ARM: dts: dra7: Fix NAND device nodes
authorRoger Quadros <rogerq@ti.com>
Tue, 23 Feb 2016 16:37:17 +0000 (18:37 +0200)
committerTony Lindgren <tony@atomide.com>
Fri, 26 Feb 2016 18:12:45 +0000 (10:12 -0800)
Add compatible id, GPMC register resource and interrupt
resource to NAND controller nodes.

The GPMC node will provide an interrupt controller for the
NAND IRQs.

Signed-off-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
arch/arm/boot/dts/dra7-evm.dts
arch/arm/boot/dts/dra7.dtsi
arch/arm/boot/dts/dra72-evm.dts

index cfc24e52244e1b8b12f7d2e939458831df9173fe..28ae95ee0c35d616d59f550c6221a11c7c811570 100644 (file)
        status = "okay";
        pinctrl-names = "default";
        pinctrl-0 = <&nand_flash_x16>;
-       ranges = <0 0 0 0x01000000>;    /* minimum GPMC partition = 16MB */
+       ranges = <0 0 0x08000000 0x01000000>;   /* minimum GPMC partition = 16MB */
        nand@0,0 {
+               compatible = "ti,omap2-nand";
                reg = <0 0 4>;          /* device IO registers */
+               interrupt-parent = <&gpmc>;
+               interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+                            <1 IRQ_TYPE_NONE>; /* termcount */
                ti,nand-ecc-opt = "bch8";
                ti,elm-id = <&elm>;
                nand-bus-width = <16>;
index c4d9175b90dceab5aa64ca1973505652bf325bee..51ddc981b00b9dc50d2063703e4fba9d80116f98 100644 (file)
                        gpmc,num-waitpins = <2>;
                        #address-cells = <2>;
                        #size-cells = <1>;
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
                        status = "disabled";
                };
 
index 00b12002c07c064df61c029cfa1ab9f97ba25323..6cf211bccd317856d27777835ef0ef5c73c5d2f8 100644 (file)
        status = "okay";
        pinctrl-names = "default";
        pinctrl-0 = <&nand_default>;
-       ranges = <0 0 0 0x01000000>;    /* minimum GPMC partition = 16MB */
+       ranges = <0 0 0x08000000 0x01000000>;   /* minimum GPMC partition = 16MB */
        nand@0,0 {
                /* To use NAND, DIP switch SW5 must be set like so:
                 * SW5.1 (NAND_SELn) = ON (LOW)
                 * SW5.9 (GPMC_WPN) = OFF (HIGH)
                 */
+               compatible = "ti,omap2-nand";
                reg = <0 0 4>;          /* device IO registers */
+               interrupt-parent = <&gpmc>;
+               interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
+                            <1 IRQ_TYPE_NONE>; /* termcount */
                ti,nand-ecc-opt = "bch8";
                ti,elm-id = <&elm>;
                nand-bus-width = <16>;