unsigned int x2, unsigned int y2)
{
elantech_set_slot(dev, 0, num_fingers != 0, x1, y1);
- elantech_set_slot(dev, 1, num_fingers == 2, x2, y2);
+ elantech_set_slot(dev, 1, num_fingers >= 2, x2, y2);
}
/*
struct elantech_data *etd = psmouse->private;
unsigned char *packet = psmouse->packet;
unsigned char packet_type = packet[3] & 0x03;
+ unsigned int ic_version;
bool sanity_check;
if (etd->tp_dev && (packet[3] & 0x0f) == 0x06)
return PACKET_TRACKPOINT;
+ /* This represents the version of IC body. */
+ ic_version = (etd->fw_version & 0x0f0000) >> 16;
+
/*
* Sanity check based on the constant bits of a packet.
* The constant bits change depending on the value of
- * the hardware flag 'crc_enabled' but are the same for
- * every packet, regardless of the type.
+ * the hardware flag 'crc_enabled' and the version of
+ * the IC body, but are the same for every packet,
+ * regardless of the type.
*/
if (etd->crc_enabled)
sanity_check = ((packet[3] & 0x08) == 0x00);
+ else if (ic_version == 7 && etd->samples[1] == 0x2A)
+ sanity_check = ((packet[3] & 0x1c) == 0x10);
else
sanity_check = ((packet[0] & 0x0c) == 0x04 &&
(packet[3] & 0x1c) == 0x10);
return PSMOUSE_FULL_PACKET;
}
+/*
+ * This writes the reg_07 value again to the hardware at the end of every
+ * set_rate call because the register loses its value. reg_07 allows setting
+ * absolute mode on v4 hardware
+ */
+static void elantech_set_rate_restore_reg_07(struct psmouse *psmouse,
+ unsigned int rate)
+{
+ struct elantech_data *etd = psmouse->private;
+
+ etd->original_set_rate(psmouse, rate);
+ if (elantech_write_reg(psmouse, 0x07, etd->reg_07))
+ psmouse_err(psmouse, "restoring reg_07 failed\n");
+}
+
/*
* Put the touchpad into absolute mode
*/
* Asus K53SV 0x450f01 78, 15, 0c 2 hw buttons
* Asus G46VW 0x460f02 00, 18, 0c 2 hw buttons
* Asus G750JX 0x360f00 00, 16, 0c 2 hw buttons
+ * Asus TP500LN 0x381f17 10, 14, 0e clickpad
+ * Asus X750JN 0x381f17 10, 14, 0e clickpad
* Asus UX31 0x361f00 20, 15, 0e clickpad
* Asus UX32VD 0x361f02 00, 15, 0e clickpad
* Avatar AVIU-145A2 0x361f00 ? clickpad
* Fujitsu LIFEBOOK E544 0x470f00 d0, 12, 09 2 hw buttons
* Fujitsu LIFEBOOK E554 0x570f01 40, 14, 0c 2 hw buttons
+ * Fujitsu T725 0x470f01 05, 12, 09 2 hw buttons
* Fujitsu H730 0x570f00 c0, 14, 0c 3 hw buttons (**)
* Gigabyte U2442 0x450f01 58, 17, 0c 2 hw buttons
* Lenovo L430 0x350f02 b9, 15, 0c 2 hw buttons (*)
struct input_dev *dev = psmouse->dev;
struct elantech_data *etd = psmouse->private;
unsigned int x_min = 0, y_min = 0, x_max = 0, y_max = 0, width = 0;
- unsigned int x_res = 0, y_res = 0;
+ unsigned int x_res = 31, y_res = 31;
if (elantech_set_range(psmouse, &x_min, &y_min, &x_max, &y_max, &width))
return -1;
/* For X to recognize me as touchpad. */
input_set_abs_params(dev, ABS_X, x_min, x_max, 0, 0);
input_set_abs_params(dev, ABS_Y, y_min, y_max, 0, 0);
- input_abs_set_res(dev, ABS_X, x_res);
- input_abs_set_res(dev, ABS_Y, y_res);
/*
* range of pressure and width is the same as v2,
* report ABS_PRESSURE, ABS_TOOL_WIDTH for compatibility.
input_mt_init_slots(dev, ETP_MAX_FINGERS, 0);
input_set_abs_params(dev, ABS_MT_POSITION_X, x_min, x_max, 0, 0);
input_set_abs_params(dev, ABS_MT_POSITION_Y, y_min, y_max, 0, 0);
- input_abs_set_res(dev, ABS_MT_POSITION_X, x_res);
- input_abs_set_res(dev, ABS_MT_POSITION_Y, y_res);
input_set_abs_params(dev, ABS_MT_PRESSURE, ETP_PMIN_V2,
ETP_PMAX_V2, 0, 0);
/*
break;
}
+ input_abs_set_res(dev, ABS_X, x_res);
+ input_abs_set_res(dev, ABS_Y, y_res);
+ if (etd->hw_version > 1) {
+ input_abs_set_res(dev, ABS_MT_POSITION_X, x_res);
+ input_abs_set_res(dev, ABS_MT_POSITION_Y, y_res);
+ }
+
etd->y_max = y_max;
etd->width = width;
return true;
/*
- * Some models have a revision higher then 20. Meaning param[2] may
- * be 10 or 20, skip the rates check for these.
+ * Some hw_version >= 4 models have a revision higher then 20. Meaning
+ * that param[2] may be 10 or 20, skip the rates check for these.
*/
- if (param[0] == 0x46 && (param[1] & 0xef) == 0x0f && param[2] < 40)
+ if ((param[0] & 0x0f) >= 0x06 && (param[1] & 0xaf) == 0x0f &&
+ param[2] < 40)
return true;
for (i = 0; i < ARRAY_SIZE(rates); i++)
case 9:
case 10:
case 13:
+ case 14:
etd->hw_version = 4;
break;
default:
etd->capabilities[0], etd->capabilities[1],
etd->capabilities[2]);
+ if (etd->hw_version != 1) {
+ if (etd->send_cmd(psmouse, ETP_SAMPLE_QUERY, etd->samples)) {
+ psmouse_err(psmouse, "failed to query sample data\n");
+ goto init_fail;
+ }
+ psmouse_info(psmouse,
+ "Elan sample query result %02x, %02x, %02x\n",
+ etd->samples[0], etd->samples[1], etd->samples[2]);
+ }
+
if (elantech_set_absolute_mode(psmouse)) {
psmouse_err(psmouse,
"failed to put touchpad into absolute mode.\n");
goto init_fail;
}
+ if (etd->fw_version == 0x381f17) {
+ etd->original_set_rate = psmouse->set_rate;
+ psmouse->set_rate = elantech_set_rate_restore_reg_07;
+ }
+
if (elantech_set_input_params(psmouse)) {
psmouse_err(psmouse, "failed to query touchpad range.\n");
goto init_fail;
projects / linux-2.6-block.git / blobdiff