hwmon: (pmbus) Move PMBus drivers to drivers/hwmon/pmbus

[linux-2.6-block.git] / drivers / hwmon / Kconfig

diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
index 16db83c83c8b9ecea02a19f1e0b0e80971053b1c..8924820f09667e5eaa143917a3a7204d3336b3b9 100644 (file)
--- a/drivers/hwmon/Kconfig
+++ b/drivers/hwmon/Kconfig
@@ -333,7 +333,7 @@ config SENSORS_F71882FG
            F71858FG
            F71862FG
            F71863FG
-           F71869F/E
+           F71869F/E/A
            F71882FG
            F71883FG
            F71889FG/ED/A
@@ -623,7 +623,7 @@ config SENSORS_LM90
          LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A,
          Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659,
          MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008,
-         and Winbond/Nuvoton W83L771W/G/AWG/ASG sensor chips.
+         Winbond/Nuvoton W83L771W/G/AWG/ASG and Philips SA56004 sensor chips.
 
          This driver can also be built as a module.  If so, the module
          will be called lm90.
@@ -694,14 +694,24 @@ config SENSORS_LTC4261
          be called ltc4261.
 
 config SENSORS_LM95241
-       tristate "National Semiconductor LM95241 sensor chip"
+       tristate "National Semiconductor LM95241 and compatibles"
        depends on I2C
        help
-         If you say yes here you get support for LM95241 sensor chip.
+         If you say yes here you get support for LM95231 and LM95241 sensor
+         chips.
 
          This driver can also be built as a module.  If so, the module
          will be called lm95241.
 
+config SENSORS_LM95245
+       tristate "National Semiconductor LM95245 sensor chip"
+       depends on I2C && EXPERIMENTAL
+       help
+         If you say yes here you get support for LM95245 sensor chip.
+
+         This driver can also be built as a module.  If so, the module
+         will be called lm95245.
+
 config SENSORS_MAX1111
        tristate "Maxim MAX1111 Multichannel, Serial 8-bit ADC chip"
        depends on SPI_MASTER
@@ -736,6 +746,16 @@ config SENSORS_MAX1619
          This driver can also be built as a module.  If so, the module
          will be called max1619.
 
+config SENSORS_MAX1668
+       tristate "Maxim MAX1668 and compatibles"
+       depends on I2C && EXPERIMENTAL
+       help
+         If you say yes here you get support for MAX1668, MAX1989 and
+         MAX1805 chips.
+
+         This driver can also be built as a module.  If so, the module
+         will be called max1668.
+
 config SENSORS_MAX6639
        tristate "Maxim MAX6639 sensor chip"
        depends on I2C && EXPERIMENTAL
@@ -767,6 +787,20 @@ config SENSORS_MAX6650
          This driver can also be built as a module.  If so, the module
          will be called max6650.
 
+config SENSORS_NTC_THERMISTOR
+       tristate "NTC thermistor support"
+       depends on EXPERIMENTAL
+       help
+         This driver supports NTC thermistors sensor reading and its
+         interpretation. The driver can also monitor the temperature and
+         send notifications about the temperature.
+
+         Currently, this driver supports
+         NCP15WB473, NCP18WB473, NCP21WB473, NCP03WB473, and NCP15WL333.
+
+         This driver can also be built as a module.  If so, the module
+         will be called ntc-thermistor.
+
 config SENSORS_PC87360
        tristate "National Semiconductor PC87360 family"
        select HWMON_VID
@@ -807,92 +841,7 @@ config SENSORS_PCF8591
          These devices are hard to detect and rarely found on mainstream
          hardware.  If unsure, say N.
 
-config PMBUS
-       tristate "PMBus support"
-       depends on I2C && EXPERIMENTAL
-       default n
-       help
-         Say yes here if you want to enable PMBus support.
-
-         This driver can also be built as a module. If so, the module will
-         be called pmbus_core.
-
-if PMBUS
-
-config SENSORS_PMBUS
-       tristate "Generic PMBus devices"
-       default n
-       help
-         If you say yes here you get hardware monitoring support for generic
-         PMBus devices, including but not limited to BMR450, BMR451, BMR453,
-         BMR454, and LTC2978.
-
-         This driver can also be built as a module. If so, the module will
-         be called pmbus.
-
-config SENSORS_ADM1275
-       tristate "Analog Devices ADM1275"
-       default n
-       help
-         If you say yes here you get hardware monitoring support for Analog
-         Devices ADM1275 Hot-Swap Controller and Digital Power Monitor.
-
-         This driver can also be built as a module. If so, the module will
-         be called adm1275.
-
-config SENSORS_MAX16064
-       tristate "Maxim MAX16064"
-       default n
-       help
-         If you say yes here you get hardware monitoring support for Maxim
-         MAX16064.
-
-         This driver can also be built as a module. If so, the module will
-         be called max16064.
-
-config SENSORS_MAX34440
-       tristate "Maxim MAX34440/MAX34441"
-       default n
-       help
-         If you say yes here you get hardware monitoring support for Maxim
-         MAX34440 and MAX34441.
-
-         This driver can also be built as a module. If so, the module will
-         be called max34440.
-
-config SENSORS_MAX8688
-       tristate "Maxim MAX8688"
-       default n
-       help
-         If you say yes here you get hardware monitoring support for Maxim
-         MAX8688.
-
-         This driver can also be built as a module. If so, the module will
-         be called max8688.
-
-config SENSORS_UCD9000
-       tristate "TI UCD90120, UCD90124, UCD9090, UCD90910"
-       default n
-       help
-         If you say yes here you get hardware monitoring support for TI
-         UCD90120, UCD90124, UCD9090, UCD90910 Sequencer and System Health
-         Controllers.
-
-         This driver can also be built as a module. If so, the module will
-         be called ucd9000.
-
-config SENSORS_UCD9200
-       tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
-       default n
-       help
-         If you say yes here you get hardware monitoring support for TI
-         UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
-         Digital PWM System Controllers.
-
-         This driver can also be built as a module. If so, the module will
-         be called ucd9200.
-
-endif # PMBUS
+source drivers/hwmon/pmbus/Kconfig
 
 config SENSORS_SHT15
        tristate "Sensiron humidity and temperature sensors. SHT15 and compat."