ACPI: EC: use printk_ratelimit(), add some DEBUG mode messages
authorMárton Németh <nm127@freemail.hu>
Wed, 21 Nov 2007 00:23:26 +0000 (03:23 +0300)
committerLen Brown <len.brown@intel.com>
Wed, 21 Nov 2007 01:04:39 +0000 (20:04 -0500)
Sometimes it is usefull to see raw protocol dump.
Uncomment '#define DEBUG' at the beginning of file to make EC
really verbose.

Signed-off-by: Márton Németh <nm127@freemail.hu>
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
Signed-off-by: Len Brown <len.brown@intel.com>
drivers/acpi/ec.c

index 06b78e5e33a11b8a13a0b0874311f2bb7faf075a..d5a5958d4b201982300695ca0809ab1173836ab3 100644 (file)
@@ -47,6 +47,9 @@
 #undef PREFIX
 #define PREFIX                         "ACPI: EC: "
 
+/* Uncomment next line to get verbose print outs*/
+/* #define DEBUG */
+
 /* EC status register */
 #define ACPI_EC_FLAG_OBF       0x01    /* Output buffer full */
 #define ACPI_EC_FLAG_IBF       0x02    /* Input buffer full */
@@ -131,21 +134,27 @@ static struct acpi_ec {
 
 static inline u8 acpi_ec_read_status(struct acpi_ec *ec)
 {
-       return inb(ec->command_addr);
+       u8 x = inb(ec->command_addr);
+       pr_debug(PREFIX "---> status = 0x%2x\n", x);
+       return x;
 }
 
 static inline u8 acpi_ec_read_data(struct acpi_ec *ec)
 {
+       u8 x = inb(ec->data_addr);
+       pr_debug(PREFIX "---> data = 0x%2x\n", x);
        return inb(ec->data_addr);
 }
 
 static inline void acpi_ec_write_cmd(struct acpi_ec *ec, u8 command)
 {
+       pr_debug(PREFIX "<--- command = 0x%2x\n", command);
        outb(command, ec->command_addr);
 }
 
 static inline void acpi_ec_write_data(struct acpi_ec *ec, u8 data)
 {
+       pr_debug(PREFIX "<--- data = 0x%2x\n", data);
        outb(data, ec->data_addr);
 }
 
@@ -175,13 +184,14 @@ static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll)
                if (acpi_ec_check_status(ec, event)) {
                        if (event == ACPI_EC_EVENT_OBF_1) {
                                /* miss OBF = 1 GPE, don't expect it anymore */
-                               printk(KERN_INFO PREFIX "missing OBF_1 confirmation,"
+                               pr_info(PREFIX "missing OBF_1 confirmation,"
                                        "switching to degraded mode.\n");
                                set_bit(EC_FLAGS_ONLY_IBF_GPE, &ec->flags);
                        } else {
                                /* missing GPEs, switch back to poll mode */
-                               printk(KERN_INFO PREFIX "missing IBF_1 confirmations,"
-                                       "switch off interrupt mode.\n");
+                               if (printk_ratelimit())
+                                       pr_info(PREFIX "missing IBF_1 confirmations,"
+                                               "switch off interrupt mode.\n");
                                clear_bit(EC_FLAGS_GPE_MODE, &ec->flags);
                        }
                        return 0;
@@ -194,7 +204,7 @@ static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll)
                                return 0;
                }
        }
-       printk(KERN_ERR PREFIX "acpi_ec_wait timeout,"
+       pr_err(PREFIX "acpi_ec_wait timeout,"
                               " status = %d, expect_event = %d\n",
                               acpi_ec_read_status(ec), event);
        return -ETIME;
@@ -208,11 +218,11 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, u8 command,
        int result = 0;
        set_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
        acpi_ec_write_cmd(ec, command);
-
+       pr_debug(PREFIX "transaction start\n");
        for (; wdata_len > 0; --wdata_len) {
                result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, force_poll);
                if (result) {
-                       printk(KERN_ERR PREFIX
+                       pr_err(PREFIX
                               "write_cmd timeout, command = %d\n", command);
                        goto end;
                }
@@ -223,7 +233,7 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, u8 command,
        if (!rdata_len) {
                result = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, force_poll);
                if (result) {
-                       printk(KERN_ERR PREFIX
+                       pr_err(PREFIX
                               "finish-write timeout, command = %d\n", command);
                        goto end;
                }
@@ -235,8 +245,7 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, u8 command,
                        force_poll = 1;
                result = acpi_ec_wait(ec, ACPI_EC_EVENT_OBF_1, force_poll);
                if (result) {
-                       printk(KERN_ERR PREFIX "read timeout, command = %d\n",
-                              command);
+                       pr_err(PREFIX "read timeout, command = %d\n", command);
                        goto end;
                }
                /* Don't expect GPE after last read */
@@ -245,6 +254,7 @@ static int acpi_ec_transaction_unlocked(struct acpi_ec *ec, u8 command,
                *(rdata++) = acpi_ec_read_data(ec);
        }
       end:
+       pr_debug(PREFIX "transaction end\n");
        return result;
 }
 
@@ -273,8 +283,8 @@ static int acpi_ec_transaction(struct acpi_ec *ec, u8 command,
 
        status = acpi_ec_wait(ec, ACPI_EC_EVENT_IBF_0, 0);
        if (status) {
-               printk(KERN_ERR PREFIX
-                      "input buffer is not empty, aborting transaction\n");
+               pr_err(PREFIX "input buffer is not empty, "
+                               "aborting transaction\n");
                goto end;
        }
 
@@ -488,6 +498,7 @@ static u32 acpi_ec_gpe_handler(void *data)
        acpi_status status = AE_OK;
        struct acpi_ec *ec = data;
 
+       pr_debug(PREFIX "~~~> interrupt\n");
        clear_bit(EC_FLAGS_WAIT_GPE, &ec->flags);
        if (test_bit(EC_FLAGS_GPE_MODE, &ec->flags))
                wake_up(&ec->wait);
@@ -498,8 +509,9 @@ static u32 acpi_ec_gpe_handler(void *data)
                                acpi_ec_gpe_query, ec);
        } else if (unlikely(!test_bit(EC_FLAGS_GPE_MODE, &ec->flags))) {
                /* this is non-query, must be confirmation */
-               printk(KERN_INFO PREFIX "non-query interrupt received,"
-                       " switching to interrupt mode\n");
+               if (printk_ratelimit())
+                       pr_info(PREFIX "non-query interrupt received,"
+                               " switching to interrupt mode\n");
                set_bit(EC_FLAGS_GPE_MODE, &ec->flags);
        }
 
@@ -701,10 +713,10 @@ static void ec_remove_handlers(struct acpi_ec *ec)
 {
        if (ACPI_FAILURE(acpi_remove_address_space_handler(ec->handle,
                                ACPI_ADR_SPACE_EC, &acpi_ec_space_handler)))
-               printk(KERN_ERR PREFIX "failed to remove space handler\n");
+               pr_err(PREFIX "failed to remove space handler\n");
        if (ACPI_FAILURE(acpi_remove_gpe_handler(NULL, ec->gpe,
                                &acpi_ec_gpe_handler)))
-               printk(KERN_ERR PREFIX "failed to remove gpe handler\n");
+               pr_err(PREFIX "failed to remove gpe handler\n");
        ec->handlers_installed = 0;
 }
 
@@ -747,9 +759,9 @@ static int acpi_ec_add(struct acpi_device *device)
                first_ec = ec;
        acpi_driver_data(device) = ec;
        acpi_ec_add_fs(device);
-       printk(KERN_INFO PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n",
+       pr_info(PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n",
                          ec->gpe, ec->command_addr, ec->data_addr);
-       printk(KERN_INFO PREFIX "driver started in %s mode\n",
+       pr_info(PREFIX "driver started in %s mode\n",
                (test_bit(EC_FLAGS_GPE_MODE, &ec->flags))?"interrupt":"poll");
        return 0;
 }
@@ -875,7 +887,7 @@ int __init acpi_ec_ecdt_probe(void)
        status = acpi_get_table(ACPI_SIG_ECDT, 1,
                                (struct acpi_table_header **)&ecdt_ptr);
        if (ACPI_SUCCESS(status)) {
-               printk(KERN_INFO PREFIX "EC description table is found, configuring boot EC\n");
+               pr_info(PREFIX "EC description table is found, configuring boot EC\n");
                boot_ec->command_addr = ecdt_ptr->control.address;
                boot_ec->data_addr = ecdt_ptr->data.address;
                boot_ec->gpe = ecdt_ptr->gpe;