projects / linux-2.6-block.git / blame
? search:
summary | shortlog | log | commit | commitdiff | tree
blob | blame (incremental) | history | HEAD
xhci: replace USB_MAXINTERFACES with config->desc.bNumInterface
[linux-2.6-block.git] / drivers / usb / host / xhci.h
CommitLineData
74c68741
SS		 1/*
2 * xHCI host controller driver
3 *
4 * Copyright (C) 2008 Intel Corp.
5 *
6 * Author: Sarah Sharp
7 * Some code borrowed from the Linux EHCI driver.
8 *
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of the GNU General Public License version 2 as
11 * published by the Free Software Foundation.
12 *
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
15 * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
16 * for more details.
17 *
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software Foundation,
20 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
21 */
22
23#ifndef __LINUX_XHCI_HCD_H
24#define __LINUX_XHCI_HCD_H
25
26#include <linux/usb.h>
7f84eef0 27#include <linux/timer.h>
8e595a5d 28#include <linux/kernel.h>
27729aad 29#include <linux/usb/hcd.h>
74c68741 30
74c68741
SS		 31/* Code sharing between pci-quirks and xhci hcd */
32#include "xhci-ext-caps.h"
c41136b0 33#include "pci-quirks.h"
74c68741
SS		 34
35/* xHCI PCI Configuration Registers */
36#define XHCI_SBRN_OFFSET (0x60)
37
66d4eadd
SS		 38/* Max number of USB devices for any host controller - limit in section 6.1 */
39#define MAX_HC_SLOTS 256
0f2a7930
SS		 40/* Section 5.3.3 - MaxPorts */
41#define MAX_HC_PORTS 127
66d4eadd 42
74c68741
SS		 43/*
44 * xHCI register interface.
45 * This corresponds to the eXtensible Host Controller Interface (xHCI)
46 * Revision 0.95 specification
74c68741
SS		 47 */
48
49/**
50 * struct xhci_cap_regs - xHCI Host Controller Capability Registers.
51 * @hc_capbase: length of the capabilities register and HC version number
52 * @hcs_params1: HCSPARAMS1 - Structural Parameters 1
53 * @hcs_params2: HCSPARAMS2 - Structural Parameters 2
54 * @hcs_params3: HCSPARAMS3 - Structural Parameters 3
55 * @hcc_params: HCCPARAMS - Capability Parameters
56 * @db_off: DBOFF - Doorbell array offset
57 * @run_regs_off: RTSOFF - Runtime register space offset
58 */
59struct xhci_cap_regs {
28ccd296
ME		 60 __le32 hc_capbase;
61 __le32 hcs_params1;
62 __le32 hcs_params2;
63 __le32 hcs_params3;
64 __le32 hcc_params;
65 __le32 db_off;
66 __le32 run_regs_off;
74c68741 67 /* Reserved up to (CAPLENGTH - 0x1C) */
98441973 68};
74c68741
SS		 69
70/* hc_capbase bitmasks */
71/* bits 7:0 - how long is the Capabilities register */
72#define HC_LENGTH(p) XHCI_HC_LENGTH(p)
73/* bits 31:16 */
74#define HC_VERSION(p) (((p) >> 16) & 0xffff)
75
76/* HCSPARAMS1 - hcs_params1 - bitmasks */
77/* bits 0:7, Max Device Slots */
78#define HCS_MAX_SLOTS(p) (((p) >> 0) & 0xff)
79#define HCS_SLOTS_MASK 0xff
80/* bits 8:18, Max Interrupters */
81#define HCS_MAX_INTRS(p) (((p) >> 8) & 0x7ff)
82/* bits 24:31, Max Ports - max value is 0x7F = 127 ports */
83#define HCS_MAX_PORTS(p) (((p) >> 24) & 0x7f)
84
85/* HCSPARAMS2 - hcs_params2 - bitmasks */
86/* bits 0:3, frames or uframes that SW needs to queue transactions
87 * ahead of the HW to meet periodic deadlines */
88#define HCS_IST(p) (((p) >> 0) & 0xf)
89/* bits 4:7, max number of Event Ring segments */
90#define HCS_ERST_MAX(p) (((p) >> 4) & 0xf)
91/* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
92/* bits 27:31 number of Scratchpad buffers SW must allocate for the HW */
254c80a3 93#define HCS_MAX_SCRATCHPAD(p) (((p) >> 27) & 0x1f)
74c68741
SS		 94
95/* HCSPARAMS3 - hcs_params3 - bitmasks */
96/* bits 0:7, Max U1 to U0 latency for the roothub ports */
97#define HCS_U1_LATENCY(p) (((p) >> 0) & 0xff)
98/* bits 16:31, Max U2 to U0 latency for the roothub ports */
99#define HCS_U2_LATENCY(p) (((p) >> 16) & 0xffff)
100
101/* HCCPARAMS - hcc_params - bitmasks */
102/* true: HC can use 64-bit address pointers */
103#define HCC_64BIT_ADDR(p) ((p) & (1 << 0))
104/* true: HC can do bandwidth negotiation */
105#define HCC_BANDWIDTH_NEG(p) ((p) & (1 << 1))
106/* true: HC uses 64-byte Device Context structures
107 * FIXME 64-byte context structures aren't supported yet.
108 */
109#define HCC_64BYTE_CONTEXT(p) ((p) & (1 << 2))
110/* true: HC has port power switches */
111#define HCC_PPC(p) ((p) & (1 << 3))
112/* true: HC has port indicators */
113#define HCS_INDICATOR(p) ((p) & (1 << 4))
114/* true: HC has Light HC Reset Capability */
115#define HCC_LIGHT_RESET(p) ((p) & (1 << 5))
116/* true: HC supports latency tolerance messaging */
117#define HCC_LTC(p) ((p) & (1 << 6))
118/* true: no secondary Stream ID Support */
119#define HCC_NSS(p) ((p) & (1 << 7))
120/* Max size for Primary Stream Arrays - 2^(n+1), where n is bits 12:15 */
8df75f42 121#define HCC_MAX_PSA(p) (1 << ((((p) >> 12) & 0xf) + 1))
74c68741
SS		 122/* Extended Capabilities pointer from PCI base - section 5.3.6 */
123#define HCC_EXT_CAPS(p) XHCI_HCC_EXT_CAPS(p)
124
125/* db_off bitmask - bits 0:1 reserved */
126#define DBOFF_MASK (~0x3)
127
128/* run_regs_off bitmask - bits 0:4 reserved */
129#define RTSOFF_MASK (~0x1f)
130
131
132/* Number of registers per port */
133#define NUM_PORT_REGS 4
134
b6e76371
MN		 135#define PORTSC 0
136#define PORTPMSC 1
137#define PORTLI 2
138#define PORTHLPMC 3
139
74c68741
SS		 140/**
141 * struct xhci_op_regs - xHCI Host Controller Operational Registers.
142 * @command: USBCMD - xHC command register
143 * @status: USBSTS - xHC status register
144 * @page_size: This indicates the page size that the host controller
145 * supports. If bit n is set, the HC supports a page size
146 * of 2^(n+12), up to a 128MB page size.
147 * 4K is the minimum page size.
148 * @cmd_ring: CRP - 64-bit Command Ring Pointer
149 * @dcbaa_ptr: DCBAAP - 64-bit Device Context Base Address Array Pointer
150 * @config_reg: CONFIG - Configure Register
151 * @port_status_base: PORTSCn - base address for Port Status and Control
152 * Each port has a Port Status and Control register,
153 * followed by a Port Power Management Status and Control
154 * register, a Port Link Info register, and a reserved
155 * register.
156 * @port_power_base: PORTPMSCn - base address for
157 * Port Power Management Status and Control
158 * @port_link_base: PORTLIn - base address for Port Link Info (current
159 * Link PM state and control) for USB 2.1 and USB 3.0
160 * devices.
161 */
162struct xhci_op_regs {
28ccd296
ME		 163 __le32 command;
164 __le32 status;
165 __le32 page_size;
166 __le32 reserved1;
167 __le32 reserved2;
168 __le32 dev_notification;
169 __le64 cmd_ring;
74c68741 170 /* rsvd: offset 0x20-2F */
28ccd296
ME		 171 __le32 reserved3[4];
172 __le64 dcbaa_ptr;
173 __le32 config_reg;
74c68741 174 /* rsvd: offset 0x3C-3FF */
28ccd296 175 __le32 reserved4[241];
74c68741 176 /* port 1 registers, which serve as a base address for other ports */
28ccd296
ME		 177 __le32 port_status_base;
178 __le32 port_power_base;
179 __le32 port_link_base;
180 __le32 reserved5;
74c68741 181 /* registers for ports 2-255 */
28ccd296 182 __le32 reserved6[NUM_PORT_REGS*254];
98441973 183};
74c68741
SS		 184
185/* USBCMD - USB command - command bitmasks */
186/* start/stop HC execution - do not write unless HC is halted*/
187#define CMD_RUN XHCI_CMD_RUN
188/* Reset HC - resets internal HC state machine and all registers (except
189 * PCI config regs). HC does NOT drive a USB reset on the downstream ports.
190 * The xHCI driver must reinitialize the xHC after setting this bit.
191 */
192#define CMD_RESET (1 << 1)
193/* Event Interrupt Enable - a '1' allows interrupts from the host controller */
194#define CMD_EIE XHCI_CMD_EIE
195/* Host System Error Interrupt Enable - get out-of-band signal for HC errors */
196#define CMD_HSEIE XHCI_CMD_HSEIE
197/* bits 4:6 are reserved (and should be preserved on writes). */
198/* light reset (port status stays unchanged) - reset completed when this is 0 */
199#define CMD_LRESET (1 << 7)
5535b1d5 200/* host controller save/restore state. */
74c68741
SS		 201#define CMD_CSS (1 << 8)
202#define CMD_CRS (1 << 9)
203/* Enable Wrap Event - '1' means xHC generates an event when MFINDEX wraps. */
204#define CMD_EWE XHCI_CMD_EWE
205/* MFINDEX power management - '1' means xHC can stop MFINDEX counter if all root
206 * hubs are in U3 (selective suspend), disconnect, disabled, or powered-off.
207 * '0' means the xHC can power it off if all ports are in the disconnect,
208 * disabled, or powered-off state.
209 */
210#define CMD_PM_INDEX (1 << 11)
211/* bits 12:31 are reserved (and should be preserved on writes). */
212
4e833c0b 213/* IMAN - Interrupt Management Register */
f8264340
DT		 214#define IMAN_IE (1 << 1)
215#define IMAN_IP (1 << 0)
4e833c0b 216
74c68741
SS		 217/* USBSTS - USB status - status bitmasks */
218/* HC not running - set to 1 when run/stop bit is cleared. */
219#define STS_HALT XHCI_STS_HALT
220/* serious error, e.g. PCI parity error. The HC will clear the run/stop bit. */
221#define STS_FATAL (1 << 2)
222/* event interrupt - clear this prior to clearing any IP flags in IR set*/
223#define STS_EINT (1 << 3)
224/* port change detect */
225#define STS_PORT (1 << 4)
226/* bits 5:7 reserved and zeroed */
227/* save state status - '1' means xHC is saving state */
228#define STS_SAVE (1 << 8)
229/* restore state status - '1' means xHC is restoring state */
230#define STS_RESTORE (1 << 9)
231/* true: save or restore error */
232#define STS_SRE (1 << 10)
233/* true: Controller Not Ready to accept doorbell or op reg writes after reset */
234#define STS_CNR XHCI_STS_CNR
235/* true: internal Host Controller Error - SW needs to reset and reinitialize */
236#define STS_HCE (1 << 12)
237/* bits 13:31 reserved and should be preserved */
238
239/*
240 * DNCTRL - Device Notification Control Register - dev_notification bitmasks
241 * Generate a device notification event when the HC sees a transaction with a
242 * notification type that matches a bit set in this bit field.
243 */
244#define DEV_NOTE_MASK (0xffff)
5a6c2f3f 245#define ENABLE_DEV_NOTE(x) (1 << (x))
74c68741
SS		 246/* Most of the device notification types should only be used for debug.
247 * SW does need to pay attention to function wake notifications.
248 */
249#define DEV_NOTE_FWAKE ENABLE_DEV_NOTE(1)
250
0ebbab37
SS		 251/* CRCR - Command Ring Control Register - cmd_ring bitmasks */
252/* bit 0 is the command ring cycle state */
253/* stop ring operation after completion of the currently executing command */
254#define CMD_RING_PAUSE (1 << 1)
255/* stop ring immediately - abort the currently executing command */
256#define CMD_RING_ABORT (1 << 2)
257/* true: command ring is running */
258#define CMD_RING_RUNNING (1 << 3)
259/* bits 4:5 reserved and should be preserved */
260/* Command Ring pointer - bit mask for the lower 32 bits. */
8e595a5d 261#define CMD_RING_RSVD_BITS (0x3f)
0ebbab37 262
74c68741
SS		 263/* CONFIG - Configure Register - config_reg bitmasks */
264/* bits 0:7 - maximum number of device slots enabled (NumSlotsEn) */
265#define MAX_DEVS(p) ((p) & 0xff)
266/* bits 8:31 - reserved and should be preserved */
267
268/* PORTSC - Port Status and Control Register - port_status_base bitmasks */
269/* true: device connected */
270#define PORT_CONNECT (1 << 0)
271/* true: port enabled */
272#define PORT_PE (1 << 1)
273/* bit 2 reserved and zeroed */
274/* true: port has an over-current condition */
275#define PORT_OC (1 << 3)
276/* true: port reset signaling asserted */
277#define PORT_RESET (1 << 4)
278/* Port Link State - bits 5:8
279 * A read gives the current link PM state of the port,
280 * a write with Link State Write Strobe set sets the link state.
281 */
be88fe4f
AX		 282#define PORT_PLS_MASK (0xf << 5)
283#define XDEV_U0 (0x0 << 5)
9574323c 284#define XDEV_U2 (0x2 << 5)
be88fe4f
AX		 285#define XDEV_U3 (0x3 << 5)
286#define XDEV_RESUME (0xf << 5)
74c68741
SS		 287/* true: port has power (see HCC_PPC) */
288#define PORT_POWER (1 << 9)
289/* bits 10:13 indicate device speed:
290 * 0 - undefined speed - port hasn't be initialized by a reset yet
291 * 1 - full speed
292 * 2 - low speed
293 * 3 - high speed
294 * 4 - super speed
295 * 5-15 reserved
296 */
3ffbba95
SS		 297#define DEV_SPEED_MASK (0xf << 10)
298#define XDEV_FS (0x1 << 10)
299#define XDEV_LS (0x2 << 10)
300#define XDEV_HS (0x3 << 10)
301#define XDEV_SS (0x4 << 10)
74c68741 302#define DEV_UNDEFSPEED(p) (((p) & DEV_SPEED_MASK) == (0x0<<10))
3ffbba95
SS		 303#define DEV_FULLSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_FS)
304#define DEV_LOWSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_LS)
305#define DEV_HIGHSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_HS)
306#define DEV_SUPERSPEED(p) (((p) & DEV_SPEED_MASK) == XDEV_SS)
307/* Bits 20:23 in the Slot Context are the speed for the device */
308#define SLOT_SPEED_FS (XDEV_FS << 10)
309#define SLOT_SPEED_LS (XDEV_LS << 10)
310#define SLOT_SPEED_HS (XDEV_HS << 10)
311#define SLOT_SPEED_SS (XDEV_SS << 10)
74c68741
SS		 312/* Port Indicator Control */
313#define PORT_LED_OFF (0 << 14)
314#define PORT_LED_AMBER (1 << 14)
315#define PORT_LED_GREEN (2 << 14)
316#define PORT_LED_MASK (3 << 14)
317/* Port Link State Write Strobe - set this when changing link state */
318#define PORT_LINK_STROBE (1 << 16)
319/* true: connect status change */
320#define PORT_CSC (1 << 17)
321/* true: port enable change */
322#define PORT_PEC (1 << 18)
323/* true: warm reset for a USB 3.0 device is done. A "hot" reset puts the port
324 * into an enabled state, and the device into the default state. A "warm" reset
325 * also resets the link, forcing the device through the link training sequence.
326 * SW can also look at the Port Reset register to see when warm reset is done.
327 */
328#define PORT_WRC (1 << 19)
329/* true: over-current change */
330#define PORT_OCC (1 << 20)
331/* true: reset change - 1 to 0 transition of PORT_RESET */
332#define PORT_RC (1 << 21)
333/* port link status change - set on some port link state transitions:
334 * Transition Reason
335 * ------------------------------------------------------------------------------
336 * - U3 to Resume Wakeup signaling from a device
337 * - Resume to Recovery to U0 USB 3.0 device resume
338 * - Resume to U0 USB 2.0 device resume
339 * - U3 to Recovery to U0 Software resume of USB 3.0 device complete
340 * - U3 to U0 Software resume of USB 2.0 device complete
341 * - U2 to U0 L1 resume of USB 2.1 device complete
342 * - U0 to U0 (???) L1 entry rejection by USB 2.1 device
343 * - U0 to disabled L1 entry error with USB 2.1 device
344 * - Any state to inactive Error on USB 3.0 port
345 */
346#define PORT_PLC (1 << 22)
347/* port configure error change - port failed to configure its link partner */
348#define PORT_CEC (1 << 23)
8bea2bd3
SL		 349/* Cold Attach Status - xHC can set this bit to report device attached during
350 * Sx state. Warm port reset should be perfomed to clear this bit and move port
351 * to connected state.
352 */
353#define PORT_CAS (1 << 24)
74c68741
SS		 354/* wake on connect (enable) */
355#define PORT_WKCONN_E (1 << 25)
356/* wake on disconnect (enable) */
357#define PORT_WKDISC_E (1 << 26)
358/* wake on over-current (enable) */
359#define PORT_WKOC_E (1 << 27)
360/* bits 28:29 reserved */
361/* true: device is removable - for USB 3.0 roothub emulation */
362#define PORT_DEV_REMOVE (1 << 30)
363/* Initiate a warm port reset - complete when PORT_WRC is '1' */
364#define PORT_WR (1 << 31)
365
22e04870
DC		 366/* We mark duplicate entries with -1 */
367#define DUPLICATE_ENTRY ((u8)(-1))
368
74c68741
SS		 369/* Port Power Management Status and Control - port_power_base bitmasks */
370/* Inactivity timer value for transitions into U1, in microseconds.
371 * Timeout can be up to 127us. 0xFF means an infinite timeout.
372 */
373#define PORT_U1_TIMEOUT(p) ((p) & 0xff)
797b0ca5 374#define PORT_U1_TIMEOUT_MASK 0xff
74c68741
SS		 375/* Inactivity timer value for transitions into U2 */
376#define PORT_U2_TIMEOUT(p) (((p) & 0xff) << 8)
797b0ca5 377#define PORT_U2_TIMEOUT_MASK (0xff << 8)
74c68741
SS		 378/* Bits 24:31 for port testing */
379
9777e3ce 380/* USB2 Protocol PORTSPMSC */
9574323c
AX		 381#define PORT_L1S_MASK 7
382#define PORT_L1S_SUCCESS 1
383#define PORT_RWE (1 << 3)
384#define PORT_HIRD(p) (((p) & 0xf) << 4)
65580b43 385#define PORT_HIRD_MASK (0xf << 4)
58e21f73 386#define PORT_L1DS_MASK (0xff << 8)
9574323c 387#define PORT_L1DS(p) (((p) & 0xff) << 8)
65580b43 388#define PORT_HLE (1 << 16)
74c68741 389
a558ccdc
MN		 390
391/* USB2 Protocol PORTHLPMC */
392#define PORT_HIRDM(p)((p) & 3)
393#define PORT_L1_TIMEOUT(p)(((p) & 0xff) << 2)
394#define PORT_BESLD(p)(((p) & 0xf) << 10)
395
396/* use 512 microseconds as USB2 LPM L1 default timeout. */
397#define XHCI_L1_TIMEOUT 512
398
399/* Set default HIRD/BESL value to 4 (350/400us) for USB2 L1 LPM resume latency.
400 * Safe to use with mixed HIRD and BESL systems (host and device) and is used
401 * by other operating systems.
402 *
403 * XHCI 1.0 errata 8/14/12 Table 13 notes:
404 * "Software should choose xHC BESL/BESLD field values that do not violate a
405 * device's resume latency requirements,
406 * e.g. not program values > '4' if BLC = '1' and a HIRD device is attached,
407 * or not program values < '4' if BLC = '0' and a BESL device is attached.
408 */
409#define XHCI_DEFAULT_BESL 4
410
74c68741 411/**
98441973 412 * struct xhci_intr_reg - Interrupt Register Set
74c68741
SS		 413 * @irq_pending: IMAN - Interrupt Management Register. Used to enable
414 * interrupts and check for pending interrupts.
415 * @irq_control: IMOD - Interrupt Moderation Register.
416 * Used to throttle interrupts.
417 * @erst_size: Number of segments in the Event Ring Segment Table (ERST).
418 * @erst_base: ERST base address.
419 * @erst_dequeue: Event ring dequeue pointer.
420 *
421 * Each interrupter (defined by a MSI-X vector) has an event ring and an Event
422 * Ring Segment Table (ERST) associated with it. The event ring is comprised of
423 * multiple segments of the same size. The HC places events on the ring and
424 * "updates the Cycle bit in the TRBs to indicate to software the current
425 * position of the Enqueue Pointer." The HCD (Linux) processes those events and
426 * updates the dequeue pointer.
427 */
98441973 428struct xhci_intr_reg {
28ccd296
ME		 429 __le32 irq_pending;
430 __le32 irq_control;
431 __le32 erst_size;
432 __le32 rsvd;
433 __le64 erst_base;
434 __le64 erst_dequeue;
98441973 435};
74c68741 436
66d4eadd 437/* irq_pending bitmasks */
74c68741 438#define ER_IRQ_PENDING(p) ((p) & 0x1)
66d4eadd 439/* bits 2:31 need to be preserved */
7f84eef0 440/* THIS IS BUGGY - FIXME - IP IS WRITE 1 TO CLEAR */
66d4eadd
SS		 441#define ER_IRQ_CLEAR(p) ((p) & 0xfffffffe)
442#define ER_IRQ_ENABLE(p) ((ER_IRQ_CLEAR(p)) | 0x2)
443#define ER_IRQ_DISABLE(p) ((ER_IRQ_CLEAR(p)) & ~(0x2))
444
445/* irq_control bitmasks */
446/* Minimum interval between interrupts (in 250ns intervals). The interval
447 * between interrupts will be longer if there are no events on the event ring.
448 * Default is 4000 (1 ms).
449 */
450#define ER_IRQ_INTERVAL_MASK (0xffff)
451/* Counter used to count down the time to the next interrupt - HW use only */
452#define ER_IRQ_COUNTER_MASK (0xffff << 16)
453
454/* erst_size bitmasks */
74c68741 455/* Preserve bits 16:31 of erst_size */
66d4eadd
SS		 456#define ERST_SIZE_MASK (0xffff << 16)
457
458/* erst_dequeue bitmasks */
459/* Dequeue ERST Segment Index (DESI) - Segment number (or alias)
460 * where the current dequeue pointer lies. This is an optional HW hint.
461 */
462#define ERST_DESI_MASK (0x7)
463/* Event Handler Busy (EHB) - is the event ring scheduled to be serviced by
464 * a work queue (or delayed service routine)?
465 */
466#define ERST_EHB (1 << 3)
0ebbab37 467#define ERST_PTR_MASK (0xf)
74c68741
SS		 468
469/**
470 * struct xhci_run_regs
471 * @microframe_index:
472 * MFINDEX - current microframe number
473 *
474 * Section 5.5 Host Controller Runtime Registers:
475 * "Software should read and write these registers using only Dword (32 bit)
476 * or larger accesses"
477 */
478struct xhci_run_regs {
28ccd296
ME		 479 __le32 microframe_index;
480 __le32 rsvd[7];
98441973
SS		 481 struct xhci_intr_reg ir_set[128];
482};
74c68741 483
0ebbab37
SS		 484/**
485 * struct doorbell_array
486 *
50d64676
MW		 487 * Bits 0 - 7: Endpoint target
488 * Bits 8 - 15: RsvdZ
489 * Bits 16 - 31: Stream ID
490 *
0ebbab37
SS		 491 * Section 5.6
492 */
493struct xhci_doorbell_array {
28ccd296 494 __le32 doorbell[256];
98441973 495};
0ebbab37 496
50d64676
MW		 497#define DB_VALUE(ep, stream) ((((ep) + 1) & 0xff) | ((stream) << 16))
498#define DB_VALUE_HOST 0x00000000
0ebbab37 499
da6699ce
SS		 500/**
501 * struct xhci_protocol_caps
502 * @revision: major revision, minor revision, capability ID,
503 * and next capability pointer.
504 * @name_string: Four ASCII characters to say which spec this xHC
505 * follows, typically "USB ".
506 * @port_info: Port offset, count, and protocol-defined information.
507 */
508struct xhci_protocol_caps {
509 u32 revision;
510 u32 name_string;
511 u32 port_info;
512};
513
514#define XHCI_EXT_PORT_MAJOR(x) (((x) >> 24) & 0xff)
515#define XHCI_EXT_PORT_OFF(x) ((x) & 0xff)
516#define XHCI_EXT_PORT_COUNT(x) (((x) >> 8) & 0xff)
517
d115b048
JY		 518/**
519 * struct xhci_container_ctx
520 * @type: Type of context. Used to calculated offsets to contained contexts.
521 * @size: Size of the context data
522 * @bytes: The raw context data given to HW
523 * @dma: dma address of the bytes
524 *
525 * Represents either a Device or Input context. Holds a pointer to the raw
526 * memory used for the context (bytes) and dma address of it (dma).
527 */
528struct xhci_container_ctx {
529 unsigned type;
530#define XHCI_CTX_TYPE_DEVICE 0x1
531#define XHCI_CTX_TYPE_INPUT 0x2
532
533 int size;
534
535 u8 *bytes;
536 dma_addr_t dma;
537};
538
a74588f9
SS		 539/**
540 * struct xhci_slot_ctx
541 * @dev_info: Route string, device speed, hub info, and last valid endpoint
542 * @dev_info2: Max exit latency for device number, root hub port number
543 * @tt_info: tt_info is used to construct split transaction tokens
544 * @dev_state: slot state and device address
545 *
546 * Slot Context - section 6.2.1.1. This assumes the HC uses 32-byte context
547 * structures. If the HC uses 64-byte contexts, there is an additional 32 bytes
548 * reserved at the end of the slot context for HC internal use.
549 */
550struct xhci_slot_ctx {
28ccd296
ME		 551 __le32 dev_info;
552 __le32 dev_info2;
553 __le32 tt_info;
554 __le32 dev_state;
a74588f9 555 /* offset 0x10 to 0x1f reserved for HC internal use */
28ccd296 556 __le32 reserved[4];
98441973 557};
a74588f9
SS		 558
559/* dev_info bitmasks */
560/* Route String - 0:19 */
561#define ROUTE_STRING_MASK (0xfffff)
562/* Device speed - values defined by PORTSC Device Speed field - 20:23 */
563#define DEV_SPEED (0xf << 20)
564/* bit 24 reserved */
565/* Is this LS/FS device connected through a HS hub? - bit 25 */
566#define DEV_MTT (0x1 << 25)
567/* Set if the device is a hub - bit 26 */
568#define DEV_HUB (0x1 << 26)
569/* Index of the last valid endpoint context in this device context - 27:31 */
3ffbba95
SS		 570#define LAST_CTX_MASK (0x1f << 27)
571#define LAST_CTX(p) ((p) << 27)
572#define LAST_CTX_TO_EP_NUM(p) (((p) >> 27) - 1)
3ffbba95
SS		 573#define SLOT_FLAG (1 << 0)
574#define EP0_FLAG (1 << 1)
a74588f9
SS		 575
576/* dev_info2 bitmasks */
577/* Max Exit Latency (ms) - worst case time to wake up all links in dev path */
578#define MAX_EXIT (0xffff)
579/* Root hub port number that is needed to access the USB device */
3ffbba95 580#define ROOT_HUB_PORT(p) (((p) & 0xff) << 16)
be88fe4f 581#define DEVINFO_TO_ROOT_HUB_PORT(p) (((p) >> 16) & 0xff)
ac1c1b7f
SS		 582/* Maximum number of ports under a hub device */
583#define XHCI_MAX_PORTS(p) (((p) & 0xff) << 24)
a74588f9
SS		 584
585/* tt_info bitmasks */
586/*
587 * TT Hub Slot ID - for low or full speed devices attached to a high-speed hub
588 * The Slot ID of the hub that isolates the high speed signaling from
589 * this low or full-speed device. '0' if attached to root hub port.
590 */
591#define TT_SLOT (0xff)
592/*
593 * The number of the downstream facing port of the high-speed hub
594 * '0' if the device is not low or full speed.
595 */
596#define TT_PORT (0xff << 8)
ac1c1b7f 597#define TT_THINK_TIME(p) (((p) & 0x3) << 16)
a74588f9
SS		 598
599/* dev_state bitmasks */
600/* USB device address - assigned by the HC */
3ffbba95 601#define DEV_ADDR_MASK (0xff)
a74588f9
SS		 602/* bits 8:26 reserved */
603/* Slot state */
604#define SLOT_STATE (0x1f << 27)
ae636747 605#define GET_SLOT_STATE(p) (((p) & (0x1f << 27)) >> 27)
a74588f9 606
e2b02177
ML		 607#define SLOT_STATE_DISABLED 0
608#define SLOT_STATE_ENABLED SLOT_STATE_DISABLED
609#define SLOT_STATE_DEFAULT 1
610#define SLOT_STATE_ADDRESSED 2
611#define SLOT_STATE_CONFIGURED 3
a74588f9
SS		 612
613/**
614 * struct xhci_ep_ctx
615 * @ep_info: endpoint state, streams, mult, and interval information.
616 * @ep_info2: information on endpoint type, max packet size, max burst size,
617 * error count, and whether the HC will force an event for all
618 * transactions.
3ffbba95
SS		 619 * @deq: 64-bit ring dequeue pointer address. If the endpoint only
620 * defines one stream, this points to the endpoint transfer ring.
621 * Otherwise, it points to a stream context array, which has a
622 * ring pointer for each flow.
623 * @tx_info:
624 * Average TRB lengths for the endpoint ring and
625 * max payload within an Endpoint Service Interval Time (ESIT).
a74588f9
SS		 626 *
627 * Endpoint Context - section 6.2.1.2. This assumes the HC uses 32-byte context
628 * structures. If the HC uses 64-byte contexts, there is an additional 32 bytes
629 * reserved at the end of the endpoint context for HC internal use.
630 */
631struct xhci_ep_ctx {
28ccd296
ME		 632 __le32 ep_info;
633 __le32 ep_info2;
634 __le64 deq;
635 __le32 tx_info;
a74588f9 636 /* offset 0x14 - 0x1f reserved for HC internal use */
28ccd296 637 __le32 reserved[3];
98441973 638};
a74588f9
SS		 639
640/* ep_info bitmasks */
641/*
642 * Endpoint State - bits 0:2
643 * 0 - disabled
644 * 1 - running
645 * 2 - halted due to halt condition - ok to manipulate endpoint ring
646 * 3 - stopped
647 * 4 - TRB error
648 * 5-7 - reserved
649 */
d0e96f5a
SS		 650#define EP_STATE_MASK (0xf)
651#define EP_STATE_DISABLED 0
652#define EP_STATE_RUNNING 1
653#define EP_STATE_HALTED 2
654#define EP_STATE_STOPPED 3
655#define EP_STATE_ERROR 4
a74588f9 656/* Mult - Max number of burtst within an interval, in EP companion desc. */
5a6c2f3f 657#define EP_MULT(p) (((p) & 0x3) << 8)
9af5d71d 658#define CTX_TO_EP_MULT(p) (((p) >> 8) & 0x3)
a74588f9
SS		 659/* bits 10:14 are Max Primary Streams */
660/* bit 15 is Linear Stream Array */
661/* Interval - period between requests to an endpoint - 125u increments. */
5a6c2f3f 662#define EP_INTERVAL(p) (((p) & 0xff) << 16)
624defa1 663#define EP_INTERVAL_TO_UFRAMES(p) (1 << (((p) >> 16) & 0xff))
9af5d71d 664#define CTX_TO_EP_INTERVAL(p) (((p) >> 16) & 0xff)
8df75f42
SS		 665#define EP_MAXPSTREAMS_MASK (0x1f << 10)
666#define EP_MAXPSTREAMS(p) (((p) << 10) & EP_MAXPSTREAMS_MASK)
667/* Endpoint is set up with a Linear Stream Array (vs. Secondary Stream Array) */
668#define EP_HAS_LSA (1 << 15)
a74588f9
SS		 669
670/* ep_info2 bitmasks */
671/*
672 * Force Event - generate transfer events for all TRBs for this endpoint
673 * This will tell the HC to ignore the IOC and ISP flags (for debugging only).
674 */
675#define FORCE_EVENT (0x1)
676#define ERROR_COUNT(p) (((p) & 0x3) << 1)
82d1009f 677#define CTX_TO_EP_TYPE(p) (((p) >> 3) & 0x7)
a74588f9
SS		 678#define EP_TYPE(p) ((p) << 3)
679#define ISOC_OUT_EP 1
680#define BULK_OUT_EP 2
681#define INT_OUT_EP 3
682#define CTRL_EP 4
683#define ISOC_IN_EP 5
684#define BULK_IN_EP 6
685#define INT_IN_EP 7
686/* bit 6 reserved */
687/* bit 7 is Host Initiate Disable - for disabling stream selection */
688#define MAX_BURST(p) (((p)&0xff) << 8)
9af5d71d 689#define CTX_TO_MAX_BURST(p) (((p) >> 8) & 0xff)
a74588f9 690#define MAX_PACKET(p) (((p)&0xffff) << 16)
2d3f1fac
SS		 691#define MAX_PACKET_MASK (0xffff << 16)
692#define MAX_PACKET_DECODED(p) (((p) >> 16) & 0xffff)
a74588f9 693
dc07c91b
AX		 694/* Get max packet size from ep desc. Bit 10..0 specify the max packet size.
695 * USB2.0 spec 9.6.6.
696 */
697#define GET_MAX_PACKET(p) ((p) & 0x7ff)
698
9238f25d
SS		 699/* tx_info bitmasks */
700#define AVG_TRB_LENGTH_FOR_EP(p) ((p) & 0xffff)
701#define MAX_ESIT_PAYLOAD_FOR_EP(p) (((p) & 0xffff) << 16)
9af5d71d 702#define CTX_TO_MAX_ESIT_PAYLOAD(p) (((p) >> 16) & 0xffff)
9238f25d 703
bf161e85
SS		 704/* deq bitmasks */
705#define EP_CTX_CYCLE_MASK (1 << 0)
706
a74588f9
SS		 707
708/**
d115b048
JY		 709 * struct xhci_input_control_context
710 * Input control context; see section 6.2.5.
a74588f9
SS		 711 *
712 * @drop_context: set the bit of the endpoint context you want to disable
713 * @add_context: set the bit of the endpoint context you want to enable
714 */
d115b048 715struct xhci_input_control_ctx {
28ccd296
ME		 716 __le32 drop_flags;
717 __le32 add_flags;
718 __le32 rsvd2[6];
98441973 719};
a74588f9 720
9af5d71d
SS		 721#define EP_IS_ADDED(ctrl_ctx, i) \
722 (le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1)))
723#define EP_IS_DROPPED(ctrl_ctx, i) \
724 (le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1)))
725
913a8a34
SS		 726/* Represents everything that is needed to issue a command on the command ring.
727 * It's useful to pre-allocate these for commands that cannot fail due to
728 * out-of-memory errors, like freeing streams.
729 */
730struct xhci_command {
731 /* Input context for changing device state */
732 struct xhci_container_ctx *in_ctx;
733 u32 status;
734 /* If completion is null, no one is waiting on this command
735 * and the structure can be freed after the command completes.
736 */
737 struct completion *completion;
738 union xhci_trb *command_trb;
739 struct list_head cmd_list;
740};
741
a74588f9
SS		 742/* drop context bitmasks */
743#define DROP_EP(x) (0x1 << x)
744/* add context bitmasks */
745#define ADD_EP(x) (0x1 << x)
746
8df75f42
SS		 747struct xhci_stream_ctx {
748 /* 64-bit stream ring address, cycle state, and stream type */
28ccd296 749 __le64 stream_ring;
8df75f42 750 /* offset 0x14 - 0x1f reserved for HC internal use */
28ccd296 751 __le32 reserved[2];
8df75f42
SS		 752};
753
754/* Stream Context Types (section 6.4.1) - bits 3:1 of stream ctx deq ptr */
755#define SCT_FOR_CTX(p) (((p) << 1) & 0x7)
756/* Secondary stream array type, dequeue pointer is to a transfer ring */
757#define SCT_SEC_TR 0
758/* Primary stream array type, dequeue pointer is to a transfer ring */
759#define SCT_PRI_TR 1
760/* Dequeue pointer is for a secondary stream array (SSA) with 8 entries */
761#define SCT_SSA_8 2
762#define SCT_SSA_16 3
763#define SCT_SSA_32 4
764#define SCT_SSA_64 5
765#define SCT_SSA_128 6
766#define SCT_SSA_256 7
767
768/* Assume no secondary streams for now */
769struct xhci_stream_info {
770 struct xhci_ring **stream_rings;
771 /* Number of streams, including stream 0 (which drivers can't use) */
772 unsigned int num_streams;
773 /* The stream context array may be bigger than
774 * the number of streams the driver asked for
775 */
776 struct xhci_stream_ctx *stream_ctx_array;
777 unsigned int num_stream_ctxs;
778 dma_addr_t ctx_array_dma;
779 /* For mapping physical TRB addresses to segments in stream rings */
780 struct radix_tree_root trb_address_map;
781 struct xhci_command *free_streams_command;
782};
783
784#define SMALL_STREAM_ARRAY_SIZE 256
785#define MEDIUM_STREAM_ARRAY_SIZE 1024
786
9af5d71d
SS		 787/* Some Intel xHCI host controllers need software to keep track of the bus
788 * bandwidth. Keep track of endpoint info here. Each root port is allocated
789 * the full bus bandwidth. We must also treat TTs (including each port under a
790 * multi-TT hub) as a separate bandwidth domain. The direct memory interface
791 * (DMI) also limits the total bandwidth (across all domains) that can be used.
792 */
793struct xhci_bw_info {
170c0263 794 /* ep_interval is zero-based */
9af5d71d 795 unsigned int ep_interval;
170c0263 796 /* mult and num_packets are one-based */
9af5d71d
SS		 797 unsigned int mult;
798 unsigned int num_packets;
799 unsigned int max_packet_size;
800 unsigned int max_esit_payload;
801 unsigned int type;
802};
803
c29eea62
SS		 804/* "Block" sizes in bytes the hardware uses for different device speeds.
805 * The logic in this part of the hardware limits the number of bits the hardware
806 * can use, so must represent bandwidth in a less precise manner to mimic what
807 * the scheduler hardware computes.
808 */
809#define FS_BLOCK 1
810#define HS_BLOCK 4
811#define SS_BLOCK 16
812#define DMI_BLOCK 32
813
814/* Each device speed has a protocol overhead (CRC, bit stuffing, etc) associated
815 * with each byte transferred. SuperSpeed devices have an initial overhead to
816 * set up bursts. These are in blocks, see above. LS overhead has already been
817 * translated into FS blocks.
818 */
819#define DMI_OVERHEAD 8
820#define DMI_OVERHEAD_BURST 4
821#define SS_OVERHEAD 8
822#define SS_OVERHEAD_BURST 32
823#define HS_OVERHEAD 26
824#define FS_OVERHEAD 20
825#define LS_OVERHEAD 128
826/* The TTs need to claim roughly twice as much bandwidth (94 bytes per
827 * microframe ~= 24Mbps) of the HS bus as the devices can actually use because
828 * of overhead associated with split transfers crossing microframe boundaries.
829 * 31 blocks is pure protocol overhead.
830 */
831#define TT_HS_OVERHEAD (31 + 94)
832#define TT_DMI_OVERHEAD (25 + 12)
833
834/* Bandwidth limits in blocks */
835#define FS_BW_LIMIT 1285
836#define TT_BW_LIMIT 1320
837#define HS_BW_LIMIT 1607
838#define SS_BW_LIMIT_IN 3906
839#define DMI_BW_LIMIT_IN 3906
840#define SS_BW_LIMIT_OUT 3906
841#define DMI_BW_LIMIT_OUT 3906
842
843/* Percentage of bus bandwidth reserved for non-periodic transfers */
844#define FS_BW_RESERVED 10
845#define HS_BW_RESERVED 20
2b698999 846#define SS_BW_RESERVED 10
c29eea62 847
63a0d9ab
SS		 848struct xhci_virt_ep {
849 struct xhci_ring *ring;
8df75f42
SS		 850 /* Related to endpoints that are configured to use stream IDs only */
851 struct xhci_stream_info *stream_info;
63a0d9ab
SS		 852 /* Temporary storage in case the configure endpoint command fails and we
853 * have to restore the device state to the previous state
854 */
855 struct xhci_ring *new_ring;
856 unsigned int ep_state;
857#define SET_DEQ_PENDING (1 << 0)
678539cf
SS		 858#define EP_HALTED (1 << 1) /* For stall handling */
859#define EP_HALT_PENDING (1 << 2) /* For URB cancellation */
8df75f42
SS		 860/* Transitioning the endpoint to using streams, don't enqueue URBs */
861#define EP_GETTING_STREAMS (1 << 3)
862#define EP_HAS_STREAMS (1 << 4)
863/* Transitioning the endpoint to not using streams, don't enqueue URBs */
864#define EP_GETTING_NO_STREAMS (1 << 5)
63a0d9ab
SS		 865 /* ---- Related to URB cancellation ---- */
866 struct list_head cancelled_td_list;
63a0d9ab
SS		 867 /* The TRB that was last reported in a stopped endpoint ring */
868 union xhci_trb *stopped_trb;
869 struct xhci_td *stopped_td;
e9df17eb 870 unsigned int stopped_stream;
6f5165cf
SS		 871 /* Watchdog timer for stop endpoint command to cancel URBs */
872 struct timer_list stop_cmd_timer;
873 int stop_cmds_pending;
874 struct xhci_hcd *xhci;
bf161e85
SS		 875 /* Dequeue pointer and dequeue segment for a submitted Set TR Dequeue
876 * command. We'll need to update the ring's dequeue segment and dequeue
877 * pointer after the command completes.
878 */
879 struct xhci_segment *queued_deq_seg;
880 union xhci_trb *queued_deq_ptr;
d18240db
AX		 881 /*
882 * Sometimes the xHC can not process isochronous endpoint ring quickly
883 * enough, and it will miss some isoc tds on the ring and generate
884 * a Missed Service Error Event.
885 * Set skip flag when receive a Missed Service Error Event and
886 * process the missed tds on the endpoint ring.
887 */
888 bool skip;
2e27980e 889 /* Bandwidth checking storage */
9af5d71d 890 struct xhci_bw_info bw_info;
2e27980e 891 struct list_head bw_endpoint_list;
63a0d9ab
SS		 892};
893
839c817c
SS		 894enum xhci_overhead_type {
895 LS_OVERHEAD_TYPE = 0,
896 FS_OVERHEAD_TYPE,
897 HS_OVERHEAD_TYPE,
898};
899
900struct xhci_interval_bw {
901 unsigned int num_packets;
2e27980e
SS		 902 /* Sorted by max packet size.
903 * Head of the list is the greatest max packet size.
904 */
905 struct list_head endpoints;
839c817c
SS		 906 /* How many endpoints of each speed are present. */
907 unsigned int overhead[3];
908};
909
910#define XHCI_MAX_INTERVAL 16
911
912struct xhci_interval_bw_table {
913 unsigned int interval0_esit_payload;
914 struct xhci_interval_bw interval_bw[XHCI_MAX_INTERVAL];
c29eea62
SS		 915 /* Includes reserved bandwidth for async endpoints */
916 unsigned int bw_used;
2b698999
SS		 917 unsigned int ss_bw_in;
918 unsigned int ss_bw_out;
839c817c
SS		 919};
920
921
3ffbba95 922struct xhci_virt_device {
64927730 923 struct usb_device *udev;
3ffbba95
SS		 924 /*
925 * Commands to the hardware are passed an "input context" that
926 * tells the hardware what to change in its data structures.
927 * The hardware will return changes in an "output context" that
928 * software must allocate for the hardware. We need to keep
929 * track of input and output contexts separately because
930 * these commands might fail and we don't trust the hardware.
931 */
d115b048 932 struct xhci_container_ctx *out_ctx;
3ffbba95 933 /* Used for addressing devices and configuration changes */
d115b048 934 struct xhci_container_ctx *in_ctx;
74f9fe21
SS		 935 /* Rings saved to ensure old alt settings can be re-instated */
936 struct xhci_ring **ring_cache;
937 int num_rings_cached;
938#define XHCI_MAX_RINGS_CACHED 31
63a0d9ab 939 struct xhci_virt_ep eps[31];
f94e0186 940 struct completion cmd_completion;
3ffbba95
SS		 941 /* Status of the last command issued for this device */
942 u32 cmd_status;
913a8a34 943 struct list_head cmd_list;
fe30182c 944 u8 fake_port;
66381755 945 u8 real_port;
839c817c
SS		 946 struct xhci_interval_bw_table *bw_table;
947 struct xhci_tt_bw_info *tt_info;
3b3db026
SS		 948 /* The current max exit latency for the enabled USB3 link states. */
949 u16 current_mel;
839c817c
SS		 950};
951
952/*
953 * For each roothub, keep track of the bandwidth information for each periodic
954 * interval.
955 *
956 * If a high speed hub is attached to the roothub, each TT associated with that
957 * hub is a separate bandwidth domain. The interval information for the
958 * endpoints on the devices under that TT will appear in the TT structure.
959 */
960struct xhci_root_port_bw_info {
961 struct list_head tts;
962 unsigned int num_active_tts;
963 struct xhci_interval_bw_table bw_table;
964};
965
966struct xhci_tt_bw_info {
967 struct list_head tt_list;
968 int slot_id;
969 int ttport;
970 struct xhci_interval_bw_table bw_table;
971 int active_eps;
3ffbba95
SS		 972};
973
974
a74588f9
SS		 975/**
976 * struct xhci_device_context_array
977 * @dev_context_ptr array of 64-bit DMA addresses for device contexts
978 */
979struct xhci_device_context_array {
980 /* 64-bit device addresses; we only write 32-bit addresses */
28ccd296 981 __le64 dev_context_ptrs[MAX_HC_SLOTS];
a74588f9
SS		 982 /* private xHCD pointers */
983 dma_addr_t dma;
98441973 984};
a74588f9
SS		 985/* TODO: write function to set the 64-bit device DMA address */
986/*
987 * TODO: change this to be dynamically sized at HC mem init time since the HC
988 * might not be able to handle the maximum number of devices possible.
989 */
990
991
0ebbab37
SS		 992struct xhci_transfer_event {
993 /* 64-bit buffer address, or immediate data */
28ccd296
ME		 994 __le64 buffer;
995 __le32 transfer_len;
0ebbab37 996 /* This field is interpreted differently based on the type of TRB */
28ccd296 997 __le32 flags;
98441973 998};
0ebbab37 999
1c11a172
VG		 1000/* Transfer event TRB length bit mask */
1001/* bits 0:23 */
1002#define EVENT_TRB_LEN(p) ((p) & 0xffffff)
1003
d0e96f5a
SS		 1004/** Transfer Event bit fields **/
1005#define TRB_TO_EP_ID(p) (((p) >> 16) & 0x1f)
1006
0ebbab37
SS		 1007/* Completion Code - only applicable for some types of TRBs */
1008#define COMP_CODE_MASK (0xff << 24)
1009#define GET_COMP_CODE(p) (((p) & COMP_CODE_MASK) >> 24)
1010#define COMP_SUCCESS 1
1011/* Data Buffer Error */
1012#define COMP_DB_ERR 2
1013/* Babble Detected Error */
1014#define COMP_BABBLE 3
1015/* USB Transaction Error */
1016#define COMP_TX_ERR 4
1017/* TRB Error - some TRB field is invalid */
1018#define COMP_TRB_ERR 5
1019/* Stall Error - USB device is stalled */
1020#define COMP_STALL 6
1021/* Resource Error - HC doesn't have memory for that device configuration */
1022#define COMP_ENOMEM 7
1023/* Bandwidth Error - not enough room in schedule for this dev config */
1024#define COMP_BW_ERR 8
1025/* No Slots Available Error - HC ran out of device slots */
1026#define COMP_ENOSLOTS 9
1027/* Invalid Stream Type Error */
1028#define COMP_STREAM_ERR 10
1029/* Slot Not Enabled Error - doorbell rung for disabled device slot */
1030#define COMP_EBADSLT 11
1031/* Endpoint Not Enabled Error */
1032#define COMP_EBADEP 12
1033/* Short Packet */
1034#define COMP_SHORT_TX 13
1035/* Ring Underrun - doorbell rung for an empty isoc OUT ep ring */
1036#define COMP_UNDERRUN 14
1037/* Ring Overrun - isoc IN ep ring is empty when ep is scheduled to RX */
1038#define COMP_OVERRUN 15
1039/* Virtual Function Event Ring Full Error */
1040#define COMP_VF_FULL 16
1041/* Parameter Error - Context parameter is invalid */
1042#define COMP_EINVAL 17
1043/* Bandwidth Overrun Error - isoc ep exceeded its allocated bandwidth */
1044#define COMP_BW_OVER 18
1045/* Context State Error - illegal context state transition requested */
1046#define COMP_CTX_STATE 19
1047/* No Ping Response Error - HC didn't get PING_RESPONSE in time to TX */
1048#define COMP_PING_ERR 20
1049/* Event Ring is full */
1050#define COMP_ER_FULL 21
f6ba6fe2
AH		 1051/* Incompatible Device Error */
1052#define COMP_DEV_ERR 22
0ebbab37
SS		 1053/* Missed Service Error - HC couldn't service an isoc ep within interval */
1054#define COMP_MISSED_INT 23
1055/* Successfully stopped command ring */
1056#define COMP_CMD_STOP 24
1057/* Successfully aborted current command and stopped command ring */
1058#define COMP_CMD_ABORT 25
1059/* Stopped - transfer was terminated by a stop endpoint command */
1060#define COMP_STOP 26
25985edc 1061/* Same as COMP_EP_STOPPED, but the transferred length in the event is invalid */
0ebbab37
SS		 1062#define COMP_STOP_INVAL 27
1063/* Control Abort Error - Debug Capability - control pipe aborted */
1064#define COMP_DBG_ABORT 28
1bb73a88
AH		 1065/* Max Exit Latency Too Large Error */
1066#define COMP_MEL_ERR 29
1067/* TRB type 30 reserved */
0ebbab37
SS		 1068/* Isoc Buffer Overrun - an isoc IN ep sent more data than could fit in TD */
1069#define COMP_BUFF_OVER 31
1070/* Event Lost Error - xHC has an "internal event overrun condition" */
1071#define COMP_ISSUES 32
1072/* Undefined Error - reported when other error codes don't apply */
1073#define COMP_UNKNOWN 33
1074/* Invalid Stream ID Error */
1075#define COMP_STRID_ERR 34
1076/* Secondary Bandwidth Error - may be returned by a Configure Endpoint cmd */
0ebbab37
SS		 1077#define COMP_2ND_BW_ERR 35
1078/* Split Transaction Error */
1079#define COMP_SPLIT_ERR 36
1080
1081struct xhci_link_trb {
1082 /* 64-bit segment pointer*/
28ccd296
ME		 1083 __le64 segment_ptr;
1084 __le32 intr_target;
1085 __le32 control;
98441973 1086};
0ebbab37
SS		 1087
1088/* control bitfields */
1089#define LINK_TOGGLE (0x1<<1)
1090
7f84eef0
SS		 1091/* Command completion event TRB */
1092struct xhci_event_cmd {
1093 /* Pointer to command TRB, or the value passed by the event data trb */
28ccd296
ME		 1094 __le64 cmd_trb;
1095 __le32 status;
1096 __le32 flags;
98441973 1097};
0ebbab37 1098
3ffbba95
SS		 1099/* flags bitmasks */
1100/* bits 16:23 are the virtual function ID */
1101/* bits 24:31 are the slot ID */
1102#define TRB_TO_SLOT_ID(p) (((p) & (0xff<<24)) >> 24)
1103#define SLOT_ID_FOR_TRB(p) (((p) & 0xff) << 24)
0ebbab37 1104
ae636747
SS		 1105/* Stop Endpoint TRB - ep_index to endpoint ID for this TRB */
1106#define TRB_TO_EP_INDEX(p) ((((p) & (0x1f << 16)) >> 16) - 1)
1107#define EP_ID_FOR_TRB(p) ((((p) + 1) & 0x1f) << 16)
1108
be88fe4f
AX		 1109#define SUSPEND_PORT_FOR_TRB(p) (((p) & 1) << 23)
1110#define TRB_TO_SUSPEND_PORT(p) (((p) & (1 << 23)) >> 23)
1111#define LAST_EP_INDEX 30
1112
e9df17eb
SS		 1113/* Set TR Dequeue Pointer command TRB fields */
1114#define TRB_TO_STREAM_ID(p) ((((p) & (0xffff << 16)) >> 16))
1115#define STREAM_ID_FOR_TRB(p) ((((p)) & 0xffff) << 16)
1116
ae636747 1117
0f2a7930
SS		 1118/* Port Status Change Event TRB fields */
1119/* Port ID - bits 31:24 */
1120#define GET_PORT_ID(p) (((p) & (0xff << 24)) >> 24)
1121
0ebbab37
SS		 1122/* Normal TRB fields */
1123/* transfer_len bitmasks - bits 0:16 */
1124#define TRB_LEN(p) ((p) & 0x1ffff)
0ebbab37
SS		 1125/* Interrupter Target - which MSI-X vector to target the completion event at */
1126#define TRB_INTR_TARGET(p) (((p) & 0x3ff) << 22)
1127#define GET_INTR_TARGET(p) (((p) >> 22) & 0x3ff)
5cd43e33 1128#define TRB_TBC(p) (((p) & 0x3) << 7)
b61d378f 1129#define TRB_TLBPC(p) (((p) & 0xf) << 16)
0ebbab37
SS		 1130
1131/* Cycle bit - indicates TRB ownership by HC or HCD */
1132#define TRB_CYCLE (1<<0)
1133/*
1134 * Force next event data TRB to be evaluated before task switch.
1135 * Used to pass OS data back after a TD completes.
1136 */
1137#define TRB_ENT (1<<1)
1138/* Interrupt on short packet */
1139#define TRB_ISP (1<<2)
1140/* Set PCIe no snoop attribute */
1141#define TRB_NO_SNOOP (1<<3)
1142/* Chain multiple TRBs into a TD */
1143#define TRB_CHAIN (1<<4)
1144/* Interrupt on completion */
1145#define TRB_IOC (1<<5)
1146/* The buffer pointer contains immediate data */
1147#define TRB_IDT (1<<6)
1148
ad106f29
AX		 1149/* Block Event Interrupt */
1150#define TRB_BEI (1<<9)
0ebbab37
SS		 1151
1152/* Control transfer TRB specific fields */
1153#define TRB_DIR_IN (1<<16)
b83cdc8f
AX		 1154#define TRB_TX_TYPE(p) ((p) << 16)
1155#define TRB_DATA_OUT 2
1156#define TRB_DATA_IN 3
0ebbab37 1157
04e51901
AX		 1158/* Isochronous TRB specific fields */
1159#define TRB_SIA (1<<31)
1160
7f84eef0 1161struct xhci_generic_trb {
28ccd296 1162 __le32 field[4];
98441973 1163};
7f84eef0
SS		 1164
1165union xhci_trb {
1166 struct xhci_link_trb link;
1167 struct xhci_transfer_event trans_event;
1168 struct xhci_event_cmd event_cmd;
1169 struct xhci_generic_trb generic;
1170};
1171
0ebbab37
SS		 1172/* TRB bit mask */
1173#define TRB_TYPE_BITMASK (0xfc00)
1174#define TRB_TYPE(p) ((p) << 10)
0238634d 1175#define TRB_FIELD_TO_TYPE(p) (((p) & TRB_TYPE_BITMASK) >> 10)
0ebbab37
SS		 1176/* TRB type IDs */
1177/* bulk, interrupt, isoc scatter/gather, and control data stage */
1178#define TRB_NORMAL 1
1179/* setup stage for control transfers */
1180#define TRB_SETUP 2
1181/* data stage for control transfers */
1182#define TRB_DATA 3
1183/* status stage for control transfers */
1184#define TRB_STATUS 4
1185/* isoc transfers */
1186#define TRB_ISOC 5
1187/* TRB for linking ring segments */
1188#define TRB_LINK 6
1189#define TRB_EVENT_DATA 7
1190/* Transfer Ring No-op (not for the command ring) */
1191#define TRB_TR_NOOP 8
1192/* Command TRBs */
1193/* Enable Slot Command */
1194#define TRB_ENABLE_SLOT 9
1195/* Disable Slot Command */
1196#define TRB_DISABLE_SLOT 10
1197/* Address Device Command */
1198#define TRB_ADDR_DEV 11
1199/* Configure Endpoint Command */
1200#define TRB_CONFIG_EP 12
1201/* Evaluate Context Command */
1202#define TRB_EVAL_CONTEXT 13
a1587d97
SS		 1203/* Reset Endpoint Command */
1204#define TRB_RESET_EP 14
0ebbab37
SS		 1205/* Stop Transfer Ring Command */
1206#define TRB_STOP_RING 15
1207/* Set Transfer Ring Dequeue Pointer Command */
1208#define TRB_SET_DEQ 16
1209/* Reset Device Command */
1210#define TRB_RESET_DEV 17
1211/* Force Event Command (opt) */
1212#define TRB_FORCE_EVENT 18
1213/* Negotiate Bandwidth Command (opt) */
1214#define TRB_NEG_BANDWIDTH 19
1215/* Set Latency Tolerance Value Command (opt) */
1216#define TRB_SET_LT 20
1217/* Get port bandwidth Command */
1218#define TRB_GET_BW 21
1219/* Force Header Command - generate a transaction or link management packet */
1220#define TRB_FORCE_HEADER 22
1221/* No-op Command - not for transfer rings */
1222#define TRB_CMD_NOOP 23
1223/* TRB IDs 24-31 reserved */
1224/* Event TRBS */
1225/* Transfer Event */
1226#define TRB_TRANSFER 32
1227/* Command Completion Event */
1228#define TRB_COMPLETION 33
1229/* Port Status Change Event */
1230#define TRB_PORT_STATUS 34
1231/* Bandwidth Request Event (opt) */
1232#define TRB_BANDWIDTH_EVENT 35
1233/* Doorbell Event (opt) */
1234#define TRB_DOORBELL 36
1235/* Host Controller Event */
1236#define TRB_HC_EVENT 37
1237/* Device Notification Event - device sent function wake notification */
1238#define TRB_DEV_NOTE 38
1239/* MFINDEX Wrap Event - microframe counter wrapped */
1240#define TRB_MFINDEX_WRAP 39
1241/* TRB IDs 40-47 reserved, 48-63 is vendor-defined */
1242
0238634d
SS		 1243/* Nec vendor-specific command completion event. */
1244#define TRB_NEC_CMD_COMP 48
1245/* Get NEC firmware revision. */
1246#define TRB_NEC_GET_FW 49
1247
f5960b69
ME		 1248#define TRB_TYPE_LINK(x) (((x) & TRB_TYPE_BITMASK) == TRB_TYPE(TRB_LINK))
1249/* Above, but for __le32 types -- can avoid work by swapping constants: */
1250#define TRB_TYPE_LINK_LE32(x) (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
1251 cpu_to_le32(TRB_TYPE(TRB_LINK)))
1252#define TRB_TYPE_NOOP_LE32(x) (((x) & cpu_to_le32(TRB_TYPE_BITMASK)) == \
1253 cpu_to_le32(TRB_TYPE(TRB_TR_NOOP)))
1254
0238634d
SS		 1255#define NEC_FW_MINOR(p) (((p) >> 0) & 0xff)
1256#define NEC_FW_MAJOR(p) (((p) >> 8) & 0xff)
1257
0ebbab37
SS		 1258/*
1259 * TRBS_PER_SEGMENT must be a multiple of 4,
1260 * since the command ring is 64-byte aligned.
1261 * It must also be greater than 16.
1262 */
1263#define TRBS_PER_SEGMENT 64
913a8a34
SS		 1264/* Allow two commands + a link TRB, along with any reserved command TRBs */
1265#define MAX_RSVD_CMD_TRBS (TRBS_PER_SEGMENT - 3)
eb8ccd2b
DH		 1266#define TRB_SEGMENT_SIZE (TRBS_PER_SEGMENT*16)
1267#define TRB_SEGMENT_SHIFT (ilog2(TRB_SEGMENT_SIZE))
b10de142
SS		 1268/* TRB buffer pointers can't cross 64KB boundaries */
1269#define TRB_MAX_BUFF_SHIFT 16
1270#define TRB_MAX_BUFF_SIZE (1 << TRB_MAX_BUFF_SHIFT)
0ebbab37
SS		 1271
1272struct xhci_segment {
1273 union xhci_trb *trbs;
1274 /* private to HCD */
1275 struct xhci_segment *next;
1276 dma_addr_t dma;
98441973 1277};
0ebbab37 1278
ae636747
SS		 1279struct xhci_td {
1280 struct list_head td_list;
1281 struct list_head cancelled_td_list;
1282 struct urb *urb;
1283 struct xhci_segment *start_seg;
1284 union xhci_trb *first_trb;
1285 union xhci_trb *last_trb;
1286};
1287
6e4468b9
EF		 1288/* xHCI command default timeout value */
1289#define XHCI_CMD_DEFAULT_TIMEOUT (5 * HZ)
1290
b92cc66c
EF		 1291/* command descriptor */
1292struct xhci_cd {
1293 struct list_head cancel_cmd_list;
1294 struct xhci_command *command;
1295 union xhci_trb *cmd_trb;
1296};
1297
ac9d8fe7
SS		 1298struct xhci_dequeue_state {
1299 struct xhci_segment *new_deq_seg;
1300 union xhci_trb *new_deq_ptr;
1301 int new_cycle_state;
1302};
1303
3b72fca0
AX		 1304enum xhci_ring_type {
1305 TYPE_CTRL = 0,
1306 TYPE_ISOC,
1307 TYPE_BULK,
1308 TYPE_INTR,
1309 TYPE_STREAM,
1310 TYPE_COMMAND,
1311 TYPE_EVENT,
1312};
1313
0ebbab37
SS		 1314struct xhci_ring {
1315 struct xhci_segment *first_seg;
3fe4fe08 1316 struct xhci_segment *last_seg;
0ebbab37 1317 union xhci_trb *enqueue;
7f84eef0
SS		 1318 struct xhci_segment *enq_seg;
1319 unsigned int enq_updates;
0ebbab37 1320 union xhci_trb *dequeue;
7f84eef0
SS		 1321 struct xhci_segment *deq_seg;
1322 unsigned int deq_updates;
d0e96f5a 1323 struct list_head td_list;
0ebbab37
SS		 1324 /*
1325 * Write the cycle state into the TRB cycle field to give ownership of
1326 * the TRB to the host controller (if we are the producer), or to check
1327 * if we own the TRB (if we are the consumer). See section 4.9.1.
1328 */
1329 u32 cycle_state;
e9df17eb 1330 unsigned int stream_id;
3fe4fe08 1331 unsigned int num_segs;
b008df60
AX		 1332 unsigned int num_trbs_free;
1333 unsigned int num_trbs_free_temp;
3b72fca0 1334 enum xhci_ring_type type;
ad808333 1335 bool last_td_was_short;
0ebbab37
SS		 1336};
1337
1338struct xhci_erst_entry {
1339 /* 64-bit event ring segment address */
28ccd296
ME		 1340 __le64 seg_addr;
1341 __le32 seg_size;
0ebbab37 1342 /* Set to zero */
28ccd296 1343 __le32 rsvd;
98441973 1344};
0ebbab37
SS		 1345
1346struct xhci_erst {
1347 struct xhci_erst_entry *entries;
1348 unsigned int num_entries;
1349 /* xhci->event_ring keeps track of segment dma addresses */
1350 dma_addr_t erst_dma_addr;
1351 /* Num entries the ERST can contain */
1352 unsigned int erst_size;
1353};
1354
254c80a3
JY		 1355struct xhci_scratchpad {
1356 u64 *sp_array;
1357 dma_addr_t sp_dma;
1358 void **sp_buffers;
1359 dma_addr_t *sp_dma_buffers;
1360};
1361
8e51adcc
AX		 1362struct urb_priv {
1363 int length;
1364 int td_cnt;
1365 struct xhci_td *td[0];
1366};
1367
0ebbab37
SS		 1368/*
1369 * Each segment table entry is 4*32bits long. 1K seems like an ok size:
1370 * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
1371 * meaning 64 ring segments.
1372 * Initial allocated size of the ERST, in number of entries */
1373#define ERST_NUM_SEGS 1
1374/* Initial allocated size of the ERST, in number of entries */
1375#define ERST_SIZE 64
1376/* Initial number of event segment rings allocated */
1377#define ERST_ENTRIES 1
7f84eef0
SS		 1378/* Poll every 60 seconds */
1379#define POLL_TIMEOUT 60
6f5165cf
SS		 1380/* Stop endpoint command timeout (secs) for URB cancellation watchdog timer */
1381#define XHCI_STOP_EP_CMD_TIMEOUT 5
0ebbab37
SS		 1382/* XXX: Make these module parameters */
1383
5535b1d5
AX		 1384struct s3_save {
1385 u32 command;
1386 u32 dev_nt;
1387 u64 dcbaa_ptr;
1388 u32 config_reg;
1389 u32 irq_pending;
1390 u32 irq_control;
1391 u32 erst_size;
1392 u64 erst_base;
1393 u64 erst_dequeue;
1394};
74c68741 1395
9574323c
AX		 1396/* Use for lpm */
1397struct dev_info {
1398 u32 dev_id;
1399 struct list_head list;
1400};
1401
20b67cf5
SS		 1402struct xhci_bus_state {
1403 unsigned long bus_suspended;
1404 unsigned long next_statechange;
1405
1406 /* Port suspend arrays are indexed by the portnum of the fake roothub */
1407 /* ports suspend status arrays - max 31 ports for USB2, 15 for USB3 */
1408 u32 port_c_suspend;
1409 u32 suspended_ports;
4ee823b8 1410 u32 port_remote_wakeup;
20b67cf5 1411 unsigned long resume_done[USB_MAXCHILDREN];
f370b996
AX		 1412 /* which ports have started to resume */
1413 unsigned long resuming_ports;
8b3d4570
SS		 1414 /* Which ports are waiting on RExit to U0 transition. */
1415 unsigned long rexit_ports;
1416 struct completion rexit_done[USB_MAXCHILDREN];
20b67cf5
SS		 1417};
1418
8b3d4570
SS		 1419
1420/*
1421 * It can take up to 20 ms to transition from RExit to U0 on the
1422 * Intel Lynx Point LP xHCI host.
1423 */
1424#define XHCI_MAX_REXIT_TIMEOUT (20 * 1000)
1425
20b67cf5
SS		 1426static inline unsigned int hcd_index(struct usb_hcd *hcd)
1427{
f6ff0ac8
SS		 1428 if (hcd->speed == HCD_USB3)
1429 return 0;
1430 else
1431 return 1;
20b67cf5
SS		 1432}
1433
05103114 1434/* There is one xhci_hcd structure per controller */
74c68741 1435struct xhci_hcd {
b02d0ed6 1436 struct usb_hcd *main_hcd;
f6ff0ac8 1437 struct usb_hcd *shared_hcd;
74c68741
SS		 1438 /* glue to PCI and HCD framework */
1439 struct xhci_cap_regs __iomem *cap_regs;
1440 struct xhci_op_regs __iomem *op_regs;
1441 struct xhci_run_regs __iomem *run_regs;
0ebbab37 1442 struct xhci_doorbell_array __iomem *dba;
66d4eadd 1443 /* Our HCD's current interrupter register set */
98441973 1444 struct xhci_intr_reg __iomem *ir_set;
74c68741
SS		 1445
1446 /* Cached register copies of read-only HC data */
1447 __u32 hcs_params1;
1448 __u32 hcs_params2;
1449 __u32 hcs_params3;
1450 __u32 hcc_params;
1451
1452 spinlock_t lock;
1453
1454 /* packed release number */
1455 u8 sbrn;
1456 u16 hci_version;
1457 u8 max_slots;
1458 u8 max_interrupters;
1459 u8 max_ports;
1460 u8 isoc_threshold;
1461 int event_ring_max;
1462 int addr_64;
66d4eadd 1463 /* 4KB min, 128MB max */
74c68741 1464 int page_size;
66d4eadd
SS		 1465 /* Valid values are 12 to 20, inclusive */
1466 int page_shift;
43b86af8 1467 /* msi-x vectors */
66d4eadd
SS		 1468 int msix_count;
1469 struct msix_entry *msix_entries;
0ebbab37 1470 /* data structures */
a74588f9 1471 struct xhci_device_context_array *dcbaa;
0ebbab37 1472 struct xhci_ring *cmd_ring;
c181bc5b
EF		 1473 unsigned int cmd_ring_state;
1474#define CMD_RING_STATE_RUNNING (1 << 0)
1475#define CMD_RING_STATE_ABORTED (1 << 1)
1476#define CMD_RING_STATE_STOPPED (1 << 2)
b92cc66c 1477 struct list_head cancel_cmd_list;
913a8a34 1478 unsigned int cmd_ring_reserved_trbs;
0ebbab37
SS		 1479 struct xhci_ring *event_ring;
1480 struct xhci_erst erst;
254c80a3
JY		 1481 /* Scratchpad */
1482 struct xhci_scratchpad *scratchpad;
9574323c
AX		 1483 /* Store LPM test failed devices' information */
1484 struct list_head lpm_failed_devs;
254c80a3 1485
3ffbba95
SS		 1486 /* slot enabling and address device helpers */
1487 struct completion addr_dev;
1488 int slot_id;
dbc33303
SS		 1489 /* For USB 3.0 LPM enable/disable. */
1490 struct xhci_command *lpm_command;
3ffbba95
SS		 1491 /* Internal mirror of the HW's dcbaa */
1492 struct xhci_virt_device *devs[MAX_HC_SLOTS];
839c817c
SS		 1493 /* For keeping track of bandwidth domains per roothub. */
1494 struct xhci_root_port_bw_info *rh_bw;
0ebbab37
SS		 1495
1496 /* DMA pools */
1497 struct dma_pool *device_pool;
1498 struct dma_pool *segment_pool;
8df75f42
SS		 1499 struct dma_pool *small_streams_pool;
1500 struct dma_pool *medium_streams_pool;
7f84eef0 1501
6f5165cf
SS		 1502 /* Host controller watchdog timer structures */
1503 unsigned int xhc_state;
9777e3ce 1504
9777e3ce 1505 u32 command;
5535b1d5 1506 struct s3_save s3;
6f5165cf
SS		 1507/* Host controller is dying - not responding to commands. "I'm not dead yet!"
1508 *
1509 * xHC interrupts have been disabled and a watchdog timer will (or has already)
1510 * halt the xHCI host, and complete all URBs with an -ESHUTDOWN code. Any code
1511 * that sees this status (other than the timer that set it) should stop touching
1512 * hardware immediately. Interrupt handlers should return immediately when
1513 * they see this status (any time they drop and re-acquire xhci->lock).
1514 * xhci_urb_dequeue() should call usb_hcd_check_unlink_urb() and return without
1515 * putting the TD on the canceled list, etc.
1516 *
1517 * There are no reports of xHCI host controllers that display this issue.
1518 */
1519#define XHCI_STATE_DYING (1 << 0)
c6cc27c7 1520#define XHCI_STATE_HALTED (1 << 1)
7f84eef0 1521 /* Statistics */
7f84eef0 1522 int error_bitmask;
b0567b3f
SS		 1523 unsigned int quirks;
1524#define XHCI_LINK_TRB_QUIRK (1 << 0)
ac9d8fe7 1525#define XHCI_RESET_EP_QUIRK (1 << 1)
0238634d 1526#define XHCI_NEC_HOST (1 << 2)
c41136b0 1527#define XHCI_AMD_PLL_FIX (1 << 3)
ad808333 1528#define XHCI_SPURIOUS_SUCCESS (1 << 4)
2cf95c18
SS		 1529/*
1530 * Certain Intel host controllers have a limit to the number of endpoint
1531 * contexts they can handle. Ideally, they would signal that they can't handle
1532 * anymore endpoint contexts by returning a Resource Error for the Configure
1533 * Endpoint command, but they don't. Instead they expect software to keep track
1534 * of the number of active endpoints for them, across configure endpoint
1535 * commands, reset device commands, disable slot commands, and address device
1536 * commands.
1537 */
1538#define XHCI_EP_LIMIT_QUIRK (1 << 5)
f5182b41 1539#define XHCI_BROKEN_MSI (1 << 6)
c877b3b2 1540#define XHCI_RESET_ON_RESUME (1 << 7)
c29eea62 1541#define XHCI_SW_BW_CHECKING (1 << 8)
7e393a83 1542#define XHCI_AMD_0x96_HOST (1 << 9)
1530bbc6 1543#define XHCI_TRUST_TX_LENGTH (1 << 10)
3b3db026 1544#define XHCI_LPM_SUPPORT (1 << 11)
e3567d2c 1545#define XHCI_INTEL_HOST (1 << 12)
e95829f4 1546#define XHCI_SPURIOUS_REBOOT (1 << 13)
71c731a2 1547#define XHCI_COMP_MODE_QUIRK (1 << 14)
80fab3b2 1548#define XHCI_AVOID_BEI (1 << 15)
52fb6125 1549#define XHCI_PLAT (1 << 16)
455f5892 1550#define XHCI_SLOW_SUSPEND (1 << 17)
638298dc 1551#define XHCI_SPURIOUS_WAKEUP (1 << 18)
2cf95c18
SS		 1552 unsigned int num_active_eps;
1553 unsigned int limit_active_eps;
f6ff0ac8
SS		 1554 /* There are two roothubs to keep track of bus suspend info for */
1555 struct xhci_bus_state bus_state[2];
da6699ce
SS		 1556 /* Is each xHCI roothub port a USB 3.0, USB 2.0, or USB 1.1 port? */
1557 u8 *port_array;
1558 /* Array of pointers to USB 3.0 PORTSC registers */
28ccd296 1559 __le32 __iomem **usb3_ports;
da6699ce
SS		 1560 unsigned int num_usb3_ports;
1561 /* Array of pointers to USB 2.0 PORTSC registers */
28ccd296 1562 __le32 __iomem **usb2_ports;
da6699ce 1563 unsigned int num_usb2_ports;
fc71ff75
AX		 1564 /* support xHCI 0.96 spec USB2 software LPM */
1565 unsigned sw_lpm_support:1;
1566 /* support xHCI 1.0 spec USB2 hardware LPM */
1567 unsigned hw_lpm_support:1;
b630d4b9
MN		 1568 /* cached usb2 extened protocol capabilites */
1569 u32 *ext_caps;
1570 unsigned int num_ext_caps;
71c731a2
AC		 1571 /* Compliance Mode Recovery Data */
1572 struct timer_list comp_mode_recovery_timer;
1573 u32 port_status_u0;
1574/* Compliance Mode Timer Triggered every 2 seconds */
1575#define COMP_MODE_RCVRY_MSECS 2000
74c68741
SS		 1576};
1577
1578/* convert between an HCD pointer and the corresponding EHCI_HCD */
1579static inline struct xhci_hcd *hcd_to_xhci(struct usb_hcd *hcd)
1580{
b02d0ed6 1581 return *((struct xhci_hcd **) (hcd->hcd_priv));
74c68741
SS		 1582}
1583
1584static inline struct usb_hcd *xhci_to_hcd(struct xhci_hcd *xhci)
1585{
b02d0ed6 1586 return xhci->main_hcd;
74c68741
SS		 1587}
1588
74c68741 1589#define xhci_dbg(xhci, fmt, args...) \
b2497509 1590 dev_dbg(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
74c68741
SS		 1591#define xhci_err(xhci, fmt, args...) \
1592 dev_err(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
1593#define xhci_warn(xhci, fmt, args...) \
1594 dev_warn(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
8202ce2e
SS		 1595#define xhci_warn_ratelimited(xhci, fmt, args...) \
1596 dev_warn_ratelimited(xhci_to_hcd(xhci)->self.controller , fmt , ## args)
74c68741
SS		 1597
1598/* TODO: copied from ehci.h - can be refactored? */
1599/* xHCI spec says all registers are little endian */
1600static inline unsigned int xhci_readl(const struct xhci_hcd *xhci,
28ccd296 1601 __le32 __iomem *regs)
74c68741
SS		 1602{
1603 return readl(regs);
1604}
045f123d 1605static inline void xhci_writel(struct xhci_hcd *xhci,
28ccd296 1606 const unsigned int val, __le32 __iomem *regs)
74c68741 1607{
74c68741
SS		 1608 writel(val, regs);
1609}
1610
8e595a5d
SS		 1611/*
1612 * Registers should always be accessed with double word or quad word accesses.
1613 *
1614 * Some xHCI implementations may support 64-bit address pointers. Registers
1615 * with 64-bit address pointers should be written to with dword accesses by
1616 * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
1617 * xHCI implementations that do not support 64-bit address pointers will ignore
1618 * the high dword, and write order is irrelevant.
1619 */
1620static inline u64 xhci_read_64(const struct xhci_hcd *xhci,
28ccd296 1621 __le64 __iomem *regs)
8e595a5d
SS		 1622{
1623 __u32 __iomem *ptr = (__u32 __iomem *) regs;
1624 u64 val_lo = readl(ptr);
1625 u64 val_hi = readl(ptr + 1);
1626 return val_lo + (val_hi << 32);
1627}
1628static inline void xhci_write_64(struct xhci_hcd *xhci,
28ccd296 1629 const u64 val, __le64 __iomem *regs)
8e595a5d
SS		 1630{
1631 __u32 __iomem *ptr = (__u32 __iomem *) regs;
1632 u32 val_lo = lower_32_bits(val);
1633 u32 val_hi = upper_32_bits(val);
1634
8e595a5d
SS		 1635 writel(val_lo, ptr);
1636 writel(val_hi, ptr + 1);
1637}
1638
b0567b3f
SS		 1639static inline int xhci_link_trb_quirk(struct xhci_hcd *xhci)
1640{
d7826599 1641 return xhci->quirks & XHCI_LINK_TRB_QUIRK;
b0567b3f
SS		 1642}
1643
66d4eadd 1644/* xHCI debugging */
09ece30e 1645void xhci_print_ir_set(struct xhci_hcd *xhci, int set_num);
66d4eadd 1646void xhci_print_registers(struct xhci_hcd *xhci);
0ebbab37
SS		 1647void xhci_dbg_regs(struct xhci_hcd *xhci);
1648void xhci_print_run_regs(struct xhci_hcd *xhci);
d0e96f5a
SS		 1649void xhci_print_trb_offsets(struct xhci_hcd *xhci, union xhci_trb *trb);
1650void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb);
7f84eef0 1651void xhci_debug_segment(struct xhci_hcd *xhci, struct xhci_segment *seg);
0ebbab37
SS		 1652void xhci_debug_ring(struct xhci_hcd *xhci, struct xhci_ring *ring);
1653void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst);
1654void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci);
7f84eef0 1655void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring);
d115b048 1656void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep);
9c9a7dbf 1657char *xhci_get_slot_state(struct xhci_hcd *xhci,
2a8f82c4 1658 struct xhci_container_ctx *ctx);
e9df17eb
SS		 1659void xhci_dbg_ep_rings(struct xhci_hcd *xhci,
1660 unsigned int slot_id, unsigned int ep_index,
1661 struct xhci_virt_ep *ep);
84a99f6f
XR		 1662void xhci_dbg_trace(struct xhci_hcd *xhci, void (*trace)(struct va_format *),
1663 const char *fmt, ...);
66d4eadd 1664
3dbda77e 1665/* xHCI memory management */
66d4eadd
SS		 1666void xhci_mem_cleanup(struct xhci_hcd *xhci);
1667int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags);
3ffbba95
SS		 1668void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id);
1669int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id, struct usb_device *udev, gfp_t flags);
1670int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *udev);
2d1ee590
SS		 1671void xhci_copy_ep0_dequeue_into_input_ctx(struct xhci_hcd *xhci,
1672 struct usb_device *udev);
d0e96f5a 1673unsigned int xhci_get_endpoint_index(struct usb_endpoint_descriptor *desc);
01c5f447 1674unsigned int xhci_get_endpoint_address(unsigned int ep_index);
f94e0186 1675unsigned int xhci_get_endpoint_flag(struct usb_endpoint_descriptor *desc);
ac9d8fe7
SS		 1676unsigned int xhci_get_endpoint_flag_from_index(unsigned int ep_index);
1677unsigned int xhci_last_valid_endpoint(u32 added_ctxs);
f94e0186 1678void xhci_endpoint_zero(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev, struct usb_host_endpoint *ep);
2e27980e
SS		 1679void xhci_drop_ep_from_interval_table(struct xhci_hcd *xhci,
1680 struct xhci_bw_info *ep_bw,
1681 struct xhci_interval_bw_table *bw_table,
1682 struct usb_device *udev,
1683 struct xhci_virt_ep *virt_ep,
1684 struct xhci_tt_bw_info *tt_info);
1685void xhci_update_tt_active_eps(struct xhci_hcd *xhci,
1686 struct xhci_virt_device *virt_dev,
1687 int old_active_eps);
9af5d71d
SS		 1688void xhci_clear_endpoint_bw_info(struct xhci_bw_info *bw_info);
1689void xhci_update_bw_info(struct xhci_hcd *xhci,
1690 struct xhci_container_ctx *in_ctx,
1691 struct xhci_input_control_ctx *ctrl_ctx,
1692 struct xhci_virt_device *virt_dev);
f2217e8e 1693void xhci_endpoint_copy(struct xhci_hcd *xhci,
913a8a34
SS		 1694 struct xhci_container_ctx *in_ctx,
1695 struct xhci_container_ctx *out_ctx,
1696 unsigned int ep_index);
1697void xhci_slot_copy(struct xhci_hcd *xhci,
1698 struct xhci_container_ctx *in_ctx,
1699 struct xhci_container_ctx *out_ctx);
f88ba78d
SS		 1700int xhci_endpoint_init(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev,
1701 struct usb_device *udev, struct usb_host_endpoint *ep,
1702 gfp_t mem_flags);
f94e0186 1703void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring);
8dfec614
AX		 1704int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring,
1705 unsigned int num_trbs, gfp_t flags);
412566bd
SS		 1706void xhci_free_or_cache_endpoint_ring(struct xhci_hcd *xhci,
1707 struct xhci_virt_device *virt_dev,
1708 unsigned int ep_index);
8df75f42
SS		 1709struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
1710 unsigned int num_stream_ctxs,
1711 unsigned int num_streams, gfp_t flags);
1712void xhci_free_stream_info(struct xhci_hcd *xhci,
1713 struct xhci_stream_info *stream_info);
1714void xhci_setup_streams_ep_input_ctx(struct xhci_hcd *xhci,
1715 struct xhci_ep_ctx *ep_ctx,
1716 struct xhci_stream_info *stream_info);
1717void xhci_setup_no_streams_ep_input_ctx(struct xhci_hcd *xhci,
1718 struct xhci_ep_ctx *ep_ctx,
1719 struct xhci_virt_ep *ep);
2cf95c18
SS		 1720void xhci_free_device_endpoint_resources(struct xhci_hcd *xhci,
1721 struct xhci_virt_device *virt_dev, bool drop_control_ep);
e9df17eb
SS		 1722struct xhci_ring *xhci_dma_to_transfer_ring(
1723 struct xhci_virt_ep *ep,
1724 u64 address);
e9df17eb
SS		 1725struct xhci_ring *xhci_stream_id_to_ring(
1726 struct xhci_virt_device *dev,
1727 unsigned int ep_index,
1728 unsigned int stream_id);
913a8a34 1729struct xhci_command *xhci_alloc_command(struct xhci_hcd *xhci,
a1d78c16
SS		 1730 bool allocate_in_ctx, bool allocate_completion,
1731 gfp_t mem_flags);
8e51adcc 1732void xhci_urb_free_priv(struct xhci_hcd *xhci, struct urb_priv *urb_priv);
913a8a34
SS		 1733void xhci_free_command(struct xhci_hcd *xhci,
1734 struct xhci_command *command);
66d4eadd
SS		 1735
1736#ifdef CONFIG_PCI
1737/* xHCI PCI glue */
1738int xhci_register_pci(void);
1739void xhci_unregister_pci(void);
0cc47d54
SAS		 1740#else
1741static inline int xhci_register_pci(void) { return 0; }
1742static inline void xhci_unregister_pci(void) {}
66d4eadd
SS		 1743#endif
1744
3429e91a
SAS		 1745#if defined(CONFIG_USB_XHCI_PLATFORM) \
1746 || defined(CONFIG_USB_XHCI_PLATFORM_MODULE)
1747int xhci_register_plat(void);
1748void xhci_unregister_plat(void);
1749#else
1750static inline int xhci_register_plat(void)
1751{ return 0; }
1752static inline void xhci_unregister_plat(void)
1753{ }
1754#endif
1755
66d4eadd 1756/* xHCI host controller glue */
552e0c4f 1757typedef void (*xhci_get_quirks_t)(struct device *, struct xhci_hcd *);
2611bd18 1758int xhci_handshake(struct xhci_hcd *xhci, void __iomem *ptr,
b92cc66c 1759 u32 mask, u32 done, int usec);
4f0f0bae 1760void xhci_quiesce(struct xhci_hcd *xhci);
66d4eadd
SS		 1761int xhci_halt(struct xhci_hcd *xhci);
1762int xhci_reset(struct xhci_hcd *xhci);
1763int xhci_init(struct usb_hcd *hcd);
1764int xhci_run(struct usb_hcd *hcd);
1765void xhci_stop(struct usb_hcd *hcd);
1766void xhci_shutdown(struct usb_hcd *hcd);
552e0c4f 1767int xhci_gen_setup(struct usb_hcd *hcd, xhci_get_quirks_t get_quirks);
436a3890
SS		 1768
1769#ifdef CONFIG_PM
5535b1d5
AX		 1770int xhci_suspend(struct xhci_hcd *xhci);
1771int xhci_resume(struct xhci_hcd *xhci, bool hibernated);
436a3890
SS		 1772#else
1773#define xhci_suspend NULL
1774#define xhci_resume NULL
1775#endif
1776
66d4eadd 1777int xhci_get_frame(struct usb_hcd *hcd);
7f84eef0 1778irqreturn_t xhci_irq(struct usb_hcd *hcd);
851ec164 1779irqreturn_t xhci_msi_irq(int irq, void *hcd);
3ffbba95
SS		 1780int xhci_alloc_dev(struct usb_hcd *hcd, struct usb_device *udev);
1781void xhci_free_dev(struct usb_hcd *hcd, struct usb_device *udev);
839c817c
SS		 1782int xhci_alloc_tt_info(struct xhci_hcd *xhci,
1783 struct xhci_virt_device *virt_dev,
1784 struct usb_device *hdev,
1785 struct usb_tt *tt, gfp_t mem_flags);
8df75f42
SS		 1786int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev,
1787 struct usb_host_endpoint **eps, unsigned int num_eps,
1788 unsigned int num_streams, gfp_t mem_flags);
1789int xhci_free_streams(struct usb_hcd *hcd, struct usb_device *udev,
1790 struct usb_host_endpoint **eps, unsigned int num_eps,
1791 gfp_t mem_flags);
3ffbba95 1792int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev);
9574323c 1793int xhci_update_device(struct usb_hcd *hcd, struct usb_device *udev);
65580b43
AX		 1794int xhci_set_usb2_hardware_lpm(struct usb_hcd *hcd,
1795 struct usb_device *udev, int enable);
ac1c1b7f
SS		 1796int xhci_update_hub_device(struct usb_hcd *hcd, struct usb_device *hdev,
1797 struct usb_tt *tt, gfp_t mem_flags);
d0e96f5a
SS		 1798int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags);
1799int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
f94e0186
SS		 1800int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
1801int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
a1587d97 1802void xhci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep);
f0615c45 1803int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev);
f94e0186
SS		 1804int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
1805void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
7f84eef0
SS		 1806
1807/* xHCI ring, segment, TRB, and TD functions */
23e3be11 1808dma_addr_t xhci_trb_virt_to_dma(struct xhci_segment *seg, union xhci_trb *trb);
6648f29d
SS		 1809struct xhci_segment *trb_in_td(struct xhci_segment *start_seg,
1810 union xhci_trb *start_trb, union xhci_trb *end_trb,
1811 dma_addr_t suspect_dma);
b45b5069 1812int xhci_is_vendor_info_code(struct xhci_hcd *xhci, unsigned int trb_comp_code);
23e3be11 1813void xhci_ring_cmd_db(struct xhci_hcd *xhci);
23e3be11
SS		 1814int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id);
1815int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
1816 u32 slot_id);
0238634d
SS		 1817int xhci_queue_vendor_command(struct xhci_hcd *xhci,
1818 u32 field1, u32 field2, u32 field3, u32 field4);
23e3be11 1819int xhci_queue_stop_endpoint(struct xhci_hcd *xhci, int slot_id,
be88fe4f 1820 unsigned int ep_index, int suspend);
23e3be11
SS		 1821int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
1822 int slot_id, unsigned int ep_index);
1823int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
1824 int slot_id, unsigned int ep_index);
624defa1
SS		 1825int xhci_queue_intr_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
1826 int slot_id, unsigned int ep_index);
04e51901
AX		 1827int xhci_queue_isoc_tx_prepare(struct xhci_hcd *xhci, gfp_t mem_flags,
1828 struct urb *urb, int slot_id, unsigned int ep_index);
23e3be11 1829int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
913a8a34 1830 u32 slot_id, bool command_must_succeed);
f2217e8e 1831int xhci_queue_evaluate_context(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
4b266541 1832 u32 slot_id, bool command_must_succeed);
a1587d97
SS		 1833int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
1834 unsigned int ep_index);
2a8f82c4 1835int xhci_queue_reset_device(struct xhci_hcd *xhci, u32 slot_id);
c92bcfa7
SS		 1836void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
1837 unsigned int slot_id, unsigned int ep_index,
e9df17eb
SS		 1838 unsigned int stream_id, struct xhci_td *cur_td,
1839 struct xhci_dequeue_state *state);
c92bcfa7 1840void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
63a0d9ab 1841 unsigned int slot_id, unsigned int ep_index,
e9df17eb 1842 unsigned int stream_id,
63a0d9ab 1843 struct xhci_dequeue_state *deq_state);
82d1009f 1844void xhci_cleanup_stalled_ring(struct xhci_hcd *xhci,
63a0d9ab 1845 struct usb_device *udev, unsigned int ep_index);
ac9d8fe7
SS		 1846void xhci_queue_config_ep_quirk(struct xhci_hcd *xhci,
1847 unsigned int slot_id, unsigned int ep_index,
1848 struct xhci_dequeue_state *deq_state);
6f5165cf 1849void xhci_stop_endpoint_command_watchdog(unsigned long arg);
b92cc66c
EF		 1850int xhci_cancel_cmd(struct xhci_hcd *xhci, struct xhci_command *command,
1851 union xhci_trb *cmd_trb);
be88fe4f
AX		 1852void xhci_ring_ep_doorbell(struct xhci_hcd *xhci, unsigned int slot_id,
1853 unsigned int ep_index, unsigned int stream_id);
ec7e43e2 1854union xhci_trb *xhci_find_next_enqueue(struct xhci_ring *ring);
66d4eadd 1855
0f2a7930 1856/* xHCI roothub code */
c9682dff
AX		 1857void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array,
1858 int port_id, u32 link_state);
3b3db026
SS		 1859int xhci_enable_usb3_lpm_timeout(struct usb_hcd *hcd,
1860 struct usb_device *udev, enum usb3_link_state state);
1861int xhci_disable_usb3_lpm_timeout(struct usb_hcd *hcd,
1862 struct usb_device *udev, enum usb3_link_state state);
d2f52c9e
AX		 1863void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array,
1864 int port_id, u32 port_bit);
0f2a7930
SS		 1865int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
1866 char *buf, u16 wLength);
1867int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
3f5eb141 1868int xhci_find_raw_port_number(struct usb_hcd *hcd, int port1);
436a3890
SS		 1869
1870#ifdef CONFIG_PM
9777e3ce
AX		 1871int xhci_bus_suspend(struct usb_hcd *hcd);
1872int xhci_bus_resume(struct usb_hcd *hcd);
436a3890
SS		 1873#else
1874#define xhci_bus_suspend NULL
1875#define xhci_bus_resume NULL
1876#endif /* CONFIG_PM */
1877
56192531 1878u32 xhci_port_state_to_neutral(u32 state);
5233630f
SS		 1879int xhci_find_slot_id_by_port(struct usb_hcd *hcd, struct xhci_hcd *xhci,
1880 u16 port);
56192531 1881void xhci_ring_device(struct xhci_hcd *xhci, int slot_id);
0f2a7930 1882
d115b048
JY		 1883/* xHCI contexts */
1884struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
1885struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
1886struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index);
1887
c3897aa5
SS		 1888/* xHCI quirks */
1889bool xhci_compliance_mode_recovery_timer_quirk_check(void);
1890
74c68741 1891#endif /* __LINUX_XHCI_HCD_H */
Linux 6.x block layer and io_uring tree(s)