#define CLK_SET_RATE_PARENT BIT(2) /* propagate rate change up one level */
#define CLK_IGNORE_UNUSED BIT(3) /* do not gate even if unused */
/* unused */
-#define CLK_IS_BASIC BIT(5) /* Basic clk, can't do a to_clk_foo() */
+#define CLK_IS_BASIC BIT(5) /* deprecated, don't use */
#define CLK_GET_RATE_NOCACHE BIT(6) /* do not use the cached clk rate */
#define CLK_SET_RATE_NO_REPARENT BIT(7) /* don't re-parent on rate change */
#define CLK_GET_ACCURACY_NOCACHE BIT(8) /* do not use the cached clk accuracy */
struct clk_hw hw;
unsigned long fixed_rate;
unsigned long fixed_accuracy;
- u8 flags;
};
#define to_clk_fixed_rate(_hw) container_of(_hw, struct clk_fixed_rate, hw)
* register, and mask of mux bits are in higher 16-bit of this register.
* While setting the mux bits, higher 16-bit should also be updated to
* indicate changing mux bits.
+ * CLK_MUX_READ_ONLY - The mux registers can't be written, only read in the
+ * .get_parent clk_op.
* CLK_MUX_ROUND_CLOSEST - Use the parent rate that is closest to the desired
* frequency.
* CLK_MUX_BIG_ENDIAN - By default little endian register accesses are used for
unsigned long flags);
void clk_hw_unregister_composite(struct clk_hw *hw);
-/***
- * struct clk_gpio_gate - gpio gated clock
+/**
+ * struct clk_gpio - gpio gated clock
*
* @hw: handle between common and hardware-specific interfaces
* @gpiod: gpio descriptor
*
- * Clock with a gpio control for enabling and disabling the parent clock.
- * Implements .enable, .disable and .is_enabled
+ * Clock with a gpio control for enabling and disabling the parent clock
+ * or switching between two parents by asserting or deasserting the gpio.
+ *
+ * Implements .enable, .disable and .is_enabled or
+ * .get_parent, .set_parent and .determine_rate depending on which clk_ops
+ * is used.
*/
-
struct clk_gpio {
struct clk_hw hw;
struct gpio_desc *gpiod;
unsigned long flags);
void clk_hw_unregister_gpio_gate(struct clk_hw *hw);
-/**
- * struct clk_gpio_mux - gpio controlled clock multiplexer
- *
- * @hw: see struct clk_gpio
- * @gpiod: gpio descriptor to select the parent of this clock multiplexer
- *
- * Clock with a gpio control for selecting the parent clock.
- * Implements .get_parent, .set_parent and .determine_rate
- */
-
extern const struct clk_ops clk_gpio_mux_ops;
struct clk *clk_register_gpio_mux(struct device *dev, const char *name,
const char * const *parent_names, u8 num_parents, struct gpio_desc *gpiod,
unsigned long flags);
void clk_hw_unregister_gpio_mux(struct clk_hw *hw);
-/**
- * clk_register - allocate a new clock, register it and return an opaque cookie
- * @dev: device that is registering this clock
- * @hw: link to hardware-specific clock data
- *
- * clk_register is the primary interface for populating the clock tree with new
- * clock nodes. It returns a pointer to the newly allocated struct clk which
- * cannot be dereferenced by driver code but may be used in conjuction with the
- * rest of the clock API. In the event of an error clk_register will return an
- * error code; drivers must test for an error code after calling clk_register.
- */
struct clk *clk_register(struct device *dev, struct clk_hw *hw);
struct clk *devm_clk_register(struct device *dev, struct clk_hw *hw);