| | 1 | if ARCH_AT91 |
| | 2 | |
| | 3 | config HAVE_AT91_DATAFLASH_CARD |
| | 4 | bool |
| | 5 | |
| | 6 | config HAVE_NAND_ATMEL_BUSWIDTH_16 |
| | 7 | bool |
| | 8 | |
| | 9 | config HAVE_AT91_USART3 |
| | 10 | bool |
| | 11 | |
| | 12 | config HAVE_AT91_USART4 |
| | 13 | bool |
| | 14 | |
| | 15 | config HAVE_AT91_USART5 |
| | 16 | bool |
| | 17 | |
| | 18 | menu "Atmel AT91 System-on-Chip" |
| | 19 | |
| | 20 | choice |
| | 21 | prompt "Atmel AT91 Processor" |
| | 22 | |
| | 23 | config ARCH_AT91RM9200 |
| | 24 | bool "AT91RM9200" |
| | 25 | select CPU_ARM920T |
| | 26 | select GENERIC_CLOCKEVENTS |
| | 27 | select HAVE_AT91_USART3 |
| | 28 | |
| | 29 | config ARCH_AT91SAM9260 |
| | 30 | bool "AT91SAM9260 or AT91SAM9XE" |
| | 31 | select CPU_ARM926T |
| | 32 | select GENERIC_CLOCKEVENTS |
| | 33 | select HAVE_AT91_USART3 |
| | 34 | select HAVE_AT91_USART4 |
| | 35 | select HAVE_AT91_USART5 |
| | 36 | |
| | 37 | config ARCH_AT91SAM9261 |
| | 38 | bool "AT91SAM9261" |
| | 39 | select CPU_ARM926T |
| | 40 | select GENERIC_CLOCKEVENTS |
| | 41 | select HAVE_FB_ATMEL |
| | 42 | |
| | 43 | config ARCH_AT91SAM9G10 |
| | 44 | bool "AT91SAM9G10" |
| | 45 | select CPU_ARM926T |
| | 46 | select GENERIC_CLOCKEVENTS |
| | 47 | select HAVE_FB_ATMEL |
| | 48 | |
| | 49 | config ARCH_AT91SAM9263 |
| | 50 | bool "AT91SAM9263" |
| | 51 | select CPU_ARM926T |
| | 52 | select GENERIC_CLOCKEVENTS |
| | 53 | select HAVE_FB_ATMEL |
| | 54 | |
| | 55 | config ARCH_AT91SAM9RL |
| | 56 | bool "AT91SAM9RL" |
| | 57 | select CPU_ARM926T |
| | 58 | select GENERIC_CLOCKEVENTS |
| | 59 | select HAVE_AT91_USART3 |
| | 60 | select HAVE_FB_ATMEL |
| | 61 | |
| | 62 | config ARCH_AT91SAM9G20 |
| | 63 | bool "AT91SAM9G20" |
| | 64 | select CPU_ARM926T |
| | 65 | select GENERIC_CLOCKEVENTS |
| | 66 | select HAVE_AT91_USART3 |
| | 67 | select HAVE_AT91_USART4 |
| | 68 | select HAVE_AT91_USART5 |
| | 69 | |
| | 70 | config ARCH_AT91SAM9G45 |
| | 71 | bool "AT91SAM9G45" |
| | 72 | select CPU_ARM926T |
| | 73 | select GENERIC_CLOCKEVENTS |
| | 74 | select HAVE_AT91_USART3 |
| | 75 | select HAVE_FB_ATMEL |
| | 76 | |
| | 77 | config ARCH_AT91CAP9 |
| | 78 | bool "AT91CAP9" |
| | 79 | select CPU_ARM926T |
| | 80 | select GENERIC_CLOCKEVENTS |
| | 81 | select HAVE_FB_ATMEL |
| | 82 | |
| | 83 | config ARCH_AT572D940HF |
| | 84 | bool "AT572D940HF" |
| | 85 | select CPU_ARM926T |
| | 86 | select GENERIC_CLOCKEVENTS |
| | 87 | |
| | 88 | config ARCH_AT91X40 |
| | 89 | bool "AT91x40" |
| | 90 | select ARCH_USES_GETTIMEOFFSET |
| | 91 | |
| | 92 | endchoice |
| | 93 | |
| | 94 | config AT91_PMC_UNIT |
| | 95 | bool |
| | 96 | default !ARCH_AT91X40 |
| | 97 | |
| | 98 | # ---------------------------------------------------------- |
| | 99 | |
| | 100 | if ARCH_AT91RM9200 |
| | 101 | |
| | 102 | comment "AT91RM9200 Board Type" |
| | 103 | |
| | 104 | config MACH_ONEARM |
| | 105 | bool "Ajeco 1ARM Single Board Computer" |
| | 106 | help |
| | 107 | Select this if you are using Ajeco's 1ARM Single Board Computer. |
| | 108 | <http://www.ajeco.fi/products.htm> |
| | 109 | |
| | 110 | config ARCH_AT91RM9200DK |
| | 111 | bool "Atmel AT91RM9200-DK Development board" |
| | 112 | select HAVE_AT91_DATAFLASH_CARD |
| | 113 | help |
| | 114 | Select this if you are using Atmel's AT91RM9200-DK Development board. |
| | 115 | (Discontinued) |
| | 116 | |
| | 117 | config MACH_AT91RM9200EK |
| | 118 | bool "Atmel AT91RM9200-EK Evaluation Kit" |
| | 119 | select HAVE_AT91_DATAFLASH_CARD |
| | 120 | help |
| | 121 | Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit. |
| | 122 | <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507> |
| | 123 | |
| | 124 | config MACH_CSB337 |
| | 125 | bool "Cogent CSB337" |
| | 126 | help |
| | 127 | Select this if you are using Cogent's CSB337 board. |
| | 128 | <http://www.cogcomp.com/csb_csb337.htm> |
| | 129 | |
| | 130 | config MACH_CSB637 |
| | 131 | bool "Cogent CSB637" |
| | 132 | help |
| | 133 | Select this if you are using Cogent's CSB637 board. |
| | 134 | <http://www.cogcomp.com/csb_csb637.htm> |
| | 135 | |
| | 136 | config MACH_CARMEVA |
| | 137 | bool "Conitec ARM&EVA" |
| | 138 | help |
| | 139 | Select this if you are using Conitec's AT91RM9200-MCU-Module. |
| | 140 | <http://www.conitec.net/english/linuxboard.htm> |
| | 141 | |
| | 142 | config MACH_ATEB9200 |
| | 143 | bool "Embest ATEB9200" |
| | 144 | help |
| | 145 | Select this if you are using Embest's ATEB9200 board. |
| | 146 | <http://www.embedinfo.com/english/product/ATEB9200.asp> |
| | 147 | |
| | 148 | config MACH_KB9200 |
| | 149 | bool "KwikByte KB920x" |
| | 150 | help |
| | 151 | Select this if you are using KwikByte's KB920x board. |
| | 152 | <http://kwikbyte.com/KB9202_description_new.htm> |
| | 153 | |
| | 154 | config MACH_PICOTUX2XX |
| | 155 | bool "picotux 200" |
| | 156 | help |
| | 157 | Select this if you are using a picotux 200. |
| | 158 | <http://www.picotux.com/> |
| | 159 | |
| | 160 | config MACH_KAFA |
| | 161 | bool "Sperry-Sun KAFA board" |
| | 162 | help |
| | 163 | Select this if you are using Sperry-Sun's KAFA board. |
| | 164 | |
| | 165 | config MACH_ECBAT91 |
| | 166 | bool "emQbit ECB_AT91 SBC" |
| | 167 | select HAVE_AT91_DATAFLASH_CARD |
| | 168 | help |
| | 169 | Select this if you are using emQbit's ECB_AT91 board. |
| | 170 | <http://wiki.emqbit.com/free-ecb-at91> |
| | 171 | |
| | 172 | config MACH_YL9200 |
| | 173 | bool "ucDragon YL-9200" |
| | 174 | help |
| | 175 | Select this if you are using the ucDragon YL-9200 board. |
| | 176 | |
| | 177 | config MACH_CPUAT91 |
| | 178 | bool "Eukrea CPUAT91" |
| | 179 | help |
| | 180 | Select this if you are using the Eukrea Electromatique's |
| | 181 | CPUAT91 board <http://www.eukrea.com/>. |
| | 182 | |
| | 183 | config MACH_ECO920 |
| | 184 | bool "eco920" |
| | 185 | help |
| | 186 | Select this if you are using the eco920 board |
| | 187 | |
| | 188 | endif |
| | 189 | |
| | 190 | # ---------------------------------------------------------- |
| | 191 | |
| | 192 | if ARCH_AT91SAM9260 |
| | 193 | |
| | 194 | comment "AT91SAM9260 Variants" |
| | 195 | |
| | 196 | config ARCH_AT91SAM9260_SAM9XE |
| | 197 | bool "AT91SAM9XE" |
| | 198 | help |
| | 199 | Select this if you are using Atmel's AT91SAM9XE System-on-Chip. |
| | 200 | They are basically AT91SAM9260s with various sizes of embedded Flash. |
| | 201 | |
| | 202 | comment "AT91SAM9260 / AT91SAM9XE Board Type" |
| | 203 | |
| | 204 | config MACH_AT91SAM9260EK |
| | 205 | bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit" |
| | 206 | select HAVE_AT91_DATAFLASH_CARD |
| | 207 | select HAVE_NAND_ATMEL_BUSWIDTH_16 |
| | 208 | help |
| | 209 | Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit |
| | 210 | <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933> |
| | 211 | |
| | 212 | config MACH_CAM60 |
| | 213 | bool "KwikByte KB9260 (CAM60) board" |
| | 214 | help |
| | 215 | Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260. |
| | 216 | <http://www.kwikbyte.com/KB9260.html> |
| | 217 | |
| | 218 | config MACH_SAM9_L9260 |
| | 219 | bool "Olimex SAM9-L9260 board" |
| | 220 | select HAVE_AT91_DATAFLASH_CARD |
| | 221 | help |
| | 222 | Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260. |
| | 223 | <http://www.olimex.com/dev/sam9-L9260.html> |
| | 224 | |
| | 225 | config MACH_AFEB9260 |
| | 226 | bool "Custom afeb9260 board v1" |
| | 227 | help |
| | 228 | Select this if you are using custom afeb9260 board based on |
| | 229 | open hardware design. Select this for revision 1 of the board. |
| | 230 | <svn://194.85.238.22/home/users/george/svn/arm9eb> |
| | 231 | <http://groups.google.com/group/arm9fpga-evolution-board> |
| | 232 | |
| | 233 | config MACH_USB_A9260 |
| | 234 | bool "CALAO USB-A9260" |
| | 235 | help |
| | 236 | Select this if you are using a Calao Systems USB-A9260. |
| | 237 | <http://www.calao-systems.com> |
| | 238 | |
| | 239 | config MACH_QIL_A9260 |
| | 240 | bool "CALAO QIL-A9260 board" |
| | 241 | help |
| | 242 | Select this if you are using a Calao Systems QIL-A9260 Board. |
| | 243 | <http://www.calao-systems.com> |
| | 244 | |
| | 245 | config MACH_CPU9260 |
| | 246 | bool "Eukrea CPU9260 board" |
| | 247 | help |
| | 248 | Select this if you are using a Eukrea Electromatique's |
| | 249 | CPU9260 Board <http://www.eukrea.com/> |
| | 250 | |
| | 251 | endif |
| | 252 | |
| | 253 | # ---------------------------------------------------------- |
| | 254 | |
| | 255 | if ARCH_AT91SAM9261 |
| | 256 | |
| | 257 | comment "AT91SAM9261 Board Type" |
| | 258 | |
| | 259 | config MACH_AT91SAM9261EK |
| | 260 | bool "Atmel AT91SAM9261-EK Evaluation Kit" |
| | 261 | select HAVE_AT91_DATAFLASH_CARD |
| | 262 | select HAVE_NAND_ATMEL_BUSWIDTH_16 |
| | 263 | help |
| | 264 | Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit. |
| | 265 | <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820> |
| | 266 | |
| | 267 | endif |
| | 268 | |
| | 269 | # ---------------------------------------------------------- |
| | 270 | |
| | 271 | if ARCH_AT91SAM9G10 |
| | 272 | |
| | 273 | comment "AT91SAM9G10 Board Type" |
| | 274 | |
| | 275 | config MACH_AT91SAM9G10EK |
| | 276 | bool "Atmel AT91SAM9G10-EK Evaluation Kit" |
| | 277 | select HAVE_AT91_DATAFLASH_CARD |
| | 278 | select HAVE_NAND_ATMEL_BUSWIDTH_16 |
| | 279 | help |
| | 280 | Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit. |
| | 281 | <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588> |
| | 282 | |
| | 283 | endif |
| | 284 | |
| | 285 | # ---------------------------------------------------------- |
| | 286 | |
| | 287 | if ARCH_AT91SAM9263 |
| | 288 | |
| | 289 | comment "AT91SAM9263 Board Type" |
| | 290 | |
| | 291 | config MACH_AT91SAM9263EK |
| | 292 | bool "Atmel AT91SAM9263-EK Evaluation Kit" |
| | 293 | select HAVE_AT91_DATAFLASH_CARD |
| | 294 | select HAVE_NAND_ATMEL_BUSWIDTH_16 |
| | 295 | help |
| | 296 | Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. |
| | 297 | <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057> |
| | 298 | |
| | 299 | config MACH_USB_A9263 |
| | 300 | bool "CALAO USB-A9263" |
| | 301 | help |
| | 302 | Select this if you are using a Calao Systems USB-A9263. |
| | 303 | <http://www.calao-systems.com> |
| | 304 | |
| | 305 | config MACH_NEOCORE926 |
| | 306 | bool "Adeneo NEOCORE926" |
| | 307 | select HAVE_AT91_DATAFLASH_CARD |
| | 308 | help |
| | 309 | Select this if you are using the Adeneo Neocore 926 board. |
| | 310 | |
| | 311 | endif |
| | 312 | |
| | 313 | # ---------------------------------------------------------- |
| | 314 | |
| | 315 | if ARCH_AT91SAM9RL |
| | 316 | |
| | 317 | comment "AT91SAM9RL Board Type" |
| | 318 | |
| | 319 | config MACH_AT91SAM9RLEK |
| | 320 | bool "Atmel AT91SAM9RL-EK Evaluation Kit" |
| | 321 | help |
| | 322 | Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit. |
| | 323 | |
| | 324 | endif |
| | 325 | |
| | 326 | # ---------------------------------------------------------- |
| | 327 | |
| | 328 | if ARCH_AT91SAM9G20 |
| | 329 | |
| | 330 | comment "AT91SAM9G20 Board Type" |
| | 331 | |
| | 332 | config MACH_AT91SAM9G20EK |
| | 333 | bool "Atmel AT91SAM9G20-EK Evaluation Kit" |
| | 334 | select HAVE_AT91_DATAFLASH_CARD |
| | 335 | select HAVE_NAND_ATMEL_BUSWIDTH_16 |
| | 336 | help |
| | 337 | Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit |
| | 338 | that embeds only one SD/MMC slot. |
| | 339 | |
| | 340 | config MACH_AT91SAM9G20EK_2MMC |
| | 341 | bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots" |
| | 342 | select HAVE_NAND_ATMEL_BUSWIDTH_16 |
| | 343 | help |
| | 344 | Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit |
| | 345 | with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and |
| | 346 | onwards. |
| | 347 | |
| | 348 | config MACH_CPU9G20 |
| | 349 | bool "Eukrea CPU9G20 board" |
| | 350 | help |
| | 351 | Select this if you are using a Eukrea Electromatique's |
| | 352 | CPU9G20 Board <http://www.eukrea.com/> |
| | 353 | |
| | 354 | config MACH_PORTUXG20 |
| | 355 | bool "taskit PortuxG20" |
| | 356 | help |
| | 357 | Select this if you are using taskit's PortuxG20. |
| | 358 | <http://www.taskit.de/en/> |
| | 359 | |
| | 360 | config MACH_STAMP9G20 |
| | 361 | bool "taskit Stamp9G20 CPU module" |
| | 362 | help |
| | 363 | Select this if you are using taskit's Stamp9G20 CPU module on its |
| | 364 | evaluation board. |
| | 365 | <http://www.taskit.de/en/> |
| | 366 | |
| | 367 | endif |
| | 368 | |
| | 369 | # ---------------------------------------------------------- |
| | 370 | |
| | 371 | if ARCH_AT91SAM9G45 |
| | 372 | |
| | 373 | comment "AT91SAM9G45 Board Type" |
| | 374 | |
| | 375 | config MACH_AT91SAM9G45EKES |
| | 376 | bool "Atmel AT91SAM9G45-EKES Evaluation Kit" |
| | 377 | select HAVE_NAND_ATMEL_BUSWIDTH_16 |
| | 378 | help |
| | 379 | Select this if you are using Atmel's AT91SAM9G45-EKES Evaluation Kit. |
| | 380 | "ES" at the end of the name means that this board is an |
| | 381 | Engineering Sample. |
| | 382 | |
| | 383 | endif |
| | 384 | |
| | 385 | # ---------------------------------------------------------- |
| | 386 | |
| | 387 | if ARCH_AT91CAP9 |
| | 388 | |
| | 389 | comment "AT91CAP9 Board Type" |
| | 390 | |
| | 391 | config MACH_AT91CAP9ADK |
| | 392 | bool "Atmel AT91CAP9A-DK Evaluation Kit" |
| | 393 | select HAVE_AT91_DATAFLASH_CARD |
| | 394 | select HAVE_NAND_ATMEL_BUSWIDTH_16 |
| | 395 | help |
| | 396 | Select this if you are using Atmel's AT91CAP9A-DK Evaluation Kit. |
| | 397 | <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4138> |
| | 398 | |
| | 399 | endif |
| | 400 | |
| | 401 | # ---------------------------------------------------------- |
| | 402 | |
| | 403 | if ARCH_AT572D940HF |
| | 404 | |
| | 405 | comment "AT572D940HF Board Type" |
| | 406 | |
| | 407 | config MACH_AT572D940HFEB |
| | 408 | bool "AT572D940HF-EK" |
| | 409 | depends on ARCH_AT572D940HF |
| | 410 | select HAVE_AT91_DATAFLASH_CARD |
| | 411 | select HAVE_NAND_ATMEL_BUSWIDTH_16 |
| | 412 | help |
| | 413 | Select this if you are using Atmel's AT572D940HF-EK evaluation kit. |
| | 414 | <http://www.atmel.com/products/diopsis/default.asp> |
| | 415 | |
| | 416 | endif |
| | 417 | |
| | 418 | # ---------------------------------------------------------- |
| | 419 | |
| | 420 | if ARCH_AT91X40 |
| | 421 | |
| | 422 | comment "AT91X40 Board Type" |
| | 423 | |
| | 424 | config MACH_AT91EB01 |
| | 425 | bool "Atmel AT91EB01 Evaluation Kit" |
| | 426 | help |
| | 427 | Select this if you are using Atmel's AT91EB01 Evaluation Kit. |
| | 428 | It is also a popular target for simulators such as GDB's |
| | 429 | ARM simulator (commonly known as the ARMulator) and the |
| | 430 | Skyeye simulator. |
| | 431 | |
| | 432 | endif |
| | 433 | |
| | 434 | # ---------------------------------------------------------- |
| | 435 | |
| | 436 | comment "AT91 Board Options" |
| | 437 | |
| | 438 | config MTD_AT91_DATAFLASH_CARD |
| | 439 | bool "Enable DataFlash Card support" |
| | 440 | depends on HAVE_AT91_DATAFLASH_CARD |
| | 441 | help |
| | 442 | Enable support for the DataFlash card. |
| | 443 | |
| | 444 | config MTD_NAND_ATMEL_BUSWIDTH_16 |
| | 445 | bool "Enable 16-bit data bus interface to NAND flash" |
| | 446 | depends on HAVE_NAND_ATMEL_BUSWIDTH_16 |
| | 447 | help |
| | 448 | On AT91SAM926x boards both types of NAND flash can be present |
| | 449 | (8 and 16 bit data bus width). |
| | 450 | |
| | 451 | # ---------------------------------------------------------- |
| | 452 | |
| | 453 | comment "AT91 Feature Selections" |
| | 454 | |
| | 455 | config AT91_PROGRAMMABLE_CLOCKS |
| | 456 | bool "Programmable Clocks" |
| | 457 | help |
| | 458 | Select this if you need to program one or more of the PCK0..PCK3 |
| | 459 | programmable clock outputs. |
| | 460 | |
| | 461 | config AT91_SLOW_CLOCK |
| | 462 | bool "Suspend-to-RAM disables main oscillator" |
| | 463 | depends on SUSPEND |
| | 464 | help |
| | 465 | Select this if you want Suspend-to-RAM to save the most power |
| | 466 | possible (without powering off the CPU) by disabling the PLLs |
| | 467 | and main oscillator so that only the 32 KiHz clock is available. |
| | 468 | |
| | 469 | When only that slow-clock is available, some peripherals lose |
| | 470 | functionality. Many can't issue wakeup events unless faster |
| | 471 | clocks are available. Some lose their operating state and |
| | 472 | need to be completely re-initialized. |
| | 473 | |
| | 474 | config AT91_TIMER_HZ |
| | 475 | int "Kernel HZ (jiffies per second)" |
| | 476 | range 32 1024 |
| | 477 | depends on ARCH_AT91 |
| | 478 | default "128" if ARCH_AT91RM9200 |
| | 479 | default "100" |
| | 480 | help |
| | 481 | On AT91rm9200 chips where you're using a system clock derived |
| | 482 | from the 32768 Hz hardware clock, this tick rate should divide |
| | 483 | it exactly: use a power-of-two value, such as 128 or 256, to |
| | 484 | reduce timing errors caused by rounding. |
| | 485 | |
| | 486 | On AT91sam926x chips, or otherwise when using a higher precision |
| | 487 | system clock (of at least several MHz), rounding is less of a |
| | 488 | problem so it can be safer to use a decimal values like 100. |
| | 489 | |
| | 490 | choice |
| | 491 | prompt "Select a UART for early kernel messages" |
| | 492 | |
| | 493 | config AT91_EARLY_DBGU |
| | 494 | bool "DBGU" |
| | 495 | |
| | 496 | config AT91_EARLY_USART0 |
| | 497 | bool "USART0" |
| | 498 | |
| | 499 | config AT91_EARLY_USART1 |
| | 500 | bool "USART1" |
| | 501 | |
| | 502 | config AT91_EARLY_USART2 |
| | 503 | bool "USART2" |
| | 504 | depends on ! ARCH_AT91X40 |
| | 505 | |
| | 506 | config AT91_EARLY_USART3 |
| | 507 | bool "USART3" |
| | 508 | depends on HAVE_AT91_USART3 |
| | 509 | |
| | 510 | config AT91_EARLY_USART4 |
| | 511 | bool "USART4" |
| | 512 | depends on HAVE_AT91_USART4 |
| | 513 | |
| | 514 | config AT91_EARLY_USART5 |
| | 515 | bool "USART5" |
| | 516 | depends on HAVE_AT91_USART5 |
| | 517 | |
| | 518 | endchoice |
| | 519 | |
| | 520 | endmenu |
| | 521 | |
| | 522 | endif |
projects / linux-2.6-block.git / blame_incremental