#define IR_dprintk(level, fmt, ...) \
do { \
if (rc_core_debug >= level) \
- pr_debug("%s: " fmt, __func__, ##__VA_ARGS__); \
+ printk(KERN_DEBUG pr_fmt(fmt), ##__VA_ARGS__); \
} while (0)
enum rc_driver_type {
* @input_dev: the input child device used to communicate events to userspace
* @driver_type: specifies if protocol decoding is done in hardware or software
* @idle: used to keep track of RX state
- * @allowed_protocols: bitmask with the supported RC_BIT_* protocols for each
- * filter type
- * @enabled_protocols: bitmask with the enabled RC_BIT_* protocols for each
- * filter type
- * @scanmask: some hardware decoders are not capable of providing the full
+ * @allowed_protocols: bitmask with the supported RC_BIT_* protocols
+ * @enabled_protocols: bitmask with the enabled RC_BIT_* protocols
+ * @allowed_wakeup_protocols: bitmask with the supported RC_BIT_* wakeup protocols
+ * @enabled_wakeup_protocols: bitmask with the enabled RC_BIT_* wakeup protocols
+ * @scancode_filter: scancode filter
+ * @scancode_wakeup_filter: scancode wakeup filters
+ * @scancode_mask: some hardware decoders are not capable of providing the full
* scancode to the application. As this is a hardware limit, we can't do
* anything with it. Yet, as the same keycode table can be used with other
* devices, a mask is provided to allow its usage. Drivers should generally
* leave this field in blank
+ * @users: number of current users of the device
* @priv: driver-specific data
* @keylock: protects the remaining members of the struct
* @keypressed: whether a key is currently pressed
* @keyup_jiffies: time (in jiffies) when the current keypress should be released
* @timer_keyup: timer for releasing a keypress
* @last_keycode: keycode of last keypress
+ * @last_protocol: protocol of last keypress
* @last_scancode: scancode of last keypress
* @last_toggle: toggle value of last command
* @timeout: optional time after which device stops sending data
* @max_timeout: maximum timeout supported by device
* @rx_resolution : resolution (in ns) of input sampler
* @tx_resolution: resolution (in ns) of output sampler
- * @scancode_filters: scancode filters (indexed by enum rc_filter_type)
* @change_protocol: allow changing the protocol used on hardware decoders
* @change_wakeup_protocol: allow changing the protocol used for wakeup
* filtering
* device doesn't interrupt host until it sees IR pulses
* @s_learning_mode: enable wide band receiver used for learning
* @s_carrier_report: enable carrier reports
- * @s_filter: set the scancode filter
+ * @s_filter: set the scancode filter
* @s_wakeup_filter: set the wakeup scancode filter
*/
struct rc_dev {
struct input_dev *input_dev;
enum rc_driver_type driver_type;
bool idle;
- u64 allowed_protocols[RC_FILTER_MAX];
- u64 enabled_protocols[RC_FILTER_MAX];
+ u64 allowed_protocols;
+ u64 enabled_protocols;
+ u64 allowed_wakeup_protocols;
+ u64 enabled_wakeup_protocols;
+ struct rc_scancode_filter scancode_filter;
+ struct rc_scancode_filter scancode_wakeup_filter;
+ u32 scancode_mask;
u32 users;
- u32 scanmask;
void *priv;
spinlock_t keylock;
bool keypressed;
unsigned long keyup_jiffies;
struct timer_list timer_keyup;
u32 last_keycode;
+ enum rc_type last_protocol;
u32 last_scancode;
u8 last_toggle;
u32 timeout;
u32 max_timeout;
u32 rx_resolution;
u32 tx_resolution;
- struct rc_scancode_filter scancode_filters[RC_FILTER_MAX];
int (*change_protocol)(struct rc_dev *dev, u64 *rc_type);
int (*change_wakeup_protocol)(struct rc_dev *dev, u64 *rc_type);
int (*open)(struct rc_dev *dev);
#define to_rc_dev(d) container_of(d, struct rc_dev, dev)
-static inline bool rc_protocols_allowed(struct rc_dev *rdev, u64 protos)
-{
- return rdev->allowed_protocols[RC_FILTER_NORMAL] & protos;
-}
-
-/* should be called prior to registration or with mutex held */
-static inline void rc_set_allowed_protocols(struct rc_dev *rdev, u64 protos)
-{
- rdev->allowed_protocols[RC_FILTER_NORMAL] = protos;
-}
-
-static inline bool rc_protocols_enabled(struct rc_dev *rdev, u64 protos)
-{
- return rdev->enabled_protocols[RC_FILTER_NORMAL] & protos;
-}
-
-/* should be called prior to registration or with mutex held */
-static inline void rc_set_enabled_protocols(struct rc_dev *rdev, u64 protos)
-{
- rdev->enabled_protocols[RC_FILTER_NORMAL] = protos;
-}
-
-/* should be called prior to registration or with mutex held */
-static inline void rc_set_allowed_wakeup_protocols(struct rc_dev *rdev,
- u64 protos)
-{
- rdev->allowed_protocols[RC_FILTER_WAKEUP] = protos;
-}
-
-/* should be called prior to registration or with mutex held */
-static inline void rc_set_enabled_wakeup_protocols(struct rc_dev *rdev,
- u64 protos)
-{
- rdev->enabled_protocols[RC_FILTER_WAKEUP] = protos;
-}
-
/*
* From rc-main.c
* Those functions can be used on any type of Remote Controller. They
void rc_close(struct rc_dev *rdev);
void rc_repeat(struct rc_dev *dev);
-void rc_keydown(struct rc_dev *dev, int scancode, u8 toggle);
-void rc_keydown_notimeout(struct rc_dev *dev, int scancode, u8 toggle);
+void rc_keydown(struct rc_dev *dev, enum rc_type protocol, u32 scancode, u8 toggle);
+void rc_keydown_notimeout(struct rc_dev *dev, enum rc_type protocol, u32 scancode, u8 toggle);
void rc_keyup(struct rc_dev *dev);
u32 rc_g_keycode_from_table(struct rc_dev *dev, u32 scancode);
memset(ev, 0, sizeof(*ev));
}
-#define IR_MAX_DURATION 0xFFFFFFFF /* a bit more than 4 seconds */
+#define IR_MAX_DURATION 500000000 /* 500 ms */
#define US_TO_NS(usec) ((usec) * 1000)
#define MS_TO_US(msec) ((msec) * 1000)
#define MS_TO_NS(msec) ((msec) * 1000 * 1000)
projects / linux-2.6-block.git / blobdiff