powerpc/therm_adt746x: Record pwm invert bit at module load time]
authorDarrick J. Wong <djwong@us.ibm.com>
Thu, 3 Dec 2009 16:19:59 +0000 (16:19 +0000)
committerBenjamin Herrenschmidt <benh@kernel.crashing.org>
Wed, 9 Dec 2009 06:09:31 +0000 (17:09 +1100)
In commit 0512a9a8e277a9de2820211eef964473b714ae65, we unilaterally zero the
"pwm invert" bit in the fan behavior configuration register.  On my PowerBook
G4, this results in the fans going to full speed at low temperature and
shutting off at high temperature because the pwm invert bit is supposed to be
set.

Therefore, record the pwm invert bit at driver load time, and write the bit
into the fan behavior control register.  This restores correct behavior on my
PBG4 and should work around the bit being set to the wrong value after
suspend/resume (which is what the original patch was trying to fix).  It also
fixes a minor omission where the pwm invert bit correction is NOT performed
when switching into automatic mode.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
CC: <stable@kernel.org>
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
drivers/macintosh/therm_adt746x.c

index 95b676a19be72c791235a5d3c9594a0911f1fa22..5ff47ba7f2d052e639f733c6f8cddea3e18b9175 100644 (file)
@@ -79,6 +79,7 @@ struct thermostat {
        u8                      limits[3];
        int                     last_speed[2];
        int                     last_var[2];
+       int                     pwm_inv[2];
 };
 
 static enum {ADT7460, ADT7467} therm_type;
@@ -229,19 +230,23 @@ static void write_fan_speed(struct thermostat *th, int speed, int fan)
        
        if (speed >= 0) {
                manual = read_reg(th, MANUAL_MODE[fan]);
+               manual &= ~INVERT_MASK;
                write_reg(th, MANUAL_MODE[fan],
-                       (manual|MANUAL_MASK) & (~INVERT_MASK));
+                       manual | MANUAL_MASK | th->pwm_inv[fan]);
                write_reg(th, FAN_SPD_SET[fan], speed);
        } else {
                /* back to automatic */
                if(therm_type == ADT7460) {
                        manual = read_reg(th,
                                MANUAL_MODE[fan]) & (~MANUAL_MASK);
-
+                       manual &= ~INVERT_MASK;
+                       manual |= th->pwm_inv[fan];
                        write_reg(th,
                                MANUAL_MODE[fan], manual|REM_CONTROL[fan]);
                } else {
                        manual = read_reg(th, MANUAL_MODE[fan]);
+                       manual &= ~INVERT_MASK;
+                       manual |= th->pwm_inv[fan];
                        write_reg(th, MANUAL_MODE[fan], manual&(~AUTO_MASK));
                }
        }
@@ -418,6 +423,10 @@ static int probe_thermostat(struct i2c_client *client,
 
        thermostat = th;
 
+       /* record invert bit status because fw can corrupt it after suspend */
+       th->pwm_inv[0] = read_reg(th, MANUAL_MODE[0]) & INVERT_MASK;
+       th->pwm_inv[1] = read_reg(th, MANUAL_MODE[1]) & INVERT_MASK;
+
        /* be sure to really write fan speed the first time */
        th->last_speed[0] = -2;
        th->last_speed[1] = -2;