ath5k: rework beacon configuration
authorBob Copeland <me@bobcopeland.com>
Sat, 4 Jul 2009 16:59:52 +0000 (12:59 -0400)
committerJohn W. Linville <linville@tuxdriver.com>
Fri, 10 Jul 2009 19:02:29 +0000 (15:02 -0400)
Using the enable_beacon flag allows some simplifications and fixes
some corner cases in beacon handling.  This change adds a state
variable for beaconing in ath5k_beacon_config and handles both
enabling and disabling, thus eliminating the need for
ath5k_beacon_disable.  We also now configure the beacon when any
of the beacon parameters change, so ath5k_beacon_reconfig is no
longer needed (its mmiowb gets moved to ath5k_beacon_config).
Finally, by locking around the whole config function, we don't
need to worry about clearing the interrupt mask register before
installing the new mask.

The upshot is this correctly disables beaconing when the interfaces
are taken down, it fixes a potential restarting of beaconing
when ath5k_reset() is called, and ensures that updates to the
beacon interval take effect immediately.

Signed-off-by: Bob Copeland <me@bobcopeland.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
drivers/net/wireless/ath/ath5k/base.c
drivers/net/wireless/ath/ath5k/base.h

index 87ebc461d74a41c88fd976ddf8964ca01e81746c..482932979c9b4cacddc311c2788c6c73604e4e18 100644 (file)
@@ -2093,13 +2093,6 @@ err_unmap:
        return ret;
 }
 
-static void ath5k_beacon_disable(struct ath5k_softc *sc)
-{
-       sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA);
-       ath5k_hw_set_imr(sc->ah, sc->imask);
-       ath5k_hw_stop_tx_dma(sc->ah, sc->bhalq);
-}
-
 /*
  * Transmit a beacon frame at SWBA.  Dynamic updates to the
  * frame contents are done as needed and the slot time is
@@ -2293,13 +2286,11 @@ ath5k_beacon_config(struct ath5k_softc *sc)
        struct ath5k_hw *ah = sc->ah;
        unsigned long flags;
 
-       ath5k_hw_set_imr(ah, 0);
+       spin_lock_irqsave(&sc->block, flags);
        sc->bmisscount = 0;
        sc->imask &= ~(AR5K_INT_BMISS | AR5K_INT_SWBA);
 
-       if (sc->opmode == NL80211_IFTYPE_ADHOC ||
-                       sc->opmode == NL80211_IFTYPE_MESH_POINT ||
-                       sc->opmode == NL80211_IFTYPE_AP) {
+       if (sc->enable_beacon) {
                /*
                 * In IBSS mode we use a self-linked tx descriptor and let the
                 * hardware send the beacons automatically. We have to load it
@@ -2312,16 +2303,17 @@ ath5k_beacon_config(struct ath5k_softc *sc)
                sc->imask |= AR5K_INT_SWBA;
 
                if (sc->opmode == NL80211_IFTYPE_ADHOC) {
-                       if (ath5k_hw_hasveol(ah)) {
-                               spin_lock_irqsave(&sc->block, flags);
+                       if (ath5k_hw_hasveol(ah))
                                ath5k_beacon_send(sc);
-                               spin_unlock_irqrestore(&sc->block, flags);
-                       }
                } else
                        ath5k_beacon_update_timers(sc, -1);
+       } else {
+               ath5k_hw_stop_tx_dma(sc->ah, sc->bhalq);
        }
 
        ath5k_hw_set_imr(ah, sc->imask);
+       mmiowb();
+       spin_unlock_irqrestore(&sc->block, flags);
 }
 
 static void ath5k_tasklet_beacon(unsigned long data)
@@ -2806,7 +2798,6 @@ ath5k_remove_interface(struct ieee80211_hw *hw,
                goto end;
 
        ath5k_hw_set_lladdr(sc->ah, mac);
-       ath5k_beacon_disable(sc);
        sc->vif = NULL;
 end:
        mutex_unlock(&sc->lock);
@@ -3135,25 +3126,6 @@ out:
        return ret;
 }
 
-/*
- *  Update the beacon and reconfigure the beacon queues.
- */
-static void
-ath5k_beacon_reconfig(struct ieee80211_hw *hw, struct ieee80211_vif *vif)
-{
-       int ret;
-       unsigned long flags;
-       struct ath5k_softc *sc = hw->priv;
-
-       spin_lock_irqsave(&sc->block, flags);
-       ret = ath5k_beacon_update(hw, vif);
-       spin_unlock_irqrestore(&sc->block, flags);
-       if (ret == 0) {
-               ath5k_beacon_config(sc);
-               mmiowb();
-       }
-}
-
 static void
 set_beacon_filter(struct ieee80211_hw *hw, bool enable)
 {
@@ -3176,6 +3148,7 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
 {
        struct ath5k_softc *sc = hw->priv;
        struct ath5k_hw *ah = sc->ah;
+       unsigned long flags;
 
        mutex_lock(&sc->lock);
        if (WARN_ON(sc->vif != vif))
@@ -3201,13 +3174,19 @@ static void ath5k_bss_info_changed(struct ieee80211_hw *hw,
                        AR5K_LED_ASSOC : AR5K_LED_INIT);
        }
 
-       if (changes & BSS_CHANGED_BEACON &&
-           (vif->type == NL80211_IFTYPE_ADHOC ||
-            vif->type == NL80211_IFTYPE_MESH_POINT ||
-            vif->type == NL80211_IFTYPE_AP)) {
-               ath5k_beacon_reconfig(hw, vif);
+       if (changes & BSS_CHANGED_BEACON) {
+               spin_lock_irqsave(&sc->block, flags);
+               ath5k_beacon_update(hw, vif);
+               spin_unlock_irqrestore(&sc->block, flags);
        }
 
+       if (changes & BSS_CHANGED_BEACON_ENABLED)
+               sc->enable_beacon = bss_conf->enable_beacon;
+
+       if (changes & (BSS_CHANGED_BEACON | BSS_CHANGED_BEACON_ENABLED |
+                      BSS_CHANGED_BEACON_INT))
+               ath5k_beacon_config(sc);
+
  unlock:
        mutex_unlock(&sc->lock);
 }
index 65e75fb5448263e13c0c22e742bcd4540dc29ee5..778e422946abf174503de8b6c00047f05663bf27 100644 (file)
@@ -190,6 +190,7 @@ struct ath5k_softc {
        struct timer_list       calib_tim;      /* calibration timer */
        int                     power_level;    /* Requested tx power in dbm */
        bool                    assoc;          /* assocate state */
+       bool                    enable_beacon;  /* true if beacons are on */
 };
 
 #define ath5k_hw_hasbssidmask(_ah) \