[linux-2.6-block.git] / include / linux / tty_driver.h

#ifndef _LINUX_TTY_DRIVER_H
#define _LINUX_TTY_DRIVER_H

/*
 * This structure defines the interface between the low-level tty
 * driver and the tty routines.  The following routines can be
 * defined; unless noted otherwise, they are optional, and can be
 * filled in with a null pointer.
 *
 * int  (*open)(struct tty_struct * tty, struct file * filp);
 *
 * 	This routine is called when a particular tty device is opened.
 * 	This routine is mandatory; if this routine is not filled in,
 * 	the attempted open will fail with ENODEV.
 *     
 * void (*close)(struct tty_struct * tty, struct file * filp);
 *
 * 	This routine is called when a particular tty device is closed.
 *
 * int (*write)(struct tty_struct * tty,
 * 		 const unsigned char *buf, int count);
 *
 * 	This routine is called by the kernel to write a series of
 * 	characters to the tty device.  The characters may come from
 * 	user space or kernel space.  This routine will return the
 *	number of characters actually accepted for writing.  This
 *	routine is mandatory.
 *
 * void (*put_char)(struct tty_struct *tty, unsigned char ch);
 *
 * 	This routine is called by the kernel to write a single
 * 	character to the tty device.  If the kernel uses this routine,
 * 	it must call the flush_chars() routine (if defined) when it is
 * 	done stuffing characters into the driver.  If there is no room
 * 	in the queue, the character is ignored.
 *
 * void (*flush_chars)(struct tty_struct *tty);
 *
 * 	This routine is called by the kernel after it has written a
 * 	series of characters to the tty device using put_char().  
 * 
 * int  (*write_room)(struct tty_struct *tty);
 *
 * 	This routine returns the numbers of characters the tty driver
 * 	will accept for queuing to be written.  This number is subject
 * 	to change as output buffers get emptied, or if the output flow
 *	control is acted.
 * 
 * int  (*ioctl)(struct tty_struct *tty, struct file * file,
 * 	    unsigned int cmd, unsigned long arg);
 *
 * 	This routine allows the tty driver to implement
 *	device-specific ioctl's.  If the ioctl number passed in cmd
 * 	is not recognized by the driver, it should return ENOIOCTLCMD.
 *
 * long (*compat_ioctl)(struct tty_struct *tty, struct file * file,
 * 	                unsigned int cmd, unsigned long arg);
 *
 * 	implement ioctl processing for 32 bit process on 64 bit system
 * 
 * void (*set_termios)(struct tty_struct *tty, struct ktermios * old);
 *
 * 	This routine allows the tty driver to be notified when
 * 	device's termios settings have changed.  Note that a
 * 	well-designed tty driver should be prepared to accept the case
 * 	where old == NULL, and try to do something rational.
 *
 * void (*set_ldisc)(struct tty_struct *tty);
 *
 * 	This routine allows the tty driver to be notified when the
 * 	device's termios settings have changed.
 * 
 * void (*throttle)(struct tty_struct * tty);
 *
 * 	This routine notifies the tty driver that input buffers for
 * 	the line discipline are close to full, and it should somehow
 * 	signal that no more characters should be sent to the tty.
 * 
 * void (*unthrottle)(struct tty_struct * tty);
 *
 * 	This routine notifies the tty drivers that it should signals
 * 	that characters can now be sent to the tty without fear of
 * 	overrunning the input buffers of the line disciplines.
 * 
 * void (*stop)(struct tty_struct *tty);
 *
 * 	This routine notifies the tty driver that it should stop
 * 	outputting characters to the tty device.  
 * 
 * void (*start)(struct tty_struct *tty);
 *
 * 	This routine notifies the tty driver that it resume sending
 *	characters to the tty device.
 * 
 * void (*hangup)(struct tty_struct *tty);
 *
 * 	This routine notifies the tty driver that it should hangup the
 * 	tty device.
 *
 * void (*break_ctl)(struct tty_stuct *tty, int state);
 *
 * 	This optional routine requests the tty driver to turn on or
 * 	off BREAK status on the RS-232 port.  If state is -1,
 * 	then the BREAK status should be turned on; if state is 0, then
 * 	BREAK should be turned off.
 *
 * 	If this routine is implemented, the high-level tty driver will
 * 	handle the following ioctls: TCSBRK, TCSBRKP, TIOCSBRK,
 * 	TIOCCBRK.  Otherwise, these ioctls will be passed down to the
 * 	driver to handle.
 *
 * void (*wait_until_sent)(struct tty_struct *tty, int timeout);
 * 
 * 	This routine waits until the device has written out all of the
 * 	characters in its transmitter FIFO.
 *
 * void (*send_xchar)(struct tty_struct *tty, char ch);
 *
 * 	This routine is used to send a high-priority XON/XOFF
 * 	character to the device.
 */

#include <linux/fs.h>
#include <linux/list.h>
#include <linux/cdev.h>

struct tty_struct;

struct tty_operations {
	int  (*open)(struct tty_struct * tty, struct file * filp);
	void (*close)(struct tty_struct * tty, struct file * filp);
	int  (*write)(struct tty_struct * tty,
		      const unsigned char *buf, int count);
	void (*put_char)(struct tty_struct *tty, unsigned char ch);
	void (*flush_chars)(struct tty_struct *tty);
	int  (*write_room)(struct tty_struct *tty);
	int  (*chars_in_buffer)(struct tty_struct *tty);
	int  (*ioctl)(struct tty_struct *tty, struct file * file,
		    unsigned int cmd, unsigned long arg);
	long (*compat_ioctl)(struct tty_struct *tty, struct file * file,
			     unsigned int cmd, unsigned long arg);
	void (*set_termios)(struct tty_struct *tty, struct ktermios * old);
	void (*throttle)(struct tty_struct * tty);
	void (*unthrottle)(struct tty_struct * tty);
	void (*stop)(struct tty_struct *tty);
	void (*start)(struct tty_struct *tty);
	void (*hangup)(struct tty_struct *tty);
	void (*break_ctl)(struct tty_struct *tty, int state);
	void (*flush_buffer)(struct tty_struct *tty);
	void (*set_ldisc)(struct tty_struct *tty);
	void (*wait_until_sent)(struct tty_struct *tty, int timeout);
	void (*send_xchar)(struct tty_struct *tty, char ch);
	int (*read_proc)(char *page, char **start, off_t off,
			  int count, int *eof, void *data);
	int (*write_proc)(struct file *file, const char __user *buffer,
			  unsigned long count, void *data);
	int (*tiocmget)(struct tty_struct *tty, struct file *file);
	int (*tiocmset)(struct tty_struct *tty, struct file *file,
			unsigned int set, unsigned int clear);
};

struct tty_driver {
	int	magic;		/* magic number for this structure */
	struct cdev cdev;
	struct module	*owner;
	const char	*driver_name;
	const char	*name;
	int	name_base;	/* offset of printed name */
	int	major;		/* major device number */
	int	minor_start;	/* start of minor device number */
	int	minor_num;	/* number of *possible* devices */
	int	num;		/* number of devices allocated */
	short	type;		/* type of tty driver */
	short	subtype;	/* subtype of tty driver */
	struct ktermios init_termios; /* Initial termios */
	int	flags;		/* tty driver flags */
	int	refcount;	/* for loadable tty drivers */
	struct proc_dir_entry *proc_entry; /* /proc fs entry */
	struct tty_driver *other; /* only used for the PTY driver */

	/*
	 * Pointer to the tty data structures
	 */
	struct tty_struct **ttys;
	struct ktermios **termios;
	struct ktermios **termios_locked;
	void *driver_state;	/* only used for the PTY driver */
	
	/*
	 * Interface routines from the upper tty layer to the tty
	 * driver.	Will be replaced with struct tty_operations.
	 */
	int  (*open)(struct tty_struct * tty, struct file * filp);
	void (*close)(struct tty_struct * tty, struct file * filp);
	int  (*write)(struct tty_struct * tty,
		      const unsigned char *buf, int count);
	void (*put_char)(struct tty_struct *tty, unsigned char ch);
	void (*flush_chars)(struct tty_struct *tty);
	int  (*write_room)(struct tty_struct *tty);
	int  (*chars_in_buffer)(struct tty_struct *tty);
	int  (*ioctl)(struct tty_struct *tty, struct file * file,
		    unsigned int cmd, unsigned long arg);
	long (*compat_ioctl)(struct tty_struct *tty, struct file * file,
			     unsigned int cmd, unsigned long arg);
	void (*set_termios)(struct tty_struct *tty, struct ktermios * old);
	void (*throttle)(struct tty_struct * tty);
	void (*unthrottle)(struct tty_struct * tty);
	void (*stop)(struct tty_struct *tty);
	void (*start)(struct tty_struct *tty);
	void (*hangup)(struct tty_struct *tty);
	void (*break_ctl)(struct tty_struct *tty, int state);
	void (*flush_buffer)(struct tty_struct *tty);
	void (*set_ldisc)(struct tty_struct *tty);
	void (*wait_until_sent)(struct tty_struct *tty, int timeout);
	void (*send_xchar)(struct tty_struct *tty, char ch);
	int (*read_proc)(char *page, char **start, off_t off,
			  int count, int *eof, void *data);
	int (*write_proc)(struct file *file, const char __user *buffer,
			  unsigned long count, void *data);
	int (*tiocmget)(struct tty_struct *tty, struct file *file);
	int (*tiocmset)(struct tty_struct *tty, struct file *file,
			unsigned int set, unsigned int clear);

	struct list_head tty_drivers;
};

extern struct list_head tty_drivers;

struct tty_driver *alloc_tty_driver(int lines);
void put_tty_driver(struct tty_driver *driver);
void tty_set_operations(struct tty_driver *driver,
			const struct tty_operations *op);

/* tty driver magic number */
#define TTY_DRIVER_MAGIC		0x5402

/*
 * tty driver flags
 * 
 * TTY_DRIVER_RESET_TERMIOS --- requests the tty layer to reset the
 * 	termios setting when the last process has closed the device.
 * 	Used for PTY's, in particular.
 * 
 * TTY_DRIVER_REAL_RAW --- if set, indicates that the driver will
 * 	guarantee never not to set any special character handling
 * 	flags if ((IGNBRK || (!BRKINT && !PARMRK)) && (IGNPAR ||
 * 	!INPCK)).  That is, if there is no reason for the driver to
 * 	send notifications of parity and break characters up to the
 * 	line driver, it won't do so.  This allows the line driver to
 *	optimize for this case if this flag is set.  (Note that there
 * 	is also a promise, if the above case is true, not to signal
 * 	overruns, either.)
 *
 * TTY_DRIVER_DYNAMIC_DEV --- if set, the individual tty devices need
 *	to be registered with a call to tty_register_driver() when the
 *	device is found in the system and unregistered with a call to
 *	tty_unregister_device() so the devices will be show up
 *	properly in sysfs.  If not set, driver->num entries will be
 *	created by the tty core in sysfs when tty_register_driver() is
 *	called.  This is to be used by drivers that have tty devices
 *	that can appear and disappear while the main tty driver is
 *	registered with the tty core.
 *
 * TTY_DRIVER_DEVPTS_MEM -- don't use the standard arrays, instead
 *	use dynamic memory keyed through the devpts filesystem.  This
 *	is only applicable to the pty driver.
 */
#define TTY_DRIVER_INSTALLED		0x0001
#define TTY_DRIVER_RESET_TERMIOS	0x0002
#define TTY_DRIVER_REAL_RAW		0x0004
#define TTY_DRIVER_DYNAMIC_DEV		0x0008
#define TTY_DRIVER_DEVPTS_MEM		0x0010

/* tty driver types */
#define TTY_DRIVER_TYPE_SYSTEM		0x0001
#define TTY_DRIVER_TYPE_CONSOLE		0x0002
#define TTY_DRIVER_TYPE_SERIAL		0x0003
#define TTY_DRIVER_TYPE_PTY		0x0004
#define TTY_DRIVER_TYPE_SCC		0x0005	/* scc driver */
#define TTY_DRIVER_TYPE_SYSCONS		0x0006

/* system subtypes (magic, used by tty_io.c) */
#define SYSTEM_TYPE_TTY			0x0001
#define SYSTEM_TYPE_CONSOLE		0x0002
#define SYSTEM_TYPE_SYSCONS		0x0003
#define SYSTEM_TYPE_SYSPTMX		0x0004

/* pty subtypes (magic, used by tty_io.c) */
#define PTY_TYPE_MASTER			0x0001
#define PTY_TYPE_SLAVE			0x0002

/* serial subtype definitions */
#define SERIAL_TYPE_NORMAL	1

#endif /* #ifdef _LINUX_TTY_DRIVER_H */
Commit	Line	Data
1da177e4 LT	1	#ifndef _LINUX_TTY_DRIVER_H
	2	#define _LINUX_TTY_DRIVER_H
	3
	4	/*
	5	* This structure defines the interface between the low-level tty
	6	* driver and the tty routines. The following routines can be
	7	* defined; unless noted otherwise, they are optional, and can be
	8	* filled in with a null pointer.
	9	*
	10	* int (open)(struct tty_struct tty, struct file * filp);
	11	*
	12	* This routine is called when a particular tty device is opened.
	13	* This routine is mandatory; if this routine is not filled in,
	14	* the attempted open will fail with ENODEV.
	15	*
	16	* void (close)(struct tty_struct tty, struct file * filp);
	17	*
	18	* This routine is called when a particular tty device is closed.
	19	*
	20	* int (write)(struct tty_struct tty,
	21	* const unsigned char *buf, int count);
	22	*
	23	* This routine is called by the kernel to write a series of
	24	* characters to the tty device. The characters may come from
	25	* user space or kernel space. This routine will return the
	26	* number of characters actually accepted for writing. This
	27	* routine is mandatory.
	28	*
	29	* void (put_char)(struct tty_struct tty, unsigned char ch);
	30	*
	31	* This routine is called by the kernel to write a single
	32	* character to the tty device. If the kernel uses this routine,
	33	* it must call the flush_chars() routine (if defined) when it is
	34	* done stuffing characters into the driver. If there is no room
	35	* in the queue, the character is ignored.
	36	*
	37	* void (flush_chars)(struct tty_struct tty);
	38	*
	39	* This routine is called by the kernel after it has written a
	40	* series of characters to the tty device using put_char().
	41	*
	42	* int (write_room)(struct tty_struct tty);
	43	*
	44	* This routine returns the numbers of characters the tty driver
	45	* will accept for queuing to be written. This number is subject
	46	* to change as output buffers get emptied, or if the output flow
	47	* control is acted.
	48	*
	49	* int (ioctl)(struct tty_struct tty, struct file * file,
	50	* unsigned int cmd, unsigned long arg);
	51	*
	52	* This routine allows the tty driver to implement
	53	* device-specific ioctl's. If the ioctl number passed in cmd
	54	* is not recognized by the driver, it should return ENOIOCTLCMD.
e10cc1df PF	55	*
	56	* long (compat_ioctl)(struct tty_struct tty, struct file * file,
	57	* unsigned int cmd, unsigned long arg);
	58	*
	59	* implement ioctl processing for 32 bit process on 64 bit system
1da177e4	60	*
edc6afc5	61	* void (set_termios)(struct tty_struct tty, struct ktermios * old);
1da177e4 LT	62	*
	63	* This routine allows the tty driver to be notified when
	64	* device's termios settings have changed. Note that a
	65	* well-designed tty driver should be prepared to accept the case
	66	* where old == NULL, and try to do something rational.
	67	*
	68	* void (set_ldisc)(struct tty_struct tty);
	69	*
	70	* This routine allows the tty driver to be notified when the
	71	* device's termios settings have changed.
	72	*
	73	* void (throttle)(struct tty_struct tty);
	74	*
	75	* This routine notifies the tty driver that input buffers for
	76	* the line discipline are close to full, and it should somehow
	77	* signal that no more characters should be sent to the tty.
	78	*
	79	* void (unthrottle)(struct tty_struct tty);
	80	*
	81	* This routine notifies the tty drivers that it should signals
	82	* that characters can now be sent to the tty without fear of
	83	* overrunning the input buffers of the line disciplines.
	84	*
	85	* void (stop)(struct tty_struct tty);
	86	*
	87	* This routine notifies the tty driver that it should stop
	88	* outputting characters to the tty device.
	89	*
	90	* void (start)(struct tty_struct tty);
	91	*
	92	* This routine notifies the tty driver that it resume sending
	93	* characters to the tty device.
	94	*
	95	* void (hangup)(struct tty_struct tty);
	96	*
	97	* This routine notifies the tty driver that it should hangup the
	98	* tty device.
	99	*
	100	* void (break_ctl)(struct tty_stuct tty, int state);
	101	*
	102	* This optional routine requests the tty driver to turn on or
	103	* off BREAK status on the RS-232 port. If state is -1,
	104	* then the BREAK status should be turned on; if state is 0, then
	105	* BREAK should be turned off.
	106	*
	107	* If this routine is implemented, the high-level tty driver will
	108	* handle the following ioctls: TCSBRK, TCSBRKP, TIOCSBRK,
	109	* TIOCCBRK. Otherwise, these ioctls will be passed down to the
	110	* driver to handle.
	111	*
	112	* void (wait_until_sent)(struct tty_struct tty, int timeout);
	113	*
	114	* This routine waits until the device has written out all of the
	115	* characters in its transmitter FIFO.
	116	*
	117	* void (send_xchar)(struct tty_struct tty, char ch);
	118	*
	119	* This routine is used to send a high-priority XON/XOFF
	120	* character to the device.
	121	*/
	122
	123	#include <linux/fs.h>
	124	#include <linux/list.h>
	125	#include <linux/cdev.h>
126
127	struct tty_struct;
128
129	struct tty_operations {
130	int (open)(struct tty_struct tty, struct file * filp);
131	void (close)(struct tty_struct tty, struct file * filp);
132	int (write)(struct tty_struct tty,
133	const unsigned char *buf, int count);
134	void (put_char)(struct tty_struct tty, unsigned char ch);
135	void (flush_chars)(struct tty_struct tty);
136	int (write_room)(struct tty_struct tty);
137	int (chars_in_buffer)(struct tty_struct tty);
138	int (ioctl)(struct tty_struct tty, struct file * file,
139	unsigned int cmd, unsigned long arg);
e10cc1df PF	140	long (compat_ioctl)(struct tty_struct tty, struct file * file,
e10cc1df PF	141	unsigned int cmd, unsigned long arg);
edc6afc5	142	void (set_termios)(struct tty_struct tty, struct ktermios * old);
1da177e4 LT	143	void (throttle)(struct tty_struct tty);
	144	void (unthrottle)(struct tty_struct tty);
	145	void (stop)(struct tty_struct tty);
	146	void (start)(struct tty_struct tty);
	147	void (hangup)(struct tty_struct tty);
	148	void (break_ctl)(struct tty_struct tty, int state);
	149	void (flush_buffer)(struct tty_struct tty);
	150	void (set_ldisc)(struct tty_struct tty);
	151	void (wait_until_sent)(struct tty_struct tty, int timeout);
	152	void (send_xchar)(struct tty_struct tty, char ch);
	153	int (read_proc)(char page, char **start, off_t off,
	154	int count, int eof, void data);
	155	int (write_proc)(struct file file, const char __user *buffer,
	156	unsigned long count, void *data);
	157	int (tiocmget)(struct tty_struct tty, struct file *file);
	158	int (tiocmset)(struct tty_struct tty, struct file *file,
	159	unsigned int set, unsigned int clear);
	160	};
	161
	162	struct tty_driver {
	163	int magic; /* magic number for this structure */
	164	struct cdev cdev;
	165	struct module *owner;
	166	const char *driver_name;
1da177e4 LT	167	const char *name;
	168	int name_base; /* offset of printed name */
	169	int major; /* major device number */
	170	int minor_start; /* start of minor device number */
	171	int minor_num; /* number of possible devices */
	172	int num; /* number of devices allocated */
	173	short type; /* type of tty driver */
	174	short subtype; /* subtype of tty driver */
edc6afc5	175	struct ktermios init_termios; /* Initial termios */
1da177e4 LT	176	int flags; /* tty driver flags */
	177	int refcount; /* for loadable tty drivers */
	178	struct proc_dir_entry proc_entry; / /proc fs entry */
	179	struct tty_driver other; / only used for the PTY driver */
	180
	181	/*
	182	* Pointer to the tty data structures
	183	*/
	184	struct tty_struct **ttys;
edc6afc5 AC	185	struct ktermios **termios;
edc6afc5 AC	186	struct ktermios **termios_locked;
1da177e4 LT	187	void driver_state; / only used for the PTY driver */
	188
	189	/*
	190	* Interface routines from the upper tty layer to the tty
	191	* driver. Will be replaced with struct tty_operations.
	192	*/
	193	int (open)(struct tty_struct tty, struct file * filp);
	194	void (close)(struct tty_struct tty, struct file * filp);
	195	int (write)(struct tty_struct tty,
	196	const unsigned char *buf, int count);
	197	void (put_char)(struct tty_struct tty, unsigned char ch);
	198	void (flush_chars)(struct tty_struct tty);
	199	int (write_room)(struct tty_struct tty);
	200	int (chars_in_buffer)(struct tty_struct tty);
	201	int (ioctl)(struct tty_struct tty, struct file * file,
	202	unsigned int cmd, unsigned long arg);
e10cc1df PF	203	long (compat_ioctl)(struct tty_struct tty, struct file * file,
e10cc1df PF	204	unsigned int cmd, unsigned long arg);
edc6afc5	205	void (set_termios)(struct tty_struct tty, struct ktermios * old);
1da177e4 LT	206	void (throttle)(struct tty_struct tty);
	207	void (unthrottle)(struct tty_struct tty);
	208	void (stop)(struct tty_struct tty);
	209	void (start)(struct tty_struct tty);
	210	void (hangup)(struct tty_struct tty);
	211	void (break_ctl)(struct tty_struct tty, int state);
	212	void (flush_buffer)(struct tty_struct tty);
	213	void (set_ldisc)(struct tty_struct tty);
	214	void (wait_until_sent)(struct tty_struct tty, int timeout);
	215	void (send_xchar)(struct tty_struct tty, char ch);
	216	int (read_proc)(char page, char **start, off_t off,
	217	int count, int eof, void data);
	218	int (write_proc)(struct file file, const char __user *buffer,
	219	unsigned long count, void *data);
	220	int (tiocmget)(struct tty_struct tty, struct file *file);
	221	int (tiocmset)(struct tty_struct tty, struct file *file,
	222	unsigned int set, unsigned int clear);
	223
	224	struct list_head tty_drivers;
	225	};
	226
	227	extern struct list_head tty_drivers;
	228
	229	struct tty_driver *alloc_tty_driver(int lines);
	230	void put_tty_driver(struct tty_driver *driver);
b68e31d0 JD	231	void tty_set_operations(struct tty_driver *driver,
b68e31d0 JD	232	const struct tty_operations *op);
1da177e4 LT	233
	234	/* tty driver magic number */
	235	#define TTY_DRIVER_MAGIC 0x5402
	236
	237	/*
	238	* tty driver flags
	239	*
	240	* TTY_DRIVER_RESET_TERMIOS --- requests the tty layer to reset the
	241	* termios setting when the last process has closed the device.
	242	* Used for PTY's, in particular.
	243	*
	244	* TTY_DRIVER_REAL_RAW --- if set, indicates that the driver will
	245	* guarantee never not to set any special character handling
	246	* flags if ((IGNBRK \|\| (!BRKINT && !PARMRK)) && (IGNPAR \|\|
	247	* !INPCK)). That is, if there is no reason for the driver to
	248	* send notifications of parity and break characters up to the
	249	* line driver, it won't do so. This allows the line driver to
	250	* optimize for this case if this flag is set. (Note that there
	251	* is also a promise, if the above case is true, not to signal
	252	* overruns, either.)
	253	*
331b8319 GKH	254	* TTY_DRIVER_DYNAMIC_DEV --- if set, the individual tty devices need
	255	* to be registered with a call to tty_register_driver() when the
	256	* device is found in the system and unregistered with a call to
	257	* tty_unregister_device() so the devices will be show up
	258	* properly in sysfs. If not set, driver->num entries will be
	259	* created by the tty core in sysfs when tty_register_driver() is
	260	* called. This is to be used by drivers that have tty devices
	261	* that can appear and disappear while the main tty driver is
	262	* registered with the tty core.
1da177e4 LT	263	*
	264	* TTY_DRIVER_DEVPTS_MEM -- don't use the standard arrays, instead
	265	* use dynamic memory keyed through the devpts filesystem. This
	266	* is only applicable to the pty driver.
	267	*/
	268	#define TTY_DRIVER_INSTALLED 0x0001
	269	#define TTY_DRIVER_RESET_TERMIOS 0x0002
	270	#define TTY_DRIVER_REAL_RAW 0x0004
331b8319	271	#define TTY_DRIVER_DYNAMIC_DEV 0x0008
1da177e4 LT	272	#define TTY_DRIVER_DEVPTS_MEM 0x0010
	273
	274	/* tty driver types */
	275	#define TTY_DRIVER_TYPE_SYSTEM 0x0001
	276	#define TTY_DRIVER_TYPE_CONSOLE 0x0002
	277	#define TTY_DRIVER_TYPE_SERIAL 0x0003
	278	#define TTY_DRIVER_TYPE_PTY 0x0004
	279	#define TTY_DRIVER_TYPE_SCC 0x0005 /* scc driver */
	280	#define TTY_DRIVER_TYPE_SYSCONS 0x0006
	281
	282	/* system subtypes (magic, used by tty_io.c) */
	283	#define SYSTEM_TYPE_TTY 0x0001
	284	#define SYSTEM_TYPE_CONSOLE 0x0002
	285	#define SYSTEM_TYPE_SYSCONS 0x0003
	286	#define SYSTEM_TYPE_SYSPTMX 0x0004
	287
	288	/* pty subtypes (magic, used by tty_io.c) */
	289	#define PTY_TYPE_MASTER 0x0001
	290	#define PTY_TYPE_SLAVE 0x0002
	291
	292	/* serial subtype definitions */
	293	#define SERIAL_TYPE_NORMAL 1
	294
	295	#endif /* #ifdef _LINUX_TTY_DRIVER_H */