arch/arm/boot/dts/imx28.dtsi

   1 /*
   2  * Copyright 2012 Freescale Semiconductor, Inc.
   3  *
   4  * The code contained herein is licensed under the GNU General Public
   5  * License. You may obtain a copy of the GNU General Public License
   6  * Version 2 or later at the following locations:
   7  *
   8  * http://www.opensource.org/licenses/gpl-license.html
   9  * http://www.gnu.org/copyleft/gpl.html
  10  */
  11
  12 #include <dt-bindings/gpio/gpio.h>
  13 #include "skeleton.dtsi"
  14 #include "imx28-pinfunc.h"
  15
  16 / {
  17         interrupt-parent = <&icoll>;
  18
  19         aliases {
  20                 ethernet0 = &mac0;
  21                 ethernet1 = &mac1;
  22                 gpio0 = &gpio0;
  23                 gpio1 = &gpio1;
  24                 gpio2 = &gpio2;
  25                 gpio3 = &gpio3;
  26                 gpio4 = &gpio4;
  27                 saif0 = &saif0;
  28                 saif1 = &saif1;
  29                 serial0 = &auart0;
  30                 serial1 = &auart1;
  31                 serial2 = &auart2;
  32                 serial3 = &auart3;
  33                 serial4 = &auart4;
  34                 spi0 = &ssp1;
  35                 spi1 = &ssp2;
  36                 usbphy0 = &usbphy0;
  37                 usbphy1 = &usbphy1;
  38         };
  39
  40         cpus {
  41                 #address-cells = <0>;
  42                 #size-cells = <0>;
  43
  44                 cpu {
  45                         compatible = "arm,arm926ej-s";
  46                         device_type = "cpu";
  47                 };
  48         };
  49
  50         apb@80000000 {
  51                 compatible = "simple-bus";
  52                 #address-cells = <1>;
  53                 #size-cells = <1>;
  54                 reg = <0x80000000 0x80000>;
  55                 ranges;
  56
  57                 apbh@80000000 {
  58                         compatible = "simple-bus";
  59                         #address-cells = <1>;
  60                         #size-cells = <1>;
  61                         reg = <0x80000000 0x3c900>;
  62                         ranges;
  63
  64                         icoll: interrupt-controller@80000000 {
  65                                 compatible = "fsl,imx28-icoll", "fsl,icoll";
  66                                 interrupt-controller;
  67                                 #interrupt-cells = <1>;
  68                                 reg = <0x80000000 0x2000>;
  69                         };
  70
  71                         hsadc: hsadc@80002000 {
  72                                 reg = <0x80002000 0x2000>;
  73                                 interrupts = <13>;
  74                                 dmas = <&dma_apbh 12>;
  75                                 dma-names = "rx";
  76                                 status = "disabled";
  77                         };
  78
  79                         dma_apbh: dma-apbh@80004000 {
  80                                 compatible = "fsl,imx28-dma-apbh";
  81                                 reg = <0x80004000 0x2000>;
  82                                 interrupts = <82 83 84 85
  83                                               88 88 88 88
  84                                               88 88 88 88
  85                                               87 86 0 0>;
  86                                 interrupt-names = "ssp0", "ssp1", "ssp2", "ssp3",
  87                                                   "gpmi0", "gmpi1", "gpmi2", "gmpi3",
  88                                                   "gpmi4", "gmpi5", "gpmi6", "gmpi7",
  89                                                   "hsadc", "lcdif", "empty", "empty";
  90                                 #dma-cells = <1>;
  91                                 dma-channels = <16>;
  92                                 clocks = <&clks 25>;
  93                         };
  94
  95                         perfmon: perfmon@80006000 {
  96                                 reg = <0x80006000 0x800>;
  97                                 interrupts = <27>;
  98                                 status = "disabled";
  99                         };
 100
 101                         gpmi: gpmi-nand@8000c000 {
 102                                 compatible = "fsl,imx28-gpmi-nand";
 103                                 #address-cells = <1>;
 104                                 #size-cells = <1>;
 105                                 reg = <0x8000c000 0x2000>, <0x8000a000 0x2000>;
 106                                 reg-names = "gpmi-nand", "bch";
 107                                 interrupts = <41>;
 108                                 interrupt-names = "bch";
 109                                 clocks = <&clks 50>;
 110                                 clock-names = "gpmi_io";
 111                                 dmas = <&dma_apbh 4>;
 112                                 dma-names = "rx-tx";
 113                                 status = "disabled";
 114                         };
 115
 116                         ssp0: ssp@80010000 {
 117                                 #address-cells = <1>;
 118                                 #size-cells = <0>;
 119                                 reg = <0x80010000 0x2000>;
 120                                 interrupts = <96>;
 121                                 clocks = <&clks 46>;
 122                                 dmas = <&dma_apbh 0>;
 123                                 dma-names = "rx-tx";
 124                                 status = "disabled";
 125                         };
 126
 127                         ssp1: ssp@80012000 {
 128                                 #address-cells = <1>;
 129                                 #size-cells = <0>;
 130                                 reg = <0x80012000 0x2000>;
 131                                 interrupts = <97>;
 132                                 clocks = <&clks 47>;
 133                                 dmas = <&dma_apbh 1>;
 134                                 dma-names = "rx-tx";
 135                                 status = "disabled";
 136                         };
 137
 138                         ssp2: ssp@80014000 {
 139                                 #address-cells = <1>;
 140                                 #size-cells = <0>;
 141                                 reg = <0x80014000 0x2000>;
 142                                 interrupts = <98>;
 143                                 clocks = <&clks 48>;
 144                                 dmas = <&dma_apbh 2>;
 145                                 dma-names = "rx-tx";
 146                                 status = "disabled";
 147                         };
 148
 149                         ssp3: ssp@80016000 {
 150                                 #address-cells = <1>;
 151                                 #size-cells = <0>;
 152                                 reg = <0x80016000 0x2000>;
 153                                 interrupts = <99>;
 154                                 clocks = <&clks 49>;
 155                                 dmas = <&dma_apbh 3>;
 156                                 dma-names = "rx-tx";
 157                                 status = "disabled";
 158                         };
 159
 160                         pinctrl: pinctrl@80018000 {
 161                                 #address-cells = <1>;
 162                                 #size-cells = <0>;
 163                                 compatible = "fsl,imx28-pinctrl", "simple-bus";
 164                                 reg = <0x80018000 0x2000>;
 165
 166                                 gpio0: gpio@0 {
 167                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 168                                         interrupts = <127>;
 169                                         gpio-controller;
 170                                         #gpio-cells = <2>;
 171                                         interrupt-controller;
 172                                         #interrupt-cells = <2>;
 173                                 };
 174
 175                                 gpio1: gpio@1 {
 176                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 177                                         interrupts = <126>;
 178                                         gpio-controller;
 179                                         #gpio-cells = <2>;
 180                                         interrupt-controller;
 181                                         #interrupt-cells = <2>;
 182                                 };
 183
 184                                 gpio2: gpio@2 {
 185                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 186                                         interrupts = <125>;
 187                                         gpio-controller;
 188                                         #gpio-cells = <2>;
 189                                         interrupt-controller;
 190                                         #interrupt-cells = <2>;
 191                                 };
 192
 193                                 gpio3: gpio@3 {
 194                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 195                                         interrupts = <124>;
 196                                         gpio-controller;
 197                                         #gpio-cells = <2>;
 198                                         interrupt-controller;
 199                                         #interrupt-cells = <2>;
 200                                 };
 201
 202                                 gpio4: gpio@4 {
 203                                         compatible = "fsl,imx28-gpio", "fsl,mxs-gpio";
 204                                         interrupts = <123>;
 205                                         gpio-controller;
 206                                         #gpio-cells = <2>;
 207                                         interrupt-controller;
 208                                         #interrupt-cells = <2>;
 209                                 };
 210
 211                                 duart_pins_a: duart@0 {
 212                                         reg = <0>;
 213                                         fsl,pinmux-ids = <
 214                                                 MX28_PAD_PWM0__DUART_RX
 215                                                 MX28_PAD_PWM1__DUART_TX
 216                                         >;
 217                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 218                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 219                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 220                                 };
 221
 222                                 duart_pins_b: duart@1 {
 223                                         reg = <1>;
 224                                         fsl,pinmux-ids = <
 225                                                 MX28_PAD_AUART0_CTS__DUART_RX
 226                                                 MX28_PAD_AUART0_RTS__DUART_TX
 227                                         >;
 228                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 229                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 230                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 231                                 };
 232
 233                                 duart_4pins_a: duart-4pins@0 {
 234                                         reg = <0>;
 235                                         fsl,pinmux-ids = <
 236                                                 MX28_PAD_AUART0_CTS__DUART_RX
 237                                                 MX28_PAD_AUART0_RTS__DUART_TX
 238                                                 MX28_PAD_AUART0_RX__DUART_CTS
 239                                                 MX28_PAD_AUART0_TX__DUART_RTS
 240                                         >;
 241                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 242                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 243                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 244                                 };
 245
 246                                 gpmi_pins_a: gpmi-nand@0 {
 247                                         reg = <0>;
 248                                         fsl,pinmux-ids = <
 249                                                 MX28_PAD_GPMI_D00__GPMI_D0
 250                                                 MX28_PAD_GPMI_D01__GPMI_D1
 251                                                 MX28_PAD_GPMI_D02__GPMI_D2
 252                                                 MX28_PAD_GPMI_D03__GPMI_D3
 253                                                 MX28_PAD_GPMI_D04__GPMI_D4
 254                                                 MX28_PAD_GPMI_D05__GPMI_D5
 255                                                 MX28_PAD_GPMI_D06__GPMI_D6
 256                                                 MX28_PAD_GPMI_D07__GPMI_D7
 257                                                 MX28_PAD_GPMI_CE0N__GPMI_CE0N
 258                                                 MX28_PAD_GPMI_RDY0__GPMI_READY0
 259                                                 MX28_PAD_GPMI_RDN__GPMI_RDN
 260                                                 MX28_PAD_GPMI_WRN__GPMI_WRN
 261                                                 MX28_PAD_GPMI_ALE__GPMI_ALE
 262                                                 MX28_PAD_GPMI_CLE__GPMI_CLE
 263                                                 MX28_PAD_GPMI_RESETN__GPMI_RESETN
 264                                         >;
 265                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 266                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 267                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 268                                 };
 269
 270                                 gpmi_status_cfg: gpmi-status-cfg {
 271                                         fsl,pinmux-ids = <
 272                                                 MX28_PAD_GPMI_RDN__GPMI_RDN
 273                                                 MX28_PAD_GPMI_WRN__GPMI_WRN
 274                                                 MX28_PAD_GPMI_RESETN__GPMI_RESETN
 275                                         >;
 276                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 277                                 };
 278
 279                                 auart0_pins_a: auart0@0 {
 280                                         reg = <0>;
 281                                         fsl,pinmux-ids = <
 282                                                 MX28_PAD_AUART0_RX__AUART0_RX
 283                                                 MX28_PAD_AUART0_TX__AUART0_TX
 284                                                 MX28_PAD_AUART0_CTS__AUART0_CTS
 285                                                 MX28_PAD_AUART0_RTS__AUART0_RTS
 286                                         >;
 287                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 288                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 289                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 290                                 };
 291
 292                                 auart0_2pins_a: auart0-2pins@0 {
 293                                         reg = <0>;
 294                                         fsl,pinmux-ids = <
 295                                                 MX28_PAD_AUART0_RX__AUART0_RX
 296                                                 MX28_PAD_AUART0_TX__AUART0_TX
 297                                         >;
 298                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 299                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 300                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 301                                 };
 302
 303                                 auart1_pins_a: auart1@0 {
 304                                         reg = <0>;
 305                                         fsl,pinmux-ids = <
 306                                                 MX28_PAD_AUART1_RX__AUART1_RX
 307                                                 MX28_PAD_AUART1_TX__AUART1_TX
 308                                                 MX28_PAD_AUART1_CTS__AUART1_CTS
 309                                                 MX28_PAD_AUART1_RTS__AUART1_RTS
 310                                         >;
 311                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 312                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 313                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 314                                 };
 315
 316                                 auart1_2pins_a: auart1-2pins@0 {
 317                                         reg = <0>;
 318                                         fsl,pinmux-ids = <
 319                                                 MX28_PAD_AUART1_RX__AUART1_RX
 320                                                 MX28_PAD_AUART1_TX__AUART1_TX
 321                                         >;
 322                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 323                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 324                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 325                                 };
 326
 327                                 auart2_2pins_a: auart2-2pins@0 {
 328                                         reg = <0>;
 329                                         fsl,pinmux-ids = <
 330                                                 MX28_PAD_SSP2_SCK__AUART2_RX
 331                                                 MX28_PAD_SSP2_MOSI__AUART2_TX
 332                                         >;
 333                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 334                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 335                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 336                                 };
 337
 338                                 auart2_2pins_b: auart2-2pins@1 {
 339                                         reg = <1>;
 340                                         fsl,pinmux-ids = <
 341                                                 MX28_PAD_AUART2_RX__AUART2_RX
 342                                                 MX28_PAD_AUART2_TX__AUART2_TX
 343                                         >;
 344                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 345                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 346                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 347                                 };
 348
 349                                 auart2_pins_a: auart2-pins@0 {
 350                                         reg = <0>;
 351                                         fsl,pinmux-ids = <
 352                                                 MX28_PAD_AUART2_RX__AUART2_RX
 353                                                 MX28_PAD_AUART2_TX__AUART2_TX
 354                                                 MX28_PAD_AUART2_CTS__AUART2_CTS
 355                                                 MX28_PAD_AUART2_RTS__AUART2_RTS
 356                                         >;
 357                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 358                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 359                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 360                                 };
 361
 362                                 auart3_pins_a: auart3@0 {
 363                                         reg = <0>;
 364                                         fsl,pinmux-ids = <
 365                                                 MX28_PAD_AUART3_RX__AUART3_RX
 366                                                 MX28_PAD_AUART3_TX__AUART3_TX
 367                                                 MX28_PAD_AUART3_CTS__AUART3_CTS
 368                                                 MX28_PAD_AUART3_RTS__AUART3_RTS
 369                                         >;
 370                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 371                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 372                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 373                                 };
 374
 375                                 auart3_2pins_a: auart3-2pins@0 {
 376                                         reg = <0>;
 377                                         fsl,pinmux-ids = <
 378                                                 MX28_PAD_SSP2_MISO__AUART3_RX
 379                                                 MX28_PAD_SSP2_SS0__AUART3_TX
 380                                         >;
 381                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 382                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 383                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 384                                 };
 385
 386                                 auart3_2pins_b: auart3-2pins@1 {
 387                                         reg = <1>;
 388                                         fsl,pinmux-ids = <
 389                                                 MX28_PAD_AUART3_RX__AUART3_RX
 390                                                 MX28_PAD_AUART3_TX__AUART3_TX
 391                                         >;
 392                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 393                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 394                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 395                                 };
 396
 397                                 auart4_2pins_a: auart4@0 {
 398                                         reg = <0>;
 399                                         fsl,pinmux-ids = <
 400                                                 MX28_PAD_SSP3_SCK__AUART4_TX
 401                                                 MX28_PAD_SSP3_MOSI__AUART4_RX
 402                                         >;
 403                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 404                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 405                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 406                                 };
 407
 408                                 auart4_2pins_b: auart4@1 {
 409                                         reg = <1>;
 410                                         fsl,pinmux-ids = <
 411                                                 MX28_PAD_AUART0_CTS__AUART4_RX
 412                                                 MX28_PAD_AUART0_RTS__AUART4_TX
 413                                         >;
 414                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 415                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 416                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 417                                 };
 418
 419                                 mac0_pins_a: mac0@0 {
 420                                         reg = <0>;
 421                                         fsl,pinmux-ids = <
 422                                                 MX28_PAD_ENET0_MDC__ENET0_MDC
 423                                                 MX28_PAD_ENET0_MDIO__ENET0_MDIO
 424                                                 MX28_PAD_ENET0_RX_EN__ENET0_RX_EN
 425                                                 MX28_PAD_ENET0_RXD0__ENET0_RXD0
 426                                                 MX28_PAD_ENET0_RXD1__ENET0_RXD1
 427                                                 MX28_PAD_ENET0_TX_EN__ENET0_TX_EN
 428                                                 MX28_PAD_ENET0_TXD0__ENET0_TXD0
 429                                                 MX28_PAD_ENET0_TXD1__ENET0_TXD1
 430                                                 MX28_PAD_ENET_CLK__CLKCTRL_ENET
 431                                         >;
 432                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 433                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 434                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 435                                 };
 436
 437                                 mac1_pins_a: mac1@0 {
 438                                         reg = <0>;
 439                                         fsl,pinmux-ids = <
 440                                                 MX28_PAD_ENET0_CRS__ENET1_RX_EN
 441                                                 MX28_PAD_ENET0_RXD2__ENET1_RXD0
 442                                                 MX28_PAD_ENET0_RXD3__ENET1_RXD1
 443                                                 MX28_PAD_ENET0_COL__ENET1_TX_EN
 444                                                 MX28_PAD_ENET0_TXD2__ENET1_TXD0
 445                                                 MX28_PAD_ENET0_TXD3__ENET1_TXD1
 446                                         >;
 447                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 448                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 449                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 450                                 };
 451
 452                                 mmc0_8bit_pins_a: mmc0-8bit@0 {
 453                                         reg = <0>;
 454                                         fsl,pinmux-ids = <
 455                                                 MX28_PAD_SSP0_DATA0__SSP0_D0
 456                                                 MX28_PAD_SSP0_DATA1__SSP0_D1
 457                                                 MX28_PAD_SSP0_DATA2__SSP0_D2
 458                                                 MX28_PAD_SSP0_DATA3__SSP0_D3
 459                                                 MX28_PAD_SSP0_DATA4__SSP0_D4
 460                                                 MX28_PAD_SSP0_DATA5__SSP0_D5
 461                                                 MX28_PAD_SSP0_DATA6__SSP0_D6
 462                                                 MX28_PAD_SSP0_DATA7__SSP0_D7
 463                                                 MX28_PAD_SSP0_CMD__SSP0_CMD
 464                                                 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 465                                                 MX28_PAD_SSP0_SCK__SSP0_SCK
 466                                         >;
 467                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 468                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 469                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 470                                 };
 471
 472                                 mmc0_4bit_pins_a: mmc0-4bit@0 {
 473                                         reg = <0>;
 474                                         fsl,pinmux-ids = <
 475                                                 MX28_PAD_SSP0_DATA0__SSP0_D0
 476                                                 MX28_PAD_SSP0_DATA1__SSP0_D1
 477                                                 MX28_PAD_SSP0_DATA2__SSP0_D2
 478                                                 MX28_PAD_SSP0_DATA3__SSP0_D3
 479                                                 MX28_PAD_SSP0_CMD__SSP0_CMD
 480                                                 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 481                                                 MX28_PAD_SSP0_SCK__SSP0_SCK
 482                                         >;
 483                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 484                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 485                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 486                                 };
 487
 488                                 mmc0_cd_cfg: mmc0-cd-cfg {
 489                                         fsl,pinmux-ids = <
 490                                                 MX28_PAD_SSP0_DETECT__SSP0_CARD_DETECT
 491                                         >;
 492                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 493                                 };
 494
 495                                 mmc0_sck_cfg: mmc0-sck-cfg {
 496                                         fsl,pinmux-ids = <
 497                                                 MX28_PAD_SSP0_SCK__SSP0_SCK
 498                                         >;
 499                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 500                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 501                                 };
 502
 503                                 mmc1_4bit_pins_a: mmc1-4bit@0 {
 504                                         reg = <0>;
 505                                         fsl,pinmux-ids = <
 506                                                 MX28_PAD_GPMI_D00__SSP1_D0
 507                                                 MX28_PAD_GPMI_D01__SSP1_D1
 508                                                 MX28_PAD_GPMI_D02__SSP1_D2
 509                                                 MX28_PAD_GPMI_D03__SSP1_D3
 510                                                 MX28_PAD_GPMI_RDY1__SSP1_CMD
 511                                                 MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
 512                                                 MX28_PAD_GPMI_WRN__SSP1_SCK
 513                                         >;
 514                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 515                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 516                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 517                                 };
 518
 519                                 mmc1_cd_cfg: mmc1-cd-cfg {
 520                                         fsl,pinmux-ids = <
 521                                                 MX28_PAD_GPMI_RDY0__SSP1_CARD_DETECT
 522                                         >;
 523                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 524                                 };
 525
 526                                 mmc1_sck_cfg: mmc1-sck-cfg {
 527                                         fsl,pinmux-ids = <
 528                                                 MX28_PAD_GPMI_WRN__SSP1_SCK
 529                                         >;
 530                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 531                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 532                                 };
 533
 534
 535                                 mmc2_4bit_pins_a: mmc2-4bit@0 {
 536                                         reg = <0>;
 537                                         fsl,pinmux-ids = <
 538                                                 MX28_PAD_SSP0_DATA4__SSP2_D0
 539                                                 MX28_PAD_SSP1_SCK__SSP2_D1
 540                                                 MX28_PAD_SSP1_CMD__SSP2_D2
 541                                                 MX28_PAD_SSP0_DATA5__SSP2_D3
 542                                                 MX28_PAD_SSP0_DATA6__SSP2_CMD
 543                                                 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
 544                                                 MX28_PAD_SSP0_DATA7__SSP2_SCK
 545                                         >;
 546                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 547                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 548                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 549                                 };
 550
 551                                 mmc2_cd_cfg: mmc2-cd-cfg {
 552                                         fsl,pinmux-ids = <
 553                                                 MX28_PAD_AUART1_RX__SSP2_CARD_DETECT
 554                                         >;
 555                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 556                                 };
 557
 558                                 mmc2_sck_cfg: mmc2-sck-cfg {
 559                                         fsl,pinmux-ids = <
 560                                                 MX28_PAD_SSP0_DATA7__SSP2_SCK
 561                                         >;
 562                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 563                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 564                                 };
 565
 566                                 i2c0_pins_a: i2c0@0 {
 567                                         reg = <0>;
 568                                         fsl,pinmux-ids = <
 569                                                 MX28_PAD_I2C0_SCL__I2C0_SCL
 570                                                 MX28_PAD_I2C0_SDA__I2C0_SDA
 571                                         >;
 572                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 573                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 574                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 575                                 };
 576
 577                                 i2c0_pins_b: i2c0@1 {
 578                                         reg = <1>;
 579                                         fsl,pinmux-ids = <
 580                                                 MX28_PAD_AUART0_RX__I2C0_SCL
 581                                                 MX28_PAD_AUART0_TX__I2C0_SDA
 582                                         >;
 583                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 584                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 585                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 586                                 };
 587
 588                                 i2c1_pins_a: i2c1@0 {
 589                                         reg = <0>;
 590                                         fsl,pinmux-ids = <
 591                                                 MX28_PAD_PWM0__I2C1_SCL
 592                                                 MX28_PAD_PWM1__I2C1_SDA
 593                                         >;
 594                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 595                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 596                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 597                                 };
 598
 599                                 i2c1_pins_b: i2c1@1 {
 600                                         reg = <1>;
 601                                         fsl,pinmux-ids = <
 602                                                 MX28_PAD_AUART2_CTS__I2C1_SCL
 603                                                 MX28_PAD_AUART2_RTS__I2C1_SDA
 604                                         >;
 605                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 606                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 607                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 608                                 };
 609
 610                                 saif0_pins_a: saif0@0 {
 611                                         reg = <0>;
 612                                         fsl,pinmux-ids = <
 613                                                 MX28_PAD_SAIF0_MCLK__SAIF0_MCLK
 614                                                 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
 615                                                 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
 616                                                 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
 617                                         >;
 618                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 619                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 620                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 621                                 };
 622
 623                                 saif0_pins_b: saif0@1 {
 624                                         reg = <1>;
 625                                         fsl,pinmux-ids = <
 626                                                 MX28_PAD_SAIF0_LRCLK__SAIF0_LRCLK
 627                                                 MX28_PAD_SAIF0_BITCLK__SAIF0_BITCLK
 628                                                 MX28_PAD_SAIF0_SDATA0__SAIF0_SDATA0
 629                                         >;
 630                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 631                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 632                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 633                                 };
 634
 635                                 saif1_pins_a: saif1@0 {
 636                                         reg = <0>;
 637                                         fsl,pinmux-ids = <
 638                                                 MX28_PAD_SAIF1_SDATA0__SAIF1_SDATA0
 639                                         >;
 640                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 641                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 642                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 643                                 };
 644
 645                                 pwm0_pins_a: pwm0@0 {
 646                                         reg = <0>;
 647                                         fsl,pinmux-ids = <
 648                                                 MX28_PAD_PWM0__PWM_0
 649                                         >;
 650                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 651                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 652                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 653                                 };
 654
 655                                 pwm2_pins_a: pwm2@0 {
 656                                         reg = <0>;
 657                                         fsl,pinmux-ids = <
 658                                                 MX28_PAD_PWM2__PWM_2
 659                                         >;
 660                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 661                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 662                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 663                                 };
 664
 665                                 pwm3_pins_a: pwm3@0 {
 666                                         reg = <0>;
 667                                         fsl,pinmux-ids = <
 668                                                 MX28_PAD_PWM3__PWM_3
 669                                         >;
 670                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 671                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 672                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 673                                 };
 674
 675                                 pwm3_pins_b: pwm3@1 {
 676                                         reg = <1>;
 677                                         fsl,pinmux-ids = <
 678                                                 MX28_PAD_SAIF0_MCLK__PWM_3
 679                                         >;
 680                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 681                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 682                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 683                                 };
 684
 685                                 pwm4_pins_a: pwm4@0 {
 686                                         reg = <0>;
 687                                         fsl,pinmux-ids = <
 688                                                 MX28_PAD_PWM4__PWM_4
 689                                         >;
 690                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 691                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 692                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 693                                 };
 694
 695                                 lcdif_24bit_pins_a: lcdif-24bit@0 {
 696                                         reg = <0>;
 697                                         fsl,pinmux-ids = <
 698                                                 MX28_PAD_LCD_D00__LCD_D0
 699                                                 MX28_PAD_LCD_D01__LCD_D1
 700                                                 MX28_PAD_LCD_D02__LCD_D2
 701                                                 MX28_PAD_LCD_D03__LCD_D3
 702                                                 MX28_PAD_LCD_D04__LCD_D4
 703                                                 MX28_PAD_LCD_D05__LCD_D5
 704                                                 MX28_PAD_LCD_D06__LCD_D6
 705                                                 MX28_PAD_LCD_D07__LCD_D7
 706                                                 MX28_PAD_LCD_D08__LCD_D8
 707                                                 MX28_PAD_LCD_D09__LCD_D9
 708                                                 MX28_PAD_LCD_D10__LCD_D10
 709                                                 MX28_PAD_LCD_D11__LCD_D11
 710                                                 MX28_PAD_LCD_D12__LCD_D12
 711                                                 MX28_PAD_LCD_D13__LCD_D13
 712                                                 MX28_PAD_LCD_D14__LCD_D14
 713                                                 MX28_PAD_LCD_D15__LCD_D15
 714                                                 MX28_PAD_LCD_D16__LCD_D16
 715                                                 MX28_PAD_LCD_D17__LCD_D17
 716                                                 MX28_PAD_LCD_D18__LCD_D18
 717                                                 MX28_PAD_LCD_D19__LCD_D19
 718                                                 MX28_PAD_LCD_D20__LCD_D20
 719                                                 MX28_PAD_LCD_D21__LCD_D21
 720                                                 MX28_PAD_LCD_D22__LCD_D22
 721                                                 MX28_PAD_LCD_D23__LCD_D23
 722                                         >;
 723                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 724                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 725                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 726                                 };
 727
 728                                 lcdif_18bit_pins_a: lcdif-18bit@0 {
 729                                         reg = <0>;
 730                                         fsl,pinmux-ids = <
 731                                                 MX28_PAD_LCD_D00__LCD_D0
 732                                                 MX28_PAD_LCD_D01__LCD_D1
 733                                                 MX28_PAD_LCD_D02__LCD_D2
 734                                                 MX28_PAD_LCD_D03__LCD_D3
 735                                                 MX28_PAD_LCD_D04__LCD_D4
 736                                                 MX28_PAD_LCD_D05__LCD_D5
 737                                                 MX28_PAD_LCD_D06__LCD_D6
 738                                                 MX28_PAD_LCD_D07__LCD_D7
 739                                                 MX28_PAD_LCD_D08__LCD_D8
 740                                                 MX28_PAD_LCD_D09__LCD_D9
 741                                                 MX28_PAD_LCD_D10__LCD_D10
 742                                                 MX28_PAD_LCD_D11__LCD_D11
 743                                                 MX28_PAD_LCD_D12__LCD_D12
 744                                                 MX28_PAD_LCD_D13__LCD_D13
 745                                                 MX28_PAD_LCD_D14__LCD_D14
 746                                                 MX28_PAD_LCD_D15__LCD_D15
 747                                                 MX28_PAD_LCD_D16__LCD_D16
 748                                                 MX28_PAD_LCD_D17__LCD_D17
 749                                         >;
 750                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 751                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 752                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 753                                 };
 754
 755                                 lcdif_16bit_pins_a: lcdif-16bit@0 {
 756                                         reg = <0>;
 757                                         fsl,pinmux-ids = <
 758                                                 MX28_PAD_LCD_D00__LCD_D0
 759                                                 MX28_PAD_LCD_D01__LCD_D1
 760                                                 MX28_PAD_LCD_D02__LCD_D2
 761                                                 MX28_PAD_LCD_D03__LCD_D3
 762                                                 MX28_PAD_LCD_D04__LCD_D4
 763                                                 MX28_PAD_LCD_D05__LCD_D5
 764                                                 MX28_PAD_LCD_D06__LCD_D6
 765                                                 MX28_PAD_LCD_D07__LCD_D7
 766                                                 MX28_PAD_LCD_D08__LCD_D8
 767                                                 MX28_PAD_LCD_D09__LCD_D9
 768                                                 MX28_PAD_LCD_D10__LCD_D10
 769                                                 MX28_PAD_LCD_D11__LCD_D11
 770                                                 MX28_PAD_LCD_D12__LCD_D12
 771                                                 MX28_PAD_LCD_D13__LCD_D13
 772                                                 MX28_PAD_LCD_D14__LCD_D14
 773                                                 MX28_PAD_LCD_D15__LCD_D15
 774                                         >;
 775                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 776                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 777                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 778                                 };
 779
 780                                 lcdif_sync_pins_a: lcdif-sync@0 {
 781                                         reg = <0>;
 782                                         fsl,pinmux-ids = <
 783                                                 MX28_PAD_LCD_RS__LCD_DOTCLK
 784                                                 MX28_PAD_LCD_CS__LCD_ENABLE
 785                                                 MX28_PAD_LCD_RD_E__LCD_VSYNC
 786                                                 MX28_PAD_LCD_WR_RWN__LCD_HSYNC
 787                                         >;
 788                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 789                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 790                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 791                                 };
 792
 793                                 can0_pins_a: can0@0 {
 794                                         reg = <0>;
 795                                         fsl,pinmux-ids = <
 796                                                 MX28_PAD_GPMI_RDY2__CAN0_TX
 797                                                 MX28_PAD_GPMI_RDY3__CAN0_RX
 798                                         >;
 799                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 800                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 801                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 802                                 };
 803
 804                                 can1_pins_a: can1@0 {
 805                                         reg = <0>;
 806                                         fsl,pinmux-ids = <
 807                                                 MX28_PAD_GPMI_CE2N__CAN1_TX
 808                                                 MX28_PAD_GPMI_CE3N__CAN1_RX
 809                                         >;
 810                                         fsl,drive-strength = <MXS_DRIVE_4mA>;
 811                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 812                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 813                                 };
 814
 815                                 spi2_pins_a: spi2@0 {
 816                                         reg = <0>;
 817                                         fsl,pinmux-ids = <
 818                                                 MX28_PAD_SSP2_SCK__SSP2_SCK
 819                                                 MX28_PAD_SSP2_MOSI__SSP2_CMD
 820                                                 MX28_PAD_SSP2_MISO__SSP2_D0
 821                                                 MX28_PAD_SSP2_SS0__SSP2_D3
 822                                         >;
 823                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 824                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 825                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 826                                 };
 827
 828                                 spi3_pins_a: spi3@0 {
 829                                         reg = <0>;
 830                                         fsl,pinmux-ids = <
 831                                                 MX28_PAD_AUART2_RX__SSP3_D4
 832                                                 MX28_PAD_AUART2_TX__SSP3_D5
 833                                                 MX28_PAD_SSP3_SCK__SSP3_SCK
 834                                                 MX28_PAD_SSP3_MOSI__SSP3_CMD
 835                                                 MX28_PAD_SSP3_MISO__SSP3_D0
 836                                                 MX28_PAD_SSP3_SS0__SSP3_D3
 837                                         >;
 838                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 839                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 840                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 841                                 };
 842
 843                                 spi3_pins_b: spi3@1 {
 844                                         reg = <1>;
 845                                         fsl,pinmux-ids = <
 846                                                 MX28_PAD_SSP3_SCK__SSP3_SCK
 847                                                 MX28_PAD_SSP3_MOSI__SSP3_CMD
 848                                                 MX28_PAD_SSP3_MISO__SSP3_D0
 849                                                 MX28_PAD_SSP3_SS0__SSP3_D3
 850                                         >;
 851                                         fsl,drive-strength = <MXS_DRIVE_8mA>;
 852                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 853                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 854                                 };
 855
 856                                 usb0_pins_a: usb0@0 {
 857                                         reg = <0>;
 858                                         fsl,pinmux-ids = <
 859                                                 MX28_PAD_SSP2_SS2__USB0_OVERCURRENT
 860                                         >;
 861                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 862                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 863                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 864                                 };
 865
 866                                 usb0_pins_b: usb0@1 {
 867                                         reg = <1>;
 868                                         fsl,pinmux-ids = <
 869                                                 MX28_PAD_AUART1_CTS__USB0_OVERCURRENT
 870                                         >;
 871                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 872                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 873                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 874                                 };
 875
 876                                 usb1_pins_a: usb1@0 {
 877                                         reg = <0>;
 878                                         fsl,pinmux-ids = <
 879                                                 MX28_PAD_SSP2_SS1__USB1_OVERCURRENT
 880                                         >;
 881                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 882                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 883                                         fsl,pull-up = <MXS_PULL_DISABLE>;
 884                                 };
 885
 886                                 usb0_id_pins_a: usb0id@0 {
 887                                         reg = <0>;
 888                                         fsl,pinmux-ids = <
 889                                                 MX28_PAD_AUART1_RTS__USB0_ID
 890                                         >;
 891                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 892                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 893                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 894                                 };
 895
 896                                 usb0_id_pins_b: usb0id1@0 {
 897                                         reg = <0>;
 898                                         fsl,pinmux-ids = <
 899                                                 MX28_PAD_PWM2__USB0_ID
 900                                         >;
 901                                         fsl,drive-strength = <MXS_DRIVE_12mA>;
 902                                         fsl,voltage = <MXS_VOLTAGE_HIGH>;
 903                                         fsl,pull-up = <MXS_PULL_ENABLE>;
 904                                 };
 905
 906                         };
 907
 908                         digctl: digctl@8001c000 {
 909                                 compatible = "fsl,imx28-digctl", "fsl,imx23-digctl";
 910                                 reg = <0x8001c000 0x2000>;
 911                                 interrupts = <89>;
 912                                 status = "disabled";
 913                         };
 914
 915                         etm: etm@80022000 {
 916                                 reg = <0x80022000 0x2000>;
 917                                 status = "disabled";
 918                         };
 919
 920                         dma_apbx: dma-apbx@80024000 {
 921                                 compatible = "fsl,imx28-dma-apbx";
 922                                 reg = <0x80024000 0x2000>;
 923                                 interrupts = <78 79 66 0
 924                                               80 81 68 69
 925                                               70 71 72 73
 926                                               74 75 76 77>;
 927                                 interrupt-names = "auart4-rx", "auart4-tx", "spdif-tx", "empty",
 928                                                   "saif0", "saif1", "i2c0", "i2c1",
 929                                                   "auart0-rx", "auart0-tx", "auart1-rx", "auart1-tx",
 930                                                   "auart2-rx", "auart2-tx", "auart3-rx", "auart3-tx";
 931                                 #dma-cells = <1>;
 932                                 dma-channels = <16>;
 933                                 clocks = <&clks 26>;
 934                         };
 935
 936                         dcp: dcp@80028000 {
 937                                 compatible = "fsl,imx28-dcp", "fsl,imx23-dcp";
 938                                 reg = <0x80028000 0x2000>;
 939                                 interrupts = <52 53 54>;
 940                                 status = "okay";
 941                         };
 942
 943                         pxp: pxp@8002a000 {
 944                                 reg = <0x8002a000 0x2000>;
 945                                 interrupts = <39>;
 946                                 status = "disabled";
 947                         };
 948
 949                         ocotp: ocotp@8002c000 {
 950                                 compatible = "fsl,imx28-ocotp", "fsl,ocotp";
 951                                 #address-cells = <1>;
 952                                 #size-cells = <1>;
 953                                 reg = <0x8002c000 0x2000>;
 954                                 clocks = <&clks 25>;
 955                         };
 956
 957                         axi-ahb@8002e000 {
 958                                 reg = <0x8002e000 0x2000>;
 959                                 status = "disabled";
 960                         };
 961
 962                         lcdif: lcdif@80030000 {
 963                                 compatible = "fsl,imx28-lcdif";
 964                                 reg = <0x80030000 0x2000>;
 965                                 interrupts = <38>;
 966                                 clocks = <&clks 55>;
 967                                 dmas = <&dma_apbh 13>;
 968                                 dma-names = "rx";
 969                                 status = "disabled";
 970                         };
 971
 972                         can0: can@80032000 {
 973                                 compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
 974                                 reg = <0x80032000 0x2000>;
 975                                 interrupts = <8>;
 976                                 clocks = <&clks 58>, <&clks 58>;
 977                                 clock-names = "ipg", "per";
 978                                 status = "disabled";
 979                         };
 980
 981                         can1: can@80034000 {
 982                                 compatible = "fsl,imx28-flexcan", "fsl,p1010-flexcan";
 983                                 reg = <0x80034000 0x2000>;
 984                                 interrupts = <9>;
 985                                 clocks = <&clks 59>, <&clks 59>;
 986                                 clock-names = "ipg", "per";
 987                                 status = "disabled";
 988                         };
 989
 990                         simdbg: simdbg@8003c000 {
 991                                 reg = <0x8003c000 0x200>;
 992                                 status = "disabled";
 993                         };
 994
 995                         simgpmisel: simgpmisel@8003c200 {
 996                                 reg = <0x8003c200 0x100>;
 997                                 status = "disabled";
 998                         };
 999
1000                         simsspsel: simsspsel@8003c300 {
1001                                 reg = <0x8003c300 0x100>;
1002                                 status = "disabled";
1003                         };
1004
1005                         simmemsel: simmemsel@8003c400 {
1006                                 reg = <0x8003c400 0x100>;
1007                                 status = "disabled";
1008                         };
1009
1010                         gpiomon: gpiomon@8003c500 {
1011                                 reg = <0x8003c500 0x100>;
1012                                 status = "disabled";
1013                         };
1014
1015                         simenet: simenet@8003c700 {
1016                                 reg = <0x8003c700 0x100>;
1017                                 status = "disabled";
1018                         };
1019
1020                         armjtag: armjtag@8003c800 {
1021                                 reg = <0x8003c800 0x100>;
1022                                 status = "disabled";
1023                         };
1024                 };
1025
1026                 apbx@80040000 {
1027                         compatible = "simple-bus";
1028                         #address-cells = <1>;
1029                         #size-cells = <1>;
1030                         reg = <0x80040000 0x40000>;
1031                         ranges;
1032
1033                         clks: clkctrl@80040000 {
1034                                 compatible = "fsl,imx28-clkctrl", "fsl,clkctrl";
1035                                 reg = <0x80040000 0x2000>;
1036                                 #clock-cells = <1>;
1037                         };
1038
1039                         saif0: saif@80042000 {
1040                                 compatible = "fsl,imx28-saif";
1041                                 reg = <0x80042000 0x2000>;
1042                                 interrupts = <59>;
1043                                 #clock-cells = <0>;
1044                                 clocks = <&clks 53>;
1045                                 dmas = <&dma_apbx 4>;
1046                                 dma-names = "rx-tx";
1047                                 status = "disabled";
1048                         };
1049
1050                         power: power@80044000 {
1051                                 reg = <0x80044000 0x2000>;
1052                                 status = "disabled";
1053                         };
1054
1055                         saif1: saif@80046000 {
1056                                 compatible = "fsl,imx28-saif";
1057                                 reg = <0x80046000 0x2000>;
1058                                 interrupts = <58>;
1059                                 clocks = <&clks 54>;
1060                                 dmas = <&dma_apbx 5>;
1061                                 dma-names = "rx-tx";
1062                                 status = "disabled";
1063                         };
1064
1065                         lradc: lradc@80050000 {
1066                                 compatible = "fsl,imx28-lradc";
1067                                 reg = <0x80050000 0x2000>;
1068                                 interrupts = <10 14 15 16 17 18 19
1069                                                 20 21 22 23 24 25>;
1070                                 status = "disabled";
1071                                 clocks = <&clks 41>;
1072                                 #io-channel-cells = <1>;
1073                         };
1074
1075                         spdif: spdif@80054000 {
1076                                 reg = <0x80054000 0x2000>;
1077                                 interrupts = <45>;
1078                                 dmas = <&dma_apbx 2>;
1079                                 dma-names = "tx";
1080                                 status = "disabled";
1081                         };
1082
1083                         mxs_rtc: rtc@80056000 {
1084                                 compatible = "fsl,imx28-rtc", "fsl,stmp3xxx-rtc";
1085                                 reg = <0x80056000 0x2000>;
1086                                 interrupts = <29>;
1087                         };
1088
1089                         i2c0: i2c@80058000 {
1090                                 #address-cells = <1>;
1091                                 #size-cells = <0>;
1092                                 compatible = "fsl,imx28-i2c";
1093                                 reg = <0x80058000 0x2000>;
1094                                 interrupts = <111>;
1095                                 clock-frequency = <100000>;
1096                                 dmas = <&dma_apbx 6>;
1097                                 dma-names = "rx-tx";
1098                                 status = "disabled";
1099                         };
1100
1101                         i2c1: i2c@8005a000 {
1102                                 #address-cells = <1>;
1103                                 #size-cells = <0>;
1104                                 compatible = "fsl,imx28-i2c";
1105                                 reg = <0x8005a000 0x2000>;
1106                                 interrupts = <110>;
1107                                 clock-frequency = <100000>;
1108                                 dmas = <&dma_apbx 7>;
1109                                 dma-names = "rx-tx";
1110                                 status = "disabled";
1111                         };
1112
1113                         pwm: pwm@80064000 {
1114                                 compatible = "fsl,imx28-pwm", "fsl,imx23-pwm";
1115                                 reg = <0x80064000 0x2000>;
1116                                 clocks = <&clks 44>;
1117                                 #pwm-cells = <2>;
1118                                 fsl,pwm-number = <8>;
1119                                 status = "disabled";
1120                         };
1121
1122                         timer: timrot@80068000 {
1123                                 compatible = "fsl,imx28-timrot", "fsl,timrot";
1124                                 reg = <0x80068000 0x2000>;
1125                                 interrupts = <48 49 50 51>;
1126                                 clocks = <&clks 26>;
1127                         };
1128
1129                         auart0: serial@8006a000 {
1130                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1131                                 reg = <0x8006a000 0x2000>;
1132                                 interrupts = <112>;
1133                                 dmas = <&dma_apbx 8>, <&dma_apbx 9>;
1134                                 dma-names = "rx", "tx";
1135                                 clocks = <&clks 45>;
1136                                 status = "disabled";
1137                         };
1138
1139                         auart1: serial@8006c000 {
1140                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1141                                 reg = <0x8006c000 0x2000>;
1142                                 interrupts = <113>;
1143                                 dmas = <&dma_apbx 10>, <&dma_apbx 11>;
1144                                 dma-names = "rx", "tx";
1145                                 clocks = <&clks 45>;
1146                                 status = "disabled";
1147                         };
1148
1149                         auart2: serial@8006e000 {
1150                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1151                                 reg = <0x8006e000 0x2000>;
1152                                 interrupts = <114>;
1153                                 dmas = <&dma_apbx 12>, <&dma_apbx 13>;
1154                                 dma-names = "rx", "tx";
1155                                 clocks = <&clks 45>;
1156                                 status = "disabled";
1157                         };
1158
1159                         auart3: serial@80070000 {
1160                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1161                                 reg = <0x80070000 0x2000>;
1162                                 interrupts = <115>;
1163                                 dmas = <&dma_apbx 14>, <&dma_apbx 15>;
1164                                 dma-names = "rx", "tx";
1165                                 clocks = <&clks 45>;
1166                                 status = "disabled";
1167                         };
1168
1169                         auart4: serial@80072000 {
1170                                 compatible = "fsl,imx28-auart", "fsl,imx23-auart";
1171                                 reg = <0x80072000 0x2000>;
1172                                 interrupts = <116>;
1173                                 dmas = <&dma_apbx 0>, <&dma_apbx 1>;
1174                                 dma-names = "rx", "tx";
1175                                 clocks = <&clks 45>;
1176                                 status = "disabled";
1177                         };
1178
1179                         duart: serial@80074000 {
1180                                 compatible = "arm,pl011", "arm,primecell";
1181                                 reg = <0x80074000 0x1000>;
1182                                 interrupts = <47>;
1183                                 clocks = <&clks 45>, <&clks 26>;
1184                                 clock-names = "uart", "apb_pclk";
1185                                 status = "disabled";
1186                         };
1187
1188                         usbphy0: usbphy@8007c000 {
1189                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1190                                 reg = <0x8007c000 0x2000>;
1191                                 clocks = <&clks 62>;
1192                                 status = "disabled";
1193                         };
1194
1195                         usbphy1: usbphy@8007e000 {
1196                                 compatible = "fsl,imx28-usbphy", "fsl,imx23-usbphy";
1197                                 reg = <0x8007e000 0x2000>;
1198                                 clocks = <&clks 63>;
1199                                 status = "disabled";
1200                         };
1201                 };
1202         };
1203
1204         ahb@80080000 {
1205                 compatible = "simple-bus";
1206                 #address-cells = <1>;
1207                 #size-cells = <1>;
1208                 reg = <0x80080000 0x80000>;
1209                 ranges;
1210
1211                 usb0: usb@80080000 {
1212                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1213                         reg = <0x80080000 0x10000>;
1214                         interrupts = <93>;
1215                         clocks = <&clks 60>;
1216                         fsl,usbphy = <&usbphy0>;
1217                         status = "disabled";
1218                 };
1219
1220                 usb1: usb@80090000 {
1221                         compatible = "fsl,imx28-usb", "fsl,imx27-usb";
1222                         reg = <0x80090000 0x10000>;
1223                         interrupts = <92>;
1224                         clocks = <&clks 61>;
1225                         fsl,usbphy = <&usbphy1>;
1226                         dr_mode = "host";
1227                         status = "disabled";
1228                 };
1229
1230                 dflpt: dflpt@800c0000 {
1231                         reg = <0x800c0000 0x10000>;
1232                         status = "disabled";
1233                 };
1234
1235                 mac0: ethernet@800f0000 {
1236                         compatible = "fsl,imx28-fec";
1237                         reg = <0x800f0000 0x4000>;
1238                         interrupts = <101>;
1239                         clocks = <&clks 57>, <&clks 57>, <&clks 64>;
1240                         clock-names = "ipg", "ahb", "enet_out";
1241                         status = "disabled";
1242                 };
1243
1244                 mac1: ethernet@800f4000 {
1245                         compatible = "fsl,imx28-fec";
1246                         reg = <0x800f4000 0x4000>;
1247                         interrupts = <102>;
1248                         clocks = <&clks 57>, <&clks 57>;
1249                         clock-names = "ipg", "ahb";
1250                         status = "disabled";
1251                 };
1252
1253                 etn_switch: switch@800f8000 {
1254                         reg = <0x800f8000 0x8000>;
1255                         status = "disabled";
1256                 };
1257         };
1258
1259         iio-hwmon {
1260                 compatible = "iio-hwmon";
1261                 io-channels = <&lradc 8>;
1262         };
1263 };