regulator-always-on;
};
- /* FS USB Host PHY on port 1 for mdm6600 */
- fsusb1_phy: usb-phy@1 {
- compatible = "motorola,mapphone-mdm6600";
- pinctrl-0 = <&usb_mdm6600_pins>;
- pinctrl-1 = <&usb_mdm6600_sleep_pins>;
- pinctrl-names = "default", "sleep";
- enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; /* gpio_95 */
- power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54 */
- reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; /* gpio_49 */
- /* mode: gpio_148 gpio_149 */
- motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
- <&gpio5 21 GPIO_ACTIVE_HIGH>;
- /* cmd: gpio_103 gpio_104 gpio_142 */
- motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
- <&gpio4 8 GPIO_ACTIVE_HIGH>,
- <&gpio5 14 GPIO_ACTIVE_HIGH>;
- /* status: gpio_52 gpio_53 gpio_55 */
- motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
- <&gpio2 21 GPIO_ACTIVE_HIGH>,
- <&gpio2 23 GPIO_ACTIVE_HIGH>;
- #phy-cells = <0>;
- };
-
- /* HS USB host TLL nop-phy on port 2 for w3glte */
- hsusb2_phy: usb-phy@2 {
- compatible = "usb-nop-xceiv";
- #phy-cells = <0>;
- };
-
/* This is probably coming straight from the battery.. */
wl12xx_vmmc: regulator-wl12xx {
compatible = "regulator-fixed";
dais = <&mcbsp2_port>, <&mcbsp3_port>;
};
-
- pwm8: pwm-8 {
- pinctrl-names = "default";
- pinctrl-0 = <&vibrator_direction_pin>;
-
- compatible = "ti,omap-dmtimer-pwm";
- #pwm-cells = <3>;
- ti,timers = <&timer8>;
- ti,clock-source = <0x01>;
- };
-
- pwm9: pwm-9 {
- pinctrl-names = "default";
- pinctrl-0 = <&vibrator_enable_pin>;
-
- compatible = "ti,omap-dmtimer-pwm";
- #pwm-cells = <3>;
- ti,timers = <&timer9>;
- ti,clock-source = <0x01>;
- };
-
- vibrator {
- compatible = "pwm-vibrator";
- pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
- pwm-names = "enable", "direction";
- direction-duty-cycle-ns = <10000000>;
- };
};
&cpu_thermal {
};
};
-/* Battery NVRAM on 1-wire handled by w1_ds250x driver */
-&hdqw1w {
- pinctrl-0 = <&hdq_pins>;
- pinctrl-names = "default";
- ti,mode = "1w";
-};
-
&i2c1 {
tmp105@48 {
compatible = "ti,tmp105";
};
};
-&i2c2 {
- touchscreen@4a {
- compatible = "atmel,maxtouch";
- reg = <0x4a>;
- pinctrl-names = "default";
- pinctrl-0 = <&touchscreen_pins>;
-
- reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */
-
- /* gpio_183 with sys_nirq2 pad as wakeup */
- interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>,
- <&omap4_pmx_core 0x160>;
- interrupt-names = "irq", "wakeup";
- wakeup-source;
- };
-
- isl29030@44 {
- compatible = "isil,isl29030";
- reg = <0x44>;
-
- pinctrl-names = "default";
- pinctrl-0 = <&als_proximity_pins>;
-
- interrupt-parent = <&gpio6>;
- interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */
- };
-};
-
&omap4_pmx_core {
/* hdmi_hpd.gpio_63 */
>;
};
- hdq_pins: hdq-pins {
- pinctrl-single,pins = <
- /* 0x4a100120 hdq_sio.hdq_sio aa27 */
- OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0)
- >;
- };
-
/* hdmi_cec.hdmi_cec, hdmi_scl.hdmi_scl, hdmi_sda.hdmi_sda */
dss_hdmi_pins: dss-hdmi-pins {
pinctrl-single,pins = <
>;
};
- touchscreen_pins: touchscreen-pins {
- pinctrl-single,pins = <
- OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
- OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
- >;
- };
-
- als_proximity_pins: als-proximity-pins {
- pinctrl-single,pins = <
- OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
- >;
- };
-
- usb_mdm6600_pins: usb-mdm6600-pins {
- pinctrl-single,pins = <
- /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
- OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
-
- /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
- OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
-
- /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
- OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)
-
- /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
- OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
-
- /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
- OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
-
- /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
- OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
-
- /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
- OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
-
- /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
- OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
-
- /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
- OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
-
- /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
- OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
-
- /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
- OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
- >;
- };
-
- /* Modem sleep pins to keep gpio_49 high with internal pull */
- usb_mdm6600_sleep_pins: usb-mdm6600-sleep-pins {
- pinctrl-single,pins = <
- OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
- OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
- OMAP4_IOPAD(0x072, PIN_INPUT_PULLUP | MUX_MODE7) /* Keep gpio_49 reset high */
- OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
- OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
- OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
- OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
- OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
- OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
- OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
- OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
- >;
- };
-
usb_ulpi_pins: usb-ulpi-pins {
pinctrl-single,pins = <
OMAP4_IOPAD(0x196, MUX_MODE7)
OMAP4_IOPAD(0x10c, PIN_INPUT | MUX_MODE1) /* abe_mcbsp3_fsx */
>;
};
-
- vibrator_direction_pin: vibrator-direction-pins {
- pinctrl-single,pins = <
- OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */
- >;
- };
-
- vibrator_enable_pin: vibrator-enable-pins {
- pinctrl-single,pins = <
- OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */
- >;
- };
};
&omap4_pmx_wkup {
status = "disabled";
};
-/* Configure pwm clock source for timers 8 & 9 */
-&timer8 {
- assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
- assigned-clock-parents = <&sys_32k_ck>;
-};
-
-&timer9 {
- assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
- assigned-clock-parents = <&sys_32k_ck>;
-};
-
/*
* The uart1 port is wired to mdm6600 with rts and cts. The modem uses gpio_149
* for wake-up events for both the USB PHY and the UART. We can use gpio_149
};
};
-&usbhsohci {
- phys = <&fsusb1_phy>;
- phy-names = "usb";
-};
-
-&usbhsehci {
- phys = <&hsusb2_phy>;
-};
-
-&usbhshost {
- port1-mode = "ohci-phy-4pin-dpdm";
- port2-mode = "ehci-tll";
-};
-
/* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */
&usb_otg_hs {
interface-type = <1>;
power = <150>;
};
-&i2c4 {
- ak8975: magnetometer@c {
- compatible = "asahi-kasei,ak8975";
- reg = <0x0c>;
-
- vdd-supply = <&vhvio>;
-
- interrupt-parent = <&gpio6>;
- interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
-
- rotation-matrix = "-1", "0", "0",
- "0", "1", "0",
- "0", "0", "-1";
-
- };
-};
-
&mcbsp2 {
#sound-dai-cells = <0>;
pinctrl-names = "default";
--- /dev/null
+// SPDX-License-Identifier: GPL-2.0-only
+/dts-v1/;
+
+#include "motorola-mapphone-common.dtsi"
+
+/ {
+ /* FS USB Host PHY on port 1 for mdm6600 */
+ fsusb1_phy: usb-phy@1 {
+ compatible = "motorola,mapphone-mdm6600";
+ pinctrl-0 = <&usb_mdm6600_pins>;
+ pinctrl-1 = <&usb_mdm6600_sleep_pins>;
+ pinctrl-names = "default", "sleep";
+ enable-gpios = <&gpio3 31 GPIO_ACTIVE_LOW>; /* gpio_95 */
+ power-gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>; /* gpio_54 */
+ reset-gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>; /* gpio_49 */
+ /* mode: gpio_148 gpio_149 */
+ motorola,mode-gpios = <&gpio5 20 GPIO_ACTIVE_HIGH>,
+ <&gpio5 21 GPIO_ACTIVE_HIGH>;
+ /* cmd: gpio_103 gpio_104 gpio_142 */
+ motorola,cmd-gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>,
+ <&gpio4 8 GPIO_ACTIVE_HIGH>,
+ <&gpio5 14 GPIO_ACTIVE_HIGH>;
+ /* status: gpio_52 gpio_53 gpio_55 */
+ motorola,status-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>,
+ <&gpio2 21 GPIO_ACTIVE_HIGH>,
+ <&gpio2 23 GPIO_ACTIVE_HIGH>;
+ #phy-cells = <0>;
+ };
+
+ /* HS USB host TLL nop-phy on port 2 for w3glte */
+ hsusb2_phy: usb-phy@2 {
+ compatible = "usb-nop-xceiv";
+ #phy-cells = <0>;
+ };
+
+ pwm8: pwm-8 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vibrator_direction_pin>;
+
+ compatible = "ti,omap-dmtimer-pwm";
+ #pwm-cells = <3>;
+ ti,timers = <&timer8>;
+ ti,clock-source = <0x01>;
+ };
+
+ pwm9: pwm-9 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&vibrator_enable_pin>;
+
+ compatible = "ti,omap-dmtimer-pwm";
+ #pwm-cells = <3>;
+ ti,timers = <&timer9>;
+ ti,clock-source = <0x01>;
+ };
+
+ vibrator {
+ compatible = "pwm-vibrator";
+ pwms = <&pwm9 0 10000000 0>, <&pwm8 0 10000000 0>;
+ pwm-names = "enable", "direction";
+ direction-duty-cycle-ns = <10000000>;
+ };
+};
+
+/* Battery NVRAM on 1-wire handled by w1_ds250x driver */
+&hdqw1w {
+ pinctrl-0 = <&hdq_pins>;
+ pinctrl-names = "default";
+ ti,mode = "1w";
+};
+
+&i2c2 {
+ touchscreen@4a {
+ compatible = "atmel,maxtouch";
+ reg = <0x4a>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&touchscreen_pins>;
+
+ reset-gpios = <&gpio6 13 GPIO_ACTIVE_LOW>; /* gpio173 */
+
+ /* gpio_183 with sys_nirq2 pad as wakeup */
+ interrupts-extended = <&gpio6 23 IRQ_TYPE_LEVEL_LOW>,
+ <&omap4_pmx_core 0x160>;
+ interrupt-names = "irq", "wakeup";
+ wakeup-source;
+ };
+
+ isl29030@44 {
+ compatible = "isil,isl29030";
+ reg = <0x44>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&als_proximity_pins>;
+
+ interrupt-parent = <&gpio6>;
+ interrupts = <17 IRQ_TYPE_LEVEL_LOW>; /* gpio177 */
+ };
+};
+
+&omap4_pmx_core {
+ hdq_pins: hdq-pins {
+ pinctrl-single,pins = <
+ /* 0x4a100120 hdq_sio.hdq_sio aa27 */
+ OMAP4_IOPAD(0x120, PIN_INPUT | MUX_MODE0)
+ >;
+ };
+
+ /* kpd_row0.gpio_178 */
+ tmp105_irq: tmp105-irq-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x18e, PIN_INPUT_PULLUP | MUX_MODE3)
+ >;
+ };
+
+ touchscreen_pins: touchscreen-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x180, PIN_OUTPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x1a0, PIN_INPUT_PULLUP | MUX_MODE3)
+ >;
+ };
+
+ usb_mdm6600_pins: usb-mdm6600-pins {
+ pinctrl-single,pins = <
+ /* enable 0x4a1000d8 usbb1_ulpitll_dat7.gpio_95 ag16 */
+ OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
+
+ /* power 0x4a10007c gpmc_nwp.gpio_54 c25 */
+ OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
+
+ /* reset 0x4a100072 gpmc_a25.gpio_49 d20 */
+ OMAP4_IOPAD(0x072, PIN_OUTPUT | MUX_MODE3)
+
+ /* mode0/bpwake 0x4a10014e sdmmc5_dat1.gpio_148 af4 */
+ OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
+
+ /* mode1/apwake 0x4a100150 sdmmc5_dat2.gpio_149 ag3 */
+ OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
+
+ /* status0 0x4a10007e gpmc_clk.gpio_55 b22 */
+ OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
+
+ /* status1 0x4a10007a gpmc_ncs3.gpio_53 c22 */
+ OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
+
+ /* status2 0x4a100078 gpmc_ncs2.gpio_52 d21 */
+ OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
+
+ /* cmd0 0x4a100094 gpmc_ncs6.gpio_103 c24 */
+ OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
+
+ /* cmd1 0x4a100096 gpmc_ncs7.gpio_104 d24 */
+ OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
+
+ /* cmd2 0x4a100142 uart3_rts_sd.gpio_142 f28 */
+ OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
+ >;
+ };
+
+ /* Modem sleep pins to keep gpio_49 high with internal pull */
+ usb_mdm6600_sleep_pins: usb-mdm6600-sleep-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x0d8, PIN_INPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x07c, PIN_OUTPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x072, PIN_INPUT_PULLUP | MUX_MODE7) /* Keep gpio_49 reset high */
+ OMAP4_IOPAD(0x14e, PIN_OUTPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x150, PIN_OFF_OUTPUT_LOW | PIN_INPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x07e, PIN_INPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x07a, PIN_INPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x078, PIN_INPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x094, PIN_OUTPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x096, PIN_OUTPUT | MUX_MODE3)
+ OMAP4_IOPAD(0x142, PIN_OUTPUT | MUX_MODE3)
+ >;
+ };
+
+ als_proximity_pins: als-proximity-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x18c, PIN_INPUT_PULLUP | MUX_MODE3)
+ >;
+ };
+
+ vibrator_direction_pin: vibrator-direction-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */
+ >;
+ };
+
+ vibrator_enable_pin: vibrator-enable-pins {
+ pinctrl-single,pins = <
+ OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */
+ >;
+ };
+};
+
+/* Configure pwm clock source for timers 8 & 9 */
+&timer8 {
+ assigned-clocks = <&abe_clkctrl OMAP4_TIMER8_CLKCTRL 24>;
+ assigned-clock-parents = <&sys_32k_ck>;
+};
+
+&timer9 {
+ assigned-clocks = <&l4_per_clkctrl OMAP4_TIMER9_CLKCTRL 24>;
+ assigned-clock-parents = <&sys_32k_ck>;
+};
+
+&usbhsohci {
+ phys = <&fsusb1_phy>;
+ phy-names = "usb";
+};
+
+&usbhsehci {
+ phys = <&hsusb2_phy>;
+};
+
+&usbhshost {
+ port1-mode = "ohci-phy-4pin-dpdm";
+ port2-mode = "ehci-tll";
+};
+
+&i2c4 {
+ ak8975: magnetometer@c {
+ compatible = "asahi-kasei,ak8975";
+ reg = <0x0c>;
+
+ vdd-supply = <&vhvio>;
+
+ interrupt-parent = <&gpio6>;
+ interrupts = <15 IRQ_TYPE_EDGE_RISING>; /* gpio175 */
+
+ rotation-matrix = "-1", "0", "0",
+ "0", "1", "0",
+ "0", "0", "-1";
+
+ };
+};
projects / linux-block.git / commitdiff