hrfid; \
b hrfi_flush_fallback
-/*
- * We're short on space and time in the exception prolog, so we can't
- * use the normal LOAD_REG_IMMEDIATE macro to load the address of label.
- * Instead we get the base of the kernel from paca->kernelbase and or in the low
- * part of label. This requires that the label be within 64KB of kernelbase, and
- * that kernelbase be 64K aligned.
- */
-#define LOAD_HANDLER(reg, label) \
- ld reg,PACAKBASE(r13); /* get high part of &label */ \
- ori reg,reg,FIXED_SYMBOL_ABS_ADDR(label)
-
-#define __LOAD_HANDLER(reg, label) \
- ld reg,PACAKBASE(r13); \
- ori reg,reg,(ABS_ADDR(label))@l
-
-/*
- * Branches from unrelocated code (e.g., interrupts) to labels outside
- * head-y require >64K offsets.
- */
-#define __LOAD_FAR_HANDLER(reg, label) \
- ld reg,PACAKBASE(r13); \
- ori reg,reg,(ABS_ADDR(label))@l; \
- addis reg,reg,(ABS_ADDR(label))@h
-
-/* Exception register prefixes */
-#define EXC_HV 1
-#define EXC_STD 0
-
-#if defined(CONFIG_RELOCATABLE)
-/*
- * If we support interrupts with relocation on AND we're a relocatable kernel,
- * we need to use CTR to get to the 2nd level handler. So, save/restore it
- * when required.
- */
-#define SAVE_CTR(reg, area) mfctr reg ; std reg,area+EX_CTR(r13)
-#define GET_CTR(reg, area) ld reg,area+EX_CTR(r13)
-#define RESTORE_CTR(reg, area) ld reg,area+EX_CTR(r13) ; mtctr reg
-#else
-/* ...else CTR is unused and in register. */
-#define SAVE_CTR(reg, area)
-#define GET_CTR(reg, area) mfctr reg
-#define RESTORE_CTR(reg, area)
-#endif
-
-/*
- * PPR save/restore macros used in exceptions_64s.S
- * Used for P7 or later processors
- */
-#define SAVE_PPR(area, ra) \
-BEGIN_FTR_SECTION_NESTED(940) \
- ld ra,area+EX_PPR(r13); /* Read PPR from paca */ \
- std ra,_PPR(r1); \
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,940)
-
-#define RESTORE_PPR_PACA(area, ra) \
-BEGIN_FTR_SECTION_NESTED(941) \
- ld ra,area+EX_PPR(r13); \
- mtspr SPRN_PPR,ra; \
-END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,941)
-
-/*
- * Get an SPR into a register if the CPU has the given feature
- */
-#define OPT_GET_SPR(ra, spr, ftr) \
-BEGIN_FTR_SECTION_NESTED(943) \
- mfspr ra,spr; \
-END_FTR_SECTION_NESTED(ftr,ftr,943)
-
-/*
- * Set an SPR from a register if the CPU has the given feature
- */
-#define OPT_SET_SPR(ra, spr, ftr) \
-BEGIN_FTR_SECTION_NESTED(943) \
- mtspr spr,ra; \
-END_FTR_SECTION_NESTED(ftr,ftr,943)
-
-/*
- * Save a register to the PACA if the CPU has the given feature
- */
-#define OPT_SAVE_REG_TO_PACA(offset, ra, ftr) \
-BEGIN_FTR_SECTION_NESTED(943) \
- std ra,offset(r13); \
-END_FTR_SECTION_NESTED(ftr,ftr,943)
-
-.macro EXCEPTION_PROLOG_0 area
- GET_PACA(r13)
- std r9,\area\()+EX_R9(r13) /* save r9 */
- OPT_GET_SPR(r9, SPRN_PPR, CPU_FTR_HAS_PPR)
- HMT_MEDIUM
- std r10,\area\()+EX_R10(r13) /* save r10 - r12 */
- OPT_GET_SPR(r10, SPRN_CFAR, CPU_FTR_CFAR)
-.endm
-
-.macro EXCEPTION_PROLOG_1 hsrr, area, kvm, vec, bitmask
- OPT_SAVE_REG_TO_PACA(\area\()+EX_PPR, r9, CPU_FTR_HAS_PPR)
- OPT_SAVE_REG_TO_PACA(\area\()+EX_CFAR, r10, CPU_FTR_CFAR)
- INTERRUPT_TO_KERNEL
- SAVE_CTR(r10, \area\())
- mfcr r9
- .if \kvm
- KVMTEST \hsrr \vec
- .endif
-
- .if \bitmask
- lbz r10,PACAIRQSOFTMASK(r13)
- andi. r10,r10,\bitmask
- /* Associate vector numbers with bits in paca->irq_happened */
- .if \vec == 0x500 || \vec == 0xea0
- li r10,PACA_IRQ_EE
- .elseif \vec == 0x900
- li r10,PACA_IRQ_DEC
- .elseif \vec == 0xa00 || \vec == 0xe80
- li r10,PACA_IRQ_DBELL
- .elseif \vec == 0xe60
- li r10,PACA_IRQ_HMI
- .elseif \vec == 0xf00
- li r10,PACA_IRQ_PMI
- .else
- .abort "Bad maskable vector"
- .endif
-
- .if \hsrr
- bne masked_Hinterrupt
- .else
- bne masked_interrupt
- .endif
- .endif
-
- std r11,\area\()+EX_R11(r13)
- std r12,\area\()+EX_R12(r13)
- GET_SCRATCH0(r10)
- std r10,\area\()+EX_R13(r13)
-.endm
-
-.macro EXCEPTION_PROLOG_2_REAL label, hsrr, set_ri
- ld r10,PACAKMSR(r13) /* get MSR value for kernel */
- .if ! \set_ri
- xori r10,r10,MSR_RI /* Clear MSR_RI */
- .endif
- .if \hsrr
- mfspr r11,SPRN_HSRR0 /* save HSRR0 */
- .else
- mfspr r11,SPRN_SRR0 /* save SRR0 */
- .endif
- LOAD_HANDLER(r12, \label\())
- .if \hsrr
- mtspr SPRN_HSRR0,r12
- mfspr r12,SPRN_HSRR1 /* and HSRR1 */
- mtspr SPRN_HSRR1,r10
- HRFI_TO_KERNEL
- .else
- mtspr SPRN_SRR0,r12
- mfspr r12,SPRN_SRR1 /* and SRR1 */
- mtspr SPRN_SRR1,r10
- RFI_TO_KERNEL
- .endif
- b . /* prevent speculative execution */
-.endm
-
-.macro EXCEPTION_PROLOG_2_VIRT label, hsrr
-#ifdef CONFIG_RELOCATABLE
- .if \hsrr
- mfspr r11,SPRN_HSRR0 /* save HSRR0 */
- .else
- mfspr r11,SPRN_SRR0 /* save SRR0 */
- .endif
- LOAD_HANDLER(r12, \label\())
- mtctr r12
- .if \hsrr
- mfspr r12,SPRN_HSRR1 /* and HSRR1 */
- .else
- mfspr r12,SPRN_SRR1 /* and HSRR1 */
- .endif
- li r10,MSR_RI
- mtmsrd r10,1 /* Set RI (EE=0) */
- bctr
-#else
- .if \hsrr
- mfspr r11,SPRN_HSRR0 /* save HSRR0 */
- mfspr r12,SPRN_HSRR1 /* and HSRR1 */
- .else
- mfspr r11,SPRN_SRR0 /* save SRR0 */
- mfspr r12,SPRN_SRR1 /* and SRR1 */
- .endif
- li r10,MSR_RI
- mtmsrd r10,1 /* Set RI (EE=0) */
- b \label
-#endif
-.endm
-
-/*
- * Branch to label using its 0xC000 address. This results in instruction
- * address suitable for MSR[IR]=0 or 1, which allows relocation to be turned
- * on using mtmsr rather than rfid.
- *
- * This could set the 0xc bits for !RELOCATABLE as an immediate, rather than
- * load KBASE for a slight optimisation.
- */
-#define BRANCH_TO_C000(reg, label) \
- __LOAD_HANDLER(reg, label); \
- mtctr reg; \
- bctr
-
-#ifdef CONFIG_RELOCATABLE
-#define BRANCH_TO_COMMON(reg, label) \
- __LOAD_HANDLER(reg, label); \
- mtctr reg; \
- bctr
-
-#define BRANCH_LINK_TO_FAR(label) \
- __LOAD_FAR_HANDLER(r12, label); \
- mtctr r12; \
- bctrl
-
-#else
-#define BRANCH_TO_COMMON(reg, label) \
- b label
-
-#define BRANCH_LINK_TO_FAR(label) \
- bl label
-#endif
-
-#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
-
-#ifdef CONFIG_RELOCATABLE
-/*
- * KVM requires __LOAD_FAR_HANDLER.
- *
- * __BRANCH_TO_KVM_EXIT branches are also a special case because they
- * explicitly use r9 then reload it from PACA before branching. Hence
- * the double-underscore.
- */
-#define __BRANCH_TO_KVM_EXIT(area, label) \
- mfctr r9; \
- std r9,HSTATE_SCRATCH1(r13); \
- __LOAD_FAR_HANDLER(r9, label); \
- mtctr r9; \
- ld r9,area+EX_R9(r13); \
- bctr
-
-#else
-#define __BRANCH_TO_KVM_EXIT(area, label) \
- ld r9,area+EX_R9(r13); \
- b label
-#endif
-
-#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
-/*
- * If hv is possible, interrupts come into to the hv version
- * of the kvmppc_interrupt code, which then jumps to the PR handler,
- * kvmppc_interrupt_pr, if the guest is a PR guest.
- */
-#define kvmppc_interrupt kvmppc_interrupt_hv
-#else
-#define kvmppc_interrupt kvmppc_interrupt_pr
-#endif
-
-.macro KVMTEST hsrr, n
- lbz r10,HSTATE_IN_GUEST(r13)
- cmpwi r10,0
- .if \hsrr
- bne do_kvm_H\n
- .else
- bne do_kvm_\n
- .endif
-.endm
-
-.macro KVM_HANDLER area, hsrr, n, skip
- .if \skip
- cmpwi r10,KVM_GUEST_MODE_SKIP
- beq 89f
- .else
- BEGIN_FTR_SECTION_NESTED(947)
- ld r10,\area+EX_CFAR(r13)
- std r10,HSTATE_CFAR(r13)
- END_FTR_SECTION_NESTED(CPU_FTR_CFAR,CPU_FTR_CFAR,947)
- .endif
-
- BEGIN_FTR_SECTION_NESTED(948)
- ld r10,\area+EX_PPR(r13)
- std r10,HSTATE_PPR(r13)
- END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
- ld r10,\area+EX_R10(r13)
- std r12,HSTATE_SCRATCH0(r13)
- sldi r12,r9,32
- /* HSRR variants have the 0x2 bit added to their trap number */
- .if \hsrr
- ori r12,r12,(\n + 0x2)
- .else
- ori r12,r12,(\n)
- .endif
- /* This reloads r9 before branching to kvmppc_interrupt */
- __BRANCH_TO_KVM_EXIT(\area, kvmppc_interrupt)
-
- .if \skip
-89: mtocrf 0x80,r9
- ld r9,\area+EX_R9(r13)
- ld r10,\area+EX_R10(r13)
- .if \hsrr
- b kvmppc_skip_Hinterrupt
- .else
- b kvmppc_skip_interrupt
- .endif
- .endif
-.endm
-
-#else
-.macro KVMTEST hsrr, n
-.endm
-.macro KVM_HANDLER area, hsrr, n, skip
-.endm
-#endif
-
-#define EXCEPTION_PROLOG_COMMON_1() \
- std r9,_CCR(r1); /* save CR in stackframe */ \
- std r11,_NIP(r1); /* save SRR0 in stackframe */ \
- std r12,_MSR(r1); /* save SRR1 in stackframe */ \
- std r10,0(r1); /* make stack chain pointer */ \
- std r0,GPR0(r1); /* save r0 in stackframe */ \
- std r10,GPR1(r1); /* save r1 in stackframe */ \
-
-
-/*
- * The common exception prolog is used for all except a few exceptions
- * such as a segment miss on a kernel address. We have to be prepared
- * to take another exception from the point where we first touch the
- * kernel stack onwards.
- *
- * On entry r13 points to the paca, r9-r13 are saved in the paca,
- * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and
- * SRR1, and relocation is on.
- */
-#define EXCEPTION_PROLOG_COMMON(n, area) \
- andi. r10,r12,MSR_PR; /* See if coming from user */ \
- mr r10,r1; /* Save r1 */ \
- subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ \
- beq- 1f; \
- ld r1,PACAKSAVE(r13); /* kernel stack to use */ \
-1: cmpdi cr1,r1,-INT_FRAME_SIZE; /* check if r1 is in userspace */ \
- blt+ cr1,3f; /* abort if it is */ \
- li r1,(n); /* will be reloaded later */ \
- sth r1,PACA_TRAP_SAVE(r13); \
- std r3,area+EX_R3(r13); \
- addi r3,r13,area; /* r3 -> where regs are saved*/ \
- RESTORE_CTR(r1, area); \
- b bad_stack; \
-3: EXCEPTION_PROLOG_COMMON_1(); \
- kuap_save_amr_and_lock r9, r10, cr1, cr0; \
- beq 4f; /* if from kernel mode */ \
- ACCOUNT_CPU_USER_ENTRY(r13, r9, r10); \
- SAVE_PPR(area, r9); \
-4: EXCEPTION_PROLOG_COMMON_2(area) \
- EXCEPTION_PROLOG_COMMON_3(n) \
- ACCOUNT_STOLEN_TIME
-
-/* Save original regs values from save area to stack frame. */
-#define EXCEPTION_PROLOG_COMMON_2(area) \
- ld r9,area+EX_R9(r13); /* move r9, r10 to stackframe */ \
- ld r10,area+EX_R10(r13); \
- std r9,GPR9(r1); \
- std r10,GPR10(r1); \
- ld r9,area+EX_R11(r13); /* move r11 - r13 to stackframe */ \
- ld r10,area+EX_R12(r13); \
- ld r11,area+EX_R13(r13); \
- std r9,GPR11(r1); \
- std r10,GPR12(r1); \
- std r11,GPR13(r1); \
- BEGIN_FTR_SECTION_NESTED(66); \
- ld r10,area+EX_CFAR(r13); \
- std r10,ORIG_GPR3(r1); \
- END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66); \
- GET_CTR(r10, area); \
- std r10,_CTR(r1);
-
-#define EXCEPTION_PROLOG_COMMON_3(n) \
- std r2,GPR2(r1); /* save r2 in stackframe */ \
- SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \
- SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \
- mflr r9; /* Get LR, later save to stack */ \
- ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \
- std r9,_LINK(r1); \
- lbz r10,PACAIRQSOFTMASK(r13); \
- mfspr r11,SPRN_XER; /* save XER in stackframe */ \
- std r10,SOFTE(r1); \
- std r11,_XER(r1); \
- li r9,(n)+1; \
- std r9,_TRAP(r1); /* set trap number */ \
- li r10,0; \
- ld r11,exception_marker@toc(r2); \
- std r10,RESULT(r1); /* clear regs->result */ \
- std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */
-
-#define RUNLATCH_ON \
-BEGIN_FTR_SECTION \
- ld r3, PACA_THREAD_INFO(r13); \
- ld r4,TI_LOCAL_FLAGS(r3); \
- andi. r0,r4,_TLF_RUNLATCH; \
- beql ppc64_runlatch_on_trampoline; \
-END_FTR_SECTION_IFSET(CPU_FTR_CTRL)
-
-#define EXCEPTION_COMMON(area, trap) \
- EXCEPTION_PROLOG_COMMON(trap, area); \
-
-/*
- * Exception where stack is already set in r1, r1 is saved in r10
- */
-#define EXCEPTION_COMMON_STACK(area, trap) \
- EXCEPTION_PROLOG_COMMON_1(); \
- kuap_save_amr_and_lock r9, r10, cr1; \
- EXCEPTION_PROLOG_COMMON_2(area); \
- EXCEPTION_PROLOG_COMMON_3(trap)
-
-/*
- * When the idle code in power4_idle puts the CPU into NAP mode,
- * it has to do so in a loop, and relies on the external interrupt
- * and decrementer interrupt entry code to get it out of the loop.
- * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags
- * to signal that it is in the loop and needs help to get out.
- */
-#ifdef CONFIG_PPC_970_NAP
-#define FINISH_NAP \
-BEGIN_FTR_SECTION \
- ld r11, PACA_THREAD_INFO(r13); \
- ld r9,TI_LOCAL_FLAGS(r11); \
- andi. r10,r9,_TLF_NAPPING; \
- bnel power4_fixup_nap; \
-END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
-#else
-#define FINISH_NAP
-#endif
-
#endif /* __ASSEMBLY__ */
#endif /* _ASM_POWERPC_EXCEPTION_H */
#include <asm/feature-fixups.h>
#include <asm/kup.h>
+/*
+ * We're short on space and time in the exception prolog, so we can't
+ * use the normal LOAD_REG_IMMEDIATE macro to load the address of label.
+ * Instead we get the base of the kernel from paca->kernelbase and or in the low
+ * part of label. This requires that the label be within 64KB of kernelbase, and
+ * that kernelbase be 64K aligned.
+ */
+#define LOAD_HANDLER(reg, label) \
+ ld reg,PACAKBASE(r13); /* get high part of &label */ \
+ ori reg,reg,FIXED_SYMBOL_ABS_ADDR(label)
+
+#define __LOAD_HANDLER(reg, label) \
+ ld reg,PACAKBASE(r13); \
+ ori reg,reg,(ABS_ADDR(label))@l
+
+/*
+ * Branches from unrelocated code (e.g., interrupts) to labels outside
+ * head-y require >64K offsets.
+ */
+#define __LOAD_FAR_HANDLER(reg, label) \
+ ld reg,PACAKBASE(r13); \
+ ori reg,reg,(ABS_ADDR(label))@l; \
+ addis reg,reg,(ABS_ADDR(label))@h
+
+/* Exception register prefixes */
+#define EXC_HV 1
+#define EXC_STD 0
+
+#if defined(CONFIG_RELOCATABLE)
+/*
+ * If we support interrupts with relocation on AND we're a relocatable kernel,
+ * we need to use CTR to get to the 2nd level handler. So, save/restore it
+ * when required.
+ */
+#define SAVE_CTR(reg, area) mfctr reg ; std reg,area+EX_CTR(r13)
+#define GET_CTR(reg, area) ld reg,area+EX_CTR(r13)
+#define RESTORE_CTR(reg, area) ld reg,area+EX_CTR(r13) ; mtctr reg
+#else
+/* ...else CTR is unused and in register. */
+#define SAVE_CTR(reg, area)
+#define GET_CTR(reg, area) mfctr reg
+#define RESTORE_CTR(reg, area)
+#endif
+
+/*
+ * PPR save/restore macros used in exceptions-64s.S
+ * Used for P7 or later processors
+ */
+#define SAVE_PPR(area, ra) \
+BEGIN_FTR_SECTION_NESTED(940) \
+ ld ra,area+EX_PPR(r13); /* Read PPR from paca */ \
+ std ra,_PPR(r1); \
+END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,940)
+
+#define RESTORE_PPR_PACA(area, ra) \
+BEGIN_FTR_SECTION_NESTED(941) \
+ ld ra,area+EX_PPR(r13); \
+ mtspr SPRN_PPR,ra; \
+END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,941)
+
+/*
+ * Get an SPR into a register if the CPU has the given feature
+ */
+#define OPT_GET_SPR(ra, spr, ftr) \
+BEGIN_FTR_SECTION_NESTED(943) \
+ mfspr ra,spr; \
+END_FTR_SECTION_NESTED(ftr,ftr,943)
+
+/*
+ * Set an SPR from a register if the CPU has the given feature
+ */
+#define OPT_SET_SPR(ra, spr, ftr) \
+BEGIN_FTR_SECTION_NESTED(943) \
+ mtspr spr,ra; \
+END_FTR_SECTION_NESTED(ftr,ftr,943)
+
+/*
+ * Save a register to the PACA if the CPU has the given feature
+ */
+#define OPT_SAVE_REG_TO_PACA(offset, ra, ftr) \
+BEGIN_FTR_SECTION_NESTED(943) \
+ std ra,offset(r13); \
+END_FTR_SECTION_NESTED(ftr,ftr,943)
+
+.macro EXCEPTION_PROLOG_0 area
+ GET_PACA(r13)
+ std r9,\area\()+EX_R9(r13) /* save r9 */
+ OPT_GET_SPR(r9, SPRN_PPR, CPU_FTR_HAS_PPR)
+ HMT_MEDIUM
+ std r10,\area\()+EX_R10(r13) /* save r10 - r12 */
+ OPT_GET_SPR(r10, SPRN_CFAR, CPU_FTR_CFAR)
+.endm
+
+.macro EXCEPTION_PROLOG_1 hsrr, area, kvm, vec, bitmask
+ OPT_SAVE_REG_TO_PACA(\area\()+EX_PPR, r9, CPU_FTR_HAS_PPR)
+ OPT_SAVE_REG_TO_PACA(\area\()+EX_CFAR, r10, CPU_FTR_CFAR)
+ INTERRUPT_TO_KERNEL
+ SAVE_CTR(r10, \area\())
+ mfcr r9
+ .if \kvm
+ KVMTEST \hsrr \vec
+ .endif
+ .if \bitmask
+ lbz r10,PACAIRQSOFTMASK(r13)
+ andi. r10,r10,\bitmask
+ /* Associate vector numbers with bits in paca->irq_happened */
+ .if \vec == 0x500 || \vec == 0xea0
+ li r10,PACA_IRQ_EE
+ .elseif \vec == 0x900
+ li r10,PACA_IRQ_DEC
+ .elseif \vec == 0xa00 || \vec == 0xe80
+ li r10,PACA_IRQ_DBELL
+ .elseif \vec == 0xe60
+ li r10,PACA_IRQ_HMI
+ .elseif \vec == 0xf00
+ li r10,PACA_IRQ_PMI
+ .else
+ .abort "Bad maskable vector"
+ .endif
+
+ .if \hsrr
+ bne masked_Hinterrupt
+ .else
+ bne masked_interrupt
+ .endif
+ .endif
+
+ std r11,\area\()+EX_R11(r13)
+ std r12,\area\()+EX_R12(r13)
+ GET_SCRATCH0(r10)
+ std r10,\area\()+EX_R13(r13)
+.endm
+
+.macro EXCEPTION_PROLOG_2_REAL label, hsrr, set_ri
+ ld r10,PACAKMSR(r13) /* get MSR value for kernel */
+ .if ! \set_ri
+ xori r10,r10,MSR_RI /* Clear MSR_RI */
+ .endif
+ .if \hsrr
+ mfspr r11,SPRN_HSRR0 /* save HSRR0 */
+ .else
+ mfspr r11,SPRN_SRR0 /* save SRR0 */
+ .endif
+ LOAD_HANDLER(r12, \label\())
+ .if \hsrr
+ mtspr SPRN_HSRR0,r12
+ mfspr r12,SPRN_HSRR1 /* and HSRR1 */
+ mtspr SPRN_HSRR1,r10
+ HRFI_TO_KERNEL
+ .else
+ mtspr SPRN_SRR0,r12
+ mfspr r12,SPRN_SRR1 /* and SRR1 */
+ mtspr SPRN_SRR1,r10
+ RFI_TO_KERNEL
+ .endif
+ b . /* prevent speculative execution */
+.endm
+
+.macro EXCEPTION_PROLOG_2_VIRT label, hsrr
+#ifdef CONFIG_RELOCATABLE
+ .if \hsrr
+ mfspr r11,SPRN_HSRR0 /* save HSRR0 */
+ .else
+ mfspr r11,SPRN_SRR0 /* save SRR0 */
+ .endif
+ LOAD_HANDLER(r12, \label\())
+ mtctr r12
+ .if \hsrr
+ mfspr r12,SPRN_HSRR1 /* and HSRR1 */
+ .else
+ mfspr r12,SPRN_SRR1 /* and HSRR1 */
+ .endif
+ li r10,MSR_RI
+ mtmsrd r10,1 /* Set RI (EE=0) */
+ bctr
+#else
+ .if \hsrr
+ mfspr r11,SPRN_HSRR0 /* save HSRR0 */
+ mfspr r12,SPRN_HSRR1 /* and HSRR1 */
+ .else
+ mfspr r11,SPRN_SRR0 /* save SRR0 */
+ mfspr r12,SPRN_SRR1 /* and SRR1 */
+ .endif
+ li r10,MSR_RI
+ mtmsrd r10,1 /* Set RI (EE=0) */
+ b \label
+#endif
+.endm
+
+/*
+ * Branch to label using its 0xC000 address. This results in instruction
+ * address suitable for MSR[IR]=0 or 1, which allows relocation to be turned
+ * on using mtmsr rather than rfid.
+ *
+ * This could set the 0xc bits for !RELOCATABLE as an immediate, rather than
+ * load KBASE for a slight optimisation.
+ */
+#define BRANCH_TO_C000(reg, label) \
+ __LOAD_HANDLER(reg, label); \
+ mtctr reg; \
+ bctr
+
+#ifdef CONFIG_RELOCATABLE
+#define BRANCH_TO_COMMON(reg, label) \
+ __LOAD_HANDLER(reg, label); \
+ mtctr reg; \
+ bctr
+
+#define BRANCH_LINK_TO_FAR(label) \
+ __LOAD_FAR_HANDLER(r12, label); \
+ mtctr r12; \
+ bctrl
+
+#else
+#define BRANCH_TO_COMMON(reg, label) \
+ b label
+
+#define BRANCH_LINK_TO_FAR(label) \
+ bl label
+#endif
+
+#ifdef CONFIG_KVM_BOOK3S_64_HANDLER
+
+#ifdef CONFIG_RELOCATABLE
+/*
+ * KVM requires __LOAD_FAR_HANDLER.
+ *
+ * __BRANCH_TO_KVM_EXIT branches are also a special case because they
+ * explicitly use r9 then reload it from PACA before branching. Hence
+ * the double-underscore.
+ */
+#define __BRANCH_TO_KVM_EXIT(area, label) \
+ mfctr r9; \
+ std r9,HSTATE_SCRATCH1(r13); \
+ __LOAD_FAR_HANDLER(r9, label); \
+ mtctr r9; \
+ ld r9,area+EX_R9(r13); \
+ bctr
+
+#else
+#define __BRANCH_TO_KVM_EXIT(area, label) \
+ ld r9,area+EX_R9(r13); \
+ b label
+#endif
+
+#ifdef CONFIG_KVM_BOOK3S_HV_POSSIBLE
+/*
+ * If hv is possible, interrupts come into to the hv version
+ * of the kvmppc_interrupt code, which then jumps to the PR handler,
+ * kvmppc_interrupt_pr, if the guest is a PR guest.
+ */
+#define kvmppc_interrupt kvmppc_interrupt_hv
+#else
+#define kvmppc_interrupt kvmppc_interrupt_pr
+#endif
+
+.macro KVMTEST hsrr, n
+ lbz r10,HSTATE_IN_GUEST(r13)
+ cmpwi r10,0
+ .if \hsrr
+ bne do_kvm_H\n
+ .else
+ bne do_kvm_\n
+ .endif
+.endm
+
+.macro KVM_HANDLER area, hsrr, n, skip
+ .if \skip
+ cmpwi r10,KVM_GUEST_MODE_SKIP
+ beq 89f
+ .else
+ BEGIN_FTR_SECTION_NESTED(947)
+ ld r10,\area+EX_CFAR(r13)
+ std r10,HSTATE_CFAR(r13)
+ END_FTR_SECTION_NESTED(CPU_FTR_CFAR,CPU_FTR_CFAR,947)
+ .endif
+
+ BEGIN_FTR_SECTION_NESTED(948)
+ ld r10,\area+EX_PPR(r13)
+ std r10,HSTATE_PPR(r13)
+ END_FTR_SECTION_NESTED(CPU_FTR_HAS_PPR,CPU_FTR_HAS_PPR,948)
+ ld r10,\area+EX_R10(r13)
+ std r12,HSTATE_SCRATCH0(r13)
+ sldi r12,r9,32
+ /* HSRR variants have the 0x2 bit added to their trap number */
+ .if \hsrr
+ ori r12,r12,(\n + 0x2)
+ .else
+ ori r12,r12,(\n)
+ .endif
+ /* This reloads r9 before branching to kvmppc_interrupt */
+ __BRANCH_TO_KVM_EXIT(\area, kvmppc_interrupt)
+
+ .if \skip
+89: mtocrf 0x80,r9
+ ld r9,\area+EX_R9(r13)
+ ld r10,\area+EX_R10(r13)
+ .if \hsrr
+ b kvmppc_skip_Hinterrupt
+ .else
+ b kvmppc_skip_interrupt
+ .endif
+ .endif
+.endm
+
+#else
+.macro KVMTEST hsrr, n
+.endm
+.macro KVM_HANDLER area, hsrr, n, skip
+.endm
+#endif
+
+#define EXCEPTION_PROLOG_COMMON_1() \
+ std r9,_CCR(r1); /* save CR in stackframe */ \
+ std r11,_NIP(r1); /* save SRR0 in stackframe */ \
+ std r12,_MSR(r1); /* save SRR1 in stackframe */ \
+ std r10,0(r1); /* make stack chain pointer */ \
+ std r0,GPR0(r1); /* save r0 in stackframe */ \
+ std r10,GPR1(r1); /* save r1 in stackframe */ \
+
+
+/*
+ * The common exception prolog is used for all except a few exceptions
+ * such as a segment miss on a kernel address. We have to be prepared
+ * to take another exception from the point where we first touch the
+ * kernel stack onwards.
+ *
+ * On entry r13 points to the paca, r9-r13 are saved in the paca,
+ * r9 contains the saved CR, r11 and r12 contain the saved SRR0 and
+ * SRR1, and relocation is on.
+ */
+#define EXCEPTION_PROLOG_COMMON(n, area) \
+ andi. r10,r12,MSR_PR; /* See if coming from user */ \
+ mr r10,r1; /* Save r1 */ \
+ subi r1,r1,INT_FRAME_SIZE; /* alloc frame on kernel stack */ \
+ beq- 1f; \
+ ld r1,PACAKSAVE(r13); /* kernel stack to use */ \
+1: cmpdi cr1,r1,-INT_FRAME_SIZE; /* check if r1 is in userspace */ \
+ blt+ cr1,3f; /* abort if it is */ \
+ li r1,(n); /* will be reloaded later */ \
+ sth r1,PACA_TRAP_SAVE(r13); \
+ std r3,area+EX_R3(r13); \
+ addi r3,r13,area; /* r3 -> where regs are saved*/ \
+ RESTORE_CTR(r1, area); \
+ b bad_stack; \
+3: EXCEPTION_PROLOG_COMMON_1(); \
+ kuap_save_amr_and_lock r9, r10, cr1, cr0; \
+ beq 4f; /* if from kernel mode */ \
+ ACCOUNT_CPU_USER_ENTRY(r13, r9, r10); \
+ SAVE_PPR(area, r9); \
+4: EXCEPTION_PROLOG_COMMON_2(area) \
+ EXCEPTION_PROLOG_COMMON_3(n) \
+ ACCOUNT_STOLEN_TIME
+
+/* Save original regs values from save area to stack frame. */
+#define EXCEPTION_PROLOG_COMMON_2(area) \
+ ld r9,area+EX_R9(r13); /* move r9, r10 to stackframe */ \
+ ld r10,area+EX_R10(r13); \
+ std r9,GPR9(r1); \
+ std r10,GPR10(r1); \
+ ld r9,area+EX_R11(r13); /* move r11 - r13 to stackframe */ \
+ ld r10,area+EX_R12(r13); \
+ ld r11,area+EX_R13(r13); \
+ std r9,GPR11(r1); \
+ std r10,GPR12(r1); \
+ std r11,GPR13(r1); \
+ BEGIN_FTR_SECTION_NESTED(66); \
+ ld r10,area+EX_CFAR(r13); \
+ std r10,ORIG_GPR3(r1); \
+ END_FTR_SECTION_NESTED(CPU_FTR_CFAR, CPU_FTR_CFAR, 66); \
+ GET_CTR(r10, area); \
+ std r10,_CTR(r1);
+
+#define EXCEPTION_PROLOG_COMMON_3(n) \
+ std r2,GPR2(r1); /* save r2 in stackframe */ \
+ SAVE_4GPRS(3, r1); /* save r3 - r6 in stackframe */ \
+ SAVE_2GPRS(7, r1); /* save r7, r8 in stackframe */ \
+ mflr r9; /* Get LR, later save to stack */ \
+ ld r2,PACATOC(r13); /* get kernel TOC into r2 */ \
+ std r9,_LINK(r1); \
+ lbz r10,PACAIRQSOFTMASK(r13); \
+ mfspr r11,SPRN_XER; /* save XER in stackframe */ \
+ std r10,SOFTE(r1); \
+ std r11,_XER(r1); \
+ li r9,(n)+1; \
+ std r9,_TRAP(r1); /* set trap number */ \
+ li r10,0; \
+ ld r11,exception_marker@toc(r2); \
+ std r10,RESULT(r1); /* clear regs->result */ \
+ std r11,STACK_FRAME_OVERHEAD-16(r1); /* mark the frame */
+
+#define RUNLATCH_ON \
+BEGIN_FTR_SECTION \
+ ld r3, PACA_THREAD_INFO(r13); \
+ ld r4,TI_LOCAL_FLAGS(r3); \
+ andi. r0,r4,_TLF_RUNLATCH; \
+ beql ppc64_runlatch_on_trampoline; \
+END_FTR_SECTION_IFSET(CPU_FTR_CTRL)
+
+#define EXCEPTION_COMMON(area, trap) \
+ EXCEPTION_PROLOG_COMMON(trap, area); \
+
+/*
+ * Exception where stack is already set in r1, r1 is saved in r10
+ */
+#define EXCEPTION_COMMON_STACK(area, trap) \
+ EXCEPTION_PROLOG_COMMON_1(); \
+ kuap_save_amr_and_lock r9, r10, cr1; \
+ EXCEPTION_PROLOG_COMMON_2(area); \
+ EXCEPTION_PROLOG_COMMON_3(trap)
+
+/*
+ * When the idle code in power4_idle puts the CPU into NAP mode,
+ * it has to do so in a loop, and relies on the external interrupt
+ * and decrementer interrupt entry code to get it out of the loop.
+ * It sets the _TLF_NAPPING bit in current_thread_info()->local_flags
+ * to signal that it is in the loop and needs help to get out.
+ */
+#ifdef CONFIG_PPC_970_NAP
+#define FINISH_NAP \
+BEGIN_FTR_SECTION \
+ ld r11, PACA_THREAD_INFO(r13); \
+ ld r9,TI_LOCAL_FLAGS(r11); \
+ andi. r10,r9,_TLF_NAPPING; \
+ bnel power4_fixup_nap; \
+END_FTR_SECTION_IFSET(CPU_FTR_CAN_NAP)
+#else
+#define FINISH_NAP
+#endif
+
+
/*
* There are a few constraints to be concerned with.
* - Real mode exceptions code/data must be located at their physical location.
projects / linux-2.6-block.git / commitdiff