[linux-2.6-block.git] / include / linux / usb_usual.h

/*
 * Interface to the libusual.
 *
 * Copyright (c) 2005 Pete Zaitcev <zaitcev@redhat.com>
 * Copyright (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
 * Copyright (c) 1999 Michael Gee (michael@linuxspecific.com)
 */

#ifndef __LINUX_USB_USUAL_H
#define __LINUX_USB_USUAL_H

#include <linux/config.h>

/* We should do this for cleanliness... But other usb_foo.h do not do this. */
/* #include <linux/usb.h> */

/*
 * The flags field, which we store in usb_device_id.driver_info.
 * It is compatible with the old usb-storage flags in lower 24 bits.
 */

/*
 * Static flag definitions.  We use this roundabout technique so that the
 * proc_info() routine can automatically display a message for each flag.
 */
#define US_DO_ALL_FLAGS						\
	US_FLAG(SINGLE_LUN,	0x00000001)			\
		/* allow access to only LUN 0 */		\
	US_FLAG(NEED_OVERRIDE,	0x00000002)			\
		/* unusual_devs entry is necessary */		\
	US_FLAG(SCM_MULT_TARG,	0x00000004)			\
		/* supports multiple targets */			\
	US_FLAG(FIX_INQUIRY,	0x00000008)			\
		/* INQUIRY response needs faking */		\
	US_FLAG(FIX_CAPACITY,	0x00000010)			\
		/* READ CAPACITY response too big */		\
	US_FLAG(IGNORE_RESIDUE,	0x00000020)			\
		/* reported residue is wrong */			\
	US_FLAG(BULK32,		0x00000040)			\
		/* Uses 32-byte CBW length */			\
	US_FLAG(NOT_LOCKABLE,	0x00000080)			\
		/* PREVENT/ALLOW not supported */		\
	US_FLAG(GO_SLOW,	0x00000100)			\
		/* Need delay after Command phase */		\
	US_FLAG(NO_WP_DETECT,	0x00000200)			\
		/* Don't check for write-protect */		\

#define US_FLAG(name, value)	US_FL_##name = value ,
enum { US_DO_ALL_FLAGS };
#undef US_FLAG

/*
 * The bias field for libusual and friends.
 */
#define USB_US_TYPE_NONE   0
#define USB_US_TYPE_STOR   1		/* usb-storage */
#define USB_US_TYPE_UB     2		/* ub */

#define USB_US_TYPE(flags) 		(((flags) >> 24) & 0xFF)
#define USB_US_ORIG_FLAGS(flags)	((flags) & 0x00FFFFFF)

/*
 * This is probably not the best place to keep these constants, conceptually.
 * But it's the only header included into all places which need them.
 */

/* Sub Classes */

#define US_SC_RBC	0x01		/* Typically, flash devices */
#define US_SC_8020	0x02		/* CD-ROM */
#define US_SC_QIC	0x03		/* QIC-157 Tapes */
#define US_SC_UFI	0x04		/* Floppy */
#define US_SC_8070	0x05		/* Removable media */
#define US_SC_SCSI	0x06		/* Transparent */
#define US_SC_ISD200    0x07		/* ISD200 ATA */
#define US_SC_MIN	US_SC_RBC
#define US_SC_MAX	US_SC_ISD200

#define US_SC_DEVICE	0xff		/* Use device's value */

/* Protocols */

#define US_PR_CBI	0x00		/* Control/Bulk/Interrupt */
#define US_PR_CB	0x01		/* Control/Bulk w/o interrupt */
#define US_PR_BULK	0x50		/* bulk only */
#ifdef CONFIG_USB_STORAGE_USBAT
#define US_PR_USBAT	0x80		/* SCM-ATAPI bridge */
#endif
#ifdef CONFIG_USB_STORAGE_SDDR09
#define US_PR_EUSB_SDDR09	0x81	/* SCM-SCSI bridge for SDDR-09 */
#endif
#ifdef CONFIG_USB_STORAGE_SDDR55
#define US_PR_SDDR55	0x82		/* SDDR-55 (made up) */
#endif
#define US_PR_DPCM_USB  0xf0		/* Combination CB/SDDR09 */
#ifdef CONFIG_USB_STORAGE_FREECOM
#define US_PR_FREECOM   0xf1		/* Freecom */
#endif
#ifdef CONFIG_USB_STORAGE_DATAFAB
#define US_PR_DATAFAB   0xf2		/* Datafab chipsets */
#endif
#ifdef CONFIG_USB_STORAGE_JUMPSHOT
#define US_PR_JUMPSHOT  0xf3		/* Lexar Jumpshot */
#endif

#define US_PR_DEVICE	0xff		/* Use device's value */

/*
 */
#ifdef CONFIG_USB_LIBUSUAL

extern struct usb_device_id storage_usb_ids[];
extern void usb_usual_set_present(int type);
extern void usb_usual_clear_present(int type);
extern int usb_usual_check_type(const struct usb_device_id *, int type);
#else

#define usb_usual_set_present(t)	do { } while(0)
#define usb_usual_clear_present(t)	do { } while(0)
#define usb_usual_check_type(id, t)	(0)
#endif /* CONFIG_USB_LIBUSUAL */

#endif /* __LINUX_USB_USUAL_H */
Commit	Line	Data
a00828e9 PZ	1	/*
	2	* Interface to the libusual.
	3	*
	4	* Copyright (c) 2005 Pete Zaitcev <zaitcev@redhat.com>
	5	* Copyright (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
	6	* Copyright (c) 1999 Michael Gee (michael@linuxspecific.com)
	7	*/
	8
	9	#ifndef __LINUX_USB_USUAL_H
	10	#define __LINUX_USB_USUAL_H
	11
	12	#include <linux/config.h>
	13
	14	/* We should do this for cleanliness... But other usb_foo.h do not do this. */
	15	/* #include <linux/usb.h> */
	16
	17	/*
	18	* The flags field, which we store in usb_device_id.driver_info.
	19	* It is compatible with the old usb-storage flags in lower 24 bits.
	20	*/
	21
	22	/*
	23	* Static flag definitions. We use this roundabout technique so that the
	24	* proc_info() routine can automatically display a message for each flag.
	25	*/
	26	#define US_DO_ALL_FLAGS \
	27	US_FLAG(SINGLE_LUN, 0x00000001) \
	28	/* allow access to only LUN 0 */ \
	29	US_FLAG(NEED_OVERRIDE, 0x00000002) \
	30	/* unusual_devs entry is necessary */ \
	31	US_FLAG(SCM_MULT_TARG, 0x00000004) \
	32	/* supports multiple targets */ \
	33	US_FLAG(FIX_INQUIRY, 0x00000008) \
	34	/* INQUIRY response needs faking */ \
	35	US_FLAG(FIX_CAPACITY, 0x00000010) \
	36	/* READ CAPACITY response too big */ \
	37	US_FLAG(IGNORE_RESIDUE, 0x00000020) \
	38	/* reported residue is wrong */ \
	39	US_FLAG(BULK32, 0x00000040) \
	40	/* Uses 32-byte CBW length */ \
	41	US_FLAG(NOT_LOCKABLE, 0x00000080) \
	42	/* PREVENT/ALLOW not supported */ \
	43	US_FLAG(GO_SLOW, 0x00000100) \
	44	/* Need delay after Command phase */ \
	45	US_FLAG(NO_WP_DETECT, 0x00000200) \
	46	/* Don't check for write-protect */ \
	47
	48	#define US_FLAG(name, value) US_FL_##name = value ,
	49	enum { US_DO_ALL_FLAGS };
	50	#undef US_FLAG
	51
	52	/*
	53	* The bias field for libusual and friends.
	54	*/
	55	#define USB_US_TYPE_NONE 0
	56	#define USB_US_TYPE_STOR 1 /* usb-storage */
	57	#define USB_US_TYPE_UB 2 /* ub */
	58
	59	#define USB_US_TYPE(flags) (((flags) >> 24) & 0xFF)
	60	#define USB_US_ORIG_FLAGS(flags) ((flags) & 0x00FFFFFF)
	61
	62	/*
	63	* This is probably not the best place to keep these constants, conceptually.
	64	* But it's the only header included into all places which need them.
65	*/
66
67	/* Sub Classes */
68
69	#define US_SC_RBC 0x01 /* Typically, flash devices */
70	#define US_SC_8020 0x02 /* CD-ROM */
71	#define US_SC_QIC 0x03 /* QIC-157 Tapes */
72	#define US_SC_UFI 0x04 /* Floppy */
73	#define US_SC_8070 0x05 /* Removable media */
74	#define US_SC_SCSI 0x06 /* Transparent */
75	#define US_SC_ISD200 0x07 /* ISD200 ATA */
76	#define US_SC_MIN US_SC_RBC
77	#define US_SC_MAX US_SC_ISD200
78
79	#define US_SC_DEVICE 0xff /* Use device's value */
80
81	/* Protocols */
82
83	#define US_PR_CBI 0x00 /* Control/Bulk/Interrupt */
84	#define US_PR_CB 0x01 /* Control/Bulk w/o interrupt */
85	#define US_PR_BULK 0x50 /* bulk only */
86	#ifdef CONFIG_USB_STORAGE_USBAT
87	#define US_PR_USBAT 0x80 /* SCM-ATAPI bridge */
88	#endif
89	#ifdef CONFIG_USB_STORAGE_SDDR09
90	#define US_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for SDDR-09 */
91	#endif
92	#ifdef CONFIG_USB_STORAGE_SDDR55
93	#define US_PR_SDDR55 0x82 /* SDDR-55 (made up) */
94	#endif
95	#define US_PR_DPCM_USB 0xf0 /* Combination CB/SDDR09 */
96	#ifdef CONFIG_USB_STORAGE_FREECOM
97	#define US_PR_FREECOM 0xf1 /* Freecom */
98	#endif
99	#ifdef CONFIG_USB_STORAGE_DATAFAB
100	#define US_PR_DATAFAB 0xf2 /* Datafab chipsets */
101	#endif
102	#ifdef CONFIG_USB_STORAGE_JUMPSHOT
103	#define US_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */
104	#endif
105
106	#define US_PR_DEVICE 0xff /* Use device's value */
107
108	/*
109	*/
110	#ifdef CONFIG_USB_LIBUSUAL
111
112	extern struct usb_device_id storage_usb_ids[];
113	extern void usb_usual_set_present(int type);
114	extern void usb_usual_clear_present(int type);
115	extern int usb_usual_check_type(const struct usb_device_id *, int type);
116	#else
117
118	#define usb_usual_set_present(t) do { } while(0)
119	#define usb_usual_clear_present(t) do { } while(0)
120	#define usb_usual_check_type(id, t) (0)
121	#endif /* CONFIG_USB_LIBUSUAL */
122
123	#endif /* __LINUX_USB_USUAL_H */