[linux-2.6-block.git] / drivers / usb / host / xhci-pci.c

/*
 * xHCI host controller driver PCI Bus Glue.
 *
 * Copyright (C) 2008 Intel Corp.
 *
 * Author: Sarah Sharp
 * Some code borrowed from the Linux EHCI driver.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
 * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software Foundation,
 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/pci.h>
#include <linux/slab.h>
#include <linux/module.h>

#include "xhci.h"

/* Device for a quirk */
#define PCI_VENDOR_ID_FRESCO_LOGIC	0x1b73
#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK	0x1000

#define PCI_VENDOR_ID_ETRON		0x1b6f
#define PCI_DEVICE_ID_ASROCK_P67	0x7023

static const char hcd_name[] = "xhci_hcd";

/* called after powerup, by probe or system-pm "wakeup" */
static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)
{
	/*
	 * TODO: Implement finding debug ports later.
	 * TODO: see if there are any quirks that need to be added to handle
	 * new extended capabilities.
	 */

	/* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
	if (!pci_set_mwi(pdev))
		xhci_dbg(xhci, "MWI active\n");

	xhci_dbg(xhci, "Finished xhci_pci_reinit\n");
	return 0;
}

static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
{
	struct pci_dev		*pdev = to_pci_dev(dev);

	/* Look for vendor-specific quirks */
	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
			pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) {
		if (pdev->revision == 0x0) {
			xhci->quirks |= XHCI_RESET_EP_QUIRK;
			xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
					" endpoint cmd after reset endpoint\n");
		}
		/* Fresco Logic confirms: all revisions of this chip do not
		 * support MSI, even though some of them claim to in their PCI
		 * capabilities.
		 */
		xhci->quirks |= XHCI_BROKEN_MSI;
		xhci_dbg(xhci, "QUIRK: Fresco Logic revision %u "
				"has broken MSI implementation\n",
				pdev->revision);
		xhci->quirks |= XHCI_TRUST_TX_LENGTH;
	}

	if (pdev->vendor == PCI_VENDOR_ID_NEC)
		xhci->quirks |= XHCI_NEC_HOST;

	if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96)
		xhci->quirks |= XHCI_AMD_0x96_HOST;

	/* AMD PLL quirk */
	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
		xhci->quirks |= XHCI_AMD_PLL_FIX;
	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
			pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
		xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
		xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
		xhci->limit_active_eps = 64;
		xhci->quirks |= XHCI_SW_BW_CHECKING;
	}
	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
			pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
		xhci->quirks |= XHCI_RESET_ON_RESUME;
		xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
	}
	if (pdev->vendor == PCI_VENDOR_ID_VIA)
		xhci->quirks |= XHCI_RESET_ON_RESUME;
}

/* called during probe() after chip reset completes */
static int xhci_pci_setup(struct usb_hcd *hcd)
{
	struct xhci_hcd		*xhci;
	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
	int			retval;

	retval = xhci_gen_setup(hcd, xhci_pci_quirks);
	if (retval)
		return retval;

	xhci = hcd_to_xhci(hcd);
	if (!usb_hcd_is_primary_hcd(hcd))
		return 0;

	pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
	xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn);

	/* Find any debug ports */
	retval = xhci_pci_reinit(xhci, pdev);
	if (!retval)
		return retval;

	kfree(xhci);
	return retval;
}

/*
 * We need to register our own PCI probe function (instead of the USB core's
 * function) in order to create a second roothub under xHCI.
 */
static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
	int retval;
	struct xhci_hcd *xhci;
	struct hc_driver *driver;
	struct usb_hcd *hcd;

	driver = (struct hc_driver *)id->driver_data;
	/* Register the USB 2.0 roothub.
	 * FIXME: USB core must know to register the USB 2.0 roothub first.
	 * This is sort of silly, because we could just set the HCD driver flags
	 * to say USB 2.0, but I'm not sure what the implications would be in
	 * the other parts of the HCD code.
	 */
	retval = usb_hcd_pci_probe(dev, id);

	if (retval)
		return retval;

	/* USB 2.0 roothub is stored in the PCI device now. */
	hcd = dev_get_drvdata(&dev->dev);
	xhci = hcd_to_xhci(hcd);
	xhci->shared_hcd = usb_create_shared_hcd(driver, &dev->dev,
				pci_name(dev), hcd);
	if (!xhci->shared_hcd) {
		retval = -ENOMEM;
		goto dealloc_usb2_hcd;
	}

	/* Set the xHCI pointer before xhci_pci_setup() (aka hcd_driver.reset)
	 * is called by usb_add_hcd().
	 */
	*((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci;

	retval = usb_add_hcd(xhci->shared_hcd, dev->irq,
			IRQF_SHARED);
	if (retval)
		goto put_usb3_hcd;
	/* Roothub already marked as USB 3.0 speed */
	return 0;

put_usb3_hcd:
	usb_put_hcd(xhci->shared_hcd);
dealloc_usb2_hcd:
	usb_hcd_pci_remove(dev);
	return retval;
}

static void xhci_pci_remove(struct pci_dev *dev)
{
	struct xhci_hcd *xhci;

	xhci = hcd_to_xhci(pci_get_drvdata(dev));
	if (xhci->shared_hcd) {
		usb_remove_hcd(xhci->shared_hcd);
		usb_put_hcd(xhci->shared_hcd);
	}
	usb_hcd_pci_remove(dev);
	kfree(xhci);
}

#ifdef CONFIG_PM
static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
{
	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
	int	retval = 0;

	if (hcd->state != HC_STATE_SUSPENDED ||
			xhci->shared_hcd->state != HC_STATE_SUSPENDED)
		return -EINVAL;

	retval = xhci_suspend(xhci);

	return retval;
}

static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
{
	struct xhci_hcd		*xhci = hcd_to_xhci(hcd);
	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
	int			retval = 0;

	/* The BIOS on systems with the Intel Panther Point chipset may or may
	 * not support xHCI natively.  That means that during system resume, it
	 * may switch the ports back to EHCI so that users can use their
	 * keyboard to select a kernel from GRUB after resume from hibernate.
	 *
	 * The BIOS is supposed to remember whether the OS had xHCI ports
	 * enabled before resume, and switch the ports back to xHCI when the
	 * BIOS/OS semaphore is written, but we all know we can't trust BIOS
	 * writers.
	 *
	 * Unconditionally switch the ports back to xHCI after a system resume.
	 * We can't tell whether the EHCI or xHCI controller will be resumed
	 * first, so we have to do the port switchover in both drivers.  Writing
	 * a '1' to the port switchover registers should have no effect if the
	 * port was already switched over.
	 */
	if (usb_is_intel_switchable_xhci(pdev))
		usb_enable_xhci_ports(pdev);

	retval = xhci_resume(xhci, hibernated);
	return retval;
}
#endif /* CONFIG_PM */

static const struct hc_driver xhci_pci_hc_driver = {
	.description =		hcd_name,
	.product_desc =		"xHCI Host Controller",
	.hcd_priv_size =	sizeof(struct xhci_hcd *),

	/*
	 * generic hardware linkage
	 */
	.irq =			xhci_irq,
	.flags =		HCD_MEMORY | HCD_USB3 | HCD_SHARED,

	/*
	 * basic lifecycle operations
	 */
	.reset =		xhci_pci_setup,
	.start =		xhci_run,
#ifdef CONFIG_PM
	.pci_suspend =          xhci_pci_suspend,
	.pci_resume =           xhci_pci_resume,
#endif
	.stop =			xhci_stop,
	.shutdown =		xhci_shutdown,

	/*
	 * managing i/o requests and associated device resources
	 */
	.urb_enqueue =		xhci_urb_enqueue,
	.urb_dequeue =		xhci_urb_dequeue,
	.alloc_dev =		xhci_alloc_dev,
	.free_dev =		xhci_free_dev,
	.alloc_streams =	xhci_alloc_streams,
	.free_streams =		xhci_free_streams,
	.add_endpoint =		xhci_add_endpoint,
	.drop_endpoint =	xhci_drop_endpoint,
	.endpoint_reset =	xhci_endpoint_reset,
	.check_bandwidth =	xhci_check_bandwidth,
	.reset_bandwidth =	xhci_reset_bandwidth,
	.address_device =	xhci_address_device,
	.update_hub_device =	xhci_update_hub_device,
	.reset_device =		xhci_discover_or_reset_device,

	/*
	 * scheduling support
	 */
	.get_frame_number =	xhci_get_frame,

	/* Root hub support */
	.hub_control =		xhci_hub_control,
	.hub_status_data =	xhci_hub_status_data,
	.bus_suspend =		xhci_bus_suspend,
	.bus_resume =		xhci_bus_resume,
	/*
	 * call back when device connected and addressed
	 */
	.update_device =        xhci_update_device,
	.set_usb2_hw_lpm =	xhci_set_usb2_hardware_lpm,
};

/*-------------------------------------------------------------------------*/

/* PCI driver selection metadata; PCI hotplugging uses this */
static const struct pci_device_id pci_ids[] = { {
	/* handle any USB 3.0 xHCI controller */
	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0),
	.driver_data =	(unsigned long) &xhci_pci_hc_driver,
	},
	{ /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE(pci, pci_ids);

/* pci driver glue; this is a "new style" PCI driver module */
static struct pci_driver xhci_pci_driver = {
	.name =		(char *) hcd_name,
	.id_table =	pci_ids,

	.probe =	xhci_pci_probe,
	.remove =	xhci_pci_remove,
	/* suspend and resume implemented later */

	.shutdown = 	usb_hcd_pci_shutdown,
#ifdef CONFIG_PM_SLEEP
	.driver = {
		.pm = &usb_hcd_pci_pm_ops
	},
#endif
};

int __init xhci_register_pci(void)
{
	return pci_register_driver(&xhci_pci_driver);
}

void xhci_unregister_pci(void)
{
	pci_unregister_driver(&xhci_pci_driver);
}
Commit	Line	Data
66d4eadd SS	1	/*
	2	* xHCI host controller driver PCI Bus Glue.
	3	*
	4	* Copyright (C) 2008 Intel Corp.
	5	*
	6	* Author: Sarah Sharp
	7	* Some code borrowed from the Linux EHCI driver.
	8	*
	9	* This program is free software; you can redistribute it and/or modify
	10	* it under the terms of the GNU General Public License version 2 as
	11	* published by the Free Software Foundation.
	12	*
	13	* This program is distributed in the hope that it will be useful, but
	14	* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
	15	* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
	16	* for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software Foundation,
	20	* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	21	*/
	22
	23	#include <linux/pci.h>
7fc2a616	24	#include <linux/slab.h>
6eb0de82	25	#include <linux/module.h>
66d4eadd SS	26
	27	#include "xhci.h"
	28
ac9d8fe7 SS	29	/* Device for a quirk */
	30	#define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73
	31	#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000
	32
c877b3b2 ML	33	#define PCI_VENDOR_ID_ETRON 0x1b6f
	34	#define PCI_DEVICE_ID_ASROCK_P67 0x7023
	35
66d4eadd SS	36	static const char hcd_name[] = "xhci_hcd";
	37
	38	/* called after powerup, by probe or system-pm "wakeup" */
	39	static int xhci_pci_reinit(struct xhci_hcd xhci, struct pci_dev pdev)
	40	{
	41	/*
	42	* TODO: Implement finding debug ports later.
	43	* TODO: see if there are any quirks that need to be added to handle
	44	* new extended capabilities.
	45	*/
	46
	47	/* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
	48	if (!pci_set_mwi(pdev))
	49	xhci_dbg(xhci, "MWI active\n");
	50
	51	xhci_dbg(xhci, "Finished xhci_pci_reinit\n");
	52	return 0;
	53	}
	54
da3c9c4f SAS	55	static void xhci_pci_quirks(struct device dev, struct xhci_hcd xhci)
	56	{
	57	struct pci_dev *pdev = to_pci_dev(dev);
	58
ac9d8fe7 SS	59	/* Look for vendor-specific quirks */
ac9d8fe7 SS	60	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
f5182b41 SS	61	pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) {
f5182b41 SS	62	if (pdev->revision == 0x0) {
ac9d8fe7 SS	63	xhci->quirks \|= XHCI_RESET_EP_QUIRK;
	64	xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
	65	" endpoint cmd after reset endpoint\n");
f5182b41 SS	66	}
	67	/* Fresco Logic confirms: all revisions of this chip do not
	68	* support MSI, even though some of them claim to in their PCI
	69	* capabilities.
	70	*/
	71	xhci->quirks \|= XHCI_BROKEN_MSI;
	72	xhci_dbg(xhci, "QUIRK: Fresco Logic revision %u "
	73	"has broken MSI implementation\n",
	74	pdev->revision);
1530bbc6	75	xhci->quirks \|= XHCI_TRUST_TX_LENGTH;
ac9d8fe7	76	}
f5182b41	77
0238634d SS	78	if (pdev->vendor == PCI_VENDOR_ID_NEC)
0238634d SS	79	xhci->quirks \|= XHCI_NEC_HOST;
ac9d8fe7	80
7e393a83 AX	81	if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96)
	82	xhci->quirks \|= XHCI_AMD_0x96_HOST;
	83
c41136b0 AX	84	/* AMD PLL quirk */
	85	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
	86	xhci->quirks \|= XHCI_AMD_PLL_FIX;
ad808333 SS	87	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
	88	pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
	89	xhci->quirks \|= XHCI_SPURIOUS_SUCCESS;
2cf95c18 SS	90	xhci->quirks \|= XHCI_EP_LIMIT_QUIRK;
2cf95c18 SS	91	xhci->limit_active_eps = 64;
86cc558e	92	xhci->quirks \|= XHCI_SW_BW_CHECKING;
ad808333	93	}
c877b3b2 ML	94	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
	95	pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
	96	xhci->quirks \|= XHCI_RESET_ON_RESUME;
	97	xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
	98	}
457a4f61 EF	99	if (pdev->vendor == PCI_VENDOR_ID_VIA)
457a4f61 EF	100	xhci->quirks \|= XHCI_RESET_ON_RESUME;
da3c9c4f	101	}
c41136b0	102
da3c9c4f SAS	103	/* called during probe() after chip reset completes */
	104	static int xhci_pci_setup(struct usb_hcd *hcd)
	105	{
	106	struct xhci_hcd *xhci;
	107	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
	108	int retval;
66d4eadd	109
da3c9c4f	110	retval = xhci_gen_setup(hcd, xhci_pci_quirks);
66d4eadd	111	if (retval)
da3c9c4f	112	return retval;
006d5820	113
da3c9c4f SAS	114	xhci = hcd_to_xhci(hcd);
	115	if (!usb_hcd_is_primary_hcd(hcd))
	116	return 0;
66d4eadd SS	117
	118	pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
	119	xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn);
	120
	121	/* Find any debug ports */
b02d0ed6 SS	122	retval = xhci_pci_reinit(xhci, pdev);
	123	if (!retval)
	124	return retval;
	125
b02d0ed6 SS	126	kfree(xhci);
	127	return retval;
	128	}
	129
f6ff0ac8 SS	130	/*
	131	* We need to register our own PCI probe function (instead of the USB core's
	132	* function) in order to create a second roothub under xHCI.
	133	*/
	134	static int xhci_pci_probe(struct pci_dev dev, const struct pci_device_id id)
	135	{
	136	int retval;
	137	struct xhci_hcd *xhci;
	138	struct hc_driver *driver;
	139	struct usb_hcd *hcd;
	140
	141	driver = (struct hc_driver *)id->driver_data;
	142	/* Register the USB 2.0 roothub.
	143	* FIXME: USB core must know to register the USB 2.0 roothub first.
	144	* This is sort of silly, because we could just set the HCD driver flags
	145	* to say USB 2.0, but I'm not sure what the implications would be in
	146	* the other parts of the HCD code.
	147	*/
	148	retval = usb_hcd_pci_probe(dev, id);
	149
	150	if (retval)
	151	return retval;
	152
	153	/* USB 2.0 roothub is stored in the PCI device now. */
	154	hcd = dev_get_drvdata(&dev->dev);
	155	xhci = hcd_to_xhci(hcd);
	156	xhci->shared_hcd = usb_create_shared_hcd(driver, &dev->dev,
	157	pci_name(dev), hcd);
	158	if (!xhci->shared_hcd) {
	159	retval = -ENOMEM;
	160	goto dealloc_usb2_hcd;
	161	}
	162
	163	/* Set the xHCI pointer before xhci_pci_setup() (aka hcd_driver.reset)
	164	* is called by usb_add_hcd().
	165	*/
	166	((struct xhci_hcd *) xhci->shared_hcd->hcd_priv) = xhci;
	167
	168	retval = usb_add_hcd(xhci->shared_hcd, dev->irq,
b5dd18d8	169	IRQF_SHARED);
f6ff0ac8 SS	170	if (retval)
	171	goto put_usb3_hcd;
	172	/* Roothub already marked as USB 3.0 speed */
	173	return 0;
	174
	175	put_usb3_hcd:
	176	usb_put_hcd(xhci->shared_hcd);
	177	dealloc_usb2_hcd:
	178	usb_hcd_pci_remove(dev);
	179	return retval;
	180	}
	181
b02d0ed6 SS	182	static void xhci_pci_remove(struct pci_dev *dev)
	183	{
	184	struct xhci_hcd *xhci;
	185
	186	xhci = hcd_to_xhci(pci_get_drvdata(dev));
f6ff0ac8 SS	187	if (xhci->shared_hcd) {
	188	usb_remove_hcd(xhci->shared_hcd);
	189	usb_put_hcd(xhci->shared_hcd);
	190	}
b02d0ed6 SS	191	usb_hcd_pci_remove(dev);
b02d0ed6 SS	192	kfree(xhci);
66d4eadd SS	193	}
66d4eadd SS	194
5535b1d5 AX	195	#ifdef CONFIG_PM
	196	static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
	197	{
	198	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
	199	int retval = 0;
	200
b3209379 SS	201	if (hcd->state != HC_STATE_SUSPENDED \|\|
b3209379 SS	202	xhci->shared_hcd->state != HC_STATE_SUSPENDED)
5535b1d5 AX	203	return -EINVAL;
	204
	205	retval = xhci_suspend(xhci);
	206
	207	return retval;
	208	}
	209
	210	static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
	211	{
	212	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
69e848c2	213	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
5535b1d5 AX	214	int retval = 0;
5535b1d5 AX	215
69e848c2 SS	216	/* The BIOS on systems with the Intel Panther Point chipset may or may
	217	* not support xHCI natively. That means that during system resume, it
	218	* may switch the ports back to EHCI so that users can use their
	219	* keyboard to select a kernel from GRUB after resume from hibernate.
	220	*
	221	* The BIOS is supposed to remember whether the OS had xHCI ports
	222	* enabled before resume, and switch the ports back to xHCI when the
	223	* BIOS/OS semaphore is written, but we all know we can't trust BIOS
	224	* writers.
	225	*
	226	* Unconditionally switch the ports back to xHCI after a system resume.
	227	* We can't tell whether the EHCI or xHCI controller will be resumed
	228	* first, so we have to do the port switchover in both drivers. Writing
	229	* a '1' to the port switchover registers should have no effect if the
	230	* port was already switched over.
	231	*/
	232	if (usb_is_intel_switchable_xhci(pdev))
	233	usb_enable_xhci_ports(pdev);
	234
5535b1d5 AX	235	retval = xhci_resume(xhci, hibernated);
	236	return retval;
	237	}
	238	#endif /* CONFIG_PM */
	239
66d4eadd SS	240	static const struct hc_driver xhci_pci_hc_driver = {
	241	.description = hcd_name,
	242	.product_desc = "xHCI Host Controller",
b02d0ed6	243	.hcd_priv_size = sizeof(struct xhci_hcd *),
66d4eadd SS	244
	245	/*
	246	* generic hardware linkage
	247	*/
7f84eef0	248	.irq = xhci_irq,
f6ff0ac8	249	.flags = HCD_MEMORY \| HCD_USB3 \| HCD_SHARED,
66d4eadd SS	250
	251	/*
	252	* basic lifecycle operations
	253	*/
	254	.reset = xhci_pci_setup,
	255	.start = xhci_run,
5535b1d5 AX	256	#ifdef CONFIG_PM
	257	.pci_suspend = xhci_pci_suspend,
	258	.pci_resume = xhci_pci_resume,
	259	#endif
66d4eadd SS	260	.stop = xhci_stop,
	261	.shutdown = xhci_shutdown,
	262
3ffbba95 SS	263	/*
	264	* managing i/o requests and associated device resources
	265	*/
d0e96f5a SS	266	.urb_enqueue = xhci_urb_enqueue,
d0e96f5a SS	267	.urb_dequeue = xhci_urb_dequeue,
3ffbba95 SS	268	.alloc_dev = xhci_alloc_dev,
3ffbba95 SS	269	.free_dev = xhci_free_dev,
eab1cafc SS	270	.alloc_streams = xhci_alloc_streams,
eab1cafc SS	271	.free_streams = xhci_free_streams,
f94e0186 SS	272	.add_endpoint = xhci_add_endpoint,
f94e0186 SS	273	.drop_endpoint = xhci_drop_endpoint,
a1587d97	274	.endpoint_reset = xhci_endpoint_reset,
f94e0186 SS	275	.check_bandwidth = xhci_check_bandwidth,
f94e0186 SS	276	.reset_bandwidth = xhci_reset_bandwidth,
3ffbba95	277	.address_device = xhci_address_device,
b356b7c7	278	.update_hub_device = xhci_update_hub_device,
f0615c45	279	.reset_device = xhci_discover_or_reset_device,
3ffbba95	280
66d4eadd SS	281	/*
	282	* scheduling support
	283	*/
	284	.get_frame_number = xhci_get_frame,
	285
0f2a7930 SS	286	/* Root hub support */
	287	.hub_control = xhci_hub_control,
	288	.hub_status_data = xhci_hub_status_data,
9777e3ce AX	289	.bus_suspend = xhci_bus_suspend,
9777e3ce AX	290	.bus_resume = xhci_bus_resume,
9574323c AX	291	/*
	292	* call back when device connected and addressed
	293	*/
	294	.update_device = xhci_update_device,
65580b43	295	.set_usb2_hw_lpm = xhci_set_usb2_hardware_lpm,
66d4eadd SS	296	};
	297
	298	/-------------------------------------------------------------------------/
	299
	300	/* PCI driver selection metadata; PCI hotplugging uses this */
	301	static const struct pci_device_id pci_ids[] = { {
	302	/* handle any USB 3.0 xHCI controller */
	303	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0),
	304	.driver_data = (unsigned long) &xhci_pci_hc_driver,
	305	},
	306	{ /* end: all zeroes */ }
	307	};
	308	MODULE_DEVICE_TABLE(pci, pci_ids);
	309
	310	/* pci driver glue; this is a "new style" PCI driver module */
	311	static struct pci_driver xhci_pci_driver = {
	312	.name = (char *) hcd_name,
	313	.id_table = pci_ids,
	314
f6ff0ac8	315	.probe = xhci_pci_probe,
b02d0ed6	316	.remove = xhci_pci_remove,
66d4eadd SS	317	/* suspend and resume implemented later */
	318
	319	.shutdown = usb_hcd_pci_shutdown,
5535b1d5 AX	320	#ifdef CONFIG_PM_SLEEP
	321	.driver = {
	322	.pm = &usb_hcd_pci_pm_ops
	323	},
	324	#endif
66d4eadd SS	325	};
66d4eadd SS	326
0cc47d54	327	int __init xhci_register_pci(void)
66d4eadd SS	328	{
	329	return pci_register_driver(&xhci_pci_driver);
	330	}
	331
a46c46a1	332	void xhci_unregister_pci(void)
66d4eadd SS	333	{
	334	pci_unregister_driver(&xhci_pci_driver);
	335	}