static int serial_index(struct uart_port *port)
{
- return (serial8250_reg.minor - 64) + port->line;
+ return port->minor - 64;
}
static unsigned int skip_txen_test; /* force skip of txen test at init time */
return 0;
}
-static inline int ns16550a_goto_highspeed(struct uart_8250_port *up)
-{
- unsigned char status;
-
- status = serial_in(up, 0x04); /* EXCR2 */
-#define PRESL(x) ((x) & 0x30)
- if (PRESL(status) == 0x10) {
- /* already in high speed mode */
- return 0;
- } else {
- status &= ~0xB0; /* Disable LOCK, mask out PRESL[01] */
- status |= 0x10; /* 1.625 divisor for baud_base --> 921600 */
- serial_out(up, 0x04, status);
- }
- return 1;
-}
-
/*
* We know that the chip has FIFOs. Does it have an EFR? The
* EFR is located in the same register position as the IIR and
jiffies + uart_poll_timeout(&up->port) + HZ / 5);
}
+static int univ8250_setup_irq(struct uart_8250_port *up)
+{
+ struct uart_port *port = &up->port;
+ int retval = 0;
+
+ /*
+ * The above check will only give an accurate result the first time
+ * the port is opened so this value needs to be preserved.
+ */
+ if (up->bugs & UART_BUG_THRE) {
+ pr_debug("ttyS%d - using backup timer\n", serial_index(port));
+
+ up->timer.function = serial8250_backup_timeout;
+ up->timer.data = (unsigned long)up;
+ mod_timer(&up->timer, jiffies +
+ uart_poll_timeout(port) + HZ / 5);
+ }
+
+ /*
+ * If the "interrupt" for this port doesn't correspond with any
+ * hardware interrupt, we use a timer-based system. The original
+ * driver used to do this with IRQ0.
+ */
+ if (!port->irq) {
+ up->timer.data = (unsigned long)up;
+ mod_timer(&up->timer, jiffies + uart_poll_timeout(port));
+ } else
+ retval = serial_link_irq_chain(up);
+
+ return retval;
+}
+
+static void univ8250_release_irq(struct uart_8250_port *up)
+{
+ struct uart_port *port = &up->port;
+
+ del_timer_sync(&up->timer);
+ up->timer.function = serial8250_timeout;
+ if (port->irq)
+ serial_unlink_irq_chain(up);
+}
+
static unsigned int serial8250_tx_empty(struct uart_port *port)
{
struct uart_8250_port *up = up_to_u8250p(port);
if ((!(iir1 & UART_IIR_NO_INT) && (iir & UART_IIR_NO_INT)) ||
up->port.flags & UPF_BUG_THRE) {
up->bugs |= UART_BUG_THRE;
- pr_debug("ttyS%d - using backup timer\n",
- serial_index(port));
}
}
- /*
- * The above check will only give an accurate result the first time
- * the port is opened so this value needs to be preserved.
- */
- if (up->bugs & UART_BUG_THRE) {
- up->timer.function = serial8250_backup_timeout;
- up->timer.data = (unsigned long)up;
- mod_timer(&up->timer, jiffies +
- uart_poll_timeout(port) + HZ / 5);
- }
-
- /*
- * If the "interrupt" for this port doesn't correspond with any
- * hardware interrupt, we use a timer-based system. The original
- * driver used to do this with IRQ0.
- */
- if (!port->irq) {
- up->timer.data = (unsigned long)up;
- mod_timer(&up->timer, jiffies + uart_poll_timeout(port));
- } else {
- retval = serial_link_irq_chain(up);
- if (retval)
- goto out;
- }
+ retval = up->ops->setup_irq(up);
+ if (retval)
+ goto out;
/*
* Now, initialize the UART
is variable. So, let's just don't test if we receive
TX irq. This way, we'll never enable UART_BUG_TXEN.
*/
- if (skip_txen_test || up->port.flags & UPF_NO_TXEN_TEST)
+ if (up->port.flags & UPF_NO_TXEN_TEST)
goto dont_test_tx_en;
/*
serial_port_in(port, UART_RX);
serial8250_rpm_put(up);
- del_timer_sync(&up->timer);
- up->timer.function = serial8250_timeout;
- if (port->irq)
- serial_unlink_irq_chain(up);
+ up->ops->release_irq(up);
}
EXPORT_SYMBOL_GPL(serial8250_do_shutdown);
#endif
};
+static const struct uart_8250_ops univ8250_driver_ops = {
+ .setup_irq = univ8250_setup_irq,
+ .release_irq = univ8250_release_irq,
+};
+
static struct uart_8250_port serial8250_ports[UART_NR];
/**
}
EXPORT_SYMBOL(serial8250_set_isa_configurator);
+static void serial8250_init_port(struct uart_8250_port *up)
+{
+ struct uart_port *port = &up->port;
+
+ spin_lock_init(&port->lock);
+ port->ops = &serial8250_pops;
+
+ up->cur_iotype = 0xFF;
+}
+
+static void serial8250_set_defaults(struct uart_8250_port *up)
+{
+ struct uart_port *port = &up->port;
+
+ set_io_from_upio(port);
+}
+
static void __init serial8250_isa_init_ports(void)
{
struct uart_8250_port *up;
struct uart_port *port = &up->port;
port->line = i;
- spin_lock_init(&port->lock);
+ serial8250_init_port(up);
init_timer(&up->timer);
up->timer.function = serial8250_timeout;
- up->cur_iotype = 0xFF;
+
+ up->ops = &univ8250_driver_ops;
/*
* ALPHA_KLUDGE_MCR needs to be killed.
*/
up->mcr_mask = ~ALPHA_KLUDGE_MCR;
up->mcr_force = ALPHA_KLUDGE_MCR;
-
- port->ops = &serial8250_pops;
}
if (share_irqs)
port->membase = old_serial_port[i].iomem_base;
port->iotype = old_serial_port[i].io_type;
port->regshift = old_serial_port[i].iomem_reg_shift;
- set_io_from_upio(port);
+ serial8250_set_defaults(up);
+
port->irqflags |= irqflag;
if (serial8250_isa_config != NULL)
serial8250_isa_config(i, &up->port, &up->capabilities);
-
}
}
up->port.dev = dev;
+ if (skip_txen_test)
+ up->port.flags |= UPF_NO_TXEN_TEST;
+
if (up->port.flags & UPF_FIXED_TYPE)
serial8250_init_fixed_type_port(up, up->port.type);
*
* The console_lock must be held when we get here.
*/
-static void
-serial8250_console_write(struct console *co, const char *s, unsigned int count)
+static void serial8250_console_write(struct uart_8250_port *up, const char *s,
+ unsigned int count)
{
- struct uart_8250_port *up = &serial8250_ports[co->index];
struct uart_port *port = &up->port;
unsigned long flags;
unsigned int ier;
serial8250_rpm_put(up);
}
-static int serial8250_console_setup(struct console *co, char *options)
+static void univ8250_console_write(struct console *co, const char *s,
+ unsigned int count)
{
- struct uart_port *port;
+ struct uart_8250_port *up = &serial8250_ports[co->index];
+
+ serial8250_console_write(up, s, count);
+}
+
+static int serial8250_console_setup(struct uart_8250_port *up, char *options)
+{
+ struct uart_port *port = &up->port;
int baud = 9600;
int bits = 8;
int parity = 'n';
int flow = 'n';
+ if (!port->iobase && !port->membase)
+ return -ENODEV;
+
+ if (options)
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+
+ return uart_set_options(port, port->cons, baud, parity, bits, flow);
+}
+
+static int univ8250_console_setup(struct console *co, char *options)
+{
+ struct uart_8250_port *up;
+
/*
* Check whether an invalid uart number has been specified, and
* if so, search for the first available port that does have
*/
if (co->index >= nr_uarts)
co->index = 0;
- port = &serial8250_ports[co->index].port;
- if (!port->iobase && !port->membase)
- return -ENODEV;
+ up = &serial8250_ports[co->index];
+ /* link port to console */
+ up->port.cons = co;
- if (options)
- uart_parse_options(options, &baud, &parity, &bits, &flow);
-
- return uart_set_options(port, co, baud, parity, bits, flow);
+ return serial8250_console_setup(up, options);
}
-static int serial8250_console_early_setup(void)
+/**
+ * univ8250_console_match - non-standard console matching
+ * @co: registering console
+ * @name: name from console command line
+ * @idx: index from console command line
+ * @options: ptr to option string from console command line
+ *
+ * Only attempts to match console command lines of the form:
+ * console=uart<>,io|mmio|mmio32,<addr>,<options>
+ * console=uart<>,<addr>,options
+ * This form is used to register an initial earlycon boot console and
+ * replace it with the serial8250_console at 8250 driver init.
+ *
+ * Performs console setup for a match (as required by interface)
+ *
+ * Returns 0 if console matches; otherwise non-zero to use default matching
+ */
+static int univ8250_console_match(struct console *co, char *name, int idx,
+ char *options)
{
- return serial8250_find_port_for_earlycon();
+ char match[] = "uart"; /* 8250-specific earlycon name */
+ unsigned char iotype;
+ unsigned long addr;
+ int i;
+
+ if (strncmp(name, match, 4) != 0)
+ return -ENODEV;
+
+ if (uart_parse_earlycon(options, &iotype, &addr, &options))
+ return -ENODEV;
+
+ /* try to match the port specified on the command line */
+ for (i = 0; i < nr_uarts; i++) {
+ struct uart_port *port = &serial8250_ports[i].port;
+
+ if (port->iotype != iotype)
+ continue;
+ if ((iotype == UPIO_MEM || iotype == UPIO_MEM32) &&
+ (port->mapbase != addr))
+ continue;
+ if (iotype == UPIO_PORT && port->iobase != addr)
+ continue;
+
+ co->index = i;
+ return univ8250_console_setup(co, options);
+ }
+
+ return -ENODEV;
}
-static struct console serial8250_console = {
+static struct console univ8250_console = {
.name = "ttyS",
- .write = serial8250_console_write,
+ .write = univ8250_console_write,
.device = uart_console_device,
- .setup = serial8250_console_setup,
- .early_setup = serial8250_console_early_setup,
+ .setup = univ8250_console_setup,
+ .match = univ8250_console_match,
.flags = CON_PRINTBUFFER | CON_ANYTIME,
.index = -1,
.data = &serial8250_reg,
};
-static int __init serial8250_console_init(void)
+static int __init univ8250_console_init(void)
{
serial8250_isa_init_ports();
- register_console(&serial8250_console);
+ register_console(&univ8250_console);
return 0;
}
-console_initcall(serial8250_console_init);
-
-int serial8250_find_port(struct uart_port *p)
-{
- int line;
- struct uart_port *port;
-
- for (line = 0; line < nr_uarts; line++) {
- port = &serial8250_ports[line].port;
- if (uart_match_port(p, port))
- return line;
- }
- return -ENODEV;
-}
+console_initcall(univ8250_console_init);
-#define SERIAL8250_CONSOLE &serial8250_console
+#define SERIAL8250_CONSOLE &univ8250_console
#else
#define SERIAL8250_CONSOLE NULL
#endif
p->type = port->type;
p->line = port->line;
- set_io_from_upio(p);
+ serial8250_set_defaults(up_to_u8250p(p));
+
if (port->serial_in)
p->serial_in = port->serial_in;
if (port->serial_out)
p->serial_out = port->serial_out;
if (port->handle_irq)
p->handle_irq = port->handle_irq;
- else
- p->handle_irq = serial8250_default_handle_irq;
return 0;
}
if (up->port.dev)
uart->port.dev = up->port.dev;
+ if (skip_txen_test)
+ uart->port.flags |= UPF_NO_TXEN_TEST;
+
if (up->port.flags & UPF_FIXED_TYPE)
serial8250_init_fixed_type_port(uart, up->port.type);
- set_io_from_upio(&uart->port);
+ serial8250_set_defaults(uart);
+
/* Possibly override default I/O functions. */
if (up->port.serial_in)
uart->port.serial_in = up->port.serial_in;
uart_remove_one_port(&serial8250_reg, &uart->port);
if (serial8250_isa_devs) {
uart->port.flags &= ~UPF_BOOT_AUTOCONF;
+ if (skip_txen_test)
+ uart->port.flags |= UPF_NO_TXEN_TEST;
uart->port.type = PORT_UNKNOWN;
uart->port.dev = &serial8250_isa_devs->dev;
- uart->capabilities = uart_config[uart->port.type].flags;
+ uart->capabilities = 0;
uart_add_one_port(&serial8250_reg, &uart->port);
} else {
uart->port.dev = NULL;