
+ connector->tile_h_size, connector->tile_v_size);
+
+ ret = drm_property_replace_global_blob(dev,
+ &connector->tile_blob_ptr,
+ strlen(tile) + 1,
+ tile,
+ &connector->base,
+ dev->mode_config.tile_property);
+ return ret;
+}
+EXPORT_SYMBOL(drm_mode_connector_set_tile_property);
+
+/**
+ * drm_mode_connector_update_edid_property - update the edid property of a connector
+ * @connector: drm connector
+ * @edid: new value of the edid property
+ *
+ * This function creates a new blob modeset object and assigns its id to the
+ * connector's edid property.
+ *
+ * Returns:
+ * Zero on success, negative errno on failure.
+ */
+int drm_mode_connector_update_edid_property(struct drm_connector *connector,
+ const struct edid *edid)
+{
+ struct drm_device *dev = connector->dev;
+ size_t size = 0;
+ int ret;
+
+ /* ignore requests to set edid when overridden */
+ if (connector->override_edid)
+ return 0;
+
+ if (edid)
+ size = EDID_LENGTH * (1 + edid->extensions);
+
+ ret = drm_property_replace_global_blob(dev,
+ &connector->edid_blob_ptr,
+ size,
+ edid,
+ &connector->base,
+ dev->mode_config.edid_property);
+ return ret;
+}
+EXPORT_SYMBOL(drm_mode_connector_update_edid_property);
+
+int drm_mode_connector_set_obj_prop(struct drm_mode_object *obj,
+ struct drm_property *property,
+ uint64_t value)
+{
+ int ret = -EINVAL;
+ struct drm_connector *connector = obj_to_connector(obj);
+
+ /* Do DPMS ourselves */
+ if (property == connector->dev->mode_config.dpms_property) {
+ ret = (*connector->funcs->dpms)(connector, (int)value);
+ } else if (connector->funcs->set_property)
+ ret = connector->funcs->set_property(connector, property, value);
+
+ /* store the property value if successful */
+ if (!ret)
+ drm_object_property_set_value(&connector->base, property, value);
+ return ret;
+}
+
+int drm_mode_connector_property_set_ioctl(struct drm_device *dev,
+ void *data, struct drm_file *file_priv)
+{
+ struct drm_mode_connector_set_property *conn_set_prop = data;
+ struct drm_mode_obj_set_property obj_set_prop = {
+ .value = conn_set_prop->value,
+ .prop_id = conn_set_prop->prop_id,
+ .obj_id = conn_set_prop->connector_id,
+ .obj_type = DRM_MODE_OBJECT_CONNECTOR
+ };
+
+ /* It does all the locking and checking we need */
+ return drm_mode_obj_set_property_ioctl(dev, &obj_set_prop, file_priv);
+}
+
+static struct drm_encoder *drm_connector_get_encoder(struct drm_connector *connector)
+{
+ /* For atomic drivers only state objects are synchronously updated and
+ * protected by modeset locks, so check those first. */
+ if (connector->state)
+ return connector->state->best_encoder;
+ return connector->encoder;
+}
+
+static bool drm_mode_expose_to_userspace(const struct drm_display_mode *mode,
+ const struct drm_file *file_priv)
+{
+ /*
+ * If user-space hasn't configured the driver to expose the stereo 3D
+ * modes, don't expose them.
+ */
+ if (!file_priv->stereo_allowed && drm_mode_is_stereo(mode))
+ return false;
+
+ return true;
+}
+
+int drm_mode_getconnector(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ struct drm_mode_get_connector *out_resp = data;
+ struct drm_connector *connector;
+ struct drm_encoder *encoder;
+ struct drm_display_mode *mode;
+ int mode_count = 0;
+ int encoders_count = 0;
+ int ret = 0;
+ int copied = 0;
+ int i;
+ struct drm_mode_modeinfo u_mode;
+ struct drm_mode_modeinfo __user *mode_ptr;
+ uint32_t __user *encoder_ptr;
+
+ if (!drm_core_check_feature(dev, DRIVER_MODESET))
+ return -EINVAL;
+
+ memset(&u_mode, 0, sizeof(struct drm_mode_modeinfo));
+
+ mutex_lock(&dev->mode_config.mutex);
+
+ connector = drm_connector_lookup(dev, out_resp->connector_id);
+ if (!connector) {
+ ret = -ENOENT;
+ goto out_unlock;
+ }
+
+ for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++)
+ if (connector->encoder_ids[i] != 0)
+ encoders_count++;
+
+ if (out_resp->count_modes == 0) {
+ connector->funcs->fill_modes(connector,
+ dev->mode_config.max_width,
+ dev->mode_config.max_height);
+ }
+
+ /* delayed so we get modes regardless of pre-fill_modes state */
+ list_for_each_entry(mode, &connector->modes, head)
+ if (drm_mode_expose_to_userspace(mode, file_priv))
+ mode_count++;
+
+ out_resp->connector_id = connector->base.id;
+ out_resp->connector_type = connector->connector_type;
+ out_resp->connector_type_id = connector->connector_type_id;
+ out_resp->mm_width = connector->display_info.width_mm;
+ out_resp->mm_height = connector->display_info.height_mm;
+ out_resp->subpixel = connector->display_info.subpixel_order;
+ out_resp->connection = connector->status;
+
+ drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
+ encoder = drm_connector_get_encoder(connector);
+ if (encoder)
+ out_resp->encoder_id = encoder->base.id;
+ else
+ out_resp->encoder_id = 0;
+
+ /*
+ * This ioctl is called twice, once to determine how much space is
+ * needed, and the 2nd time to fill it.
+ */
+ if ((out_resp->count_modes >= mode_count) && mode_count) {
+ copied = 0;
+ mode_ptr = (struct drm_mode_modeinfo __user *)(unsigned long)out_resp->modes_ptr;
+ list_for_each_entry(mode, &connector->modes, head) {
+ if (!drm_mode_expose_to_userspace(mode, file_priv))
+ continue;
+
+ drm_mode_convert_to_umode(&u_mode, mode);
+ if (copy_to_user(mode_ptr + copied,
+ &u_mode, sizeof(u_mode))) {
+ ret = -EFAULT;
+ goto out;
+ }
+ copied++;
+ }
+ }
+ out_resp->count_modes = mode_count;
+
+ ret = drm_mode_object_get_properties(&connector->base, file_priv->atomic,
+ (uint32_t __user *)(unsigned long)(out_resp->props_ptr),
+ (uint64_t __user *)(unsigned long)(out_resp->prop_values_ptr),
+ &out_resp->count_props);
+ if (ret)
+ goto out;
+
+ if ((out_resp->count_encoders >= encoders_count) && encoders_count) {
+ copied = 0;
+ encoder_ptr = (uint32_t __user *)(unsigned long)(out_resp->encoders_ptr);
+ for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
+ if (connector->encoder_ids[i] != 0) {
+ if (put_user(connector->encoder_ids[i],
+ encoder_ptr + copied)) {
+ ret = -EFAULT;
+ goto out;
+ }
+ copied++;
+ }
+ }
+ }
+ out_resp->count_encoders = encoders_count;
+
+out:
+ drm_modeset_unlock(&dev->mode_config.connection_mutex);
+
+ drm_connector_unreference(connector);
+out_unlock:
+ mutex_unlock(&dev->mode_config.mutex);
+
+ return ret;
+}
+
#include "drm_crtc_internal.h"
#include "drm_internal.h"
-/* Avoid boilerplate. I'm tired of typing. */
-#define DRM_ENUM_NAME_FN(fnname, list) \
- const char *fnname(int val) \
- { \
- int i; \
- for (i = 0; i < ARRAY_SIZE(list); i++) { \
- if (list[i].type == val) \
- return list[i].name; \
- } \
- return "(unknown)"; \
- }
-
/*
* Global properties
*/
-static const struct drm_prop_enum_list drm_dpms_enum_list[] = {
- { DRM_MODE_DPMS_ON, "On" },
- { DRM_MODE_DPMS_STANDBY, "Standby" },
- { DRM_MODE_DPMS_SUSPEND, "Suspend" },
- { DRM_MODE_DPMS_OFF, "Off" }
-};
-
-DRM_ENUM_NAME_FN(drm_get_dpms_name, drm_dpms_enum_list)
-
static const struct drm_prop_enum_list drm_plane_type_enum_list[] = {
{ DRM_PLANE_TYPE_OVERLAY, "Overlay" },
{ DRM_PLANE_TYPE_PRIMARY, "Primary" },
{ DRM_PLANE_TYPE_CURSOR, "Cursor" },
};
-/*
- * Optional properties
- */
-static const struct drm_prop_enum_list drm_scaling_mode_enum_list[] = {
- { DRM_MODE_SCALE_NONE, "None" },
- { DRM_MODE_SCALE_FULLSCREEN, "Full" },
- { DRM_MODE_SCALE_CENTER, "Center" },
- { DRM_MODE_SCALE_ASPECT, "Full aspect" },
-};
-
-static const struct drm_prop_enum_list drm_aspect_ratio_enum_list[] = {
- { DRM_MODE_PICTURE_ASPECT_NONE, "Automatic" },
- { DRM_MODE_PICTURE_ASPECT_4_3, "4:3" },
- { DRM_MODE_PICTURE_ASPECT_16_9, "16:9" },
-};
-
-/*
- * Non-global properties, but "required" for certain connectors.
- */
-static const struct drm_prop_enum_list drm_dvi_i_select_enum_list[] = {
- { DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
- { DRM_MODE_SUBCONNECTOR_DVID, "DVI-D" }, /* DVI-I */
- { DRM_MODE_SUBCONNECTOR_DVIA, "DVI-A" }, /* DVI-I */
-};
-
-DRM_ENUM_NAME_FN(drm_get_dvi_i_select_name, drm_dvi_i_select_enum_list)
-
-static const struct drm_prop_enum_list drm_dvi_i_subconnector_enum_list[] = {
- { DRM_MODE_SUBCONNECTOR_Unknown, "Unknown" }, /* DVI-I and TV-out */
- { DRM_MODE_SUBCONNECTOR_DVID, "DVI-D" }, /* DVI-I */
- { DRM_MODE_SUBCONNECTOR_DVIA, "DVI-A" }, /* DVI-I */
-};
-
-DRM_ENUM_NAME_FN(drm_get_dvi_i_subconnector_name,
- drm_dvi_i_subconnector_enum_list)
-
-static const struct drm_prop_enum_list drm_tv_select_enum_list[] = {
- { DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */
- { DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
- { DRM_MODE_SUBCONNECTOR_SVIDEO, "SVIDEO" }, /* TV-out */
- { DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */
- { DRM_MODE_SUBCONNECTOR_SCART, "SCART" }, /* TV-out */
-};
-
-DRM_ENUM_NAME_FN(drm_get_tv_select_name, drm_tv_select_enum_list)
-
-static const struct drm_prop_enum_list drm_tv_subconnector_enum_list[] = {
- { DRM_MODE_SUBCONNECTOR_Unknown, "Unknown" }, /* DVI-I and TV-out */
- { DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */
- { DRM_MODE_SUBCONNECTOR_SVIDEO, "SVIDEO" }, /* TV-out */
- { DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */
- { DRM_MODE_SUBCONNECTOR_SCART, "SCART" }, /* TV-out */
-};
-
-DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name,
- drm_tv_subconnector_enum_list)
-
-struct drm_conn_prop_enum_list {
- int type;
- const char *name;
- struct ida ida;
-};
-
-/*
- * Connector and encoder types.
- */
-static struct drm_conn_prop_enum_list drm_connector_enum_list[] = {
- { DRM_MODE_CONNECTOR_Unknown, "Unknown" },
- { DRM_MODE_CONNECTOR_VGA, "VGA" },
- { DRM_MODE_CONNECTOR_DVII, "DVI-I" },
- { DRM_MODE_CONNECTOR_DVID, "DVI-D" },
- { DRM_MODE_CONNECTOR_DVIA, "DVI-A" },
- { DRM_MODE_CONNECTOR_Composite, "Composite" },
- { DRM_MODE_CONNECTOR_SVIDEO, "SVIDEO" },
- { DRM_MODE_CONNECTOR_LVDS, "LVDS" },
- { DRM_MODE_CONNECTOR_Component, "Component" },
- { DRM_MODE_CONNECTOR_9PinDIN, "DIN" },
- { DRM_MODE_CONNECTOR_DisplayPort, "DP" },
- { DRM_MODE_CONNECTOR_HDMIA, "HDMI-A" },
- { DRM_MODE_CONNECTOR_HDMIB, "HDMI-B" },
- { DRM_MODE_CONNECTOR_TV, "TV" },
- { DRM_MODE_CONNECTOR_eDP, "eDP" },
- { DRM_MODE_CONNECTOR_VIRTUAL, "Virtual" },
- { DRM_MODE_CONNECTOR_DSI, "DSI" },
- { DRM_MODE_CONNECTOR_DPI, "DPI" },
-};
-
static const struct drm_prop_enum_list drm_encoder_enum_list[] = {
{ DRM_MODE_ENCODER_NONE, "None" },
{ DRM_MODE_ENCODER_DAC, "DAC" },
{ DRM_MODE_ENCODER_DPI, "DPI" },
};
-static const struct drm_prop_enum_list drm_subpixel_enum_list[] = {
- { SubPixelUnknown, "Unknown" },
- { SubPixelHorizontalRGB, "Horizontal RGB" },
- { SubPixelHorizontalBGR, "Horizontal BGR" },
- { SubPixelVerticalRGB, "Vertical RGB" },
- { SubPixelVerticalBGR, "Vertical BGR" },
- { SubPixelNone, "None" },
-};
-
-void drm_connector_ida_init(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(drm_connector_enum_list); i++)
- ida_init(&drm_connector_enum_list[i].ida);
-}
-
-void drm_connector_ida_destroy(void)
-{
- int i;
-
- for (i = 0; i < ARRAY_SIZE(drm_connector_enum_list); i++)
- ida_destroy(&drm_connector_enum_list[i].ida);
-}
-
-/**
- * drm_get_connector_status_name - return a string for connector status
- * @status: connector status to compute name of
- *
- * In contrast to the other drm_get_*_name functions this one here returns a
- * const pointer and hence is threadsafe.
- */
-const char *drm_get_connector_status_name(enum drm_connector_status status)
-{
- if (status == connector_status_connected)
- return "connected";
- else if (status == connector_status_disconnected)
- return "disconnected";
- else
- return "unknown";
-}
-EXPORT_SYMBOL(drm_get_connector_status_name);
-
-/**
- * drm_get_subpixel_order_name - return a string for a given subpixel enum
- * @order: enum of subpixel_order
- *
- * Note you could abuse this and return something out of bounds, but that
- * would be a caller error. No unscrubbed user data should make it here.
+/*
+ * Optional properties
*/
-const char *drm_get_subpixel_order_name(enum subpixel_order order)
-{
- return drm_subpixel_enum_list[order].name;
-}
-EXPORT_SYMBOL(drm_get_subpixel_order_name);
-
/*
* Internal function to assign a slot in the object idr and optionally
* register the object into the idr.
}
EXPORT_SYMBOL(drm_crtc_cleanup);
-/*
- * drm_mode_remove - remove and free a mode
- * @connector: connector list to modify
- * @mode: mode to remove
- *
- * Remove @mode from @connector's mode list, then free it.
- */
-static void drm_mode_remove(struct drm_connector *connector,
- struct drm_display_mode *mode)
-{
- list_del(&mode->head);
- drm_mode_destroy(connector->dev, mode);
-}
-
/**
* drm_display_info_set_bus_formats - set the supported bus formats
* @info: display info to store bus formats in
}
EXPORT_SYMBOL(drm_display_info_set_bus_formats);
-/**
- * drm_connector_get_cmdline_mode - reads the user's cmdline mode
- * @connector: connector to quwery
- *
- * The kernel supports per-connector configration of its consoles through
- * use of the video= parameter. This function parses that option and
- * extracts the user's specified mode (or enable/disable status) for a
- * particular connector. This is typically only used during the early fbdev
- * setup.
- */
-static void drm_connector_get_cmdline_mode(struct drm_connector *connector)
-{
- struct drm_cmdline_mode *mode = &connector->cmdline_mode;
- char *option = NULL;
-
- if (fb_get_options(connector->name, &option))
- return;
-
- if (!drm_mode_parse_command_line_for_connector(option,
- connector,
- mode))
- return;
-
- if (mode->force) {
- const char *s;
-
- switch (mode->force) {
- case DRM_FORCE_OFF:
- s = "OFF";
- break;
- case DRM_FORCE_ON_DIGITAL:
- s = "ON - dig";
- break;
- default:
- case DRM_FORCE_ON:
- s = "ON";
- break;
- }
-
- DRM_INFO("forcing %s connector %s\n", connector->name, s);
- connector->force = mode->force;
- }
-
- DRM_DEBUG_KMS("cmdline mode for connector %s %dx%d@%dHz%s%s%s\n",
- connector->name,
- mode->xres, mode->yres,
- mode->refresh_specified ? mode->refresh : 60,
- mode->rb ? " reduced blanking" : "",
- mode->margins ? " with margins" : "",
- mode->interlace ? " interlaced" : "");
-}
-
-static void drm_connector_free(struct kref *kref)
-{
- struct drm_connector *connector =
- container_of(kref, struct drm_connector, base.refcount);
- struct drm_device *dev = connector->dev;
-
- drm_mode_object_unregister(dev, &connector->base);
- connector->funcs->destroy(connector);
-}
-
-/**
- * drm_connector_init - Init a preallocated connector
- * @dev: DRM device
- * @connector: the connector to init
- * @funcs: callbacks for this connector
- * @connector_type: user visible type of the connector
- *
- * Initialises a preallocated connector. Connectors should be
- * subclassed as part of driver connector objects.
- *
- * Returns:
- * Zero on success, error code on failure.
- */
-int drm_connector_init(struct drm_device *dev,
- struct drm_connector *connector,
- const struct drm_connector_funcs *funcs,
- int connector_type)
-{
- struct drm_mode_config *config = &dev->mode_config;
- int ret;
- struct ida *connector_ida =
- &drm_connector_enum_list[connector_type].ida;
-
- drm_modeset_lock_all(dev);
-
- ret = drm_mode_object_get_reg(dev, &connector->base,
- DRM_MODE_OBJECT_CONNECTOR,
- false, drm_connector_free);
- if (ret)
- goto out_unlock;
-
- connector->base.properties = &connector->properties;
- connector->dev = dev;
- connector->funcs = funcs;
-
- ret = ida_simple_get(&config->connector_ida, 0, 0, GFP_KERNEL);
- if (ret < 0)
- goto out_put;
- connector->index = ret;
- ret = 0;
-
- connector->connector_type = connector_type;
- connector->connector_type_id =
- ida_simple_get(connector_ida, 1, 0, GFP_KERNEL);
- if (connector->connector_type_id < 0) {
- ret = connector->connector_type_id;
- goto out_put_id;
- }
- connector->name =
- kasprintf(GFP_KERNEL, "%s-%d",
- drm_connector_enum_list[connector_type].name,
- connector->connector_type_id);
- if (!connector->name) {
- ret = -ENOMEM;
- goto out_put_type_id;
- }
-
- INIT_LIST_HEAD(&connector->probed_modes);
- INIT_LIST_HEAD(&connector->modes);
- connector->edid_blob_ptr = NULL;
- connector->status = connector_status_unknown;
-
- drm_connector_get_cmdline_mode(connector);
-
- /* We should add connectors at the end to avoid upsetting the connector
- * index too much. */
- list_add_tail(&connector->head, &config->connector_list);
- config->num_connector++;
-
- if (connector_type != DRM_MODE_CONNECTOR_VIRTUAL)
- drm_object_attach_property(&connector->base,
- config->edid_property,
- 0);
-
- drm_object_attach_property(&connector->base,
- config->dpms_property, 0);
-
- if (drm_core_check_feature(dev, DRIVER_ATOMIC)) {
- drm_object_attach_property(&connector->base, config->prop_crtc_id, 0);
- }
-
- connector->debugfs_entry = NULL;
-out_put_type_id:
- if (ret)
- ida_remove(connector_ida, connector->connector_type_id);
-out_put_id:
- if (ret)
- ida_remove(&config->connector_ida, connector->index);
-out_put:
- if (ret)
- drm_mode_object_unregister(dev, &connector->base);
-
-out_unlock:
- drm_modeset_unlock_all(dev);
-
- return ret;
-}
-EXPORT_SYMBOL(drm_connector_init);
-
-/**
- * drm_connector_cleanup - cleans up an initialised connector
- * @connector: connector to cleanup
- *
- * Cleans up the connector but doesn't free the object.
- */
-void drm_connector_cleanup(struct drm_connector *connector)
-{
- struct drm_device *dev = connector->dev;
- struct drm_display_mode *mode, *t;
-
- /* The connector should have been removed from userspace long before
- * it is finally destroyed.
- */
- if (WARN_ON(connector->registered))
- drm_connector_unregister(connector);
-
- if (connector->tile_group) {
- drm_mode_put_tile_group(dev, connector->tile_group);
- connector->tile_group = NULL;
- }
-
- list_for_each_entry_safe(mode, t, &connector->probed_modes, head)
- drm_mode_remove(connector, mode);
-
- list_for_each_entry_safe(mode, t, &connector->modes, head)
- drm_mode_remove(connector, mode);
-
- ida_remove(&drm_connector_enum_list[connector->connector_type].ida,
- connector->connector_type_id);
-
- ida_remove(&dev->mode_config.connector_ida,
- connector->index);
-
- kfree(connector->display_info.bus_formats);
- drm_mode_object_unregister(dev, &connector->base);
- kfree(connector->name);
- connector->name = NULL;
- list_del(&connector->head);
- dev->mode_config.num_connector--;
-
- WARN_ON(connector->state && !connector->funcs->atomic_destroy_state);
- if (connector->state && connector->funcs->atomic_destroy_state)
- connector->funcs->atomic_destroy_state(connector,
- connector->state);
-
- memset(connector, 0, sizeof(*connector));
-}
-EXPORT_SYMBOL(drm_connector_cleanup);
-
-/**
- * drm_connector_register - register a connector
- * @connector: the connector to register
- *
- * Register userspace interfaces for a connector
- *
- * Returns:
- * Zero on success, error code on failure.
- */
-int drm_connector_register(struct drm_connector *connector)
-{
- int ret;
-
- if (connector->registered)
- return 0;
-
- ret = drm_sysfs_connector_add(connector);
- if (ret)
- return ret;
-
- ret = drm_debugfs_connector_add(connector);
- if (ret) {
- goto err_sysfs;
- }
-
- if (connector->funcs->late_register) {
- ret = connector->funcs->late_register(connector);
- if (ret)
- goto err_debugfs;
- }
-
- drm_mode_object_register(connector->dev, &connector->base);
-
- connector->registered = true;
- return 0;
-
-err_debugfs:
- drm_debugfs_connector_remove(connector);
-err_sysfs:
- drm_sysfs_connector_remove(connector);
- return ret;
-}
-EXPORT_SYMBOL(drm_connector_register);
-
-/**
- * drm_connector_unregister - unregister a connector
- * @connector: the connector to unregister
- *
- * Unregister userspace interfaces for a connector
- */
-void drm_connector_unregister(struct drm_connector *connector)
-{
- if (!connector->registered)
- return;
-
- if (connector->funcs->early_unregister)
- connector->funcs->early_unregister(connector);
-
- drm_sysfs_connector_remove(connector);
- drm_debugfs_connector_remove(connector);
-
- connector->registered = false;
-}
-EXPORT_SYMBOL(drm_connector_unregister);
-
-static void drm_connector_unregister_all(struct drm_device *dev)
-{
- struct drm_connector *connector;
-
- /* FIXME: taking the mode config mutex ends up in a clash with sysfs */
- list_for_each_entry(connector, &dev->mode_config.connector_list, head)
- drm_connector_unregister(connector);
-}
-
-static int drm_connector_register_all(struct drm_device *dev)
-{
- struct drm_connector *connector;
- int ret;
-
- /* FIXME: taking the mode config mutex ends up in a clash with
- * fbcon/backlight registration */
- list_for_each_entry(connector, &dev->mode_config.connector_list, head) {
- ret = drm_connector_register(connector);
- if (ret)
- goto err;
- }
-
- return 0;
-
-err:
- mutex_unlock(&dev->mode_config.mutex);
- drm_connector_unregister_all(dev);
- return ret;
-}
-
static int drm_encoder_register_all(struct drm_device *dev)
{
struct drm_encoder *encoder;
static int drm_mode_create_standard_properties(struct drm_device *dev)
{
struct drm_property *prop;
+ int ret;
- /*
- * Standard properties (apply to all connectors)
- */
- prop = drm_property_create(dev, DRM_MODE_PROP_BLOB |
- DRM_MODE_PROP_IMMUTABLE,
- "EDID", 0);
- if (!prop)
- return -ENOMEM;
- dev->mode_config.edid_property = prop;
-
- prop = drm_property_create_enum(dev, 0,
- "DPMS", drm_dpms_enum_list,
- ARRAY_SIZE(drm_dpms_enum_list));
- if (!prop)
- return -ENOMEM;
- dev->mode_config.dpms_property = prop;
-
- prop = drm_property_create(dev,
- DRM_MODE_PROP_BLOB |
- DRM_MODE_PROP_IMMUTABLE,
- "PATH", 0);
- if (!prop)
- return -ENOMEM;
- dev->mode_config.path_property = prop;
-
- prop = drm_property_create(dev,
- DRM_MODE_PROP_BLOB |
- DRM_MODE_PROP_IMMUTABLE,
- "TILE", 0);
- if (!prop)
- return -ENOMEM;
- dev->mode_config.tile_property = prop;
+ ret = drm_connector_create_standard_properties(dev);
+ if (ret)
+ return ret;
prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
"type", drm_plane_type_enum_list,
return 0;
}
-/**
- * drm_mode_create_dvi_i_properties - create DVI-I specific connector properties
- * @dev: DRM device
- *
- * Called by a driver the first time a DVI-I connector is made.
- */
-int drm_mode_create_dvi_i_properties(struct drm_device *dev)
-{
- struct drm_property *dvi_i_selector;
- struct drm_property *dvi_i_subconnector;
-
- if (dev->mode_config.dvi_i_select_subconnector_property)
- return 0;
-
- dvi_i_selector =
- drm_property_create_enum(dev, 0,
- "select subconnector",
- drm_dvi_i_select_enum_list,
- ARRAY_SIZE(drm_dvi_i_select_enum_list));
- dev->mode_config.dvi_i_select_subconnector_property = dvi_i_selector;
-
- dvi_i_subconnector = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
- "subconnector",
- drm_dvi_i_subconnector_enum_list,
- ARRAY_SIZE(drm_dvi_i_subconnector_enum_list));
- dev->mode_config.dvi_i_subconnector_property = dvi_i_subconnector;
-
- return 0;
-}
-EXPORT_SYMBOL(drm_mode_create_dvi_i_properties);
-
-/**
- * drm_create_tv_properties - create TV specific connector properties
- * @dev: DRM device
- * @num_modes: number of different TV formats (modes) supported
- * @modes: array of pointers to strings containing name of each format
- *
- * Called by a driver's TV initialization routine, this function creates
- * the TV specific connector properties for a given device. Caller is
- * responsible for allocating a list of format names and passing them to
- * this routine.
- */
-int drm_mode_create_tv_properties(struct drm_device *dev,
- unsigned int num_modes,
- const char * const modes[])
-{
- struct drm_property *tv_selector;
- struct drm_property *tv_subconnector;
- unsigned int i;
-
- if (dev->mode_config.tv_select_subconnector_property)
- return 0;
-
- /*
- * Basic connector properties
- */
- tv_selector = drm_property_create_enum(dev, 0,
- "select subconnector",
- drm_tv_select_enum_list,
- ARRAY_SIZE(drm_tv_select_enum_list));
- if (!tv_selector)
- goto nomem;
-
- dev->mode_config.tv_select_subconnector_property = tv_selector;
-
- tv_subconnector =
- drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE,
- "subconnector",
- drm_tv_subconnector_enum_list,
- ARRAY_SIZE(drm_tv_subconnector_enum_list));
- if (!tv_subconnector)
- goto nomem;
- dev->mode_config.tv_subconnector_property = tv_subconnector;
-
- /*
- * Other, TV specific properties: margins & TV modes.
- */
- dev->mode_config.tv_left_margin_property =
- drm_property_create_range(dev, 0, "left margin", 0, 100);
- if (!dev->mode_config.tv_left_margin_property)
- goto nomem;
-
- dev->mode_config.tv_right_margin_property =
- drm_property_create_range(dev, 0, "right margin", 0, 100);
- if (!dev->mode_config.tv_right_margin_property)
- goto nomem;
-
- dev->mode_config.tv_top_margin_property =
- drm_property_create_range(dev, 0, "top margin", 0, 100);
- if (!dev->mode_config.tv_top_margin_property)
- goto nomem;
-
- dev->mode_config.tv_bottom_margin_property =
- drm_property_create_range(dev, 0, "bottom margin", 0, 100);
- if (!dev->mode_config.tv_bottom_margin_property)
- goto nomem;
-
- dev->mode_config.tv_mode_property =
- drm_property_create(dev, DRM_MODE_PROP_ENUM,
- "mode", num_modes);
- if (!dev->mode_config.tv_mode_property)
- goto nomem;
-
- for (i = 0; i < num_modes; i++)
- drm_property_add_enum(dev->mode_config.tv_mode_property, i,
- i, modes[i]);
-
- dev->mode_config.tv_brightness_property =
- drm_property_create_range(dev, 0, "brightness", 0, 100);
- if (!dev->mode_config.tv_brightness_property)
- goto nomem;
-
- dev->mode_config.tv_contrast_property =
- drm_property_create_range(dev, 0, "contrast", 0, 100);
- if (!dev->mode_config.tv_contrast_property)
- goto nomem;
-
- dev->mode_config.tv_flicker_reduction_property =
- drm_property_create_range(dev, 0, "flicker reduction", 0, 100);
- if (!dev->mode_config.tv_flicker_reduction_property)
- goto nomem;
-
- dev->mode_config.tv_overscan_property =
- drm_property_create_range(dev, 0, "overscan", 0, 100);
- if (!dev->mode_config.tv_overscan_property)
- goto nomem;
-
- dev->mode_config.tv_saturation_property =
- drm_property_create_range(dev, 0, "saturation", 0, 100);
- if (!dev->mode_config.tv_saturation_property)
- goto nomem;
-
- dev->mode_config.tv_hue_property =
- drm_property_create_range(dev, 0, "hue", 0, 100);
- if (!dev->mode_config.tv_hue_property)
- goto nomem;
-
- return 0;
-nomem:
- return -ENOMEM;
-}
-EXPORT_SYMBOL(drm_mode_create_tv_properties);
-
-/**
- * drm_mode_create_scaling_mode_property - create scaling mode property
- * @dev: DRM device
- *
- * Called by a driver the first time it's needed, must be attached to desired
- * connectors.
- */
-int drm_mode_create_scaling_mode_property(struct drm_device *dev)
-{
- struct drm_property *scaling_mode;
-
- if (dev->mode_config.scaling_mode_property)
- return 0;
-
- scaling_mode =
- drm_property_create_enum(dev, 0, "scaling mode",
- drm_scaling_mode_enum_list,
- ARRAY_SIZE(drm_scaling_mode_enum_list));
-
- dev->mode_config.scaling_mode_property = scaling_mode;
-
- return 0;
-}
-EXPORT_SYMBOL(drm_mode_create_scaling_mode_property);
-
-/**
- * drm_mode_create_aspect_ratio_property - create aspect ratio property
- * @dev: DRM device
- *
- * Called by a driver the first time it's needed, must be attached to desired
- * connectors.
- *
- * Returns:
- * Zero on success, negative errno on failure.
- */
-int drm_mode_create_aspect_ratio_property(struct drm_device *dev)
-{
- if (dev->mode_config.aspect_ratio_property)
- return 0;
-
- dev->mode_config.aspect_ratio_property =
- drm_property_create_enum(dev, 0, "aspect ratio",
- drm_aspect_ratio_enum_list,
- ARRAY_SIZE(drm_aspect_ratio_enum_list));
-
- if (dev->mode_config.aspect_ratio_property == NULL)
- return -ENOMEM;
-
- return 0;
-}
-EXPORT_SYMBOL(drm_mode_create_aspect_ratio_property);
-
-/**
- * drm_mode_create_suggested_offset_properties - create suggests offset properties
- * @dev: DRM device
- *
- * Create the the suggested x/y offset property for connectors.
- */
-int drm_mode_create_suggested_offset_properties(struct drm_device *dev)
-{
- if (dev->mode_config.suggested_x_property && dev->mode_config.suggested_y_property)
- return 0;
-
- dev->mode_config.suggested_x_property =
- drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested X", 0, 0xffffffff);
-
- dev->mode_config.suggested_y_property =
- drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested Y", 0, 0xffffffff);
-
- if (dev->mode_config.suggested_x_property == NULL ||
- dev->mode_config.suggested_y_property == NULL)
- return -ENOMEM;
- return 0;
-}
-EXPORT_SYMBOL(drm_mode_create_suggested_offset_properties);
-
/**
* drm_mode_getresources - get graphics configuration
* @dev: drm device for the ioctl
return 0;
}
-static bool drm_mode_expose_to_userspace(const struct drm_display_mode *mode,
- const struct drm_file *file_priv)
-{
- /*
- * If user-space hasn't configured the driver to expose the stereo 3D
- * modes, don't expose them.
- */
- if (!file_priv->stereo_allowed && drm_mode_is_stereo(mode))
- return false;
-
- return true;
-}
-
-static struct drm_encoder *drm_connector_get_encoder(struct drm_connector *connector)
-{
- /* For atomic drivers only state objects are synchronously updated and
- * protected by modeset locks, so check those first. */
- if (connector->state)
- return connector->state->best_encoder;
- return connector->encoder;
-}
-
/* helper for getconnector and getproperties ioctls */
-static int get_properties(struct drm_mode_object *obj, bool atomic,
- uint32_t __user *prop_ptr, uint64_t __user *prop_values,
- uint32_t *arg_count_props)
+int drm_mode_object_get_properties(struct drm_mode_object *obj, bool atomic,
+ uint32_t __user *prop_ptr,
+ uint64_t __user *prop_values,
+ uint32_t *arg_count_props)
{
int props_count;
int i, ret, copied;
return 0;
}
-/**
- * drm_mode_getconnector - get connector configuration
- * @dev: drm device for the ioctl
- * @data: data pointer for the ioctl
- * @file_priv: drm file for the ioctl call
- *
- * Construct a connector configuration structure to return to the user.
- *
- * Called by the user via ioctl.
- *
- * Returns:
- * Zero on success, negative errno on failure.
- */
-int drm_mode_getconnector(struct drm_device *dev, void *data,
- struct drm_file *file_priv)
-{
- struct drm_mode_get_connector *out_resp = data;
- struct drm_connector *connector;
- struct drm_encoder *encoder;
- struct drm_display_mode *mode;
- int mode_count = 0;
- int encoders_count = 0;
- int ret = 0;
- int copied = 0;
- int i;
- struct drm_mode_modeinfo u_mode;
- struct drm_mode_modeinfo __user *mode_ptr;
- uint32_t __user *encoder_ptr;
-
- if (!drm_core_check_feature(dev, DRIVER_MODESET))
- return -EINVAL;
-
- memset(&u_mode, 0, sizeof(struct drm_mode_modeinfo));
-
- mutex_lock(&dev->mode_config.mutex);
-
- connector = drm_connector_lookup(dev, out_resp->connector_id);
- if (!connector) {
- ret = -ENOENT;
- goto out_unlock;
- }
-
- for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++)
- if (connector->encoder_ids[i] != 0)
- encoders_count++;
-
- if (out_resp->count_modes == 0) {
- connector->funcs->fill_modes(connector,
- dev->mode_config.max_width,
- dev->mode_config.max_height);
- }
-
- /* delayed so we get modes regardless of pre-fill_modes state */
- list_for_each_entry(mode, &connector->modes, head)
- if (drm_mode_expose_to_userspace(mode, file_priv))
- mode_count++;
-
- out_resp->connector_id = connector->base.id;
- out_resp->connector_type = connector->connector_type;
- out_resp->connector_type_id = connector->connector_type_id;
- out_resp->mm_width = connector->display_info.width_mm;
- out_resp->mm_height = connector->display_info.height_mm;
- out_resp->subpixel = connector->display_info.subpixel_order;
- out_resp->connection = connector->status;
-
- drm_modeset_lock(&dev->mode_config.connection_mutex, NULL);
- encoder = drm_connector_get_encoder(connector);
- if (encoder)
- out_resp->encoder_id = encoder->base.id;
- else
- out_resp->encoder_id = 0;
-
- /*
- * This ioctl is called twice, once to determine how much space is
- * needed, and the 2nd time to fill it.
- */
- if ((out_resp->count_modes >= mode_count) && mode_count) {
- copied = 0;
- mode_ptr = (struct drm_mode_modeinfo __user *)(unsigned long)out_resp->modes_ptr;
- list_for_each_entry(mode, &connector->modes, head) {
- if (!drm_mode_expose_to_userspace(mode, file_priv))
- continue;
-
- drm_mode_convert_to_umode(&u_mode, mode);
- if (copy_to_user(mode_ptr + copied,
- &u_mode, sizeof(u_mode))) {
- ret = -EFAULT;
- goto out;
- }
- copied++;
- }
- }
- out_resp->count_modes = mode_count;
-
- ret = get_properties(&connector->base, file_priv->atomic,
- (uint32_t __user *)(unsigned long)(out_resp->props_ptr),
- (uint64_t __user *)(unsigned long)(out_resp->prop_values_ptr),
- &out_resp->count_props);
- if (ret)
- goto out;
-
- if ((out_resp->count_encoders >= encoders_count) && encoders_count) {
- copied = 0;
- encoder_ptr = (uint32_t __user *)(unsigned long)(out_resp->encoders_ptr);
- for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
- if (connector->encoder_ids[i] != 0) {
- if (put_user(connector->encoder_ids[i],
- encoder_ptr + copied)) {
- ret = -EFAULT;
- goto out;
- }
- copied++;
- }
- }
- }
- out_resp->count_encoders = encoders_count;
-
-out:
- drm_modeset_unlock(&dev->mode_config.connection_mutex);
-
- drm_connector_unreference(connector);
-out_unlock:
- mutex_unlock(&dev->mode_config.mutex);
-
- return ret;
-}
-
static struct drm_crtc *drm_encoder_get_crtc(struct drm_encoder *encoder)
{
struct drm_connector *connector;
return ret;
}
-/**
- * drm_mode_connector_set_path_property - set tile property on connector
- * @connector: connector to set property on.
- * @path: path to use for property; must not be NULL.
- *
- * This creates a property to expose to userspace to specify a
- * connector path. This is mainly used for DisplayPort MST where
- * connectors have a topology and we want to allow userspace to give
- * them more meaningful names.
- *
- * Returns:
- * Zero on success, negative errno on failure.
- */
-int drm_mode_connector_set_path_property(struct drm_connector *connector,
- const char *path)
-{
- struct drm_device *dev = connector->dev;
- int ret;
-
- ret = drm_property_replace_global_blob(dev,
- &connector->path_blob_ptr,
- strlen(path) + 1,
- path,
- &connector->base,
- dev->mode_config.path_property);
- return ret;
-}
-EXPORT_SYMBOL(drm_mode_connector_set_path_property);
-
-/**
- * drm_mode_connector_set_tile_property - set tile property on connector
- * @connector: connector to set property on.
- *
- * This looks up the tile information for a connector, and creates a
- * property for userspace to parse if it exists. The property is of
- * the form of 8 integers using ':' as a separator.
- *
- * Returns:
- * Zero on success, errno on failure.
- */
-int drm_mode_connector_set_tile_property(struct drm_connector *connector)
-{
- struct drm_device *dev = connector->dev;
- char tile[256];
- int ret;
-
- if (!connector->has_tile) {
- ret = drm_property_replace_global_blob(dev,
- &connector->tile_blob_ptr,
- 0,
- NULL,
- &connector->base,
- dev->mode_config.tile_property);
- return ret;
- }
-
- snprintf(tile, 256, "%d:%d:%d:%d:%d:%d:%d:%d",
- connector->tile_group->id, connector->tile_is_single_monitor,
- connector->num_h_tile, connector->num_v_tile,
- connector->tile_h_loc, connector->tile_v_loc,
- connector->tile_h_size, connector->tile_v_size);
-
- ret = drm_property_replace_global_blob(dev,
- &connector->tile_blob_ptr,
- strlen(tile) + 1,
- tile,
- &connector->base,
- dev->mode_config.tile_property);
- return ret;
-}
-EXPORT_SYMBOL(drm_mode_connector_set_tile_property);
-
-/**
- * drm_mode_connector_update_edid_property - update the edid property of a connector
- * @connector: drm connector
- * @edid: new value of the edid property
- *
- * This function creates a new blob modeset object and assigns its id to the
- * connector's edid property.
- *
- * Returns:
- * Zero on success, negative errno on failure.
- */
-int drm_mode_connector_update_edid_property(struct drm_connector *connector,
- const struct edid *edid)
-{
- struct drm_device *dev = connector->dev;
- size_t size = 0;
- int ret;
-
- /* ignore requests to set edid when overridden */
- if (connector->override_edid)
- return 0;
-
- if (edid)
- size = EDID_LENGTH * (1 + edid->extensions);
-
- ret = drm_property_replace_global_blob(dev,
- &connector->edid_blob_ptr,
- size,
- edid,
- &connector->base,
- dev->mode_config.edid_property);
- return ret;
-}
-EXPORT_SYMBOL(drm_mode_connector_update_edid_property);
-
/* Some properties could refer to dynamic refcnt'd objects, or things that
* need special locking to handle lifetime issues (ie. to ensure the prop
* value doesn't become invalid part way through the property update due to
drm_property_unreference_blob(obj_to_blob(ref));
}
-/**
- * drm_mode_connector_property_set_ioctl - set the current value of a connector property
- * @dev: DRM device
- * @data: ioctl data
- * @file_priv: DRM file info
- *
- * This function sets the current value for a connectors's property. It also
- * calls into a driver's ->set_property callback to update the hardware state
- *
- * Called by the user via ioctl.
- *
- * Returns:
- * Zero on success, negative errno on failure.
- */
-int drm_mode_connector_property_set_ioctl(struct drm_device *dev,
- void *data, struct drm_file *file_priv)
-{
- struct drm_mode_connector_set_property *conn_set_prop = data;
- struct drm_mode_obj_set_property obj_set_prop = {
- .value = conn_set_prop->value,
- .prop_id = conn_set_prop->prop_id,
- .obj_id = conn_set_prop->connector_id,
- .obj_type = DRM_MODE_OBJECT_CONNECTOR
- };
-
- /* It does all the locking and checking we need */
- return drm_mode_obj_set_property_ioctl(dev, &obj_set_prop, file_priv);
-}
-
-static int drm_mode_connector_set_obj_prop(struct drm_mode_object *obj,
- struct drm_property *property,
- uint64_t value)
-{
- int ret = -EINVAL;
- struct drm_connector *connector = obj_to_connector(obj);
-
- /* Do DPMS ourselves */
- if (property == connector->dev->mode_config.dpms_property) {
- ret = (*connector->funcs->dpms)(connector, (int)value);
- } else if (connector->funcs->set_property)
- ret = connector->funcs->set_property(connector, property, value);
-
- /* store the property value if successful */
- if (!ret)
- drm_object_property_set_value(&connector->base, property, value);
- return ret;
-}
-
static int drm_mode_crtc_set_obj_prop(struct drm_mode_object *obj,
struct drm_property *property,
uint64_t value)
goto out_unref;
}
- ret = get_properties(obj, file_priv->atomic,
+ ret = drm_mode_object_get_properties(obj, file_priv->atomic,
(uint32_t __user *)(unsigned long)(arg->props_ptr),
(uint64_t __user *)(unsigned long)(arg->prop_values_ptr),
&arg->count_props);
return ret;
}
-/**
- * drm_mode_obj_set_property_ioctl - set the current value of an object's property
- * @dev: DRM device
- * @data: ioctl data
- * @file_priv: DRM file info
- *
- * This function sets the current value for an object's property. It also calls
- * into a driver's ->set_property callback to update the hardware state.
- * Compared to the connector specific ioctl this one is extended to also work on
- * crtc and plane objects.
- *
- * Called by the user via ioctl.
- *
- * Returns:
- * Zero on success, negative errno on failure.
- */
int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data,
struct drm_file *file_priv)
{
return ret;
}
-/**
- * drm_mode_connector_attach_encoder - attach a connector to an encoder
- * @connector: connector to attach
- * @encoder: encoder to attach @connector to
- *
- * This function links up a connector to an encoder. Note that the routing
- * restrictions between encoders and crtcs are exposed to userspace through the
- * possible_clones and possible_crtcs bitmasks.
- *
- * Returns:
- * Zero on success, negative errno on failure.
- */
-int drm_mode_connector_attach_encoder(struct drm_connector *connector,
- struct drm_encoder *encoder)
-{
- int i;
-
- /*
- * In the past, drivers have attempted to model the static association
- * of connector to encoder in simple connector/encoder devices using a
- * direct assignment of connector->encoder = encoder. This connection
- * is a logical one and the responsibility of the core, so drivers are
- * expected not to mess with this.
- *
- * Note that the error return should've been enough here, but a large
- * majority of drivers ignores the return value, so add in a big WARN
- * to get people's attention.
- */
- if (WARN_ON(connector->encoder))
- return -EINVAL;
-
- for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) {
- if (connector->encoder_ids[i] == 0) {
- connector->encoder_ids[i] = encoder->base.id;
- return 0;
- }
- }
- return -ENOMEM;
-}
-EXPORT_SYMBOL(drm_mode_connector_attach_encoder);
-
/**
* drm_mode_crtc_set_gamma_size - set the gamma table size
* @crtc: CRTC to set the gamma table size for
/* drm_crtc.c */
-void drm_connector_ida_init(void);
-void drm_connector_ida_destroy(void);
int drm_mode_object_get_reg(struct drm_device *dev,
struct drm_mode_object *obj,
uint32_t obj_type,
uint32_t id, uint32_t type);
void drm_mode_object_unregister(struct drm_device *dev,
struct drm_mode_object *object);
+int drm_mode_object_get_properties(struct drm_mode_object *obj, bool atomic,
+ uint32_t __user *prop_ptr,
+ uint64_t __user *prop_values,
+ uint32_t *arg_count_props);
bool drm_property_change_valid_get(struct drm_property *property,
uint64_t value,
struct drm_mode_object **ref);
struct drm_file *file_priv);
int drm_mode_getcrtc(struct drm_device *dev,
void *data, struct drm_file *file_priv);
-int drm_mode_getconnector(struct drm_device *dev,
- void *data, struct drm_file *file_priv);
int drm_mode_setcrtc(struct drm_device *dev,
void *data, struct drm_file *file_priv);
int drm_mode_getplane(struct drm_device *dev,
void *data, struct drm_file *file_priv);
int drm_mode_destroyblob_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv);
-int drm_mode_connector_property_set_ioctl(struct drm_device *dev,
- void *data, struct drm_file *file_priv);
int drm_mode_getencoder(struct drm_device *dev,
void *data, struct drm_file *file_priv);
int drm_mode_gamma_get_ioctl(struct drm_device *dev,
int drm_mode_page_flip_ioctl(struct drm_device *dev,
void *data, struct drm_file *file_priv);
+/* drm_connector.c */
+void drm_connector_ida_init(void);
+void drm_connector_ida_destroy(void);
+void drm_connector_unregister_all(struct drm_device *dev);
+int drm_connector_register_all(struct drm_device *dev);
+int drm_mode_connector_set_obj_prop(struct drm_mode_object *obj,
+ struct drm_property *property,
+ uint64_t value);
+int drm_connector_create_standard_properties(struct drm_device *dev);
+
+/* IOCTL */
+int drm_mode_connector_property_set_ioctl(struct drm_device *dev,
+ void *data, struct drm_file *file_priv);
+int drm_mode_getconnector(struct drm_device *dev,
+ void *data, struct drm_file *file_priv);
+
/* drm_framebuffer.c */
struct drm_framebuffer *
drm_internal_framebuffer_create(struct drm_device *dev,
--- /dev/null
+/*
+ * Copyright (c) 2016 Intel Corporation
+ *
+ * Permission to use, copy, modify, distribute, and sell this software and its
+ * documentation for any purpose is hereby granted without fee, provided that
+ * the above copyright notice appear in all copies and that both that copyright
+ * notice and this permission notice appear in supporting documentation, and
+ * that the name of the copyright holders not be used in advertising or
+ * publicity pertaining to distribution of the software without specific,
+ * written prior permission. The copyright holders make no representations
+ * about the suitability of this software for any purpose. It is provided "as
+ * is" without express or implied warranty.
+ *
+ * THE COPYRIGHT HOLDERS DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTWARE,
+ * INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO
+ * EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE FOR ANY SPECIAL, INDIRECT OR
+ * CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE,
+ * DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER
+ * TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE
+ * OF THIS SOFTWARE.
+ */
+
+#ifndef __DRM_CONNECTOR_H__
+#define __DRM_CONNECTOR_H__
+
+#include <linux/list.h>
+#include <linux/ctype.h>
+#include <drm/drm_modeset.h>
+
+struct drm_connector_helper_funcs;
+struct drm_device;
+struct drm_crtc;
+struct drm_encoder;
+struct drm_property;
+struct drm_property_blob;
+struct edid;
+
+enum drm_connector_force {
+ DRM_FORCE_UNSPECIFIED,
+ DRM_FORCE_OFF,
+ DRM_FORCE_ON, /* force on analog part normally */
+ DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */
+};
+
+enum drm_connector_status {
+ connector_status_connected = 1,
+ connector_status_disconnected = 2,
+ connector_status_unknown = 3,
+};
+
+enum subpixel_order {
+ SubPixelUnknown = 0,
+ SubPixelHorizontalRGB,
+ SubPixelHorizontalBGR,
+ SubPixelVerticalRGB,
+ SubPixelVerticalBGR,
+ SubPixelNone,
+};
+
+/*
+ * Describes a given display (e.g. CRT or flat panel) and its limitations.
+ */
+struct drm_display_info {
+ char name[DRM_DISPLAY_INFO_LEN];
+
+ /* Physical size */
+ unsigned int width_mm;
+ unsigned int height_mm;
+
+ /* Clock limits FIXME: storage format */
+ unsigned int min_vfreq, max_vfreq;
+ unsigned int min_hfreq, max_hfreq;
+ unsigned int pixel_clock;
+ unsigned int bpc;
+
+ enum subpixel_order subpixel_order;
+
+#define DRM_COLOR_FORMAT_RGB444 (1<<0)
+#define DRM_COLOR_FORMAT_YCRCB444 (1<<1)
+#define DRM_COLOR_FORMAT_YCRCB422 (1<<2)
+
+ u32 color_formats;
+
+ const u32 *bus_formats;
+ unsigned int num_bus_formats;
+
+#define DRM_BUS_FLAG_DE_LOW (1<<0)
+#define DRM_BUS_FLAG_DE_HIGH (1<<1)
+/* drive data on pos. edge */
+#define DRM_BUS_FLAG_PIXDATA_POSEDGE (1<<2)
+/* drive data on neg. edge */
+#define DRM_BUS_FLAG_PIXDATA_NEGEDGE (1<<3)
+
+ u32 bus_flags;
+
+ /* Mask of supported hdmi deep color modes */
+ u8 edid_hdmi_dc_modes;
+
+ u8 cea_rev;
+};
+
+/**
+ * struct drm_connector_state - mutable connector state
+ * @connector: backpointer to the connector
+ * @crtc: CRTC to connect connector to, NULL if disabled
+ * @best_encoder: can be used by helpers and drivers to select the encoder
+ * @state: backpointer to global drm_atomic_state
+ */
+struct drm_connector_state {
+ struct drm_connector *connector;
+
+ struct drm_crtc *crtc; /* do not write directly, use drm_atomic_set_crtc_for_connector() */
+
+ struct drm_encoder *best_encoder;
+
+ struct drm_atomic_state *state;
+};
+
+/**
+ * struct drm_connector_funcs - control connectors on a given device
+ *
+ * Each CRTC may have one or more connectors attached to it. The functions
+ * below allow the core DRM code to control connectors, enumerate available modes,
+ * etc.
+ */
+struct drm_connector_funcs {
+ /**
+ * @dpms:
+ *
+ * Legacy entry point to set the per-connector DPMS state. Legacy DPMS
+ * is exposed as a standard property on the connector, but diverted to
+ * this callback in the drm core. Note that atomic drivers don't
+ * implement the 4 level DPMS support on the connector any more, but
+ * instead only have an on/off "ACTIVE" property on the CRTC object.
+ *
+ * Drivers implementing atomic modeset should use
+ * drm_atomic_helper_connector_dpms() to implement this hook.
+ *
+ * RETURNS:
+ *
+ * 0 on success or a negative error code on failure.
+ */
+ int (*dpms)(struct drm_connector *connector, int mode);
+
+ /**
+ * @reset:
+ *
+ * Reset connector hardware and software state to off. This function isn't
+ * called by the core directly, only through drm_mode_config_reset().
+ * It's not a helper hook only for historical reasons.
+ *
+ * Atomic drivers can use drm_atomic_helper_connector_reset() to reset
+ * atomic state using this hook.
+ */
+ void (*reset)(struct drm_connector *connector);
+
+ /**
+ * @detect:
+ *
+ * Check to see if anything is attached to the connector. The parameter
+ * force is set to false whilst polling, true when checking the
+ * connector due to a user request. force can be used by the driver to
+ * avoid expensive, destructive operations during automated probing.
+ *
+ * FIXME:
+ *
+ * Note that this hook is only called by the probe helper. It's not in
+ * the helper library vtable purely for historical reasons. The only DRM
+ * core entry point to probe connector state is @fill_modes.
+ *
+ * RETURNS:
+ *
+ * drm_connector_status indicating the connector's status.
+ */
+ enum drm_connector_status (*detect)(struct drm_connector *connector,
+ bool force);
+
+ /**
+ * @force:
+ *
+ * This function is called to update internal encoder state when the
+ * connector is forced to a certain state by userspace, either through
+ * the sysfs interfaces or on the kernel cmdline. In that case the
+ * @detect callback isn't called.
+ *
+ * FIXME:
+ *
+ * Note that this hook is only called by the probe helper. It's not in
+ * the helper library vtable purely for historical reasons. The only DRM
+ * core entry point to probe connector state is @fill_modes.
+ */
+ void (*force)(struct drm_connector *connector);
+
+ /**
+ * @fill_modes:
+ *
+ * Entry point for output detection and basic mode validation. The
+ * driver should reprobe the output if needed (e.g. when hotplug
+ * handling is unreliable), add all detected modes to connector->modes
+ * and filter out any the device can't support in any configuration. It
+ * also needs to filter out any modes wider or higher than the
+ * parameters max_width and max_height indicate.
+ *
+ * The drivers must also prune any modes no longer valid from
+ * connector->modes. Furthermore it must update connector->status and
+ * connector->edid. If no EDID has been received for this output
+ * connector->edid must be NULL.
+ *
+ * Drivers using the probe helpers should use
+ * drm_helper_probe_single_connector_modes() or
+ * drm_helper_probe_single_connector_modes_nomerge() to implement this
+ * function.
+ *
+ * RETURNS:
+ *
+ * The number of modes detected and filled into connector->modes.
+ */
+ int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height);
+
+ /**
+ * @set_property:
+ *
+ * This is the legacy entry point to update a property attached to the
+ * connector.
+ *
+ * Drivers implementing atomic modeset should use
+ * drm_atomic_helper_connector_set_property() to implement this hook.
+ *
+ * This callback is optional if the driver does not support any legacy
+ * driver-private properties.
+ *
+ * RETURNS:
+ *
+ * 0 on success or a negative error code on failure.
+ */
+ int (*set_property)(struct drm_connector *connector, struct drm_property *property,
+ uint64_t val);
+
+ /**
+ * @late_register:
+ *
+ * This optional hook can be used to register additional userspace
+ * interfaces attached to the connector, light backlight control, i2c,
+ * DP aux or similar interfaces. It is called late in the driver load
+ * sequence from drm_connector_register() when registering all the
+ * core drm connector interfaces. Everything added from this callback
+ * should be unregistered in the early_unregister callback.
+ *
+ * Returns:
+ *
+ * 0 on success, or a negative error code on failure.
+ */
+ int (*late_register)(struct drm_connector *connector);
+
+ /**
+ * @early_unregister:
+ *
+ * This optional hook should be used to unregister the additional
+ * userspace interfaces attached to the connector from
+ * late_unregister(). It is called from drm_connector_unregister(),
+ * early in the driver unload sequence to disable userspace access
+ * before data structures are torndown.
+ */
+ void (*early_unregister)(struct drm_connector *connector);
+
+ /**
+ * @destroy:
+ *
+ * Clean up connector resources. This is called at driver unload time
+ * through drm_mode_config_cleanup(). It can also be called at runtime
+ * when a connector is being hot-unplugged for drivers that support
+ * connector hotplugging (e.g. DisplayPort MST).
+ */
+ void (*destroy)(struct drm_connector *connector);
+
+ /**
+ * @atomic_duplicate_state:
+ *
+ * Duplicate the current atomic state for this connector and return it.
+ * The core and helpers gurantee that any atomic state duplicated with
+ * this hook and still owned by the caller (i.e. not transferred to the
+ * driver by calling ->atomic_commit() from struct
+ * &drm_mode_config_funcs) will be cleaned up by calling the
+ * @atomic_destroy_state hook in this structure.
+ *
+ * Atomic drivers which don't subclass struct &drm_connector_state should use
+ * drm_atomic_helper_connector_duplicate_state(). Drivers that subclass the
+ * state structure to extend it with driver-private state should use
+ * __drm_atomic_helper_connector_duplicate_state() to make sure shared state is
+ * duplicated in a consistent fashion across drivers.
+ *
+ * It is an error to call this hook before connector->state has been
+ * initialized correctly.
+ *
+ * NOTE:
+ *
+ * If the duplicate state references refcounted resources this hook must
+ * acquire a reference for each of them. The driver must release these
+ * references again in @atomic_destroy_state.
+ *
+ * RETURNS:
+ *
+ * Duplicated atomic state or NULL when the allocation failed.
+ */
+ struct drm_connector_state *(*atomic_duplicate_state)(struct drm_connector *connector);
+
+ /**
+ * @atomic_destroy_state:
+ *
+ * Destroy a state duplicated with @atomic_duplicate_state and release
+ * or unreference all resources it references
+ */
+ void (*atomic_destroy_state)(struct drm_connector *connector,
+ struct drm_connector_state *state);
+
+ /**
+ * @atomic_set_property:
+ *
+ * Decode a driver-private property value and store the decoded value
+ * into the passed-in state structure. Since the atomic core decodes all
+ * standardized properties (even for extensions beyond the core set of
+ * properties which might not be implemented by all drivers) this
+ * requires drivers to subclass the state structure.
+ *
+ * Such driver-private properties should really only be implemented for
+ * truly hardware/vendor specific state. Instead it is preferred to
+ * standardize atomic extension and decode the properties used to expose
+ * such an extension in the core.
+ *
+ * Do not call this function directly, use
+ * drm_atomic_connector_set_property() instead.
+ *
+ * This callback is optional if the driver does not support any
+ * driver-private atomic properties.
+ *
+ * NOTE:
+ *
+ * This function is called in the state assembly phase of atomic
+ * modesets, which can be aborted for any reason (including on
+ * userspace's request to just check whether a configuration would be
+ * possible). Drivers MUST NOT touch any persistent state (hardware or
+ * software) or data structures except the passed in @state parameter.
+ *
+ * Also since userspace controls in which order properties are set this
+ * function must not do any input validation (since the state update is
+ * incomplete and hence likely inconsistent). Instead any such input
+ * validation must be done in the various atomic_check callbacks.
+ *
+ * RETURNS:
+ *
+ * 0 if the property has been found, -EINVAL if the property isn't
+ * implemented by the driver (which shouldn't ever happen, the core only
+ * asks for properties attached to this connector). No other validation
+ * is allowed by the driver. The core already checks that the property
+ * value is within the range (integer, valid enum value, ...) the driver
+ * set when registering the property.
+ */
+ int (*atomic_set_property)(struct drm_connector *connector,
+ struct drm_connector_state *state,
+ struct drm_property *property,
+ uint64_t val);
+
+ /**
+ * @atomic_get_property:
+ *
+ * Reads out the decoded driver-private property. This is used to
+ * implement the GETCONNECTOR IOCTL.
+ *
+ * Do not call this function directly, use
+ * drm_atomic_connector_get_property() instead.
+ *
+ * This callback is optional if the driver does not support any
+ * driver-private atomic properties.
+ *
+ * RETURNS:
+ *
+ * 0 on success, -EINVAL if the property isn't implemented by the
+ * driver (which shouldn't ever happen, the core only asks for
+ * properties attached to this connector).
+ */
+ int (*atomic_get_property)(struct drm_connector *connector,
+ const struct drm_connector_state *state,
+ struct drm_property *property,
+ uint64_t *val);
+};
+
+/* mode specified on the command line */
+struct drm_cmdline_mode {
+ bool specified;
+ bool refresh_specified;
+ bool bpp_specified;
+ int xres, yres;
+ int bpp;
+ int refresh;
+ bool rb;
+ bool interlace;
+ bool cvt;
+ bool margins;
+ enum drm_connector_force force;
+};
+
+/**
+ * struct drm_connector - central DRM connector control structure
+ * @dev: parent DRM device
+ * @kdev: kernel device for sysfs attributes
+ * @attr: sysfs attributes
+ * @head: list management
+ * @base: base KMS object
+ * @name: human readable name, can be overwritten by the driver
+ * @connector_type: one of the DRM_MODE_CONNECTOR_<foo> types from drm_mode.h
+ * @connector_type_id: index into connector type enum
+ * @interlace_allowed: can this connector handle interlaced modes?
+ * @doublescan_allowed: can this connector handle doublescan?
+ * @stereo_allowed: can this connector handle stereo modes?
+ * @registered: is this connector exposed (registered) with userspace?
+ * @modes: modes available on this connector (from fill_modes() + user)
+ * @status: one of the drm_connector_status enums (connected, not, or unknown)
+ * @probed_modes: list of modes derived directly from the display
+ * @display_info: information about attached display (e.g. from EDID)
+ * @funcs: connector control functions
+ * @edid_blob_ptr: DRM property containing EDID if present
+ * @properties: property tracking for this connector
+ * @polled: a DRM_CONNECTOR_POLL_<foo> value for core driven polling
+ * @dpms: current dpms state
+ * @helper_private: mid-layer private data
+ * @cmdline_mode: mode line parsed from the kernel cmdline for this connector
+ * @force: a DRM_FORCE_<foo> state for forced mode sets
+ * @override_edid: has the EDID been overwritten through debugfs for testing?
+ * @encoder_ids: valid encoders for this connector
+ * @encoder: encoder driving this connector, if any
+ * @eld: EDID-like data, if present
+ * @dvi_dual: dual link DVI, if found
+ * @max_tmds_clock: max clock rate, if found
+ * @latency_present: AV delay info from ELD, if found
+ * @video_latency: video latency info from ELD, if found
+ * @audio_latency: audio latency info from ELD, if found
+ * @null_edid_counter: track sinks that give us all zeros for the EDID
+ * @bad_edid_counter: track sinks that give us an EDID with invalid checksum
+ * @edid_corrupt: indicates whether the last read EDID was corrupt
+ * @debugfs_entry: debugfs directory for this connector
+ * @state: current atomic state for this connector
+ * @has_tile: is this connector connected to a tiled monitor
+ * @tile_group: tile group for the connected monitor
+ * @tile_is_single_monitor: whether the tile is one monitor housing
+ * @num_h_tile: number of horizontal tiles in the tile group
+ * @num_v_tile: number of vertical tiles in the tile group
+ * @tile_h_loc: horizontal location of this tile
+ * @tile_v_loc: vertical location of this tile
+ * @tile_h_size: horizontal size of this tile.
+ * @tile_v_size: vertical size of this tile.
+ *
+ * Each connector may be connected to one or more CRTCs, or may be clonable by
+ * another connector if they can share a CRTC. Each connector also has a specific
+ * position in the broader display (referred to as a 'screen' though it could
+ * span multiple monitors).
+ */
+struct drm_connector {
+ struct drm_device *dev;
+ struct device *kdev;
+ struct device_attribute *attr;
+ struct list_head head;
+
+ struct drm_mode_object base;
+
+ char *name;
+
+ /**
+ * @index: Compacted connector index, which matches the position inside
+ * the mode_config.list for drivers not supporting hot-add/removing. Can
+ * be used as an array index. It is invariant over the lifetime of the
+ * connector.
+ */
+ unsigned index;
+
+ int connector_type;
+ int connector_type_id;
+ bool interlace_allowed;
+ bool doublescan_allowed;
+ bool stereo_allowed;
+ bool registered;
+ struct list_head modes; /* list of modes on this connector */
+
+ enum drm_connector_status status;
+
+ /* these are modes added by probing with DDC or the BIOS */
+ struct list_head probed_modes;
+
+ struct drm_display_info display_info;
+ const struct drm_connector_funcs *funcs;
+
+ struct drm_property_blob *edid_blob_ptr;
+ struct drm_object_properties properties;
+
+ /**
+ * @path_blob_ptr:
+ *
+ * DRM blob property data for the DP MST path property.
+ */
+ struct drm_property_blob *path_blob_ptr;
+
+ /**
+ * @tile_blob_ptr:
+ *
+ * DRM blob property data for the tile property (used mostly by DP MST).
+ * This is meant for screens which are driven through separate display
+ * pipelines represented by &drm_crtc, which might not be running with
+ * genlocked clocks. For tiled panels which are genlocked, like
+ * dual-link LVDS or dual-link DSI, the driver should try to not expose
+ * the tiling and virtualize both &drm_crtc and &drm_plane if needed.
+ */
+ struct drm_property_blob *tile_blob_ptr;
+
+/* should we poll this connector for connects and disconnects */
+/* hot plug detectable */
+#define DRM_CONNECTOR_POLL_HPD (1 << 0)
+/* poll for connections */
+#define DRM_CONNECTOR_POLL_CONNECT (1 << 1)
+/* can cleanly poll for disconnections without flickering the screen */
+/* DACs should rarely do this without a lot of testing */
+#define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2)
+
+ uint8_t polled; /* DRM_CONNECTOR_POLL_* */
+
+ /* requested DPMS state */
+ int dpms;
+
+ const struct drm_connector_helper_funcs *helper_private;
+
+ /* forced on connector */
+ struct drm_cmdline_mode cmdline_mode;
+ enum drm_connector_force force;
+ bool override_edid;
+
+#define DRM_CONNECTOR_MAX_ENCODER 3
+ uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER];
+ struct drm_encoder *encoder; /* currently active encoder */
+
+#define MAX_ELD_BYTES 128
+ /* EDID bits */
+ uint8_t eld[MAX_ELD_BYTES];
+ bool dvi_dual;
+ int max_tmds_clock; /* in MHz */
+ bool latency_present[2];
+ int video_latency[2]; /* [0]: progressive, [1]: interlaced */
+ int audio_latency[2];
+ int null_edid_counter; /* needed to workaround some HW bugs where we get all 0s */
+ unsigned bad_edid_counter;
+
+ /* Flag for raw EDID header corruption - used in Displayport
+ * compliance testing - * Displayport Link CTS Core 1.2 rev1.1 4.2.2.6
+ */
+ bool edid_corrupt;
+
+ struct dentry *debugfs_entry;
+
+ struct drm_connector_state *state;
+
+ /* DisplayID bits */
+ bool has_tile;
+ struct drm_tile_group *tile_group;
+ bool tile_is_single_monitor;
+
+ uint8_t num_h_tile, num_v_tile;
+ uint8_t tile_h_loc, tile_v_loc;
+ uint16_t tile_h_size, tile_v_size;
+};
+
+#define obj_to_connector(x) container_of(x, struct drm_connector, base)
+
+int drm_connector_init(struct drm_device *dev,
+ struct drm_connector *connector,
+ const struct drm_connector_funcs *funcs,
+ int connector_type);
+int drm_connector_register(struct drm_connector *connector);
+void drm_connector_unregister(struct drm_connector *connector);
+int drm_mode_connector_attach_encoder(struct drm_connector *connector,
+ struct drm_encoder *encoder);
+
+void drm_connector_cleanup(struct drm_connector *connector);
+static inline unsigned drm_connector_index(struct drm_connector *connector)
+{
+ return connector->index;
+}
+
+/**
+ * drm_connector_lookup - lookup connector object
+ * @dev: DRM device
+ * @id: connector object id
+ *
+ * This function looks up the connector object specified by id
+ * add takes a reference to it.
+ */
+static inline struct drm_connector *drm_connector_lookup(struct drm_device *dev,
+ uint32_t id)
+{
+ struct drm_mode_object *mo;
+ mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_CONNECTOR);
+ return mo ? obj_to_connector(mo) : NULL;
+}
+
+/**
+ * drm_connector_reference - incr the connector refcnt
+ * @connector: connector
+ *
+ * This function increments the connector's refcount.
+ */
+static inline void drm_connector_reference(struct drm_connector *connector)
+{
+ drm_mode_object_reference(&connector->base);
+}
+
+/**
+ * drm_connector_unreference - unref a connector
+ * @connector: connector to unref
+ *
+ * This function decrements the connector's refcount and frees it if it drops to zero.
+ */
+static inline void drm_connector_unreference(struct drm_connector *connector)
+{
+ drm_mode_object_unreference(&connector->base);
+}
+
+const char *drm_get_connector_status_name(enum drm_connector_status status);
+const char *drm_get_subpixel_order_name(enum subpixel_order order);
+const char *drm_get_dpms_name(int val);
+const char *drm_get_dvi_i_subconnector_name(int val);
+const char *drm_get_dvi_i_select_name(int val);
+const char *drm_get_tv_subconnector_name(int val);
+const char *drm_get_tv_select_name(int val);
+
+int drm_mode_create_dvi_i_properties(struct drm_device *dev);
+int drm_mode_create_tv_properties(struct drm_device *dev,
+ unsigned int num_modes,
+ const char * const modes[]);
+int drm_mode_create_scaling_mode_property(struct drm_device *dev);
+int drm_mode_create_aspect_ratio_property(struct drm_device *dev);
+int drm_mode_create_suggested_offset_properties(struct drm_device *dev);
+
+int drm_mode_connector_set_path_property(struct drm_connector *connector,
+ const char *path);
+int drm_mode_connector_set_tile_property(struct drm_connector *connector);
+int drm_mode_connector_update_edid_property(struct drm_connector *connector,
+ const struct edid *edid);
+#endif
#include <drm/drm_modeset.h>
#include <drm/drm_framebuffer.h>
#include <drm/drm_modes.h>
+#include <drm/drm_connector.h>
struct drm_device;
struct drm_mode_set;
-struct drm_object_properties;
struct drm_file;
struct drm_clip_rect;
struct device_node;
struct fence;
struct edid;
-#define DRM_OBJECT_MAX_PROPERTY 24
-struct drm_object_properties {
- int count, atomic_count;
- /* NOTE: if we ever start dynamically destroying properties (ie.
- * not at drm_mode_config_cleanup() time), then we'd have to do
- * a better job of detaching property from mode objects to avoid
- * dangling property pointers:
- */
- struct drm_property *properties[DRM_OBJECT_MAX_PROPERTY];
- /* do not read/write values directly, but use drm_object_property_get_value()
- * and drm_object_property_set_value():
- */
- uint64_t values[DRM_OBJECT_MAX_PROPERTY];
-};
-
static inline int64_t U642I64(uint64_t val)
{
return (int64_t)*((int64_t *)&val);
#define DRM_REFLECT_Y BIT(5)
#define DRM_REFLECT_MASK (DRM_REFLECT_X | DRM_REFLECT_Y)
-enum drm_connector_status {
- connector_status_connected = 1,
- connector_status_disconnected = 2,
- connector_status_unknown = 3,
-};
-
-enum subpixel_order {
- SubPixelUnknown = 0,
- SubPixelHorizontalRGB,
- SubPixelHorizontalBGR,
- SubPixelVerticalRGB,
- SubPixelVerticalBGR,
- SubPixelNone,
-};
-
-#define DRM_COLOR_FORMAT_RGB444 (1<<0)
-#define DRM_COLOR_FORMAT_YCRCB444 (1<<1)
-#define DRM_COLOR_FORMAT_YCRCB422 (1<<2)
-
-#define DRM_BUS_FLAG_DE_LOW (1<<0)
-#define DRM_BUS_FLAG_DE_HIGH (1<<1)
-/* drive data on pos. edge */
-#define DRM_BUS_FLAG_PIXDATA_POSEDGE (1<<2)
-/* drive data on neg. edge */
-#define DRM_BUS_FLAG_PIXDATA_NEGEDGE (1<<3)
-
-/*
- * Describes a given display (e.g. CRT or flat panel) and its limitations.
- */
-struct drm_display_info {
- char name[DRM_DISPLAY_INFO_LEN];
-
- /* Physical size */
- unsigned int width_mm;
- unsigned int height_mm;
-
- /* Clock limits FIXME: storage format */
- unsigned int min_vfreq, max_vfreq;
- unsigned int min_hfreq, max_hfreq;
- unsigned int pixel_clock;
- unsigned int bpc;
-
- enum subpixel_order subpixel_order;
- u32 color_formats;
-
- const u32 *bus_formats;
- unsigned int num_bus_formats;
- u32 bus_flags;
-
- /* Mask of supported hdmi deep color modes */
- u8 edid_hdmi_dc_modes;
-
- u8 cea_rev;
-};
-
/* data corresponds to displayid vend/prod/serial */
struct drm_tile_group {
struct kref refcount;
};
struct drm_crtc;
-struct drm_connector;
struct drm_encoder;
struct drm_pending_vblank_event;
struct drm_plane;
struct drm_crtc_helper_funcs;
struct drm_encoder_helper_funcs;
-struct drm_connector_helper_funcs;
struct drm_plane_helper_funcs;
/**
struct drm_modeset_acquire_ctx *acquire_ctx;
};
-/**
- * struct drm_connector_state - mutable connector state
- * @connector: backpointer to the connector
- * @crtc: CRTC to connect connector to, NULL if disabled
- * @best_encoder: can be used by helpers and drivers to select the encoder
- * @state: backpointer to global drm_atomic_state
- */
-struct drm_connector_state {
- struct drm_connector *connector;
-
- struct drm_crtc *crtc; /* do not write directly, use drm_atomic_set_crtc_for_connector() */
-
- struct drm_encoder *best_encoder;
-
- struct drm_atomic_state *state;
-};
-
-/**
- * struct drm_connector_funcs - control connectors on a given device
- *
- * Each CRTC may have one or more connectors attached to it. The functions
- * below allow the core DRM code to control connectors, enumerate available modes,
- * etc.
- */
-struct drm_connector_funcs {
- /**
- * @dpms:
- *
- * Legacy entry point to set the per-connector DPMS state. Legacy DPMS
- * is exposed as a standard property on the connector, but diverted to
- * this callback in the drm core. Note that atomic drivers don't
- * implement the 4 level DPMS support on the connector any more, but
- * instead only have an on/off "ACTIVE" property on the CRTC object.
- *
- * Drivers implementing atomic modeset should use
- * drm_atomic_helper_connector_dpms() to implement this hook.
- *
- * RETURNS:
- *
- * 0 on success or a negative error code on failure.
- */
- int (*dpms)(struct drm_connector *connector, int mode);
-
- /**
- * @reset:
- *
- * Reset connector hardware and software state to off. This function isn't
- * called by the core directly, only through drm_mode_config_reset().
- * It's not a helper hook only for historical reasons.
- *
- * Atomic drivers can use drm_atomic_helper_connector_reset() to reset
- * atomic state using this hook.
- */
- void (*reset)(struct drm_connector *connector);
-
- /**
- * @detect:
- *
- * Check to see if anything is attached to the connector. The parameter
- * force is set to false whilst polling, true when checking the
- * connector due to a user request. force can be used by the driver to
- * avoid expensive, destructive operations during automated probing.
- *
- * FIXME:
- *
- * Note that this hook is only called by the probe helper. It's not in
- * the helper library vtable purely for historical reasons. The only DRM
- * core entry point to probe connector state is @fill_modes.
- *
- * RETURNS:
- *
- * drm_connector_status indicating the connector's status.
- */
- enum drm_connector_status (*detect)(struct drm_connector *connector,
- bool force);
-
- /**
- * @force:
- *
- * This function is called to update internal encoder state when the
- * connector is forced to a certain state by userspace, either through
- * the sysfs interfaces or on the kernel cmdline. In that case the
- * @detect callback isn't called.
- *
- * FIXME:
- *
- * Note that this hook is only called by the probe helper. It's not in
- * the helper library vtable purely for historical reasons. The only DRM
- * core entry point to probe connector state is @fill_modes.
- */
- void (*force)(struct drm_connector *connector);
-
- /**
- * @fill_modes:
- *
- * Entry point for output detection and basic mode validation. The
- * driver should reprobe the output if needed (e.g. when hotplug
- * handling is unreliable), add all detected modes to connector->modes
- * and filter out any the device can't support in any configuration. It
- * also needs to filter out any modes wider or higher than the
- * parameters max_width and max_height indicate.
- *
- * The drivers must also prune any modes no longer valid from
- * connector->modes. Furthermore it must update connector->status and
- * connector->edid. If no EDID has been received for this output
- * connector->edid must be NULL.
- *
- * Drivers using the probe helpers should use
- * drm_helper_probe_single_connector_modes() or
- * drm_helper_probe_single_connector_modes_nomerge() to implement this
- * function.
- *
- * RETURNS:
- *
- * The number of modes detected and filled into connector->modes.
- */
- int (*fill_modes)(struct drm_connector *connector, uint32_t max_width, uint32_t max_height);
-
- /**
- * @set_property:
- *
- * This is the legacy entry point to update a property attached to the
- * connector.
- *
- * Drivers implementing atomic modeset should use
- * drm_atomic_helper_connector_set_property() to implement this hook.
- *
- * This callback is optional if the driver does not support any legacy
- * driver-private properties.
- *
- * RETURNS:
- *
- * 0 on success or a negative error code on failure.
- */
- int (*set_property)(struct drm_connector *connector, struct drm_property *property,
- uint64_t val);
-
- /**
- * @late_register:
- *
- * This optional hook can be used to register additional userspace
- * interfaces attached to the connector, light backlight control, i2c,
- * DP aux or similar interfaces. It is called late in the driver load
- * sequence from drm_connector_register() when registering all the
- * core drm connector interfaces. Everything added from this callback
- * should be unregistered in the early_unregister callback.
- *
- * Returns:
- *
- * 0 on success, or a negative error code on failure.
- */
- int (*late_register)(struct drm_connector *connector);
-
- /**
- * @early_unregister:
- *
- * This optional hook should be used to unregister the additional
- * userspace interfaces attached to the connector from
- * late_unregister(). It is called from drm_connector_unregister(),
- * early in the driver unload sequence to disable userspace access
- * before data structures are torndown.
- */
- void (*early_unregister)(struct drm_connector *connector);
-
- /**
- * @destroy:
- *
- * Clean up connector resources. This is called at driver unload time
- * through drm_mode_config_cleanup(). It can also be called at runtime
- * when a connector is being hot-unplugged for drivers that support
- * connector hotplugging (e.g. DisplayPort MST).
- */
- void (*destroy)(struct drm_connector *connector);
-
- /**
- * @atomic_duplicate_state:
- *
- * Duplicate the current atomic state for this connector and return it.
- * The core and helpers gurantee that any atomic state duplicated with
- * this hook and still owned by the caller (i.e. not transferred to the
- * driver by calling ->atomic_commit() from struct
- * &drm_mode_config_funcs) will be cleaned up by calling the
- * @atomic_destroy_state hook in this structure.
- *
- * Atomic drivers which don't subclass struct &drm_connector_state should use
- * drm_atomic_helper_connector_duplicate_state(). Drivers that subclass the
- * state structure to extend it with driver-private state should use
- * __drm_atomic_helper_connector_duplicate_state() to make sure shared state is
- * duplicated in a consistent fashion across drivers.
- *
- * It is an error to call this hook before connector->state has been
- * initialized correctly.
- *
- * NOTE:
- *
- * If the duplicate state references refcounted resources this hook must
- * acquire a reference for each of them. The driver must release these
- * references again in @atomic_destroy_state.
- *
- * RETURNS:
- *
- * Duplicated atomic state or NULL when the allocation failed.
- */
- struct drm_connector_state *(*atomic_duplicate_state)(struct drm_connector *connector);
-
- /**
- * @atomic_destroy_state:
- *
- * Destroy a state duplicated with @atomic_duplicate_state and release
- * or unreference all resources it references
- */
- void (*atomic_destroy_state)(struct drm_connector *connector,
- struct drm_connector_state *state);
-
- /**
- * @atomic_set_property:
- *
- * Decode a driver-private property value and store the decoded value
- * into the passed-in state structure. Since the atomic core decodes all
- * standardized properties (even for extensions beyond the core set of
- * properties which might not be implemented by all drivers) this
- * requires drivers to subclass the state structure.
- *
- * Such driver-private properties should really only be implemented for
- * truly hardware/vendor specific state. Instead it is preferred to
- * standardize atomic extension and decode the properties used to expose
- * such an extension in the core.
- *
- * Do not call this function directly, use
- * drm_atomic_connector_set_property() instead.
- *
- * This callback is optional if the driver does not support any
- * driver-private atomic properties.
- *
- * NOTE:
- *
- * This function is called in the state assembly phase of atomic
- * modesets, which can be aborted for any reason (including on
- * userspace's request to just check whether a configuration would be
- * possible). Drivers MUST NOT touch any persistent state (hardware or
- * software) or data structures except the passed in @state parameter.
- *
- * Also since userspace controls in which order properties are set this
- * function must not do any input validation (since the state update is
- * incomplete and hence likely inconsistent). Instead any such input
- * validation must be done in the various atomic_check callbacks.
- *
- * RETURNS:
- *
- * 0 if the property has been found, -EINVAL if the property isn't
- * implemented by the driver (which shouldn't ever happen, the core only
- * asks for properties attached to this connector). No other validation
- * is allowed by the driver. The core already checks that the property
- * value is within the range (integer, valid enum value, ...) the driver
- * set when registering the property.
- */
- int (*atomic_set_property)(struct drm_connector *connector,
- struct drm_connector_state *state,
- struct drm_property *property,
- uint64_t val);
-
- /**
- * @atomic_get_property:
- *
- * Reads out the decoded driver-private property. This is used to
- * implement the GETCONNECTOR IOCTL.
- *
- * Do not call this function directly, use
- * drm_atomic_connector_get_property() instead.
- *
- * This callback is optional if the driver does not support any
- * driver-private atomic properties.
- *
- * RETURNS:
- *
- * 0 on success, -EINVAL if the property isn't implemented by the
- * driver (which shouldn't ever happen, the core only asks for
- * properties attached to this connector).
- */
- int (*atomic_get_property)(struct drm_connector *connector,
- const struct drm_connector_state *state,
- struct drm_property *property,
- uint64_t *val);
-};
-
/**
* struct drm_encoder_funcs - encoder controls
*
void (*early_unregister)(struct drm_encoder *encoder);
};
-#define DRM_CONNECTOR_MAX_ENCODER 3
-
/**
* struct drm_encoder - central DRM encoder structure
* @dev: parent DRM device
const struct drm_encoder_helper_funcs *helper_private;
};
-/* should we poll this connector for connects and disconnects */
-/* hot plug detectable */
-#define DRM_CONNECTOR_POLL_HPD (1 << 0)
-/* poll for connections */
-#define DRM_CONNECTOR_POLL_CONNECT (1 << 1)
-/* can cleanly poll for disconnections without flickering the screen */
-/* DACs should rarely do this without a lot of testing */
-#define DRM_CONNECTOR_POLL_DISCONNECT (1 << 2)
-
-#define MAX_ELD_BYTES 128
-
-/**
- * struct drm_connector - central DRM connector control structure
- * @dev: parent DRM device
- * @kdev: kernel device for sysfs attributes
- * @attr: sysfs attributes
- * @head: list management
- * @base: base KMS object
- * @name: human readable name, can be overwritten by the driver
- * @connector_type: one of the DRM_MODE_CONNECTOR_<foo> types from drm_mode.h
- * @connector_type_id: index into connector type enum
- * @interlace_allowed: can this connector handle interlaced modes?
- * @doublescan_allowed: can this connector handle doublescan?
- * @stereo_allowed: can this connector handle stereo modes?
- * @registered: is this connector exposed (registered) with userspace?
- * @modes: modes available on this connector (from fill_modes() + user)
- * @status: one of the drm_connector_status enums (connected, not, or unknown)
- * @probed_modes: list of modes derived directly from the display
- * @display_info: information about attached display (e.g. from EDID)
- * @funcs: connector control functions
- * @edid_blob_ptr: DRM property containing EDID if present
- * @properties: property tracking for this connector
- * @polled: a DRM_CONNECTOR_POLL_<foo> value for core driven polling
- * @dpms: current dpms state
- * @helper_private: mid-layer private data
- * @cmdline_mode: mode line parsed from the kernel cmdline for this connector
- * @force: a DRM_FORCE_<foo> state for forced mode sets
- * @override_edid: has the EDID been overwritten through debugfs for testing?
- * @encoder_ids: valid encoders for this connector
- * @encoder: encoder driving this connector, if any
- * @eld: EDID-like data, if present
- * @dvi_dual: dual link DVI, if found
- * @max_tmds_clock: max clock rate, if found
- * @latency_present: AV delay info from ELD, if found
- * @video_latency: video latency info from ELD, if found
- * @audio_latency: audio latency info from ELD, if found
- * @null_edid_counter: track sinks that give us all zeros for the EDID
- * @bad_edid_counter: track sinks that give us an EDID with invalid checksum
- * @edid_corrupt: indicates whether the last read EDID was corrupt
- * @debugfs_entry: debugfs directory for this connector
- * @state: current atomic state for this connector
- * @has_tile: is this connector connected to a tiled monitor
- * @tile_group: tile group for the connected monitor
- * @tile_is_single_monitor: whether the tile is one monitor housing
- * @num_h_tile: number of horizontal tiles in the tile group
- * @num_v_tile: number of vertical tiles in the tile group
- * @tile_h_loc: horizontal location of this tile
- * @tile_v_loc: vertical location of this tile
- * @tile_h_size: horizontal size of this tile.
- * @tile_v_size: vertical size of this tile.
- *
- * Each connector may be connected to one or more CRTCs, or may be clonable by
- * another connector if they can share a CRTC. Each connector also has a specific
- * position in the broader display (referred to as a 'screen' though it could
- * span multiple monitors).
- */
-struct drm_connector {
- struct drm_device *dev;
- struct device *kdev;
- struct device_attribute *attr;
- struct list_head head;
-
- struct drm_mode_object base;
-
- char *name;
-
- /**
- * @index: Compacted connector index, which matches the position inside
- * the mode_config.list for drivers not supporting hot-add/removing. Can
- * be used as an array index. It is invariant over the lifetime of the
- * connector.
- */
- unsigned index;
-
- int connector_type;
- int connector_type_id;
- bool interlace_allowed;
- bool doublescan_allowed;
- bool stereo_allowed;
- bool registered;
- struct list_head modes; /* list of modes on this connector */
-
- enum drm_connector_status status;
-
- /* these are modes added by probing with DDC or the BIOS */
- struct list_head probed_modes;
-
- struct drm_display_info display_info;
- const struct drm_connector_funcs *funcs;
-
- struct drm_property_blob *edid_blob_ptr;
- struct drm_object_properties properties;
-
- /**
- * @path_blob_ptr:
- *
- * DRM blob property data for the DP MST path property.
- */
- struct drm_property_blob *path_blob_ptr;
-
- /**
- * @tile_blob_ptr:
- *
- * DRM blob property data for the tile property (used mostly by DP MST).
- * This is meant for screens which are driven through separate display
- * pipelines represented by &drm_crtc, which might not be running with
- * genlocked clocks. For tiled panels which are genlocked, like
- * dual-link LVDS or dual-link DSI, the driver should try to not expose
- * the tiling and virtualize both &drm_crtc and &drm_plane if needed.
- */
- struct drm_property_blob *tile_blob_ptr;
-
- uint8_t polled; /* DRM_CONNECTOR_POLL_* */
-
- /* requested DPMS state */
- int dpms;
-
- const struct drm_connector_helper_funcs *helper_private;
-
- /* forced on connector */
- struct drm_cmdline_mode cmdline_mode;
- enum drm_connector_force force;
- bool override_edid;
- uint32_t encoder_ids[DRM_CONNECTOR_MAX_ENCODER];
- struct drm_encoder *encoder; /* currently active encoder */
-
- /* EDID bits */
- uint8_t eld[MAX_ELD_BYTES];
- bool dvi_dual;
- int max_tmds_clock; /* in MHz */
- bool latency_present[2];
- int video_latency[2]; /* [0]: progressive, [1]: interlaced */
- int audio_latency[2];
- int null_edid_counter; /* needed to workaround some HW bugs where we get all 0s */
- unsigned bad_edid_counter;
-
- /* Flag for raw EDID header corruption - used in Displayport
- * compliance testing - * Displayport Link CTS Core 1.2 rev1.1 4.2.2.6
- */
- bool edid_corrupt;
-
- struct dentry *debugfs_entry;
-
- struct drm_connector_state *state;
-
- /* DisplayID bits */
- bool has_tile;
- struct drm_tile_group *tile_group;
- bool tile_is_single_monitor;
-
- uint8_t num_h_tile, num_v_tile;
- uint8_t tile_h_loc, tile_v_loc;
- uint16_t tile_h_size, tile_v_size;
-};
-
/**
* struct drm_plane_state - mutable plane state
* @plane: backpointer to the plane
for_each_if ((encoder_mask) & (1 << drm_encoder_index(encoder)))
#define obj_to_crtc(x) container_of(x, struct drm_crtc, base)
-#define obj_to_connector(x) container_of(x, struct drm_connector, base)
#define obj_to_encoder(x) container_of(x, struct drm_encoder, base)
#define obj_to_mode(x) container_of(x, struct drm_display_mode, base)
#define obj_to_fb(x) container_of(x, struct drm_framebuffer, base)
return 1 << drm_crtc_index(crtc);
}
-int drm_connector_init(struct drm_device *dev,
- struct drm_connector *connector,
- const struct drm_connector_funcs *funcs,
- int connector_type);
-int drm_connector_register(struct drm_connector *connector);
-void drm_connector_unregister(struct drm_connector *connector);
-
-extern void drm_connector_cleanup(struct drm_connector *connector);
-static inline unsigned drm_connector_index(struct drm_connector *connector)
-{
- return connector->index;
-}
-
extern __printf(5, 6)
int drm_encoder_init(struct drm_device *dev,
struct drm_encoder *encoder,
extern void drm_encoder_cleanup(struct drm_encoder *encoder);
-extern const char *drm_get_connector_status_name(enum drm_connector_status status);
-extern const char *drm_get_subpixel_order_name(enum subpixel_order order);
-extern const char *drm_get_dpms_name(int val);
-extern const char *drm_get_dvi_i_subconnector_name(int val);
-extern const char *drm_get_dvi_i_select_name(int val);
-extern const char *drm_get_tv_subconnector_name(int val);
-extern const char *drm_get_tv_select_name(int val);
extern void drm_mode_config_init(struct drm_device *dev);
extern void drm_mode_config_reset(struct drm_device *dev);
extern void drm_mode_config_cleanup(struct drm_device *dev);
-extern int drm_mode_connector_set_path_property(struct drm_connector *connector,
- const char *path);
-int drm_mode_connector_set_tile_property(struct drm_connector *connector);
-extern int drm_mode_connector_update_edid_property(struct drm_connector *connector,
- const struct edid *edid);
-
extern int drm_display_info_set_bus_formats(struct drm_display_info *info,
const u32 *formats,
unsigned int num_formats);
extern void drm_property_destroy(struct drm_device *dev, struct drm_property *property);
extern int drm_property_add_enum(struct drm_property *property, int index,
uint64_t value, const char *name);
-extern int drm_mode_create_dvi_i_properties(struct drm_device *dev);
-extern int drm_mode_create_tv_properties(struct drm_device *dev,
- unsigned int num_modes,
- const char * const modes[]);
-extern int drm_mode_create_scaling_mode_property(struct drm_device *dev);
-extern int drm_mode_create_aspect_ratio_property(struct drm_device *dev);
-extern int drm_mode_create_suggested_offset_properties(struct drm_device *dev);
-
-extern int drm_mode_connector_attach_encoder(struct drm_connector *connector,
- struct drm_encoder *encoder);
extern int drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc,
int gamma_size);
return mo ? obj_to_encoder(mo) : NULL;
}
-/**
- * drm_connector_lookup - lookup connector object
- * @dev: DRM device
- * @id: connector object id
- *
- * This function looks up the connector object specified by id
- * add takes a reference to it.
- */
-static inline struct drm_connector *drm_connector_lookup(struct drm_device *dev,
- uint32_t id)
-{
- struct drm_mode_object *mo;
- mo = drm_mode_object_find(dev, id, DRM_MODE_OBJECT_CONNECTOR);
- return mo ? obj_to_connector(mo) : NULL;
-}
-
static inline struct drm_property *drm_property_find(struct drm_device *dev,
uint32_t id)
{
return clamp_val(val, 0, max);
}
-/**
- * drm_connector_reference - incr the connector refcnt
- * @connector: connector
- *
- * This function increments the connector's refcount.
- */
-static inline void drm_connector_reference(struct drm_connector *connector)
-{
- drm_mode_object_reference(&connector->base);
-}
-
-/**
- * drm_connector_unreference - unref a connector
- * @connector: connector to unref
- *
- * This function decrements the connector's refcount and frees it if it drops to zero.
- */
-static inline void drm_connector_unreference(struct drm_connector *connector)
-{
- drm_mode_object_unreference(&connector->base);
-}
-
/* Plane list iterator for legacy (overlay only) planes. */
#define drm_for_each_legacy_plane(plane, dev) \
list_for_each_entry(plane, &(dev)->mode_config.plane_list, head) \
#define __DRM_MODES_H__
#include <drm/drm_modeset.h>
+#include <drm/drm_connector.h>
/*
* Note on terminology: here, for brevity and convenience, we refer to connector
enum hdmi_picture_aspect picture_aspect_ratio;
};
-/* mode specified on the command line */
-struct drm_cmdline_mode {
- bool specified;
- bool refresh_specified;
- bool bpp_specified;
- int xres, yres;
- int bpp;
- int refresh;
- bool rb;
- bool interlace;
- bool cvt;
- bool margins;
- enum drm_connector_force force;
-};
-
/**
* drm_mode_is_stereo - check for stereo mode flags
* @mode: drm_display_mode to check
#include <linux/kref.h>
struct drm_object_properties;
+struct drm_property;
struct drm_mode_object {
uint32_t id;
void (*free_cb)(struct kref *kref);
};
+#define DRM_OBJECT_MAX_PROPERTY 24
+struct drm_object_properties {
+ int count, atomic_count;
+ /* NOTE: if we ever start dynamically destroying properties (ie.
+ * not at drm_mode_config_cleanup() time), then we'd have to do
+ * a better job of detaching property from mode objects to avoid
+ * dangling property pointers:
+ */
+ struct drm_property *properties[DRM_OBJECT_MAX_PROPERTY];
+ /* do not read/write values directly, but use drm_object_property_get_value()
+ * and drm_object_property_set_value():
+ */
+ uint64_t values[DRM_OBJECT_MAX_PROPERTY];
+};
+
+/* Avoid boilerplate. I'm tired of typing. */
+#define DRM_ENUM_NAME_FN(fnname, list) \
+ const char *fnname(int val) \
+ { \
+ int i; \
+ for (i = 0; i < ARRAY_SIZE(list); i++) { \
+ if (list[i].type == val) \
+ return list[i].name; \
+ } \
+ return "(unknown)"; \
+ }
+
struct drm_mode_object *drm_mode_object_find(struct drm_device *dev,
uint32_t id, uint32_t type);
void drm_mode_object_reference(struct drm_mode_object *obj);
void drm_mode_object_unreference(struct drm_mode_object *obj);
-/* FIXME: This is temporary until we have a drm_connector.h */
-enum drm_connector_force {
- DRM_FORCE_UNSPECIFIED,
- DRM_FORCE_OFF,
- DRM_FORCE_ON, /* force on analog part normally */
- DRM_FORCE_ON_DIGITAL, /* for DVI-I use digital connector */
-};
-
#endif
projects / linux-2.6-block.git / commitdiff