[linux-2.6-block.git] / drivers / usb / host / xhci-pci.c

/*
 * xHCI host controller driver PCI Bus Glue.
 *
 * Copyright (C) 2008 Intel Corp.
 *
 * Author: Sarah Sharp
 * Some code borrowed from the Linux EHCI driver.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License version 2 as
 * published by the Free Software Foundation.
 *
 * This program is distributed in the hope that it will be useful, but
 * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
 * or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
 * for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software Foundation,
 * Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#include <linux/pci.h>
#include <linux/slab.h>

#include "xhci.h"

/* Device for a quirk */
#define PCI_VENDOR_ID_FRESCO_LOGIC	0x1b73
#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK	0x1000

#define PCI_VENDOR_ID_ETRON		0x1b6f
#define PCI_DEVICE_ID_ASROCK_P67	0x7023

static const char hcd_name[] = "xhci_hcd";

/* called after powerup, by probe or system-pm "wakeup" */
static int xhci_pci_reinit(struct xhci_hcd *xhci, struct pci_dev *pdev)
{
	/*
	 * TODO: Implement finding debug ports later.
	 * TODO: see if there are any quirks that need to be added to handle
	 * new extended capabilities.
	 */

	/* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
	if (!pci_set_mwi(pdev))
		xhci_dbg(xhci, "MWI active\n");

	xhci_dbg(xhci, "Finished xhci_pci_reinit\n");
	return 0;
}

/* called during probe() after chip reset completes */
static int xhci_pci_setup(struct usb_hcd *hcd)
{
	struct xhci_hcd		*xhci;
	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
	int			retval;
	u32			temp;

	hcd->self.sg_tablesize = TRBS_PER_SEGMENT - 2;

	if (usb_hcd_is_primary_hcd(hcd)) {
		xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
		if (!xhci)
			return -ENOMEM;
		*((struct xhci_hcd **) hcd->hcd_priv) = xhci;
		xhci->main_hcd = hcd;
		/* Mark the first roothub as being USB 2.0.
		 * The xHCI driver will register the USB 3.0 roothub.
		 */
		hcd->speed = HCD_USB2;
		hcd->self.root_hub->speed = USB_SPEED_HIGH;
		/*
		 * USB 2.0 roothub under xHCI has an integrated TT,
		 * (rate matching hub) as opposed to having an OHCI/UHCI
		 * companion controller.
		 */
		hcd->has_tt = 1;
	} else {
		/* xHCI private pointer was set in xhci_pci_probe for the second
		 * registered roothub.
		 */
		xhci = hcd_to_xhci(hcd);
		temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
		if (HCC_64BIT_ADDR(temp)) {
			xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
			dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64));
		} else {
			dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32));
		}
		return 0;
	}

	xhci->cap_regs = hcd->regs;
	xhci->op_regs = hcd->regs +
		HC_LENGTH(xhci_readl(xhci, &xhci->cap_regs->hc_capbase));
	xhci->run_regs = hcd->regs +
		(xhci_readl(xhci, &xhci->cap_regs->run_regs_off) & RTSOFF_MASK);
	/* Cache read-only capability registers */
	xhci->hcs_params1 = xhci_readl(xhci, &xhci->cap_regs->hcs_params1);
	xhci->hcs_params2 = xhci_readl(xhci, &xhci->cap_regs->hcs_params2);
	xhci->hcs_params3 = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
	xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
	xhci->hci_version = HC_VERSION(xhci->hcc_params);
	xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
	xhci_print_registers(xhci);

	/* Look for vendor-specific quirks */
	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
			pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) {
		if (pdev->revision == 0x0) {
			xhci->quirks |= XHCI_RESET_EP_QUIRK;
			xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
					" endpoint cmd after reset endpoint\n");
		}
		/* Fresco Logic confirms: all revisions of this chip do not
		 * support MSI, even though some of them claim to in their PCI
		 * capabilities.
		 */
		xhci->quirks |= XHCI_BROKEN_MSI;
		xhci_dbg(xhci, "QUIRK: Fresco Logic revision %u "
				"has broken MSI implementation\n",
				pdev->revision);
	}

	if (pdev->vendor == PCI_VENDOR_ID_NEC)
		xhci->quirks |= XHCI_NEC_HOST;

	if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96)
		xhci->quirks |= XHCI_AMD_0x96_HOST;

	/* AMD PLL quirk */
	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
		xhci->quirks |= XHCI_AMD_PLL_FIX;
	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
			pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
		xhci->quirks |= XHCI_SPURIOUS_SUCCESS;
		xhci->quirks |= XHCI_EP_LIMIT_QUIRK;
		xhci->limit_active_eps = 64;
		xhci->quirks |= XHCI_SW_BW_CHECKING;
	}
	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
			pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
		xhci->quirks |= XHCI_RESET_ON_RESUME;
		xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
	}

	/* Make sure the HC is halted. */
	retval = xhci_halt(xhci);
	if (retval)
		goto error;

	xhci_dbg(xhci, "Resetting HCD\n");
	/* Reset the internal HC memory state and registers. */
	retval = xhci_reset(xhci);
	if (retval)
		goto error;
	xhci_dbg(xhci, "Reset complete\n");

	temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
	if (HCC_64BIT_ADDR(temp)) {
		xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
		dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64));
	} else {
		dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32));
	}

	xhci_dbg(xhci, "Calling HCD init\n");
	/* Initialize HCD and host controller data structures. */
	retval = xhci_init(hcd);
	if (retval)
		goto error;
	xhci_dbg(xhci, "Called HCD init\n");

	pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
	xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn);

	/* Find any debug ports */
	retval = xhci_pci_reinit(xhci, pdev);
	if (!retval)
		return retval;

error:
	kfree(xhci);
	return retval;
}

/*
 * We need to register our own PCI probe function (instead of the USB core's
 * function) in order to create a second roothub under xHCI.
 */
static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
	int retval;
	struct xhci_hcd *xhci;
	struct hc_driver *driver;
	struct usb_hcd *hcd;

	driver = (struct hc_driver *)id->driver_data;
	/* Register the USB 2.0 roothub.
	 * FIXME: USB core must know to register the USB 2.0 roothub first.
	 * This is sort of silly, because we could just set the HCD driver flags
	 * to say USB 2.0, but I'm not sure what the implications would be in
	 * the other parts of the HCD code.
	 */
	retval = usb_hcd_pci_probe(dev, id);

	if (retval)
		return retval;

	/* USB 2.0 roothub is stored in the PCI device now. */
	hcd = dev_get_drvdata(&dev->dev);
	xhci = hcd_to_xhci(hcd);
	xhci->shared_hcd = usb_create_shared_hcd(driver, &dev->dev,
				pci_name(dev), hcd);
	if (!xhci->shared_hcd) {
		retval = -ENOMEM;
		goto dealloc_usb2_hcd;
	}

	/* Set the xHCI pointer before xhci_pci_setup() (aka hcd_driver.reset)
	 * is called by usb_add_hcd().
	 */
	*((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci;

	retval = usb_add_hcd(xhci->shared_hcd, dev->irq,
			IRQF_SHARED);
	if (retval)
		goto put_usb3_hcd;
	/* Roothub already marked as USB 3.0 speed */
	return 0;

put_usb3_hcd:
	usb_put_hcd(xhci->shared_hcd);
dealloc_usb2_hcd:
	usb_hcd_pci_remove(dev);
	return retval;
}

static void xhci_pci_remove(struct pci_dev *dev)
{
	struct xhci_hcd *xhci;

	xhci = hcd_to_xhci(pci_get_drvdata(dev));
	if (xhci->shared_hcd) {
		usb_remove_hcd(xhci->shared_hcd);
		usb_put_hcd(xhci->shared_hcd);
	}
	usb_hcd_pci_remove(dev);
	kfree(xhci);
}

#ifdef CONFIG_PM
static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
{
	struct xhci_hcd	*xhci = hcd_to_xhci(hcd);
	int	retval = 0;

	if (hcd->state != HC_STATE_SUSPENDED ||
			xhci->shared_hcd->state != HC_STATE_SUSPENDED)
		return -EINVAL;

	retval = xhci_suspend(xhci);

	return retval;
}

static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
{
	struct xhci_hcd		*xhci = hcd_to_xhci(hcd);
	struct pci_dev		*pdev = to_pci_dev(hcd->self.controller);
	int			retval = 0;

	/* The BIOS on systems with the Intel Panther Point chipset may or may
	 * not support xHCI natively.  That means that during system resume, it
	 * may switch the ports back to EHCI so that users can use their
	 * keyboard to select a kernel from GRUB after resume from hibernate.
	 *
	 * The BIOS is supposed to remember whether the OS had xHCI ports
	 * enabled before resume, and switch the ports back to xHCI when the
	 * BIOS/OS semaphore is written, but we all know we can't trust BIOS
	 * writers.
	 *
	 * Unconditionally switch the ports back to xHCI after a system resume.
	 * We can't tell whether the EHCI or xHCI controller will be resumed
	 * first, so we have to do the port switchover in both drivers.  Writing
	 * a '1' to the port switchover registers should have no effect if the
	 * port was already switched over.
	 */
	if (usb_is_intel_switchable_xhci(pdev))
		usb_enable_xhci_ports(pdev);

	retval = xhci_resume(xhci, hibernated);
	return retval;
}
#endif /* CONFIG_PM */

static const struct hc_driver xhci_pci_hc_driver = {
	.description =		hcd_name,
	.product_desc =		"xHCI Host Controller",
	.hcd_priv_size =	sizeof(struct xhci_hcd *),

	/*
	 * generic hardware linkage
	 */
	.irq =			xhci_irq,
	.flags =		HCD_MEMORY | HCD_USB3 | HCD_SHARED,

	/*
	 * basic lifecycle operations
	 */
	.reset =		xhci_pci_setup,
	.start =		xhci_run,
#ifdef CONFIG_PM
	.pci_suspend =          xhci_pci_suspend,
	.pci_resume =           xhci_pci_resume,
#endif
	.stop =			xhci_stop,
	.shutdown =		xhci_shutdown,

	/*
	 * managing i/o requests and associated device resources
	 */
	.urb_enqueue =		xhci_urb_enqueue,
	.urb_dequeue =		xhci_urb_dequeue,
	.alloc_dev =		xhci_alloc_dev,
	.free_dev =		xhci_free_dev,
	.alloc_streams =	xhci_alloc_streams,
	.free_streams =		xhci_free_streams,
	.add_endpoint =		xhci_add_endpoint,
	.drop_endpoint =	xhci_drop_endpoint,
	.endpoint_reset =	xhci_endpoint_reset,
	.check_bandwidth =	xhci_check_bandwidth,
	.reset_bandwidth =	xhci_reset_bandwidth,
	.address_device =	xhci_address_device,
	.update_hub_device =	xhci_update_hub_device,
	.reset_device =		xhci_discover_or_reset_device,

	/*
	 * scheduling support
	 */
	.get_frame_number =	xhci_get_frame,

	/* Root hub support */
	.hub_control =		xhci_hub_control,
	.hub_status_data =	xhci_hub_status_data,
	.bus_suspend =		xhci_bus_suspend,
	.bus_resume =		xhci_bus_resume,
	/*
	 * call back when device connected and addressed
	 */
	.update_device =        xhci_update_device,
	.set_usb2_hw_lpm =	xhci_set_usb2_hardware_lpm,
};

/*-------------------------------------------------------------------------*/

/* PCI driver selection metadata; PCI hotplugging uses this */
static const struct pci_device_id pci_ids[] = { {
	/* handle any USB 3.0 xHCI controller */
	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0),
	.driver_data =	(unsigned long) &xhci_pci_hc_driver,
	},
	{ /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE(pci, pci_ids);

/* pci driver glue; this is a "new style" PCI driver module */
static struct pci_driver xhci_pci_driver = {
	.name =		(char *) hcd_name,
	.id_table =	pci_ids,

	.probe =	xhci_pci_probe,
	.remove =	xhci_pci_remove,
	/* suspend and resume implemented later */

	.shutdown = 	usb_hcd_pci_shutdown,
#ifdef CONFIG_PM_SLEEP
	.driver = {
		.pm = &usb_hcd_pci_pm_ops
	},
#endif
};

int xhci_register_pci(void)
{
	return pci_register_driver(&xhci_pci_driver);
}

void xhci_unregister_pci(void)
{
	pci_unregister_driver(&xhci_pci_driver);
}
Commit	Line	Data
66d4eadd SS	1	/*
	2	* xHCI host controller driver PCI Bus Glue.
	3	*
	4	* Copyright (C) 2008 Intel Corp.
	5	*
	6	* Author: Sarah Sharp
	7	* Some code borrowed from the Linux EHCI driver.
	8	*
	9	* This program is free software; you can redistribute it and/or modify
	10	* it under the terms of the GNU General Public License version 2 as
	11	* published by the Free Software Foundation.
	12	*
	13	* This program is distributed in the hope that it will be useful, but
	14	* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
	15	* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
	16	* for more details.
	17	*
	18	* You should have received a copy of the GNU General Public License
	19	* along with this program; if not, write to the Free Software Foundation,
	20	* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
	21	*/
	22
	23	#include <linux/pci.h>
7fc2a616	24	#include <linux/slab.h>
66d4eadd SS	25
	26	#include "xhci.h"
	27
ac9d8fe7 SS	28	/* Device for a quirk */
	29	#define PCI_VENDOR_ID_FRESCO_LOGIC 0x1b73
	30	#define PCI_DEVICE_ID_FRESCO_LOGIC_PDK 0x1000
	31
c877b3b2 ML	32	#define PCI_VENDOR_ID_ETRON 0x1b6f
	33	#define PCI_DEVICE_ID_ASROCK_P67 0x7023
	34
66d4eadd SS	35	static const char hcd_name[] = "xhci_hcd";
	36
	37	/* called after powerup, by probe or system-pm "wakeup" */
	38	static int xhci_pci_reinit(struct xhci_hcd xhci, struct pci_dev pdev)
	39	{
	40	/*
	41	* TODO: Implement finding debug ports later.
	42	* TODO: see if there are any quirks that need to be added to handle
	43	* new extended capabilities.
	44	*/
	45
	46	/* PCI Memory-Write-Invalidate cycle support is optional (uncommon) */
	47	if (!pci_set_mwi(pdev))
	48	xhci_dbg(xhci, "MWI active\n");
	49
	50	xhci_dbg(xhci, "Finished xhci_pci_reinit\n");
	51	return 0;
	52	}
	53
	54	/* called during probe() after chip reset completes */
	55	static int xhci_pci_setup(struct usb_hcd *hcd)
	56	{
f6ff0ac8	57	struct xhci_hcd *xhci;
66d4eadd SS	58	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
66d4eadd SS	59	int retval;
006d5820	60	u32 temp;
66d4eadd	61
bc88d2eb	62	hcd->self.sg_tablesize = TRBS_PER_SEGMENT - 2;
4c1bd3d7	63
f6ff0ac8 SS	64	if (usb_hcd_is_primary_hcd(hcd)) {
	65	xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL);
	66	if (!xhci)
	67	return -ENOMEM;
	68	((struct xhci_hcd *) hcd->hcd_priv) = xhci;
	69	xhci->main_hcd = hcd;
	70	/* Mark the first roothub as being USB 2.0.
	71	* The xHCI driver will register the USB 3.0 roothub.
	72	*/
	73	hcd->speed = HCD_USB2;
	74	hcd->self.root_hub->speed = USB_SPEED_HIGH;
	75	/*
	76	* USB 2.0 roothub under xHCI has an integrated TT,
	77	* (rate matching hub) as opposed to having an OHCI/UHCI
	78	* companion controller.
	79	*/
	80	hcd->has_tt = 1;
	81	} else {
	82	/* xHCI private pointer was set in xhci_pci_probe for the second
	83	* registered roothub.
	84	*/
	85	xhci = hcd_to_xhci(hcd);
	86	temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
	87	if (HCC_64BIT_ADDR(temp)) {
	88	xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
	89	dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64));
	90	} else {
	91	dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32));
	92	}
	93	return 0;
	94	}
b02d0ed6	95
66d4eadd SS	96	xhci->cap_regs = hcd->regs;
	97	xhci->op_regs = hcd->regs +
	98	HC_LENGTH(xhci_readl(xhci, &xhci->cap_regs->hc_capbase));
	99	xhci->run_regs = hcd->regs +
	100	(xhci_readl(xhci, &xhci->cap_regs->run_regs_off) & RTSOFF_MASK);
	101	/* Cache read-only capability registers */
	102	xhci->hcs_params1 = xhci_readl(xhci, &xhci->cap_regs->hcs_params1);
	103	xhci->hcs_params2 = xhci_readl(xhci, &xhci->cap_regs->hcs_params2);
	104	xhci->hcs_params3 = xhci_readl(xhci, &xhci->cap_regs->hcs_params3);
ac1c1b7f SS	105	xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hc_capbase);
ac1c1b7f SS	106	xhci->hci_version = HC_VERSION(xhci->hcc_params);
66d4eadd SS	107	xhci->hcc_params = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
	108	xhci_print_registers(xhci);
	109
ac9d8fe7 SS	110	/* Look for vendor-specific quirks */
ac9d8fe7 SS	111	if (pdev->vendor == PCI_VENDOR_ID_FRESCO_LOGIC &&
f5182b41 SS	112	pdev->device == PCI_DEVICE_ID_FRESCO_LOGIC_PDK) {
f5182b41 SS	113	if (pdev->revision == 0x0) {
ac9d8fe7 SS	114	xhci->quirks \|= XHCI_RESET_EP_QUIRK;
	115	xhci_dbg(xhci, "QUIRK: Fresco Logic xHC needs configure"
	116	" endpoint cmd after reset endpoint\n");
f5182b41 SS	117	}
	118	/* Fresco Logic confirms: all revisions of this chip do not
	119	* support MSI, even though some of them claim to in their PCI
	120	* capabilities.
	121	*/
	122	xhci->quirks \|= XHCI_BROKEN_MSI;
	123	xhci_dbg(xhci, "QUIRK: Fresco Logic revision %u "
	124	"has broken MSI implementation\n",
	125	pdev->revision);
ac9d8fe7	126	}
f5182b41	127
0238634d SS	128	if (pdev->vendor == PCI_VENDOR_ID_NEC)
0238634d SS	129	xhci->quirks \|= XHCI_NEC_HOST;
ac9d8fe7	130
7e393a83 AX	131	if (pdev->vendor == PCI_VENDOR_ID_AMD && xhci->hci_version == 0x96)
	132	xhci->quirks \|= XHCI_AMD_0x96_HOST;
	133
c41136b0 AX	134	/* AMD PLL quirk */
	135	if (pdev->vendor == PCI_VENDOR_ID_AMD && usb_amd_find_chipset_info())
	136	xhci->quirks \|= XHCI_AMD_PLL_FIX;
ad808333 SS	137	if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
	138	pdev->device == PCI_DEVICE_ID_INTEL_PANTHERPOINT_XHCI) {
	139	xhci->quirks \|= XHCI_SPURIOUS_SUCCESS;
2cf95c18 SS	140	xhci->quirks \|= XHCI_EP_LIMIT_QUIRK;
2cf95c18 SS	141	xhci->limit_active_eps = 64;
86cc558e	142	xhci->quirks \|= XHCI_SW_BW_CHECKING;
ad808333	143	}
c877b3b2 ML	144	if (pdev->vendor == PCI_VENDOR_ID_ETRON &&
	145	pdev->device == PCI_DEVICE_ID_ASROCK_P67) {
	146	xhci->quirks \|= XHCI_RESET_ON_RESUME;
	147	xhci_dbg(xhci, "QUIRK: Resetting on resume\n");
	148	}
c41136b0	149
66d4eadd SS	150	/* Make sure the HC is halted. */
	151	retval = xhci_halt(xhci);
	152	if (retval)
b02d0ed6	153	goto error;
66d4eadd SS	154
	155	xhci_dbg(xhci, "Resetting HCD\n");
	156	/* Reset the internal HC memory state and registers. */
	157	retval = xhci_reset(xhci);
	158	if (retval)
b02d0ed6	159	goto error;
66d4eadd SS	160	xhci_dbg(xhci, "Reset complete\n");
66d4eadd SS	161
006d5820 SS	162	temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params);
	163	if (HCC_64BIT_ADDR(temp)) {
	164	xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n");
	165	dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64));
	166	} else {
	167	dma_set_mask(hcd->self.controller, DMA_BIT_MASK(32));
	168	}
	169
66d4eadd SS	170	xhci_dbg(xhci, "Calling HCD init\n");
	171	/* Initialize HCD and host controller data structures. */
	172	retval = xhci_init(hcd);
	173	if (retval)
b02d0ed6	174	goto error;
66d4eadd SS	175	xhci_dbg(xhci, "Called HCD init\n");
	176
	177	pci_read_config_byte(pdev, XHCI_SBRN_OFFSET, &xhci->sbrn);
	178	xhci_dbg(xhci, "Got SBRN %u\n", (unsigned int) xhci->sbrn);
	179
	180	/* Find any debug ports */
b02d0ed6 SS	181	retval = xhci_pci_reinit(xhci, pdev);
	182	if (!retval)
	183	return retval;
	184
	185	error:
	186	kfree(xhci);
	187	return retval;
	188	}
	189
f6ff0ac8 SS	190	/*
	191	* We need to register our own PCI probe function (instead of the USB core's
	192	* function) in order to create a second roothub under xHCI.
	193	*/
	194	static int xhci_pci_probe(struct pci_dev dev, const struct pci_device_id id)
	195	{
	196	int retval;
	197	struct xhci_hcd *xhci;
	198	struct hc_driver *driver;
	199	struct usb_hcd *hcd;
	200
	201	driver = (struct hc_driver *)id->driver_data;
	202	/* Register the USB 2.0 roothub.
	203	* FIXME: USB core must know to register the USB 2.0 roothub first.
	204	* This is sort of silly, because we could just set the HCD driver flags
	205	* to say USB 2.0, but I'm not sure what the implications would be in
	206	* the other parts of the HCD code.
	207	*/
	208	retval = usb_hcd_pci_probe(dev, id);
	209
	210	if (retval)
	211	return retval;
	212
	213	/* USB 2.0 roothub is stored in the PCI device now. */
	214	hcd = dev_get_drvdata(&dev->dev);
	215	xhci = hcd_to_xhci(hcd);
	216	xhci->shared_hcd = usb_create_shared_hcd(driver, &dev->dev,
	217	pci_name(dev), hcd);
	218	if (!xhci->shared_hcd) {
	219	retval = -ENOMEM;
	220	goto dealloc_usb2_hcd;
	221	}
	222
	223	/* Set the xHCI pointer before xhci_pci_setup() (aka hcd_driver.reset)
	224	* is called by usb_add_hcd().
	225	*/
	226	((struct xhci_hcd *) xhci->shared_hcd->hcd_priv) = xhci;
	227
	228	retval = usb_add_hcd(xhci->shared_hcd, dev->irq,
b5dd18d8	229	IRQF_SHARED);
f6ff0ac8 SS	230	if (retval)
	231	goto put_usb3_hcd;
	232	/* Roothub already marked as USB 3.0 speed */
	233	return 0;
	234
	235	put_usb3_hcd:
	236	usb_put_hcd(xhci->shared_hcd);
	237	dealloc_usb2_hcd:
	238	usb_hcd_pci_remove(dev);
	239	return retval;
	240	}
	241
b02d0ed6 SS	242	static void xhci_pci_remove(struct pci_dev *dev)
	243	{
	244	struct xhci_hcd *xhci;
	245
	246	xhci = hcd_to_xhci(pci_get_drvdata(dev));
f6ff0ac8 SS	247	if (xhci->shared_hcd) {
	248	usb_remove_hcd(xhci->shared_hcd);
	249	usb_put_hcd(xhci->shared_hcd);
	250	}
b02d0ed6 SS	251	usb_hcd_pci_remove(dev);
b02d0ed6 SS	252	kfree(xhci);
66d4eadd SS	253	}
66d4eadd SS	254
5535b1d5 AX	255	#ifdef CONFIG_PM
	256	static int xhci_pci_suspend(struct usb_hcd *hcd, bool do_wakeup)
	257	{
	258	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
	259	int retval = 0;
	260
b3209379 SS	261	if (hcd->state != HC_STATE_SUSPENDED \|\|
b3209379 SS	262	xhci->shared_hcd->state != HC_STATE_SUSPENDED)
5535b1d5 AX	263	return -EINVAL;
	264
	265	retval = xhci_suspend(xhci);
	266
	267	return retval;
	268	}
	269
	270	static int xhci_pci_resume(struct usb_hcd *hcd, bool hibernated)
	271	{
	272	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
69e848c2	273	struct pci_dev *pdev = to_pci_dev(hcd->self.controller);
5535b1d5 AX	274	int retval = 0;
5535b1d5 AX	275
69e848c2 SS	276	/* The BIOS on systems with the Intel Panther Point chipset may or may
	277	* not support xHCI natively. That means that during system resume, it
	278	* may switch the ports back to EHCI so that users can use their
	279	* keyboard to select a kernel from GRUB after resume from hibernate.
	280	*
	281	* The BIOS is supposed to remember whether the OS had xHCI ports
	282	* enabled before resume, and switch the ports back to xHCI when the
	283	* BIOS/OS semaphore is written, but we all know we can't trust BIOS
	284	* writers.
	285	*
	286	* Unconditionally switch the ports back to xHCI after a system resume.
	287	* We can't tell whether the EHCI or xHCI controller will be resumed
	288	* first, so we have to do the port switchover in both drivers. Writing
	289	* a '1' to the port switchover registers should have no effect if the
	290	* port was already switched over.
	291	*/
	292	if (usb_is_intel_switchable_xhci(pdev))
	293	usb_enable_xhci_ports(pdev);
	294
5535b1d5 AX	295	retval = xhci_resume(xhci, hibernated);
	296	return retval;
	297	}
	298	#endif /* CONFIG_PM */
	299
66d4eadd SS	300	static const struct hc_driver xhci_pci_hc_driver = {
	301	.description = hcd_name,
	302	.product_desc = "xHCI Host Controller",
b02d0ed6	303	.hcd_priv_size = sizeof(struct xhci_hcd *),
66d4eadd SS	304
	305	/*
	306	* generic hardware linkage
	307	*/
7f84eef0	308	.irq = xhci_irq,
f6ff0ac8	309	.flags = HCD_MEMORY \| HCD_USB3 \| HCD_SHARED,
66d4eadd SS	310
	311	/*
	312	* basic lifecycle operations
	313	*/
	314	.reset = xhci_pci_setup,
	315	.start = xhci_run,
5535b1d5 AX	316	#ifdef CONFIG_PM
	317	.pci_suspend = xhci_pci_suspend,
	318	.pci_resume = xhci_pci_resume,
	319	#endif
66d4eadd SS	320	.stop = xhci_stop,
	321	.shutdown = xhci_shutdown,
	322
3ffbba95 SS	323	/*
	324	* managing i/o requests and associated device resources
	325	*/
d0e96f5a SS	326	.urb_enqueue = xhci_urb_enqueue,
d0e96f5a SS	327	.urb_dequeue = xhci_urb_dequeue,
3ffbba95 SS	328	.alloc_dev = xhci_alloc_dev,
3ffbba95 SS	329	.free_dev = xhci_free_dev,
eab1cafc SS	330	.alloc_streams = xhci_alloc_streams,
eab1cafc SS	331	.free_streams = xhci_free_streams,
f94e0186 SS	332	.add_endpoint = xhci_add_endpoint,
f94e0186 SS	333	.drop_endpoint = xhci_drop_endpoint,
a1587d97	334	.endpoint_reset = xhci_endpoint_reset,
f94e0186 SS	335	.check_bandwidth = xhci_check_bandwidth,
f94e0186 SS	336	.reset_bandwidth = xhci_reset_bandwidth,
3ffbba95	337	.address_device = xhci_address_device,
b356b7c7	338	.update_hub_device = xhci_update_hub_device,
f0615c45	339	.reset_device = xhci_discover_or_reset_device,
3ffbba95	340
66d4eadd SS	341	/*
	342	* scheduling support
	343	*/
	344	.get_frame_number = xhci_get_frame,
	345
0f2a7930 SS	346	/* Root hub support */
	347	.hub_control = xhci_hub_control,
	348	.hub_status_data = xhci_hub_status_data,
9777e3ce AX	349	.bus_suspend = xhci_bus_suspend,
9777e3ce AX	350	.bus_resume = xhci_bus_resume,
9574323c AX	351	/*
	352	* call back when device connected and addressed
	353	*/
	354	.update_device = xhci_update_device,
65580b43	355	.set_usb2_hw_lpm = xhci_set_usb2_hardware_lpm,
66d4eadd SS	356	};
	357
	358	/-------------------------------------------------------------------------/
	359
	360	/* PCI driver selection metadata; PCI hotplugging uses this */
	361	static const struct pci_device_id pci_ids[] = { {
	362	/* handle any USB 3.0 xHCI controller */
	363	PCI_DEVICE_CLASS(PCI_CLASS_SERIAL_USB_XHCI, ~0),
	364	.driver_data = (unsigned long) &xhci_pci_hc_driver,
	365	},
	366	{ /* end: all zeroes */ }
	367	};
	368	MODULE_DEVICE_TABLE(pci, pci_ids);
	369
	370	/* pci driver glue; this is a "new style" PCI driver module */
	371	static struct pci_driver xhci_pci_driver = {
	372	.name = (char *) hcd_name,
	373	.id_table = pci_ids,
	374
f6ff0ac8	375	.probe = xhci_pci_probe,
b02d0ed6	376	.remove = xhci_pci_remove,
66d4eadd SS	377	/* suspend and resume implemented later */
	378
	379	.shutdown = usb_hcd_pci_shutdown,
5535b1d5 AX	380	#ifdef CONFIG_PM_SLEEP
	381	.driver = {
	382	.pm = &usb_hcd_pci_pm_ops
	383	},
	384	#endif
66d4eadd SS	385	};
66d4eadd SS	386
326b4810	387	int xhci_register_pci(void)
66d4eadd SS	388	{
	389	return pci_register_driver(&xhci_pci_driver);
	390	}
	391
326b4810	392	void xhci_unregister_pci(void)
66d4eadd SS	393	{
	394	pci_unregister_driver(&xhci_pci_driver);
	395	}