[SCSI] fix compile error on module_refcount
[linux-2.6-block.git] / drivers / scsi / a2091.c
CommitLineData
1da177e4
LT
1#include <linux/types.h>
2#include <linux/mm.h>
3#include <linux/blkdev.h>
4#include <linux/sched.h>
1da177e4
LT
5#include <linux/init.h>
6#include <linux/interrupt.h>
7
8#include <asm/setup.h>
9#include <asm/page.h>
10#include <asm/pgtable.h>
11#include <asm/amigaints.h>
12#include <asm/amigahw.h>
13#include <linux/zorro.h>
14#include <asm/irq.h>
15#include <linux/spinlock.h>
16
17#include "scsi.h"
18#include <scsi/scsi_host.h>
19#include "wd33c93.h"
20#include "a2091.h"
21
22#include<linux/stat.h>
23
24#define DMA(ptr) ((a2091_scsiregs *)((ptr)->base))
25#define HDATA(ptr) ((struct WD33C93_hostdata *)((ptr)->hostdata))
26
27static irqreturn_t a2091_intr (int irq, void *_instance, struct pt_regs *fp)
28{
29 unsigned long flags;
30 unsigned int status;
31 struct Scsi_Host *instance = (struct Scsi_Host *)_instance;
32
33 status = DMA(instance)->ISTR;
34 if (!(status & (ISTR_INT_F|ISTR_INT_P)) || !(status & ISTR_INTS))
35 return IRQ_NONE;
36
37 spin_lock_irqsave(instance->host_lock, flags);
38 wd33c93_intr(instance);
39 spin_unlock_irqrestore(instance->host_lock, flags);
40 return IRQ_HANDLED;
41}
42
43static int dma_setup (Scsi_Cmnd *cmd, int dir_in)
44{
45 unsigned short cntr = CNTR_PDMD | CNTR_INTEN;
46 unsigned long addr = virt_to_bus(cmd->SCp.ptr);
47 struct Scsi_Host *instance = cmd->device->host;
48
49 /* don't allow DMA if the physical address is bad */
50 if (addr & A2091_XFER_MASK ||
51 (!dir_in && mm_end_of_chunk (addr, cmd->SCp.this_residual)))
52 {
53 HDATA(instance)->dma_bounce_len = (cmd->SCp.this_residual + 511)
54 & ~0x1ff;
55 HDATA(instance)->dma_bounce_buffer =
56 kmalloc (HDATA(instance)->dma_bounce_len, GFP_KERNEL);
57
58 /* can't allocate memory; use PIO */
59 if (!HDATA(instance)->dma_bounce_buffer) {
60 HDATA(instance)->dma_bounce_len = 0;
61 return 1;
62 }
63
64 /* get the physical address of the bounce buffer */
65 addr = virt_to_bus(HDATA(instance)->dma_bounce_buffer);
66
67 /* the bounce buffer may not be in the first 16M of physmem */
68 if (addr & A2091_XFER_MASK) {
69 /* we could use chipmem... maybe later */
70 kfree (HDATA(instance)->dma_bounce_buffer);
71 HDATA(instance)->dma_bounce_buffer = NULL;
72 HDATA(instance)->dma_bounce_len = 0;
73 return 1;
74 }
75
76 if (!dir_in) {
77 /* copy to bounce buffer for a write */
78 if (cmd->use_sg)
79#if 0
80 panic ("scsi%ddma: incomplete s/g support",
81 instance->host_no);
82#else
83 memcpy (HDATA(instance)->dma_bounce_buffer,
84 cmd->SCp.ptr, cmd->SCp.this_residual);
85#endif
86 else
87 memcpy (HDATA(instance)->dma_bounce_buffer,
88 cmd->request_buffer, cmd->request_bufflen);
89 }
90 }
91
92 /* setup dma direction */
93 if (!dir_in)
94 cntr |= CNTR_DDIR;
95
96 /* remember direction */
97 HDATA(cmd->device->host)->dma_dir = dir_in;
98
99 DMA(cmd->device->host)->CNTR = cntr;
100
101 /* setup DMA *physical* address */
102 DMA(cmd->device->host)->ACR = addr;
103
104 if (dir_in){
105 /* invalidate any cache */
106 cache_clear (addr, cmd->SCp.this_residual);
107 }else{
108 /* push any dirty cache */
109 cache_push (addr, cmd->SCp.this_residual);
110 }
111 /* start DMA */
112 DMA(cmd->device->host)->ST_DMA = 1;
113
114 /* return success */
115 return 0;
116}
117
118static void dma_stop (struct Scsi_Host *instance, Scsi_Cmnd *SCpnt,
119 int status)
120{
121 /* disable SCSI interrupts */
122 unsigned short cntr = CNTR_PDMD;
123
124 if (!HDATA(instance)->dma_dir)
125 cntr |= CNTR_DDIR;
126
127 /* disable SCSI interrupts */
128 DMA(instance)->CNTR = cntr;
129
130 /* flush if we were reading */
131 if (HDATA(instance)->dma_dir) {
132 DMA(instance)->FLUSH = 1;
133 while (!(DMA(instance)->ISTR & ISTR_FE_FLG))
134 ;
135 }
136
137 /* clear a possible interrupt */
138 DMA(instance)->CINT = 1;
139
140 /* stop DMA */
141 DMA(instance)->SP_DMA = 1;
142
143 /* restore the CONTROL bits (minus the direction flag) */
144 DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN;
145
146 /* copy from a bounce buffer, if necessary */
147 if (status && HDATA(instance)->dma_bounce_buffer) {
148 if (SCpnt && SCpnt->use_sg) {
149#if 0
150 panic ("scsi%d: incomplete s/g support",
151 instance->host_no);
152#else
153 if( HDATA(instance)->dma_dir )
154 memcpy (SCpnt->SCp.ptr,
155 HDATA(instance)->dma_bounce_buffer,
156 SCpnt->SCp.this_residual);
157 kfree (HDATA(instance)->dma_bounce_buffer);
158 HDATA(instance)->dma_bounce_buffer = NULL;
159 HDATA(instance)->dma_bounce_len = 0;
160
161#endif
162 } else {
163 if (HDATA(instance)->dma_dir && SCpnt)
164 memcpy (SCpnt->request_buffer,
165 HDATA(instance)->dma_bounce_buffer,
166 SCpnt->request_bufflen);
167
168 kfree (HDATA(instance)->dma_bounce_buffer);
169 HDATA(instance)->dma_bounce_buffer = NULL;
170 HDATA(instance)->dma_bounce_len = 0;
171 }
172 }
173}
174
d0be4a7d 175int __init a2091_detect(struct scsi_host_template *tpnt)
1da177e4
LT
176{
177 static unsigned char called = 0;
178 struct Scsi_Host *instance;
179 unsigned long address;
180 struct zorro_dev *z = NULL;
181 wd33c93_regs regs;
182 int num_a2091 = 0;
183
184 if (!MACH_IS_AMIGA || called)
185 return 0;
186 called = 1;
187
188 tpnt->proc_name = "A2091";
189 tpnt->proc_info = &wd33c93_proc_info;
190
191 while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
192 if (z->id != ZORRO_PROD_CBM_A590_A2091_1 &&
193 z->id != ZORRO_PROD_CBM_A590_A2091_2)
194 continue;
195 address = z->resource.start;
196 if (!request_mem_region(address, 256, "wd33c93"))
197 continue;
198
199 instance = scsi_register (tpnt, sizeof (struct WD33C93_hostdata));
200 if (instance == NULL) {
201 release_mem_region(address, 256);
202 continue;
203 }
204 instance->base = ZTWO_VADDR(address);
205 instance->irq = IRQ_AMIGA_PORTS;
206 instance->unique_id = z->slotaddr;
207 DMA(instance)->DAWR = DAWR_A2091;
208 regs.SASR = &(DMA(instance)->SASR);
209 regs.SCMD = &(DMA(instance)->SCMD);
210 wd33c93_init(instance, regs, dma_setup, dma_stop, WD33C93_FS_8_10);
1d6f359a 211 request_irq(IRQ_AMIGA_PORTS, a2091_intr, IRQF_SHARED, "A2091 SCSI",
1da177e4
LT
212 instance);
213 DMA(instance)->CNTR = CNTR_PDMD | CNTR_INTEN;
214 num_a2091++;
215 }
216
217 return num_a2091;
218}
219
220static int a2091_bus_reset(Scsi_Cmnd *cmd)
221{
222 /* FIXME perform bus-specific reset */
68b3aa7c 223
df0ae249
JG
224 /* FIXME 2: kill this function, and let midlayer fall back
225 to the same action, calling wd33c93_host_reset() */
226
68b3aa7c 227 spin_lock_irq(cmd->device->host->host_lock);
1da177e4 228 wd33c93_host_reset(cmd);
68b3aa7c
JG
229 spin_unlock_irq(cmd->device->host->host_lock);
230
1da177e4
LT
231 return SUCCESS;
232}
233
234#define HOSTS_C
235
d0be4a7d 236static struct scsi_host_template driver_template = {
1da177e4
LT
237 .proc_name = "A2901",
238 .name = "Commodore A2091/A590 SCSI",
239 .detect = a2091_detect,
240 .release = a2091_release,
241 .queuecommand = wd33c93_queuecommand,
242 .eh_abort_handler = wd33c93_abort,
243 .eh_bus_reset_handler = a2091_bus_reset,
244 .eh_host_reset_handler = wd33c93_host_reset,
245 .can_queue = CAN_QUEUE,
246 .this_id = 7,
247 .sg_tablesize = SG_ALL,
248 .cmd_per_lun = CMD_PER_LUN,
249 .use_clustering = DISABLE_CLUSTERING
250};
251
252
253#include "scsi_module.c"
254
255int a2091_release(struct Scsi_Host *instance)
256{
257#ifdef MODULE
258 DMA(instance)->CNTR = 0;
259 release_mem_region(ZTWO_PADDR(instance->base), 256);
260 free_irq(IRQ_AMIGA_PORTS, instance);
261 wd33c93_release();
262#endif
263 return 1;
264}
265
266MODULE_LICENSE("GPL");