[linux-2.6-block.git] / drivers / thermal / da9062-thermal.c

/*
 * Thermal device driver for DA9062 and DA9061
 * Copyright (C) 2017  Dialog Semiconductor
 *
 * This program is free software; you can redistribute it and/or
 * modify it under the terms of the GNU General Public License
 * as published by the Free Software Foundation; either version 2
 * of the License, or (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

/* When over-temperature is reached, an interrupt from the device will be
 * triggered. Following this event the interrupt will be disabled and
 * periodic transmission of uevents (HOT trip point) should define the
 * first level of temperature supervision. It is expected that any final
 * implementation of the thermal driver will include a .notify() function
 * to implement these uevents to userspace.
 *
 * These uevents are intended to indicate non-invasive temperature control
 * of the system, where the necessary measures for cooling are the
 * responsibility of the host software. Once the temperature falls again,
 * the IRQ is re-enabled so the start of a new over-temperature event can
 * be detected without constant software monitoring.
 */

#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/thermal.h>
#include <linux/workqueue.h>

#include <linux/mfd/da9062/core.h>
#include <linux/mfd/da9062/registers.h>

/* Minimum, maximum and default polling millisecond periods are provided
 * here as an example. It is expected that any final implementation to also
 * include a modification of these settings to match the required
 * application.
 */
#define DA9062_DEFAULT_POLLING_MS_PERIOD	3000
#define DA9062_MAX_POLLING_MS_PERIOD		10000
#define DA9062_MIN_POLLING_MS_PERIOD		1000

#define DA9062_MILLI_CELSIUS(t)			((t) * 1000)

struct da9062_thermal_config {
	const char *name;
};

struct da9062_thermal {
	struct da9062 *hw;
	struct delayed_work work;
	struct thermal_zone_device *zone;
	enum thermal_device_mode mode;
	struct mutex lock; /* protection for da9062_thermal temperature */
	int temperature;
	int irq;
	const struct da9062_thermal_config *config;
	struct device *dev;
};

static void da9062_thermal_poll_on(struct work_struct *work)
{
	struct da9062_thermal *thermal = container_of(work,
						struct da9062_thermal,
						work.work);
	unsigned long delay;
	unsigned int val;
	int ret;

	/* clear E_TEMP */
	ret = regmap_write(thermal->hw->regmap,
			   DA9062AA_EVENT_B,
			   DA9062AA_E_TEMP_MASK);
	if (ret < 0) {
		dev_err(thermal->dev,
			"Cannot clear the TJUNC temperature status\n");
		goto err_enable_irq;
	}

	/* Now read E_TEMP again: it is acting like a status bit.
	 * If over-temperature, then this status will be true.
	 * If not over-temperature, this status will be false.
	 */
	ret = regmap_read(thermal->hw->regmap,
			  DA9062AA_EVENT_B,
			  &val);
	if (ret < 0) {
		dev_err(thermal->dev,
			"Cannot check the TJUNC temperature status\n");
		goto err_enable_irq;
	}

	if (val & DA9062AA_E_TEMP_MASK) {
		mutex_lock(&thermal->lock);
		thermal->temperature = DA9062_MILLI_CELSIUS(125);
		mutex_unlock(&thermal->lock);
		thermal_zone_device_update(thermal->zone,
					   THERMAL_EVENT_UNSPECIFIED);

		delay = msecs_to_jiffies(thermal->zone->passive_delay);
		queue_delayed_work(system_freezable_wq, &thermal->work, delay);
		return;
	}

	mutex_lock(&thermal->lock);
	thermal->temperature = DA9062_MILLI_CELSIUS(0);
	mutex_unlock(&thermal->lock);
	thermal_zone_device_update(thermal->zone,
				   THERMAL_EVENT_UNSPECIFIED);

err_enable_irq:
	enable_irq(thermal->irq);
}

static irqreturn_t da9062_thermal_irq_handler(int irq, void *data)
{
	struct da9062_thermal *thermal = data;

	disable_irq_nosync(thermal->irq);
	queue_delayed_work(system_freezable_wq, &thermal->work, 0);

	return IRQ_HANDLED;
}

static int da9062_thermal_get_mode(struct thermal_zone_device *z,
				   enum thermal_device_mode *mode)
{
	struct da9062_thermal *thermal = z->devdata;
	*mode = thermal->mode;
	return 0;
}

static int da9062_thermal_get_trip_type(struct thermal_zone_device *z,
					int trip,
					enum thermal_trip_type *type)
{
	struct da9062_thermal *thermal = z->devdata;

	switch (trip) {
	case 0:
		*type = THERMAL_TRIP_HOT;
		break;
	default:
		dev_err(thermal->dev,
			"Driver does not support more than 1 trip-wire\n");
		return -EINVAL;
	}

	return 0;
}

static int da9062_thermal_get_trip_temp(struct thermal_zone_device *z,
					int trip,
					int *temp)
{
	struct da9062_thermal *thermal = z->devdata;

	switch (trip) {
	case 0:
		*temp = DA9062_MILLI_CELSIUS(125);
		break;
	default:
		dev_err(thermal->dev,
			"Driver does not support more than 1 trip-wire\n");
		return -EINVAL;
	}

	return 0;
}

static int da9062_thermal_get_temp(struct thermal_zone_device *z,
				   int *temp)
{
	struct da9062_thermal *thermal = z->devdata;

	mutex_lock(&thermal->lock);
	*temp = thermal->temperature;
	mutex_unlock(&thermal->lock);

	return 0;
}

static struct thermal_zone_device_ops da9062_thermal_ops = {
	.get_temp	= da9062_thermal_get_temp,
	.get_mode	= da9062_thermal_get_mode,
	.get_trip_type	= da9062_thermal_get_trip_type,
	.get_trip_temp	= da9062_thermal_get_trip_temp,
};

static const struct da9062_thermal_config da9062_config = {
	.name = "da9062-thermal",
};

static const struct of_device_id da9062_compatible_reg_id_table[] = {
	{ .compatible = "dlg,da9062-thermal", .data = &da9062_config },
	{ },
};

MODULE_DEVICE_TABLE(of, da9062_compatible_reg_id_table);

static int da9062_thermal_probe(struct platform_device *pdev)
{
	struct da9062 *chip = dev_get_drvdata(pdev->dev.parent);
	struct da9062_thermal *thermal;
	unsigned int pp_tmp = DA9062_DEFAULT_POLLING_MS_PERIOD;
	const struct of_device_id *match;
	int ret = 0;

	match = of_match_node(da9062_compatible_reg_id_table,
			      pdev->dev.of_node);
	if (!match)
		return -ENXIO;

	if (pdev->dev.of_node) {
		if (!of_property_read_u32(pdev->dev.of_node,
					  "polling-delay-passive",
					  &pp_tmp)) {
			if (pp_tmp < DA9062_MIN_POLLING_MS_PERIOD ||
			    pp_tmp > DA9062_MAX_POLLING_MS_PERIOD) {
				dev_warn(&pdev->dev,
					 "Out-of-range polling period %d ms\n",
					 pp_tmp);
				pp_tmp = DA9062_DEFAULT_POLLING_MS_PERIOD;
			}
		}
	}

	thermal = devm_kzalloc(&pdev->dev, sizeof(struct da9062_thermal),
			       GFP_KERNEL);
	if (!thermal) {
		ret = -ENOMEM;
		goto err;
	}

	thermal->config = match->data;
	thermal->hw = chip;
	thermal->mode = THERMAL_DEVICE_ENABLED;
	thermal->dev = &pdev->dev;

	INIT_DELAYED_WORK(&thermal->work, da9062_thermal_poll_on);
	mutex_init(&thermal->lock);

	thermal->zone = thermal_zone_device_register(thermal->config->name,
					1, 0, thermal,
					&da9062_thermal_ops, NULL, pp_tmp,
					0);
	if (IS_ERR(thermal->zone)) {
		dev_err(&pdev->dev, "Cannot register thermal zone device\n");
		ret = PTR_ERR(thermal->zone);
		goto err;
	}

	dev_dbg(&pdev->dev,
		"TJUNC temperature polling period set at %d ms\n",
		thermal->zone->passive_delay);

	ret = platform_get_irq_byname(pdev, "THERMAL");
	if (ret < 0) {
		dev_err(&pdev->dev, "Failed to get platform IRQ.\n");
		goto err_zone;
	}
	thermal->irq = ret;

	ret = request_threaded_irq(thermal->irq, NULL,
				   da9062_thermal_irq_handler,
				   IRQF_TRIGGER_LOW | IRQF_ONESHOT,
				   "THERMAL", thermal);
	if (ret) {
		dev_err(&pdev->dev,
			"Failed to request thermal device IRQ.\n");
		goto err_zone;
	}

	platform_set_drvdata(pdev, thermal);
	return 0;

err_zone:
	thermal_zone_device_unregister(thermal->zone);
err:
	return ret;
}

static int da9062_thermal_remove(struct platform_device *pdev)
{
	struct	da9062_thermal *thermal = platform_get_drvdata(pdev);

	free_irq(thermal->irq, thermal);
	cancel_delayed_work_sync(&thermal->work);
	thermal_zone_device_unregister(thermal->zone);
	return 0;
}

static struct platform_driver da9062_thermal_driver = {
	.probe	= da9062_thermal_probe,
	.remove	= da9062_thermal_remove,
	.driver	= {
		.name	= "da9062-thermal",
		.of_match_table = da9062_compatible_reg_id_table,
	},
};

module_platform_driver(da9062_thermal_driver);

MODULE_AUTHOR("Steve Twiss");
MODULE_DESCRIPTION("Thermal TJUNC device driver for Dialog DA9062 and DA9061");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:da9062-thermal");
Commit	Line	Data
608567aa ST	1	/*
	2	* Thermal device driver for DA9062 and DA9061
	3	* Copyright (C) 2017 Dialog Semiconductor
	4	*
	5	* This program is free software; you can redistribute it and/or
	6	* modify it under the terms of the GNU General Public License
	7	* as published by the Free Software Foundation; either version 2
	8	* of the License, or (at your option) any later version.
	9	*
	10	* This program is distributed in the hope that it will be useful,
	11	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	12	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	13	* GNU General Public License for more details.
	14	*/
	15
	16	/* When over-temperature is reached, an interrupt from the device will be
	17	* triggered. Following this event the interrupt will be disabled and
	18	* periodic transmission of uevents (HOT trip point) should define the
	19	* first level of temperature supervision. It is expected that any final
	20	* implementation of the thermal driver will include a .notify() function
	21	* to implement these uevents to userspace.
	22	*
	23	* These uevents are intended to indicate non-invasive temperature control
	24	* of the system, where the necessary measures for cooling are the
	25	* responsibility of the host software. Once the temperature falls again,
	26	* the IRQ is re-enabled so the start of a new over-temperature event can
	27	* be detected without constant software monitoring.
	28	*/
	29
	30	#include <linux/errno.h>
	31	#include <linux/interrupt.h>
	32	#include <linux/module.h>
	33	#include <linux/of.h>
	34	#include <linux/platform_device.h>
	35	#include <linux/regmap.h>
	36	#include <linux/thermal.h>
	37	#include <linux/workqueue.h>
	38
	39	#include <linux/mfd/da9062/core.h>
	40	#include <linux/mfd/da9062/registers.h>
	41
	42	/* Minimum, maximum and default polling millisecond periods are provided
	43	* here as an example. It is expected that any final implementation to also
	44	* include a modification of these settings to match the required
	45	* application.
	46	*/
	47	#define DA9062_DEFAULT_POLLING_MS_PERIOD 3000
	48	#define DA9062_MAX_POLLING_MS_PERIOD 10000
	49	#define DA9062_MIN_POLLING_MS_PERIOD 1000
	50
	51	#define DA9062_MILLI_CELSIUS(t) ((t) * 1000)
	52
	53	struct da9062_thermal_config {
	54	const char *name;
	55	};
	56
	57	struct da9062_thermal {
	58	struct da9062 *hw;
	59	struct delayed_work work;
	60	struct thermal_zone_device *zone;
	61	enum thermal_device_mode mode;
	62	struct mutex lock; /* protection for da9062_thermal temperature */
	63	int temperature;
	64	int irq;
65	const struct da9062_thermal_config *config;
66	struct device *dev;
67	};
68
69	static void da9062_thermal_poll_on(struct work_struct *work)
70	{
71	struct da9062_thermal *thermal = container_of(work,
72	struct da9062_thermal,
73	work.work);
74	unsigned long delay;
75	unsigned int val;
76	int ret;
77
78	/* clear E_TEMP */
79	ret = regmap_write(thermal->hw->regmap,
80	DA9062AA_EVENT_B,
81	DA9062AA_E_TEMP_MASK);
82	if (ret < 0) {
83	dev_err(thermal->dev,
84	"Cannot clear the TJUNC temperature status\n");
85	goto err_enable_irq;
86	}
87
88	/* Now read E_TEMP again: it is acting like a status bit.
89	* If over-temperature, then this status will be true.
90	* If not over-temperature, this status will be false.
91	*/
92	ret = regmap_read(thermal->hw->regmap,
93	DA9062AA_EVENT_B,
94	&val);
95	if (ret < 0) {
96	dev_err(thermal->dev,
97	"Cannot check the TJUNC temperature status\n");
98	goto err_enable_irq;
99	}
100
101	if (val & DA9062AA_E_TEMP_MASK) {
102	mutex_lock(&thermal->lock);
103	thermal->temperature = DA9062_MILLI_CELSIUS(125);
104	mutex_unlock(&thermal->lock);
105	thermal_zone_device_update(thermal->zone,
106	THERMAL_EVENT_UNSPECIFIED);
107
108	delay = msecs_to_jiffies(thermal->zone->passive_delay);
760eea43	109	queue_delayed_work(system_freezable_wq, &thermal->work, delay);
608567aa ST	110	return;
	111	}
	112
	113	mutex_lock(&thermal->lock);
	114	thermal->temperature = DA9062_MILLI_CELSIUS(0);
	115	mutex_unlock(&thermal->lock);
	116	thermal_zone_device_update(thermal->zone,
	117	THERMAL_EVENT_UNSPECIFIED);
	118
	119	err_enable_irq:
	120	enable_irq(thermal->irq);
	121	}
	122
	123	static irqreturn_t da9062_thermal_irq_handler(int irq, void *data)
	124	{
	125	struct da9062_thermal *thermal = data;
	126
	127	disable_irq_nosync(thermal->irq);
760eea43	128	queue_delayed_work(system_freezable_wq, &thermal->work, 0);
608567aa ST	129
	130	return IRQ_HANDLED;
	131	}
	132
	133	static int da9062_thermal_get_mode(struct thermal_zone_device *z,
	134	enum thermal_device_mode *mode)
	135	{
	136	struct da9062_thermal *thermal = z->devdata;
	137	*mode = thermal->mode;
	138	return 0;
	139	}
	140
	141	static int da9062_thermal_get_trip_type(struct thermal_zone_device *z,
	142	int trip,
	143	enum thermal_trip_type *type)
	144	{
	145	struct da9062_thermal *thermal = z->devdata;
	146
	147	switch (trip) {
	148	case 0:
	149	*type = THERMAL_TRIP_HOT;
	150	break;
	151	default:
	152	dev_err(thermal->dev,
	153	"Driver does not support more than 1 trip-wire\n");
	154	return -EINVAL;
	155	}
	156
	157	return 0;
	158	}
	159
	160	static int da9062_thermal_get_trip_temp(struct thermal_zone_device *z,
	161	int trip,
	162	int *temp)
	163	{
	164	struct da9062_thermal *thermal = z->devdata;
	165
	166	switch (trip) {
	167	case 0:
	168	*temp = DA9062_MILLI_CELSIUS(125);
	169	break;
	170	default:
	171	dev_err(thermal->dev,
	172	"Driver does not support more than 1 trip-wire\n");
	173	return -EINVAL;
	174	}
	175
	176	return 0;
	177	}
	178
	179	static int da9062_thermal_get_temp(struct thermal_zone_device *z,
	180	int *temp)
	181	{
	182	struct da9062_thermal *thermal = z->devdata;
	183
	184	mutex_lock(&thermal->lock);
	185	*temp = thermal->temperature;
	186	mutex_unlock(&thermal->lock);
	187
	188	return 0;
	189	}
	190
	191	static struct thermal_zone_device_ops da9062_thermal_ops = {
	192	.get_temp = da9062_thermal_get_temp,
193	.get_mode = da9062_thermal_get_mode,
194	.get_trip_type = da9062_thermal_get_trip_type,
195	.get_trip_temp = da9062_thermal_get_trip_temp,
196	};
197
198	static const struct da9062_thermal_config da9062_config = {
199	.name = "da9062-thermal",
200	};
201
202	static const struct of_device_id da9062_compatible_reg_id_table[] = {
203	{ .compatible = "dlg,da9062-thermal", .data = &da9062_config },
204	{ },
205	};
206
207	MODULE_DEVICE_TABLE(of, da9062_compatible_reg_id_table);
208
209	static int da9062_thermal_probe(struct platform_device *pdev)
210	{
211	struct da9062 *chip = dev_get_drvdata(pdev->dev.parent);
212	struct da9062_thermal *thermal;
213	unsigned int pp_tmp = DA9062_DEFAULT_POLLING_MS_PERIOD;
214	const struct of_device_id *match;
215	int ret = 0;
216
217	match = of_match_node(da9062_compatible_reg_id_table,
218	pdev->dev.of_node);
219	if (!match)
220	return -ENXIO;
221
222	if (pdev->dev.of_node) {
223	if (!of_property_read_u32(pdev->dev.of_node,
224	"polling-delay-passive",
225	&pp_tmp)) {
226	if (pp_tmp < DA9062_MIN_POLLING_MS_PERIOD \|\|
227	pp_tmp > DA9062_MAX_POLLING_MS_PERIOD) {
228	dev_warn(&pdev->dev,
229	"Out-of-range polling period %d ms\n",
230	pp_tmp);
231	pp_tmp = DA9062_DEFAULT_POLLING_MS_PERIOD;
232	}
233	}
234	}
235
236	thermal = devm_kzalloc(&pdev->dev, sizeof(struct da9062_thermal),
237	GFP_KERNEL);
238	if (!thermal) {
239	ret = -ENOMEM;
240	goto err;
241	}
242
243	thermal->config = match->data;
244	thermal->hw = chip;
245	thermal->mode = THERMAL_DEVICE_ENABLED;
246	thermal->dev = &pdev->dev;
247
248	INIT_DELAYED_WORK(&thermal->work, da9062_thermal_poll_on);
249	mutex_init(&thermal->lock);
250
251	thermal->zone = thermal_zone_device_register(thermal->config->name,
252	1, 0, thermal,
253	&da9062_thermal_ops, NULL, pp_tmp,
254	0);
255	if (IS_ERR(thermal->zone)) {
256	dev_err(&pdev->dev, "Cannot register thermal zone device\n");
257	ret = PTR_ERR(thermal->zone);
258	goto err;
259	}
260
261	dev_dbg(&pdev->dev,
262	"TJUNC temperature polling period set at %d ms\n",
263	thermal->zone->passive_delay);
264
265	ret = platform_get_irq_byname(pdev, "THERMAL");
266	if (ret < 0) {
267	dev_err(&pdev->dev, "Failed to get platform IRQ.\n");
268	goto err_zone;
269	}
270	thermal->irq = ret;
271
272	ret = request_threaded_irq(thermal->irq, NULL,
273	da9062_thermal_irq_handler,
274	IRQF_TRIGGER_LOW \| IRQF_ONESHOT,
275	"THERMAL", thermal);
276	if (ret) {
277	dev_err(&pdev->dev,
278	"Failed to request thermal device IRQ.\n");
279	goto err_zone;
280	}
281
282	platform_set_drvdata(pdev, thermal);
283	return 0;
284
285	err_zone:
286	thermal_zone_device_unregister(thermal->zone);
287	err:
288	return ret;
289	}
290
291	static int da9062_thermal_remove(struct platform_device *pdev)
292	{
293	struct da9062_thermal *thermal = platform_get_drvdata(pdev);
294
295	free_irq(thermal->irq, thermal);
296	cancel_delayed_work_sync(&thermal->work);
297	thermal_zone_device_unregister(thermal->zone);
298	return 0;
299	}
300
301	static struct platform_driver da9062_thermal_driver = {
302	.probe = da9062_thermal_probe,
303	.remove = da9062_thermal_remove,
304	.driver = {
305	.name = "da9062-thermal",
306	.of_match_table = da9062_compatible_reg_id_table,
307	},
308	};
309
310	module_platform_driver(da9062_thermal_driver);
311
312	MODULE_AUTHOR("Steve Twiss");
313	MODULE_DESCRIPTION("Thermal TJUNC device driver for Dialog DA9062 and DA9061");
314	MODULE_LICENSE("GPL");
315	MODULE_ALIAS("platform:da9062-thermal");