#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.31-rc3
-# Thu Jul 16 23:36:10 2009
+# Linux kernel version: 2.6.32-rc5
+# Sat Oct 17 23:32:24 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
+CONFIG_HAVE_TCM=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_STACKTRACE_SUPPORT=y
CONFIG_HAVE_LATENCYTOP_SUPPORT=y
#
# RCU Subsystem
#
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
+CONFIG_TREE_RCU=y
+# CONFIG_TREE_PREEMPT_RCU is not set
+# CONFIG_RCU_TRACE is not set
+CONFIG_RCU_FANOUT=32
+# CONFIG_RCU_FANOUT_EXACT is not set
# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
# CONFIG_AIO is not set
#
-# Performance Counters
+# Kernel Performance Events And Counters
#
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
-# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_KPROBES=y
#
# System Type
#
+CONFIG_MMU=y
# CONFIG_ARCH_AAEC2000 is not set
# CONFIG_ARCH_INTEGRATOR is not set
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_STMP3XXX is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_NOMADIK is not set
# CONFIG_ARCH_IOP13XX is not set
# CONFIG_ARCH_IOP32X is not set
# CONFIG_ARCH_IOP33X is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_S5PC1XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
CONFIG_ARCH_U300=y
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_BCMRING is not set
#
# ST-Ericsson AB U300/U330/U335/U365 Platform
CONFIG_MACH_U300_DUAL_RAM=y
CONFIG_U300_DEBUG=y
# CONFIG_MACH_U300_SEMI_IS_SHARED is not set
+CONFIG_MACH_U300_SPIDUMMY=y
#
# All the settings below must match the bootloader's settings
CONFIG_CPU_ARM926T=y
CONFIG_CPU_32v5=y
CONFIG_CPU_ABRT_EV5TJ=y
-CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_PABRT_LEGACY=y
CONFIG_CPU_CACHE_VIVT=y
CONFIG_CPU_COPY_V4WB=y
CONFIG_CPU_TLB_V4WBI=y
# CONFIG_CPU_DCACHE_DISABLE is not set
# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+CONFIG_ARM_L1_CACHE_SHIFT=5
CONFIG_ARM_VIC=y
CONFIG_ARM_VIC_NR=2
CONFIG_COMMON_CLKDEV=y
# CONFIG_VMSPLIT_2G is not set
# CONFIG_VMSPLIT_1G is not set
CONFIG_PAGE_OFFSET=0xC0000000
+# CONFIG_PREEMPT_NONE is not set
+# CONFIG_PREEMPT_VOLUNTARY is not set
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_VIRT_TO_BUS=y
CONFIG_HAVE_MLOCK=y
CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+# CONFIG_KSM is not set
CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
CONFIG_ALIGNMENT_TRAP=y
# CONFIG_UACCESS_WITH_MEMCPY is not set
# CONFIG_PM_DEBUG is not set
# CONFIG_SUSPEND is not set
# CONFIG_APM_EMULATION is not set
+# CONFIG_PM_RUNTIME is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
# CONFIG_IP_SCTP is not set
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
# Generic Driver Options
#
CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_DEVTMPFS is not set
CONFIG_STANDALONE=y
# CONFIG_PREVENT_FIRMWARE_BUILD is not set
CONFIG_FW_LOADER=y
# CONFIG_CONNECTOR is not set
CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
#
# CONFIG_MTD_DATAFLASH is not set
# CONFIG_MTD_M25P80 is not set
+# CONFIG_MTD_SST25L is not set
# CONFIG_MTD_SLRAM is not set
# CONFIG_MTD_PHRAM is not set
# CONFIG_MTD_MTDRAM is not set
# CONFIG_MD is not set
# CONFIG_NETDEVICES is not set
# CONFIG_ISDN is not set
+# CONFIG_PHONE is not set
#
# Input device support
# Input Device Drivers
#
CONFIG_INPUT_KEYBOARD=y
+# CONFIG_KEYBOARD_ADP5588 is not set
# CONFIG_KEYBOARD_ATKBD is not set
+# CONFIG_QT2160 is not set
# CONFIG_KEYBOARD_LKKBD is not set
# CONFIG_KEYBOARD_GPIO is not set
# CONFIG_KEYBOARD_MATRIX is not set
# CONFIG_KEYBOARD_LM8323 is not set
+# CONFIG_KEYBOARD_MAX7359 is not set
# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_OPENCORES is not set
# CONFIG_KEYBOARD_STOWAWAY is not set
# CONFIG_KEYBOARD_SUNKBD is not set
# CONFIG_KEYBOARD_XTKBD is not set
# CONFIG_TCG_TPM is not set
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_COMPAT=y
# CONFIG_I2C_CHARDEV is not set
CONFIG_I2C_HELPER_AUTO=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_PCF8574 is not set
-# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
# CONFIG_I2C_DEBUG_ALGO is not set
#
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
# CONFIG_W1 is not set
CONFIG_POWER_SUPPLY=y
# CONFIG_POWER_SUPPLY_DEBUG is not set
# CONFIG_PDA_POWER is not set
# CONFIG_BATTERY_DS2760 is not set
+# CONFIG_BATTERY_DS2782 is not set
# CONFIG_BATTERY_BQ27x00 is not set
# CONFIG_BATTERY_MAX17040 is not set
# CONFIG_HWMON is not set
# CONFIG_THERMAL is not set
-# CONFIG_THERMAL_HWMON is not set
CONFIG_WATCHDOG=y
# CONFIG_WATCHDOG_NOWAYOUT is not set
# CONFIG_MFD_TC6387XB is not set
# CONFIG_PMIC_DA903X is not set
# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM831X is not set
# CONFIG_MFD_WM8350_I2C is not set
# CONFIG_MFD_PCF50633 is not set
+# CONFIG_MFD_MC13783 is not set
CONFIG_AB3100_CORE=y
+CONFIG_AB3100_OTP=y
# CONFIG_EZX_PCAP is not set
+CONFIG_REGULATOR=y
+# CONFIG_REGULATOR_DEBUG is not set
+# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
+# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
+# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
+# CONFIG_REGULATOR_BQ24022 is not set
+# CONFIG_REGULATOR_MAX1586 is not set
+# CONFIG_REGULATOR_LP3971 is not set
+CONFIG_REGULATOR_AB3100=y
+# CONFIG_REGULATOR_TPS65023 is not set
+# CONFIG_REGULATOR_TPS6507X is not set
# CONFIG_MEDIA_SUPPORT is not set
#
#
CONFIG_MMC_ARMMMCI=y
# CONFIG_MMC_SDHCI is not set
+# CONFIG_MMC_AT91 is not set
+# CONFIG_MMC_ATMELMCI is not set
# CONFIG_MMC_SPI is not set
# CONFIG_MEMSTICK is not set
-# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# iptables trigger is under Netfilter config (LED target)
#
+# CONFIG_ACCESSIBILITY is not set
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
-CONFIG_RTC_HCTOSYS=y
-CONFIG_RTC_HCTOSYS_DEVICE="rtc0"
+# CONFIG_RTC_HCTOSYS is not set
# CONFIG_RTC_DEBUG is not set
#
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
# CONFIG_RTC_DRV_DS3234 is not set
+# CONFIG_RTC_DRV_PCF2123 is not set
#
# Platform RTC drivers
# CONFIG_RTC_DRV_M48T59 is not set
# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
+CONFIG_RTC_DRV_AB3100=y
#
# on-CPU RTC drivers
#
# CONFIG_RTC_DRV_PL030 is not set
# CONFIG_RTC_DRV_PL031 is not set
+CONFIG_RTC_DRV_COH901331=y
CONFIG_DMADEVICES=y
#
# DMA Devices
#
# CONFIG_AUXDISPLAY is not set
-CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_REGULATOR_MAX1586 is not set
-# CONFIG_REGULATOR_LP3971 is not set
# CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
# CONFIG_STAGING is not set
#
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
# CONFIG_BTRFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_FILE_LOCKING=y
CONFIG_FSNOTIFY=y
# CONFIG_DNOTIFY is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
-# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
#
CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
# CONFIG_HEADERS_CHECK is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_DEBUG_CREDENTIALS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
# CONFIG_CRC32 is not set
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
+CONFIG_GENERIC_ALLOCATOR=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int);
#define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(&(ex), stk)
+int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs);
+#define ELF_CORE_COPY_TASK_REGS dump_task_regs
+
#define USE_ELF_CORE_DUMP
#define ELF_EXEC_PAGESIZE 4096
if (tlb_flag(TLB_WB))
dsb();
- if (cpumask_test_cpu(smp_processor_id(), mm_cpumask(mm))) {
+ if (cpumask_test_cpu(get_cpu(), mm_cpumask(mm))) {
if (tlb_flag(TLB_V3_FULL))
asm("mcr p15, 0, %0, c6, c0, 0" : : "r" (zero) : "cc");
if (tlb_flag(TLB_V4_U_FULL))
if (tlb_flag(TLB_V4_I_FULL))
asm("mcr p15, 0, %0, c8, c5, 0" : : "r" (zero) : "cc");
}
+ put_cpu();
if (tlb_flag(TLB_V6_U_ASID))
asm("mcr p15, 0, %0, c8, c7, 2" : : "r" (asid) : "cc");
THUMB( add pc, r8 )
nop
- W(mov) pc, lr @ CP#0
+ movw_pc lr @ CP#0
W(b) do_fpe @ CP#1 (FPE)
W(b) do_fpe @ CP#2 (FPE)
- W(mov) pc, lr @ CP#3
+ movw_pc lr @ CP#3
#ifdef CONFIG_CRUNCH
b crunch_task_enable @ CP#4 (MaverickCrunch)
b crunch_task_enable @ CP#5 (MaverickCrunch)
b crunch_task_enable @ CP#6 (MaverickCrunch)
#else
- W(mov) pc, lr @ CP#4
- W(mov) pc, lr @ CP#5
- W(mov) pc, lr @ CP#6
+ movw_pc lr @ CP#4
+ movw_pc lr @ CP#5
+ movw_pc lr @ CP#6
#endif
- W(mov) pc, lr @ CP#7
- W(mov) pc, lr @ CP#8
- W(mov) pc, lr @ CP#9
+ movw_pc lr @ CP#7
+ movw_pc lr @ CP#8
+ movw_pc lr @ CP#9
#ifdef CONFIG_VFP
W(b) do_vfp @ CP#10 (VFP)
W(b) do_vfp @ CP#11 (VFP)
#else
- W(mov) pc, lr @ CP#10 (VFP)
- W(mov) pc, lr @ CP#11 (VFP)
+ movw_pc lr @ CP#10 (VFP)
+ movw_pc lr @ CP#11 (VFP)
#endif
- W(mov) pc, lr @ CP#12
- W(mov) pc, lr @ CP#13
- W(mov) pc, lr @ CP#14 (Debug)
- W(mov) pc, lr @ CP#15 (Control)
+ movw_pc lr @ CP#12
+ movw_pc lr @ CP#13
+ movw_pc lr @ CP#14 (Debug)
+ movw_pc lr @ CP#15 (Control)
#ifdef CONFIG_NEON
.align 6
mov \rd, sp, lsr #13
mov \rd, \rd, lsl #13
.endm
+
+ @
+ @ 32-bit wide "mov pc, reg"
+ @
+ .macro movw_pc, reg
+ mov pc, \reg
+ .endm
#else /* CONFIG_THUMB2_KERNEL */
.macro svc_exit, rpsr
clrex @ clear the exclusive monitor
lsr \rd, \rd, #13
mov \rd, \rd, lsl #13
.endm
+
+ @
+ @ 32-bit wide "mov pc, reg"
+ @
+ .macro movw_pc, reg
+ mov pc, \reg
+ nop
+ .endm
#endif /* !CONFIG_THUMB2_KERNEL */
/*
return 0;
}
+/*
+ * Fill in the task's elfregs structure for a core dump.
+ */
+int dump_task_regs(struct task_struct *t, elf_gregset_t *elfregs)
+{
+ elf_core_copy_regs(elfregs, task_pt_regs(t));
+ return 1;
+}
+
/*
* fill in the fpe structure for a core dump...
*/
* Watchdog
* -------------------------------------------------------------------- */
-#if defined(CONFIG_AT91SAM9_WATCHDOG) || defined(CONFIG_AT91SAM9_WATCHDOG_MODULE)
+#if defined(CONFIG_AT91SAM9X_WATCHDOG) || defined(CONFIG_AT91SAM9X_WATCHDOG_MODULE)
static struct platform_device at91sam9g45_wdt_device = {
.name = "at91_wdt",
.id = -1,
for (i = 0; i < 8; i++) {
if (status & (1 << i)) {
int gpio_irq = gpio_to_irq(EP93XX_GPIO_LINE_B(0)) + i;
- desc = irq_desc + gpio_irq;
generic_handle_irq(gpio_irq);
}
}
ARRAY_SIZE(edb93xxa_i2c_board_info));
} else if (machine_is_edb9307() || machine_is_edb9312() ||
machine_is_edb9315()) {
- ep93xx_register_i2c(&edb93xx_i2c_gpio_data
+ ep93xx_register_i2c(&edb93xx_i2c_gpio_data,
edb93xx_i2c_board_info,
ARRAY_SIZE(edb93xx_i2c_board_info));
}
void ep93xx_map_io(void);
void ep93xx_init_irq(void);
-void ep93xx_init_time(unsigned long);
/* EP93xx System Controller software locked register write */
void ep93xx_syscon_swlocked_write(unsigned int val, void __iomem *reg);
_REGISTER_CLOCK("mxc-mmc.0", NULL, sdhc1_clk)
_REGISTER_CLOCK("mxc-mmc.1", NULL, sdhc2_clk)
_REGISTER_CLOCK("mxc-mmc.2", NULL, sdhc3_clk)
- _REGISTER_CLOCK(NULL, "cspi1", cspi1_clk)
- _REGISTER_CLOCK(NULL, "cspi2", cspi2_clk)
- _REGISTER_CLOCK(NULL, "cspi3", cspi3_clk)
+ _REGISTER_CLOCK("spi_imx.0", NULL, cspi1_clk)
+ _REGISTER_CLOCK("spi_imx.1", NULL, cspi2_clk)
+ _REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
_REGISTER_CLOCK("imx-fb.0", NULL, lcdc_clk)
_REGISTER_CLOCK(NULL, "csi", csi_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb", usb_clk)
_REGISTER_CLOCK(NULL, "sahara2", sahara2_clk)
_REGISTER_CLOCK(NULL, "ata", ata_clk)
_REGISTER_CLOCK(NULL, "mstick", mstick_clk)
- _REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+ _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
_REGISTER_CLOCK(NULL, "gpio", gpio_clk)
_REGISTER_CLOCK("imx-i2c.0", NULL, i2c1_clk)
_REGISTER_CLOCK("imx-i2c.1", NULL, i2c2_clk)
#include <linux/mtd/plat-ram.h>
#include <linux/mtd/physmap.h>
#include <linux/platform_device.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/mc13783.h>
+#include <linux/spi/spi.h>
+#include <linux/irq.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <mach/iomux.h>
#include <mach/imx-uart.h>
#include <mach/mxc_nand.h>
+#include <mach/spi.h>
#include "devices.h"
PC6_PF_I2C2_SCL,
/* SPI1 */
PD25_PF_CSPI1_RDY,
- PD27_PF_CSPI1_SS1,
- PD28_PF_CSPI1_SS0,
PD29_PF_CSPI1_SCLK,
PD30_PF_CSPI1_MISO,
PD31_PF_CSPI1_MOSI,
}
};
+static int pcm038_spi_cs[] = {GPIO_PORTD + 28};
+
+static struct spi_imx_master pcm038_spi_0_data = {
+ .chipselect = pcm038_spi_cs,
+ .num_chipselect = ARRAY_SIZE(pcm038_spi_cs),
+};
+
+static struct regulator_consumer_supply sdhc1_consumers[] = {
+ {
+ .dev = &mxc_sdhc_device1.dev,
+ .supply = "sdhc_vcc",
+ },
+};
+
+static struct regulator_init_data sdhc1_data = {
+ .constraints = {
+ .min_uV = 3000000,
+ .max_uV = 3400000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL |
+ REGULATOR_MODE_FAST,
+ .always_on = 0,
+ .boot_on = 0,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(sdhc1_consumers),
+ .consumer_supplies = sdhc1_consumers,
+};
+
+static struct regulator_consumer_supply cam_consumers[] = {
+ {
+ .dev = NULL,
+ .supply = "imx_cam_vcc",
+ },
+};
+
+static struct regulator_init_data cam_data = {
+ .constraints = {
+ .min_uV = 3000000,
+ .max_uV = 3400000,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_MODE | REGULATOR_CHANGE_STATUS,
+ .valid_modes_mask = REGULATOR_MODE_NORMAL |
+ REGULATOR_MODE_FAST,
+ .always_on = 0,
+ .boot_on = 0,
+ },
+ .num_consumer_supplies = ARRAY_SIZE(cam_consumers),
+ .consumer_supplies = cam_consumers,
+};
+
+struct mc13783_regulator_init_data pcm038_regulators[] = {
+ {
+ .id = MC13783_REGU_VCAM,
+ .init_data = &cam_data,
+ }, {
+ .id = MC13783_REGU_VMMC1,
+ .init_data = &sdhc1_data,
+ },
+};
+
+static struct mc13783_platform_data pcm038_pmic = {
+ .regulators = pcm038_regulators,
+ .num_regulators = ARRAY_SIZE(pcm038_regulators),
+ .flags = MC13783_USE_ADC | MC13783_USE_REGULATOR |
+ MC13783_USE_TOUCHSCREEN,
+};
+
+static struct spi_board_info pcm038_spi_board_info[] __initdata = {
+ {
+ .modalias = "mc13783",
+ .irq = IRQ_GPIOB(23),
+ .max_speed_hz = 300000,
+ .bus_num = 0,
+ .chip_select = 0,
+ .platform_data = &pcm038_pmic,
+ .mode = SPI_CS_HIGH,
+ }
+};
+
static void __init pcm038_init(void)
{
mxc_gpio_setup_multiple_pins(pcm038_pins, ARRAY_SIZE(pcm038_pins),
/* PE18 for user-LED D40 */
mxc_gpio_mode(GPIO_PORTE | 18 | GPIO_GPIO | GPIO_OUT);
+ mxc_gpio_mode(GPIO_PORTD | 28 | GPIO_GPIO | GPIO_OUT);
+
+ /* MC13783 IRQ */
+ mxc_gpio_mode(GPIO_PORTB | 23 | GPIO_GPIO | GPIO_IN);
+
+ mxc_register_device(&mxc_spi_device0, &pcm038_spi_0_data);
+ spi_register_board_info(pcm038_spi_board_info,
+ ARRAY_SIZE(pcm038_spi_board_info));
+
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
#ifdef CONFIG_MACH_PCM970_BASEBOARD
PB7_PF_SD2_D3,
PB8_PF_SD2_CMD,
PB9_PF_SD2_CLK,
- GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN, /* card detect */
/* display */
PA5_PF_LSCLK,
PA6_PF_LD0,
"PCM970");
mxc_register_device(&mxc_fb_device, &pcm038_fb_data);
+ mxc_gpio_mode(GPIO_PORTC | 28 | GPIO_GPIO | GPIO_IN);
mxc_register_device(&mxc_sdhc_device1, &sdhc_pdata);
platform_device_register(&pcm970_sja1000);
}
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
#include <linux/platform_device.h>
+#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <mach/mx25.h>
#include <mach/irqs.h>
+/*
+ * Copyright 2009 Sascha Hauer, <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ * Boston, MA 02110-1301, USA.
+ */
+
#include <linux/types.h>
#include <linux/init.h>
#include <linux/clk.h>
.flags = IMXUART_HAVE_RTSCTS,
};
-static struct mxc_nand_platform_data nand_board_info = {
- .width = 1,
- .hw_ecc = 1,
-};
-
static void __init mx25pdk_init(void)
{
mxc_register_device(&mxc_uart_device0, &uart_pdata);
mxc_register_device(&mxc_usbh2, NULL);
- mxc_register_device(&mxc_nand_device, &nand_board_info);
}
-
static void __init mx25pdk_timer_init(void)
{
mx25_clocks_init(26000000);
_REGISTER_CLOCK("mxc-ehci.1", "usb", usbotg_clk)
_REGISTER_CLOCK("mxc-ehci.2", "usb", usbotg_clk)
_REGISTER_CLOCK("fsl-usb2-udc", "usb", usbotg_clk)
- _REGISTER_CLOCK("mxc_wdt.0", NULL, wdog_clk)
+ _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
_REGISTER_CLOCK(NULL, "max", max_clk)
_REGISTER_CLOCK(NULL, "admux", admux_clk)
_REGISTER_CLOCK(NULL, "csi", csi_clk)
_REGISTER_CLOCK("spi_imx.2", NULL, cspi3_clk)
_REGISTER_CLOCK(NULL, "gpt", gpt_clk)
_REGISTER_CLOCK(NULL, "pwm", pwm_clk)
- _REGISTER_CLOCK(NULL, "wdog", wdog_clk)
+ _REGISTER_CLOCK("imx-wdt.0", NULL, wdog_clk)
_REGISTER_CLOCK(NULL, "rtc", rtc_clk)
_REGISTER_CLOCK(NULL, "epit", epit1_clk)
_REGISTER_CLOCK(NULL, "epit", epit2_clk)
* SPI master controller
* 3 channels
*/
-static struct resource imx_spi_0_resources[] = {
+static struct resource mxc_spi_0_resources[] = {
{
.start = CSPI1_BASE_ADDR,
.end = CSPI1_BASE_ADDR + SZ_4K - 1,
},
};
-static struct resource imx_spi_1_resources[] = {
+static struct resource mxc_spi_1_resources[] = {
{
.start = CSPI2_BASE_ADDR,
.end = CSPI2_BASE_ADDR + SZ_4K - 1,
},
};
-static struct resource imx_spi_2_resources[] = {
+static struct resource mxc_spi_2_resources[] = {
{
.start = CSPI3_BASE_ADDR,
.end = CSPI3_BASE_ADDR + SZ_4K - 1,
},
};
-struct platform_device imx_spi_device0 = {
+struct platform_device mxc_spi_device0 = {
.name = "spi_imx",
.id = 0,
- .num_resources = ARRAY_SIZE(imx_spi_0_resources),
- .resource = imx_spi_0_resources,
+ .num_resources = ARRAY_SIZE(mxc_spi_0_resources),
+ .resource = mxc_spi_0_resources,
};
-struct platform_device imx_spi_device1 = {
+struct platform_device mxc_spi_device1 = {
.name = "spi_imx",
.id = 1,
- .num_resources = ARRAY_SIZE(imx_spi_1_resources),
- .resource = imx_spi_1_resources,
+ .num_resources = ARRAY_SIZE(mxc_spi_1_resources),
+ .resource = mxc_spi_1_resources,
};
-struct platform_device imx_spi_device2 = {
+struct platform_device mxc_spi_device2 = {
.name = "spi_imx",
.id = 2,
- .num_resources = ARRAY_SIZE(imx_spi_2_resources),
- .resource = imx_spi_2_resources,
+ .num_resources = ARRAY_SIZE(mxc_spi_2_resources),
+ .resource = mxc_spi_2_resources,
};
#ifdef CONFIG_ARCH_MX35
extern struct platform_device mxc_usbh1;
extern struct platform_device mxc_usbh2;
extern struct platform_device mxc_rnga_device;
-extern struct platform_device imx_spi_device0;
-extern struct platform_device imx_spi_device1;
-extern struct platform_device imx_spi_device2;
+extern struct platform_device mxc_spi_device0;
+extern struct platform_device mxc_spi_device1;
+extern struct platform_device mxc_spi_device2;
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
+#ifdef CONFIG_ARCH_MX35
void __init mx35_map_io(void)
{
mxc_set_cpu_type(MXC_CPU_MX35);
iotable_init(mxc_io_desc, ARRAY_SIZE(mxc_io_desc));
}
+#endif
void __init mx31_init_irq(void)
{
#define CM_X300_ETH_PHYS 0x08000010
-#define GPIO82_MMC2_IRQ (82)
-#define GPIO85_MMC2_WP (85)
+#define GPIO82_MMC_IRQ (82)
+#define GPIO85_MMC_WP (85)
-#define CM_X300_MMC2_IRQ IRQ_GPIO(GPIO82_MMC2_IRQ)
+#define CM_X300_MMC_IRQ IRQ_GPIO(GPIO82_MMC_IRQ)
#define GPIO95_RTC_CS (95)
#define GPIO96_RTC_WR (96)
#endif
#if defined(CONFIG_MMC) || defined(CONFIG_MMC_MODULE)
-/* The first MMC slot of CM-X300 is hardwired to Libertas card and has
+static struct pxamci_platform_data cm_x300_mci_platform_data = {
+ .detect_delay = 20,
+ .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
+ .gpio_card_detect = GPIO82_MMC_IRQ,
+ .gpio_card_ro = GPIO85_MMC_WP,
+ .gpio_power = -1,
+};
+
+/* The second MMC slot of CM-X300 is hardwired to Libertas card and has
no detection/ro pins */
-static int cm_x300_mci_init(struct device *dev,
- irq_handler_t cm_x300_detect_int,
- void *data)
+static int cm_x300_mci2_init(struct device *dev,
+ irq_handler_t cm_x300_detect_int,
+ void *data)
{
return 0;
}
-static void cm_x300_mci_exit(struct device *dev, void *data)
+static void cm_x300_mci2_exit(struct device *dev, void *data)
{
}
-static struct pxamci_platform_data cm_x300_mci_platform_data = {
+static struct pxamci_platform_data cm_x300_mci2_platform_data = {
.detect_delay = 20,
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .init = cm_x300_mci_init,
- .exit = cm_x300_mci_exit,
+ .init = cm_x300_mci2_init,
+ .exit = cm_x300_mci2_exit,
.gpio_card_detect = -1,
.gpio_card_ro = -1,
.gpio_power = -1,
};
-static struct pxamci_platform_data cm_x300_mci2_platform_data = {
- .detect_delay = 20,
- .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
- .gpio_card_detect = GPIO82_MMC2_IRQ,
- .gpio_card_ro = GPIO85_MMC2_WP,
- .gpio_power = -1,
-};
-
static void __init cm_x300_init_mmc(void)
{
pxa_set_mci_info(&cm_x300_mci_platform_data);
#include <linux/kernel.h>
#include <linux/platform_device.h>
#include <linux/delay.h>
+#include <linux/gpio_keys.h>
#include <linux/gpio.h>
#include <linux/leds.h>
#include <linux/mtd/physmap.h>
};
+static struct gpio_keys_button spitz_gpio_keys[] = {
+ {
+ .type = EV_PWR,
+ .code = KEY_SUSPEND,
+ .gpio = SPITZ_GPIO_ON_KEY,
+ .desc = "On/Off",
+ .wakeup = 1,
+ },
+ /* Two buttons detecting the lid state */
+ {
+ .type = EV_SW,
+ .code = 0,
+ .gpio = SPITZ_GPIO_SWA,
+ .desc = "Display Down",
+ },
+ {
+ .type = EV_SW,
+ .code = 1,
+ .gpio = SPITZ_GPIO_SWB,
+ .desc = "Lid Closed",
+ },
+};
+
+static struct gpio_keys_platform_data spitz_gpio_keys_platform_data = {
+ .buttons = spitz_gpio_keys,
+ .nbuttons = ARRAY_SIZE(spitz_gpio_keys),
+};
+
+static struct platform_device spitz_gpio_keys_device = {
+ .name = "gpio-keys",
+ .id = -1,
+ .dev = {
+ .platform_data = &spitz_gpio_keys_platform_data,
+ },
+};
+
+
/*
* Spitz LEDs
*/
static struct platform_device *devices[] __initdata = {
&spitzscoop_device,
&spitzkbd_device,
+ &spitz_gpio_keys_device,
&spitzled_device,
&sharpsl_nand_device,
&sharpsl_rom_device,
select CPU_TLB_V4WBI if MMU
help
The ARM920T is licensed to be produced by numerous vendors,
- and is used in the Maverick EP9312 and the Samsung S3C2410.
-
- More information on the Maverick EP9312 at
- <http://linuxdevices.com/products/PD2382866068.html>.
+ and is used in the Cirrus EP93xx and the Samsung S3C2410.
Say Y if you want support for the ARM920T processor.
Otherwise, say N.
#ifdef CONFIG_ARCH_OMAP2
3,
#endif
+#ifdef CONFIG_ARCH_BCMRING
+ IRQ_PMUIRQ, /* for BCMRING, ARM PMU interrupt is 43 */
+#endif
};
static void armv6_pmu_stop(void)
config USB_GADGET_PXA25X
boolean "PXA 25x or IXP 4xx"
depends on (ARCH_PXA && PXA25x) || ARCH_IXP4XX
+ select USB_OTG_UTILS
help
Intel's PXA 25x series XScale ARM-5TE processors include
an integrated full speed USB 1.1 device controller. The
projects / linux-2.6-block.git / commitdiff