ide_dma_on(drive);
}
- if (!__blk_end_request(rq, error, nr_bytes)) {
- if (dequeue)
- HWGROUP(drive)->rq = NULL;
+ if (!blk_end_request(rq, error, nr_bytes))
ret = 0;
- }
+
+ if (ret == 0 && dequeue)
+ drive->hwif->hwgroup->rq = NULL;
return ret;
}
int ide_end_request (ide_drive_t *drive, int uptodate, int nr_sectors)
{
unsigned int nr_bytes = nr_sectors << 9;
- struct request *rq;
- unsigned long flags;
- int ret = 1;
-
- /*
- * room for locking improvements here, the calls below don't
- * need the queue lock held at all
- */
- spin_lock_irqsave(&ide_lock, flags);
- rq = HWGROUP(drive)->rq;
+ struct request *rq = drive->hwif->hwgroup->rq;
if (!nr_bytes) {
if (blk_pc_request(rq))
nr_bytes = rq->hard_cur_sectors << 9;
}
- ret = __ide_end_request(drive, rq, uptodate, nr_bytes, 1);
-
- spin_unlock_irqrestore(&ide_lock, flags);
- return ret;
+ return __ide_end_request(drive, rq, uptodate, nr_bytes, 1);
}
EXPORT_SYMBOL(ide_end_request);
-static void ide_complete_power_step(ide_drive_t *drive, struct request *rq)
-{
- struct request_pm_state *pm = rq->data;
-
-#ifdef DEBUG_PM
- printk(KERN_INFO "%s: complete_power_step(step: %d)\n",
- drive->name, pm->pm_step);
-#endif
- if (drive->media != ide_disk)
- return;
-
- switch (pm->pm_step) {
- case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */
- if (pm->pm_state == PM_EVENT_FREEZE)
- pm->pm_step = IDE_PM_COMPLETED;
- else
- pm->pm_step = IDE_PM_STANDBY;
- break;
- case IDE_PM_STANDBY: /* Suspend step 2 (standby) */
- pm->pm_step = IDE_PM_COMPLETED;
- break;
- case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */
- pm->pm_step = IDE_PM_IDLE;
- break;
- case IDE_PM_IDLE: /* Resume step 2 (idle)*/
- pm->pm_step = IDE_PM_RESTORE_DMA;
- break;
- }
-}
-
-static ide_startstop_t ide_start_power_step(ide_drive_t *drive, struct request *rq)
-{
- struct request_pm_state *pm = rq->data;
- ide_task_t *args = rq->special;
-
- memset(args, 0, sizeof(*args));
-
- switch (pm->pm_step) {
- case IDE_PM_FLUSH_CACHE: /* Suspend step 1 (flush cache) */
- if (drive->media != ide_disk)
- break;
- /* Not supported? Switch to next step now. */
- if (ata_id_flush_enabled(drive->id) == 0 ||
- (drive->dev_flags & IDE_DFLAG_WCACHE) == 0) {
- ide_complete_power_step(drive, rq);
- return ide_stopped;
- }
- if (ata_id_flush_ext_enabled(drive->id))
- args->tf.command = ATA_CMD_FLUSH_EXT;
- else
- args->tf.command = ATA_CMD_FLUSH;
- goto out_do_tf;
- case IDE_PM_STANDBY: /* Suspend step 2 (standby) */
- args->tf.command = ATA_CMD_STANDBYNOW1;
- goto out_do_tf;
- case IDE_PM_RESTORE_PIO: /* Resume step 1 (restore PIO) */
- ide_set_max_pio(drive);
- /*
- * skip IDE_PM_IDLE for ATAPI devices
- */
- if (drive->media != ide_disk)
- pm->pm_step = IDE_PM_RESTORE_DMA;
- else
- ide_complete_power_step(drive, rq);
- return ide_stopped;
- case IDE_PM_IDLE: /* Resume step 2 (idle) */
- args->tf.command = ATA_CMD_IDLEIMMEDIATE;
- goto out_do_tf;
- case IDE_PM_RESTORE_DMA: /* Resume step 3 (restore DMA) */
- /*
- * Right now, all we do is call ide_set_dma(drive),
- * we could be smarter and check for current xfer_speed
- * in struct drive etc...
- */
- if (drive->hwif->dma_ops == NULL)
- break;
- /*
- * TODO: respect IDE_DFLAG_USING_DMA
- */
- ide_set_dma(drive);
- break;
- }
-
- pm->pm_step = IDE_PM_COMPLETED;
- return ide_stopped;
-
-out_do_tf:
- args->tf_flags = IDE_TFLAG_TF | IDE_TFLAG_DEVICE;
- args->data_phase = TASKFILE_NO_DATA;
- return do_rw_taskfile(drive, args);
-}
-
/**
* ide_end_dequeued_request - complete an IDE I/O
* @drive: IDE device for the I/O
int ide_end_dequeued_request(ide_drive_t *drive, struct request *rq,
int uptodate, int nr_sectors)
{
- unsigned long flags;
- int ret;
-
- spin_lock_irqsave(&ide_lock, flags);
BUG_ON(!blk_rq_started(rq));
- ret = __ide_end_request(drive, rq, uptodate, nr_sectors << 9, 0);
- spin_unlock_irqrestore(&ide_lock, flags);
- return ret;
+ return __ide_end_request(drive, rq, uptodate, nr_sectors << 9, 0);
}
EXPORT_SYMBOL_GPL(ide_end_dequeued_request);
-
-/**
- * ide_complete_pm_request - end the current Power Management request
- * @drive: target drive
- * @rq: request
- *
- * This function cleans up the current PM request and stops the queue
- * if necessary.
- */
-static void ide_complete_pm_request (ide_drive_t *drive, struct request *rq)
-{
- unsigned long flags;
-
-#ifdef DEBUG_PM
- printk("%s: completing PM request, %s\n", drive->name,
- blk_pm_suspend_request(rq) ? "suspend" : "resume");
-#endif
- spin_lock_irqsave(&ide_lock, flags);
- if (blk_pm_suspend_request(rq)) {
- blk_stop_queue(drive->queue);
- } else {
- drive->dev_flags &= ~IDE_DFLAG_BLOCKED;
- blk_start_queue(drive->queue);
- }
- HWGROUP(drive)->rq = NULL;
- if (__blk_end_request(rq, 0, 0))
- BUG();
- spin_unlock_irqrestore(&ide_lock, flags);
-}
-
/**
* ide_end_drive_cmd - end an explicit drive command
* @drive: command
void ide_end_drive_cmd (ide_drive_t *drive, u8 stat, u8 err)
{
- unsigned long flags;
- struct request *rq;
-
- spin_lock_irqsave(&ide_lock, flags);
- rq = HWGROUP(drive)->rq;
- spin_unlock_irqrestore(&ide_lock, flags);
+ ide_hwgroup_t *hwgroup = drive->hwif->hwgroup;
+ struct request *rq = hwgroup->rq;
if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) {
ide_task_t *task = (ide_task_t *)rq->special;
- if (rq->errors == 0)
- rq->errors = !OK_STAT(stat, ATA_DRDY, BAD_STAT);
-
if (task) {
struct ide_taskfile *tf = &task->tf;
return;
}
- spin_lock_irqsave(&ide_lock, flags);
- HWGROUP(drive)->rq = NULL;
+ hwgroup->rq = NULL;
+
rq->errors = err;
- if (unlikely(__blk_end_request(rq, (rq->errors ? -EIO : 0),
- blk_rq_bytes(rq))))
+
+ if (unlikely(blk_end_request(rq, (rq->errors ? -EIO : 0),
+ blk_rq_bytes(rq))))
BUG();
- spin_unlock_irqrestore(&ide_lock, flags);
}
-
EXPORT_SYMBOL(ide_end_drive_cmd);
static void ide_kill_rq(ide_drive_t *drive, struct request *rq)
}
}
-static void ide_check_pm_state(ide_drive_t *drive, struct request *rq)
-{
- struct request_pm_state *pm = rq->data;
-
- if (blk_pm_suspend_request(rq) &&
- pm->pm_step == IDE_PM_START_SUSPEND)
- /* Mark drive blocked when starting the suspend sequence. */
- drive->dev_flags |= IDE_DFLAG_BLOCKED;
- else if (blk_pm_resume_request(rq) &&
- pm->pm_step == IDE_PM_START_RESUME) {
- /*
- * The first thing we do on wakeup is to wait for BSY bit to
- * go away (with a looong timeout) as a drive on this hwif may
- * just be POSTing itself.
- * We do that before even selecting as the "other" device on
- * the bus may be broken enough to walk on our toes at this
- * point.
- */
- ide_hwif_t *hwif = drive->hwif;
- int rc;
-#ifdef DEBUG_PM
- printk("%s: Wakeup request inited, waiting for !BSY...\n", drive->name);
-#endif
- rc = ide_wait_not_busy(hwif, 35000);
- if (rc)
- printk(KERN_WARNING "%s: bus not ready on wakeup\n", drive->name);
- SELECT_DRIVE(drive);
- hwif->tp_ops->set_irq(hwif, 1);
- rc = ide_wait_not_busy(hwif, 100000);
- if (rc)
- printk(KERN_WARNING "%s: drive not ready on wakeup\n", drive->name);
- }
-}
-
/**
* start_request - start of I/O and command issuing for IDE
*
/*
* Issue a new request to a drive from hwgroup
- * Caller must have already done spin_lock_irqsave(&ide_lock, ..);
+ * Caller must have already done spin_lock_irqsave(&hwgroup->lock, ..);
*
* A hwgroup is a serialized group of IDE interfaces. Usually there is
* exactly one hwif (interface) per hwgroup, but buggy controllers (eg. CMD640)
* possibly along with many other devices. This is especially common in
* PCI-based systems with off-board IDE controller cards.
*
- * The IDE driver uses the single global ide_lock spinlock to protect
+ * The IDE driver uses a per-hwgroup spinlock to protect
* access to the request queues, and to protect the hwgroup->busy flag.
*
* The first thread into the driver for a particular hwgroup sets the
* will start the next request from the queue. If no more work remains,
* the driver will clear the hwgroup->busy flag and exit.
*
- * The ide_lock (spinlock) is used to protect all access to the
+ * The per-hwgroup spinlock is used to protect all access to the
* hwgroup->busy flag, but is otherwise not needed for most processing in
* the driver. This makes the driver much more friendlier to shared IRQs
* than previous designs, while remaining 100% (?) SMP safe and capable.
*/
-static void ide_do_request (ide_hwgroup_t *hwgroup, int masked_irq)
+void do_ide_request(struct request_queue *q)
{
+ ide_drive_t *orig_drive = q->queuedata;
+ ide_hwgroup_t *hwgroup = orig_drive->hwif->hwgroup;
ide_drive_t *drive;
ide_hwif_t *hwif;
struct request *rq;
ide_startstop_t startstop;
- int loops = 0;
- /* caller must own ide_lock */
+ /* caller must own hwgroup->lock */
BUG_ON(!irqs_disabled());
- while (!hwgroup->busy) {
- hwgroup->busy = 1;
- /* for atari only */
- ide_get_lock(ide_intr, hwgroup);
+ while (!ide_lock_hwgroup(hwgroup)) {
drive = choose_drive(hwgroup);
if (drive == NULL) {
int sleeping = 0;
hwgroup->sleeping = 1;
hwgroup->req_gen_timer = hwgroup->req_gen;
mod_timer(&hwgroup->timer, sleep);
- /* we purposely leave hwgroup->busy==1
+ /* we purposely leave hwgroup locked
* while sleeping */
- } else {
- /* Ugly, but how can we sleep for the lock
- * otherwise? perhaps from tq_disk?
- */
-
- /* for atari only */
- ide_release_lock();
- hwgroup->busy = 0;
- }
+ } else
+ ide_unlock_hwgroup(hwgroup);
/* no more work for this hwgroup (for now) */
- return;
+ goto plug_device;
}
- again:
- hwif = HWIF(drive);
- if (hwgroup->hwif->sharing_irq && hwif != hwgroup->hwif) {
+
+ if (drive != orig_drive)
+ goto plug_device;
+
+ hwif = drive->hwif;
+
+ if (hwif != hwgroup->hwif) {
/*
* set nIEN for previous hwif, drives in the
* quirk_list may not like intr setups/cleanups
*/
- if (drive->quirk_list != 1)
+ if (drive->quirk_list == 0)
hwif->tp_ops->set_irq(hwif, 0);
}
hwgroup->hwif = hwif;
drive->dev_flags &= ~(IDE_DFLAG_SLEEPING | IDE_DFLAG_PARKED);
drive->service_start = jiffies;
- if (blk_queue_plugged(drive->queue)) {
- printk(KERN_ERR "ide: huh? queue was plugged!\n");
- break;
- }
-
/*
* we know that the queue isn't empty, but this can happen
* if the q->prep_rq_fn() decides to kill a request
*/
rq = elv_next_request(drive->queue);
if (!rq) {
- hwgroup->busy = 0;
+ ide_unlock_hwgroup(hwgroup);
break;
}
* though. I hope that doesn't happen too much, hopefully not
* unless the subdriver triggers such a thing in its own PM
* state machine.
- *
- * We count how many times we loop here to make sure we service
- * all drives in the hwgroup without looping for ever
*/
if ((drive->dev_flags & IDE_DFLAG_BLOCKED) &&
blk_pm_request(rq) == 0 &&
(rq->cmd_flags & REQ_PREEMPT) == 0) {
- drive = drive->next ? drive->next : hwgroup->drive;
- if (loops++ < 4 && !blk_queue_plugged(drive->queue))
- goto again;
- /* We clear busy, there should be no pending ATA command at this point. */
- hwgroup->busy = 0;
- break;
+ /* there should be no pending command at this point */
+ ide_unlock_hwgroup(hwgroup);
+ goto plug_device;
}
hwgroup->rq = rq;
- /*
- * Some systems have trouble with IDE IRQs arriving while
- * the driver is still setting things up. So, here we disable
- * the IRQ used by this interface while the request is being started.
- * This may look bad at first, but pretty much the same thing
- * happens anyway when any interrupt comes in, IDE or otherwise
- * -- the kernel masks the IRQ while it is being handled.
- */
- if (masked_irq != IDE_NO_IRQ && hwif->irq != masked_irq)
- disable_irq_nosync(hwif->irq);
- spin_unlock(&ide_lock);
- local_irq_enable_in_hardirq();
- /* allow other IRQs while we start this request */
+ spin_unlock_irq(&hwgroup->lock);
startstop = start_request(drive, rq);
- spin_lock_irq(&ide_lock);
- if (masked_irq != IDE_NO_IRQ && hwif->irq != masked_irq)
- enable_irq(hwif->irq);
- if (startstop == ide_stopped)
- hwgroup->busy = 0;
- }
-}
+ spin_lock_irq(&hwgroup->lock);
-/*
- * Passes the stuff to ide_do_request
- */
-void do_ide_request(struct request_queue *q)
-{
- ide_drive_t *drive = q->queuedata;
+ if (startstop == ide_stopped) {
+ ide_unlock_hwgroup(hwgroup);
+ if (!elv_queue_empty(orig_drive->queue))
+ blk_plug_device(orig_drive->queue);
+ }
+ }
+ return;
- ide_do_request(HWGROUP(drive), IDE_NO_IRQ);
+plug_device:
+ if (!elv_queue_empty(orig_drive->queue))
+ blk_plug_device(orig_drive->queue);
}
/*
unsigned long flags;
unsigned long wait = -1;
- spin_lock_irqsave(&ide_lock, flags);
+ spin_lock_irqsave(&hwgroup->lock, flags);
if (((handler = hwgroup->handler) == NULL) ||
(hwgroup->req_gen != hwgroup->req_gen_timer)) {
*/
if (hwgroup->sleeping) {
hwgroup->sleeping = 0;
- hwgroup->busy = 0;
+ ide_unlock_hwgroup(hwgroup);
}
} else {
ide_drive_t *drive = hwgroup->drive;
} else {
ide_hwif_t *hwif;
ide_startstop_t startstop = ide_stopped;
- if (!hwgroup->busy) {
- hwgroup->busy = 1; /* paranoia */
- printk(KERN_ERR "%s: ide_timer_expiry: hwgroup->busy was 0 ??\n", drive->name);
- }
+
if ((expiry = hwgroup->expiry) != NULL) {
/* continue */
if ((wait = expiry(drive)) > 0) {
hwgroup->timer.expires = jiffies + wait;
hwgroup->req_gen_timer = hwgroup->req_gen;
add_timer(&hwgroup->timer);
- spin_unlock_irqrestore(&ide_lock, flags);
+ spin_unlock_irqrestore(&hwgroup->lock, flags);
return;
}
}
* the handler() function, which means we need to
* globally mask the specific IRQ:
*/
- spin_unlock(&ide_lock);
+ spin_unlock(&hwgroup->lock);
hwif = HWIF(drive);
/* disable_irq_nosync ?? */
disable_irq(hwif->irq);
hwif->tp_ops->read_status(hwif));
}
drive->service_time = jiffies - drive->service_start;
- spin_lock_irq(&ide_lock);
+ spin_lock_irq(&hwgroup->lock);
enable_irq(hwif->irq);
- if (startstop == ide_stopped)
- hwgroup->busy = 0;
+ if (startstop == ide_stopped) {
+ ide_unlock_hwgroup(hwgroup);
+ if (!elv_queue_empty(drive->queue))
+ blk_plug_device(drive->queue);
+ }
}
}
- ide_do_request(hwgroup, IDE_NO_IRQ);
- spin_unlock_irqrestore(&ide_lock, flags);
+ spin_unlock_irqrestore(&hwgroup->lock, flags);
}
/**
{
unsigned long flags;
ide_hwgroup_t *hwgroup = (ide_hwgroup_t *)dev_id;
- ide_hwif_t *hwif;
+ ide_hwif_t *hwif = hwgroup->hwif;
ide_drive_t *drive;
ide_handler_t *handler;
ide_startstop_t startstop;
+ irqreturn_t irq_ret = IRQ_NONE;
- spin_lock_irqsave(&ide_lock, flags);
- hwif = hwgroup->hwif;
+ spin_lock_irqsave(&hwgroup->lock, flags);
- if (!ide_ack_intr(hwif)) {
- spin_unlock_irqrestore(&ide_lock, flags);
- return IRQ_NONE;
- }
+ if (!ide_ack_intr(hwif))
+ goto out;
if ((handler = hwgroup->handler) == NULL || hwgroup->polling) {
/*
(void)hwif->tp_ops->read_status(hwif);
#endif /* CONFIG_BLK_DEV_IDEPCI */
}
- spin_unlock_irqrestore(&ide_lock, flags);
- return IRQ_NONE;
+ goto out;
}
+
drive = hwgroup->drive;
if (!drive) {
/*
*
* [Note - this can occur if the drive is hot unplugged]
*/
- spin_unlock_irqrestore(&ide_lock, flags);
- return IRQ_HANDLED;
+ goto out_handled;
}
- if (!drive_is_ready(drive)) {
+
+ if (!drive_is_ready(drive))
/*
* This happens regularly when we share a PCI IRQ with
* another device. Unfortunately, it can also happen
* their status register is up to date. Hopefully we have
* enough advance overhead that the latter isn't a problem.
*/
- spin_unlock_irqrestore(&ide_lock, flags);
- return IRQ_NONE;
- }
- if (!hwgroup->busy) {
- hwgroup->busy = 1; /* paranoia */
- printk(KERN_ERR "%s: ide_intr: hwgroup->busy was 0 ??\n", drive->name);
- }
+ goto out;
+
hwgroup->handler = NULL;
hwgroup->req_gen++;
del_timer(&hwgroup->timer);
- spin_unlock(&ide_lock);
+ spin_unlock(&hwgroup->lock);
if (hwif->port_ops && hwif->port_ops->clear_irq)
hwif->port_ops->clear_irq(drive);
/* service this interrupt, may set handler for next interrupt */
startstop = handler(drive);
- spin_lock_irq(&ide_lock);
+ spin_lock_irq(&hwgroup->lock);
/*
* Note that handler() may have set things up for another
* interrupt to occur soon, but it cannot happen until
drive->service_time = jiffies - drive->service_start;
if (startstop == ide_stopped) {
if (hwgroup->handler == NULL) { /* paranoia */
- hwgroup->busy = 0;
- ide_do_request(hwgroup, hwif->irq);
- } else {
- printk(KERN_ERR "%s: ide_intr: huh? expected NULL handler "
- "on exit\n", drive->name);
- }
+ ide_unlock_hwgroup(hwgroup);
+ if (!elv_queue_empty(drive->queue))
+ blk_plug_device(drive->queue);
+ } else
+ printk(KERN_ERR "%s: %s: huh? expected NULL handler "
+ "on exit\n", __func__, drive->name);
}
- spin_unlock_irqrestore(&ide_lock, flags);
- return IRQ_HANDLED;
+out_handled:
+ irq_ret = IRQ_HANDLED;
+out:
+ spin_unlock_irqrestore(&hwgroup->lock, flags);
+ return irq_ret;
}
/**
void ide_do_drive_cmd(ide_drive_t *drive, struct request *rq)
{
+ ide_hwgroup_t *hwgroup = drive->hwif->hwgroup;
+ struct request_queue *q = drive->queue;
unsigned long flags;
- ide_hwgroup_t *hwgroup = HWGROUP(drive);
- spin_lock_irqsave(&ide_lock, flags);
hwgroup->rq = NULL;
- __elv_add_request(drive->queue, rq, ELEVATOR_INSERT_FRONT, 0);
- blk_start_queueing(drive->queue);
- spin_unlock_irqrestore(&ide_lock, flags);
-}
+ spin_lock_irqsave(q->queue_lock, flags);
+ __elv_add_request(q, rq, ELEVATOR_INSERT_FRONT, 0);
+ blk_start_queueing(q);
+ spin_unlock_irqrestore(q->queue_lock, flags);
+}
EXPORT_SYMBOL(ide_do_drive_cmd);
void ide_pktcmd_tf_load(ide_drive_t *drive, u32 tf_flags, u16 bcount, u8 dma)
projects / linux-2.6-block.git / blobdiff