rtc: pcf8523: don't return invalid date when battery is low
[linux-2.6-block.git] / drivers / cpufreq / Kconfig.arm
1 #
2 # ARM CPU Frequency scaling drivers
3 #
4
5 config ACPI_CPPC_CPUFREQ
6         tristate "CPUFreq driver based on the ACPI CPPC spec"
7         depends on ACPI_PROCESSOR
8         select ACPI_CPPC_LIB
9         help
10           This adds a CPUFreq driver which uses CPPC methods
11           as described in the ACPIv5.1 spec. CPPC stands for
12           Collaborative Processor Performance Controls. It
13           is based on an abstract continuous scale of CPU
14           performance values which allows the remote power
15           processor to flexibly optimize for power and
16           performance. CPPC relies on power management firmware
17           support for its operation.
18
19           If in doubt, say N.
20
21 config ARM_ARMADA_37XX_CPUFREQ
22         tristate "Armada 37xx CPUFreq support"
23         depends on ARCH_MVEBU && CPUFREQ_DT
24         help
25           This adds the CPUFreq driver support for Marvell Armada 37xx SoCs.
26           The Armada 37xx PMU supports 4 frequency and VDD levels.
27
28 # big LITTLE core layer and glue drivers
29 config ARM_BIG_LITTLE_CPUFREQ
30         tristate "Generic ARM big LITTLE CPUfreq driver"
31         depends on ARM_CPU_TOPOLOGY && HAVE_CLK
32         # if CPU_THERMAL is on and THERMAL=m, ARM_BIT_LITTLE_CPUFREQ cannot be =y
33         depends on !CPU_THERMAL || THERMAL
34         select PM_OPP
35         help
36           This enables the Generic CPUfreq driver for ARM big.LITTLE platforms.
37
38 config ARM_SCPI_CPUFREQ
39         tristate "SCPI based CPUfreq driver"
40         depends on ARM_SCPI_PROTOCOL && COMMON_CLK_SCPI
41         depends on !CPU_THERMAL || THERMAL
42         help
43           This adds the CPUfreq driver support for ARM platforms using SCPI
44           protocol for CPU power management.
45
46           This driver uses SCPI Message Protocol driver to interact with the
47           firmware providing the CPU DVFS functionality.
48
49 config ARM_VEXPRESS_SPC_CPUFREQ
50         tristate "Versatile Express SPC based CPUfreq driver"
51         depends on ARM_BIG_LITTLE_CPUFREQ && ARCH_VEXPRESS_SPC
52         help
53           This add the CPUfreq driver support for Versatile Express
54           big.LITTLE platforms using SPC for power management.
55
56 config ARM_BRCMSTB_AVS_CPUFREQ
57         tristate "Broadcom STB AVS CPUfreq driver"
58         depends on ARCH_BRCMSTB || COMPILE_TEST
59         default y
60         help
61           Some Broadcom STB SoCs use a co-processor running proprietary firmware
62           ("AVS") to handle voltage and frequency scaling. This driver provides
63           a standard CPUfreq interface to to the firmware.
64
65           Say Y, if you have a Broadcom SoC with AVS support for DFS or DVFS.
66
67 config ARM_HIGHBANK_CPUFREQ
68         tristate "Calxeda Highbank-based"
69         depends on ARCH_HIGHBANK && CPUFREQ_DT && REGULATOR
70         default m
71         help
72           This adds the CPUFreq driver for Calxeda Highbank SoC
73           based boards.
74
75           If in doubt, say N.
76
77 config ARM_IMX6Q_CPUFREQ
78         tristate "Freescale i.MX6 cpufreq support"
79         depends on ARCH_MXC
80         depends on REGULATOR_ANATOP
81         select PM_OPP
82         help
83           This adds cpufreq driver support for Freescale i.MX6 series SoCs.
84
85           If in doubt, say N.
86
87 config ARM_KIRKWOOD_CPUFREQ
88         def_bool MACH_KIRKWOOD
89         help
90           This adds the CPUFreq driver for Marvell Kirkwood
91           SoCs.
92
93 config ARM_MEDIATEK_CPUFREQ
94         tristate "CPU Frequency scaling support for MediaTek SoCs"
95         depends on ARCH_MEDIATEK && REGULATOR
96         depends on !CPU_THERMAL || THERMAL
97         select PM_OPP
98         help
99           This adds the CPUFreq driver support for MediaTek SoCs.
100
101 config ARM_OMAP2PLUS_CPUFREQ
102         bool "TI OMAP2+"
103         depends on ARCH_OMAP2PLUS
104         default ARCH_OMAP2PLUS
105
106 config ARM_QCOM_CPUFREQ_KRYO
107         tristate "Qualcomm Kryo based CPUFreq"
108         depends on ARM64
109         depends on QCOM_QFPROM
110         depends on QCOM_SMEM
111         select PM_OPP
112         help
113           This adds the CPUFreq driver for Qualcomm Kryo SoC based boards.
114
115           If in doubt, say N.
116
117 config ARM_S3C_CPUFREQ
118         bool
119         help
120           Internal configuration node for common cpufreq on Samsung SoC
121
122 config ARM_S3C24XX_CPUFREQ
123         bool "CPUfreq driver for Samsung S3C24XX series CPUs (EXPERIMENTAL)"
124         depends on ARCH_S3C24XX
125         select ARM_S3C_CPUFREQ
126         help
127           This enables the CPUfreq driver for the Samsung S3C24XX family
128           of CPUs.
129
130           For details, take a look at <file:Documentation/cpu-freq>.
131
132           If in doubt, say N.
133
134 config ARM_S3C24XX_CPUFREQ_DEBUG
135         bool "Debug CPUfreq Samsung driver core"
136         depends on ARM_S3C24XX_CPUFREQ
137         help
138           Enable s3c_freq_dbg for the Samsung S3C CPUfreq core
139
140 config ARM_S3C24XX_CPUFREQ_IODEBUG
141         bool "Debug CPUfreq Samsung driver IO timing"
142         depends on ARM_S3C24XX_CPUFREQ
143         help
144           Enable s3c_freq_iodbg for the Samsung S3C CPUfreq core
145
146 config ARM_S3C24XX_CPUFREQ_DEBUGFS
147         bool "Export debugfs for CPUFreq"
148         depends on ARM_S3C24XX_CPUFREQ && DEBUG_FS
149         help
150           Export status information via debugfs.
151
152 config ARM_S3C2410_CPUFREQ
153         bool
154         depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2410
155         select S3C2410_CPUFREQ_UTILS
156         help
157           CPU Frequency scaling support for S3C2410
158
159 config ARM_S3C2412_CPUFREQ
160         bool
161         depends on ARM_S3C24XX_CPUFREQ && CPU_S3C2412
162         default y
163         select S3C2412_IOTIMING
164         help
165           CPU Frequency scaling support for S3C2412 and S3C2413 SoC CPUs.
166
167 config ARM_S3C2416_CPUFREQ
168         bool "S3C2416 CPU Frequency scaling support"
169         depends on CPU_S3C2416
170         help
171           This adds the CPUFreq driver for the Samsung S3C2416 and
172           S3C2450 SoC. The S3C2416 supports changing the rate of the
173           armdiv clock source and also entering a so called dynamic
174           voltage scaling mode in which it is possible to reduce the
175           core voltage of the CPU.
176
177           If in doubt, say N.
178
179 config ARM_S3C2416_CPUFREQ_VCORESCALE
180         bool "Allow voltage scaling for S3C2416 arm core"
181         depends on ARM_S3C2416_CPUFREQ && REGULATOR
182         help
183           Enable CPU voltage scaling when entering the dvs mode.
184           It uses information gathered through existing hardware and
185           tests but not documented in any datasheet.
186
187           If in doubt, say N.
188
189 config ARM_S3C2440_CPUFREQ
190         bool "S3C2440/S3C2442 CPU Frequency scaling support"
191         depends on ARM_S3C24XX_CPUFREQ && (CPU_S3C2440 || CPU_S3C2442)
192         select S3C2410_CPUFREQ_UTILS
193         default y
194         help
195           CPU Frequency scaling support for S3C2440 and S3C2442 SoC CPUs.
196
197 config ARM_S3C64XX_CPUFREQ
198         bool "Samsung S3C64XX"
199         depends on CPU_S3C6410
200         default y
201         help
202           This adds the CPUFreq driver for Samsung S3C6410 SoC.
203
204           If in doubt, say N.
205
206 config ARM_S5PV210_CPUFREQ
207         bool "Samsung S5PV210 and S5PC110"
208         depends on CPU_S5PV210
209         default y
210         help
211           This adds the CPUFreq driver for Samsung S5PV210 and
212           S5PC110 SoCs.
213
214           If in doubt, say N.
215
216 config ARM_SA1100_CPUFREQ
217         bool
218
219 config ARM_SA1110_CPUFREQ
220         bool
221
222 config ARM_SCMI_CPUFREQ
223         tristate "SCMI based CPUfreq driver"
224         depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
225         depends on !CPU_THERMAL || THERMAL
226         select PM_OPP
227         help
228           This adds the CPUfreq driver support for ARM platforms using SCMI
229           protocol for CPU power management.
230
231           This driver uses SCMI Message Protocol driver to interact with the
232           firmware providing the CPU DVFS functionality.
233
234 config ARM_SPEAR_CPUFREQ
235         bool "SPEAr CPUFreq support"
236         depends on PLAT_SPEAR
237         default y
238         help
239           This adds the CPUFreq driver support for SPEAr SOCs.
240
241 config ARM_STI_CPUFREQ
242         tristate "STi CPUFreq support"
243         depends on SOC_STIH407
244         help
245           This driver uses the generic OPP framework to match the running
246           platform with a predefined set of suitable values.  If not provided
247           we will fall-back so safe-values contained in Device Tree.  Enable
248           this config option if you wish to add CPUFreq support for STi based
249           SoCs.
250
251 config ARM_TANGO_CPUFREQ
252         bool
253         depends on CPUFREQ_DT && ARCH_TANGO
254         default y
255
256 config ARM_TEGRA20_CPUFREQ
257         tristate "Tegra20 CPUFreq support"
258         depends on ARCH_TEGRA
259         default y
260         help
261           This adds the CPUFreq driver support for Tegra20 SOCs.
262
263 config ARM_TEGRA124_CPUFREQ
264         tristate "Tegra124 CPUFreq support"
265         depends on ARCH_TEGRA && CPUFREQ_DT && REGULATOR
266         default y
267         help
268           This adds the CPUFreq driver support for Tegra124 SOCs.
269
270 config ARM_TEGRA186_CPUFREQ
271         tristate "Tegra186 CPUFreq support"
272         depends on ARCH_TEGRA && TEGRA_BPMP
273         help
274           This adds the CPUFreq driver support for Tegra186 SOCs.
275
276 config ARM_TI_CPUFREQ
277         bool "Texas Instruments CPUFreq support"
278         depends on ARCH_OMAP2PLUS
279         help
280           This driver enables valid OPPs on the running platform based on
281           values contained within the SoC in use. Enable this in order to
282           use the cpufreq-dt driver on all Texas Instruments platforms that
283           provide dt based operating-points-v2 tables with opp-supported-hw
284           data provided. Required for cpufreq support on AM335x, AM437x,
285           DRA7x, and AM57x platforms.
286
287 config ARM_PXA2xx_CPUFREQ
288         tristate "Intel PXA2xx CPUfreq driver"
289         depends on PXA27x || PXA25x
290         help
291           This add the CPUFreq driver support for Intel PXA2xx SOCs.
292
293           If in doubt, say N.