Additional, the display node has to define properties:
- bits-per-pixel: Bits per pixel
- fsl,pcr: LCDC PCR value
+ A display node may optionally define
+ - fsl,aus-mode: boolean to enable AUS mode (only for imx21)
Optional properties:
- lcd-supply: Regulator for LCD supply voltage.
obj-$(CONFIG_HDMI) += hdmi.o
obj-$(CONFIG_VT) += console/
+obj-$(CONFIG_FB_STI) += console/
obj-$(CONFIG_LOGO) += logo/
obj-y += backlight/
config VGA_CONSOLE
bool "VGA text console" if EXPERT || !X86
- depends on !4xx && !8xx && !SPARC && !M68K && !PARISC && !FRV && \
+ depends on !4xx && !PPC_8xx && !SPARC && !M68K && !PARISC && !FRV && \
!SUPERH && !BLACKFIN && !AVR32 && !MN10300 && !CRIS && \
(!ARM || ARCH_FOOTBRIDGE || ARCH_INTEGRATOR || ARCH_NETWINDER) && \
!ARM64 && !ARC && !MICROBLAZE && !OPENRISC
select FB_CFB_FILLRECT
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
- select STI_CONSOLE
- select VT
default y
---help---
STI refers to the HP "Standard Text Interface" which is a set of
#ifdef HAS_VIDC20
#include <mach/acornfb.h>
-#define MAX_SIZE 2*1024*1024
+#define MAX_SIZE (2*1024*1024)
/* VIDC20 has a different set of rules from the VIDC:
* hcr : must be multiple of 4
if (memcmp(¤t_vidc, &vidc, sizeof(vidc))) {
current_vidc = vidc;
- vidc_writel(VIDC20_CTRL| vidc.control);
+ vidc_writel(VIDC20_CTRL | vidc.control);
vidc_writel(0xd0000000 | vidc.pll_ctl);
vidc_writel(0x80000000 | vidc.h_cycle);
vidc_writel(0x81000000 | vidc.h_sync_width);
pal.p = 0;
vidc_writel(0x10000000);
for (i = 0; i < 256; i += 1) {
- pal.vidc20.red = current_par.palette[ i & 31].vidc20.red;
+ pal.vidc20.red = current_par.palette[i & 31].vidc20.red;
pal.vidc20.green = current_par.palette[(i >> 1) & 31].vidc20.green;
pal.vidc20.blue = current_par.palette[(i >> 2) & 31].vidc20.blue;
vidc_writel(pal.p);
base = dma_alloc_wc(current_par.dev, size, &handle,
GFP_KERNEL);
if (base == NULL) {
- printk(KERN_ERR "acornfb: unable to allocate screen "
- "memory\n");
+ printk(KERN_ERR "acornfb: unable to allocate screen memory\n");
return -ENOMEM;
}
v_sync = h_sync / (fb_info.var.yres + fb_info.var.upper_margin +
fb_info.var.lower_margin + fb_info.var.vsync_len);
- printk(KERN_INFO "Acornfb: %dkB %cRAM, %s, using %dx%d, "
- "%d.%03dkHz, %dHz\n",
+ printk(KERN_INFO "Acornfb: %dkB %cRAM, %s, using %dx%d, %d.%03dkHz, %dHz\n",
fb_info.fix.smem_len / 1024,
current_par.using_vram ? 'V' : 'D',
VIDC_NAME, fb_info.var.xres, fb_info.var.yres,
if (err)
return err;
- framesize = fb->panel->mode.xres * fb->panel->mode.yres *
- fb->panel->bpp / 8;
+ framesize = PAGE_ALIGN(fb->panel->mode.xres * fb->panel->mode.yres *
+ fb->panel->bpp / 8);
fb->fb.screen_base = dma_alloc_coherent(&fb->dev->dev, framesize,
&dma, GFP_KERNEL);
if (!fb->fb.screen_base)
err |= sysfs_create_bin_file(&rinfo->pdev->dev.kobj,
&edid2_attr);
if (err)
- pr_warning("%s() Creating sysfs files failed, continuing\n",
- __func__);
+ pr_warn("%s() Creating sysfs files failed, continuing\n",
+ __func__);
/* save current mode regs before we switch into the new one
* so we can restore this upon __exit
for (i = specs->modedb_len + num; i < specs->modedb_len + num + svd_n; i++) {
int idx = svd[i - specs->modedb_len - num];
if (!idx || idx >= ARRAY_SIZE(cea_modes)) {
- pr_warning("Reserved SVD code %d\n", idx);
+ pr_warn("Reserved SVD code %d\n", idx);
} else if (!cea_modes[idx].xres) {
- pr_warning("Unimplemented SVD code %d\n", idx);
+ pr_warn("Unimplemented SVD code %d\n", idx);
} else {
memcpy(&m[i], cea_modes + idx, sizeof(m[i]));
pr_debug("Adding SVD #%d: %ux%u@%u\n", idx,
static int i810fb_cursor(struct fb_info *info, struct fb_cursor *cursor);
static int i810fb_init_pci(struct pci_dev *dev,
const struct pci_device_id *entry);
-static void __exit i810fb_remove_pci(struct pci_dev *dev);
+static void i810fb_remove_pci(struct pci_dev *dev);
static int i810fb_resume(struct pci_dev *dev);
static int i810fb_suspend(struct pci_dev *dev, pm_message_t state);
.name = "i810fb",
.id_table = i810fb_pci_tbl,
.probe = i810fb_init_pci,
- .remove = __exit_p(i810fb_remove_pci),
+ .remove = i810fb_remove_pci,
.suspend = i810fb_suspend,
.resume = i810fb_resume,
};
}
-static void __exit i810fb_remove_pci(struct pci_dev *dev)
+static void i810fb_remove_pci(struct pci_dev *dev)
{
struct fb_info *info = pci_get_drvdata(dev);
struct i810fb_par *par = info->par;
#define IMXFB_LSCR1_DEFAULT 0x00120300
+#define LCDC_LAUSCR 0x80
+#define LAUSCR_AUS_MODE (1<<31)
+
/* Used fb-mode. Can be set on kernel command line, therefore file-static. */
static const char *fb_mode;
dma_addr_t dbar2;
u_int pcr;
+ u_int lauscr;
u_int pwmr;
u_int lscr1;
u_int dmacr;
pcr |= imxfb_mode->pcr & ~(0x3f | (7 << 25));
fbi->pcr = pcr;
+ /*
+ * The LCDC AUS Mode Control Register does not exist on imx1.
+ */
+ if (!is_imx1_fb(fbi) && imxfb_mode->aus_mode)
+ fbi->lauscr = LAUSCR_AUS_MODE;
/*
* Copy the RGB parameters for this display
if (fbi->dmacr)
writel(fbi->dmacr, fbi->regs + LCDC_DMACR);
+ if (fbi->lauscr)
+ writel(fbi->lauscr, fbi->regs + LCDC_LAUSCR);
+
return 0;
}
imxfb_mode->bpp = bpp;
imxfb_mode->pcr = pcr;
+ /*
+ * fsl,aus-mode is optional
+ */
+ imxfb_mode->aus_mode = of_property_read_bool(np, "fsl,aus-mode");
+
return 0;
}
{
unsigned long wait = md->hw_guard_end - jiffies;
- if ((long)wait > 0 && wait <= md->hw_guard_wait) {
+ if ((long)wait > 0 && time_before_eq(wait, md->hw_guard_wait)) {
set_current_state(TASK_UNINTERRUPTIBLE);
schedule_timeout(wait);
}
return 0;
}
+static void dss_uninit_ports(struct platform_device *pdev);
+
static int dss_init_ports(struct platform_device *pdev)
{
struct device_node *parent = pdev->dev.of_node;
struct device_node *port;
- int r;
+ int r, ret = 0;
if (parent == NULL)
return 0;
switch (port_type) {
case OMAP_DISPLAY_TYPE_DPI:
- dpi_init_port(pdev, port);
+ ret = dpi_init_port(pdev, port);
break;
case OMAP_DISPLAY_TYPE_SDI:
- sdi_init_port(pdev, port);
+ ret = sdi_init_port(pdev, port);
break;
default:
break;
}
- } while ((port = omapdss_of_get_next_port(parent, port)) != NULL);
+ } while (!ret &&
+ (port = omapdss_of_get_next_port(parent, port)) != NULL);
- return 0;
+ if (ret)
+ dss_uninit_ports(pdev);
+
+ return ret;
}
static void dss_uninit_ports(struct platform_device *pdev)
return err;
}
-static int __exit pmagaafb_remove(struct device *dev)
+static int pmagaafb_remove(struct device *dev)
{
struct tc_dev *tdev = to_tc_dev(dev);
struct fb_info *info = dev_get_drvdata(dev);
.name = "pmagaafb",
.bus = &tc_bus_type,
.probe = pmagaafb_probe,
- .remove = __exit_p(pmagaafb_remove),
+ .remove = pmagaafb_remove,
},
};
return err;
}
-static int __exit pmagbafb_remove(struct device *dev)
+static int pmagbafb_remove(struct device *dev)
{
struct tc_dev *tdev = to_tc_dev(dev);
struct fb_info *info = dev_get_drvdata(dev);
.name = "pmagbafb",
.bus = &tc_bus_type,
.probe = pmagbafb_probe,
- .remove = __exit_p(pmagbafb_remove),
+ .remove = pmagbafb_remove,
},
};
return err;
}
-static int __exit pmagbbfb_remove(struct device *dev)
+static int pmagbbfb_remove(struct device *dev)
{
struct tc_dev *tdev = to_tc_dev(dev);
struct fb_info *info = dev_get_drvdata(dev);
.name = "pmagbbfb",
.bus = &tc_bus_type,
.probe = pmagbbfb_probe,
- .remove = __exit_p(pmagbbfb_remove),
+ .remove = pmagbbfb_remove,
},
};
lcd_writel(ofb->fbi, FBR1, ofb->fbi->fdadr[DMA_OV1] | 0x3);
if (wait_for_completion_timeout(&ofb->branch_done, 1 * HZ) == 0)
- pr_warning("%s: timeout disabling overlay1\n", __func__);
+ pr_warn("%s: timeout disabling overlay1\n", __func__);
lcd_writel(ofb->fbi, LCCR5, lccr5);
}
lcd_writel(ofb->fbi, FBR4, ofb->fbi->fdadr[DMA_OV2_Cr] | 0x3);
if (wait_for_completion_timeout(&ofb->branch_done, 1 * HZ) == 0)
- pr_warning("%s: timeout disabling overlay2\n", __func__);
+ pr_warn("%s: timeout disabling overlay2\n", __func__);
}
static struct pxafb_layer_ops ofb_ops[] = {
lcd_writel(fbi, LCCR0, fbi->reg_lccr0 | LCCR0_ENB);
if (wait_for_completion_timeout(&fbi->command_done, HZ/2) == 0) {
- pr_warning("%s: timeout waiting for command done\n",
- __func__);
+ pr_warn("%s: timeout waiting for command done\n", __func__);
ret = -ETIMEDOUT;
}
info->fbmem = ioremap(res->start, resource_size(res));
if (info->fbmem == NULL) {
dev_err(dev, "cannot remap framebuffer\n");
+ ret = -ENXIO;
goto err_mem_res;
}
static int dlfb_select_std_channel(struct dlfb_data *dev)
{
int ret;
- u8 set_def_chn[] = { 0x57, 0xCD, 0xDC, 0xA7,
+ void *buf;
+ static const u8 set_def_chn[] = {
+ 0x57, 0xCD, 0xDC, 0xA7,
0x1C, 0x88, 0x5E, 0x15,
0x60, 0xFE, 0xC6, 0x97,
0x16, 0x3D, 0x47, 0xF2 };
+ buf = kmemdup(set_def_chn, sizeof(set_def_chn), GFP_KERNEL);
+
+ if (!buf)
+ return -ENOMEM;
+
ret = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0),
NR_USB_REQUEST_CHANNEL,
(USB_DIR_OUT | USB_TYPE_VENDOR), 0, 0,
- set_def_chn, sizeof(set_def_chn), USB_CTRL_SET_TIMEOUT);
+ buf, sizeof(set_def_chn), USB_CTRL_SET_TIMEOUT);
+
+ kfree(buf);
+
return ret;
}
* frame buffer.
*/
+#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
+
#include <linux/console.h>
#include <linux/kernel.h>
#include <linux/errno.h>
video[KPARAM_MEM] = val;
}
+ video[KPARAM_WIDTH] = xenbus_read_unsigned(dev->otherend, "width",
+ video[KPARAM_WIDTH]);
+ video[KPARAM_HEIGHT] = xenbus_read_unsigned(dev->otherend, "height",
+ video[KPARAM_HEIGHT]);
+
/* If requested res does not fit in available memory, use default */
fb_size = video[KPARAM_MEM] * 1024 * 1024;
if (video[KPARAM_WIDTH] * video[KPARAM_HEIGHT] * XENFB_DEPTH / 8
> fb_size) {
+ pr_warn("display parameters %d,%d,%d invalid, use defaults\n",
+ video[KPARAM_MEM], video[KPARAM_WIDTH],
+ video[KPARAM_HEIGHT]);
video[KPARAM_WIDTH] = XENFB_WIDTH;
video[KPARAM_HEIGHT] = XENFB_HEIGHT;
fb_size = XENFB_DEFAULT_FB_LEN;
return 0;
}
-late_initcall(fb_logo_late_init);
+late_initcall_sync(fb_logo_late_init);
/* logo's are marked __initdata. Use __ref to tell
* modpost that it is intended that this function uses data
struct imx_fb_videomode {
struct fb_videomode mode;
u32 pcr;
+ bool aus_mode;
unsigned char bpp;
};
projects / linux-2.6-block.git / commitdiff