thermal: ti-soc-thermal: remove dead code

[linux-2.6-block.git] / drivers / thermal / ti-soc-thermal / ti-bandgap.h

diff --git a/drivers/thermal/ti-soc-thermal/ti-bandgap.h b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
index 209c664c28235a57aec27fd0d23dbf616b9641d8..68d39ad4324127e86bbc710c6b01a23d77a912ae 100644 (file)
--- a/drivers/thermal/ti-soc-thermal/ti-bandgap.h
+++ b/drivers/thermal/ti-soc-thermal/ti-bandgap.h
@@ -78,11 +78,8 @@
  * @bgap_mask_ctrl: BANDGAP_MASK_CTRL register offset
  * @mask_hot_mask: mask to bandgap_mask_ctrl.mask_hot
  * @mask_cold_mask: mask to bandgap_mask_ctrl.mask_cold
- * @mask_sidlemode_mask: mask to bandgap_mask_ctrl.mask_sidlemode
  * @mask_counter_delay_mask: mask to bandgap_mask_ctrl.mask_counter_delay
  * @mask_freeze_mask: mask to bandgap_mask_ctrl.mask_free
- * @mask_clear_mask: mask to bandgap_mask_ctrl.mask_clear
- * @mask_clear_accum_mask: mask to bandgap_mask_ctrl.mask_clear_accum
  * @bgap_mode_ctrl: BANDGAP_MODE_CTRL register offset
  * @mode_ctrl_mask: mask to bandgap_mode_ctrl.mode_ctrl
  * @bgap_counter: BANDGAP_COUNTER register offset
@@ -91,21 +88,13 @@
  * @threshold_thot_mask: mask to bandgap_threhold.thot
  * @threshold_tcold_mask: mask to bandgap_threhold.tcold
  * @tshut_threshold: TSHUT_THRESHOLD register offset (TSHUT thresholds)
- * @tshut_efuse_mask: mask to tshut_threshold.tshut_efuse
- * @tshut_efuse_shift: shift to tshut_threshold.tshut_efuse
  * @tshut_hot_mask: mask to tshut_threhold.thot
  * @tshut_cold_mask: mask to tshut_threhold.thot
  * @bgap_status: BANDGAP_STATUS register offset
- * @status_clean_stop_mask: mask to bandgap_status.clean_stop
- * @status_bgap_alert_mask: mask to bandgap_status.bandgap_alert
  * @status_hot_mask: mask to bandgap_status.hot
  * @status_cold_mask: mask to bandgap_status.cold
- * @bgap_cumul_dtemp: BANDGAP_CUMUL_DTEMP register offset
- * @ctrl_dtemp_0: CTRL_DTEMP0 register offset
  * @ctrl_dtemp_1: CTRL_DTEMP1 register offset
  * @ctrl_dtemp_2: CTRL_DTEMP2 register offset
- * @ctrl_dtemp_3: CTRL_DTEMP3 register offset
- * @ctrl_dtemp_4: CTRL_DTEMP4 register offset
  * @bgap_efuse: BANDGAP_EFUSE register offset
  *
  * The register offsets and bitfields might change across
@@ -121,17 +110,14 @@ struct temp_sensor_registers {
        u32     temp_sensor_ctrl;
        u32     bgap_tempsoff_mask;
        u32     bgap_soc_mask;
-       u32     bgap_eocz_mask; /* not used: but needs revisit */
+       u32     bgap_eocz_mask;
        u32     bgap_dtemp_mask;
 
        u32     bgap_mask_ctrl;
        u32     mask_hot_mask;
        u32     mask_cold_mask;
-       u32     mask_sidlemode_mask; /* not used: but may be needed for pm */
        u32     mask_counter_delay_mask;
        u32     mask_freeze_mask;
-       u32     mask_clear_mask; /* not used: but needed for trending */
-       u32     mask_clear_accum_mask; /* not used: but needed for trending */
 
        u32     bgap_mode_ctrl;
        u32     mode_ctrl_mask;
@@ -144,23 +130,15 @@ struct temp_sensor_registers {
        u32     threshold_tcold_mask;
 
        u32     tshut_threshold;
-       u32     tshut_efuse_mask; /* not used */
-       u32     tshut_efuse_shift; /* not used */
        u32     tshut_hot_mask;
        u32     tshut_cold_mask;
 
        u32     bgap_status;
-       u32     status_clean_stop_mask; /* not used: but needed for trending */
-       u32     status_bgap_alert_mask; /* not used */
        u32     status_hot_mask;
        u32     status_cold_mask;
 
-       u32     bgap_cumul_dtemp; /* not used: but needed for trending */
-       u32     ctrl_dtemp_0; /* not used: but needed for trending */
-       u32     ctrl_dtemp_1; /* not used: but needed for trending */
-       u32     ctrl_dtemp_2; /* not used: but needed for trending */
-       u32     ctrl_dtemp_3; /* not used: but needed for trending */
-       u32     ctrl_dtemp_4; /* not used: but needed for trending */
+       u32     ctrl_dtemp_1;
+       u32     ctrl_dtemp_2;
        u32     bgap_efuse;
 };
 
@@ -172,11 +150,6 @@ struct temp_sensor_registers {
  * @t_cold: temperature to trigger a thermal alert (low initial value)
  * @min_freq: sensor minimum clock rate
  * @max_freq: sensor maximum clock rate
- * @max_temp: sensor maximum temperature
- * @min_temp: sensor minimum temperature
- * @hyst_val: temperature hysteresis considered while converting ADC values
- * @update_int1: update interval
- * @update_int2: update interval
  *
  * This data structure will hold the required thresholds and temperature limits
  * for a specific temperature sensor, like shutdown temperature, alert
@@ -189,11 +162,6 @@ struct temp_sensor_data {
        u32     t_cold;
        u32     min_freq;
        u32     max_freq;
-       int     max_temp;
-       int     min_temp;
-       int     hyst_val;
-       u32     update_int1; /* not used */
-       u32     update_int2; /* not used */
 };
 
 struct ti_bandgap_data;
@@ -316,8 +284,6 @@ struct ti_temp_sensor {
  *
  * TI_BANDGAP_FEATURE_ERRATA_814 - used to workaorund when the bandgap device
  *     has Errata 814
- * TI_BANDGAP_FEATURE_ERRATA_813 - used to workaorund when the bandgap device
- *     has Errata 813
  * TI_BANDGAP_FEATURE_UNRELIABLE - used when the sensor readings are too
  *     inaccurate.
  * TI_BANDGAP_HAS(b, f) - macro to check if a bandgap device is capable of a
@@ -334,8 +300,7 @@ struct ti_temp_sensor {
 #define TI_BANDGAP_FEATURE_COUNTER_DELAY       BIT(8)
 #define TI_BANDGAP_FEATURE_HISTORY_BUFFER      BIT(9)
 #define TI_BANDGAP_FEATURE_ERRATA_814          BIT(10)
-#define TI_BANDGAP_FEATURE_ERRATA_813          BIT(11)
-#define TI_BANDGAP_FEATURE_UNRELIABLE          BIT(12)
+#define TI_BANDGAP_FEATURE_UNRELIABLE          BIT(11)
 #define TI_BANDGAP_HAS(b, f)                   \
                        ((b)->conf->features & TI_BANDGAP_FEATURE_ ## f)