staging: wilc1000: remove commented code

[linux-2.6-block.git] / drivers / staging / wilc1000 / wilc_wlan.c

diff --git a/drivers/staging/wilc1000/wilc_wlan.c b/drivers/staging/wilc1000/wilc_wlan.c
index db9e7173c957696c9ad8c1b90d19e3007dfb1af3..3af91f770485d67f18cb6df2b590d3515192aafa 100644 (file)
--- a/drivers/staging/wilc1000/wilc_wlan.c
+++ b/drivers/staging/wilc1000/wilc_wlan.c
@@ -2044,37 +2044,6 @@ uint32_t init_chip(void)
                }
        }
 
-
-       #if 0
-       if ((chipid & 0xfff) < 0xf0) {
-               /* Setting MUX to probe sleep signal on pin 6 of J216*/
-               g_wlan.hif_func.hif_write_reg(0x1060, 0x1);
-               g_wlan.hif_func.hif_write_reg(0x1180, 0x33333333);
-               g_wlan.hif_func.hif_write_reg(0x1184, 0x33333333);
-               g_wlan.hif_func.hif_read_reg(0x1408, &reg);
-               /* set MUX for GPIO_4 (pin 4) to cortus GPIO*/
-               reg &= ~((0x7 << 16));
-               g_wlan.hif_func.hif_write_reg(0x1408, (reg | (0x7 << 12)));
-       } else {
-               /* Enable test bus*/
-               g_wlan.hif_func.hif_write_reg(0x1060, 0x1);
-               /* Rotate bus signals to get sleep signal on pin 6 like it was on previous chips*/
-               g_wlan.hif_func.hif_write_reg(0x1188, 0x70);
-               /* Set output of pin 6 to test bus 0x1*/
-               /* Set output of pin 9 to test bus 0x2*/
-               g_wlan.hif_func.hif_write_reg(0x1180, 0x200100);
-               g_wlan.hif_func.hif_read_reg(0x1408, &reg);
-
-               /* set MUX for GPIO_4 (pin 4) to cortus GPIO*/
-               reg &= ~((0x7 << 16));
-               /* set MUX for GPIO_3 (pin 6) to test bus*/
-               reg |= (0x7 << 12) | (0x7 << 24);
-               g_wlan.hif_func.hif_write_reg(0x1408, reg);
-       }
-       #endif
-
-
-
        release_bus(RELEASE_ONLY);
 
        return ret;