2 * QLogic Fibre Channel HBA Driver
3 * Copyright (c) 2003-2014 QLogic Corporation
5 * See LICENSE.qla2xxx for copyright and licensing details.
10 #include <linux/kernel.h>
11 #include <linux/init.h>
12 #include <linux/types.h>
13 #include <linux/module.h>
14 #include <linux/list.h>
15 #include <linux/pci.h>
16 #include <linux/dma-mapping.h>
17 #include <linux/sched.h>
18 #include <linux/slab.h>
19 #include <linux/dmapool.h>
20 #include <linux/mempool.h>
21 #include <linux/spinlock.h>
22 #include <linux/completion.h>
23 #include <linux/interrupt.h>
24 #include <linux/workqueue.h>
25 #include <linux/firmware.h>
26 #include <linux/aer.h>
27 #include <linux/mutex.h>
28 #include <linux/btree.h>
30 #include <scsi/scsi.h>
31 #include <scsi/scsi_host.h>
32 #include <scsi/scsi_device.h>
33 #include <scsi/scsi_cmnd.h>
34 #include <scsi/scsi_transport_fc.h>
35 #include <scsi/scsi_bsg_fc.h>
42 #define QLA2XXX_DRIVER_NAME "qla2xxx"
43 #define QLA2XXX_APIDEV "ql2xapidev"
44 #define QLA2XXX_MANUFACTURER "QLogic Corporation"
47 * We have MAILBOX_REGISTER_COUNT sized arrays in a few places,
48 * but that's fine as we don't look at the last 24 ones for
51 #define MAILBOX_REGISTER_COUNT_2100 8
52 #define MAILBOX_REGISTER_COUNT_2200 24
53 #define MAILBOX_REGISTER_COUNT 32
55 #define QLA2200A_RISC_ROM_VER 4
59 #include "qla_settings.h"
61 #define MODE_DUAL (MODE_TARGET | MODE_INITIATOR)
64 * Data bit definitions
82 #define BIT_16 0x10000
83 #define BIT_17 0x20000
84 #define BIT_18 0x40000
85 #define BIT_19 0x80000
86 #define BIT_20 0x100000
87 #define BIT_21 0x200000
88 #define BIT_22 0x400000
89 #define BIT_23 0x800000
90 #define BIT_24 0x1000000
91 #define BIT_25 0x2000000
92 #define BIT_26 0x4000000
93 #define BIT_27 0x8000000
94 #define BIT_28 0x10000000
95 #define BIT_29 0x20000000
96 #define BIT_30 0x40000000
97 #define BIT_31 0x80000000
99 #define LSB(x) ((uint8_t)(x))
100 #define MSB(x) ((uint8_t)((uint16_t)(x) >> 8))
102 #define LSW(x) ((uint16_t)(x))
103 #define MSW(x) ((uint16_t)((uint32_t)(x) >> 16))
105 #define LSD(x) ((uint32_t)((uint64_t)(x)))
106 #define MSD(x) ((uint32_t)((((uint64_t)(x)) >> 16) >> 16))
108 #define MAKE_HANDLE(x, y) ((uint32_t)((((uint32_t)(x)) << 16) | (uint32_t)(y)))
114 #define RD_REG_BYTE(addr) readb(addr)
115 #define RD_REG_WORD(addr) readw(addr)
116 #define RD_REG_DWORD(addr) readl(addr)
117 #define RD_REG_BYTE_RELAXED(addr) readb_relaxed(addr)
118 #define RD_REG_WORD_RELAXED(addr) readw_relaxed(addr)
119 #define RD_REG_DWORD_RELAXED(addr) readl_relaxed(addr)
120 #define WRT_REG_BYTE(addr, data) writeb(data,addr)
121 #define WRT_REG_WORD(addr, data) writew(data,addr)
122 #define WRT_REG_DWORD(addr, data) writel(data,addr)
125 * ISP83XX specific remote register addresses
127 #define QLA83XX_LED_PORT0 0x00201320
128 #define QLA83XX_LED_PORT1 0x00201328
129 #define QLA83XX_IDC_DEV_STATE 0x22102384
130 #define QLA83XX_IDC_MAJOR_VERSION 0x22102380
131 #define QLA83XX_IDC_MINOR_VERSION 0x22102398
132 #define QLA83XX_IDC_DRV_PRESENCE 0x22102388
133 #define QLA83XX_IDC_DRIVER_ACK 0x2210238c
134 #define QLA83XX_IDC_CONTROL 0x22102390
135 #define QLA83XX_IDC_AUDIT 0x22102394
136 #define QLA83XX_IDC_LOCK_RECOVERY 0x2210239c
137 #define QLA83XX_DRIVER_LOCKID 0x22102104
138 #define QLA83XX_DRIVER_LOCK 0x8111c028
139 #define QLA83XX_DRIVER_UNLOCK 0x8111c02c
140 #define QLA83XX_FLASH_LOCKID 0x22102100
141 #define QLA83XX_FLASH_LOCK 0x8111c010
142 #define QLA83XX_FLASH_UNLOCK 0x8111c014
143 #define QLA83XX_DEV_PARTINFO1 0x221023e0
144 #define QLA83XX_DEV_PARTINFO2 0x221023e4
145 #define QLA83XX_FW_HEARTBEAT 0x221020b0
146 #define QLA83XX_PEG_HALT_STATUS1 0x221020a8
147 #define QLA83XX_PEG_HALT_STATUS2 0x221020ac
149 /* 83XX: Macros defining 8200 AEN Reason codes */
150 #define IDC_DEVICE_STATE_CHANGE BIT_0
151 #define IDC_PEG_HALT_STATUS_CHANGE BIT_1
152 #define IDC_NIC_FW_REPORTED_FAILURE BIT_2
153 #define IDC_HEARTBEAT_FAILURE BIT_3
155 /* 83XX: Macros defining 8200 AEN Error-levels */
156 #define ERR_LEVEL_NON_FATAL 0x1
157 #define ERR_LEVEL_RECOVERABLE_FATAL 0x2
158 #define ERR_LEVEL_UNRECOVERABLE_FATAL 0x4
160 /* 83XX: Macros for IDC Version */
161 #define QLA83XX_SUPP_IDC_MAJOR_VERSION 0x01
162 #define QLA83XX_SUPP_IDC_MINOR_VERSION 0x0
164 /* 83XX: Macros for scheduling dpc tasks */
165 #define QLA83XX_NIC_CORE_RESET 0x1
166 #define QLA83XX_IDC_STATE_HANDLER 0x2
167 #define QLA83XX_NIC_CORE_UNRECOVERABLE 0x3
169 /* 83XX: Macros for defining IDC-Control bits */
170 #define QLA83XX_IDC_RESET_DISABLED BIT_0
171 #define QLA83XX_IDC_GRACEFUL_RESET BIT_1
173 /* 83XX: Macros for different timeouts */
174 #define QLA83XX_IDC_INITIALIZATION_TIMEOUT 30
175 #define QLA83XX_IDC_RESET_ACK_TIMEOUT 10
176 #define QLA83XX_MAX_LOCK_RECOVERY_WAIT (2 * HZ)
178 /* 83XX: Macros for defining class in DEV-Partition Info register */
179 #define QLA83XX_CLASS_TYPE_NONE 0x0
180 #define QLA83XX_CLASS_TYPE_NIC 0x1
181 #define QLA83XX_CLASS_TYPE_FCOE 0x2
182 #define QLA83XX_CLASS_TYPE_ISCSI 0x3
184 /* 83XX: Macros for IDC Lock-Recovery stages */
185 #define IDC_LOCK_RECOVERY_STAGE1 0x1 /* Stage1: Intent for
188 #define IDC_LOCK_RECOVERY_STAGE2 0x2 /* Stage2: Perform lock-recovery */
190 /* 83XX: Macros for IDC Audit type */
191 #define IDC_AUDIT_TIMESTAMP 0x0 /* IDC-AUDIT: Record timestamp of
192 * dev-state change to NEED-RESET
195 #define IDC_AUDIT_COMPLETION 0x1 /* IDC-AUDIT: Record duration of
196 * reset-recovery completion is
199 /* ISP2031: Values for laser on/off */
200 #define PORT_0_2031 0x00201340
201 #define PORT_1_2031 0x00201350
202 #define LASER_ON_2031 0x01800100
203 #define LASER_OFF_2031 0x01800180
206 * The ISP2312 v2 chip cannot access the FLASH/GPIO registers via MMIO in an
209 #define RD_REG_WORD_PIO(addr) (inw((unsigned long)addr))
210 #define WRT_REG_WORD_PIO(addr, data) (outw(data,(unsigned long)addr))
213 * Fibre Channel device definitions.
215 #define WWN_SIZE 8 /* Size of WWPN, WWN & WWNN */
216 #define MAX_FIBRE_DEVICES_2100 512
217 #define MAX_FIBRE_DEVICES_2400 2048
218 #define MAX_FIBRE_DEVICES_LOOP 128
219 #define MAX_FIBRE_DEVICES_MAX MAX_FIBRE_DEVICES_2400
220 #define LOOPID_MAP_SIZE (ha->max_fibre_devices)
221 #define MAX_FIBRE_LUNS 0xFFFF
222 #define MAX_HOST_COUNT 16
225 * Host adapter default definitions.
227 #define MAX_BUSES 1 /* We only have one bus today */
229 #define MAX_LUNS MAX_FIBRE_LUNS
230 #define MAX_CMDS_PER_LUN 255
233 * Fibre Channel device definitions.
235 #define SNS_LAST_LOOP_ID_2100 0xfe
236 #define SNS_LAST_LOOP_ID_2300 0x7ff
238 #define LAST_LOCAL_LOOP_ID 0x7d
239 #define SNS_FL_PORT 0x7e
240 #define FABRIC_CONTROLLER 0x7f
241 #define SIMPLE_NAME_SERVER 0x80
242 #define SNS_FIRST_LOOP_ID 0x81
243 #define MANAGEMENT_SERVER 0xfe
244 #define BROADCAST 0xff
247 * There is no correspondence between an N-PORT id and an AL_PA. Therefore the
248 * valid range of an N-PORT id is 0 through 0x7ef.
250 #define NPH_LAST_HANDLE 0x7ee
251 #define NPH_MGMT_SERVER 0x7ef /* FFFFEF */
252 #define NPH_SNS 0x7fc /* FFFFFC */
253 #define NPH_FABRIC_CONTROLLER 0x7fd /* FFFFFD */
254 #define NPH_F_PORT 0x7fe /* FFFFFE */
255 #define NPH_IP_BROADCAST 0x7ff /* FFFFFF */
257 #define NPH_SNS_LID(ha) (IS_FWI2_CAPABLE(ha) ? NPH_SNS : SIMPLE_NAME_SERVER)
259 #define MAX_CMDSZ 16 /* SCSI maximum CDB size. */
262 struct name_list_extended {
263 struct get_name_list_extended *l;
265 struct list_head fcports;
270 * Timeout timer counts in seconds
272 #define PORT_RETRY_TIME 1
273 #define LOOP_DOWN_TIMEOUT 60
274 #define LOOP_DOWN_TIME 255 /* 240 */
275 #define LOOP_DOWN_RESET (LOOP_DOWN_TIME - 30)
277 #define DEFAULT_OUTSTANDING_COMMANDS 4096
278 #define MIN_OUTSTANDING_COMMANDS 128
280 /* ISP request and response entry counts (37-65535) */
281 #define REQUEST_ENTRY_CNT_2100 128 /* Number of request entries. */
282 #define REQUEST_ENTRY_CNT_2200 2048 /* Number of request entries. */
283 #define REQUEST_ENTRY_CNT_24XX 2048 /* Number of request entries. */
284 #define REQUEST_ENTRY_CNT_83XX 8192 /* Number of request entries. */
285 #define RESPONSE_ENTRY_CNT_83XX 4096 /* Number of response entries.*/
286 #define RESPONSE_ENTRY_CNT_2100 64 /* Number of response entries.*/
287 #define RESPONSE_ENTRY_CNT_2300 512 /* Number of response entries.*/
288 #define RESPONSE_ENTRY_CNT_MQ 128 /* Number of response entries.*/
289 #define ATIO_ENTRY_CNT_24XX 4096 /* Number of ATIO entries. */
290 #define RESPONSE_ENTRY_CNT_FX00 256 /* Number of response entries.*/
291 #define FW_DEF_EXCHANGES_CNT 2048
292 #define FW_MAX_EXCHANGES_CNT (32 * 1024)
293 #define REDUCE_EXCHANGES_CNT (8 * 1024)
302 struct scsi_cmnd *cmd; /* Linux SCSI command pkt */
303 uint32_t request_sense_length;
304 uint32_t fw_sense_length;
305 uint8_t *request_sense_ptr;
310 * SRB flag definitions
312 #define SRB_DMA_VALID BIT_0 /* Command sent to ISP */
313 #define SRB_FCP_CMND_DMA_VALID BIT_12 /* DIF: DSD List valid */
314 #define SRB_CRC_CTX_DMA_VALID BIT_2 /* DIF: context DMA valid */
315 #define SRB_CRC_PROT_DMA_VALID BIT_4 /* DIF: prot DMA valid */
316 #define SRB_CRC_CTX_DSD_VALID BIT_5 /* DIF: dsd_list valid */
317 #define SRB_WAKEUP_ON_COMP BIT_6
318 #define SRB_DIF_BUNDL_DMA_VALID BIT_7 /* DIF: DMA list valid */
320 /* To identify if a srb is of T10-CRC type. @sp => srb_t pointer */
321 #define IS_PROT_IO(sp) (sp->flags & SRB_CRC_CTX_DSD_VALID)
324 * 24 bit port ID type definition.
334 #elif defined(__LITTLE_ENDIAN)
339 #error "__BIG_ENDIAN or __LITTLE_ENDIAN must be defined!"
344 #define INVALID_PORT_ID 0xFFFFFF
346 struct els_logo_payload {
351 uint8_t wwpn[WWN_SIZE];
354 struct els_plogi_payload {
367 u32 req_allocated_size;
368 u32 rsp_allocated_size;
381 #define SRB_LOGIN_RETRIED BIT_0
382 #define SRB_LOGIN_COND_PLOGI BIT_1
383 #define SRB_LOGIN_SKIP_PRLI BIT_2
384 #define SRB_LOGIN_NVME_PRLI BIT_3
385 #define SRB_LOGIN_PRLI_ONLY BIT_4
390 #define ELS_DCMD_TIMEOUT 20
391 #define ELS_DCMD_LOGO 0x5
394 struct completion comp;
395 struct els_logo_payload *els_logo_pyld;
396 dma_addr_t els_logo_pyld_dma;
399 #define ELS_DCMD_PLOGI 0x3
402 struct completion comp;
403 struct els_plogi_payload *els_plogi_pyld;
404 struct els_plogi_payload *els_resp_pyld;
407 dma_addr_t els_plogi_pyld_dma;
408 dma_addr_t els_resp_pyld_dma;
409 uint32_t fw_status[3];
415 * Values for flags field below are as
416 * defined in tsk_mgmt_entry struct
417 * for control_flags field in qla_fw.h.
422 struct completion comp;
426 #define SRB_FXDISC_REQ_DMA_VALID BIT_0
427 #define SRB_FXDISC_RESP_DMA_VALID BIT_1
428 #define SRB_FXDISC_REQ_DWRD_VALID BIT_2
429 #define SRB_FXDISC_RSP_DWRD_VALID BIT_3
430 #define FXDISC_TIMEOUT 20
436 dma_addr_t req_dma_handle;
437 dma_addr_t rsp_dma_handle;
439 __le32 adapter_id_hi;
440 __le16 req_func_type;
442 __le32 req_data_extra;
446 struct completion fxiocb_comp;
454 struct completion comp;
457 #define MAX_IOCB_MB_REG 28
458 #define SIZEOF_IOCB_MB_REG (MAX_IOCB_MB_REG * sizeof(uint16_t))
460 __le16 in_mb[MAX_IOCB_MB_REG]; /* from FW */
461 __le16 out_mb[MAX_IOCB_MB_REG]; /* to FW */
463 dma_addr_t out_dma, in_dma;
464 struct completion comp;
468 struct imm_ntfy_from_isp *ntfy;
472 uint16_t rsp_pyld_len;
476 /* These are only used with ls4 requests */
481 enum nvmefc_fcp_datadir dir;
483 uint32_t timeout_sec;
484 struct list_head entry;
492 struct timer_list timer;
493 void (*timeout)(void *);
496 /* Values for srb_ctx type */
497 #define SRB_LOGIN_CMD 1
498 #define SRB_LOGOUT_CMD 2
499 #define SRB_ELS_CMD_RPT 3
500 #define SRB_ELS_CMD_HST 4
502 #define SRB_ADISC_CMD 6
504 #define SRB_SCSI_CMD 8
505 #define SRB_BIDI_CMD 9
506 #define SRB_FXIOCB_DCMD 10
507 #define SRB_FXIOCB_BCMD 11
508 #define SRB_ABT_CMD 12
509 #define SRB_ELS_DCMD 13
510 #define SRB_MB_IOCB 14
511 #define SRB_CT_PTHRU_CMD 15
512 #define SRB_NACK_PLOGI 16
513 #define SRB_NACK_PRLI 17
514 #define SRB_NACK_LOGO 18
515 #define SRB_NVME_CMD 19
516 #define SRB_NVME_LS 20
517 #define SRB_PRLI_CMD 21
518 #define SRB_CTRL_VP 22
519 #define SRB_PRLO_CMD 23
524 TYPE_TGT_TMCMD, /* task management */
529 * Do not move cmd_type field, it needs to
530 * line up with qla_tgt_cmd->cmd_type
535 struct kref cmd_kref; /* need to migrate ref_count over to this */
537 wait_queue_head_t nvme_ls_waitq;
538 struct fc_port *fcport;
539 struct scsi_qla_host *vha;
545 struct qla_qpair *qpair;
546 struct list_head elem;
547 u32 gen1; /* scratch */
548 u32 gen2; /* scratch */
551 struct completion *comp;
553 struct srb_iocb iocb_cmd;
554 struct bsg_job *bsg_job;
557 void (*done)(void *, int);
558 void (*free)(void *);
559 void (*put_fn)(struct kref *kref);
562 #define GET_CMD_SP(sp) (sp->u.scmd.cmd)
563 #define SET_CMD_SP(sp, cmd) (sp->u.scmd.cmd = cmd)
564 #define GET_CMD_CTX_SP(sp) (sp->u.scmd.ctx)
566 #define GET_CMD_SENSE_LEN(sp) \
567 (sp->u.scmd.request_sense_length)
568 #define SET_CMD_SENSE_LEN(sp, len) \
569 (sp->u.scmd.request_sense_length = len)
570 #define GET_CMD_SENSE_PTR(sp) \
571 (sp->u.scmd.request_sense_ptr)
572 #define SET_CMD_SENSE_PTR(sp, ptr) \
573 (sp->u.scmd.request_sense_ptr = ptr)
574 #define GET_FW_SENSE_LEN(sp) \
575 (sp->u.scmd.fw_sense_length)
576 #define SET_FW_SENSE_LEN(sp, len) \
577 (sp->u.scmd.fw_sense_length = len)
585 uint32_t transfer_size;
586 uint32_t iteration_count;
590 * ISP I/O Register Set structure definitions.
592 struct device_reg_2xxx {
593 uint16_t flash_address; /* Flash BIOS address */
594 uint16_t flash_data; /* Flash BIOS data */
595 uint16_t unused_1[1]; /* Gap */
596 uint16_t ctrl_status; /* Control/Status */
597 #define CSR_FLASH_64K_BANK BIT_3 /* Flash upper 64K bank select */
598 #define CSR_FLASH_ENABLE BIT_1 /* Flash BIOS Read/Write enable */
599 #define CSR_ISP_SOFT_RESET BIT_0 /* ISP soft reset */
601 uint16_t ictrl; /* Interrupt control */
602 #define ICR_EN_INT BIT_15 /* ISP enable interrupts. */
603 #define ICR_EN_RISC BIT_3 /* ISP enable RISC interrupts. */
605 uint16_t istatus; /* Interrupt status */
606 #define ISR_RISC_INT BIT_3 /* RISC interrupt */
608 uint16_t semaphore; /* Semaphore */
609 uint16_t nvram; /* NVRAM register. */
610 #define NVR_DESELECT 0
611 #define NVR_BUSY BIT_15
612 #define NVR_WRT_ENABLE BIT_14 /* Write enable */
613 #define NVR_PR_ENABLE BIT_13 /* Protection register enable */
614 #define NVR_DATA_IN BIT_3
615 #define NVR_DATA_OUT BIT_2
616 #define NVR_SELECT BIT_1
617 #define NVR_CLOCK BIT_0
619 #define NVR_WAIT_CNT 20000
631 uint16_t unused_2[59]; /* Gap */
632 } __attribute__((packed)) isp2100;
635 uint16_t req_q_in; /* In-Pointer */
636 uint16_t req_q_out; /* Out-Pointer */
638 uint16_t rsp_q_in; /* In-Pointer */
639 uint16_t rsp_q_out; /* Out-Pointer */
641 /* RISC to Host Status */
642 uint32_t host_status;
643 #define HSR_RISC_INT BIT_15 /* RISC interrupt */
644 #define HSR_RISC_PAUSED BIT_8 /* RISC Paused */
646 /* Host to Host Semaphore */
647 uint16_t host_semaphore;
648 uint16_t unused_3[17]; /* Gap */
682 uint16_t unused_4[10]; /* Gap */
683 } __attribute__((packed)) isp2300;
686 uint16_t fpm_diag_config;
687 uint16_t unused_5[0x4]; /* Gap */
689 uint16_t unused_5_1; /* Gap */
690 uint16_t pcr; /* Processor Control Register. */
691 uint16_t unused_6[0x5]; /* Gap */
692 uint16_t mctr; /* Memory Configuration and Timing. */
693 uint16_t unused_7[0x3]; /* Gap */
694 uint16_t fb_cmd_2100; /* Unused on 23XX */
695 uint16_t unused_8[0x3]; /* Gap */
696 uint16_t hccr; /* Host command & control register. */
697 #define HCCR_HOST_INT BIT_7 /* Host interrupt bit */
698 #define HCCR_RISC_PAUSE BIT_5 /* Pause mode bit */
700 #define HCCR_RESET_RISC 0x1000 /* Reset RISC */
701 #define HCCR_PAUSE_RISC 0x2000 /* Pause RISC */
702 #define HCCR_RELEASE_RISC 0x3000 /* Release RISC from reset. */
703 #define HCCR_SET_HOST_INT 0x5000 /* Set host interrupt */
704 #define HCCR_CLR_HOST_INT 0x6000 /* Clear HOST interrupt */
705 #define HCCR_CLR_RISC_INT 0x7000 /* Clear RISC interrupt */
706 #define HCCR_DISABLE_PARITY_PAUSE 0x4001 /* Disable parity error RISC pause. */
707 #define HCCR_ENABLE_PARITY 0xA000 /* Enable PARITY interrupt */
709 uint16_t unused_9[5]; /* Gap */
710 uint16_t gpiod; /* GPIO Data register. */
711 uint16_t gpioe; /* GPIO Enable register. */
712 #define GPIO_LED_MASK 0x00C0
713 #define GPIO_LED_GREEN_OFF_AMBER_OFF 0x0000
714 #define GPIO_LED_GREEN_ON_AMBER_OFF 0x0040
715 #define GPIO_LED_GREEN_OFF_AMBER_ON 0x0080
716 #define GPIO_LED_GREEN_ON_AMBER_ON 0x00C0
717 #define GPIO_LED_ALL_OFF 0x0000
718 #define GPIO_LED_RED_ON_OTHER_OFF 0x0001 /* isp2322 */
719 #define GPIO_LED_RGA_ON 0x00C1 /* isp2322: red green amber */
723 uint16_t unused_10[8]; /* Gap */
739 uint16_t mailbox23; /* Also probe reg. */
740 } __attribute__((packed)) isp2200;
744 struct device_reg_25xxmq {
754 struct device_reg_fx00 {
755 uint32_t mailbox0; /* 00 */
756 uint32_t mailbox1; /* 04 */
757 uint32_t mailbox2; /* 08 */
758 uint32_t mailbox3; /* 0C */
759 uint32_t mailbox4; /* 10 */
760 uint32_t mailbox5; /* 14 */
761 uint32_t mailbox6; /* 18 */
762 uint32_t mailbox7; /* 1C */
763 uint32_t mailbox8; /* 20 */
764 uint32_t mailbox9; /* 24 */
765 uint32_t mailbox10; /* 28 */
787 uint32_t aenmailbox0;
788 uint32_t aenmailbox1;
789 uint32_t aenmailbox2;
790 uint32_t aenmailbox3;
791 uint32_t aenmailbox4;
792 uint32_t aenmailbox5;
793 uint32_t aenmailbox6;
794 uint32_t aenmailbox7;
796 uint32_t req_q_in; /* A0 - Request Queue In-Pointer */
797 uint32_t req_q_out; /* A4 - Request Queue Out-Pointer */
798 /* Response Queue. */
799 uint32_t rsp_q_in; /* A8 - Response Queue In-Pointer */
800 uint32_t rsp_q_out; /* AC - Response Queue Out-Pointer */
801 /* Init values shadowed on FW Up Event */
802 uint32_t initval0; /* B0 */
803 uint32_t initval1; /* B4 */
804 uint32_t initval2; /* B8 */
805 uint32_t initval3; /* BC */
806 uint32_t initval4; /* C0 */
807 uint32_t initval5; /* C4 */
808 uint32_t initval6; /* C8 */
809 uint32_t initval7; /* CC */
810 uint32_t fwheartbeat; /* D0 */
811 uint32_t pseudoaen; /* D4 */
817 struct device_reg_2xxx isp;
818 struct device_reg_24xx isp24;
819 struct device_reg_25xxmq isp25mq;
820 struct device_reg_82xx isp82;
821 struct device_reg_fx00 ispfx00;
822 } __iomem device_reg_t;
824 #define ISP_REQ_Q_IN(ha, reg) \
825 (IS_QLA2100(ha) || IS_QLA2200(ha) ? \
826 &(reg)->u.isp2100.mailbox4 : \
827 &(reg)->u.isp2300.req_q_in)
828 #define ISP_REQ_Q_OUT(ha, reg) \
829 (IS_QLA2100(ha) || IS_QLA2200(ha) ? \
830 &(reg)->u.isp2100.mailbox4 : \
831 &(reg)->u.isp2300.req_q_out)
832 #define ISP_RSP_Q_IN(ha, reg) \
833 (IS_QLA2100(ha) || IS_QLA2200(ha) ? \
834 &(reg)->u.isp2100.mailbox5 : \
835 &(reg)->u.isp2300.rsp_q_in)
836 #define ISP_RSP_Q_OUT(ha, reg) \
837 (IS_QLA2100(ha) || IS_QLA2200(ha) ? \
838 &(reg)->u.isp2100.mailbox5 : \
839 &(reg)->u.isp2300.rsp_q_out)
841 #define ISP_ATIO_Q_IN(vha) (vha->hw->tgt.atio_q_in)
842 #define ISP_ATIO_Q_OUT(vha) (vha->hw->tgt.atio_q_out)
844 #define MAILBOX_REG(ha, reg, num) \
845 (IS_QLA2100(ha) || IS_QLA2200(ha) ? \
847 &(reg)->u.isp2100.mailbox0 + (num) : \
848 &(reg)->u_end.isp2200.mailbox8 + (num) - 8) : \
849 &(reg)->u.isp2300.mailbox0 + (num))
850 #define RD_MAILBOX_REG(ha, reg, num) \
851 RD_REG_WORD(MAILBOX_REG(ha, reg, num))
852 #define WRT_MAILBOX_REG(ha, reg, num, data) \
853 WRT_REG_WORD(MAILBOX_REG(ha, reg, num), data)
855 #define FB_CMD_REG(ha, reg) \
856 (IS_QLA2100(ha) || IS_QLA2200(ha) ? \
857 &(reg)->fb_cmd_2100 : \
858 &(reg)->u.isp2300.fb_cmd)
859 #define RD_FB_CMD_REG(ha, reg) \
860 RD_REG_WORD(FB_CMD_REG(ha, reg))
861 #define WRT_FB_CMD_REG(ha, reg, data) \
862 WRT_REG_WORD(FB_CMD_REG(ha, reg), data)
865 uint32_t out_mb; /* outbound from driver */
866 uint32_t in_mb; /* Incoming from RISC */
867 uint16_t mb[MAILBOX_REGISTER_COUNT];
872 #define MBX_DMA_IN BIT_0
873 #define MBX_DMA_OUT BIT_1
874 #define IOCTL_CMD BIT_2
878 uint32_t out_mb; /* outbound from driver */
879 uint32_t in_mb; /* Incoming from RISC */
880 uint32_t mb[MAILBOX_REGISTER_COUNT];
885 #define MBX_DMA_IN BIT_0
886 #define MBX_DMA_OUT BIT_1
887 #define IOCTL_CMD BIT_2
891 #define MBX_TOV_SECONDS 30
894 * ISP product identification definitions in mailboxes after reset.
896 #define PROD_ID_1 0x4953
897 #define PROD_ID_2 0x0000
898 #define PROD_ID_2a 0x5020
899 #define PROD_ID_3 0x2020
902 * ISP mailbox Self-Test status codes
904 #define MBS_FRM_ALIVE 0 /* Firmware Alive. */
905 #define MBS_CHKSUM_ERR 1 /* Checksum Error. */
906 #define MBS_BUSY 4 /* Busy. */
909 * ISP mailbox command complete status codes
911 #define MBS_COMMAND_COMPLETE 0x4000
912 #define MBS_INVALID_COMMAND 0x4001
913 #define MBS_HOST_INTERFACE_ERROR 0x4002
914 #define MBS_TEST_FAILED 0x4003
915 #define MBS_COMMAND_ERROR 0x4005
916 #define MBS_COMMAND_PARAMETER_ERROR 0x4006
917 #define MBS_PORT_ID_USED 0x4007
918 #define MBS_LOOP_ID_USED 0x4008
919 #define MBS_ALL_IDS_IN_USE 0x4009
920 #define MBS_NOT_LOGGED_IN 0x400A
921 #define MBS_LINK_DOWN_ERROR 0x400B
922 #define MBS_DIAG_ECHO_TEST_ERROR 0x400C
925 * ISP mailbox asynchronous event status codes
927 #define MBA_ASYNC_EVENT 0x8000 /* Asynchronous event. */
928 #define MBA_RESET 0x8001 /* Reset Detected. */
929 #define MBA_SYSTEM_ERR 0x8002 /* System Error. */
930 #define MBA_REQ_TRANSFER_ERR 0x8003 /* Request Transfer Error. */
931 #define MBA_RSP_TRANSFER_ERR 0x8004 /* Response Transfer Error. */
932 #define MBA_WAKEUP_THRES 0x8005 /* Request Queue Wake-up. */
933 #define MBA_LIP_OCCURRED 0x8010 /* Loop Initialization Procedure */
935 #define MBA_LOOP_UP 0x8011 /* FC Loop UP. */
936 #define MBA_LOOP_DOWN 0x8012 /* FC Loop Down. */
937 #define MBA_LIP_RESET 0x8013 /* LIP reset occurred. */
938 #define MBA_PORT_UPDATE 0x8014 /* Port Database update. */
939 #define MBA_RSCN_UPDATE 0x8015 /* Register State Chg Notification. */
940 #define MBA_LIP_F8 0x8016 /* Received a LIP F8. */
941 #define MBA_LOOP_INIT_ERR 0x8017 /* Loop Initialization Error. */
942 #define MBA_FABRIC_AUTH_REQ 0x801b /* Fabric Authentication Required. */
943 #define MBA_SCSI_COMPLETION 0x8020 /* SCSI Command Complete. */
944 #define MBA_CTIO_COMPLETION 0x8021 /* CTIO Complete. */
945 #define MBA_IP_COMPLETION 0x8022 /* IP Transmit Command Complete. */
946 #define MBA_IP_RECEIVE 0x8023 /* IP Received. */
947 #define MBA_IP_BROADCAST 0x8024 /* IP Broadcast Received. */
948 #define MBA_IP_LOW_WATER_MARK 0x8025 /* IP Low Water Mark reached. */
949 #define MBA_IP_RCV_BUFFER_EMPTY 0x8026 /* IP receive buffer queue empty. */
950 #define MBA_IP_HDR_DATA_SPLIT 0x8027 /* IP header/data splitting feature */
952 #define MBA_TRACE_NOTIFICATION 0x8028 /* Trace/Diagnostic notification. */
953 #define MBA_POINT_TO_POINT 0x8030 /* Point to point mode. */
954 #define MBA_CMPLT_1_16BIT 0x8031 /* Completion 1 16bit IOSB. */
955 #define MBA_CMPLT_2_16BIT 0x8032 /* Completion 2 16bit IOSB. */
956 #define MBA_CMPLT_3_16BIT 0x8033 /* Completion 3 16bit IOSB. */
957 #define MBA_CMPLT_4_16BIT 0x8034 /* Completion 4 16bit IOSB. */
958 #define MBA_CMPLT_5_16BIT 0x8035 /* Completion 5 16bit IOSB. */
959 #define MBA_CHG_IN_CONNECTION 0x8036 /* Change in connection mode. */
960 #define MBA_RIO_RESPONSE 0x8040 /* RIO response queue update. */
961 #define MBA_ZIO_RESPONSE 0x8040 /* ZIO response queue update. */
962 #define MBA_CMPLT_2_32BIT 0x8042 /* Completion 2 32bit IOSB. */
963 #define MBA_BYPASS_NOTIFICATION 0x8043 /* Auto bypass notification. */
964 #define MBA_DISCARD_RND_FRAME 0x8048 /* discard RND frame due to error. */
965 #define MBA_REJECTED_FCP_CMD 0x8049 /* rejected FCP_CMD. */
966 #define MBA_FW_NOT_STARTED 0x8050 /* Firmware not started */
967 #define MBA_FW_STARTING 0x8051 /* Firmware starting */
968 #define MBA_FW_RESTART_CMPLT 0x8060 /* Firmware restart complete */
969 #define MBA_INIT_REQUIRED 0x8061 /* Initialization required */
970 #define MBA_SHUTDOWN_REQUESTED 0x8062 /* Shutdown Requested */
971 #define MBA_TEMPERATURE_ALERT 0x8070 /* Temperature Alert */
972 #define MBA_DPORT_DIAGNOSTICS 0x8080 /* D-port Diagnostics */
973 #define MBA_TRANS_INSERT 0x8130 /* Transceiver Insertion */
974 #define MBA_FW_INIT_FAILURE 0x8401 /* Firmware initialization failure */
975 #define MBA_MIRROR_LUN_CHANGE 0x8402 /* Mirror LUN State Change
977 #define MBA_FW_POLL_STATE 0x8600 /* Firmware in poll diagnostic state */
978 #define MBA_FW_RESET_FCT 0x8502 /* Firmware reset factory defaults */
979 #define MBA_FW_INIT_INPROGRESS 0x8500 /* Firmware boot in progress */
980 /* 83XX FCoE specific */
981 #define MBA_IDC_AEN 0x8200 /* FCoE: NIC Core state change AEN */
983 /* Interrupt type codes */
984 #define INTR_ROM_MB_SUCCESS 0x1
985 #define INTR_ROM_MB_FAILED 0x2
986 #define INTR_MB_SUCCESS 0x10
987 #define INTR_MB_FAILED 0x11
988 #define INTR_ASYNC_EVENT 0x12
989 #define INTR_RSP_QUE_UPDATE 0x13
990 #define INTR_RSP_QUE_UPDATE_83XX 0x14
991 #define INTR_ATIO_QUE_UPDATE 0x1C
992 #define INTR_ATIO_RSP_QUE_UPDATE 0x1D
993 #define INTR_ATIO_QUE_UPDATE_27XX 0x1E
995 /* ISP mailbox loopback echo diagnostic error code */
996 #define MBS_LB_RESET 0x17
998 * Firmware options 1, 2, 3.
1000 #define FO1_AE_ON_LIPF8 BIT_0
1001 #define FO1_AE_ALL_LIP_RESET BIT_1
1002 #define FO1_CTIO_RETRY BIT_3
1003 #define FO1_DISABLE_LIP_F7_SW BIT_4
1004 #define FO1_DISABLE_100MS_LOS_WAIT BIT_5
1005 #define FO1_DISABLE_GPIO6_7 BIT_6 /* LED bits */
1006 #define FO1_AE_ON_LOOP_INIT_ERR BIT_7
1007 #define FO1_SET_EMPHASIS_SWING BIT_8
1008 #define FO1_AE_AUTO_BYPASS BIT_9
1009 #define FO1_ENABLE_PURE_IOCB BIT_10
1010 #define FO1_AE_PLOGI_RJT BIT_11
1011 #define FO1_ENABLE_ABORT_SEQUENCE BIT_12
1012 #define FO1_AE_QUEUE_FULL BIT_13
1014 #define FO2_ENABLE_ATIO_TYPE_3 BIT_0
1015 #define FO2_REV_LOOPBACK BIT_1
1017 #define FO3_ENABLE_EMERG_IOCB BIT_0
1018 #define FO3_AE_RND_ERROR BIT_1
1020 /* 24XX additional firmware options */
1021 #define ADD_FO_COUNT 3
1022 #define ADD_FO1_DISABLE_GPIO_LED_CTRL BIT_6 /* LED bits */
1023 #define ADD_FO1_ENABLE_PUREX_IOCB BIT_10
1025 #define ADD_FO2_ENABLE_SEL_CLS2 BIT_5
1027 #define ADD_FO3_NO_ABT_ON_LINK_DOWN BIT_14
1030 * ISP mailbox commands
1032 #define MBC_LOAD_RAM 1 /* Load RAM. */
1033 #define MBC_EXECUTE_FIRMWARE 2 /* Execute firmware. */
1034 #define MBC_READ_RAM_WORD 5 /* Read RAM word. */
1035 #define MBC_MAILBOX_REGISTER_TEST 6 /* Wrap incoming mailboxes */
1036 #define MBC_VERIFY_CHECKSUM 7 /* Verify checksum. */
1037 #define MBC_GET_FIRMWARE_VERSION 8 /* Get firmware revision. */
1038 #define MBC_LOAD_RISC_RAM 9 /* Load RAM command. */
1039 #define MBC_DUMP_RISC_RAM 0xa /* Dump RAM command. */
1040 #define MBC_SECURE_FLASH_UPDATE 0xa /* Secure Flash Update(28xx) */
1041 #define MBC_LOAD_RISC_RAM_EXTENDED 0xb /* Load RAM extended. */
1042 #define MBC_DUMP_RISC_RAM_EXTENDED 0xc /* Dump RAM extended. */
1043 #define MBC_WRITE_RAM_WORD_EXTENDED 0xd /* Write RAM word extended */
1044 #define MBC_READ_RAM_EXTENDED 0xf /* Read RAM extended. */
1045 #define MBC_IOCB_COMMAND 0x12 /* Execute IOCB command. */
1046 #define MBC_STOP_FIRMWARE 0x14 /* Stop firmware. */
1047 #define MBC_ABORT_COMMAND 0x15 /* Abort IOCB command. */
1048 #define MBC_ABORT_DEVICE 0x16 /* Abort device (ID/LUN). */
1049 #define MBC_ABORT_TARGET 0x17 /* Abort target (ID). */
1050 #define MBC_RESET 0x18 /* Reset. */
1051 #define MBC_GET_ADAPTER_LOOP_ID 0x20 /* Get loop id of ISP2200. */
1052 #define MBC_GET_SET_ZIO_THRESHOLD 0x21 /* Get/SET ZIO THRESHOLD. */
1053 #define MBC_GET_RETRY_COUNT 0x22 /* Get f/w retry cnt/delay. */
1054 #define MBC_DISABLE_VI 0x24 /* Disable VI operation. */
1055 #define MBC_ENABLE_VI 0x25 /* Enable VI operation. */
1056 #define MBC_GET_FIRMWARE_OPTION 0x28 /* Get Firmware Options. */
1057 #define MBC_GET_MEM_OFFLOAD_CNTRL_STAT 0x34 /* Memory Offload ctrl/Stat*/
1058 #define MBC_SET_FIRMWARE_OPTION 0x38 /* Set Firmware Options. */
1059 #define MBC_LOOP_PORT_BYPASS 0x40 /* Loop Port Bypass. */
1060 #define MBC_LOOP_PORT_ENABLE 0x41 /* Loop Port Enable. */
1061 #define MBC_GET_RESOURCE_COUNTS 0x42 /* Get Resource Counts. */
1062 #define MBC_NON_PARTICIPATE 0x43 /* Non-Participating Mode. */
1063 #define MBC_DIAGNOSTIC_ECHO 0x44 /* Diagnostic echo. */
1064 #define MBC_DIAGNOSTIC_LOOP_BACK 0x45 /* Diagnostic loop back. */
1065 #define MBC_ONLINE_SELF_TEST 0x46 /* Online self-test. */
1066 #define MBC_ENHANCED_GET_PORT_DATABASE 0x47 /* Get port database + login */
1067 #define MBC_CONFIGURE_VF 0x4b /* Configure VFs */
1068 #define MBC_RESET_LINK_STATUS 0x52 /* Reset Link Error Status */
1069 #define MBC_IOCB_COMMAND_A64 0x54 /* Execute IOCB command (64) */
1070 #define MBC_PORT_LOGOUT 0x56 /* Port Logout request */
1071 #define MBC_SEND_RNID_ELS 0x57 /* Send RNID ELS request */
1072 #define MBC_SET_RNID_PARAMS 0x59 /* Set RNID parameters */
1073 #define MBC_GET_RNID_PARAMS 0x5a /* Get RNID parameters */
1074 #define MBC_DATA_RATE 0x5d /* Data Rate */
1075 #define MBC_INITIALIZE_FIRMWARE 0x60 /* Initialize firmware */
1076 #define MBC_INITIATE_LIP 0x62 /* Initiate Loop */
1077 /* Initialization Procedure */
1078 #define MBC_GET_FC_AL_POSITION_MAP 0x63 /* Get FC_AL Position Map. */
1079 #define MBC_GET_PORT_DATABASE 0x64 /* Get Port Database. */
1080 #define MBC_CLEAR_ACA 0x65 /* Clear ACA. */
1081 #define MBC_TARGET_RESET 0x66 /* Target Reset. */
1082 #define MBC_CLEAR_TASK_SET 0x67 /* Clear Task Set. */
1083 #define MBC_ABORT_TASK_SET 0x68 /* Abort Task Set. */
1084 #define MBC_GET_FIRMWARE_STATE 0x69 /* Get firmware state. */
1085 #define MBC_GET_PORT_NAME 0x6a /* Get port name. */
1086 #define MBC_GET_LINK_STATUS 0x6b /* Get port link status. */
1087 #define MBC_LIP_RESET 0x6c /* LIP reset. */
1088 #define MBC_SEND_SNS_COMMAND 0x6e /* Send Simple Name Server */
1090 #define MBC_LOGIN_FABRIC_PORT 0x6f /* Login fabric port. */
1091 #define MBC_SEND_CHANGE_REQUEST 0x70 /* Send Change Request. */
1092 #define MBC_LOGOUT_FABRIC_PORT 0x71 /* Logout fabric port. */
1093 #define MBC_LIP_FULL_LOGIN 0x72 /* Full login LIP. */
1094 #define MBC_LOGIN_LOOP_PORT 0x74 /* Login Loop Port. */
1095 #define MBC_PORT_NODE_NAME_LIST 0x75 /* Get port/node name list. */
1096 #define MBC_INITIALIZE_RECEIVE_QUEUE 0x77 /* Initialize receive queue */
1097 #define MBC_UNLOAD_IP 0x79 /* Shutdown IP */
1098 #define MBC_GET_ID_LIST 0x7C /* Get Port ID list. */
1099 #define MBC_SEND_LFA_COMMAND 0x7D /* Send Loop Fabric Address */
1100 #define MBC_LUN_RESET 0x7E /* Send LUN reset */
1103 * all the Mt. Rainier mailbox command codes that clash with FC/FCoE ones
1104 * should be defined with MBC_MR_*
1106 #define MBC_MR_DRV_SHUTDOWN 0x6A
1109 * ISP24xx mailbox commands
1111 #define MBC_WRITE_SERDES 0x3 /* Write serdes word. */
1112 #define MBC_READ_SERDES 0x4 /* Read serdes word. */
1113 #define MBC_LOAD_DUMP_MPI_RAM 0x5 /* Load/Dump MPI RAM. */
1114 #define MBC_SERDES_PARAMS 0x10 /* Serdes Tx Parameters. */
1115 #define MBC_GET_IOCB_STATUS 0x12 /* Get IOCB status command. */
1116 #define MBC_PORT_PARAMS 0x1A /* Port iDMA Parameters. */
1117 #define MBC_GET_TIMEOUT_PARAMS 0x22 /* Get FW timeouts. */
1118 #define MBC_TRACE_CONTROL 0x27 /* Trace control command. */
1119 #define MBC_GEN_SYSTEM_ERROR 0x2a /* Generate System Error. */
1120 #define MBC_WRITE_SFP 0x30 /* Write SFP Data. */
1121 #define MBC_READ_SFP 0x31 /* Read SFP Data. */
1122 #define MBC_SET_TIMEOUT_PARAMS 0x32 /* Set FW timeouts. */
1123 #define MBC_DPORT_DIAGNOSTICS 0x47 /* D-Port Diagnostics */
1124 #define MBC_MID_INITIALIZE_FIRMWARE 0x48 /* MID Initialize firmware. */
1125 #define MBC_MID_GET_VP_DATABASE 0x49 /* MID Get VP Database. */
1126 #define MBC_MID_GET_VP_ENTRY 0x4a /* MID Get VP Entry. */
1127 #define MBC_HOST_MEMORY_COPY 0x53 /* Host Memory Copy. */
1128 #define MBC_SEND_RNFT_ELS 0x5e /* Send RNFT ELS request */
1129 #define MBC_GET_LINK_PRIV_STATS 0x6d /* Get link & private data. */
1130 #define MBC_LINK_INITIALIZATION 0x72 /* Do link initialization. */
1131 #define MBC_SET_VENDOR_ID 0x76 /* Set Vendor ID. */
1132 #define MBC_PORT_RESET 0x120 /* Port Reset */
1133 #define MBC_SET_PORT_CONFIG 0x122 /* Set port configuration */
1134 #define MBC_GET_PORT_CONFIG 0x123 /* Get port configuration */
1137 * ISP81xx mailbox commands
1139 #define MBC_WRITE_MPI_REGISTER 0x01 /* Write MPI Register. */
1142 * ISP8044 mailbox commands
1144 #define MBC_SET_GET_ETH_SERDES_REG 0x150
1145 #define HCS_WRITE_SERDES 0x3
1146 #define HCS_READ_SERDES 0x4
1148 /* Firmware return data sizes */
1149 #define FCAL_MAP_SIZE 128
1151 /* Mailbox bit definitions for out_mb and in_mb */
1152 #define MBX_31 BIT_31
1153 #define MBX_30 BIT_30
1154 #define MBX_29 BIT_29
1155 #define MBX_28 BIT_28
1156 #define MBX_27 BIT_27
1157 #define MBX_26 BIT_26
1158 #define MBX_25 BIT_25
1159 #define MBX_24 BIT_24
1160 #define MBX_23 BIT_23
1161 #define MBX_22 BIT_22
1162 #define MBX_21 BIT_21
1163 #define MBX_20 BIT_20
1164 #define MBX_19 BIT_19
1165 #define MBX_18 BIT_18
1166 #define MBX_17 BIT_17
1167 #define MBX_16 BIT_16
1168 #define MBX_15 BIT_15
1169 #define MBX_14 BIT_14
1170 #define MBX_13 BIT_13
1171 #define MBX_12 BIT_12
1172 #define MBX_11 BIT_11
1173 #define MBX_10 BIT_10
1185 #define RNID_TYPE_PORT_LOGIN 0x7
1186 #define RNID_TYPE_SET_VERSION 0x9
1187 #define RNID_TYPE_ASIC_TEMP 0xC
1190 * Firmware state codes from get firmware state mailbox command
1192 #define FSTATE_CONFIG_WAIT 0
1193 #define FSTATE_WAIT_AL_PA 1
1194 #define FSTATE_WAIT_LOGIN 2
1195 #define FSTATE_READY 3
1196 #define FSTATE_LOSS_OF_SYNC 4
1197 #define FSTATE_ERROR 5
1198 #define FSTATE_REINIT 6
1199 #define FSTATE_NON_PART 7
1201 #define FSTATE_CONFIG_CORRECT 0
1202 #define FSTATE_P2P_RCV_LIP 1
1203 #define FSTATE_P2P_CHOOSE_LOOP 2
1204 #define FSTATE_P2P_RCV_UNIDEN_LIP 3
1205 #define FSTATE_FATAL_ERROR 4
1206 #define FSTATE_LOOP_BACK_CONN 5
1208 #define QLA27XX_IMG_STATUS_VER_MAJOR 0x01
1209 #define QLA27XX_IMG_STATUS_VER_MINOR 0x00
1210 #define QLA27XX_IMG_STATUS_SIGN 0xFACEFADE
1211 #define QLA28XX_IMG_STATUS_SIGN 0xFACEFADF
1212 #define QLA28XX_IMG_STATUS_SIGN 0xFACEFADF
1213 #define QLA28XX_AUX_IMG_STATUS_SIGN 0xFACEFAED
1214 #define QLA27XX_DEFAULT_IMAGE 0
1215 #define QLA27XX_PRIMARY_IMAGE 1
1216 #define QLA27XX_SECONDARY_IMAGE 2
1219 * Port Database structure definition
1220 * Little endian except where noted.
1222 #define PORT_DATABASE_SIZE 128 /* bytes */
1226 uint8_t master_state;
1227 uint8_t slave_state;
1228 uint8_t reserved[2];
1229 uint8_t hard_address;
1232 uint8_t node_name[WWN_SIZE];
1233 uint8_t port_name[WWN_SIZE];
1234 uint16_t execution_throttle;
1235 uint16_t execution_count;
1236 uint8_t reset_count;
1238 uint16_t resource_allocation;
1239 uint16_t current_allocation;
1240 uint16_t queue_head;
1241 uint16_t queue_tail;
1242 uint16_t transmit_execution_list_next;
1243 uint16_t transmit_execution_list_previous;
1244 uint16_t common_features;
1245 uint16_t total_concurrent_sequences;
1246 uint16_t RO_by_information_category;
1249 uint16_t receive_data_size;
1250 uint16_t concurrent_sequences;
1251 uint16_t open_sequences_per_exchange;
1252 uint16_t lun_abort_flags;
1253 uint16_t lun_stop_flags;
1254 uint16_t stop_queue_head;
1255 uint16_t stop_queue_tail;
1256 uint16_t port_retry_timer;
1257 uint16_t next_sequence_id;
1258 uint16_t frame_count;
1259 uint16_t PRLI_payload_length;
1260 uint8_t prli_svc_param_word_0[2]; /* Big endian */
1261 /* Bits 15-0 of word 0 */
1262 uint8_t prli_svc_param_word_3[2]; /* Big endian */
1263 /* Bits 15-0 of word 3 */
1265 uint16_t extended_lun_info_list_pointer;
1266 uint16_t extended_lun_stop_list_pointer;
1270 * Port database slave/master states
1272 #define PD_STATE_DISCOVERY 0
1273 #define PD_STATE_WAIT_DISCOVERY_ACK 1
1274 #define PD_STATE_PORT_LOGIN 2
1275 #define PD_STATE_WAIT_PORT_LOGIN_ACK 3
1276 #define PD_STATE_PROCESS_LOGIN 4
1277 #define PD_STATE_WAIT_PROCESS_LOGIN_ACK 5
1278 #define PD_STATE_PORT_LOGGED_IN 6
1279 #define PD_STATE_PORT_UNAVAILABLE 7
1280 #define PD_STATE_PROCESS_LOGOUT 8
1281 #define PD_STATE_WAIT_PROCESS_LOGOUT_ACK 9
1282 #define PD_STATE_PORT_LOGOUT 10
1283 #define PD_STATE_WAIT_PORT_LOGOUT_ACK 11
1286 #define QLA_ZIO_MODE_6 (BIT_2 | BIT_1)
1287 #define QLA_ZIO_DISABLED 0
1288 #define QLA_ZIO_DEFAULT_TIMER 2
1291 * ISP Initialization Control Block.
1292 * Little endian except where noted.
1294 #define ICB_VERSION 1
1300 * LSB BIT 0 = Enable Hard Loop Id
1301 * LSB BIT 1 = Enable Fairness
1302 * LSB BIT 2 = Enable Full-Duplex
1303 * LSB BIT 3 = Enable Fast Posting
1304 * LSB BIT 4 = Enable Target Mode
1305 * LSB BIT 5 = Disable Initiator Mode
1306 * LSB BIT 6 = Enable ADISC
1307 * LSB BIT 7 = Enable Target Inquiry Data
1309 * MSB BIT 0 = Enable PDBC Notify
1310 * MSB BIT 1 = Non Participating LIP
1311 * MSB BIT 2 = Descending Loop ID Search
1312 * MSB BIT 3 = Acquire Loop ID in LIPA
1313 * MSB BIT 4 = Stop PortQ on Full Status
1314 * MSB BIT 5 = Full Login after LIP
1315 * MSB BIT 6 = Node Name Option
1316 * MSB BIT 7 = Ext IFWCB enable bit
1318 uint8_t firmware_options[2];
1320 uint16_t frame_payload_size;
1321 uint16_t max_iocb_allocation;
1322 uint16_t execution_throttle;
1323 uint8_t retry_count;
1324 uint8_t retry_delay; /* unused */
1325 uint8_t port_name[WWN_SIZE]; /* Big endian. */
1326 uint16_t hard_address;
1327 uint8_t inquiry_data;
1328 uint8_t login_timeout;
1329 uint8_t node_name[WWN_SIZE]; /* Big endian. */
1331 uint16_t request_q_outpointer;
1332 uint16_t response_q_inpointer;
1333 uint16_t request_q_length;
1334 uint16_t response_q_length;
1335 __le64 request_q_address __packed;
1336 __le64 response_q_address __packed;
1338 uint16_t lun_enables;
1339 uint8_t command_resource_count;
1340 uint8_t immediate_notify_resource_count;
1342 uint8_t reserved_2[2];
1345 * LSB BIT 0 = Timer Operation mode bit 0
1346 * LSB BIT 1 = Timer Operation mode bit 1
1347 * LSB BIT 2 = Timer Operation mode bit 2
1348 * LSB BIT 3 = Timer Operation mode bit 3
1349 * LSB BIT 4 = Init Config Mode bit 0
1350 * LSB BIT 5 = Init Config Mode bit 1
1351 * LSB BIT 6 = Init Config Mode bit 2
1352 * LSB BIT 7 = Enable Non part on LIHA failure
1354 * MSB BIT 0 = Enable class 2
1355 * MSB BIT 1 = Enable ACK0
1358 * MSB BIT 4 = FC Tape Enable
1359 * MSB BIT 5 = Enable FC Confirm
1360 * MSB BIT 6 = Enable command queuing in target mode
1361 * MSB BIT 7 = No Logo On Link Down
1363 uint8_t add_firmware_options[2];
1365 uint8_t response_accumulation_timer;
1366 uint8_t interrupt_delay_timer;
1369 * LSB BIT 0 = Enable Read xfr_rdy
1370 * LSB BIT 1 = Soft ID only
1373 * LSB BIT 4 = FCP RSP Payload [0]
1374 * LSB BIT 5 = FCP RSP Payload [1] / Sbus enable - 2200
1375 * LSB BIT 6 = Enable Out-of-Order frame handling
1376 * LSB BIT 7 = Disable Automatic PLOGI on Local Loop
1378 * MSB BIT 0 = Sbus enable - 2300
1382 * MSB BIT 4 = LED mode
1383 * MSB BIT 5 = enable 50 ohm termination
1384 * MSB BIT 6 = Data Rate (2300 only)
1385 * MSB BIT 7 = Data Rate (2300 only)
1387 uint8_t special_options[2];
1389 uint8_t reserved_3[26];
1393 * Get Link Status mailbox command return buffer.
1395 #define GLSO_SEND_RPS BIT_0
1396 #define GLSO_USE_DID BIT_3
1398 struct link_statistics {
1399 uint32_t link_fail_cnt;
1400 uint32_t loss_sync_cnt;
1401 uint32_t loss_sig_cnt;
1402 uint32_t prim_seq_err_cnt;
1403 uint32_t inval_xmit_word_cnt;
1404 uint32_t inval_crc_cnt;
1406 uint32_t link_up_cnt;
1407 uint32_t link_down_loop_init_tmo;
1408 uint32_t link_down_los;
1409 uint32_t link_down_loss_rcv_clk;
1410 uint32_t reserved0[5];
1411 uint32_t port_cfg_chg;
1412 uint32_t reserved1[11];
1413 uint32_t rsp_q_full;
1414 uint32_t atio_q_full;
1416 uint32_t els_proto_err;
1420 uint32_t discarded_frames;
1421 uint32_t dropped_frames;
1424 uint32_t reserved4[4];
1426 uint32_t rcv_exfail;
1428 uint32_t seq_frm_miss;
1431 uint32_t nport_full;
1434 uint32_t fpm_recv_word_cnt_lo;
1435 uint32_t fpm_recv_word_cnt_hi;
1436 uint32_t fpm_disc_word_cnt_lo;
1437 uint32_t fpm_disc_word_cnt_hi;
1438 uint32_t fpm_xmit_word_cnt_lo;
1439 uint32_t fpm_xmit_word_cnt_hi;
1440 uint32_t reserved6[70];
1444 * NVRAM Command values.
1446 #define NV_START_BIT BIT_2
1447 #define NV_WRITE_OP (BIT_26+BIT_24)
1448 #define NV_READ_OP (BIT_26+BIT_25)
1449 #define NV_ERASE_OP (BIT_26+BIT_25+BIT_24)
1450 #define NV_MASK_OP (BIT_26+BIT_25+BIT_24)
1451 #define NV_DELAY_COUNT 10
1454 * QLogic ISP2100, ISP2200 and ISP2300 NVRAM structure definition.
1461 uint8_t nvram_version;
1465 * NVRAM RISC parameter block
1467 uint8_t parameter_block_version;
1471 * LSB BIT 0 = Enable Hard Loop Id
1472 * LSB BIT 1 = Enable Fairness
1473 * LSB BIT 2 = Enable Full-Duplex
1474 * LSB BIT 3 = Enable Fast Posting
1475 * LSB BIT 4 = Enable Target Mode
1476 * LSB BIT 5 = Disable Initiator Mode
1477 * LSB BIT 6 = Enable ADISC
1478 * LSB BIT 7 = Enable Target Inquiry Data
1480 * MSB BIT 0 = Enable PDBC Notify
1481 * MSB BIT 1 = Non Participating LIP
1482 * MSB BIT 2 = Descending Loop ID Search
1483 * MSB BIT 3 = Acquire Loop ID in LIPA
1484 * MSB BIT 4 = Stop PortQ on Full Status
1485 * MSB BIT 5 = Full Login after LIP
1486 * MSB BIT 6 = Node Name Option
1487 * MSB BIT 7 = Ext IFWCB enable bit
1489 uint8_t firmware_options[2];
1491 uint16_t frame_payload_size;
1492 uint16_t max_iocb_allocation;
1493 uint16_t execution_throttle;
1494 uint8_t retry_count;
1495 uint8_t retry_delay; /* unused */
1496 uint8_t port_name[WWN_SIZE]; /* Big endian. */
1497 uint16_t hard_address;
1498 uint8_t inquiry_data;
1499 uint8_t login_timeout;
1500 uint8_t node_name[WWN_SIZE]; /* Big endian. */
1503 * LSB BIT 0 = Timer Operation mode bit 0
1504 * LSB BIT 1 = Timer Operation mode bit 1
1505 * LSB BIT 2 = Timer Operation mode bit 2
1506 * LSB BIT 3 = Timer Operation mode bit 3
1507 * LSB BIT 4 = Init Config Mode bit 0
1508 * LSB BIT 5 = Init Config Mode bit 1
1509 * LSB BIT 6 = Init Config Mode bit 2
1510 * LSB BIT 7 = Enable Non part on LIHA failure
1512 * MSB BIT 0 = Enable class 2
1513 * MSB BIT 1 = Enable ACK0
1516 * MSB BIT 4 = FC Tape Enable
1517 * MSB BIT 5 = Enable FC Confirm
1518 * MSB BIT 6 = Enable command queuing in target mode
1519 * MSB BIT 7 = No Logo On Link Down
1521 uint8_t add_firmware_options[2];
1523 uint8_t response_accumulation_timer;
1524 uint8_t interrupt_delay_timer;
1527 * LSB BIT 0 = Enable Read xfr_rdy
1528 * LSB BIT 1 = Soft ID only
1531 * LSB BIT 4 = FCP RSP Payload [0]
1532 * LSB BIT 5 = FCP RSP Payload [1] / Sbus enable - 2200
1533 * LSB BIT 6 = Enable Out-of-Order frame handling
1534 * LSB BIT 7 = Disable Automatic PLOGI on Local Loop
1536 * MSB BIT 0 = Sbus enable - 2300
1540 * MSB BIT 4 = LED mode
1541 * MSB BIT 5 = enable 50 ohm termination
1542 * MSB BIT 6 = Data Rate (2300 only)
1543 * MSB BIT 7 = Data Rate (2300 only)
1545 uint8_t special_options[2];
1547 /* Reserved for expanded RISC parameter block */
1548 uint8_t reserved_2[22];
1551 * LSB BIT 0 = Tx Sensitivity 1G bit 0
1552 * LSB BIT 1 = Tx Sensitivity 1G bit 1
1553 * LSB BIT 2 = Tx Sensitivity 1G bit 2
1554 * LSB BIT 3 = Tx Sensitivity 1G bit 3
1555 * LSB BIT 4 = Rx Sensitivity 1G bit 0
1556 * LSB BIT 5 = Rx Sensitivity 1G bit 1
1557 * LSB BIT 6 = Rx Sensitivity 1G bit 2
1558 * LSB BIT 7 = Rx Sensitivity 1G bit 3
1560 * MSB BIT 0 = Tx Sensitivity 2G bit 0
1561 * MSB BIT 1 = Tx Sensitivity 2G bit 1
1562 * MSB BIT 2 = Tx Sensitivity 2G bit 2
1563 * MSB BIT 3 = Tx Sensitivity 2G bit 3
1564 * MSB BIT 4 = Rx Sensitivity 2G bit 0
1565 * MSB BIT 5 = Rx Sensitivity 2G bit 1
1566 * MSB BIT 6 = Rx Sensitivity 2G bit 2
1567 * MSB BIT 7 = Rx Sensitivity 2G bit 3
1569 * LSB BIT 0 = Output Swing 1G bit 0
1570 * LSB BIT 1 = Output Swing 1G bit 1
1571 * LSB BIT 2 = Output Swing 1G bit 2
1572 * LSB BIT 3 = Output Emphasis 1G bit 0
1573 * LSB BIT 4 = Output Emphasis 1G bit 1
1574 * LSB BIT 5 = Output Swing 2G bit 0
1575 * LSB BIT 6 = Output Swing 2G bit 1
1576 * LSB BIT 7 = Output Swing 2G bit 2
1578 * MSB BIT 0 = Output Emphasis 2G bit 0
1579 * MSB BIT 1 = Output Emphasis 2G bit 1
1580 * MSB BIT 2 = Output Enable
1587 uint8_t seriallink_options[4];
1590 * NVRAM host parameter block
1592 * LSB BIT 0 = Enable spinup delay
1593 * LSB BIT 1 = Disable BIOS
1594 * LSB BIT 2 = Enable Memory Map BIOS
1595 * LSB BIT 3 = Enable Selectable Boot
1596 * LSB BIT 4 = Disable RISC code load
1597 * LSB BIT 5 = Set cache line size 1
1598 * LSB BIT 6 = PCI Parity Disable
1599 * LSB BIT 7 = Enable extended logging
1601 * MSB BIT 0 = Enable 64bit addressing
1602 * MSB BIT 1 = Enable lip reset
1603 * MSB BIT 2 = Enable lip full login
1604 * MSB BIT 3 = Enable target reset
1605 * MSB BIT 4 = Enable database storage
1606 * MSB BIT 5 = Enable cache flush read
1607 * MSB BIT 6 = Enable database load
1608 * MSB BIT 7 = Enable alternate WWN
1612 uint8_t boot_node_name[WWN_SIZE];
1613 uint8_t boot_lun_number;
1614 uint8_t reset_delay;
1615 uint8_t port_down_retry_count;
1616 uint8_t boot_id_number;
1617 uint16_t max_luns_per_target;
1618 uint8_t fcode_boot_port_name[WWN_SIZE];
1619 uint8_t alternate_port_name[WWN_SIZE];
1620 uint8_t alternate_node_name[WWN_SIZE];
1623 * BIT 0 = Selective Login
1624 * BIT 1 = Alt-Boot Enable
1626 * BIT 3 = Boot Order List
1628 * BIT 5 = Selective LUN
1632 uint8_t efi_parameters;
1634 uint8_t link_down_timeout;
1636 uint8_t adapter_id[16];
1638 uint8_t alt1_boot_node_name[WWN_SIZE];
1639 uint16_t alt1_boot_lun_number;
1640 uint8_t alt2_boot_node_name[WWN_SIZE];
1641 uint16_t alt2_boot_lun_number;
1642 uint8_t alt3_boot_node_name[WWN_SIZE];
1643 uint16_t alt3_boot_lun_number;
1644 uint8_t alt4_boot_node_name[WWN_SIZE];
1645 uint16_t alt4_boot_lun_number;
1646 uint8_t alt5_boot_node_name[WWN_SIZE];
1647 uint16_t alt5_boot_lun_number;
1648 uint8_t alt6_boot_node_name[WWN_SIZE];
1649 uint16_t alt6_boot_lun_number;
1650 uint8_t alt7_boot_node_name[WWN_SIZE];
1651 uint16_t alt7_boot_lun_number;
1653 uint8_t reserved_3[2];
1655 /* Offset 200-215 : Model Number */
1656 uint8_t model_number[16];
1658 /* OEM related items */
1659 uint8_t oem_specific[16];
1662 * NVRAM Adapter Features offset 232-239
1664 * LSB BIT 0 = External GBIC
1665 * LSB BIT 1 = Risc RAM parity
1666 * LSB BIT 2 = Buffer Plus Module
1667 * LSB BIT 3 = Multi Chip Adapter
1668 * LSB BIT 4 = Internal connector
1682 uint8_t adapter_features[2];
1684 uint8_t reserved_4[16];
1686 /* Subsystem vendor ID for ISP2200 */
1687 uint16_t subsystem_vendor_id_2200;
1689 /* Subsystem device ID for ISP2200 */
1690 uint16_t subsystem_device_id_2200;
1697 * ISP queue - response queue entry definition.
1700 uint8_t entry_type; /* Entry type. */
1701 uint8_t entry_count; /* Entry count. */
1702 uint8_t sys_define; /* System defined. */
1703 uint8_t entry_status; /* Entry Status. */
1704 uint32_t handle; /* System defined handle */
1707 #define RESPONSE_PROCESSED 0xDEADDEAD /* Signature */
1711 * ISP queue - ATIO queue entry definition.
1714 uint8_t entry_type; /* Entry type. */
1715 uint8_t entry_count; /* Entry count. */
1716 __le16 attr_n_length;
1719 #define ATIO_PROCESSED 0xDEADDEAD /* Signature */
1730 #define SET_TARGET_ID(ha, to, from) \
1732 if (HAS_EXTENDED_IDS(ha)) \
1733 to.extended = cpu_to_le16(from); \
1735 to.id.standard = (uint8_t)from; \
1739 * ISP queue - command entry structure definition.
1741 #define COMMAND_TYPE 0x11 /* Command entry */
1743 uint8_t entry_type; /* Entry type. */
1744 uint8_t entry_count; /* Entry count. */
1745 uint8_t sys_define; /* System defined. */
1746 uint8_t entry_status; /* Entry Status. */
1747 uint32_t handle; /* System handle. */
1748 target_id_t target; /* SCSI ID */
1749 uint16_t lun; /* SCSI LUN */
1750 uint16_t control_flags; /* Control flags. */
1751 #define CF_WRITE BIT_6
1752 #define CF_READ BIT_5
1753 #define CF_SIMPLE_TAG BIT_3
1754 #define CF_ORDERED_TAG BIT_2
1755 #define CF_HEAD_TAG BIT_1
1756 uint16_t reserved_1;
1757 uint16_t timeout; /* Command timeout. */
1758 uint16_t dseg_count; /* Data segment count. */
1759 uint8_t scsi_cdb[MAX_CMDSZ]; /* SCSI command words. */
1760 uint32_t byte_count; /* Total byte count. */
1762 struct dsd32 dsd32[3];
1763 struct dsd64 dsd64[2];
1768 * ISP queue - 64-Bit addressing, command entry structure definition.
1770 #define COMMAND_A64_TYPE 0x19 /* Command A64 entry */
1772 uint8_t entry_type; /* Entry type. */
1773 uint8_t entry_count; /* Entry count. */
1774 uint8_t sys_define; /* System defined. */
1775 uint8_t entry_status; /* Entry Status. */
1776 uint32_t handle; /* System handle. */
1777 target_id_t target; /* SCSI ID */
1778 uint16_t lun; /* SCSI LUN */
1779 uint16_t control_flags; /* Control flags. */
1780 uint16_t reserved_1;
1781 uint16_t timeout; /* Command timeout. */
1782 uint16_t dseg_count; /* Data segment count. */
1783 uint8_t scsi_cdb[MAX_CMDSZ]; /* SCSI command words. */
1784 uint32_t byte_count; /* Total byte count. */
1785 struct dsd64 dsd[2];
1786 } cmd_a64_entry_t, request_t;
1789 * ISP queue - continuation entry structure definition.
1791 #define CONTINUE_TYPE 0x02 /* Continuation entry. */
1793 uint8_t entry_type; /* Entry type. */
1794 uint8_t entry_count; /* Entry count. */
1795 uint8_t sys_define; /* System defined. */
1796 uint8_t entry_status; /* Entry Status. */
1798 struct dsd32 dsd[7];
1802 * ISP queue - 64-Bit addressing, continuation entry structure definition.
1804 #define CONTINUE_A64_TYPE 0x0A /* Continuation A64 entry. */
1806 uint8_t entry_type; /* Entry type. */
1807 uint8_t entry_count; /* Entry count. */
1808 uint8_t sys_define; /* System defined. */
1809 uint8_t entry_status; /* Entry Status. */
1810 struct dsd64 dsd[5];
1813 #define PO_MODE_DIF_INSERT 0
1814 #define PO_MODE_DIF_REMOVE 1
1815 #define PO_MODE_DIF_PASS 2
1816 #define PO_MODE_DIF_REPLACE 3
1817 #define PO_MODE_DIF_TCP_CKSUM 6
1818 #define PO_ENABLE_INCR_GUARD_SEED BIT_3
1819 #define PO_DISABLE_GUARD_CHECK BIT_4
1820 #define PO_DISABLE_INCR_REF_TAG BIT_5
1821 #define PO_DIS_HEADER_MODE BIT_7
1822 #define PO_ENABLE_DIF_BUNDLING BIT_8
1823 #define PO_DIS_FRAME_MODE BIT_9
1824 #define PO_DIS_VALD_APP_ESC BIT_10 /* Dis validation for escape tag/ffffh */
1825 #define PO_DIS_VALD_APP_REF_ESC BIT_11
1827 #define PO_DIS_APP_TAG_REPL BIT_12 /* disable REG Tag replacement */
1828 #define PO_DIS_REF_TAG_REPL BIT_13
1829 #define PO_DIS_APP_TAG_VALD BIT_14 /* disable REF Tag validation */
1830 #define PO_DIS_REF_TAG_VALD BIT_15
1833 * ISP queue - 64-Bit addressing, continuation crc entry structure definition.
1835 struct crc_context {
1836 uint32_t handle; /* System handle. */
1839 uint8_t ref_tag_mask[4]; /* Validation/Replacement Mask*/
1840 uint8_t app_tag_mask[2]; /* Validation/Replacement Mask*/
1841 __le16 guard_seed; /* Initial Guard Seed */
1842 __le16 prot_opts; /* Requested Data Protection Mode */
1843 __le16 blk_size; /* Data size in bytes */
1844 uint16_t runt_blk_guard; /* Guard value for runt block (tape
1846 __le32 byte_count; /* Total byte count/ total data
1850 uint32_t reserved_1;
1851 uint16_t reserved_2;
1852 uint16_t reserved_3;
1853 uint32_t reserved_4;
1854 struct dsd64 data_dsd;
1855 uint32_t reserved_5[2];
1856 uint32_t reserved_6;
1859 __le32 dif_byte_count; /* Total DIF byte
1861 uint16_t reserved_1;
1862 __le16 dseg_count; /* Data segment count */
1863 uint32_t reserved_2;
1864 struct dsd64 data_dsd;
1865 struct dsd64 dif_dsd;
1869 struct fcp_cmnd fcp_cmnd;
1870 dma_addr_t crc_ctx_dma;
1871 /* List of DMA context transfers */
1872 struct list_head dsd_list;
1874 /* List of DIF Bundling context DMA address */
1875 struct list_head ldif_dsd_list;
1878 struct list_head ldif_dma_hndl_list;
1881 /* This structure should not exceed 512 bytes */
1884 #define CRC_CONTEXT_LEN_FW (offsetof(struct crc_context, fcp_cmnd.lun))
1885 #define CRC_CONTEXT_FCPCMND_OFF (offsetof(struct crc_context, fcp_cmnd.lun))
1888 * ISP queue - status entry structure definition.
1890 #define STATUS_TYPE 0x03 /* Status entry. */
1892 uint8_t entry_type; /* Entry type. */
1893 uint8_t entry_count; /* Entry count. */
1894 uint8_t sys_define; /* System defined. */
1895 uint8_t entry_status; /* Entry Status. */
1896 uint32_t handle; /* System handle. */
1897 uint16_t scsi_status; /* SCSI status. */
1898 uint16_t comp_status; /* Completion status. */
1899 uint16_t state_flags; /* State flags. */
1900 uint16_t status_flags; /* Status flags. */
1901 uint16_t rsp_info_len; /* Response Info Length. */
1902 uint16_t req_sense_length; /* Request sense data length. */
1903 uint32_t residual_length; /* Residual transfer length. */
1904 uint8_t rsp_info[8]; /* FCP response information. */
1905 uint8_t req_sense_data[32]; /* Request sense data. */
1909 * Status entry entry status
1911 #define RF_RQ_DMA_ERROR BIT_6 /* Request Queue DMA error. */
1912 #define RF_INV_E_ORDER BIT_5 /* Invalid entry order. */
1913 #define RF_INV_E_COUNT BIT_4 /* Invalid entry count. */
1914 #define RF_INV_E_PARAM BIT_3 /* Invalid entry parameter. */
1915 #define RF_INV_E_TYPE BIT_2 /* Invalid entry type. */
1916 #define RF_BUSY BIT_1 /* Busy */
1917 #define RF_MASK (RF_RQ_DMA_ERROR | RF_INV_E_ORDER | RF_INV_E_COUNT | \
1918 RF_INV_E_PARAM | RF_INV_E_TYPE | RF_BUSY)
1919 #define RF_MASK_24XX (RF_INV_E_ORDER | RF_INV_E_COUNT | RF_INV_E_PARAM | \
1923 * Status entry SCSI status bit definitions.
1925 #define SS_MASK 0xfff /* Reserved bits BIT_12-BIT_15*/
1926 #define SS_RESIDUAL_UNDER BIT_11
1927 #define SS_RESIDUAL_OVER BIT_10
1928 #define SS_SENSE_LEN_VALID BIT_9
1929 #define SS_RESPONSE_INFO_LEN_VALID BIT_8
1930 #define SS_SCSI_STATUS_BYTE 0xff
1932 #define SS_RESERVE_CONFLICT (BIT_4 | BIT_3)
1933 #define SS_BUSY_CONDITION BIT_3
1934 #define SS_CONDITION_MET BIT_2
1935 #define SS_CHECK_CONDITION BIT_1
1938 * Status entry completion status
1940 #define CS_COMPLETE 0x0 /* No errors */
1941 #define CS_INCOMPLETE 0x1 /* Incomplete transfer of cmd. */
1942 #define CS_DMA 0x2 /* A DMA direction error. */
1943 #define CS_TRANSPORT 0x3 /* Transport error. */
1944 #define CS_RESET 0x4 /* SCSI bus reset occurred */
1945 #define CS_ABORTED 0x5 /* System aborted command. */
1946 #define CS_TIMEOUT 0x6 /* Timeout error. */
1947 #define CS_DATA_OVERRUN 0x7 /* Data overrun. */
1948 #define CS_DIF_ERROR 0xC /* DIF error detected */
1950 #define CS_DATA_UNDERRUN 0x15 /* Data Underrun. */
1951 #define CS_QUEUE_FULL 0x1C /* Queue Full. */
1952 #define CS_PORT_UNAVAILABLE 0x28 /* Port unavailable */
1953 /* (selection timeout) */
1954 #define CS_PORT_LOGGED_OUT 0x29 /* Port Logged Out */
1955 #define CS_PORT_CONFIG_CHG 0x2A /* Port Configuration Changed */
1956 #define CS_PORT_BUSY 0x2B /* Port Busy */
1957 #define CS_COMPLETE_CHKCOND 0x30 /* Error? */
1958 #define CS_IOCB_ERROR 0x31 /* Generic error for IOCB request
1960 #define CS_BAD_PAYLOAD 0x80 /* Driver defined */
1961 #define CS_UNKNOWN 0x81 /* Driver defined */
1962 #define CS_RETRY 0x82 /* Driver defined */
1963 #define CS_LOOP_DOWN_ABORT 0x83 /* Driver defined */
1965 #define CS_BIDIR_RD_OVERRUN 0x700
1966 #define CS_BIDIR_RD_WR_OVERRUN 0x707
1967 #define CS_BIDIR_RD_OVERRUN_WR_UNDERRUN 0x715
1968 #define CS_BIDIR_RD_UNDERRUN 0x1500
1969 #define CS_BIDIR_RD_UNDERRUN_WR_OVERRUN 0x1507
1970 #define CS_BIDIR_RD_WR_UNDERRUN 0x1515
1971 #define CS_BIDIR_DMA 0x200
1973 * Status entry status flags
1975 #define SF_ABTS_TERMINATED BIT_10
1976 #define SF_LOGOUT_SENT BIT_13
1979 * ISP queue - status continuation entry structure definition.
1981 #define STATUS_CONT_TYPE 0x10 /* Status continuation entry. */
1983 uint8_t entry_type; /* Entry type. */
1984 uint8_t entry_count; /* Entry count. */
1985 uint8_t sys_define; /* System defined. */
1986 uint8_t entry_status; /* Entry Status. */
1987 uint8_t data[60]; /* data */
1991 * ISP queue - RIO Type 1 status entry (32 bit I/O entry handles)
1992 * structure definition.
1994 #define STATUS_TYPE_21 0x21 /* Status entry. */
1996 uint8_t entry_type; /* Entry type. */
1997 uint8_t entry_count; /* Entry count. */
1998 uint8_t handle_count; /* Handle count. */
1999 uint8_t entry_status; /* Entry Status. */
2000 uint32_t handle[15]; /* System handles. */
2004 * ISP queue - RIO Type 2 status entry (16 bit I/O entry handles)
2005 * structure definition.
2007 #define STATUS_TYPE_22 0x22 /* Status entry. */
2009 uint8_t entry_type; /* Entry type. */
2010 uint8_t entry_count; /* Entry count. */
2011 uint8_t handle_count; /* Handle count. */
2012 uint8_t entry_status; /* Entry Status. */
2013 uint16_t handle[30]; /* System handles. */
2017 * ISP queue - marker entry structure definition.
2019 #define MARKER_TYPE 0x04 /* Marker entry. */
2021 uint8_t entry_type; /* Entry type. */
2022 uint8_t entry_count; /* Entry count. */
2023 uint8_t handle_count; /* Handle count. */
2024 uint8_t entry_status; /* Entry Status. */
2025 uint32_t sys_define_2; /* System defined. */
2026 target_id_t target; /* SCSI ID */
2027 uint8_t modifier; /* Modifier (7-0). */
2028 #define MK_SYNC_ID_LUN 0 /* Synchronize ID/LUN */
2029 #define MK_SYNC_ID 1 /* Synchronize ID */
2030 #define MK_SYNC_ALL 2 /* Synchronize all ID/LUN */
2031 #define MK_SYNC_LIP 3 /* Synchronize all ID/LUN, */
2032 /* clear port changed, */
2033 /* use sequence number. */
2035 uint16_t sequence_number; /* Sequence number of event */
2036 uint16_t lun; /* SCSI LUN */
2037 uint8_t reserved_2[48];
2041 * ISP queue - Management Server entry structure definition.
2043 #define MS_IOCB_TYPE 0x29 /* Management Server IOCB entry */
2045 uint8_t entry_type; /* Entry type. */
2046 uint8_t entry_count; /* Entry count. */
2047 uint8_t handle_count; /* Handle count. */
2048 uint8_t entry_status; /* Entry Status. */
2049 uint32_t handle1; /* System handle. */
2050 target_id_t loop_id;
2052 uint16_t control_flags; /* Control flags. */
2055 uint16_t cmd_dsd_count;
2056 uint16_t total_dsd_count;
2062 uint32_t rsp_bytecount;
2063 uint32_t req_bytecount;
2064 struct dsd64 req_dsd;
2065 struct dsd64 rsp_dsd;
2070 * ISP queue - Mailbox Command entry structure definition.
2072 #define MBX_IOCB_TYPE 0x39
2075 uint8_t entry_count;
2076 uint8_t sys_define1;
2077 /* Use sys_define1 for source type */
2078 #define SOURCE_SCSI 0x00
2079 #define SOURCE_IP 0x01
2080 #define SOURCE_VI 0x02
2081 #define SOURCE_SCTP 0x03
2082 #define SOURCE_MP 0x04
2083 #define SOURCE_MPIOCTL 0x05
2084 #define SOURCE_ASYNC_IOCB 0x07
2086 uint8_t entry_status;
2089 target_id_t loop_id;
2092 uint16_t state_flags;
2093 uint16_t status_flags;
2095 uint32_t sys_define2[2];
2105 uint32_t reserved_2[2];
2106 uint8_t node_name[WWN_SIZE];
2107 uint8_t port_name[WWN_SIZE];
2110 #ifndef IMMED_NOTIFY_TYPE
2111 #define IMMED_NOTIFY_TYPE 0x0D /* Immediate notify entry. */
2113 * ISP queue - immediate notify entry structure definition.
2114 * This is sent by the ISP to the Target driver.
2115 * This IOCB would have report of events sent by the
2116 * initiator, that needs to be handled by the target
2117 * driver immediately.
2119 struct imm_ntfy_from_isp {
2120 uint8_t entry_type; /* Entry type. */
2121 uint8_t entry_count; /* Entry count. */
2122 uint8_t sys_define; /* System defined. */
2123 uint8_t entry_status; /* Entry Status. */
2126 uint32_t sys_define_2; /* System defined. */
2131 uint16_t status_modifier;
2133 uint16_t task_flags;
2136 uint32_t srr_rel_offs;
2138 #define SRR_IU_DATA_IN 0x1
2139 #define SRR_IU_DATA_OUT 0x5
2140 #define SRR_IU_STATUS 0x7
2142 uint8_t reserved_2[28];
2146 uint16_t nport_handle;
2147 uint16_t reserved_2;
2149 #define NOTIFY24XX_FLAGS_GLOBAL_TPRLO BIT_1
2150 #define NOTIFY24XX_FLAGS_PUREX_IOCB BIT_0
2153 uint8_t status_subcode;
2155 uint32_t exchange_address;
2156 uint32_t srr_rel_offs;
2161 uint8_t node_name[8];
2162 } plogi; /* PLOGI/ADISC/PDISC */
2164 /* PRLI word 3 bit 0-15 */
2171 uint16_t nport_handle;
2175 uint8_t port_name[8];
2178 uint32_t reserved_5;
2183 uint16_t reserved_7;
2189 * ISP request and response queue entry sizes
2191 #define RESPONSE_ENTRY_SIZE (sizeof(response_t))
2192 #define REQUEST_ENTRY_SIZE (sizeof(request_t))
2197 * Switch info gathering structure.
2201 uint8_t node_name[WWN_SIZE];
2202 uint8_t port_name[WWN_SIZE];
2203 uint8_t fabric_port_name[WWN_SIZE];
2206 uint8_t fc4f_nvme; /* nvme fc4 feature bits */
2210 #define FC4_TYPE_FCP_SCSI 0x08
2211 #define FC4_TYPE_NVME 0x28
2212 #define FC4_TYPE_OTHER 0x0
2213 #define FC4_TYPE_UNKNOWN 0xff
2215 /* mailbox command 4G & above */
2216 struct mbx_24xx_entry {
2218 uint8_t entry_count;
2219 uint8_t sys_define1;
2220 uint8_t entry_status;
2225 #define IOCB_SIZE 64
2228 * Fibre channel port type.
2237 FCT_NVME_INITIATOR = 0x10,
2238 FCT_NVME_TARGET = 0x20,
2239 FCT_NVME_DISCOVERY = 0x40,
2243 enum qla_sess_deletion {
2244 QLA_SESS_DELETION_NONE = 0,
2245 QLA_SESS_DELETION_IN_PROGRESS,
2249 enum qlt_plogi_link_t {
2250 QLT_PLOGI_LINK_SAME_WWN,
2251 QLT_PLOGI_LINK_CONFLICT,
2255 struct qlt_plogi_ack_t {
2256 struct list_head list;
2257 struct imm_ntfy_from_isp iocb;
2263 struct ct_sns_desc {
2264 struct ct_sns_pkt *ct_sns;
2265 dma_addr_t ct_sns_dma;
2268 enum discovery_state {
2281 enum login_state { /* FW control Target side */
2282 DSC_LS_LLIOCB_SENT = 2,
2287 DSC_LS_PORT_UNAVAIL,
2288 DSC_LS_PRLO_PEND = 9,
2292 enum fcport_mgt_event {
2295 FCME_PLOGI_DONE, /* Initiator side sent LLIOCB */
2305 FCME_ELS_PLOGI_DONE,
2308 enum rscn_addr_format {
2316 * Fibre channel port structure.
2318 typedef struct fc_port {
2319 struct list_head list;
2320 struct scsi_qla_host *vha;
2322 uint8_t node_name[WWN_SIZE];
2323 uint8_t port_name[WWN_SIZE];
2326 uint16_t old_loop_id;
2328 unsigned int conf_compl_supported:1;
2329 unsigned int deleted:2;
2330 unsigned int free_pending:1;
2331 unsigned int local:1;
2332 unsigned int logout_on_delete:1;
2333 unsigned int logo_ack_needed:1;
2334 unsigned int keep_nport_handle:1;
2335 unsigned int send_els_logo:1;
2336 unsigned int login_pause:1;
2337 unsigned int login_succ:1;
2338 unsigned int query:1;
2339 unsigned int id_changed:1;
2340 unsigned int scan_needed:1;
2342 struct completion nvme_del_done;
2343 uint32_t nvme_prli_service_param;
2344 #define NVME_PRLI_SP_CONF BIT_7
2345 #define NVME_PRLI_SP_INITIATOR BIT_5
2346 #define NVME_PRLI_SP_TARGET BIT_4
2347 #define NVME_PRLI_SP_DISCOVERY BIT_3
2348 #define NVME_PRLI_SP_FIRST_BURST BIT_0
2350 uint32_t nvme_first_burst_size;
2351 #define NVME_FLAG_REGISTERED 4
2352 #define NVME_FLAG_DELETING 2
2353 #define NVME_FLAG_RESETTING 1
2355 struct fc_port *conflict;
2356 unsigned char logout_completed;
2359 struct se_session *se_sess;
2360 struct kref sess_kref;
2361 struct qla_tgt *tgt;
2362 unsigned long expires;
2363 struct list_head del_list_entry;
2364 struct work_struct free_work;
2365 struct work_struct reg_work;
2366 uint64_t jiffies_at_registration;
2367 struct qlt_plogi_ack_t *plogi_link[QLT_PLOGI_LINK_MAX];
2370 uint16_t old_tgt_id;
2371 uint16_t sec_since_registration;
2375 uint8_t fabric_port_name[WWN_SIZE];
2378 fc_port_type_t port_type;
2385 struct fc_rport *rport, *drport;
2386 u32 supported_classes;
2393 unsigned long last_queue_full;
2394 unsigned long last_ramp_up;
2398 struct nvme_fc_remote_port *nvme_remote_port;
2400 unsigned long retry_delay_timestamp;
2401 struct qla_tgt_sess *tgt_session;
2402 struct ct_sns_desc ct_desc;
2403 enum discovery_state disc_state;
2404 enum discovery_state next_disc_state;
2405 enum login_state fw_login_state;
2406 unsigned long dm_login_expire;
2407 unsigned long plogi_nack_done_deadline;
2409 u32 login_gen, last_login_gen;
2410 u32 rscn_gen, last_rscn_gen;
2412 struct list_head gnl_entry;
2413 struct work_struct del_work;
2415 u8 current_login_state;
2416 u8 last_login_state;
2417 u16 n2n_link_reset_cnt;
2421 #define QLA_FCPORT_SCAN 1
2422 #define QLA_FCPORT_FOUND 2
2425 enum fcport_mgt_event event;
2430 u8 port_name[WWN_SIZE];
2437 * Fibre channel port/lun states.
2439 #define FCS_UNCONFIGURED 1
2440 #define FCS_DEVICE_DEAD 2
2441 #define FCS_DEVICE_LOST 3
2442 #define FCS_ONLINE 4
2444 extern const char *const port_state_str[5];
2449 #define FCF_FABRIC_DEVICE BIT_0
2450 #define FCF_LOGIN_NEEDED BIT_1
2451 #define FCF_FCP2_DEVICE BIT_2
2452 #define FCF_ASYNC_SENT BIT_3
2453 #define FCF_CONF_COMP_SUPPORTED BIT_4
2454 #define FCF_ASYNC_ACTIVE BIT_5
2456 /* No loop ID flag. */
2457 #define FC_NO_LOOP_ID 0x1000
2462 * NOTE: All structures are big-endian in form.
2465 #define CT_REJECT_RESPONSE 0x8001
2466 #define CT_ACCEPT_RESPONSE 0x8002
2467 #define CT_REASON_INVALID_COMMAND_CODE 0x01
2468 #define CT_REASON_CANNOT_PERFORM 0x09
2469 #define CT_REASON_COMMAND_UNSUPPORTED 0x0b
2470 #define CT_EXPL_ALREADY_REGISTERED 0x10
2471 #define CT_EXPL_HBA_ATTR_NOT_REGISTERED 0x11
2472 #define CT_EXPL_MULTIPLE_HBA_ATTR 0x12
2473 #define CT_EXPL_INVALID_HBA_BLOCK_LENGTH 0x13
2474 #define CT_EXPL_MISSING_REQ_HBA_ATTR 0x14
2475 #define CT_EXPL_PORT_NOT_REGISTERED_ 0x15
2476 #define CT_EXPL_MISSING_HBA_ID_PORT_LIST 0x16
2477 #define CT_EXPL_HBA_NOT_REGISTERED 0x17
2478 #define CT_EXPL_PORT_ATTR_NOT_REGISTERED 0x20
2479 #define CT_EXPL_PORT_NOT_REGISTERED 0x21
2480 #define CT_EXPL_MULTIPLE_PORT_ATTR 0x22
2481 #define CT_EXPL_INVALID_PORT_BLOCK_LENGTH 0x23
2483 #define NS_N_PORT_TYPE 0x01
2484 #define NS_NL_PORT_TYPE 0x02
2485 #define NS_NX_PORT_TYPE 0x7F
2487 #define GA_NXT_CMD 0x100
2488 #define GA_NXT_REQ_SIZE (16 + 4)
2489 #define GA_NXT_RSP_SIZE (16 + 620)
2491 #define GPN_FT_CMD 0x172
2492 #define GPN_FT_REQ_SIZE (16 + 4)
2493 #define GNN_FT_CMD 0x173
2494 #define GNN_FT_REQ_SIZE (16 + 4)
2496 #define GID_PT_CMD 0x1A1
2497 #define GID_PT_REQ_SIZE (16 + 4)
2499 #define GPN_ID_CMD 0x112
2500 #define GPN_ID_REQ_SIZE (16 + 4)
2501 #define GPN_ID_RSP_SIZE (16 + 8)
2503 #define GNN_ID_CMD 0x113
2504 #define GNN_ID_REQ_SIZE (16 + 4)
2505 #define GNN_ID_RSP_SIZE (16 + 8)
2507 #define GFT_ID_CMD 0x117
2508 #define GFT_ID_REQ_SIZE (16 + 4)
2509 #define GFT_ID_RSP_SIZE (16 + 32)
2511 #define GID_PN_CMD 0x121
2512 #define GID_PN_REQ_SIZE (16 + 8)
2513 #define GID_PN_RSP_SIZE (16 + 4)
2515 #define RFT_ID_CMD 0x217
2516 #define RFT_ID_REQ_SIZE (16 + 4 + 32)
2517 #define RFT_ID_RSP_SIZE 16
2519 #define RFF_ID_CMD 0x21F
2520 #define RFF_ID_REQ_SIZE (16 + 4 + 2 + 1 + 1)
2521 #define RFF_ID_RSP_SIZE 16
2523 #define RNN_ID_CMD 0x213
2524 #define RNN_ID_REQ_SIZE (16 + 4 + 8)
2525 #define RNN_ID_RSP_SIZE 16
2527 #define RSNN_NN_CMD 0x239
2528 #define RSNN_NN_REQ_SIZE (16 + 8 + 1 + 255)
2529 #define RSNN_NN_RSP_SIZE 16
2531 #define GFPN_ID_CMD 0x11C
2532 #define GFPN_ID_REQ_SIZE (16 + 4)
2533 #define GFPN_ID_RSP_SIZE (16 + 8)
2535 #define GPSC_CMD 0x127
2536 #define GPSC_REQ_SIZE (16 + 8)
2537 #define GPSC_RSP_SIZE (16 + 2 + 2)
2539 #define GFF_ID_CMD 0x011F
2540 #define GFF_ID_REQ_SIZE (16 + 4)
2541 #define GFF_ID_RSP_SIZE (16 + 128)
2544 * HBA attribute types.
2546 #define FDMI_HBA_ATTR_COUNT 9
2547 #define FDMIV2_HBA_ATTR_COUNT 17
2548 #define FDMI_HBA_NODE_NAME 0x1
2549 #define FDMI_HBA_MANUFACTURER 0x2
2550 #define FDMI_HBA_SERIAL_NUMBER 0x3
2551 #define FDMI_HBA_MODEL 0x4
2552 #define FDMI_HBA_MODEL_DESCRIPTION 0x5
2553 #define FDMI_HBA_HARDWARE_VERSION 0x6
2554 #define FDMI_HBA_DRIVER_VERSION 0x7
2555 #define FDMI_HBA_OPTION_ROM_VERSION 0x8
2556 #define FDMI_HBA_FIRMWARE_VERSION 0x9
2557 #define FDMI_HBA_OS_NAME_AND_VERSION 0xa
2558 #define FDMI_HBA_MAXIMUM_CT_PAYLOAD_LENGTH 0xb
2559 #define FDMI_HBA_NODE_SYMBOLIC_NAME 0xc
2560 #define FDMI_HBA_VENDOR_ID 0xd
2561 #define FDMI_HBA_NUM_PORTS 0xe
2562 #define FDMI_HBA_FABRIC_NAME 0xf
2563 #define FDMI_HBA_BOOT_BIOS_NAME 0x10
2564 #define FDMI_HBA_TYPE_VENDOR_IDENTIFIER 0xe0
2566 struct ct_fdmi_hba_attr {
2570 uint8_t node_name[WWN_SIZE];
2571 uint8_t manufacturer[64];
2572 uint8_t serial_num[32];
2573 uint8_t model[16+1];
2574 uint8_t model_desc[80];
2575 uint8_t hw_version[32];
2576 uint8_t driver_version[32];
2577 uint8_t orom_version[16];
2578 uint8_t fw_version[32];
2579 uint8_t os_version[128];
2580 uint32_t max_ct_len;
2584 struct ct_fdmi_hba_attributes {
2586 struct ct_fdmi_hba_attr entry[FDMI_HBA_ATTR_COUNT];
2589 struct ct_fdmiv2_hba_attr {
2593 uint8_t node_name[WWN_SIZE];
2594 uint8_t manufacturer[64];
2595 uint8_t serial_num[32];
2596 uint8_t model[16+1];
2597 uint8_t model_desc[80];
2598 uint8_t hw_version[16];
2599 uint8_t driver_version[32];
2600 uint8_t orom_version[16];
2601 uint8_t fw_version[32];
2602 uint8_t os_version[128];
2603 uint32_t max_ct_len;
2604 uint8_t sym_name[256];
2607 uint8_t fabric_name[WWN_SIZE];
2608 uint8_t bios_name[32];
2609 uint8_t vendor_identifier[8];
2613 struct ct_fdmiv2_hba_attributes {
2615 struct ct_fdmiv2_hba_attr entry[FDMIV2_HBA_ATTR_COUNT];
2619 * Port attribute types.
2621 #define FDMI_PORT_ATTR_COUNT 6
2622 #define FDMIV2_PORT_ATTR_COUNT 16
2623 #define FDMI_PORT_FC4_TYPES 0x1
2624 #define FDMI_PORT_SUPPORT_SPEED 0x2
2625 #define FDMI_PORT_CURRENT_SPEED 0x3
2626 #define FDMI_PORT_MAX_FRAME_SIZE 0x4
2627 #define FDMI_PORT_OS_DEVICE_NAME 0x5
2628 #define FDMI_PORT_HOST_NAME 0x6
2629 #define FDMI_PORT_NODE_NAME 0x7
2630 #define FDMI_PORT_NAME 0x8
2631 #define FDMI_PORT_SYM_NAME 0x9
2632 #define FDMI_PORT_TYPE 0xa
2633 #define FDMI_PORT_SUPP_COS 0xb
2634 #define FDMI_PORT_FABRIC_NAME 0xc
2635 #define FDMI_PORT_FC4_TYPE 0xd
2636 #define FDMI_PORT_STATE 0x101
2637 #define FDMI_PORT_COUNT 0x102
2638 #define FDMI_PORT_ID 0x103
2640 #define FDMI_PORT_SPEED_1GB 0x1
2641 #define FDMI_PORT_SPEED_2GB 0x2
2642 #define FDMI_PORT_SPEED_10GB 0x4
2643 #define FDMI_PORT_SPEED_4GB 0x8
2644 #define FDMI_PORT_SPEED_8GB 0x10
2645 #define FDMI_PORT_SPEED_16GB 0x20
2646 #define FDMI_PORT_SPEED_32GB 0x40
2647 #define FDMI_PORT_SPEED_64GB 0x80
2648 #define FDMI_PORT_SPEED_UNKNOWN 0x8000
2650 #define FC_CLASS_2 0x04
2651 #define FC_CLASS_3 0x08
2652 #define FC_CLASS_2_3 0x0C
2654 struct ct_fdmiv2_port_attr {
2658 uint8_t fc4_types[32];
2661 uint32_t max_frame_size;
2662 uint8_t os_dev_name[32];
2663 uint8_t host_name[256];
2664 uint8_t node_name[WWN_SIZE];
2665 uint8_t port_name[WWN_SIZE];
2666 uint8_t port_sym_name[128];
2668 uint32_t port_supported_cos;
2669 uint8_t fabric_name[WWN_SIZE];
2670 uint8_t port_fc4_type[32];
2671 uint32_t port_state;
2678 * Port Attribute Block.
2680 struct ct_fdmiv2_port_attributes {
2682 struct ct_fdmiv2_port_attr entry[FDMIV2_PORT_ATTR_COUNT];
2685 struct ct_fdmi_port_attr {
2689 uint8_t fc4_types[32];
2692 uint32_t max_frame_size;
2693 uint8_t os_dev_name[32];
2694 uint8_t host_name[256];
2698 struct ct_fdmi_port_attributes {
2700 struct ct_fdmi_port_attr entry[FDMI_PORT_ATTR_COUNT];
2703 /* FDMI definitions. */
2704 #define GRHL_CMD 0x100
2705 #define GHAT_CMD 0x101
2706 #define GRPL_CMD 0x102
2707 #define GPAT_CMD 0x110
2709 #define RHBA_CMD 0x200
2710 #define RHBA_RSP_SIZE 16
2712 #define RHAT_CMD 0x201
2713 #define RPRT_CMD 0x210
2715 #define RPA_CMD 0x211
2716 #define RPA_RSP_SIZE 16
2718 #define DHBA_CMD 0x300
2719 #define DHBA_REQ_SIZE (16 + 8)
2720 #define DHBA_RSP_SIZE 16
2722 #define DHAT_CMD 0x301
2723 #define DPRT_CMD 0x310
2724 #define DPA_CMD 0x311
2726 /* CT command header -- request/response common fields */
2736 /* CT command request */
2738 struct ct_cmd_hdr header;
2740 uint16_t max_rsp_size;
2741 uint8_t fragment_id;
2742 uint8_t reserved[3];
2745 /* GA_NXT, GPN_ID, GNN_ID, GFT_ID, GFPN_ID */
2768 uint8_t fc4_types[32];
2775 uint8_t fc4_feature;
2782 uint8_t node_name[8];
2786 uint8_t node_name[8];
2788 uint8_t sym_node_name[255];
2792 uint8_t hba_identifier[8];
2796 uint8_t hba_identifier[8];
2797 uint32_t entry_count;
2798 uint8_t port_name[8];
2799 struct ct_fdmi_hba_attributes attrs;
2803 uint8_t hba_identifier[8];
2804 uint32_t entry_count;
2805 uint8_t port_name[8];
2806 struct ct_fdmiv2_hba_attributes attrs;
2810 uint8_t hba_identifier[8];
2811 struct ct_fdmi_hba_attributes attrs;
2815 uint8_t port_name[8];
2816 struct ct_fdmi_port_attributes attrs;
2820 uint8_t port_name[8];
2821 struct ct_fdmiv2_port_attributes attrs;
2825 uint8_t port_name[8];
2829 uint8_t port_name[8];
2833 uint8_t port_name[8];
2837 uint8_t port_name[8];
2841 uint8_t port_name[8];
2850 uint8_t port_name[8];
2855 /* CT command response header */
2857 struct ct_cmd_hdr header;
2860 uint8_t fragment_id;
2861 uint8_t reason_code;
2862 uint8_t explanation_code;
2863 uint8_t vendor_unique;
2866 struct ct_sns_gid_pt_data {
2867 uint8_t control_byte;
2871 /* It's the same for both GPN_FT and GNN_FT */
2872 struct ct_sns_gpnft_rsp {
2874 struct ct_cmd_hdr header;
2877 uint8_t fragment_id;
2878 uint8_t reason_code;
2879 uint8_t explanation_code;
2880 uint8_t vendor_unique;
2882 /* Assume the largest number of targets for the union */
2883 struct ct_sns_gpn_ft_data {
2891 /* CT command response */
2893 struct ct_rsp_hdr header;
2899 uint8_t port_name[8];
2900 uint8_t sym_port_name_len;
2901 uint8_t sym_port_name[255];
2902 uint8_t node_name[8];
2903 uint8_t sym_node_name_len;
2904 uint8_t sym_node_name[255];
2905 uint8_t init_proc_assoc[8];
2906 uint8_t node_ip_addr[16];
2907 uint8_t class_of_service[4];
2908 uint8_t fc4_types[32];
2909 uint8_t ip_address[16];
2910 uint8_t fabric_port_name[8];
2912 uint8_t hard_address[3];
2916 /* Assume the largest number of targets for the union */
2917 struct ct_sns_gid_pt_data
2918 entries[MAX_FIBRE_DEVICES_MAX];
2922 uint8_t port_name[8];
2926 uint8_t node_name[8];
2930 uint8_t fc4_types[32];
2934 uint32_t entry_count;
2935 uint8_t port_name[8];
2936 struct ct_fdmi_hba_attributes attrs;
2940 uint8_t port_name[8];
2948 #define GFF_FCP_SCSI_OFFSET 7
2949 #define GFF_NVME_OFFSET 23 /* type = 28h */
2951 uint8_t fc4_features[128];
2962 struct ct_sns_req req;
2963 struct ct_sns_rsp rsp;
2967 struct ct_sns_gpnft_pkt {
2969 struct ct_sns_req req;
2970 struct ct_sns_gpnft_rsp rsp;
2975 SF_SCANNING = BIT_0,
2980 FS_FC4TYPE_FCP = BIT_0,
2981 FS_FC4TYPE_NVME = BIT_1,
2984 struct fab_scan_rp {
2986 enum fc4type_t fc4type;
2992 struct fab_scan_rp *l;
2995 #define MAX_SCAN_RETRIES 5
2996 enum scan_flags_t scan_flags;
2997 struct delayed_work scan_work;
3001 * SNS command structures -- for 2200 compatibility.
3003 #define RFT_ID_SNS_SCMD_LEN 22
3004 #define RFT_ID_SNS_CMD_SIZE 60
3005 #define RFT_ID_SNS_DATA_SIZE 16
3007 #define RNN_ID_SNS_SCMD_LEN 10
3008 #define RNN_ID_SNS_CMD_SIZE 36
3009 #define RNN_ID_SNS_DATA_SIZE 16
3011 #define GA_NXT_SNS_SCMD_LEN 6
3012 #define GA_NXT_SNS_CMD_SIZE 28
3013 #define GA_NXT_SNS_DATA_SIZE (620 + 16)
3015 #define GID_PT_SNS_SCMD_LEN 6
3016 #define GID_PT_SNS_CMD_SIZE 28
3018 * Assume MAX_FIBRE_DEVICES_2100 as these defines are only used with older
3021 #define GID_PT_SNS_DATA_SIZE (MAX_FIBRE_DEVICES_2100 * 4 + 16)
3023 #define GPN_ID_SNS_SCMD_LEN 6
3024 #define GPN_ID_SNS_CMD_SIZE 28
3025 #define GPN_ID_SNS_DATA_SIZE (8 + 16)
3027 #define GNN_ID_SNS_SCMD_LEN 6
3028 #define GNN_ID_SNS_CMD_SIZE 28
3029 #define GNN_ID_SNS_DATA_SIZE (8 + 16)
3031 struct sns_cmd_pkt {
3034 uint16_t buffer_length;
3035 uint16_t reserved_1;
3036 __le64 buffer_address __packed;
3037 uint16_t subcommand_length;
3038 uint16_t reserved_2;
3039 uint16_t subcommand;
3041 uint32_t reserved_3;
3045 uint8_t rft_data[RFT_ID_SNS_DATA_SIZE];
3046 uint8_t rnn_data[RNN_ID_SNS_DATA_SIZE];
3047 uint8_t gan_data[GA_NXT_SNS_DATA_SIZE];
3048 uint8_t gid_data[GID_PT_SNS_DATA_SIZE];
3049 uint8_t gpn_data[GPN_ID_SNS_DATA_SIZE];
3050 uint8_t gnn_data[GNN_ID_SNS_DATA_SIZE];
3057 const struct firmware *fw;
3060 /* Return data from MBC_GET_ID_LIST call. */
3061 struct gid_list_info {
3065 uint8_t loop_id_2100; /* ISP2100/ISP2200 -- 4 bytes. */
3066 uint16_t loop_id; /* ISP23XX -- 6 bytes. */
3067 uint16_t reserved_1; /* ISP24XX -- 8 bytes. */
3071 typedef struct vport_info {
3072 uint8_t port_name[WWN_SIZE];
3073 uint8_t node_name[WWN_SIZE];
3076 unsigned long host_no;
3081 typedef struct vport_params {
3082 uint8_t port_name[WWN_SIZE];
3083 uint8_t node_name[WWN_SIZE];
3085 #define VP_OPTS_RETRY_ENABLE BIT_0
3086 #define VP_OPTS_VP_DISABLE BIT_1
3089 /* NPIV - return codes of VP create and modify */
3090 #define VP_RET_CODE_OK 0
3091 #define VP_RET_CODE_FATAL 1
3092 #define VP_RET_CODE_WRONG_ID 2
3093 #define VP_RET_CODE_WWPN 3
3094 #define VP_RET_CODE_RESOURCES 4
3095 #define VP_RET_CODE_NO_MEM 5
3096 #define VP_RET_CODE_NOT_FOUND 6
3103 struct isp_operations {
3105 int (*pci_config) (struct scsi_qla_host *);
3106 int (*reset_chip)(struct scsi_qla_host *);
3107 int (*chip_diag) (struct scsi_qla_host *);
3108 void (*config_rings) (struct scsi_qla_host *);
3109 int (*reset_adapter)(struct scsi_qla_host *);
3110 int (*nvram_config) (struct scsi_qla_host *);
3111 void (*update_fw_options) (struct scsi_qla_host *);
3112 int (*load_risc) (struct scsi_qla_host *, uint32_t *);
3114 char * (*pci_info_str) (struct scsi_qla_host *, char *);
3115 char * (*fw_version_str)(struct scsi_qla_host *, char *, size_t);
3117 irq_handler_t intr_handler;
3118 void (*enable_intrs) (struct qla_hw_data *);
3119 void (*disable_intrs) (struct qla_hw_data *);
3121 int (*abort_command) (srb_t *);
3122 int (*target_reset) (struct fc_port *, uint64_t, int);
3123 int (*lun_reset) (struct fc_port *, uint64_t, int);
3124 int (*fabric_login) (struct scsi_qla_host *, uint16_t, uint8_t,
3125 uint8_t, uint8_t, uint16_t *, uint8_t);
3126 int (*fabric_logout) (struct scsi_qla_host *, uint16_t, uint8_t,
3129 uint16_t (*calc_req_entries) (uint16_t);
3130 void (*build_iocbs) (srb_t *, cmd_entry_t *, uint16_t);
3131 void *(*prep_ms_iocb) (struct scsi_qla_host *, struct ct_arg *);
3132 void *(*prep_ms_fdmi_iocb) (struct scsi_qla_host *, uint32_t,
3135 uint8_t *(*read_nvram)(struct scsi_qla_host *, void *,
3136 uint32_t, uint32_t);
3137 int (*write_nvram)(struct scsi_qla_host *, void *, uint32_t,
3140 void (*fw_dump) (struct scsi_qla_host *, int);
3142 int (*beacon_on) (struct scsi_qla_host *);
3143 int (*beacon_off) (struct scsi_qla_host *);
3144 void (*beacon_blink) (struct scsi_qla_host *);
3146 void *(*read_optrom)(struct scsi_qla_host *, void *,
3147 uint32_t, uint32_t);
3148 int (*write_optrom)(struct scsi_qla_host *, void *, uint32_t,
3151 int (*get_flash_version) (struct scsi_qla_host *, void *);
3152 int (*start_scsi) (srb_t *);
3153 int (*start_scsi_mq) (srb_t *);
3154 int (*abort_isp) (struct scsi_qla_host *);
3155 int (*iospace_config)(struct qla_hw_data *);
3156 int (*initialize_adapter)(struct scsi_qla_host *);
3159 /* MSI-X Support *************************************************************/
3161 #define QLA_MSIX_CHIP_REV_24XX 3
3162 #define QLA_MSIX_FW_MODE(m) (((m) & (BIT_7|BIT_8|BIT_9)) >> 7)
3163 #define QLA_MSIX_FW_MODE_1(m) (QLA_MSIX_FW_MODE(m) == 1)
3165 #define QLA_BASE_VECTORS 2 /* default + RSP */
3166 #define QLA_MSIX_RSP_Q 0x01
3167 #define QLA_ATIO_VECTOR 0x02
3168 #define QLA_MSIX_QPAIR_MULTIQ_RSP_Q 0x03
3170 #define QLA_MIDX_DEFAULT 0
3171 #define QLA_MIDX_RSP_Q 1
3172 #define QLA_PCI_MSIX_CONTROL 0xa2
3173 #define QLA_83XX_PCI_MSIX_CONTROL 0x92
3175 struct scsi_qla_host;
3178 #define QLA83XX_RSPQ_MSIX_ENTRY_NUMBER 1 /* refer to qla83xx_msix_entries */
3180 struct qla_msix_entry {
3190 #define WATCH_INTERVAL 1 /* number of seconds */
3193 enum qla_work_type {
3196 QLA_EVT_ASYNC_LOGIN,
3197 QLA_EVT_ASYNC_LOGOUT,
3198 QLA_EVT_ASYNC_LOGOUT_DONE,
3199 QLA_EVT_ASYNC_ADISC,
3212 QLA_EVT_ASYNC_PRLO_DONE,
3224 struct qla_work_evt {
3225 struct list_head list;
3226 enum qla_work_type type;
3228 #define QLA_EVT_FLAG_FREE 0x1
3232 enum fc_host_event_code code;
3236 #define QLA_IDC_ACK_REGS 7
3237 uint16_t mb[QLA_IDC_ACK_REGS];
3240 struct fc_port *fcport;
3241 #define QLA_LOGIO_LOGIN_RETRIED BIT_0
3246 #define QLA_UEVENT_CODE_FW_DUMP 0
3266 struct { /*Get PDB, Get Speed, update fcport, gnl, gidpn */
3282 struct qla_chip_state_84xx {
3283 struct list_head list;
3287 spinlock_t access_lock;
3288 struct mutex fw_update_mutex;
3290 uint32_t op_fw_version;
3291 uint32_t op_fw_size;
3292 uint32_t op_fw_seq_size;
3293 uint32_t diag_fw_version;
3294 uint32_t gold_fw_version;
3297 struct qla_dif_statistics {
3298 uint64_t dif_input_bytes;
3299 uint64_t dif_output_bytes;
3300 uint64_t dif_input_requests;
3301 uint64_t dif_output_requests;
3302 uint32_t dif_guard_err;
3303 uint32_t dif_ref_tag_err;
3304 uint32_t dif_app_tag_err;
3307 struct qla_statistics {
3308 uint32_t total_isp_aborts;
3309 uint64_t input_bytes;
3310 uint64_t output_bytes;
3311 uint64_t input_requests;
3312 uint64_t output_requests;
3313 uint32_t control_requests;
3315 uint64_t jiffies_at_last_reset;
3316 uint32_t stat_max_pend_cmds;
3317 uint32_t stat_max_qfull_cmds_alloc;
3318 uint32_t stat_max_qfull_cmds_dropped;
3320 struct qla_dif_statistics qla_dif_stats;
3323 struct bidi_statistics {
3324 unsigned long long io_count;
3325 unsigned long long transfer_bytes;
3328 struct qla_tc_param {
3329 struct scsi_qla_host *vha;
3332 struct scatterlist *sg;
3333 struct scatterlist *prot_sg;
3334 struct crc_context *ctx;
3335 uint8_t *ctx_dsd_alloced;
3338 /* Multi queue support */
3339 #define MBC_INITIALIZE_MULTIQ 0x1f
3340 #define QLA_QUE_PAGE 0X1000
3341 #define QLA_MQ_SIZE 32
3342 #define QLA_MAX_QUEUES 256
3343 #define ISP_QUE_REG(ha, id) \
3344 ((ha->mqenable || IS_QLA83XX(ha) || \
3345 IS_QLA27XX(ha) || IS_QLA28XX(ha)) ? \
3346 ((void __iomem *)ha->mqiobase + (QLA_QUE_PAGE * id)) :\
3347 ((void __iomem *)ha->iobase))
3348 #define QLA_REQ_QUE_ID(tag) \
3349 ((tag < QLA_MAX_QUEUES && tag > 0) ? tag : 0)
3350 #define QLA_DEFAULT_QUE_QOS 5
3351 #define QLA_PRECONFIG_VPORTS 32
3352 #define QLA_MAX_VPORTS_QLA24XX 128
3353 #define QLA_MAX_VPORTS_QLA25XX 256
3355 struct qla_tgt_counters {
3356 uint64_t qla_core_sbt_cmd;
3357 uint64_t core_qla_que_buf;
3358 uint64_t qla_core_ret_ctio;
3359 uint64_t core_qla_snd_status;
3360 uint64_t qla_core_ret_sta_ctio;
3361 uint64_t core_qla_free_cmd;
3362 uint64_t num_q_full_sent;
3363 uint64_t num_alloc_iocb_failed;
3364 uint64_t num_term_xchg_sent;
3369 /* Response queue data structure */
3373 response_t *ring_ptr;
3374 uint32_t __iomem *rsp_q_in; /* FWI2-capable only. */
3375 uint32_t __iomem *rsp_q_out;
3376 uint16_t ring_index;
3378 uint16_t *in_ptr; /* queue shadow in index */
3384 struct qla_hw_data *hw;
3385 struct qla_msix_entry *msix;
3386 struct req_que *req;
3387 srb_t *status_srb; /* status continuation entry */
3388 struct qla_qpair *qpair;
3390 dma_addr_t dma_fx00;
3391 response_t *ring_fx00;
3392 uint16_t length_fx00;
3393 uint8_t rsp_pkt[REQUEST_ENTRY_SIZE];
3396 /* Request queue data structure */
3400 request_t *ring_ptr;
3401 uint32_t __iomem *req_q_in; /* FWI2-capable only. */
3402 uint32_t __iomem *req_q_out;
3403 uint16_t ring_index;
3405 uint16_t *out_ptr; /* queue shadow out index */
3413 struct rsp_que *rsp;
3414 srb_t **outstanding_cmds;
3415 uint32_t current_outstanding_cmd;
3416 uint16_t num_outstanding_cmds;
3419 dma_addr_t dma_fx00;
3420 request_t *ring_fx00;
3421 uint16_t length_fx00;
3422 uint8_t req_pkt[REQUEST_ENTRY_SIZE];
3425 /*Queue pair data structure */
3431 * For qpair 0, qp_lock_ptr will point at hardware_lock due to
3432 * legacy code. For other Qpair(s), it will point at qp_lock.
3434 spinlock_t *qp_lock_ptr;
3435 struct scsi_qla_host *vha;
3438 /* distill these fields down to 'online=0/1'
3439 * ha->flags.eeh_busy
3440 * ha->flags.pci_channel_io_perm_failure
3441 * base_vha->loop_state
3444 /* move vha->flags.difdix_supported here */
3445 uint32_t difdix_supported:1;
3446 uint32_t delete_in_progress:1;
3447 uint32_t fw_started:1;
3448 uint32_t enable_class_2:1;
3449 uint32_t enable_explicit_conf:1;
3450 uint32_t use_shadow_reg:1;
3452 uint16_t id; /* qp number used with FW */
3453 uint16_t vp_idx; /* vport ID */
3454 mempool_t *srb_mempool;
3456 struct pci_dev *pdev;
3457 void (*reqq_start_iocbs)(struct qla_qpair *);
3459 /* to do: New driver: move queues to here instead of pointers */
3460 struct req_que *req;
3461 struct rsp_que *rsp;
3462 struct atio_que *atio;
3463 struct qla_msix_entry *msix; /* point to &ha->msix_entries[x] */
3464 struct qla_hw_data *hw;
3465 struct work_struct q_work;
3466 struct list_head qp_list_elem; /* vha->qp_list */
3467 struct list_head hints_list;
3469 uint16_t retry_term_cnt;
3470 uint32_t retry_term_exchg_addr;
3471 uint64_t retry_term_jiff;
3472 struct qla_tgt_counters tgt_counters;
3475 /* Place holder for FW buffer parameters */
3482 struct scsi_qlt_host {
3483 void *target_lport_ptr;
3484 struct mutex tgt_mutex;
3485 struct mutex tgt_host_action_mutex;
3486 struct qla_tgt *qla_tgt;
3489 struct qlt_hw_data {
3490 /* Protected by hw lock */
3491 uint32_t node_name_set:1;
3493 dma_addr_t atio_dma; /* Physical address. */
3494 struct atio *atio_ring; /* Base virtual address */
3495 struct atio *atio_ring_ptr; /* Current address. */
3496 uint16_t atio_ring_index; /* Current index. */
3497 uint16_t atio_q_length;
3498 uint32_t __iomem *atio_q_in;
3499 uint32_t __iomem *atio_q_out;
3501 struct qla_tgt_func_tmpl *tgt_ops;
3502 struct qla_tgt_vp_map *tgt_vp_map;
3505 uint16_t saved_exchange_count;
3506 uint32_t saved_firmware_options_1;
3507 uint32_t saved_firmware_options_2;
3508 uint32_t saved_firmware_options_3;
3509 uint8_t saved_firmware_options[2];
3510 uint8_t saved_add_firmware_options[2];
3512 uint8_t tgt_node_name[WWN_SIZE];
3514 struct dentry *dfs_tgt_sess;
3515 struct dentry *dfs_tgt_port_database;
3516 struct dentry *dfs_naqp;
3518 struct list_head q_full_list;
3519 uint32_t num_pend_cmds;
3520 uint32_t num_qfull_cmds_alloc;
3521 uint32_t num_qfull_cmds_dropped;
3522 spinlock_t q_full_lock;
3523 uint32_t leak_exchg_thresh_hold;
3524 spinlock_t sess_lock;
3526 #define DEFAULT_NAQP 2
3527 spinlock_t atio_lock ____cacheline_aligned;
3528 struct btree_head32 host_map;
3531 #define MAX_QFULL_CMDS_ALLOC 8192
3532 #define Q_FULL_THRESH_HOLD_PERCENT 90
3533 #define Q_FULL_THRESH_HOLD(ha) \
3534 ((ha->cur_fw_xcb_count/100) * Q_FULL_THRESH_HOLD_PERCENT)
3536 #define LEAK_EXCHG_THRESH_HOLD_PERCENT 75 /* 75 percent */
3539 * Qlogic host adapter specific data structure.
3541 struct qla_hw_data {
3542 struct pci_dev *pdev;
3544 #define SRB_MIN_REQ 128
3545 mempool_t *srb_mempool;
3548 uint32_t mbox_int :1;
3549 uint32_t mbox_busy :1;
3550 uint32_t disable_risc_code_load :1;
3551 uint32_t enable_64bit_addressing :1;
3552 uint32_t enable_lip_reset :1;
3553 uint32_t enable_target_reset :1;
3554 uint32_t enable_lip_full_login :1;
3555 uint32_t enable_led_scheme :1;
3557 uint32_t msi_enabled :1;
3558 uint32_t msix_enabled :1;
3559 uint32_t disable_serdes :1;
3560 uint32_t gpsc_supported :1;
3561 uint32_t npiv_supported :1;
3562 uint32_t pci_channel_io_perm_failure :1;
3563 uint32_t fce_enabled :1;
3564 uint32_t fac_supported :1;
3566 uint32_t chip_reset_done :1;
3567 uint32_t running_gold_fw :1;
3568 uint32_t eeh_busy :1;
3569 uint32_t disable_msix_handshake :1;
3570 uint32_t fcp_prio_enabled :1;
3571 uint32_t isp82xx_fw_hung:1;
3572 uint32_t nic_core_hung:1;
3574 uint32_t quiesce_owner:1;
3575 uint32_t nic_core_reset_hdlr_active:1;
3576 uint32_t nic_core_reset_owner:1;
3577 uint32_t isp82xx_no_md_cap:1;
3578 uint32_t host_shutting_down:1;
3579 uint32_t idc_compl_status:1;
3580 uint32_t mr_reset_hdlr_active:1;
3581 uint32_t mr_intr_valid:1;
3583 uint32_t dport_enabled:1;
3584 uint32_t fawwpn_enabled:1;
3585 uint32_t exlogins_enabled:1;
3586 uint32_t exchoffld_enabled:1;
3590 uint32_t fw_started:1;
3591 uint32_t fw_init_done:1;
3593 uint32_t detected_lr_sfp:1;
3594 uint32_t using_lr_setting:1;
3595 uint32_t rida_fmt2:1;
3596 uint32_t purge_mbox:1;
3597 uint32_t n2n_bigger:1;
3598 uint32_t secure_adapter:1;
3599 uint32_t secure_fw:1;
3603 uint16_t long_range_distance; /* 32G & above */
3604 #define LR_DISTANCE_5K 1
3605 #define LR_DISTANCE_10K 0
3607 /* This spinlock is used to protect "io transactions", you must
3608 * acquire it before doing any IO to the card, eg with RD_REG*() and
3609 * WRT_REG*() for the duration of your entire commandtransaction.
3611 * This spinlock is of lower priority than the io request lock.
3614 spinlock_t hardware_lock ____cacheline_aligned;
3617 device_reg_t *iobase; /* Base I/O address */
3618 resource_size_t pio_address;
3620 #define MIN_IOBASE_LEN 0x100
3621 dma_addr_t bar0_hdl;
3623 void __iomem *cregbase;
3624 dma_addr_t bar2_hdl;
3625 #define BAR0_LEN_FX00 (1024 * 1024)
3626 #define BAR2_LEN_FX00 (128 * 1024)
3628 uint32_t rqstq_intr_code;
3629 uint32_t mbx_intr_code;
3630 uint32_t req_que_len;
3631 uint32_t rsp_que_len;
3632 uint32_t req_que_off;
3633 uint32_t rsp_que_off;
3635 /* Multi queue data structs */
3636 device_reg_t *mqiobase;
3637 device_reg_t *msixbase;
3638 uint16_t msix_count;
3640 struct req_que **req_q_map;
3641 struct rsp_que **rsp_q_map;
3642 struct qla_qpair **queue_pair_map;
3643 unsigned long req_qid_map[(QLA_MAX_QUEUES / 8) / sizeof(unsigned long)];
3644 unsigned long rsp_qid_map[(QLA_MAX_QUEUES / 8) / sizeof(unsigned long)];
3645 unsigned long qpair_qid_map[(QLA_MAX_QUEUES / 8)
3646 / sizeof(unsigned long)];
3647 uint8_t max_req_queues;
3648 uint8_t max_rsp_queues;
3651 struct qla_qpair *base_qpair;
3652 struct qla_npiv_entry *npiv_info;
3653 uint16_t nvram_npiv_size;
3655 uint16_t switch_cap;
3656 #define FLOGI_SEQ_DEL BIT_8
3657 #define FLOGI_MID_SUPPORT BIT_10
3658 #define FLOGI_VSAN_SUPPORT BIT_12
3659 #define FLOGI_SP_SUPPORT BIT_13
3661 uint8_t port_no; /* Physical port of adapter */
3662 uint8_t exch_starvation;
3664 /* Timeout timers. */
3665 uint8_t loop_down_abort_time; /* port down timer */
3666 atomic_t loop_down_timer; /* loop down timer */
3667 uint8_t link_down_timeout; /* link down timeout */
3668 uint16_t max_loop_id;
3669 uint16_t max_fibre_devices; /* Maximum number of targets */
3672 uint16_t min_external_loopid; /* First external loop Id */
3674 #define PORT_SPEED_UNKNOWN 0xFFFF
3675 #define PORT_SPEED_1GB 0x00
3676 #define PORT_SPEED_2GB 0x01
3677 #define PORT_SPEED_AUTO 0x02
3678 #define PORT_SPEED_4GB 0x03
3679 #define PORT_SPEED_8GB 0x04
3680 #define PORT_SPEED_16GB 0x05
3681 #define PORT_SPEED_32GB 0x06
3682 #define PORT_SPEED_64GB 0x07
3683 #define PORT_SPEED_10GB 0x13
3684 uint16_t link_data_rate; /* F/W operating speed */
3685 uint16_t set_data_rate; /* Set by user */
3687 uint8_t current_topology;
3688 uint8_t prev_topology;
3689 #define ISP_CFG_NL 1
3691 #define ISP_CFG_FL 4
3694 uint8_t operating_mode; /* F/W operating mode */
3699 uint8_t interrupts_on;
3700 uint32_t isp_abort_cnt;
3701 #define PCI_DEVICE_ID_QLOGIC_ISP2532 0x2532
3702 #define PCI_DEVICE_ID_QLOGIC_ISP8432 0x8432
3703 #define PCI_DEVICE_ID_QLOGIC_ISP8001 0x8001
3704 #define PCI_DEVICE_ID_QLOGIC_ISP8031 0x8031
3705 #define PCI_DEVICE_ID_QLOGIC_ISP2031 0x2031
3706 #define PCI_DEVICE_ID_QLOGIC_ISP2071 0x2071
3707 #define PCI_DEVICE_ID_QLOGIC_ISP2271 0x2271
3708 #define PCI_DEVICE_ID_QLOGIC_ISP2261 0x2261
3709 #define PCI_DEVICE_ID_QLOGIC_ISP2061 0x2061
3710 #define PCI_DEVICE_ID_QLOGIC_ISP2081 0x2081
3711 #define PCI_DEVICE_ID_QLOGIC_ISP2089 0x2089
3712 #define PCI_DEVICE_ID_QLOGIC_ISP2281 0x2281
3713 #define PCI_DEVICE_ID_QLOGIC_ISP2289 0x2289
3716 #define DT_ISP2100 BIT_0
3717 #define DT_ISP2200 BIT_1
3718 #define DT_ISP2300 BIT_2
3719 #define DT_ISP2312 BIT_3
3720 #define DT_ISP2322 BIT_4
3721 #define DT_ISP6312 BIT_5
3722 #define DT_ISP6322 BIT_6
3723 #define DT_ISP2422 BIT_7
3724 #define DT_ISP2432 BIT_8
3725 #define DT_ISP5422 BIT_9
3726 #define DT_ISP5432 BIT_10
3727 #define DT_ISP2532 BIT_11
3728 #define DT_ISP8432 BIT_12
3729 #define DT_ISP8001 BIT_13
3730 #define DT_ISP8021 BIT_14
3731 #define DT_ISP2031 BIT_15
3732 #define DT_ISP8031 BIT_16
3733 #define DT_ISPFX00 BIT_17
3734 #define DT_ISP8044 BIT_18
3735 #define DT_ISP2071 BIT_19
3736 #define DT_ISP2271 BIT_20
3737 #define DT_ISP2261 BIT_21
3738 #define DT_ISP2061 BIT_22
3739 #define DT_ISP2081 BIT_23
3740 #define DT_ISP2089 BIT_24
3741 #define DT_ISP2281 BIT_25
3742 #define DT_ISP2289 BIT_26
3743 #define DT_ISP_LAST (DT_ISP2289 << 1)
3745 uint32_t device_type;
3746 #define DT_T10_PI BIT_25
3747 #define DT_IIDMA BIT_26
3748 #define DT_FWI2 BIT_27
3749 #define DT_ZIO_SUPPORTED BIT_28
3750 #define DT_OEM_001 BIT_29
3751 #define DT_ISP2200A BIT_30
3752 #define DT_EXTENDED_IDS BIT_31
3754 #define DT_MASK(ha) ((ha)->isp_type & (DT_ISP_LAST - 1))
3755 #define IS_QLA2100(ha) (DT_MASK(ha) & DT_ISP2100)
3756 #define IS_QLA2200(ha) (DT_MASK(ha) & DT_ISP2200)
3757 #define IS_QLA2300(ha) (DT_MASK(ha) & DT_ISP2300)
3758 #define IS_QLA2312(ha) (DT_MASK(ha) & DT_ISP2312)
3759 #define IS_QLA2322(ha) (DT_MASK(ha) & DT_ISP2322)
3760 #define IS_QLA6312(ha) (DT_MASK(ha) & DT_ISP6312)
3761 #define IS_QLA6322(ha) (DT_MASK(ha) & DT_ISP6322)
3762 #define IS_QLA2422(ha) (DT_MASK(ha) & DT_ISP2422)
3763 #define IS_QLA2432(ha) (DT_MASK(ha) & DT_ISP2432)
3764 #define IS_QLA5422(ha) (DT_MASK(ha) & DT_ISP5422)
3765 #define IS_QLA5432(ha) (DT_MASK(ha) & DT_ISP5432)
3766 #define IS_QLA2532(ha) (DT_MASK(ha) & DT_ISP2532)
3767 #define IS_QLA8432(ha) (DT_MASK(ha) & DT_ISP8432)
3768 #define IS_QLA8001(ha) (DT_MASK(ha) & DT_ISP8001)
3769 #define IS_QLA81XX(ha) (IS_QLA8001(ha))
3770 #define IS_QLA82XX(ha) (DT_MASK(ha) & DT_ISP8021)
3771 #define IS_QLA8044(ha) (DT_MASK(ha) & DT_ISP8044)
3772 #define IS_QLA2031(ha) (DT_MASK(ha) & DT_ISP2031)
3773 #define IS_QLA8031(ha) (DT_MASK(ha) & DT_ISP8031)
3774 #define IS_QLAFX00(ha) (DT_MASK(ha) & DT_ISPFX00)
3775 #define IS_QLA2071(ha) (DT_MASK(ha) & DT_ISP2071)
3776 #define IS_QLA2271(ha) (DT_MASK(ha) & DT_ISP2271)
3777 #define IS_QLA2261(ha) (DT_MASK(ha) & DT_ISP2261)
3778 #define IS_QLA2081(ha) (DT_MASK(ha) & DT_ISP2081)
3779 #define IS_QLA2281(ha) (DT_MASK(ha) & DT_ISP2281)
3781 #define IS_QLA23XX(ha) (IS_QLA2300(ha) || IS_QLA2312(ha) || IS_QLA2322(ha) || \
3782 IS_QLA6312(ha) || IS_QLA6322(ha))
3783 #define IS_QLA24XX(ha) (IS_QLA2422(ha) || IS_QLA2432(ha))
3784 #define IS_QLA54XX(ha) (IS_QLA5422(ha) || IS_QLA5432(ha))
3785 #define IS_QLA25XX(ha) (IS_QLA2532(ha))
3786 #define IS_QLA83XX(ha) (IS_QLA2031(ha) || IS_QLA8031(ha))
3787 #define IS_QLA84XX(ha) (IS_QLA8432(ha))
3788 #define IS_QLA27XX(ha) (IS_QLA2071(ha) || IS_QLA2271(ha) || IS_QLA2261(ha))
3789 #define IS_QLA28XX(ha) (IS_QLA2081(ha) || IS_QLA2281(ha))
3790 #define IS_QLA24XX_TYPE(ha) (IS_QLA24XX(ha) || IS_QLA54XX(ha) || \
3792 #define IS_CNA_CAPABLE(ha) (IS_QLA81XX(ha) || IS_QLA82XX(ha) || \
3793 IS_QLA8031(ha) || IS_QLA8044(ha))
3794 #define IS_P3P_TYPE(ha) (IS_QLA82XX(ha) || IS_QLA8044(ha))
3795 #define IS_QLA2XXX_MIDTYPE(ha) (IS_QLA24XX(ha) || IS_QLA84XX(ha) || \
3796 IS_QLA25XX(ha) || IS_QLA81XX(ha) || \
3797 IS_QLA82XX(ha) || IS_QLA83XX(ha) || \
3798 IS_QLA8044(ha) || IS_QLA27XX(ha) || \
3800 #define IS_MSIX_NACK_CAPABLE(ha) (IS_QLA81XX(ha) || IS_QLA83XX(ha) || \
3801 IS_QLA27XX(ha) || IS_QLA28XX(ha))
3802 #define IS_NOPOLLING_TYPE(ha) (IS_QLA81XX(ha) && (ha)->flags.msix_enabled)
3803 #define IS_FAC_REQUIRED(ha) (IS_QLA81XX(ha) || IS_QLA83XX(ha) || \
3804 IS_QLA27XX(ha) || IS_QLA28XX(ha))
3805 #define IS_NOCACHE_VPD_TYPE(ha) (IS_QLA81XX(ha) || IS_QLA83XX(ha) || \
3806 IS_QLA27XX(ha) || IS_QLA28XX(ha))
3807 #define IS_ALOGIO_CAPABLE(ha) (IS_QLA23XX(ha) || IS_FWI2_CAPABLE(ha))
3809 #define IS_T10_PI_CAPABLE(ha) ((ha)->device_type & DT_T10_PI)
3810 #define IS_IIDMA_CAPABLE(ha) ((ha)->device_type & DT_IIDMA)
3811 #define IS_FWI2_CAPABLE(ha) ((ha)->device_type & DT_FWI2)
3812 #define IS_ZIO_SUPPORTED(ha) ((ha)->device_type & DT_ZIO_SUPPORTED)
3813 #define IS_OEM_001(ha) ((ha)->device_type & DT_OEM_001)
3814 #define HAS_EXTENDED_IDS(ha) ((ha)->device_type & DT_EXTENDED_IDS)
3815 #define IS_CT6_SUPPORTED(ha) ((ha)->device_type & DT_CT6_SUPPORTED)
3816 #define IS_MQUE_CAPABLE(ha) ((ha)->mqenable || IS_QLA83XX(ha) || \
3817 IS_QLA27XX(ha) || IS_QLA28XX(ha))
3818 #define IS_BIDI_CAPABLE(ha) \
3819 (IS_QLA25XX(ha) || IS_QLA2031(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha))
3820 /* Bit 21 of fw_attributes decides the MCTP capabilities */
3821 #define IS_MCTP_CAPABLE(ha) (IS_QLA2031(ha) && \
3822 ((ha)->fw_attributes_ext[0] & BIT_0))
3823 #define IS_PI_UNINIT_CAPABLE(ha) (IS_QLA83XX(ha) || IS_QLA27XX(ha))
3824 #define IS_PI_IPGUARD_CAPABLE(ha) (IS_QLA83XX(ha) || IS_QLA27XX(ha))
3825 #define IS_PI_DIFB_DIX0_CAPABLE(ha) (0)
3826 #define IS_PI_SPLIT_DET_CAPABLE_HBA(ha) (IS_QLA83XX(ha) || IS_QLA27XX(ha) || \
3828 #define IS_PI_SPLIT_DET_CAPABLE(ha) (IS_PI_SPLIT_DET_CAPABLE_HBA(ha) && \
3829 (((ha)->fw_attributes_h << 16 | (ha)->fw_attributes) & BIT_22))
3830 #define IS_ATIO_MSIX_CAPABLE(ha) (IS_QLA83XX(ha) || IS_QLA27XX(ha) || \
3832 #define IS_TGT_MODE_CAPABLE(ha) (ha->tgt.atio_q_length)
3833 #define IS_SHADOW_REG_CAPABLE(ha) (IS_QLA27XX(ha) || IS_QLA28XX(ha))
3834 #define IS_DPORT_CAPABLE(ha) (IS_QLA83XX(ha) || IS_QLA27XX(ha) || \
3836 #define IS_FAWWN_CAPABLE(ha) (IS_QLA83XX(ha) || IS_QLA27XX(ha) || \
3838 #define IS_EXCHG_OFFLD_CAPABLE(ha) \
3839 (IS_QLA81XX(ha) || IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha))
3840 #define IS_EXLOGIN_OFFLD_CAPABLE(ha) \
3841 (IS_QLA25XX(ha) || IS_QLA81XX(ha) || IS_QLA83XX(ha) || \
3842 IS_QLA27XX(ha) || IS_QLA28XX(ha))
3843 #define USE_ASYNC_SCAN(ha) (IS_QLA25XX(ha) || IS_QLA81XX(ha) ||\
3844 IS_QLA83XX(ha) || IS_QLA27XX(ha) || IS_QLA28XX(ha))
3846 /* HBA serial number */
3851 /* NVRAM configuration data */
3852 #define MAX_NVRAM_SIZE 4096
3853 #define VPD_OFFSET MAX_NVRAM_SIZE / 2
3854 uint16_t nvram_size;
3855 uint16_t nvram_base;
3861 uint16_t loop_reset_delay;
3862 uint8_t retry_count;
3863 uint8_t login_timeout;
3865 int port_down_retry_count;
3867 uint8_t aen_mbx_count;
3868 atomic_t num_pend_mbx_stage1;
3869 atomic_t num_pend_mbx_stage2;
3870 atomic_t num_pend_mbx_stage3;
3871 uint16_t frame_payload_size;
3873 uint32_t login_retry_count;
3874 /* SNS command interfaces. */
3875 ms_iocb_entry_t *ms_iocb;
3876 dma_addr_t ms_iocb_dma;
3877 struct ct_sns_pkt *ct_sns;
3878 dma_addr_t ct_sns_dma;
3879 /* SNS command interfaces for 2200. */
3880 struct sns_cmd_pkt *sns_cmd;
3881 dma_addr_t sns_cmd_dma;
3883 #define SFP_DEV_SIZE 512
3884 #define SFP_BLOCK_SIZE 64
3886 dma_addr_t sfp_data_dma;
3891 #define XGMAC_DATA_SIZE 4096
3893 dma_addr_t xgmac_data_dma;
3895 #define DCBX_TLV_DATA_SIZE 4096
3897 dma_addr_t dcbx_tlv_dma;
3899 struct task_struct *dpc_thread;
3900 uint8_t dpc_active; /* DPC routine is active */
3902 dma_addr_t gid_list_dma;
3903 struct gid_list_info *gid_list;
3904 int gid_list_info_size;
3906 /* Small DMA pool allocations -- maximum 256 bytes in length. */
3907 #define DMA_POOL_SIZE 256
3908 struct dma_pool *s_dma_pool;
3910 dma_addr_t init_cb_dma;
3913 dma_addr_t ex_init_cb_dma;
3914 struct ex_init_cb_81xx *ex_init_cb;
3917 dma_addr_t async_pd_dma;
3919 #define ENABLE_EXTENDED_LOGIN BIT_7
3921 /* Extended Logins */
3923 dma_addr_t exlogin_buf_dma;
3926 #define ENABLE_EXCHANGE_OFFLD BIT_2
3928 /* Exchange Offload */
3929 void *exchoffld_buf;
3930 dma_addr_t exchoffld_buf_dma;
3932 int exchoffld_count;
3935 struct els_plogi_payload plogi_els_payld;
3939 /* These are used by mailbox operations. */
3940 uint16_t mailbox_out[MAILBOX_REGISTER_COUNT];
3941 uint32_t mailbox_out32[MAILBOX_REGISTER_COUNT];
3942 uint32_t aenmb[AEN_MAILBOX_REGISTER_COUNT_FX00];
3945 struct mbx_cmd_32 *mcp32;
3947 unsigned long mbx_cmd_flags;
3948 #define MBX_INTERRUPT 1
3949 #define MBX_INTR_WAIT 2
3950 #define MBX_UPDATE_FLASH_ACTIVE 3
3952 struct mutex vport_lock; /* Virtual port synchronization */
3953 spinlock_t vport_slock; /* order is hardware_lock, then vport_slock */
3954 struct mutex mq_lock; /* multi-queue synchronization */
3955 struct completion mbx_cmd_comp; /* Serialize mbx access */
3956 struct completion mbx_intr_comp; /* Used for completion notification */
3957 struct completion dcbx_comp; /* For set port config notification */
3958 struct completion lb_portup_comp; /* Used to wait for link up during
3960 #define DCBX_COMP_TIMEOUT 20
3961 #define LB_PORTUP_COMP_TIMEOUT 10
3963 int notify_dcbx_comp;
3964 int notify_lb_portup_comp;
3965 struct mutex selflogin_lock;
3967 /* Basic firmware related information. */
3968 uint16_t fw_major_version;
3969 uint16_t fw_minor_version;
3970 uint16_t fw_subminor_version;
3971 uint16_t fw_attributes;
3972 uint16_t fw_attributes_h;
3973 #define FW_ATTR_H_NVME_FBURST BIT_1
3974 #define FW_ATTR_H_NVME BIT_10
3975 #define FW_ATTR_H_NVME_UPDATED BIT_14
3977 uint16_t fw_attributes_ext[2];
3978 uint32_t fw_memory_size;
3979 uint32_t fw_transfer_size;
3980 uint32_t fw_srisc_address;
3981 #define RISC_START_ADDRESS_2100 0x1000
3982 #define RISC_START_ADDRESS_2300 0x800
3983 #define RISC_START_ADDRESS_2400 0x100000
3985 uint16_t orig_fw_tgt_xcb_count;
3986 uint16_t cur_fw_tgt_xcb_count;
3987 uint16_t orig_fw_xcb_count;
3988 uint16_t cur_fw_xcb_count;
3989 uint16_t orig_fw_iocb_count;
3990 uint16_t cur_fw_iocb_count;
3991 uint16_t fw_max_fcf_count;
3993 uint32_t fw_shared_ram_start;
3994 uint32_t fw_shared_ram_end;
3995 uint32_t fw_ddr_ram_start;
3996 uint32_t fw_ddr_ram_end;
3998 uint16_t fw_options[16]; /* slots: 1,2,3,10,11 */
3999 uint8_t fw_seriallink_options[4];
4000 uint16_t fw_seriallink_options24[4];
4002 uint8_t serdes_version[3];
4003 uint8_t mpi_version[3];
4004 uint32_t mpi_capabilities;
4005 uint8_t phy_version[3];
4006 uint8_t pep_version[3];
4008 /* Firmware dump template */
4014 struct qla2xxx_fw_dump *fw_dump;
4015 uint32_t fw_dump_len;
4016 u32 fw_dump_alloc_len;
4019 unsigned long fw_dump_cap_flags;
4020 #define RISC_PAUSE_CMPL 0
4021 #define DMA_SHUTDOWN_CMPL 1
4022 #define ISP_RESET_CMPL 2
4023 #define RISC_RDY_AFT_RESET 3
4024 #define RISC_SRAM_DUMP_CMPL 4
4025 #define RISC_EXT_MEM_DUMP_CMPL 5
4026 #define ISP_MBX_RDY 6
4027 #define ISP_SOFT_RESET_CMPL 7
4028 int fw_dump_reading;
4029 int prev_minidump_failed;
4032 /* Current size of mctp dump is 0x086064 bytes */
4033 #define MCTP_DUMP_SIZE 0x086064
4034 dma_addr_t mctp_dump_dma;
4037 int mctp_dump_reading;
4038 uint32_t chain_offset;
4039 struct dentry *dfs_dir;
4040 struct dentry *dfs_fce;
4041 struct dentry *dfs_tgt_counters;
4042 struct dentry *dfs_fw_resource_cnt;
4048 uint64_t fce_wr, fce_rd;
4049 struct mutex fce_mutex;
4052 uint16_t chip_revision;
4054 uint16_t product_id[4];
4056 uint8_t model_number[16+1];
4057 char model_desc[80];
4058 uint8_t adapter_id[16+1];
4060 /* Option ROM information. */
4061 char *optrom_buffer;
4062 uint32_t optrom_size;
4064 #define QLA_SWAITING 0
4065 #define QLA_SREADING 1
4066 #define QLA_SWRITING 2
4067 uint32_t optrom_region_start;
4068 uint32_t optrom_region_size;
4069 struct mutex optrom_mutex;
4071 /* PCI expansion ROM image information. */
4072 #define ROM_CODE_TYPE_BIOS 0
4073 #define ROM_CODE_TYPE_FCODE 1
4074 #define ROM_CODE_TYPE_EFI 3
4075 uint8_t bios_revision[2];
4076 uint8_t efi_revision[2];
4077 uint8_t fcode_revision[16];
4078 uint32_t fw_revision[4];
4080 uint32_t gold_fw_version[4];
4082 /* Offsets for flash/nvram access (set to ~0 if not used). */
4083 uint32_t flash_conf_off;
4084 uint32_t flash_data_off;
4085 uint32_t nvram_conf_off;
4086 uint32_t nvram_data_off;
4088 uint32_t fdt_wrt_disable;
4089 uint32_t fdt_wrt_enable;
4090 uint32_t fdt_erase_cmd;
4091 uint32_t fdt_block_size;
4092 uint32_t fdt_unprotect_sec_cmd;
4093 uint32_t fdt_protect_sec_cmd;
4094 uint32_t fdt_wrt_sts_reg_cmd;
4097 uint32_t flt_region_flt;
4098 uint32_t flt_region_fdt;
4099 uint32_t flt_region_boot;
4100 uint32_t flt_region_boot_sec;
4101 uint32_t flt_region_fw;
4102 uint32_t flt_region_fw_sec;
4103 uint32_t flt_region_vpd_nvram;
4104 uint32_t flt_region_vpd_nvram_sec;
4105 uint32_t flt_region_vpd;
4106 uint32_t flt_region_vpd_sec;
4107 uint32_t flt_region_nvram;
4108 uint32_t flt_region_nvram_sec;
4109 uint32_t flt_region_npiv_conf;
4110 uint32_t flt_region_gold_fw;
4111 uint32_t flt_region_fcp_prio;
4112 uint32_t flt_region_bootload;
4113 uint32_t flt_region_img_status_pri;
4114 uint32_t flt_region_img_status_sec;
4115 uint32_t flt_region_aux_img_status_pri;
4116 uint32_t flt_region_aux_img_status_sec;
4118 uint8_t active_image;
4120 /* Needed for BEACON */
4121 uint16_t beacon_blink_led;
4122 uint8_t beacon_color_state;
4123 #define QLA_LED_GRN_ON 0x01
4124 #define QLA_LED_YLW_ON 0x02
4125 #define QLA_LED_ABR_ON 0x04
4126 #define QLA_LED_ALL_ON 0x07 /* yellow, green, amber. */
4127 /* ISP2322: red, green, amber. */
4131 struct qla_msix_entry *msix_entries;
4133 struct list_head vp_list; /* list of VP */
4134 unsigned long vp_idx_map[(MAX_MULTI_ID_FABRIC / 8) /
4135 sizeof(unsigned long)];
4136 uint16_t num_vhosts; /* number of vports created */
4137 uint16_t num_vsans; /* number of vsan created */
4138 uint16_t max_npiv_vports; /* 63 or 125 per topoloty */
4139 int cur_vport_count;
4141 struct qla_chip_state_84xx *cs84xx;
4142 struct isp_operations *isp_ops;
4143 struct workqueue_struct *wq;
4144 struct qlfc_fw fw_buf;
4146 /* FCP_CMND priority support */
4147 struct qla_fcp_prio_cfg *fcp_prio_cfg;
4149 struct dma_pool *dl_dma_pool;
4150 #define DSD_LIST_DMA_POOL_SIZE 512
4152 struct dma_pool *fcp_cmnd_dma_pool;
4153 mempool_t *ctx_mempool;
4154 #define FCP_CMND_DMA_POOL_SIZE 512
4156 void __iomem *nx_pcibase; /* Base I/O address */
4157 void __iomem *nxdb_rd_ptr; /* Doorbell read pointer */
4158 void __iomem *nxdb_wr_ptr; /* Door bell write pointer */
4161 uint32_t curr_window;
4162 uint32_t ddr_mn_window;
4163 unsigned long mn_win_crb;
4164 unsigned long ms_win_crb;
4166 uint32_t fcoe_dev_init_timeout;
4167 uint32_t fcoe_reset_timeout;
4169 uint16_t portnum; /* port number */
4171 struct fw_blob *hablob;
4172 struct qla82xx_legacy_intr_set nx_legacy_intr;
4174 uint16_t gbl_dsd_inuse;
4175 uint16_t gbl_dsd_avail;
4176 struct list_head gbl_dsd_list;
4177 #define NUM_DSD_CHAIN 4096
4180 __le32 file_prd_off; /* File firmware product offset */
4182 uint32_t md_template_size;
4184 dma_addr_t md_tmplt_hdr_dma;
4186 uint32_t md_dump_size;
4190 /* QLA83XX IDC specific fields */
4191 uint32_t idc_audit_ts;
4192 uint32_t idc_extend_tmo;
4194 /* DPC low-priority workqueue */
4195 struct workqueue_struct *dpc_lp_wq;
4196 struct work_struct idc_aen;
4197 /* DPC high-priority workqueue */
4198 struct workqueue_struct *dpc_hp_wq;
4199 struct work_struct nic_core_reset;
4200 struct work_struct idc_state_handler;
4201 struct work_struct nic_core_unrecoverable;
4202 struct work_struct board_disable;
4204 struct mr_data_fx00 mr;
4205 uint32_t chip_reset;
4207 struct qlt_hw_data tgt;
4208 int allow_cna_fw_dump;
4209 uint32_t fw_ability_mask;
4210 uint16_t min_supported_speed;
4211 uint16_t max_supported_speed;
4213 /* DMA pool for the DIF bundling buffers */
4214 struct dma_pool *dif_bundl_pool;
4215 #define DIF_BUNDLING_DMA_POOL_SIZE 1024
4218 struct list_head head;
4222 struct list_head head;
4227 unsigned long long dif_bundle_crossed_pages;
4228 unsigned long long dif_bundle_reads;
4229 unsigned long long dif_bundle_writes;
4230 unsigned long long dif_bundle_kallocs;
4231 unsigned long long dif_bundle_dma_allocs;
4233 atomic_t nvme_active_aen_cnt;
4234 uint16_t nvme_last_rptd_aen; /* Last recorded aen count */
4236 atomic_t zio_threshold;
4237 uint16_t last_zio_threshold;
4239 #define DEFAULT_ZIO_THRESHOLD 5
4242 struct active_regions {
4245 uint8_t board_config;
4247 uint8_t npiv_config_0_1;
4248 uint8_t npiv_config_2_3;
4252 #define FW_ABILITY_MAX_SPEED_MASK 0xFUL
4253 #define FW_ABILITY_MAX_SPEED_16G 0x0
4254 #define FW_ABILITY_MAX_SPEED_32G 0x1
4255 #define FW_ABILITY_MAX_SPEED(ha) \
4256 (ha->fw_ability_mask & FW_ABILITY_MAX_SPEED_MASK)
4258 #define QLA_GET_DATA_RATE 0
4259 #define QLA_SET_DATA_RATE_NOLR 1
4260 #define QLA_SET_DATA_RATE_LR 2 /* Set speed and initiate LR */
4263 * Qlogic scsi host structure
4265 typedef struct scsi_qla_host {
4266 struct list_head list;
4267 struct list_head vp_fcports; /* list of fcports */
4268 struct list_head work_list;
4269 spinlock_t work_lock;
4270 struct work_struct iocb_work;
4272 /* Commonly used flags and state information. */
4273 struct Scsi_Host *host;
4274 unsigned long host_no;
4275 uint8_t host_str[16];
4278 uint32_t init_done :1;
4280 uint32_t reset_active :1;
4282 uint32_t management_server_logged_in :1;
4283 uint32_t process_response_queue :1;
4284 uint32_t difdix_supported:1;
4285 uint32_t delete_progress:1;
4287 uint32_t fw_tgt_reported:1;
4288 uint32_t bbcr_enable:1;
4289 uint32_t qpairs_available:1;
4290 uint32_t qpairs_req_created:1;
4291 uint32_t qpairs_rsp_created:1;
4292 uint32_t nvme_enabled:1;
4293 uint32_t nvme_first_burst:1;
4296 atomic_t loop_state;
4297 #define LOOP_TIMEOUT 1
4300 #define LOOP_UPDATE 4
4301 #define LOOP_READY 5
4304 unsigned long relogin_jif;
4305 unsigned long dpc_flags;
4306 #define RESET_MARKER_NEEDED 0 /* Send marker to ISP. */
4307 #define RESET_ACTIVE 1
4308 #define ISP_ABORT_NEEDED 2 /* Initiate ISP abort. */
4309 #define ABORT_ISP_ACTIVE 3 /* ISP abort in progress. */
4310 #define LOOP_RESYNC_NEEDED 4 /* Device Resync needed. */
4311 #define LOOP_RESYNC_ACTIVE 5
4312 #define LOCAL_LOOP_UPDATE 6 /* Perform a local loop update. */
4313 #define RSCN_UPDATE 7 /* Perform an RSCN update. */
4314 #define RELOGIN_NEEDED 8
4315 #define REGISTER_FC4_NEEDED 9 /* SNS FC4 registration required. */
4316 #define ISP_ABORT_RETRY 10 /* ISP aborted. */
4317 #define BEACON_BLINK_NEEDED 11
4318 #define REGISTER_FDMI_NEEDED 12
4319 #define FCPORT_UPDATE_NEEDED 13
4320 #define VP_DPC_NEEDED 14 /* wake up for VP dpc handling */
4321 #define UNLOADING 15
4322 #define NPIV_CONFIG_NEEDED 16
4323 #define ISP_UNRECOVERABLE 17
4324 #define FCOE_CTX_RESET_NEEDED 18 /* Initiate FCoE context reset */
4325 #define MPI_RESET_NEEDED 19 /* Initiate MPI FW reset */
4326 #define ISP_QUIESCE_NEEDED 20 /* Driver need some quiescence */
4327 #define N2N_LINK_RESET 21
4328 #define PORT_UPDATE_NEEDED 22
4329 #define FX00_RESET_RECOVERY 23
4330 #define FX00_TARGET_SCAN 24
4331 #define FX00_CRITEMP_RECOVERY 25
4332 #define FX00_HOST_INFO_RESEND 26
4333 #define QPAIR_ONLINE_CHECK_NEEDED 27
4334 #define SET_NVME_ZIO_THRESHOLD_NEEDED 28
4335 #define DETECT_SFP_CHANGE 29
4336 #define N2N_LOGIN_NEEDED 30
4337 #define IOCB_WORK_ACTIVE 31
4338 #define SET_ZIO_THRESHOLD_NEEDED 32
4339 #define ISP_ABORT_TO_ROM 33
4341 unsigned long pci_flags;
4342 #define PFLG_DISCONNECTED 0 /* PCI device removed */
4343 #define PFLG_DRIVER_REMOVING 1 /* PCI driver .remove */
4344 #define PFLG_DRIVER_PROBING 2 /* PCI driver .probe */
4346 uint32_t device_flags;
4347 #define SWITCH_FOUND BIT_0
4348 #define DFLG_NO_CABLE BIT_1
4349 #define DFLG_DEV_FAILED BIT_5
4351 /* ISP configuration data. */
4352 uint16_t loop_id; /* Host adapter loop id */
4353 uint16_t self_login_loop_id; /* host adapter loop id
4354 * get it on self login
4356 fc_port_t bidir_fcport; /* fcport used for bidir cmnds
4357 * no need of allocating it for
4361 port_id_t d_id; /* Host adapter port id */
4362 uint8_t marker_needed;
4363 uint16_t mgmt_svr_loop_id;
4367 /* Timeout timers. */
4368 uint8_t loop_down_abort_time; /* port down timer */
4369 atomic_t loop_down_timer; /* loop down timer */
4370 uint8_t link_down_timeout; /* link down timeout */
4372 uint32_t timer_active;
4373 struct timer_list timer;
4375 uint8_t node_name[WWN_SIZE];
4376 uint8_t port_name[WWN_SIZE];
4377 uint8_t fabric_node_name[WWN_SIZE];
4379 struct nvme_fc_local_port *nvme_local_port;
4380 struct completion nvme_del_done;
4382 uint16_t fcoe_vlan_id;
4383 uint16_t fcoe_fcf_idx;
4384 uint8_t fcoe_vn_port_mac[6];
4386 /* list of commands waiting on workqueue */
4387 struct list_head qla_cmd_list;
4388 struct list_head qla_sess_op_cmd_list;
4389 struct list_head unknown_atio_list;
4390 spinlock_t cmd_list_lock;
4391 struct delayed_work unknown_atio_work;
4393 /* Counter to detect races between ELS and RSCN events */
4394 atomic_t generation_tick;
4395 /* Time when global fcport update has been scheduled */
4396 int total_fcport_update_gen;
4397 /* List of pending LOGOs, protected by tgt_mutex */
4398 struct list_head logo_list;
4399 /* List of pending PLOGI acks, protected by hw lock */
4400 struct list_head plogi_ack_list;
4402 struct list_head qp_list;
4404 uint32_t vp_abort_cnt;
4406 struct fc_vport *fc_vport; /* holds fc_vport * for each vport */
4407 uint16_t vp_idx; /* vport ID */
4408 struct qla_qpair *qpair; /* base qpair */
4410 unsigned long vp_flags;
4411 #define VP_IDX_ACQUIRED 0 /* bit no 0 */
4412 #define VP_CREATE_NEEDED 1
4413 #define VP_BIND_NEEDED 2
4414 #define VP_DELETE_NEEDED 3
4415 #define VP_SCR_NEEDED 4 /* State Change Request registration */
4416 #define VP_CONFIG_OK 5 /* Flag to cfg VP, if FW is ready */
4418 #define VP_OFFLINE 0
4421 // #define VP_DISABLE 3
4422 uint16_t vp_err_state;
4423 uint16_t vp_prev_err_state;
4424 #define VP_ERR_UNKWN 0
4425 #define VP_ERR_PORTDWN 1
4426 #define VP_ERR_FAB_UNSUPPORTED 2
4427 #define VP_ERR_FAB_NORESOURCES 3
4428 #define VP_ERR_FAB_LOGOUT 4
4429 #define VP_ERR_ADAP_NORESOURCES 5
4430 struct qla_hw_data *hw;
4431 struct scsi_qlt_host vha_tgt;
4432 struct req_que *req;
4433 int fw_heartbeat_counter;
4434 int seconds_since_last_heartbeat;
4435 struct fc_host_statistics fc_host_stat;
4436 struct qla_statistics qla_stats;
4437 struct bidi_statistics bidi_stats;
4438 atomic_t vref_count;
4439 struct qla8044_reset_template reset_tmplt;
4442 uint16_t u_ql2xexchoffld;
4443 uint16_t u_ql2xiniexchg;
4444 uint16_t qlini_mode;
4445 uint16_t ql2xexchoffld;
4446 uint16_t ql2xiniexchg;
4448 struct name_list_extended gnl;
4449 /* Count of active session/fcport */
4451 wait_queue_head_t fcport_waitQ;
4452 wait_queue_head_t vref_waitq;
4453 uint8_t min_supported_speed;
4454 uint8_t n2n_node_name[WWN_SIZE];
4455 uint8_t n2n_port_name[WWN_SIZE];
4457 struct list_head gpnid_list;
4458 struct fab_scan scan;
4460 unsigned int irq_offset;
4463 struct qla27xx_image_status {
4464 uint8_t image_status_mask;
4465 uint16_t generation;
4468 uint8_t bitmap; /* 28xx only */
4469 uint8_t reserved[2];
4474 /* 28xx aux image status bimap values */
4475 #define QLA28XX_AUX_IMG_BOARD_CONFIG BIT_0
4476 #define QLA28XX_AUX_IMG_VPD_NVRAM BIT_1
4477 #define QLA28XX_AUX_IMG_NPIV_CONFIG_0_1 BIT_2
4478 #define QLA28XX_AUX_IMG_NPIV_CONFIG_2_3 BIT_3
4480 #define SET_VP_IDX 1
4482 #define RESET_VP_IDX 3
4483 #define RESET_AL_PA 4
4484 struct qla_tgt_vp_map {
4486 scsi_qla_host_t *vha;
4490 dma_addr_t dma_addr; /* OUT */
4491 uint32_t dma_len; /* OUT */
4493 uint32_t tot_bytes; /* IN */
4494 struct scatterlist *cur_sg; /* IN */
4496 /* for book keeping, bzero on initial invocation */
4497 uint32_t bytes_consumed;
4499 uint32_t tot_partial;
4506 #define QLA_FW_STARTED(_ha) { \
4508 _ha->flags.fw_started = 1; \
4509 _ha->base_qpair->fw_started = 1; \
4510 for (i = 0; i < _ha->max_qpairs; i++) { \
4511 if (_ha->queue_pair_map[i]) \
4512 _ha->queue_pair_map[i]->fw_started = 1; \
4516 #define QLA_FW_STOPPED(_ha) { \
4518 _ha->flags.fw_started = 0; \
4519 _ha->base_qpair->fw_started = 0; \
4520 for (i = 0; i < _ha->max_qpairs; i++) { \
4521 if (_ha->queue_pair_map[i]) \
4522 _ha->queue_pair_map[i]->fw_started = 0; \
4527 #define SFUB_CHECKSUM_SIZE 4
4529 struct secure_flash_update_block {
4530 uint32_t block_info;
4531 uint32_t signature_lo;
4532 uint32_t signature_hi;
4533 uint32_t signature_upper[0x3e];
4536 struct secure_flash_update_block_pk {
4537 uint32_t block_info;
4538 uint32_t signature_lo;
4539 uint32_t signature_hi;
4540 uint32_t signature_upper[0x3e];
4541 uint32_t public_key[0x41];
4545 * Macros to help code, maintain, etc.
4547 #define LOOP_TRANSITION(ha) \
4548 (test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) || \
4549 test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags) || \
4550 atomic_read(&ha->loop_state) == LOOP_DOWN)
4552 #define STATE_TRANSITION(ha) \
4553 (test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags) || \
4554 test_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags))
4556 #define QLA_VHA_MARK_BUSY(__vha, __bail) do { \
4557 atomic_inc(&__vha->vref_count); \
4559 if (__vha->flags.delete_progress) { \
4560 atomic_dec(&__vha->vref_count); \
4561 wake_up(&__vha->vref_waitq); \
4568 #define QLA_VHA_MARK_NOT_BUSY(__vha) do { \
4569 atomic_dec(&__vha->vref_count); \
4570 wake_up(&__vha->vref_waitq); \
4573 #define QLA_QPAIR_MARK_BUSY(__qpair, __bail) do { \
4574 atomic_inc(&__qpair->ref_count); \
4576 if (__qpair->delete_in_progress) { \
4577 atomic_dec(&__qpair->ref_count); \
4584 #define QLA_QPAIR_MARK_NOT_BUSY(__qpair) \
4585 atomic_dec(&__qpair->ref_count); \
4588 #define QLA_ENA_CONF(_ha) {\
4590 _ha->base_qpair->enable_explicit_conf = 1; \
4591 for (i = 0; i < _ha->max_qpairs; i++) { \
4592 if (_ha->queue_pair_map[i]) \
4593 _ha->queue_pair_map[i]->enable_explicit_conf = 1; \
4597 #define QLA_DIS_CONF(_ha) {\
4599 _ha->base_qpair->enable_explicit_conf = 0; \
4600 for (i = 0; i < _ha->max_qpairs; i++) { \
4601 if (_ha->queue_pair_map[i]) \
4602 _ha->queue_pair_map[i]->enable_explicit_conf = 0; \
4607 * qla2x00 local function return status codes
4609 #define MBS_MASK 0x3fff
4611 #define QLA_SUCCESS (MBS_COMMAND_COMPLETE & MBS_MASK)
4612 #define QLA_INVALID_COMMAND (MBS_INVALID_COMMAND & MBS_MASK)
4613 #define QLA_INTERFACE_ERROR (MBS_HOST_INTERFACE_ERROR & MBS_MASK)
4614 #define QLA_TEST_FAILED (MBS_TEST_FAILED & MBS_MASK)
4615 #define QLA_COMMAND_ERROR (MBS_COMMAND_ERROR & MBS_MASK)
4616 #define QLA_PARAMETER_ERROR (MBS_COMMAND_PARAMETER_ERROR & MBS_MASK)
4617 #define QLA_PORT_ID_USED (MBS_PORT_ID_USED & MBS_MASK)
4618 #define QLA_LOOP_ID_USED (MBS_LOOP_ID_USED & MBS_MASK)
4619 #define QLA_ALL_IDS_IN_USE (MBS_ALL_IDS_IN_USE & MBS_MASK)
4620 #define QLA_NOT_LOGGED_IN (MBS_NOT_LOGGED_IN & MBS_MASK)
4622 #define QLA_FUNCTION_TIMEOUT 0x100
4623 #define QLA_FUNCTION_PARAMETER_ERROR 0x101
4624 #define QLA_FUNCTION_FAILED 0x102
4625 #define QLA_MEMORY_ALLOC_FAILED 0x103
4626 #define QLA_LOCK_TIMEOUT 0x104
4627 #define QLA_ABORTED 0x105
4628 #define QLA_SUSPENDED 0x106
4629 #define QLA_BUSY 0x107
4630 #define QLA_ALREADY_REGISTERED 0x109
4632 #define NVRAM_DELAY() udelay(10)
4635 * Flash support definitions
4637 #define OPTROM_SIZE_2300 0x20000
4638 #define OPTROM_SIZE_2322 0x100000
4639 #define OPTROM_SIZE_24XX 0x100000
4640 #define OPTROM_SIZE_25XX 0x200000
4641 #define OPTROM_SIZE_81XX 0x400000
4642 #define OPTROM_SIZE_82XX 0x800000
4643 #define OPTROM_SIZE_83XX 0x1000000
4644 #define OPTROM_SIZE_28XX 0x2000000
4646 #define OPTROM_BURST_SIZE 0x1000
4647 #define OPTROM_BURST_DWORDS (OPTROM_BURST_SIZE / 4)
4649 #define QLA_DSDS_PER_IOCB 37
4651 #define CMD_SP(Cmnd) ((Cmnd)->SCp.ptr)
4653 #define QLA_SG_ALL 1024
4655 enum nexus_wait_type {
4661 /* Refer to SNIA SFF 8247 */
4662 struct sff_8247_a0 {
4663 u8 txid; /* transceiver id */
4666 /* compliance code */
4667 u8 eth_infi_cc3; /* ethernet, inifiband */
4671 #define FC_LL_VL BIT_7 /* very long */
4672 #define FC_LL_S BIT_6 /* Short */
4673 #define FC_LL_I BIT_5 /* Intermidiate*/
4674 #define FC_LL_L BIT_4 /* Long */
4675 #define FC_LL_M BIT_3 /* Medium */
4676 #define FC_LL_SA BIT_2 /* ShortWave laser */
4677 #define FC_LL_LC BIT_1 /* LongWave laser */
4678 #define FC_LL_EL BIT_0 /* Electrical inter enclosure */
4681 #define FC_TEC_EL BIT_7 /* Electrical inter enclosure */
4682 #define FC_TEC_SN BIT_6 /* short wave w/o OFC */
4683 #define FC_TEC_SL BIT_5 /* short wave with OFC */
4684 #define FC_TEC_LL BIT_4 /* Longwave Laser */
4685 #define FC_TEC_ACT BIT_3 /* Active cable */
4686 #define FC_TEC_PAS BIT_2 /* Passive cable */
4688 /* Transmission Media */
4689 #define FC_MED_TW BIT_7 /* Twin Ax */
4690 #define FC_MED_TP BIT_6 /* Twited Pair */
4691 #define FC_MED_MI BIT_5 /* Min Coax */
4692 #define FC_MED_TV BIT_4 /* Video Coax */
4693 #define FC_MED_M6 BIT_3 /* Multimode, 62.5um */
4694 #define FC_MED_M5 BIT_2 /* Multimode, 50um */
4695 #define FC_MED_SM BIT_0 /* Single Mode */
4697 /* speed FC_SP_12: 12*100M = 1200 MB/s */
4698 #define FC_SP_12 BIT_7
4699 #define FC_SP_8 BIT_6
4700 #define FC_SP_16 BIT_5
4701 #define FC_SP_4 BIT_4
4702 #define FC_SP_32 BIT_3
4703 #define FC_SP_2 BIT_2
4704 #define FC_SP_1 BIT_0
4709 u8 length_km; /* offset 14/eh */
4715 #define SFF_VEN_NAME_LEN 16
4716 u8 vendor_name[SFF_VEN_NAME_LEN]; /* offset 20/14h */
4719 #define SFF_PART_NAME_LEN 16
4720 u8 vendor_pn[SFF_PART_NAME_LEN]; /* part number */
4725 u8 options[2]; /* offset 64 */
4734 u8 vendor_specific[32];
4738 #define AUTO_DETECT_SFP_SUPPORT(_vha)\
4739 (ql2xautodetectsfp && !_vha->vp_idx && \
4740 (IS_QLA25XX(_vha->hw) || IS_QLA81XX(_vha->hw) ||\
4741 IS_QLA83XX(_vha->hw) || IS_QLA27XX(_vha->hw) || \
4742 IS_QLA28XX(_vha->hw)))
4744 #define FLASH_SEMAPHORE_REGISTER_ADDR 0x00101016
4746 #define USER_CTRL_IRQ(_ha) (ql2xuctrlirq && QLA_TGT_MODE_ENABLED() && \
4747 (IS_QLA27XX(_ha) || IS_QLA28XX(_ha) || IS_QLA83XX(_ha)))
4749 #define SAVE_TOPO(_ha) { \
4750 if (_ha->current_topology) \
4751 _ha->prev_topology = _ha->current_topology; \
4754 #define N2N_TOPO(ha) \
4755 ((ha->prev_topology == ISP_CFG_N && !ha->current_topology) || \
4756 ha->current_topology == ISP_CFG_N || \
4757 !ha->current_topology)
4759 #include "qla_target.h"
4760 #include "qla_gbl.h"
4761 #include "qla_dbg.h"
4762 #include "qla_inline.h"