[linux-2.6-block.git] / drivers / usb / host / xhci-pci.c

/*
 * xHCI host controller driver PCI Bus Glue.
 *
 * Copyright (C) 2008 Intel Corp.
 *
 * Author: Sarah Sharp
 * Some code borrowed from the Linux EHCI driver.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
 * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software Foundation,
 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/module.h>
#include <linux/acpi.h>

#include "xhci.h"
#include "xhci-trace.h"

#define PORT2_SSIC_CONFIG_REG2	0x883c
#define PROG_DONE		(1 << 30)
#define SSIC_PORT_UNUSED	(1 << 31)

/* Device for a quirk */
#define PCI_VENDOR_ID_FRESCO_LOGIC	0x1b73
#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK	0x1000
#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400	0x1400

#define PCI_VENDOR_ID_ETRON		0x1b6f
#define PCI_DEVICE_ID_EJ168		0x7023

#define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI	0x8c31
#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI	0x9c31
#define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI		0x22b5
#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI		0xa12f
#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI	0x9d2f

static const char hcd_name[] = "xhci_hcd";

static struct hc_driver __read_mostly xhci_pci_hc_driver;

static int xhci_pci_setup(struct usb_hcd *hcd);

static const struct xhci_driver_overrides xhci_pci_overrides __initconst = {
	.reset = xhci_pci_setup,
};

/* called after powerup, by probe or system-pm "wakeup" */
static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)
{
	/*
	 * TODO: Implement finding debug ports later.
	 * TODO: see if there are any quirks that need to be added to handle
	 * new extended capabilities.
	 */

	/* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
	if (!pci_set_mwi(pdev))
		xhci_dbg(xhci, "MWI active\n");

	xhci_dbg(xhci, "Finished xhci_pci_reinit\n");
	return 0;
}

static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
{
	struct pci_dev		*pdev = to_pci_dev(dev);

	/* Look for vendor-specific quirks */
	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
			(pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK ||
			 pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) {
		if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
				pdev->revision == 0x0) {
			xhci->quirks |= XHCI_RESET_EP_QUIRK;
			xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
				"QUIRK: Fresco Logic xHC needs configure"
				" endpoint cmd after reset endpoint");
		}
		if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
				pdev->revision == 0x4) {
			xhci->quirks |= XHCI_SLOW_SUSPEND;
			xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
				"QUIRK: Fresco Logic xHC revision %u"
				"must be suspended extra slowly",
				pdev->revision);
		}
		if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK)
			xhci->quirks |= XHCI_BROKEN_STREAMS;
		/* Fresco Logic confirms: all revisions of this chip do not
		 * support MSI, even though some of them claim to in their PCI
		 * capabilities.
		 */
		xhci->quirks |= XHCI_BROKEN_MSI;
		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
				"QUIRK: Fresco Logic revision %u "
				"has broken MSI implementation",
				pdev->revision);
		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
	}

	if (pdev->vendor == PCI_VENDOR_ID_NEC)
		xhci->quirks |= XHCI_NEC_HOST;

	if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96)
		xhci->quirks |= XHCI_AMD_0x96_HOST;

	/* AMD PLL quirk */
	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
		xhci->quirks |= XHCI_AMD_PLL_FIX;

	if (pdev->vendor == PCI_VENDOR_ID_AMD)
		xhci->quirks |= XHCI_TRUST_TX_LENGTH;

	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
		xhci->quirks |= XHCI_LPM_SUPPORT;
		xhci->quirks |= XHCI_INTEL_HOST;
		xhci->quirks |= XHCI_AVOID_BEI;
	}
	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
			pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
		xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
		xhci->limit_active_eps = 64;
		xhci->quirks |= XHCI_SW_BW_CHECKING;
		/*
		 * PPT desktop boards DH77EB and DH77DF will power back on after
		 * a few seconds of being shutdown.  The fix for this is to
		 * switch the ports from xHCI to EHCI on shutdown.  We can't use
		 * DMI information to find those particular boards (since each
		 * vendor will change the board name), so we have to key off all
		 * PPT chipsets.
		 */
		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
	}
	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
		pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) {
		xhci->quirks |= XHCI_SPURIOUS_REBOOT;
		xhci->quirks |= XHCI_SPURIOUS_WAKEUP;
	}
	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
		(pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI ||
		 pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI ||
		 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI)) {
		xhci->quirks |= XHCI_PME_STUCK_QUIRK;
	}
	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
			pdev->device == PCI_DEVICE_ID_EJ168) {
		xhci->quirks |= XHCI_RESET_ON_RESUME;
		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
		xhci->quirks |= XHCI_BROKEN_STREAMS;
	}
	if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
			pdev->device == 0x0015)
		xhci->quirks |= XHCI_RESET_ON_RESUME;
	if (pdev->vendor == PCI_VENDOR_ID_VIA)
		xhci->quirks |= XHCI_RESET_ON_RESUME;

	/* See https://bugzilla.kernel.org/show_bug.cgi?id=79511 */
	if (pdev->vendor == PCI_VENDOR_ID_VIA &&
			pdev->device == 0x3432)
		xhci->quirks |= XHCI_BROKEN_STREAMS;

	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
			pdev->device == 0x1042)
		xhci->quirks |= XHCI_BROKEN_STREAMS;

	if (xhci->quirks & XHCI_RESET_ON_RESUME)
		xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
				"QUIRK: Resetting on resume");
}

#ifdef CONFIG_ACPI
static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev)
{
	static const u8 intel_dsm_uuid[] = {
		0xb7, 0x0c, 0x34, 0xac,	0x01, 0xe9, 0xbf, 0x45,
		0xb7, 0xe6, 0x2b, 0x34, 0xec, 0x93, 0x1e, 0x23,
	};
	union acpi_object *obj;

	obj = acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), intel_dsm_uuid, 3, 1,
				NULL);
	ACPI_FREE(obj);
}
#else
static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
#endif /* CONFIG_ACPI */

/* called during probe() after chip reset completes */
static int xhci_pci_setup(struct usb_hcd *hcd)
{
	struct xhci_hcd		*xhci;
	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
	int			retval;

	xhci = hcd_to_xhci(hcd);
	if (!xhci->sbrn)
		pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);

	retval = xhci_gen_setup(hcd, xhci_pci_quirks);
	if (retval)
		return retval;

	if (!usb_hcd_is_primary_hcd(hcd))
		return 0;

	xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn);

	/* Find any debug ports */
	retval = xhci_pci_reinit(xhci, pdev);
	if (!retval)
		return retval;

	return retval;
}

/*
 * We need to register our own PCI probe function (instead of the USB core's
 * function) in order to create a second roothub under xHCI.
 */
static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
	int retval;
	struct xhci_hcd *xhci;
	struct hc_driver *driver;
	struct usb_hcd *hcd;

	driver = (struct hc_driver *)id->driver_data;

	/* Prevent runtime suspending between USB-2 and USB-3 initialization */
	pm_runtime_get_noresume(&dev->dev);

	/* Register the USB 2.0 roothub.
	 * FIXME: USB core must know to register the USB 2.0 roothub first.
	 * This is sort of silly, because we could just set the HCD driver flags
	 * to say USB 2.0, but I'm not sure what the implications would be in
	 * the other parts of the HCD code.
	 */
	retval = usb_hcd_pci_probe(dev, id);

	if (retval)
		goto put_runtime_pm;

	/* USB 2.0 roothub is stored in the PCI device now. */
	hcd = dev_get_drvdata(&dev->dev);
	xhci = hcd_to_xhci(hcd);
	xhci->shared_hcd = usb_create_shared_hcd(driver, &dev->dev,
				pci_name(dev), hcd);
	if (!xhci->shared_hcd) {
		retval = -ENOMEM;
		goto dealloc_usb2_hcd;
	}

	retval = usb_add_hcd(xhci->shared_hcd, dev->irq,
			IRQF_SHARED);
	if (retval)
		goto put_usb3_hcd;
	/* Roothub already marked as USB 3.0 speed */

	if (!(xhci->quirks & XHCI_BROKEN_STREAMS) &&
			HCC_MAX_PSA(xhci->hcc_params) >= 4)
		xhci->shared_hcd->can_do_streams = 1;

	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
		xhci_pme_acpi_rtd3_enable(dev);

	/* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */
	pm_runtime_put_noidle(&dev->dev);

	return 0;

put_usb3_hcd:
	usb_put_hcd(xhci->shared_hcd);
dealloc_usb2_hcd:
	usb_hcd_pci_remove(dev);
put_runtime_pm:
	pm_runtime_put_noidle(&dev->dev);
	return retval;
}

static void xhci_pci_remove(struct pci_dev *dev)
{
	struct xhci_hcd *xhci;

	xhci = hcd_to_xhci(pci_get_drvdata(dev));
	if (xhci->shared_hcd) {
		usb_remove_hcd(xhci->shared_hcd);
		usb_put_hcd(xhci->shared_hcd);
	}
	usb_hcd_pci_remove(dev);

	/* Workaround for spurious wakeups at shutdown with HSW */
	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
		pci_set_power_state(dev, PCI_D3hot);
}

#ifdef CONFIG_PM
/*
 * In some Intel xHCI controllers, in order to get D3 working,
 * through a vendor specific SSIC CONFIG register at offset 0x883c,
 * SSIC PORT need to be marked as "unused" before putting xHCI
 * into D3. After D3 exit, the SSIC port need to be marked as "used".
 * Without this change, xHCI might not enter D3 state.
 * Make sure PME works on some Intel xHCI controllers by writing 1 to clear
 * the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
 */
static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend)
{
	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
	u32 val;
	void __iomem *reg;

	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
		 pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) {

		reg = (void __iomem *) xhci->cap_regs + PORT2_SSIC_CONFIG_REG2;

		/* Notify SSIC that SSIC profile programming is not done */
		val = readl(reg) & ~PROG_DONE;
		writel(val, reg);

		/* Mark SSIC port as unused(suspend) or used(resume) */
		val = readl(reg);
		if (suspend)
			val |= SSIC_PORT_UNUSED;
		else
			val &= ~SSIC_PORT_UNUSED;
		writel(val, reg);

		/* Notify SSIC that SSIC profile programming is done */
		val = readl(reg) | PROG_DONE;
		writel(val, reg);
		readl(reg);
	}

	reg = (void __iomem *) xhci->cap_regs + 0x80a4;
	val = readl(reg);
	writel(val | BIT(28), reg);
	readl(reg);
}

static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
{
	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);

	/*
	 * Systems with the TI redriver that loses port status change events
	 * need to have the registers polled during D3, so avoid D3cold.
	 */
	if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
		pdev->no_d3cold = true;

	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
		xhci_pme_quirk(hcd, true);

	return xhci_suspend(xhci, do_wakeup);
}

static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
{
	struct xhci_hcd		*xhci = hcd_to_xhci(hcd);
	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
	int			retval = 0;

	/* The BIOS on systems with the Intel Panther Point chipset may or may
	 * not support xHCI natively.  That means that during system resume, it
	 * may switch the ports back to EHCI so that users can use their
	 * keyboard to select a kernel from GRUB after resume from hibernate.
	 *
	 * The BIOS is supposed to remember whether the OS had xHCI ports
	 * enabled before resume, and switch the ports back to xHCI when the
	 * BIOS/OS semaphore is written, but we all know we can't trust BIOS
	 * writers.
	 *
	 * Unconditionally switch the ports back to xHCI after a system resume.
	 * It should not matter whether the EHCI or xHCI controller is
	 * resumed first. It's enough to do the switchover in xHCI because
	 * USB core won't notice anything as the hub driver doesn't start
	 * running again until after all the devices (including both EHCI and
	 * xHCI host controllers) have been resumed.
	 */

	if (pdev->vendor == PCI_VENDOR_ID_INTEL)
		usb_enable_intel_xhci_ports(pdev);

	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
		xhci_pme_quirk(hcd, false);

	retval = xhci_resume(xhci, hibernated);
	return retval;
}
#endif /* CONFIG_PM */

/*-------------------------------------------------------------------------*/

/* PCI driver selection metadata; PCI hotplugging uses this */
static const struct pci_device_id pci_ids[] = { {
	/* handle any USB 3.0 xHCI controller */
	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0),
	.driver_data =	(unsigned long) &xhci_pci_hc_driver,
	},
	{ /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE(pci, pci_ids);

/* pci driver glue; this is a "new style" PCI driver module */
static struct pci_driver xhci_pci_driver = {
	.name =		(char *) hcd_name,
	.id_table =	pci_ids,

	.probe =	xhci_pci_probe,
	.remove =	xhci_pci_remove,
	/* suspend and resume implemented later */

	.shutdown = 	usb_hcd_pci_shutdown,
#ifdef CONFIG_PM
	.driver = {
		.pm = &usb_hcd_pci_pm_ops
	},
#endif
};

static int __init xhci_pci_init(void)
{
	xhci_init_driver(&xhci_pci_hc_driver, &xhci_pci_overrides);
#ifdef CONFIG_PM
	xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend;
	xhci_pci_hc_driver.pci_resume = xhci_pci_resume;
#endif
	return pci_register_driver(&xhci_pci_driver);
}
module_init(xhci_pci_init);

static void __exit xhci_pci_exit(void)
{
	pci_unregister_driver(&xhci_pci_driver);
}
module_exit(xhci_pci_exit);

MODULE_DESCRIPTION("xHCI PCI Host Controller Driver");
MODULE_LICENSE("GPL");
Commit	Line	Data
66d4eadd SS	1	/*
	2	* xHCI host controller driver PCI Bus Glue.
	3	*
	4	* Copyright (C) 2008 Intel Corp.
	5	*
	6	* Author: Sarah Sharp
	7	* Some code borrowed from the Linux EHCI driver.
	8	*
	9	* This program is free software; you can redistribute it and/or modify
	10	* it under the terms of the GNU General Public License version 2 as
	11	* published by the Free Software Foundation.
	12	*
	13	* This program is distributed in the hope that it will be useful, but
	14	* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
	15	* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
	16	* for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software Foundation,
	20	* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	21	*/
	22
	23	#include <linux/pci.h>
7fc2a616	24	#include <linux/slab.h>
6eb0de82	25	#include <linux/module.h>
c3c5819a	26	#include <linux/acpi.h>
66d4eadd SS	27
66d4eadd SS	28	#include "xhci.h"
4bdfe4c3	29	#include "xhci-trace.h"
66d4eadd	30
abce329c RM	31	#define PORT2_SSIC_CONFIG_REG2 0x883c
	32	#define PROG_DONE (1 << 30)
	33	#define SSIC_PORT_UNUSED (1 << 31)
	34
ac9d8fe7 SS	35	/* Device for a quirk */
	36	#define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73
	37	#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000
bba18e33	38	#define PCI_DEVICE_ID_FRESCO_LOGIC_FL1400 0x1400
ac9d8fe7	39
c877b3b2	40	#define PCI_VENDOR_ID_ETRON 0x1b6f
170625e9	41	#define PCI_DEVICE_ID_EJ168 0x7023
c877b3b2	42
638298dc TI	43	#define PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI 0x8c31
638298dc TI	44	#define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI 0x9c31
b8cb91e0 MN	45	#define PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI 0x22b5
	46	#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI 0xa12f
	47	#define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI 0x9d2f
638298dc	48
66d4eadd SS	49	static const char hcd_name[] = "xhci_hcd";
66d4eadd SS	50
1885d9a3 AB	51	static struct hc_driver __read_mostly xhci_pci_hc_driver;
1885d9a3 AB	52
cd33a321 RQ	53	static int xhci_pci_setup(struct usb_hcd *hcd);
	54
	55	static const struct xhci_driver_overrides xhci_pci_overrides __initconst = {
cd33a321 RQ	56	.reset = xhci_pci_setup,
	57	};
	58
66d4eadd SS	59	/* called after powerup, by probe or system-pm "wakeup" */
	60	static int xhci_pci_reinit(struct xhci_hcd xhci, struct pci_dev pdev)
	61	{
	62	/*
	63	* TODO: Implement finding debug ports later.
	64	* TODO: see if there are any quirks that need to be added to handle
	65	* new extended capabilities.
	66	*/
	67
	68	/* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
	69	if (!pci_set_mwi(pdev))
	70	xhci_dbg(xhci, "MWI active\n");
	71
	72	xhci_dbg(xhci, "Finished xhci_pci_reinit\n");
	73	return 0;
	74	}
	75
da3c9c4f SAS	76	static void xhci_pci_quirks(struct device dev, struct xhci_hcd xhci)
	77	{
	78	struct pci_dev *pdev = to_pci_dev(dev);
	79
ac9d8fe7 SS	80	/* Look for vendor-specific quirks */
ac9d8fe7 SS	81	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
bba18e33 SS	82	(pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK \|\|
	83	pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_FL1400)) {
	84	if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
	85	pdev->revision == 0x0) {
ac9d8fe7	86	xhci->quirks \|= XHCI_RESET_EP_QUIRK;
4bdfe4c3 XR	87	xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
	88	"QUIRK: Fresco Logic xHC needs configure"
	89	" endpoint cmd after reset endpoint");
f5182b41	90	}
455f5892 ON	91	if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK &&
	92	pdev->revision == 0x4) {
	93	xhci->quirks \|= XHCI_SLOW_SUSPEND;
	94	xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
	95	"QUIRK: Fresco Logic xHC revision %u"
	96	"must be suspended extra slowly",
	97	pdev->revision);
	98	}
7f5c4d63 HG	99	if (pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK)
7f5c4d63 HG	100	xhci->quirks \|= XHCI_BROKEN_STREAMS;
f5182b41 SS	101	/* Fresco Logic confirms: all revisions of this chip do not
	102	* support MSI, even though some of them claim to in their PCI
	103	* capabilities.
	104	*/
	105	xhci->quirks \|= XHCI_BROKEN_MSI;
4bdfe4c3 XR	106	xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
	107	"QUIRK: Fresco Logic revision %u "
	108	"has broken MSI implementation",
f5182b41	109	pdev->revision);
1530bbc6	110	xhci->quirks \|= XHCI_TRUST_TX_LENGTH;
ac9d8fe7	111	}
f5182b41	112
0238634d SS	113	if (pdev->vendor == PCI_VENDOR_ID_NEC)
0238634d SS	114	xhci->quirks \|= XHCI_NEC_HOST;
ac9d8fe7	115
7e393a83 AX	116	if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96)
	117	xhci->quirks \|= XHCI_AMD_0x96_HOST;
	118
c41136b0 AX	119	/* AMD PLL quirk */
	120	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
	121	xhci->quirks \|= XHCI_AMD_PLL_FIX;
2597fe99 HR	122
	123	if (pdev->vendor == PCI_VENDOR_ID_AMD)
	124	xhci->quirks \|= XHCI_TRUST_TX_LENGTH;
	125
e3567d2c SS	126	if (pdev->vendor == PCI_VENDOR_ID_INTEL) {
	127	xhci->quirks \|= XHCI_LPM_SUPPORT;
	128	xhci->quirks \|= XHCI_INTEL_HOST;
227a4fd8	129	xhci->quirks \|= XHCI_AVOID_BEI;
e3567d2c	130	}
ad808333 SS	131	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
ad808333 SS	132	pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
2cf95c18 SS	133	xhci->quirks \|= XHCI_EP_LIMIT_QUIRK;
2cf95c18 SS	134	xhci->limit_active_eps = 64;
86cc558e	135	xhci->quirks \|= XHCI_SW_BW_CHECKING;
e95829f4 SS	136	/*
	137	* PPT desktop boards DH77EB and DH77DF will power back on after
	138	* a few seconds of being shutdown. The fix for this is to
	139	* switch the ports from xHCI to EHCI on shutdown. We can't use
	140	* DMI information to find those particular boards (since each
	141	* vendor will change the board name), so we have to key off all
	142	* PPT chipsets.
	143	*/
	144	xhci->quirks \|= XHCI_SPURIOUS_REBOOT;
ad808333	145	}
0a939993 DT	146	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
0a939993 DT	147	pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) {
c09ec25d	148	xhci->quirks \|= XHCI_SPURIOUS_REBOOT;
fd7cd061	149	xhci->quirks \|= XHCI_SPURIOUS_WAKEUP;
638298dc	150	}
b8cb91e0 MN	151	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
	152	(pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_XHCI \|\|
	153	pdev->device == PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_XHCI \|\|
	154	pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI)) {
	155	xhci->quirks \|= XHCI_PME_STUCK_QUIRK;
	156	}
c877b3b2	157	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
170625e9	158	pdev->device == PCI_DEVICE_ID_EJ168) {
c877b3b2	159	xhci->quirks \|= XHCI_RESET_ON_RESUME;
5cb7df2b	160	xhci->quirks \|= XHCI_TRUST_TX_LENGTH;
8f873c1f	161	xhci->quirks \|= XHCI_BROKEN_STREAMS;
c877b3b2	162	}
1aa9578c	163	if (pdev->vendor == PCI_VENDOR_ID_RENESAS &&
6db249eb	164	pdev->device == 0x0015)
1aa9578c	165	xhci->quirks \|= XHCI_RESET_ON_RESUME;
457a4f61 EF	166	if (pdev->vendor == PCI_VENDOR_ID_VIA)
457a4f61 EF	167	xhci->quirks \|= XHCI_RESET_ON_RESUME;
85f4e45b	168
e21eba05 HG	169	/* See https://bugzilla.kernel.org/show_bug.cgi?id=79511 */
	170	if (pdev->vendor == PCI_VENDOR_ID_VIA &&
	171	pdev->device == 0x3432)
	172	xhci->quirks \|= XHCI_BROKEN_STREAMS;
	173
2391eacb HG	174	if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA &&
	175	pdev->device == 0x1042)
	176	xhci->quirks \|= XHCI_BROKEN_STREAMS;
	177
85f4e45b ON	178	if (xhci->quirks & XHCI_RESET_ON_RESUME)
	179	xhci_dbg_trace(xhci, trace_xhci_dbg_quirks,
	180	"QUIRK: Resetting on resume");
da3c9c4f	181	}
c41136b0	182
c3c5819a MN	183	#ifdef CONFIG_ACPI
	184	static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev)
	185	{
	186	static const u8 intel_dsm_uuid[] = {
	187	0xb7, 0x0c, 0x34, 0xac, 0x01, 0xe9, 0xbf, 0x45,
	188	0xb7, 0xe6, 0x2b, 0x34, 0xec, 0x93, 0x1e, 0x23,
	189	};
84ed9152 MW	190	union acpi_object *obj;
	191
	192	obj = acpi_evaluate_dsm(ACPI_HANDLE(&dev->dev), intel_dsm_uuid, 3, 1,
	193	NULL);
	194	ACPI_FREE(obj);
c3c5819a MN	195	}
c3c5819a MN	196	#else
84ed9152	197	static void xhci_pme_acpi_rtd3_enable(struct pci_dev *dev) { }
c3c5819a MN	198	#endif /* CONFIG_ACPI */
c3c5819a MN	199
da3c9c4f SAS	200	/* called during probe() after chip reset completes */
	201	static int xhci_pci_setup(struct usb_hcd *hcd)
	202	{
	203	struct xhci_hcd *xhci;
	204	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
	205	int retval;
66d4eadd	206
b50107bb MN	207	xhci = hcd_to_xhci(hcd);
	208	if (!xhci->sbrn)
	209	pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
	210
da3c9c4f	211	retval = xhci_gen_setup(hcd, xhci_pci_quirks);
66d4eadd	212	if (retval)
da3c9c4f	213	return retval;
006d5820	214
da3c9c4f SAS	215	if (!usb_hcd_is_primary_hcd(hcd))
da3c9c4f SAS	216	return 0;
66d4eadd	217
66d4eadd SS	218	xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn);
	219
	220	/* Find any debug ports */
b02d0ed6 SS	221	retval = xhci_pci_reinit(xhci, pdev);
	222	if (!retval)
	223	return retval;
	224
b02d0ed6 SS	225	return retval;
	226	}
	227
f6ff0ac8 SS	228	/*
	229	* We need to register our own PCI probe function (instead of the USB core's
	230	* function) in order to create a second roothub under xHCI.
	231	*/
	232	static int xhci_pci_probe(struct pci_dev dev, const struct pci_device_id id)
	233	{
	234	int retval;
	235	struct xhci_hcd *xhci;
	236	struct hc_driver *driver;
	237	struct usb_hcd *hcd;
	238
	239	driver = (struct hc_driver *)id->driver_data;
bcffae77 MN	240
	241	/* Prevent runtime suspending between USB-2 and USB-3 initialization */
	242	pm_runtime_get_noresume(&dev->dev);
	243
f6ff0ac8 SS	244	/* Register the USB 2.0 roothub.
	245	* FIXME: USB core must know to register the USB 2.0 roothub first.
	246	* This is sort of silly, because we could just set the HCD driver flags
	247	* to say USB 2.0, but I'm not sure what the implications would be in
	248	* the other parts of the HCD code.
	249	*/
	250	retval = usb_hcd_pci_probe(dev, id);
	251
	252	if (retval)
bcffae77	253	goto put_runtime_pm;
f6ff0ac8 SS	254
	255	/* USB 2.0 roothub is stored in the PCI device now. */
	256	hcd = dev_get_drvdata(&dev->dev);
	257	xhci = hcd_to_xhci(hcd);
	258	xhci->shared_hcd = usb_create_shared_hcd(driver, &dev->dev,
	259	pci_name(dev), hcd);
	260	if (!xhci->shared_hcd) {
	261	retval = -ENOMEM;
	262	goto dealloc_usb2_hcd;
	263	}
	264
f6ff0ac8	265	retval = usb_add_hcd(xhci->shared_hcd, dev->irq,
b5dd18d8	266	IRQF_SHARED);
f6ff0ac8 SS	267	if (retval)
	268	goto put_usb3_hcd;
	269	/* Roothub already marked as USB 3.0 speed */
3b3db026	270
8f873c1f HG	271	if (!(xhci->quirks & XHCI_BROKEN_STREAMS) &&
8f873c1f HG	272	HCC_MAX_PSA(xhci->hcc_params) >= 4)
14aec589 ON	273	xhci->shared_hcd->can_do_streams = 1;
14aec589 ON	274
c3c5819a MN	275	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
	276	xhci_pme_acpi_rtd3_enable(dev);
	277
bcffae77 MN	278	/* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */
	279	pm_runtime_put_noidle(&dev->dev);
	280
f6ff0ac8 SS	281	return 0;
	282
	283	put_usb3_hcd:
	284	usb_put_hcd(xhci->shared_hcd);
	285	dealloc_usb2_hcd:
	286	usb_hcd_pci_remove(dev);
bcffae77 MN	287	put_runtime_pm:
bcffae77 MN	288	pm_runtime_put_noidle(&dev->dev);
f6ff0ac8 SS	289	return retval;
	290	}
	291
b02d0ed6 SS	292	static void xhci_pci_remove(struct pci_dev *dev)
	293	{
	294	struct xhci_hcd *xhci;
	295
	296	xhci = hcd_to_xhci(pci_get_drvdata(dev));
f6ff0ac8 SS	297	if (xhci->shared_hcd) {
	298	usb_remove_hcd(xhci->shared_hcd);
	299	usb_put_hcd(xhci->shared_hcd);
	300	}
b02d0ed6	301	usb_hcd_pci_remove(dev);
638298dc TI	302
	303	/* Workaround for spurious wakeups at shutdown with HSW */
	304	if (xhci->quirks & XHCI_SPURIOUS_WAKEUP)
	305	pci_set_power_state(dev, PCI_D3hot);
66d4eadd SS	306	}
66d4eadd SS	307
5535b1d5	308	#ifdef CONFIG_PM
2b7627b7 TB	309	/*
	310	* In some Intel xHCI controllers, in order to get D3 working,
	311	* through a vendor specific SSIC CONFIG register at offset 0x883c,
	312	* SSIC PORT need to be marked as "unused" before putting xHCI
	313	* into D3. After D3 exit, the SSIC port need to be marked as "used".
	314	* Without this change, xHCI might not enter D3 state.
	315	* Make sure PME works on some Intel xHCI controllers by writing 1 to clear
	316	* the Internal PME flag bit in vendor specific PMCTRL register at offset 0x80a4
	317	*/
	318	static void xhci_pme_quirk(struct usb_hcd *hcd, bool suspend)
	319	{
	320	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
	321	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
	322	u32 val;
	323	void __iomem *reg;
	324
	325	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
	326	pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI) {
	327
	328	reg = (void __iomem *) xhci->cap_regs + PORT2_SSIC_CONFIG_REG2;
	329
	330	/* Notify SSIC that SSIC profile programming is not done */
	331	val = readl(reg) & ~PROG_DONE;
	332	writel(val, reg);
	333
	334	/* Mark SSIC port as unused(suspend) or used(resume) */
	335	val = readl(reg);
	336	if (suspend)
	337	val \|= SSIC_PORT_UNUSED;
	338	else
	339	val &= ~SSIC_PORT_UNUSED;
	340	writel(val, reg);
	341
	342	/* Notify SSIC that SSIC profile programming is done */
	343	val = readl(reg) \| PROG_DONE;
	344	writel(val, reg);
	345	readl(reg);
	346	}
	347
	348	reg = (void __iomem *) xhci->cap_regs + 0x80a4;
	349	val = readl(reg);
	350	writel(val \| BIT(28), reg);
	351	readl(reg);
	352	}
	353
5535b1d5 AX	354	static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
	355	{
	356	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
c3897aa5 SS	357	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
	358
	359	/*
	360	* Systems with the TI redriver that loses port status change events
	361	* need to have the registers polled during D3, so avoid D3cold.
	362	*/
e1cd9727	363	if (xhci->quirks & XHCI_COMP_MODE_QUIRK)
c3897aa5	364	pdev->no_d3cold = true;
5535b1d5	365
b8cb91e0	366	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
abce329c	367	xhci_pme_quirk(hcd, true);
b8cb91e0	368
a1377e53	369	return xhci_suspend(xhci, do_wakeup);
5535b1d5 AX	370	}
	371
	372	static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
	373	{
	374	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
69e848c2	375	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
5535b1d5 AX	376	int retval = 0;
5535b1d5 AX	377
69e848c2 SS	378	/* The BIOS on systems with the Intel Panther Point chipset may or may
	379	* not support xHCI natively. That means that during system resume, it
	380	* may switch the ports back to EHCI so that users can use their
	381	* keyboard to select a kernel from GRUB after resume from hibernate.
	382	*
	383	* The BIOS is supposed to remember whether the OS had xHCI ports
	384	* enabled before resume, and switch the ports back to xHCI when the
	385	* BIOS/OS semaphore is written, but we all know we can't trust BIOS
	386	* writers.
	387	*
	388	* Unconditionally switch the ports back to xHCI after a system resume.
26b76798 MN	389	* It should not matter whether the EHCI or xHCI controller is
	390	* resumed first. It's enough to do the switchover in xHCI because
	391	* USB core won't notice anything as the hub driver doesn't start
	392	* running again until after all the devices (including both EHCI and
	393	* xHCI host controllers) have been resumed.
69e848c2	394	*/
26b76798 MN	395
	396	if (pdev->vendor == PCI_VENDOR_ID_INTEL)
	397	usb_enable_intel_xhci_ports(pdev);
69e848c2	398
b8cb91e0	399	if (xhci->quirks & XHCI_PME_STUCK_QUIRK)
abce329c	400	xhci_pme_quirk(hcd, false);
b8cb91e0	401
5535b1d5 AX	402	retval = xhci_resume(xhci, hibernated);
	403	return retval;
	404	}
	405	#endif /* CONFIG_PM */
	406
66d4eadd SS	407	/-------------------------------------------------------------------------/
	408
	409	/* PCI driver selection metadata; PCI hotplugging uses this */
	410	static const struct pci_device_id pci_ids[] = { {
	411	/* handle any USB 3.0 xHCI controller */
	412	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0),
	413	.driver_data = (unsigned long) &xhci_pci_hc_driver,
	414	},
	415	{ /* end: all zeroes */ }
	416	};
	417	MODULE_DEVICE_TABLE(pci, pci_ids);
	418
	419	/* pci driver glue; this is a "new style" PCI driver module */
	420	static struct pci_driver xhci_pci_driver = {
	421	.name = (char *) hcd_name,
	422	.id_table = pci_ids,
	423
f6ff0ac8	424	.probe = xhci_pci_probe,
b02d0ed6	425	.remove = xhci_pci_remove,
66d4eadd SS	426	/* suspend and resume implemented later */
	427
	428	.shutdown = usb_hcd_pci_shutdown,
f875fdbf	429	#ifdef CONFIG_PM
5535b1d5 AX	430	.driver = {
	431	.pm = &usb_hcd_pci_pm_ops
	432	},
	433	#endif
66d4eadd SS	434	};
66d4eadd SS	435
29e409f0	436	static int __init xhci_pci_init(void)
66d4eadd	437	{
cd33a321	438	xhci_init_driver(&xhci_pci_hc_driver, &xhci_pci_overrides);
1885d9a3 AB	439	#ifdef CONFIG_PM
	440	xhci_pci_hc_driver.pci_suspend = xhci_pci_suspend;
	441	xhci_pci_hc_driver.pci_resume = xhci_pci_resume;
	442	#endif
66d4eadd SS	443	return pci_register_driver(&xhci_pci_driver);
66d4eadd SS	444	}
29e409f0	445	module_init(xhci_pci_init);
66d4eadd	446
29e409f0	447	static void __exit xhci_pci_exit(void)
66d4eadd SS	448	{
	449	pci_unregister_driver(&xhci_pci_driver);
	450	}
29e409f0 AB	451	module_exit(xhci_pci_exit);
	452
	453	MODULE_DESCRIPTION("xHCI PCI Host Controller Driver");
	454	MODULE_LICENSE("GPL");